From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- include/linux/sdlapci.h | 72 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) create mode 100644 include/linux/sdlapci.h (limited to 'include/linux/sdlapci.h') diff --git a/include/linux/sdlapci.h b/include/linux/sdlapci.h new file mode 100644 index 00000000000..6f7c904f188 --- /dev/null +++ b/include/linux/sdlapci.h @@ -0,0 +1,72 @@ +/***************************************************************************** +* sdlapci.h WANPIPE(tm) Multiprotocol WAN Link Driver. +* Definitions for the SDLA PCI adapter. +* +* Author: Gideon Hack +* +* Copyright: (c) 1999-2000 Sangoma Technologies Inc. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* as published by the Free Software Foundation; either version +* 2 of the License, or (at your option) any later version. +* ============================================================================ +* Jun 02, 1999 Gideon Hack Initial version. +*****************************************************************************/ +#ifndef _SDLAPCI_H +#define _SDLAPCI_H + +/****** Defines *************************************************************/ + +/* Definitions for identifying and finding S514 PCI adapters */ +#define V3_VENDOR_ID 0x11B0 /* V3 vendor ID number */ +#define V3_DEVICE_ID 0x0002 /* V3 device ID number */ +#define SANGOMA_SUBSYS_VENDOR 0x4753 /* ID for Sangoma */ +#define PCI_DEV_SLOT_MASK 0x1F /* mask for slot numbering */ +#define PCI_IRQ_NOT_ALLOCATED 0xFF /* interrupt line for no IRQ */ + +/* Local PCI register offsets */ +#define PCI_VENDOR_ID_WORD 0x00 /* vendor ID */ +#define PCI_IO_BASE_DWORD 0x10 /* IO base */ +#define PCI_MEM_BASE0_DWORD 0x14 /* memory base - apperture 0 */ +#define PCI_MEM_BASE1_DWORD 0x18 /* memory base - apperture 1 */ +#define PCI_SUBSYS_VENDOR_WORD 0x2C /* subsystem vendor ID */ +#define PCI_INT_LINE_BYTE 0x3C /* interrupt line */ +#define PCI_INT_PIN_BYTE 0x3D /* interrupt pin */ +#define PCI_MAP0_DWORD 0x40 /* PCI to local bus address 0 */ +#define PCI_MAP1_DWORD 0x44 /* PCI to local bus address 1 */ +#define PCI_INT_STATUS 0x48 /* interrupt status */ +#define PCI_INT_CONFIG 0x4C /* interrupt configuration */ + +/* Local PCI register usage */ +#define PCI_MEMORY_ENABLE 0x00000003 /* enable PCI memory */ +#define PCI_CPU_A_MEM_DISABLE 0x00000002 /* disable CPU A memory */ +#define PCI_CPU_B_MEM_DISABLE 0x00100002 /* disable CPU B memory */ +#define PCI_ENABLE_IRQ_CPU_A 0x005A0004 /* enable IRQ for CPU A */ +#define PCI_ENABLE_IRQ_CPU_B 0x005A0008 /* enable IRQ for CPU B */ +#define PCI_DISABLE_IRQ_CPU_A 0x00000004 /* disable IRQ for CPU A */ +#define PCI_DISABLE_IRQ_CPU_B 0x00000008 /* disable IRQ for CPU B */ + +/* Setting for the Interrupt Status register */ +#define IRQ_CPU_A 0x04 /* IRQ for CPU A */ +#define IRQ_CPU_B 0x08 /* IRQ for CPU B */ + +/* The maximum size of the S514 memory */ +#define MAX_SIZEOF_S514_MEMORY (256 * 1024) + +/* S514 control register offsets within the memory address space */ +#define S514_CTRL_REG_BYTE 0x80000 + +/* S514 adapter control bytes */ +#define S514_CPU_HALT 0x00 +#define S514_CPU_START 0x01 + +/* The maximum number of S514 adapters supported */ +#define MAX_S514_CARDS 20 + +#define PCI_CARD_TYPE 0x2E +#define S514_DUAL_CPU 0x12 +#define S514_SINGLE_CPU 0x11 + +#endif /* _SDLAPCI_H */ + -- cgit v1.2.3