Age | Commit message (Collapse) | Author | Files | Lines |
|
Reject flags that are not supported with EINVAL.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[sw0312.kim: backport from mainline to apply supplementary groups on netfilter]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Change-Id: I92f1bd37788cc71088112770bb1b4071dfe8f3fd
|
|
The XT_OWNER_SUPPL_GROUPS flag causes GIDs specified with XT_OWNER_GID
to be also checked in the supplementary groups of a process.
f_cred->group_info cannot be modified during its lifetime and f_cred
holds a reference to it so it's safe to use.
Signed-off-by: Lukasz Pawelczyk <l.pawelczyk@samsung.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[sw0312.kim: backport from mainline to apply supplementary groups on netfilter]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Change-Id: Ie2e4c64388b4c64794ebc73de9bacf206eb46173
|
|
All Exynos big.LITTLE system suffer from I-Cache line size mismatch between
CPU cores, so enable workaround for it in exynos_defconfig and
tizen_odroid_defconfig.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I0f324a5832e1ef47999f7b8d4ddd4a29db0ee176
|
|
Some big.LITTLE systems have mismatch of I-Cache line size between
LITTLE and big cores. This patch adds workaround for proper I-Cache
support on such systems. Without it, some code (typically self-modifying)
might suffer from random SIGILL failures.
Similar workaround exists for ARM64 architecture, added by commit
116c81f427ff ("arm64: Work around systems with mismatched cache line
sizes").
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I76e1cb24cde91dbfd5a16bd8d5dc97c7953767ff
|
|
Currently, hdmi connection generates only uevent by drm core. In
addition, it has no information about connection state. But, Tizen
starts TV-out behavior along with extcon uevent. To this end, this
patch will add extcon notification for hdmi connection.
Signed-off-by: Dongwoo Lee <dwoo08.lee@samsung.com>
[sw0312.kim: port to v4.14]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Change-Id: I20a2d13deff07e566ce4f50c7fc64600ce10ca9f
|
|
Tizen web engine uses squashfs for its libraray update. Enable
squashfs and related options.
Change-Id: Id9a25c46642598d0927a4304f6813dbbd64f68b1
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
|
|
Tizen web engine uses squashfs for its libraray update. Enable
squashfs and related options.
Change-Id: Id2f7640cf6007b280bb6daef3c42484e8b4a04ef
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
|
|
Our ctags mangling script can't handle newlines inside of a
DEFINE_PER_CPU(), leading to an annoying message whenever tags are
built:
ctags: Warning: drivers/clocksource/arm_arch_timer.c:302: null expansion of name pattern "\1"
This was dealt with elsewhere in commit:
25528213fe9f75f4 ("tags: Fix DEFINE_PER_CPU expansions")
... by ensuring each DEFINE_PER_CPU() was contained on a single line,
even where this would violate the usual code style (checkpatch warnings
and all).
Let's do the same for the arch timer driver, and get rid of the
distraction.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[sw0312.kim: cherry-pick mainline commit a7fb4577bbe3 to resolve warning on ctags build]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Change-Id: Id79bac4d2450f30c21b50cdf0de1be7fb3b1bbec
|
|
This fixes build error with tizen_odroid_defconfig related to missing
MTD symbols required by exynos5433-asv.c driver.
The Exynos5433 ASV driver has dependency on MTD, to avoid inheriting this
dependency by the Exynos5422 ASV driver split Exynos ASV drivers into ARM
and ARM64 parts, similarly as it is done for the PMU.
This also has an advantage that we don't need to include ARM ASV drivers on
ARM64 SoCs and we can build only ARM ASV drivers for ARM SoCs.
Change-Id: I3d647b784f936dcb535632e4ee15a7d571d7a131
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
|
|
Enable MTD_EXYNOS_OTP which is required for the ASV driver on Exynos5433.
Change-Id: I6b176856405ea38c51436e73d5aa4df80c79f6b1
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
|
|
Enable ASV driver for Exynos5433 SoC.
Change-Id: I2870b83f909425356be2391ac5e534a773cd8db8
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
|
|
This patch adds Adaptive Supply Voltage support or the Cortex A53
and the Cortex A57 clusters. There is no Adaptive Body Bias handling
added yet.
Change-Id: I07190bf3614428292594b42bb8a1fb60a7b3ae63
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
|
|
Change-Id: I8bcd9955c3cff940150bff10da564c3b9f477952
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
|
|
Extend the register region to also cover the ASV table region
and add reg entries for the ABB registers region.
Change-Id: I64704397a0cd12cb9a019b83f45fd23890da458b
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
|
|
This patch adds driver for Exynos5433 OTP memory. Access to the OTP
memory is required, among others, to support the Adaptive Supply Voltage
feature.
Partially based on code from Android SM-N910C_LL_Opensource kernel.
Change-Id: If85363f1626d622f1559757eb06fd950e214e5ab
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
|
|
This patch adds helper functions for accessing the ABB block
registers needed by the ASV driver.
Change-Id: Ida2ea622136c1abea2caffaee00b5400a8efba7d
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
|
|
Document "samsung,exynos5433-chipid" compatible and add description
of 'reg' property for Exynos5433.
Change-Id: I9f22c76aabd46ea7aa31cfbecbb64131914e9938
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
|
|
Add register read helper function needed by the ASV driver.
Change-Id: I90ec78cff58ac7ff424a50309e83d37605e7cbc7
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
|
|
Prevent disabling these clocks by the kernel until proper support
is added to the ASV driver.
With current code this patch is not necessarily required, because
exynos_asv_init() is being called before unused clocks get disabled
by clk core. However, things may break when the timings change
for any reason.
This patch has been tested after changing initcall type in exynos-asv.c:
-late_initcall(exynos_asv_init)
+late_initcall_sync(exynos_asv_init)
Change-Id: I513ff391bece219318020c0bcca07e2a7938a175
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
|
|
Log error code from devm_pm_opp_add() to make any errors easier
to debug.
Change-Id: If418320565f1efc14d16242d8b166bea07353c54
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
|
|
There is currently no check whether an OPP is actually removed before
attempting to add an replacement OPP. In situations when and OPP is
referenced when we try to remove it and it is not already removed at
the time of return from the dev_pm_opp_remove() call subsequent
dev_pm_opp_add() invocation will fail. To avoid that add a polling loop
with timeout as a barrier before adding new OPP.
This patch should also prevent related cpufreq core issues as indicated
by logs as follows.
exynos_asv_update_cpu_opp cpu4 opp5, freq: 2000 missing
exynos5433_asv_opp_get_voltage: arm,cortex-a57: [6] freq: 1900, voltage: 1262500 -> 1187500
cpu cpu4: _opp_add: duplicate OPPs detected. Existing: freq: 1900000000, volt: 1262500,
enabled: 1. New: freq: 1900000000, volt: 1187500, enabled: 1
exynos_asv_update_cpu_opp: Failed to add OPP 1900000000 Hz/1187500 uV for cpu4 (-17)
cpu cpu4: dev_pm_opp_set_rate: failed to find OPP for freq 1900000000 (-34)
exynos5433_asv_opp_get_voltage: arm,cortex-a57: [9] freq: 1600, voltage: 1137500 -> 1062500
cpufreq: __target_index: Failed to change cpu frequency: -34
Change-Id: Ibf6a568cabbd5380952d97f93d27ac59f1db125b
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
|
|
MIXER on Exynos5 SoCs uses different synchronisation method than Exynos4
to update internal state (shadow registers).
Apparently the driver implements it incorrectly. The rule should be
as follows:
- do not request updating registers until previous request was finished,
ie. MXR_CFG_LAYER_UPDATE_COUNT must be 0.
- before setting registers synchronisation on VSYNC should be turned off,
ie. MXR_STATUS_SYNC_ENABLE should be reset,
- after finishing MXR_STATUS_SYNC_ENABLE should be set again.
The patch hopefully implements it correctly.
Below sample kernel log from page fault caused by the bug:
[ 25.670038] exynos-sysmmu 14650000.sysmmu: 14450000.mixer: PAGE FAULT occurred at 0x2247b800
[ 25.677888] ------------[ cut here ]------------
[ 25.682164] kernel BUG at ../drivers/iommu/exynos-iommu.c:450!
[ 25.687971] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
[ 25.693778] Modules linked in:
[ 25.696816] CPU: 5 PID: 1553 Comm: fb-release_test Not tainted 5.0.0-rc7-01157-g5f86b1566bdd #136
[ 25.705646] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[ 25.711710] PC is at exynos_sysmmu_irq+0x1c0/0x264
[ 25.716470] LR is at lock_is_held_type+0x44/0x64
v2: added missing MXR_CFG_LAYER_UPDATE bit setting in mixer_enable_sync
Reported-by: Marian Mihailescu <mihailescu2m@gmail.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Change-Id: Idd49412e699350a7ea3a98ef7f925924e0ddf1ff
|
|
In case of interlace mode video processor registers and mixer config
register must be check to ensure internal state is in sync with shadow
registers.
This patch fixes page-faults in interlaced mode.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
[backport of mainline commit 2eced8e917b060587fc8ed46df41c364957a5050]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I8b09ed165101a7dcccd1d6e7338e0216a27f4481
|
|
ACLK400_DISP1 bus feeds some internal buses of the display subsystem, some
of which are also related to TV/Mixer hardware modules. When that bus
is set to 120MHz, Exynos Mixer is not able to properly handle two XRGB
display planes at FullHD-60MHz. DMA underrun happens, which in turn might
result in reading data out of the configured buffer, what causes IOMMU
page fault and kernel panic.
This change fixes the following IOMMU fault, observed, when 2 Mixer planes
were enabled:
exynos-sysmmu 14650000.sysmmu: 14450000.mixer: PAGE FAULT occurred at 0x20fe9000
------------[ cut here ]------------
kernel BUG at ../drivers/iommu/exynos-iommu.c:450!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 5 PID: 0 Comm: swapper/5 Not tainted 5.0.0-00003-g1b03088168ea #149
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
PC is at exynos_sysmmu_irq+0x1c0/0x264
LR is at lock_is_held_type+0x44/0x64
...
Reported-by: Marian Mihailescu <mihailescu2m@gmail.com>
Fixes: 5d99cc59a3c6 ("ARM: dts: exynos: Move Exynos5250 and Exynos5420 nodes under soc")
Fixes: b04a62d3ade3 ("ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos542x SoC")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I3d2f341f5e89d4631401f653d0ad9e36f26f45ad
|
|
rfs is set 256 as a default value in I2S module. Due to clock rate
setting rounding errors with rfs=512 playback is almost twice faster
than original speed when the device is opened with 44.1k samplerate.
pulseaudio that uses 44.1k sinks can't play the sound properly.
Change-Id: I21d5553e36dcbf00802230cf1c60f5fb7df1056d
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
|
|
After commit fbeec965b8d1c ("ASoC: samsung: odroid: Fix 32000 sample
rate handling") due to clock rounding error CODEC master clock frequency
is being set to 20070401 Hz instead of 22579000 Hz.
This results in too fast actual sample rate for fs=44100, e.g. 2 kHz tone
has really 3555 Hz frequency (2000 Hz * 20070401/22579000 * 2).
Fix this by increasing correction passed to clk_set_rate() to take into
account inaccuracy of EPLL frequency properly.
Change-Id: I8d08bec8e70394421c115bde1d511b730885bbe2
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
|
|
Add missing audio routing entry for the capture stream, this change
is required to fix audio recording on Odroid XU3.
Change-Id: I8db68ab3e097a0f3cfd07224016e4704e57c6635
Fixes: 885b005d232c ("ARM: dts: exynos: Add support for secondary DAI to Odroid XU3")
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
|
|
This patch sets missing stream_name of capture part of the DAI driver
so we can define DAPM routing properly also for the capture stream.
Fixes: 64aba9bca5bd ("ASoC: samsung: i2s: Add widgets and routes for DPCM support")
Change-Id: I7ac244afcd74d92cf92da1d9d7d9606285ea0360
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
|
|
This patch extends DAPM routing and adds secondary CPU DAI entry
to support the secondary audio PCM interface on Odroid XU4.
Change-Id: Id20d2a064f5d29c4edf349e9a968864a48a11b46
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
This patch extends DAPM routing and adds secondary CPU DAI entry
to support the secondary audio PCM interface on Odroid XU3.
Change-Id: I2efb8eca9418554482194a2c54aa6b6ca674d5c2
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
This reverts commit 00ffa8a3b1a60a89ab0ef5ae1d8e41269c30a3bd.
Change-Id: I396b1250a748fdb8219abf6d0bf71c5fab119658
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
There is now no users of this flag so remove it together with
related code. The chan_name field of snd_dmaengine_dai_dma_data
data structure is not removed as it is still in use by the PXA
platform.
Change-Id: Ia8bb6022ce7c5e85abb7c5410459130666785f45
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This addresses an issue pointed out by compiler warning:
sound/soc/samsung/odroid.c: In function ‘odroid_audio_probe’:
sound/soc/samsung/odroid.c:298:22: warning: ‘cpu_dai’ may be used
uninitialized in this function [-Wmaybe-uninitialized]
priv->clk_i2s_bus = of_clk_get_by_name(cpu_dai, "iis");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Change-Id: I39c6dd0a1aa5ec68bfc17c895988c21a1a34733e
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In odroid_audio_probe() some OF nodes are left without reference count
decrease after use. Fix it by ensuring required of_node_calls() are done
before exiting probe.
Change-Id: Ifbcb6294331acc59028e675d8ab1143394508d66
Reported-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On some SoCs (e.g. Exynos5433) there are multiple "IIS multi audio
interfaces" and the driver will try to register there multiple times
same platform device for the secondary FIFO, which of course fails
miserably. To fix this we derive the secondary platform device name
from the primary device name. The secondary device name will now
be <primary_dev_name>-sec instead of fixed "samsung-i2s-sec".
The fixed platform_device_id table entry is removed as the secondary
device name is now dynamic and device/driver matching is done through
driver_override.
Change-Id: I49ed3e20279af198cdce11c08cc11bd6536dddad
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This fixes unregistration of the secondary platform device so all
resources are properly released. Additionally the removal sequence
is corrected so it is in reverse order comparing to probe sequence.
The test against NULL priv->pdev_sec is removed as it is not necessary.
Change-Id: If325e11b4109fbc61fbb2df3ac012f2c1e9f0cb5
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With old DTS there will be missing DAPM routes linking BE with CODECs.
Add those routes in the card driver so sound works properly on Odroid
XU3/4 also without DTS updates enabling the secondary PCM.
Change-Id: I0a2a8e59859cdaf46da0563e30278dc9a8fe2376
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently when playing sound with different sample rates actual
sample rate will be determined by audio stream which starts first
on either primary or secondary PCM. The audio root clock will be
configured appropriately only for the first stream. As the hardware
is limited to same sample rate on both interfaces we need to disallow
streams with different sample rates. It is done by this patch by
returning error in FE hw_params if there is already active stream
running with different sample rate.
Change-Id: I643d02d38acf20a7711ba5930e6bceceeaafc087
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When np is NULL i2s_pdata could also be NULL but i2s_pdata is now being
dereferenced without proper check. Fix this and shorten the error message
so we don't exceed 80 characters limit.
Change-Id: I5d5b14ff953d4a2617500f50e81eb459d56a6e4f
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace GPL v2.0 license statements with SPDX license identifier.
Change-Id: Iaf0ae489d7d55dc949ba70e956afe3642cdfaeb4
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Spelling error fixes, upper/lower case letter changes.
Change-Id: Id1060cbb859c6da4480a0dd6f676a6614b64da8c
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Change-Id: I030b163708ab40f17cf500cff7a8f326b890b7f5
Addresses-Coverity-ID: 1381093 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Change indentation so this macro definition spans 2 rows and looks
more consistent with surrounding code.
Change-Id: I747acdce454a660c637d29ab34450081e02084d2
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If the probe call is on the primary DAI we can use 'other' in place of
i2s->sec_dai, if the probe call is on the secondary DAI we can use 'i2s'
in place of other->sec_dai.
While at it fix one whitespace issue.
Change-Id: Idbe9190d87f628f4d8fab77dbdbe433c8cd7825d
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This is a part of conversion of Samsung platforms to use the custom DMA
config for specifying DMA channel names, in addition to passing custom
DMA device for the secondary CPU DAI's "PCM" component for some variants
of the I2S controller.
We also don't set the SND_DMAENGINE_PCM_FLAG_CUSTOM_CHANNEL_NAME any more
as setting it wouldn't allow to specify DMA channels through the custom
DMA config.
Change-Id: Ia7e4da88746788c6fd56e1781160328bdaa224b8
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch makes the spinlock serializing access to the primary/secondary
PCM a per I2S controller lock, rather than a global one. There is no need
to have a global lock across multiple I2S controllers in the SoC.
Change-Id: I6b56296ce45e219ed5f37af85fd352ff51af617a
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds DPCM links in order to support the secondary I2S interface.
For the secondary PCM interface to be actually available one more entry
should be added to the sound-dai property in sound/cpu node in DT.
The changes in driver are done in a way so we are backwards compatible
with existing DTS/DTB, i.e. if the cpu sound-dai property contains only
one entry only one PCM will be registered.
Change-Id: I7bc789cf1d025b168fd3411f24f4015016025bb2
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The quirk flags are common for the primary and the secondary DAI
so move respective field from struct i2s_dai to common driver data
structure.
Change-Id: I27506c48b3faa8c344535c6749b534c6c11901e7
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The IP variant data is another thing common for both DAIs, move it
to the driver's common data structure.
Change-Id: Id83d14a38d6c5d0d4d25dfd0ca8332e88315d271
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As we now have the 'priv' pointer in most of the places we can use
priv->lock directly, dropping extra indirection in the SFR region
spinlock access.
Change-Id: Ic137ee120aa1871a9d2142eaee9f9292e2c0f25f
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|