/****************************************************************************** * * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, * USA * * The full GNU General Public License is included in this distribution * in the file called LICENSE.GPL. * * Contact Information: * Intel Linux Wireless * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 * * BSD LICENSE * * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * *****************************************************************************/ #ifndef __iwl_trans_h__ #define __iwl_trans_h__ #include #include /* for page_address */ #include "iwl-shared.h" #include "iwl-debug.h" /** * DOC: Transport layer - what is it ? * * The tranport layer is the layer that deals with the HW directly. It provides * an abstraction of the underlying HW to the upper layer. The transport layer * doesn't provide any policy, algorithm or anything of this kind, but only * mechanisms to make the HW do something.It is not completely stateless but * close to it. * We will have an implementation for each different supported bus. */ /** * DOC: Life cycle of the transport layer * * The transport layer has a very precise life cycle. * * 1) A helper function is called during the module initialization and * registers the bus driver's ops with the transport's alloc function. * 2) Bus's probe calls to the transport layer's allocation functions. * Of course this function is bus specific. * 3) This allocation functions will spawn the upper layer which will * register mac80211. * * 4) At some point (i.e. mac80211's start call), the op_mode will call * the following sequence: * start_hw * start_fw * * 5) Then when finished (or reset): * stop_fw (a.k.a. stop device for the moment) * stop_hw * * 6) Eventually, the free function will be called. */ struct iwl_priv; struct iwl_shared; struct iwl_op_mode; struct fw_img; struct sk_buff; struct dentry; /** * DOC: Host command section * * A host command is a commaned issued by the upper layer to the fw. There are * several versions of fw that have several APIs. The transport layer is * completely agnostic to these differences. * The transport does provide helper functionnality (i.e. SYNC / ASYNC mode), */ #define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4) #define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ) #define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4) #define SEQ_TO_QUEUE(s) (((s) >> 8) & 0x1f) #define QUEUE_TO_SEQ(q) (((q) & 0x1f) << 8) #define SEQ_TO_INDEX(s) ((s) & 0xff) #define INDEX_TO_SEQ(i) ((i) & 0xff) #define SEQ_RX_FRAME cpu_to_le16(0x8000) /** * struct iwl_cmd_header * * This header format appears in the beginning of each command sent from the * driver, and each response/notification received from uCode. */ struct iwl_cmd_header { u8 cmd; /* Command ID: REPLY_RXON, etc. */ u8 flags; /* 0:5 reserved, 6 abort, 7 internal */ /* * The driver sets up the sequence number to values of its choosing. * uCode does not use this value, but passes it back to the driver * when sending the response to each driver-originated command, so * the driver can match the response to the command. Since the values * don't get used by uCode, the driver may set up an arbitrary format. * * There is one exception: uCode sets bit 15 when it originates * the response/notification, i.e. when the response/notification * is not a direct response to a command sent by the driver. For * example, uCode issues REPLY_RX when it sends a received frame * to the driver; it is not a direct response to any driver command. * * The Linux driver uses the following format: * * 0:7 tfd index - position within TX queue * 8:12 TX queue id * 13:14 reserved * 15 unsolicited RX or uCode-originated notification */ __le16 sequence; } __packed; #define FH_RSCSR_FRAME_SIZE_MSK 0x00003FFF /* bits 0-13 */ struct iwl_rx_packet { /* * The first 4 bytes of the RX frame header contain both the RX frame * size and some flags. * Bit fields: * 31: flag flush RB request * 30: flag ignore TC (terminal counter) request * 29: flag fast IRQ request * 28-14: Reserved * 13-00: RX frame size */ __le32 len_n_flags; struct iwl_cmd_header hdr; u8 data[]; } __packed; /** * enum CMD_MODE - how to send the host commands ? * * @CMD_SYNC: The caller will be stalled until the fw responds to the command * @CMD_ASYNC: Return right away and don't want for the response * @CMD_WANT_SKB: valid only with CMD_SYNC. The caller needs the buffer of the * response. * @CMD_ON_DEMAND: This command is sent by the test mode pipe. */ enum CMD_MODE { CMD_SYNC = 0, CMD_ASYNC = BIT(0), CMD_WANT_SKB = BIT(1), CMD_ON_DEMAND = BIT(2), }; #define DEF_CMD_PAYLOAD_SIZE 320 /** * struct iwl_device_cmd * * For allocation of the command and tx queues, this establishes the overall * size of the largest command we send to uCode, except for commands that * aren't fully copied and use other TFD space. */ struct iwl_device_cmd { struct iwl_cmd_header hdr; /* uCode API */ u8 payload[DEF_CMD_PAYLOAD_SIZE]; } __packed; #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd)) #define IWL_MAX_CMD_TFDS 2 /** * struct iwl_hcmd_dataflag - flag for each one of the chunks of the command * * IWL_HCMD_DFL_NOCOPY: By default, the command is copied to the host command's * ring. The transport layer doesn't map the command's buffer to DMA, but * rather copies it to an previously allocated DMA buffer. This flag tells * the transport layer not to copy the command, but to map the existing * buffer. This can save memcpy and is worth with very big comamnds. */ enum iwl_hcmd_dataflag { IWL_HCMD_DFL_NOCOPY = BIT(0), }; /** * struct iwl_host_cmd - Host command to the uCode * * @data: array of chunks that composes the data of the host command * @resp_pkt: response packet, if %CMD_WANT_SKB was set * @_rx_page_order: (internally used to free response packet) * @_rx_page_addr: (internally used to free response packet) * @handler_status: return value of the handler of the command * (put in setup_rx_handlers) - valid for SYNC mode only * @flags: can be CMD_* * @len: array of the lenths of the chunks in data * @dataflags: IWL_HCMD_DFL_* * @id: id of the host command */ struct iwl_host_cmd { const void *data[IWL_MAX_CMD_TFDS]; struct iwl_rx_packet *resp_pkt; unsigned long _rx_page_addr; u32 _rx_page_order; int handler_status; u32 flags; u16 len[IWL_MAX_CMD_TFDS]; u8 dataflags[IWL_MAX_CMD_TFDS]; u8 id; }; static inline void iwl_free_resp(struct iwl_host_cmd *cmd) { free_pages(cmd->_rx_page_addr, cmd->_rx_page_order); } struct iwl_rx_cmd_buffer { struct page *_page; unsigned int truesize; }; static inline void *rxb_addr(struct iwl_rx_cmd_buffer *r) { return page_address(r->_page); } static inline struct page *rxb_steal_page(struct iwl_rx_cmd_buffer *r) { struct page *p = r->_page; r->_page = NULL; return p; } #define MAX_NO_RECLAIM_CMDS 6 /** * struct iwl_trans_config - transport configuration * * @op_mode: pointer to the upper layer. * Must be set before any other call. * @cmd_queue: the index of the command queue. * Must be set before start_fw. * @no_reclaim_cmds: Some devices erroneously don't set the * SEQ_RX_FRAME bit on some notifications, this is the * list of such notifications to filter. Max length is * %MAX_NO_RECLAIM_CMDS. * @n_no_reclaim_cmds: # of commands in list */ struct iwl_trans_config { struct iwl_op_mode *op_mode; u8 cmd_queue; const u8 *no_reclaim_cmds; int n_no_reclaim_cmds; }; /** * struct iwl_trans_ops - transport specific operations * * All the handlers MUST be implemented * * @start_hw: starts the HW- from that point on, the HW can send interrupts * May sleep * @stop_hw: stops the HW- from that point on, the HW will be in low power but * will still issue interrupt if the HW RF kill is triggered. * May sleep * @start_fw: allocates and inits all the resources for the transport * layer. Also kick a fw image. * May sleep * @fw_alive: called when the fw sends alive notification * May sleep * @stop_device:stops the whole device (embedded CPU put to reset) * May sleep * @wowlan_suspend: put the device into the correct mode for WoWLAN during * suspend. This is optional, if not implemented WoWLAN will not be * supported. This callback may sleep. * @send_cmd:send a host command * May sleep only if CMD_SYNC is set * @tx: send an skb * Must be atomic * @reclaim: free packet until ssn. Returns a list of freed packets. * Must be atomic * @tx_agg_alloc: allocate resources for a TX BA session * Must be atomic * @tx_agg_setup: setup a tx queue for AMPDU - will be called once the HW is * ready and a successful ADDBA response has been received. * May sleep * @tx_agg_disable: de-configure a Tx queue to send AMPDUs * Must be atomic * @free: release all the ressource for the transport layer itself such as * irq, tasklet etc... From this point on, the device may not issue * any interrupt (incl. RFKILL). * May sleep * @check_stuck_queue: check if a specific queue is stuck * @wait_tx_queue_empty: wait until all tx queues are empty * May sleep * @dbgfs_register: add the dbgfs files under this directory. Files will be * automatically deleted. * @suspend: stop the device unless WoWLAN is configured * @resume: resume activity of the device * @write8: write a u8 to a register at offset ofs from the BAR * @write32: write a u32 to a register at offset ofs from the BAR * @read32: read a u32 register at offset ofs from the BAR * @configure: configure parameters required by the transport layer from * the op_mode. May be called several times before start_fw, can't be * called after that. */ struct iwl_trans_ops { int (*start_hw)(struct iwl_trans *iwl_trans); void (*stop_hw)(struct iwl_trans *iwl_trans); int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw); void (*fw_alive)(struct iwl_trans *trans); void (*stop_device)(struct iwl_trans *trans); void (*wowlan_suspend)(struct iwl_trans *trans); int (*send_cmd)(struct iwl_trans *trans, struct iwl_host_cmd *cmd); int (*tx)(struct iwl_trans *trans, struct sk_buff *skb, struct iwl_device_cmd *dev_cmd, enum iwl_rxon_context_id ctx, u8 sta_id, u8 tid); int (*reclaim)(struct iwl_trans *trans, int sta_id, int tid, int txq_id, int ssn, struct sk_buff_head *skbs); int (*tx_agg_disable)(struct iwl_trans *trans, int sta_id, int tid); int (*tx_agg_alloc)(struct iwl_trans *trans, int sta_id, int tid); void (*tx_agg_setup)(struct iwl_trans *trans, enum iwl_rxon_context_id ctx, int sta_id, int tid, int frame_limit, u16 ssn); void (*free)(struct iwl_trans *trans); int (*dbgfs_register)(struct iwl_trans *trans, struct dentry* dir); int (*check_stuck_queue)(struct iwl_trans *trans, int q); int (*wait_tx_queue_empty)(struct iwl_trans *trans); #ifdef CONFIG_PM_SLEEP int (*suspend)(struct iwl_trans *trans); int (*resume)(struct iwl_trans *trans); #endif void (*write8)(struct iwl_trans *trans, u32 ofs, u8 val); void (*write32)(struct iwl_trans *trans, u32 ofs, u32 val); u32 (*read32)(struct iwl_trans *trans, u32 ofs); void (*configure)(struct iwl_trans *trans, const struct iwl_trans_config *trans_cfg); }; /** * enum iwl_trans_state - state of the transport layer * * @IWL_TRANS_NO_FW: no fw has sent an alive response * @IWL_TRANS_FW_ALIVE: a fw has sent an alive response */ enum iwl_trans_state { IWL_TRANS_NO_FW = 0, IWL_TRANS_FW_ALIVE = 1, }; /** * struct iwl_trans - transport common data * * @ops - pointer to iwl_trans_ops * @op_mode - pointer to the op_mode * @shrd - pointer to iwl_shared which holds shared data from the upper layer * @reg_lock - protect hw register access * @dev - pointer to struct device * that represents the device * @hw_id: a u32 with the ID of the device / subdevice. * Set during transport allocation. * @hw_id_str: a string with info about HW ID. Set during transport allocation. * @nvm_device_type: indicates OTP or eeprom * @pm_support: set to true in start_hw if link pm is supported * @wait_command_queue: the wait_queue for SYNC host commands */ struct iwl_trans { const struct iwl_trans_ops *ops; struct iwl_op_mode *op_mode; struct iwl_shared *shrd; enum iwl_trans_state state; spinlock_t reg_lock; struct device *dev; u32 hw_rev; u32 hw_id; char hw_id_str[52]; int nvm_device_type; bool pm_support; wait_queue_head_t wait_command_queue; /* pointer to trans specific struct */ /*Ensure that this pointer will always be aligned to sizeof pointer */ char trans_specific[0] __aligned(sizeof(void *)); }; static inline void iwl_trans_configure(struct iwl_trans *trans, const struct iwl_trans_config *trans_cfg) { /* * only set the op_mode for the moment. Later on, this function will do * more */ trans->op_mode = trans_cfg->op_mode; trans->ops->configure(trans, trans_cfg); } static inline int iwl_trans_start_hw(struct iwl_trans *trans) { might_sleep(); return trans->ops->start_hw(trans); } static inline void iwl_trans_stop_hw(struct iwl_trans *trans) { might_sleep(); trans->ops->stop_hw(trans); trans->state = IWL_TRANS_NO_FW; } static inline void iwl_trans_fw_alive(struct iwl_trans *trans) { might_sleep(); trans->ops->fw_alive(trans); trans->state = IWL_TRANS_FW_ALIVE; } static inline int iwl_trans_start_fw(struct iwl_trans *trans, const struct fw_img *fw) { might_sleep(); return trans->ops->start_fw(trans, fw); } static inline void iwl_trans_stop_device(struct iwl_trans *trans) { might_sleep(); trans->ops->stop_device(trans); trans->state = IWL_TRANS_NO_FW; } static inline void iwl_trans_wowlan_suspend(struct iwl_trans *trans) { might_sleep(); trans->ops->wowlan_suspend(trans); } static inline int iwl_trans_send_cmd(struct iwl_trans *trans, struct iwl_host_cmd *cmd) { WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, "%s bad state = %d", __func__, trans->state); return trans->ops->send_cmd(trans, cmd); } static inline int iwl_trans_tx(struct iwl_trans *trans, struct sk_buff *skb, struct iwl_device_cmd *dev_cmd, enum iwl_rxon_context_id ctx, u8 sta_id, u8 tid) { if (trans->state != IWL_TRANS_FW_ALIVE) IWL_ERR(trans, "%s bad state = %d", __func__, trans->state); return trans->ops->tx(trans, skb, dev_cmd, ctx, sta_id, tid); } static inline int iwl_trans_reclaim(struct iwl_trans *trans, int sta_id, int tid, int txq_id, int ssn, struct sk_buff_head *skbs) { WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, "%s bad state = %d", __func__, trans->state); return trans->ops->reclaim(trans, sta_id, tid, txq_id, ssn, skbs); } static inline int iwl_trans_tx_agg_disable(struct iwl_trans *trans, int sta_id, int tid) { WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, "%s bad state = %d", __func__, trans->state); return trans->ops->tx_agg_disable(trans, sta_id, tid); } static inline int iwl_trans_tx_agg_alloc(struct iwl_trans *trans, int sta_id, int tid) { WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, "%s bad state = %d", __func__, trans->state); return trans->ops->tx_agg_alloc(trans, sta_id, tid); } static inline void iwl_trans_tx_agg_setup(struct iwl_trans *trans, enum iwl_rxon_context_id ctx, int sta_id, int tid, int frame_limit, u16 ssn) { might_sleep(); WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, "%s bad state = %d", __func__, trans->state); trans->ops->tx_agg_setup(trans, ctx, sta_id, tid, frame_limit, ssn); } static inline void iwl_trans_free(struct iwl_trans *trans) { trans->ops->free(trans); } static inline int iwl_trans_wait_tx_queue_empty(struct iwl_trans *trans) { WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, "%s bad state = %d", __func__, trans->state); return trans->ops->wait_tx_queue_empty(trans); } static inline int iwl_trans_check_stuck_queue(struct iwl_trans *trans, int q) { WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, "%s bad state = %d", __func__, trans->state); return trans->ops->check_stuck_queue(trans, q); } static inline int iwl_trans_dbgfs_register(struct iwl_trans *trans, struct dentry *dir) { return trans->ops->dbgfs_register(trans, dir); } #ifdef CONFIG_PM_SLEEP static inline int iwl_trans_suspend(struct iwl_trans *trans) { return trans->ops->suspend(trans); } static inline int iwl_trans_resume(struct iwl_trans *trans) { return trans->ops->resume(trans); } #endif static inline void iwl_trans_write8(struct iwl_trans *trans, u32 ofs, u8 val) { trans->ops->write8(trans, ofs, val); } static inline void iwl_trans_write32(struct iwl_trans *trans, u32 ofs, u32 val) { trans->ops->write32(trans, ofs, val); } static inline u32 iwl_trans_read32(struct iwl_trans *trans, u32 ofs) { return trans->ops->read32(trans, ofs); } /***************************************************** * Transport layers implementations + their allocation function ******************************************************/ struct pci_dev; struct pci_device_id; extern const struct iwl_trans_ops trans_ops_pcie; struct iwl_trans *iwl_trans_pcie_alloc(struct iwl_shared *shrd, struct pci_dev *pdev, const struct pci_device_id *ent); int __must_check iwl_pci_register_driver(void); void iwl_pci_unregister_driver(void); extern const struct iwl_trans_ops trans_ops_idi; struct iwl_trans *iwl_trans_idi_alloc(struct iwl_shared *shrd, void *pdev_void, const void *ent_void); #endif /* __iwl_trans_h__ */