From 66bde0b70aa2e348ac2c9b9626743c1402b9d466 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 28 Oct 2010 15:41:56 +0200 Subject: dma/intel_mid_dma: remove unneeded null check Smatch complains because we dereference "mid" before checking it. It turns out that "mid" is always a valid pointer here so we can just remove the check. Signed-off-by: Dan Carpenter Signed-off-by: Dan Williams --- drivers/dma/intel_mid_dma.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c index 338bc4eed1f3..41941d05bfb9 100644 --- a/drivers/dma/intel_mid_dma.c +++ b/drivers/dma/intel_mid_dma.c @@ -1021,11 +1021,6 @@ static irqreturn_t intel_mid_dma_interrupt(int irq, void *data) /*DMA Interrupt*/ pr_debug("MDMA:Got an interrupt on irq %d\n", irq); - if (!mid) { - pr_err("ERR_MDMA:null pointer mid\n"); - return -EINVAL; - } - pr_debug("MDMA: Status %x, Mask %x\n", tfr_status, mid->intr_mask); tfr_status &= mid->intr_mask; if (tfr_status) { -- cgit v1.2.3 From e2c8e425baa01a4c8e6ae1b90194ed3d3cde0c66 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Thu, 11 Nov 2010 20:16:29 +0800 Subject: fsldma: add support to 36-bit physical address Expand the dma_mask of fsldma device to 36-bit, indicating that the DMA engine can deal with 36-bit physical address and does not need the SWIOTLB to create bounce buffer for it when doing dma_map_*(). Signed-off-by: Li Yang Acked-by: Kumar Gala Signed-off-by: Dan Williams --- drivers/dma/fsldma.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index 286c3ac6bdcc..531230b87976 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -1,7 +1,7 @@ /* * Freescale MPC85xx, MPC83xx DMA Engine support * - * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. + * Copyright (C) 2007-2010 Freescale Semiconductor, Inc. All rights reserved. * * Author: * Zhang Wei , Jul 2007 @@ -1322,6 +1322,8 @@ static int __devinit fsldma_of_probe(struct platform_device *op, fdev->common.device_control = fsl_dma_device_control; fdev->common.dev = &op->dev; + dma_set_mask(&(op->dev), DMA_BIT_MASK(36)); + dev_set_drvdata(&op->dev, fdev); /* -- cgit v1.2.3 From 0be035f3485379d812d617ee7eaa255cde97dbfa Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Thu, 2 Dec 2010 17:14:30 +0800 Subject: intel_mid_dma: add support for single item scatter-gather list Current driver's device_prep_slave_sg can't be used by DMAC2 even the sg list contains one item, this patch will enable DMAC2 to use this API. Signed-off-by: Feng Tang Acked-by: Vinod Koul Signed-off-by: Dan Williams --- drivers/dma/intel_mid_dma.c | 28 ++++++++++++++++++++++++---- 1 file changed, 24 insertions(+), 4 deletions(-) diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c index 41941d05bfb9..0c0feb8834d0 100644 --- a/drivers/dma/intel_mid_dma.c +++ b/drivers/dma/intel_mid_dma.c @@ -664,11 +664,20 @@ static struct dma_async_tx_descriptor *intel_mid_dma_prep_memcpy( /*calculate CTL_LO*/ ctl_lo.ctl_lo = 0; ctl_lo.ctlx.int_en = 1; - ctl_lo.ctlx.dst_tr_width = mids->dma_slave.dst_addr_width; - ctl_lo.ctlx.src_tr_width = mids->dma_slave.src_addr_width; ctl_lo.ctlx.dst_msize = mids->dma_slave.src_maxburst; ctl_lo.ctlx.src_msize = mids->dma_slave.dst_maxburst; + /* + * Here we need some translation from "enum dma_slave_buswidth" + * to the format for our dma controller + * standard intel_mid_dmac's format + * 1 Byte 0b000 + * 2 Bytes 0b001 + * 4 Bytes 0b010 + */ + ctl_lo.ctlx.dst_tr_width = mids->dma_slave.dst_addr_width / 2; + ctl_lo.ctlx.src_tr_width = mids->dma_slave.src_addr_width / 2; + if (mids->cfg_mode == LNW_DMA_MEM_TO_MEM) { ctl_lo.ctlx.tt_fc = 0; ctl_lo.ctlx.sinc = 0; @@ -746,8 +755,18 @@ static struct dma_async_tx_descriptor *intel_mid_dma_prep_slave_sg( BUG_ON(!mids); if (!midc->dma->pimr_mask) { - pr_debug("MDMA: SG list is not supported by this controller\n"); - return NULL; + /* We can still handle sg list with only one item */ + if (sg_len == 1) { + txd = intel_mid_dma_prep_memcpy(chan, + mids->dma_slave.dst_addr, + mids->dma_slave.src_addr, + sgl->length, + flags); + return txd; + } else { + pr_warn("MDMA: SG list is not supported by this controller\n"); + return NULL; + } } pr_debug("MDMA: SG Length = %d, direction = %d, Flags = %#lx\n", @@ -758,6 +777,7 @@ static struct dma_async_tx_descriptor *intel_mid_dma_prep_slave_sg( pr_err("MDMA: Prep memcpy failed\n"); return NULL; } + desc = to_intel_mid_dma_desc(txd); desc->dirn = direction; ctl_lo.ctl_lo = desc->ctl_lo; -- cgit v1.2.3 From d49278e3351b34870cbffffc5067348a318e7b06 Mon Sep 17 00:00:00 2001 From: Per Forlin Date: Mon, 20 Dec 2010 18:31:38 +0100 Subject: dmaengine: dma40: Add support to split up large elements The maximum transfer size of the stedma40 is (64k-1) x data-width. If the transfer size of one element exceeds this limit the job is split up and sent as linked transfer. Signed-off-by: Per Forlin Signed-off-by: Dan Williams --- arch/arm/plat-nomadik/include/plat/ste_dma40.h | 8 + drivers/dma/ste_dma40.c | 191 +++++++++++++++---- drivers/dma/ste_dma40_ll.c | 246 +++++++++++++++++-------- drivers/dma/ste_dma40_ll.h | 36 ++-- 4 files changed, 351 insertions(+), 130 deletions(-) diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h index 74b62f10d07f..4d6dd4c39b75 100644 --- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h +++ b/arch/arm/plat-nomadik/include/plat/ste_dma40.h @@ -13,6 +13,14 @@ #include #include +/* + * Maxium size for a single dma descriptor + * Size is limited to 16 bits. + * Size is in the units of addr-widths (1,2,4,8 bytes) + * Larger transfers will be split up to multiple linked desc + */ +#define STEDMA40_MAX_SEG_SIZE 0xFFFF + /* dev types for memcpy */ #define STEDMA40_DEV_DST_MEMORY (-1) #define STEDMA40_DEV_SRC_MEMORY (-1) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index fab68a553205..6e1d46a65d0e 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -1,5 +1,6 @@ /* - * Copyright (C) ST-Ericsson SA 2007-2010 + * Copyright (C) Ericsson AB 2007-2008 + * Copyright (C) ST-Ericsson SA 2008-2010 * Author: Per Forlin for ST-Ericsson * Author: Jonas Aaberg for ST-Ericsson * License terms: GNU General Public License (GPL) version 2 @@ -554,8 +555,66 @@ static struct d40_desc *d40_last_queued(struct d40_chan *d40c) return d; } -/* Support functions for logical channels */ +static int d40_psize_2_burst_size(bool is_log, int psize) +{ + if (is_log) { + if (psize == STEDMA40_PSIZE_LOG_1) + return 1; + } else { + if (psize == STEDMA40_PSIZE_PHY_1) + return 1; + } + + return 2 << psize; +} + +/* + * The dma only supports transmitting packages up to + * STEDMA40_MAX_SEG_SIZE << data_width. Calculate the total number of + * dma elements required to send the entire sg list + */ +static int d40_size_2_dmalen(int size, u32 data_width1, u32 data_width2) +{ + int dmalen; + u32 max_w = max(data_width1, data_width2); + u32 min_w = min(data_width1, data_width2); + u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE << min_w, 1 << max_w); + + if (seg_max > STEDMA40_MAX_SEG_SIZE) + seg_max -= (1 << max_w); + + if (!IS_ALIGNED(size, 1 << max_w)) + return -EINVAL; + + if (size <= seg_max) + dmalen = 1; + else { + dmalen = size / seg_max; + if (dmalen * seg_max < size) + dmalen++; + } + return dmalen; +} + +static int d40_sg_2_dmalen(struct scatterlist *sgl, int sg_len, + u32 data_width1, u32 data_width2) +{ + struct scatterlist *sg; + int i; + int len = 0; + int ret; + + for_each_sg(sgl, sg, sg_len, i) { + ret = d40_size_2_dmalen(sg_dma_len(sg), + data_width1, data_width2); + if (ret < 0) + return ret; + len += ret; + } + return len; +} +/* Support functions for logical channels */ static int d40_channel_execute_command(struct d40_chan *d40c, enum d40_command command) @@ -1241,6 +1300,21 @@ static int d40_validate_conf(struct d40_chan *d40c, res = -EINVAL; } + if (d40_psize_2_burst_size(is_log, conf->src_info.psize) * + (1 << conf->src_info.data_width) != + d40_psize_2_burst_size(is_log, conf->dst_info.psize) * + (1 << conf->dst_info.data_width)) { + /* + * The DMAC hardware only supports + * src (burst x width) == dst (burst x width) + */ + + dev_err(&d40c->chan.dev->device, + "[%s] src (burst x width) != dst (burst x width)\n", + __func__); + res = -EINVAL; + } + return res; } @@ -1638,13 +1712,21 @@ struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan, if (d40d == NULL) goto err; - d40d->lli_len = sgl_len; + d40d->lli_len = d40_sg_2_dmalen(sgl_dst, sgl_len, + d40c->dma_cfg.src_info.data_width, + d40c->dma_cfg.dst_info.data_width); + if (d40d->lli_len < 0) { + dev_err(&d40c->chan.dev->device, + "[%s] Unaligned size\n", __func__); + goto err; + } + d40d->lli_current = 0; d40d->txd.flags = dma_flags; if (d40c->log_num != D40_PHY_CHAN) { - if (d40_pool_lli_alloc(d40d, sgl_len, true) < 0) { + if (d40_pool_lli_alloc(d40d, d40d->lli_len, true) < 0) { dev_err(&d40c->chan.dev->device, "[%s] Out of memory\n", __func__); goto err; @@ -1654,15 +1736,17 @@ struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan, sgl_len, d40d->lli_log.src, d40c->log_def.lcsp1, - d40c->dma_cfg.src_info.data_width); + d40c->dma_cfg.src_info.data_width, + d40c->dma_cfg.dst_info.data_width); (void) d40_log_sg_to_lli(sgl_dst, sgl_len, d40d->lli_log.dst, d40c->log_def.lcsp3, - d40c->dma_cfg.dst_info.data_width); + d40c->dma_cfg.dst_info.data_width, + d40c->dma_cfg.src_info.data_width); } else { - if (d40_pool_lli_alloc(d40d, sgl_len, false) < 0) { + if (d40_pool_lli_alloc(d40d, d40d->lli_len, false) < 0) { dev_err(&d40c->chan.dev->device, "[%s] Out of memory\n", __func__); goto err; @@ -1675,6 +1759,7 @@ struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan, virt_to_phys(d40d->lli_phy.src), d40c->src_def_cfg, d40c->dma_cfg.src_info.data_width, + d40c->dma_cfg.dst_info.data_width, d40c->dma_cfg.src_info.psize); if (res < 0) @@ -1687,6 +1772,7 @@ struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan, virt_to_phys(d40d->lli_phy.dst), d40c->dst_def_cfg, d40c->dma_cfg.dst_info.data_width, + d40c->dma_cfg.src_info.data_width, d40c->dma_cfg.dst_info.psize); if (res < 0) @@ -1826,7 +1912,6 @@ static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan, struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); unsigned long flags; - int err = 0; if (d40c->phy_chan == NULL) { dev_err(&d40c->chan.dev->device, @@ -1844,6 +1929,15 @@ static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan, } d40d->txd.flags = dma_flags; + d40d->lli_len = d40_size_2_dmalen(size, + d40c->dma_cfg.src_info.data_width, + d40c->dma_cfg.dst_info.data_width); + if (d40d->lli_len < 0) { + dev_err(&d40c->chan.dev->device, + "[%s] Unaligned size\n", __func__); + goto err; + } + dma_async_tx_descriptor_init(&d40d->txd, chan); @@ -1851,37 +1945,40 @@ static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan, if (d40c->log_num != D40_PHY_CHAN) { - if (d40_pool_lli_alloc(d40d, 1, true) < 0) { + if (d40_pool_lli_alloc(d40d, d40d->lli_len, true) < 0) { dev_err(&d40c->chan.dev->device, "[%s] Out of memory\n", __func__); goto err; } - d40d->lli_len = 1; d40d->lli_current = 0; - d40_log_fill_lli(d40d->lli_log.src, - src, - size, - d40c->log_def.lcsp1, - d40c->dma_cfg.src_info.data_width, - true); + if (d40_log_buf_to_lli(d40d->lli_log.src, + src, + size, + d40c->log_def.lcsp1, + d40c->dma_cfg.src_info.data_width, + d40c->dma_cfg.dst_info.data_width, + true) == NULL) + goto err; - d40_log_fill_lli(d40d->lli_log.dst, - dst, - size, - d40c->log_def.lcsp3, - d40c->dma_cfg.dst_info.data_width, - true); + if (d40_log_buf_to_lli(d40d->lli_log.dst, + dst, + size, + d40c->log_def.lcsp3, + d40c->dma_cfg.dst_info.data_width, + d40c->dma_cfg.src_info.data_width, + true) == NULL) + goto err; } else { - if (d40_pool_lli_alloc(d40d, 1, false) < 0) { + if (d40_pool_lli_alloc(d40d, d40d->lli_len, false) < 0) { dev_err(&d40c->chan.dev->device, "[%s] Out of memory\n", __func__); goto err; } - err = d40_phy_fill_lli(d40d->lli_phy.src, + if (d40_phy_buf_to_lli(d40d->lli_phy.src, src, size, d40c->dma_cfg.src_info.psize, @@ -1889,11 +1986,11 @@ static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan, d40c->src_def_cfg, true, d40c->dma_cfg.src_info.data_width, - false); - if (err) - goto err_fill_lli; + d40c->dma_cfg.dst_info.data_width, + false) == NULL) + goto err; - err = d40_phy_fill_lli(d40d->lli_phy.dst, + if (d40_phy_buf_to_lli(d40d->lli_phy.dst, dst, size, d40c->dma_cfg.dst_info.psize, @@ -1901,10 +1998,9 @@ static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan, d40c->dst_def_cfg, true, d40c->dma_cfg.dst_info.data_width, - false); - - if (err) - goto err_fill_lli; + d40c->dma_cfg.src_info.data_width, + false) == NULL) + goto err; (void) dma_map_single(d40c->base->dev, d40d->lli_phy.src, d40d->lli_pool.size, DMA_TO_DEVICE); @@ -1913,9 +2009,6 @@ static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan, spin_unlock_irqrestore(&d40c->lock, flags); return &d40d->txd; -err_fill_lli: - dev_err(&d40c->chan.dev->device, - "[%s] Failed filling in PHY LLI\n", __func__); err: if (d40d) d40_desc_free(d40c, d40d); @@ -1945,13 +2038,21 @@ static int d40_prep_slave_sg_log(struct d40_desc *d40d, dma_addr_t dev_addr = 0; int total_size; - if (d40_pool_lli_alloc(d40d, sg_len, true) < 0) { + d40d->lli_len = d40_sg_2_dmalen(sgl, sg_len, + d40c->dma_cfg.src_info.data_width, + d40c->dma_cfg.dst_info.data_width); + if (d40d->lli_len < 0) { + dev_err(&d40c->chan.dev->device, + "[%s] Unaligned size\n", __func__); + return -EINVAL; + } + + if (d40_pool_lli_alloc(d40d, d40d->lli_len, true) < 0) { dev_err(&d40c->chan.dev->device, "[%s] Out of memory\n", __func__); return -ENOMEM; } - d40d->lli_len = sg_len; d40d->lli_current = 0; if (direction == DMA_FROM_DEVICE) @@ -1993,13 +2094,21 @@ static int d40_prep_slave_sg_phy(struct d40_desc *d40d, dma_addr_t dst_dev_addr; int res; - if (d40_pool_lli_alloc(d40d, sgl_len, false) < 0) { + d40d->lli_len = d40_sg_2_dmalen(sgl, sgl_len, + d40c->dma_cfg.src_info.data_width, + d40c->dma_cfg.dst_info.data_width); + if (d40d->lli_len < 0) { + dev_err(&d40c->chan.dev->device, + "[%s] Unaligned size\n", __func__); + return -EINVAL; + } + + if (d40_pool_lli_alloc(d40d, d40d->lli_len, false) < 0) { dev_err(&d40c->chan.dev->device, "[%s] Out of memory\n", __func__); return -ENOMEM; } - d40d->lli_len = sgl_len; d40d->lli_current = 0; if (direction == DMA_FROM_DEVICE) { @@ -2024,6 +2133,7 @@ static int d40_prep_slave_sg_phy(struct d40_desc *d40d, virt_to_phys(d40d->lli_phy.src), d40c->src_def_cfg, d40c->dma_cfg.src_info.data_width, + d40c->dma_cfg.dst_info.data_width, d40c->dma_cfg.src_info.psize); if (res < 0) return res; @@ -2035,6 +2145,7 @@ static int d40_prep_slave_sg_phy(struct d40_desc *d40d, virt_to_phys(d40d->lli_phy.dst), d40c->dst_def_cfg, d40c->dma_cfg.dst_info.data_width, + d40c->dma_cfg.src_info.data_width, d40c->dma_cfg.dst_info.psize); if (res < 0) return res; @@ -2244,6 +2355,8 @@ static void d40_set_runtime_config(struct dma_chan *chan, psize = STEDMA40_PSIZE_PHY_8; else if (config_maxburst >= 4) psize = STEDMA40_PSIZE_PHY_4; + else if (config_maxburst >= 2) + psize = STEDMA40_PSIZE_PHY_2; else psize = STEDMA40_PSIZE_PHY_1; } diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c index 8557cb88b255..0b096a38322d 100644 --- a/drivers/dma/ste_dma40_ll.c +++ b/drivers/dma/ste_dma40_ll.c @@ -1,6 +1,6 @@ /* * Copyright (C) ST-Ericsson SA 2007-2010 - * Author: Per Friden for ST-Ericsson + * Author: Per Forlin for ST-Ericsson * Author: Jonas Aaberg for ST-Ericsson * License terms: GNU General Public License (GPL) version 2 */ @@ -122,15 +122,15 @@ void d40_phy_cfg(struct stedma40_chan_cfg *cfg, *dst_cfg = dst; } -int d40_phy_fill_lli(struct d40_phy_lli *lli, - dma_addr_t data, - u32 data_size, - int psize, - dma_addr_t next_lli, - u32 reg_cfg, - bool term_int, - u32 data_width, - bool is_device) +static int d40_phy_fill_lli(struct d40_phy_lli *lli, + dma_addr_t data, + u32 data_size, + int psize, + dma_addr_t next_lli, + u32 reg_cfg, + bool term_int, + u32 data_width, + bool is_device) { int num_elems; @@ -139,13 +139,6 @@ int d40_phy_fill_lli(struct d40_phy_lli *lli, else num_elems = 2 << psize; - /* - * Size is 16bit. data_width is 8, 16, 32 or 64 bit - * Block large than 64 KiB must be split. - */ - if (data_size > (0xffff << data_width)) - return -EINVAL; - /* Must be aligned */ if (!IS_ALIGNED(data, 0x1 << data_width)) return -EINVAL; @@ -187,55 +180,118 @@ int d40_phy_fill_lli(struct d40_phy_lli *lli, return 0; } +static int d40_seg_size(int size, int data_width1, int data_width2) +{ + u32 max_w = max(data_width1, data_width2); + u32 min_w = min(data_width1, data_width2); + u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE << min_w, 1 << max_w); + + if (seg_max > STEDMA40_MAX_SEG_SIZE) + seg_max -= (1 << max_w); + + if (size <= seg_max) + return size; + + if (size <= 2 * seg_max) + return ALIGN(size / 2, 1 << max_w); + + return seg_max; +} + +struct d40_phy_lli *d40_phy_buf_to_lli(struct d40_phy_lli *lli, + dma_addr_t addr, + u32 size, + int psize, + dma_addr_t lli_phys, + u32 reg_cfg, + bool term_int, + u32 data_width1, + u32 data_width2, + bool is_device) +{ + int err; + dma_addr_t next = lli_phys; + int size_rest = size; + int size_seg = 0; + + do { + size_seg = d40_seg_size(size_rest, data_width1, data_width2); + size_rest -= size_seg; + + if (term_int && size_rest == 0) + next = 0; + else + next = ALIGN(next + sizeof(struct d40_phy_lli), + D40_LLI_ALIGN); + + err = d40_phy_fill_lli(lli, + addr, + size_seg, + psize, + next, + reg_cfg, + !next, + data_width1, + is_device); + + if (err) + goto err; + + lli++; + if (!is_device) + addr += size_seg; + } while (size_rest); + + return lli; + + err: + return NULL; +} + int d40_phy_sg_to_lli(struct scatterlist *sg, int sg_len, dma_addr_t target, - struct d40_phy_lli *lli, + struct d40_phy_lli *lli_sg, dma_addr_t lli_phys, u32 reg_cfg, - u32 data_width, + u32 data_width1, + u32 data_width2, int psize) { int total_size = 0; int i; struct scatterlist *current_sg = sg; - dma_addr_t next_lli_phys; dma_addr_t dst; - int err = 0; + struct d40_phy_lli *lli = lli_sg; + dma_addr_t l_phys = lli_phys; for_each_sg(sg, current_sg, sg_len, i) { total_size += sg_dma_len(current_sg); - /* If this scatter list entry is the last one, no next link */ - if (sg_len - 1 == i) - next_lli_phys = 0; - else - next_lli_phys = ALIGN(lli_phys + (i + 1) * - sizeof(struct d40_phy_lli), - D40_LLI_ALIGN); - if (target) dst = target; else dst = sg_phys(current_sg); - err = d40_phy_fill_lli(&lli[i], - dst, - sg_dma_len(current_sg), - psize, - next_lli_phys, - reg_cfg, - !next_lli_phys, - data_width, - target == dst); - if (err) - goto err; + l_phys = ALIGN(lli_phys + (lli - lli_sg) * + sizeof(struct d40_phy_lli), D40_LLI_ALIGN); + + lli = d40_phy_buf_to_lli(lli, + dst, + sg_dma_len(current_sg), + psize, + l_phys, + reg_cfg, + sg_len - 1 == i, + data_width1, + data_width2, + target == dst); + if (lli == NULL) + return -EINVAL; } return total_size; -err: - return err; } @@ -315,17 +371,20 @@ void d40_log_lli_lcla_write(struct d40_log_lli *lcla, writel(lli_dst->lcsp13, &lcla[1].lcsp13); } -void d40_log_fill_lli(struct d40_log_lli *lli, - dma_addr_t data, u32 data_size, - u32 reg_cfg, - u32 data_width, - bool addr_inc) +static void d40_log_fill_lli(struct d40_log_lli *lli, + dma_addr_t data, u32 data_size, + u32 reg_cfg, + u32 data_width, + bool addr_inc) { lli->lcsp13 = reg_cfg; /* The number of elements to transfer */ lli->lcsp02 = ((data_size >> data_width) << D40_MEM_LCSP0_ECNT_POS) & D40_MEM_LCSP0_ECNT_MASK; + + BUG_ON((data_size >> data_width) > STEDMA40_MAX_SEG_SIZE); + /* 16 LSBs address of the current element */ lli->lcsp02 |= data & D40_MEM_LCSP0_SPTR_MASK; /* 16 MSBs address of the current element */ @@ -348,55 +407,94 @@ int d40_log_sg_to_dev(struct scatterlist *sg, int total_size = 0; struct scatterlist *current_sg = sg; int i; + struct d40_log_lli *lli_src = lli->src; + struct d40_log_lli *lli_dst = lli->dst; for_each_sg(sg, current_sg, sg_len, i) { total_size += sg_dma_len(current_sg); if (direction == DMA_TO_DEVICE) { - d40_log_fill_lli(&lli->src[i], - sg_phys(current_sg), - sg_dma_len(current_sg), - lcsp->lcsp1, src_data_width, - true); - d40_log_fill_lli(&lli->dst[i], - dev_addr, - sg_dma_len(current_sg), - lcsp->lcsp3, dst_data_width, - false); + lli_src = + d40_log_buf_to_lli(lli_src, + sg_phys(current_sg), + sg_dma_len(current_sg), + lcsp->lcsp1, src_data_width, + dst_data_width, + true); + lli_dst = + d40_log_buf_to_lli(lli_dst, + dev_addr, + sg_dma_len(current_sg), + lcsp->lcsp3, dst_data_width, + src_data_width, + false); } else { - d40_log_fill_lli(&lli->dst[i], - sg_phys(current_sg), - sg_dma_len(current_sg), - lcsp->lcsp3, dst_data_width, - true); - d40_log_fill_lli(&lli->src[i], - dev_addr, - sg_dma_len(current_sg), - lcsp->lcsp1, src_data_width, - false); + lli_dst = + d40_log_buf_to_lli(lli_dst, + sg_phys(current_sg), + sg_dma_len(current_sg), + lcsp->lcsp3, dst_data_width, + src_data_width, + true); + lli_src = + d40_log_buf_to_lli(lli_src, + dev_addr, + sg_dma_len(current_sg), + lcsp->lcsp1, src_data_width, + dst_data_width, + false); } } return total_size; } +struct d40_log_lli *d40_log_buf_to_lli(struct d40_log_lli *lli_sg, + dma_addr_t addr, + int size, + u32 lcsp13, /* src or dst*/ + u32 data_width1, + u32 data_width2, + bool addr_inc) +{ + struct d40_log_lli *lli = lli_sg; + int size_rest = size; + int size_seg = 0; + + do { + size_seg = d40_seg_size(size_rest, data_width1, data_width2); + size_rest -= size_seg; + + d40_log_fill_lli(lli, + addr, + size_seg, + lcsp13, data_width1, + addr_inc); + if (addr_inc) + addr += size_seg; + lli++; + } while (size_rest); + + return lli; +} + int d40_log_sg_to_lli(struct scatterlist *sg, int sg_len, struct d40_log_lli *lli_sg, u32 lcsp13, /* src or dst*/ - u32 data_width) + u32 data_width1, u32 data_width2) { int total_size = 0; struct scatterlist *current_sg = sg; int i; + struct d40_log_lli *lli = lli_sg; for_each_sg(sg, current_sg, sg_len, i) { total_size += sg_dma_len(current_sg); - - d40_log_fill_lli(&lli_sg[i], - sg_phys(current_sg), - sg_dma_len(current_sg), - lcsp13, data_width, - true); + lli = d40_log_buf_to_lli(lli, + sg_phys(current_sg), + sg_dma_len(current_sg), + lcsp13, + data_width1, data_width2, true); } return total_size; } diff --git a/drivers/dma/ste_dma40_ll.h b/drivers/dma/ste_dma40_ll.h index 9e419b907544..9cc43495bea2 100644 --- a/drivers/dma/ste_dma40_ll.h +++ b/drivers/dma/ste_dma40_ll.h @@ -292,18 +292,20 @@ int d40_phy_sg_to_lli(struct scatterlist *sg, struct d40_phy_lli *lli, dma_addr_t lli_phys, u32 reg_cfg, - u32 data_width, + u32 data_width1, + u32 data_width2, int psize); -int d40_phy_fill_lli(struct d40_phy_lli *lli, - dma_addr_t data, - u32 data_size, - int psize, - dma_addr_t next_lli, - u32 reg_cfg, - bool term_int, - u32 data_width, - bool is_device); +struct d40_phy_lli *d40_phy_buf_to_lli(struct d40_phy_lli *lli, + dma_addr_t data, + u32 data_size, + int psize, + dma_addr_t next_lli, + u32 reg_cfg, + bool term_int, + u32 data_width1, + u32 data_width2, + bool is_device); void d40_phy_lli_write(void __iomem *virtbase, u32 phy_chan_num, @@ -312,12 +314,12 @@ void d40_phy_lli_write(void __iomem *virtbase, /* Logical channels */ -void d40_log_fill_lli(struct d40_log_lli *lli, - dma_addr_t data, - u32 data_size, - u32 reg_cfg, - u32 data_width, - bool addr_inc); +struct d40_log_lli *d40_log_buf_to_lli(struct d40_log_lli *lli_sg, + dma_addr_t addr, + int size, + u32 lcsp13, /* src or dst*/ + u32 data_width1, u32 data_width2, + bool addr_inc); int d40_log_sg_to_dev(struct scatterlist *sg, int sg_len, @@ -332,7 +334,7 @@ int d40_log_sg_to_lli(struct scatterlist *sg, int sg_len, struct d40_log_lli *lli_sg, u32 lcsp13, /* src or dst*/ - u32 data_width); + u32 data_width1, u32 data_width2); void d40_log_lli_lcpa_write(struct d40_log_lli_full *lcpa, struct d40_log_lli *lli_dst, -- cgit v1.2.3 From e8b5e11df3d02e7bbd85c025cc705a8e67746f73 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:30:24 +0000 Subject: ARM: PL08x: fix spelling errors Correct mis-spellings in comments and printk strings. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 37 +++++++++++++++++-------------------- 1 file changed, 17 insertions(+), 20 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index b605cc9ac3a2..3da49ed5f800 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -19,7 +19,7 @@ * this program; if not, write to the Free Software Foundation, Inc., 59 * Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * The full GNU General Public License is iin this distribution in the + * The full GNU General Public License is in this distribution in the * file called COPYING. * * Documentation: ARM DDI 0196G == PL080 @@ -82,7 +82,7 @@ /** * struct vendor_data - vendor-specific config parameters - * for PL08x derivates + * for PL08x derivatives * @name: the name of this specific variant * @channels: the number of channels available in this variant * @dualmaster: whether this version supports dual AHB masters @@ -96,10 +96,8 @@ struct vendor_data { /* * PL08X private data structures - * An LLI struct - see pl08x TRM - * Note that next uses bit[0] as a bus bit, - * start & end do not - their bus bit info - * is in cctl + * An LLI struct - see PL08x TRM. Note that next uses bit[0] as a bus bit, + * start & end do not - their bus bit info is in cctl. */ struct lli { dma_addr_t src; @@ -152,7 +150,7 @@ struct pl08x_driver_data { /* Size (bytes) of each LLI buffer allocated for one transfer */ # define PL08X_LLI_TSFR_SIZE 0x2000 -/* Maximimum times we call dma_pool_alloc on this pool without freeing */ +/* Maximum times we call dma_pool_alloc on this pool without freeing */ #define PL08X_MAX_ALLOCS 0x40 #define MAX_NUM_TSFR_LLIS (PL08X_LLI_TSFR_SIZE/sizeof(struct lli)) #define PL08X_ALIGN 8 @@ -177,7 +175,7 @@ static int pl08x_phy_channel_busy(struct pl08x_phy_chan *ch) /* * Set the initial DMA register values i.e. those for the first LLI - * The next lli pointer and the configuration interrupt bit have + * The next LLI pointer and the configuration interrupt bit have * been set when the LLIs were constructed */ static void pl08x_set_cregs(struct pl08x_driver_data *pl08x, @@ -366,8 +364,7 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) while (clli) { bytes += get_bytes_in_cctl(llis_va[i].cctl); /* - * A clli of 0x00000000 will terminate the - * LLI list + * A LLI pointer of 0 terminates the LLI list */ clli = llis_va[i].next; i++; @@ -469,7 +466,7 @@ static inline u32 pl08x_cctl_bits(u32 cctl, u8 srcwidth, u8 dstwidth, { u32 retbits = cctl; - /* Remove all src, dst and transfersize bits */ + /* Remove all src, dst and transfer size bits */ retbits &= ~PL080_CONTROL_DWIDTH_MASK; retbits &= ~PL080_CONTROL_SWIDTH_MASK; retbits &= ~PL080_CONTROL_TRANSFER_SIZE_MASK; @@ -701,7 +698,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, * Choose bus to align to * - prefers destination bus if both available * - if fixed address on one bus chooses other - * - modifies cctl to choose an apropriate master + * - modifies cctl to choose an appropriate master */ pl08x_choose_master_bus(&txd->srcbus, &txd->dstbus, &mbus, &sbus, cctl); @@ -775,7 +772,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, target_len = max_bytes_per_lli; /* - * Set bus lengths for incrementing busses + * Set bus lengths for incrementing buses * to number of bytes which fill to next memory * boundary */ @@ -826,7 +823,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, /* * So now we know how many bytes to transfer * to get to the nearest boundary - * The next lli will past the boundary + * The next LLI will past the boundary * - however we may be working to a boundary * on the slave bus * We need to ensure the master stays aligned @@ -884,7 +881,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, && (remainder); j++) { cctl = pl08x_cctl_bits(cctl, 1, 1, 1); dev_vdbg(&pl08x->adev->dev, - "%s align with boundardy, single byte (remain %08x)\n", + "%s align with boundary, single byte (remain %08x)\n", __func__, remainder); num_llis = pl08x_fill_lli_for_desc(pl08x, @@ -907,7 +904,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, while (remainder) { cctl = pl08x_cctl_bits(cctl, 1, 1, 1); dev_vdbg(&pl08x->adev->dev, - "%s align with boundardy, single odd byte (remain %d)\n", + "%s align with boundary, single odd byte (remain %d)\n", __func__, remainder); num_llis = pl08x_fill_lli_for_desc(pl08x, txd, num_llis, 1, cctl, &remainder); @@ -1367,8 +1364,8 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, * available to handle it whereas slave transfers may * have been denied due to platform channel muxing restrictions * and since there is no guarantee that this will ever be - * resolved, and since the signal must be aquired AFTER - * aquiring the physical channel, we will let them be NACK:ed + * resolved, and since the signal must be acquired AFTER + * acquiring the physical channel, we will let them be NACK:ed * with -EBUSY here. The drivers can alway retry the prep() * call if they are eager on doing this using DMA. */ @@ -1620,7 +1617,7 @@ static void pl08x_ensure_on(struct pl08x_driver_data *pl08x) val = readl(pl08x->base + PL080_CONFIG); val &= ~(PL080_CONFIG_M2_BE | PL080_CONFIG_M1_BE | PL080_CONFIG_ENABLE); - /* We implictly clear bit 1 and that means little-endian mode */ + /* We implicitly clear bit 1 and that means little-endian mode */ val |= PL080_CONFIG_ENABLE; writel(val, pl08x->base + PL080_CONFIG); } @@ -2160,7 +2157,7 @@ static int __init pl08x_init(void) retval = amba_driver_register(&pl08x_amba_driver); if (retval) printk(KERN_WARNING DRIVER_NAME - "failed to register as an amba device (%d)\n", + "failed to register as an AMBA device (%d)\n", retval); return retval; } -- cgit v1.2.3 From 4440aacf3a171a0ab498feda58d100a320c5d9ff Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:30:44 +0000 Subject: ARM: PL08x: fix array overflow in dma_set_runtime_config() If maxburst was passed in as zero, we would overflow the burst_sizes[] array. Fix this by checking for this condition, and defaulting to single transfer 'bursts'. Improve the readability of the loop using a for() loop rather than a while() loop with the iterator initialized far from the loop. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 3da49ed5f800..0809810f9e7a 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1207,7 +1207,7 @@ static void dma_set_runtime_config(struct dma_chan *chan, u32 cctl = 0; /* Mask out all except src and dst channel */ u32 ccfg = cd->ccfg & 0x000003DEU; - int i = 0; + int i; /* Transfer direction */ plchan->runtime_direction = config->direction; @@ -1250,18 +1250,17 @@ static void dma_set_runtime_config(struct dma_chan *chan, /* * Now decide on a maxburst: - * If this channel will only request single transfers, set - * this down to ONE element. + * If this channel will only request single transfers, set this + * down to ONE element. Also select one element if no maxburst + * is specified. */ - if (plchan->cd->single) { + if (plchan->cd->single || maxburst == 0) { cctl |= (PL080_BSIZE_1 << PL080_CONTROL_SB_SIZE_SHIFT) | (PL080_BSIZE_1 << PL080_CONTROL_DB_SIZE_SHIFT); } else { - while (i < ARRAY_SIZE(burst_sizes)) { + for (i = 0; i < ARRAY_SIZE(burst_sizes); i++) if (burst_sizes[i].burstwords <= maxburst) break; - i++; - } cctl |= burst_sizes[i].reg; } -- cgit v1.2.3 From 91aa5fadb831e7b6ea473a526a6b49c6dc4819ce Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:31:04 +0000 Subject: ARM: PL08x: fix atomic_t usage and tx_submit() return value range The last_issued variable uses an atomic type, which is only incremented inside a protected region, and then read. Everywhere else only reads the value, so it isn't using atomic_t correctly, and it doesn't even need to. Moreover, the DMA engine code provides us with a variable for this already - chan.cookie. Use chan.cookie instead. Also, avoid negative dma_cookie_t values - negative returns from tx_submit() mean failure, yet in reality we always succeed. Restart from cookie 1, just like other DMA engine drivers do. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 18 +++++++++--------- include/linux/amba/pl08x.h | 1 - 2 files changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 0809810f9e7a..5d9a15652dba 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -74,7 +74,6 @@ #include #include #include -#include #include #include @@ -1082,8 +1081,10 @@ static dma_cookie_t pl08x_tx_submit(struct dma_async_tx_descriptor *tx) { struct pl08x_dma_chan *plchan = to_pl08x_chan(tx->chan); - atomic_inc(&plchan->last_issued); - tx->cookie = atomic_read(&plchan->last_issued); + plchan->chan.cookie += 1; + if (plchan->chan.cookie < 0) + plchan->chan.cookie = 1; + tx->cookie = plchan->chan.cookie; /* This unlock follows the lock in the prep() function */ spin_unlock_irqrestore(&plchan->lock, plchan->lockflags); @@ -1115,7 +1116,7 @@ pl08x_dma_tx_status(struct dma_chan *chan, enum dma_status ret; u32 bytesleft = 0; - last_used = atomic_read(&plchan->last_issued); + last_used = plchan->chan.cookie; last_complete = plchan->lc; ret = dma_async_is_complete(cookie, last_complete, last_used); @@ -1131,7 +1132,7 @@ pl08x_dma_tx_status(struct dma_chan *chan, /* * This cookie not complete yet */ - last_used = atomic_read(&plchan->last_issued); + last_used = plchan->chan.cookie; last_complete = plchan->lc; /* Get number of bytes left in the active transactions and queue */ @@ -1641,8 +1642,7 @@ static void pl08x_tasklet(unsigned long data) /* * Update last completed */ - plchan->lc = - (plchan->at->tx.cookie); + plchan->lc = plchan->at->tx.cookie; /* * Callback to signal completion @@ -1820,8 +1820,8 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, chan->name); chan->chan.device = dmadev; - atomic_set(&chan->last_issued, 0); - chan->lc = atomic_read(&chan->last_issued); + chan->chan.cookie = 0; + chan->lc = 0; spin_lock_init(&chan->lock); INIT_LIST_HEAD(&chan->desc_list); diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 521a0f8974ac..4ae62b4684f9 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -174,7 +174,6 @@ struct pl08x_dma_chan { struct pl08x_channel_data *cd; dma_addr_t runtime_addr; enum dma_data_direction runtime_direction; - atomic_t last_issued; dma_cookie_t lc; struct list_head desc_list; struct pl08x_txd *at; -- cgit v1.2.3 From bf072af461c166964fb110cfcafccd752fbb4c64 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:31:24 +0000 Subject: ARM: PL08x: fix locking in tasklet Tasklets are run from an interruptible context. The slave DMA functions can be called from within IRQ handlers. Taking the spinlock without disabling interrupts allows an interrupt handler to run, which may try to take the spinlock again, resulting in deadlock. Fix this by using the irqsave spinlocks. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 5d9a15652dba..69cfb05e4d3c 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1627,11 +1627,12 @@ static void pl08x_tasklet(unsigned long data) struct pl08x_dma_chan *plchan = (struct pl08x_dma_chan *) data; struct pl08x_phy_chan *phychan = plchan->phychan; struct pl08x_driver_data *pl08x = plchan->host; + unsigned long flags; if (!plchan) BUG(); - spin_lock(&plchan->lock); + spin_lock_irqsave(&plchan->lock, flags); if (plchan->at) { dma_async_tx_callback callback = @@ -1728,7 +1729,7 @@ static void pl08x_tasklet(unsigned long data) } } - spin_unlock(&plchan->lock); + spin_unlock_irqrestore(&plchan->lock, flags); } static irqreturn_t pl08x_irq(int irq, void *dev) -- cgit v1.2.3 From dafa73171be8dd31b485f5839e3376b1ca908e24 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:31:45 +0000 Subject: ARM: PL08x: fix a leak when preparing TXDs If we fail to allocate the LLI, the prep_* function will return NULL. However, the TXD we allocated will not be placed on any list, nor will it be freed - we'll just drop all references to it. Make sure we free it rather than leaking TXDs. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 69cfb05e4d3c..b3b3180ce561 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1332,9 +1332,10 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, int ret; num_llis = pl08x_fill_llis_for_desc(pl08x, txd); - - if (!num_llis) + if (!num_llis) { + kfree(txd); return -EINVAL; + } spin_lock_irqsave(&plchan->lock, plchan->lockflags); -- cgit v1.2.3 From 9c0bb43bbd02fba0b235f8993d1f175734fa8735 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:32:05 +0000 Subject: ARM: PL08x: fix missed spin-unlock in pl08x_issue_pending() pl08x_issue_pending() returns with the spinlock locked and interrupts disabled if the channel is waiting for a physical DMA to become free. This is wrong - especially as pl08x_issue_pending() is an API function as it leads to deadlocks. Fix it to always return with the spinlock unlocked. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index b3b3180ce561..9a8d44504c6a 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1294,15 +1294,11 @@ static void pl08x_issue_pending(struct dma_chan *chan) unsigned long flags; spin_lock_irqsave(&plchan->lock, flags); - /* Something is already active */ - if (plchan->at) { - spin_unlock_irqrestore(&plchan->lock, flags); - return; - } - - /* Didn't get a physical channel so waiting for it ... */ - if (plchan->state == PL08X_CHAN_WAITING) + /* Something is already active, or we're waiting for a channel... */ + if (plchan->at || plchan->state == PL08X_CHAN_WAITING) { + spin_unlock_irqrestore(&plchan->lock, flags); return; + } /* Take the first element in the queue and execute it */ if (!list_empty(&plchan->desc_list)) { -- cgit v1.2.3 From 98838f90d92f6f0abf6d6a99880c0ff3127633b8 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:32:26 +0000 Subject: ARM: PL08x: fix deadlock in terminate_all Trying to disable a tasklet while holding a spinlock which the tasklet will take is a recipe for deadlock - tasklet_disable() will wait for the tasklet to finish running, which it will never do. In any case, there is not a corresponding tasklet_enable(), so once the tasklet is disabled, it will never run again until reboot. It's safe to just remove the tasklet_disable() as we remove all current and pending descriptors before releasing this spinlock. This means that the tasklet will find no remaining work if it subsequently runs. The only remaining issue is that the callback for an already submitted txd may be in progress, or even called after terminate_all() returns. There's not much that can be done about that as waiting for the callback to complete before returning will also lead to deadlocks. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 9a8d44504c6a..4ca1eb122e07 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1560,8 +1560,6 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, pl08x_put_phy_channel(pl08x, plchan->phychan); plchan->phychan = NULL; } - /* Stop any pending tasklet */ - tasklet_disable(&plchan->tasklet); /* Dequeue jobs and free LLIs */ if (plchan->at) { pl08x_free_txd(pl08x, plchan->at); -- cgit v1.2.3 From 3e2a037c1de79af999a54581cbf1e8a5c933fd95 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:32:46 +0000 Subject: ARM: PL08x: fix sparse warnings drivers/dma/amba-pl08x.c:1895:40: warning: Unknown escape '%' drivers/dma/amba-pl08x.c:1903:40: warning: Unknown escape '%' drivers/dma/amba-pl08x.c:513:6: warning: symbol 'pl08x_choose_master_bus' was not declared. Should it be static? drivers/dma/amba-pl08x.c:604:5: warning: symbol 'pl08x_fill_llis_for_desc' was not declared. Should it be static? drivers/dma/amba-pl08x.c:1442:32: warning: symbol 'pl08x_prep_slave_sg' was not declared. Should it be static? Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 4ca1eb122e07..74fa5a0f1490 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -510,7 +510,7 @@ static inline u32 pl08x_cctl_bits(u32 cctl, u8 srcwidth, u8 dstwidth, * this prefers the destination bus if both available * if fixed address on one bus the other will be chosen */ -void pl08x_choose_master_bus(struct pl08x_bus_data *src_bus, +static void pl08x_choose_master_bus(struct pl08x_bus_data *src_bus, struct pl08x_bus_data *dst_bus, struct pl08x_bus_data **mbus, struct pl08x_bus_data **sbus, u32 cctl) { @@ -545,7 +545,7 @@ void pl08x_choose_master_bus(struct pl08x_bus_data *src_bus, * Fills in one LLI for a certain transfer descriptor * and advance the counter */ -int pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, +static int pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, struct pl08x_txd *txd, int num_llis, int len, u32 cctl, u32 *remainder) { @@ -1439,7 +1439,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( return &txd->tx; } -struct dma_async_tx_descriptor *pl08x_prep_slave_sg( +static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_data_direction direction, unsigned long flags) @@ -1890,7 +1890,7 @@ static int pl08x_debugfs_show(struct seq_file *s, void *data) seq_printf(s, "CHANNEL:\tSTATE:\n"); seq_printf(s, "--------\t------\n"); list_for_each_entry(chan, &pl08x->memcpy.channels, chan.device_node) { - seq_printf(s, "%s\t\t\%s\n", chan->name, + seq_printf(s, "%s\t\t%s\n", chan->name, pl08x_state_str(chan->state)); } @@ -1898,7 +1898,7 @@ static int pl08x_debugfs_show(struct seq_file *s, void *data) seq_printf(s, "CHANNEL:\tSTATE:\n"); seq_printf(s, "--------\t------\n"); list_for_each_entry(chan, &pl08x->slave.channels, chan.device_node) { - seq_printf(s, "%s\t\t\%s\n", chan->name, + seq_printf(s, "%s\t\t%s\n", chan->name, pl08x_state_str(chan->state)); } -- cgit v1.2.3 From 9dc2c200a0551754f91e1b322dcb3d782cd709b2 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:33:06 +0000 Subject: ARM: PL08x: add comment explaining the flow control methods Explain the two flow control methods which the PL08x implements, along with the problem which peripheral flow control presents. This helps people understand why we are unable to use these DMA controllers with (eg) the MMCI. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 74fa5a0f1490..4b63fc39a6df 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -53,7 +53,23 @@ * * ASSUMES default (little) endianness for DMA transfers * - * Only DMAC flow control is implemented + * The PL08x has two flow control settings: + * - DMAC flow control: the transfer size defines the number of transfers + * which occur for the current LLI entry, and the DMAC raises TC at the + * end of every LLI entry. Observed behaviour shows the DMAC listening + * to both the BREQ and SREQ signals (contrary to documented), + * transferring data if either is active. The LBREQ and LSREQ signals + * are ignored. + * + * - Peripheral flow control: the transfer size is ignored (and should be + * zero). The data is transferred from the current LLI entry, until + * after the final transfer signalled by LBREQ or LSREQ. The DMAC + * will then move to the next LLI entry. + * + * Only the former works sanely with scatter lists, so we only implement + * the DMAC flow control method. However, peripherals which use the LBREQ + * and LSREQ signals (eg, MMCI) are unable to use this mode, which through + * these hardware restrictions prevents them from using scatter DMA. * * Global TODO: * - Break out common code from arch/arm/mach-s3c64xx and share -- cgit v1.2.3 From b05cd8f4c04a29eebfa65c45fabc78a02f16a782 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:33:26 +0000 Subject: ARM: PL08x: improve the announcement printk Include the revision number of the PL08x primecell in the boot-time printk to allow proper identification of the peripheral. Reformat the announcement printk format reflect what we do for other primecell drivers - generally "PLXXX revX at 0xNNNNNNNN irq X". Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 4b63fc39a6df..75ab4e47a153 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -98,13 +98,11 @@ /** * struct vendor_data - vendor-specific config parameters * for PL08x derivatives - * @name: the name of this specific variant * @channels: the number of channels available in this variant * @dualmaster: whether this version supports dual AHB masters * or not. */ struct vendor_data { - char *name; u8 channels; bool dualmaster; }; @@ -2024,7 +2022,7 @@ static int pl08x_probe(struct amba_device *adev, struct amba_id *id) writel(0x000000FF, pl08x->base + PL080_TC_CLEAR); ret = request_irq(adev->irq[0], pl08x_irq, IRQF_DISABLED, - vd->name, pl08x); + DRIVER_NAME, pl08x); if (ret) { dev_err(&adev->dev, "%s failed to request interrupt %d\n", __func__, adev->irq[0]); @@ -2095,8 +2093,9 @@ static int pl08x_probe(struct amba_device *adev, struct amba_id *id) amba_set_drvdata(adev, pl08x); init_pl08x_debugfs(pl08x); - dev_info(&pl08x->adev->dev, "ARM(R) %s DMA block initialized @%08x\n", - vd->name, adev->res.start); + dev_info(&pl08x->adev->dev, "DMA: PL%03x rev%u at 0x%08llx irq %d\n", + amba_part(adev), amba_rev(adev), + (unsigned long long)adev->res.start, adev->irq[0]); return 0; out_no_slave_reg: @@ -2123,13 +2122,11 @@ out_no_pl08x: /* PL080 has 8 channels and the PL080 have just 2 */ static struct vendor_data vendor_pl080 = { - .name = "PL080", .channels = 8, .dualmaster = true, }; static struct vendor_data vendor_pl081 = { - .name = "PL081", .channels = 2, .dualmaster = false, }; -- cgit v1.2.3 From 9c132992689d7d27a4e17545b6279db4e03c0943 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:33:47 +0000 Subject: ARM: PL08x: prefix hex numbers with 0x A driver which emits both decimal and hex numbers in its printk creates confusion as to what is what. Prefix hex numbers with 0x. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 75ab4e47a153..c61774a3630e 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -199,8 +199,8 @@ static void pl08x_set_cregs(struct pl08x_driver_data *pl08x, ; dev_vdbg(&pl08x->adev->dev, - "WRITE channel %d: csrc=%08x, cdst=%08x, " - "cctl=%08x, clli=%08x, ccfg=%08x\n", + "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, " + "cctl=0x%08x, clli=0x%08x, ccfg=0x%08x\n", ch->id, ch->csrc, ch->cdst, @@ -731,7 +731,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, while (remainder) { dev_vdbg(&pl08x->adev->dev, "%s single byte LLIs for a transfer of " - "less than a bus width (remain %08x)\n", + "less than a bus width (remain 0x%08x)\n", __func__, remainder); cctl = pl08x_cctl_bits(cctl, 1, 1, 1); num_llis = @@ -747,7 +747,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, while ((mbus->addr) % (mbus->buswidth)) { dev_vdbg(&pl08x->adev->dev, "%s adjustment lli for less than bus width " - "(remain %08x)\n", + "(remain 0x%08x)\n", __func__, remainder); cctl = pl08x_cctl_bits(cctl, 1, 1, 1); num_llis = pl08x_fill_lli_for_desc @@ -865,7 +865,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, if (target_len != lli_len) { dev_vdbg(&pl08x->adev->dev, - "%s can't send what we want. Desired %08x, lli of %08x bytes in txd of %08x\n", + "%s can't send what we want. Desired 0x%08x, lli of 0x%08x bytes in txd of 0x%08x\n", __func__, target_len, lli_len, txd->len); } @@ -875,7 +875,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, tsize); dev_vdbg(&pl08x->adev->dev, - "%s fill lli with single lli chunk of size %08x (remainder %08x)\n", + "%s fill lli with single lli chunk of size 0x%08x (remainder 0x%08x)\n", __func__, lli_len, remainder); num_llis = pl08x_fill_lli_for_desc(pl08x, txd, num_llis, lli_len, cctl, @@ -894,7 +894,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, && (remainder); j++) { cctl = pl08x_cctl_bits(cctl, 1, 1, 1); dev_vdbg(&pl08x->adev->dev, - "%s align with boundary, single byte (remain %08x)\n", + "%s align with boundary, single byte (remain 0x%08x)\n", __func__, remainder); num_llis = pl08x_fill_lli_for_desc(pl08x, @@ -979,7 +979,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, for (i = 0; i < num_llis; i++) { dev_vdbg(&pl08x->adev->dev, - "lli %d @%p: csrc=%08x, cdst=%08x, cctl=%08x, clli=%08x\n", + "lli %d @%p: csrc=0x%08x, cdst=0x%08x, cctl=0x%08x, clli=0x%08x\n", i, &llis_va[i], llis_va[i].src, @@ -1289,7 +1289,7 @@ static void dma_set_runtime_config(struct dma_chan *chan, dev_dbg(&pl08x->adev->dev, "configured channel %s (%s) for %s, data width %d, " - "maxburst %d words, LE, CCTL=%08x, CCFG=%08x\n", + "maxburst %d words, LE, CCTL=0x%08x, CCFG=0x%08x\n", dma_chan_name(chan), plchan->name, (config->direction == DMA_FROM_DEVICE) ? "RX" : "TX", addr_width, -- cgit v1.2.3 From 730404ac1c47403af67420705980c99e90bf182f Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:34:07 +0000 Subject: ARM: PL08x: remove unnecessary includes We don't need to include linux/pci.h as we aren't a PCI driver. We aren't doing any processor specific functions, so asm/processor.h is not required. asm/cacheflush.h shouldn't be used, we have the DMA API for this. DMA interfaces aren't required as we're only implementing the dmaengine API and not a platform-private DMA API. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index c61774a3630e..d22d6280242d 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -77,21 +77,16 @@ #include #include #include -#include #include #include #include -#include #include +#include #include #include #include #include -#include -#include -#include -#include #define DRIVER_NAME "pl08xdmac" -- cgit v1.2.3 From ad0a3ad33c96cbba98ba62116771fb836c551e60 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:34:27 +0000 Subject: ARM: PL08x: remove unnecessary NULL and BUG checks The tasklet always is initialized with a non-NULL data argument. It is not possible for it to be called with a NULL data argument (unless something is very wrong in the tasklet code - in which case lots of stuff will break). Therefore, as plchan can never be NULL, remove this unnecessary BUG check. In pl08x_tasklet(), we've already dereferenced plchan->at, so it can't be NULL here. Remove this unnecessary BUG check. pl08x_fill_llis_for_desc() and pl08x_free_txd() are always called with a non-NULL txd argument - either as a consequence of the code paths or as a result of other checks already in place. We don't need to repeat the non-NULL check in these functions. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 21 --------------------- 1 file changed, 21 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index d22d6280242d..b721ed2e884d 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -623,11 +623,6 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, struct lli *llis_va; struct lli *llis_bus; - if (!txd) { - dev_err(&pl08x->adev->dev, "%s no descriptor\n", __func__); - return 0; - } - txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, &txd->llis_bus); if (!txd->llis_va) { @@ -993,11 +988,6 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, static void pl08x_free_txd(struct pl08x_driver_data *pl08x, struct pl08x_txd *txd) { - if (!txd) - dev_err(&pl08x->adev->dev, - "%s no descriptor to free\n", - __func__); - /* Free the LLI */ dma_pool_free(pl08x->pool, txd->llis_va, txd->llis_bus); @@ -1633,9 +1623,6 @@ static void pl08x_tasklet(unsigned long data) struct pl08x_driver_data *pl08x = plchan->host; unsigned long flags; - if (!plchan) - BUG(); - spin_lock_irqsave(&plchan->lock, flags); if (plchan->at) { @@ -1655,14 +1642,6 @@ static void pl08x_tasklet(unsigned long data) if (callback) callback(callback_param); - /* - * Device callbacks should NOT clear - * the current transaction on the channel - * Linus: sometimes they should? - */ - if (!plchan->at) - BUG(); - /* * Free the descriptor if it's not for a device * using a circular buffer -- cgit v1.2.3 From b58b6b5bedf4d5da7a0cb2dce3b42d010c3aef03 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:34:48 +0000 Subject: ARM: PL08x: remove circular buffer support The driver already won't initialize a channel with a circular buffer; the check in pl08x_prep_channel_resources() sees to that. Remove circular buffer support for the time being. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 71 ++++++++++++++---------------------------------- 1 file changed, 20 insertions(+), 51 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index b721ed2e884d..74b35910f295 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -927,39 +927,21 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, __func__, (u32) MAX_NUM_TSFR_LLIS); return 0; } + + llis_va = txd->llis_va; /* - * Decide whether this is a loop or a terminated transfer + * The final LLI terminates the LLI. */ - llis_va = txd->llis_va; - llis_bus = (struct lli *) txd->llis_bus; - - if (cd->circular_buffer) { - /* - * Loop the circular buffer so that the next element - * points back to the beginning of the LLI. - */ - llis_va[num_llis - 1].next = - (dma_addr_t)((unsigned int)&(llis_bus[0])); - } else { - /* - * On non-circular buffers, the final LLI terminates - * the LLI. - */ - llis_va[num_llis - 1].next = 0; - /* - * The final LLI element shall also fire an interrupt - */ - llis_va[num_llis - 1].cctl |= PL080_CONTROL_TC_IRQ_EN; - } + llis_va[num_llis - 1].next = 0; + /* + * The final LLI element shall also fire an interrupt + */ + llis_va[num_llis - 1].cctl |= PL080_CONTROL_TC_IRQ_EN; /* Now store the channel register values */ txd->csrc = llis_va[0].src; txd->cdst = llis_va[0].dst; - if (num_llis > 1) - txd->clli = llis_va[0].next; - else - txd->clli = 0; - + txd->clli = llis_va[0].next; txd->cctl = llis_va[0].cctl; /* ccfg will be set at physical channel allocation time */ @@ -1334,19 +1316,7 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, spin_lock_irqsave(&plchan->lock, plchan->lockflags); - /* - * If this device is not using a circular buffer then - * queue this new descriptor for transfer. - * The descriptor for a circular buffer continues - * to be used until the channel is freed. - */ - if (txd->cd->circular_buffer) - dev_err(&pl08x->adev->dev, - "%s attempting to queue a circular buffer\n", - __func__); - else - list_add_tail(&txd->node, - &plchan->desc_list); + list_add_tail(&txd->node, &plchan->desc_list); /* * See if we already have a physical channel allocated, @@ -1643,18 +1613,10 @@ static void pl08x_tasklet(unsigned long data) callback(callback_param); /* - * Free the descriptor if it's not for a device - * using a circular buffer - */ - if (!plchan->at->cd->circular_buffer) { - pl08x_free_txd(pl08x, plchan->at); - plchan->at = NULL; - } - /* - * else descriptor for circular - * buffers only freed when - * client has disabled dma + * Free the descriptor */ + pl08x_free_txd(pl08x, plchan->at); + plchan->at = NULL; } /* * If a new descriptor is queued, set it up @@ -1799,6 +1761,13 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, return -ENOMEM; } } + if (chan->cd->circular_buffer) { + dev_err(&pl08x->adev->dev, + "channel %s: circular buffers not supported\n", + chan->name); + kfree(chan); + continue; + } dev_info(&pl08x->adev->dev, "initialize virtual channel \"%s\"\n", chan->name); -- cgit v1.2.3 From f96ca9ec27159c1c8718aa8d0ed03051cd12e884 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:35:08 +0000 Subject: ARM: PL08x: constify vendor data pointers We should never modify the vendor data structure so make it const. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 74b35910f295..707fa081c9fa 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -132,7 +132,7 @@ struct pl08x_driver_data { struct dma_device memcpy; void __iomem *base; struct amba_device *adev; - struct vendor_data *vd; + const struct vendor_data *vd; struct pl08x_platform_data *pd; struct pl08x_phy_chan *phy_chans; struct dma_pool *pool; @@ -1891,7 +1891,7 @@ static inline void init_pl08x_debugfs(struct pl08x_driver_data *pl08x) static int pl08x_probe(struct amba_device *adev, struct amba_id *id) { struct pl08x_driver_data *pl08x; - struct vendor_data *vd = id->data; + const struct vendor_data *vd = id->data; int ret = 0; int i; -- cgit v1.2.3 From 7cb72ad959b16ac594118977b7954a7d2ec7a052 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:35:28 +0000 Subject: ARM: PL08x: avoid 'void *' struct fields when we can type them properly Avoid using 'void *' struct fields when the structs are not defined in linux/amba/pl08x.h - instead, forward declare the struct names, and use these instead. This ensures we have proper typechecking. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 16 ++++++++-------- include/linux/amba/pl08x.h | 5 ++++- 2 files changed, 12 insertions(+), 9 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 707fa081c9fa..fada97873d7d 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -107,7 +107,7 @@ struct vendor_data { * An LLI struct - see PL08x TRM. Note that next uses bit[0] as a bus bit, * start & end do not - their bus bit info is in cctl. */ -struct lli { +struct pl08x_lli { dma_addr_t src; dma_addr_t dst; dma_addr_t next; @@ -160,7 +160,7 @@ struct pl08x_driver_data { /* Maximum times we call dma_pool_alloc on this pool without freeing */ #define PL08X_MAX_ALLOCS 0x40 -#define MAX_NUM_TSFR_LLIS (PL08X_LLI_TSFR_SIZE/sizeof(struct lli)) +#define MAX_NUM_TSFR_LLIS (PL08X_LLI_TSFR_SIZE/sizeof(struct pl08x_lli)) #define PL08X_ALIGN 8 static inline struct pl08x_dma_chan *to_pl08x_chan(struct dma_chan *chan) @@ -354,8 +354,8 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) * currently active transaction. */ if (ch && txd) { - struct lli *llis_va = txd->llis_va; - struct lli *llis_bus = (struct lli *) txd->llis_bus; + struct pl08x_lli *llis_va = txd->llis_va; + struct pl08x_lli *llis_bus = (struct pl08x_lli *) txd->llis_bus; u32 clli = readl(ch->base + PL080_CH_LLI); /* First get the bytes in the current active LLI */ @@ -558,8 +558,8 @@ static int pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, struct pl08x_txd *txd, int num_llis, int len, u32 cctl, u32 *remainder) { - struct lli *llis_va = txd->llis_va; - struct lli *llis_bus = (struct lli *) txd->llis_bus; + struct pl08x_lli *llis_va = txd->llis_va; + struct pl08x_lli *llis_bus = (struct pl08x_lli *) txd->llis_bus; BUG_ON(num_llis >= MAX_NUM_TSFR_LLIS); @@ -620,8 +620,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, u32 cctl; int max_bytes_per_lli; int total_bytes = 0; - struct lli *llis_va; - struct lli *llis_bus; + struct pl08x_lli *llis_va; + struct pl08x_lli *llis_bus; txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, &txd->llis_bus); diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 4ae62b4684f9..3ecc20fce26a 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -22,6 +22,9 @@ #include #include +struct pl08x_lli; +struct pl08x_driver_data; + /** * struct pl08x_channel_data - data structure to pass info between * platform and PL08x driver regarding channel configuration @@ -179,7 +182,7 @@ struct pl08x_dma_chan { struct pl08x_txd *at; unsigned long lockflags; spinlock_t lock; - void *host; + struct pl08x_driver_data *host; enum pl08x_dma_chan_state state; bool slave; struct pl08x_txd *waiting; -- cgit v1.2.3 From ac3cd20df9d74bb205bb34f69407477a884ff8a3 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:35:49 +0000 Subject: ARM: PL08x: consolidate common txd initialization Consolidate code which allocates and initializes txds. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index fada97873d7d..d47255ee9504 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1363,6 +1363,18 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, return 0; } +static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan) +{ + struct pl08x_txd *txd = kzalloc(sizeof(struct pl08x_txd), GFP_NOWAIT); + + if (txd) { + dma_async_tx_descriptor_init(&txd->tx, &plchan->chan); + txd->tx.tx_submit = pl08x_tx_submit; + INIT_LIST_HEAD(&txd->node); + } + return txd; +} + /* * Initialize a descriptor to be used by memcpy submit */ @@ -1375,14 +1387,13 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( struct pl08x_txd *txd; int ret; - txd = kzalloc(sizeof(struct pl08x_txd), GFP_NOWAIT); + txd = pl08x_get_txd(plchan); if (!txd) { dev_err(&pl08x->adev->dev, "%s no memory for descriptor\n", __func__); return NULL; } - dma_async_tx_descriptor_init(&txd->tx, chan); txd->direction = DMA_NONE; txd->srcbus.addr = src; txd->dstbus.addr = dest; @@ -1391,12 +1402,8 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( txd->cd = &pl08x->pd->memcpy_channel; /* Both to be incremented or the code will break */ txd->cd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR; - txd->tx.tx_submit = pl08x_tx_submit; - txd->tx.callback = NULL; - txd->tx.callback_param = NULL; txd->len = len; - INIT_LIST_HEAD(&txd->node); ret = pl08x_prep_channel_resources(plchan, txd); if (ret) return NULL; @@ -1430,14 +1437,12 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n", __func__, sgl->length, plchan->name); - txd = kzalloc(sizeof(struct pl08x_txd), GFP_NOWAIT); + txd = pl08x_get_txd(plchan); if (!txd) { dev_err(&pl08x->adev->dev, "%s no txd\n", __func__); return NULL; } - dma_async_tx_descriptor_init(&txd->tx, chan); - if (direction != plchan->runtime_direction) dev_err(&pl08x->adev->dev, "%s DMA setup does not match " "the direction configured for the PrimeCell\n", @@ -1467,11 +1472,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( return NULL; } txd->cd = plchan->cd; - txd->tx.tx_submit = pl08x_tx_submit; - txd->tx.callback = NULL; - txd->tx.callback_param = NULL; txd->len = sgl->length; - INIT_LIST_HEAD(&txd->node); ret = pl08x_prep_channel_resources(plchan, txd); if (ret) -- cgit v1.2.3 From 8c8cc2b1040f51a2f89724edbf976774128339eb Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:36:09 +0000 Subject: ARM: PL08x: consolidate physical channel release code Consolidate duplicated channel release code into release_phy_channel() Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index d47255ee9504..e8967ff44fc2 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1058,6 +1058,18 @@ static int prep_phy_channel(struct pl08x_dma_chan *plchan, return 0; } +static void release_phy_channel(struct pl08x_dma_chan *plchan) +{ + struct pl08x_driver_data *pl08x = plchan->host; + + if ((plchan->phychan->signal >= 0) && pl08x->pd->put_signal) { + pl08x->pd->put_signal(plchan); + plchan->phychan->signal = -1; + } + pl08x_put_phy_channel(pl08x, plchan->phychan); + plchan->phychan = NULL; +} + static dma_cookie_t pl08x_tx_submit(struct dma_async_tx_descriptor *tx) { struct pl08x_dma_chan *plchan = to_pl08x_chan(tx->chan); @@ -1522,13 +1534,7 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, * Mark physical channel as free and free any slave * signal */ - if ((plchan->phychan->signal >= 0) && - pl08x->pd->put_signal) { - pl08x->pd->put_signal(plchan); - plchan->phychan->signal = -1; - } - pl08x_put_phy_channel(pl08x, plchan->phychan); - plchan->phychan = NULL; + release_phy_channel(plchan); } /* Dequeue jobs and free LLIs */ if (plchan->at) { @@ -1590,7 +1596,6 @@ static void pl08x_ensure_on(struct pl08x_driver_data *pl08x) static void pl08x_tasklet(unsigned long data) { struct pl08x_dma_chan *plchan = (struct pl08x_dma_chan *) data; - struct pl08x_phy_chan *phychan = plchan->phychan; struct pl08x_driver_data *pl08x = plchan->host; unsigned long flags; @@ -1642,12 +1647,7 @@ static void pl08x_tasklet(unsigned long data) * No more jobs, so free up the physical channel * Free any allocated signal on slave transfers too */ - if ((phychan->signal >= 0) && pl08x->pd->put_signal) { - pl08x->pd->put_signal(plchan); - phychan->signal = -1; - } - pl08x_put_phy_channel(pl08x, phychan); - plchan->phychan = NULL; + release_phy_channel(plchan); plchan->state = PL08X_CHAN_IDLE; /* -- cgit v1.2.3 From 19386b3234fdbe4d33492574d83e63a8dace18d3 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:36:29 +0000 Subject: ARM: PL08x: ensure loops use cpu_relax() Tight loops should use cpu_relax() to allow CPUs to reduce power consumption while waiting for events. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index e8967ff44fc2..78c84b3f903d 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -191,7 +191,7 @@ static void pl08x_set_cregs(struct pl08x_driver_data *pl08x, { /* Wait for channel inactive */ while (pl08x_phy_channel_busy(ch)) - ; + cpu_relax(); dev_vdbg(&pl08x->adev->dev, "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, " @@ -255,7 +255,7 @@ static void pl08x_enable_phy_chan(struct pl08x_driver_data *pl08x, * Do not access config register until channel shows as disabled */ while (readl(pl08x->base + PL080_EN_CHAN) & (1 << ch->id)) - ; + cpu_relax(); /* * Do not access config register until channel shows as inactive @@ -288,7 +288,7 @@ static void pl08x_pause_phy_chan(struct pl08x_phy_chan *ch) /* Wait for channel inactive */ while (pl08x_phy_channel_busy(ch)) - ; + cpu_relax(); } static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch) -- cgit v1.2.3 From 4c0df6a3ce8eb947647c7ed2640d0172936d8ef3 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:36:50 +0000 Subject: ARM: PL08x: don't assume that the LLI pointer has the bus bit clear We only want use the address of the LLI pointer when locating the corresponding structure in memory, so clear the master bus selection bit. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 78c84b3f903d..1081165d01a3 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -356,7 +356,7 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) if (ch && txd) { struct pl08x_lli *llis_va = txd->llis_va; struct pl08x_lli *llis_bus = (struct pl08x_lli *) txd->llis_bus; - u32 clli = readl(ch->base + PL080_CH_LLI); + u32 clli = readl(ch->base + PL080_CH_LLI) & ~PL080_LLI_LM_AHB2; /* First get the bytes in the current active LLI */ bytes = get_bytes_in_cctl(readl(ch->base + PL080_CH_CONTROL)); -- cgit v1.2.3 From 56b618820c92a5efa2145fbbac373fffbb024a94 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:37:10 +0000 Subject: ARM: PL08x: don't try to use llis_bus as a pointer llis_bus is the DMA address of the LLI array. Casting it to be a pointer just to be able to use pointer arithmetic on it is not nice. We can trivially deal with the places where we do arithmetic on it, and it's actually cleaner this way. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 1081165d01a3..760b71eec84c 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -559,7 +559,7 @@ static int pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, u32 cctl, u32 *remainder) { struct pl08x_lli *llis_va = txd->llis_va; - struct pl08x_lli *llis_bus = (struct pl08x_lli *) txd->llis_bus; + dma_addr_t llis_bus = txd->llis_bus; BUG_ON(num_llis >= MAX_NUM_TSFR_LLIS); @@ -576,8 +576,7 @@ static int pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, * memory. So we don't manipulate this bit currently. */ - llis_va[num_llis].next = - (dma_addr_t)((u32) &(llis_bus[num_llis + 1])); + llis_va[num_llis].next = llis_bus + (num_llis + 1) * sizeof(struct pl08x_lli); if (cctl & PL080_CONTROL_SRC_INCR) txd->srcbus.addr += len; @@ -621,7 +620,6 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, int max_bytes_per_lli; int total_bytes = 0; struct pl08x_lli *llis_va; - struct pl08x_lli *llis_bus; txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, &txd->llis_bus); @@ -971,8 +969,7 @@ static void pl08x_free_txd(struct pl08x_driver_data *pl08x, struct pl08x_txd *txd) { /* Free the LLI */ - dma_pool_free(pl08x->pool, txd->llis_va, - txd->llis_bus); + dma_pool_free(pl08x->pool, txd->llis_va, txd->llis_bus); pl08x->pool_ctr--; -- cgit v1.2.3 From cace658572ba5d1075f3891e823130a66f3e330f Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:37:31 +0000 Subject: ARM: PL08x: use 'size_t' for lengths Use size_t for variables denoting lengths throughout, and use the 'z' qualifier for printing the value. For safety, add a BUG_ON() in pl08x_fill_lli_for_desc() to catch the remainder potentially becoming negative. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 40 +++++++++++++++++----------------------- include/linux/amba/pl08x.h | 4 ++-- 2 files changed, 19 insertions(+), 25 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 760b71eec84c..fa78697790c0 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -342,7 +342,7 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) struct pl08x_txd *txdi = NULL; struct pl08x_txd *txd; unsigned long flags; - u32 bytes = 0; + size_t bytes = 0; spin_lock_irqsave(&plchan->lock, flags); @@ -470,7 +470,7 @@ static inline unsigned int pl08x_get_bytes_for_cctl(unsigned int coded) } static inline u32 pl08x_cctl_bits(u32 cctl, u8 srcwidth, u8 dstwidth, - u32 tsize) + size_t tsize) { u32 retbits = cctl; @@ -583,6 +583,8 @@ static int pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, if (cctl & PL080_CONTROL_DST_INCR) txd->dstbus.addr += len; + BUG_ON(*remainder < len); + *remainder -= len; return num_llis + 1; @@ -591,7 +593,7 @@ static int pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, /* * Return number of bytes to fill to boundary, or len */ -static inline u32 pl08x_pre_boundary(u32 addr, u32 len) +static inline size_t pl08x_pre_boundary(u32 addr, size_t len) { u32 boundary; @@ -614,11 +616,11 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, { struct pl08x_channel_data *cd = txd->cd; struct pl08x_bus_data *mbus, *sbus; - u32 remainder; + size_t remainder; int num_llis = 0; u32 cctl; - int max_bytes_per_lli; - int total_bytes = 0; + size_t max_bytes_per_lli; + size_t total_bytes = 0; struct pl08x_lli *llis_va; txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, @@ -686,13 +688,13 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, max_bytes_per_lli = min(txd->srcbus.buswidth, txd->dstbus.buswidth) * PL080_CONTROL_TRANSFER_SIZE_MASK; dev_vdbg(&pl08x->adev->dev, - "%s max bytes per lli = %d\n", + "%s max bytes per lli = %zu\n", __func__, max_bytes_per_lli); /* We need to count this down to zero */ remainder = txd->len; dev_vdbg(&pl08x->adev->dev, - "%s remainder = %d\n", + "%s remainder = %zu\n", __func__, remainder); /* @@ -760,9 +762,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, * width left */ while (remainder > (mbus->buswidth - 1)) { - int lli_len, target_len; - int tsize; - int odd_bytes; + size_t lli_len, target_len, tsize, odd_bytes; /* * If enough left try to send max possible, @@ -805,7 +805,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, if (lli_len <= 0) { dev_err(&pl08x->adev->dev, - "%s lli_len is %d, <= 0\n", + "%s lli_len is %zu, <= 0\n", __func__, lli_len); return 0; } @@ -853,7 +853,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, if (target_len != lli_len) { dev_vdbg(&pl08x->adev->dev, - "%s can't send what we want. Desired 0x%08x, lli of 0x%08x bytes in txd of 0x%08x\n", + "%s can't send what we want. Desired 0x%08zx, lli of 0x%08zx bytes in txd of 0x%08zx\n", __func__, target_len, lli_len, txd->len); } @@ -863,7 +863,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, tsize); dev_vdbg(&pl08x->adev->dev, - "%s fill lli with single lli chunk of size 0x%08x (remainder 0x%08x)\n", + "%s fill lli with single lli chunk of size 0x%08zx (remainder 0x%08zx)\n", __func__, lli_len, remainder); num_llis = pl08x_fill_lli_for_desc(pl08x, txd, num_llis, lli_len, cctl, @@ -882,7 +882,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, && (remainder); j++) { cctl = pl08x_cctl_bits(cctl, 1, 1, 1); dev_vdbg(&pl08x->adev->dev, - "%s align with boundary, single byte (remain 0x%08x)\n", + "%s align with boundary, single byte (remain 0x%08zx)\n", __func__, remainder); num_llis = pl08x_fill_lli_for_desc(pl08x, @@ -896,16 +896,10 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, /* * Send any odd bytes */ - if (remainder < 0) { - dev_err(&pl08x->adev->dev, "%s remainder not fitted 0x%08x bytes\n", - __func__, remainder); - return 0; - } - while (remainder) { cctl = pl08x_cctl_bits(cctl, 1, 1, 1); dev_vdbg(&pl08x->adev->dev, - "%s align with boundary, single odd byte (remain %d)\n", + "%s align with boundary, single odd byte (remain %zu)\n", __func__, remainder); num_llis = pl08x_fill_lli_for_desc(pl08x, txd, num_llis, 1, cctl, &remainder); @@ -914,7 +908,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, } if (total_bytes != txd->len) { dev_err(&pl08x->adev->dev, - "%s size of encoded lli:s don't match total txd, transferred 0x%08x from size 0x%08x\n", + "%s size of encoded lli:s don't match total txd, transferred 0x%08zx from size 0x%08zx\n", __func__, total_bytes, txd->len); return 0; } diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 3ecc20fce26a..2c834ed5f41f 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -77,7 +77,7 @@ struct pl08x_bus_data { dma_addr_t addr; u8 maxwidth; u8 buswidth; - u32 fill_bytes; + size_t fill_bytes; }; /** @@ -113,7 +113,7 @@ struct pl08x_txd { enum dma_data_direction direction; struct pl08x_bus_data srcbus; struct pl08x_bus_data dstbus; - int len; + size_t len; dma_addr_t llis_bus; void *llis_va; struct pl08x_channel_data *cd; -- cgit v1.2.3 From e25761d72c80751c8741f5f93abab14232eef347 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:37:52 +0000 Subject: ARM: PL08x: use 'u32' for LLI structure members, not dma_addr_t Use 'u32' for the LLI structure members, which are defined by hardware to be 32-bit. dma_addr_t is much more vague about its actual size. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index fa78697790c0..a389df501f70 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -105,12 +105,13 @@ struct vendor_data { /* * PL08X private data structures * An LLI struct - see PL08x TRM. Note that next uses bit[0] as a bus bit, - * start & end do not - their bus bit info is in cctl. + * start & end do not - their bus bit info is in cctl. Also note that these + * are fixed 32-bit quantities. */ struct pl08x_lli { - dma_addr_t src; - dma_addr_t dst; - dma_addr_t next; + u32 src; + u32 dst; + u32 next; u32 cctl; }; -- cgit v1.2.3 From bfddfb45056fa95a778f0baf463ac0f9fc926d5c Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:38:12 +0000 Subject: ARM: PL08x: rename lli.next to lli.lli The LLI pointer in the documentation is placed into the LLI register, so name it LLI rather than 'next'. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index a389df501f70..a897315261bc 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -111,7 +111,7 @@ struct vendor_data { struct pl08x_lli { u32 src; u32 dst; - u32 next; + u32 lli; u32 cctl; }; @@ -375,7 +375,7 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) /* * A LLI pointer of 0 terminates the LLI list */ - clli = llis_va[i].next; + clli = llis_va[i].lli; i++; } } @@ -577,7 +577,7 @@ static int pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, * memory. So we don't manipulate this bit currently. */ - llis_va[num_llis].next = llis_bus + (num_llis + 1) * sizeof(struct pl08x_lli); + llis_va[num_llis].lli = llis_bus + (num_llis + 1) * sizeof(struct pl08x_lli); if (cctl & PL080_CONTROL_SRC_INCR) txd->srcbus.addr += len; @@ -925,7 +925,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, /* * The final LLI terminates the LLI. */ - llis_va[num_llis - 1].next = 0; + llis_va[num_llis - 1].lli = 0; /* * The final LLI element shall also fire an interrupt */ @@ -934,7 +934,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, /* Now store the channel register values */ txd->csrc = llis_va[0].src; txd->cdst = llis_va[0].dst; - txd->clli = llis_va[0].next; + txd->clli = llis_va[0].lli; txd->cctl = llis_va[0].cctl; /* ccfg will be set at physical channel allocation time */ @@ -950,7 +950,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, llis_va[i].src, llis_va[i].dst, llis_va[i].cctl, - llis_va[i].next + llis_va[i].lli ); } } -- cgit v1.2.3 From db9f136a60c8727c8e1c9c4f2494821caebf5a7b Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:38:32 +0000 Subject: ARM: PL08x: clean up LLI lookup As the LLI list is an array, we can use maths to locate which LLI index we're currently at, and then sum up the remaining LLI entries until we reach the end of the list. This makes the code much easier to read, and much less susceptible to falling off the end of the array. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 37 ++++++++++++++++++++----------------- 1 file changed, 20 insertions(+), 17 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index a897315261bc..202c9e2d2e9e 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -340,53 +340,56 @@ static inline u32 get_bytes_in_cctl(u32 cctl) static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) { struct pl08x_phy_chan *ch; - struct pl08x_txd *txdi = NULL; struct pl08x_txd *txd; unsigned long flags; size_t bytes = 0; spin_lock_irqsave(&plchan->lock, flags); - ch = plchan->phychan; txd = plchan->at; /* - * Next follow the LLIs to get the number of pending bytes in the - * currently active transaction. + * Follow the LLIs to get the number of remaining + * bytes in the currently active transaction. */ if (ch && txd) { - struct pl08x_lli *llis_va = txd->llis_va; - struct pl08x_lli *llis_bus = (struct pl08x_lli *) txd->llis_bus; u32 clli = readl(ch->base + PL080_CH_LLI) & ~PL080_LLI_LM_AHB2; - /* First get the bytes in the current active LLI */ + /* First get the remaining bytes in the active transfer */ bytes = get_bytes_in_cctl(readl(ch->base + PL080_CH_CONTROL)); if (clli) { - int i = 0; + struct pl08x_lli *llis_va = txd->llis_va; + dma_addr_t llis_bus = txd->llis_bus; + int index; - /* Forward to the LLI pointed to by clli */ - while ((clli != (u32) &(llis_bus[i])) && - (i < MAX_NUM_TSFR_LLIS)) - i++; + BUG_ON(clli < llis_bus || clli >= llis_bus + + sizeof(struct pl08x_lli) * MAX_NUM_TSFR_LLIS); + + /* + * Locate the next LLI - as this is an array, + * it's simple maths to find. + */ + index = (clli - llis_bus) / sizeof(struct pl08x_lli); + + for (; index < MAX_NUM_TSFR_LLIS; index++) { + bytes += get_bytes_in_cctl(llis_va[index].cctl); - while (clli) { - bytes += get_bytes_in_cctl(llis_va[i].cctl); /* * A LLI pointer of 0 terminates the LLI list */ - clli = llis_va[i].lli; - i++; + if (!llis_va[index].lli) + break; } } } /* Sum up all queued transactions */ if (!list_empty(&plchan->desc_list)) { + struct pl08x_txd *txdi; list_for_each_entry(txdi, &plchan->desc_list, node) { bytes += txdi->len; } - } spin_unlock_irqrestore(&plchan->lock, flags); -- cgit v1.2.3 From c885bee4f10323a1ff3f19e1aa2aa6f4e7f89dd8 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:38:52 +0000 Subject: ARM: PL08x: combine functions to start DMA into one function There is no need for pl08x_config_phychan_for_txd(), pl08x_set_cregs() and pl08x_enable_phy_chan() to be separate - they are always called in sequence. Combine them into one function. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 98 +++++++++++++++++++----------------------------- 1 file changed, 38 insertions(+), 60 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 202c9e2d2e9e..c025a4b4bae4 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -185,37 +185,17 @@ static int pl08x_phy_channel_busy(struct pl08x_phy_chan *ch) /* * Set the initial DMA register values i.e. those for the first LLI * The next LLI pointer and the configuration interrupt bit have - * been set when the LLIs were constructed + * been set when the LLIs were constructed. Poke them into the hardware + * and start the transfer. */ -static void pl08x_set_cregs(struct pl08x_driver_data *pl08x, - struct pl08x_phy_chan *ch) +static void pl08x_start_txd(struct pl08x_dma_chan *plchan, + struct pl08x_txd *txd) { - /* Wait for channel inactive */ - while (pl08x_phy_channel_busy(ch)) - cpu_relax(); - - dev_vdbg(&pl08x->adev->dev, - "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, " - "cctl=0x%08x, clli=0x%08x, ccfg=0x%08x\n", - ch->id, - ch->csrc, - ch->cdst, - ch->cctl, - ch->clli, - ch->ccfg); - - writel(ch->csrc, ch->base + PL080_CH_SRC_ADDR); - writel(ch->cdst, ch->base + PL080_CH_DST_ADDR); - writel(ch->clli, ch->base + PL080_CH_LLI); - writel(ch->cctl, ch->base + PL080_CH_CONTROL); - writel(ch->ccfg, ch->base + PL080_CH_CONFIG); -} - -static inline void pl08x_config_phychan_for_txd(struct pl08x_dma_chan *plchan) -{ - struct pl08x_channel_data *cd = plchan->cd; + struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_phy_chan *phychan = plchan->phychan; - struct pl08x_txd *txd = plchan->at; + u32 val; + + plchan->at = txd; /* Copy the basic control register calculated at transfer config */ phychan->csrc = txd->csrc; @@ -224,7 +204,7 @@ static inline void pl08x_config_phychan_for_txd(struct pl08x_dma_chan *plchan) phychan->cctl = txd->cctl; /* Assign the signal to the proper control registers */ - phychan->ccfg = cd->ccfg; + phychan->ccfg = plchan->cd->ccfg; phychan->ccfg &= ~PL080_CONFIG_SRC_SEL_MASK; phychan->ccfg &= ~PL080_CONFIG_DST_SEL_MASK; /* If it wasn't set from AMBA, ignore it */ @@ -240,32 +220,38 @@ static inline void pl08x_config_phychan_for_txd(struct pl08x_dma_chan *plchan) phychan->ccfg |= PL080_CONFIG_ERR_IRQ_MASK; /* Always enable terminal interrupts */ phychan->ccfg |= PL080_CONFIG_TC_IRQ_MASK; -} -/* - * Enable the DMA channel - * Assumes all other configuration bits have been set - * as desired before this code is called - */ -static void pl08x_enable_phy_chan(struct pl08x_driver_data *pl08x, - struct pl08x_phy_chan *ch) -{ - u32 val; + /* Wait for channel inactive */ + while (pl08x_phy_channel_busy(phychan)) + cpu_relax(); - /* - * Do not access config register until channel shows as disabled - */ - while (readl(pl08x->base + PL080_EN_CHAN) & (1 << ch->id)) + dev_vdbg(&pl08x->adev->dev, + "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, " + "cctl=0x%08x, clli=0x%08x, ccfg=0x%08x\n", + phychan->id, + phychan->csrc, + phychan->cdst, + phychan->cctl, + phychan->clli, + phychan->ccfg); + + writel(phychan->csrc, phychan->base + PL080_CH_SRC_ADDR); + writel(phychan->cdst, phychan->base + PL080_CH_DST_ADDR); + writel(phychan->clli, phychan->base + PL080_CH_LLI); + writel(phychan->cctl, phychan->base + PL080_CH_CONTROL); + writel(phychan->ccfg, phychan->base + PL080_CH_CONFIG); + + /* Enable the DMA channel */ + /* Do not access config register until channel shows as disabled */ + while (readl(pl08x->base + PL080_EN_CHAN) & (1 << phychan->id)) cpu_relax(); - /* - * Do not access config register until channel shows as inactive - */ - val = readl(ch->base + PL080_CH_CONFIG); + /* Do not access config register until channel shows as inactive */ + val = readl(phychan->base + PL080_CH_CONFIG); while ((val & PL080_CONFIG_ACTIVE) || (val & PL080_CONFIG_ENABLE)) - val = readl(ch->base + PL080_CH_CONFIG); + val = readl(phychan->base + PL080_CH_CONFIG); - writel(val | PL080_CONFIG_ENABLE, ch->base + PL080_CH_CONFIG); + writel(val | PL080_CONFIG_ENABLE, phychan->base + PL080_CH_CONFIG); } /* @@ -1278,7 +1264,6 @@ static void dma_set_runtime_config(struct dma_chan *chan, static void pl08x_issue_pending(struct dma_chan *chan) { struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); - struct pl08x_driver_data *pl08x = plchan->host; unsigned long flags; spin_lock_irqsave(&plchan->lock, flags); @@ -1296,13 +1281,9 @@ static void pl08x_issue_pending(struct dma_chan *chan) struct pl08x_txd, node); list_del(&next->node); - plchan->at = next; plchan->state = PL08X_CHAN_RUNNING; - /* Configure the physical channel for the active txd */ - pl08x_config_phychan_for_txd(plchan); - pl08x_set_cregs(pl08x, plchan->phychan); - pl08x_enable_phy_chan(pl08x, plchan->phychan); + pl08x_start_txd(plchan, next); } spin_unlock_irqrestore(&plchan->lock, flags); @@ -1630,11 +1611,8 @@ static void pl08x_tasklet(unsigned long data) struct pl08x_txd, node); list_del(&next->node); - plchan->at = next; - /* Configure the physical channel for the next txd */ - pl08x_config_phychan_for_txd(plchan); - pl08x_set_cregs(pl08x, plchan->phychan); - pl08x_enable_phy_chan(pl08x, plchan->phychan); + + pl08x_start_txd(plchan, next); } else { struct pl08x_dma_chan *waiting = NULL; -- cgit v1.2.3 From 19524d77ec34faf58d313ba34fb755ef6e159216 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:39:13 +0000 Subject: ARM: PL08x: avoid duplicating registers in txd and phychan structures As we now have all the code accessing the phychan {csrc,cdst,clli,cctl, ccfg} members in one function, there's no point storing the data into the struct. Get rid of the struct members. Re-order the register dump in the dev_dbg() to reflect the order we write the registers to the DMA device. The txd {csrc,cdst,clli,cctl} values are duplicates of the lli[0] values, so there's no point duplicating these either. Program the DMAC registers directly from the lli[0] values. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 57 ++++++++++++++++------------------------------ include/linux/amba/pl08x.h | 13 ----------- 2 files changed, 19 insertions(+), 51 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index c025a4b4bae4..a1a18bde6b7f 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -193,33 +193,25 @@ static void pl08x_start_txd(struct pl08x_dma_chan *plchan, { struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_phy_chan *phychan = plchan->phychan; - u32 val; + struct pl08x_lli *lli = &txd->llis_va[0]; + u32 val, ccfg; plchan->at = txd; - /* Copy the basic control register calculated at transfer config */ - phychan->csrc = txd->csrc; - phychan->cdst = txd->cdst; - phychan->clli = txd->clli; - phychan->cctl = txd->cctl; - /* Assign the signal to the proper control registers */ - phychan->ccfg = plchan->cd->ccfg; - phychan->ccfg &= ~PL080_CONFIG_SRC_SEL_MASK; - phychan->ccfg &= ~PL080_CONFIG_DST_SEL_MASK; + ccfg = plchan->cd->ccfg; + ccfg &= ~(PL080_CONFIG_SRC_SEL_MASK | PL080_CONFIG_DST_SEL_MASK); + /* If it wasn't set from AMBA, ignore it */ if (txd->direction == DMA_TO_DEVICE) /* Select signal as destination */ - phychan->ccfg |= - (phychan->signal << PL080_CONFIG_DST_SEL_SHIFT); + ccfg |= phychan->signal << PL080_CONFIG_DST_SEL_SHIFT; else if (txd->direction == DMA_FROM_DEVICE) /* Select signal as source */ - phychan->ccfg |= - (phychan->signal << PL080_CONFIG_SRC_SEL_SHIFT); - /* Always enable error interrupts */ - phychan->ccfg |= PL080_CONFIG_ERR_IRQ_MASK; - /* Always enable terminal interrupts */ - phychan->ccfg |= PL080_CONFIG_TC_IRQ_MASK; + ccfg |= phychan->signal << PL080_CONFIG_SRC_SEL_SHIFT; + + /* Always enable error and terminal interrupts */ + ccfg |= PL080_CONFIG_ERR_IRQ_MASK | PL080_CONFIG_TC_IRQ_MASK; /* Wait for channel inactive */ while (pl08x_phy_channel_busy(phychan)) @@ -227,19 +219,15 @@ static void pl08x_start_txd(struct pl08x_dma_chan *plchan, dev_vdbg(&pl08x->adev->dev, "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, " - "cctl=0x%08x, clli=0x%08x, ccfg=0x%08x\n", - phychan->id, - phychan->csrc, - phychan->cdst, - phychan->cctl, - phychan->clli, - phychan->ccfg); - - writel(phychan->csrc, phychan->base + PL080_CH_SRC_ADDR); - writel(phychan->cdst, phychan->base + PL080_CH_DST_ADDR); - writel(phychan->clli, phychan->base + PL080_CH_LLI); - writel(phychan->cctl, phychan->base + PL080_CH_CONTROL); - writel(phychan->ccfg, phychan->base + PL080_CH_CONFIG); + "clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n", + phychan->id, lli->src, lli->dst, lli->lli, lli->cctl, + ccfg); + + writel(lli->src, phychan->base + PL080_CH_SRC_ADDR); + writel(lli->dst, phychan->base + PL080_CH_DST_ADDR); + writel(lli->lli, phychan->base + PL080_CH_LLI); + writel(lli->cctl, phychan->base + PL080_CH_CONTROL); + writel(ccfg, phychan->base + PL080_CH_CONFIG); /* Enable the DMA channel */ /* Do not access config register until channel shows as disabled */ @@ -920,13 +908,6 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, */ llis_va[num_llis - 1].cctl |= PL080_CONTROL_TC_IRQ_EN; - /* Now store the channel register values */ - txd->csrc = llis_va[0].src; - txd->cdst = llis_va[0].dst; - txd->clli = llis_va[0].lli; - txd->cctl = llis_va[0].cctl; - /* ccfg will be set at physical channel allocation time */ - #ifdef VERBOSE_DEBUG { int i; diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 2c834ed5f41f..29d974562df9 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -95,11 +95,6 @@ struct pl08x_phy_chan { spinlock_t lock; int signal; struct pl08x_dma_chan *serving; - u32 csrc; - u32 cdst; - u32 clli; - u32 cctl; - u32 ccfg; }; /** @@ -118,14 +113,6 @@ struct pl08x_txd { void *llis_va; struct pl08x_channel_data *cd; bool active; - /* - * Settings to be put into the physical channel when we - * trigger this txd - */ - u32 csrc; - u32 cdst; - u32 clli; - u32 cctl; }; /** -- cgit v1.2.3 From 4983a04fd2562986360b646b378f267308bc22c0 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:39:33 +0000 Subject: ARM: PL08x: move ccfg into txd structure The ccfg register is used to configure the channel parameters - the type and direction of transfer, the flow control signal and IRQ mask enables. The type and direction of transfer is known in the relevent prep_* function where a txd is created. The IRQ mask enables are always set, and the flow control signals are always set when we start processing a txd according to phychan->signal. If we store the ccfg value in the txd structure, we can avoid modifying platform data - and even having it in platform data at all. So, remove it from platform data too. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 28 ++++++++++++---------------- include/linux/amba/pl08x.h | 6 +++++- 2 files changed, 17 insertions(+), 17 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index a1a18bde6b7f..75f9e2d4b032 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -194,15 +194,11 @@ static void pl08x_start_txd(struct pl08x_dma_chan *plchan, struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_phy_chan *phychan = plchan->phychan; struct pl08x_lli *lli = &txd->llis_va[0]; - u32 val, ccfg; + u32 val, ccfg = txd->ccfg; plchan->at = txd; - /* Assign the signal to the proper control registers */ - ccfg = plchan->cd->ccfg; - ccfg &= ~(PL080_CONFIG_SRC_SEL_MASK | PL080_CONFIG_DST_SEL_MASK); - - /* If it wasn't set from AMBA, ignore it */ + /* Assign the flow control signal to this channel */ if (txd->direction == DMA_TO_DEVICE) /* Select signal as destination */ ccfg |= phychan->signal << PL080_CONFIG_DST_SEL_SHIFT; @@ -210,9 +206,6 @@ static void pl08x_start_txd(struct pl08x_dma_chan *plchan, /* Select signal as source */ ccfg |= phychan->signal << PL080_CONFIG_SRC_SEL_SHIFT; - /* Always enable error and terminal interrupts */ - ccfg |= PL080_CONFIG_ERR_IRQ_MASK | PL080_CONFIG_TC_IRQ_MASK; - /* Wait for channel inactive */ while (pl08x_phy_channel_busy(phychan)) cpu_relax(); @@ -1161,8 +1154,6 @@ static void dma_set_runtime_config(struct dma_chan *chan, enum dma_slave_buswidth addr_width; u32 maxburst; u32 cctl = 0; - /* Mask out all except src and dst channel */ - u32 ccfg = cd->ccfg & 0x000003DEU; int i; /* Transfer direction */ @@ -1170,13 +1161,11 @@ static void dma_set_runtime_config(struct dma_chan *chan, if (config->direction == DMA_TO_DEVICE) { plchan->runtime_addr = config->dst_addr; cctl |= PL080_CONTROL_SRC_INCR; - ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT; addr_width = config->dst_addr_width; maxburst = config->dst_maxburst; } else if (config->direction == DMA_FROM_DEVICE) { plchan->runtime_addr = config->src_addr; cctl |= PL080_CONTROL_DST_INCR; - ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; addr_width = config->src_addr_width; maxburst = config->src_maxburst; } else { @@ -1226,16 +1215,15 @@ static void dma_set_runtime_config(struct dma_chan *chan, /* Modify the default channel data to fit PrimeCell request */ cd->cctl = cctl; - cd->ccfg = ccfg; dev_dbg(&pl08x->adev->dev, "configured channel %s (%s) for %s, data width %d, " - "maxburst %d words, LE, CCTL=0x%08x, CCFG=0x%08x\n", + "maxburst %d words, LE, CCTL=0x%08x\n", dma_chan_name(chan), plchan->name, (config->direction == DMA_FROM_DEVICE) ? "RX" : "TX", addr_width, maxburst, - cctl, ccfg); + cctl); } /* @@ -1340,6 +1328,10 @@ static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan) dma_async_tx_descriptor_init(&txd->tx, &plchan->chan); txd->tx.tx_submit = pl08x_tx_submit; INIT_LIST_HEAD(&txd->node); + + /* Always enable error and terminal interrupts */ + txd->ccfg = PL080_CONFIG_ERR_IRQ_MASK | + PL080_CONFIG_TC_IRQ_MASK; } return txd; } @@ -1369,6 +1361,8 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( /* Set platform data for m2m */ txd->cd = &pl08x->pd->memcpy_channel; + txd->ccfg |= PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; + /* Both to be incremented or the code will break */ txd->cd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR; txd->len = len; @@ -1424,12 +1418,14 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( */ txd->direction = direction; if (direction == DMA_TO_DEVICE) { + txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->srcbus.addr = sgl->dma_address; if (plchan->runtime_addr) txd->dstbus.addr = plchan->runtime_addr; else txd->dstbus.addr = plchan->cd->addr; } else if (direction == DMA_FROM_DEVICE) { + txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; if (plchan->runtime_addr) txd->srcbus.addr = plchan->runtime_addr; else diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 29d974562df9..8e74cb1845dd 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -58,7 +58,6 @@ struct pl08x_channel_data { int max_signal; u32 muxval; u32 cctl; - u32 ccfg; dma_addr_t addr; bool circular_buffer; bool single; @@ -113,6 +112,11 @@ struct pl08x_txd { void *llis_va; struct pl08x_channel_data *cd; bool active; + /* + * Settings to be put into the physical channel when we + * trigger this txd. Other registers are in llis_va[0]. + */ + u32 ccfg; }; /** -- cgit v1.2.3 From 09b3c323332206aaadfb7aa13efffa82e7719b35 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:39:53 +0000 Subject: ARM: PL08x: assign ccfg DMA request signal in prep_phy_channel() There is no need to wait until we start processing a tx descriptor before setting up the DMA request selection in the ccfg register. We know which channel and request will be used in prep_phy_channel(), so setup the ccfg request selection at txd creation time in prep_phy_channel(). Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 75f9e2d4b032..f0a29885cb83 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -194,18 +194,10 @@ static void pl08x_start_txd(struct pl08x_dma_chan *plchan, struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_phy_chan *phychan = plchan->phychan; struct pl08x_lli *lli = &txd->llis_va[0]; - u32 val, ccfg = txd->ccfg; + u32 val; plchan->at = txd; - /* Assign the flow control signal to this channel */ - if (txd->direction == DMA_TO_DEVICE) - /* Select signal as destination */ - ccfg |= phychan->signal << PL080_CONFIG_DST_SEL_SHIFT; - else if (txd->direction == DMA_FROM_DEVICE) - /* Select signal as source */ - ccfg |= phychan->signal << PL080_CONFIG_SRC_SEL_SHIFT; - /* Wait for channel inactive */ while (pl08x_phy_channel_busy(phychan)) cpu_relax(); @@ -214,13 +206,13 @@ static void pl08x_start_txd(struct pl08x_dma_chan *plchan, "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, " "clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n", phychan->id, lli->src, lli->dst, lli->lli, lli->cctl, - ccfg); + txd->ccfg); writel(lli->src, phychan->base + PL080_CH_SRC_ADDR); writel(lli->dst, phychan->base + PL080_CH_DST_ADDR); writel(lli->lli, phychan->base + PL080_CH_LLI); writel(lli->cctl, phychan->base + PL080_CH_CONTROL); - writel(ccfg, phychan->base + PL080_CH_CONFIG); + writel(txd->ccfg, phychan->base + PL080_CH_CONFIG); /* Enable the DMA channel */ /* Do not access config register until channel shows as disabled */ @@ -1001,6 +993,12 @@ static int prep_phy_channel(struct pl08x_dma_chan *plchan, return -EBUSY; } ch->signal = ret; + + /* Assign the flow control signal to this channel */ + if (txd->direction == DMA_TO_DEVICE) + txd->ccfg |= ch->signal << PL080_CONFIG_DST_SEL_SHIFT; + else if (txd->direction == DMA_FROM_DEVICE) + txd->ccfg |= ch->signal << PL080_CONFIG_SRC_SEL_SHIFT; } dev_dbg(&pl08x->adev->dev, "allocated physical channel %d and signal %d for xfer on %s\n", -- cgit v1.2.3 From 70b5ed6b6d72cd8b1a3d4b7b878a0dd132bec7ba Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:40:13 +0000 Subject: ARM: PL08x: move default cctl into txd structure Rather than modifying platform data while preparing a transfer, copy the cctl value into the txd structure and modify the value there. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 21 ++++++--------------- include/linux/amba/pl08x.h | 3 ++- 2 files changed, 8 insertions(+), 16 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index f0a29885cb83..6d224d41be2d 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -577,7 +577,6 @@ static inline size_t pl08x_pre_boundary(u32 addr, size_t len) static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, struct pl08x_txd *txd) { - struct pl08x_channel_data *cd = txd->cd; struct pl08x_bus_data *mbus, *sbus; size_t remainder; int num_llis = 0; @@ -595,17 +594,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, pl08x->pool_ctr++; - /* - * Initialize bus values for this transfer - * from the passed optimal values - */ - if (!cd) { - dev_err(&pl08x->adev->dev, "%s no channel data\n", __func__); - return 0; - } - - /* Get the default CCTL from the platform data */ - cctl = cd->cctl; + /* Get the default CCTL */ + cctl = txd->cctl; /* * On the PL080 we have two bus masters and we @@ -1358,11 +1348,11 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( txd->dstbus.addr = dest; /* Set platform data for m2m */ - txd->cd = &pl08x->pd->memcpy_channel; txd->ccfg |= PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; + txd->cctl = pl08x->pd->memcpy_channel.cctl; /* Both to be incremented or the code will break */ - txd->cd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR; + txd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR; txd->len = len; ret = pl08x_prep_channel_resources(plchan, txd); @@ -1415,6 +1405,8 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( * channel target address dynamically at runtime. */ txd->direction = direction; + txd->cctl = plchan->cd->cctl; + if (direction == DMA_TO_DEVICE) { txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->srcbus.addr = sgl->dma_address; @@ -1434,7 +1426,6 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( "%s direction unsupported\n", __func__); return NULL; } - txd->cd = plchan->cd; txd->len = sgl->length; ret = pl08x_prep_channel_resources(plchan, txd); diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 8e74cb1845dd..8d9083067d3d 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -110,8 +110,9 @@ struct pl08x_txd { size_t len; dma_addr_t llis_bus; void *llis_va; - struct pl08x_channel_data *cd; bool active; + /* Default cctl value for LLIs */ + u32 cctl; /* * Settings to be put into the physical channel when we * trigger this txd. Other registers are in llis_va[0]. -- cgit v1.2.3 From 1cae78f12028eebdc9107eaf168add46e66fb3f8 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:40:33 +0000 Subject: ARM: PL08x: move cctl increment and protection setup to prep_slave_sg We don't need to initialize the cctl increment and protection values in the runtime_config method - we have all the inforamtion to setup these values in prep_slave_sg(). Move their initialization there. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 6d224d41be2d..72cc971e93e5 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1148,12 +1148,10 @@ static void dma_set_runtime_config(struct dma_chan *chan, plchan->runtime_direction = config->direction; if (config->direction == DMA_TO_DEVICE) { plchan->runtime_addr = config->dst_addr; - cctl |= PL080_CONTROL_SRC_INCR; addr_width = config->dst_addr_width; maxburst = config->dst_maxburst; } else if (config->direction == DMA_FROM_DEVICE) { plchan->runtime_addr = config->src_addr; - cctl |= PL080_CONTROL_DST_INCR; addr_width = config->src_addr_width; maxburst = config->src_maxburst; } else { @@ -1197,10 +1195,6 @@ static void dma_set_runtime_config(struct dma_chan *chan, cctl |= burst_sizes[i].reg; } - /* Access the cell in privileged mode, non-bufferable, non-cacheable */ - cctl &= ~PL080_CONTROL_PROT_MASK; - cctl |= PL080_CONTROL_PROT_SYS; - /* Modify the default channel data to fit PrimeCell request */ cd->cctl = cctl; @@ -1405,10 +1399,16 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( * channel target address dynamically at runtime. */ txd->direction = direction; - txd->cctl = plchan->cd->cctl; + txd->cctl = plchan->cd->cctl & + ~(PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR | + PL080_CONTROL_PROT_MASK); + + /* Access the cell in privileged mode, non-bufferable, non-cacheable */ + txd->cctl |= PL080_CONTROL_PROT_SYS; if (direction == DMA_TO_DEVICE) { txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT; + txd->cctl |= PL080_CONTROL_SRC_INCR; txd->srcbus.addr = sgl->dma_address; if (plchan->runtime_addr) txd->dstbus.addr = plchan->runtime_addr; @@ -1416,6 +1416,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( txd->dstbus.addr = plchan->cd->addr; } else if (direction == DMA_FROM_DEVICE) { txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; + txd->cctl |= PL080_CONTROL_DST_INCR; if (plchan->runtime_addr) txd->srcbus.addr = plchan->runtime_addr; else -- cgit v1.2.3 From c7da9a56d608145cc763bcfc9329b92c4244d8d9 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:40:53 +0000 Subject: ARM: PL08x: move AHB master port selection into prep_* functions As we initialize the default cctl value in the prep_* functions along with the increment settings, we don't need to repeat the selection of the AHB ports each time we create a LLI entry. Do this in the prep_* functions once per transfer. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 47 +++++++++++++++++++++++------------------------ 1 file changed, 23 insertions(+), 24 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 72cc971e93e5..4ee0ab19b1b6 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -597,26 +597,6 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, /* Get the default CCTL */ cctl = txd->cctl; - /* - * On the PL080 we have two bus masters and we - * should select one for source and one for - * destination. We try to use AHB2 for the - * bus which does not increment (typically the - * peripheral) else we just choose something. - */ - cctl &= ~(PL080_CONTROL_DST_AHB2 | PL080_CONTROL_SRC_AHB2); - if (pl08x->vd->dualmaster) { - if (cctl & PL080_CONTROL_SRC_INCR) - /* Source increments, use AHB2 for destination */ - cctl |= PL080_CONTROL_DST_AHB2; - else if (cctl & PL080_CONTROL_DST_INCR) - /* Destination increments, use AHB2 for source */ - cctl |= PL080_CONTROL_SRC_AHB2; - else - /* Just pick something, source AHB1 dest AHB2 */ - cctl |= PL080_CONTROL_DST_AHB2; - } - /* Find maximum width of the source bus */ txd->srcbus.maxwidth = pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_SWIDTH_MASK) >> @@ -1340,14 +1320,25 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( txd->direction = DMA_NONE; txd->srcbus.addr = src; txd->dstbus.addr = dest; + txd->len = len; /* Set platform data for m2m */ txd->ccfg |= PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; - txd->cctl = pl08x->pd->memcpy_channel.cctl; + txd->cctl = pl08x->pd->memcpy_channel.cctl & + ~(PL080_CONTROL_DST_AHB2 | PL080_CONTROL_SRC_AHB2); /* Both to be incremented or the code will break */ txd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR; - txd->len = len; + + /* + * On the PL080 we have two bus masters and we should select one for + * source and one for destination. We try to use AHB2 for the bus + * which does not increment (typically the peripheral) else we just + * choose something. + */ + if (pl08x->vd->dualmaster) + /* Source increments, use AHB2 for destination */ + txd->cctl |= PL080_CONTROL_DST_AHB2; ret = pl08x_prep_channel_resources(plchan, txd); if (ret) @@ -1399,8 +1390,11 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( * channel target address dynamically at runtime. */ txd->direction = direction; + txd->len = sgl->length; + txd->cctl = plchan->cd->cctl & - ~(PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR | + ~(PL080_CONTROL_SRC_AHB2 | PL080_CONTROL_DST_AHB2 | + PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR | PL080_CONTROL_PROT_MASK); /* Access the cell in privileged mode, non-bufferable, non-cacheable */ @@ -1409,6 +1403,9 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( if (direction == DMA_TO_DEVICE) { txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->cctl |= PL080_CONTROL_SRC_INCR; + if (pl08x->vd->dualmaster) + /* Source increments, use AHB2 for destination */ + txd->cctl |= PL080_CONTROL_DST_AHB2; txd->srcbus.addr = sgl->dma_address; if (plchan->runtime_addr) txd->dstbus.addr = plchan->runtime_addr; @@ -1417,6 +1414,9 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( } else if (direction == DMA_FROM_DEVICE) { txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->cctl |= PL080_CONTROL_DST_INCR; + if (pl08x->vd->dualmaster) + /* Destination increments, use AHB2 for source */ + txd->cctl |= PL080_CONTROL_SRC_AHB2; if (plchan->runtime_addr) txd->srcbus.addr = plchan->runtime_addr; else @@ -1427,7 +1427,6 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( "%s direction unsupported\n", __func__); return NULL; } - txd->len = sgl->length; ret = pl08x_prep_channel_resources(plchan, txd); if (ret) -- cgit v1.2.3 From 30749cb4a40f02a199640011e5ab5c5f60b8482e Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:41:13 +0000 Subject: ARM: PL08x: allow AHB master port selection to be configured Platforms need to be able to control which AHB master interface is used, as each AHB master interface may be asymetric. Allow the interfaces used for fetching LLIs, memory, and each peripheral to be configured individually. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 77 ++++++++++++++++++++++++++-------------------- include/linux/amba/pl08x.h | 15 +++++++-- 2 files changed, 56 insertions(+), 36 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 4ee0ab19b1b6..986c12775b0b 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -126,6 +126,8 @@ struct pl08x_lli { * @phy_chans: array of data for the physical channels * @pool: a pool for the LLI descriptors * @pool_ctr: counter of LLIs in the pool + * @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI fetches + * @mem_buses: set to indicate memory transfers on AHB2. * @lock: a spinlock for this struct */ struct pl08x_driver_data { @@ -138,6 +140,8 @@ struct pl08x_driver_data { struct pl08x_phy_chan *phy_chans; struct dma_pool *pool; int pool_ctr; + u8 lli_buses; + u8 mem_buses; spinlock_t lock; }; @@ -526,20 +530,12 @@ static int pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, BUG_ON(num_llis >= MAX_NUM_TSFR_LLIS); - llis_va[num_llis].cctl = cctl; - llis_va[num_llis].src = txd->srcbus.addr; - llis_va[num_llis].dst = txd->dstbus.addr; - - /* - * On versions with dual masters, you can optionally AND on - * PL080_LLI_LM_AHB2 to the LLI to tell the hardware to read - * in new LLIs with that controller, but we always try to - * choose AHB1 to point into memory. The idea is to have AHB2 - * fixed on the peripheral and AHB1 messing around in the - * memory. So we don't manipulate this bit currently. - */ - + llis_va[num_llis].cctl = cctl; + llis_va[num_llis].src = txd->srcbus.addr; + llis_va[num_llis].dst = txd->dstbus.addr; llis_va[num_llis].lli = llis_bus + (num_llis + 1) * sizeof(struct pl08x_lli); + if (pl08x->lli_buses & PL08X_AHB2) + llis_va[num_llis].lli |= PL080_LLI_LM_AHB2; if (cctl & PL080_CONTROL_SRC_INCR) txd->srcbus.addr += len; @@ -639,13 +635,6 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, pl08x_choose_master_bus(&txd->srcbus, &txd->dstbus, &mbus, &sbus, cctl); - - /* - * The lowest bit of the LLI register - * is also used to indicate which master to - * use for reading the LLIs. - */ - if (txd->len < mbus->buswidth) { /* * Less than a bus width available @@ -1282,6 +1271,23 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, return 0; } +/* + * Given the source and destination available bus masks, select which + * will be routed to each port. We try to have source and destination + * on separate ports, but always respect the allowable settings. + */ +static u32 pl08x_select_bus(struct pl08x_driver_data *pl08x, u8 src, u8 dst) +{ + u32 cctl = 0; + + if (!(dst & PL08X_AHB1) || ((dst & PL08X_AHB2) && (src & PL08X_AHB1))) + cctl |= PL080_CONTROL_DST_AHB2; + if (!(src & PL08X_AHB1) || ((src & PL08X_AHB2) && !(dst & PL08X_AHB2))) + cctl |= PL080_CONTROL_SRC_AHB2; + + return cctl; +} + static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan) { struct pl08x_txd *txd = kzalloc(sizeof(struct pl08x_txd), GFP_NOWAIT); @@ -1330,15 +1336,9 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( /* Both to be incremented or the code will break */ txd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR; - /* - * On the PL080 we have two bus masters and we should select one for - * source and one for destination. We try to use AHB2 for the bus - * which does not increment (typically the peripheral) else we just - * choose something. - */ if (pl08x->vd->dualmaster) - /* Source increments, use AHB2 for destination */ - txd->cctl |= PL080_CONTROL_DST_AHB2; + txd->cctl |= pl08x_select_bus(pl08x, + pl08x->mem_buses, pl08x->mem_buses); ret = pl08x_prep_channel_resources(plchan, txd); if (ret) @@ -1359,6 +1359,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_txd *txd; + u8 src_buses, dst_buses; int ret; /* @@ -1403,31 +1404,31 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( if (direction == DMA_TO_DEVICE) { txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->cctl |= PL080_CONTROL_SRC_INCR; - if (pl08x->vd->dualmaster) - /* Source increments, use AHB2 for destination */ - txd->cctl |= PL080_CONTROL_DST_AHB2; txd->srcbus.addr = sgl->dma_address; if (plchan->runtime_addr) txd->dstbus.addr = plchan->runtime_addr; else txd->dstbus.addr = plchan->cd->addr; + src_buses = pl08x->mem_buses; + dst_buses = plchan->cd->periph_buses; } else if (direction == DMA_FROM_DEVICE) { txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->cctl |= PL080_CONTROL_DST_INCR; - if (pl08x->vd->dualmaster) - /* Destination increments, use AHB2 for source */ - txd->cctl |= PL080_CONTROL_SRC_AHB2; if (plchan->runtime_addr) txd->srcbus.addr = plchan->runtime_addr; else txd->srcbus.addr = plchan->cd->addr; txd->dstbus.addr = sgl->dma_address; + src_buses = plchan->cd->periph_buses; + dst_buses = pl08x->mem_buses; } else { dev_err(&pl08x->adev->dev, "%s direction unsupported\n", __func__); return NULL; } + txd->cctl |= pl08x_select_bus(pl08x, src_buses, dst_buses); + ret = pl08x_prep_channel_resources(plchan, txd); if (ret) return NULL; @@ -1879,6 +1880,14 @@ static int pl08x_probe(struct amba_device *adev, struct amba_id *id) pl08x->adev = adev; pl08x->vd = vd; + /* By default, AHB1 only. If dualmaster, from platform */ + pl08x->lli_buses = PL08X_AHB1; + pl08x->mem_buses = PL08X_AHB1; + if (pl08x->vd->dualmaster) { + pl08x->lli_buses = pl08x->pd->lli_buses; + pl08x->mem_buses = pl08x->pd->mem_buses; + } + /* A DMA memory pool for LLIs, align on 1-byte boundary */ pl08x->pool = dma_pool_create(DRIVER_NAME, &pl08x->adev->dev, PL08X_LLI_TSFR_SIZE, PL08X_ALIGN, 0); diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 8d9083067d3d..f858651027fd 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -25,6 +25,12 @@ struct pl08x_lli; struct pl08x_driver_data; +/* Bitmasks for selecting AHB ports for DMA transfers */ +enum { + PL08X_AHB1 = (1 << 0), + PL08X_AHB2 = (1 << 1) +}; + /** * struct pl08x_channel_data - data structure to pass info between * platform and PL08x driver regarding channel configuration @@ -51,6 +57,8 @@ struct pl08x_driver_data; * round round round) * @single: the device connected to this channel will request single * DMA transfers, not bursts. (Bursts are default.) + * @periph_buses: the device connected to this channel is accessible via + * these buses (use PL08X_AHB1 | PL08X_AHB2). */ struct pl08x_channel_data { char *bus_id; @@ -61,6 +69,7 @@ struct pl08x_channel_data { dma_addr_t addr; bool circular_buffer; bool single; + u8 periph_buses; }; /** @@ -193,8 +202,8 @@ struct pl08x_dma_chan { * less than zero, else it returns the allocated signal number * @put_signal: indicate to the platform that this physical signal is not * running any DMA transfer and multiplexing can be recycled - * @bus_bit_lli: Bit[0] of the address indicated which AHB bus master the - * LLI addresses are on 0/1 Master 1/2. + * @lli_buses: buses which LLIs can be fetched from: PL08X_AHB1 | PL08X_AHB2 + * @mem_buses: buses which memory can be accessed from: PL08X_AHB1 | PL08X_AHB2 */ struct pl08x_platform_data { struct pl08x_channel_data *slave_channels; @@ -202,6 +211,8 @@ struct pl08x_platform_data { struct pl08x_channel_data memcpy_channel; int (*get_signal)(struct pl08x_dma_chan *); void (*put_signal)(struct pl08x_dma_chan *); + u8 lli_buses; + u8 mem_buses; }; #ifdef CONFIG_AMBA_PL08X -- cgit v1.2.3 From 858c21c0f380fb9c78f47f3e372f9baadc54dffe Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:41:34 +0000 Subject: ARM: PL08x: move callback outside spinlock'd region MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Calling the callback handler with spinlocks in the tasklet held leads to deadlock when dmaengine functions are called: BUG: spinlock lockup on CPU#0, sh/417, c1870a08 Backtrace: ... [] (do_raw_spin_lock+0x0/0x154) from [] (_raw_spin_lock_irqsave+0x54/0x60) [] (_raw_spin_lock_irqsave+0x0/0x60) from [] (pl08x_prep_channel_resources+0x718/0x8b4) [] (pl08x_prep_channel_resources+0x0/0x8b4) from [] (pl08x_prep_slave_sg+0x120/0x19c) [] (pl08x_prep_slave_sg+0x0/0x19c) from [] (pl011_dma_tx_refill+0x164/0x224) [] (pl011_dma_tx_refill+0x0/0x224) from [] (pl011_dma_tx_callback+0x7c/0xc4) [] (pl011_dma_tx_callback+0x0/0xc4) from [] (pl08x_tasklet+0x60/0x368) [] (pl08x_tasklet+0x0/0x368) from [] (tasklet_action+0xa0/0x100) Dan quoted the documentation: > 2/ Completion callback routines cannot submit new operations.  This >    results in recursion in the synchronous case and spin_locks being >    acquired twice in the asynchronous case. but then followed up to say: > I should clarify, this is the async_memcpy() api requirement which is > not used outside of md/raid5. DMA drivers can and do allow new > submissions from callbacks, and the ones that do so properly move the > callback outside of the driver lock. So let's fix it by moving the callback out of the spinlocked region. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 986c12775b0b..660165dd945a 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1540,32 +1540,29 @@ static void pl08x_tasklet(unsigned long data) { struct pl08x_dma_chan *plchan = (struct pl08x_dma_chan *) data; struct pl08x_driver_data *pl08x = plchan->host; + struct pl08x_txd *txd; + dma_async_tx_callback callback = NULL; + void *callback_param = NULL; unsigned long flags; spin_lock_irqsave(&plchan->lock, flags); - if (plchan->at) { - dma_async_tx_callback callback = - plchan->at->tx.callback; - void *callback_param = - plchan->at->tx.callback_param; + txd = plchan->at; + plchan->at = NULL; - /* - * Update last completed - */ - plchan->lc = plchan->at->tx.cookie; + if (txd) { + callback = txd->tx.callback; + callback_param = txd->tx.callback_param; /* - * Callback to signal completion + * Update last completed */ - if (callback) - callback(callback_param); + plchan->lc = txd->tx.cookie; /* * Free the descriptor */ - pl08x_free_txd(pl08x, plchan->at); - plchan->at = NULL; + pl08x_free_txd(pl08x, txd); } /* * If a new descriptor is queued, set it up @@ -1616,6 +1613,10 @@ static void pl08x_tasklet(unsigned long data) } spin_unlock_irqrestore(&plchan->lock, flags); + + /* Callback to signal completion */ + if (callback) + callback(callback_param); } static irqreturn_t pl08x_irq(int irq, void *dev) -- cgit v1.2.3 From 0059005f2cbf4847551b9ad9915ffffe23aef0b9 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:41:54 +0000 Subject: ARM: PL08x: make pl08x_fill_lli_for_desc() return void We don't need pl08x_fill_lli_for_desc() to return num_llis + 1 as we know that's what it always does. We can just pass in num_llis and use post-increment in the caller. This makes the code slightly easier to read. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 30 ++++++++++++------------------ 1 file changed, 12 insertions(+), 18 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 660165dd945a..f61940434669 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -521,9 +521,8 @@ static void pl08x_choose_master_bus(struct pl08x_bus_data *src_bus, * Fills in one LLI for a certain transfer descriptor * and advance the counter */ -static int pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, - struct pl08x_txd *txd, int num_llis, int len, - u32 cctl, u32 *remainder) +static void pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, + struct pl08x_txd *txd, int num_llis, int len, u32 cctl, u32 *remainder) { struct pl08x_lli *llis_va = txd->llis_va; dma_addr_t llis_bus = txd->llis_bus; @@ -545,8 +544,6 @@ static int pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, BUG_ON(*remainder < len); *remainder -= len; - - return num_llis + 1; } /* @@ -646,8 +643,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, "less than a bus width (remain 0x%08x)\n", __func__, remainder); cctl = pl08x_cctl_bits(cctl, 1, 1, 1); - num_llis = - pl08x_fill_lli_for_desc(pl08x, txd, num_llis, 1, + pl08x_fill_lli_for_desc(pl08x, txd, num_llis++, 1, cctl, &remainder); total_bytes++; } @@ -662,8 +658,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, "(remain 0x%08x)\n", __func__, remainder); cctl = pl08x_cctl_bits(cctl, 1, 1, 1); - num_llis = pl08x_fill_lli_for_desc - (pl08x, txd, num_llis, 1, cctl, &remainder); + pl08x_fill_lli_for_desc(pl08x, txd, num_llis++, 1, + cctl, &remainder); total_bytes++; } @@ -787,9 +783,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, dev_vdbg(&pl08x->adev->dev, "%s fill lli with single lli chunk of size 0x%08zx (remainder 0x%08zx)\n", __func__, lli_len, remainder); - num_llis = pl08x_fill_lli_for_desc(pl08x, txd, - num_llis, lli_len, cctl, - &remainder); + pl08x_fill_lli_for_desc(pl08x, txd, num_llis++, + lli_len, cctl, &remainder); total_bytes += lli_len; } @@ -806,10 +801,9 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, dev_vdbg(&pl08x->adev->dev, "%s align with boundary, single byte (remain 0x%08zx)\n", __func__, remainder); - num_llis = - pl08x_fill_lli_for_desc(pl08x, - txd, num_llis, 1, - cctl, &remainder); + pl08x_fill_lli_for_desc(pl08x, txd, + num_llis++, 1, cctl, + &remainder); total_bytes++; } } @@ -823,8 +817,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, dev_vdbg(&pl08x->adev->dev, "%s align with boundary, single odd byte (remain %zu)\n", __func__, remainder); - num_llis = pl08x_fill_lli_for_desc(pl08x, txd, num_llis, - 1, cctl, &remainder); + pl08x_fill_lli_for_desc(pl08x, txd, num_llis++, 1, + cctl, &remainder); total_bytes++; } } -- cgit v1.2.3 From b61be8d728abad7fd98e62e98f22325f8f254b51 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:42:14 +0000 Subject: ARM: PL08x: ensure pl08x_pre_boundary() works for any value of addr pl08x_pre_boundary() was unsafe with addresses towards the top of memory space: boundary = ((addr >> PL08X_BOUNDARY_SHIFT) + 1) << PL08X_BOUNDARY_SHIFT; This can overflow a 32-bit number, producing zero. When it does: if (boundary < addr + len) return boundary - addr; else return len; results in (boundary - addr) returning either a large positive value. Also if addr + len overflows, this calculation also fails. We can fix this trivially as the only thing we're actually interested in is the value of the least significant PL08X_BOUNDARY_SHIFT bits: boundary_len = PL08X_BOUNDARY_SIZE - (addr & (PL08X_BOUNDARY_SIZE - 1)); gives us the number of bytes before 'addr' becomes a multiple of PL08X_BOUNDARY_SIZE. We can then just take the min() of the two calculated lengths. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index f61940434669..7c327c315878 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -547,19 +547,15 @@ static void pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, } /* - * Return number of bytes to fill to boundary, or len + * Return number of bytes to fill to boundary, or len. + * This calculation works for any value of addr. */ static inline size_t pl08x_pre_boundary(u32 addr, size_t len) { - u32 boundary; + size_t boundary_len = PL08X_BOUNDARY_SIZE - + (addr & (PL08X_BOUNDARY_SIZE - 1)); - boundary = ((addr >> PL08X_BOUNDARY_SHIFT) + 1) - << PL08X_BOUNDARY_SHIFT; - - if (boundary < addr + len) - return boundary - addr; - else - return len; + return min(boundary_len, len); } /* -- cgit v1.2.3 From d6cf7b597f7158616106068930d1c6203d9359eb Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:42:34 +0000 Subject: ARM: PL08x: use min() to calculate target_len Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 7c327c315878..91dd6bfcc30f 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -682,9 +682,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, * If enough left try to send max possible, * otherwise try to send the remainder */ - target_len = remainder; - if (remainder > max_bytes_per_lli) - target_len = max_bytes_per_lli; + target_len = min(remainder, max_bytes_per_lli); /* * Set bus lengths for incrementing buses -- cgit v1.2.3 From 5f638b4f313e345bf02700910e581bccf71212f5 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:42:55 +0000 Subject: ARM: PL08x: fix fill_bytes calculation The number of bytes we want to fill into any LLI is the minimum of: - number of bytes remaining in the transfer - number of bytes we can transfer in a single LLI - number of bytes we can transfer without overflowing the source boundary - number of bytes we can transfer without overflowing the destination boundary The minimum of the first two is already calculated (target_len). We limit the boundary calculations to this number of bytes, which will then give us the number of bytes we can place into this LLI. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 26 ++++++++++---------------- 1 file changed, 10 insertions(+), 16 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 91dd6bfcc30f..be7fa174d6c0 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -685,31 +685,25 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, target_len = min(remainder, max_bytes_per_lli); /* - * Set bus lengths for incrementing buses - * to number of bytes which fill to next memory - * boundary + * Set bus lengths for incrementing buses to the + * number of bytes which fill to next memory boundary, + * limiting on the target length calculated above. */ if (cctl & PL080_CONTROL_SRC_INCR) txd->srcbus.fill_bytes = - pl08x_pre_boundary( - txd->srcbus.addr, - remainder); + pl08x_pre_boundary(txd->srcbus.addr, + target_len); else - txd->srcbus.fill_bytes = - max_bytes_per_lli; + txd->srcbus.fill_bytes = target_len; if (cctl & PL080_CONTROL_DST_INCR) txd->dstbus.fill_bytes = - pl08x_pre_boundary( - txd->dstbus.addr, - remainder); + pl08x_pre_boundary(txd->dstbus.addr, + target_len); else - txd->dstbus.fill_bytes = - max_bytes_per_lli; + txd->dstbus.fill_bytes = target_len; - /* - * Find the nearest - */ + /* Find the nearest */ lli_len = min(txd->srcbus.fill_bytes, txd->dstbus.fill_bytes); -- cgit v1.2.3 From 542361f8e385355c68e263eba49d4306739b9220 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:43:15 +0000 Subject: ARM: PL08x: don't manipulate txd->srcbus or txd->dstbus during LLI fill Don't alter any txd->srcbus or txd->dstbus values while building the LLI list. This allows us to see the original dma_addr_t values passed in via the prep_memcpy() method. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 159 +++++++++++++++++++++++++---------------------- 1 file changed, 83 insertions(+), 76 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index be7fa174d6c0..39970c5038d6 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -481,38 +481,45 @@ static inline u32 pl08x_cctl_bits(u32 cctl, u8 srcwidth, u8 dstwidth, return retbits; } +struct pl08x_lli_build_data { + struct pl08x_txd *txd; + struct pl08x_driver_data *pl08x; + struct pl08x_bus_data srcbus; + struct pl08x_bus_data dstbus; + size_t remainder; +}; + /* * Autoselect a master bus to use for the transfer * this prefers the destination bus if both available * if fixed address on one bus the other will be chosen */ -static void pl08x_choose_master_bus(struct pl08x_bus_data *src_bus, - struct pl08x_bus_data *dst_bus, struct pl08x_bus_data **mbus, - struct pl08x_bus_data **sbus, u32 cctl) +static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd, + struct pl08x_bus_data **mbus, struct pl08x_bus_data **sbus, u32 cctl) { if (!(cctl & PL080_CONTROL_DST_INCR)) { - *mbus = src_bus; - *sbus = dst_bus; + *mbus = &bd->srcbus; + *sbus = &bd->dstbus; } else if (!(cctl & PL080_CONTROL_SRC_INCR)) { - *mbus = dst_bus; - *sbus = src_bus; + *mbus = &bd->dstbus; + *sbus = &bd->srcbus; } else { - if (dst_bus->buswidth == 4) { - *mbus = dst_bus; - *sbus = src_bus; - } else if (src_bus->buswidth == 4) { - *mbus = src_bus; - *sbus = dst_bus; - } else if (dst_bus->buswidth == 2) { - *mbus = dst_bus; - *sbus = src_bus; - } else if (src_bus->buswidth == 2) { - *mbus = src_bus; - *sbus = dst_bus; + if (bd->dstbus.buswidth == 4) { + *mbus = &bd->dstbus; + *sbus = &bd->srcbus; + } else if (bd->srcbus.buswidth == 4) { + *mbus = &bd->srcbus; + *sbus = &bd->dstbus; + } else if (bd->dstbus.buswidth == 2) { + *mbus = &bd->dstbus; + *sbus = &bd->srcbus; + } else if (bd->srcbus.buswidth == 2) { + *mbus = &bd->srcbus; + *sbus = &bd->dstbus; } else { - /* src_bus->buswidth == 1 */ - *mbus = dst_bus; - *sbus = src_bus; + /* bd->srcbus.buswidth == 1 */ + *mbus = &bd->dstbus; + *sbus = &bd->srcbus; } } } @@ -521,29 +528,29 @@ static void pl08x_choose_master_bus(struct pl08x_bus_data *src_bus, * Fills in one LLI for a certain transfer descriptor * and advance the counter */ -static void pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, - struct pl08x_txd *txd, int num_llis, int len, u32 cctl, u32 *remainder) +static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd, + int num_llis, int len, u32 cctl) { - struct pl08x_lli *llis_va = txd->llis_va; - dma_addr_t llis_bus = txd->llis_bus; + struct pl08x_lli *llis_va = bd->txd->llis_va; + dma_addr_t llis_bus = bd->txd->llis_bus; BUG_ON(num_llis >= MAX_NUM_TSFR_LLIS); llis_va[num_llis].cctl = cctl; - llis_va[num_llis].src = txd->srcbus.addr; - llis_va[num_llis].dst = txd->dstbus.addr; + llis_va[num_llis].src = bd->srcbus.addr; + llis_va[num_llis].dst = bd->dstbus.addr; llis_va[num_llis].lli = llis_bus + (num_llis + 1) * sizeof(struct pl08x_lli); - if (pl08x->lli_buses & PL08X_AHB2) + if (bd->pl08x->lli_buses & PL08X_AHB2) llis_va[num_llis].lli |= PL080_LLI_LM_AHB2; if (cctl & PL080_CONTROL_SRC_INCR) - txd->srcbus.addr += len; + bd->srcbus.addr += len; if (cctl & PL080_CONTROL_DST_INCR) - txd->dstbus.addr += len; + bd->dstbus.addr += len; - BUG_ON(*remainder < len); + BUG_ON(bd->remainder < len); - *remainder -= len; + bd->remainder -= len; } /* @@ -567,7 +574,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, struct pl08x_txd *txd) { struct pl08x_bus_data *mbus, *sbus; - size_t remainder; + struct pl08x_lli_build_data bd; int num_llis = 0; u32 cctl; size_t max_bytes_per_lli; @@ -586,38 +593,43 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, /* Get the default CCTL */ cctl = txd->cctl; + bd.txd = txd; + bd.pl08x = pl08x; + bd.srcbus.addr = txd->srcbus.addr; + bd.dstbus.addr = txd->dstbus.addr; + /* Find maximum width of the source bus */ - txd->srcbus.maxwidth = + bd.srcbus.maxwidth = pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_SWIDTH_MASK) >> PL080_CONTROL_SWIDTH_SHIFT); /* Find maximum width of the destination bus */ - txd->dstbus.maxwidth = + bd.dstbus.maxwidth = pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_DWIDTH_MASK) >> PL080_CONTROL_DWIDTH_SHIFT); /* Set up the bus widths to the maximum */ - txd->srcbus.buswidth = txd->srcbus.maxwidth; - txd->dstbus.buswidth = txd->dstbus.maxwidth; + bd.srcbus.buswidth = bd.srcbus.maxwidth; + bd.dstbus.buswidth = bd.dstbus.maxwidth; dev_vdbg(&pl08x->adev->dev, "%s source bus is %d bytes wide, dest bus is %d bytes wide\n", - __func__, txd->srcbus.buswidth, txd->dstbus.buswidth); + __func__, bd.srcbus.buswidth, bd.dstbus.buswidth); /* * Bytes transferred == tsize * MIN(buswidths), not max(buswidths) */ - max_bytes_per_lli = min(txd->srcbus.buswidth, txd->dstbus.buswidth) * + max_bytes_per_lli = min(bd.srcbus.buswidth, bd.dstbus.buswidth) * PL080_CONTROL_TRANSFER_SIZE_MASK; dev_vdbg(&pl08x->adev->dev, "%s max bytes per lli = %zu\n", __func__, max_bytes_per_lli); /* We need to count this down to zero */ - remainder = txd->len; + bd.remainder = txd->len; dev_vdbg(&pl08x->adev->dev, "%s remainder = %zu\n", - __func__, remainder); + __func__, bd.remainder); /* * Choose bus to align to @@ -625,22 +637,20 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, * - if fixed address on one bus chooses other * - modifies cctl to choose an appropriate master */ - pl08x_choose_master_bus(&txd->srcbus, &txd->dstbus, - &mbus, &sbus, cctl); + pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl); if (txd->len < mbus->buswidth) { /* * Less than a bus width available * - send as single bytes */ - while (remainder) { + while (bd.remainder) { dev_vdbg(&pl08x->adev->dev, "%s single byte LLIs for a transfer of " "less than a bus width (remain 0x%08x)\n", - __func__, remainder); + __func__, bd.remainder); cctl = pl08x_cctl_bits(cctl, 1, 1, 1); - pl08x_fill_lli_for_desc(pl08x, txd, num_llis++, 1, - cctl, &remainder); + pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl); total_bytes++; } } else { @@ -652,10 +662,9 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, dev_vdbg(&pl08x->adev->dev, "%s adjustment lli for less than bus width " "(remain 0x%08x)\n", - __func__, remainder); + __func__, bd.remainder); cctl = pl08x_cctl_bits(cctl, 1, 1, 1); - pl08x_fill_lli_for_desc(pl08x, txd, num_llis++, 1, - cctl, &remainder); + pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl); total_bytes++; } @@ -675,14 +684,14 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, * Make largest possible LLIs until less than one bus * width left */ - while (remainder > (mbus->buswidth - 1)) { + while (bd.remainder > (mbus->buswidth - 1)) { size_t lli_len, target_len, tsize, odd_bytes; /* * If enough left try to send max possible, * otherwise try to send the remainder */ - target_len = min(remainder, max_bytes_per_lli); + target_len = min(bd.remainder, max_bytes_per_lli); /* * Set bus lengths for incrementing buses to the @@ -690,24 +699,24 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, * limiting on the target length calculated above. */ if (cctl & PL080_CONTROL_SRC_INCR) - txd->srcbus.fill_bytes = - pl08x_pre_boundary(txd->srcbus.addr, + bd.srcbus.fill_bytes = + pl08x_pre_boundary(bd.srcbus.addr, target_len); else - txd->srcbus.fill_bytes = target_len; + bd.srcbus.fill_bytes = target_len; if (cctl & PL080_CONTROL_DST_INCR) - txd->dstbus.fill_bytes = - pl08x_pre_boundary(txd->dstbus.addr, + bd.dstbus.fill_bytes = + pl08x_pre_boundary(bd.dstbus.addr, target_len); else - txd->dstbus.fill_bytes = target_len; + bd.dstbus.fill_bytes = target_len; /* Find the nearest */ - lli_len = min(txd->srcbus.fill_bytes, - txd->dstbus.fill_bytes); + lli_len = min(bd.srcbus.fill_bytes, + bd.dstbus.fill_bytes); - BUG_ON(lli_len > remainder); + BUG_ON(lli_len > bd.remainder); if (lli_len <= 0) { dev_err(&pl08x->adev->dev, @@ -764,15 +773,15 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, } cctl = pl08x_cctl_bits(cctl, - txd->srcbus.buswidth, - txd->dstbus.buswidth, + bd.srcbus.buswidth, + bd.dstbus.buswidth, tsize); dev_vdbg(&pl08x->adev->dev, "%s fill lli with single lli chunk of size 0x%08zx (remainder 0x%08zx)\n", - __func__, lli_len, remainder); - pl08x_fill_lli_for_desc(pl08x, txd, num_llis++, - lli_len, cctl, &remainder); + __func__, lli_len, bd.remainder); + pl08x_fill_lli_for_desc(&bd, num_llis++, + lli_len, cctl); total_bytes += lli_len; } @@ -784,14 +793,13 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, */ int j; for (j = 0; (j < mbus->buswidth) - && (remainder); j++) { + && (bd.remainder); j++) { cctl = pl08x_cctl_bits(cctl, 1, 1, 1); dev_vdbg(&pl08x->adev->dev, "%s align with boundary, single byte (remain 0x%08zx)\n", - __func__, remainder); - pl08x_fill_lli_for_desc(pl08x, txd, - num_llis++, 1, cctl, - &remainder); + __func__, bd.remainder); + pl08x_fill_lli_for_desc(&bd, + num_llis++, 1, cctl); total_bytes++; } } @@ -800,13 +808,12 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, /* * Send any odd bytes */ - while (remainder) { + while (bd.remainder) { cctl = pl08x_cctl_bits(cctl, 1, 1, 1); dev_vdbg(&pl08x->adev->dev, "%s align with boundary, single odd byte (remain %zu)\n", - __func__, remainder); - pl08x_fill_lli_for_desc(pl08x, txd, num_llis++, 1, - cctl, &remainder); + __func__, bd.remainder); + pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl); total_bytes++; } } -- cgit v1.2.3 From d7244e9a27a3da27d62aabf560ee828d7991493e Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:43:35 +0000 Subject: ARM: PL08x: shrink srcbus/dstbus in txd structure We only need to store the dma address. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 20 ++++++++++---------- include/linux/amba/pl08x.h | 4 ++-- 2 files changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 39970c5038d6..8d8d33ce5684 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -595,8 +595,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, bd.txd = txd; bd.pl08x = pl08x; - bd.srcbus.addr = txd->srcbus.addr; - bd.dstbus.addr = txd->dstbus.addr; + bd.srcbus.addr = txd->src_addr; + bd.dstbus.addr = txd->dst_addr; /* Find maximum width of the source bus */ bd.srcbus.maxwidth = @@ -1313,8 +1313,8 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( } txd->direction = DMA_NONE; - txd->srcbus.addr = src; - txd->dstbus.addr = dest; + txd->src_addr = src; + txd->dst_addr = dest; txd->len = len; /* Set platform data for m2m */ @@ -1393,21 +1393,21 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( if (direction == DMA_TO_DEVICE) { txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->cctl |= PL080_CONTROL_SRC_INCR; - txd->srcbus.addr = sgl->dma_address; + txd->src_addr = sgl->dma_address; if (plchan->runtime_addr) - txd->dstbus.addr = plchan->runtime_addr; + txd->dst_addr = plchan->runtime_addr; else - txd->dstbus.addr = plchan->cd->addr; + txd->dst_addr = plchan->cd->addr; src_buses = pl08x->mem_buses; dst_buses = plchan->cd->periph_buses; } else if (direction == DMA_FROM_DEVICE) { txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->cctl |= PL080_CONTROL_DST_INCR; if (plchan->runtime_addr) - txd->srcbus.addr = plchan->runtime_addr; + txd->src_addr = plchan->runtime_addr; else - txd->srcbus.addr = plchan->cd->addr; - txd->dstbus.addr = sgl->dma_address; + txd->src_addr = plchan->cd->addr; + txd->dst_addr = sgl->dma_address; src_buses = plchan->cd->periph_buses; dst_buses = pl08x->mem_buses; } else { diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index f858651027fd..4e9e71860e1c 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -114,8 +114,8 @@ struct pl08x_txd { struct dma_async_tx_descriptor tx; struct list_head node; enum dma_data_direction direction; - struct pl08x_bus_data srcbus; - struct pl08x_bus_data dstbus; + dma_addr_t src_addr; + dma_addr_t dst_addr; size_t len; dma_addr_t llis_bus; void *llis_va; -- cgit v1.2.3 From c04287948ec8308fceedda980373bc7d53620255 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:43:56 +0000 Subject: ARM: PL08x: store prep_* flags in async_tx structure Like other DMA engine drivers do, store the passed flags into the async_tx structure, so they can be checked when the operation completes. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 8d8d33ce5684..00058e30a9c3 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1277,12 +1277,14 @@ static u32 pl08x_select_bus(struct pl08x_driver_data *pl08x, u8 src, u8 dst) return cctl; } -static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan) +static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan, + unsigned long flags) { struct pl08x_txd *txd = kzalloc(sizeof(struct pl08x_txd), GFP_NOWAIT); if (txd) { dma_async_tx_descriptor_init(&txd->tx, &plchan->chan); + txd->tx.flags = flags; txd->tx.tx_submit = pl08x_tx_submit; INIT_LIST_HEAD(&txd->node); @@ -1305,7 +1307,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( struct pl08x_txd *txd; int ret; - txd = pl08x_get_txd(plchan); + txd = pl08x_get_txd(plchan, flags); if (!txd) { dev_err(&pl08x->adev->dev, "%s no memory for descriptor\n", __func__); @@ -1363,7 +1365,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n", __func__, sgl->length, plchan->name); - txd = pl08x_get_txd(plchan); + txd = pl08x_get_txd(plchan, flags); if (!txd) { dev_err(&pl08x->adev->dev, "%s no txd\n", __func__); return NULL; -- cgit v1.2.3 From 3d992e1a6f8465db3921ef75bfc490fbd2f40cd3 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:44:16 +0000 Subject: ARM: PL08x: implement unmapping of memcpy buffers The DMA engine API requires DMA engine implementations to unmap buffers passed into the non-slave DMA methods unless the relevant completion flag is set. We aren't doing this, so implement this facility. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 52 ++++++++++++++++++++++++++++++++++++------------ 1 file changed, 39 insertions(+), 13 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 00058e30a9c3..fb469dedcdf3 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1527,13 +1527,33 @@ static void pl08x_ensure_on(struct pl08x_driver_data *pl08x) writel(val, pl08x->base + PL080_CONFIG); } +static void pl08x_unmap_buffers(struct pl08x_txd *txd) +{ + struct device *dev = txd->tx.chan->device->dev; + + if (!(txd->tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) { + if (txd->tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE) + dma_unmap_single(dev, txd->src_addr, txd->len, + DMA_TO_DEVICE); + else + dma_unmap_page(dev, txd->src_addr, txd->len, + DMA_TO_DEVICE); + } + if (!(txd->tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) { + if (txd->tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE) + dma_unmap_single(dev, txd->dst_addr, txd->len, + DMA_FROM_DEVICE); + else + dma_unmap_page(dev, txd->dst_addr, txd->len, + DMA_FROM_DEVICE); + } +} + static void pl08x_tasklet(unsigned long data) { struct pl08x_dma_chan *plchan = (struct pl08x_dma_chan *) data; struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_txd *txd; - dma_async_tx_callback callback = NULL; - void *callback_param = NULL; unsigned long flags; spin_lock_irqsave(&plchan->lock, flags); @@ -1542,18 +1562,10 @@ static void pl08x_tasklet(unsigned long data) plchan->at = NULL; if (txd) { - callback = txd->tx.callback; - callback_param = txd->tx.callback_param; - /* * Update last completed */ plchan->lc = txd->tx.cookie; - - /* - * Free the descriptor - */ - pl08x_free_txd(pl08x, txd); } /* * If a new descriptor is queued, set it up @@ -1605,9 +1617,23 @@ static void pl08x_tasklet(unsigned long data) spin_unlock_irqrestore(&plchan->lock, flags); - /* Callback to signal completion */ - if (callback) - callback(callback_param); + if (txd) { + dma_async_tx_callback callback = txd->tx.callback; + void *callback_param = txd->tx.callback_param; + + /* Don't try to unmap buffers on slave channels */ + if (!plchan->slave) + pl08x_unmap_buffers(txd); + + /* Free the descriptor */ + spin_lock_irqsave(&plchan->lock, flags); + pl08x_free_txd(pl08x, txd); + spin_unlock_irqrestore(&plchan->lock, flags); + + /* Callback to signal completion */ + if (callback) + callback(callback_param); + } } static irqreturn_t pl08x_irq(int irq, void *dev) -- cgit v1.2.3 From 15c17232fbd1f7687c740c3c26f9e7f337bd9e36 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:44:36 +0000 Subject: ARM: PL08x: rename 'desc_list' as 'pend_list' This 'desc_list' is actually a list of pending descriptors, so name it after its function (pending list) rather than what it contains (descriptors). Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 20 ++++++++++---------- include/linux/amba/pl08x.h | 4 ++-- 2 files changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index fb469dedcdf3..433b9e747f75 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -348,9 +348,9 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) } /* Sum up all queued transactions */ - if (!list_empty(&plchan->desc_list)) { + if (!list_empty(&plchan->pend_list)) { struct pl08x_txd *txdi; - list_for_each_entry(txdi, &plchan->desc_list, node) { + list_for_each_entry(txdi, &plchan->pend_list, node) { bytes += txdi->len; } } @@ -880,9 +880,9 @@ static void pl08x_free_txd_list(struct pl08x_driver_data *pl08x, struct pl08x_txd *txdi = NULL; struct pl08x_txd *next; - if (!list_empty(&plchan->desc_list)) { + if (!list_empty(&plchan->pend_list)) { list_for_each_entry_safe(txdi, - next, &plchan->desc_list, node) { + next, &plchan->pend_list, node) { list_del(&txdi->node); pl08x_free_txd(pl08x, txdi); } @@ -1183,10 +1183,10 @@ static void pl08x_issue_pending(struct dma_chan *chan) } /* Take the first element in the queue and execute it */ - if (!list_empty(&plchan->desc_list)) { + if (!list_empty(&plchan->pend_list)) { struct pl08x_txd *next; - next = list_first_entry(&plchan->desc_list, + next = list_first_entry(&plchan->pend_list, struct pl08x_txd, node); list_del(&next->node); @@ -1213,7 +1213,7 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, spin_lock_irqsave(&plchan->lock, plchan->lockflags); - list_add_tail(&txd->node, &plchan->desc_list); + list_add_tail(&txd->node, &plchan->pend_list); /* * See if we already have a physical channel allocated, @@ -1571,10 +1571,10 @@ static void pl08x_tasklet(unsigned long data) * If a new descriptor is queued, set it up * plchan->at is NULL here */ - if (!list_empty(&plchan->desc_list)) { + if (!list_empty(&plchan->pend_list)) { struct pl08x_txd *next; - next = list_first_entry(&plchan->desc_list, + next = list_first_entry(&plchan->pend_list, struct pl08x_txd, node); list_del(&next->node); @@ -1736,7 +1736,7 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, chan->lc = 0; spin_lock_init(&chan->lock); - INIT_LIST_HEAD(&chan->desc_list); + INIT_LIST_HEAD(&chan->pend_list); tasklet_init(&chan->tasklet, pl08x_tasklet, (unsigned long) chan); diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 4e9e71860e1c..08a9024e2d2f 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -158,7 +158,7 @@ enum pl08x_dma_chan_state { * @runtime_direction: current direction of this channel according to * runtime config * @lc: last completed transaction on this channel - * @desc_list: queued transactions pending on this channel + * @pend_list: queued transactions pending on this channel * @at: active transaction on this channel * @lockflags: sometimes we let a lock last between two function calls, * especially prep/submit, and then we need to store the IRQ flags @@ -179,7 +179,7 @@ struct pl08x_dma_chan { dma_addr_t runtime_addr; enum dma_data_direction runtime_direction; dma_cookie_t lc; - struct list_head desc_list; + struct list_head pend_list; struct pl08x_txd *at; unsigned long lockflags; spinlock_t lock; -- cgit v1.2.3 From 501e67e82dee68d0a594ec0549f3d6a2943c91f5 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:44:57 +0000 Subject: ARM: PL08x: put txd's on the pending list in pl08x_tx_submit() Don't place TXDs on the pending list when they're prepared - place them on the list when they're ready to be submitted. Also, only place memcpy requests in the wait state when they're submitted and don't have a physical channel associated. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 46 ++++++++++++++++++++++++++++++++-------------- 1 file changed, 32 insertions(+), 14 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 433b9e747f75..650e2bbc7aad 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -173,6 +173,11 @@ static inline struct pl08x_dma_chan *to_pl08x_chan(struct dma_chan *chan) return container_of(chan, struct pl08x_dma_chan, chan); } +static inline struct pl08x_txd *to_pl08x_txd(struct dma_async_tx_descriptor *tx) +{ + return container_of(tx, struct pl08x_txd, tx); +} + /* * Physical channel handling */ @@ -974,11 +979,27 @@ static void release_phy_channel(struct pl08x_dma_chan *plchan) static dma_cookie_t pl08x_tx_submit(struct dma_async_tx_descriptor *tx) { struct pl08x_dma_chan *plchan = to_pl08x_chan(tx->chan); + struct pl08x_txd *txd = to_pl08x_txd(tx); plchan->chan.cookie += 1; if (plchan->chan.cookie < 0) plchan->chan.cookie = 1; tx->cookie = plchan->chan.cookie; + + /* Put this onto the pending list */ + list_add_tail(&txd->node, &plchan->pend_list); + + /* + * If there was no physical channel available for this memcpy, + * stack the request up and indicate that the channel is waiting + * for a free physical channel. + */ + if (!plchan->slave && !plchan->phychan) { + /* Do this memcpy whenever there is a channel ready */ + plchan->state = PL08X_CHAN_WAITING; + plchan->waiting = txd; + } + /* This unlock follows the lock in the prep() function */ spin_unlock_irqrestore(&plchan->lock, plchan->lockflags); @@ -1213,8 +1234,6 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, spin_lock_irqsave(&plchan->lock, plchan->lockflags); - list_add_tail(&txd->node, &plchan->pend_list); - /* * See if we already have a physical channel allocated, * else this is the time to try to get one. @@ -1222,24 +1241,23 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, ret = prep_phy_channel(plchan, txd); if (ret) { /* - * No physical channel available, we will - * stack up the memcpy channels until there is a channel - * available to handle it whereas slave transfers may - * have been denied due to platform channel muxing restrictions - * and since there is no guarantee that this will ever be - * resolved, and since the signal must be acquired AFTER - * acquiring the physical channel, we will let them be NACK:ed - * with -EBUSY here. The drivers can alway retry the prep() - * call if they are eager on doing this using DMA. + * No physical channel was available. + * + * memcpy transfers can be sorted out at submission time. + * + * Slave transfers may have been denied due to platform + * channel muxing restrictions. Since there is no guarantee + * that this will ever be resolved, and the signal must be + * acquired AFTER acquiring the physical channel, we will let + * them be NACK:ed with -EBUSY here. The drivers can retry + * the prep() call if they are eager on doing this using DMA. */ if (plchan->slave) { pl08x_free_txd_list(pl08x, plchan); + pl08x_free_txd(pl08x, txd); spin_unlock_irqrestore(&plchan->lock, plchan->lockflags); return -EBUSY; } - /* Do this memcpy whenever there is a channel ready */ - plchan->state = PL08X_CHAN_WAITING; - plchan->waiting = txd; } else /* * Else we're all set, paused and ready to roll, -- cgit v1.2.3 From 8087aacda040bdbf84940712d132ce80c30b9d5d Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:45:17 +0000 Subject: ARM: PL08x: introduce 'phychan_hold' to hold on to physical channels Introduce 'phychan_hold' to hold on to physical DMA channels while we're preparing a new descriptor for it. This will be incremented when we allocate a physical channel and set the MUX registers during the preparation of the TXD, and will only be decremented when the TXD is submitted. This prevents the physical channel being given up before the new TXD is placed on the queue. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 11 +++++++++++ include/linux/amba/pl08x.h | 3 +++ 2 files changed, 14 insertions(+) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 650e2bbc7aad..bf6f7d02c9f6 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -959,6 +959,7 @@ static int prep_phy_channel(struct pl08x_dma_chan *plchan, ch->signal, plchan->name); + plchan->phychan_hold++; plchan->phychan = ch; return 0; @@ -998,6 +999,8 @@ static dma_cookie_t pl08x_tx_submit(struct dma_async_tx_descriptor *tx) /* Do this memcpy whenever there is a channel ready */ plchan->state = PL08X_CHAN_WAITING; plchan->waiting = txd; + } else { + plchan->phychan_hold--; } /* This unlock follows the lock in the prep() function */ @@ -1585,6 +1588,7 @@ static void pl08x_tasklet(unsigned long data) */ plchan->lc = txd->tx.cookie; } + /* * If a new descriptor is queued, set it up * plchan->at is NULL here @@ -1598,6 +1602,12 @@ static void pl08x_tasklet(unsigned long data) list_del(&next->node); pl08x_start_txd(plchan, next); + } else if (plchan->phychan_hold) { + /* + * This channel is still in use - we have a new txd being + * prepared and will soon be queued. Don't give up the + * physical channel. + */ } else { struct pl08x_dma_chan *waiting = NULL; @@ -1625,6 +1635,7 @@ static void pl08x_tasklet(unsigned long data) ret = prep_phy_channel(waiting, waiting->waiting); BUG_ON(ret); + waiting->phychan_hold--; waiting->state = PL08X_CHAN_RUNNING; waiting->waiting = NULL; pl08x_issue_pending(&waiting->chan); diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 08a9024e2d2f..95b76ea1829f 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -151,6 +151,8 @@ enum pl08x_dma_chan_state { * struct pl08x_dma_chan - this structure wraps a DMA ENGINE channel * @chan: wrappped abstract channel * @phychan: the physical channel utilized by this channel, if there is one + * @phychan_hold: if non-zero, hold on to the physical channel even if we + * have no pending entries * @tasklet: tasklet scheduled by the IRQ to handle actual work etc * @name: name of channel * @cd: channel platform data @@ -173,6 +175,7 @@ enum pl08x_dma_chan_state { struct pl08x_dma_chan { struct dma_chan chan; struct pl08x_phy_chan *phychan; + int phychan_hold; struct tasklet_struct tasklet; char *name; struct pl08x_channel_data *cd; -- cgit v1.2.3 From c370e594efe2993620d24d41a78f325102e99d1c Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:45:37 +0000 Subject: ARM: PL08x: fix locking between prepare function and submit function The PL08x driver holds on to the channel lock with interrupts disabled between the prepare and the subsequent submit API functions. This means that the locking state when the prepare function returns is dependent on whether it suceeeds or not. It did this to ensure that the physical channel wasn't released, and as it used to add the descriptor onto the pending list at prepare time rather than submit time. Now that we have reorganized the code to remove those reasons, we can now safely release the spinlock at the end of preparation and reacquire it in our submit function. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 28 +++++++++------------------- include/linux/amba/pl08x.h | 4 ---- 2 files changed, 9 insertions(+), 23 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index bf6f7d02c9f6..1c9f712520d6 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -981,6 +981,9 @@ static dma_cookie_t pl08x_tx_submit(struct dma_async_tx_descriptor *tx) { struct pl08x_dma_chan *plchan = to_pl08x_chan(tx->chan); struct pl08x_txd *txd = to_pl08x_txd(tx); + unsigned long flags; + + spin_lock_irqsave(&plchan->lock, flags); plchan->chan.cookie += 1; if (plchan->chan.cookie < 0) @@ -1003,8 +1006,7 @@ static dma_cookie_t pl08x_tx_submit(struct dma_async_tx_descriptor *tx) plchan->phychan_hold--; } - /* This unlock follows the lock in the prep() function */ - spin_unlock_irqrestore(&plchan->lock, plchan->lockflags); + spin_unlock_irqrestore(&plchan->lock, flags); return tx->cookie; } @@ -1225,9 +1227,9 @@ static void pl08x_issue_pending(struct dma_chan *chan) static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, struct pl08x_txd *txd) { - int num_llis; struct pl08x_driver_data *pl08x = plchan->host; - int ret; + unsigned long flags; + int num_llis, ret; num_llis = pl08x_fill_llis_for_desc(pl08x, txd); if (!num_llis) { @@ -1235,7 +1237,7 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, return -EINVAL; } - spin_lock_irqsave(&plchan->lock, plchan->lockflags); + spin_lock_irqsave(&plchan->lock, flags); /* * See if we already have a physical channel allocated, @@ -1258,7 +1260,7 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, if (plchan->slave) { pl08x_free_txd_list(pl08x, plchan); pl08x_free_txd(pl08x, txd); - spin_unlock_irqrestore(&plchan->lock, plchan->lockflags); + spin_unlock_irqrestore(&plchan->lock, flags); return -EBUSY; } } else @@ -1272,11 +1274,7 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, if (plchan->state == PL08X_CHAN_IDLE) plchan->state = PL08X_CHAN_PAUSED; - /* - * Notice that we leave plchan->lock locked on purpose: - * it will be unlocked in the subsequent tx_submit() - * call. This is a consequence of the current API. - */ + spin_unlock_irqrestore(&plchan->lock, flags); return 0; } @@ -1355,10 +1353,6 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( ret = pl08x_prep_channel_resources(plchan, txd); if (ret) return NULL; - /* - * NB: the channel lock is held at this point so tx_submit() - * must be called in direct succession. - */ return &txd->tx; } @@ -1444,10 +1438,6 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( ret = pl08x_prep_channel_resources(plchan, txd); if (ret) return NULL; - /* - * NB: the channel lock is held at this point so tx_submit() - * must be called in direct succession. - */ return &txd->tx; } diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 95b76ea1829f..933b4ed12be5 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -162,9 +162,6 @@ enum pl08x_dma_chan_state { * @lc: last completed transaction on this channel * @pend_list: queued transactions pending on this channel * @at: active transaction on this channel - * @lockflags: sometimes we let a lock last between two function calls, - * especially prep/submit, and then we need to store the IRQ flags - * in the channel state, here * @lock: a lock for this channel data * @host: a pointer to the host (internal use) * @state: whether the channel is idle, paused, running etc @@ -184,7 +181,6 @@ struct pl08x_dma_chan { dma_cookie_t lc; struct list_head pend_list; struct pl08x_txd *at; - unsigned long lockflags; spinlock_t lock; struct pl08x_driver_data *host; enum pl08x_dma_chan_state state; -- cgit v1.2.3 From f0fd944625b6e406dc273b8dffa16e0728c973e6 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:45:57 +0000 Subject: ARM: PL08x: allow dma_set_runtime_config() to return errors There are cases in dma_set_runtime_config() where we fail to perform the requested action - and we just issue a KERN_ERR message in that case. We have the facility to return an error to the caller, so that is what we should do. When we encounter an error due to invalid parameters, we should not modify driver state. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 1c9f712520d6..c7f7b82f6155 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1117,13 +1117,14 @@ static const struct burst_table burst_sizes[] = { }, }; -static void dma_set_runtime_config(struct dma_chan *chan, - struct dma_slave_config *config) +static int dma_set_runtime_config(struct dma_chan *chan, + struct dma_slave_config *config) { struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_channel_data *cd = plchan->cd; enum dma_slave_buswidth addr_width; + dma_addr_t addr; u32 maxburst; u32 cctl = 0; int i; @@ -1131,17 +1132,17 @@ static void dma_set_runtime_config(struct dma_chan *chan, /* Transfer direction */ plchan->runtime_direction = config->direction; if (config->direction == DMA_TO_DEVICE) { - plchan->runtime_addr = config->dst_addr; + addr = config->dst_addr; addr_width = config->dst_addr_width; maxburst = config->dst_maxburst; } else if (config->direction == DMA_FROM_DEVICE) { - plchan->runtime_addr = config->src_addr; + addr = config->src_addr; addr_width = config->src_addr_width; maxburst = config->src_maxburst; } else { dev_err(&pl08x->adev->dev, "bad runtime_config: alien transfer direction\n"); - return; + return -EINVAL; } switch (addr_width) { @@ -1160,7 +1161,7 @@ static void dma_set_runtime_config(struct dma_chan *chan, default: dev_err(&pl08x->adev->dev, "bad runtime_config: alien address width\n"); - return; + return -EINVAL; } /* @@ -1179,6 +1180,8 @@ static void dma_set_runtime_config(struct dma_chan *chan, cctl |= burst_sizes[i].reg; } + plchan->runtime_addr = addr; + /* Modify the default channel data to fit PrimeCell request */ cd->cctl = cctl; @@ -1190,6 +1193,8 @@ static void dma_set_runtime_config(struct dma_chan *chan, addr_width, maxburst, cctl); + + return 0; } /* @@ -1452,10 +1457,8 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, /* Controls applicable to inactive channels */ if (cmd == DMA_SLAVE_CONFIG) { - dma_set_runtime_config(chan, - (struct dma_slave_config *) - arg); - return 0; + return dma_set_runtime_config(chan, + (struct dma_slave_config *)arg); } /* -- cgit v1.2.3 From b7f758659265c173380b792862aaad1c23c0e004 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:46:17 +0000 Subject: ARM: PL08x: prevent dma_set_runtime_config() reconfiguring memcpy channels Prevent dma_set_runtime_config() being used to alter the configuration supplied by the platform for memcpy channel configuration. No one should be trying to change this configuration. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index c7f7b82f6155..bebc678ed4fc 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1129,6 +1129,9 @@ static int dma_set_runtime_config(struct dma_chan *chan, u32 cctl = 0; int i; + if (!plchan->slave) + return -EINVAL; + /* Transfer direction */ plchan->runtime_direction = config->direction; if (config->direction == DMA_TO_DEVICE) { -- cgit v1.2.3 From 2cdf2455a660ea860272ef3f833f0e5c4cc80205 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Wed, 5 Jan 2011 17:43:52 +0900 Subject: pch_dma: support new device ML7213 IOH Support new device OKI SEMICONDUCTOR's ML7213 IOH(Input/Output Hub) which is for IVI(In-Vehicle Infotainment) use. The ML7213 is companion chip for Intel Atom E6xx series. The ML7213 is completely compatible for Intel EG20T PCH. Signed-off-by: Tomoya MORINAGA Signed-off-by: Dan Williams --- drivers/dma/Kconfig | 9 +++++++-- drivers/dma/pch_dma.c | 19 ++++++++++++++----- 2 files changed, 21 insertions(+), 7 deletions(-) diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 6ee23592700a..1b61d3aa2962 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -200,11 +200,16 @@ config PL330_DMA platform_data for a dma-pl330 device. config PCH_DMA - tristate "Topcliff (Intel EG20T) PCH DMA support" + tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7213 IOH DMA support" depends on PCI && X86 select DMA_ENGINE help - Enable support for the Topcliff (Intel EG20T) PCH DMA engine. + Enable support for Intel EG20T PCH DMA engine. + + This driver also can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/ + Output Hub) which is for IVI(In-Vehicle Infotainment) use. + ML7213 is companion chip for Intel Atom E6xx series. + ML7213 is completely compatible for Intel EG20T PCH. config IMX_SDMA tristate "i.MX SDMA support" diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c index c064c89420d0..1c38418ae61f 100644 --- a/drivers/dma/pch_dma.c +++ b/drivers/dma/pch_dma.c @@ -1,6 +1,7 @@ /* * Topcliff PCH DMA controller driver * Copyright (c) 2010 Intel Corporation + * Copyright (C) 2011 OKI SEMICONDUCTOR CO., LTD. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -921,12 +922,19 @@ static void __devexit pch_dma_remove(struct pci_dev *pdev) } /* PCI Device ID of DMA device */ -#define PCI_DEVICE_ID_PCH_DMA_8CH 0x8810 -#define PCI_DEVICE_ID_PCH_DMA_4CH 0x8815 +#define PCI_VENDOR_ID_ROHM 0x10DB +#define PCI_DEVICE_ID_EG20T_PCH_DMA_8CH 0x8810 +#define PCI_DEVICE_ID_EG20T_PCH_DMA_4CH 0x8815 +#define PCI_DEVICE_ID_ML7213_DMA1_8CH 0x8026 +#define PCI_DEVICE_ID_ML7213_DMA2_8CH 0x802B +#define PCI_DEVICE_ID_ML7213_DMA3_4CH 0x8034 static const struct pci_device_id pch_dma_id_table[] = { - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_DMA_8CH), 8 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_DMA_4CH), 4 }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_EG20T_PCH_DMA_8CH), 8 }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_EG20T_PCH_DMA_4CH), 4 }, + { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA1_8CH), 8}, /* UART Video */ + { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA2_8CH), 8}, /* PCMIF SPI */ + { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA3_4CH), 4}, /* FPGA */ { 0, }, }; @@ -954,6 +962,7 @@ static void __exit pch_dma_exit(void) module_init(pch_dma_init); module_exit(pch_dma_exit); -MODULE_DESCRIPTION("Topcliff PCH DMA controller driver"); +MODULE_DESCRIPTION("Intel EG20T PCH / OKI SEMICONDUCTOR ML7213 IOH " + "DMA controller driver"); MODULE_AUTHOR("Yong Wang "); MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From 0f70e8cea3ac6a765289811c590a16934bf47711 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 15 Dec 2010 18:50:16 +0100 Subject: dmaengine: at_hdmac: use dma_address to program DMA hardware In atc_prep_slave_sg() function we use dma_address field of scatterlist with sg_dma_address() macro instead of sg_phys(). DMA address is already computed by dma_map_sg() or another mapping function in calling driver. Signed-off-by: Nicolas Ferre Signed-off-by: Dan Williams --- drivers/dma/at_hdmac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index a0f3e6a06e06..6eea8883ecf3 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -670,7 +670,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, if (!desc) goto err_desc_get; - mem = sg_phys(sg); + mem = sg_dma_address(sg); len = sg_dma_len(sg); mem_width = 2; if (unlikely(mem & 3 || len & 3)) @@ -712,7 +712,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, if (!desc) goto err_desc_get; - mem = sg_phys(sg); + mem = sg_dma_address(sg); len = sg_dma_len(sg); mem_width = 2; if (unlikely(mem & 3 || len & 3)) -- cgit v1.2.3 From ebcf9b80f9657f44fcb60ee17abe14eadebf3386 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 12 Jan 2011 15:39:06 +0100 Subject: dmaengine: at_hdmac: trivial add precision to unmapping comment Signed-off-by: Nicolas Ferre Signed-off-by: Dan Williams --- drivers/dma/at_hdmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 6eea8883ecf3..73a470b4809b 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -253,7 +253,7 @@ atc_chain_complete(struct at_dma_chan *atchan, struct at_desc *desc) /* move myself to free_list */ list_move(&desc->desc_node, &atchan->free_list); - /* unmap dma addresses */ + /* unmap dma addresses (not on slave channels) */ if (!atchan->chan_common.private) { struct device *parent = chan2parent(&atchan->chan_common); if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP)) { -- cgit v1.2.3 From 58344f25cf5f3453bfcf4b845ea9ec71153e45c3 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 12 Jan 2011 15:39:07 +0100 Subject: dmaengine: at_hdmac: no need set ACK in new descriptor Following descriptor flow in at_hdmac driver, descriptor comming from atc_desc_get() as already DMA_CTRL_ACK flag set. No need to set it again. Signed-off-by: Nicolas Ferre Signed-off-by: Dan Williams --- drivers/dma/at_hdmac.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 73a470b4809b..c6ddd6ffb8f3 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -583,7 +583,6 @@ atc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, desc->lli.ctrlb = ctrlb; desc->txd.cookie = 0; - async_tx_ack(&desc->txd); if (!first) { first = desc; -- cgit v1.2.3 From 93d0bec2be4b0f036a27da207ecab97fc3d3bbbe Mon Sep 17 00:00:00 2001 From: Eric Xu Date: Wed, 12 Jan 2011 15:39:08 +0100 Subject: dmaengine: at_hdmac: use subsys_initcall instead of module_init Use subsys_initcall instead of module_init in order to keep DMA engine rolling before other peripheral drivers. Signed-off-by: Eric Xu Signed-off-by: Nicolas Ferre Signed-off-by: Dan Williams --- drivers/dma/at_hdmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index c6ddd6ffb8f3..e25c4ad01062 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -1209,7 +1209,7 @@ static int __init at_dma_init(void) { return platform_driver_probe(&at_dma_driver, at_dma_probe); } -module_init(at_dma_init); +subsys_initcall(at_dma_init); static void __exit at_dma_exit(void) { -- cgit v1.2.3 From 568f7f0c2e597671d3e646e0b85c95c4a5756fef Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 12 Jan 2011 15:39:09 +0100 Subject: dmaengine: at_hdmac: flags located in first descriptor Place flags on first descriptor of chain instead of last. This is the one used by atc_chain_complete() function while unmapping. Signed-off-by: Nicolas Ferre Signed-off-by: Dan Williams --- drivers/dma/at_hdmac.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index e25c4ad01062..3938db210834 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -603,7 +603,7 @@ atc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, /* set end-of-link to the last link descriptor of list*/ set_desc_eol(desc); - desc->txd.flags = flags; /* client is in control of this ack */ + first->txd.flags = flags; /* client is in control of this ack */ return &first->txd; @@ -748,8 +748,8 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, first->txd.cookie = -EBUSY; first->len = total_len; - /* last link descriptor of list is responsible of flags */ - prev->txd.flags = flags; /* client is in control of this ack */ + /* first link descriptor of list is responsible of flags */ + first->txd.flags = flags; /* client is in control of this ack */ return &first->txd; -- cgit v1.2.3 From dda36f9821321edf65d69da5c0807df7e73d26fc Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 12 Jan 2011 15:39:10 +0100 Subject: dmaengine: at_hdmac: fix race while monitoring channel status We were reading channel status then taking a lock. This lead to a race because this lock may delay us and then make this channel not idle anymore. Signed-off-by: Nicolas Ferre Signed-off-by: Dan Williams --- drivers/dma/at_hdmac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 3938db210834..40f2bf4ae474 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -853,11 +853,11 @@ static void atc_issue_pending(struct dma_chan *chan) dev_vdbg(chan2dev(chan), "issue_pending\n"); + spin_lock_bh(&atchan->lock); if (!atc_chan_is_enabled(atchan)) { - spin_lock_bh(&atchan->lock); atc_advance_work(atchan); - spin_unlock_bh(&atchan->lock); } + spin_unlock_bh(&atchan->lock); } /** -- cgit v1.2.3 From 98d530fe246b65fbd3cdeeeca319a80c46cb4793 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Sat, 1 Jan 2011 23:00:23 +0000 Subject: Fix dmaengine_submit() return type desc->tx_submit's return type is dma_cookie_t, not int. Therefore, dmaengine_submit() should match this return type as it's just wrapping this detail. Signed-off-by: Russell King Signed-off-by: Dan Williams --- include/linux/dmaengine.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 9d8688b92d8b..830935b7c49c 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -532,7 +532,7 @@ static inline int dmaengine_resume(struct dma_chan *chan) return dmaengine_device_control(chan, DMA_RESUME, 0); } -static inline int dmaengine_submit(struct dma_async_tx_descriptor *desc) +static inline dma_cookie_t dmaengine_submit(struct dma_async_tx_descriptor *desc) { return desc->tx_submit(desc); } -- cgit v1.2.3 From 96a608a4bfd8468c21881b3f92024923886eb015 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 14 Jan 2011 17:51:11 -0800 Subject: ARM: PL08x: fix a warning drivers/dma/amba-pl08x.c: In function 'pl08x_start_txd': drivers/dma/amba-pl08x.c:205: warning: dereferencing 'void *' pointer We never dereference llis_va aside from assigning it to a struct pl08x_lli pointer or calculating the address of array element 0. Signed-off-by: Dan Williams --- include/linux/amba/pl08x.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 933b4ed12be5..5b87b6aac3f8 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -118,7 +118,7 @@ struct pl08x_txd { dma_addr_t dst_addr; size_t len; dma_addr_t llis_bus; - void *llis_va; + struct pl08x_lli *llis_va; bool active; /* Default cctl value for LLIs */ u32 cctl; -- cgit v1.2.3 From 0261f7416362f6affc2d4fe7fea9320a6bdaaee6 Mon Sep 17 00:00:00 2001 From: Wei Yongquan Date: Wed, 29 Dec 2010 20:30:55 +0800 Subject: Update CONFIG_MD_RAID6_PQ to CONFIG_RAID6_PQ in drivers/dma/iop-adma.c Commit f5e70d0fe3ea990cfb3fc8d7f76a719adcb1e0b5 renamed MD_RAID6_PQ to RAID6_PQ, but iop-adma.c didn't update synchronously. Signed-off-by: Wei Yongquan Signed-off-by: Dan Williams --- drivers/dma/iop-adma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c index 161c452923b8..c6b01f535b29 100644 --- a/drivers/dma/iop-adma.c +++ b/drivers/dma/iop-adma.c @@ -1261,7 +1261,7 @@ out: return err; } -#ifdef CONFIG_MD_RAID6_PQ +#ifdef CONFIG_RAID6_PQ static int __devinit iop_adma_pq_zero_sum_self_test(struct iop_adma_device *device) { @@ -1584,7 +1584,7 @@ static int __devinit iop_adma_probe(struct platform_device *pdev) if (dma_has_cap(DMA_PQ, dma_dev->cap_mask) && dma_has_cap(DMA_PQ_VAL, dma_dev->cap_mask)) { - #ifdef CONFIG_MD_RAID6_PQ + #ifdef CONFIG_RAID6_PQ ret = iop_adma_pq_zero_sum_self_test(adev); dev_dbg(&pdev->dev, "pq self test returned %d\n", ret); #else -- cgit v1.2.3 From 94ae85220a07d357d4937086c490854f63344de4 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Sun, 16 Jan 2011 20:18:05 +0000 Subject: ARM: PL08x: cleanup comments Cleanup the formatting of comments, remove some which don't make sense anymore. Signed-off-by: Russell King [fix conflict with 96a608a4] Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 146 ++++++++++++++++----------------------------- include/linux/amba/pl08x.h | 43 +++++++------ 2 files changed, 72 insertions(+), 117 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index bebc678ed4fc..297f48b0cba9 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -19,14 +19,14 @@ * this program; if not, write to the Free Software Foundation, Inc., 59 * Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * The full GNU General Public License is in this distribution in the - * file called COPYING. + * The full GNU General Public License is in this distribution in the file + * called COPYING. * * Documentation: ARM DDI 0196G == PL080 - * Documentation: ARM DDI 0218E == PL081 + * Documentation: ARM DDI 0218E == PL081 * - * PL080 & PL081 both have 16 sets of DMA signals that can be routed to - * any channel. + * PL080 & PL081 both have 16 sets of DMA signals that can be routed to any + * channel. * * The PL080 has 8 channels available for simultaneous use, and the PL081 * has only two channels. So on these DMA controllers the number of channels @@ -91,11 +91,9 @@ #define DRIVER_NAME "pl08xdmac" /** - * struct vendor_data - vendor-specific config parameters - * for PL08x derivatives + * struct vendor_data - vendor-specific config parameters for PL08x derivatives * @channels: the number of channels available in this variant - * @dualmaster: whether this version supports dual AHB masters - * or not. + * @dualmaster: whether this version supports dual AHB masters or not. */ struct vendor_data { u8 channels; @@ -241,10 +239,8 @@ static void pl08x_start_txd(struct pl08x_dma_chan *plchan, * * Disabling individual channels could lose data. * - * Disable the peripheral DMA after disabling the DMAC - * in order to allow the DMAC FIFO to drain, and - * hence allow the channel to show inactive - * + * Disable the peripheral DMA after disabling the DMAC in order to allow + * the DMAC FIFO to drain, and hence allow the channel to show inactive */ static void pl08x_pause_phy_chan(struct pl08x_phy_chan *ch) { @@ -367,6 +363,10 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) /* * Allocate a physical channel for a virtual channel + * + * Try to locate a physical channel to be used for this transfer. If all + * are taken return NULL and the requester will have to cope by using + * some fallback PIO mode or retrying later. */ static struct pl08x_phy_chan * pl08x_get_phy_channel(struct pl08x_driver_data *pl08x, @@ -376,12 +376,6 @@ pl08x_get_phy_channel(struct pl08x_driver_data *pl08x, unsigned long flags; int i; - /* - * Try to locate a physical channel to be used for - * this transfer. If all are taken return NULL and - * the requester will have to cope by using some fallback - * PIO mode or retrying later. - */ for (i = 0; i < pl08x->vd->channels; i++) { ch = &pl08x->phy_chans[i]; @@ -495,9 +489,9 @@ struct pl08x_lli_build_data { }; /* - * Autoselect a master bus to use for the transfer - * this prefers the destination bus if both available - * if fixed address on one bus the other will be chosen + * Autoselect a master bus to use for the transfer this prefers the + * destination bus if both available if fixed address on one bus the + * other will be chosen */ static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd, struct pl08x_bus_data **mbus, struct pl08x_bus_data **sbus, u32 cctl) @@ -530,8 +524,7 @@ static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd, } /* - * Fills in one LLI for a certain transfer descriptor - * and advance the counter + * Fills in one LLI for a certain transfer descriptor and advance the counter */ static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd, int num_llis, int len, u32 cctl) @@ -640,15 +633,11 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, * Choose bus to align to * - prefers destination bus if both available * - if fixed address on one bus chooses other - * - modifies cctl to choose an appropriate master */ pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl); if (txd->len < mbus->buswidth) { - /* - * Less than a bus width available - * - send as single bytes - */ + /* Less than a bus width available - send as single bytes */ while (bd.remainder) { dev_vdbg(&pl08x->adev->dev, "%s single byte LLIs for a transfer of " @@ -659,10 +648,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, total_bytes++; } } else { - /* - * Make one byte LLIs until master bus is aligned - * - slave will then be aligned also - */ + /* Make one byte LLIs until master bus is aligned */ while ((mbus->addr) % (mbus->buswidth)) { dev_vdbg(&pl08x->adev->dev, "%s adjustment lli for less than bus width " @@ -674,7 +660,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, } /* - * Master now aligned + * Master now aligned * - if slave is not then we must set its width down */ if (sbus->addr % sbus->buswidth) { @@ -732,10 +718,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, if (lli_len == target_len) { /* - * Can send what we wanted - */ - /* - * Maintain alignment + * Can send what we wanted. + * Maintain alignment */ lli_len = (lli_len/mbus->buswidth) * mbus->buswidth; @@ -743,17 +727,14 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, } else { /* * So now we know how many bytes to transfer - * to get to the nearest boundary - * The next LLI will past the boundary - * - however we may be working to a boundary - * on the slave bus - * We need to ensure the master stays aligned + * to get to the nearest boundary. The next + * LLI will past the boundary. However, we + * may be working to a boundary on the slave + * bus. We need to ensure the master stays + * aligned, and that we are working in + * multiples of the bus widths. */ odd_bytes = lli_len % mbus->buswidth; - /* - * - and that we are working in multiples - * of the bus widths - */ lli_len -= odd_bytes; } @@ -793,8 +774,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, if (odd_bytes) { /* - * Creep past the boundary, - * maintaining master alignment + * Creep past the boundary, maintaining + * master alignment */ int j; for (j = 0; (j < mbus->buswidth) @@ -837,13 +818,9 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, } llis_va = txd->llis_va; - /* - * The final LLI terminates the LLI. - */ + /* The final LLI terminates the LLI. */ llis_va[num_llis - 1].lli = 0; - /* - * The final LLI element shall also fire an interrupt - */ + /* The final LLI element shall also fire an interrupt. */ llis_va[num_llis - 1].cctl |= PL080_CONTROL_TC_IRQ_EN; #ifdef VERBOSE_DEBUG @@ -891,7 +868,6 @@ static void pl08x_free_txd_list(struct pl08x_driver_data *pl08x, list_del(&txdi->node); pl08x_free_txd(pl08x, txdi); } - } } @@ -1020,10 +996,9 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_interrupt( } /* - * Code accessing dma_async_is_complete() in a tight loop - * may give problems - could schedule where indicated. - * If slaves are relying on interrupts to signal completion this - * function must not be called with interrupts disabled + * Code accessing dma_async_is_complete() in a tight loop may give problems. + * If slaves are relying on interrupts to signal completion this function + * must not be called with interrupts disabled. */ static enum dma_status pl08x_dma_tx_status(struct dma_chan *chan, @@ -1045,10 +1020,6 @@ pl08x_dma_tx_status(struct dma_chan *chan, return ret; } - /* - * schedule(); could be inserted here - */ - /* * This cookie not complete yet */ @@ -1273,11 +1244,10 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, } } else /* - * Else we're all set, paused and ready to roll, - * status will switch to PL08X_CHAN_RUNNING when - * we call issue_pending(). If there is something - * running on the channel already we don't change - * its state. + * Else we're all set, paused and ready to roll, status + * will switch to PL08X_CHAN_RUNNING when we call + * issue_pending(). If there is something running on the + * channel already we don't change its state. */ if (plchan->state == PL08X_CHAN_IDLE) plchan->state = PL08X_CHAN_PAUSED; @@ -1528,10 +1498,9 @@ bool pl08x_filter_id(struct dma_chan *chan, void *chan_id) /* * Just check that the device is there and active - * TODO: turn this bit on/off depending on the number of - * physical channels actually used, if it is zero... well - * shut it off. That will save some power. Cut the clock - * at the same time. + * TODO: turn this bit on/off depending on the number of physical channels + * actually used, if it is zero... well shut it off. That will save some + * power. Cut the clock at the same time. */ static void pl08x_ensure_on(struct pl08x_driver_data *pl08x) { @@ -1579,16 +1548,11 @@ static void pl08x_tasklet(unsigned long data) plchan->at = NULL; if (txd) { - /* - * Update last completed - */ + /* Update last completed */ plchan->lc = txd->tx.cookie; } - /* - * If a new descriptor is queued, set it up - * plchan->at is NULL here - */ + /* If a new descriptor is queued, set it up plchan->at is NULL here */ if (!list_empty(&plchan->pend_list)) { struct pl08x_txd *next; @@ -1615,11 +1579,10 @@ static void pl08x_tasklet(unsigned long data) plchan->state = PL08X_CHAN_IDLE; /* - * And NOW before anyone else can grab that free:d - * up physical channel, see if there is some memcpy - * pending that seriously needs to start because of - * being stacked up while we were choking the - * physical channels with data. + * And NOW before anyone else can grab that free:d up + * physical channel, see if there is some memcpy pending + * that seriously needs to start because of being stacked + * up while we were choking the physical channels with data. */ list_for_each_entry(waiting, &pl08x->memcpy.channels, chan.device_node) { @@ -1670,9 +1633,7 @@ static irqreturn_t pl08x_irq(int irq, void *dev) val = readl(pl08x->base + PL080_ERR_STATUS); if (val) { - /* - * An error interrupt (on one or more channels) - */ + /* An error interrupt (on one or more channels) */ dev_err(&pl08x->adev->dev, "%s error interrupt, register value 0x%08x\n", __func__, val); @@ -1696,9 +1657,7 @@ static irqreturn_t pl08x_irq(int irq, void *dev) mask |= (1 << i); } } - /* - * Clear only the terminal interrupts on channels we processed - */ + /* Clear only the terminal interrupts on channels we processed */ writel(mask, pl08x->base + PL080_TC_CLEAR); return mask ? IRQ_HANDLED : IRQ_NONE; @@ -1717,6 +1676,7 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, int i; INIT_LIST_HEAD(&dmadev->channels); + /* * Register as many many memcpy as we have physical channels, * we won't always be able to use all but the code will have @@ -1950,9 +1910,7 @@ static int pl08x_probe(struct amba_device *adev, struct amba_id *id) /* Turn on the PL08x */ pl08x_ensure_on(pl08x); - /* - * Attach the interrupt handler - */ + /* Attach the interrupt handler */ writel(0x000000FF, pl08x->base + PL080_ERR_CLEAR); writel(0x000000FF, pl08x->base + PL080_TC_CLEAR); diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 5b87b6aac3f8..3111385b8ca7 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -12,7 +12,6 @@ * * Please credit ARM.com * Documentation: ARM DDI 0196D - * */ #ifndef AMBA_PL08X_H @@ -55,8 +54,8 @@ enum { * @circular_buffer: whether the buffer passed in is circular and * shall simply be looped round round (like a record baby round * round round round) - * @single: the device connected to this channel will request single - * DMA transfers, not bursts. (Bursts are default.) + * @single: the device connected to this channel will request single DMA + * transfers, not bursts. (Bursts are default.) * @periph_buses: the device connected to this channel is accessible via * these buses (use PL08X_AHB1 | PL08X_AHB2). */ @@ -78,8 +77,7 @@ struct pl08x_channel_data { * @addr: current address * @maxwidth: the maximum width of a transfer on this bus * @buswidth: the width of this bus in bytes: 1, 2 or 4 - * @fill_bytes: bytes required to fill to the next bus memory - * boundary + * @fill_bytes: bytes required to fill to the next bus memory boundary */ struct pl08x_bus_data { dma_addr_t addr; @@ -92,10 +90,10 @@ struct pl08x_bus_data { * struct pl08x_phy_chan - holder for the physical channels * @id: physical index to this channel * @lock: a lock to use when altering an instance of this struct - * @signal: the physical signal (aka channel) serving this - * physical channel right now - * @serving: the virtual channel currently being served by this - * physical channel + * @signal: the physical signal (aka channel) serving this physical channel + * right now + * @serving: the virtual channel currently being served by this physical + * channel */ struct pl08x_phy_chan { unsigned int id; @@ -119,7 +117,6 @@ struct pl08x_txd { size_t len; dma_addr_t llis_bus; struct pl08x_lli *llis_va; - bool active; /* Default cctl value for LLIs */ u32 cctl; /* @@ -130,8 +127,8 @@ struct pl08x_txd { }; /** - * struct pl08x_dma_chan_state - holds the PL08x specific virtual - * channel states + * struct pl08x_dma_chan_state - holds the PL08x specific virtual channel + * states * @PL08X_CHAN_IDLE: the channel is idle * @PL08X_CHAN_RUNNING: the channel has allocated a physical transport * channel and is running a transfer on it @@ -152,7 +149,7 @@ enum pl08x_dma_chan_state { * @chan: wrappped abstract channel * @phychan: the physical channel utilized by this channel, if there is one * @phychan_hold: if non-zero, hold on to the physical channel even if we - * have no pending entries + * have no pending entries * @tasklet: tasklet scheduled by the IRQ to handle actual work etc * @name: name of channel * @cd: channel platform data @@ -166,8 +163,8 @@ enum pl08x_dma_chan_state { * @host: a pointer to the host (internal use) * @state: whether the channel is idle, paused, running etc * @slave: whether this channel is a device (slave) or for memcpy - * @waiting: a TX descriptor on this channel which is waiting for - * a physical channel to become available + * @waiting: a TX descriptor on this channel which is waiting for a physical + * channel to become available */ struct pl08x_dma_chan { struct dma_chan chan; @@ -189,16 +186,16 @@ struct pl08x_dma_chan { }; /** - * struct pl08x_platform_data - the platform configuration for the - * PL08x PrimeCells. + * struct pl08x_platform_data - the platform configuration for the PL08x + * PrimeCells. * @slave_channels: the channels defined for the different devices on the * platform, all inclusive, including multiplexed channels. The available - * physical channels will be multiplexed around these signals as they - * are requested, just enumerate all possible channels. - * @get_signal: request a physical signal to be used for a DMA - * transfer immediately: if there is some multiplexing or similar blocking - * the use of the channel the transfer can be denied by returning - * less than zero, else it returns the allocated signal number + * physical channels will be multiplexed around these signals as they are + * requested, just enumerate all possible channels. + * @get_signal: request a physical signal to be used for a DMA transfer + * immediately: if there is some multiplexing or similar blocking the use + * of the channel the transfer can be denied by returning less than zero, + * else it returns the allocated signal number * @put_signal: indicate to the platform that this physical signal is not * running any DMA transfer and multiplexing can be recycled * @lli_buses: buses which LLIs can be fetched from: PL08X_AHB1 | PL08X_AHB2 -- cgit v1.2.3