/* * Interfaces to retrieve and set PDC Stable options (firmware) * * Copyright (C) 2005 Thibaut VARENE * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * * DEV NOTE: the PDC Procedures reference states that: * "A minimum of 96 bytes of Stable Storage is required. Providing more than * 96 bytes of Stable Storage is optional [...]. Failure to provide the * optional locations from 96 to 192 results in the loss of certain * functionality during boot." * * Since locations between 96 and 192 are the various paths, most (if not * all) PA-RISC machines should have them. Anyway, for safety reasons, the * following code can deal with only 96 bytes of Stable Storage, and all * sizes between 96 and 192 bytes (provided they are multiple of struct * device_path size, eg: 128, 160 and 192) to provide full information. * The code makes no use of data above 192 bytes. One last word: there's one * path we can always count on: the primary path. */ #undef PDCS_DEBUG #ifdef PDCS_DEBUG #define DPRINTK(fmt, args...) printk(KERN_DEBUG fmt, ## args) #else #define DPRINTK(fmt, args...) #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define PDCS_VERSION "0.10" #define PDCS_ADDR_PPRI 0x00 #define PDCS_ADDR_OSID 0x40 #define PDCS_ADDR_FSIZ 0x5C #define PDCS_ADDR_PCON 0x60 #define PDCS_ADDR_PALT 0x80 #define PDCS_ADDR_PKBD 0xA0 MODULE_AUTHOR("Thibaut VARENE "); MODULE_DESCRIPTION("sysfs interface to HP PDC Stable Storage data"); MODULE_LICENSE("GPL"); MODULE_VERSION(PDCS_VERSION); static unsigned long pdcs_size __read_mostly; /* This struct defines what we need to deal with a parisc pdc path entry */ struct pdcspath_entry { short ready; /* entry record is valid if != 0 */ unsigned long addr; /* entry address in stable storage */ char *name; /* entry name */ struct device_path devpath; /* device path in parisc representation */ struct device *dev; /* corresponding device */ struct kobject kobj; }; struct pdcspath_attribute { struct attribute attr; ssize_t (*show)(struct pdcspath_entry *entry, char *buf); ssize_t (*store)(struct pdcspath_entry *entry, const char *buf, size_t count); }; #define PDCSPATH_ENTRY(_addr, _name) \ struct pdcspath_entry pdcspath_entry_##_name = { \ .ready = 0, \ .addr = _addr, \ .name = __stringify(_name), \ }; #define PDCS_ATTR(_name, _mode, _show, _store) \ struct subsys_attribute pdcs_attr_##_name = { \ .attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE}, \ .show = _show, \ .store = _store, \ }; #define PATHS_ATTR(_name, _mode, _show, _store) \ struct pdcspath_attribute paths_attr_##_name = { \ .attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE}, \ .show = _show, \ .store = _store, \ }; #define to_pdcspath_attribute(_attr) container_of(_attr, struct pdcspath_attribute, attr) #define to_pdcspath_entry(obj) container_of(obj, struct pdcspath_entry, kobj) /** * pdcspath_fetch - This function populates the path entry structs. * @entry: A pointer to an allocated pdcspath_entry. * * The general idea is that you don't read from the Stable Storage every time * you access the files provided by the facilites. We store a copy of the * content of the stable storage WRT various paths in these structs. We read * these structs when reading the files, and we will write to these structs when * writing to the files, and only then write them back to the Stable Storage. */ static int pdcspath_fetch(struct pdcspath_entry *entry) { struct device_path *devpath; if (!entry) return -EINVAL; devpath = &entry->devpath; DPRINTK("%s: fetch: 0x%p, 0x%p, addr: 0x%lx\n", __func__, entry, devpath, entry->addr); /* addr, devpath and count must be word aligned */ if (pdc_stable_read(entry->addr, devpath, sizeof(*devpath)) != PDC_OK) return -EIO; /* Find the matching device. NOTE: hardware_path overlays with device_path, so the nice cast can be used */ entry->dev = hwpath_to_device((struct hardware_path *)devpath); entry->ready = 1; DPRINTK("%s: device: 0x%p\n", __func__, entry->dev); return 0; } /** * pdcspath_store - This function writes a path to stable storage. * @entry: A pointer to an allocated pdcspath_entry. * * It can be used in two ways: either by passing it a preset devpath struct * containing an already computed hardware path, or by passing it a device * pointer, from which it'll find out the corresponding hardware path. * For now we do not handle the case where there's an error in writing to the * Stable Storage area, so you'd better not mess up the data :P */ static int pdcspath_store(struct pdcspath_entry *entry) { struct device_path *devpath; if (!entry) return -EINVAL; devpath = &entry->devpath; /* We expect the caller to set the ready flag to 0 if the hardware path struct provided is invalid, so that we know we have to fill it. First case, we don't have a preset hwpath... */ if (!entry->ready) { /* ...but we have a device, map it */ if (entry->dev) device_to_hwpath(entry->dev, (struct hardware_path *)devpath); else return -EINVAL; } /* else, we expect the provided hwpath to be valid. */ DPRINTK("%s: store: 0x%p, 0x%p, addr: 0x%lx\n", __func__, entry, devpath, entry->addr); /* addr, devpath and count must be word aligned */ if (pdc_stable_write(entry->addr, devpath, sizeof(*devpath)) != PDC_OK) { printk(KERN_ERR "%s: an error occured when writing to PDC.\n" "It is likely that the Stable Storage data has been corrupted.\n" "Please check it carefully upon next reboot.\n", __func__); return -EIO; } /* kobject is already registered */ entry->ready = 2; DPRINTK("%s: device: 0x%p\n", __func__, entry->dev); return 0; } /** * pdcspath_hwpath_read - This function handles hardware path pretty printing. * @entry: An allocated and populated pdscpath_entry struct. * @buf: The output buffer to write to. * * We will call this function to format the output of the hwpath attribute file. */ static ssize_t pdcspath_hwpath_read(struct pdcspath_entry *entry, char *buf) { char *out = buf; struct device_path *devpath; unsigned short i; if (!entry || !buf) return -EINVAL; devpath = &entry->devpath; if (!entry->ready) return -ENODATA; for (i = 0; i < 6; i++) { if (devpath->bc[i] >= 128) continue; out += sprintf(out, "%u/", (unsigned char)devpath->bc[i]); } out += sprintf(out, "%u\n", (unsigned char)devpath->mod); return out - buf; } /** * pdcspath_hwpath_write - This function handles hardware path modifying. * @entry: An allocated and populated pdscpath_entry struct. * @buf: The input buffer to read from. * @count: The number of bytes to be read. * * We will call this function to change the current hardware path. * Hardware paths are to be given '/'-delimited, without brackets. * We take care to make sure that the provided path actually maps to an existing * device, BUT nothing would prevent some foolish user to set the path to some * PCI bridge or even a CPU... * A better work around would be to make sure we are at the end of a device tree * for instance, but it would be IMHO beyond the simple scope of that driver. * The aim is to provide a facility. Data correctness is left to userland. */ static ssize_t pdcspath_hwpath_write(struct pdcspath_entry *entry, const char *buf, size_t count) { struct hardware_path hwpath; unsigned short i; char in[count+1], *temp; struct device *dev; if (!entry || !buf || !count) return -EINVAL; /* We'll use a local copy of buf */ memset(in, 0, count+1); strncpy(in, buf, count); /* Let's clean up the target. 0xff is a blank pattern */ memset(&hwpath, 0xff, sizeof(hwpath)); /* First, pick the mod field (the last one of the input string) */ if (!(temp = strrchr(in, '/'))) return -EINVAL; hwpath.mod = simple_strtoul(temp+1, NULL, 10); in[temp-in] = '\0'; /* truncate the remaining string. just precaution */ DPRINTK("%s: mod: %d\n", __func__, hwpath.mod); /* Then, loop for each delimiter, making sure we don't have too many. we write the bc fields in a down-top way. No matter what, we stop before writing the last field. If there are too many fields anyway, then the user is a moron and it'll be caught up later when we'll check the consistency of the given hwpath. */ for (i=5; ((temp = strrchr(in, '/'))) && (temp-in > 0) && (likely(i)); i--) { hwpath.bc[i] = simple_strtoul(temp+1, NULL, 10); in[temp-in] = '\0'; DPRINTK("%s: bc[%d]: %d\n", __func__, i, hwpath.bc[i]); } /* Store the final field */ hwpath.bc[i] = simple_strtoul(in, NULL, 10); DPRINTK("%s: bc[%d]: %d\n", __func__, i, hwpath.bc[i]); /* Now we check that the user isn't trying to lure us */ if (!(dev = hwpath_to_device((struct hardware_path *)&hwpath))) { printk(KERN_WARNING "%s: attempt to set invalid \"%s\" " "hardware path: %s\n", __func__, entry->name, buf); return -EINVAL; } /* So far so good, let's get in deep */ entry->ready = 0; entry->dev = dev; /* Now, dive in. Write back to the hardware */ WARN_ON(pdcspath_store(entry)); /* this warn should *NEVER* happen */ /* Update the symlink to the real device */ sysfs_remove_link(&entry->kobj, "device"); sysfs_create_link(&entry->kobj, &entry->dev->kobj, "device"); printk(KERN_INFO "PDC Stable Storage: changed \"%s\" path to \"%s\"\n", entry->name, buf); return count; } /** * pdcspath_layer_read - Extended layer (eg. SCSI ids) pretty printing. * @entry: An allocated and populated pdscpath_entry struct. * @buf: The output buffer to write to. * * We will call this function to format the output of the layer attribute file. */ static ssize_t pdcspath_layer_read(struct pdcspath_entry *entry, char *buf) { char *out = buf; struct device_path *devpath; unsigned short i; if (!entry || !buf) return -EINVAL; devpath = &entry->devpath; if (!entry->ready) return -ENODATA; for (i = 0; devpath->layers[i] && (likely(i < 6)); i++) out += sprintf(out, "%u ", devpath->layers[i]); out += sprintf(out, "\n"); return out - buf; } /** * pdcspath_layer_write - This function handles extended layer modifying. * @entry: An allocated and populated pdscpath_entry struct. * @buf: The input buffer to read from. * @count: The number of bytes to be read. * * We will call this function to change the current layer value. * Layers are to be given '.'-delimited, without brackets. * XXX beware we are far less checky WRT input data provided than for hwpath. * Potential harm can be done, since there's no way to check the validity of * the layer fields. */ static ssize_t pdcspath_layer_write(struct pdcspath_entry *entry, const char *buf, size_t count) { unsigned int layers[6]; /* device-specific info (ctlr#, unit#, ...) */ unsigned short i; char in[count+1], *temp; if (!entry || !buf || !count) return -EINVAL; /* We'll use a local copy of buf */ memset(in, 0, count+1); strncpy(in, buf, count); /* Let's clean up the target. 0 is a blank pattern */ memset(&layers, 0, sizeof(layers)); /* First, pick the first layer */ if (unlikely(!isdigit(*in))) return -EINVAL; layers[0] = simple_strtoul(in, NULL, 10); DPRINTK("%s: layer[0]: %d\n", __func__, layers[0]); temp = in; for (i=1; ((temp = strchr(temp, '.'))) && (likely(i<6)); i++) { if (unlikely(!isdigit(*(++temp)))) return -EINVAL; layers[i] = simple_strtoul(temp, NULL, 10); DPRINTK("%s: layer[%d]: %d\n", __func__, i, layers[i]); } /* So far so good, let's get in deep */ /* First, overwrite the current layers with the new ones, not touching the hardware path. */ memcpy(&entry->devpath.layers, &layers, sizeof(layers)); /* Now, dive in. Write back to the hardware */ WARN_ON(pdcspath_store(entry)); /* this warn should *NEVER* happen */ printk(KERN_INFO "PDC Stable Storage: changed \"%s\" layers to \"%s\"\n", entry->name, buf); return count; } /** * pdcspath_attr_show - Generic read function call wrapper. * @kobj: The kobject to get info from. * @attr: The attribute looked upon. * @buf: The output buffer. */ static ssize_t pdcspath_attr_show(struct kobject *kobj, struct attribute *attr, char *buf) { struct pdcspath_entry *entry = to_pdcspath_entry(kobj); struct pdcspath_attribute *pdcs_attr = to_pdcspath_attribute(attr); ssize_t ret = 0; if (!capable(CAP_SYS_ADMIN)) return -EACCES; if (pdcs_attr->show) ret = pdcs_attr->show(entry, buf); return ret; } /** * pdcspath_attr_store - Generic write function call wrapper. * @kobj: The kobject to write info to. * @attr: The attribute to be modified. * @buf: The input buffer. * @count: The size of the buffer. */ static ssize_t pdcspath_attr_store(struct kobject *kobj, struct attribute *attr, const char *buf, size_t count) { struct pdcspath_entry *entry = to_pdcspath_entry(kobj); struct pdcspath_attribute *pdcs_attr = to_pdcspath_attribute(attr); ssize_t ret = 0; if (!capable(CAP_SYS_ADMIN)) return -EACCES; if (pdcs_attr->store) ret = pdcs_attr->store(entry, buf, count); return ret; } static struct sysfs_ops pdcspath_attr_ops = { .show = pdcspath_attr_show, .store = pdcspath_attr_store, }; /* These are the two attributes of any PDC path. */ static PATHS_ATTR(hwpath, 0600, pdcspath_hwpath_read, pdcspath_hwpath_write); static PATHS_ATTR(layer, 0600, pdcspath_layer_read, pdcspath_layer_write); static struct attribute *paths_subsys_attrs[] = { &paths_attr_hwpath.attr, &paths_attr_layer.attr, NULL, }; /* Specific kobject type for our PDC paths */ static struct kobj_type ktype_pdcspath = { .sysfs_ops = &pdcspath_attr_ops, .default_attrs = paths_subsys_attrs, }; /* We hard define the 4 types of path we expect to find */ static PDCSPATH_ENTRY(PDCS_ADDR_PPRI, primary); static PDCSPATH_ENTRY(PDCS_ADDR_PCON, console); static PDCSPATH_ENTRY(PDCS_ADDR_PALT, alternative); static PDCSPATH_ENTRY(PDCS_ADDR_PKBD, keyboard); /* An array containing all PDC paths we will deal with */ static struct pdcspath_entry *pdcspath_entries[] = { &pdcspath_entry_primary, &pdcspath_entry_alternative, &pdcspath_entry_console, &pdcspath_entry_keyboard, NULL, }; /** * pdcs_info_read - Pretty printing of the remaining useful data. * @entry: An allocated and populated subsytem struct. We don't use it tho. * @buf: The output buffer to write to. * * We will call this function to format the output of the 'info' attribute file. * Please refer to PDC Procedures documentation, section PDC_STABLE to get a * better insight of what we're doing here. */ static ssize_t pdcs_info_read(struct subsystem *entry, char *buf) { char *out = buf; __u32 result; struct device_path devpath; char *tmpstr = NULL; if (!entry || !buf) return -EINVAL; /* show the size of the stable storage */ out += sprintf(out, "Stable Storage size: %ld bytes\n", pdcs_size); /* deal with flags */ if (pdc_stable_read(PDCS_ADDR_PPRI, &devpath, sizeof(devpath)) != PDC_OK) return -EIO; out += sprintf(out, "Autoboot: %s\n", (devpath.flags & PF_AUTOBOOT) ? "On" : "Off"); out += sprintf(out, "Autosearch: %s\n", (devpath.flags & PF_AUTOSEARCH) ? "On" : "Off"); out += sprintf(out, "Timer: %u s\n", (devpath.flags & PF_TIMER) ? (1 << (devpath.flags & PF_TIMER)) : 0); /* get OSID */ if (pdc_stable_read(PDCS_ADDR_OSID, &result, sizeof(result)) != PDC_OK) return -EIO; /* the actual result is 16 bits away */ switch (result >> 16) { case 0x0000: tmpstr = "No OS-dependent data"; break; case 0x0001: tmpstr = "HP-UX dependent data"; break; case 0x0002: tmpstr = "MPE-iX dependent data"; break; case 0x0003: tmpstr = "OSF dependent data"; break; case 0x0004: tmpstr = "HP-RT dependent data"; break; case 0x0005: tmpstr = "Novell Netware dependent data"; break; default: tmpstr = "Unknown"; break; } out += sprintf(out, "OS ID: %s (0x%.4x)\n", tmpstr, (result >> 16)); /* get fast-size */ if (pdc_stable_read(PDCS_ADDR_FSIZ, &result, sizeof(result)) != PDC_OK) return -EIO; out += sprintf(out, "Memory tested: "); if ((result & 0x0F) < 0x0E) out += sprintf(out, "%d kB", (1<<(result & 0x0F))*256); else out += sprintf(out, "All"); out += sprintf(out, "\n"); return out - buf; } /** * pdcs_info_write - This function handles boot flag modifying. * @entry: An allocated and populated subsytem struct. We don't use it tho. * @buf: The input buffer to read from. * @count: The number of bytes to be read. * * We will call this function to change the current boot flags. * We expect a precise syntax: * \"n n\" (n == 0 or 1) to toggle respectively AutoBoot and AutoSearch * * As of now there is no incentive on my side to provide more "knobs" to that * interface, since modifying the rest of the data is pretty meaningless when * the machine is running and for the expected use of that facility, such as * PALO setting up the boot disk when installing a Linux distribution... */ static ssize_t pdcs_info_write(struct subsystem *entry, const char *buf, size_t count) { struct pdcspath_entry *pathentry; unsigned char flags; char in[count+1], *temp; char c; if (!capable(CAP_SYS_ADMIN)) return -EACCES; if (!entry || !buf || !count) return -EINVAL; /* We'll use a local copy of buf */ memset(in, 0, count+1); strncpy(in, buf, count); /* Current flags are stored in primary boot path entry */ pathentry = &pdcspath_entry_primary; /* Be nice to the existing flag record */ flags = pathentry->devpath.flags; DPRINTK("%s: flags before: 0x%X\n", __func__, flags); temp = in; while (*temp && isspace(*temp)) temp++; c = *temp++ - '0'; if ((c != 0) && (c != 1)) goto parse_error; if (c == 0) flags &= ~PF_AUTOBOOT; else flags |= PF_AUTOBOOT; if (*temp++ != ' ') goto parse_error; c = *temp++ - '0'; if ((c != 0) && (c != 1)) goto parse_error; if (c == 0) flags &= ~PF_AUTOSEARCH; else flags |= PF_AUTOSEARCH; DPRINTK("%s: flags after: 0x%X\n", __func__, flags); /* So far so good, let's get in deep */ /* Change the path entry flags first */ pathentry->devpath.flags = flags; /* Now, dive in. Write back to the hardware */ WARN_ON(pdcspath_store(pathentry)); /* this warn should *NEVER* happen */ printk(KERN_INFO "PDC Stable Storage: changed flags to \"%s\"\n", buf); return count; parse_error: printk(KERN_WARNING "%s: Parse error: expect \"n n\" (n == 0 or 1) for AB and AS\n", __func__); return -EINVAL; } /* The last attribute (the 'root' one actually) with all remaining data. */ static PDCS_ATTR(info, 0600, pdcs_info_read, pdcs_info_write); static struct subsys_attribute *pdcs_subsys_attrs[] = { &pdcs_attr_info, NULL, /* maybe more in the future? */ }; static decl_subsys(paths, &ktype_pdcspath, NULL); static decl_subsys(pdc, NULL, NULL); /** * pdcs_register_pathentries - Prepares path entries kobjects for sysfs usage. * * It creates kobjects corresponding to each path entry with nice sysfs * links to the real device. This is where the magic takes place: when * registering the subsystem attributes during module init, each kobject hereby * created will show in the sysfs tree as a folder containing files as defined * by path_subsys_attr[]. */ static inline int __init pdcs_register_pathentries(void) { unsigned short i; struct pdcspath_entry *entry; int err; for (i = 0; (entry = pdcspath_entries[i]); i++) { if (pdcspath_fetch(entry) < 0) continue; if ((err = kobject_set_name(&entry->kobj, "%s", entry->name))) return err; kobj_set_kset_s(entry, paths_subsys); if ((err = kobject_register(&entry->kobj))) return err; /* kobject is now registered */ entry->ready = 2; if (!entry->dev) continue; /* Add a nice symlink to the real device */ sysfs_create_link(&entry->kobj, &entry->dev->kobj, "device"); } return 0; } /** * pdcs_unregister_pathentries - Routine called when unregistering the module. */ static inline void pdcs_unregister_pathentries(void) { unsigned short i; struct pdcspath_entry *entry; for (i = 0; (entry = pdcspath_entries[i]); i++) if (entry->ready >= 2) kobject_unregister(&entry->kobj); } /* * For now we register the pdc subsystem with the firmware subsystem * and the paths subsystem with the pdc subsystem */ static int __init pdc_stable_init(void) { struct subsys_attribute *attr; int i, rc = 0, error = 0; /* find the size of the stable storage */ if (pdc_stable_get_size(&pdcs_size) != PDC_OK) return -ENODEV; printk(KERN_INFO "PDC Stable Storage facility v%s\n", PDCS_VERSION); /* For now we'll register the pdc subsys within this driver */ if ((rc = firmware_register(&pdc_subsys))) goto fail_firmreg; /* Don't forget the info entry */ for (i = 0; (attr = pdcs_subsys_attrs[i]) && !error; i++) if (attr->show) error = subsys_create_file(&pdc_subsys, attr); /* register the paths subsys as a subsystem of pdc subsys */ kset_set_kset_s(&paths_subsys, pdc_subsys); if ((rc= subsystem_register(&paths_subsys))) goto fail_subsysreg; /* now we create all "files" for the paths subsys */ if ((rc = pdcs_register_pathentries())) goto fail_pdcsreg; return rc; fail_pdcsreg: pdcs_unregister_pathentries(); subsystem_unregister(&paths_subsys); fail_subsysreg: firmware_unregister(&pdc_subsys); fail_firmreg: printk(KERN_INFO "PDC Stable Storage bailing out\n"); return rc; } static void __exit pdc_stable_exit(void) { pdcs_unregister_pathentries(); subsystem_unregister(&paths_subsys); firmware_unregister(&pdc_subsys); } module_init(pdc_stable_init); module_exit(pdc_stable_exit);