summaryrefslogtreecommitdiff
path: root/arch/mips/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2018-09-05MIPS: Always use -march=<arch>, not -<arch> shortcutsPaul Burton1-8/+4
commit 344ebf09949c31bcb8818d8458b65add29f1d67b upstream. The VDSO Makefile filters CFLAGS to select a subset which it uses whilst building the VDSO ELF. One of the flags it allows through is the -march= flag that selects the architecture/ISA to target. Unfortunately in cases where CONFIG_CPU_MIPS32_R{1,2}=y and the toolchain defaults to building for MIPS64, the main MIPS Makefile ends up using the short-form -<arch> flags in cflags-y. This is because the calls to cc-option always fail to use the long-form -march=<arch> flag due to the lack of an -mabi=<abi> flag in KBUILD_CFLAGS at the point where the cc-option function is executed. The resulting GCC invocation is something like: $ mips64-linux-gcc -Werror -march=mips32r2 -c -x c /dev/null -o tmp cc1: error: '-march=mips32r2' is not compatible with the selected ABI These short-form -<arch> flags are dropped by the VDSO Makefile's filtering, and so we attempt to build the VDSO without specifying any architecture. This results in an attempt to build the VDSO using whatever the compiler's default architecture is, regardless of whether that is suitable for the kernel configuration. One encountered build failure resulting from this mismatch is a rejection of the sync instruction if the kernel is configured for a MIPS32 or MIPS64 r1 or r2 target but the toolchain defaults to an older architecture revision such as MIPS1 which did not include the sync instruction: CC arch/mips/vdso/gettimeofday.o /tmp/ccGQKoOj.s: Assembler messages: /tmp/ccGQKoOj.s:273: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:329: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:520: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:714: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1009: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1066: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1114: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1279: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1334: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1374: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1459: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1514: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1814: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:2002: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:2066: Error: opcode not supported on this processor: mips1 (mips1) `sync' make[2]: *** [scripts/Makefile.build:318: arch/mips/vdso/gettimeofday.o] Error 1 make[1]: *** [scripts/Makefile.build:558: arch/mips/vdso] Error 2 make[1]: *** Waiting for unfinished jobs.... This can be reproduced for example by attempting to build pistachio_defconfig using Arnd's GCC 8.1.0 mips64 toolchain from kernel.org: https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.1.0/x86_64-gcc-8.1.0-nolibc-mips64-linux.tar.xz Resolve this problem by using the long-form -march=<arch> in all cases, which makes it through the arch/mips/vdso/Makefile's filtering & is thus consistently used to build both the kernel proper & the VDSO. The use of cc-option to prefer the long-form & fall back to the short-form flags makes no sense since the short-form is just an abbreviation for the also-supported long-form in all GCC versions that we support building with. This means there is no case in which we have to use the short-form -<arch> flags, so we can simply remove them. The manual redefinition of _MIPS_ISA is removed naturally along with the use of the short-form flags that it accompanied, and whilst here we remove the separate assembler ISA selection. I suspect that both of these were only required due to the mips32 vs mips2 mismatch that was introduced by commit 59b3e8e9aac6 ("[MIPS] Makefile crapectomy.") and fixed but not cleaned up by commit 9200c0b2a07c ("[MIPS] Fix Makefile bugs for MIPS32/MIPS64 R1 and R2."). I've marked this for backport as far as v4.4 where the MIPS VDSO was introduced. In earlier kernels there should be no ill effect to using the short-form flags. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.4+ Reviewed-by: James Hogan <jhogan@kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/19579/ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-06MIPS: Add DWARF unwinding to assemblyCorey Minyard1-0/+4
This will allow kdump dumps to work correclty with MIPS and future DWARF unwinding of the stack to give accurate tracebacks. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16990/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-30MIPS: Prevent direct use of generic_defconfigPaul Burton1-0/+13
Using generic_defconfig directly is unlikely to be what a user actually wants to do - it doesn't specify any particular ISA revision & it doesn't enable any board or driver support, resulting in a largely useless kernel. Prevent users from using it directly, printing a helpful message to point them in the right direction if they attempt to. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16946/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-30MIPS: generic: Allow filtering enabled boards by requirementsPaul Burton1-2/+8
Up until now when configuring a generic kernel all board config fragments have been merged by default unless boards are explicitly selected by the user specifying BOARDS=. In many cases this is sub-optimal, since some boards don't make sense to include in some kernels. For example the MIPS SEAD-3 development board has only ever been used with 32 bit CPUs, so including support for the SEAD-3 in a 64 bit kernel is wasteful. This patch introduces support for specifying requirements in board config fragments, using comments formatted like so: # require CONFIG_BLA=y For example the SEAD-3 board could specify that it should only be merged for 32 bit kernels using a requirement line like the following: # require CONFIG_32BIT=y A new generic-board-config.sh script is introduced to handle selecting the board config fragments to merge & calling merge_config.sh to merge them. In order to allow requirements to check Kconfig symbols that are implicitly selected, rather than explicitly specified by generic_defconfig or one of the ISA config fragments, an intermediate .config file is saved & used as a reference when checking requirements. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16943/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-29MIPS: Allow platform to specify multiple its.S filesPaul Burton1-1/+2
In preparation for splitting arch/mips/generic/vmlinux.its.S into multiple files such that it doesn't become a conflict magnet as boards are added, allow platforms to specify a list of image tree source files which will be concatenated to form the final source used to build the image tree. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16938/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-29MIPS: Remove unused R6000 supportPaul Burton1-1/+0
The kernel contains a small amount of incomplete code aimed at supporting old R6000 CPUs. This is: - Unused, as no machine selects CONFIG_SYS_HAS_CPU_R6000. - Broken, since there are glaring errors such as r6000_fpu.S moving the FCSR register to t1, then ignoring it & instead saving t0 into struct sigcontext... - A maintenance headache, since it's code that nobody can test which nevertheless imposes constraints on code which it shares with other machines. Remove this incomplete & broken R6000 CPU support in order to clean up and in preparation for changes which will no longer need to consider dragging the pretense of R6000 support along with them. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16236/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-08MIPS: Set ISA bit in entry-y for microMIPS kernelsPaul Burton1-1/+14
When building a kernel for the microMIPS ISA, ensure that the ISA bit (ie. bit 0) in the entry address is set. Otherwise we may include an entry address in images which bootloaders will jump to as MIPS32 code. I originally tried using "objdump -f" to obtain the entry address, which works for microMIPS but it always outputs a 32 bit address for a 32 bit ELF whilst nm will sign extend to 64 bit. That matters for systems where we might want to run a MIPS32 kernel on a MIPS64 CPU & load it with a MIPS64 bootloader, which would then jump to a non-canonical (non-sign-extended) address. This works in all cases as it only changes the behaviour for microMIPS kernels, but isn't the prettiest solution. A possible alternative would be to write a custom tool to just extract, sign extend & print the entry point of an ELF executable. I'm open to feedback if that would be preferred. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16950/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-29MIPS: build: Fix "-modd-spreg" switch usage when compiling for mips32r6Miodrag Dinic1-1/+1
Add "-modd-spreg" when compiling the kernel for mips32r6 target. This makes sure the kernel builds properly even with toolchains that use "-mno-odd-spreg" by default. This is the case with Android gcc. Prior to this patch, kernel builds using gcc for Android failed with following error messages, if target architecture is set to mips32r6: arch/mips/kernel/r4k_switch.S: Assembler messages: .../r4k_switch.S:210: Error: float register should be even, was 1 .../r4k_switch.S:212: Error: float register should be even, was 3 .../r4k_switch.S:214: Error: float register should be even, was 5 .../r4k_switch.S:216: Error: float register should be even, was 7 .../r4k_switch.S:218: Error: float register should be even, was 9 .../r4k_switch.S:220: Error: float register should be even, was 11 .../r4k_switch.S:222: Error: float register should be even, was 13 .../r4k_switch.S:224: Error: float register should be even, was 15 .../r4k_switch.S:226: Error: float register should be even, was 17 .../r4k_switch.S:228: Error: float register should be even, was 19 .../r4k_switch.S:230: Error: float register should be even, was 21 .../r4k_switch.S:232: Error: float register should be even, was 23 .../r4k_switch.S:234: Error: float register should be even, was 25 .../r4k_switch.S:236: Error: float register should be even, was 27 .../r4k_switch.S:238: Error: float register should be even, was 29 .../r4k_switch.S:240: Error: float register should be even, was 31 make[2]: *** [arch/mips/kernel/r4k_switch.o] Error 1 Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Cc: James.Hogan@imgtec.com Cc: Paul.Burton@imgtec.com Cc: Raghu.Gandham@imgtec.com Cc: Leonid.Yegoshin@imgtec.com Cc: Douglas.Leung@imgtec.com Cc: Petar.Jovanovic@imgtec.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-04-11MIPS: generic: fix out-of-tree defconfig target buildsMarcin Nowakowski1-3/+3
When specifying a generic defconfig target with O=... option set, make is invoked in the output location before a target makefile wrapper is created. Ensure that the correct makefile is used by specifying the kernel source makefile during make invocation. This fixes the either of the following errors: $ make sead3_defoncifg ARCH=mips O=test make[1]: Entering directory '/mnt/ssd/MIPS/linux-next/test' make[2]: *** No rule to make target '32r2el_defconfig'. Stop. arch/mips/Makefile:506: recipe for target 'sead3_defconfig' failed make[1]: *** [sead3_defconfig] Error 2 make[1]: Leaving directory '/mnt/ssd/MIPS/linux-next/test' Makefile:152: recipe for target 'sub-make' failed make: *** [sub-make] Error 2 $ make 32r2el_defconfig ARCH=mips O=test make[1]: Entering directory '/mnt/ssd/MIPS/linux-next/test' Using ../arch/mips/configs/generic_defconfig as base Merging ../arch/mips/configs/generic/32r2.config Merging ../arch/mips/configs/generic/el.config Merging ../arch/mips/configs/generic/board-sead-3.config ! ! merged configuration written to .config (needs make) ! make[2]: *** No rule to make target 'olddefconfig'. Stop. arch/mips/Makefile:489: recipe for target '32r2el_defconfig' failed make[1]: *** [32r2el_defconfig] Error 2 make[1]: Leaving directory '/mnt/ssd/MIPS/linux-next/test' Makefile:152: recipe for target 'sub-make' failed make: *** [sub-make] Error 2 Fixes: eed0eabd12ef ('MIPS: generic: Introduce generic DT-based board support') Fixes: 3f5f0a4475e1 ('MIPS: generic: Convert SEAD-3 to a generic board') Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15464/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-02-14MIPS: Disable stack checks on MIPS kernelsJoshua Kinard1-0/+15
Disable stack checking on MIPS kernels. Some distribution toolchains might pass the -fstack-check option to gcc. This results in a store-doubleword instruction being emitted at the top of all functions that checks the available stack space. E.g., a80000000001d740 <per_cpu_init>: a80000000001d740: ffa0bfc0 sd zero,-16448(sp) a80000000001d744: 2405ffc9 li a1,-55 a80000000001d748: 67bdffc0 daddiu sp,sp,-64 Generally, this is undesirable, and especially on the SGI IP27 platform, it will trigger a NULL pointer dereference in '_raw_spin_lock_irq' during early init. Signed-off-by: Joshua Kinard <kumba@gentoo.org> Suggested-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15132/ Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-01-25MIPS: 'make -s' should be silentArnd Bergmann1-2/+2
A clean mips64 build produces no output except for two lines: Checking missing-syscalls for N32 Checking missing-syscalls for O32 On other architectures, there is no output at all, so let's do the same here for the sake of build testing. The 'kecho' macro is used to print the message on a normal build but skip it with 'make -s'. Fixes: e48ce6b8df5b ("[MIPS] Simplify missing-syscalls for N32 and O32") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15040/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: Use Makefile.postlink to insert relocations into vmlinuxMatt Redfearn1-12/+0
When relocatable support for MIPS was merged, there was no support for an architecture to add a postlink step for vmlinux. This meant that only invoking a target within the boot directory, such as uImage, caused the relocations to be inserted into vmlinux. Building just the vmlinux target would result in a relocatable kernel with no relocation information present. Commit fbe6e37dab97 ("kbuild: add arch specific post-link Makefile") recified this situation, so MIPS can now define a postlink step to add relocation information into vmlinux, and remove the additional steps tacked onto boot targets. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Tested-by: Steven J. Hill <steven.hill@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14554/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: zboot: Add "uzImage.bin" targetMaarten ter Huurne1-0/+4
uzImage.bin is vmlinuz.bin wrapped in a legacy U-Boot image. Since the extraction code is inside the image, it does not depend on the boot loader to extract the kernel. Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Cc: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14473/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-11-04MIPS: Fix build of compressed imageMatt Redfearn1-1/+1
Changes introduced to arch/mips/Makefile for the generic kernel resulted in build errors when making a compressed image if platform-y has multiple values, like this: make[2]: *** No rule to make target `alchemy/'. make[1]: *** [vmlinuz] Error 2 make[1]: Target `_all' not remade because of errors. make: *** [sub-make] Error 2 make: Target `_all' not remade because of errors. Fix this by quoting $(platform-y) as it is passed to the Makefile in arch/mips/boot/compressed/Makefile Reported-by: kernelci.org bot <bot@kernelci.org> Link: https://storage.kernelci.org/next/next-20161017/mips-gpr_defconfig/build.log Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14405/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06MIPS: generic: Convert SEAD-3 to a generic boardPaul Burton1-0/+13
Convert the MIPS SEAD-3 board support to be a generic board, supported by generic kernels. Because the SEAD-3 boot protocol was defined long ago and we don't want to force a switch to the UHI protocol, SEAD-3 is added as a legacy board which is detected by reading the REVISION register. This may technically not be a valid memory read & future work will include attempting to handle that gracefully. In practice since SEAD-3 is the only legacy board supported by the generic kernel so far the read will only happen on SEAD-3 boards, and even once Malta is converted the same REVISION register exists there too. Other boards such as Boston, Ci20 & Ci40 will use the UHI boot protocol & thus not run any of the legacy board detect functions. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14354/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06MIPS: generic: Introduce generic DT-based board supportPaul Burton1-0/+56
Introduce a "generic" platform, which aims to be board-agnostic by making use of device trees passed by the boot protocol defined in the MIPS UHI (Universal Hosting Interface) specification. Provision is made for supporting boards which use a legacy boot protocol that can't be changed, but adding support for such boards or any others is left to followon patches. Right now the built kernels expect to be loaded to 0x80100000, ie. in kseg0. This is fine for the vast majority of MIPS platforms, but nevertheless it would be good to remove this limitation in the future by mapping the kernel via the TLB such that it can be loaded anywhere & map itself appropriately. Configuration is handled by dynamically generating configs using scripts/kconfig/merge_config.sh, somewhat similar to the way powerpc makes use of it. This allows for variations upon the configuration, eg. differing architecture revisions or subsets of driver support for differing boards, to be handled without having a large number of defconfig files. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14353/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06MIPS: Support generating Flattened Image Trees (.itb)Paul Burton1-1/+7
Add support for generating kernel images in the Flattened Image Tree (.itb) format as supported by U-Boot. This format is essentially a Flattened Device Tree binary containing images (kernels, DTBs, ramdisks) and configurations which link those images together. The big advantages of FIT images over the uImage format are: - We can include FDTs in the kernel image in a way that the bootloader can extract it & manipulate it before providing it to the kernel. Thus we can ship FDTs as part of the kernel giving us the advantages of being able to develop & maintain the DT within the kernel tree, but also have the benefits of the bootloader being able to manipulate the FDT. Example uses for this would be to inject the kernel command line into the chosen node, or to fill in the correct memory size. - We can include multiple configurations in a single kernel image. This means that a single FIT image can, given appropriate bootloaders, be booted on different boards with the bootloader selecting an appropriate configuration & providing the correct FDT to the kernel. - We can support a multitude of hashes over the data. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14352/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-13MIPS: Remove compact branch policy Kconfig entriesPaul Burton1-4/+0
Commit c1a0e9bc885d ("MIPS: Allow compact branch policy to be changed") added Kconfig entries allowing for the compact branch policy used by the compiler for MIPSr6 kernels to be specified. This can be useful for debugging, particularly in systems where compact branches have recently been introduced. Unfortunately mainline gcc 5.x supports MIPSr6 but not the -mcompact-branches compiler flag, leading to MIPSr6 kernels failing to build with gcc 5.x with errors such as: mipsel-linux-gnu-gcc: error: unrecognized command line option '-mcompact-branches=optimal' make[2]: *** [kernel/bounds.s] Error 1 Fixing this by hiding the Kconfig entry behind another seems to be more hassle than it's worth, as MIPSr6 & compact branches have been around for a while now and if policy does need to be set for debug it can be done easily enough with KCFLAGS. Therefore remove the compact branch policy Kconfig entries & their handling in the Makefile. This reverts commit c1a0e9bc885d ("MIPS: Allow compact branch policy to be changed"). Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: c1a0e9bc885d ("MIPS: Allow compact branch policy to be changed") Cc: stable <stable@vger.kernel.org> # v4.4+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14241/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-17MIPS: Fix VZ probe gas errors with binutils <2.24James Hogan1-0/+2
The VZ guest register & TLB access macros introduced in commit "MIPS: Add guest CP0 accessors" use VZ ASE specific instructions that aren't understood by versions of binutils prior to 2.24. Add a check for whether the toolchain supports the -mvirt option, similar to the MSA toolchain check, and implement the accessors using .word if not. Due to difficulty in converting compiler specified registers (e.g. "$3") to usable numbers (e.g. "3") in inline asm, we need to copy to/from a temporary register, namely the assembler temporary (at/$1), and specify guest CP0 registers numerically in the gc0 macros. Fixes: 7eb91118227d ("MIPS: Add guest CP0 accessors") Signed-off-by: James Hogan <james.hogan@imgtec.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: linux-next@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13255/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Generate relocation table when CONFIG_RELOCATABLEMatt Redfearn1-0/+16
When CONFIG_RELOCATABLE is enabled (added in later patch) add --emit-relocs to vmlinux LDFLAGS so that fully linked vmlinux contains relocation information. Run the previously added relocs tool to fill in the .data.relocs section of vmlinux with a table of relocations. The relocs tool will also remove (mark as 0 length) the relocation sections added to vmlinux. When vmlinux is passed to the boot makefile for conversion into a boot image the now empty relocation sections will be removed and the populated relocation table will be included in the binary image. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kernel-hardening@lists.openwall.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12983/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: tools: Build relocs toolMatt Redfearn1-0/+4
Build the relocs tool as part of the kbuild Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: kernel-hardening@lists.openwall.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12980/ Patchwork: https://patchwork.linux-mips.org/patch/13242/ Patchwork: https://patchwork.linux-mips.org/patch/13233/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-22MIPS: Loongson-3: Improve -march option and move it to PlatformHuacai Chen1-10/+0
If GCC >= 4.9 and Binutils >=2.25, we use -march=loongson3a, otherwise we use -march=mips64r2, this can slightly improve performance. Besides, arch/mips/loongson64/Platform is a better location rather than arch/ mips/Makefile. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12161/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-26MIPS: Allow compact branch policy to be changedPaul Burton1-0/+4
When debugging it can be helpful to change the policy for compiler use of MIPSr6 compact branches, in order to rule out or home in on their involvement in bugs. Allow the GCC -mcompact-branches= flag to be set via Kconfig under the "Kernel hacking" menu. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11178/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-14MIPS: SB1: Remove support for Pass 1 parts.Ralf Baechle1-7/+0
Pass 1 parts had a number of significant erratas and were only available in small numbers and under NDA. Full support also required the use of a special toolchain that kept branches properly aligned. These workarounds were never upstreamed and the only toolchain known to have them is Montavista's GCC 3.0-based toolchain which completly obsoleted if not useless these days. So now that automated testing has tripped over the user of the -msb1-pass1-workarounds option, rather than fixing it remove support for pass 1 parts. Probably nobody will notice. I seem to own the last know pass 1 board and I haven't noticed another one in the wild in the past decade, at least. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-05-12MIPS: Fix wrong CHECKFLAGS (sparse builds) with GCC 5.1Aaro Koskinen1-1/+1
GCC 5.1 defines __REGISTER_PREFIX__ to $. This will break sparse command line (and build fails with: /bin/sh: syntax error: unexpected "(") since make tries to expand starting with the dollar sign with a make variable. Prevent that by using double dollar sign. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10025/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-17Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-5/+16
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for Linux 4.1. Most noteworthy: - Add more Octeon-optimized crypto functions - Octeon crypto preemption and locking fixes - Little endian support for Octeon - Use correct CSR to soft reset Octeons - Support LEDs on the Octeon-based DSR-1000N - Fix PCI interrupt mapping for the Octeon-based DSR-1000N - Mark prom_free_prom_memory() as __init for a number of systems - Support for Imagination's Pistachio SOC. This includes arch and CLK bits. I'd like to merge pinctrl bits later - Improve parallelism of csum_partial for certain pipelines - Organize DTB files in subdirs like other architectures - Implement read_sched_clock for all MIPS platforms other than Octeon - Massive series of 38 fixes and cleanups for the FPU emulator / kernel - Further FPU remulator work to support new features. This sits on a separate branch which also has been pulled into the 4.1 KVM branch - Clean up and fixes for the SEAD3 eval board; remove unused file - Various updates for Netlogic platforms - A number of small updates for Loongson 3 platforms - Increase the memory limit for ATH79 platforms to 256MB - A fair number of fixes and updates for BCM47xx platforms - Finish the implementation of XPA support - MIPS FDC support. No, not floppy controller but Fast Debug Channel :) - Detect the R16000 used in SGI legacy platforms - Fix Kconfig dependencies for the SSB bus support" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (265 commits) MIPS: Makefile: Fix MIPS ASE detection code MIPS: asm: elf: Set O32 default FPU flags MIPS: BCM47XX: Fix detecting Microsoft MN-700 & Asus WL500G MIPS: Kconfig: Disable SMP/CPS for 64-bit MIPS: Hibernate: flush TLB entries earlier MIPS: smp-cps: cpu_set FPU mask if FPU present MIPS: lose_fpu(): Disable FPU when MSA enabled MIPS: ralink: add missing symbol for RALINK_ILL_ACC MIPS: ralink: Fix bad config symbol in PCI makefile. SSB: fix Kconfig dependencies MIPS: Malta: Detect and fix bad memsize values Revert "MIPS: Avoid pipeline stalls on some MIPS32R2 cores." MIPS: Octeon: Delete override of cpu_has_mips_r2_exec_hazard. MIPS: Fix cpu_has_mips_r2_exec_hazard. MIPS: kernel: entry.S: Set correct ISA level for mips_ihb MIPS: asm: spinlock: Fix addiu instruction for R10000_LLSC_WAR case MIPS: r4kcache: Use correct base register for MIPS R6 cache flushes MIPS: Kconfig: Fix typo for the r2-to-r6 emulator kernel parameter MIPS: unaligned: Fix regular load/store instruction emulation for EVA MIPS: unaligned: Surround load/store macros in do {} while statements ...
2015-04-13Merge branch '4.0-fixes' into mips-for-linux-nextRalf Baechle1-4/+10
2015-04-10MIPS: Makefile: Fix MIPS ASE detection codeMarkos Chandras1-4/+10
Commit 32098ec7bcba ("MIPS: Makefile: Move the ASEs checks after setting the core's CFLAGS") re-arranged the MIPS ASE detection code and also added the current cflags to the detection logic. However, this introduced a few bugs. First of all, the mips-cflags should not be quoted since that ends up being passed as a string to subsequent commands leading to broken detection from the cc-option-* tools. Moreover, in order to avoid duplicating the cflags-y because of how cc-option works, we rework the logic so we pass only those cflags which are needed by the selected ASE. Finally, fix some typos resulting in MSA not being detected correctly. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Fixes: Commit 32098ec7bcba ("MIPS: Makefile: Move the ASEs checks after setting the core's CFLAGS") Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9661/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-02kbuild: use relative path more to include MakefileMasahiro Yamada1-1/+1
Prior to this commit, it was impossible to use relative path to include Makefiles from the top level Makefile because the option "--include-dir=$(srctree)" becomes effective when Make enters into sub Makefiles. To use relative path in any places, this commit moves the option above the "sub-make" target. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-04-01MIPS: Add dtbs_install targetAndrew Bresticker1-0/+5
Add the dtbs_install Makefile target to install the dtb files into $INSTALL_DTBS_PATH. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Tested-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8836/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: Move device-trees into vendor sub-directoriesAndrew Bresticker1-1/+1
Move the MIPS device-trees into the appropriate vendor sub-directories. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Tested-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8835/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: boot: Provide more uImage optionsMarkos Chandras1-0/+8
Allow more compression algorithms as well as uncompressed uImage.bin to be generated. An uncompressed image might be useful to rule out problems in the decompression code in the bootloader or even speed up the boot process at the expense of a bigger uImage file. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9271/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-19Merge branch 'mipsr6-for-3.20' of ↵Ralf Baechle1-0/+2
git://git.linux-mips.org/pub/scm/mchandras/linux into mips-for-linux-next
2015-02-19MIPS: Makefile: Move the ASEs checks after setting the core's CFLAGSMarkos Chandras1-18/+17
We need to check the ASEs support against the core's CFLAGS instead of depending to the default -march option from the toolchain. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9180/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-19MIPS: Makefile: Pass -march option on Loongson3A coresRalf Baechle1-0/+10
The loongson 3A cores do not select a suitable -march option so the build system uses the default one from the toolchain. This may or may not be suitable for a loongson 3A build. In order to avoid that, we explicitly set a suitable -march option for that core. Furthermore, some very old compilers don't support -march= at all and there is the possibility of toolchain combinations such as GCC 4.9 and binutils 2.24 for which -march=loongson3a will result in MIPS64 R2 code being generated but then rejected by GAS. So treat the Longsoon 3A as an R2 CPU. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-16MIPS: Add build support for the MIPS R6 ISALeonid Yegoshin1-0/+2
Add build support for the latest revision (R6) of the MIPS ISA. microMIPS is not yet supported. Link: http://www.linux-mips.org/archives/linux-mips/2015-01/msg00386.html Cc: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-16MIPS: Makefile: Move the ASEs checks after setting the core's CFLAGSMarkos Chandras1-18/+17
We need to check the ASEs support against the core's CFLAGS instead of depending to the default -march option from the toolchain. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9180/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: IP22/IP32: Add line to arch/mips/Makefile archhelp about vmlinux.32Joshua Kinard1-0/+1
Building a 64bit kernel for the SGI O2 (IP32) and the SGI Indy (IP22) uses the 'vmlinux.32' target, which converts the output 64-bit 'vmlinux' image into a 32-bit wrapped image. This is needed for certain revisions of the IP22 and IP32 ARCS PROMs to boot correctly, but this target is missing from the 'archhelp' info that is emitted by 'make help'. Signed-off-by: Joshua Kinard <kumba@gentoo.org> Cc: Linux MIPS List <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7991/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-07MIPS: Fix build with binutils 2.24.51+Manuel Lauss1-0/+9
Starting with version 2.24.51.20140728 MIPS binutils complain loudly about mixing soft-float and hard-float object files, leading to this build failure since GCC is invoked with "-msoft-float" on MIPS: {standard input}: Warning: .gnu_attribute 4,3 requires `softfloat' LD arch/mips/alchemy/common/built-in.o mipsel-softfloat-linux-gnu-ld: Warning: arch/mips/alchemy/common/built-in.o uses -msoft-float (set by arch/mips/alchemy/common/prom.o), arch/mips/alchemy/common/sleeper.o uses -mhard-float To fix this, we detect if GAS is new enough to support "-msoft-float" command option, and if it does, we can let GCC pass it to GAS; but then we also need to sprinkle the files which make use of floating point registers with the necessary ".set hardfloat" directives. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: Markos Chandras <Markos.Chandras@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/8355/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-09-22MIPS: Add support for building device-tree binariesAndrew Bresticker1-0/+5
Add a 'dtbs' Makefile target that just builds the device-tree binaries enabled by the configuration. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: David Daney <david.daney@cavium.com> Cc: John Crispin <blogic@openwrt.org> Cc: Jayachandran C <jchandra@broadcom.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7557/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-09-22MIPS: Create common infrastructure for building built-in device-treesAndrew Bresticker1-0/+6
In preparation for moving the device-trees to a common location, introduce the config option BUILTIN_DTB, which can be selected by platforms that use a device-tree built into the kernel image, and create a Makefile to build the device-trees in arch/mips/boot/dts/. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: David Daney <david.daney@cavium.com> Cc: John Crispin <blogic@openwrt.org> Cc: Jayachandran C <jchandra@broadcom.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7564/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-09-17MIPS: SmartMIPS: Disable assembler warningsMarkos Chandras1-1/+10
The kernel code overrides the default ISA as passed by the compiler in quite a few places. This has unfortunate side effects when smartmips is enabled leading to hundreds of warnings during build such as: {standard input}: Assembler messages: {standard input}:411: Warning: the `smartmips' extension requires MIPS32 revision 1 or greater {standard input}: Assembler messages: {standard input}:43: Warning: the 64-bit MIPS architecture does not support the `smartmips' extension [...] Until the kernel code is fixed properly (if possible), disable all the assembler warning messages to make the build logs readable again. This has no runtime side effects but it makes it easier to spot more critical warnings and problems during build. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7356/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30MIPS: SB1: Check optional compilation flags one by oneMaciej W. Rozycki1-1/+3
This fixes a regression caused by commit bb6c0bd3fdb67c8a1fceea1d4700b9ee593309f9 [MIPS: SB1: Fix excessive kernel warnings.], that makes `-march=r5000' selected for compilation flags rather than supposed `-march=sb1' with compilers that do not support the ASE selection flags introduced with that change. For example GCC 4.1.2 supports `-mips3d'/`-mno-mips3d' (and obviously `-march=sb1'), however it does not support `-mdmx'/`-mno-mdmx'. As a result the whole selection of flags fails and compilation resorts to using `-march=r5000', meant for really old compilers indeed only. It is always best to pick the flags individually unless we are absolutely sure a set of flags was introduced to the toolchain together (`-march=sb1' and `-mtune=sb1' would be a good example), and this change makes it happen for CONFIG_CPU_SB1. Consequently the flags ultimately selected with GCC 4.1.2 are `-march=sb1 -Wa,--trap -mno-mips3d' Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Richard Sandiford <rdsandiford@googlemail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7223/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-04Merge branch '3.15-fixes' into mips-for-linux-nextRalf Baechle1-2/+2
2014-06-03MIPS: Fix MSA toolchain support detection.Steven J. Hill1-1/+1
The '-mmsa' option is not supported by all current compilers. Change the detection to instead pass the option directly to the assembler. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Reviewed-by: Paul Burton <Paul.Burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/6835/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-28MIPS: SB1: Fix excessive kernel warnings.Ralf Baechle1-1/+1
A kernel build with binutils 2.24 is going to emit warnings like CC kernel/sys.o {standard input}: Assembler messages: {standard input}:701: Warning: the 32-bit MIPS architecture does not support the `mdmx' extension {standard input}:701: Warning: the `mdmx' extension requires 64-bit FPRs {standard input}:701: Warning: the `mips3d' extension requires MIPS32 revision 2 or greater {standard input}:701: Warning: the `mips3d' extension requires 64-bit FPRs for almost every file. This is caused by changes to gas' interpretation of .set semantics. Fixed by explicitly disabling MIPS3D and MDMX for Sibyte builds. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-23MIPS: math-emu: Move various objects into an ar library.Ralf Baechle1-0/+1
ieee754d.o contains only debug code and dp_sqrt.o and sp_sqrt.o contain code which for MIPS I/II/III systems we don't want to link. Again the savings can be considerable for some systems: $ mips-linux-size --totals ieee754d.o dp_sqrt.o sp_sqrt.o text data bss dec hex filename 1624 0 0 1624 658 ieee754d.o 2016 0 0 2016 7e0 dp_sqrt.o 736 0 0 736 2e0 sp_sqrt.o 4376 0 0 4376 1118 (TOTALS) Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: Add MSA register definitions & accessPaul Burton1-0/+5
This patch introduces definitions for the MSA control registers and functions which allow access to both the control & vector registers. If the toolchain being used to build the kernel includes support for MSA then this patch will make use of that support & use MSA instructions directly. However toolchain support for MSA is very new & far from a point where it can be reasonably expected that everyone building the kernel uses a toolchain with support. Thus fallbacks using .word assembler directives are also provided for now as a temporary measure. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6429/ Patchwork: https://patchwork.linux-mips.org/patch/6607/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-30Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-1/+1
Pull MIPS updates from Ralf Baechle: "The most notable new addition inside this pull request is the support for MIPS's latest and greatest core called "inter/proAptiv". The patch series describes this core as follows. "The interAptiv is a power-efficient multi-core microprocessor for use in system-on-chip (SoC) applications. The interAptiv combines a multi-threading pipeline with a coherence manager to deliver improved computational throughput and power efficiency. The interAptiv can contain one to four MIPS32R3 interAptiv cores, system level coherence manager with L2 cache, optional coherent I/O port, and optional floating point unit." The platform specific patches touch all 3 Broadcom families. It adds support for the new Broadcom/Netlogix XLP9xx Soc, building a common BCM63XX SMP kernel for all BCM63XX SoCs regardless of core type/count and full gpio button/led descriptions for BCM47xx. The rest of the series are cleanups and bug fixes that are MIPS generic and consist largely of changes that Imgtec/MIPS had published in their linux-mti-3.10.git stable tree. Random other cleanups and patches preparing code to be merged in 3.15" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits) mips: select ARCH_MIGHT_HAVE_PC_SERIO mips: delete non-required instances of include <linux/init.h> MIPS: KVM: remove shadow_tlb code MIPS: KVM: use common EHINV aware UNIQUE_ENTRYHI mips/ide: flush dcache also if icache does not snoop dcache MIPS: BCM47XX: fix position of cpu_wait disabling MIPS: BCM63XX: select correct MIPS_L1_CACHE_SHIFT value MIPS: update MIPS_L1_CACHE_SHIFT based on MIPS_L1_CACHE_SHIFT_<N> MIPS: introduce MIPS_L1_CACHE_SHIFT_<N> MIPS: ZBOOT: gather string functions into string.c arch/mips/pci: don't check resource with devm_ioremap_resource arch/mips/lantiq/xway: don't check resource with devm_ioremap_resource bcma: gpio: don't cast u32 to unsigned long ssb: gpio: add own IRQ domain MIPS: BCM47XX: fix sparse warnings in board.c MIPS: BCM47XX: add board detection for Linksys WRT54GS V1 MIPS: BCM47XX: fix detection for some boards MIPS: BCM47XX: Enable buttons support on SSB MIPS: BCM47XX: Convert WNDR4500 to new syntax MIPS: BCM47XX: Use "timer" trigger for status LEDs ...
2014-01-23MIPS: microMIPS: Remove unsupported compiler flag.Steven J. Hill1-1/+1
Remove usage of -mno-jals compiler flag when building a pure microMIPS kernel. The -mno-jals flag only ever existed within Mentor toolchains. Dropping this flag allows all FSF toolchains to work. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6200/
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 09:45:53 +0000