From 0ce36c5f7f87632f26c8fbefe68b5116eda152d2 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 13 Mar 2009 14:26:08 +0000 Subject: ASoC: Fix non-networked I2S mode for PXA SSP Two issues are fixed here: - I2S transmits the left frame with the clock low but I don't seem to get LRCLK out without SFRMDLY being set so invert SFRMP and set a delay. - I2S has a clock cycle prior to the first data byte in each channel so we need to delay the data by one cycle. Tested-by: Daniel Mack Signed-off-by: Mark Brown --- sound/soc/pxa/pxa-ssp.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) (limited to 'sound') diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index 4dd0d7c5722..b0bf40973d5 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -1,4 +1,3 @@ -#define DEBUG /* * pxa-ssp.c -- ALSA Soc Audio Layer * @@ -561,14 +560,15 @@ static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai, sscr0 |= SSCR0_PSP; sscr1 |= SSCR1_RWOT | SSCR1_TRAIL; + /* See hw_params() */ switch (fmt & SND_SOC_DAIFMT_INV_MASK) { case SND_SOC_DAIFMT_NB_NF: + sspsp |= SSPSP_SFRMP; break; case SND_SOC_DAIFMT_NB_IF: - sspsp |= SSPSP_SFRMP; break; case SND_SOC_DAIFMT_IB_IF: - sspsp |= SSPSP_SFRMP | SSPSP_SCMODE(3); + sspsp |= SSPSP_SCMODE(3); break; default: return -EINVAL; @@ -691,8 +691,17 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, #else return -EINVAL; #endif - } else - sspsp |= SSPSP_SFRMWDTH(width); + } else { + /* The frame width is the width the LRCLK is + * asserted for; the delay is expressed in + * half cycle units. We need the extra cycle + * because the data starts clocking out one BCLK + * after LRCLK changes polarity. + */ + sspsp |= SSPSP_SFRMWDTH(width + 1); + sspsp |= SSPSP_SFRMDLY((width + 1) * 2); + sspsp |= SSPSP_DMYSTRT(1); + } ssp_write_reg(ssp, SSPSP, sspsp); break; -- cgit v1.2.3