/dts-v1/; /include/ "kirkwood.dtsi" /include/ "kirkwood-6281.dtsi" / { model = "Iomega StorCenter ix2-200"; compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood"; memory { device_type = "memory"; reg = <0x00000000 0x10000000>; }; chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; }; ocp@f1000000 { pinctrl: pinctrl@10000 { pinctrl-0 = < &pmx_button_reset &pmx_button_power &pmx_led_backup &pmx_led_power &pmx_button_otb &pmx_led_rebuild &pmx_led_health &pmx_led_sata_brt_ctrl_1 &pmx_led_sata_brt_ctrl_2 &pmx_led_backup_brt_ctrl_1 &pmx_led_backup_brt_ctrl_2 &pmx_led_power_brt_ctrl_1 &pmx_led_power_brt_ctrl_2 &pmx_led_health_brt_ctrl_1 &pmx_led_health_brt_ctrl_2 &pmx_led_rebuild_brt_ctrl_1 &pmx_led_rebuild_brt_ctrl_2 >; pinctrl-names = "default"; pmx_button_reset: pmx-button-reset { marvell,pins = "mpp12"; marvell,function = "gpio"; }; pmx_button_power: pmx-button-power { marvell,pins = "mpp14"; marvell,function = "gpio"; }; pmx_led_backup: pmx-led-backup { marvell,pins = "mpp15"; marvell,function = "gpio"; }; pmx_led_power: pmx-led-power { marvell,pins = "mpp16"; marvell,function = "gpio"; }; pmx_button_otb: pmx-button-otb { marvell,pins = "mpp35"; marvell,function = "gpio"; }; pmx_led_rebuild: pmx-led-rebuild { marvell,pins = "mpp36"; marvell,function = "gpio"; }; pmx_led_health: pmx-led_health { marvell,pins = "mpp37"; marvell,function = "gpio"; }; pmx_led_sata_brt_ctrl_1: pmx-led-sata-brt-ctrl-1 { marvell,pins = "mpp38"; marvell,function = "gpio"; }; pmx_led_sata_brt_ctrl_2: pmx-led-sata-brt-ctrl-2 { marvell,pins = "mpp39"; marvell,function = "gpio"; }; pmx_led_backup_brt_ctrl_1: pmx-led-backup-brt-ctrl-1 { marvell,pins = "mpp40"; marvell,function = "gpio"; }; pmx_led_backup_brt_ctrl_2: pmx-led-backup-brt-ctrl-2 { marvell,pins = "mpp41"; marvell,function = "gpio"; }; pmx_led_power_brt_ctrl_1: pmx-led-power-brt-ctrl-1 { marvell,pins = "mpp42"; marvell,function = "gpio"; }; pmx_led_power_brt_ctrl_2: pmx-led-power-brt-ctrl-2 { marvell,pins = "mpp43"; marvell,function = "gpio"; }; pmx_led_health_brt_ctrl_1: pmx-led-health-brt-ctrl-1 { marvell,pins = "mpp44"; marvell,function = "gpio"; }; pmx_led_health_brt_ctrl_2: pmx-led-health-brt-ctrl-2 { marvell,pins = "mpp45"; marvell,function = "gpio"; }; pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 { marvell,pins = "mpp46"; marvell,function = "gpio"; }; pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 { marvell,pins = "mpp47"; marvell,function = "gpio"; }; }; i2c@11000 { status = "okay"; lm63: lm63@4c { compatible = "national,lm63"; reg = <0x4c>; }; }; serial@12000 { status = "ok"; }; nand@3000000 { status = "okay"; partition@0 { label = "u-boot"; reg = <0x0000000 0x100000>; read-only; }; partition@a0000 { label = "env"; reg = <0xa0000 0x20000>; read-only; }; partition@100000 { label = "uImage"; reg = <0x100000 0x300000>; }; partition@400000 { label = "uInitrd"; reg = <0x540000 0x1000000>; }; }; sata@80000 { status = "okay"; nr-ports = <2>; }; }; gpio-leds { compatible = "gpio-leds"; power_led { label = "status:white:power_led"; gpios = <&gpio0 16 0>; linux,default-trigger = "default-on"; }; rebuild_led { label = "status:white:rebuild_led"; gpios = <&gpio1 4 0>; }; health_led { label = "status:red:health_led"; gpios = <&gpio1 5 0>; }; backup_led { label = "status:blue:backup_led"; gpios = <&gpio0 15 0>; }; }; gpio-keys { compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; Power { label = "Power Button"; linux,code = <116>; gpios = <&gpio0 14 1>; }; Reset { label = "Reset Button"; linux,code = <0x198>; gpios = <&gpio0 12 1>; }; OTB { label = "OTB Button"; linux,code = <133>; gpios = <&gpio1 3 1>; }; }; };