From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- include/asm-i386/8253pit.h | 12 + include/asm-i386/a.out.h | 26 + include/asm-i386/acpi.h | 190 +++++ include/asm-i386/agp.h | 24 + include/asm-i386/apic.h | 126 +++ include/asm-i386/apicdef.h | 377 +++++++++ include/asm-i386/arch_hooks.h | 27 + include/asm-i386/atomic.h | 236 ++++++ include/asm-i386/bitops.h | 462 +++++++++++ include/asm-i386/boot.h | 15 + include/asm-i386/bug.h | 25 + include/asm-i386/bugs.h | 213 +++++ include/asm-i386/byteorder.h | 59 ++ include/asm-i386/cache.h | 15 + include/asm-i386/cacheflush.h | 34 + include/asm-i386/checksum.h | 192 +++++ include/asm-i386/cpu.h | 19 + include/asm-i386/cpufeature.h | 129 +++ include/asm-i386/cputime.h | 6 + include/asm-i386/current.h | 15 + include/asm-i386/debugreg.h | 64 ++ include/asm-i386/delay.h | 26 + include/asm-i386/desc.h | 144 ++++ include/asm-i386/div64.h | 48 ++ include/asm-i386/dma-mapping.h | 177 +++++ include/asm-i386/dma.h | 298 +++++++ include/asm-i386/e820.h | 40 + include/asm-i386/elf.h | 193 +++++ include/asm-i386/errno.h | 6 + include/asm-i386/fcntl.h | 88 ++ include/asm-i386/fixmap.h | 158 ++++ include/asm-i386/floppy.h | 319 ++++++++ include/asm-i386/genapic.h | 115 +++ include/asm-i386/hardirq.h | 24 + include/asm-i386/hdreg.h | 1 + include/asm-i386/highmem.h | 79 ++ include/asm-i386/hpet.h | 113 +++ include/asm-i386/hw_irq.h | 79 ++ include/asm-i386/i387.h | 115 +++ include/asm-i386/i8259.h | 17 + include/asm-i386/ide.h | 69 ++ include/asm-i386/io.h | 381 +++++++++ include/asm-i386/io_apic.h | 213 +++++ include/asm-i386/ioctl.h | 85 ++ include/asm-i386/ioctls.h | 83 ++ include/asm-i386/ipc.h | 1 + include/asm-i386/ipcbuf.h | 29 + include/asm-i386/irq.h | 41 + include/asm-i386/ist.h | 32 + include/asm-i386/kdebug.h | 50 ++ include/asm-i386/kmap_types.h | 31 + include/asm-i386/kprobes.h | 69 ++ include/asm-i386/ldt.h | 32 + include/asm-i386/linkage.h | 17 + include/asm-i386/local.h | 70 ++ include/asm-i386/mach-bigsmp/mach_apic.h | 167 ++++ include/asm-i386/mach-bigsmp/mach_apicdef.h | 13 + include/asm-i386/mach-bigsmp/mach_ipi.h | 25 + include/asm-i386/mach-bigsmp/mach_mpspec.h | 8 + include/asm-i386/mach-default/apm.h | 75 ++ include/asm-i386/mach-default/bios_ebda.h | 15 + include/asm-i386/mach-default/do_timer.h | 85 ++ include/asm-i386/mach-default/entry_arch.h | 34 + include/asm-i386/mach-default/io_ports.h | 30 + include/asm-i386/mach-default/irq_vectors.h | 96 +++ include/asm-i386/mach-default/irq_vectors_limits.h | 21 + include/asm-i386/mach-default/mach_apic.h | 133 ++++ include/asm-i386/mach-default/mach_apicdef.h | 13 + include/asm-i386/mach-default/mach_ipi.h | 30 + include/asm-i386/mach-default/mach_mpparse.h | 28 + include/asm-i386/mach-default/mach_mpspec.h | 8 + include/asm-i386/mach-default/mach_reboot.h | 30 + include/asm-i386/mach-default/mach_time.h | 122 +++ include/asm-i386/mach-default/mach_timer.h | 48 ++ include/asm-i386/mach-default/mach_traps.h | 41 + include/asm-i386/mach-default/mach_wakecpu.h | 41 + include/asm-i386/mach-default/pci-functions.h | 19 + include/asm-i386/mach-default/setup_arch_post.h | 40 + include/asm-i386/mach-default/setup_arch_pre.h | 5 + include/asm-i386/mach-default/smpboot_hooks.h | 44 + include/asm-i386/mach-es7000/mach_apic.h | 207 +++++ include/asm-i386/mach-es7000/mach_apicdef.h | 13 + include/asm-i386/mach-es7000/mach_ipi.h | 24 + include/asm-i386/mach-es7000/mach_mpparse.h | 41 + include/asm-i386/mach-es7000/mach_mpspec.h | 8 + include/asm-i386/mach-es7000/mach_wakecpu.h | 58 ++ include/asm-i386/mach-generic/irq_vectors_limits.h | 14 + include/asm-i386/mach-generic/mach_apic.h | 32 + include/asm-i386/mach-generic/mach_apicdef.h | 11 + include/asm-i386/mach-generic/mach_ipi.h | 10 + include/asm-i386/mach-generic/mach_mpparse.h | 12 + include/asm-i386/mach-generic/mach_mpspec.h | 10 + include/asm-i386/mach-numaq/mach_apic.h | 151 ++++ include/asm-i386/mach-numaq/mach_apicdef.h | 14 + include/asm-i386/mach-numaq/mach_ipi.h | 25 + include/asm-i386/mach-numaq/mach_mpparse.h | 29 + include/asm-i386/mach-numaq/mach_mpspec.h | 8 + include/asm-i386/mach-numaq/mach_wakecpu.h | 43 + include/asm-i386/mach-summit/irq_vectors_limits.h | 14 + include/asm-i386/mach-summit/mach_apic.h | 189 +++++ include/asm-i386/mach-summit/mach_apicdef.h | 13 + include/asm-i386/mach-summit/mach_ipi.h | 25 + include/asm-i386/mach-summit/mach_mpparse.h | 121 +++ include/asm-i386/mach-summit/mach_mpspec.h | 9 + include/asm-i386/mach-visws/cobalt.h | 125 +++ include/asm-i386/mach-visws/do_timer.h | 52 ++ include/asm-i386/mach-visws/entry_arch.h | 23 + include/asm-i386/mach-visws/irq_vectors.h | 62 ++ include/asm-i386/mach-visws/lithium.h | 53 ++ include/asm-i386/mach-visws/mach_apic.h | 100 +++ include/asm-i386/mach-visws/mach_apicdef.h | 12 + include/asm-i386/mach-visws/piix4.h | 107 +++ include/asm-i386/mach-visws/setup_arch_post.h | 49 ++ include/asm-i386/mach-visws/setup_arch_pre.h | 5 + include/asm-i386/mach-visws/smpboot_hooks.h | 24 + include/asm-i386/mach-voyager/do_timer.h | 25 + include/asm-i386/mach-voyager/entry_arch.h | 26 + include/asm-i386/mach-voyager/irq_vectors.h | 79 ++ include/asm-i386/mach-voyager/setup_arch_post.h | 73 ++ include/asm-i386/mach-voyager/setup_arch_pre.h | 10 + include/asm-i386/math_emu.h | 35 + include/asm-i386/mc146818rtc.h | 94 +++ include/asm-i386/mca.h | 43 + include/asm-i386/mca_dma.h | 202 +++++ include/asm-i386/mman.h | 43 + include/asm-i386/mmu.h | 17 + include/asm-i386/mmu_context.h | 72 ++ include/asm-i386/mmx.h | 14 + include/asm-i386/mmzone.h | 147 ++++ include/asm-i386/module.h | 75 ++ include/asm-i386/mpspec.h | 83 ++ include/asm-i386/mpspec_def.h | 188 +++++ include/asm-i386/msgbuf.h | 31 + include/asm-i386/msi.h | 22 + include/asm-i386/msr.h | 272 +++++++ include/asm-i386/mtrr.h | 107 +++ include/asm-i386/namei.h | 17 + include/asm-i386/nmi.h | 28 + include/asm-i386/node.h | 29 + include/asm-i386/numaq.h | 164 ++++ include/asm-i386/numnodes.h | 18 + include/asm-i386/page.h | 153 ++++ include/asm-i386/param.h | 23 + include/asm-i386/parport.h | 18 + include/asm-i386/pci-direct.h | 1 + include/asm-i386/pci.h | 110 +++ include/asm-i386/percpu.h | 6 + include/asm-i386/pgalloc.h | 50 ++ include/asm-i386/pgtable-2level-defs.h | 18 + include/asm-i386/pgtable-2level.h | 69 ++ include/asm-i386/pgtable-3level-defs.h | 22 + include/asm-i386/pgtable-3level.h | 160 ++++ include/asm-i386/pgtable.h | 422 ++++++++++ include/asm-i386/poll.h | 26 + include/asm-i386/posix_types.h | 82 ++ include/asm-i386/processor.h | 682 ++++++++++++++++ include/asm-i386/ptrace.h | 69 ++ include/asm-i386/resource.h | 6 + include/asm-i386/rtc.h | 10 + include/asm-i386/rwlock.h | 71 ++ include/asm-i386/rwsem.h | 288 +++++++ include/asm-i386/scatterlist.h | 21 + include/asm-i386/seccomp.h | 16 + include/asm-i386/sections.h | 7 + include/asm-i386/segment.h | 101 +++ include/asm-i386/semaphore.h | 194 +++++ include/asm-i386/sembuf.h | 25 + include/asm-i386/serial.h | 130 +++ include/asm-i386/setup.h | 66 ++ include/asm-i386/shmbuf.h | 42 + include/asm-i386/shmparam.h | 6 + include/asm-i386/sigcontext.h | 85 ++ include/asm-i386/siginfo.h | 6 + include/asm-i386/signal.h | 237 ++++++ include/asm-i386/smp.h | 90 +++ include/asm-i386/socket.h | 50 ++ include/asm-i386/sockios.h | 12 + include/asm-i386/spinlock.h | 250 ++++++ include/asm-i386/srat.h | 37 + include/asm-i386/stat.h | 78 ++ include/asm-i386/statfs.h | 6 + include/asm-i386/string.h | 449 +++++++++++ include/asm-i386/suspend.h | 66 ++ include/asm-i386/system.h | 473 +++++++++++ include/asm-i386/termbits.h | 173 ++++ include/asm-i386/termios.h | 107 +++ include/asm-i386/thread_info.h | 174 ++++ include/asm-i386/timer.h | 64 ++ include/asm-i386/timex.h | 52 ++ include/asm-i386/tlb.h | 20 + include/asm-i386/tlbflush.h | 147 ++++ include/asm-i386/topology.h | 108 +++ include/asm-i386/types.h | 72 ++ include/asm-i386/uaccess.h | 539 +++++++++++++ include/asm-i386/ucontext.h | 12 + include/asm-i386/unaligned.h | 37 + include/asm-i386/unistd.h | 466 +++++++++++ include/asm-i386/user.h | 121 +++ include/asm-i386/vga.h | 20 + include/asm-i386/vic.h | 61 ++ include/asm-i386/vm86.h | 208 +++++ include/asm-i386/voyager.h | 521 ++++++++++++ include/asm-i386/xor.h | 883 +++++++++++++++++++++ 203 files changed, 18805 insertions(+) create mode 100644 include/asm-i386/8253pit.h create mode 100644 include/asm-i386/a.out.h create mode 100644 include/asm-i386/acpi.h create mode 100644 include/asm-i386/agp.h create mode 100644 include/asm-i386/apic.h create mode 100644 include/asm-i386/apicdef.h create mode 100644 include/asm-i386/arch_hooks.h create mode 100644 include/asm-i386/atomic.h create mode 100644 include/asm-i386/bitops.h create mode 100644 include/asm-i386/boot.h create mode 100644 include/asm-i386/bug.h create mode 100644 include/asm-i386/bugs.h create mode 100644 include/asm-i386/byteorder.h create mode 100644 include/asm-i386/cache.h create mode 100644 include/asm-i386/cacheflush.h create mode 100644 include/asm-i386/checksum.h create mode 100644 include/asm-i386/cpu.h create mode 100644 include/asm-i386/cpufeature.h create mode 100644 include/asm-i386/cputime.h create mode 100644 include/asm-i386/current.h create mode 100644 include/asm-i386/debugreg.h create mode 100644 include/asm-i386/delay.h create mode 100644 include/asm-i386/desc.h create mode 100644 include/asm-i386/div64.h create mode 100644 include/asm-i386/dma-mapping.h create mode 100644 include/asm-i386/dma.h create mode 100644 include/asm-i386/e820.h create mode 100644 include/asm-i386/elf.h create mode 100644 include/asm-i386/errno.h create mode 100644 include/asm-i386/fcntl.h create mode 100644 include/asm-i386/fixmap.h create mode 100644 include/asm-i386/floppy.h create mode 100644 include/asm-i386/genapic.h create mode 100644 include/asm-i386/hardirq.h create mode 100644 include/asm-i386/hdreg.h create mode 100644 include/asm-i386/highmem.h create mode 100644 include/asm-i386/hpet.h create mode 100644 include/asm-i386/hw_irq.h create mode 100644 include/asm-i386/i387.h create mode 100644 include/asm-i386/i8259.h create mode 100644 include/asm-i386/ide.h create mode 100644 include/asm-i386/io.h create mode 100644 include/asm-i386/io_apic.h create mode 100644 include/asm-i386/ioctl.h create mode 100644 include/asm-i386/ioctls.h create mode 100644 include/asm-i386/ipc.h create mode 100644 include/asm-i386/ipcbuf.h create mode 100644 include/asm-i386/irq.h create mode 100644 include/asm-i386/ist.h create mode 100644 include/asm-i386/kdebug.h create mode 100644 include/asm-i386/kmap_types.h create mode 100644 include/asm-i386/kprobes.h create mode 100644 include/asm-i386/ldt.h create mode 100644 include/asm-i386/linkage.h create mode 100644 include/asm-i386/local.h create mode 100644 include/asm-i386/mach-bigsmp/mach_apic.h create mode 100644 include/asm-i386/mach-bigsmp/mach_apicdef.h create mode 100644 include/asm-i386/mach-bigsmp/mach_ipi.h create mode 100644 include/asm-i386/mach-bigsmp/mach_mpspec.h create mode 100644 include/asm-i386/mach-default/apm.h create mode 100644 include/asm-i386/mach-default/bios_ebda.h create mode 100644 include/asm-i386/mach-default/do_timer.h create mode 100644 include/asm-i386/mach-default/entry_arch.h create mode 100644 include/asm-i386/mach-default/io_ports.h create mode 100644 include/asm-i386/mach-default/irq_vectors.h create mode 100644 include/asm-i386/mach-default/irq_vectors_limits.h create mode 100644 include/asm-i386/mach-default/mach_apic.h create mode 100644 include/asm-i386/mach-default/mach_apicdef.h create mode 100644 include/asm-i386/mach-default/mach_ipi.h create mode 100644 include/asm-i386/mach-default/mach_mpparse.h create mode 100644 include/asm-i386/mach-default/mach_mpspec.h create mode 100644 include/asm-i386/mach-default/mach_reboot.h create mode 100644 include/asm-i386/mach-default/mach_time.h create mode 100644 include/asm-i386/mach-default/mach_timer.h create mode 100644 include/asm-i386/mach-default/mach_traps.h create mode 100644 include/asm-i386/mach-default/mach_wakecpu.h create mode 100644 include/asm-i386/mach-default/pci-functions.h create mode 100644 include/asm-i386/mach-default/setup_arch_post.h create mode 100644 include/asm-i386/mach-default/setup_arch_pre.h create mode 100644 include/asm-i386/mach-default/smpboot_hooks.h create mode 100644 include/asm-i386/mach-es7000/mach_apic.h create mode 100644 include/asm-i386/mach-es7000/mach_apicdef.h create mode 100644 include/asm-i386/mach-es7000/mach_ipi.h create mode 100644 include/asm-i386/mach-es7000/mach_mpparse.h create mode 100644 include/asm-i386/mach-es7000/mach_mpspec.h create mode 100644 include/asm-i386/mach-es7000/mach_wakecpu.h create mode 100644 include/asm-i386/mach-generic/irq_vectors_limits.h create mode 100644 include/asm-i386/mach-generic/mach_apic.h create mode 100644 include/asm-i386/mach-generic/mach_apicdef.h create mode 100644 include/asm-i386/mach-generic/mach_ipi.h create mode 100644 include/asm-i386/mach-generic/mach_mpparse.h create mode 100644 include/asm-i386/mach-generic/mach_mpspec.h create mode 100644 include/asm-i386/mach-numaq/mach_apic.h create mode 100644 include/asm-i386/mach-numaq/mach_apicdef.h create mode 100644 include/asm-i386/mach-numaq/mach_ipi.h create mode 100644 include/asm-i386/mach-numaq/mach_mpparse.h create mode 100644 include/asm-i386/mach-numaq/mach_mpspec.h create mode 100644 include/asm-i386/mach-numaq/mach_wakecpu.h create mode 100644 include/asm-i386/mach-summit/irq_vectors_limits.h create mode 100644 include/asm-i386/mach-summit/mach_apic.h create mode 100644 include/asm-i386/mach-summit/mach_apicdef.h create mode 100644 include/asm-i386/mach-summit/mach_ipi.h create mode 100644 include/asm-i386/mach-summit/mach_mpparse.h create mode 100644 include/asm-i386/mach-summit/mach_mpspec.h create mode 100644 include/asm-i386/mach-visws/cobalt.h create mode 100644 include/asm-i386/mach-visws/do_timer.h create mode 100644 include/asm-i386/mach-visws/entry_arch.h create mode 100644 include/asm-i386/mach-visws/irq_vectors.h create mode 100644 include/asm-i386/mach-visws/lithium.h create mode 100644 include/asm-i386/mach-visws/mach_apic.h create mode 100644 include/asm-i386/mach-visws/mach_apicdef.h create mode 100644 include/asm-i386/mach-visws/piix4.h create mode 100644 include/asm-i386/mach-visws/setup_arch_post.h create mode 100644 include/asm-i386/mach-visws/setup_arch_pre.h create mode 100644 include/asm-i386/mach-visws/smpboot_hooks.h create mode 100644 include/asm-i386/mach-voyager/do_timer.h create mode 100644 include/asm-i386/mach-voyager/entry_arch.h create mode 100644 include/asm-i386/mach-voyager/irq_vectors.h create mode 100644 include/asm-i386/mach-voyager/setup_arch_post.h create mode 100644 include/asm-i386/mach-voyager/setup_arch_pre.h create mode 100644 include/asm-i386/math_emu.h create mode 100644 include/asm-i386/mc146818rtc.h create mode 100644 include/asm-i386/mca.h create mode 100644 include/asm-i386/mca_dma.h create mode 100644 include/asm-i386/mman.h create mode 100644 include/asm-i386/mmu.h create mode 100644 include/asm-i386/mmu_context.h create mode 100644 include/asm-i386/mmx.h create mode 100644 include/asm-i386/mmzone.h create mode 100644 include/asm-i386/module.h create mode 100644 include/asm-i386/mpspec.h create mode 100644 include/asm-i386/mpspec_def.h create mode 100644 include/asm-i386/msgbuf.h create mode 100644 include/asm-i386/msi.h create mode 100644 include/asm-i386/msr.h create mode 100644 include/asm-i386/mtrr.h create mode 100644 include/asm-i386/namei.h create mode 100644 include/asm-i386/nmi.h create mode 100644 include/asm-i386/node.h create mode 100644 include/asm-i386/numaq.h create mode 100644 include/asm-i386/numnodes.h create mode 100644 include/asm-i386/page.h create mode 100644 include/asm-i386/param.h create mode 100644 include/asm-i386/parport.h create mode 100644 include/asm-i386/pci-direct.h create mode 100644 include/asm-i386/pci.h create mode 100644 include/asm-i386/percpu.h create mode 100644 include/asm-i386/pgalloc.h create mode 100644 include/asm-i386/pgtable-2level-defs.h create mode 100644 include/asm-i386/pgtable-2level.h create mode 100644 include/asm-i386/pgtable-3level-defs.h create mode 100644 include/asm-i386/pgtable-3level.h create mode 100644 include/asm-i386/pgtable.h create mode 100644 include/asm-i386/poll.h create mode 100644 include/asm-i386/posix_types.h create mode 100644 include/asm-i386/processor.h create mode 100644 include/asm-i386/ptrace.h create mode 100644 include/asm-i386/resource.h create mode 100644 include/asm-i386/rtc.h create mode 100644 include/asm-i386/rwlock.h create mode 100644 include/asm-i386/rwsem.h create mode 100644 include/asm-i386/scatterlist.h create mode 100644 include/asm-i386/seccomp.h create mode 100644 include/asm-i386/sections.h create mode 100644 include/asm-i386/segment.h create mode 100644 include/asm-i386/semaphore.h create mode 100644 include/asm-i386/sembuf.h create mode 100644 include/asm-i386/serial.h create mode 100644 include/asm-i386/setup.h create mode 100644 include/asm-i386/shmbuf.h create mode 100644 include/asm-i386/shmparam.h create mode 100644 include/asm-i386/sigcontext.h create mode 100644 include/asm-i386/siginfo.h create mode 100644 include/asm-i386/signal.h create mode 100644 include/asm-i386/smp.h create mode 100644 include/asm-i386/socket.h create mode 100644 include/asm-i386/sockios.h create mode 100644 include/asm-i386/spinlock.h create mode 100644 include/asm-i386/srat.h create mode 100644 include/asm-i386/stat.h create mode 100644 include/asm-i386/statfs.h create mode 100644 include/asm-i386/string.h create mode 100644 include/asm-i386/suspend.h create mode 100644 include/asm-i386/system.h create mode 100644 include/asm-i386/termbits.h create mode 100644 include/asm-i386/termios.h create mode 100644 include/asm-i386/thread_info.h create mode 100644 include/asm-i386/timer.h create mode 100644 include/asm-i386/timex.h create mode 100644 include/asm-i386/tlb.h create mode 100644 include/asm-i386/tlbflush.h create mode 100644 include/asm-i386/topology.h create mode 100644 include/asm-i386/types.h create mode 100644 include/asm-i386/uaccess.h create mode 100644 include/asm-i386/ucontext.h create mode 100644 include/asm-i386/unaligned.h create mode 100644 include/asm-i386/unistd.h create mode 100644 include/asm-i386/user.h create mode 100644 include/asm-i386/vga.h create mode 100644 include/asm-i386/vic.h create mode 100644 include/asm-i386/vm86.h create mode 100644 include/asm-i386/voyager.h create mode 100644 include/asm-i386/xor.h (limited to 'include/asm-i386') diff --git a/include/asm-i386/8253pit.h b/include/asm-i386/8253pit.h new file mode 100644 index 00000000000..96c7c3592da --- /dev/null +++ b/include/asm-i386/8253pit.h @@ -0,0 +1,12 @@ +/* + * 8253/8254 Programmable Interval Timer + */ + +#ifndef _8253PIT_H +#define _8253PIT_H + +#include + +#define PIT_TICK_RATE CLOCK_TICK_RATE + +#endif diff --git a/include/asm-i386/a.out.h b/include/asm-i386/a.out.h new file mode 100644 index 00000000000..ab17bb8e546 --- /dev/null +++ b/include/asm-i386/a.out.h @@ -0,0 +1,26 @@ +#ifndef __I386_A_OUT_H__ +#define __I386_A_OUT_H__ + +struct exec +{ + unsigned long a_info; /* Use macros N_MAGIC, etc for access */ + unsigned a_text; /* length of text, in bytes */ + unsigned a_data; /* length of data, in bytes */ + unsigned a_bss; /* length of uninitialized data area for file, in bytes */ + unsigned a_syms; /* length of symbol table data in file, in bytes */ + unsigned a_entry; /* start address */ + unsigned a_trsize; /* length of relocation info for text, in bytes */ + unsigned a_drsize; /* length of relocation info for data, in bytes */ +}; + +#define N_TRSIZE(a) ((a).a_trsize) +#define N_DRSIZE(a) ((a).a_drsize) +#define N_SYMSIZE(a) ((a).a_syms) + +#ifdef __KERNEL__ + +#define STACK_TOP TASK_SIZE + +#endif + +#endif /* __A_OUT_GNU_H__ */ diff --git a/include/asm-i386/acpi.h b/include/asm-i386/acpi.h new file mode 100644 index 00000000000..c976c1dadec --- /dev/null +++ b/include/asm-i386/acpi.h @@ -0,0 +1,190 @@ +/* + * asm-i386/acpi.h + * + * Copyright (C) 2001 Paul Diefenbaugh + * Copyright (C) 2001 Patrick Mochel + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#ifndef _ASM_ACPI_H +#define _ASM_ACPI_H + +#ifdef __KERNEL__ + +#include /* defines cmpxchg */ + +#define COMPILER_DEPENDENT_INT64 long long +#define COMPILER_DEPENDENT_UINT64 unsigned long long + +/* + * Calling conventions: + * + * ACPI_SYSTEM_XFACE - Interfaces to host OS (handlers, threads) + * ACPI_EXTERNAL_XFACE - External ACPI interfaces + * ACPI_INTERNAL_XFACE - Internal ACPI interfaces + * ACPI_INTERNAL_VAR_XFACE - Internal variable-parameter list interfaces + */ +#define ACPI_SYSTEM_XFACE +#define ACPI_EXTERNAL_XFACE +#define ACPI_INTERNAL_XFACE +#define ACPI_INTERNAL_VAR_XFACE + +/* Asm macros */ + +#define ACPI_ASM_MACROS +#define BREAKPOINT3 +#define ACPI_DISABLE_IRQS() local_irq_disable() +#define ACPI_ENABLE_IRQS() local_irq_enable() +#define ACPI_FLUSH_CPU_CACHE() wbinvd() + + +static inline int +__acpi_acquire_global_lock (unsigned int *lock) +{ + unsigned int old, new, val; + do { + old = *lock; + new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1)); + val = cmpxchg(lock, old, new); + } while (unlikely (val != old)); + return (new < 3) ? -1 : 0; +} + +static inline int +__acpi_release_global_lock (unsigned int *lock) +{ + unsigned int old, new, val; + do { + old = *lock; + new = old & ~0x3; + val = cmpxchg(lock, old, new); + } while (unlikely (val != old)); + return old & 0x1; +} + +#define ACPI_ACQUIRE_GLOBAL_LOCK(GLptr, Acq) \ + ((Acq) = __acpi_acquire_global_lock((unsigned int *) GLptr)) + +#define ACPI_RELEASE_GLOBAL_LOCK(GLptr, Acq) \ + ((Acq) = __acpi_release_global_lock((unsigned int *) GLptr)) + +/* + * Math helper asm macros + */ +#define ACPI_DIV_64_BY_32(n_hi, n_lo, d32, q32, r32) \ + asm("divl %2;" \ + :"=a"(q32), "=d"(r32) \ + :"r"(d32), \ + "0"(n_lo), "1"(n_hi)) + + +#define ACPI_SHIFT_RIGHT_64(n_hi, n_lo) \ + asm("shrl $1,%2;" \ + "rcrl $1,%3;" \ + :"=r"(n_hi), "=r"(n_lo) \ + :"0"(n_hi), "1"(n_lo)) + +/* + * Refer Intel ACPI _PDC support document for bit definitions + */ +#define ACPI_PDC_EST_CAPABILITY_SMP 0xa +#define ACPI_PDC_EST_CAPABILITY_MSR 0x1 + +#ifdef CONFIG_ACPI_BOOT +extern int acpi_lapic; +extern int acpi_ioapic; +extern int acpi_noirq; +extern int acpi_strict; +extern int acpi_disabled; +extern int acpi_ht; +extern int acpi_pci_disabled; +static inline void disable_acpi(void) +{ + acpi_disabled = 1; + acpi_ht = 0; + acpi_pci_disabled = 1; + acpi_noirq = 1; +} + +/* Fixmap pages to reserve for ACPI boot-time tables (see fixmap.h) */ +#define FIX_ACPI_PAGES 4 + +extern int acpi_gsi_to_irq(u32 gsi, unsigned int *irq); + +#ifdef CONFIG_X86_IO_APIC +extern int skip_ioapic_setup; +extern int acpi_skip_timer_override; + +extern void check_acpi_pci(void); + +static inline void disable_ioapic_setup(void) +{ + skip_ioapic_setup = 1; +} + +static inline int ioapic_setup_disabled(void) +{ + return skip_ioapic_setup; +} + +#else +static inline void disable_ioapic_setup(void) { } +static inline void check_acpi_pci(void) { } + +#endif + +#else /* CONFIG_ACPI_BOOT */ +# define acpi_lapic 0 +# define acpi_ioapic 0 + +#endif + +#ifdef CONFIG_ACPI_PCI +static inline void acpi_noirq_set(void) { acpi_noirq = 1; } +static inline void acpi_disable_pci(void) +{ + acpi_pci_disabled = 1; + acpi_noirq_set(); +} +extern int acpi_irq_balance_set(char *str); +#else +static inline void acpi_noirq_set(void) { } +static inline void acpi_disable_pci(void) { } +static inline int acpi_irq_balance_set(char *str) { return 0; } +#endif + +#ifdef CONFIG_ACPI_SLEEP + +/* routines for saving/restoring kernel state */ +extern int acpi_save_state_mem(void); +extern void acpi_restore_state_mem(void); + +extern unsigned long acpi_wakeup_address; + +/* early initialization routine */ +extern void acpi_reserve_bootmem(void); + +#endif /*CONFIG_ACPI_SLEEP*/ + +extern u8 x86_acpiid_to_apicid[]; + +#endif /*__KERNEL__*/ + +#endif /*_ASM_ACPI_H*/ diff --git a/include/asm-i386/agp.h b/include/asm-i386/agp.h new file mode 100644 index 00000000000..a917ff50354 --- /dev/null +++ b/include/asm-i386/agp.h @@ -0,0 +1,24 @@ +#ifndef AGP_H +#define AGP_H 1 + +#include +#include + +/* + * Functions to keep the agpgart mappings coherent with the MMU. + * The GART gives the CPU a physical alias of pages in memory. The alias region is + * mapped uncacheable. Make sure there are no conflicting mappings + * with different cachability attributes for the same page. This avoids + * data corruption on some CPUs. + */ + +int map_page_into_agp(struct page *page); +int unmap_page_from_agp(struct page *page); +#define flush_agp_mappings() global_flush_tlb() + +/* Could use CLFLUSH here if the cpu supports it. But then it would + need to be called for each cacheline of the whole page so it may not be + worth it. Would need a page for it. */ +#define flush_agp_cache() asm volatile("wbinvd":::"memory") + +#endif diff --git a/include/asm-i386/apic.h b/include/asm-i386/apic.h new file mode 100644 index 00000000000..e1de67483f3 --- /dev/null +++ b/include/asm-i386/apic.h @@ -0,0 +1,126 @@ +#ifndef __ASM_APIC_H +#define __ASM_APIC_H + +#include +#include +#include +#include +#include + +#define Dprintk(x...) + +/* + * Debugging macros + */ +#define APIC_QUIET 0 +#define APIC_VERBOSE 1 +#define APIC_DEBUG 2 + +extern int apic_verbosity; + +/* + * Define the default level of output to be very little + * This can be turned up by using apic=verbose for more + * information and apic=debug for _lots_ of information. + * apic_verbosity is defined in apic.c + */ +#define apic_printk(v, s, a...) do { \ + if ((v) <= apic_verbosity) \ + printk(s, ##a); \ + } while (0) + + +#ifdef CONFIG_X86_LOCAL_APIC + +/* + * Basic functions accessing APICs. + */ + +static __inline void apic_write(unsigned long reg, unsigned long v) +{ + *((volatile unsigned long *)(APIC_BASE+reg)) = v; +} + +static __inline void apic_write_atomic(unsigned long reg, unsigned long v) +{ + xchg((volatile unsigned long *)(APIC_BASE+reg), v); +} + +static __inline unsigned long apic_read(unsigned long reg) +{ + return *((volatile unsigned long *)(APIC_BASE+reg)); +} + +static __inline__ void apic_wait_icr_idle(void) +{ + while ( apic_read( APIC_ICR ) & APIC_ICR_BUSY ) + cpu_relax(); +} + +int get_physical_broadcast(void); + +#ifdef CONFIG_X86_GOOD_APIC +# define FORCE_READ_AROUND_WRITE 0 +# define apic_read_around(x) +# define apic_write_around(x,y) apic_write((x),(y)) +#else +# define FORCE_READ_AROUND_WRITE 1 +# define apic_read_around(x) apic_read(x) +# define apic_write_around(x,y) apic_write_atomic((x),(y)) +#endif + +static inline void ack_APIC_irq(void) +{ + /* + * ack_APIC_irq() actually gets compiled as a single instruction: + * - a single rmw on Pentium/82489DX + * - a single write on P6+ cores (CONFIG_X86_GOOD_APIC) + * ... yummie. + */ + + /* Docs say use 0 for future compatibility */ + apic_write_around(APIC_EOI, 0); +} + +extern void (*wait_timer_tick)(void); + +extern int get_maxlvt(void); +extern void clear_local_APIC(void); +extern void connect_bsp_APIC (void); +extern void disconnect_bsp_APIC (void); +extern void disable_local_APIC (void); +extern void lapic_shutdown (void); +extern int verify_local_APIC (void); +extern void cache_APIC_registers (void); +extern void sync_Arb_IDs (void); +extern void init_bsp_APIC (void); +extern void setup_local_APIC (void); +extern void init_apic_mappings (void); +extern void smp_local_timer_interrupt (struct pt_regs * regs); +extern void setup_boot_APIC_clock (void); +extern void setup_secondary_APIC_clock (void); +extern void setup_apic_nmi_watchdog (void); +extern int reserve_lapic_nmi(void); +extern void release_lapic_nmi(void); +extern void disable_timer_nmi_watchdog(void); +extern void enable_timer_nmi_watchdog(void); +extern void nmi_watchdog_tick (struct pt_regs * regs); +extern int APIC_init_uniprocessor (void); +extern void disable_APIC_timer(void); +extern void enable_APIC_timer(void); + +extern int check_nmi_watchdog (void); +extern void enable_NMI_through_LVT0 (void * dummy); + +extern unsigned int nmi_watchdog; +#define NMI_NONE 0 +#define NMI_IO_APIC 1 +#define NMI_LOCAL_APIC 2 +#define NMI_INVALID 3 + +#else /* !CONFIG_X86_LOCAL_APIC */ +static inline void lapic_shutdown(void) { } + +#endif /* !CONFIG_X86_LOCAL_APIC */ + +#endif /* __ASM_APIC_H */ diff --git a/include/asm-i386/apicdef.h b/include/asm-i386/apicdef.h new file mode 100644 index 00000000000..c689554ad5b --- /dev/null +++ b/include/asm-i386/apicdef.h @@ -0,0 +1,377 @@ +#ifndef __ASM_APICDEF_H +#define __ASM_APICDEF_H + +/* + * Constants for various Intel APICs. (local APIC, IOAPIC, etc.) + * + * Alan Cox , 1995. + * Ingo Molnar , 1999, 2000 + */ + +#define APIC_DEFAULT_PHYS_BASE 0xfee00000 + +#define APIC_ID 0x20 +#define APIC_LVR 0x30 +#define APIC_LVR_MASK 0xFF00FF +#define GET_APIC_VERSION(x) ((x)&0xFF) +#define GET_APIC_MAXLVT(x) (((x)>>16)&0xFF) +#define APIC_INTEGRATED(x) ((x)&0xF0) +#define APIC_TASKPRI 0x80 +#define APIC_TPRI_MASK 0xFF +#define APIC_ARBPRI 0x90 +#define APIC_ARBPRI_MASK 0xFF +#define APIC_PROCPRI 0xA0 +#define APIC_EOI 0xB0 +#define APIC_EIO_ACK 0x0 /* Write this to the EOI register */ +#define APIC_RRR 0xC0 +#define APIC_LDR 0xD0 +#define APIC_LDR_MASK (0xFF<<24) +#define GET_APIC_LOGICAL_ID(x) (((x)>>24)&0xFF) +#define SET_APIC_LOGICAL_ID(x) (((x)<<24)) +#define APIC_ALL_CPUS 0xFF +#define APIC_DFR 0xE0 +#define APIC_DFR_CLUSTER 0x0FFFFFFFul +#define APIC_DFR_FLAT 0xFFFFFFFFul +#define APIC_SPIV 0xF0 +#define APIC_SPIV_FOCUS_DISABLED (1<<9) +#define APIC_SPIV_APIC_ENABLED (1<<8) +#define APIC_ISR 0x100 +#define APIC_TMR 0x180 +#define APIC_IRR 0x200 +#define APIC_ESR 0x280 +#define APIC_ESR_SEND_CS 0x00001 +#define APIC_ESR_RECV_CS 0x00002 +#define APIC_ESR_SEND_ACC 0x00004 +#define APIC_ESR_RECV_ACC 0x00008 +#define APIC_ESR_SENDILL 0x00020 +#define APIC_ESR_RECVILL 0x00040 +#define APIC_ESR_ILLREGA 0x00080 +#define APIC_ICR 0x300 +#define APIC_DEST_SELF 0x40000 +#define APIC_DEST_ALLINC 0x80000 +#define APIC_DEST_ALLBUT 0xC0000 +#define APIC_ICR_RR_MASK 0x30000 +#define APIC_ICR_RR_INVALID 0x00000 +#define APIC_ICR_RR_INPROG 0x10000 +#define APIC_ICR_RR_VALID 0x20000 +#define APIC_INT_LEVELTRIG 0x08000 +#define APIC_INT_ASSERT 0x04000 +#define APIC_ICR_BUSY 0x01000 +#define APIC_DEST_LOGICAL 0x00800 +#define APIC_DM_FIXED 0x00000 +#define APIC_DM_LOWEST 0x00100 +#define APIC_DM_SMI 0x00200 +#define APIC_DM_REMRD 0x00300 +#define APIC_DM_NMI 0x00400 +#define APIC_DM_INIT 0x00500 +#define APIC_DM_STARTUP 0x00600 +#define APIC_DM_EXTINT 0x00700 +#define APIC_VECTOR_MASK 0x000FF +#define APIC_ICR2 0x310 +#define GET_APIC_DEST_FIELD(x) (((x)>>24)&0xFF) +#define SET_APIC_DEST_FIELD(x) ((x)<<24) +#define APIC_LVTT 0x320 +#define APIC_LVTTHMR 0x330 +#define APIC_LVTPC 0x340 +#define APIC_LVT0 0x350 +#define APIC_LVT_TIMER_BASE_MASK (0x3<<18) +#define GET_APIC_TIMER_BASE(x) (((x)>>18)&0x3) +#define SET_APIC_TIMER_BASE(x) (((x)<<18)) +#define APIC_TIMER_BASE_CLKIN 0x0 +#define APIC_TIMER_BASE_TMBASE 0x1 +#define APIC_TIMER_BASE_DIV 0x2 +#define APIC_LVT_TIMER_PERIODIC (1<<17) +#define APIC_LVT_MASKED (1<<16) +#define APIC_LVT_LEVEL_TRIGGER (1<<15) +#define APIC_LVT_REMOTE_IRR (1<<14) +#define APIC_INPUT_POLARITY (1<<13) +#define APIC_SEND_PENDING (1<<12) +#define GET_APIC_DELIVERY_MODE(x) (((x)>>8)&0x7) +#define SET_APIC_DELIVERY_MODE(x,y) (((x)&~0x700)|((y)<<8)) +#define APIC_MODE_FIXED 0x0 +#define APIC_MODE_NMI 0x4 +#define APIC_MODE_EXINT 0x7 +#define APIC_LVT1 0x360 +#define APIC_LVTERR 0x370 +#define APIC_TMICT 0x380 +#define APIC_TMCCT 0x390 +#define APIC_TDCR 0x3E0 +#define APIC_TDR_DIV_TMBASE (1<<2) +#define APIC_TDR_DIV_1 0xB +#define APIC_TDR_DIV_2 0x0 +#define APIC_TDR_DIV_4 0x1 +#define APIC_TDR_DIV_8 0x2 +#define APIC_TDR_DIV_16 0x3 +#define APIC_TDR_DIV_32 0x8 +#define APIC_TDR_DIV_64 0x9 +#define APIC_TDR_DIV_128 0xA + +#define APIC_BASE (fix_to_virt(FIX_APIC_BASE)) + +#ifdef CONFIG_NUMA + #define MAX_IO_APICS 32 +#else + #define MAX_IO_APICS 8 +#endif + +/* + * the local APIC register structure, memory mapped. Not terribly well + * tested, but we might eventually use this one in the future - the + * problem why we cannot use it right now is the P5 APIC, it has an + * errata which cannot take 8-bit reads and writes, only 32-bit ones ... + */ +#define u32 unsigned int + +#define lapic ((volatile struct local_apic *)APIC_BASE) + +struct local_apic { + +/*000*/ struct { u32 __reserved[4]; } __reserved_01; + +/*010*/ struct { u32 __reserved[4]; } __reserved_02; + +/*020*/ struct { /* APIC ID Register */ + u32 __reserved_1 : 24, + phys_apic_id : 4, + __reserved_2 : 4; + u32 __reserved[3]; + } id; + +/*030*/ const + struct { /* APIC Version Register */ + u32 version : 8, + __reserved_1 : 8, + max_lvt : 8, + __reserved_2 : 8; + u32 __reserved[3]; + } version; + +/*040*/ struct { u32 __reserved[4]; } __reserved_03; + +/*050*/ struct { u32 __reserved[4]; } __reserved_04; + +/*060*/ struct { u32 __reserved[4]; } __reserved_05; + +/*070*/ struct { u32 __reserved[4]; } __reserved_06; + +/*080*/ struct { /* Task Priority Register */ + u32 priority : 8, + __reserved_1 : 24; + u32 __reserved_2[3]; + } tpr; + +/*090*/ const + struct { /* Arbitration Priority Register */ + u32 priority : 8, + __reserved_1 : 24; + u32 __reserved_2[3]; + } apr; + +/*0A0*/ const + struct { /* Processor Priority Register */ + u32 priority : 8, + __reserved_1 : 24; + u32 __reserved_2[3]; + } ppr; + +/*0B0*/ struct { /* End Of Interrupt Register */ + u32 eoi; + u32 __reserved[3]; + } eoi; + +/*0C0*/ struct { u32 __reserved[4]; } __reserved_07; + +/*0D0*/ struct { /* Logical Destination Register */ + u32 __reserved_1 : 24, + logical_dest : 8; + u32 __reserved_2[3]; + } ldr; + +/*0E0*/ struct { /* Destination Format Register */ + u32 __reserved_1 : 28, + model : 4; + u32 __reserved_2[3]; + } dfr; + +/*0F0*/ struct { /* Spurious Interrupt Vector Register */ + u32 spurious_vector : 8, + apic_enabled : 1, + focus_cpu : 1, + __reserved_2 : 22; + u32 __reserved_3[3]; + } svr; + +/*100*/ struct { /* In Service Register */ +/*170*/ u32 bitfield; + u32 __reserved[3]; + } isr [8]; + +/*180*/ struct { /* Trigger Mode Register */ +/*1F0*/ u32 bitfield; + u32 __reserved[3]; + } tmr [8]; + +/*200*/ struct { /* Interrupt Request Register */ +/*270*/ u32 bitfield; + u32 __reserved[3]; + } irr [8]; + +/*280*/ union { /* Error Status Register */ + struct { + u32 send_cs_error : 1, + receive_cs_error : 1, + send_accept_error : 1, + receive_accept_error : 1, + __reserved_1 : 1, + send_illegal_vector : 1, + receive_illegal_vector : 1, + illegal_register_address : 1, + __reserved_2 : 24; + u32 __reserved_3[3]; + } error_bits; + struct { + u32 errors; + u32 __reserved_3[3]; + } all_errors; + } esr; + +/*290*/ struct { u32 __reserved[4]; } __reserved_08; + +/*2A0*/ struct { u32 __reserved[4]; } __reserved_09; + +/*2B0*/ struct { u32 __reserved[4]; } __reserved_10; + +/*2C0*/ struct { u32 __reserved[4]; } __reserved_11; + +/*2D0*/ struct { u32 __reserved[4]; } __reserved_12; + +/*2E0*/ struct { u32 __reserved[4]; } __reserved_13; + +/*2F0*/ struct { u32 __reserved[4]; } __reserved_14; + +/*300*/ struct { /* Interrupt Command Register 1 */ + u32 vector : 8, + delivery_mode : 3, + destination_mode : 1, + delivery_status : 1, + __reserved_1 : 1, + level : 1, + trigger : 1, + __reserved_2 : 2, + shorthand : 2, + __reserved_3 : 12; + u32 __reserved_4[3]; + } icr1; + +/*310*/ struct { /* Interrupt Command Register 2 */ + union { + u32 __reserved_1 : 24, + phys_dest : 4, + __reserved_2 : 4; + u32 __reserved_3 : 24, + logical_dest : 8; + } dest; + u32 __reserved_4[3]; + } icr2; + +/*320*/ struct { /* LVT - Timer */ + u32 vector : 8, + __reserved_1 : 4, + delivery_status : 1, + __reserved_2 : 3, + mask : 1, + timer_mode : 1, + __reserved_3 : 14; + u32 __reserved_4[3]; + } lvt_timer; + +/*330*/ struct { /* LVT - Thermal Sensor */ + u32 vector : 8, + delivery_mode : 3, + __reserved_1 : 1, + delivery_status : 1, + __reserved_2 : 3, + mask : 1, + __reserved_3 : 15; + u32 __reserved_4[3]; + } lvt_thermal; + +/*340*/ struct { /* LVT - Performance Counter */ + u32 vector : 8, + delivery_mode : 3, + __reserved_1 : 1, + delivery_status : 1, + __reserved_2 : 3, + mask : 1, + __reserved_3 : 15; + u32 __reserved_4[3]; + } lvt_pc; + +/*350*/ struct { /* LVT - LINT0 */ + u32 vector : 8, + delivery_mode : 3, + __reserved_1 : 1, + delivery_status : 1, + polarity : 1, + remote_irr : 1, + trigger : 1, + mask : 1, + __reserved_2 : 15; + u32 __reserved_3[3]; + } lvt_lint0; + +/*360*/ struct { /* LVT - LINT1 */ + u32 vector : 8, + delivery_mode : 3, + __reserved_1 : 1, + delivery_status : 1, + polarity : 1, + remote_irr : 1, + trigger : 1, + mask : 1, + __reserved_2 : 15; + u32 __reserved_3[3]; + } lvt_lint1; + +/*370*/ struct { /* LVT - Error */ + u32 vector : 8, + __reserved_1 : 4, + delivery_status : 1, + __reserved_2 : 3, + mask : 1, + __reserved_3 : 15; + u32 __reserved_4[3]; + } lvt_error; + +/*380*/ struct { /* Timer Initial Count Register */ + u32 initial_count; + u32 __reserved_2[3]; + } timer_icr; + +/*390*/ const + struct { /* Timer Current Count Register */ + u32 curr_count; + u32 __reserved_2[3]; + } timer_ccr; + +/*3A0*/ struct { u32 __reserved[4]; } __reserved_16; + +/*3B0*/ struct { u32 __reserved[4]; } __reserved_17; + +/*3C0*/ struct { u32 __reserved[4]; } __reserved_18; + +/*3D0*/ struct { u32 __reserved[4]; } __reserved_19; + +/*3E0*/ struct { /* Timer Divide Configuration Register */ + u32 divisor : 4, + __reserved_1 : 28; + u32 __reserved_2[3]; + } timer_dcr; + +/*3F0*/ struct { u32 __reserved[4]; } __reserved_20; + +} __attribute__ ((packed)); + +#undef u32 + +#endif diff --git a/include/asm-i386/arch_hooks.h b/include/asm-i386/arch_hooks.h new file mode 100644 index 00000000000..28b96a6fb9f --- /dev/null +++ b/include/asm-i386/arch_hooks.h @@ -0,0 +1,27 @@ +#ifndef _ASM_ARCH_HOOKS_H +#define _ASM_ARCH_HOOKS_H + +#include + +/* + * linux/include/asm/arch_hooks.h + * + * define the architecture specific hooks + */ + +/* these aren't arch hooks, they are generic routines + * that can be used by the hooks */ +extern void init_ISA_irqs(void); +extern void apic_intr_init(void); +extern void smp_intr_init(void); +extern irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs); + +/* these are the defined hooks */ +extern void intr_init_hook(void); +extern void pre_intr_init_hook(void); +extern void pre_setup_arch_hook(void); +extern void trap_init_hook(void); +extern void time_init_hook(void); +extern void mca_nmi_hook(void); + +#endif diff --git a/include/asm-i386/atomic.h b/include/asm-i386/atomic.h new file mode 100644 index 00000000000..509720be772 --- /dev/null +++ b/include/asm-i386/atomic.h @@ -0,0 +1,236 @@ +#ifndef __ARCH_I386_ATOMIC__ +#define __ARCH_I386_ATOMIC__ + +#include +#include +#include + +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc.. + */ + +#ifdef CONFIG_SMP +#define LOCK "lock ; " +#else +#define LOCK "" +#endif + +/* + * Make sure gcc doesn't try to be clever and move things around + * on us. We need to use _exactly_ the address the user gave us, + * not some alias that contains the same information. + */ +typedef struct { volatile int counter; } atomic_t; + +#define ATOMIC_INIT(i) { (i) } + +/** + * atomic_read - read atomic variable + * @v: pointer of type atomic_t + * + * Atomically reads the value of @v. + */ +#define atomic_read(v) ((v)->counter) + +/** + * atomic_set - set atomic variable + * @v: pointer of type atomic_t + * @i: required value + * + * Atomically sets the value of @v to @i. + */ +#define atomic_set(v,i) (((v)->counter) = (i)) + +/** + * atomic_add - add integer to atomic variable + * @i: integer value to add + * @v: pointer of type atomic_t + * + * Atomically adds @i to @v. + */ +static __inline__ void atomic_add(int i, atomic_t *v) +{ + __asm__ __volatile__( + LOCK "addl %1,%0" + :"=m" (v->counter) + :"ir" (i), "m" (v->counter)); +} + +/** + * atomic_sub - subtract the atomic variable + * @i: integer value to subtract + * @v: pointer of type atomic_t + * + * Atomically subtracts @i from @v. + */ +static __inline__ void atomic_sub(int i, atomic_t *v) +{ + __asm__ __volatile__( + LOCK "subl %1,%0" + :"=m" (v->counter) + :"ir" (i), "m" (v->counter)); +} + +/** + * atomic_sub_and_test - subtract value from variable and test result + * @i: integer value to subtract + * @v: pointer of type atomic_t + * + * Atomically subtracts @i from @v and returns + * true if the result is zero, or false for all + * other cases. + */ +static __inline__ int atomic_sub_and_test(int i, atomic_t *v) +{ + unsigned char c; + + __asm__ __volatile__( + LOCK "subl %2,%0; sete %1" + :"=m" (v->counter), "=qm" (c) + :"ir" (i), "m" (v->counter) : "memory"); + return c; +} + +/** + * atomic_inc - increment atomic variable + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1. + */ +static __inline__ void atomic_inc(atomic_t *v) +{ + __asm__ __volatile__( + LOCK "incl %0" + :"=m" (v->counter) + :"m" (v->counter)); +} + +/** + * atomic_dec - decrement atomic variable + * @v: pointer of type atomic_t + * + * Atomically decrements @v by 1. + */ +static __inline__ void atomic_dec(atomic_t *v) +{ + __asm__ __volatile__( + LOCK "decl %0" + :"=m" (v->counter) + :"m" (v->counter)); +} + +/** + * atomic_dec_and_test - decrement and test + * @v: pointer of type atomic_t + * + * Atomically decrements @v by 1 and + * returns true if the result is 0, or false for all other + * cases. + */ +static __inline__ int atomic_dec_and_test(atomic_t *v) +{ + unsigned char c; + + __asm__ __volatile__( + LOCK "decl %0; sete %1" + :"=m" (v->counter), "=qm" (c) + :"m" (v->counter) : "memory"); + return c != 0; +} + +/** + * atomic_inc_and_test - increment and test + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +static __inline__ int atomic_inc_and_test(atomic_t *v) +{ + unsigned char c; + + __asm__ __volatile__( + LOCK "incl %0; sete %1" + :"=m" (v->counter), "=qm" (c) + :"m" (v->counter) : "memory"); + return c != 0; +} + +/** + * atomic_add_negative - add and test if negative + * @v: pointer of type atomic_t + * @i: integer value to add + * + * Atomically adds @i to @v and returns true + * if the result is negative, or false when + * result is greater than or equal to zero. + */ +static __inline__ int atomic_add_negative(int i, atomic_t *v) +{ + unsigned char c; + + __asm__ __volatile__( + LOCK "addl %2,%0; sets %1" + :"=m" (v->counter), "=qm" (c) + :"ir" (i), "m" (v->counter) : "memory"); + return c; +} + +/** + * atomic_add_return - add and return + * @v: pointer of type atomic_t + * @i: integer value to add + * + * Atomically adds @i to @v and returns @i + @v + */ +static __inline__ int atomic_add_return(int i, atomic_t *v) +{ + int __i; +#ifdef CONFIG_M386 + if(unlikely(boot_cpu_data.x86==3)) + goto no_xadd; +#endif + /* Modern 486+ processor */ + __i = i; + __asm__ __volatile__( + LOCK "xaddl %0, %1;" + :"=r"(i) + :"m"(v->counter), "0"(i)); + return i + __i; + +#ifdef CONFIG_M386 +no_xadd: /* Legacy 386 processor */ + local_irq_disable(); + __i = atomic_read(v); + atomic_set(v, i + __i); + local_irq_enable(); + return i + __i; +#endif +} + +static __inline__ int atomic_sub_return(int i, atomic_t *v) +{ + return atomic_add_return(-i,v); +} + +#define atomic_inc_return(v) (atomic_add_return(1,v)) +#define atomic_dec_return(v) (atomic_sub_return(1,v)) + +/* These are x86-specific, used by some header files */ +#define atomic_clear_mask(mask, addr) \ +__asm__ __volatile__(LOCK "andl %0,%1" \ +: : "r" (~(mask)),"m" (*addr) : "memory") + +#define atomic_set_mask(mask, addr) \ +__asm__ __volatile__(LOCK "orl %0,%1" \ +: : "r" (mask),"m" (*(addr)) : "memory") + +/* Atomic operations are already serializing on x86 */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#endif diff --git a/include/asm-i386/bitops.h b/include/asm-i386/bitops.h new file mode 100644 index 00000000000..9db0b712d57 --- /dev/null +++ b/include/asm-i386/bitops.h @@ -0,0 +1,462 @@ +#ifndef _I386_BITOPS_H +#define _I386_BITOPS_H + +/* + * Copyright 1992, Linus Torvalds. + */ + +#include +#include + +/* + * These have to be done with inline assembly: that way the bit-setting + * is guaranteed to be atomic. All bit operations return 0 if the bit + * was cleared before the operation and != 0 if it was not. + * + * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1). + */ + +#ifdef CONFIG_SMP +#define LOCK_PREFIX "lock ; " +#else +#define LOCK_PREFIX "" +#endif + +#define ADDR (*(volatile long *) addr) + +/** + * set_bit - Atomically set a bit in memory + * @nr: the bit to set + * @addr: the address to start counting from + * + * This function is atomic and may not be reordered. See __set_bit() + * if you do not require the atomic guarantees. + * + * Note: there are no guarantees that this function will not be reordered + * on non x86 architectures, so if you are writting portable code, + * make sure not to rely on its reordering guarantees. + * + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ +static inline void set_bit(int nr, volatile unsigned long * addr) +{ + __asm__ __volatile__( LOCK_PREFIX + "btsl %1,%0" + :"=m" (ADDR) + :"Ir" (nr)); +} + +/** + * __set_bit - Set a bit in memory + * @nr: the bit to set + * @addr: the address to start counting from + * + * Unlike set_bit(), this function is non-atomic and may be reordered. + * If it's called on the same region of memory simultaneously, the effect + * may be that only one operation succeeds. + */ +static inline void __set_bit(int nr, volatile unsigned long * addr) +{ + __asm__( + "btsl %1,%0" + :"=m" (ADDR) + :"Ir" (nr)); +} + +/** + * clear_bit - Clears a bit in memory + * @nr: Bit to clear + * @addr: Address to start counting from + * + * clear_bit() is atomic and may not be reordered. However, it does + * not contain a memory barrier, so if it is used for locking purposes, + * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() + * in order to ensure changes are visible on other processors. + */ +static inline void clear_bit(int nr, volatile unsigned long * addr) +{ + __asm__ __volatile__( LOCK_PREFIX + "btrl %1,%0" + :"=m" (ADDR) + :"Ir" (nr)); +} + +static inline void __clear_bit(int nr, volatile unsigned long * addr) +{ + __asm__ __volatile__( + "btrl %1,%0" + :"=m" (ADDR) + :"Ir" (nr)); +} +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +/** + * __change_bit - Toggle a bit in memory + * @nr: the bit to change + * @addr: the address to start counting from + * + * Unlike change_bit(), this function is non-atomic and may be reordered. + * If it's called on the same region of memory simultaneously, the effect + * may be that only one operation succeeds. + */ +static inline void __change_bit(int nr, volatile unsigned long * addr) +{ + __asm__ __volatile__( + "btcl %1,%0" + :"=m" (ADDR) + :"Ir" (nr)); +} + +/** + * change_bit - Toggle a bit in memory + * @nr: Bit to change + * @addr: Address to start counting from + * + * change_bit() is atomic and may not be reordered. It may be + * reordered on other architectures than x86. + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ +static inline void change_bit(int nr, volatile unsigned long * addr) +{ + __asm__ __volatile__( LOCK_PREFIX + "btcl %1,%0" + :"=m" (ADDR) + :"Ir" (nr)); +} + +/** + * test_and_set_bit - Set a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It may be reordered on other architectures than x86. + * It also implies a memory barrier. + */ +static inline int test_and_set_bit(int nr, volatile unsigned long * addr) +{ + int oldbit; + + __asm__ __volatile__( LOCK_PREFIX + "btsl %2,%1\n\tsbbl %0,%0" + :"=r" (oldbit),"=m" (ADDR) + :"Ir" (nr) : "memory"); + return oldbit; +} + +/** + * __test_and_set_bit - Set a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is non-atomic and can be reordered. + * If two examples of this operation race, one can appear to succeed + * but actually fail. You must protect multiple accesses with a lock. + */ +static inline int __test_and_set_bit(int nr, volatile unsigned long * addr) +{ + int oldbit; + + __asm__( + "btsl %2,%1\n\tsbbl %0,%0" + :"=r" (oldbit),"=m" (ADDR) + :"Ir" (nr)); + return oldbit; +} + +/** + * test_and_clear_bit - Clear a bit and return its old value + * @nr: Bit to clear + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It can be reorderdered on other architectures other than x86. + * It also implies a memory barrier. + */ +static inline int test_and_clear_bit(int nr, volatile unsigned long * addr) +{ + int oldbit; + + __asm__ __volatile__( LOCK_PREFIX + "btrl %2,%1\n\tsbbl %0,%0" + :"=r" (oldbit),"=m" (ADDR) + :"Ir" (nr) : "memory"); + return oldbit; +} + +/** + * __test_and_clear_bit - Clear a bit and return its old value + * @nr: Bit to clear + * @addr: Address to count from + * + * This operation is non-atomic and can be reordered. + * If two examples of this operation race, one can appear to succeed + * but actually fail. You must protect multiple accesses with a lock. + */ +static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr) +{ + int oldbit; + + __asm__( + "btrl %2,%1\n\tsbbl %0,%0" + :"=r" (oldbit),"=m" (ADDR) + :"Ir" (nr)); + return oldbit; +} + +/* WARNING: non atomic and it can be reordered! */ +static inline int __test_and_change_bit(int nr, volatile unsigned long *addr) +{ + int oldbit; + + __asm__ __volatile__( + "btcl %2,%1\n\tsbbl %0,%0" + :"=r" (oldbit),"=m" (ADDR) + :"Ir" (nr) : "memory"); + return oldbit; +} + +/** + * test_and_change_bit - Change a bit and return its old value + * @nr: Bit to change + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static inline int test_and_change_bit(int nr, volatile unsigned long* addr) +{ + int oldbit; + + __asm__ __volatile__( LOCK_PREFIX + "btcl %2,%1\n\tsbbl %0,%0" + :"=r" (oldbit),"=m" (ADDR) + :"Ir" (nr) : "memory"); + return oldbit; +} + +#if 0 /* Fool kernel-doc since it doesn't do macros yet */ +/** + * test_bit - Determine whether a bit is set + * @nr: bit number to test + * @addr: Address to start counting from + */ +static int test_bit(int nr, const volatile void * addr); +#endif + +static inline int constant_test_bit(int nr, const volatile unsigned long *addr) +{ + return ((1UL << (nr & 31)) & (addr[nr >> 5])) != 0; +} + +static inline int variable_test_bit(int nr, const volatile unsigned long * addr) +{ + int oldbit; + + __asm__ __volatile__( + "btl %2,%1\n\tsbbl %0,%0" + :"=r" (oldbit) + :"m" (ADDR),"Ir" (nr)); + return oldbit; +} + +#define test_bit(nr,addr) \ +(__builtin_constant_p(nr) ? \ + constant_test_bit((nr),(addr)) : \ + variable_test_bit((nr),(addr))) + +#undef ADDR + +/** + * find_first_zero_bit - find the first zero bit in a memory region + * @addr: The address to start the search at + * @size: The maximum size to search + * + * Returns the bit-number of the first zero bit, not the number of the byte + * containing a bit. + */ +static inline int find_first_zero_bit(const unsigned long *addr, unsigned size) +{ + int d0, d1, d2; + int res; + + if (!size) + return 0; + /* This looks at memory. Mark it volatile to tell gcc not to move it around */ + __asm__ __volatile__( + "movl $-1,%%eax\n\t" + "xorl %%edx,%%edx\n\t" + "repe; scasl\n\t" + "je 1f\n\t" + "xorl -4(%%edi),%%eax\n\t" + "subl $4,%%edi\n\t" + "bsfl %%eax,%%edx\n" + "1:\tsubl %%ebx,%%edi\n\t" + "shll $3,%%edi\n\t" + "addl %%edi,%%edx" + :"=d" (res), "=&c" (d0), "=&D" (d1), "=&a" (d2) + :"1" ((size + 31) >> 5), "2" (addr), "b" (addr) : "memory"); + return res; +} + +/** + * find_next_zero_bit - find the first zero bit in a memory region + * @addr: The address to base the search on + * @offset: The bitnumber to start searching at + * @size: The maximum size to search + */ +int find_next_zero_bit(const unsigned long *addr, int size, int offset); + +/** + * find_first_bit - find the first set bit in a memory region + * @addr: The address to start the search at + * @size: The maximum size to search + * + * Returns the bit-number of the first set bit, not the number of the byte + * containing a bit. + */ +static inline int find_first_bit(const unsigned long *addr, unsigned size) +{ + int d0, d1; + int res; + + /* This looks at memory. Mark it volatile to tell gcc not to move it around */ + __asm__ __volatile__( + "xorl %%eax,%%eax\n\t" + "repe; scasl\n\t" + "jz 1f\n\t" + "leal -4(%%edi),%%edi\n\t" + "bsfl (%%edi),%%eax\n" + "1:\tsubl %%ebx,%%edi\n\t" + "shll $3,%%edi\n\t" + "addl %%edi,%%eax" + :"=a" (res), "=&c" (d0), "=&D" (d1) + :"1" ((size + 31) >> 5), "2" (addr), "b" (addr) : "memory"); + return res; +} + +/** + * find_next_bit - find the first set bit in a memory region + * @addr: The address to base the search on + * @offset: The bitnumber to start searching at + * @size: The maximum size to search + */ +int find_next_bit(const unsigned long *addr, int size, int offset); + +/** + * ffz - find first zero in word. + * @word: The word to search + * + * Undefined if no zero exists, so code should check against ~0UL first. + */ +static inline unsigned long ffz(unsigned long word) +{ + __asm__("bsfl %1,%0" + :"=r" (word) + :"r" (~word)); + return word; +} + +/** + * __ffs - find first bit in word. + * @word: The word to search + * + * Undefined if no bit exists, so code should check against 0 first. + */ +static inline unsigned long __ffs(unsigned long word) +{ + __asm__("bsfl %1,%0" + :"=r" (word) + :"rm" (word)); + return word; +} + +/* + * fls: find last bit set. + */ + +#define fls(x) generic_fls(x) + +#ifdef __KERNEL__ + +/* + * Every architecture must define this function. It's the fastest + * way of searching a 140-bit bitmap where the first 100 bits are + * unlikely to be set. It's guaranteed that at least one of the 140 + * bits is cleared. + */ +static inline int sched_find_first_bit(const unsigned long *b) +{ + if (unlikely(b[0])) + return __ffs(b[0]); + if (unlikely(b[1])) + return __ffs(b[1]) + 32; + if (unlikely(b[2])) + return __ffs(b[2]) + 64; + if (b[3]) + return __ffs(b[3]) + 96; + return __ffs(b[4]) + 128; +} + +/** + * ffs - find first bit set + * @x: the word to search + * + * This is defined the same way as + * the libc and compiler builtin ffs routines, therefore + * differs in spirit from the above ffz (man ffs). + */ +static inline int ffs(int x) +{ + int r; + + __asm__("bsfl %1,%0\n\t" + "jnz 1f\n\t" + "movl $-1,%0\n" + "1:" : "=r" (r) : "rm" (x)); + return r+1; +} + +/** + * hweightN - returns the hamming weight of a N-bit word + * @x: the word to weigh + * + * The Hamming Weight of a number is the total number of bits set in it. + */ + +#define hweight32(x) generic_hweight32(x) +#define hweight16(x) generic_hweight16(x) +#define hweight8(x) generic_hweight8(x) + +#endif /* __KERNEL__ */ + +#ifdef __KERNEL__ + +#define ext2_set_bit(nr,addr) \ + __test_and_set_bit((nr),(unsigned long*)addr) +#define ext2_set_bit_atomic(lock,nr,addr) \ + test_and_set_bit((nr),(unsigned long*)addr) +#define ext2_clear_bit(nr, addr) \ + __test_and_clear_bit((nr),(unsigned long*)addr) +#define ext2_clear_bit_atomic(lock,nr, addr) \ + test_and_clear_bit((nr),(unsigned long*)addr) +#define ext2_test_bit(nr, addr) test_bit((nr),(unsigned long*)addr) +#define ext2_find_first_zero_bit(addr, size) \ + find_first_zero_bit((unsigned long*)addr, size) +#define ext2_find_next_zero_bit(addr, size, off) \ + find_next_zero_bit((unsigned long*)addr, size, off) + +/* Bitmap functions for the minix filesystem. */ +#define minix_test_and_set_bit(nr,addr) __test_and_set_bit(nr,(void*)addr) +#define minix_set_bit(nr,addr) __set_bit(nr,(void*)addr) +#define minix_test_and_clear_bit(nr,addr) __test_and_clear_bit(nr,(void*)addr) +#define minix_test_bit(nr,addr) test_bit(nr,(void*)addr) +#define minix_find_first_zero_bit(addr,size) \ + find_first_zero_bit((void*)addr,size) + +#endif /* __KERNEL__ */ + +#endif /* _I386_BITOPS_H */ diff --git a/include/asm-i386/boot.h b/include/asm-i386/boot.h new file mode 100644 index 00000000000..96b228e6e79 --- /dev/null +++ b/include/asm-i386/boot.h @@ -0,0 +1,15 @@ +#ifndef _LINUX_BOOT_H +#define _LINUX_BOOT_H + +/* Don't touch these, unless you really know what you're doing. */ +#define DEF_INITSEG 0x9000 +#define DEF_SYSSEG 0x1000 +#define DEF_SETUPSEG 0x9020 +#define DEF_SYSSIZE 0x7F00 + +/* Internal svga startup constants */ +#define NORMAL_VGA 0xffff /* 80x25 mode */ +#define EXTENDED_VGA 0xfffe /* 80x50 mode */ +#define ASK_VGA 0xfffd /* ask for it at bootup */ + +#endif diff --git a/include/asm-i386/bug.h b/include/asm-i386/bug.h new file mode 100644 index 00000000000..706eb511c33 --- /dev/null +++ b/include/asm-i386/bug.h @@ -0,0 +1,25 @@ +#ifndef _I386_BUG_H +#define _I386_BUG_H + +#include + +/* + * Tell the user there is some problem. + * The offending file and line are encoded after the "officially + * undefined" opcode for parsing in the trap handler. + */ + +#ifdef CONFIG_DEBUG_BUGVERBOSE +#define BUG() \ + __asm__ __volatile__( "ud2\n" \ + "\t.word %c0\n" \ + "\t.long %c1\n" \ + : : "i" (__LINE__), "i" (__FILE__)) +#else +#define BUG() __asm__ __volatile__("ud2\n") +#endif + +#define HAVE_ARCH_BUG +#include + +#endif diff --git a/include/asm-i386/bugs.h b/include/asm-i386/bugs.h new file mode 100644 index 00000000000..6789fc275da --- /dev/null +++ b/include/asm-i386/bugs.h @@ -0,0 +1,213 @@ +/* + * include/asm-i386/bugs.h + * + * Copyright (C) 1994 Linus Torvalds + * + * Cyrix stuff, June 1998 by: + * - Rafael R. Reilova (moved everything from head.S), + * + * - Channing Corn (tests & fixes), + * - Andrew D. Balsa (code cleanup). + * + * Pentium III FXSR, SSE support + * Gareth Hughes , May 2000 + */ + +/* + * This is included by init/main.c to check for architecture-dependent bugs. + * + * Needs: + * void check_bugs(void); + */ + +#include +#include +#include +#include +#include + +static int __init no_halt(char *s) +{ + boot_cpu_data.hlt_works_ok = 0; + return 1; +} + +__setup("no-hlt", no_halt); + +static int __init mca_pentium(char *s) +{ + mca_pentium_flag = 1; + return 1; +} + +__setup("mca-pentium", mca_pentium); + +static int __init no_387(char *s) +{ + boot_cpu_data.hard_math = 0; + write_cr0(0xE | read_cr0()); + return 1; +} + +__setup("no387", no_387); + +static double __initdata x = 4195835.0; +static double __initdata y = 3145727.0; + +/* + * This used to check for exceptions.. + * However, it turns out that to support that, + * the XMM trap handlers basically had to + * be buggy. So let's have a correct XMM trap + * handler, and forget about printing out + * some status at boot. + * + * We should really only care about bugs here + * anyway. Not features. + */ +static void __init check_fpu(void) +{ + if (!boot_cpu_data.hard_math) { +#ifndef CONFIG_MATH_EMULATION + printk(KERN_EMERG "No coprocessor found and no math emulation present.\n"); + printk(KERN_EMERG "Giving up.\n"); + for (;;) ; +#endif + return; + } + +/* Enable FXSR and company _before_ testing for FP problems. */ + /* + * Verify that the FXSAVE/FXRSTOR data will be 16-byte aligned. + */ + if (offsetof(struct task_struct, thread.i387.fxsave) & 15) { + extern void __buggy_fxsr_alignment(void); + __buggy_fxsr_alignment(); + } + if (cpu_has_fxsr) { + printk(KERN_INFO "Enabling fast FPU save and restore... "); + set_in_cr4(X86_CR4_OSFXSR); + printk("done.\n"); + } + if (cpu_has_xmm) { + printk(KERN_INFO "Enabling unmasked SIMD FPU exception support... "); + set_in_cr4(X86_CR4_OSXMMEXCPT); + printk("done.\n"); + } + + /* Test for the divl bug.. */ + __asm__("fninit\n\t" + "fldl %1\n\t" + "fdivl %2\n\t" + "fmull %2\n\t" + "fldl %1\n\t" + "fsubp %%st,%%st(1)\n\t" + "fistpl %0\n\t" + "fwait\n\t" + "fninit" + : "=m" (*&boot_cpu_data.fdiv_bug) + : "m" (*&x), "m" (*&y)); + if (boot_cpu_data.fdiv_bug) + printk("Hmm, FPU with FDIV bug.\n"); +} + +static void __init check_hlt(void) +{ + printk(KERN_INFO "Checking 'hlt' instruction... "); + if (!boot_cpu_data.hlt_works_ok) { + printk("disabled\n"); + return; + } + __asm__ __volatile__("hlt ; hlt ; hlt ; hlt"); + printk("OK.\n"); +} + +/* + * Most 386 processors have a bug where a POPAD can lock the + * machine even from user space. + */ + +static void __init check_popad(void) +{ +#ifndef CONFIG_X86_POPAD_OK + int res, inp = (int) &res; + + printk(KERN_INFO "Checking for popad bug... "); + __asm__ __volatile__( + "movl $12345678,%%eax; movl $0,%%edi; pusha; popa; movl (%%edx,%%edi),%%ecx " + : "=&a" (res) + : "d" (inp) + : "ecx", "edi" ); + /* If this fails, it means that any user program may lock the CPU hard. Too bad. */ + if (res != 12345678) printk( "Buggy.\n" ); + else printk( "OK.\n" ); +#endif +} + +/* + * Check whether we are able to run this kernel safely on SMP. + * + * - In order to run on a i386, we need to be compiled for i386 + * (for due to lack of "invlpg" and working WP on a i386) + * - In order to run on anything without a TSC, we need to be + * compiled for a i486. + * - In order to support the local APIC on a buggy Pentium machine, + * we need to be compiled with CONFIG_X86_GOOD_APIC disabled, + * which happens implicitly if compiled for a Pentium or lower + * (unless an advanced selection of CPU features is used) as an + * otherwise config implies a properly working local APIC without + * the need to do extra reads from the APIC. +*/ + +static void __init check_config(void) +{ +/* + * We'd better not be a i386 if we're configured to use some + * i486+ only features! (WP works in supervisor mode and the + * new "invlpg" and "bswap" instructions) + */ +#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_BSWAP) + if (boot_cpu_data.x86 == 3) + panic("Kernel requires i486+ for 'invlpg' and other features"); +#endif + +/* + * If we configured ourselves for a TSC, we'd better have one! + */ +#ifdef CONFIG_X86_TSC + if (!cpu_has_tsc) + panic("Kernel compiled for Pentium+, requires TSC feature!"); +#endif + +/* + * If we were told we had a good local APIC, check for buggy Pentia, + * i.e. all B steppings and the C2 stepping of P54C when using their + * integrated APIC (see 11AP erratum in "Pentium Processor + * Specification Update"). + */ +#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_GOOD_APIC) + if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL + && cpu_has_apic + && boot_cpu_data.x86 == 5 + && boot_cpu_data.x86_model == 2 + && (boot_cpu_data.x86_mask < 6 || boot_cpu_data.x86_mask == 11)) + panic("Kernel compiled for PMMX+, assumes a local APIC without the read-before-write bug!"); +#endif +} + +extern void alternative_instructions(void); + +static void __init check_bugs(void) +{ + identify_cpu(&boot_cpu_data); +#ifndef CONFIG_SMP + printk("CPU: "); + print_cpu_info(&boot_cpu_data); +#endif + check_config(); + check_fpu(); + check_hlt(); + check_popad(); + system_utsname.machine[1] = '0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86); + alternative_instructions(); +} diff --git a/include/asm-i386/byteorder.h b/include/asm-i386/byteorder.h new file mode 100644 index 00000000000..a0d73f48d5b --- /dev/null +++ b/include/asm-i386/byteorder.h @@ -0,0 +1,59 @@ +#ifndef _I386_BYTEORDER_H +#define _I386_BYTEORDER_H + +#include +#include + +#ifdef __GNUC__ + +/* For avoiding bswap on i386 */ +#ifdef __KERNEL__ +#include +#endif + +static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x) +{ +#ifdef CONFIG_X86_BSWAP + __asm__("bswap %0" : "=r" (x) : "0" (x)); +#else + __asm__("xchgb %b0,%h0\n\t" /* swap lower bytes */ + "rorl $16,%0\n\t" /* swap words */ + "xchgb %b0,%h0" /* swap higher bytes */ + :"=q" (x) + : "0" (x)); +#endif + return x; +} + +static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 val) +{ + union { + struct { __u32 a,b; } s; + __u64 u; + } v; + v.u = val; +#ifdef CONFIG_X86_BSWAP + asm("bswapl %0 ; bswapl %1 ; xchgl %0,%1" + : "=r" (v.s.a), "=r" (v.s.b) + : "0" (v.s.a), "1" (v.s.b)); +#else + v.s.a = ___arch__swab32(v.s.a); + v.s.b = ___arch__swab32(v.s.b); + asm("xchgl %0,%1" : "=r" (v.s.a), "=r" (v.s.b) : "0" (v.s.a), "1" (v.s.b)); +#endif + return v.u; +} + +/* Do not define swab16. Gcc is smart enough to recognize "C" version and + convert it into rotation or exhange. */ + +#define __arch__swab64(x) ___arch__swab64(x) +#define __arch__swab32(x) ___arch__swab32(x) + +#define __BYTEORDER_HAS_U64__ + +#endif /* __GNUC__ */ + +#include + +#endif /* _I386_BYTEORDER_H */ diff --git a/include/asm-i386/cache.h b/include/asm-i386/cache.h new file mode 100644 index 00000000000..849788710fe --- /dev/null +++ b/include/asm-i386/cache.h @@ -0,0 +1,15 @@ +/* + * include/asm-i386/cache.h + */ +#ifndef __ARCH_I386_CACHE_H +#define __ARCH_I386_CACHE_H + +#include + +/* L1 cache line size */ +#define L1_CACHE_SHIFT (CONFIG_X86_L1_CACHE_SHIFT) +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) + +#define L1_CACHE_SHIFT_MAX 7 /* largest L1 which this arch supports */ + +#endif diff --git a/include/asm-i386/cacheflush.h b/include/asm-i386/cacheflush.h new file mode 100644 index 00000000000..2ea36dea37d --- /dev/null +++ b/include/asm-i386/cacheflush.h @@ -0,0 +1,34 @@ +#ifndef _I386_CACHEFLUSH_H +#define _I386_CACHEFLUSH_H + +/* Keep includes the same across arches. */ +#include + +/* Caches aren't brain-dead on the intel. */ +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +#define flush_icache_range(start, end) do { } while (0) +#define flush_icache_page(vma,pg) do { } while (0) +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) +#define flush_cache_vmap(start, end) do { } while (0) +#define flush_cache_vunmap(start, end) do { } while (0) + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) + +void global_flush_tlb(void); +int change_page_attr(struct page *page, int numpages, pgprot_t prot); + +#ifdef CONFIG_DEBUG_PAGEALLOC +/* internal debugging function */ +void kernel_map_pages(struct page *page, int numpages, int enable); +#endif + +#endif /* _I386_CACHEFLUSH_H */ diff --git a/include/asm-i386/checksum.h b/include/asm-i386/checksum.h new file mode 100644 index 00000000000..d76a5f081c9 --- /dev/null +++ b/include/asm-i386/checksum.h @@ -0,0 +1,192 @@ +#ifndef _I386_CHECKSUM_H +#define _I386_CHECKSUM_H + +#include + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +asmlinkage unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum); + +/* + * the same as csum_partial, but copies from src while it + * checksums, and handles user-space pointer exceptions correctly, when needed. + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +asmlinkage unsigned int csum_partial_copy_generic(const unsigned char *src, unsigned char *dst, + int len, int sum, int *src_err_ptr, int *dst_err_ptr); + +/* + * Note: when you get a NULL pointer exception here this means someone + * passed in an incorrect kernel address to one of these functions. + * + * If you use these functions directly please don't forget the + * verify_area(). + */ +static __inline__ +unsigned int csum_partial_copy_nocheck (const unsigned char *src, unsigned char *dst, + int len, int sum) +{ + return csum_partial_copy_generic ( src, dst, len, sum, NULL, NULL); +} + +static __inline__ +unsigned int csum_partial_copy_from_user(const unsigned char __user *src, unsigned char *dst, + int len, int sum, int *err_ptr) +{ + might_sleep(); + return csum_partial_copy_generic((__force unsigned char *)src, dst, + len, sum, err_ptr, NULL); +} + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + * + * By Jorge Cwik , adapted for linux by + * Arnt Gulbrandsen. + */ +static inline unsigned short ip_fast_csum(unsigned char * iph, + unsigned int ihl) +{ + unsigned int sum; + + __asm__ __volatile__( + "movl (%1), %0 ;\n" + "subl $4, %2 ;\n" + "jbe 2f ;\n" + "addl 4(%1), %0 ;\n" + "adcl 8(%1), %0 ;\n" + "adcl 12(%1), %0 ;\n" +"1: adcl 16(%1), %0 ;\n" + "lea 4(%1), %1 ;\n" + "decl %2 ;\n" + "jne 1b ;\n" + "adcl $0, %0 ;\n" + "movl %0, %2 ;\n" + "shrl $16, %0 ;\n" + "addw %w2, %w0 ;\n" + "adcl $0, %0 ;\n" + "notl %0 ;\n" +"2: ;\n" + /* Since the input registers which are loaded with iph and ipl + are modified, we must also specify them as outputs, or gcc + will assume they contain their original values. */ + : "=r" (sum), "=r" (iph), "=r" (ihl) + : "1" (iph), "2" (ihl) + : "memory"); + return(sum); +} + +/* + * Fold a partial checksum + */ + +static inline unsigned int csum_fold(unsigned int sum) +{ + __asm__( + "addl %1, %0 ;\n" + "adcl $0xffff, %0 ;\n" + : "=r" (sum) + : "r" (sum << 16), "0" (sum & 0xffff0000) + ); + return (~sum) >> 16; +} + +static inline unsigned long csum_tcpudp_nofold(unsigned long saddr, + unsigned long daddr, + unsigned short len, + unsigned short proto, + unsigned int sum) +{ + __asm__( + "addl %1, %0 ;\n" + "adcl %2, %0 ;\n" + "adcl %3, %0 ;\n" + "adcl $0, %0 ;\n" + : "=r" (sum) + : "g" (daddr), "g"(saddr), "g"((ntohs(len)<<16)+proto*256), "0"(sum)); + return sum; +} + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline unsigned short int csum_tcpudp_magic(unsigned long saddr, + unsigned long daddr, + unsigned short len, + unsigned short proto, + unsigned int sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ + +static inline unsigned short ip_compute_csum(unsigned char * buff, int len) +{ + return csum_fold (csum_partial(buff, len, 0)); +} + +#define _HAVE_ARCH_IPV6_CSUM +static __inline__ unsigned short int csum_ipv6_magic(struct in6_addr *saddr, + struct in6_addr *daddr, + __u32 len, + unsigned short proto, + unsigned int sum) +{ + __asm__( + "addl 0(%1), %0 ;\n" + "adcl 4(%1), %0 ;\n" + "adcl 8(%1), %0 ;\n" + "adcl 12(%1), %0 ;\n" + "adcl 0(%2), %0 ;\n" + "adcl 4(%2), %0 ;\n" + "adcl 8(%2), %0 ;\n" + "adcl 12(%2), %0 ;\n" + "adcl %3, %0 ;\n" + "adcl %4, %0 ;\n" + "adcl $0, %0 ;\n" + : "=&r" (sum) + : "r" (saddr), "r" (daddr), + "r"(htonl(len)), "r"(htonl(proto)), "0"(sum)); + + return csum_fold(sum); +} + +/* + * Copy and checksum to user + */ +#define HAVE_CSUM_COPY_USER +static __inline__ unsigned int csum_and_copy_to_user(const unsigned char *src, + unsigned char __user *dst, + int len, int sum, + int *err_ptr) +{ + might_sleep(); + if (access_ok(VERIFY_WRITE, dst, len)) + return csum_partial_copy_generic(src, (__force unsigned char *)dst, len, sum, NULL, err_ptr); + + if (len) + *err_ptr = -EFAULT; + + return -1; /* invalid checksum */ +} + +#endif diff --git a/include/asm-i386/cpu.h b/include/asm-i386/cpu.h new file mode 100644 index 00000000000..002740b2195 --- /dev/null +++ b/include/asm-i386/cpu.h @@ -0,0 +1,19 @@ +#ifndef _ASM_I386_CPU_H_ +#define _ASM_I386_CPU_H_ + +#include +#include +#include +#include + +#include + +struct i386_cpu { + struct cpu cpu; +}; +extern int arch_register_cpu(int num); +#ifdef CONFIG_HOTPLUG_CPU +extern void arch_unregister_cpu(int); +#endif + +#endif /* _ASM_I386_CPU_H_ */ diff --git a/include/asm-i386/cpufeature.h b/include/asm-i386/cpufeature.h new file mode 100644 index 00000000000..e147cabd3bf --- /dev/null +++ b/include/asm-i386/cpufeature.h @@ -0,0 +1,129 @@ +/* + * cpufeature.h + * + * Defines x86 CPU feature bits + */ + +#ifndef __ASM_I386_CPUFEATURE_H +#define __ASM_I386_CPUFEATURE_H + +#include + +#define NCAPINTS 7 /* N 32-bit words worth of info */ + +/* Intel-defined CPU features, CPUID level 0x00000001 (edx), word 0 */ +#define X86_FEATURE_FPU (0*32+ 0) /* Onboard FPU */ +#define X86_FEATURE_VME (0*32+ 1) /* Virtual Mode Extensions */ +#define X86_FEATURE_DE (0*32+ 2) /* Debugging Extensions */ +#define X86_FEATURE_PSE (0*32+ 3) /* Page Size Extensions */ +#define X86_FEATURE_TSC (0*32+ 4) /* Time Stamp Counter */ +#define X86_FEATURE_MSR (0*32+ 5) /* Model-Specific Registers, RDMSR, WRMSR */ +#define X86_FEATURE_PAE (0*32+ 6) /* Physical Address Extensions */ +#define X86_FEATURE_MCE (0*32+ 7) /* Machine Check Architecture */ +#define X86_FEATURE_CX8 (0*32+ 8) /* CMPXCHG8 instruction */ +#define X86_FEATURE_APIC (0*32+ 9) /* Onboard APIC */ +#define X86_FEATURE_SEP (0*32+11) /* SYSENTER/SYSEXIT */ +#define X86_FEATURE_MTRR (0*32+12) /* Memory Type Range Registers */ +#define X86_FEATURE_PGE (0*32+13) /* Page Global Enable */ +#define X86_FEATURE_MCA (0*32+14) /* Machine Check Architecture */ +#define X86_FEATURE_CMOV (0*32+15) /* CMOV instruction (FCMOVCC and FCOMI too if FPU present) */ +#define X86_FEATURE_PAT (0*32+16) /* Page Attribute Table */ +#define X86_FEATURE_PSE36 (0*32+17) /* 36-bit PSEs */ +#define X86_FEATURE_PN (0*32+18) /* Processor serial number */ +#define X86_FEATURE_CLFLSH (0*32+19) /* Supports the CLFLUSH instruction */ +#define X86_FEATURE_DTES (0*32+21) /* Debug Trace Store */ +#define X86_FEATURE_ACPI (0*32+22) /* ACPI via MSR */ +#define X86_FEATURE_MMX (0*32+23) /* Multimedia Extensions */ +#define X86_FEATURE_FXSR (0*32+24) /* FXSAVE and FXRSTOR instructions (fast save and restore */ + /* of FPU context), and CR4.OSFXSR available */ +#define X86_FEATURE_XMM (0*32+25) /* Streaming SIMD Extensions */ +#define X86_FEATURE_XMM2 (0*32+26) /* Streaming SIMD Extensions-2 */ +#define X86_FEATURE_SELFSNOOP (0*32+27) /* CPU self snoop */ +#define X86_FEATURE_HT (0*32+28) /* Hyper-Threading */ +#define X86_FEATURE_ACC (0*32+29) /* Automatic clock control */ +#define X86_FEATURE_IA64 (0*32+30) /* IA-64 processor */ + +/* AMD-defined CPU features, CPUID level 0x80000001, word 1 */ +/* Don't duplicate feature flags which are redundant with Intel! */ +#define X86_FEATURE_SYSCALL (1*32+11) /* SYSCALL/SYSRET */ +#define X86_FEATURE_MP (1*32+19) /* MP Capable. */ +#define X86_FEATURE_NX (1*32+20) /* Execute Disable */ +#define X86_FEATURE_MMXEXT (1*32+22) /* AMD MMX extensions */ +#define X86_FEATURE_LM (1*32+29) /* Long Mode (x86-64) */ +#define X86_FEATURE_3DNOWEXT (1*32+30) /* AMD 3DNow! extensions */ +#define X86_FEATURE_3DNOW (1*32+31) /* 3DNow! */ + +/* Transmeta-defined CPU features, CPUID level 0x80860001, word 2 */ +#define X86_FEATURE_RECOVERY (2*32+ 0) /* CPU in recovery mode */ +#define X86_FEATURE_LONGRUN (2*32+ 1) /* Longrun power control */ +#define X86_FEATURE_LRTI (2*32+ 3) /* LongRun table interface */ + +/* Other features, Linux-defined mapping, word 3 */ +/* This range is used for feature bits which conflict or are synthesized */ +#define X86_FEATURE_CXMMX (3*32+ 0) /* Cyrix MMX extensions */ +#define X86_FEATURE_K6_MTRR (3*32+ 1) /* AMD K6 nonstandard MTRRs */ +#define X86_FEATURE_CYRIX_ARR (3*32+ 2) /* Cyrix ARRs (= MTRRs) */ +#define X86_FEATURE_CENTAUR_MCR (3*32+ 3) /* Centaur MCRs (= MTRRs) */ +/* cpu types for specific tunings: */ +#define X86_FEATURE_K8 (3*32+ 4) /* Opteron, Athlon64 */ +#define X86_FEATURE_K7 (3*32+ 5) /* Athlon */ +#define X86_FEATURE_P3 (3*32+ 6) /* P3 */ +#define X86_FEATURE_P4 (3*32+ 7) /* P4 */ + +/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */ +#define X86_FEATURE_XMM3 (4*32+ 0) /* Streaming SIMD Extensions-3 */ +#define X86_FEATURE_MWAIT (4*32+ 3) /* Monitor/Mwait support */ +#define X86_FEATURE_DSCPL (4*32+ 4) /* CPL Qualified Debug Store */ +#define X86_FEATURE_EST (4*32+ 7) /* Enhanced SpeedStep */ +#define X86_FEATURE_TM2 (4*32+ 8) /* Thermal Monitor 2 */ +#define X86_FEATURE_CID (4*32+10) /* Context ID */ +#define X86_FEATURE_CX16 (4*32+13) /* CMPXCHG16B */ +#define X86_FEATURE_XTPR (4*32+14) /* Send Task Priority Messages */ + +/* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */ +#define X86_FEATURE_XSTORE (5*32+ 2) /* on-CPU RNG present (xstore insn) */ +#define X86_FEATURE_XSTORE_EN (5*32+ 3) /* on-CPU RNG enabled */ +#define X86_FEATURE_XCRYPT (5*32+ 6) /* on-CPU crypto (xcrypt insn) */ +#define X86_FEATURE_XCRYPT_EN (5*32+ 7) /* on-CPU crypto enabled */ + +/* More extended AMD flags: CPUID level 0x80000001, ecx, word 6 */ +#define X86_FEATURE_LAHF_LM (5*32+ 0) /* LAHF/SAHF in long mode */ +#define X86_FEATURE_CMP_LEGACY (5*32+ 1) /* If yes HyperThreading not valid */ + +#define cpu_has(c, bit) test_bit(bit, (c)->x86_capability) +#define boot_cpu_has(bit) test_bit(bit, boot_cpu_data.x86_capability) + +#define cpu_has_fpu boot_cpu_has(X86_FEATURE_FPU) +#define cpu_has_vme boot_cpu_has(X86_FEATURE_VME) +#define cpu_has_de boot_cpu_has(X86_FEATURE_DE) +#define cpu_has_pse boot_cpu_has(X86_FEATURE_PSE) +#define cpu_has_tsc boot_cpu_has(X86_FEATURE_TSC) +#define cpu_has_pae boot_cpu_has(X86_FEATURE_PAE) +#define cpu_has_pge boot_cpu_has(X86_FEATURE_PGE) +#define cpu_has_apic boot_cpu_has(X86_FEATURE_APIC) +#define cpu_has_sep boot_cpu_has(X86_FEATURE_SEP) +#define cpu_has_mtrr boot_cpu_has(X86_FEATURE_MTRR) +#define cpu_has_mmx boot_cpu_has(X86_FEATURE_MMX) +#define cpu_has_fxsr boot_cpu_has(X86_FEATURE_FXSR) +#define cpu_has_xmm boot_cpu_has(X86_FEATURE_XMM) +#define cpu_has_xmm2 boot_cpu_has(X86_FEATURE_XMM2) +#define cpu_has_xmm3 boot_cpu_has(X86_FEATURE_XMM3) +#define cpu_has_ht boot_cpu_has(X86_FEATURE_HT) +#define cpu_has_mp boot_cpu_has(X86_FEATURE_MP) +#define cpu_has_nx boot_cpu_has(X86_FEATURE_NX) +#define cpu_has_k6_mtrr boot_cpu_has(X86_FEATURE_K6_MTRR) +#define cpu_has_cyrix_arr boot_cpu_has(X86_FEATURE_CYRIX_ARR) +#define cpu_has_centaur_mcr boot_cpu_has(X86_FEATURE_CENTAUR_MCR) +#define cpu_has_xstore boot_cpu_has(X86_FEATURE_XSTORE) +#define cpu_has_xstore_enabled boot_cpu_has(X86_FEATURE_XSTORE_EN) +#define cpu_has_xcrypt boot_cpu_has(X86_FEATURE_XCRYPT) +#define cpu_has_xcrypt_enabled boot_cpu_has(X86_FEATURE_XCRYPT_EN) + +#endif /* __ASM_I386_CPUFEATURE_H */ + +/* + * Local Variables: + * mode:c + * comment-column:42 + * End: + */ diff --git a/include/asm-i386/cputime.h b/include/asm-i386/cputime.h new file mode 100644 index 00000000000..398ed7cd171 --- /dev/null +++ b/include/asm-i386/cputime.h @@ -0,0 +1,6 @@ +#ifndef __I386_CPUTIME_H +#define __I386_CPUTIME_H + +#include + +#endif /* __I386_CPUTIME_H */ diff --git a/include/asm-i386/current.h b/include/asm-i386/current.h new file mode 100644 index 00000000000..d97328951f5 --- /dev/null +++ b/include/asm-i386/current.h @@ -0,0 +1,15 @@ +#ifndef _I386_CURRENT_H +#define _I386_CURRENT_H + +#include + +struct task_struct; + +static inline struct task_struct * get_current(void) +{ + return current_thread_info()->task; +} + +#define current get_current() + +#endif /* !(_I386_CURRENT_H) */ diff --git a/include/asm-i386/debugreg.h b/include/asm-i386/debugreg.h new file mode 100644 index 00000000000..f0b2b06ae0f --- /dev/null +++ b/include/asm-i386/debugreg.h @@ -0,0 +1,64 @@ +#ifndef _I386_DEBUGREG_H +#define _I386_DEBUGREG_H + + +/* Indicate the register numbers for a number of the specific + debug registers. Registers 0-3 contain the addresses we wish to trap on */ +#define DR_FIRSTADDR 0 /* u_debugreg[DR_FIRSTADDR] */ +#define DR_LASTADDR 3 /* u_debugreg[DR_LASTADDR] */ + +#define DR_STATUS 6 /* u_debugreg[DR_STATUS] */ +#define DR_CONTROL 7 /* u_debugreg[DR_CONTROL] */ + +/* Define a few things for the status register. We can use this to determine + which debugging register was responsible for the trap. The other bits + are either reserved or not of interest to us. */ + +#define DR_TRAP0 (0x1) /* db0 */ +#define DR_TRAP1 (0x2) /* db1 */ +#define DR_TRAP2 (0x4) /* db2 */ +#define DR_TRAP3 (0x8) /* db3 */ + +#define DR_STEP (0x4000) /* single-step */ +#define DR_SWITCH (0x8000) /* task switch */ + +/* Now define a bunch of things for manipulating the control register. + The top two bytes of the control register consist of 4 fields of 4 + bits - each field corresponds to one of the four debug registers, + and indicates what types of access we trap on, and how large the data + field is that we are looking at */ + +#define DR_CONTROL_SHIFT 16 /* Skip this many bits in ctl register */ +#define DR_CONTROL_SIZE 4 /* 4 control bits per register */ + +#define DR_RW_EXECUTE (0x0) /* Settings for the access types to trap on */ +#define DR_RW_WRITE (0x1) +#define DR_RW_READ (0x3) + +#define DR_LEN_1 (0x0) /* Settings for data length to trap on */ +#define DR_LEN_2 (0x4) +#define DR_LEN_4 (0xC) + +/* The low byte to the control register determine which registers are + enabled. There are 4 fields of two bits. One bit is "local", meaning + that the processor will reset the bit after a task switch and the other + is global meaning that we have to explicitly reset the bit. With linux, + you can use either one, since we explicitly zero the register when we enter + kernel mode. */ + +#define DR_LOCAL_ENABLE_SHIFT 0 /* Extra shift to the local enable bit */ +#define DR_GLOBAL_ENABLE_SHIFT 1 /* Extra shift to the global enable bit */ +#define DR_ENABLE_SIZE 2 /* 2 enable bits per register */ + +#define DR_LOCAL_ENABLE_MASK (0x55) /* Set local bits for all 4 regs */ +#define DR_GLOBAL_ENABLE_MASK (0xAA) /* Set global bits for all 4 regs */ + +/* The second byte to the control register has a few special things. + We can slow the instruction pipeline for instructions coming via the + gdt or the ldt if we want to. I am not sure why this is an advantage */ + +#define DR_CONTROL_RESERVED (0xFC00) /* Reserved by Intel */ +#define DR_LOCAL_SLOWDOWN (0x100) /* Local slow the pipeline */ +#define DR_GLOBAL_SLOWDOWN (0x200) /* Global slow the pipeline */ + +#endif diff --git a/include/asm-i386/delay.h b/include/asm-i386/delay.h new file mode 100644 index 00000000000..456db8501c0 --- /dev/null +++ b/include/asm-i386/delay.h @@ -0,0 +1,26 @@ +#ifndef _I386_DELAY_H +#define _I386_DELAY_H + +/* + * Copyright (C) 1993 Linus Torvalds + * + * Delay routines calling functions in arch/i386/lib/delay.c + */ + +extern void __bad_udelay(void); +extern void __bad_ndelay(void); + +extern void __udelay(unsigned long usecs); +extern void __ndelay(unsigned long nsecs); +extern void __const_udelay(unsigned long usecs); +extern void __delay(unsigned long loops); + +#define udelay(n) (__builtin_constant_p(n) ? \ + ((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c7ul)) : \ + __udelay(n)) + +#define ndelay(n) (__builtin_constant_p(n) ? \ + ((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \ + __ndelay(n)) + +#endif /* defined(_I386_DELAY_H) */ diff --git a/include/asm-i386/desc.h b/include/asm-i386/desc.h new file mode 100644 index 00000000000..11e67811a99 --- /dev/null +++ b/include/asm-i386/desc.h @@ -0,0 +1,144 @@ +#ifndef __ARCH_DESC_H +#define __ARCH_DESC_H + +#include +#include + +#define CPU_16BIT_STACK_SIZE 1024 + +#ifndef __ASSEMBLY__ + +#include +#include +#include + +#include + +extern struct desc_struct cpu_gdt_table[GDT_ENTRIES]; +DECLARE_PER_CPU(struct desc_struct, cpu_gdt_table[GDT_ENTRIES]); + +DECLARE_PER_CPU(unsigned char, cpu_16bit_stack[CPU_16BIT_STACK_SIZE]); + +struct Xgt_desc_struct { + unsigned short size; + unsigned long address __attribute__((packed)); + unsigned short pad; +} __attribute__ ((packed)); + +extern struct Xgt_desc_struct idt_descr, cpu_gdt_descr[NR_CPUS]; + +#define load_TR_desc() __asm__ __volatile__("ltr %%ax"::"a" (GDT_ENTRY_TSS*8)) +#define load_LDT_desc() __asm__ __volatile__("lldt %%ax"::"a" (GDT_ENTRY_LDT*8)) + +/* + * This is the ldt that every process will get unless we need + * something other than this. + */ +extern struct desc_struct default_ldt[]; +extern void set_intr_gate(unsigned int irq, void * addr); + +#define _set_tssldt_desc(n,addr,limit,type) \ +__asm__ __volatile__ ("movw %w3,0(%2)\n\t" \ + "movw %%ax,2(%2)\n\t" \ + "rorl $16,%%eax\n\t" \ + "movb %%al,4(%2)\n\t" \ + "movb %4,5(%2)\n\t" \ + "movb $0,6(%2)\n\t" \ + "movb %%ah,7(%2)\n\t" \ + "rorl $16,%%eax" \ + : "=m"(*(n)) : "a" (addr), "r"(n), "ir"(limit), "i"(type)) + +static inline void __set_tss_desc(unsigned int cpu, unsigned int entry, void *addr) +{ + _set_tssldt_desc(&per_cpu(cpu_gdt_table, cpu)[entry], (int)addr, + offsetof(struct tss_struct, __cacheline_filler) - 1, 0x89); +} + +#define set_tss_desc(cpu,addr) __set_tss_desc(cpu, GDT_ENTRY_TSS, addr) + +static inline void set_ldt_desc(unsigned int cpu, void *addr, unsigned int size) +{ + _set_tssldt_desc(&per_cpu(cpu_gdt_table, cpu)[GDT_ENTRY_LDT], (int)addr, ((size << 3)-1), 0x82); +} + +#define LDT_entry_a(info) \ + ((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff)) + +#define LDT_entry_b(info) \ + (((info)->base_addr & 0xff000000) | \ + (((info)->base_addr & 0x00ff0000) >> 16) | \ + ((info)->limit & 0xf0000) | \ + (((info)->read_exec_only ^ 1) << 9) | \ + ((info)->contents << 10) | \ + (((info)->seg_not_present ^ 1) << 15) | \ + ((info)->seg_32bit << 22) | \ + ((info)->limit_in_pages << 23) | \ + ((info)->useable << 20) | \ + 0x7000) + +#define LDT_empty(info) (\ + (info)->base_addr == 0 && \ + (info)->limit == 0 && \ + (info)->contents == 0 && \ + (info)->read_exec_only == 1 && \ + (info)->seg_32bit == 0 && \ + (info)->limit_in_pages == 0 && \ + (info)->seg_not_present == 1 && \ + (info)->useable == 0 ) + +#if TLS_SIZE != 24 +# error update this code. +#endif + +static inline void load_TLS(struct thread_struct *t, unsigned int cpu) +{ +#define C(i) per_cpu(cpu_gdt_table, cpu)[GDT_ENTRY_TLS_MIN + i] = t->tls_array[i] + C(0); C(1); C(2); +#undef C +} + +static inline void clear_LDT(void) +{ + int cpu = get_cpu(); + + set_ldt_desc(cpu, &default_ldt[0], 5); + load_LDT_desc(); + put_cpu(); +} + +/* + * load one particular LDT into the current CPU + */ +static inline void load_LDT_nolock(mm_context_t *pc, int cpu) +{ + void *segments = pc->ldt; + int count = pc->size; + + if (likely(!count)) { + segments = &default_ldt[0]; + count = 5; + } + + set_ldt_desc(cpu, segments, count); + load_LDT_desc(); +} + +static inline void load_LDT(mm_context_t *pc) +{ + int cpu = get_cpu(); + load_LDT_nolock(pc, cpu); + put_cpu(); +} + +static inline unsigned long get_desc_base(unsigned long *desc) +{ + unsigned long base; + base = ((desc[0] >> 16) & 0x0000ffff) | + ((desc[1] << 16) & 0x00ff0000) | + (desc[1] & 0xff000000); + return base; +} + +#endif /* !__ASSEMBLY__ */ + +#endif diff --git a/include/asm-i386/div64.h b/include/asm-i386/div64.h new file mode 100644 index 00000000000..28ed8b296af --- /dev/null +++ b/include/asm-i386/div64.h @@ -0,0 +1,48 @@ +#ifndef __I386_DIV64 +#define __I386_DIV64 + +/* + * do_div() is NOT a C function. It wants to return + * two values (the quotient and the remainder), but + * since that doesn't work very well in C, what it + * does is: + * + * - modifies the 64-bit dividend _in_place_ + * - returns the 32-bit remainder + * + * This ends up being the most efficient "calling + * convention" on x86. + */ +#define do_div(n,base) ({ \ + unsigned long __upper, __low, __high, __mod, __base; \ + __base = (base); \ + asm("":"=a" (__low), "=d" (__high):"A" (n)); \ + __upper = __high; \ + if (__high) { \ + __upper = __high % (__base); \ + __high = __high / (__base); \ + } \ + asm("divl %2":"=a" (__low), "=d" (__mod):"rm" (__base), "0" (__low), "1" (__upper)); \ + asm("":"=A" (n):"a" (__low),"d" (__high)); \ + __mod; \ +}) + +/* + * (long)X = ((long long)divs) / (long)div + * (long)rem = ((long long)divs) % (long)div + * + * Warning, this will do an exception if X overflows. + */ +#define div_long_long_rem(a,b,c) div_ll_X_l_rem(a,b,c) + +extern inline long +div_ll_X_l_rem(long long divs, long div, long *rem) +{ + long dum2; + __asm__("divl %2":"=a"(dum2), "=d"(*rem) + : "rm"(div), "A"(divs)); + + return dum2; + +} +#endif diff --git a/include/asm-i386/dma-mapping.h b/include/asm-i386/dma-mapping.h new file mode 100644 index 00000000000..563964b2995 --- /dev/null +++ b/include/asm-i386/dma-mapping.h @@ -0,0 +1,177 @@ +#ifndef _ASM_I386_DMA_MAPPING_H +#define _ASM_I386_DMA_MAPPING_H + +#include + +#include +#include +#include + +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) +#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) + +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, unsigned int __nocast flag); + +void dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle); + +static inline dma_addr_t +dma_map_single(struct device *dev, void *ptr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + flush_write_buffers(); + return virt_to_phys(ptr); +} + +static inline void +dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); +} + +static inline int +dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction direction) +{ + int i; + + BUG_ON(direction == DMA_NONE); + + for (i = 0; i < nents; i++ ) { + BUG_ON(!sg[i].page); + + sg[i].dma_address = page_to_phys(sg[i].page) + sg[i].offset; + } + + flush_write_buffers(); + return nents; +} + +static inline dma_addr_t +dma_map_page(struct device *dev, struct page *page, unsigned long offset, + size_t size, enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + return page_to_phys(page) + offset; +} + +static inline void +dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); +} + + +static inline void +dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); +} + +static inline void +dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) +{ +} + +static inline void +dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) +{ + flush_write_buffers(); +} + +static inline void +dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ +} + +static inline void +dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + flush_write_buffers(); +} + +static inline void +dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, + enum dma_data_direction direction) +{ +} + +static inline void +dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, + enum dma_data_direction direction) +{ + flush_write_buffers(); +} + +static inline int +dma_mapping_error(dma_addr_t dma_addr) +{ + return 0; +} + +static inline int +dma_supported(struct device *dev, u64 mask) +{ + /* + * we fall back to GFP_DMA when the mask isn't all 1s, + * so we can't guarantee allocations that must be + * within a tighter range than GFP_DMA.. + */ + if(mask < 0x00ffffff) + return 0; + + return 1; +} + +static inline int +dma_set_mask(struct device *dev, u64 mask) +{ + if(!dev->dma_mask || !dma_supported(dev, mask)) + return -EIO; + + *dev->dma_mask = mask; + + return 0; +} + +static inline int +dma_get_cache_alignment(void) +{ + /* no easy way to get cache size on all x86, so return the + * maximum possible, to be safe */ + return (1 << L1_CACHE_SHIFT_MAX); +} + +#define dma_is_consistent(d) (1) + +static inline void +dma_cache_sync(void *vaddr, size_t size, + enum dma_data_direction direction) +{ + flush_write_buffers(); +} + +#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY +extern int +dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, + dma_addr_t device_addr, size_t size, int flags); + +extern void +dma_release_declared_memory(struct device *dev); + +extern void * +dma_mark_declared_memory_occupied(struct device *dev, + dma_addr_t device_addr, size_t size); + +#endif diff --git a/include/asm-i386/dma.h b/include/asm-i386/dma.h new file mode 100644 index 00000000000..f24b2bba283 --- /dev/null +++ b/include/asm-i386/dma.h @@ -0,0 +1,298 @@ +/* $Id: dma.h,v 1.7 1992/12/14 00:29:34 root Exp root $ + * linux/include/asm/dma.h: Defines for using and allocating dma channels. + * Written by Hennus Bergman, 1992. + * High DMA channel support & info by Hannu Savolainen + * and John Boyd, Nov. 1992. + */ + +#ifndef _ASM_DMA_H +#define _ASM_DMA_H + +#include +#include /* And spinlocks */ +#include /* need byte IO */ +#include + + +#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER +#define dma_outb outb_p +#else +#define dma_outb outb +#endif + +#define dma_inb inb + +/* + * NOTES about DMA transfers: + * + * controller 1: channels 0-3, byte operations, ports 00-1F + * controller 2: channels 4-7, word operations, ports C0-DF + * + * - ALL registers are 8 bits only, regardless of transfer size + * - channel 4 is not used - cascades 1 into 2. + * - channels 0-3 are byte - addresses/counts are for physical bytes + * - channels 5-7 are word - addresses/counts are for physical words + * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries + * - transfer count loaded to registers is 1 less than actual count + * - controller 2 offsets are all even (2x offsets for controller 1) + * - page registers for 5-7 don't use data bit 0, represent 128K pages + * - page registers for 0-3 use bit 0, represent 64K pages + * + * DMA transfers are limited to the lower 16MB of _physical_ memory. + * Note that addresses loaded into registers must be _physical_ addresses, + * not logical addresses (which may differ if paging is active). + * + * Address mapping for channels 0-3: + * + * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses) + * | ... | | ... | | ... | + * | ... | | ... | | ... | + * | ... | | ... | | ... | + * P7 ... P0 A7 ... A0 A7 ... A0 + * | Page | Addr MSB | Addr LSB | (DMA registers) + * + * Address mapping for channels 5-7: + * + * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses) + * | ... | \ \ ... \ \ \ ... \ \ + * | ... | \ \ ... \ \ \ ... \ (not used) + * | ... | \ \ ... \ \ \ ... \ + * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0 + * | Page | Addr MSB | Addr LSB | (DMA registers) + * + * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses + * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at + * the hardware level, so odd-byte transfers aren't possible). + * + * Transfer count (_not # bytes_) is limited to 64K, represented as actual + * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more, + * and up to 128K bytes may be transferred on channels 5-7 in one operation. + * + */ + +#define MAX_DMA_CHANNELS 8 + +/* The maximum address that we can perform a DMA transfer to on this platform */ +#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x1000000) + +/* 8237 DMA controllers */ +#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */ +#define IO_DMA2_BASE 0xC0 /* 16 bit master DMA, ch 4(=slave input)..7 */ + +/* DMA controller registers */ +#define DMA1_CMD_REG 0x08 /* command register (w) */ +#define DMA1_STAT_REG 0x08 /* status register (r) */ +#define DMA1_REQ_REG 0x09 /* request register (w) */ +#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */ +#define DMA1_MODE_REG 0x0B /* mode register (w) */ +#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */ +#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */ +#define DMA1_RESET_REG 0x0D /* Master Clear (w) */ +#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */ +#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */ + +#define DMA2_CMD_REG 0xD0 /* command register (w) */ +#define DMA2_STAT_REG 0xD0 /* status register (r) */ +#define DMA2_REQ_REG 0xD2 /* request register (w) */ +#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */ +#define DMA2_MODE_REG 0xD6 /* mode register (w) */ +#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */ +#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */ +#define DMA2_RESET_REG 0xDA /* Master Clear (w) */ +#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */ +#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */ + +#define DMA_ADDR_0 0x00 /* DMA address registers */ +#define DMA_ADDR_1 0x02 +#define DMA_ADDR_2 0x04 +#define DMA_ADDR_3 0x06 +#define DMA_ADDR_4 0xC0 +#define DMA_ADDR_5 0xC4 +#define DMA_ADDR_6 0xC8 +#define DMA_ADDR_7 0xCC + +#define DMA_CNT_0 0x01 /* DMA count registers */ +#define DMA_CNT_1 0x03 +#define DMA_CNT_2 0x05 +#define DMA_CNT_3 0x07 +#define DMA_CNT_4 0xC2 +#define DMA_CNT_5 0xC6 +#define DMA_CNT_6 0xCA +#define DMA_CNT_7 0xCE + +#define DMA_PAGE_0 0x87 /* DMA page registers */ +#define DMA_PAGE_1 0x83 +#define DMA_PAGE_2 0x81 +#define DMA_PAGE_3 0x82 +#define DMA_PAGE_5 0x8B +#define DMA_PAGE_6 0x89 +#define DMA_PAGE_7 0x8A + +#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */ +#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */ +#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */ + +#define DMA_AUTOINIT 0x10 + + +extern spinlock_t dma_spin_lock; + +static __inline__ unsigned long claim_dma_lock(void) +{ + unsigned long flags; + spin_lock_irqsave(&dma_spin_lock, flags); + return flags; +} + +static __inline__ void release_dma_lock(unsigned long flags) +{ + spin_unlock_irqrestore(&dma_spin_lock, flags); +} + +/* enable/disable a specific DMA channel */ +static __inline__ void enable_dma(unsigned int dmanr) +{ + if (dmanr<=3) + dma_outb(dmanr, DMA1_MASK_REG); + else + dma_outb(dmanr & 3, DMA2_MASK_REG); +} + +static __inline__ void disable_dma(unsigned int dmanr) +{ + if (dmanr<=3) + dma_outb(dmanr | 4, DMA1_MASK_REG); + else + dma_outb((dmanr & 3) | 4, DMA2_MASK_REG); +} + +/* Clear the 'DMA Pointer Flip Flop'. + * Write 0 for LSB/MSB, 1 for MSB/LSB access. + * Use this once to initialize the FF to a known state. + * After that, keep track of it. :-) + * --- In order to do that, the DMA routines below should --- + * --- only be used while holding the DMA lock ! --- + */ +static __inline__ void clear_dma_ff(unsigned int dmanr) +{ + if (dmanr<=3) + dma_outb(0, DMA1_CLEAR_FF_REG); + else + dma_outb(0, DMA2_CLEAR_FF_REG); +} + +/* set mode (above) for a specific DMA channel */ +static __inline__ void set_dma_mode(unsigned int dmanr, char mode) +{ + if (dmanr<=3) + dma_outb(mode | dmanr, DMA1_MODE_REG); + else + dma_outb(mode | (dmanr&3), DMA2_MODE_REG); +} + +/* Set only the page register bits of the transfer address. + * This is used for successive transfers when we know the contents of + * the lower 16 bits of the DMA current address register, but a 64k boundary + * may have been crossed. + */ +static __inline__ void set_dma_page(unsigned int dmanr, char pagenr) +{ + switch(dmanr) { + case 0: + dma_outb(pagenr, DMA_PAGE_0); + break; + case 1: + dma_outb(pagenr, DMA_PAGE_1); + break; + case 2: + dma_outb(pagenr, DMA_PAGE_2); + break; + case 3: + dma_outb(pagenr, DMA_PAGE_3); + break; + case 5: + dma_outb(pagenr & 0xfe, DMA_PAGE_5); + break; + case 6: + dma_outb(pagenr & 0xfe, DMA_PAGE_6); + break; + case 7: + dma_outb(pagenr & 0xfe, DMA_PAGE_7); + break; + } +} + + +/* Set transfer address & page bits for specific DMA channel. + * Assumes dma flipflop is clear. + */ +static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) +{ + set_dma_page(dmanr, a>>16); + if (dmanr <= 3) { + dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); + dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); + } else { + dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); + dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); + } +} + + +/* Set transfer size (max 64k for DMA0..3, 128k for DMA5..7) for + * a specific DMA channel. + * You must ensure the parameters are valid. + * NOTE: from a manual: "the number of transfers is one more + * than the initial word count"! This is taken into account. + * Assumes dma flip-flop is clear. + * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. + */ +static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) +{ + count--; + if (dmanr <= 3) { + dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); + dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); + } else { + dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); + dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); + } +} + + +/* Get DMA residue count. After a DMA transfer, this + * should return zero. Reading this while a DMA transfer is + * still in progress will return unpredictable results. + * If called before the channel has been used, it may return 1. + * Otherwise, it returns the number of _bytes_ left to transfer. + * + * Assumes DMA flip-flop is clear. + */ +static __inline__ int get_dma_residue(unsigned int dmanr) +{ + unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE + : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE; + + /* using short to get 16-bit wrap around */ + unsigned short count; + + count = 1 + dma_inb(io_port); + count += dma_inb(io_port) << 8; + + return (dmanr<=3)? count : (count<<1); +} + + +/* These are in kernel/dma.c: */ +extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */ +extern void free_dma(unsigned int dmanr); /* release it again */ + +/* From PCI */ + +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy (0) +#endif + +#endif /* _ASM_DMA_H */ diff --git a/include/asm-i386/e820.h b/include/asm-i386/e820.h new file mode 100644 index 00000000000..5c285aee729 --- /dev/null +++ b/include/asm-i386/e820.h @@ -0,0 +1,40 @@ +/* + * structures and definitions for the int 15, ax=e820 memory map + * scheme. + * + * In a nutshell, arch/i386/boot/setup.S populates a scratch table + * in the empty_zero_block that contains a list of usable address/size + * duples. In arch/i386/kernel/setup.c, this information is + * transferred into the e820map, and in arch/i386/mm/init.c, that + * new information is used to mark pages reserved or not. + * + */ +#ifndef __E820_HEADER +#define __E820_HEADER + +#define E820MAP 0x2d0 /* our map */ +#define E820MAX 32 /* number of entries in E820MAP */ +#define E820NR 0x1e8 /* # entries in E820MAP */ + +#define E820_RAM 1 +#define E820_RESERVED 2 +#define E820_ACPI 3 /* usable as RAM once ACPI tables have been read */ +#define E820_NVS 4 + +#define HIGH_MEMORY (1024*1024) + +#ifndef __ASSEMBLY__ + +struct e820map { + int nr_map; + struct e820entry { + unsigned long long addr; /* start of memory segment */ + unsigned long long size; /* size of memory segment */ + unsigned long type; /* type of memory segment */ + } map[E820MAX]; +}; + +extern struct e820map e820; +#endif/*!__ASSEMBLY__*/ + +#endif/*__E820_HEADER*/ diff --git a/include/asm-i386/elf.h b/include/asm-i386/elf.h new file mode 100644 index 00000000000..130bdc8c68c --- /dev/null +++ b/include/asm-i386/elf.h @@ -0,0 +1,193 @@ +#ifndef __ASMi386_ELF_H +#define __ASMi386_ELF_H + +/* + * ELF register definitions.. + */ + +#include +#include +#include +#include /* for savesegment */ + +#include + +#define R_386_NONE 0 +#define R_386_32 1 +#define R_386_PC32 2 +#define R_386_GOT32 3 +#define R_386_PLT32 4 +#define R_386_COPY 5 +#define R_386_GLOB_DAT 6 +#define R_386_JMP_SLOT 7 +#define R_386_RELATIVE 8 +#define R_386_GOTOFF 9 +#define R_386_GOTPC 10 +#define R_386_NUM 11 + +typedef unsigned long elf_greg_t; + +#define ELF_NGREG (sizeof (struct user_regs_struct) / sizeof(elf_greg_t)) +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +typedef struct user_i387_struct elf_fpregset_t; +typedef struct user_fxsr_struct elf_fpxregset_t; + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) \ + (((x)->e_machine == EM_386) || ((x)->e_machine == EM_486)) + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS32 +#define ELF_DATA ELFDATA2LSB +#define ELF_ARCH EM_386 + +/* SVR4/i386 ABI (pages 3-31, 3-32) says that when the program starts %edx + contains a pointer to a function which might be registered using `atexit'. + This provides a mean for the dynamic linker to call DT_FINI functions for + shared libraries that have been loaded before the code runs. + + A value of 0 tells we have no such handler. + + We might as well make sure everything else is cleared too (except for %esp), + just to make things more deterministic. + */ +#define ELF_PLAT_INIT(_r, load_addr) do { \ + _r->ebx = 0; _r->ecx = 0; _r->edx = 0; \ + _r->esi = 0; _r->edi = 0; _r->ebp = 0; \ + _r->eax = 0; \ +} while (0) + +#define USE_ELF_CORE_DUMP +#define ELF_EXEC_PAGESIZE 4096 + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ + +#define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2) + +/* regs is struct pt_regs, pr_reg is elf_gregset_t (which is + now struct_user_regs, they are different) */ + +#define ELF_CORE_COPY_REGS(pr_reg, regs) \ + pr_reg[0] = regs->ebx; \ + pr_reg[1] = regs->ecx; \ + pr_reg[2] = regs->edx; \ + pr_reg[3] = regs->esi; \ + pr_reg[4] = regs->edi; \ + pr_reg[5] = regs->ebp; \ + pr_reg[6] = regs->eax; \ + pr_reg[7] = regs->xds; \ + pr_reg[8] = regs->xes; \ + savesegment(fs,pr_reg[9]); \ + savesegment(gs,pr_reg[10]); \ + pr_reg[11] = regs->orig_eax; \ + pr_reg[12] = regs->eip; \ + pr_reg[13] = regs->xcs; \ + pr_reg[14] = regs->eflags; \ + pr_reg[15] = regs->esp; \ + pr_reg[16] = regs->xss; + +/* This yields a mask that user programs can use to figure out what + instruction set this CPU supports. This could be done in user space, + but it's not easy, and we've already done it here. */ + +#define ELF_HWCAP (boot_cpu_data.x86_capability[0]) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. + + For the moment, we have only optimizations for the Intel generations, + but that could change... */ + +#define ELF_PLATFORM (system_utsname.machine) + +/* + * Architecture-neutral AT_ values in 0-17, leave some room + * for more of them, start the x86-specific ones at 32. + */ +#define AT_SYSINFO 32 +#define AT_SYSINFO_EHDR 33 + +#ifdef __KERNEL__ +#define SET_PERSONALITY(ex, ibcs2) do { } while (0) + +/* + * An executable for which elf_read_implies_exec() returns TRUE will + * have the READ_IMPLIES_EXEC personality flag set automatically. + */ +#define elf_read_implies_exec(ex, executable_stack) (executable_stack != EXSTACK_DISABLE_X) + +extern int dump_task_regs (struct task_struct *, elf_gregset_t *); +extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *); +extern int dump_task_extended_fpu (struct task_struct *, struct user_fxsr_struct *); + +#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs) +#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs) +#define ELF_CORE_COPY_XFPREGS(tsk, elf_xfpregs) dump_task_extended_fpu(tsk, elf_xfpregs) + +#define VSYSCALL_BASE (__fix_to_virt(FIX_VSYSCALL)) +#define VSYSCALL_EHDR ((const struct elfhdr *) VSYSCALL_BASE) +#define VSYSCALL_ENTRY ((unsigned long) &__kernel_vsyscall) +extern void __kernel_vsyscall; + +#define ARCH_DLINFO \ +do { \ + NEW_AUX_ENT(AT_SYSINFO, VSYSCALL_ENTRY); \ + NEW_AUX_ENT(AT_SYSINFO_EHDR, VSYSCALL_BASE); \ +} while (0) + +/* + * These macros parameterize elf_core_dump in fs/binfmt_elf.c to write out + * extra segments containing the vsyscall DSO contents. Dumping its + * contents makes post-mortem fully interpretable later without matching up + * the same kernel and hardware config to see what PC values meant. + * Dumping its extra ELF program headers includes all the other information + * a debugger needs to easily find how the vsyscall DSO was being used. + */ +#define ELF_CORE_EXTRA_PHDRS (VSYSCALL_EHDR->e_phnum) +#define ELF_CORE_WRITE_EXTRA_PHDRS \ +do { \ + const struct elf_phdr *const vsyscall_phdrs = \ + (const struct elf_phdr *) (VSYSCALL_BASE \ + + VSYSCALL_EHDR->e_phoff); \ + int i; \ + Elf32_Off ofs = 0; \ + for (i = 0; i < VSYSCALL_EHDR->e_phnum; ++i) { \ + struct elf_phdr phdr = vsyscall_phdrs[i]; \ + if (phdr.p_type == PT_LOAD) { \ + BUG_ON(ofs != 0); \ + ofs = phdr.p_offset = offset; \ + phdr.p_memsz = PAGE_ALIGN(phdr.p_memsz); \ + phdr.p_filesz = phdr.p_memsz; \ + offset += phdr.p_filesz; \ + } \ + else \ + phdr.p_offset += ofs; \ + phdr.p_paddr = 0; /* match other core phdrs */ \ + DUMP_WRITE(&phdr, sizeof(phdr)); \ + } \ +} while (0) +#define ELF_CORE_WRITE_EXTRA_DATA \ +do { \ + const struct elf_phdr *const vsyscall_phdrs = \ + (const struct elf_phdr *) (VSYSCALL_BASE \ + + VSYSCALL_EHDR->e_phoff); \ + int i; \ + for (i = 0; i < VSYSCALL_EHDR->e_phnum; ++i) { \ + if (vsyscall_phdrs[i].p_type == PT_LOAD) \ + DUMP_WRITE((void *) vsyscall_phdrs[i].p_vaddr, \ + PAGE_ALIGN(vsyscall_phdrs[i].p_memsz)); \ + } \ +} while (0) + +#endif + +#endif diff --git a/include/asm-i386/errno.h b/include/asm-i386/errno.h new file mode 100644 index 00000000000..969b3437472 --- /dev/null +++ b/include/asm-i386/errno.h @@ -0,0 +1,6 @@ +#ifndef _I386_ERRNO_H +#define _I386_ERRNO_H + +#include + +#endif diff --git a/include/asm-i386/fcntl.h b/include/asm-i386/fcntl.h new file mode 100644 index 00000000000..511cde94a3e --- /dev/null +++ b/include/asm-i386/fcntl.h @@ -0,0 +1,88 @@ +#ifndef _I386_FCNTL_H +#define _I386_FCNTL_H + +/* open/fcntl - O_SYNC is only implemented on blocks devices and on files + located on an ext2 file system */ +#define O_ACCMODE 0003 +#define O_RDONLY 00 +#define O_WRONLY 01 +#define O_RDWR 02 +#define O_CREAT 0100 /* not fcntl */ +#define O_EXCL 0200 /* not fcntl */ +#define O_NOCTTY 0400 /* not fcntl */ +#define O_TRUNC 01000 /* not fcntl */ +#define O_APPEND 02000 +#define O_NONBLOCK 04000 +#define O_NDELAY O_NONBLOCK +#define O_SYNC 010000 +#define FASYNC 020000 /* fcntl, for BSD compatibility */ +#define O_DIRECT 040000 /* direct disk access hint */ +#define O_LARGEFILE 0100000 +#define O_DIRECTORY 0200000 /* must be a directory */ +#define O_NOFOLLOW 0400000 /* don't follow links */ +#define O_NOATIME 01000000 + +#define F_DUPFD 0 /* dup */ +#define F_GETFD 1 /* get close_on_exec */ +#define F_SETFD 2 /* set/clear close_on_exec */ +#define F_GETFL 3 /* get file->f_flags */ +#define F_SETFL 4 /* set file->f_flags */ +#define F_GETLK 5 +#define F_SETLK 6 +#define F_SETLKW 7 + +#define F_SETOWN 8 /* for sockets. */ +#define F_GETOWN 9 /* for sockets. */ +#define F_SETSIG 10 /* for sockets. */ +#define F_GETSIG 11 /* for sockets. */ + +#define F_GETLK64 12 /* using 'struct flock64' */ +#define F_SETLK64 13 +#define F_SETLKW64 14 + +/* for F_[GET|SET]FL */ +#define FD_CLOEXEC 1 /* actually anything with low bit set goes */ + +/* for posix fcntl() and lockf() */ +#define F_RDLCK 0 +#define F_WRLCK 1 +#define F_UNLCK 2 + +/* for old implementation of bsd flock () */ +#define F_EXLCK 4 /* or 3 */ +#define F_SHLCK 8 /* or 4 */ + +/* for leases */ +#define F_INPROGRESS 16 + +/* operations for bsd flock(), also used by the kernel implementation */ +#define LOCK_SH 1 /* shared lock */ +#define LOCK_EX 2 /* exclusive lock */ +#define LOCK_NB 4 /* or'd with one of the above to prevent + blocking */ +#define LOCK_UN 8 /* remove lock */ + +#define LOCK_MAND 32 /* This is a mandatory flock */ +#define LOCK_READ 64 /* ... Which allows concurrent read operations */ +#define LOCK_WRITE 128 /* ... Which allows concurrent write operations */ +#define LOCK_RW 192 /* ... Which allows concurrent read & write ops */ + +struct flock { + short l_type; + short l_whence; + off_t l_start; + off_t l_len; + pid_t l_pid; +}; + +struct flock64 { + short l_type; + short l_whence; + loff_t l_start; + loff_t l_len; + pid_t l_pid; +}; + +#define F_LINUX_SPECIFIC_BASE 1024 + +#endif diff --git a/include/asm-i386/fixmap.h b/include/asm-i386/fixmap.h new file mode 100644 index 00000000000..c94cac95838 --- /dev/null +++ b/include/asm-i386/fixmap.h @@ -0,0 +1,158 @@ +/* + * fixmap.h: compile-time virtual memory allocation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998 Ingo Molnar + * + * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999 + */ + +#ifndef _ASM_FIXMAP_H +#define _ASM_FIXMAP_H + +#include + +/* used by vmalloc.c, vsyscall.lds.S. + * + * Leave one empty page between vmalloc'ed areas and + * the start of the fixmap. + */ +#define __FIXADDR_TOP 0xfffff000 + +#ifndef __ASSEMBLY__ +#include +#include +#include +#include +#ifdef CONFIG_HIGHMEM +#include +#include +#endif + +/* + * Here we define all the compile-time 'special' virtual + * addresses. The point is to have a constant address at + * compile time, but to set the physical address only + * in the boot process. We allocate these special addresses + * from the end of virtual memory (0xfffff000) backwards. + * Also this lets us do fail-safe vmalloc(), we + * can guarantee that these special addresses and + * vmalloc()-ed addresses never overlap. + * + * these 'compile-time allocated' memory buffers are + * fixed-size 4k pages. (or larger if used with an increment + * highger than 1) use fixmap_set(idx,phys) to associate + * physical memory with fixmap indices. + * + * TLB entries of such buffers will not be flushed across + * task switches. + */ +enum fixed_addresses { + FIX_HOLE, + FIX_VSYSCALL, +#ifdef CONFIG_X86_LOCAL_APIC + FIX_APIC_BASE, /* local (CPU) APIC) -- required for SMP or not */ +#endif +#ifdef CONFIG_X86_IO_APIC + FIX_IO_APIC_BASE_0, + FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS-1, +#endif +#ifdef CONFIG_X86_VISWS_APIC + FIX_CO_CPU, /* Cobalt timer */ + FIX_CO_APIC, /* Cobalt APIC Redirection Table */ + FIX_LI_PCIA, /* Lithium PCI Bridge A */ + FIX_LI_PCIB, /* Lithium PCI Bridge B */ +#endif +#ifdef CONFIG_X86_F00F_BUG + FIX_F00F_IDT, /* Virtual mapping for IDT */ +#endif +#ifdef CONFIG_X86_CYCLONE_TIMER + FIX_CYCLONE_TIMER, /*cyclone timer register*/ +#endif +#ifdef CONFIG_HIGHMEM + FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */ + FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, +#endif +#ifdef CONFIG_ACPI_BOOT + FIX_ACPI_BEGIN, + FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1, +#endif +#ifdef CONFIG_PCI_MMCONFIG + FIX_PCIE_MCFG, +#endif + __end_of_permanent_fixed_addresses, + /* temporary boot-time mappings, used before ioremap() is functional */ +#define NR_FIX_BTMAPS 16 + FIX_BTMAP_END = __end_of_permanent_fixed_addresses, + FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS - 1, + FIX_WP_TEST, + __end_of_fixed_addresses +}; + +extern void __set_fixmap (enum fixed_addresses idx, + unsigned long phys, pgprot_t flags); + +#define set_fixmap(idx, phys) \ + __set_fixmap(idx, phys, PAGE_KERNEL) +/* + * Some hardware wants to get fixmapped without caching. + */ +#define set_fixmap_nocache(idx, phys) \ + __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE) + +#define clear_fixmap(idx) \ + __set_fixmap(idx, 0, __pgprot(0)) + +#define FIXADDR_TOP ((unsigned long)__FIXADDR_TOP) + +#define __FIXADDR_SIZE (__end_of_permanent_fixed_addresses << PAGE_SHIFT) +#define __FIXADDR_BOOT_SIZE (__end_of_fixed_addresses << PAGE_SHIFT) +#define FIXADDR_START (FIXADDR_TOP - __FIXADDR_SIZE) +#define FIXADDR_BOOT_START (FIXADDR_TOP - __FIXADDR_BOOT_SIZE) + +#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT)) +#define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT) + +/* + * This is the range that is readable by user mode, and things + * acting like user mode such as get_user_pages. + */ +#define FIXADDR_USER_START (__fix_to_virt(FIX_VSYSCALL)) +#define FIXADDR_USER_END (FIXADDR_USER_START + PAGE_SIZE) + + +extern void __this_fixmap_does_not_exist(void); + +/* + * 'index to address' translation. If anyone tries to use the idx + * directly without tranlation, we catch the bug with a NULL-deference + * kernel oops. Illegal ranges of incoming indices are caught too. + */ +static __always_inline unsigned long fix_to_virt(const unsigned int idx) +{ + /* + * this branch gets completely eliminated after inlining, + * except when someone tries to use fixaddr indices in an + * illegal way. (such as mixing up address types or using + * out-of-range indices). + * + * If it doesn't get removed, the linker will complain + * loudly with a reasonably clear error message.. + */ + if (idx >= __end_of_fixed_addresses) + __this_fixmap_does_not_exist(); + + return __fix_to_virt(idx); +} + +static inline unsigned long virt_to_fix(const unsigned long vaddr) +{ + BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START); + return __virt_to_fix(vaddr); +} + +#endif /* !__ASSEMBLY__ */ +#endif diff --git a/include/asm-i386/floppy.h b/include/asm-i386/floppy.h new file mode 100644 index 00000000000..f4782284807 --- /dev/null +++ b/include/asm-i386/floppy.h @@ -0,0 +1,319 @@ +/* + * Architecture specific parts of the Floppy driver + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995 + */ +#ifndef __ASM_I386_FLOPPY_H +#define __ASM_I386_FLOPPY_H + +#include + + +/* + * The DMA channel used by the floppy controller cannot access data at + * addresses >= 16MB + * + * Went back to the 1MB limit, as some people had problems with the floppy + * driver otherwise. It doesn't matter much for performance anyway, as most + * floppy accesses go through the track buffer. + */ +#define _CROSS_64KB(a,s,vdma) \ +(!(vdma) && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64)) + +#define CROSS_64KB(a,s) _CROSS_64KB(a,s,use_virtual_dma & 1) + + +#define SW fd_routine[use_virtual_dma&1] +#define CSW fd_routine[can_use_virtual_dma & 1] + + +#define fd_inb(port) inb_p(port) +#define fd_outb(value,port) outb_p(value,port) + +#define fd_request_dma() CSW._request_dma(FLOPPY_DMA,"floppy") +#define fd_free_dma() CSW._free_dma(FLOPPY_DMA) +#define fd_enable_irq() enable_irq(FLOPPY_IRQ) +#define fd_disable_irq() disable_irq(FLOPPY_IRQ) +#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL) +#define fd_get_dma_residue() SW._get_dma_residue(FLOPPY_DMA) +#define fd_dma_mem_alloc(size) SW._dma_mem_alloc(size) +#define fd_dma_setup(addr, size, mode, io) SW._dma_setup(addr, size, mode, io) + +#define FLOPPY_CAN_FALLBACK_ON_NODMA + +static int virtual_dma_count; +static int virtual_dma_residue; +static char *virtual_dma_addr; +static int virtual_dma_mode; +static int doing_pdma; + +static irqreturn_t floppy_hardint(int irq, void *dev_id, struct pt_regs * regs) +{ + register unsigned char st; + +#undef TRACE_FLPY_INT +#define NO_FLOPPY_ASSEMBLER + +#ifdef TRACE_FLPY_INT + static int calls=0; + static int bytes=0; + static int dma_wait=0; +#endif + if (!doing_pdma) + return floppy_interrupt(irq, dev_id, regs); + +#ifdef TRACE_FLPY_INT + if(!calls) + bytes = virtual_dma_count; +#endif + +#ifndef NO_FLOPPY_ASSEMBLER + __asm__ ( + "testl %1,%1" + "je 3f" +"1: inb %w4,%b0" + "andb $160,%b0" + "cmpb $160,%b0" + "jne 2f" + "incw %w4" + "testl %3,%3" + "jne 4f" + "inb %w4,%b0" + "movb %0,(%2)" + "jmp 5f" +"4: movb (%2),%0" + "outb %b0,%w4" +"5: decw %w4" + "outb %0,$0x80" + "decl %1" + "incl %2" + "testl %1,%1" + "jne 1b" +"3: inb %w4,%b0" +"2: " + : "=a" ((char) st), + "=c" ((long) virtual_dma_count), + "=S" ((long) virtual_dma_addr) + : "b" ((long) virtual_dma_mode), + "d" ((short) virtual_dma_port+4), + "1" ((long) virtual_dma_count), + "2" ((long) virtual_dma_addr)); +#else + { + register int lcount; + register char *lptr; + + st = 1; + for(lcount=virtual_dma_count, lptr=virtual_dma_addr; + lcount; lcount--, lptr++) { + st=inb(virtual_dma_port+4) & 0xa0 ; + if(st != 0xa0) + break; + if(virtual_dma_mode) + outb_p(*lptr, virtual_dma_port+5); + else + *lptr = inb_p(virtual_dma_port+5); + } + virtual_dma_count = lcount; + virtual_dma_addr = lptr; + st = inb(virtual_dma_port+4); + } +#endif + +#ifdef TRACE_FLPY_INT + calls++; +#endif + if(st == 0x20) + return IRQ_HANDLED; + if(!(st & 0x20)) { + virtual_dma_residue += virtual_dma_count; + virtual_dma_count=0; +#ifdef TRACE_FLPY_INT + printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n", + virtual_dma_count, virtual_dma_residue, calls, bytes, + dma_wait); + calls = 0; + dma_wait=0; +#endif + doing_pdma = 0; + floppy_interrupt(irq, dev_id, regs); + return IRQ_HANDLED; + } +#ifdef TRACE_FLPY_INT + if(!virtual_dma_count) + dma_wait++; +#endif + return IRQ_HANDLED; +} + +static void fd_disable_dma(void) +{ + if(! (can_use_virtual_dma & 1)) + disable_dma(FLOPPY_DMA); + doing_pdma = 0; + virtual_dma_residue += virtual_dma_count; + virtual_dma_count=0; +} + +static int vdma_request_dma(unsigned int dmanr, const char * device_id) +{ + return 0; +} + +static void vdma_nop(unsigned int dummy) +{ +} + + +static int vdma_get_dma_residue(unsigned int dummy) +{ + return virtual_dma_count + virtual_dma_residue; +} + + +static int fd_request_irq(void) +{ + if(can_use_virtual_dma) + return request_irq(FLOPPY_IRQ, floppy_hardint,SA_INTERRUPT, + "floppy", NULL); + else + return request_irq(FLOPPY_IRQ, floppy_interrupt, + SA_INTERRUPT|SA_SAMPLE_RANDOM, + "floppy", NULL); + +} + +static unsigned long dma_mem_alloc(unsigned long size) +{ + return __get_dma_pages(GFP_KERNEL,get_order(size)); +} + + +static unsigned long vdma_mem_alloc(unsigned long size) +{ + return (unsigned long) vmalloc(size); + +} + +#define nodma_mem_alloc(size) vdma_mem_alloc(size) + +static void _fd_dma_mem_free(unsigned long addr, unsigned long size) +{ + if((unsigned int) addr >= (unsigned int) high_memory) + vfree((void *)addr); + else + free_pages(addr, get_order(size)); +} + +#define fd_dma_mem_free(addr, size) _fd_dma_mem_free(addr, size) + +static void _fd_chose_dma_mode(char *addr, unsigned long size) +{ + if(can_use_virtual_dma == 2) { + if((unsigned int) addr >= (unsigned int) high_memory || + isa_virt_to_bus(addr) >= 0x1000000 || + _CROSS_64KB(addr, size, 0)) + use_virtual_dma = 1; + else + use_virtual_dma = 0; + } else { + use_virtual_dma = can_use_virtual_dma & 1; + } +} + +#define fd_chose_dma_mode(addr, size) _fd_chose_dma_mode(addr, size) + + +static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io) +{ + doing_pdma = 1; + virtual_dma_port = io; + virtual_dma_mode = (mode == DMA_MODE_WRITE); + virtual_dma_addr = addr; + virtual_dma_count = size; + virtual_dma_residue = 0; + return 0; +} + +static int hard_dma_setup(char *addr, unsigned long size, int mode, int io) +{ +#ifdef FLOPPY_SANITY_CHECK + if (CROSS_64KB(addr, size)) { + printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size); + return -1; + } +#endif + /* actual, physical DMA */ + doing_pdma = 0; + clear_dma_ff(FLOPPY_DMA); + set_dma_mode(FLOPPY_DMA,mode); + set_dma_addr(FLOPPY_DMA,isa_virt_to_bus(addr)); + set_dma_count(FLOPPY_DMA,size); + enable_dma(FLOPPY_DMA); + return 0; +} + +struct fd_routine_l { + int (*_request_dma)(unsigned int dmanr, const char * device_id); + void (*_free_dma)(unsigned int dmanr); + int (*_get_dma_residue)(unsigned int dummy); + unsigned long (*_dma_mem_alloc) (unsigned long size); + int (*_dma_setup)(char *addr, unsigned long size, int mode, int io); +} fd_routine[] = { + { + request_dma, + free_dma, + get_dma_residue, + dma_mem_alloc, + hard_dma_setup + }, + { + vdma_request_dma, + vdma_nop, + vdma_get_dma_residue, + vdma_mem_alloc, + vdma_dma_setup + } +}; + + +static int FDC1 = 0x3f0; +static int FDC2 = -1; + +/* + * Floppy types are stored in the rtc's CMOS RAM and so rtc_lock + * is needed to prevent corrupted CMOS RAM in case "insmod floppy" + * coincides with another rtc CMOS user. Paul G. + */ +#define FLOPPY0_TYPE ({ \ + unsigned long flags; \ + unsigned char val; \ + spin_lock_irqsave(&rtc_lock, flags); \ + val = (CMOS_READ(0x10) >> 4) & 15; \ + spin_unlock_irqrestore(&rtc_lock, flags); \ + val; \ +}) + +#define FLOPPY1_TYPE ({ \ + unsigned long flags; \ + unsigned char val; \ + spin_lock_irqsave(&rtc_lock, flags); \ + val = CMOS_READ(0x10) & 15; \ + spin_unlock_irqrestore(&rtc_lock, flags); \ + val; \ +}) + +#define N_FDC 2 +#define N_DRIVE 8 + +#define FLOPPY_MOTOR_MASK 0xf0 + +#define AUTO_DMA + +#define EXTRA_FLOPPY_PARAMS + +#endif /* __ASM_I386_FLOPPY_H */ diff --git a/include/asm-i386/genapic.h b/include/asm-i386/genapic.h new file mode 100644 index 00000000000..fc813b2e827 --- /dev/null +++ b/include/asm-i386/genapic.h @@ -0,0 +1,115 @@ +#ifndef _ASM_GENAPIC_H +#define _ASM_GENAPIC_H 1 + +/* + * Generic APIC driver interface. + * + * An straight forward mapping of the APIC related parts of the + * x86 subarchitecture interface to a dynamic object. + * + * This is used by the "generic" x86 subarchitecture. + * + * Copyright 2003 Andi Kleen, SuSE Labs. + */ + +struct mpc_config_translation; +struct mpc_config_bus; +struct mp_config_table; +struct mpc_config_processor; + +struct genapic { + char *name; + int (*probe)(void); + + int (*apic_id_registered)(void); + cpumask_t (*target_cpus)(void); + int int_delivery_mode; + int int_dest_mode; + int ESR_DISABLE; + int apic_destination_logical; + unsigned long (*check_apicid_used)(physid_mask_t bitmap, int apicid); + unsigned long (*check_apicid_present)(int apicid); + int no_balance_irq; + int no_ioapic_check; + void (*init_apic_ldr)(void); + physid_mask_t (*ioapic_phys_id_map)(physid_mask_t map); + + void (*clustered_apic_check)(void); + int (*multi_timer_check)(int apic, int irq); + int (*apicid_to_node)(int logical_apicid); + int (*cpu_to_logical_apicid)(int cpu); + int (*cpu_present_to_apicid)(int mps_cpu); + physid_mask_t (*apicid_to_cpu_present)(int phys_apicid); + int (*mpc_apic_id)(struct mpc_config_processor *m, + struct mpc_config_translation *t); + void (*setup_portio_remap)(void); + int (*check_phys_apicid_present)(int boot_cpu_physical_apicid); + void (*enable_apic_mode)(void); + u32 (*phys_pkg_id)(u32 cpuid_apic, int index_msb); + + /* mpparse */ + void (*mpc_oem_bus_info)(struct mpc_config_bus *, char *, + struct mpc_config_translation *); + void (*mpc_oem_pci_bus)(struct mpc_config_bus *, + struct mpc_config_translation *); + + /* When one of the next two hooks returns 1 the genapic + is switched to this. Essentially they are additional probe + functions. */ + int (*mps_oem_check)(struct mp_config_table *mpc, char *oem, + char *productid); + int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id); + + unsigned (*get_apic_id)(unsigned long x); + unsigned long apic_id_mask; + unsigned int (*cpu_mask_to_apicid)(cpumask_t cpumask); + + /* ipi */ + void (*send_IPI_mask)(cpumask_t mask, int vector); + void (*send_IPI_allbutself)(int vector); + void (*send_IPI_all)(int vector); +}; + +#define APICFUNC(x) .x = x + +#define APIC_INIT(aname, aprobe) { \ + .name = aname, \ + .probe = aprobe, \ + .int_delivery_mode = INT_DELIVERY_MODE, \ + .int_dest_mode = INT_DEST_MODE, \ + .no_balance_irq = NO_BALANCE_IRQ, \ + .no_ioapic_check = NO_IOAPIC_CHECK, \ + .ESR_DISABLE = esr_disable, \ + .apic_destination_logical = APIC_DEST_LOGICAL, \ + APICFUNC(apic_id_registered), \ + APICFUNC(target_cpus), \ + APICFUNC(check_apicid_used), \ + APICFUNC(check_apicid_present), \ + APICFUNC(init_apic_ldr), \ + APICFUNC(ioapic_phys_id_map), \ + APICFUNC(clustered_apic_check), \ + APICFUNC(multi_timer_check), \ + APICFUNC(apicid_to_node), \ + APICFUNC(cpu_to_logical_apicid), \ + APICFUNC(cpu_present_to_apicid), \ + APICFUNC(apicid_to_cpu_present), \ + APICFUNC(mpc_apic_id), \ + APICFUNC(setup_portio_remap), \ + APICFUNC(check_phys_apicid_present), \ + APICFUNC(mpc_oem_bus_info), \ + APICFUNC(mpc_oem_pci_bus), \ + APICFUNC(mps_oem_check), \ + APICFUNC(get_apic_id), \ + .apic_id_mask = APIC_ID_MASK, \ + APICFUNC(cpu_mask_to_apicid), \ + APICFUNC(acpi_madt_oem_check), \ + APICFUNC(send_IPI_mask), \ + APICFUNC(send_IPI_allbutself), \ + APICFUNC(send_IPI_all), \ + APICFUNC(enable_apic_mode), \ + APICFUNC(phys_pkg_id), \ + } + +extern struct genapic *genapic; + +#endif diff --git a/include/asm-i386/hardirq.h b/include/asm-i386/hardirq.h new file mode 100644 index 00000000000..ee754d35973 --- /dev/null +++ b/include/asm-i386/hardirq.h @@ -0,0 +1,24 @@ +#ifndef __ASM_HARDIRQ_H +#define __ASM_HARDIRQ_H + +#include +#include +#include + +typedef struct { + unsigned int __softirq_pending; + unsigned long idle_timestamp; + unsigned int __nmi_count; /* arch dependent */ + unsigned int apic_timer_irqs; /* arch dependent */ +} ____cacheline_aligned irq_cpustat_t; + +DECLARE_PER_CPU(irq_cpustat_t, irq_stat); +extern irq_cpustat_t irq_stat[]; + +#define __ARCH_IRQ_STAT +#define __IRQ_STAT(cpu, member) (per_cpu(irq_stat, cpu).member) + +void ack_bad_irq(unsigned int irq); +#include + +#endif /* __ASM_HARDIRQ_H */ diff --git a/include/asm-i386/hdreg.h b/include/asm-i386/hdreg.h new file mode 100644 index 00000000000..5989bbc97cb --- /dev/null +++ b/include/asm-i386/hdreg.h @@ -0,0 +1 @@ +#warning this file is obsolete, please do not use it diff --git a/include/asm-i386/highmem.h b/include/asm-i386/highmem.h new file mode 100644 index 00000000000..1df42bf347d --- /dev/null +++ b/include/asm-i386/highmem.h @@ -0,0 +1,79 @@ +/* + * highmem.h: virtual kernel memory mappings for high memory + * + * Used in CONFIG_HIGHMEM systems for memory pages which + * are not addressable by direct kernel virtual addresses. + * + * Copyright (C) 1999 Gerhard Wichert, Siemens AG + * Gerhard.Wichert@pdb.siemens.de + * + * + * Redesigned the x86 32-bit VM architecture to deal with + * up to 16 Terabyte physical memory. With current x86 CPUs + * we now support up to 64 Gigabytes physical RAM. + * + * Copyright (C) 1999 Ingo Molnar + */ + +#ifndef _ASM_HIGHMEM_H +#define _ASM_HIGHMEM_H + +#ifdef __KERNEL__ + +#include +#include +#include +#include +#include + +/* declarations for highmem.c */ +extern unsigned long highstart_pfn, highend_pfn; + +extern pte_t *kmap_pte; +extern pgprot_t kmap_prot; +extern pte_t *pkmap_page_table; + +/* + * Right now we initialize only a single pte table. It can be extended + * easily, subsequent pte tables have to be allocated in one physical + * chunk of RAM. + */ +#ifdef CONFIG_X86_PAE +#define LAST_PKMAP 512 +#else +#define LAST_PKMAP 1024 +#endif +/* + * Ordering is: + * + * FIXADDR_TOP + * fixed_addresses + * FIXADDR_START + * temp fixed addresses + * FIXADDR_BOOT_START + * Persistent kmap area + * PKMAP_BASE + * VMALLOC_END + * Vmalloc area + * VMALLOC_START + * high_memory + */ +#define PKMAP_BASE ( (FIXADDR_BOOT_START - PAGE_SIZE*(LAST_PKMAP + 1)) & PMD_MASK ) +#define LAST_PKMAP_MASK (LAST_PKMAP-1) +#define PKMAP_NR(virt) ((virt-PKMAP_BASE) >> PAGE_SHIFT) +#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) + +extern void * FASTCALL(kmap_high(struct page *page)); +extern void FASTCALL(kunmap_high(struct page *page)); + +void *kmap(struct page *page); +void kunmap(struct page *page); +void *kmap_atomic(struct page *page, enum km_type type); +void kunmap_atomic(void *kvaddr, enum km_type type); +struct page *kmap_atomic_to_page(void *ptr); + +#define flush_cache_kmaps() do { } while (0) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_HIGHMEM_H */ diff --git a/include/asm-i386/hpet.h b/include/asm-i386/hpet.h new file mode 100644 index 00000000000..6e20b079f1d --- /dev/null +++ b/include/asm-i386/hpet.h @@ -0,0 +1,113 @@ + +#ifndef _I386_HPET_H +#define _I386_HPET_H + +#ifdef CONFIG_HPET_TIMER + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +/* + * Documentation on HPET can be found at: + * http://www.intel.com/ial/home/sp/pcmmspec.htm + * ftp://download.intel.com/ial/home/sp/mmts098.pdf + */ + +#define HPET_MMAP_SIZE 1024 + +#define HPET_ID 0x000 +#define HPET_PERIOD 0x004 +#define HPET_CFG 0x010 +#define HPET_STATUS 0x020 +#define HPET_COUNTER 0x0f0 +#define HPET_T0_CFG 0x100 +#define HPET_T0_CMP 0x108 +#define HPET_T0_ROUTE 0x110 +#define HPET_T1_CFG 0x120 +#define HPET_T1_CMP 0x128 +#define HPET_T1_ROUTE 0x130 +#define HPET_T2_CFG 0x140 +#define HPET_T2_CMP 0x148 +#define HPET_T2_ROUTE 0x150 + +#define HPET_ID_LEGSUP 0x00008000 +#define HPET_ID_NUMBER 0x00001f00 +#define HPET_ID_REV 0x000000ff +#define HPET_ID_NUMBER_SHIFT 8 + +#define HPET_CFG_ENABLE 0x001 +#define HPET_CFG_LEGACY 0x002 +#define HPET_LEGACY_8254 2 +#define HPET_LEGACY_RTC 8 + +#define HPET_TN_ENABLE 0x004 +#define HPET_TN_PERIODIC 0x008 +#define HPET_TN_PERIODIC_CAP 0x010 +#define HPET_TN_SETVAL 0x040 +#define HPET_TN_32BIT 0x100 + +/* Use our own asm for 64 bit multiply/divide */ +#define ASM_MUL64_REG(eax_out,edx_out,reg_in,eax_in) \ + __asm__ __volatile__("mull %2" \ + :"=a" (eax_out), "=d" (edx_out) \ + :"r" (reg_in), "0" (eax_in)) + +#define ASM_DIV64_REG(eax_out,edx_out,reg_in,eax_in,edx_in) \ + __asm__ __volatile__("divl %2" \ + :"=a" (eax_out), "=d" (edx_out) \ + :"r" (reg_in), "0" (eax_in), "1" (edx_in)) + +#define KERNEL_TICK_USEC (1000000UL/HZ) /* tick value in microsec */ +/* Max HPET Period is 10^8 femto sec as in HPET spec */ +#define HPET_MAX_PERIOD (100000000UL) +/* + * Min HPET period is 10^5 femto sec just for safety. If it is less than this, + * then 32 bit HPET counter wrapsaround in less than 0.5 sec. + */ +#define HPET_MIN_PERIOD (100000UL) + +extern unsigned long hpet_tick; /* hpet clks count per tick */ +extern unsigned long hpet_address; /* hpet memory map physical address */ + +extern int hpet_rtc_timer_init(void); +extern int hpet_enable(void); +extern int hpet_reenable(void); +extern int is_hpet_enabled(void); +extern int is_hpet_capable(void); +extern int hpet_readl(unsigned long a); + +#ifdef CONFIG_HPET_EMULATE_RTC +extern int hpet_mask_rtc_irq_bit(unsigned long bit_mask); +extern int hpet_set_rtc_irq_bit(unsigned long bit_mask); +extern int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec); +extern int hpet_set_periodic_freq(unsigned long freq); +extern int hpet_rtc_dropped_irq(void); +extern int hpet_rtc_timer_init(void); +extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs); +#endif /* CONFIG_HPET_EMULATE_RTC */ +#endif /* CONFIG_HPET_TIMER */ +#endif /* _I386_HPET_H */ diff --git a/include/asm-i386/hw_irq.h b/include/asm-i386/hw_irq.h new file mode 100644 index 00000000000..4ac84cc6f01 --- /dev/null +++ b/include/asm-i386/hw_irq.h @@ -0,0 +1,79 @@ +#ifndef _ASM_HW_IRQ_H +#define _ASM_HW_IRQ_H + +/* + * linux/include/asm/hw_irq.h + * + * (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar + * + * moved some of the old arch/i386/kernel/irq.h to here. VY + * + * IRQ/IPI changes taken from work by Thomas Radke + * + */ + +#include +#include +#include +#include +#include + +/* + * Various low-level irq details needed by irq.c, process.c, + * time.c, io_apic.c and smp.c + * + * Interrupt entry/exit code at both C and assembly level + */ + +extern u8 irq_vector[NR_IRQ_VECTORS]; +#define IO_APIC_VECTOR(irq) (irq_vector[irq]) +#define AUTO_ASSIGN -1 + +extern void (*interrupt[NR_IRQS])(void); + +#ifdef CONFIG_SMP +fastcall void reschedule_interrupt(void); +fastcall void invalidate_interrupt(void); +fastcall void call_function_interrupt(void); +#endif + +#ifdef CONFIG_X86_LOCAL_APIC +fastcall void apic_timer_interrupt(void); +fastcall void error_interrupt(void); +fastcall void spurious_interrupt(void); +fastcall void thermal_interrupt(struct pt_regs *); +#define platform_legacy_irq(irq) ((irq) < 16) +#endif + +void disable_8259A_irq(unsigned int irq); +void enable_8259A_irq(unsigned int irq); +int i8259A_irq_pending(unsigned int irq); +void make_8259A_irq(unsigned int irq); +void init_8259A(int aeoi); +void FASTCALL(send_IPI_self(int vector)); +void init_VISWS_APIC_irqs(void); +void setup_IO_APIC(void); +void disable_IO_APIC(void); +void print_IO_APIC(void); +int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn); +void send_IPI(int dest, int vector); +void setup_ioapic_dest(void); + +extern unsigned long io_apic_irqs; + +extern atomic_t irq_err_count; +extern atomic_t irq_mis_count; + +#define IO_APIC_IRQ(x) (((x) >= 16) || ((1<<(x)) & io_apic_irqs)) + +#if defined(CONFIG_X86_IO_APIC) +static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i) +{ + if (IO_APIC_IRQ(i)) + send_IPI_self(IO_APIC_VECTOR(i)); +} +#else +static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i) {} +#endif + +#endif /* _ASM_HW_IRQ_H */ diff --git a/include/asm-i386/i387.h b/include/asm-i386/i387.h new file mode 100644 index 00000000000..f6feb98a939 --- /dev/null +++ b/include/asm-i386/i387.h @@ -0,0 +1,115 @@ +/* + * include/asm-i386/i387.h + * + * Copyright (C) 1994 Linus Torvalds + * + * Pentium III FXSR, SSE support + * General FPU state handling cleanups + * Gareth Hughes , May 2000 + */ + +#ifndef __ASM_I386_I387_H +#define __ASM_I386_I387_H + +#include +#include +#include +#include +#include + +extern void mxcsr_feature_mask_init(void); +extern void init_fpu(struct task_struct *); +/* + * FPU lazy state save handling... + */ +extern void restore_fpu( struct task_struct *tsk ); + +extern void kernel_fpu_begin(void); +#define kernel_fpu_end() do { stts(); preempt_enable(); } while(0) + +/* + * These must be called with preempt disabled + */ +static inline void __save_init_fpu( struct task_struct *tsk ) +{ + if ( cpu_has_fxsr ) { + asm volatile( "fxsave %0 ; fnclex" + : "=m" (tsk->thread.i387.fxsave) ); + } else { + asm volatile( "fnsave %0 ; fwait" + : "=m" (tsk->thread.i387.fsave) ); + } + tsk->thread_info->status &= ~TS_USEDFPU; +} + +#define __unlazy_fpu( tsk ) do { \ + if ((tsk)->thread_info->status & TS_USEDFPU) \ + save_init_fpu( tsk ); \ +} while (0) + +#define __clear_fpu( tsk ) \ +do { \ + if ((tsk)->thread_info->status & TS_USEDFPU) { \ + asm volatile("fnclex ; fwait"); \ + (tsk)->thread_info->status &= ~TS_USEDFPU; \ + stts(); \ + } \ +} while (0) + + +/* + * These disable preemption on their own and are safe + */ +static inline void save_init_fpu( struct task_struct *tsk ) +{ + preempt_disable(); + __save_init_fpu(tsk); + stts(); + preempt_enable(); +} + +#define unlazy_fpu( tsk ) do { \ + preempt_disable(); \ + __unlazy_fpu(tsk); \ + preempt_enable(); \ +} while (0) + +#define clear_fpu( tsk ) do { \ + preempt_disable(); \ + __clear_fpu( tsk ); \ + preempt_enable(); \ +} while (0) + \ +/* + * FPU state interaction... + */ +extern unsigned short get_fpu_cwd( struct task_struct *tsk ); +extern unsigned short get_fpu_swd( struct task_struct *tsk ); +extern unsigned short get_fpu_mxcsr( struct task_struct *tsk ); + +/* + * Signal frame handlers... + */ +extern int save_i387( struct _fpstate __user *buf ); +extern int restore_i387( struct _fpstate __user *buf ); + +/* + * ptrace request handers... + */ +extern int get_fpregs( struct user_i387_struct __user *buf, + struct task_struct *tsk ); +extern int set_fpregs( struct task_struct *tsk, + struct user_i387_struct __user *buf ); + +extern int get_fpxregs( struct user_fxsr_struct __user *buf, + struct task_struct *tsk ); +extern int set_fpxregs( struct task_struct *tsk, + struct user_fxsr_struct __user *buf ); + +/* + * FPU state for core dumps... + */ +extern int dump_fpu( struct pt_regs *regs, + struct user_i387_struct *fpu ); + +#endif /* __ASM_I386_I387_H */ diff --git a/include/asm-i386/i8259.h b/include/asm-i386/i8259.h new file mode 100644 index 00000000000..29d8f9a6b3f --- /dev/null +++ b/include/asm-i386/i8259.h @@ -0,0 +1,17 @@ +#ifndef __ASM_I8259_H__ +#define __ASM_I8259_H__ + +extern unsigned int cached_irq_mask; + +#define __byte(x,y) (((unsigned char *) &(y))[x]) +#define cached_master_mask (__byte(0, cached_irq_mask)) +#define cached_slave_mask (__byte(1, cached_irq_mask)) + +extern spinlock_t i8259A_lock; + +extern void init_8259A(int auto_eoi); +extern void enable_8259A_irq(unsigned int irq); +extern void disable_8259A_irq(unsigned int irq); +extern unsigned int startup_8259A_irq(unsigned int irq); + +#endif /* __ASM_I8259_H__ */ diff --git a/include/asm-i386/ide.h b/include/asm-i386/ide.h new file mode 100644 index 00000000000..859ebf4da63 --- /dev/null +++ b/include/asm-i386/ide.h @@ -0,0 +1,69 @@ +/* + * linux/include/asm-i386/ide.h + * + * Copyright (C) 1994-1996 Linus Torvalds & authors + */ + +/* + * This file contains the i386 architecture specific IDE code. + */ + +#ifndef __ASMi386_IDE_H +#define __ASMi386_IDE_H + +#ifdef __KERNEL__ + +#include + +#ifndef MAX_HWIFS +# ifdef CONFIG_BLK_DEV_IDEPCI +#define MAX_HWIFS 10 +# else +#define MAX_HWIFS 6 +# endif +#endif + +#define IDE_ARCH_OBSOLETE_DEFAULTS + +static __inline__ int ide_default_irq(unsigned long base) +{ + switch (base) { + case 0x1f0: return 14; + case 0x170: return 15; + case 0x1e8: return 11; + case 0x168: return 10; + case 0x1e0: return 8; + case 0x160: return 12; + default: + return 0; + } +} + +static __inline__ unsigned long ide_default_io_base(int index) +{ + switch (index) { + case 0: return 0x1f0; + case 1: return 0x170; + case 2: return 0x1e8; + case 3: return 0x168; + case 4: return 0x1e0; + case 5: return 0x160; + default: + return 0; + } +} + +#define IDE_ARCH_OBSOLETE_INIT +#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */ + +#ifdef CONFIG_BLK_DEV_IDEPCI +#define ide_init_default_irq(base) (0) +#else +#define ide_init_default_irq(base) ide_default_irq(base) +#endif + +#include + +#endif /* __KERNEL__ */ + +#endif /* __ASMi386_IDE_H */ diff --git a/include/asm-i386/io.h b/include/asm-i386/io.h new file mode 100644 index 00000000000..7babb97a02e --- /dev/null +++ b/include/asm-i386/io.h @@ -0,0 +1,381 @@ +#ifndef _ASM_IO_H +#define _ASM_IO_H + +#include +#include +#include + +/* + * This file contains the definitions for the x86 IO instructions + * inb/inw/inl/outb/outw/outl and the "string versions" of the same + * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing" + * versions of the single-IO instructions (inb_p/inw_p/..). + * + * This file is not meant to be obfuscating: it's just complicated + * to (a) handle it all in a way that makes gcc able to optimize it + * as well as possible and (b) trying to avoid writing the same thing + * over and over again with slight variations and possibly making a + * mistake somewhere. + */ + +/* + * Thanks to James van Artsdalen for a better timing-fix than + * the two short jumps: using outb's to a nonexistent port seems + * to guarantee better timings even on fast machines. + * + * On the other hand, I'd like to be sure of a non-existent port: + * I feel a bit unsafe about using 0x80 (should be safe, though) + * + * Linus + */ + + /* + * Bit simplified and optimized by Jan Hubicka + * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999. + * + * isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added, + * isa_read[wl] and isa_write[wl] fixed + * - Arnaldo Carvalho de Melo + */ + +#define IO_SPACE_LIMIT 0xffff + +#define XQUAD_PORTIO_BASE 0xfe400000 +#define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */ + +#ifdef __KERNEL__ + +#include + +#include + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +/** + * virt_to_phys - map virtual addresses to physical + * @address: address to remap + * + * The returned physical address is the physical (CPU) mapping for + * the memory address given. It is only valid to use this function on + * addresses directly mapped or allocated via kmalloc. + * + * This function does not give bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ + +static inline unsigned long virt_to_phys(volatile void * address) +{ + return __pa(address); +} + +/** + * phys_to_virt - map physical address to virtual + * @address: address to remap + * + * The returned virtual address is a current CPU mapping for + * the memory address given. It is only valid to use this function on + * addresses that have a kernel mapping + * + * This function does not handle bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ + +static inline void * phys_to_virt(unsigned long address) +{ + return __va(address); +} + +/* + * Change "struct page" to physical address. + */ +#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT) + +extern void __iomem * __ioremap(unsigned long offset, unsigned long size, unsigned long flags); + +/** + * ioremap - map bus memory into CPU space + * @offset: bus address of the memory + * @size: size of the resource to map + * + * ioremap performs a platform specific sequence of operations to + * make bus memory CPU accessible via the readb/readw/readl/writeb/ + * writew/writel functions and the other mmio helpers. The returned + * address is not guaranteed to be usable directly as a virtual + * address. + */ + +static inline void __iomem * ioremap(unsigned long offset, unsigned long size) +{ + return __ioremap(offset, size, 0); +} + +extern void __iomem * ioremap_nocache(unsigned long offset, unsigned long size); +extern void iounmap(volatile void __iomem *addr); + +/* + * bt_ioremap() and bt_iounmap() are for temporary early boot-time + * mappings, before the real ioremap() is functional. + * A boot-time mapping is currently limited to at most 16 pages. + */ +extern void *bt_ioremap(unsigned long offset, unsigned long size); +extern void bt_iounmap(void *addr, unsigned long size); + +/* + * ISA I/O bus memory addresses are 1:1 with the physical address. + */ +#define isa_virt_to_bus virt_to_phys +#define isa_page_to_bus page_to_phys +#define isa_bus_to_virt phys_to_virt + +/* + * However PCI ones are not necessarily 1:1 and therefore these interfaces + * are forbidden in portable PCI drivers. + * + * Allow them on x86 for legacy drivers, though. + */ +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt + +/* + * readX/writeX() are used to access memory mapped devices. On some + * architectures the memory mapped IO stuff needs to be accessed + * differently. On the x86 architecture, we just read/write the + * memory location directly. + */ + +static inline unsigned char readb(const volatile void __iomem *addr) +{ + return *(volatile unsigned char __force *) addr; +} +static inline unsigned short readw(const volatile void __iomem *addr) +{ + return *(volatile unsigned short __force *) addr; +} +static inline unsigned int readl(const volatile void __iomem *addr) +{ + return *(volatile unsigned int __force *) addr; +} +#define readb_relaxed(addr) readb(addr) +#define readw_relaxed(addr) readw(addr) +#define readl_relaxed(addr) readl(addr) +#define __raw_readb readb +#define __raw_readw readw +#define __raw_readl readl + +static inline void writeb(unsigned char b, volatile void __iomem *addr) +{ + *(volatile unsigned char __force *) addr = b; +} +static inline void writew(unsigned short b, volatile void __iomem *addr) +{ + *(volatile unsigned short __force *) addr = b; +} +static inline void writel(unsigned int b, volatile void __iomem *addr) +{ + *(volatile unsigned int __force *) addr = b; +} +#define __raw_writeb writeb +#define __raw_writew writew +#define __raw_writel writel + +#define mmiowb() + +static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count) +{ + memset((void __force *) addr, val, count); +} +static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count) +{ + __memcpy(dst, (void __force *) src, count); +} +static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count) +{ + __memcpy((void __force *) dst, src, count); +} + +/* + * ISA space is 'always mapped' on a typical x86 system, no need to + * explicitly ioremap() it. The fact that the ISA IO space is mapped + * to PAGE_OFFSET is pure coincidence - it does not mean ISA values + * are physical addresses. The following constant pointer can be + * used as the IO-area pointer (it can be iounmapped as well, so the + * analogy with PCI is quite large): + */ +#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET)) + +#define isa_readb(a) readb(__ISA_IO_base + (a)) +#define isa_readw(a) readw(__ISA_IO_base + (a)) +#define isa_readl(a) readl(__ISA_IO_base + (a)) +#define isa_writeb(b,a) writeb(b,__ISA_IO_base + (a)) +#define isa_writew(w,a) writew(w,__ISA_IO_base + (a)) +#define isa_writel(l,a) writel(l,__ISA_IO_base + (a)) +#define isa_memset_io(a,b,c) memset_io(__ISA_IO_base + (a),(b),(c)) +#define isa_memcpy_fromio(a,b,c) memcpy_fromio((a),__ISA_IO_base + (b),(c)) +#define isa_memcpy_toio(a,b,c) memcpy_toio(__ISA_IO_base + (a),(b),(c)) + + +/* + * Again, i386 does not require mem IO specific function. + */ + +#define eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),(void __force *)(b),(c),(d)) +#define isa_eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),(void __force *)(__ISA_IO_base + (b)),(c),(d)) + +/** + * check_signature - find BIOS signatures + * @io_addr: mmio address to check + * @signature: signature block + * @length: length of signature + * + * Perform a signature comparison with the mmio address io_addr. This + * address should have been obtained by ioremap. + * Returns 1 on a match. + */ + +static inline int check_signature(volatile void __iomem * io_addr, + const unsigned char *signature, int length) +{ + int retval = 0; + do { + if (readb(io_addr) != *signature) + goto out; + io_addr++; + signature++; + length--; + } while (length); + retval = 1; +out: + return retval; +} + +/* + * Cache management + * + * This needed for two cases + * 1. Out of order aware processors + * 2. Accidentally out of order processors (PPro errata #51) + */ + +#if defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE) + +static inline void flush_write_buffers(void) +{ + __asm__ __volatile__ ("lock; addl $0,0(%%esp)": : :"memory"); +} + +#define dma_cache_inv(_start,_size) flush_write_buffers() +#define dma_cache_wback(_start,_size) flush_write_buffers() +#define dma_cache_wback_inv(_start,_size) flush_write_buffers() + +#else + +/* Nothing to do */ + +#define dma_cache_inv(_start,_size) do { } while (0) +#define dma_cache_wback(_start,_size) do { } while (0) +#define dma_cache_wback_inv(_start,_size) do { } while (0) +#define flush_write_buffers() + +#endif + +#endif /* __KERNEL__ */ + +#ifdef SLOW_IO_BY_JUMPING +#define __SLOW_DOWN_IO "jmp 1f; 1: jmp 1f; 1:" +#else +#define __SLOW_DOWN_IO "outb %%al,$0x80;" +#endif + +static inline void slow_down_io(void) { + __asm__ __volatile__( + __SLOW_DOWN_IO +#ifdef REALLY_SLOW_IO + __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO +#endif + : : ); +} + +#ifdef CONFIG_X86_NUMAQ +extern void *xquad_portio; /* Where the IO area was mapped */ +#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port) +#define __BUILDIO(bwl,bw,type) \ +static inline void out##bwl##_quad(unsigned type value, int port, int quad) { \ + if (xquad_portio) \ + write##bwl(value, XQUAD_PORT_ADDR(port, quad)); \ + else \ + out##bwl##_local(value, port); \ +} \ +static inline void out##bwl(unsigned type value, int port) { \ + out##bwl##_quad(value, port, 0); \ +} \ +static inline unsigned type in##bwl##_quad(int port, int quad) { \ + if (xquad_portio) \ + return read##bwl(XQUAD_PORT_ADDR(port, quad)); \ + else \ + return in##bwl##_local(port); \ +} \ +static inline unsigned type in##bwl(int port) { \ + return in##bwl##_quad(port, 0); \ +} +#else +#define __BUILDIO(bwl,bw,type) \ +static inline void out##bwl(unsigned type value, int port) { \ + out##bwl##_local(value, port); \ +} \ +static inline unsigned type in##bwl(int port) { \ + return in##bwl##_local(port); \ +} +#endif + + +#define BUILDIO(bwl,bw,type) \ +static inline void out##bwl##_local(unsigned type value, int port) { \ + __asm__ __volatile__("out" #bwl " %" #bw "0, %w1" : : "a"(value), "Nd"(port)); \ +} \ +static inline unsigned type in##bwl##_local(int port) { \ + unsigned type value; \ + __asm__ __volatile__("in" #bwl " %w1, %" #bw "0" : "=a"(value) : "Nd"(port)); \ + return value; \ +} \ +static inline void out##bwl##_local_p(unsigned type value, int port) { \ + out##bwl##_local(value, port); \ + slow_down_io(); \ +} \ +static inline unsigned type in##bwl##_local_p(int port) { \ + unsigned type value = in##bwl##_local(port); \ + slow_down_io(); \ + return value; \ +} \ +__BUILDIO(bwl,bw,type) \ +static inline void out##bwl##_p(unsigned type value, int port) { \ + out##bwl(value, port); \ + slow_down_io(); \ +} \ +static inline unsigned type in##bwl##_p(int port) { \ + unsigned type value = in##bwl(port); \ + slow_down_io(); \ + return value; \ +} \ +static inline void outs##bwl(int port, const void *addr, unsigned long count) { \ + __asm__ __volatile__("rep; outs" #bwl : "+S"(addr), "+c"(count) : "d"(port)); \ +} \ +static inline void ins##bwl(int port, void *addr, unsigned long count) { \ + __asm__ __volatile__("rep; ins" #bwl : "+D"(addr), "+c"(count) : "d"(port)); \ +} + +BUILDIO(b,b,char) +BUILDIO(w,w,short) +BUILDIO(l,,int) + +#endif diff --git a/include/asm-i386/io_apic.h b/include/asm-i386/io_apic.h new file mode 100644 index 00000000000..002c203ccd6 --- /dev/null +++ b/include/asm-i386/io_apic.h @@ -0,0 +1,213 @@ +#ifndef __ASM_IO_APIC_H +#define __ASM_IO_APIC_H + +#include +#include +#include + +/* + * Intel IO-APIC support for SMP and UP systems. + * + * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar + */ + +#ifdef CONFIG_X86_IO_APIC + +#ifdef CONFIG_PCI_MSI +static inline int use_pci_vector(void) {return 1;} +static inline void disable_edge_ioapic_vector(unsigned int vector) { } +static inline void mask_and_ack_level_ioapic_vector(unsigned int vector) { } +static inline void end_edge_ioapic_vector (unsigned int vector) { } +#define startup_level_ioapic startup_level_ioapic_vector +#define shutdown_level_ioapic mask_IO_APIC_vector +#define enable_level_ioapic unmask_IO_APIC_vector +#define disable_level_ioapic mask_IO_APIC_vector +#define mask_and_ack_level_ioapic mask_and_ack_level_ioapic_vector +#define end_level_ioapic end_level_ioapic_vector +#define set_ioapic_affinity set_ioapic_affinity_vector + +#define startup_edge_ioapic startup_edge_ioapic_vector +#define shutdown_edge_ioapic disable_edge_ioapic_vector +#define enable_edge_ioapic unmask_IO_APIC_vector +#define disable_edge_ioapic disable_edge_ioapic_vector +#define ack_edge_ioapic ack_edge_ioapic_vector +#define end_edge_ioapic end_edge_ioapic_vector +#else +static inline int use_pci_vector(void) {return 0;} +static inline void disable_edge_ioapic_irq(unsigned int irq) { } +static inline void mask_and_ack_level_ioapic_irq(unsigned int irq) { } +static inline void end_edge_ioapic_irq (unsigned int irq) { } +#define startup_level_ioapic startup_level_ioapic_irq +#define shutdown_level_ioapic mask_IO_APIC_irq +#define enable_level_ioapic unmask_IO_APIC_irq +#define disable_level_ioapic mask_IO_APIC_irq +#define mask_and_ack_level_ioapic mask_and_ack_level_ioapic_irq +#define end_level_ioapic end_level_ioapic_irq +#define set_ioapic_affinity set_ioapic_affinity_irq + +#define startup_edge_ioapic startup_edge_ioapic_irq +#define shutdown_edge_ioapic disable_edge_ioapic_irq +#define enable_edge_ioapic unmask_IO_APIC_irq +#define disable_edge_ioapic disable_edge_ioapic_irq +#define ack_edge_ioapic ack_edge_ioapic_irq +#define end_edge_ioapic end_edge_ioapic_irq +#endif + +#define IO_APIC_BASE(idx) \ + ((volatile int *)(__fix_to_virt(FIX_IO_APIC_BASE_0 + idx) \ + + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK))) + +/* + * The structure of the IO-APIC: + */ +union IO_APIC_reg_00 { + u32 raw; + struct { + u32 __reserved_2 : 14, + LTS : 1, + delivery_type : 1, + __reserved_1 : 8, + ID : 8; + } __attribute__ ((packed)) bits; +}; + +union IO_APIC_reg_01 { + u32 raw; + struct { + u32 version : 8, + __reserved_2 : 7, + PRQ : 1, + entries : 8, + __reserved_1 : 8; + } __attribute__ ((packed)) bits; +}; + +union IO_APIC_reg_02 { + u32 raw; + struct { + u32 __reserved_2 : 24, + arbitration : 4, + __reserved_1 : 4; + } __attribute__ ((packed)) bits; +}; + +union IO_APIC_reg_03 { + u32 raw; + struct { + u32 boot_DT : 1, + __reserved_1 : 31; + } __attribute__ ((packed)) bits; +}; + +/* + * # of IO-APICs and # of IRQ routing registers + */ +extern int nr_ioapics; +extern int nr_ioapic_registers[MAX_IO_APICS]; + +enum ioapic_irq_destination_types { + dest_Fixed = 0, + dest_LowestPrio = 1, + dest_SMI = 2, + dest__reserved_1 = 3, + dest_NMI = 4, + dest_INIT = 5, + dest__reserved_2 = 6, + dest_ExtINT = 7 +}; + +struct IO_APIC_route_entry { + __u32 vector : 8, + delivery_mode : 3, /* 000: FIXED + * 001: lowest prio + * 111: ExtINT + */ + dest_mode : 1, /* 0: physical, 1: logical */ + delivery_status : 1, + polarity : 1, + irr : 1, + trigger : 1, /* 0: edge, 1: level */ + mask : 1, /* 0: enabled, 1: disabled */ + __reserved_2 : 15; + + union { struct { __u32 + __reserved_1 : 24, + physical_dest : 4, + __reserved_2 : 4; + } physical; + + struct { __u32 + __reserved_1 : 24, + logical_dest : 8; + } logical; + } dest; + +} __attribute__ ((packed)); + +/* + * MP-BIOS irq configuration table structures: + */ + +/* I/O APIC entries */ +extern struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS]; + +/* # of MP IRQ source entries */ +extern int mp_irq_entries; + +/* MP IRQ source entries */ +extern struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; + +/* non-0 if default (table-less) MP configuration */ +extern int mpc_default_type; + +static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg) +{ + *IO_APIC_BASE(apic) = reg; + return *(IO_APIC_BASE(apic)+4); +} + +static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value) +{ + *IO_APIC_BASE(apic) = reg; + *(IO_APIC_BASE(apic)+4) = value; +} + +/* + * Re-write a value: to be used for read-modify-write + * cycles where the read already set up the index register. + * + * Older SiS APIC requires we rewrite the index regiser + */ +extern int sis_apic_bug; +static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value) +{ + if (sis_apic_bug) + *IO_APIC_BASE(apic) = reg; + *(IO_APIC_BASE(apic)+4) = value; +} + +/* 1 if "noapic" boot option passed */ +extern int skip_ioapic_setup; + +/* + * If we use the IO-APIC for IRQ routing, disable automatic + * assignment of PCI IRQ's. + */ +#define io_apic_assign_pci_irqs (mp_irq_entries && !skip_ioapic_setup && io_apic_irqs) + +#ifdef CONFIG_ACPI_BOOT +extern int io_apic_get_unique_id (int ioapic, int apic_id); +extern int io_apic_get_version (int ioapic); +extern int io_apic_get_redir_entries (int ioapic); +extern int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low); +#endif /*CONFIG_ACPI_BOOT*/ + +extern int (*ioapic_renumber_irq)(int ioapic, int irq); + +#else /* !CONFIG_X86_IO_APIC */ +#define io_apic_assign_pci_irqs 0 +#endif + +extern int assign_irq_vector(int irq); + +#endif diff --git a/include/asm-i386/ioctl.h b/include/asm-i386/ioctl.h new file mode 100644 index 00000000000..543f7843d55 --- /dev/null +++ b/include/asm-i386/ioctl.h @@ -0,0 +1,85 @@ +/* $Id: ioctl.h,v 1.5 1993/07/19 21:53:50 root Exp root $ + * + * linux/ioctl.h for Linux by H.H. Bergman. + */ + +#ifndef _ASMI386_IOCTL_H +#define _ASMI386_IOCTL_H + +/* ioctl command encoding: 32 bits total, command in lower 16 bits, + * size of the parameter structure in the lower 14 bits of the + * upper 16 bits. + * Encoding the size of the parameter structure in the ioctl request + * is useful for catching programs compiled with old versions + * and to avoid overwriting user space outside the user buffer area. + * The highest 2 bits are reserved for indicating the ``access mode''. + * NOTE: This limits the max parameter size to 16kB -1 ! + */ + +/* + * The following is for compatibility across the various Linux + * platforms. The i386 ioctl numbering scheme doesn't really enforce + * a type field. De facto, however, the top 8 bits of the lower 16 + * bits are indeed used as a type field, so we might just as well make + * this explicit here. Please be sure to use the decoding macros + * below from now on. + */ +#define _IOC_NRBITS 8 +#define _IOC_TYPEBITS 8 +#define _IOC_SIZEBITS 14 +#define _IOC_DIRBITS 2 + +#define _IOC_NRMASK ((1 << _IOC_NRBITS)-1) +#define _IOC_TYPEMASK ((1 << _IOC_TYPEBITS)-1) +#define _IOC_SIZEMASK ((1 << _IOC_SIZEBITS)-1) +#define _IOC_DIRMASK ((1 << _IOC_DIRBITS)-1) + +#define _IOC_NRSHIFT 0 +#define _IOC_TYPESHIFT (_IOC_NRSHIFT+_IOC_NRBITS) +#define _IOC_SIZESHIFT (_IOC_TYPESHIFT+_IOC_TYPEBITS) +#define _IOC_DIRSHIFT (_IOC_SIZESHIFT+_IOC_SIZEBITS) + +/* + * Direction bits. + */ +#define _IOC_NONE 0U +#define _IOC_WRITE 1U +#define _IOC_READ 2U + +#define _IOC(dir,type,nr,size) \ + (((dir) << _IOC_DIRSHIFT) | \ + ((type) << _IOC_TYPESHIFT) | \ + ((nr) << _IOC_NRSHIFT) | \ + ((size) << _IOC_SIZESHIFT)) + +/* provoke compile error for invalid uses of size argument */ +extern unsigned int __invalid_size_argument_for_IOC; +#define _IOC_TYPECHECK(t) \ + ((sizeof(t) == sizeof(t[1]) && \ + sizeof(t) < (1 << _IOC_SIZEBITS)) ? \ + sizeof(t) : __invalid_size_argument_for_IOC) + +/* used to create numbers */ +#define _IO(type,nr) _IOC(_IOC_NONE,(type),(nr),0) +#define _IOR(type,nr,size) _IOC(_IOC_READ,(type),(nr),(_IOC_TYPECHECK(size))) +#define _IOW(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size))) +#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size))) +#define _IOR_BAD(type,nr,size) _IOC(_IOC_READ,(type),(nr),sizeof(size)) +#define _IOW_BAD(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),sizeof(size)) +#define _IOWR_BAD(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size)) + +/* used to decode ioctl numbers.. */ +#define _IOC_DIR(nr) (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) +#define _IOC_TYPE(nr) (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK) +#define _IOC_NR(nr) (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK) +#define _IOC_SIZE(nr) (((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK) + +/* ...and for the drivers/sound files... */ + +#define IOC_IN (_IOC_WRITE << _IOC_DIRSHIFT) +#define IOC_OUT (_IOC_READ << _IOC_DIRSHIFT) +#define IOC_INOUT ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT) +#define IOCSIZE_MASK (_IOC_SIZEMASK << _IOC_SIZESHIFT) +#define IOCSIZE_SHIFT (_IOC_SIZESHIFT) + +#endif /* _ASMI386_IOCTL_H */ diff --git a/include/asm-i386/ioctls.h b/include/asm-i386/ioctls.h new file mode 100644 index 00000000000..f962fadab0f --- /dev/null +++ b/include/asm-i386/ioctls.h @@ -0,0 +1,83 @@ +#ifndef __ARCH_I386_IOCTLS_H__ +#define __ARCH_I386_IOCTLS_H__ + +#include + +/* 0x54 is just a magic number to make these relatively unique ('T') */ + +#define TCGETS 0x5401 +#define TCSETS 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */ +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 +#define TCGETA 0x5405 +#define TCSETA 0x5406 +#define TCSETAW 0x5407 +#define TCSETAF 0x5408 +#define TCSBRK 0x5409 +#define TCXONC 0x540A +#define TCFLSH 0x540B +#define TIOCEXCL 0x540C +#define TIOCNXCL 0x540D +#define TIOCSCTTY 0x540E +#define TIOCGPGRP 0x540F +#define TIOCSPGRP 0x5410 +#define TIOCOUTQ 0x5411 +#define TIOCSTI 0x5412 +#define TIOCGWINSZ 0x5413 +#define TIOCSWINSZ 0x5414 +#define TIOCMGET 0x5415 +#define TIOCMBIS 0x5416 +#define TIOCMBIC 0x5417 +#define TIOCMSET 0x5418 +#define TIOCGSOFTCAR 0x5419 +#define TIOCSSOFTCAR 0x541A +#define FIONREAD 0x541B +#define TIOCINQ FIONREAD +#define TIOCLINUX 0x541C +#define TIOCCONS 0x541D +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TIOCPKT 0x5420 +#define FIONBIO 0x5421 +#define TIOCNOTTY 0x5422 +#define TIOCSETD 0x5423 +#define TIOCGETD 0x5424 +#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ +/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */ +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID 0x5429 /* Return the session ID of FD */ +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ + +#define FIONCLEX 0x5450 +#define FIOCLEX 0x5451 +#define FIOASYNC 0x5452 +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ + +#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ +#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */ +#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */ +#define FIOQSIZE 0x5460 + +/* Used for packet mode */ +#define TIOCPKT_DATA 0 +#define TIOCPKT_FLUSHREAD 1 +#define TIOCPKT_FLUSHWRITE 2 +#define TIOCPKT_STOP 4 +#define TIOCPKT_START 8 +#define TIOCPKT_NOSTOP 16 +#define TIOCPKT_DOSTOP 32 + +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + +#endif diff --git a/include/asm-i386/ipc.h b/include/asm-i386/ipc.h new file mode 100644 index 00000000000..a46e3d9c2a3 --- /dev/null +++ b/include/asm-i386/ipc.h @@ -0,0 +1 @@ +#include diff --git a/include/asm-i386/ipcbuf.h b/include/asm-i386/ipcbuf.h new file mode 100644 index 00000000000..0dcad4f84c2 --- /dev/null +++ b/include/asm-i386/ipcbuf.h @@ -0,0 +1,29 @@ +#ifndef __i386_IPCBUF_H__ +#define __i386_IPCBUF_H__ + +/* + * The ipc64_perm structure for i386 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit mode_t and seq + * - 2 miscellaneous 32-bit values + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + __kernel_mode_t mode; + unsigned short __pad1; + unsigned short seq; + unsigned short __pad2; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* __i386_IPCBUF_H__ */ diff --git a/include/asm-i386/irq.h b/include/asm-i386/irq.h new file mode 100644 index 00000000000..05b9e61b0a7 --- /dev/null +++ b/include/asm-i386/irq.h @@ -0,0 +1,41 @@ +#ifndef _ASM_IRQ_H +#define _ASM_IRQ_H + +/* + * linux/include/asm/irq.h + * + * (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar + * + * IRQ/IPI changes taken from work by Thomas Radke + * + */ + +#include +#include +/* include comes from machine specific directory */ +#include "irq_vectors.h" +#include + +static __inline__ int irq_canonicalize(int irq) +{ + return ((irq == 2) ? 9 : irq); +} + +extern void release_vm86_irqs(struct task_struct *); + +#ifdef CONFIG_X86_LOCAL_APIC +# define ARCH_HAS_NMI_WATCHDOG /* See include/linux/nmi.h */ +#endif + +#ifdef CONFIG_4KSTACKS + extern void irq_ctx_init(int cpu); +# define __ARCH_HAS_DO_SOFTIRQ +#else +# define irq_ctx_init(cpu) do { } while (0) +#endif + +#ifdef CONFIG_IRQBALANCE +extern int irqbalance_disable(char *str); +#endif + +#endif /* _ASM_IRQ_H */ diff --git a/include/asm-i386/ist.h b/include/asm-i386/ist.h new file mode 100644 index 00000000000..d13d1e68afa --- /dev/null +++ b/include/asm-i386/ist.h @@ -0,0 +1,32 @@ +#ifndef _ASM_IST_H +#define _ASM_IST_H + +/* + * Include file for the interface to IST BIOS + * Copyright 2002 Andy Grover + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + + +#ifdef __KERNEL__ + +struct ist_info { + unsigned long signature; + unsigned long command; + unsigned long event; + unsigned long perf_level; +}; + +extern struct ist_info ist_info; + +#endif /* __KERNEL__ */ +#endif /* _ASM_IST_H */ diff --git a/include/asm-i386/kdebug.h b/include/asm-i386/kdebug.h new file mode 100644 index 00000000000..de6498b0d49 --- /dev/null +++ b/include/asm-i386/kdebug.h @@ -0,0 +1,50 @@ +#ifndef _I386_KDEBUG_H +#define _I386_KDEBUG_H 1 + +/* + * Aug-05 2004 Ported by Prasanna S Panchamukhi + * from x86_64 architecture. + */ +#include + +struct pt_regs; + +struct die_args { + struct pt_regs *regs; + const char *str; + long err; + int trapnr; + int signr; +}; + +/* Note - you should never unregister because that can race with NMIs. + If you really want to do it first unregister - then synchronize_kernel - then free. + */ +int register_die_notifier(struct notifier_block *nb); +extern struct notifier_block *i386die_chain; + + +/* Grossly misnamed. */ +enum die_val { + DIE_OOPS = 1, + DIE_INT3, + DIE_DEBUG, + DIE_PANIC, + DIE_NMI, + DIE_DIE, + DIE_NMIWATCHDOG, + DIE_KERNELDEBUG, + DIE_TRAP, + DIE_GPF, + DIE_CALL, + DIE_NMI_IPI, + DIE_PAGE_FAULT, +}; + +static inline int notify_die(enum die_val val,char *str,struct pt_regs *regs,long err,int trap, int sig) +{ + struct die_args args = { .regs=regs, .str=str, .err=err, .trapnr=trap,.signr=sig }; + return notifier_call_chain(&i386die_chain, val, &args); +} + +#endif diff --git a/include/asm-i386/kmap_types.h b/include/asm-i386/kmap_types.h new file mode 100644 index 00000000000..6886a0c3fed --- /dev/null +++ b/include/asm-i386/kmap_types.h @@ -0,0 +1,31 @@ +#ifndef _ASM_KMAP_TYPES_H +#define _ASM_KMAP_TYPES_H + +#include + +#ifdef CONFIG_DEBUG_HIGHMEM +# define D(n) __KM_FENCE_##n , +#else +# define D(n) +#endif + +enum km_type { +D(0) KM_BOUNCE_READ, +D(1) KM_SKB_SUNRPC_DATA, +D(2) KM_SKB_DATA_SOFTIRQ, +D(3) KM_USER0, +D(4) KM_USER1, +D(5) KM_BIO_SRC_IRQ, +D(6) KM_BIO_DST_IRQ, +D(7) KM_PTE0, +D(8) KM_PTE1, +D(9) KM_IRQ0, +D(10) KM_IRQ1, +D(11) KM_SOFTIRQ0, +D(12) KM_SOFTIRQ1, +D(13) KM_TYPE_NR +}; + +#undef D + +#endif diff --git a/include/asm-i386/kprobes.h b/include/asm-i386/kprobes.h new file mode 100644 index 00000000000..4092f68d123 --- /dev/null +++ b/include/asm-i386/kprobes.h @@ -0,0 +1,69 @@ +#ifndef _ASM_KPROBES_H +#define _ASM_KPROBES_H +/* + * Kernel Probes (KProbes) + * include/asm-i386/kprobes.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) IBM Corporation, 2002, 2004 + * + * 2002-Oct Created by Vamsi Krishna S Kernel + * Probes initial implementation ( includes suggestions from + * Rusty Russell). + */ +#include +#include + +struct pt_regs; + +typedef u8 kprobe_opcode_t; +#define BREAKPOINT_INSTRUCTION 0xcc +#define MAX_INSN_SIZE 16 +#define MAX_STACK_SIZE 64 +#define MIN_STACK_SIZE(ADDR) (((MAX_STACK_SIZE) < \ + (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR))) \ + ? (MAX_STACK_SIZE) \ + : (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR))) + +#define JPROBE_ENTRY(pentry) (kprobe_opcode_t *)pentry + +/* Architecture specific copy of original instruction*/ +struct arch_specific_insn { + /* copy of the original instruction */ + kprobe_opcode_t insn[MAX_INSN_SIZE]; +}; + + +/* trap3/1 are intr gates for kprobes. So, restore the status of IF, + * if necessary, before executing the original int3/1 (trap) handler. + */ +static inline void restore_interrupts(struct pt_regs *regs) +{ + if (regs->eflags & IF_MASK) + local_irq_enable(); +} + +#ifdef CONFIG_KPROBES +extern int kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data); +#else /* !CONFIG_KPROBES */ +static inline int kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data) +{ + return 0; +} +#endif +#endif /* _ASM_KPROBES_H */ diff --git a/include/asm-i386/ldt.h b/include/asm-i386/ldt.h new file mode 100644 index 00000000000..e9d3de1dee6 --- /dev/null +++ b/include/asm-i386/ldt.h @@ -0,0 +1,32 @@ +/* + * ldt.h + * + * Definitions of structures used with the modify_ldt system call. + */ +#ifndef _LINUX_LDT_H +#define _LINUX_LDT_H + +/* Maximum number of LDT entries supported. */ +#define LDT_ENTRIES 8192 +/* The size of each LDT entry. */ +#define LDT_ENTRY_SIZE 8 + +#ifndef __ASSEMBLY__ +struct user_desc { + unsigned int entry_number; + unsigned long base_addr; + unsigned int limit; + unsigned int seg_32bit:1; + unsigned int contents:2; + unsigned int read_exec_only:1; + unsigned int limit_in_pages:1; + unsigned int seg_not_present:1; + unsigned int useable:1; +}; + +#define MODIFY_LDT_CONTENTS_DATA 0 +#define MODIFY_LDT_CONTENTS_STACK 1 +#define MODIFY_LDT_CONTENTS_CODE 2 + +#endif /* !__ASSEMBLY__ */ +#endif diff --git a/include/asm-i386/linkage.h b/include/asm-i386/linkage.h new file mode 100644 index 00000000000..af3d8571c5c --- /dev/null +++ b/include/asm-i386/linkage.h @@ -0,0 +1,17 @@ +#ifndef __ASM_LINKAGE_H +#define __ASM_LINKAGE_H + +#define asmlinkage CPP_ASMLINKAGE __attribute__((regparm(0))) +#define FASTCALL(x) x __attribute__((regparm(3))) +#define fastcall __attribute__((regparm(3))) + +#ifdef CONFIG_REGPARM +# define prevent_tail_call(ret) __asm__ ("" : "=r" (ret) : "0" (ret)) +#endif + +#ifdef CONFIG_X86_ALIGNMENT_16 +#define __ALIGN .align 16,0x90 +#define __ALIGN_STR ".align 16,0x90" +#endif + +#endif diff --git a/include/asm-i386/local.h b/include/asm-i386/local.h new file mode 100644 index 00000000000..0177da80dde --- /dev/null +++ b/include/asm-i386/local.h @@ -0,0 +1,70 @@ +#ifndef _ARCH_I386_LOCAL_H +#define _ARCH_I386_LOCAL_H + +#include + +typedef struct +{ + volatile unsigned long counter; +} local_t; + +#define LOCAL_INIT(i) { (i) } + +#define local_read(v) ((v)->counter) +#define local_set(v,i) (((v)->counter) = (i)) + +static __inline__ void local_inc(local_t *v) +{ + __asm__ __volatile__( + "incl %0" + :"=m" (v->counter) + :"m" (v->counter)); +} + +static __inline__ void local_dec(local_t *v) +{ + __asm__ __volatile__( + "decl %0" + :"=m" (v->counter) + :"m" (v->counter)); +} + +static __inline__ void local_add(unsigned long i, local_t *v) +{ + __asm__ __volatile__( + "addl %1,%0" + :"=m" (v->counter) + :"ir" (i), "m" (v->counter)); +} + +static __inline__ void local_sub(unsigned long i, local_t *v) +{ + __asm__ __volatile__( + "subl %1,%0" + :"=m" (v->counter) + :"ir" (i), "m" (v->counter)); +} + +/* On x86, these are no better than the atomic variants. */ +#define __local_inc(l) local_inc(l) +#define __local_dec(l) local_dec(l) +#define __local_add(i,l) local_add((i),(l)) +#define __local_sub(i,l) local_sub((i),(l)) + +/* Use these for per-cpu local_t variables: on some archs they are + * much more efficient than these naive implementations. Note they take + * a variable, not an address. + */ +#define cpu_local_read(v) local_read(&__get_cpu_var(v)) +#define cpu_local_set(v, i) local_set(&__get_cpu_var(v), (i)) +#define cpu_local_inc(v) local_inc(&__get_cpu_var(v)) +#define cpu_local_dec(v) local_dec(&__get_cpu_var(v)) +#define cpu_local_add(i, v) local_add((i), &__get_cpu_var(v)) +#define cpu_local_sub(i, v) local_sub((i), &__get_cpu_var(v)) + +#define __cpu_local_inc(v) cpu_local_inc(v) +#define __cpu_local_dec(v) cpu_local_dec(v) +#define __cpu_local_add(i, v) cpu_local_add((i), (v)) +#define __cpu_local_sub(i, v) cpu_local_sub((i), (v)) + +#endif /* _ARCH_I386_LOCAL_H */ diff --git a/include/asm-i386/mach-bigsmp/mach_apic.h b/include/asm-i386/mach-bigsmp/mach_apic.h new file mode 100644 index 00000000000..2339868270e --- /dev/null +++ b/include/asm-i386/mach-bigsmp/mach_apic.h @@ -0,0 +1,167 @@ +#ifndef __ASM_MACH_APIC_H +#define __ASM_MACH_APIC_H +#include + +#define SEQUENTIAL_APICID +#ifdef SEQUENTIAL_APICID +#define xapic_phys_to_log_apicid(phys_apic) ( (1ul << ((phys_apic) & 0x3)) |\ + ((phys_apic<<2) & (~0xf)) ) +#elif CLUSTERED_APICID +#define xapic_phys_to_log_apicid(phys_apic) ( (1ul << ((phys_apic) & 0x3)) |\ + ((phys_apic) & (~0xf)) ) +#endif + +#define NO_BALANCE_IRQ (1) +#define esr_disable (1) + +#define NO_IOAPIC_CHECK (0) + +static inline int apic_id_registered(void) +{ + return (1); +} + +#define APIC_DFR_VALUE (APIC_DFR_CLUSTER) +/* Round robin the irqs amoung the online cpus */ +static inline cpumask_t target_cpus(void) +{ + static unsigned long cpu = NR_CPUS; + do { + if (cpu >= NR_CPUS) + cpu = first_cpu(cpu_online_map); + else + cpu = next_cpu(cpu, cpu_online_map); + } while (cpu >= NR_CPUS); + return cpumask_of_cpu(cpu); +} +#define TARGET_CPUS (target_cpus()) + +#define INT_DELIVERY_MODE dest_Fixed +#define INT_DEST_MODE 1 /* logical delivery broadcast to all procs */ + +static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid) +{ + return 0; +} + +/* we don't use the phys_cpu_present_map to indicate apicid presence */ +static inline unsigned long check_apicid_present(int bit) +{ + return 1; +} + +#define apicid_cluster(apicid) (apicid & 0xF0) + +static inline unsigned long calculate_ldr(unsigned long old) +{ + unsigned long id; + id = xapic_phys_to_log_apicid(hard_smp_processor_id()); + return ((old & ~APIC_LDR_MASK) | SET_APIC_LOGICAL_ID(id)); +} + +/* + * Set up the logical destination ID. + * + * Intel recommends to set DFR, LDR and TPR before enabling + * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel + * document number 292116). So here it goes... + */ +static inline void init_apic_ldr(void) +{ + unsigned long val; + + apic_write_around(APIC_DFR, APIC_DFR_VALUE); + val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; + val = calculate_ldr(val); + apic_write_around(APIC_LDR, val); +} + +static inline void clustered_apic_check(void) +{ + printk("Enabling APIC mode: %s. Using %d I/O APICs\n", + "Cluster", nr_ioapics); +} + +static inline int multi_timer_check(int apic, int irq) +{ + return 0; +} + +static inline int apicid_to_node(int logical_apicid) +{ + return 0; +} + +extern u8 bios_cpu_apicid[]; + +static inline int cpu_present_to_apicid(int mps_cpu) +{ + if (mps_cpu < NR_CPUS) + return (int)bios_cpu_apicid[mps_cpu]; + else + return BAD_APICID; +} + +static inline physid_mask_t apicid_to_cpu_present(int phys_apicid) +{ + return physid_mask_of_physid(phys_apicid); +} + +extern u8 cpu_2_logical_apicid[]; +/* Mapping from cpu number to logical apicid */ +static inline int cpu_to_logical_apicid(int cpu) +{ + if (cpu >= NR_CPUS) + return BAD_APICID; + return (int)cpu_2_logical_apicid[cpu]; + } + +static inline int mpc_apic_id(struct mpc_config_processor *m, + struct mpc_config_translation *translation_record) +{ + printk("Processor #%d %ld:%ld APIC version %d\n", + m->mpc_apicid, + (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8, + (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4, + m->mpc_apicver); + return m->mpc_apicid; +} + +static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map) +{ + /* For clustered we don't have a good way to do this yet - hack */ + return physids_promote(0xFUL); +} + +#define WAKE_SECONDARY_VIA_INIT + +static inline void setup_portio_remap(void) +{ +} + +static inline void enable_apic_mode(void) +{ +} + +static inline int check_phys_apicid_present(int boot_cpu_physical_apicid) +{ + return (1); +} + +/* As we are using single CPU as destination, pick only one CPU here */ +static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask) +{ + int cpu; + int apicid; + + cpu = first_cpu(cpumask); + apicid = cpu_to_logical_apicid(cpu); + return apicid; +} + +static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb) +{ + return cpuid_apic >> index_msb; +} + +#endif /* __ASM_MACH_APIC_H */ diff --git a/include/asm-i386/mach-bigsmp/mach_apicdef.h b/include/asm-i386/mach-bigsmp/mach_apicdef.h new file mode 100644 index 00000000000..23e58b317c7 --- /dev/null +++ b/include/asm-i386/mach-bigsmp/mach_apicdef.h @@ -0,0 +1,13 @@ +#ifndef __ASM_MACH_APICDEF_H +#define __ASM_MACH_APICDEF_H + +#define APIC_ID_MASK (0x0F<<24) + +static inline unsigned get_apic_id(unsigned long x) +{ + return (((x)>>24)&0x0F); +} + +#define GET_APIC_ID(x) get_apic_id(x) + +#endif diff --git a/include/asm-i386/mach-bigsmp/mach_ipi.h b/include/asm-i386/mach-bigsmp/mach_ipi.h new file mode 100644 index 00000000000..9404c535b7e --- /dev/null +++ b/include/asm-i386/mach-bigsmp/mach_ipi.h @@ -0,0 +1,25 @@ +#ifndef __ASM_MACH_IPI_H +#define __ASM_MACH_IPI_H + +void send_IPI_mask_sequence(cpumask_t mask, int vector); + +static inline void send_IPI_mask(cpumask_t mask, int vector) +{ + send_IPI_mask_sequence(mask, vector); +} + +static inline void send_IPI_allbutself(int vector) +{ + cpumask_t mask = cpu_online_map; + cpu_clear(smp_processor_id(), mask); + + if (!cpus_empty(mask)) + send_IPI_mask(mask, vector); +} + +static inline void send_IPI_all(int vector) +{ + send_IPI_mask(cpu_online_map, vector); +} + +#endif /* __ASM_MACH_IPI_H */ diff --git a/include/asm-i386/mach-bigsmp/mach_mpspec.h b/include/asm-i386/mach-bigsmp/mach_mpspec.h new file mode 100644 index 00000000000..6b5dadcf1d0 --- /dev/null +++ b/include/asm-i386/mach-bigsmp/mach_mpspec.h @@ -0,0 +1,8 @@ +#ifndef __ASM_MACH_MPSPEC_H +#define __ASM_MACH_MPSPEC_H + +#define MAX_IRQ_SOURCES 256 + +#define MAX_MP_BUSSES 32 + +#endif /* __ASM_MACH_MPSPEC_H */ diff --git a/include/asm-i386/mach-default/apm.h b/include/asm-i386/mach-default/apm.h new file mode 100644 index 00000000000..1f730b8bd1f --- /dev/null +++ b/include/asm-i386/mach-default/apm.h @@ -0,0 +1,75 @@ +/* + * include/asm-i386/mach-default/apm.h + * + * Machine specific APM BIOS functions for generic. + * Split out from apm.c by Osamu Tomita + */ + +#ifndef _ASM_APM_H +#define _ASM_APM_H + +#ifdef APM_ZERO_SEGS +# define APM_DO_ZERO_SEGS \ + "pushl %%ds\n\t" \ + "pushl %%es\n\t" \ + "xorl %%edx, %%edx\n\t" \ + "mov %%dx, %%ds\n\t" \ + "mov %%dx, %%es\n\t" \ + "mov %%dx, %%fs\n\t" \ + "mov %%dx, %%gs\n\t" +# define APM_DO_POP_SEGS \ + "popl %%es\n\t" \ + "popl %%ds\n\t" +#else +# define APM_DO_ZERO_SEGS +# define APM_DO_POP_SEGS +#endif + +static inline void apm_bios_call_asm(u32 func, u32 ebx_in, u32 ecx_in, + u32 *eax, u32 *ebx, u32 *ecx, + u32 *edx, u32 *esi) +{ + /* + * N.B. We do NOT need a cld after the BIOS call + * because we always save and restore the flags. + */ + __asm__ __volatile__(APM_DO_ZERO_SEGS + "pushl %%edi\n\t" + "pushl %%ebp\n\t" + "lcall *%%cs:apm_bios_entry\n\t" + "setc %%al\n\t" + "popl %%ebp\n\t" + "popl %%edi\n\t" + APM_DO_POP_SEGS + : "=a" (*eax), "=b" (*ebx), "=c" (*ecx), "=d" (*edx), + "=S" (*esi) + : "a" (func), "b" (ebx_in), "c" (ecx_in) + : "memory", "cc"); +} + +static inline u8 apm_bios_call_simple_asm(u32 func, u32 ebx_in, + u32 ecx_in, u32 *eax) +{ + int cx, dx, si; + u8 error; + + /* + * N.B. We do NOT need a cld after the BIOS call + * because we always save and restore the flags. + */ + __asm__ __volatile__(APM_DO_ZERO_SEGS + "pushl %%edi\n\t" + "pushl %%ebp\n\t" + "lcall *%%cs:apm_bios_entry\n\t" + "setc %%bl\n\t" + "popl %%ebp\n\t" + "popl %%edi\n\t" + APM_DO_POP_SEGS + : "=a" (*eax), "=b" (error), "=c" (cx), "=d" (dx), + "=S" (si) + : "a" (func), "b" (ebx_in), "c" (ecx_in) + : "memory", "cc"); + return error; +} + +#endif /* _ASM_APM_H */ diff --git a/include/asm-i386/mach-default/bios_ebda.h b/include/asm-i386/mach-default/bios_ebda.h new file mode 100644 index 00000000000..9cbd9a668af --- /dev/null +++ b/include/asm-i386/mach-default/bios_ebda.h @@ -0,0 +1,15 @@ +#ifndef _MACH_BIOS_EBDA_H +#define _MACH_BIOS_EBDA_H + +/* + * there is a real-mode segmented pointer pointing to the + * 4K EBDA area at 0x40E. + */ +static inline unsigned int get_bios_ebda(void) +{ + unsigned int address = *(unsigned short *)phys_to_virt(0x40E); + address <<= 4; + return address; /* 0 means none */ +} + +#endif /* _MACH_BIOS_EBDA_H */ diff --git a/include/asm-i386/mach-default/do_timer.h b/include/asm-i386/mach-default/do_timer.h new file mode 100644 index 00000000000..03dd13a48a8 --- /dev/null +++ b/include/asm-i386/mach-default/do_timer.h @@ -0,0 +1,85 @@ +/* defines for inline arch setup functions */ + +#include + +/** + * do_timer_interrupt_hook - hook into timer tick + * @regs: standard registers from interrupt + * + * Description: + * This hook is called immediately after the timer interrupt is ack'd. + * It's primary purpose is to allow architectures that don't possess + * individual per CPU clocks (like the CPU APICs supply) to broadcast the + * timer interrupt as a means of triggering reschedules etc. + **/ + +static inline void do_timer_interrupt_hook(struct pt_regs *regs) +{ + do_timer(regs); +#ifndef CONFIG_SMP + update_process_times(user_mode(regs)); +#endif +/* + * In the SMP case we use the local APIC timer interrupt to do the + * profiling, except when we simulate SMP mode on a uniprocessor + * system, in that case we have to call the local interrupt handler. + */ +#ifndef CONFIG_X86_LOCAL_APIC + profile_tick(CPU_PROFILING, regs); +#else + if (!using_apic_timer) + smp_local_timer_interrupt(regs); +#endif +} + + +/* you can safely undefine this if you don't have the Neptune chipset */ + +#define BUGGY_NEPTUN_TIMER + +/** + * do_timer_overflow - process a detected timer overflow condition + * @count: hardware timer interrupt count on overflow + * + * Description: + * This call is invoked when the jiffies count has not incremented but + * the hardware timer interrupt has. It means that a timer tick interrupt + * came along while the previous one was pending, thus a tick was missed + **/ +static inline int do_timer_overflow(int count) +{ + int i; + + spin_lock(&i8259A_lock); + /* + * This is tricky when I/O APICs are used; + * see do_timer_interrupt(). + */ + i = inb(0x20); + spin_unlock(&i8259A_lock); + + /* assumption about timer being IRQ0 */ + if (i & 0x01) { + /* + * We cannot detect lost timer interrupts ... + * well, that's why we call them lost, don't we? :) + * [hmm, on the Pentium and Alpha we can ... sort of] + */ + count -= LATCH; + } else { +#ifdef BUGGY_NEPTUN_TIMER + /* + * for the Neptun bug we know that the 'latch' + * command doesn't latch the high and low value + * of the counter atomically. Thus we have to + * substract 256 from the counter + * ... funny, isnt it? :) + */ + + count -= 256; +#else + printk("do_slow_gettimeoffset(): hardware timer problem?\n"); +#endif + } + return count; +} diff --git a/include/asm-i386/mach-default/entry_arch.h b/include/asm-i386/mach-default/entry_arch.h new file mode 100644 index 00000000000..bc861469bdb --- /dev/null +++ b/include/asm-i386/mach-default/entry_arch.h @@ -0,0 +1,34 @@ +/* + * This file is designed to contain the BUILD_INTERRUPT specifications for + * all of the extra named interrupt vectors used by the architecture. + * Usually this is the Inter Process Interrupts (IPIs) + */ + +/* + * The following vectors are part of the Linux architecture, there + * is no hardware IRQ pin equivalent for them, they are triggered + * through the ICC by us (IPIs) + */ +#ifdef CONFIG_X86_SMP +BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR) +BUILD_INTERRUPT(invalidate_interrupt,INVALIDATE_TLB_VECTOR) +BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR) +#endif + +/* + * every pentium local APIC has two 'local interrupts', with a + * soft-definable vector attached to both interrupts, one of + * which is a timer interrupt, the other one is error counter + * overflow. Linux uses the local APIC timer interrupt to get + * a much simpler SMP time architecture: + */ +#ifdef CONFIG_X86_LOCAL_APIC +BUILD_INTERRUPT(apic_timer_interrupt,LOCAL_TIMER_VECTOR) +BUILD_INTERRUPT(error_interrupt,ERROR_APIC_VECTOR) +BUILD_INTERRUPT(spurious_interrupt,SPURIOUS_APIC_VECTOR) + +#ifdef CONFIG_X86_MCE_P4THERMAL +BUILD_INTERRUPT(thermal_interrupt,THERMAL_APIC_VECTOR) +#endif + +#endif diff --git a/include/asm-i386/mach-default/io_ports.h b/include/asm-i386/mach-default/io_ports.h new file mode 100644 index 00000000000..a96d9f6604e --- /dev/null +++ b/include/asm-i386/mach-default/io_ports.h @@ -0,0 +1,30 @@ +/* + * arch/i386/mach-generic/io_ports.h + * + * Machine specific IO port address definition for generic. + * Written by Osamu Tomita + */ +#ifndef _MACH_IO_PORTS_H +#define _MACH_IO_PORTS_H + +/* i8253A PIT registers */ +#define PIT_MODE 0x43 +#define PIT_CH0 0x40 +#define PIT_CH2 0x42 + +/* i8259A PIC registers */ +#define PIC_MASTER_CMD 0x20 +#define PIC_MASTER_IMR 0x21 +#define PIC_MASTER_ISR PIC_MASTER_CMD +#define PIC_MASTER_POLL PIC_MASTER_ISR +#define PIC_MASTER_OCW3 PIC_MASTER_ISR +#define PIC_SLAVE_CMD 0xa0 +#define PIC_SLAVE_IMR 0xa1 + +/* i8259A PIC related value */ +#define PIC_CASCADE_IR 2 +#define MASTER_ICW4_DEFAULT 0x01 +#define SLAVE_ICW4_DEFAULT 0x01 +#define PIC_ICW4_AEOI 2 + +#endif /* !_MACH_IO_PORTS_H */ diff --git a/include/asm-i386/mach-default/irq_vectors.h b/include/asm-i386/mach-default/irq_vectors.h new file mode 100644 index 00000000000..881c63ca61a --- /dev/null +++ b/include/asm-i386/mach-default/irq_vectors.h @@ -0,0 +1,96 @@ +/* + * This file should contain #defines for all of the interrupt vector + * numbers used by this architecture. + * + * In addition, there are some standard defines: + * + * FIRST_EXTERNAL_VECTOR: + * The first free place for external interrupts + * + * SYSCALL_VECTOR: + * The IRQ vector a syscall makes the user to kernel transition + * under. + * + * TIMER_IRQ: + * The IRQ number the timer interrupt comes in at. + * + * NR_IRQS: + * The total number of interrupt vectors (including all the + * architecture specific interrupts) needed. + * + */ +#ifndef _ASM_IRQ_VECTORS_H +#define _ASM_IRQ_VECTORS_H + +/* + * IDT vectors usable for external interrupt sources start + * at 0x20: + */ +#define FIRST_EXTERNAL_VECTOR 0x20 + +#define SYSCALL_VECTOR 0x80 + +/* + * Vectors 0x20-0x2f are used for ISA interrupts. + */ + +/* + * Special IRQ vectors used by the SMP architecture, 0xf0-0xff + * + * some of the following vectors are 'rare', they are merged + * into a single vector (CALL_FUNCTION_VECTOR) to save vector space. + * TLB, reschedule and local APIC vectors are performance-critical. + * + * Vectors 0xf0-0xfa are free (reserved for future Linux use). + */ +#define SPURIOUS_APIC_VECTOR 0xff +#define ERROR_APIC_VECTOR 0xfe +#define INVALIDATE_TLB_VECTOR 0xfd +#define RESCHEDULE_VECTOR 0xfc +#define CALL_FUNCTION_VECTOR 0xfb + +#define THERMAL_APIC_VECTOR 0xf0 +/* + * Local APIC timer IRQ vector is on a different priority level, + * to work around the 'lost local interrupt if more than 2 IRQ + * sources per level' errata. + */ +#define LOCAL_TIMER_VECTOR 0xef + +/* + * First APIC vector available to drivers: (vectors 0x30-0xee) + * we start at 0x31 to spread out vectors evenly between priority + * levels. (0x80 is the syscall vector) + */ +#define FIRST_DEVICE_VECTOR 0x31 +#define FIRST_SYSTEM_VECTOR 0xef + +#define TIMER_IRQ 0 + +/* + * 16 8259A IRQ's, 208 potential APIC interrupt sources. + * Right now the APIC is mostly only used for SMP. + * 256 vectors is an architectural limit. (we can have + * more than 256 devices theoretically, but they will + * have to use shared interrupts) + * Since vectors 0x00-0x1f are used/reserved for the CPU, + * the usable vector space is 0x20-0xff (224 vectors) + */ + +/* + * The maximum number of vectors supported by i386 processors + * is limited to 256. For processors other than i386, NR_VECTORS + * should be changed accordingly. + */ +#define NR_VECTORS 256 + +#include "irq_vectors_limits.h" + +#define FPU_IRQ 13 + +#define FIRST_VM86_IRQ 3 +#define LAST_VM86_IRQ 15 +#define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15) + + +#endif /* _ASM_IRQ_VECTORS_H */ diff --git a/include/asm-i386/mach-default/irq_vectors_limits.h b/include/asm-i386/mach-default/irq_vectors_limits.h new file mode 100644 index 00000000000..b330026e6f7 --- /dev/null +++ b/include/asm-i386/mach-default/irq_vectors_limits.h @@ -0,0 +1,21 @@ +#ifndef _ASM_IRQ_VECTORS_LIMITS_H +#define _ASM_IRQ_VECTORS_LIMITS_H + +#ifdef CONFIG_PCI_MSI +#define NR_IRQS FIRST_SYSTEM_VECTOR +#define NR_IRQ_VECTORS NR_IRQS +#else +#ifdef CONFIG_X86_IO_APIC +#define NR_IRQS 224 +# if (224 >= 32 * NR_CPUS) +# define NR_IRQ_VECTORS NR_IRQS +# else +# define NR_IRQ_VECTORS (32 * NR_CPUS) +# endif +#else +#define NR_IRQS 16 +#define NR_IRQ_VECTORS NR_IRQS +#endif +#endif + +#endif /* _ASM_IRQ_VECTORS_LIMITS_H */ diff --git a/include/asm-i386/mach-default/mach_apic.h b/include/asm-i386/mach-default/mach_apic.h new file mode 100644 index 00000000000..627f1cd084b --- /dev/null +++ b/include/asm-i386/mach-default/mach_apic.h @@ -0,0 +1,133 @@ +#ifndef __ASM_MACH_APIC_H +#define __ASM_MACH_APIC_H + +#include +#include + +#define APIC_DFR_VALUE (APIC_DFR_FLAT) + +static inline cpumask_t target_cpus(void) +{ +#ifdef CONFIG_SMP + return cpu_online_map; +#else + return cpumask_of_cpu(0); +#endif +} +#define TARGET_CPUS (target_cpus()) + +#define NO_BALANCE_IRQ (0) +#define esr_disable (0) + +#define NO_IOAPIC_CHECK (0) + +#define INT_DELIVERY_MODE dest_LowestPrio +#define INT_DEST_MODE 1 /* logical delivery broadcast to all procs */ + +static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid) +{ + return physid_isset(apicid, bitmap); +} + +static inline unsigned long check_apicid_present(int bit) +{ + return physid_isset(bit, phys_cpu_present_map); +} + +/* + * Set up the logical destination ID. + * + * Intel recommends to set DFR, LDR and TPR before enabling + * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel + * document number 292116). So here it goes... + */ +static inline void init_apic_ldr(void) +{ + unsigned long val; + + apic_write_around(APIC_DFR, APIC_DFR_VALUE); + val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; + val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id()); + apic_write_around(APIC_LDR, val); +} + +static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map) +{ + return phys_map; +} + +static inline void clustered_apic_check(void) +{ + printk("Enabling APIC mode: %s. Using %d I/O APICs\n", + "Flat", nr_ioapics); +} + +static inline int multi_timer_check(int apic, int irq) +{ + return 0; +} + +static inline int apicid_to_node(int logical_apicid) +{ + return 0; +} + +/* Mapping from cpu number to logical apicid */ +static inline int cpu_to_logical_apicid(int cpu) +{ + return 1 << cpu; +} + +static inline int cpu_present_to_apicid(int mps_cpu) +{ + if (mps_cpu < get_physical_broadcast()) + return mps_cpu; + else + return BAD_APICID; +} + +static inline physid_mask_t apicid_to_cpu_present(int phys_apicid) +{ + return physid_mask_of_physid(phys_apicid); +} + +static inline int mpc_apic_id(struct mpc_config_processor *m, + struct mpc_config_translation *translation_record) +{ + printk("Processor #%d %ld:%ld APIC version %d\n", + m->mpc_apicid, + (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8, + (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4, + m->mpc_apicver); + return (m->mpc_apicid); +} + +static inline void setup_portio_remap(void) +{ +} + +static inline int check_phys_apicid_present(int boot_cpu_physical_apicid) +{ + return physid_isset(boot_cpu_physical_apicid, phys_cpu_present_map); +} + +static inline int apic_id_registered(void) +{ + return physid_isset(GET_APIC_ID(apic_read(APIC_ID)), phys_cpu_present_map); +} + +static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask) +{ + return cpus_addr(cpumask)[0]; +} + +static inline void enable_apic_mode(void) +{ +} + +static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb) +{ + return cpuid_apic >> index_msb; +} + +#endif /* __ASM_MACH_APIC_H */ diff --git a/include/asm-i386/mach-default/mach_apicdef.h b/include/asm-i386/mach-default/mach_apicdef.h new file mode 100644 index 00000000000..7bcb350c3ee --- /dev/null +++ b/include/asm-i386/mach-default/mach_apicdef.h @@ -0,0 +1,13 @@ +#ifndef __ASM_MACH_APICDEF_H +#define __ASM_MACH_APICDEF_H + +#define APIC_ID_MASK (0xF<<24) + +static inline unsigned get_apic_id(unsigned long x) +{ + return (((x)>>24)&0xF); +} + +#define GET_APIC_ID(x) get_apic_id(x) + +#endif diff --git a/include/asm-i386/mach-default/mach_ipi.h b/include/asm-i386/mach-default/mach_ipi.h new file mode 100644 index 00000000000..6f2b17a2008 --- /dev/null +++ b/include/asm-i386/mach-default/mach_ipi.h @@ -0,0 +1,30 @@ +#ifndef __ASM_MACH_IPI_H +#define __ASM_MACH_IPI_H + +void send_IPI_mask_bitmask(cpumask_t mask, int vector); +void __send_IPI_shortcut(unsigned int shortcut, int vector); + +static inline void send_IPI_mask(cpumask_t mask, int vector) +{ + send_IPI_mask_bitmask(mask, vector); +} + +static inline void send_IPI_allbutself(int vector) +{ + /* + * if there are no other CPUs in the system then we get an APIC send + * error if we try to broadcast, thus avoid sending IPIs in this case. + */ + if (!(num_online_cpus() > 1)) + return; + + __send_IPI_shortcut(APIC_DEST_ALLBUT, vector); + return; +} + +static inline void send_IPI_all(int vector) +{ + __send_IPI_shortcut(APIC_DEST_ALLINC, vector); +} + +#endif /* __ASM_MACH_IPI_H */ diff --git a/include/asm-i386/mach-default/mach_mpparse.h b/include/asm-i386/mach-default/mach_mpparse.h new file mode 100644 index 00000000000..1d383248258 --- /dev/null +++ b/include/asm-i386/mach-default/mach_mpparse.h @@ -0,0 +1,28 @@ +#ifndef __ASM_MACH_MPPARSE_H +#define __ASM_MACH_MPPARSE_H + +static inline void mpc_oem_bus_info(struct mpc_config_bus *m, char *name, + struct mpc_config_translation *translation) +{ +// Dprintk("Bus #%d is %s\n", m->mpc_busid, name); +} + +static inline void mpc_oem_pci_bus(struct mpc_config_bus *m, + struct mpc_config_translation *translation) +{ +} + +static inline int mps_oem_check(struct mp_config_table *mpc, char *oem, + char *productid) +{ + return 0; +} + +/* Hook from generic ACPI tables.c */ +static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ + return 0; +} + + +#endif /* __ASM_MACH_MPPARSE_H */ diff --git a/include/asm-i386/mach-default/mach_mpspec.h b/include/asm-i386/mach-default/mach_mpspec.h new file mode 100644 index 00000000000..6b5dadcf1d0 --- /dev/null +++ b/include/asm-i386/mach-default/mach_mpspec.h @@ -0,0 +1,8 @@ +#ifndef __ASM_MACH_MPSPEC_H +#define __ASM_MACH_MPSPEC_H + +#define MAX_IRQ_SOURCES 256 + +#define MAX_MP_BUSSES 32 + +#endif /* __ASM_MACH_MPSPEC_H */ diff --git a/include/asm-i386/mach-default/mach_reboot.h b/include/asm-i386/mach-default/mach_reboot.h new file mode 100644 index 00000000000..521e227db67 --- /dev/null +++ b/include/asm-i386/mach-default/mach_reboot.h @@ -0,0 +1,30 @@ +/* + * arch/i386/mach-generic/mach_reboot.h + * + * Machine specific reboot functions for generic. + * Split out from reboot.c by Osamu Tomita + */ +#ifndef _MACH_REBOOT_H +#define _MACH_REBOOT_H + +static inline void kb_wait(void) +{ + int i; + + for (i = 0; i < 0x10000; i++) + if ((inb_p(0x64) & 0x02) == 0) + break; +} + +static inline void mach_reboot(void) +{ + int i; + for (i = 0; i < 100; i++) { + kb_wait(); + udelay(50); + outb(0xfe, 0x64); /* pulse reset low */ + udelay(50); + } +} + +#endif /* !_MACH_REBOOT_H */ diff --git a/include/asm-i386/mach-default/mach_time.h b/include/asm-i386/mach-default/mach_time.h new file mode 100644 index 00000000000..b749aa44a86 --- /dev/null +++ b/include/asm-i386/mach-default/mach_time.h @@ -0,0 +1,122 @@ +/* + * include/asm-i386/mach-default/mach_time.h + * + * Machine specific set RTC function for generic. + * Split out from time.c by Osamu Tomita + */ +#ifndef _MACH_TIME_H +#define _MACH_TIME_H + +#include + +/* for check timing call set_rtc_mmss() 500ms */ +/* used in arch/i386/time.c::do_timer_interrupt() */ +#define USEC_AFTER 500000 +#define USEC_BEFORE 500000 + +/* + * In order to set the CMOS clock precisely, set_rtc_mmss has to be + * called 500 ms after the second nowtime has started, because when + * nowtime is written into the registers of the CMOS clock, it will + * jump to the next second precisely 500 ms later. Check the Motorola + * MC146818A or Dallas DS12887 data sheet for details. + * + * BUG: This routine does not handle hour overflow properly; it just + * sets the minutes. Usually you'll only notice that after reboot! + */ +static inline int mach_set_rtc_mmss(unsigned long nowtime) +{ + int retval = 0; + int real_seconds, real_minutes, cmos_minutes; + unsigned char save_control, save_freq_select; + + save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */ + CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL); + + save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */ + CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); + + cmos_minutes = CMOS_READ(RTC_MINUTES); + if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) + BCD_TO_BIN(cmos_minutes); + + /* + * since we're only adjusting minutes and seconds, + * don't interfere with hour overflow. This avoids + * messing with unknown time zones but requires your + * RTC not to be off by more than 15 minutes + */ + real_seconds = nowtime % 60; + real_minutes = nowtime / 60; + if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) + real_minutes += 30; /* correct for half hour time zone */ + real_minutes %= 60; + + if (abs(real_minutes - cmos_minutes) < 30) { + if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { + BIN_TO_BCD(real_seconds); + BIN_TO_BCD(real_minutes); + } + CMOS_WRITE(real_seconds,RTC_SECONDS); + CMOS_WRITE(real_minutes,RTC_MINUTES); + } else { + printk(KERN_WARNING + "set_rtc_mmss: can't update from %d to %d\n", + cmos_minutes, real_minutes); + retval = -1; + } + + /* The following flags have to be released exactly in this order, + * otherwise the DS12887 (popular MC146818A clone with integrated + * battery and quartz) will not reset the oscillator and will not + * update precisely 500 ms later. You won't find this mentioned in + * the Dallas Semiconductor data sheets, but who believes data + * sheets anyway ... -- Markus Kuhn + */ + CMOS_WRITE(save_control, RTC_CONTROL); + CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); + + return retval; +} + +static inline unsigned long mach_get_cmos_time(void) +{ + unsigned int year, mon, day, hour, min, sec; + int i; + + /* The Linux interpretation of the CMOS clock register contents: + * When the Update-In-Progress (UIP) flag goes from 1 to 0, the + * RTC registers show the second which has precisely just started. + * Let's hope other operating systems interpret the RTC the same way. + */ + /* read RTC exactly on falling edge of update flag */ + for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */ + if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP) + break; + for (i = 0 ; i < 1000000 ; i++) /* must try at least 2.228 ms */ + if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)) + break; + do { /* Isn't this overkill ? UIP above should guarantee consistency */ + sec = CMOS_READ(RTC_SECONDS); + min = CMOS_READ(RTC_MINUTES); + hour = CMOS_READ(RTC_HOURS); + day = CMOS_READ(RTC_DAY_OF_MONTH); + mon = CMOS_READ(RTC_MONTH); + year = CMOS_READ(RTC_YEAR); + } while (sec != CMOS_READ(RTC_SECONDS)); + if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) + { + BCD_TO_BIN(sec); + BCD_TO_BIN(min); + BCD_TO_BIN(hour); + BCD_TO_BIN(day); + BCD_TO_BIN(mon); + BCD_TO_BIN(year); + } + if ((year += 1900) < 1970) + year += 100; + + return mktime(year, mon, day, hour, min, sec); +} + +#endif /* !_MACH_TIME_H */ diff --git a/include/asm-i386/mach-default/mach_timer.h b/include/asm-i386/mach-default/mach_timer.h new file mode 100644 index 00000000000..4b9703bb028 --- /dev/null +++ b/include/asm-i386/mach-default/mach_timer.h @@ -0,0 +1,48 @@ +/* + * include/asm-i386/mach-default/mach_timer.h + * + * Machine specific calibrate_tsc() for generic. + * Split out from timer_tsc.c by Osamu Tomita + */ +/* ------ Calibrate the TSC ------- + * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset(). + * Too much 64-bit arithmetic here to do this cleanly in C, and for + * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2) + * output busy loop as low as possible. We avoid reading the CTC registers + * directly because of the awkward 8-bit access mechanism of the 82C54 + * device. + */ +#ifndef _MACH_TIMER_H +#define _MACH_TIMER_H + +#define CALIBRATE_LATCH (5 * LATCH) + +static inline void mach_prepare_counter(void) +{ + /* Set the Gate high, disable speaker */ + outb((inb(0x61) & ~0x02) | 0x01, 0x61); + + /* + * Now let's take care of CTC channel 2 + * + * Set the Gate high, program CTC channel 2 for mode 0, + * (interrupt on terminal count mode), binary count, + * load 5 * LATCH count, (LSB and MSB) to begin countdown. + * + * Some devices need a delay here. + */ + outb(0xb0, 0x43); /* binary, mode 0, LSB/MSB, Ch 2 */ + outb_p(CALIBRATE_LATCH & 0xff, 0x42); /* LSB of count */ + outb_p(CALIBRATE_LATCH >> 8, 0x42); /* MSB of count */ +} + +static inline void mach_countup(unsigned long *count_p) +{ + unsigned long count = 0; + do { + count++; + } while ((inb_p(0x61) & 0x20) == 0); + *count_p = count; +} + +#endif /* !_MACH_TIMER_H */ diff --git a/include/asm-i386/mach-default/mach_traps.h b/include/asm-i386/mach-default/mach_traps.h new file mode 100644 index 00000000000..625438b8a6e --- /dev/null +++ b/include/asm-i386/mach-default/mach_traps.h @@ -0,0 +1,41 @@ +/* + * include/asm-i386/mach-default/mach_traps.h + * + * Machine specific NMI handling for generic. + * Split out from traps.c by Osamu Tomita + */ +#ifndef _MACH_TRAPS_H +#define _MACH_TRAPS_H + +#include + +static inline void clear_mem_error(unsigned char reason) +{ + reason = (reason & 0xf) | 4; + outb(reason, 0x61); +} + +static inline unsigned char get_nmi_reason(void) +{ + return inb(0x61); +} + +static inline void reassert_nmi(void) +{ + int old_reg = -1; + + if (do_i_have_lock_cmos()) + old_reg = current_lock_cmos_reg(); + else + lock_cmos(0); /* register doesn't matter here */ + outb(0x8f, 0x70); + inb(0x71); /* dummy */ + outb(0x0f, 0x70); + inb(0x71); /* dummy */ + if (old_reg >= 0) + outb(old_reg, 0x70); + else + unlock_cmos(); +} + +#endif /* !_MACH_TRAPS_H */ diff --git a/include/asm-i386/mach-default/mach_wakecpu.h b/include/asm-i386/mach-default/mach_wakecpu.h new file mode 100644 index 00000000000..673b85c9b27 --- /dev/null +++ b/include/asm-i386/mach-default/mach_wakecpu.h @@ -0,0 +1,41 @@ +#ifndef __ASM_MACH_WAKECPU_H +#define __ASM_MACH_WAKECPU_H + +/* + * This file copes with machines that wakeup secondary CPUs by the + * INIT, INIT, STARTUP sequence. + */ + +#define WAKE_SECONDARY_VIA_INIT + +#define TRAMPOLINE_LOW phys_to_virt(0x467) +#define TRAMPOLINE_HIGH phys_to_virt(0x469) + +#define boot_cpu_apicid boot_cpu_physical_apicid + +static inline void wait_for_init_deassert(atomic_t *deassert) +{ + while (!atomic_read(deassert)); + return; +} + +/* Nothing to do for most platforms, since cleared by the INIT cycle */ +static inline void smp_callin_clear_local_apic(void) +{ +} + +static inline void store_NMI_vector(unsigned short *high, unsigned short *low) +{ +} + +static inline void restore_NMI_vector(unsigned short *high, unsigned short *low) +{ +} + +#if APIC_DEBUG + #define inquire_remote_apic(apicid) __inquire_remote_apic(apicid) +#else + #define inquire_remote_apic(apicid) {} +#endif + +#endif /* __ASM_MACH_WAKECPU_H */ diff --git a/include/asm-i386/mach-default/pci-functions.h b/include/asm-i386/mach-default/pci-functions.h new file mode 100644 index 00000000000..ed0bab42735 --- /dev/null +++ b/include/asm-i386/mach-default/pci-functions.h @@ -0,0 +1,19 @@ +/* + * PCI BIOS function numbering for conventional PCI BIOS + * systems + */ + +#define PCIBIOS_PCI_FUNCTION_ID 0xb1XX +#define PCIBIOS_PCI_BIOS_PRESENT 0xb101 +#define PCIBIOS_FIND_PCI_DEVICE 0xb102 +#define PCIBIOS_FIND_PCI_CLASS_CODE 0xb103 +#define PCIBIOS_GENERATE_SPECIAL_CYCLE 0xb106 +#define PCIBIOS_READ_CONFIG_BYTE 0xb108 +#define PCIBIOS_READ_CONFIG_WORD 0xb109 +#define PCIBIOS_READ_CONFIG_DWORD 0xb10a +#define PCIBIOS_WRITE_CONFIG_BYTE 0xb10b +#define PCIBIOS_WRITE_CONFIG_WORD 0xb10c +#define PCIBIOS_WRITE_CONFIG_DWORD 0xb10d +#define PCIBIOS_GET_ROUTING_OPTIONS 0xb10e +#define PCIBIOS_SET_PCI_HW_INT 0xb10f + diff --git a/include/asm-i386/mach-default/setup_arch_post.h b/include/asm-i386/mach-default/setup_arch_post.h new file mode 100644 index 00000000000..2fc4888721f --- /dev/null +++ b/include/asm-i386/mach-default/setup_arch_post.h @@ -0,0 +1,40 @@ +/** + * machine_specific_memory_setup - Hook for machine specific memory setup. + * + * Description: + * This is included late in kernel/setup.c so that it can make + * use of all of the static functions. + **/ + +static char * __init machine_specific_memory_setup(void) +{ + char *who; + + + who = "BIOS-e820"; + + /* + * Try to copy the BIOS-supplied E820-map. + * + * Otherwise fake a memory map; one section from 0k->640k, + * the next section from 1mb->appropriate_mem_k + */ + sanitize_e820_map(E820_MAP, &E820_MAP_NR); + if (copy_e820_map(E820_MAP, E820_MAP_NR) < 0) { + unsigned long mem_size; + + /* compare results from other methods and take the greater */ + if (ALT_MEM_K < EXT_MEM_K) { + mem_size = EXT_MEM_K; + who = "BIOS-88"; + } else { + mem_size = ALT_MEM_K; + who = "BIOS-e801"; + } + + e820.nr_map = 0; + add_memory_region(0, LOWMEMSIZE(), E820_RAM); + add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM); + } + return who; +} diff --git a/include/asm-i386/mach-default/setup_arch_pre.h b/include/asm-i386/mach-default/setup_arch_pre.h new file mode 100644 index 00000000000..fb42099e7bd --- /dev/null +++ b/include/asm-i386/mach-default/setup_arch_pre.h @@ -0,0 +1,5 @@ +/* Hook to call BIOS initialisation function */ + +/* no action for generic */ + +#define ARCH_SETUP diff --git a/include/asm-i386/mach-default/smpboot_hooks.h b/include/asm-i386/mach-default/smpboot_hooks.h new file mode 100644 index 00000000000..7f45f631105 --- /dev/null +++ b/include/asm-i386/mach-default/smpboot_hooks.h @@ -0,0 +1,44 @@ +/* two abstractions specific to kernel/smpboot.c, mainly to cater to visws + * which needs to alter them. */ + +static inline void smpboot_clear_io_apic_irqs(void) +{ + io_apic_irqs = 0; +} + +static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip) +{ + CMOS_WRITE(0xa, 0xf); + local_flush_tlb(); + Dprintk("1.\n"); + *((volatile unsigned short *) TRAMPOLINE_HIGH) = start_eip >> 4; + Dprintk("2.\n"); + *((volatile unsigned short *) TRAMPOLINE_LOW) = start_eip & 0xf; + Dprintk("3.\n"); +} + +static inline void smpboot_restore_warm_reset_vector(void) +{ + /* + * Install writable page 0 entry to set BIOS data area. + */ + local_flush_tlb(); + + /* + * Paranoid: Set warm reset code and vector here back + * to default values. + */ + CMOS_WRITE(0, 0xf); + + *((volatile long *) phys_to_virt(0x467)) = 0; +} + +static inline void smpboot_setup_io_apic(void) +{ + /* + * Here we can be sure that there is an IO-APIC in the system. Let's + * go and set it up: + */ + if (!skip_ioapic_setup && nr_ioapics) + setup_IO_APIC(); +} diff --git a/include/asm-i386/mach-es7000/mach_apic.h b/include/asm-i386/mach-es7000/mach_apic.h new file mode 100644 index 00000000000..ceab2c464b1 --- /dev/null +++ b/include/asm-i386/mach-es7000/mach_apic.h @@ -0,0 +1,207 @@ +#ifndef __ASM_MACH_APIC_H +#define __ASM_MACH_APIC_H + +extern u8 bios_cpu_apicid[]; + +#define xapic_phys_to_log_apicid(cpu) (bios_cpu_apicid[cpu]) +#define esr_disable (1) + +static inline int apic_id_registered(void) +{ + return (1); +} + +static inline cpumask_t target_cpus(void) +{ +#if defined CONFIG_ES7000_CLUSTERED_APIC + return CPU_MASK_ALL; +#else + return cpumask_of_cpu(smp_processor_id()); +#endif +} +#define TARGET_CPUS (target_cpus()) + +#if defined CONFIG_ES7000_CLUSTERED_APIC +#define APIC_DFR_VALUE (APIC_DFR_CLUSTER) +#define INT_DELIVERY_MODE (dest_LowestPrio) +#define INT_DEST_MODE (1) /* logical delivery broadcast to all procs */ +#define NO_BALANCE_IRQ (1) +#undef WAKE_SECONDARY_VIA_INIT +#define WAKE_SECONDARY_VIA_MIP +#else +#define APIC_DFR_VALUE (APIC_DFR_FLAT) +#define INT_DELIVERY_MODE (dest_Fixed) +#define INT_DEST_MODE (0) /* phys delivery to target procs */ +#define NO_BALANCE_IRQ (0) +#undef APIC_DEST_LOGICAL +#define APIC_DEST_LOGICAL 0x0 +#define WAKE_SECONDARY_VIA_INIT +#endif + +#define NO_IOAPIC_CHECK (1) + +static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid) +{ + return 0; +} +static inline unsigned long check_apicid_present(int bit) +{ + return physid_isset(bit, phys_cpu_present_map); +} + +#define apicid_cluster(apicid) (apicid & 0xF0) + +static inline unsigned long calculate_ldr(int cpu) +{ + unsigned long id; + id = xapic_phys_to_log_apicid(cpu); + return (SET_APIC_LOGICAL_ID(id)); +} + +/* + * Set up the logical destination ID. + * + * Intel recommends to set DFR, LdR and TPR before enabling + * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel + * document number 292116). So here it goes... + */ +static inline void init_apic_ldr(void) +{ + unsigned long val; + int cpu = smp_processor_id(); + + apic_write_around(APIC_DFR, APIC_DFR_VALUE); + val = calculate_ldr(cpu); + apic_write_around(APIC_LDR, val); +} + +extern void es7000_sw_apic(void); +static inline void enable_apic_mode(void) +{ + es7000_sw_apic(); + return; +} + +extern int apic_version [MAX_APICS]; +static inline void clustered_apic_check(void) +{ + int apic = bios_cpu_apicid[smp_processor_id()]; + printk("Enabling APIC mode: %s. Using %d I/O APICs, target cpus %lx\n", + (apic_version[apic] == 0x14) ? + "Physical Cluster" : "Logical Cluster", nr_ioapics, cpus_addr(TARGET_CPUS)[0]); +} + +static inline int multi_timer_check(int apic, int irq) +{ + return 0; +} + +static inline int apicid_to_node(int logical_apicid) +{ + return 0; +} + + +static inline int cpu_present_to_apicid(int mps_cpu) +{ + if (!mps_cpu) + return boot_cpu_physical_apicid; + else if (mps_cpu < NR_CPUS) + return (int) bios_cpu_apicid[mps_cpu]; + else + return BAD_APICID; +} + +static inline physid_mask_t apicid_to_cpu_present(int phys_apicid) +{ + static int id = 0; + physid_mask_t mask; + mask = physid_mask_of_physid(id); + ++id; + return mask; +} + +extern u8 cpu_2_logical_apicid[]; +/* Mapping from cpu number to logical apicid */ +static inline int cpu_to_logical_apicid(int cpu) +{ + if (cpu >= NR_CPUS) + return BAD_APICID; + return (int)cpu_2_logical_apicid[cpu]; +} + +static inline int mpc_apic_id(struct mpc_config_processor *m, struct mpc_config_translation *unused) +{ + printk("Processor #%d %ld:%ld APIC version %d\n", + m->mpc_apicid, + (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8, + (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4, + m->mpc_apicver); + return (m->mpc_apicid); +} + +static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map) +{ + /* For clustered we don't have a good way to do this yet - hack */ + return physids_promote(0xff); +} + + +static inline void setup_portio_remap(void) +{ +} + +extern unsigned int boot_cpu_physical_apicid; +static inline int check_phys_apicid_present(int cpu_physical_apicid) +{ + boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID)); + return (1); +} + +static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask) +{ + int num_bits_set; + int cpus_found = 0; + int cpu; + int apicid; + + num_bits_set = cpus_weight(cpumask); + /* Return id to all */ + if (num_bits_set == NR_CPUS) +#if defined CONFIG_ES7000_CLUSTERED_APIC + return 0xFF; +#else + return cpu_to_logical_apicid(0); +#endif + /* + * The cpus in the mask must all be on the apic cluster. If are not + * on the same apicid cluster return default value of TARGET_CPUS. + */ + cpu = first_cpu(cpumask); + apicid = cpu_to_logical_apicid(cpu); + while (cpus_found < num_bits_set) { + if (cpu_isset(cpu, cpumask)) { + int new_apicid = cpu_to_logical_apicid(cpu); + if (apicid_cluster(apicid) != + apicid_cluster(new_apicid)){ + printk ("%s: Not a valid mask!\n",__FUNCTION__); +#if defined CONFIG_ES7000_CLUSTERED_APIC + return 0xFF; +#else + return cpu_to_logical_apicid(0); +#endif + } + apicid = new_apicid; + cpus_found++; + } + cpu++; + } + return apicid; +} + +static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb) +{ + return cpuid_apic >> index_msb; +} + +#endif /* __ASM_MACH_APIC_H */ diff --git a/include/asm-i386/mach-es7000/mach_apicdef.h b/include/asm-i386/mach-es7000/mach_apicdef.h new file mode 100644 index 00000000000..a58ab5a75c8 --- /dev/null +++ b/include/asm-i386/mach-es7000/mach_apicdef.h @@ -0,0 +1,13 @@ +#ifndef __ASM_MACH_APICDEF_H +#define __ASM_MACH_APICDEF_H + +#define APIC_ID_MASK (0xFF<<24) + +static inline unsigned get_apic_id(unsigned long x) +{ + return (((x)>>24)&0xFF); +} + +#define GET_APIC_ID(x) get_apic_id(x) + +#endif diff --git a/include/asm-i386/mach-es7000/mach_ipi.h b/include/asm-i386/mach-es7000/mach_ipi.h new file mode 100644 index 00000000000..5e61bd220b0 --- /dev/null +++ b/include/asm-i386/mach-es7000/mach_ipi.h @@ -0,0 +1,24 @@ +#ifndef __ASM_MACH_IPI_H +#define __ASM_MACH_IPI_H + +void send_IPI_mask_sequence(cpumask_t mask, int vector); + +static inline void send_IPI_mask(cpumask_t mask, int vector) +{ + send_IPI_mask_sequence(mask, vector); +} + +static inline void send_IPI_allbutself(int vector) +{ + cpumask_t mask = cpu_online_map; + cpu_clear(smp_processor_id(), mask); + if (!cpus_empty(mask)) + send_IPI_mask(mask, vector); +} + +static inline void send_IPI_all(int vector) +{ + send_IPI_mask(cpu_online_map, vector); +} + +#endif /* __ASM_MACH_IPI_H */ diff --git a/include/asm-i386/mach-es7000/mach_mpparse.h b/include/asm-i386/mach-es7000/mach_mpparse.h new file mode 100644 index 00000000000..85809e0898d --- /dev/null +++ b/include/asm-i386/mach-es7000/mach_mpparse.h @@ -0,0 +1,41 @@ +#ifndef __ASM_MACH_MPPARSE_H +#define __ASM_MACH_MPPARSE_H + +static inline void mpc_oem_bus_info(struct mpc_config_bus *m, char *name, + struct mpc_config_translation *translation) +{ + Dprintk("Bus #%d is %s\n", m->mpc_busid, name); +} + +static inline void mpc_oem_pci_bus(struct mpc_config_bus *m, + struct mpc_config_translation *translation) +{ +} + +extern int parse_unisys_oem (char *oemptr, int oem_entries); +extern int find_unisys_acpi_oem_table(unsigned long *oem_addr, int *length); + +static inline int mps_oem_check(struct mp_config_table *mpc, char *oem, + char *productid) +{ + if (mpc->mpc_oemptr) { + struct mp_config_oemtable *oem_table = + (struct mp_config_oemtable *)mpc->mpc_oemptr; + if (!strncmp(oem, "UNISYS", 6)) + return parse_unisys_oem((char *)oem_table, oem_table->oem_length); + } + return 0; +} + +/* Hook from generic ACPI tables.c */ +static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ + unsigned long oem_addr; + int oem_entries; + if (!find_unisys_acpi_oem_table(&oem_addr, &oem_entries)) + return parse_unisys_oem((char *)oem_addr, oem_entries); + return 0; +} + + +#endif /* __ASM_MACH_MPPARSE_H */ diff --git a/include/asm-i386/mach-es7000/mach_mpspec.h b/include/asm-i386/mach-es7000/mach_mpspec.h new file mode 100644 index 00000000000..b1f5039d450 --- /dev/null +++ b/include/asm-i386/mach-es7000/mach_mpspec.h @@ -0,0 +1,8 @@ +#ifndef __ASM_MACH_MPSPEC_H +#define __ASM_MACH_MPSPEC_H + +#define MAX_IRQ_SOURCES 256 + +#define MAX_MP_BUSSES 256 + +#endif /* __ASM_MACH_MPSPEC_H */ diff --git a/include/asm-i386/mach-es7000/mach_wakecpu.h b/include/asm-i386/mach-es7000/mach_wakecpu.h new file mode 100644 index 00000000000..efc903b7348 --- /dev/null +++ b/include/asm-i386/mach-es7000/mach_wakecpu.h @@ -0,0 +1,58 @@ +#ifndef __ASM_MACH_WAKECPU_H +#define __ASM_MACH_WAKECPU_H + +/* + * This file copes with machines that wakeup secondary CPUs by the + * INIT, INIT, STARTUP sequence. + */ + +#ifdef CONFIG_ES7000_CLUSTERED_APIC +#define WAKE_SECONDARY_VIA_MIP +#else +#define WAKE_SECONDARY_VIA_INIT +#endif + +#ifdef WAKE_SECONDARY_VIA_MIP +extern int es7000_start_cpu(int cpu, unsigned long eip); +static inline int +wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) +{ + int boot_error = 0; + boot_error = es7000_start_cpu(phys_apicid, start_eip); + return boot_error; +} +#endif + +#define TRAMPOLINE_LOW phys_to_virt(0x467) +#define TRAMPOLINE_HIGH phys_to_virt(0x469) + +#define boot_cpu_apicid boot_cpu_physical_apicid + +static inline void wait_for_init_deassert(atomic_t *deassert) +{ +#ifdef WAKE_SECONDARY_VIA_INIT + while (!atomic_read(deassert)); +#endif + return; +} + +/* Nothing to do for most platforms, since cleared by the INIT cycle */ +static inline void smp_callin_clear_local_apic(void) +{ +} + +static inline void store_NMI_vector(unsigned short *high, unsigned short *low) +{ +} + +static inline void restore_NMI_vector(unsigned short *high, unsigned short *low) +{ +} + +#if APIC_DEBUG + #define inquire_remote_apic(apicid) __inquire_remote_apic(apicid) +#else + #define inquire_remote_apic(apicid) {} +#endif + +#endif /* __ASM_MACH_WAKECPU_H */ diff --git a/include/asm-i386/mach-generic/irq_vectors_limits.h b/include/asm-i386/mach-generic/irq_vectors_limits.h new file mode 100644 index 00000000000..890ce3f5e09 --- /dev/null +++ b/include/asm-i386/mach-generic/irq_vectors_limits.h @@ -0,0 +1,14 @@ +#ifndef _ASM_IRQ_VECTORS_LIMITS_H +#define _ASM_IRQ_VECTORS_LIMITS_H + +/* + * For Summit or generic (i.e. installer) kernels, we have lots of I/O APICs, + * even with uni-proc kernels, so use a big array. + * + * This value should be the same in both the generic and summit subarches. + * Change one, change 'em both. + */ +#define NR_IRQS 224 +#define NR_IRQ_VECTORS 1024 + +#endif /* _ASM_IRQ_VECTORS_LIMITS_H */ diff --git a/include/asm-i386/mach-generic/mach_apic.h b/include/asm-i386/mach-generic/mach_apic.h new file mode 100644 index 00000000000..ab36d02ebed --- /dev/null +++ b/include/asm-i386/mach-generic/mach_apic.h @@ -0,0 +1,32 @@ +#ifndef __ASM_MACH_APIC_H +#define __ASM_MACH_APIC_H + +#include + +#define esr_disable (genapic->ESR_DISABLE) +#define NO_BALANCE_IRQ (genapic->no_balance_irq) +#define NO_IOAPIC_CHECK (genapic->no_ioapic_check) +#define INT_DELIVERY_MODE (genapic->int_delivery_mode) +#define INT_DEST_MODE (genapic->int_dest_mode) +#undef APIC_DEST_LOGICAL +#define APIC_DEST_LOGICAL (genapic->apic_destination_logical) +#define TARGET_CPUS (genapic->target_cpus()) +#define apic_id_registered (genapic->apic_id_registered) +#define init_apic_ldr (genapic->init_apic_ldr) +#define ioapic_phys_id_map (genapic->ioapic_phys_id_map) +#define clustered_apic_check (genapic->clustered_apic_check) +#define multi_timer_check (genapic->multi_timer_check) +#define apicid_to_node (genapic->apicid_to_node) +#define cpu_to_logical_apicid (genapic->cpu_to_logical_apicid) +#define cpu_present_to_apicid (genapic->cpu_present_to_apicid) +#define apicid_to_cpu_present (genapic->apicid_to_cpu_present) +#define mpc_apic_id (genapic->mpc_apic_id) +#define setup_portio_remap (genapic->setup_portio_remap) +#define check_apicid_present (genapic->check_apicid_present) +#define check_phys_apicid_present (genapic->check_phys_apicid_present) +#define check_apicid_used (genapic->check_apicid_used) +#define cpu_mask_to_apicid (genapic->cpu_mask_to_apicid) +#define enable_apic_mode (genapic->enable_apic_mode) +#define phys_pkg_id (genapic->phys_pkg_id) + +#endif /* __ASM_MACH_APIC_H */ diff --git a/include/asm-i386/mach-generic/mach_apicdef.h b/include/asm-i386/mach-generic/mach_apicdef.h new file mode 100644 index 00000000000..28ed98972ca --- /dev/null +++ b/include/asm-i386/mach-generic/mach_apicdef.h @@ -0,0 +1,11 @@ +#ifndef _GENAPIC_MACH_APICDEF_H +#define _GENAPIC_MACH_APICDEF_H 1 + +#ifndef APIC_DEFINITION +#include + +#define GET_APIC_ID (genapic->get_apic_id) +#define APIC_ID_MASK (genapic->apic_id_mask) +#endif + +#endif diff --git a/include/asm-i386/mach-generic/mach_ipi.h b/include/asm-i386/mach-generic/mach_ipi.h new file mode 100644 index 00000000000..441b0fe3ed1 --- /dev/null +++ b/include/asm-i386/mach-generic/mach_ipi.h @@ -0,0 +1,10 @@ +#ifndef _MACH_IPI_H +#define _MACH_IPI_H 1 + +#include + +#define send_IPI_mask (genapic->send_IPI_mask) +#define send_IPI_allbutself (genapic->send_IPI_allbutself) +#define send_IPI_all (genapic->send_IPI_all) + +#endif diff --git a/include/asm-i386/mach-generic/mach_mpparse.h b/include/asm-i386/mach-generic/mach_mpparse.h new file mode 100644 index 00000000000..dbd9fce54f4 --- /dev/null +++ b/include/asm-i386/mach-generic/mach_mpparse.h @@ -0,0 +1,12 @@ +#ifndef _MACH_MPPARSE_H +#define _MACH_MPPARSE_H 1 + +#include + +#define mpc_oem_bus_info (genapic->mpc_oem_bus_info) +#define mpc_oem_pci_bus (genapic->mpc_oem_pci_bus) + +int mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid); +int acpi_madt_oem_check(char *oem_id, char *oem_table_id); + +#endif diff --git a/include/asm-i386/mach-generic/mach_mpspec.h b/include/asm-i386/mach-generic/mach_mpspec.h new file mode 100644 index 00000000000..9ef0b941bb2 --- /dev/null +++ b/include/asm-i386/mach-generic/mach_mpspec.h @@ -0,0 +1,10 @@ +#ifndef __ASM_MACH_MPSPEC_H +#define __ASM_MACH_MPSPEC_H + +#define MAX_IRQ_SOURCES 256 + +/* Summit or generic (i.e. installer) kernels need lots of bus entries. */ +/* Maximum 256 PCI busses, plus 1 ISA bus in each of 4 cabinets. */ +#define MAX_MP_BUSSES 260 + +#endif /* __ASM_MACH_MPSPEC_H */ diff --git a/include/asm-i386/mach-numaq/mach_apic.h b/include/asm-i386/mach-numaq/mach_apic.h new file mode 100644 index 00000000000..e1a04494764 --- /dev/null +++ b/include/asm-i386/mach-numaq/mach_apic.h @@ -0,0 +1,151 @@ +#ifndef __ASM_MACH_APIC_H +#define __ASM_MACH_APIC_H + +#include +#include +#include + +#define APIC_DFR_VALUE (APIC_DFR_CLUSTER) + +static inline cpumask_t target_cpus(void) +{ + return CPU_MASK_ALL; +} + +#define TARGET_CPUS (target_cpus()) + +#define NO_BALANCE_IRQ (1) +#define esr_disable (1) + +#define NO_IOAPIC_CHECK (0) + +#define INT_DELIVERY_MODE dest_LowestPrio +#define INT_DEST_MODE 0 /* physical delivery on LOCAL quad */ + +#define check_apicid_used(bitmap, apicid) physid_isset(apicid, bitmap) +#define check_apicid_present(bit) physid_isset(bit, phys_cpu_present_map) +#define apicid_cluster(apicid) (apicid & 0xF0) + +static inline int apic_id_registered(void) +{ + return 1; +} + +static inline void init_apic_ldr(void) +{ + /* Already done in NUMA-Q firmware */ +} + +static inline void clustered_apic_check(void) +{ + printk("Enabling APIC mode: %s. Using %d I/O APICs\n", + "NUMA-Q", nr_ioapics); +} + +/* + * Skip adding the timer int on secondary nodes, which causes + * a small but painful rift in the time-space continuum. + */ +static inline int multi_timer_check(int apic, int irq) +{ + return apic != 0 && irq == 0; +} + +static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map) +{ + /* We don't have a good way to do this yet - hack */ + return physids_promote(0xFUL); +} + +/* Mapping from cpu number to logical apicid */ +extern u8 cpu_2_logical_apicid[]; +static inline int cpu_to_logical_apicid(int cpu) +{ + if (cpu >= NR_CPUS) + return BAD_APICID; + return (int)cpu_2_logical_apicid[cpu]; +} + +/* + * Supporting over 60 cpus on NUMA-Q requires a locality-dependent + * cpu to APIC ID relation to properly interact with the intelligent + * mode of the cluster controller. + */ +static inline int cpu_present_to_apicid(int mps_cpu) +{ + if (mps_cpu < 60) + return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3)); + else + return BAD_APICID; +} + +static inline int generate_logical_apicid(int quad, int phys_apicid) +{ + return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1); +} + +static inline int apicid_to_node(int logical_apicid) +{ + return logical_apicid >> 4; +} + +static inline physid_mask_t apicid_to_cpu_present(int logical_apicid) +{ + int node = apicid_to_node(logical_apicid); + int cpu = __ffs(logical_apicid & 0xf); + + return physid_mask_of_physid(cpu + 4*node); +} + +static inline int mpc_apic_id(struct mpc_config_processor *m, + struct mpc_config_translation *translation_record) +{ + int quad = translation_record->trans_quad; + int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid); + + printk("Processor #%d %ld:%ld APIC version %d (quad %d, apic %d)\n", + m->mpc_apicid, + (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8, + (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4, + m->mpc_apicver, quad, logical_apicid); + return logical_apicid; +} + +static inline void setup_portio_remap(void) +{ + int num_quads = num_online_nodes(); + + if (num_quads <= 1) + return; + + printk("Remapping cross-quad port I/O for %d quads\n", num_quads); + xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD); + printk("xquad_portio vaddr 0x%08lx, len %08lx\n", + (u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD); +} + +static inline int check_phys_apicid_present(int boot_cpu_physical_apicid) +{ + return (1); +} + +static inline void enable_apic_mode(void) +{ +} + +/* + * We use physical apicids here, not logical, so just return the default + * physical broadcast to stop people from breaking us + */ +static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask) +{ + return (int) 0xF; +} + +/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */ +static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb) +{ + return cpuid_apic >> index_msb; +} + +#endif /* __ASM_MACH_APIC_H */ diff --git a/include/asm-i386/mach-numaq/mach_apicdef.h b/include/asm-i386/mach-numaq/mach_apicdef.h new file mode 100644 index 00000000000..bf439d0690f --- /dev/null +++ b/include/asm-i386/mach-numaq/mach_apicdef.h @@ -0,0 +1,14 @@ +#ifndef __ASM_MACH_APICDEF_H +#define __ASM_MACH_APICDEF_H + + +#define APIC_ID_MASK (0xF<<24) + +static inline unsigned get_apic_id(unsigned long x) +{ + return (((x)>>24)&0x0F); +} + +#define GET_APIC_ID(x) get_apic_id(x) + +#endif diff --git a/include/asm-i386/mach-numaq/mach_ipi.h b/include/asm-i386/mach-numaq/mach_ipi.h new file mode 100644 index 00000000000..1b46fd3f2ae --- /dev/null +++ b/include/asm-i386/mach-numaq/mach_ipi.h @@ -0,0 +1,25 @@ +#ifndef __ASM_MACH_IPI_H +#define __ASM_MACH_IPI_H + +inline void send_IPI_mask_sequence(cpumask_t, int vector); + +static inline void send_IPI_mask(cpumask_t mask, int vector) +{ + send_IPI_mask_sequence(mask, vector); +} + +static inline void send_IPI_allbutself(int vector) +{ + cpumask_t mask = cpu_online_map; + cpu_clear(smp_processor_id(), mask); + + if (!cpus_empty(mask)) + send_IPI_mask(mask, vector); +} + +static inline void send_IPI_all(int vector) +{ + send_IPI_mask(cpu_online_map, vector); +} + +#endif /* __ASM_MACH_IPI_H */ diff --git a/include/asm-i386/mach-numaq/mach_mpparse.h b/include/asm-i386/mach-numaq/mach_mpparse.h new file mode 100644 index 00000000000..51bbac8fc0c --- /dev/null +++ b/include/asm-i386/mach-numaq/mach_mpparse.h @@ -0,0 +1,29 @@ +#ifndef __ASM_MACH_MPPARSE_H +#define __ASM_MACH_MPPARSE_H + +static inline void mpc_oem_bus_info(struct mpc_config_bus *m, char *name, + struct mpc_config_translation *translation) +{ + int quad = translation->trans_quad; + int local = translation->trans_local; + + mp_bus_id_to_node[m->mpc_busid] = quad; + mp_bus_id_to_local[m->mpc_busid] = local; + printk("Bus #%d is %s (node %d)\n", m->mpc_busid, name, quad); +} + +static inline void mpc_oem_pci_bus(struct mpc_config_bus *m, + struct mpc_config_translation *translation) +{ + int quad = translation->trans_quad; + int local = translation->trans_local; + + quad_local_to_mp_bus_id[quad][local] = m->mpc_busid; +} + +/* Hook from generic ACPI tables.c */ +static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ +} + +#endif /* __ASM_MACH_MPPARSE_H */ diff --git a/include/asm-i386/mach-numaq/mach_mpspec.h b/include/asm-i386/mach-numaq/mach_mpspec.h new file mode 100644 index 00000000000..dffb09856f8 --- /dev/null +++ b/include/asm-i386/mach-numaq/mach_mpspec.h @@ -0,0 +1,8 @@ +#ifndef __ASM_MACH_MPSPEC_H +#define __ASM_MACH_MPSPEC_H + +#define MAX_IRQ_SOURCES 512 + +#define MAX_MP_BUSSES 32 + +#endif /* __ASM_MACH_MPSPEC_H */ diff --git a/include/asm-i386/mach-numaq/mach_wakecpu.h b/include/asm-i386/mach-numaq/mach_wakecpu.h new file mode 100644 index 00000000000..00530041a99 --- /dev/null +++ b/include/asm-i386/mach-numaq/mach_wakecpu.h @@ -0,0 +1,43 @@ +#ifndef __ASM_MACH_WAKECPU_H +#define __ASM_MACH_WAKECPU_H + +/* This file copes with machines that wakeup secondary CPUs by NMIs */ + +#define WAKE_SECONDARY_VIA_NMI + +#define TRAMPOLINE_LOW phys_to_virt(0x8) +#define TRAMPOLINE_HIGH phys_to_virt(0xa) + +#define boot_cpu_apicid boot_cpu_logical_apicid + +/* We don't do anything here because we use NMI's to boot instead */ +static inline void wait_for_init_deassert(atomic_t *deassert) +{ +} + +/* + * Because we use NMIs rather than the INIT-STARTUP sequence to + * bootstrap the CPUs, the APIC may be in a weird state. Kick it. + */ +static inline void smp_callin_clear_local_apic(void) +{ + clear_local_APIC(); +} + +static inline void store_NMI_vector(unsigned short *high, unsigned short *low) +{ + printk("Storing NMI vector\n"); + *high = *((volatile unsigned short *) TRAMPOLINE_HIGH); + *low = *((volatile unsigned short *) TRAMPOLINE_LOW); +} + +static inline void restore_NMI_vector(unsigned short *high, unsigned short *low) +{ + printk("Restoring NMI vector\n"); + *((volatile unsigned short *) TRAMPOLINE_HIGH) = *high; + *((volatile unsigned short *) TRAMPOLINE_LOW) = *low; +} + +#define inquire_remote_apic(apicid) {} + +#endif /* __ASM_MACH_WAKECPU_H */ diff --git a/include/asm-i386/mach-summit/irq_vectors_limits.h b/include/asm-i386/mach-summit/irq_vectors_limits.h new file mode 100644 index 00000000000..890ce3f5e09 --- /dev/null +++ b/include/asm-i386/mach-summit/irq_vectors_limits.h @@ -0,0 +1,14 @@ +#ifndef _ASM_IRQ_VECTORS_LIMITS_H +#define _ASM_IRQ_VECTORS_LIMITS_H + +/* + * For Summit or generic (i.e. installer) kernels, we have lots of I/O APICs, + * even with uni-proc kernels, so use a big array. + * + * This value should be the same in both the generic and summit subarches. + * Change one, change 'em both. + */ +#define NR_IRQS 224 +#define NR_IRQ_VECTORS 1024 + +#endif /* _ASM_IRQ_VECTORS_LIMITS_H */ diff --git a/include/asm-i386/mach-summit/mach_apic.h b/include/asm-i386/mach-summit/mach_apic.h new file mode 100644 index 00000000000..74e9cbc8c01 --- /dev/null +++ b/include/asm-i386/mach-summit/mach_apic.h @@ -0,0 +1,189 @@ +#ifndef __ASM_MACH_APIC_H +#define __ASM_MACH_APIC_H + +#include +#include + +#define esr_disable (1) +#define NO_BALANCE_IRQ (0) + +#define NO_IOAPIC_CHECK (1) /* Don't check I/O APIC ID for xAPIC */ + +/* In clustered mode, the high nibble of APIC ID is a cluster number. + * The low nibble is a 4-bit bitmap. */ +#define XAPIC_DEST_CPUS_SHIFT 4 +#define XAPIC_DEST_CPUS_MASK ((1u << XAPIC_DEST_CPUS_SHIFT) - 1) +#define XAPIC_DEST_CLUSTER_MASK (XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT) + +#define APIC_DFR_VALUE (APIC_DFR_CLUSTER) + +static inline cpumask_t target_cpus(void) +{ + /* CPU_MASK_ALL (0xff) has undefined behaviour with + * dest_LowestPrio mode logical clustered apic interrupt routing + * Just start on cpu 0. IRQ balancing will spread load + */ + return cpumask_of_cpu(0); +} +#define TARGET_CPUS (target_cpus()) + +#define INT_DELIVERY_MODE (dest_LowestPrio) +#define INT_DEST_MODE 1 /* logical delivery broadcast to all procs */ + +static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid) +{ + return 0; +} + +/* we don't use the phys_cpu_present_map to indicate apicid presence */ +static inline unsigned long check_apicid_present(int bit) +{ + return 1; +} + +#define apicid_cluster(apicid) ((apicid) & XAPIC_DEST_CLUSTER_MASK) + +extern u8 bios_cpu_apicid[]; +extern u8 cpu_2_logical_apicid[]; + +static inline void init_apic_ldr(void) +{ + unsigned long val, id; + int i, count; + u8 lid; + u8 my_id = (u8)hard_smp_processor_id(); + u8 my_cluster = (u8)apicid_cluster(my_id); + + /* Create logical APIC IDs by counting CPUs already in cluster. */ + for (count = 0, i = NR_CPUS; --i >= 0; ) { + lid = cpu_2_logical_apicid[i]; + if (lid != BAD_APICID && apicid_cluster(lid) == my_cluster) + ++count; + } + /* We only have a 4 wide bitmap in cluster mode. If a deranged + * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */ + BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT); + id = my_cluster | (1UL << count); + apic_write_around(APIC_DFR, APIC_DFR_VALUE); + val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; + val |= SET_APIC_LOGICAL_ID(id); + apic_write_around(APIC_LDR, val); +} + +static inline int multi_timer_check(int apic, int irq) +{ + return 0; +} + +static inline int apic_id_registered(void) +{ + return 1; +} + +static inline void clustered_apic_check(void) +{ + printk("Enabling APIC mode: Summit. Using %d I/O APICs\n", + nr_ioapics); +} + +static inline int apicid_to_node(int logical_apicid) +{ + return logical_apicid >> 5; /* 2 clusterids per CEC */ +} + +/* Mapping from cpu number to logical apicid */ +static inline int cpu_to_logical_apicid(int cpu) +{ + if (cpu >= NR_CPUS) + return BAD_APICID; + return (int)cpu_2_logical_apicid[cpu]; +} + +static inline int cpu_present_to_apicid(int mps_cpu) +{ + if (mps_cpu < NR_CPUS) + return (int)bios_cpu_apicid[mps_cpu]; + else + return BAD_APICID; +} + +static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_id_map) +{ + /* For clustered we don't have a good way to do this yet - hack */ + return physids_promote(0x0F); +} + +static inline physid_mask_t apicid_to_cpu_present(int apicid) +{ + return physid_mask_of_physid(0); +} + +static inline int mpc_apic_id(struct mpc_config_processor *m, + struct mpc_config_translation *translation_record) +{ + printk("Processor #%d %ld:%ld APIC version %d\n", + m->mpc_apicid, + (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8, + (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4, + m->mpc_apicver); + return (m->mpc_apicid); +} + +static inline void setup_portio_remap(void) +{ +} + +static inline int check_phys_apicid_present(int boot_cpu_physical_apicid) +{ + return 1; +} + +static inline void enable_apic_mode(void) +{ +} + +static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask) +{ + int num_bits_set; + int cpus_found = 0; + int cpu; + int apicid; + + num_bits_set = cpus_weight(cpumask); + /* Return id to all */ + if (num_bits_set == NR_CPUS) + return (int) 0xFF; + /* + * The cpus in the mask must all be on the apic cluster. If are not + * on the same apicid cluster return default value of TARGET_CPUS. + */ + cpu = first_cpu(cpumask); + apicid = cpu_to_logical_apicid(cpu); + while (cpus_found < num_bits_set) { + if (cpu_isset(cpu, cpumask)) { + int new_apicid = cpu_to_logical_apicid(cpu); + if (apicid_cluster(apicid) != + apicid_cluster(new_apicid)){ + printk ("%s: Not a valid mask!\n",__FUNCTION__); + return 0xFF; + } + apicid = apicid | new_apicid; + cpus_found++; + } + cpu++; + } + return apicid; +} + +/* cpuid returns the value latched in the HW at reset, not the APIC ID + * register's value. For any box whose BIOS changes APIC IDs, like + * clustered APIC systems, we must use hard_smp_processor_id. + * + * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID. + */ +static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb) +{ + return hard_smp_processor_id() >> index_msb; +} + +#endif /* __ASM_MACH_APIC_H */ diff --git a/include/asm-i386/mach-summit/mach_apicdef.h b/include/asm-i386/mach-summit/mach_apicdef.h new file mode 100644 index 00000000000..a58ab5a75c8 --- /dev/null +++ b/include/asm-i386/mach-summit/mach_apicdef.h @@ -0,0 +1,13 @@ +#ifndef __ASM_MACH_APICDEF_H +#define __ASM_MACH_APICDEF_H + +#define APIC_ID_MASK (0xFF<<24) + +static inline unsigned get_apic_id(unsigned long x) +{ + return (((x)>>24)&0xFF); +} + +#define GET_APIC_ID(x) get_apic_id(x) + +#endif diff --git a/include/asm-i386/mach-summit/mach_ipi.h b/include/asm-i386/mach-summit/mach_ipi.h new file mode 100644 index 00000000000..9404c535b7e --- /dev/null +++ b/include/asm-i386/mach-summit/mach_ipi.h @@ -0,0 +1,25 @@ +#ifndef __ASM_MACH_IPI_H +#define __ASM_MACH_IPI_H + +void send_IPI_mask_sequence(cpumask_t mask, int vector); + +static inline void send_IPI_mask(cpumask_t mask, int vector) +{ + send_IPI_mask_sequence(mask, vector); +} + +static inline void send_IPI_allbutself(int vector) +{ + cpumask_t mask = cpu_online_map; + cpu_clear(smp_processor_id(), mask); + + if (!cpus_empty(mask)) + send_IPI_mask(mask, vector); +} + +static inline void send_IPI_all(int vector) +{ + send_IPI_mask(cpu_online_map, vector); +} + +#endif /* __ASM_MACH_IPI_H */ diff --git a/include/asm-i386/mach-summit/mach_mpparse.h b/include/asm-i386/mach-summit/mach_mpparse.h new file mode 100644 index 00000000000..2b9e6d55bef --- /dev/null +++ b/include/asm-i386/mach-summit/mach_mpparse.h @@ -0,0 +1,121 @@ +#ifndef __ASM_MACH_MPPARSE_H +#define __ASM_MACH_MPPARSE_H + +#include + +extern int use_cyclone; + +#ifdef CONFIG_X86_SUMMIT_NUMA +extern void setup_summit(void); +#else +#define setup_summit() {} +#endif + +static inline void mpc_oem_bus_info(struct mpc_config_bus *m, char *name, + struct mpc_config_translation *translation) +{ + Dprintk("Bus #%d is %s\n", m->mpc_busid, name); +} + +static inline void mpc_oem_pci_bus(struct mpc_config_bus *m, + struct mpc_config_translation *translation) +{ +} + +extern int usb_early_handoff; +static inline int mps_oem_check(struct mp_config_table *mpc, char *oem, + char *productid) +{ + if (!strncmp(oem, "IBM ENSW", 8) && + (!strncmp(productid, "VIGIL SMP", 9) + || !strncmp(productid, "EXA", 3) + || !strncmp(productid, "RUTHLESS SMP", 12))){ + use_cyclone = 1; /*enable cyclone-timer*/ + setup_summit(); + usb_early_handoff = 1; + return 1; + } + return 0; +} + +/* Hook from generic ACPI tables.c */ +static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ + if (!strncmp(oem_id, "IBM", 3) && + (!strncmp(oem_table_id, "SERVIGIL", 8) + || !strncmp(oem_table_id, "EXA", 3))){ + use_cyclone = 1; /*enable cyclone-timer*/ + setup_summit(); + usb_early_handoff = 1; + return 1; + } + return 0; +} + +struct rio_table_hdr { + unsigned char version; /* Version number of this data structure */ + /* Version 3 adds chassis_num & WP_index */ + unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil) */ + unsigned char num_rio_dev; /* # of RIO I/O devices (Cyclones and Winnipegs) */ +} __attribute__((packed)); + +struct scal_detail { + unsigned char node_id; /* Scalability Node ID */ + unsigned long CBAR; /* Address of 1MB register space */ + unsigned char port0node; /* Node ID port connected to: 0xFF=None */ + unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */ + unsigned char port1node; /* Node ID port connected to: 0xFF = None */ + unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */ + unsigned char port2node; /* Node ID port connected to: 0xFF = None */ + unsigned char port2port; /* Port num port connected to: 0,1,2, or 0xFF=None */ + unsigned char chassis_num; /* 1 based Chassis number (1 = boot node) */ +} __attribute__((packed)); + +struct rio_detail { + unsigned char node_id; /* RIO Node ID */ + unsigned long BBAR; /* Address of 1MB register space */ + unsigned char type; /* Type of device */ + unsigned char owner_id; /* For WPEG: Node ID of Cyclone that owns this WPEG*/ + /* For CYC: Node ID of Twister that owns this CYC */ + unsigned char port0node; /* Node ID port connected to: 0xFF=None */ + unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */ + unsigned char port1node; /* Node ID port connected to: 0xFF=None */ + unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */ + unsigned char first_slot; /* For WPEG: Lowest slot number below this WPEG */ + /* For CYC: 0 */ + unsigned char status; /* For WPEG: Bit 0 = 1 : the XAPIC is used */ + /* = 0 : the XAPIC is not used, ie:*/ + /* ints fwded to another XAPIC */ + /* Bits1:7 Reserved */ + /* For CYC: Bits0:7 Reserved */ + unsigned char WP_index; /* For WPEG: WPEG instance index - lower ones have */ + /* lower slot numbers/PCI bus numbers */ + /* For CYC: No meaning */ + unsigned char chassis_num; /* 1 based Chassis number */ + /* For LookOut WPEGs this field indicates the */ + /* Expansion Chassis #, enumerated from Boot */ + /* Node WPEG external port, then Boot Node CYC */ + /* external port, then Next Vigil chassis WPEG */ + /* external port, etc. */ + /* Shared Lookouts have only 1 chassis number (the */ + /* first one assigned) */ +} __attribute__((packed)); + + +typedef enum { + CompatTwister = 0, /* Compatibility Twister */ + AltTwister = 1, /* Alternate Twister of internal 8-way */ + CompatCyclone = 2, /* Compatibility Cyclone */ + AltCyclone = 3, /* Alternate Cyclone of internal 8-way */ + CompatWPEG = 4, /* Compatibility WPEG */ + AltWPEG = 5, /* Second Planar WPEG */ + LookOutAWPEG = 6, /* LookOut WPEG */ + LookOutBWPEG = 7, /* LookOut WPEG */ +} node_type; + +static inline int is_WPEG(struct rio_detail *rio){ + return (rio->type == CompatWPEG || rio->type == AltWPEG || + rio->type == LookOutAWPEG || rio->type == LookOutBWPEG); +} + +#endif /* __ASM_MACH_MPPARSE_H */ diff --git a/include/asm-i386/mach-summit/mach_mpspec.h b/include/asm-i386/mach-summit/mach_mpspec.h new file mode 100644 index 00000000000..bd765523511 --- /dev/null +++ b/include/asm-i386/mach-summit/mach_mpspec.h @@ -0,0 +1,9 @@ +#ifndef __ASM_MACH_MPSPEC_H +#define __ASM_MACH_MPSPEC_H + +#define MAX_IRQ_SOURCES 256 + +/* Maximum 256 PCI busses, plus 1 ISA bus in each of 4 cabinets. */ +#define MAX_MP_BUSSES 260 + +#endif /* __ASM_MACH_MPSPEC_H */ diff --git a/include/asm-i386/mach-visws/cobalt.h b/include/asm-i386/mach-visws/cobalt.h new file mode 100644 index 00000000000..33c36225a04 --- /dev/null +++ b/include/asm-i386/mach-visws/cobalt.h @@ -0,0 +1,125 @@ +#ifndef __I386_SGI_COBALT_H +#define __I386_SGI_COBALT_H + +#include + +/* + * Cobalt SGI Visual Workstation system ASIC + */ + +#define CO_CPU_NUM_PHYS 0x1e00 +#define CO_CPU_TAB_PHYS (CO_CPU_NUM_PHYS + 2) + +#define CO_CPU_MAX 4 + +#define CO_CPU_PHYS 0xc2000000 +#define CO_APIC_PHYS 0xc4000000 + +/* see set_fixmap() and asm/fixmap.h */ +#define CO_CPU_VADDR (fix_to_virt(FIX_CO_CPU)) +#define CO_APIC_VADDR (fix_to_virt(FIX_CO_APIC)) + +/* Cobalt CPU registers -- relative to CO_CPU_VADDR, use co_cpu_*() */ +#define CO_CPU_REV 0x08 +#define CO_CPU_CTRL 0x10 +#define CO_CPU_STAT 0x20 +#define CO_CPU_TIMEVAL 0x30 + +/* CO_CPU_CTRL bits */ +#define CO_CTRL_TIMERUN 0x04 /* 0 == disabled */ +#define CO_CTRL_TIMEMASK 0x08 /* 0 == unmasked */ + +/* CO_CPU_STATUS bits */ +#define CO_STAT_TIMEINTR 0x02 /* (r) 1 == int pend, (w) 0 == clear */ + +/* CO_CPU_TIMEVAL value */ +#define CO_TIME_HZ 100000000 /* Cobalt core rate */ + +/* Cobalt APIC registers -- relative to CO_APIC_VADDR, use co_apic_*() */ +#define CO_APIC_HI(n) (((n) * 0x10) + 4) +#define CO_APIC_LO(n) ((n) * 0x10) +#define CO_APIC_ID 0x0ffc + +/* CO_APIC_ID bits */ +#define CO_APIC_ENABLE 0x00000100 + +/* CO_APIC_LO bits */ +#define CO_APIC_MASK 0x00010000 /* 0 = enabled */ +#define CO_APIC_LEVEL 0x00008000 /* 0 = edge */ + +/* + * Where things are physically wired to Cobalt + * #defines with no board ___ are common to all (thus far) + */ +#define CO_APIC_IDE0 4 +#define CO_APIC_IDE1 2 /* Only on 320 */ + +#define CO_APIC_8259 12 /* serial, floppy, par-l-l */ + +/* Lithium PCI Bridge A -- "the one with 82557 Ethernet" */ +#define CO_APIC_PCIA_BASE0 0 /* and 1 */ /* slot 0, line 0 */ +#define CO_APIC_PCIA_BASE123 5 /* and 6 */ /* slot 0, line 1 */ + +#define CO_APIC_PIIX4_USB 7 /* this one is weird */ + +/* Lithium PCI Bridge B -- "the one with PIIX4" */ +#define CO_APIC_PCIB_BASE0 8 /* and 9-12 *//* slot 0, line 0 */ +#define CO_APIC_PCIB_BASE123 13 /* 14.15 */ /* slot 0, line 1 */ + +#define CO_APIC_VIDOUT0 16 +#define CO_APIC_VIDOUT1 17 +#define CO_APIC_VIDIN0 18 +#define CO_APIC_VIDIN1 19 + +#define CO_APIC_LI_AUDIO 22 + +#define CO_APIC_AS 24 +#define CO_APIC_RE 25 + +#define CO_APIC_CPU 28 /* Timer and Cache interrupt */ +#define CO_APIC_NMI 29 +#define CO_APIC_LAST CO_APIC_NMI + +/* + * This is how irqs are assigned on the Visual Workstation. + * Legacy devices get irq's 1-15 (system clock is 0 and is CO_APIC_CPU). + * All other devices (including PCI) go to Cobalt and are irq's 16 on up. + */ +#define CO_IRQ_APIC0 16 /* irq of apic entry 0 */ +#define IS_CO_APIC(irq) ((irq) >= CO_IRQ_APIC0) +#define CO_IRQ(apic) (CO_IRQ_APIC0 + (apic)) /* apic ent to irq */ +#define CO_APIC(irq) ((irq) - CO_IRQ_APIC0) /* irq to apic ent */ +#define CO_IRQ_IDE0 14 /* knowledge of... */ +#define CO_IRQ_IDE1 15 /* ... ide driver defaults! */ +#define CO_IRQ_8259 CO_IRQ(CO_APIC_8259) + +#ifdef CONFIG_X86_VISWS_APIC +extern __inline void co_cpu_write(unsigned long reg, unsigned long v) +{ + *((volatile unsigned long *)(CO_CPU_VADDR+reg))=v; +} + +extern __inline unsigned long co_cpu_read(unsigned long reg) +{ + return *((volatile unsigned long *)(CO_CPU_VADDR+reg)); +} + +extern __inline void co_apic_write(unsigned long reg, unsigned long v) +{ + *((volatile unsigned long *)(CO_APIC_VADDR+reg))=v; +} + +extern __inline unsigned long co_apic_read(unsigned long reg) +{ + return *((volatile unsigned long *)(CO_APIC_VADDR+reg)); +} +#endif + +extern char visws_board_type; + +#define VISWS_320 0 +#define VISWS_540 1 + +extern char visws_board_rev; + +#endif /* __I386_SGI_COBALT_H */ diff --git a/include/asm-i386/mach-visws/do_timer.h b/include/asm-i386/mach-visws/do_timer.h new file mode 100644 index 00000000000..33acd50fd9a --- /dev/null +++ b/include/asm-i386/mach-visws/do_timer.h @@ -0,0 +1,52 @@ +/* defines for inline arch setup functions */ + +#include +#include "cobalt.h" + +static inline void do_timer_interrupt_hook(struct pt_regs *regs) +{ + /* Clear the interrupt */ + co_cpu_write(CO_CPU_STAT,co_cpu_read(CO_CPU_STAT) & ~CO_STAT_TIMEINTR); + + do_timer(regs); +#ifndef CONFIG_SMP + update_process_times(user_mode(regs)); +#endif +/* + * In the SMP case we use the local APIC timer interrupt to do the + * profiling, except when we simulate SMP mode on a uniprocessor + * system, in that case we have to call the local interrupt handler. + */ +#ifndef CONFIG_X86_LOCAL_APIC + profile_tick(CPU_PROFILING, regs); +#else + if (!using_apic_timer) + smp_local_timer_interrupt(regs); +#endif +} + +static inline int do_timer_overflow(int count) +{ + int i; + + spin_lock(&i8259A_lock); + /* + * This is tricky when I/O APICs are used; + * see do_timer_interrupt(). + */ + i = inb(0x20); + spin_unlock(&i8259A_lock); + + /* assumption about timer being IRQ0 */ + if (i & 0x01) { + /* + * We cannot detect lost timer interrupts ... + * well, that's why we call them lost, don't we? :) + * [hmm, on the Pentium and Alpha we can ... sort of] + */ + count -= LATCH; + } else { + printk("do_slow_gettimeoffset(): hardware timer problem?\n"); + } + return count; +} diff --git a/include/asm-i386/mach-visws/entry_arch.h b/include/asm-i386/mach-visws/entry_arch.h new file mode 100644 index 00000000000..b183fa6d83d --- /dev/null +++ b/include/asm-i386/mach-visws/entry_arch.h @@ -0,0 +1,23 @@ +/* + * The following vectors are part of the Linux architecture, there + * is no hardware IRQ pin equivalent for them, they are triggered + * through the ICC by us (IPIs) + */ +#ifdef CONFIG_X86_SMP +BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR) +BUILD_INTERRUPT(invalidate_interrupt,INVALIDATE_TLB_VECTOR) +BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR) +#endif + +/* + * every pentium local APIC has two 'local interrupts', with a + * soft-definable vector attached to both interrupts, one of + * which is a timer interrupt, the other one is error counter + * overflow. Linux uses the local APIC timer interrupt to get + * a much simpler SMP time architecture: + */ +#ifdef CONFIG_X86_LOCAL_APIC +BUILD_INTERRUPT(apic_timer_interrupt,LOCAL_TIMER_VECTOR) +BUILD_INTERRUPT(error_interrupt,ERROR_APIC_VECTOR) +BUILD_INTERRUPT(spurious_interrupt,SPURIOUS_APIC_VECTOR) +#endif diff --git a/include/asm-i386/mach-visws/irq_vectors.h b/include/asm-i386/mach-visws/irq_vectors.h new file mode 100644 index 00000000000..cb572d8db50 --- /dev/null +++ b/include/asm-i386/mach-visws/irq_vectors.h @@ -0,0 +1,62 @@ +#ifndef _ASM_IRQ_VECTORS_H +#define _ASM_IRQ_VECTORS_H + +/* + * IDT vectors usable for external interrupt sources start + * at 0x20: + */ +#define FIRST_EXTERNAL_VECTOR 0x20 + +#define SYSCALL_VECTOR 0x80 + +/* + * Vectors 0x20-0x2f are used for ISA interrupts. + */ + +/* + * Special IRQ vectors used by the SMP architecture, 0xf0-0xff + * + * some of the following vectors are 'rare', they are merged + * into a single vector (CALL_FUNCTION_VECTOR) to save vector space. + * TLB, reschedule and local APIC vectors are performance-critical. + * + * Vectors 0xf0-0xfa are free (reserved for future Linux use). + */ +#define SPURIOUS_APIC_VECTOR 0xff +#define ERROR_APIC_VECTOR 0xfe +#define INVALIDATE_TLB_VECTOR 0xfd +#define RESCHEDULE_VECTOR 0xfc +#define CALL_FUNCTION_VECTOR 0xfb + +#define THERMAL_APIC_VECTOR 0xf0 +/* + * Local APIC timer IRQ vector is on a different priority level, + * to work around the 'lost local interrupt if more than 2 IRQ + * sources per level' errata. + */ +#define LOCAL_TIMER_VECTOR 0xef + +/* + * First APIC vector available to drivers: (vectors 0x30-0xee) + * we start at 0x31 to spread out vectors evenly between priority + * levels. (0x80 is the syscall vector) + */ +#define FIRST_DEVICE_VECTOR 0x31 +#define FIRST_SYSTEM_VECTOR 0xef + +#define TIMER_IRQ 0 + +/* + * IRQ definitions + */ +#define NR_VECTORS 256 +#define NR_IRQS 224 +#define NR_IRQ_VECTORS NR_IRQS + +#define FPU_IRQ 13 + +#define FIRST_VM86_IRQ 3 +#define LAST_VM86_IRQ 15 +#define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15) + +#endif /* _ASM_IRQ_VECTORS_H */ diff --git a/include/asm-i386/mach-visws/lithium.h b/include/asm-i386/mach-visws/lithium.h new file mode 100644 index 00000000000..d443e68d006 --- /dev/null +++ b/include/asm-i386/mach-visws/lithium.h @@ -0,0 +1,53 @@ +#ifndef __I386_SGI_LITHIUM_H +#define __I386_SGI_LITHIUM_H + +#include + +/* + * Lithium is the SGI Visual Workstation I/O ASIC + */ + +#define LI_PCI_A_PHYS 0xfc000000 /* Enet is dev 3 */ +#define LI_PCI_B_PHYS 0xfd000000 /* PIIX4 is here */ + +/* see set_fixmap() and asm/fixmap.h */ +#define LI_PCIA_VADDR (fix_to_virt(FIX_LI_PCIA)) +#define LI_PCIB_VADDR (fix_to_virt(FIX_LI_PCIB)) + +/* Not a standard PCI? (not in linux/pci.h) */ +#define LI_PCI_BUSNUM 0x44 /* lo8: primary, hi8: sub */ +#define LI_PCI_INTEN 0x46 + +/* LI_PCI_INTENT bits */ +#define LI_INTA_0 0x0001 +#define LI_INTA_1 0x0002 +#define LI_INTA_2 0x0004 +#define LI_INTA_3 0x0008 +#define LI_INTA_4 0x0010 +#define LI_INTB 0x0020 +#define LI_INTC 0x0040 +#define LI_INTD 0x0080 + +/* More special purpose macros... */ +extern __inline void li_pcia_write16(unsigned long reg, unsigned short v) +{ + *((volatile unsigned short *)(LI_PCIA_VADDR+reg))=v; +} + +extern __inline unsigned short li_pcia_read16(unsigned long reg) +{ + return *((volatile unsigned short *)(LI_PCIA_VADDR+reg)); +} + +extern __inline void li_pcib_write16(unsigned long reg, unsigned short v) +{ + *((volatile unsigned short *)(LI_PCIB_VADDR+reg))=v; +} + +extern __inline unsigned short li_pcib_read16(unsigned long reg) +{ + return *((volatile unsigned short *)(LI_PCIB_VADDR+reg)); +} + +#endif + diff --git a/include/asm-i386/mach-visws/mach_apic.h b/include/asm-i386/mach-visws/mach_apic.h new file mode 100644 index 00000000000..4e6cdfb8b09 --- /dev/null +++ b/include/asm-i386/mach-visws/mach_apic.h @@ -0,0 +1,100 @@ +#ifndef __ASM_MACH_APIC_H +#define __ASM_MACH_APIC_H + +#include +#include + +#define APIC_DFR_VALUE (APIC_DFR_FLAT) + +#define no_balance_irq (0) +#define esr_disable (0) + +#define NO_IOAPIC_CHECK (0) + +#define INT_DELIVERY_MODE dest_LowestPrio +#define INT_DEST_MODE 1 /* logical delivery broadcast to all procs */ + +#ifdef CONFIG_SMP + #define TARGET_CPUS cpu_online_map +#else + #define TARGET_CPUS cpumask_of_cpu(0) +#endif + +#define check_apicid_used(bitmap, apicid) physid_isset(apicid, bitmap) +#define check_apicid_present(bit) physid_isset(bit, phys_cpu_present_map) + +static inline int apic_id_registered(void) +{ + return physid_isset(GET_APIC_ID(apic_read(APIC_ID)), phys_cpu_present_map); +} + +/* + * Set up the logical destination ID. + * + * Intel recommends to set DFR, LDR and TPR before enabling + * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel + * document number 292116). So here it goes... + */ +static inline void init_apic_ldr(void) +{ + unsigned long val; + + apic_write_around(APIC_DFR, APIC_DFR_VALUE); + val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; + val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id()); + apic_write_around(APIC_LDR, val); +} + +static inline void summit_check(char *oem, char *productid) +{ +} + +static inline void clustered_apic_check(void) +{ +} + +/* Mapping from cpu number to logical apicid */ +static inline int cpu_to_logical_apicid(int cpu) +{ + return 1 << cpu; +} + +static inline int cpu_present_to_apicid(int mps_cpu) +{ + if (mps_cpu < get_physical_broadcast()) + return mps_cpu; + else + return BAD_APICID; +} + +static inline physid_mask_t apicid_to_cpu_present(int apicid) +{ + return physid_mask_of_physid(apicid); +} + +#define WAKE_SECONDARY_VIA_INIT + +static inline void setup_portio_remap(void) +{ +} + +static inline void enable_apic_mode(void) +{ +} + +static inline int check_phys_apicid_present(int boot_cpu_physical_apicid) +{ + return physid_isset(boot_cpu_physical_apicid, phys_cpu_present_map); +} + +static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask) +{ + return cpus_addr(cpumask)[0]; +} + +static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb) +{ + return cpuid_apic >> index_msb; +} + +#endif /* __ASM_MACH_APIC_H */ diff --git a/include/asm-i386/mach-visws/mach_apicdef.h b/include/asm-i386/mach-visws/mach_apicdef.h new file mode 100644 index 00000000000..826cfa97d77 --- /dev/null +++ b/include/asm-i386/mach-visws/mach_apicdef.h @@ -0,0 +1,12 @@ +#ifndef __ASM_MACH_APICDEF_H +#define __ASM_MACH_APICDEF_H + +#define APIC_ID_MASK (0xF<<24) + +static inline unsigned get_apic_id(unsigned long x) +{ + return (((x)>>24)&0xF); +} +#define GET_APIC_ID(x) get_apic_id(x) + +#endif diff --git a/include/asm-i386/mach-visws/piix4.h b/include/asm-i386/mach-visws/piix4.h new file mode 100644 index 00000000000..83ea4f46e41 --- /dev/null +++ b/include/asm-i386/mach-visws/piix4.h @@ -0,0 +1,107 @@ +#ifndef __I386_SGI_PIIX_H +#define __I386_SGI_PIIX_H + +/* + * PIIX4 as used on SGI Visual Workstations + */ + +#define PIIX_PM_START 0x0F80 + +#define SIO_GPIO_START 0x0FC0 + +#define SIO_PM_START 0x0FC8 + +#define PMBASE PIIX_PM_START +#define GPIREG0 (PMBASE+0x30) +#define GPIREG(x) (GPIREG0+((x)/8)) +#define GPIBIT(x) (1 << ((x)%8)) + +#define PIIX_GPI_BD_ID1 18 +#define PIIX_GPI_BD_ID2 19 +#define PIIX_GPI_BD_ID3 20 +#define PIIX_GPI_BD_ID4 21 +#define PIIX_GPI_BD_REG GPIREG(PIIX_GPI_BD_ID1) +#define PIIX_GPI_BD_MASK (GPIBIT(PIIX_GPI_BD_ID1) | \ + GPIBIT(PIIX_GPI_BD_ID2) | \ + GPIBIT(PIIX_GPI_BD_ID3) | \ + GPIBIT(PIIX_GPI_BD_ID4) ) + +#define PIIX_GPI_BD_SHIFT (PIIX_GPI_BD_ID1 % 8) + +#define SIO_INDEX 0x2e +#define SIO_DATA 0x2f + +#define SIO_DEV_SEL 0x7 +#define SIO_DEV_ENB 0x30 +#define SIO_DEV_MSB 0x60 +#define SIO_DEV_LSB 0x61 + +#define SIO_GP_DEV 0x7 + +#define SIO_GP_BASE SIO_GPIO_START +#define SIO_GP_MSB (SIO_GP_BASE>>8) +#define SIO_GP_LSB (SIO_GP_BASE&0xff) + +#define SIO_GP_DATA1 (SIO_GP_BASE+0) + +#define SIO_PM_DEV 0x8 + +#define SIO_PM_BASE SIO_PM_START +#define SIO_PM_MSB (SIO_PM_BASE>>8) +#define SIO_PM_LSB (SIO_PM_BASE&0xff) +#define SIO_PM_INDEX (SIO_PM_BASE+0) +#define SIO_PM_DATA (SIO_PM_BASE+1) + +#define SIO_PM_FER2 0x1 + +#define SIO_PM_GP_EN 0x80 + + + +/* + * This is the dev/reg where generating a config cycle will + * result in a PCI special cycle. + */ +#define SPECIAL_DEV 0xff +#define SPECIAL_REG 0x00 + +/* + * PIIX4 needs to see a special cycle with the following data + * to be convinced the processor has gone into the stop grant + * state. PIIX4 insists on seeing this before it will power + * down a system. + */ +#define PIIX_SPECIAL_STOP 0x00120002 + +#define PIIX4_RESET_PORT 0xcf9 +#define PIIX4_RESET_VAL 0x6 + +#define PMSTS_PORT 0xf80 // 2 bytes PM Status +#define PMEN_PORT 0xf82 // 2 bytes PM Enable +#define PMCNTRL_PORT 0xf84 // 2 bytes PM Control + +#define PM_SUSPEND_ENABLE 0x2000 // start sequence to suspend state + +/* + * PMSTS and PMEN I/O bit definitions. + * (Bits are the same in both registers) + */ +#define PM_STS_RSM (1<<15) // Resume Status +#define PM_STS_PWRBTNOR (1<<11) // Power Button Override +#define PM_STS_RTC (1<<10) // RTC status +#define PM_STS_PWRBTN (1<<8) // Power Button Pressed? +#define PM_STS_GBL (1<<5) // Global Status +#define PM_STS_BM (1<<4) // Bus Master Status +#define PM_STS_TMROF (1<<0) // Timer Overflow Status. + +/* + * Stop clock GPI register + */ +#define PIIX_GPIREG0 (0xf80 + 0x30) + +/* + * Stop clock GPI bit in GPIREG0 + */ +#define PIIX_GPI_STPCLK 0x4 // STPCLK signal routed back in + +#endif diff --git a/include/asm-i386/mach-visws/setup_arch_post.h b/include/asm-i386/mach-visws/setup_arch_post.h new file mode 100644 index 00000000000..cdbd895a54b --- /dev/null +++ b/include/asm-i386/mach-visws/setup_arch_post.h @@ -0,0 +1,49 @@ +/* Hook for machine specific memory setup. + * + * This is included late in kernel/setup.c so that it can make use of all of + * the static functions. */ + +#define MB (1024 * 1024) + +unsigned long sgivwfb_mem_phys; +unsigned long sgivwfb_mem_size; + +long long mem_size __initdata = 0; + +static char * __init machine_specific_memory_setup(void) +{ + long long gfx_mem_size = 8 * MB; + + mem_size = ALT_MEM_K; + + if (!mem_size) { + printk(KERN_WARNING "Bootloader didn't set memory size, upgrade it !\n"); + mem_size = 128 * MB; + } + + /* + * this hardcodes the graphics memory to 8 MB + * it really should be sized dynamically (or at least + * set as a boot param) + */ + if (!sgivwfb_mem_size) { + printk(KERN_WARNING "Defaulting to 8 MB framebuffer size\n"); + sgivwfb_mem_size = 8 * MB; + } + + /* + * Trim to nearest MB + */ + sgivwfb_mem_size &= ~((1 << 20) - 1); + sgivwfb_mem_phys = mem_size - gfx_mem_size; + + add_memory_region(0, LOWMEMSIZE(), E820_RAM); + add_memory_region(HIGH_MEMORY, mem_size - sgivwfb_mem_size - HIGH_MEMORY, E820_RAM); + add_memory_region(sgivwfb_mem_phys, sgivwfb_mem_size, E820_RESERVED); + + return "PROM"; + + /* Remove gcc warnings */ + (void) sanitize_e820_map(NULL, NULL); + (void) copy_e820_map(NULL, 0); +} diff --git a/include/asm-i386/mach-visws/setup_arch_pre.h b/include/asm-i386/mach-visws/setup_arch_pre.h new file mode 100644 index 00000000000..b92d6d9a4d3 --- /dev/null +++ b/include/asm-i386/mach-visws/setup_arch_pre.h @@ -0,0 +1,5 @@ +/* Hook to call BIOS initialisation function */ + +/* no action for visws */ + +#define ARCH_SETUP diff --git a/include/asm-i386/mach-visws/smpboot_hooks.h b/include/asm-i386/mach-visws/smpboot_hooks.h new file mode 100644 index 00000000000..d926471fa35 --- /dev/null +++ b/include/asm-i386/mach-visws/smpboot_hooks.h @@ -0,0 +1,24 @@ +static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip) +{ + CMOS_WRITE(0xa, 0xf); + local_flush_tlb(); + Dprintk("1.\n"); + *((volatile unsigned short *) TRAMPOLINE_HIGH) = start_eip >> 4; + Dprintk("2.\n"); + *((volatile unsigned short *) TRAMPOLINE_LOW) = start_eip & 0xf; + Dprintk("3.\n"); +} + +/* for visws do nothing for any of these */ + +static inline void smpboot_clear_io_apic_irqs(void) +{ +} + +static inline void smpboot_restore_warm_reset_vector(void) +{ +} + +static inline void smpboot_setup_io_apic(void) +{ +} diff --git a/include/asm-i386/mach-voyager/do_timer.h b/include/asm-i386/mach-voyager/do_timer.h new file mode 100644 index 00000000000..ae510e5d0d7 --- /dev/null +++ b/include/asm-i386/mach-voyager/do_timer.h @@ -0,0 +1,25 @@ +/* defines for inline arch setup functions */ +#include + +static inline void do_timer_interrupt_hook(struct pt_regs *regs) +{ + do_timer(regs); +#ifndef CONFIG_SMP + update_process_times(user_mode(regs)); +#endif + + voyager_timer_interrupt(regs); +} + +static inline int do_timer_overflow(int count) +{ + /* can't read the ISR, just assume 1 tick + overflow */ + if(count > LATCH || count < 0) { + printk(KERN_ERR "VOYAGER PROBLEM: count is %d, latch is %d\n", count, LATCH); + count = LATCH; + } + count -= LATCH; + + return count; +} diff --git a/include/asm-i386/mach-voyager/entry_arch.h b/include/asm-i386/mach-voyager/entry_arch.h new file mode 100644 index 00000000000..4a1e1e8c10b --- /dev/null +++ b/include/asm-i386/mach-voyager/entry_arch.h @@ -0,0 +1,26 @@ +/* -*- mode: c; c-basic-offset: 8 -*- */ + +/* Copyright (C) 2002 + * + * Author: James.Bottomley@HansenPartnership.com + * + * linux/arch/i386/voyager/entry_arch.h + * + * This file builds the VIC and QIC CPI gates + */ + +/* initialise the voyager interrupt gates + * + * This uses the macros in irq.h to set up assembly jump gates. The + * calls are then redirected to the same routine with smp_ prefixed */ +BUILD_INTERRUPT(vic_sys_interrupt, VIC_SYS_INT) +BUILD_INTERRUPT(vic_cmn_interrupt, VIC_CMN_INT) +BUILD_INTERRUPT(vic_cpi_interrupt, VIC_CPI_LEVEL0); + +/* do all the QIC interrupts */ +BUILD_INTERRUPT(qic_timer_interrupt, QIC_TIMER_CPI); +BUILD_INTERRUPT(qic_invalidate_interrupt, QIC_INVALIDATE_CPI); +BUILD_INTERRUPT(qic_reschedule_interrupt, QIC_RESCHEDULE_CPI); +BUILD_INTERRUPT(qic_enable_irq_interrupt, QIC_ENABLE_IRQ_CPI); +BUILD_INTERRUPT(qic_call_function_interrupt, QIC_CALL_FUNCTION_CPI); + diff --git a/include/asm-i386/mach-voyager/irq_vectors.h b/include/asm-i386/mach-voyager/irq_vectors.h new file mode 100644 index 00000000000..165421f5821 --- /dev/null +++ b/include/asm-i386/mach-voyager/irq_vectors.h @@ -0,0 +1,79 @@ +/* -*- mode: c; c-basic-offset: 8 -*- */ + +/* Copyright (C) 2002 + * + * Author: James.Bottomley@HansenPartnership.com + * + * linux/arch/i386/voyager/irq_vectors.h + * + * This file provides definitions for the VIC and QIC CPIs + */ + +#ifndef _ASM_IRQ_VECTORS_H +#define _ASM_IRQ_VECTORS_H + +/* + * IDT vectors usable for external interrupt sources start + * at 0x20: + */ +#define FIRST_EXTERNAL_VECTOR 0x20 + +#define SYSCALL_VECTOR 0x80 + +/* + * Vectors 0x20-0x2f are used for ISA interrupts. + */ + +/* These define the CPIs we use in linux */ +#define VIC_CPI_LEVEL0 0 +#define VIC_CPI_LEVEL1 1 +/* now the fake CPIs */ +#define VIC_TIMER_CPI 2 +#define VIC_INVALIDATE_CPI 3 +#define VIC_RESCHEDULE_CPI 4 +#define VIC_ENABLE_IRQ_CPI 5 +#define VIC_CALL_FUNCTION_CPI 6 + +/* Now the QIC CPIs: Since we don't need the two initial levels, + * these are 2 less than the VIC CPIs */ +#define QIC_CPI_OFFSET 1 +#define QIC_TIMER_CPI (VIC_TIMER_CPI - QIC_CPI_OFFSET) +#define QIC_INVALIDATE_CPI (VIC_INVALIDATE_CPI - QIC_CPI_OFFSET) +#define QIC_RESCHEDULE_CPI (VIC_RESCHEDULE_CPI - QIC_CPI_OFFSET) +#define QIC_ENABLE_IRQ_CPI (VIC_ENABLE_IRQ_CPI - QIC_CPI_OFFSET) +#define QIC_CALL_FUNCTION_CPI (VIC_CALL_FUNCTION_CPI - QIC_CPI_OFFSET) + +#define VIC_START_FAKE_CPI VIC_TIMER_CPI +#define VIC_END_FAKE_CPI VIC_CALL_FUNCTION_CPI + +/* this is the SYS_INT CPI. */ +#define VIC_SYS_INT 8 +#define VIC_CMN_INT 15 + +/* This is the boot CPI for alternate processors. It gets overwritten + * by the above once the system has activated all available processors */ +#define VIC_CPU_BOOT_CPI VIC_CPI_LEVEL0 +#define VIC_CPU_BOOT_ERRATA_CPI (VIC_CPI_LEVEL0 + 8) + +#define NR_VECTORS 256 +#define NR_IRQS 224 +#define NR_IRQ_VECTORS NR_IRQS + +#define FPU_IRQ 13 + +#define FIRST_VM86_IRQ 3 +#define LAST_VM86_IRQ 15 +#define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15) + +#ifndef __ASSEMBLY__ +extern asmlinkage void vic_cpi_interrupt(void); +extern asmlinkage void vic_sys_interrupt(void); +extern asmlinkage void vic_cmn_interrupt(void); +extern asmlinkage void qic_timer_interrupt(void); +extern asmlinkage void qic_invalidate_interrupt(void); +extern asmlinkage void qic_reschedule_interrupt(void); +extern asmlinkage void qic_enable_irq_interrupt(void); +extern asmlinkage void qic_call_function_interrupt(void); +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_IRQ_VECTORS_H */ diff --git a/include/asm-i386/mach-voyager/setup_arch_post.h b/include/asm-i386/mach-voyager/setup_arch_post.h new file mode 100644 index 00000000000..f6f6c2cbc75 --- /dev/null +++ b/include/asm-i386/mach-voyager/setup_arch_post.h @@ -0,0 +1,73 @@ +/* Hook for machine specific memory setup. + * + * This is included late in kernel/setup.c so that it can make use of all of + * the static functions. */ + +static char * __init machine_specific_memory_setup(void) +{ + char *who; + + who = "NOT VOYAGER"; + + if(voyager_level == 5) { + __u32 addr, length; + int i; + + who = "Voyager-SUS"; + + e820.nr_map = 0; + for(i=0; voyager_memory_detect(i, &addr, &length); i++) { + add_memory_region(addr, length, E820_RAM); + } + return who; + } else if(voyager_level == 4) { + __u32 tom; + __u16 catbase = inb(VOYAGER_SSPB_RELOCATION_PORT)<<8; + /* select the DINO config space */ + outb(VOYAGER_DINO, VOYAGER_CAT_CONFIG_PORT); + /* Read DINO top of memory register */ + tom = ((inb(catbase + 0x4) & 0xf0) << 16) + + ((inb(catbase + 0x5) & 0x7f) << 24); + + if(inb(catbase) != VOYAGER_DINO) { + printk(KERN_ERR "Voyager: Failed to get DINO for L4, setting tom to EXT_MEM_K\n"); + tom = (EXT_MEM_K)<<10; + } + who = "Voyager-TOM"; + add_memory_region(0, 0x9f000, E820_RAM); + /* map from 1M to top of memory */ + add_memory_region(1*1024*1024, tom - 1*1024*1024, E820_RAM); + /* FIXME: Should check the ASICs to see if I need to + * take out the 8M window. Just do it at the moment + * */ + add_memory_region(8*1024*1024, 8*1024*1024, E820_RESERVED); + return who; + } + + who = "BIOS-e820"; + + /* + * Try to copy the BIOS-supplied E820-map. + * + * Otherwise fake a memory map; one section from 0k->640k, + * the next section from 1mb->appropriate_mem_k + */ + sanitize_e820_map(E820_MAP, &E820_MAP_NR); + if (copy_e820_map(E820_MAP, E820_MAP_NR) < 0) { + unsigned long mem_size; + + /* compare results from other methods and take the greater */ + if (ALT_MEM_K < EXT_MEM_K) { + mem_size = EXT_MEM_K; + who = "BIOS-88"; + } else { + mem_size = ALT_MEM_K; + who = "BIOS-e801"; + } + + e820.nr_map = 0; + add_memory_region(0, LOWMEMSIZE(), E820_RAM); + add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM); + } + return who; +} diff --git a/include/asm-i386/mach-voyager/setup_arch_pre.h b/include/asm-i386/mach-voyager/setup_arch_pre.h new file mode 100644 index 00000000000..48f7e6ff49a --- /dev/null +++ b/include/asm-i386/mach-voyager/setup_arch_pre.h @@ -0,0 +1,10 @@ +#include +#define VOYAGER_BIOS_INFO ((struct voyager_bios_info *)(PARAM+0x40)) + +/* Hook to call BIOS initialisation function */ + +/* for voyager, pass the voyager BIOS/SUS info area to the detection + * routines */ + +#define ARCH_SETUP voyager_detect(VOYAGER_BIOS_INFO); + diff --git a/include/asm-i386/math_emu.h b/include/asm-i386/math_emu.h new file mode 100644 index 00000000000..697673b555c --- /dev/null +++ b/include/asm-i386/math_emu.h @@ -0,0 +1,35 @@ +#ifndef _I386_MATH_EMU_H +#define _I386_MATH_EMU_H + +#include + +int restore_i387_soft(void *s387, struct _fpstate __user *buf); +int save_i387_soft(void *s387, struct _fpstate __user *buf); + +/* This structure matches the layout of the data saved to the stack + following a device-not-present interrupt, part of it saved + automatically by the 80386/80486. + */ +struct info { + long ___orig_eip; + long ___ebx; + long ___ecx; + long ___edx; + long ___esi; + long ___edi; + long ___ebp; + long ___eax; + long ___ds; + long ___es; + long ___orig_eax; + long ___eip; + long ___cs; + long ___eflags; + long ___esp; + long ___ss; + long ___vm86_es; /* This and the following only in vm86 mode */ + long ___vm86_ds; + long ___vm86_fs; + long ___vm86_gs; +}; +#endif diff --git a/include/asm-i386/mc146818rtc.h b/include/asm-i386/mc146818rtc.h new file mode 100644 index 00000000000..99a89004702 --- /dev/null +++ b/include/asm-i386/mc146818rtc.h @@ -0,0 +1,94 @@ +/* + * Machine dependent access functions for RTC registers. + */ +#ifndef _ASM_MC146818RTC_H +#define _ASM_MC146818RTC_H + +#include +#include +#include + +#ifndef RTC_PORT +#define RTC_PORT(x) (0x70 + (x)) +#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */ +#endif + +#ifdef __HAVE_ARCH_CMPXCHG +/* + * This lock provides nmi access to the CMOS/RTC registers. It has some + * special properties. It is owned by a CPU and stores the index register + * currently being accessed (if owned). The idea here is that it works + * like a normal lock (normally). However, in an NMI, the NMI code will + * first check to see if its CPU owns the lock, meaning that the NMI + * interrupted during the read/write of the device. If it does, it goes ahead + * and performs the access and then restores the index register. If it does + * not, it locks normally. + * + * Note that since we are working with NMIs, we need this lock even in + * a non-SMP machine just to mark that the lock is owned. + * + * This only works with compare-and-swap. There is no other way to + * atomically claim the lock and set the owner. + */ +#include +extern volatile unsigned long cmos_lock; + +/* + * All of these below must be called with interrupts off, preempt + * disabled, etc. + */ + +static inline void lock_cmos(unsigned char reg) +{ + unsigned long new; + new = ((smp_processor_id()+1) << 8) | reg; + for (;;) { + if (cmos_lock) + continue; + if (__cmpxchg(&cmos_lock, 0, new, sizeof(cmos_lock)) == 0) + return; + } +} + +static inline void unlock_cmos(void) +{ + cmos_lock = 0; +} +static inline int do_i_have_lock_cmos(void) +{ + return (cmos_lock >> 8) == (smp_processor_id()+1); +} +static inline unsigned char current_lock_cmos_reg(void) +{ + return cmos_lock & 0xff; +} +#define lock_cmos_prefix(reg) \ + do { \ + unsigned long cmos_flags; \ + local_irq_save(cmos_flags); \ + lock_cmos(reg) +#define lock_cmos_suffix(reg) \ + unlock_cmos(); \ + local_irq_restore(cmos_flags); \ + } while (0) +#else +#define lock_cmos_prefix(reg) do {} while (0) +#define lock_cmos_suffix(reg) do {} while (0) +#define lock_cmos(reg) +#define unlock_cmos() +#define do_i_have_lock_cmos() 0 +#define current_lock_cmos_reg() 0 +#endif + +/* + * The yet supported machines all access the RTC index register via + * an ISA port access but the way to access the date register differs ... + */ +#define CMOS_READ(addr) rtc_cmos_read(addr) +#define CMOS_WRITE(val, addr) rtc_cmos_write(val, addr) +unsigned char rtc_cmos_read(unsigned char addr); +void rtc_cmos_write(unsigned char val, unsigned char addr); + +#define RTC_IRQ 8 + +#endif /* _ASM_MC146818RTC_H */ diff --git a/include/asm-i386/mca.h b/include/asm-i386/mca.h new file mode 100644 index 00000000000..09adf2eac4d --- /dev/null +++ b/include/asm-i386/mca.h @@ -0,0 +1,43 @@ +/* -*- mode: c; c-basic-offset: 8 -*- */ + +/* Platform specific MCA defines */ +#ifndef _ASM_MCA_H +#define _ASM_MCA_H + +/* Maximal number of MCA slots - actually, some machines have less, but + * they all have sufficient number of POS registers to cover 8. + */ +#define MCA_MAX_SLOT_NR 8 + +/* Most machines have only one MCA bus. The only multiple bus machines + * I know have at most two */ +#define MAX_MCA_BUSSES 2 + +#define MCA_PRIMARY_BUS 0 +#define MCA_SECONDARY_BUS 1 + +/* Dummy slot numbers on primary MCA for integrated functions */ +#define MCA_INTEGSCSI (MCA_MAX_SLOT_NR) +#define MCA_INTEGVIDEO (MCA_MAX_SLOT_NR+1) +#define MCA_MOTHERBOARD (MCA_MAX_SLOT_NR+2) + +/* Dummy POS values for integrated functions */ +#define MCA_DUMMY_POS_START 0x10000 +#define MCA_INTEGSCSI_POS (MCA_DUMMY_POS_START+1) +#define MCA_INTEGVIDEO_POS (MCA_DUMMY_POS_START+2) +#define MCA_MOTHERBOARD_POS (MCA_DUMMY_POS_START+3) + +/* MCA registers */ + +#define MCA_MOTHERBOARD_SETUP_REG 0x94 +#define MCA_ADAPTER_SETUP_REG 0x96 +#define MCA_POS_REG(n) (0x100+(n)) + +#define MCA_ENABLED 0x01 /* POS 2, set if adapter enabled */ + +/* Max number of adapters, including both slots and various integrated + * things. + */ +#define MCA_NUMADAPTERS (MCA_MAX_SLOT_NR+3) + +#endif diff --git a/include/asm-i386/mca_dma.h b/include/asm-i386/mca_dma.h new file mode 100644 index 00000000000..4b3b526c5a3 --- /dev/null +++ b/include/asm-i386/mca_dma.h @@ -0,0 +1,202 @@ +#ifndef MCA_DMA_H +#define MCA_DMA_H + +#include +#include + +/* + * Microchannel specific DMA stuff. DMA on an MCA machine is fairly similar to + * standard PC dma, but it certainly has its quirks. DMA register addresses + * are in a different place and there are some added functions. Most of this + * should be pretty obvious on inspection. Note that the user must divide + * count by 2 when using 16-bit dma; that is not handled by these functions. + * + * Ramen Noodles are yummy. + * + * 1998 Tymm Twillman + */ + +/* + * Registers that are used by the DMA controller; FN is the function register + * (tell the controller what to do) and EXE is the execution register (how + * to do it) + */ + +#define MCA_DMA_REG_FN 0x18 +#define MCA_DMA_REG_EXE 0x1A + +/* + * Functions that the DMA controller can do + */ + +#define MCA_DMA_FN_SET_IO 0x00 +#define MCA_DMA_FN_SET_ADDR 0x20 +#define MCA_DMA_FN_GET_ADDR 0x30 +#define MCA_DMA_FN_SET_COUNT 0x40 +#define MCA_DMA_FN_GET_COUNT 0x50 +#define MCA_DMA_FN_GET_STATUS 0x60 +#define MCA_DMA_FN_SET_MODE 0x70 +#define MCA_DMA_FN_SET_ARBUS 0x80 +#define MCA_DMA_FN_MASK 0x90 +#define MCA_DMA_FN_RESET_MASK 0xA0 +#define MCA_DMA_FN_MASTER_CLEAR 0xD0 + +/* + * Modes (used by setting MCA_DMA_FN_MODE in the function register) + * + * Note that the MODE_READ is read from memory (write to device), and + * MODE_WRITE is vice-versa. + */ + +#define MCA_DMA_MODE_XFER 0x04 /* read by default */ +#define MCA_DMA_MODE_READ 0x04 /* same as XFER */ +#define MCA_DMA_MODE_WRITE 0x08 /* OR with MODE_XFER to use */ +#define MCA_DMA_MODE_IO 0x01 /* DMA from IO register */ +#define MCA_DMA_MODE_16 0x40 /* 16 bit xfers */ + + +/** + * mca_enable_dma - channel to enable DMA on + * @dmanr: DMA channel + * + * Enable the MCA bus DMA on a channel. This can be called from + * IRQ context. + */ + +static __inline__ void mca_enable_dma(unsigned int dmanr) +{ + outb(MCA_DMA_FN_RESET_MASK | dmanr, MCA_DMA_REG_FN); +} + +/** + * mca_disble_dma - channel to disable DMA on + * @dmanr: DMA channel + * + * Enable the MCA bus DMA on a channel. This can be called from + * IRQ context. + */ + +static __inline__ void mca_disable_dma(unsigned int dmanr) +{ + outb(MCA_DMA_FN_MASK | dmanr, MCA_DMA_REG_FN); +} + +/** + * mca_set_dma_addr - load a 24bit DMA address + * @dmanr: DMA channel + * @a: 24bit bus address + * + * Load the address register in the DMA controller. This has a 24bit + * limitation (16Mb). + */ + +static __inline__ void mca_set_dma_addr(unsigned int dmanr, unsigned int a) +{ + outb(MCA_DMA_FN_SET_ADDR | dmanr, MCA_DMA_REG_FN); + outb(a & 0xff, MCA_DMA_REG_EXE); + outb((a >> 8) & 0xff, MCA_DMA_REG_EXE); + outb((a >> 16) & 0xff, MCA_DMA_REG_EXE); +} + +/** + * mca_get_dma_addr - load a 24bit DMA address + * @dmanr: DMA channel + * + * Read the address register in the DMA controller. This has a 24bit + * limitation (16Mb). The return is a bus address. + */ + +static __inline__ unsigned int mca_get_dma_addr(unsigned int dmanr) +{ + unsigned int addr; + + outb(MCA_DMA_FN_GET_ADDR | dmanr, MCA_DMA_REG_FN); + addr = inb(MCA_DMA_REG_EXE); + addr |= inb(MCA_DMA_REG_EXE) << 8; + addr |= inb(MCA_DMA_REG_EXE) << 16; + + return addr; +} + +/** + * mca_set_dma_count - load a 16bit transfer count + * @dmanr: DMA channel + * @count: count + * + * Set the DMA count for this channel. This can be up to 64Kbytes. + * Setting a count of zero will not do what you expect. + */ + +static __inline__ void mca_set_dma_count(unsigned int dmanr, unsigned int count) +{ + count--; /* transfers one more than count -- correct for this */ + + outb(MCA_DMA_FN_SET_COUNT | dmanr, MCA_DMA_REG_FN); + outb(count & 0xff, MCA_DMA_REG_EXE); + outb((count >> 8) & 0xff, MCA_DMA_REG_EXE); +} + +/** + * mca_get_dma_residue - get the remaining bytes to transfer + * @dmanr: DMA channel + * + * This function returns the number of bytes left to transfer + * on this DMA channel. + */ + +static __inline__ unsigned int mca_get_dma_residue(unsigned int dmanr) +{ + unsigned short count; + + outb(MCA_DMA_FN_GET_COUNT | dmanr, MCA_DMA_REG_FN); + count = 1 + inb(MCA_DMA_REG_EXE); + count += inb(MCA_DMA_REG_EXE) << 8; + + return count; +} + +/** + * mca_set_dma_io - set the port for an I/O transfer + * @dmanr: DMA channel + * @io_addr: an I/O port number + * + * Unlike the ISA bus DMA controllers the DMA on MCA bus can transfer + * with an I/O port target. + */ + +static __inline__ void mca_set_dma_io(unsigned int dmanr, unsigned int io_addr) +{ + /* + * DMA from a port address -- set the io address + */ + + outb(MCA_DMA_FN_SET_IO | dmanr, MCA_DMA_REG_FN); + outb(io_addr & 0xff, MCA_DMA_REG_EXE); + outb((io_addr >> 8) & 0xff, MCA_DMA_REG_EXE); +} + +/** + * mca_set_dma_mode - set the DMA mode + * @dmanr: DMA channel + * @mode: mode to set + * + * The DMA controller supports several modes. The mode values you can + * set are : + * + * %MCA_DMA_MODE_READ when reading from the DMA device. + * + * %MCA_DMA_MODE_WRITE to writing to the DMA device. + * + * %MCA_DMA_MODE_IO to do DMA to or from an I/O port. + * + * %MCA_DMA_MODE_16 to do 16bit transfers. + * + */ + +static __inline__ void mca_set_dma_mode(unsigned int dmanr, unsigned int mode) +{ + outb(MCA_DMA_FN_SET_MODE | dmanr, MCA_DMA_REG_FN); + outb(mode, MCA_DMA_REG_EXE); +} + +#endif /* MCA_DMA_H */ diff --git a/include/asm-i386/mman.h b/include/asm-i386/mman.h new file mode 100644 index 00000000000..196619a8385 --- /dev/null +++ b/include/asm-i386/mman.h @@ -0,0 +1,43 @@ +#ifndef __I386_MMAN_H__ +#define __I386_MMAN_H__ + +#define PROT_READ 0x1 /* page can be read */ +#define PROT_WRITE 0x2 /* page can be written */ +#define PROT_EXEC 0x4 /* page can be executed */ +#define PROT_SEM 0x8 /* page may be used for atomic ops */ +#define PROT_NONE 0x0 /* page can not be accessed */ +#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */ +#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */ + +#define MAP_SHARED 0x01 /* Share changes */ +#define MAP_PRIVATE 0x02 /* Changes are private */ +#define MAP_TYPE 0x0f /* Mask for type of mapping */ +#define MAP_FIXED 0x10 /* Interpret addr exactly */ +#define MAP_ANONYMOUS 0x20 /* don't use a file */ + +#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ +#define MAP_LOCKED 0x2000 /* pages are locked */ +#define MAP_NORESERVE 0x4000 /* don't check for reservations */ +#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ + +#define MS_ASYNC 1 /* sync memory asynchronously */ +#define MS_INVALIDATE 2 /* invalidate the caches */ +#define MS_SYNC 4 /* synchronous memory sync */ + +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#define MADV_NORMAL 0x0 /* default page-in behavior */ +#define MADV_RANDOM 0x1 /* page-in minimum required */ +#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */ +#define MADV_WILLNEED 0x3 /* pre-fault pages */ +#define MADV_DONTNEED 0x4 /* discard these pages */ + +/* compatibility flags */ +#define MAP_ANON MAP_ANONYMOUS +#define MAP_FILE 0 + +#endif /* __I386_MMAN_H__ */ diff --git a/include/asm-i386/mmu.h b/include/asm-i386/mmu.h new file mode 100644 index 00000000000..f431a0b86d4 --- /dev/null +++ b/include/asm-i386/mmu.h @@ -0,0 +1,17 @@ +#ifndef __i386_MMU_H +#define __i386_MMU_H + +#include +/* + * The i386 doesn't have a mmu context, but + * we put the segment information here. + * + * cpu_vm_mask is used to optimize ldt flushing. + */ +typedef struct { + int size; + struct semaphore sem; + void *ldt; +} mm_context_t; + +#endif diff --git a/include/asm-i386/mmu_context.h b/include/asm-i386/mmu_context.h new file mode 100644 index 00000000000..bf08218357e --- /dev/null +++ b/include/asm-i386/mmu_context.h @@ -0,0 +1,72 @@ +#ifndef __I386_SCHED_H +#define __I386_SCHED_H + +#include +#include +#include +#include +#include + +/* + * Used for LDT copy/destruction. + */ +int init_new_context(struct task_struct *tsk, struct mm_struct *mm); +void destroy_context(struct mm_struct *mm); + + +static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ +#ifdef CONFIG_SMP + unsigned cpu = smp_processor_id(); + if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK) + per_cpu(cpu_tlbstate, cpu).state = TLBSTATE_LAZY; +#endif +} + +static inline void switch_mm(struct mm_struct *prev, + struct mm_struct *next, + struct task_struct *tsk) +{ + int cpu = smp_processor_id(); + + if (likely(prev != next)) { + /* stop flush ipis for the previous mm */ + cpu_clear(cpu, prev->cpu_vm_mask); +#ifdef CONFIG_SMP + per_cpu(cpu_tlbstate, cpu).state = TLBSTATE_OK; + per_cpu(cpu_tlbstate, cpu).active_mm = next; +#endif + cpu_set(cpu, next->cpu_vm_mask); + + /* Re-load page tables */ + load_cr3(next->pgd); + + /* + * load the LDT, if the LDT is different: + */ + if (unlikely(prev->context.ldt != next->context.ldt)) + load_LDT_nolock(&next->context, cpu); + } +#ifdef CONFIG_SMP + else { + per_cpu(cpu_tlbstate, cpu).state = TLBSTATE_OK; + BUG_ON(per_cpu(cpu_tlbstate, cpu).active_mm != next); + + if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) { + /* We were in lazy tlb mode and leave_mm disabled + * tlb flush IPI delivery. We must reload %cr3. + */ + load_cr3(next->pgd); + load_LDT_nolock(&next->context, cpu); + } + } +#endif +} + +#define deactivate_mm(tsk, mm) \ + asm("movl %0,%%fs ; movl %0,%%gs": :"r" (0)) + +#define activate_mm(prev, next) \ + switch_mm((prev),(next),NULL) + +#endif diff --git a/include/asm-i386/mmx.h b/include/asm-i386/mmx.h new file mode 100644 index 00000000000..46b71da9986 --- /dev/null +++ b/include/asm-i386/mmx.h @@ -0,0 +1,14 @@ +#ifndef _ASM_MMX_H +#define _ASM_MMX_H + +/* + * MMX 3Dnow! helper operations + */ + +#include + +extern void *_mmx_memcpy(void *to, const void *from, size_t size); +extern void mmx_clear_page(void *page); +extern void mmx_copy_page(void *to, void *from); + +#endif diff --git a/include/asm-i386/mmzone.h b/include/asm-i386/mmzone.h new file mode 100644 index 00000000000..13830ae67ca --- /dev/null +++ b/include/asm-i386/mmzone.h @@ -0,0 +1,147 @@ +/* + * Written by Pat Gaughen (gone@us.ibm.com) Mar 2002 + * + */ + +#ifndef _ASM_MMZONE_H_ +#define _ASM_MMZONE_H_ + +#include + +#ifdef CONFIG_DISCONTIGMEM + +#ifdef CONFIG_NUMA + #ifdef CONFIG_X86_NUMAQ + #include + #else /* summit or generic arch */ + #include + #endif +#else /* !CONFIG_NUMA */ + #define get_memcfg_numa get_memcfg_numa_flat + #define get_zholes_size(n) (0) +#endif /* CONFIG_NUMA */ + +extern struct pglist_data *node_data[]; +#define NODE_DATA(nid) (node_data[nid]) + +/* + * generic node memory support, the following assumptions apply: + * + * 1) memory comes in 256Mb contigious chunks which are either present or not + * 2) we will not have more than 64Gb in total + * + * for now assume that 64Gb is max amount of RAM for whole system + * 64Gb / 4096bytes/page = 16777216 pages + */ +#define MAX_NR_PAGES 16777216 +#define MAX_ELEMENTS 256 +#define PAGES_PER_ELEMENT (MAX_NR_PAGES/MAX_ELEMENTS) + +extern s8 physnode_map[]; + +static inline int pfn_to_nid(unsigned long pfn) +{ +#ifdef CONFIG_NUMA + return((int) physnode_map[(pfn) / PAGES_PER_ELEMENT]); +#else + return 0; +#endif +} + +/* + * Following are macros that are specific to this numa platform. + */ +#define reserve_bootmem(addr, size) \ + reserve_bootmem_node(NODE_DATA(0), (addr), (size)) +#define alloc_bootmem(x) \ + __alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS)) +#define alloc_bootmem_low(x) \ + __alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, 0) +#define alloc_bootmem_pages(x) \ + __alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS)) +#define alloc_bootmem_low_pages(x) \ + __alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, 0) +#define alloc_bootmem_node(ignore, x) \ + __alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS)) +#define alloc_bootmem_pages_node(ignore, x) \ + __alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS)) +#define alloc_bootmem_low_pages_node(ignore, x) \ + __alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, 0) + +#define node_localnr(pfn, nid) ((pfn) - node_data[nid]->node_start_pfn) + +/* + * Following are macros that each numa implmentation must define. + */ + +/* + * Given a kernel address, find the home node of the underlying memory. + */ +#define kvaddr_to_nid(kaddr) pfn_to_nid(__pa(kaddr) >> PAGE_SHIFT) + +#define node_mem_map(nid) (NODE_DATA(nid)->node_mem_map) +#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) +#define node_end_pfn(nid) \ +({ \ + pg_data_t *__pgdat = NODE_DATA(nid); \ + __pgdat->node_start_pfn + __pgdat->node_spanned_pages; \ +}) + +#define local_mapnr(kvaddr) \ +({ \ + unsigned long __pfn = __pa(kvaddr) >> PAGE_SHIFT; \ + (__pfn - node_start_pfn(pfn_to_nid(__pfn))); \ +}) + +/* XXX: FIXME -- wli */ +#define kern_addr_valid(kaddr) (0) + +#define pfn_to_page(pfn) \ +({ \ + unsigned long __pfn = pfn; \ + int __node = pfn_to_nid(__pfn); \ + &node_mem_map(__node)[node_localnr(__pfn,__node)]; \ +}) + +#define page_to_pfn(pg) \ +({ \ + struct page *__page = pg; \ + struct zone *__zone = page_zone(__page); \ + (unsigned long)(__page - __zone->zone_mem_map) \ + + __zone->zone_start_pfn; \ +}) + +#ifdef CONFIG_X86_NUMAQ /* we have contiguous memory on NUMA-Q */ +#define pfn_valid(pfn) ((pfn) < num_physpages) +#else +static inline int pfn_valid(int pfn) +{ + int nid = pfn_to_nid(pfn); + + if (nid >= 0) + return (pfn < node_end_pfn(nid)); + return 0; +} +#endif + +extern int get_memcfg_numa_flat(void ); +/* + * This allows any one NUMA architecture to be compiled + * for, and still fall back to the flat function if it + * fails. + */ +static inline void get_memcfg_numa(void) +{ +#ifdef CONFIG_X86_NUMAQ + if (get_memcfg_numaq()) + return; +#elif CONFIG_ACPI_SRAT + if (get_memcfg_from_srat()) + return; +#endif + + get_memcfg_numa_flat(); +} + +#endif /* CONFIG_DISCONTIGMEM */ +#endif /* _ASM_MMZONE_H_ */ diff --git a/include/asm-i386/module.h b/include/asm-i386/module.h new file mode 100644 index 00000000000..508865e2630 --- /dev/null +++ b/include/asm-i386/module.h @@ -0,0 +1,75 @@ +#ifndef _ASM_I386_MODULE_H +#define _ASM_I386_MODULE_H + +/* x86 is simple */ +struct mod_arch_specific +{ +}; + +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr + +#ifdef CONFIG_M386 +#define MODULE_PROC_FAMILY "386 " +#elif defined CONFIG_M486 +#define MODULE_PROC_FAMILY "486 " +#elif defined CONFIG_M586 +#define MODULE_PROC_FAMILY "586 " +#elif defined CONFIG_M586TSC +#define MODULE_PROC_FAMILY "586TSC " +#elif defined CONFIG_M586MMX +#define MODULE_PROC_FAMILY "586MMX " +#elif defined CONFIG_M686 +#define MODULE_PROC_FAMILY "686 " +#elif defined CONFIG_MPENTIUMII +#define MODULE_PROC_FAMILY "PENTIUMII " +#elif defined CONFIG_MPENTIUMIII +#define MODULE_PROC_FAMILY "PENTIUMIII " +#elif defined CONFIG_MPENTIUMM +#define MODULE_PROC_FAMILY "PENTIUMM " +#elif defined CONFIG_MPENTIUM4 +#define MODULE_PROC_FAMILY "PENTIUM4 " +#elif defined CONFIG_MK6 +#define MODULE_PROC_FAMILY "K6 " +#elif defined CONFIG_MK7 +#define MODULE_PROC_FAMILY "K7 " +#elif defined CONFIG_MK8 +#define MODULE_PROC_FAMILY "K8 " +#elif defined CONFIG_X86_ELAN +#define MODULE_PROC_FAMILY "ELAN " +#elif defined CONFIG_MCRUSOE +#define MODULE_PROC_FAMILY "CRUSOE " +#elif defined CONFIG_MEFFICEON +#define MODULE_PROC_FAMILY "EFFICEON " +#elif defined CONFIG_MWINCHIPC6 +#define MODULE_PROC_FAMILY "WINCHIPC6 " +#elif defined CONFIG_MWINCHIP2 +#define MODULE_PROC_FAMILY "WINCHIP2 " +#elif defined CONFIG_MWINCHIP3D +#define MODULE_PROC_FAMILY "WINCHIP3D " +#elif defined CONFIG_MCYRIXIII +#define MODULE_PROC_FAMILY "CYRIXIII " +#elif defined CONFIG_MVIAC3_2 +#define MODULE_PROC_FAMILY "VIAC3-2 " +#elif CONFIG_MGEODE +#define MODULE_PROC_FAMILY "GEODE " +#else +#error unknown processor family +#endif + +#ifdef CONFIG_REGPARM +#define MODULE_REGPARM "REGPARM " +#else +#define MODULE_REGPARM "" +#endif + +#ifdef CONFIG_4KSTACKS +#define MODULE_STACKSIZE "4KSTACKS " +#else +#define MODULE_STACKSIZE "" +#endif + +#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY MODULE_REGPARM MODULE_STACKSIZE + +#endif /* _ASM_I386_MODULE_H */ diff --git a/include/asm-i386/mpspec.h b/include/asm-i386/mpspec.h new file mode 100644 index 00000000000..d9fafba075b --- /dev/null +++ b/include/asm-i386/mpspec.h @@ -0,0 +1,83 @@ +#ifndef __ASM_MPSPEC_H +#define __ASM_MPSPEC_H + +#include +#include +#include + +extern int mp_bus_id_to_type [MAX_MP_BUSSES]; +extern int mp_bus_id_to_node [MAX_MP_BUSSES]; +extern int mp_bus_id_to_local [MAX_MP_BUSSES]; +extern int quad_local_to_mp_bus_id [NR_CPUS/4][4]; +extern int mp_bus_id_to_pci_bus [MAX_MP_BUSSES]; + +extern unsigned int boot_cpu_physical_apicid; +extern int smp_found_config; +extern void find_smp_config (void); +extern void get_smp_config (void); +extern int nr_ioapics; +extern int apic_version [MAX_APICS]; +extern int mp_bus_id_to_type [MAX_MP_BUSSES]; +extern int mp_irq_entries; +extern struct mpc_config_intsrc mp_irqs [MAX_IRQ_SOURCES]; +extern int mpc_default_type; +extern int mp_bus_id_to_pci_bus [MAX_MP_BUSSES]; +extern unsigned long mp_lapic_addr; +extern int pic_mode; +extern int using_apic_timer; + +#ifdef CONFIG_ACPI_BOOT +extern void mp_register_lapic (u8 id, u8 enabled); +extern void mp_register_lapic_address (u64 address); +extern void mp_register_ioapic (u8 id, u32 address, u32 gsi_base); +extern void mp_override_legacy_irq (u8 bus_irq, u8 polarity, u8 trigger, u32 gsi); +extern void mp_config_acpi_legacy_irqs (void); +extern int mp_register_gsi (u32 gsi, int edge_level, int active_high_low); +#endif /*CONFIG_ACPI_BOOT*/ + +#define PHYSID_ARRAY_SIZE BITS_TO_LONGS(MAX_APICS) + +struct physid_mask +{ + unsigned long mask[PHYSID_ARRAY_SIZE]; +}; + +typedef struct physid_mask physid_mask_t; + +#define physid_set(physid, map) set_bit(physid, (map).mask) +#define physid_clear(physid, map) clear_bit(physid, (map).mask) +#define physid_isset(physid, map) test_bit(physid, (map).mask) +#define physid_test_and_set(physid, map) test_and_set_bit(physid, (map).mask) + +#define physids_and(dst, src1, src2) bitmap_and((dst).mask, (src1).mask, (src2).mask, MAX_APICS) +#define physids_or(dst, src1, src2) bitmap_or((dst).mask, (src1).mask, (src2).mask, MAX_APICS) +#define physids_clear(map) bitmap_zero((map).mask, MAX_APICS) +#define physids_complement(dst, src) bitmap_complement((dst).mask,(src).mask, MAX_APICS) +#define physids_empty(map) bitmap_empty((map).mask, MAX_APICS) +#define physids_equal(map1, map2) bitmap_equal((map1).mask, (map2).mask, MAX_APICS) +#define physids_weight(map) bitmap_weight((map).mask, MAX_APICS) +#define physids_shift_right(d, s, n) bitmap_shift_right((d).mask, (s).mask, n, MAX_APICS) +#define physids_shift_left(d, s, n) bitmap_shift_left((d).mask, (s).mask, n, MAX_APICS) +#define physids_coerce(map) ((map).mask[0]) + +#define physids_promote(physids) \ + ({ \ + physid_mask_t __physid_mask = PHYSID_MASK_NONE; \ + __physid_mask.mask[0] = physids; \ + __physid_mask; \ + }) + +#define physid_mask_of_physid(physid) \ + ({ \ + physid_mask_t __physid_mask = PHYSID_MASK_NONE; \ + physid_set(physid, __physid_mask); \ + __physid_mask; \ + }) + +#define PHYSID_MASK_ALL { {[0 ... PHYSID_ARRAY_SIZE-1] = ~0UL} } +#define PHYSID_MASK_NONE { {[0 ... PHYSID_ARRAY_SIZE-1] = 0UL} } + +extern physid_mask_t phys_cpu_present_map; + +#endif + diff --git a/include/asm-i386/mpspec_def.h b/include/asm-i386/mpspec_def.h new file mode 100644 index 00000000000..a961093dbf8 --- /dev/null +++ b/include/asm-i386/mpspec_def.h @@ -0,0 +1,188 @@ +#ifndef __ASM_MPSPEC_DEF_H +#define __ASM_MPSPEC_DEF_H + +/* + * Structure definitions for SMP machines following the + * Intel Multiprocessing Specification 1.1 and 1.4. + */ + +/* + * This tag identifies where the SMP configuration + * information is. + */ + +#define SMP_MAGIC_IDENT (('_'<<24)|('P'<<16)|('M'<<8)|'_') + +#define MAX_MPC_ENTRY 1024 +#define MAX_APICS 256 + +struct intel_mp_floating +{ + char mpf_signature[4]; /* "_MP_" */ + unsigned long mpf_physptr; /* Configuration table address */ + unsigned char mpf_length; /* Our length (paragraphs) */ + unsigned char mpf_specification;/* Specification version */ + unsigned char mpf_checksum; /* Checksum (makes sum 0) */ + unsigned char mpf_feature1; /* Standard or configuration ? */ + unsigned char mpf_feature2; /* Bit7 set for IMCR|PIC */ + unsigned char mpf_feature3; /* Unused (0) */ + unsigned char mpf_feature4; /* Unused (0) */ + unsigned char mpf_feature5; /* Unused (0) */ +}; + +struct mp_config_table +{ + char mpc_signature[4]; +#define MPC_SIGNATURE "PCMP" + unsigned short mpc_length; /* Size of table */ + char mpc_spec; /* 0x01 */ + char mpc_checksum; + char mpc_oem[8]; + char mpc_productid[12]; + unsigned long mpc_oemptr; /* 0 if not present */ + unsigned short mpc_oemsize; /* 0 if not present */ + unsigned short mpc_oemcount; + unsigned long mpc_lapic; /* APIC address */ + unsigned long reserved; +}; + +/* Followed by entries */ + +#define MP_PROCESSOR 0 +#define MP_BUS 1 +#define MP_IOAPIC 2 +#define MP_INTSRC 3 +#define MP_LINTSRC 4 +#define MP_TRANSLATION 192 /* Used by IBM NUMA-Q to describe node locality */ + +struct mpc_config_processor +{ + unsigned char mpc_type; + unsigned char mpc_apicid; /* Local APIC number */ + unsigned char mpc_apicver; /* Its versions */ + unsigned char mpc_cpuflag; +#define CPU_ENABLED 1 /* Processor is available */ +#define CPU_BOOTPROCESSOR 2 /* Processor is the BP */ + unsigned long mpc_cpufeature; +#define CPU_STEPPING_MASK 0x0F +#define CPU_MODEL_MASK 0xF0 +#define CPU_FAMILY_MASK 0xF00 + unsigned long mpc_featureflag; /* CPUID feature value */ + unsigned long mpc_reserved[2]; +}; + +struct mpc_config_bus +{ + unsigned char mpc_type; + unsigned char mpc_busid; + unsigned char mpc_bustype[6] __attribute((packed)); +}; + +/* List of Bus Type string values, Intel MP Spec. */ +#define BUSTYPE_EISA "EISA" +#define BUSTYPE_ISA "ISA" +#define BUSTYPE_INTERN "INTERN" /* Internal BUS */ +#define BUSTYPE_MCA "MCA" +#define BUSTYPE_VL "VL" /* Local bus */ +#define BUSTYPE_PCI "PCI" +#define BUSTYPE_PCMCIA "PCMCIA" +#define BUSTYPE_CBUS "CBUS" +#define BUSTYPE_CBUSII "CBUSII" +#define BUSTYPE_FUTURE "FUTURE" +#define BUSTYPE_MBI "MBI" +#define BUSTYPE_MBII "MBII" +#define BUSTYPE_MPI "MPI" +#define BUSTYPE_MPSA "MPSA" +#define BUSTYPE_NUBUS "NUBUS" +#define BUSTYPE_TC "TC" +#define BUSTYPE_VME "VME" +#define BUSTYPE_XPRESS "XPRESS" +#define BUSTYPE_NEC98 "NEC98" + +struct mpc_config_ioapic +{ + unsigned char mpc_type; + unsigned char mpc_apicid; + unsigned char mpc_apicver; + unsigned char mpc_flags; +#define MPC_APIC_USABLE 0x01 + unsigned long mpc_apicaddr; +}; + +struct mpc_config_intsrc +{ + unsigned char mpc_type; + unsigned char mpc_irqtype; + unsigned short mpc_irqflag; + unsigned char mpc_srcbus; + unsigned char mpc_srcbusirq; + unsigned char mpc_dstapic; + unsigned char mpc_dstirq; +}; + +enum mp_irq_source_types { + mp_INT = 0, + mp_NMI = 1, + mp_SMI = 2, + mp_ExtINT = 3 +}; + +#define MP_IRQDIR_DEFAULT 0 +#define MP_IRQDIR_HIGH 1 +#define MP_IRQDIR_LOW 3 + + +struct mpc_config_lintsrc +{ + unsigned char mpc_type; + unsigned char mpc_irqtype; + unsigned short mpc_irqflag; + unsigned char mpc_srcbusid; + unsigned char mpc_srcbusirq; + unsigned char mpc_destapic; +#define MP_APIC_ALL 0xFF + unsigned char mpc_destapiclint; +}; + +struct mp_config_oemtable +{ + char oem_signature[4]; +#define MPC_OEM_SIGNATURE "_OEM" + unsigned short oem_length; /* Size of table */ + char oem_rev; /* 0x01 */ + char oem_checksum; + char mpc_oem[8]; +}; + +struct mpc_config_translation +{ + unsigned char mpc_type; + unsigned char trans_len; + unsigned char trans_type; + unsigned char trans_quad; + unsigned char trans_global; + unsigned char trans_local; + unsigned short trans_reserved; +}; + +/* + * Default configurations + * + * 1 2 CPU ISA 82489DX + * 2 2 CPU EISA 82489DX neither IRQ 0 timer nor IRQ 13 DMA chaining + * 3 2 CPU EISA 82489DX + * 4 2 CPU MCA 82489DX + * 5 2 CPU ISA+PCI + * 6 2 CPU EISA+PCI + * 7 2 CPU MCA+PCI + */ + +enum mp_bustype { + MP_BUS_ISA = 1, + MP_BUS_EISA, + MP_BUS_PCI, + MP_BUS_MCA, + MP_BUS_NEC98 +}; +#endif + diff --git a/include/asm-i386/msgbuf.h b/include/asm-i386/msgbuf.h new file mode 100644 index 00000000000..b8d659c157a --- /dev/null +++ b/include/asm-i386/msgbuf.h @@ -0,0 +1,31 @@ +#ifndef _I386_MSGBUF_H +#define _I386_MSGBUF_H + +/* + * The msqid64_ds structure for i386 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned long __unused1; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned long __unused2; + __kernel_time_t msg_ctime; /* last change time */ + unsigned long __unused3; + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _I386_MSGBUF_H */ diff --git a/include/asm-i386/msi.h b/include/asm-i386/msi.h new file mode 100644 index 00000000000..b85393094c8 --- /dev/null +++ b/include/asm-i386/msi.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2003-2004 Intel + * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com) + */ + +#ifndef ASM_MSI_H +#define ASM_MSI_H + +#include +#include + +#define LAST_DEVICE_VECTOR 232 +#define MSI_DEST_MODE MSI_LOGICAL_MODE +#define MSI_TARGET_CPU_SHIFT 12 + +#ifdef CONFIG_SMP +#define MSI_TARGET_CPU logical_smp_processor_id() +#else +#define MSI_TARGET_CPU cpu_to_logical_apicid(first_cpu(cpu_online_map)) +#endif + +#endif /* ASM_MSI_H */ diff --git a/include/asm-i386/msr.h b/include/asm-i386/msr.h new file mode 100644 index 00000000000..c76fce8badb --- /dev/null +++ b/include/asm-i386/msr.h @@ -0,0 +1,272 @@ +#ifndef __ASM_MSR_H +#define __ASM_MSR_H + +/* + * Access to machine-specific registers (available on 586 and better only) + * Note: the rd* operations modify the parameters directly (without using + * pointer indirection), this allows gcc to optimize better + */ + +#define rdmsr(msr,val1,val2) \ + __asm__ __volatile__("rdmsr" \ + : "=a" (val1), "=d" (val2) \ + : "c" (msr)) + +#define wrmsr(msr,val1,val2) \ + __asm__ __volatile__("wrmsr" \ + : /* no outputs */ \ + : "c" (msr), "a" (val1), "d" (val2)) + +#define rdmsrl(msr,val) do { \ + unsigned long l__,h__; \ + rdmsr (msr, l__, h__); \ + val = l__; \ + val |= ((u64)h__<<32); \ +} while(0) + +static inline void wrmsrl (unsigned long msr, unsigned long long val) +{ + unsigned long lo, hi; + lo = (unsigned long) val; + hi = val >> 32; + wrmsr (msr, lo, hi); +} + +/* wrmsr with exception handling */ +#define wrmsr_safe(msr,a,b) ({ int ret__; \ + asm volatile("2: wrmsr ; xorl %0,%0\n" \ + "1:\n\t" \ + ".section .fixup,\"ax\"\n\t" \ + "3: movl %4,%0 ; jmp 1b\n\t" \ + ".previous\n\t" \ + ".section __ex_table,\"a\"\n" \ + " .align 4\n\t" \ + " .long 2b,3b\n\t" \ + ".previous" \ + : "=a" (ret__) \ + : "c" (msr), "0" (a), "d" (b), "i" (-EFAULT));\ + ret__; }) + +#define rdtsc(low,high) \ + __asm__ __volatile__("rdtsc" : "=a" (low), "=d" (high)) + +#define rdtscl(low) \ + __asm__ __volatile__("rdtsc" : "=a" (low) : : "edx") + +#define rdtscll(val) \ + __asm__ __volatile__("rdtsc" : "=A" (val)) + +#define write_tsc(val1,val2) wrmsr(0x10, val1, val2) + +#define rdpmc(counter,low,high) \ + __asm__ __volatile__("rdpmc" \ + : "=a" (low), "=d" (high) \ + : "c" (counter)) + +/* symbolic names for some interesting MSRs */ +/* Intel defined MSRs. */ +#define MSR_IA32_P5_MC_ADDR 0 +#define MSR_IA32_P5_MC_TYPE 1 +#define MSR_IA32_PLATFORM_ID 0x17 +#define MSR_IA32_EBL_CR_POWERON 0x2a + +#define MSR_IA32_APICBASE 0x1b +#define MSR_IA32_APICBASE_BSP (1<<8) +#define MSR_IA32_APICBASE_ENABLE (1<<11) +#define MSR_IA32_APICBASE_BASE (0xfffff<<12) + +#define MSR_IA32_UCODE_WRITE 0x79 +#define MSR_IA32_UCODE_REV 0x8b + +#define MSR_P6_PERFCTR0 0xc1 +#define MSR_P6_PERFCTR1 0xc2 + +#define MSR_IA32_BBL_CR_CTL 0x119 + +#define MSR_IA32_SYSENTER_CS 0x174 +#define MSR_IA32_SYSENTER_ESP 0x175 +#define MSR_IA32_SYSENTER_EIP 0x176 + +#define MSR_IA32_MCG_CAP 0x179 +#define MSR_IA32_MCG_STATUS 0x17a +#define MSR_IA32_MCG_CTL 0x17b + +/* P4/Xeon+ specific */ +#define MSR_IA32_MCG_EAX 0x180 +#define MSR_IA32_MCG_EBX 0x181 +#define MSR_IA32_MCG_ECX 0x182 +#define MSR_IA32_MCG_EDX 0x183 +#define MSR_IA32_MCG_ESI 0x184 +#define MSR_IA32_MCG_EDI 0x185 +#define MSR_IA32_MCG_EBP 0x186 +#define MSR_IA32_MCG_ESP 0x187 +#define MSR_IA32_MCG_EFLAGS 0x188 +#define MSR_IA32_MCG_EIP 0x189 +#define MSR_IA32_MCG_RESERVED 0x18A + +#define MSR_P6_EVNTSEL0 0x186 +#define MSR_P6_EVNTSEL1 0x187 + +#define MSR_IA32_PERF_STATUS 0x198 +#define MSR_IA32_PERF_CTL 0x199 + +#define MSR_IA32_THERM_CONTROL 0x19a +#define MSR_IA32_THERM_INTERRUPT 0x19b +#define MSR_IA32_THERM_STATUS 0x19c +#define MSR_IA32_MISC_ENABLE 0x1a0 + +#define MSR_IA32_DEBUGCTLMSR 0x1d9 +#define MSR_IA32_LASTBRANCHFROMIP 0x1db +#define MSR_IA32_LASTBRANCHTOIP 0x1dc +#define MSR_IA32_LASTINTFROMIP 0x1dd +#define MSR_IA32_LASTINTTOIP 0x1de + +#define MSR_IA32_MC0_CTL 0x400 +#define MSR_IA32_MC0_STATUS 0x401 +#define MSR_IA32_MC0_ADDR 0x402 +#define MSR_IA32_MC0_MISC 0x403 + +/* Pentium IV performance counter MSRs */ +#define MSR_P4_BPU_PERFCTR0 0x300 +#define MSR_P4_BPU_PERFCTR1 0x301 +#define MSR_P4_BPU_PERFCTR2 0x302 +#define MSR_P4_BPU_PERFCTR3 0x303 +#define MSR_P4_MS_PERFCTR0 0x304 +#define MSR_P4_MS_PERFCTR1 0x305 +#define MSR_P4_MS_PERFCTR2 0x306 +#define MSR_P4_MS_PERFCTR3 0x307 +#define MSR_P4_FLAME_PERFCTR0 0x308 +#define MSR_P4_FLAME_PERFCTR1 0x309 +#define MSR_P4_FLAME_PERFCTR2 0x30a +#define MSR_P4_FLAME_PERFCTR3 0x30b +#define MSR_P4_IQ_PERFCTR0 0x30c +#define MSR_P4_IQ_PERFCTR1 0x30d +#define MSR_P4_IQ_PERFCTR2 0x30e +#define MSR_P4_IQ_PERFCTR3 0x30f +#define MSR_P4_IQ_PERFCTR4 0x310 +#define MSR_P4_IQ_PERFCTR5 0x311 +#define MSR_P4_BPU_CCCR0 0x360 +#define MSR_P4_BPU_CCCR1 0x361 +#define MSR_P4_BPU_CCCR2 0x362 +#define MSR_P4_BPU_CCCR3 0x363 +#define MSR_P4_MS_CCCR0 0x364 +#define MSR_P4_MS_CCCR1 0x365 +#define MSR_P4_MS_CCCR2 0x366 +#define MSR_P4_MS_CCCR3 0x367 +#define MSR_P4_FLAME_CCCR0 0x368 +#define MSR_P4_FLAME_CCCR1 0x369 +#define MSR_P4_FLAME_CCCR2 0x36a +#define MSR_P4_FLAME_CCCR3 0x36b +#define MSR_P4_IQ_CCCR0 0x36c +#define MSR_P4_IQ_CCCR1 0x36d +#define MSR_P4_IQ_CCCR2 0x36e +#define MSR_P4_IQ_CCCR3 0x36f +#define MSR_P4_IQ_CCCR4 0x370 +#define MSR_P4_IQ_CCCR5 0x371 +#define MSR_P4_ALF_ESCR0 0x3ca +#define MSR_P4_ALF_ESCR1 0x3cb +#define MSR_P4_BPU_ESCR0 0x3b2 +#define MSR_P4_BPU_ESCR1 0x3b3 +#define MSR_P4_BSU_ESCR0 0x3a0 +#define MSR_P4_BSU_ESCR1 0x3a1 +#define MSR_P4_CRU_ESCR0 0x3b8 +#define MSR_P4_CRU_ESCR1 0x3b9 +#define MSR_P4_CRU_ESCR2 0x3cc +#define MSR_P4_CRU_ESCR3 0x3cd +#define MSR_P4_CRU_ESCR4 0x3e0 +#define MSR_P4_CRU_ESCR5 0x3e1 +#define MSR_P4_DAC_ESCR0 0x3a8 +#define MSR_P4_DAC_ESCR1 0x3a9 +#define MSR_P4_FIRM_ESCR0 0x3a4 +#define MSR_P4_FIRM_ESCR1 0x3a5 +#define MSR_P4_FLAME_ESCR0 0x3a6 +#define MSR_P4_FLAME_ESCR1 0x3a7 +#define MSR_P4_FSB_ESCR0 0x3a2 +#define MSR_P4_FSB_ESCR1 0x3a3 +#define MSR_P4_IQ_ESCR0 0x3ba +#define MSR_P4_IQ_ESCR1 0x3bb +#define MSR_P4_IS_ESCR0 0x3b4 +#define MSR_P4_IS_ESCR1 0x3b5 +#define MSR_P4_ITLB_ESCR0 0x3b6 +#define MSR_P4_ITLB_ESCR1 0x3b7 +#define MSR_P4_IX_ESCR0 0x3c8 +#define MSR_P4_IX_ESCR1 0x3c9 +#define MSR_P4_MOB_ESCR0 0x3aa +#define MSR_P4_MOB_ESCR1 0x3ab +#define MSR_P4_MS_ESCR0 0x3c0 +#define MSR_P4_MS_ESCR1 0x3c1 +#define MSR_P4_PMH_ESCR0 0x3ac +#define MSR_P4_PMH_ESCR1 0x3ad +#define MSR_P4_RAT_ESCR0 0x3bc +#define MSR_P4_RAT_ESCR1 0x3bd +#define MSR_P4_SAAT_ESCR0 0x3ae +#define MSR_P4_SAAT_ESCR1 0x3af +#define MSR_P4_SSU_ESCR0 0x3be +#define MSR_P4_SSU_ESCR1 0x3bf /* guess: not defined in manual */ +#define MSR_P4_TBPU_ESCR0 0x3c2 +#define MSR_P4_TBPU_ESCR1 0x3c3 +#define MSR_P4_TC_ESCR0 0x3c4 +#define MSR_P4_TC_ESCR1 0x3c5 +#define MSR_P4_U2L_ESCR0 0x3b0 +#define MSR_P4_U2L_ESCR1 0x3b1 + +/* AMD Defined MSRs */ +#define MSR_K6_EFER 0xC0000080 +#define MSR_K6_STAR 0xC0000081 +#define MSR_K6_WHCR 0xC0000082 +#define MSR_K6_UWCCR 0xC0000085 +#define MSR_K6_EPMR 0xC0000086 +#define MSR_K6_PSOR 0xC0000087 +#define MSR_K6_PFIR 0xC0000088 + +#define MSR_K7_EVNTSEL0 0xC0010000 +#define MSR_K7_EVNTSEL1 0xC0010001 +#define MSR_K7_EVNTSEL2 0xC0010002 +#define MSR_K7_EVNTSEL3 0xC0010003 +#define MSR_K7_PERFCTR0 0xC0010004 +#define MSR_K7_PERFCTR1 0xC0010005 +#define MSR_K7_PERFCTR2 0xC0010006 +#define MSR_K7_PERFCTR3 0xC0010007 +#define MSR_K7_HWCR 0xC0010015 +#define MSR_K7_CLK_CTL 0xC001001b +#define MSR_K7_FID_VID_CTL 0xC0010041 +#define MSR_K7_FID_VID_STATUS 0xC0010042 + +/* extended feature register */ +#define MSR_EFER 0xc0000080 + +/* EFER bits: */ + +/* Execute Disable enable */ +#define _EFER_NX 11 +#define EFER_NX (1<<_EFER_NX) + +/* Centaur-Hauls/IDT defined MSRs. */ +#define MSR_IDT_FCR1 0x107 +#define MSR_IDT_FCR2 0x108 +#define MSR_IDT_FCR3 0x109 +#define MSR_IDT_FCR4 0x10a + +#define MSR_IDT_MCR0 0x110 +#define MSR_IDT_MCR1 0x111 +#define MSR_IDT_MCR2 0x112 +#define MSR_IDT_MCR3 0x113 +#define MSR_IDT_MCR4 0x114 +#define MSR_IDT_MCR5 0x115 +#define MSR_IDT_MCR6 0x116 +#define MSR_IDT_MCR7 0x117 +#define MSR_IDT_MCR_CTRL 0x120 + +/* VIA Cyrix defined MSRs*/ +#define MSR_VIA_FCR 0x1107 +#define MSR_VIA_LONGHAUL 0x110a +#define MSR_VIA_RNG 0x110b +#define MSR_VIA_BCR2 0x1147 + +/* Transmeta defined MSRs */ +#define MSR_TMTA_LONGRUN_CTRL 0x80868010 +#define MSR_TMTA_LONGRUN_FLAGS 0x80868011 +#define MSR_TMTA_LRTI_READOUT 0x80868018 +#define MSR_TMTA_LRTI_VOLT_MHZ 0x8086801a + +#endif /* __ASM_MSR_H */ diff --git a/include/asm-i386/mtrr.h b/include/asm-i386/mtrr.h new file mode 100644 index 00000000000..5b6ceda68c5 --- /dev/null +++ b/include/asm-i386/mtrr.h @@ -0,0 +1,107 @@ +/* Generic MTRR (Memory Type Range Register) ioctls. + + Copyright (C) 1997-1999 Richard Gooch + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Library General Public + License as published by the Free Software Foundation; either + version 2 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Library General Public License for more details. + + You should have received a copy of the GNU Library General Public + License along with this library; if not, write to the Free + Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + Richard Gooch may be reached by email at rgooch@atnf.csiro.au + The postal address is: + Richard Gooch, c/o ATNF, P. O. Box 76, Epping, N.S.W., 2121, Australia. +*/ +#ifndef _LINUX_MTRR_H +#define _LINUX_MTRR_H + +#include +#include + +#define MTRR_IOCTL_BASE 'M' + +struct mtrr_sentry +{ + unsigned long base; /* Base address */ + unsigned int size; /* Size of region */ + unsigned int type; /* Type of region */ +}; + +struct mtrr_gentry +{ + unsigned int regnum; /* Register number */ + unsigned long base; /* Base address */ + unsigned int size; /* Size of region */ + unsigned int type; /* Type of region */ +}; + +/* These are the various ioctls */ +#define MTRRIOC_ADD_ENTRY _IOW(MTRR_IOCTL_BASE, 0, struct mtrr_sentry) +#define MTRRIOC_SET_ENTRY _IOW(MTRR_IOCTL_BASE, 1, struct mtrr_sentry) +#define MTRRIOC_DEL_ENTRY _IOW(MTRR_IOCTL_BASE, 2, struct mtrr_sentry) +#define MTRRIOC_GET_ENTRY _IOWR(MTRR_IOCTL_BASE, 3, struct mtrr_gentry) +#define MTRRIOC_KILL_ENTRY _IOW(MTRR_IOCTL_BASE, 4, struct mtrr_sentry) +#define MTRRIOC_ADD_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 5, struct mtrr_sentry) +#define MTRRIOC_SET_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 6, struct mtrr_sentry) +#define MTRRIOC_DEL_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 7, struct mtrr_sentry) +#define MTRRIOC_GET_PAGE_ENTRY _IOWR(MTRR_IOCTL_BASE, 8, struct mtrr_gentry) +#define MTRRIOC_KILL_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 9, struct mtrr_sentry) + +/* These are the region types */ +#define MTRR_TYPE_UNCACHABLE 0 +#define MTRR_TYPE_WRCOMB 1 +/*#define MTRR_TYPE_ 2*/ +/*#define MTRR_TYPE_ 3*/ +#define MTRR_TYPE_WRTHROUGH 4 +#define MTRR_TYPE_WRPROT 5 +#define MTRR_TYPE_WRBACK 6 +#define MTRR_NUM_TYPES 7 + +#ifdef __KERNEL__ + +/* The following functions are for use by other drivers */ +# ifdef CONFIG_MTRR +extern int mtrr_add (unsigned long base, unsigned long size, + unsigned int type, char increment); +extern int mtrr_add_page (unsigned long base, unsigned long size, + unsigned int type, char increment); +extern int mtrr_del (int reg, unsigned long base, unsigned long size); +extern int mtrr_del_page (int reg, unsigned long base, unsigned long size); +extern void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi); +# else +static __inline__ int mtrr_add (unsigned long base, unsigned long size, + unsigned int type, char increment) +{ + return -ENODEV; +} +static __inline__ int mtrr_add_page (unsigned long base, unsigned long size, + unsigned int type, char increment) +{ + return -ENODEV; +} +static __inline__ int mtrr_del (int reg, unsigned long base, + unsigned long size) +{ + return -ENODEV; +} +static __inline__ int mtrr_del_page (int reg, unsigned long base, + unsigned long size) +{ + return -ENODEV; +} + +static __inline__ void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi) {;} + +# endif + +#endif + +#endif /* _LINUX_MTRR_H */ diff --git a/include/asm-i386/namei.h b/include/asm-i386/namei.h new file mode 100644 index 00000000000..81486508861 --- /dev/null +++ b/include/asm-i386/namei.h @@ -0,0 +1,17 @@ +/* $Id: namei.h,v 1.1 1996/12/13 14:48:21 jj Exp $ + * linux/include/asm-i386/namei.h + * + * Included from linux/fs/namei.c + */ + +#ifndef __I386_NAMEI_H +#define __I386_NAMEI_H + +/* This dummy routine maybe changed to something useful + * for /usr/gnemul/ emulation stuff. + * Look at asm-sparc/namei.h for details. + */ + +#define __emul_prefix() NULL + +#endif /* __I386_NAMEI_H */ diff --git a/include/asm-i386/nmi.h b/include/asm-i386/nmi.h new file mode 100644 index 00000000000..21f16638fc6 --- /dev/null +++ b/include/asm-i386/nmi.h @@ -0,0 +1,28 @@ +/* + * linux/include/asm-i386/nmi.h + */ +#ifndef ASM_NMI_H +#define ASM_NMI_H + +#include + +struct pt_regs; + +typedef int (*nmi_callback_t)(struct pt_regs * regs, int cpu); + +/** + * set_nmi_callback + * + * Set a handler for an NMI. Only one handler may be + * set. Return 1 if the NMI was handled. + */ +void set_nmi_callback(nmi_callback_t callback); + +/** + * unset_nmi_callback + * + * Remove the handler previously set. + */ +void unset_nmi_callback(void); + +#endif /* ASM_NMI_H */ diff --git a/include/asm-i386/node.h b/include/asm-i386/node.h new file mode 100644 index 00000000000..e13c6ffa72a --- /dev/null +++ b/include/asm-i386/node.h @@ -0,0 +1,29 @@ +#ifndef _ASM_I386_NODE_H_ +#define _ASM_I386_NODE_H_ + +#include +#include +#include +#include +#include + +struct i386_node { + struct node node; +}; +extern struct i386_node node_devices[MAX_NUMNODES]; + +static inline int arch_register_node(int num){ + int p_node; + struct node *parent = NULL; + + if (!node_online(num)) + return 0; + p_node = parent_node(num); + + if (p_node != num) + parent = &node_devices[p_node].node; + + return register_node(&node_devices[num].node, num, parent); +} + +#endif /* _ASM_I386_NODE_H_ */ diff --git a/include/asm-i386/numaq.h b/include/asm-i386/numaq.h new file mode 100644 index 00000000000..38f710dc37f --- /dev/null +++ b/include/asm-i386/numaq.h @@ -0,0 +1,164 @@ +/* + * Written by: Patricia Gaughen, IBM Corporation + * + * Copyright (C) 2002, IBM Corp. + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to + */ + +#ifndef NUMAQ_H +#define NUMAQ_H + +#ifdef CONFIG_X86_NUMAQ + +extern int get_memcfg_numaq(void); + +/* + * SYS_CFG_DATA_PRIV_ADDR, struct eachquadmem, and struct sys_cfg_data are the + */ +#define SYS_CFG_DATA_PRIV_ADDR 0x0009d000 /* place for scd in private quad space */ + +/* + * Communication area for each processor on lynxer-processor tests. + * + * NOTE: If you change the size of this eachproc structure you need + * to change the definition for EACH_QUAD_SIZE. + */ +struct eachquadmem { + unsigned int priv_mem_start; /* Starting address of this */ + /* quad's private memory. */ + /* This is always 0. */ + /* In MB. */ + unsigned int priv_mem_size; /* Size of this quad's */ + /* private memory. */ + /* In MB. */ + unsigned int low_shrd_mem_strp_start;/* Starting address of this */ + /* quad's low shared block */ + /* (untranslated). */ + /* In MB. */ + unsigned int low_shrd_mem_start; /* Starting address of this */ + /* quad's low shared memory */ + /* (untranslated). */ + /* In MB. */ + unsigned int low_shrd_mem_size; /* Size of this quad's low */ + /* shared memory. */ + /* In MB. */ + unsigned int lmmio_copb_start; /* Starting address of this */ + /* quad's local memory */ + /* mapped I/O in the */ + /* compatibility OPB. */ + /* In MB. */ + unsigned int lmmio_copb_size; /* Size of this quad's local */ + /* memory mapped I/O in the */ + /* compatibility OPB. */ + /* In MB. */ + unsigned int lmmio_nopb_start; /* Starting address of this */ + /* quad's local memory */ + /* mapped I/O in the */ + /* non-compatibility OPB. */ + /* In MB. */ + unsigned int lmmio_nopb_size; /* Size of this quad's local */ + /* memory mapped I/O in the */ + /* non-compatibility OPB. */ + /* In MB. */ + unsigned int io_apic_0_start; /* Starting address of I/O */ + /* APIC 0. */ + unsigned int io_apic_0_sz; /* Size I/O APIC 0. */ + unsigned int io_apic_1_start; /* Starting address of I/O */ + /* APIC 1. */ + unsigned int io_apic_1_sz; /* Size I/O APIC 1. */ + unsigned int hi_shrd_mem_start; /* Starting address of this */ + /* quad's high shared memory.*/ + /* In MB. */ + unsigned int hi_shrd_mem_size; /* Size of this quad's high */ + /* shared memory. */ + /* In MB. */ + unsigned int mps_table_addr; /* Address of this quad's */ + /* MPS tables from BIOS, */ + /* in system space.*/ + unsigned int lcl_MDC_pio_addr; /* Port-I/O address for */ + /* local access of MDC. */ + unsigned int rmt_MDC_mmpio_addr; /* MM-Port-I/O address for */ + /* remote access of MDC. */ + unsigned int mm_port_io_start; /* Starting address of this */ + /* quad's memory mapped Port */ + /* I/O space. */ + unsigned int mm_port_io_size; /* Size of this quad's memory*/ + /* mapped Port I/O space. */ + unsigned int mm_rmt_io_apic_start; /* Starting address of this */ + /* quad's memory mapped */ + /* remote I/O APIC space. */ + unsigned int mm_rmt_io_apic_size; /* Size of this quad's memory*/ + /* mapped remote I/O APIC */ + /* space. */ + unsigned int mm_isa_start; /* Starting address of this */ + /* quad's memory mapped ISA */ + /* space (contains MDC */ + /* memory space). */ + unsigned int mm_isa_size; /* Size of this quad's memory*/ + /* mapped ISA space (contains*/ + /* MDC memory space). */ + unsigned int rmt_qmi_addr; /* Remote addr to access QMI.*/ + unsigned int lcl_qmi_addr; /* Local addr to access QMI. */ +}; + +/* + * Note: This structure must be NOT be changed unless the multiproc and + * OS are changed to reflect the new structure. + */ +struct sys_cfg_data { + unsigned int quad_id; + unsigned int bsp_proc_id; /* Boot Strap Processor in this quad. */ + unsigned int scd_version; /* Version number of this table. */ + unsigned int first_quad_id; + unsigned int quads_present31_0; /* 1 bit for each quad */ + unsigned int quads_present63_32; /* 1 bit for each quad */ + unsigned int config_flags; + unsigned int boot_flags; + unsigned int csr_start_addr; /* Absolute value (not in MB) */ + unsigned int csr_size; /* Absolute value (not in MB) */ + unsigned int lcl_apic_start_addr; /* Absolute value (not in MB) */ + unsigned int lcl_apic_size; /* Absolute value (not in MB) */ + unsigned int low_shrd_mem_base; /* 0 or 512MB or 1GB */ + unsigned int low_shrd_mem_quad_offset; /* 0,128M,256M,512M,1G */ + /* may not be totally populated */ + unsigned int split_mem_enbl; /* 0 for no low shared memory */ + unsigned int mmio_sz; /* Size of total system memory mapped I/O */ + /* (in MB). */ + unsigned int quad_spin_lock; /* Spare location used for quad */ + /* bringup. */ + unsigned int nonzero55; /* For checksumming. */ + unsigned int nonzeroaa; /* For checksumming. */ + unsigned int scd_magic_number; + unsigned int system_type; + unsigned int checksum; + /* + * memory configuration area for each quad + */ + struct eachquadmem eq[MAX_NUMNODES]; /* indexed by quad id */ +}; + +static inline unsigned long *get_zholes_size(int nid) +{ + return NULL; +} +#endif /* CONFIG_X86_NUMAQ */ +#endif /* NUMAQ_H */ + diff --git a/include/asm-i386/numnodes.h b/include/asm-i386/numnodes.h new file mode 100644 index 00000000000..a61f38c8176 --- /dev/null +++ b/include/asm-i386/numnodes.h @@ -0,0 +1,18 @@ +#ifndef _ASM_MAX_NUMNODES_H +#define _ASM_MAX_NUMNODES_H + +#include + +#ifdef CONFIG_X86_NUMAQ + +/* Max 16 Nodes */ +#define NODES_SHIFT 4 + +#elif defined(CONFIG_ACPI_SRAT) + +/* Max 8 Nodes */ +#define NODES_SHIFT 3 + +#endif /* CONFIG_X86_NUMAQ */ + +#endif /* _ASM_MAX_NUMNODES_H */ diff --git a/include/asm-i386/page.h b/include/asm-i386/page.h new file mode 100644 index 00000000000..ed13969fa2d --- /dev/null +++ b/include/asm-i386/page.h @@ -0,0 +1,153 @@ +#ifndef _I386_PAGE_H +#define _I386_PAGE_H + +/* PAGE_SHIFT determines the page size */ +#define PAGE_SHIFT 12 +#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) + +#define LARGE_PAGE_MASK (~(LARGE_PAGE_SIZE-1)) +#define LARGE_PAGE_SIZE (1UL << PMD_SHIFT) + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +#include + +#ifdef CONFIG_X86_USE_3DNOW + +#include + +#define clear_page(page) mmx_clear_page((void *)(page)) +#define copy_page(to,from) mmx_copy_page(to,from) + +#else + +/* + * On older X86 processors it's not a win to use MMX here it seems. + * Maybe the K6-III ? + */ + +#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE) +#define copy_page(to,from) memcpy((void *)(to), (void *)(from), PAGE_SIZE) + +#endif + +#define clear_user_page(page, vaddr, pg) clear_page(page) +#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) + +#define alloc_zeroed_user_highpage(vma, vaddr) alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO, vma, vaddr) +#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE + +/* + * These are used to make use of C type-checking.. + */ +extern int nx_enabled; +#ifdef CONFIG_X86_PAE +extern unsigned long long __supported_pte_mask; +typedef struct { unsigned long pte_low, pte_high; } pte_t; +typedef struct { unsigned long long pmd; } pmd_t; +typedef struct { unsigned long long pgd; } pgd_t; +typedef struct { unsigned long long pgprot; } pgprot_t; +#define pmd_val(x) ((x).pmd) +#define pte_val(x) ((x).pte_low | ((unsigned long long)(x).pte_high << 32)) +#define __pmd(x) ((pmd_t) { (x) } ) +#define HPAGE_SHIFT 21 +#else +typedef struct { unsigned long pte_low; } pte_t; +typedef struct { unsigned long pgd; } pgd_t; +typedef struct { unsigned long pgprot; } pgprot_t; +#define boot_pte_t pte_t /* or would you rather have a typedef */ +#define pte_val(x) ((x).pte_low) +#define HPAGE_SHIFT 22 +#endif +#define PTE_MASK PAGE_MASK + +#ifdef CONFIG_HUGETLB_PAGE +#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) +#define HPAGE_MASK (~(HPAGE_SIZE - 1)) +#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) +#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA +#endif + +#define pgd_val(x) ((x).pgd) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pgd(x) ((pgd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +#endif /* !__ASSEMBLY__ */ + +/* to align the pointer to the (next) page boundary */ +#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) + +/* + * This handles the memory map.. We could make this a config + * option, but too many people screw it up, and too few need + * it. + * + * A __PAGE_OFFSET of 0xC0000000 means that the kernel has + * a virtual address space of one gigabyte, which limits the + * amount of physical memory you can use to about 950MB. + * + * If you want more physical memory than this then see the CONFIG_HIGHMEM4G + * and CONFIG_HIGHMEM64G options in the kernel configuration. + */ + +#ifndef __ASSEMBLY__ + +/* + * This much address space is reserved for vmalloc() and iomap() + * as well as fixmap mappings. + */ +extern unsigned int __VMALLOC_RESERVE; + +/* Pure 2^n version of get_order */ +static __inline__ int get_order(unsigned long size) +{ + int order; + + size = (size-1) >> (PAGE_SHIFT-1); + order = -1; + do { + size >>= 1; + order++; + } while (size); + return order; +} + +extern int sysctl_legacy_va_layout; + +#endif /* __ASSEMBLY__ */ + +#ifdef __ASSEMBLY__ +#define __PAGE_OFFSET (0xC0000000) +#else +#define __PAGE_OFFSET (0xC0000000UL) +#endif + + +#define PAGE_OFFSET ((unsigned long)__PAGE_OFFSET) +#define VMALLOC_RESERVE ((unsigned long)__VMALLOC_RESERVE) +#define MAXMEM (-__PAGE_OFFSET-__VMALLOC_RESERVE) +#define __pa(x) ((unsigned long)(x)-PAGE_OFFSET) +#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET)) +#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) +#ifndef CONFIG_DISCONTIGMEM +#define pfn_to_page(pfn) (mem_map + (pfn)) +#define page_to_pfn(page) ((unsigned long)((page) - mem_map)) +#define pfn_valid(pfn) ((pfn) < max_mapnr) +#endif /* !CONFIG_DISCONTIGMEM */ +#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) + +#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) + +#define VM_DATA_DEFAULT_FLAGS \ + (VM_READ | VM_WRITE | \ + ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#endif /* __KERNEL__ */ + +#endif /* _I386_PAGE_H */ diff --git a/include/asm-i386/param.h b/include/asm-i386/param.h new file mode 100644 index 00000000000..b6440526e42 --- /dev/null +++ b/include/asm-i386/param.h @@ -0,0 +1,23 @@ +#ifndef _ASMi386_PARAM_H +#define _ASMi386_PARAM_H + +#ifdef __KERNEL__ +# define HZ 1000 /* Internal kernel timer frequency */ +# define USER_HZ 100 /* .. some user interfaces are in "ticks" */ +# define CLOCKS_PER_SEC (USER_HZ) /* like times() */ +#endif + +#ifndef HZ +#define HZ 100 +#endif + +#define EXEC_PAGESIZE 4096 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ +#define COMMAND_LINE_SIZE 256 + +#endif diff --git a/include/asm-i386/parport.h b/include/asm-i386/parport.h new file mode 100644 index 00000000000..fa0e321e498 --- /dev/null +++ b/include/asm-i386/parport.h @@ -0,0 +1,18 @@ +/* + * parport.h: ia32-specific parport initialisation + * + * Copyright (C) 1999, 2000 Tim Waugh + * + * This file should only be included by drivers/parport/parport_pc.c. + */ + +#ifndef _ASM_I386_PARPORT_H +#define _ASM_I386_PARPORT_H 1 + +static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma); +static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma) +{ + return parport_pc_find_isa_ports (autoirq, autodma); +} + +#endif /* !(_ASM_I386_PARPORT_H) */ diff --git a/include/asm-i386/pci-direct.h b/include/asm-i386/pci-direct.h new file mode 100644 index 00000000000..4f6738b0820 --- /dev/null +++ b/include/asm-i386/pci-direct.h @@ -0,0 +1 @@ +#include "asm-x86_64/pci-direct.h" diff --git a/include/asm-i386/pci.h b/include/asm-i386/pci.h new file mode 100644 index 00000000000..fb749b85a73 --- /dev/null +++ b/include/asm-i386/pci.h @@ -0,0 +1,110 @@ +#ifndef __i386_PCI_H +#define __i386_PCI_H + +#include + +#ifdef __KERNEL__ +#include /* for struct page */ + +/* Can be used to override the logic in pci_scan_bus for skipping + already-configured bus numbers - to be used for buggy BIOSes + or architectures with incomplete PCI setup by the loader */ + +#ifdef CONFIG_PCI +extern unsigned int pcibios_assign_all_busses(void); +#else +#define pcibios_assign_all_busses() 0 +#endif +#define pcibios_scan_all_fns(a, b) 0 + +extern unsigned long pci_mem_start; +#define PCIBIOS_MIN_IO 0x1000 +#define PCIBIOS_MIN_MEM (pci_mem_start) + +#define PCIBIOS_MIN_CARDBUS_IO 0x4000 + +void pcibios_config_init(void); +struct pci_bus * pcibios_scan_root(int bus); + +void pcibios_set_master(struct pci_dev *dev); +void pcibios_penalize_isa_irq(int irq); +struct irq_routing_table *pcibios_get_irq_routing_table(void); +int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq); + +/* Dynamic DMA mapping stuff. + * i386 has everything mapped statically. + */ + +#include +#include +#include +#include +#include + +struct pci_dev; + +/* The PCI address space does equal the physical memory + * address space. The networking and block device layers use + * this boolean for bounce buffer decisions. + */ +#define PCI_DMA_BUS_IS_PHYS (1) + +/* pci_unmap_{page,single} is a nop so... */ +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) +#define pci_unmap_addr(PTR, ADDR_NAME) (0) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) +#define pci_unmap_len(PTR, LEN_NAME) (0) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) + +/* This is always fine. */ +#define pci_dac_dma_supported(pci_dev, mask) (1) + +static inline dma64_addr_t +pci_dac_page_to_dma(struct pci_dev *pdev, struct page *page, unsigned long offset, int direction) +{ + return ((dma64_addr_t) page_to_phys(page) + + (dma64_addr_t) offset); +} + +static inline struct page * +pci_dac_dma_to_page(struct pci_dev *pdev, dma64_addr_t dma_addr) +{ + return pfn_to_page(dma_addr >> PAGE_SHIFT); +} + +static inline unsigned long +pci_dac_dma_to_offset(struct pci_dev *pdev, dma64_addr_t dma_addr) +{ + return (dma_addr & ~PAGE_MASK); +} + +static inline void +pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction) +{ +} + +static inline void +pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction) +{ + flush_write_buffers(); +} + +#define HAVE_PCI_MMAP +extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine); + + +static inline void pcibios_add_platform_entries(struct pci_dev *dev) +{ +} + +#endif /* __KERNEL__ */ + +/* implement the pci_ DMA API in terms of the generic device dma_ one */ +#include + +/* generic pci stuff */ +#include + +#endif /* __i386_PCI_H */ diff --git a/include/asm-i386/percpu.h b/include/asm-i386/percpu.h new file mode 100644 index 00000000000..5764afa4b6a --- /dev/null +++ b/include/asm-i386/percpu.h @@ -0,0 +1,6 @@ +#ifndef __ARCH_I386_PERCPU__ +#define __ARCH_I386_PERCPU__ + +#include + +#endif /* __ARCH_I386_PERCPU__ */ diff --git a/include/asm-i386/pgalloc.h b/include/asm-i386/pgalloc.h new file mode 100644 index 00000000000..0380c3dc1f7 --- /dev/null +++ b/include/asm-i386/pgalloc.h @@ -0,0 +1,50 @@ +#ifndef _I386_PGALLOC_H +#define _I386_PGALLOC_H + +#include +#include +#include +#include /* for struct page */ + +#define pmd_populate_kernel(mm, pmd, pte) \ + set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(pte))) + +#define pmd_populate(mm, pmd, pte) \ + set_pmd(pmd, __pmd(_PAGE_TABLE + \ + ((unsigned long long)page_to_pfn(pte) << \ + (unsigned long long) PAGE_SHIFT))) +/* + * Allocate and free page tables. + */ +extern pgd_t *pgd_alloc(struct mm_struct *); +extern void pgd_free(pgd_t *pgd); + +extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long); +extern struct page *pte_alloc_one(struct mm_struct *, unsigned long); + +static inline void pte_free_kernel(pte_t *pte) +{ + free_page((unsigned long)pte); +} + +static inline void pte_free(struct page *pte) +{ + __free_page(pte); +} + + +#define __pte_free_tlb(tlb,pte) tlb_remove_page((tlb),(pte)) + +#ifdef CONFIG_X86_PAE +/* + * In the PAE case we free the pmds as part of the pgd. + */ +#define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *)2); }) +#define pmd_free(x) do { } while (0) +#define __pmd_free_tlb(tlb,x) do { } while (0) +#define pud_populate(mm, pmd, pte) BUG() +#endif + +#define check_pgt_cache() do { } while (0) + +#endif /* _I386_PGALLOC_H */ diff --git a/include/asm-i386/pgtable-2level-defs.h b/include/asm-i386/pgtable-2level-defs.h new file mode 100644 index 00000000000..02518079f81 --- /dev/null +++ b/include/asm-i386/pgtable-2level-defs.h @@ -0,0 +1,18 @@ +#ifndef _I386_PGTABLE_2LEVEL_DEFS_H +#define _I386_PGTABLE_2LEVEL_DEFS_H + +/* + * traditional i386 two-level paging structure: + */ + +#define PGDIR_SHIFT 22 +#define PTRS_PER_PGD 1024 + +/* + * the i386 is two-level, so we don't really have any + * PMD directory physically. + */ + +#define PTRS_PER_PTE 1024 + +#endif /* _I386_PGTABLE_2LEVEL_DEFS_H */ diff --git a/include/asm-i386/pgtable-2level.h b/include/asm-i386/pgtable-2level.h new file mode 100644 index 00000000000..fa07bd6c752 --- /dev/null +++ b/include/asm-i386/pgtable-2level.h @@ -0,0 +1,69 @@ +#ifndef _I386_PGTABLE_2LEVEL_H +#define _I386_PGTABLE_2LEVEL_H + +#include + +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, (e).pte_low) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) + +/* + * Certain architectures need to do special things when PTEs + * within a page table are directly modified. Thus, the following + * hook is made available. + */ +#define set_pte(pteptr, pteval) (*(pteptr) = pteval) +#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) +#define set_pte_atomic(pteptr, pteval) set_pte(pteptr,pteval) +#define set_pmd(pmdptr, pmdval) (*(pmdptr) = (pmdval)) + +#define ptep_get_and_clear(mm,addr,xp) __pte(xchg(&(xp)->pte_low, 0)) +#define pte_same(a, b) ((a).pte_low == (b).pte_low) +#define pte_page(x) pfn_to_page(pte_pfn(x)) +#define pte_none(x) (!(x).pte_low) +#define pte_pfn(x) ((unsigned long)(((x).pte_low >> PAGE_SHIFT))) +#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) + +#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)) + +#define pmd_page_kernel(pmd) \ +((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) + +/* + * All present user pages are user-executable: + */ +static inline int pte_exec(pte_t pte) +{ + return pte_user(pte); +} + +/* + * All present pages are kernel-executable: + */ +static inline int pte_exec_kernel(pte_t pte) +{ + return 1; +} + +/* + * Bits 0, 6 and 7 are taken, split up the 29 bits of offset + * into this range: + */ +#define PTE_FILE_MAX_BITS 29 + +#define pte_to_pgoff(pte) \ + ((((pte).pte_low >> 1) & 0x1f ) + (((pte).pte_low >> 8) << 5 )) + +#define pgoff_to_pte(off) \ + ((pte_t) { (((off) & 0x1f) << 1) + (((off) >> 5) << 8) + _PAGE_FILE }) + +/* Encode and de-code a swap entry */ +#define __swp_type(x) (((x).val >> 1) & 0x1f) +#define __swp_offset(x) ((x).val >> 8) +#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 1) | ((offset) << 8) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte_low }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +#endif /* _I386_PGTABLE_2LEVEL_H */ diff --git a/include/asm-i386/pgtable-3level-defs.h b/include/asm-i386/pgtable-3level-defs.h new file mode 100644 index 00000000000..eb3a1ea8867 --- /dev/null +++ b/include/asm-i386/pgtable-3level-defs.h @@ -0,0 +1,22 @@ +#ifndef _I386_PGTABLE_3LEVEL_DEFS_H +#define _I386_PGTABLE_3LEVEL_DEFS_H + +/* + * PGDIR_SHIFT determines what a top-level page table entry can map + */ +#define PGDIR_SHIFT 30 +#define PTRS_PER_PGD 4 + +/* + * PMD_SHIFT determines the size of the area a middle-level + * page table can map + */ +#define PMD_SHIFT 21 +#define PTRS_PER_PMD 512 + +/* + * entries per page directory level + */ +#define PTRS_PER_PTE 512 + +#endif /* _I386_PGTABLE_3LEVEL_DEFS_H */ diff --git a/include/asm-i386/pgtable-3level.h b/include/asm-i386/pgtable-3level.h new file mode 100644 index 00000000000..d609f9c2c1f --- /dev/null +++ b/include/asm-i386/pgtable-3level.h @@ -0,0 +1,160 @@ +#ifndef _I386_PGTABLE_3LEVEL_H +#define _I386_PGTABLE_3LEVEL_H + +#include + +/* + * Intel Physical Address Extension (PAE) Mode - three-level page + * tables on PPro+ CPUs. + * + * Copyright (C) 1999 Ingo Molnar + */ + +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, &(e), (e).pte_high, (e).pte_low) +#define pmd_ERROR(e) \ + printk("%s:%d: bad pmd %p(%016Lx).\n", __FILE__, __LINE__, &(e), pmd_val(e)) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %p(%016Lx).\n", __FILE__, __LINE__, &(e), pgd_val(e)) + +#define pud_none(pud) 0 +#define pud_bad(pud) 0 +#define pud_present(pud) 1 + +/* + * Is the pte executable? + */ +static inline int pte_x(pte_t pte) +{ + return !(pte_val(pte) & _PAGE_NX); +} + +/* + * All present user-pages with !NX bit are user-executable: + */ +static inline int pte_exec(pte_t pte) +{ + return pte_user(pte) && pte_x(pte); +} +/* + * All present pages with !NX bit are kernel-executable: + */ +static inline int pte_exec_kernel(pte_t pte) +{ + return pte_x(pte); +} + +/* Rules for using set_pte: the pte being assigned *must* be + * either not present or in a state where the hardware will + * not attempt to update the pte. In places where this is + * not possible, use pte_get_and_clear to obtain the old pte + * value and then use set_pte to update it. -ben + */ +static inline void set_pte(pte_t *ptep, pte_t pte) +{ + ptep->pte_high = pte.pte_high; + smp_wmb(); + ptep->pte_low = pte.pte_low; +} +#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) + +#define __HAVE_ARCH_SET_PTE_ATOMIC +#define set_pte_atomic(pteptr,pteval) \ + set_64bit((unsigned long long *)(pteptr),pte_val(pteval)) +#define set_pmd(pmdptr,pmdval) \ + set_64bit((unsigned long long *)(pmdptr),pmd_val(pmdval)) +#define set_pud(pudptr,pudval) \ + set_64bit((unsigned long long *)(pudptr),pud_val(pudval)) + +/* + * Pentium-II erratum A13: in PAE mode we explicitly have to flush + * the TLB via cr3 if the top-level pgd is changed... + * We do not let the generic code free and clear pgd entries due to + * this erratum. + */ +static inline void pud_clear (pud_t * pud) { } + +#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)) + +#define pmd_page_kernel(pmd) \ +((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) + +#define pud_page(pud) \ +((struct page *) __va(pud_val(pud) & PAGE_MASK)) + +#define pud_page_kernel(pud) \ +((unsigned long) __va(pud_val(pud) & PAGE_MASK)) + + +/* Find an entry in the second-level page table.. */ +#define pmd_offset(pud, address) ((pmd_t *) pud_page(*(pud)) + \ + pmd_index(address)) + +static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + pte_t res; + + /* xchg acts as a barrier before the setting of the high bits */ + res.pte_low = xchg(&ptep->pte_low, 0); + res.pte_high = ptep->pte_high; + ptep->pte_high = 0; + + return res; +} + +static inline int pte_same(pte_t a, pte_t b) +{ + return a.pte_low == b.pte_low && a.pte_high == b.pte_high; +} + +#define pte_page(x) pfn_to_page(pte_pfn(x)) + +static inline int pte_none(pte_t pte) +{ + return !pte.pte_low && !pte.pte_high; +} + +static inline unsigned long pte_pfn(pte_t pte) +{ + return (pte.pte_low >> PAGE_SHIFT) | + (pte.pte_high << (32 - PAGE_SHIFT)); +} + +extern unsigned long long __supported_pte_mask; + +static inline pte_t pfn_pte(unsigned long page_nr, pgprot_t pgprot) +{ + pte_t pte; + + pte.pte_high = (page_nr >> (32 - PAGE_SHIFT)) | \ + (pgprot_val(pgprot) >> 32); + pte.pte_high &= (__supported_pte_mask >> 32); + pte.pte_low = ((page_nr << PAGE_SHIFT) | pgprot_val(pgprot)) & \ + __supported_pte_mask; + return pte; +} + +static inline pmd_t pfn_pmd(unsigned long page_nr, pgprot_t pgprot) +{ + return __pmd((((unsigned long long)page_nr << PAGE_SHIFT) | \ + pgprot_val(pgprot)) & __supported_pte_mask); +} + +/* + * Bits 0, 6 and 7 are taken in the low part of the pte, + * put the 32 bits of offset into the high part. + */ +#define pte_to_pgoff(pte) ((pte).pte_high) +#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) }) +#define PTE_FILE_MAX_BITS 32 + +/* Encode and de-code a swap entry */ +#define __swp_type(x) (((x).val) & 0x1f) +#define __swp_offset(x) ((x).val >> 5) +#define __swp_entry(type, offset) ((swp_entry_t){(type) | (offset) << 5}) +#define __pte_to_swp_entry(pte) ((swp_entry_t){ (pte).pte_high }) +#define __swp_entry_to_pte(x) ((pte_t){ 0, (x).val }) + +#define __pmd_free_tlb(tlb, x) do { } while (0) + +#endif /* _I386_PGTABLE_3LEVEL_H */ diff --git a/include/asm-i386/pgtable.h b/include/asm-i386/pgtable.h new file mode 100644 index 00000000000..488c2b4befa --- /dev/null +++ b/include/asm-i386/pgtable.h @@ -0,0 +1,422 @@ +#ifndef _I386_PGTABLE_H +#define _I386_PGTABLE_H + +#include + +/* + * The Linux memory management assumes a three-level page table setup. On + * the i386, we use that, but "fold" the mid level into the top-level page + * table, so that we physically have the same two-level page table as the + * i386 mmu expects. + * + * This file contains the functions and defines necessary to modify and use + * the i386 page table tree. + */ +#ifndef __ASSEMBLY__ +#include +#include +#include + +#ifndef _I386_BITOPS_H +#include +#endif + +#include +#include +#include + +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) +extern unsigned long empty_zero_page[1024]; +extern pgd_t swapper_pg_dir[1024]; +extern kmem_cache_t *pgd_cache; +extern kmem_cache_t *pmd_cache; +extern spinlock_t pgd_lock; +extern struct page *pgd_list; + +void pmd_ctor(void *, kmem_cache_t *, unsigned long); +void pgd_ctor(void *, kmem_cache_t *, unsigned long); +void pgd_dtor(void *, kmem_cache_t *, unsigned long); +void pgtable_cache_init(void); +void paging_init(void); + +/* + * The Linux x86 paging architecture is 'compile-time dual-mode', it + * implements both the traditional 2-level x86 page tables and the + * newer 3-level PAE-mode page tables. + */ +#ifdef CONFIG_X86_PAE +# include +# define PMD_SIZE (1UL << PMD_SHIFT) +# define PMD_MASK (~(PMD_SIZE-1)) +#else +# include +#endif + +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE) +#define FIRST_USER_PGD_NR 0 + +#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT) +#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS) + +#define TWOLEVEL_PGDIR_SHIFT 22 +#define BOOT_USER_PGD_PTRS (__PAGE_OFFSET >> TWOLEVEL_PGDIR_SHIFT) +#define BOOT_KERNEL_PGD_PTRS (1024-BOOT_USER_PGD_PTRS) + +/* Just any arbitrary offset to the start of the vmalloc VM area: the + * current 8MB value just means that there will be a 8MB "hole" after the + * physical memory until the kernel virtual memory starts. That means that + * any out-of-bounds memory accesses will hopefully be caught. + * The vmalloc() routines leaves a hole of 4kB between each vmalloced + * area for the same reason. ;) + */ +#define VMALLOC_OFFSET (8*1024*1024) +#define VMALLOC_START (((unsigned long) high_memory + vmalloc_earlyreserve + \ + 2*VMALLOC_OFFSET-1) & ~(VMALLOC_OFFSET-1)) +#ifdef CONFIG_HIGHMEM +# define VMALLOC_END (PKMAP_BASE-2*PAGE_SIZE) +#else +# define VMALLOC_END (FIXADDR_START-2*PAGE_SIZE) +#endif + +/* + * The 4MB page is guessing.. Detailed in the infamous "Chapter H" + * of the Pentium details, but assuming intel did the straightforward + * thing, this bit set in the page directory entry just means that + * the page directory entry points directly to a 4MB-aligned block of + * memory. + */ +#define _PAGE_BIT_PRESENT 0 +#define _PAGE_BIT_RW 1 +#define _PAGE_BIT_USER 2 +#define _PAGE_BIT_PWT 3 +#define _PAGE_BIT_PCD 4 +#define _PAGE_BIT_ACCESSED 5 +#define _PAGE_BIT_DIRTY 6 +#define _PAGE_BIT_PSE 7 /* 4 MB (or 2MB) page, Pentium+, if present.. */ +#define _PAGE_BIT_GLOBAL 8 /* Global TLB entry PPro+ */ +#define _PAGE_BIT_UNUSED1 9 /* available for programmer */ +#define _PAGE_BIT_UNUSED2 10 +#define _PAGE_BIT_UNUSED3 11 +#define _PAGE_BIT_NX 63 + +#define _PAGE_PRESENT 0x001 +#define _PAGE_RW 0x002 +#define _PAGE_USER 0x004 +#define _PAGE_PWT 0x008 +#define _PAGE_PCD 0x010 +#define _PAGE_ACCESSED 0x020 +#define _PAGE_DIRTY 0x040 +#define _PAGE_PSE 0x080 /* 4 MB (or 2MB) page, Pentium+, if present.. */ +#define _PAGE_GLOBAL 0x100 /* Global TLB entry PPro+ */ +#define _PAGE_UNUSED1 0x200 /* available for programmer */ +#define _PAGE_UNUSED2 0x400 +#define _PAGE_UNUSED3 0x800 + +#define _PAGE_FILE 0x040 /* set:pagecache unset:swap */ +#define _PAGE_PROTNONE 0x080 /* If not present */ +#ifdef CONFIG_X86_PAE +#define _PAGE_NX (1ULL<<_PAGE_BIT_NX) +#else +#define _PAGE_NX 0 +#endif + +#define _PAGE_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED | _PAGE_DIRTY) +#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY) +#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) + +#define PAGE_NONE \ + __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED) +#define PAGE_SHARED \ + __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED) + +#define PAGE_SHARED_EXEC \ + __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED) +#define PAGE_COPY_NOEXEC \ + __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | _PAGE_NX) +#define PAGE_COPY_EXEC \ + __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED) +#define PAGE_COPY \ + PAGE_COPY_NOEXEC +#define PAGE_READONLY \ + __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | _PAGE_NX) +#define PAGE_READONLY_EXEC \ + __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED) + +#define _PAGE_KERNEL \ + (_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_NX) +#define _PAGE_KERNEL_EXEC \ + (_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED) + +extern unsigned long long __PAGE_KERNEL, __PAGE_KERNEL_EXEC; +#define __PAGE_KERNEL_RO (__PAGE_KERNEL & ~_PAGE_RW) +#define __PAGE_KERNEL_NOCACHE (__PAGE_KERNEL | _PAGE_PCD) +#define __PAGE_KERNEL_LARGE (__PAGE_KERNEL | _PAGE_PSE) +#define __PAGE_KERNEL_LARGE_EXEC (__PAGE_KERNEL_EXEC | _PAGE_PSE) + +#define PAGE_KERNEL __pgprot(__PAGE_KERNEL) +#define PAGE_KERNEL_RO __pgprot(__PAGE_KERNEL_RO) +#define PAGE_KERNEL_EXEC __pgprot(__PAGE_KERNEL_EXEC) +#define PAGE_KERNEL_NOCACHE __pgprot(__PAGE_KERNEL_NOCACHE) +#define PAGE_KERNEL_LARGE __pgprot(__PAGE_KERNEL_LARGE) +#define PAGE_KERNEL_LARGE_EXEC __pgprot(__PAGE_KERNEL_LARGE_EXEC) + +/* + * The i386 can't do page protection for execute, and considers that + * the same are read. Also, write permissions imply read permissions. + * This is the closest we can get.. + */ +#define __P000 PAGE_NONE +#define __P001 PAGE_READONLY +#define __P010 PAGE_COPY +#define __P011 PAGE_COPY +#define __P100 PAGE_READONLY_EXEC +#define __P101 PAGE_READONLY_EXEC +#define __P110 PAGE_COPY_EXEC +#define __P111 PAGE_COPY_EXEC + +#define __S000 PAGE_NONE +#define __S001 PAGE_READONLY +#define __S010 PAGE_SHARED +#define __S011 PAGE_SHARED +#define __S100 PAGE_READONLY_EXEC +#define __S101 PAGE_READONLY_EXEC +#define __S110 PAGE_SHARED_EXEC +#define __S111 PAGE_SHARED_EXEC + +/* + * Define this if things work differently on an i386 and an i486: + * it will (on an i486) warn about kernel memory accesses that are + * done without a 'verify_area(VERIFY_WRITE,..)' + */ +#undef TEST_VERIFY_AREA + +/* The boot page tables (all created as a single array) */ +extern unsigned long pg0[]; + +#define pte_present(x) ((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE)) +#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0) + +#define pmd_none(x) (!pmd_val(x)) +#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT) +#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0) +#define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE) + + +#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ +static inline int pte_user(pte_t pte) { return (pte).pte_low & _PAGE_USER; } +static inline int pte_read(pte_t pte) { return (pte).pte_low & _PAGE_USER; } +static inline int pte_dirty(pte_t pte) { return (pte).pte_low & _PAGE_DIRTY; } +static inline int pte_young(pte_t pte) { return (pte).pte_low & _PAGE_ACCESSED; } +static inline int pte_write(pte_t pte) { return (pte).pte_low & _PAGE_RW; } + +/* + * The following only works if pte_present() is not true. + */ +static inline int pte_file(pte_t pte) { return (pte).pte_low & _PAGE_FILE; } + +static inline pte_t pte_rdprotect(pte_t pte) { (pte).pte_low &= ~_PAGE_USER; return pte; } +static inline pte_t pte_exprotect(pte_t pte) { (pte).pte_low &= ~_PAGE_USER; return pte; } +static inline pte_t pte_mkclean(pte_t pte) { (pte).pte_low &= ~_PAGE_DIRTY; return pte; } +static inline pte_t pte_mkold(pte_t pte) { (pte).pte_low &= ~_PAGE_ACCESSED; return pte; } +static inline pte_t pte_wrprotect(pte_t pte) { (pte).pte_low &= ~_PAGE_RW; return pte; } +static inline pte_t pte_mkread(pte_t pte) { (pte).pte_low |= _PAGE_USER; return pte; } +static inline pte_t pte_mkexec(pte_t pte) { (pte).pte_low |= _PAGE_USER; return pte; } +static inline pte_t pte_mkdirty(pte_t pte) { (pte).pte_low |= _PAGE_DIRTY; return pte; } +static inline pte_t pte_mkyoung(pte_t pte) { (pte).pte_low |= _PAGE_ACCESSED; return pte; } +static inline pte_t pte_mkwrite(pte_t pte) { (pte).pte_low |= _PAGE_RW; return pte; } + +#ifdef CONFIG_X86_PAE +# include +#else +# include +#endif + +static inline int ptep_test_and_clear_dirty(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) +{ + if (!pte_dirty(*ptep)) + return 0; + return test_and_clear_bit(_PAGE_BIT_DIRTY, &ptep->pte_low); +} + +static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) +{ + if (!pte_young(*ptep)) + return 0; + return test_and_clear_bit(_PAGE_BIT_ACCESSED, &ptep->pte_low); +} + +static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + clear_bit(_PAGE_BIT_RW, &ptep->pte_low); +} + +/* + * Macro to mark a page protection value as "uncacheable". On processors which do not support + * it, this is a no-op. + */ +#define pgprot_noncached(prot) ((boot_cpu_data.x86 > 3) \ + ? (__pgprot(pgprot_val(prot) | _PAGE_PCD | _PAGE_PWT)) : (prot)) + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + */ + +#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) +#define mk_pte_huge(entry) ((entry).pte_low |= _PAGE_PRESENT | _PAGE_PSE) + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + pte.pte_low &= _PAGE_CHG_MASK; + pte.pte_low |= pgprot_val(newprot); +#ifdef CONFIG_X86_PAE + /* + * Chop off the NX bit (if present), and add the NX portion of + * the newprot (if present): + */ + pte.pte_high &= ~(1 << (_PAGE_BIT_NX - 32)); + pte.pte_high |= (pgprot_val(newprot) >> 32) & \ + (__supported_pte_mask >> 32); +#endif + return pte; +} + +#define page_pte(page) page_pte_prot(page, __pgprot(0)) + +#define pmd_large(pmd) \ +((pmd_val(pmd) & (_PAGE_PSE|_PAGE_PRESENT)) == (_PAGE_PSE|_PAGE_PRESENT)) + +/* + * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD] + * + * this macro returns the index of the entry in the pgd page which would + * control the given virtual address + */ +#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) +#define pgd_index_k(addr) pgd_index(addr) + +/* + * pgd_offset() returns a (pgd_t *) + * pgd_index() is used get the offset into the pgd page's array of pgd_t's; + */ +#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address)) + +/* + * a shortcut which implies the use of the kernel's pgd, instead + * of a process's + */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +/* + * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD] + * + * this macro returns the index of the entry in the pmd page which would + * control the given virtual address + */ +#define pmd_index(address) \ + (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)) + +/* + * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE] + * + * this macro returns the index of the entry in the pte page which would + * control the given virtual address + */ +#define pte_index(address) \ + (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) +#define pte_offset_kernel(dir, address) \ + ((pte_t *) pmd_page_kernel(*(dir)) + pte_index(address)) + +/* + * Helper function that returns the kernel pagetable entry controlling + * the virtual address 'address'. NULL means no pagetable entry present. + * NOTE: the return type is pte_t but if the pmd is PSE then we return it + * as a pte too. + */ +extern pte_t *lookup_address(unsigned long address); + +/* + * Make a given kernel text page executable/non-executable. + * Returns the previous executability setting of that page (which + * is used to restore the previous state). Used by the SMP bootup code. + * NOTE: this is an __init function for security reasons. + */ +#ifdef CONFIG_X86_PAE + extern int set_kernel_exec(unsigned long vaddr, int enable); +#else + static inline int set_kernel_exec(unsigned long vaddr, int enable) { return 0;} +#endif + +extern void noexec_setup(const char *str); + +#if defined(CONFIG_HIGHPTE) +#define pte_offset_map(dir, address) \ + ((pte_t *)kmap_atomic(pmd_page(*(dir)),KM_PTE0) + pte_index(address)) +#define pte_offset_map_nested(dir, address) \ + ((pte_t *)kmap_atomic(pmd_page(*(dir)),KM_PTE1) + pte_index(address)) +#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0) +#define pte_unmap_nested(pte) kunmap_atomic(pte, KM_PTE1) +#else +#define pte_offset_map(dir, address) \ + ((pte_t *)page_address(pmd_page(*(dir))) + pte_index(address)) +#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address) +#define pte_unmap(pte) do { } while (0) +#define pte_unmap_nested(pte) do { } while (0) +#endif + +/* + * The i386 doesn't have any external MMU info: the kernel page + * tables contain all the necessary information. + * + * Also, we only update the dirty/accessed state if we set + * the dirty bit by hand in the kernel, since the hardware + * will do the accessed bit for us, and we don't want to + * race with other CPU's that might be updating the dirty + * bit at the same time. + */ +#define update_mmu_cache(vma,address,pte) do { } while (0) +#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS +#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \ + do { \ + if (__dirty) { \ + (__ptep)->pte_low = (__entry).pte_low; \ + flush_tlb_page(__vma, __address); \ + } \ + } while (0) + +#endif /* !__ASSEMBLY__ */ + +#ifndef CONFIG_DISCONTIGMEM +#define kern_addr_valid(addr) (1) +#endif /* !CONFIG_DISCONTIGMEM */ + +#define io_remap_page_range(vma, vaddr, paddr, size, prot) \ + remap_pfn_range(vma, vaddr, (paddr) >> PAGE_SHIFT, size, prot) + +#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +#define MK_IOSPACE_PFN(space, pfn) (pfn) +#define GET_IOSPACE(pfn) 0 +#define GET_PFN(pfn) (pfn) + +#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG +#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY +#define __HAVE_ARCH_PTEP_GET_AND_CLEAR +#define __HAVE_ARCH_PTEP_SET_WRPROTECT +#define __HAVE_ARCH_PTE_SAME +#include + +#endif /* _I386_PGTABLE_H */ diff --git a/include/asm-i386/poll.h b/include/asm-i386/poll.h new file mode 100644 index 00000000000..aecc80a15d3 --- /dev/null +++ b/include/asm-i386/poll.h @@ -0,0 +1,26 @@ +#ifndef __i386_POLL_H +#define __i386_POLL_H + +/* These are specified by iBCS2 */ +#define POLLIN 0x0001 +#define POLLPRI 0x0002 +#define POLLOUT 0x0004 +#define POLLERR 0x0008 +#define POLLHUP 0x0010 +#define POLLNVAL 0x0020 + +/* The rest seem to be more-or-less nonstandard. Check them! */ +#define POLLRDNORM 0x0040 +#define POLLRDBAND 0x0080 +#define POLLWRNORM 0x0100 +#define POLLWRBAND 0x0200 +#define POLLMSG 0x0400 +#define POLLREMOVE 0x1000 + +struct pollfd { + int fd; + short events; + short revents; +}; + +#endif diff --git a/include/asm-i386/posix_types.h b/include/asm-i386/posix_types.h new file mode 100644 index 00000000000..4e47ed059ad --- /dev/null +++ b/include/asm-i386/posix_types.h @@ -0,0 +1,82 @@ +#ifndef __ARCH_I386_POSIX_TYPES_H +#define __ARCH_I386_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { +#if defined(__KERNEL__) || defined(__USE_ALL) + int val[2]; +#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ + int __val[2]; +#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ +} __kernel_fsid_t; + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) + +#undef __FD_SET +#define __FD_SET(fd,fdsetp) \ + __asm__ __volatile__("btsl %1,%0": \ + "=m" (*(__kernel_fd_set *) (fdsetp)):"r" ((int) (fd))) + +#undef __FD_CLR +#define __FD_CLR(fd,fdsetp) \ + __asm__ __volatile__("btrl %1,%0": \ + "=m" (*(__kernel_fd_set *) (fdsetp)):"r" ((int) (fd))) + +#undef __FD_ISSET +#define __FD_ISSET(fd,fdsetp) (__extension__ ({ \ + unsigned char __result; \ + __asm__ __volatile__("btl %1,%2 ; setb %0" \ + :"=q" (__result) :"r" ((int) (fd)), \ + "m" (*(__kernel_fd_set *) (fdsetp))); \ + __result; })) + +#undef __FD_ZERO +#define __FD_ZERO(fdsetp) \ +do { \ + int __d0, __d1; \ + __asm__ __volatile__("cld ; rep ; stosl" \ + :"=m" (*(__kernel_fd_set *) (fdsetp)), \ + "=&c" (__d0), "=&D" (__d1) \ + :"a" (0), "1" (__FDSET_LONGS), \ + "2" ((__kernel_fd_set *) (fdsetp)) : "memory"); \ +} while (0) + +#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ + +#endif diff --git a/include/asm-i386/processor.h b/include/asm-i386/processor.h new file mode 100644 index 00000000000..be258b0e5a5 --- /dev/null +++ b/include/asm-i386/processor.h @@ -0,0 +1,682 @@ +/* + * include/asm-i386/processor.h + * + * Copyright (C) 1994 Linus Torvalds + */ + +#ifndef __ASM_I386_PROCESSOR_H +#define __ASM_I386_PROCESSOR_H + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* flag for disabling the tsc */ +extern int tsc_disable; + +struct desc_struct { + unsigned long a,b; +}; + +#define desc_empty(desc) \ + (!((desc)->a + (desc)->b)) + +#define desc_equal(desc1, desc2) \ + (((desc1)->a == (desc2)->a) && ((desc1)->b == (desc2)->b)) +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ void *pc; __asm__("movl $1f,%0\n1:":"=g" (pc)); pc; }) + +/* + * CPU type and hardware bug flags. Kept separately for each CPU. + * Members of this structure are referenced in head.S, so think twice + * before touching them. [mj] + */ + +struct cpuinfo_x86 { + __u8 x86; /* CPU family */ + __u8 x86_vendor; /* CPU vendor */ + __u8 x86_model; + __u8 x86_mask; + char wp_works_ok; /* It doesn't on 386's */ + char hlt_works_ok; /* Problems on some 486Dx4's and old 386's */ + char hard_math; + char rfu; + int cpuid_level; /* Maximum supported CPUID level, -1=no CPUID */ + unsigned long x86_capability[NCAPINTS]; + char x86_vendor_id[16]; + char x86_model_id[64]; + int x86_cache_size; /* in KB - valid for CPUS which support this + call */ + int x86_cache_alignment; /* In bytes */ + int fdiv_bug; + int f00f_bug; + int coma_bug; + unsigned long loops_per_jiffy; + unsigned char x86_num_cores; +} __attribute__((__aligned__(SMP_CACHE_BYTES))); + +#define X86_VENDOR_INTEL 0 +#define X86_VENDOR_CYRIX 1 +#define X86_VENDOR_AMD 2 +#define X86_VENDOR_UMC 3 +#define X86_VENDOR_NEXGEN 4 +#define X86_VENDOR_CENTAUR 5 +#define X86_VENDOR_RISE 6 +#define X86_VENDOR_TRANSMETA 7 +#define X86_VENDOR_NSC 8 +#define X86_VENDOR_NUM 9 +#define X86_VENDOR_UNKNOWN 0xff + +/* + * capabilities of CPUs + */ + +extern struct cpuinfo_x86 boot_cpu_data; +extern struct cpuinfo_x86 new_cpu_data; +extern struct tss_struct doublefault_tss; +DECLARE_PER_CPU(struct tss_struct, init_tss); + +#ifdef CONFIG_SMP +extern struct cpuinfo_x86 cpu_data[]; +#define current_cpu_data cpu_data[smp_processor_id()] +#else +#define cpu_data (&boot_cpu_data) +#define current_cpu_data boot_cpu_data +#endif + +extern int phys_proc_id[NR_CPUS]; +extern char ignore_fpu_irq; + +extern void identify_cpu(struct cpuinfo_x86 *); +extern void print_cpu_info(struct cpuinfo_x86 *); +extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c); + +#ifdef CONFIG_X86_HT +extern void detect_ht(struct cpuinfo_x86 *c); +#else +static inline void detect_ht(struct cpuinfo_x86 *c) {} +#endif + +/* + * EFLAGS bits + */ +#define X86_EFLAGS_CF 0x00000001 /* Carry Flag */ +#define X86_EFLAGS_PF 0x00000004 /* Parity Flag */ +#define X86_EFLAGS_AF 0x00000010 /* Auxillary carry Flag */ +#define X86_EFLAGS_ZF 0x00000040 /* Zero Flag */ +#define X86_EFLAGS_SF 0x00000080 /* Sign Flag */ +#define X86_EFLAGS_TF 0x00000100 /* Trap Flag */ +#define X86_EFLAGS_IF 0x00000200 /* Interrupt Flag */ +#define X86_EFLAGS_DF 0x00000400 /* Direction Flag */ +#define X86_EFLAGS_OF 0x00000800 /* Overflow Flag */ +#define X86_EFLAGS_IOPL 0x00003000 /* IOPL mask */ +#define X86_EFLAGS_NT 0x00004000 /* Nested Task */ +#define X86_EFLAGS_RF 0x00010000 /* Resume Flag */ +#define X86_EFLAGS_VM 0x00020000 /* Virtual Mode */ +#define X86_EFLAGS_AC 0x00040000 /* Alignment Check */ +#define X86_EFLAGS_VIF 0x00080000 /* Virtual Interrupt Flag */ +#define X86_EFLAGS_VIP 0x00100000 /* Virtual Interrupt Pending */ +#define X86_EFLAGS_ID 0x00200000 /* CPUID detection flag */ + +/* + * Generic CPUID function + * clear %ecx since some cpus (Cyrix MII) do not set or clear %ecx + * resulting in stale register contents being returned. + */ +static inline void cpuid(unsigned int op, unsigned int *eax, unsigned int *ebx, unsigned int *ecx, unsigned int *edx) +{ + __asm__("cpuid" + : "=a" (*eax), + "=b" (*ebx), + "=c" (*ecx), + "=d" (*edx) + : "0" (op), "c"(0)); +} + +/* Some CPUID calls want 'count' to be placed in ecx */ +static inline void cpuid_count(int op, int count, int *eax, int *ebx, int *ecx, + int *edx) +{ + __asm__("cpuid" + : "=a" (*eax), + "=b" (*ebx), + "=c" (*ecx), + "=d" (*edx) + : "0" (op), "c" (count)); +} + +/* + * CPUID functions returning a single datum + */ +static inline unsigned int cpuid_eax(unsigned int op) +{ + unsigned int eax; + + __asm__("cpuid" + : "=a" (eax) + : "0" (op) + : "bx", "cx", "dx"); + return eax; +} +static inline unsigned int cpuid_ebx(unsigned int op) +{ + unsigned int eax, ebx; + + __asm__("cpuid" + : "=a" (eax), "=b" (ebx) + : "0" (op) + : "cx", "dx" ); + return ebx; +} +static inline unsigned int cpuid_ecx(unsigned int op) +{ + unsigned int eax, ecx; + + __asm__("cpuid" + : "=a" (eax), "=c" (ecx) + : "0" (op) + : "bx", "dx" ); + return ecx; +} +static inline unsigned int cpuid_edx(unsigned int op) +{ + unsigned int eax, edx; + + __asm__("cpuid" + : "=a" (eax), "=d" (edx) + : "0" (op) + : "bx", "cx"); + return edx; +} + +#define load_cr3(pgdir) \ + asm volatile("movl %0,%%cr3": :"r" (__pa(pgdir))) + + +/* + * Intel CPU features in CR4 + */ +#define X86_CR4_VME 0x0001 /* enable vm86 extensions */ +#define X86_CR4_PVI 0x0002 /* virtual interrupts flag enable */ +#define X86_CR4_TSD 0x0004 /* disable time stamp at ipl 3 */ +#define X86_CR4_DE 0x0008 /* enable debugging extensions */ +#define X86_CR4_PSE 0x0010 /* enable page size extensions */ +#define X86_CR4_PAE 0x0020 /* enable physical address extensions */ +#define X86_CR4_MCE 0x0040 /* Machine check enable */ +#define X86_CR4_PGE 0x0080 /* enable global pages */ +#define X86_CR4_PCE 0x0100 /* enable performance counters at ipl 3 */ +#define X86_CR4_OSFXSR 0x0200 /* enable fast FPU save and restore */ +#define X86_CR4_OSXMMEXCPT 0x0400 /* enable unmasked SSE exceptions */ + +/* + * Save the cr4 feature set we're using (ie + * Pentium 4MB enable and PPro Global page + * enable), so that any CPU's that boot up + * after us can get the correct flags. + */ +extern unsigned long mmu_cr4_features; + +static inline void set_in_cr4 (unsigned long mask) +{ + mmu_cr4_features |= mask; + __asm__("movl %%cr4,%%eax\n\t" + "orl %0,%%eax\n\t" + "movl %%eax,%%cr4\n" + : : "irg" (mask) + :"ax"); +} + +static inline void clear_in_cr4 (unsigned long mask) +{ + mmu_cr4_features &= ~mask; + __asm__("movl %%cr4,%%eax\n\t" + "andl %0,%%eax\n\t" + "movl %%eax,%%cr4\n" + : : "irg" (~mask) + :"ax"); +} + +/* + * NSC/Cyrix CPU configuration register indexes + */ + +#define CX86_PCR0 0x20 +#define CX86_GCR 0xb8 +#define CX86_CCR0 0xc0 +#define CX86_CCR1 0xc1 +#define CX86_CCR2 0xc2 +#define CX86_CCR3 0xc3 +#define CX86_CCR4 0xe8 +#define CX86_CCR5 0xe9 +#define CX86_CCR6 0xea +#define CX86_CCR7 0xeb +#define CX86_PCR1 0xf0 +#define CX86_DIR0 0xfe +#define CX86_DIR1 0xff +#define CX86_ARR_BASE 0xc4 +#define CX86_RCR_BASE 0xdc + +/* + * NSC/Cyrix CPU indexed register access macros + */ + +#define getCx86(reg) ({ outb((reg), 0x22); inb(0x23); }) + +#define setCx86(reg, data) do { \ + outb((reg), 0x22); \ + outb((data), 0x23); \ +} while (0) + +static inline void __monitor(const void *eax, unsigned long ecx, + unsigned long edx) +{ + /* "monitor %eax,%ecx,%edx;" */ + asm volatile( + ".byte 0x0f,0x01,0xc8;" + : :"a" (eax), "c" (ecx), "d"(edx)); +} + +static inline void __mwait(unsigned long eax, unsigned long ecx) +{ + /* "mwait %eax,%ecx;" */ + asm volatile( + ".byte 0x0f,0x01,0xc9;" + : :"a" (eax), "c" (ecx)); +} + +/* from system description table in BIOS. Mostly for MCA use, but +others may find it useful. */ +extern unsigned int machine_id; +extern unsigned int machine_submodel_id; +extern unsigned int BIOS_revision; +extern unsigned int mca_pentium_flag; + +/* Boot loader type from the setup header */ +extern int bootloader_type; + +/* + * User space process size: 3GB (default). + */ +#define TASK_SIZE (PAGE_OFFSET) + +/* This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE (PAGE_ALIGN(TASK_SIZE / 3)) + +#define HAVE_ARCH_PICK_MMAP_LAYOUT + +/* + * Size of io_bitmap. + */ +#define IO_BITMAP_BITS 65536 +#define IO_BITMAP_BYTES (IO_BITMAP_BITS/8) +#define IO_BITMAP_LONGS (IO_BITMAP_BYTES/sizeof(long)) +#define IO_BITMAP_OFFSET offsetof(struct tss_struct,io_bitmap) +#define INVALID_IO_BITMAP_OFFSET 0x8000 +#define INVALID_IO_BITMAP_OFFSET_LAZY 0x9000 + +struct i387_fsave_struct { + long cwd; + long swd; + long twd; + long fip; + long fcs; + long foo; + long fos; + long st_space[20]; /* 8*10 bytes for each FP-reg = 80 bytes */ + long status; /* software status information */ +}; + +struct i387_fxsave_struct { + unsigned short cwd; + unsigned short swd; + unsigned short twd; + unsigned short fop; + long fip; + long fcs; + long foo; + long fos; + long mxcsr; + long mxcsr_mask; + long st_space[32]; /* 8*16 bytes for each FP-reg = 128 bytes */ + long xmm_space[32]; /* 8*16 bytes for each XMM-reg = 128 bytes */ + long padding[56]; +} __attribute__ ((aligned (16))); + +struct i387_soft_struct { + long cwd; + long swd; + long twd; + long fip; + long fcs; + long foo; + long fos; + long st_space[20]; /* 8*10 bytes for each FP-reg = 80 bytes */ + unsigned char ftop, changed, lookahead, no_update, rm, alimit; + struct info *info; + unsigned long entry_eip; +}; + +union i387_union { + struct i387_fsave_struct fsave; + struct i387_fxsave_struct fxsave; + struct i387_soft_struct soft; +}; + +typedef struct { + unsigned long seg; +} mm_segment_t; + +struct thread_struct; + +struct tss_struct { + unsigned short back_link,__blh; + unsigned long esp0; + unsigned short ss0,__ss0h; + unsigned long esp1; + unsigned short ss1,__ss1h; /* ss1 is used to cache MSR_IA32_SYSENTER_CS */ + unsigned long esp2; + unsigned short ss2,__ss2h; + unsigned long __cr3; + unsigned long eip; + unsigned long eflags; + unsigned long eax,ecx,edx,ebx; + unsigned long esp; + unsigned long ebp; + unsigned long esi; + unsigned long edi; + unsigned short es, __esh; + unsigned short cs, __csh; + unsigned short ss, __ssh; + unsigned short ds, __dsh; + unsigned short fs, __fsh; + unsigned short gs, __gsh; + unsigned short ldt, __ldth; + unsigned short trace, io_bitmap_base; + /* + * The extra 1 is there because the CPU will access an + * additional byte beyond the end of the IO permission + * bitmap. The extra byte must be all 1 bits, and must + * be within the limit. + */ + unsigned long io_bitmap[IO_BITMAP_LONGS + 1]; + /* + * Cache the current maximum and the last task that used the bitmap: + */ + unsigned long io_bitmap_max; + struct thread_struct *io_bitmap_owner; + /* + * pads the TSS to be cacheline-aligned (size is 0x100) + */ + unsigned long __cacheline_filler[35]; + /* + * .. and then another 0x100 bytes for emergency kernel stack + */ + unsigned long stack[64]; +} __attribute__((packed)); + +#define ARCH_MIN_TASKALIGN 16 + +struct thread_struct { +/* cached TLS descriptors. */ + struct desc_struct tls_array[GDT_ENTRY_TLS_ENTRIES]; + unsigned long esp0; + unsigned long sysenter_cs; + unsigned long eip; + unsigned long esp; + unsigned long fs; + unsigned long gs; +/* Hardware debugging registers */ + unsigned long debugreg[8]; /* %%db0-7 debug registers */ +/* fault info */ + unsigned long cr2, trap_no, error_code; +/* floating point info */ + union i387_union i387; +/* virtual 86 mode info */ + struct vm86_struct __user * vm86_info; + unsigned long screen_bitmap; + unsigned long v86flags, v86mask, saved_esp0; + unsigned int saved_fs, saved_gs; +/* IO permissions */ + unsigned long *io_bitmap_ptr; +/* max allowed port in the bitmap, in bytes: */ + unsigned long io_bitmap_max; +}; + +#define INIT_THREAD { \ + .vm86_info = NULL, \ + .sysenter_cs = __KERNEL_CS, \ + .io_bitmap_ptr = NULL, \ +} + +/* + * Note that the .io_bitmap member must be extra-big. This is because + * the CPU will access an additional byte beyond the end of the IO + * permission bitmap. The extra byte must be all 1 bits, and must + * be within the limit. + */ +#define INIT_TSS { \ + .esp0 = sizeof(init_stack) + (long)&init_stack, \ + .ss0 = __KERNEL_DS, \ + .ss1 = __KERNEL_CS, \ + .ldt = GDT_ENTRY_LDT, \ + .io_bitmap_base = INVALID_IO_BITMAP_OFFSET, \ + .io_bitmap = { [ 0 ... IO_BITMAP_LONGS] = ~0 }, \ +} + +static inline void load_esp0(struct tss_struct *tss, struct thread_struct *thread) +{ + tss->esp0 = thread->esp0; + /* This can only happen when SEP is enabled, no need to test "SEP"arately */ + if (unlikely(tss->ss1 != thread->sysenter_cs)) { + tss->ss1 = thread->sysenter_cs; + wrmsr(MSR_IA32_SYSENTER_CS, thread->sysenter_cs, 0); + } +} + +#define start_thread(regs, new_eip, new_esp) do { \ + __asm__("movl %0,%%fs ; movl %0,%%gs": :"r" (0)); \ + set_fs(USER_DS); \ + regs->xds = __USER_DS; \ + regs->xes = __USER_DS; \ + regs->xss = __USER_DS; \ + regs->xcs = __USER_CS; \ + regs->eip = new_eip; \ + regs->esp = new_esp; \ +} while (0) + +/* Forward declaration, a strange C thing */ +struct task_struct; +struct mm_struct; + +/* Free all resources held by a thread. */ +extern void release_thread(struct task_struct *); + +/* Prepare to copy thread state - unlazy all lazy status */ +extern void prepare_to_copy(struct task_struct *tsk); + +/* + * create a kernel thread without removing it from tasklists + */ +extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + +extern unsigned long thread_saved_pc(struct task_struct *tsk); +void show_trace(struct task_struct *task, unsigned long *stack); + +unsigned long get_wchan(struct task_struct *p); + +#define THREAD_SIZE_LONGS (THREAD_SIZE/sizeof(unsigned long)) +#define KSTK_TOP(info) \ +({ \ + unsigned long *__ptr = (unsigned long *)(info); \ + (unsigned long)(&__ptr[THREAD_SIZE_LONGS]); \ +}) + +#define task_pt_regs(task) \ +({ \ + struct pt_regs *__regs__; \ + __regs__ = (struct pt_regs *)KSTK_TOP((task)->thread_info); \ + __regs__ - 1; \ +}) + +#define KSTK_EIP(task) (task_pt_regs(task)->eip) +#define KSTK_ESP(task) (task_pt_regs(task)->esp) + + +struct microcode_header { + unsigned int hdrver; + unsigned int rev; + unsigned int date; + unsigned int sig; + unsigned int cksum; + unsigned int ldrver; + unsigned int pf; + unsigned int datasize; + unsigned int totalsize; + unsigned int reserved[3]; +}; + +struct microcode { + struct microcode_header hdr; + unsigned int bits[0]; +}; + +typedef struct microcode microcode_t; +typedef struct microcode_header microcode_header_t; + +/* microcode format is extended from prescott processors */ +struct extended_signature { + unsigned int sig; + unsigned int pf; + unsigned int cksum; +}; + +struct extended_sigtable { + unsigned int count; + unsigned int cksum; + unsigned int reserved[3]; + struct extended_signature sigs[0]; +}; +/* '6' because it used to be for P6 only (but now covers Pentium 4 as well) */ +#define MICROCODE_IOCFREE _IO('6',0) + +/* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */ +static inline void rep_nop(void) +{ + __asm__ __volatile__("rep;nop": : :"memory"); +} + +#define cpu_relax() rep_nop() + +/* generic versions from gas */ +#define GENERIC_NOP1 ".byte 0x90\n" +#define GENERIC_NOP2 ".byte 0x89,0xf6\n" +#define GENERIC_NOP3 ".byte 0x8d,0x76,0x00\n" +#define GENERIC_NOP4 ".byte 0x8d,0x74,0x26,0x00\n" +#define GENERIC_NOP5 GENERIC_NOP1 GENERIC_NOP4 +#define GENERIC_NOP6 ".byte 0x8d,0xb6,0x00,0x00,0x00,0x00\n" +#define GENERIC_NOP7 ".byte 0x8d,0xb4,0x26,0x00,0x00,0x00,0x00\n" +#define GENERIC_NOP8 GENERIC_NOP1 GENERIC_NOP7 + +/* Opteron nops */ +#define K8_NOP1 GENERIC_NOP1 +#define K8_NOP2 ".byte 0x66,0x90\n" +#define K8_NOP3 ".byte 0x66,0x66,0x90\n" +#define K8_NOP4 ".byte 0x66,0x66,0x66,0x90\n" +#define K8_NOP5 K8_NOP3 K8_NOP2 +#define K8_NOP6 K8_NOP3 K8_NOP3 +#define K8_NOP7 K8_NOP4 K8_NOP3 +#define K8_NOP8 K8_NOP4 K8_NOP4 + +/* K7 nops */ +/* uses eax dependencies (arbitary choice) */ +#define K7_NOP1 GENERIC_NOP1 +#define K7_NOP2 ".byte 0x8b,0xc0\n" +#define K7_NOP3 ".byte 0x8d,0x04,0x20\n" +#define K7_NOP4 ".byte 0x8d,0x44,0x20,0x00\n" +#define K7_NOP5 K7_NOP4 ASM_NOP1 +#define K7_NOP6 ".byte 0x8d,0x80,0,0,0,0\n" +#define K7_NOP7 ".byte 0x8D,0x04,0x05,0,0,0,0\n" +#define K7_NOP8 K7_NOP7 ASM_NOP1 + +#ifdef CONFIG_MK8 +#define ASM_NOP1 K8_NOP1 +#define ASM_NOP2 K8_NOP2 +#define ASM_NOP3 K8_NOP3 +#define ASM_NOP4 K8_NOP4 +#define ASM_NOP5 K8_NOP5 +#define ASM_NOP6 K8_NOP6 +#define ASM_NOP7 K8_NOP7 +#define ASM_NOP8 K8_NOP8 +#elif defined(CONFIG_MK7) +#define ASM_NOP1 K7_NOP1 +#define ASM_NOP2 K7_NOP2 +#define ASM_NOP3 K7_NOP3 +#define ASM_NOP4 K7_NOP4 +#define ASM_NOP5 K7_NOP5 +#define ASM_NOP6 K7_NOP6 +#define ASM_NOP7 K7_NOP7 +#define ASM_NOP8 K7_NOP8 +#else +#define ASM_NOP1 GENERIC_NOP1 +#define ASM_NOP2 GENERIC_NOP2 +#define ASM_NOP3 GENERIC_NOP3 +#define ASM_NOP4 GENERIC_NOP4 +#define ASM_NOP5 GENERIC_NOP5 +#define ASM_NOP6 GENERIC_NOP6 +#define ASM_NOP7 GENERIC_NOP7 +#define ASM_NOP8 GENERIC_NOP8 +#endif + +#define ASM_NOP_MAX 8 + +/* Prefetch instructions for Pentium III and AMD Athlon */ +/* It's not worth to care about 3dnow! prefetches for the K6 + because they are microcoded there and very slow. + However we don't do prefetches for pre XP Athlons currently + That should be fixed. */ +#define ARCH_HAS_PREFETCH +extern inline void prefetch(const void *x) +{ + alternative_input(ASM_NOP4, + "prefetchnta (%1)", + X86_FEATURE_XMM, + "r" (x)); +} + +#define ARCH_HAS_PREFETCH +#define ARCH_HAS_PREFETCHW +#define ARCH_HAS_SPINLOCK_PREFETCH + +/* 3dnow! prefetch to get an exclusive cache line. Useful for + spinlocks to avoid one state transition in the cache coherency protocol. */ +extern inline void prefetchw(const void *x) +{ + alternative_input(ASM_NOP4, + "prefetchw (%1)", + X86_FEATURE_3DNOW, + "r" (x)); +} +#define spin_lock_prefetch(x) prefetchw(x) + +extern void select_idle_routine(const struct cpuinfo_x86 *c); + +#define cache_line_size() (boot_cpu_data.x86_cache_alignment) + +extern unsigned long boot_option_idle_override; + +#endif /* __ASM_I386_PROCESSOR_H */ diff --git a/include/asm-i386/ptrace.h b/include/asm-i386/ptrace.h new file mode 100644 index 00000000000..8618914b352 --- /dev/null +++ b/include/asm-i386/ptrace.h @@ -0,0 +1,69 @@ +#ifndef _I386_PTRACE_H +#define _I386_PTRACE_H + +#define EBX 0 +#define ECX 1 +#define EDX 2 +#define ESI 3 +#define EDI 4 +#define EBP 5 +#define EAX 6 +#define DS 7 +#define ES 8 +#define FS 9 +#define GS 10 +#define ORIG_EAX 11 +#define EIP 12 +#define CS 13 +#define EFL 14 +#define UESP 15 +#define SS 16 +#define FRAME_SIZE 17 + +/* this struct defines the way the registers are stored on the + stack during a system call. */ + +struct pt_regs { + long ebx; + long ecx; + long edx; + long esi; + long edi; + long ebp; + long eax; + int xds; + int xes; + long orig_eax; + long eip; + int xcs; + long eflags; + long esp; + int xss; +}; + +/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETFPREGS 14 +#define PTRACE_SETFPREGS 15 +#define PTRACE_GETFPXREGS 18 +#define PTRACE_SETFPXREGS 19 + +#define PTRACE_OLDSETOPTIONS 21 + +#define PTRACE_GET_THREAD_AREA 25 +#define PTRACE_SET_THREAD_AREA 26 + +#ifdef __KERNEL__ +struct task_struct; +extern void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code); +#define user_mode(regs) ((VM_MASK & (regs)->eflags) || (3 & (regs)->xcs)) +#define instruction_pointer(regs) ((regs)->eip) +#if defined(CONFIG_SMP) && defined(CONFIG_FRAME_POINTER) +extern unsigned long profile_pc(struct pt_regs *regs); +#else +#define profile_pc(regs) instruction_pointer(regs) +#endif +#endif + +#endif diff --git a/include/asm-i386/resource.h b/include/asm-i386/resource.h new file mode 100644 index 00000000000..6c1ea37c771 --- /dev/null +++ b/include/asm-i386/resource.h @@ -0,0 +1,6 @@ +#ifndef _I386_RESOURCE_H +#define _I386_RESOURCE_H + +#include + +#endif diff --git a/include/asm-i386/rtc.h b/include/asm-i386/rtc.h new file mode 100644 index 00000000000..ffd02109a0e --- /dev/null +++ b/include/asm-i386/rtc.h @@ -0,0 +1,10 @@ +#ifndef _I386_RTC_H +#define _I386_RTC_H + +/* + * x86 uses the default access methods for the RTC. + */ + +#include + +#endif diff --git a/include/asm-i386/rwlock.h b/include/asm-i386/rwlock.h new file mode 100644 index 00000000000..b57cc7afdf7 --- /dev/null +++ b/include/asm-i386/rwlock.h @@ -0,0 +1,71 @@ +/* include/asm-i386/rwlock.h + * + * Helpers used by both rw spinlocks and rw semaphores. + * + * Based in part on code from semaphore.h and + * spinlock.h Copyright 1996 Linus Torvalds. + * + * Copyright 1999 Red Hat, Inc. + * + * Written by Benjamin LaHaise. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_I386_RWLOCK_H +#define _ASM_I386_RWLOCK_H + +#define RW_LOCK_BIAS 0x01000000 +#define RW_LOCK_BIAS_STR "0x01000000" + +#define __build_read_lock_ptr(rw, helper) \ + asm volatile(LOCK "subl $1,(%0)\n\t" \ + "jns 1f\n" \ + "call " helper "\n\t" \ + "1:\n" \ + ::"a" (rw) : "memory") + +#define __build_read_lock_const(rw, helper) \ + asm volatile(LOCK "subl $1,%0\n\t" \ + "jns 1f\n" \ + "pushl %%eax\n\t" \ + "leal %0,%%eax\n\t" \ + "call " helper "\n\t" \ + "popl %%eax\n\t" \ + "1:\n" \ + :"=m" (*(volatile int *)rw) : : "memory") + +#define __build_read_lock(rw, helper) do { \ + if (__builtin_constant_p(rw)) \ + __build_read_lock_const(rw, helper); \ + else \ + __build_read_lock_ptr(rw, helper); \ + } while (0) + +#define __build_write_lock_ptr(rw, helper) \ + asm volatile(LOCK "subl $" RW_LOCK_BIAS_STR ",(%0)\n\t" \ + "jz 1f\n" \ + "call " helper "\n\t" \ + "1:\n" \ + ::"a" (rw) : "memory") + +#define __build_write_lock_const(rw, helper) \ + asm volatile(LOCK "subl $" RW_LOCK_BIAS_STR ",%0\n\t" \ + "jz 1f\n" \ + "pushl %%eax\n\t" \ + "leal %0,%%eax\n\t" \ + "call " helper "\n\t" \ + "popl %%eax\n\t" \ + "1:\n" \ + :"=m" (*(volatile int *)rw) : : "memory") + +#define __build_write_lock(rw, helper) do { \ + if (__builtin_constant_p(rw)) \ + __build_write_lock_const(rw, helper); \ + else \ + __build_write_lock_ptr(rw, helper); \ + } while (0) + +#endif diff --git a/include/asm-i386/rwsem.h b/include/asm-i386/rwsem.h new file mode 100644 index 00000000000..7625a675852 --- /dev/null +++ b/include/asm-i386/rwsem.h @@ -0,0 +1,288 @@ +/* rwsem.h: R/W semaphores implemented using XADD/CMPXCHG for i486+ + * + * Written by David Howells (dhowells@redhat.com). + * + * Derived from asm-i386/semaphore.h + * + * + * The MSW of the count is the negated number of active writers and waiting + * lockers, and the LSW is the total number of active locks + * + * The lock count is initialized to 0 (no active and no waiting lockers). + * + * When a writer subtracts WRITE_BIAS, it'll get 0xffff0001 for the case of an + * uncontended lock. This can be determined because XADD returns the old value. + * Readers increment by 1 and see a positive value when uncontended, negative + * if there are writers (and maybe) readers waiting (in which case it goes to + * sleep). + * + * The value of WAITING_BIAS supports up to 32766 waiting processes. This can + * be extended to 65534 by manually checking the whole MSW rather than relying + * on the S flag. + * + * The value of ACTIVE_BIAS supports up to 65535 active processes. + * + * This should be totally fair - if anything is waiting, a process that wants a + * lock will go to the back of the queue. When the currently active lock is + * released, if there's a writer at the front of the queue, then that and only + * that will be woken up; if there's a bunch of consequtive readers at the + * front, then they'll all be woken up, but no other readers will be. + */ + +#ifndef _I386_RWSEM_H +#define _I386_RWSEM_H + +#ifndef _LINUX_RWSEM_H +#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead" +#endif + +#ifdef __KERNEL__ + +#include +#include + +struct rwsem_waiter; + +extern struct rw_semaphore *FASTCALL(rwsem_down_read_failed(struct rw_semaphore *sem)); +extern struct rw_semaphore *FASTCALL(rwsem_down_write_failed(struct rw_semaphore *sem)); +extern struct rw_semaphore *FASTCALL(rwsem_wake(struct rw_semaphore *)); +extern struct rw_semaphore *FASTCALL(rwsem_downgrade_wake(struct rw_semaphore *sem)); + +/* + * the semaphore definition + */ +struct rw_semaphore { + signed long count; +#define RWSEM_UNLOCKED_VALUE 0x00000000 +#define RWSEM_ACTIVE_BIAS 0x00000001 +#define RWSEM_ACTIVE_MASK 0x0000ffff +#define RWSEM_WAITING_BIAS (-0x00010000) +#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS +#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) + spinlock_t wait_lock; + struct list_head wait_list; +#if RWSEM_DEBUG + int debug; +#endif +}; + +/* + * initialisation + */ +#if RWSEM_DEBUG +#define __RWSEM_DEBUG_INIT , 0 +#else +#define __RWSEM_DEBUG_INIT /* */ +#endif + +#define __RWSEM_INITIALIZER(name) \ +{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) \ + __RWSEM_DEBUG_INIT } + +#define DECLARE_RWSEM(name) \ + struct rw_semaphore name = __RWSEM_INITIALIZER(name) + +static inline void init_rwsem(struct rw_semaphore *sem) +{ + sem->count = RWSEM_UNLOCKED_VALUE; + spin_lock_init(&sem->wait_lock); + INIT_LIST_HEAD(&sem->wait_list); +#if RWSEM_DEBUG + sem->debug = 0; +#endif +} + +/* + * lock for reading + */ +static inline void __down_read(struct rw_semaphore *sem) +{ + __asm__ __volatile__( + "# beginning down_read\n\t" +LOCK_PREFIX " incl (%%eax)\n\t" /* adds 0x00000001, returns the old value */ + " js 2f\n\t" /* jump if we weren't granted the lock */ + "1:\n\t" + LOCK_SECTION_START("") + "2:\n\t" + " pushl %%ecx\n\t" + " pushl %%edx\n\t" + " call rwsem_down_read_failed\n\t" + " popl %%edx\n\t" + " popl %%ecx\n\t" + " jmp 1b\n" + LOCK_SECTION_END + "# ending down_read\n\t" + : "=m"(sem->count) + : "a"(sem), "m"(sem->count) + : "memory", "cc"); +} + +/* + * trylock for reading -- returns 1 if successful, 0 if contention + */ +static inline int __down_read_trylock(struct rw_semaphore *sem) +{ + __s32 result, tmp; + __asm__ __volatile__( + "# beginning __down_read_trylock\n\t" + " movl %0,%1\n\t" + "1:\n\t" + " movl %1,%2\n\t" + " addl %3,%2\n\t" + " jle 2f\n\t" +LOCK_PREFIX " cmpxchgl %2,%0\n\t" + " jnz 1b\n\t" + "2:\n\t" + "# ending __down_read_trylock\n\t" + : "+m"(sem->count), "=&a"(result), "=&r"(tmp) + : "i"(RWSEM_ACTIVE_READ_BIAS) + : "memory", "cc"); + return result>=0 ? 1 : 0; +} + +/* + * lock for writing + */ +static inline void __down_write(struct rw_semaphore *sem) +{ + int tmp; + + tmp = RWSEM_ACTIVE_WRITE_BIAS; + __asm__ __volatile__( + "# beginning down_write\n\t" +LOCK_PREFIX " xadd %%edx,(%%eax)\n\t" /* subtract 0x0000ffff, returns the old value */ + " testl %%edx,%%edx\n\t" /* was the count 0 before? */ + " jnz 2f\n\t" /* jump if we weren't granted the lock */ + "1:\n\t" + LOCK_SECTION_START("") + "2:\n\t" + " pushl %%ecx\n\t" + " call rwsem_down_write_failed\n\t" + " popl %%ecx\n\t" + " jmp 1b\n" + LOCK_SECTION_END + "# ending down_write" + : "=m"(sem->count), "=d"(tmp) + : "a"(sem), "1"(tmp), "m"(sem->count) + : "memory", "cc"); +} + +/* + * trylock for writing -- returns 1 if successful, 0 if contention + */ +static inline int __down_write_trylock(struct rw_semaphore *sem) +{ + signed long ret = cmpxchg(&sem->count, + RWSEM_UNLOCKED_VALUE, + RWSEM_ACTIVE_WRITE_BIAS); + if (ret == RWSEM_UNLOCKED_VALUE) + return 1; + return 0; +} + +/* + * unlock after reading + */ +static inline void __up_read(struct rw_semaphore *sem) +{ + __s32 tmp = -RWSEM_ACTIVE_READ_BIAS; + __asm__ __volatile__( + "# beginning __up_read\n\t" +LOCK_PREFIX " xadd %%edx,(%%eax)\n\t" /* subtracts 1, returns the old value */ + " js 2f\n\t" /* jump if the lock is being waited upon */ + "1:\n\t" + LOCK_SECTION_START("") + "2:\n\t" + " decw %%dx\n\t" /* do nothing if still outstanding active readers */ + " jnz 1b\n\t" + " pushl %%ecx\n\t" + " call rwsem_wake\n\t" + " popl %%ecx\n\t" + " jmp 1b\n" + LOCK_SECTION_END + "# ending __up_read\n" + : "=m"(sem->count), "=d"(tmp) + : "a"(sem), "1"(tmp), "m"(sem->count) + : "memory", "cc"); +} + +/* + * unlock after writing + */ +static inline void __up_write(struct rw_semaphore *sem) +{ + __asm__ __volatile__( + "# beginning __up_write\n\t" + " movl %2,%%edx\n\t" +LOCK_PREFIX " xaddl %%edx,(%%eax)\n\t" /* tries to transition 0xffff0001 -> 0x00000000 */ + " jnz 2f\n\t" /* jump if the lock is being waited upon */ + "1:\n\t" + LOCK_SECTION_START("") + "2:\n\t" + " decw %%dx\n\t" /* did the active count reduce to 0? */ + " jnz 1b\n\t" /* jump back if not */ + " pushl %%ecx\n\t" + " call rwsem_wake\n\t" + " popl %%ecx\n\t" + " jmp 1b\n" + LOCK_SECTION_END + "# ending __up_write\n" + : "=m"(sem->count) + : "a"(sem), "i"(-RWSEM_ACTIVE_WRITE_BIAS), "m"(sem->count) + : "memory", "cc", "edx"); +} + +/* + * downgrade write lock to read lock + */ +static inline void __downgrade_write(struct rw_semaphore *sem) +{ + __asm__ __volatile__( + "# beginning __downgrade_write\n\t" +LOCK_PREFIX " addl %2,(%%eax)\n\t" /* transitions 0xZZZZ0001 -> 0xYYYY0001 */ + " js 2f\n\t" /* jump if the lock is being waited upon */ + "1:\n\t" + LOCK_SECTION_START("") + "2:\n\t" + " pushl %%ecx\n\t" + " pushl %%edx\n\t" + " call rwsem_downgrade_wake\n\t" + " popl %%edx\n\t" + " popl %%ecx\n\t" + " jmp 1b\n" + LOCK_SECTION_END + "# ending __downgrade_write\n" + : "=m"(sem->count) + : "a"(sem), "i"(-RWSEM_WAITING_BIAS), "m"(sem->count) + : "memory", "cc"); +} + +/* + * implement atomic add functionality + */ +static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem) +{ + __asm__ __volatile__( +LOCK_PREFIX "addl %1,%0" + : "=m"(sem->count) + : "ir"(delta), "m"(sem->count)); +} + +/* + * implement exchange and add functionality + */ +static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem) +{ + int tmp = delta; + + __asm__ __volatile__( +LOCK_PREFIX "xadd %0,(%2)" + : "+r"(tmp), "=m"(sem->count) + : "r"(sem), "m"(sem->count) + : "memory"); + + return tmp+delta; +} + +#endif /* __KERNEL__ */ +#endif /* _I386_RWSEM_H */ diff --git a/include/asm-i386/scatterlist.h b/include/asm-i386/scatterlist.h new file mode 100644 index 00000000000..55d6c953a76 --- /dev/null +++ b/include/asm-i386/scatterlist.h @@ -0,0 +1,21 @@ +#ifndef _I386_SCATTERLIST_H +#define _I386_SCATTERLIST_H + +struct scatterlist { + struct page *page; + unsigned int offset; + dma_addr_t dma_address; + unsigned int length; +}; + +/* These macros should be used after a pci_map_sg call has been done + * to get bus addresses of each of the SG entries and their lengths. + * You should only work with the number of sg entries pci_map_sg + * returns. + */ +#define sg_dma_address(sg) ((sg)->dma_address) +#define sg_dma_len(sg) ((sg)->length) + +#define ISA_DMA_THRESHOLD (0x00ffffff) + +#endif /* !(_I386_SCATTERLIST_H) */ diff --git a/include/asm-i386/seccomp.h b/include/asm-i386/seccomp.h new file mode 100644 index 00000000000..18da19e89bf --- /dev/null +++ b/include/asm-i386/seccomp.h @@ -0,0 +1,16 @@ +#ifndef _ASM_SECCOMP_H + +#include + +#ifdef TIF_32BIT +#error "unexpected TIF_32BIT on i386" +#endif + +#include + +#define __NR_seccomp_read __NR_read +#define __NR_seccomp_write __NR_write +#define __NR_seccomp_exit __NR_exit +#define __NR_seccomp_sigreturn __NR_sigreturn + +#endif /* _ASM_SECCOMP_H */ diff --git a/include/asm-i386/sections.h b/include/asm-i386/sections.h new file mode 100644 index 00000000000..2dcbb92918b --- /dev/null +++ b/include/asm-i386/sections.h @@ -0,0 +1,7 @@ +#ifndef _I386_SECTIONS_H +#define _I386_SECTIONS_H + +/* nothing to see, move along */ +#include + +#endif diff --git a/include/asm-i386/segment.h b/include/asm-i386/segment.h new file mode 100644 index 00000000000..bb5ff5b2c02 --- /dev/null +++ b/include/asm-i386/segment.h @@ -0,0 +1,101 @@ +#ifndef _ASM_SEGMENT_H +#define _ASM_SEGMENT_H + +/* + * The layout of the per-CPU GDT under Linux: + * + * 0 - null + * 1 - reserved + * 2 - reserved + * 3 - reserved + * + * 4 - unused <==== new cacheline + * 5 - unused + * + * ------- start of TLS (Thread-Local Storage) segments: + * + * 6 - TLS segment #1 [ glibc's TLS segment ] + * 7 - TLS segment #2 [ Wine's %fs Win32 segment ] + * 8 - TLS segment #3 + * 9 - reserved + * 10 - reserved + * 11 - reserved + * + * ------- start of kernel segments: + * + * 12 - kernel code segment <==== new cacheline + * 13 - kernel data segment + * 14 - default user CS + * 15 - default user DS + * 16 - TSS + * 17 - LDT + * 18 - PNPBIOS support (16->32 gate) + * 19 - PNPBIOS support + * 20 - PNPBIOS support + * 21 - PNPBIOS support + * 22 - PNPBIOS support + * 23 - APM BIOS support + * 24 - APM BIOS support + * 25 - APM BIOS support + * + * 26 - ESPFIX small SS + * 27 - unused + * 28 - unused + * 29 - unused + * 30 - unused + * 31 - TSS for double fault handler + */ +#define GDT_ENTRY_TLS_ENTRIES 3 +#define GDT_ENTRY_TLS_MIN 6 +#define GDT_ENTRY_TLS_MAX (GDT_ENTRY_TLS_MIN + GDT_ENTRY_TLS_ENTRIES - 1) + +#define TLS_SIZE (GDT_ENTRY_TLS_ENTRIES * 8) + +#define GDT_ENTRY_DEFAULT_USER_CS 14 +#define __USER_CS (GDT_ENTRY_DEFAULT_USER_CS * 8 + 3) + +#define GDT_ENTRY_DEFAULT_USER_DS 15 +#define __USER_DS (GDT_ENTRY_DEFAULT_USER_DS * 8 + 3) + +#define GDT_ENTRY_KERNEL_BASE 12 + +#define GDT_ENTRY_KERNEL_CS (GDT_ENTRY_KERNEL_BASE + 0) +#define __KERNEL_CS (GDT_ENTRY_KERNEL_CS * 8) + +#define GDT_ENTRY_KERNEL_DS (GDT_ENTRY_KERNEL_BASE + 1) +#define __KERNEL_DS (GDT_ENTRY_KERNEL_DS * 8) + +#define GDT_ENTRY_TSS (GDT_ENTRY_KERNEL_BASE + 4) +#define GDT_ENTRY_LDT (GDT_ENTRY_KERNEL_BASE + 5) + +#define GDT_ENTRY_PNPBIOS_BASE (GDT_ENTRY_KERNEL_BASE + 6) +#define GDT_ENTRY_APMBIOS_BASE (GDT_ENTRY_KERNEL_BASE + 11) + +#define GDT_ENTRY_ESPFIX_SS (GDT_ENTRY_KERNEL_BASE + 14) +#define __ESPFIX_SS (GDT_ENTRY_ESPFIX_SS * 8) + +#define GDT_ENTRY_DOUBLEFAULT_TSS 31 + +/* + * The GDT has 32 entries + */ +#define GDT_ENTRIES 32 + +#define GDT_SIZE (GDT_ENTRIES * 8) + +/* Simple and small GDT entries for booting only */ + +#define GDT_ENTRY_BOOT_CS 2 +#define __BOOT_CS (GDT_ENTRY_BOOT_CS * 8) + +#define GDT_ENTRY_BOOT_DS (GDT_ENTRY_BOOT_CS + 1) +#define __BOOT_DS (GDT_ENTRY_BOOT_DS * 8) + +/* + * The interrupt descriptor table has room for 256 idt's, + * the global descriptor table is dependent on the number + * of tasks we can have.. + */ +#define IDT_ENTRIES 256 + +#endif diff --git a/include/asm-i386/semaphore.h b/include/asm-i386/semaphore.h new file mode 100644 index 00000000000..ea563da63e2 --- /dev/null +++ b/include/asm-i386/semaphore.h @@ -0,0 +1,194 @@ +#ifndef _I386_SEMAPHORE_H +#define _I386_SEMAPHORE_H + +#include + +#ifdef __KERNEL__ + +/* + * SMP- and interrupt-safe semaphores.. + * + * (C) Copyright 1996 Linus Torvalds + * + * Modified 1996-12-23 by Dave Grothe to fix bugs in + * the original code and to make semaphore waits + * interruptible so that processes waiting on + * semaphores can be killed. + * Modified 1999-02-14 by Andrea Arcangeli, split the sched.c helper + * functions in asm/sempahore-helper.h while fixing a + * potential and subtle race discovered by Ulrich Schmid + * in down_interruptible(). Since I started to play here I + * also implemented the `trylock' semaphore operation. + * 1999-07-02 Artur Skawina + * Optimized "0(ecx)" -> "(ecx)" (the assembler does not + * do this). Changed calling sequences from push/jmp to + * traditional call/ret. + * Modified 2001-01-01 Andreas Franck + * Some hacks to ensure compatibility with recent + * GCC snapshots, to avoid stack corruption when compiling + * with -fomit-frame-pointer. It's not sure if this will + * be fixed in GCC, as our previous implementation was a + * bit dubious. + * + * If you would like to see an analysis of this implementation, please + * ftp to gcom.com and download the file + * /pub/linux/src/semaphore/semaphore-2.0.24.tar.gz. + * + */ + +#include +#include +#include +#include + +struct semaphore { + atomic_t count; + int sleepers; + wait_queue_head_t wait; +}; + + +#define __SEMAPHORE_INITIALIZER(name, n) \ +{ \ + .count = ATOMIC_INIT(n), \ + .sleepers = 0, \ + .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \ +} + +#define __MUTEX_INITIALIZER(name) \ + __SEMAPHORE_INITIALIZER(name,1) + +#define __DECLARE_SEMAPHORE_GENERIC(name,count) \ + struct semaphore name = __SEMAPHORE_INITIALIZER(name,count) + +#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1) +#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0) + +static inline void sema_init (struct semaphore *sem, int val) +{ +/* + * *sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val); + * + * i'd rather use the more flexible initialization above, but sadly + * GCC 2.7.2.3 emits a bogus warning. EGCS doesn't. Oh well. + */ + atomic_set(&sem->count, val); + sem->sleepers = 0; + init_waitqueue_head(&sem->wait); +} + +static inline void init_MUTEX (struct semaphore *sem) +{ + sema_init(sem, 1); +} + +static inline void init_MUTEX_LOCKED (struct semaphore *sem) +{ + sema_init(sem, 0); +} + +fastcall void __down_failed(void /* special register calling convention */); +fastcall int __down_failed_interruptible(void /* params in registers */); +fastcall int __down_failed_trylock(void /* params in registers */); +fastcall void __up_wakeup(void /* special register calling convention */); + +/* + * This is ugly, but we want the default case to fall through. + * "__down_failed" is a special asm handler that calls the C + * routine that actually waits. See arch/i386/kernel/semaphore.c + */ +static inline void down(struct semaphore * sem) +{ + might_sleep(); + __asm__ __volatile__( + "# atomic down operation\n\t" + LOCK "decl %0\n\t" /* --sem->count */ + "js 2f\n" + "1:\n" + LOCK_SECTION_START("") + "2:\tlea %0,%%eax\n\t" + "call __down_failed\n\t" + "jmp 1b\n" + LOCK_SECTION_END + :"=m" (sem->count) + : + :"memory","ax"); +} + +/* + * Interruptible try to acquire a semaphore. If we obtained + * it, return zero. If we were interrupted, returns -EINTR + */ +static inline int down_interruptible(struct semaphore * sem) +{ + int result; + + might_sleep(); + __asm__ __volatile__( + "# atomic interruptible down operation\n\t" + LOCK "decl %1\n\t" /* --sem->count */ + "js 2f\n\t" + "xorl %0,%0\n" + "1:\n" + LOCK_SECTION_START("") + "2:\tlea %1,%%eax\n\t" + "call __down_failed_interruptible\n\t" + "jmp 1b\n" + LOCK_SECTION_END + :"=a" (result), "=m" (sem->count) + : + :"memory"); + return result; +} + +/* + * Non-blockingly attempt to down() a semaphore. + * Returns zero if we acquired it + */ +static inline int down_trylock(struct semaphore * sem) +{ + int result; + + __asm__ __volatile__( + "# atomic interruptible down operation\n\t" + LOCK "decl %1\n\t" /* --sem->count */ + "js 2f\n\t" + "xorl %0,%0\n" + "1:\n" + LOCK_SECTION_START("") + "2:\tlea %1,%%eax\n\t" + "call __down_failed_trylock\n\t" + "jmp 1b\n" + LOCK_SECTION_END + :"=a" (result), "=m" (sem->count) + : + :"memory"); + return result; +} + +/* + * Note! This is subtle. We jump to wake people up only if + * the semaphore was negative (== somebody was waiting on it). + * The default case (no contention) will result in NO + * jumps for both down() and up(). + */ +static inline void up(struct semaphore * sem) +{ + __asm__ __volatile__( + "# atomic up operation\n\t" + LOCK "incl %0\n\t" /* ++sem->count */ + "jle 2f\n" + "1:\n" + LOCK_SECTION_START("") + "2:\tlea %0,%%eax\n\t" + "call __up_wakeup\n\t" + "jmp 1b\n" + LOCK_SECTION_END + ".subsection 0\n" + :"=m" (sem->count) + : + :"memory","ax"); +} + +#endif +#endif diff --git a/include/asm-i386/sembuf.h b/include/asm-i386/sembuf.h new file mode 100644 index 00000000000..323835166c1 --- /dev/null +++ b/include/asm-i386/sembuf.h @@ -0,0 +1,25 @@ +#ifndef _I386_SEMBUF_H +#define _I386_SEMBUF_H + +/* + * The semid64_ds structure for i386 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused1; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long __unused2; + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _I386_SEMBUF_H */ diff --git a/include/asm-i386/serial.h b/include/asm-i386/serial.h new file mode 100644 index 00000000000..21ddecc77c7 --- /dev/null +++ b/include/asm-i386/serial.h @@ -0,0 +1,130 @@ +/* + * include/asm-i386/serial.h + */ + +#include + +/* + * This assumes you have a 1.8432 MHz clock for your UART. + * + * It'd be nice if someone built a serial card with a 24.576 MHz + * clock, since the 16550A is capable of handling a top speed of 1.5 + * megabits/second; but this requires the faster clock. + */ +#define BASE_BAUD ( 1843200 / 16 ) + +/* Standard COM flags (except for COM4, because of the 8514 problem) */ +#ifdef CONFIG_SERIAL_DETECT_IRQ +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ) +#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ) +#else +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) +#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF +#endif + +#ifdef CONFIG_SERIAL_MANY_PORTS +#define FOURPORT_FLAGS ASYNC_FOURPORT +#define ACCENT_FLAGS 0 +#define BOCA_FLAGS 0 +#define HUB6_FLAGS 0 +#endif + +#define MCA_COM_FLAGS (STD_COM_FLAGS|ASYNC_BOOT_ONLYMCA) + +/* + * The following define the access methods for the HUB6 card. All + * access is through two ports for all 24 possible chips. The card is + * selected through the high 2 bits, the port on that card with the + * "middle" 3 bits, and the register on that port with the bottom + * 3 bits. + * + * While the access port and interrupt is configurable, the default + * port locations are 0x302 for the port control register, and 0x303 + * for the data read/write register. Normally, the interrupt is at irq3 + * but can be anything from 3 to 7 inclusive. Note that using 3 will + * require disabling com2. + */ + +#define C_P(card,port) (((card)<<6|(port)<<3) + 1) + +#define STD_SERIAL_PORT_DEFNS \ + /* UART CLK PORT IRQ FLAGS */ \ + { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ + { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \ + { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \ + { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ + + +#ifdef CONFIG_SERIAL_MANY_PORTS +#define EXTRA_SERIAL_PORT_DEFNS \ + { 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, /* ttyS4 */ \ + { 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS }, /* ttyS5 */ \ + { 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS }, /* ttyS6 */ \ + { 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS }, /* ttyS7 */ \ + { 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS }, /* ttyS8 */ \ + { 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS }, /* ttyS9 */ \ + { 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS }, /* ttyS10 */ \ + { 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS }, /* ttyS11 */ \ + { 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS }, /* ttyS12 */ \ + { 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS }, /* ttyS13 */ \ + { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS14 (spare) */ \ + { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS15 (spare) */ \ + { 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS }, /* ttyS16 */ \ + { 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS }, /* ttyS17 */ \ + { 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS }, /* ttyS18 */ \ + { 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS }, /* ttyS19 */ \ + { 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS }, /* ttyS20 */ \ + { 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS }, /* ttyS21 */ \ + { 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS }, /* ttyS22 */ \ + { 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS }, /* ttyS23 */ \ + { 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS }, /* ttyS24 */ \ + { 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS }, /* ttyS25 */ \ + { 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS }, /* ttyS26 */ \ + { 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS }, /* ttyS27 */ \ + { 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS }, /* ttyS28 */ \ + { 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS }, /* ttyS29 */ \ + { 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS }, /* ttyS30 */ \ + { 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS }, /* ttyS31 */ +#else +#define EXTRA_SERIAL_PORT_DEFNS +#endif + +/* You can have up to four HUB6's in the system, but I've only + * included two cards here for a total of twelve ports. + */ +#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS)) +#define HUB6_SERIAL_PORT_DFNS \ + { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) }, /* ttyS32 */ \ + { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) }, /* ttyS33 */ \ + { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) }, /* ttyS34 */ \ + { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) }, /* ttyS35 */ \ + { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) }, /* ttyS36 */ \ + { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) }, /* ttyS37 */ \ + { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) }, /* ttyS38 */ \ + { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) }, /* ttyS39 */ \ + { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) }, /* ttyS40 */ \ + { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) }, /* ttyS41 */ \ + { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) }, /* ttyS42 */ \ + { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) }, /* ttyS43 */ +#else +#define HUB6_SERIAL_PORT_DFNS +#endif + +#ifdef CONFIG_MCA +#define MCA_SERIAL_PORT_DFNS \ + { 0, BASE_BAUD, 0x3220, 3, MCA_COM_FLAGS }, \ + { 0, BASE_BAUD, 0x3228, 3, MCA_COM_FLAGS }, \ + { 0, BASE_BAUD, 0x4220, 3, MCA_COM_FLAGS }, \ + { 0, BASE_BAUD, 0x4228, 3, MCA_COM_FLAGS }, \ + { 0, BASE_BAUD, 0x5220, 3, MCA_COM_FLAGS }, \ + { 0, BASE_BAUD, 0x5228, 3, MCA_COM_FLAGS }, +#else +#define MCA_SERIAL_PORT_DFNS +#endif + +#define SERIAL_PORT_DFNS \ + STD_SERIAL_PORT_DEFNS \ + EXTRA_SERIAL_PORT_DEFNS \ + HUB6_SERIAL_PORT_DFNS \ + MCA_SERIAL_PORT_DFNS + diff --git a/include/asm-i386/setup.h b/include/asm-i386/setup.h new file mode 100644 index 00000000000..8814b54c75d --- /dev/null +++ b/include/asm-i386/setup.h @@ -0,0 +1,66 @@ +/* + * Just a place holder. We don't want to have to test x86 before + * we include stuff + */ + +#ifndef _i386_SETUP_H +#define _i386_SETUP_H + +#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) +#define PFN_DOWN(x) ((x) >> PAGE_SHIFT) +#define PFN_PHYS(x) ((x) << PAGE_SHIFT) + +/* + * Reserved space for vmalloc and iomap - defined in asm/page.h + */ +#define MAXMEM_PFN PFN_DOWN(MAXMEM) +#define MAX_NONPAE_PFN (1 << 20) + +#define PARAM_SIZE 2048 +#define COMMAND_LINE_SIZE 256 + +#define OLD_CL_MAGIC_ADDR 0x90020 +#define OLD_CL_MAGIC 0xA33F +#define OLD_CL_BASE_ADDR 0x90000 +#define OLD_CL_OFFSET 0x90022 +#define NEW_CL_POINTER 0x228 /* Relative to real mode data */ + +#ifndef __ASSEMBLY__ +/* + * This is set up by the setup-routine at boot-time + */ +extern unsigned char boot_params[PARAM_SIZE]; + +#define PARAM (boot_params) +#define SCREEN_INFO (*(struct screen_info *) (PARAM+0)) +#define EXT_MEM_K (*(unsigned short *) (PARAM+2)) +#define ALT_MEM_K (*(unsigned long *) (PARAM+0x1e0)) +#define E820_MAP_NR (*(char*) (PARAM+E820NR)) +#define E820_MAP ((struct e820entry *) (PARAM+E820MAP)) +#define APM_BIOS_INFO (*(struct apm_bios_info *) (PARAM+0x40)) +#define IST_INFO (*(struct ist_info *) (PARAM+0x60)) +#define DRIVE_INFO (*(struct drive_info_struct *) (PARAM+0x80)) +#define SYS_DESC_TABLE (*(struct sys_desc_table_struct*)(PARAM+0xa0)) +#define EFI_SYSTAB ((efi_system_table_t *) *((unsigned long *)(PARAM+0x1c4))) +#define EFI_MEMDESC_SIZE (*((unsigned long *) (PARAM+0x1c8))) +#define EFI_MEMDESC_VERSION (*((unsigned long *) (PARAM+0x1cc))) +#define EFI_MEMMAP ((efi_memory_desc_t *) *((unsigned long *)(PARAM+0x1d0))) +#define EFI_MEMMAP_SIZE (*((unsigned long *) (PARAM+0x1d4))) +#define MOUNT_ROOT_RDONLY (*(unsigned short *) (PARAM+0x1F2)) +#define RAMDISK_FLAGS (*(unsigned short *) (PARAM+0x1F8)) +#define VIDEO_MODE (*(unsigned short *) (PARAM+0x1FA)) +#define ORIG_ROOT_DEV (*(unsigned short *) (PARAM+0x1FC)) +#define AUX_DEVICE_INFO (*(unsigned char *) (PARAM+0x1FF)) +#define LOADER_TYPE (*(unsigned char *) (PARAM+0x210)) +#define KERNEL_START (*(unsigned long *) (PARAM+0x214)) +#define INITRD_START (*(unsigned long *) (PARAM+0x218)) +#define INITRD_SIZE (*(unsigned long *) (PARAM+0x21c)) +#define EDID_INFO (*(struct edid_info *) (PARAM+0x140)) +#define EDD_NR (*(unsigned char *) (PARAM+EDDNR)) +#define EDD_MBR_SIG_NR (*(unsigned char *) (PARAM+EDD_MBR_SIG_NR_BUF)) +#define EDD_MBR_SIGNATURE ((unsigned int *) (PARAM+EDD_MBR_SIG_BUF)) +#define EDD_BUF ((struct edd_info *) (PARAM+EDDBUF)) + +#endif /* __ASSEMBLY__ */ + +#endif /* _i386_SETUP_H */ diff --git a/include/asm-i386/shmbuf.h b/include/asm-i386/shmbuf.h new file mode 100644 index 00000000000..d1cdc3cb079 --- /dev/null +++ b/include/asm-i386/shmbuf.h @@ -0,0 +1,42 @@ +#ifndef _I386_SHMBUF_H +#define _I386_SHMBUF_H + +/* + * The shmid64_ds structure for i386 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _I386_SHMBUF_H */ diff --git a/include/asm-i386/shmparam.h b/include/asm-i386/shmparam.h new file mode 100644 index 00000000000..786243a5b31 --- /dev/null +++ b/include/asm-i386/shmparam.h @@ -0,0 +1,6 @@ +#ifndef _ASMI386_SHMPARAM_H +#define _ASMI386_SHMPARAM_H + +#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ + +#endif /* _ASMI386_SHMPARAM_H */ diff --git a/include/asm-i386/sigcontext.h b/include/asm-i386/sigcontext.h new file mode 100644 index 00000000000..aaef089a778 --- /dev/null +++ b/include/asm-i386/sigcontext.h @@ -0,0 +1,85 @@ +#ifndef _ASMi386_SIGCONTEXT_H +#define _ASMi386_SIGCONTEXT_H + +#include + +/* + * As documented in the iBCS2 standard.. + * + * The first part of "struct _fpstate" is just the normal i387 + * hardware setup, the extra "status" word is used to save the + * coprocessor status word before entering the handler. + * + * Pentium III FXSR, SSE support + * Gareth Hughes , May 2000 + * + * The FPU state data structure has had to grow to accommodate the + * extended FPU state required by the Streaming SIMD Extensions. + * There is no documented standard to accomplish this at the moment. + */ +struct _fpreg { + unsigned short significand[4]; + unsigned short exponent; +}; + +struct _fpxreg { + unsigned short significand[4]; + unsigned short exponent; + unsigned short padding[3]; +}; + +struct _xmmreg { + unsigned long element[4]; +}; + +struct _fpstate { + /* Regular FPU environment */ + unsigned long cw; + unsigned long sw; + unsigned long tag; + unsigned long ipoff; + unsigned long cssel; + unsigned long dataoff; + unsigned long datasel; + struct _fpreg _st[8]; + unsigned short status; + unsigned short magic; /* 0xffff = regular FPU data only */ + + /* FXSR FPU environment */ + unsigned long _fxsr_env[6]; /* FXSR FPU env is ignored */ + unsigned long mxcsr; + unsigned long reserved; + struct _fpxreg _fxsr_st[8]; /* FXSR FPU reg data is ignored */ + struct _xmmreg _xmm[8]; + unsigned long padding[56]; +}; + +#define X86_FXSR_MAGIC 0x0000 + +struct sigcontext { + unsigned short gs, __gsh; + unsigned short fs, __fsh; + unsigned short es, __esh; + unsigned short ds, __dsh; + unsigned long edi; + unsigned long esi; + unsigned long ebp; + unsigned long esp; + unsigned long ebx; + unsigned long edx; + unsigned long ecx; + unsigned long eax; + unsigned long trapno; + unsigned long err; + unsigned long eip; + unsigned short cs, __csh; + unsigned long eflags; + unsigned long esp_at_signal; + unsigned short ss, __ssh; + struct _fpstate __user * fpstate; + unsigned long oldmask; + unsigned long cr2; +}; + + +#endif diff --git a/include/asm-i386/siginfo.h b/include/asm-i386/siginfo.h new file mode 100644 index 00000000000..fe18f98fccf --- /dev/null +++ b/include/asm-i386/siginfo.h @@ -0,0 +1,6 @@ +#ifndef _I386_SIGINFO_H +#define _I386_SIGINFO_H + +#include + +#endif diff --git a/include/asm-i386/signal.h b/include/asm-i386/signal.h new file mode 100644 index 00000000000..7ef343b6812 --- /dev/null +++ b/include/asm-i386/signal.h @@ -0,0 +1,237 @@ +#ifndef _ASMi386_SIGNAL_H +#define _ASMi386_SIGNAL_H + +#include +#include +#include +#include + +/* Avoid too many header ordering problems. */ +struct siginfo; + +#ifdef __KERNEL__ +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ + +#define _NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001u +#define SA_NOCLDWAIT 0x00000002u +#define SA_SIGINFO 0x00000004u +#define SA_ONSTACK 0x08000000u +#define SA_RESTART 0x10000000u +#define SA_NODEFER 0x40000000u +#define SA_RESETHAND 0x80000000u + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND +#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */ + +#define SA_RESTORER 0x04000000 + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#ifdef __KERNEL__ + +/* + * These values of sa_flags are used only by the kernel as part of the + * irq handling routines. + * + * SA_INTERRUPT is also used by the irq handling routines. + * SA_SHIRQ is for shared interrupt support on PCI and EISA. + */ +#define SA_PROBE SA_ONESHOT +#define SA_SAMPLE_RANDOM SA_RESTART +#define SA_SHIRQ 0x04000000 +#endif + +#define SIG_BLOCK 0 /* for blocking signals */ +#define SIG_UNBLOCK 1 /* for unblocking signals */ +#define SIG_SETMASK 2 /* for setting the signal mask */ + +/* Type of a signal handler. */ +typedef void __signalfn_t(int); +typedef __signalfn_t __user *__sighandler_t; + +typedef void __restorefn_t(void); +typedef __restorefn_t __user *__sigrestore_t; + +#define SIG_DFL ((__sighandler_t)0) /* default signal handling */ +#define SIG_IGN ((__sighandler_t)1) /* ignore signal */ +#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */ + +#ifdef __KERNEL__ +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + __sigrestore_t sa_restorer; +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + __sigrestore_t sa_restorer; + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ +#include + +#define __HAVE_ARCH_SIG_BITOPS + +static __inline__ void sigaddset(sigset_t *set, int _sig) +{ + __asm__("btsl %1,%0" : "=m"(*set) : "Ir"(_sig - 1) : "cc"); +} + +static __inline__ void sigdelset(sigset_t *set, int _sig) +{ + __asm__("btrl %1,%0" : "=m"(*set) : "Ir"(_sig - 1) : "cc"); +} + +static __inline__ int __const_sigismember(sigset_t *set, int _sig) +{ + unsigned long sig = _sig - 1; + return 1 & (set->sig[sig / _NSIG_BPW] >> (sig % _NSIG_BPW)); +} + +static __inline__ int __gen_sigismember(sigset_t *set, int _sig) +{ + int ret; + __asm__("btl %2,%1\n\tsbbl %0,%0" + : "=r"(ret) : "m"(*set), "Ir"(_sig-1) : "cc"); + return ret; +} + +#define sigismember(set,sig) \ + (__builtin_constant_p(sig) ? \ + __const_sigismember((set),(sig)) : \ + __gen_sigismember((set),(sig))) + +static __inline__ int sigfindinword(unsigned long word) +{ + __asm__("bsfl %1,%0" : "=r"(word) : "rm"(word) : "cc"); + return word; +} + +struct pt_regs; +extern int FASTCALL(do_signal(struct pt_regs *regs, sigset_t *oldset)); + +#define ptrace_signal_deliver(regs, cookie) \ + do { \ + if (current->ptrace & PT_DTRACE) { \ + current->ptrace &= ~PT_DTRACE; \ + (regs)->eflags &= ~TF_MASK; \ + } \ + } while (0) + +#endif /* __KERNEL__ */ + +#endif diff --git a/include/asm-i386/smp.h b/include/asm-i386/smp.h new file mode 100644 index 00000000000..dd1491225d5 --- /dev/null +++ b/include/asm-i386/smp.h @@ -0,0 +1,90 @@ +#ifndef __ASM_SMP_H +#define __ASM_SMP_H + +/* + * We need the APIC definitions automatically as part of 'smp.h' + */ +#ifndef __ASSEMBLY__ +#include +#include +#include +#include +#endif + +#ifdef CONFIG_X86_LOCAL_APIC +#ifndef __ASSEMBLY__ +#include +#include +#include +#ifdef CONFIG_X86_IO_APIC +#include +#endif +#include +#endif +#endif + +#define BAD_APICID 0xFFu +#ifdef CONFIG_SMP +#ifndef __ASSEMBLY__ + +/* + * Private routines/data + */ + +extern void smp_alloc_memory(void); +extern int pic_mode; +extern int smp_num_siblings; +extern cpumask_t cpu_sibling_map[]; + +extern void smp_flush_tlb(void); +extern void smp_message_irq(int cpl, void *dev_id, struct pt_regs *regs); +extern void smp_invalidate_rcv(void); /* Process an NMI */ +extern void (*mtrr_hook) (void); +extern void zap_low_mappings (void); + +#define MAX_APICID 256 +extern u8 x86_cpu_to_apicid[]; + +/* + * This function is needed by all SMP systems. It must _always_ be valid + * from the initial startup. We map APIC_BASE very early in page_setup(), + * so this is correct in the x86 case. + */ +#define __smp_processor_id() (current_thread_info()->cpu) + +extern cpumask_t cpu_callout_map; +extern cpumask_t cpu_callin_map; +#define cpu_possible_map cpu_callout_map + +/* We don't mark CPUs online until __cpu_up(), so we need another measure */ +static inline int num_booting_cpus(void) +{ + return cpus_weight(cpu_callout_map); +} + +#ifdef CONFIG_X86_LOCAL_APIC + +#ifdef APIC_DEFINITION +extern int hard_smp_processor_id(void); +#else +#include +static inline int hard_smp_processor_id(void) +{ + /* we don't want to mark this access volatile - bad code generation */ + return GET_APIC_ID(*(unsigned long *)(APIC_BASE+APIC_ID)); +} +#endif + +static __inline int logical_smp_processor_id(void) +{ + /* we don't want to mark this access volatile - bad code generation */ + return GET_APIC_LOGICAL_ID(*(unsigned long *)(APIC_BASE+APIC_LDR)); +} + +#endif +#endif /* !__ASSEMBLY__ */ + +#define NO_PROC_ID 0xFF /* No processor magic marker */ + +#endif +#endif diff --git a/include/asm-i386/socket.h b/include/asm-i386/socket.h new file mode 100644 index 00000000000..07f6b38ad14 --- /dev/null +++ b/include/asm-i386/socket.h @@ -0,0 +1,50 @@ +#ifndef _ASM_SOCKET_H +#define _ASM_SOCKET_H + +#include + +/* For setsockopt(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 + +#define SO_PEERSEC 31 + +#endif /* _ASM_SOCKET_H */ diff --git a/include/asm-i386/sockios.h b/include/asm-i386/sockios.h new file mode 100644 index 00000000000..6b747f8e228 --- /dev/null +++ b/include/asm-i386/sockios.h @@ -0,0 +1,12 @@ +#ifndef __ARCH_I386_SOCKIOS__ +#define __ARCH_I386_SOCKIOS__ + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp */ + +#endif diff --git a/include/asm-i386/spinlock.h b/include/asm-i386/spinlock.h new file mode 100644 index 00000000000..f9ff31f4003 --- /dev/null +++ b/include/asm-i386/spinlock.h @@ -0,0 +1,250 @@ +#ifndef __ASM_SPINLOCK_H +#define __ASM_SPINLOCK_H + +#include +#include +#include +#include +#include + +asmlinkage int printk(const char * fmt, ...) + __attribute__ ((format (printf, 1, 2))); + +/* + * Your basic SMP spinlocks, allowing only a single CPU anywhere + */ + +typedef struct { + volatile unsigned int slock; +#ifdef CONFIG_DEBUG_SPINLOCK + unsigned magic; +#endif +#ifdef CONFIG_PREEMPT + unsigned int break_lock; +#endif +} spinlock_t; + +#define SPINLOCK_MAGIC 0xdead4ead + +#ifdef CONFIG_DEBUG_SPINLOCK +#define SPINLOCK_MAGIC_INIT , SPINLOCK_MAGIC +#else +#define SPINLOCK_MAGIC_INIT /* */ +#endif + +#define SPIN_LOCK_UNLOCKED (spinlock_t) { 1 SPINLOCK_MAGIC_INIT } + +#define spin_lock_init(x) do { *(x) = SPIN_LOCK_UNLOCKED; } while(0) + +/* + * Simple spin lock operations. There are two variants, one clears IRQ's + * on the local processor, one does not. + * + * We make no fairness assumptions. They have a cost. + */ + +#define spin_is_locked(x) (*(volatile signed char *)(&(x)->slock) <= 0) +#define spin_unlock_wait(x) do { barrier(); } while(spin_is_locked(x)) + +#define spin_lock_string \ + "\n1:\t" \ + "lock ; decb %0\n\t" \ + "jns 3f\n" \ + "2:\t" \ + "rep;nop\n\t" \ + "cmpb $0,%0\n\t" \ + "jle 2b\n\t" \ + "jmp 1b\n" \ + "3:\n\t" + +#define spin_lock_string_flags \ + "\n1:\t" \ + "lock ; decb %0\n\t" \ + "jns 4f\n\t" \ + "2:\t" \ + "testl $0x200, %1\n\t" \ + "jz 3f\n\t" \ + "sti\n\t" \ + "3:\t" \ + "rep;nop\n\t" \ + "cmpb $0, %0\n\t" \ + "jle 3b\n\t" \ + "cli\n\t" \ + "jmp 1b\n" \ + "4:\n\t" + +/* + * This works. Despite all the confusion. + * (except on PPro SMP or if we are using OOSTORE) + * (PPro errata 66, 92) + */ + +#if !defined(CONFIG_X86_OOSTORE) && !defined(CONFIG_X86_PPRO_FENCE) + +#define spin_unlock_string \ + "movb $1,%0" \ + :"=m" (lock->slock) : : "memory" + + +static inline void _raw_spin_unlock(spinlock_t *lock) +{ +#ifdef CONFIG_DEBUG_SPINLOCK + BUG_ON(lock->magic != SPINLOCK_MAGIC); + BUG_ON(!spin_is_locked(lock)); +#endif + __asm__ __volatile__( + spin_unlock_string + ); +} + +#else + +#define spin_unlock_string \ + "xchgb %b0, %1" \ + :"=q" (oldval), "=m" (lock->slock) \ + :"0" (oldval) : "memory" + +static inline void _raw_spin_unlock(spinlock_t *lock) +{ + char oldval = 1; +#ifdef CONFIG_DEBUG_SPINLOCK + BUG_ON(lock->magic != SPINLOCK_MAGIC); + BUG_ON(!spin_is_locked(lock)); +#endif + __asm__ __volatile__( + spin_unlock_string + ); +} + +#endif + +static inline int _raw_spin_trylock(spinlock_t *lock) +{ + char oldval; + __asm__ __volatile__( + "xchgb %b0,%1" + :"=q" (oldval), "=m" (lock->slock) + :"0" (0) : "memory"); + return oldval > 0; +} + +static inline void _raw_spin_lock(spinlock_t *lock) +{ +#ifdef CONFIG_DEBUG_SPINLOCK + if (unlikely(lock->magic != SPINLOCK_MAGIC)) { + printk("eip: %p\n", __builtin_return_address(0)); + BUG(); + } +#endif + __asm__ __volatile__( + spin_lock_string + :"=m" (lock->slock) : : "memory"); +} + +static inline void _raw_spin_lock_flags (spinlock_t *lock, unsigned long flags) +{ +#ifdef CONFIG_DEBUG_SPINLOCK + if (unlikely(lock->magic != SPINLOCK_MAGIC)) { + printk("eip: %p\n", __builtin_return_address(0)); + BUG(); + } +#endif + __asm__ __volatile__( + spin_lock_string_flags + :"=m" (lock->slock) : "r" (flags) : "memory"); +} + +/* + * Read-write spinlocks, allowing multiple readers + * but only one writer. + * + * NOTE! it is quite common to have readers in interrupts + * but no interrupt writers. For those circumstances we + * can "mix" irq-safe locks - any writer needs to get a + * irq-safe write-lock, but readers can get non-irqsafe + * read-locks. + */ +typedef struct { + volatile unsigned int lock; +#ifdef CONFIG_DEBUG_SPINLOCK + unsigned magic; +#endif +#ifdef CONFIG_PREEMPT + unsigned int break_lock; +#endif +} rwlock_t; + +#define RWLOCK_MAGIC 0xdeaf1eed + +#ifdef CONFIG_DEBUG_SPINLOCK +#define RWLOCK_MAGIC_INIT , RWLOCK_MAGIC +#else +#define RWLOCK_MAGIC_INIT /* */ +#endif + +#define RW_LOCK_UNLOCKED (rwlock_t) { RW_LOCK_BIAS RWLOCK_MAGIC_INIT } + +#define rwlock_init(x) do { *(x) = RW_LOCK_UNLOCKED; } while(0) + +/** + * read_can_lock - would read_trylock() succeed? + * @lock: the rwlock in question. + */ +#define read_can_lock(x) ((int)(x)->lock > 0) + +/** + * write_can_lock - would write_trylock() succeed? + * @lock: the rwlock in question. + */ +#define write_can_lock(x) ((x)->lock == RW_LOCK_BIAS) + +/* + * On x86, we implement read-write locks as a 32-bit counter + * with the high bit (sign) being the "contended" bit. + * + * The inline assembly is non-obvious. Think about it. + * + * Changed to use the same technique as rw semaphores. See + * semaphore.h for details. -ben + */ +/* the spinlock helpers are in arch/i386/kernel/semaphore.c */ + +static inline void _raw_read_lock(rwlock_t *rw) +{ +#ifdef CONFIG_DEBUG_SPINLOCK + BUG_ON(rw->magic != RWLOCK_MAGIC); +#endif + __build_read_lock(rw, "__read_lock_failed"); +} + +static inline void _raw_write_lock(rwlock_t *rw) +{ +#ifdef CONFIG_DEBUG_SPINLOCK + BUG_ON(rw->magic != RWLOCK_MAGIC); +#endif + __build_write_lock(rw, "__write_lock_failed"); +} + +#define _raw_read_unlock(rw) asm volatile("lock ; incl %0" :"=m" ((rw)->lock) : : "memory") +#define _raw_write_unlock(rw) asm volatile("lock ; addl $" RW_LOCK_BIAS_STR ",%0":"=m" ((rw)->lock) : : "memory") + +static inline int _raw_read_trylock(rwlock_t *lock) +{ + atomic_t *count = (atomic_t *)lock; + atomic_dec(count); + if (atomic_read(count) >= 0) + return 1; + atomic_inc(count); + return 0; +} + +static inline int _raw_write_trylock(rwlock_t *lock) +{ + atomic_t *count = (atomic_t *)lock; + if (atomic_sub_and_test(RW_LOCK_BIAS, count)) + return 1; + atomic_add(RW_LOCK_BIAS, count); + return 0; +} + +#endif /* __ASM_SPINLOCK_H */ diff --git a/include/asm-i386/srat.h b/include/asm-i386/srat.h new file mode 100644 index 00000000000..165ab4bdc02 --- /dev/null +++ b/include/asm-i386/srat.h @@ -0,0 +1,37 @@ +/* + * Some of the code in this file has been gleaned from the 64 bit + * discontigmem support code base. + * + * Copyright (C) 2002, IBM Corp. + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to Pat Gaughen + */ + +#ifndef _ASM_SRAT_H_ +#define _ASM_SRAT_H_ + +#ifndef CONFIG_ACPI_SRAT +#error CONFIG_ACPI_SRAT not defined, and srat.h header has been included +#endif + +extern int get_memcfg_from_srat(void); +extern unsigned long *get_zholes_size(int); + +#endif /* _ASM_SRAT_H_ */ diff --git a/include/asm-i386/stat.h b/include/asm-i386/stat.h new file mode 100644 index 00000000000..b464f8020ec --- /dev/null +++ b/include/asm-i386/stat.h @@ -0,0 +1,78 @@ +#ifndef _I386_STAT_H +#define _I386_STAT_H + +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; + +struct stat { + unsigned long st_dev; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned long st_rdev; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + */ +struct stat64 { + unsigned long long st_dev; + unsigned char __pad0[4]; + +#define STAT64_HAS_BROKEN_ST_INO 1 + unsigned long __st_ino; + + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned long long st_rdev; + unsigned char __pad3[4]; + + long long st_size; + unsigned long st_blksize; + + unsigned long st_blocks; /* Number 512-byte blocks allocated. */ + unsigned long __pad4; /* future possible st_blocks high bits */ + + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned int st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; + + unsigned long long st_ino; +}; + +#define STAT_HAVE_NSEC 1 + +#endif diff --git a/include/asm-i386/statfs.h b/include/asm-i386/statfs.h new file mode 100644 index 00000000000..24972c17513 --- /dev/null +++ b/include/asm-i386/statfs.h @@ -0,0 +1,6 @@ +#ifndef _I386_STATFS_H +#define _I386_STATFS_H + +#include + +#endif diff --git a/include/asm-i386/string.h b/include/asm-i386/string.h new file mode 100644 index 00000000000..1679983d053 --- /dev/null +++ b/include/asm-i386/string.h @@ -0,0 +1,449 @@ +#ifndef _I386_STRING_H_ +#define _I386_STRING_H_ + +#ifdef __KERNEL__ +#include +/* + * On a 486 or Pentium, we are better off not using the + * byte string operations. But on a 386 or a PPro the + * byte string ops are faster than doing it by hand + * (MUCH faster on a Pentium). + */ + +/* + * This string-include defines all string functions as inline + * functions. Use gcc. It also assumes ds=es=data space, this should be + * normal. Most of the string-functions are rather heavily hand-optimized, + * see especially strsep,strstr,str[c]spn. They should work, but are not + * very easy to understand. Everything is done entirely within the register + * set, making the functions fast and clean. String instructions have been + * used through-out, making for "slightly" unclear code :-) + * + * NO Copyright (C) 1991, 1992 Linus Torvalds, + * consider these trivial functions to be PD. + */ + +/* AK: in fact I bet it would be better to move this stuff all out of line. + */ + +#define __HAVE_ARCH_STRCPY +static inline char * strcpy(char * dest,const char *src) +{ +int d0, d1, d2; +__asm__ __volatile__( + "1:\tlodsb\n\t" + "stosb\n\t" + "testb %%al,%%al\n\t" + "jne 1b" + : "=&S" (d0), "=&D" (d1), "=&a" (d2) + :"0" (src),"1" (dest) : "memory"); +return dest; +} + +#define __HAVE_ARCH_STRNCPY +static inline char * strncpy(char * dest,const char *src,size_t count) +{ +int d0, d1, d2, d3; +__asm__ __volatile__( + "1:\tdecl %2\n\t" + "js 2f\n\t" + "lodsb\n\t" + "stosb\n\t" + "testb %%al,%%al\n\t" + "jne 1b\n\t" + "rep\n\t" + "stosb\n" + "2:" + : "=&S" (d0), "=&D" (d1), "=&c" (d2), "=&a" (d3) + :"0" (src),"1" (dest),"2" (count) : "memory"); +return dest; +} + +#define __HAVE_ARCH_STRCAT +static inline char * strcat(char * dest,const char * src) +{ +int d0, d1, d2, d3; +__asm__ __volatile__( + "repne\n\t" + "scasb\n\t" + "decl %1\n" + "1:\tlodsb\n\t" + "stosb\n\t" + "testb %%al,%%al\n\t" + "jne 1b" + : "=&S" (d0), "=&D" (d1), "=&a" (d2), "=&c" (d3) + : "0" (src), "1" (dest), "2" (0), "3" (0xffffffffu):"memory"); +return dest; +} + +#define __HAVE_ARCH_STRNCAT +static inline char * strncat(char * dest,const char * src,size_t count) +{ +int d0, d1, d2, d3; +__asm__ __volatile__( + "repne\n\t" + "scasb\n\t" + "decl %1\n\t" + "movl %8,%3\n" + "1:\tdecl %3\n\t" + "js 2f\n\t" + "lodsb\n\t" + "stosb\n\t" + "testb %%al,%%al\n\t" + "jne 1b\n" + "2:\txorl %2,%2\n\t" + "stosb" + : "=&S" (d0), "=&D" (d1), "=&a" (d2), "=&c" (d3) + : "0" (src),"1" (dest),"2" (0),"3" (0xffffffffu), "g" (count) + : "memory"); +return dest; +} + +#define __HAVE_ARCH_STRCMP +static inline int strcmp(const char * cs,const char * ct) +{ +int d0, d1; +register int __res; +__asm__ __volatile__( + "1:\tlodsb\n\t" + "scasb\n\t" + "jne 2f\n\t" + "testb %%al,%%al\n\t" + "jne 1b\n\t" + "xorl %%eax,%%eax\n\t" + "jmp 3f\n" + "2:\tsbbl %%eax,%%eax\n\t" + "orb $1,%%al\n" + "3:" + :"=a" (__res), "=&S" (d0), "=&D" (d1) + :"1" (cs),"2" (ct)); +return __res; +} + +#define __HAVE_ARCH_STRNCMP +static inline int strncmp(const char * cs,const char * ct,size_t count) +{ +register int __res; +int d0, d1, d2; +__asm__ __volatile__( + "1:\tdecl %3\n\t" + "js 2f\n\t" + "lodsb\n\t" + "scasb\n\t" + "jne 3f\n\t" + "testb %%al,%%al\n\t" + "jne 1b\n" + "2:\txorl %%eax,%%eax\n\t" + "jmp 4f\n" + "3:\tsbbl %%eax,%%eax\n\t" + "orb $1,%%al\n" + "4:" + :"=a" (__res), "=&S" (d0), "=&D" (d1), "=&c" (d2) + :"1" (cs),"2" (ct),"3" (count)); +return __res; +} + +#define __HAVE_ARCH_STRCHR +static inline char * strchr(const char * s, int c) +{ +int d0; +register char * __res; +__asm__ __volatile__( + "movb %%al,%%ah\n" + "1:\tlodsb\n\t" + "cmpb %%ah,%%al\n\t" + "je 2f\n\t" + "testb %%al,%%al\n\t" + "jne 1b\n\t" + "movl $1,%1\n" + "2:\tmovl %1,%0\n\t" + "decl %0" + :"=a" (__res), "=&S" (d0) : "1" (s),"0" (c)); +return __res; +} + +#define __HAVE_ARCH_STRRCHR +static inline char * strrchr(const char * s, int c) +{ +int d0, d1; +register char * __res; +__asm__ __volatile__( + "movb %%al,%%ah\n" + "1:\tlodsb\n\t" + "cmpb %%ah,%%al\n\t" + "jne 2f\n\t" + "leal -1(%%esi),%0\n" + "2:\ttestb %%al,%%al\n\t" + "jne 1b" + :"=g" (__res), "=&S" (d0), "=&a" (d1) :"0" (0),"1" (s),"2" (c)); +return __res; +} + +#define __HAVE_ARCH_STRLEN +static inline size_t strlen(const char * s) +{ +int d0; +register int __res; +__asm__ __volatile__( + "repne\n\t" + "scasb\n\t" + "notl %0\n\t" + "decl %0" + :"=c" (__res), "=&D" (d0) :"1" (s),"a" (0), "0" (0xffffffffu)); +return __res; +} + +static inline void * __memcpy(void * to, const void * from, size_t n) +{ +int d0, d1, d2; +__asm__ __volatile__( + "rep ; movsl\n\t" + "testb $2,%b4\n\t" + "je 1f\n\t" + "movsw\n" + "1:\ttestb $1,%b4\n\t" + "je 2f\n\t" + "movsb\n" + "2:" + : "=&c" (d0), "=&D" (d1), "=&S" (d2) + :"0" (n/4), "q" (n),"1" ((long) to),"2" ((long) from) + : "memory"); +return (to); +} + +/* + * This looks horribly ugly, but the compiler can optimize it totally, + * as the count is constant. + */ +static inline void * __constant_memcpy(void * to, const void * from, size_t n) +{ + if (n <= 128) + return __builtin_memcpy(to, from, n); + +#define COMMON(x) \ +__asm__ __volatile__( \ + "rep ; movsl" \ + x \ + : "=&c" (d0), "=&D" (d1), "=&S" (d2) \ + : "0" (n/4),"1" ((long) to),"2" ((long) from) \ + : "memory"); +{ + int d0, d1, d2; + switch (n % 4) { + case 0: COMMON(""); return to; + case 1: COMMON("\n\tmovsb"); return to; + case 2: COMMON("\n\tmovsw"); return to; + default: COMMON("\n\tmovsw\n\tmovsb"); return to; + } +} + +#undef COMMON +} + +#define __HAVE_ARCH_MEMCPY + +#ifdef CONFIG_X86_USE_3DNOW + +#include + +/* + * This CPU favours 3DNow strongly (eg AMD Athlon) + */ + +static inline void * __constant_memcpy3d(void * to, const void * from, size_t len) +{ + if (len < 512) + return __constant_memcpy(to, from, len); + return _mmx_memcpy(to, from, len); +} + +static __inline__ void *__memcpy3d(void *to, const void *from, size_t len) +{ + if (len < 512) + return __memcpy(to, from, len); + return _mmx_memcpy(to, from, len); +} + +#define memcpy(t, f, n) \ +(__builtin_constant_p(n) ? \ + __constant_memcpy3d((t),(f),(n)) : \ + __memcpy3d((t),(f),(n))) + +#else + +/* + * No 3D Now! + */ + +#define memcpy(t, f, n) \ +(__builtin_constant_p(n) ? \ + __constant_memcpy((t),(f),(n)) : \ + __memcpy((t),(f),(n))) + +#endif + +#define __HAVE_ARCH_MEMMOVE +void *memmove(void * dest,const void * src, size_t n); + +#define memcmp __builtin_memcmp + +#define __HAVE_ARCH_MEMCHR +static inline void * memchr(const void * cs,int c,size_t count) +{ +int d0; +register void * __res; +if (!count) + return NULL; +__asm__ __volatile__( + "repne\n\t" + "scasb\n\t" + "je 1f\n\t" + "movl $1,%0\n" + "1:\tdecl %0" + :"=D" (__res), "=&c" (d0) : "a" (c),"0" (cs),"1" (count)); +return __res; +} + +static inline void * __memset_generic(void * s, char c,size_t count) +{ +int d0, d1; +__asm__ __volatile__( + "rep\n\t" + "stosb" + : "=&c" (d0), "=&D" (d1) + :"a" (c),"1" (s),"0" (count) + :"memory"); +return s; +} + +/* we might want to write optimized versions of these later */ +#define __constant_count_memset(s,c,count) __memset_generic((s),(c),(count)) + +/* + * memset(x,0,y) is a reasonably common thing to do, so we want to fill + * things 32 bits at a time even when we don't know the size of the + * area at compile-time.. + */ +static inline void * __constant_c_memset(void * s, unsigned long c, size_t count) +{ +int d0, d1; +__asm__ __volatile__( + "rep ; stosl\n\t" + "testb $2,%b3\n\t" + "je 1f\n\t" + "stosw\n" + "1:\ttestb $1,%b3\n\t" + "je 2f\n\t" + "stosb\n" + "2:" + : "=&c" (d0), "=&D" (d1) + :"a" (c), "q" (count), "0" (count/4), "1" ((long) s) + :"memory"); +return (s); +} + +/* Added by Gertjan van Wingerde to make minix and sysv module work */ +#define __HAVE_ARCH_STRNLEN +static inline size_t strnlen(const char * s, size_t count) +{ +int d0; +register int __res; +__asm__ __volatile__( + "movl %2,%0\n\t" + "jmp 2f\n" + "1:\tcmpb $0,(%0)\n\t" + "je 3f\n\t" + "incl %0\n" + "2:\tdecl %1\n\t" + "cmpl $-1,%1\n\t" + "jne 1b\n" + "3:\tsubl %2,%0" + :"=a" (__res), "=&d" (d0) + :"c" (s),"1" (count)); +return __res; +} +/* end of additional stuff */ + +#define __HAVE_ARCH_STRSTR + +extern char *strstr(const char *cs, const char *ct); + +/* + * This looks horribly ugly, but the compiler can optimize it totally, + * as we by now know that both pattern and count is constant.. + */ +static inline void * __constant_c_and_count_memset(void * s, unsigned long pattern, size_t count) +{ + switch (count) { + case 0: + return s; + case 1: + *(unsigned char *)s = pattern; + return s; + case 2: + *(unsigned short *)s = pattern; + return s; + case 3: + *(unsigned short *)s = pattern; + *(2+(unsigned char *)s) = pattern; + return s; + case 4: + *(unsigned long *)s = pattern; + return s; + } +#define COMMON(x) \ +__asm__ __volatile__( \ + "rep ; stosl" \ + x \ + : "=&c" (d0), "=&D" (d1) \ + : "a" (pattern),"0" (count/4),"1" ((long) s) \ + : "memory") +{ + int d0, d1; + switch (count % 4) { + case 0: COMMON(""); return s; + case 1: COMMON("\n\tstosb"); return s; + case 2: COMMON("\n\tstosw"); return s; + default: COMMON("\n\tstosw\n\tstosb"); return s; + } +} + +#undef COMMON +} + +#define __constant_c_x_memset(s, c, count) \ +(__builtin_constant_p(count) ? \ + __constant_c_and_count_memset((s),(c),(count)) : \ + __constant_c_memset((s),(c),(count))) + +#define __memset(s, c, count) \ +(__builtin_constant_p(count) ? \ + __constant_count_memset((s),(c),(count)) : \ + __memset_generic((s),(c),(count))) + +#define __HAVE_ARCH_MEMSET +#define memset(s, c, count) \ +(__builtin_constant_p(c) ? \ + __constant_c_x_memset((s),(0x01010101UL*(unsigned char)(c)),(count)) : \ + __memset((s),(c),(count))) + +/* + * find the first occurrence of byte 'c', or 1 past the area if none + */ +#define __HAVE_ARCH_MEMSCAN +static inline void * memscan(void * addr, int c, size_t size) +{ + if (!size) + return addr; + __asm__("repnz; scasb\n\t" + "jnz 1f\n\t" + "dec %%edi\n" + "1:" + : "=D" (addr), "=c" (size) + : "0" (addr), "1" (size), "a" (c)); + return addr; +} + +#endif /* __KERNEL__ */ + +#endif diff --git a/include/asm-i386/suspend.h b/include/asm-i386/suspend.h new file mode 100644 index 00000000000..dfc1114c1b6 --- /dev/null +++ b/include/asm-i386/suspend.h @@ -0,0 +1,66 @@ +/* + * Copyright 2001-2002 Pavel Machek + * Based on code + * Copyright 2001 Patrick Mochel + */ +#include +#include + +static inline int +arch_prepare_suspend(void) +{ + /* If you want to make non-PSE machine work, turn off paging + in swsusp_arch_suspend. swsusp_pg_dir should have identity mapping, so + it could work... */ + if (!cpu_has_pse) { + printk(KERN_ERR "PSE is required for swsusp.\n"); + return -EPERM; + } + return 0; +} + +/* image of the saved processor state */ +struct saved_context { + u16 es, fs, gs, ss; + unsigned long cr0, cr2, cr3, cr4; + u16 gdt_pad; + u16 gdt_limit; + unsigned long gdt_base; + u16 idt_pad; + u16 idt_limit; + unsigned long idt_base; + u16 ldt; + u16 tss; + unsigned long tr; + unsigned long safety; + unsigned long return_address; +} __attribute__((packed)); + +#define loaddebug(thread,register) \ + __asm__("movl %0,%%db" #register \ + : /* no output */ \ + :"r" ((thread)->debugreg[register])) + +#ifdef CONFIG_ACPI_SLEEP +extern unsigned long saved_eip; +extern unsigned long saved_esp; +extern unsigned long saved_ebp; +extern unsigned long saved_ebx; +extern unsigned long saved_esi; +extern unsigned long saved_edi; + +static inline void acpi_save_register_state(unsigned long return_point) +{ + saved_eip = return_point; + asm volatile ("movl %%esp,%0" : "=m" (saved_esp)); + asm volatile ("movl %%ebp,%0" : "=m" (saved_ebp)); + asm volatile ("movl %%ebx,%0" : "=m" (saved_ebx)); + asm volatile ("movl %%edi,%0" : "=m" (saved_edi)); + asm volatile ("movl %%esi,%0" : "=m" (saved_esi)); +} + +#define acpi_restore_register_state() do {} while (0) + +/* routines for saving/restoring kernel state */ +extern int acpi_save_state_mem(void); +#endif diff --git a/include/asm-i386/system.h b/include/asm-i386/system.h new file mode 100644 index 00000000000..6f74d4c44a0 --- /dev/null +++ b/include/asm-i386/system.h @@ -0,0 +1,473 @@ +#ifndef __ASM_SYSTEM_H +#define __ASM_SYSTEM_H + +#include +#include +#include +#include +#include /* for LOCK_PREFIX */ + +#ifdef __KERNEL__ + +struct task_struct; /* one of the stranger aspects of C forward declarations.. */ +extern struct task_struct * FASTCALL(__switch_to(struct task_struct *prev, struct task_struct *next)); + +#define switch_to(prev,next,last) do { \ + unsigned long esi,edi; \ + asm volatile("pushfl\n\t" \ + "pushl %%ebp\n\t" \ + "movl %%esp,%0\n\t" /* save ESP */ \ + "movl %5,%%esp\n\t" /* restore ESP */ \ + "movl $1f,%1\n\t" /* save EIP */ \ + "pushl %6\n\t" /* restore EIP */ \ + "jmp __switch_to\n" \ + "1:\t" \ + "popl %%ebp\n\t" \ + "popfl" \ + :"=m" (prev->thread.esp),"=m" (prev->thread.eip), \ + "=a" (last),"=S" (esi),"=D" (edi) \ + :"m" (next->thread.esp),"m" (next->thread.eip), \ + "2" (prev), "d" (next)); \ +} while (0) + +#define _set_base(addr,base) do { unsigned long __pr; \ +__asm__ __volatile__ ("movw %%dx,%1\n\t" \ + "rorl $16,%%edx\n\t" \ + "movb %%dl,%2\n\t" \ + "movb %%dh,%3" \ + :"=&d" (__pr) \ + :"m" (*((addr)+2)), \ + "m" (*((addr)+4)), \ + "m" (*((addr)+7)), \ + "0" (base) \ + ); } while(0) + +#define _set_limit(addr,limit) do { unsigned long __lr; \ +__asm__ __volatile__ ("movw %%dx,%1\n\t" \ + "rorl $16,%%edx\n\t" \ + "movb %2,%%dh\n\t" \ + "andb $0xf0,%%dh\n\t" \ + "orb %%dh,%%dl\n\t" \ + "movb %%dl,%2" \ + :"=&d" (__lr) \ + :"m" (*(addr)), \ + "m" (*((addr)+6)), \ + "0" (limit) \ + ); } while(0) + +#define set_base(ldt,base) _set_base( ((char *)&(ldt)) , (base) ) +#define set_limit(ldt,limit) _set_limit( ((char *)&(ldt)) , ((limit)-1)>>12 ) + +static inline unsigned long _get_base(char * addr) +{ + unsigned long __base; + __asm__("movb %3,%%dh\n\t" + "movb %2,%%dl\n\t" + "shll $16,%%edx\n\t" + "movw %1,%%dx" + :"=&d" (__base) + :"m" (*((addr)+2)), + "m" (*((addr)+4)), + "m" (*((addr)+7))); + return __base; +} + +#define get_base(ldt) _get_base( ((char *)&(ldt)) ) + +/* + * Load a segment. Fall back on loading the zero + * segment if something goes wrong.. + */ +#define loadsegment(seg,value) \ + asm volatile("\n" \ + "1:\t" \ + "movl %0,%%" #seg "\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3:\t" \ + "pushl $0\n\t" \ + "popl %%" #seg "\n\t" \ + "jmp 2b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n\t" \ + ".align 4\n\t" \ + ".long 1b,3b\n" \ + ".previous" \ + : :"m" (*(unsigned int *)&(value))) + +/* + * Save a segment register away + */ +#define savesegment(seg, value) \ + asm volatile("movl %%" #seg ",%0":"=m" (*(int *)&(value))) + +/* + * Clear and set 'TS' bit respectively + */ +#define clts() __asm__ __volatile__ ("clts") +#define read_cr0() ({ \ + unsigned int __dummy; \ + __asm__( \ + "movl %%cr0,%0\n\t" \ + :"=r" (__dummy)); \ + __dummy; \ +}) +#define write_cr0(x) \ + __asm__("movl %0,%%cr0": :"r" (x)); + +#define read_cr4() ({ \ + unsigned int __dummy; \ + __asm__( \ + "movl %%cr4,%0\n\t" \ + :"=r" (__dummy)); \ + __dummy; \ +}) +#define write_cr4(x) \ + __asm__("movl %0,%%cr4": :"r" (x)); +#define stts() write_cr0(8 | read_cr0()) + +#endif /* __KERNEL__ */ + +#define wbinvd() \ + __asm__ __volatile__ ("wbinvd": : :"memory"); + +static inline unsigned long get_limit(unsigned long segment) +{ + unsigned long __limit; + __asm__("lsll %1,%0" + :"=r" (__limit):"r" (segment)); + return __limit+1; +} + +#define nop() __asm__ __volatile__ ("nop") + +#define xchg(ptr,v) ((__typeof__(*(ptr)))__xchg((unsigned long)(v),(ptr),sizeof(*(ptr)))) + +#define tas(ptr) (xchg((ptr),1)) + +struct __xchg_dummy { unsigned long a[100]; }; +#define __xg(x) ((struct __xchg_dummy *)(x)) + + +/* + * The semantics of XCHGCMP8B are a bit strange, this is why + * there is a loop and the loading of %%eax and %%edx has to + * be inside. This inlines well in most cases, the cached + * cost is around ~38 cycles. (in the future we might want + * to do an SIMD/3DNOW!/MMX/FPU 64-bit store here, but that + * might have an implicit FPU-save as a cost, so it's not + * clear which path to go.) + * + * cmpxchg8b must be used with the lock prefix here to allow + * the instruction to be executed atomically, see page 3-102 + * of the instruction set reference 24319102.pdf. We need + * the reader side to see the coherent 64bit value. + */ +static inline void __set_64bit (unsigned long long * ptr, + unsigned int low, unsigned int high) +{ + __asm__ __volatile__ ( + "\n1:\t" + "movl (%0), %%eax\n\t" + "movl 4(%0), %%edx\n\t" + "lock cmpxchg8b (%0)\n\t" + "jnz 1b" + : /* no outputs */ + : "D"(ptr), + "b"(low), + "c"(high) + : "ax","dx","memory"); +} + +static inline void __set_64bit_constant (unsigned long long *ptr, + unsigned long long value) +{ + __set_64bit(ptr,(unsigned int)(value), (unsigned int)((value)>>32ULL)); +} +#define ll_low(x) *(((unsigned int*)&(x))+0) +#define ll_high(x) *(((unsigned int*)&(x))+1) + +static inline void __set_64bit_var (unsigned long long *ptr, + unsigned long long value) +{ + __set_64bit(ptr,ll_low(value), ll_high(value)); +} + +#define set_64bit(ptr,value) \ +(__builtin_constant_p(value) ? \ + __set_64bit_constant(ptr, value) : \ + __set_64bit_var(ptr, value) ) + +#define _set_64bit(ptr,value) \ +(__builtin_constant_p(value) ? \ + __set_64bit(ptr, (unsigned int)(value), (unsigned int)((value)>>32ULL) ) : \ + __set_64bit(ptr, ll_low(value), ll_high(value)) ) + +/* + * Note: no "lock" prefix even on SMP: xchg always implies lock anyway + * Note 2: xchg has side effect, so that attribute volatile is necessary, + * but generally the primitive is invalid, *ptr is output argument. --ANK + */ +static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) +{ + switch (size) { + case 1: + __asm__ __volatile__("xchgb %b0,%1" + :"=q" (x) + :"m" (*__xg(ptr)), "0" (x) + :"memory"); + break; + case 2: + __asm__ __volatile__("xchgw %w0,%1" + :"=r" (x) + :"m" (*__xg(ptr)), "0" (x) + :"memory"); + break; + case 4: + __asm__ __volatile__("xchgl %0,%1" + :"=r" (x) + :"m" (*__xg(ptr)), "0" (x) + :"memory"); + break; + } + return x; +} + +/* + * Atomic compare and exchange. Compare OLD with MEM, if identical, + * store NEW in MEM. Return the initial value in MEM. Success is + * indicated by comparing RETURN with OLD. + */ + +#ifdef CONFIG_X86_CMPXCHG +#define __HAVE_ARCH_CMPXCHG 1 +#endif + +static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, + unsigned long new, int size) +{ + unsigned long prev; + switch (size) { + case 1: + __asm__ __volatile__(LOCK_PREFIX "cmpxchgb %b1,%2" + : "=a"(prev) + : "q"(new), "m"(*__xg(ptr)), "0"(old) + : "memory"); + return prev; + case 2: + __asm__ __volatile__(LOCK_PREFIX "cmpxchgw %w1,%2" + : "=a"(prev) + : "q"(new), "m"(*__xg(ptr)), "0"(old) + : "memory"); + return prev; + case 4: + __asm__ __volatile__(LOCK_PREFIX "cmpxchgl %1,%2" + : "=a"(prev) + : "q"(new), "m"(*__xg(ptr)), "0"(old) + : "memory"); + return prev; + } + return old; +} + +#define cmpxchg(ptr,o,n)\ + ((__typeof__(*(ptr)))__cmpxchg((ptr),(unsigned long)(o),\ + (unsigned long)(n),sizeof(*(ptr)))) + +#ifdef __KERNEL__ +struct alt_instr { + __u8 *instr; /* original instruction */ + __u8 *replacement; + __u8 cpuid; /* cpuid bit set for replacement */ + __u8 instrlen; /* length of original instruction */ + __u8 replacementlen; /* length of new instruction, <= instrlen */ + __u8 pad; +}; +#endif + +/* + * Alternative instructions for different CPU types or capabilities. + * + * This allows to use optimized instructions even on generic binary + * kernels. + * + * length of oldinstr must be longer or equal the length of newinstr + * It can be padded with nops as needed. + * + * For non barrier like inlines please define new variants + * without volatile and memory clobber. + */ +#define alternative(oldinstr, newinstr, feature) \ + asm volatile ("661:\n\t" oldinstr "\n662:\n" \ + ".section .altinstructions,\"a\"\n" \ + " .align 4\n" \ + " .long 661b\n" /* label */ \ + " .long 663f\n" /* new instruction */ \ + " .byte %c0\n" /* feature bit */ \ + " .byte 662b-661b\n" /* sourcelen */ \ + " .byte 664f-663f\n" /* replacementlen */ \ + ".previous\n" \ + ".section .altinstr_replacement,\"ax\"\n" \ + "663:\n\t" newinstr "\n664:\n" /* replacement */ \ + ".previous" :: "i" (feature) : "memory") + +/* + * Alternative inline assembly with input. + * + * Pecularities: + * No memory clobber here. + * Argument numbers start with 1. + * Best is to use constraints that are fixed size (like (%1) ... "r") + * If you use variable sized constraints like "m" or "g" in the + * replacement maake sure to pad to the worst case length. + */ +#define alternative_input(oldinstr, newinstr, feature, input...) \ + asm volatile ("661:\n\t" oldinstr "\n662:\n" \ + ".section .altinstructions,\"a\"\n" \ + " .align 4\n" \ + " .long 661b\n" /* label */ \ + " .long 663f\n" /* new instruction */ \ + " .byte %c0\n" /* feature bit */ \ + " .byte 662b-661b\n" /* sourcelen */ \ + " .byte 664f-663f\n" /* replacementlen */ \ + ".previous\n" \ + ".section .altinstr_replacement,\"ax\"\n" \ + "663:\n\t" newinstr "\n664:\n" /* replacement */ \ + ".previous" :: "i" (feature), ##input) + +/* + * Force strict CPU ordering. + * And yes, this is required on UP too when we're talking + * to devices. + * + * For now, "wmb()" doesn't actually do anything, as all + * Intel CPU's follow what Intel calls a *Processor Order*, + * in which all writes are seen in the program order even + * outside the CPU. + * + * I expect future Intel CPU's to have a weaker ordering, + * but I'd also expect them to finally get their act together + * and add some real memory barriers if so. + * + * Some non intel clones support out of order store. wmb() ceases to be a + * nop for these. + */ + + +/* + * Actually only lfence would be needed for mb() because all stores done + * by the kernel should be already ordered. But keep a full barrier for now. + */ + +#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2) +#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2) + +/** + * read_barrier_depends - Flush all pending reads that subsequents reads + * depend on. + * + * No data-dependent reads from memory-like regions are ever reordered + * over this barrier. All reads preceding this primitive are guaranteed + * to access memory (but not necessarily other CPUs' caches) before any + * reads following this primitive that depend on the data return by + * any of the preceding reads. This primitive is much lighter weight than + * rmb() on most CPUs, and is never heavier weight than is + * rmb(). + * + * These ordering constraints are respected by both the local CPU + * and the compiler. + * + * Ordering is not guaranteed by anything other than these primitives, + * not even by data dependencies. See the documentation for + * memory_barrier() for examples and URLs to more information. + * + * For example, the following code would force ordering (the initial + * value of "a" is zero, "b" is one, and "p" is "&a"): + * + * + * CPU 0 CPU 1 + * + * b = 2; + * memory_barrier(); + * p = &b; q = p; + * read_barrier_depends(); + * d = *q; + * + * + * because the read of "*q" depends on the read of "p" and these + * two reads are separated by a read_barrier_depends(). However, + * the following code, with the same initial values for "a" and "b": + * + * + * CPU 0 CPU 1 + * + * a = 2; + * memory_barrier(); + * b = 3; y = b; + * read_barrier_depends(); + * x = a; + * + * + * does not enforce ordering, since there is no data dependency between + * the read of "a" and the read of "b". Therefore, on some CPUs, such + * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb() + * in cases like thiswhere there are no data dependencies. + **/ + +#define read_barrier_depends() do { } while(0) + +#ifdef CONFIG_X86_OOSTORE +/* Actually there are no OOO store capable CPUs for now that do SSE, + but make it already an possibility. */ +#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM) +#else +#define wmb() __asm__ __volatile__ ("": : :"memory") +#endif + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#define smp_read_barrier_depends() read_barrier_depends() +#define set_mb(var, value) do { xchg(&var, value); } while (0) +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() do { } while(0) +#define set_mb(var, value) do { var = value; barrier(); } while (0) +#endif + +#define set_wmb(var, value) do { var = value; wmb(); } while (0) + +/* interrupt control.. */ +#define local_save_flags(x) do { typecheck(unsigned long,x); __asm__ __volatile__("pushfl ; popl %0":"=g" (x): /* no input */); } while (0) +#define local_irq_restore(x) do { typecheck(unsigned long,x); __asm__ __volatile__("pushl %0 ; popfl": /* no output */ :"g" (x):"memory", "cc"); } while (0) +#define local_irq_disable() __asm__ __volatile__("cli": : :"memory") +#define local_irq_enable() __asm__ __volatile__("sti": : :"memory") +/* used in the idle loop; sti takes one instruction cycle to complete */ +#define safe_halt() __asm__ __volatile__("sti; hlt": : :"memory") + +#define irqs_disabled() \ +({ \ + unsigned long flags; \ + local_save_flags(flags); \ + !(flags & (1<<9)); \ +}) + +/* For spinlocks etc */ +#define local_irq_save(x) __asm__ __volatile__("pushfl ; popl %0 ; cli":"=g" (x): /* no input */ :"memory") + +/* + * disable hlt during certain critical i/o operations + */ +#define HAVE_DISABLE_HLT +void disable_hlt(void); +void enable_hlt(void); + +extern int es7000_plat; +void cpu_idle_wait(void); + +extern unsigned long arch_align_stack(unsigned long sp); + +#endif diff --git a/include/asm-i386/termbits.h b/include/asm-i386/termbits.h new file mode 100644 index 00000000000..72c10e3190f --- /dev/null +++ b/include/asm-i386/termbits.h @@ -0,0 +1,173 @@ +#ifndef __ARCH_I386_TERMBITS_H__ +#define __ARCH_I386_TERMBITS_H__ + +#include + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate (not used) */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +/* c_lflag bits */ +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif diff --git a/include/asm-i386/termios.h b/include/asm-i386/termios.h new file mode 100644 index 00000000000..03f548536d6 --- /dev/null +++ b/include/asm-i386/termios.h @@ -0,0 +1,107 @@ +#ifndef _I386_TERMIOS_H +#define _I386_TERMIOS_H + +#include +#include + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + +/* line disciplines */ +#define N_TTY 0 +#define N_SLIP 1 +#define N_MOUSE 2 +#define N_PPP 3 +#define N_STRIP 4 +#define N_AX25 5 +#define N_X25 6 /* X.25 async */ +#define N_6PACK 7 +#define N_MASC 8 /* Reserved for Mobitex module */ +#define N_R3964 9 /* Reserved for Simatic R3964 module */ +#define N_PROFIBUS_FDL 10 /* Reserved for Profibus */ +#define N_IRDA 11 /* Linux IR - http://irda.sourceforge.net/ */ +#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data cards about SMS messages */ +#define N_HDLC 13 /* synchronous HDLC */ +#define N_SYNC_PPP 14 /* synchronous PPP */ +#define N_HCI 15 /* Bluetooth HCI UART */ + +#ifdef __KERNEL__ +#include + +/* intr=^C quit=^\ erase=del kill=^U + eof=^D vtime=\0 vmin=\1 sxtc=\0 + start=^Q stop=^S susp=^Z eol=\0 + reprint=^R discard=^U werase=^W lnext=^V + eol2=\0 +*/ +#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" + +/* + * Translate a "termio" structure into a "termios". Ugh. + */ +#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ + unsigned short __tmp; \ + get_user(__tmp,&(termio)->x); \ + *(unsigned short *) &(termios)->x = __tmp; \ +} + +#define user_termio_to_kernel_termios(termios, termio) \ +({ \ + SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ + copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ +}) + +/* + * Translate a "termios" structure into a "termio". Ugh. + */ +#define kernel_termios_to_user_termio(termio, termios) \ +({ \ + put_user((termios)->c_iflag, &(termio)->c_iflag); \ + put_user((termios)->c_oflag, &(termio)->c_oflag); \ + put_user((termios)->c_cflag, &(termio)->c_cflag); \ + put_user((termios)->c_lflag, &(termio)->c_lflag); \ + put_user((termios)->c_line, &(termio)->c_line); \ + copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ +}) + +#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios)) + +#endif /* __KERNEL__ */ + +#endif /* _I386_TERMIOS_H */ diff --git a/include/asm-i386/thread_info.h b/include/asm-i386/thread_info.h new file mode 100644 index 00000000000..2cd57271801 --- /dev/null +++ b/include/asm-i386/thread_info.h @@ -0,0 +1,174 @@ +/* thread_info.h: i386 low-level thread information + * + * Copyright (C) 2002 David Howells (dhowells@redhat.com) + * - Incorporating suggestions made by Linus Torvalds and Dave Miller + */ + +#ifndef _ASM_THREAD_INFO_H +#define _ASM_THREAD_INFO_H + +#ifdef __KERNEL__ + +#include +#include +#include + +#ifndef __ASSEMBLY__ +#include +#endif + +/* + * low level task data that entry.S needs immediate access to + * - this struct should fit entirely inside of one cache line + * - this struct shares the supervisor stack pages + * - if the contents of this structure are changed, the assembly constants must also be changed + */ +#ifndef __ASSEMBLY__ + +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + unsigned long status; /* thread-synchronous flags */ + __u32 cpu; /* current CPU */ + __s32 preempt_count; /* 0 => preemptable, <0 => BUG */ + + + mm_segment_t addr_limit; /* thread address space: + 0-0xBFFFFFFF for user-thead + 0-0xFFFFFFFF for kernel-thread + */ + struct restart_block restart_block; + + unsigned long previous_esp; /* ESP of the previous stack in case + of nested (IRQ) stacks + */ + __u8 supervisor_stack[0]; +}; + +#else /* !__ASSEMBLY__ */ + +#include + +#endif + +#define PREEMPT_ACTIVE 0x10000000 +#ifdef CONFIG_4KSTACKS +#define THREAD_SIZE (4096) +#else +#define THREAD_SIZE (8192) +#endif + +#define STACK_WARN (THREAD_SIZE/8) +/* + * macros/functions for gaining access to the thread information structure + * + * preempt_count needs to be 1 initially, until the scheduler is functional. + */ +#ifndef __ASSEMBLY__ + +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .addr_limit = KERNEL_DS, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + + +/* how to get the thread information struct from C */ +static inline struct thread_info *current_thread_info(void) +{ + struct thread_info *ti; + __asm__("andl %%esp,%0; ":"=r" (ti) : "0" (~(THREAD_SIZE - 1))); + return ti; +} + +/* how to get the current stack pointer from C */ +register unsigned long current_stack_pointer asm("esp") __attribute_used__; + +/* thread information allocation */ +#ifdef CONFIG_DEBUG_STACK_USAGE +#define alloc_thread_info(tsk) \ + ({ \ + struct thread_info *ret; \ + \ + ret = kmalloc(THREAD_SIZE, GFP_KERNEL); \ + if (ret) \ + memset(ret, 0, THREAD_SIZE); \ + ret; \ + }) +#else +#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL) +#endif + +#define free_thread_info(info) kfree(info) +#define get_thread_info(ti) get_task_struct((ti)->task) +#define put_thread_info(ti) put_task_struct((ti)->task) + +#else /* !__ASSEMBLY__ */ + +/* how to get the thread information struct from ASM */ +#define GET_THREAD_INFO(reg) \ + movl $-THREAD_SIZE, reg; \ + andl %esp, reg + +/* use this one if reg already contains %esp */ +#define GET_THREAD_INFO_WITH_ESP(reg) \ + andl $-THREAD_SIZE, reg + +#endif + +/* + * thread information flags + * - these are process state flags that various assembly files may need to access + * - pending work-to-be-done flags are in LSW + * - other flags in MSW + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */ +#define TIF_SIGPENDING 2 /* signal pending */ +#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ +#define TIF_SINGLESTEP 4 /* restore singlestep on return to user mode */ +#define TIF_IRET 5 /* return with iret */ +#define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ +#define TIF_SECCOMP 8 /* secure computing */ +#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ +#define TIF_MEMDIE 17 + +#define _TIF_SYSCALL_TRACE (1< + +/** + * struct timer_ops - used to define a timer source + * + * @name: name of the timer. + * @init: Probes and initializes the timer. Takes clock= override + * string as an argument. Returns 0 on success, anything else + * on failure. + * @mark_offset: called by the timer interrupt. + * @get_offset: called by gettimeofday(). Returns the number of microseconds + * since the last timer interupt. + * @monotonic_clock: returns the number of nanoseconds since the init of the + * timer. + * @delay: delays this many clock cycles. + */ +struct timer_opts { + char* name; + void (*mark_offset)(void); + unsigned long (*get_offset)(void); + unsigned long long (*monotonic_clock)(void); + void (*delay)(unsigned long); +}; + +struct init_timer_opts { + int (*init)(char *override); + struct timer_opts *opts; +}; + +#define TICK_SIZE (tick_nsec / 1000) + +extern struct timer_opts* __init select_timer(void); +extern void clock_fallback(void); +void setup_pit_timer(void); + +/* Modifiers for buggy PIT handling */ + +extern int pit_latch_buggy; + +extern struct timer_opts *cur_timer; +extern int timer_ack; + +/* list of externed timers */ +extern struct timer_opts timer_none; +extern struct timer_opts timer_pit; +extern struct init_timer_opts timer_pit_init; +extern struct init_timer_opts timer_tsc_init; +#ifdef CONFIG_X86_CYCLONE_TIMER +extern struct init_timer_opts timer_cyclone_init; +#endif + +extern unsigned long calibrate_tsc(void); +extern void init_cpu_khz(void); +#ifdef CONFIG_HPET_TIMER +extern struct init_timer_opts timer_hpet_init; +extern unsigned long calibrate_tsc_hpet(unsigned long *tsc_hpet_quotient_ptr); +#endif + +#ifdef CONFIG_X86_PM_TIMER +extern struct init_timer_opts timer_pmtmr_init; +#endif +#endif diff --git a/include/asm-i386/timex.h b/include/asm-i386/timex.h new file mode 100644 index 00000000000..b41e484c344 --- /dev/null +++ b/include/asm-i386/timex.h @@ -0,0 +1,52 @@ +/* + * linux/include/asm-i386/timex.h + * + * i386 architecture timex specifications + */ +#ifndef _ASMi386_TIMEX_H +#define _ASMi386_TIMEX_H + +#include +#include + +#ifdef CONFIG_X86_ELAN +# define CLOCK_TICK_RATE 1189200 /* AMD Elan has different frequency! */ +#else +# define CLOCK_TICK_RATE 1193182 /* Underlying HZ */ +#endif + + +/* + * Standard way to access the cycle counter on i586+ CPUs. + * Currently only used on SMP. + * + * If you really have a SMP machine with i486 chips or older, + * compile for that, and this will just always return zero. + * That's ok, it just means that the nicer scheduling heuristics + * won't work for you. + * + * We only use the low 32 bits, and we'd simply better make sure + * that we reschedule before that wraps. Scheduling at least every + * four billion cycles just basically sounds like a good idea, + * regardless of how fast the machine is. + */ +typedef unsigned long long cycles_t; + +static inline cycles_t get_cycles (void) +{ + unsigned long long ret=0; + +#ifndef CONFIG_X86_TSC + if (!cpu_has_tsc) + return 0; +#endif + +#if defined(CONFIG_X86_GENERIC) || defined(CONFIG_X86_TSC) + rdtscll(ret); +#endif + return ret; +} + +extern unsigned long cpu_khz; + +#endif diff --git a/include/asm-i386/tlb.h b/include/asm-i386/tlb.h new file mode 100644 index 00000000000..c006c5c92be --- /dev/null +++ b/include/asm-i386/tlb.h @@ -0,0 +1,20 @@ +#ifndef _I386_TLB_H +#define _I386_TLB_H + +/* + * x86 doesn't need any special per-pte or + * per-vma handling.. + */ +#define tlb_start_vma(tlb, vma) do { } while (0) +#define tlb_end_vma(tlb, vma) do { } while (0) +#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) + +/* + * .. because we flush the whole mm when it + * fills up. + */ +#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) + +#include + +#endif diff --git a/include/asm-i386/tlbflush.h b/include/asm-i386/tlbflush.h new file mode 100644 index 00000000000..f22fab0cea2 --- /dev/null +++ b/include/asm-i386/tlbflush.h @@ -0,0 +1,147 @@ +#ifndef _I386_TLBFLUSH_H +#define _I386_TLBFLUSH_H + +#include +#include +#include + +#define __flush_tlb() \ + do { \ + unsigned int tmpreg; \ + \ + __asm__ __volatile__( \ + "movl %%cr3, %0; \n" \ + "movl %0, %%cr3; # flush TLB \n" \ + : "=r" (tmpreg) \ + :: "memory"); \ + } while (0) + +/* + * Global pages have to be flushed a bit differently. Not a real + * performance problem because this does not happen often. + */ +#define __flush_tlb_global() \ + do { \ + unsigned int tmpreg; \ + \ + __asm__ __volatile__( \ + "movl %1, %%cr4; # turn off PGE \n" \ + "movl %%cr3, %0; \n" \ + "movl %0, %%cr3; # flush TLB \n" \ + "movl %2, %%cr4; # turn PGE back on \n" \ + : "=&r" (tmpreg) \ + : "r" (mmu_cr4_features & ~X86_CR4_PGE), \ + "r" (mmu_cr4_features) \ + : "memory"); \ + } while (0) + +extern unsigned long pgkern_mask; + +# define __flush_tlb_all() \ + do { \ + if (cpu_has_pge) \ + __flush_tlb_global(); \ + else \ + __flush_tlb(); \ + } while (0) + +#define cpu_has_invlpg (boot_cpu_data.x86 > 3) + +#define __flush_tlb_single(addr) \ + __asm__ __volatile__("invlpg %0": :"m" (*(char *) addr)) + +#ifdef CONFIG_X86_INVLPG +# define __flush_tlb_one(addr) __flush_tlb_single(addr) +#else +# define __flush_tlb_one(addr) \ + do { \ + if (cpu_has_invlpg) \ + __flush_tlb_single(addr); \ + else \ + __flush_tlb(); \ + } while (0) +#endif + +/* + * TLB flushing: + * + * - flush_tlb() flushes the current mm struct TLBs + * - flush_tlb_all() flushes all processes TLBs + * - flush_tlb_mm(mm) flushes the specified mm context TLB's + * - flush_tlb_page(vma, vmaddr) flushes one page + * - flush_tlb_range(vma, start, end) flushes a range of pages + * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages + * - flush_tlb_pgtables(mm, start, end) flushes a range of page tables + * + * ..but the i386 has somewhat limited tlb flushing capabilities, + * and page-granular flushes are available only on i486 and up. + */ + +#ifndef CONFIG_SMP + +#define flush_tlb() __flush_tlb() +#define flush_tlb_all() __flush_tlb_all() +#define local_flush_tlb() __flush_tlb() + +static inline void flush_tlb_mm(struct mm_struct *mm) +{ + if (mm == current->active_mm) + __flush_tlb(); +} + +static inline void flush_tlb_page(struct vm_area_struct *vma, + unsigned long addr) +{ + if (vma->vm_mm == current->active_mm) + __flush_tlb_one(addr); +} + +static inline void flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ + if (vma->vm_mm == current->active_mm) + __flush_tlb(); +} + +#else + +#include + +#define local_flush_tlb() \ + __flush_tlb() + +extern void flush_tlb_all(void); +extern void flush_tlb_current_task(void); +extern void flush_tlb_mm(struct mm_struct *); +extern void flush_tlb_page(struct vm_area_struct *, unsigned long); + +#define flush_tlb() flush_tlb_current_task() + +static inline void flush_tlb_range(struct vm_area_struct * vma, unsigned long start, unsigned long end) +{ + flush_tlb_mm(vma->vm_mm); +} + +#define TLBSTATE_OK 1 +#define TLBSTATE_LAZY 2 + +struct tlb_state +{ + struct mm_struct *active_mm; + int state; + char __cacheline_padding[L1_CACHE_BYTES-8]; +}; +DECLARE_PER_CPU(struct tlb_state, cpu_tlbstate); + + +#endif + +#define flush_tlb_kernel_range(start, end) flush_tlb_all() + +static inline void flush_tlb_pgtables(struct mm_struct *mm, + unsigned long start, unsigned long end) +{ + /* i386 does not keep any page table caches in TLB */ +} + +#endif /* _I386_TLBFLUSH_H */ diff --git a/include/asm-i386/topology.h b/include/asm-i386/topology.h new file mode 100644 index 00000000000..98f9e6850cb --- /dev/null +++ b/include/asm-i386/topology.h @@ -0,0 +1,108 @@ +/* + * linux/include/asm-i386/topology.h + * + * Written by: Matthew Dobson, IBM Corporation + * + * Copyright (C) 2002, IBM Corp. + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to + */ +#ifndef _ASM_I386_TOPOLOGY_H +#define _ASM_I386_TOPOLOGY_H + +#ifdef CONFIG_NUMA + +#include + +#include + +/* Mappings between logical cpu number and node number */ +extern cpumask_t node_2_cpu_mask[]; +extern int cpu_2_node[]; + +/* Returns the number of the node containing CPU 'cpu' */ +static inline int cpu_to_node(int cpu) +{ + return cpu_2_node[cpu]; +} + +/* Returns the number of the node containing Node 'node'. This architecture is flat, + so it is a pretty simple function! */ +#define parent_node(node) (node) + +/* Returns a bitmask of CPUs on Node 'node'. */ +static inline cpumask_t node_to_cpumask(int node) +{ + return node_2_cpu_mask[node]; +} + +/* Returns the number of the first CPU on Node 'node'. */ +static inline int node_to_first_cpu(int node) +{ + cpumask_t mask = node_to_cpumask(node); + return first_cpu(mask); +} + +/* Returns the number of the node containing PCI bus number 'busnr' */ +static inline cpumask_t __pcibus_to_cpumask(int busnr) +{ + return node_to_cpumask(mp_bus_id_to_node[busnr]); +} +#define pcibus_to_cpumask(bus) __pcibus_to_cpumask(bus->number) + +/* sched_domains SD_NODE_INIT for NUMAQ machines */ +#define SD_NODE_INIT (struct sched_domain) { \ + .span = CPU_MASK_NONE, \ + .parent = NULL, \ + .groups = NULL, \ + .min_interval = 8, \ + .max_interval = 32, \ + .busy_factor = 32, \ + .imbalance_pct = 125, \ + .cache_hot_time = (10*1000000), \ + .cache_nice_tries = 1, \ + .per_cpu_gain = 100, \ + .flags = SD_LOAD_BALANCE \ + | SD_BALANCE_EXEC \ + | SD_BALANCE_NEWIDLE \ + | SD_WAKE_IDLE \ + | SD_WAKE_BALANCE, \ + .last_balance = jiffies, \ + .balance_interval = 1, \ + .nr_balance_failed = 0, \ +} + +extern unsigned long node_start_pfn[]; +extern unsigned long node_end_pfn[]; +extern unsigned long node_remap_size[]; + +#define node_has_online_mem(nid) (node_start_pfn[nid] != node_end_pfn[nid]) + +#else /* !CONFIG_NUMA */ +/* + * Other i386 platforms should define their own version of the + * above macros here. + */ + +#include + +#endif /* CONFIG_NUMA */ + +#endif /* _ASM_I386_TOPOLOGY_H */ diff --git a/include/asm-i386/types.h b/include/asm-i386/types.h new file mode 100644 index 00000000000..901b77c42b8 --- /dev/null +++ b/include/asm-i386/types.h @@ -0,0 +1,72 @@ +#ifndef _I386_TYPES_H +#define _I386_TYPES_H + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +/* + * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the + * header files exported to user space + */ + +typedef __signed__ char __s8; +typedef unsigned char __u8; + +typedef __signed__ short __s16; +typedef unsigned short __u16; + +typedef __signed__ int __s32; +typedef unsigned int __u32; + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) +typedef __signed__ long long __s64; +typedef unsigned long long __u64; +#endif + +#endif /* __ASSEMBLY__ */ + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +#define BITS_PER_LONG 32 + +#ifndef __ASSEMBLY__ + +#include + +typedef signed char s8; +typedef unsigned char u8; + +typedef signed short s16; +typedef unsigned short u16; + +typedef signed int s32; +typedef unsigned int u32; + +typedef signed long long s64; +typedef unsigned long long u64; + +/* DMA addresses come in generic and 64-bit flavours. */ + +#ifdef CONFIG_HIGHMEM64G +typedef u64 dma_addr_t; +#else +typedef u32 dma_addr_t; +#endif +typedef u64 dma64_addr_t; + +#ifdef CONFIG_LBD +typedef u64 sector_t; +#define HAVE_SECTOR_T +#endif + +typedef unsigned short kmem_bufctl_t; + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif diff --git a/include/asm-i386/uaccess.h b/include/asm-i386/uaccess.h new file mode 100644 index 00000000000..886867aea94 --- /dev/null +++ b/include/asm-i386/uaccess.h @@ -0,0 +1,539 @@ +#ifndef __i386_UACCESS_H +#define __i386_UACCESS_H + +/* + * User space memory access functions + */ +#include +#include +#include +#include +#include +#include + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +/* + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons, these macros are grossly misnamed. + */ + +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) + + +#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFUL) +#define USER_DS MAKE_MM_SEG(PAGE_OFFSET) + +#define get_ds() (KERNEL_DS) +#define get_fs() (current_thread_info()->addr_limit) +#define set_fs(x) (current_thread_info()->addr_limit = (x)) + +#define segment_eq(a,b) ((a).seg == (b).seg) + +/* + * movsl can be slow when source and dest are not both 8-byte aligned + */ +#ifdef CONFIG_X86_INTEL_USERCOPY +extern struct movsl_mask { + int mask; +} ____cacheline_aligned_in_smp movsl_mask; +#endif + +#define __addr_ok(addr) ((unsigned long __force)(addr) < (current_thread_info()->addr_limit.seg)) + +/* + * Test whether a block of memory is a valid user space address. + * Returns 0 if the range is valid, nonzero otherwise. + * + * This is equivalent to the following test: + * (u33)addr + (u33)size >= (u33)current->addr_limit.seg + * + * This needs 33-bit arithmetic. We have a carry... + */ +#define __range_ok(addr,size) ({ \ + unsigned long flag,sum; \ + __chk_user_ptr(addr); \ + asm("addl %3,%1 ; sbbl %0,%0; cmpl %1,%4; sbbl $0,%0" \ + :"=&r" (flag), "=r" (sum) \ + :"1" (addr),"g" ((int)(size)),"g" (current_thread_info()->addr_limit.seg)); \ + flag; }) + +/** + * access_ok: - Checks if a user space pointer is valid + * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that + * %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe + * to write to a block, it is always safe to read from it. + * @addr: User space pointer to start of block to check + * @size: Size of block to check + * + * Context: User context only. This function may sleep. + * + * Checks if a pointer to a block of memory in user space is valid. + * + * Returns true (nonzero) if the memory block may be valid, false (zero) + * if it is definitely invalid. + * + * Note that, depending on architecture, this function probably just + * checks that the pointer is in the user space range - after calling + * this function, memory access functions may still return -EFAULT. + */ +#define access_ok(type,addr,size) (likely(__range_ok(addr,size) == 0)) + +/** + * verify_area: - Obsolete/deprecated and will go away soon, + * use access_ok() instead. + * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE + * @addr: User space pointer to start of block to check + * @size: Size of block to check + * + * Context: User context only. This function may sleep. + * + * This function has been replaced by access_ok(). + * + * Checks if a pointer to a block of memory in user space is valid. + * + * Returns zero if the memory block may be valid, -EFAULT + * if it is definitely invalid. + * + * See access_ok() for more details. + */ +static inline int __deprecated verify_area(int type, const void __user * addr, unsigned long size) +{ + return access_ok(type,addr,size) ? 0 : -EFAULT; +} + + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +struct exception_table_entry +{ + unsigned long insn, fixup; +}; + +extern int fixup_exception(struct pt_regs *regs); + +/* + * These are the main single-value transfer routines. They automatically + * use the right size if we just have the right pointer type. + * + * This gets kind of ugly. We want to return _two_ values in "get_user()" + * and yet we don't want to do any pointers, because that is too much + * of a performance impact. Thus we have a few rather ugly macros here, + * and hide all the ugliness from the user. + * + * The "__xxx" versions of the user access functions are versions that + * do not verify the address space, that must have been done previously + * with a separate "access_ok()" call (this is used when we do multiple + * accesses to the same area of user memory). + */ + +extern void __get_user_1(void); +extern void __get_user_2(void); +extern void __get_user_4(void); + +#define __get_user_x(size,ret,x,ptr) \ + __asm__ __volatile__("call __get_user_" #size \ + :"=a" (ret),"=d" (x) \ + :"0" (ptr)) + + +/* Careful: we have to cast the result to the type of the pointer for sign reasons */ +/** + * get_user: - Get a simple variable from user space. + * @x: Variable to store result. + * @ptr: Source address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple variable from user space to kernel + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and the result of + * dereferencing @ptr must be assignable to @x without a cast. + * + * Returns zero on success, or -EFAULT on error. + * On error, the variable @x is set to zero. + */ +#define get_user(x,ptr) \ +({ int __ret_gu; \ + unsigned long __val_gu; \ + __chk_user_ptr(ptr); \ + switch(sizeof (*(ptr))) { \ + case 1: __get_user_x(1,__ret_gu,__val_gu,ptr); break; \ + case 2: __get_user_x(2,__ret_gu,__val_gu,ptr); break; \ + case 4: __get_user_x(4,__ret_gu,__val_gu,ptr); break; \ + default: __get_user_x(X,__ret_gu,__val_gu,ptr); break; \ + } \ + (x) = (__typeof__(*(ptr)))__val_gu; \ + __ret_gu; \ +}) + +extern void __put_user_bad(void); + +/* + * Strange magic calling convention: pointer in %ecx, + * value in %eax(:%edx), return value in %eax, no clobbers. + */ +extern void __put_user_1(void); +extern void __put_user_2(void); +extern void __put_user_4(void); +extern void __put_user_8(void); + +#define __put_user_1(x, ptr) __asm__ __volatile__("call __put_user_1":"=a" (__ret_pu):"0" ((typeof(*(ptr)))(x)), "c" (ptr)) +#define __put_user_2(x, ptr) __asm__ __volatile__("call __put_user_2":"=a" (__ret_pu):"0" ((typeof(*(ptr)))(x)), "c" (ptr)) +#define __put_user_4(x, ptr) __asm__ __volatile__("call __put_user_4":"=a" (__ret_pu):"0" ((typeof(*(ptr)))(x)), "c" (ptr)) +#define __put_user_8(x, ptr) __asm__ __volatile__("call __put_user_8":"=a" (__ret_pu):"A" ((typeof(*(ptr)))(x)), "c" (ptr)) +#define __put_user_X(x, ptr) __asm__ __volatile__("call __put_user_X":"=a" (__ret_pu):"c" (ptr)) + +/** + * put_user: - Write a simple value into user space. + * @x: Value to copy to user space. + * @ptr: Destination address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple value from kernel space to user + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and @x must be assignable + * to the result of dereferencing @ptr. + * + * Returns zero on success, or -EFAULT on error. + */ +#ifdef CONFIG_X86_WP_WORKS_OK + +#define put_user(x,ptr) \ +({ int __ret_pu; \ + __chk_user_ptr(ptr); \ + switch(sizeof(*(ptr))) { \ + case 1: __put_user_1(x, ptr); break; \ + case 2: __put_user_2(x, ptr); break; \ + case 4: __put_user_4(x, ptr); break; \ + case 8: __put_user_8(x, ptr); break; \ + default:__put_user_X(x, ptr); break; \ + } \ + __ret_pu; \ +}) + +#else +#define put_user(x,ptr) \ +({ \ + int __ret_pu; \ + __typeof__(*(ptr)) __pus_tmp = x; \ + __ret_pu=0; \ + if(unlikely(__copy_to_user_ll(ptr, &__pus_tmp, \ + sizeof(*(ptr))) != 0)) \ + __ret_pu=-EFAULT; \ + __ret_pu; \ + }) + + +#endif + +/** + * __get_user: - Get a simple variable from user space, with less checking. + * @x: Variable to store result. + * @ptr: Source address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple variable from user space to kernel + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and the result of + * dereferencing @ptr must be assignable to @x without a cast. + * + * Caller must check the pointer with access_ok() before calling this + * function. + * + * Returns zero on success, or -EFAULT on error. + * On error, the variable @x is set to zero. + */ +#define __get_user(x,ptr) \ + __get_user_nocheck((x),(ptr),sizeof(*(ptr))) + + +/** + * __put_user: - Write a simple value into user space, with less checking. + * @x: Value to copy to user space. + * @ptr: Destination address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple value from kernel space to user + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and @x must be assignable + * to the result of dereferencing @ptr. + * + * Caller must check the pointer with access_ok() before calling this + * function. + * + * Returns zero on success, or -EFAULT on error. + */ +#define __put_user(x,ptr) \ + __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) + +#define __put_user_nocheck(x,ptr,size) \ +({ \ + long __pu_err; \ + __put_user_size((x),(ptr),(size),__pu_err,-EFAULT); \ + __pu_err; \ +}) + + +#define __put_user_u64(x, addr, err) \ + __asm__ __volatile__( \ + "1: movl %%eax,0(%2)\n" \ + "2: movl %%edx,4(%2)\n" \ + "3:\n" \ + ".section .fixup,\"ax\"\n" \ + "4: movl %3,%0\n" \ + " jmp 3b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .align 4\n" \ + " .long 1b,4b\n" \ + " .long 2b,4b\n" \ + ".previous" \ + : "=r"(err) \ + : "A" (x), "r" (addr), "i"(-EFAULT), "0"(err)) + +#ifdef CONFIG_X86_WP_WORKS_OK + +#define __put_user_size(x,ptr,size,retval,errret) \ +do { \ + retval = 0; \ + __chk_user_ptr(ptr); \ + switch (size) { \ + case 1: __put_user_asm(x,ptr,retval,"b","b","iq",errret);break; \ + case 2: __put_user_asm(x,ptr,retval,"w","w","ir",errret);break; \ + case 4: __put_user_asm(x,ptr,retval,"l","","ir",errret); break; \ + case 8: __put_user_u64((__typeof__(*ptr))(x),ptr,retval); break;\ + default: __put_user_bad(); \ + } \ +} while (0) + +#else + +#define __put_user_size(x,ptr,size,retval,errret) \ +do { \ + __typeof__(*(ptr)) __pus_tmp = x; \ + retval = 0; \ + \ + if(unlikely(__copy_to_user_ll(ptr, &__pus_tmp, size) != 0)) \ + retval = errret; \ +} while (0) + +#endif +struct __large_struct { unsigned long buf[100]; }; +#define __m(x) (*(struct __large_struct __user *)(x)) + +/* + * Tell gcc we read from memory instead of writing: this is because + * we do not write to any memory gcc knows about, so there are no + * aliasing issues. + */ +#define __put_user_asm(x, addr, err, itype, rtype, ltype, errret) \ + __asm__ __volatile__( \ + "1: mov"itype" %"rtype"1,%2\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: movl %3,%0\n" \ + " jmp 2b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .align 4\n" \ + " .long 1b,3b\n" \ + ".previous" \ + : "=r"(err) \ + : ltype (x), "m"(__m(addr)), "i"(errret), "0"(err)) + + +#define __get_user_nocheck(x,ptr,size) \ +({ \ + long __gu_err; \ + unsigned long __gu_val; \ + __get_user_size(__gu_val,(ptr),(size),__gu_err,-EFAULT);\ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +extern long __get_user_bad(void); + +#define __get_user_size(x,ptr,size,retval,errret) \ +do { \ + retval = 0; \ + __chk_user_ptr(ptr); \ + switch (size) { \ + case 1: __get_user_asm(x,ptr,retval,"b","b","=q",errret);break; \ + case 2: __get_user_asm(x,ptr,retval,"w","w","=r",errret);break; \ + case 4: __get_user_asm(x,ptr,retval,"l","","=r",errret);break; \ + default: (x) = __get_user_bad(); \ + } \ +} while (0) + +#define __get_user_asm(x, addr, err, itype, rtype, ltype, errret) \ + __asm__ __volatile__( \ + "1: mov"itype" %2,%"rtype"1\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: movl %3,%0\n" \ + " xor"itype" %"rtype"1,%"rtype"1\n" \ + " jmp 2b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .align 4\n" \ + " .long 1b,3b\n" \ + ".previous" \ + : "=r"(err), ltype (x) \ + : "m"(__m(addr)), "i"(errret), "0"(err)) + + +unsigned long __must_check __copy_to_user_ll(void __user *to, + const void *from, unsigned long n); +unsigned long __must_check __copy_from_user_ll(void *to, + const void __user *from, unsigned long n); + +/* + * Here we special-case 1, 2 and 4-byte copy_*_user invocations. On a fault + * we return the initial request size (1, 2 or 4), as copy_*_user should do. + * If a store crosses a page boundary and gets a fault, the x86 will not write + * anything, so this is accurate. + */ + +/** + * __copy_to_user: - Copy a block of data into user space, with less checking. + * @to: Destination address, in user space. + * @from: Source address, in kernel space. + * @n: Number of bytes to copy. + * + * Context: User context only. This function may sleep. + * + * Copy data from kernel space to user space. Caller must check + * the specified block with access_ok() before calling this function. + * + * Returns number of bytes that could not be copied. + * On success, this will be zero. + */ +static inline unsigned long __must_check +__copy_to_user_inatomic(void __user *to, const void *from, unsigned long n) +{ + if (__builtin_constant_p(n)) { + unsigned long ret; + + switch (n) { + case 1: + __put_user_size(*(u8 *)from, (u8 __user *)to, 1, ret, 1); + return ret; + case 2: + __put_user_size(*(u16 *)from, (u16 __user *)to, 2, ret, 2); + return ret; + case 4: + __put_user_size(*(u32 *)from, (u32 __user *)to, 4, ret, 4); + return ret; + } + } + return __copy_to_user_ll(to, from, n); +} + +static inline unsigned long __must_check +__copy_to_user(void __user *to, const void *from, unsigned long n) +{ + might_sleep(); + return __copy_to_user_inatomic(to, from, n); +} + +/** + * __copy_from_user: - Copy a block of data from user space, with less checking. + * @to: Destination address, in kernel space. + * @from: Source address, in user space. + * @n: Number of bytes to copy. + * + * Context: User context only. This function may sleep. + * + * Copy data from user space to kernel space. Caller must check + * the specified block with access_ok() before calling this function. + * + * Returns number of bytes that could not be copied. + * On success, this will be zero. + * + * If some data could not be copied, this function will pad the copied + * data to the requested size using zero bytes. + */ +static inline unsigned long +__copy_from_user_inatomic(void *to, const void __user *from, unsigned long n) +{ + if (__builtin_constant_p(n)) { + unsigned long ret; + + switch (n) { + case 1: + __get_user_size(*(u8 *)to, from, 1, ret, 1); + return ret; + case 2: + __get_user_size(*(u16 *)to, from, 2, ret, 2); + return ret; + case 4: + __get_user_size(*(u32 *)to, from, 4, ret, 4); + return ret; + } + } + return __copy_from_user_ll(to, from, n); +} + +static inline unsigned long +__copy_from_user(void *to, const void __user *from, unsigned long n) +{ + might_sleep(); + return __copy_from_user_inatomic(to, from, n); +} +unsigned long __must_check copy_to_user(void __user *to, + const void *from, unsigned long n); +unsigned long __must_check copy_from_user(void *to, + const void __user *from, unsigned long n); +long __must_check strncpy_from_user(char *dst, const char __user *src, + long count); +long __must_check __strncpy_from_user(char *dst, + const char __user *src, long count); + +/** + * strlen_user: - Get the size of a string in user space. + * @str: The string to measure. + * + * Context: User context only. This function may sleep. + * + * Get the size of a NUL-terminated string in user space. + * + * Returns the size of the string INCLUDING the terminating NUL. + * On exception, returns 0. + * + * If there is a limit on the length of a valid string, you may wish to + * consider using strnlen_user() instead. + */ +#define strlen_user(str) strnlen_user(str, ~0UL >> 1) + +long strnlen_user(const char __user *str, long n); +unsigned long __must_check clear_user(void __user *mem, unsigned long len); +unsigned long __must_check __clear_user(void __user *mem, unsigned long len); + +#endif /* __i386_UACCESS_H */ diff --git a/include/asm-i386/ucontext.h b/include/asm-i386/ucontext.h new file mode 100644 index 00000000000..b0db36925f5 --- /dev/null +++ b/include/asm-i386/ucontext.h @@ -0,0 +1,12 @@ +#ifndef _ASMi386_UCONTEXT_H +#define _ASMi386_UCONTEXT_H + +struct ucontext { + unsigned long uc_flags; + struct ucontext *uc_link; + stack_t uc_stack; + struct sigcontext uc_mcontext; + sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +#endif /* !_ASMi386_UCONTEXT_H */ diff --git a/include/asm-i386/unaligned.h b/include/asm-i386/unaligned.h new file mode 100644 index 00000000000..7acd7957621 --- /dev/null +++ b/include/asm-i386/unaligned.h @@ -0,0 +1,37 @@ +#ifndef __I386_UNALIGNED_H +#define __I386_UNALIGNED_H + +/* + * The i386 can do unaligned accesses itself. + * + * The strange macros are there to make sure these can't + * be misused in a way that makes them not work on other + * architectures where unaligned accesses aren't as simple. + */ + +/** + * get_unaligned - get value from possibly mis-aligned location + * @ptr: pointer to value + * + * This macro should be used for accessing values larger in size than + * single bytes at locations that are expected to be improperly aligned, + * e.g. retrieving a u16 value from a location not u16-aligned. + * + * Note that unaligned accesses can be very expensive on some architectures. + */ +#define get_unaligned(ptr) (*(ptr)) + +/** + * put_unaligned - put value to a possibly mis-aligned location + * @val: value to place + * @ptr: pointer to location + * + * This macro should be used for placing values larger in size than + * single bytes at locations that are expected to be improperly aligned, + * e.g. writing a u16 value to a location not u16-aligned. + * + * Note that unaligned accesses can be very expensive on some architectures. + */ +#define put_unaligned(val, ptr) ((void)( *(ptr) = (val) )) + +#endif diff --git a/include/asm-i386/unistd.h b/include/asm-i386/unistd.h new file mode 100644 index 00000000000..61bcc1b1e3f --- /dev/null +++ b/include/asm-i386/unistd.h @@ -0,0 +1,466 @@ +#ifndef _ASM_I386_UNISTD_H_ +#define _ASM_I386_UNISTD_H_ + +/* + * This file contains the system call numbers. + */ + +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_lchown 16 +#define __NR_break 17 +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 +#define __NR_stty 31 +#define __NR_gtty 32 +#define __NR_access 33 +#define __NR_nice 34 +#define __NR_ftime 35 +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +#define __NR_prof 44 +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 +#define __NR_lock 53 +#define __NR_ioctl 54 +#define __NR_fcntl 55 +#define __NR_mpx 56 +#define __NR_setpgid 57 +#define __NR_ulimit 58 +#define __NR_oldolduname 59 +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_select 82 +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +#define __NR_profil 98 +#define __NR_statfs 99 +#define __NR_fstatfs 100 +#define __NR_ioperm 101 +#define __NR_socketcall 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +#define __NR_olduname 109 +#define __NR_iopl 110 +#define __NR_vhangup 111 +#define __NR_idle 112 +#define __NR_vm86old 113 +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_modify_ldt 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 +#define __NR_create_module 127 +#define __NR_init_module 128 +#define __NR_delete_module 129 +#define __NR_get_kernel_syms 130 +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 +#define __NR_vm86 166 +#define __NR_query_module 167 +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +#define __NR_chown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 +#define __NR_getpmsg 188 /* some people actually want streams */ +#define __NR_putpmsg 189 /* some people actually want streams */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_lchown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_chown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +#define __NR_mincore 218 +#define __NR_madvise 219 +#define __NR_madvise1 219 /* delete when C lib stub is removed */ +#define __NR_getdents64 220 +#define __NR_fcntl64 221 +/* 223 is unused */ +#define __NR_gettid 224 +#define __NR_readahead 225 +#define __NR_setxattr 226 +#define __NR_lsetxattr 227 +#define __NR_fsetxattr 228 +#define __NR_getxattr 229 +#define __NR_lgetxattr 230 +#define __NR_fgetxattr 231 +#define __NR_listxattr 232 +#define __NR_llistxattr 233 +#define __NR_flistxattr 234 +#define __NR_removexattr 235 +#define __NR_lremovexattr 236 +#define __NR_fremovexattr 237 +#define __NR_tkill 238 +#define __NR_sendfile64 239 +#define __NR_futex 240 +#define __NR_sched_setaffinity 241 +#define __NR_sched_getaffinity 242 +#define __NR_set_thread_area 243 +#define __NR_get_thread_area 244 +#define __NR_io_setup 245 +#define __NR_io_destroy 246 +#define __NR_io_getevents 247 +#define __NR_io_submit 248 +#define __NR_io_cancel 249 +#define __NR_fadvise64 250 + +#define __NR_exit_group 252 +#define __NR_lookup_dcookie 253 +#define __NR_epoll_create 254 +#define __NR_epoll_ctl 255 +#define __NR_epoll_wait 256 +#define __NR_remap_file_pages 257 +#define __NR_set_tid_address 258 +#define __NR_timer_create 259 +#define __NR_timer_settime (__NR_timer_create+1) +#define __NR_timer_gettime (__NR_timer_create+2) +#define __NR_timer_getoverrun (__NR_timer_create+3) +#define __NR_timer_delete (__NR_timer_create+4) +#define __NR_clock_settime (__NR_timer_create+5) +#define __NR_clock_gettime (__NR_timer_create+6) +#define __NR_clock_getres (__NR_timer_create+7) +#define __NR_clock_nanosleep (__NR_timer_create+8) +#define __NR_statfs64 268 +#define __NR_fstatfs64 269 +#define __NR_tgkill 270 +#define __NR_utimes 271 +#define __NR_fadvise64_64 272 +#define __NR_vserver 273 +#define __NR_mbind 274 +#define __NR_get_mempolicy 275 +#define __NR_set_mempolicy 276 +#define __NR_mq_open 277 +#define __NR_mq_unlink (__NR_mq_open+1) +#define __NR_mq_timedsend (__NR_mq_open+2) +#define __NR_mq_timedreceive (__NR_mq_open+3) +#define __NR_mq_notify (__NR_mq_open+4) +#define __NR_mq_getsetattr (__NR_mq_open+5) +#define __NR_sys_kexec_load 283 +#define __NR_waitid 284 +/* #define __NR_sys_setaltroot 285 */ +#define __NR_add_key 286 +#define __NR_request_key 287 +#define __NR_keyctl 288 + +#define NR_syscalls 289 + +/* + * user-visible error numbers are in the range -1 - -128: see + * + */ +#define __syscall_return(type, res) \ +do { \ + if ((unsigned long)(res) >= (unsigned long)(-(128 + 1))) { \ + errno = -(res); \ + res = -1; \ + } \ + return (type) (res); \ +} while (0) + +/* XXX - _foo needs to be __foo, while __NR_bar could be _NR_bar. */ +#define _syscall0(type,name) \ +type name(void) \ +{ \ +long __res; \ +__asm__ volatile ("int $0x80" \ + : "=a" (__res) \ + : "0" (__NR_##name)); \ +__syscall_return(type,__res); \ +} + +#define _syscall1(type,name,type1,arg1) \ +type name(type1 arg1) \ +{ \ +long __res; \ +__asm__ volatile ("int $0x80" \ + : "=a" (__res) \ + : "0" (__NR_##name),"b" ((long)(arg1))); \ +__syscall_return(type,__res); \ +} + +#define _syscall2(type,name,type1,arg1,type2,arg2) \ +type name(type1 arg1,type2 arg2) \ +{ \ +long __res; \ +__asm__ volatile ("int $0x80" \ + : "=a" (__res) \ + : "0" (__NR_##name),"b" ((long)(arg1)),"c" ((long)(arg2))); \ +__syscall_return(type,__res); \ +} + +#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \ +type name(type1 arg1,type2 arg2,type3 arg3) \ +{ \ +long __res; \ +__asm__ volatile ("int $0x80" \ + : "=a" (__res) \ + : "0" (__NR_##name),"b" ((long)(arg1)),"c" ((long)(arg2)), \ + "d" ((long)(arg3))); \ +__syscall_return(type,__res); \ +} + +#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \ +type name (type1 arg1, type2 arg2, type3 arg3, type4 arg4) \ +{ \ +long __res; \ +__asm__ volatile ("int $0x80" \ + : "=a" (__res) \ + : "0" (__NR_##name),"b" ((long)(arg1)),"c" ((long)(arg2)), \ + "d" ((long)(arg3)),"S" ((long)(arg4))); \ +__syscall_return(type,__res); \ +} + +#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \ + type5,arg5) \ +type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5) \ +{ \ +long __res; \ +__asm__ volatile ("int $0x80" \ + : "=a" (__res) \ + : "0" (__NR_##name),"b" ((long)(arg1)),"c" ((long)(arg2)), \ + "d" ((long)(arg3)),"S" ((long)(arg4)),"D" ((long)(arg5))); \ +__syscall_return(type,__res); \ +} + +#define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \ + type5,arg5,type6,arg6) \ +type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5,type6 arg6) \ +{ \ +long __res; \ +__asm__ volatile ("push %%ebp ; movl %%eax,%%ebp ; movl %1,%%eax ; int $0x80 ; pop %%ebp" \ + : "=a" (__res) \ + : "i" (__NR_##name),"b" ((long)(arg1)),"c" ((long)(arg2)), \ + "d" ((long)(arg3)),"S" ((long)(arg4)),"D" ((long)(arg5)), \ + "0" ((long)(arg6))); \ +__syscall_return(type,__res); \ +} + +#ifdef __KERNEL__ +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_OLD_STAT +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_SIGNAL +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION +#endif + +#ifdef __KERNEL_SYSCALLS__ + +#include +#include +#include +#include + +/* + * we need this inline - forking from kernel space will result + * in NO COPY ON WRITE (!!!), until an execve is executed. This + * is no problem, but for the stack. This is handled by not letting + * main() use the stack at all after fork(). Thus, no function + * calls - which means inline code for fork too, as otherwise we + * would use the stack upon exit from 'fork()'. + * + * Actually only pause and fork are needed inline, so that there + * won't be any messing with the stack from main(), but we define + * some others too. + */ +static inline _syscall3(int,execve,const char *,file,char **,argv,char **,envp) + +asmlinkage int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount); +asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, + unsigned long prot, unsigned long flags, + unsigned long fd, unsigned long pgoff); +asmlinkage int sys_execve(struct pt_regs regs); +asmlinkage int sys_clone(struct pt_regs regs); +asmlinkage int sys_fork(struct pt_regs regs); +asmlinkage int sys_vfork(struct pt_regs regs); +asmlinkage int sys_pipe(unsigned long __user *fildes); +asmlinkage int sys_ptrace(long request, long pid, long addr, long data); +asmlinkage long sys_iopl(unsigned long unused); +struct sigaction; +asmlinkage long sys_rt_sigaction(int sig, + const struct sigaction __user *act, + struct sigaction __user *oact, + size_t sigsetsize); + +#endif + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#ifndef cond_syscall +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") +#endif + +#endif /* _ASM_I386_UNISTD_H_ */ diff --git a/include/asm-i386/user.h b/include/asm-i386/user.h new file mode 100644 index 00000000000..0e85d2a5e33 --- /dev/null +++ b/include/asm-i386/user.h @@ -0,0 +1,121 @@ +#ifndef _I386_USER_H +#define _I386_USER_H + +#include +/* Core file format: The core file is written in such a way that gdb + can understand it and provide useful information to the user (under + linux we use the 'trad-core' bfd). There are quite a number of + obstacles to being able to view the contents of the floating point + registers, and until these are solved you will not be able to view the + contents of them. Actually, you can read in the core file and look at + the contents of the user struct to find out what the floating point + registers contain. + The actual file contents are as follows: + UPAGE: 1 page consisting of a user struct that tells gdb what is present + in the file. Directly after this is a copy of the task_struct, which + is currently not used by gdb, but it may come in useful at some point. + All of the registers are stored as part of the upage. The upage should + always be only one page. + DATA: The data area is stored. We use current->end_text to + current->brk to pick up all of the user variables, plus any memory + that may have been malloced. No attempt is made to determine if a page + is demand-zero or if a page is totally unused, we just cover the entire + range. All of the addresses are rounded in such a way that an integral + number of pages is written. + STACK: We need the stack information in order to get a meaningful + backtrace. We need to write the data from (esp) to + current->start_stack, so we round each of these off in order to be able + to write an integer number of pages. + The minimum core file size is 3 pages, or 12288 bytes. +*/ + +/* + * Pentium III FXSR, SSE support + * Gareth Hughes , May 2000 + * + * Provide support for the GDB 5.0+ PTRACE_{GET|SET}FPXREGS requests for + * interacting with the FXSR-format floating point environment. Floating + * point data can be accessed in the regular format in the usual manner, + * and both the standard and SIMD floating point data can be accessed via + * the new ptrace requests. In either case, changes to the FPU environment + * will be reflected in the task's state as expected. + */ + +struct user_i387_struct { + long cwd; + long swd; + long twd; + long fip; + long fcs; + long foo; + long fos; + long st_space[20]; /* 8*10 bytes for each FP-reg = 80 bytes */ +}; + +struct user_fxsr_struct { + unsigned short cwd; + unsigned short swd; + unsigned short twd; + unsigned short fop; + long fip; + long fcs; + long foo; + long fos; + long mxcsr; + long reserved; + long st_space[32]; /* 8*16 bytes for each FP-reg = 128 bytes */ + long xmm_space[32]; /* 8*16 bytes for each XMM-reg = 128 bytes */ + long padding[56]; +}; + +/* + * This is the old layout of "struct pt_regs", and + * is still the layout used by user mode (the new + * pt_regs doesn't have all registers as the kernel + * doesn't use the extra segment registers) + */ +struct user_regs_struct { + long ebx, ecx, edx, esi, edi, ebp, eax; + unsigned short ds, __ds, es, __es; + unsigned short fs, __fs, gs, __gs; + long orig_eax, eip; + unsigned short cs, __cs; + long eflags, esp; + unsigned short ss, __ss; +}; + +/* When the kernel dumps core, it starts by dumping the user struct - + this will be used by gdb to figure out where the data and stack segments + are within the file, and what virtual addresses to use. */ +struct user{ +/* We start with the registers, to mimic the way that "memory" is returned + from the ptrace(3,...) function. */ + struct user_regs_struct regs; /* Where the registers are actually stored */ +/* ptrace does not yet supply these. Someday.... */ + int u_fpvalid; /* True if math co-processor being used. */ + /* for this mess. Not yet used. */ + struct user_i387_struct i387; /* Math Co-processor registers. */ +/* The rest of this junk is to help gdb figure out what goes where */ + unsigned long int u_tsize; /* Text segment size (pages). */ + unsigned long int u_dsize; /* Data segment size (pages). */ + unsigned long int u_ssize; /* Stack segment size (pages). */ + unsigned long start_code; /* Starting virtual address of text. */ + unsigned long start_stack; /* Starting virtual address of stack area. + This is actually the bottom of the stack, + the top of the stack is always found in the + esp register. */ + long int signal; /* Signal that caused the core dump. */ + int reserved; /* No longer used */ + struct user_pt_regs * u_ar0; /* Used by gdb to help find the values for */ + /* the registers. */ + struct user_i387_struct* u_fpstate; /* Math Co-processor pointer. */ + unsigned long magic; /* To uniquely identify a core file */ + char u_comm[32]; /* User command that was responsible */ + int u_debugreg[8]; +}; +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) + +#endif /* _I386_USER_H */ diff --git a/include/asm-i386/vga.h b/include/asm-i386/vga.h new file mode 100644 index 00000000000..ef0c0e50cc9 --- /dev/null +++ b/include/asm-i386/vga.h @@ -0,0 +1,20 @@ +/* + * Access to VGA videoram + * + * (c) 1998 Martin Mares + */ + +#ifndef _LINUX_ASM_VGA_H_ +#define _LINUX_ASM_VGA_H_ + +/* + * On the PC, we can just recalculate addresses and then + * access the videoram directly without any black magic. + */ + +#define VGA_MAP_MEM(x) (unsigned long)phys_to_virt(x) + +#define vga_readb(x) (*(x)) +#define vga_writeb(x,y) (*(y) = (x)) + +#endif diff --git a/include/asm-i386/vic.h b/include/asm-i386/vic.h new file mode 100644 index 00000000000..4abfcfb91eb --- /dev/null +++ b/include/asm-i386/vic.h @@ -0,0 +1,61 @@ +/* Copyright (C) 1999,2001 + * + * Author: J.E.J.Bottomley@HansenPartnership.com + * + * Standard include definitions for the NCR Voyager Interrupt Controller */ + +/* The eight CPI vectors. To activate a CPI, you write a bit mask + * corresponding to the processor set to be interrupted into the + * relevant register. That set of CPUs will then be interrupted with + * the CPI */ +static const int VIC_CPI_Registers[] = + {0xFC00, 0xFC01, 0xFC08, 0xFC09, + 0xFC10, 0xFC11, 0xFC18, 0xFC19 }; + +#define VIC_PROC_WHO_AM_I 0xfc29 +# define QUAD_IDENTIFIER 0xC0 +# define EIGHT_SLOT_IDENTIFIER 0xE0 +#define QIC_EXTENDED_PROCESSOR_SELECT 0xFC72 +#define VIC_CPI_BASE_REGISTER 0xFC41 +#define VIC_PROCESSOR_ID 0xFC21 +# define VIC_CPU_MASQUERADE_ENABLE 0x8 + +#define VIC_CLAIM_REGISTER_0 0xFC38 +#define VIC_CLAIM_REGISTER_1 0xFC39 +#define VIC_REDIRECT_REGISTER_0 0xFC60 +#define VIC_REDIRECT_REGISTER_1 0xFC61 +#define VIC_PRIORITY_REGISTER 0xFC20 + +#define VIC_PRIMARY_MC_BASE 0xFC48 +#define VIC_SECONDARY_MC_BASE 0xFC49 + +#define QIC_PROCESSOR_ID 0xFC71 +# define QIC_CPUID_ENABLE 0x08 + +#define QIC_VIC_CPI_BASE_REGISTER 0xFC79 +#define QIC_CPI_BASE_REGISTER 0xFC7A + +#define QIC_MASK_REGISTER0 0xFC80 +/* NOTE: these are masked high, enabled low */ +# define QIC_PERF_TIMER 0x01 +# define QIC_LPE 0x02 +# define QIC_SYS_INT 0x04 +# define QIC_CMN_INT 0x08 +/* at the moment, just enable CMN_INT, disable SYS_INT */ +# define QIC_DEFAULT_MASK0 (~(QIC_CMN_INT /* | VIC_SYS_INT */)) +#define QIC_MASK_REGISTER1 0xFC81 +# define QIC_BOOT_CPI_MASK 0xFE +/* Enable CPI's 1-6 inclusive */ +# define QIC_CPI_ENABLE 0x81 + +#define QIC_INTERRUPT_CLEAR0 0xFC8A +#define QIC_INTERRUPT_CLEAR1 0xFC8B + +/* this is where we place the CPI vectors */ +#define VIC_DEFAULT_CPI_BASE 0xC0 +/* this is where we place the QIC CPI vectors */ +#define QIC_DEFAULT_CPI_BASE 0xD0 + +#define VIC_BOOT_INTERRUPT_MASK 0xfe + +extern void smp_vic_timer_interrupt(struct pt_regs *regs); diff --git a/include/asm-i386/vm86.h b/include/asm-i386/vm86.h new file mode 100644 index 00000000000..40ec82c6914 --- /dev/null +++ b/include/asm-i386/vm86.h @@ -0,0 +1,208 @@ +#ifndef _LINUX_VM86_H +#define _LINUX_VM86_H + +/* + * I'm guessing at the VIF/VIP flag usage, but hope that this is how + * the Pentium uses them. Linux will return from vm86 mode when both + * VIF and VIP is set. + * + * On a Pentium, we could probably optimize the virtual flags directly + * in the eflags register instead of doing it "by hand" in vflags... + * + * Linus + */ + +#define TF_MASK 0x00000100 +#define IF_MASK 0x00000200 +#define IOPL_MASK 0x00003000 +#define NT_MASK 0x00004000 +#define VM_MASK 0x00020000 +#define AC_MASK 0x00040000 +#define VIF_MASK 0x00080000 /* virtual interrupt flag */ +#define VIP_MASK 0x00100000 /* virtual interrupt pending */ +#define ID_MASK 0x00200000 + +#define BIOSSEG 0x0f000 + +#define CPU_086 0 +#define CPU_186 1 +#define CPU_286 2 +#define CPU_386 3 +#define CPU_486 4 +#define CPU_586 5 + +/* + * Return values for the 'vm86()' system call + */ +#define VM86_TYPE(retval) ((retval) & 0xff) +#define VM86_ARG(retval) ((retval) >> 8) + +#define VM86_SIGNAL 0 /* return due to signal */ +#define VM86_UNKNOWN 1 /* unhandled GP fault - IO-instruction or similar */ +#define VM86_INTx 2 /* int3/int x instruction (ARG = x) */ +#define VM86_STI 3 /* sti/popf/iret instruction enabled virtual interrupts */ + +/* + * Additional return values when invoking new vm86() + */ +#define VM86_PICRETURN 4 /* return due to pending PIC request */ +#define VM86_TRAP 6 /* return due to DOS-debugger request */ + +/* + * function codes when invoking new vm86() + */ +#define VM86_PLUS_INSTALL_CHECK 0 +#define VM86_ENTER 1 +#define VM86_ENTER_NO_BYPASS 2 +#define VM86_REQUEST_IRQ 3 +#define VM86_FREE_IRQ 4 +#define VM86_GET_IRQ_BITS 5 +#define VM86_GET_AND_RESET_IRQ 6 + +/* + * This is the stack-layout seen by the user space program when we have + * done a translation of "SAVE_ALL" from vm86 mode. The real kernel layout + * is 'kernel_vm86_regs' (see below). + */ + +struct vm86_regs { +/* + * normal regs, with special meaning for the segment descriptors.. + */ + long ebx; + long ecx; + long edx; + long esi; + long edi; + long ebp; + long eax; + long __null_ds; + long __null_es; + long __null_fs; + long __null_gs; + long orig_eax; + long eip; + unsigned short cs, __csh; + long eflags; + long esp; + unsigned short ss, __ssh; +/* + * these are specific to v86 mode: + */ + unsigned short es, __esh; + unsigned short ds, __dsh; + unsigned short fs, __fsh; + unsigned short gs, __gsh; +}; + +struct revectored_struct { + unsigned long __map[8]; /* 256 bits */ +}; + +struct vm86_struct { + struct vm86_regs regs; + unsigned long flags; + unsigned long screen_bitmap; + unsigned long cpu_type; + struct revectored_struct int_revectored; + struct revectored_struct int21_revectored; +}; + +/* + * flags masks + */ +#define VM86_SCREEN_BITMAP 0x0001 + +struct vm86plus_info_struct { + unsigned long force_return_for_pic:1; + unsigned long vm86dbg_active:1; /* for debugger */ + unsigned long vm86dbg_TFpendig:1; /* for debugger */ + unsigned long unused:28; + unsigned long is_vm86pus:1; /* for vm86 internal use */ + unsigned char vm86dbg_intxxtab[32]; /* for debugger */ +}; + +struct vm86plus_struct { + struct vm86_regs regs; + unsigned long flags; + unsigned long screen_bitmap; + unsigned long cpu_type; + struct revectored_struct int_revectored; + struct revectored_struct int21_revectored; + struct vm86plus_info_struct vm86plus; +}; + +#ifdef __KERNEL__ +/* + * This is the (kernel) stack-layout when we have done a "SAVE_ALL" from vm86 + * mode - the main change is that the old segment descriptors aren't + * useful any more and are forced to be zero by the kernel (and the + * hardware when a trap occurs), and the real segment descriptors are + * at the end of the structure. Look at ptrace.h to see the "normal" + * setup. For user space layout see 'struct vm86_regs' above. + */ + +struct kernel_vm86_regs { +/* + * normal regs, with special meaning for the segment descriptors.. + */ + long ebx; + long ecx; + long edx; + long esi; + long edi; + long ebp; + long eax; + long __null_ds; + long __null_es; + long orig_eax; + long eip; + unsigned short cs, __csh; + long eflags; + long esp; + unsigned short ss, __ssh; +/* + * these are specific to v86 mode: + */ + unsigned short es, __esh; + unsigned short ds, __dsh; + unsigned short fs, __fsh; + unsigned short gs, __gsh; +}; + +struct kernel_vm86_struct { + struct kernel_vm86_regs regs; +/* + * the below part remains on the kernel stack while we are in VM86 mode. + * 'tss.esp0' then contains the address of VM86_TSS_ESP0 below, and when we + * get forced back from VM86, the CPU and "SAVE_ALL" will restore the above + * 'struct kernel_vm86_regs' with the then actual values. + * Therefore, pt_regs in fact points to a complete 'kernel_vm86_struct' + * in kernelspace, hence we need not reget the data from userspace. + */ +#define VM86_TSS_ESP0 flags + unsigned long flags; + unsigned long screen_bitmap; + unsigned long cpu_type; + struct revectored_struct int_revectored; + struct revectored_struct int21_revectored; + struct vm86plus_info_struct vm86plus; + struct pt_regs *regs32; /* here we save the pointer to the old regs */ +/* + * The below is not part of the structure, but the stack layout continues + * this way. In front of 'return-eip' may be some data, depending on + * compilation, so we don't rely on this and save the pointer to 'oldregs' + * in 'regs32' above. + * However, with GCC-2.7.2 and the current CFLAGS you see exactly this: + + long return-eip; from call to vm86() + struct pt_regs oldregs; user space registers as saved by syscall + */ +}; + +void handle_vm86_fault(struct kernel_vm86_regs *, long); +int handle_vm86_trap(struct kernel_vm86_regs *, long, int); + +#endif /* __KERNEL__ */ + +#endif diff --git a/include/asm-i386/voyager.h b/include/asm-i386/voyager.h new file mode 100644 index 00000000000..aaf432dd767 --- /dev/null +++ b/include/asm-i386/voyager.h @@ -0,0 +1,521 @@ +/* Copyright (C) 1999,2001 + * + * Author: J.E.J.Bottomley@HansenPartnership.com + * + * Standard include definitions for the NCR Voyager system */ + +#undef VOYAGER_DEBUG +#undef VOYAGER_CAT_DEBUG + +#ifdef VOYAGER_DEBUG +#define VDEBUG(x) printk x +#else +#define VDEBUG(x) +#endif + +/* There are three levels of voyager machine: 3,4 and 5. The rule is + * if it's less than 3435 it's a Level 3 except for a 3360 which is + * a level 4. A 3435 or above is a Level 5 */ +#define VOYAGER_LEVEL5_AND_ABOVE 0x3435 +#define VOYAGER_LEVEL4 0x3360 + +/* The L4 DINO ASIC */ +#define VOYAGER_DINO 0x43 + +/* voyager ports in standard I/O space */ +#define VOYAGER_MC_SETUP 0x96 + + +#define VOYAGER_CAT_CONFIG_PORT 0x97 +# define VOYAGER_CAT_DESELECT 0xff +#define VOYAGER_SSPB_RELOCATION_PORT 0x98 + +/* Valid CAT controller commands */ +/* start instruction register cycle */ +#define VOYAGER_CAT_IRCYC 0x01 +/* start data register cycle */ +#define VOYAGER_CAT_DRCYC 0x02 +/* move to execute state */ +#define VOYAGER_CAT_RUN 0x0F +/* end operation */ +#define VOYAGER_CAT_END 0x80 +/* hold in idle state */ +#define VOYAGER_CAT_HOLD 0x90 +/* single step an "intest" vector */ +#define VOYAGER_CAT_STEP 0xE0 +/* return cat controller to CLEMSON mode */ +#define VOYAGER_CAT_CLEMSON 0xFF + +/* the default cat command header */ +#define VOYAGER_CAT_HEADER 0x7F + +/* the range of possible CAT module ids in the system */ +#define VOYAGER_MIN_MODULE 0x10 +#define VOYAGER_MAX_MODULE 0x1f + +/* The voyager registers per asic */ +#define VOYAGER_ASIC_ID_REG 0x00 +#define VOYAGER_ASIC_TYPE_REG 0x01 +/* the sub address registers can be made auto incrementing on reads */ +#define VOYAGER_AUTO_INC_REG 0x02 +# define VOYAGER_AUTO_INC 0x04 +# define VOYAGER_NO_AUTO_INC 0xfb +#define VOYAGER_SUBADDRDATA 0x03 +#define VOYAGER_SCANPATH 0x05 +# define VOYAGER_CONNECT_ASIC 0x01 +# define VOYAGER_DISCONNECT_ASIC 0xfe +#define VOYAGER_SUBADDRLO 0x06 +#define VOYAGER_SUBADDRHI 0x07 +#define VOYAGER_SUBMODSELECT 0x08 +#define VOYAGER_SUBMODPRESENT 0x09 + +#define VOYAGER_SUBADDR_LO 0xff +#define VOYAGER_SUBADDR_HI 0xffff + +/* the maximum size of a scan path -- used to form instructions */ +#define VOYAGER_MAX_SCAN_PATH 0x100 +/* the biggest possible register size (in bytes) */ +#define VOYAGER_MAX_REG_SIZE 4 + +/* Total number of possible modules (including submodules) */ +#define VOYAGER_MAX_MODULES 16 +/* Largest number of asics per module */ +#define VOYAGER_MAX_ASICS_PER_MODULE 7 + +/* the CAT asic of each module is always the first one */ +#define VOYAGER_CAT_ID 0 +#define VOYAGER_PSI 0x1a + +/* voyager instruction operations and registers */ +#define VOYAGER_READ_CONFIG 0x1 +#define VOYAGER_WRITE_CONFIG 0x2 +#define VOYAGER_BYPASS 0xff + +typedef struct voyager_asic +{ + __u8 asic_addr; /* ASIC address; Level 4 */ + __u8 asic_type; /* ASIC type */ + __u8 asic_id; /* ASIC id */ + __u8 jtag_id[4]; /* JTAG id */ + __u8 asic_location; /* Location within scan path; start w/ 0 */ + __u8 bit_location; /* Location within bit stream; start w/ 0 */ + __u8 ireg_length; /* Instruction register length */ + __u16 subaddr; /* Amount of sub address space */ + struct voyager_asic *next; /* Next asic in linked list */ +} voyager_asic_t; + +typedef struct voyager_module { + __u8 module_addr; /* Module address */ + __u8 scan_path_connected; /* Scan path connected */ + __u16 ee_size; /* Size of the EEPROM */ + __u16 num_asics; /* Number of Asics */ + __u16 inst_bits; /* Instruction bits in the scan path */ + __u16 largest_reg; /* Largest register in the scan path */ + __u16 smallest_reg; /* Smallest register in the scan path */ + voyager_asic_t *asic; /* First ASIC in scan path (CAT_I) */ + struct voyager_module *submodule; /* Submodule pointer */ + struct voyager_module *next; /* Next module in linked list */ +} voyager_module_t; + +typedef struct voyager_eeprom_hdr { + __u8 module_id[4] __attribute__((packed)); + __u8 version_id __attribute__((packed)); + __u8 config_id __attribute__((packed)); + __u16 boundry_id __attribute__((packed)); /* boundary scan id */ + __u16 ee_size __attribute__((packed)); /* size of EEPROM */ + __u8 assembly[11] __attribute__((packed)); /* assembly # */ + __u8 assembly_rev __attribute__((packed)); /* assembly rev */ + __u8 tracer[4] __attribute__((packed)); /* tracer number */ + __u16 assembly_cksum __attribute__((packed)); /* asm checksum */ + __u16 power_consump __attribute__((packed)); /* pwr requirements */ + __u16 num_asics __attribute__((packed)); /* number of asics */ + __u16 bist_time __attribute__((packed)); /* min. bist time */ + __u16 err_log_offset __attribute__((packed)); /* error log offset */ + __u16 scan_path_offset __attribute__((packed));/* scan path offset */ + __u16 cct_offset __attribute__((packed)); + __u16 log_length __attribute__((packed)); /* length of err log */ + __u16 xsum_end __attribute__((packed)); /* offset to end of + checksum */ + __u8 reserved[4] __attribute__((packed)); + __u8 sflag __attribute__((packed)); /* starting sentinal */ + __u8 part_number[13] __attribute__((packed)); /* prom part number */ + __u8 version[10] __attribute__((packed)); /* version number */ + __u8 signature[8] __attribute__((packed)); + __u16 eeprom_chksum __attribute__((packed)); + __u32 data_stamp_offset __attribute__((packed)); + __u8 eflag __attribute__((packed)); /* ending sentinal */ +} voyager_eprom_hdr_t; + + + +#define VOYAGER_EPROM_SIZE_OFFSET ((__u16)(&(((voyager_eprom_hdr_t *)0)->ee_size))) +#define VOYAGER_XSUM_END_OFFSET 0x2a + +/* the following three definitions are for internal table layouts + * in the module EPROMs. We really only care about the IDs and + * offsets */ +typedef struct voyager_sp_table { + __u8 asic_id __attribute__((packed)); + __u8 bypass_flag __attribute__((packed)); + __u16 asic_data_offset __attribute__((packed)); + __u16 config_data_offset __attribute__((packed)); +} voyager_sp_table_t; + +typedef struct voyager_jtag_table { + __u8 icode[4] __attribute__((packed)); + __u8 runbist[4] __attribute__((packed)); + __u8 intest[4] __attribute__((packed)); + __u8 samp_preld[4] __attribute__((packed)); + __u8 ireg_len __attribute__((packed)); +} voyager_jtt_t; + +typedef struct voyager_asic_data_table { + __u8 jtag_id[4] __attribute__((packed)); + __u16 length_bsr __attribute__((packed)); + __u16 length_bist_reg __attribute__((packed)); + __u32 bist_clk __attribute__((packed)); + __u16 subaddr_bits __attribute__((packed)); + __u16 seed_bits __attribute__((packed)); + __u16 sig_bits __attribute__((packed)); + __u16 jtag_offset __attribute__((packed)); +} voyager_at_t; + +/* Voyager Interrupt Controller (VIC) registers */ + +/* Base to add to Cross Processor Interrupts (CPIs) when triggering + * the CPU IRQ line */ +/* register defines for the WCBICs (one per processor) */ +#define VOYAGER_WCBIC0 0x41 /* bus A node P1 processor 0 */ +#define VOYAGER_WCBIC1 0x49 /* bus A node P1 processor 1 */ +#define VOYAGER_WCBIC2 0x51 /* bus A node P2 processor 0 */ +#define VOYAGER_WCBIC3 0x59 /* bus A node P2 processor 1 */ +#define VOYAGER_WCBIC4 0x61 /* bus B node P1 processor 0 */ +#define VOYAGER_WCBIC5 0x69 /* bus B node P1 processor 1 */ +#define VOYAGER_WCBIC6 0x71 /* bus B node P2 processor 0 */ +#define VOYAGER_WCBIC7 0x79 /* bus B node P2 processor 1 */ + + +/* top of memory registers */ +#define VOYAGER_WCBIC_TOM_L 0x4 +#define VOYAGER_WCBIC_TOM_H 0x5 + +/* register defines for Voyager Memory Contol (VMC) + * these are present on L4 machines only */ +#define VOYAGER_VMC1 0x81 +#define VOYAGER_VMC2 0x91 +#define VOYAGER_VMC3 0xa1 +#define VOYAGER_VMC4 0xb1 + +/* VMC Ports */ +#define VOYAGER_VMC_MEMORY_SETUP 0x9 +# define VMC_Interleaving 0x01 +# define VMC_4Way 0x02 +# define VMC_EvenCacheLines 0x04 +# define VMC_HighLine 0x08 +# define VMC_Start0_Enable 0x20 +# define VMC_Start1_Enable 0x40 +# define VMC_Vremap 0x80 +#define VOYAGER_VMC_BANK_DENSITY 0xa +# define VMC_BANK_EMPTY 0 +# define VMC_BANK_4MB 1 +# define VMC_BANK_16MB 2 +# define VMC_BANK_64MB 3 +# define VMC_BANK0_MASK 0x03 +# define VMC_BANK1_MASK 0x0C +# define VMC_BANK2_MASK 0x30 +# define VMC_BANK3_MASK 0xC0 + +/* Magellan Memory Controller (MMC) defines - present on L5 */ +#define VOYAGER_MMC_ASIC_ID 1 +/* the two memory modules corresponding to memory cards in the system */ +#define VOYAGER_MMC_MEMORY0_MODULE 0x14 +#define VOYAGER_MMC_MEMORY1_MODULE 0x15 +/* the Magellan Memory Address (MMA) defines */ +#define VOYAGER_MMA_ASIC_ID 2 + +/* Submodule number for the Quad Baseboard */ +#define VOYAGER_QUAD_BASEBOARD 1 + +/* ASIC defines for the Quad Baseboard */ +#define VOYAGER_QUAD_QDATA0 1 +#define VOYAGER_QUAD_QDATA1 2 +#define VOYAGER_QUAD_QABC 3 + +/* Useful areas in extended CMOS */ +#define VOYAGER_PROCESSOR_PRESENT_MASK 0x88a +#define VOYAGER_MEMORY_CLICKMAP 0xa23 +#define VOYAGER_DUMP_LOCATION 0xb1a + +/* SUS In Control bit - used to tell SUS that we don't need to be + * babysat anymore */ +#define VOYAGER_SUS_IN_CONTROL_PORT 0x3ff +# define VOYAGER_IN_CONTROL_FLAG 0x80 + +/* Voyager PSI defines */ +#define VOYAGER_PSI_STATUS_REG 0x08 +# define PSI_DC_FAIL 0x01 +# define PSI_MON 0x02 +# define PSI_FAULT 0x04 +# define PSI_ALARM 0x08 +# define PSI_CURRENT 0x10 +# define PSI_DVM 0x20 +# define PSI_PSCFAULT 0x40 +# define PSI_STAT_CHG 0x80 + +#define VOYAGER_PSI_SUPPLY_REG 0x8000 + /* read */ +# define PSI_FAIL_DC 0x01 +# define PSI_FAIL_AC 0x02 +# define PSI_MON_INT 0x04 +# define PSI_SWITCH_OFF 0x08 +# define PSI_HX_OFF 0x10 +# define PSI_SECURITY 0x20 +# define PSI_CMOS_BATT_LOW 0x40 +# define PSI_CMOS_BATT_FAIL 0x80 + /* write */ +# define PSI_CLR_SWITCH_OFF 0x13 +# define PSI_CLR_HX_OFF 0x14 +# define PSI_CLR_CMOS_BATT_FAIL 0x17 + +#define VOYAGER_PSI_MASK 0x8001 +# define PSI_MASK_MASK 0x10 + +#define VOYAGER_PSI_AC_FAIL_REG 0x8004 +#define AC_FAIL_STAT_CHANGE 0x80 + +#define VOYAGER_PSI_GENERAL_REG 0x8007 + /* read */ +# define PSI_SWITCH_ON 0x01 +# define PSI_SWITCH_ENABLED 0x02 +# define PSI_ALARM_ENABLED 0x08 +# define PSI_SECURE_ENABLED 0x10 +# define PSI_COLD_RESET 0x20 +# define PSI_COLD_START 0x80 + /* write */ +# define PSI_POWER_DOWN 0x10 +# define PSI_SWITCH_DISABLE 0x01 +# define PSI_SWITCH_ENABLE 0x11 +# define PSI_CLEAR 0x12 +# define PSI_ALARM_DISABLE 0x03 +# define PSI_ALARM_ENABLE 0x13 +# define PSI_CLEAR_COLD_RESET 0x05 +# define PSI_SET_COLD_RESET 0x15 +# define PSI_CLEAR_COLD_START 0x07 +# define PSI_SET_COLD_START 0x17 + + + +struct voyager_bios_info { + __u8 len; + __u8 major; + __u8 minor; + __u8 debug; + __u8 num_classes; + __u8 class_1; + __u8 class_2; +}; + +/* The following structures and definitions are for the Kernel/SUS + * interface these are needed to find out how SUS initialised any Quad + * boards in the system */ + +#define NUMBER_OF_MC_BUSSES 2 +#define SLOTS_PER_MC_BUS 8 +#define MAX_CPUS 16 /* 16 way CPU system */ +#define MAX_PROCESSOR_BOARDS 4 /* 4 processor slot system */ +#define MAX_CACHE_LEVELS 4 /* # of cache levels supported */ +#define MAX_SHARED_CPUS 4 /* # of CPUs that can share a LARC */ +#define NUMBER_OF_POS_REGS 8 + +typedef struct { + __u8 MC_Slot __attribute__((packed)); + __u8 POS_Values[NUMBER_OF_POS_REGS] __attribute__((packed)); +} MC_SlotInformation_t; + +struct QuadDescription { + __u8 Type __attribute__((packed)); /* for type 0 (DYADIC or MONADIC) all fields + * will be zero except for slot */ + __u8 StructureVersion __attribute__((packed)); + __u32 CPI_BaseAddress __attribute__((packed)); + __u32 LARC_BankSize __attribute__((packed)); + __u32 LocalMemoryStateBits __attribute__((packed)); + __u8 Slot __attribute__((packed)); /* Processor slots 1 - 4 */ +}; + +struct ProcBoardInfo { + __u8 Type __attribute__((packed)); + __u8 StructureVersion __attribute__((packed)); + __u8 NumberOfBoards __attribute__((packed)); + struct QuadDescription QuadData[MAX_PROCESSOR_BOARDS] __attribute__((packed)); +}; + +struct CacheDescription { + __u8 Level __attribute__((packed)); + __u32 TotalSize __attribute__((packed)); + __u16 LineSize __attribute__((packed)); + __u8 Associativity __attribute__((packed)); + __u8 CacheType __attribute__((packed)); + __u8 WriteType __attribute__((packed)); + __u8 Number_CPUs_SharedBy __attribute__((packed)); + __u8 Shared_CPUs_Hardware_IDs[MAX_SHARED_CPUS] __attribute__((packed)); + +}; + +struct CPU_Description { + __u8 CPU_HardwareId __attribute__((packed)); + char *FRU_String __attribute__((packed)); + __u8 NumberOfCacheLevels __attribute__((packed)); + struct CacheDescription CacheLevelData[MAX_CACHE_LEVELS] __attribute__((packed)); +}; + +struct CPU_Info { + __u8 Type __attribute__((packed)); + __u8 StructureVersion __attribute__((packed)); + __u8 NumberOf_CPUs __attribute__((packed)); + struct CPU_Description CPU_Data[MAX_CPUS] __attribute__((packed)); +}; + + +/* + * This structure will be used by SUS and the OS. + * The assumption about this structure is that no blank space is + * packed in it by our friend the compiler. + */ +typedef struct { + __u8 Mailbox_SUS; /* Written to by SUS to give commands/response to the OS */ + __u8 Mailbox_OS; /* Written to by the OS to give commands/response to SUS */ + __u8 SUS_MailboxVersion; /* Tells the OS which iteration of the interface SUS supports */ + __u8 OS_MailboxVersion; /* Tells SUS which iteration of the interface the OS supports */ + __u32 OS_Flags; /* Flags set by the OS as info for SUS */ + __u32 SUS_Flags; /* Flags set by SUS as info for the OS */ + __u32 WatchDogPeriod; /* Watchdog period (in seconds) which the DP uses to see if the OS is dead */ + __u32 WatchDogCount; /* Updated by the OS on every tic. */ + __u32 MemoryFor_SUS_ErrorLog; /* Flat 32 bit address which tells SUS where to stuff the SUS error log on a dump */ + MC_SlotInformation_t MC_SlotInfo[NUMBER_OF_MC_BUSSES*SLOTS_PER_MC_BUS]; /* Storage for MCA POS data */ + /* All new SECOND_PASS_INTERFACE fields added from this point */ + struct ProcBoardInfo *BoardData; + struct CPU_Info *CPU_Data; + /* All new fields must be added from this point */ +} Voyager_KernelSUS_Mbox_t; + +/* structure for finding the right memory address to send a QIC CPI to */ +struct voyager_qic_cpi { + /* Each cache line (32 bytes) can trigger a cpi. The cpi + * read/write may occur anywhere in the cache line---pick the + * middle to be safe */ + struct { + __u32 pad1[3]; + __u32 cpi; + __u32 pad2[4]; + } qic_cpi[8]; +}; + +struct voyager_status { + __u32 power_fail:1; + __u32 switch_off:1; + __u32 request_from_kernel:1; +}; + +struct voyager_psi_regs { + __u8 cat_id; + __u8 cat_dev; + __u8 cat_control; + __u8 subaddr; + __u8 dummy4; + __u8 checkbit; + __u8 subaddr_low; + __u8 subaddr_high; + __u8 intstatus; + __u8 stat1; + __u8 stat3; + __u8 fault; + __u8 tms; + __u8 gen; + __u8 sysconf; + __u8 dummy15; +}; + +struct voyager_psi_subregs { + __u8 supply; + __u8 mask; + __u8 present; + __u8 DCfail; + __u8 ACfail; + __u8 fail; + __u8 UPSfail; + __u8 genstatus; +}; + +struct voyager_psi { + struct voyager_psi_regs regs; + struct voyager_psi_subregs subregs; +}; + +struct voyager_SUS { +#define VOYAGER_DUMP_BUTTON_NMI 0x1 +#define VOYAGER_SUS_VALID 0x2 +#define VOYAGER_SYSINT_COMPLETE 0x3 + __u8 SUS_mbox; +#define VOYAGER_NO_COMMAND 0x0 +#define VOYAGER_IGNORE_DUMP 0x1 +#define VOYAGER_DO_DUMP 0x2 +#define VOYAGER_SYSINT_HANDSHAKE 0x3 +#define VOYAGER_DO_MEM_DUMP 0x4 +#define VOYAGER_SYSINT_WAS_RECOVERED 0x5 + __u8 kernel_mbox; +#define VOYAGER_MAILBOX_VERSION 0x10 + __u8 SUS_version; + __u8 kernel_version; +#define VOYAGER_OS_HAS_SYSINT 0x1 +#define VOYAGER_OS_IN_PROGRESS 0x2 +#define VOYAGER_UPDATING_WDPERIOD 0x4 + __u32 kernel_flags; +#define VOYAGER_SUS_BOOTING 0x1 +#define VOYAGER_SUS_IN_PROGRESS 0x2 + __u32 SUS_flags; + __u32 watchdog_period; + __u32 watchdog_count; + __u32 SUS_errorlog; + /* lots of system configuration stuff under here */ +}; + +/* Variables exported by voyager_smp */ +extern __u32 voyager_extended_vic_processors; +extern __u32 voyager_allowed_boot_processors; +extern __u32 voyager_quad_processors; +extern struct voyager_qic_cpi *voyager_quad_cpi_addr[NR_CPUS]; +extern struct voyager_SUS *voyager_SUS; + +/* variables exported always */ +extern int voyager_level; +extern int kvoyagerd_running; +extern struct semaphore kvoyagerd_sem; +extern struct voyager_status voyager_status; + + + +/* functions exported by the voyager and voyager_smp modules */ + +extern int voyager_cat_readb(__u8 module, __u8 asic, int reg); +extern void voyager_cat_init(void); +extern void voyager_detect(struct voyager_bios_info *); +extern void voyager_trap_init(void); +extern void voyager_setup_irqs(void); +extern int voyager_memory_detect(int region, __u32 *addr, __u32 *length); +extern void voyager_smp_intr_init(void); +extern __u8 voyager_extended_cmos_read(__u16 cmos_address); +extern void voyager_smp_dump(void); +extern void voyager_timer_interrupt(struct pt_regs *regs); +extern void smp_local_timer_interrupt(struct pt_regs * regs); +extern void voyager_power_off(void); +extern void smp_voyager_power_off(void *dummy); +extern void voyager_restart(void); +extern void voyager_cat_power_off(void); +extern void voyager_cat_do_common_interrupt(void); +extern void voyager_handle_nmi(void); +/* Commands for the following are */ +#define VOYAGER_PSI_READ 0 +#define VOYAGER_PSI_WRITE 1 +#define VOYAGER_PSI_SUBREAD 2 +#define VOYAGER_PSI_SUBWRITE 3 +extern void voyager_cat_psi(__u8, __u16, __u8 *); diff --git a/include/asm-i386/xor.h b/include/asm-i386/xor.h new file mode 100644 index 00000000000..f80e2dbe1b5 --- /dev/null +++ b/include/asm-i386/xor.h @@ -0,0 +1,883 @@ +/* + * include/asm-i386/xor.h + * + * Optimized RAID-5 checksumming functions for MMX and SSE. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * You should have received a copy of the GNU General Public License + * (for example /usr/src/linux/COPYING); if not, write to the Free + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * High-speed RAID5 checksumming functions utilizing MMX instructions. + * Copyright (C) 1998 Ingo Molnar. + */ + +#define LD(x,y) " movq 8*("#x")(%1), %%mm"#y" ;\n" +#define ST(x,y) " movq %%mm"#y", 8*("#x")(%1) ;\n" +#define XO1(x,y) " pxor 8*("#x")(%2), %%mm"#y" ;\n" +#define XO2(x,y) " pxor 8*("#x")(%3), %%mm"#y" ;\n" +#define XO3(x,y) " pxor 8*("#x")(%4), %%mm"#y" ;\n" +#define XO4(x,y) " pxor 8*("#x")(%5), %%mm"#y" ;\n" + +#include + +static void +xor_pII_mmx_2(unsigned long bytes, unsigned long *p1, unsigned long *p2) +{ + unsigned long lines = bytes >> 7; + + kernel_fpu_begin(); + + __asm__ __volatile__ ( +#undef BLOCK +#define BLOCK(i) \ + LD(i,0) \ + LD(i+1,1) \ + LD(i+2,2) \ + LD(i+3,3) \ + XO1(i,0) \ + ST(i,0) \ + XO1(i+1,1) \ + ST(i+1,1) \ + XO1(i+2,2) \ + ST(i+2,2) \ + XO1(i+3,3) \ + ST(i+3,3) + + " .align 32 ;\n" + " 1: ;\n" + + BLOCK(0) + BLOCK(4) + BLOCK(8) + BLOCK(12) + + " addl $128, %1 ;\n" + " addl $128, %2 ;\n" + " decl %0 ;\n" + " jnz 1b ;\n" + : "+r" (lines), + "+r" (p1), "+r" (p2) + : + : "memory"); + + kernel_fpu_end(); +} + +static void +xor_pII_mmx_3(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3) +{ + unsigned long lines = bytes >> 7; + + kernel_fpu_begin(); + + __asm__ __volatile__ ( +#undef BLOCK +#define BLOCK(i) \ + LD(i,0) \ + LD(i+1,1) \ + LD(i+2,2) \ + LD(i+3,3) \ + XO1(i,0) \ + XO1(i+1,1) \ + XO1(i+2,2) \ + XO1(i+3,3) \ + XO2(i,0) \ + ST(i,0) \ + XO2(i+1,1) \ + ST(i+1,1) \ + XO2(i+2,2) \ + ST(i+2,2) \ + XO2(i+3,3) \ + ST(i+3,3) + + " .align 32 ;\n" + " 1: ;\n" + + BLOCK(0) + BLOCK(4) + BLOCK(8) + BLOCK(12) + + " addl $128, %1 ;\n" + " addl $128, %2 ;\n" + " addl $128, %3 ;\n" + " decl %0 ;\n" + " jnz 1b ;\n" + : "+r" (lines), + "+r" (p1), "+r" (p2), "+r" (p3) + : + : "memory"); + + kernel_fpu_end(); +} + +static void +xor_pII_mmx_4(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3, unsigned long *p4) +{ + unsigned long lines = bytes >> 7; + + kernel_fpu_begin(); + + __asm__ __volatile__ ( +#undef BLOCK +#define BLOCK(i) \ + LD(i,0) \ + LD(i+1,1) \ + LD(i+2,2) \ + LD(i+3,3) \ + XO1(i,0) \ + XO1(i+1,1) \ + XO1(i+2,2) \ + XO1(i+3,3) \ + XO2(i,0) \ + XO2(i+1,1) \ + XO2(i+2,2) \ + XO2(i+3,3) \ + XO3(i,0) \ + ST(i,0) \ + XO3(i+1,1) \ + ST(i+1,1) \ + XO3(i+2,2) \ + ST(i+2,2) \ + XO3(i+3,3) \ + ST(i+3,3) + + " .align 32 ;\n" + " 1: ;\n" + + BLOCK(0) + BLOCK(4) + BLOCK(8) + BLOCK(12) + + " addl $128, %1 ;\n" + " addl $128, %2 ;\n" + " addl $128, %3 ;\n" + " addl $128, %4 ;\n" + " decl %0 ;\n" + " jnz 1b ;\n" + : "+r" (lines), + "+r" (p1), "+r" (p2), "+r" (p3), "+r" (p4) + : + : "memory"); + + kernel_fpu_end(); +} + + +static void +xor_pII_mmx_5(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3, unsigned long *p4, unsigned long *p5) +{ + unsigned long lines = bytes >> 7; + + kernel_fpu_begin(); + + /* Make sure GCC forgets anything it knows about p4 or p5, + such that it won't pass to the asm volatile below a + register that is shared with any other variable. That's + because we modify p4 and p5 there, but we can't mark them + as read/write, otherwise we'd overflow the 10-asm-operands + limit of GCC < 3.1. */ + __asm__ ("" : "+r" (p4), "+r" (p5)); + + __asm__ __volatile__ ( +#undef BLOCK +#define BLOCK(i) \ + LD(i,0) \ + LD(i+1,1) \ + LD(i+2,2) \ + LD(i+3,3) \ + XO1(i,0) \ + XO1(i+1,1) \ + XO1(i+2,2) \ + XO1(i+3,3) \ + XO2(i,0) \ + XO2(i+1,1) \ + XO2(i+2,2) \ + XO2(i+3,3) \ + XO3(i,0) \ + XO3(i+1,1) \ + XO3(i+2,2) \ + XO3(i+3,3) \ + XO4(i,0) \ + ST(i,0) \ + XO4(i+1,1) \ + ST(i+1,1) \ + XO4(i+2,2) \ + ST(i+2,2) \ + XO4(i+3,3) \ + ST(i+3,3) + + " .align 32 ;\n" + " 1: ;\n" + + BLOCK(0) + BLOCK(4) + BLOCK(8) + BLOCK(12) + + " addl $128, %1 ;\n" + " addl $128, %2 ;\n" + " addl $128, %3 ;\n" + " addl $128, %4 ;\n" + " addl $128, %5 ;\n" + " decl %0 ;\n" + " jnz 1b ;\n" + : "+r" (lines), + "+r" (p1), "+r" (p2), "+r" (p3) + : "r" (p4), "r" (p5) + : "memory"); + + /* p4 and p5 were modified, and now the variables are dead. + Clobber them just to be sure nobody does something stupid + like assuming they have some legal value. */ + __asm__ ("" : "=r" (p4), "=r" (p5)); + + kernel_fpu_end(); +} + +#undef LD +#undef XO1 +#undef XO2 +#undef XO3 +#undef XO4 +#undef ST +#undef BLOCK + +static void +xor_p5_mmx_2(unsigned long bytes, unsigned long *p1, unsigned long *p2) +{ + unsigned long lines = bytes >> 6; + + kernel_fpu_begin(); + + __asm__ __volatile__ ( + " .align 32 ;\n" + " 1: ;\n" + " movq (%1), %%mm0 ;\n" + " movq 8(%1), %%mm1 ;\n" + " pxor (%2), %%mm0 ;\n" + " movq 16(%1), %%mm2 ;\n" + " movq %%mm0, (%1) ;\n" + " pxor 8(%2), %%mm1 ;\n" + " movq 24(%1), %%mm3 ;\n" + " movq %%mm1, 8(%1) ;\n" + " pxor 16(%2), %%mm2 ;\n" + " movq 32(%1), %%mm4 ;\n" + " movq %%mm2, 16(%1) ;\n" + " pxor 24(%2), %%mm3 ;\n" + " movq 40(%1), %%mm5 ;\n" + " movq %%mm3, 24(%1) ;\n" + " pxor 32(%2), %%mm4 ;\n" + " movq 48(%1), %%mm6 ;\n" + " movq %%mm4, 32(%1) ;\n" + " pxor 40(%2), %%mm5 ;\n" + " movq 56(%1), %%mm7 ;\n" + " movq %%mm5, 40(%1) ;\n" + " pxor 48(%2), %%mm6 ;\n" + " pxor 56(%2), %%mm7 ;\n" + " movq %%mm6, 48(%1) ;\n" + " movq %%mm7, 56(%1) ;\n" + + " addl $64, %1 ;\n" + " addl $64, %2 ;\n" + " decl %0 ;\n" + " jnz 1b ;\n" + : "+r" (lines), + "+r" (p1), "+r" (p2) + : + : "memory"); + + kernel_fpu_end(); +} + +static void +xor_p5_mmx_3(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3) +{ + unsigned long lines = bytes >> 6; + + kernel_fpu_begin(); + + __asm__ __volatile__ ( + " .align 32,0x90 ;\n" + " 1: ;\n" + " movq (%1), %%mm0 ;\n" + " movq 8(%1), %%mm1 ;\n" + " pxor (%2), %%mm0 ;\n" + " movq 16(%1), %%mm2 ;\n" + " pxor 8(%2), %%mm1 ;\n" + " pxor (%3), %%mm0 ;\n" + " pxor 16(%2), %%mm2 ;\n" + " movq %%mm0, (%1) ;\n" + " pxor 8(%3), %%mm1 ;\n" + " pxor 16(%3), %%mm2 ;\n" + " movq 24(%1), %%mm3 ;\n" + " movq %%mm1, 8(%1) ;\n" + " movq 32(%1), %%mm4 ;\n" + " movq 40(%1), %%mm5 ;\n" + " pxor 24(%2), %%mm3 ;\n" + " movq %%mm2, 16(%1) ;\n" + " pxor 32(%2), %%mm4 ;\n" + " pxor 24(%3), %%mm3 ;\n" + " pxor 40(%2), %%mm5 ;\n" + " movq %%mm3, 24(%1) ;\n" + " pxor 32(%3), %%mm4 ;\n" + " pxor 40(%3), %%mm5 ;\n" + " movq 48(%1), %%mm6 ;\n" + " movq %%mm4, 32(%1) ;\n" + " movq 56(%1), %%mm7 ;\n" + " pxor 48(%2), %%mm6 ;\n" + " movq %%mm5, 40(%1) ;\n" + " pxor 56(%2), %%mm7 ;\n" + " pxor 48(%3), %%mm6 ;\n" + " pxor 56(%3), %%mm7 ;\n" + " movq %%mm6, 48(%1) ;\n" + " movq %%mm7, 56(%1) ;\n" + + " addl $64, %1 ;\n" + " addl $64, %2 ;\n" + " addl $64, %3 ;\n" + " decl %0 ;\n" + " jnz 1b ;\n" + : "+r" (lines), + "+r" (p1), "+r" (p2), "+r" (p3) + : + : "memory" ); + + kernel_fpu_end(); +} + +static void +xor_p5_mmx_4(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3, unsigned long *p4) +{ + unsigned long lines = bytes >> 6; + + kernel_fpu_begin(); + + __asm__ __volatile__ ( + " .align 32,0x90 ;\n" + " 1: ;\n" + " movq (%1), %%mm0 ;\n" + " movq 8(%1), %%mm1 ;\n" + " pxor (%2), %%mm0 ;\n" + " movq 16(%1), %%mm2 ;\n" + " pxor 8(%2), %%mm1 ;\n" + " pxor (%3), %%mm0 ;\n" + " pxor 16(%2), %%mm2 ;\n" + " pxor 8(%3), %%mm1 ;\n" + " pxor (%4), %%mm0 ;\n" + " movq 24(%1), %%mm3 ;\n" + " pxor 16(%3), %%mm2 ;\n" + " pxor 8(%4), %%mm1 ;\n" + " movq %%mm0, (%1) ;\n" + " movq 32(%1), %%mm4 ;\n" + " pxor 24(%2), %%mm3 ;\n" + " pxor 16(%4), %%mm2 ;\n" + " movq %%mm1, 8(%1) ;\n" + " movq 40(%1), %%mm5 ;\n" + " pxor 32(%2), %%mm4 ;\n" + " pxor 24(%3), %%mm3 ;\n" + " movq %%mm2, 16(%1) ;\n" + " pxor 40(%2), %%mm5 ;\n" + " pxor 32(%3), %%mm4 ;\n" + " pxor 24(%4), %%mm3 ;\n" + " movq %%mm3, 24(%1) ;\n" + " movq 56(%1), %%mm7 ;\n" + " movq 48(%1), %%mm6 ;\n" + " pxor 40(%3), %%mm5 ;\n" + " pxor 32(%4), %%mm4 ;\n" + " pxor 48(%2), %%mm6 ;\n" + " movq %%mm4, 32(%1) ;\n" + " pxor 56(%2), %%mm7 ;\n" + " pxor 40(%4), %%mm5 ;\n" + " pxor 48(%3), %%mm6 ;\n" + " pxor 56(%3), %%mm7 ;\n" + " movq %%mm5, 40(%1) ;\n" + " pxor 48(%4), %%mm6 ;\n" + " pxor 56(%4), %%mm7 ;\n" + " movq %%mm6, 48(%1) ;\n" + " movq %%mm7, 56(%1) ;\n" + + " addl $64, %1 ;\n" + " addl $64, %2 ;\n" + " addl $64, %3 ;\n" + " addl $64, %4 ;\n" + " decl %0 ;\n" + " jnz 1b ;\n" + : "+r" (lines), + "+r" (p1), "+r" (p2), "+r" (p3), "+r" (p4) + : + : "memory"); + + kernel_fpu_end(); +} + +static void +xor_p5_mmx_5(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3, unsigned long *p4, unsigned long *p5) +{ + unsigned long lines = bytes >> 6; + + kernel_fpu_begin(); + + /* Make sure GCC forgets anything it knows about p4 or p5, + such that it won't pass to the asm volatile below a + register that is shared with any other variable. That's + because we modify p4 and p5 there, but we can't mark them + as read/write, otherwise we'd overflow the 10-asm-operands + limit of GCC < 3.1. */ + __asm__ ("" : "+r" (p4), "+r" (p5)); + + __asm__ __volatile__ ( + " .align 32,0x90 ;\n" + " 1: ;\n" + " movq (%1), %%mm0 ;\n" + " movq 8(%1), %%mm1 ;\n" + " pxor (%2), %%mm0 ;\n" + " pxor 8(%2), %%mm1 ;\n" + " movq 16(%1), %%mm2 ;\n" + " pxor (%3), %%mm0 ;\n" + " pxor 8(%3), %%mm1 ;\n" + " pxor 16(%2), %%mm2 ;\n" + " pxor (%4), %%mm0 ;\n" + " pxor 8(%4), %%mm1 ;\n" + " pxor 16(%3), %%mm2 ;\n" + " movq 24(%1), %%mm3 ;\n" + " pxor (%5), %%mm0 ;\n" + " pxor 8(%5), %%mm1 ;\n" + " movq %%mm0, (%1) ;\n" + " pxor 16(%4), %%mm2 ;\n" + " pxor 24(%2), %%mm3 ;\n" + " movq %%mm1, 8(%1) ;\n" + " pxor 16(%5), %%mm2 ;\n" + " pxor 24(%3), %%mm3 ;\n" + " movq 32(%1), %%mm4 ;\n" + " movq %%mm2, 16(%1) ;\n" + " pxor 24(%4), %%mm3 ;\n" + " pxor 32(%2), %%mm4 ;\n" + " movq 40(%1), %%mm5 ;\n" + " pxor 24(%5), %%mm3 ;\n" + " pxor 32(%3), %%mm4 ;\n" + " pxor 40(%2), %%mm5 ;\n" + " movq %%mm3, 24(%1) ;\n" + " pxor 32(%4), %%mm4 ;\n" + " pxor 40(%3), %%mm5 ;\n" + " movq 48(%1), %%mm6 ;\n" + " movq 56(%1), %%mm7 ;\n" + " pxor 32(%5), %%mm4 ;\n" + " pxor 40(%4), %%mm5 ;\n" + " pxor 48(%2), %%mm6 ;\n" + " pxor 56(%2), %%mm7 ;\n" + " movq %%mm4, 32(%1) ;\n" + " pxor 48(%3), %%mm6 ;\n" + " pxor 56(%3), %%mm7 ;\n" + " pxor 40(%5), %%mm5 ;\n" + " pxor 48(%4), %%mm6 ;\n" + " pxor 56(%4), %%mm7 ;\n" + " movq %%mm5, 40(%1) ;\n" + " pxor 48(%5), %%mm6 ;\n" + " pxor 56(%5), %%mm7 ;\n" + " movq %%mm6, 48(%1) ;\n" + " movq %%mm7, 56(%1) ;\n" + + " addl $64, %1 ;\n" + " addl $64, %2 ;\n" + " addl $64, %3 ;\n" + " addl $64, %4 ;\n" + " addl $64, %5 ;\n" + " decl %0 ;\n" + " jnz 1b ;\n" + : "+r" (lines), + "+r" (p1), "+r" (p2), "+r" (p3) + : "r" (p4), "r" (p5) + : "memory"); + + /* p4 and p5 were modified, and now the variables are dead. + Clobber them just to be sure nobody does something stupid + like assuming they have some legal value. */ + __asm__ ("" : "=r" (p4), "=r" (p5)); + + kernel_fpu_end(); +} + +static struct xor_block_template xor_block_pII_mmx = { + .name = "pII_mmx", + .do_2 = xor_pII_mmx_2, + .do_3 = xor_pII_mmx_3, + .do_4 = xor_pII_mmx_4, + .do_5 = xor_pII_mmx_5, +}; + +static struct xor_block_template xor_block_p5_mmx = { + .name = "p5_mmx", + .do_2 = xor_p5_mmx_2, + .do_3 = xor_p5_mmx_3, + .do_4 = xor_p5_mmx_4, + .do_5 = xor_p5_mmx_5, +}; + +/* + * Cache avoiding checksumming functions utilizing KNI instructions + * Copyright (C) 1999 Zach Brown (with obvious credit due Ingo) + */ + +#define XMMS_SAVE do { \ + preempt_disable(); \ + __asm__ __volatile__ ( \ + "movl %%cr0,%0 ;\n\t" \ + "clts ;\n\t" \ + "movups %%xmm0,(%1) ;\n\t" \ + "movups %%xmm1,0x10(%1) ;\n\t" \ + "movups %%xmm2,0x20(%1) ;\n\t" \ + "movups %%xmm3,0x30(%1) ;\n\t" \ + : "=&r" (cr0) \ + : "r" (xmm_save) \ + : "memory"); \ +} while(0) + +#define XMMS_RESTORE do { \ + __asm__ __volatile__ ( \ + "sfence ;\n\t" \ + "movups (%1),%%xmm0 ;\n\t" \ + "movups 0x10(%1),%%xmm1 ;\n\t" \ + "movups 0x20(%1),%%xmm2 ;\n\t" \ + "movups 0x30(%1),%%xmm3 ;\n\t" \ + "movl %0,%%cr0 ;\n\t" \ + : \ + : "r" (cr0), "r" (xmm_save) \ + : "memory"); \ + preempt_enable(); \ +} while(0) + +#define ALIGN16 __attribute__((aligned(16))) + +#define OFFS(x) "16*("#x")" +#define PF_OFFS(x) "256+16*("#x")" +#define PF0(x) " prefetchnta "PF_OFFS(x)"(%1) ;\n" +#define LD(x,y) " movaps "OFFS(x)"(%1), %%xmm"#y" ;\n" +#define ST(x,y) " movaps %%xmm"#y", "OFFS(x)"(%1) ;\n" +#define PF1(x) " prefetchnta "PF_OFFS(x)"(%2) ;\n" +#define PF2(x) " prefetchnta "PF_OFFS(x)"(%3) ;\n" +#define PF3(x) " prefetchnta "PF_OFFS(x)"(%4) ;\n" +#define PF4(x) " prefetchnta "PF_OFFS(x)"(%5) ;\n" +#define PF5(x) " prefetchnta "PF_OFFS(x)"(%6) ;\n" +#define XO1(x,y) " xorps "OFFS(x)"(%2), %%xmm"#y" ;\n" +#define XO2(x,y) " xorps "OFFS(x)"(%3), %%xmm"#y" ;\n" +#define XO3(x,y) " xorps "OFFS(x)"(%4), %%xmm"#y" ;\n" +#define XO4(x,y) " xorps "OFFS(x)"(%5), %%xmm"#y" ;\n" +#define XO5(x,y) " xorps "OFFS(x)"(%6), %%xmm"#y" ;\n" + + +static void +xor_sse_2(unsigned long bytes, unsigned long *p1, unsigned long *p2) +{ + unsigned long lines = bytes >> 8; + char xmm_save[16*4] ALIGN16; + int cr0; + + XMMS_SAVE; + + __asm__ __volatile__ ( +#undef BLOCK +#define BLOCK(i) \ + LD(i,0) \ + LD(i+1,1) \ + PF1(i) \ + PF1(i+2) \ + LD(i+2,2) \ + LD(i+3,3) \ + PF0(i+4) \ + PF0(i+6) \ + XO1(i,0) \ + XO1(i+1,1) \ + XO1(i+2,2) \ + XO1(i+3,3) \ + ST(i,0) \ + ST(i+1,1) \ + ST(i+2,2) \ + ST(i+3,3) \ + + + PF0(0) + PF0(2) + + " .align 32 ;\n" + " 1: ;\n" + + BLOCK(0) + BLOCK(4) + BLOCK(8) + BLOCK(12) + + " addl $256, %1 ;\n" + " addl $256, %2 ;\n" + " decl %0 ;\n" + " jnz 1b ;\n" + : "+r" (lines), + "+r" (p1), "+r" (p2) + : + : "memory"); + + XMMS_RESTORE; +} + +static void +xor_sse_3(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3) +{ + unsigned long lines = bytes >> 8; + char xmm_save[16*4] ALIGN16; + int cr0; + + XMMS_SAVE; + + __asm__ __volatile__ ( +#undef BLOCK +#define BLOCK(i) \ + PF1(i) \ + PF1(i+2) \ + LD(i,0) \ + LD(i+1,1) \ + LD(i+2,2) \ + LD(i+3,3) \ + PF2(i) \ + PF2(i+2) \ + PF0(i+4) \ + PF0(i+6) \ + XO1(i,0) \ + XO1(i+1,1) \ + XO1(i+2,2) \ + XO1(i+3,3) \ + XO2(i,0) \ + XO2(i+1,1) \ + XO2(i+2,2) \ + XO2(i+3,3) \ + ST(i,0) \ + ST(i+1,1) \ + ST(i+2,2) \ + ST(i+3,3) \ + + + PF0(0) + PF0(2) + + " .align 32 ;\n" + " 1: ;\n" + + BLOCK(0) + BLOCK(4) + BLOCK(8) + BLOCK(12) + + " addl $256, %1 ;\n" + " addl $256, %2 ;\n" + " addl $256, %3 ;\n" + " decl %0 ;\n" + " jnz 1b ;\n" + : "+r" (lines), + "+r" (p1), "+r"(p2), "+r"(p3) + : + : "memory" ); + + XMMS_RESTORE; +} + +static void +xor_sse_4(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3, unsigned long *p4) +{ + unsigned long lines = bytes >> 8; + char xmm_save[16*4] ALIGN16; + int cr0; + + XMMS_SAVE; + + __asm__ __volatile__ ( +#undef BLOCK +#define BLOCK(i) \ + PF1(i) \ + PF1(i+2) \ + LD(i,0) \ + LD(i+1,1) \ + LD(i+2,2) \ + LD(i+3,3) \ + PF2(i) \ + PF2(i+2) \ + XO1(i,0) \ + XO1(i+1,1) \ + XO1(i+2,2) \ + XO1(i+3,3) \ + PF3(i) \ + PF3(i+2) \ + PF0(i+4) \ + PF0(i+6) \ + XO2(i,0) \ + XO2(i+1,1) \ + XO2(i+2,2) \ + XO2(i+3,3) \ + XO3(i,0) \ + XO3(i+1,1) \ + XO3(i+2,2) \ + XO3(i+3,3) \ + ST(i,0) \ + ST(i+1,1) \ + ST(i+2,2) \ + ST(i+3,3) \ + + + PF0(0) + PF0(2) + + " .align 32 ;\n" + " 1: ;\n" + + BLOCK(0) + BLOCK(4) + BLOCK(8) + BLOCK(12) + + " addl $256, %1 ;\n" + " addl $256, %2 ;\n" + " addl $256, %3 ;\n" + " addl $256, %4 ;\n" + " decl %0 ;\n" + " jnz 1b ;\n" + : "+r" (lines), + "+r" (p1), "+r" (p2), "+r" (p3), "+r" (p4) + : + : "memory" ); + + XMMS_RESTORE; +} + +static void +xor_sse_5(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3, unsigned long *p4, unsigned long *p5) +{ + unsigned long lines = bytes >> 8; + char xmm_save[16*4] ALIGN16; + int cr0; + + XMMS_SAVE; + + /* Make sure GCC forgets anything it knows about p4 or p5, + such that it won't pass to the asm volatile below a + register that is shared with any other variable. That's + because we modify p4 and p5 there, but we can't mark them + as read/write, otherwise we'd overflow the 10-asm-operands + limit of GCC < 3.1. */ + __asm__ ("" : "+r" (p4), "+r" (p5)); + + __asm__ __volatile__ ( +#undef BLOCK +#define BLOCK(i) \ + PF1(i) \ + PF1(i+2) \ + LD(i,0) \ + LD(i+1,1) \ + LD(i+2,2) \ + LD(i+3,3) \ + PF2(i) \ + PF2(i+2) \ + XO1(i,0) \ + XO1(i+1,1) \ + XO1(i+2,2) \ + XO1(i+3,3) \ + PF3(i) \ + PF3(i+2) \ + XO2(i,0) \ + XO2(i+1,1) \ + XO2(i+2,2) \ + XO2(i+3,3) \ + PF4(i) \ + PF4(i+2) \ + PF0(i+4) \ + PF0(i+6) \ + XO3(i,0) \ + XO3(i+1,1) \ + XO3(i+2,2) \ + XO3(i+3,3) \ + XO4(i,0) \ + XO4(i+1,1) \ + XO4(i+2,2) \ + XO4(i+3,3) \ + ST(i,0) \ + ST(i+1,1) \ + ST(i+2,2) \ + ST(i+3,3) \ + + + PF0(0) + PF0(2) + + " .align 32 ;\n" + " 1: ;\n" + + BLOCK(0) + BLOCK(4) + BLOCK(8) + BLOCK(12) + + " addl $256, %1 ;\n" + " addl $256, %2 ;\n" + " addl $256, %3 ;\n" + " addl $256, %4 ;\n" + " addl $256, %5 ;\n" + " decl %0 ;\n" + " jnz 1b ;\n" + : "+r" (lines), + "+r" (p1), "+r" (p2), "+r" (p3) + : "r" (p4), "r" (p5) + : "memory"); + + /* p4 and p5 were modified, and now the variables are dead. + Clobber them just to be sure nobody does something stupid + like assuming they have some legal value. */ + __asm__ ("" : "=r" (p4), "=r" (p5)); + + XMMS_RESTORE; +} + +static struct xor_block_template xor_block_pIII_sse = { + .name = "pIII_sse", + .do_2 = xor_sse_2, + .do_3 = xor_sse_3, + .do_4 = xor_sse_4, + .do_5 = xor_sse_5, +}; + +/* Also try the generic routines. */ +#include + +#undef XOR_TRY_TEMPLATES +#define XOR_TRY_TEMPLATES \ + do { \ + xor_speed(&xor_block_8regs); \ + xor_speed(&xor_block_8regs_p); \ + xor_speed(&xor_block_32regs); \ + xor_speed(&xor_block_32regs_p); \ + if (cpu_has_xmm) \ + xor_speed(&xor_block_pIII_sse); \ + if (cpu_has_mmx) { \ + xor_speed(&xor_block_pII_mmx); \ + xor_speed(&xor_block_p5_mmx); \ + } \ + } while (0) + +/* We force the use of the SSE xor block because it can write around L2. + We may also be able to load into the L1 only depending on how the cpu + deals with a load to a line that is being prefetched. */ +#define XOR_SELECT_TEMPLATE(FASTEST) \ + (cpu_has_xmm ? &xor_block_pIII_sse : FASTEST) -- cgit v1.2.3