From 135d01899b1fba17045961febff7e5141db6048f Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 19 Jan 2010 19:06:59 +0100 Subject: netfilter: nf_conntrack_sip: fix off-by-one in compact header parsing In a string like "v:SIP/2.0..." it was checking for !isalpha('S') when it meant to be inspecting the ':'. Patch by Greg Alexander Signed-off-by: Patrick McHardy --- net/netfilter/nf_conntrack_sip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c index 4b572163784b..023966b569bf 100644 --- a/net/netfilter/nf_conntrack_sip.c +++ b/net/netfilter/nf_conntrack_sip.c @@ -376,7 +376,7 @@ int ct_sip_get_header(const struct nf_conn *ct, const char *dptr, dptr += hdr->len; else if (hdr->cname && limit - dptr >= hdr->clen + 1 && strnicmp(dptr, hdr->cname, hdr->clen) == 0 && - !isalpha(*(dptr + hdr->clen + 1))) + !isalpha(*(dptr + hdr->clen))) dptr += hdr->clen; else continue; -- cgit v1.2.3 From 74401773f80b6d42f7a4c6994ca0cca883b03745 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 19 Jan 2010 20:51:32 +0100 Subject: ath9k: fix beacon slot/buffer leak When cleaning up beacon buffers and slots, ath9k currently checks if sc->ah->opmode is set to a beacon related mode before cleaning up buffers. An unfortunate ordering of interface up/down commands can lead to sc->ah->opmode being set to monitor mode, while there are AP interfaces present on the same wiphy. Always cleaning up beacon buffers if present fixes this issue. Signed-off-by: Felix Fietkau Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 996eb90263cc..643bea35686f 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -2655,10 +2655,10 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) { ath9k_ps_wakeup(sc); ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq); - ath_beacon_return(sc, avp); ath9k_ps_restore(sc); } + ath_beacon_return(sc, avp); sc->sc_flags &= ~SC_OP_BEACONS; for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) { -- cgit v1.2.3 From 0b5d9b2689af0f59aeba67dc749b3681290d2166 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 22 Jan 2010 14:22:34 -0800 Subject: iwlwifi: fix pointer signedness warning There are a few station addresses that are char *, instead of the normal u8 *; gcc gives pointer signedness warnings for some of those, so use u8 * consistently. Signed-off-by: Johannes Berg Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-sta.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index cde09a890b73..90fbdb25399e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -297,7 +297,7 @@ u8 iwl_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap, u8 flags, } EXPORT_SYMBOL(iwl_add_station); -static void iwl_sta_ucode_deactivate(struct iwl_priv *priv, const char *addr) +static void iwl_sta_ucode_deactivate(struct iwl_priv *priv, const u8 *addr) { unsigned long flags; u8 sta_id = iwl_find_station(priv, addr); @@ -324,7 +324,7 @@ static void iwl_remove_sta_callback(struct iwl_priv *priv, { struct iwl_rem_sta_cmd *rm_sta = (struct iwl_rem_sta_cmd *)cmd->cmd.payload; - const char *addr = rm_sta->addr; + const u8 *addr = rm_sta->addr; if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) { IWL_ERR(priv, "Bad return from REPLY_REMOVE_STA (0x%08X)\n", -- cgit v1.2.3 From aa8bc9ef18a2c5b2b97e1f36ee9604cf15743f96 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 23 Jan 2010 20:04:18 +0100 Subject: ath9k: fix eeprom INI values override for 2GHz-only cards Among other changes, this commit: commit 06d0f0663e11cab4ec5f2c143a118d71a12fbbe9 Author: Sujith Date: Thu Feb 12 10:06:45 2009 +0530 ath9k: Enable Fractional N mode changed the hw attach code to fix up initialization values only for dual band devices, however the commit message did not give a reason as to why this would be useful or necessary. According to tests by Jorge Boncompte, this breaks at least some 2GHz-only cards, so the code should be changed back to the unconditional INI fixup. Signed-off-by: Felix Fietkau Reported-by: Jorge Boncompte Cc: stable@kernel.org Tested-by: Pavel Roskin Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 2ec61f08cfdb..ae371448b5a0 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -855,12 +855,11 @@ static void ath9k_hw_init_mode_gain_regs(struct ath_hw *ah) } } -static void ath9k_hw_init_11a_eeprom_fix(struct ath_hw *ah) +static void ath9k_hw_init_eeprom_fix(struct ath_hw *ah) { u32 i, j; - if ((ah->hw_version.devid == AR9280_DEVID_PCI) && - test_bit(ATH9K_MODE_11A, ah->caps.wireless_modes)) { + if (ah->hw_version.devid == AR9280_DEVID_PCI) { /* EEPROM Fixup */ for (i = 0; i < ah->iniModes.ia_rows; i++) { @@ -980,7 +979,7 @@ int ath9k_hw_init(struct ath_hw *ah) if (r) return r; - ath9k_hw_init_11a_eeprom_fix(ah); + ath9k_hw_init_eeprom_fix(ah); r = ath9k_hw_init_macaddr(ah); if (r) { -- cgit v1.2.3 From c92b544bd5d8e7ed7d81c77bbecab6df2a95aa53 Mon Sep 17 00:00:00 2001 From: Shan Wei Date: Tue, 26 Jan 2010 02:40:38 +0000 Subject: ipv6: conntrack: Add member of user to nf_ct_frag6_queue structure The commit 0b5ccb2(title:ipv6: reassembly: use seperate reassembly queues for conntrack and local delivery) has broken the saddr&&daddr member of nf_ct_frag6_queue when creating new queue. And then hash value generated by nf_hashfn() was not equal with that generated by fq_find(). So, a new received fragment can't be inserted to right queue. The patch fixes the bug with adding member of user to nf_ct_frag6_queue structure. Signed-off-by: Shan Wei Acked-by: Patrick McHardy Signed-off-by: David S. Miller --- net/ipv6/netfilter/nf_conntrack_reasm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c index 312c20adc83f..624a54832a7c 100644 --- a/net/ipv6/netfilter/nf_conntrack_reasm.c +++ b/net/ipv6/netfilter/nf_conntrack_reasm.c @@ -63,6 +63,7 @@ struct nf_ct_frag6_queue struct inet_frag_queue q; __be32 id; /* fragment id */ + u32 user; struct in6_addr saddr; struct in6_addr daddr; -- cgit v1.2.3 From e578756c35859a459d78d8416195bc5f5ff897d0 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 26 Jan 2010 17:04:02 +0100 Subject: netfilter: ctnetlink: fix expectation mask dump The protocol number is not initialized, so userspace can't interpret the layer 4 data properly. Signed-off-by: Patrick McHardy --- net/netfilter/nf_conntrack_netlink.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 59d8064eb522..42f21c01a93e 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -1437,8 +1437,9 @@ ctnetlink_exp_dump_mask(struct sk_buff *skb, struct nlattr *nest_parms; memset(&m, 0xFF, sizeof(m)); - m.src.u.all = mask->src.u.all; memcpy(&m.src.u3, &mask->src.u3, sizeof(m.src.u3)); + m.src.u.all = mask->src.u.all; + m.dst.protonum = tuple->dst.protonum; nest_parms = nla_nest_start(skb, CTA_EXPECT_MASK | NLA_F_NESTED); if (!nest_parms) -- cgit v1.2.3 From 3092ad054406f069991ca561adc74f2d9fbb6867 Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Tue, 26 Jan 2010 15:58:57 +0800 Subject: mac80211: fix NULL pointer dereference when ftrace is enabled I got below kernel oops when I try to bring down the network interface if ftrace is enabled. The root cause is drv_ampdu_action() is passed with a NULL ssn pointer in the BA session tear down case. We need to check and avoid dereferencing it in trace entry assignment. BUG: unable to handle kernel NULL pointer dereference Modules linked in: at (null) IP: [] ftrace_raw_event_drv_ampdu_action+0x10a/0x160 [mac80211] *pde = 00000000 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [...] Call Trace: [] ? ftrace_raw_event_drv_ampdu_action+0x0/0x160 [mac80211] [] ? __ieee80211_stop_rx_ba_session+0xfc/0x220 [mac80211] [] ? ieee80211_sta_tear_down_BA_sessions+0x3b/0x50 [mac80211] [] ? ieee80211_set_disassoc+0xe6/0x230 [mac80211] [] ? ieee80211_set_disassoc+0x9c/0x230 [mac80211] [] ? ieee80211_mgd_deauth+0x158/0x170 [mac80211] [] ? ieee80211_deauth+0x1b/0x20 [mac80211] [] ? __cfg80211_mlme_deauth+0xe9/0x120 [cfg80211] [] ? __cfg80211_disconnect+0x170/0x1d0 [cfg80211] Cc: Johannes Berg Cc: stable@kernel.org Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- net/mac80211/driver-trace.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/driver-trace.h b/net/mac80211/driver-trace.h index ee94ea0c67e9..da8497ef7063 100644 --- a/net/mac80211/driver-trace.h +++ b/net/mac80211/driver-trace.h @@ -680,7 +680,7 @@ TRACE_EVENT(drv_ampdu_action, __entry->ret = ret; __entry->action = action; __entry->tid = tid; - __entry->ssn = *ssn; + __entry->ssn = ssn ? *ssn : 0; ), TP_printk( -- cgit v1.2.3 From c928febf4bc703ea542340e5a208e0445d998839 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Tue, 26 Jan 2010 18:27:09 +0000 Subject: starfire: clean up properly if firmware loading fails netdev_open() will return without cleaning up net device or hardware state if firmware loading fails. This results in a BUG() on a second attempt to bring the interface up, reported in , and probably has even worse effects if the driver is removed afterwards. Call netdev_close() to clean up on failure. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=15091 Signed-off-by: Ben Hutchings Reported-by: Michael Moffatt Tested-by: Michael Moffatt Cc: "David S. Miller" Cc: Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/net/starfire.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index 95db60adde41..f9521136a869 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -1063,7 +1063,7 @@ static int netdev_open(struct net_device *dev) if (retval) { printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n", FIRMWARE_RX); - return retval; + goto out_init; } if (fw_rx->size % 4) { printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n", @@ -1108,6 +1108,9 @@ out_tx: release_firmware(fw_tx); out_rx: release_firmware(fw_rx); +out_init: + if (retval) + netdev_close(dev); return retval; } -- cgit v1.2.3 From 7b139c83c590d4965259aad8889cbb08104b2891 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Wed, 27 Jan 2010 21:56:44 +0000 Subject: be2net: Bug fix to support newer generation of BE ASIC Bug fix in be2net for newer generation of BladeEngine ASIC. Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/benet/be.h | 5 +++++ drivers/net/benet/be_cmds.h | 3 ++- drivers/net/benet/be_main.c | 25 +++++++++++++++++++++++-- 3 files changed, 30 insertions(+), 3 deletions(-) diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h index 9fd8e5ecd5d7..5bc74590c73e 100644 --- a/drivers/net/benet/be.h +++ b/drivers/net/benet/be.h @@ -276,8 +276,13 @@ struct be_adapter { int link_speed; u8 port_type; u8 transceiver; + u8 generation; /* BladeEngine ASIC generation */ }; +/* BladeEngine Generation numbers */ +#define BE_GEN2 2 +#define BE_GEN3 3 + extern const struct ethtool_ops be_ethtool_ops; #define drvr_stats(adapter) (&adapter->stats.drvr_stats) diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h index c002b8391b4d..13b33c841083 100644 --- a/drivers/net/benet/be_cmds.h +++ b/drivers/net/benet/be_cmds.h @@ -164,7 +164,8 @@ struct be_cmd_req_hdr { u8 domain; /* dword 0 */ u32 timeout; /* dword 1 */ u32 request_length; /* dword 2 */ - u32 rsvd; /* dword 3 */ + u8 version; /* dword 3 */ + u8 rsvd[3]; /* dword 3 */ }; #define RESP_HDR_INFO_OPCODE_SHIFT 0 /* bits 0 - 7 */ diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 33ab8c7f14fe..90c5661b336f 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -2051,6 +2051,7 @@ static void be_unmap_pci_bars(struct be_adapter *adapter) static int be_map_pci_bars(struct be_adapter *adapter) { u8 __iomem *addr; + int pcicfg_reg; addr = ioremap_nocache(pci_resource_start(adapter->pdev, 2), pci_resource_len(adapter->pdev, 2)); @@ -2064,8 +2065,13 @@ static int be_map_pci_bars(struct be_adapter *adapter) goto pci_map_err; adapter->db = addr; - addr = ioremap_nocache(pci_resource_start(adapter->pdev, 1), - pci_resource_len(adapter->pdev, 1)); + if (adapter->generation == BE_GEN2) + pcicfg_reg = 1; + else + pcicfg_reg = 0; + + addr = ioremap_nocache(pci_resource_start(adapter->pdev, pcicfg_reg), + pci_resource_len(adapter->pdev, pcicfg_reg)); if (addr == NULL) goto pci_map_err; adapter->pcicfg = addr; @@ -2162,6 +2168,7 @@ static int be_stats_init(struct be_adapter *adapter) cmd->va = pci_alloc_consistent(adapter->pdev, cmd->size, &cmd->dma); if (cmd->va == NULL) return -1; + memset(cmd->va, cmd->size, 0); return 0; } @@ -2240,6 +2247,20 @@ static int __devinit be_probe(struct pci_dev *pdev, goto rel_reg; } adapter = netdev_priv(netdev); + + switch (pdev->device) { + case BE_DEVICE_ID1: + case OC_DEVICE_ID1: + adapter->generation = BE_GEN2; + break; + case BE_DEVICE_ID2: + case OC_DEVICE_ID2: + adapter->generation = BE_GEN3; + break; + default: + adapter->generation = 0; + } + adapter->pdev = pdev; pci_set_drvdata(pdev, adapter); adapter->netdev = netdev; -- cgit v1.2.3 From aeedba8bd2cf2f6f7b45bc7853754a03bc926797 Mon Sep 17 00:00:00 2001 From: "Choi, David" Date: Wed, 27 Jan 2010 06:03:16 +0000 Subject: drivers/net: ks8851_mll ethernet network driver Hello David Miller, I fix a bug in ks8851_mll driver, which has existed since 2.6.32-rc6. >From : David J. Choi Fix a bug that the data pointers in the interrupt handler are set wrong, which is related with the 5th parameter of request_irq(). Signed-off-by : David J. Choi Signed-off-by: David S. Miller --- drivers/net/ks8851_mll.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c index c146304d8d6c..c0ceebccaa49 100644 --- a/drivers/net/ks8851_mll.c +++ b/drivers/net/ks8851_mll.c @@ -854,8 +854,8 @@ static void ks_update_link_status(struct net_device *netdev, struct ks_net *ks) static irqreturn_t ks_irq(int irq, void *pw) { - struct ks_net *ks = pw; - struct net_device *netdev = ks->netdev; + struct net_device *netdev = pw; + struct ks_net *ks = netdev_priv(netdev); u16 status; /*this should be the first in IRQ handler */ -- cgit v1.2.3 From ac26d7d6aca9621f75f6954c159d2727c9c9cbd0 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 27 Jan 2010 15:30:39 +0000 Subject: igbvf: fix issue w/ mapped_as_page being left set after unmap This change fixes an issue in igbvf with mapped_as_page being left set after a page is unmapped which results in buffers which are mapped via map single being unmapped as page. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igbvf/netdev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c index 297a5ddd77f0..2aa71a766c35 100644 --- a/drivers/net/igbvf/netdev.c +++ b/drivers/net/igbvf/netdev.c @@ -2117,6 +2117,7 @@ static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter, /* set time_stamp *before* dma to help avoid a possible race */ buffer_info->time_stamp = jiffies; buffer_info->next_to_watch = i; + buffer_info->mapped_as_page = false; buffer_info->dma = pci_map_single(pdev, skb->data, len, PCI_DMA_TODEVICE); if (pci_dma_mapping_error(pdev, buffer_info->dma)) -- cgit v1.2.3 From ebe1b30cd441b576fb9d0b42857af3e423dd5826 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Wed, 27 Jan 2010 16:37:44 +0000 Subject: ixgbe: set the correct DCB bit for pg tx settings Set the correct bit BIT_PG_TX when tx PG settings are set. Signed-off-by: John Fastabend Acked-by: PJ Waskiewicz Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_dcb_nl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c index 56f37f66b696..383e799c5fed 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c @@ -223,7 +223,7 @@ static void ixgbe_dcbnl_set_pg_bwg_cfg_tx(struct net_device *netdev, int bwg_id, if (adapter->temp_dcb_cfg.bw_percentage[0][bwg_id] != adapter->dcb_cfg.bw_percentage[0][bwg_id]) { - adapter->dcb_set_bitmap |= BIT_PG_RX; + adapter->dcb_set_bitmap |= BIT_PG_TX; adapter->dcb_set_bitmap |= BIT_RESETLINK; } } -- cgit v1.2.3 From 3ce1cc52d2e76b6a6b9d0b52b70eb181497efa50 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Wed, 27 Jan 2010 16:38:06 +0000 Subject: ixgbe: if ixgbe_copy_dcb_cfg is going to fail learn about it early Call ixgbe_copy_dcb_cfg() earlier in the ixgbe_dcbnl_set_all() so that we can learn if this is going to fail as early as possible. Previously, ixgbe_down or ixgbe_close were being called before this check and the IXGBE_RESETTING bit was being set and cleared. Worse if this failed the corresponding ixgbe_up/ndo_open would not called. Signed-off-by: John Fastabend Acked-by: PJ Waskiewicz Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_dcb_nl.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c index 383e799c5fed..dd4883f642be 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c @@ -341,6 +341,12 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) if (!adapter->dcb_set_bitmap) return DCB_NO_HW_CHG; + ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg, + adapter->ring_feature[RING_F_DCB].indices); + + if (ret) + return DCB_NO_HW_CHG; + /* * Only take down the adapter if the configuration change * requires a reset. @@ -359,14 +365,6 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) } } - ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg, - adapter->ring_feature[RING_F_DCB].indices); - if (ret) { - if (adapter->dcb_set_bitmap & BIT_RESETLINK) - clear_bit(__IXGBE_RESETTING, &adapter->state); - return DCB_NO_HW_CHG; - } - if (adapter->dcb_cfg.pfc_mode_enable) { if ((adapter->hw.mac.type != ixgbe_mac_82598EB) && (adapter->hw.fc.current_mode != ixgbe_fc_pfc)) -- cgit v1.2.3 From b473946a0853860e13b51c28add5524741117786 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Mon, 25 Jan 2010 23:34:15 +0000 Subject: bonding: bond_open error return value The convention for API functions in kernel is to return errno value; bond_open would return -1 if alb setup failed. The only reason that could happen is if kmalloc() failed. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 3f0071cfe56b..efa0e41bf3ec 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3639,7 +3639,7 @@ static int bond_open(struct net_device *bond_dev) */ if (bond_alb_initialize(bond, (bond->params.mode == BOND_MODE_ALB))) { /* something went wrong - fail the open operation */ - return -1; + return -ENOMEM; } INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor); -- cgit v1.2.3 From d291b9af1a1a12f59a464494900c6e0db26e2ec3 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 28 Jan 2010 21:36:21 -0800 Subject: be2net: Fix memset() arg ordering. Noticed by Ben Hutchings. Signed-off-by: David S. Miller --- drivers/net/benet/be_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 90c5661b336f..6f2633887dc3 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -2168,7 +2168,7 @@ static int be_stats_init(struct be_adapter *adapter) cmd->va = pci_alloc_consistent(adapter->pdev, cmd->size, &cmd->dma); if (cmd->va == NULL) return -1; - memset(cmd->va, cmd->size, 0); + memset(cmd->va, 0, cmd->size); return 0; } -- cgit v1.2.3 From 71cc1fa9f2d71eb2eba9b8e71e27cff9863e55f3 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Thu, 28 Jan 2010 21:37:18 -0800 Subject: cdc_ether: Partially revert "usbnet: Set link down initially ..." Commit 37e8273cd30592d3a82bcb70cbb1bdc4eaeb6b71 ("usbnet: Set link down initially for drivers that update link state") changed the initial link state in cdc_ether and other drivers based on the understanding that the devices they support generate link change interrupts. However, this is optional in the CDC Ethernet protocol, and two users have reported in that the link state for their devices remains down. Therefore, revert the change in cdc_ether. Signed-off-by: Ben Hutchings Tested-by: Avi Rozen Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ether.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 21e183a83b99..4f27f022fbf7 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -419,7 +419,7 @@ static int cdc_manage_power(struct usbnet *dev, int on) static const struct driver_info cdc_info = { .description = "CDC Ethernet Device", - .flags = FLAG_ETHER | FLAG_LINK_INTR, + .flags = FLAG_ETHER, // .check_connect = cdc_check_connect, .bind = cdc_bind, .unbind = usbnet_cdc_unbind, -- cgit v1.2.3 From fcafde2e6d81aa7901f9b10e6a097592f0637b79 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Tue, 22 Dec 2009 15:58:08 +0200 Subject: Bluetooth: Remove double free of SKB pointer in L2CAP Trivial fix for double free of SKB pointer with kfree_skb to make code simplier and cleaner. Remove unused variable err. Signed-off-by: Andrei Emeltchenko Acked-by: Gustavo F. Padovan Signed-off-by: Marcel Holtmann --- net/bluetooth/l2cap.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index 1120cf14a548..8acc19ed9c4d 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -3518,7 +3518,6 @@ static inline int l2cap_data_channel(struct l2cap_conn *conn, u16 cid, struct sk struct l2cap_pinfo *pi; u16 control, len; u8 tx_seq; - int err; sk = l2cap_get_chan_by_scid(&conn->chan_list, cid); if (!sk) { @@ -3570,13 +3569,11 @@ static inline int l2cap_data_channel(struct l2cap_conn *conn, u16 cid, struct sk goto drop; if (__is_iframe(control)) - err = l2cap_data_channel_iframe(sk, control, skb); + l2cap_data_channel_iframe(sk, control, skb); else - err = l2cap_data_channel_sframe(sk, control, skb); + l2cap_data_channel_sframe(sk, control, skb); - if (!err) - goto done; - break; + goto done; case L2CAP_MODE_STREAMING: control = get_unaligned_le16(skb->data); @@ -3602,7 +3599,7 @@ static inline int l2cap_data_channel(struct l2cap_conn *conn, u16 cid, struct sk else pi->expected_tx_seq = tx_seq + 1; - err = l2cap_sar_reassembly_sdu(sk, skb, control); + l2cap_sar_reassembly_sdu(sk, skb, control); goto done; -- cgit v1.2.3 From e420aba331f44de0eed6871441293a6124d566d1 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Wed, 23 Dec 2009 13:07:14 +0200 Subject: Bluetooth: Fix memory leak in L2CAP Move skb_clone after error confition check so it is not going potentially out of the scope. Signed-off-by: Andrei Emeltchenko Acked-by: Gustavo F. Padovan Signed-off-by: Marcel Holtmann --- net/bluetooth/l2cap.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index 8acc19ed9c4d..400efa26ddba 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -1368,7 +1368,6 @@ static int l2cap_ertm_send(struct sock *sk) while ((skb = sk->sk_send_head) && (!l2cap_tx_window_full(sk)) && !(pi->conn_state & L2CAP_CONN_REMOTE_BUSY)) { - tx_skb = skb_clone(skb, GFP_ATOMIC); if (pi->remote_max_tx && bt_cb(skb)->retries == pi->remote_max_tx) { @@ -1376,6 +1375,8 @@ static int l2cap_ertm_send(struct sock *sk) break; } + tx_skb = skb_clone(skb, GFP_ATOMIC); + bt_cb(skb)->retries++; control = get_unaligned_le16(tx_skb->data + L2CAP_HDR_SIZE); -- cgit v1.2.3 From 7427847d2d044d85f478757ea03165ae3cfe87c4 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 14 Sep 2009 13:43:49 -0400 Subject: Bluetooth: Redo checks in IRQ handler for shared IRQ support Commit ac019360fe3 changed the irq handler logic to BUG_ON rather than returning IRQ_NONE when the incoming argument is invalid. While this works in most cases, it doesn't work when the IRQ is shared with other devices (or when DEBUG_SHIRQ is enabled). So revert the previous change and replace the warning message with a comment explaining that we want this behavior. Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger Signed-off-by: Marcel Holtmann --- drivers/bluetooth/bluecard_cs.c | 4 +++- drivers/bluetooth/bt3c_cs.c | 4 +++- drivers/bluetooth/btuart_cs.c | 4 +++- drivers/bluetooth/dtl1_cs.c | 4 +++- 4 files changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c index 2acdc605cb4b..c2cf81144715 100644 --- a/drivers/bluetooth/bluecard_cs.c +++ b/drivers/bluetooth/bluecard_cs.c @@ -503,7 +503,9 @@ static irqreturn_t bluecard_interrupt(int irq, void *dev_inst) unsigned int iobase; unsigned char reg; - BUG_ON(!info->hdev); + if (!info || !info->hdev) + /* our irq handler is shared */ + return IRQ_NONE; if (!test_bit(CARD_READY, &(info->hw_state))) return IRQ_HANDLED; diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index d814a2755ccb..9f5926aaf57f 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -345,7 +345,9 @@ static irqreturn_t bt3c_interrupt(int irq, void *dev_inst) int iir; irqreturn_t r = IRQ_NONE; - BUG_ON(!info->hdev); + if (!info || !info->hdev) + /* our irq handler is shared */ + return IRQ_NONE; iobase = info->p_dev->io.BasePort1; diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index d339464dc15e..91c523099804 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -295,7 +295,9 @@ static irqreturn_t btuart_interrupt(int irq, void *dev_inst) int iir, lsr; irqreturn_t r = IRQ_NONE; - BUG_ON(!info->hdev); + if (!info || !info->hdev) + /* our irq handler is shared */ + return IRQ_NONE; iobase = info->p_dev->io.BasePort1; diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c index 4f02a6f3c980..697591941e17 100644 --- a/drivers/bluetooth/dtl1_cs.c +++ b/drivers/bluetooth/dtl1_cs.c @@ -299,7 +299,9 @@ static irqreturn_t dtl1_interrupt(int irq, void *dev_inst) int iir, lsr; irqreturn_t r = IRQ_NONE; - BUG_ON(!info->hdev); + if (!info || !info->hdev) + /* our irq handler is shared */ + return IRQ_NONE; iobase = info->p_dev->io.BasePort1; -- cgit v1.2.3 From 9670d80a9a6e24725c4111bef5d6cc7786ad0dc5 Mon Sep 17 00:00:00 2001 From: Vikram Kandukuri Date: Wed, 6 Jan 2010 19:04:15 +0530 Subject: Bluetooth: Add DFU driver for Atheros Bluetooth chipset AR3011 Signed-off-by: Vikram Kandukuri Signed-off-by: Alicke Xu Reviewed-by: Luis R. Rodriguez Signed-off-by: Marcel Holtmann --- drivers/bluetooth/Kconfig | 13 +++- drivers/bluetooth/Makefile | 1 + drivers/bluetooth/ath3k.c | 187 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 200 insertions(+), 1 deletion(-) create mode 100644 drivers/bluetooth/ath3k.c diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index 652367aa6546..058fbccf2f52 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -195,5 +195,16 @@ config BT_MRVL_SDIO Say Y here to compile support for Marvell BT-over-SDIO driver into the kernel or say M to compile it as module. -endmenu +config BT_ATH3K + tristate "Atheros firmware download driver" + depends on BT_HCIBTUSB + select FW_LOADER + help + Bluetooth firmware download driver. + This driver loads the firmware into the Atheros Bluetooth + chipset. + Say Y here to compile support for "Atheros firmware download driver" + into the kernel or say M to compile it as module (ath3k). + +endmenu diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile index b3f57d2d4eb0..7e5aed598121 100644 --- a/drivers/bluetooth/Makefile +++ b/drivers/bluetooth/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_BT_HCIBTUART) += btuart_cs.o obj-$(CONFIG_BT_HCIBTUSB) += btusb.o obj-$(CONFIG_BT_HCIBTSDIO) += btsdio.o +obj-$(CONFIG_BT_ATH3K) += ath3k.o obj-$(CONFIG_BT_MRVL) += btmrvl.o obj-$(CONFIG_BT_MRVL_SDIO) += btmrvl_sdio.o diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c new file mode 100644 index 000000000000..add9485ca5b6 --- /dev/null +++ b/drivers/bluetooth/ath3k.c @@ -0,0 +1,187 @@ +/* + * Copyright (c) 2008-2009 Atheros Communications Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define VERSION "1.0" + + +static struct usb_device_id ath3k_table[] = { + /* Atheros AR3011 */ + { USB_DEVICE(0x0CF3, 0x3000) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, ath3k_table); + +#define USB_REQ_DFU_DNLOAD 1 +#define BULK_SIZE 4096 + +struct ath3k_data { + struct usb_device *udev; + u8 *fw_data; + u32 fw_size; + u32 fw_sent; +}; + +static int ath3k_load_firmware(struct ath3k_data *data, + unsigned char *firmware, + int count) +{ + u8 *send_buf; + int err, pipe, len, size, sent = 0; + + BT_DBG("ath3k %p udev %p", data, data->udev); + + pipe = usb_sndctrlpipe(data->udev, 0); + + if ((usb_control_msg(data->udev, pipe, + USB_REQ_DFU_DNLOAD, + USB_TYPE_VENDOR, 0, 0, + firmware, 20, USB_CTRL_SET_TIMEOUT)) < 0) { + BT_ERR("Can't change to loading configuration err"); + return -EBUSY; + } + sent += 20; + count -= 20; + + send_buf = kmalloc(BULK_SIZE, GFP_ATOMIC); + if (!send_buf) { + BT_ERR("Can't allocate memory chunk for firmware"); + return -ENOMEM; + } + + while (count) { + size = min_t(uint, count, BULK_SIZE); + pipe = usb_sndbulkpipe(data->udev, 0x02); + memcpy(send_buf, firmware + sent, size); + + err = usb_bulk_msg(data->udev, pipe, send_buf, size, + &len, 3000); + + if (err || (len != size)) { + BT_ERR("Error in firmware loading err = %d," + "len = %d, size = %d", err, len, size); + goto error; + } + + sent += size; + count -= size; + } + + kfree(send_buf); + return 0; + +error: + kfree(send_buf); + return err; +} + +static int ath3k_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + const struct firmware *firmware; + struct usb_device *udev = interface_to_usbdev(intf); + struct ath3k_data *data; + int size; + + BT_DBG("intf %p id %p", intf, id); + + if (intf->cur_altsetting->desc.bInterfaceNumber != 0) + return -ENODEV; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->udev = udev; + + if (request_firmware(&firmware, "ath3k-1.fw", &udev->dev) < 0) { + kfree(data); + return -EIO; + } + + size = max_t(uint, firmware->size, 4096); + data->fw_data = kmalloc(size, GFP_KERNEL); + if (!data->fw_data) { + release_firmware(firmware); + kfree(data); + return -ENOMEM; + } + + memcpy(data->fw_data, firmware->data, firmware->size); + data->fw_size = firmware->size; + data->fw_sent = 0; + release_firmware(firmware); + + usb_set_intfdata(intf, data); + if (ath3k_load_firmware(data, data->fw_data, data->fw_size)) { + usb_set_intfdata(intf, NULL); + return -EIO; + } + + return 0; +} + +static void ath3k_disconnect(struct usb_interface *intf) +{ + struct ath3k_data *data = usb_get_intfdata(intf); + + BT_DBG("ath3k_disconnect intf %p", intf); + + kfree(data->fw_data); + kfree(data); +} + +static struct usb_driver ath3k_driver = { + .name = "ath3k", + .probe = ath3k_probe, + .disconnect = ath3k_disconnect, + .id_table = ath3k_table, +}; + +static int __init ath3k_init(void) +{ + BT_INFO("Atheros AR30xx firmware driver ver %s", VERSION); + return usb_register(&ath3k_driver); +} + +static void __exit ath3k_exit(void) +{ + usb_deregister(&ath3k_driver); +} + +module_init(ath3k_init); +module_exit(ath3k_exit); + +MODULE_AUTHOR("Atheros Communications"); +MODULE_DESCRIPTION("Atheros AR30xx firmware driver"); +MODULE_VERSION(VERSION); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("ath3k-1.fw"); -- cgit v1.2.3 From 6bf8268f9a91f1065c99503161ebd061492bebe3 Mon Sep 17 00:00:00 2001 From: Bastien Nocera Date: Wed, 20 Jan 2010 12:00:42 +0000 Subject: Bluetooth: Use the control channel for raw HID reports In commit 2da31939a42f7a676a0bc5155d6a0a39ed8451f2, support for Bluetooth hid_output_raw_report was added, but it pushes the data to the interrupt channel instead of the contol one. This patch makes hid_output_raw_report use the control channel instead. Using the interrupt channel was a mistake. Signed-off-by: Bastien Nocera Signed-off-by: Marcel Holtmann --- net/bluetooth/hidp/core.c | 70 ++++++++++++++++++++++++----------------------- 1 file changed, 36 insertions(+), 34 deletions(-) diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c index 18e7f5a43dc4..6cf526d06e21 100644 --- a/net/bluetooth/hidp/core.c +++ b/net/bluetooth/hidp/core.c @@ -243,6 +243,39 @@ static void hidp_input_report(struct hidp_session *session, struct sk_buff *skb) input_sync(dev); } +static int __hidp_send_ctrl_message(struct hidp_session *session, + unsigned char hdr, unsigned char *data, int size) +{ + struct sk_buff *skb; + + BT_DBG("session %p data %p size %d", session, data, size); + + if (!(skb = alloc_skb(size + 1, GFP_ATOMIC))) { + BT_ERR("Can't allocate memory for new frame"); + return -ENOMEM; + } + + *skb_put(skb, 1) = hdr; + if (data && size > 0) + memcpy(skb_put(skb, size), data, size); + + skb_queue_tail(&session->ctrl_transmit, skb); + + return 0; +} + +static inline int hidp_send_ctrl_message(struct hidp_session *session, + unsigned char hdr, unsigned char *data, int size) +{ + int err; + + err = __hidp_send_ctrl_message(session, hdr, data, size); + + hidp_schedule(session); + + return err; +} + static int hidp_queue_report(struct hidp_session *session, unsigned char *data, int size) { @@ -282,7 +315,9 @@ static int hidp_send_report(struct hidp_session *session, struct hid_report *rep static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data, size_t count) { - if (hidp_queue_report(hid->driver_data, data, count)) + if (hidp_send_ctrl_message(hid->driver_data, + HIDP_TRANS_SET_REPORT | HIDP_DATA_RTYPE_FEATURE, + data, count)) return -ENOMEM; return count; } @@ -307,39 +342,6 @@ static inline void hidp_del_timer(struct hidp_session *session) del_timer(&session->timer); } -static int __hidp_send_ctrl_message(struct hidp_session *session, - unsigned char hdr, unsigned char *data, int size) -{ - struct sk_buff *skb; - - BT_DBG("session %p data %p size %d", session, data, size); - - if (!(skb = alloc_skb(size + 1, GFP_ATOMIC))) { - BT_ERR("Can't allocate memory for new frame"); - return -ENOMEM; - } - - *skb_put(skb, 1) = hdr; - if (data && size > 0) - memcpy(skb_put(skb, size), data, size); - - skb_queue_tail(&session->ctrl_transmit, skb); - - return 0; -} - -static inline int hidp_send_ctrl_message(struct hidp_session *session, - unsigned char hdr, unsigned char *data, int size) -{ - int err; - - err = __hidp_send_ctrl_message(session, hdr, data, size); - - hidp_schedule(session); - - return err; -} - static void hidp_process_handshake(struct hidp_session *session, unsigned char param) { -- cgit v1.2.3 From 55bdeed9f67a92f184e1ddcdd722e622d9dd10c6 Mon Sep 17 00:00:00 2001 From: Sathya Perla Date: Tue, 2 Feb 2010 07:48:40 -0800 Subject: be2net: use eq-id to calculate cev-isr reg offset cev-isr reg offset for each function is better calculated using (any) eq-id alloted to that function instead of using pci-func number(which does not work in some configurations...) Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/benet/be_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 6f2633887dc3..626b76c0ebc7 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -1350,7 +1350,7 @@ static irqreturn_t be_intx(int irq, void *dev) int isr; isr = ioread32(adapter->csr + CEV_ISR0_OFFSET + - be_pci_func(adapter) * CEV_ISR_SIZE); + (adapter->tx_eq.q.id/ 8) * CEV_ISR_SIZE); if (!isr) return IRQ_NONE; -- cgit v1.2.3 From f98bfbd78c37c5946cc53089da32a5f741efdeb7 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Tue, 2 Feb 2010 15:58:48 -0800 Subject: connector: Delete buggy notification code. On Tue, Feb 02, 2010 at 02:57:14PM -0800, Greg KH (gregkh@suse.de) wrote: > > There are at least two ways to fix it: using a big cannon and a small > > one. The former way is to disable notification registration, since it is > > not used by anyone at all. Second way is to check whether calling > > process is root and its destination group is -1 (kind of priveledged > > one) before command is dispatched to workqueue. > > Well if no one is using it, removing it makes the most sense, right? > > No objection from me, care to make up a patch either way for this? Getting it is not used, let's drop support for notifications about (un)registered events from connector. Another option was to check credentials on receiving, but we can always restore it without bugs if needed, but genetlink has a wider code base and none complained, that userspace can not get notification when some other clients were (un)registered. Kudos for Sebastian Krahmer , who found a bug in the code. Signed-off-by: Evgeniy Polyakov Acked-by: Greg Kroah-Hartman Signed-off-by: David S. Miller --- drivers/connector/connector.c | 175 ------------------------------------------ include/linux/connector.h | 32 -------- 2 files changed, 207 deletions(-) diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c index f06024668f99..537c29ac4487 100644 --- a/drivers/connector/connector.c +++ b/drivers/connector/connector.c @@ -36,17 +36,6 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Evgeniy Polyakov "); MODULE_DESCRIPTION("Generic userspace <-> kernelspace connector."); -static u32 cn_idx = CN_IDX_CONNECTOR; -static u32 cn_val = CN_VAL_CONNECTOR; - -module_param(cn_idx, uint, 0); -module_param(cn_val, uint, 0); -MODULE_PARM_DESC(cn_idx, "Connector's main device idx."); -MODULE_PARM_DESC(cn_val, "Connector's main device val."); - -static DEFINE_MUTEX(notify_lock); -static LIST_HEAD(notify_list); - static struct cn_dev cdev; static int cn_already_initialized; @@ -209,54 +198,6 @@ static void cn_rx_skb(struct sk_buff *__skb) } } -/* - * Notification routing. - * - * Gets id and checks if there are notification request for it's idx - * and val. If there are such requests notify the listeners with the - * given notify event. - * - */ -static void cn_notify(struct cb_id *id, u32 notify_event) -{ - struct cn_ctl_entry *ent; - - mutex_lock(¬ify_lock); - list_for_each_entry(ent, ¬ify_list, notify_entry) { - int i; - struct cn_notify_req *req; - struct cn_ctl_msg *ctl = ent->msg; - int idx_found, val_found; - - idx_found = val_found = 0; - - req = (struct cn_notify_req *)ctl->data; - for (i = 0; i < ctl->idx_notify_num; ++i, ++req) { - if (id->idx >= req->first && - id->idx < req->first + req->range) { - idx_found = 1; - break; - } - } - - for (i = 0; i < ctl->val_notify_num; ++i, ++req) { - if (id->val >= req->first && - id->val < req->first + req->range) { - val_found = 1; - break; - } - } - - if (idx_found && val_found) { - struct cn_msg m = { .ack = notify_event, }; - - memcpy(&m.id, id, sizeof(m.id)); - cn_netlink_send(&m, ctl->group, GFP_KERNEL); - } - } - mutex_unlock(¬ify_lock); -} - /* * Callback add routing - adds callback with given ID and name. * If there is registered callback with the same ID it will not be added. @@ -276,8 +217,6 @@ int cn_add_callback(struct cb_id *id, char *name, if (err) return err; - cn_notify(id, 0); - return 0; } EXPORT_SYMBOL_GPL(cn_add_callback); @@ -295,111 +234,9 @@ void cn_del_callback(struct cb_id *id) struct cn_dev *dev = &cdev; cn_queue_del_callback(dev->cbdev, id); - cn_notify(id, 1); } EXPORT_SYMBOL_GPL(cn_del_callback); -/* - * Checks two connector's control messages to be the same. - * Returns 1 if they are the same or if the first one is corrupted. - */ -static int cn_ctl_msg_equals(struct cn_ctl_msg *m1, struct cn_ctl_msg *m2) -{ - int i; - struct cn_notify_req *req1, *req2; - - if (m1->idx_notify_num != m2->idx_notify_num) - return 0; - - if (m1->val_notify_num != m2->val_notify_num) - return 0; - - if (m1->len != m2->len) - return 0; - - if ((m1->idx_notify_num + m1->val_notify_num) * sizeof(*req1) != - m1->len) - return 1; - - req1 = (struct cn_notify_req *)m1->data; - req2 = (struct cn_notify_req *)m2->data; - - for (i = 0; i < m1->idx_notify_num; ++i) { - if (req1->first != req2->first || req1->range != req2->range) - return 0; - req1++; - req2++; - } - - for (i = 0; i < m1->val_notify_num; ++i) { - if (req1->first != req2->first || req1->range != req2->range) - return 0; - req1++; - req2++; - } - - return 1; -} - -/* - * Main connector device's callback. - * - * Used for notification of a request's processing. - */ -static void cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp) -{ - struct cn_ctl_msg *ctl; - struct cn_ctl_entry *ent; - u32 size; - - if (msg->len < sizeof(*ctl)) - return; - - ctl = (struct cn_ctl_msg *)msg->data; - - size = (sizeof(*ctl) + ((ctl->idx_notify_num + - ctl->val_notify_num) * - sizeof(struct cn_notify_req))); - - if (msg->len != size) - return; - - if (ctl->len + sizeof(*ctl) != msg->len) - return; - - /* - * Remove notification. - */ - if (ctl->group == 0) { - struct cn_ctl_entry *n; - - mutex_lock(¬ify_lock); - list_for_each_entry_safe(ent, n, ¬ify_list, notify_entry) { - if (cn_ctl_msg_equals(ent->msg, ctl)) { - list_del(&ent->notify_entry); - kfree(ent); - } - } - mutex_unlock(¬ify_lock); - - return; - } - - size += sizeof(*ent); - - ent = kzalloc(size, GFP_KERNEL); - if (!ent) - return; - - ent->msg = (struct cn_ctl_msg *)(ent + 1); - - memcpy(ent->msg, ctl, size - sizeof(*ent)); - - mutex_lock(¬ify_lock); - list_add(&ent->notify_entry, ¬ify_list); - mutex_unlock(¬ify_lock); -} - static int cn_proc_show(struct seq_file *m, void *v) { struct cn_queue_dev *dev = cdev.cbdev; @@ -437,11 +274,8 @@ static const struct file_operations cn_file_ops = { static int __devinit cn_init(void) { struct cn_dev *dev = &cdev; - int err; dev->input = cn_rx_skb; - dev->id.idx = cn_idx; - dev->id.val = cn_val; dev->nls = netlink_kernel_create(&init_net, NETLINK_CONNECTOR, CN_NETLINK_USERS + 0xf, @@ -457,14 +291,6 @@ static int __devinit cn_init(void) cn_already_initialized = 1; - err = cn_add_callback(&dev->id, "connector", &cn_callback); - if (err) { - cn_already_initialized = 0; - cn_queue_free_dev(dev->cbdev); - netlink_kernel_release(dev->nls); - return -EINVAL; - } - proc_net_fops_create(&init_net, "connector", S_IRUGO, &cn_file_ops); return 0; @@ -478,7 +304,6 @@ static void __devexit cn_fini(void) proc_net_remove(&init_net, "connector"); - cn_del_callback(&dev->id); cn_queue_free_dev(dev->cbdev); netlink_kernel_release(dev->nls); } diff --git a/include/linux/connector.h b/include/linux/connector.h index 72ba63eb83c5..3a779ffba60b 100644 --- a/include/linux/connector.h +++ b/include/linux/connector.h @@ -24,9 +24,6 @@ #include -#define CN_IDX_CONNECTOR 0xffffffff -#define CN_VAL_CONNECTOR 0xffffffff - /* * Process Events connector unique ids -- used for message routing */ @@ -75,30 +72,6 @@ struct cn_msg { __u8 data[0]; }; -/* - * Notify structure - requests notification about - * registering/unregistering idx/val in range [first, first+range]. - */ -struct cn_notify_req { - __u32 first; - __u32 range; -}; - -/* - * Main notification control message - * *_notify_num - number of appropriate cn_notify_req structures after - * this struct. - * group - notification receiver's idx. - * len - total length of the attached data. - */ -struct cn_ctl_msg { - __u32 idx_notify_num; - __u32 val_notify_num; - __u32 group; - __u32 len; - __u8 data[0]; -}; - #ifdef __KERNEL__ #include @@ -151,11 +124,6 @@ struct cn_callback_entry { u32 seq, group; }; -struct cn_ctl_entry { - struct list_head notify_entry; - struct cn_ctl_msg *msg; -}; - struct cn_dev { struct cb_id id; -- cgit v1.2.3