From f0fba2ad1b6b53d5360125c41953b7afcd6deff0 Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Wed, 17 Mar 2010 20:15:21 +0000 Subject: ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi Signed-off-by: Janusz Krzysztofik Signed-off-by: Jarkko Nikula Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi Signed-off-by: Joonyoung Shim Signed-off-by: Kyungmin Park Reviewed-by: Jassi Brar Signed-off-by: Seungwhan Youn MPC8610 and PPC fixes. Signed-off-by: Timur Tabi i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen CC: Tony Lindgren CC: Nicolas Ferre CC: Kevin Hilman CC: Sascha Hauer CC: Atsushi Nemoto CC: Kuninori Morimoto CC: Daniel Gloeckner CC: Manuel Lauss CC: Mike Frysinger CC: Arnaud Patard CC: Wan ZongShun Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- sound/soc/codecs/wm8903.c | 268 +++++++++++++++++----------------------------- 1 file changed, 96 insertions(+), 172 deletions(-) (limited to 'sound/soc/codecs/wm8903.c') diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c index bf08282d5ee..f5d73ed72cb 100644 --- a/sound/soc/codecs/wm8903.c +++ b/sound/soc/codecs/wm8903.c @@ -213,10 +213,12 @@ static u16 wm8903_reg_defaults[] = { }; struct wm8903_priv { - struct snd_soc_codec codec; + u16 reg_cache[ARRAY_SIZE(wm8903_reg_defaults)]; int sysclk; + struct i2c_client *control_data; + int irq; /* Reference counts */ int class_w_users; @@ -252,7 +254,6 @@ static int wm8903_volatile_register(unsigned int reg) static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start) { u16 reg[5]; - struct i2c_client *i2c = codec->control_data; struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); BUG_ON(start > 48); @@ -262,7 +263,7 @@ static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start) snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0, reg[0] | WM8903_WSEQ_ENA); - dev_dbg(&i2c->dev, "Starting sequence at %d\n", start); + dev_dbg(codec->dev, "Starting sequence at %d\n", start); snd_soc_write(codec, WM8903_WRITE_SEQUENCER_3, start | WM8903_WSEQ_START); @@ -277,7 +278,7 @@ static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start) reg[4] = snd_soc_read(codec, WM8903_WRITE_SEQUENCER_4); } while (reg[4] & WM8903_WSEQ_BUSY); - dev_dbg(&i2c->dev, "Sequence complete\n"); + dev_dbg(codec->dev, "Sequence complete\n"); /* Disable the sequencer again if we enabled it */ snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0, reg[0]); @@ -422,7 +423,6 @@ static int wm8903_class_w_put(struct snd_kcontrol *kcontrol, struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol); struct snd_soc_codec *codec = widget->codec; struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); - struct i2c_client *i2c = codec->control_data; u16 reg; int ret; @@ -431,7 +431,7 @@ static int wm8903_class_w_put(struct snd_kcontrol *kcontrol, /* Turn it off if we're about to enable bypass */ if (ucontrol->value.integer.value[0]) { if (wm8903->class_w_users == 0) { - dev_dbg(&i2c->dev, "Disabling Class W\n"); + dev_dbg(codec->dev, "Disabling Class W\n"); snd_soc_write(codec, WM8903_CLASS_W_0, reg & ~(WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V)); } @@ -444,14 +444,14 @@ static int wm8903_class_w_put(struct snd_kcontrol *kcontrol, /* If we've just disabled the last bypass path turn Class W on */ if (!ucontrol->value.integer.value[0]) { if (wm8903->class_w_users == 1) { - dev_dbg(&i2c->dev, "Enabling Class W\n"); + dev_dbg(codec->dev, "Enabling Class W\n"); snd_soc_write(codec, WM8903_CLASS_W_0, reg | WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V); } wm8903->class_w_users--; } - dev_dbg(&i2c->dev, "Bypass use count now %d\n", + dev_dbg(codec->dev, "Bypass use count now %d\n", wm8903->class_w_users); return ret; @@ -935,7 +935,6 @@ static int wm8903_add_widgets(struct snd_soc_codec *codec) static int wm8903_set_bias_level(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { - struct i2c_client *i2c = codec->control_data; u16 reg, reg2; switch (level) { @@ -974,7 +973,7 @@ static int wm8903_set_bias_level(struct snd_soc_codec *codec, /* By default no bypass paths are enabled so * enable Class W support. */ - dev_dbg(&i2c->dev, "Enabling Class W\n"); + dev_dbg(codec->dev, "Enabling Class W\n"); snd_soc_write(codec, WM8903_CLASS_W_0, reg | WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V); } @@ -1228,10 +1227,8 @@ static int wm8903_startup(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->card->codec; + struct snd_soc_codec *codec = rtd->codec; struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); - struct i2c_client *i2c = codec->control_data; struct snd_pcm_runtime *master_runtime; if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) @@ -1245,7 +1242,7 @@ static int wm8903_startup(struct snd_pcm_substream *substream, if (wm8903->master_substream) { master_runtime = wm8903->master_substream->runtime; - dev_dbg(&i2c->dev, "Constraining to %d bits\n", + dev_dbg(codec->dev, "Constraining to %d bits\n", master_runtime->sample_bits); snd_pcm_hw_constraint_minmax(substream->runtime, @@ -1264,8 +1261,7 @@ static void wm8903_shutdown(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->card->codec; + struct snd_soc_codec *codec = rtd->codec; struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) @@ -1284,10 +1280,8 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->card->codec; + struct snd_soc_codec *codec =rtd->codec; struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); - struct i2c_client *i2c = codec->control_data; int fs = params_rate(params); int bclk; int bclk_div; @@ -1306,7 +1300,7 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream, u16 dac_digital1 = snd_soc_read(codec, WM8903_DAC_DIGITAL_1); if (substream == wm8903->slave_substream) { - dev_dbg(&i2c->dev, "Ignoring hw_params for slave substream\n"); + dev_dbg(codec->dev, "Ignoring hw_params for slave substream\n"); return 0; } @@ -1332,7 +1326,7 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream, switch (sample_rates[dsp_config].rate) { case 88200: case 96000: - dev_err(&i2c->dev, "%dHz unsupported by ADC\n", + dev_err(codec->dev, "%dHz unsupported by ADC\n", fs); return -EINVAL; @@ -1340,7 +1334,7 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream, break; } - dev_dbg(&i2c->dev, "DSP fs = %dHz\n", sample_rates[dsp_config].rate); + dev_dbg(codec->dev, "DSP fs = %dHz\n", sample_rates[dsp_config].rate); clock1 &= ~WM8903_SAMPLE_RATE_MASK; clock1 |= sample_rates[dsp_config].value; @@ -1366,7 +1360,7 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream, return -EINVAL; } - dev_dbg(&i2c->dev, "MCLK = %dHz, target sample rate = %dHz\n", + dev_dbg(codec->dev, "MCLK = %dHz, target sample rate = %dHz\n", wm8903->sysclk, fs); /* We may not have an MCLK which allows us to generate exactly @@ -1401,12 +1395,12 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream, clock1 |= clk_sys_ratios[clk_config].rate << WM8903_CLK_SYS_RATE_SHIFT; clock1 |= clk_sys_ratios[clk_config].mode << WM8903_CLK_SYS_MODE_SHIFT; - dev_dbg(&i2c->dev, "CLK_SYS_RATE=%x, CLK_SYS_MODE=%x div=%d\n", + dev_dbg(codec->dev, "CLK_SYS_RATE=%x, CLK_SYS_MODE=%x div=%d\n", clk_sys_ratios[clk_config].rate, clk_sys_ratios[clk_config].mode, clk_sys_ratios[clk_config].div); - dev_dbg(&i2c->dev, "Actual CLK_SYS = %dHz\n", clk_sys); + dev_dbg(codec->dev, "Actual CLK_SYS = %dHz\n", clk_sys); /* We may not get quite the right frequency if using * approximate clocks so look for the closest match that is @@ -1428,7 +1422,7 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream, aif2 &= ~WM8903_BCLK_DIV_MASK; aif3 &= ~WM8903_LRCLK_RATE_MASK; - dev_dbg(&i2c->dev, "BCLK ratio %d for %dHz - actual BCLK = %dHz\n", + dev_dbg(codec->dev, "BCLK ratio %d for %dHz - actual BCLK = %dHz\n", bclk_divs[bclk_div].ratio / 10, bclk, (clk_sys * 10) / bclk_divs[bclk_div].ratio); @@ -1504,8 +1498,8 @@ EXPORT_SYMBOL_GPL(wm8903_mic_detect); static irqreturn_t wm8903_irq(int irq, void *data) { - struct wm8903_priv *wm8903 = data; - struct snd_soc_codec *codec = &wm8903->codec; + struct snd_soc_codec *codec = data; + struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); int mic_report; int int_pol; int int_val = 0; @@ -1586,8 +1580,8 @@ static struct snd_soc_dai_ops wm8903_dai_ops = { .set_sysclk = wm8903_set_dai_sysclk, }; -struct snd_soc_dai wm8903_dai = { - .name = "WM8903", +static struct snd_soc_dai_driver wm8903_dai = { + .name = "wm8903-hifi", .playback = { .stream_name = "Playback", .channels_min = 2, @@ -1605,23 +1599,16 @@ struct snd_soc_dai wm8903_dai = { .ops = &wm8903_dai_ops, .symmetric_rates = 1, }; -EXPORT_SYMBOL_GPL(wm8903_dai); -static int wm8903_suspend(struct platform_device *pdev, pm_message_t state) +static int wm8903_suspend(struct snd_soc_codec *codec, pm_message_t state) { - struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->card->codec; - wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF); return 0; } -static int wm8903_resume(struct platform_device *pdev) +static int wm8903_resume(struct snd_soc_codec *codec) { - struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->card->codec; - struct i2c_client *i2c = codec->control_data; int i; u16 *reg_cache = codec->reg_cache; u16 *tmp_cache = kmemdup(reg_cache, sizeof(wm8903_reg_defaults), @@ -1637,65 +1624,38 @@ static int wm8903_resume(struct platform_device *pdev) snd_soc_write(codec, i, tmp_cache[i]); kfree(tmp_cache); } else { - dev_err(&i2c->dev, "Failed to allocate temporary cache\n"); + dev_err(codec->dev, "Failed to allocate temporary cache\n"); } return 0; } -static struct snd_soc_codec *wm8903_codec; - -static __devinit int wm8903_i2c_probe(struct i2c_client *i2c, - const struct i2c_device_id *id) +static int wm8903_probe(struct snd_soc_codec *codec) { - struct wm8903_platform_data *pdata = dev_get_platdata(&i2c->dev); - struct wm8903_priv *wm8903; - struct snd_soc_codec *codec; + struct wm8903_platform_data *pdata = dev_get_platdata(codec->dev); + struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); int ret, i; int trigger, irq_pol; u16 val; - wm8903 = kzalloc(sizeof(struct wm8903_priv), GFP_KERNEL); - if (wm8903 == NULL) - return -ENOMEM; - - codec = &wm8903->codec; - - mutex_init(&codec->mutex); - INIT_LIST_HEAD(&codec->dapm_widgets); - INIT_LIST_HEAD(&codec->dapm_paths); - - codec->dev = &i2c->dev; - codec->name = "WM8903"; - codec->owner = THIS_MODULE; - codec->bias_level = SND_SOC_BIAS_OFF; - codec->set_bias_level = wm8903_set_bias_level; - codec->dai = &wm8903_dai; - codec->num_dai = 1; - codec->reg_cache_size = ARRAY_SIZE(wm8903->reg_cache); - codec->reg_cache = &wm8903->reg_cache[0]; - snd_soc_codec_set_drvdata(codec, wm8903); - codec->volatile_register = wm8903_volatile_register; init_completion(&wm8903->wseq); - - i2c_set_clientdata(i2c, codec); - codec->control_data = i2c; + codec->control_data = wm8903->control_data; ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C); if (ret != 0) { - dev_err(&i2c->dev, "Failed to set cache I/O: %d\n", ret); - goto err; + dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); + return ret; } val = snd_soc_read(codec, WM8903_SW_RESET_AND_ID); if (val != wm8903_reg_defaults[WM8903_SW_RESET_AND_ID]) { - dev_err(&i2c->dev, + dev_err(codec->dev, "Device with ID register %x is not a WM8903\n", val); return -ENODEV; } val = snd_soc_read(codec, WM8903_REVISION_NUMBER); - dev_info(&i2c->dev, "WM8903 revision %d\n", + dev_info(codec->dev, "WM8903 revision %d\n", val & WM8903_CHIP_REV_MASK); wm8903_reset(codec); @@ -1721,7 +1681,7 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c, wm8903->mic_delay = pdata->micdet_delay; } - if (i2c->irq) { + if (wm8903->irq) { if (pdata && pdata->irq_active_low) { trigger = IRQF_TRIGGER_LOW; irq_pol = WM8903_IRQ_POL; @@ -1733,13 +1693,13 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c, snd_soc_update_bits(codec, WM8903_INTERRUPT_CONTROL, WM8903_IRQ_POL, irq_pol); - ret = request_threaded_irq(i2c->irq, NULL, wm8903_irq, + ret = request_threaded_irq(wm8903->irq, NULL, wm8903_irq, trigger | IRQF_ONESHOT, - "wm8903", wm8903); + "wm8903", codec); if (ret != 0) { - dev_err(&i2c->dev, "Failed to request IRQ: %d\n", + dev_err(codec->dev, "Failed to request IRQ: %d\n", ret); - goto err; + return ret; } /* Enable write sequencer interrupts */ @@ -1781,133 +1741,97 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c, val |= WM8903_DAC_MUTEMODE; snd_soc_write(codec, WM8903_DAC_DIGITAL_1, val); - wm8903_dai.dev = &i2c->dev; - wm8903_codec = codec; - - ret = snd_soc_register_codec(codec); - if (ret != 0) { - dev_err(&i2c->dev, "Failed to register codec: %d\n", ret); - goto err_irq; - } - - ret = snd_soc_register_dai(&wm8903_dai); - if (ret != 0) { - dev_err(&i2c->dev, "Failed to register DAI: %d\n", ret); - goto err_codec; - } - - return ret; + snd_soc_add_controls(codec, wm8903_snd_controls, + ARRAY_SIZE(wm8903_snd_controls)); + wm8903_add_widgets(codec); -err_codec: - snd_soc_unregister_codec(codec); -err_irq: - if (i2c->irq) - free_irq(i2c->irq, wm8903); -err: - wm8903_codec = NULL; - kfree(wm8903); return ret; } -static __devexit int wm8903_i2c_remove(struct i2c_client *client) +/* power down chip */ +static int wm8903_remove(struct snd_soc_codec *codec) { - struct snd_soc_codec *codec = i2c_get_clientdata(client); - struct wm8903_priv *priv = snd_soc_codec_get_drvdata(codec); + wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF); + return 0; +} - snd_soc_unregister_dai(&wm8903_dai); - snd_soc_unregister_codec(codec); +static struct snd_soc_codec_driver soc_codec_dev_wm8903 = { + .probe = wm8903_probe, + .remove = wm8903_remove, + .suspend = wm8903_suspend, + .resume = wm8903_resume, + .set_bias_level = wm8903_set_bias_level, + .reg_cache_size = ARRAY_SIZE(wm8903_reg_defaults), + .reg_word_size = sizeof(u16), + .reg_cache_default = wm8903_reg_defaults, + .volatile_register = wm8903_volatile_register, +}; - wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF); +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) +static __devinit int wm8903_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct wm8903_priv *wm8903; + int ret; - if (client->irq) - free_irq(client->irq, priv); + wm8903 = kzalloc(sizeof(struct wm8903_priv), GFP_KERNEL); + if (wm8903 == NULL) + return -ENOMEM; - kfree(priv); + i2c_set_clientdata(i2c, wm8903); + wm8903->control_data = i2c; + wm8903->irq = i2c->irq; - wm8903_codec = NULL; - wm8903_dai.dev = NULL; + ret = snd_soc_register_codec(&i2c->dev, + &soc_codec_dev_wm8903, &wm8903_dai, 1); + if (ret < 0) + kfree(wm8903); + return ret; +} +static __devexit int wm8903_i2c_remove(struct i2c_client *client) +{ + snd_soc_unregister_codec(&client->dev); + kfree(i2c_get_clientdata(client)); return 0; } -/* i2c codec control layer */ static const struct i2c_device_id wm8903_i2c_id[] = { - { "wm8903", 0 }, - { } + { "wm8903", 0 }, + { } }; MODULE_DEVICE_TABLE(i2c, wm8903_i2c_id); static struct i2c_driver wm8903_i2c_driver = { .driver = { - .name = "WM8903", + .name = "wm8903-codec", .owner = THIS_MODULE, }, - .probe = wm8903_i2c_probe, - .remove = __devexit_p(wm8903_i2c_remove), + .probe = wm8903_i2c_probe, + .remove = __devexit_p(wm8903_i2c_remove), .id_table = wm8903_i2c_id, }; +#endif -static int wm8903_probe(struct platform_device *pdev) +static int __init wm8903_modinit(void) { - struct snd_soc_device *socdev = platform_get_drvdata(pdev); int ret = 0; - - if (!wm8903_codec) { - dev_err(&pdev->dev, "I2C device not yet probed\n"); - goto err; - } - - socdev->card->codec = wm8903_codec; - - /* register pcms */ - ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); - if (ret < 0) { - dev_err(&pdev->dev, "failed to create pcms\n"); - goto err; +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + ret = i2c_add_driver(&wm8903_i2c_driver); + if (ret != 0) { + printk(KERN_ERR "Failed to register wm8903 I2C driver: %d\n", + ret); } - - snd_soc_add_controls(socdev->card->codec, wm8903_snd_controls, - ARRAY_SIZE(wm8903_snd_controls)); - wm8903_add_widgets(socdev->card->codec); - +#endif return ret; - -err: - return ret; -} - -/* power down chip */ -static int wm8903_remove(struct platform_device *pdev) -{ - struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->card->codec; - - if (codec->control_data) - wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF); - - snd_soc_free_pcms(socdev); - snd_soc_dapm_free(socdev); - - return 0; -} - -struct snd_soc_codec_device soc_codec_dev_wm8903 = { - .probe = wm8903_probe, - .remove = wm8903_remove, - .suspend = wm8903_suspend, - .resume = wm8903_resume, -}; -EXPORT_SYMBOL_GPL(soc_codec_dev_wm8903); - -static int __init wm8903_modinit(void) -{ - return i2c_add_driver(&wm8903_i2c_driver); } module_init(wm8903_modinit); static void __exit wm8903_exit(void) { +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) i2c_del_driver(&wm8903_i2c_driver); +#endif } module_exit(wm8903_exit); -- cgit v1.2.3