/* * HP300 Topcat framebuffer support (derived from macfb of all things) * Phil Blundell 1998 * DIO-II, colour map and Catseye support by * Kars de Jong , May 2004. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include static struct fb_info fb_info = { .fix = { .id = "HP300 ", .type = FB_TYPE_PACKED_PIXELS, .visual = FB_VISUAL_PSEUDOCOLOR, .accel = FB_ACCEL_NONE, } }; static unsigned long fb_regs; static unsigned char fb_bitmask; #define TC_NBLANK 0x4080 #define TC_WEN 0x4088 #define TC_REN 0x408c #define TC_FBEN 0x4090 #define TC_PRR 0x40ea /* These defines match the X window system */ #define RR_CLEAR 0x0 #define RR_COPY 0x3 #define RR_NOOP 0x5 #define RR_XOR 0x6 #define RR_INVERT 0xa #define RR_COPYINVERTED 0xc #define RR_SET 0xf /* blitter regs */ #define BUSY 0x4044 #define WMRR 0x40ef #define SOURCE_X 0x40f2 #define SOURCE_Y 0x40f6 #define DEST_X 0x40fa #define DEST_Y 0x40fe #define WHEIGHT 0x4106 #define WWIDTH 0x4102 #define WMOVE 0x409c static struct fb_var_screeninfo hpfb_defined = { .red = { .length = 8, }, .green = { .length = 8, }, .blue = { .length = 8, }, .activate = FB_ACTIVATE_NOW, .height = -1, .width = -1, .vmode = FB_VMODE_NONINTERLACED, }; static int hpfb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *info) { /* use MSBs */ unsigned char _red =red>>8; unsigned char _green=green>>8; unsigned char _blue =blue>>8; unsigned char _regno=regno; /* * Set a single color register. The values supplied are * already rounded down to the hardware's capabilities * (according to the entries in the `var' structure). Return * != 0 for invalid regno. */ if (regno >= info->cmap.len) return 1; while (in_be16(fb_regs + 0x6002) & 0x4) udelay(1); out_be16(fb_regs + 0x60ba, 0xff); out_be16(fb_regs + 0x60b2, _red); out_be16(fb_regs + 0x60b4, _green); out_be16(fb_regs + 0x60b6, _blue); out_be16(fb_regs + 0x60b8, ~_regno); out_be16(fb_regs + 0x60f0, 0xff); udelay(100); while (in_be16(fb_regs + 0x6002) & 0x4) udelay(1); out_be16(fb_regs + 0x60b2, 0); out_be16(fb_regs + 0x60b4, 0); out_be16(fb_regs + 0x60b6, 0); out_be16(fb_regs + 0x60b8, 0); return 0; } /* 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off */ static int hpfb_blank(int blank, struct fb_info *info) { out_8(fb_regs + TC_NBLANK, (blank ? 0x00 : fb_bitmask)); return 0; } static void topcat_blit(int x0, int y0, int x1, int y1, int w, int h, int rr) { if (rr >= 0) { while (in_8(fb_regs + BUSY) & fb_bitmask) ; } out_8(fb_regs + TC_FBEN, fb_bitmask); if (rr >= 0) { out_8(fb_regs + TC_WEN, fb_bitmask); out_8(fb_regs + WMRR, rr); } out_be16(fb_regs + SOURCE_X, x0); out_be16(fb_regs + SOURCE_Y, y0); out_be16(fb_regs + DEST_X, x1); out_be16(fb_regs + DEST_Y, y1); out_be16(fb_regs + WWIDTH, w); out_be16(fb_regs + WHEIGHT, h); out_8(fb_regs + WMOVE, fb_bitmask); } static void hpfb_copyarea(struct fb_info *info, const struct fb_copyarea *area) { topcat_blit(area->sx, area->sy, area->dx, area->dy, area->width, area->height, RR_COPY); } static void hpfb_fillrect(struct fb_info *p, const struct fb_fillrect *region) { u8 clr; clr = region->color & 0xff; while (in_8(fb_regs + BUSY) & fb_bitmask) ; /* Foreground */ out_8(fb_regs + TC_WEN, fb_bitmask & clr); out_8(fb_regs + WMRR, (region->rop == ROP_COPY ? RR_SET : RR_INVERT)); /* Background */ out_8(fb_regs + TC_WEN, fb_bitmask & ~clr); out_8(fb_regs + WMRR, (region->rop == ROP_COPY ? RR_CLEAR : RR_NOOP)); topcat_blit(region->dx, region->dy, region->dx, region->dy, region->width, region->height, -1); } static int hpfb_sync(struct fb_info *info) { /* * Since we also access the framebuffer directly, we have to wait * until the block mover is finished */ while (in_8(fb_regs + BUSY) & fb_bitmask) ; out_8(fb_regs + TC_WEN, fb_bitmask); out_8(fb_regs + TC_PRR, RR_COPY); out_8(fb_regs + TC_FBEN, fb_bitmask); return 0; } static struct fb_ops hpfb_ops = { .owner = THIS_MODULE, .fb_setcolreg = hpfb_setcolreg, .fb_blank = hpfb_blank, .fb_fillrect = hpfb_fillrect, .fb_copyarea = hpfb_copyarea, .fb_imageblit = cfb_imageblit, .fb_cursor = soft_cursor, .fb_sync = hpfb_sync, }; /* Common to all HP framebuffers */ #define HPFB_FBWMSB 0x05 /* Frame buffer width */ #define HPFB_FBWLSB 0x07 #define HPFB_FBHMSB 0x09 /* Frame buffer height */ #define HPFB_FBHLSB 0x0b #define HPFB_DWMSB 0x0d /* Display width */ #define HPFB_DWLSB 0x0f #define HPFB_DHMSB 0x11 /* Display height */ #define HPFB_DHLSB 0x13 #define HPFB_NUMPLANES 0x5b /* Number of colour planes */ #define HPFB_FBOMSB 0x5d /* Frame buffer offset */ #define HPFB_FBOLSB 0x5f static int __init hpfb_init_one(unsigned long phys_base, unsigned long virt_base) { unsigned long fboff, fb_width, fb_height, fb_start; fb_regs = virt_base; fboff = (in_8(fb_regs + HPFB_FBOMSB) << 8) | in_8(fb_regs + HPFB_FBOLSB); fb_info.fix.smem_start = (in_8(fb_regs + fboff) << 16); if (phys_base >= DIOII_BASE) { fb_info.fix.smem_start += phys_base; } if (DIO_SECID(fb_regs) != DIO_ID2_TOPCAT) { /* This is the magic incantation the HP X server uses to make Catseye boards work. */ while (in_be16(fb_regs+0x4800) & 1) ; out_be16(fb_regs+0x4800, 0); /* Catseye status */ out_be16(fb_regs+0x4510, 0); /* VB */ out_be16(fb_regs+0x4512, 0); /* TCNTRL */ out_be16(fb_regs+0x4514, 0); /* ACNTRL */ out_be16(fb_regs+0x4516, 0); /* PNCNTRL */ out_be16(fb_regs+0x4206, 0x90); /* RUG Command/Status */ out_be16(fb_regs+0x60a2, 0); /* Overlay Mask */ out_be16(fb_regs+0x60bc, 0); /* Ram Select */ } /* * Fill in the available video resolution */ fb_width = (in_8(fb_regs + HPFB_FBWMSB) << 8) | in_8(fb_regs + HPFB_FBWLSB); fb_info.fix.line_length = fb_width; fb_height = (in_8(fb_regs + HPFB_FBHMSB) << 8) | in_8(fb_regs + HPFB_FBHLSB); fb_info.fix.smem_len = fb_width * fb_height; fb_start = (unsigned long)ioremap_writethrough(fb_info.fix.smem_start, fb_info.fix.smem_len); hpfb_defined.xres = (in_8(fb_regs + HPFB_DWMSB) << 8) | in_8(fb_regs + HPFB_DWLSB); hpfb_defined.yres = (in_8(fb_regs + HPFB_DHMSB) << 8) | in_8(fb_regs + HPFB_DHLSB); hpfb_defined.xres_virtual = hpfb_defined.xres; hpfb_defined.yres_virtual = hpfb_defined.yres; hpfb_defined.bits_per_pixel = in_8(fb_regs + HPFB_NUMPLANES); printk(KERN_INFO "hpfb: framebuffer at 0x%lx, mapped to 0x%lx, size %dk\n", fb_info.fix.smem_start, fb_start, fb_info.fix.smem_len/1024); printk(KERN_INFO "hpfb: mode is %dx%dx%d, linelength=%d\n", hpfb_defined.xres, hpfb_defined.yres, hpfb_defined.bits_per_pixel, fb_info.fix.line_length); /* * Give the hardware a bit of a prod and work out how many bits per * pixel are supported. */ out_8(fb_regs + TC_WEN, 0xff); out_8(fb_regs + TC_PRR, RR_COPY); out_8(fb_regs + TC_FBEN, 0xff); out_8(fb_start, 0xff); fb_bitmask = in_8(fb_start); out_8(fb_start, 0); /* * Enable reading/writing of all the planes. */ out_8(fb_regs + TC_WEN, fb_bitmask); out_8(fb_regs + TC_PRR, RR_COPY); out_8(fb_regs + TC_REN, fb_bitmask); out_8(fb_regs + TC_FBEN, fb_bitmask); /* * Clear the screen. */ topcat_blit(0, 0, 0, 0, fb_width, fb_height, RR_CLEAR); /* * Let there be consoles.. */ if (DIO_SECID(fb_regs) == DIO_ID2_TOPCAT) strcat(fb_info.fix.id, "Topcat"); else strcat(fb_info.fix.id, "Catseye"); fb_info.fbops = &hpfb_ops; fb_info.flags = FBINFO_DEFAULT; fb_info.var = hpfb_defined; fb_info.screen_base = (char *)fb_start; fb_alloc_cmap(&fb_info.cmap, 1 << hpfb_defined.bits_per_pixel, 0); if (register_framebuffer(&fb_info) < 0) { fb_dealloc_cmap(&fb_info.cmap); return 1; } printk(KERN_INFO "fb%d: %s frame buffer device\n", fb_info.node, fb_info.fix.id); return 0; } /* * Check that the secondary ID indicates that we have some hope of working with this * framebuffer. The catseye boards are pretty much like topcats and we can muddle through. */ #define topcat_sid_ok(x) (((x) == DIO_ID2_LRCATSEYE) || ((x) == DIO_ID2_HRCCATSEYE) \ || ((x) == DIO_ID2_HRMCATSEYE) || ((x) == DIO_ID2_TOPCAT)) /* * Initialise the framebuffer */ static int __devinit hpfb_dio_probe(struct dio_dev * d, const struct dio_device_id * ent) { unsigned long paddr, vaddr; paddr = d->resource.start; if (!request_mem_region(d->resource.start, d->resource.end - d->resource.start, d->name)) return -EBUSY; if (d->scode >= DIOII_SCBASE) { vaddr = (unsigned long)ioremap(paddr, d->resource.end - d->resource.start); } else { vaddr = paddr + DIO_VIRADDRBASE; } printk(KERN_INFO "Topcat found at DIO select code %d " "(secondary id %02x)\n", d->scode, (d->id >> 8) & 0xff); if (hpfb_init_one(paddr, vaddr)) { if (d->scode >= DIOII_SCBASE) iounmap((void *)vaddr); return -ENOMEM; } return 0; } static void __devexit hpfb_remove_one(struct dio_dev *d) { unregister_framebuffer(&fb_info); if (d->scode >= DIOII_SCBASE) iounmap((void *)fb_regs); release_mem_region(d->resource.start, d->resource.end - d->resource.start); } static struct dio_device_id hpfb_dio_tbl[] = { { DIO_ENCODE_ID(DIO_ID_FBUFFER, DIO_ID2_LRCATSEYE) }, { DIO_ENCODE_ID(DIO_ID_FBUFFER, DIO_ID2_HRCCATSEYE) }, { DIO_ENCODE_ID(DIO_ID_FBUFFER, DIO_ID2_HRMCATSEYE) }, { DIO_ENCODE_ID(DIO_ID_FBUFFER, DIO_ID2_TOPCAT) }, { 0 } }; static struct dio_driver hpfb_driver = { .name = "hpfb", .id_table = hpfb_dio_tbl, .probe = hpfb_dio_probe, .remove = __devexit_p(hpfb_remove_one), }; int __init hpfb_init(void) { unsigned int sid; mm_segment_t fs; unsigned char i; int err; /* Topcats can be on the internal IO bus or real DIO devices. * The internal variant sits at 0x560000; it has primary * and secondary ID registers just like the DIO version. * So we merge the two detection routines. * * Perhaps this #define should be in a global header file: * I believe it's common to all internal fbs, not just topcat. */ #define INTFBVADDR 0xf0560000 #define INTFBPADDR 0x560000 if (!MACH_IS_HP300) return -ENXIO; if (fb_get_options("hpfb", NULL)) return -ENODEV; dio_module_init(&hpfb_driver); fs = get_fs(); set_fs(KERNEL_DS); err = get_user(i, (unsigned char *)INTFBVADDR + DIO_IDOFF); set_fs(fs); if (!err && (i == DIO_ID_FBUFFER) && topcat_sid_ok(sid = DIO_SECID(INTFBVADDR))) { if (!request_mem_region(INTFBPADDR, DIO_DEVSIZE, "Internal Topcat")) return -EBUSY; printk(KERN_INFO "Internal Topcat found (secondary id %02x)\n", sid); if (hpfb_init_one(INTFBPADDR, INTFBVADDR)) { return -ENOMEM; } } return 0; } void __exit hpfb_cleanup_module(void) { dio_unregister_driver(&hpfb_driver); } module_init(hpfb_init); module_exit(hpfb_cleanup_module); MODULE_LICENSE("GPL");