/* * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. * * Copyright (c) 2000-2005 Silicon Graphics, Inc. All Rights Reserved. */ #ifndef _ASM_IA64_SN_BTE_H #define _ASM_IA64_SN_BTE_H #include #include #include #include #include #include #define IBCT_NOTIFY (0x1UL << 4) #define IBCT_ZFIL_MODE (0x1UL << 0) /* #define BTE_DEBUG */ /* #define BTE_DEBUG_VERBOSE */ #ifdef BTE_DEBUG # define BTE_PRINTK(x) printk x /* Terse */ # ifdef BTE_DEBUG_VERBOSE # define BTE_PRINTKV(x) printk x /* Verbose */ # else # define BTE_PRINTKV(x) # endif /* BTE_DEBUG_VERBOSE */ #else # define BTE_PRINTK(x) # define BTE_PRINTKV(x) #endif /* BTE_DEBUG */ /* BTE status register only supports 16 bits for length field */ #define BTE_LEN_BITS (16) #define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1) #define BTE_MAX_XFER ((1 << BTE_LEN_BITS) * L1_CACHE_BYTES) /* Define hardware */ #define BTES_PER_NODE (is_shub2() ? 4 : 2) #define MAX_BTES_PER_NODE 4 #define BTE2OFF_CTRL (0) #define BTE2OFF_SRC (SH2_BT_ENG_SRC_ADDR_0 - SH2_BT_ENG_CSR_0) #define BTE2OFF_DEST (SH2_BT_ENG_DEST_ADDR_0 - SH2_BT_ENG_CSR_0) #define BTE2OFF_NOTIFY (SH2_BT_ENG_NOTIF_ADDR_0 - SH2_BT_ENG_CSR_0) #define BTE_BASE_ADDR(interface) \ (is_shub2() ? (interface == 0) ? SH2_BT_ENG_CSR_0 : \ (interface == 1) ? SH2_BT_ENG_CSR_1 : \ (interface == 2) ? SH2_BT_ENG_CSR_2 : \ SH2_BT_ENG_CSR_3 \ : (interface == 0) ? IIO_IBLS0 : IIO_IBLS1) #define BTE_SOURCE_ADDR(base) \ (is_shub2() ? base + (BTE2OFF_SRC/8) \ : base + (BTEOFF_SRC/8)) #define BTE_DEST_ADDR(base) \ (is_shub2() ? base + (BTE2OFF_DEST/8) \ : base + (BTEOFF_DEST/8)) #define BTE_CTRL_ADDR(base) \ (is_shub2() ? base + (BTE2OFF_CTRL/8) \ : base + (BTEOFF_CTRL/8)) #define BTE_NOTIF_ADDR(base) \ (is_shub2() ? base + (BTE2OFF_NOTIFY/8) \ : base + (BTEOFF_NOTIFY/8)) /* Define hardware modes */ #define BTE_NOTIFY (IBCT_NOTIFY) #define BTE_NORMAL BTE_NOTIFY #define BTE_ZERO_FILL (BTE_NOTIFY | IBCT_ZFIL_MODE) /* Use a reserved bit to let the caller specify a wait for any BTE */ #define BTE_WACQUIRE (0x4000) /* Use the BTE on the node with the destination memory */ #define BTE_USE_DEST (BTE_WACQUIRE << 1) /* Use any available BTE interface on any node for the transfer */ #define BTE_USE_ANY (BTE_USE_DEST << 1) /* macro to force the IBCT0 value valid */ #define BTE_VALID_MODE(x) ((x) & (IBCT_NOTIFY | IBCT_ZFIL_MODE)) #define BTE_ACTIVE (IBLS_BUSY | IBLS_ERROR) #define BTE_WORD_AVAILABLE (IBLS_BUSY << 1) #define BTE_WORD_BUSY (~BTE_WORD_AVAILABLE) /* * Some macros to simplify reading. * Start with macros to locate the BTE control registers. */ #define BTE_LNSTAT_LOAD(_bte) \ HUB_L(_bte->bte_base_addr) #define BTE_LNSTAT_STORE(_bte, _x) \ HUB_S(_bte->bte_base_addr, (_x)) #define BTE_SRC_STORE(_bte, _x) \ HUB_S(_bte->bte_source_addr, (_x)) #define BTE_DEST_STORE(_bte, _x) \ HUB_S(_bte->bte_destination_addr, (_x)) #define BTE_CTRL_STORE(_bte, _x) \ HUB_S(_bte->bte_control_addr, (_x)) #define BTE_NOTIF_STORE(_bte, _x) \ HUB_S(_bte->bte_notify_addr, (_x)) #define BTE_START_TRANSFER(_bte, _len, _mode) \ is_shub2() ? BTE_CTRL_STORE(_bte, IBLS_BUSY | (_mode << 24) | _len) \ : BTE_LNSTAT_STORE(_bte, _len); \ BTE_CTRL_STORE(_bte, _mode) /* Possible results from bte_copy and bte_unaligned_copy */ /* The following error codes map into the BTE hardware codes * IIO_ICRB_ECODE_* (in shubio.h). The hardware uses * an error code of 0 (IIO_ICRB_ECODE_DERR), but we want zero * to mean BTE_SUCCESS, so add one (BTEFAIL_OFFSET) to the error * codes to give the following error codes. */ #define BTEFAIL_OFFSET 1 typedef enum { BTE_SUCCESS, /* 0 is success */ BTEFAIL_DIR, /* Directory error due to IIO access*/ BTEFAIL_POISON, /* poison error on IO access (write to poison page) */ BTEFAIL_WERR, /* Write error (ie WINV to a Read only line) */ BTEFAIL_ACCESS, /* access error (protection violation) */ BTEFAIL_PWERR, /* Partial Write Error */ BTEFAIL_PRERR, /* Partial Read Error */ BTEFAIL_TOUT, /* CRB Time out */ BTEFAIL_XTERR, /* Incoming xtalk pkt had error bit */ BTEFAIL_NOTAVAIL, /* BTE not available */ } bte_result_t; /* * Structure defining a bte. An instance of this * structure is created in the nodepda for each * bte on that node (as defined by BTES_PER_NODE) * This structure contains everything necessary * to work with a BTE. */ struct bteinfo_s { volatile u64 notify ____cacheline_aligned; u64 *bte_base_addr ____cacheline_aligned; u64 *bte_source_addr; u64 *bte_destination_addr; u64 *bte_control_addr; u64 *bte_notify_addr; spinlock_t spinlock; cnodeid_t bte_cnode; /* cnode */ int bte_error_count; /* Number of errors encountered */ int bte_num; /* 0 --> BTE0, 1 --> BTE1 */ int cleanup_active; /* Interface is locked for cleanup */ volatile bte_result_t bh_error; /* error while processing */ volatile u64 *most_rcnt_na; struct bteinfo_s *btes_to_try[MAX_BTES_PER_NODE]; }; /* * Function prototypes (functions defined in bte.c, used elsewhere) */ extern bte_result_t bte_copy(u64, u64, u64, u64, void *); extern bte_result_t bte_unaligned_copy(u64, u64, u64, u64); extern void bte_error_handler(unsigned long); #define bte_zero(dest, len, mode, notification) \ bte_copy(0, dest, len, ((mode) | BTE_ZERO_FILL), notification) /* * The following is the prefered way of calling bte_unaligned_copy * If the copy is fully cache line aligned, then bte_copy is * used instead. Since bte_copy is inlined, this saves a call * stack. NOTE: bte_copy is called synchronously and does block * until the transfer is complete. In order to get the asynch * version of bte_copy, you must perform this check yourself. */ #define BTE_UNALIGNED_COPY(src, dest, len, mode) \ (((len & L1_CACHE_MASK) || (src & L1_CACHE_MASK) || \ (dest & L1_CACHE_MASK)) ? \ bte_unaligned_copy(src, dest, len, mode) : \ bte_copy(src, dest, len, mode, NULL)) #endif /* _ASM_IA64_SN_BTE_H */