/* * sama5d3xmb.dts - Device Tree file for SAMA5D3x mother board * * Copyright (C) 2013 Atmel, * 2013 Ludovic Desroches * * Licensed under GPLv2 or later. */ /include/ "sama5d3xcm.dtsi" / { compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; ahb { apb { mmc0: mmc@f0000000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; status = "okay"; slot@0 { reg = <0>; bus-width = <4>; cd-gpios = <&pioD 17 0>; }; }; spi0: spi@f0004000 { m25p80@0 { compatible = "atmel,at25df321a"; spi-max-frequency = <50000000>; reg = <0>; }; }; /* * i2c0 conflicts with ISI: * disable it to allow the use of ISI * can not enable audio when i2c0 disabled */ i2c0: i2c@f0014000 { wm8904: wm8904@1a { compatible = "wm8904"; reg = <0x1a>; }; }; usart1: serial@f0020000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; status = "okay"; }; isi: isi@f0034000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_isi &pinctrl_isi_pck_as_mck &pinctrl_isi_power &pinctrl_isi_reset>; }; mmc1: mmc@f8000000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; status = "okay"; slot@0 { reg = <0>; bus-width = <4>; cd-gpios = <&pioD 18 0>; }; }; adc0: adc@f8018000 { pinctrl-names = "default"; pinctrl-0 = < &pinctrl_adc0_adtrg &pinctrl_adc0_ad0 &pinctrl_adc0_ad1 &pinctrl_adc0_ad2 &pinctrl_adc0_ad3 &pinctrl_adc0_ad4 >; status = "okay"; }; macb1: ethernet@f802c000 { phy-mode = "rmii"; }; pinctrl@fffff200 { board { pinctrl_mmc0_cd: mmc0_cd { atmel,pins = <3 17 0x0 0x5>; /* PD17 GPIO with pullup deglitch */ }; pinctrl_mmc1_cd: mmc1_cd { atmel,pins = <3 18 0x0 0x5>; /* PD18 GPIO with pullup deglitch */ }; pinctrl_pck0_as_audio_mck: pck0_as_audio_mck { atmel,pins = <3 30 0x2 0x0>; /* PD30 periph B */ }; pinctrl_isi_reset: isi_reset-0 { atmel,pins = <4 24 0x0 0x0>; /* PE24 gpio */ }; pinctrl_isi_power: isi_power-0 { atmel,pins = <4 29 0x0 0x0>; /* PE29 gpio */ }; pinctrl_usba_vbus: usba_vbus { atmel,pins = <3 29 0x0 0x4>; /* PD29 GPIO with deglitch */ }; }; }; dbgu: serial@ffffee00 { status = "okay"; }; watchdog@fffffe40 { status = "okay"; }; }; usb0: gadget@00500000 { atmel,vbus-gpio = <&pioD 29 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; usb1: ohci@00600000 { num-ports = <3>; atmel,vbus-gpio = <&pioD 25 0 &pioD 26 1 &pioD 27 1 >; status = "okay"; }; usb2: ehci@00700000 { status = "okay"; }; }; sound { compatible = "atmel,sama5d3ek-wm8904"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pck0_as_audio_mck>; atmel,model = "wm8904 @ SAMA5D3EK"; atmel,audio-routing = "Headphone Jack", "HPOUTL", "Headphone Jack", "HPOUTR", "IN2L", "Line In Jack", "IN2R", "Line In Jack", "IN1L", "Mic"; atmel,ssc-controller = <&ssc0>; atmel,audio-codec = <&wm8904>; }; };