diff options
| -rw-r--r-- | scripts/gen_initramfs_list.sh | 225 | ||||
| -rw-r--r-- | usr/Makefile | 91 |
2 files changed, 189 insertions, 127 deletions
diff --git a/scripts/gen_initramfs_list.sh b/scripts/gen_initramfs_list.sh index 6d411169bfa6..56b3bed1108f 100644 --- a/scripts/gen_initramfs_list.sh +++ b/scripts/gen_initramfs_list.sh @@ -1,22 +1,55 @@ #!/bin/bash # Copyright (C) Martin Schlemmer <azarah@nosferatu.za.org> -# Released under the terms of the GNU GPL -# -# Generate a newline separated list of entries from the file/directory -# supplied as an argument. -# -# If a file/directory is not supplied then generate a small dummy file. +# Copyright (c) 2006 Sam Ravnborg <sam@ravnborg.org> # -# The output is suitable for gen_init_cpio built from usr/gen_init_cpio.c. +# Released under the terms of the GNU GPL # +# Generate a cpio packed initramfs. It uses gen_init_cpio to generate +# the cpio archive, and gzip to pack it. +# The script may also be used to generate the inputfile used for gen_init_cpio +# This script assumes that gen_init_cpio is located in usr/ directory + +# error out on errors +set -e + +usage() { +cat << EOF +Usage: +$0 [-o <file>] [-u <uid>] [-g <gid>] {-d | <cpio_source>} ... + -o <file> Create gzipped initramfs file named <file> using + gen_init_cpio and gzip + -u <uid> User ID to map to user ID 0 (root). + <uid> is only meaningful if <cpio_source> + is a directory. + -g <gid> Group ID to map to group ID 0 (root). + <gid> is only meaningful if <cpio_source> + is a directory. + <cpio_source> File list or directory for cpio archive. + If <cpio_source> is a .cpio file it will be used + as direct input to initramfs. + -d Output the default cpio list. + +All options except -o and -l may be repeated and are interpreted +sequentially and immediately. -u and -g states are preserved across +<cpio_source> options so an explicit "-u 0 -g 0" is required +to reset the root/group mapping. +EOF +} + +list_default_initramfs() { + # echo usr/kinit/kinit + : +} default_initramfs() { - cat <<-EOF + cat <<-EOF >> ${output} # This is a very simple, default initramfs dir /dev 0755 0 0 nod /dev/console 0600 0 0 c 5 1 dir /root 0700 0 0 + # file /kinit usr/kinit/kinit 0755 0 0 + # slink /init kinit 0755 0 0 EOF } @@ -42,18 +75,28 @@ filetype() { return 0 } +list_print_mtime() { + : +} + print_mtime() { - local argv1="$1" local my_mtime="0" - if [ -e "${argv1}" ]; then - my_mtime=$(find "${argv1}" -printf "%T@\n" | sort -r | head -n 1) + if [ -e "$1" ]; then + my_mtime=$(find "$1" -printf "%T@\n" | sort -r | head -n 1) fi - - echo "# Last modified: ${my_mtime}" - echo + + echo "# Last modified: ${my_mtime}" >> ${output} + echo "" >> ${output} +} + +list_parse() { + echo "$1 \\" } +# for each file print a line in following format +# <filetype> <name> <path to file> <octal mode> <uid> <gid> +# for links, devices etc the format differs. See gen_init_cpio for details parse() { local location="$1" local name="${location/${srcdir}//}" @@ -99,80 +142,112 @@ parse() { ;; esac - echo "${str}" + echo "${str}" >> ${output} return 0 } -usage() { - printf "Usage:\n" - printf "$0 [ [-u <root_uid>] [-g <root_gid>] [-d | <cpio_source>] ] . . .\n" - printf "\n" - printf -- "-u <root_uid> User ID to map to user ID 0 (root).\n" - printf " <root_uid> is only meaningful if <cpio_source>\n" - printf " is a directory.\n" - printf -- "-g <root_gid> Group ID to map to group ID 0 (root).\n" - printf " <root_gid> is only meaningful if <cpio_source>\n" - printf " is a directory.\n" - printf "<cpio_source> File list or directory for cpio archive.\n" - printf " If <cpio_source> is not provided then a\n" - printf " a default list will be output.\n" - printf -- "-d Output the default cpio list. If no <cpio_source>\n" - printf " is given then the default cpio list will be output.\n" - printf "\n" - printf "All options may be repeated and are interpreted sequentially\n" - printf "and immediately. -u and -g states are preserved across\n" - printf "<cpio_source> options so an explicit \"-u 0 -g 0\" is required\n" - printf "to reset the root/group mapping.\n" +unknown_option() { + printf "ERROR: unknown option \"$arg\"\n" >&2 + printf "If the filename validly begins with '-', " >&2 + printf "then it must be prefixed\n" >&2 + printf "by './' so that it won't be interpreted as an option." >&2 + printf "\n" >&2 + usage >&2 + exit 1 +} + +list_header() { + echo "deps_initramfs := \\" +} + +header() { + printf "\n#####################\n# $1\n" >> ${output} +} + +# process one directory (incl sub-directories) +dir_filelist() { + ${dep_list}header "$1" + + srcdir=$(echo "$1" | sed -e 's://*:/:g') + dirlist=$(find "${srcdir}" -printf "%p %m %U %G\n" 2>/dev/null) + + # If $dirlist is only one line, then the directory is empty + if [ "$(echo "${dirlist}" | wc -l)" -gt 1 ]; then + ${dep_list}print_mtime "$1" + + echo "${dirlist}" | \ + while read x; do + ${dep_list}parse ${x} + done + fi } -build_list() { - printf "\n#####################\n# $cpio_source\n" - - if [ -f "$cpio_source" ]; then - print_mtime "$cpio_source" - cat "$cpio_source" - elif [ -d "$cpio_source" ]; then - srcdir=$(echo "$cpio_source" | sed -e 's://*:/:g') - dirlist=$(find "${srcdir}" -printf "%p %m %U %G\n" 2>/dev/null) - - # If $dirlist is only one line, then the directory is empty - if [ "$(echo "${dirlist}" | wc -l)" -gt 1 ]; then - print_mtime "$cpio_source" - - echo "${dirlist}" | \ - while read x; do - parse ${x} - done +# if only one file is specified and it is .cpio file then use it direct as fs +# if a directory is specified then add all files in given direcotry to fs +# if a regular file is specified assume it is in gen_initramfs format +input_file() { + source="$1" + if [ -f "$1" ]; then + ${dep_list}header "$1" + is_cpio="$(echo "$1" | sed 's/^.*\.cpio/cpio/')" + if [ $2 -eq 0 -a ${is_cpio} == "cpio" ]; then + cpio_file=$1 + [ ! -z ${dep_list} ] && echo "$1" + return 0 + fi + if [ -z ${dep_list} ]; then + print_mtime "$1" >> ${output} + cat "$1" >> ${output} else - # Failsafe in case directory is empty - default_initramfs + grep ^file "$1" | cut -d ' ' -f 3 fi + elif [ -d "$1" ]; then + dir_filelist "$1" else - echo " $0: Cannot open '$cpio_source'" >&2 + echo " ${prog}: Cannot open '$1'" >&2 exit 1 fi } - +prog=$0 root_uid=0 root_gid=0 +dep_list= +cpio_file= +cpio_list= +output="/dev/stdout" +output_file="" +arg="$1" +case "$arg" in + "-l") # files included in initramfs - used by kbuild + dep_list="list_" + shift + ;; + "-o") # generate gzipped cpio image named $1 + shift + output_file="$1" + cpio_list="$(mktemp ${TMPDIR:-/tmp}/cpiolist.XXXXXX)" + output=${cpio_list} + shift + ;; +esac while [ $# -gt 0 ]; do arg="$1" shift case "$arg" in - "-u") + "-u") # map $1 to uid=0 (root) root_uid="$1" shift ;; - "-g") + "-g") # map $1 to gid=0 (root) root_gid="$1" shift ;; - "-d") + "-d") # display default initramfs list default_list="$arg" - default_initramfs + ${dep_list}default_initramfs ;; "-h") usage @@ -181,23 +256,27 @@ while [ $# -gt 0 ]; do *) case "$arg" in "-"*) - printf "ERROR: unknown option \"$arg\"\n" >&2 - printf "If the filename validly begins with '-', then it must be prefixed\n" >&2 - printf "by './' so that it won't be interpreted as an option." >&2 - printf "\n" >&2 - usage >&2 - exit 1 + unknown_option ;; - *) - cpio_source="$arg" - build_list + *) # input file/dir - process it + input_file "$arg" "$#" ;; esac ;; esac done -# spit out the default cpio list if a source hasn't been specified -[ -z "$cpio_source" -a -z "$default_list" ] && default_initramfs - +# If output_file is set we will generate cpio archive and gzip it +# we are carefull to delete tmp files +if [ ! -z ${output_file} ]; then + if [ -z ${cpio_file} ]; then + cpio_tfile="$(mktemp ${TMPDIR:-/tmp}/cpiofile.XXXXXX)" + usr/gen_init_cpio ${cpio_list} > ${cpio_tfile} + else + cpio_tfile=${cpio_file} + fi + rm ${cpio_list} + cat ${cpio_tfile} | gzip -f -9 - > ${output_file} + [ -z ${cpio_file} ] && rm ${cpio_tfile} +fi exit 0 diff --git a/usr/Makefile b/usr/Makefile index e2129cb570bb..19d74e6f2685 100644 --- a/usr/Makefile +++ b/usr/Makefile @@ -1,65 +1,48 @@ +# +# kbuild file for usr/ - including initramfs image +# -obj-y := initramfs_data.o - -hostprogs-y := gen_init_cpio +klibcdirs:; -clean-files := initramfs_data.cpio.gz initramfs_list +# Generate builtin.o based on initramfs_data.o +obj-y := initramfs_data.o # initramfs_data.o contains the initramfs_data.cpio.gz image. # The image is included using .incbin, a dependency which is not # tracked automatically. $(obj)/initramfs_data.o: $(obj)/initramfs_data.cpio.gz FORCE -ifdef CONFIG_INITRAMFS_ROOT_UID -gen_initramfs_args += -u $(CONFIG_INITRAMFS_ROOT_UID) -endif - -ifdef CONFIG_INITRAMFS_ROOT_GID -gen_initramfs_args += -g $(CONFIG_INITRAMFS_ROOT_GID) -endif - -# The $(shell echo $(CONFIG_INITRAMFS_SOURCE)) is to remove the -# gratuitous begin and end quotes from the Kconfig string type. -# Internal, escaped quotes in the Kconfig string will loose the -# escape and become active quotes. -quotefixed_initramfs_source := $(shell echo $(CONFIG_INITRAMFS_SOURCE)) - -filechk_initramfs_list = $(CONFIG_SHELL) \ - $(srctree)/scripts/gen_initramfs_list.sh $(gen_initramfs_args) $(quotefixed_initramfs_source) - -$(obj)/initramfs_list: $(obj)/Makefile FORCE - $(call filechk,initramfs_list) - -quiet_cmd_cpio = CPIO $@ - cmd_cpio = ./$< $(obj)/initramfs_list > $@ - - -# Check if the INITRAMFS_SOURCE is a cpio archive -ifneq (,$(findstring .cpio,$(quotefixed_initramfs_source))) - -# INITRAMFS_SOURCE has a cpio archive - verify that it's a single file -ifneq (1,$(words $(quotefixed_initramfs_source))) -$(error Only a single file may be specified in CONFIG_INITRAMFS_SOURCE (="$(quotefixed_initramfs_source)") when a cpio archive is directly specified.) -endif -# Now use the cpio archive directly -initramfs_data_cpio = $(quotefixed_initramfs_source) -targets += $(quotefixed_initramfs_source) - -else - -# INITRAMFS_SOURCE is not a cpio archive - create one -$(obj)/initramfs_data.cpio: $(obj)/gen_init_cpio \ - $(initramfs-y) $(obj)/initramfs_list FORCE - $(call if_changed,cpio) - -targets += initramfs_data.cpio -initramfs_data_cpio = $(obj)/initramfs_data.cpio - +##### +# Generate the initramfs cpio archive + +hostprogs-y := gen_init_cpio +initramfs := $(CONFIG_SHELL) $(srctree)/scripts/gen_initramfs_list.sh +ramfs-input := $(if $(filter-out "",$(CONFIG_INITRAMFS_SOURCE)), \ + $(CONFIG_INITRAMFS_SOURCE),-d) +ramfs-args := \ + $(if $(CONFIG_INITRAMFS_ROOT_UID), -u $(CONFIG_INITRAMFS_ROOT_UID)) \ + $(if $(CONFIG_INITRAMFS_ROOT_GID), -g $(CONFIG_INITRAMFS_ROOT_GID)) \ + $(ramfs-input) + +# .initramfs_data.cpio.gz.d is used to identify all files included +# in initramfs and to detect if any files are added/removed. +# Removed files are identified by directory timestamp being updated +# The dependency list is generated by gen_initramfs.sh -l +ifneq ($(wildcard $(obj)/.initramfs_data.cpio.gz.d),) + include $(obj)/.initramfs_data.cpio.gz.d endif - -$(obj)/initramfs_data.cpio.gz: $(initramfs_data_cpio) FORCE - $(call if_changed,gzip) - -targets += initramfs_data.cpio.gz +quiet_cmd_initfs = GEN $@ + cmd_initfs = $(initramfs) -o $@ $(ramfs-args) $(ramfs-input) + +targets := initramfs_data.cpio.gz +$(deps_initramfs): klibcdirs +# We rebuild initramfs_data.cpio.gz if: +# 1) Any included file is newer then initramfs_data.cpio.gz +# 2) There are changes in which files are included (added or deleted) +# 3) If gen_init_cpio are newer than initramfs_data.cpio.gz +# 4) arguments to gen_initramfs.sh changes +$(obj)/initramfs_data.cpio.gz: $(obj)/gen_init_cpio $(deps_initramfs) klibcdirs + $(Q)$(initramfs) -l $(ramfs-input) > $(obj)/.initramfs_data.cpio.gz.d + $(call if_changed,initfs) |