From 4a73d70ebe890fb71dcdd1cfcb788e1432ed0034 Mon Sep 17 00:00:00 2001
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Date: Sat, 22 May 2010 21:22:36 +0000
Subject: viafb: remove duplicated scaling code

viafb: remove duplicated scaling code

The code for P4M900 does the same as for all newer IGPs so there is no
reason to duplicate it. Just reducing the code to maintain.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Joseph Chan <JosephChan@via.com.tw>
---
 drivers/video/via/lcd.c | 75 ++-----------------------------------------------
 1 file changed, 2 insertions(+), 73 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/via/lcd.c b/drivers/video/via/lcd.c
index 2ab0f156439..438a106c7a4 100644
--- a/drivers/video/via/lcd.c
+++ b/drivers/video/via/lcd.c
@@ -75,8 +75,6 @@ static void check_diport_of_integrated_lvds(
 static struct display_timing lcd_centering_timging(struct display_timing
 					    mode_crt_reg,
 					   struct display_timing panel_crt_reg);
-static void viafb_load_scaling_factor_for_p4m900(int set_hres,
-	int set_vres, int panel_hres, int panel_vres);
 
 static int check_lvds_chip(int device_id_subaddr, int device_id)
 {
@@ -437,11 +435,6 @@ static void load_lcd_scaling(int set_hres, int set_vres, int panel_hres,
 
 	/* LCD Scaling Enable */
 	viafb_write_reg_mask(CR79, VIACR, 0x07, BIT0 + BIT1 + BIT2);
-	if (UNICHROME_P4M900 == viaparinfo->chip_info->gfx_chip_name) {
-		viafb_load_scaling_factor_for_p4m900(set_hres, set_vres,
-					       panel_hres, panel_vres);
-		return;
-	}
 
 	/* Check if expansion for horizontal */
 	if (set_hres != panel_hres) {
@@ -464,6 +457,7 @@ static void load_lcd_scaling(int set_hres, int set_vres, int panel_hres,
 		case UNICHROME_CX700:
 		case UNICHROME_K8M890:
 		case UNICHROME_P4M890:
+		case UNICHROME_P4M900:
 			reg_value =
 			    K800_LCD_HOR_SCF_FORMULA(set_hres, panel_hres);
 			/* Horizontal scaling enabled */
@@ -503,6 +497,7 @@ static void load_lcd_scaling(int set_hres, int set_vres, int panel_hres,
 		case UNICHROME_CX700:
 		case UNICHROME_K8M890:
 		case UNICHROME_P4M890:
+		case UNICHROME_P4M900:
 			reg_value =
 			    K800_LCD_VER_SCF_FORMULA(set_vres, panel_vres);
 			/* Vertical scaling enabled */
@@ -1139,69 +1134,3 @@ bool viafb_lcd_get_mobile_state(bool *mobile)
 		return false;
 	}
 }
-
-static void viafb_load_scaling_factor_for_p4m900(int set_hres,
-	int set_vres, int panel_hres, int panel_vres)
-{
-	int h_scaling_factor;
-	int v_scaling_factor;
-	u8 cra2 = 0;
-	u8 cr77 = 0;
-	u8 cr78 = 0;
-	u8 cr79 = 0;
-	u8 cr9f = 0;
-	/* Check if expansion for horizontal */
-	if (set_hres < panel_hres) {
-		/* Load Horizontal Scaling Factor */
-
-		/* For VIA_K8M800 or later chipsets. */
-		h_scaling_factor =
-		    K800_LCD_HOR_SCF_FORMULA(set_hres, panel_hres);
-		/* HSCaleFactor[1:0] at CR9F[1:0] */
-		cr9f = h_scaling_factor & 0x0003;
-		/* HSCaleFactor[9:2] at CR77[7:0] */
-		cr77 = (h_scaling_factor & 0x03FC) >> 2;
-		/* HSCaleFactor[11:10] at CR79[5:4] */
-		cr79 = (h_scaling_factor & 0x0C00) >> 10;
-		cr79 <<= 4;
-
-		/* Horizontal scaling enabled */
-		cra2 = 0xC0;
-
-		DEBUG_MSG(KERN_INFO "Horizontal Scaling value = %d\n",
-			  h_scaling_factor);
-	} else {
-		/* Horizontal scaling disabled */
-		cra2 = 0x00;
-	}
-
-	/* Check if expansion for vertical */
-	if (set_vres < panel_vres) {
-		/* Load Vertical Scaling Factor */
-
-		/* For VIA_K8M800 or later chipsets. */
-		v_scaling_factor =
-		    K800_LCD_VER_SCF_FORMULA(set_vres, panel_vres);
-
-		/* Vertical scaling enabled */
-		cra2 |= 0x08;
-		/* VSCaleFactor[0] at CR79[3] */
-		cr79 |= ((v_scaling_factor & 0x0001) << 3);
-		/* VSCaleFactor[8:1] at CR78[7:0] */
-		cr78 |= (v_scaling_factor & 0x01FE) >> 1;
-		/* VSCaleFactor[10:9] at CR79[7:6] */
-		cr79 |= ((v_scaling_factor & 0x0600) >> 9) << 6;
-
-		DEBUG_MSG(KERN_INFO "Vertical Scaling value = %d\n",
-			  v_scaling_factor);
-	} else {
-		/* Vertical scaling disabled */
-		cra2 |= 0x00;
-	}
-
-	viafb_write_reg_mask(CRA2, VIACR, cra2, BIT3 + BIT6 + BIT7);
-	viafb_write_reg_mask(CR77, VIACR, cr77, 0xFF);
-	viafb_write_reg_mask(CR78, VIACR, cr78, 0xFF);
-	viafb_write_reg_mask(CR79, VIACR, cr79, 0xF8);
-	viafb_write_reg_mask(CR9F, VIACR, cr9f, BIT0 + BIT1);
-}
-- 
cgit v1.2.3


From 119b953a80d28821a56567d84dab860b0edc7940 Mon Sep 17 00:00:00 2001
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Date: Sat, 22 May 2010 21:32:32 +0000
Subject: viafb: improve lcd code readability

viafb: improve lcd code readability

This changes the code to better reflect that we can (currently) only
perform upscaling.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Joseph Chan <JosephChan@via.com.tw>
---
 drivers/video/via/lcd.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/via/lcd.c b/drivers/video/via/lcd.c
index 438a106c7a4..55cb4ecfad0 100644
--- a/drivers/video/via/lcd.c
+++ b/drivers/video/via/lcd.c
@@ -437,7 +437,7 @@ static void load_lcd_scaling(int set_hres, int set_vres, int panel_hres,
 	viafb_write_reg_mask(CR79, VIACR, 0x07, BIT0 + BIT1 + BIT2);
 
 	/* Check if expansion for horizontal */
-	if (set_hres != panel_hres) {
+	if (set_hres < panel_hres) {
 		/* Load Horizontal Scaling Factor */
 		switch (viaparinfo->chip_info->gfx_chip_name) {
 		case UNICHROME_CLE266:
@@ -477,7 +477,7 @@ static void load_lcd_scaling(int set_hres, int set_vres, int panel_hres,
 	}
 
 	/* Check if expansion for vertical */
-	if (set_vres != panel_vres) {
+	if (set_vres < panel_vres) {
 		/* Load Vertical Scaling Factor */
 		switch (viaparinfo->chip_info->gfx_chip_name) {
 		case UNICHROME_CLE266:
@@ -643,9 +643,8 @@ void viafb_lcd_set_mode(struct crt_mode_table *mode_crt_table,
 				 (mode_crt_reg, panel_crt_reg), IGA1);
 	} else {
 		/* Expansion */
-		if ((plvds_setting_info->display_method ==
-		     LCD_EXPANDSION) & ((set_hres != panel_hres)
-					|| (set_vres != panel_vres))) {
+		if (plvds_setting_info->display_method == LCD_EXPANDSION
+			&& (set_hres < panel_hres || set_vres < panel_vres)) {
 			/* expansion timing IGA2 loaded panel set timing*/
 			viafb_load_crtc_timing(panel_crt_reg, IGA2);
 			DEBUG_MSG(KERN_INFO "viafb_load_crtc_timing!!\n");
-- 
cgit v1.2.3


From f1ad752a096aca76f93cd7f86815af8093366fdc Mon Sep 17 00:00:00 2001
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Date: Sat, 22 May 2010 22:32:57 +0000
Subject: viafb: add lcd scaling support for some IGPs

viafb: add lcd scaling support for some IGPs

These IGPs should also support lcd scaling but likely this switch was
missed when adding support for them. Fix it, allowing lcd scaling on
CN750, VX800 and VX855. At least this improves the situation for
VX855. (there seems to be another scaling unrelated bug somewhere)

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Joseph Chan <JosephChan@via.com.tw>
---
 drivers/video/via/lcd.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'drivers')

diff --git a/drivers/video/via/lcd.c b/drivers/video/via/lcd.c
index 55cb4ecfad0..568d15b91f0 100644
--- a/drivers/video/via/lcd.c
+++ b/drivers/video/via/lcd.c
@@ -458,6 +458,9 @@ static void load_lcd_scaling(int set_hres, int set_vres, int panel_hres,
 		case UNICHROME_K8M890:
 		case UNICHROME_P4M890:
 		case UNICHROME_P4M900:
+		case UNICHROME_CN750:
+		case UNICHROME_VX800:
+		case UNICHROME_VX855:
 			reg_value =
 			    K800_LCD_HOR_SCF_FORMULA(set_hres, panel_hres);
 			/* Horizontal scaling enabled */
@@ -498,6 +501,9 @@ static void load_lcd_scaling(int set_hres, int set_vres, int panel_hres,
 		case UNICHROME_K8M890:
 		case UNICHROME_P4M890:
 		case UNICHROME_P4M900:
+		case UNICHROME_CN750:
+		case UNICHROME_VX800:
+		case UNICHROME_VX855:
 			reg_value =
 			    K800_LCD_VER_SCF_FORMULA(set_vres, panel_vres);
 			/* Vertical scaling enabled */
-- 
cgit v1.2.3


From ad0676cf81c240e3857dc090c9ce0dde7537ac93 Mon Sep 17 00:00:00 2001
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Date: Sat, 22 May 2010 22:53:06 +0000
Subject: viafb: fix PCI table

viafb: fix PCI table

This patch fixes an oddity in the device table where the P4M890 ID was
assigned with the enumeration value of CN700 which itself was missing.
This is a regression introduced by
	"viafb: make viafb a first-class citizen using pci_driver"

While at it reorder the table to reflect the order of the  enumeration
values.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Harald Welte <laforge@gnumonks.org>
---
 drivers/video/via/via-core.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/via/via-core.c b/drivers/video/via/via-core.c
index e8cfe839211..4afa3c5c059 100644
--- a/drivers/video/via/via-core.c
+++ b/drivers/video/via/via-core.c
@@ -613,22 +613,24 @@ static void __devexit via_pci_remove(struct pci_dev *pdev)
 static struct pci_device_id via_pci_table[] __devinitdata = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CLE266_DID),
 	  .driver_data = UNICHROME_CLE266 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_PM800_DID),
-	  .driver_data = UNICHROME_PM800 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K400_DID),
 	  .driver_data = UNICHROME_K400 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K800_DID),
 	  .driver_data = UNICHROME_K800 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_P4M890_DID),
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_PM800_DID),
+	  .driver_data = UNICHROME_PM800 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CN700_DID),
 	  .driver_data = UNICHROME_CN700 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K8M890_DID),
-	  .driver_data = UNICHROME_K8M890 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CX700_DID),
 	  .driver_data = UNICHROME_CX700 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_P4M900_DID),
-	  .driver_data = UNICHROME_P4M900 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CN750_DID),
 	  .driver_data = UNICHROME_CN750 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K8M890_DID),
+	  .driver_data = UNICHROME_K8M890 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_P4M890_DID),
+	  .driver_data = UNICHROME_P4M890 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_P4M900_DID),
+	  .driver_data = UNICHROME_P4M900 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_VX800_DID),
 	  .driver_data = UNICHROME_VX800 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_VX855_DID),
-- 
cgit v1.2.3


From cc3fd679a344468e892a109b8de3e2948ce14e0f Mon Sep 17 00:00:00 2001
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Date: Wed, 2 Jun 2010 19:41:23 +0000
Subject: viafb: simplify lcd size "detection"

viafb: simplify lcd size "detection"

Remove all occurences of get_lcd_size_method as only the values
GET_LCD_SIZE_BY_VGA_BIOS and GET_LCD_SIZE_BY_USER_SETTING were used
which had the identical code so there is no need to make things look
more complicated than they actually are.
Just a bit of of cleanup, really no regressions expected.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Joseph Chan <JosephChan@via.com.tw>
---
 drivers/video/via/chip.h |  1 -
 drivers/video/via/hw.c   |  9 ---------
 drivers/video/via/lcd.c  | 27 +--------------------------
 drivers/video/via/lcd.h  |  5 -----
 4 files changed, 1 insertion(+), 41 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/via/chip.h b/drivers/video/via/chip.h
index d9b6e06e070..ef1f3de2e05 100644
--- a/drivers/video/via/chip.h
+++ b/drivers/video/via/chip.h
@@ -160,7 +160,6 @@ struct lvds_setting_information {
 	int v_active;
 	int bpp;
 	int refresh_rate;
-	int get_lcd_size_method;
 	int lcd_panel_id;
 	int lcd_panel_hres;
 	int lcd_panel_vres;
diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index b996803ae2c..05be8c13765 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -1791,8 +1791,6 @@ void viafb_init_chip_info(int chip_type)
 	viafb_set_iga_path();
 
 	viaparinfo->lvds_setting_info->display_method = viafb_lcd_dsp_method;
-	viaparinfo->lvds_setting_info->get_lcd_size_method =
-		GET_LCD_SIZE_BY_USER_SETTING;
 	viaparinfo->lvds_setting_info->lcd_mode = viafb_lcd_mode;
 	viaparinfo->lvds_setting_info2->display_method =
 		viaparinfo->lvds_setting_info->display_method;
@@ -1946,13 +1944,6 @@ static void init_tmds_chip_info(void)
 
 static void init_lvds_chip_info(void)
 {
-	if (viafb_lcd_panel_id > LCD_PANEL_ID_MAXIMUM)
-		viaparinfo->lvds_setting_info->get_lcd_size_method =
-		    GET_LCD_SIZE_BY_VGA_BIOS;
-	else
-		viaparinfo->lvds_setting_info->get_lcd_size_method =
-		    GET_LCD_SIZE_BY_USER_SETTING;
-
 	viafb_lvds_trasmitter_identify();
 	viafb_init_lcd_size();
 	viafb_init_lvds_output_interface(&viaparinfo->chip_info->lvds_chip_info,
diff --git a/drivers/video/via/lcd.c b/drivers/video/via/lcd.c
index 568d15b91f0..fc25ae30c5f 100644
--- a/drivers/video/via/lcd.c
+++ b/drivers/video/via/lcd.c
@@ -87,33 +87,8 @@ static int check_lvds_chip(int device_id_subaddr, int device_id)
 void viafb_init_lcd_size(void)
 {
 	DEBUG_MSG(KERN_INFO "viafb_init_lcd_size()\n");
-	DEBUG_MSG(KERN_INFO
-		"viaparinfo->lvds_setting_info->get_lcd_size_method %d\n",
-		viaparinfo->lvds_setting_info->get_lcd_size_method);
 
-	switch (viaparinfo->lvds_setting_info->get_lcd_size_method) {
-	case GET_LCD_SIZE_BY_SYSTEM_BIOS:
-		break;
-	case GET_LCD_SZIE_BY_HW_STRAPPING:
-		break;
-	case GET_LCD_SIZE_BY_VGA_BIOS:
-		DEBUG_MSG(KERN_INFO "Get LCD Size method by VGA BIOS !!\n");
-		fp_id_to_vindex(viafb_lcd_panel_id);
-		DEBUG_MSG(KERN_INFO "LCD Panel_ID = %d\n",
-			  viaparinfo->lvds_setting_info->lcd_panel_id);
-		break;
-	case GET_LCD_SIZE_BY_USER_SETTING:
-		DEBUG_MSG(KERN_INFO "Get LCD Size method by user setting !!\n");
-		fp_id_to_vindex(viafb_lcd_panel_id);
-		DEBUG_MSG(KERN_INFO "LCD Panel_ID = %d\n",
-			  viaparinfo->lvds_setting_info->lcd_panel_id);
-		break;
-	default:
-		DEBUG_MSG(KERN_INFO "viafb_init_lcd_size fail\n");
-		viaparinfo->lvds_setting_info->lcd_panel_id =
-			LCD_PANEL_ID1_800X600;
-		fp_id_to_vindex(LCD_PANEL_ID1_800X600);
-	}
+	fp_id_to_vindex(viafb_lcd_panel_id);
 	viaparinfo->lvds_setting_info2->lcd_panel_id =
 		viaparinfo->lvds_setting_info->lcd_panel_id;
 	viaparinfo->lvds_setting_info2->lcd_panel_hres =
diff --git a/drivers/video/via/lcd.h b/drivers/video/via/lcd.h
index 9762ec62b49..b348efc360b 100644
--- a/drivers/video/via/lcd.h
+++ b/drivers/video/via/lcd.h
@@ -28,11 +28,6 @@
 #define     VT3271_DEVICE_ID_REG        0x02
 #define     VT3271_DEVICE_ID            0x71
 
-#define     GET_LCD_SIZE_BY_SYSTEM_BIOS     0x01
-#define     GET_LCD_SIZE_BY_VGA_BIOS        0x02
-#define     GET_LCD_SZIE_BY_HW_STRAPPING    0x03
-#define     GET_LCD_SIZE_BY_USER_SETTING    0x04
-
 /* Definition DVI Panel ID*/
 /* Resolution: 640x480,   Channel: single, Dithering: Enable */
 #define     LCD_PANEL_ID0_640X480       0x00
-- 
cgit v1.2.3


From 1f844350909fe249cf6d9722da1735e4076ff7f0 Mon Sep 17 00:00:00 2001
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Date: Sun, 11 Jul 2010 00:57:34 +0000
Subject: viafb: PLL value cleanup

viafb: PLL value cleanup

This is a big change of how PLL values are handled on the road to
dynamic PLL value generation. The table was converted automatically in
the relevant parameters for frequency generation. Sadly there were some
bits set whose meaning is unknown. Those differences are documented
but ignored as the unichrome code implies that they are not important
(a big thanks to Luc for his amazing work).
The PLL values for 31490000 and 133308000 are deleted as they were more
than 5% off and not used anyway. The values for CX700@60466000 and
VX855@153920000 are corrected as they were wrong and easily correctable
as enough correct values was available because CX700 and VX855 support
the same values only with a little difference in hardware format.
All remaining values are not more than 2% off.
Additionally the surrounding code is changed as needed especially the
byte order of the values written to hardware to allow nicer conversion
functions.
This is mostly a change preparing for dynamic PLL generation and the two
corrected values aside no runtime change is expected.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Joseph Chan <JosephChan@via.com.tw>
---
 drivers/video/via/hw.c    | 578 ++++++++++++++++++++++++++++++++--------------
 drivers/video/via/hw.h    |  14 +-
 drivers/video/via/share.h | 309 -------------------------
 3 files changed, 412 insertions(+), 489 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index 05be8c13765..7dcb4d5bb9c 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -23,143 +23,341 @@
 #include "global.h"
 
 static struct pll_map pll_value[] = {
-	{CLK_25_175M, CLE266_PLL_25_175M, K800_PLL_25_175M,
-	 CX700_25_175M, VX855_25_175M},
-	{CLK_29_581M, CLE266_PLL_29_581M, K800_PLL_29_581M,
-	 CX700_29_581M, VX855_29_581M},
-	{CLK_26_880M, CLE266_PLL_26_880M, K800_PLL_26_880M,
-	 CX700_26_880M, VX855_26_880M},
-	{CLK_31_490M, CLE266_PLL_31_490M, K800_PLL_31_490M,
-	 CX700_31_490M, VX855_31_490M},
-	{CLK_31_500M, CLE266_PLL_31_500M, K800_PLL_31_500M,
-	 CX700_31_500M, VX855_31_500M},
-	{CLK_31_728M, CLE266_PLL_31_728M, K800_PLL_31_728M,
-	 CX700_31_728M, VX855_31_728M},
-	{CLK_32_668M, CLE266_PLL_32_668M, K800_PLL_32_668M,
-	 CX700_32_668M, VX855_32_668M},
-	{CLK_36_000M, CLE266_PLL_36_000M, K800_PLL_36_000M,
-	 CX700_36_000M, VX855_36_000M},
-	{CLK_40_000M, CLE266_PLL_40_000M, K800_PLL_40_000M,
-	 CX700_40_000M, VX855_40_000M},
-	{CLK_41_291M, CLE266_PLL_41_291M, K800_PLL_41_291M,
-	 CX700_41_291M, VX855_41_291M},
-	{CLK_43_163M, CLE266_PLL_43_163M, K800_PLL_43_163M,
-	 CX700_43_163M, VX855_43_163M},
-	{CLK_45_250M, CLE266_PLL_45_250M, K800_PLL_45_250M,
-	 CX700_45_250M, VX855_45_250M},
-	{CLK_46_000M, CLE266_PLL_46_000M, K800_PLL_46_000M,
-	 CX700_46_000M, VX855_46_000M},
-	{CLK_46_996M, CLE266_PLL_46_996M, K800_PLL_46_996M,
-	 CX700_46_996M, VX855_46_996M},
-	{CLK_48_000M, CLE266_PLL_48_000M, K800_PLL_48_000M,
-	 CX700_48_000M, VX855_48_000M},
-	{CLK_48_875M, CLE266_PLL_48_875M, K800_PLL_48_875M,
-	 CX700_48_875M, VX855_48_875M},
-	{CLK_49_500M, CLE266_PLL_49_500M, K800_PLL_49_500M,
-	 CX700_49_500M, VX855_49_500M},
-	{CLK_52_406M, CLE266_PLL_52_406M, K800_PLL_52_406M,
-	 CX700_52_406M, VX855_52_406M},
-	{CLK_52_977M, CLE266_PLL_52_977M, K800_PLL_52_977M,
-	 CX700_52_977M,	VX855_52_977M},
-	{CLK_56_250M, CLE266_PLL_56_250M, K800_PLL_56_250M,
-	 CX700_56_250M, VX855_56_250M},
-	{CLK_57_275M, 0, 0, 0, VX855_57_275M},
-	{CLK_60_466M, CLE266_PLL_60_466M, K800_PLL_60_466M,
-	 CX700_60_466M, VX855_60_466M},
-	{CLK_61_500M, CLE266_PLL_61_500M, K800_PLL_61_500M,
-	 CX700_61_500M, VX855_61_500M},
-	{CLK_65_000M, CLE266_PLL_65_000M, K800_PLL_65_000M,
-	 CX700_65_000M, VX855_65_000M},
-	{CLK_65_178M, CLE266_PLL_65_178M, K800_PLL_65_178M,
-	 CX700_65_178M, VX855_65_178M},
-	{CLK_66_750M, CLE266_PLL_66_750M, K800_PLL_66_750M,
-	 CX700_66_750M, VX855_66_750M},
-	{CLK_68_179M, CLE266_PLL_68_179M, K800_PLL_68_179M,
-	 CX700_68_179M, VX855_68_179M},
-	{CLK_69_924M, CLE266_PLL_69_924M, K800_PLL_69_924M,
-	 CX700_69_924M, VX855_69_924M},
-	{CLK_70_159M, CLE266_PLL_70_159M, K800_PLL_70_159M,
-	 CX700_70_159M, VX855_70_159M},
-	{CLK_72_000M, CLE266_PLL_72_000M, K800_PLL_72_000M,
-	 CX700_72_000M, VX855_72_000M},
-	{CLK_78_750M, CLE266_PLL_78_750M, K800_PLL_78_750M,
-	 CX700_78_750M, VX855_78_750M},
-	{CLK_80_136M, CLE266_PLL_80_136M, K800_PLL_80_136M,
-	 CX700_80_136M, VX855_80_136M},
-	{CLK_83_375M, CLE266_PLL_83_375M, K800_PLL_83_375M,
-	 CX700_83_375M, VX855_83_375M},
-	{CLK_83_950M, CLE266_PLL_83_950M, K800_PLL_83_950M,
-	 CX700_83_950M, VX855_83_950M},
-	{CLK_84_750M, CLE266_PLL_84_750M, K800_PLL_84_750M,
-	 CX700_84_750M, VX855_84_750M},
-	{CLK_85_860M, CLE266_PLL_85_860M, K800_PLL_85_860M,
-	 CX700_85_860M, VX855_85_860M},
-	{CLK_88_750M, CLE266_PLL_88_750M, K800_PLL_88_750M,
-	 CX700_88_750M, VX855_88_750M},
-	{CLK_94_500M, CLE266_PLL_94_500M, K800_PLL_94_500M,
-	 CX700_94_500M, VX855_94_500M},
-	{CLK_97_750M, CLE266_PLL_97_750M, K800_PLL_97_750M,
-	 CX700_97_750M, VX855_97_750M},
-	{CLK_101_000M, CLE266_PLL_101_000M, K800_PLL_101_000M,
-	 CX700_101_000M, VX855_101_000M},
-	{CLK_106_500M, CLE266_PLL_106_500M, K800_PLL_106_500M,
-	 CX700_106_500M, VX855_106_500M},
-	{CLK_108_000M, CLE266_PLL_108_000M, K800_PLL_108_000M,
-	 CX700_108_000M, VX855_108_000M},
-	{CLK_113_309M, CLE266_PLL_113_309M, K800_PLL_113_309M,
-	 CX700_113_309M, VX855_113_309M},
-	{CLK_118_840M, CLE266_PLL_118_840M, K800_PLL_118_840M,
-	 CX700_118_840M, VX855_118_840M},
-	{CLK_119_000M, CLE266_PLL_119_000M, K800_PLL_119_000M,
-	 CX700_119_000M, VX855_119_000M},
-	{CLK_121_750M, CLE266_PLL_121_750M, K800_PLL_121_750M,
-	 CX700_121_750M, 0},
-	{CLK_125_104M, CLE266_PLL_125_104M, K800_PLL_125_104M,
-	 CX700_125_104M, 0},
-	{CLK_133_308M, CLE266_PLL_133_308M, K800_PLL_133_308M,
-	 CX700_133_308M, 0},
-	{CLK_135_000M, CLE266_PLL_135_000M, K800_PLL_135_000M,
-	 CX700_135_000M, VX855_135_000M},
-	{CLK_136_700M, CLE266_PLL_136_700M, K800_PLL_136_700M,
-	 CX700_136_700M, VX855_136_700M},
-	{CLK_138_400M, CLE266_PLL_138_400M, K800_PLL_138_400M,
-	 CX700_138_400M, VX855_138_400M},
-	{CLK_146_760M, CLE266_PLL_146_760M, K800_PLL_146_760M,
-	 CX700_146_760M, VX855_146_760M},
-	{CLK_153_920M, CLE266_PLL_153_920M, K800_PLL_153_920M,
-	 CX700_153_920M, VX855_153_920M},
-	{CLK_156_000M, CLE266_PLL_156_000M, K800_PLL_156_000M,
-	 CX700_156_000M, VX855_156_000M},
-	{CLK_157_500M, CLE266_PLL_157_500M, K800_PLL_157_500M,
-	 CX700_157_500M, VX855_157_500M},
-	{CLK_162_000M, CLE266_PLL_162_000M, K800_PLL_162_000M,
-	 CX700_162_000M, VX855_162_000M},
-	{CLK_187_000M, CLE266_PLL_187_000M, K800_PLL_187_000M,
-	 CX700_187_000M, VX855_187_000M},
-	{CLK_193_295M, CLE266_PLL_193_295M, K800_PLL_193_295M,
-	 CX700_193_295M, VX855_193_295M},
-	{CLK_202_500M, CLE266_PLL_202_500M, K800_PLL_202_500M,
-	 CX700_202_500M, VX855_202_500M},
-	{CLK_204_000M, CLE266_PLL_204_000M, K800_PLL_204_000M,
-	 CX700_204_000M, VX855_204_000M},
-	{CLK_218_500M, CLE266_PLL_218_500M, K800_PLL_218_500M,
-	 CX700_218_500M, VX855_218_500M},
-	{CLK_234_000M, CLE266_PLL_234_000M, K800_PLL_234_000M,
-	 CX700_234_000M, VX855_234_000M},
-	{CLK_267_250M, CLE266_PLL_267_250M, K800_PLL_267_250M,
-	 CX700_267_250M, VX855_267_250M},
-	{CLK_297_500M, CLE266_PLL_297_500M, K800_PLL_297_500M,
-	 CX700_297_500M, VX855_297_500M},
-	{CLK_74_481M, CLE266_PLL_74_481M, K800_PLL_74_481M,
-	 CX700_74_481M, VX855_74_481M},
-	{CLK_172_798M, CLE266_PLL_172_798M, K800_PLL_172_798M,
-	 CX700_172_798M, VX855_172_798M},
-	{CLK_122_614M, CLE266_PLL_122_614M, K800_PLL_122_614M,
-	 CX700_122_614M, VX855_122_614M},
-	{CLK_74_270M, CLE266_PLL_74_270M, K800_PLL_74_270M,
-	 CX700_74_270M, 0},
-	{CLK_148_500M, CLE266_PLL_148_500M, K800_PLL_148_500M,
-	 CX700_148_500M, VX855_148_500M}
+	{25175000,
+		{99, 7, 3},
+		{85, 3, 4},	/* ignoring bit difference: 0x00008000 */
+		{141, 5, 4},
+		{141, 5, 4} },
+	{29581000,
+		{33, 4, 2},
+		{66, 2, 4},	/* ignoring bit difference: 0x00808000 */
+		{166, 5, 4},	/* ignoring bit difference: 0x00008000 */
+		{165, 5, 4} },
+	{26880000,
+		{15, 4, 1},
+		{30, 2, 3},	/* ignoring bit difference: 0x00808000 */
+		{150, 5, 4},
+		{150, 5, 4} },
+	{31500000,
+		{53, 3, 3},	/* ignoring bit difference: 0x00008000 */
+		{141, 4, 4},	/* ignoring bit difference: 0x00008000 */
+		{176, 5, 4},
+		{176, 5, 4} },
+	{31728000,
+		{31, 7, 1},
+		{177, 5, 4},	/* ignoring bit difference: 0x00008000 */
+		{177, 5, 4},
+		{142, 4, 4} },
+	{32688000,
+		{73, 4, 3},
+		{146, 4, 4},	/* ignoring bit difference: 0x00008000 */
+		{183, 5, 4},
+		{146, 4, 4} },
+	{36000000,
+		{101, 5, 3},	/* ignoring bit difference: 0x00008000 */
+		{161, 4, 4},	/* ignoring bit difference: 0x00008000 */
+		{202, 5, 4},
+		{161, 4, 4} },
+	{40000000,
+		{89, 4, 3},
+		{89, 4, 3},	/* ignoring bit difference: 0x00008000 */
+		{112, 5, 3},
+		{112, 5, 3} },
+	{41291000,
+		{23, 4, 1},
+		{69, 3, 3},	/* ignoring bit difference: 0x00008000 */
+		{115, 5, 3},
+		{115, 5, 3} },
+	{43163000,
+		{121, 5, 3},
+		{121, 5, 3},	/* ignoring bit difference: 0x00008000 */
+		{121, 5, 3},
+		{121, 5, 3} },
+	{45250000,
+		{127, 5, 3},
+		{127, 5, 3},	/* ignoring bit difference: 0x00808000 */
+		{127, 5, 3},
+		{127, 5, 3} },
+	{46000000,
+		{90, 7, 2},
+		{103, 4, 3},	/* ignoring bit difference: 0x00008000 */
+		{129, 5, 3},
+		{103, 4, 3} },
+	{46996000,
+		{105, 4, 3},	/* ignoring bit difference: 0x00008000 */
+		{131, 5, 3},	/* ignoring bit difference: 0x00808000 */
+		{131, 5, 3},	/* ignoring bit difference: 0x00808000 */
+		{105, 4, 3} },
+	{48000000,
+		{67, 20, 0},
+		{134, 5, 3},	/* ignoring bit difference: 0x00808000 */
+		{134, 5, 3},
+		{134, 5, 3} },
+	{48875000,
+		{99, 29, 0},
+		{82, 3, 3},	/* ignoring bit difference: 0x00808000 */
+		{82, 3, 3},	/* ignoring bit difference: 0x00808000 */
+		{137, 5, 3} },
+	{49500000,
+		{83, 6, 2},
+		{83, 3, 3},	/* ignoring bit difference: 0x00008000 */
+		{138, 5, 3},
+		{83, 3, 3} },
+	{52406000,
+		{117, 4, 3},
+		{117, 4, 3},	/* ignoring bit difference: 0x00008000 */
+		{117, 4, 3},
+		{88, 3, 3} },
+	{52977000,
+		{37, 5, 1},
+		{148, 5, 3},	/* ignoring bit difference: 0x00808000 */
+		{148, 5, 3},
+		{148, 5, 3} },
+	{56250000,
+		{55, 7, 1},	/* ignoring bit difference: 0x00008000 */
+		{126, 4, 3},	/* ignoring bit difference: 0x00008000 */
+		{157, 5, 3},
+		{157, 5, 3} },
+	{57275000,
+		{0, 0, 0},
+		{2, 2, 0},
+		{2, 2, 0},
+		{157, 5, 3} },	/* ignoring bit difference: 0x00808000 */
+	{60466000,
+		{76, 9, 1},
+		{169, 5, 3},	/* ignoring bit difference: 0x00808000 */
+		{169, 5, 3},	/* FIXED: old = {72, 2, 3} */
+		{169, 5, 3} },
+	{61500000,
+		{86, 20, 0},
+		{172, 5, 3},	/* ignoring bit difference: 0x00808000 */
+		{172, 5, 3},
+		{172, 5, 3} },
+	{65000000,
+		{109, 6, 2},	/* ignoring bit difference: 0x00008000 */
+		{109, 3, 3},	/* ignoring bit difference: 0x00008000 */
+		{109, 3, 3},
+		{109, 3, 3} },
+	{65178000,
+		{91, 5, 2},
+		{182, 5, 3},	/* ignoring bit difference: 0x00808000 */
+		{109, 3, 3},
+		{182, 5, 3} },
+	{66750000,
+		{75, 4, 2},
+		{150, 4, 3},	/* ignoring bit difference: 0x00808000 */
+		{150, 4, 3},
+		{112, 3, 3} },
+	{68179000,
+		{19, 4, 0},
+		{114, 3, 3},	/* ignoring bit difference: 0x00008000 */
+		{190, 5, 3},
+		{191, 5, 3} },
+	{69924000,
+		{83, 17, 0},
+		{195, 5, 3},	/* ignoring bit difference: 0x00808000 */
+		{195, 5, 3},
+		{195, 5, 3} },
+	{70159000,
+		{98, 20, 0},
+		{196, 5, 3},	/* ignoring bit difference: 0x00808000 */
+		{196, 5, 3},
+		{195, 5, 3} },
+	{72000000,
+		{121, 24, 0},
+		{161, 4, 3},	/* ignoring bit difference: 0x00808000 */
+		{161, 4, 3},
+		{161, 4, 3} },
+	{78750000,
+		{33, 3, 1},
+		{66, 3, 2},	/* ignoring bit difference: 0x00008000 */
+		{110, 5, 2},
+		{110, 5, 2} },
+	{80136000,
+		{28, 5, 0},
+		{68, 3, 2},	/* ignoring bit difference: 0x00008000 */
+		{112, 5, 2},
+		{112, 5, 2} },
+	{83375000,
+		{93, 2, 3},
+		{93, 4, 2},	/* ignoring bit difference: 0x00800000 */
+		{93, 4, 2},	/* ignoring bit difference: 0x00800000 */
+		{117, 5, 2} },
+	{83950000,
+		{41, 7, 0},
+		{117, 5, 2},	/* ignoring bit difference: 0x00008000 */
+		{117, 5, 2},
+		{117, 5, 2} },
+	{84750000,
+		{118, 5, 2},
+		{118, 5, 2},	/* ignoring bit difference: 0x00808000 */
+		{118, 5, 2},
+		{118, 5, 2} },
+	{85860000,
+		{84, 7, 1},
+		{120, 5, 2},	/* ignoring bit difference: 0x00808000 */
+		{120, 5, 2},
+		{118, 5, 2} },
+	{88750000,
+		{31, 5, 0},
+		{124, 5, 2},	/* ignoring bit difference: 0x00808000 */
+		{174, 7, 2},	/* ignoring bit difference: 0x00808000 */
+		{124, 5, 2} },
+	{94500000,
+		{33, 5, 0},
+		{132, 5, 2},	/* ignoring bit difference: 0x00008000 */
+		{132, 5, 2},
+		{132, 5, 2} },
+	{97750000,
+		{82, 6, 1},
+		{137, 5, 2},	/* ignoring bit difference: 0x00808000 */
+		{137, 5, 2},
+		{137, 5, 2} },
+	{101000000,
+		{127, 9, 1},
+		{141, 5, 2},	/* ignoring bit difference: 0x00808000 */
+		{141, 5, 2},
+		{141, 5, 2} },
+	{106500000,
+		{119, 4, 2},
+		{119, 4, 2},	/* ignoring bit difference: 0x00808000 */
+		{119, 4, 2},
+		{149, 5, 2} },
+	{108000000,
+		{121, 4, 2},
+		{121, 4, 2},	/* ignoring bit difference: 0x00808000 */
+		{151, 5, 2},
+		{151, 5, 2} },
+	{113309000,
+		{95, 12, 0},
+		{95, 3, 2},	/* ignoring bit difference: 0x00808000 */
+		{95, 3, 2},
+		{159, 5, 2} },
+	{118840000,
+		{83, 5, 1},
+		{166, 5, 2},	/* ignoring bit difference: 0x00808000 */
+		{166, 5, 2},
+		{166, 5, 2} },
+	{119000000,
+		{108, 13, 0},
+		{133, 4, 2},	/* ignoring bit difference: 0x00808000 */
+		{133, 4, 2},
+		{167, 5, 2} },
+	{121750000,
+		{85, 5, 1},
+		{170, 5, 2},	/* ignoring bit difference: 0x00808000 */
+		{68, 2, 2},
+		{0, 0, 0} },
+	{125104000,
+		{53, 6, 0},	/* ignoring bit difference: 0x00008000 */
+		{106, 3, 2},	/* ignoring bit difference: 0x00008000 */
+		{175, 5, 2},
+		{0, 0, 0} },
+	{135000000,
+		{94, 5, 1},
+		{28, 3, 0},	/* ignoring bit difference: 0x00804000 */
+		{151, 4, 2},
+		{189, 5, 2} },
+	{136700000,
+		{115, 12, 0},
+		{191, 5, 2},	/* ignoring bit difference: 0x00808000 */
+		{191, 5, 2},
+		{191, 5, 2} },
+	{138400000,
+		{87, 9, 0},
+		{116, 3, 2},	/* ignoring bit difference: 0x00808000 */
+		{116, 3, 2},
+		{194, 5, 2} },
+	{146760000,
+		{103, 5, 1},
+		{206, 5, 2},	/* ignoring bit difference: 0x00808000 */
+		{206, 5, 2},
+		{206, 5, 2} },
+	{153920000,
+		{86, 8, 0},
+		{86, 4, 1},	/* ignoring bit difference: 0x00808000 */
+		{86, 4, 1},
+		{86, 4, 1} },	/* FIXED: old = {84, 2, 1} */
+	{156000000,
+		{109, 5, 1},
+		{109, 5, 1},	/* ignoring bit difference: 0x00808000 */
+		{109, 5, 1},
+		{108, 5, 1} },
+	{157500000,
+		{55, 5, 0},	/* ignoring bit difference: 0x00008000 */
+		{22, 2, 0},	/* ignoring bit difference: 0x00802000 */
+		{110, 5, 1},
+		{110, 5, 1} },
+	{162000000,
+		{113, 5, 1},
+		{113, 5, 1},	/* ignoring bit difference: 0x00808000 */
+		{113, 5, 1},
+		{113, 5, 1} },
+	{187000000,
+		{118, 9, 0},
+		{131, 5, 1},	/* ignoring bit difference: 0x00808000 */
+		{131, 5, 1},
+		{131, 5, 1} },
+	{193295000,
+		{108, 8, 0},
+		{81, 3, 1},	/* ignoring bit difference: 0x00808000 */
+		{135, 5, 1},
+		{135, 5, 1} },
+	{202500000,
+		{99, 7, 0},
+		{85, 3, 1},	/* ignoring bit difference: 0x00808000 */
+		{142, 5, 1},
+		{142, 5, 1} },
+	{204000000,
+		{100, 7, 0},
+		{143, 5, 1},	/* ignoring bit difference: 0x00808000 */
+		{143, 5, 1},
+		{143, 5, 1} },
+	{218500000,
+		{92, 6, 0},
+		{153, 5, 1},	/* ignoring bit difference: 0x00808000 */
+		{153, 5, 1},
+		{153, 5, 1} },
+	{234000000,
+		{98, 6, 0},
+		{98, 3, 1},	/* ignoring bit difference: 0x00008000 */
+		{98, 3, 1},
+		{164, 5, 1} },
+	{267250000,
+		{112, 6, 0},
+		{112, 3, 1},	/* ignoring bit difference: 0x00808000 */
+		{187, 5, 1},
+		{187, 5, 1} },
+	{297500000,
+		{102, 5, 0},	/* ignoring bit difference: 0x00008000 */
+		{166, 4, 1},	/* ignoring bit difference: 0x00008000 */
+		{208, 5, 1},
+		{208, 5, 1} },
+	{74481000,
+		{26, 5, 0},
+		{125, 3, 3},	/* ignoring bit difference: 0x00808000 */
+		{208, 5, 3},
+		{209, 5, 3} },
+	{172798000,
+		{121, 5, 1},
+		{121, 5, 1},	/* ignoring bit difference: 0x00808000 */
+		{121, 5, 1},
+		{121, 5, 1} },
+	{122614000,
+		{60, 7, 0},
+		{137, 4, 2},	/* ignoring bit difference: 0x00808000 */
+		{137, 4, 2},
+		{172, 5, 2} },
+	{74270000,
+		{83, 8, 1},
+		{208, 5, 3},
+		{208, 5, 3},
+		{0, 0, 0} },
+	{148500000,
+		{83, 8, 0},
+		{208, 5, 2},
+		{166, 4, 2},
+		{208, 5, 2} }
 };
 
 static struct fifo_depth_select display_fifo_depth_reg = {
@@ -1360,40 +1558,70 @@ void viafb_load_FIFO_reg(int set_iga, int hor_active, int ver_active)
 
 }
 
+static u32 cle266_encode_pll(struct pll_config pll)
+{
+	return (pll.multiplier << 8)
+		| (pll.rshift << 6)
+		| pll.divisor;
+}
+
+static u32 k800_encode_pll(struct pll_config pll)
+{
+	return ((pll.divisor - 2) << 16)
+		| (pll.rshift << 10)
+		| (pll.multiplier - 2);
+}
+
+static u32 vx855_encode_pll(struct pll_config pll)
+{
+	return (pll.divisor << 16)
+		| (pll.rshift << 10)
+		| pll.multiplier;
+}
+
 u32 viafb_get_clk_value(int clk)
 {
-	int i;
+	u32 value = 0;
+	int i = 0;
 
-	for (i = 0; i < NUM_TOTAL_PLL_TABLE; i++) {
-		if (clk == pll_value[i].clk) {
-			switch (viaparinfo->chip_info->gfx_chip_name) {
-			case UNICHROME_CLE266:
-			case UNICHROME_K400:
-				return pll_value[i].cle266_pll;
-
-			case UNICHROME_K800:
-			case UNICHROME_PM800:
-			case UNICHROME_CN700:
-				return pll_value[i].k800_pll;
-
-			case UNICHROME_CX700:
-			case UNICHROME_K8M890:
-			case UNICHROME_P4M890:
-			case UNICHROME_P4M900:
-			case UNICHROME_VX800:
-				return pll_value[i].cx700_pll;
-			case UNICHROME_VX855:
-				return pll_value[i].vx855_pll;
-			}
+	while (i < NUM_TOTAL_PLL_TABLE && clk != pll_value[i].clk)
+		i++;
+
+	if (i == NUM_TOTAL_PLL_TABLE) {
+		printk(KERN_WARNING "viafb_get_clk_value: PLL lookup failed!");
+	} else {
+		switch (viaparinfo->chip_info->gfx_chip_name) {
+		case UNICHROME_CLE266:
+		case UNICHROME_K400:
+			value = cle266_encode_pll(pll_value[i].cle266_pll);
+			break;
+
+		case UNICHROME_K800:
+		case UNICHROME_PM800:
+		case UNICHROME_CN700:
+			value = k800_encode_pll(pll_value[i].k800_pll);
+			break;
+
+		case UNICHROME_CX700:
+		case UNICHROME_CN750:
+		case UNICHROME_K8M890:
+		case UNICHROME_P4M890:
+		case UNICHROME_P4M900:
+		case UNICHROME_VX800:
+			value = k800_encode_pll(pll_value[i].cx700_pll);
+			break;
+
+		case UNICHROME_VX855:
+			value = vx855_encode_pll(pll_value[i].vx855_pll);
+			break;
 		}
 	}
 
-	DEBUG_MSG(KERN_INFO "Can't find match PLL value\n\n");
-	return 0;
+	return value;
 }
 
 /* Set VCLK*/
-void viafb_set_vclock(u32 CLK, int set_iga)
+void viafb_set_vclock(u32 clk, int set_iga)
 {
 	/* H.W. Reset : ON */
 	viafb_write_reg_mask(CR17, VIACR, 0x00, BIT7);
@@ -1403,26 +1631,23 @@ void viafb_set_vclock(u32 CLK, int set_iga)
 		switch (viaparinfo->chip_info->gfx_chip_name) {
 		case UNICHROME_CLE266:
 		case UNICHROME_K400:
-			viafb_write_reg(SR46, VIASR, CLK / 0x100);
-			viafb_write_reg(SR47, VIASR, CLK % 0x100);
+			via_write_reg(VIASR, SR46, (clk & 0x00FF));
+			via_write_reg(VIASR, SR47, (clk & 0xFF00) >> 8);
 			break;
 
 		case UNICHROME_K800:
 		case UNICHROME_PM800:
 		case UNICHROME_CN700:
 		case UNICHROME_CX700:
+		case UNICHROME_CN750:
 		case UNICHROME_K8M890:
 		case UNICHROME_P4M890:
 		case UNICHROME_P4M900:
 		case UNICHROME_VX800:
 		case UNICHROME_VX855:
-			viafb_write_reg(SR44, VIASR, CLK / 0x10000);
-			DEBUG_MSG(KERN_INFO "\nSR44=%x", CLK / 0x10000);
-			viafb_write_reg(SR45, VIASR, (CLK & 0xFFFF) / 0x100);
-			DEBUG_MSG(KERN_INFO "\nSR45=%x",
-				  (CLK & 0xFFFF) / 0x100);
-			viafb_write_reg(SR46, VIASR, CLK % 0x100);
-			DEBUG_MSG(KERN_INFO "\nSR46=%x", CLK % 0x100);
+			via_write_reg(VIASR, SR44, (clk & 0x0000FF));
+			via_write_reg(VIASR, SR45, (clk & 0x00FF00) >> 8);
+			via_write_reg(VIASR, SR46, (clk & 0xFF0000) >> 16);
 			break;
 		}
 	}
@@ -1432,22 +1657,23 @@ void viafb_set_vclock(u32 CLK, int set_iga)
 		switch (viaparinfo->chip_info->gfx_chip_name) {
 		case UNICHROME_CLE266:
 		case UNICHROME_K400:
-			viafb_write_reg(SR44, VIASR, CLK / 0x100);
-			viafb_write_reg(SR45, VIASR, CLK % 0x100);
+			via_write_reg(VIASR, SR44, (clk & 0x00FF));
+			via_write_reg(VIASR, SR45, (clk & 0xFF00) >> 8);
 			break;
 
 		case UNICHROME_K800:
 		case UNICHROME_PM800:
 		case UNICHROME_CN700:
 		case UNICHROME_CX700:
+		case UNICHROME_CN750:
 		case UNICHROME_K8M890:
 		case UNICHROME_P4M890:
 		case UNICHROME_P4M900:
 		case UNICHROME_VX800:
 		case UNICHROME_VX855:
-			viafb_write_reg(SR4A, VIASR, CLK / 0x10000);
-			viafb_write_reg(SR4B, VIASR, (CLK & 0xFFFF) / 0x100);
-			viafb_write_reg(SR4C, VIASR, CLK % 0x100);
+			via_write_reg(VIASR, SR4A, (clk & 0x0000FF));
+			via_write_reg(VIASR, SR4B, (clk & 0x00FF00) >> 8);
+			via_write_reg(VIASR, SR4C, (clk & 0xFF0000) >> 16);
 			break;
 		}
 	}
diff --git a/drivers/video/via/hw.h b/drivers/video/via/hw.h
index a109de37981..c4439989529 100644
--- a/drivers/video/via/hw.h
+++ b/drivers/video/via/hw.h
@@ -700,12 +700,18 @@ struct _lcd_scaling_factor {
 	struct _lcd_ver_scaling_factor lcd_ver_scaling_factor;
 };
 
+struct pll_config {
+	u16 multiplier;
+	u8 divisor;
+	u8 rshift;
+};
+
 struct pll_map {
 	u32 clk;
-	u32 cle266_pll;
-	u32 k800_pll;
-	u32 cx700_pll;
-	u32 vx855_pll;
+	struct pll_config cle266_pll;
+	struct pll_config k800_pll;
+	struct pll_config cx700_pll;
+	struct pll_config vx855_pll;
 };
 
 struct rgbLUT {
diff --git a/drivers/video/via/share.h b/drivers/video/via/share.h
index 7f0de7f006a..2cbe1031b42 100644
--- a/drivers/video/via/share.h
+++ b/drivers/video/via/share.h
@@ -631,7 +631,6 @@
 #define CLK_25_175M     25175000
 #define CLK_26_880M     26880000
 #define CLK_29_581M     29581000
-#define CLK_31_490M     31490000
 #define CLK_31_500M     31500000
 #define CLK_31_728M     31728000
 #define CLK_32_668M     32688000
@@ -676,7 +675,6 @@
 #define CLK_119_000M    119000000
 #define CLK_121_750M    121750000	/* 121.704MHz */
 #define CLK_125_104M    125104000
-#define CLK_133_308M    133308000
 #define CLK_135_000M    135000000
 #define CLK_136_700M    136700000
 #define CLK_138_400M    138400000
@@ -699,313 +697,6 @@
 #define CLK_172_798M    172798000
 #define CLK_122_614M    122614000
 
-/* CLE266 PLL value
-*/
-#define CLE266_PLL_25_175M     0x0000C763
-#define CLE266_PLL_26_880M     0x0000440F
-#define CLE266_PLL_29_581M     0x00008421
-#define CLE266_PLL_31_490M     0x00004721
-#define CLE266_PLL_31_500M     0x0000C3B5
-#define CLE266_PLL_31_728M     0x0000471F
-#define CLE266_PLL_32_668M     0x0000C449
-#define CLE266_PLL_36_000M     0x0000C5E5
-#define CLE266_PLL_40_000M     0x0000C459
-#define CLE266_PLL_41_291M     0x00004417
-#define CLE266_PLL_43_163M     0x0000C579
-#define CLE266_PLL_45_250M     0x0000C57F	/* 45.46MHz */
-#define CLE266_PLL_46_000M     0x0000875A
-#define CLE266_PLL_46_996M     0x0000C4E9
-#define CLE266_PLL_48_000M     0x00001443
-#define CLE266_PLL_48_875M     0x00001D63
-#define CLE266_PLL_49_500M     0x00008653
-#define CLE266_PLL_52_406M     0x0000C475
-#define CLE266_PLL_52_977M     0x00004525
-#define CLE266_PLL_56_250M     0x000047B7
-#define CLE266_PLL_60_466M     0x0000494C
-#define CLE266_PLL_61_500M     0x00001456
-#define CLE266_PLL_65_000M     0x000086ED
-#define CLE266_PLL_65_178M     0x0000855B
-#define CLE266_PLL_66_750M     0x0000844B	/* 67.116MHz */
-#define CLE266_PLL_68_179M     0x00000413
-#define CLE266_PLL_69_924M     0x00001153
-#define CLE266_PLL_70_159M     0x00001462
-#define CLE266_PLL_72_000M     0x00001879
-#define CLE266_PLL_74_270M     0x00004853
-#define CLE266_PLL_78_750M     0x00004321
-#define CLE266_PLL_80_136M     0x0000051C
-#define CLE266_PLL_83_375M     0x0000C25D
-#define CLE266_PLL_83_950M     0x00000729
-#define CLE266_PLL_84_750M     0x00008576	/* 84.537MHz */
-#define CLE266_PLL_85_860M     0x00004754
-#define CLE266_PLL_88_750M     0x0000051F
-#define CLE266_PLL_94_500M     0x00000521
-#define CLE266_PLL_97_750M     0x00004652
-#define CLE266_PLL_101_000M    0x0000497F
-#define CLE266_PLL_106_500M    0x00008477	/* 106.491463 MHz */
-#define CLE266_PLL_108_000M    0x00008479
-#define CLE266_PLL_113_309M    0x00000C5F
-#define CLE266_PLL_118_840M    0x00004553
-#define CLE266_PLL_119_000M    0x00000D6C
-#define CLE266_PLL_121_750M    0x00004555	/* 121.704MHz */
-#define CLE266_PLL_125_104M    0x000006B5
-#define CLE266_PLL_133_308M    0x0000465F
-#define CLE266_PLL_135_000M    0x0000455E
-#define CLE266_PLL_136_700M    0x00000C73
-#define CLE266_PLL_138_400M    0x00000957
-#define CLE266_PLL_146_760M    0x00004567
-#define CLE266_PLL_148_500M    0x00000853
-#define CLE266_PLL_153_920M    0x00000856
-#define CLE266_PLL_156_000M    0x0000456D
-#define CLE266_PLL_157_500M    0x000005B7
-#define CLE266_PLL_162_000M    0x00004571
-#define CLE266_PLL_187_000M    0x00000976
-#define CLE266_PLL_193_295M    0x0000086C
-#define CLE266_PLL_202_500M    0x00000763
-#define CLE266_PLL_204_000M    0x00000764
-#define CLE266_PLL_218_500M    0x0000065C
-#define CLE266_PLL_234_000M    0x00000662
-#define CLE266_PLL_267_250M    0x00000670
-#define CLE266_PLL_297_500M    0x000005E6
-#define CLE266_PLL_74_481M     0x0000051A
-#define CLE266_PLL_172_798M    0x00004579
-#define CLE266_PLL_122_614M    0x0000073C
-
-/* K800 PLL value
-*/
-#define K800_PLL_25_175M     0x00539001
-#define K800_PLL_26_880M     0x001C8C80
-#define K800_PLL_29_581M     0x00409080
-#define K800_PLL_31_490M     0x006F9001
-#define K800_PLL_31_500M     0x008B9002
-#define K800_PLL_31_728M     0x00AF9003
-#define K800_PLL_32_668M     0x00909002
-#define K800_PLL_36_000M     0x009F9002
-#define K800_PLL_40_000M     0x00578C02
-#define K800_PLL_41_291M     0x00438C01
-#define K800_PLL_43_163M     0x00778C03
-#define K800_PLL_45_250M     0x007D8C83	/* 45.46MHz */
-#define K800_PLL_46_000M     0x00658C02
-#define K800_PLL_46_996M     0x00818C83
-#define K800_PLL_48_000M     0x00848C83
-#define K800_PLL_48_875M     0x00508C81
-#define K800_PLL_49_500M     0x00518C01
-#define K800_PLL_52_406M     0x00738C02
-#define K800_PLL_52_977M     0x00928C83
-#define K800_PLL_56_250M     0x007C8C02
-#define K800_PLL_60_466M     0x00A78C83
-#define K800_PLL_61_500M     0x00AA8C83
-#define K800_PLL_65_000M     0x006B8C01
-#define K800_PLL_65_178M     0x00B48C83
-#define K800_PLL_66_750M     0x00948C82	/* 67.116MHz */
-#define K800_PLL_68_179M     0x00708C01
-#define K800_PLL_69_924M     0x00C18C83
-#define K800_PLL_70_159M     0x00C28C83
-#define K800_PLL_72_000M     0x009F8C82
-#define K800_PLL_74_270M     0x00ce0c03
-#define K800_PLL_78_750M     0x00408801
-#define K800_PLL_80_136M     0x00428801
-#define K800_PLL_83_375M     0x005B0882
-#define K800_PLL_83_950M     0x00738803
-#define K800_PLL_84_750M     0x00748883	/* 84.477MHz */
-#define K800_PLL_85_860M     0x00768883
-#define K800_PLL_88_750M     0x007A8883
-#define K800_PLL_94_500M     0x00828803
-#define K800_PLL_97_750M     0x00878883
-#define K800_PLL_101_000M    0x008B8883
-#define K800_PLL_106_500M    0x00758882	/* 106.491463 MHz */
-#define K800_PLL_108_000M    0x00778882
-#define K800_PLL_113_309M    0x005D8881
-#define K800_PLL_118_840M    0x00A48883
-#define K800_PLL_119_000M    0x00838882
-#define K800_PLL_121_750M    0x00A88883	/* 121.704MHz */
-#define K800_PLL_125_104M    0x00688801
-#define K800_PLL_133_308M    0x005D8801
-#define K800_PLL_135_000M    0x001A4081
-#define K800_PLL_136_700M    0x00BD8883
-#define K800_PLL_138_400M    0x00728881
-#define K800_PLL_146_760M    0x00CC8883
-#define K800_PLL_148_500M    0x00ce0803
-#define K800_PLL_153_920M    0x00548482
-#define K800_PLL_156_000M    0x006B8483
-#define K800_PLL_157_500M    0x00142080
-#define K800_PLL_162_000M    0x006F8483
-#define K800_PLL_187_000M    0x00818483
-#define K800_PLL_193_295M    0x004F8481
-#define K800_PLL_202_500M    0x00538481
-#define K800_PLL_204_000M    0x008D8483
-#define K800_PLL_218_500M    0x00978483
-#define K800_PLL_234_000M    0x00608401
-#define K800_PLL_267_250M    0x006E8481
-#define K800_PLL_297_500M    0x00A48402
-#define K800_PLL_74_481M     0x007B8C81
-#define K800_PLL_172_798M    0x00778483
-#define K800_PLL_122_614M    0x00878882
-
-/* PLL for VT3324 */
-#define CX700_25_175M     0x008B1003
-#define CX700_26_719M     0x00931003
-#define CX700_26_880M     0x00941003
-#define CX700_29_581M     0x00A49003
-#define CX700_31_490M     0x00AE1003
-#define CX700_31_500M     0x00AE1003
-#define CX700_31_728M     0x00AF1003
-#define CX700_32_668M     0x00B51003
-#define CX700_36_000M     0x00C81003
-#define CX700_40_000M     0x006E0C03
-#define CX700_41_291M     0x00710C03
-#define CX700_43_163M     0x00770C03
-#define CX700_45_250M     0x007D0C03	/* 45.46MHz */
-#define CX700_46_000M     0x007F0C03
-#define CX700_46_996M     0x00818C83
-#define CX700_48_000M     0x00840C03
-#define CX700_48_875M     0x00508C81
-#define CX700_49_500M     0x00880C03
-#define CX700_52_406M     0x00730C02
-#define CX700_52_977M     0x00920C03
-#define CX700_56_250M     0x009B0C03
-#define CX700_60_466M     0x00460C00
-#define CX700_61_500M     0x00AA0C03
-#define CX700_65_000M     0x006B0C01
-#define CX700_65_178M     0x006B0C01
-#define CX700_66_750M     0x00940C02	/*67.116MHz */
-#define CX700_68_179M     0x00BC0C03
-#define CX700_69_924M     0x00C10C03
-#define CX700_70_159M     0x00C20C03
-#define CX700_72_000M     0x009F0C02
-#define CX700_74_270M     0x00CE0C03
-#define CX700_74_481M     0x00CE0C03
-#define CX700_78_750M     0x006C0803
-#define CX700_80_136M     0x006E0803
-#define CX700_83_375M     0x005B0882
-#define CX700_83_950M     0x00730803
-#define CX700_84_750M     0x00740803	/* 84.537Mhz */
-#define CX700_85_860M     0x00760803
-#define CX700_88_750M     0x00AC8885
-#define CX700_94_500M     0x00820803
-#define CX700_97_750M     0x00870803
-#define CX700_101_000M    0x008B0803
-#define CX700_106_500M    0x00750802
-#define CX700_108_000M    0x00950803
-#define CX700_113_309M    0x005D0801
-#define CX700_118_840M    0x00A40803
-#define CX700_119_000M    0x00830802
-#define CX700_121_750M    0x00420800	/* 121.704MHz */
-#define CX700_125_104M    0x00AD0803
-#define CX700_133_308M    0x00930802
-#define CX700_135_000M    0x00950802
-#define CX700_136_700M    0x00BD0803
-#define CX700_138_400M    0x00720801
-#define CX700_146_760M    0x00CC0803
-#define CX700_148_500M    0x00a40802
-#define CX700_153_920M    0x00540402
-#define CX700_156_000M    0x006B0403
-#define CX700_157_500M    0x006C0403
-#define CX700_162_000M    0x006F0403
-#define CX700_172_798M    0x00770403
-#define CX700_187_000M    0x00810403
-#define CX700_193_295M    0x00850403
-#define CX700_202_500M    0x008C0403
-#define CX700_204_000M    0x008D0403
-#define CX700_218_500M    0x00970403
-#define CX700_234_000M    0x00600401
-#define CX700_267_250M    0x00B90403
-#define CX700_297_500M    0x00CE0403
-#define CX700_122_614M    0x00870802
-
-/* PLL for VX855 */
-#define VX855_22_000M     0x007B1005
-#define VX855_25_175M     0x008D1005
-#define VX855_26_719M     0x00961005
-#define VX855_26_880M     0x00961005
-#define VX855_27_000M     0x00971005
-#define VX855_29_581M     0x00A51005
-#define VX855_29_829M     0x00641003
-#define VX855_31_490M     0x00B01005
-#define VX855_31_500M     0x00B01005
-#define VX855_31_728M     0x008E1004
-#define VX855_32_668M     0x00921004
-#define VX855_36_000M     0x00A11004
-#define VX855_40_000M     0x00700C05
-#define VX855_41_291M     0x00730C05
-#define VX855_43_163M     0x00790C05
-#define VX855_45_250M     0x007F0C05      /* 45.46MHz */
-#define VX855_46_000M     0x00670C04
-#define VX855_46_996M     0x00690C04
-#define VX855_48_000M     0x00860C05
-#define VX855_48_875M     0x00890C05
-#define VX855_49_500M     0x00530C03
-#define VX855_52_406M     0x00580C03
-#define VX855_52_977M     0x00940C05
-#define VX855_56_250M     0x009D0C05
-#define VX855_57_275M     0x009D8C85    /* Used by XO panel */
-#define VX855_60_466M     0x00A90C05
-#define VX855_61_500M     0x00AC0C05
-#define VX855_65_000M     0x006D0C03
-#define VX855_65_178M     0x00B60C05
-#define VX855_66_750M     0x00700C03    /*67.116MHz */
-#define VX855_67_295M     0x00BC0C05
-#define VX855_68_179M     0x00BF0C05
-#define VX855_68_369M     0x00BF0C05
-#define VX855_69_924M     0x00C30C05
-#define VX855_70_159M     0x00C30C05
-#define VX855_72_000M     0x00A10C04
-#define VX855_73_023M     0x00CC0C05
-#define VX855_74_481M     0x00D10C05
-#define VX855_78_750M     0x006E0805
-#define VX855_79_466M     0x006F0805
-#define VX855_80_136M     0x00700805
-#define VX855_81_627M     0x00720805
-#define VX855_83_375M     0x00750805
-#define VX855_83_527M     0x00750805
-#define VX855_83_950M     0x00750805
-#define VX855_84_537M     0x00760805
-#define VX855_84_750M     0x00760805     /* 84.537Mhz */
-#define VX855_85_500M     0x00760805        /* 85.909080 MHz*/
-#define VX855_85_860M     0x00760805
-#define VX855_85_909M     0x00760805
-#define VX855_88_750M     0x007C0805
-#define VX855_89_489M     0x007D0805
-#define VX855_94_500M     0x00840805
-#define VX855_96_648M     0x00870805
-#define VX855_97_750M     0x00890805
-#define VX855_101_000M    0x008D0805
-#define VX855_106_500M    0x00950805
-#define VX855_108_000M    0x00970805
-#define VX855_110_125M    0x00990805
-#define VX855_112_000M    0x009D0805
-#define VX855_113_309M    0x009F0805
-#define VX855_115_000M    0x00A10805
-#define VX855_118_840M    0x00A60805
-#define VX855_119_000M    0x00A70805
-#define VX855_121_750M    0x00AA0805       /* 121.704MHz */
-#define VX855_122_614M    0x00AC0805
-#define VX855_126_266M    0x00B10805
-#define VX855_130_250M    0x00B60805      /* 130.250 */
-#define VX855_135_000M    0x00BD0805
-#define VX855_136_700M    0x00BF0805
-#define VX855_137_750M    0x00C10805
-#define VX855_138_400M    0x00C20805
-#define VX855_144_300M    0x00CA0805
-#define VX855_146_760M    0x00CE0805
-#define VX855_148_500M	  0x00D00805
-#define VX855_153_920M    0x00540402
-#define VX855_156_000M    0x006C0405
-#define VX855_156_867M    0x006E0405
-#define VX855_157_500M    0x006E0405
-#define VX855_162_000M    0x00710405
-#define VX855_172_798M    0x00790405
-#define VX855_187_000M    0x00830405
-#define VX855_193_295M    0x00870405
-#define VX855_202_500M    0x008E0405
-#define VX855_204_000M    0x008F0405
-#define VX855_218_500M    0x00990405
-#define VX855_229_500M    0x00A10405
-#define VX855_234_000M    0x00A40405
-#define VX855_267_250M    0x00BB0405
-#define VX855_297_500M    0x00D00405
-#define VX855_339_500M    0x00770005
-#define VX855_340_772M    0x00770005
-
 
 /* Definition CRTC Timing Index */
 #define H_TOTAL_INDEX               0
-- 
cgit v1.2.3


From 65123c68d16257e7d21b742e9d80df947c891a6d Mon Sep 17 00:00:00 2001
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Date: Tue, 13 Jul 2010 17:58:06 +0000
Subject: viafb: update fix before calculating depth

viafb: update fix before calculating depth

As the depth calculation depends on information in fix it is saner to
do the update first.
No runtime change expected as the value visual in fix used never
changes to MONO.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Joseph Chan <JosephChan@via.com.tw>
---
 drivers/video/via/viafbdev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index 1082541358f..ab395526455 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -234,6 +234,7 @@ static int viafb_set_par(struct fb_info *info)
 	struct VideoModeTable *vmode_entry, *vmode_entry1 = NULL;
 	DEBUG_MSG(KERN_INFO "viafb_set_par!\n");
 
+	viafb_update_fix(info);
 	viapar->depth = fb_get_color_depth(&info->var, &info->fix);
 	viafb_update_device_setting(viafbinfo->var.xres, viafbinfo->var.yres,
 		viafbinfo->var.bits_per_pixel, viafb_refresh, 0);
@@ -257,7 +258,6 @@ static int viafb_set_par(struct fb_info *info)
 	}
 
 	if (vmode_entry) {
-		viafb_update_fix(info);
 		if (viafb_dual_fb && viapar->iga_path == IGA2)
 			viafb_bpp1 = info->var.bits_per_pixel;
 		else
-- 
cgit v1.2.3


From 45f85f4a01b6215a9d75008d0a999cb7795680a3 Mon Sep 17 00:00:00 2001
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Date: Tue, 13 Jul 2010 19:19:17 +0000
Subject: viafb: remove ioctls which break the framebuffer interface

viafb: remove ioctls which break the framebuffer interface

The ioctls VIAFB_SET_DEVICE, VIAFB_SET_DEVICE_INFO and
VIAFB_SET_SECOND_MODE are removed because they prevent a clean
framebuffer driver because they modify the hardware and/or the
internal structures.
There are no known applications using these ioctls so no breakage is
expected. Additionaly the main functionality was duplicating the
framebuffer interface so there really should not exist any user.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Joseph Chan <JosephChan@via.com.tw>
---
 drivers/video/via/ioctl.h    |   3 -
 drivers/video/via/viafbdev.c | 251 -------------------------------------------
 2 files changed, 254 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/via/ioctl.h b/drivers/video/via/ioctl.h
index c430fa23008..6010d10b59e 100644
--- a/drivers/video/via/ioctl.h
+++ b/drivers/video/via/ioctl.h
@@ -35,11 +35,9 @@
 #define VIAFB_GET_SAMM_INFO		0x56494107	/* 'VIA\07' */
 #define VIAFB_TURN_ON_OUTPUT_DEVICE     0x56494108	/* 'VIA\08' */
 #define VIAFB_TURN_OFF_OUTPUT_DEVICE    0x56494109	/* 'VIA\09' */
-#define VIAFB_SET_DEVICE		0x5649410A
 #define VIAFB_GET_DEVICE		0x5649410B
 #define VIAFB_GET_DRIVER_VERSION	0x56494112	/* 'VIA\12' */
 #define VIAFB_GET_CHIP_INFO		0x56494113	/* 'VIA\13' */
-#define VIAFB_SET_DEVICE_INFO           0x56494114
 #define VIAFB_GET_DEVICE_INFO           0x56494115
 
 #define VIAFB_GET_DEVICE_SUPPORT	0x56494118
@@ -50,7 +48,6 @@
 #define VIAFB_GET_GAMMA_LUT		0x56494124
 #define VIAFB_SET_GAMMA_LUT		0x56494125
 #define VIAFB_GET_GAMMA_SUPPORT_STATE	0x56494126
-#define VIAFB_SET_SECOND_MODE		0x56494129
 #define VIAFB_SYNC_SURFACE		0x56494130
 #define VIAFB_GET_DRIVER_CAPS		0x56494131
 #define VIAFB_GET_IGA_SCALING_INFO	0x56494132
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index ab395526455..1128d516c8a 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -49,11 +49,6 @@ char *viafb_active_dev;
 char *viafb_lcd_port = "";
 char *viafb_dvi_port = "";
 
-static void viafb_set_device(struct device_t active_dev);
-static int apply_device_setting(struct viafb_ioctl_setting setting_info,
-			 struct fb_info *info);
-static void apply_second_mode_setting(struct fb_var_screeninfo
-	*sec_var);
 static void retrieve_device_setting(struct viafb_ioctl_setting
 	*setting_info);
 static int viafb_pan_display(struct fb_var_screeninfo *var,
@@ -478,13 +473,6 @@ static int viafb_ioctl(struct fb_info *info, u_int cmd, u_long arg)
 		if (gpu32 & LCD_Device)
 			viafb_lcd_disable();
 		break;
-	case VIAFB_SET_DEVICE:
-		if (copy_from_user(&u.active_dev, (void *)argp,
-			sizeof(u.active_dev)))
-			return -EFAULT;
-		viafb_set_device(u.active_dev);
-		viafb_set_par(info);
-		break;
 	case VIAFB_GET_DEVICE:
 		u.active_dev.crt = viafb_CRT_ON;
 		u.active_dev.dvi = viafb_DVI_ON;
@@ -527,21 +515,6 @@ static int viafb_ioctl(struct fb_info *info, u_int cmd, u_long arg)
 
 		break;
 
-	case VIAFB_SET_DEVICE_INFO:
-		if (copy_from_user(&u.viafb_setting,
-			argp, sizeof(u.viafb_setting)))
-			return -EFAULT;
-		if (apply_device_setting(u.viafb_setting, info) < 0)
-			return -EINVAL;
-
-		break;
-
-	case VIAFB_SET_SECOND_MODE:
-		if (copy_from_user(&u.sec_var, argp, sizeof(u.sec_var)))
-			return -EFAULT;
-		apply_second_mode_setting(&u.sec_var);
-		break;
-
 	case VIAFB_GET_DEVICE_INFO:
 
 		retrieve_device_setting(&u.viafb_setting);
@@ -913,112 +886,6 @@ static int viafb_sync(struct fb_info *info)
 	return 0;
 }
 
-static void check_available_device_to_enable(int device_id)
-{
-	int device_num = 0;
-
-	/* Initialize: */
-	viafb_CRT_ON = STATE_OFF;
-	viafb_DVI_ON = STATE_OFF;
-	viafb_LCD_ON = STATE_OFF;
-	viafb_LCD2_ON = STATE_OFF;
-	viafb_DeviceStatus = None_Device;
-
-	if ((device_id & CRT_Device) && (device_num < MAX_ACTIVE_DEV_NUM)) {
-		viafb_CRT_ON = STATE_ON;
-		device_num++;
-		viafb_DeviceStatus |= CRT_Device;
-	}
-
-	if ((device_id & DVI_Device) && (device_num < MAX_ACTIVE_DEV_NUM)) {
-		viafb_DVI_ON = STATE_ON;
-		device_num++;
-		viafb_DeviceStatus |= DVI_Device;
-	}
-
-	if ((device_id & LCD_Device) && (device_num < MAX_ACTIVE_DEV_NUM)) {
-		viafb_LCD_ON = STATE_ON;
-		device_num++;
-		viafb_DeviceStatus |= LCD_Device;
-	}
-
-	if ((device_id & LCD2_Device) && (device_num < MAX_ACTIVE_DEV_NUM)) {
-		viafb_LCD2_ON = STATE_ON;
-		device_num++;
-		viafb_DeviceStatus |= LCD2_Device;
-	}
-
-	if (viafb_DeviceStatus == None_Device) {
-		/* Use CRT as default active device: */
-		viafb_CRT_ON = STATE_ON;
-		viafb_DeviceStatus = CRT_Device;
-	}
-	DEBUG_MSG(KERN_INFO "Device Status:%x", viafb_DeviceStatus);
-}
-
-static void viafb_set_device(struct device_t active_dev)
-{
-	/* Check available device to enable: */
-	int device_id = None_Device;
-	if (active_dev.crt)
-		device_id |= CRT_Device;
-	if (active_dev.dvi)
-		device_id |= DVI_Device;
-	if (active_dev.lcd)
-		device_id |= LCD_Device;
-
-	check_available_device_to_enable(device_id);
-
-	/* Check property of LCD: */
-	if (viafb_LCD_ON) {
-		if (active_dev.lcd_dsp_cent) {
-			viaparinfo->lvds_setting_info->display_method =
-				viafb_lcd_dsp_method = LCD_CENTERING;
-		} else {
-			viaparinfo->lvds_setting_info->display_method =
-				viafb_lcd_dsp_method = LCD_EXPANDSION;
-		}
-
-		if (active_dev.lcd_mode == LCD_SPWG) {
-			viaparinfo->lvds_setting_info->lcd_mode =
-				viafb_lcd_mode = LCD_SPWG;
-		} else {
-			viaparinfo->lvds_setting_info->lcd_mode =
-				viafb_lcd_mode = LCD_OPENLDI;
-		}
-
-		if (active_dev.lcd_panel_id <= LCD_PANEL_ID_MAXIMUM) {
-			viafb_lcd_panel_id = active_dev.lcd_panel_id;
-			viafb_init_lcd_size();
-		}
-	}
-
-	/* Check property of mode: */
-	if (!active_dev.xres1)
-		viafb_second_xres = 640;
-	else
-		viafb_second_xres = active_dev.xres1;
-	if (!active_dev.yres1)
-		viafb_second_yres = 480;
-	else
-		viafb_second_yres = active_dev.yres1;
-	if (active_dev.bpp != 0)
-		viafb_bpp = active_dev.bpp;
-	if (active_dev.bpp1 != 0)
-		viafb_bpp1 = active_dev.bpp1;
-	if (active_dev.refresh != 0)
-		viafb_refresh = active_dev.refresh;
-	if (active_dev.refresh1 != 0)
-		viafb_refresh1 = active_dev.refresh1;
-	if ((active_dev.samm == STATE_OFF) || (active_dev.samm == STATE_ON))
-		viafb_SAMM_ON = active_dev.samm;
-	viafb_primary_dev = active_dev.primary_dev;
-
-	via_set_primary_address(0);
-	via_set_secondary_address(viafb_SAMM_ON ? viafb_second_offset : 0);
-	viafb_set_iga_path();
-}
-
 static int get_primary_device(void)
 {
 	int primary_device = 0;
@@ -1060,124 +927,6 @@ static int get_primary_device(void)
 	return primary_device;
 }
 
-static void apply_second_mode_setting(struct fb_var_screeninfo
-	*sec_var)
-{
-	u32 htotal, vtotal, long_refresh;
-
-	htotal = sec_var->xres + sec_var->left_margin +
-		sec_var->right_margin + sec_var->hsync_len;
-	vtotal = sec_var->yres + sec_var->upper_margin +
-		sec_var->lower_margin + sec_var->vsync_len;
-	if ((sec_var->xres_virtual * (sec_var->bits_per_pixel >> 3)) & 0x1F) {
-		/*Is 32 bytes alignment? */
-		/*32 pixel alignment */
-		sec_var->xres_virtual = (sec_var->xres_virtual + 31) & ~31;
-	}
-
-	htotal = sec_var->xres + sec_var->left_margin +
-		sec_var->right_margin + sec_var->hsync_len;
-	vtotal = sec_var->yres + sec_var->upper_margin +
-		sec_var->lower_margin + sec_var->vsync_len;
-	long_refresh = 1000000000UL / sec_var->pixclock * 1000;
-	long_refresh /= (htotal * vtotal);
-
-	viafb_second_xres = sec_var->xres;
-	viafb_second_yres = sec_var->yres;
-	viafb_second_virtual_xres = sec_var->xres_virtual;
-	viafb_second_virtual_yres = sec_var->yres_virtual;
-	viafb_bpp1 = sec_var->bits_per_pixel;
-	viafb_refresh1 = viafb_get_refresh(sec_var->xres, sec_var->yres,
-		long_refresh);
-}
-
-static int apply_device_setting(struct viafb_ioctl_setting setting_info,
-	struct fb_info *info)
-{
-	int need_set_mode = 0;
-	DEBUG_MSG(KERN_INFO "apply_device_setting\n");
-
-	if (setting_info.device_flag) {
-		need_set_mode = 1;
-		check_available_device_to_enable(setting_info.device_status);
-	}
-
-	/* Unlock LCD's operation according to LCD flag
-	   and check if the setting value is valid. */
-	/* If the value is valid, apply the new setting value to the device. */
-	if (viafb_LCD_ON) {
-		if (setting_info.lcd_operation_flag & OP_LCD_CENTERING) {
-			need_set_mode = 1;
-			if (setting_info.lcd_attributes.display_center) {
-				/* Centering */
-				viaparinfo->lvds_setting_info->display_method =
-				    LCD_CENTERING;
-				viafb_lcd_dsp_method = LCD_CENTERING;
-				viaparinfo->lvds_setting_info2->display_method =
-				    viafb_lcd_dsp_method = LCD_CENTERING;
-			} else {
-				/* expandsion */
-				viaparinfo->lvds_setting_info->display_method =
-				    LCD_EXPANDSION;
-				viafb_lcd_dsp_method = LCD_EXPANDSION;
-				viaparinfo->lvds_setting_info2->display_method =
-				    LCD_EXPANDSION;
-				viafb_lcd_dsp_method = LCD_EXPANDSION;
-			}
-		}
-
-		if (setting_info.lcd_operation_flag & OP_LCD_MODE) {
-			need_set_mode = 1;
-			if (setting_info.lcd_attributes.lcd_mode ==
-				LCD_SPWG) {
-				viaparinfo->lvds_setting_info->lcd_mode =
-					viafb_lcd_mode = LCD_SPWG;
-			} else {
-				viaparinfo->lvds_setting_info->lcd_mode =
-					viafb_lcd_mode = LCD_OPENLDI;
-			}
-			viaparinfo->lvds_setting_info2->lcd_mode =
-			    viaparinfo->lvds_setting_info->lcd_mode;
-		}
-
-		if (setting_info.lcd_operation_flag & OP_LCD_PANEL_ID) {
-			need_set_mode = 1;
-			if (setting_info.lcd_attributes.panel_id <=
-			    LCD_PANEL_ID_MAXIMUM) {
-				viafb_lcd_panel_id =
-				    setting_info.lcd_attributes.panel_id;
-				viafb_init_lcd_size();
-			}
-		}
-	}
-
-	if (0 != (setting_info.samm_status & OP_SAMM)) {
-		setting_info.samm_status =
-		    setting_info.samm_status & (~OP_SAMM);
-		if (setting_info.samm_status == 0
-		    || setting_info.samm_status == 1) {
-			viafb_SAMM_ON = setting_info.samm_status;
-
-			if (viafb_SAMM_ON)
-				viafb_primary_dev = setting_info.primary_device;
-
-			via_set_primary_address(0);
-			via_set_secondary_address(viafb_SAMM_ON ?
-				viafb_second_offset : 0);
-			viafb_set_iga_path();
-		}
-		need_set_mode = 1;
-	}
-
-	if (!need_set_mode) {
-		;
-	} else {
-		viafb_set_iga_path();
-		viafb_set_par(info);
-	}
-	return true;
-}
-
 static void retrieve_device_setting(struct viafb_ioctl_setting
 	*setting_info)
 {
-- 
cgit v1.2.3


From cd5899551c48dff5fe05914fc187932111091953 Mon Sep 17 00:00:00 2001
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Date: Tue, 13 Jul 2010 19:44:05 +0000
Subject: viafb: probe cleanups

viafb: probe cleanups

Removal of strange special cases that must not exist as well as a
useless check.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Joseph Chan <JosephChan@via.com.tw>
---
 drivers/video/via/viafbdev.c | 27 +++------------------------
 1 file changed, 3 insertions(+), 24 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index 1128d516c8a..0f56eb28227 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -1525,10 +1525,6 @@ int __devinit via_fb_pci_probe(struct viafb_dev *vdev)
 	parse_lcd_port();
 	parse_dvi_port();
 
-	/* for dual-fb must viafb_SAMM_ON=1 and viafb_dual_fb=1 */
-	if (!viafb_SAMM_ON)
-		viafb_dual_fb = 0;
-
 	viafb_init_chip_info(vdev->chip_type);
 	/*
 	 * The framebuffer will have been successfully mapped by
@@ -1572,30 +1568,13 @@ int __devinit via_fb_pci_probe(struct viafb_dev *vdev)
 		parse_mode(viafb_mode1, &viafb_second_xres,
 			&viafb_second_yres);
 
-		if (0 == viafb_second_virtual_xres) {
-			switch (viafb_second_xres) {
-			case 1400:
-				viafb_second_virtual_xres = 1408;
-				break;
-			default:
-				viafb_second_virtual_xres = viafb_second_xres;
-				break;
-			}
-		}
-		if (0 == viafb_second_virtual_yres)
-			viafb_second_virtual_yres = viafb_second_yres;
+		viafb_second_virtual_xres = viafb_second_xres;
+		viafb_second_virtual_yres = viafb_second_yres;
 	}
 
 	default_var.xres = default_xres;
 	default_var.yres = default_yres;
-	switch (default_xres) {
-	case 1400:
-		default_var.xres_virtual = 1408;
-		break;
-	default:
-		default_var.xres_virtual = default_xres;
-		break;
-	}
+	default_var.xres_virtual = default_xres;
 	default_var.yres_virtual = default_yres;
 	default_var.bits_per_pixel = viafb_bpp;
 	default_var.pixclock =
-- 
cgit v1.2.3


From af29a5b1781bf642a29b5e9bb6162dccfcd626df Mon Sep 17 00:00:00 2001
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Date: Fri, 23 Jul 2010 11:32:25 +0000
Subject: viafb: fix accel_flags check_var bug

viafb: fix accel_flags check_var bug

In check_var we should check and modify the var given and not the
one which is currently active. So this code was obviously wrong.
Probably this was doing no harm because all acceleration functions
also check whether acceleration is possible. (otherwise I would
expect this to lead to a null pointer dereference)

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Joseph Chan <JosephChan@via.com.tw>
---
 drivers/video/via/viafbdev.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index 0f56eb28227..bdd0e4130f4 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -216,9 +216,9 @@ static int viafb_check_var(struct fb_var_screeninfo *var,
 
 	/* Adjust var according to our driver's own table */
 	viafb_fill_var_timing_info(var, viafb_refresh, vmode_entry);
-	if (info->var.accel_flags & FB_ACCELF_TEXT &&
+	if (var->accel_flags & FB_ACCELF_TEXT &&
 		!ppar->shared->vdev->engine_mmio)
-		info->var.accel_flags = 0;
+		var->accel_flags = 0;
 
 	return 0;
 }
-- 
cgit v1.2.3


From eca9c47bd3120d3643b83dce09b0cf49fdd73d1a Mon Sep 17 00:00:00 2001
From: Henrik Kretzschmar <henne@nachtwindheim.de>
Date: Thu, 17 Jun 2010 12:01:24 +0200
Subject: fbdev: section cleanup in viafb driver

This patch moves two functions from .devexit to .text,
which are called on the probe error path.
Also a function which is called by probe is moved
from .text to .devinit.

WARNING: vmlinux.o(.devinit.text+0x2ca5): Section mismatch in reference
from the function via_pci_probe() to the function
devexit.text:via_teardown_subdevs()
The function __devinit via_pci_probe() references
a function __devexit via_teardown_subdevs().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
via_teardown_subdevs() so it may be used outside an exit section.

WARNING: vmlinux.o(.devinit.text+0x2cb1): Section mismatch in reference
from the function via_pci_probe() to the function
devexit.text:via_pci_teardown_mmio()
The function __devinit via_pci_probe() references
a function __devexit via_pci_teardown_mmio().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
via_pci_teardown_mmio() so it may be used outside an exit section.

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/via/via-core.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/via/via-core.c b/drivers/video/via/via-core.c
index 4afa3c5c059..66f40303311 100644
--- a/drivers/video/via/via-core.c
+++ b/drivers/video/via/via-core.c
@@ -64,7 +64,7 @@ static inline int viafb_mmio_read(int reg)
  */
 static u32 viafb_enabled_ints;
 
-static void viafb_int_init(void)
+static void __devinit viafb_int_init(void)
 {
 	viafb_enabled_ints = 0;
 
@@ -489,7 +489,7 @@ out_unmap:
 	return ret;
 }
 
-static void __devexit via_pci_teardown_mmio(struct viafb_dev *vdev)
+static void via_pci_teardown_mmio(struct viafb_dev *vdev)
 {
 	iounmap(vdev->fbmem);
 	iounmap(vdev->engine_mmio);
@@ -548,7 +548,7 @@ static int __devinit via_setup_subdevs(struct viafb_dev *vdev)
 	return 0;
 }
 
-static void __devexit via_teardown_subdevs(void)
+static void via_teardown_subdevs(void)
 {
 	int i;
 
-- 
cgit v1.2.3


From 901b97d7b7ca9512ebb5d358df4ba6f8031f32cd Mon Sep 17 00:00:00 2001
From: Ben Hutchings <ben@decadent.org.uk>
Date: Tue, 20 Jul 2010 00:40:16 +0100
Subject: viafb: Depends on X86

VIA UniChrome and Chrome9 GPUs only exist as Integrated Graphics
Processors in x86 chipsets.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 3d94a147172..162a0b7ee4c 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1505,7 +1505,7 @@ config FB_SIS_315
 
 config FB_VIA
        tristate "VIA UniChrome (Pro) and Chrome9 display support"
-       depends on FB && PCI
+       depends on FB && PCI && X86
        select FB_CFB_FILLRECT
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT
-- 
cgit v1.2.3


From f27098379b1dbfedae99e5b86e10529f799d4071 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Tue, 29 Jun 2010 14:09:43 -0700
Subject: drivers/video/via/via-gpio.c: fix warning

drivers/video/via/via-gpio.c: In function 'viafb_gpio_probe':
drivers/video/via/via-gpio.c:216: warning: assignment from incompatible pointer type

Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: Scott Fang <ScottFang@viatech.com.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/via/via-gpio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/video/via/via-gpio.c b/drivers/video/via/via-gpio.c
index 595516aea69..39acb37e7a1 100644
--- a/drivers/video/via/via-gpio.c
+++ b/drivers/video/via/via-gpio.c
@@ -73,7 +73,7 @@ struct viafb_gpio_cfg {
 	struct gpio_chip gpio_chip;
 	struct viafb_dev *vdev;
 	struct viafb_gpio *active_gpios[VIAFB_NUM_GPIOS];
-	char *gpio_names[VIAFB_NUM_GPIOS];
+	const char *gpio_names[VIAFB_NUM_GPIOS];
 };
 
 /*
-- 
cgit v1.2.3