diff options
Diffstat (limited to 'Documentation')
452 files changed, 14375 insertions, 3582 deletions
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index c8a8eb1a2b11..793acf999e9e 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -270,8 +270,8 @@ m68k/ - directory with info about Linux on Motorola 68k architecture. mailbox.txt - How to write drivers for the common mailbox framework (IPC). -md-cluster.txt - - info on shared-device RAID MD cluster. +md/ + - directory with info about Linux Software RAID media/ - info on media drivers: uAPI, kAPI and driver documentation. memory-barriers.txt diff --git a/Documentation/ABI/obsolete/sysfs-block-zram b/Documentation/ABI/obsolete/sysfs-block-zram deleted file mode 100644 index 720ea92cfb2e..000000000000 --- a/Documentation/ABI/obsolete/sysfs-block-zram +++ /dev/null @@ -1,119 +0,0 @@ -What: /sys/block/zram<id>/num_reads -Date: August 2015 -Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> -Description: - The num_reads file is read-only and specifies the number of - reads (failed or successful) done on this device. - Now accessible via zram<id>/stat node. - -What: /sys/block/zram<id>/num_writes -Date: August 2015 -Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> -Description: - The num_writes file is read-only and specifies the number of - writes (failed or successful) done on this device. - Now accessible via zram<id>/stat node. - -What: /sys/block/zram<id>/invalid_io -Date: August 2015 -Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> -Description: - The invalid_io file is read-only and specifies the number of - non-page-size-aligned I/O requests issued to this device. - Now accessible via zram<id>/io_stat node. - -What: /sys/block/zram<id>/failed_reads -Date: August 2015 -Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> -Description: - The failed_reads file is read-only and specifies the number of - failed reads happened on this device. - Now accessible via zram<id>/io_stat node. - -What: /sys/block/zram<id>/failed_writes -Date: August 2015 -Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> -Description: - The failed_writes file is read-only and specifies the number of - failed writes happened on this device. - Now accessible via zram<id>/io_stat node. - -What: /sys/block/zram<id>/notify_free -Date: August 2015 -Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> -Description: - The notify_free file is read-only. Depending on device usage - scenario it may account a) the number of pages freed because - of swap slot free notifications or b) the number of pages freed - because of REQ_DISCARD requests sent by bio. The former ones - are sent to a swap block device when a swap slot is freed, which - implies that this disk is being used as a swap disk. The latter - ones are sent by filesystem mounted with discard option, - whenever some data blocks are getting discarded. - Now accessible via zram<id>/io_stat node. - -What: /sys/block/zram<id>/zero_pages -Date: August 2015 -Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> -Description: - The zero_pages file is read-only and specifies number of zero - filled pages written to this disk. No memory is allocated for - such pages. - Now accessible via zram<id>/mm_stat node. - -What: /sys/block/zram<id>/orig_data_size -Date: August 2015 -Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> -Description: - The orig_data_size file is read-only and specifies uncompressed - size of data stored in this disk. This excludes zero-filled - pages (zero_pages) since no memory is allocated for them. - Unit: bytes - Now accessible via zram<id>/mm_stat node. - -What: /sys/block/zram<id>/compr_data_size -Date: August 2015 -Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> -Description: - The compr_data_size file is read-only and specifies compressed - size of data stored in this disk. So, compression ratio can be - calculated using orig_data_size and this statistic. - Unit: bytes - Now accessible via zram<id>/mm_stat node. - -What: /sys/block/zram<id>/mem_used_total -Date: August 2015 -Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> -Description: - The mem_used_total file is read-only and specifies the amount - of memory, including allocator fragmentation and metadata - overhead, allocated for this disk. So, allocator space - efficiency can be calculated using compr_data_size and this - statistic. - Unit: bytes - Now accessible via zram<id>/mm_stat node. - -What: /sys/block/zram<id>/mem_used_max -Date: August 2015 -Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> -Description: - The mem_used_max file is read/write and specifies the amount - of maximum memory zram have consumed to store compressed data. - For resetting the value, you should write "0". Otherwise, - you could see -EINVAL. - Unit: bytes - Downgraded to write-only node: so it's possible to set new - value only; its current value is stored in zram<id>/mm_stat - node. - -What: /sys/block/zram<id>/mem_limit -Date: August 2015 -Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> -Description: - The mem_limit file is read/write and specifies the maximum - amount of memory ZRAM can use to store the compressed data. - The limit could be changed in run time and "0" means disable - the limit. No limit is the initial state. Unit: bytes - Downgraded to write-only node: so it's possible to set new - value only; its current value is stored in zram<id>/mm_stat - node. diff --git a/Documentation/ABI/testing/configfs-rdma_cm b/Documentation/ABI/testing/configfs-rdma_cm index 5c389aaf5291..74f9506f42e7 100644 --- a/Documentation/ABI/testing/configfs-rdma_cm +++ b/Documentation/ABI/testing/configfs-rdma_cm @@ -20,3 +20,11 @@ Description: RDMA-CM based connections from HCA <hca> at port <port-num> will be initiated with this RoCE type as default. The possible RoCE types are either "IB/RoCE v1" or "RoCE v2". This parameter has RW access. + +What: /config/rdma_cm/<hca>/ports/<port-num>/default_roce_tos +Date: February 7, 2017 +KernelVersion: 4.11.0 +Description: RDMA-CM QPs from HCA <hca> at port <port-num> + will be created with this TOS as default. + This can be overridden by using the rdma_set_option API. + The possible RoCE TOS values are 0-255. diff --git a/Documentation/ABI/testing/sysfs-block-zram b/Documentation/ABI/testing/sysfs-block-zram index 4518d30b8c2e..451b6d882b2c 100644 --- a/Documentation/ABI/testing/sysfs-block-zram +++ b/Documentation/ABI/testing/sysfs-block-zram @@ -22,41 +22,6 @@ Description: device. The reset operation frees all the memory associated with this device. -What: /sys/block/zram<id>/num_reads -Date: August 2010 -Contact: Nitin Gupta <ngupta@vflare.org> -Description: - The num_reads file is read-only and specifies the number of - reads (failed or successful) done on this device. - -What: /sys/block/zram<id>/num_writes -Date: August 2010 -Contact: Nitin Gupta <ngupta@vflare.org> -Description: - The num_writes file is read-only and specifies the number of - writes (failed or successful) done on this device. - -What: /sys/block/zram<id>/invalid_io -Date: August 2010 -Contact: Nitin Gupta <ngupta@vflare.org> -Description: - The invalid_io file is read-only and specifies the number of - non-page-size-aligned I/O requests issued to this device. - -What: /sys/block/zram<id>/failed_reads -Date: February 2014 -Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> -Description: - The failed_reads file is read-only and specifies the number of - failed reads happened on this device. - -What: /sys/block/zram<id>/failed_writes -Date: February 2014 -Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> -Description: - The failed_writes file is read-only and specifies the number of - failed writes happened on this device. - What: /sys/block/zram<id>/max_comp_streams Date: February 2014 Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> @@ -73,74 +38,24 @@ Description: available and selected compression algorithms, change compression algorithm selection. -What: /sys/block/zram<id>/notify_free -Date: August 2010 -Contact: Nitin Gupta <ngupta@vflare.org> -Description: - The notify_free file is read-only. Depending on device usage - scenario it may account a) the number of pages freed because - of swap slot free notifications or b) the number of pages freed - because of REQ_DISCARD requests sent by bio. The former ones - are sent to a swap block device when a swap slot is freed, which - implies that this disk is being used as a swap disk. The latter - ones are sent by filesystem mounted with discard option, - whenever some data blocks are getting discarded. - -What: /sys/block/zram<id>/zero_pages -Date: August 2010 -Contact: Nitin Gupta <ngupta@vflare.org> -Description: - The zero_pages file is read-only and specifies number of zero - filled pages written to this disk. No memory is allocated for - such pages. - -What: /sys/block/zram<id>/orig_data_size -Date: August 2010 -Contact: Nitin Gupta <ngupta@vflare.org> -Description: - The orig_data_size file is read-only and specifies uncompressed - size of data stored in this disk. This excludes zero-filled - pages (zero_pages) since no memory is allocated for them. - Unit: bytes - -What: /sys/block/zram<id>/compr_data_size -Date: August 2010 -Contact: Nitin Gupta <ngupta@vflare.org> -Description: - The compr_data_size file is read-only and specifies compressed - size of data stored in this disk. So, compression ratio can be - calculated using orig_data_size and this statistic. - Unit: bytes - -What: /sys/block/zram<id>/mem_used_total -Date: August 2010 -Contact: Nitin Gupta <ngupta@vflare.org> -Description: - The mem_used_total file is read-only and specifies the amount - of memory, including allocator fragmentation and metadata - overhead, allocated for this disk. So, allocator space - efficiency can be calculated using compr_data_size and this - statistic. - Unit: bytes - What: /sys/block/zram<id>/mem_used_max Date: August 2014 Contact: Minchan Kim <minchan@kernel.org> Description: - The mem_used_max file is read/write and specifies the amount - of maximum memory zram have consumed to store compressed data. - For resetting the value, you should write "0". Otherwise, - you could see -EINVAL. + The mem_used_max file is write-only and is used to reset + the counter of maximum memory zram have consumed to store + compressed data. For resetting the value, you should write + "0". Otherwise, you could see -EINVAL. Unit: bytes What: /sys/block/zram<id>/mem_limit Date: August 2014 Contact: Minchan Kim <minchan@kernel.org> Description: - The mem_limit file is read/write and specifies the maximum - amount of memory ZRAM can use to store the compressed data. The - limit could be changed in run time and "0" means disable the - limit. No limit is the initial state. Unit: bytes + The mem_limit file is write-only and specifies the maximum + amount of memory ZRAM can use to store the compressed data. + The limit could be changed in run time and "0" means disable + the limit. No limit is the initial state. Unit: bytes What: /sys/block/zram<id>/compact Date: August 2015 diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-bq32k b/Documentation/ABI/testing/sysfs-bus-i2c-devices-bq32k new file mode 100644 index 000000000000..398b258fb770 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-bq32k @@ -0,0 +1,7 @@ +What: /sys/bus/i2c/devices/.../trickle_charge_bypass +Date: Jan 2017 +KernelVersion: 4.11 +Contact: Enric Balletbo i Serra <eballetbo@gmail.com> +Description: Attribute for enable/disable the trickle charge bypass + The trickle_charge_bypass attribute allows the userspace to + enable/disable the Trickle charge FET bypass. diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index b8f220f978dd..530809ccfacf 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -170,6 +170,16 @@ Description: Has all of the equivalent parameters as per voltageY. Units after application of scale and offset are m/s^2. +What: /sys/bus/iio/devices/iio:deviceX/in_gravity_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_gravity_y_raw +What: /sys/bus/iio/devices/iio:deviceX/in_gravity_z_raw +KernelVersion: 4.11 +Contact: linux-iio@vger.kernel.org +Description: + Gravity in direction x, y or z (may be arbitrarily assigned + but should match other such assignments on device). + Units after application of scale and offset are m/s^2. + What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw @@ -805,7 +815,7 @@ Description: attribute. E.g. if in_voltage0_raw_thresh_rising_value is set to 1200 and in_voltage0_raw_thresh_rising_hysteresis is set to 50. The event will get activated once in_voltage0_raw goes above 1200 and will become - deactived again once the value falls below 1150. + deactivated again once the value falls below 1150. What: /sys/.../events/in_accel_x_raw_roc_rising_value What: /sys/.../events/in_accel_x_raw_roc_falling_value @@ -1245,7 +1255,8 @@ Description: reflectivity of infrared or ultrasound emitted. Often these sensors are unit less and as such conversion to SI units is not possible. Higher proximity measurements - indicate closer objects, and vice versa. + indicate closer objects, and vice versa. Units after + application of scale and offset are meters. What: /sys/.../iio:deviceX/in_illuminance_input What: /sys/.../iio:deviceX/in_illuminance_raw diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32 new file mode 100644 index 000000000000..efe4c85e3c8b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32 @@ -0,0 +1,18 @@ +What: /sys/bus/iio/devices/triggerX/trigger_polarity +KernelVersion: 4.11 +Contact: fabrice.gasnier@st.com +Description: + The STM32 ADC can be configured to use external trigger sources + (e.g. timers, pwm or exti gpio). Then, it can be tuned to start + conversions on external trigger by either: + - "rising-edge" + - "falling-edge" + - "both-edges". + Reading returns current trigger polarity. + Writing value before enabling conversions sets trigger polarity. + +What: /sys/bus/iio/devices/triggerX/trigger_polarity_available +KernelVersion: 4.11 +Contact: fabrice.gasnier@st.com +Description: + List all available trigger_polarity settings. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 b/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 new file mode 100644 index 000000000000..0a1ca1487fa9 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 @@ -0,0 +1,22 @@ +What /sys/bus/iio/devices/iio:deviceX/sensor_sensitivity +Date: January 2017 +KernelVersion: 4.11 +Contact: linux-iio@vger.kernel.org +Description: + Show or set the gain boost of the amp, from 0-31 range. + default 31 + +What /sys/bus/iio/devices/iio:deviceX/sensor_max_range +Date: January 2017 +KernelVersion: 4.11 +Contact: linux-iio@vger.kernel.org +Description: + Show or set the maximum range between the sensor and the + first object echoed in meters. Default value is 6.020. + This setting limits the time the driver is waiting for a + echo. + Showing the range of available values is represented as the + minimum value, the step and the maximum value, all enclosed + in square brackets. + Example: + [0.043 0.043 11.008] diff --git a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 new file mode 100644 index 000000000000..6534a60037ff --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 @@ -0,0 +1,29 @@ +What: /sys/bus/iio/devices/triggerX/master_mode_available +KernelVersion: 4.11 +Contact: benjamin.gaignard@st.com +Description: + Reading returns the list possible master modes which are: + - "reset" : The UG bit from the TIMx_EGR register is used as trigger output (TRGO). + - "enable" : The Counter Enable signal CNT_EN is used as trigger output. + - "update" : The update event is selected as trigger output. + For instance a master timer can then be used as a prescaler for a slave timer. + - "compare_pulse" : The trigger output send a positive pulse when the CC1IF flag is to be set. + - "OC1REF" : OC1REF signal is used as trigger output. + - "OC2REF" : OC2REF signal is used as trigger output. + - "OC3REF" : OC3REF signal is used as trigger output. + - "OC4REF" : OC4REF signal is used as trigger output. + +What: /sys/bus/iio/devices/triggerX/master_mode +KernelVersion: 4.11 +Contact: benjamin.gaignard@st.com +Description: + Reading returns the current master modes. + Writing set the master mode + +What: /sys/bus/iio/devices/triggerX/sampling_frequency +KernelVersion: 4.11 +Contact: benjamin.gaignard@st.com +Description: + Reading returns the current sampling frequency. + Writing an value different of 0 set and start sampling. + Writing 0 stop sampling. diff --git a/Documentation/ABI/testing/sysfs-class-devfreq-event b/Documentation/ABI/testing/sysfs-class-devfreq-event new file mode 100644 index 000000000000..ceaf0f686d4a --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-devfreq-event @@ -0,0 +1,25 @@ +What: /sys/class/devfreq-event/event(x)/ +Date: January 2017 +Contact: Chanwoo Choi <cw00.choi@samsung.com> +Description: + Provide a place in sysfs for the devfreq-event objects. + This allows accessing various devfreq-event specific variables. + The name of devfreq-event object denoted as 'event(x)' which + includes the unique number of 'x' for each devfreq-event object. + +What: /sys/class/devfreq-event/event(x)/name +Date: January 2017 +Contact: Chanwoo Choi <cw00.choi@samsung.com> +Description: + The /sys/class/devfreq-event/event(x)/name attribute contains + the name of the devfreq-event object. This attribute is + read-only. + +What: /sys/class/devfreq-event/event(x)/enable_count +Date: January 2017 +Contact: Chanwoo Choi <cw00.choi@samsung.com> +Description: + The /sys/class/devfreq-event/event(x)/enable_count attribute + contains the reference count to enable the devfreq-event + object. If the device is enabled, the value of attribute is + greater than zero. diff --git a/Documentation/ABI/testing/sysfs-class-led b/Documentation/ABI/testing/sysfs-class-led index 491cdeedc195..5f67f7ab277b 100644 --- a/Documentation/ABI/testing/sysfs-class-led +++ b/Documentation/ABI/testing/sysfs-class-led @@ -23,6 +23,23 @@ Description: If the LED does not support different brightness levels, this should be 1. +What: /sys/class/leds/<led>/brightness_hw_changed +Date: January 2017 +KernelVersion: 4.11 +Description: + Last hardware set brightness level for this LED. Some LEDs + may be changed autonomously by hardware/firmware. Only LEDs + where this happens and the driver can detect this, will have + this file. + + This file supports poll() to detect when the hardware changes + the brightness. + + Reading this file will return the last brightness level set + by the hardware, this may be different from the current + brightness. Reading this file when no hw brightness change + event has happened will return an ENODATA error. + What: /sys/class/leds/<led>/trigger Date: March 2006 KernelVersion: 2.6.17 diff --git a/Documentation/ABI/testing/sysfs-class-rc b/Documentation/ABI/testing/sysfs-class-rc index b65674da43bb..8be1fd3760e0 100644 --- a/Documentation/ABI/testing/sysfs-class-rc +++ b/Documentation/ABI/testing/sysfs-class-rc @@ -62,18 +62,18 @@ Description: This value may be reset to 0 if the current protocol is altered. What: /sys/class/rc/rcN/wakeup_protocols -Date: Feb 2014 -KernelVersion: 3.15 +Date: Feb 2017 +KernelVersion: 4.11 Contact: Mauro Carvalho Chehab <m.chehab@samsung.com> Description: Reading this file returns a list of available protocols to use for the wakeup filter, something like: - "rc5 rc6 nec jvc [sony]" + "rc-5 nec nec-x rc-6-0 rc-6-6a-24 [rc-6-6a-32] rc-6-mce" + Note that protocol variants are listed, so "nec", "sony", + "rc-5", "rc-6" have their different bit length encodings + listed if available. The enabled wakeup protocol is shown in [] brackets. - Writing "+proto" will add a protocol to the list of enabled - wakeup protocols. - Writing "-proto" will remove a protocol from the list of enabled - wakeup protocols. + Only one protocol can be selected at a time. Writing "proto" will use "proto" for wakeup events. Writing "none" will disable wakeup. Write fails with EINVAL if an invalid protocol combination or diff --git a/Documentation/ABI/testing/sysfs-devices-deferred_probe b/Documentation/ABI/testing/sysfs-devices-deferred_probe deleted file mode 100644 index 58553d7a321f..000000000000 --- a/Documentation/ABI/testing/sysfs-devices-deferred_probe +++ /dev/null @@ -1,12 +0,0 @@ -What: /sys/devices/.../deferred_probe -Date: August 2016 -Contact: Ben Hutchings <ben.hutchings@codethink.co.uk> -Description: - The /sys/devices/.../deferred_probe attribute is - present for all devices. If a driver detects during - probing a device that a related device is not yet - ready, it may defer probing of the first device. The - kernel will retry probing the first device after any - other device is successfully probed. This attribute - reads as 1 if probing of this device is currently - deferred, or 0 otherwise. diff --git a/Documentation/ABI/testing/sysfs-devices-edac b/Documentation/ABI/testing/sysfs-devices-edac index 6568e0010e1a..46ff929fd52a 100644 --- a/Documentation/ABI/testing/sysfs-devices-edac +++ b/Documentation/ABI/testing/sysfs-devices-edac @@ -138,3 +138,20 @@ Contact: Mauro Carvalho Chehab <m.chehab@samsung.com> Description: This attribute file will display what type of memory is currently on this csrow. Normally, either buffered or unbuffered memory (for example, Unbuffered-DDR3). + +What: /sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_ce_count +Date: October 2016 +Contact: linux-edac@vger.kernel.org +Description: This attribute file displays the total count of correctable + errors that have occurred on this DIMM. This count is very important + to examine. CEs provide early indications that a DIMM is beginning + to fail. This count field should be monitored for non-zero values + and report such information to the system administrator. + +What: /sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_ue_count +Date: October 2016 +Contact: linux-edac@vger.kernel.org +Description: This attribute file displays the total count of uncorrectable + errors that have occurred on this DIMM. If panic_on_ue is set, this + counter will not have a chance to increment, since EDAC will panic the + system diff --git a/Documentation/ABI/testing/sysfs-kernel-iommu_groups b/Documentation/ABI/testing/sysfs-kernel-iommu_groups index 9b31556cfdda..35c64e00b35c 100644 --- a/Documentation/ABI/testing/sysfs-kernel-iommu_groups +++ b/Documentation/ABI/testing/sysfs-kernel-iommu_groups @@ -12,3 +12,15 @@ Description: /sys/kernel/iommu_groups/ contains a number of sub- file if the IOMMU driver has chosen to register a more common name for the group. Users: + +What: /sys/kernel/iommu_groups/reserved_regions +Date: January 2017 +KernelVersion: v4.11 +Contact: Eric Auger <eric.auger@redhat.com> +Description: /sys/kernel/iommu_groups/reserved_regions list IOVA + regions that are reserved. Not necessarily all + reserved regions are listed. This is typically used to + output direct-mapped, MSI, non mappable regions. Each + region is described on a single line: the 1st field is + the base IOVA, the second is the end IOVA and the third + field describes the type of the region. diff --git a/Documentation/ABI/testing/sysfs-platform-hidma b/Documentation/ABI/testing/sysfs-platform-hidma index d36441538660..fca40a54df59 100644 --- a/Documentation/ABI/testing/sysfs-platform-hidma +++ b/Documentation/ABI/testing/sysfs-platform-hidma @@ -2,7 +2,7 @@ What: /sys/devices/platform/hidma-*/chid /sys/devices/platform/QCOM8061:*/chid Date: Dec 2015 KernelVersion: 4.4 -Contact: "Sinan Kaya <okaya@cudeaurora.org>" +Contact: "Sinan Kaya <okaya@codeaurora.org>" Description: Contains the ID of the channel within the HIDMA instance. It is used to associate a given HIDMA channel with the diff --git a/Documentation/ABI/testing/sysfs-platform-hidma-mgmt b/Documentation/ABI/testing/sysfs-platform-hidma-mgmt index c2fb5d033f0e..3b6c5c9eabdc 100644 --- a/Documentation/ABI/testing/sysfs-platform-hidma-mgmt +++ b/Documentation/ABI/testing/sysfs-platform-hidma-mgmt @@ -2,7 +2,7 @@ What: /sys/devices/platform/hidma-mgmt*/chanops/chan*/priority /sys/devices/platform/QCOM8060:*/chanops/chan*/priority Date: Nov 2015 KernelVersion: 4.4 -Contact: "Sinan Kaya <okaya@cudeaurora.org>" +Contact: "Sinan Kaya <okaya@codeaurora.org>" Description: Contains either 0 or 1 and indicates if the DMA channel is a low priority (0) or high priority (1) channel. @@ -11,7 +11,7 @@ What: /sys/devices/platform/hidma-mgmt*/chanops/chan*/weight /sys/devices/platform/QCOM8060:*/chanops/chan*/weight Date: Nov 2015 KernelVersion: 4.4 -Contact: "Sinan Kaya <okaya@cudeaurora.org>" +Contact: "Sinan Kaya <okaya@codeaurora.org>" Description: Contains 0..15 and indicates the weight of the channel among equal priority channels during round robin scheduling. @@ -20,7 +20,7 @@ What: /sys/devices/platform/hidma-mgmt*/chreset_timeout_cycles /sys/devices/platform/QCOM8060:*/chreset_timeout_cycles Date: Nov 2015 KernelVersion: 4.4 -Contact: "Sinan Kaya <okaya@cudeaurora.org>" +Contact: "Sinan Kaya <okaya@codeaurora.org>" Description: Contains the platform specific cycle value to wait after a reset command is issued. If the value is chosen too short, @@ -32,7 +32,7 @@ What: /sys/devices/platform/hidma-mgmt*/dma_channels /sys/devices/platform/QCOM8060:*/dma_channels Date: Nov 2015 KernelVersion: 4.4 -Contact: "Sinan Kaya <okaya@cudeaurora.org>" +Contact: "Sinan Kaya <okaya@codeaurora.org>" Description: Contains the number of dma channels supported by one instance of HIDMA hardware. The value may change from chip to chip. @@ -41,7 +41,7 @@ What: /sys/devices/platform/hidma-mgmt*/hw_version_major /sys/devices/platform/QCOM8060:*/hw_version_major Date: Nov 2015 KernelVersion: 4.4 -Contact: "Sinan Kaya <okaya@cudeaurora.org>" +Contact: "Sinan Kaya <okaya@codeaurora.org>" Description: Version number major for the hardware. @@ -49,7 +49,7 @@ What: /sys/devices/platform/hidma-mgmt*/hw_version_minor /sys/devices/platform/QCOM8060:*/hw_version_minor Date: Nov 2015 KernelVersion: 4.4 -Contact: "Sinan Kaya <okaya@cudeaurora.org>" +Contact: "Sinan Kaya <okaya@codeaurora.org>" Description: Version number minor for the hardware. @@ -57,7 +57,7 @@ What: /sys/devices/platform/hidma-mgmt*/max_rd_xactions /sys/devices/platform/QCOM8060:*/max_rd_xactions Date: Nov 2015 KernelVersion: 4.4 -Contact: "Sinan Kaya <okaya@cudeaurora.org>" +Contact: "Sinan Kaya <okaya@codeaurora.org>" Description: Contains a value between 0 and 31. Maximum number of read transactions that can be issued back to back. @@ -69,7 +69,7 @@ What: /sys/devices/platform/hidma-mgmt*/max_read_request /sys/devices/platform/QCOM8060:*/max_read_request Date: Nov 2015 KernelVersion: 4.4 -Contact: "Sinan Kaya <okaya@cudeaurora.org>" +Contact: "Sinan Kaya <okaya@codeaurora.org>" Description: Size of each read request. The value needs to be a power of two and can be between 128 and 1024. @@ -78,7 +78,7 @@ What: /sys/devices/platform/hidma-mgmt*/max_wr_xactions /sys/devices/platform/QCOM8060:*/max_wr_xactions Date: Nov 2015 KernelVersion: 4.4 -Contact: "Sinan Kaya <okaya@cudeaurora.org>" +Contact: "Sinan Kaya <okaya@codeaurora.org>" Description: Contains a value between 0 and 31. Maximum number of write transactions that can be issued back to back. @@ -91,7 +91,7 @@ What: /sys/devices/platform/hidma-mgmt*/max_write_request /sys/devices/platform/QCOM8060:*/max_write_request Date: Nov 2015 KernelVersion: 4.4 -Contact: "Sinan Kaya <okaya@cudeaurora.org>" +Contact: "Sinan Kaya <okaya@codeaurora.org>" Description: Size of each write request. The value needs to be a power of two and can be between 128 and 1024. diff --git a/Documentation/DMA-attributes.txt b/Documentation/DMA-attributes.txt index 98bf7ac29aad..44c6bc496eee 100644 --- a/Documentation/DMA-attributes.txt +++ b/Documentation/DMA-attributes.txt @@ -143,3 +143,13 @@ So, this provides a way for drivers to avoid those error messages on calls where allocation failures are not a problem, and shouldn't bother the logs. NOTE: At the moment DMA_ATTR_NO_WARN is only implemented on PowerPC. + +DMA_ATTR_PRIVILEGED +------------------------------ + +Some advanced peripherals such as remote processors and GPUs perform +accesses to DMA buffers in both privileged "supervisor" and unprivileged +"user" modes. This attribute is used to indicate to the DMA-mapping +subsystem that the buffer is fully accessible at the elevated privilege +level (and ideally inaccessible or at least read-only at the +lesser-privileged levels). diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index c339cf59ad69..164c1c76971f 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -11,7 +11,7 @@ DOCBOOKS := z8530book.xml \ writing_usb_driver.xml networking.xml \ kernel-api.xml filesystems.xml lsm.xml kgdb.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ - genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ + genericirq.xml s390-drivers.xml scsi.xml \ sh.xml w1.xml \ writing_musb_glue_layer.xml diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl index f3abca7ec53d..856ac20bf367 100644 --- a/Documentation/DocBook/kgdb.tmpl +++ b/Documentation/DocBook/kgdb.tmpl @@ -115,12 +115,12 @@ </para> <para> If the architecture that you are using supports the kernel option - CONFIG_DEBUG_RODATA, you should consider turning it off. This + CONFIG_STRICT_KERNEL_RWX, you should consider turning it off. This option will prevent the use of software breakpoints because it marks certain regions of the kernel's memory space as read-only. If kgdb supports it for the architecture you are using, you can use hardware breakpoints if you desire to run with the - CONFIG_DEBUG_RODATA option turned on, else you need to turn off + CONFIG_STRICT_KERNEL_RWX option turned on, else you need to turn off this option. </para> <para> @@ -135,7 +135,7 @@ <para>Here is an example set of .config symbols to enable or disable for kgdb: <itemizedlist> - <listitem><para># CONFIG_DEBUG_RODATA is not set</para></listitem> + <listitem><para># CONFIG_STRICT_KERNEL_RWX is not set</para></listitem> <listitem><para>CONFIG_FRAME_POINTER=y</para></listitem> <listitem><para>CONFIG_KGDB=y</para></listitem> <listitem><para>CONFIG_KGDB_SERIAL_CONSOLE=y</para></listitem> @@ -166,7 +166,7 @@ </para> <para>Here is an example set of .config symbols to enable/disable kdb: <itemizedlist> - <listitem><para># CONFIG_DEBUG_RODATA is not set</para></listitem> + <listitem><para># CONFIG_STRICT_KERNEL_RWX is not set</para></listitem> <listitem><para>CONFIG_FRAME_POINTER=y</para></listitem> <listitem><para>CONFIG_KGDB=y</para></listitem> <listitem><para>CONFIG_KGDB_SERIAL_CONSOLE=y</para></listitem> diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index d7fcdc5a4379..0320910b866d 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -1020,7 +1020,7 @@ and other resources, etc. </itemizedlist> <para> - Of errors detected as above, the followings are not ATA/ATAPI + Of errors detected as above, the following are not ATA/ATAPI device errors but ATA bus errors and should be handled according to <xref linkend="excatATAbusErr"/>. </para> diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl deleted file mode 100644 index 5210f8a577c6..000000000000 --- a/Documentation/DocBook/uio-howto.tmpl +++ /dev/null @@ -1,1112 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" []> - -<book id="index"> -<bookinfo> -<title>The Userspace I/O HOWTO</title> - -<author> - <firstname>Hans-Jürgen</firstname> - <surname>Koch</surname> - <authorblurb><para>Linux developer, Linutronix</para></authorblurb> - <affiliation> - <orgname> - <ulink url="http://www.linutronix.de">Linutronix</ulink> - </orgname> - - <address> - <email>hjk@hansjkoch.de</email> - </address> - </affiliation> -</author> - -<copyright> - <year>2006-2008</year> - <holder>Hans-Jürgen Koch.</holder> -</copyright> -<copyright> - <year>2009</year> - <holder>Red Hat Inc, Michael S. Tsirkin (mst@redhat.com)</holder> -</copyright> - -<legalnotice> -<para> -This documentation is Free Software licensed under the terms of the -GPL version 2. -</para> -</legalnotice> - -<pubdate>2006-12-11</pubdate> - -<abstract> - <para>This HOWTO describes concept and usage of Linux kernel's - Userspace I/O system.</para> -</abstract> - -<revhistory> - <revision> - <revnumber>0.10</revnumber> - <date>2016-10-17</date> - <authorinitials>sch</authorinitials> - <revremark>Added generic hyperv driver - </revremark> - </revision> - <revision> - <revnumber>0.9</revnumber> - <date>2009-07-16</date> - <authorinitials>mst</authorinitials> - <revremark>Added generic pci driver - </revremark> - </revision> - <revision> - <revnumber>0.8</revnumber> - <date>2008-12-24</date> - <authorinitials>hjk</authorinitials> - <revremark>Added name attributes in mem and portio sysfs directories. - </revremark> - </revision> - <revision> - <revnumber>0.7</revnumber> - <date>2008-12-23</date> - <authorinitials>hjk</authorinitials> - <revremark>Added generic platform drivers and offset attribute.</revremark> - </revision> - <revision> - <revnumber>0.6</revnumber> - <date>2008-12-05</date> - <authorinitials>hjk</authorinitials> - <revremark>Added description of portio sysfs attributes.</revremark> - </revision> - <revision> - <revnumber>0.5</revnumber> - <date>2008-05-22</date> - <authorinitials>hjk</authorinitials> - <revremark>Added description of write() function.</revremark> - </revision> - <revision> - <revnumber>0.4</revnumber> - <date>2007-11-26</date> - <authorinitials>hjk</authorinitials> - <revremark>Removed section about uio_dummy.</revremark> - </revision> - <revision> - <revnumber>0.3</revnumber> - <date>2007-04-29</date> - <authorinitials>hjk</authorinitials> - <revremark>Added section about userspace drivers.</revremark> - </revision> - <revision> - <revnumber>0.2</revnumber> - <date>2007-02-13</date> - <authorinitials>hjk</authorinitials> - <revremark>Update after multiple mappings were added.</revremark> - </revision> - <revision> - <revnumber>0.1</revnumber> - <date>2006-12-11</date> - <authorinitials>hjk</authorinitials> - <revremark>First draft.</revremark> - </revision> -</revhistory> -</bookinfo> - -<chapter id="aboutthisdoc"> -<?dbhtml filename="aboutthis.html"?> -<title>About this document</title> - -<sect1 id="translations"> -<?dbhtml filename="translations.html"?> -<title>Translations</title> - -<para>If you know of any translations for this document, or you are -interested in translating it, please email me -<email>hjk@hansjkoch.de</email>. -</para> -</sect1> - -<sect1 id="preface"> -<title>Preface</title> - <para> - For many types of devices, creating a Linux kernel driver is - overkill. All that is really needed is some way to handle an - interrupt and provide access to the memory space of the - device. The logic of controlling the device does not - necessarily have to be within the kernel, as the device does - not need to take advantage of any of other resources that the - kernel provides. One such common class of devices that are - like this are for industrial I/O cards. - </para> - <para> - To address this situation, the userspace I/O system (UIO) was - designed. For typical industrial I/O cards, only a very small - kernel module is needed. The main part of the driver will run in - user space. This simplifies development and reduces the risk of - serious bugs within a kernel module. - </para> - <para> - Please note that UIO is not an universal driver interface. Devices - that are already handled well by other kernel subsystems (like - networking or serial or USB) are no candidates for an UIO driver. - Hardware that is ideally suited for an UIO driver fulfills all of - the following: - </para> -<itemizedlist> -<listitem> - <para>The device has memory that can be mapped. The device can be - controlled completely by writing to this memory.</para> -</listitem> -<listitem> - <para>The device usually generates interrupts.</para> -</listitem> -<listitem> - <para>The device does not fit into one of the standard kernel - subsystems.</para> -</listitem> -</itemizedlist> -</sect1> - -<sect1 id="thanks"> -<title>Acknowledgments</title> - <para>I'd like to thank Thomas Gleixner and Benedikt Spranger of - Linutronix, who have not only written most of the UIO code, but also - helped greatly writing this HOWTO by giving me all kinds of background - information.</para> -</sect1> - -<sect1 id="feedback"> -<title>Feedback</title> - <para>Find something wrong with this document? (Or perhaps something - right?) I would love to hear from you. Please email me at - <email>hjk@hansjkoch.de</email>.</para> -</sect1> -</chapter> - -<chapter id="about"> -<?dbhtml filename="about.html"?> -<title>About UIO</title> - -<para>If you use UIO for your card's driver, here's what you get:</para> - -<itemizedlist> -<listitem> - <para>only one small kernel module to write and maintain.</para> -</listitem> -<listitem> - <para>develop the main part of your driver in user space, - with all the tools and libraries you're used to.</para> -</listitem> -<listitem> - <para>bugs in your driver won't crash the kernel.</para> -</listitem> -<listitem> - <para>updates of your driver can take place without recompiling - the kernel.</para> -</listitem> -</itemizedlist> - -<sect1 id="how_uio_works"> -<title>How UIO works</title> - <para> - Each UIO device is accessed through a device file and several - sysfs attribute files. The device file will be called - <filename>/dev/uio0</filename> for the first device, and - <filename>/dev/uio1</filename>, <filename>/dev/uio2</filename> - and so on for subsequent devices. - </para> - - <para><filename>/dev/uioX</filename> is used to access the - address space of the card. Just use - <function>mmap()</function> to access registers or RAM - locations of your card. - </para> - - <para> - Interrupts are handled by reading from - <filename>/dev/uioX</filename>. A blocking - <function>read()</function> from - <filename>/dev/uioX</filename> will return as soon as an - interrupt occurs. You can also use - <function>select()</function> on - <filename>/dev/uioX</filename> to wait for an interrupt. The - integer value read from <filename>/dev/uioX</filename> - represents the total interrupt count. You can use this number - to figure out if you missed some interrupts. - </para> - <para> - For some hardware that has more than one interrupt source internally, - but not separate IRQ mask and status registers, there might be - situations where userspace cannot determine what the interrupt source - was if the kernel handler disables them by writing to the chip's IRQ - register. In such a case, the kernel has to disable the IRQ completely - to leave the chip's register untouched. Now the userspace part can - determine the cause of the interrupt, but it cannot re-enable - interrupts. Another cornercase is chips where re-enabling interrupts - is a read-modify-write operation to a combined IRQ status/acknowledge - register. This would be racy if a new interrupt occurred - simultaneously. - </para> - <para> - To address these problems, UIO also implements a write() function. It - is normally not used and can be ignored for hardware that has only a - single interrupt source or has separate IRQ mask and status registers. - If you need it, however, a write to <filename>/dev/uioX</filename> - will call the <function>irqcontrol()</function> function implemented - by the driver. You have to write a 32-bit value that is usually either - 0 or 1 to disable or enable interrupts. If a driver does not implement - <function>irqcontrol()</function>, <function>write()</function> will - return with <varname>-ENOSYS</varname>. - </para> - - <para> - To handle interrupts properly, your custom kernel module can - provide its own interrupt handler. It will automatically be - called by the built-in handler. - </para> - - <para> - For cards that don't generate interrupts but need to be - polled, there is the possibility to set up a timer that - triggers the interrupt handler at configurable time intervals. - This interrupt simulation is done by calling - <function>uio_event_notify()</function> - from the timer's event handler. - </para> - - <para> - Each driver provides attributes that are used to read or write - variables. These attributes are accessible through sysfs - files. A custom kernel driver module can add its own - attributes to the device owned by the uio driver, but not added - to the UIO device itself at this time. This might change in the - future if it would be found to be useful. - </para> - - <para> - The following standard attributes are provided by the UIO - framework: - </para> -<itemizedlist> -<listitem> - <para> - <filename>name</filename>: The name of your device. It is - recommended to use the name of your kernel module for this. - </para> -</listitem> -<listitem> - <para> - <filename>version</filename>: A version string defined by your - driver. This allows the user space part of your driver to deal - with different versions of the kernel module. - </para> -</listitem> -<listitem> - <para> - <filename>event</filename>: The total number of interrupts - handled by the driver since the last time the device node was - read. - </para> -</listitem> -</itemizedlist> -<para> - These attributes appear under the - <filename>/sys/class/uio/uioX</filename> directory. Please - note that this directory might be a symlink, and not a real - directory. Any userspace code that accesses it must be able - to handle this. -</para> -<para> - Each UIO device can make one or more memory regions available for - memory mapping. This is necessary because some industrial I/O cards - require access to more than one PCI memory region in a driver. -</para> -<para> - Each mapping has its own directory in sysfs, the first mapping - appears as <filename>/sys/class/uio/uioX/maps/map0/</filename>. - Subsequent mappings create directories <filename>map1/</filename>, - <filename>map2/</filename>, and so on. These directories will only - appear if the size of the mapping is not 0. -</para> -<para> - Each <filename>mapX/</filename> directory contains four read-only files - that show attributes of the memory: -</para> -<itemizedlist> -<listitem> - <para> - <filename>name</filename>: A string identifier for this mapping. This - is optional, the string can be empty. Drivers can set this to make it - easier for userspace to find the correct mapping. - </para> -</listitem> -<listitem> - <para> - <filename>addr</filename>: The address of memory that can be mapped. - </para> -</listitem> -<listitem> - <para> - <filename>size</filename>: The size, in bytes, of the memory - pointed to by addr. - </para> -</listitem> -<listitem> - <para> - <filename>offset</filename>: The offset, in bytes, that has to be - added to the pointer returned by <function>mmap()</function> to get - to the actual device memory. This is important if the device's memory - is not page aligned. Remember that pointers returned by - <function>mmap()</function> are always page aligned, so it is good - style to always add this offset. - </para> -</listitem> -</itemizedlist> - -<para> - From userspace, the different mappings are distinguished by adjusting - the <varname>offset</varname> parameter of the - <function>mmap()</function> call. To map the memory of mapping N, you - have to use N times the page size as your offset: -</para> -<programlisting format="linespecific"> -offset = N * getpagesize(); -</programlisting> - -<para> - Sometimes there is hardware with memory-like regions that can not be - mapped with the technique described here, but there are still ways to - access them from userspace. The most common example are x86 ioports. - On x86 systems, userspace can access these ioports using - <function>ioperm()</function>, <function>iopl()</function>, - <function>inb()</function>, <function>outb()</function>, and similar - functions. -</para> -<para> - Since these ioport regions can not be mapped, they will not appear under - <filename>/sys/class/uio/uioX/maps/</filename> like the normal memory - described above. Without information about the port regions a hardware - has to offer, it becomes difficult for the userspace part of the - driver to find out which ports belong to which UIO device. -</para> -<para> - To address this situation, the new directory - <filename>/sys/class/uio/uioX/portio/</filename> was added. It only - exists if the driver wants to pass information about one or more port - regions to userspace. If that is the case, subdirectories named - <filename>port0</filename>, <filename>port1</filename>, and so on, - will appear underneath - <filename>/sys/class/uio/uioX/portio/</filename>. -</para> -<para> - Each <filename>portX/</filename> directory contains four read-only - files that show name, start, size, and type of the port region: -</para> -<itemizedlist> -<listitem> - <para> - <filename>name</filename>: A string identifier for this port region. - The string is optional and can be empty. Drivers can set it to make it - easier for userspace to find a certain port region. - </para> -</listitem> -<listitem> - <para> - <filename>start</filename>: The first port of this region. - </para> -</listitem> -<listitem> - <para> - <filename>size</filename>: The number of ports in this region. - </para> -</listitem> -<listitem> - <para> - <filename>porttype</filename>: A string describing the type of port. - </para> -</listitem> -</itemizedlist> - - -</sect1> -</chapter> - -<chapter id="custom_kernel_module" xreflabel="Writing your own kernel module"> -<?dbhtml filename="custom_kernel_module.html"?> -<title>Writing your own kernel module</title> - <para> - Please have a look at <filename>uio_cif.c</filename> as an - example. The following paragraphs explain the different - sections of this file. - </para> - -<sect1 id="uio_info"> -<title>struct uio_info</title> - <para> - This structure tells the framework the details of your driver, - Some of the members are required, others are optional. - </para> - -<itemizedlist> -<listitem><para> -<varname>const char *name</varname>: Required. The name of your driver as -it will appear in sysfs. I recommend using the name of your module for this. -</para></listitem> - -<listitem><para> -<varname>const char *version</varname>: Required. This string appears in -<filename>/sys/class/uio/uioX/version</filename>. -</para></listitem> - -<listitem><para> -<varname>struct uio_mem mem[ MAX_UIO_MAPS ]</varname>: Required if you -have memory that can be mapped with <function>mmap()</function>. For each -mapping you need to fill one of the <varname>uio_mem</varname> structures. -See the description below for details. -</para></listitem> - -<listitem><para> -<varname>struct uio_port port[ MAX_UIO_PORTS_REGIONS ]</varname>: Required -if you want to pass information about ioports to userspace. For each port -region you need to fill one of the <varname>uio_port</varname> structures. -See the description below for details. -</para></listitem> - -<listitem><para> -<varname>long irq</varname>: Required. If your hardware generates an -interrupt, it's your modules task to determine the irq number during -initialization. If you don't have a hardware generated interrupt but -want to trigger the interrupt handler in some other way, set -<varname>irq</varname> to <varname>UIO_IRQ_CUSTOM</varname>. -If you had no interrupt at all, you could set -<varname>irq</varname> to <varname>UIO_IRQ_NONE</varname>, though this -rarely makes sense. -</para></listitem> - -<listitem><para> -<varname>unsigned long irq_flags</varname>: Required if you've set -<varname>irq</varname> to a hardware interrupt number. The flags given -here will be used in the call to <function>request_irq()</function>. -</para></listitem> - -<listitem><para> -<varname>int (*mmap)(struct uio_info *info, struct vm_area_struct -*vma)</varname>: Optional. If you need a special -<function>mmap()</function> function, you can set it here. If this -pointer is not NULL, your <function>mmap()</function> will be called -instead of the built-in one. -</para></listitem> - -<listitem><para> -<varname>int (*open)(struct uio_info *info, struct inode *inode) -</varname>: Optional. You might want to have your own -<function>open()</function>, e.g. to enable interrupts only when your -device is actually used. -</para></listitem> - -<listitem><para> -<varname>int (*release)(struct uio_info *info, struct inode *inode) -</varname>: Optional. If you define your own -<function>open()</function>, you will probably also want a custom -<function>release()</function> function. -</para></listitem> - -<listitem><para> -<varname>int (*irqcontrol)(struct uio_info *info, s32 irq_on) -</varname>: Optional. If you need to be able to enable or disable -interrupts from userspace by writing to <filename>/dev/uioX</filename>, -you can implement this function. The parameter <varname>irq_on</varname> -will be 0 to disable interrupts and 1 to enable them. -</para></listitem> -</itemizedlist> - -<para> -Usually, your device will have one or more memory regions that can be mapped -to user space. For each region, you have to set up a -<varname>struct uio_mem</varname> in the <varname>mem[]</varname> array. -Here's a description of the fields of <varname>struct uio_mem</varname>: -</para> - -<itemizedlist> -<listitem><para> -<varname>const char *name</varname>: Optional. Set this to help identify -the memory region, it will show up in the corresponding sysfs node. -</para></listitem> - -<listitem><para> -<varname>int memtype</varname>: Required if the mapping is used. Set this to -<varname>UIO_MEM_PHYS</varname> if you you have physical memory on your -card to be mapped. Use <varname>UIO_MEM_LOGICAL</varname> for logical -memory (e.g. allocated with <function>kmalloc()</function>). There's also -<varname>UIO_MEM_VIRTUAL</varname> for virtual memory. -</para></listitem> - -<listitem><para> -<varname>phys_addr_t addr</varname>: Required if the mapping is used. -Fill in the address of your memory block. This address is the one that -appears in sysfs. -</para></listitem> - -<listitem><para> -<varname>resource_size_t size</varname>: Fill in the size of the -memory block that <varname>addr</varname> points to. If <varname>size</varname> -is zero, the mapping is considered unused. Note that you -<emphasis>must</emphasis> initialize <varname>size</varname> with zero for -all unused mappings. -</para></listitem> - -<listitem><para> -<varname>void *internal_addr</varname>: If you have to access this memory -region from within your kernel module, you will want to map it internally by -using something like <function>ioremap()</function>. Addresses -returned by this function cannot be mapped to user space, so you must not -store it in <varname>addr</varname>. Use <varname>internal_addr</varname> -instead to remember such an address. -</para></listitem> -</itemizedlist> - -<para> -Please do not touch the <varname>map</varname> element of -<varname>struct uio_mem</varname>! It is used by the UIO framework -to set up sysfs files for this mapping. Simply leave it alone. -</para> - -<para> -Sometimes, your device can have one or more port regions which can not be -mapped to userspace. But if there are other possibilities for userspace to -access these ports, it makes sense to make information about the ports -available in sysfs. For each region, you have to set up a -<varname>struct uio_port</varname> in the <varname>port[]</varname> array. -Here's a description of the fields of <varname>struct uio_port</varname>: -</para> - -<itemizedlist> -<listitem><para> -<varname>char *porttype</varname>: Required. Set this to one of the predefined -constants. Use <varname>UIO_PORT_X86</varname> for the ioports found in x86 -architectures. -</para></listitem> - -<listitem><para> -<varname>unsigned long start</varname>: Required if the port region is used. -Fill in the number of the first port of this region. -</para></listitem> - -<listitem><para> -<varname>unsigned long size</varname>: Fill in the number of ports in this -region. If <varname>size</varname> is zero, the region is considered unused. -Note that you <emphasis>must</emphasis> initialize <varname>size</varname> -with zero for all unused regions. -</para></listitem> -</itemizedlist> - -<para> -Please do not touch the <varname>portio</varname> element of -<varname>struct uio_port</varname>! It is used internally by the UIO -framework to set up sysfs files for this region. Simply leave it alone. -</para> - -</sect1> - -<sect1 id="adding_irq_handler"> -<title>Adding an interrupt handler</title> - <para> - What you need to do in your interrupt handler depends on your - hardware and on how you want to handle it. You should try to - keep the amount of code in your kernel interrupt handler low. - If your hardware requires no action that you - <emphasis>have</emphasis> to perform after each interrupt, - then your handler can be empty.</para> <para>If, on the other - hand, your hardware <emphasis>needs</emphasis> some action to - be performed after each interrupt, then you - <emphasis>must</emphasis> do it in your kernel module. Note - that you cannot rely on the userspace part of your driver. Your - userspace program can terminate at any time, possibly leaving - your hardware in a state where proper interrupt handling is - still required. - </para> - - <para> - There might also be applications where you want to read data - from your hardware at each interrupt and buffer it in a piece - of kernel memory you've allocated for that purpose. With this - technique you could avoid loss of data if your userspace - program misses an interrupt. - </para> - - <para> - A note on shared interrupts: Your driver should support - interrupt sharing whenever this is possible. It is possible if - and only if your driver can detect whether your hardware has - triggered the interrupt or not. This is usually done by looking - at an interrupt status register. If your driver sees that the - IRQ bit is actually set, it will perform its actions, and the - handler returns IRQ_HANDLED. If the driver detects that it was - not your hardware that caused the interrupt, it will do nothing - and return IRQ_NONE, allowing the kernel to call the next - possible interrupt handler. - </para> - - <para> - If you decide not to support shared interrupts, your card - won't work in computers with no free interrupts. As this - frequently happens on the PC platform, you can save yourself a - lot of trouble by supporting interrupt sharing. - </para> -</sect1> - -<sect1 id="using_uio_pdrv"> -<title>Using uio_pdrv for platform devices</title> - <para> - In many cases, UIO drivers for platform devices can be handled in a - generic way. In the same place where you define your - <varname>struct platform_device</varname>, you simply also implement - your interrupt handler and fill your - <varname>struct uio_info</varname>. A pointer to this - <varname>struct uio_info</varname> is then used as - <varname>platform_data</varname> for your platform device. - </para> - <para> - You also need to set up an array of <varname>struct resource</varname> - containing addresses and sizes of your memory mappings. This - information is passed to the driver using the - <varname>.resource</varname> and <varname>.num_resources</varname> - elements of <varname>struct platform_device</varname>. - </para> - <para> - You now have to set the <varname>.name</varname> element of - <varname>struct platform_device</varname> to - <varname>"uio_pdrv"</varname> to use the generic UIO platform device - driver. This driver will fill the <varname>mem[]</varname> array - according to the resources given, and register the device. - </para> - <para> - The advantage of this approach is that you only have to edit a file - you need to edit anyway. You do not have to create an extra driver. - </para> -</sect1> - -<sect1 id="using_uio_pdrv_genirq"> -<title>Using uio_pdrv_genirq for platform devices</title> - <para> - Especially in embedded devices, you frequently find chips where the - irq pin is tied to its own dedicated interrupt line. In such cases, - where you can be really sure the interrupt is not shared, we can take - the concept of <varname>uio_pdrv</varname> one step further and use a - generic interrupt handler. That's what - <varname>uio_pdrv_genirq</varname> does. - </para> - <para> - The setup for this driver is the same as described above for - <varname>uio_pdrv</varname>, except that you do not implement an - interrupt handler. The <varname>.handler</varname> element of - <varname>struct uio_info</varname> must remain - <varname>NULL</varname>. The <varname>.irq_flags</varname> element - must not contain <varname>IRQF_SHARED</varname>. - </para> - <para> - You will set the <varname>.name</varname> element of - <varname>struct platform_device</varname> to - <varname>"uio_pdrv_genirq"</varname> to use this driver. - </para> - <para> - The generic interrupt handler of <varname>uio_pdrv_genirq</varname> - will simply disable the interrupt line using - <function>disable_irq_nosync()</function>. After doing its work, - userspace can reenable the interrupt by writing 0x00000001 to the UIO - device file. The driver already implements an - <function>irq_control()</function> to make this possible, you must not - implement your own. - </para> - <para> - Using <varname>uio_pdrv_genirq</varname> not only saves a few lines of - interrupt handler code. You also do not need to know anything about - the chip's internal registers to create the kernel part of the driver. - All you need to know is the irq number of the pin the chip is - connected to. - </para> -</sect1> - -<sect1 id="using-uio_dmem_genirq"> -<title>Using uio_dmem_genirq for platform devices</title> - <para> - In addition to statically allocated memory ranges, they may also be - a desire to use dynamically allocated regions in a user space driver. - In particular, being able to access memory made available through the - dma-mapping API, may be particularly useful. The - <varname>uio_dmem_genirq</varname> driver provides a way to accomplish - this. - </para> - <para> - This driver is used in a similar manner to the - <varname>"uio_pdrv_genirq"</varname> driver with respect to interrupt - configuration and handling. - </para> - <para> - Set the <varname>.name</varname> element of - <varname>struct platform_device</varname> to - <varname>"uio_dmem_genirq"</varname> to use this driver. - </para> - <para> - When using this driver, fill in the <varname>.platform_data</varname> - element of <varname>struct platform_device</varname>, which is of type - <varname>struct uio_dmem_genirq_pdata</varname> and which contains the - following elements: - </para> - <itemizedlist> - <listitem><para><varname>struct uio_info uioinfo</varname>: The same - structure used as the <varname>uio_pdrv_genirq</varname> platform - data</para></listitem> - <listitem><para><varname>unsigned int *dynamic_region_sizes</varname>: - Pointer to list of sizes of dynamic memory regions to be mapped into - user space. - </para></listitem> - <listitem><para><varname>unsigned int num_dynamic_regions</varname>: - Number of elements in <varname>dynamic_region_sizes</varname> array. - </para></listitem> - </itemizedlist> - <para> - The dynamic regions defined in the platform data will be appended to - the <varname> mem[] </varname> array after the platform device - resources, which implies that the total number of static and dynamic - memory regions cannot exceed <varname>MAX_UIO_MAPS</varname>. - </para> - <para> - The dynamic memory regions will be allocated when the UIO device file, - <varname>/dev/uioX</varname> is opened. - Similar to static memory resources, the memory region information for - dynamic regions is then visible via sysfs at - <varname>/sys/class/uio/uioX/maps/mapY/*</varname>. - The dynamic memory regions will be freed when the UIO device file is - closed. When no processes are holding the device file open, the address - returned to userspace is ~0. - </para> -</sect1> - -</chapter> - -<chapter id="userspace_driver" xreflabel="Writing a driver in user space"> -<?dbhtml filename="userspace_driver.html"?> -<title>Writing a driver in userspace</title> - <para> - Once you have a working kernel module for your hardware, you can - write the userspace part of your driver. You don't need any special - libraries, your driver can be written in any reasonable language, - you can use floating point numbers and so on. In short, you can - use all the tools and libraries you'd normally use for writing a - userspace application. - </para> - -<sect1 id="getting_uio_information"> -<title>Getting information about your UIO device</title> - <para> - Information about all UIO devices is available in sysfs. The - first thing you should do in your driver is check - <varname>name</varname> and <varname>version</varname> to - make sure your talking to the right device and that its kernel - driver has the version you expect. - </para> - <para> - You should also make sure that the memory mapping you need - exists and has the size you expect. - </para> - <para> - There is a tool called <varname>lsuio</varname> that lists - UIO devices and their attributes. It is available here: - </para> - <para> - <ulink url="http://www.osadl.org/projects/downloads/UIO/user/"> - http://www.osadl.org/projects/downloads/UIO/user/</ulink> - </para> - <para> - With <varname>lsuio</varname> you can quickly check if your - kernel module is loaded and which attributes it exports. - Have a look at the manpage for details. - </para> - <para> - The source code of <varname>lsuio</varname> can serve as an - example for getting information about an UIO device. - The file <filename>uio_helper.c</filename> contains a lot of - functions you could use in your userspace driver code. - </para> -</sect1> - -<sect1 id="mmap_device_memory"> -<title>mmap() device memory</title> - <para> - After you made sure you've got the right device with the - memory mappings you need, all you have to do is to call - <function>mmap()</function> to map the device's memory - to userspace. - </para> - <para> - The parameter <varname>offset</varname> of the - <function>mmap()</function> call has a special meaning - for UIO devices: It is used to select which mapping of - your device you want to map. To map the memory of - mapping N, you have to use N times the page size as - your offset: - </para> -<programlisting format="linespecific"> - offset = N * getpagesize(); -</programlisting> - <para> - N starts from zero, so if you've got only one memory - range to map, set <varname>offset = 0</varname>. - A drawback of this technique is that memory is always - mapped beginning with its start address. - </para> -</sect1> - -<sect1 id="wait_for_interrupts"> -<title>Waiting for interrupts</title> - <para> - After you successfully mapped your devices memory, you - can access it like an ordinary array. Usually, you will - perform some initialization. After that, your hardware - starts working and will generate an interrupt as soon - as it's finished, has some data available, or needs your - attention because an error occurred. - </para> - <para> - <filename>/dev/uioX</filename> is a read-only file. A - <function>read()</function> will always block until an - interrupt occurs. There is only one legal value for the - <varname>count</varname> parameter of - <function>read()</function>, and that is the size of a - signed 32 bit integer (4). Any other value for - <varname>count</varname> causes <function>read()</function> - to fail. The signed 32 bit integer read is the interrupt - count of your device. If the value is one more than the value - you read the last time, everything is OK. If the difference - is greater than one, you missed interrupts. - </para> - <para> - You can also use <function>select()</function> on - <filename>/dev/uioX</filename>. - </para> -</sect1> - -</chapter> - -<chapter id="uio_pci_generic" xreflabel="Using Generic driver for PCI cards"> -<?dbhtml filename="uio_pci_generic.html"?> -<title>Generic PCI UIO driver</title> - <para> - The generic driver is a kernel module named uio_pci_generic. - It can work with any device compliant to PCI 2.3 (circa 2002) and - any compliant PCI Express device. Using this, you only need to - write the userspace driver, removing the need to write - a hardware-specific kernel module. - </para> - -<sect1 id="uio_pci_generic_binding"> -<title>Making the driver recognize the device</title> - <para> -Since the driver does not declare any device ids, it will not get loaded -automatically and will not automatically bind to any devices, you must load it -and allocate id to the driver yourself. For example: - <programlisting> - modprobe uio_pci_generic - echo "8086 10f5" > /sys/bus/pci/drivers/uio_pci_generic/new_id - </programlisting> - </para> - <para> -If there already is a hardware specific kernel driver for your device, the -generic driver still won't bind to it, in this case if you want to use the -generic driver (why would you?) you'll have to manually unbind the hardware -specific driver and bind the generic driver, like this: - <programlisting> - echo -n 0000:00:19.0 > /sys/bus/pci/drivers/e1000e/unbind - echo -n 0000:00:19.0 > /sys/bus/pci/drivers/uio_pci_generic/bind - </programlisting> - </para> - <para> -You can verify that the device has been bound to the driver -by looking for it in sysfs, for example like the following: - <programlisting> - ls -l /sys/bus/pci/devices/0000:00:19.0/driver - </programlisting> -Which if successful should print - <programlisting> - .../0000:00:19.0/driver -> ../../../bus/pci/drivers/uio_pci_generic - </programlisting> -Note that the generic driver will not bind to old PCI 2.2 devices. -If binding the device failed, run the following command: - <programlisting> - dmesg - </programlisting> -and look in the output for failure reasons - </para> -</sect1> - -<sect1 id="uio_pci_generic_internals"> -<title>Things to know about uio_pci_generic</title> - <para> -Interrupts are handled using the Interrupt Disable bit in the PCI command -register and Interrupt Status bit in the PCI status register. All devices -compliant to PCI 2.3 (circa 2002) and all compliant PCI Express devices should -support these bits. uio_pci_generic detects this support, and won't bind to -devices which do not support the Interrupt Disable Bit in the command register. - </para> - <para> -On each interrupt, uio_pci_generic sets the Interrupt Disable bit. -This prevents the device from generating further interrupts -until the bit is cleared. The userspace driver should clear this -bit before blocking and waiting for more interrupts. - </para> -</sect1> -<sect1 id="uio_pci_generic_userspace"> -<title>Writing userspace driver using uio_pci_generic</title> - <para> -Userspace driver can use pci sysfs interface, or the -libpci libray that wraps it, to talk to the device and to -re-enable interrupts by writing to the command register. - </para> -</sect1> -<sect1 id="uio_pci_generic_example"> -<title>Example code using uio_pci_generic</title> - <para> -Here is some sample userspace driver code using uio_pci_generic: -<programlisting> -#include <stdlib.h> -#include <stdio.h> -#include <unistd.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <fcntl.h> -#include <errno.h> - -int main() -{ - int uiofd; - int configfd; - int err; - int i; - unsigned icount; - unsigned char command_high; - - uiofd = open("/dev/uio0", O_RDONLY); - if (uiofd < 0) { - perror("uio open:"); - return errno; - } - configfd = open("/sys/class/uio/uio0/device/config", O_RDWR); - if (configfd < 0) { - perror("config open:"); - return errno; - } - - /* Read and cache command value */ - err = pread(configfd, &command_high, 1, 5); - if (err != 1) { - perror("command config read:"); - return errno; - } - command_high &= ~0x4; - - for(i = 0;; ++i) { - /* Print out a message, for debugging. */ - if (i == 0) - fprintf(stderr, "Started uio test driver.\n"); - else - fprintf(stderr, "Interrupts: %d\n", icount); - - /****************************************/ - /* Here we got an interrupt from the - device. Do something to it. */ - /****************************************/ - - /* Re-enable interrupts. */ - err = pwrite(configfd, &command_high, 1, 5); - if (err != 1) { - perror("config write:"); - break; - } - - /* Wait for next interrupt. */ - err = read(uiofd, &icount, 4); - if (err != 4) { - perror("uio read:"); - break; - } - - } - return errno; -} - -</programlisting> - </para> -</sect1> - -</chapter> - -<chapter id="uio_hv_generic" xreflabel="Using Generic driver for Hyper-V VMBUS"> -<?dbhtml filename="uio_hv_generic.html"?> -<title>Generic Hyper-V UIO driver</title> - <para> - The generic driver is a kernel module named uio_hv_generic. - It supports devices on the Hyper-V VMBus similar to uio_pci_generic - on PCI bus. - </para> - -<sect1 id="uio_hv_generic_binding"> -<title>Making the driver recognize the device</title> - <para> -Since the driver does not declare any device GUID's, it will not get loaded -automatically and will not automatically bind to any devices, you must load it -and allocate id to the driver yourself. For example, to use the network device -GUID: - <programlisting> - modprobe uio_hv_generic - echo "f8615163-df3e-46c5-913f-f2d2f965ed0e" > /sys/bus/vmbus/drivers/uio_hv_generic/new_id - </programlisting> - </para> - <para> -If there already is a hardware specific kernel driver for the device, the -generic driver still won't bind to it, in this case if you want to use the -generic driver (why would you?) you'll have to manually unbind the hardware -specific driver and bind the generic driver, like this: - <programlisting> - echo -n vmbus-ed963694-e847-4b2a-85af-bc9cfc11d6f3 > /sys/bus/vmbus/drivers/hv_netvsc/unbind - echo -n vmbus-ed963694-e847-4b2a-85af-bc9cfc11d6f3 > /sys/bus/vmbus/drivers/uio_hv_generic/bind - </programlisting> - </para> - <para> -You can verify that the device has been bound to the driver -by looking for it in sysfs, for example like the following: - <programlisting> - ls -l /sys/bus/vmbus/devices/vmbus-ed963694-e847-4b2a-85af-bc9cfc11d6f3/driver - </programlisting> -Which if successful should print - <programlisting> - .../vmbus-ed963694-e847-4b2a-85af-bc9cfc11d6f3/driver -> ../../../bus/vmbus/drivers/uio_hv_generic - </programlisting> - </para> -</sect1> - -<sect1 id="uio_hv_generic_internals"> -<title>Things to know about uio_hv_generic</title> - <para> -On each interrupt, uio_hv_generic sets the Interrupt Disable bit. -This prevents the device from generating further interrupts -until the bit is cleared. The userspace driver should clear this -bit before blocking and waiting for more interrupts. - </para> -</sect1> -</chapter> - -<appendix id="app1"> -<title>Further information</title> -<itemizedlist> - <listitem><para> - <ulink url="http://www.osadl.org"> - OSADL homepage.</ulink> - </para></listitem> - <listitem><para> - <ulink url="http://www.linutronix.de"> - Linutronix homepage.</ulink> - </para></listitem> -</itemizedlist> -</appendix> - -</book> diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt index 72292308d0f5..6962cab997ef 100644 --- a/Documentation/IPMI.txt +++ b/Documentation/IPMI.txt @@ -257,7 +257,7 @@ and tell you when they come and go. Creating the User -To user the message handler, you must first create a user using +To use the message handler, you must first create a user using ipmi_create_user. The interface number specifies which SMI you want to connect to, and you must supply callback functions to be called when data comes in. The callback function can run at interrupt level, diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt index cd9c9f6a7cd9..1e37138027a3 100644 --- a/Documentation/PCI/MSI-HOWTO.txt +++ b/Documentation/PCI/MSI-HOWTO.txt @@ -162,8 +162,6 @@ The following old APIs to enable and disable MSI or MSI-X interrupts should not be used in new code: pci_enable_msi() /* deprecated */ - pci_enable_msi_range() /* deprecated */ - pci_enable_msi_exact() /* deprecated */ pci_disable_msi() /* deprecated */ pci_enable_msix_range() /* deprecated */ pci_enable_msix_exact() /* deprecated */ @@ -268,5 +266,5 @@ or disabled (0). If 0 is found in any of the msi_bus files belonging to bridges between the PCI root and the device, MSIs are disabled. It is also worth checking the device driver to see whether it supports MSIs. -For example, it may contain calls to pci_enable_msi_range() or -pci_enable_msix_range(). +For example, it may contain calls to pci_irq_alloc_vectors() with the +PCI_IRQ_MSI or PCI_IRQ_MSIX flags. diff --git a/Documentation/PCI/PCIEBUS-HOWTO.txt b/Documentation/PCI/PCIEBUS-HOWTO.txt index 6bd5f372adec..15f0bb3b5045 100644 --- a/Documentation/PCI/PCIEBUS-HOWTO.txt +++ b/Documentation/PCI/PCIEBUS-HOWTO.txt @@ -161,21 +161,13 @@ Since all service drivers of a PCI-PCI Bridge Port device are allowed to run simultaneously, below lists a few of possible resource conflicts with proposed solutions. -6.1 MSI Vector Resource - -The MSI capability structure enables a device software driver to call -pci_enable_msi to request MSI based interrupts. Once MSI interrupts -are enabled on a device, it stays in this mode until a device driver -calls pci_disable_msi to disable MSI interrupts and revert back to -INTx emulation mode. Since service drivers of the same PCI-PCI Bridge -port share the same physical device, if an individual service driver -calls pci_enable_msi/pci_disable_msi it may result unpredictable -behavior. For example, two service drivers run simultaneously on the -same physical Root Port. Both service drivers call pci_enable_msi to -request MSI based interrupts. A service driver may not know whether -any other service drivers have run on this Root Port. If either one -of them calls pci_disable_msi, it puts the other service driver -in a wrong interrupt mode. +6.1 MSI and MSI-X Vector Resource + +Once MSI or MSI-X interrupts are enabled on a device, it stays in this +mode until they are disabled again. Since service drivers of the same +PCI-PCI Bridge port share the same physical device, if an individual +service driver enables or disables MSI/MSI-X mode it may result +unpredictable behavior. To avoid this situation all service drivers are not permitted to switch interrupt mode on its device. The PCI Express Port Bus driver @@ -187,17 +179,6 @@ driver. Service drivers should use (struct pcie_device*)dev->irq to call request_irq/free_irq. In addition, the interrupt mode is stored in the field interrupt_mode of struct pcie_device. -6.2 MSI-X Vector Resources - -Similar to the MSI a device driver for an MSI-X capable device can -call pci_enable_msix to request MSI-X interrupts. All service drivers -are not permitted to switch interrupt mode on its device. The PCI -Express Port Bus driver is responsible for determining the interrupt -mode and this should be transparent to service drivers. Any attempt -by service driver to call pci_enable_msix/pci_disable_msix may -result unpredictable behavior. Service drivers should use -(struct pcie_device*)dev->irq and call request_irq/free_irq. - 6.3 PCI Memory/IO Mapped Regions Service drivers for PCI Express Power Management (PME), Advanced diff --git a/Documentation/PCI/pci-error-recovery.txt b/Documentation/PCI/pci-error-recovery.txt index ac26869c7db4..da3b2176d5da 100644 --- a/Documentation/PCI/pci-error-recovery.txt +++ b/Documentation/PCI/pci-error-recovery.txt @@ -78,7 +78,6 @@ struct pci_error_handlers { int (*error_detected)(struct pci_dev *dev, enum pci_channel_state); int (*mmio_enabled)(struct pci_dev *dev); - int (*link_reset)(struct pci_dev *dev); int (*slot_reset)(struct pci_dev *dev); void (*resume)(struct pci_dev *dev); }; @@ -104,8 +103,7 @@ if it implements any, it must implement error_detected(). If a callback is not implemented, the corresponding feature is considered unsupported. For example, if mmio_enabled() and resume() aren't there, then it is assumed that the driver is not doing any direct recovery and requires -a slot reset. If link_reset() is not implemented, the card is assumed to -not care about link resets. Typically a driver will want to know about +a slot reset. Typically a driver will want to know about a slot_reset(). The actual steps taken by a platform to recover from a PCI error @@ -232,25 +230,9 @@ proceeds to STEP 4 (Slot Reset) STEP 3: Link Reset ------------------ -The platform resets the link, and then calls the link_reset() callback -on all affected device drivers. This is a PCI-Express specific state +The platform resets the link. This is a PCI-Express specific step and is done whenever a non-fatal error has been detected that can be -"solved" by resetting the link. This call informs the driver of the -reset and the driver should check to see if the device appears to be -in working condition. - -The driver is not supposed to restart normal driver I/O operations -at this point. It should limit itself to "probing" the device to -check its recoverability status. If all is right, then the platform -will call resume() once all drivers have ack'd link_reset(). - - Result codes: - (identical to STEP 3 (MMIO Enabled) - -The platform then proceeds to either STEP 4 (Slot Reset) or STEP 5 -(Resume Operations). - ->>> The current powerpc implementation does not implement this callback. +"solved" by resetting the link. STEP 4: Slot Reset ------------------ diff --git a/Documentation/PCI/pci.txt b/Documentation/PCI/pci.txt index 77f49dc5be23..611a75e4366e 100644 --- a/Documentation/PCI/pci.txt +++ b/Documentation/PCI/pci.txt @@ -382,18 +382,18 @@ The fundamental difference between MSI and MSI-X is how multiple "vectors" get allocated. MSI requires contiguous blocks of vectors while MSI-X can allocate several individual ones. -MSI capability can be enabled by calling pci_enable_msi() or -pci_enable_msix() before calling request_irq(). This causes -the PCI support to program CPU vector data into the PCI device -capability registers. - -If your PCI device supports both, try to enable MSI-X first. -Only one can be enabled at a time. Many architectures, chip-sets, -or BIOSes do NOT support MSI or MSI-X and the call to pci_enable_msi/msix -will fail. This is important to note since many drivers have -two (or more) interrupt handlers: one for MSI/MSI-X and another for IRQs. -They choose which handler to register with request_irq() based on the -return value from pci_enable_msi/msix(). +MSI capability can be enabled by calling pci_alloc_irq_vectors() with the +PCI_IRQ_MSI and/or PCI_IRQ_MSIX flags before calling request_irq(). This +causes the PCI support to program CPU vector data into the PCI device +capability registers. Many architectures, chip-sets, or BIOSes do NOT +support MSI or MSI-X and a call to pci_alloc_irq_vectors with just +the PCI_IRQ_MSI and PCI_IRQ_MSIX flags will fail, so try to always +specify PCI_IRQ_LEGACY as well. + +Drivers that have different interrupt handlers for MSI/MSI-X and +legacy INTx should chose the right one based on the msi_enabled +and msix_enabled flags in the pci_dev structure after calling +pci_alloc_irq_vectors. There are (at least) two really good reasons for using MSI: 1) MSI is an exclusive interrupt vector by definition. diff --git a/Documentation/RCU/Design/Data-Structures/Data-Structures.html b/Documentation/RCU/Design/Data-Structures/Data-Structures.html index 7eb47ac25ad7..d583c653a703 100644 --- a/Documentation/RCU/Design/Data-Structures/Data-Structures.html +++ b/Documentation/RCU/Design/Data-Structures/Data-Structures.html @@ -4,7 +4,7 @@ <head><title>A Tour Through TREE_RCU's Data Structures [LWN.net]</title> <meta HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1"> - <p>January 27, 2016</p> + <p>December 18, 2016</p> <p>This article was contributed by Paul E. McKenney</p> <h3>Introduction</h3> @@ -31,9 +31,6 @@ to each other. Accessor Functions</a> </ol> -At the end we have the -<a href="#Answers to Quick Quizzes">answers to the quick quizzes</a>. - <h3><a name="Data-Structure Relationships">Data-Structure Relationships</a></h3> <p>RCU is for all intents and purposes a large state machine, and its diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/ExpRCUFlow.svg b/Documentation/RCU/Design/Expedited-Grace-Periods/ExpRCUFlow.svg new file mode 100644 index 000000000000..7c6c90bd02c9 --- /dev/null +++ b/Documentation/RCU/Design/Expedited-Grace-Periods/ExpRCUFlow.svg @@ -0,0 +1,830 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Creator: fig2dev Version 3.2 Patchlevel 5e --> + +<!-- CreationDate: Wed Dec 9 17:39:46 2015 --> + +<!-- Magnification: 3.000 --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="952.6817" + height="1219.6219" + viewBox="-66 -66 12729.905 16296.808" + id="svg2" + version="1.1" + inkscape:version="0.48.4 r9939" + sodipodi:docname="ExpRCUFlow.svg"> + <metadata + id="metadata94"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title /> + </cc:Work> + </rdf:RDF> + </metadata> + <defs + id="defs92"> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend" + style="overflow:visible"> + <path + id="path4146" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow1Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow1Mend" + style="overflow:visible"> + <path + id="path3852" + d="M 0,0 5,-5 -12.5,0 5,5 0,0 z" + style="fill-rule:evenodd;stroke:#000000;stroke-width:1pt" + transform="matrix(-0.4,0,0,-0.4,-4,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow1Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow1Mend-9" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path3852-7" + d="M 0,0 5,-5 -12.5,0 5,5 0,0 z" + style="fill-rule:evenodd;stroke:#000000;stroke-width:1pt" + transform="matrix(-0.4,0,0,-0.4,-4,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-7" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-6" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-1" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-4" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-16" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-8" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-160" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-5" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-78" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-66" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-8" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-56" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-19" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-89" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-85" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-3" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-73" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-55" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-5" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-88" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-198" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-2" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-4" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-22" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="marker5072" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path5074" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-87" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-63" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-6" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-26" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-0" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-51" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + </defs> + <sodipodi:namedview + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1" + objecttolerance="10" + gridtolerance="10" + guidetolerance="10" + inkscape:pageopacity="0" + inkscape:pageshadow="2" + inkscape:window-width="1090" + inkscape:window-height="1148" + id="namedview90" + showgrid="true" + inkscape:zoom="0.80021373" + inkscape:cx="462.49289" + inkscape:cy="623.19585" + inkscape:window-x="557" + inkscape:window-y="24" + inkscape:window-maximized="0" + inkscape:current-layer="g4" + inkscape:snap-grids="false" + fit-margin-top="5" + fit-margin-right="5" + fit-margin-bottom="5" + fit-margin-left="5" /> + <g + style="fill:none;stroke-width:0.025in" + id="g4" + transform="translate(23.312813,523.41305)"> + <!-- Line: box --> + <!-- Line: box --> + <!-- Line: box --> + <!-- Line: box --> + <!-- Line: box --> + <!-- Line: box --> + <!-- Line: box --> + <!-- Line --> + <!-- Arrowhead on XXXpoint 11475 2250 - 11475 3465--> + <!-- Line: box --> + <!-- Line: box --> + <!-- Line: box --> + <!-- Line: box --> + <!-- Line: box --> + <!-- Line --> + <!-- Arrowhead on XXXpoint 11475 5625 - 11475 6840--> + <!-- Line --> + <!-- Arrowhead on XXXpoint 7875 225 - 10665 225--> + <!-- Line --> + <!-- Arrowhead on XXXpoint 9675 675 - 7785 675--> + <!-- Line --> + <!-- Arrowhead on XXXpoint 9675 4725 - 10665 4725--> + <!-- Line --> + <!-- Arrowhead on XXXpoint 9225 5175 - 10665 5175--> + <!-- Line --> + <!-- Arrowhead on XXXpoint 8775 11475 - 10665 11475--> + <!-- Line: box --> + <!-- Line --> + <!-- Arrowhead on XXXpoint 11475 9000 - 11475 10215--> + <!-- Text --> + <!-- Text --> + <!-- Text --> + <!-- Text --> + <!-- Text --> + <!-- Text --> + <!-- Text --> + <!-- Text --> + <!-- Text --> + <!-- Text --> + <!-- Text --> + <!-- Text --> + <!-- Text --> + <g + id="g4104" + transform="translate(-1068.9745,0)"> + <rect + transform="matrix(-0.70710678,0.70710678,-0.70710678,-0.70710678,0,0)" + y="-7383.8755" + x="-6124.8989" + height="1966.2251" + width="1953.6969" + id="rect3032-1-0" + style="fill:#96ff96;fill-opacity:1;stroke:#000000;stroke-width:45.00382233;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <text + sodipodi:linespacing="125%" + id="text4098" + y="818.40338" + x="8168.2671" + style="font-size:267.24359131px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + xml:space="preserve"><tspan + y="818.40338" + x="8168.2671" + id="tspan4100" + sodipodi:role="line">Idle or</tspan><tspan + id="tspan4102" + y="1152.4579" + x="8168.2671" + sodipodi:role="line">offline?</tspan></text> + </g> + <g + id="g4114" + transform="translate(0,147.96969)"> + <rect + id="rect6" + style="fill:#87cfff;stroke:#000000;stroke-width:45.00382233;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none" + rx="0" + height="1475.6636" + width="4401.7612" + y="0" + x="0" /> + <text + sodipodi:linespacing="125%" + id="text4110" + y="835.11212" + x="2206.4917" + style="font-size:267.24359131px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + xml:space="preserve"><tspan + y="835.11212" + x="2206.4917" + id="tspan4112" + sodipodi:role="line">CPU N Start</tspan></text> + </g> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;marker-end:url(#Arrow2Lend)" + d="M 4432.5052,897.4924 5684.8749,880.79414" + id="path4119" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;marker-end:url(#Arrow2Lend)" + d="M 8503.0006,874.12161 9755.3703,857.42334" + id="path4119-8" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <text + xml:space="preserve" + style="font-size:267.24359131px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="8617.0977" + y="705.50983" + id="text4593" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4595" + x="8617.0977" + y="705.50983">Y</tspan></text> + <g + style="fill:none;stroke-width:0.025in" + id="g4114-9" + transform="translate(9722.4732,131.27105)"> + <rect + id="rect6-0" + style="fill:#87cfff;stroke:#000000;stroke-width:45.00382233;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none" + rx="0" + height="1425.5687" + width="2748.6331" + y="0" + x="80.17308" /> + <text + sodipodi:linespacing="125%" + id="text4110-5" + y="835.11212" + x="1460.1007" + style="font-size:267.24359131px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + xml:space="preserve"><tspan + y="835.11212" + x="1460.1007" + id="tspan4112-9" + sodipodi:role="line">Done</tspan></text> + </g> + <g + style="fill:none;stroke-width:0.025in" + id="g4114-5" + transform="translate(0,3705.3456)"> + <rect + id="rect6-1" + style="fill:#87cfff;stroke:#000000;stroke-width:45.00382233;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none" + rx="0" + height="1475.6636" + width="4401.7612" + y="0" + x="0" /> + <text + sodipodi:linespacing="125%" + id="text4110-9" + y="835.11212" + x="2206.4917" + style="font-size:267.24359131px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + xml:space="preserve"><tspan + y="835.11212" + x="2206.4917" + sodipodi:role="line" + id="tspan4776">Send IPI to CPU N</tspan></text> + </g> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;marker-end:url(#Arrow2Lend)" + d="M 7102.5627,2263.5171 4430.8404,3682.8694" + id="path4119-3" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <g + style="fill:none;stroke-width:0.025in" + id="g4104-1" + transform="translate(-1065.3349,6403.5782)"> + <rect + transform="matrix(-0.70710678,0.70710678,-0.70710678,-0.70710678,0,0)" + y="-7383.8755" + x="-6124.8989" + height="1966.2251" + width="1953.6969" + id="rect3032-1-0-6" + style="fill:#96ff96;fill-opacity:1;stroke:#000000;stroke-width:45.00382233;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <text + sodipodi:linespacing="125%" + id="text4098-3" + y="482.00006" + x="8168.2671" + style="font-size:267.24359131px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + xml:space="preserve"><tspan + id="tspan4102-8" + y="482.00006" + x="8168.2671" + sodipodi:role="line">In RCU</tspan><tspan + y="816.05457" + x="8168.2671" + sodipodi:role="line" + id="tspan4833">read-side</tspan><tspan + y="1150.109" + x="8168.2671" + sodipodi:role="line" + id="tspan4835">critical</tspan><tspan + y="1484.1636" + x="8168.2671" + sodipodi:role="line" + id="tspan4837">section?</tspan></text> + </g> + <text + xml:space="preserve" + style="font-size:267.24362183px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="6463.0864" + y="2285.6765" + id="text4593-0" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4595-6" + x="6463.0864" + y="2285.6765">N</tspan></text> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:40.08654108, 80.17308215;stroke-dashoffset:0;marker-end:url(#Arrow2Lend)" + d="m 2189.1897,5219.361 16.6983,1252.3697" + id="path4119-0" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <g + style="fill:none;stroke-width:0.025in" + id="g4114-5-2" + transform="translate(0,6551.5479)"> + <rect + id="rect6-1-7" + style="fill:#87cfff;stroke:#000000;stroke-width:45.00382233;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none" + rx="0" + height="1475.6636" + width="4401.7612" + y="0" + x="0" /> + <text + sodipodi:linespacing="125%" + id="text4110-9-5" + y="835.11212" + x="2206.4917" + style="font-size:267.24359131px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + xml:space="preserve"><tspan + y="835.11212" + x="2206.4917" + sodipodi:role="line" + id="tspan4776-5">IPI Handler</tspan></text> + </g> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;marker-end:url(#Arrow2Lend)" + d="m 4432.5052,7297.9678 1252.3697,-16.6982" + id="path4119-2" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;marker-end:url(#Arrow2Lend)" + d="m 8503.0013,7278.6595 1252.369,-16.6982" + id="path4119-8-7" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <text + xml:space="preserve" + style="font-size:267.24362183px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="8617.0977" + y="7110.0186" + id="text4593-4" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4595-0" + x="8617.0977" + y="7110.0186">N</tspan></text> + <g + style="fill:none;stroke-width:0.025in" + id="g4114-9-3" + transform="translate(9722.4732,6535.809)"> + <rect + id="rect6-0-7" + style="fill:#87cfff;stroke:#000000;stroke-width:45.00382233;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none" + rx="0" + height="1425.5687" + width="2748.6331" + y="29.467337" + x="80.17308" /> + <text + sodipodi:linespacing="125%" + id="text4110-5-7" + y="503.71591" + x="1460.1007" + style="font-size:267.24359131px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + xml:space="preserve"><tspan + y="503.71591" + x="1460.1007" + id="tspan4112-9-0" + sodipodi:role="line">Report CPU</tspan><tspan + y="837.77039" + x="1460.1007" + sodipodi:role="line" + id="tspan4923">Quiescent</tspan><tspan + y="1171.825" + x="1460.1007" + sodipodi:role="line" + id="tspan4925">State</tspan></text> + </g> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:40.08654335, 80.17308669;stroke-dashoffset:0;marker-end:url(#Arrow2Lend)" + d="m 7102.5627,8725.7454 16.6983,1252.3697" + id="path4119-0-0" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <text + xml:space="preserve" + style="font-size:267.24362183px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="6797.0522" + y="9018.6807" + id="text4593-3" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4595-2" + x="6797.0522" + y="9018.6807">Y</tspan></text> + <g + style="fill:none;stroke-width:0.025in" + id="g4114-9-3-8" + transform="translate(-80.17308,11381.108)"> + <rect + id="rect6-0-7-5" + style="fill:#87cfff;stroke:#000000;stroke-width:45.00382233;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none" + rx="0" + height="1425.5687" + width="2748.6331" + y="29.467337" + x="80.17308" /> + <text + sodipodi:linespacing="125%" + id="text4110-5-7-6" + y="841.88086" + x="1460.1007" + style="font-size:267.24359131px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + xml:space="preserve"><tspan + y="841.88086" + x="1460.1007" + sodipodi:role="line" + id="tspan4925-1">rcu_read_unlock()</tspan></text> + </g> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:40.08654562, 80.17309124;stroke-dashoffset:0;marker-end:url(#Arrow2Lend)" + d="m 1362.6256,10071.26 16.6983,1252.369" + id="path4119-0-0-7" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;marker-end:url(#Arrow2Lend)" + d="m 1362.6256,12883.919 16.6983,1252.369" + id="path4119-0-0-7-7" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <g + style="fill:none;stroke-width:0.025in" + id="g4114-9-3-8-1" + transform="translate(9722.4732,11389.458)"> + <rect + id="rect6-0-7-5-1" + style="fill:#87cfff;stroke:#000000;stroke-width:45.00382233;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none" + rx="0" + height="1425.5687" + width="2748.6331" + y="29.467337" + x="80.17308" /> + <text + sodipodi:linespacing="125%" + id="text4110-5-7-6-2" + y="841.88086" + x="1460.1007" + style="font-size:267.24359131px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + xml:space="preserve"><tspan + y="841.88086" + x="1460.1007" + sodipodi:role="line" + id="tspan4925-1-2">Context Switch</tspan></text> + </g> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:40.08654789, 80.17309578;stroke-dashoffset:0;marker-end:url(#Arrow2Lend)" + d="m 11165.272,10071.26 16.698,1252.369" + id="path4119-0-0-7-8" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <g + style="fill:none;stroke-width:0.025in" + id="g4114-9-3-9" + transform="translate(-80.17308,14163.046)"> + <rect + id="rect6-0-7-1" + style="fill:#87cfff;stroke:#000000;stroke-width:45.00382233;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none" + rx="0" + height="1425.5687" + width="2748.6331" + y="29.467337" + x="80.17308" /> + <text + sodipodi:linespacing="125%" + id="text4110-5-7-3" + y="503.71591" + x="1460.1007" + style="font-size:267.24359131px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + xml:space="preserve"><tspan + y="503.71591" + x="1460.1007" + id="tspan4112-9-0-4" + sodipodi:role="line">Report CPU</tspan><tspan + y="837.77039" + x="1460.1007" + sodipodi:role="line" + id="tspan4923-3">and Task</tspan><tspan + y="1171.825" + x="1460.1007" + sodipodi:role="line" + id="tspan4925-9">Quiescent States</tspan></text> + </g> + <g + style="fill:none;stroke-width:0.025in" + id="g4114-9-3-8-1-8" + transform="translate(5663.2978,11389.458)"> + <rect + id="rect6-0-7-5-1-1" + style="fill:#87cfff;stroke:#000000;stroke-width:45.00382233;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none" + rx="0" + height="1425.5687" + width="2748.6331" + y="29.467337" + x="80.17308" /> + <text + sodipodi:linespacing="125%" + id="text4110-5-7-6-2-4" + y="841.88086" + x="1460.1007" + style="font-size:267.24359131px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + xml:space="preserve"><tspan + y="841.88086" + x="1460.1007" + sodipodi:role="line" + id="tspan4925-1-2-4">Enqueue Task</tspan></text> + </g> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;marker-end:url(#Arrow2Lend)" + d="M 9827.612,12141.988 8575.243,12125.29" + id="path4119-8-7-5" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;marker-end:url(#Arrow2Lend)" + d="m 7106.0965,12818.962 16.6983,1252.369" + id="path4119-0-0-7-7-5" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <g + style="fill:none;stroke-width:0.025in" + id="g4114-9-3-9-2" + transform="translate(5663.2978,14098.088)"> + <rect + id="rect6-0-7-1-8" + style="fill:#87cfff;stroke:#000000;stroke-width:45.00382233;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none" + rx="0" + height="1425.5687" + width="2748.6331" + y="29.467337" + x="80.17308" /> + <text + sodipodi:linespacing="125%" + id="text4110-5-7-3-4" + y="503.71591" + x="1460.1007" + style="font-size:267.24359131px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + xml:space="preserve"><tspan + y="503.71591" + x="1460.1007" + sodipodi:role="line" + id="tspan4923-3-2">Report CPU</tspan><tspan + y="837.77039" + x="1460.1007" + sodipodi:role="line" + id="tspan4925-9-9">Quiescent</tspan><tspan + y="1171.825" + x="1460.1007" + sodipodi:role="line" + id="tspan5239">State</tspan></text> + </g> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:40.08654562, 80.17309124;stroke-dashoffset:0;marker-end:url(#Arrow2Lend)" + d="M 5733.305,14095.542 2761.014,12809.774" + id="path4119-0-0-2" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:40.08654107, 80.17308214;stroke-dashoffset:0" + d="m 1353.3524,10079.499 9701.6916,0 100.189,-16.698" + id="path5265" + inkscape:connector-curvature="0" + sodipodi:nodetypes="ccc" /> + </g> +</svg> diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/ExpSchedFlow.svg b/Documentation/RCU/Design/Expedited-Grace-Periods/ExpSchedFlow.svg new file mode 100644 index 000000000000..e4233ac93c2b --- /dev/null +++ b/Documentation/RCU/Design/Expedited-Grace-Periods/ExpSchedFlow.svg @@ -0,0 +1,826 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Creator: fig2dev Version 3.2 Patchlevel 5e --> + +<!-- CreationDate: Wed Dec 9 17:39:46 2015 --> + +<!-- Magnification: 3.000 --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="952.6817" + height="1425.6191" + viewBox="-66 -66 12729.905 19049.38" + id="svg2" + version="1.1" + inkscape:version="0.48.4 r9939" + sodipodi:docname="ExpSchedFlow.svg"> + <metadata + id="metadata94"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title /> + </cc:Work> + </rdf:RDF> + </metadata> + <defs + id="defs92"> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend" + style="overflow:visible"> + <path + id="path4146" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow1Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow1Mend" + style="overflow:visible"> + <path + id="path3852" + d="M 0,0 5,-5 -12.5,0 5,5 0,0 z" + style="fill-rule:evenodd;stroke:#000000;stroke-width:1pt" + transform="matrix(-0.4,0,0,-0.4,-4,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow1Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow1Mend-9" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path3852-7" + d="M 0,0 5,-5 -12.5,0 5,5 0,0 z" + style="fill-rule:evenodd;stroke:#000000;stroke-width:1pt" + transform="matrix(-0.4,0,0,-0.4,-4,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-7" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-6" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-1" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-4" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-16" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-8" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-160" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-5" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-78" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-66" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-8" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-56" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-19" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-89" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-85" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-3" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-73" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-55" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-5" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-88" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-198" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-2" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-4" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-22" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="marker5072" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path5074" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-87" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-63" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-6" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-26" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-0" + style="overflow:visible"> + <path + inkscape:connector-curvature="0" + id="path4146-51" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-58" + style="overflow:visible"> + <path + id="path4146-61" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + </defs> + <sodipodi:namedview + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1" + objecttolerance="10" + gridtolerance="10" + guidetolerance="10" + inkscape:pageopacity="0" + inkscape:pageshadow="2" + inkscape:window-width="1090" + inkscape:window-height="1148" + id="namedview90" + showgrid="true" + inkscape:zoom="0.80021373" + inkscape:cx="462.49289" + inkscape:cy="473.6718" + inkscape:window-x="770" + inkscape:window-y="24" + inkscape:window-maximized="0" + inkscape:current-layer="g4114-9-3-9" + inkscape:snap-grids="false" + fit-margin-top="5" + fit-margin-right="5" + fit-margin-bottom="5" + fit-margin-left="5" /> + <g + style="fill:none;stroke-width:0.025in" + id="g4" + transform="translate(23.312814,523.41265)"> + <!-- Line: box --> + <!-- Line: box --> + <!-- Line: box --> + <!-- Line: box --> + <!-- Line: box --> + <!-- Line: box --> + <!-- Line: box --> + <!-- Line --> + <!-- Arrowhead on XXXpoint 11475 2250 - 11475 3465--> + <!-- Line: box --> + <!-- Line: box --> + <!-- Line: box --> + <!-- Line: box --> + <!-- Line: box --> + <!-- Line --> + <!-- Arrowhead on XXXpoint 11475 5625 - 11475 6840--> + <!-- Line --> + <!-- Arrowhead on XXXpoint 7875 225 - 10665 225--> + <!-- Line --> + <!-- Arrowhead on XXXpoint 9675 675 - 7785 675--> + <!-- Line --> + <!-- Arrowhead on XXXpoint 9675 4725 - 10665 4725--> + <!-- Line --> + <!-- Arrowhead on XXXpoint 9225 5175 - 10665 5175--> + <!-- Line --> + <!-- Arrowhead on XXXpoint 8775 11475 - 10665 11475--> + <!-- Line: box --> + <!-- Line --> + <!-- Arrowhead on XXXpoint 11475 9000 - 11475 10215--> + <!-- Text --> + <!-- Text --> + <!-- Text --> + <!-- Text --> + <!-- Text --> + <!-- Text --> + <!-- Text --> + <!-- Text --> + <!-- Text --> + <!-- Text --> + <!-- Text --> + <!-- Text --> + <!-- Text --> + <g + id="g4104" + transform="translate(-1068.9745,0)"> + <rect + transform="matrix(-0.70710678,0.70710678,-0.70710678,-0.70710678,0,0)" + y="-7383.8755" + x="-6124.8989" + height="1966.2251" + width="1953.6969" + id="rect3032-1-0" + style="fill:#96ff96;fill-opacity:1;stroke:#000000;stroke-width:45.00382233;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <text + sodipodi:linespacing="125%" + id="text4098" + y="818.40338" + x="8168.2671" + style="font-size:267.24359131px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + xml:space="preserve"><tspan + y="818.40338" + x="8168.2671" + id="tspan4100" + sodipodi:role="line">Idle or</tspan><tspan + id="tspan4102" + y="1152.4579" + x="8168.2671" + sodipodi:role="line">offline?</tspan></text> + </g> + <g + id="g4114" + transform="translate(0,147.96969)"> + <rect + id="rect6" + style="fill:#87cfff;stroke:#000000;stroke-width:45.00382233;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none" + rx="0" + height="1475.6636" + width="4401.7612" + y="0" + x="0" /> + <text + sodipodi:linespacing="125%" + id="text4110" + y="835.11212" + x="2206.4917" + style="font-size:267.24359131px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + xml:space="preserve"><tspan + y="835.11212" + x="2206.4917" + id="tspan4112" + sodipodi:role="line">CPU N Start</tspan></text> + </g> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;marker-end:url(#Arrow2Lend)" + d="M 4432.5052,897.4924 5684.8749,880.79414" + id="path4119" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;marker-end:url(#Arrow2Lend)" + d="M 8503.0006,874.12161 9755.3703,857.42334" + id="path4119-8" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <text + xml:space="preserve" + style="font-size:267.24359131px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="8617.0977" + y="705.50983" + id="text4593" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4595" + x="8617.0977" + y="705.50983">Y</tspan></text> + <g + style="fill:none;stroke-width:0.025in" + id="g4114-9" + transform="translate(9722.4732,131.27105)"> + <rect + id="rect6-0" + style="fill:#87cfff;stroke:#000000;stroke-width:45.00382233;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none" + rx="0" + height="1425.5687" + width="2748.6331" + y="0" + x="80.17308" /> + <text + sodipodi:linespacing="125%" + id="text4110-5" + y="835.11212" + x="1460.1007" + style="font-size:267.24359131px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + xml:space="preserve"><tspan + y="835.11212" + x="1460.1007" + id="tspan4112-9" + sodipodi:role="line">Done</tspan></text> + </g> + <g + style="fill:none;stroke-width:0.025in" + id="g4114-5" + transform="translate(0,3705.3456)"> + <rect + id="rect6-1" + style="fill:#87cfff;stroke:#000000;stroke-width:45.00382233;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none" + rx="0" + height="1475.6636" + width="4401.7612" + y="0" + x="0" /> + <text + sodipodi:linespacing="125%" + id="text4110-9" + y="835.11212" + x="2206.4917" + style="font-size:267.24359131px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + xml:space="preserve"><tspan + y="835.11212" + x="2206.4917" + sodipodi:role="line" + id="tspan4776">Send IPI to CPU N</tspan></text> + </g> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;marker-end:url(#Arrow2Lend)" + d="M 7102.5627,2263.5171 4430.8404,3682.8694" + id="path4119-3" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <g + style="fill:none;stroke-width:0.025in" + id="g4104-1" + transform="translate(-1065.3349,6403.5782)"> + <rect + transform="matrix(-0.70710678,0.70710678,-0.70710678,-0.70710678,0,0)" + y="-7383.8755" + x="-6124.8989" + height="1966.2251" + width="1953.6969" + id="rect3032-1-0-6" + style="fill:#96ff96;fill-opacity:1;stroke:#000000;stroke-width:45.00382233;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <text + sodipodi:linespacing="125%" + id="text4098-3" + y="985.4306" + x="8168.2671" + style="font-size:267.24359131px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + xml:space="preserve"><tspan + y="985.4306" + x="8168.2671" + sodipodi:role="line" + id="tspan3109">CPU idle?</tspan></text> + </g> + <text + xml:space="preserve" + style="font-size:267.24362183px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="6463.0864" + y="2285.6765" + id="text4593-0" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4595-6" + x="6463.0864" + y="2285.6765">N</tspan></text> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:40.08654108, 80.17308215;stroke-dashoffset:0;marker-end:url(#Arrow2Lend)" + d="m 2189.1897,5219.361 16.6983,1252.3697" + id="path4119-0" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <g + style="fill:none;stroke-width:0.025in" + id="g4114-5-2" + transform="translate(0,6551.5479)"> + <rect + id="rect6-1-7" + style="fill:#87cfff;stroke:#000000;stroke-width:45.00382233;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none" + rx="0" + height="1475.6636" + width="4401.7612" + y="0" + x="0" /> + <text + sodipodi:linespacing="125%" + id="text4110-9-5" + y="835.11212" + x="2206.4917" + style="font-size:267.24359131px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + xml:space="preserve"><tspan + y="835.11212" + x="2206.4917" + sodipodi:role="line" + id="tspan4776-5">IPI Handler</tspan></text> + </g> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;marker-end:url(#Arrow2Lend)" + d="m 4432.5052,7297.9678 1252.3697,-16.6982" + id="path4119-2" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;marker-end:url(#Arrow2Lend)" + d="m 8503.0013,7278.6595 1252.369,-16.6982" + id="path4119-8-7" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <text + xml:space="preserve" + style="font-size:267.24362183px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="8617.0977" + y="7110.0186" + id="text4593-4" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4595-0" + x="8617.0977" + y="7110.0186">Y</tspan></text> + <g + style="fill:none;stroke-width:0.025in" + id="g4114-9-3" + transform="translate(9722.4732,6535.809)"> + <rect + id="rect6-0-7" + style="fill:#87cfff;stroke:#000000;stroke-width:45.00382233;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none" + rx="0" + height="1425.5687" + width="2748.6331" + y="29.467337" + x="80.17308" /> + <text + sodipodi:linespacing="125%" + id="text4110-5-7" + y="503.71591" + x="1460.1007" + style="font-size:267.24359131px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + xml:space="preserve"><tspan + y="503.71591" + x="1460.1007" + id="tspan4112-9-0" + sodipodi:role="line">Report CPU</tspan><tspan + y="837.77039" + x="1460.1007" + sodipodi:role="line" + id="tspan4923">Quiescent</tspan><tspan + y="1171.825" + x="1460.1007" + sodipodi:role="line" + id="tspan4925">State</tspan></text> + </g> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:40.08654335, 80.17308669;stroke-dashoffset:0;marker-end:url(#Arrow2Lend)" + d="m 7102.5627,11478.337 16.6983,1252.35" + id="path4119-0-0" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <text + xml:space="preserve" + style="font-size:267.24362183px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="6797.0522" + y="9018.6807" + id="text4593-3" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4595-2" + x="6797.0522" + y="9018.6807">N</tspan></text> + <g + style="fill:none;stroke-width:0.025in" + id="g4114-9-3-8" + transform="translate(-80.17308,14133.68)"> + <rect + id="rect6-0-7-5" + style="fill:#87cfff;stroke:#000000;stroke-width:45.00382233;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none" + rx="0" + height="1425.5687" + width="2748.6331" + y="29.467337" + x="80.17308" /> + <text + sodipodi:linespacing="125%" + id="text4110-5-7-6" + y="841.88086" + x="1460.1007" + style="font-size:267.24359131px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + xml:space="preserve"><tspan + y="841.88086" + x="1460.1007" + sodipodi:role="line" + id="tspan4925-1">Context Switch</tspan></text> + </g> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:40.08654562, 80.17309124;stroke-dashoffset:0;marker-end:url(#Arrow2Lend)" + d="m 1362.6256,12823.832 16.6983,1252.369" + id="path4119-0-0-7" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;marker-end:url(#Arrow2Lend)" + d="m 1362.6256,15636.491 16.6983,1252.369" + id="path4119-0-0-7-7" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <g + style="fill:none;stroke-width:0.025in" + id="g4114-9-3-8-1" + transform="translate(9722.4732,14142.03)"> + <rect + id="rect6-0-7-5-1" + style="fill:#87cfff;stroke:#000000;stroke-width:45.00382233;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none" + rx="0" + height="1425.5687" + width="2748.6331" + y="29.467337" + x="80.17308" /> + <text + sodipodi:linespacing="125%" + id="text4110-5-7-6-2" + y="841.88086" + x="1460.1007" + style="font-size:267.24359131px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + xml:space="preserve"><tspan + y="841.88086" + x="1460.1007" + sodipodi:role="line" + id="tspan4925-1-2">CPU Offline</tspan></text> + </g> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:40.08654789, 80.17309578;stroke-dashoffset:0;marker-end:url(#Arrow2Lend)" + d="m 11165.272,12823.832 16.698,1252.369" + id="path4119-0-0-7-8" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <g + style="fill:none;stroke-width:0.025in" + id="g4114-9-3-9" + transform="translate(-80.17308,16915.618)"> + <rect + id="rect6-0-7-1" + style="fill:#87cfff;stroke:#000000;stroke-width:45.00382233;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none" + rx="0" + height="1425.5687" + width="2748.6331" + y="29.467337" + x="80.17308" /> + <text + sodipodi:linespacing="125%" + id="text4110-5-7-3" + y="505.47754" + x="1460.1007" + style="font-size:267.24359131px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + xml:space="preserve"><tspan + y="505.47754" + x="1460.1007" + id="tspan4112-9-0-4" + sodipodi:role="line">Report CPU</tspan><tspan + y="839.53204" + x="1460.1007" + sodipodi:role="line" + id="tspan4925-9">Quiescent</tspan><tspan + y="1173.5865" + x="1460.1007" + sodipodi:role="line" + id="tspan3168">State</tspan></text> + </g> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;marker-end:url(#Arrow2Lend)" + d="m 11165.272,15571.534 16.698,1252.369" + id="path4119-0-0-7-7-5" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <g + style="fill:none;stroke-width:0.025in" + id="g4114-9-3-9-2" + transform="translate(9722.4732,16850.66)"> + <rect + id="rect6-0-7-1-8" + style="fill:#87cfff;stroke:#000000;stroke-width:45.00382233;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none" + rx="0" + height="1425.5687" + width="2748.6331" + y="29.467337" + x="80.17308" /> + <text + sodipodi:linespacing="125%" + id="text4110-5-7-3-4" + y="503.71591" + x="1460.1007" + style="font-size:267.24359131px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + xml:space="preserve"><tspan + y="503.71591" + x="1460.1007" + sodipodi:role="line" + id="tspan4923-3-2">Report CPU</tspan><tspan + y="837.77039" + x="1460.1007" + sodipodi:role="line" + id="tspan4925-9-9">Quiescent</tspan><tspan + y="1171.825" + x="1460.1007" + sodipodi:role="line" + id="tspan5239">State</tspan></text> + </g> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:40.08654107, 80.17308214;stroke-dashoffset:0" + d="m 1353.3524,12832.071 9701.6916,0 100.189,-16.698" + id="path5265" + inkscape:connector-curvature="0" + sodipodi:nodetypes="ccc" /> + <path + style="fill:none;stroke:#000000;stroke-width:40.08654022;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;marker-end:url(#Arrow2Lend)" + d="m 7112.6465,8669.1867 16.6983,1252.369" + id="path4119-0-0-7-7-5-7" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <g + style="fill:none;stroke-width:0.025in" + id="g4114-9-3-8-1-8-3" + transform="translate(5663.1399,9972.3627)"> + <rect + id="rect6-0-7-5-1-1-9" + style="fill:#87cfff;stroke:#000000;stroke-width:45.00382233;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none" + rx="0" + height="1425.5687" + width="2748.6331" + y="29.467337" + x="80.17308" /> + <text + sodipodi:linespacing="125%" + id="text4110-5-7-6-2-4-0" + y="841.88086" + x="1460.1007" + style="font-size:267.24359131px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + xml:space="preserve"><tspan + y="841.88086" + x="1460.1007" + sodipodi:role="line" + id="tspan4925-1-2-4-5">reched_cpu()</tspan></text> + </g> + </g> +</svg> diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html b/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html new file mode 100644 index 000000000000..7a3194c5559a --- /dev/null +++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html @@ -0,0 +1,626 @@ +<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" + "http://www.w3.org/TR/html4/loose.dtd"> + <html> + <head><title>A Tour Through TREE_RCU's Expedited Grace Periods</title> + <meta HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1"> + +<h2>Introduction</h2> + +This document describes RCU's expedited grace periods. +Unlike RCU's normal grace periods, which accept long latencies to attain +high efficiency and minimal disturbance, expedited grace periods accept +lower efficiency and significant disturbance to attain shorter latencies. + +<p> +There are three flavors of RCU (RCU-bh, RCU-preempt, and RCU-sched), +but only two flavors of expedited grace periods because the RCU-bh +expedited grace period maps onto the RCU-sched expedited grace period. +Each of the remaining two implementations is covered in its own section. + +<ol> +<li> <a href="#Expedited Grace Period Design"> + Expedited Grace Period Design</a> +<li> <a href="#RCU-preempt Expedited Grace Periods"> + RCU-preempt Expedited Grace Periods</a> +<li> <a href="#RCU-sched Expedited Grace Periods"> + RCU-sched Expedited Grace Periods</a> +<li> <a href="#Expedited Grace Period and CPU Hotplug"> + Expedited Grace Period and CPU Hotplug</a> +<li> <a href="#Expedited Grace Period Refinements"> + Expedited Grace Period Refinements</a> +</ol> + +<h2><a name="Expedited Grace Period Design"> +Expedited Grace Period Design</a></h2> + +<p> +The expedited RCU grace periods cannot be accused of being subtle, +given that they for all intents and purposes hammer every CPU that +has not yet provided a quiescent state for the current expedited +grace period. +The one saving grace is that the hammer has grown a bit smaller +over time: The old call to <tt>try_stop_cpus()</tt> has been +replaced with a set of calls to <tt>smp_call_function_single()</tt>, +each of which results in an IPI to the target CPU. +The corresponding handler function checks the CPU's state, motivating +a faster quiescent state where possible, and triggering a report +of that quiescent state. +As always for RCU, once everything has spent some time in a quiescent +state, the expedited grace period has completed. + +<p> +The details of the <tt>smp_call_function_single()</tt> handler's +operation depend on the RCU flavor, as described in the following +sections. + +<h2><a name="RCU-preempt Expedited Grace Periods"> +RCU-preempt Expedited Grace Periods</a></h2> + +<p> +The overall flow of the handling of a given CPU by an RCU-preempt +expedited grace period is shown in the following diagram: + +<p><img src="ExpRCUFlow.svg" alt="ExpRCUFlow.svg" width="55%"> + +<p> +The solid arrows denote direct action, for example, a function call. +The dotted arrows denote indirect action, for example, an IPI +or a state that is reached after some time. + +<p> +If a given CPU is offline or idle, <tt>synchronize_rcu_expedited()</tt> +will ignore it because idle and offline CPUs are already residing +in quiescent states. +Otherwise, the expedited grace period will use +<tt>smp_call_function_single()</tt> to send the CPU an IPI, which +is handled by <tt>sync_rcu_exp_handler()</tt>. + +<p> +However, because this is preemptible RCU, <tt>sync_rcu_exp_handler()</tt> +can check to see if the CPU is currently running in an RCU read-side +critical section. +If not, the handler can immediately report a quiescent state. +Otherwise, it sets flags so that the outermost <tt>rcu_read_unlock()</tt> +invocation will provide the needed quiescent-state report. +This flag-setting avoids the previous forced preemption of all +CPUs that might have RCU read-side critical sections. +In addition, this flag-setting is done so as to avoid increasing +the overhead of the common-case fastpath through the scheduler. + +<p> +Again because this is preemptible RCU, an RCU read-side critical section +can be preempted. +When that happens, RCU will enqueue the task, which will the continue to +block the current expedited grace period until it resumes and finds its +outermost <tt>rcu_read_unlock()</tt>. +The CPU will report a quiescent state just after enqueuing the task because +the CPU is no longer blocking the grace period. +It is instead the preempted task doing the blocking. +The list of blocked tasks is managed by <tt>rcu_preempt_ctxt_queue()</tt>, +which is called from <tt>rcu_preempt_note_context_switch()</tt>, which +in turn is called from <tt>rcu_note_context_switch()</tt>, which in +turn is called from the scheduler. + +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + Why not just have the expedited grace period check the + state of all the CPUs? + After all, that would avoid all those real-time-unfriendly IPIs. +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + Because we want the RCU read-side critical sections to run fast, + which means no memory barriers. + Therefore, it is not possible to safely check the state from some + other CPU. + And even if it was possible to safely check the state, it would + still be necessary to IPI the CPU to safely interact with the + upcoming <tt>rcu_read_unlock()</tt> invocation, which means that + the remote state testing would not help the worst-case + latency that real-time applications care about. + + <p><font color="ffffff">One way to prevent your real-time + application from getting hit with these IPIs is to + build your kernel with <tt>CONFIG_NO_HZ_FULL=y</tt>. + RCU would then perceive the CPU running your application + as being idle, and it would be able to safely detect that + state without needing to IPI the CPU. +</font></td></tr> +<tr><td> </td></tr> +</table> + +<p> +Please note that this is just the overall flow: +Additional complications can arise due to races with CPUs going idle +or offline, among other things. + +<h2><a name="RCU-sched Expedited Grace Periods"> +RCU-sched Expedited Grace Periods</a></h2> + +<p> +The overall flow of the handling of a given CPU by an RCU-sched +expedited grace period is shown in the following diagram: + +<p><img src="ExpSchedFlow.svg" alt="ExpSchedFlow.svg" width="55%"> + +<p> +As with RCU-preempt's <tt>synchronize_rcu_expedited()</tt>, +<tt>synchronize_sched_expedited()</tt> ignores offline and +idle CPUs, again because they are in remotely detectable +quiescent states. +However, the <tt>synchronize_rcu_expedited()</tt> handler +is <tt>sync_sched_exp_handler()</tt>, and because the +<tt>rcu_read_lock_sched()</tt> and <tt>rcu_read_unlock_sched()</tt> +leave no trace of their invocation, in general it is not possible to tell +whether or not the current CPU is in an RCU read-side critical section. +The best that <tt>sync_sched_exp_handler()</tt> can do is to check +for idle, on the off-chance that the CPU went idle while the IPI +was in flight. +If the CPU is idle, then tt>sync_sched_exp_handler()</tt> reports +the quiescent state. + +<p> +Otherwise, the handler invokes <tt>resched_cpu()</tt>, which forces +a future context switch. +At the time of the context switch, the CPU reports the quiescent state. +Should the CPU go offline first, it will report the quiescent state +at that time. + +<h2><a name="Expedited Grace Period and CPU Hotplug"> +Expedited Grace Period and CPU Hotplug</a></h2> + +<p> +The expedited nature of expedited grace periods require a much tighter +interaction with CPU hotplug operations than is required for normal +grace periods. +In addition, attempting to IPI offline CPUs will result in splats, but +failing to IPI online CPUs can result in too-short grace periods. +Neither option is acceptable in production kernels. + +<p> +The interaction between expedited grace periods and CPU hotplug operations +is carried out at several levels: + +<ol> +<li> The number of CPUs that have ever been online is tracked + by the <tt>rcu_state</tt> structure's <tt>->ncpus</tt> + field. + The <tt>rcu_state</tt> structure's <tt>->ncpus_snap</tt> + field tracks the number of CPUs that have ever been online + at the beginning of an RCU expedited grace period. + Note that this number never decreases, at least in the absence + of a time machine. +<li> The identities of the CPUs that have ever been online is + tracked by the <tt>rcu_node</tt> structure's + <tt>->expmaskinitnext</tt> field. + The <tt>rcu_node</tt> structure's <tt>->expmaskinit</tt> + field tracks the identities of the CPUs that were online + at least once at the beginning of the most recent RCU + expedited grace period. + The <tt>rcu_state</tt> structure's <tt>->ncpus</tt> and + <tt>->ncpus_snap</tt> fields are used to detect when + new CPUs have come online for the first time, that is, + when the <tt>rcu_node</tt> structure's <tt>->expmaskinitnext</tt> + field has changed since the beginning of the last RCU + expedited grace period, which triggers an update of each + <tt>rcu_node</tt> structure's <tt>->expmaskinit</tt> + field from its <tt>->expmaskinitnext</tt> field. +<li> Each <tt>rcu_node</tt> structure's <tt>->expmaskinit</tt> + field is used to initialize that structure's + <tt>->expmask</tt> at the beginning of each RCU + expedited grace period. + This means that only those CPUs that have been online at least + once will be considered for a given grace period. +<li> Any CPU that goes offline will clear its bit in its leaf + <tt>rcu_node</tt> structure's <tt>->qsmaskinitnext</tt> + field, so any CPU with that bit clear can safely be ignored. + However, it is possible for a CPU coming online or going offline + to have this bit set for some time while <tt>cpu_online</tt> + returns <tt>false</tt>. +<li> For each non-idle CPU that RCU believes is currently online, the grace + period invokes <tt>smp_call_function_single()</tt>. + If this succeeds, the CPU was fully online. + Failure indicates that the CPU is in the process of coming online + or going offline, in which case it is necessary to wait for a + short time period and try again. + The purpose of this wait (or series of waits, as the case may be) + is to permit a concurrent CPU-hotplug operation to complete. +<li> In the case of RCU-sched, one of the last acts of an outgoing CPU + is to invoke <tt>rcu_report_dead()</tt>, which + reports a quiescent state for that CPU. + However, this is likely paranoia-induced redundancy. <!-- @@@ --> +</ol> + +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + Why all the dancing around with multiple counters and masks + tracking CPUs that were once online? + Why not just have a single set of masks tracking the currently + online CPUs and be done with it? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + Maintaining single set of masks tracking the online CPUs <i>sounds</i> + easier, at least until you try working out all the race conditions + between grace-period initialization and CPU-hotplug operations. + For example, suppose initialization is progressing down the + tree while a CPU-offline operation is progressing up the tree. + This situation can result in bits set at the top of the tree + that have no counterparts at the bottom of the tree. + Those bits will never be cleared, which will result in + grace-period hangs. + In short, that way lies madness, to say nothing of a great many + bugs, hangs, and deadlocks. + + <p><font color="ffffff"> + In contrast, the current multi-mask multi-counter scheme ensures + that grace-period initialization will always see consistent masks + up and down the tree, which brings significant simplifications + over the single-mask method. + + <p><font color="ffffff"> + This is an instance of + <a href="http://www.cs.columbia.edu/~library/TR-repository/reports/reports-1992/cucs-039-92.ps.gz"><font color="ffffff"> + deferring work in order to avoid synchronization</a>. + Lazily recording CPU-hotplug events at the beginning of the next + grace period greatly simplifies maintenance of the CPU-tracking + bitmasks in the <tt>rcu_node</tt> tree. +</font></td></tr> +<tr><td> </td></tr> +</table> + +<h2><a name="Expedited Grace Period Refinements"> +Expedited Grace Period Refinements</a></h2> + +<ol> +<li> <a href="#Idle-CPU Checks">Idle-CPU checks</a>. +<li> <a href="#Batching via Sequence Counter"> + Batching via sequence counter</a>. +<li> <a href="#Funnel Locking and Wait/Wakeup"> + Funnel locking and wait/wakeup</a>. +<li> <a href="#Use of Workqueues">Use of Workqueues</a>. +<li> <a href="#Stall Warnings">Stall warnings</a>. +</ol> + +<h3><a name="Idle-CPU Checks">Idle-CPU Checks</a></h3> + +<p> +Each expedited grace period checks for idle CPUs when initially forming +the mask of CPUs to be IPIed and again just before IPIing a CPU +(both checks are carried out by <tt>sync_rcu_exp_select_cpus()</tt>). +If the CPU is idle at any time between those two times, the CPU will +not be IPIed. +Instead, the task pushing the grace period forward will include the +idle CPUs in the mask passed to <tt>rcu_report_exp_cpu_mult()</tt>. + +<p> +For RCU-sched, there is an additional check for idle in the IPI +handler, <tt>sync_sched_exp_handler()</tt>. +If the IPI has interrupted the idle loop, then +<tt>sync_sched_exp_handler()</tt> invokes <tt>rcu_report_exp_rdp()</tt> +to report the corresponding quiescent state. + +<p> +For RCU-preempt, there is no specific check for idle in the +IPI handler (<tt>sync_rcu_exp_handler()</tt>), but because +RCU read-side critical sections are not permitted within the +idle loop, if <tt>sync_rcu_exp_handler()</tt> sees that the CPU is within +RCU read-side critical section, the CPU cannot possibly be idle. +Otherwise, <tt>sync_rcu_exp_handler()</tt> invokes +<tt>rcu_report_exp_rdp()</tt> to report the corresponding quiescent +state, regardless of whether or not that quiescent state was due to +the CPU being idle. + +<p> +In summary, RCU expedited grace periods check for idle when building +the bitmask of CPUs that must be IPIed, just before sending each IPI, +and (either explicitly or implicitly) within the IPI handler. + +<h3><a name="Batching via Sequence Counter"> +Batching via Sequence Counter</a></h3> + +<p> +If each grace-period request was carried out separately, expedited +grace periods would have abysmal scalability and +problematic high-load characteristics. +Because each grace-period operation can serve an unlimited number of +updates, it is important to <i>batch</i> requests, so that a single +expedited grace-period operation will cover all requests in the +corresponding batch. + +<p> +This batching is controlled by a sequence counter named +<tt>->expedited_sequence</tt> in the <tt>rcu_state</tt> structure. +This counter has an odd value when there is an expedited grace period +in progress and an even value otherwise, so that dividing the counter +value by two gives the number of completed grace periods. +During any given update request, the counter must transition from +even to odd and then back to even, thus indicating that a grace +period has elapsed. +Therefore, if the initial value of the counter is <tt>s</tt>, +the updater must wait until the counter reaches at least the +value <tt>(s+3)&~0x1</tt>. +This counter is managed by the following access functions: + +<ol> +<li> <tt>rcu_exp_gp_seq_start()</tt>, which marks the start of + an expedited grace period. +<li> <tt>rcu_exp_gp_seq_end()</tt>, which marks the end of an + expedited grace period. +<li> <tt>rcu_exp_gp_seq_snap()</tt>, which obtains a snapshot of + the counter. +<li> <tt>rcu_exp_gp_seq_done()</tt>, which returns <tt>true</tt> + if a full expedited grace period has elapsed since the + corresponding call to <tt>rcu_exp_gp_seq_snap()</tt>. +</ol> + +<p> +Again, only one request in a given batch need actually carry out +a grace-period operation, which means there must be an efficient +way to identify which of many concurrent reqeusts will initiate +the grace period, and that there be an efficient way for the +remaining requests to wait for that grace period to complete. +However, that is the topic of the next section. + +<h3><a name="Funnel Locking and Wait/Wakeup"> +Funnel Locking and Wait/Wakeup</a></h3> + +<p> +The natural way to sort out which of a batch of updaters will initiate +the expedited grace period is to use the <tt>rcu_node</tt> combining +tree, as implemented by the <tt>exp_funnel_lock()</tt> function. +The first updater corresponding to a given grace period arriving +at a given <tt>rcu_node</tt> structure records its desired grace-period +sequence number in the <tt>->exp_seq_rq</tt> field and moves up +to the next level in the tree. +Otherwise, if the <tt>->exp_seq_rq</tt> field already contains +the sequence number for the desired grace period or some later one, +the updater blocks on one of four wait queues in the +<tt>->exp_wq[]</tt> array, using the second-from-bottom +and third-from bottom bits as an index. +An <tt>->exp_lock</tt> field in the <tt>rcu_node</tt> structure +synchronizes access to these fields. + +<p> +An empty <tt>rcu_node</tt> tree is shown in the following diagram, +with the white cells representing the <tt>->exp_seq_rq</tt> field +and the red cells representing the elements of the +<tt>->exp_wq[]</tt> array. + +<p><img src="Funnel0.svg" alt="Funnel0.svg" width="75%"> + +<p> +The next diagram shows the situation after the arrival of Task A +and Task B at the leftmost and rightmost leaf <tt>rcu_node</tt> +structures, respectively. +The current value of the <tt>rcu_state</tt> structure's +<tt>->expedited_sequence</tt> field is zero, so adding three and +clearing the bottom bit results in the value two, which both tasks +record in the <tt>->exp_seq_rq</tt> field of their respective +<tt>rcu_node</tt> structures: + +<p><img src="Funnel1.svg" alt="Funnel1.svg" width="75%"> + +<p> +Each of Tasks A and B will move up to the root +<tt>rcu_node</tt> structure. +Suppose that Task A wins, recording its desired grace-period sequence +number and resulting in the state shown below: + +<p><img src="Funnel2.svg" alt="Funnel2.svg" width="75%"> + +<p> +Task A now advances to initiate a new grace period, while Task B +moves up to the root <tt>rcu_node</tt> structure, and, seeing that +its desired sequence number is already recorded, blocks on +<tt>->exp_wq[1]</tt>. + +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + Why <tt>->exp_wq[1]</tt>? + Given that the value of these tasks' desired sequence number is + two, so shouldn't they instead block on <tt>->exp_wq[2]</tt>? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + No. + + <p><font color="ffffff"> + Recall that the bottom bit of the desired sequence number indicates + whether or not a grace period is currently in progress. + It is therefore necessary to shift the sequence number right one + bit position to obtain the number of the grace period. + This results in <tt>->exp_wq[1]</tt>. +</font></td></tr> +<tr><td> </td></tr> +</table> + +<p> +If Tasks C and D also arrive at this point, they will compute the +same desired grace-period sequence number, and see that both leaf +<tt>rcu_node</tt> structures already have that value recorded. +They will therefore block on their respective <tt>rcu_node</tt> +structures' <tt>->exp_wq[1]</tt> fields, as shown below: + +<p><img src="Funnel3.svg" alt="Funnel3.svg" width="75%"> + +<p> +Task A now acquires the <tt>rcu_state</tt> structure's +<tt>->exp_mutex</tt> and initiates the grace period, which +increments <tt>->expedited_sequence</tt>. +Therefore, if Tasks E and F arrive, they will compute +a desired sequence number of 4 and will record this value as +shown below: + +<p><img src="Funnel4.svg" alt="Funnel4.svg" width="75%"> + +<p> +Tasks E and F will propagate up the <tt>rcu_node</tt> +combining tree, with Task F blocking on the root <tt>rcu_node</tt> +structure and Task E wait for Task A to finish so that +it can start the next grace period. +The resulting state is as shown below: + +<p><img src="Funnel5.svg" alt="Funnel5.svg" width="75%"> + +<p> +Once the grace period completes, Task A +starts waking up the tasks waiting for this grace period to complete, +increments the <tt>->expedited_sequence</tt>, +acquires the <tt>->exp_wake_mutex</tt> and then releases the +<tt>->exp_mutex</tt>. +This results in the following state: + +<p><img src="Funnel6.svg" alt="Funnel6.svg" width="75%"> + +<p> +Task E can then acquire <tt>->exp_mutex</tt> and increment +<tt>->expedited_sequence</tt> to the value three. +If new tasks G and H arrive and moves up the combining tree at the +same time, the state will be as follows: + +<p><img src="Funnel7.svg" alt="Funnel7.svg" width="75%"> + +<p> +Note that three of the root <tt>rcu_node</tt> structure's +waitqueues are now occupied. +However, at some point, Task A will wake up the +tasks blocked on the <tt>->exp_wq</tt> waitqueues, resulting +in the following state: + +<p><img src="Funnel8.svg" alt="Funnel8.svg" width="75%"> + +<p> +Execution will continue with Tasks E and H completing +their grace periods and carrying out their wakeups. + +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + What happens if Task A takes so long to do its wakeups + that Task E's grace period completes? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + Then Task E will block on the <tt>->exp_wake_mutex</tt>, + which will also prevent it from releasing <tt>->exp_mutex</tt>, + which in turn will prevent the next grace period from starting. + This last is important in preventing overflow of the + <tt>->exp_wq[]</tt> array. +</font></td></tr> +<tr><td> </td></tr> +</table> + +<h3><a name="Use of Workqueues">Use of Workqueues</a></h3> + +<p> +In earlier implementations, the task requesting the expedited +grace period also drove it to completion. +This straightforward approach had the disadvantage of needing to +account for signals sent to user tasks, +so more recent implemementations use the Linux kernel's +<a href="https://www.kernel.org/doc/Documentation/workqueue.txt">workqueues</a>. + +<p> +The requesting task still does counter snapshotting and funnel-lock +processing, but the task reaching the top of the funnel lock +does a <tt>schedule_work()</tt> (from <tt>_synchronize_rcu_expedited()</tt> +so that a workqueue kthread does the actual grace-period processing. +Because workqueue kthreads do not accept signals, grace-period-wait +processing need not allow for signals. + +In addition, this approach allows wakeups for the previous expedited +grace period to be overlapped with processing for the next expedited +grace period. +Because there are only four sets of waitqueues, it is necessary to +ensure that the previous grace period's wakeups complete before the +next grace period's wakeups start. +This is handled by having the <tt>->exp_mutex</tt> +guard expedited grace-period processing and the +<tt>->exp_wake_mutex</tt> guard wakeups. +The key point is that the <tt>->exp_mutex</tt> is not released +until the first wakeup is complete, which means that the +<tt>->exp_wake_mutex</tt> has already been acquired at that point. +This approach ensures that the previous grace period's wakeups can +be carried out while the current grace period is in process, but +that these wakeups will complete before the next grace period starts. +This means that only three waitqueues are required, guaranteeing that +the four that are provided are sufficient. + +<h3><a name="Stall Warnings">Stall Warnings</a></h3> + +<p> +Expediting grace periods does nothing to speed things up when RCU +readers take too long, and therefore expedited grace periods check +for stalls just as normal grace periods do. + +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + But why not just let the normal grace-period machinery + detect the stalls, given that a given reader must block + both normal and expedited grace periods? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + Because it is quite possible that at a given time there + is no normal grace period in progress, in which case the + normal grace period cannot emit a stall warning. +</font></td></tr> +<tr><td> </td></tr> +</table> + +The <tt>synchronize_sched_expedited_wait()</tt> function loops waiting +for the expedited grace period to end, but with a timeout set to the +current RCU CPU stall-warning time. +If this time is exceeded, any CPUs or <tt>rcu_node</tt> structures +blocking the current grace period are printed. +Each stall warning results in another pass through the loop, but the +second and subsequent passes use longer stall times. + +<h3><a name="Summary"> +Summary</a></h3> + +<p> +Expedited grace periods use a sequence-number approach to promote +batching, so that a single grace-period operation can serve numerous +requests. +A funnel lock is used to efficiently identify the one task out of +a concurrent group that will request the grace period. +All members of the group will block on waitqueues provided in +the <tt>rcu_node</tt> structure. +The actual grace-period processing is carried out by a workqueue. + +<p> +CPU-hotplug operations are noted lazily in order to prevent the need +for tight synchronization between expedited grace periods and +CPU-hotplug operations. +The dyntick-idle counters are used to avoid sending IPIs to idle CPUs, +at least in the common case. +RCU-preempt and RCU-sched use different IPI handlers and different +code to respond to the state changes carried out by those handlers, +but otherwise use common code. + +<p> +Quiescent states are tracked using the <tt>rcu_node</tt> tree, +and once all necessary quiescent states have been reported, +all tasks waiting on this expedited grace period are awakened. +A pair of mutexes are used to allow one grace period's wakeups +to proceed concurrently with the next grace period's processing. + +<p> +This combination of mechanisms allows expedited grace periods to +run reasonably efficiently. +However, for non-time-critical tasks, normal grace periods should be +used instead because their longer duration permits much higher +degrees of batching, and thus much lower per-request overheads. + +</body></html> diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel0.svg b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel0.svg new file mode 100644 index 000000000000..98af66557908 --- /dev/null +++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel0.svg @@ -0,0 +1,275 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Created with Inkscape (http://www.inkscape.org/) --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="490.05093" + height="125.78741" + id="svg2" + version="1.1" + inkscape:version="0.48.4 r9939" + sodipodi:docname="Funnel0.svg"> + <defs + id="defs4"> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend" + style="overflow:visible"> + <path + id="path3792" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lstart" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lstart" + style="overflow:visible"> + <path + id="path3789" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(1.1,0,0,1.1,1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lstart" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lstart-4" + style="overflow:visible"> + <path + id="path3789-9" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(1.1,0,0,1.1,1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-4" + style="overflow:visible"> + <path + id="path3792-4" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + </defs> + <sodipodi:namedview + id="base" + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1.0" + inkscape:pageopacity="0.0" + inkscape:pageshadow="2" + inkscape:zoom="1.3670394" + inkscape:cx="201.06495" + inkscape:cy="-86.548414" + inkscape:document-units="px" + inkscape:current-layer="layer1" + showgrid="false" + inkscape:window-width="1351" + inkscape:window-height="836" + inkscape:window-x="171" + inkscape:window-y="279" + inkscape:window-maximized="0" + fit-margin-top="5" + fit-margin-left="5" + fit-margin-right="5" + fit-margin-bottom="5" /> + <metadata + id="metadata7"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title /> + </cc:Work> + </rdf:RDF> + </metadata> + <g + inkscape:label="Layer 1" + inkscape:groupmode="layer" + id="layer1" + transform="translate(-117.08462,-249.92053)"> + <flowRoot + xml:space="preserve" + id="flowRoot2985" + style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"><flowRegion + id="flowRegion2987"><rect + id="rect2989" + width="82.85714" + height="11.428572" + x="240" + y="492.36218" /></flowRegion><flowPara + id="flowPara2991" /></flowRoot> <text + xml:space="preserve" + style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol" + x="362.371" + y="262.51819" + id="text4441" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4443" + x="362.371" + y="262.51819">->expedited_sequence: 0</tspan></text> + <rect + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" + id="rect3101" + width="43.158947" + height="26.33428" + x="253.55223" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3" + width="43.158947" + height="26.33428" + x="297.04141" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3-6" + width="43.158947" + height="26.33428" + x="427.509" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3-6-7" + width="43.158947" + height="26.33428" + x="384.01981" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3-6-7-5" + width="43.158947" + height="26.33428" + x="340.53061" + y="275.07489" /> + <g + id="g3997" + transform="translate(-0.87295532,0)"> + <rect + y="343.37366" + x="123.95757" + height="26.33428" + width="43.158947" + id="rect3101-35" + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="167.44673" + height="26.33428" + width="43.158947" + id="rect3101-3-62" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="297.91437" + height="26.33428" + width="43.158947" + id="rect3101-3-6-9" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="254.42516" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-1" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="210.93593" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-5-2" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="145.45404" + y="360.25174" + id="text3013" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015" + x="145.45404" + y="360.25174" + style="font-size:10px">:0</tspan></text> + </g> + <g + id="g3997-7" + transform="translate(260.06223,0)"> + <rect + y="343.37366" + x="123.95757" + height="26.33428" + width="43.158947" + id="rect3101-35-0" + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="167.44673" + height="26.33428" + width="43.158947" + id="rect3101-3-62-9" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="297.91437" + height="26.33428" + width="43.158947" + id="rect3101-3-6-9-3" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="254.42516" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-1-6" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="210.93593" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-5-2-0" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="145.45404" + y="360.25174" + id="text3013-3" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6" + x="145.45404" + y="360.25174" + style="font-size:10px">:0</tspan></text> + </g> + </g> +</svg> diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel1.svg b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel1.svg new file mode 100644 index 000000000000..e0184a37aec7 --- /dev/null +++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel1.svg @@ -0,0 +1,275 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Created with Inkscape (http://www.inkscape.org/) --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="490.05093" + height="125.78741" + id="svg2" + version="1.1" + inkscape:version="0.48.4 r9939" + sodipodi:docname="Funnel1.svg"> + <defs + id="defs4"> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend" + style="overflow:visible"> + <path + id="path3792" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lstart" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lstart" + style="overflow:visible"> + <path + id="path3789" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(1.1,0,0,1.1,1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lstart" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lstart-4" + style="overflow:visible"> + <path + id="path3789-9" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(1.1,0,0,1.1,1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-4" + style="overflow:visible"> + <path + id="path3792-4" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + </defs> + <sodipodi:namedview + id="base" + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1.0" + inkscape:pageopacity="0.0" + inkscape:pageshadow="2" + inkscape:zoom="1.3670394" + inkscape:cx="201.06495" + inkscape:cy="-86.548414" + inkscape:document-units="px" + inkscape:current-layer="g3997-7" + showgrid="false" + inkscape:window-width="1351" + inkscape:window-height="836" + inkscape:window-x="363" + inkscape:window-y="336" + inkscape:window-maximized="0" + fit-margin-top="5" + fit-margin-left="5" + fit-margin-right="5" + fit-margin-bottom="5" /> + <metadata + id="metadata7"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title /> + </cc:Work> + </rdf:RDF> + </metadata> + <g + inkscape:label="Layer 1" + inkscape:groupmode="layer" + id="layer1" + transform="translate(-117.08462,-249.92053)"> + <flowRoot + xml:space="preserve" + id="flowRoot2985" + style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"><flowRegion + id="flowRegion2987"><rect + id="rect2989" + width="82.85714" + height="11.428572" + x="240" + y="492.36218" /></flowRegion><flowPara + id="flowPara2991" /></flowRoot> <text + xml:space="preserve" + style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol" + x="362.371" + y="262.51819" + id="text4441" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4443" + x="362.371" + y="262.51819">->expedited_sequence: 0</tspan></text> + <rect + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" + id="rect3101" + width="43.158947" + height="26.33428" + x="253.55223" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3" + width="43.158947" + height="26.33428" + x="297.04141" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3-6" + width="43.158947" + height="26.33428" + x="427.509" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3-6-7" + width="43.158947" + height="26.33428" + x="384.01981" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3-6-7-5" + width="43.158947" + height="26.33428" + x="340.53061" + y="275.07489" /> + <g + id="g3997" + transform="translate(-0.87295532,0)"> + <rect + y="343.37366" + x="123.95757" + height="26.33428" + width="43.158947" + id="rect3101-35" + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="167.44673" + height="26.33428" + width="43.158947" + id="rect3101-3-62" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="297.91437" + height="26.33428" + width="43.158947" + id="rect3101-3-6-9" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="254.42516" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-1" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="210.93593" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-5-2" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="146.00092" + y="360.25174" + id="text3013" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015" + x="146.00092" + y="360.25174" + style="font-size:10px">A:2</tspan></text> + </g> + <g + id="g3997-7" + transform="translate(260.06223,0)"> + <rect + y="343.37366" + x="123.95757" + height="26.33428" + width="43.158947" + id="rect3101-35-0" + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="167.44673" + height="26.33428" + width="43.158947" + id="rect3101-3-62-9" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="297.91437" + height="26.33428" + width="43.158947" + id="rect3101-3-6-9-3" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="254.42516" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-1-6" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="210.93593" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-5-2-0" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="145.54926" + y="360.25174" + id="text3013-3" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6" + x="145.54926" + y="360.25174" + style="font-size:10px">B:2</tspan></text> + </g> + </g> +</svg> diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel2.svg b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel2.svg new file mode 100644 index 000000000000..1bc3fed54d58 --- /dev/null +++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel2.svg @@ -0,0 +1,287 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Created with Inkscape (http://www.inkscape.org/) --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="490.05093" + height="125.78741" + id="svg2" + version="1.1" + inkscape:version="0.48.4 r9939" + sodipodi:docname="Funnel2.svg"> + <defs + id="defs4"> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend" + style="overflow:visible"> + <path + id="path3792" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lstart" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lstart" + style="overflow:visible"> + <path + id="path3789" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(1.1,0,0,1.1,1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lstart" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lstart-4" + style="overflow:visible"> + <path + id="path3789-9" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(1.1,0,0,1.1,1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-4" + style="overflow:visible"> + <path + id="path3792-4" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + </defs> + <sodipodi:namedview + id="base" + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1.0" + inkscape:pageopacity="0.0" + inkscape:pageshadow="2" + inkscape:zoom="1.3670394" + inkscape:cx="114.01552" + inkscape:cy="-86.548414" + inkscape:document-units="px" + inkscape:current-layer="g3997-7" + showgrid="false" + inkscape:window-width="1351" + inkscape:window-height="836" + inkscape:window-x="363" + inkscape:window-y="336" + inkscape:window-maximized="0" + fit-margin-top="5" + fit-margin-left="5" + fit-margin-right="5" + fit-margin-bottom="5" /> + <metadata + id="metadata7"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title /> + </cc:Work> + </rdf:RDF> + </metadata> + <g + inkscape:label="Layer 1" + inkscape:groupmode="layer" + id="layer1" + transform="translate(-117.08462,-249.92053)"> + <flowRoot + xml:space="preserve" + id="flowRoot2985" + style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"><flowRegion + id="flowRegion2987"><rect + id="rect2989" + width="82.85714" + height="11.428572" + x="240" + y="492.36218" /></flowRegion><flowPara + id="flowPara2991" /></flowRoot> <text + xml:space="preserve" + style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol" + x="362.371" + y="262.51819" + id="text4441" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4443" + x="362.371" + y="262.51819">->expedited_sequence: 0</tspan></text> + <rect + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" + id="rect3101" + width="43.158947" + height="26.33428" + x="253.55223" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3" + width="43.158947" + height="26.33428" + x="297.04141" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3-6" + width="43.158947" + height="26.33428" + x="427.509" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3-6-7" + width="43.158947" + height="26.33428" + x="384.01981" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3-6-7-5" + width="43.158947" + height="26.33428" + x="340.53061" + y="275.07489" /> + <g + id="g3997" + transform="translate(-0.87295532,0)"> + <rect + y="343.37366" + x="123.95757" + height="26.33428" + width="43.158947" + id="rect3101-35" + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="167.44673" + height="26.33428" + width="43.158947" + id="rect3101-3-62" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="297.91437" + height="26.33428" + width="43.158947" + id="rect3101-3-6-9" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="254.42516" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-1" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="210.93593" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-5-2" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="146.00092" + y="360.25174" + id="text3013" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015" + x="146.00092" + y="360.25174" + style="font-size:10px">:2</tspan></text> + </g> + <g + id="g3997-7" + transform="translate(260.06223,0)"> + <rect + y="343.37366" + x="123.95757" + height="26.33428" + width="43.158947" + id="rect3101-35-0" + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="167.44673" + height="26.33428" + width="43.158947" + id="rect3101-3-62-9" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="297.91437" + height="26.33428" + width="43.158947" + id="rect3101-3-6-9-3" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="254.42516" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-1-6" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="210.93593" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-5-2-0" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="145.54926" + y="360.25174" + id="text3013-3" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6" + x="145.54926" + y="360.25174" + style="font-size:10px">B:2</tspan></text> + </g> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="275.59558" + y="291.95297" + id="text3013-36" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-7" + x="275.59558" + y="291.95297" + style="font-size:10px">A:2</tspan></text> + </g> +</svg> diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel3.svg b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel3.svg new file mode 100644 index 000000000000..6d8a1bffb3e4 --- /dev/null +++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel3.svg @@ -0,0 +1,323 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Created with Inkscape (http://www.inkscape.org/) --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="490.05093" + height="125.78741" + id="svg2" + version="1.1" + inkscape:version="0.48.4 r9939" + sodipodi:docname="Funnel3.svg"> + <defs + id="defs4"> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend" + style="overflow:visible"> + <path + id="path3792" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lstart" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lstart" + style="overflow:visible"> + <path + id="path3789" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(1.1,0,0,1.1,1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lstart" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lstart-4" + style="overflow:visible"> + <path + id="path3789-9" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(1.1,0,0,1.1,1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-4" + style="overflow:visible"> + <path + id="path3792-4" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + </defs> + <sodipodi:namedview + id="base" + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1.0" + inkscape:pageopacity="0.0" + inkscape:pageshadow="2" + inkscape:zoom="1.3670394" + inkscape:cx="114.01552" + inkscape:cy="-86.548414" + inkscape:document-units="px" + inkscape:current-layer="layer1" + showgrid="false" + inkscape:window-width="1351" + inkscape:window-height="836" + inkscape:window-x="68" + inkscape:window-y="180" + inkscape:window-maximized="0" + fit-margin-top="5" + fit-margin-left="5" + fit-margin-right="5" + fit-margin-bottom="5" /> + <metadata + id="metadata7"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title /> + </cc:Work> + </rdf:RDF> + </metadata> + <g + inkscape:label="Layer 1" + inkscape:groupmode="layer" + id="layer1" + transform="translate(-117.08462,-249.92053)"> + <flowRoot + xml:space="preserve" + id="flowRoot2985" + style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"><flowRegion + id="flowRegion2987"><rect + id="rect2989" + width="82.85714" + height="11.428572" + x="240" + y="492.36218" /></flowRegion><flowPara + id="flowPara2991" /></flowRoot> <text + xml:space="preserve" + style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol" + x="362.371" + y="262.51819" + id="text4441" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4443" + x="362.371" + y="262.51819">->expedited_sequence: 0 GP: A</tspan></text> + <rect + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" + id="rect3101" + width="43.158947" + height="26.33428" + x="253.55223" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3" + width="43.158947" + height="26.33428" + x="297.04141" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3-6" + width="43.158947" + height="26.33428" + x="427.509" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3-6-7" + width="43.158947" + height="26.33428" + x="384.01981" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3-6-7-5" + width="43.158947" + height="26.33428" + x="340.53061" + y="275.07489" /> + <g + id="g3997" + transform="translate(-0.87295532,0)"> + <rect + y="343.37366" + x="123.95757" + height="26.33428" + width="43.158947" + id="rect3101-35" + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="167.44673" + height="26.33428" + width="43.158947" + id="rect3101-3-62" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="297.91437" + height="26.33428" + width="43.158947" + id="rect3101-3-6-9" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="254.42516" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-1" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="210.93593" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-5-2" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="146.00092" + y="360.25174" + id="text3013" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015" + x="146.00092" + y="360.25174" + style="font-size:10px">:2</tspan></text> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="232.51051" + y="360.18094" + id="text3013-3-3" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6-6" + x="232.51051" + y="360.18094" + style="font-size:10px">C</tspan></text> + </g> + <g + id="g3019" + transform="translate(260.06223,0)"> + <rect + y="343.37366" + x="123.95757" + height="26.33428" + width="43.158947" + id="rect3101-35-0" + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="167.44673" + height="26.33428" + width="43.158947" + id="rect3101-3-62-9" + style="fill:#ff8282;fill-opacity:1;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="297.91437" + height="26.33428" + width="43.158947" + id="rect3101-3-6-9-3" + style="fill:#ff8282;fill-opacity:1;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="254.42516" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-1-6" + style="fill:#ff8282;fill-opacity:1;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="210.93593" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-5-2-0" + style="fill:#ff8282;fill-opacity:1;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="145.54926" + y="360.25174" + id="text3013-3" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6" + x="145.54926" + y="360.25174" + style="font-size:10px">:2</tspan></text> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="232.31764" + y="360.18582" + id="text3013-3-3-7" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6-6-5" + x="232.31764" + y="360.18582" + style="font-size:10px">D</tspan></text> + </g> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="275.59558" + y="291.95297" + id="text3013-36" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-7" + x="275.59558" + y="291.95297" + style="font-size:10px">:2</tspan></text> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="361.97092" + y="291.88705" + id="text3013-3-36" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6-7" + x="361.97092" + y="291.88705" + style="font-size:10px">B</tspan></text> + </g> +</svg> diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel4.svg b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel4.svg new file mode 100644 index 000000000000..44018fd6342b --- /dev/null +++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel4.svg @@ -0,0 +1,323 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Created with Inkscape (http://www.inkscape.org/) --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="490.05093" + height="125.78741" + id="svg2" + version="1.1" + inkscape:version="0.48.4 r9939" + sodipodi:docname="Funnel4.svg"> + <defs + id="defs4"> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend" + style="overflow:visible"> + <path + id="path3792" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lstart" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lstart" + style="overflow:visible"> + <path + id="path3789" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(1.1,0,0,1.1,1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lstart" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lstart-4" + style="overflow:visible"> + <path + id="path3789-9" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(1.1,0,0,1.1,1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-4" + style="overflow:visible"> + <path + id="path3792-4" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + </defs> + <sodipodi:namedview + id="base" + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1.0" + inkscape:pageopacity="0.0" + inkscape:pageshadow="2" + inkscape:zoom="1.3670394" + inkscape:cx="114.01552" + inkscape:cy="-86.548414" + inkscape:document-units="px" + inkscape:current-layer="layer1" + showgrid="false" + inkscape:window-width="1351" + inkscape:window-height="836" + inkscape:window-x="68" + inkscape:window-y="180" + inkscape:window-maximized="0" + fit-margin-top="5" + fit-margin-left="5" + fit-margin-right="5" + fit-margin-bottom="5" /> + <metadata + id="metadata7"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title /> + </cc:Work> + </rdf:RDF> + </metadata> + <g + inkscape:label="Layer 1" + inkscape:groupmode="layer" + id="layer1" + transform="translate(-117.08462,-249.92053)"> + <flowRoot + xml:space="preserve" + id="flowRoot2985" + style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"><flowRegion + id="flowRegion2987"><rect + id="rect2989" + width="82.85714" + height="11.428572" + x="240" + y="492.36218" /></flowRegion><flowPara + id="flowPara2991" /></flowRoot> <text + xml:space="preserve" + style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol" + x="362.371" + y="262.51819" + id="text4441" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4443" + x="362.371" + y="262.51819">->expedited_sequence: 1 GP: A</tspan></text> + <rect + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" + id="rect3101" + width="43.158947" + height="26.33428" + x="253.55223" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3" + width="43.158947" + height="26.33428" + x="297.04141" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3-6" + width="43.158947" + height="26.33428" + x="427.509" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3-6-7" + width="43.158947" + height="26.33428" + x="384.01981" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3-6-7-5" + width="43.158947" + height="26.33428" + x="340.53061" + y="275.07489" /> + <g + id="g3997" + transform="translate(-0.87295532,0)"> + <rect + y="343.37366" + x="123.95757" + height="26.33428" + width="43.158947" + id="rect3101-35" + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="167.44673" + height="26.33428" + width="43.158947" + id="rect3101-3-62" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="297.91437" + height="26.33428" + width="43.158947" + id="rect3101-3-6-9" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="254.42516" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-1" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="210.93593" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-5-2" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="146.00092" + y="360.25174" + id="text3013" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015" + x="146.00092" + y="360.25174" + style="font-size:10px">E:4</tspan></text> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="232.51051" + y="360.18094" + id="text3013-3-3" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6-6" + x="232.51051" + y="360.18094" + style="font-size:10px">C</tspan></text> + </g> + <g + id="g3019" + transform="translate(260.06223,0)"> + <rect + y="343.37366" + x="123.95757" + height="26.33428" + width="43.158947" + id="rect3101-35-0" + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="167.44673" + height="26.33428" + width="43.158947" + id="rect3101-3-62-9" + style="fill:#ff8282;fill-opacity:1;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="297.91437" + height="26.33428" + width="43.158947" + id="rect3101-3-6-9-3" + style="fill:#ff8282;fill-opacity:1;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="254.42516" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-1-6" + style="fill:#ff8282;fill-opacity:1;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="210.93593" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-5-2-0" + style="fill:#ff8282;fill-opacity:1;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="145.54926" + y="360.25174" + id="text3013-3" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6" + x="145.54926" + y="360.25174" + style="font-size:10px">F:4</tspan></text> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="232.31764" + y="360.18582" + id="text3013-3-3-7" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6-6-5" + x="232.31764" + y="360.18582" + style="font-size:10px">D</tspan></text> + </g> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="275.59558" + y="291.95297" + id="text3013-36" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-7" + x="275.59558" + y="291.95297" + style="font-size:10px">:2</tspan></text> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="361.97092" + y="291.88705" + id="text3013-3-36" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6-7" + x="361.97092" + y="291.88705" + style="font-size:10px">B</tspan></text> + </g> +</svg> diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel5.svg b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel5.svg new file mode 100644 index 000000000000..e5eef50454fb --- /dev/null +++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel5.svg @@ -0,0 +1,335 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Created with Inkscape (http://www.inkscape.org/) --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="490.05093" + height="125.78741" + id="svg2" + version="1.1" + inkscape:version="0.48.4 r9939" + sodipodi:docname="Funnel5.svg"> + <defs + id="defs4"> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend" + style="overflow:visible"> + <path + id="path3792" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lstart" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lstart" + style="overflow:visible"> + <path + id="path3789" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(1.1,0,0,1.1,1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lstart" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lstart-4" + style="overflow:visible"> + <path + id="path3789-9" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(1.1,0,0,1.1,1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-4" + style="overflow:visible"> + <path + id="path3792-4" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + </defs> + <sodipodi:namedview + id="base" + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1.0" + inkscape:pageopacity="0.0" + inkscape:pageshadow="2" + inkscape:zoom="1.3670394" + inkscape:cx="114.01552" + inkscape:cy="-86.548414" + inkscape:document-units="px" + inkscape:current-layer="layer1" + showgrid="false" + inkscape:window-width="1351" + inkscape:window-height="836" + inkscape:window-x="68" + inkscape:window-y="180" + inkscape:window-maximized="0" + fit-margin-top="5" + fit-margin-left="5" + fit-margin-right="5" + fit-margin-bottom="5" /> + <metadata + id="metadata7"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title /> + </cc:Work> + </rdf:RDF> + </metadata> + <g + inkscape:label="Layer 1" + inkscape:groupmode="layer" + id="layer1" + transform="translate(-117.08462,-249.92053)"> + <flowRoot + xml:space="preserve" + id="flowRoot2985" + style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"><flowRegion + id="flowRegion2987"><rect + id="rect2989" + width="82.85714" + height="11.428572" + x="240" + y="492.36218" /></flowRegion><flowPara + id="flowPara2991" /></flowRoot> <text + xml:space="preserve" + style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol" + x="362.371" + y="262.51819" + id="text4441" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4443" + x="362.371" + y="262.51819">->expedited_sequence: 1 GP: A,E</tspan></text> + <rect + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" + id="rect3101" + width="43.158947" + height="26.33428" + x="253.55223" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3" + width="43.158947" + height="26.33428" + x="297.04141" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3-6" + width="43.158947" + height="26.33428" + x="427.509" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3-6-7" + width="43.158947" + height="26.33428" + x="384.01981" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3-6-7-5" + width="43.158947" + height="26.33428" + x="340.53061" + y="275.07489" /> + <g + id="g3997" + transform="translate(-0.87295532,0)"> + <rect + y="343.37366" + x="123.95757" + height="26.33428" + width="43.158947" + id="rect3101-35" + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="167.44673" + height="26.33428" + width="43.158947" + id="rect3101-3-62" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="297.91437" + height="26.33428" + width="43.158947" + id="rect3101-3-6-9" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="254.42516" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-1" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="210.93593" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-5-2" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="146.00092" + y="360.25174" + id="text3013" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015" + x="146.00092" + y="360.25174" + style="font-size:10px">:4</tspan></text> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="232.51051" + y="360.18094" + id="text3013-3-3" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6-6" + x="232.51051" + y="360.18094" + style="font-size:10px">C</tspan></text> + </g> + <g + id="g3019" + transform="translate(260.06223,0)"> + <rect + y="343.37366" + x="123.95757" + height="26.33428" + width="43.158947" + id="rect3101-35-0" + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="167.44673" + height="26.33428" + width="43.158947" + id="rect3101-3-62-9" + style="fill:#ff8282;fill-opacity:1;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="297.91437" + height="26.33428" + width="43.158947" + id="rect3101-3-6-9-3" + style="fill:#ff8282;fill-opacity:1;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="254.42516" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-1-6" + style="fill:#ff8282;fill-opacity:1;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="210.93593" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-5-2-0" + style="fill:#ff8282;fill-opacity:1;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="145.54926" + y="360.25174" + id="text3013-3" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6" + x="145.54926" + y="360.25174" + style="font-size:10px">:4</tspan></text> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="232.31764" + y="360.18582" + id="text3013-3-3-7" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6-6-5" + x="232.31764" + y="360.18582" + style="font-size:10px">D</tspan></text> + </g> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="275.59558" + y="291.95297" + id="text3013-36" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-7" + x="275.59558" + y="291.95297" + style="font-size:10px">:4</tspan></text> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="361.97092" + y="291.88705" + id="text3013-3-36" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6-7" + x="361.97092" + y="291.88705" + style="font-size:10px">B</tspan></text> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="405.40396" + y="291.88705" + id="text3013-3-36-3" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6-7-6" + x="405.40396" + y="291.88705" + style="font-size:10px">F</tspan></text> + </g> +</svg> diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel6.svg b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel6.svg new file mode 100644 index 000000000000..fbd2c1892886 --- /dev/null +++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel6.svg @@ -0,0 +1,335 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Created with Inkscape (http://www.inkscape.org/) --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="490.05093" + height="125.78741" + id="svg2" + version="1.1" + inkscape:version="0.48.4 r9939" + sodipodi:docname="Funnel6.svg"> + <defs + id="defs4"> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend" + style="overflow:visible"> + <path + id="path3792" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lstart" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lstart" + style="overflow:visible"> + <path + id="path3789" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(1.1,0,0,1.1,1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lstart" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lstart-4" + style="overflow:visible"> + <path + id="path3789-9" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(1.1,0,0,1.1,1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-4" + style="overflow:visible"> + <path + id="path3792-4" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + </defs> + <sodipodi:namedview + id="base" + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1.0" + inkscape:pageopacity="0.0" + inkscape:pageshadow="2" + inkscape:zoom="1.3670394" + inkscape:cx="114.01552" + inkscape:cy="-86.548414" + inkscape:document-units="px" + inkscape:current-layer="layer1" + showgrid="false" + inkscape:window-width="1351" + inkscape:window-height="836" + inkscape:window-x="68" + inkscape:window-y="180" + inkscape:window-maximized="0" + fit-margin-top="5" + fit-margin-left="5" + fit-margin-right="5" + fit-margin-bottom="5" /> + <metadata + id="metadata7"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title /> + </cc:Work> + </rdf:RDF> + </metadata> + <g + inkscape:label="Layer 1" + inkscape:groupmode="layer" + id="layer1" + transform="translate(-117.08462,-249.92053)"> + <flowRoot + xml:space="preserve" + id="flowRoot2985" + style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"><flowRegion + id="flowRegion2987"><rect + id="rect2989" + width="82.85714" + height="11.428572" + x="240" + y="492.36218" /></flowRegion><flowPara + id="flowPara2991" /></flowRoot> <text + xml:space="preserve" + style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol" + x="362.371" + y="262.51819" + id="text4441" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4443" + x="362.371" + y="262.51819">->expedited_sequence: 2 GP: E Wakeup: A</tspan></text> + <rect + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" + id="rect3101" + width="43.158947" + height="26.33428" + x="253.55223" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3" + width="43.158947" + height="26.33428" + x="297.04141" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3-6" + width="43.158947" + height="26.33428" + x="427.509" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3-6-7" + width="43.158947" + height="26.33428" + x="384.01981" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3-6-7-5" + width="43.158947" + height="26.33428" + x="340.53061" + y="275.07489" /> + <g + id="g3997" + transform="translate(-0.87295532,0)"> + <rect + y="343.37366" + x="123.95757" + height="26.33428" + width="43.158947" + id="rect3101-35" + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="167.44673" + height="26.33428" + width="43.158947" + id="rect3101-3-62" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="297.91437" + height="26.33428" + width="43.158947" + id="rect3101-3-6-9" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="254.42516" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-1" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="210.93593" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-5-2" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="146.00092" + y="360.25174" + id="text3013" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015" + x="146.00092" + y="360.25174" + style="font-size:10px">:4</tspan></text> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="232.51051" + y="360.18094" + id="text3013-3-3" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6-6" + x="232.51051" + y="360.18094" + style="font-size:10px">C</tspan></text> + </g> + <g + id="g3019" + transform="translate(260.06223,0)"> + <rect + y="343.37366" + x="123.95757" + height="26.33428" + width="43.158947" + id="rect3101-35-0" + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="167.44673" + height="26.33428" + width="43.158947" + id="rect3101-3-62-9" + style="fill:#ff8282;fill-opacity:1;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="297.91437" + height="26.33428" + width="43.158947" + id="rect3101-3-6-9-3" + style="fill:#ff8282;fill-opacity:1;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="254.42516" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-1-6" + style="fill:#ff8282;fill-opacity:1;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="210.93593" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-5-2-0" + style="fill:#ff8282;fill-opacity:1;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="145.54926" + y="360.25174" + id="text3013-3" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6" + x="145.54926" + y="360.25174" + style="font-size:10px">:4</tspan></text> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="232.31764" + y="360.18582" + id="text3013-3-3-7" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6-6-5" + x="232.31764" + y="360.18582" + style="font-size:10px">D</tspan></text> + </g> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="275.59558" + y="291.95297" + id="text3013-36" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-7" + x="275.59558" + y="291.95297" + style="font-size:10px">:4</tspan></text> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="361.97092" + y="291.88705" + id="text3013-3-36" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6-7" + x="361.97092" + y="291.88705" + style="font-size:10px">B</tspan></text> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="405.40396" + y="291.88705" + id="text3013-3-36-3" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6-7-6" + x="405.40396" + y="291.88705" + style="font-size:10px">F</tspan></text> + </g> +</svg> diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel7.svg b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel7.svg new file mode 100644 index 000000000000..502e159ed278 --- /dev/null +++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel7.svg @@ -0,0 +1,347 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Created with Inkscape (http://www.inkscape.org/) --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="490.05093" + height="125.78741" + id="svg2" + version="1.1" + inkscape:version="0.48.4 r9939" + sodipodi:docname="Funnel7.svg"> + <defs + id="defs4"> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend" + style="overflow:visible"> + <path + id="path3792" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lstart" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lstart" + style="overflow:visible"> + <path + id="path3789" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(1.1,0,0,1.1,1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lstart" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lstart-4" + style="overflow:visible"> + <path + id="path3789-9" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(1.1,0,0,1.1,1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-4" + style="overflow:visible"> + <path + id="path3792-4" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + </defs> + <sodipodi:namedview + id="base" + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1.0" + inkscape:pageopacity="0.0" + inkscape:pageshadow="2" + inkscape:zoom="1.3670394" + inkscape:cx="114.01552" + inkscape:cy="-86.548414" + inkscape:document-units="px" + inkscape:current-layer="layer1" + showgrid="false" + inkscape:window-width="1351" + inkscape:window-height="836" + inkscape:window-x="68" + inkscape:window-y="180" + inkscape:window-maximized="0" + fit-margin-top="5" + fit-margin-left="5" + fit-margin-right="5" + fit-margin-bottom="5" /> + <metadata + id="metadata7"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title /> + </cc:Work> + </rdf:RDF> + </metadata> + <g + inkscape:label="Layer 1" + inkscape:groupmode="layer" + id="layer1" + transform="translate(-117.08462,-249.92053)"> + <flowRoot + xml:space="preserve" + id="flowRoot2985" + style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"><flowRegion + id="flowRegion2987"><rect + id="rect2989" + width="82.85714" + height="11.428572" + x="240" + y="492.36218" /></flowRegion><flowPara + id="flowPara2991" /></flowRoot> <text + xml:space="preserve" + style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol" + x="362.371" + y="262.51819" + id="text4441" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4443" + x="362.371" + y="262.51819">->expedited_sequence: 3 GP: E,H Wakeup: A</tspan></text> + <rect + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" + id="rect3101" + width="43.158947" + height="26.33428" + x="253.55223" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3" + width="43.158947" + height="26.33428" + x="297.04141" + y="275.07489" /> + <rect + style="fill:#ff8282;fill-opacity:1;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" + id="rect3101-3-6" + width="43.158947" + height="26.33428" + x="427.509" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3-6-7" + width="43.158947" + height="26.33428" + x="384.01981" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3-6-7-5" + width="43.158947" + height="26.33428" + x="340.53061" + y="275.07489" /> + <g + id="g3997" + transform="translate(-0.87295532,0)"> + <rect + y="343.37366" + x="123.95757" + height="26.33428" + width="43.158947" + id="rect3101-35" + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="167.44673" + height="26.33428" + width="43.158947" + id="rect3101-3-62" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="297.91437" + height="26.33428" + width="43.158947" + id="rect3101-3-6-9" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="254.42516" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-1" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="210.93593" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-5-2" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="146.00092" + y="360.25174" + id="text3013" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015" + x="146.00092" + y="360.25174" + style="font-size:10px">:4</tspan></text> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="232.51051" + y="360.18094" + id="text3013-3-3" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6-6" + x="232.51051" + y="360.18094" + style="font-size:10px">C</tspan></text> + </g> + <g + id="g3019" + transform="translate(260.06223,0)"> + <rect + y="343.37366" + x="123.95757" + height="26.33428" + width="43.158947" + id="rect3101-35-0" + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="167.44673" + height="26.33428" + width="43.158947" + id="rect3101-3-62-9" + style="fill:#ff8282;fill-opacity:1;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="297.91437" + height="26.33428" + width="43.158947" + id="rect3101-3-6-9-3" + style="fill:#ff8282;fill-opacity:1;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="254.42516" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-1-6" + style="fill:#ff8282;fill-opacity:1;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="210.93593" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-5-2-0" + style="fill:#ff8282;fill-opacity:1;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="145.54926" + y="360.25174" + id="text3013-3" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6" + x="145.54926" + y="360.25174" + style="font-size:10px">:6</tspan></text> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="232.31764" + y="360.18582" + id="text3013-3-3-7" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6-6-5" + x="232.31764" + y="360.18582" + style="font-size:10px">D</tspan></text> + </g> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="275.59558" + y="291.95297" + id="text3013-36" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-7" + x="275.59558" + y="291.95297" + style="font-size:10px">:6</tspan></text> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="361.97092" + y="291.88705" + id="text3013-3-36" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6-7" + x="361.97092" + y="291.88705" + style="font-size:10px">B</tspan></text> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="405.40396" + y="291.88705" + id="text3013-3-36-3" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6-7-6" + x="405.40396" + y="291.88705" + style="font-size:10px">F</tspan></text> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="449.22031" + y="291.88217" + id="text3013-3-36-3-3" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6-7-6-6" + x="449.22031" + y="291.88217" + style="font-size:10px">G</tspan></text> + </g> +</svg> diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel8.svg b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel8.svg new file mode 100644 index 000000000000..677401551c7d --- /dev/null +++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel8.svg @@ -0,0 +1,311 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Created with Inkscape (http://www.inkscape.org/) --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="490.05093" + height="125.78741" + id="svg2" + version="1.1" + inkscape:version="0.48.4 r9939" + sodipodi:docname="Funnel8.svg"> + <defs + id="defs4"> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend" + style="overflow:visible"> + <path + id="path3792" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lstart" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lstart" + style="overflow:visible"> + <path + id="path3789" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(1.1,0,0,1.1,1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lstart" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lstart-4" + style="overflow:visible"> + <path + id="path3789-9" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(1.1,0,0,1.1,1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend-4" + style="overflow:visible"> + <path + id="path3792-4" + style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + </defs> + <sodipodi:namedview + id="base" + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1.0" + inkscape:pageopacity="0.0" + inkscape:pageshadow="2" + inkscape:zoom="1.3670394" + inkscape:cx="114.01552" + inkscape:cy="-86.548414" + inkscape:document-units="px" + inkscape:current-layer="layer1" + showgrid="false" + inkscape:window-width="1351" + inkscape:window-height="836" + inkscape:window-x="68" + inkscape:window-y="180" + inkscape:window-maximized="0" + fit-margin-top="5" + fit-margin-left="5" + fit-margin-right="5" + fit-margin-bottom="5" /> + <metadata + id="metadata7"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title /> + </cc:Work> + </rdf:RDF> + </metadata> + <g + inkscape:label="Layer 1" + inkscape:groupmode="layer" + id="layer1" + transform="translate(-117.08462,-249.92053)"> + <flowRoot + xml:space="preserve" + id="flowRoot2985" + style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"><flowRegion + id="flowRegion2987"><rect + id="rect2989" + width="82.85714" + height="11.428572" + x="240" + y="492.36218" /></flowRegion><flowPara + id="flowPara2991" /></flowRoot> <text + xml:space="preserve" + style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol" + x="362.371" + y="262.51819" + id="text4441" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4443" + x="362.371" + y="262.51819">->expedited_sequence: 3 GP: E,H</tspan></text> + <rect + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" + id="rect3101" + width="43.158947" + height="26.33428" + x="253.55223" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3" + width="43.158947" + height="26.33428" + x="297.04141" + y="275.07489" /> + <rect + style="fill:#ff8282;fill-opacity:1;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" + id="rect3101-3-6" + width="43.158947" + height="26.33428" + x="427.509" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3-6-7" + width="43.158947" + height="26.33428" + x="384.01981" + y="275.07489" /> + <rect + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" + id="rect3101-3-6-7-5" + width="43.158947" + height="26.33428" + x="340.53061" + y="275.07489" /> + <g + id="g3997" + transform="translate(-0.87295532,0)"> + <rect + y="343.37366" + x="123.95757" + height="26.33428" + width="43.158947" + id="rect3101-35" + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="167.44673" + height="26.33428" + width="43.158947" + id="rect3101-3-62" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="297.91437" + height="26.33428" + width="43.158947" + id="rect3101-3-6-9" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="254.42516" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-1" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <rect + y="343.37366" + x="210.93593" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-5-2" + style="fill:#ff8282;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0;fill-opacity:1" /> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="146.00092" + y="360.25174" + id="text3013" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015" + x="146.00092" + y="360.25174" + style="font-size:10px">:4</tspan></text> + </g> + <g + id="g3019" + transform="translate(260.06223,0)"> + <rect + y="343.37366" + x="123.95757" + height="26.33428" + width="43.158947" + id="rect3101-35-0" + style="fill:none;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="167.44673" + height="26.33428" + width="43.158947" + id="rect3101-3-62-9" + style="fill:#ff8282;fill-opacity:1;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="297.91437" + height="26.33428" + width="43.158947" + id="rect3101-3-6-9-3" + style="fill:#ff8282;fill-opacity:1;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="254.42516" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-1-6" + style="fill:#ff8282;fill-opacity:1;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + y="343.37366" + x="210.93593" + height="26.33428" + width="43.158947" + id="rect3101-3-6-7-5-2-0" + style="fill:#ff8282;fill-opacity:1;stroke:#000000;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" /> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="145.54926" + y="360.25174" + id="text3013-3" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6" + x="145.54926" + y="360.25174" + style="font-size:10px">:6</tspan></text> + </g> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="275.59558" + y="291.95297" + id="text3013-36" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-7" + x="275.59558" + y="291.95297" + style="font-size:10px">:6</tspan></text> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="405.40396" + y="291.88705" + id="text3013-3-36-3" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6-7-6" + x="405.40396" + y="291.88705" + style="font-size:10px">F</tspan></text> + <text + xml:space="preserve" + style="font-size:20px;font-style:normal;font-weight:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Sans" + x="449.22031" + y="291.88217" + id="text3013-3-36-3-3" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan3015-6-7-6-6" + x="449.22031" + y="291.88217" + style="font-size:10px">G</tspan></text> + </g> +</svg> diff --git a/Documentation/RCU/Design/Requirements/Requirements.html b/Documentation/RCU/Design/Requirements/Requirements.html index 39bcb74ea733..21593496aca6 100644 --- a/Documentation/RCU/Design/Requirements/Requirements.html +++ b/Documentation/RCU/Design/Requirements/Requirements.html @@ -1480,7 +1480,7 @@ speed-of-light delays if nothing else. <p> Furthermore, uncertainty about external state is inherent in many cases. -For example, a pair of veternarians might use heartbeat to determine +For example, a pair of veterinarians might use heartbeat to determine whether or not a given cat was alive. But how long should they wait after the last heartbeat to decide that the cat is in fact dead? @@ -1489,9 +1489,9 @@ mean that a relaxed cat would be considered to cycle between death and life more than 100 times per minute. Moreover, just as with human beings, a cat's heart might stop for some period of time, so the exact wait period is a judgment call. -One of our pair of veternarians might wait 30 seconds before pronouncing +One of our pair of veterinarians might wait 30 seconds before pronouncing the cat dead, while the other might insist on waiting a full minute. -The two veternarians would then disagree on the state of the cat during +The two veterinarians would then disagree on the state of the cat during the final 30 seconds of the minute following the last heartbeat. <p> @@ -1945,7 +1945,7 @@ guard against mishaps and misuse: <ol> <li> It is all too easy to forget to use <tt>rcu_read_lock()</tt> everywhere that it is needed, so kernels built with - <tt>CONFIG_PROVE_RCU=y</tt> will spat if + <tt>CONFIG_PROVE_RCU=y</tt> will splat if <tt>rcu_dereference()</tt> is used outside of an RCU read-side critical section. Update-side code can use <tt>rcu_dereference_protected()</tt>, @@ -2421,7 +2421,7 @@ However, there are some restrictions on the code placed within <li> Blocking is prohibited. In practice, this is not a serious restriction given that idle tasks are prohibited from blocking to begin with. -<li> Although nesting <tt>RCU_NONIDLE()</tt> is permited, they cannot +<li> Although nesting <tt>RCU_NONIDLE()</tt> is permitted, they cannot nest indefinitely deeply. However, given that they can be nested on the order of a million deep, even on 32-bit systems, this should not be a serious @@ -2885,7 +2885,7 @@ APIs for defining and initializing <tt>srcu_struct</tt> structures. <h3><a name="Tasks RCU">Tasks RCU</a></h3> <p> -Some forms of tracing use “tramopolines” to handle the +Some forms of tracing use “trampolines” to handle the binary rewriting required to install different types of probes. It would be good to be able to free old trampolines, which sounds like a job for some form of RCU. diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt index 00a3a38b375a..6549012033f9 100644 --- a/Documentation/RCU/trace.txt +++ b/Documentation/RCU/trace.txt @@ -237,7 +237,7 @@ o "ktl" is the low-order 16 bits (in hexadecimal) of the count of The output of "cat rcu/rcu_preempt/rcuexp" looks as follows: -s=21872 wd1=0 wd2=0 wd3=5 n=0 enq=0 sc=21872 +s=21872 wd1=0 wd2=0 wd3=5 enq=0 sc=21872 These fields are as follows: @@ -249,9 +249,6 @@ o "wd1", "wd2", and "wd3" are the number of times that an attempt completed an expedited grace period that satisfies the attempted request. "Our work is done." -o "n" is number of times that a concurrent CPU-hotplug operation - forced a fallback to a normal grace period. - o "enq" is the number of quiescent states still outstanding. o "sc" is the number of times that the attempt to start a diff --git a/Documentation/acpi/acpi-lid.txt b/Documentation/acpi/acpi-lid.txt index effe7af3a5af..22cb3091f297 100644 --- a/Documentation/acpi/acpi-lid.txt +++ b/Documentation/acpi/acpi-lid.txt @@ -59,28 +59,20 @@ button driver uses the following 3 modes in order not to trigger issues. If the userspace hasn't been prepared to ignore the unreliable "opened" events and the unreliable initial state notification, Linux users can use the following kernel parameters to handle the possible issues: -A. button.lid_init_state=method: - When this option is specified, the ACPI button driver reports the - initial lid state using the returning value of the _LID control method - and whether the "opened"/"closed" events are paired fully relies on the - firmware implementation. - This option can be used to fix some platforms where the returning value - of the _LID control method is reliable but the initial lid state - notification is missing. - This option is the default behavior during the period the userspace - isn't ready to handle the buggy AML tables. -B. button.lid_init_state=open: +A. button.lid_init_state=open: When this option is specified, the ACPI button driver always reports the initial lid state as "opened" and whether the "opened"/"closed" events are paired fully relies on the firmware implementation. This may fix some platforms where the returning value of the _LID control method is not reliable and the initial lid state notification is missing. + This option is the default behavior during the period the userspace + isn't ready to handle the buggy AML tables. If the userspace has been prepared to ignore the unreliable "opened" events and the unreliable initial state notification, Linux users should always use the following kernel parameter: -C. button.lid_init_state=ignore: +B. button.lid_init_state=ignore: When this option is specified, the ACPI button driver never reports the initial lid state and there is a compensation mechanism implemented to ensure that the reliable "closed" notifications can always be delievered diff --git a/Documentation/acpi/method-customizing.txt b/Documentation/acpi/method-customizing.txt index 5f55373dd53b..a3f598e141f2 100644 --- a/Documentation/acpi/method-customizing.txt +++ b/Documentation/acpi/method-customizing.txt @@ -57,7 +57,7 @@ Note: To get the ACPI debug object output (Store (AAAA, Debug)), 3. undo your changes The "undo" operation is not supported for a new inserted method right now, i.e. we can not remove a method currently. - For an overrided method, in order to undo your changes, please + For an overridden method, in order to undo your changes, please save a copy of the method original ASL code in step c) section 1, and redo step c) ~ g) to override the method with the original one. diff --git a/Documentation/acpi/method-tracing.txt b/Documentation/acpi/method-tracing.txt index c2505eefc878..0aba14c8f459 100644 --- a/Documentation/acpi/method-tracing.txt +++ b/Documentation/acpi/method-tracing.txt @@ -152,7 +152,7 @@ tracing facility. Users can enable/disable this debug tracing feature by executing the following command: # echo string > /sys/module/acpi/parameters/trace_state - Where "string" should be one of the followings: + Where "string" should be one of the following: "disable" Disable the method tracing feature. "enable" diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 21e2d8863705..986e44387dad 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -106,6 +106,16 @@ use by PCI Format: <irq>,<irq>... + acpi_mask_gpe= [HW,ACPI] + Due to the existence of _Lxx/_Exx, some GPEs triggered + by unsupported hardware/firmware features can result in + GPE floodings that cannot be automatically disabled by + the GPE dispatcher. + This facility can be used to prevent such uncontrolled + GPE floodings. + Format: <int> + Support masking of GPEs numbered from 0x00 to 0x7f. + acpi_no_auto_serialize [HW,ACPI] Disable auto-serialization of AML methods AML control methods that contain the opcodes to create @@ -539,15 +549,6 @@ loops can be debugged more effectively on production systems. - clocksource.arm_arch_timer.fsl-a008585= - [ARM64] - Format: <bool> - Enable/disable the workaround of Freescale/NXP - erratum A-008585. This can be useful for KVM - guests, if the guest device tree doesn't show the - erratum. If unspecified, the workaround is - enabled based on the device tree. - clearcpuid=BITNUM [X86] Disable CPUID feature X for the kernel. See arch/x86/include/asm/cpufeatures.h for the valid bit @@ -956,6 +957,12 @@ serial port must already be setup and configured. Options are not yet supported. + lantiq,<addr> + Start an early, polled-mode console on a lantiq serial + (lqasc) port at the specified address. The serial port + must already be setup and configured. Options are not + yet supported. + lpuart,<addr> lpuart32,<addr> Use early console provided by Freescale LP UART driver @@ -969,9 +976,10 @@ address. The serial port must already be setup and configured. Options are not yet supported. - earlyprintk= [X86,SH,BLACKFIN,ARM,M68k] + earlyprintk= [X86,SH,BLACKFIN,ARM,M68k,S390] earlyprintk=vga earlyprintk=efi + earlyprintk=sclp earlyprintk=xen earlyprintk=serial[,ttySn[,baudrate]] earlyprintk=serial[,0x...[,baudrate]] @@ -1006,6 +1014,8 @@ The xen output can only be used by Xen PV guests. + The sclp output can only be used on s390. + edac_report= [HW,EDAC] Control how to report EDAC event Format: {"on" | "off" | "force"} on: enable EDAC to report H/W event. May be overridden @@ -1191,6 +1201,10 @@ When zero, profiling data is discarded and associated debugfs files are removed at module unload time. + goldfish [X86] Enable the goldfish android emulator platform. + Don't use this when you are not running on the + android emulator + gpt [EFI] Forces disk with valid GPT signature but invalid Protective MBR to be treated as GPT. If the primary GPT is corrupted, it enables the backup/alternate @@ -3268,6 +3282,13 @@ Lazy RCU callbacks are those which RCU can prove do nothing more than free memory. + rcutree.rcu_kick_kthreads= [KNL] + Cause the grace-period kthread to get an extra + wake_up() if it sleeps three times longer than + it should at force-quiescent-state time. + This wake_up() will be accompanied by a + WARN_ONCE() splat and an ftrace_dump(). + rcuperf.gp_exp= [KNL] Measure performance of expedited synchronous grace-period primitives. @@ -3553,6 +3574,10 @@ rhash_entries= [KNL,NET] Set number of hash buckets for route cache + ring3mwait=disable + [KNL] Disable ring 3 MONITOR/MWAIT feature on supported + CPUs. + ro [KNL] Mount root device read-only on boot rodata= [KNL] @@ -3669,6 +3694,14 @@ last alloc / free. For more information see Documentation/vm/slub.txt. + slub_memcg_sysfs= [MM, SLUB] + Determines whether to enable sysfs directories for + memory cgroup sub-caches. 1 to enable, 0 to disable. + The default is determined by CONFIG_SLUB_MEMCG_SYSFS_ON. + Enabling this can lead to a very high number of debug + directories and files being created under + /sys/kernel/slub. + slub_max_order= [MM, SLUB] Determines the maximum allowed order for slabs. A high setting may cause OOMs due to memory @@ -3811,10 +3844,11 @@ it if 0 is given (See Documentation/cgroup-v1/memory.txt) swiotlb= [ARM,IA-64,PPC,MIPS,X86] - Format: { <int> | force } + Format: { <int> | force | noforce } <int> -- Number of I/O TLB slabs force -- force using of bounce buffers even if they wouldn't be automatically used by the kernel + noforce -- Never use bounce buffers (for debugging) switches= [HW,M68k] diff --git a/Documentation/admin-guide/md.rst b/Documentation/admin-guide/md.rst index e449fb5f277c..1e61bf50595c 100644 --- a/Documentation/admin-guide/md.rst +++ b/Documentation/admin-guide/md.rst @@ -725,3 +725,8 @@ These currently include: to 1. Setting this to 0 disables bypass accounting and requires preread stripes to wait until all full-width stripe- writes are complete. Valid values are 0 to stripe_cache_size. + + journal_mode (currently raid5 only) + The cache mode for raid5. raid5 could include an extra disk for + caching. The mode can be "write-throuth" and "write-back". The + default is "write-through". diff --git a/Documentation/admin-guide/ras.rst b/Documentation/admin-guide/ras.rst index d71340e86c27..1b90c6f00a92 100644 --- a/Documentation/admin-guide/ras.rst +++ b/Documentation/admin-guide/ras.rst @@ -81,7 +81,7 @@ That defines some categories of errors: still run, eventually replacing the affected hardware by a hot spare, if available. - Also, when an error happens on an userspace process, it is also possible to + Also, when an error happens on a userspace process, it is also possible to kill such process and let userspace restart it. The mechanism for handling non-fatal errors is usually complex and may @@ -438,11 +438,13 @@ A typical EDAC system has the following structure under │  │  ├── ce_count │  │  ├── ce_noinfo_count │  │  ├── dimm0 + │  │  │  ├── dimm_ce_count │  │  │  ├── dimm_dev_type │  │  │  ├── dimm_edac_mode │  │  │  ├── dimm_label │  │  │  ├── dimm_location │  │  │  ├── dimm_mem_type + │  │  │  ├── dimm_ue_count │  │  │  ├── size │  │  │  └── uevent │  │  ├── max_location @@ -457,11 +459,13 @@ A typical EDAC system has the following structure under │  │  ├── ce_count │  │  ├── ce_noinfo_count │  │  ├── dimm0 + │  │  │  ├── dimm_ce_count │  │  │  ├── dimm_dev_type │  │  │  ├── dimm_edac_mode │  │  │  ├── dimm_label │  │  │  ├── dimm_location │  │  │  ├── dimm_mem_type + │  │  │  ├── dimm_ue_count │  │  │  ├── size │  │  │  └── uevent │  │  ├── max_location @@ -483,6 +487,22 @@ this ``X`` memory module: This attribute file displays, in count of megabytes, the memory that this csrow contains. +- ``dimm_ue_count`` - Uncorrectable Errors count attribute file + + This attribute file displays the total count of uncorrectable + errors that have occurred on this DIMM. If panic_on_ue is set + this counter will not have a chance to increment, since EDAC + will panic the system. + +- ``dimm_ce_count`` - Correctable Errors count attribute file + + This attribute file displays the total count of correctable + errors that have occurred on this DIMM. This count is very + important to examine. CEs provide early indications that a + DIMM is beginning to fail. This count field should be + monitored for non-zero values and report such information + to the system administrator. + - ``dimm_dev_type`` - Device type attribute file This attribute file will display what type of DRAM device is diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README index cd0243302bc1..d7b1f016bd62 100644 --- a/Documentation/arm/sunxi/README +++ b/Documentation/arm/sunxi/README @@ -63,10 +63,18 @@ SunXi family + User Manual http://dl.linux-sunxi.org/A33/A33%20user%20manual%20release%201.1.pdf + - Allwinner H2+ (sun8i) + + No document available now, but is known to be working properly with + H3 drivers and memory map. + - Allwinner H3 (sun8i) + Datasheet http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf + - Allwinner V3s (sun8i) + + Datasheet + http://linux-sunxi.org/File:Allwinner_V3s_Datasheet_V1.0.pdf + * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs - Allwinner A80 + Datasheet diff --git a/Documentation/arm64/cpu-feature-registers.txt b/Documentation/arm64/cpu-feature-registers.txt new file mode 100644 index 000000000000..61ca21ebef1a --- /dev/null +++ b/Documentation/arm64/cpu-feature-registers.txt @@ -0,0 +1,240 @@ + ARM64 CPU Feature Registers + =========================== + +Author: Suzuki K Poulose <suzuki.poulose@arm.com> + + +This file describes the ABI for exporting the AArch64 CPU ID/feature +registers to userspace. The availability of this ABI is advertised +via the HWCAP_CPUID in HWCAPs. + +1. Motivation +--------------- + +The ARM architecture defines a set of feature registers, which describe +the capabilities of the CPU/system. Access to these system registers is +restricted from EL0 and there is no reliable way for an application to +extract this information to make better decisions at runtime. There is +limited information available to the application via HWCAPs, however +there are some issues with their usage. + + a) Any change to the HWCAPs requires an update to userspace (e.g libc) + to detect the new changes, which can take a long time to appear in + distributions. Exposing the registers allows applications to get the + information without requiring updates to the toolchains. + + b) Access to HWCAPs is sometimes limited (e.g prior to libc, or + when ld is initialised at startup time). + + c) HWCAPs cannot represent non-boolean information effectively. The + architecture defines a canonical format for representing features + in the ID registers; this is well defined and is capable of + representing all valid architecture variations. + + +2. Requirements +----------------- + + a) Safety : + Applications should be able to use the information provided by the + infrastructure to run safely across the system. This has greater + implications on a system with heterogeneous CPUs. + The infrastructure exports a value that is safe across all the + available CPU on the system. + + e.g, If at least one CPU doesn't implement CRC32 instructions, while + others do, we should report that the CRC32 is not implemented. + Otherwise an application could crash when scheduled on the CPU + which doesn't support CRC32. + + b) Security : + Applications should only be able to receive information that is + relevant to the normal operation in userspace. Hence, some of the + fields are masked out(i.e, made invisible) and their values are set to + indicate the feature is 'not supported'. See Section 4 for the list + of visible features. Also, the kernel may manipulate the fields + based on what it supports. e.g, If FP is not supported by the + kernel, the values could indicate that the FP is not available + (even when the CPU provides it). + + c) Implementation Defined Features + The infrastructure doesn't expose any register which is + IMPLEMENTATION DEFINED as per ARMv8-A Architecture. + + d) CPU Identification : + MIDR_EL1 is exposed to help identify the processor. On a + heterogeneous system, this could be racy (just like getcpu()). The + process could be migrated to another CPU by the time it uses the + register value, unless the CPU affinity is set. Hence, there is no + guarantee that the value reflects the processor that it is + currently executing on. The REVIDR is not exposed due to this + constraint, as REVIDR makes sense only in conjunction with the + MIDR. Alternately, MIDR_EL1 and REVIDR_EL1 are exposed via sysfs + at: + + /sys/devices/system/cpu/cpu$ID/regs/identification/ + \- midr + \- revidr + +3. Implementation +-------------------- + +The infrastructure is built on the emulation of the 'MRS' instruction. +Accessing a restricted system register from an application generates an +exception and ends up in SIGILL being delivered to the process. +The infrastructure hooks into the exception handler and emulates the +operation if the source belongs to the supported system register space. + +The infrastructure emulates only the following system register space: + Op0=3, Op1=0, CRn=0, CRm=0,4,5,6,7 + +(See Table C5-6 'System instruction encodings for non-Debug System +register accesses' in ARMv8 ARM DDI 0487A.h, for the list of +registers). + +The following rules are applied to the value returned by the +infrastructure: + + a) The value of an 'IMPLEMENTATION DEFINED' field is set to 0. + b) The value of a reserved field is populated with the reserved + value as defined by the architecture. + c) The value of a 'visible' field holds the system wide safe value + for the particular feature (except for MIDR_EL1, see section 4). + d) All other fields (i.e, invisible fields) are set to indicate + the feature is missing (as defined by the architecture). + +4. List of registers with visible features +------------------------------------------- + + 1) ID_AA64ISAR0_EL1 - Instruction Set Attribute Register 0 + x--------------------------------------------------x + | Name | bits | visible | + |--------------------------------------------------| + | RES0 | [63-32] | n | + |--------------------------------------------------| + | RDM | [31-28] | y | + |--------------------------------------------------| + | ATOMICS | [23-20] | y | + |--------------------------------------------------| + | CRC32 | [19-16] | y | + |--------------------------------------------------| + | SHA2 | [15-12] | y | + |--------------------------------------------------| + | SHA1 | [11-8] | y | + |--------------------------------------------------| + | AES | [7-4] | y | + |--------------------------------------------------| + | RES0 | [3-0] | n | + x--------------------------------------------------x + + + 2) ID_AA64PFR0_EL1 - Processor Feature Register 0 + x--------------------------------------------------x + | Name | bits | visible | + |--------------------------------------------------| + | RES0 | [63-28] | n | + |--------------------------------------------------| + | GIC | [27-24] | n | + |--------------------------------------------------| + | AdvSIMD | [23-20] | y | + |--------------------------------------------------| + | FP | [19-16] | y | + |--------------------------------------------------| + | EL3 | [15-12] | n | + |--------------------------------------------------| + | EL2 | [11-8] | n | + |--------------------------------------------------| + | EL1 | [7-4] | n | + |--------------------------------------------------| + | EL0 | [3-0] | n | + x--------------------------------------------------x + + + 3) MIDR_EL1 - Main ID Register + x--------------------------------------------------x + | Name | bits | visible | + |--------------------------------------------------| + | Implementer | [31-24] | y | + |--------------------------------------------------| + | Variant | [23-20] | y | + |--------------------------------------------------| + | Architecture | [19-16] | y | + |--------------------------------------------------| + | PartNum | [15-4] | y | + |--------------------------------------------------| + | Revision | [3-0] | y | + x--------------------------------------------------x + + NOTE: The 'visible' fields of MIDR_EL1 will contain the value + as available on the CPU where it is fetched and is not a system + wide safe value. + +Appendix I: Example +--------------------------- + +/* + * Sample program to demonstrate the MRS emulation ABI. + * + * Copyright (C) 2015-2016, ARM Ltd + * + * Author: Suzuki K Poulose <suzuki.poulose@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <asm/hwcap.h> +#include <stdio.h> +#include <sys/auxv.h> + +#define get_cpu_ftr(id) ({ \ + unsigned long __val; \ + asm("mrs %0, "#id : "=r" (__val)); \ + printf("%-20s: 0x%016lx\n", #id, __val); \ + }) + +int main(void) +{ + + if (!(getauxval(AT_HWCAP) & HWCAP_CPUID)) { + fputs("CPUID registers unavailable\n", stderr); + return 1; + } + + get_cpu_ftr(ID_AA64ISAR0_EL1); + get_cpu_ftr(ID_AA64ISAR1_EL1); + get_cpu_ftr(ID_AA64MMFR0_EL1); + get_cpu_ftr(ID_AA64MMFR1_EL1); + get_cpu_ftr(ID_AA64PFR0_EL1); + get_cpu_ftr(ID_AA64PFR1_EL1); + get_cpu_ftr(ID_AA64DFR0_EL1); + get_cpu_ftr(ID_AA64DFR1_EL1); + + get_cpu_ftr(MIDR_EL1); + get_cpu_ftr(MPIDR_EL1); + get_cpu_ftr(REVIDR_EL1); + +#if 0 + /* Unexposed register access causes SIGILL */ + get_cpu_ftr(ID_MMFR0_EL1); +#endif + + return 0; +} + + + diff --git a/Documentation/arm64/silicon-errata.txt b/Documentation/arm64/silicon-errata.txt index 405da11fc3e4..a71b8095dbd8 100644 --- a/Documentation/arm64/silicon-errata.txt +++ b/Documentation/arm64/silicon-errata.txt @@ -42,24 +42,29 @@ file acts as a registry of software workarounds in the Linux Kernel and will be updated when new workarounds are committed and backported to stable kernels. -| Implementor | Component | Erratum ID | Kconfig | -+----------------+-----------------+-----------------+-------------------------+ -| ARM | Cortex-A53 | #826319 | ARM64_ERRATUM_826319 | -| ARM | Cortex-A53 | #827319 | ARM64_ERRATUM_827319 | -| ARM | Cortex-A53 | #824069 | ARM64_ERRATUM_824069 | -| ARM | Cortex-A53 | #819472 | ARM64_ERRATUM_819472 | -| ARM | Cortex-A53 | #845719 | ARM64_ERRATUM_845719 | -| ARM | Cortex-A53 | #843419 | ARM64_ERRATUM_843419 | -| ARM | Cortex-A57 | #832075 | ARM64_ERRATUM_832075 | -| ARM | Cortex-A57 | #852523 | N/A | -| ARM | Cortex-A57 | #834220 | ARM64_ERRATUM_834220 | -| ARM | Cortex-A72 | #853709 | N/A | -| ARM | MMU-500 | #841119,#826419 | N/A | -| | | | | -| Cavium | ThunderX ITS | #22375, #24313 | CAVIUM_ERRATUM_22375 | -| Cavium | ThunderX ITS | #23144 | CAVIUM_ERRATUM_23144 | -| Cavium | ThunderX GICv3 | #23154 | CAVIUM_ERRATUM_23154 | -| Cavium | ThunderX Core | #27456 | CAVIUM_ERRATUM_27456 | -| Cavium | ThunderX SMMUv2 | #27704 | N/A | -| | | | | -| Freescale/NXP | LS2080A/LS1043A | A-008585 | FSL_ERRATUM_A008585 | +| Implementor | Component | Erratum ID | Kconfig | ++----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A53 | #826319 | ARM64_ERRATUM_826319 | +| ARM | Cortex-A53 | #827319 | ARM64_ERRATUM_827319 | +| ARM | Cortex-A53 | #824069 | ARM64_ERRATUM_824069 | +| ARM | Cortex-A53 | #819472 | ARM64_ERRATUM_819472 | +| ARM | Cortex-A53 | #845719 | ARM64_ERRATUM_845719 | +| ARM | Cortex-A53 | #843419 | ARM64_ERRATUM_843419 | +| ARM | Cortex-A57 | #832075 | ARM64_ERRATUM_832075 | +| ARM | Cortex-A57 | #852523 | N/A | +| ARM | Cortex-A57 | #834220 | ARM64_ERRATUM_834220 | +| ARM | Cortex-A72 | #853709 | N/A | +| ARM | MMU-500 | #841119,#826419 | N/A | +| | | | | +| Cavium | ThunderX ITS | #22375, #24313 | CAVIUM_ERRATUM_22375 | +| Cavium | ThunderX ITS | #23144 | CAVIUM_ERRATUM_23144 | +| Cavium | ThunderX GICv3 | #23154 | CAVIUM_ERRATUM_23154 | +| Cavium | ThunderX Core | #27456 | CAVIUM_ERRATUM_27456 | +| Cavium | ThunderX SMMUv2 | #27704 | N/A | +| | | | | +| Freescale/NXP | LS2080A/LS1043A | A-008585 | FSL_ERRATUM_A008585 | +| | | | | +| Hisilicon | Hip0{5,6,7} | #161010101 | HISILICON_ERRATUM_161010101 | +| | | | | +| Qualcomm Tech. | Falkor v1 | E1003 | QCOM_FALKOR_ERRATUM_1003 | +| Qualcomm Tech. | Falkor v1 | E1009 | QCOM_FALKOR_ERRATUM_1009 | diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt index 51642159aedb..c0a3bb5a6e4e 100644 --- a/Documentation/block/queue-sysfs.txt +++ b/Documentation/block/queue-sysfs.txt @@ -54,9 +54,9 @@ This is the hardware sector size of the device, in bytes. io_poll (RW) ------------ -When read, this file shows the total number of block IO polls and how -many returned success. Writing '0' to this file will disable polling -for this device. Writing any non-zero value will enable this feature. +When read, this file shows whether polling is enabled (1) or disabled +(0). Writing '0' to this file will disable polling for this device. +Writing any non-zero value will enable this feature. io_poll_delay (RW) ------------------ diff --git a/Documentation/blockdev/mflash.txt b/Documentation/blockdev/mflash.txt index 1f610ecf698a..f7e050551487 100644 --- a/Documentation/blockdev/mflash.txt +++ b/Documentation/blockdev/mflash.txt @@ -17,7 +17,7 @@ driver and currently works well under standard IDE subsystem. Actually it's one chip SSD. IO mode is ATA-like custom mode for the host that doesn't have IDE interface. -Followings are brief descriptions about IO mode. +Following are brief descriptions about IO mode. A. IO mode based on ATA protocol and uses some custom command. (read confirm, write confirm) B. IO mode uses SRAM bus interface. diff --git a/Documentation/blockdev/zram.txt b/Documentation/blockdev/zram.txt index 0535ae1f73e5..4fced8a21307 100644 --- a/Documentation/blockdev/zram.txt +++ b/Documentation/blockdev/zram.txt @@ -161,42 +161,14 @@ Name access description disksize RW show and set the device's disk size initstate RO shows the initialization state of the device reset WO trigger device reset -num_reads RO the number of reads -failed_reads RO the number of failed reads -num_write RO the number of writes -failed_writes RO the number of failed writes -invalid_io RO the number of non-page-size-aligned I/O requests +mem_used_max WO reset the `mem_used_max' counter (see later) +mem_limit WO specifies the maximum amount of memory ZRAM can use + to store the compressed data max_comp_streams RW the number of possible concurrent compress operations comp_algorithm RW show and change the compression algorithm -notify_free RO the number of notifications to free pages (either - slot free notifications or REQ_DISCARD requests) -zero_pages RO the number of zero filled pages written to this disk -orig_data_size RO uncompressed size of data stored in this disk -compr_data_size RO compressed size of data stored in this disk -mem_used_total RO the amount of memory allocated for this disk -mem_used_max RW the maximum amount of memory zram have consumed to - store the data (to reset this counter to the actual - current value, write 1 to this attribute) -mem_limit RW the maximum amount of memory ZRAM can use to store - the compressed data -pages_compacted RO the number of pages freed during compaction - (available only via zram<id>/mm_stat node) compact WO trigger memory compaction debug_stat RO this file is used for zram debugging purposes -WARNING -======= -per-stat sysfs attributes are considered to be deprecated. -The basic strategy is: --- the existing RW nodes will be downgraded to WO nodes (in linux 4.11) --- deprecated RO sysfs nodes will eventually be removed (in linux 4.11) - -The list of deprecated attributes can be found here: -Documentation/ABI/obsolete/sysfs-block-zram - -Basically, every attribute that has its own read accessible sysfs node -(e.g. num_reads) *AND* is accessible via one of the stat files (zram<id>/stat -or zram<id>/io_stat or zram<id>/mm_stat) is considered to be deprecated. User space is advised to use the following files to read the device statistics. @@ -211,22 +183,40 @@ The stat file represents device's I/O statistics not accounted by block layer and, thus, not available in zram<id>/stat file. It consists of a single line of text and contains the following stats separated by whitespace: - failed_reads - failed_writes - invalid_io - notify_free + failed_reads the number of failed reads + failed_writes the number of failed writes + invalid_io the number of non-page-size-aligned I/O requests + notify_free Depending on device usage scenario it may account + a) the number of pages freed because of swap slot free + notifications or b) the number of pages freed because of + REQ_DISCARD requests sent by bio. The former ones are + sent to a swap block device when a swap slot is freed, + which implies that this disk is being used as a swap disk. + The latter ones are sent by filesystem mounted with + discard option, whenever some data blocks are getting + discarded. File /sys/block/zram<id>/mm_stat The stat file represents device's mm statistics. It consists of a single line of text and contains the following stats separated by whitespace: - orig_data_size - compr_data_size - mem_used_total - mem_limit - mem_used_max - zero_pages - num_migrated + orig_data_size uncompressed size of data stored in this disk. + This excludes same-element-filled pages (same_pages) since + no memory is allocated for them. + Unit: bytes + compr_data_size compressed size of data stored in this disk + mem_used_total the amount of memory allocated for this disk. This + includes allocator fragmentation and metadata overhead, + allocated for this disk. So, allocator space efficiency + can be calculated using compr_data_size and this statistic. + Unit: bytes + mem_limit the maximum amount of memory ZRAM can use to store + the compressed data + mem_used_max the maximum amount of memory zram have consumed to + store the data + same_pages the number of same element filled pages written to this disk. + No memory is allocated for such pages. + pages_compacted the number of pages freed during compaction 9) Deactivate: swapoff /dev/zram0 diff --git a/Documentation/cdrom/cdrom-standard.tex b/Documentation/cdrom/cdrom-standard.tex index c06233fe52ac..8f85b0e41046 100644 --- a/Documentation/cdrom/cdrom-standard.tex +++ b/Documentation/cdrom/cdrom-standard.tex @@ -249,7 +249,6 @@ struct& cdrom_device_ops\ \{ \hidewidth\cr unsigned\ long);\cr \noalign{\medskip} &const\ int& capability;& capability flags \cr - &int& n_minors;& number of active minor devices \cr \};\cr } $$ @@ -258,13 +257,7 @@ it should add a function pointer to this $struct$. When a particular function is not implemented, however, this $struct$ should contain a NULL instead. The $capability$ flags specify the capabilities of the \cdrom\ hardware and/or low-level \cdrom\ driver when a \cdrom\ drive -is registered with the \UCD. The value $n_minors$ should be a positive -value indicating the number of minor devices that are supported by -the low-level device driver, normally~1. Although these two variables -are `informative' rather than `operational,' they are included in -$cdrom_device_ops$ because they describe the capability of the {\em -driver\/} rather than the {\em drive}. Nomenclature has always been -difficult in computer programming. +is registered with the \UCD. Note that most functions have fewer parameters than their $blkdev_fops$ counterparts. This is because very little of the diff --git a/Documentation/cgroup-v1/rdma.txt b/Documentation/cgroup-v1/rdma.txt new file mode 100644 index 000000000000..af618171e0eb --- /dev/null +++ b/Documentation/cgroup-v1/rdma.txt @@ -0,0 +1,109 @@ + RDMA Controller + ---------------- + +Contents +-------- + +1. Overview + 1-1. What is RDMA controller? + 1-2. Why RDMA controller needed? + 1-3. How is RDMA controller implemented? +2. Usage Examples + +1. Overview + +1-1. What is RDMA controller? +----------------------------- + +RDMA controller allows user to limit RDMA/IB specific resources that a given +set of processes can use. These processes are grouped using RDMA controller. + +RDMA controller defines two resources which can be limited for processes of a +cgroup. + +1-2. Why RDMA controller needed? +-------------------------------- + +Currently user space applications can easily take away all the rdma verb +specific resources such as AH, CQ, QP, MR etc. Due to which other applications +in other cgroup or kernel space ULPs may not even get chance to allocate any +rdma resources. This can leads to service unavailability. + +Therefore RDMA controller is needed through which resource consumption +of processes can be limited. Through this controller different rdma +resources can be accounted. + +1-3. How is RDMA controller implemented? +---------------------------------------- + +RDMA cgroup allows limit configuration of resources. Rdma cgroup maintains +resource accounting per cgroup, per device using resource pool structure. +Each such resource pool is limited up to 64 resources in given resource pool +by rdma cgroup, which can be extended later if required. + +This resource pool object is linked to the cgroup css. Typically there +are 0 to 4 resource pool instances per cgroup, per device in most use cases. +But nothing limits to have it more. At present hundreds of RDMA devices per +single cgroup may not be handled optimally, however there is no +known use case or requirement for such configuration either. + +Since RDMA resources can be allocated from any process and can be freed by any +of the child processes which shares the address space, rdma resources are +always owned by the creator cgroup css. This allows process migration from one +to other cgroup without major complexity of transferring resource ownership; +because such ownership is not really present due to shared nature of +rdma resources. Linking resources around css also ensures that cgroups can be +deleted after processes migrated. This allow progress migration as well with +active resources, even though that is not a primary use case. + +Whenever RDMA resource charging occurs, owner rdma cgroup is returned to +the caller. Same rdma cgroup should be passed while uncharging the resource. +This also allows process migrated with active RDMA resource to charge +to new owner cgroup for new resource. It also allows to uncharge resource of +a process from previously charged cgroup which is migrated to new cgroup, +even though that is not a primary use case. + +Resource pool object is created in following situations. +(a) User sets the limit and no previous resource pool exist for the device +of interest for the cgroup. +(b) No resource limits were configured, but IB/RDMA stack tries to +charge the resource. So that it correctly uncharge them when applications are +running without limits and later on when limits are enforced during uncharging, +otherwise usage count will drop to negative. + +Resource pool is destroyed if all the resource limits are set to max and +it is the last resource getting deallocated. + +User should set all the limit to max value if it intents to remove/unconfigure +the resource pool for a particular device. + +IB stack honors limits enforced by the rdma controller. When application +query about maximum resource limits of IB device, it returns minimum of +what is configured by user for a given cgroup and what is supported by +IB device. + +Following resources can be accounted by rdma controller. + hca_handle Maximum number of HCA Handles + hca_object Maximum number of HCA Objects + +2. Usage Examples +----------------- + +(a) Configure resource limit: +echo mlx4_0 hca_handle=2 hca_object=2000 > /sys/fs/cgroup/rdma/1/rdma.max +echo ocrdma1 hca_handle=3 > /sys/fs/cgroup/rdma/2/rdma.max + +(b) Query resource limit: +cat /sys/fs/cgroup/rdma/2/rdma.max +#Output: +mlx4_0 hca_handle=2 hca_object=2000 +ocrdma1 hca_handle=3 hca_object=max + +(c) Query current usage: +cat /sys/fs/cgroup/rdma/2/rdma.current +#Output: +mlx4_0 hca_handle=1 hca_object=20 +ocrdma1 hca_handle=1 hca_object=23 + +(d) Delete resource limit: +echo echo mlx4_0 hca_handle=max hca_object=max > /sys/fs/cgroup/rdma/1/rdma.max diff --git a/Documentation/cgroup-v2.txt b/Documentation/cgroup-v2.txt index 4cc07ce3b8dd..3b8449f8ac7e 100644 --- a/Documentation/cgroup-v2.txt +++ b/Documentation/cgroup-v2.txt @@ -47,6 +47,12 @@ CONTENTS 5-3. IO 5-3-1. IO Interface Files 5-3-2. Writeback + 5-4. PID + 5-4-1. PID Interface Files + 5-5. RDMA + 5-5-1. RDMA Interface Files + 5-6. Misc + 5-6-1. perf_event 6. Namespace 6-1. Basics 6-2. The Root and Views @@ -328,14 +334,12 @@ a process with a non-root euid to migrate a target process into a cgroup by writing its PID to the "cgroup.procs" file, the following conditions must be met. -- The writer's euid must match either uid or suid of the target process. - - The writer must have write access to the "cgroup.procs" file. - The writer must have write access to the "cgroup.procs" file of the common ancestor of the source and destination cgroups. -The above three constraints ensure that while a delegatee may migrate +The above two constraints ensure that while a delegatee may migrate processes around freely in the delegated sub-hierarchy it can't pull in from or push out to outside the sub-hierarchy. @@ -350,10 +354,10 @@ all processes under C0 and C1 belong to U0. Let's also say U0 wants to write the PID of a process which is currently in C10 into "C00/cgroup.procs". U0 has write access to the -file and uid match on the process; however, the common ancestor of the -source cgroup C10 and the destination cgroup C00 is above the points -of delegation and U0 would not have write access to its "cgroup.procs" -files and thus the write will be denied with -EACCES. +file; however, the common ancestor of the source cgroup C10 and the +destination cgroup C00 is above the points of delegation and U0 would +not have write access to its "cgroup.procs" files and thus the write +will be denied with -EACCES. 2-6. Guidelines @@ -1119,6 +1123,91 @@ writeback as follows. vm.dirty[_background]_ratio. +5-4. PID + +The process number controller is used to allow a cgroup to stop any +new tasks from being fork()'d or clone()'d after a specified limit is +reached. + +The number of tasks in a cgroup can be exhausted in ways which other +controllers cannot prevent, thus warranting its own controller. For +example, a fork bomb is likely to exhaust the number of tasks before +hitting memory restrictions. + +Note that PIDs used in this controller refer to TIDs, process IDs as +used by the kernel. + + +5-4-1. PID Interface Files + + pids.max + + A read-write single value file which exists on non-root cgroups. The + default is "max". + + Hard limit of number of processes. + + pids.current + + A read-only single value file which exists on all cgroups. + + The number of processes currently in the cgroup and its descendants. + +Organisational operations are not blocked by cgroup policies, so it is +possible to have pids.current > pids.max. This can be done by either +setting the limit to be smaller than pids.current, or attaching enough +processes to the cgroup such that pids.current is larger than +pids.max. However, it is not possible to violate a cgroup PID policy +through fork() or clone(). These will return -EAGAIN if the creation +of a new process would cause a cgroup policy to be violated. + + +5-5. RDMA + +The "rdma" controller regulates the distribution and accounting of +of RDMA resources. + +5-5-1. RDMA Interface Files + + rdma.max + A readwrite nested-keyed file that exists for all the cgroups + except root that describes current configured resource limit + for a RDMA/IB device. + + Lines are keyed by device name and are not ordered. + Each line contains space separated resource name and its configured + limit that can be distributed. + + The following nested keys are defined. + + hca_handle Maximum number of HCA Handles + hca_object Maximum number of HCA Objects + + An example for mlx4 and ocrdma device follows. + + mlx4_0 hca_handle=2 hca_object=2000 + ocrdma1 hca_handle=3 hca_object=max + + rdma.current + A read-only file that describes current resource usage. + It exists for all the cgroup except root. + + An example for mlx4 and ocrdma device follows. + + mlx4_0 hca_handle=1 hca_object=20 + ocrdma1 hca_handle=1 hca_object=23 + + +5-6. Misc + +5-6-1. perf_event + +perf_event controller, if not mounted on a legacy hierarchy, is +automatically enabled on the v2 hierarchy so that perf events can +always be filtered by cgroup v2 path. The controller can still be +moved to a legacy hierarchy after v2 hierarchy is populated. + + 6. Namespace 6-1. Basics diff --git a/Documentation/cpu-freq/core.txt b/Documentation/cpu-freq/core.txt index 4bc7287806de..978463a7c81e 100644 --- a/Documentation/cpu-freq/core.txt +++ b/Documentation/cpu-freq/core.txt @@ -8,6 +8,8 @@ Dominik Brodowski <linux@brodo.de> David Kimdon <dwhedon@debian.org> + Rafael J. Wysocki <rafael.j.wysocki@intel.com> + Viresh Kumar <viresh.kumar@linaro.org> @@ -36,10 +38,11 @@ speed limits (like LCD drivers on ARM architecture). Additionally, the kernel "constant" loops_per_jiffy is updated on frequency changes here. -Reference counting is done by cpufreq_get_cpu and cpufreq_put_cpu, -which make sure that the cpufreq processor driver is correctly -registered with the core, and will not be unloaded until -cpufreq_put_cpu is called. +Reference counting of the cpufreq policies is done by cpufreq_cpu_get +and cpufreq_cpu_put, which make sure that the cpufreq driver is +correctly registered with the core, and will not be unloaded until +cpufreq_put_cpu is called. That also ensures that the respective cpufreq +policy doesn't get freed while being used. 2. CPUFreq notifiers ==================== @@ -69,18 +72,16 @@ CPUFreq policy notifier is called twice for a policy transition: The phase is specified in the second argument to the notifier. The third argument, a void *pointer, points to a struct cpufreq_policy -consisting of five values: cpu, min, max, policy and max_cpu_freq. min -and max are the lower and upper frequencies (in kHz) of the new -policy, policy the new policy, cpu the number of the affected CPU; and -max_cpu_freq the maximum supported CPU frequency. This value is given -for informational purposes only. +consisting of several values, including min, max (the lower and upper +frequencies (in kHz) of the new policy). 2.2 CPUFreq transition notifiers -------------------------------- -These are notified twice when the CPUfreq driver switches the CPU core -frequency and this change has any external implications. +These are notified twice for each online CPU in the policy, when the +CPUfreq driver switches the CPU core frequency and this change has no +any external implications. The second argument specifies the phase - CPUFREQ_PRECHANGE or CPUFREQ_POSTCHANGE. @@ -90,6 +91,7 @@ values: cpu - number of the affected CPU old - old frequency new - new frequency +flags - flags of the cpufreq driver 3. CPUFreq Table Generation with Operating Performance Point (OPP) ================================================================== diff --git a/Documentation/cpu-freq/cpu-drivers.txt b/Documentation/cpu-freq/cpu-drivers.txt index 772b94fde264..f71e6be26b83 100644 --- a/Documentation/cpu-freq/cpu-drivers.txt +++ b/Documentation/cpu-freq/cpu-drivers.txt @@ -9,6 +9,8 @@ Dominik Brodowski <linux@brodo.de> + Rafael J. Wysocki <rafael.j.wysocki@intel.com> + Viresh Kumar <viresh.kumar@linaro.org> @@ -49,49 +51,65 @@ using cpufreq_register_driver() What shall this struct cpufreq_driver contain? -cpufreq_driver.name - The name of this driver. + .name - The name of this driver. -cpufreq_driver.init - A pointer to the per-CPU initialization - function. + .init - A pointer to the per-policy initialization function. -cpufreq_driver.verify - A pointer to a "verification" function. + .verify - A pointer to a "verification" function. -cpufreq_driver.setpolicy _or_ -cpufreq_driver.target/ -target_index - See below on the differences. + .setpolicy _or_ .fast_switch _or_ .target _or_ .target_index - See + below on the differences. And optionally -cpufreq_driver.exit - A pointer to a per-CPU cleanup - function called during CPU_POST_DEAD - phase of cpu hotplug process. + .flags - Hints for the cpufreq core. -cpufreq_driver.stop_cpu - A pointer to a per-CPU stop function - called during CPU_DOWN_PREPARE phase of - cpu hotplug process. + .driver_data - cpufreq driver specific data. -cpufreq_driver.resume - A pointer to a per-CPU resume function - which is called with interrupts disabled - and _before_ the pre-suspend frequency - and/or policy is restored by a call to - ->target/target_index or ->setpolicy. + .resolve_freq - Returns the most appropriate frequency for a target + frequency. Doesn't change the frequency though. -cpufreq_driver.attr - A pointer to a NULL-terminated list of - "struct freq_attr" which allow to - export values to sysfs. + .get_intermediate and target_intermediate - Used to switch to stable + frequency while changing CPU frequency. -cpufreq_driver.get_intermediate -and target_intermediate Used to switch to stable frequency while - changing CPU frequency. + .get - Returns current frequency of the CPU. + + .bios_limit - Returns HW/BIOS max frequency limitations for the CPU. + + .exit - A pointer to a per-policy cleanup function called during + CPU_POST_DEAD phase of cpu hotplug process. + + .stop_cpu - A pointer to a per-policy stop function called during + CPU_DOWN_PREPARE phase of cpu hotplug process. + + .suspend - A pointer to a per-policy suspend function which is called + with interrupts disabled and _after_ the governor is stopped for the + policy. + + .resume - A pointer to a per-policy resume function which is called + with interrupts disabled and _before_ the governor is started again. + + .ready - A pointer to a per-policy ready function which is called after + the policy is fully initialized. + + .attr - A pointer to a NULL-terminated list of "struct freq_attr" which + allow to export values to sysfs. + + .boost_enabled - If set, boost frequencies are enabled. + + .set_boost - A pointer to a per-policy function to enable/disable boost + frequencies. 1.2 Per-CPU Initialization -------------------------- Whenever a new CPU is registered with the device model, or after the -cpufreq driver registers itself, the per-CPU initialization function -cpufreq_driver.init is called. It takes a struct cpufreq_policy -*policy as argument. What to do now? +cpufreq driver registers itself, the per-policy initialization function +cpufreq_driver.init is called if no cpufreq policy existed for the CPU. +Note that the .init() and .exit() routines are called only once for the +policy and not for each CPU managed by the policy. It takes a struct +cpufreq_policy *policy as argument. What to do now? If necessary, activate the CPUfreq support on your CPU. @@ -117,47 +135,45 @@ policy->governor must contain the "default policy" for cpufreq_driver.setpolicy or cpufreq_driver.target/target_index is called with these values. +policy->cpus Update this with the masks of the + (online + offline) CPUs that do DVFS + along with this CPU (i.e. that share + clock/voltage rails with it). For setting some of these values (cpuinfo.min[max]_freq, policy->min[max]), the frequency table helpers might be helpful. See the section 2 for more information on them. -SMP systems normally have same clock source for a group of cpus. For these the -.init() would be called only once for the first online cpu. Here the .init() -routine must initialize policy->cpus with mask of all possible cpus (Online + -Offline) that share the clock. Then the core would copy this mask onto -policy->related_cpus and will reset policy->cpus to carry only online cpus. - 1.3 verify ------------- +---------- When the user decides a new policy (consisting of "policy,governor,min,max") shall be set, this policy must be validated so that incompatible values can be corrected. For verifying these -values, a frequency table helper and/or the -cpufreq_verify_within_limits(struct cpufreq_policy *policy, unsigned -int min_freq, unsigned int max_freq) function might be helpful. See -section 2 for details on frequency table helpers. +values cpufreq_verify_within_limits(struct cpufreq_policy *policy, +unsigned int min_freq, unsigned int max_freq) function might be helpful. +See section 2 for details on frequency table helpers. You need to make sure that at least one valid frequency (or operating range) is within policy->min and policy->max. If necessary, increase policy->max first, and only if this is no solution, decrease policy->min. -1.4 target/target_index or setpolicy? ----------------------------- +1.4 target or target_index or setpolicy or fast_switch? +------------------------------------------------------- Most cpufreq drivers or even most cpu frequency scaling algorithms -only allow the CPU to be set to one frequency. For these, you use the -->target/target_index call. +only allow the CPU frequency to be set to predefined fixed values. For +these, you use the ->target(), ->target_index() or ->fast_switch() +callbacks. -Some cpufreq-capable processors switch the frequency between certain -limits on their own. These shall use the ->setpolicy call +Some cpufreq capable processors switch the frequency between certain +limits on their own. These shall use the ->setpolicy() callback. 1.5. target/target_index -------------- +------------------------ The target_index call has two arguments: struct cpufreq_policy *policy, and unsigned int index (into the exposed frequency table). @@ -186,9 +202,20 @@ actual frequency must be determined using the following rules: Here again the frequency table helper might assist you - see section 2 for details. +1.6. fast_switch +---------------- -1.6 setpolicy ---------------- +This function is used for frequency switching from scheduler's context. +Not all drivers are expected to implement it, as sleeping from within +this callback isn't allowed. This callback must be highly optimized to +do switching as fast as possible. + +This function has two arguments: struct cpufreq_policy *policy and +unsigned int target_frequency. + + +1.7 setpolicy +------------- The setpolicy call only takes a struct cpufreq_policy *policy as argument. You need to set the lower limit of the in-processor or @@ -198,7 +225,7 @@ setting when policy->policy is CPUFREQ_POLICY_PERFORMANCE, and a powersaving-oriented setting when CPUFREQ_POLICY_POWERSAVE. Also check the reference implementation in drivers/cpufreq/longrun.c -1.7 get_intermediate and target_intermediate +1.8 get_intermediate and target_intermediate -------------------------------------------- Only for drivers with target_index() and CPUFREQ_ASYNC_NOTIFICATION unset. @@ -222,42 +249,36 @@ failures as core would send notifications for that. As most cpufreq processors only allow for being set to a few specific frequencies, a "frequency table" with some functions might assist in -some work of the processor driver. Such a "frequency table" consists -of an array of struct cpufreq_frequency_table entries, with any value in -"driver_data" you want to use, and the corresponding frequency in -"frequency". At the end of the table, you need to add a -cpufreq_frequency_table entry with frequency set to CPUFREQ_TABLE_END. And -if you want to skip one entry in the table, set the frequency to -CPUFREQ_ENTRY_INVALID. The entries don't need to be in ascending -order. - -By calling cpufreq_table_validate_and_show(struct cpufreq_policy *policy, - struct cpufreq_frequency_table *table); -the cpuinfo.min_freq and cpuinfo.max_freq values are detected, and -policy->min and policy->max are set to the same values. This is -helpful for the per-CPU initialization stage. - -int cpufreq_frequency_table_verify(struct cpufreq_policy *policy, - struct cpufreq_frequency_table *table); -assures that at least one valid frequency is within policy->min and -policy->max, and all other criteria are met. This is helpful for the -->verify call. - -int cpufreq_frequency_table_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation); - -is the corresponding frequency table helper for the ->target -stage. Just pass the values to this function, and this function -returns the number of the frequency table entry which contains -the frequency the CPU shall be set to. +some work of the processor driver. Such a "frequency table" consists of +an array of struct cpufreq_frequency_table entries, with driver specific +values in "driver_data", the corresponding frequency in "frequency" and +flags set. At the end of the table, you need to add a +cpufreq_frequency_table entry with frequency set to CPUFREQ_TABLE_END. +And if you want to skip one entry in the table, set the frequency to +CPUFREQ_ENTRY_INVALID. The entries don't need to be in sorted in any +particular order, but if they are cpufreq core will do DVFS a bit +quickly for them as search for best match is faster. + +By calling cpufreq_table_validate_and_show(), the cpuinfo.min_freq and +cpuinfo.max_freq values are detected, and policy->min and policy->max +are set to the same values. This is helpful for the per-CPU +initialization stage. + +cpufreq_frequency_table_verify() assures that at least one valid +frequency is within policy->min and policy->max, and all other criteria +are met. This is helpful for the ->verify call. + +cpufreq_frequency_table_target() is the corresponding frequency table +helper for the ->target stage. Just pass the values to this function, +and this function returns the of the frequency table entry which +contains the frequency the CPU shall be set to. The following macros can be used as iterators over cpufreq_frequency_table: cpufreq_for_each_entry(pos, table) - iterates over all entries of frequency table. -cpufreq-for_each_valid_entry(pos, table) - iterates over all entries, +cpufreq_for_each_valid_entry(pos, table) - iterates over all entries, excluding CPUFREQ_ENTRY_INVALID frequencies. Use arguments "pos" - a cpufreq_frequency_table * as a loop cursor and "table" - the cpufreq_frequency_table * you want to iterate over. diff --git a/Documentation/cpu-freq/cpufreq-stats.txt b/Documentation/cpu-freq/cpufreq-stats.txt index 3c355f6ad834..2bbe207354ed 100644 --- a/Documentation/cpu-freq/cpufreq-stats.txt +++ b/Documentation/cpu-freq/cpufreq-stats.txt @@ -34,10 +34,10 @@ cpufreq stats provides following statistics (explained in detail below). - total_trans - trans_table -All the statistics will be from the time the stats driver has been inserted -to the time when a read of a particular statistic is done. Obviously, stats -driver will not have any information about the frequency transitions before -the stats driver insertion. +All the statistics will be from the time the stats driver has been inserted +(or the time the stats were reset) to the time when a read of a particular +statistic is done. Obviously, stats driver will not have any information +about the frequency transitions before the stats driver insertion. -------------------------------------------------------------------------------- <mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # ls -l @@ -110,25 +110,13 @@ Config Main Menu CPU Frequency scaling ---> [*] CPU Frequency scaling [*] CPU frequency translation statistics - [*] CPU frequency translation statistics details "CPU Frequency scaling" (CONFIG_CPU_FREQ) should be enabled to configure cpufreq-stats. "CPU frequency translation statistics" (CONFIG_CPU_FREQ_STAT) provides the -basic statistics which includes time_in_state and total_trans. +statistics which includes time_in_state, total_trans and trans_table. -"CPU frequency translation statistics details" (CONFIG_CPU_FREQ_STAT_DETAILS) -provides fine grained cpufreq stats by trans_table. The reason for having a -separate config option for trans_table is: -- trans_table goes against the traditional /sysfs rule of one value per - interface. It provides a whole bunch of value in a 2 dimensional matrix - form. - -Once these two options are enabled and your CPU supports cpufrequency, you +Once this option is enabled and your CPU supports cpufrequency, you will be able to see the CPU frequency statistics in /sysfs. - - - - diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt index c15aa75f5227..61b3184b6c24 100644 --- a/Documentation/cpu-freq/governors.txt +++ b/Documentation/cpu-freq/governors.txt @@ -10,6 +10,8 @@ Dominik Brodowski <linux@brodo.de> some additions and corrections by Nico Golde <nico@ngolde.de> + Rafael J. Wysocki <rafael.j.wysocki@intel.com> + Viresh Kumar <viresh.kumar@linaro.org> @@ -28,32 +30,27 @@ Contents: 2.3 Userspace 2.4 Ondemand 2.5 Conservative +2.6 Schedutil 3. The Governor Interface in the CPUfreq Core +4. References 1. What Is A CPUFreq Governor? ============================== Most cpufreq drivers (except the intel_pstate and longrun) or even most -cpu frequency scaling algorithms only offer the CPU to be set to one -frequency. In order to offer dynamic frequency scaling, the cpufreq -core must be able to tell these drivers of a "target frequency". So -these specific drivers will be transformed to offer a "->target/target_index" -call instead of the existing "->setpolicy" call. For "longrun", all -stays the same, though. +cpu frequency scaling algorithms only allow the CPU frequency to be set +to predefined fixed values. In order to offer dynamic frequency +scaling, the cpufreq core must be able to tell these drivers of a +"target frequency". So these specific drivers will be transformed to +offer a "->target/target_index/fast_switch()" call instead of the +"->setpolicy()" call. For set_policy drivers, all stays the same, +though. How to decide what frequency within the CPUfreq policy should be used? -That's done using "cpufreq governors". Two are already in this patch --- they're the already existing "powersave" and "performance" which -set the frequency statically to the lowest or highest frequency, -respectively. At least two more such governors will be ready for -addition in the near future, but likely many more as there are various -different theories and models about dynamic frequency scaling -around. Using such a generic interface as cpufreq offers to scaling -governors, these can be tested extensively, and the best one can be -selected for each specific use. +That's done using "cpufreq governors". Basically, it's the following flow graph: @@ -71,7 +68,7 @@ CPU can be set to switch independently | CPU can only be set / the limits of policy->{min,max} / \ / \ - Using the ->setpolicy call, Using the ->target/target_index call, + Using the ->setpolicy call, Using the ->target/target_index/fast_switch call, the limits and the the frequency closest "policy" is set. to target_freq is set. It is assured that it @@ -109,114 +106,159 @@ directory. 2.4 Ondemand ------------ -The CPUfreq governor "ondemand" sets the CPU depending on the -current usage. To do this the CPU must have the capability to -switch the frequency very quickly. There are a number of sysfs file -accessible parameters: - -sampling_rate: measured in uS (10^-6 seconds), this is how often you -want the kernel to look at the CPU usage and to make decisions on -what to do about the frequency. Typically this is set to values of -around '10000' or more. It's default value is (cmp. with users-guide.txt): -transition_latency * 1000 -Be aware that transition latency is in ns and sampling_rate is in us, so you -get the same sysfs value by default. -Sampling rate should always get adjusted considering the transition latency -To set the sampling rate 750 times as high as the transition latency -in the bash (as said, 1000 is default), do: -echo `$(($(cat cpuinfo_transition_latency) * 750 / 1000)) \ - >ondemand/sampling_rate - -sampling_rate_min: -The sampling rate is limited by the HW transition latency: -transition_latency * 100 -Or by kernel restrictions: -If CONFIG_NO_HZ_COMMON is set, the limit is 10ms fixed. -If CONFIG_NO_HZ_COMMON is not set or nohz=off boot parameter is used, the -limits depend on the CONFIG_HZ option: -HZ=1000: min=20000us (20ms) -HZ=250: min=80000us (80ms) -HZ=100: min=200000us (200ms) -The highest value of kernel and HW latency restrictions is shown and -used as the minimum sampling rate. - -up_threshold: defines what the average CPU usage between the samplings -of 'sampling_rate' needs to be for the kernel to make a decision on -whether it should increase the frequency. For example when it is set -to its default value of '95' it means that between the checking -intervals the CPU needs to be on average more than 95% in use to then -decide that the CPU frequency needs to be increased. - -ignore_nice_load: this parameter takes a value of '0' or '1'. When -set to '0' (its default), all processes are counted towards the -'cpu utilisation' value. When set to '1', the processes that are -run with a 'nice' value will not count (and thus be ignored) in the -overall usage calculation. This is useful if you are running a CPU -intensive calculation on your laptop that you do not care how long it -takes to complete as you can 'nice' it and prevent it from taking part -in the deciding process of whether to increase your CPU frequency. - -sampling_down_factor: this parameter controls the rate at which the -kernel makes a decision on when to decrease the frequency while running -at top speed. When set to 1 (the default) decisions to reevaluate load -are made at the same interval regardless of current clock speed. But -when set to greater than 1 (e.g. 100) it acts as a multiplier for the -scheduling interval for reevaluating load when the CPU is at its top -speed due to high load. This improves performance by reducing the overhead -of load evaluation and helping the CPU stay at its top speed when truly -busy, rather than shifting back and forth in speed. This tunable has no -effect on behavior at lower speeds/lower CPU loads. - -powersave_bias: this parameter takes a value between 0 to 1000. It -defines the percentage (times 10) value of the target frequency that -will be shaved off of the target. For example, when set to 100 -- 10%, -when ondemand governor would have targeted 1000 MHz, it will target -1000 MHz - (10% of 1000 MHz) = 900 MHz instead. This is set to 0 -(disabled) by default. -When AMD frequency sensitivity powersave bias driver -- -drivers/cpufreq/amd_freq_sensitivity.c is loaded, this parameter -defines the workload frequency sensitivity threshold in which a lower -frequency is chosen instead of ondemand governor's original target. -The frequency sensitivity is a hardware reported (on AMD Family 16h -Processors and above) value between 0 to 100% that tells software how -the performance of the workload running on a CPU will change when -frequency changes. A workload with sensitivity of 0% (memory/IO-bound) -will not perform any better on higher core frequency, whereas a -workload with sensitivity of 100% (CPU-bound) will perform better -higher the frequency. When the driver is loaded, this is set to 400 -by default -- for CPUs running workloads with sensitivity value below -40%, a lower frequency is chosen. Unloading the driver or writing 0 -will disable this feature. +The CPUfreq governor "ondemand" sets the CPU frequency depending on the +current system load. Load estimation is triggered by the scheduler +through the update_util_data->func hook; when triggered, cpufreq checks +the CPU-usage statistics over the last period and the governor sets the +CPU accordingly. The CPU must have the capability to switch the +frequency very quickly. + +Sysfs files: + +* sampling_rate: + + Measured in uS (10^-6 seconds), this is how often you want the kernel + to look at the CPU usage and to make decisions on what to do about the + frequency. Typically this is set to values of around '10000' or more. + It's default value is (cmp. with users-guide.txt): transition_latency + * 1000. Be aware that transition latency is in ns and sampling_rate + is in us, so you get the same sysfs value by default. Sampling rate + should always get adjusted considering the transition latency to set + the sampling rate 750 times as high as the transition latency in the + bash (as said, 1000 is default), do: + + $ echo `$(($(cat cpuinfo_transition_latency) * 750 / 1000)) > ondemand/sampling_rate + +* sampling_rate_min: + + The sampling rate is limited by the HW transition latency: + transition_latency * 100 + + Or by kernel restrictions: + - If CONFIG_NO_HZ_COMMON is set, the limit is 10ms fixed. + - If CONFIG_NO_HZ_COMMON is not set or nohz=off boot parameter is + used, the limits depend on the CONFIG_HZ option: + HZ=1000: min=20000us (20ms) + HZ=250: min=80000us (80ms) + HZ=100: min=200000us (200ms) + + The highest value of kernel and HW latency restrictions is shown and + used as the minimum sampling rate. + +* up_threshold: + + This defines what the average CPU usage between the samplings of + 'sampling_rate' needs to be for the kernel to make a decision on + whether it should increase the frequency. For example when it is set + to its default value of '95' it means that between the checking + intervals the CPU needs to be on average more than 95% in use to then + decide that the CPU frequency needs to be increased. + +* ignore_nice_load: + + This parameter takes a value of '0' or '1'. When set to '0' (its + default), all processes are counted towards the 'cpu utilisation' + value. When set to '1', the processes that are run with a 'nice' + value will not count (and thus be ignored) in the overall usage + calculation. This is useful if you are running a CPU intensive + calculation on your laptop that you do not care how long it takes to + complete as you can 'nice' it and prevent it from taking part in the + deciding process of whether to increase your CPU frequency. + +* sampling_down_factor: + + This parameter controls the rate at which the kernel makes a decision + on when to decrease the frequency while running at top speed. When set + to 1 (the default) decisions to reevaluate load are made at the same + interval regardless of current clock speed. But when set to greater + than 1 (e.g. 100) it acts as a multiplier for the scheduling interval + for reevaluating load when the CPU is at its top speed due to high + load. This improves performance by reducing the overhead of load + evaluation and helping the CPU stay at its top speed when truly busy, + rather than shifting back and forth in speed. This tunable has no + effect on behavior at lower speeds/lower CPU loads. + +* powersave_bias: + + This parameter takes a value between 0 to 1000. It defines the + percentage (times 10) value of the target frequency that will be + shaved off of the target. For example, when set to 100 -- 10%, when + ondemand governor would have targeted 1000 MHz, it will target + 1000 MHz - (10% of 1000 MHz) = 900 MHz instead. This is set to 0 + (disabled) by default. + + When AMD frequency sensitivity powersave bias driver -- + drivers/cpufreq/amd_freq_sensitivity.c is loaded, this parameter + defines the workload frequency sensitivity threshold in which a lower + frequency is chosen instead of ondemand governor's original target. + The frequency sensitivity is a hardware reported (on AMD Family 16h + Processors and above) value between 0 to 100% that tells software how + the performance of the workload running on a CPU will change when + frequency changes. A workload with sensitivity of 0% (memory/IO-bound) + will not perform any better on higher core frequency, whereas a + workload with sensitivity of 100% (CPU-bound) will perform better + higher the frequency. When the driver is loaded, this is set to 400 by + default -- for CPUs running workloads with sensitivity value below + 40%, a lower frequency is chosen. Unloading the driver or writing 0 + will disable this feature. 2.5 Conservative ---------------- The CPUfreq governor "conservative", much like the "ondemand" -governor, sets the CPU depending on the current usage. It differs in -behaviour in that it gracefully increases and decreases the CPU speed -rather than jumping to max speed the moment there is any load on the -CPU. This behaviour more suitable in a battery powered environment. -The governor is tweaked in the same manner as the "ondemand" governor -through sysfs with the addition of: - -freq_step: this describes what percentage steps the cpu freq should be -increased and decreased smoothly by. By default the cpu frequency will -increase in 5% chunks of your maximum cpu frequency. You can change this -value to anywhere between 0 and 100 where '0' will effectively lock your -CPU at a speed regardless of its load whilst '100' will, in theory, make -it behave identically to the "ondemand" governor. - -down_threshold: same as the 'up_threshold' found for the "ondemand" -governor but for the opposite direction. For example when set to its -default value of '20' it means that if the CPU usage needs to be below -20% between samples to have the frequency decreased. - -sampling_down_factor: similar functionality as in "ondemand" governor. -But in "conservative", it controls the rate at which the kernel makes -a decision on when to decrease the frequency while running in any -speed. Load for frequency increase is still evaluated every -sampling rate. +governor, sets the CPU frequency depending on the current usage. It +differs in behaviour in that it gracefully increases and decreases the +CPU speed rather than jumping to max speed the moment there is any load +on the CPU. This behaviour is more suitable in a battery powered +environment. The governor is tweaked in the same manner as the +"ondemand" governor through sysfs with the addition of: + +* freq_step: + + This describes what percentage steps the cpu freq should be increased + and decreased smoothly by. By default the cpu frequency will increase + in 5% chunks of your maximum cpu frequency. You can change this value + to anywhere between 0 and 100 where '0' will effectively lock your CPU + at a speed regardless of its load whilst '100' will, in theory, make + it behave identically to the "ondemand" governor. + +* down_threshold: + + Same as the 'up_threshold' found for the "ondemand" governor but for + the opposite direction. For example when set to its default value of + '20' it means that if the CPU usage needs to be below 20% between + samples to have the frequency decreased. + +* sampling_down_factor: + + Similar functionality as in "ondemand" governor. But in + "conservative", it controls the rate at which the kernel makes a + decision on when to decrease the frequency while running in any speed. + Load for frequency increase is still evaluated every sampling rate. + + +2.6 Schedutil +------------- + +The "schedutil" governor aims at better integration with the Linux +kernel scheduler. Load estimation is achieved through the scheduler's +Per-Entity Load Tracking (PELT) mechanism, which also provides +information about the recent load [1]. This governor currently does +load based DVFS only for tasks managed by CFS. RT and DL scheduler tasks +are always run at the highest frequency. Unlike all the other +governors, the code is located under the kernel/sched/ directory. + +Sysfs files: + +* rate_limit_us: + + This contains a value in microseconds. The governor waits for + rate_limit_us time before reevaluating the load again, after it has + evaluated the load once. + +For an in-depth comparison with the other governors refer to [2]. + 3. The Governor Interface in the CPUfreq Core ============================================= @@ -225,26 +267,10 @@ A new governor must register itself with the CPUfreq core using "cpufreq_register_governor". The struct cpufreq_governor, which has to be passed to that function, must contain the following values: -governor->name - A unique name for this governor -governor->governor - The governor callback function -governor->owner - .THIS_MODULE for the governor module (if - appropriate) - -The governor->governor callback is called with the current (or to-be-set) -cpufreq_policy struct for that CPU, and an unsigned int event. The -following events are currently defined: - -CPUFREQ_GOV_START: This governor shall start its duty for the CPU - policy->cpu -CPUFREQ_GOV_STOP: This governor shall end its duty for the CPU - policy->cpu -CPUFREQ_GOV_LIMITS: The limits for CPU policy->cpu have changed to - policy->min and policy->max. - -If you need other "events" externally of your driver, _only_ use the -cpufreq_governor_l(unsigned int cpu, unsigned int event) call to the -CPUfreq core to ensure proper locking. +governor->name - A unique name for this governor. +governor->owner - .THIS_MODULE for the governor module (if appropriate). +plus a set of hooks to the functions implementing the governor's logic. The CPUfreq governor may call the CPU processor driver using one of these two functions: @@ -258,12 +284,18 @@ int __cpufreq_driver_target(struct cpufreq_policy *policy, unsigned int relation); target_freq must be within policy->min and policy->max, of course. -What's the difference between these two functions? When your governor -still is in a direct code path of a call to governor->governor, the -per-CPU cpufreq lock is still held in the cpufreq core, and there's -no need to lock it again (in fact, this would cause a deadlock). So -use __cpufreq_driver_target only in these cases. In all other cases -(for example, when there's a "daemonized" function that wakes up -every second), use cpufreq_driver_target to lock the cpufreq per-CPU -lock before the command is passed to the cpufreq processor driver. +What's the difference between these two functions? When your governor is +in a direct code path of a call to governor callbacks, like +governor->start(), the policy->rwsem is still held in the cpufreq core, +and there's no need to lock it again (in fact, this would cause a +deadlock). So use __cpufreq_driver_target only in these cases. In all +other cases (for example, when there's a "daemonized" function that +wakes up every second), use cpufreq_driver_target to take policy->rwsem +before the command is passed to the cpufreq driver. + +4. References +============= + +[1] Per-entity load tracking: https://lwn.net/Articles/531853/ +[2] Improvements in CPU frequency management: https://lwn.net/Articles/682391/ diff --git a/Documentation/cpu-freq/index.txt b/Documentation/cpu-freq/index.txt index dc024ab4054f..ef1d39247b05 100644 --- a/Documentation/cpu-freq/index.txt +++ b/Documentation/cpu-freq/index.txt @@ -18,16 +18,29 @@ Documents in this directory: ---------------------------- + +amd-powernow.txt - AMD powernow driver specific file. + +boost.txt - Frequency boosting support. + core.txt - General description of the CPUFreq core and - of CPUFreq notifiers + of CPUFreq notifiers. + +cpu-drivers.txt - How to implement a new cpufreq processor driver. -cpu-drivers.txt - How to implement a new cpufreq processor driver +cpufreq-nforce2.txt - nVidia nForce2 platform specific file. + +cpufreq-stats.txt - General description of sysfs cpufreq stats. governors.txt - What are cpufreq governors and how to implement them? index.txt - File index, Mailing list and Links (this document) +intel-pstate.txt - Intel pstate cpufreq driver specific file. + +pcc-cpufreq.txt - PCC cpufreq driver specific file. + user-guide.txt - User Guide to CPUFreq @@ -35,9 +48,7 @@ Mailing List ------------ There is a CPU frequency changing CVS commit and general list where you can report bugs, problems or submit patches. To post a message, -send an email to linux-pm@vger.kernel.org, to subscribe go to -http://vger.kernel.org/vger-lists.html#linux-pm and follow the -instructions there. +send an email to linux-pm@vger.kernel.org. Links ----- @@ -48,7 +59,7 @@ how to access the CVS repository: * http://cvs.arm.linux.org.uk/ the CPUFreq Mailing list: -* http://vger.kernel.org/vger-lists.html#cpufreq +* http://vger.kernel.org/vger-lists.html#linux-pm Clock and voltage scaling for the SA-1100: * http://www.lartmaker.nl/projects/scaling diff --git a/Documentation/cpu-freq/intel-pstate.txt b/Documentation/cpu-freq/intel-pstate.txt index 1953994ef5e6..3fdcdfd968ba 100644 --- a/Documentation/cpu-freq/intel-pstate.txt +++ b/Documentation/cpu-freq/intel-pstate.txt @@ -85,6 +85,21 @@ Sysfs will show : Refer to "Intel® 64 and IA-32 Architectures Software Developer’s Manual Volume 3: System Programming Guide" to understand ratios. +There is one more sysfs attribute in /sys/devices/system/cpu/intel_pstate/ +that can be used for controlling the operation mode of the driver: + + status: Three settings are possible: + "off" - The driver is not in use at this time. + "active" - The driver works as a P-state governor (default). + "passive" - The driver works as a regular cpufreq one and collaborates + with the generic cpufreq governors (it sets P-states as + requested by those governors). + The current setting is returned by reads from this attribute. Writing one + of the above strings to it changes the operation mode as indicated by that + string, if possible. If HW-managed P-states (HWP) are enabled, it is not + possible to change the driver's operation mode and attempts to write to + this attribute will fail. + cpufreq sysfs for Intel P-State Since this driver registers with cpufreq, cpufreq sysfs is also presented. diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt index 5e10d5f4d9b0..391da64e9492 100644 --- a/Documentation/cpu-freq/user-guide.txt +++ b/Documentation/cpu-freq/user-guide.txt @@ -18,7 +18,7 @@ Contents: --------- 1. Supported Architectures and Processors -1.1 ARM +1.1 ARM and ARM64 1.2 x86 1.3 sparc64 1.4 ppc @@ -37,16 +37,10 @@ Contents: 1. Supported Architectures and Processors ========================================= -1.1 ARM -------- - -The following ARM processors are supported by cpufreq: - -ARM Integrator -ARM-SA1100 -ARM-SA1110 -Intel PXA +1.1 ARM and ARM64 +----------------- +Almost all ARM and ARM64 platforms support CPU frequency scaling. 1.2 x86 ------- @@ -69,6 +63,7 @@ Transmeta Crusoe Transmeta Efficeon VIA Cyrix 3 / C3 various processors on some ACPI 2.0-compatible systems [*] +And many more [*] Only if "ACPI Processor Performance States" are available to the ACPI<->BIOS interface. @@ -149,10 +144,19 @@ mounted it at /sys, the cpufreq interface is located in a subdirectory "cpufreq" within the cpu-device directory (e.g. /sys/devices/system/cpu/cpu0/cpufreq/ for the first CPU). +affected_cpus : List of Online CPUs that require software + coordination of frequency. + +cpuinfo_cur_freq : Current frequency of the CPU as obtained from + the hardware, in KHz. This is the frequency + the CPU actually runs at. + cpuinfo_min_freq : this file shows the minimum operating frequency the processor can run at(in kHz) + cpuinfo_max_freq : this file shows the maximum operating frequency the processor can run at(in kHz) + cpuinfo_transition_latency The time it takes on this CPU to switch between two frequencies in nano seconds. If unknown or known to be @@ -165,25 +169,30 @@ cpuinfo_transition_latency The time it takes on this CPU to userspace daemon. Make sure to not switch the frequency too often resulting in performance loss. -scaling_driver : this file shows what cpufreq driver is - used to set the frequency on this CPU + +related_cpus : List of Online + Offline CPUs that need software + coordination of frequency. + +scaling_available_frequencies : List of available frequencies, in KHz. scaling_available_governors : this file shows the CPUfreq governors available in this kernel. You can see the currently activated governor in +scaling_cur_freq : Current frequency of the CPU as determined by + the governor and cpufreq core, in KHz. This is + the frequency the kernel thinks the CPU runs + at. + +scaling_driver : this file shows what cpufreq driver is + used to set the frequency on this CPU + scaling_governor, and by "echoing" the name of another governor you can change it. Please note that some governors won't load - they only work on some specific architectures or processors. -cpuinfo_cur_freq : Current frequency of the CPU as obtained from - the hardware, in KHz. This is the frequency - the CPU actually runs at. - -scaling_available_frequencies : List of available frequencies, in KHz. - scaling_min_freq and scaling_max_freq show the current "policy limits" (in kHz). By echoing new values into these @@ -192,16 +201,11 @@ scaling_max_freq show the current "policy limits" (in first set scaling_max_freq, then scaling_min_freq. -affected_cpus : List of Online CPUs that require software - coordination of frequency. - -related_cpus : List of Online + Offline CPUs that need software - coordination of frequency. - -scaling_cur_freq : Current frequency of the CPU as determined by - the governor and cpufreq core, in KHz. This is - the frequency the kernel thinks the CPU runs - at. +scaling_setspeed This can be read to get the currently programmed + value by the governor. This can be written to + change the current frequency for a group of + CPUs, represented by a policy. This is supported + currently only by the userspace governor. bios_limit : If the BIOS tells the OS to limit a CPU to lower frequencies, the user can read out the diff --git a/Documentation/crypto/api-digest.rst b/Documentation/crypto/api-digest.rst index 07356fa99200..7a1e670d6ce1 100644 --- a/Documentation/crypto/api-digest.rst +++ b/Documentation/crypto/api-digest.rst @@ -14,7 +14,7 @@ Asynchronous Message Digest API :doc: Asynchronous Message Digest API .. kernel-doc:: include/crypto/hash.h - :functions: crypto_alloc_ahash crypto_free_ahash crypto_ahash_init crypto_ahash_digestsize crypto_ahash_reqtfm crypto_ahash_reqsize crypto_ahash_setkey crypto_ahash_finup crypto_ahash_final crypto_ahash_digest crypto_ahash_export crypto_ahash_import + :functions: crypto_alloc_ahash crypto_free_ahash crypto_ahash_init crypto_ahash_digestsize crypto_ahash_reqtfm crypto_ahash_reqsize crypto_ahash_statesize crypto_ahash_setkey crypto_ahash_finup crypto_ahash_final crypto_ahash_digest crypto_ahash_export crypto_ahash_import Asynchronous Hash Request Handle -------------------------------- diff --git a/Documentation/crypto/api-skcipher.rst b/Documentation/crypto/api-skcipher.rst index b20028a361a9..4eec4a93f7e3 100644 --- a/Documentation/crypto/api-skcipher.rst +++ b/Documentation/crypto/api-skcipher.rst @@ -59,4 +59,4 @@ Synchronous Block Cipher API - Deprecated :doc: Synchronous Block Cipher API .. kernel-doc:: include/linux/crypto.h - :functions: crypto_alloc_blkcipher rypto_free_blkcipher crypto_has_blkcipher crypto_blkcipher_name crypto_blkcipher_ivsize crypto_blkcipher_blocksize crypto_blkcipher_setkey crypto_blkcipher_encrypt crypto_blkcipher_encrypt_iv crypto_blkcipher_decrypt crypto_blkcipher_decrypt_iv crypto_blkcipher_set_iv crypto_blkcipher_get_iv + :functions: crypto_alloc_blkcipher crypto_free_blkcipher crypto_has_blkcipher crypto_blkcipher_name crypto_blkcipher_ivsize crypto_blkcipher_blocksize crypto_blkcipher_setkey crypto_blkcipher_encrypt crypto_blkcipher_encrypt_iv crypto_blkcipher_decrypt crypto_blkcipher_decrypt_iv crypto_blkcipher_set_iv crypto_blkcipher_get_iv diff --git a/Documentation/device-mapper/cache.txt b/Documentation/device-mapper/cache.txt index 785eab87aa71..f228604ddbcd 100644 --- a/Documentation/device-mapper/cache.txt +++ b/Documentation/device-mapper/cache.txt @@ -207,6 +207,10 @@ Optional feature arguments are: block, then the cache block is invalidated. To enable passthrough mode the cache must be clean. + metadata2 : use version 2 of the metadata. This stores the dirty bits + in a separate btree, which improves speed of shutting + down the cache. + A policy called 'default' is always registered. This is an alias for the policy we currently think is giving best all round performance. diff --git a/Documentation/device-mapper/dm-raid.txt b/Documentation/device-mapper/dm-raid.txt index 5e3786fd9ea7..cd2cb2fc85ea 100644 --- a/Documentation/device-mapper/dm-raid.txt +++ b/Documentation/device-mapper/dm-raid.txt @@ -161,6 +161,15 @@ The target is named "raid" and it accepts the following parameters: the RAID type (i.e. the allocation algorithm) as well, e.g. changing from raid5_ls to raid5_n. + [journal_dev <dev>] + This option adds a journal device to raid4/5/6 raid sets and + uses it to close the 'write hole' caused by the non-atomic updates + to the component devices which can cause data loss during recovery. + The journal device is used as writethrough thus causing writes to + be throttled versus non-journaled raid4/5/6 sets. + Takeover/reshape is not possible with a raid4/5/6 journal device; + it has to be deconfigured before requesting these. + <#raid_devs>: The number of devices composing the array. Each device consists of two entries. The first is the device containing the metadata (if any); the second is the one containing the @@ -245,6 +254,9 @@ recovery. Here is a fuller description of the individual fields: <data_offset> The current data offset to the start of the user data on each component device of a raid set (see the respective raid parameter to support out-of-place reshaping). + <journal_char> 'A' - active raid4/5/6 journal device. + 'D' - dead journal device. + '-' - no journal device. Message Interface @@ -307,10 +319,15 @@ Version History 1.5.2 'mismatch_cnt' is zero unless [last_]sync_action is "check". 1.6.0 Add discard support (and devices_handle_discard_safely module param). 1.7.0 Add support for MD RAID0 mappings. -1.8.0 Explictely check for compatible flags in the superblock metadata +1.8.0 Explicitly check for compatible flags in the superblock metadata and reject to start the raid set if any are set by a newer target version, thus avoiding data corruption on a raid set with a reshape in progress. 1.9.0 Add support for RAID level takeover/reshape/region size and set size reduction. 1.9.1 Fix activation of existing RAID 4/10 mapped devices +1.9.2 Don't emit '- -' on the status table line in case the constructor + fails reading a superblock. Correctly emit 'maj:min1 maj:min2' and + 'D' on the status line. If '- -' is passed into the constructor, emit + '- -' on the table line and '-' as the status line health character. +1.10.0 Add support for raid4/5/6 journal device diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 9b2b41ab6817..c246cd2730d9 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -40,6 +40,8 @@ Board compatible values: - "hardkernel,odroid-c2" (Meson gxbb) - "amlogic,p200" (Meson gxbb) - "amlogic,p201" (Meson gxbb) + - "wetek,hub" (Meson gxbb) + - "wetek,play2" (Meson gxbb) - "amlogic,p212" (Meson gxl s905x) - "amlogic,p230" (Meson gxl s905d) - "amlogic,p231" (Meson gxl s905d) diff --git a/Documentation/devicetree/bindings/arm/arch_timer.txt b/Documentation/devicetree/bindings/arm/arch_timer.txt index ad440a2b8051..e926aea1147d 100644 --- a/Documentation/devicetree/bindings/arm/arch_timer.txt +++ b/Documentation/devicetree/bindings/arm/arch_timer.txt @@ -31,6 +31,12 @@ to deliver its interrupts via SPIs. This also affects writes to the tval register, due to the implicit counter read. +- hisilicon,erratum-161010101 : A boolean property. Indicates the + presence of Hisilicon erratum 161010101, which says that reading the + counters is unreliable in some cases, and reads may return a value 32 + beyond the correct value. This also affects writes to the tval + registers, due to the implicit counter read. + ** Optional properties: - arm,cpu-registers-not-fw-configured : Firmware does not initialize diff --git a/Documentation/devicetree/bindings/arm/axentia.txt b/Documentation/devicetree/bindings/arm/axentia.txt new file mode 100644 index 000000000000..ea3fb96ae465 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/axentia.txt @@ -0,0 +1,19 @@ +Device tree bindings for Axentia ARM devices +============================================ + +Linea CPU module +---------------- + +Required root node properties: +compatible = "axentia,linea", + "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; +and following the rules from atmel-at91.txt for a sama5d31 SoC. + + +TSE-850 v3 board +---------------- + +Required root node properties: +compatible = "axentia,tse850v3", "axentia,linea", + "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; +and following the rules from above for the axentia,linea CPU module. diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index a1bcfeed5f24..698ad1f097fa 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -158,6 +158,7 @@ nodes to be present and contain the properties described below. "arm,cortex-a53" "arm,cortex-a57" "arm,cortex-a72" + "arm,cortex-a73" "arm,cortex-m0" "arm,cortex-m0+" "arm,cortex-m1" @@ -202,6 +203,7 @@ nodes to be present and contain the properties described below. "marvell,armada-380-smp" "marvell,armada-390-smp" "marvell,armada-xp-smp" + "marvell,98dx3236-smp" "mediatek,mt6589-smp" "mediatek,mt81xx-tz-smp" "qcom,gcc-msm8660" diff --git a/Documentation/devicetree/bindings/arm/davinci.txt b/Documentation/devicetree/bindings/arm/davinci.txt index f0841ce725b5..715622c36260 100644 --- a/Documentation/devicetree/bindings/arm/davinci.txt +++ b/Documentation/devicetree/bindings/arm/davinci.txt @@ -13,6 +13,10 @@ EnBW AM1808 based CMC board Required root node properties: - compatible = "enbw,cmc", "ti,da850; +LEGO MINDSTORMS EV3 (AM1808 based) +Required root node properties: + - compatible = "lego,ev3", "ti,da850"; + Generic DaVinci Boards ---------------------- diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index d6ee9c6e1dbb..c9c567ae227f 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -108,7 +108,7 @@ status. - compatible: Should contain a chip-specific compatible string, Chip-specific strings are of the form "fsl,<chip>-scfg", The following <chip>s are known to be supported: - ls1021a, ls1043a, ls1046a, ls2080a. + ls1012a, ls1021a, ls1043a, ls1046a, ls2080a. - reg: should contain base address and length of SCFG memory-mapped registers @@ -126,7 +126,7 @@ core start address and release the secondary core from holdoff and startup. - compatible: Should contain a chip-specific compatible string, Chip-specific strings are of the form "fsl,<chip>-dcfg", The following <chip>s are known to be supported: - ls1021a, ls1043a, ls1046a, ls2080a. + ls1012a, ls1021a, ls1043a, ls1046a, ls2080a. - reg : should contain base address and length of DCFG memory-mapped registers @@ -139,6 +139,22 @@ Example: Freescale ARMv8 based Layerscape SoC family Device Tree Bindings ---------------------------------------------------------------- +LS1012A SoC +Required root node properties: + - compatible = "fsl,ls1012a"; + +LS1012A ARMv8 based RDB Board +Required root node properties: + - compatible = "fsl,ls1012a-rdb", "fsl,ls1012a"; + +LS1012A ARMv8 based FRDM Board +Required root node properties: + - compatible = "fsl,ls1012a-frdm", "fsl,ls1012a"; + +LS1012A ARMv8 based QDS Board +Required root node properties: + - compatible = "fsl,ls1012a-qds", "fsl,ls1012a"; + LS1043A SoC Required root node properties: - compatible = "fsl,ls1043a"; diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt index 7df79a715611..f1c1e21a8110 100644 --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt @@ -1,5 +1,9 @@ Hisilicon Platforms Device Tree Bindings ---------------------------------------------------- +Hi3660 SoC +Required root node properties: + - compatible = "hisilicon,hi3660"; + Hi4511 Board Required root node properties: - compatible = "hisilicon,hi3620-hi4511"; diff --git a/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt new file mode 100644 index 000000000000..26eb9d3aa630 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt @@ -0,0 +1,16 @@ +Resume Control +-------------- +Available on Marvell SOCs: 98DX3336 and 98DX4251 + +Required properties: + +- compatible: must be "marvell,98dx3336-resume-ctrl" + +- reg: Should contain resume control registers location and length + +Example: + +resume@20980 { + compatible = "marvell,98dx3336-resume-ctrl"; + reg = <0x20980 0x10>; +}; diff --git a/Documentation/devicetree/bindings/arm/marvell/98dx3236.txt b/Documentation/devicetree/bindings/arm/marvell/98dx3236.txt new file mode 100644 index 000000000000..64e8c73fc5ab --- /dev/null +++ b/Documentation/devicetree/bindings/arm/marvell/98dx3236.txt @@ -0,0 +1,23 @@ +Marvell 98DX3236, 98DX3336 and 98DX4251 Platforms Device Tree Bindings +---------------------------------------------------------------------- + +Boards with a SoC of the Marvell 98DX3236, 98DX3336 and 98DX4251 families +shall have the following property: + +Required root node property: + +compatible: must contain "marvell,armadaxp-98dx3236" + +In addition, boards using the Marvell 98DX3336 SoC shall have the +following property: + +Required root node property: + +compatible: must contain "marvell,armadaxp-98dx3336" + +In addition, boards using the Marvell 98DX4251 SoC shall have the +following property: + +Required root node property: + +compatible: must contain "marvell,armadaxp-98dx4251" diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 05f95c3ed7d4..8219b2c6bb29 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -151,6 +151,9 @@ Boards: - AM335X SBC-T335 : single board computer, built around the Sitara AM3352/4 compatible = "compulab,sbc-t335", "compulab,cm-t335", "ti,am33xx" +- AM335X phyCORE-AM335x: Development kit + compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx" + - OMAP5 EVM : Evaluation Module compatible = "ti,omap5-evm", "ti,omap5" diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt index 253bf9b86690..c9502634316d 100644 --- a/Documentation/devicetree/bindings/arm/shmobile.txt +++ b/Documentation/devicetree/bindings/arm/shmobile.txt @@ -75,7 +75,7 @@ Boards: compatible = "renesas,rskrza1", "renesas,r7s72100" - Salvator-X (RTP0RC7795SIPB0010S) compatible = "renesas,salvator-x", "renesas,r8a7795"; - - Salvator-X + - Salvator-X (RTP0RC7796SIPB0011S) compatible = "renesas,salvator-x", "renesas,r8a7796"; - SILK (RTP0RC7794LCB00011S) compatible = "renesas,silk", "renesas,r8a7794" diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt index 4d6467cc2aa2..d2c46449b4eb 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.txt +++ b/Documentation/devicetree/bindings/arm/sunxi.txt @@ -12,6 +12,7 @@ using one of the following compatible strings: allwinner,sun8i-a23 allwinner,sun8i-a33 allwinner,sun8i-a83t + allwinner,sun8i-h2-plus allwinner,sun8i-h3 allwinner,sun9i-a80 allwinner,sun50i-a64 diff --git a/Documentation/devicetree/bindings/ata/ahci-da850.txt b/Documentation/devicetree/bindings/ata/ahci-da850.txt new file mode 100644 index 000000000000..5f8193417725 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/ahci-da850.txt @@ -0,0 +1,18 @@ +Device tree binding for the TI DA850 AHCI SATA Controller +--------------------------------------------------------- + +Required properties: + - compatible: must be "ti,da850-ahci" + - reg: physical base addresses and sizes of the two register regions + used by the controller: the register map as defined by the + AHCI 1.1 standard and the Power Down Control Register (PWRDN) + for enabling/disabling the SATA clock receiver + - interrupts: interrupt specifier (refer to the interrupt binding) + +Example: + + sata: sata@218000 { + compatible = "ti,da850-ahci"; + reg = <0x218000 0x2000>, <0x22c018 0x4>; + interrupts = <67>; + }; diff --git a/Documentation/devicetree/bindings/bus/qcom,ebi2.txt b/Documentation/devicetree/bindings/bus/qcom,ebi2.txt index 920681f552db..5a7d567f6833 100644 --- a/Documentation/devicetree/bindings/bus/qcom,ebi2.txt +++ b/Documentation/devicetree/bindings/bus/qcom,ebi2.txt @@ -51,7 +51,7 @@ Required properties: - compatible: should be one of: "qcom,msm8660-ebi2" "qcom,apq8060-ebi2" -- #address-cells: shoule be <2>: the first cell is the chipselect, +- #address-cells: should be <2>: the first cell is the chipselect, the second cell is the offset inside the memory range - #size-cells: should be <1> - ranges: should be set to: @@ -64,7 +64,7 @@ Required properties: - reg: two ranges of registers: EBI2 config and XMEM config areas - reg-names: should be "ebi2", "xmem" - clocks: two clocks, EBI_2X and EBI -- clock-names: shoule be "ebi2x", "ebi2" +- clock-names: should be "ebi2x", "ebi2" Optional subnodes: - Nodes inside the EBI2 will be considered device nodes. @@ -100,7 +100,7 @@ Optional properties arrays for FAST chip selects: assertion, with respect to the cycle where ADV (address valid) is asserted. 2 means 2 cycles between ADV and OE. Valid values 0, 1, 2 or 3. - qcom,xmem-read-hold-cycles: the length in cycles of the first segment of a - read transfer. For a single read trandfer this will be the time from CS + read transfer. For a single read transfer this will be the time from CS assertion to OE assertion. Valid values 0 thru 15. diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt index e56a1df3a9d3..dd906db34b32 100644 --- a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt +++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt @@ -16,7 +16,20 @@ Required properties: - #clock-cells: Should be <1>. The permitted clock-specifier values can be found in include/dt-bindings/clock/bcm2835.h - reg: Specifies base physical address and size of the registers -- clocks: The external oscillator clock phandle +- clocks: phandles to the parent clocks used as input to the module, in + the following order: + + - External oscillator + - DSI0 byte clock + - DSI0 DDR2 clock + - DSI0 DDR clock + - DSI1 byte clock + - DSI1 DDR2 clock + - DSI1 DDR clock + + Only external oscillator is required. The DSI clocks may + not be present, in which case their children will be + unusable. Example: diff --git a/Documentation/devicetree/bindings/clock/exynos4415-clock.txt b/Documentation/devicetree/bindings/clock/exynos4415-clock.txt deleted file mode 100644 index 847d98bae8cf..000000000000 --- a/Documentation/devicetree/bindings/clock/exynos4415-clock.txt +++ /dev/null @@ -1,38 +0,0 @@ -* Samsung Exynos4415 Clock Controller - -The Exynos4415 clock controller generates and supplies clock to various -consumer devices within the Exynos4415 SoC. - -Required properties: - -- compatible: should be one of the following: - - "samsung,exynos4415-cmu" - for the main system clocks controller - (CMU_LEFTBUS, CMU_RIGHTBUS, CMU_TOP, CMU_CPU clock domains). - - "samsung,exynos4415-cmu-dmc" - for the Exynos4415 SoC DRAM Memory - Controller (DMC) domain clock controller. - -- reg: physical base address of the controller and length of memory mapped - region. - -- #clock-cells: should be 1. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. - -All available clocks are defined as preprocessor macros in -dt-bindings/clock/exynos4415.h header and can be used in device -tree sources. - -Example 1: An example of a clock controller node is listed below. - - cmu: clock-controller@10030000 { - compatible = "samsung,exynos4415-cmu"; - reg = <0x10030000 0x18000>; - #clock-cells = <1>; - }; - - cmu-dmc: clock-controller@105C0000 { - compatible = "samsung,exynos4415-cmu-dmc"; - reg = <0x105C0000 0x3000>; - #clock-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/clock/hi3660-clock.txt b/Documentation/devicetree/bindings/clock/hi3660-clock.txt new file mode 100644 index 000000000000..cc9b86c35758 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/hi3660-clock.txt @@ -0,0 +1,42 @@ +* Hisilicon Hi3660 Clock Controller + +The Hi3660 clock controller generates and supplies clock to various +controllers within the Hi3660 SoC. + +Required Properties: + +- compatible: the compatible should be one of the following strings to + indicate the clock controller functionality. + + - "hisilicon,hi3660-crgctrl" + - "hisilicon,hi3660-pctrl" + - "hisilicon,hi3660-pmuctrl" + - "hisilicon,hi3660-sctrl" + - "hisilicon,hi3660-iomcu" + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + +All these identifier could be found in <dt-bindings/clock/hi3660-clock.h>. + +Examples: + crg_ctrl: clock-controller@fff35000 { + compatible = "hisilicon,hi3660-crgctrl", "syscon"; + reg = <0x0 0xfff35000 0x0 0x1000>; + #clock-cells = <1>; + }; + + uart0: serial@fdf02000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf02000 0x0 0x1000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>, + <&crg_ctrl HI3660_PCLK>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt new file mode 100644 index 000000000000..87e9c47a89a3 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt @@ -0,0 +1,65 @@ +Binding for IDT VersaClock5 programmable i2c clock generator. + +The IDT VersaClock5 are programmable i2c clock generators providing +from 3 to 12 output clocks. + +==I2C device node== + +Required properties: +- compatible: shall be one of "idt,5p49v5923" , "idt,5p49v5933". +- reg: i2c device address, shall be 0x68 or 0x6a. +- #clock-cells: from common clock binding; shall be set to 1. +- clocks: from common clock binding; list of parent clock handles, + - 5p49v5923: (required) either or both of XTAL or CLKIN + reference clock. + - 5p49v5933: (optional) property not present (internal + Xtal used) or CLKIN reference + clock. +- clock-names: from common clock binding; clock input names, can be + - 5p49v5923: (required) either or both of "xin", "clkin". + - 5p49v5933: (optional) property not present or "clkin". + +==Mapping between clock specifier and physical pins== + +When referencing the provided clock in the DT using phandle and +clock specifier, the following mapping applies: + +5P49V5923: + 0 -- OUT0_SEL_I2CB + 1 -- OUT1 + 2 -- OUT2 + +5P49V5933: + 0 -- OUT0_SEL_I2CB + 1 -- OUT1 + 2 -- OUT4 + +==Example== + +/* 25MHz reference crystal */ +ref25: ref25m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; +}; + +i2c-master-node { + + /* IDT 5P49V5923 i2c clock generator */ + vc5: clock-generator@6a { + compatible = "idt,5p49v5923"; + reg = <0x6a>; + #clock-cells = <1>; + + /* Connect XIN input to 25MHz reference */ + clocks = <&ref25m>; + clock-names = "xin"; + }; +}; + +/* Consumer referencing the 5P49V5923 pin OUT1 */ +consumer { + ... + clocks = <&vc5 1>; + ... +} diff --git a/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt index 520562a7dc2a..c7b4e3a6b2c6 100644 --- a/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt +++ b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt @@ -7,6 +7,7 @@ Required properties: - compatible : must be "marvell,armada-370-corediv-clock", "marvell,armada-375-corediv-clock", "marvell,armada-380-corediv-clock", + "marvell,mv98dx3236-corediv-clock", - reg : must be the register address of Core Divider control register - #clock-cells : from common clock binding; shall be set to 1 diff --git a/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt index 99c214660bdc..7f28506eaee7 100644 --- a/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt +++ b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt @@ -3,6 +3,7 @@ Device Tree Clock bindings for cpu clock of Marvell EBU platforms Required properties: - compatible : shall be one of the following: "marvell,armada-xp-cpu-clock" - cpu clocks for Armada XP + "marvell,mv98dx3236-cpu-clock" - cpu clocks for 98DX3236 SoC - reg : Address and length of the clock complex register set, followed by address and length of the PMU DFS registers - #clock-cells : should be set to 1. diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt index cb8542d910b3..5142efc8099d 100644 --- a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt +++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt @@ -117,7 +117,7 @@ ID Clock Peripheral 25 tdm Time Division Mplx 28 xor1 XOR DMA 1 29 sata1lnk -30 sata1 SATA Host 0 +30 sata1 SATA Host 1 The following is a list of provided IDs for Dove: ID Clock Peripheral diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt index 87d3714b956a..a7235e9e1c97 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt @@ -11,6 +11,7 @@ Required properties : compatible "qcom,rpmcc" should be also included. "qcom,rpmcc-msm8916", "qcom,rpmcc" + "qcom,rpmcc-msm8974", "qcom,rpmcc" "qcom,rpmcc-apq8064", "qcom,rpmcc" - #clock-cells : shall contain 1 diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt index df9cb5ac5f72..aa3526f229a7 100644 --- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt +++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt @@ -31,6 +31,7 @@ Required properties: * "fsl,t4240-clockgen" * "fsl,b4420-clockgen" * "fsl,b4860-clockgen" + * "fsl,ls1012a-clockgen" * "fsl,ls1021a-clockgen" * "fsl,ls1043a-clockgen" * "fsl,ls1046a-clockgen" diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt index c46919412953..f4f944d81308 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt @@ -42,6 +42,10 @@ Required Properties: Domain bindings in Documentation/devicetree/bindings/power/power_domain.txt. + - #reset-cells: Must be 1 + - The single reset specifier cell must be the module number, as defined + in the datasheet. + Examples -------- @@ -55,6 +59,7 @@ Examples clock-names = "extal", "extalr"; #clock-cells = <2>; #power-domain-cells = <0>; + #reset-cells = <1>; }; @@ -69,5 +74,6 @@ Examples dmas = <&dmac1 0x13>, <&dmac1 0x12>; dma-names = "tx", "rx"; power-domains = <&cpg>; + resets = <&cpg 310>; status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt new file mode 100644 index 000000000000..e71c675ba5da --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt @@ -0,0 +1,57 @@ +* Rockchip RK3328 Clock and Reset Unit + +The RK3328 clock controller generates and supplies clock to various +controllers within the SoC and also implements a reset controller for SoC +peripherals. + +Required Properties: + +- compatible: should be "rockchip,rk3328-cru" +- reg: physical base address of the controller and length of memory mapped + region. +- #clock-cells: should be 1. +- #reset-cells: should be 1. + +Optional Properties: + +- rockchip,grf: phandle to the syscon managing the "general register files" + If missing pll rates are not changeable, due to the missing pll lock status. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. All available clocks are defined as +preprocessor macros in the dt-bindings/clock/rk3328-cru.h headers and can be +used in device tree sources. Similar macros exist for the reset sources in +these files. + +External clocks: + +There are several clocks that are generated outside the SoC. It is expected +that they are defined using standard clock bindings with following +clock-output-names: + - "xin24m" - crystal input - required, + - "clkin_i2s" - external I2S clock - optional, + - "gmac_clkin" - external GMAC clock - optional + - "phy_50m_out" - output clock of the pll in the mac phy + +Example: Clock controller node: + + cru: clock-controller@ff440000 { + compatible = "rockchip,rk3328-cru"; + reg = <0x0 0xff440000 0x0 0x1000>; + rockchip,grf = <&grf>; + + #clock-cells = <1>; + #reset-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller: + + uart0: serial@ff120000 { + compatible = "snps,dw-apb-uart"; + reg = <0xff120000 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&cru SCLK_UART0>; + }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt index 3888dd33fcbd..3bc56fae90ac 100644 --- a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt @@ -13,6 +13,12 @@ Required Properties: - #clock-cells: should be 1. - #reset-cells: should be 1. +Optional Properties: + +- rockchip,grf: phandle to the syscon managing the "general register files". + It is used for GRF muxes, if missing any muxes present in the GRF will not + be available. + Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. All available clocks are defined as preprocessor macros in the dt-bindings/clock/rk3399-cru.h headers and can be diff --git a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt index 0532d815dae3..b240121d2ac9 100644 --- a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt +++ b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt @@ -10,6 +10,7 @@ Required properties: - compatible: Should be: "st,stm32f42xx-rcc" "st,stm32f469-rcc" + "st,stm32f746-rcc" - reg: should be register base and length as documented in the datasheet - #reset-cells: 1, see below @@ -17,6 +18,9 @@ Required properties: property, containing a phandle to the clock device node, an index selecting between gated clocks and other clocks and an index specifying the clock to use. +- clocks: External oscillator clock phandle + - high speed external clock signal (HSE) + - external I2S clock (I2S_CKIN) Example: @@ -25,6 +29,7 @@ Example: #clock-cells = <2> compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; reg = <0x40023800 0x400>; + clocks = <&clk_hse>, <&clk_i2s_ckin>; }; Specifying gated clocks @@ -66,6 +71,38 @@ The secondary index is bound with the following magic numbers: 0 SYSTICK 1 FCLK + 2 CLK_LSI (low-power clock source) + 3 CLK_LSE (generated from a 32.768 kHz low-speed external + crystal or ceramic resonator) + 4 CLK_HSE_RTC (HSE division factor for RTC clock) + 5 CLK_RTC (real-time clock) + 6 PLL_VCO_I2S (vco frequency of I2S pll) + 7 PLL_VCO_SAI (vco frequency of SAI pll) + 8 CLK_LCD (LCD-TFT) + 9 CLK_I2S (I2S clocks) + 10 CLK_SAI1 (audio clocks) + 11 CLK_SAI2 + 12 CLK_I2SQ_PDIV (post divisor of pll i2s q divisor) + 13 CLK_SAIQ_PDIV (post divisor of pll sai q divisor) + + 14 CLK_HSI (Internal ocscillator clock) + 15 CLK_SYSCLK (System Clock) + 16 CLK_HDMI_CEC (HDMI-CEC clock) + 17 CLK_SPDIF (SPDIF-Rx clock) + 18 CLK_USART1 (U(s)arts clocks) + 19 CLK_USART2 + 20 CLK_USART3 + 21 CLK_UART4 + 22 CLK_UART5 + 23 CLK_USART6 + 24 CLK_UART7 + 25 CLK_UART8 + 26 CLK_I2C1 (I2S clocks) + 27 CLK_I2C2 + 28 CLK_I2C3 + 29 CLK_I2C4 + 30 CLK_LPTIMER (LPTimer1 clock) +) Example: diff --git a/Documentation/devicetree/bindings/clock/stericsson,abx500.txt b/Documentation/devicetree/bindings/clock/stericsson,abx500.txt new file mode 100644 index 000000000000..dbaa886b223e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/stericsson,abx500.txt @@ -0,0 +1,20 @@ +Clock bindings for ST-Ericsson ABx500 clocks + +Required properties : +- compatible : shall contain the following: + "stericsson,ab8500-clk" +- #clock-cells should be <1> + +The ABx500 clocks need to be placed as a subnode of an AB8500 +device node, see mfd/ab8500.txt + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/ste-ab8500.h header and can be used in device +tree sources. + +Example: + +clock-controller { + compatible = "stericsson,ab8500-clk"; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/clock/sun9i-de.txt b/Documentation/devicetree/bindings/clock/sun9i-de.txt new file mode 100644 index 000000000000..fb18f327b97a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sun9i-de.txt @@ -0,0 +1,28 @@ +Allwinner A80 Display Engine Clock Control Binding +-------------------------------------------------- + +Required properties : +- compatible: must contain one of the following compatibles: + - "allwinner,sun9i-a80-de-clks" + +- reg: Must contain the registers base address and length +- clocks: phandle to the clocks feeding the display engine subsystem. + Three are needed: + - "mod": the display engine module clock + - "dram": the DRAM bus clock for the system + - "bus": the bus clock for the whole display engine subsystem +- clock-names: Must contain the clock names described just above +- resets: phandle to the reset control for the display engine subsystem. +- #clock-cells : must contain 1 +- #reset-cells : must contain 1 + +Example: +de_clocks: clock@3000000 { + compatible = "allwinner,sun9i-a80-de-clks"; + reg = <0x03000000 0x30>; + clocks = <&ccu CLK_DE>, <&ccu CLK_SDRAM>, <&ccu CLK_BUS_DE>; + clock-names = "mod", "dram", "bus"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; + #reset-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/clock/sun9i-usb.txt b/Documentation/devicetree/bindings/clock/sun9i-usb.txt new file mode 100644 index 000000000000..3564bd4f2a20 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sun9i-usb.txt @@ -0,0 +1,24 @@ +Allwinner A80 USB Clock Control Binding +--------------------------------------- + +Required properties : +- compatible: must contain one of the following compatibles: + - "allwinner,sun9i-a80-usb-clocks" + +- reg: Must contain the registers base address and length +- clocks: phandle to the clocks feeding the USB subsystem. Two are needed: + - "bus": the bus clock for the whole USB subsystem + - "hosc": the high frequency oscillator (usually at 24MHz) +- clock-names: Must contain the clock names described just above +- #clock-cells : must contain 1 +- #reset-cells : must contain 1 + +Example: +usb_clocks: clock@a08000 { + compatible = "allwinner,sun9i-a80-usb-clks"; + reg = <0x00a08000 0x8>; + clocks = <&ccu CLK_BUS_USB>, <&osc24M>; + clock-names = "bus", "hosc"; + #clock-cells = <1>; + #reset-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt index 74d44a4273f2..bae5668cf427 100644 --- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt @@ -7,6 +7,8 @@ Required properties : - "allwinner,sun8i-a23-ccu" - "allwinner,sun8i-a33-ccu" - "allwinner,sun8i-h3-ccu" + - "allwinner,sun8i-v3s-ccu" + - "allwinner,sun9i-a80-ccu" - "allwinner,sun50i-a64-ccu" - reg: Must contain the registers base address and length diff --git a/Documentation/devicetree/bindings/clock/ti,cdce925.txt b/Documentation/devicetree/bindings/clock/ti,cdce925.txt index 4c7669ad681b..0d01f2d5cc36 100644 --- a/Documentation/devicetree/bindings/clock/ti,cdce925.txt +++ b/Documentation/devicetree/bindings/clock/ti,cdce925.txt @@ -1,15 +1,22 @@ -Binding for TO CDCE925 programmable I2C clock synthesizers. +Binding for TI CDCE913/925/937/949 programmable I2C clock synthesizers. Reference This binding uses the common clock binding[1]. [1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] http://www.ti.com/product/cdce925 +[2] http://www.ti.com/product/cdce913 +[3] http://www.ti.com/product/cdce925 +[4] http://www.ti.com/product/cdce937 +[5] http://www.ti.com/product/cdce949 The driver provides clock sources for each output Y1 through Y5. Required properties: - - compatible: Shall be "ti,cdce925" + - compatible: Shall be one of the following: + - "ti,cdce913": 1-PLL, 3 Outputs + - "ti,cdce925": 2-PLL, 5 Outputs + - "ti,cdce937": 3-PLL, 7 Outputs + - "ti,cdce949": 4-PLL, 9 Outputs - reg: I2C device address. - clocks: Points to a fixed parent clock that provides the input frequency. - #clock-cells: From common clock bindings: Shall be 1. @@ -18,7 +25,7 @@ Optional properties: - xtal-load-pf: Crystal load-capacitor value to fine-tune performance on a board, or to compensate for external influences. -For both PLL1 and PLL2 an optional child node can be used to specify spread +For all PLL1, PLL2, ... an optional child node can be used to specify spread spectrum clocking parameters for a board. - spread-spectrum: SSC mode as defined in the data sheet. - spread-spectrum-center: Use "centered" mode instead of "max" mode. When diff --git a/Documentation/devicetree/bindings/clock/zx296718-clk.txt b/Documentation/devicetree/bindings/clock/zx296718-clk.txt index 8c18b7b237bf..4ad703808407 100644 --- a/Documentation/devicetree/bindings/clock/zx296718-clk.txt +++ b/Documentation/devicetree/bindings/clock/zx296718-clk.txt @@ -13,6 +13,9 @@ Required properties: "zte,zx296718-lsp1crm": zx296718 device level clock selection and gating + "zte,zx296718-audiocrm": + zx296718 audio clock selection, divider and gating + - reg: Address and length of the register set The clock consumer should specify the desired clock by having the clock diff --git a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt new file mode 100644 index 000000000000..ba0e15ad5bd9 --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt @@ -0,0 +1,128 @@ +TI CPUFreq and OPP bindings +================================ + +Certain TI SoCs, like those in the am335x, am437x, am57xx, and dra7xx +families support different OPPs depending on the silicon variant in use. +The ti-cpufreq driver can use revision and an efuse value from the SoC to +provide the OPP framework with supported hardware information. This is +used to determine which OPPs from the operating-points-v2 table get enabled +when it is parsed by the OPP framework. + +Required properties: +-------------------- +In 'cpus' nodes: +- operating-points-v2: Phandle to the operating-points-v2 table to use. + +In 'operating-points-v2' table: +- compatible: Should be + - 'operating-points-v2-ti-cpu' for am335x, am43xx, and dra7xx/am57xx SoCs +- syscon: A phandle pointing to a syscon node representing the control module + register space of the SoC. + +Optional properties: +-------------------- +For each opp entry in 'operating-points-v2' table: +- opp-supported-hw: Two bitfields indicating: + 1. Which revision of the SoC the OPP is supported by + 2. Which eFuse bits indicate this OPP is available + + A bitwise AND is performed against these values and if any bit + matches, the OPP gets enabled. + +Example: +-------- + +/* From arch/arm/boot/dts/am33xx.dtsi */ +cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + compatible = "arm,cortex-a8"; + device_type = "cpu"; + reg = <0>; + + operating-points-v2 = <&cpu0_opp_table>; + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + }; +}; + +/* + * cpu0 has different OPPs depending on SoC revision and some on revisions + * 0x2 and 0x4 have eFuse bits that indicate if they are available or not + */ +cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + + /* + * The three following nodes are marked with opp-suspend + * because they can not be enabled simultaneously on a + * single SoC. + */ + opp50@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <950000 931000 969000>; + opp-supported-hw = <0x06 0x0010>; + opp-suspend; + }; + + opp100@275000000 { + opp-hz = /bits/ 64 <275000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x01 0x00FF>; + opp-suspend; + }; + + opp100@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0020>; + opp-suspend; + }; + + opp100@500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + opp100@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0040>; + }; + + opp120@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1200000 1176000 1224000>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + opp120@720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1200000 1176000 1224000>; + opp-supported-hw = <0x06 0x0080>; + }; + + oppturbo@720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1260000 1234800 1285200>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + oppturbo@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1260000 1234800 1285200>; + opp-supported-hw = <0x06 0x0100>; + }; + + oppnitro@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1325000 1298500 1351500>; + opp-supported-hw = <0x04 0x0200>; + }; +}; diff --git a/Documentation/devicetree/bindings/crypto/brcm,spu-crypto.txt b/Documentation/devicetree/bindings/crypto/brcm,spu-crypto.txt new file mode 100644 index 000000000000..29b6007568eb --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/brcm,spu-crypto.txt @@ -0,0 +1,22 @@ +The Broadcom Secure Processing Unit (SPU) hardware supports symmetric +cryptographic offload for Broadcom SoCs. A SoC may have multiple SPU hardware +blocks. + +Required properties: +- compatible: Should be one of the following: + brcm,spum-crypto - for devices with SPU-M hardware + brcm,spu2-crypto - for devices with SPU2 hardware + brcm,spu2-v2-crypto - for devices with enhanced SPU2 hardware features like SHA3 + and Rabin Fingerprint support + brcm,spum-nsp-crypto - for the Northstar Plus variant of the SPU-M hardware + +- reg: Should contain SPU registers location and length. +- mboxes: The mailbox channel to be used to communicate with the SPU. + Mailbox channels correspond to DMA rings on the device. + +Example: + crypto@612d0000 { + compatible = "brcm,spum-crypto"; + reg = <0 0x612d0000 0 0x900>; + mboxes = <&pdc0 0>; + }; diff --git a/Documentation/devicetree/bindings/crypto/mediatek-crypto.txt b/Documentation/devicetree/bindings/crypto/mediatek-crypto.txt new file mode 100644 index 000000000000..c204725e5873 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/mediatek-crypto.txt @@ -0,0 +1,27 @@ +MediaTek cryptographic accelerators + +Required properties: +- compatible: Should be "mediatek,eip97-crypto" +- reg: Address and length of the register set for the device +- interrupts: Should contain the five crypto engines interrupts in numeric + order. These are global system and four descriptor rings. +- clocks: the clock used by the core +- clock-names: the names of the clock listed in the clocks property. These are + "ethif", "cryp" +- power-domains: Must contain a reference to the PM domain. + + +Example: + crypto: crypto@1b240000 { + compatible = "mediatek,eip97-crypto"; + reg = <0 0x1b240000 0 0x20000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_ETHIF_SEL>, + <ðsys CLK_ETHSYS_CRYPTO>; + clock-names = "ethif","cryp"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; + }; diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt index d3ec8e676b6b..d085ef90d27c 100644 --- a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt +++ b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt @@ -123,6 +123,20 @@ Detailed correlation between sub-blocks and power line according to Exynos SoC: |--- FSYS |--- FSYS2 +- In case of Exynos5433, there is VDD_INT power line as following: + VDD_INT |--- G2D (parent device) + |--- MSCL + |--- GSCL + |--- JPEG + |--- MFC + |--- HEVC + |--- BUS0 + |--- BUS1 + |--- BUS2 + |--- PERIS (Fixed clock rate) + |--- PERIC (Fixed clock rate) + |--- FSYS (Fixed clock rate) + Example1: Show the AXI buses of Exynos3250 SoC. Exynos3250 divides the buses to power line (regulator). The MIF (Memory Interface) AXI bus is used to diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.txt b/Documentation/devicetree/bindings/display/arm,pl11x.txt index 3e3039a8a253..ef89ab46b2c9 100644 --- a/Documentation/devicetree/bindings/display/arm,pl11x.txt +++ b/Documentation/devicetree/bindings/display/arm,pl11x.txt @@ -22,7 +22,7 @@ Required properties: - clocks: contains phandle and clock specifier pairs for the entries in the clock-names property. See - Documentation/devicetree/binding/clock/clock-bindings.txt + Documentation/devicetree/bindings/clock/clock-bindings.txt Optional properties: diff --git a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt index e2768703ac2b..34c7fddcea39 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt +++ b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt @@ -56,6 +56,18 @@ Required properties for V3D: - interrupts: The interrupt number See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt +Required properties for DSI: +- compatible: Should be "brcm,bcm2835-dsi0" or "brcm,bcm2835-dsi1" +- reg: Physical base address and length of the DSI block's registers +- interrupts: The interrupt number + See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt +- clocks: a) phy: The DSI PLL clock feeding the DSI analog PHY + b) escape: The DSI ESC clock from CPRMAN + c) pixel: The DSI pixel clock from CPRMAN +- clock-output-names: + The 3 clocks output from the DSI analog PHY: dsi[01]_byte, + dsi[01]_ddr2, and dsi[01]_ddr + [1] Documentation/devicetree/bindings/media/video-interfaces.txt Example: @@ -99,6 +111,29 @@ dpi: dpi@7e208000 { }; }; +dsi1: dsi@7e700000 { + compatible = "brcm,bcm2835-dsi1"; + reg = <0x7e700000 0x8c>; + interrupts = <2 12>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + clocks = <&clocks BCM2835_PLLD_DSI1>, + <&clocks BCM2835_CLOCK_DSI1E>, + <&clocks BCM2835_CLOCK_DSI1P>; + clock-names = "phy", "escape", "pixel"; + + clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr"; + + pitouchscreen: panel@0 { + compatible = "raspberrypi,touchscreen"; + reg = <0>; + + <...> + }; +}; + vec: vec@7e806000 { compatible = "brcm,bcm2835-vec"; reg = <0x7e806000 0x1000>; diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt index 6532a59c9b43..00ea670b8c4d 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt @@ -38,10 +38,22 @@ The following input format properties are required except in "rgb 1x" and - adi,input-justification: The input bit justification ("left", "evenly", "right"). +- avdd-supply: A 1.8V supply that powers up the AVDD pin on the chip. +- dvdd-supply: A 1.8V supply that powers up the DVDD pin on the chip. +- pvdd-supply: A 1.8V supply that powers up the PVDD pin on the chip. +- dvdd-3v-supply: A 3.3V supply that powers up the pin called DVDD_3V + on the chip. +- bgvdd-supply: A 1.8V supply that powers up the BGVDD pin. This is + needed only for ADV7511. + The following properties are required for ADV7533: - adi,dsi-lanes: Number of DSI data lanes connected to the DSI host. It should be one of 1, 2, 3 or 4. +- a2vdd-supply: 1.8V supply that powers up the A2VDD pin on the chip. +- v3p3-supply: A 3.3V supply that powers up the V3P3 pin on the chip. +- v1p2-supply: A supply that powers up the V1P2 pin on the chip. It can be + either 1.2V or 1.8V. Optional properties: diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt index 4a0f4f7682ad..0c7473dd0e51 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt +++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt @@ -33,7 +33,7 @@ Optional properties for dp-controller: in Documentation/devicetree/bindings/media/video-interfaces.txt, please refer to the SoC specific binding document: * Documentation/devicetree/bindings/display/exynos/exynos_dp.txt - * Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt + * Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt [1]: Documentation/devicetree/bindings/media/video-interfaces.txt ------------------------------------------------------------------------------- diff --git a/Documentation/devicetree/bindings/video/bridge/anx7814.txt b/Documentation/devicetree/bindings/display/bridge/anx7814.txt index b2a22c28c9b3..b2a22c28c9b3 100644 --- a/Documentation/devicetree/bindings/video/bridge/anx7814.txt +++ b/Documentation/devicetree/bindings/display/bridge/anx7814.txt diff --git a/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt b/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt index 5e9a84d6e5f1..33bf981fbe33 100644 --- a/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt +++ b/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt @@ -1,52 +1,33 @@ -DesignWare HDMI bridge bindings - -Required properties: -- compatible: platform specific such as: - * "snps,dw-hdmi-tx" - * "fsl,imx6q-hdmi" - * "fsl,imx6dl-hdmi" - * "rockchip,rk3288-dw-hdmi" -- reg: Physical base address and length of the controller's registers. -- interrupts: The HDMI interrupt number -- clocks, clock-names : must have the phandles to the HDMI iahb and isfr clocks, - as described in Documentation/devicetree/bindings/clock/clock-bindings.txt, - the clocks are soc specific, the clock-names should be "iahb", "isfr" --port@[X]: SoC specific port nodes with endpoint definitions as defined - in Documentation/devicetree/bindings/media/video-interfaces.txt, - please refer to the SoC specific binding document: - * Documentation/devicetree/bindings/display/imx/hdmi.txt - * Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt - -Optional properties -- reg-io-width: the width of the reg:1,4, default set to 1 if not present -- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing, - if the property is omitted, a functionally reduced I2C bus - controller on DW HDMI is probed -- clocks, clock-names: phandle to the HDMI CEC clock, name should be "cec" - -Example: - hdmi: hdmi@0120000 { - compatible = "fsl,imx6q-hdmi"; - reg = <0x00120000 0x9000>; - interrupts = <0 115 0x04>; - gpr = <&gpr>; - clocks = <&clks 123>, <&clks 124>; - clock-names = "iahb", "isfr"; - ddc-i2c-bus = <&i2c2>; - - port@0 { - reg = <0>; - - hdmi_mux_0: endpoint { - remote-endpoint = <&ipu1_di0_hdmi>; - }; - }; - - port@1 { - reg = <1>; - - hdmi_mux_1: endpoint { - remote-endpoint = <&ipu1_di1_hdmi>; - }; - }; - }; +Synopsys DesignWare HDMI TX Encoder +=================================== + +This document defines device tree properties for the Synopsys DesignWare HDMI +TX Encoder (DWC HDMI TX). It doesn't constitue a device tree binding +specification by itself but is meant to be referenced by platform-specific +device tree bindings. + +When referenced from platform device tree bindings the properties defined in +this document are defined as follows. The platform device tree bindings are +responsible for defining whether each property is required or optional. + +- reg: Memory mapped base address and length of the DWC HDMI TX registers. + +- reg-io-width: Width of the registers specified by the reg property. The + value is expressed in bytes and must be equal to 1 or 4 if specified. The + register width defaults to 1 if the property is not present. + +- interrupts: Reference to the DWC HDMI TX interrupt. + +- clocks: References to all the clocks specified in the clock-names property + as specified in Documentation/devicetree/bindings/clock/clock-bindings.txt. + +- clock-names: The DWC HDMI TX uses the following clocks. + + - "iahb" is the bus clock for either AHB and APB (mandatory). + - "isfr" is the internal register configuration clock (mandatory). + - "cec" is the HDMI CEC controller main clock (optional). + +- ports: The connectivity of the DWC HDMI TX with the rest of the system is + expressed in using ports as specified in the device graph bindings defined + in Documentation/devicetree/bindings/graph.txt. The numbering of the ports + is platform-specific. diff --git a/Documentation/devicetree/bindings/video/bridge/sil-sii8620.txt b/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt index 9409d9c6a260..9409d9c6a260 100644 --- a/Documentation/devicetree/bindings/video/bridge/sil-sii8620.txt +++ b/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt new file mode 100644 index 000000000000..6ec1a880ac18 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt @@ -0,0 +1,46 @@ +THS8135 Video DAC +----------------- + +This is the binding for Texas Instruments THS8135 Video DAC bridge. + +Required properties: + +- compatible: Must be "ti,ths8135" + +Required nodes: + +This device has two video ports. Their connections are modelled using the OF +graph bindings specified in Documentation/devicetree/bindings/graph.txt. + +- Video port 0 for RGB input +- Video port 1 for VGA output + +Example +------- + +vga-bridge { + compatible = "ti,ths8135"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vga_bridge_in: endpoint { + remote-endpoint = <&lcdc_out_vga>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt b/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt index e9c65746e2f1..b0e506610400 100644 --- a/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt +++ b/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt @@ -6,7 +6,7 @@ Required properties: location and size of the framebuffer memory. - clocks : phandle + clock specifier pair of the FB reference clock. - display : phandle to a display node as described in - Documentation/devicetree/bindings/display/display-timing.txt. + Documentation/devicetree/bindings/display/panel/display-timing.txt. Additionally, the display node has to define properties: - bits-per-pixel: Bits per pixel. - ac-prescale : LCD AC bias frequency. This frequency is the required diff --git a/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt index 3938caacf11c..9e2e7f6f7609 100644 --- a/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt +++ b/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt @@ -33,12 +33,12 @@ Required properties: - i80-if-timings: timing configuration for lcd i80 interface support. Optional Properties: -- samsung,power-domain: a phandle to DECON power domain node. +- power-domains: a phandle to DECON power domain node. - display-timings: timing settings for DECON, as described in document [1]. Can be used in case timings cannot be provided otherwise or to override timings provided by the panel. -[1]: Documentation/devicetree/bindings/display/display-timing.txt +[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt Example: diff --git a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt index c7c6b9af87ac..18645e0228b0 100644 --- a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt +++ b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt @@ -83,7 +83,7 @@ in [2]. The following are properties specific to those nodes: 3 - for parallel output, 4 - for write-back interface -[1]: Documentation/devicetree/bindings/display/display-timing.txt +[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt [2]: Documentation/devicetree/bindings/media/video-interfaces.txt Example: diff --git a/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt b/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt index 38dc9d60eef8..305a0e72a900 100644 --- a/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt +++ b/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt @@ -16,7 +16,7 @@ Required properties: "clk_ade_core" for the ADE core clock. "clk_codec_jpeg" for the media NOC QoS clock, which use the same clock with jpeg codec. - "clk_ade_pix" for the ADE pixel clok. + "clk_ade_pix" for the ADE pixel clock. - assigned-clocks: Should contain "clk_ade_core" and "clk_codec_jpeg" clocks' phandle + clock-specifier pairs. - assigned-clock-rates: clock rates, one for each entry in assigned-clocks. diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt index 00d5f8ea7ec6..7a5c0e204c8e 100644 --- a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt @@ -9,7 +9,7 @@ Required properties: Required nodes: - display: Phandle to a display node as described in - Documentation/devicetree/bindings/display/display-timing.txt + Documentation/devicetree/bindings/display/panel/display-timing.txt Additional, the display node has to define properties: - bits-per-pixel: Bits per pixel - fsl,pcr: LCDC PCR value diff --git a/Documentation/devicetree/bindings/display/imx/hdmi.txt b/Documentation/devicetree/bindings/display/imx/hdmi.txt index 1b756cf9afb0..66a8f86e5d12 100644 --- a/Documentation/devicetree/bindings/display/imx/hdmi.txt +++ b/Documentation/devicetree/bindings/display/imx/hdmi.txt @@ -1,29 +1,36 @@ -Device-Tree bindings for HDMI Transmitter +Freescale i.MX6 DWC HDMI TX Encoder +=================================== -HDMI Transmitter -================ +The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP +with a companion PHY IP. + +These DT bindings follow the Synopsys DWC HDMI TX bindings defined in +Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the +following device-specific properties. -The HDMI Transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP -with accompanying PHY IP. Required properties: - - #address-cells : should be <1> - - #size-cells : should be <0> - - compatible : should be "fsl,imx6q-hdmi" or "fsl,imx6dl-hdmi". - - gpr : should be <&gpr>. - The phandle points to the iomuxc-gpr region containing the HDMI - multiplexer control register. - - clocks, clock-names : phandles to the HDMI iahb and isrf clocks, as described - in Documentation/devicetree/bindings/clock/clock-bindings.txt and - Documentation/devicetree/bindings/clock/imx6q-clock.txt. - - port@[0-4]: Up to four port nodes with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt, - corresponding to the four inputs to the HDMI multiplexer. - -Optional properties: - - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing - -example: + +- compatible : Shall be one of "fsl,imx6q-hdmi" or "fsl,imx6dl-hdmi". +- reg: See dw_hdmi.txt. +- interrupts: HDMI interrupt number +- clocks: See dw_hdmi.txt. +- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt. +- ports: See dw_hdmi.txt. The DWC HDMI shall have between one and four ports, + numbered 0 to 3, corresponding to the four inputs of the HDMI multiplexer. + Each port shall have a single endpoint. +- gpr : Shall contain a phandle to the iomuxc-gpr region containing the HDMI + multiplexer control register. + +Optional properties + +- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master + or the functionally-reduced I2C master contained in the DWC HDMI. When + connected to a system I2C master this property contains a phandle to that + I2C master controller. + + +Example: gpr: iomuxc-gpr@020e0000 { /* ... */ diff --git a/Documentation/devicetree/bindings/display/imx/ldb.txt b/Documentation/devicetree/bindings/display/imx/ldb.txt index a407462c885e..38c637fa39dd 100644 --- a/Documentation/devicetree/bindings/display/imx/ldb.txt +++ b/Documentation/devicetree/bindings/display/imx/ldb.txt @@ -64,7 +64,7 @@ Required properties: Optional properties (required if display-timings are used): - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing - display-timings : A node that describes the display timings as defined in - Documentation/devicetree/bindings/display/display-timing.txt. + Documentation/devicetree/bindings/display/panel/display-timing.txt. - fsl,data-mapping : should be "spwg" or "jeida" This describes how the color bits are laid out in the serialized LVDS signal. diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt index db6e77edbea8..708f5664a316 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt @@ -55,7 +55,7 @@ Required properties (DMA function blocks): "mediatek,<chip>-disp-rdma" "mediatek,<chip>-disp-wdma" - larb: Should contain a phandle pointing to the local arbiter device as defined - in Documentation/devicetree/bindings/soc/mediatek/mediatek,smi-larb.txt + in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt - iommus: Should point to the respective IOMMU block with master port as argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt for details. diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt index 6b1cab17f52d..fa00e62e1cf6 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi.txt +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt @@ -108,7 +108,7 @@ Optional properties: - qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY regulator is wanted. -[1] Documentation/devicetree/bindings/clocks/clock-bindings.txt +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt [2] Documentation/devicetree/bindings/graph.txt [3] Documentation/devicetree/bindings/media/video-interfaces.txt [4] Documentation/devicetree/bindings/display/panel/ diff --git a/Documentation/devicetree/bindings/display/msm/edp.txt b/Documentation/devicetree/bindings/display/msm/edp.txt index 3a20f6ea5898..e63032be5401 100644 --- a/Documentation/devicetree/bindings/display/msm/edp.txt +++ b/Documentation/devicetree/bindings/display/msm/edp.txt @@ -10,7 +10,7 @@ Required properties: - interrupts: The interrupt signal from the eDP block. - power-domains: Should be <&mmcc MDSS_GDSC>. - clocks: device clocks - See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details. + See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. - clock-names: the following clocks are required: * "core_clk" * "iface_clk" diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt index 67d0a58dbb77..43fac0fe09bb 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.txt +++ b/Documentation/devicetree/bindings/display/msm/gpu.txt @@ -1,23 +1,19 @@ Qualcomm adreno/snapdragon GPU Required properties: -- compatible: "qcom,adreno-3xx" +- compatible: "qcom,adreno-XYZ.W", "qcom,adreno" + for example: "qcom,adreno-306.0", "qcom,adreno" + Note that you need to list the less specific "qcom,adreno" (since this + is what the device is matched on), in addition to the more specific + with the chip-id. - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt signal from the gpu. - clocks: device clocks See ../clocks/clock-bindings.txt for details. - clock-names: the following clocks are required: - * "core_clk" - * "iface_clk" - * "mem_iface_clk" -- qcom,chipid: gpu chip-id. Note this may become optional for future - devices if we can reliably read the chipid from hw -- qcom,gpu-pwrlevels: list of operating points - - compatible: "qcom,gpu-pwrlevels" - - for each qcom,gpu-pwrlevel: - - qcom,gpu-freq: requested gpu clock speed - - NOTE: downstream android driver defines additional parameters to - configure memory bandwidth scaling per OPP. + * "core" + * "iface" + * "mem_iface" Example: @@ -25,28 +21,18 @@ Example: ... gpu: qcom,kgsl-3d0@4300000 { - compatible = "qcom,adreno-3xx"; + compatible = "qcom,adreno-320.2", "qcom,adreno"; reg = <0x04300000 0x20000>; reg-names = "kgsl_3d0_reg_memory"; interrupts = <GIC_SPI 80 0>; interrupt-names = "kgsl_3d0_irq"; clock-names = - "core_clk", - "iface_clk", - "mem_iface_clk"; + "core", + "iface", + "mem_iface"; clocks = <&mmcc GFX3D_CLK>, <&mmcc GFX3D_AHB_CLK>, <&mmcc MMSS_IMEM_AHB_CLK>; - qcom,chipid = <0x03020100>; - qcom,gpu-pwrlevels { - compatible = "qcom,gpu-pwrlevels"; - qcom,gpu-pwrlevel@0 { - qcom,gpu-freq = <450000000>; - }; - qcom,gpu-pwrlevel@1 { - qcom,gpu-freq = <27000000>; - }; - }; }; }; diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt index 2ad578984fcf..2d306f402d18 100644 --- a/Documentation/devicetree/bindings/display/msm/hdmi.txt +++ b/Documentation/devicetree/bindings/display/msm/hdmi.txt @@ -49,7 +49,7 @@ Required properties: * "hdmi_tx_l4" - power-domains: Should be <&mmcc MDSS_GDSC>. - clocks: device clocks - See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details. + See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. - core-vdda-supply: phandle to vdda regulator device node Example: diff --git a/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt b/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt new file mode 100644 index 000000000000..eed48c3d4875 --- /dev/null +++ b/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt @@ -0,0 +1,27 @@ +Multi-Inno MI0283QT display panel + +Required properties: +- compatible: "multi-inno,mi0283qt". + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified. + +Optional properties: +- dc-gpios: D/C pin. The presence/absence of this GPIO determines + the panel interface mode (IM[3:0] pins): + - present: IM=x110 4-wire 8-bit data serial interface + - absent: IM=x101 3-wire 9-bit data serial interface +- reset-gpios: Reset pin +- power-supply: A regulator node for the supply voltage. +- backlight: phandle of the backlight device attached to the panel +- rotation: panel rotation in degrees counter clockwise (0,90,180,270) + +Example: + mi0283qt@0{ + compatible = "multi-inno,mi0283qt"; + reg = <0>; + spi-max-frequency = <32000000>; + rotation = <90>; + dc-gpios = <&gpio 25 0>; + backlight = <&backlight>; + }; diff --git a/Documentation/devicetree/bindings/display/panel/boe,nv101wxmn51.txt b/Documentation/devicetree/bindings/display/panel/boe,nv101wxmn51.txt new file mode 100644 index 000000000000..b258d6a91ec6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/boe,nv101wxmn51.txt @@ -0,0 +1,7 @@ +BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel + +Required properties: +- compatible: should be "boe,nv101wxmn51" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/netron-dy,e231732.txt b/Documentation/devicetree/bindings/display/panel/netron-dy,e231732.txt new file mode 100644 index 000000000000..c6d06b5eab51 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/netron-dy,e231732.txt @@ -0,0 +1,7 @@ +Netron-DY E231732 7.0" WSVGA TFT LCD panel + +Required properties: +- compatible: should be "netron-dy,e231732" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/panel-dpi.txt b/Documentation/devicetree/bindings/display/panel/panel-dpi.txt index b52ac52757df..d4add13e592d 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-dpi.txt +++ b/Documentation/devicetree/bindings/display/panel/panel-dpi.txt @@ -12,7 +12,7 @@ Optional properties: Required nodes: - "panel-timing" containing video timings - (Documentation/devicetree/bindings/display/display-timing.txt) + (Documentation/devicetree/bindings/display/panel/display-timing.txt) - Video port for DPI input Example diff --git a/Documentation/devicetree/bindings/display/panel/panel.txt b/Documentation/devicetree/bindings/display/panel/panel.txt new file mode 100644 index 000000000000..e2e6867852b8 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel.txt @@ -0,0 +1,4 @@ +Common display properties +------------------------- + +- rotation: Display rotation in degrees counter clockwise (0,90,180,270) diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt index fc595d9b985b..354d4d1df4ff 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt +++ b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt @@ -20,7 +20,7 @@ The device node can contain one 'port' child node with one child 'endpoint' node, according to the bindings defined in [3]. This node should describe panel's video bus. -[1]: Documentation/devicetree/bindings/display/display-timing.txt +[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt [2]: Documentation/devicetree/bindings/spi/spi-bus.txt [3]: Documentation/devicetree/bindings/media/video-interfaces.txt diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt index 25701c81b5e0..9e766c5f86da 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt @@ -21,7 +21,7 @@ The device node can contain one 'port' child node with one child 'endpoint' node, according to the bindings defined in [2]. This node should describe panel's video bus. -[1]: Documentation/devicetree/bindings/display/display-timing.txt +[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt [2]: Documentation/devicetree/bindings/media/video-interfaces.txt Example: diff --git a/Documentation/devicetree/bindings/display/panel/tianma,tm070jdhg30.txt b/Documentation/devicetree/bindings/display/panel/tianma,tm070jdhg30.txt new file mode 100644 index 000000000000..eb9501a82e25 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/tianma,tm070jdhg30.txt @@ -0,0 +1,7 @@ +Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel + +Required properties: +- compatible: should be "tianma,tm070jdhg30" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt index 01cced1c2a18..47665a12786f 100644 --- a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt @@ -35,7 +35,7 @@ Optional property for different chips: Required elements: "grf" For the below properties, please refer to Analogix DP binding document: - * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt + * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt - phys (required) - phy-names (required) - hpd-gpios (optional) diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt index 668091f27674..046076c6b277 100644 --- a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt @@ -1,24 +1,39 @@ -Rockchip specific extensions to the Synopsys Designware HDMI -================================ +Rockchip DWC HDMI TX Encoder +============================ + +The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP +with a companion PHY IP. + +These DT bindings follow the Synopsys DWC HDMI TX bindings defined in +Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the +following device-specific properties. + Required properties: -- compatible: "rockchip,rk3288-dw-hdmi"; -- reg: Physical base address and length of the controller's registers. -- clocks: phandle to hdmi iahb and isfr clocks. -- clock-names: should be "iahb" "isfr" -- rockchip,grf: this soc should set GRF regs to mux vopl/vopb. + +- compatible: Shall contain "rockchip,rk3288-dw-hdmi". +- reg: See dw_hdmi.txt. +- reg-io-width: See dw_hdmi.txt. Shall be 4. - interrupts: HDMI interrupt number -- ports: contain a port node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. For - vopb,set the reg = <0> and set the reg = <1> for vopl. -- reg-io-width: the width of the reg:1,4, the value should be 4 on - rk3288 platform +- clocks: See dw_hdmi.txt. +- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt. +- ports: See dw_hdmi.txt. The DWC HDMI shall have a single port numbered 0 + corresponding to the video input of the controller. The port shall have two + endpoints, numbered 0 and 1, connected respectively to the vopb and vopl. +- rockchip,grf: Shall reference the GRF to mux vopl/vopb. Optional properties -- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing -- clocks, clock-names: phandle to the HDMI CEC clock, name should be "cec" + +- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master + or the functionally-reduced I2C master contained in the DWC HDMI. When + connected to a system I2C master this property contains a phandle to that + I2C master controller. +- clock-names: See dw_hdmi.txt. The "cec" clock is optional. +- clock-names: May contain "cec" as defined in dw_hdmi.txt. + Example: + hdmi: hdmi@ff980000 { compatible = "rockchip,rk3288-dw-hdmi"; reg = <0xff980000 0x20000>; diff --git a/Documentation/devicetree/bindings/display/ssd1307fb.txt b/Documentation/devicetree/bindings/display/ssd1307fb.txt index eb31ed47a283..209d931ef16c 100644 --- a/Documentation/devicetree/bindings/display/ssd1307fb.txt +++ b/Documentation/devicetree/bindings/display/ssd1307fb.txt @@ -8,14 +8,15 @@ Required properties: 0x3c or 0x3d - pwm: Should contain the pwm to use according to the OF device tree PWM specification [0]. Only required for the ssd1307. - - reset-gpios: Should contain the GPIO used to reset the OLED display - solomon,height: Height in pixel of the screen driven by the controller - solomon,width: Width in pixel of the screen driven by the controller - solomon,page-offset: Offset of pages (band of 8 pixels) that the screen is mapped to. Optional properties: - - reset-active-low: Is the reset gpio is active on physical low? + - reset-gpios: The GPIO used to reset the OLED display, if available. See + Documentation/devicetree/bindings/gpio/gpio.txt for details. + - vbat-supply: The supply for VBAT - solomon,segment-no-remap: Display needs normal (non-inverted) data column to segment mapping - solomon,com-seq: Display uses sequential COM pin configuration diff --git a/Documentation/devicetree/bindings/display/tilcdc/panel.txt b/Documentation/devicetree/bindings/display/tilcdc/panel.txt index f20b31cdc59a..808216310ea2 100644 --- a/Documentation/devicetree/bindings/display/tilcdc/panel.txt +++ b/Documentation/devicetree/bindings/display/tilcdc/panel.txt @@ -15,7 +15,7 @@ Required properties: - display-timings: typical videomode of lcd panel. Multiple video modes can be listed if the panel supports multiple timings, but the 'native-mode' should be the preferred/default resolution. Refer to - Documentation/devicetree/bindings/display/display-timing.txt for display + Documentation/devicetree/bindings/display/panel/display-timing.txt for display timing binding details. Optional properties: diff --git a/Documentation/devicetree/bindings/display/zte,vou.txt b/Documentation/devicetree/bindings/display/zte,vou.txt index 740e5bd2e4f7..9c356284232b 100644 --- a/Documentation/devicetree/bindings/display/zte,vou.txt +++ b/Documentation/devicetree/bindings/display/zte,vou.txt @@ -49,6 +49,15 @@ Required properties: "osc_clk" "xclk" +* TV Encoder output device + +Required properties: + - compatible: should be "zte,zx296718-tvenc" + - reg: Physical base address and length of the TVENC device IO region + - zte,tvenc-power-control: the phandle to SYSCTRL block followed by two + integer cells. The first cell is the offset of SYSCTRL register used + to control TV Encoder DAC power, and the second cell is the bit mask. + Example: vou: vou@1440000 { @@ -81,4 +90,10 @@ vou: vou@1440000 { <&topcrm HDMI_XCLK>; clock-names = "osc_cec", "osc_clk", "xclk"; }; + + tvenc: tvenc@2000 { + compatible = "zte,zx296718-tvenc"; + reg = <0x2000 0x1000>; + zte,tvenc-power-control = <&sysctrl 0x170 0x10>; + }; }; diff --git a/Documentation/devicetree/bindings/dma/stm32-dma.txt b/Documentation/devicetree/bindings/dma/stm32-dma.txt index 70cd13f1588a..4408af693d0c 100644 --- a/Documentation/devicetree/bindings/dma/stm32-dma.txt +++ b/Documentation/devicetree/bindings/dma/stm32-dma.txt @@ -40,8 +40,7 @@ Example: DMA clients connected to the STM32 DMA controller must use the format described in the dma.txt file, using a five-cell specifier for each -channel: a phandle plus four integer cells. -The four cells in order are: +channel: a phandle to the DMA controller plus the following four integer cells: 1. The channel id 2. The request line number @@ -61,7 +60,7 @@ The four cells in order are: 0x1: medium 0x2: high 0x3: very high -5. A 32bit mask specifying the DMA FIFO threshold configuration which are device +4. A 32bit mask specifying the DMA FIFO threshold configuration which are device dependent: -bit 0-1: Fifo threshold 0x0: 1/4 full FIFO diff --git a/Documentation/devicetree/bindings/eeprom/eeprom.txt b/Documentation/devicetree/bindings/eeprom/eeprom.txt index 735bc94444bb..5696eb508e95 100644 --- a/Documentation/devicetree/bindings/eeprom/eeprom.txt +++ b/Documentation/devicetree/bindings/eeprom/eeprom.txt @@ -10,6 +10,8 @@ Required properties: "catalyst,24c32" + "microchip,24c128" + "ramtron,24c64" "renesas,r1ex24002" diff --git a/Documentation/devicetree/bindings/gpio/cortina,gemini-gpio.txt b/Documentation/devicetree/bindings/gpio/cortina,gemini-gpio.txt new file mode 100644 index 000000000000..5c9246c054e5 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/cortina,gemini-gpio.txt @@ -0,0 +1,24 @@ +Cortina Systems Gemini GPIO Controller + +Required properties: + +- compatible : Must be "cortina,gemini-gpio" +- reg : Should contain registers location and length +- interrupts : Should contain the interrupt line for the GPIO block +- gpio-controller : marks this as a GPIO controller +- #gpio-cells : Should be 2, see gpio/gpio.txt +- interrupt-controller : marks this as an interrupt controller +- #interrupt-cells : a standard two-cell interrupt flag, see + interrupt-controller/interrupts.txt + +Example: + +gpio@4d000000 { + compatible = "cortina,gemini-gpio"; + reg = <0x4d000000 0x100>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt index 08dd15f89ba9..e63935710011 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt @@ -29,6 +29,10 @@ Required properties: onsemi,pca9654 exar,xra1202 +Optional properties: + - reset-gpios: GPIO specification for the RESET input. This is an + active low signal to the PCA953x. + Example: diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt index 68d28f62a6f4..84ede036f73d 100644 --- a/Documentation/devicetree/bindings/gpio/gpio.txt +++ b/Documentation/devicetree/bindings/gpio/gpio.txt @@ -187,10 +187,10 @@ gpio-controller's driver probe function. Each GPIO hog definition is represented as a child node of the GPIO controller. Required properties: -- gpio-hog: A property specifying that this child node represent a GPIO hog. -- gpios: Store the GPIO information (id, flags, ...). Shall contain the - number of cells specified in its parent node (GPIO controller - node). +- gpio-hog: A property specifying that this child node represents a GPIO hog. +- gpios: Store the GPIO information (id, flags, ...) for each GPIO to + affect. Shall contain an integer multiple of the number of cells + specified in its parent node (GPIO controller node). Only one of the following properties scanned in the order shown below. This means that when multiple properties are present they will be searched in the order presented below and the first match is taken as the intended diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt new file mode 100644 index 000000000000..476f5ea6c627 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt @@ -0,0 +1,81 @@ +ARM Mali Utgard GPU +=================== + +Required properties: + - compatible + * Must be one of the following: + + "arm,mali-300" + + "arm,mali-400" + + "arm,mali-450" + * And, optionally, one of the vendor specific compatible: + + allwinner,sun4i-a10-mali + + allwinner,sun7i-a20-mali + + amlogic,meson-gxbb-mali + + amlogic,meson-gxl-mali + + stericsson,db8500-mali + + - reg: Physical base address and length of the GPU registers + + - interrupts: an entry for each entry in interrupt-names. + See ../interrupt-controller/interrupts.txt for details. + + - interrupt-names: + * ppX: Pixel Processor X interrupt (X from 0 to 7) + * ppmmuX: Pixel Processor X MMU interrupt (X from 0 to 7) + * pp: Pixel Processor broadcast interrupt (mali-450 only) + * gp: Geometry Processor interrupt + * gpmmu: Geometry Processor MMU interrupt + + - clocks: an entry for each entry in clock-names + - clock-names: + * bus: bus clock for the GPU + * core: clock driving the GPU itself + +Optional properties: + - interrupt-names and interrupts: + * pmu: Power Management Unit interrupt, if implemented in hardware + +Vendor-specific bindings +------------------------ + +The Mali GPU is integrated very differently from one SoC to +another. In order to accomodate those differences, you have the option +to specify one more vendor-specific compatible, among: + + - allwinner,sun4i-a10-mali + Required properties: + * resets: phandle to the reset line for the GPU + + - allwinner,sun7i-a20-mali + Required properties: + * resets: phandle to the reset line for the GPU + + - stericsson,db8500-mali + Required properties: + * interrupt-names and interrupts: + + combined: combined interrupt of all of the above lines + +Example: + +mali: gpu@1c40000 { + compatible = "allwinner,sun7i-a20-mali", "arm,mali-400"; + reg = <0x01c40000 0x10000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pmu"; + clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; + clock-names = "bus", "core"; + resets = <&ccu RST_BUS_GPU>; +}; + diff --git a/Documentation/devicetree/bindings/hwmon/adc128d818.txt b/Documentation/devicetree/bindings/hwmon/adc128d818.txt new file mode 100644 index 000000000000..08bab0e94d25 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adc128d818.txt @@ -0,0 +1,38 @@ +TI ADC128D818 ADC System Monitor With Temperature Sensor +-------------------------------------------------------- + +Operation modes: + + - Mode 0: 7 single-ended voltage readings (IN0-IN6), + 1 temperature reading (internal) + - Mode 1: 8 single-ended voltage readings (IN0-IN7), + no temperature + - Mode 2: 4 pseudo-differential voltage readings + (IN0-IN1, IN3-IN2, IN4-IN5, IN7-IN6), + 1 temperature reading (internal) + - Mode 3: 4 single-ended voltage readings (IN0-IN3), + 2 pseudo-differential voltage readings + (IN4-IN5, IN7-IN6), + 1 temperature reading (internal) + +If no operation mode is configured via device tree, the driver keeps the +currently active chip operation mode (default is mode 0). + + +Required node properties: + + - compatible: must be set to "ti,adc128d818" + - reg: I2C address of the device + +Optional node properties: + + - ti,mode: Operation mode (see above). + + +Example (operation mode 2): + + adc128d818@1d { + compatible = "ti,adc128d818"; + reg = <0x1d>; + ti,mode = <2>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/lm70.txt b/Documentation/devicetree/bindings/hwmon/lm70.txt index e7fd921aa4f1..ea417a0d32af 100644 --- a/Documentation/devicetree/bindings/hwmon/lm70.txt +++ b/Documentation/devicetree/bindings/hwmon/lm70.txt @@ -4,6 +4,7 @@ Required properties: - compatible: one of "ti,lm70" "ti,tmp121" + "ti,tmp122" "ti,lm71" "ti,lm74" diff --git a/Documentation/devicetree/bindings/hwmon/lm90.txt b/Documentation/devicetree/bindings/hwmon/lm90.txt index e8632486b9ef..97581266e329 100644 --- a/Documentation/devicetree/bindings/hwmon/lm90.txt +++ b/Documentation/devicetree/bindings/hwmon/lm90.txt @@ -33,6 +33,11 @@ Optional properties: LM90 "-ALERT" pin output. See interrupt-controller/interrupts.txt for the format. +- #thermal-sensor-cells: should be set to 1. See thermal/thermal.txt for + details. See <include/dt-bindings/thermal/lm90.h> for the + definition of the local, remote and 2nd remote sensor index + constants. + Example LM90 node: temp-sensor { @@ -41,4 +46,5 @@ temp-sensor { vcc-supply = <&palmas_ldo6_reg>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; } diff --git a/Documentation/devicetree/bindings/hwmon/sht15.txt b/Documentation/devicetree/bindings/hwmon/sht15.txt new file mode 100644 index 000000000000..6a80277cc426 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/sht15.txt @@ -0,0 +1,19 @@ +Sensirion SHT15 Humidity and Temperature Sensor + +Required properties: + + - "compatible": must be "sensirion,sht15". + - "data-gpios": GPIO connected to the data line. + - "clk-gpios": GPIO connected to the clock line. + - "vcc-supply": regulator that drives the VCC pin. + +Example: + + sensor { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sensor>; + compatible = "sensirion,sht15"; + clk-gpios = <&gpio4 12 0>; + data-gpios = <&gpio4 13 0>; + vcc-supply = <®_sht15>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/stts751.txt b/Documentation/devicetree/bindings/hwmon/stts751.txt new file mode 100644 index 000000000000..3ee1dc30e72f --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/stts751.txt @@ -0,0 +1,15 @@ +* STTS751 thermometer. + +Required node properties: +- compatible: "stts751" +- reg: I2C bus address of the device + +Optional properties: +- smbus-timeout-disable: when set, the smbus timeout function will be disabled + +Example stts751 node: + +temp-sensor { + compatible = "stts751"; + reg = <0x48>; +} diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt index cf53d5fba20a..aa097045a10e 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt @@ -19,7 +19,14 @@ Optional Properties: - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all children in idle state. This is necessary for example, if there are several multiplexers on the bus and the devices behind them use same I2C addresses. - + - interrupt-parent: Phandle for the interrupt controller that services + interrupts for this device. + - interrupts: Interrupt mapping for IRQ. + - interrupt-controller: Marks the device node as an interrupt controller. + - #interrupt-cells : Should be two. + - first cell is the pin number + - second cell is used to specify flags. + See also Documentation/devicetree/bindings/interrupt-controller/interrupts.txt Example: @@ -29,6 +36,11 @@ Example: #size-cells = <0>; reg = <0x74>; + interrupt-parent = <&ipic>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + i2c@2 { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt b/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt index 7716acc55dec..ae9c2a735f39 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt @@ -10,6 +10,7 @@ Required properties: - "renesas,iic-r8a7793" (R-Car M2-N) - "renesas,iic-r8a7794" (R-Car E2) - "renesas,iic-r8a7795" (R-Car H3) + - "renesas,iic-r8a7796" (R-Car M3-W) - "renesas,iic-sh73a0" (SH-Mobile AG5) - "renesas,rcar-gen2-iic" (generic R-Car Gen2 compatible device) - "renesas,rcar-gen3-iic" (generic R-Car Gen3 compatible device) diff --git a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt new file mode 100644 index 000000000000..78eaf7b718ed --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt @@ -0,0 +1,33 @@ +* I2C controller embedded in STMicroelectronics STM32 I2C platform + +Required properties : +- compatible : Must be "st,stm32f4-i2c" +- reg : Offset and length of the register set for the device +- interrupts : Must contain the interrupt id for I2C event and then the + interrupt id for I2C error. +- resets: Must contain the phandle to the reset controller. +- clocks: Must contain the input clock of the I2C instance. +- A pinctrl state named "default" must be defined to set pins in mode of + operation for I2C transfer +- #address-cells = <1>; +- #size-cells = <0>; + +Optional properties : +- clock-frequency : Desired I2C bus clock frequency in Hz. If not specified, + the default 100 kHz frequency will be used. As only Normal and Fast modes + are supported, possible values are 100000 and 400000. + +Example : + + i2c@40005400 { + compatible = "st,stm32f4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40005400 0x400>; + interrupts = <31>, + <32>; + resets = <&rcc 277>; + clocks = <&rcc 0 149>; + pinctrl-0 = <&i2c1_sda_pin>, <&i2c1_scl_pin>; + pinctrl-names = "default"; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt index 5fa691e6f638..cee9d5055fa2 100644 --- a/Documentation/devicetree/bindings/i2c/i2c.txt +++ b/Documentation/devicetree/bindings/i2c/i2c.txt @@ -62,6 +62,9 @@ wants to support one of the below features, it should adapt the bindings below. "irq" and "wakeup" names are recognized by I2C core, other names are left to individual drivers. +- host-notify + device uses SMBus host notify protocol instead of interrupt line. + - multi-master states that there is another master active on this bus. The OS can use this information to adapt power management to keep the arbitration awake @@ -81,6 +84,11 @@ Binding may contain optional "interrupts" property, describing interrupts used by the device. I2C core will assign "irq" interrupt (or the very first interrupt if not using interrupt names) as primary interrupt for the slave. +Alternatively, devices supporting SMbus Host Notify, and connected to +adapters that support this feature, may use "host-notify" property. I2C +core will create a virtual interrupt for Host Notify and assign it as +primary interrupt for the slave. + Also, if device is marked as a wakeup source, I2C core will set up "wakeup" interrupt for the device. If "wakeup" interrupt name is not present in the binding, then primary interrupt will be used as wakeup interrupt. diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt new file mode 100644 index 000000000000..ab240e10debc --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt @@ -0,0 +1,42 @@ +NVIDIA Tegra186 BPMP I2C controller + +In Tegra186, the BPMP (Boot and Power Management Processor) owns certain HW +devices, such as the I2C controller for the power management I2C bus. Software +running on other CPUs must perform IPC to the BPMP in order to execute +transactions on that I2C bus. This binding describes an I2C bus that is +accessed in such a fashion. + +The BPMP I2C node must be located directly inside the main BPMP node. See +../firmware/nvidia,tegra186-bpmp.txt for details of the BPMP binding. + +This node represents an I2C controller. See ../i2c/i2c.txt for details of the +core I2C binding. + +Required properties: +- compatible: + Array of strings. + One of: + - "nvidia,tegra186-bpmp-i2c". +- #address-cells: Address cells for I2C device address. + Single-cell integer. + Must be <1>. +- #size-cells: + Single-cell integer. + Must be <0>. +- nvidia,bpmp-bus-id: + Single-cell integer. + Indicates the I2C bus number this DT node represent, as defined by the + BPMP firmware. + +Example: + +bpmp { + ... + + i2c { + compatible = "nvidia,tegra186-bpmp-i2c"; + #address-cells = <1>; + #size-cells = <0>; + nvidia,bpmp-bus-id = <5>; + }; +}; diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index cdd7b48826c3..ad10fbe61562 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -36,6 +36,7 @@ dallas,ds1775 Tiny Digital Thermometer and Thermostat dallas,ds3232 Extremely Accurate I²C RTC with Integrated Crystal and SRAM dallas,ds4510 CPU Supervisor with Nonvolatile Memory and Programmable I/O dallas,ds75 Digital Thermometer and Thermostat +devantech,srf08 Devantech SRF08 ultrasonic ranger dlg,da9053 DA9053: flexible system level PMIC with multicore support dlg,da9063 DA9063: system PMIC for quad-core application processors domintech,dmard09 DMARD09: 3-axis Accelerometer diff --git a/Documentation/devicetree/bindings/iio/accel/lis302.txt b/Documentation/devicetree/bindings/iio/accel/lis302.txt index 2a19bff9693f..dfdce67826ba 100644 --- a/Documentation/devicetree/bindings/iio/accel/lis302.txt +++ b/Documentation/devicetree/bindings/iio/accel/lis302.txt @@ -5,7 +5,7 @@ that apply in on the generic device (independent from the bus). Required properties for the SPI bindings: - - compatible: should be set to "st,lis3lv02d_spi" + - compatible: should be set to "st,lis3lv02d-spi" - reg: the chipselect index - spi-max-frequency: maximal bus speed, should be set to 1000000 unless constrained by external circuitry diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt new file mode 100644 index 000000000000..f9e3ff2c656e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt @@ -0,0 +1,32 @@ +* Amlogic Meson SAR (Successive Approximation Register) A/D converter + +Required properties: +- compatible: depending on the SoC this should be one of: + - "amlogic,meson-gxbb-saradc" for GXBB + - "amlogic,meson-gxl-saradc" for GXL + - "amlogic,meson-gxm-saradc" for GXM + along with the generic "amlogic,meson-saradc" +- reg: the physical base address and length of the registers +- clocks: phandle and clock identifier (see clock-names) +- clock-names: mandatory clocks: + - "clkin" for the reference clock (typically XTAL) + - "core" for the SAR ADC core clock + optional clocks: + - "sana" for the analog clock + - "adc_clk" for the ADC (sampling) clock + - "adc_sel" for the ADC (sampling) clock mux +- vref-supply: the regulator supply for the ADC reference voltage +- #io-channel-cells: must be 1, see ../iio-bindings.txt + +Example: + saradc: adc@8680 { + compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc"; + #io-channel-cells = <1>; + reg = <0x0 0x8680 0x0 0x34>; + clocks = <&xtal>, + <&clkc CLKID_SAR_ADC>, + <&clkc CLKID_SANA>, + <&clkc CLKID_SAR_ADC_CLK>, + <&clkc CLKID_SAR_ADC_SEL>; + clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel"; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt b/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt new file mode 100644 index 000000000000..b3629405f568 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt @@ -0,0 +1,18 @@ +* AVIA HX711 ADC chip for weight cells + Bit-banging driver + +Required properties: + - compatible: Should be "avia,hx711" + - sck-gpios: Definition of the GPIO for the clock + - dout-gpios: Definition of the GPIO for data-out + See Documentation/devicetree/bindings/gpio/gpio.txt + - avdd-supply: Definition of the regulator used as analog supply + +Example: +weight@0 { + compatible = "avia,hx711"; + sck-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>; + dout-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + avdd-suppy = <&avdd>; +}; + diff --git a/Documentation/devicetree/bindings/iio/adc/max11100.txt b/Documentation/devicetree/bindings/iio/adc/max11100.txt new file mode 100644 index 000000000000..b7f7177b8aca --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/max11100.txt @@ -0,0 +1,18 @@ +* Maxim max11100 Analog to Digital Converter (ADC) + +Required properties: + - compatible: Should be "maxim,max11100" + - reg: the adc unit address + - vref-supply: phandle to the regulator that provides reference voltage + +Optional properties: + - spi-max-frequency: SPI maximum frequency + +Example: + +max11100: adc@0 { + compatible = "maxim,max11100"; + reg = <0>; + vref-supply = <&adc0_vref>; + spi-max-frequency = <240000>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt new file mode 100644 index 000000000000..53cd146d8096 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt @@ -0,0 +1,149 @@ +Qualcomm's PM8xxx voltage XOADC + +The Qualcomm PM8xxx PMICs contain a HK/XO ADC (Housekeeping/Crystal +oscillator ADC) encompassing PM8018, PM8038, PM8058 and PM8921. + +Required properties: + +- compatible: should be one of: + "qcom,pm8018-adc" + "qcom,pm8038-adc" + "qcom,pm8058-adc" + "qcom,pm8921-adc" + +- reg: should contain the ADC base address in the PMIC, typically + 0x197. + +- xoadc-ref-supply: should reference a regulator that can supply + a reference voltage on demand. The reference voltage may vary + with PMIC variant but is typically something like 2.2 or 1.8V. + +The following required properties are standard for IO channels, see +iio-bindings.txt for more details: + +- #address-cells: should be set to <1> + +- #size-cells: should be set to <0> + +- #io-channel-cells: should be set to <1> + +- interrupts: should refer to the parent PMIC interrupt controller + and reference the proper ADC interrupt. + +Required subnodes: + +The ADC channels are configured as subnodes of the ADC. Since some of +them are used for calibrating the ADC, these nodes are compulsory: + +adc-channel@c { + reg = <0x0c>; +}; + +adc-channel@d { + reg = <0x0d>; +}; + +adc-channel@f { + reg = <0x0f>; +}; + +These three nodes are used for absolute and ratiometric calibration +and only need to have these reg values: they are by hardware definition +1:1 ratio converters that sample 625, 1250 and 0 milliV and create +an interpolation calibration for all other ADCs. + +Optional subnodes: any channels other than channel 0x0c, 0x0d and +0x0f are optional. + +Required channel node properties: + +- reg: should contain the hardware channel number in the range + 0 .. 0x0f (4 bits). The hardware only supports 16 channels. + +Optional channel node properties: + +- qcom,decimation: + Value type: <u32> + Definition: This parameter is used to decrease the ADC sampling rate. + Quicker measurements can be made by reducing the decimation ratio. + Valid values are 512, 1024, 2048, 4096. + If the property is not found, a default value of 512 will be used. + +- qcom,ratiometric: + Value type: <u32> + Definition: Channel calibration type. If this property is specified + VADC will use a special voltage references for channel + calibration. The available references are specified in the + as a u32 value setting (see below) and it is compulsory + to also specify this reference if ratiometric calibration + is selected. + + If the property is not found, the channel will be + calibrated with the 0.625V and 1.25V reference channels, also + known as an absolute calibration. + The reference voltage pairs when using ratiometric calibration: + 0 = XO_IN/XOADC_GND + 1 = PMIC_IN/XOADC_GND + 2 = PMIC_IN/BMS_CSP + 3 (invalid) + 4 = XOADC_GND/XOADC_GND + 5 = XOADC_VREF/XOADC_GND + +Example: + +xoadc: xoadc@197 { + compatible = "qcom,pm8058-adc"; + reg = <0x197>; + interrupt-parent = <&pm8058>; + interrupts = <76 1>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + vcoin: adc-channel@0 { + reg = <0x00>; + }; + vbat: adc-channel@1 { + reg = <0x01>; + }; + dcin: adc-channel@2 { + reg = <0x02>; + }; + ichg: adc-channel@3 { + reg = <0x03>; + }; + vph_pwr: adc-channel@4 { + reg = <0x04>; + }; + usb_vbus: adc-channel@a { + reg = <0x0a>; + }; + die_temp: adc-channel@b { + reg = <0x0b>; + }; + ref_625mv: adc-channel@c { + reg = <0x0c>; + }; + ref_1250mv: adc-channel@d { + reg = <0x0d>; + }; + ref_325mv: adc-channel@e { + reg = <0x0e>; + }; + ref_muxoff: adc-channel@f { + reg = <0x0f>; + }; +}; + + +/* IIO client node */ +iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&xoadc 0x01>, /* Battery */ + <&xoadc 0x02>, /* DC in (charger) */ + <&xoadc 0x04>, /* VPH the main system voltage */ + <&xoadc 0x0b>, /* Die temperature */ + <&xoadc 0x0c>, /* Reference voltage 1.25V */ + <&xoadc 0x0d>, /* Reference voltage 0.625V */ + <&xoadc 0x0e>; /* Reference voltage 0.325V */ +}; diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,gyroadc.txt b/Documentation/devicetree/bindings/iio/adc/renesas,gyroadc.txt new file mode 100644 index 000000000000..f5b0adae6010 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/renesas,gyroadc.txt @@ -0,0 +1,99 @@ +* Renesas RCar GyroADC device driver + +The GyroADC block is a reduced SPI block with up to 8 chipselect lines, +which supports the SPI protocol of a selected few SPI ADCs. The SPI ADCs +are sampled by the GyroADC block in a round-robin fashion and the result +presented in the GyroADC registers. + +Required properties: +- compatible: Should be "<soc-specific>", "renesas,rcar-gyroadc". + The <soc-specific> should be one of: + renesas,r8a7791-gyroadc - for the GyroADC block present + in r8a7791 SoC + renesas,r8a7792-gyroadc - for the GyroADC with interrupt + block present in r8a7792 SoC +- reg: Address and length of the register set for the device +- clocks: References to all the clocks specified in the clock-names + property as specified in + Documentation/devicetree/bindings/clock/clock-bindings.txt. +- clock-names: Shall contain "fck" and "if". The "fck" is the GyroADC block + clock, the "if" is the interface clock. +- power-domains: Must contain a reference to the PM domain, if available. +- #address-cells: Should be <1> (setting for the subnodes) for all ADCs + except for "fujitsu,mb88101a". Should be <0> (setting for + only subnode) for "fujitsu,mb88101a". +- #size-cells: Should be <0> (setting for the subnodes) + +Sub-nodes: +You must define subnode(s) which select the connected ADC type and reference +voltage for the GyroADC channels. + +Required properties for subnodes: +- compatible: Should be either of: + "fujitsu,mb88101a" + - Fujitsu MB88101A compatible mode, + 12bit sampling, up to 4 channels can be sampled in + round-robin fashion. One Fujitsu chip supplies four + GyroADC channels with data as it contains four ADCs + on the chip and thus for 4-channel operation, single + MB88101A is required. The Cx chipselect lines of the + MB88101A connect directly to two CHS lines of the + GyroADC, no demuxer is required. The data out line + of each MB88101A connects to a shared input pin of + the GyroADC. + "ti,adcs7476" or "ti,adc121" or "adi,ad7476" + - TI ADCS7476 / TI ADC121 / ADI AD7476 compatible mode, + 15bit sampling, up to 8 channels can be sampled in + round-robin fashion. One TI/ADI chip supplies single + ADC channel with data, thus for 8-channel operation, + 8 chips are required. A 3:8 chipselect demuxer is + required to connect the nCS line of the TI/ADI chips + to the GyroADC, while MISO line of each TI/ADI ADC + connects to a shared input pin of the GyroADC. + "maxim,max1162" or "maxim,max11100" + - Maxim MAX1162 / Maxim MAX11100 compatible mode, + 16bit sampling, up to 8 channels can be sampled in + round-robin fashion. One Maxim chip supplies single + ADC channel with data, thus for 8-channel operation, + 8 chips are required. A 3:8 chipselect demuxer is + required to connect the nCS line of the MAX chips + to the GyroADC, while MISO line of each Maxim ADC + connects to a shared input pin of the GyroADC. +- reg: Should be the number of the analog input. Should be present + for all ADCs except "fujitsu,mb88101a". +- vref-supply: Reference to the channel reference voltage regulator. + +Example: + vref_max1162: regulator-vref-max1162 { + compatible = "regulator-fixed"; + + regulator-name = "MAX1162 Vref"; + regulator-min-microvolt = <4096000>; + regulator-max-microvolt = <4096000>; + }; + + adc@e6e54000 { + compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc"; + reg = <0 0xe6e54000 0 64>; + clocks = <&mstp9_clks R8A7791_CLK_GYROADC>, <&clk_65m>; + clock-names = "fck", "if"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + + pinctrl-0 = <&adc_pins>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + reg = <0>; + compatible = "maxim,max1162"; + vref-supply = <&vref_max1162>; + }; + + adc@1 { + reg = <1>; + compatible = "maxim,max1162"; + vref-supply = <&vref_max1162>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt index 49ed82e89870..5dfc88ec24a4 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt @@ -53,6 +53,11 @@ Required properties: - #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in Documentation/devicetree/bindings/iio/iio-bindings.txt +Optional properties: +- dmas: Phandle to dma channel for this ADC instance. + See ../../dma/dma.txt for details. +- dma-names: Must be "rx" when dmas property is being used. + Example: adc: adc@40012000 { compatible = "st,stm32f4-adc-core"; @@ -77,6 +82,8 @@ Example: interrupt-parent = <&adc>; interrupts = <0>; st,adc-channels = <8>; + dmas = <&dma2 0 0 0x400 0x0>; + dma-names = "rx"; }; ... other adc child nodes follow... diff --git a/Documentation/devicetree/bindings/iio/adc/ti-ads7950.txt b/Documentation/devicetree/bindings/iio/adc/ti-ads7950.txt new file mode 100644 index 000000000000..e77a6f7e1001 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti-ads7950.txt @@ -0,0 +1,23 @@ +* Texas Instruments ADS7950 family of A/DC chips + +Required properties: + - compatible: Must be one of "ti,ads7950", "ti,ads7951", "ti,ads7952", + "ti,ads7953", "ti,ads7954", "ti,ads7955", "ti,ads7956", "ti,ads7957", + "ti,ads7958", "ti,ads7959", "ti,ads7960", or "ti,ads7961" + - reg: SPI chip select number for the device + - #io-channel-cells: Must be 1 as per ../iio-bindings.txt + - vref-supply: phandle to a regulator node that supplies the 2.5V or 5V + reference voltage + +Recommended properties: + - spi-max-frequency: Definition as per + Documentation/devicetree/bindings/spi/spi-bus.txt + +Example: +adc@0 { + compatible = "ti,ads7957"; + reg = <0>; + #io-channel-cells = <1>; + vref-supply = <&refin_supply>; + spi-max-frequency = <10000000>; +}; diff --git a/Documentation/devicetree/bindings/iio/imu/bmi160.txt b/Documentation/devicetree/bindings/iio/imu/bmi160.txt new file mode 100644 index 000000000000..ae0112c7debc --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/bmi160.txt @@ -0,0 +1,36 @@ +Bosch BMI160 - Inertial Measurement Unit with Accelerometer, Gyroscope +and externally connectable Magnetometer + +https://www.bosch-sensortec.com/bst/products/all_products/bmi160 + +Required properties: + - compatible : should be "bosch,bmi160" + - reg : the I2C address or SPI chip select number of the sensor + - spi-max-frequency : set maximum clock frequency (only for SPI) + +Optional properties: + - interrupt-parent : should be the phandle of the interrupt controller + - interrupts : interrupt mapping for IRQ, must be IRQ_TYPE_LEVEL_LOW + - interrupt-names : set to "INT1" if INT1 pin should be used as interrupt + input, set to "INT2" if INT2 pin should be used instead + +Examples: + +bmi160@68 { + compatible = "bosch,bmi160"; + reg = <0x68>; + + interrupt-parent = <&gpio4>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT1"; +}; + +bmi160@0 { + compatible = "bosch,bmi160"; + reg = <0>; + spi-max-frequency = <10000000>; + + interrupt-parent = <&gpio2>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT2"; +}; diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt new file mode 100644 index 000000000000..cf81afdf7803 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt @@ -0,0 +1,26 @@ +* ST_LSM6DSx driver for STM 6-axis (acc + gyro) imu Mems sensors + +Required properties: +- compatible: must be one of: + "st,lsm6ds3" + "st,lsm6dsm" +- reg: i2c address of the sensor / spi cs line + +Optional properties: +- st,drdy-int-pin: the pin on the package that will be used to signal + "data ready" (valid values: 1 or 2). +- interrupt-parent: should be the phandle for the interrupt controller +- interrupts: interrupt mapping for IRQ. It should be configured with + flags IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_EDGE_RISING. + + Refer to interrupt-controller/interrupts.txt for generic interrupt + client node bindings. + +Example: + +lsm6dsm@6b { + compatible = "st,lsm6dsm"; + reg = <0x6b>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; +}; diff --git a/Documentation/devicetree/bindings/iio/light/cm3605.txt b/Documentation/devicetree/bindings/iio/light/cm3605.txt new file mode 100644 index 000000000000..56331a79f9ab --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/cm3605.txt @@ -0,0 +1,41 @@ +Capella Microsystems CM3605 +Ambient Light and Short Distance Proximity Sensor + +The CM3605 is an entirely analog part which however require quite a bit of +software logic to interface a host operating system. + +This ALS and proximity sensor was one of the very first deployed in mobile +handsets, notably it is used in the very first Nexus One Android phone from +2010. + +Required properties: +- compatible: must be: "capella,cm3605" +- aset-gpios: GPIO line controlling the ASET line (drive low + to activate the ALS, should be flagged GPIO_ACTIVE_LOW) +- interrupts: the IRQ line (such as a GPIO) that is connected to + the POUT (proximity sensor out) line. The edge detection must + be set to IRQ_TYPE_EDGE_BOTH so as to detect movements toward + and away from the proximity sensor. +- io-channels: the ADC channel used for converting the voltage from + AOUT to a digital representation. +- io-channel-names: must be "aout" + +Optional properties: +- vdd-supply: regulator supplying VDD power to the component. +- capella,aset-resistance-ohms: the sensitivity calibration resistance, + in Ohms. Valid values are: 50000, 100000, 300000 and 600000, + as these are the resistance values that we are supplied with + calibration curves for. If not supplied, 100 kOhm will be assumed + but it is strongly recommended to supply this. + +Example: + +cm3605 { + compatible = "capella,cm3605"; + vdd-supply = <&foo_reg>; + aset-gpios = <&foo_gpio 1 GPIO_ACTIVE_LOW>; + capella,aset-resistance-ohms = <100000>; + interrupts = <1 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&adc 0x01>; + io-channel-names = "aout"; +}; diff --git a/Documentation/devicetree/bindings/iio/potentiometer/max5481.txt b/Documentation/devicetree/bindings/iio/potentiometer/max5481.txt new file mode 100644 index 000000000000..6a91b106e076 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/potentiometer/max5481.txt @@ -0,0 +1,23 @@ +* Maxim Linear-Taper Digital Potentiometer MAX5481-MAX5484 + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in + + Documentation/devicetree/bindings/spi/spi-bus.txt + +must be specified. + +Required properties: + - compatible: Must be one of the following, depending on the + model: + "maxim,max5481" + "maxim,max5482" + "maxim,max5483" + "maxim,max5484" + +Example: +max548x: max548x@0 { + compatible = "maxim,max5482"; + spi-max-frequency = <7000000>; + reg = <0>; /* chip-select */ +}; diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt index c040c9ad1889..eaa8fbba34e2 100644 --- a/Documentation/devicetree/bindings/iio/st-sensors.txt +++ b/Documentation/devicetree/bindings/iio/st-sensors.txt @@ -27,6 +27,8 @@ standard bindings from pinctrl/pinctrl-bindings.txt. Valid compatible strings: Accelerometers: +- st,lis3lv02d (deprecated, use st,lis3lv02dl-accel) +- st,lis302dl-spi (deprecated, use st,lis3lv02dl-accel) - st,lis3lv02dl-accel - st,lsm303dlh-accel - st,lsm303dlhc-accel diff --git a/Documentation/devicetree/bindings/iio/temperature/tmp007.txt b/Documentation/devicetree/bindings/iio/temperature/tmp007.txt new file mode 100644 index 000000000000..b63aba91ef03 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/tmp007.txt @@ -0,0 +1,35 @@ +* TI TMP007 - IR thermopile sensor with integrated math engine + +Link to datasheet: http://www.ti.com/lit/ds/symlink/tmp007.pdf + +Required properties: + + - compatible: should be "ti,tmp007" + - reg: the I2C address of the sensor (changeable via ADR pins) + ------------------------------ + |ADR1 | ADR0 | Device Address| + ------------------------------ + 0 0 0x40 + 0 1 0x41 + 0 SDA 0x42 + 0 SCL 0x43 + 1 0 0x44 + 1 1 0x45 + 1 SDA 0x46 + 1 SCL 0x47 + +Optional properties: + + - interrupt-parent: should be the phandle for the interrupt controller + + - interrupts: interrupt mapping for GPIO IRQ (level active low) + +Example: + +tmp007@40 { + compatible = "ti,tmp007"; + reg = <0x40>; + interrupt-parent = <&gpio0>; + interrupts = <5 0x08>; +}; + diff --git a/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt b/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt new file mode 100644 index 000000000000..55a653d15303 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt @@ -0,0 +1,23 @@ +STMicroelectronics STM32 Timers IIO timer bindings + +Must be a sub-node of an STM32 Timers device tree node. +See ../mfd/stm32-timers.txt for details about the parent node. + +Required parameters: +- compatible: Must be "st,stm32-timer-trigger". +- reg: Identify trigger hardware block. + +Example: + timers@40010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40010000 0x400>; + clocks = <&rcc 0 160>; + clock-names = "clk_int"; + + timer@0 { + compatible = "st,stm32-timer-trigger"; + reg = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt new file mode 100644 index 000000000000..635f62c756ee --- /dev/null +++ b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt @@ -0,0 +1,27 @@ +Samsung tm2-touchkey + +Required properties: +- compatible: must be "cypress,tm2-touchkey" +- reg: I2C address of the chip. +- interrupt-parent: a phandle for the interrupt controller (see interrupt + binding[0]). +- interrupts: interrupt to which the chip is connected (see interrupt + binding[0]). +- vcc-supply : internal regulator output. 1.8V +- vdd-supply : power supply for IC 3.3V + +[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + +Example: + &i2c0 { + /* ... */ + + touchkey@20 { + compatible = "cypress,tm2-touchkey"; + reg = <0x20>; + interrupt-parent = <&gpa3>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + vcc-supply=<&ldo32_reg>; + vdd-supply=<&ldo33_reg>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/mpr121-touchkey.txt b/Documentation/devicetree/bindings/input/mpr121-touchkey.txt new file mode 100644 index 000000000000..b7c61ee5841b --- /dev/null +++ b/Documentation/devicetree/bindings/input/mpr121-touchkey.txt @@ -0,0 +1,30 @@ +* Freescale MPR121 Controllor + +Required Properties: +- compatible: Should be "fsl,mpr121-touchkey" +- reg: The I2C slave address of the device. +- interrupts: The interrupt number to the cpu. +- vdd-supply: Phandle to the Vdd power supply. +- linux,keycodes: Specifies an array of numeric keycode values to + be used for reporting button presses. The array can + contain up to 12 entries. + +Optional Properties: +- wakeup-source: Use any event on keypad as wakeup event. +- autorepeat: Enable autorepeat feature. + +Example: + +#include "dt-bindings/input/input.h" + + touchkey: mpr121@5a { + compatible = "fsl,mpr121-touchkey"; + reg = <0x5a>; + interrupt-parent = <&gpio1>; + interrupts = <28 2>; + autorepeat; + vdd-supply = <&ldo4_reg>; + linux,keycodes = <KEY_0>, <KEY_1>, <KEY_2>, <KEY_3>, + <KEY_4> <KEY_5>, <KEY_6>, <KEY_7>, + <KEY_8>, <KEY_9>, <KEY_A>, <KEY_B>; + }; diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.txt b/Documentation/devicetree/bindings/input/pwm-beeper.txt index be332ae4f2d6..529408b4431a 100644 --- a/Documentation/devicetree/bindings/input/pwm-beeper.txt +++ b/Documentation/devicetree/bindings/input/pwm-beeper.txt @@ -5,3 +5,19 @@ Registers a PWM device as beeper. Required properties: - compatible: should be "pwm-beeper" - pwms: phandle to the physical PWM device + +Optional properties: +- amp-supply: phandle to a regulator that acts as an amplifier for the beeper + +Example: + +beeper_amp: amplifier { + compatible = "fixed-regulator"; + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; +}; + +beeper { + compatible = "pwm-beeper"; + pwms = <&pwm0>; + amp-supply = <&beeper_amp>; +}; diff --git a/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt b/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt new file mode 100644 index 000000000000..fe6a1feef703 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt @@ -0,0 +1,32 @@ +Zeitec ZET6223 I2C touchscreen controller + +Required properties: +- compatible : "zeitec,zet6223" +- reg : I2C slave address of the chip (0x76) +- interrupt-parent : a phandle pointing to the interrupt controller + serving the interrupt for this chip +- interrupts : interrupt specification for the zet6223 interrupt + +Optional properties: + +- vio-supply : Specification for VIO supply (1.8V or 3.3V, + depending on system interface needs). +- vcc-supply : Specification for 3.3V VCC supply. +- touchscreen-size-x : See touchscreen.txt +- touchscreen-size-y : See touchscreen.txt +- touchscreen-inverted-x : See touchscreen.txt +- touchscreen-inverted-y : See touchscreen.txt +- touchscreen-swapped-x-y : See touchscreen.txt + +Example: + +i2c@00000000 { + + zet6223: touchscreen@76 { + compatible = "zeitec,zet6223"; + reg = <0x76>; + interrupt-parent = <&pio>; + interrupts = <6 11 IRQ_TYPE_EDGE_FALLING> + }; + +}; diff --git a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt index 3e5b9793341f..8682ab6d4a50 100644 --- a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt +++ b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt @@ -8,8 +8,9 @@ This driver provides a simple power button event via an Interrupt. Required properties: - compatible: should be "ti,tps65217-pwrbutton" or "ti,tps65218-pwrbutton" -Required properties for TPS65218: +Required properties: - interrupts: should be one of the following + - <2>: For controllers compatible with tps65217 - <3 IRQ_TYPE_EDGE_BOTH>: For controllers compatible with tps65218 Examples: @@ -17,6 +18,7 @@ Examples: &tps { tps65217-pwrbutton { compatible = "ti,tps65217-pwrbutton"; + interrupts = <2>; }; }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt index 5393e2a45a42..560d8a727b8f 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt @@ -111,7 +111,7 @@ Example: #interrupt-cells = <3>; interrupt-controller; reg = <0x2c001000 0x1000>, - <0x2c002000 0x1000>, + <0x2c002000 0x2000>, <0x2c004000 0x2000>, <0x2c006000 0x2000>; interrupts = <1 9 0xf04>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/cortina,gemini-interrupt-controller.txt b/Documentation/devicetree/bindings/interrupt-controller/cortina,gemini-interrupt-controller.txt new file mode 100644 index 000000000000..97c1167fa533 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/cortina,gemini-interrupt-controller.txt @@ -0,0 +1,22 @@ +* Cortina Systems Gemini interrupt controller + +This interrupt controller is found on the Gemini SoCs. + +Required properties: +- compatible: must be "cortina,gemini-interrupt-controller" +- reg: The register bank for the interrupt controller. +- interrupt-controller: Identifies the node as an interrupt controller +- #interrupt-cells: The number of cells to define the interrupts. + Must be 2 as the controller can specify level or rising edge + IRQs. The bindings follows the standard binding for controllers + with two cells specified in + interrupt-controller/interrupts.txt + +Example: + +interrupt-controller@48000000 { + compatible = "cortina,gemini-interrupt-controller"; + reg = <0x48000000 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt index 0dcb7c7d3e40..8b46a34e05f1 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt @@ -8,12 +8,11 @@ Properties: - compatible: "snps,archs-idu-intc" - interrupt-controller: This is an interrupt controller. - interrupt-parent: <reference to parent core intc> -- #interrupt-cells: Must be <2>. -- interrupts: <...> specifies the upstream core irqs +- #interrupt-cells: Must be <1>. - First cell specifies the "common" IRQ from peripheral to IDU - Second cell specifies the irq distribution mode to cores - 0=Round Robin; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3 + Value of the cell specifies the "common" IRQ from peripheral to IDU. Number N + of the particular interrupt line of IDU corresponds to the line N+24 of the + core interrupt controller. intc accessed via the special ARC AUX register interface, hence "reg" property is not specified. @@ -29,18 +28,10 @@ Example: compatible = "snps,archs-idu-intc"; interrupt-controller; interrupt-parent = <&core_intc>; - - /* - * <hwirq distribution> - * distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3 - */ - #interrupt-cells = <2>; - - /* upstream core irqs: downstream these are "COMMON" irq 0,1.. */ - interrupts = <24 25 26 27 28 29 30 31>; + #interrupt-cells = <1>; }; some_device: serial@c0fc1000 { interrupt-parent = <&idu_intc>; - interrupts = <0 0>; /* upstream idu IRQ #24, Round Robin */ + interrupts = <0>; /* upstream idu IRQ #24 */ }; diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.txt b/Documentation/devicetree/bindings/iommu/arm,smmu.txt index e862d1485205..6cdf32d037fc 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu.txt +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.txt @@ -36,15 +36,15 @@ conditions. combined interrupt, it must be listed multiple times. - #iommu-cells : See Documentation/devicetree/bindings/iommu/iommu.txt - for details. With a value of 1, each "iommus" entry + for details. With a value of 1, each IOMMU specifier represents a distinct stream ID emitted by that device into the relevant SMMU. SMMUs with stream matching support and complex masters - may use a value of 2, where the second cell represents - an SMR mask to combine with the ID in the first cell. - Care must be taken to ensure the set of matched IDs - does not result in conflicts. + may use a value of 2, where the second cell of the + IOMMU specifier represents an SMR mask to combine with + the ID in the first cell. Care must be taken to ensure + the set of matched IDs does not result in conflicts. ** System MMU optional properties: diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt index 696be5792625..24b656014089 100644 --- a/Documentation/devicetree/bindings/leds/common.txt +++ b/Documentation/devicetree/bindings/leds/common.txt @@ -61,16 +61,24 @@ property can be omitted. Examples: -system-status { - label = "Status"; - linux,default-trigger = "heartbeat"; - ... +gpio-leds { + compatible = "gpio-leds"; + + system-status { + label = "Status"; + linux,default-trigger = "heartbeat"; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + }; }; -camera-flash { - label = "Flash"; - led-sources = <0>, <1>; - led-max-microamp = <50000>; - flash-max-microamp = <320000>; - flash-max-timeout-us = <500000>; +max77693-led { + compatible = "maxim,max77693-led"; + + camera-flash { + label = "Flash"; + led-sources = <0>, <1>; + led-max-microamp = <50000>; + flash-max-microamp = <320000>; + flash-max-timeout-us = <500000>; + }; }; diff --git a/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt b/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt new file mode 100644 index 000000000000..896b6997cf30 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt @@ -0,0 +1,29 @@ +Device tree bindings for IR LED connected through SPI bus which is used as +remote controller. + +The IR LED switch is connected to the MOSI line of the SPI device and the data +are delivered thourgh that. + +Required properties: + - compatible: should be "ir-spi-led". + +Optional properties: + - duty-cycle: 8 bit balue that represents the percentage of one period + in which the signal is active. It can be 50, 60, 70, 75, 80 or 90. + - led-active-low: boolean value that specifies whether the output is + negated with a NOT gate. + - power-supply: specifies the power source. It can either be a regulator + or a gpio which enables a regulator, i.e. a regulator-fixed as + described in + Documentation/devicetree/bindings/regulator/fixed-regulator.txt + +Example: + + irled@0 { + compatible = "ir-spi-led"; + reg = <0x0>; + spi-max-frequency = <5000000>; + power-supply = <&vdd_led>; + led-active-low; + duty-cycle = /bits/ 8 <60>; + }; diff --git a/Documentation/devicetree/bindings/media/fsl-vdoa.txt b/Documentation/devicetree/bindings/media/fsl-vdoa.txt new file mode 100644 index 000000000000..6c5628530bb7 --- /dev/null +++ b/Documentation/devicetree/bindings/media/fsl-vdoa.txt @@ -0,0 +1,21 @@ +Freescale Video Data Order Adapter +================================== + +The Video Data Order Adapter (VDOA) is present on the i.MX6q. Its sole purpose +is to reorder video data from the macroblock tiled order produced by the CODA +960 VPU to the conventional raster-scan order for scanout. + +Required properties: +- compatible: must be "fsl,imx6q-vdoa" +- reg: the register base and size for the device registers +- interrupts: the VDOA interrupt +- clocks: the vdoa clock + +Example: + +vdoa@21e4000 { + compatible = "fsl,imx6q-vdoa"; + reg = <0x021e4000 0x4000>; + interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_VDOA>; +}; diff --git a/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt b/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt index 56e726ef4bf2..58261fb7b408 100644 --- a/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt +++ b/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt @@ -5,7 +5,8 @@ Required properties: - gpios: specifies GPIO used for IR signal reception. Optional properties: - - linux,rc-map-name: Linux specific remote control map name. + - linux,rc-map-name: see rc.txt file in the same + directory. Example node: diff --git a/Documentation/devicetree/bindings/media/hix5hd2-ir.txt b/Documentation/devicetree/bindings/media/hix5hd2-ir.txt index 54e1bede6244..13ebc0fac9ea 100644 --- a/Documentation/devicetree/bindings/media/hix5hd2-ir.txt +++ b/Documentation/devicetree/bindings/media/hix5hd2-ir.txt @@ -10,7 +10,7 @@ Required properties: - clocks: clock phandle and specifier pair. Optional properties: - - linux,rc-map-name : Remote control map name. + - linux,rc-map-name: see rc.txt file in the same directory. - hisilicon,power-syscon: DEPRECATED. Don't use this in new dts files. Provide correct clocks instead. diff --git a/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt b/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt new file mode 100644 index 000000000000..0b7b6a4d84ff --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt @@ -0,0 +1,48 @@ +Toshiba et8ek8 5MP sensor + +Toshiba et8ek8 5MP sensor is an image sensor found in Nokia N900 device + +More detailed documentation can be found in +Documentation/devicetree/bindings/media/video-interfaces.txt . + + +Mandatory properties +-------------------- + +- compatible: "toshiba,et8ek8" +- reg: I2C address (0x3e, or an alternative address) +- vana-supply: Analogue voltage supply (VANA), 2.8 volts +- clocks: External clock to the sensor +- clock-frequency: Frequency of the external clock to the sensor. Camera + driver will set this frequency on the external clock. The clock frequency is + a pre-determined frequency known to be suitable to the board. +- reset-gpios: XSHUTDOWN GPIO. The XSHUTDOWN signal is active low. The sensor + is in hardware standby mode when the signal is in the low state. + + +Endpoint node mandatory properties +---------------------------------- + +- remote-endpoint: A phandle to the bus receiver's endpoint node. + + +Example +------- + +&i2c3 { + clock-frequency = <400000>; + + cam1: camera@3e { + compatible = "toshiba,et8ek8"; + reg = <0x3e>; + vana-supply = <&vaux4>; + clocks = <&isp 0>; + clock-frequency = <9600000>; + reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */ + port { + csi_cam1: endpoint { + remote-endpoint = <&csi_out1>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/media/meson-ir.txt b/Documentation/devicetree/bindings/media/meson-ir.txt index e7e3f3c4fc8f..efd9d29a8f10 100644 --- a/Documentation/devicetree/bindings/media/meson-ir.txt +++ b/Documentation/devicetree/bindings/media/meson-ir.txt @@ -8,6 +8,9 @@ Required properties: - reg : physical base address and length of the device registers - interrupts : a single specifier for the interrupt from the device +Optional properties: + - linux,rc-map-name: see rc.txt file in the same directory. + Example: ir-receiver@c8100480 { diff --git a/Documentation/devicetree/bindings/media/mtk-cir.txt b/Documentation/devicetree/bindings/media/mtk-cir.txt new file mode 100644 index 000000000000..2be2005577d6 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mtk-cir.txt @@ -0,0 +1,24 @@ +Device-Tree bindings for Mediatek consumer IR controller +found in Mediatek SoC family + +Required properties: +- compatible : "mediatek,mt7623-cir" +- clocks : list of clock specifiers, corresponding to + entries in clock-names property; +- clock-names : should contain "clk" entries; +- interrupts : should contain IR IRQ number; +- reg : should contain IO map address for IR. + +Optional properties: +- linux,rc-map-name : see rc.txt file in the same directory. + +Example: + +cir: cir@10013000 { + compatible = "mediatek,mt7623-cir"; + reg = <0 0x10013000 0 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_IRRX>; + clock-names = "clk"; + linux,rc-map-name = "rc-rc6-mce"; +}; diff --git a/Documentation/devicetree/bindings/media/rc.txt b/Documentation/devicetree/bindings/media/rc.txt new file mode 100644 index 000000000000..d3e7a012bfda --- /dev/null +++ b/Documentation/devicetree/bindings/media/rc.txt @@ -0,0 +1,117 @@ +The following properties are common to the infrared remote controllers: + +- linux,rc-map-name: string, specifies the scancode/key mapping table + defined in-kernel for the remote controller. Support values are: + * "rc-adstech-dvb-t-pci" + * "rc-alink-dtu-m" + * "rc-anysee" + * "rc-apac-viewcomp" + * "rc-asus-pc39" + * "rc-asus-ps3-100" + * "rc-ati-tv-wonder-hd-600" + * "rc-ati-x10" + * "rc-avermedia-a16d" + * "rc-avermedia-cardbus" + * "rc-avermedia-dvbt" + * "rc-avermedia-m135a" + * "rc-avermedia-m733a-rm-k6" + * "rc-avermedia-rm-ks" + * "rc-avermedia" + * "rc-avertv-303" + * "rc-azurewave-ad-tu700" + * "rc-behold-columbus" + * "rc-behold" + * "rc-budget-ci-old" + * "rc-cec" + * "rc-cinergy-1400" + * "rc-cinergy" + * "rc-delock-61959" + * "rc-dib0700-nec" + * "rc-dib0700-rc5" + * "rc-digitalnow-tinytwin" + * "rc-digittrade" + * "rc-dm1105-nec" + * "rc-dntv-live-dvbt-pro" + * "rc-dntv-live-dvb-t" + * "rc-dtt200u" + * "rc-dvbsky" + * "rc-empty" + * "rc-em-terratec" + * "rc-encore-enltv2" + * "rc-encore-enltv-fm53" + * "rc-encore-enltv" + * "rc-evga-indtube" + * "rc-eztv" + * "rc-flydvb" + * "rc-flyvideo" + * "rc-fusionhdtv-mce" + * "rc-gadmei-rm008z" + * "rc-geekbox" + * "rc-genius-tvgo-a11mce" + * "rc-gotview7135" + * "rc-hauppauge" + * "rc-imon-mce" + * "rc-imon-pad" + * "rc-iodata-bctv7e" + * "rc-it913x-v1" + * "rc-it913x-v2" + * "rc-kaiomy" + * "rc-kworld-315u" + * "rc-kworld-pc150u" + * "rc-kworld-plus-tv-analog" + * "rc-leadtek-y04g0051" + * "rc-lirc" + * "rc-lme2510" + * "rc-manli" + * "rc-medion-x10" + * "rc-medion-x10-digitainer" + * "rc-medion-x10-or2x" + * "rc-msi-digivox-ii" + * "rc-msi-digivox-iii" + * "rc-msi-tvanywhere-plus" + * "rc-msi-tvanywhere" + * "rc-nebula" + * "rc-nec-terratec-cinergy-xs" + * "rc-norwood" + * "rc-npgtech" + * "rc-pctv-sedna" + * "rc-pinnacle-color" + * "rc-pinnacle-grey" + * "rc-pinnacle-pctv-hd" + * "rc-pixelview-new" + * "rc-pixelview" + * "rc-pixelview-002t" + * "rc-pixelview-mk12" + * "rc-powercolor-real-angel" + * "rc-proteus-2309" + * "rc-purpletv" + * "rc-pv951" + * "rc-hauppauge" + * "rc-rc5-tv" + * "rc-rc6-mce" + * "rc-real-audio-220-32-keys" + * "rc-reddo" + * "rc-snapstream-firefly" + * "rc-streamzap" + * "rc-tbs-nec" + * "rc-technisat-ts35" + * "rc-technisat-usb2" + * "rc-terratec-cinergy-c-pci" + * "rc-terratec-cinergy-s2-hd" + * "rc-terratec-cinergy-xs" + * "rc-terratec-slim" + * "rc-terratec-slim-2" + * "rc-tevii-nec" + * "rc-tivo" + * "rc-total-media-in-hand" + * "rc-total-media-in-hand-02" + * "rc-trekstor" + * "rc-tt-1500" + * "rc-twinhan-dtv-cab-ci" + * "rc-twinhan1027" + * "rc-videomate-k100" + * "rc-videomate-s350" + * "rc-videomate-tv-pvr" + * "rc-winfast" + * "rc-winfast-usbii-deluxe" + * "rc-su3000" diff --git a/Documentation/devicetree/bindings/media/st,st-delta.txt b/Documentation/devicetree/bindings/media/st,st-delta.txt new file mode 100644 index 000000000000..a538ab30a617 --- /dev/null +++ b/Documentation/devicetree/bindings/media/st,st-delta.txt @@ -0,0 +1,17 @@ +* STMicroelectronics DELTA multi-format video decoder + +Required properties: +- compatible: should be "st,st-delta". +- clocks: from common clock binding: handle hardware IP needed clocks, the + number of clocks may depend on the SoC type. + See ../clock/clock-bindings.txt for details. +- clock-names: names of the clocks listed in clocks property in the same order. + +Example: + delta0 { + compatible = "st,st-delta"; + clock-names = "delta", "delta-st231", "delta-flash-promip"; + clocks = <&clk_s_c0_flexgen CLK_VID_DMU>, + <&clk_s_c0_flexgen CLK_ST231_DMU>, + <&clk_s_c0_flexgen CLK_FLASH_PROMIP>; + }; diff --git a/Documentation/devicetree/bindings/media/sunxi-ir.txt b/Documentation/devicetree/bindings/media/sunxi-ir.txt index 1811a067c72c..302a0b183cb8 100644 --- a/Documentation/devicetree/bindings/media/sunxi-ir.txt +++ b/Documentation/devicetree/bindings/media/sunxi-ir.txt @@ -9,7 +9,7 @@ Required properties: - reg : should contain IO map address for IR. Optional properties: -- linux,rc-map-name : Remote control map name. +- linux,rc-map-name: see rc.txt file in the same directory. - resets : phandle + reset specifier pair Example: diff --git a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt new file mode 100644 index 000000000000..6d25d7f23d26 --- /dev/null +++ b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt @@ -0,0 +1,83 @@ +Texas Instruments VPIF +---------------------- + +The TI Video Port InterFace (VPIF) is the primary component for video +capture and display on the DA850/AM18x family of TI DaVinci/Sitara +SoCs. + +TI Document reference: SPRUH82C, Chapter 35 +http://www.ti.com/lit/pdf/spruh82 + +Required properties: +- compatible: must be "ti,da850-vpif" +- reg: physical base address and length of the registers set for the device; +- interrupts: should contain IRQ line for the VPIF + +Video Capture: + +VPIF has a 16-bit parallel bus input, supporting 2 8-bit channels or a +single 16-bit channel. It should contain at least one port child node +with child 'endpoint' node. Please refer to the bindings defined in +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example using 2 8-bit input channels, one of which is connected to an +I2C-connected TVP5147 decoder: + + vpif: vpif@217000 { + compatible = "ti,da850-vpif"; + reg = <0x217000 0x1000>; + interrupts = <92>; + + port { + vpif_ch0: endpoint@0 { + reg = <0>; + bus-width = <8>; + remote-endpoint = <&composite>; + }; + + vpif_ch1: endpoint@1 { + reg = <1>; + bus-width = <8>; + data-shift = <8>; + }; + }; + }; + +[ ... ] + +&i2c0 { + + tvp5147@5d { + compatible = "ti,tvp5147"; + reg = <0x5d>; + status = "okay"; + + port { + composite: endpoint { + hsync-active = <1>; + vsync-active = <1>; + pclk-sample = <0>; + + /* VPIF channel 0 (lower 8-bits) */ + remote-endpoint = <&vpif_ch0>; + bus-width = <8>; + }; + }; + }; +}; + + +Alternatively, an example when the bus is configured as a single +16-bit input (e.g. for raw-capture mode): + + vpif: vpif@217000 { + compatible = "ti,da850-vpif"; + reg = <0x217000 0x1000>; + interrupts = <92>; + + port { + vpif_ch0: endpoint { + bus-width = <16>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/as3722.txt b/Documentation/devicetree/bindings/mfd/as3722.txt index 4f64b2a73169..0b2a6099aa20 100644 --- a/Documentation/devicetree/bindings/mfd/as3722.txt +++ b/Documentation/devicetree/bindings/mfd/as3722.txt @@ -122,8 +122,7 @@ Following are properties of regulator subnode. Power-off: ========= -AS3722 supports the system power off by turning off all its rail. This -is provided through pm_power_off. +AS3722 supports the system power off by turning off all its rails. The device node should have the following properties to enable this functionality ams,system-power-controller: Boolean, to enable the power off functionality diff --git a/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt b/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt new file mode 100644 index 000000000000..aea5370efd97 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt @@ -0,0 +1,17 @@ +* Device tree bindings for Aspeed SoC Display Controller (GFX) + +The Aspeed SoC Display Controller primarily does as its name suggests, but also +participates in pinmux requests on the g5 SoCs. It is therefore considered a +syscon device. + +Required properties: +- compatible: "aspeed,ast2500-gfx", "syscon" +- reg: contains offset/length value of the GFX memory + region. + +Example: + +gfx: display@1e6e6000 { + compatible = "aspeed,ast2500-gfx", "syscon"; + reg = <0x1e6e6000 0x1000>; +}; diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt new file mode 100644 index 000000000000..514d82ced95b --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt @@ -0,0 +1,137 @@ +====================================================================== +Device tree bindings for the Aspeed Low Pin Count (LPC) Bus Controller +====================================================================== + +The LPC bus is a means to bridge a host CPU to a number of low-bandwidth +peripheral devices, replacing the use of the ISA bus in the age of PCI[0]. The +primary use case of the Aspeed LPC controller is as a slave on the bus +(typically in a Baseboard Management Controller SoC), but under certain +conditions it can also take the role of bus master. + +The LPC controller is represented as a multi-function device to account for the +mix of functionality it provides. The principle split is between the register +layout at the start of the I/O space which is, to quote the Aspeed datasheet, +"basically compatible with the [LPC registers from the] popular BMC controller +H8S/2168[1]", and everything else, where everything else is an eclectic +collection of functions with a esoteric register layout. "Everything else", +here labeled the "host" portion of the controller, includes, but is not limited +to: + +* An IPMI Block Transfer[2] Controller + +* An LPC Host Controller: Manages LPC functions such as host vs slave mode, the + physical properties of some LPC pins, configuration of serial IRQs, and + APB-to-LPC bridging amonst other functions. + +* An LPC Host Interface Controller: Manages functions exposed to the host such + as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART + management and bus snoop configuration. + +* A set of SuperIO[3] scratch registers: Enables implementation of e.g. custom + hardware management protocols for handover between the host and baseboard + management controller. + +Additionally the state of the LPC controller influences the pinmux +configuration, therefore the host portion of the controller is exposed as a +syscon as a means to arbitrate access. + +[0] http://www.intel.com/design/chipsets/industry/25128901.pdf +[1] https://www.renesas.com/en-sg/doc/products/mpumcu/001/rej09b0078_h8s2168.pdf?key=7c88837454702128622bee53acbda8f4 +[2] http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/ipmi-second-gen-interface-spec-v2-rev1-1.pdf +[3] https://en.wikipedia.org/wiki/Super_I/O + +Required properties +=================== + +- compatible: One of: + "aspeed,ast2400-lpc", "simple-mfd" + "aspeed,ast2500-lpc", "simple-mfd" + +- reg: contains the physical address and length values of the Aspeed + LPC memory region. + +- #address-cells: <1> +- #size-cells: <1> +- ranges: Maps 0 to the physical address and length of the LPC memory + region + +Required LPC Child nodes +======================== + +BMC Node +-------- + +- compatible: One of: + "aspeed,ast2400-lpc-bmc" + "aspeed,ast2500-lpc-bmc" + +- reg: contains the physical address and length values of the + H8S/2168-compatible LPC controller memory region + +Host Node +--------- + +- compatible: One of: + "aspeed,ast2400-lpc-host", "simple-mfd", "syscon" + "aspeed,ast2500-lpc-host", "simple-mfd", "syscon" + +- reg: contains the address and length values of the host-related + register space for the Aspeed LPC controller + +- #address-cells: <1> +- #size-cells: <1> +- ranges: Maps 0 to the address and length of the host-related LPC memory + region + +Example: + +lpc: lpc@1e789000 { + compatible = "aspeed,ast2500-lpc", "simple-mfd"; + reg = <0x1e789000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e789000 0x1000>; + + lpc_bmc: lpc-bmc@0 { + compatible = "aspeed,ast2500-lpc-bmc"; + reg = <0x0 0x80>; + }; + + lpc_host: lpc-host@80 { + compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"; + reg = <0x80 0x1e0>; + reg-io-width = <4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80 0x1e0>; + }; +}; + +Host Node Children +================== + +LPC Host Controller +------------------- + +The Aspeed LPC Host Controller configures the Low Pin Count (LPC) bus behaviour +between the host and the baseboard management controller. The registers exist +in the "host" portion of the Aspeed LPC controller, which must be the parent of +the LPC host controller node. + +Required properties: + +- compatible: One of: + "aspeed,ast2400-lhc"; + "aspeed,ast2500-lhc"; + +- reg: contains offset/length values of the LHC memory regions. In the + AST2400 and AST2500 there are two regions. + +Example: + +lhc: lhc@20 { + compatible = "aspeed,ast2500-lhc"; + reg = <0x20 0x24 0x48 0x8>; +}; diff --git a/Documentation/devicetree/bindings/mfd/mfd.txt b/Documentation/devicetree/bindings/mfd/mfd.txt index af9d6931a1a2..bcb6abb9d413 100644 --- a/Documentation/devicetree/bindings/mfd/mfd.txt +++ b/Documentation/devicetree/bindings/mfd/mfd.txt @@ -19,12 +19,22 @@ Optional properties: - compatible : "simple-mfd" - this signifies that the operating system should consider all subnodes of the MFD device as separate devices akin to how - "simple-bus" inidicates when to see subnodes as children for a simple + "simple-bus" indicates when to see subnodes as children for a simple memory-mapped bus. For more complex devices, when the nexus driver has to probe registers to figure out what child devices exist etc, this should not be used. In the latter case the child devices will be determined by the operating system. +- ranges: Describes the address mapping relationship to the parent. Should set + the child's base address to 0, the physical address within parent's address + space, and the length of the address map. + +- #address-cells: Specifies the number of cells used to represent physical base + addresses. Must be present if ranges is used. + +- #size-cells: Specifies the number of cells used to represent the size of an + address. Must be present if ranges is used. + Example: foo@1000 { diff --git a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt new file mode 100644 index 000000000000..15bc885f9df4 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt @@ -0,0 +1,31 @@ +Motorola CPCAP PMIC device tree binding + +Required properties: +- compatible : One or both of "motorola,cpcap" or "ste,6556002" +- reg : SPI chip select +- interrupt-parent : The parent interrupt controller +- interrupts : The interrupt line the device is connected to +- interrupt-controller : Marks the device node as an interrupt controller +- #interrupt-cells : The number of cells to describe an IRQ, should be 2 +- #address-cells : Child device offset number of cells, should be 1 +- #size-cells : Child device size number of cells, should be 0 +- spi-max-frequency : Typically set to 3000000 +- spi-cs-high : SPI chip select direction + +Example: + +&mcspi1 { + cpcap: pmic@0 { + compatible = "motorola,cpcap", "ste,6556002"; + reg = <0>; /* cs0 */ + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <3000000>; + spi-cs-high; + }; +}; + diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt index 949c85f8d02c..c568d52af5af 100644 --- a/Documentation/devicetree/bindings/mfd/mt6397.txt +++ b/Documentation/devicetree/bindings/mfd/mt6397.txt @@ -34,6 +34,10 @@ Optional subnodes: - clk Required properties: - compatible: "mediatek,mt6397-clk" +- led + Required properties: + - compatible: "mediatek,mt6323-led" + see Documentation/devicetree/bindings/leds/leds-mt6323.txt Example: pwrap: pwrap@1000f000 { diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt index 4721b2d521e4..aa1eaa59581b 100644 --- a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt +++ b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt @@ -64,8 +64,8 @@ Required properties if child node exists: Properties for children: The OMAP HS USB Host subsystem contains EHCI and OHCI controllers. -See Documentation/devicetree/bindings/usb/omap-ehci.txt and -omap3-ohci.txt +See Documentation/devicetree/bindings/usb/ehci-omap.txt and +Documentation/devicetree/bindings/usb/ohci-omap3.txt. Example for OMAP4: diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt index 485bc59fcc48..3c91ad430eea 100644 --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt @@ -234,7 +234,7 @@ see regulator.txt - with additional custom properties described below: - qcom,switch-mode-frequency: Usage: required Value type: <u32> - Definition: Frequency (Hz) of the swith mode power supply; + Definition: Frequency (Hz) of the switch mode power supply; must be one of: 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, 2740000, 2400000, 2130000, 1920000, 1750000, 1600000, diff --git a/Documentation/devicetree/bindings/mfd/stm32-timers.txt b/Documentation/devicetree/bindings/mfd/stm32-timers.txt new file mode 100644 index 000000000000..bbd083f5600a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/stm32-timers.txt @@ -0,0 +1,46 @@ +STM32 Timers driver bindings + +This IP provides 3 types of timer along with PWM functionality: +- advanced-control timers consist of a 16-bit auto-reload counter driven by a programmable + prescaler, break input feature, PWM outputs and complementary PWM ouputs channels. +- general-purpose timers consist of a 16-bit or 32-bit auto-reload counter driven by a + programmable prescaler and PWM outputs. +- basic timers consist of a 16-bit auto-reload counter driven by a programmable prescaler. + +Required parameters: +- compatible: must be "st,stm32-timers" + +- reg: Physical base address and length of the controller's + registers. +- clock-names: Set to "int". +- clocks: Phandle to the clock used by the timer module. + For Clk properties, please refer to ../clock/clock-bindings.txt + +Optional parameters: +- resets: Phandle to the parent reset controller. + See ../reset/st,stm32-rcc.txt + +Optional subnodes: +- pwm: See ../pwm/pwm-stm32.txt +- timer: See ../iio/timer/stm32-timer-trigger.txt + +Example: + timers@40010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40010000 0x400>; + clocks = <&rcc 0 160>; + clock-names = "clk_int"; + + pwm { + compatible = "st,stm32-pwm"; + pinctrl-0 = <&pwm1_pins>; + pinctrl-names = "default"; + }; + + timer@0 { + compatible = "st,stm32-timer-trigger"; + reg = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/mips/img/pistachio-marduk.txt b/Documentation/devicetree/bindings/mips/img/pistachio-marduk.txt new file mode 100644 index 000000000000..2d5126d529a2 --- /dev/null +++ b/Documentation/devicetree/bindings/mips/img/pistachio-marduk.txt @@ -0,0 +1,10 @@ +Imagination Technologies' Pistachio SoC based Marduk Board +========================================================== + +Compatible string must be "img,pistachio-marduk", "img,pistachio" + +Hardware and other related documentation is available at +https://docs.creatordev.io/ci40/ + +It is also known as Creator Ci40. Marduk is legacy name and will +be there for decades. diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt index efc98ea1f23d..f8629bb73945 100644 --- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt +++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt @@ -24,6 +24,8 @@ Optional properties: this parameter to choose where the clock from. - By default the clock is from TK pin, if the clock from RK pin, this property is needed. + - #sound-dai-cells: Should contain <0>. + - This property makes the SSC into an automatically registered DAI. Examples: - PDC transfer: diff --git a/Documentation/devicetree/bindings/misc/idt_89hpesx.txt b/Documentation/devicetree/bindings/misc/idt_89hpesx.txt new file mode 100644 index 000000000000..b9093b79ab7d --- /dev/null +++ b/Documentation/devicetree/bindings/misc/idt_89hpesx.txt @@ -0,0 +1,44 @@ +EEPROM / CSR SMBus-slave interface of IDT 89HPESx devices + +Required properties: + - compatible : should be "<manufacturer>,<type>" + Basically there is only one manufacturer: idt, but some + compatible devices may be produced in future. Following devices + are supported: 89hpes8nt2, 89hpes12nt3, 89hpes24nt6ag2, + 89hpes32nt8ag2, 89hpes32nt8bg2, 89hpes12nt12g2, 89hpes16nt16g2, + 89hpes24nt24g2, 89hpes32nt24ag2, 89hpes32nt24bg2; + 89hpes12n3, 89hpes12n3a, 89hpes24n3, 89hpes24n3a; + 89hpes32h8, 89hpes32h8g2, 89hpes48h12, 89hpes48h12g2, + 89hpes48h12ag2, 89hpes16h16, 89hpes22h16, 89hpes22h16g2, + 89hpes34h16, 89hpes34h16g2, 89hpes64h16, 89hpes64h16g2, + 89hpes64h16ag2; + 89hpes12t3g2, 89hpes24t3g2, 89hpes16t4, 89hpes4t4g2, + 89hpes10t4g2, 89hpes16t4g2, 89hpes16t4ag2, 89hpes5t5, + 89hpes6t5, 89hpes8t5, 89hpes8t5a, 89hpes24t6, 89hpes6t6g2, + 89hpes24t6g2, 89hpes16t7, 89hpes32t8, 89hpes32t8g2, + 89hpes48t12, 89hpes48t12g2. + - reg : I2C address of the IDT 89HPESx device. + +Optionally there can be EEPROM-compatible subnode: + - compatible: There are five EEPROM devices supported: 24c32, 24c64, 24c128, + 24c256 and 24c512 differed by size. + - reg: Custom address of EEPROM device (If not specified IDT 89HPESx + (optional) device will try to communicate with EEPROM sited by default + address - 0x50) + - read-only : Parameterless property disables writes to the EEPROM + (optional) + +Example: + idt@60 { + compatible = "idt,89hpes32nt8ag2"; + reg = <0x74>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "onsemi,24c64"; + reg = <0x50>; + read-only; + }; + }; + diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt index 7f95ec400863..50bf611a4d2c 100644 --- a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt +++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt @@ -17,7 +17,7 @@ Required properties: "core" - Main peripheral bus clock "clkin0" - Parent clock of internal mux "clkin1" - Other parent clock of internal mux - The driver has an interal mux clock which switches between clkin0 and clkin1 depending on the + The driver has an internal mux clock which switches between clkin0 and clkin1 depending on the clock rate requested by the MMC core. Example: diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt new file mode 100644 index 000000000000..22e9340e4ba2 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt @@ -0,0 +1,16 @@ +* Marvell SD8787 power sequence provider + +Required properties: +- compatible: must be "mmc-pwrseq-sd8787". +- powerdown-gpios: contains a power down GPIO specifier with the + default active state +- reset-gpios: contains a reset GPIO specifier with the default + active state + +Example: + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-sd8787"; + powerdown-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>; + reset-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>; + } diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index 8a377827695b..c7f4a0ec48ed 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -40,6 +40,7 @@ Optional properties: - cap-mmc-hw-reset: eMMC hardware reset is supported - cap-sdio-irq: enable SDIO IRQ signalling on this interface - full-pwr-cycle: full power cycle of the card is supported +- mmc-ddr-3_3v: eMMC high-speed DDR mode(3.3V I/O) is supported - mmc-ddr-1_8v: eMMC high-speed DDR mode(1.8V I/O) is supported - mmc-ddr-1_2v: eMMC high-speed DDR mode(1.2V I/O) is supported - mmc-hs200-1_8v: eMMC HS200 mode(1.8V I/O) is supported diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt index 3cd4c43a3260..230fd696eb92 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-st.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt @@ -38,7 +38,7 @@ Optional properties: - bus-width: Number of data lines. See: Documentation/devicetree/bindings/mmc/mmc.txt. -- max-frequency: Can be 200MHz, 100Mz or 50MHz (default) and used for +- max-frequency: Can be 200MHz, 100MHz or 50MHz (default) and used for configuring the CCONFIG3 in the mmcss. See: Documentation/devicetree/bindings/mmc/mmc.txt. diff --git a/Documentation/devicetree/bindings/mmc/sdhci.txt b/Documentation/devicetree/bindings/mmc/sdhci.txt index 1c95a1a555c3..0e9923a64024 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci.txt @@ -5,7 +5,7 @@ host controllers refer to the mmc[1] bindings. Optional properties: - sdhci-caps-mask: The sdhci capabilities register is incorrect. This 64bit - property corresponds to the bits in the sdhci capabilty register. If the bit + property corresponds to the bits in the sdhci capability register. If the bit is on in the mask then the bit is incorrect in the register and should be turned off, before applying sdhci-caps. - sdhci-caps: The sdhci capabilities register is incorrect. This 64bit diff --git a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt index 55cdd804cdba..7d53a799f140 100644 --- a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt +++ b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt @@ -13,6 +13,7 @@ Required properties: * "allwinner,sun5i-a13-mmc" * "allwinner,sun7i-a20-mmc" * "allwinner,sun9i-a80-mmc" + * "allwinner,sun50i-a64-emmc" * "allwinner,sun50i-a64-mmc" - reg : mmc controller base registers - clocks : a list with 4 phandle + clock specifier pairs diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt index 7fd17c3da116..9cb55ca57461 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt @@ -16,7 +16,7 @@ Required Properties: each child-node representing a supported slot. There should be atleast one child node representing a card slot. The name of the child node representing the slot is recommended to be slot@n where n is the unique number of the slot - connnected to the controller. The following are optional properties which + connected to the controller. The following are optional properties which can be included in the slot child node. * reg: specifies the physical slot number. The valid values of this @@ -75,6 +75,17 @@ Optional properties: * card-detect-delay: Delay in milli-seconds before detecting card after card insert event. The default value is 0. +* data-addr: Override fifo address with value provided by DT. The default FIFO reg + offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A) by + driver. If the controller does not follow this rule, please use this property + to set fifo address in device tree. + +* fifo-watermark-aligned: Data done irq is expected if data length is less than + watermark in PIO mode. But fifo watermark is requested to be aligned with data + length in some SoC so that TX/RX irq can be generated with data done irq. Add this + watermark quirk to mark this requirement and force fifo watermark setting + accordingly. + * vmmc-supply: The phandle to the regulator to use for vmmc. If this is specified we'll defer probe until we can find this regulator. @@ -102,6 +113,8 @@ board specific portions as listed below. interrupts = <0 75 0>; #address-cells = <1>; #size-cells = <0>; + data-addr = <0x200>; + fifo-watermark-aligned; resets = <&rst 20>; reset-names = "reset"; }; diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt index a1650edfd2b7..4fd8b7acc510 100644 --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt +++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt @@ -25,6 +25,19 @@ Required properties: "renesas,sdhi-r8a7795" - SDHI IP on R8A7795 SoC "renesas,sdhi-r8a7796" - SDHI IP on R8A7796 SoC +- clocks: Most controllers only have 1 clock source per channel. However, on + some variations of this controller, the internal card detection + logic that exists in this controller is sectioned off to be run by a + separate second clock source to allow the main core clock to be turned + off to save power. + If 2 clocks are specified by the hardware, you must name them as + "core" and "cd". If the controller only has 1 clock, naming is not + required. + Below is the number clocks for each supported SoC: + 1: SH73A0, R8A73A4, R8A7740, R8A7778, R8A7779, R8A7790 + R8A7791, R8A7792, R8A7793, R8A7794, R8A7795, R8A7796 + 2: R7S72100 + Optional properties: - toshiba,mmc-wrprotect-disable: write-protect detection is unavailable - pinctrl-names: should be "default", "state_uhs" diff --git a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt new file mode 100644 index 000000000000..eaade0e5adeb --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt @@ -0,0 +1,33 @@ +* ZTE specific extensions to the Synopsys Designware Mobile Storage + Host Controller + +The Synopsys designware mobile storage host controller is used to interface +a SoC with storage medium such as eMMC or SD/MMC cards. This file documents +differences between the core Synopsys dw mshc controller properties described +by synopsys-dw-mshc.txt and the properties used by the ZTE specific +extensions to the Synopsys Designware Mobile Storage Host Controller. + +Required Properties: + +* compatible: should be + - "zte,zx296718-dw-mshc": for ZX SoCs + +Example: + + mmc1: mmc@1110000 { + compatible = "zte,zx296718-dw-mshc"; + reg = <0x01110000 0x1000>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + fifo-depth = <32>; + data-addr = <0x200>; + fifo-watermark-aligned; + bus-width = <4>; + clock-frequency = <50000000>; + clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>; + clock-names = "biu", "ciu"; + num-slots = <1>; + max-frequency = <50000000>; + cap-sdio-irq; + cap-sd-highspeed; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/mtd/aspeed-smc.txt b/Documentation/devicetree/bindings/mtd/aspeed-smc.txt new file mode 100644 index 000000000000..49f6528ef547 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/aspeed-smc.txt @@ -0,0 +1,51 @@ +* Aspeed Firmware Memory controller +* Aspeed SPI Flash Memory Controller + +The Firmware Memory Controller in the Aspeed AST2500 SoC supports +three chip selects, two of which are always of SPI type and the third +can be SPI or NOR type flash. These bindings only describe SPI. + +The two SPI flash memory controllers in the AST2500 each support two +chip selects. + +Required properties: + - compatible : Should be one of + "aspeed,ast2400-fmc" for the AST2400 Firmware Memory Controller + "aspeed,ast2400-spi" for the AST2400 SPI Flash memory Controller + "aspeed,ast2500-fmc" for the AST2500 Firmware Memory Controller + "aspeed,ast2500-spi" for the AST2500 SPI flash memory controllers + + - reg : the first contains the control register location and length, + the second contains the memory window mapping address and length + - #address-cells : must be 1 corresponding to chip select child binding + - #size-cells : must be 0 corresponding to chip select child binding + +Optional properties: + - interrupts : Should contain the interrupt for the dma device if an + FMC + +The child nodes are the SPI flash modules which must have a compatible +property as specified in bindings/mtd/jedec,spi-nor.txt + +Optionally, the child node can contain properties for SPI mode (may be +ignored): + - spi-max-frequency - max frequency of spi bus + + +Example: +fmc: fmc@1e620000 { + compatible = "aspeed,ast2500-fmc"; + reg = < 0x1e620000 0x94 + 0x20000000 0x02000000 >; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <19>; + flash@0 { + reg = < 0 >; + compatible = "jedec,spi-nor"; + /* spi-max-frequency = <>; */ + /* m25p,fast-read; */ + #address-cells = <1>; + #size-cells = <1>; + }; +}; diff --git a/Documentation/devicetree/bindings/mtd/common.txt b/Documentation/devicetree/bindings/mtd/common.txt new file mode 100644 index 000000000000..fc068b923d7a --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/common.txt @@ -0,0 +1,15 @@ +* Common properties of all MTD devices + +Optional properties: +- label: user-defined MTD device name. Can be used to assign user + friendly names to MTD devices (instead of the flash model or flash + controller based name) in order to ease flash device identification + and/or describe what they are used for. + +Example: + + flash@0 { + label = "System-firmware"; + + /* flash type specific properties */ + }; diff --git a/Documentation/devicetree/bindings/mtd/cortina,gemini-flash.txt b/Documentation/devicetree/bindings/mtd/cortina,gemini-flash.txt new file mode 100644 index 000000000000..3fa1b34d69ad --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/cortina,gemini-flash.txt @@ -0,0 +1,24 @@ +Flash device on Cortina Systems Gemini SoC + +This flash is regular CFI compatible (Intel or AMD extended) flash chips with +some special bits that can be controlled by the machine's system controller. + +Required properties: +- compatible : must be "cortina,gemini-flash", "cfi-flash"; +- reg : memory address for the flash chip +- syscon : must be a phandle to the system controller +- bank-width : width in bytes of flash interface, should be <2> + +For the rest of the properties, see mtd-physmap.txt. + +The device tree may optionally contain sub-nodes describing partitions of the +address space. See partition.txt for more detail. + +Example: + +flash@30000000 { + compatible = "cortina,gemini-flash", "cfi-flash"; + reg = <0x30000000 0x01000000>; + syscon = <&syscon>; + bank-width = <2>; +}; diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt index 2c91c03e7eb0..3e920ec5c4d3 100644 --- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt +++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt @@ -14,6 +14,8 @@ Required properties: at25df641 at26df081a mr25h256 + mr25h10 + mr25h40 mx25l4005a mx25l1606e mx25l6405d diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt index fb314f09861b..5ded66ad7aef 100644 --- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt +++ b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt @@ -1,7 +1,13 @@ * Serial NOR flash controller for MTK MT81xx (and similar) Required properties: -- compatible: should be "mediatek,mt8173-nor"; +- compatible: The possible values are: + "mediatek,mt2701-nor" + "mediatek,mt7623-nor" + "mediatek,mt8173-nor" + For mt8173, compatible should be "mediatek,mt8173-nor". + For every other SoC, should contain both the SoC-specific compatible string + and "mediatek,mt8173-nor". - reg: physical base address and length of the controller's register - clocks: the phandle of the clocks needed by the nor controller - clock-names: the names of the clocks diff --git a/Documentation/devicetree/bindings/mtd/tango-nand.txt b/Documentation/devicetree/bindings/mtd/tango-nand.txt index ad5a02f2ac8c..cd1bf2ac9055 100644 --- a/Documentation/devicetree/bindings/mtd/tango-nand.txt +++ b/Documentation/devicetree/bindings/mtd/tango-nand.txt @@ -5,7 +5,7 @@ Required properties: - compatible: "sigma,smp8758-nand" - reg: address/size of nfc_reg, nfc_mem, and pbus_reg - dmas: reference to the DMA channel used by the controller -- dma-names: "nfc_sbox" +- dma-names: "rxtx" - clocks: reference to the system clock - #address-cells: <1> - #size-cells: <0> @@ -17,9 +17,9 @@ Example: nandc: nand-controller@2c000 { compatible = "sigma,smp8758-nand"; - reg = <0x2c000 0x30 0x2d000 0x800 0x20000 0x1000>; + reg = <0x2c000 0x30>, <0x2d000 0x800>, <0x20000 0x1000>; dmas = <&dma0 3>; - dma-names = "nfc_sbox"; + dma-names = "rxtx"; clocks = <&clkgen SYS_CLK>; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt index fb40891ee606..9a734d808aa7 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt +++ b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt @@ -2,7 +2,7 @@ Required properties: -- compatible: should be "brcm,bcm7445-switch-v4.0" +- compatible: should be "brcm,bcm7445-switch-v4.0" or "brcm,bcm7278-switch-v4.0" - reg: addresses and length of the register sets for the device, must be 6 pairs of register addresses and lengths - interrupts: interrupts for the devices, must be two interrupts @@ -41,6 +41,13 @@ Optional properties: Admission Control Block supports reporting the number of packets in-flight in a switch queue +Port subnodes: + +Optional properties: + +- brcm,use-bcm-hdr: boolean property, if present, indicates that the switch + port has Broadcom tags enabled (per-packet metadata) + Example: switch_top@f0b00000 { @@ -114,6 +121,7 @@ switch_top@f0b00000 { port@0 { label = "gphy"; reg = <0>; + brcm,use-bcm-hdr; }; ... }; diff --git a/Documentation/devicetree/bindings/net/brcm,systemport.txt b/Documentation/devicetree/bindings/net/brcm,systemport.txt index 877da34145b0..83f29e0e11ba 100644 --- a/Documentation/devicetree/bindings/net/brcm,systemport.txt +++ b/Documentation/devicetree/bindings/net/brcm,systemport.txt @@ -1,7 +1,10 @@ * Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT) Required properties: -- compatible: should be one of "brcm,systemport-v1.00" or "brcm,systemport" +- compatible: should be one of: + "brcm,systemport-v1.00" + "brcm,systemportlite-v1.00" or + "brcm,systemport" - reg: address and length of the register set for the device. - interrupts: interrupts for the device, first cell must be for the rx interrupts, and the second cell should be for the transmit queues. An diff --git a/Documentation/devicetree/bindings/net/btusb.txt b/Documentation/devicetree/bindings/net/btusb.txt new file mode 100644 index 000000000000..01fa2d4188d4 --- /dev/null +++ b/Documentation/devicetree/bindings/net/btusb.txt @@ -0,0 +1,43 @@ +Generic Bluetooth controller over USB (btusb driver) +--------------------------------------------------- + +Required properties: + + - compatible : should comply with the format "usbVID,PID" specified in + Documentation/devicetree/bindings/usb/usb-device.txt + At the time of writing, the only OF supported devices + (more may be added later) are: + + "usb1286,204e" (Marvell 8997) + +Also, vendors that use btusb may have device additional properties, e.g: +Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt + +Optional properties: + + - interrupt-parent: phandle of the parent interrupt controller + - interrupt-names: (see below) + - interrupts : The interrupt specified by the name "wakeup" is the interrupt + that shall be used for out-of-band wake-on-bt. Driver will + request this interrupt for wakeup. During system suspend, the + irq will be enabled so that the bluetooth chip can wakeup host + platform out of band. During system resume, the irq will be + disabled to make sure unnecessary interrupt is not received. + +Example: + +Following example uses irq pin number 3 of gpio0 for out of band wake-on-bt: + +&usb_host1_ehci { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + mvl_bt1: bt@1 { + compatible = "usb1286,204e"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupt-name = "wakeup"; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt index ebda7c93453a..7cc15c96ea95 100644 --- a/Documentation/devicetree/bindings/net/cpsw.txt +++ b/Documentation/devicetree/bindings/net/cpsw.txt @@ -23,7 +23,6 @@ Required properties: Optional properties: - ti,hwmods : Must be "cpgmac0" -- no_bd_ram : Must be 0 or 1 - dual_emac : Specifies Switch to act as Dual EMAC - syscon : Phandle to the system control device node, which is the control module device of the am33x @@ -70,7 +69,6 @@ Examples: cpdma_channels = <8>; ale_entries = <1024>; bd_ram_size = <0x2000>; - no_bd_ram = <0>; rx_descs = <64>; mac_control = <0x20>; slaves = <2>; @@ -99,7 +97,6 @@ Examples: cpdma_channels = <8>; ale_entries = <1024>; bd_ram_size = <0x2000>; - no_bd_ram = <0>; rx_descs = <64>; mac_control = <0x20>; slaves = <2>; diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt index a4a570fb2494..cfe8f64eca4f 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.txt +++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt @@ -34,13 +34,9 @@ Required properties: Each port children node must have the following mandatory properties: - reg : Describes the port address in the switch -- label : Describes the label associated with this port, which - will become the netdev name. Special labels are - "cpu" to indicate a CPU port and "dsa" to - indicate an uplink/downlink port between switches in - the cluster. -A port labelled "dsa" has the following mandatory property: +An uplink/downlink port between switches in the cluster has the following +mandatory property: - link : Should be a list of phandles to other switch's DSA port. This port is used as the outgoing port @@ -48,12 +44,17 @@ A port labelled "dsa" has the following mandatory property: information must be given, not just the one hop routes to neighbouring switches. -A port labelled "cpu" has the following mandatory property: +A CPU port has the following mandatory property: - ethernet : Should be a phandle to a valid Ethernet device node. This host device is what the switch port is connected to. +A user port has the following optional property: + +- label : Describes the label associated with this port, which + will become the netdev name. + Port child nodes may also contain the following optional standardised properties, described in binding documents: @@ -107,7 +108,6 @@ linked into one DSA cluster. switch0port5: port@5 { reg = <5>; - label = "dsa"; phy-mode = "rgmii-txid"; link = <&switch1port6 &switch2port9>; @@ -119,7 +119,6 @@ linked into one DSA cluster. port@6 { reg = <6>; - label = "cpu"; ethernet = <&fec1>; fixed-link { speed = <100>; @@ -165,7 +164,6 @@ linked into one DSA cluster. switch1port5: port@5 { reg = <5>; - label = "dsa"; link = <&switch2port9>; phy-mode = "rgmii-txid"; fixed-link { @@ -176,7 +174,6 @@ linked into one DSA cluster. switch1port6: port@6 { reg = <6>; - label = "dsa"; phy-mode = "rgmii-txid"; link = <&switch0port5>; fixed-link { @@ -255,7 +252,6 @@ linked into one DSA cluster. switch2port9: port@9 { reg = <9>; - label = "dsa"; phy-mode = "rgmii-txid"; link = <&switch1port5 &switch0port5>; diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt index b3dd6b40e0de..7ef9dbb08957 100644 --- a/Documentation/devicetree/bindings/net/dsa/marvell.txt +++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt @@ -14,9 +14,9 @@ The properties described here are those specific to Marvell devices. Additional required and optional properties can be found in dsa.txt. Required properties: -- compatible : Should be one of "marvell,mv88e6085" or - "marvell,mv88e6190" -- reg : Address on the MII bus for the switch. +- compatible : Should be one of "marvell,mv88e6085" or + "marvell,mv88e6190" +- reg : Address on the MII bus for the switch. Optional properties: @@ -26,30 +26,67 @@ Optional properties: - interrupt-controller : Indicates the switch is itself an interrupt controller. This is used for the PHY interrupts. #interrupt-cells = <2> : Controller uses two cells, number and flag -- mdio : container of PHY and devices on the switches MDIO - bus +- mdio : Container of PHY and devices on the switches MDIO + bus. +- mdio? : Container of PHYs and devices on the external MDIO + bus. The node must contains a compatible string of + "marvell,mv88e6xxx-mdio-external" + Example: - mdio { - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&gpio0>; - interrupts = <27 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - - switch0: switch@0 { - compatible = "marvell,mv88e6085"; - reg = <0>; - reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - }; - mdio { - #address-cells = <1>; - #size-cells = <0>; - switch1phy0: switch1phy0@0 { - reg = <0>; - interrupt-parent = <&switch0>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - }; + mdio { + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + switch0: switch@0 { + compatible = "marvell,mv88e6085"; + reg = <0>; + reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + }; + mdio { + #address-cells = <1>; + #size-cells = <0>; + switch1phy0: switch1phy0@0 { + reg = <0>; + interrupt-parent = <&switch0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + switch0: switch@0 { + compatible = "marvell,mv88e6390"; + reg = <0>; + reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + }; + mdio { + #address-cells = <1>; + #size-cells = <0>; + switch1phy0: switch1phy0@0 { + reg = <0>; + interrupt-parent = <&switch0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + mdio1 { + compatible = "marvell,mv88e6xxx-mdio-external"; + #address-cells = <1>; + #size-cells = <0>; + switch1phy9: switch1phy0@9 { + reg = <9>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt index 05150957ecfd..3a6916909d90 100644 --- a/Documentation/devicetree/bindings/net/ethernet.txt +++ b/Documentation/devicetree/bindings/net/ethernet.txt @@ -29,6 +29,9 @@ The following properties are common to the Ethernet controllers: * "smii" * "xgmii" * "trgmii" + * "2000base-x", + * "2500base-x", + * "rxaui" - phy-connection-type: the same as "phy-mode" property but described in ePAPR; - phy-handle: phandle, specifies a reference to a node representing a PHY device; this property is described in ePAPR and so preferred; diff --git a/Documentation/devicetree/bindings/net/marvell,prestera.txt b/Documentation/devicetree/bindings/net/marvell,prestera.txt new file mode 100644 index 000000000000..5fbab29718e8 --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell,prestera.txt @@ -0,0 +1,50 @@ +Marvell Prestera Switch Chip bindings +------------------------------------- + +Required properties: +- compatible: one of the following + "marvell,prestera-98dx3236", + "marvell,prestera-98dx3336", + "marvell,prestera-98dx4251", +- reg: address and length of the register set for the device. +- interrupts: interrupt for the device + +Optional properties: +- dfx: phandle reference to the "DFX Server" node + +Example: + +switch { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>; + + packet-processor@0 { + compatible = "marvell,prestera-98dx3236"; + reg = <0 0x4000000>; + interrupts = <33>, <34>, <35>; + dfx = <&dfx>; + }; +}; + +DFX Server bindings +------------------- + +Required properties: +- compatible: must be "marvell,dfx-server" +- reg: address and length of the register set for the device. + +Example: + +dfx-registers { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>; + + dfx: dfx@0 { + compatible = "marvell,dfx-server"; + reg = <0 0x100000>; + }; +}; diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt index 7aa840c8768d..ae4234ca4ee4 100644 --- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt +++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt @@ -1,7 +1,7 @@ * Marvell Armada 370 / Armada XP / Armada 3700 Ethernet Controller (NETA) Required properties: -- compatible: could be one of the followings +- compatible: could be one of the following: "marvell,armada-370-neta" "marvell,armada-xp-neta" "marvell,armada-3700-neta" diff --git a/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt index 6a9a63cb0543..9be1059ff03f 100644 --- a/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt +++ b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt @@ -1,16 +1,21 @@ -Marvell 8897/8997 (sd8897/sd8997) bluetooth SDIO devices +Marvell 8897/8997 (sd8897/sd8997) bluetooth devices (SDIO or USB based) ------ +The 8997 devices supports multiple interfaces. When used on SDIO interfaces, +the btmrvl driver is used and when used on USB interface, the btusb driver is +used. Required properties: - compatible : should be one of the following: - * "marvell,sd8897-bt" - * "marvell,sd8997-bt" + * "marvell,sd8897-bt" (for SDIO) + * "marvell,sd8997-bt" (for SDIO) + * "usb1286,204e" (for USB) Optional properties: - marvell,cal-data: Calibration data downloaded to the device during initialization. This is an array of 28 values(u8). + This is only applicable to SDIO devices. - marvell,wakeup-pin: It represents wakeup pin number of the bluetooth chip. firmware will use the pin to wakeup host system (u16). @@ -18,10 +23,15 @@ Optional properties: platform. The value will be configured to firmware. This is needed to work chip's sleep feature as expected (u16). - interrupt-parent: phandle of the parent interrupt controller - - interrupts : interrupt pin number to the cpu. Driver will request an irq based - on this interrupt number. During system suspend, the irq will be - enabled so that the bluetooth chip can wakeup host platform under - certain condition. During system resume, the irq will be disabled + - interrupt-names: Used only for USB based devices (See below) + - interrupts : specifies the interrupt pin number to the cpu. For SDIO, the + driver will use the first interrupt specified in the interrupt + array. For USB based devices, the driver will use the interrupt + named "wakeup" from the interrupt-names and interrupt arrays. + The driver will request an irq based on this interrupt number. + During system suspend, the irq will be enabled so that the + bluetooth chip can wakeup host platform under certain + conditions. During system resume, the irq will be disabled to make sure unnecessary interrupt is not received. Example: @@ -29,7 +39,9 @@ Example: IRQ pin 119 is used as system wakeup source interrupt. wakeup pin 13 and gap 100ms are configured so that firmware can wakeup host using this device side pin and wakeup latency. -calibration data is also available in below example. + +Example for SDIO device follows (calibration data is also available in +below example). &mmc3 { status = "okay"; @@ -54,3 +66,21 @@ calibration data is also available in below example. marvell,wakeup-gap-ms = /bits/ 16 <0x64>; }; }; + +Example for USB device: + +&usb_host1_ohci { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + mvl_bt1: bt@1 { + compatible = "usb1286,204e"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupt-names = "wakeup"; + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; + marvell,wakeup-pin = /bits/ 16 <0x0d>; + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; + }; +}; diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt index aa4f4230bfd7..4754364df4c6 100644 --- a/Documentation/devicetree/bindings/net/marvell-pp2.txt +++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt @@ -27,9 +27,7 @@ Optional properties (port): - marvell,loopback: port is loopback mode - phy: a phandle to a phy node defining the PHY address (as the reg - property, a single integer). Note: if this property isn't present, - then fixed link is assumed, and the 'fixed-link' property is - mandatory. + property, a single integer). Example: diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt index c010fafc66a8..c7194e87d5f4 100644 --- a/Documentation/devicetree/bindings/net/mediatek-net.txt +++ b/Documentation/devicetree/bindings/net/mediatek-net.txt @@ -7,7 +7,7 @@ have dual GMAC each represented by a child node.. * Ethernet controller node Required properties: -- compatible: Should be "mediatek,mt7623-eth" +- compatible: Should be "mediatek,mt2701-eth" - reg: Address and length of the register set for the device - interrupts: Should contain the three frame engines interrupts in numeric order. These are fe_int0, fe_int1 and fe_int2. diff --git a/Documentation/devicetree/bindings/net/meson-dwmac.txt b/Documentation/devicetree/bindings/net/meson-dwmac.txt index 89e62ddc69ca..0703ad3f3c1e 100644 --- a/Documentation/devicetree/bindings/net/meson-dwmac.txt +++ b/Documentation/devicetree/bindings/net/meson-dwmac.txt @@ -25,6 +25,22 @@ Required properties on Meson8b and newer: - "clkin0" - first parent clock of the internal mux - "clkin1" - second parent clock of the internal mux +Optional properties on Meson8b and newer: +- amlogic,tx-delay-ns: The internal RGMII TX clock delay (provided + by this driver) in nanoseconds. Allowed values + are: 0ns, 2ns, 4ns, 6ns. + When phy-mode is set to "rgmii" then the TX + delay should be explicitly configured. When + not configured a fallback of 2ns is used. + When the phy-mode is set to either "rgmii-id" + or "rgmii-txid" the TX clock delay is already + provided by the PHY. In that case this + property should be set to 0ns (which disables + the TX clock delay in the MAC to prevent the + clock from going off because both PHY and MAC + are adding a delay). + Any configuration is ignored when the phy-mode + is set to "rmii". Example for Meson6: diff --git a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt index bdefefc66594..0eedabe22cc3 100644 --- a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt +++ b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt @@ -27,6 +27,14 @@ Optional properties: 'vddmac'. Default value is 0%. Ref: Table:1 - Edge rate change (below). +- vsc8531,led-0-mode : LED mode. Specify how the LED[0] should behave. + Allowed values are define in + "include/dt-bindings/net/mscc-phy-vsc8531.h". + Default value is VSC8531_LINK_1000_ACTIVITY (1). +- vsc8531,led-1-mode : LED mode. Specify how the LED[1] should behave. + Allowed values are define in + "include/dt-bindings/net/mscc-phy-vsc8531.h". + Default value is VSC8531_LINK_100_ACTIVITY (2). Table: 1 - Edge rate change ----------------------------------------------------------------| @@ -60,4 +68,6 @@ Example: compatible = "ethernet-phy-id0007.0570"; vsc8531,vddmac = <3300>; vsc8531,edge-slowdown = <7>; + vsc8531,led-0-mode = <LINK_1000_ACTIVITY>; + vsc8531,led-1-mode = <LINK_100_ACTIVITY>; }; diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt index ff1bc4b1bb3b..b55857696fc3 100644 --- a/Documentation/devicetree/bindings/net/phy.txt +++ b/Documentation/devicetree/bindings/net/phy.txt @@ -19,8 +19,9 @@ Optional Properties: specifications. If neither of these are specified, the default is to assume clause 22. - If the phy's identifier is known then the list may contain an entry - of the form: "ethernet-phy-idAAAA.BBBB" where + If the PHY reports an incorrect ID (or none at all) then the + "compatible" list may contain an entry with the correct PHY ID in the + form: "ethernet-phy-idAAAA.BBBB" where AAAA - The value of the 16 bit Phy Identifier 1 register as 4 hex digits. This is the chip vendor OUI bits 3:18 BBBB - The value of the 16 bit Phy Identifier 2 register as @@ -38,6 +39,10 @@ Optional Properties: - enet-phy-lane-swap: If set, indicates the PHY will swap the TX/RX lanes to compensate for the board being designed with the lanes swapped. +- enet-phy-lane-no-swap: If set, indicates that PHY will disable swap of the + TX/RX lanes. This property allows the PHY to work correcly after e.g. wrong + bootstrap configuration caused by issues in PCB layout design. + - eee-broken-100tx: - eee-broken-1000t: - eee-broken-10gt: diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt index 95383c5131fc..8f427550720a 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt @@ -6,6 +6,7 @@ Required properties: - compatible: should be "rockchip,<name>-gamc" "rockchip,rk3228-gmac": found on RK322x SoCs "rockchip,rk3288-gmac": found on RK3288 SoCs + "rockchip,rk3328-gmac": found on RK3328 SoCs "rockchip,rk3366-gmac": found on RK3366 SoCs "rockchip,rk3368-gmac": found on RK3368 SoCs "rockchip,rk3399-gmac": found on RK3399 SoCs diff --git a/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt b/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt index d93f71ce8346..21d27aa4c68c 100644 --- a/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt +++ b/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt @@ -1,5 +1,8 @@ * Synopsys DWC Ethernet QoS IP version 4.10 driver (GMAC) +This binding is deprecated, but it continues to be supported, but new +features should be preferably added to the stmmac binding document. + This binding supports the Synopsys Designware Ethernet QoS (Quality Of Service) IP block. The IP supports multiple options for bus type, clocking and reset structure, and feature list. Consequently, a number of properties and list diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index 128da752fec9..d3bfc2b30fb5 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -49,6 +49,8 @@ Optional properties: - snps,force_sf_dma_mode Force DMA to use the Store and Forward mode for both tx and rx. This flag is ignored if force_thresh_dma_mode is set. +- snps,en-tx-lpi-clockgating Enable gating of the MAC TX clock during + TX low-power mode - snps,multicast-filter-bins: Number of multicast filter hash bins supported by this device instance - snps,perfect-filter-entries: Number of perfect filter entries supported @@ -65,7 +67,6 @@ Optional properties: - snps,wr_osr_lmt: max write outstanding req. limit - snps,rd_osr_lmt: max read outstanding req. limit - snps,kbbe: do not cross 1KiB boundary. - - snps,axi_all: align address - snps,blen: this is a vector of supported burst length. - snps,fb: fixed-burst - snps,mb: mixed-burst diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt index 85bf945b898f..afe9630a5e7d 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83867.txt +++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt @@ -3,9 +3,11 @@ Required properties: - reg - The ID number for the phy, usually a small integer - ti,rx-internal-delay - RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h - for applicable values + for applicable values. Required only if interface type is + PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID - ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h - for applicable values + for applicable values. Required only if interface type is + PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_TXID - ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable values diff --git a/Documentation/devicetree/bindings/net/wireless/ieee80211.txt b/Documentation/devicetree/bindings/net/wireless/ieee80211.txt new file mode 100644 index 000000000000..f6442b1397f5 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/ieee80211.txt @@ -0,0 +1,24 @@ +Common IEEE 802.11 properties + +This provides documentation of common properties that are valid for all wireless +devices. + +Optional properties: + - ieee80211-freq-limit : list of supported frequency ranges in KHz. This can be + used for devices that in a given config support less channels than + normally. It may happen chipset supports a wide wireless band but it is + limited to some part of it due to used antennas or power amplifier. + An example case for this can be tri-band wireless router with two + identical chipsets used for two different 5 GHz subbands. Using them + incorrectly could not work or decrease performance noticeably. + +Example: + +pcie@0,0 { + reg = <0x0000 0 0 0 0>; + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + ieee80211-freq-limit = <2402000 2482000>, + <5170000 5250000>; + }; +}; diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt index 980b16df74c3..0854451ff91d 100644 --- a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt +++ b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt @@ -1,4 +1,4 @@ -Marvell 8897/8997 (sd8897/sd8997/pcie8997) SDIO/PCIE devices +Marvell 8787/8897/8997 (sd8787/sd8897/sd8997/pcie8997) SDIO/PCIE devices ------ This node provides properties for controlling the Marvell SDIO/PCIE wireless device. @@ -8,6 +8,7 @@ connects the device to the system. Required properties: - compatible : should be one of the following: + * "marvell,sd8787" * "marvell,sd8897" * "marvell,sd8997" * "pci11ab,2b42" @@ -34,6 +35,9 @@ Optional properties: so that the wifi chip can wakeup host platform under certain condition. during system resume, the irq will be disabled to make sure unnecessary interrupt is not received. + - vmmc-supply: a phandle of a regulator, supplying VCC to the card + - mmc-pwrseq: phandle to the MMC power sequence node. See "mmc-pwrseq-*" + for documentation of MMC power sequence bindings. Example: @@ -46,6 +50,7 @@ so that firmware can wakeup host using this device side pin. &mmc3 { status = "okay"; vmmc-supply = <&wlan_en_reg>; + mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; cap-power-off-card; keep-power-in-suspend; diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt index 383d5889e95a..966a72ecc6bd 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt @@ -1,13 +1,15 @@ Freescale i.MX6 On-Chip OTP Controller (OCOTP) device tree bindings This binding represents the on-chip eFuse OTP controller found on -i.MX6Q/D, i.MX6DL/S, i.MX6SL, and i.MX6SX SoCs. +i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX and i.MX6UL SoCs. Required properties: - compatible: should be one of "fsl,imx6q-ocotp" (i.MX6Q/D/DL/S), "fsl,imx6sl-ocotp" (i.MX6SL), or - "fsl,imx6sx-ocotp" (i.MX6SX), followed by "syscon". + "fsl,imx6sx-ocotp" (i.MX6SX), + "fsl,imx6ul-ocotp" (i.MX6UL), + followed by "syscon". - reg: Should contain the register base and length. - clocks: Should contain a phandle pointing to the gated peripheral clock. diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt index 9f5ca4457b5f..63725498bd20 100644 --- a/Documentation/devicetree/bindings/opp/opp.txt +++ b/Documentation/devicetree/bindings/opp/opp.txt @@ -136,7 +136,7 @@ Optional properties: larger OPP table, based on what version of the hardware we are running on. We still can't have multiple nodes with the same opp-hz value in OPP table. - It's an user defined array containing a hierarchy of hardware version numbers, + It's a user defined array containing a hierarchy of hardware version numbers, supported by the OPP. For example: a platform with hierarchy of three levels of versions (A, B and C), this field should be like <X Y Z>, where X corresponds to Version hierarchy A, Y corresponds to version hierarchy B and Z @@ -188,14 +188,14 @@ Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together. opp@1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <970000 975000 985000>; + opp-microvolt = <975000 970000 985000>; opp-microamp = <70000>; clock-latency-ns = <300000>; opp-suspend; }; opp@1100000000 { opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <980000 1000000 1010000>; + opp-microvolt = <1000000 980000 1010000>; opp-microamp = <80000>; clock-latency-ns = <310000>; }; @@ -267,14 +267,14 @@ independently. opp@1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <970000 975000 985000>; + opp-microvolt = <975000 970000 985000>; opp-microamp = <70000>; clock-latency-ns = <300000>; opp-suspend; }; opp@1100000000 { opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <980000 1000000 1010000>; + opp-microvolt = <1000000 980000 1010000>; opp-microamp = <80000>; clock-latency-ns = <310000>; }; @@ -343,14 +343,14 @@ DVFS state together. opp@1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <970000 975000 985000>; + opp-microvolt = <975000 970000 985000>; opp-microamp = <70000>; clock-latency-ns = <300000>; opp-suspend; }; opp@1100000000 { opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <980000 1000000 1010000>; + opp-microvolt = <1000000 980000 1010000>; opp-microamp = <80000>; clock-latency-ns = <310000>; }; @@ -369,7 +369,7 @@ DVFS state together. opp@1300000000 { opp-hz = /bits/ 64 <1300000000>; - opp-microvolt = <1045000 1050000 1055000>; + opp-microvolt = <1050000 1045000 1055000>; opp-microamp = <95000>; clock-latency-ns = <400000>; opp-suspend; @@ -382,7 +382,7 @@ DVFS state together. }; opp@1500000000 { opp-hz = /bits/ 64 <1500000000>; - opp-microvolt = <1010000 1100000 1110000>; + opp-microvolt = <1100000 1010000 1110000>; opp-microamp = <95000>; clock-latency-ns = <400000>; turbo-mode; @@ -424,9 +424,9 @@ Example 4: Handling multiple regulators opp@1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <970000 975000 985000>, /* Supply 0 */ - <960000 965000 975000>, /* Supply 1 */ - <960000 965000 975000>; /* Supply 2 */ + opp-microvolt = <975000 970000 985000>, /* Supply 0 */ + <965000 960000 975000>, /* Supply 1 */ + <965000 960000 975000>; /* Supply 2 */ opp-microamp = <70000>, /* Supply 0 */ <70000>, /* Supply 1 */ <70000>; /* Supply 2 */ @@ -437,9 +437,9 @@ Example 4: Handling multiple regulators opp@1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <970000 975000 985000>, /* Supply 0 */ - <960000 965000 975000>, /* Supply 1 */ - <960000 965000 975000>; /* Supply 2 */ + opp-microvolt = <975000 970000 985000>, /* Supply 0 */ + <965000 960000 975000>, /* Supply 1 */ + <965000 960000 975000>; /* Supply 2 */ opp-microamp = <70000>, /* Supply 0 */ <0>, /* Supply 1 doesn't need this */ <70000>; /* Supply 2 */ @@ -474,7 +474,7 @@ Example 5: opp-supported-hw */ opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF> opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <900000 915000 925000>; + opp-microvolt = <915000 900000 925000>; ... }; @@ -487,7 +487,7 @@ Example 5: opp-supported-hw */ opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0> opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <900000 915000 925000>; + opp-microvolt = <915000 900000 925000>; ... }; }; @@ -512,18 +512,18 @@ Example 6: opp-microvolt-<name>, opp-microamp-<name>: opp@1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt-slow = <900000 915000 925000>; - opp-microvolt-fast = <970000 975000 985000>; + opp-microvolt-slow = <915000 900000 925000>; + opp-microvolt-fast = <975000 970000 985000>; opp-microamp-slow = <70000>; opp-microamp-fast = <71000>; }; opp@1200000000 { opp-hz = /bits/ 64 <1200000000>; - opp-microvolt-slow = <900000 915000 925000>, /* Supply vcc0 */ - <910000 925000 935000>; /* Supply vcc1 */ - opp-microvolt-fast = <970000 975000 985000>, /* Supply vcc0 */ - <960000 965000 975000>; /* Supply vcc1 */ + opp-microvolt-slow = <915000 900000 925000>, /* Supply vcc0 */ + <925000 910000 935000>; /* Supply vcc1 */ + opp-microvolt-fast = <975000 970000 985000>, /* Supply vcc0 */ + <965000 960000 975000>; /* Supply vcc1 */ opp-microamp = <70000>; /* Will be used for both slow/fast */ }; }; diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt index 59c2f47aa303..b7fa3b97986d 100644 --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt @@ -42,3 +42,40 @@ Hip05 Example (note that Hip06 is the same except compatible): 0x0 0 0 4 &mbigen_pcie 4 13>; status = "ok"; }; + +HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description. +The properties and their meanings are identical to those described in +host-generic-pci.txt except as listed below. + +Properties of the host controller node that differ from +host-generic-pci.txt: + +- compatible : Must be "hisilicon,pcie-almost-ecam" + +- reg : Two entries: First the ECAM configuration space for any + other bus underneath the root bus. Second, the base + and size of the HiSilicon host bridge registers include + the RC's own config space. + +Example: + pcie0: pcie@a0090000 { + compatible = "hisilicon,pcie-almost-ecam"; + reg = <0 0xb0000000 0 0x2000000>, /* ECAM configuration space */ + <0 0xa0090000 0 0x10000>; /* host bridge registers */ + bus-range = <0 31>; + msi-map = <0x0000 &its_dsa 0x0000 0x2000>; + msi-map-mask = <0xffff>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + ranges = <0x02000000 0 0xb2000000 0x0 0xb2000000 0 0x5ff0000 + 0x01000000 0 0 0 0xb7ff0000 0 0x10000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0x0 0 0 1 &mbigen_pcie0 650 4 + 0x0 0 0 2 &mbigen_pcie0 650 4 + 0x0 0 0 3 &mbigen_pcie0 650 4 + 0x0 0 0 4 &mbigen_pcie0 650 4>; + status = "ok"; + }; diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt index 08c716b2c6b6..2de6f65ecfb1 100644 --- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt +++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt @@ -78,7 +78,8 @@ and the following optional properties: multiple lanes. If this property is not found, we assume that the value is 0. - reset-gpios: optional gpio to PERST# -- reset-delay-us: delay in us to wait after reset de-assertion +- reset-delay-us: delay in us to wait after reset de-assertion, if not + specified will default to 100ms, as required by the PCIe specification. Example: diff --git a/Documentation/devicetree/bindings/pci/pci-iommu.txt b/Documentation/devicetree/bindings/pci/pci-iommu.txt index 56c829621b9a..0def586fdcdf 100644 --- a/Documentation/devicetree/bindings/pci/pci-iommu.txt +++ b/Documentation/devicetree/bindings/pci/pci-iommu.txt @@ -32,17 +32,17 @@ PCI root complex Optional properties ------------------- -- iommu-map: Maps a Requester ID to an IOMMU and associated iommu-specifier +- iommu-map: Maps a Requester ID to an IOMMU and associated IOMMU specifier data. The property is an arbitrary number of tuples of (rid-base,iommu,iommu-base,length). Any RID r in the interval [rid-base, rid-base + length) is associated with - the listed IOMMU, with the iommu-specifier (r - rid-base + iommu-base). + the listed IOMMU, with the IOMMU specifier (r - rid-base + iommu-base). - iommu-map-mask: A mask to be applied to each Requester ID prior to being - mapped to an iommu-specifier per the iommu-map property. + mapped to an IOMMU specifier per the iommu-map property. Example (1) diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt index eee518db90b9..34712d6fd253 100644 --- a/Documentation/devicetree/bindings/pci/rcar-pci.txt +++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt @@ -6,6 +6,7 @@ compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC; "renesas,pcie-r8a7791" for the R8A7791 SoC; "renesas,pcie-r8a7793" for the R8A7793 SoC; "renesas,pcie-r8a7795" for the R8A7795 SoC; + "renesas,pcie-r8a7796" for the R8A7796 SoC; "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 compatible device. "renesas,pcie-rcar-gen3" for a generic R-Car Gen3 compatible device. diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt index 71aeda1ca055..1453a734c2f5 100644 --- a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt +++ b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt @@ -43,6 +43,8 @@ Required properties: - interrupt-map-mask and interrupt-map: standard PCI properties Optional Property: +- aspm-no-l0s: RC won't support ASPM L0s. This property is needed if + using 24MHz OSC for RC's PHY. - ep-gpios: contain the entry for pre-reset gpio - num-lanes: number of lanes to use - vpcie3v3-supply: The phandle to the 3.3v regulator to use for PCIe. diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt b/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt index 4f9d23d2ed67..7d3b09474657 100644 --- a/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt +++ b/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt @@ -7,8 +7,19 @@ Required properties: - compatible: "samsung,exynos5440-pcie" - reg: base addresses and lengths of the pcie controller, the phy controller, additional register for the phy controller. + (Registers for the phy controller are DEPRECATED. + Use the PHY framework.) +- reg-names : First name should be set to "elbi". + And use the "config" instead of getting the confgiruation address space + from "ranges". + NOTE: When use the "config" property, reg-names must be set. - interrupts: A list of interrupt outputs for level interrupt, pulse interrupt, special interrupt. +- phys: From PHY binding. Phandle for the Generic PHY. + Refer to Documentation/devicetree/bindings/phy/samsung-phy.txt + +Other common properties refer to + Documentation/devicetree/binding/pci/designware-pcie.txt Example: @@ -54,6 +65,24 @@ SoC specific DT Entry: num-lanes = <4>; }; +With using PHY framework: + pcie_phy0: pcie-phy@270000 { + ... + reg = <0x270000 0x1000>, <0x271000 0x40>; + reg-names = "phy", "block"; + ... + }; + + pcie@290000 { + ... + reg = <0x290000 0x1000>, <0x40000000 0x1000>; + reg-names = "elbi", "config"; + phys = <&pcie_phy0>; + ranges = <0x81000000 0 0 0x60001000 0 0x00010000 + 0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; + ... + }; + Board specific DT Entry: pcie@290000 { diff --git a/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt b/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt new file mode 100644 index 000000000000..e68ae5dec9c9 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt @@ -0,0 +1,39 @@ +Broadcom USB3 phy binding for northstar plus SoC +The USB3 phy is internal to the SoC and is accessed using mdio interface. + +Required mdio bus properties: +- reg: Should be 0x0 for SoC internal USB3 phy +- #address-cells: must be 1 +- #size-cells: must be 0 + +Required USB3 PHY properties: +- compatible: should be "brcm,nsp-usb3-phy" +- reg: USB3 Phy address on SoC internal MDIO bus and it should be 0x10. +- usb3-ctrl-syscon: handler of syscon node defining physical address + of usb3 control register. +- #phy-cells: must be 0 + +Required usb3 control properties: +- compatible: should be "brcm,nsp-usb3-ctrl" +- reg: offset and length of the control registers + +Example: + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + usb3_phy: usb-phy@10 { + compatible = "brcm,nsp-usb3-phy"; + reg = <0x10>; + usb3-ctrl-syscon = <&usb3_ctrl>; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + usb3_ctrl: syscon@104408 { + compatible = "brcm,nsp-usb3-ctrl", "syscon"; + reg = <0x104408 0x3fc>; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt new file mode 100644 index 000000000000..b3b75c1e6285 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt @@ -0,0 +1,84 @@ +Qualcomm's USB HS PHY + +PROPERTIES + +- compatible: + Usage: required + Value type: <string> + Definition: Should contain "qcom,usb-hs-phy" and more specifically one of the + following: + + "qcom,usb-hs-phy-apq8064" + "qcom,usb-hs-phy-msm8916" + "qcom,usb-hs-phy-msm8974" + +- #phy-cells: + Usage: required + Value type: <u32> + Definition: Should contain 0 + +- clocks: + Usage: required + Value type: <prop-encoded-array> + Definition: Should contain clock specifier for the reference and sleep + clocks + +- clock-names: + Usage: required + Value type: <stringlist> + Definition: Should contain "ref" and "sleep" for the reference and sleep + clocks respectively + +- resets: + Usage: required + Value type: <prop-encoded-array> + Definition: Should contain the phy and POR resets + +- reset-names: + Usage: required + Value type: <stringlist> + Definition: Should contain "phy" and "por" for the phy and POR resets + respectively + +- v3p3-supply: + Usage: required + Value type: <phandle> + Definition: Should contain a reference to the 3.3V supply + +- v1p8-supply: + Usage: required + Value type: <phandle> + Definition: Should contain a reference to the 1.8V supply + +- extcon: + Usage: optional + Value type: <prop-encoded-array> + Definition: Should contain the vbus extcon + +- qcom,init-seq: + Usage: optional + Value type: <u8 array> + Definition: Should contain a sequence of ULPI address and value pairs to + program into the ULPI_EXT_VENDOR_SPECIFIC area. This is related + to Device Mode Eye Diagram test. The addresses are offsets + from the ULPI_EXT_VENDOR_SPECIFIC address, for example, + <0x1 0x53> would mean "write the value 0x53 to address 0x81". + +EXAMPLE + +otg: usb-controller { + ulpi { + phy { + compatible = "qcom,usb-hs-phy-msm8974", "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>; + reset-names = "phy", "por"; + v3p3-supply = <&pm8941_l24>; + v1p8-supply = <&pm8941_l6>; + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x63>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.txt b/Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.txt new file mode 100644 index 000000000000..3c7cb2be4b12 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.txt @@ -0,0 +1,65 @@ +Qualcomm's USB HSIC PHY + +PROPERTIES + +- compatible: + Usage: required + Value type: <string> + Definition: Should contain "qcom,usb-hsic-phy" and more specifically one of the + following: + + "qcom,usb-hsic-phy-mdm9615" + "qcom,usb-hsic-phy-msm8974" + +- #phy-cells: + Usage: required + Value type: <u32> + Definition: Should contain 0 + +- clocks: + Usage: required + Value type: <prop-encoded-array> + Definition: Should contain clock specifier for phy, calibration and + a calibration sleep clock + +- clock-names: + Usage: required + Value type: <stringlist> + Definition: Should contain "phy, "cal" and "cal_sleep" + +- pinctrl-names: + Usage: required + Value type: <stringlist> + Definition: Should contain "init" and "default" in that order + +- pinctrl-0: + Usage: required + Value type: <prop-encoded-array> + Definition: List of pinctrl settings to apply to keep HSIC pins in a glitch + free state + +- pinctrl-1: + Usage: required + Value type: <prop-encoded-array> + Definition: List of pinctrl settings to apply to mux out the HSIC pins + +EXAMPLE + +usb-controller { + ulpi { + phy { + compatible = "qcom,usb-hsic-phy-msm8974", + "qcom,usb-hsic-phy"; + #phy-cells = <0>; + pinctrl-names = "init", "default"; + pinctrl-0 = <&hsic_sleep>; + pinctrl-1 = <&hsic_default>; + clocks = <&gcc GCC_USB_HSIC_CLK>, + <&gcc GCC_USB_HSIC_IO_CAL_CLK>, + <&gcc GCC_USB_HSIC_IO_CAL_SLEEP_CLK>; + clock-names = "phy", "cal", "cal_sleep"; + assigned-clocks = <&gcc GCC_USB_HSIC_IO_CAL_CLK>; + assigned-clock-rates = <960000>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt index 9872ba8546bd..ab80bfe31cb3 100644 --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt @@ -191,3 +191,20 @@ Example: usbdrdphy0 = &usb3_phy0; usbdrdphy1 = &usb3_phy1; }; + +Samsung Exynos SoC series PCIe PHY controller +-------------------------------------------------- +Required properties: +- compatible : Should be set to "samsung,exynos5440-pcie-phy" +- #phy-cells : Must be zero +- reg : a register used by phy driver. + - First is for phy register, second is for block register. +- reg-names : Must be set to "phy" and "block". + +Example: + pcie_phy0: pcie-phy@270000 { + #phy-cells = <0>; + compatible = "samsung,exynos5440-pcie-phy"; + reg = <0x270000 0x1000>, <0x271000 0x40>; + reg-names = "phy", "block"; + }; diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt index 287150db6db4..e42334258185 100644 --- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt @@ -10,6 +10,7 @@ Required properties: * allwinner,sun8i-a23-usb-phy * allwinner,sun8i-a33-usb-phy * allwinner,sun8i-h3-usb-phy + * allwinner,sun8i-v3s-usb-phy * allwinner,sun50i-a64-usb-phy - reg : a list of offset + length pairs - reg-names : diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt index de1378b4efad..2fd688c8dbdb 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt @@ -6,7 +6,7 @@ the first two functions being GPIO in and out. The configuration on the pins includes drive strength and pull-up. Required properties: -- compatible: Should be one of the followings (depending on you SoC): +- compatible: Should be one of the following (depending on your SoC): "allwinner,sun4i-a10-pinctrl" "allwinner,sun5i-a10s-pinctrl" "allwinner,sun5i-a13-pinctrl" @@ -23,6 +23,7 @@ Required properties: "allwinner,sun8i-h3-pinctrl" "allwinner,sun8i-h3-r-pinctrl" "allwinner,sun50i-a64-pinctrl" + "allwinner,sun50i-h5-r-pinctrl" "nextthing,gr8-pinctrl" - reg: Should contain the register physical address and length for the diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt index 457b2c68d47b..8c5d27c5b562 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt @@ -19,7 +19,7 @@ iomuxc: iomuxc@30330000 { reg = <0x30330000 0x10000>; }; -Pheriparials using pads from iomuxc-lpsr support low state retention power +Peripherals using pads from iomuxc-lpsr support low state retention power state, under LPSR mode GPIO's state of pads are retain. Please refer to fsl,imx-pinctrl.txt in this directory for common binding part diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt new file mode 100644 index 000000000000..97aef67ee769 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt @@ -0,0 +1,46 @@ +* Marvell 98dx3236 pinctrl driver for mpp + +Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding +part and usage + +Required properties: +- compatible: "marvell,98dx3236-pinctrl" or "marvell,98dx4251-pinctrl" +- reg: register specifier of MPP registers + +This driver supports all 98dx3236, 98dx3336 and 98dx4251 variants + +name pins functions +================================================================================ +mpp0 0 gpo, spi0(mosi), dev(ad8) +mpp1 1 gpio, spi0(miso), dev(ad9) +mpp2 2 gpo, spi0(sck), dev(ad10) +mpp3 3 gpio, spi0(cs0), dev(ad11) +mpp4 4 gpio, spi0(cs1), smi(mdc), dev(cs0) +mpp5 5 gpio, pex(rsto), sd0(cmd), dev(bootcs) +mpp6 6 gpo, sd0(clk), dev(a2) +mpp7 7 gpio, sd0(d0), dev(ale0) +mpp8 8 gpio, sd0(d1), dev(ale1) +mpp9 9 gpio, sd0(d2), dev(ready0) +mpp10 10 gpio, sd0(d3), dev(ad12) +mpp11 11 gpio, uart1(rxd), uart0(cts), dev(ad13) +mpp12 12 gpo, uart1(txd), uart0(rts), dev(ad14) +mpp13 13 gpio, intr(out), dev(ad15) +mpp14 14 gpio, i2c0(sck) +mpp15 15 gpio, i2c0(sda) +mpp16 16 gpo, dev(oe) +mpp17 17 gpo, dev(clkout) +mpp18 18 gpio, uart1(txd) +mpp19 19 gpio, uart1(rxd), dev(rb) +mpp20 20 gpo, dev(we0) +mpp21 21 gpo, dev(ad0) +mpp22 22 gpo, dev(ad1) +mpp23 23 gpo, dev(ad2) +mpp24 24 gpo, dev(ad3) +mpp25 25 gpo, dev(ad4) +mpp26 26 gpo, dev(ad5) +mpp27 27 gpo, dev(ad6) +mpp28 28 gpo, dev(ad7) +mpp29 29 gpo, dev(a0) +mpp30 30 gpo, dev(a1) +mpp31 31 gpio, slv_smi(mdc), smi(mdc), dev(we1) +mpp32 32 gpio, slv_smi(mdio), smi(mdio), dev(cs1) diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt index 730444a9a4de..6c0ea155b708 100644 --- a/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt @@ -44,16 +44,16 @@ mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs) mpp17 17 gpio, sdio(d3) mpp18 18 gpo, nand(io0) mpp19 19 gpo, nand(io1) -mpp20 20 gpio, mii(rxerr) -mpp21 21 gpio, audio(spdifi) -mpp22 22 gpio, audio(spdifo) -mpp23 23 gpio, audio(rmclk) -mpp24 24 gpio, audio(bclk) -mpp25 25 gpio, audio(sdo) -mpp26 26 gpio, audio(lrclk) -mpp27 27 gpio, audio(mclk) -mpp28 28 gpio, audio(sdi) -mpp29 29 gpio, audio(extclk) +mpp35 35 gpio, mii(rxerr) +mpp36 36 gpio, audio(spdifi) +mpp37 37 gpio, audio(spdifo) +mpp38 38 gpio, audio(rmclk) +mpp39 39 gpio, audio(bclk) +mpp40 40 gpio, audio(sdo) +mpp41 41 gpio, audio(lrclk) +mpp42 42 gpio, audio(mclk) +mpp43 43 gpio, audio(sdi) +mpp44 44 gpio, audio(extclk) * Marvell Kirkwood 88f6190 diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt index 2ad18c4ea55c..b98e6f030da8 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt @@ -1,25 +1,38 @@ +====================== Aspeed Pin Controllers ----------------------- +====================== The Aspeed SoCs vary in functionality inside a generation but have a common mux device register layout. -Required properties: -- compatible : Should be any one of the following: - "aspeed,ast2400-pinctrl" - "aspeed,g4-pinctrl" - "aspeed,ast2500-pinctrl" - "aspeed,g5-pinctrl" +Required properties for g4: +- compatible : Should be one of the following: + "aspeed,ast2400-pinctrl" + "aspeed,g4-pinctrl" -The pin controller node should be a child of a syscon node with the required +Required properties for g5: +- compatible : Should be one of the following: + "aspeed,ast2500-pinctrl" + "aspeed,g5-pinctrl" + +- aspeed,external-nodes: A cell of phandles to external controller nodes: + 0: compatible with "aspeed,ast2500-gfx", "syscon" + 1: compatible with "aspeed,ast2500-lhc", "syscon" + +The pin controller node should be the child of a syscon node with the required property: -- compatible: "syscon", "simple-mfd" + +- compatible : Should be one of the following: + "aspeed,ast2400-scu", "syscon", "simple-mfd" + "aspeed,g4-scu", "syscon", "simple-mfd" + "aspeed,ast2500-scu", "syscon", "simple-mfd" + "aspeed,g5-scu", "syscon", "simple-mfd" Refer to the the bindings described in Documentation/devicetree/bindings/mfd/syscon.txt Subnode Format --------------- +============== The required properties of child nodes are (as defined in pinctrl-bindings): - function @@ -31,26 +44,43 @@ supported: aspeed,ast2400-pinctrl, aspeed,g4-pinctrl: -ACPI BMCINT DDCCLK DDCDAT FLACK FLBUSY FLWP GPID0 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 -I2C11 I2C12 I2C13 I2C3 I2C4 I2C5 I2C6 I2C7 I2C8 I2C9 LPCPD LPCPME LPCSMI MDIO1 -MDIO2 NCTS1 NCTS3 NCTS4 NDCD1 NDCD3 NDCD4 NDSR1 NDSR3 NDTR1 NDTR3 NRI1 NRI3 -NRI4 NRTS1 NRTS3 PWM0 PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 RGMII1 RMII1 ROM16 -ROM8 ROMCS1 ROMCS2 ROMCS3 ROMCS4 RXD1 RXD3 RXD4 SD1 SGPMI SIOPBI SIOPBO TIMER3 -TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD3 TXD4 UART6 VGAHS VGAVS VPI18 VPI24 VPI30 -VPO12 VPO24 +ACPI ADC0 ADC1 ADC10 ADC11 ADC12 ADC13 ADC14 ADC15 ADC2 ADC3 ADC4 ADC5 ADC6 +ADC7 ADC8 ADC9 BMCINT DDCCLK DDCDAT EXTRST FLACK FLBUSY FLWP GPID GPID0 GPID2 +GPID4 GPID6 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 +I2C5 I2C6 I2C7 I2C8 I2C9 LPCPD LPCPME LPCRST LPCSMI MAC1LINK MAC2LINK MDIO1 +MDIO2 NCTS1 NCTS2 NCTS3 NCTS4 NDCD1 NDCD2 NDCD3 NDCD4 NDSR1 NDSR2 NDSR3 NDSR4 +NDTR1 NDTR2 NDTR3 NDTR4 NDTS4 NRI1 NRI2 NRI3 NRI4 NRTS1 NRTS2 NRTS3 OSCCLK PWM0 +PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 ROM16 ROM8 ROMCS1 +ROMCS2 ROMCS3 ROMCS4 RXD1 RXD2 RXD3 RXD4 SALT1 SALT2 SALT3 SALT4 SD1 SD2 SGPMCK +SGPMI SGPMLD SGPMO SGPSCK SGPSI0 SGPSI1 SGPSLD SIOONCTRL SIOPBI SIOPBO SIOPWREQ +SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1DEBUG SPI1PASSTHRU SPICS1 TIMER3 TIMER4 +TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 TXD3 TXD4 UART6 USBCKI VGABIOS_ROM VGAHS +VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1 WDTRST2 aspeed,ast2500-pinctrl, aspeed,g5-pinctrl: -GPID0 GPID2 GPIE0 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6 I2C7 I2C8 -I2C9 MAC1LINK MDIO1 MDIO2 OSCCLK PEWAKE PWM0 PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 -RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 SPI1DEBUG SPI1PASSTHRU TIMER4 TIMER5 TIMER6 -TIMER7 TIMER8 VGABIOSROM - - -Examples: +ACPI ADC0 ADC1 ADC10 ADC11 ADC12 ADC13 ADC14 ADC15 ADC2 ADC3 ADC4 ADC5 ADC6 +ADC7 ADC8 ADC9 BMCINT DDCCLK DDCDAT ESPI FWSPICS1 FWSPICS2 GPID0 GPID2 GPID4 +GPID6 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6 +I2C7 I2C8 I2C9 LAD0 LAD1 LAD2 LAD3 LCLK LFRAME LPCHC LPCPD LPCPLUS LPCPME +LPCRST LPCSMI LSIRQ MAC1LINK MAC2LINK MDIO1 MDIO2 NCTS1 NCTS2 NCTS3 NCTS4 NDCD1 +NDCD2 NDCD3 NDCD4 NDSR1 NDSR2 NDSR3 NDSR4 NDTR1 NDTR2 NDTR3 NDTR4 NRI1 NRI2 +NRI3 NRI4 NRTS1 NRTS2 NRTS3 NRTS4 OSCCLK PEWAKE PNOR PWM0 PWM1 PWM2 PWM3 PWM4 +PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 RXD1 RXD2 RXD3 RXD4 SALT1 SALT10 +SALT11 SALT12 SALT13 SALT14 SALT2 SALT3 SALT4 SALT5 SALT6 SALT7 SALT8 SALT9 +SCL1 SCL2 SD1 SD2 SDA1 SDA2 SGPS1 SGPS2 SIOONCTRL SIOPBI SIOPBO SIOPWREQ +SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1CS1 SPI1DEBUG SPI1PASSTHRU SPI2CK SPI2CS0 +SPI2CS1 SPI2MISO SPI2MOSI TIMER3 TIMER4 TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 +TXD3 TXD4 UART6 USBCKI VGABIOSROM VGAHS VGAVS VPI24 VPO WDTRST1 WDTRST2 + +Examples +======== + +g4 Example +---------- syscon: scu@1e6e2000 { - compatible = "syscon", "simple-mfd"; + compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd"; reg = <0x1e6e2000 0x1a8>; pinctrl: pinctrl { @@ -63,5 +93,56 @@ syscon: scu@1e6e2000 { }; }; +g5 Example +---------- + +ahb { + apb { + syscon: scu@1e6e2000 { + compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1a8>; + + pinctrl: pinctrl { + compatible = "aspeed,g5-pinctrl"; + aspeed,external-nodes = <&gfx &lhc>; + + pinctrl_i2c3_default: i2c3_default { + function = "I2C3"; + groups = "I2C3"; + }; + }; + }; + + gfx: display@1e6e6000 { + compatible = "aspeed,ast2500-gfx", "syscon"; + reg = <0x1e6e6000 0x1000>; + }; + }; + + lpc: lpc@1e789000 { + compatible = "aspeed,ast2500-lpc", "simple-mfd"; + reg = <0x1e789000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e789000 0x1000>; + + lpc_host: lpc-host@80 { + compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"; + reg = <0x80 0x1e0>; + reg-io-width = <4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80 0x1e0>; + + lhc: lhc@20 { + compatible = "aspeed,ast2500-lhc"; + reg = <0x20 0x24 0x48 0x8>; + }; + }; + }; +}; + Please refer to pinctrl-bindings.txt in this directory for details of the common pinctrl bindings used by client devices. diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt index 1baf19eecabf..5e00a21de2bf 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt @@ -13,6 +13,7 @@ Required Properties: - "samsung,s3c2450-pinctrl": for S3C2450-compatible pin-controller, - "samsung,s3c64xx-pinctrl": for S3C64xx-compatible pin-controller, - "samsung,s5pv210-pinctrl": for S5PV210-compatible pin-controller, + - "samsung,exynos3250-pinctrl": for Exynos3250 compatible pin-controller. - "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller. - "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller. - "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller. diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt index b24583aa34c3..eac20aa33907 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt @@ -8,8 +8,9 @@ controllers onto these pads. Pin controller node: Required properies: - compatible: value should be one of the following: - (a) "st,stm32f429-pinctrl" - (b) "st,stm32f746-pinctrl" + "st,stm32f429-pinctrl" + "st,stm32f746-pinctrl" + "st,stm32h743-pinctrl" - #address-cells: The value of this property must be 1 - #size-cells : The value of this property must be 1 - ranges : defines mapping between pin controller node (parent) to @@ -37,8 +38,23 @@ Optional properties: - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node which includes IRQ mux selection register, and the offset of the IRQ mux selection register. + - ngpios: Number of gpios in a bank (to use if bank gpio numbers is less + than 16). + - gpio-ranges: Define a dedicated mapping between a pin-controller and + a gpio controller. Format is <&phandle a b c> with: + -(phandle): phandle of pin-controller. + -(a): gpio base offset in range. + -(b): pin base offset in range. + -(c): gpio count in range + This entry has to be used either if there are holes inside a bank: + GPIOB0/B1/B2/B14/B15 (see example 2) + or if banks are not contiguous: + GPIOA/B/C/E... + NOTE: If "gpio-ranges" is used for a gpio controller, all gpio-controller + have to use a "gpio-ranges" entry. + More details in Documentation/devicetree/bindings/gpio/gpio.txt. -Example: +Example 1: #include <dt-bindings/pinctrl/stm32f429-pinfunc.h> ... @@ -60,6 +76,43 @@ Example: pin-functions nodes follow... }; +Example 2: +#include <dt-bindings/pinctrl/stm32f429-pinfunc.h> +... + + pinctrl: pin-controller { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32f429-pinctrl"; + ranges = <0 0x40020000 0x3000>; + pins-are-numbered; + + gpioa: gpio@40020000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x0 0x400>; + resets = <&reset_ahb1 0>; + st,bank-name = "GPIOA"; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@40020400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x0 0x400>; + resets = <&reset_ahb1 0>; + st,bank-name = "GPIOB"; + ngpios = 4; + gpio-ranges = <&pinctrl 0 16 3>, + <&pinctrl 14 30 2>; + }; + + + ... + pin-functions nodes follow... + }; + + Contents of function subnode node: ---------------------------------- Subnode format diff --git a/Documentation/devicetree/bindings/pinctrl/ti,iodelay.txt b/Documentation/devicetree/bindings/pinctrl/ti,iodelay.txt new file mode 100644 index 000000000000..c3ed1232b6a3 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/ti,iodelay.txt @@ -0,0 +1,47 @@ +* Pin configuration for TI IODELAY controller + +TI dra7 based SoCs such as am57xx have a controller for setting the IO delay +for each pin. For most part the IO delay values are programmed by the bootloader, +but some pins need to be configured dynamically by the kernel such as the +MMC pins. + +Required Properties: + + - compatible: Must be "ti,dra7-iodelay" + - reg: Base address and length of the memory resource used + - #address-cells: Number of address cells + - #size-cells: Size of cells + - #pinctrl-cells: Number of pinctrl cells, must be 2. See also + Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt + +Example +------- + +In the SoC specific dtsi file: + + dra7_iodelay_core: padconf@4844a000 { + compatible = "ti,dra7-iodelay"; + reg = <0x4844a000 0x0d1c>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <2>; + }; + +In board-specific file: + +&dra7_iodelay_core { + mmc2_iodelay_3v3_conf: mmc2_iodelay_3v3_conf { + pinctrl-pin-array = < + 0x18c A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A19_IN */ + 0x1a4 A_DELAY_PS(265) G_DELAY_PS(360) /* CFG_GPMC_A20_IN */ + 0x1b0 A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A21_IN */ + 0x1bc A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A22_IN */ + 0x1c8 A_DELAY_PS(287) G_DELAY_PS(420) /* CFG_GPMC_A23_IN */ + 0x1d4 A_DELAY_PS(144) G_DELAY_PS(240) /* CFG_GPMC_A24_IN */ + 0x1e0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_IN */ + 0x1ec A_DELAY_PS(120) G_DELAY_PS(0) /* CFG_GPMC_A26_IN */ + 0x1f8 A_DELAY_PS(120) G_DELAY_PS(180) /* CFG_GPMC_A27_IN */ + 0x360 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_IN */ + >; + }; +}; diff --git a/Documentation/devicetree/bindings/power/pd-samsung.txt b/Documentation/devicetree/bindings/power/pd-samsung.txt index 4e947372a693..549f7dee9b9d 100644 --- a/Documentation/devicetree/bindings/power/pd-samsung.txt +++ b/Documentation/devicetree/bindings/power/pd-samsung.txt @@ -6,12 +6,15 @@ to gate power to one or more peripherals on the processor. Required Properties: - compatible: should be one of the following. * samsung,exynos4210-pd - for exynos4210 type power domain. + * samsung,exynos5433-pd - for exynos5433 type power domain. - reg: physical base address of the controller and length of memory mapped region. - #power-domain-cells: number of cells in power domain specifier; must be 0. Optional Properties: +- label: Human readable string with domain name. Will be visible in userspace + to let user to distinguish between multiple domains in SoC. - clocks: List of clock handles. The parent clocks of the input clocks to the devices in this power domain are set to oscclk before power gating and restored back after powering on a domain. This is required for @@ -20,7 +23,7 @@ Optional Properties: - clock-names: The following clocks can be specified: - oscclk: Oscillator clock. - clkN: Input clocks to the devices in this power domain. These clocks - will be reparented to oscclk before swithing power domain off. + will be reparented to oscclk before switching power domain off. Their original parent will be brought back after turning on the domain. Maximum of 4 clocks (N = 0 to 3) are supported. - asbN: Clocks required by asynchronous bridges (ASB) present in @@ -38,6 +41,7 @@ Example: compatible = "samsung,exynos4210-pd"; reg = <0x10023C00 0x10>; #power-domain-cells = <0>; + label = "LCD0"; }; mfc_pd: power-domain@10044060 { @@ -46,6 +50,7 @@ Example: clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK333>; clock-names = "oscclk", "clk0"; #power-domain-cells = <0>; + label = "MFC"; }; See Documentation/devicetree/bindings/power/power_domain.txt for description diff --git a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt index d4eab9227ea4..e62d53d844cc 100644 --- a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt +++ b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt @@ -2,12 +2,12 @@ Driver a GPIO line that can be used to turn the power off. The driver supports both level triggered and edge triggered power off. At driver load time, the driver will request the given gpio line and -install a pm_power_off handler. If the optional properties 'input' is -not found, the GPIO line will be driven in the inactive +install a handler to power off the system. If the optional properties +'input' is not found, the GPIO line will be driven in the inactive state. Otherwise its configured as an input. -When the pm_power_off is called, the gpio is configured as an output, -and drive active, so triggering a level triggered power off +When the power-off handler is called, the gpio is configured as an +output, and drive active, so triggering a level triggered power off condition. This will also cause an inactive->active edge condition, so triggering positive edge triggered power off. After a delay of 100ms, the GPIO is set to inactive, thus causing an active->inactive edge, @@ -24,7 +24,7 @@ Required properties: Optional properties: - input : Initially configure the GPIO line as an input. Only reconfigure - it to an output when the pm_power_off function is called. If this optional + it to an output when the power-off handler is called. If this optional property is not specified, the GPIO is initialized as an output in its inactive state. diff --git a/Documentation/devicetree/bindings/power/reset/qnap-poweroff.txt b/Documentation/devicetree/bindings/power/reset/qnap-poweroff.txt index af25e77c0e0c..c363d7173129 100644 --- a/Documentation/devicetree/bindings/power/reset/qnap-poweroff.txt +++ b/Documentation/devicetree/bindings/power/reset/qnap-poweroff.txt @@ -3,8 +3,7 @@ QNAP NAS devices have a microcontroller controlling the main power supply. This microcontroller is connected to UART1 of the Kirkwood and Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the -microcontroller to turn the power off. This driver adds a handler to -pm_power_off which is called to turn the power off. +microcontroller to turn the power off. Synology NAS devices use a similar scheme, but a different baud rate, 9600, and a different character, '1'. diff --git a/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt b/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt new file mode 100644 index 000000000000..826e8a879121 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt @@ -0,0 +1,22 @@ +AXP20X and AXP22X PMICs' AC power supply + +Required Properties: + - compatible: One of: + "x-powers,axp202-ac-power-supply" + "x-powers,axp221-ac-power-supply" + +This node is a subnode of the axp20x PMIC. + +The AXP20X can read the current current and voltage supplied by AC by +reading ADC channels from the AXP20X ADC. + +The AXP22X is only able to tell if an AC power supply is present and +usable. + +Example: + +&axp209 { + ac_power_supply: ac-power-supply { + compatible = "x-powers,axp202-ac-power-supply"; + }; +}; diff --git a/Documentation/devicetree/bindings/power/supply/axp20x_usb_power.txt b/Documentation/devicetree/bindings/power/supply/axp20x_usb_power.txt index f1d7beec45bf..ba8d35f66cbe 100644 --- a/Documentation/devicetree/bindings/power/supply/axp20x_usb_power.txt +++ b/Documentation/devicetree/bindings/power/supply/axp20x_usb_power.txt @@ -3,6 +3,11 @@ AXP20x USB power supply Required Properties: -compatible: One of: "x-powers,axp202-usb-power-supply" "x-powers,axp221-usb-power-supply" + "x-powers,axp223-usb-power-supply" + +The AXP223 PMIC shares most of its behaviour with the AXP221 but has slight +variations such as the former being able to set the VBUS power supply max +current to 100mA, unlike the latter. This node is a subnode of the axp20x PMIC. diff --git a/Documentation/devicetree/bindings/power/supply/bq27xxx.txt b/Documentation/devicetree/bindings/power/supply/bq27xxx.txt new file mode 100644 index 000000000000..b0c95ef63e68 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/bq27xxx.txt @@ -0,0 +1,36 @@ +Binding for TI BQ27XXX fuel gauge family + +Required properties: +- compatible: Should contain one of the following: + * "ti,bq27200" - BQ27200 + * "ti,bq27210" - BQ27210 + * "ti,bq27500" - deprecated, use revision specific property below + * "ti,bq27510" - deprecated, use revision specific property below + * "ti,bq27520" - deprecated, use revision specific property below + * "ti,bq27500-1" - BQ27500/1 + * "ti,bq27510g1" - BQ27510-g1 + * "ti,bq27510g2" - BQ27510-g2 + * "ti,bq27510g3" - BQ27510-g3 + * "ti,bq27520g1" - BQ27520-g1 + * "ti,bq27520g2" - BQ27520-g2 + * "ti,bq27520g3" - BQ27520-g3 + * "ti,bq27520g4" - BQ27520-g4 + * "ti,bq27530" - BQ27530 + * "ti,bq27531" - BQ27531 + * "ti,bq27541" - BQ27541 + * "ti,bq27542" - BQ27542 + * "ti,bq27546" - BQ27546 + * "ti,bq27742" - BQ27742 + * "ti,bq27545" - BQ27545 + * "ti,bq27421" - BQ27421 + * "ti,bq27425" - BQ27425 + * "ti,bq27441" - BQ27441 + * "ti,bq27621" - BQ27621 +- reg: integer, i2c address of the device. + +Example: + +bq27510g3 { + compatible = "ti,bq27510g3"; + reg = <0x55>; +}; diff --git a/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt b/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt index 65b88fac854b..06f8a5ddb68e 100644 --- a/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt +++ b/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt @@ -105,6 +105,22 @@ PROPERTIES regulation must be done externally to fully comply with the JEITA safety guidelines if this flag is set. +- usb_otg_in-supply: + Usage: optional + Value type: <phandle> + Description: Reference to the regulator supplying power to the USB_OTG_IN + pin. + +child nodes: +- otg-vbus: + Usage: optional + Description: This node defines a regulator used to control the direction + of VBUS voltage - specifically: whether to supply voltage + to VBUS for host mode operation of the OTG port, or allow + input voltage from external VBUS for charging. In the + hardware, the supply for this regulator comes from + usb_otg_in-supply. + EXAMPLE charger@1000 { compatible = "qcom,pm8941-charger"; @@ -128,4 +144,7 @@ charger@1000 { qcom,fast-charge-current-limit = <1000000>; qcom,dc-charge-current-limit = <1000000>; + usb_otg_in-supply = <&pm8941_5vs1>; + + otg-vbus {}; }; diff --git a/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt new file mode 100644 index 000000000000..a3719623a94f --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt @@ -0,0 +1,23 @@ +SBS sbs-charger +~~~~~~~~~~ + +Required properties: + - compatible: "<vendor>,<part-number>", "sbs,sbs-charger" as fallback. The part + number compatible string might be used in order to take care of vendor + specific registers. + +Optional properties: +- interrupt-parent: Should be the phandle for the interrupt controller. Use in + conjunction with "interrupts". +- interrupts: Interrupt mapping for GPIO IRQ. Use in conjunction with + "interrupt-parent". If an interrupt is not provided the driver will switch + automatically to polling. + +Example: + + ltc4100@9 { + compatible = "lltc,ltc4100", "sbs,sbs-charger"; + reg = <0x9>; + interrupt-parent = <&gpio6>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + }; diff --git a/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt b/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt index 3bf55757ceec..de45e1a2a4d9 100644 --- a/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt +++ b/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt @@ -8,8 +8,10 @@ Optional properties : - interrupts : Specify the interrupt to be used to trigger when the AC adapter is either plugged in or removed. - ti,ac-detect-gpios : This GPIO is optionally used to read the AC adapter - presence. This is a Host GPIO that is configured as an input and - connected to the bq24735. + status. This is a Host GPIO that is configured as an input and connected + to the ACOK pin on the bq24735. Note: for backwards compatibility reasons, + the GPIO must be active on AC adapter absence despite ACOK being active + (high) on AC adapter presence. - ti,charge-current : Used to control and set the charging current. This value must be between 128mA and 8.128A with a 64mA step resolution. The POR value is 0x0000h. This number is in mA (e.g. 8192), see spec for more information @@ -25,6 +27,8 @@ Optional properties : - ti,external-control : Indicates that the charger is configured externally and that the host should not attempt to enable/disable charging or set the charge voltage/current. + - poll-interval : In case 'interrupts' is not specified, poll AC adapter + presence with this interval (milliseconds). Example: diff --git a/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt b/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt index 98d131acee95..a11072c5a866 100644 --- a/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt +++ b/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt @@ -2,11 +2,16 @@ TPS65217 Charger Required Properties: -compatible: "ti,tps65217-charger" +-interrupts: TPS65217 interrupt numbers for the AC and USB charger input change. + Should be <0> for the USB charger and <1> for the AC adapter. +-interrupt-names: Should be "USB" and "AC" This node is a subnode of the tps65217 PMIC. Example: tps65217-charger { - compatible = "ti,tps65090-charger"; + compatible = "ti,tps65217-charger"; + interrupts = <0>, <1>; + interrupt-names = "USB", "AC"; }; diff --git a/Documentation/devicetree/bindings/power_supply/maxim,max14656.txt b/Documentation/devicetree/bindings/power_supply/maxim,max14656.txt new file mode 100644 index 000000000000..e03e85ae6572 --- /dev/null +++ b/Documentation/devicetree/bindings/power_supply/maxim,max14656.txt @@ -0,0 +1,25 @@ +Maxim MAX14656 / AL32 USB Charger Detector + +Required properties : +- compatible : "maxim,max14656"; +- reg: i2c slave address +- interrupt-parent: the phandle for the interrupt controller +- interrupts: interrupt line + +Example: + +&i2c2 { + clock-frequency = <50000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + max14656@35 { + compatible = "maxim,max14656"; + reg = <0x35>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_charger_detect>; + interrupt-parent = <&gpio6>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH>; + }; +}; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt b/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt index c41b2187eaa8..dc9bb3182525 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt @@ -5,8 +5,46 @@ The cache bindings explained below are ePAPR compliant Required Properties: -- compatible : Should include "fsl,chip-l2-cache-controller" and "cache" - where chip is the processor (bsc9132, npc8572 etc.) +- compatible : Should include one of the following: + "fsl,8540-l2-cache-controller" + "fsl,8541-l2-cache-controller" + "fsl,8544-l2-cache-controller" + "fsl,8548-l2-cache-controller" + "fsl,8555-l2-cache-controller" + "fsl,8568-l2-cache-controller" + "fsl,b4420-l2-cache-controller" + "fsl,b4860-l2-cache-controller" + "fsl,bsc9131-l2-cache-controller" + "fsl,bsc9132-l2-cache-controller" + "fsl,c293-l2-cache-controller" + "fsl,mpc8536-l2-cache-controller" + "fsl,mpc8540-l2-cache-controller" + "fsl,mpc8541-l2-cache-controller" + "fsl,mpc8544-l2-cache-controller" + "fsl,mpc8548-l2-cache-controller" + "fsl,mpc8555-l2-cache-controller" + "fsl,mpc8560-l2-cache-controller" + "fsl,mpc8568-l2-cache-controller" + "fsl,mpc8569-l2-cache-controller" + "fsl,mpc8572-l2-cache-controller" + "fsl,p1010-l2-cache-controller" + "fsl,p1011-l2-cache-controller" + "fsl,p1012-l2-cache-controller" + "fsl,p1013-l2-cache-controller" + "fsl,p1014-l2-cache-controller" + "fsl,p1015-l2-cache-controller" + "fsl,p1016-l2-cache-controller" + "fsl,p1020-l2-cache-controller" + "fsl,p1021-l2-cache-controller" + "fsl,p1022-l2-cache-controller" + "fsl,p1023-l2-cache-controller" + "fsl,p1024-l2-cache-controller" + "fsl,p1025-l2-cache-controller" + "fsl,p2010-l2-cache-controller" + "fsl,p2020-l2-cache-controller" + "fsl,t2080-l2-cache-controller" + "fsl,t4240-l2-cache-controller" + and "cache". - reg : Address and size of L2 cache controller registers - cache-size : Size of the entire L2 cache - interrupts : Error interrupt of L2 controller diff --git a/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt b/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt new file mode 100644 index 000000000000..9d619e955576 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt @@ -0,0 +1,118 @@ +IBM Power-Management Bindings +============================= + +Linux running on baremetal POWER machines has access to the processor +idle states. The description of these idle states is exposed via the +node @power-mgt in the device-tree by the firmware. + +Definitions: +---------------- +Typically each idle state has the following associated properties: + +- name: The name of the idle state as defined by the firmware. + +- flags: indicating some aspects of this idle states such as the + extent of state-loss, whether timebase is stopped on this + idle states and so on. The flag bits are as follows: + +- exit-latency: The latency involved in transitioning the state of the + CPU from idle to running. + +- target-residency: The minimum time that the CPU needs to reside in + this idle state in order to accrue power-savings + benefit. + +Properties +---------------- +The following properties provide details about the idle states. These +properties are exposed as arrays. Each entry in the property array +provides the value of that property for the idle state associated with +the array index of that entry. + +If idle-states are defined, then the properties +"ibm,cpu-idle-state-names" and "ibm,cpu-idle-state-flags" are +required. The other properties are required unless mentioned +otherwise. The length of all the property arrays must be the same. + +- ibm,cpu-idle-state-names: + Array of strings containing the names of the idle states. + +- ibm,cpu-idle-state-flags: + Array of unsigned 32-bit values containing the values of the + flags associated with the the aforementioned idle-states. The + flag bits are as follows: + 0x00000001 /* Decrementer would stop */ + 0x00000002 /* Needs timebase restore */ + 0x00001000 /* Restore GPRs like nap */ + 0x00002000 /* Restore hypervisor resource from PACA pointer */ + 0x00004000 /* Program PORE to restore PACA pointer */ + 0x00010000 /* This is a nap state (POWER7,POWER8) */ + 0x00020000 /* This is a fast-sleep state (POWER8)*/ + 0x00040000 /* This is a winkle state (POWER8) */ + 0x00080000 /* This is a fast-sleep state which requires a */ + /* software workaround for restoring the */ + /* timebase (POWER8) */ + 0x00800000 /* This state uses SPR PMICR instruction */ + /* (POWER8)*/ + 0x00100000 /* This is a fast stop state (POWER9) */ + 0x00200000 /* This is a deep-stop state (POWER9) */ + +- ibm,cpu-idle-state-latencies-ns: + Array of unsigned 32-bit values containing the values of the + exit-latencies (in ns) for the idle states in + ibm,cpu-idle-state-names. + +- ibm,cpu-idle-state-residency-ns: + Array of unsigned 32-bit values containing the values of the + target-residency (in ns) for the idle states in + ibm,cpu-idle-state-names. On POWER8 this is an optional + property. If the property is absent, the target residency for + the "Nap", "FastSleep" are defined to 10000 and 300000000 + respectively by the kernel. On POWER9 this property is required. + +- ibm,cpu-idle-state-psscr: + Array of unsigned 64-bit values containing the values for the + PSSCR for each of the idle states in ibm,cpu-idle-state-names. + This property is required on POWER9 and absent on POWER8. + +- ibm,cpu-idle-state-psscr-mask: + Array of unsigned 64-bit values containing the masks + indicating which psscr fields are set in the corresponding + entries of ibm,cpu-idle-state-psscr. This property is + required on POWER9 and absent on POWER8. + + Whenever the firmware sets an entry in + ibm,cpu-idle-state-psscr-mask value to 0xf, it implies that + only the Requested Level (RL) field of the corresponding entry + in ibm,cpu-idle-state-psscr should be considered by the + kernel. For such idle states, the kernel would set the + remaining fields of the psscr to the following sane-default + values. + + - ESL and EC bits are to 1. So wakeup from any stop + state will be at vector 0x100. + + - MTL and PSLL are set to the maximum allowed value as + per the ISA, i.e. 15. + + - The Transition Rate, TR is set to the Maximum value + 3. + + For all the other values of the entry in + ibm,cpu-idle-state-psscr-mask, the kernel expects all the + psscr fields of the corresponding entry in + ibm,cpu-idle-state-psscr to be correctly set by the firmware. + +- ibm,cpu-idle-state-pmicr: + Array of unsigned 64-bit values containing the pmicr values + for the idle states in ibm,cpu-idle-state-names. This 64-bit + register value is to be set in pmicr for the corresponding + state if the flag indicates that pmicr SPR should be set. This + is an optional property on POWER8 and is absent on + POWER9. + +- ibm,cpu-idle-state-pmicr-mask: + Array of unsigned 64-bit values containing the mask indicating + which of the fields of the PMICR are set in the corresponding + entries in ibm,cpu-idle-state-pmicr. This is an optional + property on POWER8 and is absent on POWER9. diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.txt b/Documentation/devicetree/bindings/pwm/imx-pwm.txt index e00c2e9f484d..c61bdf8cd41b 100644 --- a/Documentation/devicetree/bindings/pwm/imx-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/imx-pwm.txt @@ -6,8 +6,8 @@ Required properties: - "fsl,imx1-pwm" for PWM compatible with the one integrated on i.MX1 - "fsl,imx27-pwm" for PWM compatible with the one integrated on i.MX27 - reg: physical base address and length of the controller's registers -- #pwm-cells: should be 2. See pwm.txt in this directory for a description of - the cells format. +- #pwm-cells: 2 for i.MX1 and 3 for i.MX27 and newer SoCs. See pwm.txt + in this directory for a description of the cells format. - clocks : Clock specifiers for both ipg and per clocks. - clock-names : Clock names should include both "ipg" and "per" See the clock consumer binding, @@ -17,7 +17,7 @@ See the clock consumer binding, Example: pwm1: pwm@53fb4000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; reg = <0x53fb4000 0x4000>; clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt new file mode 100644 index 000000000000..6dd040363e5e --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt @@ -0,0 +1,35 @@ +STMicroelectronics STM32 Timers PWM bindings + +Must be a sub-node of an STM32 Timers device tree node. +See ../mfd/stm32-timers.txt for details about the parent node. + +Required parameters: +- compatible: Must be "st,stm32-pwm". +- pinctrl-names: Set to "default". +- pinctrl-0: List of phandles pointing to pin configuration nodes for PWM module. + For Pinctrl properties see ../pinctrl/pinctrl-bindings.txt + +Optional parameters: +- st,breakinput: One or two <index level filter> to describe break input configurations. + "index" indicates on which break input (0 or 1) the configuration + should be applied. + "level" gives the active level (0=low or 1=high) of the input signal + for this configuration. + "filter" gives the filtering value to be applied. + +Example: + timers@40010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40010000 0x400>; + clocks = <&rcc 0 160>; + clock-names = "clk_int"; + + pwm { + compatible = "st,stm32-pwm"; + pinctrl-0 = <&pwm1_pins>; + pinctrl-names = "default"; + st,breakinput = <0 1 5>; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt index 37c4ea076f88..1d58c8cfdbc0 100644 --- a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt @@ -14,6 +14,7 @@ Optional properties: - anatop-delay-bit-shift: Bit shift for the step time register - anatop-delay-bit-width: Number of bits used in the step time register - vin-supply: The supply for this regulator +- anatop-enable-bit: Regulator enable bit offset Any property defined as part of the core regulator binding, defined in regulator.txt, can also be used. diff --git a/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt b/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt new file mode 100644 index 000000000000..675f4437ce92 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt @@ -0,0 +1,34 @@ +Motorola CPCAP PMIC voltage regulators +------------------------------------ + +Requires node properties: +- "compatible" value one of: + "motorola,cpcap-regulator" + "motorola,mapphone-cpcap-regulator" + +Required regulator properties: +- "regulator-name" +- "regulator-enable-ramp-delay" +- "regulator-min-microvolt" +- "regulator-max-microvolt" + +Optional regulator properties: +- "regulator-boot-on" + +See Documentation/devicetree/bindings/regulator/regulator.txt +for more details about the regulator properties. + +Example: + +cpcap_regulator: regulator { + compatible = "motorola,cpcap-regulator"; + + cpcap_regulators: regulators { + sw5: SW5 { + regulator-min-microvolt = <5050000>; + regulator-max-microvolt = <5050000>; + regulator-enable-ramp-delay = <50000>; + regulator-boot-on; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt index e5cac1e0ca8a..dd1ed789728e 100644 --- a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt @@ -13,7 +13,7 @@ Optional properties: - startup-delay-us : Startup time in microseconds. - enable-active-high : Polarity of GPIO is active high (default is low). - regulator-type : Specifies what is being regulated, must be either - "voltage" or "current", defaults to current. + "voltage" or "current", defaults to voltage. Any property defined as part of the core regulator binding defined in regulator.txt can also be used. diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt index 1f8d6f84b657..4e3dfb5b5f16 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt @@ -22,6 +22,7 @@ Regulator nodes are identified by their compatible: "qcom,rpm-pm8841-regulators" "qcom,rpm-pm8916-regulators" "qcom,rpm-pm8941-regulators" + "qcom,rpm-pm8994-regulators" "qcom,rpm-pma8084-regulators" - vdd_s1-supply: @@ -80,6 +81,56 @@ Regulator nodes are identified by their compatible: - vdd_s10-supply: - vdd_s11-supply: - vdd_s12-supply: +- vdd_l1-supply: +- vdd_l2_l26_l28-supply: +- vdd_l3_l11-supply: +- vdd_l4_l27_l31-supply: +- vdd_l5_l7-supply: +- vdd_l6_l12_l32-supply: +- vdd_l5_l7-supply: +- vdd_l8_l16_l30-supply: +- vdd_l9_l10_l18_l22-supply: +- vdd_l9_l10_l18_l22-supply: +- vdd_l3_l11-supply: +- vdd_l6_l12_l32-supply: +- vdd_l13_l19_l23_l24-supply: +- vdd_l14_l15-supply: +- vdd_l14_l15-supply: +- vdd_l8_l16_l30-supply: +- vdd_l17_l29-supply: +- vdd_l9_l10_l18_l22-supply: +- vdd_l13_l19_l23_l24-supply: +- vdd_l20_l21-supply: +- vdd_l20_l21-supply: +- vdd_l9_l10_l18_l22-supply: +- vdd_l13_l19_l23_l24-supply: +- vdd_l13_l19_l23_l24-supply: +- vdd_l25-supply: +- vdd_l2_l26_l28-supply: +- vdd_l4_l27_l31-supply: +- vdd_l2_l26_l28-supply: +- vdd_l17_l29-supply: +- vdd_l8_l16_l30-supply: +- vdd_l4_l27_l31-supply: +- vdd_l6_l12_l32-supply: +- vdd_lvs1_2-supply: + Usage: optional (pm8994 only) + Value type: <phandle> + Definition: reference to regulator supplying the input pin, as + described in the data sheet + +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: +- vdd_s5-supply: +- vdd_s6-supply: +- vdd_s7-supply: +- vdd_s8-supply: +- vdd_s9-supply: +- vdd_s10-supply: +- vdd_s11-supply: +- vdd_s12-supply: - vdd_l1_l11-supply: - vdd_l2_l3_l4_l27-supply: - vdd_l5_l7-supply: @@ -113,6 +164,11 @@ pm8941: l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3, 5vs1, 5vs2 +pm8994: + s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5, + l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, + l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2 + pma8084: s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt index b85885a298d8..75ad7b8df0b1 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt @@ -9,6 +9,7 @@ on the Qualcomm ADSP Hexagon core. Definition: must be one of: "qcom,msm8974-adsp-pil" "qcom,msm8996-adsp-pil" + "qcom,msm8996-slpi-pil" - interrupts-extended: Usage: required @@ -24,13 +25,13 @@ on the Qualcomm ADSP Hexagon core. - clocks: Usage: required Value type: <prop-encoded-array> - Definition: reference to the xo clock to be held on behalf of the - booting Hexagon core + Definition: reference to the xo clock and optionally aggre2 clock to be + held on behalf of the booting Hexagon core - clock-names: Usage: required Value type: <stringlist> - Definition: must be "xo" + Definition: must be "xo" and optionally include "aggre2" - cx-supply: Usage: required @@ -38,6 +39,12 @@ on the Qualcomm ADSP Hexagon core. Definition: reference to the regulator to be held on behalf of the booting Hexagon core +- px-supply: + Usage: required + Value type: <phandle> + Definition: reference to the px regulator to be held on behalf of the + booting Hexagon core + - memory-region: Usage: required Value type: <phandle> @@ -96,3 +103,31 @@ ADSP, as it is found on MSM8974 boards. qcom,smd-edge = <1>; }; }; + +The following example describes the resources needed to boot control the +SLPI, as it is found on MSM8996 boards. + + slpi { + compatible = "qcom,msm8996-slpi-pil"; + interrupts-extended = <&intc 0 390 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmcc MSM8996_RPM_SMD_XO_CLK_SRC>, + <&rpmcc MSM8996_RPM_SMD_AGGR2_NOC_CLK>; + clock-names = "xo", "aggre2"; + + cx-supply = <&pm8994_l26>; + px-supply = <&pm8994_lvs2>; + + memory-region = <&slpi_region>; + qcom,smem-states = <&slpi_smp2p_out 0>; + qcom,smem-state-names = "stop"; + }; diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt index 57cb49ec55ca..92347fe6890e 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt @@ -7,7 +7,9 @@ on the Qualcomm Hexagon core. Usage: required Value type: <string> Definition: must be one of: - "qcom,q6v5-pil" + "qcom,q6v5-pil", + "qcom,msm8916-mss-pil", + "qcom,msm8974-mss-pil" - reg: Usage: required diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt new file mode 100644 index 000000000000..2bf3344b2a02 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt @@ -0,0 +1,43 @@ +Hisilicon System Reset Controller +====================================== + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +The reset controller registers are part of the system-ctl block on +hi3660 SoC. + +Required properties: +- compatible: should be + "hisilicon,hi3660-reset" +- hisi,rst-syscon: phandle of the reset's syscon. +- #reset-cells : Specifies the number of cells needed to encode a + reset source. The type shall be a <u32> and the value shall be 2. + + Cell #1 : offset of the reset assert control + register from the syscon register base + offset + 4: deassert control register + offset + 8: status control register + Cell #2 : bit position of the reset in the reset control register + +Example: + iomcu: iomcu@ffd7e000 { + compatible = "hisilicon,hi3660-iomcu", "syscon"; + reg = <0x0 0xffd7e000 0x0 0x1000>; + }; + + iomcu_rst: iomcu_rst_controller { + compatible = "hisilicon,hi3660-reset"; + hisi,rst-syscon = <&iomcu>; + #reset-cells = <2>; + }; + +Specifying reset lines connected to IP modules +============================================== +example: + + i2c0: i2c@..... { + ... + resets = <&iomcu_rst 0x20 3>; /* offset: 0x20; bit: 3 */ + ... + }; diff --git a/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt b/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt index 164c7f34c451..c516d24959f2 100644 --- a/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt +++ b/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt @@ -63,7 +63,7 @@ Example: -------- The following example demonstrates a syscon node, the reset controller node using the syscon node, and a consumer (a DSP device) on the TI Keystone 2 -Edison SoC. +66AK2E SoC. / { soc { @@ -71,13 +71,13 @@ Edison SoC. compatible = "syscon", "simple-mfd"; reg = <0x02350000 0x1000>; - pscrst: psc-reset { + pscrst: reset-controller { compatible = "ti,k2e-pscrst", "ti,syscon-reset"; #reset-cells = <1>; ti,reset-bits = < - 0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_SET|DEASSERT_CLEAR|STATUS_SET) /* 0: pcrst-dsp0 */ - 0xa40 5 0xa44 3 0 0 (ASSERT_SET|DEASSERT_CLEAR|STATUS_NONE) /* 1: pcrst-example */ + 0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */ + 0xa40 5 0xa44 3 0 0 (ASSERT_SET | DEASSERT_CLEAR | STATUS_NONE) /* 1: example */ >; }; }; diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt index 5020524cddeb..83ab0f599c40 100644 --- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt @@ -6,14 +6,14 @@ System reset Required properties: - compatible: should be one of the following: - "socionext,uniphier-sld3-reset" - for sLD3 SoC. - "socionext,uniphier-ld4-reset" - for LD4 SoC. - "socionext,uniphier-pro4-reset" - for Pro4 SoC. - "socionext,uniphier-sld8-reset" - for sLD8 SoC. - "socionext,uniphier-pro5-reset" - for Pro5 SoC. - "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC. - "socionext,uniphier-ld11-reset" - for LD11 SoC. - "socionext,uniphier-ld20-reset" - for LD20 SoC. + "socionext,uniphier-sld3-reset" - for sLD3 SoC + "socionext,uniphier-ld4-reset" - for LD4 SoC + "socionext,uniphier-pro4-reset" - for Pro4 SoC + "socionext,uniphier-sld8-reset" - for sLD8 SoC + "socionext,uniphier-pro5-reset" - for Pro5 SoC + "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC + "socionext,uniphier-ld11-reset" - for LD11 SoC + "socionext,uniphier-ld20-reset" - for LD20 SoC - #reset-cells: should be 1. Example: @@ -37,14 +37,15 @@ Media I/O (MIO) reset, SD reset Required properties: - compatible: should be one of the following: - "socionext,uniphier-sld3-mio-reset" - for sLD3 SoC. - "socionext,uniphier-ld4-mio-reset" - for LD4 SoC. - "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC. - "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC. - "socionext,uniphier-pro5-sd-reset" - for Pro5 SoC. - "socionext,uniphier-pxs2-sd-reset" - for PXs2/LD6b SoC. - "socionext,uniphier-ld11-mio-reset" - for LD11 SoC. - "socionext,uniphier-ld20-sd-reset" - for LD20 SoC. + "socionext,uniphier-sld3-mio-reset" - for sLD3 SoC + "socionext,uniphier-ld4-mio-reset" - for LD4 SoC + "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC + "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC + "socionext,uniphier-pro5-sd-reset" - for Pro5 SoC + "socionext,uniphier-pxs2-sd-reset" - for PXs2/LD6b SoC + "socionext,uniphier-ld11-mio-reset" - for LD11 SoC (MIO) + "socionext,uniphier-ld11-sd-reset" - for LD11 SoC (SD) + "socionext,uniphier-ld20-sd-reset" - for LD20 SoC - #reset-cells: should be 1. Example: @@ -68,13 +69,13 @@ Peripheral reset Required properties: - compatible: should be one of the following: - "socionext,uniphier-ld4-peri-reset" - for LD4 SoC. - "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC. - "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC. - "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC. - "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC. - "socionext,uniphier-ld11-peri-reset" - for LD11 SoC. - "socionext,uniphier-ld20-peri-reset" - for LD20 SoC. + "socionext,uniphier-ld4-peri-reset" - for LD4 SoC + "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC + "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC + "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC + "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC + "socionext,uniphier-ld11-peri-reset" - for LD11 SoC + "socionext,uniphier-ld20-peri-reset" - for LD20 SoC - #reset-cells: should be 1. Example: diff --git a/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt b/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt new file mode 100644 index 000000000000..b015508f9780 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt @@ -0,0 +1,20 @@ +ZTE zx2967 SoCs Reset Controller +======================================= + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required properties: +- compatible: should be one of the following. + * zte,zx296718-reset +- reg: physical base address of the controller and length of memory mapped + region. +- #reset-cells: must be 1. + +example: + + reset: reset-controller@1461060 { + compatible = "zte,zx296718-reset"; + reg = <0x01461060 0x8>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt b/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt index 2eb9d4ee7dc0..c3c9a1226f9a 100644 --- a/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt @@ -1,9 +1,11 @@ -* Real Time Clock of the Armada 38x SoCs +* Real Time Clock of the Armada 38x/7K/8K SoCs -RTC controller for the Armada 38x SoCs +RTC controller for the Armada 38x, 7K and 8K SoCs Required properties: -- compatible : Should be "marvell,armada-380-rtc" +- compatible : Should be one of the following: + "marvell,armada-380-rtc" for Armada 38x SoC + "marvell,armada-8k-rtc" for Aramda 7K/8K SoCs - reg: a list of base address and size pairs, one for each entry in reg-names - reg names: should contain: diff --git a/Documentation/devicetree/bindings/rtc/cortina,gemini.txt b/Documentation/devicetree/bindings/rtc/cortina,gemini.txt new file mode 100644 index 000000000000..4ce4e794ddbb --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/cortina,gemini.txt @@ -0,0 +1,14 @@ +* Cortina Systems Gemini RTC + +Gemini SoC real-time clock. + +Required properties: +- compatible : Should be "cortina,gemini-rtc" + +Examples: + +rtc@45000000 { + compatible = "cortina,gemini-rtc"; + reg = <0x45000000 0x100>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/rtc/imxdi-rtc.txt b/Documentation/devicetree/bindings/rtc/imxdi-rtc.txt index c9d80d7da141..323cf26374cb 100644 --- a/Documentation/devicetree/bindings/rtc/imxdi-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/imxdi-rtc.txt @@ -8,10 +8,13 @@ Required properties: region. - interrupts: rtc alarm interrupt +Optional properties: +- interrupts: dryice security violation interrupt + Example: rtc@80056000 { compatible = "fsl,imx53-rtc", "fsl,imx25-rtc"; reg = <0x80056000 2000>; - interrupts = <29>; + interrupts = <29 56>; }; diff --git a/Documentation/devicetree/bindings/rtc/maxim,ds3231.txt b/Documentation/devicetree/bindings/rtc/maxim,ds3231.txt index 1ad4c1c2b3b3..85be53a42180 100644 --- a/Documentation/devicetree/bindings/rtc/maxim,ds3231.txt +++ b/Documentation/devicetree/bindings/rtc/maxim,ds3231.txt @@ -1,7 +1,8 @@ * Maxim DS3231 Real Time Clock Required properties: -see: Documentation/devicetree/bindings/i2c/trivial-admin-guide/devices.rst +- compatible: Should contain "maxim,ds3231". +- reg: I2C address for chip. Optional property: - #clock-cells: Should be 1. diff --git a/Documentation/devicetree/bindings/rtc/pcf8563.txt b/Documentation/devicetree/bindings/rtc/pcf8563.txt index 086c998c5561..36984acbb383 100644 --- a/Documentation/devicetree/bindings/rtc/pcf8563.txt +++ b/Documentation/devicetree/bindings/rtc/pcf8563.txt @@ -3,7 +3,8 @@ Philips PCF8563/Epson RTC8564 Real Time Clock Required properties: -see: Documentation/devicetree/bindings/i2c/trivial-admin-guide/devices.rst +- compatible: Should contain "nxp,pcf8563". +- reg: I2C address for chip. Optional property: - #clock-cells: Should be 0. diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt new file mode 100644 index 000000000000..e2837b951237 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt @@ -0,0 +1,27 @@ +STM32 Real Time Clock + +Required properties: +- compatible: "st,stm32-rtc". +- reg: address range of rtc register set. +- clocks: reference to the clock entry ck_rtc. +- interrupt-parent: phandle for the interrupt controller. +- interrupts: rtc alarm interrupt. +- st,syscfg: phandle for pwrcfg, mandatory to disable/enable backup domain + (RTC registers) write protection. + +Optional properties (to override default ck_rtc parent clock): +- assigned-clocks: reference to the ck_rtc clock entry. +- assigned-clock-parents: phandle of the new parent clock of ck_rtc. + +Example: + + rtc: rtc@40002800 { + compatible = "st,stm32-rtc"; + reg = <0x40002800 0x400>; + clocks = <&rcc 1 CLK_RTC>; + assigned-clocks = <&rcc 1 CLK_RTC>; + assigned-clock-parents = <&rcc 1 CLK_LSE>; + interrupt-parent = <&exti>; + interrupts = <17 1>; + st,syscfg = <&pwrcfg>; + }; diff --git a/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt b/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt index f007e428a1ab..945934918b71 100644 --- a/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt @@ -8,10 +8,20 @@ Required properties: memory mapped region. - interrupts : IRQ lines for the RTC alarm 0 and alarm 1, in that order. +Required properties for new device trees +- clocks : phandle to the 32kHz external oscillator +- clock-output-names : name of the LOSC clock created +- #clock-cells : must be equals to 1. The RTC provides two clocks: the + LOSC and its external output, with index 0 and 1 + respectively. + Example: rtc: rtc@01f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; interrupts = <0 40 4>, <0 41 4>; + clock-output-names = "osc32k"; + clocks = <&ext_osc32k>; + #clock-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt index f86bb06c39e9..10276a46ecef 100644 --- a/Documentation/devicetree/bindings/serial/8250.txt +++ b/Documentation/devicetree/bindings/serial/8250.txt @@ -19,6 +19,7 @@ Required properties: - "altr,16550-FIFO128" - "fsl,16550-FIFO64" - "fsl,ns16550" + - "ti,da830-uart" - "serial" if the port type is unknown. - reg : offset and length of the register set for the device. - interrupts : should contain uart interrupt. diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt index 1e82802d8e32..574c3a2c77d5 100644 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt @@ -6,11 +6,13 @@ Required properties: - interrupts : Should contain uart interrupt Optional properties: -- uart-has-rtscts : Indicate the uart has rts and cts - fsl,irda-mode : Indicate the uart supports irda mode - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works in DCE mode by default. +Please check Documentation/devicetree/bindings/serial/serial.txt +for the complete list of generic properties. + Note: Each uart controller should have an alias correctly numbered in "aliases" node. diff --git a/Documentation/devicetree/bindings/serial/serial.txt b/Documentation/devicetree/bindings/serial/serial.txt index fd970f76a7b8..b542a0ecf06e 100644 --- a/Documentation/devicetree/bindings/serial/serial.txt +++ b/Documentation/devicetree/bindings/serial/serial.txt @@ -23,7 +23,8 @@ Optional properties: they are available for use (wired and enabled by pinmux configuration). This depends on both the UART hardware and the board wiring. Note that this property is mutually-exclusive with "cts-gpios" and - "rts-gpios" above. + "rts-gpios" above, unless support is provided to switch between modes + dynamically. Examples: diff --git a/Documentation/devicetree/bindings/serial/slave-device.txt b/Documentation/devicetree/bindings/serial/slave-device.txt new file mode 100644 index 000000000000..f66037928f5f --- /dev/null +++ b/Documentation/devicetree/bindings/serial/slave-device.txt @@ -0,0 +1,36 @@ +Serial Slave Device DT binding + +This documents the binding structure and common properties for serial +attached devices. Common examples include Bluetooth, WiFi, NFC and GPS +devices. + +Serial attached devices shall be a child node of the host UART device the +slave device is attached to. It is expected that the attached device is +the only child node of the UART device. The slave device node name shall +reflect the generic type of device for the node. + +Required Properties: + +- compatible : A string reflecting the vendor and specific device the node + represents. + +Optional Properties: + +- max-speed : The maximum baud rate the device operates at. This should + only be present if the maximum is less than the slave device + can support. For example, a particular board has some signal + quality issue or the host processor can't support higher + baud rates. + +Example: + +serial@1234 { + compatible = "ns16550a"; + interrupts = <1>; + + bluetooth { + compatible = "brcm,bcm43341-bt"; + interrupt-parent = <&gpio>; + interrupts = <10>; + }; +}; diff --git a/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt b/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt index 47e46ccbc170..5a34f3ab7bea 100644 --- a/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt +++ b/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt @@ -5,7 +5,6 @@ Copyright (C) 2008 - 2014 Freescale Semiconductor Inc. CONTENTS - QMan Portal - - QMan Pool Channel - Example QMan Portal Node @@ -82,25 +81,6 @@ These subnodes should have the following properties: Definition: The phandle to the particular hardware device that this portal is connected to. -DPAA QMan Pool Channel Nodes - -Pool Channels are defined with the following properties. - -PROPERTIES - -- compatible - Usage: Required - Value type: <stringlist> - Definition: Must include "fsl,qman-pool-channel" - May include "fsl,<SoC>-qman-pool-channel" - -- fsl,qman-channel-id - Usage: Required - Value type: <u32> - Definition: The hardware index of the channel. This can also be - determined by dividing any of the channel's 8 work queue - IDs by 8 - EXAMPLE The example below shows a (P4080) QMan portals container/bus node with two portals diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.txt b/Documentation/devicetree/bindings/soc/rockchip/grf.txt index 013e71a2cdc7..a0685c209218 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.txt +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.txt @@ -5,20 +5,24 @@ is composed of many registers for system control. From RK3368 SoCs, the GRF is divided into two sections, - GRF, used for general non-secure system, +- SGRF, used for general secure system, - PMUGRF, used for always on system Required Properties: -- compatible: GRF should be one of the followings +- compatible: GRF should be one of the following: + - "rockchip,rk3036-grf", "syscon": for rk3036 - "rockchip,rk3066-grf", "syscon": for rk3066 - "rockchip,rk3188-grf", "syscon": for rk3188 - "rockchip,rk3228-grf", "syscon": for rk3228 - "rockchip,rk3288-grf", "syscon": for rk3288 - "rockchip,rk3368-grf", "syscon": for rk3368 - "rockchip,rk3399-grf", "syscon": for rk3399 -- compatible: PMUGRF should be one of the followings +- compatible: PMUGRF should be one of the following: - "rockchip,rk3368-pmugrf", "syscon": for rk3368 - "rockchip,rk3399-pmugrf", "syscon": for rk3399 +- compatible: SGRF should be one of the following + - "rockchip,rk3288-sgrf", "syscon": for rk3288 - reg: physical base address of the controller and length of memory mapped region. diff --git a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt index f909ce06afc4..01bfb6745fbd 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt +++ b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt @@ -6,6 +6,7 @@ powered up/down by software based on different application scenes to save power. Required properties for power domain controller: - compatible: Should be one of the following. "rockchip,rk3288-power-controller" - for RK3288 SoCs. + "rockchip,rk3328-power-controller" - for RK3328 SoCs. "rockchip,rk3368-power-controller" - for RK3368 SoCs. "rockchip,rk3399-power-controller" - for RK3399 SoCs. - #power-domain-cells: Number of cells in a power-domain specifier. @@ -16,6 +17,7 @@ Required properties for power domain controller: Required properties for power domain sub nodes: - reg: index of the power domain, should use macros in: "include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain. + "include/dt-bindings/power/rk3328-power.h" - for RK3328 type power domain. "include/dt-bindings/power/rk3368-power.h" - for RK3368 type power domain. "include/dt-bindings/power/rk3399-power.h" - for RK3399 type power domain. - clocks (optional): phandles to clocks which need to be enabled while power domain @@ -90,6 +92,7 @@ containing a phandle to the power device node and an index specifying which power domain to use. The index should use macros in: "include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain. + "include/dt-bindings/power/rk3328-power.h" - for rk3328 type power domain. "include/dt-bindings/power/rk3368-power.h" - for rk3368 type power domain. "include/dt-bindings/power/rk3399-power.h" - for rk3399 type power domain. diff --git a/Documentation/devicetree/bindings/soc/zte/pd-2967xx.txt b/Documentation/devicetree/bindings/soc/zte/pd-2967xx.txt new file mode 100644 index 000000000000..7629de1c2c72 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/zte/pd-2967xx.txt @@ -0,0 +1,19 @@ +* ZTE zx2967 family Power Domains + +zx2967 family includes support for multiple power domains which are used +to gate power to one or more peripherals on the processor. + +Required Properties: + - compatible: should be one of the following. + * zte,zx296718-pcu - for zx296718 power domain. + - reg: physical base address of the controller and length of memory mapped + region. + - #power-domain-cells: Must be 1. + +Example: + + pcu_domain: pcu@117000 { + compatible = "zte,zx296718-pcu"; + reg = <0x00117000 0x1000>; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt index 5b9b38f578bb..fdb25b492514 100644 --- a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt +++ b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt @@ -2,8 +2,7 @@ Devicetree bindings for the Axentia TSE-850 audio complex Required properties: - compatible: "axentia,tse850-pcm5142" - - axentia,ssc-controller: The phandle of the atmel SSC controller used as - cpu dai. + - axentia,cpu-dai: The phandle of the cpu dai. - axentia,audio-codec: The phandle of the PCM5142 codec. - axentia,add-gpios: gpio specifier that controls the mixer. - axentia,loop1-gpios: gpio specifier that controls loop relays on channel 1. @@ -43,6 +42,12 @@ the PCM5142 codec. Example: + &ssc0 { + #sound-dai-cells = <0>; + + status = "okay"; + }; + &i2c { codec: pcm5142@4c { compatible = "ti,pcm5142"; @@ -77,7 +82,7 @@ Example: sound { compatible = "axentia,tse850-pcm5142"; - axentia,ssc-controller = <&ssc0>; + axentia,cpu-dai = <&ssc0>; axentia,audio-codec = <&codec>; axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>; diff --git a/Documentation/devicetree/bindings/sound/es8328.txt b/Documentation/devicetree/bindings/sound/es8328.txt index 30ea8a318ae9..33fbf058c997 100644 --- a/Documentation/devicetree/bindings/sound/es8328.txt +++ b/Documentation/devicetree/bindings/sound/es8328.txt @@ -4,7 +4,7 @@ This device supports both I2C and SPI. Required properties: - - compatible : "everest,es8328" + - compatible : Should be "everest,es8328" or "everest,es8388" - DVDD-supply : Regulator providing digital core supply voltage 1.8 - 3.6V - AVDD-supply : Regulator providing analog supply voltage 3.3V - PVDD-supply : Regulator providing digital IO supply voltage 1.8 - 3.6V diff --git a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt index 3e623a724e55..9800a560e0c2 100644 --- a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt +++ b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt @@ -4,6 +4,7 @@ Required properties: - compatible = "mediatek,mt2701-audio"; - reg: register location and size - interrupts: Should contain AFE interrupt +- power-domains: should define the power domain - clock-names: should have these clock names: "infra_sys_audio_clk", "top_audio_mux1_sel", @@ -58,6 +59,7 @@ Example: <0 0x112A0000 0 0x20000>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>, <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; clocks = <&infracfg CLK_INFRA_AUDIO>, <&topckgen CLK_TOP_AUD_MUX1_SEL>, <&topckgen CLK_TOP_AUD_MUX2_SEL>, diff --git a/Documentation/devicetree/bindings/sound/nau8540.txt b/Documentation/devicetree/bindings/sound/nau8540.txt new file mode 100644 index 000000000000..307a76528320 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nau8540.txt @@ -0,0 +1,16 @@ +NAU85L40 audio CODEC + +This device supports I2C only. + +Required properties: + + - compatible : "nuvoton,nau8540" + + - reg : the I2C address of the device. + +Example: + +codec: nau8540@1c { + compatible = "nuvoton,nau8540"; + reg = <0x1c>; +}; diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt b/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt new file mode 100644 index 000000000000..2539e1d68107 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt @@ -0,0 +1,36 @@ +ROCKCHIP RK3288 with HDMI and analog audio + +Required properties: +- compatible: "rockchip,rk3288-hdmi-analog" +- rockchip,model: The user-visible name of this sound complex +- rockchip,i2s-controller: The phandle of the Rockchip I2S controller that's + connected to the CODEC +- rockchip,audio-codec: The phandle of the analog audio codec. +- rockchip,routing: A list of the connections between audio components. + Each entry is a pair of strings, the first being the + connection's sink, the second being the connection's + source. For this driver the first string should always be + "Analog". + +Optionnal properties: +- rockchip,hp-en-gpios = The phandle of the GPIO that power up/down the + headphone (when the analog output is an headphone). +- rockchip,hp-det-gpios = The phandle of the GPIO that detects the headphone + (when the analog output is an headphone). +- pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt + +Example: + +sound { + compatible = "rockchip,rockchip-audio-es8388"; + rockchip,model = "Analog audio output"; + rockchip,i2s-controller = <&i2s>; + rockchip,audio-codec = <&es8388>; + rockchip,routing = "Analog", "LOUT2", + "Analog", "ROUT2"; + rockchip,hp-en-gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>; + rockchip,hp-det-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&headphone>; +}; + diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt index 4ea29aa9af59..a6600f6dea64 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt @@ -5,7 +5,7 @@ audio data transfer between devices in the system. Required properties: -- compatible: should be one of the followings +- compatible: should be one of the following: - "rockchip,rk3066-i2s": for rk3066 - "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188 - "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288 @@ -17,7 +17,7 @@ Required properties: Documentation/devicetree/bindings/dma/dma.txt - dma-names: should include "tx" and "rx". - clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names. -- clock-names: should contain followings: +- clock-names: should contain the following: - "i2s_hclk": clock for I2S BUS - "i2s_clk" : clock for I2S controller - rockchip,playback-channels: max playback channels, if not set, 8 channels default. diff --git a/Documentation/devicetree/bindings/sound/rt5665.txt b/Documentation/devicetree/bindings/sound/rt5665.txt index 419c89219681..419c89219681 100755..100644 --- a/Documentation/devicetree/bindings/sound/rt5665.txt +++ b/Documentation/devicetree/bindings/sound/rt5665.txt diff --git a/Documentation/devicetree/bindings/sound/sun4i-codec.txt b/Documentation/devicetree/bindings/sound/sun4i-codec.txt index 3033bd8aab0f..3863531d1e6d 100644 --- a/Documentation/devicetree/bindings/sound/sun4i-codec.txt +++ b/Documentation/devicetree/bindings/sound/sun4i-codec.txt @@ -14,7 +14,7 @@ Required properties: - dma-names: should include "tx" and "rx". - clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names. -- clock-names: should contain followings: +- clock-names: should contain the following: - "apb": the parent APB clock for this controller - "codec": the parent module clock diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt index 7b526ec64991..ee21da865771 100644 --- a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt +++ b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt @@ -5,8 +5,9 @@ audio data transfer between devices in the system. Required properties: -- compatible: should be one of the followings +- compatible: should be one of the following: - "allwinner,sun4i-a10-i2s" + - "allwinner,sun6i-a31-i2s" - reg: physical base address of the controller and length of memory mapped region. - interrupts: should contain the I2S interrupt. @@ -14,11 +15,15 @@ Required properties: Documentation/devicetree/bindings/dma/dma.txt - dma-names: should include "tx" and "rx". - clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names. -- clock-names: should contain followings: +- clock-names: should contain the following: - "apb" : clock for the I2S bus interface - "mod" : module clock for the I2S controller - #sound-dai-cells : Must be equal to 0 +Required properties for the following compatibles: + - "allwinner,sun6i-a31-i2s" +- resets: phandle to the reset line for this codec + Example: i2s0: i2s@01c22400 { diff --git a/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt b/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt new file mode 100644 index 000000000000..399b1b4bae22 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt @@ -0,0 +1,63 @@ +Allwinner SUN8I audio codec +------------------------------------ + +On Sun8i-A33 SoCs, the audio is separated in different parts: + - A DAI driver. It uses the "sun4i-i2s" driver which is + documented here: + Documentation/devicetree/bindings/sound/sun4i-i2s.txt + - An analog part of the codec which is handled as PRCM registers. + See Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt + - An digital part of the codec which is documented in this current + binding documentation. + - And finally, an audio card which links all the above components. + The simple-audio card will be used. + See Documentation/devicetree/bindings/sound/simple-card.txt + +This bindings documentation exposes Sun8i codec (digital part). + +Required properties: +- compatible: must be "allwinner,sun8i-a33-codec" +- reg: must contain the registers location and length +- interrupts: must contain the codec interrupt +- clocks: a list of phandle + clock-specifer pairs, one for each entry + in clock-names. +- clock-names: should contain followings: + - "bus": the parent APB clock for this controller + - "mod": the parent module clock + +Here is an example to add a sound card and the codec binding on sun8i SoCs that +are similar to A33 using simple-card: + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "sun8i-a33-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&link_codec>; + simple-audio-card,bitclock-master = <&link_codec>; + simple-audio-card,mclk-fs = <512>; + simple-audio-card,aux-devs = <&codec_analog>; + simple-audio-card,routing = + "Left DAC", "Digital Left DAC", + "Right DAC", "Digital Right DAC"; + + simple-audio-card,cpu { + sound-dai = <&dai>; + }; + + link_codec: simple-audio-card,codec { + sound-dai = <&codec>; + }; + + soc@01c00000 { + [...] + + audio-codec@1c22e00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-a33-codec"; + reg = <0x01c22e00 0x400>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; + clock-names = "bus", "mod"; + }; + }; + diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt index 0230c4d20506..fe0a65e6d629 100644 --- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt +++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt @@ -10,6 +10,7 @@ Required properties: - compatible : should be one of the following: - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC + - "allwinner,sun8i-h3-spdif": for the Allwinner H3 SoC - reg : Offset and length of the register set for the device. diff --git a/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt b/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt index 7e5aa6f6b5a1..292ad5083704 100644 --- a/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt +++ b/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt @@ -1,10 +1,12 @@ ZTE ZX296702 I2S controller Required properties: - - compatible : Must be "zte,zx296702-i2s" + - compatible : Must be one of: + "zte,zx296718-i2s", "zte,zx296702-i2s" + "zte,zx296702-i2s" - reg : Must contain I2S core's registers location and length - clocks : Pairs of phandle and specifier referencing the controller's clocks. - - clock-names: "tx" for the clock to the I2S interface. + - clock-names: "wclk" for the wclk, "pclk" for the pclk to the I2S interface. - dmas: Pairs of phandle and specifier for the DMA channel that is used by the core. The core expects two dma channels for transmit. - dma-names : Must be "tx" and "rx" @@ -16,12 +18,12 @@ please check: * dma/dma.txt Example: - i2s0: i2s0@0b005000 { + i2s0: i2s@b005000 { #sound-dai-cells = <0>; - compatible = "zte,zx296702-i2s"; + compatible = "zte,zx296718-i2s", "zte,zx296702-i2s"; reg = <0x0b005000 0x1000>; - clocks = <&lsp0clk ZX296702_I2S0_DIV>; - clock-names = "tx"; + clocks = <&audiocrm AUDIO_I2S0_WCLK>, <&audiocrm AUDIO_I2S0_PCLK>; + clock-names = "wclk", "pclk"; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; dmas = <&dma 5>, <&dma 6>; dma-names = "tx", "rx"; diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt index da6614c63796..dc975064fa27 100644 --- a/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt @@ -1,17 +1,23 @@ Renesas MSIOF spi controller Required properties: -- compatible : "renesas,msiof-<soctype>" for SoCs, - "renesas,sh-msiof" for SuperH, or - "renesas,sh-mobile-msiof" for SH Mobile series. - Examples with soctypes are: - "renesas,msiof-r8a7790" (R-Car H2) +- compatible : "renesas,msiof-r8a7790" (R-Car H2) "renesas,msiof-r8a7791" (R-Car M2-W) "renesas,msiof-r8a7792" (R-Car V2H) "renesas,msiof-r8a7793" (R-Car M2-N) "renesas,msiof-r8a7794" (R-Car E2) "renesas,msiof-r8a7796" (R-Car M3-W) "renesas,msiof-sh73a0" (SH-Mobile AG5) + "renesas,sh-mobile-msiof" (generic SH-Mobile compatibile device) + "renesas,rcar-gen2-msiof" (generic R-Car Gen2 compatible device) + "renesas,rcar-gen3-msiof" (generic R-Car Gen3 compatible device) + "renesas,sh-msiof" (deprecated) + + When compatible with the generic version, nodes + must list the SoC-specific version corresponding + to the platform first followed by the generic + version. + - reg : A list of offsets and lengths of the register sets for the device. If only one register set is present, it is to be used @@ -61,7 +67,8 @@ Documentation/devicetree/bindings/pinctrl/renesas,*. Example: msiof0: spi@e6e20000 { - compatible = "renesas,msiof-r8a7791"; + compatible = "renesas,msiof-r8a7791", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e20000 0 0x0064>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; diff --git a/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt new file mode 100644 index 000000000000..6069b95a883d --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt @@ -0,0 +1,29 @@ +Lantiq Synchronous Serial Controller (SSC) SPI master driver + +Required properties: +- compatible: "lantiq,ase-spi", "lantiq,falcon-spi", "lantiq,xrx100-spi" +- #address-cells: see spi-bus.txt +- #size-cells: see spi-bus.txt +- reg: address and length of the spi master registers +- interrupts: should contain the "spi_rx", "spi_tx" and "spi_err" interrupt. + + +Optional properties: +- clocks: spi clock phandle +- num-cs: see spi-bus.txt, set to 8 if unset +- base-cs: the number of the first chip select, set to 1 if unset. + +Example: + + +spi: spi@E100800 { + compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi"; + reg = <0xE100800 0x100>; + interrupt-parent = <&icu0>; + interrupts = <22 23 24>; + interrupt-names = "spi_rx", "spi_tx", "spi_err"; + #address-cells = <1>; + #size-cells = <1>; + num-cs = <6>; + base-cs = <1>; +}; diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt index d2ca153614f9..83da4931d832 100644 --- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt @@ -31,6 +31,10 @@ Optional Properties: - rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling Rx data (may need to be fine tuned for high capacitance lines). No delay (0) by default. +- pinctrl-names: Names for the pin configuration(s); may be "default" or + "sleep", where the "sleep" configuration may describe the state + the pins should be in during system suspend. See also + pinctrl/pinctrl-bindings.txt. Example: @@ -46,4 +50,7 @@ Example: interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; clock-names = "spiclk", "apb_pclk"; + pinctrl-0 = <&spi1_pins>; + pinctrl-1 = <&spi1_sleep>; + pinctrl-names = "default", "sleep"; }; diff --git a/Documentation/devicetree/bindings/sram/sram.txt b/Documentation/devicetree/bindings/sram/sram.txt index 068c2c03c38f..267da4410aef 100644 --- a/Documentation/devicetree/bindings/sram/sram.txt +++ b/Documentation/devicetree/bindings/sram/sram.txt @@ -42,6 +42,12 @@ Optional properties in the area nodes: and in use by another device or devices - export : indicates that the reserved SRAM area may be accessed outside of the kernel, e.g. by bootloader or userspace +- protect-exec : Same as 'pool' above but with the additional + constraint that code wil be run from the region and + that the memory is maintained as read-only, executable + during code execution. NOTE: This region must be page + aligned on start and end in order to properly allow + manipulation of the page attributes. - label : the name for the reserved partition, if omitted, the label is taken from the node name excluding the unit address. diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt index 66223d561972..20ca4ef9d776 100644 --- a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt @@ -17,6 +17,12 @@ Required properties: calibration data, as specified by the SoC reference manual. The first cell of each pair is the value to be written to TTCFGR, and the second is the value to be written to TSCFGR. +- #thermal-sensor-cells : Must be 1. The sensor specifier is the monitoring + site ID, and represents the "n" in TRITSRn and TRATSRn. + +Optional property: +- little-endian : If present, the TMU registers are little endian. If absent, + the default is big endian. Example: @@ -60,4 +66,5 @@ tmu@f0000 { 0x00030000 0x00000012 0x00030001 0x0000001d>; + #thermal-sensor-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt new file mode 100644 index 000000000000..07a9713ae6a7 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt @@ -0,0 +1,56 @@ +* DT bindings for Renesas R-Car Gen3 Thermal Sensor driver + +On R-Car Gen3 SoCs, the thermal sensor controllers (TSC) control the thermal +sensors (THS) which are the analog circuits for measuring temperature (Tj) +inside the LSI. + +Required properties: +- compatible : "renesas,<soctype>-thermal", + Examples with soctypes are: + - "renesas,r8a7795-thermal" (R-Car H3) + - "renesas,r8a7796-thermal" (R-Car M3-W) +- reg : Address ranges of the thermal registers. Each sensor + needs one address range. Sorting must be done in + increasing order according to datasheet, i.e. + TSC1, TSC2, ... +- clocks : Must contain a reference to the functional clock. +- #thermal-sensor-cells : must be <1>. + +Optional properties: + +- interrupts : interrupts routed to the TSC (3 for H3 and M3-W) +- power-domain : Must contain a reference to the power domain. This + property is mandatory if the thermal sensor instance + is part of a controllable power domain. + +Example: + + tsc: thermal@e6198000 { + compatible = "renesas,r8a7795-thermal"; + reg = <0 0xe6198000 0 0x68>, + <0 0xe61a0000 0 0x5c>, + <0 0xe61a8000 0 0x5c>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #thermal-sensor-cells = <1>; + status = "okay"; + }; + + thermal-zones { + sensor_thermal1: sensor-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt b/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt new file mode 100644 index 000000000000..3dc1c6bf0478 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt @@ -0,0 +1,116 @@ +* ZTE zx2967 family Thermal + +Required Properties: +- compatible: should be one of the following. + * zte,zx296718-thermal +- reg: physical base address of the controller and length of memory mapped + region. +- clocks : Pairs of phandle and specifier referencing the controller's clocks. +- clock-names: "topcrm" for the topcrm clock. + "apb" for the apb clock. +- #thermal-sensor-cells: must be 0. + +Please note: slope coefficient defined in thermal-zones section need to be +multiplied by 1000. + +Example for tempsensor: + + tempsensor: tempsensor@148a000 { + compatible = "zte,zx296718-thermal"; + reg = <0x0148a000 0x20>; + clocks = <&topcrm TEMPSENSOR_GATE>, <&audiocrm AUDIO_TS_PCLK>; + clock-names = "topcrm", "apb"; + #thermal-sensor-cells = <0>; + }; + +Example for cooling device: + + cooling_dev: cooling_dev { + cluster0_cooling_dev: cluster0-cooling-dev { + #cooling-cells = <2>; + cpumask = <0xf>; + capacitance = <1500>; + }; + + cluster1_cooling_dev: cluster1-cooling-dev { + #cooling-cells = <2>; + cpumask = <0x30>; + capacitance = <2000>; + }; + }; + +Example for thermal zones: + + thermal-zones { + zx296718_thermal: zx296718_thermal { + polling-delay-passive = <500>; + polling-delay = <1000>; + sustainable-power = <6500>; + + thermal-sensors = <&tempsensor 0>; + /* + * slope need to be multiplied by 1000. + */ + coefficients = <1951 (-922)>; + + trips { + trip0: switch_on_temperature { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip1: desired_temperature { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; + + crit: critical_temperature { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&trip0>; + cooling-device = <&gpu 2 5>; + }; + + map1 { + trip = <&trip0>; + cooling-device = <&cluster0_cooling_dev 1 2>; + }; + + map2 { + trip = <&trip1>; + cooling-device = <&cluster0_cooling_dev 1 2>; + }; + + map3 { + trip = <&crit>; + cooling-device = <&cluster0_cooling_dev 1 2>; + }; + + map4 { + trip = <&trip0>; + cooling-device = <&cluster1_cooling_dev 1 2>; + contribution = <9000>; + }; + + map5 { + trip = <&trip1>; + cooling-device = <&cluster1_cooling_dev 1 2>; + contribution = <4096>; + }; + + map6 { + trip = <&crit>; + cooling-device = <&cluster1_cooling_dev 1 2>; + contribution = <4096>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/timer/cortina,gemini-timer.txt b/Documentation/devicetree/bindings/timer/cortina,gemini-timer.txt new file mode 100644 index 000000000000..16ea1d3b2e9e --- /dev/null +++ b/Documentation/devicetree/bindings/timer/cortina,gemini-timer.txt @@ -0,0 +1,22 @@ +Cortina Systems Gemini timer + +This timer is embedded in the Cortina Systems Gemini SoCs. + +Required properties: + +- compatible : Must be "cortina,gemini-timer" +- reg : Should contain registers location and length +- interrupts : Should contain the three timer interrupts with + flags for rising edge +- syscon : a phandle to the global Gemini system controller + +Example: + +timer@43000000 { + compatible = "cortina,gemini-timer"; + reg = <0x43000000 0x1000>; + interrupts = <14 IRQ_TYPE_EDGE_RISING>, /* Timer 1 */ + <15 IRQ_TYPE_EDGE_RISING>, /* Timer 2 */ + <16 IRQ_TYPE_EDGE_RISING>; /* Timer 3 */ + syscon = <&syscon>; +}; diff --git a/Documentation/devicetree/bindings/timer/renesas,ostm.txt b/Documentation/devicetree/bindings/timer/renesas,ostm.txt new file mode 100644 index 000000000000..be3ae0fdf775 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/renesas,ostm.txt @@ -0,0 +1,30 @@ +* Renesas OS Timer (OSTM) + +The OSTM is a multi-channel 32-bit timer/counter with fixed clock +source that can operate in either interval count down timer or free-running +compare match mode. + +Channels are independent from each other. + +Required Properties: + + - compatible: must be one or more of the following: + - "renesas,r7s72100-ostm" for the r7s72100 OSTM + - "renesas,ostm" for any OSTM + This is a fallback for the above renesas,*-ostm entries + + - reg: base address and length of the register block for a timer channel. + + - interrupts: interrupt specifier for the timer channel. + + - clocks: clock specifier for the timer channel. + +Example: R7S72100 (RZ/A1H) OSTM node + + ostm0: timer@fcfec000 { + compatible = "renesas,r7s72100-ostm", "renesas,ostm"; + reg = <0xfcfec000 0x30>; + interrupts = <GIC_SPI 102 IRQ_TYPE_EDGE_RISING>; + clocks = <&mstp5_clks R7S72100_CLK_OSTM0>; + power-domains = <&cpg_clocks>; + }; diff --git a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt index b6b5130e5f65..1f69ee1a61ea 100644 --- a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt +++ b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt @@ -29,7 +29,6 @@ Optional properties: - vdda-pll-max-microamp : specifies max. load that can be drawn from pll supply - vddp-ref-clk-supply : phandle to UFS device ref_clk pad power supply - vddp-ref-clk-max-microamp : specifies max. load that can be drawn from this supply -- vddp-ref-clk-always-on : specifies if this supply needs to be kept always on Example: diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt index 862cd7c79805..d9b42da016f3 100644 --- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt +++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt @@ -2,8 +2,8 @@ Allwinner sun4i A10 musb DRC/OTG controller ------------------------------------------- Required properties: - - compatible : "allwinner,sun4i-a10-musb", "allwinner,sun6i-a31-musb" - or "allwinner,sun8i-a33-musb" + - compatible : "allwinner,sun4i-a10-musb", "allwinner,sun6i-a31-musb", + "allwinner,sun8i-a33-musb" or "allwinner,sun8i-h3-musb" - reg : mmio address range of the musb controller - clocks : clock specifier for the musb controller ahb gate clock - reset : reset specifier for the ahb reset (A31 and newer only) diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt index 01c71b1258f4..50dee3b44665 100644 --- a/Documentation/devicetree/bindings/usb/dwc3-st.txt +++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt @@ -20,10 +20,10 @@ See: Documentation/devicetree/bindings/reset/reset.txt with 'reg' property - pinctl-names : A pinctrl state named "default" must be defined -See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt +See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - pinctrl-0 : Pin control group -See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt +See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - ranges : allows valid 1:1 translation between child's address space and parent's address space diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index e3e6983288e3..f658f394c2d3 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -56,6 +56,10 @@ Optional properties: - <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated. + - in addition all properties from usb-xhci.txt from the current directory are + supported as well + + This is usually a subnode to DWC3 glue to which it is connected. dwc3@4a030000 { diff --git a/Documentation/devicetree/bindings/usb/ehci-omap.txt b/Documentation/devicetree/bindings/usb/ehci-omap.txt index 3dc231c832b0..d77e11a975a2 100644 --- a/Documentation/devicetree/bindings/usb/ehci-omap.txt +++ b/Documentation/devicetree/bindings/usb/ehci-omap.txt @@ -29,4 +29,3 @@ usbhsehci: ehci@4a064c00 { &usbhsehci { phys = <&hsusb1_phy 0 &hsusb3_phy>; }; - diff --git a/Documentation/devicetree/bindings/usb/ehci-st.txt b/Documentation/devicetree/bindings/usb/ehci-st.txt index fb45fa5770bb..410d922cfdd7 100644 --- a/Documentation/devicetree/bindings/usb/ehci-st.txt +++ b/Documentation/devicetree/bindings/usb/ehci-st.txt @@ -7,7 +7,7 @@ Required properties: - interrupts : one EHCI interrupt should be described here - pinctrl-names : a pinctrl state named "default" must be defined - pinctrl-0 : phandle referencing pin configuration of the USB controller -See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt +See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - clocks : phandle list of usb clocks - clock-names : should be "ic" for interconnect clock and "clk48" See: Documentation/devicetree/bindings/clock/clock-bindings.txt diff --git a/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt b/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt index e049d199bf0d..1d7c3bc677f7 100644 --- a/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt +++ b/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt @@ -10,7 +10,7 @@ Required properties: - vusb33-supply : regulator of USB avdd3.3v - clocks : a list of phandle + clock-specifier pairs, one for each entry in clock-names - - clock-names : must contain "sys_ck" for clock of controller; + - clock-names : must contain "sys_ck" and "ref_ck" for clock of controller; "wakeup_deb_p0" and "wakeup_deb_p1" are optional, they are depends on "mediatek,enable-wakeup" - phys : a list of phandle + phy specifier pairs @@ -30,7 +30,7 @@ Optional properties: "id_float" and "id_ground" are optinal which depends on "mediatek,enable-manual-drd" - pinctrl-0 : pin control group - See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt + See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - maximum-speed : valid arguments are "super-speed", "high-speed" and "full-speed"; refer to usb/generic.txt @@ -56,10 +56,10 @@ ssusb: usb@11271000 { phys = <&phy_port0 PHY_TYPE_USB3>, <&phy_port1 PHY_TYPE_USB2>; power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; - clocks = <&topckgen CLK_TOP_USB30_SEL>, + clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>, <&pericfg CLK_PERI_USB0>, <&pericfg CLK_PERI_USB1>; - clock-names = "sys_ck", + clock-names = "sys_ck", "ref_ck", "wakeup_deb_p0", "wakeup_deb_p1"; vusb33-supply = <&mt6397_vusb_reg>; @@ -79,8 +79,8 @@ ssusb: usb@11271000 { reg-names = "mac"; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; - clocks = <&topckgen CLK_TOP_USB30_SEL>; - clock-names = "sys_ck"; + clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>; + clock-names = "sys_ck", "ref_ck"; vusb33-supply = <&mt6397_vusb_reg>; status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/usb/mt8173-xhci.txt b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt index 2a930bd52b94..0acfc8acbea1 100644 --- a/Documentation/devicetree/bindings/usb/mt8173-xhci.txt +++ b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt @@ -23,6 +23,7 @@ Required properties: entry in clock-names - clock-names : must contain "sys_ck": for clock of xHCI MAC + "ref_ck": for reference clock of xHCI MAC "wakeup_deb_p0": for USB wakeup debounce clock of port0 "wakeup_deb_p1": for USB wakeup debounce clock of port1 @@ -37,7 +38,7 @@ Optional properties: - usb3-lpm-capable : supports USB3.0 LPM - pinctrl-names : a pinctrl state named "default" must be defined - pinctrl-0 : pin control group - See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt + See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt Example: usb30: usb@11270000 { @@ -47,10 +48,10 @@ usb30: usb@11270000 { reg-names = "mac", "ippc"; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; - clocks = <&topckgen CLK_TOP_USB30_SEL>, + clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>, <&pericfg CLK_PERI_USB0>, <&pericfg CLK_PERI_USB1>; - clock-names = "sys_ck", + clock-names = "sys_ck", "ref_ck", "wakeup_deb_p0", "wakeup_deb_p1"; phys = <&phy_port0 PHY_TYPE_USB3>, @@ -67,7 +68,7 @@ usb30: usb@11270000 { In the case, xhci is added as subnode to mtu3. An example and the DT binding details of mtu3 can be found in: -Documentation/devicetree/bindings/usb/mtu3.txt +Documentation/devicetree/bindings/usb/mt8173-mtu3.txt Required properties: - compatible : should contain "mediatek,mt8173-xhci" @@ -82,6 +83,7 @@ Required properties: entry in clock-names - clock-names : must be "sys_ck": for clock of xHCI MAC + "ref_ck": for reference clock of xHCI MAC Optional properties: - vbus-supply : reference to the VBUS regulator; @@ -94,8 +96,8 @@ usb30: usb@11270000 { reg-names = "mac"; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; - clocks = <&topckgen CLK_TOP_USB30_SEL>; - clock-names = "sys_ck"; + clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>; + clock-names = "sys_ck", "ref_ck"; vusb33-supply = <&mt6397_vusb_reg>; usb3-lpm-capable; }; diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt index 39acb084bce9..73cc0963e823 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt @@ -18,7 +18,7 @@ A child node must exist to represent the core DWC3 IP block. The name of the node is not important. The content of the node is defined in dwc3.txt. Phy documentation is provided in the following places: -Documentation/devicetree/bindings/phy/qcom,dwc3-usb-phy.txt +Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt Example device nodes: diff --git a/Documentation/devicetree/bindings/usb/ulpi.txt b/Documentation/devicetree/bindings/usb/ulpi.txt new file mode 100644 index 000000000000..ca179dc4bd50 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ulpi.txt @@ -0,0 +1,20 @@ +ULPI bus binding +---------------- + +Phys that are behind a ULPI connection can be described with the following +binding. The host controller shall have a "ulpi" named node as a child, and +that node shall have one enabled node underneath it representing the ulpi +device on the bus. + +EXAMPLE +------- + +usb { + compatible = "vendor,usb-controller"; + + ulpi { + phy { + compatible = "vendor,phy"; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index 0b7d8576001c..2d80b60eeabe 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -27,6 +27,7 @@ Required properties: Optional properties: - clocks: reference to a clock - usb3-lpm-capable: determines if platform is USB3 LPM capable + - quirk-broken-port-ped: set if the controller has broken port disable mechanism Example: usb@f0931000 { diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt new file mode 100644 index 000000000000..0c065f77658f --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb251xb.txt @@ -0,0 +1,83 @@ +Microchip USB 2.0 Hi-Speed Hub Controller + +The device node for the configuration of a Microchip USB251xB/xBi USB 2.0 +Hi-Speed Controller. + +Required properties : + - compatible : Should be "microchip,usb251xb" or one of the specific types: + "microchip,usb2512b", "microchip,usb2512bi", "microchip,usb2513b", + "microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi" + - hub-reset-gpios : Should specify the gpio for hub reset + +Optional properties : + - reg : I2C address on the selected bus (default is <0x2C>) + - skip-config : Skip Hub configuration, but only send the USB-Attach command + - vendor-id : USB Vendor ID of the hub (16 bit, default is 0x0424) + - product-id : USB Product ID of the hub (16 bit, default depends on type) + - device-id : USB Device ID of the hub (16 bit, default is 0x0bb3) + - language-id : USB Language ID (16 bit, default is 0x0000) + - manufacturer : USB Manufacturer string (max 31 characters long) + - product : USB Product string (max 31 characters long) + - serial : USB Serial string (max 31 characters long) + - {bus,self}-powered : selects between self- and bus-powered operation (default + is self-powered) + - disable-hi-speed : disable USB Hi-Speed support + - {multi,single}-tt : selects between multi- and single-transaction-translator + (default is multi-tt) + - disable-eop : disable End of Packet generation in full-speed mode + - {ganged,individual}-sensing : select over-current sense type in self-powered + mode (default is individual) + - {ganged,individual}-port-switching : select port power switching mode + (default is individual) + - dynamic-power-switching : enable auto-switching from self- to bus-powered + operation if the local power source is removed or unavailable + - oc-delay-{100us,4ms,8ms,16ms} : set over current timer delay (default is 8ms) + - compound-device : indicated the hub is part of a compound device + - port-mapping-mode : enable port mapping mode + - string-support : enable string descriptor support (required for manufacturer, + product and serial string configuration) + - non-removable-ports : Should specify the ports which have a non-removable + device connected. + - sp-disabled-ports : Specifies the ports which will be self-power disabled + - bp-disabled-ports : Specifies the ports which will be bus-power disabled + - max-sp-power : Specifies the maximum current the hub consumes from an + upstream port when operating as self-powered hub including the power + consumption of a permanently attached peripheral if the hub is + configured as a compound device. The value is given in mA in a 0 - 500 + range (default is 2). + - max-bp-power : Specifies the maximum current the hub consumes from an + upstream port when operating as bus-powered hub including the power + consumption of a permanently attached peripheral if the hub is + configured as a compound device. The value is given in mA in a 0 - 500 + range (default is 100). + - max-sp-current : Specifies the maximum current the hub consumes from an + upstream port when operating as self-powered hub EXCLUDING the power + consumption of a permanently attached peripheral if the hub is + configured as a compound device. The value is given in mA in a 0 - 500 + range (default is 2). + - max-bp-current : Specifies the maximum current the hub consumes from an + upstream port when operating as bus-powered hub EXCLUDING the power + consumption of a permanently attached peripheral if the hub is + configured as a compound device. The value is given in mA in a 0 - 500 + range (default is 100). + - power-on-time : Specifies the time it takes from the time the host initiates + the power-on sequence to a port until the port has adequate power. The + value is given in ms in a 0 - 510 range (default is 100ms). + +Examples: + usb2512b@2c { + compatible = "microchip,usb2512b"; + hub-reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + }; + + usb2514b@2c { + compatible = "microchip,usb2514b"; + reg = <0x2c>; + reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + vendor-id = /bits/ 16 <0x0000>; + product-id = /bits/ 16 <0x0000>; + string-support; + manufacturer = "Foo"; + product = "Foo-Bar"; + serial = "1234567890A"; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 16d3b5e7f5d1..ec0bfb9bbebd 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -40,6 +40,7 @@ atmel Atmel Corporation auo AU Optronics Corporation auvidea Auvidea GmbH avago Avago Technologies +avia avia semiconductor avic Shanghai AVIC Optoelectronics Co., Ltd. axentia Axentia Technologies AB axis Axis Communications AB @@ -75,6 +76,7 @@ dallas Maxim Integrated Products (formerly Dallas Semiconductor) davicom DAVICOM Semiconductor, Inc. delta Delta Electronics, Inc. denx Denx Software Engineering +devantech Devantech, Ltd. digi Digi International Inc. digilent Diglent, Inc. dlg Dialog Semiconductor @@ -102,11 +104,13 @@ everest Everest Semiconductor Co. Ltd. everspin Everspin Technologies, Inc. excito Excito ezchip EZchip Semiconductor +faraday Faraday Technology Corporation fcs Fairchild Semiconductor firefly Firefly focaltech FocalTech Systems Co.,Ltd friendlyarm Guangzhou FriendlyARM Computer Tech Co., Ltd fsl Freescale Semiconductor +fujitsu Fujitsu Ltd. ge General Electric Company geekbuying GeekBuying gef GE Fanuc Intelligent Platforms Embedded Systems, Inc. @@ -118,6 +122,7 @@ gmt Global Mixed-mode Technology, Inc. goodix Shenzhen Huiding Technology Co., Ltd. google Google, Inc. grinn Grinn +grmn Garmin Limited gumstix Gumstix, Inc. gw Gateworks Corporation hannstar HannStar Display Corporation @@ -159,11 +164,14 @@ kosagi Sutajio Ko-Usagi PTE Ltd. kyo Kyocera Corporation lacie LaCie lantiq Lantiq Semiconductor +lego LEGO Systems A/S lenovo Lenovo Group Ltd. lg LG Corporation +licheepi Lichee Pi linux Linux-specific binding lltc Linear Technology Corporation lsi LSI Corp. (LSI Logic) +lwn Liebherr-Werk Nenzing GmbH macnica Macnica Americas marvell Marvell Technology Group Ltd. maxim Maxim Integrated Products @@ -187,6 +195,7 @@ mpl MPL AG mqmaker mqmaker Inc. msi Micro-Star International Co. Ltd. mti Imagination Technologies Ltd. (formerly MIPS Technologies Inc.) +multi-inno Multi-Inno Technology Co.,Ltd mundoreader Mundo Reader S.L. murata Murata Manufacturing Co., Ltd. mxicy Macronix International Co., Ltd. @@ -196,6 +205,7 @@ nec NEC LCD Technologies, Ltd. neonode Neonode Inc. netgear NETGEAR netlogic Broadcom Corporation (formerly NetLogic Microsystems) +netron-dy Netron DY netxeon Shenzhen Netxeon Technology CO., LTD nexbox Nexbox newhaven Newhaven Display International @@ -227,6 +237,7 @@ pine64 Pine64 pixcir PIXCIR MICROELECTRONICS Co., Ltd plathome Plat'Home Co., Ltd. plda PLDA +poslab Poslab Technology Co., Ltd. powervr PowerVR (deprecated, use img) pulsedlight PulsedLight, Inc qca Qualcomm Atheros, Inc. @@ -296,6 +307,7 @@ technologic Technologic Systems terasic Terasic Inc. thine THine Electronics, Inc. ti Texas Instruments +tianma Tianma Micro-electronics Co., Ltd. tlm Trusted Logic Mobility topeet Topeet toradex Toradex AG @@ -320,6 +332,7 @@ virtio Virtual I/O Device Specification, developed by the OASIS consortium vivante Vivante Corporation voipac Voipac Technologies s.r.o. wd Western Digital Corp. +wetek WeTek Electronics, limited. wexler Wexler winbond Winbond Electronics corp. wlf Wolfson Microelectronics @@ -328,7 +341,9 @@ x-powers X-Powers xes Extreme Engineering Solutions (X-ES) xillybus Xillybus Ltd. xlnx Xilinx +xunlong Shenzhen Xunlong Software CO.,Limited zarlink Zarlink Semiconductor +zeitec ZEITEC Semiconductor Co., LTD. zii Zodiac Inflight Innovations zte ZTE Corp. zyxel ZyXEL Communications Corp. diff --git a/Documentation/devicetree/bindings/watchdog/cortina,gemin-watchdog.txt b/Documentation/devicetree/bindings/watchdog/cortina,gemin-watchdog.txt new file mode 100644 index 000000000000..bc4b865d178b --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/cortina,gemin-watchdog.txt @@ -0,0 +1,17 @@ +Cortina Systems Gemini SoC Watchdog + +Required properties: +- compatible : must be "cortina,gemini-watchdog" +- reg : shall contain base register location and length +- interrupts : shall contain the interrupt for the watchdog + +Optional properties: +- timeout-sec : the default watchdog timeout in seconds. + +Example: + +watchdog@41000000 { + compatible = "cortina,gemini-watchdog"; + reg = <0x41000000 0x1000>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt index 8f3d96af81d7..1f6e101e299a 100644 --- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt @@ -6,10 +6,11 @@ occurred. Required properties: - compatible : should be one among the following - (a) "samsung,s3c2410-wdt" for Exynos4 and previous SoCs - (b) "samsung,exynos5250-wdt" for Exynos5250 - (c) "samsung,exynos5420-wdt" for Exynos5420 - (c) "samsung,exynos7-wdt" for Exynos7 + - "samsung,s3c2410-wdt" for S3C2410 + - "samsung,s3c6410-wdt" for S3C6410, S5PV210 and Exynos4 + - "samsung,exynos5250-wdt" for Exynos5250 + - "samsung,exynos5420-wdt" for Exynos5420 + - "samsung,exynos7-wdt" for Exynos7 - reg : base physical address of the controller and length of memory mapped region. diff --git a/Documentation/devicetree/bindings/watchdog/zte,zx2967-wdt.txt b/Documentation/devicetree/bindings/watchdog/zte,zx2967-wdt.txt new file mode 100644 index 000000000000..06ce67766756 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/zte,zx2967-wdt.txt @@ -0,0 +1,32 @@ +ZTE zx2967 Watchdog timer + +Required properties: + +- compatible : should be one of the following. + * zte,zx296718-wdt +- reg : Specifies base physical address and size of the registers. +- clocks : Pairs of phandle and specifier referencing the controller's clocks. +- resets : Reference to the reset controller controlling the watchdog + controller. + +Optional properties: + +- timeout-sec : Contains the watchdog timeout in seconds. +- zte,wdt-reset-sysctrl : Directs how to reset system by the watchdog. + if we don't want to restart system when watchdog been triggered, + it's not required, vice versa. + It should include following fields. + * phandle of aon-sysctrl. + * offset of register that be written, should be 0xb0. + * configure value that be written to aon-sysctrl. + * bit mask, corresponding bits will be affected. + +Example: + +wdt: watchdog@1465000 { + compatible = "zte,zx296718-wdt"; + reg = <0x1465000 0x1000>; + clocks = <&topcrm WDT_WCLK>; + resets = <&toprst 35>; + zte,wdt-reset-sysctrl = <&aon_sysctrl 0xb0 1 0x115>; +}; diff --git a/Documentation/dma-buf-sharing.txt b/Documentation/dma-buf-sharing.txt deleted file mode 100644 index ca44c5820585..000000000000 --- a/Documentation/dma-buf-sharing.txt +++ /dev/null @@ -1,482 +0,0 @@ - DMA Buffer Sharing API Guide - ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - - Sumit Semwal - <sumit dot semwal at linaro dot org> - <sumit dot semwal at ti dot com> - -This document serves as a guide to device-driver writers on what is the dma-buf -buffer sharing API, how to use it for exporting and using shared buffers. - -Any device driver which wishes to be a part of DMA buffer sharing, can do so as -either the 'exporter' of buffers, or the 'user' of buffers. - -Say a driver A wants to use buffers created by driver B, then we call B as the -exporter, and A as buffer-user. - -The exporter -- implements and manages operations[1] for the buffer -- allows other users to share the buffer by using dma_buf sharing APIs, -- manages the details of buffer allocation, -- decides about the actual backing storage where this allocation happens, -- takes care of any migration of scatterlist - for all (shared) users of this - buffer, - -The buffer-user -- is one of (many) sharing users of the buffer. -- doesn't need to worry about how the buffer is allocated, or where. -- needs a mechanism to get access to the scatterlist that makes up this buffer - in memory, mapped into its own address space, so it can access the same area - of memory. - -dma-buf operations for device dma only --------------------------------------- - -The dma_buf buffer sharing API usage contains the following steps: - -1. Exporter announces that it wishes to export a buffer -2. Userspace gets the file descriptor associated with the exported buffer, and - passes it around to potential buffer-users based on use case -3. Each buffer-user 'connects' itself to the buffer -4. When needed, buffer-user requests access to the buffer from exporter -5. When finished with its use, the buffer-user notifies end-of-DMA to exporter -6. when buffer-user is done using this buffer completely, it 'disconnects' - itself from the buffer. - - -1. Exporter's announcement of buffer export - - The buffer exporter announces its wish to export a buffer. In this, it - connects its own private buffer data, provides implementation for operations - that can be performed on the exported dma_buf, and flags for the file - associated with this buffer. All these fields are filled in struct - dma_buf_export_info, defined via the DEFINE_DMA_BUF_EXPORT_INFO macro. - - Interface: - DEFINE_DMA_BUF_EXPORT_INFO(exp_info) - struct dma_buf *dma_buf_export(struct dma_buf_export_info *exp_info) - - If this succeeds, dma_buf_export allocates a dma_buf structure, and - returns a pointer to the same. It also associates an anonymous file with this - buffer, so it can be exported. On failure to allocate the dma_buf object, - it returns NULL. - - 'exp_name' in struct dma_buf_export_info is the name of exporter - to - facilitate information while debugging. It is set to KBUILD_MODNAME by - default, so exporters don't have to provide a specific name, if they don't - wish to. - - DEFINE_DMA_BUF_EXPORT_INFO macro defines the struct dma_buf_export_info, - zeroes it out and pre-populates exp_name in it. - - -2. Userspace gets a handle to pass around to potential buffer-users - - Userspace entity requests for a file-descriptor (fd) which is a handle to the - anonymous file associated with the buffer. It can then share the fd with other - drivers and/or processes. - - Interface: - int dma_buf_fd(struct dma_buf *dmabuf, int flags) - - This API installs an fd for the anonymous file associated with this buffer; - returns either 'fd', or error. - -3. Each buffer-user 'connects' itself to the buffer - - Each buffer-user now gets a reference to the buffer, using the fd passed to - it. - - Interface: - struct dma_buf *dma_buf_get(int fd) - - This API will return a reference to the dma_buf, and increment refcount for - it. - - After this, the buffer-user needs to attach its device with the buffer, which - helps the exporter to know of device buffer constraints. - - Interface: - struct dma_buf_attachment *dma_buf_attach(struct dma_buf *dmabuf, - struct device *dev) - - This API returns reference to an attachment structure, which is then used - for scatterlist operations. It will optionally call the 'attach' dma_buf - operation, if provided by the exporter. - - The dma-buf sharing framework does the bookkeeping bits related to managing - the list of all attachments to a buffer. - -Until this stage, the buffer-exporter has the option to choose not to actually -allocate the backing storage for this buffer, but wait for the first buffer-user -to request use of buffer for allocation. - - -4. When needed, buffer-user requests access to the buffer - - Whenever a buffer-user wants to use the buffer for any DMA, it asks for - access to the buffer using dma_buf_map_attachment API. At least one attach to - the buffer must have happened before map_dma_buf can be called. - - Interface: - struct sg_table * dma_buf_map_attachment(struct dma_buf_attachment *, - enum dma_data_direction); - - This is a wrapper to dma_buf->ops->map_dma_buf operation, which hides the - "dma_buf->ops->" indirection from the users of this interface. - - In struct dma_buf_ops, map_dma_buf is defined as - struct sg_table * (*map_dma_buf)(struct dma_buf_attachment *, - enum dma_data_direction); - - It is one of the buffer operations that must be implemented by the exporter. - It should return the sg_table containing scatterlist for this buffer, mapped - into caller's address space. - - If this is being called for the first time, the exporter can now choose to - scan through the list of attachments for this buffer, collate the requirements - of the attached devices, and choose an appropriate backing storage for the - buffer. - - Based on enum dma_data_direction, it might be possible to have multiple users - accessing at the same time (for reading, maybe), or any other kind of sharing - that the exporter might wish to make available to buffer-users. - - map_dma_buf() operation can return -EINTR if it is interrupted by a signal. - - -5. When finished, the buffer-user notifies end-of-DMA to exporter - - Once the DMA for the current buffer-user is over, it signals 'end-of-DMA' to - the exporter using the dma_buf_unmap_attachment API. - - Interface: - void dma_buf_unmap_attachment(struct dma_buf_attachment *, - struct sg_table *); - - This is a wrapper to dma_buf->ops->unmap_dma_buf() operation, which hides the - "dma_buf->ops->" indirection from the users of this interface. - - In struct dma_buf_ops, unmap_dma_buf is defined as - void (*unmap_dma_buf)(struct dma_buf_attachment *, - struct sg_table *, - enum dma_data_direction); - - unmap_dma_buf signifies the end-of-DMA for the attachment provided. Like - map_dma_buf, this API also must be implemented by the exporter. - - -6. when buffer-user is done using this buffer, it 'disconnects' itself from the - buffer. - - After the buffer-user has no more interest in using this buffer, it should - disconnect itself from the buffer: - - - it first detaches itself from the buffer. - - Interface: - void dma_buf_detach(struct dma_buf *dmabuf, - struct dma_buf_attachment *dmabuf_attach); - - This API removes the attachment from the list in dmabuf, and optionally calls - dma_buf->ops->detach(), if provided by exporter, for any housekeeping bits. - - - Then, the buffer-user returns the buffer reference to exporter. - - Interface: - void dma_buf_put(struct dma_buf *dmabuf); - - This API then reduces the refcount for this buffer. - - If, as a result of this call, the refcount becomes 0, the 'release' file - operation related to this fd is called. It calls the dmabuf->ops->release() - operation in turn, and frees the memory allocated for dmabuf when exported. - -NOTES: -- Importance of attach-detach and {map,unmap}_dma_buf operation pairs - The attach-detach calls allow the exporter to figure out backing-storage - constraints for the currently-interested devices. This allows preferential - allocation, and/or migration of pages across different types of storage - available, if possible. - - Bracketing of DMA access with {map,unmap}_dma_buf operations is essential - to allow just-in-time backing of storage, and migration mid-way through a - use-case. - -- Migration of backing storage if needed - If after - - at least one map_dma_buf has happened, - - and the backing storage has been allocated for this buffer, - another new buffer-user intends to attach itself to this buffer, it might - be allowed, if possible for the exporter. - - In case it is allowed by the exporter: - if the new buffer-user has stricter 'backing-storage constraints', and the - exporter can handle these constraints, the exporter can just stall on the - map_dma_buf until all outstanding access is completed (as signalled by - unmap_dma_buf). - Once all users have finished accessing and have unmapped this buffer, the - exporter could potentially move the buffer to the stricter backing-storage, - and then allow further {map,unmap}_dma_buf operations from any buffer-user - from the migrated backing-storage. - - If the exporter cannot fulfill the backing-storage constraints of the new - buffer-user device as requested, dma_buf_attach() would return an error to - denote non-compatibility of the new buffer-sharing request with the current - buffer. - - If the exporter chooses not to allow an attach() operation once a - map_dma_buf() API has been called, it simply returns an error. - -Kernel cpu access to a dma-buf buffer object --------------------------------------------- - -The motivation to allow cpu access from the kernel to a dma-buf object from the -importers side are: -- fallback operations, e.g. if the devices is connected to a usb bus and the - kernel needs to shuffle the data around first before sending it away. -- full transparency for existing users on the importer side, i.e. userspace - should not notice the difference between a normal object from that subsystem - and an imported one backed by a dma-buf. This is really important for drm - opengl drivers that expect to still use all the existing upload/download - paths. - -Access to a dma_buf from the kernel context involves three steps: - -1. Prepare access, which invalidate any necessary caches and make the object - available for cpu access. -2. Access the object page-by-page with the dma_buf map apis -3. Finish access, which will flush any necessary cpu caches and free reserved - resources. - -1. Prepare access - - Before an importer can access a dma_buf object with the cpu from the kernel - context, it needs to notify the exporter of the access that is about to - happen. - - Interface: - int dma_buf_begin_cpu_access(struct dma_buf *dmabuf, - enum dma_data_direction direction) - - This allows the exporter to ensure that the memory is actually available for - cpu access - the exporter might need to allocate or swap-in and pin the - backing storage. The exporter also needs to ensure that cpu access is - coherent for the access direction. The direction can be used by the exporter - to optimize the cache flushing, i.e. access with a different direction (read - instead of write) might return stale or even bogus data (e.g. when the - exporter needs to copy the data to temporary storage). - - This step might fail, e.g. in oom conditions. - -2. Accessing the buffer - - To support dma_buf objects residing in highmem cpu access is page-based using - an api similar to kmap. Accessing a dma_buf is done in aligned chunks of - PAGE_SIZE size. Before accessing a chunk it needs to be mapped, which returns - a pointer in kernel virtual address space. Afterwards the chunk needs to be - unmapped again. There is no limit on how often a given chunk can be mapped - and unmapped, i.e. the importer does not need to call begin_cpu_access again - before mapping the same chunk again. - - Interfaces: - void *dma_buf_kmap(struct dma_buf *, unsigned long); - void dma_buf_kunmap(struct dma_buf *, unsigned long, void *); - - There are also atomic variants of these interfaces. Like for kmap they - facilitate non-blocking fast-paths. Neither the importer nor the exporter (in - the callback) is allowed to block when using these. - - Interfaces: - void *dma_buf_kmap_atomic(struct dma_buf *, unsigned long); - void dma_buf_kunmap_atomic(struct dma_buf *, unsigned long, void *); - - For importers all the restrictions of using kmap apply, like the limited - supply of kmap_atomic slots. Hence an importer shall only hold onto at most 2 - atomic dma_buf kmaps at the same time (in any given process context). - - dma_buf kmap calls outside of the range specified in begin_cpu_access are - undefined. If the range is not PAGE_SIZE aligned, kmap needs to succeed on - the partial chunks at the beginning and end but may return stale or bogus - data outside of the range (in these partial chunks). - - Note that these calls need to always succeed. The exporter needs to complete - any preparations that might fail in begin_cpu_access. - - For some cases the overhead of kmap can be too high, a vmap interface - is introduced. This interface should be used very carefully, as vmalloc - space is a limited resources on many architectures. - - Interfaces: - void *dma_buf_vmap(struct dma_buf *dmabuf) - void dma_buf_vunmap(struct dma_buf *dmabuf, void *vaddr) - - The vmap call can fail if there is no vmap support in the exporter, or if it - runs out of vmalloc space. Fallback to kmap should be implemented. Note that - the dma-buf layer keeps a reference count for all vmap access and calls down - into the exporter's vmap function only when no vmapping exists, and only - unmaps it once. Protection against concurrent vmap/vunmap calls is provided - by taking the dma_buf->lock mutex. - -3. Finish access - - When the importer is done accessing the CPU, it needs to announce this to - the exporter (to facilitate cache flushing and unpinning of any pinned - resources). The result of any dma_buf kmap calls after end_cpu_access is - undefined. - - Interface: - void dma_buf_end_cpu_access(struct dma_buf *dma_buf, - enum dma_data_direction dir); - - -Direct Userspace Access/mmap Support ------------------------------------- - -Being able to mmap an export dma-buf buffer object has 2 main use-cases: -- CPU fallback processing in a pipeline and -- supporting existing mmap interfaces in importers. - -1. CPU fallback processing in a pipeline - - In many processing pipelines it is sometimes required that the cpu can access - the data in a dma-buf (e.g. for thumbnail creation, snapshots, ...). To avoid - the need to handle this specially in userspace frameworks for buffer sharing - it's ideal if the dma_buf fd itself can be used to access the backing storage - from userspace using mmap. - - Furthermore Android's ION framework already supports this (and is otherwise - rather similar to dma-buf from a userspace consumer side with using fds as - handles, too). So it's beneficial to support this in a similar fashion on - dma-buf to have a good transition path for existing Android userspace. - - No special interfaces, userspace simply calls mmap on the dma-buf fd, making - sure that the cache synchronization ioctl (DMA_BUF_IOCTL_SYNC) is *always* - used when the access happens. Note that DMA_BUF_IOCTL_SYNC can fail with - -EAGAIN or -EINTR, in which case it must be restarted. - - Some systems might need some sort of cache coherency management e.g. when - CPU and GPU domains are being accessed through dma-buf at the same time. To - circumvent this problem there are begin/end coherency markers, that forward - directly to existing dma-buf device drivers vfunc hooks. Userspace can make - use of those markers through the DMA_BUF_IOCTL_SYNC ioctl. The sequence - would be used like following: - - mmap dma-buf fd - - for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2. read/write - to mmap area 3. SYNC_END ioctl. This can be repeated as often as you - want (with the new data being consumed by the GPU or say scanout device) - - munmap once you don't need the buffer any more - - For correctness and optimal performance, it is always required to use - SYNC_START and SYNC_END before and after, respectively, when accessing the - mapped address. Userspace cannot rely on coherent access, even when there - are systems where it just works without calling these ioctls. - -2. Supporting existing mmap interfaces in importers - - Similar to the motivation for kernel cpu access it is again important that - the userspace code of a given importing subsystem can use the same interfaces - with a imported dma-buf buffer object as with a native buffer object. This is - especially important for drm where the userspace part of contemporary OpenGL, - X, and other drivers is huge, and reworking them to use a different way to - mmap a buffer rather invasive. - - The assumption in the current dma-buf interfaces is that redirecting the - initial mmap is all that's needed. A survey of some of the existing - subsystems shows that no driver seems to do any nefarious thing like syncing - up with outstanding asynchronous processing on the device or allocating - special resources at fault time. So hopefully this is good enough, since - adding interfaces to intercept pagefaults and allow pte shootdowns would - increase the complexity quite a bit. - - Interface: - int dma_buf_mmap(struct dma_buf *, struct vm_area_struct *, - unsigned long); - - If the importing subsystem simply provides a special-purpose mmap call to set - up a mapping in userspace, calling do_mmap with dma_buf->file will equally - achieve that for a dma-buf object. - -3. Implementation notes for exporters - - Because dma-buf buffers have invariant size over their lifetime, the dma-buf - core checks whether a vma is too large and rejects such mappings. The - exporter hence does not need to duplicate this check. - - Because existing importing subsystems might presume coherent mappings for - userspace, the exporter needs to set up a coherent mapping. If that's not - possible, it needs to fake coherency by manually shooting down ptes when - leaving the cpu domain and flushing caches at fault time. Note that all the - dma_buf files share the same anon inode, hence the exporter needs to replace - the dma_buf file stored in vma->vm_file with it's own if pte shootdown is - required. This is because the kernel uses the underlying inode's address_space - for vma tracking (and hence pte tracking at shootdown time with - unmap_mapping_range). - - If the above shootdown dance turns out to be too expensive in certain - scenarios, we can extend dma-buf with a more explicit cache tracking scheme - for userspace mappings. But the current assumption is that using mmap is - always a slower path, so some inefficiencies should be acceptable. - - Exporters that shoot down mappings (for any reasons) shall not do any - synchronization at fault time with outstanding device operations. - Synchronization is an orthogonal issue to sharing the backing storage of a - buffer and hence should not be handled by dma-buf itself. This is explicitly - mentioned here because many people seem to want something like this, but if - different exporters handle this differently, buffer sharing can fail in - interesting ways depending upong the exporter (if userspace starts depending - upon this implicit synchronization). - -Other Interfaces Exposed to Userspace on the dma-buf FD ------------------------------------------------------- - -- Since kernel 3.12 the dma-buf FD supports the llseek system call, but only - with offset=0 and whence=SEEK_END|SEEK_SET. SEEK_SET is supported to allow - the usual size discover pattern size = SEEK_END(0); SEEK_SET(0). Every other - llseek operation will report -EINVAL. - - If llseek on dma-buf FDs isn't support the kernel will report -ESPIPE for all - cases. Userspace can use this to detect support for discovering the dma-buf - size using llseek. - -Miscellaneous notes -------------------- - -- Any exporters or users of the dma-buf buffer sharing framework must have - a 'select DMA_SHARED_BUFFER' in their respective Kconfigs. - -- In order to avoid fd leaks on exec, the FD_CLOEXEC flag must be set - on the file descriptor. This is not just a resource leak, but a - potential security hole. It could give the newly exec'd application - access to buffers, via the leaked fd, to which it should otherwise - not be permitted access. - - The problem with doing this via a separate fcntl() call, versus doing it - atomically when the fd is created, is that this is inherently racy in a - multi-threaded app[3]. The issue is made worse when it is library code - opening/creating the file descriptor, as the application may not even be - aware of the fd's. - - To avoid this problem, userspace must have a way to request O_CLOEXEC - flag be set when the dma-buf fd is created. So any API provided by - the exporting driver to create a dmabuf fd must provide a way to let - userspace control setting of O_CLOEXEC flag passed in to dma_buf_fd(). - -- If an exporter needs to manually flush caches and hence needs to fake - coherency for mmap support, it needs to be able to zap all the ptes pointing - at the backing storage. Now linux mm needs a struct address_space associated - with the struct file stored in vma->vm_file to do that with the function - unmap_mapping_range. But the dma_buf framework only backs every dma_buf fd - with the anon_file struct file, i.e. all dma_bufs share the same file. - - Hence exporters need to setup their own file (and address_space) association - by setting vma->vm_file and adjusting vma->vm_pgoff in the dma_buf mmap - callback. In the specific case of a gem driver the exporter could use the - shmem file already provided by gem (and set vm_pgoff = 0). Exporters can then - zap ptes by unmapping the corresponding range of the struct address_space - associated with their own file. - -References: -[1] struct dma_buf_ops in include/linux/dma-buf.h -[2] All interfaces mentioned above defined in include/linux/dma-buf.h -[3] https://lwn.net/Articles/236486/ diff --git a/Documentation/driver-api/80211/cfg80211.rst b/Documentation/driver-api/80211/cfg80211.rst index b1e149ea6fee..eca534ab6172 100644 --- a/Documentation/driver-api/80211/cfg80211.rst +++ b/Documentation/driver-api/80211/cfg80211.rst @@ -45,6 +45,9 @@ Device registration :functions: wiphy_new .. kernel-doc:: include/net/cfg80211.h + :functions: wiphy_read_of_freq_limits + +.. kernel-doc:: include/net/cfg80211.h :functions: wiphy_register .. kernel-doc:: include/net/cfg80211.h diff --git a/Documentation/driver-api/dma-buf.rst b/Documentation/driver-api/dma-buf.rst index a9b457a4b949..31671b469627 100644 --- a/Documentation/driver-api/dma-buf.rst +++ b/Documentation/driver-api/dma-buf.rst @@ -17,6 +17,98 @@ shared or exclusive fence(s) associated with the buffer. Shared DMA Buffers ------------------ +This document serves as a guide to device-driver writers on what is the dma-buf +buffer sharing API, how to use it for exporting and using shared buffers. + +Any device driver which wishes to be a part of DMA buffer sharing, can do so as +either the 'exporter' of buffers, or the 'user' or 'importer' of buffers. + +Say a driver A wants to use buffers created by driver B, then we call B as the +exporter, and A as buffer-user/importer. + +The exporter + + - implements and manages operations in :c:type:`struct dma_buf_ops + <dma_buf_ops>` for the buffer, + - allows other users to share the buffer by using dma_buf sharing APIs, + - manages the details of buffer allocation, wrapped int a :c:type:`struct + dma_buf <dma_buf>`, + - decides about the actual backing storage where this allocation happens, + - and takes care of any migration of scatterlist - for all (shared) users of + this buffer. + +The buffer-user + + - is one of (many) sharing users of the buffer. + - doesn't need to worry about how the buffer is allocated, or where. + - and needs a mechanism to get access to the scatterlist that makes up this + buffer in memory, mapped into its own address space, so it can access the + same area of memory. This interface is provided by :c:type:`struct + dma_buf_attachment <dma_buf_attachment>`. + +Any exporters or users of the dma-buf buffer sharing framework must have a +'select DMA_SHARED_BUFFER' in their respective Kconfigs. + +Userspace Interface Notes +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Mostly a DMA buffer file descriptor is simply an opaque object for userspace, +and hence the generic interface exposed is very minimal. There's a few things to +consider though: + +- Since kernel 3.12 the dma-buf FD supports the llseek system call, but only + with offset=0 and whence=SEEK_END|SEEK_SET. SEEK_SET is supported to allow + the usual size discover pattern size = SEEK_END(0); SEEK_SET(0). Every other + llseek operation will report -EINVAL. + + If llseek on dma-buf FDs isn't support the kernel will report -ESPIPE for all + cases. Userspace can use this to detect support for discovering the dma-buf + size using llseek. + +- In order to avoid fd leaks on exec, the FD_CLOEXEC flag must be set + on the file descriptor. This is not just a resource leak, but a + potential security hole. It could give the newly exec'd application + access to buffers, via the leaked fd, to which it should otherwise + not be permitted access. + + The problem with doing this via a separate fcntl() call, versus doing it + atomically when the fd is created, is that this is inherently racy in a + multi-threaded app[3]. The issue is made worse when it is library code + opening/creating the file descriptor, as the application may not even be + aware of the fd's. + + To avoid this problem, userspace must have a way to request O_CLOEXEC + flag be set when the dma-buf fd is created. So any API provided by + the exporting driver to create a dmabuf fd must provide a way to let + userspace control setting of O_CLOEXEC flag passed in to dma_buf_fd(). + +- Memory mapping the contents of the DMA buffer is also supported. See the + discussion below on `CPU Access to DMA Buffer Objects`_ for the full details. + +- The DMA buffer FD is also pollable, see `Fence Poll Support`_ below for + details. + +Basic Operation and Device DMA Access +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. kernel-doc:: drivers/dma-buf/dma-buf.c + :doc: dma buf device access + +CPU Access to DMA Buffer Objects +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. kernel-doc:: drivers/dma-buf/dma-buf.c + :doc: cpu access + +Fence Poll Support +~~~~~~~~~~~~~~~~~~ + +.. kernel-doc:: drivers/dma-buf/dma-buf.c + :doc: fence polling + +Kernel Functions and Structures Reference +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + .. kernel-doc:: drivers/dma-buf/dma-buf.c :export: diff --git a/Documentation/driver-api/firmware/built-in-fw.rst b/Documentation/driver-api/firmware/built-in-fw.rst new file mode 100644 index 000000000000..7300e66857f8 --- /dev/null +++ b/Documentation/driver-api/firmware/built-in-fw.rst @@ -0,0 +1,38 @@ +================= +Built-in firmware +================= + +Firmware can be built-in to the kernel, this means building the firmware +into vmlinux directly, to enable avoiding having to look for firmware from +the filesystem. Instead, firmware can be looked for inside the kernel +directly. You can enable built-in firmware using the kernel configuration +options: + + * CONFIG_EXTRA_FIRMWARE + * CONFIG_EXTRA_FIRMWARE_DIR + +This should not be confused with CONFIG_FIRMWARE_IN_KERNEL, this is for drivers +which enables firmware to be built as part of the kernel build process. This +option, CONFIG_FIRMWARE_IN_KERNEL, will build all firmware for all drivers +enabled which ship its firmware inside the Linux kernel source tree. + +There are a few reasons why you might want to consider building your firmware +into the kernel with CONFIG_EXTRA_FIRMWARE though: + +* Speed +* Firmware is needed for accessing the boot device, and the user doesn't + want to stuff the firmware into the boot initramfs. + +Even if you have these needs there are a few reasons why you may not be +able to make use of built-in firmware: + +* Legalese - firmware is non-GPL compatible +* Some firmware may be optional +* Firmware upgrades are possible, therefore a new firmware would implicate + a complete kernel rebuild. +* Some firmware files may be really large in size. The remote-proc subsystem + is an example subsystem which deals with these sorts of firmware +* The firmware may need to be scraped out from some device specific location + dynamically, an example is calibration data for for some WiFi chipsets. This + calibration data can be unique per sold device. + diff --git a/Documentation/driver-api/firmware/core.rst b/Documentation/driver-api/firmware/core.rst new file mode 100644 index 000000000000..1d1688cbc078 --- /dev/null +++ b/Documentation/driver-api/firmware/core.rst @@ -0,0 +1,16 @@ +========================== +Firmware API core features +========================== + +The firmware API has a rich set of core features available. This section +documents these features. + +.. toctree:: + + fw_search_path + built-in-fw + firmware_cache + direct-fs-lookup + fallback-mechanisms + lookup-order + diff --git a/Documentation/driver-api/firmware/direct-fs-lookup.rst b/Documentation/driver-api/firmware/direct-fs-lookup.rst new file mode 100644 index 000000000000..82b4d585a213 --- /dev/null +++ b/Documentation/driver-api/firmware/direct-fs-lookup.rst @@ -0,0 +1,30 @@ +======================== +Direct filesystem lookup +======================== + +Direct filesystem lookup is the most common form of firmware lookup performed +by the kernel. The kernel looks for the firmware directly on the root +filesystem in the paths documented in the section 'Firmware search paths'. +The filesystem lookup is implemented in fw_get_filesystem_firmware(), it +uses common core kernel file loader facility kernel_read_file_from_path(). +The max path allowed is PATH_MAX -- currently this is 4096 characters. + +It is recommended you keep /lib/firmware paths on your root filesystem, +avoid having a separate partition for them in order to avoid possible +races with lookups and avoid uses of the custom fallback mechanisms +documented below. + +Firmware and initramfs +---------------------- + +Drivers which are built-in to the kernel should have the firmware integrated +also as part of the initramfs used to boot the kernel given that otherwise +a race is possible with loading the driver and the real rootfs not yet being +available. Stuffing the firmware into initramfs resolves this race issue, +however note that using initrd does not suffice to address the same race. + +There are circumstances that justify not wanting to include firmware into +initramfs, such as dealing with large firmware firmware files for the +remote-proc subsystem. For such cases using a userspace fallback mechanism +is currently the only viable solution as only userspace can know for sure +when the real rootfs is ready and mounted. diff --git a/Documentation/driver-api/firmware/fallback-mechanisms.rst b/Documentation/driver-api/firmware/fallback-mechanisms.rst new file mode 100644 index 000000000000..d19354794e67 --- /dev/null +++ b/Documentation/driver-api/firmware/fallback-mechanisms.rst @@ -0,0 +1,195 @@ +=================== +Fallback mechanisms +=================== + +A fallback mechanism is supported to allow to overcome failures to do a direct +filesystem lookup on the root filesystem or when the firmware simply cannot be +installed for practical reasons on the root filesystem. The kernel +configuration options related to supporting the firmware fallback mechanism are: + + * CONFIG_FW_LOADER_USER_HELPER: enables building the firmware fallback + mechanism. Most distributions enable this option today. If enabled but + CONFIG_FW_LOADER_USER_HELPER_FALLBACK is disabled, only the custom fallback + mechanism is available and for the request_firmware_nowait() call. + * CONFIG_FW_LOADER_USER_HELPER_FALLBACK: force enables each request to + enable the kobject uevent fallback mechanism on all firmware API calls + except request_firmware_direct(). Most distributions disable this option + today. The call request_firmware_nowait() allows for one alternative + fallback mechanism: if this kconfig option is enabled and your second + argument to request_firmware_nowait(), uevent, is set to false you are + informing the kernel that you have a custom fallback mechanism and it will + manually load the firmware. Read below for more details. + +Note that this means when having this configuration: + +CONFIG_FW_LOADER_USER_HELPER=y +CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n + +the kobject uevent fallback mechanism will never take effect even +for request_firmware_nowait() when uevent is set to true. + +Justifying the firmware fallback mechanism +========================================== + +Direct filesystem lookups may fail for a variety of reasons. Known reasons for +this are worth itemizing and documenting as it justifies the need for the +fallback mechanism: + +* Race against access with the root filesystem upon bootup. + +* Races upon resume from suspend. This is resolved by the firmware cache, but + the firmware cache is only supported if you use uevents, and its not + supported for request_firmware_into_buf(). + +* Firmware is not accessible through typical means: + * It cannot be installed into the root filesystem + * The firmware provides very unique device specific data tailored for + the unit gathered with local information. An example is calibration + data for WiFi chipsets for mobile devices. This calibration data is + not common to all units, but tailored per unit. Such information may + be installed on a separate flash partition other than where the root + filesystem is provided. + +Types of fallback mechanisms +============================ + +There are really two fallback mechanisms available using one shared sysfs +interface as a loading facility: + +* Kobject uevent fallback mechanism +* Custom fallback mechanism + +First lets document the shared sysfs loading facility. + +Firmware sysfs loading facility +=============================== + +In order to help device drivers upload firmware using a fallback mechanism +the firmware infrastructure creates a sysfs interface to enable userspace +to load and indicate when firmware is ready. The sysfs directory is created +via fw_create_instance(). This call creates a new struct device named after +the firmware requested, and establishes it in the device hierarchy by +associating the device used to make the request as the device's parent. +The sysfs directory's file attributes are defined and controlled through +the new device's class (firmare_class) and group (fw_dev_attr_groups). +This is actually where the original firmware_class.c file name comes from, +as originally the only firmware loading mechanism available was the +mechanism we now use as a fallback mechanism. + +To load firmware using the sysfs interface we expose a loading indicator, +and a file upload firmware into: + + * /sys/$DEVPATH/loading + * /sys/$DEVPATH/data + +To upload firmware you will echo 1 onto the loading file to indicate +you are loading firmware. You then cat the firmware into the data file, +and you notify the kernel the firmware is ready by echo'ing 0 onto +the loading file. + +The firmware device used to help load firmware using sysfs is only created if +direct firmware loading fails and if the fallback mechanism is enabled for your +firmware request, this is set up with fw_load_from_user_helper(). It is +important to re-iterate that no device is created if a direct filesystem lookup +succeeded. + +Using:: + + echo 1 > /sys/$DEVPATH/loading + +Will clean any previous partial load at once and make the firmware API +return an error. When loading firmware the firmware_class grows a buffer +for the firmware in PAGE_SIZE increments to hold the image as it comes in. + +firmware_data_read() and firmware_loading_show() are just provided for the +test_firmware driver for testing, they are not called in normal use or +expected to be used regularly by userspace. + +Firmware kobject uevent fallback mechanism +========================================== + +Since a device is created for the sysfs interface to help load firmware as a +fallback mechanism userspace can be informed of the addition of the device by +relying on kobject uevents. The addition of the device into the device +hierarchy means the fallback mechanism for firmware loading has been initiated. +For details of implementation refer to _request_firmware_load(), in particular +on the use of dev_set_uevent_suppress() and kobject_uevent(). + +The kernel's kobject uevent mechanism is implemented in lib/kobject_uevent.c, +it issues uevents to userspace. As a supplement to kobject uevents Linux +distributions could also enable CONFIG_UEVENT_HELPER_PATH, which makes use of +core kernel's usermode helper (UMH) functionality to call out to a userspace +helper for kobject uevents. In practice though no standard distribution has +ever used the CONFIG_UEVENT_HELPER_PATH. If CONFIG_UEVENT_HELPER_PATH is +enabled this binary would be called each time kobject_uevent_env() gets called +in the kernel for each kobject uevent triggered. + +Different implementations have been supported in userspace to take advantage of +this fallback mechanism. When firmware loading was only possible using the +sysfs mechanism the userspace component "hotplug" provided the functionality of +monitoring for kobject events. Historically this was superseded be systemd's +udev, however firmware loading support was removed from udev as of systemd +commit be2ea723b1d0 ("udev: remove userspace firmware loading support") +as of v217 on August, 2014. This means most Linux distributions today are +not using or taking advantage of the firmware fallback mechanism provided +by kobject uevents. This is specially exacerbated due to the fact that most +distributions today disable CONFIG_FW_LOADER_USER_HELPER_FALLBACK. + +Refer to do_firmware_uevent() for details of the kobject event variables +setup. Variables passwdd with a kobject add event: + +* FIRMWARE=firmware name +* TIMEOUT=timeout value +* ASYNC=whether or not the API request was asynchronous + +By default DEVPATH is set by the internal kernel kobject infrastructure. +Below is an example simple kobject uevent script:: + + # Both $DEVPATH and $FIRMWARE are already provided in the environment. + MY_FW_DIR=/lib/firmware/ + echo 1 > /sys/$DEVPATH/loading + cat $MY_FW_DIR/$FIRMWARE > /sys/$DEVPATH/data + echo 0 > /sys/$DEVPATH/loading + +Firmware custom fallback mechanism +================================== + +Users of the request_firmware_nowait() call have yet another option available +at their disposal: rely on the sysfs fallback mechanism but request that no +kobject uevents be issued to userspace. The original logic behind this +was that utilities other than udev might be required to lookup firmware +in non-traditional paths -- paths outside of the listing documented in the +section 'Direct filesystem lookup'. This option is not available to any of +the other API calls as uevents are always forced for them. + +Since uevents are only meaningful if the fallback mechanism is enabled +in your kernel it would seem odd to enable uevents with kernels that do not +have the fallback mechanism enabled in their kernels. Unfortunately we also +rely on the uevent flag which can be disabled by request_firmware_nowait() to +also setup the firmware cache for firmware requests. As documented above, +the firmware cache is only set up if uevent is enabled for an API call. +Although this can disable the firmware cache for request_firmware_nowait() +calls, users of this API should not use it for the purposes of disabling +the cache as that was not the original purpose of the flag. Not setting +the uevent flag means you want to opt-in for the firmware fallback mechanism +but you want to suppress kobject uevents, as you have a custom solution which +will monitor for your device addition into the device hierarchy somehow and +load firmware for you through a custom path. + +Firmware fallback timeout +========================= + +The firmware fallback mechanism has a timeout. If firmware is not loaded +onto the sysfs interface by the timeout value an error is sent to the +driver. By default the timeout is set to 60 seconds if uevents are +desirable, otherwise MAX_JIFFY_OFFSET is used (max timeout possible). +The logic behind using MAX_JIFFY_OFFSET for non-uevents is that a custom +solution will have as much time as it needs to load firmware. + +You can customize the firmware timeout by echo'ing your desired timeout into +the following file: + +* /sys/class/firmware/timeout + +If you echo 0 into it means MAX_JIFFY_OFFSET will be used. The data type +for the timeout is an int. diff --git a/Documentation/driver-api/firmware/firmware_cache.rst b/Documentation/driver-api/firmware/firmware_cache.rst new file mode 100644 index 000000000000..2210e5bfb332 --- /dev/null +++ b/Documentation/driver-api/firmware/firmware_cache.rst @@ -0,0 +1,51 @@ +============== +Firmware cache +============== + +When Linux resumes from suspend some device drivers require firmware lookups to +re-initialize devices. During resume there may be a period of time during which +firmware lookups are not possible, during this short period of time firmware +requests will fail. Time is of essence though, and delaying drivers to wait for +the root filesystem for firmware delays user experience with device +functionality. In order to support these requirements the firmware +infrastructure implements a firmware cache for device drivers for most API +calls, automatically behind the scenes. + +The firmware cache makes using certain firmware API calls safe during a device +driver's suspend and resume callback. Users of these API calls needn't cache +the firmware by themselves for dealing with firmware loss during system resume. + +The firmware cache works by requesting for firmware prior to suspend and +caching it in memory. Upon resume device drivers using the firmware API will +have access to the firmware immediately, without having to wait for the root +filesystem to mount or dealing with possible race issues with lookups as the +root filesystem mounts. + +Some implementation details about the firmware cache setup: + +* The firmware cache is setup by adding a devres entry for each device that + uses all synchronous call except :c:func:`request_firmware_into_buf`. + +* If an asynchronous call is used the firmware cache is only set up for a + device if if the second argument (uevent) to request_firmware_nowait() is + true. When uevent is true it requests that a kobject uevent be sent to + userspace for the firmware request. For details refer to the Fackback + mechanism documented below. + +* If the firmware cache is determined to be needed as per the above two + criteria the firmware cache is setup by adding a devres entry for the + device making the firmware request. + +* The firmware devres entry is maintained throughout the lifetime of the + device. This means that even if you release_firmware() the firmware cache + will still be used on resume from suspend. + +* The timeout for the fallback mechanism is temporarily reduced to 10 seconds + as the firmware cache is set up during suspend, the timeout is set back to + the old value you had configured after the cache is set up. + +* Upon suspend any pending non-uevent firmware requests are killed to avoid + stalling the kernel, this is done with kill_requests_without_uevent(). Kernel + calls requiring the non-uevent therefore need to implement their own firmware + cache mechanism but must not use the firmware API on suspend. + diff --git a/Documentation/driver-api/firmware/fw_search_path.rst b/Documentation/driver-api/firmware/fw_search_path.rst new file mode 100644 index 000000000000..a360f1009fa3 --- /dev/null +++ b/Documentation/driver-api/firmware/fw_search_path.rst @@ -0,0 +1,26 @@ +===================== +Firmware search paths +===================== + +The following search paths are used to look for firmware on your +root filesystem. + +* fw_path_para - module parameter - default is empty so this is ignored +* /lib/firmware/updates/UTS_RELEASE/ +* /lib/firmware/updates/ +* /lib/firmware/UTS_RELEASE/ +* /lib/firmware/ + +The module parameter ''path'' can be passed to the firmware_class module +to activate the first optional custom fw_path_para. The custom path can +only be up to 256 characters long. The kernel parameter passed would be: + +* 'firmware_class.path=$CUSTOMIZED_PATH' + +There is an alternative to customize the path at run time after bootup, you +can use the file: + +* /sys/module/firmware_class/parameters/path + +You would echo into it your custom path and firmware requested will be +searched for there first. diff --git a/Documentation/driver-api/firmware/index.rst b/Documentation/driver-api/firmware/index.rst new file mode 100644 index 000000000000..1abe01793031 --- /dev/null +++ b/Documentation/driver-api/firmware/index.rst @@ -0,0 +1,16 @@ +================== +Linux Firmware API +================== + +.. toctree:: + + introduction + core + request_firmware + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/driver-api/firmware/introduction.rst b/Documentation/driver-api/firmware/introduction.rst new file mode 100644 index 000000000000..211cb44eb972 --- /dev/null +++ b/Documentation/driver-api/firmware/introduction.rst @@ -0,0 +1,27 @@ +============ +Introduction +============ + +The firmware API enables kernel code to request files required +for functionality from userspace, the uses vary: + +* Microcode for CPU errata +* Device driver firmware, required to be loaded onto device + microcontrollers +* Device driver information data (calibration data, EEPROM overrides), + some of which can be completely optional. + +Types of firmware requests +========================== + +There are two types of calls: + +* Synchronous +* Asynchronous + +Which one you use vary depending on your requirements, the rule of thumb +however is you should strive to use the asynchronous APIs unless you also +are already using asynchronous initialization mechanisms which will not +stall or delay boot. Even if loading firmware does not take a lot of time +processing firmware might, and this can still delay boot or initialization, +as such mechanisms such as asynchronous probe can help supplement drivers. diff --git a/Documentation/driver-api/firmware/lookup-order.rst b/Documentation/driver-api/firmware/lookup-order.rst new file mode 100644 index 000000000000..88c81739683c --- /dev/null +++ b/Documentation/driver-api/firmware/lookup-order.rst @@ -0,0 +1,18 @@ +===================== +Firmware lookup order +===================== + +Different functionality is available to enable firmware to be found. +Below is chronological order of how firmware will be looked for once +a driver issues a firmware API call. + +* The ''Built-in firmware'' is checked first, if the firmware is present we + return it immediately +* The ''Firmware cache'' is looked at next. If the firmware is found we + return it immediately +* The ''Direct filesystem lookup'' is performed next, if found we + return it immediately +* If no firmware has been found and the fallback mechanism was enabled + the sysfs interface is created. After this either a kobject uevent + is issued or the custom firmware loading is relied upon for firmware + loading up to the timeout value. diff --git a/Documentation/driver-api/firmware/request_firmware.rst b/Documentation/driver-api/firmware/request_firmware.rst new file mode 100644 index 000000000000..cc0aea880824 --- /dev/null +++ b/Documentation/driver-api/firmware/request_firmware.rst @@ -0,0 +1,56 @@ +==================== +request_firmware API +==================== + +You would typically load firmware and then load it into your device somehow. +The typical firmware work flow is reflected below:: + + if(request_firmware(&fw_entry, $FIRMWARE, device) == 0) + copy_fw_to_device(fw_entry->data, fw_entry->size); + release_firmware(fw_entry); + +Synchronous firmware requests +============================= + +Synchronous firmware requests will wait until the firmware is found or until +an error is returned. + +request_firmware +---------------- +.. kernel-doc:: drivers/base/firmware_class.c + :functions: request_firmware + +request_firmware_direct +----------------------- +.. kernel-doc:: drivers/base/firmware_class.c + :functions: request_firmware_direct + +request_firmware_into_buf +------------------------- +.. kernel-doc:: drivers/base/firmware_class.c + :functions: request_firmware_into_buf + +Asynchronous firmware requests +============================== + +Asynchronous firmware requests allow driver code to not have to wait +until the firmware or an error is returned. Function callbacks are +provided so that when the firmware or an error is found the driver is +informed through the callback. request_firmware_nowait() cannot be called +in atomic contexts. + +request_firmware_nowait +----------------------- +.. kernel-doc:: drivers/base/firmware_class.c + :functions: request_firmware_nowait + +request firmware API expected driver use +======================================== + +Once an API call returns you process the firmware and then release the +firmware. For example if you used request_firmware() and it returns, +the driver has the firmware image accessible in fw_entry->{data,size}. +If something went wrong request_firmware() returns non-zero and fw_entry +is set to NULL. Once your driver is done with processing the firmware it +can call call release_firmware(fw_entry) to release the firmware image +and any related resource. diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index ea580c0aa232..60db00d1532b 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -34,6 +34,8 @@ available subsections can be seen below. miscellaneous vme 80211/index + uio-howto + firmware/index .. only:: subproject and html diff --git a/Documentation/driver-api/infrastructure.rst b/Documentation/driver-api/infrastructure.rst index 0bb0b5fc9512..6d9ff316b608 100644 --- a/Documentation/driver-api/infrastructure.rst +++ b/Documentation/driver-api/infrastructure.rst @@ -55,21 +55,6 @@ Device Drivers DMA Management .. kernel-doc:: drivers/base/dma-mapping.c :export: -Device Drivers Power Management -------------------------------- - -.. kernel-doc:: drivers/base/power/main.c - :export: - -Device Drivers ACPI Support ---------------------------- - -.. kernel-doc:: drivers/acpi/scan.c - :export: - -.. kernel-doc:: drivers/acpi/scan.c - :internal: - Device drivers PnP support -------------------------- diff --git a/Documentation/driver-api/uio-howto.rst b/Documentation/driver-api/uio-howto.rst new file mode 100644 index 000000000000..f73d660b2956 --- /dev/null +++ b/Documentation/driver-api/uio-howto.rst @@ -0,0 +1,705 @@ +======================= +The Userspace I/O HOWTO +======================= + +:Author: Hans-Jürgen Koch Linux developer, Linutronix +:Date: 2006-12-11 + +About this document +=================== + +Translations +------------ + +If you know of any translations for this document, or you are interested +in translating it, please email me hjk@hansjkoch.de. + +Preface +------- + +For many types of devices, creating a Linux kernel driver is overkill. +All that is really needed is some way to handle an interrupt and provide +access to the memory space of the device. The logic of controlling the +device does not necessarily have to be within the kernel, as the device +does not need to take advantage of any of other resources that the +kernel provides. One such common class of devices that are like this are +for industrial I/O cards. + +To address this situation, the userspace I/O system (UIO) was designed. +For typical industrial I/O cards, only a very small kernel module is +needed. The main part of the driver will run in user space. This +simplifies development and reduces the risk of serious bugs within a +kernel module. + +Please note that UIO is not an universal driver interface. Devices that +are already handled well by other kernel subsystems (like networking or +serial or USB) are no candidates for an UIO driver. Hardware that is +ideally suited for an UIO driver fulfills all of the following: + +- The device has memory that can be mapped. The device can be + controlled completely by writing to this memory. + +- The device usually generates interrupts. + +- The device does not fit into one of the standard kernel subsystems. + +Acknowledgments +--------------- + +I'd like to thank Thomas Gleixner and Benedikt Spranger of Linutronix, +who have not only written most of the UIO code, but also helped greatly +writing this HOWTO by giving me all kinds of background information. + +Feedback +-------- + +Find something wrong with this document? (Or perhaps something right?) I +would love to hear from you. Please email me at hjk@hansjkoch.de. + +About UIO +========= + +If you use UIO for your card's driver, here's what you get: + +- only one small kernel module to write and maintain. + +- develop the main part of your driver in user space, with all the + tools and libraries you're used to. + +- bugs in your driver won't crash the kernel. + +- updates of your driver can take place without recompiling the kernel. + +How UIO works +------------- + +Each UIO device is accessed through a device file and several sysfs +attribute files. The device file will be called ``/dev/uio0`` for the +first device, and ``/dev/uio1``, ``/dev/uio2`` and so on for subsequent +devices. + +``/dev/uioX`` is used to access the address space of the card. Just use +:c:func:`mmap()` to access registers or RAM locations of your card. + +Interrupts are handled by reading from ``/dev/uioX``. A blocking +:c:func:`read()` from ``/dev/uioX`` will return as soon as an +interrupt occurs. You can also use :c:func:`select()` on +``/dev/uioX`` to wait for an interrupt. The integer value read from +``/dev/uioX`` represents the total interrupt count. You can use this +number to figure out if you missed some interrupts. + +For some hardware that has more than one interrupt source internally, +but not separate IRQ mask and status registers, there might be +situations where userspace cannot determine what the interrupt source +was if the kernel handler disables them by writing to the chip's IRQ +register. In such a case, the kernel has to disable the IRQ completely +to leave the chip's register untouched. Now the userspace part can +determine the cause of the interrupt, but it cannot re-enable +interrupts. Another cornercase is chips where re-enabling interrupts is +a read-modify-write operation to a combined IRQ status/acknowledge +register. This would be racy if a new interrupt occurred simultaneously. + +To address these problems, UIO also implements a write() function. It is +normally not used and can be ignored for hardware that has only a single +interrupt source or has separate IRQ mask and status registers. If you +need it, however, a write to ``/dev/uioX`` will call the +:c:func:`irqcontrol()` function implemented by the driver. You have +to write a 32-bit value that is usually either 0 or 1 to disable or +enable interrupts. If a driver does not implement +:c:func:`irqcontrol()`, :c:func:`write()` will return with +``-ENOSYS``. + +To handle interrupts properly, your custom kernel module can provide its +own interrupt handler. It will automatically be called by the built-in +handler. + +For cards that don't generate interrupts but need to be polled, there is +the possibility to set up a timer that triggers the interrupt handler at +configurable time intervals. This interrupt simulation is done by +calling :c:func:`uio_event_notify()` from the timer's event +handler. + +Each driver provides attributes that are used to read or write +variables. These attributes are accessible through sysfs files. A custom +kernel driver module can add its own attributes to the device owned by +the uio driver, but not added to the UIO device itself at this time. +This might change in the future if it would be found to be useful. + +The following standard attributes are provided by the UIO framework: + +- ``name``: The name of your device. It is recommended to use the name + of your kernel module for this. + +- ``version``: A version string defined by your driver. This allows the + user space part of your driver to deal with different versions of the + kernel module. + +- ``event``: The total number of interrupts handled by the driver since + the last time the device node was read. + +These attributes appear under the ``/sys/class/uio/uioX`` directory. +Please note that this directory might be a symlink, and not a real +directory. Any userspace code that accesses it must be able to handle +this. + +Each UIO device can make one or more memory regions available for memory +mapping. This is necessary because some industrial I/O cards require +access to more than one PCI memory region in a driver. + +Each mapping has its own directory in sysfs, the first mapping appears +as ``/sys/class/uio/uioX/maps/map0/``. Subsequent mappings create +directories ``map1/``, ``map2/``, and so on. These directories will only +appear if the size of the mapping is not 0. + +Each ``mapX/`` directory contains four read-only files that show +attributes of the memory: + +- ``name``: A string identifier for this mapping. This is optional, the + string can be empty. Drivers can set this to make it easier for + userspace to find the correct mapping. + +- ``addr``: The address of memory that can be mapped. + +- ``size``: The size, in bytes, of the memory pointed to by addr. + +- ``offset``: The offset, in bytes, that has to be added to the pointer + returned by :c:func:`mmap()` to get to the actual device memory. + This is important if the device's memory is not page aligned. + Remember that pointers returned by :c:func:`mmap()` are always + page aligned, so it is good style to always add this offset. + +From userspace, the different mappings are distinguished by adjusting +the ``offset`` parameter of the :c:func:`mmap()` call. To map the +memory of mapping N, you have to use N times the page size as your +offset:: + + offset = N * getpagesize(); + +Sometimes there is hardware with memory-like regions that can not be +mapped with the technique described here, but there are still ways to +access them from userspace. The most common example are x86 ioports. On +x86 systems, userspace can access these ioports using +:c:func:`ioperm()`, :c:func:`iopl()`, :c:func:`inb()`, +:c:func:`outb()`, and similar functions. + +Since these ioport regions can not be mapped, they will not appear under +``/sys/class/uio/uioX/maps/`` like the normal memory described above. +Without information about the port regions a hardware has to offer, it +becomes difficult for the userspace part of the driver to find out which +ports belong to which UIO device. + +To address this situation, the new directory +``/sys/class/uio/uioX/portio/`` was added. It only exists if the driver +wants to pass information about one or more port regions to userspace. +If that is the case, subdirectories named ``port0``, ``port1``, and so +on, will appear underneath ``/sys/class/uio/uioX/portio/``. + +Each ``portX/`` directory contains four read-only files that show name, +start, size, and type of the port region: + +- ``name``: A string identifier for this port region. The string is + optional and can be empty. Drivers can set it to make it easier for + userspace to find a certain port region. + +- ``start``: The first port of this region. + +- ``size``: The number of ports in this region. + +- ``porttype``: A string describing the type of port. + +Writing your own kernel module +============================== + +Please have a look at ``uio_cif.c`` as an example. The following +paragraphs explain the different sections of this file. + +struct uio_info +--------------- + +This structure tells the framework the details of your driver, Some of +the members are required, others are optional. + +- ``const char *name``: Required. The name of your driver as it will + appear in sysfs. I recommend using the name of your module for this. + +- ``const char *version``: Required. This string appears in + ``/sys/class/uio/uioX/version``. + +- ``struct uio_mem mem[ MAX_UIO_MAPS ]``: Required if you have memory + that can be mapped with :c:func:`mmap()`. For each mapping you + need to fill one of the ``uio_mem`` structures. See the description + below for details. + +- ``struct uio_port port[ MAX_UIO_PORTS_REGIONS ]``: Required if you + want to pass information about ioports to userspace. For each port + region you need to fill one of the ``uio_port`` structures. See the + description below for details. + +- ``long irq``: Required. If your hardware generates an interrupt, it's + your modules task to determine the irq number during initialization. + If you don't have a hardware generated interrupt but want to trigger + the interrupt handler in some other way, set ``irq`` to + ``UIO_IRQ_CUSTOM``. If you had no interrupt at all, you could set + ``irq`` to ``UIO_IRQ_NONE``, though this rarely makes sense. + +- ``unsigned long irq_flags``: Required if you've set ``irq`` to a + hardware interrupt number. The flags given here will be used in the + call to :c:func:`request_irq()`. + +- ``int (*mmap)(struct uio_info *info, struct vm_area_struct *vma)``: + Optional. If you need a special :c:func:`mmap()` + function, you can set it here. If this pointer is not NULL, your + :c:func:`mmap()` will be called instead of the built-in one. + +- ``int (*open)(struct uio_info *info, struct inode *inode)``: + Optional. You might want to have your own :c:func:`open()`, + e.g. to enable interrupts only when your device is actually used. + +- ``int (*release)(struct uio_info *info, struct inode *inode)``: + Optional. If you define your own :c:func:`open()`, you will + probably also want a custom :c:func:`release()` function. + +- ``int (*irqcontrol)(struct uio_info *info, s32 irq_on)``: + Optional. If you need to be able to enable or disable interrupts + from userspace by writing to ``/dev/uioX``, you can implement this + function. The parameter ``irq_on`` will be 0 to disable interrupts + and 1 to enable them. + +Usually, your device will have one or more memory regions that can be +mapped to user space. For each region, you have to set up a +``struct uio_mem`` in the ``mem[]`` array. Here's a description of the +fields of ``struct uio_mem``: + +- ``const char *name``: Optional. Set this to help identify the memory + region, it will show up in the corresponding sysfs node. + +- ``int memtype``: Required if the mapping is used. Set this to + ``UIO_MEM_PHYS`` if you you have physical memory on your card to be + mapped. Use ``UIO_MEM_LOGICAL`` for logical memory (e.g. allocated + with :c:func:`kmalloc()`). There's also ``UIO_MEM_VIRTUAL`` for + virtual memory. + +- ``phys_addr_t addr``: Required if the mapping is used. Fill in the + address of your memory block. This address is the one that appears in + sysfs. + +- ``resource_size_t size``: Fill in the size of the memory block that + ``addr`` points to. If ``size`` is zero, the mapping is considered + unused. Note that you *must* initialize ``size`` with zero for all + unused mappings. + +- ``void *internal_addr``: If you have to access this memory region + from within your kernel module, you will want to map it internally by + using something like :c:func:`ioremap()`. Addresses returned by + this function cannot be mapped to user space, so you must not store + it in ``addr``. Use ``internal_addr`` instead to remember such an + address. + +Please do not touch the ``map`` element of ``struct uio_mem``! It is +used by the UIO framework to set up sysfs files for this mapping. Simply +leave it alone. + +Sometimes, your device can have one or more port regions which can not +be mapped to userspace. But if there are other possibilities for +userspace to access these ports, it makes sense to make information +about the ports available in sysfs. For each region, you have to set up +a ``struct uio_port`` in the ``port[]`` array. Here's a description of +the fields of ``struct uio_port``: + +- ``char *porttype``: Required. Set this to one of the predefined + constants. Use ``UIO_PORT_X86`` for the ioports found in x86 + architectures. + +- ``unsigned long start``: Required if the port region is used. Fill in + the number of the first port of this region. + +- ``unsigned long size``: Fill in the number of ports in this region. + If ``size`` is zero, the region is considered unused. Note that you + *must* initialize ``size`` with zero for all unused regions. + +Please do not touch the ``portio`` element of ``struct uio_port``! It is +used internally by the UIO framework to set up sysfs files for this +region. Simply leave it alone. + +Adding an interrupt handler +--------------------------- + +What you need to do in your interrupt handler depends on your hardware +and on how you want to handle it. You should try to keep the amount of +code in your kernel interrupt handler low. If your hardware requires no +action that you *have* to perform after each interrupt, then your +handler can be empty. + +If, on the other hand, your hardware *needs* some action to be performed +after each interrupt, then you *must* do it in your kernel module. Note +that you cannot rely on the userspace part of your driver. Your +userspace program can terminate at any time, possibly leaving your +hardware in a state where proper interrupt handling is still required. + +There might also be applications where you want to read data from your +hardware at each interrupt and buffer it in a piece of kernel memory +you've allocated for that purpose. With this technique you could avoid +loss of data if your userspace program misses an interrupt. + +A note on shared interrupts: Your driver should support interrupt +sharing whenever this is possible. It is possible if and only if your +driver can detect whether your hardware has triggered the interrupt or +not. This is usually done by looking at an interrupt status register. If +your driver sees that the IRQ bit is actually set, it will perform its +actions, and the handler returns IRQ_HANDLED. If the driver detects +that it was not your hardware that caused the interrupt, it will do +nothing and return IRQ_NONE, allowing the kernel to call the next +possible interrupt handler. + +If you decide not to support shared interrupts, your card won't work in +computers with no free interrupts. As this frequently happens on the PC +platform, you can save yourself a lot of trouble by supporting interrupt +sharing. + +Using uio_pdrv for platform devices +----------------------------------- + +In many cases, UIO drivers for platform devices can be handled in a +generic way. In the same place where you define your +``struct platform_device``, you simply also implement your interrupt +handler and fill your ``struct uio_info``. A pointer to this +``struct uio_info`` is then used as ``platform_data`` for your platform +device. + +You also need to set up an array of ``struct resource`` containing +addresses and sizes of your memory mappings. This information is passed +to the driver using the ``.resource`` and ``.num_resources`` elements of +``struct platform_device``. + +You now have to set the ``.name`` element of ``struct platform_device`` +to ``"uio_pdrv"`` to use the generic UIO platform device driver. This +driver will fill the ``mem[]`` array according to the resources given, +and register the device. + +The advantage of this approach is that you only have to edit a file you +need to edit anyway. You do not have to create an extra driver. + +Using uio_pdrv_genirq for platform devices +------------------------------------------ + +Especially in embedded devices, you frequently find chips where the irq +pin is tied to its own dedicated interrupt line. In such cases, where +you can be really sure the interrupt is not shared, we can take the +concept of ``uio_pdrv`` one step further and use a generic interrupt +handler. That's what ``uio_pdrv_genirq`` does. + +The setup for this driver is the same as described above for +``uio_pdrv``, except that you do not implement an interrupt handler. The +``.handler`` element of ``struct uio_info`` must remain ``NULL``. The +``.irq_flags`` element must not contain ``IRQF_SHARED``. + +You will set the ``.name`` element of ``struct platform_device`` to +``"uio_pdrv_genirq"`` to use this driver. + +The generic interrupt handler of ``uio_pdrv_genirq`` will simply disable +the interrupt line using :c:func:`disable_irq_nosync()`. After +doing its work, userspace can reenable the interrupt by writing +0x00000001 to the UIO device file. The driver already implements an +:c:func:`irq_control()` to make this possible, you must not +implement your own. + +Using ``uio_pdrv_genirq`` not only saves a few lines of interrupt +handler code. You also do not need to know anything about the chip's +internal registers to create the kernel part of the driver. All you need +to know is the irq number of the pin the chip is connected to. + +Using uio_dmem_genirq for platform devices +------------------------------------------ + +In addition to statically allocated memory ranges, they may also be a +desire to use dynamically allocated regions in a user space driver. In +particular, being able to access memory made available through the +dma-mapping API, may be particularly useful. The ``uio_dmem_genirq`` +driver provides a way to accomplish this. + +This driver is used in a similar manner to the ``"uio_pdrv_genirq"`` +driver with respect to interrupt configuration and handling. + +Set the ``.name`` element of ``struct platform_device`` to +``"uio_dmem_genirq"`` to use this driver. + +When using this driver, fill in the ``.platform_data`` element of +``struct platform_device``, which is of type +``struct uio_dmem_genirq_pdata`` and which contains the following +elements: + +- ``struct uio_info uioinfo``: The same structure used as the + ``uio_pdrv_genirq`` platform data + +- ``unsigned int *dynamic_region_sizes``: Pointer to list of sizes of + dynamic memory regions to be mapped into user space. + +- ``unsigned int num_dynamic_regions``: Number of elements in + ``dynamic_region_sizes`` array. + +The dynamic regions defined in the platform data will be appended to the +`` mem[] `` array after the platform device resources, which implies +that the total number of static and dynamic memory regions cannot exceed +``MAX_UIO_MAPS``. + +The dynamic memory regions will be allocated when the UIO device file, +``/dev/uioX`` is opened. Similar to static memory resources, the memory +region information for dynamic regions is then visible via sysfs at +``/sys/class/uio/uioX/maps/mapY/*``. The dynamic memory regions will be +freed when the UIO device file is closed. When no processes are holding +the device file open, the address returned to userspace is ~0. + +Writing a driver in userspace +============================= + +Once you have a working kernel module for your hardware, you can write +the userspace part of your driver. You don't need any special libraries, +your driver can be written in any reasonable language, you can use +floating point numbers and so on. In short, you can use all the tools +and libraries you'd normally use for writing a userspace application. + +Getting information about your UIO device +----------------------------------------- + +Information about all UIO devices is available in sysfs. The first thing +you should do in your driver is check ``name`` and ``version`` to make +sure your talking to the right device and that its kernel driver has the +version you expect. + +You should also make sure that the memory mapping you need exists and +has the size you expect. + +There is a tool called ``lsuio`` that lists UIO devices and their +attributes. It is available here: + +http://www.osadl.org/projects/downloads/UIO/user/ + +With ``lsuio`` you can quickly check if your kernel module is loaded and +which attributes it exports. Have a look at the manpage for details. + +The source code of ``lsuio`` can serve as an example for getting +information about an UIO device. The file ``uio_helper.c`` contains a +lot of functions you could use in your userspace driver code. + +mmap() device memory +-------------------- + +After you made sure you've got the right device with the memory mappings +you need, all you have to do is to call :c:func:`mmap()` to map the +device's memory to userspace. + +The parameter ``offset`` of the :c:func:`mmap()` call has a special +meaning for UIO devices: It is used to select which mapping of your +device you want to map. To map the memory of mapping N, you have to use +N times the page size as your offset:: + + offset = N * getpagesize(); + +N starts from zero, so if you've got only one memory range to map, set +``offset = 0``. A drawback of this technique is that memory is always +mapped beginning with its start address. + +Waiting for interrupts +---------------------- + +After you successfully mapped your devices memory, you can access it +like an ordinary array. Usually, you will perform some initialization. +After that, your hardware starts working and will generate an interrupt +as soon as it's finished, has some data available, or needs your +attention because an error occurred. + +``/dev/uioX`` is a read-only file. A :c:func:`read()` will always +block until an interrupt occurs. There is only one legal value for the +``count`` parameter of :c:func:`read()`, and that is the size of a +signed 32 bit integer (4). Any other value for ``count`` causes +:c:func:`read()` to fail. The signed 32 bit integer read is the +interrupt count of your device. If the value is one more than the value +you read the last time, everything is OK. If the difference is greater +than one, you missed interrupts. + +You can also use :c:func:`select()` on ``/dev/uioX``. + +Generic PCI UIO driver +====================== + +The generic driver is a kernel module named uio_pci_generic. It can +work with any device compliant to PCI 2.3 (circa 2002) and any compliant +PCI Express device. Using this, you only need to write the userspace +driver, removing the need to write a hardware-specific kernel module. + +Making the driver recognize the device +-------------------------------------- + +Since the driver does not declare any device ids, it will not get loaded +automatically and will not automatically bind to any devices, you must +load it and allocate id to the driver yourself. For example:: + + modprobe uio_pci_generic + echo "8086 10f5" > /sys/bus/pci/drivers/uio_pci_generic/new_id + +If there already is a hardware specific kernel driver for your device, +the generic driver still won't bind to it, in this case if you want to +use the generic driver (why would you?) you'll have to manually unbind +the hardware specific driver and bind the generic driver, like this:: + + echo -n 0000:00:19.0 > /sys/bus/pci/drivers/e1000e/unbind + echo -n 0000:00:19.0 > /sys/bus/pci/drivers/uio_pci_generic/bind + +You can verify that the device has been bound to the driver by looking +for it in sysfs, for example like the following:: + + ls -l /sys/bus/pci/devices/0000:00:19.0/driver + +Which if successful should print:: + + .../0000:00:19.0/driver -> ../../../bus/pci/drivers/uio_pci_generic + +Note that the generic driver will not bind to old PCI 2.2 devices. If +binding the device failed, run the following command:: + + dmesg + +and look in the output for failure reasons. + +Things to know about uio_pci_generic +------------------------------------ + +Interrupts are handled using the Interrupt Disable bit in the PCI +command register and Interrupt Status bit in the PCI status register. +All devices compliant to PCI 2.3 (circa 2002) and all compliant PCI +Express devices should support these bits. uio_pci_generic detects +this support, and won't bind to devices which do not support the +Interrupt Disable Bit in the command register. + +On each interrupt, uio_pci_generic sets the Interrupt Disable bit. +This prevents the device from generating further interrupts until the +bit is cleared. The userspace driver should clear this bit before +blocking and waiting for more interrupts. + +Writing userspace driver using uio_pci_generic +------------------------------------------------ + +Userspace driver can use pci sysfs interface, or the libpci library that +wraps it, to talk to the device and to re-enable interrupts by writing +to the command register. + +Example code using uio_pci_generic +---------------------------------- + +Here is some sample userspace driver code using uio_pci_generic:: + + #include <stdlib.h> + #include <stdio.h> + #include <unistd.h> + #include <sys/types.h> + #include <sys/stat.h> + #include <fcntl.h> + #include <errno.h> + + int main() + { + int uiofd; + int configfd; + int err; + int i; + unsigned icount; + unsigned char command_high; + + uiofd = open("/dev/uio0", O_RDONLY); + if (uiofd < 0) { + perror("uio open:"); + return errno; + } + configfd = open("/sys/class/uio/uio0/device/config", O_RDWR); + if (configfd < 0) { + perror("config open:"); + return errno; + } + + /* Read and cache command value */ + err = pread(configfd, &command_high, 1, 5); + if (err != 1) { + perror("command config read:"); + return errno; + } + command_high &= ~0x4; + + for(i = 0;; ++i) { + /* Print out a message, for debugging. */ + if (i == 0) + fprintf(stderr, "Started uio test driver.\n"); + else + fprintf(stderr, "Interrupts: %d\n", icount); + + /****************************************/ + /* Here we got an interrupt from the + device. Do something to it. */ + /****************************************/ + + /* Re-enable interrupts. */ + err = pwrite(configfd, &command_high, 1, 5); + if (err != 1) { + perror("config write:"); + break; + } + + /* Wait for next interrupt. */ + err = read(uiofd, &icount, 4); + if (err != 4) { + perror("uio read:"); + break; + } + + } + return errno; + } + +Generic Hyper-V UIO driver +========================== + +The generic driver is a kernel module named uio_hv_generic. It +supports devices on the Hyper-V VMBus similar to uio_pci_generic on +PCI bus. + +Making the driver recognize the device +-------------------------------------- + +Since the driver does not declare any device GUID's, it will not get +loaded automatically and will not automatically bind to any devices, you +must load it and allocate id to the driver yourself. For example, to use +the network device GUID:: + + modprobe uio_hv_generic + echo "f8615163-df3e-46c5-913f-f2d2f965ed0e" > /sys/bus/vmbus/drivers/uio_hv_generic/new_id + +If there already is a hardware specific kernel driver for the device, +the generic driver still won't bind to it, in this case if you want to +use the generic driver (why would you?) you'll have to manually unbind +the hardware specific driver and bind the generic driver, like this:: + + echo -n vmbus-ed963694-e847-4b2a-85af-bc9cfc11d6f3 > /sys/bus/vmbus/drivers/hv_netvsc/unbind + echo -n vmbus-ed963694-e847-4b2a-85af-bc9cfc11d6f3 > /sys/bus/vmbus/drivers/uio_hv_generic/bind + +You can verify that the device has been bound to the driver by looking +for it in sysfs, for example like the following:: + + ls -l /sys/bus/vmbus/devices/vmbus-ed963694-e847-4b2a-85af-bc9cfc11d6f3/driver + +Which if successful should print:: + + .../vmbus-ed963694-e847-4b2a-85af-bc9cfc11d6f3/driver -> ../../../bus/vmbus/drivers/uio_hv_generic + +Things to know about uio_hv_generic +----------------------------------- + +On each interrupt, uio_hv_generic sets the Interrupt Disable bit. This +prevents the device from generating further interrupts until the bit is +cleared. The userspace driver should clear this bit before blocking and +waiting for more interrupts. + +Further information +=================== + +- `OSADL homepage. <http://www.osadl.org>`_ + +- `Linutronix homepage. <http://www.linutronix.de>`_ diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index ca9d1eb46bc0..bf34d5b3a733 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt @@ -306,6 +306,11 @@ IRQ devm_request_any_context_irq() devm_request_irq() devm_request_threaded_irq() + devm_irq_alloc_descs() + devm_irq_alloc_desc() + devm_irq_alloc_desc_at() + devm_irq_alloc_desc_from() + devm_irq_alloc_descs_from() LED devm_led_classdev_register() diff --git a/Documentation/extcon/intel-int3496.txt b/Documentation/extcon/intel-int3496.txt new file mode 100644 index 000000000000..af0b366c25b7 --- /dev/null +++ b/Documentation/extcon/intel-int3496.txt @@ -0,0 +1,22 @@ +Intel INT3496 ACPI device extcon driver documentation +----------------------------------------------------- + +The Intel INT3496 ACPI device extcon driver is a driver for ACPI +devices with an acpi-id of INT3496, such as found for example on +Intel Baytrail and Cherrytrail tablets. + +This ACPI device describes how the OS can read the id-pin of the devices' +USB-otg port, as well as how it optionally can enable Vbus output on the +otg port and how it can optionally control the muxing of the data pins +between an USB host and an USB peripheral controller. + +The ACPI devices exposes this functionality by returning an array with up +to 3 gpio descriptors from its ACPI _CRS (Current Resource Settings) call: + +Index 0: The input gpio for the id-pin, this is always present and valid +Index 1: The output gpio for enabling Vbus output from the device to the otg + port, write 1 to enable the Vbus output (this gpio descriptor may + be absent or invalid) +Index 2: The output gpio for muxing of the data pins between the USB host and + the USB peripheral controller, write 1 to mux to the peripheral + controller diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index ace63cd7af8c..fdcfdd79682a 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -58,7 +58,8 @@ prototypes: int (*permission) (struct inode *, int, unsigned int); int (*get_acl)(struct inode *, int); int (*setattr) (struct dentry *, struct iattr *); - int (*getattr) (struct vfsmount *, struct dentry *, struct kstat *); + int (*getattr) (const struct path *, struct dentry *, struct kstat *, + u32, unsigned int); ssize_t (*listxattr) (struct dentry *, char *, size_t); int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start, u64 len); void (*update_time)(struct inode *, struct timespec *, int); diff --git a/Documentation/filesystems/afs.txt b/Documentation/filesystems/afs.txt index ffef91c4e0d6..060da408923b 100644 --- a/Documentation/filesystems/afs.txt +++ b/Documentation/filesystems/afs.txt @@ -64,8 +64,7 @@ USAGE When inserting the driver modules the root cell must be specified along with a list of volume location server IP addresses: - modprobe af_rxrpc - modprobe rxkad + modprobe rxrpc modprobe kafs rootcell=cambridge.redhat.com:172.16.18.73:172.16.18.91 The first module is the AF_RXRPC network protocol driver. This provides the @@ -214,34 +213,3 @@ If a file is opened with a particular key and then the file descriptor is passed to a process that doesn't have that key (perhaps over an AF_UNIX socket), then the operations on the file will be made with key that was used to open the file. - - -======== -EXAMPLES -======== - -Here's what I use to test this. Some of the names and IP addresses are local -to my internal DNS. My "root.afs" partition has a mount point within it for -some public volumes volumes. - -insmod /tmp/rxrpc.o -insmod /tmp/rxkad.o -insmod /tmp/kafs.o rootcell=cambridge.redhat.com:172.16.18.91 - -mount -t afs \%root.afs. /afs -mount -t afs \%cambridge.redhat.com:root.cell. /afs/cambridge.redhat.com/ - -echo add grand.central.org 18.9.48.14:128.2.203.61:130.237.48.87 > /proc/fs/afs/cells -mount -t afs "#grand.central.org:root.cell." /afs/grand.central.org/ -mount -t afs "#grand.central.org:root.archive." /afs/grand.central.org/archive -mount -t afs "#grand.central.org:root.contrib." /afs/grand.central.org/contrib -mount -t afs "#grand.central.org:root.doc." /afs/grand.central.org/doc -mount -t afs "#grand.central.org:root.project." /afs/grand.central.org/project -mount -t afs "#grand.central.org:root.service." /afs/grand.central.org/service -mount -t afs "#grand.central.org:root.software." /afs/grand.central.org/software -mount -t afs "#grand.central.org:root.user." /afs/grand.central.org/user - -umount /afs -rmmod kafs -rmmod rxkad -rmmod rxrpc diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt index 50a3e01a36f8..e5177cb31a04 100644 --- a/Documentation/filesystems/autofs4-mount-control.txt +++ b/Documentation/filesystems/autofs4-mount-control.txt @@ -179,6 +179,7 @@ struct autofs_dev_ioctl { * including this struct */ __s32 ioctlfd; /* automount command fd */ + /* Command parameters */ union { struct args_protover protover; struct args_protosubver protosubver; diff --git a/Documentation/filesystems/autofs4.txt b/Documentation/filesystems/autofs4.txt index 8fac3fe7b8c9..f10dd590f69f 100644 --- a/Documentation/filesystems/autofs4.txt +++ b/Documentation/filesystems/autofs4.txt @@ -65,7 +65,7 @@ directory is a mount trap only if the filesystem is mounted *direct* and the root is empty. Directories created in the root directory are mount traps only if the -filesystem is mounted *indirect* and they are empty. +filesystem is mounted *indirect* and they are empty. Directories further down the tree depend on the *maxproto* mount option and particularly whether it is less than five or not. @@ -352,7 +352,7 @@ Communicating with autofs: root directory ioctls ------------------------------------------------ The root directory of an autofs filesystem will respond to a number of -ioctls. The process issuing the ioctl must have the CAP_SYS_ADMIN +ioctls. The process issuing the ioctl must have the CAP_SYS_ADMIN capability, or must be the automount daemon. The available ioctl commands are: @@ -425,8 +425,20 @@ Each ioctl is passed a pointer to an `autofs_dev_ioctl` structure: * including this struct */ __s32 ioctlfd; /* automount command fd */ - __u32 arg1; /* Command parameters */ - __u32 arg2; + /* Command parameters */ + union { + struct args_protover protover; + struct args_protosubver protosubver; + struct args_openmount openmount; + struct args_ready ready; + struct args_fail fail; + struct args_setpipefd setpipefd; + struct args_timeout timeout; + struct args_requester requester; + struct args_expire expire; + struct args_askumount askumount; + struct args_ismountpoint ismountpoint; + }; char path[0]; }; @@ -446,25 +458,22 @@ Commands are: set version numbers. - **AUTOFS_DEV_IOCTL_OPENMOUNT_CMD**: return an open file descriptor on the root of an autofs filesystem. The filesystem is identified - by name and device number, which is stored in `arg1`. Device - numbers for existing filesystems can be found in + by name and device number, which is stored in `openmount.devid`. + Device numbers for existing filesystems can be found in `/proc/self/mountinfo`. - **AUTOFS_DEV_IOCTL_CLOSEMOUNT_CMD**: same as `close(ioctlfd)`. - **AUTOFS_DEV_IOCTL_SETPIPEFD_CMD**: if the filesystem is in catatonic mode, this can provide the write end of a new pipe - in `arg1` to re-establish communication with a daemon. The - process group of the calling process is used to identify the + in `setpipefd.pipefd` to re-establish communication with a daemon. + The process group of the calling process is used to identify the daemon. - **AUTOFS_DEV_IOCTL_REQUESTER_CMD**: `path` should be a name within the filesystem that has been auto-mounted on. - arg1 is the dev number of the underlying autofs. On successful - return, `arg1` and `arg2` will be the UID and GID of the process - which triggered that mount. - + On successful return, `requester.uid` and `requester.gid` will be + the UID and GID of the process which triggered that mount. - **AUTOFS_DEV_IOCTL_ISMOUNTPOINT_CMD**: Check if path is a mountpoint of a particular type - see separate documentation for details. - - **AUTOFS_DEV_IOCTL_PROTOVER_CMD**: - **AUTOFS_DEV_IOCTL_PROTOSUBVER_CMD**: - **AUTOFS_DEV_IOCTL_READY_CMD**: @@ -474,7 +483,7 @@ Commands are: - **AUTOFS_DEV_IOCTL_EXPIRE_CMD**: - **AUTOFS_DEV_IOCTL_ASKUMOUNT_CMD**: These all have the same function as the similarly named **AUTOFS_IOC** ioctls, except - that **FAIL** can be given an explicit error number in `arg1` + that **FAIL** can be given an explicit error number in `fail.status` instead of assuming `ENOENT`, and this **EXPIRE** command corresponds to **AUTOFS_IOC_EXPIRE_MULTI**. @@ -512,7 +521,7 @@ always be mounted "shared". e.g. > `mount --make-shared /autofs/mount/point` -The automount daemon is only able to mange a single mount location for +The automount daemon is only able to manage a single mount location for an autofs filesystem and if mounts on that are not 'shared', other locations will not behave as expected. In particular access to those other locations will likely result in the `ELOOP` error diff --git a/Documentation/filesystems/ceph.txt b/Documentation/filesystems/ceph.txt index f5306ee40ea9..0b302a11718a 100644 --- a/Documentation/filesystems/ceph.txt +++ b/Documentation/filesystems/ceph.txt @@ -98,11 +98,10 @@ Mount Options size. rsize=X - Specify the maximum read size in bytes. By default there is no - maximum. + Specify the maximum read size in bytes. Default: 64 MB. rasize=X - Specify the maximum readahead. + Specify the maximum readahead. Default: 8 MB. mount_timeout=X Specify the timeout value for mount (in seconds), in the case diff --git a/Documentation/filesystems/f2fs.txt b/Documentation/filesystems/f2fs.txt index 753dd4f96afe..4f6531a4701b 100644 --- a/Documentation/filesystems/f2fs.txt +++ b/Documentation/filesystems/f2fs.txt @@ -125,13 +125,14 @@ active_logs=%u Support configuring the number of active logs. In the disable_ext_identify Disable the extension list configured by mkfs, so f2fs does not aware of cold files such as media files. inline_xattr Enable the inline xattrs feature. +noinline_xattr Disable the inline xattrs feature. inline_data Enable the inline data feature: New created small(<~3.4k) files can be written into inode block. inline_dentry Enable the inline dir feature: data in new created directory entries can be written into inode block. The space of inode block which is used to store inline dentries is limited to ~3.4k. -noinline_dentry Diable the inline dentry feature. +noinline_dentry Disable the inline dentry feature. flush_merge Merge concurrent cache_flush commands as much as possible to eliminate redundant command issues. If the underlying device handles the cache_flush command relatively slowly, @@ -157,6 +158,8 @@ data_flush Enable data flushing before checkpoint in order to mode=%s Control block allocation mode which supports "adaptive" and "lfs". In "lfs" mode, there should be no random writes towards main area. +io_bits=%u Set the bit size of write IO requests. It should be set + with "mode=lfs". ================================================================================ DEBUGFS ENTRIES @@ -174,7 +177,7 @@ f2fs. Each file shows the whole f2fs information. SYSFS ENTRIES ================================================================================ -Information about mounted f2f2 file systems can be found in +Information about mounted f2fs file systems can be found in /sys/fs/f2fs. Each mounted filesystem will have a directory in /sys/fs/f2fs based on its device name (i.e., /sys/fs/f2fs/sda). The files in each per-device directory are shown in table below. diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 72624a16b792..c94b4675d021 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -212,10 +212,11 @@ asynchronous manner and the value may not be very precise. To see a precise snapshot of a moment, you can see /proc/<pid>/smaps file and scan page table. It's slow but very precise. -Table 1-2: Contents of the status files (as of 4.1) +Table 1-2: Contents of the status files (as of 4.8) .............................................................................. Field Content Name filename of the executable + Umask file mode creation mask State state (R is running, S is sleeping, D is sleeping in an uninterruptible wait, Z is zombie, T is traced or stopped) @@ -226,7 +227,6 @@ Table 1-2: Contents of the status files (as of 4.1) TracerPid PID of process tracing this process (0 if not) Uid Real, effective, saved set, and file system UIDs Gid Real, effective, saved set, and file system GIDs - Umask file mode creation mask FDSize number of file descriptor slots currently allocated Groups supplementary group list NStgid descendant namespace thread group ID hierarchy @@ -236,6 +236,7 @@ Table 1-2: Contents of the status files (as of 4.1) VmPeak peak virtual memory size VmSize total program size VmLck locked memory size + VmPin pinned memory size VmHWM peak resident set size ("high water mark") VmRSS size of memory portions. It contains the three following parts (VmRSS = RssAnon + RssFile + RssShmem) diff --git a/Documentation/filesystems/quota.txt b/Documentation/filesystems/quota.txt index 29fc01552646..32874b06ebe9 100644 --- a/Documentation/filesystems/quota.txt +++ b/Documentation/filesystems/quota.txt @@ -6,7 +6,7 @@ Quota subsystem allows system administrator to set limits on used space and number of used inodes (inode is a filesystem structure which is associated with each file or directory) for users and/or groups. For both used space and number of used inodes there are actually two limits. The first one is called softlimit -and the second one hardlimit. An user can never exceed a hardlimit for any +and the second one hardlimit. A user can never exceed a hardlimit for any resource (unless he has CAP_SYS_RESOURCE capability). User is allowed to exceed softlimit but only for limited period of time. This period is called "grace period" or "grace time". When grace time is over, user is not able to allocate diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index b968084eeac1..569211703721 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -382,7 +382,8 @@ struct inode_operations { int (*permission) (struct inode *, int); int (*get_acl)(struct inode *, int); int (*setattr) (struct dentry *, struct iattr *); - int (*getattr) (struct vfsmount *mnt, struct dentry *, struct kstat *); + int (*getattr) (const struct path *, struct dentry *, struct kstat *, + u32, unsigned int); ssize_t (*listxattr) (struct dentry *, char *, size_t); void (*update_time)(struct inode *, struct timespec *, int); int (*atomic_open)(struct inode *, struct dentry *, struct file *, diff --git a/Documentation/firmware_class/README b/Documentation/firmware_class/README deleted file mode 100644 index cafdca8b3b15..000000000000 --- a/Documentation/firmware_class/README +++ /dev/null @@ -1,128 +0,0 @@ - - request_firmware() hotplug interface: - ------------------------------------ - Copyright (C) 2003 Manuel Estrada Sainz - - Why: - --- - - Today, the most extended way to use firmware in the Linux kernel is linking - it statically in a header file. Which has political and technical issues: - - 1) Some firmware is not legal to redistribute. - 2) The firmware occupies memory permanently, even though it often is just - used once. - 3) Some people, like the Debian crowd, don't consider some firmware free - enough and remove entire drivers (e.g.: keyspan). - - High level behavior (mixed): - ============================ - - 1), kernel(driver): - - calls request_firmware(&fw_entry, $FIRMWARE, device) - - kernel searches the firmware image with name $FIRMWARE directly - in the below search path of root filesystem: - User customized search path by module parameter 'path'[1] - "/lib/firmware/updates/" UTS_RELEASE, - "/lib/firmware/updates", - "/lib/firmware/" UTS_RELEASE, - "/lib/firmware" - - If found, goto 7), else goto 2) - - [1], the 'path' is a string parameter which length should be less - than 256, user should pass 'firmware_class.path=$CUSTOMIZED_PATH' - if firmware_class is built in kernel(the general situation) - - 2), userspace: - - /sys/class/firmware/xxx/{loading,data} appear. - - hotplug gets called with a firmware identifier in $FIRMWARE - and the usual hotplug environment. - - hotplug: echo 1 > /sys/class/firmware/xxx/loading - - 3), kernel: Discard any previous partial load. - - 4), userspace: - - hotplug: cat appropriate_firmware_image > \ - /sys/class/firmware/xxx/data - - 5), kernel: grows a buffer in PAGE_SIZE increments to hold the image as it - comes in. - - 6), userspace: - - hotplug: echo 0 > /sys/class/firmware/xxx/loading - - 7), kernel: request_firmware() returns and the driver has the firmware - image in fw_entry->{data,size}. If something went wrong - request_firmware() returns non-zero and fw_entry is set to - NULL. - - 8), kernel(driver): Driver code calls release_firmware(fw_entry) releasing - the firmware image and any related resource. - - High level behavior (driver code): - ================================== - - if(request_firmware(&fw_entry, $FIRMWARE, device) == 0) - copy_fw_to_device(fw_entry->data, fw_entry->size); - release_firmware(fw_entry); - - Sample/simple hotplug script: - ============================ - - # Both $DEVPATH and $FIRMWARE are already provided in the environment. - - HOTPLUG_FW_DIR=/usr/lib/hotplug/firmware/ - - echo 1 > /sys/$DEVPATH/loading - cat $HOTPLUG_FW_DIR/$FIRMWARE > /sys/$DEVPATH/data - echo 0 > /sys/$DEVPATH/loading - - Random notes: - ============ - - - "echo -1 > /sys/class/firmware/xxx/loading" will cancel the load at - once and make request_firmware() return with error. - - - firmware_data_read() and firmware_loading_show() are just provided - for testing and completeness, they are not called in normal use. - - - There is also /sys/class/firmware/timeout which holds a timeout in - seconds for the whole load operation. - - - request_firmware_nowait() is also provided for convenience in - user contexts to request firmware asynchronously, but can't be called - in atomic contexts. - - - about in-kernel persistence: - --------------------------- - Under some circumstances, as explained below, it would be interesting to keep - firmware images in non-swappable kernel memory or even in the kernel image - (probably within initramfs). - - Note that this functionality has not been implemented. - - - Why OPTIONAL in-kernel persistence may be a good idea sometimes: - - - If the device that needs the firmware is needed to access the - filesystem. When upon some error the device has to be reset and the - firmware reloaded, it won't be possible to get it from userspace. - e.g.: - - A diskless client with a network card that needs firmware. - - The filesystem is stored in a disk behind an scsi device - that needs firmware. - - Replacing buggy DSDT/SSDT ACPI tables on boot. - Note: this would require the persistent objects to be included - within the kernel image, probably within initramfs. - - And the same device can be needed to access the filesystem or not depending - on the setup, so I think that the choice on what firmware to make - persistent should be left to userspace. - - about firmware cache: - -------------------- - After firmware cache mechanism is introduced during system sleep, - request_firmware can be called safely inside device's suspend and - resume callback, and callers needn't cache the firmware by - themselves any more for dealing with firmware loss during system - resume. diff --git a/Documentation/fpga/fpga-mgr.txt b/Documentation/fpga/fpga-mgr.txt index 86ee5078fd03..78f197fadfd1 100644 --- a/Documentation/fpga/fpga-mgr.txt +++ b/Documentation/fpga/fpga-mgr.txt @@ -22,7 +22,16 @@ To program the FPGA from a file or from a buffer: struct fpga_image_info *info, const char *buf, size_t count); -Load the FPGA from an image which exists as a buffer in memory. +Load the FPGA from an image which exists as a contiguous buffer in +memory. Allocating contiguous kernel memory for the buffer should be avoided, +users are encouraged to use the _sg interface instead of this. + + int fpga_mgr_buf_load_sg(struct fpga_manager *mgr, + struct fpga_image_info *info, + struct sg_table *sgt); + +Load the FPGA from an image from non-contiguous in memory. Callers can +construct a sg_table using alloc_page backed memory. int fpga_mgr_firmware_load(struct fpga_manager *mgr, struct fpga_image_info *info, @@ -166,7 +175,7 @@ success or negative error codes otherwise. The programming sequence is: 1. .write_init - 2. .write (may be called once or multiple times) + 2. .write or .write_sg (may be called once or multiple times) 3. .write_complete The .write_init function will prepare the FPGA to receive the image data. The @@ -176,7 +185,11 @@ buffer up at least this much before starting. The .write function writes a buffer to the FPGA. The buffer may be contain the whole FPGA image or may be a smaller chunk of an FPGA image. In the latter -case, this function is called multiple times for successive chunks. +case, this function is called multiple times for successive chunks. This interface +is suitable for drivers which use PIO. + +The .write_sg version behaves the same as .write except the input is a sg_table +scatter list. This interface is suitable for drivers which use DMA. The .write_complete function is called after all the image has been written to put the FPGA into operating mode. diff --git a/Documentation/gpio/driver.txt b/Documentation/gpio/driver.txt index 747c721776ed..fc1d2f83564d 100644 --- a/Documentation/gpio/driver.txt +++ b/Documentation/gpio/driver.txt @@ -41,34 +41,71 @@ In the gpiolib framework each GPIO controller is packaged as a "struct gpio_chip" (see linux/gpio/driver.h for its complete definition) with members common to each controller of that type: - - methods to establish GPIO direction - - methods used to access GPIO values - - method to return the IRQ number associated to a given GPIO + - methods to establish GPIO line direction + - methods used to access GPIO line values + - method to set electrical configuration to a a given GPIO line + - method to return the IRQ number associated to a given GPIO line - flag saying whether calls to its methods may sleep + - optional line names array to identify lines - optional debugfs dump method (showing extra state like pullup config) - optional base number (will be automatically assigned if omitted) - - label for diagnostics and GPIOs mapping using platform data + - optional label for diagnostics and GPIO chip mapping using platform data The code implementing a gpio_chip should support multiple instances of the controller, possibly using the driver model. That code will configure each -gpio_chip and issue gpiochip_add(). Removing a GPIO controller should be rare; -use gpiochip_remove() when it is unavoidable. +gpio_chip and issue gpiochip_add[_data]() or devm_gpiochip_add_data(). +Removing a GPIO controller should be rare; use [devm_]gpiochip_remove() when +it is unavoidable. -Most often a gpio_chip is part of an instance-specific structure with state not +Often a gpio_chip is part of an instance-specific structure with states not exposed by the GPIO interfaces, such as addressing, power management, and more. -Chips such as codecs will have complex non-GPIO state. +Chips such as audio codecs will have complex non-GPIO states. Any debugfs dump method should normally ignore signals which haven't been requested as GPIOs. They can use gpiochip_is_requested(), which returns either NULL or the label associated with that GPIO when it was requested. -RT_FULL: GPIO driver should not use spinlock_t or any sleepable APIs +RT_FULL: the GPIO driver should not use spinlock_t or any sleepable APIs (like PM runtime) in its gpio_chip implementation (.get/.set and direction control callbacks) if it is expected to call GPIO APIs from atomic context on -RT (inside hard IRQ handlers and similar contexts). Normally this should not be required. +GPIO electrical configuration +----------------------------- + +GPIOs can be configured for several electrical modes of operation by using the +.set_config() callback. Currently this API supports setting debouncing and +single-ended modes (open drain/open source). These settings are described +below. + +The .set_config() callback uses the same enumerators and configuration +semantics as the generic pin control drivers. This is not a coincidence: it is +possible to assign the .set_config() to the function gpiochip_generic_config() +which will result in pinctrl_gpio_set_config() being called and eventually +ending up in the pin control back-end "behind" the GPIO controller, usually +closer to the actual pins. This way the pin controller can manage the below +listed GPIO configurations. + + +GPIOs with debounce support +--------------------------- + +Debouncing is a configuration set to a pin indicating that it is connected to +a mechanical switch or button, or similar that may bounce. Bouncing means the +line is pulled high/low quickly at very short intervals for mechanical +reasons. This can result in the value being unstable or irqs fireing repeatedly +unless the line is debounced. + +Debouncing in practice involves setting up a timer when something happens on +the line, wait a little while and then sample the line again, so see if it +still has the same value (low or high). This could also be repeated by a clever +state machine, waiting for a line to become stable. In either case, it sets +a certain number of milliseconds for debouncing, or just "on/off" if that time +is not configurable. + + GPIOs with open drain/source support ------------------------------------ @@ -146,10 +183,11 @@ a pull-up resistor is needed on the outgoing rail to complete the circuit, and in the second case, a pull-down resistor is needed on the rail. Hardware that supports open drain or open source or both, can implement a -special callback in the gpio_chip: .set_single_ended() that takes an enum flag -telling whether to configure the line as open drain, open source or push-pull. -This will happen in response to the GPIO_OPEN_DRAIN or GPIO_OPEN_SOURCE flag -set in the machine file, or coming from other hardware descriptions. +special callback in the gpio_chip: .set_config() that takes a generic +pinconf packed value telling whether to configure the line as open drain, +open source or push-pull. This will happen in response to the +GPIO_OPEN_DRAIN or GPIO_OPEN_SOURCE flag set in the machine file, or coming +from other hardware descriptions. If this state can not be configured in hardware, i.e. if the GPIO hardware does not support open drain/open source in hardware, the GPIO library will instead diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst index 0c9abdc0ee31..4d4068855ec4 100644 --- a/Documentation/gpu/drm-kms.rst +++ b/Documentation/gpu/drm-kms.rst @@ -48,11 +48,17 @@ CRTC Abstraction ================ .. kernel-doc:: drivers/gpu/drm/drm_crtc.c - :export: + :doc: overview + +CRTC Functions Reference +-------------------------------- .. kernel-doc:: include/drm/drm_crtc.h :internal: +.. kernel-doc:: drivers/gpu/drm/drm_crtc.c + :export: + Frame Buffer Abstraction ======================== diff --git a/Documentation/gpu/drm-mm.rst b/Documentation/gpu/drm-mm.rst index cb5daffcd6be..f5760b140f13 100644 --- a/Documentation/gpu/drm-mm.rst +++ b/Documentation/gpu/drm-mm.rst @@ -34,25 +34,26 @@ TTM initialization ------------------ **Warning** - This section is outdated. -Drivers wishing to support TTM must fill out a drm_bo_driver -structure. The structure contains several fields with function pointers -for initializing the TTM, allocating and freeing memory, waiting for -command completion and fence synchronization, and memory migration. See -the radeon_ttm.c file for an example of usage. +Drivers wishing to support TTM must pass a filled :c:type:`ttm_bo_driver +<ttm_bo_driver>` structure to ttm_bo_device_init, together with an +initialized global reference to the memory manager. The ttm_bo_driver +structure contains several fields with function pointers for +initializing the TTM, allocating and freeing memory, waiting for command +completion and fence synchronization, and memory migration. -The ttm_global_reference structure is made up of several fields: +The :c:type:`struct drm_global_reference <drm_global_reference>` is made +up of several fields: .. code-block:: c - struct ttm_global_reference { + struct drm_global_reference { enum ttm_global_types global_type; size_t size; void *object; - int (*init) (struct ttm_global_reference *); - void (*release) (struct ttm_global_reference *); + int (*init) (struct drm_global_reference *); + void (*release) (struct drm_global_reference *); }; @@ -76,6 +77,12 @@ ttm_bo_global_release(), respectively. Also, like the previous object, ttm_global_item_ref() is used to create an initial reference count for the TTM, which will call your initialization function. +See the radeon_ttm.c file for an example of usage. + +.. kernel-doc:: drivers/gpu/drm/drm_global.c + :export: + + The Graphics Execution Manager (GEM) ==================================== @@ -284,10 +291,17 @@ To use :c:func:`drm_gem_mmap()`, drivers must fill the struct :c:type:`struct drm_driver <drm_driver>` gem_vm_ops field with a pointer to VM operations. -struct vm_operations_struct \*gem_vm_ops struct -vm_operations_struct { void (\*open)(struct vm_area_struct \* area); -void (\*close)(struct vm_area_struct \* area); int (\*fault)(struct -vm_area_struct \*vma, struct vm_fault \*vmf); }; +The VM operations is a :c:type:`struct vm_operations_struct <vm_operations_struct>` +made up of several fields, the more interesting ones being: + +.. code-block:: c + + struct vm_operations_struct { + void (*open)(struct vm_area_struct * area); + void (*close)(struct vm_area_struct * area); + int (*fault)(struct vm_fault *vmf); + }; + The open and close operations must update the GEM object reference count. Drivers can use the :c:func:`drm_gem_vm_open()` and @@ -303,6 +317,17 @@ created. Drivers that want to map the GEM object upfront instead of handling page faults can implement their own mmap file operation handler. +For platforms without MMU the GEM core provides a helper method +:c:func:`drm_gem_cma_get_unmapped_area`. The mmap() routines will call +this to get a proposed address for the mapping. + +To use :c:func:`drm_gem_cma_get_unmapped_area`, drivers must fill the +struct :c:type:`struct file_operations <file_operations>` get_unmapped_area +field with a pointer on :c:func:`drm_gem_cma_get_unmapped_area`. + +More detailed information about get_unmapped_area can be found in +Documentation/nommu-mmap.txt + Memory Coherency ---------------- @@ -442,7 +467,7 @@ LRU Scan/Eviction Support ------------------------- .. kernel-doc:: drivers/gpu/drm/drm_mm.c - :doc: lru scan roaster + :doc: lru scan roster DRM MM Range Allocator Function References ------------------------------------------ @@ -452,3 +477,9 @@ DRM MM Range Allocator Function References .. kernel-doc:: include/drm/drm_mm.h :internal: + +DRM Cache Handling +================== + +.. kernel-doc:: drivers/gpu/drm/drm_cache.c + :export: diff --git a/Documentation/gpu/drm-uapi.rst b/Documentation/gpu/drm-uapi.rst index de3ac9f90f8f..fcc228ef5bc4 100644 --- a/Documentation/gpu/drm-uapi.rst +++ b/Documentation/gpu/drm-uapi.rst @@ -156,8 +156,12 @@ other hand, a driver requires shared state between clients which is visible to user-space and accessible beyond open-file boundaries, they cannot support render nodes. + +Testing and validation +====================== + Validating changes with IGT -=========================== +--------------------------- There's a collection of tests that aims to cover the whole functionality of DRM drivers and that can be used to check that changes to DRM drivers or the @@ -193,6 +197,12 @@ run-tests.sh is a wrapper around piglit that will execute the tests matching the -t options. A report in HTML format will be available in ./results/html/index.html. Results can be compared with piglit. +Display CRC Support +------------------- + +.. kernel-doc:: drivers/gpu/drm/drm_debugfs_crc.c + :doc: CRC ABI + VBlank event handling ===================== @@ -209,16 +219,3 @@ DRM_IOCTL_MODESET_CTL mode setting, since on many devices the vertical blank counter is reset to 0 at some point during modeset. Modern drivers should not call this any more since with kernel mode setting it is a no-op. - -This second part of the GPU Driver Developer's Guide documents driver -code, implementation details and also all the driver-specific userspace -interfaces. Especially since all hardware-acceleration interfaces to -userspace are driver specific for efficiency and other reasons these -interfaces can be rather substantial. Hence every driver has its own -chapter. - -Testing and validation -====================== - -.. kernel-doc:: drivers/gpu/drm/drm_debugfs_crc.c - :doc: CRC ABI diff --git a/Documentation/gpu/i915.rst b/Documentation/gpu/i915.rst index 117d2ab7a5f7..b0d6709b8600 100644 --- a/Documentation/gpu/i915.rst +++ b/Documentation/gpu/i915.rst @@ -144,6 +144,15 @@ High Definition Audio .. kernel-doc:: include/drm/i915_component.h :internal: +Intel HDMI LPE Audio Support +---------------------------- + +.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c + :doc: LPE Audio integration for HDMI or DP playback + +.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c + :internal: + Panel Self Refresh PSR (PSR/SRD) -------------------------------- @@ -213,6 +222,18 @@ Video BIOS Table (VBT) .. kernel-doc:: drivers/gpu/drm/i915/intel_vbt_defs.h :internal: +Display PLLs +------------ + +.. kernel-doc:: drivers/gpu/drm/i915/intel_dpll_mgr.c + :doc: Display PLLs + +.. kernel-doc:: drivers/gpu/drm/i915/intel_dpll_mgr.c + :internal: + +.. kernel-doc:: drivers/gpu/drm/i915/intel_dpll_mgr.h + :internal: + Memory Management and Command Submission ======================================== @@ -356,4 +377,95 @@ switch_mm .. kernel-doc:: drivers/gpu/drm/i915/i915_trace.h :doc: switch_mm tracepoint +Perf +==== + +Overview +-------- +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :doc: i915 Perf Overview + +Comparison with Core Perf +------------------------- +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :doc: i915 Perf History and Comparison with Core Perf + +i915 Driver Entry Points +------------------------ + +This section covers the entrypoints exported outside of i915_perf.c to +integrate with drm/i915 and to handle the `DRM_I915_PERF_OPEN` ioctl. + +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_init +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_fini +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_register +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_unregister +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_open_ioctl +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_release + +i915 Perf Stream +---------------- + +This section covers the stream-semantics-agnostic structures and functions +for representing an i915 perf stream FD and associated file operations. + +.. kernel-doc:: drivers/gpu/drm/i915/i915_drv.h + :functions: i915_perf_stream +.. kernel-doc:: drivers/gpu/drm/i915/i915_drv.h + :functions: i915_perf_stream_ops + +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: read_properties_unlocked +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_open_ioctl_locked +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_destroy_locked +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_read +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_ioctl +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_enable_locked +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_disable_locked +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_poll +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_poll_locked + +i915 Perf Observation Architecture Stream +----------------------------------------- + +.. kernel-doc:: drivers/gpu/drm/i915/i915_drv.h + :functions: i915_oa_ops + +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_oa_stream_init +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_oa_read +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_oa_stream_enable +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_oa_stream_disable +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_oa_wait_unlocked +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_oa_poll_wait + +All i915 Perf Internals +----------------------- + +This section simply includes all currently documented i915 perf internals, in +no particular order, but may include some more minor utilities or platform +specific details than found in the more high-level sections. + +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :internal: + .. WARNING: DOCPROC directive not supported: !Cdrivers/gpu/drm/i915/i915_irq.c diff --git a/Documentation/gpu/index.rst b/Documentation/gpu/index.rst index 367d7c36b8e9..f81278a7c2cc 100644 --- a/Documentation/gpu/index.rst +++ b/Documentation/gpu/index.rst @@ -11,6 +11,7 @@ Linux GPU Driver Developer's Guide drm-kms-helpers drm-uapi i915 + tinydrm vga-switcheroo vgaarbiter diff --git a/Documentation/gpu/introduction.rst b/Documentation/gpu/introduction.rst index 1903595b5310..eb284eb748ba 100644 --- a/Documentation/gpu/introduction.rst +++ b/Documentation/gpu/introduction.rst @@ -23,13 +23,12 @@ For consistency this documentation uses American English. Abbreviations are written as all-uppercase, for example: DRM, KMS, IOCTL, CRTC, and so on. To aid in reading, documentations make full use of the markup characters kerneldoc provides: @parameter for function parameters, -@member for structure members, &structure to reference structures and -function() for functions. These all get automatically hyperlinked if -kerneldoc for the referenced objects exists. When referencing entries in -function vtables please use ->vfunc(). Note that kerneldoc does not -support referencing struct members directly, so please add a reference -to the vtable struct somewhere in the same paragraph or at least -section. +@member for structure members (within the same structure), &struct structure to +reference structures and function() for functions. These all get automatically +hyperlinked if kerneldoc for the referenced objects exists. When referencing +entries in function vtables (and structure members in general) please use +&vtable_name.vfunc. Unfortunately this does not yet yield a direct link to the +member, only the structure. Except in special situations (to separate locked from unlocked variants) locking requirements for functions aren't documented in the kerneldoc. @@ -49,3 +48,5 @@ section name should be all upper-case or not, and whether it should end in a colon or not. Go with the file-local style. Other common section names are "Notes" with information for dangerous or tricky corner cases, and "FIXME" where the interface could be cleaned up. + +Also read the :ref:`guidelines for the kernel documentation at large <doc_guide>`. diff --git a/Documentation/gpu/tinydrm.rst b/Documentation/gpu/tinydrm.rst new file mode 100644 index 000000000000..a913644bfc19 --- /dev/null +++ b/Documentation/gpu/tinydrm.rst @@ -0,0 +1,42 @@ +========================== +drm/tinydrm Driver library +========================== + +.. kernel-doc:: drivers/gpu/drm/tinydrm/core/tinydrm-core.c + :doc: overview + +Core functionality +================== + +.. kernel-doc:: drivers/gpu/drm/tinydrm/core/tinydrm-core.c + :doc: core + +.. kernel-doc:: include/drm/tinydrm/tinydrm.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/tinydrm/core/tinydrm-core.c + :export: + +.. kernel-doc:: drivers/gpu/drm/tinydrm/core/tinydrm-pipe.c + :export: + +Additional helpers +================== + +.. kernel-doc:: include/drm/tinydrm/tinydrm-helpers.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/tinydrm/core/tinydrm-helpers.c + :export: + +MIPI DBI Compatible Controllers +=============================== + +.. kernel-doc:: drivers/gpu/drm/tinydrm/mipi-dbi.c + :doc: overview + +.. kernel-doc:: include/drm/tinydrm/mipi-dbi.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/tinydrm/mipi-dbi.c + :export: diff --git a/Documentation/hwmon/hwmon-kernel-api.txt b/Documentation/hwmon/hwmon-kernel-api.txt index 2505ae67e2b6..53a806696c64 100644 --- a/Documentation/hwmon/hwmon-kernel-api.txt +++ b/Documentation/hwmon/hwmon-kernel-api.txt @@ -89,6 +89,10 @@ the call to devm_hwmon_device_register_with_groups or hwmon_device_register_with_info and if the automatic (device managed) removal would be too late. +All supported hwmon device registration functions only accept valid device +names. Device names including invalid characters (whitespace, '*', or '-') +will be rejected. The 'name' parameter is mandatory. + Using devm_hwmon_device_register_with_info() -------------------------------------------- diff --git a/Documentation/hwmon/lm70 b/Documentation/hwmon/lm70 index 1bb2db440671..c3a1f2ea017d 100644 --- a/Documentation/hwmon/lm70 +++ b/Documentation/hwmon/lm70 @@ -6,6 +6,8 @@ Supported chips: Datasheet: http://www.national.com/pf/LM/LM70.html * Texas Instruments TMP121/TMP123 Information: http://focus.ti.com/docs/prod/folders/print/tmp121.html + * Texas Instruments TMP122/TMP124 + Information: http://www.ti.com/product/tmp122 * National Semiconductor LM71 Datasheet: http://www.ti.com/product/LM71 * National Semiconductor LM74 @@ -35,8 +37,10 @@ As a real (in-tree) example of this "SPI protocol driver" interfacing with a "SPI master controller driver", see drivers/spi/spi_lm70llp.c and its associated documentation. -The LM74 and TMP121/TMP123 are very similar; main difference is 13-bit -temperature data (0.0625 degrees celsius resolution). +The LM74 and TMP121/TMP122/TMP123/TMP124 are very similar; main difference is +13-bit temperature data (0.0625 degrees celsius resolution). + +The TMP122/TMP124 also feature configurable temperature thresholds. The LM71 is also very similar; main difference is 14-bit temperature data (0.03125 degrees celsius resolution). diff --git a/Documentation/hwmon/sht21 b/Documentation/hwmon/sht21 index db17fda45c3e..47f4765db256 100644 --- a/Documentation/hwmon/sht21 +++ b/Documentation/hwmon/sht21 @@ -35,6 +35,7 @@ sysfs-Interface temp1_input - temperature input humidity1_input - humidity input +eic - Electronic Identification Code Notes ----- @@ -45,5 +46,5 @@ humidity and 66 ms for temperature. To keep self heating below 0.1 degree Celsius, the device should not be active for more than 10% of the time, e.g. maximum two measurements per second at the given resolution. -Different resolutions, the on-chip heater, using the CRC checksum and reading -the serial number are not supported yet. +Different resolutions, the on-chip heater, and using the CRC checksum +are not supported yet. diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index 2cc95ad46604..fc337c317c67 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -86,8 +86,9 @@ given driver if the chip has the feature. name The chip name. This should be a short, lowercase string, not containing - spaces nor dashes, representing the chip name. This is - the only mandatory attribute. + whitespace, dashes, or the wildcard character '*'. + This attribute represents the chip name. It is the only + mandatory attribute. I2C devices get this attribute created automatically. RO diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index 1bba38dd2637..820d9040de16 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -33,6 +33,7 @@ Supported adapters: * Intel DNV (SOC) * Intel Broxton (SOC) * Intel Lewisburg (PCH) + * Intel Gemini Lake (SOC) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBus controller diff --git a/Documentation/i2c/muxes/i2c-mux-gpio b/Documentation/i2c/muxes/i2c-mux-gpio index d4d91a53fc39..7a8d7d261632 100644 --- a/Documentation/i2c/muxes/i2c-mux-gpio +++ b/Documentation/i2c/muxes/i2c-mux-gpio @@ -1,11 +1,11 @@ -Kernel driver i2c-gpio-mux +Kernel driver i2c-mux-gpio Author: Peter Korsgaard <peter.korsgaard@barco.com> Description ----------- -i2c-gpio-mux is an i2c mux driver providing access to I2C bus segments +i2c-mux-gpio is an i2c mux driver providing access to I2C bus segments from a master I2C bus and a hardware MUX controlled through GPIO pins. E.G.: @@ -26,16 +26,16 @@ according to the settings of the GPIO pins 1..N. Usage ----- -i2c-gpio-mux uses the platform bus, so you need to provide a struct +i2c-mux-gpio uses the platform bus, so you need to provide a struct platform_device with the platform_data pointing to a struct -gpio_i2cmux_platform_data with the I2C adapter number of the master +i2c_mux_gpio_platform_data with the I2C adapter number of the master bus, the number of bus segments to create and the GPIO pins used -to control it. See include/linux/i2c-gpio-mux.h for details. +to control it. See include/linux/i2c-mux-gpio.h for details. E.G. something like this for a MUX providing 4 bus segments controlled through 3 GPIO pins: -#include <linux/i2c-gpio-mux.h> +#include <linux/i2c-mux-gpio.h> #include <linux/platform_device.h> static const unsigned myboard_gpiomux_gpios[] = { @@ -46,7 +46,7 @@ static const unsigned myboard_gpiomux_values[] = { 0, 1, 2, 3 }; -static struct gpio_i2cmux_platform_data myboard_i2cmux_data = { +static struct i2c_mux_gpio_platform_data myboard_i2cmux_data = { .parent = 1, .base_nr = 2, /* optional */ .values = myboard_gpiomux_values, @@ -57,7 +57,7 @@ static struct gpio_i2cmux_platform_data myboard_i2cmux_data = { }; static struct platform_device myboard_i2cmux = { - .name = "i2c-gpio-mux", + .name = "i2c-mux-gpio", .id = 0, .dev = { .platform_data = &myboard_i2cmux_data, @@ -66,14 +66,14 @@ static struct platform_device myboard_i2cmux = { If you don't know the absolute GPIO pin numbers at registration time, you can instead provide a chip name (.chip_name) and relative GPIO pin -numbers, and the i2c-gpio-mux driver will do the work for you, +numbers, and the i2c-mux-gpio driver will do the work for you, including deferred probing if the GPIO chip isn't immediately available. Device Registration ------------------- -When registering your i2c-gpio-mux device, you should pass the number +When registering your i2c-mux-gpio device, you should pass the number of any GPIO pin it uses as the device ID. This guarantees that every instance has a different ID. diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 81c7f2bb7daf..08244bea5048 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -321,6 +321,7 @@ Code Seq#(hex) Include File Comments 0xB1 00-1F PPPoX <mailto:mostrows@styx.uwaterloo.ca> 0xB3 00 linux/mmc/ioctl.h 0xB4 00-0F linux/gpio.h <mailto:linux-gpio@vger.kernel.org> +0xB5 00-0F uapi/linux/rpmsg.h <mailto:linux-remoteproc@vger.kernel.org> 0xC0 00-0F linux/usb/iowarrior.h 0xCA 00-0F uapi/misc/cxl.h 0xCA 80-8F uapi/scsi/cxlflash_ioctl.h diff --git a/Documentation/kselftest.txt b/Documentation/kselftest.txt index e5c7254e73d7..5bd590335839 100644 --- a/Documentation/kselftest.txt +++ b/Documentation/kselftest.txt @@ -59,14 +59,14 @@ Install selftests ================= You can use kselftest_install.sh tool installs selftests in default -location which is tools/testing/selftests/kselftest or an user specified +location which is tools/testing/selftests/kselftest or a user specified location. To install selftests in default location: $ cd tools/testing/selftests $ ./kselftest_install.sh -To install selftests in an user specified location: +To install selftests in a user specified location: $ cd tools/testing/selftests $ ./kselftest_install.sh install_dir @@ -95,3 +95,15 @@ In general, the rules for selftests are * Don't cause the top-level "make run_tests" to fail if your feature is unconfigured. + +Contributing new tests(details) +=============================== + + * Use TEST_GEN_XXX if such binaries or files are generated during + compiling. + TEST_PROGS, TEST_GEN_PROGS mean it is the excutable tested by + default. + TEST_PROGS_EXTENDED, TEST_GEN_PROGS_EXTENDED mean it is the + executable which is not tested by default. + TEST_FILES, TEST_GEN_FILES mean it is the file which is used by + test. diff --git a/Documentation/leds/leds-class.txt b/Documentation/leds/leds-class.txt index f1f7ec9f5cc5..836cb16d6f09 100644 --- a/Documentation/leds/leds-class.txt +++ b/Documentation/leds/leds-class.txt @@ -65,6 +65,21 @@ LED subsystem core exposes following API for setting brightness: blinking, returns -EBUSY if software blink fallback is enabled. +LED registration API +==================== + +A driver wanting to register a LED classdev for use by other drivers / +userspace needs to allocate and fill a led_classdev struct and then call +[devm_]led_classdev_register. If the non devm version is used the driver +must call led_classdev_unregister from its remove function before +free-ing the led_classdev struct. + +If the driver can detect hardware initiated brightness changes and thus +wants to have a brightness_hw_changed attribute then the LED_BRIGHT_HW_CHANGED +flag must be set in flags before registering. Calling +led_classdev_notify_brightness_hw_changed on a classdev not registered with +the LED_BRIGHT_HW_CHANGED flag is a bug and will trigger a WARN_ON. + Hardware accelerated blink of LEDs ================================== diff --git a/Documentation/livepatch/livepatch.txt b/Documentation/livepatch/livepatch.txt index cbfabd188779..9d2096c7160d 100644 --- a/Documentation/livepatch/livepatch.txt +++ b/Documentation/livepatch/livepatch.txt @@ -329,25 +329,6 @@ The current Livepatch implementation has several limitations: by "notrace". - + Anything inlined into __schedule() can not be patched. - - The switch_to macro is inlined into __schedule(). It switches the - context between two processes in the middle of the macro. It does - not save RIP in x86_64 version (contrary to 32-bit version). Instead, - the currently used __schedule()/switch_to() handles both processes. - - Now, let's have two different tasks. One calls the original - __schedule(), its registers are stored in a defined order and it - goes to sleep in the switch_to macro and some other task is restored - using the original __schedule(). Then there is the second task which - calls patched__schedule(), it goes to sleep there and the first task - is picked by the patched__schedule(). Its RSP is restored and now - the registers should be restored as well. But the order is different - in the new patched__schedule(), so... - - There is work in progress to remove this limitation. - - + Livepatch modules can not be removed. The current implementation just redirects the functions at the very diff --git a/Documentation/locking/ww-mutex-design.txt b/Documentation/locking/ww-mutex-design.txt index 8a112dc304c3..34c3a1b50b9a 100644 --- a/Documentation/locking/ww-mutex-design.txt +++ b/Documentation/locking/ww-mutex-design.txt @@ -309,11 +309,15 @@ Design: normal mutex locks, which are far more common. As such there is only a small increase in code size if wait/wound mutexes are not used. + We maintain the following invariants for the wait list: + (1) Waiters with an acquire context are sorted by stamp order; waiters + without an acquire context are interspersed in FIFO order. + (2) Among waiters with contexts, only the first one can have other locks + acquired already (ctx->acquired > 0). Note that this waiter may come + after other waiters without contexts in the list. + In general, not much contention is expected. The locks are typically used to - serialize access to resources for devices. The only way to make wakeups - smarter would be at the cost of adding a field to struct mutex_waiter. This - would add overhead to all cases where normal mutexes are used, and - ww_mutexes are generally less performance sensitive. + serialize access to resources for devices. Lockdep: Special care has been taken to warn for as many cases of api abuse diff --git a/Documentation/md-cluster.txt b/Documentation/md/md-cluster.txt index 38883276d31c..38883276d31c 100644 --- a/Documentation/md-cluster.txt +++ b/Documentation/md/md-cluster.txt diff --git a/Documentation/md/raid5-cache.txt b/Documentation/md/raid5-cache.txt new file mode 100644 index 000000000000..2b210f295786 --- /dev/null +++ b/Documentation/md/raid5-cache.txt @@ -0,0 +1,109 @@ +RAID5 cache + +Raid 4/5/6 could include an extra disk for data cache besides normal RAID +disks. The role of RAID disks isn't changed with the cache disk. The cache disk +caches data to the RAID disks. The cache can be in write-through (supported +since 4.4) or write-back mode (supported since 4.10). mdadm (supported since +3.4) has a new option '--write-journal' to create array with cache. Please +refer to mdadm manual for details. By default (RAID array starts), the cache is +in write-through mode. A user can switch it to write-back mode by: + +echo "write-back" > /sys/block/md0/md/journal_mode + +And switch it back to write-through mode by: + +echo "write-through" > /sys/block/md0/md/journal_mode + +In both modes, all writes to the array will hit cache disk first. This means +the cache disk must be fast and sustainable. + +------------------------------------- +write-through mode: + +This mode mainly fixes the 'write hole' issue. For RAID 4/5/6 array, an unclean +shutdown can cause data in some stripes to not be in consistent state, eg, data +and parity don't match. The reason is that a stripe write involves several RAID +disks and it's possible the writes don't hit all RAID disks yet before the +unclean shutdown. We call an array degraded if it has inconsistent data. MD +tries to resync the array to bring it back to normal state. But before the +resync completes, any system crash will expose the chance of real data +corruption in the RAID array. This problem is called 'write hole'. + +The write-through cache will cache all data on cache disk first. After the data +is safe on the cache disk, the data will be flushed onto RAID disks. The +two-step write will guarantee MD can recover correct data after unclean +shutdown even the array is degraded. Thus the cache can close the 'write hole'. + +In write-through mode, MD reports IO completion to upper layer (usually +filesystems) after the data is safe on RAID disks, so cache disk failure +doesn't cause data loss. Of course cache disk failure means the array is +exposed to 'write hole' again. + +In write-through mode, the cache disk isn't required to be big. Several +hundreds megabytes are enough. + +-------------------------------------- +write-back mode: + +write-back mode fixes the 'write hole' issue too, since all write data is +cached on cache disk. But the main goal of 'write-back' cache is to speed up +write. If a write crosses all RAID disks of a stripe, we call it full-stripe +write. For non-full-stripe writes, MD must read old data before the new parity +can be calculated. These synchronous reads hurt write throughput. Some writes +which are sequential but not dispatched in the same time will suffer from this +overhead too. Write-back cache will aggregate the data and flush the data to +RAID disks only after the data becomes a full stripe write. This will +completely avoid the overhead, so it's very helpful for some workloads. A +typical workload which does sequential write followed by fsync is an example. + +In write-back mode, MD reports IO completion to upper layer (usually +filesystems) right after the data hits cache disk. The data is flushed to raid +disks later after specific conditions met. So cache disk failure will cause +data loss. + +In write-back mode, MD also caches data in memory. The memory cache includes +the same data stored on cache disk, so a power loss doesn't cause data loss. +The memory cache size has performance impact for the array. It's recommended +the size is big. A user can configure the size by: + +echo "2048" > /sys/block/md0/md/stripe_cache_size + +Too small cache disk will make the write aggregation less efficient in this +mode depending on the workloads. It's recommended to use a cache disk with at +least several gigabytes size in write-back mode. + +-------------------------------------- +The implementation: + +The write-through and write-back cache use the same disk format. The cache disk +is organized as a simple write log. The log consists of 'meta data' and 'data' +pairs. The meta data describes the data. It also includes checksum and sequence +ID for recovery identification. Data can be IO data and parity data. Data is +checksumed too. The checksum is stored in the meta data ahead of the data. The +checksum is an optimization because MD can write meta and data freely without +worry about the order. MD superblock has a field pointed to the valid meta data +of log head. + +The log implementation is pretty straightforward. The difficult part is the +order in which MD writes data to cache disk and RAID disks. Specifically, in +write-through mode, MD calculates parity for IO data, writes both IO data and +parity to the log, writes the data and parity to RAID disks after the data and +parity is settled down in log and finally the IO is finished. Read just reads +from raid disks as usual. + +In write-back mode, MD writes IO data to the log and reports IO completion. The +data is also fully cached in memory at that time, which means read must query +memory cache. If some conditions are met, MD will flush the data to RAID disks. +MD will calculate parity for the data and write parity into the log. After this +is finished, MD will write both data and parity into RAID disks, then MD can +release the memory cache. The flush conditions could be stripe becomes a full +stripe write, free cache disk space is low or free in-kernel memory cache space +is low. + +After an unclean shutdown, MD does recovery. MD reads all meta data and data +from the log. The sequence ID and checksum will help us detect corrupted meta +data and data. If MD finds a stripe with data and valid parities (1 parity for +raid4/5 and 2 for raid6), MD will write the data and parities to RAID disks. If +parities are incompleted, they are discarded. If part of data is corrupted, +they are discarded too. MD then loads valid data and writes them to RAID disks +in normal way. diff --git a/Documentation/media/dvb-drivers/ci.rst b/Documentation/media/dvb-drivers/ci.rst index 8124bf5ce5ef..69b07e9d1816 100644 --- a/Documentation/media/dvb-drivers/ci.rst +++ b/Documentation/media/dvb-drivers/ci.rst @@ -20,7 +20,7 @@ existing low level CI API. ca_zap ~~~~~~ -An userspace application, like ``ca_zap`` is required to handle encrypted +A userspace application, like ``ca_zap`` is required to handle encrypted MPEG-TS streams. The ``ca_zap`` userland application is in charge of sending the diff --git a/Documentation/media/kapi/mc-core.rst b/Documentation/media/kapi/mc-core.rst index 1a738e5f6056..0c05503eaf1f 100644 --- a/Documentation/media/kapi/mc-core.rst +++ b/Documentation/media/kapi/mc-core.rst @@ -162,13 +162,13 @@ framework provides a depth-first graph traversal API for that purpose. currently defined as 16. Drivers initiate a graph traversal by calling -:c:func:`media_entity_graph_walk_start()` +:c:func:`media_graph_walk_start()` The graph structure, provided by the caller, is initialized to start graph traversal at the given entity. Drivers can then retrieve the next entity by calling -:c:func:`media_entity_graph_walk_next()` +:c:func:`media_graph_walk_next()` When the graph traversal is complete the function will return ``NULL``. @@ -206,7 +206,7 @@ Pipelines and media streams When starting streaming, drivers must notify all entities in the pipeline to prevent link states from being modified during streaming by calling -:c:func:`media_entity_pipeline_start()`. +:c:func:`media_pipeline_start()`. The function will mark all entities connected to the given entity through enabled links, either directly or indirectly, as streaming. @@ -218,17 +218,17 @@ in higher-level pipeline structures and can then access the pipeline through the struct :c:type:`media_entity` pipe field. -Calls to :c:func:`media_entity_pipeline_start()` can be nested. +Calls to :c:func:`media_pipeline_start()` can be nested. The pipeline pointer must be identical for all nested calls to the function. -:c:func:`media_entity_pipeline_start()` may return an error. In that case, +:c:func:`media_pipeline_start()` may return an error. In that case, it will clean up any of the changes it did by itself. When stopping the stream, drivers must notify the entities with -:c:func:`media_entity_pipeline_stop()`. +:c:func:`media_pipeline_stop()`. -If multiple calls to :c:func:`media_entity_pipeline_start()` have been -made the same number of :c:func:`media_entity_pipeline_stop()` calls +If multiple calls to :c:func:`media_pipeline_start()` have been +made the same number of :c:func:`media_pipeline_stop()` calls are required to stop streaming. The :c:type:`media_entity`.\ ``pipe`` field is reset to ``NULL`` on the last nested stop call. @@ -245,7 +245,7 @@ operation must be done with the media_device graph_mutex held. Link validation ^^^^^^^^^^^^^^^ -Link validation is performed by :c:func:`media_entity_pipeline_start()` +Link validation is performed by :c:func:`media_pipeline_start()` for any entity which has sink pads in the pipeline. The :c:type:`media_entity`.\ ``link_validate()`` callback is used for that purpose. In ``link_validate()`` callback, entity driver should check diff --git a/Documentation/media/uapi/cec/cec-func-close.rst b/Documentation/media/uapi/cec/cec-func-close.rst index 8267c31b317d..895d9c2d1c04 100644 --- a/Documentation/media/uapi/cec/cec-func-close.rst +++ b/Documentation/media/uapi/cec/cec-func-close.rst @@ -33,11 +33,6 @@ Arguments Description =========== -.. note:: - - This documents the proposed CEC API. This API is not yet finalized - and is currently only available as a staging kernel module. - Closes the cec device. Resources associated with the file descriptor are freed. The device configuration remain unchanged. diff --git a/Documentation/media/uapi/cec/cec-func-ioctl.rst b/Documentation/media/uapi/cec/cec-func-ioctl.rst index 9e8dbb118d6a..7dcfd178fb24 100644 --- a/Documentation/media/uapi/cec/cec-func-ioctl.rst +++ b/Documentation/media/uapi/cec/cec-func-ioctl.rst @@ -39,11 +39,6 @@ Arguments Description =========== -.. note:: - - This documents the proposed CEC API. This API is not yet finalized - and is currently only available as a staging kernel module. - The :c:func:`ioctl()` function manipulates cec device parameters. The argument ``fd`` must be an open file descriptor. diff --git a/Documentation/media/uapi/cec/cec-func-open.rst b/Documentation/media/uapi/cec/cec-func-open.rst index af3f5b5c24c6..0304388cd159 100644 --- a/Documentation/media/uapi/cec/cec-func-open.rst +++ b/Documentation/media/uapi/cec/cec-func-open.rst @@ -46,11 +46,6 @@ Arguments Description =========== -.. note:: - - This documents the proposed CEC API. This API is not yet finalized - and is currently only available as a staging kernel module. - To open a cec device applications call :c:func:`open()` with the desired device name. The function has no side effects; the device configuration remain unchanged. diff --git a/Documentation/media/uapi/cec/cec-func-poll.rst b/Documentation/media/uapi/cec/cec-func-poll.rst index cfb73e6027a5..6a863cfda6e0 100644 --- a/Documentation/media/uapi/cec/cec-func-poll.rst +++ b/Documentation/media/uapi/cec/cec-func-poll.rst @@ -39,11 +39,6 @@ Arguments Description =========== -.. note:: - - This documents the proposed CEC API. This API is not yet finalized - and is currently only available as a staging kernel module. - With the :c:func:`poll()` function applications can wait for CEC events. diff --git a/Documentation/media/uapi/cec/cec-intro.rst b/Documentation/media/uapi/cec/cec-intro.rst index 4a19ea5323a9..07ee2b8f89d6 100644 --- a/Documentation/media/uapi/cec/cec-intro.rst +++ b/Documentation/media/uapi/cec/cec-intro.rst @@ -3,11 +3,6 @@ Introduction ============ -.. note:: - - This documents the proposed CEC API. This API is not yet finalized - and is currently only available as a staging kernel module. - HDMI connectors provide a single pin for use by the Consumer Electronics Control protocol. This protocol allows different devices connected by an HDMI cable to communicate. The protocol for CEC version 1.4 is defined @@ -31,3 +26,15 @@ control just the CEC pin. Drivers that support CEC will create a CEC device node (/dev/cecX) to give userspace access to the CEC adapter. The :ref:`CEC_ADAP_G_CAPS` ioctl will tell userspace what it is allowed to do. + +In order to check the support and test it, it is suggested to download +the `v4l-utils <https://git.linuxtv.org/v4l-utils.git/>`_ package. It +provides three tools to handle CEC: + +- cec-ctl: the Swiss army knife of CEC. Allows you to configure, transmit + and monitor CEC messages. + +- cec-compliance: does a CEC compliance test of a remote CEC device to + determine how compliant the CEC implementation is. + +- cec-follower: emulates a CEC follower. diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst index 2b0ddb14b280..a0e961f11017 100644 --- a/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst +++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst @@ -29,11 +29,6 @@ Arguments Description =========== -.. note:: - - This documents the proposed CEC API. This API is not yet finalized - and is currently only available as a staging kernel module. - All cec devices must support :ref:`ioctl CEC_ADAP_G_CAPS <CEC_ADAP_G_CAPS>`. To query device information, applications call the ioctl with a pointer to a struct :c:type:`cec_caps`. The driver fills the structure and diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst index b878637e91b3..09f09bbe28d4 100644 --- a/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst +++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst @@ -35,11 +35,6 @@ Arguments Description =========== -.. note:: - - This documents the proposed CEC API. This API is not yet finalized - and is currently only available as a staging kernel module. - To query the current CEC logical addresses, applications call :ref:`ioctl CEC_ADAP_G_LOG_ADDRS <CEC_ADAP_G_LOG_ADDRS>` with a pointer to a struct :c:type:`cec_log_addrs` where the driver stores the logical addresses. diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst index 3357deb43c85..a3cdc75cec3e 100644 --- a/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst +++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst @@ -35,11 +35,6 @@ Arguments Description =========== -.. note:: - - This documents the proposed CEC API. This API is not yet finalized - and is currently only available as a staging kernel module. - To query the current physical address applications call :ref:`ioctl CEC_ADAP_G_PHYS_ADDR <CEC_ADAP_G_PHYS_ADDR>` with a pointer to a __u16 where the driver stores the physical address. diff --git a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst index e256c6605de7..6e589a1fae17 100644 --- a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst +++ b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst @@ -30,11 +30,6 @@ Arguments Description =========== -.. note:: - - This documents the proposed CEC API. This API is not yet finalized - and is currently only available as a staging kernel module. - CEC devices can send asynchronous events. These can be retrieved by calling :c:func:`CEC_DQEVENT`. If the file descriptor is in non-blocking mode and no event is pending, then it will return -1 and diff --git a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst index 4f5818b9d277..e4ded9df0a84 100644 --- a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst +++ b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst @@ -31,11 +31,6 @@ Arguments Description =========== -.. note:: - - This documents the proposed CEC API. This API is not yet finalized - and is currently only available as a staging kernel module. - By default any filehandle can use :ref:`CEC_TRANSMIT`, but in order to prevent applications from stepping on each others toes it must be possible to obtain exclusive access to the CEC adapter. This ioctl sets the diff --git a/Documentation/media/uapi/cec/cec-ioc-receive.rst b/Documentation/media/uapi/cec/cec-ioc-receive.rst index bdf015b1d1dc..dc2adb391c0a 100644 --- a/Documentation/media/uapi/cec/cec-ioc-receive.rst +++ b/Documentation/media/uapi/cec/cec-ioc-receive.rst @@ -34,11 +34,6 @@ Arguments Description =========== -.. note:: - - This documents the proposed CEC API. This API is not yet finalized - and is currently only available as a staging kernel module. - To receive a CEC message the application has to fill in the ``timeout`` field of struct :c:type:`cec_msg` and pass it to :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`. diff --git a/Documentation/media/uapi/dvb/dvb-frontend-parameters.rst b/Documentation/media/uapi/dvb/dvb-frontend-parameters.rst index bf31411fc9df..899fd5c3545e 100644 --- a/Documentation/media/uapi/dvb/dvb-frontend-parameters.rst +++ b/Documentation/media/uapi/dvb/dvb-frontend-parameters.rst @@ -9,7 +9,7 @@ frontend parameters The kind of parameters passed to the frontend device for tuning depend on the kind of hardware you are using. -The struct ``dvb_frontend_parameters`` uses an union with specific +The struct ``dvb_frontend_parameters`` uses a union with specific per-system parameters. However, as newer delivery systems required more data, the structure size weren't enough to fit, and just extending its size would break the existing applications. So, those parameters were @@ -23,7 +23,7 @@ So, newer applications should use instead, in order to be able to support the newer System Delivery like DVB-S2, DVB-T2, DVB-C2, ISDB, etc. -All kinds of parameters are combined as an union in the +All kinds of parameters are combined as a union in the FrontendParameters structure: diff --git a/Documentation/media/uapi/gen-errors.rst b/Documentation/media/uapi/gen-errors.rst index 6e983b9880fc..d39e34d1b19d 100644 --- a/Documentation/media/uapi/gen-errors.rst +++ b/Documentation/media/uapi/gen-errors.rst @@ -94,9 +94,17 @@ Generic Error Codes - Permission denied. Can be returned if the device needs write permission, or some special capabilities is needed (e. g. root) + - .. row 11 + + - ``EIO`` + + - I/O error. Typically used when there are problems communicating with + a hardware device. This could indicate broken or flaky hardware. + It's a 'Something is wrong, I give up!' type of error. + .. note:: - #. This list is not exaustive; ioctls may return other error codes. + #. This list is not exhaustive; ioctls may return other error codes. Since errors may have side effects such as a driver reset, applications should abort on unexpected errors, or otherwise assume that the device is in a bad state. diff --git a/Documentation/media/uapi/rc/rc-sysfs-nodes.rst b/Documentation/media/uapi/rc/rc-sysfs-nodes.rst index 6fb944fe21fd..3476ae29708f 100644 --- a/Documentation/media/uapi/rc/rc-sysfs-nodes.rst +++ b/Documentation/media/uapi/rc/rc-sysfs-nodes.rst @@ -92,15 +92,16 @@ This value may be reset to 0 if the current protocol is altered. Reading this file returns a list of available protocols to use for the wakeup filter, something like: -``rc5 rc6 nec jvc [sony]`` +``rc-5 nec nec-x rc-6-0 rc-6-6a-24 [rc-6-6a-32] rc-6-mce`` -The enabled wakeup protocol is shown in [] brackets. +Note that protocol variants are listed, so "nec", "sony", "rc-5", "rc-6" +have their different bit length encodings listed if available. -Writing "+proto" will add a protocol to the list of enabled wakeup -protocols. +Note that all protocol variants are listed. -Writing "-proto" will remove a protocol from the list of enabled wakeup -protocols. +The enabled wakeup protocol is shown in [] brackets. + +Only one protocol can be selected at a time. Writing "proto" will use "proto" for wakeup events. diff --git a/Documentation/media/uapi/v4l/pixfmt-007.rst b/Documentation/media/uapi/v4l/pixfmt-007.rst index 44bb5a7059b3..95a23a28c595 100644 --- a/Documentation/media/uapi/v4l/pixfmt-007.rst +++ b/Documentation/media/uapi/v4l/pixfmt-007.rst @@ -211,7 +211,13 @@ Colorspace sRGB (V4L2_COLORSPACE_SRGB) The :ref:`srgb` standard defines the colorspace used by most webcams and computer graphics. The default transfer function is ``V4L2_XFER_FUNC_SRGB``. The default Y'CbCr encoding is -``V4L2_YCBCR_ENC_601``. The default Y'CbCr quantization is full range. +``V4L2_YCBCR_ENC_601``. The default Y'CbCr quantization is limited range. + +Note that the :ref:`sycc` standard specifies full range quantization, +however all current capture hardware supported by the kernel convert +R'G'B' to limited range Y'CbCr. So choosing full range as the default +would break how applications interpret the quantization range. + The chromaticities of the primary colors and the white reference are: @@ -276,7 +282,7 @@ the following ``V4L2_YCBCR_ENC_601`` encoding as defined by :ref:`sycc`: Y' is clamped to the range [0…1] and Cb and Cr are clamped to the range [-0.5…0.5]. This transform is identical to one defined in SMPTE -170M/BT.601. The Y'CbCr quantization is full range. +170M/BT.601. The Y'CbCr quantization is limited range. .. _col-adobergb: @@ -288,10 +294,15 @@ The :ref:`adobergb` standard defines the colorspace used by computer graphics that use the AdobeRGB colorspace. This is also known as the :ref:`oprgb` standard. The default transfer function is ``V4L2_XFER_FUNC_ADOBERGB``. The default Y'CbCr encoding is -``V4L2_YCBCR_ENC_601``. The default Y'CbCr quantization is full -range. The chromaticities of the primary colors and the white reference -are: +``V4L2_YCBCR_ENC_601``. The default Y'CbCr quantization is limited +range. + +Note that the :ref:`oprgb` standard specifies full range quantization, +however all current capture hardware supported by the kernel convert +R'G'B' to limited range Y'CbCr. So choosing full range as the default +would break how applications interpret the quantization range. +The chromaticities of the primary colors and the white reference are: .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -344,7 +355,7 @@ the following ``V4L2_YCBCR_ENC_601`` encoding: Y' is clamped to the range [0…1] and Cb and Cr are clamped to the range [-0.5…0.5]. This transform is identical to one defined in SMPTE -170M/BT.601. The Y'CbCr quantization is full range. +170M/BT.601. The Y'CbCr quantization is limited range. .. _col-bt2020: diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt index ba818ecce6f9..d2b0a8d81258 100644 --- a/Documentation/memory-barriers.txt +++ b/Documentation/memory-barriers.txt @@ -640,6 +640,10 @@ See also the subsection on "Cache Coherency" for a more thorough example. CONTROL DEPENDENCIES -------------------- +Control dependencies can be a bit tricky because current compilers do +not understand them. The purpose of this section is to help you prevent +the compiler's ignorance from breaking your code. + A load-load control dependency requires a full read memory barrier, not simply a data dependency barrier to make it work correctly. Consider the following bit of code: @@ -667,14 +671,15 @@ for load-store control dependencies, as in the following example: q = READ_ONCE(a); if (q) { - WRITE_ONCE(b, p); + WRITE_ONCE(b, 1); } -Control dependencies pair normally with other types of barriers. That -said, please note that READ_ONCE() is not optional! Without the -READ_ONCE(), the compiler might combine the load from 'a' with other -loads from 'a', and the store to 'b' with other stores to 'b', with -possible highly counterintuitive effects on ordering. +Control dependencies pair normally with other types of barriers. +That said, please note that neither READ_ONCE() nor WRITE_ONCE() +are optional! Without the READ_ONCE(), the compiler might combine the +load from 'a' with other loads from 'a'. Without the WRITE_ONCE(), +the compiler might combine the store to 'b' with other stores to 'b'. +Either can result in highly counterintuitive effects on ordering. Worse yet, if the compiler is able to prove (say) that the value of variable 'a' is always non-zero, it would be well within its rights @@ -682,7 +687,7 @@ to optimize the original example by eliminating the "if" statement as follows: q = a; - b = p; /* BUG: Compiler and CPU can both reorder!!! */ + b = 1; /* BUG: Compiler and CPU can both reorder!!! */ So don't leave out the READ_ONCE(). @@ -692,11 +697,11 @@ branches of the "if" statement as follows: q = READ_ONCE(a); if (q) { barrier(); - WRITE_ONCE(b, p); + WRITE_ONCE(b, 1); do_something(); } else { barrier(); - WRITE_ONCE(b, p); + WRITE_ONCE(b, 1); do_something_else(); } @@ -705,12 +710,12 @@ optimization levels: q = READ_ONCE(a); barrier(); - WRITE_ONCE(b, p); /* BUG: No ordering vs. load from a!!! */ + WRITE_ONCE(b, 1); /* BUG: No ordering vs. load from a!!! */ if (q) { - /* WRITE_ONCE(b, p); -- moved up, BUG!!! */ + /* WRITE_ONCE(b, 1); -- moved up, BUG!!! */ do_something(); } else { - /* WRITE_ONCE(b, p); -- moved up, BUG!!! */ + /* WRITE_ONCE(b, 1); -- moved up, BUG!!! */ do_something_else(); } @@ -723,10 +728,10 @@ memory barriers, for example, smp_store_release(): q = READ_ONCE(a); if (q) { - smp_store_release(&b, p); + smp_store_release(&b, 1); do_something(); } else { - smp_store_release(&b, p); + smp_store_release(&b, 1); do_something_else(); } @@ -735,10 +740,10 @@ ordering is guaranteed only when the stores differ, for example: q = READ_ONCE(a); if (q) { - WRITE_ONCE(b, p); + WRITE_ONCE(b, 1); do_something(); } else { - WRITE_ONCE(b, r); + WRITE_ONCE(b, 2); do_something_else(); } @@ -751,10 +756,10 @@ the needed conditional. For example: q = READ_ONCE(a); if (q % MAX) { - WRITE_ONCE(b, p); + WRITE_ONCE(b, 1); do_something(); } else { - WRITE_ONCE(b, r); + WRITE_ONCE(b, 2); do_something_else(); } @@ -763,7 +768,7 @@ equal to zero, in which case the compiler is within its rights to transform the above code into the following: q = READ_ONCE(a); - WRITE_ONCE(b, p); + WRITE_ONCE(b, 1); do_something_else(); Given this transformation, the CPU is not required to respect the ordering @@ -776,10 +781,10 @@ one, perhaps as follows: q = READ_ONCE(a); BUILD_BUG_ON(MAX <= 1); /* Order load from a with store to b. */ if (q % MAX) { - WRITE_ONCE(b, p); + WRITE_ONCE(b, 1); do_something(); } else { - WRITE_ONCE(b, r); + WRITE_ONCE(b, 2); do_something_else(); } @@ -812,30 +817,28 @@ not necessarily apply to code following the if-statement: q = READ_ONCE(a); if (q) { - WRITE_ONCE(b, p); + WRITE_ONCE(b, 1); } else { - WRITE_ONCE(b, r); + WRITE_ONCE(b, 2); } - WRITE_ONCE(c, 1); /* BUG: No ordering against the read from "a". */ + WRITE_ONCE(c, 1); /* BUG: No ordering against the read from 'a'. */ It is tempting to argue that there in fact is ordering because the compiler cannot reorder volatile accesses and also cannot reorder -the writes to "b" with the condition. Unfortunately for this line -of reasoning, the compiler might compile the two writes to "b" as +the writes to 'b' with the condition. Unfortunately for this line +of reasoning, the compiler might compile the two writes to 'b' as conditional-move instructions, as in this fanciful pseudo-assembly language: ld r1,a - ld r2,p - ld r3,r cmp r1,$0 - cmov,ne r4,r2 - cmov,eq r4,r3 + cmov,ne r4,$1 + cmov,eq r4,$2 st r4,b st $1,c A weakly ordered CPU would have no dependency of any sort between the load -from "a" and the store to "c". The control dependencies would extend +from 'a' and the store to 'c'. The control dependencies would extend only to the pair of cmov instructions and the store depending on them. In short, control dependencies apply only to the stores in the then-clause and else-clause of the if-statement in question (including functions @@ -843,7 +846,7 @@ invoked by those two clauses), not to code following that if-statement. Finally, control dependencies do -not- provide transitivity. This is demonstrated by two related examples, with the initial values of -x and y both being zero: +'x' and 'y' both being zero: CPU 0 CPU 1 ======================= ======================= @@ -915,6 +918,9 @@ In summary: (*) Control dependencies do -not- provide transitivity. If you need transitivity, use smp_mb(). + (*) Compilers do not understand control dependencies. It is therefore + your job to ensure that they do not break your code. + SMP BARRIER PAIRING ------------------- diff --git a/Documentation/memory-hotplug.txt b/Documentation/memory-hotplug.txt index 5de846d3ecc0..670f3ded0802 100644 --- a/Documentation/memory-hotplug.txt +++ b/Documentation/memory-hotplug.txt @@ -114,11 +114,11 @@ config options. Memory model -> Sparse Memory (CONFIG_SPARSEMEM) Allow for memory hot-add (CONFIG_MEMORY_HOTPLUG) -- To enable memory removal, the followings are also necessary +- To enable memory removal, the following are also necessary Allow for memory hot remove (CONFIG_MEMORY_HOTREMOVE) Page Migration (CONFIG_MIGRATION) -- For ACPI memory hotplug, the followings are also necessary +- For ACPI memory hotplug, the following are also necessary Memory hotplug (under ACPI Support menu) (CONFIG_ACPI_HOTPLUG_MEMORY) This option can be kernel module. diff --git a/Documentation/mtd/intel-spi.txt b/Documentation/mtd/intel-spi.txt new file mode 100644 index 000000000000..bc357729c2cb --- /dev/null +++ b/Documentation/mtd/intel-spi.txt @@ -0,0 +1,88 @@ +Upgrading BIOS using intel-spi +------------------------------ + +Many Intel CPUs like Baytrail and Braswell include SPI serial flash host +controller which is used to hold BIOS and other platform specific data. +Since contents of the SPI serial flash is crucial for machine to function, +it is typically protected by different hardware protection mechanisms to +avoid accidental (or on purpose) overwrite of the content. + +Not all manufacturers protect the SPI serial flash, mainly because it +allows upgrading the BIOS image directly from an OS. + +The intel-spi driver makes it possible to read and write the SPI serial +flash, if certain protection bits are not set and locked. If it finds +any of them set, the whole MTD device is made read-only to prevent +partial overwrites. By default the driver exposes SPI serial flash +contents as read-only but it can be changed from kernel command line, +passing "intel-spi.writeable=1". + +Please keep in mind that overwriting the BIOS image on SPI serial flash +might render the machine unbootable and requires special equipment like +Dediprog to revive. You have been warned! + +Below are the steps how to upgrade MinnowBoard MAX BIOS directly from +Linux. + + 1) Download and extract the latest Minnowboard MAX BIOS SPI image + [1]. At the time writing this the latest image is v92. + + 2) Install mtd-utils package [2]. We need this in order to erase the SPI + serial flash. Distros like Debian and Fedora have this prepackaged with + name "mtd-utils". + + 3) Add "intel-spi.writeable=1" to the kernel command line and reboot + the board (you can also reload the driver passing "writeable=1" as + module parameter to modprobe). + + 4) Once the board is up and running again, find the right MTD partition + (it is named as "BIOS"): + + # cat /proc/mtd + dev: size erasesize name + mtd0: 00800000 00001000 "BIOS" + + So here it will be /dev/mtd0 but it may vary. + + 5) Make backup of the existing image first: + + # dd if=/dev/mtd0ro of=bios.bak + 16384+0 records in + 16384+0 records out + 8388608 bytes (8.4 MB) copied, 10.0269 s, 837 kB/s + + 6) Verify the backup + + # sha1sum /dev/mtd0ro bios.bak + fdbb011920572ca6c991377c4b418a0502668b73 /dev/mtd0ro + fdbb011920572ca6c991377c4b418a0502668b73 bios.bak + + The SHA1 sums must match. Otherwise do not continue any further! + + 7) Erase the SPI serial flash. After this step, do not reboot the + board! Otherwise it will not start anymore. + + # flash_erase /dev/mtd0 0 0 + Erasing 4 Kibyte @ 7ff000 -- 100 % complete + + 8) Once completed without errors you can write the new BIOS image: + + # dd if=MNW2MAX1.X64.0092.R01.1605221712.bin of=/dev/mtd0 + + 9) Verify that the new content of the SPI serial flash matches the new + BIOS image: + + # sha1sum /dev/mtd0ro MNW2MAX1.X64.0092.R01.1605221712.bin + 9b4df9e4be2057fceec3a5529ec3d950836c87a2 /dev/mtd0ro + 9b4df9e4be2057fceec3a5529ec3d950836c87a2 MNW2MAX1.X64.0092.R01.1605221712.bin + + The SHA1 sums should match. + + 10) Now you can reboot your board and observe the new BIOS starting up + properly. + +References +---------- + +[1] https://firmware.intel.com/sites/default/files/MinnowBoard.MAX_.X64.92.R01.zip +[2] http://www.linux-mtd.infradead.org/ diff --git a/Documentation/networking/cdc_mbim.txt b/Documentation/networking/cdc_mbim.txt index a15ea602aa52..b9482ca10254 100644 --- a/Documentation/networking/cdc_mbim.txt +++ b/Documentation/networking/cdc_mbim.txt @@ -38,7 +38,7 @@ Basic usage =========== MBIM functions are inactive when unmanaged. The cdc_mbim driver only -provides an userspace interface to the MBIM control channel, and will +provides a userspace interface to the MBIM control channel, and will not participate in the management of the function. This implies that a userspace MBIM management application always is required to enable a MBIM function. @@ -200,7 +200,7 @@ structure described in section 10.5.29 of [1]. The DSS VLAN subdevices are used as a practical interface between the shared MBIM data channel and a MBIM DSS aware userspace application. It is not intended to be presented as-is to an end user. The -assumption is that an userspace application initiating a DSS session +assumption is that a userspace application initiating a DSS session also takes care of the necessary framing of the DSS data, presenting the stream to the end user in an appropriate way for the stream type. diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt index 63912ef34606..b8b40753133e 100644 --- a/Documentation/networking/dsa/dsa.txt +++ b/Documentation/networking/dsa/dsa.txt @@ -295,7 +295,6 @@ DSA currently leverages the following subsystems: - MDIO/PHY library: drivers/net/phy/phy.c, mdio_bus.c - Switchdev: net/switchdev/* - Device Tree for various of_* functions -- HWMON: drivers/hwmon/* MDIO/PHY library ---------------- @@ -349,12 +348,6 @@ Documentation/devicetree/bindings/net/dsa/dsa.txt. PHY/MDIO library helper functions such as of_get_phy_mode(), of_phy_connect() are also used to query per-port PHY specific details: interface connection, MDIO bus location etc.. -HWMON ------ - -Some switch drivers feature internal temperature sensors which are exposed as -regular HWMON devices in /sys/class/hwmon/. - Driver development ================== @@ -495,23 +488,6 @@ Power management BR_STATE_DISABLED and propagating changes to the hardware if this port is disabled while being a bridge member -Hardware monitoring -------------------- - -These callbacks are only available if CONFIG_NET_DSA_HWMON is enabled: - -- get_temp: this function queries the given switch for its temperature - -- get_temp_limit: this function returns the switch current maximum temperature - limit - -- set_temp_limit: this function configures the maximum temperature limit allowed - -- get_temp_alarm: this function returns the critical temperature threshold - returning an alarm notification - -See Documentation/hwmon/sysfs-interface for details. - Bridge layer ------------ diff --git a/Documentation/networking/gtp.txt b/Documentation/networking/gtp.txt new file mode 100644 index 000000000000..93e96750f103 --- /dev/null +++ b/Documentation/networking/gtp.txt @@ -0,0 +1,135 @@ +The Linux kernel GTP tunneling module +====================================================================== +Documentation by Harald Welte <laforge@gnumonks.org> + +In 'drivers/net/gtp.c' you are finding a kernel-level implementation +of a GTP tunnel endpoint. + +== What is GTP == + +GTP is the Generic Tunnel Protocol, which is a 3GPP protocol used for +tunneling User-IP payload between a mobile station (phone, modem) +and the interconnection between an external packet data network (such +as the internet). + +So when you start a 'data connection' from your mobile phone, the +phone will use the control plane to signal for the establishment of +such a tunnel between that external data network and the phone. The +tunnel endpoints thus reside on the phone and in the gateway. All +intermediate nodes just transport the encapsulated packet. + +The phone itself does not implement GTP but uses some other +technology-dependent protocol stack for transmitting the user IP +payload, such as LLC/SNDCP/RLC/MAC. + +At some network element inside the cellular operator infrastructure +(SGSN in case of GPRS/EGPRS or classic UMTS, hNodeB in case of a 3G +femtocell, eNodeB in case of 4G/LTE), the cellular protocol stacking +is translated into GTP *without breaking the end-to-end tunnel*. So +intermediate nodes just perform some specific relay function. + +At some point the GTP packet ends up on the so-called GGSN (GSM/UMTS) +or P-GW (LTE), which terminates the tunnel, decapsulates the packet +and forwards it onto an external packet data network. This can be +public internet, but can also be any private IP network (or even +theoretically some non-IP network like X.25). + +You can find the protocol specification in 3GPP TS 29.060, available +publicly via the 3GPP website at http://www.3gpp.org/DynaReport/29060.htm + +A direct PDF link to v13.6.0 is provided for convenience below: +http://www.etsi.org/deliver/etsi_ts/129000_129099/129060/13.06.00_60/ts_129060v130600p.pdf + +== The Linux GTP tunnelling module == + +The module implements the function of a tunnel endpoint, i.e. it is +able to decapsulate tunneled IP packets in the uplink originated by +the phone, and encapsulate raw IP packets received from the external +packet network in downlink towards the phone. + +It *only* implements the so-called 'user plane', carrying the User-IP +payload, called GTP-U. It does not implement the 'control plane', +which is a signaling protocol used for establishment and teardown of +GTP tunnels (GTP-C). + +So in order to have a working GGSN/P-GW setup, you will need a +userspace program that implements the GTP-C protocol and which then +uses the netlink interface provided by the GTP-U module in the kernel +to configure the kernel module. + +This split architecture follows the tunneling modules of other +protocols, e.g. PPPoE or L2TP, where you also run a userspace daemon +to handle the tunnel establishment, authentication etc. and only the +data plane is accelerated inside the kernel. + +Don't be confused by terminology: The GTP User Plane goes through +kernel accelerated path, while the GTP Control Plane goes to +Userspace :) + +The official homepge of the module is at +https://osmocom.org/projects/linux-kernel-gtp-u/wiki + +== Userspace Programs with Linux Kernel GTP-U support == + +At the time of this writing, there are at least two Free Software +implementations that implement GTP-C and can use the netlink interface +to make use of the Linux kernel GTP-U support: + +* OpenGGSN (classic 2G/3G GGSN in C): + https://osmocom.org/projects/openggsn/wiki/OpenGGSN + +* ergw (GGSN + P-GW in Erlang): + https://github.com/travelping/ergw + +== Userspace Library / Command Line Utilities == + +There is a userspace library called 'libgtpnl' which is based on +libmnl and which implements a C-language API towards the netlink +interface provided by the Kernel GTP module: + +http://git.osmocom.org/libgtpnl/ + +== Protocol Versions == + +There are two different versions of GTP-U: v0 and v1. Both are +implemented in the Kernel GTP module. Version 0 is a legacy version, +and deprecated from recent 3GPP specifications. + +There are three versions of GTP-C: v0, v1, and v2. As the kernel +doesn't implement GTP-C, we don't have to worry about this. It's the +responsibility of the control plane implementation in userspace to +implement that. + +== IPv6 == + +The 3GPP specifications indicate either IPv4 or IPv6 can be used both +on the inner (user) IP layer, or on the outer (transport) layer. + +Unfortunately, the Kernel module currently supports IPv6 neither for +the User IP payload, nor for the outer IP layer. Patches or other +Contributions to fix this are most welcome! + +== Mailing List == + +If yo have questions regarding how to use the Kernel GTP module from +your own software, or want to contribute to the code, please use the +osmocom-net-grps mailing list for related discussion. The list can be +reached at osmocom-net-gprs@lists.osmocom.org and the mailman +interface for managign your subscription is at +https://lists.osmocom.org/mailman/listinfo/osmocom-net-gprs + +== Issue Tracker == + +The Osmocom project maintains an issue tracker for the Kernel GTP-U +module at +https://osmocom.org/projects/linux-kernel-gtp-u/issues + +== History / Acknowledgements == + +The Module was originally created in 2012 by Harald Welte, but never +completed. Pablo came in to finish the mess Harald left behind. But +doe to a lack of user interest, it never got merged. + +In 2015, Andreas Schultz came to the rescue and fixed lots more bugs, +extended it with new features and finally pushed all of us to get it +mainline, where it was merged in 4.7.0. diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 7dd65c9cf707..fc73eeb7b3b8 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -246,21 +246,12 @@ tcp_dsack - BOOLEAN Allows TCP to send "duplicate" SACKs. tcp_early_retrans - INTEGER - Enable Early Retransmit (ER), per RFC 5827. ER lowers the threshold - for triggering fast retransmit when the amount of outstanding data is - small and when no previously unsent data can be transmitted (such - that limited transmit could be used). Also controls the use of - Tail loss probe (TLP) that converts RTOs occurring due to tail - losses into fast recovery (draft-dukkipati-tcpm-tcp-loss-probe-01). + Tail loss probe (TLP) converts RTOs occurring due to tail + losses into fast recovery (draft-ietf-tcpm-rack). Note that + TLP requires RACK to function properly (see tcp_recovery below) Possible values: - 0 disables ER - 1 enables ER - 2 enables ER but delays fast recovery and fast retransmit - by a fourth of RTT. This mitigates connection falsely - recovers when network has a small degree of reordering - (less than 3 packets). - 3 enables delayed ER and TLP. - 4 enables TLP only. + 0 disables TLP + 3 or 4 enables TLP Default: 3 tcp_ecn - INTEGER @@ -712,18 +703,6 @@ tcp_thin_linear_timeouts - BOOLEAN Documentation/networking/tcp-thin.txt Default: 0 -tcp_thin_dupack - BOOLEAN - Enable dynamic triggering of retransmissions after one dupACK - for thin streams. If set, a check is performed upon reception - of a dupACK to determine if the stream is thin (less than 4 - packets in flight). As long as the stream is found to be thin, - data is retransmitted on the first received dupACK. This - improves retransmission latency for non-aggressive thin - streams, often found to be time-dependent. - For more information on thin streams, see - Documentation/networking/tcp-thin.txt - Default: 0 - tcp_limit_output_bytes - INTEGER Controls TCP Small Queue limit per tcp socket. TCP bulk sender tends to increase packets in flight until it @@ -742,6 +721,13 @@ tcp_challenge_ack_limit - INTEGER UDP variables: +udp_l3mdev_accept - BOOLEAN + Enabling this option allows a "global" bound socket to work + across L3 master domains (e.g., VRFs) with packets capable of + being received regardless of the L3 domain in which they + originated. Only valid when the kernel was compiled with + CONFIG_NET_L3_MASTER_DEV. + udp_mem - vector of 3 INTEGERs: min, pressure, max Number of pages allowed for queueing by all UDP sockets. @@ -843,6 +829,15 @@ ip_local_reserved_ports - list of comma separated ranges Default: Empty +ip_unprivileged_port_start - INTEGER + This is a per-namespace sysctl. It defines the first + unprivileged port in the network namespace. Privileged ports + require root or CAP_NET_BIND_SERVICE in order to bind to them. + To disable all privileged ports, set this to 0. It may not + overlap with the ip_local_reserved_ports range. + + Default: 1024 + ip_nonlocal_bind - BOOLEAN If set, allows processes to bind() to non-local IP addresses, which can be quite useful - but may break some applications. diff --git a/Documentation/networking/mpls-sysctl.txt b/Documentation/networking/mpls-sysctl.txt index 9ed15f86c17c..15d8d16934fd 100644 --- a/Documentation/networking/mpls-sysctl.txt +++ b/Documentation/networking/mpls-sysctl.txt @@ -5,8 +5,8 @@ platform_labels - INTEGER possible to configure forwarding for label values equal to or greater than the number of platform labels. - A dense utliziation of the entries in the platform label table - is possible and expected aas the platform labels are locally + A dense utilization of the entries in the platform label table + is possible and expected as the platform labels are locally allocated. If the number of platform label table entries is set to 0 no diff --git a/Documentation/networking/netfilter-sysctl.txt b/Documentation/networking/netfilter-sysctl.txt new file mode 100644 index 000000000000..55791e50e169 --- /dev/null +++ b/Documentation/networking/netfilter-sysctl.txt @@ -0,0 +1,10 @@ +/proc/sys/net/netfilter/* Variables: + +nf_log_all_netns - BOOLEAN + 0 - disabled (default) + not 0 - enabled + + By default, only init_net namespace can log packets into kernel log + with LOG target; this aims to prevent containers from flooding host + kernel log. If enabled, this target also works in other network + namespaces. This variable is only accessible from init_net. diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt index daa015af16a0..f3b9e507ab05 100644 --- a/Documentation/networking/packet_mmap.txt +++ b/Documentation/networking/packet_mmap.txt @@ -565,7 +565,7 @@ TPACKET_V1 --> TPACKET_V2: (void *)hdr + TPACKET_ALIGN(sizeof(struct tpacket_hdr)) TPACKET_V2 --> TPACKET_V3: - - Flexible buffer implementation: + - Flexible buffer implementation for RX_RING: 1. Blocks can be configured with non-static frame-size 2. Read/poll is at a block-level (as opposed to packet-level) 3. Added poll timeout to avoid indefinite user-space wait @@ -574,7 +574,12 @@ TPACKET_V2 --> TPACKET_V3: 4.1 block::timeout 4.2 tpkt_hdr::sk_rxhash - RX Hash data available in user space - - Currently only RX_RING available + - TX_RING semantics are conceptually similar to TPACKET_V2; + use tpacket3_hdr instead of tpacket2_hdr, and TPACKET3_HDRLEN + instead of TPACKET2_HDRLEN. In the current implementation, + the tp_next_offset field in the tpacket3_hdr MUST be set to + zero, indicating that the ring does not hold variable sized frames. + Packets with non-zero values of tp_next_offset will be dropped. ------------------------------------------------------------------------------- + AF_PACKET fanout mode diff --git a/Documentation/networking/regulatory.txt b/Documentation/networking/regulatory.txt index 356f791af574..7818b5fe448b 100644 --- a/Documentation/networking/regulatory.txt +++ b/Documentation/networking/regulatory.txt @@ -156,12 +156,12 @@ struct ieee80211_regdomain mydriver_jp_regdom = { //.alpha2 = "99", /* If I have no alpha2 to map it to */ .reg_rules = { /* IEEE 802.11b/g, channels 1..14 */ - REG_RULE(2412-20, 2484+20, 40, 6, 20, 0), + REG_RULE(2412-10, 2484+10, 40, 6, 20, 0), /* IEEE 802.11a, channels 34..48 */ - REG_RULE(5170-20, 5240+20, 40, 6, 20, + REG_RULE(5170-10, 5240+10, 40, 6, 20, NL80211_RRF_NO_IR), /* IEEE 802.11a, channels 52..64 */ - REG_RULE(5260-20, 5320+20, 40, 6, 20, + REG_RULE(5260-10, 5320+10, 40, 6, 20, NL80211_RRF_NO_IR| NL80211_RRF_DFS), } @@ -205,7 +205,7 @@ the data in regdb.c as an alternative to using CRDA. The file net/wireless/db.txt should be kept up-to-date with the db.txt file available in the git repository here: - git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-regdb.git + git://git.kernel.org/pub/scm/linux/kernel/git/sforshee/wireless-regdb.git Again, most users in most situations should be using the CRDA package provided with their distribution, and in most other situations users diff --git a/Documentation/networking/vrf.txt b/Documentation/networking/vrf.txt index 755dab856392..3918dae964d4 100644 --- a/Documentation/networking/vrf.txt +++ b/Documentation/networking/vrf.txt @@ -98,10 +98,11 @@ VRF device: or to specify the output device using cmsg and IP_PKTINFO. -TCP services running in the default VRF context (ie., not bound to any VRF -device) can work across all VRF domains by enabling the tcp_l3mdev_accept -sysctl option: +TCP & UDP services running in the default VRF context (ie., not bound +to any VRF device) can work across all VRF domains by enabling the +tcp_l3mdev_accept and udp_l3mdev_accept sysctl options: sysctl -w net.ipv4.tcp_l3mdev_accept=1 + sysctl -w net.ipv4.udp_l3mdev_accept=1 netfilter rules on the VRF device can be used to limit access to services running in the default VRF context as well. diff --git a/Documentation/perf/qcom_l2_pmu.txt b/Documentation/perf/qcom_l2_pmu.txt new file mode 100644 index 000000000000..b25b97659ab9 --- /dev/null +++ b/Documentation/perf/qcom_l2_pmu.txt @@ -0,0 +1,38 @@ +Qualcomm Technologies Level-2 Cache Performance Monitoring Unit (PMU) +===================================================================== + +This driver supports the L2 cache clusters found in Qualcomm Technologies +Centriq SoCs. There are multiple physical L2 cache clusters, each with their +own PMU. Each cluster has one or more CPUs associated with it. + +There is one logical L2 PMU exposed, which aggregates the results from +the physical PMUs. + +The driver provides a description of its available events and configuration +options in sysfs, see /sys/devices/l2cache_0. + +The "format" directory describes the format of the events. + +Events can be envisioned as a 2-dimensional array. Each column represents +a group of events. There are 8 groups. Only one entry from each +group can be in use at a time. If multiple events from the same group +are specified, the conflicting events cannot be counted at the same time. + +Events are specified as 0xCCG, where CC is 2 hex digits specifying +the code (array row) and G specifies the group (column) 0-7. + +In addition there is a cycle counter event specified by the value 0xFE +which is outside the above scheme. + +The driver provides a "cpumask" sysfs attribute which contains a mask +consisting of one CPU per cluster which will be used to handle all the PMU +events on that cluster. + +Examples for use with perf: + + perf stat -e l2cache_0/config=0x001/,l2cache_0/config=0x042/ -a sleep 1 + + perf stat -e l2cache_0/config=0xfe/ -C 2 sleep 1 + +The driver does not support sampling, therefore "perf record" will +not work. Per-task perf sessions are not supported. diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index 0d3b9ce0a0b9..54bd5faa8782 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -79,9 +79,7 @@ int __init foo_probe(void) { struct pinctrl_dev *pctl; - pctl = pinctrl_register(&foo_desc, <PARENT>, NULL); - if (!pctl) - pr_err("could not register foo pin driver\n"); + return pinctrl_register_and_init(&foo_desc, <PARENT>, NULL, &pctl); } To enable the pinctrl subsystem and the subgroups for PINMUX and PINCONF and diff --git a/Documentation/power/opp.txt b/Documentation/power/opp.txt index c6279c2be47c..0c007e250cd1 100644 --- a/Documentation/power/opp.txt +++ b/Documentation/power/opp.txt @@ -79,22 +79,6 @@ dependent subsystems such as cpufreq are left to the discretion of the SoC specific framework which uses the OPP library. Similar care needs to be taken care to refresh the cpufreq table in cases of these operations. -WARNING on OPP List locking mechanism: -------------------------------------------------- -OPP library uses RCU for exclusivity. RCU allows the query functions to operate -in multiple contexts and this synchronization mechanism is optimal for a read -intensive operations on data structure as the OPP library caters to. - -To ensure that the data retrieved are sane, the users such as SoC framework -should ensure that the section of code operating on OPP queries are locked -using RCU read locks. The opp_find_freq_{exact,ceil,floor}, -opp_get_{voltage, freq, opp_count} fall into this category. - -opp_{add,enable,disable} are updaters which use mutex and implement it's own -RCU locking mechanisms. These functions should *NOT* be called under RCU locks -and other contexts that prevent blocking functions in RCU or mutex operations -from working. - 2. Initial OPP List Registration ================================ The SoC implementation calls dev_pm_opp_add function iteratively to add OPPs per @@ -137,15 +121,18 @@ functions return the matching pointer representing the opp if a match is found, else returns error. These errors are expected to be handled by standard error checks such as IS_ERR() and appropriate actions taken by the caller. +Callers of these functions shall call dev_pm_opp_put() after they have used the +OPP. Otherwise the memory for the OPP will never get freed and result in +memleak. + dev_pm_opp_find_freq_exact - Search for an OPP based on an *exact* frequency and availability. This function is especially useful to enable an OPP which is not available by default. Example: In a case when SoC framework detects a situation where a higher frequency could be made available, it can use this function to find the OPP prior to call the dev_pm_opp_enable to actually make it available. - rcu_read_lock(); opp = dev_pm_opp_find_freq_exact(dev, 1000000000, false); - rcu_read_unlock(); + dev_pm_opp_put(opp); /* dont operate on the pointer.. just do a sanity check.. */ if (IS_ERR(opp)) { pr_err("frequency not disabled!\n"); @@ -163,9 +150,8 @@ dev_pm_opp_find_freq_floor - Search for an available OPP which is *at most* the frequency. Example: To find the highest opp for a device: freq = ULONG_MAX; - rcu_read_lock(); - dev_pm_opp_find_freq_floor(dev, &freq); - rcu_read_unlock(); + opp = dev_pm_opp_find_freq_floor(dev, &freq); + dev_pm_opp_put(opp); dev_pm_opp_find_freq_ceil - Search for an available OPP which is *at least* the provided frequency. This function is useful while searching for a @@ -173,17 +159,15 @@ dev_pm_opp_find_freq_ceil - Search for an available OPP which is *at least* the frequency. Example 1: To find the lowest opp for a device: freq = 0; - rcu_read_lock(); - dev_pm_opp_find_freq_ceil(dev, &freq); - rcu_read_unlock(); + opp = dev_pm_opp_find_freq_ceil(dev, &freq); + dev_pm_opp_put(opp); Example 2: A simplified implementation of a SoC cpufreq_driver->target: soc_cpufreq_target(..) { /* Do stuff like policy checks etc. */ /* Find the best frequency match for the req */ - rcu_read_lock(); opp = dev_pm_opp_find_freq_ceil(dev, &freq); - rcu_read_unlock(); + dev_pm_opp_put(opp); if (!IS_ERR(opp)) soc_switch_to_freq_voltage(freq); else @@ -208,9 +192,8 @@ dev_pm_opp_enable - Make a OPP available for operation. implementation might choose to do something as follows: if (cur_temp < temp_low_thresh) { /* Enable 1GHz if it was disabled */ - rcu_read_lock(); opp = dev_pm_opp_find_freq_exact(dev, 1000000000, false); - rcu_read_unlock(); + dev_pm_opp_put(opp); /* just error check */ if (!IS_ERR(opp)) ret = dev_pm_opp_enable(dev, 1000000000); @@ -224,9 +207,8 @@ dev_pm_opp_disable - Make an OPP to be not available for operation choose to do something as follows: if (cur_temp > temp_high_thresh) { /* Disable 1GHz if it was enabled */ - rcu_read_lock(); opp = dev_pm_opp_find_freq_exact(dev, 1000000000, true); - rcu_read_unlock(); + dev_pm_opp_put(opp); /* just error check */ if (!IS_ERR(opp)) ret = dev_pm_opp_disable(dev, 1000000000); @@ -249,10 +231,9 @@ dev_pm_opp_get_voltage - Retrieve the voltage represented by the opp pointer. soc_switch_to_freq_voltage(freq) { /* do things */ - rcu_read_lock(); opp = dev_pm_opp_find_freq_ceil(dev, &freq); v = dev_pm_opp_get_voltage(opp); - rcu_read_unlock(); + dev_pm_opp_put(opp); if (v) regulator_set_voltage(.., v); /* do other things */ @@ -266,12 +247,12 @@ dev_pm_opp_get_freq - Retrieve the freq represented by the opp pointer. { /* do things.. */ max_freq = ULONG_MAX; - rcu_read_lock(); max_opp = dev_pm_opp_find_freq_floor(dev,&max_freq); requested_opp = dev_pm_opp_find_freq_ceil(dev,&freq); if (!IS_ERR(max_opp) && !IS_ERR(requested_opp)) r = soc_test_validity(max_opp, requested_opp); - rcu_read_unlock(); + dev_pm_opp_put(max_opp); + dev_pm_opp_put(requested_opp); /* do other things */ } soc_test_validity(..) @@ -289,7 +270,6 @@ dev_pm_opp_get_opp_count - Retrieve the number of available opps for a device soc_notify_coproc_available_frequencies() { /* Do things */ - rcu_read_lock(); num_available = dev_pm_opp_get_opp_count(dev); speeds = kzalloc(sizeof(u32) * num_available, GFP_KERNEL); /* populate the table in increasing order */ @@ -298,8 +278,8 @@ dev_pm_opp_get_opp_count - Retrieve the number of available opps for a device speeds[i] = freq; freq++; i++; + dev_pm_opp_put(opp); } - rcu_read_unlock(); soc_notify_coproc(AVAILABLE_FREQs, speeds, num_available); /* Do other things */ diff --git a/Documentation/power/pm_qos_interface.txt b/Documentation/power/pm_qos_interface.txt index 129f7c0e1483..21d2d48f87a2 100644 --- a/Documentation/power/pm_qos_interface.txt +++ b/Documentation/power/pm_qos_interface.txt @@ -163,8 +163,7 @@ of flags and remove sysfs attributes pm_qos_no_power_off and pm_qos_remote_wakeu under the device's power directory. Notification mechanisms: -The per-device PM QoS framework has 2 different and distinct notification trees: -a per-device notification tree and a global notification tree. +The per-device PM QoS framework has a per-device notification tree. int dev_pm_qos_add_notifier(device, notifier): Adds a notification callback function for the device. @@ -174,16 +173,6 @@ is changed (for resume latency device PM QoS only). int dev_pm_qos_remove_notifier(device, notifier): Removes the notification callback function for the device. -int dev_pm_qos_add_global_notifier(notifier): -Adds a notification callback function in the global notification tree of the -framework. -The callback is called when the aggregated value for any device is changed -(for resume latency device PM QoS only). - -int dev_pm_qos_remove_global_notifier(notifier): -Removes the notification callback function from the global notification tree -of the framework. - Active state latency tolerance diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 4870980e967e..64546eb9a16a 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -100,7 +100,7 @@ knows what to do to handle the device). * If the suspend callback returns an error code different from -EBUSY and -EAGAIN, the PM core regards this as a fatal error and will refuse to run the helper functions described in Section 4 for the device until its status - is directly set to either'active', or 'suspended' (the PM core provides + is directly set to either 'active', or 'suspended' (the PM core provides special helper functions for this purpose). In particular, if the driver requires remote wakeup capability (i.e. hardware @@ -217,7 +217,7 @@ defined in include/linux/pm.h: one to complete spinlock_t lock; - - lock used for synchronisation + - lock used for synchronization atomic_t usage_count; - the usage counter of the device @@ -565,7 +565,7 @@ appropriate to ensure that the device is not put back to sleep during the probe. This can happen with systems such as the network device layer. It may be desirable to suspend the device once ->probe() has finished. -Therefore the driver core uses the asyncronous pm_request_idle() to submit a +Therefore the driver core uses the asynchronous pm_request_idle() to submit a request to execute the subsystem-level idle callback for the device at that time. A driver that makes use of the runtime autosuspend feature, may want to update the last busy mark before returning from ->probe(). diff --git a/Documentation/power/states.txt b/Documentation/power/states.txt index 8a39ce45d8a0..bc4548245a24 100644 --- a/Documentation/power/states.txt +++ b/Documentation/power/states.txt @@ -25,7 +25,7 @@ to be used subsequently to change to the one represented by that string. Consequently, there are two ways to cause the system to go into the Suspend-To-Idle sleep state. The first one is to write "freeze" directly to /sys/power/state. The second one is to write "s2idle" to /sys/power/mem_sleep -and then to wrtie "mem" to /sys/power/state. Similarly, there are two ways +and then to write "mem" to /sys/power/state. Similarly, there are two ways to cause the system to go into the Power-On Suspend sleep state (the strings to write to the control files in that case are "standby" or "shallow" and "mem", respectively) if that state is supported by the platform. In turn, there is @@ -35,9 +35,7 @@ only one way to cause the system to go into the Suspend-To-RAM state (write The default suspend mode (ie. the one to be used without writing anything into /sys/power/mem_sleep) is either "deep" (if Suspend-To-RAM is supported) or "s2idle", but it can be overridden by the value of the "mem_sleep_default" -parameter in the kernel command line. On some ACPI-based systems, depending on -the information in the FADT, the default may be "s2idle" even if Suspend-To-RAM -is supported. +parameter in the kernel command line. The properties of all of the sleep states are described below. diff --git a/Documentation/scheduler/sched-deadline.txt b/Documentation/scheduler/sched-deadline.txt index 8e37b0ba2c9d..cbc1b46cbf70 100644 --- a/Documentation/scheduler/sched-deadline.txt +++ b/Documentation/scheduler/sched-deadline.txt @@ -408,6 +408,11 @@ CONTENTS * the new scheduling related syscalls that manipulate it, i.e., sched_setattr() and sched_getattr() are implemented. + For debugging purposes, the leftover runtime and absolute deadline of a + SCHED_DEADLINE task can be retrieved through /proc/<pid>/sched (entries + dl.runtime and dl.deadline, both values in ns). A programmatic way to + retrieve these values from production code is under discussion. + 4.3 Default behavior --------------------- @@ -476,6 +481,7 @@ CONTENTS Still missing: + - programmatic way to retrieve current runtime and absolute deadline - refinements to deadline inheritance, especially regarding the possibility of retaining bandwidth isolation among non-interacting tasks. This is being studied from both theoretical and practical points of view, and diff --git a/Documentation/scheduler/sched-rt-group.txt b/Documentation/scheduler/sched-rt-group.txt index a03f0d944fe6..d8fce3e78457 100644 --- a/Documentation/scheduler/sched-rt-group.txt +++ b/Documentation/scheduler/sched-rt-group.txt @@ -158,11 +158,11 @@ as its prone to starvation without deadline scheduling. Consider two sibling groups A and B; both have 50% bandwidth, but A's period is twice the length of B's. -* group A: period=100000us, runtime=10000us - - this runs for 0.01s once every 0.1s +* group A: period=100000us, runtime=50000us + - this runs for 0.05s once every 0.1s -* group B: period= 50000us, runtime=10000us - - this runs for 0.01s twice every 0.1s (or once every 0.05 sec). +* group B: period= 50000us, runtime=25000us + - this runs for 0.025s twice every 0.1s (or once every 0.05 sec). This means that currently a while (1) loop in A will run for the full period of B and can starve B's tasks (assuming they are of lower priority) for a whole diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas index 00ffdf187f0b..234ddabb23ef 100644 --- a/Documentation/scsi/ChangeLog.megaraid_sas +++ b/Documentation/scsi/ChangeLog.megaraid_sas @@ -549,7 +549,7 @@ ii. Reduced by 1 max cmds sent to FW from Driver to make the reply_q_sz same 3 Older Version : 00.00.03.02 i. Send stop adapter to FW & Dump pending FW cmds before declaring adapter dead. - New varible added to set dbg level. + New variable added to set dbg level. ii. Disable interrupt made as fn pointer as they are different for 1068 / 1078 iii. Frame count optimization. Main frame can contain 2 SGE for 64 bit SGLs and 3 SGE for 32 bit SGL diff --git a/Documentation/security/LSM.txt b/Documentation/security/LSM.txt index 3db7e671c440..c2683f28ed36 100644 --- a/Documentation/security/LSM.txt +++ b/Documentation/security/LSM.txt @@ -22,6 +22,13 @@ system, building their checks on top of the defined capability hooks. For more details on capabilities, see capabilities(7) in the Linux man-pages project. +A list of the active security modules can be found by reading +/sys/kernel/security/lsm. This is a comma separated list, and +will always include the capability module. The list reflects the +order in which checks are made. The capability module will always +be first, followed by any "minor" modules (e.g. Yama) and then +the one "major" module (e.g. SELinux) if there is one configured. + Based on https://lkml.org/lkml/2007/10/26/215, a new LSM is accepted into the kernel when its intent (a description of what it tries to protect against and in what cases one would expect to diff --git a/Documentation/security/keys.txt b/Documentation/security/keys.txt index 3849814bfe6d..0e03baf271bd 100644 --- a/Documentation/security/keys.txt +++ b/Documentation/security/keys.txt @@ -1151,8 +1151,21 @@ access the data: usage. This is called key->payload.rcu_data0. The following accessors wrap the RCU calls to this element: - rcu_assign_keypointer(struct key *key, void *data); - void *rcu_dereference_key(struct key *key); + (a) Set or change the first payload pointer: + + rcu_assign_keypointer(struct key *key, void *data); + + (b) Read the first payload pointer with the key semaphore held: + + [const] void *dereference_key_locked([const] struct key *key); + + Note that the return value will inherit its constness from the key + parameter. Static analysis will give an error if it things the lock + isn't held. + + (c) Read the first payload pointer with the RCU read lock held: + + const void *dereference_key_rcu(const struct key *key); =================== diff --git a/Documentation/security/self-protection.txt b/Documentation/security/self-protection.txt index 3010576c9fca..141acfebe6ef 100644 --- a/Documentation/security/self-protection.txt +++ b/Documentation/security/self-protection.txt @@ -51,11 +51,17 @@ kernel, they are implemented in a way where the memory is temporarily made writable during the update, and then returned to the original permissions.) -In support of this are (the poorly named) CONFIG_DEBUG_RODATA and -CONFIG_DEBUG_SET_MODULE_RONX, which seek to make sure that code is not +In support of this are CONFIG_STRICT_KERNEL_RWX and +CONFIG_STRICT_MODULE_RWX, which seek to make sure that code is not writable, data is not executable, and read-only data is neither writable nor executable. +Most architectures have these options on by default and not user selectable. +For some architectures like arm that wish to have these be selectable, +the architecture Kconfig can select ARCH_OPTIONAL_KERNEL_RWX to enable +a Kconfig prompt. CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT determines +the default setting when ARCH_OPTIONAL_KERNEL_RWX is enabled. + #### Function pointers and sensitive variables must not be writable Vast areas of kernel memory contain function pointers that are looked diff --git a/Documentation/siphash.txt b/Documentation/siphash.txt new file mode 100644 index 000000000000..908d348ff777 --- /dev/null +++ b/Documentation/siphash.txt @@ -0,0 +1,175 @@ + SipHash - a short input PRF +----------------------------------------------- +Written by Jason A. Donenfeld <jason@zx2c4.com> + +SipHash is a cryptographically secure PRF -- a keyed hash function -- that +performs very well for short inputs, hence the name. It was designed by +cryptographers Daniel J. Bernstein and Jean-Philippe Aumasson. It is intended +as a replacement for some uses of: `jhash`, `md5_transform`, `sha_transform`, +and so forth. + +SipHash takes a secret key filled with randomly generated numbers and either +an input buffer or several input integers. It spits out an integer that is +indistinguishable from random. You may then use that integer as part of secure +sequence numbers, secure cookies, or mask it off for use in a hash table. + +1. Generating a key + +Keys should always be generated from a cryptographically secure source of +random numbers, either using get_random_bytes or get_random_once: + +siphash_key_t key; +get_random_bytes(&key, sizeof(key)); + +If you're not deriving your key from here, you're doing it wrong. + +2. Using the functions + +There are two variants of the function, one that takes a list of integers, and +one that takes a buffer: + +u64 siphash(const void *data, size_t len, const siphash_key_t *key); + +And: + +u64 siphash_1u64(u64, const siphash_key_t *key); +u64 siphash_2u64(u64, u64, const siphash_key_t *key); +u64 siphash_3u64(u64, u64, u64, const siphash_key_t *key); +u64 siphash_4u64(u64, u64, u64, u64, const siphash_key_t *key); +u64 siphash_1u32(u32, const siphash_key_t *key); +u64 siphash_2u32(u32, u32, const siphash_key_t *key); +u64 siphash_3u32(u32, u32, u32, const siphash_key_t *key); +u64 siphash_4u32(u32, u32, u32, u32, const siphash_key_t *key); + +If you pass the generic siphash function something of a constant length, it +will constant fold at compile-time and automatically choose one of the +optimized functions. + +3. Hashtable key function usage: + +struct some_hashtable { + DECLARE_HASHTABLE(hashtable, 8); + siphash_key_t key; +}; + +void init_hashtable(struct some_hashtable *table) +{ + get_random_bytes(&table->key, sizeof(table->key)); +} + +static inline hlist_head *some_hashtable_bucket(struct some_hashtable *table, struct interesting_input *input) +{ + return &table->hashtable[siphash(input, sizeof(*input), &table->key) & (HASH_SIZE(table->hashtable) - 1)]; +} + +You may then iterate like usual over the returned hash bucket. + +4. Security + +SipHash has a very high security margin, with its 128-bit key. So long as the +key is kept secret, it is impossible for an attacker to guess the outputs of +the function, even if being able to observe many outputs, since 2^128 outputs +is significant. + +Linux implements the "2-4" variant of SipHash. + +5. Struct-passing Pitfalls + +Often times the XuY functions will not be large enough, and instead you'll +want to pass a pre-filled struct to siphash. When doing this, it's important +to always ensure the struct has no padding holes. The easiest way to do this +is to simply arrange the members of the struct in descending order of size, +and to use offsetendof() instead of sizeof() for getting the size. For +performance reasons, if possible, it's probably a good thing to align the +struct to the right boundary. Here's an example: + +const struct { + struct in6_addr saddr; + u32 counter; + u16 dport; +} __aligned(SIPHASH_ALIGNMENT) combined = { + .saddr = *(struct in6_addr *)saddr, + .counter = counter, + .dport = dport +}; +u64 h = siphash(&combined, offsetofend(typeof(combined), dport), &secret); + +6. Resources + +Read the SipHash paper if you're interested in learning more: +https://131002.net/siphash/siphash.pdf + + +~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~ + +HalfSipHash - SipHash's insecure younger cousin +----------------------------------------------- +Written by Jason A. Donenfeld <jason@zx2c4.com> + +On the off-chance that SipHash is not fast enough for your needs, you might be +able to justify using HalfSipHash, a terrifying but potentially useful +possibility. HalfSipHash cuts SipHash's rounds down from "2-4" to "1-3" and, +even scarier, uses an easily brute-forcable 64-bit key (with a 32-bit output) +instead of SipHash's 128-bit key. However, this may appeal to some +high-performance `jhash` users. + +Danger! + +Do not ever use HalfSipHash except for as a hashtable key function, and only +then when you can be absolutely certain that the outputs will never be +transmitted out of the kernel. This is only remotely useful over `jhash` as a +means of mitigating hashtable flooding denial of service attacks. + +1. Generating a key + +Keys should always be generated from a cryptographically secure source of +random numbers, either using get_random_bytes or get_random_once: + +hsiphash_key_t key; +get_random_bytes(&key, sizeof(key)); + +If you're not deriving your key from here, you're doing it wrong. + +2. Using the functions + +There are two variants of the function, one that takes a list of integers, and +one that takes a buffer: + +u32 hsiphash(const void *data, size_t len, const hsiphash_key_t *key); + +And: + +u32 hsiphash_1u32(u32, const hsiphash_key_t *key); +u32 hsiphash_2u32(u32, u32, const hsiphash_key_t *key); +u32 hsiphash_3u32(u32, u32, u32, const hsiphash_key_t *key); +u32 hsiphash_4u32(u32, u32, u32, u32, const hsiphash_key_t *key); + +If you pass the generic hsiphash function something of a constant length, it +will constant fold at compile-time and automatically choose one of the +optimized functions. + +3. Hashtable key function usage: + +struct some_hashtable { + DECLARE_HASHTABLE(hashtable, 8); + hsiphash_key_t key; +}; + +void init_hashtable(struct some_hashtable *table) +{ + get_random_bytes(&table->key, sizeof(table->key)); +} + +static inline hlist_head *some_hashtable_bucket(struct some_hashtable *table, struct interesting_input *input) +{ + return &table->hashtable[hsiphash(input, sizeof(*input), &table->key) & (HASH_SIZE(table->hashtable) - 1)]; +} + +You may then iterate like usual over the returned hash bucket. + +4. Performance + +HalfSipHash is roughly 3 times slower than JenkinsHash. For many replacements, +this will not be a problem, as the hashtable lookup isn't the bottleneck. And +in general, this is probably a good sacrifice to make for the security and DoS +resistance of HalfSipHash. diff --git a/Documentation/sound/hd-audio/dp-mst.rst b/Documentation/sound/hd-audio/dp-mst.rst index 58b72437e6c3..1617459e332f 100644 --- a/Documentation/sound/hd-audio/dp-mst.rst +++ b/Documentation/sound/hd-audio/dp-mst.rst @@ -19,6 +19,23 @@ PCM === To be added +Pin Initialization +================== +Each pin may have several device entries (virtual pins). On Intel platform, +the device entries number is dynamically changed. If DP MST hub is connected, +it is in DP MST mode, and the device entries number is 3. Otherwise, the +device entries number is 1. + +To simplify the implementation, all the device entries will be initialized +when bootup no matter whether it is in DP MST mode or not. + +Connection list +=============== +DP MST reuses connection list code. The code can be reused because +device entries on the same pin have the same connection list. + +This means DP MST gets the device entry connection list without the +device entry setting. Jack ==== diff --git a/Documentation/sound/hd-audio/notes.rst b/Documentation/sound/hd-audio/notes.rst index 168d0cfab1ce..9eeb9b468706 100644 --- a/Documentation/sound/hd-audio/notes.rst +++ b/Documentation/sound/hd-audio/notes.rst @@ -697,7 +697,7 @@ If it's a regression, at best, send alsa-info outputs of both working and non-working kernels. This is really helpful because we can compare the codec registers directly. -Send a bug report either the followings: +Send a bug report either the following: kernel-bugzilla https://bugzilla.kernel.org/ diff --git a/Documentation/sparc/console.txt b/Documentation/sparc/console.txt new file mode 100644 index 000000000000..5aa735a44e02 --- /dev/null +++ b/Documentation/sparc/console.txt @@ -0,0 +1,9 @@ +Steps for sending 'break' on sunhv console: +=========================================== + +On Baremetal: + 1. press Esc + 'B' + +On LDOM: + 1. press Ctrl + ']' + 2. telnet> send break diff --git a/Documentation/spi/ep93xx_spi b/Documentation/spi/ep93xx_spi deleted file mode 100644 index 832ddce6e5fb..000000000000 --- a/Documentation/spi/ep93xx_spi +++ /dev/null @@ -1,105 +0,0 @@ -Cirrus EP93xx SPI controller driver HOWTO -========================================= - -ep93xx_spi driver brings SPI master support for EP93xx SPI controller. Chip -selects are implemented with GPIO lines. - -NOTE: If possible, don't use SFRMOUT (SFRM1) signal as a chip select. It will -not work correctly (it cannot be controlled by software). Use GPIO lines -instead. - -Sample configuration -==================== - -Typically driver configuration is done in platform board files (the files under -arch/arm/mach-ep93xx/*.c). In this example we configure MMC over SPI through -this driver on TS-7260 board. You can adapt the code to suit your needs. - -This example uses EGPIO9 as SD/MMC card chip select (this is wired in DIO1 -header on the board). - -You need to select CONFIG_MMC_SPI to use mmc_spi driver. - -arch/arm/mach-ep93xx/ts72xx.c: - -... -#include <linux/gpio.h> -#include <linux/spi/spi.h> - -#include <linux/platform_data/spi-ep93xx.h> - -/* this is our GPIO line used for chip select */ -#define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO9 - -static int ts72xx_mmc_spi_setup(struct spi_device *spi) -{ - int err; - - err = gpio_request(MMC_CHIP_SELECT_GPIO, spi->modalias); - if (err) - return err; - - gpio_direction_output(MMC_CHIP_SELECT_GPIO, 1); - - return 0; -} - -static void ts72xx_mmc_spi_cleanup(struct spi_device *spi) -{ - gpio_set_value(MMC_CHIP_SELECT_GPIO, 1); - gpio_direction_input(MMC_CHIP_SELECT_GPIO); - gpio_free(MMC_CHIP_SELECT_GPIO); -} - -static void ts72xx_mmc_spi_cs_control(struct spi_device *spi, int value) -{ - gpio_set_value(MMC_CHIP_SELECT_GPIO, value); -} - -static struct ep93xx_spi_chip_ops ts72xx_mmc_spi_ops = { - .setup = ts72xx_mmc_spi_setup, - .cleanup = ts72xx_mmc_spi_cleanup, - .cs_control = ts72xx_mmc_spi_cs_control, -}; - -static struct spi_board_info ts72xx_spi_devices[] __initdata = { - { - .modalias = "mmc_spi", - .controller_data = &ts72xx_mmc_spi_ops, - /* - * We use 10 MHz even though the maximum is 7.4 MHz. The driver - * will limit it automatically to max. frequency. - */ - .max_speed_hz = 10 * 1000 * 1000, - .bus_num = 0, - .chip_select = 0, - .mode = SPI_MODE_0, - }, -}; - -static struct ep93xx_spi_info ts72xx_spi_info = { - .num_chipselect = ARRAY_SIZE(ts72xx_spi_devices), -}; - -static void __init ts72xx_init_machine(void) -{ - ... - ep93xx_register_spi(&ts72xx_spi_info, ts72xx_spi_devices, - ARRAY_SIZE(ts72xx_spi_devices)); -} - -The driver can use DMA for the transfers also. In this case ts72xx_spi_info -becomes: - -static struct ep93xx_spi_info ts72xx_spi_info = { - .num_chipselect = ARRAY_SIZE(ts72xx_spi_devices), - .use_dma = true; -}; - -Note that CONFIG_EP93XX_DMA should be enabled as well. - -Thanks to -========= -Martin Guy, H. Hartley Sweeten and others who helped me during development of -the driver. Simplemachines.it donated me a Sim.One board which I used testing -the driver on EP9307. diff --git a/Documentation/static-keys.txt b/Documentation/static-keys.txt index ea8d7b4e53f0..32a25fad0c1b 100644 --- a/Documentation/static-keys.txt +++ b/Documentation/static-keys.txt @@ -155,7 +155,9 @@ or: There are a few functions and macros that architectures must implement in order to take advantage of this optimization. If there is no architecture support, we -simply fall back to a traditional, load, test, and jump sequence. +simply fall back to a traditional, load, test, and jump sequence. Also, the +struct jump_entry table must be at least 4-byte aligned because the +static_key->entry field makes use of the two least significant bits. * select HAVE_ARCH_JUMP_LABEL, see: arch/x86/Kconfig diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt index f0480f7ea740..2ebabc93014a 100644 --- a/Documentation/sysctl/net.txt +++ b/Documentation/sysctl/net.txt @@ -54,6 +54,18 @@ Values : 1 - enable JIT hardening for unprivileged users only 2 - enable JIT hardening for all users +bpf_jit_kallsyms +---------------- + +When Berkeley Packet Filter Just in Time compiler is enabled, then compiled +images are unknown addresses to the kernel, meaning they neither show up in +traces nor in /proc/kallsyms. This enables export of these addresses, which +can be used for debugging/tracing. If bpf_jit_harden is enabled, this feature +is disabled. +Values : + 0 - disable JIT kallsyms export (default value) + 1 - enable JIT kallsyms export for privileged users only + dev_weight -------------- @@ -61,6 +73,27 @@ The maximum number of packets that kernel can handle on a NAPI interrupt, it's a Per-CPU variable. Default: 64 +dev_weight_rx_bias +-------------- + +RPS (e.g. RFS, aRFS) processing is competing with the registered NAPI poll function +of the driver for the per softirq cycle netdev_budget. This parameter influences +the proportion of the configured netdev_budget that is spent on RPS based packet +processing during RX softirq cycles. It is further meant for making current +dev_weight adaptable for asymmetric CPU needs on RX/TX side of the network stack. +(see dev_weight_tx_bias) It is effective on a per CPU basis. Determination is based +on dev_weight and is calculated multiplicative (dev_weight * dev_weight_rx_bias). +Default: 1 + +dev_weight_tx_bias +-------------- + +Scales the maximum number of packets that can be processed during a TX softirq cycle. +Effective on a per CPU basis. Allows scaling of current dev_weight for asymmetric +net stack processing needs. Be careful to avoid making TX softirq processing a CPU hog. +Calculation is based on dev_weight (dev_weight * dev_weight_tx_bias). +Default: 1 + default_qdisc -------------- diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index 95ccbe6d79ce..b4ad97f10b8e 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -376,8 +376,8 @@ max_map_count: This file contains the maximum number of memory map areas a process may have. Memory map areas are used as a side-effect of calling -malloc, directly by mmap and mprotect, and also when loading shared -libraries. +malloc, directly by mmap, mprotect, and madvise, and also when loading +shared libraries. While most applications need less than a thousand maps, certain programs, particularly malloc debuggers, may consume lots of them, diff --git a/Documentation/timers/timer_stats.txt b/Documentation/timers/timer_stats.txt deleted file mode 100644 index de835ee97455..000000000000 --- a/Documentation/timers/timer_stats.txt +++ /dev/null @@ -1,73 +0,0 @@ -timer_stats - timer usage statistics ------------------------------------- - -timer_stats is a debugging facility to make the timer (ab)usage in a Linux -system visible to kernel and userspace developers. If enabled in the config -but not used it has almost zero runtime overhead, and a relatively small -data structure overhead. Even if collection is enabled runtime all the -locking is per-CPU and lookup is hashed. - -timer_stats should be used by kernel and userspace developers to verify that -their code does not make unduly use of timers. This helps to avoid unnecessary -wakeups, which should be avoided to optimize power consumption. - -It can be enabled by CONFIG_TIMER_STATS in the "Kernel hacking" configuration -section. - -timer_stats collects information about the timer events which are fired in a -Linux system over a sample period: - -- the pid of the task(process) which initialized the timer -- the name of the process which initialized the timer -- the function where the timer was initialized -- the callback function which is associated to the timer -- the number of events (callbacks) - -timer_stats adds an entry to /proc: /proc/timer_stats - -This entry is used to control the statistics functionality and to read out the -sampled information. - -The timer_stats functionality is inactive on bootup. - -To activate a sample period issue: -# echo 1 >/proc/timer_stats - -To stop a sample period issue: -# echo 0 >/proc/timer_stats - -The statistics can be retrieved by: -# cat /proc/timer_stats - -While sampling is enabled, each readout from /proc/timer_stats will see -newly updated statistics. Once sampling is disabled, the sampled information -is kept until a new sample period is started. This allows multiple readouts. - -Sample output of /proc/timer_stats: - -Timerstats sample period: 3.888770 s - 12, 0 swapper hrtimer_stop_sched_tick (hrtimer_sched_tick) - 15, 1 swapper hcd_submit_urb (rh_timer_func) - 4, 959 kedac schedule_timeout (process_timeout) - 1, 0 swapper page_writeback_init (wb_timer_fn) - 28, 0 swapper hrtimer_stop_sched_tick (hrtimer_sched_tick) - 22, 2948 IRQ 4 tty_flip_buffer_push (delayed_work_timer_fn) - 3, 3100 bash schedule_timeout (process_timeout) - 1, 1 swapper queue_delayed_work_on (delayed_work_timer_fn) - 1, 1 swapper queue_delayed_work_on (delayed_work_timer_fn) - 1, 1 swapper neigh_table_init_no_netlink (neigh_periodic_timer) - 1, 2292 ip __netdev_watchdog_up (dev_watchdog) - 1, 23 events/1 do_cache_clean (delayed_work_timer_fn) -90 total events, 30.0 events/sec - -The first column is the number of events, the second column the pid, the third -column is the name of the process. The forth column shows the function which -initialized the timer and in parenthesis the callback function which was -executed on expiry. - - Thomas, Ingo - -Added flag to indicate 'deferrable timer' in /proc/timer_stats. A deferrable -timer will appear as follows - 10D, 1 swapper queue_delayed_work_on (delayed_work_timer_fn) - diff --git a/Documentation/trace/postprocess/trace-vmscan-postprocess.pl b/Documentation/trace/postprocess/trace-vmscan-postprocess.pl index 8f961ef2b457..ba976805853a 100644 --- a/Documentation/trace/postprocess/trace-vmscan-postprocess.pl +++ b/Documentation/trace/postprocess/trace-vmscan-postprocess.pl @@ -112,8 +112,8 @@ my $regex_direct_end_default = 'nr_reclaimed=([0-9]*)'; my $regex_kswapd_wake_default = 'nid=([0-9]*) order=([0-9]*)'; my $regex_kswapd_sleep_default = 'nid=([0-9]*)'; my $regex_wakeup_kswapd_default = 'nid=([0-9]*) zid=([0-9]*) order=([0-9]*)'; -my $regex_lru_isolate_default = 'isolate_mode=([0-9]*) order=([0-9]*) nr_requested=([0-9]*) nr_scanned=([0-9]*) nr_taken=([0-9]*) file=([0-9]*)'; -my $regex_lru_shrink_inactive_default = 'nid=([0-9]*) zid=([0-9]*) nr_scanned=([0-9]*) nr_reclaimed=([0-9]*) priority=([0-9]*) flags=([A-Z_|]*)'; +my $regex_lru_isolate_default = 'isolate_mode=([0-9]*) classzone_idx=([0-9]*) order=([0-9]*) nr_requested=([0-9]*) nr_scanned=([0-9]*) nr_skipped=([0-9]*) nr_taken=([0-9]*) lru=([a-z_]*)'; +my $regex_lru_shrink_inactive_default = 'nid=([0-9]*) nr_scanned=([0-9]*) nr_reclaimed=([0-9]*) nr_dirty=([0-9]*) nr_writeback=([0-9]*) nr_congested=([0-9]*) nr_immediate=([0-9]*) nr_activate=([0-9]*) nr_ref_keep=([0-9]*) nr_unmap_fail=([0-9]*) priority=([0-9]*) flags=([A-Z_|]*)'; my $regex_lru_shrink_active_default = 'lru=([A-Z_]*) nr_scanned=([0-9]*) nr_rotated=([0-9]*) priority=([0-9]*)'; my $regex_writepage_default = 'page=([0-9a-f]*) pfn=([0-9]*) flags=([A-Z_|]*)'; @@ -205,15 +205,15 @@ $regex_wakeup_kswapd = generate_traceevent_regex( $regex_lru_isolate = generate_traceevent_regex( "vmscan/mm_vmscan_lru_isolate", $regex_lru_isolate_default, - "isolate_mode", "order", - "nr_requested", "nr_scanned", "nr_taken", - "file"); + "isolate_mode", "classzone_idx", "order", + "nr_requested", "nr_scanned", "nr_skipped", "nr_taken", + "lru"); $regex_lru_shrink_inactive = generate_traceevent_regex( "vmscan/mm_vmscan_lru_shrink_inactive", $regex_lru_shrink_inactive_default, - "nid", "zid", - "nr_scanned", "nr_reclaimed", "priority", - "flags"); + "nid", "nr_scanned", "nr_reclaimed", "nr_dirty", "nr_writeback", + "nr_congested", "nr_immediate", "nr_activate", "nr_ref_keep", + "nr_unmap_fail", "priority", "flags"); $regex_lru_shrink_active = generate_traceevent_regex( "vmscan/mm_vmscan_lru_shrink_active", $regex_lru_shrink_active_default, @@ -381,8 +381,8 @@ EVENT_PROCESS: next; } my $isolate_mode = $1; - my $nr_scanned = $4; - my $file = $6; + my $nr_scanned = $5; + my $file = $8; # To closer match vmstat scanning statistics, only count isolate_both # and isolate_inactive as scanning. isolate_active is rotation @@ -391,7 +391,7 @@ EVENT_PROCESS: # isolate_both == 3 if ($isolate_mode != 2) { $perprocesspid{$process_pid}->{HIGH_NR_SCANNED} += $nr_scanned; - if ($file == 1) { + if ($file =~ /_file/) { $perprocesspid{$process_pid}->{HIGH_NR_FILE_SCANNED} += $nr_scanned; } else { $perprocesspid{$process_pid}->{HIGH_NR_ANON_SCANNED} += $nr_scanned; @@ -406,8 +406,8 @@ EVENT_PROCESS: next; } - my $nr_reclaimed = $4; - my $flags = $6; + my $nr_reclaimed = $3; + my $flags = $12; my $file = 0; if ($flags =~ /RECLAIM_WB_FILE/) { $file = 1; diff --git a/Documentation/usb/gadget-testing.txt b/Documentation/usb/gadget-testing.txt index 581960574889..fb0cc4df1765 100644 --- a/Documentation/usb/gadget-testing.txt +++ b/Documentation/usb/gadget-testing.txt @@ -632,6 +632,8 @@ The uac2 function provides these attributes in its function directory: p_chmask - playback channel mask p_srate - playback sampling rate p_ssize - playback sample size (bytes) + req_number - the number of pre-allocated request for both capture + and playback The attributes have sane default values. diff --git a/Documentation/vfio-mediated-device.txt b/Documentation/vfio-mediated-device.txt index b38afec35edc..d226c7a5ba8b 100644 --- a/Documentation/vfio-mediated-device.txt +++ b/Documentation/vfio-mediated-device.txt @@ -127,22 +127,22 @@ the VFIO when devices are unbound from the driver. Physical Device Driver Interface -------------------------------- -The physical device driver interface provides the parent_ops[3] structure to -define the APIs to manage work in the mediated core driver that is related to -the physical device. +The physical device driver interface provides the mdev_parent_ops[3] structure +to define the APIs to manage work in the mediated core driver that is related +to the physical device. -The structures in the parent_ops structure are as follows: +The structures in the mdev_parent_ops structure are as follows: * dev_attr_groups: attributes of the parent device * mdev_attr_groups: attributes of the mediated device * supported_config: attributes to define supported configurations -The functions in the parent_ops structure are as follows: +The functions in the mdev_parent_ops structure are as follows: * create: allocate basic resources in a driver for a mediated device * remove: free resources in a driver when a mediated device is destroyed -The callbacks in the parent_ops structure are as follows: +The callbacks in the mdev_parent_ops structure are as follows: * open: open callback of mediated device * close: close callback of mediated device @@ -151,14 +151,14 @@ The callbacks in the parent_ops structure are as follows: * write: write emulation callback * mmap: mmap emulation callback -A driver should use the parent_ops structure in the function call to register -itself with the mdev core driver: +A driver should use the mdev_parent_ops structure in the function call to +register itself with the mdev core driver: extern int mdev_register_device(struct device *dev, - const struct parent_ops *ops); + const struct mdev_parent_ops *ops); -However, the parent_ops structure is not required in the function call that a -driver should use to unregister itself with the mdev core driver: +However, the mdev_parent_ops structure is not required in the function call +that a driver should use to unregister itself with the mdev core driver: extern void mdev_unregister_device(struct device *dev); @@ -223,6 +223,9 @@ Directories and files under the sysfs for Each Physical Device sprintf(buf, "%s-%s", dev_driver_string(parent->dev), group->name); + (or using mdev_parent_dev(mdev) to arrive at the parent device outside + of the core mdev code) + * device_api This attribute should show which device API is being created, for example, @@ -394,5 +397,5 @@ References [1] See Documentation/vfio.txt for more information on VFIO. [2] struct mdev_driver in include/linux/mdev.h -[3] struct parent_ops in include/linux/mdev.h +[3] struct mdev_parent_ops in include/linux/mdev.h [4] struct vfio_iommu_driver_ops in include/linux/vfio.h diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 03145b7cafaa..069450938b79 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -2061,6 +2061,8 @@ registers, find a list below: MIPS | KVM_REG_MIPS_LO | 64 MIPS | KVM_REG_MIPS_PC | 64 MIPS | KVM_REG_MIPS_CP0_INDEX | 32 + MIPS | KVM_REG_MIPS_CP0_ENTRYLO0 | 64 + MIPS | KVM_REG_MIPS_CP0_ENTRYLO1 | 64 MIPS | KVM_REG_MIPS_CP0_CONTEXT | 64 MIPS | KVM_REG_MIPS_CP0_USERLOCAL | 64 MIPS | KVM_REG_MIPS_CP0_PAGEMASK | 32 @@ -2071,9 +2073,11 @@ registers, find a list below: MIPS | KVM_REG_MIPS_CP0_ENTRYHI | 64 MIPS | KVM_REG_MIPS_CP0_COMPARE | 32 MIPS | KVM_REG_MIPS_CP0_STATUS | 32 + MIPS | KVM_REG_MIPS_CP0_INTCTL | 32 MIPS | KVM_REG_MIPS_CP0_CAUSE | 32 MIPS | KVM_REG_MIPS_CP0_EPC | 64 MIPS | KVM_REG_MIPS_CP0_PRID | 32 + MIPS | KVM_REG_MIPS_CP0_EBASE | 64 MIPS | KVM_REG_MIPS_CP0_CONFIG | 32 MIPS | KVM_REG_MIPS_CP0_CONFIG1 | 32 MIPS | KVM_REG_MIPS_CP0_CONFIG2 | 32 @@ -2148,6 +2152,12 @@ patterns depending on whether they're 32-bit or 64-bit registers: 0x7020 0000 0001 00 <reg:5> <sel:3> (32-bit) 0x7030 0000 0001 00 <reg:5> <sel:3> (64-bit) +Note: KVM_REG_MIPS_CP0_ENTRYLO0 and KVM_REG_MIPS_CP0_ENTRYLO1 are the MIPS64 +versions of the EntryLo registers regardless of the word size of the host +hardware, host kernel, guest, and whether XPA is present in the guest, i.e. +with the RI and XI bits (if they exist) in bits 63 and 62 respectively, and +the PFNX field starting at bit 30. + MIPS KVM control registers (see above) have the following id bit patterns: 0x7030 0000 0002 <reg:16> @@ -2443,18 +2453,20 @@ are, it will do nothing and return an EBUSY error. The parameter is a pointer to a 32-bit unsigned integer variable containing the order (log base 2) of the desired size of the hash table, which must be between 18 and 46. On successful return from the -ioctl, it will have been updated with the order of the hash table that -was allocated. +ioctl, the value will not be changed by the kernel. If no hash table has been allocated when any vcpu is asked to run (with the KVM_RUN ioctl), the host kernel will allocate a default-sized hash table (16 MB). If this ioctl is called when a hash table has already been allocated, -the kernel will clear out the existing hash table (zero all HPTEs) and -return the hash table order in the parameter. (If the guest is using -the virtualized real-mode area (VRMA) facility, the kernel will -re-create the VMRA HPTEs on the next KVM_RUN of any vcpu.) +with a different order from the existing hash table, the existing hash +table will be freed and a new one allocated. If this is ioctl is +called when a hash table has already been allocated of the same order +as specified, the kernel will clear out the existing hash table (zero +all HPTEs). In either case, if the guest is using the virtualized +real-mode area (VRMA) facility, the kernel will re-create the VMRA +HPTEs on the next KVM_RUN of any vcpu. 4.77 KVM_S390_INTERRUPT @@ -3177,7 +3189,7 @@ of IOMMU pages. The rest of functionality is identical to KVM_CREATE_SPAPR_TCE. -4.98 KVM_REINJECT_CONTROL +4.99 KVM_REINJECT_CONTROL Capability: KVM_CAP_REINJECT_CONTROL Architectures: x86 @@ -3201,6 +3213,166 @@ struct kvm_reinject_control { pit_reinject = 0 (!reinject mode) is recommended, unless running an old operating system that uses the PIT for timing (e.g. Linux 2.4.x). +4.100 KVM_PPC_CONFIGURE_V3_MMU + +Capability: KVM_CAP_PPC_RADIX_MMU or KVM_CAP_PPC_HASH_MMU_V3 +Architectures: ppc +Type: vm ioctl +Parameters: struct kvm_ppc_mmuv3_cfg (in) +Returns: 0 on success, + -EFAULT if struct kvm_ppc_mmuv3_cfg cannot be read, + -EINVAL if the configuration is invalid + +This ioctl controls whether the guest will use radix or HPT (hashed +page table) translation, and sets the pointer to the process table for +the guest. + +struct kvm_ppc_mmuv3_cfg { + __u64 flags; + __u64 process_table; +}; + +There are two bits that can be set in flags; KVM_PPC_MMUV3_RADIX and +KVM_PPC_MMUV3_GTSE. KVM_PPC_MMUV3_RADIX, if set, configures the guest +to use radix tree translation, and if clear, to use HPT translation. +KVM_PPC_MMUV3_GTSE, if set and if KVM permits it, configures the guest +to be able to use the global TLB and SLB invalidation instructions; +if clear, the guest may not use these instructions. + +The process_table field specifies the address and size of the guest +process table, which is in the guest's space. This field is formatted +as the second doubleword of the partition table entry, as defined in +the Power ISA V3.00, Book III section 5.7.6.1. + +4.101 KVM_PPC_GET_RMMU_INFO + +Capability: KVM_CAP_PPC_RADIX_MMU +Architectures: ppc +Type: vm ioctl +Parameters: struct kvm_ppc_rmmu_info (out) +Returns: 0 on success, + -EFAULT if struct kvm_ppc_rmmu_info cannot be written, + -EINVAL if no useful information can be returned + +This ioctl returns a structure containing two things: (a) a list +containing supported radix tree geometries, and (b) a list that maps +page sizes to put in the "AP" (actual page size) field for the tlbie +(TLB invalidate entry) instruction. + +struct kvm_ppc_rmmu_info { + struct kvm_ppc_radix_geom { + __u8 page_shift; + __u8 level_bits[4]; + __u8 pad[3]; + } geometries[8]; + __u32 ap_encodings[8]; +}; + +The geometries[] field gives up to 8 supported geometries for the +radix page table, in terms of the log base 2 of the smallest page +size, and the number of bits indexed at each level of the tree, from +the PTE level up to the PGD level in that order. Any unused entries +will have 0 in the page_shift field. + +The ap_encodings gives the supported page sizes and their AP field +encodings, encoded with the AP value in the top 3 bits and the log +base 2 of the page size in the bottom 6 bits. + +4.102 KVM_PPC_RESIZE_HPT_PREPARE + +Capability: KVM_CAP_SPAPR_RESIZE_HPT +Architectures: powerpc +Type: vm ioctl +Parameters: struct kvm_ppc_resize_hpt (in) +Returns: 0 on successful completion, + >0 if a new HPT is being prepared, the value is an estimated + number of milliseconds until preparation is complete + -EFAULT if struct kvm_reinject_control cannot be read, + -EINVAL if the supplied shift or flags are invalid + -ENOMEM if unable to allocate the new HPT + -ENOSPC if there was a hash collision when moving existing + HPT entries to the new HPT + -EIO on other error conditions + +Used to implement the PAPR extension for runtime resizing of a guest's +Hashed Page Table (HPT). Specifically this starts, stops or monitors +the preparation of a new potential HPT for the guest, essentially +implementing the H_RESIZE_HPT_PREPARE hypercall. + +If called with shift > 0 when there is no pending HPT for the guest, +this begins preparation of a new pending HPT of size 2^(shift) bytes. +It then returns a positive integer with the estimated number of +milliseconds until preparation is complete. + +If called when there is a pending HPT whose size does not match that +requested in the parameters, discards the existing pending HPT and +creates a new one as above. + +If called when there is a pending HPT of the size requested, will: + * If preparation of the pending HPT is already complete, return 0 + * If preparation of the pending HPT has failed, return an error + code, then discard the pending HPT. + * If preparation of the pending HPT is still in progress, return an + estimated number of milliseconds until preparation is complete. + +If called with shift == 0, discards any currently pending HPT and +returns 0 (i.e. cancels any in-progress preparation). + +flags is reserved for future expansion, currently setting any bits in +flags will result in an -EINVAL. + +Normally this will be called repeatedly with the same parameters until +it returns <= 0. The first call will initiate preparation, subsequent +ones will monitor preparation until it completes or fails. + +struct kvm_ppc_resize_hpt { + __u64 flags; + __u32 shift; + __u32 pad; +}; + +4.103 KVM_PPC_RESIZE_HPT_COMMIT + +Capability: KVM_CAP_SPAPR_RESIZE_HPT +Architectures: powerpc +Type: vm ioctl +Parameters: struct kvm_ppc_resize_hpt (in) +Returns: 0 on successful completion, + -EFAULT if struct kvm_reinject_control cannot be read, + -EINVAL if the supplied shift or flags are invalid + -ENXIO is there is no pending HPT, or the pending HPT doesn't + have the requested size + -EBUSY if the pending HPT is not fully prepared + -ENOSPC if there was a hash collision when moving existing + HPT entries to the new HPT + -EIO on other error conditions + +Used to implement the PAPR extension for runtime resizing of a guest's +Hashed Page Table (HPT). Specifically this requests that the guest be +transferred to working with the new HPT, essentially implementing the +H_RESIZE_HPT_COMMIT hypercall. + +This should only be called after KVM_PPC_RESIZE_HPT_PREPARE has +returned 0 with the same parameters. In other cases +KVM_PPC_RESIZE_HPT_COMMIT will return an error (usually -ENXIO or +-EBUSY, though others may be possible if the preparation was started, +but failed). + +This will have undefined effects on the guest if it has not already +placed itself in a quiescent state where no vcpu will make MMU enabled +memory accesses. + +On succsful completion, the pending HPT will become the guest's active +HPT and the previous HPT will be discarded. + +On failure, the guest will still be operating on its previous HPT. + +struct kvm_ppc_resize_hpt { + __u64 flags; + __u32 shift; + __u32 pad; +}; + 5. The kvm_run structure ------------------------ @@ -3217,7 +3389,18 @@ struct kvm_run { Request that KVM_RUN return when it becomes possible to inject external interrupts into the guest. Useful in conjunction with KVM_INTERRUPT. - __u8 padding1[7]; + __u8 immediate_exit; + +This field is polled once when KVM_RUN starts; if non-zero, KVM_RUN +exits immediately, returning -EINTR. In the common scenario where a +signal is used to "kick" a VCPU out of KVM_RUN, this field can be used +to avoid usage of KVM_SET_SIGNAL_MASK, which has worse scalability. +Rather than blocking the signal outside KVM_RUN, userspace can set up +a signal handler that sets run->immediate_exit to a non-zero value. + +This field is ignored if KVM_CAP_IMMEDIATE_EXIT is not available. + + __u8 padding1[6]; /* out */ __u32 exit_reason; @@ -3942,3 +4125,21 @@ In order to use SynIC, it has to be activated by setting this capability via KVM_ENABLE_CAP ioctl on the vcpu fd. Note that this will disable the use of APIC hardware virtualization even if supported by the CPU, as it's incompatible with SynIC auto-EOI behavior. + +8.3 KVM_CAP_PPC_RADIX_MMU + +Architectures: ppc + +This capability, if KVM_CHECK_EXTENSION indicates that it is +available, means that that the kernel can support guests using the +radix MMU defined in Power ISA V3.00 (as implemented in the POWER9 +processor). + +8.4 KVM_CAP_PPC_HASH_MMU_V3 + +Architectures: ppc + +This capability, if KVM_CHECK_EXTENSION indicates that it is +available, means that that the kernel can support guests using the +hashed page table MMU defined in Power ISA V3.00 (as implemented in +the POWER9 processor), including in-memory segment tables. diff --git a/Documentation/virtual/kvm/devices/arm-vgic-v3.txt b/Documentation/virtual/kvm/devices/arm-vgic-v3.txt index 9348b3caccd7..c1a24612c198 100644 --- a/Documentation/virtual/kvm/devices/arm-vgic-v3.txt +++ b/Documentation/virtual/kvm/devices/arm-vgic-v3.txt @@ -118,7 +118,7 @@ Groups: -EBUSY: One or more VCPUs are running - KVM_DEV_ARM_VGIC_CPU_SYSREGS + KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS Attributes: The attr field of kvm_device_attr encodes two values: bits: | 63 .... 32 | 31 .... 16 | 15 .... 0 | @@ -139,13 +139,15 @@ Groups: All system regs accessed through this API are (rw, 64-bit) and kvm_device_attr.addr points to a __u64 value. - KVM_DEV_ARM_VGIC_CPU_SYSREGS accesses the CPU interface registers for the + KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS accesses the CPU interface registers for the CPU specified by the mpidr field. + CPU interface registers access is not implemented for AArch32 mode. + Error -ENXIO is returned when accessed in AArch32 mode. Errors: -ENXIO: Getting or setting this register is not yet supported -EBUSY: VCPU is running - -EINVAL: Invalid mpidr supplied + -EINVAL: Invalid mpidr or register value supplied KVM_DEV_ARM_VGIC_GRP_NR_IRQS @@ -204,3 +206,6 @@ Groups: architecture defined MPIDR, and the field is encoded as follows: | 63 .... 56 | 55 .... 48 | 47 .... 40 | 39 .... 32 | | Aff3 | Aff2 | Aff1 | Aff0 | + Errors: + -EINVAL: vINTID is not multiple of 32 or + info field is not VGIC_LEVEL_INFO_LINE_LEVEL diff --git a/Documentation/virtual/kvm/hypercalls.txt b/Documentation/virtual/kvm/hypercalls.txt index c8d040e27046..feaaa634f154 100644 --- a/Documentation/virtual/kvm/hypercalls.txt +++ b/Documentation/virtual/kvm/hypercalls.txt @@ -81,3 +81,38 @@ the vcpu to sleep until occurrence of an appropriate event. Another vcpu of the same guest can wakeup the sleeping vcpu by issuing KVM_HC_KICK_CPU hypercall, specifying APIC ID (a1) of the vcpu to be woken up. An additional argument (a0) is used in the hypercall for future use. + + +6. KVM_HC_CLOCK_PAIRING +------------------------ +Architecture: x86 +Status: active +Purpose: Hypercall used to synchronize host and guest clocks. +Usage: + +a0: guest physical address where host copies +"struct kvm_clock_offset" structure. + +a1: clock_type, ATM only KVM_CLOCK_PAIRING_WALLCLOCK (0) +is supported (corresponding to the host's CLOCK_REALTIME clock). + + struct kvm_clock_pairing { + __s64 sec; + __s64 nsec; + __u64 tsc; + __u32 flags; + __u32 pad[9]; + }; + + Where: + * sec: seconds from clock_type clock. + * nsec: nanoseconds from clock_type clock. + * tsc: guest TSC value used to calculate sec/nsec pair + * flags: flags, unused (0) at the moment. + +The hypercall lets a guest compute a precise timestamp across +host and guest. The guest can use the returned TSC value to +compute the CLOCK_REALTIME for its clock, at the same instant. + +Returns KVM_EOPNOTSUPP if the host does not use TSC clocksource, +or if clock type is different than KVM_CLOCK_PAIRING_WALLCLOCK. diff --git a/Documentation/virtual/kvm/locking.txt b/Documentation/virtual/kvm/locking.txt index fd013bf4115b..1bb8bcaf8497 100644 --- a/Documentation/virtual/kvm/locking.txt +++ b/Documentation/virtual/kvm/locking.txt @@ -26,9 +26,16 @@ sections. Fast page fault: Fast page fault is the fast path which fixes the guest page fault out of -the mmu-lock on x86. Currently, the page fault can be fast only if the -shadow page table is present and it is caused by write-protect, that means -we just need change the W bit of the spte. +the mmu-lock on x86. Currently, the page fault can be fast in one of the +following two cases: + +1. Access Tracking: The SPTE is not present, but it is marked for access +tracking i.e. the SPTE_SPECIAL_MASK is set. That means we need to +restore the saved R/X bits. This is described in more detail later below. + +2. Write-Protection: The SPTE is present and the fault is +caused by write-protect. That means we just need to change the W bit of the +spte. What we use to avoid all the race is the SPTE_HOST_WRITEABLE bit and SPTE_MMU_WRITEABLE bit on the spte: @@ -38,7 +45,8 @@ SPTE_MMU_WRITEABLE bit on the spte: page write-protection. On fast page fault path, we will use cmpxchg to atomically set the spte W -bit if spte.SPTE_HOST_WRITEABLE = 1 and spte.SPTE_WRITE_PROTECT = 1, this +bit if spte.SPTE_HOST_WRITEABLE = 1 and spte.SPTE_WRITE_PROTECT = 1, or +restore the saved R/X bits if VMX_EPT_TRACK_ACCESS mask is set, or both. This is safe because whenever changing these bits can be detected by cmpxchg. But we need carefully check these cases: @@ -142,6 +150,21 @@ Since the spte is "volatile" if it can be updated out of mmu-lock, we always atomically update the spte, the race caused by fast page fault can be avoided, See the comments in spte_has_volatile_bits() and mmu_spte_update(). +Lockless Access Tracking: + +This is used for Intel CPUs that are using EPT but do not support the EPT A/D +bits. In this case, when the KVM MMU notifier is called to track accesses to a +page (via kvm_mmu_notifier_clear_flush_young), it marks the PTE as not-present +by clearing the RWX bits in the PTE and storing the original R & X bits in +some unused/ignored bits. In addition, the SPTE_SPECIAL_MASK is also set on the +PTE (using the ignored bit 62). When the VM tries to access the page later on, +a fault is generated and the fast page fault mechanism described above is used +to atomically restore the PTE to a Present state. The W bit is not saved when +the PTE is marked for access tracking and during restoration to the Present +state, the W bit is set depending on whether or not it was a write access. If +it wasn't, then the W bit will remain clear until a write access happens, at +which time it will be set using the Dirty tracking mechanism described above. + 3. Reference ------------ diff --git a/Documentation/vm/ksm.txt b/Documentation/vm/ksm.txt index f34a8ee6f860..6b0ca7feb135 100644 --- a/Documentation/vm/ksm.txt +++ b/Documentation/vm/ksm.txt @@ -38,6 +38,10 @@ the range for whenever the KSM daemon is started; even if the range cannot contain any pages which KSM could actually merge; even if MADV_UNMERGEABLE is applied to a range which was never MADV_MERGEABLE. +If a region of memory must be split into at least one new MADV_MERGEABLE +or MADV_UNMERGEABLE region, the madvise may return ENOMEM if the process +will exceed vm.max_map_count (see Documentation/sysctl/vm.txt). + Like other madvise calls, they are intended for use on mapped areas of the user address space: they will report ENOMEM if the specified range includes unmapped gaps (though working on the intervening mapped areas), @@ -80,6 +84,20 @@ run - set 0 to stop ksmd from running but keep merged pages, Default: 0 (must be changed to 1 to activate KSM, except if CONFIG_SYSFS is disabled) +use_zero_pages - specifies whether empty pages (i.e. allocated pages + that only contain zeroes) should be treated specially. + When set to 1, empty pages are merged with the kernel + zero page(s) instead of with each other as it would + happen normally. This can improve the performance on + architectures with coloured zero pages, depending on + the workload. Care should be taken when enabling this + setting, as it can potentially degrade the performance + of KSM for some workloads, for example if the checksums + of pages candidate for merging match the checksum of + an empty page. This setting can be changed at any time, + it is only effective for pages merged after the change. + Default: 0 (normal KSM behaviour as in earlier releases) + The effectiveness of KSM and MADV_MERGEABLE is shown in /sys/kernel/mm/ksm/: pages_shared - how many shared pages are being used diff --git a/Documentation/vm/page_frags b/Documentation/vm/page_frags new file mode 100644 index 000000000000..a6714565dbf9 --- /dev/null +++ b/Documentation/vm/page_frags @@ -0,0 +1,42 @@ +Page fragments +-------------- + +A page fragment is an arbitrary-length arbitrary-offset area of memory +which resides within a 0 or higher order compound page. Multiple +fragments within that page are individually refcounted, in the page's +reference counter. + +The page_frag functions, page_frag_alloc and page_frag_free, provide a +simple allocation framework for page fragments. This is used by the +network stack and network device drivers to provide a backing region of +memory for use as either an sk_buff->head, or to be used in the "frags" +portion of skb_shared_info. + +In order to make use of the page fragment APIs a backing page fragment +cache is needed. This provides a central point for the fragment allocation +and tracks allows multiple calls to make use of a cached page. The +advantage to doing this is that multiple calls to get_page can be avoided +which can be expensive at allocation time. However due to the nature of +this caching it is required that any calls to the cache be protected by +either a per-cpu limitation, or a per-cpu limitation and forcing interrupts +to be disabled when executing the fragment allocation. + +The network stack uses two separate caches per CPU to handle fragment +allocation. The netdev_alloc_cache is used by callers making use of the +__netdev_alloc_frag and __netdev_alloc_skb calls. The napi_alloc_cache is +used by callers of the __napi_alloc_frag and __napi_alloc_skb calls. The +main difference between these two calls is the context in which they may be +called. The "netdev" prefixed functions are usable in any context as these +functions will disable interrupts, while the "napi" prefixed functions are +only usable within the softirq context. + +Many network device drivers use a similar methodology for allocating page +fragments, but the page fragments are cached at the ring or descriptor +level. In order to enable these cases it is necessary to provide a generic +way of tearing down a page cache. For this reason __page_frag_cache_drain +was implemented. It allows for freeing multiple references from a single +page via a single call. The advantage to doing this is that it allows for +cleaning up the multiple references that were added to a page in order to +avoid calling get_page per allocation. + +Alexander Duyck, Nov 29, 2016. diff --git a/Documentation/vm/transhuge.txt b/Documentation/vm/transhuge.txt index f2e739545e74..cd28d5ee5273 100644 --- a/Documentation/vm/transhuge.txt +++ b/Documentation/vm/transhuge.txt @@ -110,6 +110,7 @@ MADV_HUGEPAGE region. echo always >/sys/kernel/mm/transparent_hugepage/defrag echo defer >/sys/kernel/mm/transparent_hugepage/defrag +echo defer+madvise >/sys/kernel/mm/transparent_hugepage/defrag echo madvise >/sys/kernel/mm/transparent_hugepage/defrag echo never >/sys/kernel/mm/transparent_hugepage/defrag @@ -120,10 +121,15 @@ that benefit heavily from THP use and are willing to delay the VM start to utilise them. "defer" means that an application will wake kswapd in the background -to reclaim pages and wake kcompact to compact memory so that THP is +to reclaim pages and wake kcompactd to compact memory so that THP is available in the near future. It's the responsibility of khugepaged to then install the THP pages later. +"defer+madvise" will enter direct reclaim and compaction like "always", but +only for regions that have used madvise(MADV_HUGEPAGE); all other regions +will wake kswapd in the background to reclaim pages and wake kcompactd to +compact memory so that THP is available in the near future. + "madvise" will enter direct reclaim like "always" but only for regions that are have used madvise(MADV_HUGEPAGE). This is the default behaviour. diff --git a/Documentation/vm/userfaultfd.txt b/Documentation/vm/userfaultfd.txt index 70a3c94d1941..0e5543a920e5 100644 --- a/Documentation/vm/userfaultfd.txt +++ b/Documentation/vm/userfaultfd.txt @@ -54,6 +54,26 @@ uffdio_api.features and uffdio_api.ioctls two 64bit bitmasks of respectively all the available features of the read(2) protocol and the generic ioctl available. +The uffdio_api.features bitmask returned by the UFFDIO_API ioctl +defines what memory types are supported by the userfaultfd and what +events, except page fault notifications, may be generated. + +If the kernel supports registering userfaultfd ranges on hugetlbfs +virtual memory areas, UFFD_FEATURE_MISSING_HUGETLBFS will be set in +uffdio_api.features. Similarly, UFFD_FEATURE_MISSING_SHMEM will be +set if the kernel supports registering userfaultfd ranges on shared +memory (covering all shmem APIs, i.e. tmpfs, IPCSHM, /dev/zero +MAP_SHARED, memfd_create, etc). + +The userland application that wants to use userfaultfd with hugetlbfs +or shared memory need to set the corresponding flag in +uffdio_api.features to enable those features. + +If the userland desires to receive notifications for events other than +page faults, it has to verify that uffdio_api.features has appropriate +UFFD_FEATURE_EVENT_* bits set. These events are described in more +detail below in "Non-cooperative userfaultfd" section. + Once the userfaultfd has been enabled the UFFDIO_REGISTER ioctl should be invoked (if present in the returned uffdio_api.ioctls bitmask) to register a memory range in the userfaultfd by setting the @@ -129,7 +149,7 @@ migration thread in the QEMU running in the destination node will receive the page that triggered the userfault and it'll map it as usual with the UFFDIO_COPY|ZEROPAGE (without actually knowing if it was spontaneously sent by the source or if it was an urgent page -requested through an userfault). +requested through a userfault). By the time the userfaults start, the QEMU in the destination node doesn't need to keep any per-page state bitmap relative to the live @@ -142,3 +162,72 @@ course the bitmap is updated accordingly. It's also useful to avoid sending the same page twice (in case the userfault is read by the postcopy thread just before UFFDIO_COPY|ZEROPAGE runs in the migration thread). + +== Non-cooperative userfaultfd == + +When the userfaultfd is monitored by an external manager, the manager +must be able to track changes in the process virtual memory +layout. Userfaultfd can notify the manager about such changes using +the same read(2) protocol as for the page fault notifications. The +manager has to explicitly enable these events by setting appropriate +bits in uffdio_api.features passed to UFFDIO_API ioctl: + +UFFD_FEATURE_EVENT_EXIT - enable notification about exit() of the +non-cooperative process. When the monitored process exits, the uffd +manager will get UFFD_EVENT_EXIT. + +UFFD_FEATURE_EVENT_FORK - enable userfaultfd hooks for fork(). When +this feature is enabled, the userfaultfd context of the parent process +is duplicated into the newly created process. The manager receives +UFFD_EVENT_FORK with file descriptor of the new userfaultfd context in +the uffd_msg.fork. + +UFFD_FEATURE_EVENT_REMAP - enable notifications about mremap() +calls. When the non-cooperative process moves a virtual memory area to +a different location, the manager will receive UFFD_EVENT_REMAP. The +uffd_msg.remap will contain the old and new addresses of the area and +its original length. + +UFFD_FEATURE_EVENT_REMOVE - enable notifications about +madvise(MADV_REMOVE) and madvise(MADV_DONTNEED) calls. The event +UFFD_EVENT_REMOVE will be generated upon these calls to madvise. The +uffd_msg.remove will contain start and end addresses of the removed +area. + +UFFD_FEATURE_EVENT_UNMAP - enable notifications about memory +unmapping. The manager will get UFFD_EVENT_UNMAP with uffd_msg.remove +containing start and end addresses of the unmapped area. + +Although the UFFD_FEATURE_EVENT_REMOVE and UFFD_FEATURE_EVENT_UNMAP +are pretty similar, they quite differ in the action expected from the +userfaultfd manager. In the former case, the virtual memory is +removed, but the area is not, the area remains monitored by the +userfaultfd, and if a page fault occurs in that area it will be +delivered to the manager. The proper resolution for such page fault is +to zeromap the faulting address. However, in the latter case, when an +area is unmapped, either explicitly (with munmap() system call), or +implicitly (e.g. during mremap()), the area is removed and in turn the +userfaultfd context for such area disappears too and the manager will +not get further userland page faults from the removed area. Still, the +notification is required in order to prevent manager from using +UFFDIO_COPY on the unmapped area. + +Unlike userland page faults which have to be synchronous and require +explicit or implicit wakeup, all the events are delivered +asynchronously and the non-cooperative process resumes execution as +soon as manager executes read(). The userfaultfd manager should +carefully synchronize calls to UFFDIO_COPY with the events +processing. To aid the synchronization, the UFFDIO_COPY ioctl will +return -ENOSPC when the monitored process exits at the time of +UFFDIO_COPY, and -ENOENT, when the non-cooperative process has changed +its virtual memory layout simultaneously with outstanding UFFDIO_COPY +operation. + +The current asynchronous model of the event delivery is optimal for +single threaded non-cooperative userfaultfd manager implementations. A +synchronous event delivery model can be added later as a new +userfaultfd feature to facilitate multithreading enhancements of the +non cooperative manager, for example to allow UFFDIO_COPY ioctls to +run in parallel to the event reception. Single threaded +implementations should continue to use the current async event +delivery model instead. diff --git a/Documentation/watchdog/watchdog-kernel-api.txt b/Documentation/watchdog/watchdog-kernel-api.txt index ea277478982f..9b93953f69cf 100644 --- a/Documentation/watchdog/watchdog-kernel-api.txt +++ b/Documentation/watchdog/watchdog-kernel-api.txt @@ -280,6 +280,12 @@ To disable the watchdog on reboot, the user must call the following helper: static inline void watchdog_stop_on_reboot(struct watchdog_device *wdd); +To disable the watchdog when unregistering the watchdog, the user must call +the following helper. Note that this will only stop the watchdog if the +nowayout flag is not set. + +static inline void watchdog_stop_on_unregister(struct watchdog_device *wdd); + To change the priority of the restart handler the following helper should be used: diff --git a/Documentation/watchdog/watchdog-parameters.txt b/Documentation/watchdog/watchdog-parameters.txt index e21850e270a0..4f7d86dd0a5d 100644 --- a/Documentation/watchdog/watchdog-parameters.txt +++ b/Documentation/watchdog/watchdog-parameters.txt @@ -209,6 +209,11 @@ timeout: Initial watchdog timeout in seconds (0<timeout<516, default=60) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- +nic7018_wdt: +timeout: Initial watchdog timeout in seconds (0<timeout<464, default=80) +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- nuc900_wdt: heartbeat: Watchdog heartbeats in seconds. (default = 15) diff --git a/Documentation/x86/intel_rdt_ui.txt b/Documentation/x86/intel_rdt_ui.txt index d918d268cd72..51cf6fa5591f 100644 --- a/Documentation/x86/intel_rdt_ui.txt +++ b/Documentation/x86/intel_rdt_ui.txt @@ -212,3 +212,117 @@ Finally we move core 4-7 over to the new group and make sure that the kernel and the tasks running there get 50% of the cache. # echo C0 > p0/cpus + +4) Locking between applications + +Certain operations on the resctrl filesystem, composed of read/writes +to/from multiple files, must be atomic. + +As an example, the allocation of an exclusive reservation of L3 cache +involves: + + 1. Read the cbmmasks from each directory + 2. Find a contiguous set of bits in the global CBM bitmask that is clear + in any of the directory cbmmasks + 3. Create a new directory + 4. Set the bits found in step 2 to the new directory "schemata" file + +If two applications attempt to allocate space concurrently then they can +end up allocating the same bits so the reservations are shared instead of +exclusive. + +To coordinate atomic operations on the resctrlfs and to avoid the problem +above, the following locking procedure is recommended: + +Locking is based on flock, which is available in libc and also as a shell +script command + +Write lock: + + A) Take flock(LOCK_EX) on /sys/fs/resctrl + B) Read/write the directory structure. + C) funlock + +Read lock: + + A) Take flock(LOCK_SH) on /sys/fs/resctrl + B) If success read the directory structure. + C) funlock + +Example with bash: + +# Atomically read directory structure +$ flock -s /sys/fs/resctrl/ find /sys/fs/resctrl + +# Read directory contents and create new subdirectory + +$ cat create-dir.sh +find /sys/fs/resctrl/ > output.txt +mask = function-of(output.txt) +mkdir /sys/fs/resctrl/newres/ +echo mask > /sys/fs/resctrl/newres/schemata + +$ flock /sys/fs/resctrl/ ./create-dir.sh + +Example with C: + +/* + * Example code do take advisory locks + * before accessing resctrl filesystem + */ +#include <sys/file.h> +#include <stdlib.h> + +void resctrl_take_shared_lock(int fd) +{ + int ret; + + /* take shared lock on resctrl filesystem */ + ret = flock(fd, LOCK_SH); + if (ret) { + perror("flock"); + exit(-1); + } +} + +void resctrl_take_exclusive_lock(int fd) +{ + int ret; + + /* release lock on resctrl filesystem */ + ret = flock(fd, LOCK_EX); + if (ret) { + perror("flock"); + exit(-1); + } +} + +void resctrl_release_lock(int fd) +{ + int ret; + + /* take shared lock on resctrl filesystem */ + ret = flock(fd, LOCK_UN); + if (ret) { + perror("flock"); + exit(-1); + } +} + +void main(void) +{ + int fd, ret; + + fd = open("/sys/fs/resctrl", O_DIRECTORY); + if (fd == -1) { + perror("open"); + exit(-1); + } + resctrl_take_shared_lock(fd); + /* code to read directory contents */ + resctrl_release_lock(fd); + + resctrl_take_exclusive_lock(fd); + /* code to read and write directory contents */ + resctrl_release_lock(fd); +} diff --git a/Documentation/x86/zero-page.txt b/Documentation/x86/zero-page.txt index 95a4d34af3fd..b8527c6b7646 100644 --- a/Documentation/x86/zero-page.txt +++ b/Documentation/x86/zero-page.txt @@ -31,6 +31,8 @@ Offset Proto Name Meaning 1E9/001 ALL eddbuf_entries Number of entries in eddbuf (below) 1EA/001 ALL edd_mbr_sig_buf_entries Number of entries in edd_mbr_sig_buffer (below) +1EB/001 ALL kbd_status Numlock is enabled +1EC/001 ALL secure_boot Secure boot is enabled in the firmware 1EF/001 ALL sentinel Used to detect broken bootloaders 290/040 ALL edd_mbr_sig_buffer EDD MBR signatures 2D0/A00 ALL e820_map E820 memory map table |
