From dd3bec63f80e663cdb655b8bdc9c1a0ea938f1c5 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 1 Mar 2006 15:13:50 +0900 Subject: [PATCH] sata_sil: remove unaffected drives from m15w blacklist m15w blacklist overgrew by attributing unrelated problems to m15w including R_ERR on DMA activate FIS errata. This patch shrinks sata_sil m15w blacklist such that it's as reported by Silicon Image. Signed-off-by: Tejun Heo Cc: Carlos Pardo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index d0a85073ebf..f4e262b06cf 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -141,12 +141,8 @@ static const struct sil_drivelist { { "ST330013AS", SIL_QUIRK_MOD15WRITE }, { "ST340017AS", SIL_QUIRK_MOD15WRITE }, { "ST360015AS", SIL_QUIRK_MOD15WRITE }, - { "ST380013AS", SIL_QUIRK_MOD15WRITE }, { "ST380023AS", SIL_QUIRK_MOD15WRITE }, { "ST3120023AS", SIL_QUIRK_MOD15WRITE }, - { "ST3160023AS", SIL_QUIRK_MOD15WRITE }, - { "ST3120026AS", SIL_QUIRK_MOD15WRITE }, - { "ST3200822AS", SIL_QUIRK_MOD15WRITE }, { "ST340014ASL", SIL_QUIRK_MOD15WRITE }, { "ST360014ASL", SIL_QUIRK_MOD15WRITE }, { "ST380011ASL", SIL_QUIRK_MOD15WRITE }, -- cgit v1.2.3 From 5457f2194ad198a0aba4190ec99a6a81846fdca5 Mon Sep 17 00:00:00 2001 From: "zhao, forrest" Date: Thu, 13 Jul 2006 13:38:32 +0800 Subject: [PATCH] The redefinition of ahci_start_engine() and ahci_stop_engine() - Make ahci_start_engine() and ahci_stop_engine() more consistent with AHCI spec 1.1 - Change their input parameter from ap to port_mmio - Update the existing users of ahci_start_engine() and ahci_stop_engine() Signed-off-by: Forrest Zhao Signed-off-by: Hannes Reinecke Signed-off-by: Jens Axboe Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 82 +++++++++++++++++++++++++++++++++++++---------------- 1 file changed, 57 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 77e7202a0eb..f1516ca2c52 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -205,6 +205,8 @@ static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs * static void ahci_irq_clear(struct ata_port *ap); static int ahci_port_start(struct ata_port *ap); static void ahci_port_stop(struct ata_port *ap); +static int ahci_start_engine(void __iomem *port_mmio); +static int ahci_stop_engine(void __iomem *port_mmio); static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf); static void ahci_qc_prep(struct ata_queued_cmd *qc); static u8 ahci_check_status(struct ata_port *ap); @@ -508,41 +510,64 @@ static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg_in, writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } -static int ahci_stop_engine(struct ata_port *ap) +static int ahci_stop_engine(void __iomem *port_mmio) { - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - int work; u32 tmp; tmp = readl(port_mmio + PORT_CMD); + + /* Check if the HBA is idle */ + if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0) + return 0; + + /* Setting HBA to idle */ tmp &= ~PORT_CMD_START; writel(tmp, port_mmio + PORT_CMD); - /* wait for engine to stop. TODO: this could be + /* wait for engine to stop. This could be * as long as 500 msec */ - work = 1000; - while (work-- > 0) { - tmp = readl(port_mmio + PORT_CMD); - if ((tmp & PORT_CMD_LIST_ON) == 0) - return 0; - udelay(10); - } + tmp = ata_wait_register(port_mmio + PORT_CMD, + PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500); + if(tmp & PORT_CMD_LIST_ON) + return -EIO; - return -EIO; + return 0; } -static void ahci_start_engine(struct ata_port *ap) +static int ahci_start_engine(void __iomem *port_mmio) { - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); u32 tmp; + /* + * Get current status + */ tmp = readl(port_mmio + PORT_CMD); + + /* + * AHCI rev 1.1 section 10.3.1: + * Software shall not set PxCMD.ST to '1' until it verifies + * that PxCMD.CR is '0' and has set PxCMD.FRE to '1' + */ + if ((tmp & PORT_CMD_FIS_RX) == 0) + return -EPERM; + + /* + * wait for engine to become idle. + */ + tmp = ata_wait_register(port_mmio + PORT_CMD, + PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1,500); + if(tmp & PORT_CMD_LIST_ON) + return -EBUSY; + + /* + * Start DMA + */ tmp |= PORT_CMD_START; writel(tmp, port_mmio + PORT_CMD); readl(port_mmio + PORT_CMD); /* flush */ + + return 0; } static unsigned int ahci_dev_classify(struct ata_port *ap) @@ -626,7 +651,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class) } /* prepare for SRST (AHCI-1.1 10.4.1) */ - rc = ahci_stop_engine(ap); + rc = ahci_stop_engine(port_mmio); if (rc) { reason = "failed to stop engine"; goto fail_restart; @@ -647,7 +672,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class) } /* restart engine */ - ahci_start_engine(ap); + ahci_start_engine(port_mmio); ata_tf_init(ap->device, &tf); fis = pp->cmd_tbl; @@ -706,7 +731,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class) return 0; fail_restart: - ahci_start_engine(ap); + ahci_start_engine(port_mmio); fail: ata_port_printk(ap, KERN_ERR, "softreset failed (%s)\n", reason); return rc; @@ -717,11 +742,13 @@ static int ahci_hardreset(struct ata_port *ap, unsigned int *class) struct ahci_port_priv *pp = ap->private_data; u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; struct ata_taskfile tf; + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); int rc; DPRINTK("ENTER\n"); - ahci_stop_engine(ap); + ahci_stop_engine(port_mmio); /* clear D2H reception area to properly wait for D2H FIS */ ata_tf_init(ap->device, &tf); @@ -730,7 +757,7 @@ static int ahci_hardreset(struct ata_port *ap, unsigned int *class) rc = sata_std_hardreset(ap, class); - ahci_start_engine(ap); + ahci_start_engine(port_mmio); if (rc == 0 && ata_port_online(ap)) *class = ahci_dev_classify(ap); @@ -1052,10 +1079,13 @@ static void ahci_thaw(struct ata_port *ap) static void ahci_error_handler(struct ata_port *ap) { + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + if (!(ap->pflags & ATA_PFLAG_FROZEN)) { /* restart engine */ - ahci_stop_engine(ap); - ahci_start_engine(ap); + ahci_stop_engine(port_mmio); + ahci_start_engine(port_mmio); } /* perform recovery */ @@ -1066,14 +1096,16 @@ static void ahci_error_handler(struct ata_port *ap) static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); if (qc->flags & ATA_QCFLAG_FAILED) qc->err_mask |= AC_ERR_OTHER; if (qc->err_mask) { /* make DMA engine forget about the failed command */ - ahci_stop_engine(ap); - ahci_start_engine(ap); + ahci_stop_engine(port_mmio); + ahci_start_engine(port_mmio); } } -- cgit v1.2.3 From 254950cd56fee220c9d548f3e57211b95976ba64 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 26 Jul 2006 15:59:25 +0900 Subject: [PATCH] ahci: relocate several internal functions * move ahci_port_start/stop() below EH functions. This makes ahci more consistent with other drivers and makes prototypes for ahci_start/stop_engine() unnecessary. * swap positions between ahci_start_engine() and ahci_stop_engine() for readability. Signed-off-by: Tejun Heo Signed-off-by: Zhao, Forrest Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 255 ++++++++++++++++++++++++++-------------------------- 1 file changed, 126 insertions(+), 129 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index f1516ca2c52..92e2b950eff 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -205,8 +205,6 @@ static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs * static void ahci_irq_clear(struct ata_port *ap); static int ahci_port_start(struct ata_port *ap); static void ahci_port_stop(struct ata_port *ap); -static int ahci_start_engine(void __iomem *port_mmio); -static int ahci_stop_engine(void __iomem *port_mmio); static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf); static void ahci_qc_prep(struct ata_queued_cmd *qc); static u8 ahci_check_status(struct ata_port *ap); @@ -374,108 +372,6 @@ static inline void __iomem *ahci_port_base (void __iomem *base, unsigned int por return (void __iomem *) ahci_port_base_ul((unsigned long)base, port); } -static int ahci_port_start(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct ahci_host_priv *hpriv = ap->host_set->private_data; - struct ahci_port_priv *pp; - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - void *mem; - dma_addr_t mem_dma; - int rc; - - pp = kmalloc(sizeof(*pp), GFP_KERNEL); - if (!pp) - return -ENOMEM; - memset(pp, 0, sizeof(*pp)); - - rc = ata_pad_alloc(ap, dev); - if (rc) { - kfree(pp); - return rc; - } - - mem = dma_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma, GFP_KERNEL); - if (!mem) { - ata_pad_free(ap, dev); - kfree(pp); - return -ENOMEM; - } - memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ); - - /* - * First item in chunk of DMA memory: 32-slot command table, - * 32 bytes each in size - */ - pp->cmd_slot = mem; - pp->cmd_slot_dma = mem_dma; - - mem += AHCI_CMD_SLOT_SZ; - mem_dma += AHCI_CMD_SLOT_SZ; - - /* - * Second item: Received-FIS area - */ - pp->rx_fis = mem; - pp->rx_fis_dma = mem_dma; - - mem += AHCI_RX_FIS_SZ; - mem_dma += AHCI_RX_FIS_SZ; - - /* - * Third item: data area for storing a single command - * and its scatter-gather table - */ - pp->cmd_tbl = mem; - pp->cmd_tbl_dma = mem_dma; - - ap->private_data = pp; - - if (hpriv->cap & HOST_CAP_64) - writel((pp->cmd_slot_dma >> 16) >> 16, port_mmio + PORT_LST_ADDR_HI); - writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR); - readl(port_mmio + PORT_LST_ADDR); /* flush */ - - if (hpriv->cap & HOST_CAP_64) - writel((pp->rx_fis_dma >> 16) >> 16, port_mmio + PORT_FIS_ADDR_HI); - writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR); - readl(port_mmio + PORT_FIS_ADDR); /* flush */ - - writel(PORT_CMD_ICC_ACTIVE | PORT_CMD_FIS_RX | - PORT_CMD_POWER_ON | PORT_CMD_SPIN_UP | - PORT_CMD_START, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* flush */ - - return 0; -} - - -static void ahci_port_stop(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct ahci_port_priv *pp = ap->private_data; - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - u32 tmp; - - tmp = readl(port_mmio + PORT_CMD); - tmp &= ~(PORT_CMD_START | PORT_CMD_FIS_RX); - writel(tmp, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* flush */ - - /* spec says 500 msecs for each PORT_CMD_{START,FIS_RX} bit, so - * this is slightly incorrect. - */ - msleep(500); - - ap->private_data = NULL; - dma_free_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, - pp->cmd_slot, pp->cmd_slot_dma); - ata_pad_free(ap, dev); - kfree(pp); -} - static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg_in) { unsigned int sc_reg; @@ -510,31 +406,6 @@ static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg_in, writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } -static int ahci_stop_engine(void __iomem *port_mmio) -{ - u32 tmp; - - tmp = readl(port_mmio + PORT_CMD); - - /* Check if the HBA is idle */ - if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0) - return 0; - - /* Setting HBA to idle */ - tmp &= ~PORT_CMD_START; - writel(tmp, port_mmio + PORT_CMD); - - /* wait for engine to stop. This could be - * as long as 500 msec - */ - tmp = ata_wait_register(port_mmio + PORT_CMD, - PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500); - if(tmp & PORT_CMD_LIST_ON) - return -EIO; - - return 0; -} - static int ahci_start_engine(void __iomem *port_mmio) { u32 tmp; @@ -570,6 +441,31 @@ static int ahci_start_engine(void __iomem *port_mmio) return 0; } +static int ahci_stop_engine(void __iomem *port_mmio) +{ + u32 tmp; + + tmp = readl(port_mmio + PORT_CMD); + + /* Check if the HBA is idle */ + if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0) + return 0; + + /* Setting HBA to idle */ + tmp &= ~PORT_CMD_START; + writel(tmp, port_mmio + PORT_CMD); + + /* wait for engine to stop. This could be + * as long as 500 msec + */ + tmp = ata_wait_register(port_mmio + PORT_CMD, + PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500); + if(tmp & PORT_CMD_LIST_ON) + return -EIO; + + return 0; +} + static unsigned int ahci_dev_classify(struct ata_port *ap) { void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; @@ -1109,6 +1005,107 @@ static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) } } +static int ahci_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct ahci_host_priv *hpriv = ap->host_set->private_data; + struct ahci_port_priv *pp; + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + void *mem; + dma_addr_t mem_dma; + int rc; + + pp = kmalloc(sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + memset(pp, 0, sizeof(*pp)); + + rc = ata_pad_alloc(ap, dev); + if (rc) { + kfree(pp); + return rc; + } + + mem = dma_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma, GFP_KERNEL); + if (!mem) { + ata_pad_free(ap, dev); + kfree(pp); + return -ENOMEM; + } + memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ); + + /* + * First item in chunk of DMA memory: 32-slot command table, + * 32 bytes each in size + */ + pp->cmd_slot = mem; + pp->cmd_slot_dma = mem_dma; + + mem += AHCI_CMD_SLOT_SZ; + mem_dma += AHCI_CMD_SLOT_SZ; + + /* + * Second item: Received-FIS area + */ + pp->rx_fis = mem; + pp->rx_fis_dma = mem_dma; + + mem += AHCI_RX_FIS_SZ; + mem_dma += AHCI_RX_FIS_SZ; + + /* + * Third item: data area for storing a single command + * and its scatter-gather table + */ + pp->cmd_tbl = mem; + pp->cmd_tbl_dma = mem_dma; + + ap->private_data = pp; + + if (hpriv->cap & HOST_CAP_64) + writel((pp->cmd_slot_dma >> 16) >> 16, port_mmio + PORT_LST_ADDR_HI); + writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR); + readl(port_mmio + PORT_LST_ADDR); /* flush */ + + if (hpriv->cap & HOST_CAP_64) + writel((pp->rx_fis_dma >> 16) >> 16, port_mmio + PORT_FIS_ADDR_HI); + writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR); + readl(port_mmio + PORT_FIS_ADDR); /* flush */ + + writel(PORT_CMD_ICC_ACTIVE | PORT_CMD_FIS_RX | + PORT_CMD_POWER_ON | PORT_CMD_SPIN_UP | + PORT_CMD_START, port_mmio + PORT_CMD); + readl(port_mmio + PORT_CMD); /* flush */ + + return 0; +} + +static void ahci_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct ahci_port_priv *pp = ap->private_data; + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + u32 tmp; + + tmp = readl(port_mmio + PORT_CMD); + tmp &= ~(PORT_CMD_START | PORT_CMD_FIS_RX); + writel(tmp, port_mmio + PORT_CMD); + readl(port_mmio + PORT_CMD); /* flush */ + + /* spec says 500 msecs for each PORT_CMD_{START,FIS_RX} bit, so + * this is slightly incorrect. + */ + msleep(500); + + ap->private_data = NULL; + dma_free_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, + pp->cmd_slot, pp->cmd_slot_dma); + ata_pad_free(ap, dev); + kfree(pp); +} + static void ahci_setup_port(struct ata_ioports *port, unsigned long base, unsigned int port_idx) { -- cgit v1.2.3 From d8fcd116d203dfe2f6c272d0cd67724b172f1bc2 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 26 Jul 2006 15:59:25 +0900 Subject: [PATCH] ahci: cosmetic changes to ahci_start/stop_engine() * fascist-format comments according to comment style used in libata core layer. * if() -> if () Signed-off-by: Tejun Heo Signed-off-by: Zhao, Forrest Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 27 +++++++++------------------ 1 file changed, 9 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 92e2b950eff..ee00aed9bde 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -410,30 +410,23 @@ static int ahci_start_engine(void __iomem *port_mmio) { u32 tmp; - /* - * Get current status - */ + /* get current status */ tmp = readl(port_mmio + PORT_CMD); - /* - * AHCI rev 1.1 section 10.3.1: + /* AHCI rev 1.1 section 10.3.1: * Software shall not set PxCMD.ST to '1' until it verifies * that PxCMD.CR is '0' and has set PxCMD.FRE to '1' */ if ((tmp & PORT_CMD_FIS_RX) == 0) return -EPERM; - /* - * wait for engine to become idle. - */ + /* wait for engine to become idle */ tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1,500); - if(tmp & PORT_CMD_LIST_ON) + if (tmp & PORT_CMD_LIST_ON) return -EBUSY; - /* - * Start DMA - */ + /* start DMA */ tmp |= PORT_CMD_START; writel(tmp, port_mmio + PORT_CMD); readl(port_mmio + PORT_CMD); /* flush */ @@ -447,20 +440,18 @@ static int ahci_stop_engine(void __iomem *port_mmio) tmp = readl(port_mmio + PORT_CMD); - /* Check if the HBA is idle */ + /* check if the HBA is idle */ if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0) return 0; - /* Setting HBA to idle */ + /* setting HBA to idle */ tmp &= ~PORT_CMD_START; writel(tmp, port_mmio + PORT_CMD); - /* wait for engine to stop. This could be - * as long as 500 msec - */ + /* wait for engine to stop. This could be as long as 500 msec */ tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500); - if(tmp & PORT_CMD_LIST_ON) + if (tmp & PORT_CMD_LIST_ON) return -EIO; return 0; -- cgit v1.2.3 From 9f5920567bfabbd1be26112a31c44652b6587394 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 26 Jul 2006 15:59:26 +0900 Subject: [PATCH] ahci: simplify ahci_start_engine() Simplify ahci_start_engine() by killing prerequisite condition checks. Rationales are.. * No user checks error return from ahci_start_engine() * Code flow guarantees the prerequisite conditions unless the controller is malfunctioning. In such cases, the driver had chances to learn about the problem _before_ calling this function. * Closely related to the above two, driver calls into this function even when prerequisites fail hoping for the best. Basically, ahci_start_engine() should only do the operation itself. It isn't the right place to check for prerequisites. Signed-off-by: Tejun Heo Signed-off-by: Zhao, Forrest Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 21 ++------------------- 1 file changed, 2 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index ee00aed9bde..e02b9c65287 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -406,32 +406,15 @@ static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg_in, writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } -static int ahci_start_engine(void __iomem *port_mmio) +static void ahci_start_engine(void __iomem *port_mmio) { u32 tmp; - /* get current status */ - tmp = readl(port_mmio + PORT_CMD); - - /* AHCI rev 1.1 section 10.3.1: - * Software shall not set PxCMD.ST to '1' until it verifies - * that PxCMD.CR is '0' and has set PxCMD.FRE to '1' - */ - if ((tmp & PORT_CMD_FIS_RX) == 0) - return -EPERM; - - /* wait for engine to become idle */ - tmp = ata_wait_register(port_mmio + PORT_CMD, - PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1,500); - if (tmp & PORT_CMD_LIST_ON) - return -EBUSY; - /* start DMA */ + tmp = readl(port_mmio + PORT_CMD); tmp |= PORT_CMD_START; writel(tmp, port_mmio + PORT_CMD); readl(port_mmio + PORT_CMD); /* flush */ - - return 0; } static int ahci_stop_engine(void __iomem *port_mmio) -- cgit v1.2.3 From 0be0aa98985dfec42502c0d0af2a1baff9bdb19f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 26 Jul 2006 15:59:26 +0900 Subject: [PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest Signed-off-by: Tejun Heo Signed-off-by: Zhao, Forrest Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 202 +++++++++++++++++++++++++++++++++++++++------------- 1 file changed, 151 insertions(+), 51 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index e02b9c65287..fb71fa7bc5d 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -92,7 +92,9 @@ enum { HOST_AHCI_EN = (1 << 31), /* AHCI enabled */ /* HOST_CAP bits */ + HOST_CAP_SSC = (1 << 14), /* Slumber capable */ HOST_CAP_CLO = (1 << 24), /* Command List Override support */ + HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */ HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */ HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */ @@ -155,6 +157,7 @@ enum { PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */ PORT_CMD_START = (1 << 0), /* Enable port DMA engine */ + PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */ PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */ PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */ PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */ @@ -440,6 +443,135 @@ static int ahci_stop_engine(void __iomem *port_mmio) return 0; } +static void ahci_start_fis_rx(void __iomem *port_mmio, u32 cap, + dma_addr_t cmd_slot_dma, dma_addr_t rx_fis_dma) +{ + u32 tmp; + + /* set FIS registers */ + if (cap & HOST_CAP_64) + writel((cmd_slot_dma >> 16) >> 16, port_mmio + PORT_LST_ADDR_HI); + writel(cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR); + + if (cap & HOST_CAP_64) + writel((rx_fis_dma >> 16) >> 16, port_mmio + PORT_FIS_ADDR_HI); + writel(rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR); + + /* enable FIS reception */ + tmp = readl(port_mmio + PORT_CMD); + tmp |= PORT_CMD_FIS_RX; + writel(tmp, port_mmio + PORT_CMD); + + /* flush */ + readl(port_mmio + PORT_CMD); +} + +static int ahci_stop_fis_rx(void __iomem *port_mmio) +{ + u32 tmp; + + /* disable FIS reception */ + tmp = readl(port_mmio + PORT_CMD); + tmp &= ~PORT_CMD_FIS_RX; + writel(tmp, port_mmio + PORT_CMD); + + /* wait for completion, spec says 500ms, give it 1000 */ + tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON, + PORT_CMD_FIS_ON, 10, 1000); + if (tmp & PORT_CMD_FIS_ON) + return -EBUSY; + + return 0; +} + +static void ahci_power_up(void __iomem *port_mmio, u32 cap) +{ + u32 cmd; + + cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK; + + /* spin up device */ + if (cap & HOST_CAP_SSS) { + cmd |= PORT_CMD_SPIN_UP; + writel(cmd, port_mmio + PORT_CMD); + } + + /* wake up link */ + writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD); +} + +static void ahci_power_down(void __iomem *port_mmio, u32 cap) +{ + u32 cmd, scontrol; + + cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK; + + if (cap & HOST_CAP_SSC) { + /* enable transitions to slumber mode */ + scontrol = readl(port_mmio + PORT_SCR_CTL); + if ((scontrol & 0x0f00) > 0x100) { + scontrol &= ~0xf00; + writel(scontrol, port_mmio + PORT_SCR_CTL); + } + + /* put device into slumber mode */ + writel(cmd | PORT_CMD_ICC_SLUMBER, port_mmio + PORT_CMD); + + /* wait for the transition to complete */ + ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_ICC_SLUMBER, + PORT_CMD_ICC_SLUMBER, 1, 50); + } + + /* put device into listen mode */ + if (cap & HOST_CAP_SSS) { + /* first set PxSCTL.DET to 0 */ + scontrol = readl(port_mmio + PORT_SCR_CTL); + scontrol &= ~0xf; + writel(scontrol, port_mmio + PORT_SCR_CTL); + + /* then set PxCMD.SUD to 0 */ + cmd &= ~PORT_CMD_SPIN_UP; + writel(cmd, port_mmio + PORT_CMD); + } +} + +static void ahci_init_port(void __iomem *port_mmio, u32 cap, + dma_addr_t cmd_slot_dma, dma_addr_t rx_fis_dma) +{ + /* power up */ + ahci_power_up(port_mmio, cap); + + /* enable FIS reception */ + ahci_start_fis_rx(port_mmio, cap, cmd_slot_dma, rx_fis_dma); + + /* enable DMA */ + ahci_start_engine(port_mmio); +} + +static int ahci_deinit_port(void __iomem *port_mmio, u32 cap, const char **emsg) +{ + int rc; + + /* disable DMA */ + rc = ahci_stop_engine(port_mmio); + if (rc) { + *emsg = "failed to stop engine"; + return rc; + } + + /* disable FIS reception */ + rc = ahci_stop_fis_rx(port_mmio); + if (rc) { + *emsg = "failed stop FIS RX"; + return rc; + } + + /* put device into slumber mode */ + ahci_power_down(port_mmio, cap); + + return 0; +} + static unsigned int ahci_dev_classify(struct ata_port *ap) { void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; @@ -1037,20 +1169,8 @@ static int ahci_port_start(struct ata_port *ap) ap->private_data = pp; - if (hpriv->cap & HOST_CAP_64) - writel((pp->cmd_slot_dma >> 16) >> 16, port_mmio + PORT_LST_ADDR_HI); - writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR); - readl(port_mmio + PORT_LST_ADDR); /* flush */ - - if (hpriv->cap & HOST_CAP_64) - writel((pp->rx_fis_dma >> 16) >> 16, port_mmio + PORT_FIS_ADDR_HI); - writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR); - readl(port_mmio + PORT_FIS_ADDR); /* flush */ - - writel(PORT_CMD_ICC_ACTIVE | PORT_CMD_FIS_RX | - PORT_CMD_POWER_ON | PORT_CMD_SPIN_UP | - PORT_CMD_START, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* flush */ + /* initialize port */ + ahci_init_port(port_mmio, hpriv->cap, pp->cmd_slot_dma, pp->rx_fis_dma); return 0; } @@ -1058,20 +1178,17 @@ static int ahci_port_start(struct ata_port *ap) static void ahci_port_stop(struct ata_port *ap) { struct device *dev = ap->host_set->dev; + struct ahci_host_priv *hpriv = ap->host_set->private_data; struct ahci_port_priv *pp = ap->private_data; void __iomem *mmio = ap->host_set->mmio_base; void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - u32 tmp; - - tmp = readl(port_mmio + PORT_CMD); - tmp &= ~(PORT_CMD_START | PORT_CMD_FIS_RX); - writel(tmp, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* flush */ + const char *emsg = NULL; + int rc; - /* spec says 500 msecs for each PORT_CMD_{START,FIS_RX} bit, so - * this is slightly incorrect. - */ - msleep(500); + /* de-initialize port */ + rc = ahci_deinit_port(port_mmio, hpriv->cap, &emsg); + if (rc) + ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc); ap->private_data = NULL; dma_free_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, @@ -1099,7 +1216,7 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent) struct pci_dev *pdev = to_pci_dev(probe_ent->dev); void __iomem *mmio = probe_ent->mmio_base; u32 tmp, cap_save; - unsigned int i, j, using_dac; + unsigned int i, using_dac; int rc; void __iomem *port_mmio; @@ -1175,6 +1292,8 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent) } for (i = 0; i < probe_ent->n_ports; i++) { + const char *emsg = NULL; + #if 0 /* BIOSen initialize this incorrectly */ if (!(hpriv->port_map & (1 << i))) continue; @@ -1187,43 +1306,24 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent) (unsigned long) mmio, i); /* make sure port is not active */ - tmp = readl(port_mmio + PORT_CMD); - VPRINTK("PORT_CMD 0x%x\n", tmp); - if (tmp & (PORT_CMD_LIST_ON | PORT_CMD_FIS_ON | - PORT_CMD_FIS_RX | PORT_CMD_START)) { - tmp &= ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON | - PORT_CMD_FIS_RX | PORT_CMD_START); - writel(tmp, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* flush */ - - /* spec says 500 msecs for each bit, so - * this is slightly incorrect. - */ - msleep(500); - } - - writel(PORT_CMD_SPIN_UP, port_mmio + PORT_CMD); - - j = 0; - while (j < 100) { - msleep(10); - tmp = readl(port_mmio + PORT_SCR_STAT); - if ((tmp & 0xf) == 0x3) - break; - j++; - } + rc = ahci_deinit_port(port_mmio, hpriv->cap, &emsg); + if (rc) + dev_printk(KERN_WARNING, &pdev->dev, + "%s (%d)\n", emsg, rc); + /* clear SError */ tmp = readl(port_mmio + PORT_SCR_ERR); VPRINTK("PORT_SCR_ERR 0x%x\n", tmp); writel(tmp, port_mmio + PORT_SCR_ERR); - /* ack any pending irq events for this port */ + /* clear & turn off port IRQ */ tmp = readl(port_mmio + PORT_IRQ_STAT); VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp); if (tmp) writel(tmp, port_mmio + PORT_IRQ_STAT); writel(1 << i, mmio + HOST_IRQ_STAT); + writel(0, port_mmio + PORT_IRQ_MASK); } tmp = readl(mmio + HOST_CTL); -- cgit v1.2.3 From d91542c11f3981768367815cf087ad36e792ea4a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 26 Jul 2006 15:59:26 +0900 Subject: [PATCH] ahci: separate out ahci_reset_controller() and ahci_init_controller() Separate out ahci_reset_controller() and ahci_init_controller() from ata_host_init(). These will be used by PM callbacks. This patch doesn't introduce any behavior change. Signed-off-by: Tejun Heo Signed-off-by: Zhao, Forrest Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 171 +++++++++++++++++++++++++++++----------------------- 1 file changed, 94 insertions(+), 77 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index fb71fa7bc5d..a9e0c5f7909 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -572,6 +572,94 @@ static int ahci_deinit_port(void __iomem *port_mmio, u32 cap, const char **emsg) return 0; } +static int ahci_reset_controller(void __iomem *mmio, struct pci_dev *pdev) +{ + u32 cap_save, tmp; + + cap_save = readl(mmio + HOST_CAP); + cap_save &= ( (1<<28) | (1<<17) ); + cap_save |= (1 << 27); + + /* global controller reset */ + tmp = readl(mmio + HOST_CTL); + if ((tmp & HOST_RESET) == 0) { + writel(tmp | HOST_RESET, mmio + HOST_CTL); + readl(mmio + HOST_CTL); /* flush */ + } + + /* reset must complete within 1 second, or + * the hardware should be considered fried. + */ + ssleep(1); + + tmp = readl(mmio + HOST_CTL); + if (tmp & HOST_RESET) { + dev_printk(KERN_ERR, &pdev->dev, + "controller reset failed (0x%x)\n", tmp); + return -EIO; + } + + writel(HOST_AHCI_EN, mmio + HOST_CTL); + (void) readl(mmio + HOST_CTL); /* flush */ + writel(cap_save, mmio + HOST_CAP); + writel(0xf, mmio + HOST_PORTS_IMPL); + (void) readl(mmio + HOST_PORTS_IMPL); /* flush */ + + if (pdev->vendor == PCI_VENDOR_ID_INTEL) { + u16 tmp16; + + /* configure PCS */ + pci_read_config_word(pdev, 0x92, &tmp16); + tmp16 |= 0xf; + pci_write_config_word(pdev, 0x92, tmp16); + } + + return 0; +} + +static void ahci_init_controller(void __iomem *mmio, struct pci_dev *pdev, + int n_ports, u32 cap) +{ + int i, rc; + u32 tmp; + + for (i = 0; i < n_ports; i++) { + void __iomem *port_mmio = ahci_port_base(mmio, i); + const char *emsg = NULL; + +#if 0 /* BIOSen initialize this incorrectly */ + if (!(hpriv->port_map & (1 << i))) + continue; +#endif + + /* make sure port is not active */ + rc = ahci_deinit_port(port_mmio, cap, &emsg); + if (rc) + dev_printk(KERN_WARNING, &pdev->dev, + "%s (%d)\n", emsg, rc); + + /* clear SError */ + tmp = readl(port_mmio + PORT_SCR_ERR); + VPRINTK("PORT_SCR_ERR 0x%x\n", tmp); + writel(tmp, port_mmio + PORT_SCR_ERR); + + /* clear & turn off port IRQ */ + tmp = readl(port_mmio + PORT_IRQ_STAT); + VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp); + if (tmp) + writel(tmp, port_mmio + PORT_IRQ_STAT); + + writel(1 << i, mmio + HOST_IRQ_STAT); + writel(0, port_mmio + PORT_IRQ_MASK); + } + + tmp = readl(mmio + HOST_CTL); + VPRINTK("HOST_CTL 0x%x\n", tmp); + writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL); + tmp = readl(mmio + HOST_CTL); + VPRINTK("HOST_CTL 0x%x\n", tmp); +} + static unsigned int ahci_dev_classify(struct ata_port *ap) { void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; @@ -1215,47 +1303,12 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent) struct ahci_host_priv *hpriv = probe_ent->private_data; struct pci_dev *pdev = to_pci_dev(probe_ent->dev); void __iomem *mmio = probe_ent->mmio_base; - u32 tmp, cap_save; unsigned int i, using_dac; int rc; - void __iomem *port_mmio; - - cap_save = readl(mmio + HOST_CAP); - cap_save &= ( (1<<28) | (1<<17) ); - cap_save |= (1 << 27); - - /* global controller reset */ - tmp = readl(mmio + HOST_CTL); - if ((tmp & HOST_RESET) == 0) { - writel(tmp | HOST_RESET, mmio + HOST_CTL); - readl(mmio + HOST_CTL); /* flush */ - } - - /* reset must complete within 1 second, or - * the hardware should be considered fried. - */ - ssleep(1); - - tmp = readl(mmio + HOST_CTL); - if (tmp & HOST_RESET) { - dev_printk(KERN_ERR, &pdev->dev, - "controller reset failed (0x%x)\n", tmp); - return -EIO; - } - writel(HOST_AHCI_EN, mmio + HOST_CTL); - (void) readl(mmio + HOST_CTL); /* flush */ - writel(cap_save, mmio + HOST_CAP); - writel(0xf, mmio + HOST_PORTS_IMPL); - (void) readl(mmio + HOST_PORTS_IMPL); /* flush */ - - if (pdev->vendor == PCI_VENDOR_ID_INTEL) { - u16 tmp16; - - pci_read_config_word(pdev, 0x92, &tmp16); - tmp16 |= 0xf; - pci_write_config_word(pdev, 0x92, tmp16); - } + rc = ahci_reset_controller(mmio, pdev); + if (rc) + return rc; hpriv->cap = readl(mmio + HOST_CAP); hpriv->port_map = readl(mmio + HOST_PORTS_IMPL); @@ -1291,46 +1344,10 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent) } } - for (i = 0; i < probe_ent->n_ports; i++) { - const char *emsg = NULL; - -#if 0 /* BIOSen initialize this incorrectly */ - if (!(hpriv->port_map & (1 << i))) - continue; -#endif + for (i = 0; i < probe_ent->n_ports; i++) + ahci_setup_port(&probe_ent->port[i], (unsigned long) mmio, i); - port_mmio = ahci_port_base(mmio, i); - VPRINTK("mmio %p port_mmio %p\n", mmio, port_mmio); - - ahci_setup_port(&probe_ent->port[i], - (unsigned long) mmio, i); - - /* make sure port is not active */ - rc = ahci_deinit_port(port_mmio, hpriv->cap, &emsg); - if (rc) - dev_printk(KERN_WARNING, &pdev->dev, - "%s (%d)\n", emsg, rc); - - /* clear SError */ - tmp = readl(port_mmio + PORT_SCR_ERR); - VPRINTK("PORT_SCR_ERR 0x%x\n", tmp); - writel(tmp, port_mmio + PORT_SCR_ERR); - - /* clear & turn off port IRQ */ - tmp = readl(port_mmio + PORT_IRQ_STAT); - VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp); - if (tmp) - writel(tmp, port_mmio + PORT_IRQ_STAT); - - writel(1 << i, mmio + HOST_IRQ_STAT); - writel(0, port_mmio + PORT_IRQ_MASK); - } - - tmp = readl(mmio + HOST_CTL); - VPRINTK("HOST_CTL 0x%x\n", tmp); - writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL); - tmp = readl(mmio + HOST_CTL); - VPRINTK("HOST_CTL 0x%x\n", tmp); + ahci_init_controller(mmio, pdev, probe_ent->n_ports, hpriv->cap); pci_set_master(pdev); -- cgit v1.2.3 From c1332875cbe0c148c7f200d4f9b36b64e34d9872 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 26 Jul 2006 15:59:26 +0900 Subject: [PATCH] ahci: implement Power Management support Implement power management support. Original implementation is from Zhao, Forrest Signed-off-by: Tejun Heo Signed-off-by: Zhao, Forrest Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 84 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 84 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index a9e0c5f7909..909a4dc79d0 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -215,6 +215,10 @@ static void ahci_freeze(struct ata_port *ap); static void ahci_thaw(struct ata_port *ap); static void ahci_error_handler(struct ata_port *ap); static void ahci_post_internal_cmd(struct ata_queued_cmd *qc); +static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg); +static int ahci_port_resume(struct ata_port *ap); +static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); +static int ahci_pci_device_resume(struct pci_dev *pdev); static void ahci_remove_one (struct pci_dev *pdev); static struct scsi_host_template ahci_sht = { @@ -234,6 +238,8 @@ static struct scsi_host_template ahci_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, + .suspend = ata_scsi_device_suspend, + .resume = ata_scsi_device_resume, }; static const struct ata_port_operations ahci_ops = { @@ -260,6 +266,9 @@ static const struct ata_port_operations ahci_ops = { .error_handler = ahci_error_handler, .post_internal_cmd = ahci_post_internal_cmd, + .port_suspend = ahci_port_suspend, + .port_resume = ahci_port_resume, + .port_start = ahci_port_start, .port_stop = ahci_port_stop, }; @@ -361,6 +370,8 @@ static struct pci_driver ahci_pci_driver = { .name = DRV_NAME, .id_table = ahci_pci_tbl, .probe = ahci_init_one, + .suspend = ahci_pci_device_suspend, + .resume = ahci_pci_device_resume, .remove = ahci_remove_one, }; @@ -1199,6 +1210,79 @@ static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) } } +static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg) +{ + struct ahci_host_priv *hpriv = ap->host_set->private_data; + struct ahci_port_priv *pp = ap->private_data; + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + const char *emsg = NULL; + int rc; + + rc = ahci_deinit_port(port_mmio, hpriv->cap, &emsg); + if (rc) { + ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc); + ahci_init_port(port_mmio, hpriv->cap, + pp->cmd_slot_dma, pp->rx_fis_dma); + } + + return rc; +} + +static int ahci_port_resume(struct ata_port *ap) +{ + struct ahci_port_priv *pp = ap->private_data; + struct ahci_host_priv *hpriv = ap->host_set->private_data; + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + + ahci_init_port(port_mmio, hpriv->cap, pp->cmd_slot_dma, pp->rx_fis_dma); + + return 0; +} + +static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) +{ + struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); + void __iomem *mmio = host_set->mmio_base; + u32 ctl; + + if (mesg.event == PM_EVENT_SUSPEND) { + /* AHCI spec rev1.1 section 8.3.3: + * Software must disable interrupts prior to requesting a + * transition of the HBA to D3 state. + */ + ctl = readl(mmio + HOST_CTL); + ctl &= ~HOST_IRQ_EN; + writel(ctl, mmio + HOST_CTL); + readl(mmio + HOST_CTL); /* flush */ + } + + return ata_pci_device_suspend(pdev, mesg); +} + +static int ahci_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); + struct ahci_host_priv *hpriv = host_set->private_data; + void __iomem *mmio = host_set->mmio_base; + int rc; + + ata_pci_device_do_resume(pdev); + + if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { + rc = ahci_reset_controller(mmio, pdev); + if (rc) + return rc; + + ahci_init_controller(mmio, pdev, host_set->n_ports, hpriv->cap); + } + + ata_host_set_resume(host_set); + + return 0; +} + static int ahci_port_start(struct ata_port *ap) { struct device *dev = ap->host_set->dev; -- cgit v1.2.3 From 3c5100c1c40cc5e27b4da4a736994c76d93392a0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 26 Jul 2006 16:58:33 +0900 Subject: [PATCH] libata: cosmetic changes to PM functions Unify pm_message_t argument to the new-style @mesg. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 12 ++++++------ drivers/scsi/libata-scsi.c | 8 ++++---- 2 files changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 386e5f21e19..66feebdb01c 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5767,11 +5767,11 @@ int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits) return (tmp == bits->val) ? 1 : 0; } -void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t state) +void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg) { pci_save_state(pdev); - if (state.event == PM_EVENT_SUSPEND) { + if (mesg.event == PM_EVENT_SUSPEND) { pci_disable_device(pdev); pci_set_power_state(pdev, PCI_D3hot); } @@ -5785,24 +5785,24 @@ void ata_pci_device_do_resume(struct pci_dev *pdev) pci_set_master(pdev); } -int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state) +int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) { struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); int rc = 0; - rc = ata_host_set_suspend(host_set, state); + rc = ata_host_set_suspend(host_set, mesg); if (rc) return rc; if (host_set->next) { - rc = ata_host_set_suspend(host_set->next, state); + rc = ata_host_set_suspend(host_set->next, mesg); if (rc) { ata_host_set_resume(host_set); return rc; } } - ata_pci_device_do_suspend(pdev, state); + ata_pci_device_do_suspend(pdev, mesg); return 0; } diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 7ced41ecde8..1638e57028c 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -400,7 +400,7 @@ void ata_dump_status(unsigned id, struct ata_taskfile *tf) /** * ata_scsi_device_suspend - suspend ATA device associated with sdev * @sdev: the SCSI device to suspend - * @state: target power management state + * @mesg: target power management message * * Request suspend EH action on the ATA device associated with * @sdev and wait for the operation to complete. @@ -411,7 +411,7 @@ void ata_dump_status(unsigned id, struct ata_taskfile *tf) * RETURNS: * 0 on success, -errno otherwise. */ -int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state) +int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t mesg) { struct ata_port *ap = ata_shost_to_port(sdev->host); struct ata_device *dev = ata_scsi_find_dev(ap, sdev); @@ -438,7 +438,7 @@ int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state) /* request suspend */ action = ATA_EH_SUSPEND; - if (state.event != PM_EVENT_SUSPEND) + if (mesg.event != PM_EVENT_SUSPEND) action |= ATA_EH_PM_FREEZE; ap->eh_info.dev_action[dev->devno] |= action; ap->eh_info.flags |= ATA_EHI_QUIET; @@ -463,7 +463,7 @@ int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state) spin_unlock_irqrestore(ap->lock, flags); out: if (rc == 0) - sdev->sdev_gendev.power.power_state = state; + sdev->sdev_gendev.power.power_state = mesg; return rc; } -- cgit v1.2.3 From 95916edd02e3a7752315422f386c55723d4a3637 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 29 Jul 2006 04:10:14 -0400 Subject: [libata] ahci: add SiS PCI IDs Signed-off-by: David Wang Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 909a4dc79d0..35058f9296d 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -362,6 +362,14 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VENDOR_ID_NVIDIA, 0x044f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_ahci }, /* MCP65 */ + /* SiS */ + { PCI_VENDOR_ID_SI, 0x1184, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* SiS 966 */ + { PCI_VENDOR_ID_SI, 0x1185, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* SiS 966 */ + { PCI_VENDOR_ID_SI, 0x0186, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* SiS 968 */ + { } /* terminate list */ }; -- cgit v1.2.3 From b03732f006bd1ecee32587ec8235c41af5ad905f Mon Sep 17 00:00:00 2001 From: Brian King Date: Mon, 7 Aug 2006 14:27:10 -0500 Subject: [PATCH] libata: Add ata_host_set_init Add ata_host_set_init in preparation for SAS attached SATA. Signed-off-by: Brian King Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 28 ++++++++++++++++++++++++---- 1 file changed, 24 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 351544d3653..886440b128a 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5350,6 +5350,28 @@ err_out: return NULL; } +/** + * ata_sas_host_init - Initialize a host_set struct + * @host_set: host_set to initialize + * @dev: device host_set is attached to + * @flags: host_set flags + * @ops: port_ops + * + * LOCKING: + * PCI/etc. bus probe sem. + * + */ + +void ata_host_set_init(struct ata_host_set *host_set, + struct device *dev, unsigned long flags, + const struct ata_port_operations *ops) +{ + spin_lock_init(&host_set->lock); + host_set->dev = dev; + host_set->flags = flags; + host_set->ops = ops; +} + /** * ata_device_add - Register hardware device with ATA and SCSI layers * @ent: Probe information describing hardware device to be registered @@ -5381,15 +5403,12 @@ int ata_device_add(const struct ata_probe_ent *ent) (ent->n_ports * sizeof(void *)), GFP_KERNEL); if (!host_set) return 0; - spin_lock_init(&host_set->lock); - host_set->dev = dev; + ata_host_set_init(host_set, dev, ent->host_set_flags, ent->port_ops); host_set->n_ports = ent->n_ports; host_set->irq = ent->irq; host_set->mmio_base = ent->mmio_base; host_set->private_data = ent->private_data; - host_set->ops = ent->port_ops; - host_set->flags = ent->host_set_flags; /* register each port bound to this device */ for (i = 0; i < ent->n_ports; i++) { @@ -5908,6 +5927,7 @@ EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug); EXPORT_SYMBOL_GPL(sata_deb_timing_long); EXPORT_SYMBOL_GPL(ata_std_bios_param); EXPORT_SYMBOL_GPL(ata_std_ports); +EXPORT_SYMBOL_GPL(ata_host_set_init); EXPORT_SYMBOL_GPL(ata_device_add); EXPORT_SYMBOL_GPL(ata_port_detach); EXPORT_SYMBOL_GPL(ata_host_set_remove); -- cgit v1.2.3 From 155a8a9c8f4084016d9e27bf03ba1f19201438f4 Mon Sep 17 00:00:00 2001 From: Brian King Date: Mon, 7 Aug 2006 14:27:17 -0500 Subject: [PATCH] libata: Add ata_port_init Separate out the ata_port initialization from ata_host_init so that it can be used in future SAS patches. Signed-off-by: Brian King Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 49 ++++++++++++++++++++++++++++++++-------------- drivers/scsi/libata.h | 2 ++ 2 files changed, 36 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 886440b128a..f553c9dd962 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5218,35 +5218,25 @@ void ata_dev_init(struct ata_device *dev) } /** - * ata_host_init - Initialize an ata_port structure + * ata_port_init - Initialize an ata_port structure * @ap: Structure to initialize - * @host: associated SCSI mid-layer structure * @host_set: Collection of hosts to which @ap belongs * @ent: Probe information provided by low-level driver * @port_no: Port number associated with this ata_port * - * Initialize a new ata_port structure, and its associated - * scsi_host. + * Initialize a new ata_port structure. * * LOCKING: * Inherited from caller. */ -static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, - struct ata_host_set *host_set, - const struct ata_probe_ent *ent, unsigned int port_no) +void ata_port_init(struct ata_port *ap, struct ata_host_set *host_set, + const struct ata_probe_ent *ent, unsigned int port_no) { unsigned int i; - host->max_id = 16; - host->max_lun = 1; - host->max_channel = 1; - host->unique_id = ata_unique_id++; - host->max_cmd_len = 12; - ap->lock = &host_set->lock; ap->flags = ATA_FLAG_DISABLED; - ap->id = host->unique_id; - ap->host = host; + ap->id = ata_unique_id++; ap->ctl = ATA_DEVCTL_OBS; ap->host_set = host_set; ap->dev = ent->dev; @@ -5297,6 +5287,35 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, memcpy(&ap->ioaddr, &ent->port[port_no], sizeof(struct ata_ioports)); } +/** + * ata_host_init - Initialize an ata_port structure + * @ap: Structure to initialize + * @host: associated SCSI mid-layer structure + * @host_set: Collection of hosts to which @ap belongs + * @ent: Probe information provided by low-level driver + * @port_no: Port number associated with this ata_port + * + * Initialize a new ata_port structure, and its associated + * scsi_host. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, + struct ata_host_set *host_set, + const struct ata_probe_ent *ent, unsigned int port_no) +{ + ata_port_init(ap, host_set, ent, port_no); + ap->host = host; + + host->unique_id = ap->id; + host->max_id = 16; + host->max_lun = 1; + host->max_channel = 1; + host->max_cmd_len = 12; +} + /** * ata_host_add - Attach low-level ATA driver to system * @ent: Information provided by low-level driver diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index c325679d9b5..b38aa4a286b 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -69,6 +69,8 @@ extern int ata_flush_cache(struct ata_device *dev); extern void ata_dev_init(struct ata_device *dev); extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg); extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg); +extern void ata_port_init(struct ata_port *ap, struct ata_host_set *host_set, + const struct ata_probe_ent *ent, unsigned int port_no); /* libata-scsi.c */ -- cgit v1.2.3 From f6d950e2a5209bd7e3fb1a238f43f24f3697f5b0 Mon Sep 17 00:00:00 2001 From: Brian King Date: Mon, 7 Aug 2006 14:27:24 -0500 Subject: [PATCH] libata: Move ata_probe_ent_alloc to libata_core Move ata_probe_ent_alloc to libata-core. It will also be used by future SAS/SATA integration patches. Signed-off-by: Brian King Signed-off-by: Jeff Garzik --- drivers/scsi/libata-bmdma.c | 26 -------------------------- drivers/scsi/libata-core.c | 25 +++++++++++++++++++++++++ drivers/scsi/libata.h | 2 ++ 3 files changed, 27 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-bmdma.c b/drivers/scsi/libata-bmdma.c index 9ce221f2595..3268cf5375e 100644 --- a/drivers/scsi/libata-bmdma.c +++ b/drivers/scsi/libata-bmdma.c @@ -797,32 +797,6 @@ void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc) } #ifdef CONFIG_PCI -static struct ata_probe_ent * -ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port) -{ - struct ata_probe_ent *probe_ent; - - probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); - if (!probe_ent) { - printk(KERN_ERR DRV_NAME "(%s): out of memory\n", - kobject_name(&(dev->kobj))); - return NULL; - } - - INIT_LIST_HEAD(&probe_ent->node); - probe_ent->dev = dev; - - probe_ent->sht = port->sht; - probe_ent->host_flags = port->host_flags; - probe_ent->pio_mask = port->pio_mask; - probe_ent->mwdma_mask = port->mwdma_mask; - probe_ent->udma_mask = port->udma_mask; - probe_ent->port_ops = port->port_ops; - - return probe_ent; -} - - /** * ata_pci_init_native_mode - Initialize native-mode driver * @pdev: pci device to be initialized diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index f553c9dd962..dc35cccd289 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5688,6 +5688,31 @@ int ata_scsi_release(struct Scsi_Host *host) return 1; } +struct ata_probe_ent * +ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port) +{ + struct ata_probe_ent *probe_ent; + + probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); + if (!probe_ent) { + printk(KERN_ERR DRV_NAME "(%s): out of memory\n", + kobject_name(&(dev->kobj))); + return NULL; + } + + INIT_LIST_HEAD(&probe_ent->node); + probe_ent->dev = dev; + + probe_ent->sht = port->sht; + probe_ent->host_flags = port->host_flags; + probe_ent->pio_mask = port->pio_mask; + probe_ent->mwdma_mask = port->mwdma_mask; + probe_ent->udma_mask = port->udma_mask; + probe_ent->port_ops = port->port_ops; + + return probe_ent; +} + /** * ata_std_ports - initialize ioaddr with standard port offsets. * @ioaddr: IO address structure to be initialized diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index b38aa4a286b..0b7a37c2785 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -71,6 +71,8 @@ extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg); extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg); extern void ata_port_init(struct ata_port *ap, struct ata_host_set *host_set, const struct ata_probe_ent *ent, unsigned int port_no); +extern struct ata_probe_ent *ata_probe_ent_alloc(struct device *dev, + const struct ata_port_info *port); /* libata-scsi.c */ -- cgit v1.2.3 From 80289167fd3ebaeb7b2641e69cbec44b61165fe7 Mon Sep 17 00:00:00 2001 From: Brian King Date: Mon, 7 Aug 2006 14:27:31 -0500 Subject: [PATCH] libata: Add support for SATA attachment to SAS adapters The following patch enhances libata to allow SAS device drivers to utilize libata to talk to SATA devices. It introduces some new APIs which allow libata to be used without allocating a virtual scsi host. New APIs: ata_sas_port_alloc - Allocate an ata_port ata_sas_port_init - Initialize an ata_port (probe device, etc) ata_sas_port_destroy - Free an ata_port allocated by ata_sas_port_alloc ata_sas_slave_configure - configure scsi device ata_sas_queuecmd - queue a scsi command, similar to ata_scsi_queuecomand These new APIs can be used either directly by a SAS LLDD or could be used by the SAS transport class. Possible usage for a SAS LLDD would be: scsi_scan_host target_alloc ata_sas_port_alloc slave_alloc ata_sas_port_init slave_configure ata_sas_slave_configure Commands received by the LLDD for SATA devices would call ata_sas_queuecmd. Device teardown would occur with: slave_destroy port_disable target_destroy ata_sas_port_destroy Signed-off-by: Brian King Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 2 +- drivers/scsi/libata-scsi.c | 149 +++++++++++++++++++++++++++++++++++++++++++++ drivers/scsi/libata.h | 1 + 3 files changed, 151 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index dc35cccd289..83d93fc0751 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1528,7 +1528,7 @@ err_out_nosup: * Zero on success, negative errno otherwise. */ -static int ata_bus_probe(struct ata_port *ap) +int ata_bus_probe(struct ata_port *ap) { unsigned int classes[ATA_MAX_DEVICES]; int tries[ATA_MAX_DEVICES]; diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 1638e57028c..37ec0266143 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -3158,3 +3158,152 @@ void ata_scsi_dev_rescan(void *data) scsi_rescan_device(&(dev->sdev->sdev_gendev)); } } + +/** + * ata_sas_port_alloc - Allocate port for a SAS attached SATA device + * @pdev: PCI device that the scsi device is attached to + * @port_info: Information from low-level host driver + * @host: SCSI host that the scsi device is attached to + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * ata_port pointer on success / NULL on failure. + */ + +struct ata_port *ata_sas_port_alloc(struct ata_host_set *host_set, + struct ata_port_info *port_info, + struct Scsi_Host *host) +{ + struct ata_port *ap = kzalloc(sizeof(*ap), GFP_KERNEL); + struct ata_probe_ent *ent; + + if (!ap) + return NULL; + + ent = ata_probe_ent_alloc(host_set->dev, port_info); + if (!ent) { + kfree(ap); + return NULL; + } + + ata_port_init(ap, host_set, ent, 0); + ap->lock = host->host_lock; + kfree(ent); + return ap; +} +EXPORT_SYMBOL_GPL(ata_sas_port_alloc); + +/** + * ata_sas_port_start - Set port up for dma. + * @ap: Port to initialize + * + * Called just after data structures for each port are + * initialized. Allocates DMA pad. + * + * May be used as the port_start() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +int ata_sas_port_start(struct ata_port *ap) +{ + return ata_pad_alloc(ap, ap->dev); +} +EXPORT_SYMBOL_GPL(ata_sas_port_start); + +/** + * ata_port_stop - Undo ata_sas_port_start() + * @ap: Port to shut down + * + * Frees the DMA pad. + * + * May be used as the port_stop() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ + +void ata_sas_port_stop(struct ata_port *ap) +{ + ata_pad_free(ap, ap->dev); +} +EXPORT_SYMBOL_GPL(ata_sas_port_stop); + +/** + * ata_sas_port_init - Initialize a SATA device + * @ap: SATA port to initialize + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * Zero on success, non-zero on error. + */ + +int ata_sas_port_init(struct ata_port *ap) +{ + int rc = ap->ops->port_start(ap); + + if (!rc) + rc = ata_bus_probe(ap); + + return rc; +} +EXPORT_SYMBOL_GPL(ata_sas_port_init); + +/** + * ata_sas_port_destroy - Destroy a SATA port allocated by ata_sas_port_alloc + * @ap: SATA port to destroy + * + */ + +void ata_sas_port_destroy(struct ata_port *ap) +{ + ap->ops->port_stop(ap); + kfree(ap); +} +EXPORT_SYMBOL_GPL(ata_sas_port_destroy); + +/** + * ata_sas_slave_configure - Default slave_config routine for libata devices + * @sdev: SCSI device to configure + * @ap: ATA port to which SCSI device is attached + * + * RETURNS: + * Zero. + */ + +int ata_sas_slave_configure(struct scsi_device *sdev, struct ata_port *ap) +{ + ata_scsi_sdev_config(sdev); + ata_scsi_dev_config(sdev, ap->device); + return 0; +} +EXPORT_SYMBOL_GPL(ata_sas_slave_configure); + +/** + * ata_sas_queuecmd - Issue SCSI cdb to libata-managed device + * @cmd: SCSI command to be sent + * @done: Completion function, called when command is complete + * @ap: ATA port to which the command is being sent + * + * RETURNS: + * Zero. + */ + +int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), + struct ata_port *ap) +{ + ata_scsi_dump_cdb(ap, cmd); + + if (likely(ata_scsi_dev_enabled(ap->device))) + __ata_scsi_queuecmd(cmd, done, ap->device); + else { + cmd->result = (DID_BAD_TARGET << 16); + done(cmd); + } + return 0; +} +EXPORT_SYMBOL_GPL(ata_sas_queuecmd); diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 0b7a37c2785..d4a4f82360e 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -111,6 +111,7 @@ extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen)); extern void ata_schedule_scsi_eh(struct Scsi_Host *shost); extern void ata_scsi_dev_rescan(void *data); +extern int ata_bus_probe(struct ata_port *ap); /* libata-eh.c */ extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd); -- cgit v1.2.3 From f4b5cc874158a139c091b3decd468929e10645e6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 7 Aug 2006 11:39:04 +0900 Subject: [PATCH] ahci: remove IRQ mask clearing from init_controller() Initial IRQ mask clearing is done by libata-core by freezing all ports prior to requesting IRQ. Remove redundant IRQ clearing from init_controller(). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index f5734a97580..68fd7667a08 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -662,14 +662,13 @@ static void ahci_init_controller(void __iomem *mmio, struct pci_dev *pdev, VPRINTK("PORT_SCR_ERR 0x%x\n", tmp); writel(tmp, port_mmio + PORT_SCR_ERR); - /* clear & turn off port IRQ */ + /* clear port IRQ */ tmp = readl(port_mmio + PORT_IRQ_STAT); VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp); if (tmp) writel(tmp, port_mmio + PORT_IRQ_STAT); writel(1 << i, mmio + HOST_IRQ_STAT); - writel(0, port_mmio + PORT_IRQ_MASK); } tmp = readl(mmio + HOST_CTL); -- cgit v1.2.3 From 4608c1608501cf2b0dc4478c9b6c3902db58408a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 10 Aug 2006 16:59:01 +0900 Subject: [PATCH] libata: update ata_host_init() and rename it to ata_port_init_shost() Update ata_host_init() such that it only initializes SCSI host related stuff and doesn't call into ata_port_init(), and rename it to ata_port_init_shost(). Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 33 +++++++++++++-------------------- 1 file changed, 13 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 83d93fc0751..eb9de073639 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5288,32 +5288,24 @@ void ata_port_init(struct ata_port *ap, struct ata_host_set *host_set, } /** - * ata_host_init - Initialize an ata_port structure - * @ap: Structure to initialize - * @host: associated SCSI mid-layer structure - * @host_set: Collection of hosts to which @ap belongs - * @ent: Probe information provided by low-level driver - * @port_no: Port number associated with this ata_port + * ata_port_init_shost - Initialize SCSI host associated with ATA port + * @ap: ATA port to initialize SCSI host for + * @shost: SCSI host associated with @ap * - * Initialize a new ata_port structure, and its associated - * scsi_host. + * Initialize SCSI host @shost associated with ATA port @ap. * * LOCKING: * Inherited from caller. */ - -static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, - struct ata_host_set *host_set, - const struct ata_probe_ent *ent, unsigned int port_no) +static void ata_port_init_shost(struct ata_port *ap, struct Scsi_Host *shost) { - ata_port_init(ap, host_set, ent, port_no); - ap->host = host; + ap->host = shost; - host->unique_id = ap->id; - host->max_id = 16; - host->max_lun = 1; - host->max_channel = 1; - host->max_cmd_len = 12; + shost->unique_id = ap->id; + shost->max_id = 16; + shost->max_lun = 1; + shost->max_channel = 1; + shost->max_cmd_len = 12; } /** @@ -5356,7 +5348,8 @@ static struct ata_port * ata_host_add(const struct ata_probe_ent *ent, ap = ata_shost_to_port(host); - ata_host_init(ap, host, host_set, ent, port_no); + ata_port_init(ap, host_set, ent, port_no); + ata_port_init_shost(ap, host); rc = ap->ops->port_start(ap); if (rc) -- cgit v1.2.3 From 996139f1ce50c56c5e66f86b6aba17ff5ea00b86 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 10 Aug 2006 16:59:03 +0900 Subject: [PATCH] [libata] some function renaming s/ata_host_add/ata_port_add/ s/ata_host_init/ata_port_init/ libata naming got stuck in the middle of a Great Renaming: ata_host -> ata_port ata_host_set -> ata_host To eliminate confusion, let's just give up for now, and simply ensure that things are internally consistent. Signed-off-by: Jeff Garzik Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index eb9de073639..3aa477a3302 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5309,7 +5309,7 @@ static void ata_port_init_shost(struct ata_port *ap, struct Scsi_Host *shost) } /** - * ata_host_add - Attach low-level ATA driver to system + * ata_port_add - Attach low-level ATA driver to system * @ent: Information provided by low-level driver * @host_set: Collections of ports to which we add * @port_no: Port number associated with this host @@ -5322,12 +5322,11 @@ static void ata_port_init_shost(struct ata_port *ap, struct Scsi_Host *shost) * RETURNS: * New ata_port on success, for NULL on error. */ - -static struct ata_port * ata_host_add(const struct ata_probe_ent *ent, +static struct ata_port * ata_port_add(const struct ata_probe_ent *ent, struct ata_host_set *host_set, unsigned int port_no) { - struct Scsi_Host *host; + struct Scsi_Host *shost; struct ata_port *ap; int rc; @@ -5340,16 +5339,16 @@ static struct ata_port * ata_host_add(const struct ata_probe_ent *ent, return NULL; } - host = scsi_host_alloc(ent->sht, sizeof(struct ata_port)); - if (!host) + shost = scsi_host_alloc(ent->sht, sizeof(struct ata_port)); + if (!shost) return NULL; - host->transportt = &ata_scsi_transport_template; + shost->transportt = &ata_scsi_transport_template; - ap = ata_shost_to_port(host); + ap = ata_shost_to_port(shost); ata_port_init(ap, host_set, ent, port_no); - ata_port_init_shost(ap, host); + ata_port_init_shost(ap, shost); rc = ap->ops->port_start(ap); if (rc) @@ -5358,7 +5357,7 @@ static struct ata_port * ata_host_add(const struct ata_probe_ent *ent, return ap; err_out: - scsi_host_put(host); + scsi_host_put(shost); return NULL; } @@ -5427,7 +5426,7 @@ int ata_device_add(const struct ata_probe_ent *ent) struct ata_port *ap; unsigned long xfer_mode_mask; - ap = ata_host_add(ent, host_set, i); + ap = ata_port_add(ent, host_set, i); if (!ap) goto err_out; -- cgit v1.2.3 From 6d0500df5b37c94b779ac2c3f522ff917e039f99 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 10 Aug 2006 16:59:05 +0900 Subject: [PATCH] [libata] Kill 'count' var in ata_device_add() Eliminate redundant loop variable 'count' Signed-off-by: Jeff Garzik Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 20 +++++++------------- 1 file changed, 7 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 3aa477a3302..38fc75d6b39 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5403,7 +5403,7 @@ void ata_host_set_init(struct ata_host_set *host_set, */ int ata_device_add(const struct ata_probe_ent *ent) { - unsigned int count = 0, i; + unsigned int i; struct device *dev = ent->dev; struct ata_host_set *host_set; int rc; @@ -5422,7 +5422,7 @@ int ata_device_add(const struct ata_probe_ent *ent) host_set->private_data = ent->private_data; /* register each port bound to this device */ - for (i = 0; i < ent->n_ports; i++) { + for (i = 0; i < host_set->n_ports; i++) { struct ata_port *ap; unsigned long xfer_mode_mask; @@ -5448,12 +5448,8 @@ int ata_device_add(const struct ata_probe_ent *ent) ata_chk_status(ap); host_set->ops->irq_clear(ap); ata_eh_freeze_port(ap); /* freeze port before requesting IRQ */ - count++; } - if (!count) - goto err_free_ret; - /* obtain irq, that is shared between channels */ rc = request_irq(ent->irq, ent->port_ops->irq_handler, ent->irq_flags, DRV_NAME, host_set); @@ -5465,13 +5461,11 @@ int ata_device_add(const struct ata_probe_ent *ent) /* perform each probe synchronously */ DPRINTK("probe begin\n"); - for (i = 0; i < count; i++) { - struct ata_port *ap; + for (i = 0; i < host_set->n_ports; i++) { + struct ata_port *ap = host_set->ports[i]; u32 scontrol; int rc; - ap = host_set->ports[i]; - /* init sata_spd_limit to the current value */ if (sata_scr_read(ap, SCR_CONTROL, &scontrol) == 0) { int spd = (scontrol >> 4) & 0xf; @@ -5527,7 +5521,7 @@ int ata_device_add(const struct ata_probe_ent *ent) /* probes are done, now scan each port's disk(s) */ DPRINTK("host probe begin\n"); - for (i = 0; i < count; i++) { + for (i = 0; i < host_set->n_ports; i++) { struct ata_port *ap = host_set->ports[i]; ata_scsi_scan_host(ap); @@ -5539,14 +5533,14 @@ int ata_device_add(const struct ata_probe_ent *ent) return ent->n_ports; /* success */ err_out: - for (i = 0; i < count; i++) { + for (i = 0; i < host_set->n_ports; i++) { struct ata_port *ap = host_set->ports[i]; if (ap) { ap->ops->port_stop(ap); scsi_host_put(ap->host); } } -err_free_ret: + kfree(host_set); VPRINTK("EXIT, returning 0\n"); return 0; -- cgit v1.2.3 From 37deecb5139ee431233781a9a093d9fcaab54c5b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 10 Aug 2006 16:59:07 +0900 Subject: [PATCH] libata: implement per-dev xfermask Implement per-dev xfermask. libata used to determine xfermask per-port - the fastest mode of the slowest device on the port. This patch enables per-dev xfermask. Original patch is from Alan Cox . The following changes are made by me. * simplex warning message is added * remove disabled device handling code which is never invoked (originally for choosing port-wide lowest PIO mode) Cc: Alan Cox Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 40 +++++++++++----------------------------- 1 file changed, 11 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 38fc75d6b39..4e6c2e8ac0f 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3040,10 +3040,6 @@ static int ata_dma_blacklisted(const struct ata_device *dev) * known limits including host controller limits, device * blacklist, etc... * - * FIXME: The current implementation limits all transfer modes to - * the fastest of the lowested device on the port. This is not - * required on most controllers. - * * LOCKING: * None. */ @@ -3052,8 +3048,8 @@ static void ata_dev_xfermask(struct ata_device *dev) struct ata_port *ap = dev->ap; struct ata_host_set *hs = ap->host_set; unsigned long xfer_mask; - int i; + /* controller modes available */ xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask, ap->udma_mask); @@ -3063,34 +3059,20 @@ static void ata_dev_xfermask(struct ata_device *dev) if (ap->cbl == ATA_CBL_PATA40) xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA); - /* FIXME: Use port-wide xfermask for now */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *d = &ap->device[i]; - - if (ata_dev_absent(d)) - continue; + xfer_mask &= ata_pack_xfermask(dev->pio_mask, + dev->mwdma_mask, dev->udma_mask); + xfer_mask &= ata_id_xfermask(dev->id); - if (ata_dev_disabled(d)) { - /* to avoid violating device selection timing */ - xfer_mask &= ata_pack_xfermask(d->pio_mask, - UINT_MAX, UINT_MAX); - continue; - } - - xfer_mask &= ata_pack_xfermask(d->pio_mask, - d->mwdma_mask, d->udma_mask); - xfer_mask &= ata_id_xfermask(d->id); - if (ata_dma_blacklisted(d)) - xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); - } - - if (ata_dma_blacklisted(dev)) + if (ata_dma_blacklisted(dev)) { + xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); ata_dev_printk(dev, KERN_WARNING, "device is on DMA blacklist, disabling DMA\n"); + } - if (hs->flags & ATA_HOST_SIMPLEX) { - if (hs->simplex_claimed) - xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + if ((hs->flags & ATA_HOST_SIMPLEX) && hs->simplex_claimed) { + xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + ata_dev_printk(dev, KERN_WARNING, "simplex DMA is claimed by " + "other device, disabling DMA\n"); } if (ap->ops->mode_filter) -- cgit v1.2.3 From 2ec7df0457b710d9201f211dbccdbecf0ad38b7e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 10 Aug 2006 16:59:10 +0900 Subject: [PATCH] libata: rework legacy handling to remove much of the cruft Kill host_set->next Fix simplex support Allow per platform setting of IDE legacy bases Some of this can be tidied further later on, in particular all the legacy port gunge belongs as a PCI quirk/PCI header decode to understand the special legacy IDE rules in the PCI spec. Longer term Jeff also wants to move the request_irq/free_irq out of core which will make this even cleaner. tj: folded in three followup patches - ata_piix-fix, broken-arch-fix and fix-new-legacy-handling, and separated per-dev xfermask into separate patch preceding this one. Folded in fixes are... * ata_piix-fix: fix build failure due to host_set->next removal * broken-arch-fix: add missing include/asm-*/libata-portmap.h * fix-new-legacy-handling: * In ata_pci_init_legacy_port(), probe_num was incorrectly incremented during initialization of the secondary port and probe_ent->n_ports was incorrectly fixed to 1. * Both legacy ports ended up having the same hard_port_no. * When printing port information, both legacy ports printed the first irq. Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Tejun Heo --- drivers/scsi/ata_piix.c | 2 - drivers/scsi/libata-bmdma.c | 135 +++++++++++++++++++++----------------------- drivers/scsi/libata-core.c | 59 +++++++++++-------- 3 files changed, 100 insertions(+), 96 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 5e8afc87698..40ecab5793e 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -932,8 +932,6 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) static void piix_host_stop(struct ata_host_set *host_set) { - if (host_set->next == NULL) - kfree(host_set->private_data); ata_host_stop(host_set); } diff --git a/drivers/scsi/libata-bmdma.c b/drivers/scsi/libata-bmdma.c index 3268cf5375e..e694f6075c3 100644 --- a/drivers/scsi/libata-bmdma.c +++ b/drivers/scsi/libata-bmdma.c @@ -854,7 +854,7 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int if (bmdma) { bmdma += 8; if(inb(bmdma + 2) & 0x80) - probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; + probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; probe_ent->port[p].bmdma_addr = bmdma; } ata_std_ports(&probe_ent->port[p]); @@ -867,44 +867,55 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, - struct ata_port_info *port, int port_num) + struct ata_port_info **port, int port_mask) { struct ata_probe_ent *probe_ent; - unsigned long bmdma; + unsigned long bmdma = pci_resource_start(pdev, 4); - probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port); + int port_num = 0; + + probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); if (!probe_ent) return NULL; probe_ent->legacy_mode = 1; - probe_ent->n_ports = 1; - probe_ent->hard_port_no = port_num; - probe_ent->private_data = port->private_data; - - switch(port_num) - { - case 0: - probe_ent->irq = 14; - probe_ent->port[0].cmd_addr = 0x1f0; - probe_ent->port[0].altstatus_addr = - probe_ent->port[0].ctl_addr = 0x3f6; - break; - case 1: + probe_ent->hard_port_no = 0; + probe_ent->private_data = port[0]->private_data; + + if (port_mask & ATA_PORT_PRIMARY) { + probe_ent->irq = 14; + probe_ent->port[port_num].cmd_addr = ATA_PRIMARY_CMD; + probe_ent->port[port_num].altstatus_addr = + probe_ent->port[port_num].ctl_addr = ATA_PRIMARY_CTL; + if (bmdma) { + probe_ent->port[0].bmdma_addr = bmdma; + if (inb(bmdma + 2) & 0x80) + probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; + } + ata_std_ports(&probe_ent->port[port_num]); + port_num ++; + } + if (port_mask & ATA_PORT_SECONDARY) { + if (port_num == 1) + probe_ent->irq2 = 15; + else { + /* Secondary only. IRQ 15 only and "first" port is port 1 */ probe_ent->irq = 15; - probe_ent->port[0].cmd_addr = 0x170; - probe_ent->port[0].altstatus_addr = - probe_ent->port[0].ctl_addr = 0x376; - break; + probe_ent->hard_port_no = 1; + } + probe_ent->port[port_num].cmd_addr = ATA_SECONDARY_CMD; + probe_ent->port[port_num].altstatus_addr = + probe_ent->port[port_num].ctl_addr = ATA_SECONDARY_CTL; + if (bmdma) { + probe_ent->port[port_num].bmdma_addr = bmdma + 8; + if (inb(bmdma + 10) & 0x80) + probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; + } + ata_std_ports(&probe_ent->port[port_num]); + port_num ++; } - bmdma = pci_resource_start(pdev, 4); - if (bmdma != 0) { - bmdma += 8 * port_num; - probe_ent->port[0].bmdma_addr = bmdma; - if (inb(bmdma + 2) & 0x80) - probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; - } - ata_std_ports(&probe_ent->port[0]); + probe_ent->n_ports = port_num; return probe_ent; } @@ -924,6 +935,10 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, * regions, sets the dma mask, enables bus master mode, and calls * ata_device_add() * + * ASSUMPTION: + * Nobody makes a single channel controller that appears solely as + * the secondary legacy port on PCI. + * * LOCKING: * Inherited from PCI layer (may sleep). * @@ -934,7 +949,7 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, unsigned int n_ports) { - struct ata_probe_ent *probe_ent = NULL, *probe_ent2 = NULL; + struct ata_probe_ent *probe_ent = NULL; struct ata_port_info *port[2]; u8 tmp8, mask; unsigned int legacy_mode = 0; @@ -983,35 +998,34 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, goto err_out; } - /* FIXME: Should use platform specific mappers for legacy port ranges */ if (legacy_mode) { - if (!request_region(0x1f0, 8, "libata")) { + if (!request_region(ATA_PRIMARY_CMD, 8, "libata")) { struct resource *conflict, res; - res.start = 0x1f0; - res.end = 0x1f0 + 8 - 1; + res.start = ATA_PRIMARY_CMD; + res.end = ATA_PRIMARY_CMD + 8 - 1; conflict = ____request_resource(&ioport_resource, &res); if (!strcmp(conflict->name, "libata")) - legacy_mode |= (1 << 0); + legacy_mode |= ATA_PORT_PRIMARY; else { disable_dev_on_err = 0; - printk(KERN_WARNING "ata: 0x1f0 IDE port busy\n"); + printk(KERN_WARNING "ata: 0x%0X IDE port busy\n", ATA_PRIMARY_CMD); } } else - legacy_mode |= (1 << 0); + legacy_mode |= ATA_PORT_PRIMARY; - if (!request_region(0x170, 8, "libata")) { + if (!request_region(ATA_SECONDARY_CMD, 8, "libata")) { struct resource *conflict, res; - res.start = 0x170; - res.end = 0x170 + 8 - 1; + res.start = ATA_SECONDARY_CMD; + res.end = ATA_SECONDARY_CMD + 8 - 1; conflict = ____request_resource(&ioport_resource, &res); if (!strcmp(conflict->name, "libata")) - legacy_mode |= (1 << 1); + legacy_mode |= ATA_PORT_SECONDARY; else { disable_dev_on_err = 0; - printk(KERN_WARNING "ata: 0x170 IDE port busy\n"); + printk(KERN_WARNING "ata: 0x%X IDE port busy\n", ATA_SECONDARY_CMD); } } else - legacy_mode |= (1 << 1); + legacy_mode |= ATA_PORT_SECONDARY; } /* we have legacy mode, but all ports are unavailable */ @@ -1029,17 +1043,14 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, goto err_out_regions; if (legacy_mode) { - if (legacy_mode & (1 << 0)) - probe_ent = ata_pci_init_legacy_port(pdev, port[0], 0); - if (legacy_mode & (1 << 1)) - probe_ent2 = ata_pci_init_legacy_port(pdev, port[1], 1); + probe_ent = ata_pci_init_legacy_port(pdev, port, legacy_mode); } else { if (n_ports == 2) probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); else probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY); } - if (!probe_ent && !probe_ent2) { + if (!probe_ent) { rc = -ENOMEM; goto err_out_regions; } @@ -1047,35 +1058,17 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, pci_set_master(pdev); /* FIXME: check ata_device_add return */ - if (legacy_mode) { - struct device *dev = &pdev->dev; - struct ata_host_set *host_set = NULL; - - if (legacy_mode & (1 << 0)) { - ata_device_add(probe_ent); - host_set = dev_get_drvdata(dev); - } - - if (legacy_mode & (1 << 1)) { - ata_device_add(probe_ent2); - if (host_set) { - host_set->next = dev_get_drvdata(dev); - dev_set_drvdata(dev, host_set); - } - } - } else - ata_device_add(probe_ent); + ata_device_add(probe_ent); kfree(probe_ent); - kfree(probe_ent2); return 0; err_out_regions: - if (legacy_mode & (1 << 0)) - release_region(0x1f0, 8); - if (legacy_mode & (1 << 1)) - release_region(0x170, 8); + if (legacy_mode & ATA_PORT_PRIMARY) + release_region(ATA_PRIMARY_CMD, 8); + if (legacy_mode & ATA_PORT_SECONDARY) + release_region(ATA_SECONDARY_CMD, 8); pci_release_regions(pdev); err_out: if (disable_dev_on_err) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 4e6c2e8ac0f..3634279d896 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5223,8 +5223,9 @@ void ata_port_init(struct ata_port *ap, struct ata_host_set *host_set, ap->host_set = host_set; ap->dev = ent->dev; ap->port_no = port_no; - ap->hard_port_no = - ent->legacy_mode ? ent->hard_port_no : port_no; + ap->hard_port_no = port_no; + if (ent->legacy_mode) + ap->hard_port_no += ent->hard_port_no; ap->pio_mask = ent->pio_mask; ap->mwdma_mask = ent->mwdma_mask; ap->udma_mask = ent->udma_mask; @@ -5400,6 +5401,7 @@ int ata_device_add(const struct ata_probe_ent *ent) ata_host_set_init(host_set, dev, ent->host_set_flags, ent->port_ops); host_set->n_ports = ent->n_ports; host_set->irq = ent->irq; + host_set->irq2 = ent->irq2; host_set->mmio_base = ent->mmio_base; host_set->private_data = ent->private_data; @@ -5407,11 +5409,16 @@ int ata_device_add(const struct ata_probe_ent *ent) for (i = 0; i < host_set->n_ports; i++) { struct ata_port *ap; unsigned long xfer_mode_mask; + int irq_line = ent->irq; ap = ata_port_add(ent, host_set, i); if (!ap) goto err_out; + /* Report the secondary IRQ for second channel legacy */ + if (i == 1 && ent->irq2) + irq_line = ent->irq2; + host_set->ports[i] = ap; xfer_mode_mask =(ap->udma_mask << ATA_SHIFT_UDMA) | (ap->mwdma_mask << ATA_SHIFT_MWDMA) | @@ -5419,20 +5426,20 @@ int ata_device_add(const struct ata_probe_ent *ent) /* print per-port info to dmesg */ ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%lX " - "ctl 0x%lX bmdma 0x%lX irq %lu\n", + "ctl 0x%lX bmdma 0x%lX irq %d\n", ap->flags & ATA_FLAG_SATA ? 'S' : 'P', ata_mode_string(xfer_mode_mask), ap->ioaddr.cmd_addr, ap->ioaddr.ctl_addr, ap->ioaddr.bmdma_addr, - ent->irq); + irq_line); ata_chk_status(ap); host_set->ops->irq_clear(ap); ata_eh_freeze_port(ap); /* freeze port before requesting IRQ */ } - /* obtain irq, that is shared between channels */ + /* obtain irq, that may be shared between channels */ rc = request_irq(ent->irq, ent->port_ops->irq_handler, ent->irq_flags, DRV_NAME, host_set); if (rc) { @@ -5441,6 +5448,21 @@ int ata_device_add(const struct ata_probe_ent *ent) goto err_out; } + /* do we have a second IRQ for the other channel, eg legacy mode */ + if (ent->irq2) { + /* We will get weird core code crashes later if this is true + so trap it now */ + BUG_ON(ent->irq == ent->irq2); + + rc = request_irq(ent->irq2, ent->port_ops->irq_handler, ent->irq_flags, + DRV_NAME, host_set); + if (rc) { + dev_printk(KERN_ERR, dev, "irq %lu request failed: %d\n", + ent->irq2, rc); + goto err_out_free_irq; + } + } + /* perform each probe synchronously */ DPRINTK("probe begin\n"); for (i = 0; i < host_set->n_ports; i++) { @@ -5514,6 +5536,8 @@ int ata_device_add(const struct ata_probe_ent *ent) VPRINTK("EXIT, returning %u\n", ent->n_ports); return ent->n_ports; /* success */ +err_out_free_irq: + free_irq(ent->irq, host_set); err_out: for (i = 0; i < host_set->n_ports; i++) { struct ata_port *ap = host_set->ports[i]; @@ -5605,6 +5629,8 @@ void ata_host_set_remove(struct ata_host_set *host_set) ata_port_detach(host_set->ports[i]); free_irq(host_set->irq, host_set); + if (host_set->irq2) + free_irq(host_set->irq2, host_set); for (i = 0; i < host_set->n_ports; i++) { struct ata_port *ap = host_set->ports[i]; @@ -5614,10 +5640,11 @@ void ata_host_set_remove(struct ata_host_set *host_set) if ((ap->flags & ATA_FLAG_NO_LEGACY) == 0) { struct ata_ioports *ioaddr = &ap->ioaddr; - if (ioaddr->cmd_addr == 0x1f0) - release_region(0x1f0, 8); - else if (ioaddr->cmd_addr == 0x170) - release_region(0x170, 8); + /* FIXME: Add -ac IDE pci mods to remove these special cases */ + if (ioaddr->cmd_addr == ATA_PRIMARY_CMD) + release_region(ATA_PRIMARY_CMD, 8); + else if (ioaddr->cmd_addr == ATA_SECONDARY_CMD) + release_region(ATA_SECONDARY_CMD, 8); } scsi_host_put(ap->host); @@ -5735,11 +5762,8 @@ void ata_pci_remove_one (struct pci_dev *pdev) { struct device *dev = pci_dev_to_dev(pdev); struct ata_host_set *host_set = dev_get_drvdata(dev); - struct ata_host_set *host_set2 = host_set->next; ata_host_set_remove(host_set); - if (host_set2) - ata_host_set_remove(host_set2); pci_release_regions(pdev); pci_disable_device(pdev); @@ -5807,14 +5831,6 @@ int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) if (rc) return rc; - if (host_set->next) { - rc = ata_host_set_suspend(host_set->next, mesg); - if (rc) { - ata_host_set_resume(host_set); - return rc; - } - } - ata_pci_device_do_suspend(pdev, mesg); return 0; @@ -5826,9 +5842,6 @@ int ata_pci_device_resume(struct pci_dev *pdev) ata_pci_device_do_resume(pdev); ata_host_set_resume(host_set); - if (host_set->next) - ata_host_set_resume(host_set->next); - return 0; } #endif /* CONFIG_PCI */ -- cgit v1.2.3 From dd5b06c490de72440ec39f814de99a714a45a1a9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 10 Aug 2006 16:59:12 +0900 Subject: [PATCH] libata: implement dummy port Implement dummy port which can be requested by setting appropriate bit in probe_ent->dummy_port_mask. The dummy port is used as placeholder for stolen legacy port. This allows libata to guarantee that index_of(ap) == ap->port_no == actual_device_port_no, and thus to remove error-prone ap->hard_port_no. As it's used only when one port of a legacy controller is reserved by some other entity (e.g. IDE), the focus is on keeping the added *code* complexity at minimum, so dummy port allocates all libata core resources and acts as a normal port. It just has all dummy port_ops. This patch only implements dummy port. The following patch will make libata use it for stolen legacy ports. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 61 ++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 51 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 3634279d896..f2e7e2f13db 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5311,7 +5311,6 @@ static struct ata_port * ata_port_add(const struct ata_probe_ent *ent, { struct Scsi_Host *shost; struct ata_port *ap; - int rc; DPRINTK("ENTER\n"); @@ -5333,15 +5332,7 @@ static struct ata_port * ata_port_add(const struct ata_probe_ent *ent, ata_port_init(ap, host_set, ent, port_no); ata_port_init_shost(ap, shost); - rc = ap->ops->port_start(ap); - if (rc) - goto err_out; - return ap; - -err_out: - scsi_host_put(shost); - return NULL; } /** @@ -5415,11 +5406,27 @@ int ata_device_add(const struct ata_probe_ent *ent) if (!ap) goto err_out; + host_set->ports[i] = ap; + + /* dummy? */ + if (ent->dummy_port_mask & (1 << i)) { + ata_port_printk(ap, KERN_INFO, "DUMMY\n"); + ap->ops = &ata_dummy_port_ops; + continue; + } + + /* start port */ + rc = ap->ops->port_start(ap); + if (rc) { + host_set->ports[i] = NULL; + scsi_host_put(ap->host); + goto err_out; + } + /* Report the secondary IRQ for second channel legacy */ if (i == 1 && ent->irq2) irq_line = ent->irq2; - host_set->ports[i] = ap; xfer_mode_mask =(ap->udma_mask << ATA_SHIFT_UDMA) | (ap->mwdma_mask << ATA_SHIFT_MWDMA) | (ap->pio_mask << ATA_SHIFT_PIO); @@ -5940,6 +5947,39 @@ u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, return tmp; } +/* + * Dummy port_ops + */ +static void ata_dummy_noret(struct ata_port *ap) { } +static int ata_dummy_ret0(struct ata_port *ap) { return 0; } +static void ata_dummy_qc_noret(struct ata_queued_cmd *qc) { } + +static u8 ata_dummy_check_status(struct ata_port *ap) +{ + return ATA_DRDY; +} + +static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc) +{ + return AC_ERR_SYSTEM; +} + +const struct ata_port_operations ata_dummy_port_ops = { + .port_disable = ata_port_disable, + .check_status = ata_dummy_check_status, + .check_altstatus = ata_dummy_check_status, + .dev_select = ata_noop_dev_select, + .qc_prep = ata_noop_qc_prep, + .qc_issue = ata_dummy_qc_issue, + .freeze = ata_dummy_noret, + .thaw = ata_dummy_noret, + .error_handler = ata_dummy_noret, + .post_internal_cmd = ata_dummy_qc_noret, + .irq_clear = ata_dummy_noret, + .port_start = ata_dummy_ret0, + .port_stop = ata_dummy_noret, +}; + /* * libata is essentially a library of internal helper functions for * low-level ATA host controller drivers. As such, the API/ABI is @@ -5950,6 +5990,7 @@ u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, EXPORT_SYMBOL_GPL(sata_deb_timing_normal); EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug); EXPORT_SYMBOL_GPL(sata_deb_timing_long); +EXPORT_SYMBOL_GPL(ata_dummy_port_ops); EXPORT_SYMBOL_GPL(ata_std_bios_param); EXPORT_SYMBOL_GPL(ata_std_ports); EXPORT_SYMBOL_GPL(ata_host_set_init); -- cgit v1.2.3 From c4b01f1de254820175fe2d02b4cf7c0fab335846 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 10 Aug 2006 16:59:14 +0900 Subject: [PATCH] libata: use dummy port for stolen legacy ports Use dummy port for stolen legacy ports. This makes ap->port_no always equal ap->hard_port_no. Signed-off-by: Tejun Heo --- drivers/scsi/libata-bmdma.c | 41 +++++++++++++++++------------------------ drivers/scsi/libata-core.c | 2 -- 2 files changed, 17 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-bmdma.c b/drivers/scsi/libata-bmdma.c index e694f6075c3..158f62dbf21 100644 --- a/drivers/scsi/libata-bmdma.c +++ b/drivers/scsi/libata-bmdma.c @@ -872,50 +872,43 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, struct ata_probe_ent *probe_ent; unsigned long bmdma = pci_resource_start(pdev, 4); - int port_num = 0; - probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); if (!probe_ent) return NULL; - probe_ent->legacy_mode = 1; - probe_ent->hard_port_no = 0; + probe_ent->n_ports = 2; probe_ent->private_data = port[0]->private_data; if (port_mask & ATA_PORT_PRIMARY) { probe_ent->irq = 14; - probe_ent->port[port_num].cmd_addr = ATA_PRIMARY_CMD; - probe_ent->port[port_num].altstatus_addr = - probe_ent->port[port_num].ctl_addr = ATA_PRIMARY_CTL; + probe_ent->port[0].cmd_addr = ATA_PRIMARY_CMD; + probe_ent->port[0].altstatus_addr = + probe_ent->port[0].ctl_addr = ATA_PRIMARY_CTL; if (bmdma) { probe_ent->port[0].bmdma_addr = bmdma; if (inb(bmdma + 2) & 0x80) probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; } - ata_std_ports(&probe_ent->port[port_num]); - port_num ++; - } + ata_std_ports(&probe_ent->port[0]); + } else + probe_ent->dummy_port_mask |= ATA_PORT_PRIMARY; + if (port_mask & ATA_PORT_SECONDARY) { - if (port_num == 1) + if (probe_ent->irq) probe_ent->irq2 = 15; - else { - /* Secondary only. IRQ 15 only and "first" port is port 1 */ + else probe_ent->irq = 15; - probe_ent->hard_port_no = 1; - } - probe_ent->port[port_num].cmd_addr = ATA_SECONDARY_CMD; - probe_ent->port[port_num].altstatus_addr = - probe_ent->port[port_num].ctl_addr = ATA_SECONDARY_CTL; + probe_ent->port[1].cmd_addr = ATA_SECONDARY_CMD; + probe_ent->port[1].altstatus_addr = + probe_ent->port[1].ctl_addr = ATA_SECONDARY_CTL; if (bmdma) { - probe_ent->port[port_num].bmdma_addr = bmdma + 8; + probe_ent->port[1].bmdma_addr = bmdma + 8; if (inb(bmdma + 10) & 0x80) probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; } - ata_std_ports(&probe_ent->port[port_num]); - port_num ++; - } - - probe_ent->n_ports = port_num; + ata_std_ports(&probe_ent->port[1]); + } else + probe_ent->dummy_port_mask |= ATA_PORT_SECONDARY; return probe_ent; } diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index f2e7e2f13db..2ef86b4e7f6 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5224,8 +5224,6 @@ void ata_port_init(struct ata_port *ap, struct ata_host_set *host_set, ap->dev = ent->dev; ap->port_no = port_no; ap->hard_port_no = port_no; - if (ent->legacy_mode) - ap->hard_port_no += ent->hard_port_no; ap->pio_mask = ent->pio_mask; ap->mwdma_mask = ent->mwdma_mask; ap->udma_mask = ent->udma_mask; -- cgit v1.2.3 From 2a88d1ac8dca898a7fb602ddd581bf4d2977509d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 10 Aug 2006 16:59:16 +0900 Subject: [PATCH] libata: replace ap->hard_port_no with ap->port_no Replace ap->hard_port_no with ap->port_no. Signed-off-by: Tejun Heo --- drivers/scsi/ata_piix.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 40ecab5793e..501755a606e 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -487,7 +487,7 @@ static void piix_pata_cbl_detect(struct ata_port *ap) goto cbl40; /* check BIOS cable detect results */ - mask = ap->hard_port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC; + mask = ap->port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC; pci_read_config_byte(pdev, PIIX_IOCFG, &tmp); if ((tmp & mask) == 0) goto cbl40; @@ -513,7 +513,7 @@ static int piix_pata_prereset(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->hard_port_no])) { + if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no])) { ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n"); ap->eh_context.i.action &= ~ATA_EH_RESET_MASK; return 0; @@ -550,7 +550,7 @@ static int piix_sata_prereset(struct ata_port *ap) struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); struct piix_host_priv *hpriv = ap->host_set->private_data; const unsigned int *map = hpriv->map; - int base = 2 * ap->hard_port_no; + int base = 2 * ap->port_no; unsigned int present = 0; int port, i; u16 pcs; @@ -601,7 +601,7 @@ static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev) unsigned int pio = adev->pio_mode - XFER_PIO_0; struct pci_dev *dev = to_pci_dev(ap->host_set->dev); unsigned int is_slave = (adev->devno != 0); - unsigned int master_port= ap->hard_port_no ? 0x42 : 0x40; + unsigned int master_port= ap->port_no ? 0x42 : 0x40; unsigned int slave_port = 0x44; u16 master_data; u8 slave_data; @@ -619,10 +619,10 @@ static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev) /* enable PPE, IE and TIME */ master_data |= 0x0070; pci_read_config_byte(dev, slave_port, &slave_data); - slave_data &= (ap->hard_port_no ? 0x0f : 0xf0); + slave_data &= (ap->port_no ? 0x0f : 0xf0); slave_data |= (timings[pio][0] << 2) | - (timings[pio][1] << (ap->hard_port_no ? 4 : 0)); + (timings[pio][1] << (ap->port_no ? 4 : 0)); } else { master_data &= 0xccf8; /* enable PPE, IE and TIME */ @@ -652,9 +652,9 @@ static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev) { unsigned int udma = adev->dma_mode; /* FIXME: MWDMA too */ struct pci_dev *dev = to_pci_dev(ap->host_set->dev); - u8 maslave = ap->hard_port_no ? 0x42 : 0x40; + u8 maslave = ap->port_no ? 0x42 : 0x40; u8 speed = udma; - unsigned int drive_dn = (ap->hard_port_no ? 2 : 0) + adev->devno; + unsigned int drive_dn = (ap->port_no ? 2 : 0) + adev->devno; int a_speed = 3 << (drive_dn * 4); int u_flag = 1 << drive_dn; int v_flag = 0x01 << drive_dn; -- cgit v1.2.3 From 4852ba24f647199be797545226c6d325db231937 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 10 Aug 2006 16:59:18 +0900 Subject: [PATCH] libata: kill unused hard_port_no and legacy_mode Kill unused probe_ent/ap->hard_port_no and probe_ent->legacy_mode. Signed-off-by: Tejun Heo --- drivers/scsi/libata-core.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 2ef86b4e7f6..3f963f206d4 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5223,7 +5223,6 @@ void ata_port_init(struct ata_port *ap, struct ata_host_set *host_set, ap->host_set = host_set; ap->dev = ent->dev; ap->port_no = port_no; - ap->hard_port_no = port_no; ap->pio_mask = ent->pio_mask; ap->mwdma_mask = ent->mwdma_mask; ap->udma_mask = ent->udma_mask; -- cgit v1.2.3 From b7887196e38da54ff893897b80875d632d1a1114 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Thu, 10 Aug 2006 18:13:18 +0900 Subject: [PATCH] libata: replace pci_module_init() with pci_register_driver() Replace pci_module_init() with pci_register_driver(). Signed-off-by: Pavel Roskin Signed-off-by: Tejun Heo --- drivers/scsi/ahci.c | 2 +- drivers/scsi/ata_piix.c | 4 ++-- drivers/scsi/pdc_adma.c | 2 +- drivers/scsi/sata_mv.c | 2 +- drivers/scsi/sata_nv.c | 2 +- drivers/scsi/sata_promise.c | 2 +- drivers/scsi/sata_qstor.c | 2 +- drivers/scsi/sata_sil.c | 2 +- drivers/scsi/sata_sil24.c | 2 +- drivers/scsi/sata_sis.c | 2 +- drivers/scsi/sata_svw.c | 2 +- drivers/scsi/sata_sx4.c | 2 +- drivers/scsi/sata_uli.c | 2 +- drivers/scsi/sata_via.c | 2 +- drivers/scsi/sata_vsc.c | 2 +- 15 files changed, 16 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 68fd7667a08..813031c01fb 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -1665,7 +1665,7 @@ static void ahci_remove_one (struct pci_dev *pdev) static int __init ahci_init(void) { - return pci_module_init(&ahci_pci_driver); + return pci_register_driver(&ahci_pci_driver); } static void __exit ahci_exit(void) diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 501755a606e..46c34fd5af8 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -939,8 +939,8 @@ static int __init piix_init(void) { int rc; - DPRINTK("pci_module_init\n"); - rc = pci_module_init(&piix_pci_driver); + DPRINTK("pci_register_driver\n"); + rc = pci_register_driver(&piix_pci_driver); if (rc) return rc; diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c index d1f38c32aa1..6b7b62408e4 100644 --- a/drivers/scsi/pdc_adma.c +++ b/drivers/scsi/pdc_adma.c @@ -721,7 +721,7 @@ err_out: static int __init adma_ata_init(void) { - return pci_module_init(&adma_ata_pci_driver); + return pci_register_driver(&adma_ata_pci_driver); } static void __exit adma_ata_exit(void) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 1053c7c76b7..a2915a56acc 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -2447,7 +2447,7 @@ err_out: static int __init mv_init(void) { - return pci_module_init(&mv_pci_driver); + return pci_register_driver(&mv_pci_driver); } static void __exit mv_exit(void) diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index 56da25581f3..be46df75ab5 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -583,7 +583,7 @@ static void nv_ck804_host_stop(struct ata_host_set *host_set) static int __init nv_init(void) { - return pci_module_init(&nv_pci_driver); + return pci_register_driver(&nv_pci_driver); } static void __exit nv_exit(void) diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 4776f4e5583..a5b3a7db7a9 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -824,7 +824,7 @@ err_out: static int __init pdc_ata_init(void) { - return pci_module_init(&pdc_ata_pci_driver); + return pci_register_driver(&pdc_ata_pci_driver); } diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index d374c1db0cf..71bd6712b37 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -712,7 +712,7 @@ err_out: static int __init qs_ata_init(void) { - return pci_module_init(&qs_ata_pci_driver); + return pci_register_driver(&qs_ata_pci_driver); } static void __exit qs_ata_exit(void) diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index d0a85073ebf..2393379b239 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -714,7 +714,7 @@ static int sil_pci_device_resume(struct pci_dev *pdev) static int __init sil_init(void) { - return pci_module_init(&sil_pci_driver); + return pci_register_driver(&sil_pci_driver); } static void __exit sil_exit(void) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 3f368c7d3ef..3a0161ddc33 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -1205,7 +1205,7 @@ static int sil24_pci_device_resume(struct pci_dev *pdev) static int __init sil24_init(void) { - return pci_module_init(&sil24_pci_driver); + return pci_register_driver(&sil24_pci_driver); } static void __exit sil24_exit(void) diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c index ee6b5df41d3..ac24f66897f 100644 --- a/drivers/scsi/sata_sis.c +++ b/drivers/scsi/sata_sis.c @@ -334,7 +334,7 @@ err_out: static int __init sis_init(void) { - return pci_module_init(&sis_pci_driver); + return pci_register_driver(&sis_pci_driver); } static void __exit sis_exit(void) diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c index 7d0858095e1..baf259a966d 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/scsi/sata_svw.c @@ -488,7 +488,7 @@ static struct pci_driver k2_sata_pci_driver = { static int __init k2_sata_init(void) { - return pci_module_init(&k2_sata_pci_driver); + return pci_register_driver(&k2_sata_pci_driver); } diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index ccc8cad24f7..0da83cba5c1 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -1482,7 +1482,7 @@ err_out: static int __init pdc_sata_init(void) { - return pci_module_init(&pdc_sata_pci_driver); + return pci_register_driver(&pdc_sata_pci_driver); } diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c index 33cdb4867ef..654aae2b25c 100644 --- a/drivers/scsi/sata_uli.c +++ b/drivers/scsi/sata_uli.c @@ -287,7 +287,7 @@ err_out: static int __init uli_init(void) { - return pci_module_init(&uli_pci_driver); + return pci_register_driver(&uli_pci_driver); } static void __exit uli_exit(void) diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c index 03baec2191b..0bf1dbea640 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/scsi/sata_via.c @@ -381,7 +381,7 @@ err_out: static int __init svia_init(void) { - return pci_module_init(&svia_pci_driver); + return pci_register_driver(&svia_pci_driver); } static void __exit svia_exit(void) diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index ad37871594f..4c69a705a48 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -462,7 +462,7 @@ static struct pci_driver vsc_sata_pci_driver = { static int __init vsc_sata_init(void) { - return pci_module_init(&vsc_sata_pci_driver); + return pci_register_driver(&vsc_sata_pci_driver); } -- cgit v1.2.3 From c6fd280766a050b13360d7c2d59a3d6bd3a27d9a Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 10 Aug 2006 07:31:37 -0400 Subject: Move libata to drivers/ata. --- drivers/Kconfig | 2 + drivers/Makefile | 1 + drivers/ata/Kconfig | 140 + drivers/ata/Makefile | 19 + drivers/ata/ahci.c | 1684 ++++++++++++ drivers/ata/ata_piix.c | 960 +++++++ drivers/ata/libata-bmdma.c | 1109 ++++++++ drivers/ata/libata-core.c | 6097 ++++++++++++++++++++++++++++++++++++++++++ drivers/ata/libata-eh.c | 2246 ++++++++++++++++ drivers/ata/libata-scsi.c | 3322 +++++++++++++++++++++++ drivers/ata/libata.h | 122 + drivers/ata/pdc_adma.c | 740 ++++++ drivers/ata/sata_mv.c | 2468 +++++++++++++++++ drivers/ata/sata_nv.c | 595 +++++ drivers/ata/sata_promise.c | 844 ++++++ drivers/ata/sata_promise.h | 157 ++ drivers/ata/sata_qstor.c | 730 ++++++ drivers/ata/sata_sil.c | 723 +++++ drivers/ata/sata_sil24.c | 1222 +++++++++ drivers/ata/sata_sis.c | 347 +++ drivers/ata/sata_svw.c | 508 ++++ drivers/ata/sata_sx4.c | 1502 +++++++++++ drivers/ata/sata_uli.c | 300 +++ drivers/ata/sata_via.c | 394 +++ drivers/ata/sata_vsc.c | 482 ++++ drivers/scsi/Kconfig | 138 - drivers/scsi/Makefile | 16 - drivers/scsi/ahci.c | 1684 ------------ drivers/scsi/ata_piix.c | 960 ------- drivers/scsi/libata-bmdma.c | 1109 -------- drivers/scsi/libata-core.c | 6098 ------------------------------------------- drivers/scsi/libata-eh.c | 2246 ---------------- drivers/scsi/libata-scsi.c | 3322 ----------------------- drivers/scsi/libata.h | 122 - drivers/scsi/pdc_adma.c | 740 ------ drivers/scsi/sata_mv.c | 2468 ----------------- drivers/scsi/sata_nv.c | 595 ----- drivers/scsi/sata_promise.c | 844 ------ drivers/scsi/sata_promise.h | 157 -- drivers/scsi/sata_qstor.c | 730 ------ drivers/scsi/sata_sil.c | 723 ----- drivers/scsi/sata_sil24.c | 1222 --------- drivers/scsi/sata_sis.c | 347 --- drivers/scsi/sata_svw.c | 508 ---- drivers/scsi/sata_sx4.c | 1502 ----------- drivers/scsi/sata_uli.c | 300 --- drivers/scsi/sata_via.c | 394 --- drivers/scsi/sata_vsc.c | 482 ---- 48 files changed, 26714 insertions(+), 26707 deletions(-) create mode 100644 drivers/ata/Kconfig create mode 100644 drivers/ata/Makefile create mode 100644 drivers/ata/ahci.c create mode 100644 drivers/ata/ata_piix.c create mode 100644 drivers/ata/libata-bmdma.c create mode 100644 drivers/ata/libata-core.c create mode 100644 drivers/ata/libata-eh.c create mode 100644 drivers/ata/libata-scsi.c create mode 100644 drivers/ata/libata.h create mode 100644 drivers/ata/pdc_adma.c create mode 100644 drivers/ata/sata_mv.c create mode 100644 drivers/ata/sata_nv.c create mode 100644 drivers/ata/sata_promise.c create mode 100644 drivers/ata/sata_promise.h create mode 100644 drivers/ata/sata_qstor.c create mode 100644 drivers/ata/sata_sil.c create mode 100644 drivers/ata/sata_sil24.c create mode 100644 drivers/ata/sata_sis.c create mode 100644 drivers/ata/sata_svw.c create mode 100644 drivers/ata/sata_sx4.c create mode 100644 drivers/ata/sata_uli.c create mode 100644 drivers/ata/sata_via.c create mode 100644 drivers/ata/sata_vsc.c delete mode 100644 drivers/scsi/ahci.c delete mode 100644 drivers/scsi/ata_piix.c delete mode 100644 drivers/scsi/libata-bmdma.c delete mode 100644 drivers/scsi/libata-core.c delete mode 100644 drivers/scsi/libata-eh.c delete mode 100644 drivers/scsi/libata-scsi.c delete mode 100644 drivers/scsi/libata.h delete mode 100644 drivers/scsi/pdc_adma.c delete mode 100644 drivers/scsi/sata_mv.c delete mode 100644 drivers/scsi/sata_nv.c delete mode 100644 drivers/scsi/sata_promise.c delete mode 100644 drivers/scsi/sata_promise.h delete mode 100644 drivers/scsi/sata_qstor.c delete mode 100644 drivers/scsi/sata_sil.c delete mode 100644 drivers/scsi/sata_sil24.c delete mode 100644 drivers/scsi/sata_sis.c delete mode 100644 drivers/scsi/sata_svw.c delete mode 100644 drivers/scsi/sata_sx4.c delete mode 100644 drivers/scsi/sata_uli.c delete mode 100644 drivers/scsi/sata_via.c delete mode 100644 drivers/scsi/sata_vsc.c (limited to 'drivers') diff --git a/drivers/Kconfig b/drivers/Kconfig index 8b11cebe65d..263e86ddc1a 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -18,6 +18,8 @@ source "drivers/ide/Kconfig" source "drivers/scsi/Kconfig" +source "drivers/ata/Kconfig" + source "drivers/cdrom/Kconfig" source "drivers/md/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index fc2d744a4e4..4ac14dab307 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_PPC_PMAC) += macintosh/ obj-$(CONFIG_IDE) += ide/ obj-$(CONFIG_FC4) += fc4/ obj-$(CONFIG_SCSI) += scsi/ +obj-$(CONFIG_ATA) += ata/ obj-$(CONFIG_FUSION) += message/ obj-$(CONFIG_IEEE1394) += ieee1394/ obj-y += cdrom/ diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig new file mode 100644 index 00000000000..95d6b417af6 --- /dev/null +++ b/drivers/ata/Kconfig @@ -0,0 +1,140 @@ + +config ATA + tristate "ATA device support" + depends on SCSI + ---help--- + If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or + any other ATA device under Linux, say Y and make sure that you know + the name of your ATA host adapter (the card inside your computer + that "speaks" the ATA protocol, also called ATA controller), + because you will be asked for it. + +config SCSI_SATA_AHCI + tristate "AHCI SATA support" + depends on ATA && PCI + help + This option enables support for AHCI Serial ATA. + + If unsure, say N. + +config SCSI_SATA_SVW + tristate "ServerWorks Frodo / Apple K2 SATA support" + depends on ATA && PCI + help + This option enables support for Broadcom/Serverworks/Apple K2 + SATA support. + + If unsure, say N. + +config SCSI_ATA_PIIX + tristate "Intel PIIX/ICH SATA support" + depends on ATA && PCI + help + This option enables support for ICH5/6/7/8 Serial ATA. + If PATA support was enabled previously, this enables + support for select Intel PIIX/ICH PATA host controllers. + + If unsure, say N. + +config SCSI_SATA_MV + tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" + depends on ATA && PCI && EXPERIMENTAL + help + This option enables support for the Marvell Serial ATA family. + Currently supports 88SX[56]0[48][01] chips. + + If unsure, say N. + +config SCSI_SATA_NV + tristate "NVIDIA SATA support" + depends on ATA && PCI + help + This option enables support for NVIDIA Serial ATA. + + If unsure, say N. + +config SCSI_PDC_ADMA + tristate "Pacific Digital ADMA support" + depends on ATA && PCI + help + This option enables support for Pacific Digital ADMA controllers + + If unsure, say N. + +config SCSI_SATA_QSTOR + tristate "Pacific Digital SATA QStor support" + depends on ATA && PCI + help + This option enables support for Pacific Digital Serial ATA QStor. + + If unsure, say N. + +config SCSI_SATA_PROMISE + tristate "Promise SATA TX2/TX4 support" + depends on ATA && PCI + help + This option enables support for Promise Serial ATA TX2/TX4. + + If unsure, say N. + +config SCSI_SATA_SX4 + tristate "Promise SATA SX4 support" + depends on ATA && PCI && EXPERIMENTAL + help + This option enables support for Promise Serial ATA SX4. + + If unsure, say N. + +config SCSI_SATA_SIL + tristate "Silicon Image SATA support" + depends on ATA && PCI + help + This option enables support for Silicon Image Serial ATA. + + If unsure, say N. + +config SCSI_SATA_SIL24 + tristate "Silicon Image 3124/3132 SATA support" + depends on ATA && PCI + help + This option enables support for Silicon Image 3124/3132 Serial ATA. + + If unsure, say N. + +config SCSI_SATA_SIS + tristate "SiS 964/180 SATA support" + depends on ATA && PCI + help + This option enables support for SiS Serial ATA 964/180. + + If unsure, say N. + +config SCSI_SATA_ULI + tristate "ULi Electronics SATA support" + depends on ATA && PCI + help + This option enables support for ULi Electronics SATA. + + If unsure, say N. + +config SCSI_SATA_VIA + tristate "VIA SATA support" + depends on ATA && PCI + help + This option enables support for VIA Serial ATA. + + If unsure, say N. + +config SCSI_SATA_VITESSE + tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" + depends on ATA && PCI + help + This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. + + If unsure, say N. + +config SCSI_SATA_INTEL_COMBINED + bool + depends on IDE=y && !BLK_DEV_IDE_SATA && (SCSI_SATA_AHCI || SCSI_ATA_PIIX) + default y + diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile new file mode 100644 index 00000000000..60bdb7b2b5c --- /dev/null +++ b/drivers/ata/Makefile @@ -0,0 +1,19 @@ + +obj-$(CONFIG_SCSI_SATA_AHCI) += libata.o ahci.o +obj-$(CONFIG_SCSI_SATA_SVW) += libata.o sata_svw.o +obj-$(CONFIG_SCSI_ATA_PIIX) += libata.o ata_piix.o +obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o +obj-$(CONFIG_SCSI_SATA_QSTOR) += libata.o sata_qstor.o +obj-$(CONFIG_SCSI_SATA_SIL) += libata.o sata_sil.o +obj-$(CONFIG_SCSI_SATA_SIL24) += libata.o sata_sil24.o +obj-$(CONFIG_SCSI_SATA_VIA) += libata.o sata_via.o +obj-$(CONFIG_SCSI_SATA_VITESSE) += libata.o sata_vsc.o +obj-$(CONFIG_SCSI_SATA_SIS) += libata.o sata_sis.o +obj-$(CONFIG_SCSI_SATA_SX4) += libata.o sata_sx4.o +obj-$(CONFIG_SCSI_SATA_NV) += libata.o sata_nv.o +obj-$(CONFIG_SCSI_SATA_ULI) += libata.o sata_uli.o +obj-$(CONFIG_SCSI_SATA_MV) += libata.o sata_mv.o +obj-$(CONFIG_SCSI_PDC_ADMA) += libata.o pdc_adma.o + +libata-objs := libata-core.o libata-scsi.o libata-bmdma.o libata-eh.o + diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c new file mode 100644 index 00000000000..813031c01fb --- /dev/null +++ b/drivers/ata/ahci.c @@ -0,0 +1,1684 @@ +/* + * ahci.c - AHCI SATA support + * + * Maintained by: Jeff Garzik + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2004-2005 Red Hat, Inc. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * AHCI hardware documentation: + * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf + * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "ahci" +#define DRV_VERSION "2.0" + + +enum { + AHCI_PCI_BAR = 5, + AHCI_MAX_SG = 168, /* hardware max is 64K */ + AHCI_DMA_BOUNDARY = 0xffffffff, + AHCI_USE_CLUSTERING = 0, + AHCI_MAX_CMDS = 32, + AHCI_CMD_SZ = 32, + AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ, + AHCI_RX_FIS_SZ = 256, + AHCI_CMD_TBL_CDB = 0x40, + AHCI_CMD_TBL_HDR_SZ = 0x80, + AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16), + AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS, + AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + + AHCI_RX_FIS_SZ, + AHCI_IRQ_ON_SG = (1 << 31), + AHCI_CMD_ATAPI = (1 << 5), + AHCI_CMD_WRITE = (1 << 6), + AHCI_CMD_PREFETCH = (1 << 7), + AHCI_CMD_RESET = (1 << 8), + AHCI_CMD_CLR_BUSY = (1 << 10), + + RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */ + RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */ + + board_ahci = 0, + board_ahci_vt8251 = 1, + + /* global controller registers */ + HOST_CAP = 0x00, /* host capabilities */ + HOST_CTL = 0x04, /* global host control */ + HOST_IRQ_STAT = 0x08, /* interrupt status */ + HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */ + HOST_VERSION = 0x10, /* AHCI spec. version compliancy */ + + /* HOST_CTL bits */ + HOST_RESET = (1 << 0), /* reset controller; self-clear */ + HOST_IRQ_EN = (1 << 1), /* global IRQ enable */ + HOST_AHCI_EN = (1 << 31), /* AHCI enabled */ + + /* HOST_CAP bits */ + HOST_CAP_SSC = (1 << 14), /* Slumber capable */ + HOST_CAP_CLO = (1 << 24), /* Command List Override support */ + HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */ + HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */ + HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */ + + /* registers for each SATA port */ + PORT_LST_ADDR = 0x00, /* command list DMA addr */ + PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */ + PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */ + PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */ + PORT_IRQ_STAT = 0x10, /* interrupt status */ + PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */ + PORT_CMD = 0x18, /* port command */ + PORT_TFDATA = 0x20, /* taskfile data */ + PORT_SIG = 0x24, /* device TF signature */ + PORT_CMD_ISSUE = 0x38, /* command issue */ + PORT_SCR = 0x28, /* SATA phy register block */ + PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */ + PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */ + PORT_SCR_ERR = 0x30, /* SATA phy register: SError */ + PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */ + + /* PORT_IRQ_{STAT,MASK} bits */ + PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */ + PORT_IRQ_TF_ERR = (1 << 30), /* task file error */ + PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */ + PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */ + PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */ + PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */ + PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */ + PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */ + + PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */ + PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */ + PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */ + PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */ + PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */ + PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */ + PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */ + PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */ + PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */ + + PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR | + PORT_IRQ_IF_ERR | + PORT_IRQ_CONNECT | + PORT_IRQ_PHYRDY | + PORT_IRQ_UNK_FIS, + PORT_IRQ_ERROR = PORT_IRQ_FREEZE | + PORT_IRQ_TF_ERR | + PORT_IRQ_HBUS_DATA_ERR, + DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | + PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | + PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS, + + /* PORT_CMD bits */ + PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */ + PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */ + PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */ + PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */ + PORT_CMD_CLO = (1 << 3), /* Command list override */ + PORT_CMD_POWER_ON = (1 << 2), /* Power up device */ + PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */ + PORT_CMD_START = (1 << 0), /* Enable port DMA engine */ + + PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */ + PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */ + PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */ + PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */ + + /* hpriv->flags bits */ + AHCI_FLAG_MSI = (1 << 0), + + /* ap->flags bits */ + AHCI_FLAG_RESET_NEEDS_CLO = (1 << 24), + AHCI_FLAG_NO_NCQ = (1 << 25), +}; + +struct ahci_cmd_hdr { + u32 opts; + u32 status; + u32 tbl_addr; + u32 tbl_addr_hi; + u32 reserved[4]; +}; + +struct ahci_sg { + u32 addr; + u32 addr_hi; + u32 reserved; + u32 flags_size; +}; + +struct ahci_host_priv { + unsigned long flags; + u32 cap; /* cache of HOST_CAP register */ + u32 port_map; /* cache of HOST_PORTS_IMPL reg */ +}; + +struct ahci_port_priv { + struct ahci_cmd_hdr *cmd_slot; + dma_addr_t cmd_slot_dma; + void *cmd_tbl; + dma_addr_t cmd_tbl_dma; + void *rx_fis; + dma_addr_t rx_fis_dma; +}; + +static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg); +static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); +static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); +static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc); +static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *regs); +static void ahci_irq_clear(struct ata_port *ap); +static int ahci_port_start(struct ata_port *ap); +static void ahci_port_stop(struct ata_port *ap); +static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf); +static void ahci_qc_prep(struct ata_queued_cmd *qc); +static u8 ahci_check_status(struct ata_port *ap); +static void ahci_freeze(struct ata_port *ap); +static void ahci_thaw(struct ata_port *ap); +static void ahci_error_handler(struct ata_port *ap); +static void ahci_post_internal_cmd(struct ata_queued_cmd *qc); +static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg); +static int ahci_port_resume(struct ata_port *ap); +static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); +static int ahci_pci_device_resume(struct pci_dev *pdev); +static void ahci_remove_one (struct pci_dev *pdev); + +static struct scsi_host_template ahci_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .change_queue_depth = ata_scsi_change_queue_depth, + .can_queue = AHCI_MAX_CMDS - 1, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = AHCI_MAX_SG, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = AHCI_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = AHCI_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, + .suspend = ata_scsi_device_suspend, + .resume = ata_scsi_device_resume, +}; + +static const struct ata_port_operations ahci_ops = { + .port_disable = ata_port_disable, + + .check_status = ahci_check_status, + .check_altstatus = ahci_check_status, + .dev_select = ata_noop_dev_select, + + .tf_read = ahci_tf_read, + + .qc_prep = ahci_qc_prep, + .qc_issue = ahci_qc_issue, + + .irq_handler = ahci_interrupt, + .irq_clear = ahci_irq_clear, + + .scr_read = ahci_scr_read, + .scr_write = ahci_scr_write, + + .freeze = ahci_freeze, + .thaw = ahci_thaw, + + .error_handler = ahci_error_handler, + .post_internal_cmd = ahci_post_internal_cmd, + + .port_suspend = ahci_port_suspend, + .port_resume = ahci_port_resume, + + .port_start = ahci_port_start, + .port_stop = ahci_port_stop, +}; + +static const struct ata_port_info ahci_port_info[] = { + /* board_ahci */ + { + .sht = &ahci_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | + ATA_FLAG_SKIP_D2H_BSY, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 ; FIXME */ + .port_ops = &ahci_ops, + }, + /* board_ahci_vt8251 */ + { + .sht = &ahci_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | + ATA_FLAG_SKIP_D2H_BSY | + AHCI_FLAG_RESET_NEEDS_CLO | AHCI_FLAG_NO_NCQ, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 ; FIXME */ + .port_ops = &ahci_ops, + }, +}; + +static const struct pci_device_id ahci_pci_tbl[] = { + /* Intel */ + { PCI_VENDOR_ID_INTEL, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* ICH6 */ + { PCI_VENDOR_ID_INTEL, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* ICH6M */ + { PCI_VENDOR_ID_INTEL, 0x27c1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* ICH7 */ + { PCI_VENDOR_ID_INTEL, 0x27c5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* ICH7M */ + { PCI_VENDOR_ID_INTEL, 0x27c3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* ICH7R */ + { PCI_VENDOR_ID_AL, 0x5288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* ULi M5288 */ + { PCI_VENDOR_ID_INTEL, 0x2681, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* ESB2 */ + { PCI_VENDOR_ID_INTEL, 0x2682, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* ESB2 */ + { PCI_VENDOR_ID_INTEL, 0x2683, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* ESB2 */ + { PCI_VENDOR_ID_INTEL, 0x27c6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* ICH7-M DH */ + { PCI_VENDOR_ID_INTEL, 0x2821, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* ICH8 */ + { PCI_VENDOR_ID_INTEL, 0x2822, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* ICH8 */ + { PCI_VENDOR_ID_INTEL, 0x2824, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* ICH8 */ + { PCI_VENDOR_ID_INTEL, 0x2829, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* ICH8M */ + { PCI_VENDOR_ID_INTEL, 0x282a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* ICH8M */ + + /* JMicron */ + { 0x197b, 0x2360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* JMicron JMB360 */ + { 0x197b, 0x2361, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* JMicron JMB361 */ + { 0x197b, 0x2363, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* JMicron JMB363 */ + { 0x197b, 0x2365, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* JMicron JMB365 */ + { 0x197b, 0x2366, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* JMicron JMB366 */ + + /* ATI */ + { PCI_VENDOR_ID_ATI, 0x4380, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* ATI SB600 non-raid */ + { PCI_VENDOR_ID_ATI, 0x4381, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* ATI SB600 raid */ + + /* VIA */ + { PCI_VENDOR_ID_VIA, 0x3349, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci_vt8251 }, /* VIA VT8251 */ + + /* NVIDIA */ + { PCI_VENDOR_ID_NVIDIA, 0x044c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* MCP65 */ + { PCI_VENDOR_ID_NVIDIA, 0x044d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* MCP65 */ + { PCI_VENDOR_ID_NVIDIA, 0x044e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* MCP65 */ + { PCI_VENDOR_ID_NVIDIA, 0x044f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* MCP65 */ + + /* SiS */ + { PCI_VENDOR_ID_SI, 0x1184, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* SiS 966 */ + { PCI_VENDOR_ID_SI, 0x1185, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* SiS 966 */ + { PCI_VENDOR_ID_SI, 0x0186, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* SiS 968 */ + + { } /* terminate list */ +}; + + +static struct pci_driver ahci_pci_driver = { + .name = DRV_NAME, + .id_table = ahci_pci_tbl, + .probe = ahci_init_one, + .suspend = ahci_pci_device_suspend, + .resume = ahci_pci_device_resume, + .remove = ahci_remove_one, +}; + + +static inline unsigned long ahci_port_base_ul (unsigned long base, unsigned int port) +{ + return base + 0x100 + (port * 0x80); +} + +static inline void __iomem *ahci_port_base (void __iomem *base, unsigned int port) +{ + return (void __iomem *) ahci_port_base_ul((unsigned long)base, port); +} + +static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg_in) +{ + unsigned int sc_reg; + + switch (sc_reg_in) { + case SCR_STATUS: sc_reg = 0; break; + case SCR_CONTROL: sc_reg = 1; break; + case SCR_ERROR: sc_reg = 2; break; + case SCR_ACTIVE: sc_reg = 3; break; + default: + return 0xffffffffU; + } + + return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); +} + + +static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg_in, + u32 val) +{ + unsigned int sc_reg; + + switch (sc_reg_in) { + case SCR_STATUS: sc_reg = 0; break; + case SCR_CONTROL: sc_reg = 1; break; + case SCR_ERROR: sc_reg = 2; break; + case SCR_ACTIVE: sc_reg = 3; break; + default: + return; + } + + writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); +} + +static void ahci_start_engine(void __iomem *port_mmio) +{ + u32 tmp; + + /* start DMA */ + tmp = readl(port_mmio + PORT_CMD); + tmp |= PORT_CMD_START; + writel(tmp, port_mmio + PORT_CMD); + readl(port_mmio + PORT_CMD); /* flush */ +} + +static int ahci_stop_engine(void __iomem *port_mmio) +{ + u32 tmp; + + tmp = readl(port_mmio + PORT_CMD); + + /* check if the HBA is idle */ + if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0) + return 0; + + /* setting HBA to idle */ + tmp &= ~PORT_CMD_START; + writel(tmp, port_mmio + PORT_CMD); + + /* wait for engine to stop. This could be as long as 500 msec */ + tmp = ata_wait_register(port_mmio + PORT_CMD, + PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500); + if (tmp & PORT_CMD_LIST_ON) + return -EIO; + + return 0; +} + +static void ahci_start_fis_rx(void __iomem *port_mmio, u32 cap, + dma_addr_t cmd_slot_dma, dma_addr_t rx_fis_dma) +{ + u32 tmp; + + /* set FIS registers */ + if (cap & HOST_CAP_64) + writel((cmd_slot_dma >> 16) >> 16, port_mmio + PORT_LST_ADDR_HI); + writel(cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR); + + if (cap & HOST_CAP_64) + writel((rx_fis_dma >> 16) >> 16, port_mmio + PORT_FIS_ADDR_HI); + writel(rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR); + + /* enable FIS reception */ + tmp = readl(port_mmio + PORT_CMD); + tmp |= PORT_CMD_FIS_RX; + writel(tmp, port_mmio + PORT_CMD); + + /* flush */ + readl(port_mmio + PORT_CMD); +} + +static int ahci_stop_fis_rx(void __iomem *port_mmio) +{ + u32 tmp; + + /* disable FIS reception */ + tmp = readl(port_mmio + PORT_CMD); + tmp &= ~PORT_CMD_FIS_RX; + writel(tmp, port_mmio + PORT_CMD); + + /* wait for completion, spec says 500ms, give it 1000 */ + tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON, + PORT_CMD_FIS_ON, 10, 1000); + if (tmp & PORT_CMD_FIS_ON) + return -EBUSY; + + return 0; +} + +static void ahci_power_up(void __iomem *port_mmio, u32 cap) +{ + u32 cmd; + + cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK; + + /* spin up device */ + if (cap & HOST_CAP_SSS) { + cmd |= PORT_CMD_SPIN_UP; + writel(cmd, port_mmio + PORT_CMD); + } + + /* wake up link */ + writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD); +} + +static void ahci_power_down(void __iomem *port_mmio, u32 cap) +{ + u32 cmd, scontrol; + + cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK; + + if (cap & HOST_CAP_SSC) { + /* enable transitions to slumber mode */ + scontrol = readl(port_mmio + PORT_SCR_CTL); + if ((scontrol & 0x0f00) > 0x100) { + scontrol &= ~0xf00; + writel(scontrol, port_mmio + PORT_SCR_CTL); + } + + /* put device into slumber mode */ + writel(cmd | PORT_CMD_ICC_SLUMBER, port_mmio + PORT_CMD); + + /* wait for the transition to complete */ + ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_ICC_SLUMBER, + PORT_CMD_ICC_SLUMBER, 1, 50); + } + + /* put device into listen mode */ + if (cap & HOST_CAP_SSS) { + /* first set PxSCTL.DET to 0 */ + scontrol = readl(port_mmio + PORT_SCR_CTL); + scontrol &= ~0xf; + writel(scontrol, port_mmio + PORT_SCR_CTL); + + /* then set PxCMD.SUD to 0 */ + cmd &= ~PORT_CMD_SPIN_UP; + writel(cmd, port_mmio + PORT_CMD); + } +} + +static void ahci_init_port(void __iomem *port_mmio, u32 cap, + dma_addr_t cmd_slot_dma, dma_addr_t rx_fis_dma) +{ + /* power up */ + ahci_power_up(port_mmio, cap); + + /* enable FIS reception */ + ahci_start_fis_rx(port_mmio, cap, cmd_slot_dma, rx_fis_dma); + + /* enable DMA */ + ahci_start_engine(port_mmio); +} + +static int ahci_deinit_port(void __iomem *port_mmio, u32 cap, const char **emsg) +{ + int rc; + + /* disable DMA */ + rc = ahci_stop_engine(port_mmio); + if (rc) { + *emsg = "failed to stop engine"; + return rc; + } + + /* disable FIS reception */ + rc = ahci_stop_fis_rx(port_mmio); + if (rc) { + *emsg = "failed stop FIS RX"; + return rc; + } + + /* put device into slumber mode */ + ahci_power_down(port_mmio, cap); + + return 0; +} + +static int ahci_reset_controller(void __iomem *mmio, struct pci_dev *pdev) +{ + u32 cap_save, tmp; + + cap_save = readl(mmio + HOST_CAP); + cap_save &= ( (1<<28) | (1<<17) ); + cap_save |= (1 << 27); + + /* global controller reset */ + tmp = readl(mmio + HOST_CTL); + if ((tmp & HOST_RESET) == 0) { + writel(tmp | HOST_RESET, mmio + HOST_CTL); + readl(mmio + HOST_CTL); /* flush */ + } + + /* reset must complete within 1 second, or + * the hardware should be considered fried. + */ + ssleep(1); + + tmp = readl(mmio + HOST_CTL); + if (tmp & HOST_RESET) { + dev_printk(KERN_ERR, &pdev->dev, + "controller reset failed (0x%x)\n", tmp); + return -EIO; + } + + writel(HOST_AHCI_EN, mmio + HOST_CTL); + (void) readl(mmio + HOST_CTL); /* flush */ + writel(cap_save, mmio + HOST_CAP); + writel(0xf, mmio + HOST_PORTS_IMPL); + (void) readl(mmio + HOST_PORTS_IMPL); /* flush */ + + if (pdev->vendor == PCI_VENDOR_ID_INTEL) { + u16 tmp16; + + /* configure PCS */ + pci_read_config_word(pdev, 0x92, &tmp16); + tmp16 |= 0xf; + pci_write_config_word(pdev, 0x92, tmp16); + } + + return 0; +} + +static void ahci_init_controller(void __iomem *mmio, struct pci_dev *pdev, + int n_ports, u32 cap) +{ + int i, rc; + u32 tmp; + + for (i = 0; i < n_ports; i++) { + void __iomem *port_mmio = ahci_port_base(mmio, i); + const char *emsg = NULL; + +#if 0 /* BIOSen initialize this incorrectly */ + if (!(hpriv->port_map & (1 << i))) + continue; +#endif + + /* make sure port is not active */ + rc = ahci_deinit_port(port_mmio, cap, &emsg); + if (rc) + dev_printk(KERN_WARNING, &pdev->dev, + "%s (%d)\n", emsg, rc); + + /* clear SError */ + tmp = readl(port_mmio + PORT_SCR_ERR); + VPRINTK("PORT_SCR_ERR 0x%x\n", tmp); + writel(tmp, port_mmio + PORT_SCR_ERR); + + /* clear port IRQ */ + tmp = readl(port_mmio + PORT_IRQ_STAT); + VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp); + if (tmp) + writel(tmp, port_mmio + PORT_IRQ_STAT); + + writel(1 << i, mmio + HOST_IRQ_STAT); + } + + tmp = readl(mmio + HOST_CTL); + VPRINTK("HOST_CTL 0x%x\n", tmp); + writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL); + tmp = readl(mmio + HOST_CTL); + VPRINTK("HOST_CTL 0x%x\n", tmp); +} + +static unsigned int ahci_dev_classify(struct ata_port *ap) +{ + void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; + struct ata_taskfile tf; + u32 tmp; + + tmp = readl(port_mmio + PORT_SIG); + tf.lbah = (tmp >> 24) & 0xff; + tf.lbam = (tmp >> 16) & 0xff; + tf.lbal = (tmp >> 8) & 0xff; + tf.nsect = (tmp) & 0xff; + + return ata_dev_classify(&tf); +} + +static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, + u32 opts) +{ + dma_addr_t cmd_tbl_dma; + + cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ; + + pp->cmd_slot[tag].opts = cpu_to_le32(opts); + pp->cmd_slot[tag].status = 0; + pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff); + pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16); +} + +static int ahci_clo(struct ata_port *ap) +{ + void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; + struct ahci_host_priv *hpriv = ap->host_set->private_data; + u32 tmp; + + if (!(hpriv->cap & HOST_CAP_CLO)) + return -EOPNOTSUPP; + + tmp = readl(port_mmio + PORT_CMD); + tmp |= PORT_CMD_CLO; + writel(tmp, port_mmio + PORT_CMD); + + tmp = ata_wait_register(port_mmio + PORT_CMD, + PORT_CMD_CLO, PORT_CMD_CLO, 1, 500); + if (tmp & PORT_CMD_CLO) + return -EIO; + + return 0; +} + +static int ahci_prereset(struct ata_port *ap) +{ + if ((ap->flags & AHCI_FLAG_RESET_NEEDS_CLO) && + (ata_busy_wait(ap, ATA_BUSY, 1000) & ATA_BUSY)) { + /* ATA_BUSY hasn't cleared, so send a CLO */ + ahci_clo(ap); + } + + return ata_std_prereset(ap); +} + +static int ahci_softreset(struct ata_port *ap, unsigned int *class) +{ + struct ahci_port_priv *pp = ap->private_data; + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + const u32 cmd_fis_len = 5; /* five dwords */ + const char *reason = NULL; + struct ata_taskfile tf; + u32 tmp; + u8 *fis; + int rc; + + DPRINTK("ENTER\n"); + + if (ata_port_offline(ap)) { + DPRINTK("PHY reports no device\n"); + *class = ATA_DEV_NONE; + return 0; + } + + /* prepare for SRST (AHCI-1.1 10.4.1) */ + rc = ahci_stop_engine(port_mmio); + if (rc) { + reason = "failed to stop engine"; + goto fail_restart; + } + + /* check BUSY/DRQ, perform Command List Override if necessary */ + ahci_tf_read(ap, &tf); + if (tf.command & (ATA_BUSY | ATA_DRQ)) { + rc = ahci_clo(ap); + + if (rc == -EOPNOTSUPP) { + reason = "port busy but CLO unavailable"; + goto fail_restart; + } else if (rc) { + reason = "port busy but CLO failed"; + goto fail_restart; + } + } + + /* restart engine */ + ahci_start_engine(port_mmio); + + ata_tf_init(ap->device, &tf); + fis = pp->cmd_tbl; + + /* issue the first D2H Register FIS */ + ahci_fill_cmd_slot(pp, 0, + cmd_fis_len | AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY); + + tf.ctl |= ATA_SRST; + ata_tf_to_fis(&tf, fis, 0); + fis[1] &= ~(1 << 7); /* turn off Command FIS bit */ + + writel(1, port_mmio + PORT_CMD_ISSUE); + + tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1, 1, 500); + if (tmp & 0x1) { + rc = -EIO; + reason = "1st FIS failed"; + goto fail; + } + + /* spec says at least 5us, but be generous and sleep for 1ms */ + msleep(1); + + /* issue the second D2H Register FIS */ + ahci_fill_cmd_slot(pp, 0, cmd_fis_len); + + tf.ctl &= ~ATA_SRST; + ata_tf_to_fis(&tf, fis, 0); + fis[1] &= ~(1 << 7); /* turn off Command FIS bit */ + + writel(1, port_mmio + PORT_CMD_ISSUE); + readl(port_mmio + PORT_CMD_ISSUE); /* flush */ + + /* spec mandates ">= 2ms" before checking status. + * We wait 150ms, because that was the magic delay used for + * ATAPI devices in Hale Landis's ATADRVR, for the period of time + * between when the ATA command register is written, and then + * status is checked. Because waiting for "a while" before + * checking status is fine, post SRST, we perform this magic + * delay here as well. + */ + msleep(150); + + *class = ATA_DEV_NONE; + if (ata_port_online(ap)) { + if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { + rc = -EIO; + reason = "device not ready"; + goto fail; + } + *class = ahci_dev_classify(ap); + } + + DPRINTK("EXIT, class=%u\n", *class); + return 0; + + fail_restart: + ahci_start_engine(port_mmio); + fail: + ata_port_printk(ap, KERN_ERR, "softreset failed (%s)\n", reason); + return rc; +} + +static int ahci_hardreset(struct ata_port *ap, unsigned int *class) +{ + struct ahci_port_priv *pp = ap->private_data; + u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; + struct ata_taskfile tf; + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + int rc; + + DPRINTK("ENTER\n"); + + ahci_stop_engine(port_mmio); + + /* clear D2H reception area to properly wait for D2H FIS */ + ata_tf_init(ap->device, &tf); + tf.command = 0xff; + ata_tf_to_fis(&tf, d2h_fis, 0); + + rc = sata_std_hardreset(ap, class); + + ahci_start_engine(port_mmio); + + if (rc == 0 && ata_port_online(ap)) + *class = ahci_dev_classify(ap); + if (*class == ATA_DEV_UNKNOWN) + *class = ATA_DEV_NONE; + + DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); + return rc; +} + +static void ahci_postreset(struct ata_port *ap, unsigned int *class) +{ + void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; + u32 new_tmp, tmp; + + ata_std_postreset(ap, class); + + /* Make sure port's ATAPI bit is set appropriately */ + new_tmp = tmp = readl(port_mmio + PORT_CMD); + if (*class == ATA_DEV_ATAPI) + new_tmp |= PORT_CMD_ATAPI; + else + new_tmp &= ~PORT_CMD_ATAPI; + if (new_tmp != tmp) { + writel(new_tmp, port_mmio + PORT_CMD); + readl(port_mmio + PORT_CMD); /* flush */ + } +} + +static u8 ahci_check_status(struct ata_port *ap) +{ + void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr; + + return readl(mmio + PORT_TFDATA) & 0xFF; +} + +static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct ahci_port_priv *pp = ap->private_data; + u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; + + ata_tf_from_fis(d2h_fis, tf); +} + +static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl) +{ + struct scatterlist *sg; + struct ahci_sg *ahci_sg; + unsigned int n_sg = 0; + + VPRINTK("ENTER\n"); + + /* + * Next, the S/G list. + */ + ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ; + ata_for_each_sg(sg, qc) { + dma_addr_t addr = sg_dma_address(sg); + u32 sg_len = sg_dma_len(sg); + + ahci_sg->addr = cpu_to_le32(addr & 0xffffffff); + ahci_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16); + ahci_sg->flags_size = cpu_to_le32(sg_len - 1); + + ahci_sg++; + n_sg++; + } + + return n_sg; +} + +static void ahci_qc_prep(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ahci_port_priv *pp = ap->private_data; + int is_atapi = is_atapi_taskfile(&qc->tf); + void *cmd_tbl; + u32 opts; + const u32 cmd_fis_len = 5; /* five dwords */ + unsigned int n_elem; + + /* + * Fill in command table information. First, the header, + * a SATA Register - Host to Device command FIS. + */ + cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ; + + ata_tf_to_fis(&qc->tf, cmd_tbl, 0); + if (is_atapi) { + memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32); + memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len); + } + + n_elem = 0; + if (qc->flags & ATA_QCFLAG_DMAMAP) + n_elem = ahci_fill_sg(qc, cmd_tbl); + + /* + * Fill in command slot information. + */ + opts = cmd_fis_len | n_elem << 16; + if (qc->tf.flags & ATA_TFLAG_WRITE) + opts |= AHCI_CMD_WRITE; + if (is_atapi) + opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH; + + ahci_fill_cmd_slot(pp, qc->tag, opts); +} + +static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) +{ + struct ahci_port_priv *pp = ap->private_data; + struct ata_eh_info *ehi = &ap->eh_info; + unsigned int err_mask = 0, action = 0; + struct ata_queued_cmd *qc; + u32 serror; + + ata_ehi_clear_desc(ehi); + + /* AHCI needs SError cleared; otherwise, it might lock up */ + serror = ahci_scr_read(ap, SCR_ERROR); + ahci_scr_write(ap, SCR_ERROR, serror); + + /* analyze @irq_stat */ + ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat); + + if (irq_stat & PORT_IRQ_TF_ERR) + err_mask |= AC_ERR_DEV; + + if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) { + err_mask |= AC_ERR_HOST_BUS; + action |= ATA_EH_SOFTRESET; + } + + if (irq_stat & PORT_IRQ_IF_ERR) { + err_mask |= AC_ERR_ATA_BUS; + action |= ATA_EH_SOFTRESET; + ata_ehi_push_desc(ehi, ", interface fatal error"); + } + + if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) { + ata_ehi_hotplugged(ehi); + ata_ehi_push_desc(ehi, ", %s", irq_stat & PORT_IRQ_CONNECT ? + "connection status changed" : "PHY RDY changed"); + } + + if (irq_stat & PORT_IRQ_UNK_FIS) { + u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK); + + err_mask |= AC_ERR_HSM; + action |= ATA_EH_SOFTRESET; + ata_ehi_push_desc(ehi, ", unknown FIS %08x %08x %08x %08x", + unk[0], unk[1], unk[2], unk[3]); + } + + /* okay, let's hand over to EH */ + ehi->serror |= serror; + ehi->action |= action; + + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc) + qc->err_mask |= err_mask; + else + ehi->err_mask |= err_mask; + + if (irq_stat & PORT_IRQ_FREEZE) + ata_port_freeze(ap); + else + ata_port_abort(ap); +} + +static void ahci_host_intr(struct ata_port *ap) +{ + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + struct ata_eh_info *ehi = &ap->eh_info; + u32 status, qc_active; + int rc; + + status = readl(port_mmio + PORT_IRQ_STAT); + writel(status, port_mmio + PORT_IRQ_STAT); + + if (unlikely(status & PORT_IRQ_ERROR)) { + ahci_error_intr(ap, status); + return; + } + + if (ap->sactive) + qc_active = readl(port_mmio + PORT_SCR_ACT); + else + qc_active = readl(port_mmio + PORT_CMD_ISSUE); + + rc = ata_qc_complete_multiple(ap, qc_active, NULL); + if (rc > 0) + return; + if (rc < 0) { + ehi->err_mask |= AC_ERR_HSM; + ehi->action |= ATA_EH_SOFTRESET; + ata_port_freeze(ap); + return; + } + + /* hmmm... a spurious interupt */ + + /* some devices send D2H reg with I bit set during NCQ command phase */ + if (ap->sactive && status & PORT_IRQ_D2H_REG_FIS) + return; + + /* ignore interim PIO setup fis interrupts */ + if (ata_tag_valid(ap->active_tag) && (status & PORT_IRQ_PIOS_FIS)) + return; + + if (ata_ratelimit()) + ata_port_printk(ap, KERN_INFO, "spurious interrupt " + "(irq_stat 0x%x active_tag %d sactive 0x%x)\n", + status, ap->active_tag, ap->sactive); +} + +static void ahci_irq_clear(struct ata_port *ap) +{ + /* TODO */ +} + +static irqreturn_t ahci_interrupt(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + struct ahci_host_priv *hpriv; + unsigned int i, handled = 0; + void __iomem *mmio; + u32 irq_stat, irq_ack = 0; + + VPRINTK("ENTER\n"); + + hpriv = host_set->private_data; + mmio = host_set->mmio_base; + + /* sigh. 0xffffffff is a valid return from h/w */ + irq_stat = readl(mmio + HOST_IRQ_STAT); + irq_stat &= hpriv->port_map; + if (!irq_stat) + return IRQ_NONE; + + spin_lock(&host_set->lock); + + for (i = 0; i < host_set->n_ports; i++) { + struct ata_port *ap; + + if (!(irq_stat & (1 << i))) + continue; + + ap = host_set->ports[i]; + if (ap) { + ahci_host_intr(ap); + VPRINTK("port %u\n", i); + } else { + VPRINTK("port %u (no irq)\n", i); + if (ata_ratelimit()) + dev_printk(KERN_WARNING, host_set->dev, + "interrupt on disabled port %u\n", i); + } + + irq_ack |= (1 << i); + } + + if (irq_ack) { + writel(irq_ack, mmio + HOST_IRQ_STAT); + handled = 1; + } + + spin_unlock(&host_set->lock); + + VPRINTK("EXIT\n"); + + return IRQ_RETVAL(handled); +} + +static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; + + if (qc->tf.protocol == ATA_PROT_NCQ) + writel(1 << qc->tag, port_mmio + PORT_SCR_ACT); + writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE); + readl(port_mmio + PORT_CMD_ISSUE); /* flush */ + + return 0; +} + +static void ahci_freeze(struct ata_port *ap) +{ + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + + /* turn IRQ off */ + writel(0, port_mmio + PORT_IRQ_MASK); +} + +static void ahci_thaw(struct ata_port *ap) +{ + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + u32 tmp; + + /* clear IRQ */ + tmp = readl(port_mmio + PORT_IRQ_STAT); + writel(tmp, port_mmio + PORT_IRQ_STAT); + writel(1 << ap->id, mmio + HOST_IRQ_STAT); + + /* turn IRQ back on */ + writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK); +} + +static void ahci_error_handler(struct ata_port *ap) +{ + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + + if (!(ap->pflags & ATA_PFLAG_FROZEN)) { + /* restart engine */ + ahci_stop_engine(port_mmio); + ahci_start_engine(port_mmio); + } + + /* perform recovery */ + ata_do_eh(ap, ahci_prereset, ahci_softreset, ahci_hardreset, + ahci_postreset); +} + +static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + + if (qc->flags & ATA_QCFLAG_FAILED) + qc->err_mask |= AC_ERR_OTHER; + + if (qc->err_mask) { + /* make DMA engine forget about the failed command */ + ahci_stop_engine(port_mmio); + ahci_start_engine(port_mmio); + } +} + +static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg) +{ + struct ahci_host_priv *hpriv = ap->host_set->private_data; + struct ahci_port_priv *pp = ap->private_data; + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + const char *emsg = NULL; + int rc; + + rc = ahci_deinit_port(port_mmio, hpriv->cap, &emsg); + if (rc) { + ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc); + ahci_init_port(port_mmio, hpriv->cap, + pp->cmd_slot_dma, pp->rx_fis_dma); + } + + return rc; +} + +static int ahci_port_resume(struct ata_port *ap) +{ + struct ahci_port_priv *pp = ap->private_data; + struct ahci_host_priv *hpriv = ap->host_set->private_data; + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + + ahci_init_port(port_mmio, hpriv->cap, pp->cmd_slot_dma, pp->rx_fis_dma); + + return 0; +} + +static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) +{ + struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); + void __iomem *mmio = host_set->mmio_base; + u32 ctl; + + if (mesg.event == PM_EVENT_SUSPEND) { + /* AHCI spec rev1.1 section 8.3.3: + * Software must disable interrupts prior to requesting a + * transition of the HBA to D3 state. + */ + ctl = readl(mmio + HOST_CTL); + ctl &= ~HOST_IRQ_EN; + writel(ctl, mmio + HOST_CTL); + readl(mmio + HOST_CTL); /* flush */ + } + + return ata_pci_device_suspend(pdev, mesg); +} + +static int ahci_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); + struct ahci_host_priv *hpriv = host_set->private_data; + void __iomem *mmio = host_set->mmio_base; + int rc; + + ata_pci_device_do_resume(pdev); + + if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { + rc = ahci_reset_controller(mmio, pdev); + if (rc) + return rc; + + ahci_init_controller(mmio, pdev, host_set->n_ports, hpriv->cap); + } + + ata_host_set_resume(host_set); + + return 0; +} + +static int ahci_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct ahci_host_priv *hpriv = ap->host_set->private_data; + struct ahci_port_priv *pp; + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + void *mem; + dma_addr_t mem_dma; + int rc; + + pp = kmalloc(sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + memset(pp, 0, sizeof(*pp)); + + rc = ata_pad_alloc(ap, dev); + if (rc) { + kfree(pp); + return rc; + } + + mem = dma_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma, GFP_KERNEL); + if (!mem) { + ata_pad_free(ap, dev); + kfree(pp); + return -ENOMEM; + } + memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ); + + /* + * First item in chunk of DMA memory: 32-slot command table, + * 32 bytes each in size + */ + pp->cmd_slot = mem; + pp->cmd_slot_dma = mem_dma; + + mem += AHCI_CMD_SLOT_SZ; + mem_dma += AHCI_CMD_SLOT_SZ; + + /* + * Second item: Received-FIS area + */ + pp->rx_fis = mem; + pp->rx_fis_dma = mem_dma; + + mem += AHCI_RX_FIS_SZ; + mem_dma += AHCI_RX_FIS_SZ; + + /* + * Third item: data area for storing a single command + * and its scatter-gather table + */ + pp->cmd_tbl = mem; + pp->cmd_tbl_dma = mem_dma; + + ap->private_data = pp; + + /* initialize port */ + ahci_init_port(port_mmio, hpriv->cap, pp->cmd_slot_dma, pp->rx_fis_dma); + + return 0; +} + +static void ahci_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct ahci_host_priv *hpriv = ap->host_set->private_data; + struct ahci_port_priv *pp = ap->private_data; + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + const char *emsg = NULL; + int rc; + + /* de-initialize port */ + rc = ahci_deinit_port(port_mmio, hpriv->cap, &emsg); + if (rc) + ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc); + + ap->private_data = NULL; + dma_free_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, + pp->cmd_slot, pp->cmd_slot_dma); + ata_pad_free(ap, dev); + kfree(pp); +} + +static void ahci_setup_port(struct ata_ioports *port, unsigned long base, + unsigned int port_idx) +{ + VPRINTK("ENTER, base==0x%lx, port_idx %u\n", base, port_idx); + base = ahci_port_base_ul(base, port_idx); + VPRINTK("base now==0x%lx\n", base); + + port->cmd_addr = base; + port->scr_addr = base + PORT_SCR; + + VPRINTK("EXIT\n"); +} + +static int ahci_host_init(struct ata_probe_ent *probe_ent) +{ + struct ahci_host_priv *hpriv = probe_ent->private_data; + struct pci_dev *pdev = to_pci_dev(probe_ent->dev); + void __iomem *mmio = probe_ent->mmio_base; + unsigned int i, using_dac; + int rc; + + rc = ahci_reset_controller(mmio, pdev); + if (rc) + return rc; + + hpriv->cap = readl(mmio + HOST_CAP); + hpriv->port_map = readl(mmio + HOST_PORTS_IMPL); + probe_ent->n_ports = (hpriv->cap & 0x1f) + 1; + + VPRINTK("cap 0x%x port_map 0x%x n_ports %d\n", + hpriv->cap, hpriv->port_map, probe_ent->n_ports); + + using_dac = hpriv->cap & HOST_CAP_64; + if (using_dac && + !pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { + rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); + if (rc) { + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "64-bit DMA enable failed\n"); + return rc; + } + } + } else { + rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "32-bit DMA enable failed\n"); + return rc; + } + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "32-bit consistent DMA enable failed\n"); + return rc; + } + } + + for (i = 0; i < probe_ent->n_ports; i++) + ahci_setup_port(&probe_ent->port[i], (unsigned long) mmio, i); + + ahci_init_controller(mmio, pdev, probe_ent->n_ports, hpriv->cap); + + pci_set_master(pdev); + + return 0; +} + +static void ahci_print_info(struct ata_probe_ent *probe_ent) +{ + struct ahci_host_priv *hpriv = probe_ent->private_data; + struct pci_dev *pdev = to_pci_dev(probe_ent->dev); + void __iomem *mmio = probe_ent->mmio_base; + u32 vers, cap, impl, speed; + const char *speed_s; + u16 cc; + const char *scc_s; + + vers = readl(mmio + HOST_VERSION); + cap = hpriv->cap; + impl = hpriv->port_map; + + speed = (cap >> 20) & 0xf; + if (speed == 1) + speed_s = "1.5"; + else if (speed == 2) + speed_s = "3"; + else + speed_s = "?"; + + pci_read_config_word(pdev, 0x0a, &cc); + if (cc == 0x0101) + scc_s = "IDE"; + else if (cc == 0x0106) + scc_s = "SATA"; + else if (cc == 0x0104) + scc_s = "RAID"; + else + scc_s = "unknown"; + + dev_printk(KERN_INFO, &pdev->dev, + "AHCI %02x%02x.%02x%02x " + "%u slots %u ports %s Gbps 0x%x impl %s mode\n" + , + + (vers >> 24) & 0xff, + (vers >> 16) & 0xff, + (vers >> 8) & 0xff, + vers & 0xff, + + ((cap >> 8) & 0x1f) + 1, + (cap & 0x1f) + 1, + speed_s, + impl, + scc_s); + + dev_printk(KERN_INFO, &pdev->dev, + "flags: " + "%s%s%s%s%s%s" + "%s%s%s%s%s%s%s\n" + , + + cap & (1 << 31) ? "64bit " : "", + cap & (1 << 30) ? "ncq " : "", + cap & (1 << 28) ? "ilck " : "", + cap & (1 << 27) ? "stag " : "", + cap & (1 << 26) ? "pm " : "", + cap & (1 << 25) ? "led " : "", + + cap & (1 << 24) ? "clo " : "", + cap & (1 << 19) ? "nz " : "", + cap & (1 << 18) ? "only " : "", + cap & (1 << 17) ? "pmp " : "", + cap & (1 << 15) ? "pio " : "", + cap & (1 << 14) ? "slum " : "", + cap & (1 << 13) ? "part " : "" + ); +} + +static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + struct ata_probe_ent *probe_ent = NULL; + struct ahci_host_priv *hpriv; + unsigned long base; + void __iomem *mmio_base; + unsigned int board_idx = (unsigned int) ent->driver_data; + int have_msi, pci_dev_busy = 0; + int rc; + + VPRINTK("ENTER\n"); + + WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS); + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + + /* JMicron-specific fixup: make sure we're in AHCI mode */ + /* This is protected from races with ata_jmicron by the pci probe + locking */ + if (pdev->vendor == PCI_VENDOR_ID_JMICRON) { + /* AHCI enable, AHCI on function 0 */ + pci_write_config_byte(pdev, 0x41, 0xa1); + /* Function 1 is the PATA controller */ + if (PCI_FUNC(pdev->devfn)) + return -ENODEV; + } + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) { + pci_dev_busy = 1; + goto err_out; + } + + if (pci_enable_msi(pdev) == 0) + have_msi = 1; + else { + pci_intx(pdev, 1); + have_msi = 0; + } + + probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); + if (probe_ent == NULL) { + rc = -ENOMEM; + goto err_out_msi; + } + + memset(probe_ent, 0, sizeof(*probe_ent)); + probe_ent->dev = pci_dev_to_dev(pdev); + INIT_LIST_HEAD(&probe_ent->node); + + mmio_base = pci_iomap(pdev, AHCI_PCI_BAR, 0); + if (mmio_base == NULL) { + rc = -ENOMEM; + goto err_out_free_ent; + } + base = (unsigned long) mmio_base; + + hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) { + rc = -ENOMEM; + goto err_out_iounmap; + } + memset(hpriv, 0, sizeof(*hpriv)); + + probe_ent->sht = ahci_port_info[board_idx].sht; + probe_ent->host_flags = ahci_port_info[board_idx].host_flags; + probe_ent->pio_mask = ahci_port_info[board_idx].pio_mask; + probe_ent->udma_mask = ahci_port_info[board_idx].udma_mask; + probe_ent->port_ops = ahci_port_info[board_idx].port_ops; + + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = IRQF_SHARED; + probe_ent->mmio_base = mmio_base; + probe_ent->private_data = hpriv; + + if (have_msi) + hpriv->flags |= AHCI_FLAG_MSI; + + /* initialize adapter */ + rc = ahci_host_init(probe_ent); + if (rc) + goto err_out_hpriv; + + if (!(probe_ent->host_flags & AHCI_FLAG_NO_NCQ) && + (hpriv->cap & HOST_CAP_NCQ)) + probe_ent->host_flags |= ATA_FLAG_NCQ; + + ahci_print_info(probe_ent); + + /* FIXME: check ata_device_add return value */ + ata_device_add(probe_ent); + kfree(probe_ent); + + return 0; + +err_out_hpriv: + kfree(hpriv); +err_out_iounmap: + pci_iounmap(pdev, mmio_base); +err_out_free_ent: + kfree(probe_ent); +err_out_msi: + if (have_msi) + pci_disable_msi(pdev); + else + pci_intx(pdev, 0); + pci_release_regions(pdev); +err_out: + if (!pci_dev_busy) + pci_disable_device(pdev); + return rc; +} + +static void ahci_remove_one (struct pci_dev *pdev) +{ + struct device *dev = pci_dev_to_dev(pdev); + struct ata_host_set *host_set = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host_set->private_data; + unsigned int i; + int have_msi; + + for (i = 0; i < host_set->n_ports; i++) + ata_port_detach(host_set->ports[i]); + + have_msi = hpriv->flags & AHCI_FLAG_MSI; + free_irq(host_set->irq, host_set); + + for (i = 0; i < host_set->n_ports; i++) { + struct ata_port *ap = host_set->ports[i]; + + ata_scsi_release(ap->host); + scsi_host_put(ap->host); + } + + kfree(hpriv); + pci_iounmap(pdev, host_set->mmio_base); + kfree(host_set); + + if (have_msi) + pci_disable_msi(pdev); + else + pci_intx(pdev, 0); + pci_release_regions(pdev); + pci_disable_device(pdev); + dev_set_drvdata(dev, NULL); +} + +static int __init ahci_init(void) +{ + return pci_register_driver(&ahci_pci_driver); +} + +static void __exit ahci_exit(void) +{ + pci_unregister_driver(&ahci_pci_driver); +} + + +MODULE_AUTHOR("Jeff Garzik"); +MODULE_DESCRIPTION("AHCI SATA low-level driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, ahci_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +module_init(ahci_init); +module_exit(ahci_exit); diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c new file mode 100644 index 00000000000..46c34fd5af8 --- /dev/null +++ b/drivers/ata/ata_piix.c @@ -0,0 +1,960 @@ +/* + * ata_piix.c - Intel PATA/SATA controllers + * + * Maintained by: Jeff Garzik + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * + * Copyright 2003-2005 Red Hat Inc + * Copyright 2003-2005 Jeff Garzik + * + * + * Copyright header from piix.c: + * + * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer + * Copyright (C) 1998-2000 Andre Hedrick + * Copyright (C) 2003 Red Hat Inc + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available at http://developer.intel.com/ + * + * Documentation + * Publically available from Intel web site. Errata documentation + * is also publically available. As an aide to anyone hacking on this + * driver the list of errata that are relevant is below.going back to + * PIIX4. Older device documentation is now a bit tricky to find. + * + * The chipsets all follow very much the same design. The orginal Triton + * series chipsets do _not_ support independant device timings, but this + * is fixed in Triton II. With the odd mobile exception the chips then + * change little except in gaining more modes until SATA arrives. This + * driver supports only the chips with independant timing (that is those + * with SITRE and the 0x44 timing register). See pata_oldpiix and pata_mpiix + * for the early chip drivers. + * + * Errata of note: + * + * Unfixable + * PIIX4 errata #9 - Only on ultra obscure hw + * ICH3 errata #13 - Not observed to affect real hw + * by Intel + * + * Things we must deal with + * PIIX4 errata #10 - BM IDE hang with non UDMA + * (must stop/start dma to recover) + * 440MX errata #15 - As PIIX4 errata #10 + * PIIX4 errata #15 - Must not read control registers + * during a PIO transfer + * 440MX errata #13 - As PIIX4 errata #15 + * ICH2 errata #21 - DMA mode 0 doesn't work right + * ICH0/1 errata #55 - As ICH2 errata #21 + * ICH2 spec c #9 - Extra operations needed to handle + * drive hotswap [NOT YET SUPPORTED] + * ICH2 spec c #20 - IDE PRD must not cross a 64K boundary + * and must be dword aligned + * ICH2 spec c #24 - UDMA mode 4,5 t85/86 should be 6ns not 3.3 + * + * Should have been BIOS fixed: + * 450NX: errata #19 - DMA hangs on old 450NX + * 450NX: errata #20 - DMA hangs on old 450NX + * 450NX: errata #25 - Corruption with DMA on old 450NX + * ICH3 errata #15 - IDE deadlock under high load + * (BIOS must set dev 31 fn 0 bit 23) + * ICH3 errata #18 - Don't use native mode + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "ata_piix" +#define DRV_VERSION "2.00" + +enum { + PIIX_IOCFG = 0x54, /* IDE I/O configuration register */ + ICH5_PMR = 0x90, /* port mapping register */ + ICH5_PCS = 0x92, /* port control and status */ + PIIX_SCC = 0x0A, /* sub-class code register */ + + PIIX_FLAG_IGNORE_PCS = (1 << 25), /* ignore PCS present bits */ + PIIX_FLAG_SCR = (1 << 26), /* SCR available */ + PIIX_FLAG_AHCI = (1 << 27), /* AHCI possible */ + PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */ + + /* combined mode. if set, PATA is channel 0. + * if clear, PATA is channel 1. + */ + PIIX_PORT_ENABLED = (1 << 0), + PIIX_PORT_PRESENT = (1 << 4), + + PIIX_80C_PRI = (1 << 5) | (1 << 4), + PIIX_80C_SEC = (1 << 7) | (1 << 6), + + /* controller IDs */ + piix4_pata = 0, + ich5_pata = 1, + ich5_sata = 2, + esb_sata = 3, + ich6_sata = 4, + ich6_sata_ahci = 5, + ich6m_sata_ahci = 6, + ich8_sata_ahci = 7, + + /* constants for mapping table */ + P0 = 0, /* port 0 */ + P1 = 1, /* port 1 */ + P2 = 2, /* port 2 */ + P3 = 3, /* port 3 */ + IDE = -1, /* IDE */ + NA = -2, /* not avaliable */ + RV = -3, /* reserved */ + + PIIX_AHCI_DEVICE = 6, +}; + +struct piix_map_db { + const u32 mask; + const u16 port_enable; + const int present_shift; + const int map[][4]; +}; + +struct piix_host_priv { + const int *map; + const struct piix_map_db *map_db; +}; + +static int piix_init_one (struct pci_dev *pdev, + const struct pci_device_id *ent); +static void piix_host_stop(struct ata_host_set *host_set); +static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev); +static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev); +static void piix_pata_error_handler(struct ata_port *ap); +static void piix_sata_error_handler(struct ata_port *ap); + +static unsigned int in_module_init = 1; + +static const struct pci_device_id piix_pci_tbl[] = { +#ifdef ATA_ENABLE_PATA + { 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix4_pata }, + { 0x8086, 0x24db, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, + { 0x8086, 0x25a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, + { 0x8086, 0x27df, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, +#endif + + /* NOTE: The following PCI ids must be kept in sync with the + * list in drivers/pci/quirks.c. + */ + + /* 82801EB (ICH5) */ + { 0x8086, 0x24d1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, + /* 82801EB (ICH5) */ + { 0x8086, 0x24df, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, + /* 6300ESB (ICH5 variant with broken PCS present bits) */ + { 0x8086, 0x25a3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, esb_sata }, + /* 6300ESB pretending RAID */ + { 0x8086, 0x25b0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, esb_sata }, + /* 82801FB/FW (ICH6/ICH6W) */ + { 0x8086, 0x2651, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata }, + /* 82801FR/FRW (ICH6R/ICH6RW) */ + { 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, + /* 82801FBM ICH6M (ICH6R with only port 0 and 2 implemented) */ + { 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci }, + /* 82801GB/GR/GH (ICH7, identical to ICH6) */ + { 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, + /* 2801GBM/GHM (ICH7M, identical to ICH6M) */ + { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci }, + /* Enterprise Southbridge 2 (where's the datasheet?) */ + { 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, + /* SATA Controller 1 IDE (ICH8, no datasheet yet) */ + { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, + /* SATA Controller 2 IDE (ICH8, ditto) */ + { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, + /* Mobile SATA Controller IDE (ICH8M, ditto) */ + { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, + + { } /* terminate list */ +}; + +static struct pci_driver piix_pci_driver = { + .name = DRV_NAME, + .id_table = piix_pci_tbl, + .probe = piix_init_one, + .remove = ata_pci_remove_one, + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +}; + +static struct scsi_host_template piix_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, + .resume = ata_scsi_device_resume, + .suspend = ata_scsi_device_suspend, +}; + +static const struct ata_port_operations piix_pata_ops = { + .port_disable = ata_port_disable, + .set_piomode = piix_set_piomode, + .set_dmamode = piix_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = piix_pata_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = piix_host_stop, +}; + +static const struct ata_port_operations piix_sata_ops = { + .port_disable = ata_port_disable, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = piix_sata_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = piix_host_stop, +}; + +static const struct piix_map_db ich5_map_db = { + .mask = 0x7, + .port_enable = 0x3, + .present_shift = 4, + .map = { + /* PM PS SM SS MAP */ + { P0, NA, P1, NA }, /* 000b */ + { P1, NA, P0, NA }, /* 001b */ + { RV, RV, RV, RV }, + { RV, RV, RV, RV }, + { P0, P1, IDE, IDE }, /* 100b */ + { P1, P0, IDE, IDE }, /* 101b */ + { IDE, IDE, P0, P1 }, /* 110b */ + { IDE, IDE, P1, P0 }, /* 111b */ + }, +}; + +static const struct piix_map_db ich6_map_db = { + .mask = 0x3, + .port_enable = 0xf, + .present_shift = 4, + .map = { + /* PM PS SM SS MAP */ + { P0, P2, P1, P3 }, /* 00b */ + { IDE, IDE, P1, P3 }, /* 01b */ + { P0, P2, IDE, IDE }, /* 10b */ + { RV, RV, RV, RV }, + }, +}; + +static const struct piix_map_db ich6m_map_db = { + .mask = 0x3, + .port_enable = 0x5, + .present_shift = 4, + .map = { + /* PM PS SM SS MAP */ + { P0, P2, RV, RV }, /* 00b */ + { RV, RV, RV, RV }, + { P0, P2, IDE, IDE }, /* 10b */ + { RV, RV, RV, RV }, + }, +}; + +static const struct piix_map_db ich8_map_db = { + .mask = 0x3, + .port_enable = 0x3, + .present_shift = 8, + .map = { + /* PM PS SM SS MAP */ + { P0, NA, P1, NA }, /* 00b (hardwired) */ + { RV, RV, RV, RV }, + { RV, RV, RV, RV }, /* 10b (never) */ + { RV, RV, RV, RV }, + }, +}; + +static const struct piix_map_db *piix_map_db_table[] = { + [ich5_sata] = &ich5_map_db, + [esb_sata] = &ich5_map_db, + [ich6_sata] = &ich6_map_db, + [ich6_sata_ahci] = &ich6_map_db, + [ich6m_sata_ahci] = &ich6m_map_db, + [ich8_sata_ahci] = &ich8_map_db, +}; + +static struct ata_port_info piix_port_info[] = { + /* piix4_pata */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = 0x1f, /* pio0-4 */ +#if 0 + .mwdma_mask = 0x06, /* mwdma1-2 */ +#else + .mwdma_mask = 0x00, /* mwdma broken */ +#endif + .udma_mask = ATA_UDMA_MASK_40C, + .port_ops = &piix_pata_ops, + }, + + /* ich5_pata */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SLAVE_POSS | PIIX_FLAG_CHECKINTR, + .pio_mask = 0x1f, /* pio0-4 */ +#if 0 + .mwdma_mask = 0x06, /* mwdma1-2 */ +#else + .mwdma_mask = 0x00, /* mwdma broken */ +#endif + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &piix_pata_ops, + }, + + /* ich5_sata */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &piix_sata_ops, + }, + + /* i6300esb_sata */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SATA | + PIIX_FLAG_CHECKINTR | PIIX_FLAG_IGNORE_PCS, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &piix_sata_ops, + }, + + /* ich6_sata */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SATA | + PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &piix_sata_ops, + }, + + /* ich6_sata_ahci */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SATA | + PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | + PIIX_FLAG_AHCI, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &piix_sata_ops, + }, + + /* ich6m_sata_ahci */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SATA | + PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | + PIIX_FLAG_AHCI, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &piix_sata_ops, + }, + + /* ich8_sata_ahci */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SATA | + PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | + PIIX_FLAG_AHCI, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &piix_sata_ops, + }, +}; + +static struct pci_bits piix_enable_bits[] = { + { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */ + { 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */ +}; + +MODULE_AUTHOR("Andre Hedrick, Alan Cox, Andrzej Krzysztofowicz, Jeff Garzik"); +MODULE_DESCRIPTION("SCSI low-level driver for Intel PIIX/ICH ATA controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, piix_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +/** + * piix_pata_cbl_detect - Probe host controller cable detect info + * @ap: Port for which cable detect info is desired + * + * Read 80c cable indicator from ATA PCI device's PCI config + * register. This register is normally set by firmware (BIOS). + * + * LOCKING: + * None (inherited from caller). + */ +static void piix_pata_cbl_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + u8 tmp, mask; + + /* no 80c support in host controller? */ + if ((ap->udma_mask & ~ATA_UDMA_MASK_40C) == 0) + goto cbl40; + + /* check BIOS cable detect results */ + mask = ap->port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC; + pci_read_config_byte(pdev, PIIX_IOCFG, &tmp); + if ((tmp & mask) == 0) + goto cbl40; + + ap->cbl = ATA_CBL_PATA80; + return; + +cbl40: + ap->cbl = ATA_CBL_PATA40; + ap->udma_mask &= ATA_UDMA_MASK_40C; +} + +/** + * piix_pata_prereset - prereset for PATA host controller + * @ap: Target port + * + * Prereset including cable detection. + * + * LOCKING: + * None (inherited from caller). + */ +static int piix_pata_prereset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + + if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no])) { + ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n"); + ap->eh_context.i.action &= ~ATA_EH_RESET_MASK; + return 0; + } + + piix_pata_cbl_detect(ap); + + return ata_std_prereset(ap); +} + +static void piix_pata_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, piix_pata_prereset, ata_std_softreset, NULL, + ata_std_postreset); +} + +/** + * piix_sata_prereset - prereset for SATA host controller + * @ap: Target port + * + * Reads and configures SATA PCI device's PCI config register + * Port Configuration and Status (PCS) to determine port and + * device availability. Return -ENODEV to skip reset if no + * device is present. + * + * LOCKING: + * None (inherited from caller). + * + * RETURNS: + * 0 if device is present, -ENODEV otherwise. + */ +static int piix_sata_prereset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + struct piix_host_priv *hpriv = ap->host_set->private_data; + const unsigned int *map = hpriv->map; + int base = 2 * ap->port_no; + unsigned int present = 0; + int port, i; + u16 pcs; + + pci_read_config_word(pdev, ICH5_PCS, &pcs); + DPRINTK("ata%u: ENTER, pcs=0x%x base=%d\n", ap->id, pcs, base); + + for (i = 0; i < 2; i++) { + port = map[base + i]; + if (port < 0) + continue; + if ((ap->flags & PIIX_FLAG_IGNORE_PCS) || + (pcs & 1 << (hpriv->map_db->present_shift + port))) + present = 1; + } + + DPRINTK("ata%u: LEAVE, pcs=0x%x present=0x%x\n", + ap->id, pcs, present); + + if (!present) { + ata_port_printk(ap, KERN_INFO, "SATA port has no device.\n"); + ap->eh_context.i.action &= ~ATA_EH_RESET_MASK; + return 0; + } + + return ata_std_prereset(ap); +} + +static void piix_sata_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, piix_sata_prereset, ata_std_softreset, NULL, + ata_std_postreset); +} + +/** + * piix_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: um + * + * Set PIO mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + struct pci_dev *dev = to_pci_dev(ap->host_set->dev); + unsigned int is_slave = (adev->devno != 0); + unsigned int master_port= ap->port_no ? 0x42 : 0x40; + unsigned int slave_port = 0x44; + u16 master_data; + u8 slave_data; + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + pci_read_config_word(dev, master_port, &master_data); + if (is_slave) { + master_data |= 0x4000; + /* enable PPE, IE and TIME */ + master_data |= 0x0070; + pci_read_config_byte(dev, slave_port, &slave_data); + slave_data &= (ap->port_no ? 0x0f : 0xf0); + slave_data |= + (timings[pio][0] << 2) | + (timings[pio][1] << (ap->port_no ? 4 : 0)); + } else { + master_data &= 0xccf8; + /* enable PPE, IE and TIME */ + master_data |= 0x0007; + master_data |= + (timings[pio][0] << 12) | + (timings[pio][1] << 8); + } + pci_write_config_word(dev, master_port, master_data); + if (is_slave) + pci_write_config_byte(dev, slave_port, slave_data); +} + +/** + * piix_set_dmamode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: um + * @udma: udma mode, 0 - 6 + * + * Set UDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + unsigned int udma = adev->dma_mode; /* FIXME: MWDMA too */ + struct pci_dev *dev = to_pci_dev(ap->host_set->dev); + u8 maslave = ap->port_no ? 0x42 : 0x40; + u8 speed = udma; + unsigned int drive_dn = (ap->port_no ? 2 : 0) + adev->devno; + int a_speed = 3 << (drive_dn * 4); + int u_flag = 1 << drive_dn; + int v_flag = 0x01 << drive_dn; + int w_flag = 0x10 << drive_dn; + int u_speed = 0; + int sitre; + u16 reg4042, reg4a; + u8 reg48, reg54, reg55; + + pci_read_config_word(dev, maslave, ®4042); + DPRINTK("reg4042 = 0x%04x\n", reg4042); + sitre = (reg4042 & 0x4000) ? 1 : 0; + pci_read_config_byte(dev, 0x48, ®48); + pci_read_config_word(dev, 0x4a, ®4a); + pci_read_config_byte(dev, 0x54, ®54); + pci_read_config_byte(dev, 0x55, ®55); + + switch(speed) { + case XFER_UDMA_4: + case XFER_UDMA_2: u_speed = 2 << (drive_dn * 4); break; + case XFER_UDMA_6: + case XFER_UDMA_5: + case XFER_UDMA_3: + case XFER_UDMA_1: u_speed = 1 << (drive_dn * 4); break; + case XFER_UDMA_0: u_speed = 0 << (drive_dn * 4); break; + case XFER_MW_DMA_2: + case XFER_MW_DMA_1: break; + default: + BUG(); + return; + } + + if (speed >= XFER_UDMA_0) { + if (!(reg48 & u_flag)) + pci_write_config_byte(dev, 0x48, reg48 | u_flag); + if (speed == XFER_UDMA_5) { + pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag); + } else { + pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); + } + if ((reg4a & a_speed) != u_speed) + pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed); + if (speed > XFER_UDMA_2) { + if (!(reg54 & v_flag)) + pci_write_config_byte(dev, 0x54, reg54 | v_flag); + } else + pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); + } else { + if (reg48 & u_flag) + pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); + if (reg4a & a_speed) + pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); + if (reg54 & v_flag) + pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); + if (reg55 & w_flag) + pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); + } +} + +#define AHCI_PCI_BAR 5 +#define AHCI_GLOBAL_CTL 0x04 +#define AHCI_ENABLE (1 << 31) +static int piix_disable_ahci(struct pci_dev *pdev) +{ + void __iomem *mmio; + u32 tmp; + int rc = 0; + + /* BUG: pci_enable_device has not yet been called. This + * works because this device is usually set up by BIOS. + */ + + if (!pci_resource_start(pdev, AHCI_PCI_BAR) || + !pci_resource_len(pdev, AHCI_PCI_BAR)) + return 0; + + mmio = pci_iomap(pdev, AHCI_PCI_BAR, 64); + if (!mmio) + return -ENOMEM; + + tmp = readl(mmio + AHCI_GLOBAL_CTL); + if (tmp & AHCI_ENABLE) { + tmp &= ~AHCI_ENABLE; + writel(tmp, mmio + AHCI_GLOBAL_CTL); + + tmp = readl(mmio + AHCI_GLOBAL_CTL); + if (tmp & AHCI_ENABLE) + rc = -EIO; + } + + pci_iounmap(pdev, mmio); + return rc; +} + +/** + * piix_check_450nx_errata - Check for problem 450NX setup + * @ata_dev: the PCI device to check + * + * Check for the present of 450NX errata #19 and errata #25. If + * they are found return an error code so we can turn off DMA + */ + +static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev) +{ + struct pci_dev *pdev = NULL; + u16 cfg; + u8 rev; + int no_piix_dma = 0; + + while((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev)) != NULL) + { + /* Look for 450NX PXB. Check for problem configurations + A PCI quirk checks bit 6 already */ + pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); + pci_read_config_word(pdev, 0x41, &cfg); + /* Only on the original revision: IDE DMA can hang */ + if (rev == 0x00) + no_piix_dma = 1; + /* On all revisions below 5 PXB bus lock must be disabled for IDE */ + else if (cfg & (1<<14) && rev < 5) + no_piix_dma = 2; + } + if (no_piix_dma) + dev_printk(KERN_WARNING, &ata_dev->dev, "450NX errata present, disabling IDE DMA.\n"); + if (no_piix_dma == 2) + dev_printk(KERN_WARNING, &ata_dev->dev, "A BIOS update may resolve this.\n"); + return no_piix_dma; +} + +static void __devinit piix_init_pcs(struct pci_dev *pdev, + const struct piix_map_db *map_db) +{ + u16 pcs, new_pcs; + + pci_read_config_word(pdev, ICH5_PCS, &pcs); + + new_pcs = pcs | map_db->port_enable; + + if (new_pcs != pcs) { + DPRINTK("updating PCS from 0x%x to 0x%x\n", pcs, new_pcs); + pci_write_config_word(pdev, ICH5_PCS, new_pcs); + msleep(150); + } +} + +static void __devinit piix_init_sata_map(struct pci_dev *pdev, + struct ata_port_info *pinfo, + const struct piix_map_db *map_db) +{ + struct piix_host_priv *hpriv = pinfo[0].private_data; + const unsigned int *map; + int i, invalid_map = 0; + u8 map_value; + + pci_read_config_byte(pdev, ICH5_PMR, &map_value); + + map = map_db->map[map_value & map_db->mask]; + + dev_printk(KERN_INFO, &pdev->dev, "MAP ["); + for (i = 0; i < 4; i++) { + switch (map[i]) { + case RV: + invalid_map = 1; + printk(" XX"); + break; + + case NA: + printk(" --"); + break; + + case IDE: + WARN_ON((i & 1) || map[i + 1] != IDE); + pinfo[i / 2] = piix_port_info[ich5_pata]; + pinfo[i / 2].private_data = hpriv; + i++; + printk(" IDE IDE"); + break; + + default: + printk(" P%d", map[i]); + if (i & 1) + pinfo[i / 2].host_flags |= ATA_FLAG_SLAVE_POSS; + break; + } + } + printk(" ]\n"); + + if (invalid_map) + dev_printk(KERN_ERR, &pdev->dev, + "invalid MAP value %u\n", map_value); + + hpriv->map = map; + hpriv->map_db = map_db; +} + +/** + * piix_init_one - Register PIIX ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in piix_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. We probe for combined mode (sigh), + * and then hand over control to libata, for it to do the rest. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + struct ata_port_info port_info[2]; + struct ata_port_info *ppinfo[2] = { &port_info[0], &port_info[1] }; + struct piix_host_priv *hpriv; + unsigned long host_flags; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, + "version " DRV_VERSION "\n"); + + /* no hotplugging support (FIXME) */ + if (!in_module_init) + return -ENODEV; + + hpriv = kzalloc(sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) + return -ENOMEM; + + port_info[0] = piix_port_info[ent->driver_data]; + port_info[1] = piix_port_info[ent->driver_data]; + port_info[0].private_data = hpriv; + port_info[1].private_data = hpriv; + + host_flags = port_info[0].host_flags; + + if (host_flags & PIIX_FLAG_AHCI) { + u8 tmp; + pci_read_config_byte(pdev, PIIX_SCC, &tmp); + if (tmp == PIIX_AHCI_DEVICE) { + int rc = piix_disable_ahci(pdev); + if (rc) + return rc; + } + } + + /* Initialize SATA map */ + if (host_flags & ATA_FLAG_SATA) { + piix_init_sata_map(pdev, port_info, + piix_map_db_table[ent->driver_data]); + piix_init_pcs(pdev, piix_map_db_table[ent->driver_data]); + } + + /* On ICH5, some BIOSen disable the interrupt using the + * PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3. + * On ICH6, this bit has the same effect, but only when + * MSI is disabled (and it is disabled, as we don't use + * message-signalled interrupts currently). + */ + if (host_flags & PIIX_FLAG_CHECKINTR) + pci_intx(pdev, 1); + + if (piix_check_450nx_errata(pdev)) { + /* This writes into the master table but it does not + really matter for this errata as we will apply it to + all the PIIX devices on the board */ + port_info[0].mwdma_mask = 0; + port_info[0].udma_mask = 0; + port_info[1].mwdma_mask = 0; + port_info[1].udma_mask = 0; + } + return ata_pci_init_one(pdev, ppinfo, 2); +} + +static void piix_host_stop(struct ata_host_set *host_set) +{ + ata_host_stop(host_set); +} + +static int __init piix_init(void) +{ + int rc; + + DPRINTK("pci_register_driver\n"); + rc = pci_register_driver(&piix_pci_driver); + if (rc) + return rc; + + in_module_init = 0; + + DPRINTK("done\n"); + return 0; +} + +static void __exit piix_exit(void) +{ + pci_unregister_driver(&piix_pci_driver); +} + +module_init(piix_init); +module_exit(piix_exit); + diff --git a/drivers/ata/libata-bmdma.c b/drivers/ata/libata-bmdma.c new file mode 100644 index 00000000000..158f62dbf21 --- /dev/null +++ b/drivers/ata/libata-bmdma.c @@ -0,0 +1,1109 @@ +/* + * libata-bmdma.c - helper library for PCI IDE BMDMA + * + * Maintained by: Jeff Garzik + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003-2006 Red Hat, Inc. All rights reserved. + * Copyright 2003-2006 Jeff Garzik + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available from http://www.t13.org/ and + * http://www.sata-io.org/ + * + */ + +#include +#include +#include + +#include "libata.h" + +/** + * ata_tf_load_pio - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_tf_load_pio(struct ata_port *ap, const struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + + if (tf->ctl != ap->last_ctl) { + outb(tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + } + + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + outb(tf->hob_feature, ioaddr->feature_addr); + outb(tf->hob_nsect, ioaddr->nsect_addr); + outb(tf->hob_lbal, ioaddr->lbal_addr); + outb(tf->hob_lbam, ioaddr->lbam_addr); + outb(tf->hob_lbah, ioaddr->lbah_addr); + VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", + tf->hob_feature, + tf->hob_nsect, + tf->hob_lbal, + tf->hob_lbam, + tf->hob_lbah); + } + + if (is_addr) { + outb(tf->feature, ioaddr->feature_addr); + outb(tf->nsect, ioaddr->nsect_addr); + outb(tf->lbal, ioaddr->lbal_addr); + outb(tf->lbam, ioaddr->lbam_addr); + outb(tf->lbah, ioaddr->lbah_addr); + VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", + tf->feature, + tf->nsect, + tf->lbal, + tf->lbam, + tf->lbah); + } + + if (tf->flags & ATA_TFLAG_DEVICE) { + outb(tf->device, ioaddr->device_addr); + VPRINTK("device 0x%X\n", tf->device); + } + + ata_wait_idle(ap); +} + +/** + * ata_tf_load_mmio - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller using MMIO. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + + if (tf->ctl != ap->last_ctl) { + writeb(tf->ctl, (void __iomem *) ap->ioaddr.ctl_addr); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + } + + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + writeb(tf->hob_feature, (void __iomem *) ioaddr->feature_addr); + writeb(tf->hob_nsect, (void __iomem *) ioaddr->nsect_addr); + writeb(tf->hob_lbal, (void __iomem *) ioaddr->lbal_addr); + writeb(tf->hob_lbam, (void __iomem *) ioaddr->lbam_addr); + writeb(tf->hob_lbah, (void __iomem *) ioaddr->lbah_addr); + VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", + tf->hob_feature, + tf->hob_nsect, + tf->hob_lbal, + tf->hob_lbam, + tf->hob_lbah); + } + + if (is_addr) { + writeb(tf->feature, (void __iomem *) ioaddr->feature_addr); + writeb(tf->nsect, (void __iomem *) ioaddr->nsect_addr); + writeb(tf->lbal, (void __iomem *) ioaddr->lbal_addr); + writeb(tf->lbam, (void __iomem *) ioaddr->lbam_addr); + writeb(tf->lbah, (void __iomem *) ioaddr->lbah_addr); + VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", + tf->feature, + tf->nsect, + tf->lbal, + tf->lbam, + tf->lbah); + } + + if (tf->flags & ATA_TFLAG_DEVICE) { + writeb(tf->device, (void __iomem *) ioaddr->device_addr); + VPRINTK("device 0x%X\n", tf->device); + } + + ata_wait_idle(ap); +} + + +/** + * ata_tf_load - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller using MMIO + * or PIO as indicated by the ATA_FLAG_MMIO flag. + * Writes the control, feature, nsect, lbal, lbam, and lbah registers. + * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect, + * hob_lbal, hob_lbam, and hob_lbah. + * + * This function waits for idle (!BUSY and !DRQ) after writing + * registers. If the control register has a new value, this + * function also waits for idle after writing control and before + * writing the remaining registers. + * + * May be used as the tf_load() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) +{ + if (ap->flags & ATA_FLAG_MMIO) + ata_tf_load_mmio(ap, tf); + else + ata_tf_load_pio(ap, tf); +} + +/** + * ata_exec_command_pio - issue ATA command to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues PIO write to ATA command register, with proper + * synchronization with interrupt handler / other threads. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf) +{ + DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); + + outb(tf->command, ap->ioaddr.command_addr); + ata_pause(ap); +} + + +/** + * ata_exec_command_mmio - issue ATA command to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues MMIO write to ATA command register, with proper + * synchronization with interrupt handler / other threads. + * + * FIXME: missing write posting for 400nS delay enforcement + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) +{ + DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); + + writeb(tf->command, (void __iomem *) ap->ioaddr.command_addr); + ata_pause(ap); +} + + +/** + * ata_exec_command - issue ATA command to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues PIO/MMIO write to ATA command register, with proper + * synchronization with interrupt handler / other threads. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) +{ + if (ap->flags & ATA_FLAG_MMIO) + ata_exec_command_mmio(ap, tf); + else + ata_exec_command_pio(ap, tf); +} + +/** + * ata_tf_read_pio - input device's ATA taskfile shadow registers + * @ap: Port from which input is read + * @tf: ATA taskfile register set for storing input + * + * Reads ATA taskfile registers for currently-selected device + * into @tf. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_tf_read_pio(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + tf->command = ata_check_status(ap); + tf->feature = inb(ioaddr->error_addr); + tf->nsect = inb(ioaddr->nsect_addr); + tf->lbal = inb(ioaddr->lbal_addr); + tf->lbam = inb(ioaddr->lbam_addr); + tf->lbah = inb(ioaddr->lbah_addr); + tf->device = inb(ioaddr->device_addr); + + if (tf->flags & ATA_TFLAG_LBA48) { + outb(tf->ctl | ATA_HOB, ioaddr->ctl_addr); + tf->hob_feature = inb(ioaddr->error_addr); + tf->hob_nsect = inb(ioaddr->nsect_addr); + tf->hob_lbal = inb(ioaddr->lbal_addr); + tf->hob_lbam = inb(ioaddr->lbam_addr); + tf->hob_lbah = inb(ioaddr->lbah_addr); + } +} + +/** + * ata_tf_read_mmio - input device's ATA taskfile shadow registers + * @ap: Port from which input is read + * @tf: ATA taskfile register set for storing input + * + * Reads ATA taskfile registers for currently-selected device + * into @tf via MMIO. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + tf->command = ata_check_status(ap); + tf->feature = readb((void __iomem *)ioaddr->error_addr); + tf->nsect = readb((void __iomem *)ioaddr->nsect_addr); + tf->lbal = readb((void __iomem *)ioaddr->lbal_addr); + tf->lbam = readb((void __iomem *)ioaddr->lbam_addr); + tf->lbah = readb((void __iomem *)ioaddr->lbah_addr); + tf->device = readb((void __iomem *)ioaddr->device_addr); + + if (tf->flags & ATA_TFLAG_LBA48) { + writeb(tf->ctl | ATA_HOB, (void __iomem *) ap->ioaddr.ctl_addr); + tf->hob_feature = readb((void __iomem *)ioaddr->error_addr); + tf->hob_nsect = readb((void __iomem *)ioaddr->nsect_addr); + tf->hob_lbal = readb((void __iomem *)ioaddr->lbal_addr); + tf->hob_lbam = readb((void __iomem *)ioaddr->lbam_addr); + tf->hob_lbah = readb((void __iomem *)ioaddr->lbah_addr); + } +} + + +/** + * ata_tf_read - input device's ATA taskfile shadow registers + * @ap: Port from which input is read + * @tf: ATA taskfile register set for storing input + * + * Reads ATA taskfile registers for currently-selected device + * into @tf. + * + * Reads nsect, lbal, lbam, lbah, and device. If ATA_TFLAG_LBA48 + * is set, also reads the hob registers. + * + * May be used as the tf_read() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + if (ap->flags & ATA_FLAG_MMIO) + ata_tf_read_mmio(ap, tf); + else + ata_tf_read_pio(ap, tf); +} + +/** + * ata_check_status_pio - Read device status reg & clear interrupt + * @ap: port where the device is + * + * Reads ATA taskfile status register for currently-selected device + * and return its value. This also clears pending interrupts + * from this device + * + * LOCKING: + * Inherited from caller. + */ +static u8 ata_check_status_pio(struct ata_port *ap) +{ + return inb(ap->ioaddr.status_addr); +} + +/** + * ata_check_status_mmio - Read device status reg & clear interrupt + * @ap: port where the device is + * + * Reads ATA taskfile status register for currently-selected device + * via MMIO and return its value. This also clears pending interrupts + * from this device + * + * LOCKING: + * Inherited from caller. + */ +static u8 ata_check_status_mmio(struct ata_port *ap) +{ + return readb((void __iomem *) ap->ioaddr.status_addr); +} + + +/** + * ata_check_status - Read device status reg & clear interrupt + * @ap: port where the device is + * + * Reads ATA taskfile status register for currently-selected device + * and return its value. This also clears pending interrupts + * from this device + * + * May be used as the check_status() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +u8 ata_check_status(struct ata_port *ap) +{ + if (ap->flags & ATA_FLAG_MMIO) + return ata_check_status_mmio(ap); + return ata_check_status_pio(ap); +} + + +/** + * ata_altstatus - Read device alternate status reg + * @ap: port where the device is + * + * Reads ATA taskfile alternate status register for + * currently-selected device and return its value. + * + * Note: may NOT be used as the check_altstatus() entry in + * ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +u8 ata_altstatus(struct ata_port *ap) +{ + if (ap->ops->check_altstatus) + return ap->ops->check_altstatus(ap); + + if (ap->flags & ATA_FLAG_MMIO) + return readb((void __iomem *)ap->ioaddr.altstatus_addr); + return inb(ap->ioaddr.altstatus_addr); +} + +/** + * ata_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction + * @qc: Info associated with this ATA transaction. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +static void ata_bmdma_setup_mmio (struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); + u8 dmactl; + void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; + + /* load PRD table addr. */ + mb(); /* make sure PRD table writes are visible to controller */ + writel(ap->prd_dma, mmio + ATA_DMA_TABLE_OFS); + + /* specify data direction, triple-check start bit is clear */ + dmactl = readb(mmio + ATA_DMA_CMD); + dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); + if (!rw) + dmactl |= ATA_DMA_WR; + writeb(dmactl, mmio + ATA_DMA_CMD); + + /* issue r/w command */ + ap->ops->exec_command(ap, &qc->tf); +} + +/** + * ata_bmdma_start_mmio - Start a PCI IDE BMDMA transaction + * @qc: Info associated with this ATA transaction. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +static void ata_bmdma_start_mmio (struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; + u8 dmactl; + + /* start host DMA transaction */ + dmactl = readb(mmio + ATA_DMA_CMD); + writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD); + + /* Strictly, one may wish to issue a readb() here, to + * flush the mmio write. However, control also passes + * to the hardware at this point, and it will interrupt + * us when we are to resume control. So, in effect, + * we don't care when the mmio write flushes. + * Further, a read of the DMA status register _immediately_ + * following the write may not be what certain flaky hardware + * is expected, so I think it is best to not add a readb() + * without first all the MMIO ATA cards/mobos. + * Or maybe I'm just being paranoid. + */ +} + +/** + * ata_bmdma_setup_pio - Set up PCI IDE BMDMA transaction (PIO) + * @qc: Info associated with this ATA transaction. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +static void ata_bmdma_setup_pio (struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); + u8 dmactl; + + /* load PRD table addr. */ + outl(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS); + + /* specify data direction, triple-check start bit is clear */ + dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); + if (!rw) + dmactl |= ATA_DMA_WR; + outb(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + + /* issue r/w command */ + ap->ops->exec_command(ap, &qc->tf); +} + +/** + * ata_bmdma_start_pio - Start a PCI IDE BMDMA transaction (PIO) + * @qc: Info associated with this ATA transaction. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +static void ata_bmdma_start_pio (struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + u8 dmactl; + + /* start host DMA transaction */ + dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + outb(dmactl | ATA_DMA_START, + ap->ioaddr.bmdma_addr + ATA_DMA_CMD); +} + + +/** + * ata_bmdma_start - Start a PCI IDE BMDMA transaction + * @qc: Info associated with this ATA transaction. + * + * Writes the ATA_DMA_START flag to the DMA command register. + * + * May be used as the bmdma_start() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +void ata_bmdma_start(struct ata_queued_cmd *qc) +{ + if (qc->ap->flags & ATA_FLAG_MMIO) + ata_bmdma_start_mmio(qc); + else + ata_bmdma_start_pio(qc); +} + + +/** + * ata_bmdma_setup - Set up PCI IDE BMDMA transaction + * @qc: Info associated with this ATA transaction. + * + * Writes address of PRD table to device's PRD Table Address + * register, sets the DMA control register, and calls + * ops->exec_command() to start the transfer. + * + * May be used as the bmdma_setup() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +void ata_bmdma_setup(struct ata_queued_cmd *qc) +{ + if (qc->ap->flags & ATA_FLAG_MMIO) + ata_bmdma_setup_mmio(qc); + else + ata_bmdma_setup_pio(qc); +} + + +/** + * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt. + * @ap: Port associated with this ATA transaction. + * + * Clear interrupt and error flags in DMA status register. + * + * May be used as the irq_clear() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +void ata_bmdma_irq_clear(struct ata_port *ap) +{ + if (!ap->ioaddr.bmdma_addr) + return; + + if (ap->flags & ATA_FLAG_MMIO) { + void __iomem *mmio = + ((void __iomem *) ap->ioaddr.bmdma_addr) + ATA_DMA_STATUS; + writeb(readb(mmio), mmio); + } else { + unsigned long addr = ap->ioaddr.bmdma_addr + ATA_DMA_STATUS; + outb(inb(addr), addr); + } +} + + +/** + * ata_bmdma_status - Read PCI IDE BMDMA status + * @ap: Port associated with this ATA transaction. + * + * Read and return BMDMA status register. + * + * May be used as the bmdma_status() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +u8 ata_bmdma_status(struct ata_port *ap) +{ + u8 host_stat; + if (ap->flags & ATA_FLAG_MMIO) { + void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; + host_stat = readb(mmio + ATA_DMA_STATUS); + } else + host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + return host_stat; +} + + +/** + * ata_bmdma_stop - Stop PCI IDE BMDMA transfer + * @qc: Command we are ending DMA for + * + * Clears the ATA_DMA_START flag in the dma control register + * + * May be used as the bmdma_stop() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +void ata_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + if (ap->flags & ATA_FLAG_MMIO) { + void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; + + /* clear start/stop bit */ + writeb(readb(mmio + ATA_DMA_CMD) & ~ATA_DMA_START, + mmio + ATA_DMA_CMD); + } else { + /* clear start/stop bit */ + outb(inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD) & ~ATA_DMA_START, + ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + } + + /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ + ata_altstatus(ap); /* dummy read */ +} + +/** + * ata_bmdma_freeze - Freeze BMDMA controller port + * @ap: port to freeze + * + * Freeze BMDMA controller port. + * + * LOCKING: + * Inherited from caller. + */ +void ata_bmdma_freeze(struct ata_port *ap) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + ap->ctl |= ATA_NIEN; + ap->last_ctl = ap->ctl; + + if (ap->flags & ATA_FLAG_MMIO) + writeb(ap->ctl, (void __iomem *)ioaddr->ctl_addr); + else + outb(ap->ctl, ioaddr->ctl_addr); +} + +/** + * ata_bmdma_thaw - Thaw BMDMA controller port + * @ap: port to thaw + * + * Thaw BMDMA controller port. + * + * LOCKING: + * Inherited from caller. + */ +void ata_bmdma_thaw(struct ata_port *ap) +{ + /* clear & re-enable interrupts */ + ata_chk_status(ap); + ap->ops->irq_clear(ap); + if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */ + ata_irq_on(ap); +} + +/** + * ata_bmdma_drive_eh - Perform EH with given methods for BMDMA controller + * @ap: port to handle error for + * @prereset: prereset method (can be NULL) + * @softreset: softreset method (can be NULL) + * @hardreset: hardreset method (can be NULL) + * @postreset: postreset method (can be NULL) + * + * Handle error for ATA BMDMA controller. It can handle both + * PATA and SATA controllers. Many controllers should be able to + * use this EH as-is or with some added handling before and + * after. + * + * This function is intended to be used for constructing + * ->error_handler callback by low level drivers. + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset, + ata_reset_fn_t softreset, ata_reset_fn_t hardreset, + ata_postreset_fn_t postreset) +{ + struct ata_eh_context *ehc = &ap->eh_context; + struct ata_queued_cmd *qc; + unsigned long flags; + int thaw = 0; + + qc = __ata_qc_from_tag(ap, ap->active_tag); + if (qc && !(qc->flags & ATA_QCFLAG_FAILED)) + qc = NULL; + + /* reset PIO HSM and stop DMA engine */ + spin_lock_irqsave(ap->lock, flags); + + ap->hsm_task_state = HSM_ST_IDLE; + + if (qc && (qc->tf.protocol == ATA_PROT_DMA || + qc->tf.protocol == ATA_PROT_ATAPI_DMA)) { + u8 host_stat; + + host_stat = ata_bmdma_status(ap); + + ata_ehi_push_desc(&ehc->i, "BMDMA stat 0x%x", host_stat); + + /* BMDMA controllers indicate host bus error by + * setting DMA_ERR bit and timing out. As it wasn't + * really a timeout event, adjust error mask and + * cancel frozen state. + */ + if (qc->err_mask == AC_ERR_TIMEOUT && host_stat & ATA_DMA_ERR) { + qc->err_mask = AC_ERR_HOST_BUS; + thaw = 1; + } + + ap->ops->bmdma_stop(qc); + } + + ata_altstatus(ap); + ata_chk_status(ap); + ap->ops->irq_clear(ap); + + spin_unlock_irqrestore(ap->lock, flags); + + if (thaw) + ata_eh_thaw_port(ap); + + /* PIO and DMA engines have been stopped, perform recovery */ + ata_do_eh(ap, prereset, softreset, hardreset, postreset); +} + +/** + * ata_bmdma_error_handler - Stock error handler for BMDMA controller + * @ap: port to handle error for + * + * Stock error handler for BMDMA controller. + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_bmdma_error_handler(struct ata_port *ap) +{ + ata_reset_fn_t hardreset; + + hardreset = NULL; + if (sata_scr_valid(ap)) + hardreset = sata_std_hardreset; + + ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, hardreset, + ata_std_postreset); +} + +/** + * ata_bmdma_post_internal_cmd - Stock post_internal_cmd for + * BMDMA controller + * @qc: internal command to clean up + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc) +{ + ata_bmdma_stop(qc); +} + +#ifdef CONFIG_PCI +/** + * ata_pci_init_native_mode - Initialize native-mode driver + * @pdev: pci device to be initialized + * @port: array[2] of pointers to port info structures. + * @ports: bitmap of ports present + * + * Utility function which allocates and initializes an + * ata_probe_ent structure for a standard dual-port + * PIO-based IDE controller. The returned ata_probe_ent + * structure can be passed to ata_device_add(). The returned + * ata_probe_ent structure should then be freed with kfree(). + * + * The caller need only pass the address of the primary port, the + * secondary will be deduced automatically. If the device has non + * standard secondary port mappings this function can be called twice, + * once for each interface. + */ + +struct ata_probe_ent * +ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports) +{ + struct ata_probe_ent *probe_ent = + ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); + int p = 0; + unsigned long bmdma; + + if (!probe_ent) + return NULL; + + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = IRQF_SHARED; + probe_ent->private_data = port[0]->private_data; + + if (ports & ATA_PORT_PRIMARY) { + probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 0); + probe_ent->port[p].altstatus_addr = + probe_ent->port[p].ctl_addr = + pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS; + bmdma = pci_resource_start(pdev, 4); + if (bmdma) { + if (inb(bmdma + 2) & 0x80) + probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; + probe_ent->port[p].bmdma_addr = bmdma; + } + ata_std_ports(&probe_ent->port[p]); + p++; + } + + if (ports & ATA_PORT_SECONDARY) { + probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 2); + probe_ent->port[p].altstatus_addr = + probe_ent->port[p].ctl_addr = + pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS; + bmdma = pci_resource_start(pdev, 4); + if (bmdma) { + bmdma += 8; + if(inb(bmdma + 2) & 0x80) + probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; + probe_ent->port[p].bmdma_addr = bmdma; + } + ata_std_ports(&probe_ent->port[p]); + p++; + } + + probe_ent->n_ports = p; + return probe_ent; +} + + +static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, + struct ata_port_info **port, int port_mask) +{ + struct ata_probe_ent *probe_ent; + unsigned long bmdma = pci_resource_start(pdev, 4); + + probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); + if (!probe_ent) + return NULL; + + probe_ent->n_ports = 2; + probe_ent->private_data = port[0]->private_data; + + if (port_mask & ATA_PORT_PRIMARY) { + probe_ent->irq = 14; + probe_ent->port[0].cmd_addr = ATA_PRIMARY_CMD; + probe_ent->port[0].altstatus_addr = + probe_ent->port[0].ctl_addr = ATA_PRIMARY_CTL; + if (bmdma) { + probe_ent->port[0].bmdma_addr = bmdma; + if (inb(bmdma + 2) & 0x80) + probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; + } + ata_std_ports(&probe_ent->port[0]); + } else + probe_ent->dummy_port_mask |= ATA_PORT_PRIMARY; + + if (port_mask & ATA_PORT_SECONDARY) { + if (probe_ent->irq) + probe_ent->irq2 = 15; + else + probe_ent->irq = 15; + probe_ent->port[1].cmd_addr = ATA_SECONDARY_CMD; + probe_ent->port[1].altstatus_addr = + probe_ent->port[1].ctl_addr = ATA_SECONDARY_CTL; + if (bmdma) { + probe_ent->port[1].bmdma_addr = bmdma + 8; + if (inb(bmdma + 10) & 0x80) + probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; + } + ata_std_ports(&probe_ent->port[1]); + } else + probe_ent->dummy_port_mask |= ATA_PORT_SECONDARY; + + return probe_ent; +} + + +/** + * ata_pci_init_one - Initialize/register PCI IDE host controller + * @pdev: Controller to be initialized + * @port_info: Information from low-level host driver + * @n_ports: Number of ports attached to host controller + * + * This is a helper function which can be called from a driver's + * xxx_init_one() probe function if the hardware uses traditional + * IDE taskfile registers. + * + * This function calls pci_enable_device(), reserves its register + * regions, sets the dma mask, enables bus master mode, and calls + * ata_device_add() + * + * ASSUMPTION: + * Nobody makes a single channel controller that appears solely as + * the secondary legacy port on PCI. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, negative on errno-based value on error. + */ + +int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, + unsigned int n_ports) +{ + struct ata_probe_ent *probe_ent = NULL; + struct ata_port_info *port[2]; + u8 tmp8, mask; + unsigned int legacy_mode = 0; + int disable_dev_on_err = 1; + int rc; + + DPRINTK("ENTER\n"); + + port[0] = port_info[0]; + if (n_ports > 1) + port[1] = port_info[1]; + else + port[1] = port[0]; + + if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0 + && (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { + /* TODO: What if one channel is in native mode ... */ + pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); + mask = (1 << 2) | (1 << 0); + if ((tmp8 & mask) != mask) + legacy_mode = (1 << 3); + } + + /* FIXME... */ + if ((!legacy_mode) && (n_ports > 2)) { + printk(KERN_ERR "ata: BUG: native mode, n_ports > 2\n"); + n_ports = 2; + /* For now */ + } + + /* FIXME: Really for ATA it isn't safe because the device may be + multi-purpose and we want to leave it alone if it was already + enabled. Secondly for shared use as Arjan says we want refcounting + + Checking dev->is_enabled is insufficient as this is not set at + boot for the primary video which is BIOS enabled + */ + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) { + disable_dev_on_err = 0; + goto err_out; + } + + if (legacy_mode) { + if (!request_region(ATA_PRIMARY_CMD, 8, "libata")) { + struct resource *conflict, res; + res.start = ATA_PRIMARY_CMD; + res.end = ATA_PRIMARY_CMD + 8 - 1; + conflict = ____request_resource(&ioport_resource, &res); + if (!strcmp(conflict->name, "libata")) + legacy_mode |= ATA_PORT_PRIMARY; + else { + disable_dev_on_err = 0; + printk(KERN_WARNING "ata: 0x%0X IDE port busy\n", ATA_PRIMARY_CMD); + } + } else + legacy_mode |= ATA_PORT_PRIMARY; + + if (!request_region(ATA_SECONDARY_CMD, 8, "libata")) { + struct resource *conflict, res; + res.start = ATA_SECONDARY_CMD; + res.end = ATA_SECONDARY_CMD + 8 - 1; + conflict = ____request_resource(&ioport_resource, &res); + if (!strcmp(conflict->name, "libata")) + legacy_mode |= ATA_PORT_SECONDARY; + else { + disable_dev_on_err = 0; + printk(KERN_WARNING "ata: 0x%X IDE port busy\n", ATA_SECONDARY_CMD); + } + } else + legacy_mode |= ATA_PORT_SECONDARY; + } + + /* we have legacy mode, but all ports are unavailable */ + if (legacy_mode == (1 << 3)) { + rc = -EBUSY; + goto err_out_regions; + } + + /* FIXME: If we get no DMA mask we should fall back to PIO */ + rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + + if (legacy_mode) { + probe_ent = ata_pci_init_legacy_port(pdev, port, legacy_mode); + } else { + if (n_ports == 2) + probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); + else + probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY); + } + if (!probe_ent) { + rc = -ENOMEM; + goto err_out_regions; + } + + pci_set_master(pdev); + + /* FIXME: check ata_device_add return */ + ata_device_add(probe_ent); + + kfree(probe_ent); + + return 0; + +err_out_regions: + if (legacy_mode & ATA_PORT_PRIMARY) + release_region(ATA_PRIMARY_CMD, 8); + if (legacy_mode & ATA_PORT_SECONDARY) + release_region(ATA_SECONDARY_CMD, 8); + pci_release_regions(pdev); +err_out: + if (disable_dev_on_err) + pci_disable_device(pdev); + return rc; +} + +/** + * ata_pci_clear_simplex - attempt to kick device out of simplex + * @pdev: PCI device + * + * Some PCI ATA devices report simplex mode but in fact can be told to + * enter non simplex mode. This implements the neccessary logic to + * perform the task on such devices. Calling it on other devices will + * have -undefined- behaviour. + */ + +int ata_pci_clear_simplex(struct pci_dev *pdev) +{ + unsigned long bmdma = pci_resource_start(pdev, 4); + u8 simplex; + + if (bmdma == 0) + return -ENOENT; + + simplex = inb(bmdma + 0x02); + outb(simplex & 0x60, bmdma + 0x02); + simplex = inb(bmdma + 0x02); + if (simplex & 0x80) + return -EOPNOTSUPP; + return 0; +} + +unsigned long ata_pci_default_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long xfer_mask) +{ + /* Filter out DMA modes if the device has been configured by + the BIOS as PIO only */ + + if (ap->ioaddr.bmdma_addr == 0) + xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + return xfer_mask; +} + +#endif /* CONFIG_PCI */ + diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c new file mode 100644 index 00000000000..7d786fba4d8 --- /dev/null +++ b/drivers/ata/libata-core.c @@ -0,0 +1,6097 @@ +/* + * libata-core.c - helper library for ATA + * + * Maintained by: Jeff Garzik + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003-2004 Red Hat, Inc. All rights reserved. + * Copyright 2003-2004 Jeff Garzik + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available from http://www.t13.org/ and + * http://www.sata-io.org/ + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "libata.h" + +/* debounce timing parameters in msecs { interval, duration, timeout } */ +const unsigned long sata_deb_timing_normal[] = { 5, 100, 2000 }; +const unsigned long sata_deb_timing_hotplug[] = { 25, 500, 2000 }; +const unsigned long sata_deb_timing_long[] = { 100, 2000, 5000 }; + +static unsigned int ata_dev_init_params(struct ata_device *dev, + u16 heads, u16 sectors); +static unsigned int ata_dev_set_xfermode(struct ata_device *dev); +static void ata_dev_xfermask(struct ata_device *dev); + +static unsigned int ata_unique_id = 1; +static struct workqueue_struct *ata_wq; + +struct workqueue_struct *ata_aux_wq; + +int atapi_enabled = 1; +module_param(atapi_enabled, int, 0444); +MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)"); + +int atapi_dmadir = 0; +module_param(atapi_dmadir, int, 0444); +MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off, 1=on)"); + +int libata_fua = 0; +module_param_named(fua, libata_fua, int, 0444); +MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)"); + +static int ata_probe_timeout = ATA_TMOUT_INTERNAL / HZ; +module_param(ata_probe_timeout, int, 0444); +MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)"); + +MODULE_AUTHOR("Jeff Garzik"); +MODULE_DESCRIPTION("Library module for ATA devices"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + + +/** + * ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure + * @tf: Taskfile to convert + * @fis: Buffer into which data will output + * @pmp: Port multiplier port + * + * Converts a standard ATA taskfile to a Serial ATA + * FIS structure (Register - Host to Device). + * + * LOCKING: + * Inherited from caller. + */ + +void ata_tf_to_fis(const struct ata_taskfile *tf, u8 *fis, u8 pmp) +{ + fis[0] = 0x27; /* Register - Host to Device FIS */ + fis[1] = (pmp & 0xf) | (1 << 7); /* Port multiplier number, + bit 7 indicates Command FIS */ + fis[2] = tf->command; + fis[3] = tf->feature; + + fis[4] = tf->lbal; + fis[5] = tf->lbam; + fis[6] = tf->lbah; + fis[7] = tf->device; + + fis[8] = tf->hob_lbal; + fis[9] = tf->hob_lbam; + fis[10] = tf->hob_lbah; + fis[11] = tf->hob_feature; + + fis[12] = tf->nsect; + fis[13] = tf->hob_nsect; + fis[14] = 0; + fis[15] = tf->ctl; + + fis[16] = 0; + fis[17] = 0; + fis[18] = 0; + fis[19] = 0; +} + +/** + * ata_tf_from_fis - Convert SATA FIS to ATA taskfile + * @fis: Buffer from which data will be input + * @tf: Taskfile to output + * + * Converts a serial ATA FIS structure to a standard ATA taskfile. + * + * LOCKING: + * Inherited from caller. + */ + +void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf) +{ + tf->command = fis[2]; /* status */ + tf->feature = fis[3]; /* error */ + + tf->lbal = fis[4]; + tf->lbam = fis[5]; + tf->lbah = fis[6]; + tf->device = fis[7]; + + tf->hob_lbal = fis[8]; + tf->hob_lbam = fis[9]; + tf->hob_lbah = fis[10]; + + tf->nsect = fis[12]; + tf->hob_nsect = fis[13]; +} + +static const u8 ata_rw_cmds[] = { + /* pio multi */ + ATA_CMD_READ_MULTI, + ATA_CMD_WRITE_MULTI, + ATA_CMD_READ_MULTI_EXT, + ATA_CMD_WRITE_MULTI_EXT, + 0, + 0, + 0, + ATA_CMD_WRITE_MULTI_FUA_EXT, + /* pio */ + ATA_CMD_PIO_READ, + ATA_CMD_PIO_WRITE, + ATA_CMD_PIO_READ_EXT, + ATA_CMD_PIO_WRITE_EXT, + 0, + 0, + 0, + 0, + /* dma */ + ATA_CMD_READ, + ATA_CMD_WRITE, + ATA_CMD_READ_EXT, + ATA_CMD_WRITE_EXT, + 0, + 0, + 0, + ATA_CMD_WRITE_FUA_EXT +}; + +/** + * ata_rwcmd_protocol - set taskfile r/w commands and protocol + * @qc: command to examine and configure + * + * Examine the device configuration and tf->flags to calculate + * the proper read/write commands and protocol to use. + * + * LOCKING: + * caller. + */ +int ata_rwcmd_protocol(struct ata_queued_cmd *qc) +{ + struct ata_taskfile *tf = &qc->tf; + struct ata_device *dev = qc->dev; + u8 cmd; + + int index, fua, lba48, write; + + fua = (tf->flags & ATA_TFLAG_FUA) ? 4 : 0; + lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0; + write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0; + + if (dev->flags & ATA_DFLAG_PIO) { + tf->protocol = ATA_PROT_PIO; + index = dev->multi_count ? 0 : 8; + } else if (lba48 && (qc->ap->flags & ATA_FLAG_PIO_LBA48)) { + /* Unable to use DMA due to host limitation */ + tf->protocol = ATA_PROT_PIO; + index = dev->multi_count ? 0 : 8; + } else { + tf->protocol = ATA_PROT_DMA; + index = 16; + } + + cmd = ata_rw_cmds[index + fua + lba48 + write]; + if (cmd) { + tf->command = cmd; + return 0; + } + return -1; +} + +/** + * ata_pack_xfermask - Pack pio, mwdma and udma masks into xfer_mask + * @pio_mask: pio_mask + * @mwdma_mask: mwdma_mask + * @udma_mask: udma_mask + * + * Pack @pio_mask, @mwdma_mask and @udma_mask into a single + * unsigned int xfer_mask. + * + * LOCKING: + * None. + * + * RETURNS: + * Packed xfer_mask. + */ +static unsigned int ata_pack_xfermask(unsigned int pio_mask, + unsigned int mwdma_mask, + unsigned int udma_mask) +{ + return ((pio_mask << ATA_SHIFT_PIO) & ATA_MASK_PIO) | + ((mwdma_mask << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA) | + ((udma_mask << ATA_SHIFT_UDMA) & ATA_MASK_UDMA); +} + +/** + * ata_unpack_xfermask - Unpack xfer_mask into pio, mwdma and udma masks + * @xfer_mask: xfer_mask to unpack + * @pio_mask: resulting pio_mask + * @mwdma_mask: resulting mwdma_mask + * @udma_mask: resulting udma_mask + * + * Unpack @xfer_mask into @pio_mask, @mwdma_mask and @udma_mask. + * Any NULL distination masks will be ignored. + */ +static void ata_unpack_xfermask(unsigned int xfer_mask, + unsigned int *pio_mask, + unsigned int *mwdma_mask, + unsigned int *udma_mask) +{ + if (pio_mask) + *pio_mask = (xfer_mask & ATA_MASK_PIO) >> ATA_SHIFT_PIO; + if (mwdma_mask) + *mwdma_mask = (xfer_mask & ATA_MASK_MWDMA) >> ATA_SHIFT_MWDMA; + if (udma_mask) + *udma_mask = (xfer_mask & ATA_MASK_UDMA) >> ATA_SHIFT_UDMA; +} + +static const struct ata_xfer_ent { + int shift, bits; + u8 base; +} ata_xfer_tbl[] = { + { ATA_SHIFT_PIO, ATA_BITS_PIO, XFER_PIO_0 }, + { ATA_SHIFT_MWDMA, ATA_BITS_MWDMA, XFER_MW_DMA_0 }, + { ATA_SHIFT_UDMA, ATA_BITS_UDMA, XFER_UDMA_0 }, + { -1, }, +}; + +/** + * ata_xfer_mask2mode - Find matching XFER_* for the given xfer_mask + * @xfer_mask: xfer_mask of interest + * + * Return matching XFER_* value for @xfer_mask. Only the highest + * bit of @xfer_mask is considered. + * + * LOCKING: + * None. + * + * RETURNS: + * Matching XFER_* value, 0 if no match found. + */ +static u8 ata_xfer_mask2mode(unsigned int xfer_mask) +{ + int highbit = fls(xfer_mask) - 1; + const struct ata_xfer_ent *ent; + + for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) + if (highbit >= ent->shift && highbit < ent->shift + ent->bits) + return ent->base + highbit - ent->shift; + return 0; +} + +/** + * ata_xfer_mode2mask - Find matching xfer_mask for XFER_* + * @xfer_mode: XFER_* of interest + * + * Return matching xfer_mask for @xfer_mode. + * + * LOCKING: + * None. + * + * RETURNS: + * Matching xfer_mask, 0 if no match found. + */ +static unsigned int ata_xfer_mode2mask(u8 xfer_mode) +{ + const struct ata_xfer_ent *ent; + + for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) + if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) + return 1 << (ent->shift + xfer_mode - ent->base); + return 0; +} + +/** + * ata_xfer_mode2shift - Find matching xfer_shift for XFER_* + * @xfer_mode: XFER_* of interest + * + * Return matching xfer_shift for @xfer_mode. + * + * LOCKING: + * None. + * + * RETURNS: + * Matching xfer_shift, -1 if no match found. + */ +static int ata_xfer_mode2shift(unsigned int xfer_mode) +{ + const struct ata_xfer_ent *ent; + + for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) + if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) + return ent->shift; + return -1; +} + +/** + * ata_mode_string - convert xfer_mask to string + * @xfer_mask: mask of bits supported; only highest bit counts. + * + * Determine string which represents the highest speed + * (highest bit in @modemask). + * + * LOCKING: + * None. + * + * RETURNS: + * Constant C string representing highest speed listed in + * @mode_mask, or the constant C string "". + */ +static const char *ata_mode_string(unsigned int xfer_mask) +{ + static const char * const xfer_mode_str[] = { + "PIO0", + "PIO1", + "PIO2", + "PIO3", + "PIO4", + "MWDMA0", + "MWDMA1", + "MWDMA2", + "UDMA/16", + "UDMA/25", + "UDMA/33", + "UDMA/44", + "UDMA/66", + "UDMA/100", + "UDMA/133", + "UDMA7", + }; + int highbit; + + highbit = fls(xfer_mask) - 1; + if (highbit >= 0 && highbit < ARRAY_SIZE(xfer_mode_str)) + return xfer_mode_str[highbit]; + return ""; +} + +static const char *sata_spd_string(unsigned int spd) +{ + static const char * const spd_str[] = { + "1.5 Gbps", + "3.0 Gbps", + }; + + if (spd == 0 || (spd - 1) >= ARRAY_SIZE(spd_str)) + return ""; + return spd_str[spd - 1]; +} + +void ata_dev_disable(struct ata_device *dev) +{ + if (ata_dev_enabled(dev) && ata_msg_drv(dev->ap)) { + ata_dev_printk(dev, KERN_WARNING, "disabled\n"); + dev->class++; + } +} + +/** + * ata_pio_devchk - PATA device presence detection + * @ap: ATA channel to examine + * @device: Device to examine (starting at zero) + * + * This technique was originally described in + * Hale Landis's ATADRVR (www.ata-atapi.com), and + * later found its way into the ATA/ATAPI spec. + * + * Write a pattern to the ATA shadow registers, + * and if a device is present, it will respond by + * correctly storing and echoing back the + * ATA shadow register contents. + * + * LOCKING: + * caller. + */ + +static unsigned int ata_pio_devchk(struct ata_port *ap, + unsigned int device) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + u8 nsect, lbal; + + ap->ops->dev_select(ap, device); + + outb(0x55, ioaddr->nsect_addr); + outb(0xaa, ioaddr->lbal_addr); + + outb(0xaa, ioaddr->nsect_addr); + outb(0x55, ioaddr->lbal_addr); + + outb(0x55, ioaddr->nsect_addr); + outb(0xaa, ioaddr->lbal_addr); + + nsect = inb(ioaddr->nsect_addr); + lbal = inb(ioaddr->lbal_addr); + + if ((nsect == 0x55) && (lbal == 0xaa)) + return 1; /* we found a device */ + + return 0; /* nothing found */ +} + +/** + * ata_mmio_devchk - PATA device presence detection + * @ap: ATA channel to examine + * @device: Device to examine (starting at zero) + * + * This technique was originally described in + * Hale Landis's ATADRVR (www.ata-atapi.com), and + * later found its way into the ATA/ATAPI spec. + * + * Write a pattern to the ATA shadow registers, + * and if a device is present, it will respond by + * correctly storing and echoing back the + * ATA shadow register contents. + * + * LOCKING: + * caller. + */ + +static unsigned int ata_mmio_devchk(struct ata_port *ap, + unsigned int device) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + u8 nsect, lbal; + + ap->ops->dev_select(ap, device); + + writeb(0x55, (void __iomem *) ioaddr->nsect_addr); + writeb(0xaa, (void __iomem *) ioaddr->lbal_addr); + + writeb(0xaa, (void __iomem *) ioaddr->nsect_addr); + writeb(0x55, (void __iomem *) ioaddr->lbal_addr); + + writeb(0x55, (void __iomem *) ioaddr->nsect_addr); + writeb(0xaa, (void __iomem *) ioaddr->lbal_addr); + + nsect = readb((void __iomem *) ioaddr->nsect_addr); + lbal = readb((void __iomem *) ioaddr->lbal_addr); + + if ((nsect == 0x55) && (lbal == 0xaa)) + return 1; /* we found a device */ + + return 0; /* nothing found */ +} + +/** + * ata_devchk - PATA device presence detection + * @ap: ATA channel to examine + * @device: Device to examine (starting at zero) + * + * Dispatch ATA device presence detection, depending + * on whether we are using PIO or MMIO to talk to the + * ATA shadow registers. + * + * LOCKING: + * caller. + */ + +static unsigned int ata_devchk(struct ata_port *ap, + unsigned int device) +{ + if (ap->flags & ATA_FLAG_MMIO) + return ata_mmio_devchk(ap, device); + return ata_pio_devchk(ap, device); +} + +/** + * ata_dev_classify - determine device type based on ATA-spec signature + * @tf: ATA taskfile register set for device to be identified + * + * Determine from taskfile register contents whether a device is + * ATA or ATAPI, as per "Signature and persistence" section + * of ATA/PI spec (volume 1, sect 5.14). + * + * LOCKING: + * None. + * + * RETURNS: + * Device type, %ATA_DEV_ATA, %ATA_DEV_ATAPI, or %ATA_DEV_UNKNOWN + * the event of failure. + */ + +unsigned int ata_dev_classify(const struct ata_taskfile *tf) +{ + /* Apple's open source Darwin code hints that some devices only + * put a proper signature into the LBA mid/high registers, + * So, we only check those. It's sufficient for uniqueness. + */ + + if (((tf->lbam == 0) && (tf->lbah == 0)) || + ((tf->lbam == 0x3c) && (tf->lbah == 0xc3))) { + DPRINTK("found ATA device by sig\n"); + return ATA_DEV_ATA; + } + + if (((tf->lbam == 0x14) && (tf->lbah == 0xeb)) || + ((tf->lbam == 0x69) && (tf->lbah == 0x96))) { + DPRINTK("found ATAPI device by sig\n"); + return ATA_DEV_ATAPI; + } + + DPRINTK("unknown device\n"); + return ATA_DEV_UNKNOWN; +} + +/** + * ata_dev_try_classify - Parse returned ATA device signature + * @ap: ATA channel to examine + * @device: Device to examine (starting at zero) + * @r_err: Value of error register on completion + * + * After an event -- SRST, E.D.D., or SATA COMRESET -- occurs, + * an ATA/ATAPI-defined set of values is placed in the ATA + * shadow registers, indicating the results of device detection + * and diagnostics. + * + * Select the ATA device, and read the values from the ATA shadow + * registers. Then parse according to the Error register value, + * and the spec-defined values examined by ata_dev_classify(). + * + * LOCKING: + * caller. + * + * RETURNS: + * Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE. + */ + +static unsigned int +ata_dev_try_classify(struct ata_port *ap, unsigned int device, u8 *r_err) +{ + struct ata_taskfile tf; + unsigned int class; + u8 err; + + ap->ops->dev_select(ap, device); + + memset(&tf, 0, sizeof(tf)); + + ap->ops->tf_read(ap, &tf); + err = tf.feature; + if (r_err) + *r_err = err; + + /* see if device passed diags */ + if (err == 1) + /* do nothing */ ; + else if ((device == 0) && (err == 0x81)) + /* do nothing */ ; + else + return ATA_DEV_NONE; + + /* determine if device is ATA or ATAPI */ + class = ata_dev_classify(&tf); + + if (class == ATA_DEV_UNKNOWN) + return ATA_DEV_NONE; + if ((class == ATA_DEV_ATA) && (ata_chk_status(ap) == 0)) + return ATA_DEV_NONE; + return class; +} + +/** + * ata_id_string - Convert IDENTIFY DEVICE page into string + * @id: IDENTIFY DEVICE results we will examine + * @s: string into which data is output + * @ofs: offset into identify device page + * @len: length of string to return. must be an even number. + * + * The strings in the IDENTIFY DEVICE page are broken up into + * 16-bit chunks. Run through the string, and output each + * 8-bit chunk linearly, regardless of platform. + * + * LOCKING: + * caller. + */ + +void ata_id_string(const u16 *id, unsigned char *s, + unsigned int ofs, unsigned int len) +{ + unsigned int c; + + while (len > 0) { + c = id[ofs] >> 8; + *s = c; + s++; + + c = id[ofs] & 0xff; + *s = c; + s++; + + ofs++; + len -= 2; + } +} + +/** + * ata_id_c_string - Convert IDENTIFY DEVICE page into C string + * @id: IDENTIFY DEVICE results we will examine + * @s: string into which data is output + * @ofs: offset into identify device page + * @len: length of string to return. must be an odd number. + * + * This function is identical to ata_id_string except that it + * trims trailing spaces and terminates the resulting string with + * null. @len must be actual maximum length (even number) + 1. + * + * LOCKING: + * caller. + */ +void ata_id_c_string(const u16 *id, unsigned char *s, + unsigned int ofs, unsigned int len) +{ + unsigned char *p; + + WARN_ON(!(len & 1)); + + ata_id_string(id, s, ofs, len - 1); + + p = s + strnlen(s, len - 1); + while (p > s && p[-1] == ' ') + p--; + *p = '\0'; +} + +static u64 ata_id_n_sectors(const u16 *id) +{ + if (ata_id_has_lba(id)) { + if (ata_id_has_lba48(id)) + return ata_id_u64(id, 100); + else + return ata_id_u32(id, 60); + } else { + if (ata_id_current_chs_valid(id)) + return ata_id_u32(id, 57); + else + return id[1] * id[3] * id[6]; + } +} + +/** + * ata_noop_dev_select - Select device 0/1 on ATA bus + * @ap: ATA channel to manipulate + * @device: ATA device (numbered from zero) to select + * + * This function performs no actual function. + * + * May be used as the dev_select() entry in ata_port_operations. + * + * LOCKING: + * caller. + */ +void ata_noop_dev_select (struct ata_port *ap, unsigned int device) +{ +} + + +/** + * ata_std_dev_select - Select device 0/1 on ATA bus + * @ap: ATA channel to manipulate + * @device: ATA device (numbered from zero) to select + * + * Use the method defined in the ATA specification to + * make either device 0, or device 1, active on the + * ATA channel. Works with both PIO and MMIO. + * + * May be used as the dev_select() entry in ata_port_operations. + * + * LOCKING: + * caller. + */ + +void ata_std_dev_select (struct ata_port *ap, unsigned int device) +{ + u8 tmp; + + if (device == 0) + tmp = ATA_DEVICE_OBS; + else + tmp = ATA_DEVICE_OBS | ATA_DEV1; + + if (ap->flags & ATA_FLAG_MMIO) { + writeb(tmp, (void __iomem *) ap->ioaddr.device_addr); + } else { + outb(tmp, ap->ioaddr.device_addr); + } + ata_pause(ap); /* needed; also flushes, for mmio */ +} + +/** + * ata_dev_select - Select device 0/1 on ATA bus + * @ap: ATA channel to manipulate + * @device: ATA device (numbered from zero) to select + * @wait: non-zero to wait for Status register BSY bit to clear + * @can_sleep: non-zero if context allows sleeping + * + * Use the method defined in the ATA specification to + * make either device 0, or device 1, active on the + * ATA channel. + * + * This is a high-level version of ata_std_dev_select(), + * which additionally provides the services of inserting + * the proper pauses and status polling, where needed. + * + * LOCKING: + * caller. + */ + +void ata_dev_select(struct ata_port *ap, unsigned int device, + unsigned int wait, unsigned int can_sleep) +{ + if (ata_msg_probe(ap)) + ata_port_printk(ap, KERN_INFO, "ata_dev_select: ENTER, ata%u: " + "device %u, wait %u\n", ap->id, device, wait); + + if (wait) + ata_wait_idle(ap); + + ap->ops->dev_select(ap, device); + + if (wait) { + if (can_sleep && ap->device[device].class == ATA_DEV_ATAPI) + msleep(150); + ata_wait_idle(ap); + } +} + +/** + * ata_dump_id - IDENTIFY DEVICE info debugging output + * @id: IDENTIFY DEVICE page to dump + * + * Dump selected 16-bit words from the given IDENTIFY DEVICE + * page. + * + * LOCKING: + * caller. + */ + +static inline void ata_dump_id(const u16 *id) +{ + DPRINTK("49==0x%04x " + "53==0x%04x " + "63==0x%04x " + "64==0x%04x " + "75==0x%04x \n", + id[49], + id[53], + id[63], + id[64], + id[75]); + DPRINTK("80==0x%04x " + "81==0x%04x " + "82==0x%04x " + "83==0x%04x " + "84==0x%04x \n", + id[80], + id[81], + id[82], + id[83], + id[84]); + DPRINTK("88==0x%04x " + "93==0x%04x\n", + id[88], + id[93]); +} + +/** + * ata_id_xfermask - Compute xfermask from the given IDENTIFY data + * @id: IDENTIFY data to compute xfer mask from + * + * Compute the xfermask for this device. This is not as trivial + * as it seems if we must consider early devices correctly. + * + * FIXME: pre IDE drive timing (do we care ?). + * + * LOCKING: + * None. + * + * RETURNS: + * Computed xfermask + */ +static unsigned int ata_id_xfermask(const u16 *id) +{ + unsigned int pio_mask, mwdma_mask, udma_mask; + + /* Usual case. Word 53 indicates word 64 is valid */ + if (id[ATA_ID_FIELD_VALID] & (1 << 1)) { + pio_mask = id[ATA_ID_PIO_MODES] & 0x03; + pio_mask <<= 3; + pio_mask |= 0x7; + } else { + /* If word 64 isn't valid then Word 51 high byte holds + * the PIO timing number for the maximum. Turn it into + * a mask. + */ + pio_mask = (2 << (id[ATA_ID_OLD_PIO_MODES] & 0xFF)) - 1 ; + + /* But wait.. there's more. Design your standards by + * committee and you too can get a free iordy field to + * process. However its the speeds not the modes that + * are supported... Note drivers using the timing API + * will get this right anyway + */ + } + + mwdma_mask = id[ATA_ID_MWDMA_MODES] & 0x07; + + udma_mask = 0; + if (id[ATA_ID_FIELD_VALID] & (1 << 2)) + udma_mask = id[ATA_ID_UDMA_MODES] & 0xff; + + return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask); +} + +/** + * ata_port_queue_task - Queue port_task + * @ap: The ata_port to queue port_task for + * @fn: workqueue function to be scheduled + * @data: data value to pass to workqueue function + * @delay: delay time for workqueue function + * + * Schedule @fn(@data) for execution after @delay jiffies using + * port_task. There is one port_task per port and it's the + * user(low level driver)'s responsibility to make sure that only + * one task is active at any given time. + * + * libata core layer takes care of synchronization between + * port_task and EH. ata_port_queue_task() may be ignored for EH + * synchronization. + * + * LOCKING: + * Inherited from caller. + */ +void ata_port_queue_task(struct ata_port *ap, void (*fn)(void *), void *data, + unsigned long delay) +{ + int rc; + + if (ap->pflags & ATA_PFLAG_FLUSH_PORT_TASK) + return; + + PREPARE_WORK(&ap->port_task, fn, data); + + if (!delay) + rc = queue_work(ata_wq, &ap->port_task); + else + rc = queue_delayed_work(ata_wq, &ap->port_task, delay); + + /* rc == 0 means that another user is using port task */ + WARN_ON(rc == 0); +} + +/** + * ata_port_flush_task - Flush port_task + * @ap: The ata_port to flush port_task for + * + * After this function completes, port_task is guranteed not to + * be running or scheduled. + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_port_flush_task(struct ata_port *ap) +{ + unsigned long flags; + + DPRINTK("ENTER\n"); + + spin_lock_irqsave(ap->lock, flags); + ap->pflags |= ATA_PFLAG_FLUSH_PORT_TASK; + spin_unlock_irqrestore(ap->lock, flags); + + DPRINTK("flush #1\n"); + flush_workqueue(ata_wq); + + /* + * At this point, if a task is running, it's guaranteed to see + * the FLUSH flag; thus, it will never queue pio tasks again. + * Cancel and flush. + */ + if (!cancel_delayed_work(&ap->port_task)) { + if (ata_msg_ctl(ap)) + ata_port_printk(ap, KERN_DEBUG, "%s: flush #2\n", + __FUNCTION__); + flush_workqueue(ata_wq); + } + + spin_lock_irqsave(ap->lock, flags); + ap->pflags &= ~ATA_PFLAG_FLUSH_PORT_TASK; + spin_unlock_irqrestore(ap->lock, flags); + + if (ata_msg_ctl(ap)) + ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __FUNCTION__); +} + +void ata_qc_complete_internal(struct ata_queued_cmd *qc) +{ + struct completion *waiting = qc->private_data; + + complete(waiting); +} + +/** + * ata_exec_internal - execute libata internal command + * @dev: Device to which the command is sent + * @tf: Taskfile registers for the command and the result + * @cdb: CDB for packet command + * @dma_dir: Data tranfer direction of the command + * @buf: Data buffer of the command + * @buflen: Length of data buffer + * + * Executes libata internal command with timeout. @tf contains + * command on entry and result on return. Timeout and error + * conditions are reported via return value. No recovery action + * is taken after a command times out. It's caller's duty to + * clean up after timeout. + * + * LOCKING: + * None. Should be called with kernel context, might sleep. + * + * RETURNS: + * Zero on success, AC_ERR_* mask on failure + */ +unsigned ata_exec_internal(struct ata_device *dev, + struct ata_taskfile *tf, const u8 *cdb, + int dma_dir, void *buf, unsigned int buflen) +{ + struct ata_port *ap = dev->ap; + u8 command = tf->command; + struct ata_queued_cmd *qc; + unsigned int tag, preempted_tag; + u32 preempted_sactive, preempted_qc_active; + DECLARE_COMPLETION_ONSTACK(wait); + unsigned long flags; + unsigned int err_mask; + int rc; + + spin_lock_irqsave(ap->lock, flags); + + /* no internal command while frozen */ + if (ap->pflags & ATA_PFLAG_FROZEN) { + spin_unlock_irqrestore(ap->lock, flags); + return AC_ERR_SYSTEM; + } + + /* initialize internal qc */ + + /* XXX: Tag 0 is used for drivers with legacy EH as some + * drivers choke if any other tag is given. This breaks + * ata_tag_internal() test for those drivers. Don't use new + * EH stuff without converting to it. + */ + if (ap->ops->error_handler) + tag = ATA_TAG_INTERNAL; + else + tag = 0; + + if (test_and_set_bit(tag, &ap->qc_allocated)) + BUG(); + qc = __ata_qc_from_tag(ap, tag); + + qc->tag = tag; + qc->scsicmd = NULL; + qc->ap = ap; + qc->dev = dev; + ata_qc_reinit(qc); + + preempted_tag = ap->active_tag; + preempted_sactive = ap->sactive; + preempted_qc_active = ap->qc_active; + ap->active_tag = ATA_TAG_POISON; + ap->sactive = 0; + ap->qc_active = 0; + + /* prepare & issue qc */ + qc->tf = *tf; + if (cdb) + memcpy(qc->cdb, cdb, ATAPI_CDB_LEN); + qc->flags |= ATA_QCFLAG_RESULT_TF; + qc->dma_dir = dma_dir; + if (dma_dir != DMA_NONE) { + ata_sg_init_one(qc, buf, buflen); + qc->nsect = buflen / ATA_SECT_SIZE; + } + + qc->private_data = &wait; + qc->complete_fn = ata_qc_complete_internal; + + ata_qc_issue(qc); + + spin_unlock_irqrestore(ap->lock, flags); + + rc = wait_for_completion_timeout(&wait, ata_probe_timeout); + + ata_port_flush_task(ap); + + if (!rc) { + spin_lock_irqsave(ap->lock, flags); + + /* We're racing with irq here. If we lose, the + * following test prevents us from completing the qc + * twice. If we win, the port is frozen and will be + * cleaned up by ->post_internal_cmd(). + */ + if (qc->flags & ATA_QCFLAG_ACTIVE) { + qc->err_mask |= AC_ERR_TIMEOUT; + + if (ap->ops->error_handler) + ata_port_freeze(ap); + else + ata_qc_complete(qc); + + if (ata_msg_warn(ap)) + ata_dev_printk(dev, KERN_WARNING, + "qc timeout (cmd 0x%x)\n", command); + } + + spin_unlock_irqrestore(ap->lock, flags); + } + + /* do post_internal_cmd */ + if (ap->ops->post_internal_cmd) + ap->ops->post_internal_cmd(qc); + + if (qc->flags & ATA_QCFLAG_FAILED && !qc->err_mask) { + if (ata_msg_warn(ap)) + ata_dev_printk(dev, KERN_WARNING, + "zero err_mask for failed " + "internal command, assuming AC_ERR_OTHER\n"); + qc->err_mask |= AC_ERR_OTHER; + } + + /* finish up */ + spin_lock_irqsave(ap->lock, flags); + + *tf = qc->result_tf; + err_mask = qc->err_mask; + + ata_qc_free(qc); + ap->active_tag = preempted_tag; + ap->sactive = preempted_sactive; + ap->qc_active = preempted_qc_active; + + /* XXX - Some LLDDs (sata_mv) disable port on command failure. + * Until those drivers are fixed, we detect the condition + * here, fail the command with AC_ERR_SYSTEM and reenable the + * port. + * + * Note that this doesn't change any behavior as internal + * command failure results in disabling the device in the + * higher layer for LLDDs without new reset/EH callbacks. + * + * Kill the following code as soon as those drivers are fixed. + */ + if (ap->flags & ATA_FLAG_DISABLED) { + err_mask |= AC_ERR_SYSTEM; + ata_port_probe(ap); + } + + spin_unlock_irqrestore(ap->lock, flags); + + return err_mask; +} + +/** + * ata_do_simple_cmd - execute simple internal command + * @dev: Device to which the command is sent + * @cmd: Opcode to execute + * + * Execute a 'simple' command, that only consists of the opcode + * 'cmd' itself, without filling any other registers + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * Zero on success, AC_ERR_* mask on failure + */ +unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd) +{ + struct ata_taskfile tf; + + ata_tf_init(dev, &tf); + + tf.command = cmd; + tf.flags |= ATA_TFLAG_DEVICE; + tf.protocol = ATA_PROT_NODATA; + + return ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); +} + +/** + * ata_pio_need_iordy - check if iordy needed + * @adev: ATA device + * + * Check if the current speed of the device requires IORDY. Used + * by various controllers for chip configuration. + */ + +unsigned int ata_pio_need_iordy(const struct ata_device *adev) +{ + int pio; + int speed = adev->pio_mode - XFER_PIO_0; + + if (speed < 2) + return 0; + if (speed > 2) + return 1; + + /* If we have no drive specific rule, then PIO 2 is non IORDY */ + + if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE */ + pio = adev->id[ATA_ID_EIDE_PIO]; + /* Is the speed faster than the drive allows non IORDY ? */ + if (pio) { + /* This is cycle times not frequency - watch the logic! */ + if (pio > 240) /* PIO2 is 240nS per cycle */ + return 1; + return 0; + } + } + return 0; +} + +/** + * ata_dev_read_id - Read ID data from the specified device + * @dev: target device + * @p_class: pointer to class of the target device (may be changed) + * @post_reset: is this read ID post-reset? + * @id: buffer to read IDENTIFY data into + * + * Read ID data from the specified device. ATA_CMD_ID_ATA is + * performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI + * devices. This function also issues ATA_CMD_INIT_DEV_PARAMS + * for pre-ATA4 drives. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, + int post_reset, u16 *id) +{ + struct ata_port *ap = dev->ap; + unsigned int class = *p_class; + struct ata_taskfile tf; + unsigned int err_mask = 0; + const char *reason; + int rc; + + if (ata_msg_ctl(ap)) + ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n", + __FUNCTION__, ap->id, dev->devno); + + ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */ + + retry: + ata_tf_init(dev, &tf); + + switch (class) { + case ATA_DEV_ATA: + tf.command = ATA_CMD_ID_ATA; + break; + case ATA_DEV_ATAPI: + tf.command = ATA_CMD_ID_ATAPI; + break; + default: + rc = -ENODEV; + reason = "unsupported class"; + goto err_out; + } + + tf.protocol = ATA_PROT_PIO; + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE, + id, sizeof(id[0]) * ATA_ID_WORDS); + if (err_mask) { + rc = -EIO; + reason = "I/O error"; + goto err_out; + } + + swap_buf_le16(id, ATA_ID_WORDS); + + /* sanity check */ + if ((class == ATA_DEV_ATA) != (ata_id_is_ata(id) | ata_id_is_cfa(id))) { + rc = -EINVAL; + reason = "device reports illegal type"; + goto err_out; + } + + if (post_reset && class == ATA_DEV_ATA) { + /* + * The exact sequence expected by certain pre-ATA4 drives is: + * SRST RESET + * IDENTIFY + * INITIALIZE DEVICE PARAMETERS + * anything else.. + * Some drives were very specific about that exact sequence. + */ + if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) { + err_mask = ata_dev_init_params(dev, id[3], id[6]); + if (err_mask) { + rc = -EIO; + reason = "INIT_DEV_PARAMS failed"; + goto err_out; + } + + /* current CHS translation info (id[53-58]) might be + * changed. reread the identify device info. + */ + post_reset = 0; + goto retry; + } + } + + *p_class = class; + + return 0; + + err_out: + if (ata_msg_warn(ap)) + ata_dev_printk(dev, KERN_WARNING, "failed to IDENTIFY " + "(%s, err_mask=0x%x)\n", reason, err_mask); + return rc; +} + +static inline u8 ata_dev_knobble(struct ata_device *dev) +{ + return ((dev->ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id))); +} + +static void ata_dev_config_ncq(struct ata_device *dev, + char *desc, size_t desc_sz) +{ + struct ata_port *ap = dev->ap; + int hdepth = 0, ddepth = ata_id_queue_depth(dev->id); + + if (!ata_id_has_ncq(dev->id)) { + desc[0] = '\0'; + return; + } + + if (ap->flags & ATA_FLAG_NCQ) { + hdepth = min(ap->host->can_queue, ATA_MAX_QUEUE - 1); + dev->flags |= ATA_DFLAG_NCQ; + } + + if (hdepth >= ddepth) + snprintf(desc, desc_sz, "NCQ (depth %d)", ddepth); + else + snprintf(desc, desc_sz, "NCQ (depth %d/%d)", hdepth, ddepth); +} + +static void ata_set_port_max_cmd_len(struct ata_port *ap) +{ + int i; + + if (ap->host) { + ap->host->max_cmd_len = 0; + for (i = 0; i < ATA_MAX_DEVICES; i++) + ap->host->max_cmd_len = max_t(unsigned int, + ap->host->max_cmd_len, + ap->device[i].cdb_len); + } +} + +/** + * ata_dev_configure - Configure the specified ATA/ATAPI device + * @dev: Target device to configure + * @print_info: Enable device info printout + * + * Configure @dev according to @dev->id. Generic and low-level + * driver specific fixups are also applied. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise + */ +int ata_dev_configure(struct ata_device *dev, int print_info) +{ + struct ata_port *ap = dev->ap; + const u16 *id = dev->id; + unsigned int xfer_mask; + int rc; + + if (!ata_dev_enabled(dev) && ata_msg_info(ap)) { + ata_dev_printk(dev, KERN_INFO, + "%s: ENTER/EXIT (host %u, dev %u) -- nodev\n", + __FUNCTION__, ap->id, dev->devno); + return 0; + } + + if (ata_msg_probe(ap)) + ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n", + __FUNCTION__, ap->id, dev->devno); + + /* print device capabilities */ + if (ata_msg_probe(ap)) + ata_dev_printk(dev, KERN_DEBUG, + "%s: cfg 49:%04x 82:%04x 83:%04x 84:%04x " + "85:%04x 86:%04x 87:%04x 88:%04x\n", + __FUNCTION__, + id[49], id[82], id[83], id[84], + id[85], id[86], id[87], id[88]); + + /* initialize to-be-configured parameters */ + dev->flags &= ~ATA_DFLAG_CFG_MASK; + dev->max_sectors = 0; + dev->cdb_len = 0; + dev->n_sectors = 0; + dev->cylinders = 0; + dev->heads = 0; + dev->sectors = 0; + + /* + * common ATA, ATAPI feature tests + */ + + /* find max transfer mode; for printk only */ + xfer_mask = ata_id_xfermask(id); + + if (ata_msg_probe(ap)) + ata_dump_id(id); + + /* ATA-specific feature tests */ + if (dev->class == ATA_DEV_ATA) { + dev->n_sectors = ata_id_n_sectors(id); + + if (ata_id_has_lba(id)) { + const char *lba_desc; + char ncq_desc[20]; + + lba_desc = "LBA"; + dev->flags |= ATA_DFLAG_LBA; + if (ata_id_has_lba48(id)) { + dev->flags |= ATA_DFLAG_LBA48; + lba_desc = "LBA48"; + } + + /* config NCQ */ + ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc)); + + /* print device info to dmesg */ + if (ata_msg_drv(ap) && print_info) + ata_dev_printk(dev, KERN_INFO, "ATA-%d, " + "max %s, %Lu sectors: %s %s\n", + ata_id_major_version(id), + ata_mode_string(xfer_mask), + (unsigned long long)dev->n_sectors, + lba_desc, ncq_desc); + } else { + /* CHS */ + + /* Default translation */ + dev->cylinders = id[1]; + dev->heads = id[3]; + dev->sectors = id[6]; + + if (ata_id_current_chs_valid(id)) { + /* Current CHS translation is valid. */ + dev->cylinders = id[54]; + dev->heads = id[55]; + dev->sectors = id[56]; + } + + /* print device info to dmesg */ + if (ata_msg_drv(ap) && print_info) + ata_dev_printk(dev, KERN_INFO, "ATA-%d, " + "max %s, %Lu sectors: CHS %u/%u/%u\n", + ata_id_major_version(id), + ata_mode_string(xfer_mask), + (unsigned long long)dev->n_sectors, + dev->cylinders, dev->heads, + dev->sectors); + } + + if (dev->id[59] & 0x100) { + dev->multi_count = dev->id[59] & 0xff; + if (ata_msg_drv(ap) && print_info) + ata_dev_printk(dev, KERN_INFO, + "ata%u: dev %u multi count %u\n", + ap->id, dev->devno, dev->multi_count); + } + + dev->cdb_len = 16; + } + + /* ATAPI-specific feature tests */ + else if (dev->class == ATA_DEV_ATAPI) { + char *cdb_intr_string = ""; + + rc = atapi_cdb_len(id); + if ((rc < 12) || (rc > ATAPI_CDB_LEN)) { + if (ata_msg_warn(ap)) + ata_dev_printk(dev, KERN_WARNING, + "unsupported CDB len\n"); + rc = -EINVAL; + goto err_out_nosup; + } + dev->cdb_len = (unsigned int) rc; + + if (ata_id_cdb_intr(dev->id)) { + dev->flags |= ATA_DFLAG_CDB_INTR; + cdb_intr_string = ", CDB intr"; + } + + /* print device info to dmesg */ + if (ata_msg_drv(ap) && print_info) + ata_dev_printk(dev, KERN_INFO, "ATAPI, max %s%s\n", + ata_mode_string(xfer_mask), + cdb_intr_string); + } + + ata_set_port_max_cmd_len(ap); + + /* limit bridge transfers to udma5, 200 sectors */ + if (ata_dev_knobble(dev)) { + if (ata_msg_drv(ap) && print_info) + ata_dev_printk(dev, KERN_INFO, + "applying bridge limits\n"); + dev->udma_mask &= ATA_UDMA5; + dev->max_sectors = ATA_MAX_SECTORS; + } + + if (ap->ops->dev_config) + ap->ops->dev_config(ap, dev); + + if (ata_msg_probe(ap)) + ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n", + __FUNCTION__, ata_chk_status(ap)); + return 0; + +err_out_nosup: + if (ata_msg_probe(ap)) + ata_dev_printk(dev, KERN_DEBUG, + "%s: EXIT, err\n", __FUNCTION__); + return rc; +} + +/** + * ata_bus_probe - Reset and probe ATA bus + * @ap: Bus to probe + * + * Master ATA bus probing function. Initiates a hardware-dependent + * bus reset, then attempts to identify any devices found on + * the bus. + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * Zero on success, negative errno otherwise. + */ + +int ata_bus_probe(struct ata_port *ap) +{ + unsigned int classes[ATA_MAX_DEVICES]; + int tries[ATA_MAX_DEVICES]; + int i, rc, down_xfermask; + struct ata_device *dev; + + ata_port_probe(ap); + + for (i = 0; i < ATA_MAX_DEVICES; i++) + tries[i] = ATA_PROBE_MAX_TRIES; + + retry: + down_xfermask = 0; + + /* reset and determine device classes */ + ap->ops->phy_reset(ap); + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + + if (!(ap->flags & ATA_FLAG_DISABLED) && + dev->class != ATA_DEV_UNKNOWN) + classes[dev->devno] = dev->class; + else + classes[dev->devno] = ATA_DEV_NONE; + + dev->class = ATA_DEV_UNKNOWN; + } + + ata_port_probe(ap); + + /* after the reset the device state is PIO 0 and the controller + state is undefined. Record the mode */ + + for (i = 0; i < ATA_MAX_DEVICES; i++) + ap->device[i].pio_mode = XFER_PIO_0; + + /* read IDENTIFY page and configure devices */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + + if (tries[i]) + dev->class = classes[i]; + + if (!ata_dev_enabled(dev)) + continue; + + rc = ata_dev_read_id(dev, &dev->class, 1, dev->id); + if (rc) + goto fail; + + rc = ata_dev_configure(dev, 1); + if (rc) + goto fail; + } + + /* configure transfer mode */ + rc = ata_set_mode(ap, &dev); + if (rc) { + down_xfermask = 1; + goto fail; + } + + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (ata_dev_enabled(&ap->device[i])) + return 0; + + /* no device present, disable port */ + ata_port_disable(ap); + ap->ops->port_disable(ap); + return -ENODEV; + + fail: + switch (rc) { + case -EINVAL: + case -ENODEV: + tries[dev->devno] = 0; + break; + case -EIO: + sata_down_spd_limit(ap); + /* fall through */ + default: + tries[dev->devno]--; + if (down_xfermask && + ata_down_xfermask_limit(dev, tries[dev->devno] == 1)) + tries[dev->devno] = 0; + } + + if (!tries[dev->devno]) { + ata_down_xfermask_limit(dev, 1); + ata_dev_disable(dev); + } + + goto retry; +} + +/** + * ata_port_probe - Mark port as enabled + * @ap: Port for which we indicate enablement + * + * Modify @ap data structure such that the system + * thinks that the entire port is enabled. + * + * LOCKING: host_set lock, or some other form of + * serialization. + */ + +void ata_port_probe(struct ata_port *ap) +{ + ap->flags &= ~ATA_FLAG_DISABLED; +} + +/** + * sata_print_link_status - Print SATA link status + * @ap: SATA port to printk link status about + * + * This function prints link speed and status of a SATA link. + * + * LOCKING: + * None. + */ +static void sata_print_link_status(struct ata_port *ap) +{ + u32 sstatus, scontrol, tmp; + + if (sata_scr_read(ap, SCR_STATUS, &sstatus)) + return; + sata_scr_read(ap, SCR_CONTROL, &scontrol); + + if (ata_port_online(ap)) { + tmp = (sstatus >> 4) & 0xf; + ata_port_printk(ap, KERN_INFO, + "SATA link up %s (SStatus %X SControl %X)\n", + sata_spd_string(tmp), sstatus, scontrol); + } else { + ata_port_printk(ap, KERN_INFO, + "SATA link down (SStatus %X SControl %X)\n", + sstatus, scontrol); + } +} + +/** + * __sata_phy_reset - Wake/reset a low-level SATA PHY + * @ap: SATA port associated with target SATA PHY. + * + * This function issues commands to standard SATA Sxxx + * PHY registers, to wake up the phy (and device), and + * clear any reset condition. + * + * LOCKING: + * PCI/etc. bus probe sem. + * + */ +void __sata_phy_reset(struct ata_port *ap) +{ + u32 sstatus; + unsigned long timeout = jiffies + (HZ * 5); + + if (ap->flags & ATA_FLAG_SATA_RESET) { + /* issue phy wake/reset */ + sata_scr_write_flush(ap, SCR_CONTROL, 0x301); + /* Couldn't find anything in SATA I/II specs, but + * AHCI-1.1 10.4.2 says at least 1 ms. */ + mdelay(1); + } + /* phy wake/clear reset */ + sata_scr_write_flush(ap, SCR_CONTROL, 0x300); + + /* wait for phy to become ready, if necessary */ + do { + msleep(200); + sata_scr_read(ap, SCR_STATUS, &sstatus); + if ((sstatus & 0xf) != 1) + break; + } while (time_before(jiffies, timeout)); + + /* print link status */ + sata_print_link_status(ap); + + /* TODO: phy layer with polling, timeouts, etc. */ + if (!ata_port_offline(ap)) + ata_port_probe(ap); + else + ata_port_disable(ap); + + if (ap->flags & ATA_FLAG_DISABLED) + return; + + if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { + ata_port_disable(ap); + return; + } + + ap->cbl = ATA_CBL_SATA; +} + +/** + * sata_phy_reset - Reset SATA bus. + * @ap: SATA port associated with target SATA PHY. + * + * This function resets the SATA bus, and then probes + * the bus for devices. + * + * LOCKING: + * PCI/etc. bus probe sem. + * + */ +void sata_phy_reset(struct ata_port *ap) +{ + __sata_phy_reset(ap); + if (ap->flags & ATA_FLAG_DISABLED) + return; + ata_bus_reset(ap); +} + +/** + * ata_dev_pair - return other device on cable + * @adev: device + * + * Obtain the other device on the same cable, or if none is + * present NULL is returned + */ + +struct ata_device *ata_dev_pair(struct ata_device *adev) +{ + struct ata_port *ap = adev->ap; + struct ata_device *pair = &ap->device[1 - adev->devno]; + if (!ata_dev_enabled(pair)) + return NULL; + return pair; +} + +/** + * ata_port_disable - Disable port. + * @ap: Port to be disabled. + * + * Modify @ap data structure such that the system + * thinks that the entire port is disabled, and should + * never attempt to probe or communicate with devices + * on this port. + * + * LOCKING: host_set lock, or some other form of + * serialization. + */ + +void ata_port_disable(struct ata_port *ap) +{ + ap->device[0].class = ATA_DEV_NONE; + ap->device[1].class = ATA_DEV_NONE; + ap->flags |= ATA_FLAG_DISABLED; +} + +/** + * sata_down_spd_limit - adjust SATA spd limit downward + * @ap: Port to adjust SATA spd limit for + * + * Adjust SATA spd limit of @ap downward. Note that this + * function only adjusts the limit. The change must be applied + * using sata_set_spd(). + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * 0 on success, negative errno on failure + */ +int sata_down_spd_limit(struct ata_port *ap) +{ + u32 sstatus, spd, mask; + int rc, highbit; + + rc = sata_scr_read(ap, SCR_STATUS, &sstatus); + if (rc) + return rc; + + mask = ap->sata_spd_limit; + if (mask <= 1) + return -EINVAL; + highbit = fls(mask) - 1; + mask &= ~(1 << highbit); + + spd = (sstatus >> 4) & 0xf; + if (spd <= 1) + return -EINVAL; + spd--; + mask &= (1 << spd) - 1; + if (!mask) + return -EINVAL; + + ap->sata_spd_limit = mask; + + ata_port_printk(ap, KERN_WARNING, "limiting SATA link speed to %s\n", + sata_spd_string(fls(mask))); + + return 0; +} + +static int __sata_set_spd_needed(struct ata_port *ap, u32 *scontrol) +{ + u32 spd, limit; + + if (ap->sata_spd_limit == UINT_MAX) + limit = 0; + else + limit = fls(ap->sata_spd_limit); + + spd = (*scontrol >> 4) & 0xf; + *scontrol = (*scontrol & ~0xf0) | ((limit & 0xf) << 4); + + return spd != limit; +} + +/** + * sata_set_spd_needed - is SATA spd configuration needed + * @ap: Port in question + * + * Test whether the spd limit in SControl matches + * @ap->sata_spd_limit. This function is used to determine + * whether hardreset is necessary to apply SATA spd + * configuration. + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * 1 if SATA spd configuration is needed, 0 otherwise. + */ +int sata_set_spd_needed(struct ata_port *ap) +{ + u32 scontrol; + + if (sata_scr_read(ap, SCR_CONTROL, &scontrol)) + return 0; + + return __sata_set_spd_needed(ap, &scontrol); +} + +/** + * sata_set_spd - set SATA spd according to spd limit + * @ap: Port to set SATA spd for + * + * Set SATA spd of @ap according to sata_spd_limit. + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * 0 if spd doesn't need to be changed, 1 if spd has been + * changed. Negative errno if SCR registers are inaccessible. + */ +int sata_set_spd(struct ata_port *ap) +{ + u32 scontrol; + int rc; + + if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) + return rc; + + if (!__sata_set_spd_needed(ap, &scontrol)) + return 0; + + if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) + return rc; + + return 1; +} + +/* + * This mode timing computation functionality is ported over from + * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik + */ +/* + * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). + * These were taken from ATA/ATAPI-6 standard, rev 0a, except + * for PIO 5, which is a nonstandard extension and UDMA6, which + * is currently supported only by Maxtor drives. + */ + +static const struct ata_timing ata_timing[] = { + + { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 }, + { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 }, + { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, + { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, + + { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, + { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, + { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, + +/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */ + + { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, + { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, + { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, + + { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, + { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, + { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, + +/* { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 }, */ + { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, + { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, + + { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 }, + { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 }, + { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 }, + +/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */ + + { 0xFF } +}; + +#define ENOUGH(v,unit) (((v)-1)/(unit)+1) +#define EZ(v,unit) ((v)?ENOUGH(v,unit):0) + +static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT) +{ + q->setup = EZ(t->setup * 1000, T); + q->act8b = EZ(t->act8b * 1000, T); + q->rec8b = EZ(t->rec8b * 1000, T); + q->cyc8b = EZ(t->cyc8b * 1000, T); + q->active = EZ(t->active * 1000, T); + q->recover = EZ(t->recover * 1000, T); + q->cycle = EZ(t->cycle * 1000, T); + q->udma = EZ(t->udma * 1000, UT); +} + +void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b, + struct ata_timing *m, unsigned int what) +{ + if (what & ATA_TIMING_SETUP ) m->setup = max(a->setup, b->setup); + if (what & ATA_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b); + if (what & ATA_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b); + if (what & ATA_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b); + if (what & ATA_TIMING_ACTIVE ) m->active = max(a->active, b->active); + if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover); + if (what & ATA_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle); + if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma); +} + +static const struct ata_timing* ata_timing_find_mode(unsigned short speed) +{ + const struct ata_timing *t; + + for (t = ata_timing; t->mode != speed; t++) + if (t->mode == 0xFF) + return NULL; + return t; +} + +int ata_timing_compute(struct ata_device *adev, unsigned short speed, + struct ata_timing *t, int T, int UT) +{ + const struct ata_timing *s; + struct ata_timing p; + + /* + * Find the mode. + */ + + if (!(s = ata_timing_find_mode(speed))) + return -EINVAL; + + memcpy(t, s, sizeof(*s)); + + /* + * If the drive is an EIDE drive, it can tell us it needs extended + * PIO/MW_DMA cycle timing. + */ + + if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ + memset(&p, 0, sizeof(p)); + if(speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) { + if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO]; + else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY]; + } else if(speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) { + p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN]; + } + ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B); + } + + /* + * Convert the timing to bus clock counts. + */ + + ata_timing_quantize(t, t, T, UT); + + /* + * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, + * S.M.A.R.T * and some other commands. We have to ensure that the + * DMA cycle timing is slower/equal than the fastest PIO timing. + */ + + if (speed > XFER_PIO_4) { + ata_timing_compute(adev, adev->pio_mode, &p, T, UT); + ata_timing_merge(&p, t, t, ATA_TIMING_ALL); + } + + /* + * Lengthen active & recovery time so that cycle time is correct. + */ + + if (t->act8b + t->rec8b < t->cyc8b) { + t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2; + t->rec8b = t->cyc8b - t->act8b; + } + + if (t->active + t->recover < t->cycle) { + t->active += (t->cycle - (t->active + t->recover)) / 2; + t->recover = t->cycle - t->active; + } + + return 0; +} + +/** + * ata_down_xfermask_limit - adjust dev xfer masks downward + * @dev: Device to adjust xfer masks + * @force_pio0: Force PIO0 + * + * Adjust xfer masks of @dev downward. Note that this function + * does not apply the change. Invoking ata_set_mode() afterwards + * will apply the limit. + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * 0 on success, negative errno on failure + */ +int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0) +{ + unsigned long xfer_mask; + int highbit; + + xfer_mask = ata_pack_xfermask(dev->pio_mask, dev->mwdma_mask, + dev->udma_mask); + + if (!xfer_mask) + goto fail; + /* don't gear down to MWDMA from UDMA, go directly to PIO */ + if (xfer_mask & ATA_MASK_UDMA) + xfer_mask &= ~ATA_MASK_MWDMA; + + highbit = fls(xfer_mask) - 1; + xfer_mask &= ~(1 << highbit); + if (force_pio0) + xfer_mask &= 1 << ATA_SHIFT_PIO; + if (!xfer_mask) + goto fail; + + ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask, + &dev->udma_mask); + + ata_dev_printk(dev, KERN_WARNING, "limiting speed to %s\n", + ata_mode_string(xfer_mask)); + + return 0; + + fail: + return -EINVAL; +} + +static int ata_dev_set_mode(struct ata_device *dev) +{ + unsigned int err_mask; + int rc; + + dev->flags &= ~ATA_DFLAG_PIO; + if (dev->xfer_shift == ATA_SHIFT_PIO) + dev->flags |= ATA_DFLAG_PIO; + + err_mask = ata_dev_set_xfermode(dev); + if (err_mask) { + ata_dev_printk(dev, KERN_ERR, "failed to set xfermode " + "(err_mask=0x%x)\n", err_mask); + return -EIO; + } + + rc = ata_dev_revalidate(dev, 0); + if (rc) + return rc; + + DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n", + dev->xfer_shift, (int)dev->xfer_mode); + + ata_dev_printk(dev, KERN_INFO, "configured for %s\n", + ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode))); + return 0; +} + +/** + * ata_set_mode - Program timings and issue SET FEATURES - XFER + * @ap: port on which timings will be programmed + * @r_failed_dev: out paramter for failed device + * + * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If + * ata_set_mode() fails, pointer to the failing device is + * returned in @r_failed_dev. + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * 0 on success, negative errno otherwise + */ +int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) +{ + struct ata_device *dev; + int i, rc = 0, used_dma = 0, found = 0; + + /* has private set_mode? */ + if (ap->ops->set_mode) { + /* FIXME: make ->set_mode handle no device case and + * return error code and failing device on failure. + */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + if (ata_dev_ready(&ap->device[i])) { + ap->ops->set_mode(ap); + break; + } + } + return 0; + } + + /* step 1: calculate xfer_mask */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + unsigned int pio_mask, dma_mask; + + dev = &ap->device[i]; + + if (!ata_dev_enabled(dev)) + continue; + + ata_dev_xfermask(dev); + + pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0); + dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask); + dev->pio_mode = ata_xfer_mask2mode(pio_mask); + dev->dma_mode = ata_xfer_mask2mode(dma_mask); + + found = 1; + if (dev->dma_mode) + used_dma = 1; + } + if (!found) + goto out; + + /* step 2: always set host PIO timings */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + if (!ata_dev_enabled(dev)) + continue; + + if (!dev->pio_mode) { + ata_dev_printk(dev, KERN_WARNING, "no PIO support\n"); + rc = -EINVAL; + goto out; + } + + dev->xfer_mode = dev->pio_mode; + dev->xfer_shift = ATA_SHIFT_PIO; + if (ap->ops->set_piomode) + ap->ops->set_piomode(ap, dev); + } + + /* step 3: set host DMA timings */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + + if (!ata_dev_enabled(dev) || !dev->dma_mode) + continue; + + dev->xfer_mode = dev->dma_mode; + dev->xfer_shift = ata_xfer_mode2shift(dev->dma_mode); + if (ap->ops->set_dmamode) + ap->ops->set_dmamode(ap, dev); + } + + /* step 4: update devices' xfer mode */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + + /* don't udpate suspended devices' xfer mode */ + if (!ata_dev_ready(dev)) + continue; + + rc = ata_dev_set_mode(dev); + if (rc) + goto out; + } + + /* Record simplex status. If we selected DMA then the other + * host channels are not permitted to do so. + */ + if (used_dma && (ap->host_set->flags & ATA_HOST_SIMPLEX)) + ap->host_set->simplex_claimed = 1; + + /* step5: chip specific finalisation */ + if (ap->ops->post_set_mode) + ap->ops->post_set_mode(ap); + + out: + if (rc) + *r_failed_dev = dev; + return rc; +} + +/** + * ata_tf_to_host - issue ATA taskfile to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues ATA taskfile register set to ATA host controller, + * with proper synchronization with interrupt handler and + * other threads. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +static inline void ata_tf_to_host(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + ap->ops->tf_load(ap, tf); + ap->ops->exec_command(ap, tf); +} + +/** + * ata_busy_sleep - sleep until BSY clears, or timeout + * @ap: port containing status register to be polled + * @tmout_pat: impatience timeout + * @tmout: overall timeout + * + * Sleep until ATA Status register bit BSY clears, + * or a timeout occurs. + * + * LOCKING: None. + */ + +unsigned int ata_busy_sleep (struct ata_port *ap, + unsigned long tmout_pat, unsigned long tmout) +{ + unsigned long timer_start, timeout; + u8 status; + + status = ata_busy_wait(ap, ATA_BUSY, 300); + timer_start = jiffies; + timeout = timer_start + tmout_pat; + while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) { + msleep(50); + status = ata_busy_wait(ap, ATA_BUSY, 3); + } + + if (status & ATA_BUSY) + ata_port_printk(ap, KERN_WARNING, + "port is slow to respond, please be patient\n"); + + timeout = timer_start + tmout; + while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) { + msleep(50); + status = ata_chk_status(ap); + } + + if (status & ATA_BUSY) { + ata_port_printk(ap, KERN_ERR, "port failed to respond " + "(%lu secs)\n", tmout / HZ); + return 1; + } + + return 0; +} + +static void ata_bus_post_reset(struct ata_port *ap, unsigned int devmask) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int dev0 = devmask & (1 << 0); + unsigned int dev1 = devmask & (1 << 1); + unsigned long timeout; + + /* if device 0 was found in ata_devchk, wait for its + * BSY bit to clear + */ + if (dev0) + ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + + /* if device 1 was found in ata_devchk, wait for + * register access, then wait for BSY to clear + */ + timeout = jiffies + ATA_TMOUT_BOOT; + while (dev1) { + u8 nsect, lbal; + + ap->ops->dev_select(ap, 1); + if (ap->flags & ATA_FLAG_MMIO) { + nsect = readb((void __iomem *) ioaddr->nsect_addr); + lbal = readb((void __iomem *) ioaddr->lbal_addr); + } else { + nsect = inb(ioaddr->nsect_addr); + lbal = inb(ioaddr->lbal_addr); + } + if ((nsect == 1) && (lbal == 1)) + break; + if (time_after(jiffies, timeout)) { + dev1 = 0; + break; + } + msleep(50); /* give drive a breather */ + } + if (dev1) + ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + + /* is all this really necessary? */ + ap->ops->dev_select(ap, 0); + if (dev1) + ap->ops->dev_select(ap, 1); + if (dev0) + ap->ops->dev_select(ap, 0); +} + +static unsigned int ata_bus_softreset(struct ata_port *ap, + unsigned int devmask) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + DPRINTK("ata%u: bus reset via SRST\n", ap->id); + + /* software reset. causes dev0 to be selected */ + if (ap->flags & ATA_FLAG_MMIO) { + writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr); + udelay(20); /* FIXME: flush */ + writeb(ap->ctl | ATA_SRST, (void __iomem *) ioaddr->ctl_addr); + udelay(20); /* FIXME: flush */ + writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr); + } else { + outb(ap->ctl, ioaddr->ctl_addr); + udelay(10); + outb(ap->ctl | ATA_SRST, ioaddr->ctl_addr); + udelay(10); + outb(ap->ctl, ioaddr->ctl_addr); + } + + /* spec mandates ">= 2ms" before checking status. + * We wait 150ms, because that was the magic delay used for + * ATAPI devices in Hale Landis's ATADRVR, for the period of time + * between when the ATA command register is written, and then + * status is checked. Because waiting for "a while" before + * checking status is fine, post SRST, we perform this magic + * delay here as well. + * + * Old drivers/ide uses the 2mS rule and then waits for ready + */ + msleep(150); + + /* Before we perform post reset processing we want to see if + * the bus shows 0xFF because the odd clown forgets the D7 + * pulldown resistor. + */ + if (ata_check_status(ap) == 0xFF) { + ata_port_printk(ap, KERN_ERR, "SRST failed (status 0xFF)\n"); + return AC_ERR_OTHER; + } + + ata_bus_post_reset(ap, devmask); + + return 0; +} + +/** + * ata_bus_reset - reset host port and associated ATA channel + * @ap: port to reset + * + * This is typically the first time we actually start issuing + * commands to the ATA channel. We wait for BSY to clear, then + * issue EXECUTE DEVICE DIAGNOSTIC command, polling for its + * result. Determine what devices, if any, are on the channel + * by looking at the device 0/1 error register. Look at the signature + * stored in each device's taskfile registers, to determine if + * the device is ATA or ATAPI. + * + * LOCKING: + * PCI/etc. bus probe sem. + * Obtains host_set lock. + * + * SIDE EFFECTS: + * Sets ATA_FLAG_DISABLED if bus reset fails. + */ + +void ata_bus_reset(struct ata_port *ap) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; + u8 err; + unsigned int dev0, dev1 = 0, devmask = 0; + + DPRINTK("ENTER, host %u, port %u\n", ap->id, ap->port_no); + + /* determine if device 0/1 are present */ + if (ap->flags & ATA_FLAG_SATA_RESET) + dev0 = 1; + else { + dev0 = ata_devchk(ap, 0); + if (slave_possible) + dev1 = ata_devchk(ap, 1); + } + + if (dev0) + devmask |= (1 << 0); + if (dev1) + devmask |= (1 << 1); + + /* select device 0 again */ + ap->ops->dev_select(ap, 0); + + /* issue bus reset */ + if (ap->flags & ATA_FLAG_SRST) + if (ata_bus_softreset(ap, devmask)) + goto err_out; + + /* + * determine by signature whether we have ATA or ATAPI devices + */ + ap->device[0].class = ata_dev_try_classify(ap, 0, &err); + if ((slave_possible) && (err != 0x81)) + ap->device[1].class = ata_dev_try_classify(ap, 1, &err); + + /* re-enable interrupts */ + if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */ + ata_irq_on(ap); + + /* is double-select really necessary? */ + if (ap->device[1].class != ATA_DEV_NONE) + ap->ops->dev_select(ap, 1); + if (ap->device[0].class != ATA_DEV_NONE) + ap->ops->dev_select(ap, 0); + + /* if no devices were detected, disable this port */ + if ((ap->device[0].class == ATA_DEV_NONE) && + (ap->device[1].class == ATA_DEV_NONE)) + goto err_out; + + if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) { + /* set up device control for ATA_FLAG_SATA_RESET */ + if (ap->flags & ATA_FLAG_MMIO) + writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr); + else + outb(ap->ctl, ioaddr->ctl_addr); + } + + DPRINTK("EXIT\n"); + return; + +err_out: + ata_port_printk(ap, KERN_ERR, "disabling port\n"); + ap->ops->port_disable(ap); + + DPRINTK("EXIT\n"); +} + +/** + * sata_phy_debounce - debounce SATA phy status + * @ap: ATA port to debounce SATA phy status for + * @params: timing parameters { interval, duratinon, timeout } in msec + * + * Make sure SStatus of @ap reaches stable state, determined by + * holding the same value where DET is not 1 for @duration polled + * every @interval, before @timeout. Timeout constraints the + * beginning of the stable state. Because, after hot unplugging, + * DET gets stuck at 1 on some controllers, this functions waits + * until timeout then returns 0 if DET is stable at 1. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int sata_phy_debounce(struct ata_port *ap, const unsigned long *params) +{ + unsigned long interval_msec = params[0]; + unsigned long duration = params[1] * HZ / 1000; + unsigned long timeout = jiffies + params[2] * HZ / 1000; + unsigned long last_jiffies; + u32 last, cur; + int rc; + + if ((rc = sata_scr_read(ap, SCR_STATUS, &cur))) + return rc; + cur &= 0xf; + + last = cur; + last_jiffies = jiffies; + + while (1) { + msleep(interval_msec); + if ((rc = sata_scr_read(ap, SCR_STATUS, &cur))) + return rc; + cur &= 0xf; + + /* DET stable? */ + if (cur == last) { + if (cur == 1 && time_before(jiffies, timeout)) + continue; + if (time_after(jiffies, last_jiffies + duration)) + return 0; + continue; + } + + /* unstable, start over */ + last = cur; + last_jiffies = jiffies; + + /* check timeout */ + if (time_after(jiffies, timeout)) + return -EBUSY; + } +} + +/** + * sata_phy_resume - resume SATA phy + * @ap: ATA port to resume SATA phy for + * @params: timing parameters { interval, duratinon, timeout } in msec + * + * Resume SATA phy of @ap and debounce it. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int sata_phy_resume(struct ata_port *ap, const unsigned long *params) +{ + u32 scontrol; + int rc; + + if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) + return rc; + + scontrol = (scontrol & 0x0f0) | 0x300; + + if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) + return rc; + + /* Some PHYs react badly if SStatus is pounded immediately + * after resuming. Delay 200ms before debouncing. + */ + msleep(200); + + return sata_phy_debounce(ap, params); +} + +static void ata_wait_spinup(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + unsigned long end, secs; + int rc; + + /* first, debounce phy if SATA */ + if (ap->cbl == ATA_CBL_SATA) { + rc = sata_phy_debounce(ap, sata_deb_timing_hotplug); + + /* if debounced successfully and offline, no need to wait */ + if ((rc == 0 || rc == -EOPNOTSUPP) && ata_port_offline(ap)) + return; + } + + /* okay, let's give the drive time to spin up */ + end = ehc->i.hotplug_timestamp + ATA_SPINUP_WAIT * HZ / 1000; + secs = ((end - jiffies) + HZ - 1) / HZ; + + if (time_after(jiffies, end)) + return; + + if (secs > 5) + ata_port_printk(ap, KERN_INFO, "waiting for device to spin up " + "(%lu secs)\n", secs); + + schedule_timeout_uninterruptible(end - jiffies); +} + +/** + * ata_std_prereset - prepare for reset + * @ap: ATA port to be reset + * + * @ap is about to be reset. Initialize it. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_std_prereset(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + const unsigned long *timing = sata_ehc_deb_timing(ehc); + int rc; + + /* handle link resume & hotplug spinup */ + if ((ehc->i.flags & ATA_EHI_RESUME_LINK) && + (ap->flags & ATA_FLAG_HRST_TO_RESUME)) + ehc->i.action |= ATA_EH_HARDRESET; + + if ((ehc->i.flags & ATA_EHI_HOTPLUGGED) && + (ap->flags & ATA_FLAG_SKIP_D2H_BSY)) + ata_wait_spinup(ap); + + /* if we're about to do hardreset, nothing more to do */ + if (ehc->i.action & ATA_EH_HARDRESET) + return 0; + + /* if SATA, resume phy */ + if (ap->cbl == ATA_CBL_SATA) { + rc = sata_phy_resume(ap, timing); + if (rc && rc != -EOPNOTSUPP) { + /* phy resume failed */ + ata_port_printk(ap, KERN_WARNING, "failed to resume " + "link for reset (errno=%d)\n", rc); + return rc; + } + } + + /* Wait for !BSY if the controller can wait for the first D2H + * Reg FIS and we don't know that no device is attached. + */ + if (!(ap->flags & ATA_FLAG_SKIP_D2H_BSY) && !ata_port_offline(ap)) + ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + + return 0; +} + +/** + * ata_std_softreset - reset host port via ATA SRST + * @ap: port to reset + * @classes: resulting classes of attached devices + * + * Reset host port using ATA SRST. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_std_softreset(struct ata_port *ap, unsigned int *classes) +{ + unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; + unsigned int devmask = 0, err_mask; + u8 err; + + DPRINTK("ENTER\n"); + + if (ata_port_offline(ap)) { + classes[0] = ATA_DEV_NONE; + goto out; + } + + /* determine if device 0/1 are present */ + if (ata_devchk(ap, 0)) + devmask |= (1 << 0); + if (slave_possible && ata_devchk(ap, 1)) + devmask |= (1 << 1); + + /* select device 0 again */ + ap->ops->dev_select(ap, 0); + + /* issue bus reset */ + DPRINTK("about to softreset, devmask=%x\n", devmask); + err_mask = ata_bus_softreset(ap, devmask); + if (err_mask) { + ata_port_printk(ap, KERN_ERR, "SRST failed (err_mask=0x%x)\n", + err_mask); + return -EIO; + } + + /* determine by signature whether we have ATA or ATAPI devices */ + classes[0] = ata_dev_try_classify(ap, 0, &err); + if (slave_possible && err != 0x81) + classes[1] = ata_dev_try_classify(ap, 1, &err); + + out: + DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]); + return 0; +} + +/** + * sata_std_hardreset - reset host port via SATA phy reset + * @ap: port to reset + * @class: resulting class of attached device + * + * SATA phy-reset host port using DET bits of SControl register. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int sata_std_hardreset(struct ata_port *ap, unsigned int *class) +{ + struct ata_eh_context *ehc = &ap->eh_context; + const unsigned long *timing = sata_ehc_deb_timing(ehc); + u32 scontrol; + int rc; + + DPRINTK("ENTER\n"); + + if (sata_set_spd_needed(ap)) { + /* SATA spec says nothing about how to reconfigure + * spd. To be on the safe side, turn off phy during + * reconfiguration. This works for at least ICH7 AHCI + * and Sil3124. + */ + if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) + return rc; + + scontrol = (scontrol & 0x0f0) | 0x302; + + if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) + return rc; + + sata_set_spd(ap); + } + + /* issue phy wake/reset */ + if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) + return rc; + + scontrol = (scontrol & 0x0f0) | 0x301; + + if ((rc = sata_scr_write_flush(ap, SCR_CONTROL, scontrol))) + return rc; + + /* Couldn't find anything in SATA I/II specs, but AHCI-1.1 + * 10.4.2 says at least 1 ms. + */ + msleep(1); + + /* bring phy back */ + sata_phy_resume(ap, timing); + + /* TODO: phy layer with polling, timeouts, etc. */ + if (ata_port_offline(ap)) { + *class = ATA_DEV_NONE; + DPRINTK("EXIT, link offline\n"); + return 0; + } + + if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { + ata_port_printk(ap, KERN_ERR, + "COMRESET failed (device not ready)\n"); + return -EIO; + } + + ap->ops->dev_select(ap, 0); /* probably unnecessary */ + + *class = ata_dev_try_classify(ap, 0, NULL); + + DPRINTK("EXIT, class=%u\n", *class); + return 0; +} + +/** + * ata_std_postreset - standard postreset callback + * @ap: the target ata_port + * @classes: classes of attached devices + * + * This function is invoked after a successful reset. Note that + * the device might have been reset more than once using + * different reset methods before postreset is invoked. + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_std_postreset(struct ata_port *ap, unsigned int *classes) +{ + u32 serror; + + DPRINTK("ENTER\n"); + + /* print link status */ + sata_print_link_status(ap); + + /* clear SError */ + if (sata_scr_read(ap, SCR_ERROR, &serror) == 0) + sata_scr_write(ap, SCR_ERROR, serror); + + /* re-enable interrupts */ + if (!ap->ops->error_handler) { + /* FIXME: hack. create a hook instead */ + if (ap->ioaddr.ctl_addr) + ata_irq_on(ap); + } + + /* is double-select really necessary? */ + if (classes[0] != ATA_DEV_NONE) + ap->ops->dev_select(ap, 1); + if (classes[1] != ATA_DEV_NONE) + ap->ops->dev_select(ap, 0); + + /* bail out if no device is present */ + if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { + DPRINTK("EXIT, no device\n"); + return; + } + + /* set up device control */ + if (ap->ioaddr.ctl_addr) { + if (ap->flags & ATA_FLAG_MMIO) + writeb(ap->ctl, (void __iomem *) ap->ioaddr.ctl_addr); + else + outb(ap->ctl, ap->ioaddr.ctl_addr); + } + + DPRINTK("EXIT\n"); +} + +/** + * ata_dev_same_device - Determine whether new ID matches configured device + * @dev: device to compare against + * @new_class: class of the new device + * @new_id: IDENTIFY page of the new device + * + * Compare @new_class and @new_id against @dev and determine + * whether @dev is the device indicated by @new_class and + * @new_id. + * + * LOCKING: + * None. + * + * RETURNS: + * 1 if @dev matches @new_class and @new_id, 0 otherwise. + */ +static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class, + const u16 *new_id) +{ + const u16 *old_id = dev->id; + unsigned char model[2][41], serial[2][21]; + u64 new_n_sectors; + + if (dev->class != new_class) { + ata_dev_printk(dev, KERN_INFO, "class mismatch %d != %d\n", + dev->class, new_class); + return 0; + } + + ata_id_c_string(old_id, model[0], ATA_ID_PROD_OFS, sizeof(model[0])); + ata_id_c_string(new_id, model[1], ATA_ID_PROD_OFS, sizeof(model[1])); + ata_id_c_string(old_id, serial[0], ATA_ID_SERNO_OFS, sizeof(serial[0])); + ata_id_c_string(new_id, serial[1], ATA_ID_SERNO_OFS, sizeof(serial[1])); + new_n_sectors = ata_id_n_sectors(new_id); + + if (strcmp(model[0], model[1])) { + ata_dev_printk(dev, KERN_INFO, "model number mismatch " + "'%s' != '%s'\n", model[0], model[1]); + return 0; + } + + if (strcmp(serial[0], serial[1])) { + ata_dev_printk(dev, KERN_INFO, "serial number mismatch " + "'%s' != '%s'\n", serial[0], serial[1]); + return 0; + } + + if (dev->class == ATA_DEV_ATA && dev->n_sectors != new_n_sectors) { + ata_dev_printk(dev, KERN_INFO, "n_sectors mismatch " + "%llu != %llu\n", + (unsigned long long)dev->n_sectors, + (unsigned long long)new_n_sectors); + return 0; + } + + return 1; +} + +/** + * ata_dev_revalidate - Revalidate ATA device + * @dev: device to revalidate + * @post_reset: is this revalidation after reset? + * + * Re-read IDENTIFY page and make sure @dev is still attached to + * the port. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, negative errno otherwise + */ +int ata_dev_revalidate(struct ata_device *dev, int post_reset) +{ + unsigned int class = dev->class; + u16 *id = (void *)dev->ap->sector_buf; + int rc; + + if (!ata_dev_enabled(dev)) { + rc = -ENODEV; + goto fail; + } + + /* read ID data */ + rc = ata_dev_read_id(dev, &class, post_reset, id); + if (rc) + goto fail; + + /* is the device still there? */ + if (!ata_dev_same_device(dev, class, id)) { + rc = -ENODEV; + goto fail; + } + + memcpy(dev->id, id, sizeof(id[0]) * ATA_ID_WORDS); + + /* configure device according to the new ID */ + rc = ata_dev_configure(dev, 0); + if (rc == 0) + return 0; + + fail: + ata_dev_printk(dev, KERN_ERR, "revalidation failed (errno=%d)\n", rc); + return rc; +} + +static const char * const ata_dma_blacklist [] = { + "WDC AC11000H", NULL, + "WDC AC22100H", NULL, + "WDC AC32500H", NULL, + "WDC AC33100H", NULL, + "WDC AC31600H", NULL, + "WDC AC32100H", "24.09P07", + "WDC AC23200L", "21.10N21", + "Compaq CRD-8241B", NULL, + "CRD-8400B", NULL, + "CRD-8480B", NULL, + "CRD-8482B", NULL, + "CRD-84", NULL, + "SanDisk SDP3B", NULL, + "SanDisk SDP3B-64", NULL, + "SANYO CD-ROM CRD", NULL, + "HITACHI CDR-8", NULL, + "HITACHI CDR-8335", NULL, + "HITACHI CDR-8435", NULL, + "Toshiba CD-ROM XM-6202B", NULL, + "TOSHIBA CD-ROM XM-1702BC", NULL, + "CD-532E-A", NULL, + "E-IDE CD-ROM CR-840", NULL, + "CD-ROM Drive/F5A", NULL, + "WPI CDD-820", NULL, + "SAMSUNG CD-ROM SC-148C", NULL, + "SAMSUNG CD-ROM SC", NULL, + "SanDisk SDP3B-64", NULL, + "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL, + "_NEC DV5800A", NULL, + "SAMSUNG CD-ROM SN-124", "N001" +}; + +static int ata_strim(char *s, size_t len) +{ + len = strnlen(s, len); + + /* ATAPI specifies that empty space is blank-filled; remove blanks */ + while ((len > 0) && (s[len - 1] == ' ')) { + len--; + s[len] = 0; + } + return len; +} + +static int ata_dma_blacklisted(const struct ata_device *dev) +{ + unsigned char model_num[40]; + unsigned char model_rev[16]; + unsigned int nlen, rlen; + int i; + + /* We don't support polling DMA. + * DMA blacklist those ATAPI devices with CDB-intr (and use PIO) + * if the LLDD handles only interrupts in the HSM_ST_LAST state. + */ + if ((dev->ap->flags & ATA_FLAG_PIO_POLLING) && + (dev->flags & ATA_DFLAG_CDB_INTR)) + return 1; + + ata_id_string(dev->id, model_num, ATA_ID_PROD_OFS, + sizeof(model_num)); + ata_id_string(dev->id, model_rev, ATA_ID_FW_REV_OFS, + sizeof(model_rev)); + nlen = ata_strim(model_num, sizeof(model_num)); + rlen = ata_strim(model_rev, sizeof(model_rev)); + + for (i = 0; i < ARRAY_SIZE(ata_dma_blacklist); i += 2) { + if (!strncmp(ata_dma_blacklist[i], model_num, nlen)) { + if (ata_dma_blacklist[i+1] == NULL) + return 1; + if (!strncmp(ata_dma_blacklist[i], model_rev, rlen)) + return 1; + } + } + return 0; +} + +/** + * ata_dev_xfermask - Compute supported xfermask of the given device + * @dev: Device to compute xfermask for + * + * Compute supported xfermask of @dev and store it in + * dev->*_mask. This function is responsible for applying all + * known limits including host controller limits, device + * blacklist, etc... + * + * LOCKING: + * None. + */ +static void ata_dev_xfermask(struct ata_device *dev) +{ + struct ata_port *ap = dev->ap; + struct ata_host_set *hs = ap->host_set; + unsigned long xfer_mask; + + /* controller modes available */ + xfer_mask = ata_pack_xfermask(ap->pio_mask, + ap->mwdma_mask, ap->udma_mask); + + /* Apply cable rule here. Don't apply it early because when + * we handle hot plug the cable type can itself change. + */ + if (ap->cbl == ATA_CBL_PATA40) + xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA); + + xfer_mask &= ata_pack_xfermask(dev->pio_mask, + dev->mwdma_mask, dev->udma_mask); + xfer_mask &= ata_id_xfermask(dev->id); + + if (ata_dma_blacklisted(dev)) { + xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + ata_dev_printk(dev, KERN_WARNING, + "device is on DMA blacklist, disabling DMA\n"); + } + + if ((hs->flags & ATA_HOST_SIMPLEX) && hs->simplex_claimed) { + xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + ata_dev_printk(dev, KERN_WARNING, "simplex DMA is claimed by " + "other device, disabling DMA\n"); + } + + if (ap->ops->mode_filter) + xfer_mask = ap->ops->mode_filter(ap, dev, xfer_mask); + + ata_unpack_xfermask(xfer_mask, &dev->pio_mask, + &dev->mwdma_mask, &dev->udma_mask); +} + +/** + * ata_dev_set_xfermode - Issue SET FEATURES - XFER MODE command + * @dev: Device to which command will be sent + * + * Issue SET FEATURES - XFER MODE command to device @dev + * on port @ap. + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * 0 on success, AC_ERR_* mask otherwise. + */ + +static unsigned int ata_dev_set_xfermode(struct ata_device *dev) +{ + struct ata_taskfile tf; + unsigned int err_mask; + + /* set up set-features taskfile */ + DPRINTK("set features - xfer mode\n"); + + ata_tf_init(dev, &tf); + tf.command = ATA_CMD_SET_FEATURES; + tf.feature = SETFEATURES_XFER; + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf.protocol = ATA_PROT_NODATA; + tf.nsect = dev->xfer_mode; + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); + + DPRINTK("EXIT, err_mask=%x\n", err_mask); + return err_mask; +} + +/** + * ata_dev_init_params - Issue INIT DEV PARAMS command + * @dev: Device to which command will be sent + * @heads: Number of heads (taskfile parameter) + * @sectors: Number of sectors (taskfile parameter) + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, AC_ERR_* mask otherwise. + */ +static unsigned int ata_dev_init_params(struct ata_device *dev, + u16 heads, u16 sectors) +{ + struct ata_taskfile tf; + unsigned int err_mask; + + /* Number of sectors per track 1-255. Number of heads 1-16 */ + if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16) + return AC_ERR_INVALID; + + /* set up init dev params taskfile */ + DPRINTK("init dev params \n"); + + ata_tf_init(dev, &tf); + tf.command = ATA_CMD_INIT_DEV_PARAMS; + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf.protocol = ATA_PROT_NODATA; + tf.nsect = sectors; + tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); + + DPRINTK("EXIT, err_mask=%x\n", err_mask); + return err_mask; +} + +/** + * ata_sg_clean - Unmap DMA memory associated with command + * @qc: Command containing DMA memory to be released + * + * Unmap all mapped DMA memory associated with this command. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +static void ata_sg_clean(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct scatterlist *sg = qc->__sg; + int dir = qc->dma_dir; + void *pad_buf = NULL; + + WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP)); + WARN_ON(sg == NULL); + + if (qc->flags & ATA_QCFLAG_SINGLE) + WARN_ON(qc->n_elem > 1); + + VPRINTK("unmapping %u sg elements\n", qc->n_elem); + + /* if we padded the buffer out to 32-bit bound, and data + * xfer direction is from-device, we must copy from the + * pad buffer back into the supplied buffer + */ + if (qc->pad_len && !(qc->tf.flags & ATA_TFLAG_WRITE)) + pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); + + if (qc->flags & ATA_QCFLAG_SG) { + if (qc->n_elem) + dma_unmap_sg(ap->dev, sg, qc->n_elem, dir); + /* restore last sg */ + sg[qc->orig_n_elem - 1].length += qc->pad_len; + if (pad_buf) { + struct scatterlist *psg = &qc->pad_sgent; + void *addr = kmap_atomic(psg->page, KM_IRQ0); + memcpy(addr + psg->offset, pad_buf, qc->pad_len); + kunmap_atomic(addr, KM_IRQ0); + } + } else { + if (qc->n_elem) + dma_unmap_single(ap->dev, + sg_dma_address(&sg[0]), sg_dma_len(&sg[0]), + dir); + /* restore sg */ + sg->length += qc->pad_len; + if (pad_buf) + memcpy(qc->buf_virt + sg->length - qc->pad_len, + pad_buf, qc->pad_len); + } + + qc->flags &= ~ATA_QCFLAG_DMAMAP; + qc->__sg = NULL; +} + +/** + * ata_fill_sg - Fill PCI IDE PRD table + * @qc: Metadata associated with taskfile to be transferred + * + * Fill PCI IDE PRD (scatter-gather) table with segments + * associated with the current disk command. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + */ +static void ata_fill_sg(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct scatterlist *sg; + unsigned int idx; + + WARN_ON(qc->__sg == NULL); + WARN_ON(qc->n_elem == 0 && qc->pad_len == 0); + + idx = 0; + ata_for_each_sg(sg, qc) { + u32 addr, offset; + u32 sg_len, len; + + /* determine if physical DMA addr spans 64K boundary. + * Note h/w doesn't support 64-bit, so we unconditionally + * truncate dma_addr_t to u32. + */ + addr = (u32) sg_dma_address(sg); + sg_len = sg_dma_len(sg); + + while (sg_len) { + offset = addr & 0xffff; + len = sg_len; + if ((offset + sg_len) > 0x10000) + len = 0x10000 - offset; + + ap->prd[idx].addr = cpu_to_le32(addr); + ap->prd[idx].flags_len = cpu_to_le32(len & 0xffff); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len); + + idx++; + sg_len -= len; + addr += len; + } + } + + if (idx) + ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); +} +/** + * ata_check_atapi_dma - Check whether ATAPI DMA can be supported + * @qc: Metadata associated with taskfile to check + * + * Allow low-level driver to filter ATA PACKET commands, returning + * a status indicating whether or not it is OK to use DMA for the + * supplied PACKET command. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: 0 when ATAPI DMA can be used + * nonzero otherwise + */ +int ata_check_atapi_dma(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + int rc = 0; /* Assume ATAPI DMA is OK by default */ + + if (ap->ops->check_atapi_dma) + rc = ap->ops->check_atapi_dma(qc); + + return rc; +} +/** + * ata_qc_prep - Prepare taskfile for submission + * @qc: Metadata associated with taskfile to be prepared + * + * Prepare ATA taskfile for submission. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +void ata_qc_prep(struct ata_queued_cmd *qc) +{ + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) + return; + + ata_fill_sg(qc); +} + +void ata_noop_qc_prep(struct ata_queued_cmd *qc) { } + +/** + * ata_sg_init_one - Associate command with memory buffer + * @qc: Command to be associated + * @buf: Memory buffer + * @buflen: Length of memory buffer, in bytes. + * + * Initialize the data-related elements of queued_cmd @qc + * to point to a single memory buffer, @buf of byte length @buflen. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) +{ + struct scatterlist *sg; + + qc->flags |= ATA_QCFLAG_SINGLE; + + memset(&qc->sgent, 0, sizeof(qc->sgent)); + qc->__sg = &qc->sgent; + qc->n_elem = 1; + qc->orig_n_elem = 1; + qc->buf_virt = buf; + qc->nbytes = buflen; + + sg = qc->__sg; + sg_init_one(sg, buf, buflen); +} + +/** + * ata_sg_init - Associate command with scatter-gather table. + * @qc: Command to be associated + * @sg: Scatter-gather table. + * @n_elem: Number of elements in s/g table. + * + * Initialize the data-related elements of queued_cmd @qc + * to point to a scatter-gather table @sg, containing @n_elem + * elements. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, + unsigned int n_elem) +{ + qc->flags |= ATA_QCFLAG_SG; + qc->__sg = sg; + qc->n_elem = n_elem; + qc->orig_n_elem = n_elem; +} + +/** + * ata_sg_setup_one - DMA-map the memory buffer associated with a command. + * @qc: Command with memory buffer to be mapped. + * + * DMA-map the memory buffer associated with queued_cmd @qc. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Zero on success, negative on error. + */ + +static int ata_sg_setup_one(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + int dir = qc->dma_dir; + struct scatterlist *sg = qc->__sg; + dma_addr_t dma_address; + int trim_sg = 0; + + /* we must lengthen transfers to end on a 32-bit boundary */ + qc->pad_len = sg->length & 3; + if (qc->pad_len) { + void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); + struct scatterlist *psg = &qc->pad_sgent; + + WARN_ON(qc->dev->class != ATA_DEV_ATAPI); + + memset(pad_buf, 0, ATA_DMA_PAD_SZ); + + if (qc->tf.flags & ATA_TFLAG_WRITE) + memcpy(pad_buf, qc->buf_virt + sg->length - qc->pad_len, + qc->pad_len); + + sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ); + sg_dma_len(psg) = ATA_DMA_PAD_SZ; + /* trim sg */ + sg->length -= qc->pad_len; + if (sg->length == 0) + trim_sg = 1; + + DPRINTK("padding done, sg->length=%u pad_len=%u\n", + sg->length, qc->pad_len); + } + + if (trim_sg) { + qc->n_elem--; + goto skip_map; + } + + dma_address = dma_map_single(ap->dev, qc->buf_virt, + sg->length, dir); + if (dma_mapping_error(dma_address)) { + /* restore sg */ + sg->length += qc->pad_len; + return -1; + } + + sg_dma_address(sg) = dma_address; + sg_dma_len(sg) = sg->length; + +skip_map: + DPRINTK("mapped buffer of %d bytes for %s\n", sg_dma_len(sg), + qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); + + return 0; +} + +/** + * ata_sg_setup - DMA-map the scatter-gather table associated with a command. + * @qc: Command with scatter-gather table to be mapped. + * + * DMA-map the scatter-gather table associated with queued_cmd @qc. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Zero on success, negative on error. + * + */ + +static int ata_sg_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct scatterlist *sg = qc->__sg; + struct scatterlist *lsg = &sg[qc->n_elem - 1]; + int n_elem, pre_n_elem, dir, trim_sg = 0; + + VPRINTK("ENTER, ata%u\n", ap->id); + WARN_ON(!(qc->flags & ATA_QCFLAG_SG)); + + /* we must lengthen transfers to end on a 32-bit boundary */ + qc->pad_len = lsg->length & 3; + if (qc->pad_len) { + void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); + struct scatterlist *psg = &qc->pad_sgent; + unsigned int offset; + + WARN_ON(qc->dev->class != ATA_DEV_ATAPI); + + memset(pad_buf, 0, ATA_DMA_PAD_SZ); + + /* + * psg->page/offset are used to copy to-be-written + * data in this function or read data in ata_sg_clean. + */ + offset = lsg->offset + lsg->length - qc->pad_len; + psg->page = nth_page(lsg->page, offset >> PAGE_SHIFT); + psg->offset = offset_in_page(offset); + + if (qc->tf.flags & ATA_TFLAG_WRITE) { + void *addr = kmap_atomic(psg->page, KM_IRQ0); + memcpy(pad_buf, addr + psg->offset, qc->pad_len); + kunmap_atomic(addr, KM_IRQ0); + } + + sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ); + sg_dma_len(psg) = ATA_DMA_PAD_SZ; + /* trim last sg */ + lsg->length -= qc->pad_len; + if (lsg->length == 0) + trim_sg = 1; + + DPRINTK("padding done, sg[%d].length=%u pad_len=%u\n", + qc->n_elem - 1, lsg->length, qc->pad_len); + } + + pre_n_elem = qc->n_elem; + if (trim_sg && pre_n_elem) + pre_n_elem--; + + if (!pre_n_elem) { + n_elem = 0; + goto skip_map; + } + + dir = qc->dma_dir; + n_elem = dma_map_sg(ap->dev, sg, pre_n_elem, dir); + if (n_elem < 1) { + /* restore last sg */ + lsg->length += qc->pad_len; + return -1; + } + + DPRINTK("%d sg elements mapped\n", n_elem); + +skip_map: + qc->n_elem = n_elem; + + return 0; +} + +/** + * swap_buf_le16 - swap halves of 16-bit words in place + * @buf: Buffer to swap + * @buf_words: Number of 16-bit words in buffer. + * + * Swap halves of 16-bit words if needed to convert from + * little-endian byte order to native cpu byte order, or + * vice-versa. + * + * LOCKING: + * Inherited from caller. + */ +void swap_buf_le16(u16 *buf, unsigned int buf_words) +{ +#ifdef __BIG_ENDIAN + unsigned int i; + + for (i = 0; i < buf_words; i++) + buf[i] = le16_to_cpu(buf[i]); +#endif /* __BIG_ENDIAN */ +} + +/** + * ata_mmio_data_xfer - Transfer data by MMIO + * @adev: device for this I/O + * @buf: data buffer + * @buflen: buffer length + * @write_data: read/write + * + * Transfer data from/to the device data register by MMIO. + * + * LOCKING: + * Inherited from caller. + */ + +void ata_mmio_data_xfer(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int write_data) +{ + struct ata_port *ap = adev->ap; + unsigned int i; + unsigned int words = buflen >> 1; + u16 *buf16 = (u16 *) buf; + void __iomem *mmio = (void __iomem *)ap->ioaddr.data_addr; + + /* Transfer multiple of 2 bytes */ + if (write_data) { + for (i = 0; i < words; i++) + writew(le16_to_cpu(buf16[i]), mmio); + } else { + for (i = 0; i < words; i++) + buf16[i] = cpu_to_le16(readw(mmio)); + } + + /* Transfer trailing 1 byte, if any. */ + if (unlikely(buflen & 0x01)) { + u16 align_buf[1] = { 0 }; + unsigned char *trailing_buf = buf + buflen - 1; + + if (write_data) { + memcpy(align_buf, trailing_buf, 1); + writew(le16_to_cpu(align_buf[0]), mmio); + } else { + align_buf[0] = cpu_to_le16(readw(mmio)); + memcpy(trailing_buf, align_buf, 1); + } + } +} + +/** + * ata_pio_data_xfer - Transfer data by PIO + * @adev: device to target + * @buf: data buffer + * @buflen: buffer length + * @write_data: read/write + * + * Transfer data from/to the device data register by PIO. + * + * LOCKING: + * Inherited from caller. + */ + +void ata_pio_data_xfer(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int write_data) +{ + struct ata_port *ap = adev->ap; + unsigned int words = buflen >> 1; + + /* Transfer multiple of 2 bytes */ + if (write_data) + outsw(ap->ioaddr.data_addr, buf, words); + else + insw(ap->ioaddr.data_addr, buf, words); + + /* Transfer trailing 1 byte, if any. */ + if (unlikely(buflen & 0x01)) { + u16 align_buf[1] = { 0 }; + unsigned char *trailing_buf = buf + buflen - 1; + + if (write_data) { + memcpy(align_buf, trailing_buf, 1); + outw(le16_to_cpu(align_buf[0]), ap->ioaddr.data_addr); + } else { + align_buf[0] = cpu_to_le16(inw(ap->ioaddr.data_addr)); + memcpy(trailing_buf, align_buf, 1); + } + } +} + +/** + * ata_pio_data_xfer_noirq - Transfer data by PIO + * @adev: device to target + * @buf: data buffer + * @buflen: buffer length + * @write_data: read/write + * + * Transfer data from/to the device data register by PIO. Do the + * transfer with interrupts disabled. + * + * LOCKING: + * Inherited from caller. + */ + +void ata_pio_data_xfer_noirq(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int write_data) +{ + unsigned long flags; + local_irq_save(flags); + ata_pio_data_xfer(adev, buf, buflen, write_data); + local_irq_restore(flags); +} + + +/** + * ata_pio_sector - Transfer ATA_SECT_SIZE (512 bytes) of data. + * @qc: Command on going + * + * Transfer ATA_SECT_SIZE of data from/to the ATA device. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_pio_sector(struct ata_queued_cmd *qc) +{ + int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); + struct scatterlist *sg = qc->__sg; + struct ata_port *ap = qc->ap; + struct page *page; + unsigned int offset; + unsigned char *buf; + + if (qc->cursect == (qc->nsect - 1)) + ap->hsm_task_state = HSM_ST_LAST; + + page = sg[qc->cursg].page; + offset = sg[qc->cursg].offset + qc->cursg_ofs * ATA_SECT_SIZE; + + /* get the current page and offset */ + page = nth_page(page, (offset >> PAGE_SHIFT)); + offset %= PAGE_SIZE; + + DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); + + if (PageHighMem(page)) { + unsigned long flags; + + /* FIXME: use a bounce buffer */ + local_irq_save(flags); + buf = kmap_atomic(page, KM_IRQ0); + + /* do the actual data transfer */ + ap->ops->data_xfer(qc->dev, buf + offset, ATA_SECT_SIZE, do_write); + + kunmap_atomic(buf, KM_IRQ0); + local_irq_restore(flags); + } else { + buf = page_address(page); + ap->ops->data_xfer(qc->dev, buf + offset, ATA_SECT_SIZE, do_write); + } + + qc->cursect++; + qc->cursg_ofs++; + + if ((qc->cursg_ofs * ATA_SECT_SIZE) == (&sg[qc->cursg])->length) { + qc->cursg++; + qc->cursg_ofs = 0; + } +} + +/** + * ata_pio_sectors - Transfer one or many 512-byte sectors. + * @qc: Command on going + * + * Transfer one or many ATA_SECT_SIZE of data from/to the + * ATA device for the DRQ request. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_pio_sectors(struct ata_queued_cmd *qc) +{ + if (is_multi_taskfile(&qc->tf)) { + /* READ/WRITE MULTIPLE */ + unsigned int nsect; + + WARN_ON(qc->dev->multi_count == 0); + + nsect = min(qc->nsect - qc->cursect, qc->dev->multi_count); + while (nsect--) + ata_pio_sector(qc); + } else + ata_pio_sector(qc); +} + +/** + * atapi_send_cdb - Write CDB bytes to hardware + * @ap: Port to which ATAPI device is attached. + * @qc: Taskfile currently active + * + * When device has indicated its readiness to accept + * a CDB, this function is called. Send the CDB. + * + * LOCKING: + * caller. + */ + +static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) +{ + /* send SCSI cdb */ + DPRINTK("send cdb\n"); + WARN_ON(qc->dev->cdb_len < 12); + + ap->ops->data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1); + ata_altstatus(ap); /* flush */ + + switch (qc->tf.protocol) { + case ATA_PROT_ATAPI: + ap->hsm_task_state = HSM_ST; + break; + case ATA_PROT_ATAPI_NODATA: + ap->hsm_task_state = HSM_ST_LAST; + break; + case ATA_PROT_ATAPI_DMA: + ap->hsm_task_state = HSM_ST_LAST; + /* initiate bmdma */ + ap->ops->bmdma_start(qc); + break; + } +} + +/** + * __atapi_pio_bytes - Transfer data from/to the ATAPI device. + * @qc: Command on going + * @bytes: number of bytes + * + * Transfer Transfer data from/to the ATAPI device. + * + * LOCKING: + * Inherited from caller. + * + */ + +static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) +{ + int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); + struct scatterlist *sg = qc->__sg; + struct ata_port *ap = qc->ap; + struct page *page; + unsigned char *buf; + unsigned int offset, count; + + if (qc->curbytes + bytes >= qc->nbytes) + ap->hsm_task_state = HSM_ST_LAST; + +next_sg: + if (unlikely(qc->cursg >= qc->n_elem)) { + /* + * The end of qc->sg is reached and the device expects + * more data to transfer. In order not to overrun qc->sg + * and fulfill length specified in the byte count register, + * - for read case, discard trailing data from the device + * - for write case, padding zero data to the device + */ + u16 pad_buf[1] = { 0 }; + unsigned int words = bytes >> 1; + unsigned int i; + + if (words) /* warning if bytes > 1 */ + ata_dev_printk(qc->dev, KERN_WARNING, + "%u bytes trailing data\n", bytes); + + for (i = 0; i < words; i++) + ap->ops->data_xfer(qc->dev, (unsigned char*)pad_buf, 2, do_write); + + ap->hsm_task_state = HSM_ST_LAST; + return; + } + + sg = &qc->__sg[qc->cursg]; + + page = sg->page; + offset = sg->offset + qc->cursg_ofs; + + /* get the current page and offset */ + page = nth_page(page, (offset >> PAGE_SHIFT)); + offset %= PAGE_SIZE; + + /* don't overrun current sg */ + count = min(sg->length - qc->cursg_ofs, bytes); + + /* don't cross page boundaries */ + count = min(count, (unsigned int)PAGE_SIZE - offset); + + DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); + + if (PageHighMem(page)) { + unsigned long flags; + + /* FIXME: use bounce buffer */ + local_irq_save(flags); + buf = kmap_atomic(page, KM_IRQ0); + + /* do the actual data transfer */ + ap->ops->data_xfer(qc->dev, buf + offset, count, do_write); + + kunmap_atomic(buf, KM_IRQ0); + local_irq_restore(flags); + } else { + buf = page_address(page); + ap->ops->data_xfer(qc->dev, buf + offset, count, do_write); + } + + bytes -= count; + qc->curbytes += count; + qc->cursg_ofs += count; + + if (qc->cursg_ofs == sg->length) { + qc->cursg++; + qc->cursg_ofs = 0; + } + + if (bytes) + goto next_sg; +} + +/** + * atapi_pio_bytes - Transfer data from/to the ATAPI device. + * @qc: Command on going + * + * Transfer Transfer data from/to the ATAPI device. + * + * LOCKING: + * Inherited from caller. + */ + +static void atapi_pio_bytes(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *dev = qc->dev; + unsigned int ireason, bc_lo, bc_hi, bytes; + int i_write, do_write = (qc->tf.flags & ATA_TFLAG_WRITE) ? 1 : 0; + + /* Abuse qc->result_tf for temp storage of intermediate TF + * here to save some kernel stack usage. + * For normal completion, qc->result_tf is not relevant. For + * error, qc->result_tf is later overwritten by ata_qc_complete(). + * So, the correctness of qc->result_tf is not affected. + */ + ap->ops->tf_read(ap, &qc->result_tf); + ireason = qc->result_tf.nsect; + bc_lo = qc->result_tf.lbam; + bc_hi = qc->result_tf.lbah; + bytes = (bc_hi << 8) | bc_lo; + + /* shall be cleared to zero, indicating xfer of data */ + if (ireason & (1 << 0)) + goto err_out; + + /* make sure transfer direction matches expected */ + i_write = ((ireason & (1 << 1)) == 0) ? 1 : 0; + if (do_write != i_write) + goto err_out; + + VPRINTK("ata%u: xfering %d bytes\n", ap->id, bytes); + + __atapi_pio_bytes(qc, bytes); + + return; + +err_out: + ata_dev_printk(dev, KERN_INFO, "ATAPI check failed\n"); + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; +} + +/** + * ata_hsm_ok_in_wq - Check if the qc can be handled in the workqueue. + * @ap: the target ata_port + * @qc: qc on going + * + * RETURNS: + * 1 if ok in workqueue, 0 otherwise. + */ + +static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *qc) +{ + if (qc->tf.flags & ATA_TFLAG_POLLING) + return 1; + + if (ap->hsm_task_state == HSM_ST_FIRST) { + if (qc->tf.protocol == ATA_PROT_PIO && + (qc->tf.flags & ATA_TFLAG_WRITE)) + return 1; + + if (is_atapi_taskfile(&qc->tf) && + !(qc->dev->flags & ATA_DFLAG_CDB_INTR)) + return 1; + } + + return 0; +} + +/** + * ata_hsm_qc_complete - finish a qc running on standard HSM + * @qc: Command to complete + * @in_wq: 1 if called from workqueue, 0 otherwise + * + * Finish @qc which is running on standard HSM. + * + * LOCKING: + * If @in_wq is zero, spin_lock_irqsave(host_set lock). + * Otherwise, none on entry and grabs host lock. + */ +static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) +{ + struct ata_port *ap = qc->ap; + unsigned long flags; + + if (ap->ops->error_handler) { + if (in_wq) { + spin_lock_irqsave(ap->lock, flags); + + /* EH might have kicked in while host_set lock + * is released. + */ + qc = ata_qc_from_tag(ap, qc->tag); + if (qc) { + if (likely(!(qc->err_mask & AC_ERR_HSM))) { + ata_irq_on(ap); + ata_qc_complete(qc); + } else + ata_port_freeze(ap); + } + + spin_unlock_irqrestore(ap->lock, flags); + } else { + if (likely(!(qc->err_mask & AC_ERR_HSM))) + ata_qc_complete(qc); + else + ata_port_freeze(ap); + } + } else { + if (in_wq) { + spin_lock_irqsave(ap->lock, flags); + ata_irq_on(ap); + ata_qc_complete(qc); + spin_unlock_irqrestore(ap->lock, flags); + } else + ata_qc_complete(qc); + } + + ata_altstatus(ap); /* flush */ +} + +/** + * ata_hsm_move - move the HSM to the next state. + * @ap: the target ata_port + * @qc: qc on going + * @status: current device status + * @in_wq: 1 if called from workqueue, 0 otherwise + * + * RETURNS: + * 1 when poll next status needed, 0 otherwise. + */ +int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, + u8 status, int in_wq) +{ + unsigned long flags = 0; + int poll_next; + + WARN_ON((qc->flags & ATA_QCFLAG_ACTIVE) == 0); + + /* Make sure ata_qc_issue_prot() does not throw things + * like DMA polling into the workqueue. Notice that + * in_wq is not equivalent to (qc->tf.flags & ATA_TFLAG_POLLING). + */ + WARN_ON(in_wq != ata_hsm_ok_in_wq(ap, qc)); + +fsm_start: + DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n", + ap->id, qc->tf.protocol, ap->hsm_task_state, status); + + switch (ap->hsm_task_state) { + case HSM_ST_FIRST: + /* Send first data block or PACKET CDB */ + + /* If polling, we will stay in the work queue after + * sending the data. Otherwise, interrupt handler + * takes over after sending the data. + */ + poll_next = (qc->tf.flags & ATA_TFLAG_POLLING); + + /* check device status */ + if (unlikely((status & ATA_DRQ) == 0)) { + /* handle BSY=0, DRQ=0 as error */ + if (likely(status & (ATA_ERR | ATA_DF))) + /* device stops HSM for abort/error */ + qc->err_mask |= AC_ERR_DEV; + else + /* HSM violation. Let EH handle this */ + qc->err_mask |= AC_ERR_HSM; + + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + /* Device should not ask for data transfer (DRQ=1) + * when it finds something wrong. + * We ignore DRQ here and stop the HSM by + * changing hsm_task_state to HSM_ST_ERR and + * let the EH abort the command or reset the device. + */ + if (unlikely(status & (ATA_ERR | ATA_DF))) { + printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n", + ap->id, status); + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + /* Send the CDB (atapi) or the first data block (ata pio out). + * During the state transition, interrupt handler shouldn't + * be invoked before the data transfer is complete and + * hsm_task_state is changed. Hence, the following locking. + */ + if (in_wq) + spin_lock_irqsave(ap->lock, flags); + + if (qc->tf.protocol == ATA_PROT_PIO) { + /* PIO data out protocol. + * send first data block. + */ + + /* ata_pio_sectors() might change the state + * to HSM_ST_LAST. so, the state is changed here + * before ata_pio_sectors(). + */ + ap->hsm_task_state = HSM_ST; + ata_pio_sectors(qc); + ata_altstatus(ap); /* flush */ + } else + /* send CDB */ + atapi_send_cdb(ap, qc); + + if (in_wq) + spin_unlock_irqrestore(ap->lock, flags); + + /* if polling, ata_pio_task() handles the rest. + * otherwise, interrupt handler takes over from here. + */ + break; + + case HSM_ST: + /* complete command or read/write the data register */ + if (qc->tf.protocol == ATA_PROT_ATAPI) { + /* ATAPI PIO protocol */ + if ((status & ATA_DRQ) == 0) { + /* No more data to transfer or device error. + * Device error will be tagged in HSM_ST_LAST. + */ + ap->hsm_task_state = HSM_ST_LAST; + goto fsm_start; + } + + /* Device should not ask for data transfer (DRQ=1) + * when it finds something wrong. + * We ignore DRQ here and stop the HSM by + * changing hsm_task_state to HSM_ST_ERR and + * let the EH abort the command or reset the device. + */ + if (unlikely(status & (ATA_ERR | ATA_DF))) { + printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n", + ap->id, status); + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + atapi_pio_bytes(qc); + + if (unlikely(ap->hsm_task_state == HSM_ST_ERR)) + /* bad ireason reported by device */ + goto fsm_start; + + } else { + /* ATA PIO protocol */ + if (unlikely((status & ATA_DRQ) == 0)) { + /* handle BSY=0, DRQ=0 as error */ + if (likely(status & (ATA_ERR | ATA_DF))) + /* device stops HSM for abort/error */ + qc->err_mask |= AC_ERR_DEV; + else + /* HSM violation. Let EH handle this */ + qc->err_mask |= AC_ERR_HSM; + + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + /* For PIO reads, some devices may ask for + * data transfer (DRQ=1) alone with ERR=1. + * We respect DRQ here and transfer one + * block of junk data before changing the + * hsm_task_state to HSM_ST_ERR. + * + * For PIO writes, ERR=1 DRQ=1 doesn't make + * sense since the data block has been + * transferred to the device. + */ + if (unlikely(status & (ATA_ERR | ATA_DF))) { + /* data might be corrputed */ + qc->err_mask |= AC_ERR_DEV; + + if (!(qc->tf.flags & ATA_TFLAG_WRITE)) { + ata_pio_sectors(qc); + ata_altstatus(ap); + status = ata_wait_idle(ap); + } + + if (status & (ATA_BUSY | ATA_DRQ)) + qc->err_mask |= AC_ERR_HSM; + + /* ata_pio_sectors() might change the + * state to HSM_ST_LAST. so, the state + * is changed after ata_pio_sectors(). + */ + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + ata_pio_sectors(qc); + + if (ap->hsm_task_state == HSM_ST_LAST && + (!(qc->tf.flags & ATA_TFLAG_WRITE))) { + /* all data read */ + ata_altstatus(ap); + status = ata_wait_idle(ap); + goto fsm_start; + } + } + + ata_altstatus(ap); /* flush */ + poll_next = 1; + break; + + case HSM_ST_LAST: + if (unlikely(!ata_ok(status))) { + qc->err_mask |= __ac_err_mask(status); + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + /* no more data to transfer */ + DPRINTK("ata%u: dev %u command complete, drv_stat 0x%x\n", + ap->id, qc->dev->devno, status); + + WARN_ON(qc->err_mask); + + ap->hsm_task_state = HSM_ST_IDLE; + + /* complete taskfile transaction */ + ata_hsm_qc_complete(qc, in_wq); + + poll_next = 0; + break; + + case HSM_ST_ERR: + /* make sure qc->err_mask is available to + * know what's wrong and recover + */ + WARN_ON(qc->err_mask == 0); + + ap->hsm_task_state = HSM_ST_IDLE; + + /* complete taskfile transaction */ + ata_hsm_qc_complete(qc, in_wq); + + poll_next = 0; + break; + default: + poll_next = 0; + BUG(); + } + + return poll_next; +} + +static void ata_pio_task(void *_data) +{ + struct ata_queued_cmd *qc = _data; + struct ata_port *ap = qc->ap; + u8 status; + int poll_next; + +fsm_start: + WARN_ON(ap->hsm_task_state == HSM_ST_IDLE); + + /* + * This is purely heuristic. This is a fast path. + * Sometimes when we enter, BSY will be cleared in + * a chk-status or two. If not, the drive is probably seeking + * or something. Snooze for a couple msecs, then + * chk-status again. If still busy, queue delayed work. + */ + status = ata_busy_wait(ap, ATA_BUSY, 5); + if (status & ATA_BUSY) { + msleep(2); + status = ata_busy_wait(ap, ATA_BUSY, 10); + if (status & ATA_BUSY) { + ata_port_queue_task(ap, ata_pio_task, qc, ATA_SHORT_PAUSE); + return; + } + } + + /* move the HSM */ + poll_next = ata_hsm_move(ap, qc, status, 1); + + /* another command or interrupt handler + * may be running at this point. + */ + if (poll_next) + goto fsm_start; +} + +/** + * ata_qc_new - Request an available ATA command, for queueing + * @ap: Port associated with device @dev + * @dev: Device from whom we request an available command structure + * + * LOCKING: + * None. + */ + +static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) +{ + struct ata_queued_cmd *qc = NULL; + unsigned int i; + + /* no command while frozen */ + if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) + return NULL; + + /* the last tag is reserved for internal command. */ + for (i = 0; i < ATA_MAX_QUEUE - 1; i++) + if (!test_and_set_bit(i, &ap->qc_allocated)) { + qc = __ata_qc_from_tag(ap, i); + break; + } + + if (qc) + qc->tag = i; + + return qc; +} + +/** + * ata_qc_new_init - Request an available ATA command, and initialize it + * @dev: Device from whom we request an available command structure + * + * LOCKING: + * None. + */ + +struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev) +{ + struct ata_port *ap = dev->ap; + struct ata_queued_cmd *qc; + + qc = ata_qc_new(ap); + if (qc) { + qc->scsicmd = NULL; + qc->ap = ap; + qc->dev = dev; + + ata_qc_reinit(qc); + } + + return qc; +} + +/** + * ata_qc_free - free unused ata_queued_cmd + * @qc: Command to complete + * + * Designed to free unused ata_queued_cmd object + * in case something prevents using it. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +void ata_qc_free(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned int tag; + + WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ + + qc->flags = 0; + tag = qc->tag; + if (likely(ata_tag_valid(tag))) { + qc->tag = ATA_TAG_POISON; + clear_bit(tag, &ap->qc_allocated); + } +} + +void __ata_qc_complete(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ + WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); + + if (likely(qc->flags & ATA_QCFLAG_DMAMAP)) + ata_sg_clean(qc); + + /* command should be marked inactive atomically with qc completion */ + if (qc->tf.protocol == ATA_PROT_NCQ) + ap->sactive &= ~(1 << qc->tag); + else + ap->active_tag = ATA_TAG_POISON; + + /* atapi: mark qc as inactive to prevent the interrupt handler + * from completing the command twice later, before the error handler + * is called. (when rc != 0 and atapi request sense is needed) + */ + qc->flags &= ~ATA_QCFLAG_ACTIVE; + ap->qc_active &= ~(1 << qc->tag); + + /* call completion callback */ + qc->complete_fn(qc); +} + +/** + * ata_qc_complete - Complete an active ATA command + * @qc: Command to complete + * @err_mask: ATA Status register contents + * + * Indicate to the mid and upper layers that an ATA + * command has completed, with either an ok or not-ok status. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +void ata_qc_complete(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + /* XXX: New EH and old EH use different mechanisms to + * synchronize EH with regular execution path. + * + * In new EH, a failed qc is marked with ATA_QCFLAG_FAILED. + * Normal execution path is responsible for not accessing a + * failed qc. libata core enforces the rule by returning NULL + * from ata_qc_from_tag() for failed qcs. + * + * Old EH depends on ata_qc_complete() nullifying completion + * requests if ATA_QCFLAG_EH_SCHEDULED is set. Old EH does + * not synchronize with interrupt handler. Only PIO task is + * taken care of. + */ + if (ap->ops->error_handler) { + WARN_ON(ap->pflags & ATA_PFLAG_FROZEN); + + if (unlikely(qc->err_mask)) + qc->flags |= ATA_QCFLAG_FAILED; + + if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) { + if (!ata_tag_internal(qc->tag)) { + /* always fill result TF for failed qc */ + ap->ops->tf_read(ap, &qc->result_tf); + ata_qc_schedule_eh(qc); + return; + } + } + + /* read result TF if requested */ + if (qc->flags & ATA_QCFLAG_RESULT_TF) + ap->ops->tf_read(ap, &qc->result_tf); + + __ata_qc_complete(qc); + } else { + if (qc->flags & ATA_QCFLAG_EH_SCHEDULED) + return; + + /* read result TF if failed or requested */ + if (qc->err_mask || qc->flags & ATA_QCFLAG_RESULT_TF) + ap->ops->tf_read(ap, &qc->result_tf); + + __ata_qc_complete(qc); + } +} + +/** + * ata_qc_complete_multiple - Complete multiple qcs successfully + * @ap: port in question + * @qc_active: new qc_active mask + * @finish_qc: LLDD callback invoked before completing a qc + * + * Complete in-flight commands. This functions is meant to be + * called from low-level driver's interrupt routine to complete + * requests normally. ap->qc_active and @qc_active is compared + * and commands are completed accordingly. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Number of completed commands on success, -errno otherwise. + */ +int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active, + void (*finish_qc)(struct ata_queued_cmd *)) +{ + int nr_done = 0; + u32 done_mask; + int i; + + done_mask = ap->qc_active ^ qc_active; + + if (unlikely(done_mask & qc_active)) { + ata_port_printk(ap, KERN_ERR, "illegal qc_active transition " + "(%08x->%08x)\n", ap->qc_active, qc_active); + return -EINVAL; + } + + for (i = 0; i < ATA_MAX_QUEUE; i++) { + struct ata_queued_cmd *qc; + + if (!(done_mask & (1 << i))) + continue; + + if ((qc = ata_qc_from_tag(ap, i))) { + if (finish_qc) + finish_qc(qc); + ata_qc_complete(qc); + nr_done++; + } + } + + return nr_done; +} + +static inline int ata_should_dma_map(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + switch (qc->tf.protocol) { + case ATA_PROT_NCQ: + case ATA_PROT_DMA: + case ATA_PROT_ATAPI_DMA: + return 1; + + case ATA_PROT_ATAPI: + case ATA_PROT_PIO: + if (ap->flags & ATA_FLAG_PIO_DMA) + return 1; + + /* fall through */ + + default: + return 0; + } + + /* never reached */ +} + +/** + * ata_qc_issue - issue taskfile to device + * @qc: command to issue to device + * + * Prepare an ATA command to submission to device. + * This includes mapping the data into a DMA-able + * area, filling in the S/G table, and finally + * writing the taskfile to hardware, starting the command. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +void ata_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + /* Make sure only one non-NCQ command is outstanding. The + * check is skipped for old EH because it reuses active qc to + * request ATAPI sense. + */ + WARN_ON(ap->ops->error_handler && ata_tag_valid(ap->active_tag)); + + if (qc->tf.protocol == ATA_PROT_NCQ) { + WARN_ON(ap->sactive & (1 << qc->tag)); + ap->sactive |= 1 << qc->tag; + } else { + WARN_ON(ap->sactive); + ap->active_tag = qc->tag; + } + + qc->flags |= ATA_QCFLAG_ACTIVE; + ap->qc_active |= 1 << qc->tag; + + if (ata_should_dma_map(qc)) { + if (qc->flags & ATA_QCFLAG_SG) { + if (ata_sg_setup(qc)) + goto sg_err; + } else if (qc->flags & ATA_QCFLAG_SINGLE) { + if (ata_sg_setup_one(qc)) + goto sg_err; + } + } else { + qc->flags &= ~ATA_QCFLAG_DMAMAP; + } + + ap->ops->qc_prep(qc); + + qc->err_mask |= ap->ops->qc_issue(qc); + if (unlikely(qc->err_mask)) + goto err; + return; + +sg_err: + qc->flags &= ~ATA_QCFLAG_DMAMAP; + qc->err_mask |= AC_ERR_SYSTEM; +err: + ata_qc_complete(qc); +} + +/** + * ata_qc_issue_prot - issue taskfile to device in proto-dependent manner + * @qc: command to issue to device + * + * Using various libata functions and hooks, this function + * starts an ATA command. ATA commands are grouped into + * classes called "protocols", and issuing each type of protocol + * is slightly different. + * + * May be used as the qc_issue() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Zero on success, AC_ERR_* mask on failure + */ + +unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + /* Use polling pio if the LLD doesn't handle + * interrupt driven pio and atapi CDB interrupt. + */ + if (ap->flags & ATA_FLAG_PIO_POLLING) { + switch (qc->tf.protocol) { + case ATA_PROT_PIO: + case ATA_PROT_ATAPI: + case ATA_PROT_ATAPI_NODATA: + qc->tf.flags |= ATA_TFLAG_POLLING; + break; + case ATA_PROT_ATAPI_DMA: + if (qc->dev->flags & ATA_DFLAG_CDB_INTR) + /* see ata_dma_blacklisted() */ + BUG(); + break; + default: + break; + } + } + + /* select the device */ + ata_dev_select(ap, qc->dev->devno, 1, 0); + + /* start the command */ + switch (qc->tf.protocol) { + case ATA_PROT_NODATA: + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_qc_set_polling(qc); + + ata_tf_to_host(ap, &qc->tf); + ap->hsm_task_state = HSM_ST_LAST; + + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_port_queue_task(ap, ata_pio_task, qc, 0); + + break; + + case ATA_PROT_DMA: + WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING); + + ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ + ap->ops->bmdma_setup(qc); /* set up bmdma */ + ap->ops->bmdma_start(qc); /* initiate bmdma */ + ap->hsm_task_state = HSM_ST_LAST; + break; + + case ATA_PROT_PIO: + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_qc_set_polling(qc); + + ata_tf_to_host(ap, &qc->tf); + + if (qc->tf.flags & ATA_TFLAG_WRITE) { + /* PIO data out protocol */ + ap->hsm_task_state = HSM_ST_FIRST; + ata_port_queue_task(ap, ata_pio_task, qc, 0); + + /* always send first data block using + * the ata_pio_task() codepath. + */ + } else { + /* PIO data in protocol */ + ap->hsm_task_state = HSM_ST; + + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_port_queue_task(ap, ata_pio_task, qc, 0); + + /* if polling, ata_pio_task() handles the rest. + * otherwise, interrupt handler takes over from here. + */ + } + + break; + + case ATA_PROT_ATAPI: + case ATA_PROT_ATAPI_NODATA: + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_qc_set_polling(qc); + + ata_tf_to_host(ap, &qc->tf); + + ap->hsm_task_state = HSM_ST_FIRST; + + /* send cdb by polling if no cdb interrupt */ + if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) || + (qc->tf.flags & ATA_TFLAG_POLLING)) + ata_port_queue_task(ap, ata_pio_task, qc, 0); + break; + + case ATA_PROT_ATAPI_DMA: + WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING); + + ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ + ap->ops->bmdma_setup(qc); /* set up bmdma */ + ap->hsm_task_state = HSM_ST_FIRST; + + /* send cdb by polling if no cdb interrupt */ + if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) + ata_port_queue_task(ap, ata_pio_task, qc, 0); + break; + + default: + WARN_ON(1); + return AC_ERR_SYSTEM; + } + + return 0; +} + +/** + * ata_host_intr - Handle host interrupt for given (port, task) + * @ap: Port on which interrupt arrived (possibly...) + * @qc: Taskfile currently active in engine + * + * Handle host interrupt for given queued command. Currently, + * only DMA interrupts are handled. All other commands are + * handled via polling with interrupts disabled (nIEN bit). + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * One if interrupt was handled, zero if not (shared irq). + */ + +inline unsigned int ata_host_intr (struct ata_port *ap, + struct ata_queued_cmd *qc) +{ + u8 status, host_stat = 0; + + VPRINTK("ata%u: protocol %d task_state %d\n", + ap->id, qc->tf.protocol, ap->hsm_task_state); + + /* Check whether we are expecting interrupt in this state */ + switch (ap->hsm_task_state) { + case HSM_ST_FIRST: + /* Some pre-ATAPI-4 devices assert INTRQ + * at this state when ready to receive CDB. + */ + + /* Check the ATA_DFLAG_CDB_INTR flag is enough here. + * The flag was turned on only for atapi devices. + * No need to check is_atapi_taskfile(&qc->tf) again. + */ + if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) + goto idle_irq; + break; + case HSM_ST_LAST: + if (qc->tf.protocol == ATA_PROT_DMA || + qc->tf.protocol == ATA_PROT_ATAPI_DMA) { + /* check status of DMA engine */ + host_stat = ap->ops->bmdma_status(ap); + VPRINTK("ata%u: host_stat 0x%X\n", ap->id, host_stat); + + /* if it's not our irq... */ + if (!(host_stat & ATA_DMA_INTR)) + goto idle_irq; + + /* before we do anything else, clear DMA-Start bit */ + ap->ops->bmdma_stop(qc); + + if (unlikely(host_stat & ATA_DMA_ERR)) { + /* error when transfering data to/from memory */ + qc->err_mask |= AC_ERR_HOST_BUS; + ap->hsm_task_state = HSM_ST_ERR; + } + } + break; + case HSM_ST: + break; + default: + goto idle_irq; + } + + /* check altstatus */ + status = ata_altstatus(ap); + if (status & ATA_BUSY) + goto idle_irq; + + /* check main status, clearing INTRQ */ + status = ata_chk_status(ap); + if (unlikely(status & ATA_BUSY)) + goto idle_irq; + + /* ack bmdma irq events */ + ap->ops->irq_clear(ap); + + ata_hsm_move(ap, qc, status, 0); + return 1; /* irq handled */ + +idle_irq: + ap->stats.idle_irq++; + +#ifdef ATA_IRQ_TRAP + if ((ap->stats.idle_irq % 1000) == 0) { + ata_irq_ack(ap, 0); /* debug trap */ + ata_port_printk(ap, KERN_WARNING, "irq trap\n"); + return 1; + } +#endif + return 0; /* irq not handled */ +} + +/** + * ata_interrupt - Default ATA host interrupt handler + * @irq: irq line (unused) + * @dev_instance: pointer to our ata_host_set information structure + * @regs: unused + * + * Default interrupt handler for PCI IDE devices. Calls + * ata_host_intr() for each port that is not disabled. + * + * LOCKING: + * Obtains host_set lock during operation. + * + * RETURNS: + * IRQ_NONE or IRQ_HANDLED. + */ + +irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + unsigned int i; + unsigned int handled = 0; + unsigned long flags; + + /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */ + spin_lock_irqsave(&host_set->lock, flags); + + for (i = 0; i < host_set->n_ports; i++) { + struct ata_port *ap; + + ap = host_set->ports[i]; + if (ap && + !(ap->flags & ATA_FLAG_DISABLED)) { + struct ata_queued_cmd *qc; + + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) && + (qc->flags & ATA_QCFLAG_ACTIVE)) + handled |= ata_host_intr(ap, qc); + } + } + + spin_unlock_irqrestore(&host_set->lock, flags); + + return IRQ_RETVAL(handled); +} + +/** + * sata_scr_valid - test whether SCRs are accessible + * @ap: ATA port to test SCR accessibility for + * + * Test whether SCRs are accessible for @ap. + * + * LOCKING: + * None. + * + * RETURNS: + * 1 if SCRs are accessible, 0 otherwise. + */ +int sata_scr_valid(struct ata_port *ap) +{ + return ap->cbl == ATA_CBL_SATA && ap->ops->scr_read; +} + +/** + * sata_scr_read - read SCR register of the specified port + * @ap: ATA port to read SCR for + * @reg: SCR to read + * @val: Place to store read value + * + * Read SCR register @reg of @ap into *@val. This function is + * guaranteed to succeed if the cable type of the port is SATA + * and the port implements ->scr_read. + * + * LOCKING: + * None. + * + * RETURNS: + * 0 on success, negative errno on failure. + */ +int sata_scr_read(struct ata_port *ap, int reg, u32 *val) +{ + if (sata_scr_valid(ap)) { + *val = ap->ops->scr_read(ap, reg); + return 0; + } + return -EOPNOTSUPP; +} + +/** + * sata_scr_write - write SCR register of the specified port + * @ap: ATA port to write SCR for + * @reg: SCR to write + * @val: value to write + * + * Write @val to SCR register @reg of @ap. This function is + * guaranteed to succeed if the cable type of the port is SATA + * and the port implements ->scr_read. + * + * LOCKING: + * None. + * + * RETURNS: + * 0 on success, negative errno on failure. + */ +int sata_scr_write(struct ata_port *ap, int reg, u32 val) +{ + if (sata_scr_valid(ap)) { + ap->ops->scr_write(ap, reg, val); + return 0; + } + return -EOPNOTSUPP; +} + +/** + * sata_scr_write_flush - write SCR register of the specified port and flush + * @ap: ATA port to write SCR for + * @reg: SCR to write + * @val: value to write + * + * This function is identical to sata_scr_write() except that this + * function performs flush after writing to the register. + * + * LOCKING: + * None. + * + * RETURNS: + * 0 on success, negative errno on failure. + */ +int sata_scr_write_flush(struct ata_port *ap, int reg, u32 val) +{ + if (sata_scr_valid(ap)) { + ap->ops->scr_write(ap, reg, val); + ap->ops->scr_read(ap, reg); + return 0; + } + return -EOPNOTSUPP; +} + +/** + * ata_port_online - test whether the given port is online + * @ap: ATA port to test + * + * Test whether @ap is online. Note that this function returns 0 + * if online status of @ap cannot be obtained, so + * ata_port_online(ap) != !ata_port_offline(ap). + * + * LOCKING: + * None. + * + * RETURNS: + * 1 if the port online status is available and online. + */ +int ata_port_online(struct ata_port *ap) +{ + u32 sstatus; + + if (!sata_scr_read(ap, SCR_STATUS, &sstatus) && (sstatus & 0xf) == 0x3) + return 1; + return 0; +} + +/** + * ata_port_offline - test whether the given port is offline + * @ap: ATA port to test + * + * Test whether @ap is offline. Note that this function returns + * 0 if offline status of @ap cannot be obtained, so + * ata_port_online(ap) != !ata_port_offline(ap). + * + * LOCKING: + * None. + * + * RETURNS: + * 1 if the port offline status is available and offline. + */ +int ata_port_offline(struct ata_port *ap) +{ + u32 sstatus; + + if (!sata_scr_read(ap, SCR_STATUS, &sstatus) && (sstatus & 0xf) != 0x3) + return 1; + return 0; +} + +int ata_flush_cache(struct ata_device *dev) +{ + unsigned int err_mask; + u8 cmd; + + if (!ata_try_flush_cache(dev)) + return 0; + + if (ata_id_has_flush_ext(dev->id)) + cmd = ATA_CMD_FLUSH_EXT; + else + cmd = ATA_CMD_FLUSH; + + err_mask = ata_do_simple_cmd(dev, cmd); + if (err_mask) { + ata_dev_printk(dev, KERN_ERR, "failed to flush cache\n"); + return -EIO; + } + + return 0; +} + +static int ata_host_set_request_pm(struct ata_host_set *host_set, + pm_message_t mesg, unsigned int action, + unsigned int ehi_flags, int wait) +{ + unsigned long flags; + int i, rc; + + for (i = 0; i < host_set->n_ports; i++) { + struct ata_port *ap = host_set->ports[i]; + + /* Previous resume operation might still be in + * progress. Wait for PM_PENDING to clear. + */ + if (ap->pflags & ATA_PFLAG_PM_PENDING) { + ata_port_wait_eh(ap); + WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); + } + + /* request PM ops to EH */ + spin_lock_irqsave(ap->lock, flags); + + ap->pm_mesg = mesg; + if (wait) { + rc = 0; + ap->pm_result = &rc; + } + + ap->pflags |= ATA_PFLAG_PM_PENDING; + ap->eh_info.action |= action; + ap->eh_info.flags |= ehi_flags; + + ata_port_schedule_eh(ap); + + spin_unlock_irqrestore(ap->lock, flags); + + /* wait and check result */ + if (wait) { + ata_port_wait_eh(ap); + WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); + if (rc) + return rc; + } + } + + return 0; +} + +/** + * ata_host_set_suspend - suspend host_set + * @host_set: host_set to suspend + * @mesg: PM message + * + * Suspend @host_set. Actual operation is performed by EH. This + * function requests EH to perform PM operations and waits for EH + * to finish. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int ata_host_set_suspend(struct ata_host_set *host_set, pm_message_t mesg) +{ + int i, j, rc; + + rc = ata_host_set_request_pm(host_set, mesg, 0, ATA_EHI_QUIET, 1); + if (rc) + goto fail; + + /* EH is quiescent now. Fail if we have any ready device. + * This happens if hotplug occurs between completion of device + * suspension and here. + */ + for (i = 0; i < host_set->n_ports; i++) { + struct ata_port *ap = host_set->ports[i]; + + for (j = 0; j < ATA_MAX_DEVICES; j++) { + struct ata_device *dev = &ap->device[j]; + + if (ata_dev_ready(dev)) { + ata_port_printk(ap, KERN_WARNING, + "suspend failed, device %d " + "still active\n", dev->devno); + rc = -EBUSY; + goto fail; + } + } + } + + host_set->dev->power.power_state = mesg; + return 0; + + fail: + ata_host_set_resume(host_set); + return rc; +} + +/** + * ata_host_set_resume - resume host_set + * @host_set: host_set to resume + * + * Resume @host_set. Actual operation is performed by EH. This + * function requests EH to perform PM operations and returns. + * Note that all resume operations are performed parallely. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_host_set_resume(struct ata_host_set *host_set) +{ + ata_host_set_request_pm(host_set, PMSG_ON, ATA_EH_SOFTRESET, + ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0); + host_set->dev->power.power_state = PMSG_ON; +} + +/** + * ata_port_start - Set port up for dma. + * @ap: Port to initialize + * + * Called just after data structures for each port are + * initialized. Allocates space for PRD table. + * + * May be used as the port_start() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ + +int ata_port_start (struct ata_port *ap) +{ + struct device *dev = ap->dev; + int rc; + + ap->prd = dma_alloc_coherent(dev, ATA_PRD_TBL_SZ, &ap->prd_dma, GFP_KERNEL); + if (!ap->prd) + return -ENOMEM; + + rc = ata_pad_alloc(ap, dev); + if (rc) { + dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma); + return rc; + } + + DPRINTK("prd alloc, virt %p, dma %llx\n", ap->prd, (unsigned long long) ap->prd_dma); + + return 0; +} + + +/** + * ata_port_stop - Undo ata_port_start() + * @ap: Port to shut down + * + * Frees the PRD table. + * + * May be used as the port_stop() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ + +void ata_port_stop (struct ata_port *ap) +{ + struct device *dev = ap->dev; + + dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma); + ata_pad_free(ap, dev); +} + +void ata_host_stop (struct ata_host_set *host_set) +{ + if (host_set->mmio_base) + iounmap(host_set->mmio_base); +} + +/** + * ata_dev_init - Initialize an ata_device structure + * @dev: Device structure to initialize + * + * Initialize @dev in preparation for probing. + * + * LOCKING: + * Inherited from caller. + */ +void ata_dev_init(struct ata_device *dev) +{ + struct ata_port *ap = dev->ap; + unsigned long flags; + + /* SATA spd limit is bound to the first device */ + ap->sata_spd_limit = ap->hw_sata_spd_limit; + + /* High bits of dev->flags are used to record warm plug + * requests which occur asynchronously. Synchronize using + * host_set lock. + */ + spin_lock_irqsave(ap->lock, flags); + dev->flags &= ~ATA_DFLAG_INIT_MASK; + spin_unlock_irqrestore(ap->lock, flags); + + memset((void *)dev + ATA_DEVICE_CLEAR_OFFSET, 0, + sizeof(*dev) - ATA_DEVICE_CLEAR_OFFSET); + dev->pio_mask = UINT_MAX; + dev->mwdma_mask = UINT_MAX; + dev->udma_mask = UINT_MAX; +} + +/** + * ata_port_init - Initialize an ata_port structure + * @ap: Structure to initialize + * @host_set: Collection of hosts to which @ap belongs + * @ent: Probe information provided by low-level driver + * @port_no: Port number associated with this ata_port + * + * Initialize a new ata_port structure. + * + * LOCKING: + * Inherited from caller. + */ +void ata_port_init(struct ata_port *ap, struct ata_host_set *host_set, + const struct ata_probe_ent *ent, unsigned int port_no) +{ + unsigned int i; + + ap->lock = &host_set->lock; + ap->flags = ATA_FLAG_DISABLED; + ap->id = ata_unique_id++; + ap->ctl = ATA_DEVCTL_OBS; + ap->host_set = host_set; + ap->dev = ent->dev; + ap->port_no = port_no; + ap->pio_mask = ent->pio_mask; + ap->mwdma_mask = ent->mwdma_mask; + ap->udma_mask = ent->udma_mask; + ap->flags |= ent->host_flags; + ap->ops = ent->port_ops; + ap->hw_sata_spd_limit = UINT_MAX; + ap->active_tag = ATA_TAG_POISON; + ap->last_ctl = 0xFF; + +#if defined(ATA_VERBOSE_DEBUG) + /* turn on all debugging levels */ + ap->msg_enable = 0x00FF; +#elif defined(ATA_DEBUG) + ap->msg_enable = ATA_MSG_DRV | ATA_MSG_INFO | ATA_MSG_CTL | ATA_MSG_WARN | ATA_MSG_ERR; +#else + ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN; +#endif + + INIT_WORK(&ap->port_task, NULL, NULL); + INIT_WORK(&ap->hotplug_task, ata_scsi_hotplug, ap); + INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan, ap); + INIT_LIST_HEAD(&ap->eh_done_q); + init_waitqueue_head(&ap->eh_wait_q); + + /* set cable type */ + ap->cbl = ATA_CBL_NONE; + if (ap->flags & ATA_FLAG_SATA) + ap->cbl = ATA_CBL_SATA; + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + dev->ap = ap; + dev->devno = i; + ata_dev_init(dev); + } + +#ifdef ATA_IRQ_TRAP + ap->stats.unhandled_irq = 1; + ap->stats.idle_irq = 1; +#endif + + memcpy(&ap->ioaddr, &ent->port[port_no], sizeof(struct ata_ioports)); +} + +/** + * ata_port_init_shost - Initialize SCSI host associated with ATA port + * @ap: ATA port to initialize SCSI host for + * @shost: SCSI host associated with @ap + * + * Initialize SCSI host @shost associated with ATA port @ap. + * + * LOCKING: + * Inherited from caller. + */ +static void ata_port_init_shost(struct ata_port *ap, struct Scsi_Host *shost) +{ + ap->host = shost; + + shost->unique_id = ap->id; + shost->max_id = 16; + shost->max_lun = 1; + shost->max_channel = 1; + shost->max_cmd_len = 12; +} + +/** + * ata_port_add - Attach low-level ATA driver to system + * @ent: Information provided by low-level driver + * @host_set: Collections of ports to which we add + * @port_no: Port number associated with this host + * + * Attach low-level ATA driver to system. + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * New ata_port on success, for NULL on error. + */ +static struct ata_port * ata_port_add(const struct ata_probe_ent *ent, + struct ata_host_set *host_set, + unsigned int port_no) +{ + struct Scsi_Host *shost; + struct ata_port *ap; + + DPRINTK("ENTER\n"); + + if (!ent->port_ops->error_handler && + !(ent->host_flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST))) { + printk(KERN_ERR "ata%u: no reset mechanism available\n", + port_no); + return NULL; + } + + shost = scsi_host_alloc(ent->sht, sizeof(struct ata_port)); + if (!shost) + return NULL; + + shost->transportt = &ata_scsi_transport_template; + + ap = ata_shost_to_port(shost); + + ata_port_init(ap, host_set, ent, port_no); + ata_port_init_shost(ap, shost); + + return ap; +} + +/** + * ata_sas_host_init - Initialize a host_set struct + * @host_set: host_set to initialize + * @dev: device host_set is attached to + * @flags: host_set flags + * @ops: port_ops + * + * LOCKING: + * PCI/etc. bus probe sem. + * + */ + +void ata_host_set_init(struct ata_host_set *host_set, + struct device *dev, unsigned long flags, + const struct ata_port_operations *ops) +{ + spin_lock_init(&host_set->lock); + host_set->dev = dev; + host_set->flags = flags; + host_set->ops = ops; +} + +/** + * ata_device_add - Register hardware device with ATA and SCSI layers + * @ent: Probe information describing hardware device to be registered + * + * This function processes the information provided in the probe + * information struct @ent, allocates the necessary ATA and SCSI + * host information structures, initializes them, and registers + * everything with requisite kernel subsystems. + * + * This function requests irqs, probes the ATA bus, and probes + * the SCSI bus. + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * Number of ports registered. Zero on error (no ports registered). + */ +int ata_device_add(const struct ata_probe_ent *ent) +{ + unsigned int i; + struct device *dev = ent->dev; + struct ata_host_set *host_set; + int rc; + + DPRINTK("ENTER\n"); + /* alloc a container for our list of ATA ports (buses) */ + host_set = kzalloc(sizeof(struct ata_host_set) + + (ent->n_ports * sizeof(void *)), GFP_KERNEL); + if (!host_set) + return 0; + + ata_host_set_init(host_set, dev, ent->host_set_flags, ent->port_ops); + host_set->n_ports = ent->n_ports; + host_set->irq = ent->irq; + host_set->irq2 = ent->irq2; + host_set->mmio_base = ent->mmio_base; + host_set->private_data = ent->private_data; + + /* register each port bound to this device */ + for (i = 0; i < host_set->n_ports; i++) { + struct ata_port *ap; + unsigned long xfer_mode_mask; + int irq_line = ent->irq; + + ap = ata_port_add(ent, host_set, i); + if (!ap) + goto err_out; + + host_set->ports[i] = ap; + + /* dummy? */ + if (ent->dummy_port_mask & (1 << i)) { + ata_port_printk(ap, KERN_INFO, "DUMMY\n"); + ap->ops = &ata_dummy_port_ops; + continue; + } + + /* start port */ + rc = ap->ops->port_start(ap); + if (rc) { + host_set->ports[i] = NULL; + scsi_host_put(ap->host); + goto err_out; + } + + /* Report the secondary IRQ for second channel legacy */ + if (i == 1 && ent->irq2) + irq_line = ent->irq2; + + xfer_mode_mask =(ap->udma_mask << ATA_SHIFT_UDMA) | + (ap->mwdma_mask << ATA_SHIFT_MWDMA) | + (ap->pio_mask << ATA_SHIFT_PIO); + + /* print per-port info to dmesg */ + ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%lX " + "ctl 0x%lX bmdma 0x%lX irq %d\n", + ap->flags & ATA_FLAG_SATA ? 'S' : 'P', + ata_mode_string(xfer_mode_mask), + ap->ioaddr.cmd_addr, + ap->ioaddr.ctl_addr, + ap->ioaddr.bmdma_addr, + irq_line); + + ata_chk_status(ap); + host_set->ops->irq_clear(ap); + ata_eh_freeze_port(ap); /* freeze port before requesting IRQ */ + } + + /* obtain irq, that may be shared between channels */ + rc = request_irq(ent->irq, ent->port_ops->irq_handler, ent->irq_flags, + DRV_NAME, host_set); + if (rc) { + dev_printk(KERN_ERR, dev, "irq %lu request failed: %d\n", + ent->irq, rc); + goto err_out; + } + + /* do we have a second IRQ for the other channel, eg legacy mode */ + if (ent->irq2) { + /* We will get weird core code crashes later if this is true + so trap it now */ + BUG_ON(ent->irq == ent->irq2); + + rc = request_irq(ent->irq2, ent->port_ops->irq_handler, ent->irq_flags, + DRV_NAME, host_set); + if (rc) { + dev_printk(KERN_ERR, dev, "irq %lu request failed: %d\n", + ent->irq2, rc); + goto err_out_free_irq; + } + } + + /* perform each probe synchronously */ + DPRINTK("probe begin\n"); + for (i = 0; i < host_set->n_ports; i++) { + struct ata_port *ap = host_set->ports[i]; + u32 scontrol; + int rc; + + /* init sata_spd_limit to the current value */ + if (sata_scr_read(ap, SCR_CONTROL, &scontrol) == 0) { + int spd = (scontrol >> 4) & 0xf; + ap->hw_sata_spd_limit &= (1 << spd) - 1; + } + ap->sata_spd_limit = ap->hw_sata_spd_limit; + + rc = scsi_add_host(ap->host, dev); + if (rc) { + ata_port_printk(ap, KERN_ERR, "scsi_add_host failed\n"); + /* FIXME: do something useful here */ + /* FIXME: handle unconditional calls to + * scsi_scan_host and ata_host_remove, below, + * at the very least + */ + } + + if (ap->ops->error_handler) { + struct ata_eh_info *ehi = &ap->eh_info; + unsigned long flags; + + ata_port_probe(ap); + + /* kick EH for boot probing */ + spin_lock_irqsave(ap->lock, flags); + + ehi->probe_mask = (1 << ATA_MAX_DEVICES) - 1; + ehi->action |= ATA_EH_SOFTRESET; + ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET; + + ap->pflags |= ATA_PFLAG_LOADING; + ata_port_schedule_eh(ap); + + spin_unlock_irqrestore(ap->lock, flags); + + /* wait for EH to finish */ + ata_port_wait_eh(ap); + } else { + DPRINTK("ata%u: bus probe begin\n", ap->id); + rc = ata_bus_probe(ap); + DPRINTK("ata%u: bus probe end\n", ap->id); + + if (rc) { + /* FIXME: do something useful here? + * Current libata behavior will + * tear down everything when + * the module is removed + * or the h/w is unplugged. + */ + } + } + } + + /* probes are done, now scan each port's disk(s) */ + DPRINTK("host probe begin\n"); + for (i = 0; i < host_set->n_ports; i++) { + struct ata_port *ap = host_set->ports[i]; + + ata_scsi_scan_host(ap); + } + + dev_set_drvdata(dev, host_set); + + VPRINTK("EXIT, returning %u\n", ent->n_ports); + return ent->n_ports; /* success */ + +err_out_free_irq: + free_irq(ent->irq, host_set); +err_out: + for (i = 0; i < host_set->n_ports; i++) { + struct ata_port *ap = host_set->ports[i]; + if (ap) { + ap->ops->port_stop(ap); + scsi_host_put(ap->host); + } + } + + kfree(host_set); + VPRINTK("EXIT, returning 0\n"); + return 0; +} + +/** + * ata_port_detach - Detach ATA port in prepration of device removal + * @ap: ATA port to be detached + * + * Detach all ATA devices and the associated SCSI devices of @ap; + * then, remove the associated SCSI host. @ap is guaranteed to + * be quiescent on return from this function. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_port_detach(struct ata_port *ap) +{ + unsigned long flags; + int i; + + if (!ap->ops->error_handler) + goto skip_eh; + + /* tell EH we're leaving & flush EH */ + spin_lock_irqsave(ap->lock, flags); + ap->pflags |= ATA_PFLAG_UNLOADING; + spin_unlock_irqrestore(ap->lock, flags); + + ata_port_wait_eh(ap); + + /* EH is now guaranteed to see UNLOADING, so no new device + * will be attached. Disable all existing devices. + */ + spin_lock_irqsave(ap->lock, flags); + + for (i = 0; i < ATA_MAX_DEVICES; i++) + ata_dev_disable(&ap->device[i]); + + spin_unlock_irqrestore(ap->lock, flags); + + /* Final freeze & EH. All in-flight commands are aborted. EH + * will be skipped and retrials will be terminated with bad + * target. + */ + spin_lock_irqsave(ap->lock, flags); + ata_port_freeze(ap); /* won't be thawed */ + spin_unlock_irqrestore(ap->lock, flags); + + ata_port_wait_eh(ap); + + /* Flush hotplug task. The sequence is similar to + * ata_port_flush_task(). + */ + flush_workqueue(ata_aux_wq); + cancel_delayed_work(&ap->hotplug_task); + flush_workqueue(ata_aux_wq); + + skip_eh: + /* remove the associated SCSI host */ + scsi_remove_host(ap->host); +} + +/** + * ata_host_set_remove - PCI layer callback for device removal + * @host_set: ATA host set that was removed + * + * Unregister all objects associated with this host set. Free those + * objects. + * + * LOCKING: + * Inherited from calling layer (may sleep). + */ + +void ata_host_set_remove(struct ata_host_set *host_set) +{ + unsigned int i; + + for (i = 0; i < host_set->n_ports; i++) + ata_port_detach(host_set->ports[i]); + + free_irq(host_set->irq, host_set); + if (host_set->irq2) + free_irq(host_set->irq2, host_set); + + for (i = 0; i < host_set->n_ports; i++) { + struct ata_port *ap = host_set->ports[i]; + + ata_scsi_release(ap->host); + + if ((ap->flags & ATA_FLAG_NO_LEGACY) == 0) { + struct ata_ioports *ioaddr = &ap->ioaddr; + + /* FIXME: Add -ac IDE pci mods to remove these special cases */ + if (ioaddr->cmd_addr == ATA_PRIMARY_CMD) + release_region(ATA_PRIMARY_CMD, 8); + else if (ioaddr->cmd_addr == ATA_SECONDARY_CMD) + release_region(ATA_SECONDARY_CMD, 8); + } + + scsi_host_put(ap->host); + } + + if (host_set->ops->host_stop) + host_set->ops->host_stop(host_set); + + kfree(host_set); +} + +/** + * ata_scsi_release - SCSI layer callback hook for host unload + * @host: libata host to be unloaded + * + * Performs all duties necessary to shut down a libata port... + * Kill port kthread, disable port, and release resources. + * + * LOCKING: + * Inherited from SCSI layer. + * + * RETURNS: + * One. + */ + +int ata_scsi_release(struct Scsi_Host *host) +{ + struct ata_port *ap = ata_shost_to_port(host); + + DPRINTK("ENTER\n"); + + ap->ops->port_disable(ap); + ap->ops->port_stop(ap); + + DPRINTK("EXIT\n"); + return 1; +} + +struct ata_probe_ent * +ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port) +{ + struct ata_probe_ent *probe_ent; + + probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); + if (!probe_ent) { + printk(KERN_ERR DRV_NAME "(%s): out of memory\n", + kobject_name(&(dev->kobj))); + return NULL; + } + + INIT_LIST_HEAD(&probe_ent->node); + probe_ent->dev = dev; + + probe_ent->sht = port->sht; + probe_ent->host_flags = port->host_flags; + probe_ent->pio_mask = port->pio_mask; + probe_ent->mwdma_mask = port->mwdma_mask; + probe_ent->udma_mask = port->udma_mask; + probe_ent->port_ops = port->port_ops; + + return probe_ent; +} + +/** + * ata_std_ports - initialize ioaddr with standard port offsets. + * @ioaddr: IO address structure to be initialized + * + * Utility function which initializes data_addr, error_addr, + * feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr, + * device_addr, status_addr, and command_addr to standard offsets + * relative to cmd_addr. + * + * Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr. + */ + +void ata_std_ports(struct ata_ioports *ioaddr) +{ + ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA; + ioaddr->error_addr = ioaddr->cmd_addr + ATA_REG_ERR; + ioaddr->feature_addr = ioaddr->cmd_addr + ATA_REG_FEATURE; + ioaddr->nsect_addr = ioaddr->cmd_addr + ATA_REG_NSECT; + ioaddr->lbal_addr = ioaddr->cmd_addr + ATA_REG_LBAL; + ioaddr->lbam_addr = ioaddr->cmd_addr + ATA_REG_LBAM; + ioaddr->lbah_addr = ioaddr->cmd_addr + ATA_REG_LBAH; + ioaddr->device_addr = ioaddr->cmd_addr + ATA_REG_DEVICE; + ioaddr->status_addr = ioaddr->cmd_addr + ATA_REG_STATUS; + ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD; +} + + +#ifdef CONFIG_PCI + +void ata_pci_host_stop (struct ata_host_set *host_set) +{ + struct pci_dev *pdev = to_pci_dev(host_set->dev); + + pci_iounmap(pdev, host_set->mmio_base); +} + +/** + * ata_pci_remove_one - PCI layer callback for device removal + * @pdev: PCI device that was removed + * + * PCI layer indicates to libata via this hook that + * hot-unplug or module unload event has occurred. + * Handle this by unregistering all objects associated + * with this PCI device. Free those objects. Then finally + * release PCI resources and disable device. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + */ + +void ata_pci_remove_one (struct pci_dev *pdev) +{ + struct device *dev = pci_dev_to_dev(pdev); + struct ata_host_set *host_set = dev_get_drvdata(dev); + + ata_host_set_remove(host_set); + + pci_release_regions(pdev); + pci_disable_device(pdev); + dev_set_drvdata(dev, NULL); +} + +/* move to PCI subsystem */ +int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits) +{ + unsigned long tmp = 0; + + switch (bits->width) { + case 1: { + u8 tmp8 = 0; + pci_read_config_byte(pdev, bits->reg, &tmp8); + tmp = tmp8; + break; + } + case 2: { + u16 tmp16 = 0; + pci_read_config_word(pdev, bits->reg, &tmp16); + tmp = tmp16; + break; + } + case 4: { + u32 tmp32 = 0; + pci_read_config_dword(pdev, bits->reg, &tmp32); + tmp = tmp32; + break; + } + + default: + return -EINVAL; + } + + tmp &= bits->mask; + + return (tmp == bits->val) ? 1 : 0; +} + +void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg) +{ + pci_save_state(pdev); + + if (mesg.event == PM_EVENT_SUSPEND) { + pci_disable_device(pdev); + pci_set_power_state(pdev, PCI_D3hot); + } +} + +void ata_pci_device_do_resume(struct pci_dev *pdev) +{ + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + pci_enable_device(pdev); + pci_set_master(pdev); +} + +int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) +{ + struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); + int rc = 0; + + rc = ata_host_set_suspend(host_set, mesg); + if (rc) + return rc; + + ata_pci_device_do_suspend(pdev, mesg); + + return 0; +} + +int ata_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); + + ata_pci_device_do_resume(pdev); + ata_host_set_resume(host_set); + return 0; +} +#endif /* CONFIG_PCI */ + + +static int __init ata_init(void) +{ + ata_probe_timeout *= HZ; + ata_wq = create_workqueue("ata"); + if (!ata_wq) + return -ENOMEM; + + ata_aux_wq = create_singlethread_workqueue("ata_aux"); + if (!ata_aux_wq) { + destroy_workqueue(ata_wq); + return -ENOMEM; + } + + printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n"); + return 0; +} + +static void __exit ata_exit(void) +{ + destroy_workqueue(ata_wq); + destroy_workqueue(ata_aux_wq); +} + +module_init(ata_init); +module_exit(ata_exit); + +static unsigned long ratelimit_time; +static DEFINE_SPINLOCK(ata_ratelimit_lock); + +int ata_ratelimit(void) +{ + int rc; + unsigned long flags; + + spin_lock_irqsave(&ata_ratelimit_lock, flags); + + if (time_after(jiffies, ratelimit_time)) { + rc = 1; + ratelimit_time = jiffies + (HZ/5); + } else + rc = 0; + + spin_unlock_irqrestore(&ata_ratelimit_lock, flags); + + return rc; +} + +/** + * ata_wait_register - wait until register value changes + * @reg: IO-mapped register + * @mask: Mask to apply to read register value + * @val: Wait condition + * @interval_msec: polling interval in milliseconds + * @timeout_msec: timeout in milliseconds + * + * Waiting for some bits of register to change is a common + * operation for ATA controllers. This function reads 32bit LE + * IO-mapped register @reg and tests for the following condition. + * + * (*@reg & mask) != val + * + * If the condition is met, it returns; otherwise, the process is + * repeated after @interval_msec until timeout. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * The final register value. + */ +u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, + unsigned long interval_msec, + unsigned long timeout_msec) +{ + unsigned long timeout; + u32 tmp; + + tmp = ioread32(reg); + + /* Calculate timeout _after_ the first read to make sure + * preceding writes reach the controller before starting to + * eat away the timeout. + */ + timeout = jiffies + (timeout_msec * HZ) / 1000; + + while ((tmp & mask) == val && time_before(jiffies, timeout)) { + msleep(interval_msec); + tmp = ioread32(reg); + } + + return tmp; +} + +/* + * Dummy port_ops + */ +static void ata_dummy_noret(struct ata_port *ap) { } +static int ata_dummy_ret0(struct ata_port *ap) { return 0; } +static void ata_dummy_qc_noret(struct ata_queued_cmd *qc) { } + +static u8 ata_dummy_check_status(struct ata_port *ap) +{ + return ATA_DRDY; +} + +static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc) +{ + return AC_ERR_SYSTEM; +} + +const struct ata_port_operations ata_dummy_port_ops = { + .port_disable = ata_port_disable, + .check_status = ata_dummy_check_status, + .check_altstatus = ata_dummy_check_status, + .dev_select = ata_noop_dev_select, + .qc_prep = ata_noop_qc_prep, + .qc_issue = ata_dummy_qc_issue, + .freeze = ata_dummy_noret, + .thaw = ata_dummy_noret, + .error_handler = ata_dummy_noret, + .post_internal_cmd = ata_dummy_qc_noret, + .irq_clear = ata_dummy_noret, + .port_start = ata_dummy_ret0, + .port_stop = ata_dummy_noret, +}; + +/* + * libata is essentially a library of internal helper functions for + * low-level ATA host controller drivers. As such, the API/ABI is + * likely to change as new drivers are added and updated. + * Do not depend on ABI/API stability. + */ + +EXPORT_SYMBOL_GPL(sata_deb_timing_normal); +EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug); +EXPORT_SYMBOL_GPL(sata_deb_timing_long); +EXPORT_SYMBOL_GPL(ata_dummy_port_ops); +EXPORT_SYMBOL_GPL(ata_std_bios_param); +EXPORT_SYMBOL_GPL(ata_std_ports); +EXPORT_SYMBOL_GPL(ata_host_set_init); +EXPORT_SYMBOL_GPL(ata_device_add); +EXPORT_SYMBOL_GPL(ata_port_detach); +EXPORT_SYMBOL_GPL(ata_host_set_remove); +EXPORT_SYMBOL_GPL(ata_sg_init); +EXPORT_SYMBOL_GPL(ata_sg_init_one); +EXPORT_SYMBOL_GPL(ata_hsm_move); +EXPORT_SYMBOL_GPL(ata_qc_complete); +EXPORT_SYMBOL_GPL(ata_qc_complete_multiple); +EXPORT_SYMBOL_GPL(ata_qc_issue_prot); +EXPORT_SYMBOL_GPL(ata_tf_load); +EXPORT_SYMBOL_GPL(ata_tf_read); +EXPORT_SYMBOL_GPL(ata_noop_dev_select); +EXPORT_SYMBOL_GPL(ata_std_dev_select); +EXPORT_SYMBOL_GPL(ata_tf_to_fis); +EXPORT_SYMBOL_GPL(ata_tf_from_fis); +EXPORT_SYMBOL_GPL(ata_check_status); +EXPORT_SYMBOL_GPL(ata_altstatus); +EXPORT_SYMBOL_GPL(ata_exec_command); +EXPORT_SYMBOL_GPL(ata_port_start); +EXPORT_SYMBOL_GPL(ata_port_stop); +EXPORT_SYMBOL_GPL(ata_host_stop); +EXPORT_SYMBOL_GPL(ata_interrupt); +EXPORT_SYMBOL_GPL(ata_mmio_data_xfer); +EXPORT_SYMBOL_GPL(ata_pio_data_xfer); +EXPORT_SYMBOL_GPL(ata_pio_data_xfer_noirq); +EXPORT_SYMBOL_GPL(ata_qc_prep); +EXPORT_SYMBOL_GPL(ata_noop_qc_prep); +EXPORT_SYMBOL_GPL(ata_bmdma_setup); +EXPORT_SYMBOL_GPL(ata_bmdma_start); +EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear); +EXPORT_SYMBOL_GPL(ata_bmdma_status); +EXPORT_SYMBOL_GPL(ata_bmdma_stop); +EXPORT_SYMBOL_GPL(ata_bmdma_freeze); +EXPORT_SYMBOL_GPL(ata_bmdma_thaw); +EXPORT_SYMBOL_GPL(ata_bmdma_drive_eh); +EXPORT_SYMBOL_GPL(ata_bmdma_error_handler); +EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd); +EXPORT_SYMBOL_GPL(ata_port_probe); +EXPORT_SYMBOL_GPL(sata_set_spd); +EXPORT_SYMBOL_GPL(sata_phy_debounce); +EXPORT_SYMBOL_GPL(sata_phy_resume); +EXPORT_SYMBOL_GPL(sata_phy_reset); +EXPORT_SYMBOL_GPL(__sata_phy_reset); +EXPORT_SYMBOL_GPL(ata_bus_reset); +EXPORT_SYMBOL_GPL(ata_std_prereset); +EXPORT_SYMBOL_GPL(ata_std_softreset); +EXPORT_SYMBOL_GPL(sata_std_hardreset); +EXPORT_SYMBOL_GPL(ata_std_postreset); +EXPORT_SYMBOL_GPL(ata_dev_revalidate); +EXPORT_SYMBOL_GPL(ata_dev_classify); +EXPORT_SYMBOL_GPL(ata_dev_pair); +EXPORT_SYMBOL_GPL(ata_port_disable); +EXPORT_SYMBOL_GPL(ata_ratelimit); +EXPORT_SYMBOL_GPL(ata_wait_register); +EXPORT_SYMBOL_GPL(ata_busy_sleep); +EXPORT_SYMBOL_GPL(ata_port_queue_task); +EXPORT_SYMBOL_GPL(ata_scsi_ioctl); +EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); +EXPORT_SYMBOL_GPL(ata_scsi_slave_config); +EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy); +EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth); +EXPORT_SYMBOL_GPL(ata_scsi_release); +EXPORT_SYMBOL_GPL(ata_host_intr); +EXPORT_SYMBOL_GPL(sata_scr_valid); +EXPORT_SYMBOL_GPL(sata_scr_read); +EXPORT_SYMBOL_GPL(sata_scr_write); +EXPORT_SYMBOL_GPL(sata_scr_write_flush); +EXPORT_SYMBOL_GPL(ata_port_online); +EXPORT_SYMBOL_GPL(ata_port_offline); +EXPORT_SYMBOL_GPL(ata_host_set_suspend); +EXPORT_SYMBOL_GPL(ata_host_set_resume); +EXPORT_SYMBOL_GPL(ata_id_string); +EXPORT_SYMBOL_GPL(ata_id_c_string); +EXPORT_SYMBOL_GPL(ata_scsi_simulate); + +EXPORT_SYMBOL_GPL(ata_pio_need_iordy); +EXPORT_SYMBOL_GPL(ata_timing_compute); +EXPORT_SYMBOL_GPL(ata_timing_merge); + +#ifdef CONFIG_PCI +EXPORT_SYMBOL_GPL(pci_test_config_bits); +EXPORT_SYMBOL_GPL(ata_pci_host_stop); +EXPORT_SYMBOL_GPL(ata_pci_init_native_mode); +EXPORT_SYMBOL_GPL(ata_pci_init_one); +EXPORT_SYMBOL_GPL(ata_pci_remove_one); +EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend); +EXPORT_SYMBOL_GPL(ata_pci_device_do_resume); +EXPORT_SYMBOL_GPL(ata_pci_device_suspend); +EXPORT_SYMBOL_GPL(ata_pci_device_resume); +EXPORT_SYMBOL_GPL(ata_pci_default_filter); +EXPORT_SYMBOL_GPL(ata_pci_clear_simplex); +#endif /* CONFIG_PCI */ + +EXPORT_SYMBOL_GPL(ata_scsi_device_suspend); +EXPORT_SYMBOL_GPL(ata_scsi_device_resume); + +EXPORT_SYMBOL_GPL(ata_eng_timeout); +EXPORT_SYMBOL_GPL(ata_port_schedule_eh); +EXPORT_SYMBOL_GPL(ata_port_abort); +EXPORT_SYMBOL_GPL(ata_port_freeze); +EXPORT_SYMBOL_GPL(ata_eh_freeze_port); +EXPORT_SYMBOL_GPL(ata_eh_thaw_port); +EXPORT_SYMBOL_GPL(ata_eh_qc_complete); +EXPORT_SYMBOL_GPL(ata_eh_qc_retry); +EXPORT_SYMBOL_GPL(ata_do_eh); diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c new file mode 100644 index 00000000000..2c476eee463 --- /dev/null +++ b/drivers/ata/libata-eh.c @@ -0,0 +1,2246 @@ +/* + * libata-eh.c - libata error handling + * + * Maintained by: Jeff Garzik + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2006 Tejun Heo + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, + * USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available from http://www.t13.org/ and + * http://www.sata-io.org/ + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include "../scsi/scsi_transport_api.h" + +#include + +#include "libata.h" + +static void __ata_port_freeze(struct ata_port *ap); +static void ata_eh_finish(struct ata_port *ap); +static void ata_eh_handle_port_suspend(struct ata_port *ap); +static void ata_eh_handle_port_resume(struct ata_port *ap); + +static void ata_ering_record(struct ata_ering *ering, int is_io, + unsigned int err_mask) +{ + struct ata_ering_entry *ent; + + WARN_ON(!err_mask); + + ering->cursor++; + ering->cursor %= ATA_ERING_SIZE; + + ent = &ering->ring[ering->cursor]; + ent->is_io = is_io; + ent->err_mask = err_mask; + ent->timestamp = get_jiffies_64(); +} + +static struct ata_ering_entry * ata_ering_top(struct ata_ering *ering) +{ + struct ata_ering_entry *ent = &ering->ring[ering->cursor]; + if (!ent->err_mask) + return NULL; + return ent; +} + +static int ata_ering_map(struct ata_ering *ering, + int (*map_fn)(struct ata_ering_entry *, void *), + void *arg) +{ + int idx, rc = 0; + struct ata_ering_entry *ent; + + idx = ering->cursor; + do { + ent = &ering->ring[idx]; + if (!ent->err_mask) + break; + rc = map_fn(ent, arg); + if (rc) + break; + idx = (idx - 1 + ATA_ERING_SIZE) % ATA_ERING_SIZE; + } while (idx != ering->cursor); + + return rc; +} + +static unsigned int ata_eh_dev_action(struct ata_device *dev) +{ + struct ata_eh_context *ehc = &dev->ap->eh_context; + + return ehc->i.action | ehc->i.dev_action[dev->devno]; +} + +static void ata_eh_clear_action(struct ata_device *dev, + struct ata_eh_info *ehi, unsigned int action) +{ + int i; + + if (!dev) { + ehi->action &= ~action; + for (i = 0; i < ATA_MAX_DEVICES; i++) + ehi->dev_action[i] &= ~action; + } else { + /* doesn't make sense for port-wide EH actions */ + WARN_ON(!(action & ATA_EH_PERDEV_MASK)); + + /* break ehi->action into ehi->dev_action */ + if (ehi->action & action) { + for (i = 0; i < ATA_MAX_DEVICES; i++) + ehi->dev_action[i] |= ehi->action & action; + ehi->action &= ~action; + } + + /* turn off the specified per-dev action */ + ehi->dev_action[dev->devno] &= ~action; + } +} + +/** + * ata_scsi_timed_out - SCSI layer time out callback + * @cmd: timed out SCSI command + * + * Handles SCSI layer timeout. We race with normal completion of + * the qc for @cmd. If the qc is already gone, we lose and let + * the scsi command finish (EH_HANDLED). Otherwise, the qc has + * timed out and EH should be invoked. Prevent ata_qc_complete() + * from finishing it by setting EH_SCHEDULED and return + * EH_NOT_HANDLED. + * + * TODO: kill this function once old EH is gone. + * + * LOCKING: + * Called from timer context + * + * RETURNS: + * EH_HANDLED or EH_NOT_HANDLED + */ +enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) +{ + struct Scsi_Host *host = cmd->device->host; + struct ata_port *ap = ata_shost_to_port(host); + unsigned long flags; + struct ata_queued_cmd *qc; + enum scsi_eh_timer_return ret; + + DPRINTK("ENTER\n"); + + if (ap->ops->error_handler) { + ret = EH_NOT_HANDLED; + goto out; + } + + ret = EH_HANDLED; + spin_lock_irqsave(ap->lock, flags); + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc) { + WARN_ON(qc->scsicmd != cmd); + qc->flags |= ATA_QCFLAG_EH_SCHEDULED; + qc->err_mask |= AC_ERR_TIMEOUT; + ret = EH_NOT_HANDLED; + } + spin_unlock_irqrestore(ap->lock, flags); + + out: + DPRINTK("EXIT, ret=%d\n", ret); + return ret; +} + +/** + * ata_scsi_error - SCSI layer error handler callback + * @host: SCSI host on which error occurred + * + * Handles SCSI-layer-thrown error events. + * + * LOCKING: + * Inherited from SCSI layer (none, can sleep) + * + * RETURNS: + * Zero. + */ +void ata_scsi_error(struct Scsi_Host *host) +{ + struct ata_port *ap = ata_shost_to_port(host); + int i, repeat_cnt = ATA_EH_MAX_REPEAT; + unsigned long flags; + + DPRINTK("ENTER\n"); + + /* synchronize with port task */ + ata_port_flush_task(ap); + + /* synchronize with host_set lock and sort out timeouts */ + + /* For new EH, all qcs are finished in one of three ways - + * normal completion, error completion, and SCSI timeout. + * Both cmpletions can race against SCSI timeout. When normal + * completion wins, the qc never reaches EH. When error + * completion wins, the qc has ATA_QCFLAG_FAILED set. + * + * When SCSI timeout wins, things are a bit more complex. + * Normal or error completion can occur after the timeout but + * before this point. In such cases, both types of + * completions are honored. A scmd is determined to have + * timed out iff its associated qc is active and not failed. + */ + if (ap->ops->error_handler) { + struct scsi_cmnd *scmd, *tmp; + int nr_timedout = 0; + + spin_lock_irqsave(ap->lock, flags); + + list_for_each_entry_safe(scmd, tmp, &host->eh_cmd_q, eh_entry) { + struct ata_queued_cmd *qc; + + for (i = 0; i < ATA_MAX_QUEUE; i++) { + qc = __ata_qc_from_tag(ap, i); + if (qc->flags & ATA_QCFLAG_ACTIVE && + qc->scsicmd == scmd) + break; + } + + if (i < ATA_MAX_QUEUE) { + /* the scmd has an associated qc */ + if (!(qc->flags & ATA_QCFLAG_FAILED)) { + /* which hasn't failed yet, timeout */ + qc->err_mask |= AC_ERR_TIMEOUT; + qc->flags |= ATA_QCFLAG_FAILED; + nr_timedout++; + } + } else { + /* Normal completion occurred after + * SCSI timeout but before this point. + * Successfully complete it. + */ + scmd->retries = scmd->allowed; + scsi_eh_finish_cmd(scmd, &ap->eh_done_q); + } + } + + /* If we have timed out qcs. They belong to EH from + * this point but the state of the controller is + * unknown. Freeze the port to make sure the IRQ + * handler doesn't diddle with those qcs. This must + * be done atomically w.r.t. setting QCFLAG_FAILED. + */ + if (nr_timedout) + __ata_port_freeze(ap); + + spin_unlock_irqrestore(ap->lock, flags); + } else + spin_unlock_wait(ap->lock); + + repeat: + /* invoke error handler */ + if (ap->ops->error_handler) { + /* process port resume request */ + ata_eh_handle_port_resume(ap); + + /* fetch & clear EH info */ + spin_lock_irqsave(ap->lock, flags); + + memset(&ap->eh_context, 0, sizeof(ap->eh_context)); + ap->eh_context.i = ap->eh_info; + memset(&ap->eh_info, 0, sizeof(ap->eh_info)); + + ap->pflags |= ATA_PFLAG_EH_IN_PROGRESS; + ap->pflags &= ~ATA_PFLAG_EH_PENDING; + + spin_unlock_irqrestore(ap->lock, flags); + + /* invoke EH, skip if unloading or suspended */ + if (!(ap->pflags & (ATA_PFLAG_UNLOADING | ATA_PFLAG_SUSPENDED))) + ap->ops->error_handler(ap); + else + ata_eh_finish(ap); + + /* process port suspend request */ + ata_eh_handle_port_suspend(ap); + + /* Exception might have happend after ->error_handler + * recovered the port but before this point. Repeat + * EH in such case. + */ + spin_lock_irqsave(ap->lock, flags); + + if (ap->pflags & ATA_PFLAG_EH_PENDING) { + if (--repeat_cnt) { + ata_port_printk(ap, KERN_INFO, + "EH pending after completion, " + "repeating EH (cnt=%d)\n", repeat_cnt); + spin_unlock_irqrestore(ap->lock, flags); + goto repeat; + } + ata_port_printk(ap, KERN_ERR, "EH pending after %d " + "tries, giving up\n", ATA_EH_MAX_REPEAT); + } + + /* this run is complete, make sure EH info is clear */ + memset(&ap->eh_info, 0, sizeof(ap->eh_info)); + + /* Clear host_eh_scheduled while holding ap->lock such + * that if exception occurs after this point but + * before EH completion, SCSI midlayer will + * re-initiate EH. + */ + host->host_eh_scheduled = 0; + + spin_unlock_irqrestore(ap->lock, flags); + } else { + WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL); + ap->ops->eng_timeout(ap); + } + + /* finish or retry handled scmd's and clean up */ + WARN_ON(host->host_failed || !list_empty(&host->eh_cmd_q)); + + scsi_eh_flush_done_q(&ap->eh_done_q); + + /* clean up */ + spin_lock_irqsave(ap->lock, flags); + + if (ap->pflags & ATA_PFLAG_LOADING) + ap->pflags &= ~ATA_PFLAG_LOADING; + else if (ap->pflags & ATA_PFLAG_SCSI_HOTPLUG) + queue_work(ata_aux_wq, &ap->hotplug_task); + + if (ap->pflags & ATA_PFLAG_RECOVERED) + ata_port_printk(ap, KERN_INFO, "EH complete\n"); + + ap->pflags &= ~(ATA_PFLAG_SCSI_HOTPLUG | ATA_PFLAG_RECOVERED); + + /* tell wait_eh that we're done */ + ap->pflags &= ~ATA_PFLAG_EH_IN_PROGRESS; + wake_up_all(&ap->eh_wait_q); + + spin_unlock_irqrestore(ap->lock, flags); + + DPRINTK("EXIT\n"); +} + +/** + * ata_port_wait_eh - Wait for the currently pending EH to complete + * @ap: Port to wait EH for + * + * Wait until the currently pending EH is complete. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_port_wait_eh(struct ata_port *ap) +{ + unsigned long flags; + DEFINE_WAIT(wait); + + retry: + spin_lock_irqsave(ap->lock, flags); + + while (ap->pflags & (ATA_PFLAG_EH_PENDING | ATA_PFLAG_EH_IN_PROGRESS)) { + prepare_to_wait(&ap->eh_wait_q, &wait, TASK_UNINTERRUPTIBLE); + spin_unlock_irqrestore(ap->lock, flags); + schedule(); + spin_lock_irqsave(ap->lock, flags); + } + finish_wait(&ap->eh_wait_q, &wait); + + spin_unlock_irqrestore(ap->lock, flags); + + /* make sure SCSI EH is complete */ + if (scsi_host_in_recovery(ap->host)) { + msleep(10); + goto retry; + } +} + +/** + * ata_qc_timeout - Handle timeout of queued command + * @qc: Command that timed out + * + * Some part of the kernel (currently, only the SCSI layer) + * has noticed that the active command on port @ap has not + * completed after a specified length of time. Handle this + * condition by disabling DMA (if necessary) and completing + * transactions, with error if necessary. + * + * This also handles the case of the "lost interrupt", where + * for some reason (possibly hardware bug, possibly driver bug) + * an interrupt was not delivered to the driver, even though the + * transaction completed successfully. + * + * TODO: kill this function once old EH is gone. + * + * LOCKING: + * Inherited from SCSI layer (none, can sleep) + */ +static void ata_qc_timeout(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + u8 host_stat = 0, drv_stat; + unsigned long flags; + + DPRINTK("ENTER\n"); + + ap->hsm_task_state = HSM_ST_IDLE; + + spin_lock_irqsave(ap->lock, flags); + + switch (qc->tf.protocol) { + + case ATA_PROT_DMA: + case ATA_PROT_ATAPI_DMA: + host_stat = ap->ops->bmdma_status(ap); + + /* before we do anything else, clear DMA-Start bit */ + ap->ops->bmdma_stop(qc); + + /* fall through */ + + default: + ata_altstatus(ap); + drv_stat = ata_chk_status(ap); + + /* ack bmdma irq events */ + ap->ops->irq_clear(ap); + + ata_dev_printk(qc->dev, KERN_ERR, "command 0x%x timeout, " + "stat 0x%x host_stat 0x%x\n", + qc->tf.command, drv_stat, host_stat); + + /* complete taskfile transaction */ + qc->err_mask |= AC_ERR_TIMEOUT; + break; + } + + spin_unlock_irqrestore(ap->lock, flags); + + ata_eh_qc_complete(qc); + + DPRINTK("EXIT\n"); +} + +/** + * ata_eng_timeout - Handle timeout of queued command + * @ap: Port on which timed-out command is active + * + * Some part of the kernel (currently, only the SCSI layer) + * has noticed that the active command on port @ap has not + * completed after a specified length of time. Handle this + * condition by disabling DMA (if necessary) and completing + * transactions, with error if necessary. + * + * This also handles the case of the "lost interrupt", where + * for some reason (possibly hardware bug, possibly driver bug) + * an interrupt was not delivered to the driver, even though the + * transaction completed successfully. + * + * TODO: kill this function once old EH is gone. + * + * LOCKING: + * Inherited from SCSI layer (none, can sleep) + */ +void ata_eng_timeout(struct ata_port *ap) +{ + DPRINTK("ENTER\n"); + + ata_qc_timeout(ata_qc_from_tag(ap, ap->active_tag)); + + DPRINTK("EXIT\n"); +} + +/** + * ata_qc_schedule_eh - schedule qc for error handling + * @qc: command to schedule error handling for + * + * Schedule error handling for @qc. EH will kick in as soon as + * other commands are drained. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +void ata_qc_schedule_eh(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + WARN_ON(!ap->ops->error_handler); + + qc->flags |= ATA_QCFLAG_FAILED; + qc->ap->pflags |= ATA_PFLAG_EH_PENDING; + + /* The following will fail if timeout has already expired. + * ata_scsi_error() takes care of such scmds on EH entry. + * Note that ATA_QCFLAG_FAILED is unconditionally set after + * this function completes. + */ + scsi_req_abort_cmd(qc->scsicmd); +} + +/** + * ata_port_schedule_eh - schedule error handling without a qc + * @ap: ATA port to schedule EH for + * + * Schedule error handling for @ap. EH will kick in as soon as + * all commands are drained. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +void ata_port_schedule_eh(struct ata_port *ap) +{ + WARN_ON(!ap->ops->error_handler); + + ap->pflags |= ATA_PFLAG_EH_PENDING; + scsi_schedule_eh(ap->host); + + DPRINTK("port EH scheduled\n"); +} + +/** + * ata_port_abort - abort all qc's on the port + * @ap: ATA port to abort qc's for + * + * Abort all active qc's of @ap and schedule EH. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Number of aborted qc's. + */ +int ata_port_abort(struct ata_port *ap) +{ + int tag, nr_aborted = 0; + + WARN_ON(!ap->ops->error_handler); + + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag); + + if (qc) { + qc->flags |= ATA_QCFLAG_FAILED; + ata_qc_complete(qc); + nr_aborted++; + } + } + + if (!nr_aborted) + ata_port_schedule_eh(ap); + + return nr_aborted; +} + +/** + * __ata_port_freeze - freeze port + * @ap: ATA port to freeze + * + * This function is called when HSM violation or some other + * condition disrupts normal operation of the port. Frozen port + * is not allowed to perform any operation until the port is + * thawed, which usually follows a successful reset. + * + * ap->ops->freeze() callback can be used for freezing the port + * hardware-wise (e.g. mask interrupt and stop DMA engine). If a + * port cannot be frozen hardware-wise, the interrupt handler + * must ack and clear interrupts unconditionally while the port + * is frozen. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +static void __ata_port_freeze(struct ata_port *ap) +{ + WARN_ON(!ap->ops->error_handler); + + if (ap->ops->freeze) + ap->ops->freeze(ap); + + ap->pflags |= ATA_PFLAG_FROZEN; + + DPRINTK("ata%u port frozen\n", ap->id); +} + +/** + * ata_port_freeze - abort & freeze port + * @ap: ATA port to freeze + * + * Abort and freeze @ap. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Number of aborted commands. + */ +int ata_port_freeze(struct ata_port *ap) +{ + int nr_aborted; + + WARN_ON(!ap->ops->error_handler); + + nr_aborted = ata_port_abort(ap); + __ata_port_freeze(ap); + + return nr_aborted; +} + +/** + * ata_eh_freeze_port - EH helper to freeze port + * @ap: ATA port to freeze + * + * Freeze @ap. + * + * LOCKING: + * None. + */ +void ata_eh_freeze_port(struct ata_port *ap) +{ + unsigned long flags; + + if (!ap->ops->error_handler) + return; + + spin_lock_irqsave(ap->lock, flags); + __ata_port_freeze(ap); + spin_unlock_irqrestore(ap->lock, flags); +} + +/** + * ata_port_thaw_port - EH helper to thaw port + * @ap: ATA port to thaw + * + * Thaw frozen port @ap. + * + * LOCKING: + * None. + */ +void ata_eh_thaw_port(struct ata_port *ap) +{ + unsigned long flags; + + if (!ap->ops->error_handler) + return; + + spin_lock_irqsave(ap->lock, flags); + + ap->pflags &= ~ATA_PFLAG_FROZEN; + + if (ap->ops->thaw) + ap->ops->thaw(ap); + + spin_unlock_irqrestore(ap->lock, flags); + + DPRINTK("ata%u port thawed\n", ap->id); +} + +static void ata_eh_scsidone(struct scsi_cmnd *scmd) +{ + /* nada */ +} + +static void __ata_eh_qc_complete(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct scsi_cmnd *scmd = qc->scsicmd; + unsigned long flags; + + spin_lock_irqsave(ap->lock, flags); + qc->scsidone = ata_eh_scsidone; + __ata_qc_complete(qc); + WARN_ON(ata_tag_valid(qc->tag)); + spin_unlock_irqrestore(ap->lock, flags); + + scsi_eh_finish_cmd(scmd, &ap->eh_done_q); +} + +/** + * ata_eh_qc_complete - Complete an active ATA command from EH + * @qc: Command to complete + * + * Indicate to the mid and upper layers that an ATA command has + * completed. To be used from EH. + */ +void ata_eh_qc_complete(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *scmd = qc->scsicmd; + scmd->retries = scmd->allowed; + __ata_eh_qc_complete(qc); +} + +/** + * ata_eh_qc_retry - Tell midlayer to retry an ATA command after EH + * @qc: Command to retry + * + * Indicate to the mid and upper layers that an ATA command + * should be retried. To be used from EH. + * + * SCSI midlayer limits the number of retries to scmd->allowed. + * scmd->retries is decremented for commands which get retried + * due to unrelated failures (qc->err_mask is zero). + */ +void ata_eh_qc_retry(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *scmd = qc->scsicmd; + if (!qc->err_mask && scmd->retries) + scmd->retries--; + __ata_eh_qc_complete(qc); +} + +/** + * ata_eh_detach_dev - detach ATA device + * @dev: ATA device to detach + * + * Detach @dev. + * + * LOCKING: + * None. + */ +static void ata_eh_detach_dev(struct ata_device *dev) +{ + struct ata_port *ap = dev->ap; + unsigned long flags; + + ata_dev_disable(dev); + + spin_lock_irqsave(ap->lock, flags); + + dev->flags &= ~ATA_DFLAG_DETACH; + + if (ata_scsi_offline_dev(dev)) { + dev->flags |= ATA_DFLAG_DETACHED; + ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG; + } + + /* clear per-dev EH actions */ + ata_eh_clear_action(dev, &ap->eh_info, ATA_EH_PERDEV_MASK); + ata_eh_clear_action(dev, &ap->eh_context.i, ATA_EH_PERDEV_MASK); + + spin_unlock_irqrestore(ap->lock, flags); +} + +/** + * ata_eh_about_to_do - about to perform eh_action + * @ap: target ATA port + * @dev: target ATA dev for per-dev action (can be NULL) + * @action: action about to be performed + * + * Called just before performing EH actions to clear related bits + * in @ap->eh_info such that eh actions are not unnecessarily + * repeated. + * + * LOCKING: + * None. + */ +static void ata_eh_about_to_do(struct ata_port *ap, struct ata_device *dev, + unsigned int action) +{ + unsigned long flags; + struct ata_eh_info *ehi = &ap->eh_info; + struct ata_eh_context *ehc = &ap->eh_context; + + spin_lock_irqsave(ap->lock, flags); + + /* Reset is represented by combination of actions and EHI + * flags. Suck in all related bits before clearing eh_info to + * avoid losing requested action. + */ + if (action & ATA_EH_RESET_MASK) { + ehc->i.action |= ehi->action & ATA_EH_RESET_MASK; + ehc->i.flags |= ehi->flags & ATA_EHI_RESET_MODIFIER_MASK; + + /* make sure all reset actions are cleared & clear EHI flags */ + action |= ATA_EH_RESET_MASK; + ehi->flags &= ~ATA_EHI_RESET_MODIFIER_MASK; + } + + ata_eh_clear_action(dev, ehi, action); + + if (!(ehc->i.flags & ATA_EHI_QUIET)) + ap->pflags |= ATA_PFLAG_RECOVERED; + + spin_unlock_irqrestore(ap->lock, flags); +} + +/** + * ata_eh_done - EH action complete + * @ap: target ATA port + * @dev: target ATA dev for per-dev action (can be NULL) + * @action: action just completed + * + * Called right after performing EH actions to clear related bits + * in @ap->eh_context. + * + * LOCKING: + * None. + */ +static void ata_eh_done(struct ata_port *ap, struct ata_device *dev, + unsigned int action) +{ + /* if reset is complete, clear all reset actions & reset modifier */ + if (action & ATA_EH_RESET_MASK) { + action |= ATA_EH_RESET_MASK; + ap->eh_context.i.flags &= ~ATA_EHI_RESET_MODIFIER_MASK; + } + + ata_eh_clear_action(dev, &ap->eh_context.i, action); +} + +/** + * ata_err_string - convert err_mask to descriptive string + * @err_mask: error mask to convert to string + * + * Convert @err_mask to descriptive string. Errors are + * prioritized according to severity and only the most severe + * error is reported. + * + * LOCKING: + * None. + * + * RETURNS: + * Descriptive string for @err_mask + */ +static const char * ata_err_string(unsigned int err_mask) +{ + if (err_mask & AC_ERR_HOST_BUS) + return "host bus error"; + if (err_mask & AC_ERR_ATA_BUS) + return "ATA bus error"; + if (err_mask & AC_ERR_TIMEOUT) + return "timeout"; + if (err_mask & AC_ERR_HSM) + return "HSM violation"; + if (err_mask & AC_ERR_SYSTEM) + return "internal error"; + if (err_mask & AC_ERR_MEDIA) + return "media error"; + if (err_mask & AC_ERR_INVALID) + return "invalid argument"; + if (err_mask & AC_ERR_DEV) + return "device error"; + return "unknown error"; +} + +/** + * ata_read_log_page - read a specific log page + * @dev: target device + * @page: page to read + * @buf: buffer to store read page + * @sectors: number of sectors to read + * + * Read log page using READ_LOG_EXT command. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, AC_ERR_* mask otherwise. + */ +static unsigned int ata_read_log_page(struct ata_device *dev, + u8 page, void *buf, unsigned int sectors) +{ + struct ata_taskfile tf; + unsigned int err_mask; + + DPRINTK("read log page - page %d\n", page); + + ata_tf_init(dev, &tf); + tf.command = ATA_CMD_READ_LOG_EXT; + tf.lbal = page; + tf.nsect = sectors; + tf.hob_nsect = sectors >> 8; + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_LBA48 | ATA_TFLAG_DEVICE; + tf.protocol = ATA_PROT_PIO; + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE, + buf, sectors * ATA_SECT_SIZE); + + DPRINTK("EXIT, err_mask=%x\n", err_mask); + return err_mask; +} + +/** + * ata_eh_read_log_10h - Read log page 10h for NCQ error details + * @dev: Device to read log page 10h from + * @tag: Resulting tag of the failed command + * @tf: Resulting taskfile registers of the failed command + * + * Read log page 10h to obtain NCQ error details and clear error + * condition. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +static int ata_eh_read_log_10h(struct ata_device *dev, + int *tag, struct ata_taskfile *tf) +{ + u8 *buf = dev->ap->sector_buf; + unsigned int err_mask; + u8 csum; + int i; + + err_mask = ata_read_log_page(dev, ATA_LOG_SATA_NCQ, buf, 1); + if (err_mask) + return -EIO; + + csum = 0; + for (i = 0; i < ATA_SECT_SIZE; i++) + csum += buf[i]; + if (csum) + ata_dev_printk(dev, KERN_WARNING, + "invalid checksum 0x%x on log page 10h\n", csum); + + if (buf[0] & 0x80) + return -ENOENT; + + *tag = buf[0] & 0x1f; + + tf->command = buf[2]; + tf->feature = buf[3]; + tf->lbal = buf[4]; + tf->lbam = buf[5]; + tf->lbah = buf[6]; + tf->device = buf[7]; + tf->hob_lbal = buf[8]; + tf->hob_lbam = buf[9]; + tf->hob_lbah = buf[10]; + tf->nsect = buf[12]; + tf->hob_nsect = buf[13]; + + return 0; +} + +/** + * atapi_eh_request_sense - perform ATAPI REQUEST_SENSE + * @dev: device to perform REQUEST_SENSE to + * @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long) + * + * Perform ATAPI REQUEST_SENSE after the device reported CHECK + * SENSE. This function is EH helper. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, AC_ERR_* mask on failure + */ +static unsigned int atapi_eh_request_sense(struct ata_device *dev, + unsigned char *sense_buf) +{ + struct ata_port *ap = dev->ap; + struct ata_taskfile tf; + u8 cdb[ATAPI_CDB_LEN]; + + DPRINTK("ATAPI request sense\n"); + + ata_tf_init(dev, &tf); + + /* FIXME: is this needed? */ + memset(sense_buf, 0, SCSI_SENSE_BUFFERSIZE); + + /* XXX: why tf_read here? */ + ap->ops->tf_read(ap, &tf); + + /* fill these in, for the case where they are -not- overwritten */ + sense_buf[0] = 0x70; + sense_buf[2] = tf.feature >> 4; + + memset(cdb, 0, ATAPI_CDB_LEN); + cdb[0] = REQUEST_SENSE; + cdb[4] = SCSI_SENSE_BUFFERSIZE; + + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf.command = ATA_CMD_PACKET; + + /* is it pointless to prefer PIO for "safety reasons"? */ + if (ap->flags & ATA_FLAG_PIO_DMA) { + tf.protocol = ATA_PROT_ATAPI_DMA; + tf.feature |= ATAPI_PKT_DMA; + } else { + tf.protocol = ATA_PROT_ATAPI; + tf.lbam = (8 * 1024) & 0xff; + tf.lbah = (8 * 1024) >> 8; + } + + return ata_exec_internal(dev, &tf, cdb, DMA_FROM_DEVICE, + sense_buf, SCSI_SENSE_BUFFERSIZE); +} + +/** + * ata_eh_analyze_serror - analyze SError for a failed port + * @ap: ATA port to analyze SError for + * + * Analyze SError if available and further determine cause of + * failure. + * + * LOCKING: + * None. + */ +static void ata_eh_analyze_serror(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + u32 serror = ehc->i.serror; + unsigned int err_mask = 0, action = 0; + + if (serror & SERR_PERSISTENT) { + err_mask |= AC_ERR_ATA_BUS; + action |= ATA_EH_HARDRESET; + } + if (serror & + (SERR_DATA_RECOVERED | SERR_COMM_RECOVERED | SERR_DATA)) { + err_mask |= AC_ERR_ATA_BUS; + action |= ATA_EH_SOFTRESET; + } + if (serror & SERR_PROTOCOL) { + err_mask |= AC_ERR_HSM; + action |= ATA_EH_SOFTRESET; + } + if (serror & SERR_INTERNAL) { + err_mask |= AC_ERR_SYSTEM; + action |= ATA_EH_SOFTRESET; + } + if (serror & (SERR_PHYRDY_CHG | SERR_DEV_XCHG)) + ata_ehi_hotplugged(&ehc->i); + + ehc->i.err_mask |= err_mask; + ehc->i.action |= action; +} + +/** + * ata_eh_analyze_ncq_error - analyze NCQ error + * @ap: ATA port to analyze NCQ error for + * + * Read log page 10h, determine the offending qc and acquire + * error status TF. For NCQ device errors, all LLDDs have to do + * is setting AC_ERR_DEV in ehi->err_mask. This function takes + * care of the rest. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +static void ata_eh_analyze_ncq_error(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + struct ata_device *dev = ap->device; + struct ata_queued_cmd *qc; + struct ata_taskfile tf; + int tag, rc; + + /* if frozen, we can't do much */ + if (ap->pflags & ATA_PFLAG_FROZEN) + return; + + /* is it NCQ device error? */ + if (!ap->sactive || !(ehc->i.err_mask & AC_ERR_DEV)) + return; + + /* has LLDD analyzed already? */ + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + qc = __ata_qc_from_tag(ap, tag); + + if (!(qc->flags & ATA_QCFLAG_FAILED)) + continue; + + if (qc->err_mask) + return; + } + + /* okay, this error is ours */ + rc = ata_eh_read_log_10h(dev, &tag, &tf); + if (rc) { + ata_port_printk(ap, KERN_ERR, "failed to read log page 10h " + "(errno=%d)\n", rc); + return; + } + + if (!(ap->sactive & (1 << tag))) { + ata_port_printk(ap, KERN_ERR, "log page 10h reported " + "inactive tag %d\n", tag); + return; + } + + /* we've got the perpetrator, condemn it */ + qc = __ata_qc_from_tag(ap, tag); + memcpy(&qc->result_tf, &tf, sizeof(tf)); + qc->err_mask |= AC_ERR_DEV; + ehc->i.err_mask &= ~AC_ERR_DEV; +} + +/** + * ata_eh_analyze_tf - analyze taskfile of a failed qc + * @qc: qc to analyze + * @tf: Taskfile registers to analyze + * + * Analyze taskfile of @qc and further determine cause of + * failure. This function also requests ATAPI sense data if + * avaliable. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * Determined recovery action + */ +static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc, + const struct ata_taskfile *tf) +{ + unsigned int tmp, action = 0; + u8 stat = tf->command, err = tf->feature; + + if ((stat & (ATA_BUSY | ATA_DRQ | ATA_DRDY)) != ATA_DRDY) { + qc->err_mask |= AC_ERR_HSM; + return ATA_EH_SOFTRESET; + } + + if (!(qc->err_mask & AC_ERR_DEV)) + return 0; + + switch (qc->dev->class) { + case ATA_DEV_ATA: + if (err & ATA_ICRC) + qc->err_mask |= AC_ERR_ATA_BUS; + if (err & ATA_UNC) + qc->err_mask |= AC_ERR_MEDIA; + if (err & ATA_IDNF) + qc->err_mask |= AC_ERR_INVALID; + break; + + case ATA_DEV_ATAPI: + tmp = atapi_eh_request_sense(qc->dev, + qc->scsicmd->sense_buffer); + if (!tmp) { + /* ATA_QCFLAG_SENSE_VALID is used to tell + * atapi_qc_complete() that sense data is + * already valid. + * + * TODO: interpret sense data and set + * appropriate err_mask. + */ + qc->flags |= ATA_QCFLAG_SENSE_VALID; + } else + qc->err_mask |= tmp; + } + + if (qc->err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT | AC_ERR_ATA_BUS)) + action |= ATA_EH_SOFTRESET; + + return action; +} + +static int ata_eh_categorize_ering_entry(struct ata_ering_entry *ent) +{ + if (ent->err_mask & (AC_ERR_ATA_BUS | AC_ERR_TIMEOUT)) + return 1; + + if (ent->is_io) { + if (ent->err_mask & AC_ERR_HSM) + return 1; + if ((ent->err_mask & + (AC_ERR_DEV|AC_ERR_MEDIA|AC_ERR_INVALID)) == AC_ERR_DEV) + return 2; + } + + return 0; +} + +struct speed_down_needed_arg { + u64 since; + int nr_errors[3]; +}; + +static int speed_down_needed_cb(struct ata_ering_entry *ent, void *void_arg) +{ + struct speed_down_needed_arg *arg = void_arg; + + if (ent->timestamp < arg->since) + return -1; + + arg->nr_errors[ata_eh_categorize_ering_entry(ent)]++; + return 0; +} + +/** + * ata_eh_speed_down_needed - Determine wheter speed down is necessary + * @dev: Device of interest + * + * This function examines error ring of @dev and determines + * whether speed down is necessary. Speed down is necessary if + * there have been more than 3 of Cat-1 errors or 10 of Cat-2 + * errors during last 15 minutes. + * + * Cat-1 errors are ATA_BUS, TIMEOUT for any command and HSM + * violation for known supported commands. + * + * Cat-2 errors are unclassified DEV error for known supported + * command. + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * 1 if speed down is necessary, 0 otherwise + */ +static int ata_eh_speed_down_needed(struct ata_device *dev) +{ + const u64 interval = 15LLU * 60 * HZ; + static const int err_limits[3] = { -1, 3, 10 }; + struct speed_down_needed_arg arg; + struct ata_ering_entry *ent; + int err_cat; + u64 j64; + + ent = ata_ering_top(&dev->ering); + if (!ent) + return 0; + + err_cat = ata_eh_categorize_ering_entry(ent); + if (err_cat == 0) + return 0; + + memset(&arg, 0, sizeof(arg)); + + j64 = get_jiffies_64(); + if (j64 >= interval) + arg.since = j64 - interval; + else + arg.since = 0; + + ata_ering_map(&dev->ering, speed_down_needed_cb, &arg); + + return arg.nr_errors[err_cat] > err_limits[err_cat]; +} + +/** + * ata_eh_speed_down - record error and speed down if necessary + * @dev: Failed device + * @is_io: Did the device fail during normal IO? + * @err_mask: err_mask of the error + * + * Record error and examine error history to determine whether + * adjusting transmission speed is necessary. It also sets + * transmission limits appropriately if such adjustment is + * necessary. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise + */ +static int ata_eh_speed_down(struct ata_device *dev, int is_io, + unsigned int err_mask) +{ + if (!err_mask) + return 0; + + /* record error and determine whether speed down is necessary */ + ata_ering_record(&dev->ering, is_io, err_mask); + + if (!ata_eh_speed_down_needed(dev)) + return 0; + + /* speed down SATA link speed if possible */ + if (sata_down_spd_limit(dev->ap) == 0) + return ATA_EH_HARDRESET; + + /* lower transfer mode */ + if (ata_down_xfermask_limit(dev, 0) == 0) + return ATA_EH_SOFTRESET; + + ata_dev_printk(dev, KERN_ERR, + "speed down requested but no transfer mode left\n"); + return 0; +} + +/** + * ata_eh_autopsy - analyze error and determine recovery action + * @ap: ATA port to perform autopsy on + * + * Analyze why @ap failed and determine which recovery action is + * needed. This function also sets more detailed AC_ERR_* values + * and fills sense data for ATAPI CHECK SENSE. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +static void ata_eh_autopsy(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + unsigned int all_err_mask = 0; + int tag, is_io = 0; + u32 serror; + int rc; + + DPRINTK("ENTER\n"); + + if (ehc->i.flags & ATA_EHI_NO_AUTOPSY) + return; + + /* obtain and analyze SError */ + rc = sata_scr_read(ap, SCR_ERROR, &serror); + if (rc == 0) { + ehc->i.serror |= serror; + ata_eh_analyze_serror(ap); + } else if (rc != -EOPNOTSUPP) + ehc->i.action |= ATA_EH_HARDRESET; + + /* analyze NCQ failure */ + ata_eh_analyze_ncq_error(ap); + + /* any real error trumps AC_ERR_OTHER */ + if (ehc->i.err_mask & ~AC_ERR_OTHER) + ehc->i.err_mask &= ~AC_ERR_OTHER; + + all_err_mask |= ehc->i.err_mask; + + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); + + if (!(qc->flags & ATA_QCFLAG_FAILED)) + continue; + + /* inherit upper level err_mask */ + qc->err_mask |= ehc->i.err_mask; + + /* analyze TF */ + ehc->i.action |= ata_eh_analyze_tf(qc, &qc->result_tf); + + /* DEV errors are probably spurious in case of ATA_BUS error */ + if (qc->err_mask & AC_ERR_ATA_BUS) + qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_MEDIA | + AC_ERR_INVALID); + + /* any real error trumps unknown error */ + if (qc->err_mask & ~AC_ERR_OTHER) + qc->err_mask &= ~AC_ERR_OTHER; + + /* SENSE_VALID trumps dev/unknown error and revalidation */ + if (qc->flags & ATA_QCFLAG_SENSE_VALID) { + qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_OTHER); + ehc->i.action &= ~ATA_EH_REVALIDATE; + } + + /* accumulate error info */ + ehc->i.dev = qc->dev; + all_err_mask |= qc->err_mask; + if (qc->flags & ATA_QCFLAG_IO) + is_io = 1; + } + + /* enforce default EH actions */ + if (ap->pflags & ATA_PFLAG_FROZEN || + all_err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT)) + ehc->i.action |= ATA_EH_SOFTRESET; + else if (all_err_mask) + ehc->i.action |= ATA_EH_REVALIDATE; + + /* if we have offending qcs and the associated failed device */ + if (ehc->i.dev) { + /* speed down */ + ehc->i.action |= ata_eh_speed_down(ehc->i.dev, is_io, + all_err_mask); + + /* perform per-dev EH action only on the offending device */ + ehc->i.dev_action[ehc->i.dev->devno] |= + ehc->i.action & ATA_EH_PERDEV_MASK; + ehc->i.action &= ~ATA_EH_PERDEV_MASK; + } + + DPRINTK("EXIT\n"); +} + +/** + * ata_eh_report - report error handling to user + * @ap: ATA port EH is going on + * + * Report EH to user. + * + * LOCKING: + * None. + */ +static void ata_eh_report(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + const char *frozen, *desc; + int tag, nr_failed = 0; + + desc = NULL; + if (ehc->i.desc[0] != '\0') + desc = ehc->i.desc; + + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); + + if (!(qc->flags & ATA_QCFLAG_FAILED)) + continue; + if (qc->flags & ATA_QCFLAG_SENSE_VALID && !qc->err_mask) + continue; + + nr_failed++; + } + + if (!nr_failed && !ehc->i.err_mask) + return; + + frozen = ""; + if (ap->pflags & ATA_PFLAG_FROZEN) + frozen = " frozen"; + + if (ehc->i.dev) { + ata_dev_printk(ehc->i.dev, KERN_ERR, "exception Emask 0x%x " + "SAct 0x%x SErr 0x%x action 0x%x%s\n", + ehc->i.err_mask, ap->sactive, ehc->i.serror, + ehc->i.action, frozen); + if (desc) + ata_dev_printk(ehc->i.dev, KERN_ERR, "(%s)\n", desc); + } else { + ata_port_printk(ap, KERN_ERR, "exception Emask 0x%x " + "SAct 0x%x SErr 0x%x action 0x%x%s\n", + ehc->i.err_mask, ap->sactive, ehc->i.serror, + ehc->i.action, frozen); + if (desc) + ata_port_printk(ap, KERN_ERR, "(%s)\n", desc); + } + + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); + + if (!(qc->flags & ATA_QCFLAG_FAILED) || !qc->err_mask) + continue; + + ata_dev_printk(qc->dev, KERN_ERR, "tag %d cmd 0x%x " + "Emask 0x%x stat 0x%x err 0x%x (%s)\n", + qc->tag, qc->tf.command, qc->err_mask, + qc->result_tf.command, qc->result_tf.feature, + ata_err_string(qc->err_mask)); + } +} + +static int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset, + unsigned int *classes) +{ + int i, rc; + + for (i = 0; i < ATA_MAX_DEVICES; i++) + classes[i] = ATA_DEV_UNKNOWN; + + rc = reset(ap, classes); + if (rc) + return rc; + + /* If any class isn't ATA_DEV_UNKNOWN, consider classification + * is complete and convert all ATA_DEV_UNKNOWN to + * ATA_DEV_NONE. + */ + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (classes[i] != ATA_DEV_UNKNOWN) + break; + + if (i < ATA_MAX_DEVICES) + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (classes[i] == ATA_DEV_UNKNOWN) + classes[i] = ATA_DEV_NONE; + + return 0; +} + +static int ata_eh_followup_srst_needed(int rc, int classify, + const unsigned int *classes) +{ + if (rc == -EAGAIN) + return 1; + if (rc != 0) + return 0; + if (classify && classes[0] == ATA_DEV_UNKNOWN) + return 1; + return 0; +} + +static int ata_eh_reset(struct ata_port *ap, int classify, + ata_prereset_fn_t prereset, ata_reset_fn_t softreset, + ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) +{ + struct ata_eh_context *ehc = &ap->eh_context; + unsigned int *classes = ehc->classes; + int tries = ATA_EH_RESET_TRIES; + int verbose = !(ehc->i.flags & ATA_EHI_QUIET); + unsigned int action; + ata_reset_fn_t reset; + int i, did_followup_srst, rc; + + /* about to reset */ + ata_eh_about_to_do(ap, NULL, ehc->i.action & ATA_EH_RESET_MASK); + + /* Determine which reset to use and record in ehc->i.action. + * prereset() may examine and modify it. + */ + action = ehc->i.action; + ehc->i.action &= ~ATA_EH_RESET_MASK; + if (softreset && (!hardreset || (!sata_set_spd_needed(ap) && + !(action & ATA_EH_HARDRESET)))) + ehc->i.action |= ATA_EH_SOFTRESET; + else + ehc->i.action |= ATA_EH_HARDRESET; + + if (prereset) { + rc = prereset(ap); + if (rc) { + ata_port_printk(ap, KERN_ERR, + "prereset failed (errno=%d)\n", rc); + return rc; + } + } + + /* prereset() might have modified ehc->i.action */ + if (ehc->i.action & ATA_EH_HARDRESET) + reset = hardreset; + else if (ehc->i.action & ATA_EH_SOFTRESET) + reset = softreset; + else { + /* prereset told us not to reset, bang classes and return */ + for (i = 0; i < ATA_MAX_DEVICES; i++) + classes[i] = ATA_DEV_NONE; + return 0; + } + + /* did prereset() screw up? if so, fix up to avoid oopsing */ + if (!reset) { + ata_port_printk(ap, KERN_ERR, "BUG: prereset() requested " + "invalid reset type\n"); + if (softreset) + reset = softreset; + else + reset = hardreset; + } + + retry: + /* shut up during boot probing */ + if (verbose) + ata_port_printk(ap, KERN_INFO, "%s resetting port\n", + reset == softreset ? "soft" : "hard"); + + /* mark that this EH session started with reset */ + ehc->i.flags |= ATA_EHI_DID_RESET; + + rc = ata_do_reset(ap, reset, classes); + + did_followup_srst = 0; + if (reset == hardreset && + ata_eh_followup_srst_needed(rc, classify, classes)) { + /* okay, let's do follow-up softreset */ + did_followup_srst = 1; + reset = softreset; + + if (!reset) { + ata_port_printk(ap, KERN_ERR, + "follow-up softreset required " + "but no softreset avaliable\n"); + return -EINVAL; + } + + ata_eh_about_to_do(ap, NULL, ATA_EH_RESET_MASK); + rc = ata_do_reset(ap, reset, classes); + + if (rc == 0 && classify && + classes[0] == ATA_DEV_UNKNOWN) { + ata_port_printk(ap, KERN_ERR, + "classification failed\n"); + return -EINVAL; + } + } + + if (rc && --tries) { + const char *type; + + if (reset == softreset) { + if (did_followup_srst) + type = "follow-up soft"; + else + type = "soft"; + } else + type = "hard"; + + ata_port_printk(ap, KERN_WARNING, + "%sreset failed, retrying in 5 secs\n", type); + ssleep(5); + + if (reset == hardreset) + sata_down_spd_limit(ap); + if (hardreset) + reset = hardreset; + goto retry; + } + + if (rc == 0) { + /* After the reset, the device state is PIO 0 and the + * controller state is undefined. Record the mode. + */ + for (i = 0; i < ATA_MAX_DEVICES; i++) + ap->device[i].pio_mode = XFER_PIO_0; + + if (postreset) + postreset(ap, classes); + + /* reset successful, schedule revalidation */ + ata_eh_done(ap, NULL, ehc->i.action & ATA_EH_RESET_MASK); + ehc->i.action |= ATA_EH_REVALIDATE; + } + + return rc; +} + +static int ata_eh_revalidate_and_attach(struct ata_port *ap, + struct ata_device **r_failed_dev) +{ + struct ata_eh_context *ehc = &ap->eh_context; + struct ata_device *dev; + unsigned long flags; + int i, rc = 0; + + DPRINTK("ENTER\n"); + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + unsigned int action; + + dev = &ap->device[i]; + action = ata_eh_dev_action(dev); + + if (action & ATA_EH_REVALIDATE && ata_dev_ready(dev)) { + if (ata_port_offline(ap)) { + rc = -EIO; + break; + } + + ata_eh_about_to_do(ap, dev, ATA_EH_REVALIDATE); + rc = ata_dev_revalidate(dev, + ehc->i.flags & ATA_EHI_DID_RESET); + if (rc) + break; + + ata_eh_done(ap, dev, ATA_EH_REVALIDATE); + + /* schedule the scsi_rescan_device() here */ + queue_work(ata_aux_wq, &(ap->scsi_rescan_task)); + } else if (dev->class == ATA_DEV_UNKNOWN && + ehc->tries[dev->devno] && + ata_class_enabled(ehc->classes[dev->devno])) { + dev->class = ehc->classes[dev->devno]; + + rc = ata_dev_read_id(dev, &dev->class, 1, dev->id); + if (rc == 0) + rc = ata_dev_configure(dev, 1); + + if (rc) { + dev->class = ATA_DEV_UNKNOWN; + break; + } + + spin_lock_irqsave(ap->lock, flags); + ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG; + spin_unlock_irqrestore(ap->lock, flags); + } + } + + if (rc) + *r_failed_dev = dev; + + DPRINTK("EXIT\n"); + return rc; +} + +/** + * ata_eh_suspend - handle suspend EH action + * @ap: target host port + * @r_failed_dev: result parameter to indicate failing device + * + * Handle suspend EH action. Disk devices are spinned down and + * other types of devices are just marked suspended. Once + * suspended, no EH action to the device is allowed until it is + * resumed. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise + */ +static int ata_eh_suspend(struct ata_port *ap, struct ata_device **r_failed_dev) +{ + struct ata_device *dev; + int i, rc = 0; + + DPRINTK("ENTER\n"); + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + unsigned long flags; + unsigned int action, err_mask; + + dev = &ap->device[i]; + action = ata_eh_dev_action(dev); + + if (!ata_dev_enabled(dev) || !(action & ATA_EH_SUSPEND)) + continue; + + WARN_ON(dev->flags & ATA_DFLAG_SUSPENDED); + + ata_eh_about_to_do(ap, dev, ATA_EH_SUSPEND); + + if (dev->class == ATA_DEV_ATA && !(action & ATA_EH_PM_FREEZE)) { + /* flush cache */ + rc = ata_flush_cache(dev); + if (rc) + break; + + /* spin down */ + err_mask = ata_do_simple_cmd(dev, ATA_CMD_STANDBYNOW1); + if (err_mask) { + ata_dev_printk(dev, KERN_ERR, "failed to " + "spin down (err_mask=0x%x)\n", + err_mask); + rc = -EIO; + break; + } + } + + spin_lock_irqsave(ap->lock, flags); + dev->flags |= ATA_DFLAG_SUSPENDED; + spin_unlock_irqrestore(ap->lock, flags); + + ata_eh_done(ap, dev, ATA_EH_SUSPEND); + } + + if (rc) + *r_failed_dev = dev; + + DPRINTK("EXIT\n"); + return 0; +} + +/** + * ata_eh_prep_resume - prep for resume EH action + * @ap: target host port + * + * Clear SUSPENDED in preparation for scheduled resume actions. + * This allows other parts of EH to access the devices being + * resumed. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +static void ata_eh_prep_resume(struct ata_port *ap) +{ + struct ata_device *dev; + unsigned long flags; + int i; + + DPRINTK("ENTER\n"); + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + unsigned int action; + + dev = &ap->device[i]; + action = ata_eh_dev_action(dev); + + if (!ata_dev_enabled(dev) || !(action & ATA_EH_RESUME)) + continue; + + spin_lock_irqsave(ap->lock, flags); + dev->flags &= ~ATA_DFLAG_SUSPENDED; + spin_unlock_irqrestore(ap->lock, flags); + } + + DPRINTK("EXIT\n"); +} + +/** + * ata_eh_resume - handle resume EH action + * @ap: target host port + * @r_failed_dev: result parameter to indicate failing device + * + * Handle resume EH action. Target devices are already reset and + * revalidated. Spinning up is the only operation left. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise + */ +static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev) +{ + struct ata_device *dev; + int i, rc = 0; + + DPRINTK("ENTER\n"); + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + unsigned int action, err_mask; + + dev = &ap->device[i]; + action = ata_eh_dev_action(dev); + + if (!ata_dev_enabled(dev) || !(action & ATA_EH_RESUME)) + continue; + + ata_eh_about_to_do(ap, dev, ATA_EH_RESUME); + + if (dev->class == ATA_DEV_ATA && !(action & ATA_EH_PM_FREEZE)) { + err_mask = ata_do_simple_cmd(dev, + ATA_CMD_IDLEIMMEDIATE); + if (err_mask) { + ata_dev_printk(dev, KERN_ERR, "failed to " + "spin up (err_mask=0x%x)\n", + err_mask); + rc = -EIO; + break; + } + } + + ata_eh_done(ap, dev, ATA_EH_RESUME); + } + + if (rc) + *r_failed_dev = dev; + + DPRINTK("EXIT\n"); + return 0; +} + +static int ata_port_nr_enabled(struct ata_port *ap) +{ + int i, cnt = 0; + + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (ata_dev_enabled(&ap->device[i])) + cnt++; + return cnt; +} + +static int ata_port_nr_vacant(struct ata_port *ap) +{ + int i, cnt = 0; + + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (ap->device[i].class == ATA_DEV_UNKNOWN) + cnt++; + return cnt; +} + +static int ata_eh_skip_recovery(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + int i; + + /* skip if all possible devices are suspended */ + for (i = 0; i < ata_port_max_devices(ap); i++) { + struct ata_device *dev = &ap->device[i]; + + if (!(dev->flags & ATA_DFLAG_SUSPENDED)) + break; + } + + if (i == ata_port_max_devices(ap)) + return 1; + + /* thaw frozen port, resume link and recover failed devices */ + if ((ap->pflags & ATA_PFLAG_FROZEN) || + (ehc->i.flags & ATA_EHI_RESUME_LINK) || ata_port_nr_enabled(ap)) + return 0; + + /* skip if class codes for all vacant slots are ATA_DEV_NONE */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + + if (dev->class == ATA_DEV_UNKNOWN && + ehc->classes[dev->devno] != ATA_DEV_NONE) + return 0; + } + + return 1; +} + +/** + * ata_eh_recover - recover host port after error + * @ap: host port to recover + * @prereset: prereset method (can be NULL) + * @softreset: softreset method (can be NULL) + * @hardreset: hardreset method (can be NULL) + * @postreset: postreset method (can be NULL) + * + * This is the alpha and omega, eum and yang, heart and soul of + * libata exception handling. On entry, actions required to + * recover the port and hotplug requests are recorded in + * eh_context. This function executes all the operations with + * appropriate retrials and fallbacks to resurrect failed + * devices, detach goners and greet newcomers. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno on failure. + */ +static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, + ata_reset_fn_t softreset, ata_reset_fn_t hardreset, + ata_postreset_fn_t postreset) +{ + struct ata_eh_context *ehc = &ap->eh_context; + struct ata_device *dev; + int down_xfermask, i, rc; + + DPRINTK("ENTER\n"); + + /* prep for recovery */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + + ehc->tries[dev->devno] = ATA_EH_DEV_TRIES; + + /* process hotplug request */ + if (dev->flags & ATA_DFLAG_DETACH) + ata_eh_detach_dev(dev); + + if (!ata_dev_enabled(dev) && + ((ehc->i.probe_mask & (1 << dev->devno)) && + !(ehc->did_probe_mask & (1 << dev->devno)))) { + ata_eh_detach_dev(dev); + ata_dev_init(dev); + ehc->did_probe_mask |= (1 << dev->devno); + ehc->i.action |= ATA_EH_SOFTRESET; + } + } + + retry: + down_xfermask = 0; + rc = 0; + + /* if UNLOADING, finish immediately */ + if (ap->pflags & ATA_PFLAG_UNLOADING) + goto out; + + /* prep for resume */ + ata_eh_prep_resume(ap); + + /* skip EH if possible. */ + if (ata_eh_skip_recovery(ap)) + ehc->i.action = 0; + + for (i = 0; i < ATA_MAX_DEVICES; i++) + ehc->classes[i] = ATA_DEV_UNKNOWN; + + /* reset */ + if (ehc->i.action & ATA_EH_RESET_MASK) { + ata_eh_freeze_port(ap); + + rc = ata_eh_reset(ap, ata_port_nr_vacant(ap), prereset, + softreset, hardreset, postreset); + if (rc) { + ata_port_printk(ap, KERN_ERR, + "reset failed, giving up\n"); + goto out; + } + + ata_eh_thaw_port(ap); + } + + /* revalidate existing devices and attach new ones */ + rc = ata_eh_revalidate_and_attach(ap, &dev); + if (rc) + goto dev_fail; + + /* resume devices */ + rc = ata_eh_resume(ap, &dev); + if (rc) + goto dev_fail; + + /* configure transfer mode if the port has been reset */ + if (ehc->i.flags & ATA_EHI_DID_RESET) { + rc = ata_set_mode(ap, &dev); + if (rc) { + down_xfermask = 1; + goto dev_fail; + } + } + + /* suspend devices */ + rc = ata_eh_suspend(ap, &dev); + if (rc) + goto dev_fail; + + goto out; + + dev_fail: + switch (rc) { + case -ENODEV: + /* device missing, schedule probing */ + ehc->i.probe_mask |= (1 << dev->devno); + case -EINVAL: + ehc->tries[dev->devno] = 0; + break; + case -EIO: + sata_down_spd_limit(ap); + default: + ehc->tries[dev->devno]--; + if (down_xfermask && + ata_down_xfermask_limit(dev, ehc->tries[dev->devno] == 1)) + ehc->tries[dev->devno] = 0; + } + + if (ata_dev_enabled(dev) && !ehc->tries[dev->devno]) { + /* disable device if it has used up all its chances */ + ata_dev_disable(dev); + + /* detach if offline */ + if (ata_port_offline(ap)) + ata_eh_detach_dev(dev); + + /* probe if requested */ + if ((ehc->i.probe_mask & (1 << dev->devno)) && + !(ehc->did_probe_mask & (1 << dev->devno))) { + ata_eh_detach_dev(dev); + ata_dev_init(dev); + + ehc->tries[dev->devno] = ATA_EH_DEV_TRIES; + ehc->did_probe_mask |= (1 << dev->devno); + ehc->i.action |= ATA_EH_SOFTRESET; + } + } else { + /* soft didn't work? be haaaaard */ + if (ehc->i.flags & ATA_EHI_DID_RESET) + ehc->i.action |= ATA_EH_HARDRESET; + else + ehc->i.action |= ATA_EH_SOFTRESET; + } + + if (ata_port_nr_enabled(ap)) { + ata_port_printk(ap, KERN_WARNING, "failed to recover some " + "devices, retrying in 5 secs\n"); + ssleep(5); + } else { + /* no device left, repeat fast */ + msleep(500); + } + + goto retry; + + out: + if (rc) { + for (i = 0; i < ATA_MAX_DEVICES; i++) + ata_dev_disable(&ap->device[i]); + } + + DPRINTK("EXIT, rc=%d\n", rc); + return rc; +} + +/** + * ata_eh_finish - finish up EH + * @ap: host port to finish EH for + * + * Recovery is complete. Clean up EH states and retry or finish + * failed qcs. + * + * LOCKING: + * None. + */ +static void ata_eh_finish(struct ata_port *ap) +{ + int tag; + + /* retry or finish qcs */ + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); + + if (!(qc->flags & ATA_QCFLAG_FAILED)) + continue; + + if (qc->err_mask) { + /* FIXME: Once EH migration is complete, + * generate sense data in this function, + * considering both err_mask and tf. + */ + if (qc->err_mask & AC_ERR_INVALID) + ata_eh_qc_complete(qc); + else + ata_eh_qc_retry(qc); + } else { + if (qc->flags & ATA_QCFLAG_SENSE_VALID) { + ata_eh_qc_complete(qc); + } else { + /* feed zero TF to sense generation */ + memset(&qc->result_tf, 0, sizeof(qc->result_tf)); + ata_eh_qc_retry(qc); + } + } + } +} + +/** + * ata_do_eh - do standard error handling + * @ap: host port to handle error for + * @prereset: prereset method (can be NULL) + * @softreset: softreset method (can be NULL) + * @hardreset: hardreset method (can be NULL) + * @postreset: postreset method (can be NULL) + * + * Perform standard error handling sequence. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, + ata_reset_fn_t softreset, ata_reset_fn_t hardreset, + ata_postreset_fn_t postreset) +{ + ata_eh_autopsy(ap); + ata_eh_report(ap); + ata_eh_recover(ap, prereset, softreset, hardreset, postreset); + ata_eh_finish(ap); +} + +/** + * ata_eh_handle_port_suspend - perform port suspend operation + * @ap: port to suspend + * + * Suspend @ap. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +static void ata_eh_handle_port_suspend(struct ata_port *ap) +{ + unsigned long flags; + int rc = 0; + + /* are we suspending? */ + spin_lock_irqsave(ap->lock, flags); + if (!(ap->pflags & ATA_PFLAG_PM_PENDING) || + ap->pm_mesg.event == PM_EVENT_ON) { + spin_unlock_irqrestore(ap->lock, flags); + return; + } + spin_unlock_irqrestore(ap->lock, flags); + + WARN_ON(ap->pflags & ATA_PFLAG_SUSPENDED); + + /* suspend */ + ata_eh_freeze_port(ap); + + if (ap->ops->port_suspend) + rc = ap->ops->port_suspend(ap, ap->pm_mesg); + + /* report result */ + spin_lock_irqsave(ap->lock, flags); + + ap->pflags &= ~ATA_PFLAG_PM_PENDING; + if (rc == 0) + ap->pflags |= ATA_PFLAG_SUSPENDED; + else + ata_port_schedule_eh(ap); + + if (ap->pm_result) { + *ap->pm_result = rc; + ap->pm_result = NULL; + } + + spin_unlock_irqrestore(ap->lock, flags); + + return; +} + +/** + * ata_eh_handle_port_resume - perform port resume operation + * @ap: port to resume + * + * Resume @ap. + * + * This function also waits upto one second until all devices + * hanging off this port requests resume EH action. This is to + * prevent invoking EH and thus reset multiple times on resume. + * + * On DPM resume, where some of devices might not be resumed + * together, this may delay port resume upto one second, but such + * DPM resumes are rare and 1 sec delay isn't too bad. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +static void ata_eh_handle_port_resume(struct ata_port *ap) +{ + unsigned long timeout; + unsigned long flags; + int i, rc = 0; + + /* are we resuming? */ + spin_lock_irqsave(ap->lock, flags); + if (!(ap->pflags & ATA_PFLAG_PM_PENDING) || + ap->pm_mesg.event != PM_EVENT_ON) { + spin_unlock_irqrestore(ap->lock, flags); + return; + } + spin_unlock_irqrestore(ap->lock, flags); + + /* spurious? */ + if (!(ap->pflags & ATA_PFLAG_SUSPENDED)) + goto done; + + if (ap->ops->port_resume) + rc = ap->ops->port_resume(ap); + + /* give devices time to request EH */ + timeout = jiffies + HZ; /* 1s max */ + while (1) { + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + unsigned int action = ata_eh_dev_action(dev); + + if ((dev->flags & ATA_DFLAG_SUSPENDED) && + !(action & ATA_EH_RESUME)) + break; + } + + if (i == ATA_MAX_DEVICES || time_after(jiffies, timeout)) + break; + msleep(10); + } + + done: + spin_lock_irqsave(ap->lock, flags); + ap->pflags &= ~(ATA_PFLAG_PM_PENDING | ATA_PFLAG_SUSPENDED); + if (ap->pm_result) { + *ap->pm_result = rc; + ap->pm_result = NULL; + } + spin_unlock_irqrestore(ap->lock, flags); +} diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c new file mode 100644 index 00000000000..d168e341366 --- /dev/null +++ b/drivers/ata/libata-scsi.c @@ -0,0 +1,3322 @@ +/* + * libata-scsi.c - helper library for ATA + * + * Maintained by: Jeff Garzik + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003-2004 Red Hat, Inc. All rights reserved. + * Copyright 2003-2004 Jeff Garzik + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available from + * - http://www.t10.org/ + * - http://www.t13.org/ + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "libata.h" + +#define SECTOR_SIZE 512 + +typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd); + +static struct ata_device * __ata_scsi_find_dev(struct ata_port *ap, + const struct scsi_device *scsidev); +static struct ata_device * ata_scsi_find_dev(struct ata_port *ap, + const struct scsi_device *scsidev); +static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, + unsigned int id, unsigned int lun); + + +#define RW_RECOVERY_MPAGE 0x1 +#define RW_RECOVERY_MPAGE_LEN 12 +#define CACHE_MPAGE 0x8 +#define CACHE_MPAGE_LEN 20 +#define CONTROL_MPAGE 0xa +#define CONTROL_MPAGE_LEN 12 +#define ALL_MPAGES 0x3f +#define ALL_SUB_MPAGES 0xff + + +static const u8 def_rw_recovery_mpage[] = { + RW_RECOVERY_MPAGE, + RW_RECOVERY_MPAGE_LEN - 2, + (1 << 7) | /* AWRE, sat-r06 say it shall be 0 */ + (1 << 6), /* ARRE (auto read reallocation) */ + 0, /* read retry count */ + 0, 0, 0, 0, + 0, /* write retry count */ + 0, 0, 0 +}; + +static const u8 def_cache_mpage[CACHE_MPAGE_LEN] = { + CACHE_MPAGE, + CACHE_MPAGE_LEN - 2, + 0, /* contains WCE, needs to be 0 for logic */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, /* contains DRA, needs to be 0 for logic */ + 0, 0, 0, 0, 0, 0, 0 +}; + +static const u8 def_control_mpage[CONTROL_MPAGE_LEN] = { + CONTROL_MPAGE, + CONTROL_MPAGE_LEN - 2, + 2, /* DSENSE=0, GLTSD=1 */ + 0, /* [QAM+QERR may be 1, see 05-359r1] */ + 0, 0, 0, 0, 0xff, 0xff, + 0, 30 /* extended self test time, see 05-359r1 */ +}; + +/* + * libata transport template. libata doesn't do real transport stuff. + * It just needs the eh_timed_out hook. + */ +struct scsi_transport_template ata_scsi_transport_template = { + .eh_strategy_handler = ata_scsi_error, + .eh_timed_out = ata_scsi_timed_out, + .user_scan = ata_scsi_user_scan, +}; + + +static void ata_scsi_invalid_field(struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *)) +{ + ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + done(cmd); +} + +/** + * ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd. + * @sdev: SCSI device for which BIOS geometry is to be determined + * @bdev: block device associated with @sdev + * @capacity: capacity of SCSI device + * @geom: location to which geometry will be output + * + * Generic bios head/sector/cylinder calculator + * used by sd. Most BIOSes nowadays expect a XXX/255/16 (CHS) + * mapping. Some situations may arise where the disk is not + * bootable if this is not used. + * + * LOCKING: + * Defined by the SCSI layer. We don't really care. + * + * RETURNS: + * Zero. + */ +int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev, + sector_t capacity, int geom[]) +{ + geom[0] = 255; + geom[1] = 63; + sector_div(capacity, 255*63); + geom[2] = capacity; + + return 0; +} + +/** + * ata_cmd_ioctl - Handler for HDIO_DRIVE_CMD ioctl + * @scsidev: Device to which we are issuing command + * @arg: User provided data for issuing command + * + * LOCKING: + * Defined by the SCSI layer. We don't really care. + * + * RETURNS: + * Zero on success, negative errno on error. + */ + +int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) +{ + int rc = 0; + u8 scsi_cmd[MAX_COMMAND_SIZE]; + u8 args[4], *argbuf = NULL; + int argsize = 0; + struct scsi_sense_hdr sshdr; + enum dma_data_direction data_dir; + + if (arg == NULL) + return -EINVAL; + + if (copy_from_user(args, arg, sizeof(args))) + return -EFAULT; + + memset(scsi_cmd, 0, sizeof(scsi_cmd)); + + if (args[3]) { + argsize = SECTOR_SIZE * args[3]; + argbuf = kmalloc(argsize, GFP_KERNEL); + if (argbuf == NULL) { + rc = -ENOMEM; + goto error; + } + + scsi_cmd[1] = (4 << 1); /* PIO Data-in */ + scsi_cmd[2] = 0x0e; /* no off.line or cc, read from dev, + block count in sector count field */ + data_dir = DMA_FROM_DEVICE; + } else { + scsi_cmd[1] = (3 << 1); /* Non-data */ + /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */ + data_dir = DMA_NONE; + } + + scsi_cmd[0] = ATA_16; + + scsi_cmd[4] = args[2]; + if (args[0] == WIN_SMART) { /* hack -- ide driver does this too... */ + scsi_cmd[6] = args[3]; + scsi_cmd[8] = args[1]; + scsi_cmd[10] = 0x4f; + scsi_cmd[12] = 0xc2; + } else { + scsi_cmd[6] = args[1]; + } + scsi_cmd[14] = args[0]; + + /* Good values for timeout and retries? Values below + from scsi_ioctl_send_command() for default case... */ + if (scsi_execute_req(scsidev, scsi_cmd, data_dir, argbuf, argsize, + &sshdr, (10*HZ), 5)) { + rc = -EIO; + goto error; + } + + /* Need code to retrieve data from check condition? */ + + if ((argbuf) + && copy_to_user(arg + sizeof(args), argbuf, argsize)) + rc = -EFAULT; +error: + kfree(argbuf); + return rc; +} + +/** + * ata_task_ioctl - Handler for HDIO_DRIVE_TASK ioctl + * @scsidev: Device to which we are issuing command + * @arg: User provided data for issuing command + * + * LOCKING: + * Defined by the SCSI layer. We don't really care. + * + * RETURNS: + * Zero on success, negative errno on error. + */ +int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg) +{ + int rc = 0; + u8 scsi_cmd[MAX_COMMAND_SIZE]; + u8 args[7]; + struct scsi_sense_hdr sshdr; + + if (arg == NULL) + return -EINVAL; + + if (copy_from_user(args, arg, sizeof(args))) + return -EFAULT; + + memset(scsi_cmd, 0, sizeof(scsi_cmd)); + scsi_cmd[0] = ATA_16; + scsi_cmd[1] = (3 << 1); /* Non-data */ + /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */ + scsi_cmd[4] = args[1]; + scsi_cmd[6] = args[2]; + scsi_cmd[8] = args[3]; + scsi_cmd[10] = args[4]; + scsi_cmd[12] = args[5]; + scsi_cmd[14] = args[0]; + + /* Good values for timeout and retries? Values below + from scsi_ioctl_send_command() for default case... */ + if (scsi_execute_req(scsidev, scsi_cmd, DMA_NONE, NULL, 0, &sshdr, + (10*HZ), 5)) + rc = -EIO; + + /* Need code to retrieve data from check condition? */ + return rc; +} + +int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg) +{ + int val = -EINVAL, rc = -EINVAL; + + switch (cmd) { + case ATA_IOC_GET_IO32: + val = 0; + if (copy_to_user(arg, &val, 1)) + return -EFAULT; + return 0; + + case ATA_IOC_SET_IO32: + val = (unsigned long) arg; + if (val != 0) + return -EINVAL; + return 0; + + case HDIO_DRIVE_CMD: + if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) + return -EACCES; + return ata_cmd_ioctl(scsidev, arg); + + case HDIO_DRIVE_TASK: + if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) + return -EACCES; + return ata_task_ioctl(scsidev, arg); + + default: + rc = -ENOTTY; + break; + } + + return rc; +} + +/** + * ata_scsi_qc_new - acquire new ata_queued_cmd reference + * @dev: ATA device to which the new command is attached + * @cmd: SCSI command that originated this ATA command + * @done: SCSI command completion function + * + * Obtain a reference to an unused ata_queued_cmd structure, + * which is the basic libata structure representing a single + * ATA command sent to the hardware. + * + * If a command was available, fill in the SCSI-specific + * portions of the structure with information on the + * current command. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Command allocated, or %NULL if none available. + */ +struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev, + struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *)) +{ + struct ata_queued_cmd *qc; + + qc = ata_qc_new_init(dev); + if (qc) { + qc->scsicmd = cmd; + qc->scsidone = done; + + if (cmd->use_sg) { + qc->__sg = (struct scatterlist *) cmd->request_buffer; + qc->n_elem = cmd->use_sg; + } else { + qc->__sg = &qc->sgent; + qc->n_elem = 1; + } + } else { + cmd->result = (DID_OK << 16) | (QUEUE_FULL << 1); + done(cmd); + } + + return qc; +} + +/** + * ata_dump_status - user friendly display of error info + * @id: id of the port in question + * @tf: ptr to filled out taskfile + * + * Decode and dump the ATA error/status registers for the user so + * that they have some idea what really happened at the non + * make-believe layer. + * + * LOCKING: + * inherited from caller + */ +void ata_dump_status(unsigned id, struct ata_taskfile *tf) +{ + u8 stat = tf->command, err = tf->feature; + + printk(KERN_WARNING "ata%u: status=0x%02x { ", id, stat); + if (stat & ATA_BUSY) { + printk("Busy }\n"); /* Data is not valid in this case */ + } else { + if (stat & 0x40) printk("DriveReady "); + if (stat & 0x20) printk("DeviceFault "); + if (stat & 0x10) printk("SeekComplete "); + if (stat & 0x08) printk("DataRequest "); + if (stat & 0x04) printk("CorrectedError "); + if (stat & 0x02) printk("Index "); + if (stat & 0x01) printk("Error "); + printk("}\n"); + + if (err) { + printk(KERN_WARNING "ata%u: error=0x%02x { ", id, err); + if (err & 0x04) printk("DriveStatusError "); + if (err & 0x80) { + if (err & 0x04) printk("BadCRC "); + else printk("Sector "); + } + if (err & 0x40) printk("UncorrectableError "); + if (err & 0x10) printk("SectorIdNotFound "); + if (err & 0x02) printk("TrackZeroNotFound "); + if (err & 0x01) printk("AddrMarkNotFound "); + printk("}\n"); + } + } +} + +/** + * ata_scsi_device_suspend - suspend ATA device associated with sdev + * @sdev: the SCSI device to suspend + * @mesg: target power management message + * + * Request suspend EH action on the ATA device associated with + * @sdev and wait for the operation to complete. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t mesg) +{ + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct ata_device *dev = ata_scsi_find_dev(ap, sdev); + unsigned long flags; + unsigned int action; + int rc = 0; + + if (!dev) + goto out; + + spin_lock_irqsave(ap->lock, flags); + + /* wait for the previous resume to complete */ + while (dev->flags & ATA_DFLAG_SUSPENDED) { + spin_unlock_irqrestore(ap->lock, flags); + ata_port_wait_eh(ap); + spin_lock_irqsave(ap->lock, flags); + } + + /* if @sdev is already detached, nothing to do */ + if (sdev->sdev_state == SDEV_OFFLINE || + sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL) + goto out_unlock; + + /* request suspend */ + action = ATA_EH_SUSPEND; + if (mesg.event != PM_EVENT_SUSPEND) + action |= ATA_EH_PM_FREEZE; + ap->eh_info.dev_action[dev->devno] |= action; + ap->eh_info.flags |= ATA_EHI_QUIET; + ata_port_schedule_eh(ap); + + spin_unlock_irqrestore(ap->lock, flags); + + /* wait for EH to do the job */ + ata_port_wait_eh(ap); + + spin_lock_irqsave(ap->lock, flags); + + /* If @sdev is still attached but the associated ATA device + * isn't suspended, the operation failed. + */ + if (sdev->sdev_state != SDEV_OFFLINE && + sdev->sdev_state != SDEV_CANCEL && sdev->sdev_state != SDEV_DEL && + !(dev->flags & ATA_DFLAG_SUSPENDED)) + rc = -EIO; + + out_unlock: + spin_unlock_irqrestore(ap->lock, flags); + out: + if (rc == 0) + sdev->sdev_gendev.power.power_state = mesg; + return rc; +} + +/** + * ata_scsi_device_resume - resume ATA device associated with sdev + * @sdev: the SCSI device to resume + * + * Request resume EH action on the ATA device associated with + * @sdev and return immediately. This enables parallel + * wakeup/spinup of devices. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0. + */ +int ata_scsi_device_resume(struct scsi_device *sdev) +{ + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct ata_device *dev = ata_scsi_find_dev(ap, sdev); + struct ata_eh_info *ehi = &ap->eh_info; + unsigned long flags; + unsigned int action; + + if (!dev) + goto out; + + spin_lock_irqsave(ap->lock, flags); + + /* if @sdev is already detached, nothing to do */ + if (sdev->sdev_state == SDEV_OFFLINE || + sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL) + goto out_unlock; + + /* request resume */ + action = ATA_EH_RESUME; + if (sdev->sdev_gendev.power.power_state.event == PM_EVENT_SUSPEND) + __ata_ehi_hotplugged(ehi); + else + action |= ATA_EH_PM_FREEZE | ATA_EH_SOFTRESET; + ehi->dev_action[dev->devno] |= action; + + /* We don't want autopsy and verbose EH messages. Disable + * those if we're the only device on this link. + */ + if (ata_port_max_devices(ap) == 1) + ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET; + + ata_port_schedule_eh(ap); + + out_unlock: + spin_unlock_irqrestore(ap->lock, flags); + out: + sdev->sdev_gendev.power.power_state = PMSG_ON; + return 0; +} + +/** + * ata_to_sense_error - convert ATA error to SCSI error + * @id: ATA device number + * @drv_stat: value contained in ATA status register + * @drv_err: value contained in ATA error register + * @sk: the sense key we'll fill out + * @asc: the additional sense code we'll fill out + * @ascq: the additional sense code qualifier we'll fill out + * @verbose: be verbose + * + * Converts an ATA error into a SCSI error. Fill out pointers to + * SK, ASC, and ASCQ bytes for later use in fixed or descriptor + * format sense blocks. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, + u8 *ascq, int verbose) +{ + int i; + + /* Based on the 3ware driver translation table */ + static const unsigned char sense_table[][4] = { + /* BBD|ECC|ID|MAR */ + {0xd1, ABORTED_COMMAND, 0x00, 0x00}, // Device busy Aborted command + /* BBD|ECC|ID */ + {0xd0, ABORTED_COMMAND, 0x00, 0x00}, // Device busy Aborted command + /* ECC|MC|MARK */ + {0x61, HARDWARE_ERROR, 0x00, 0x00}, // Device fault Hardware error + /* ICRC|ABRT */ /* NB: ICRC & !ABRT is BBD */ + {0x84, ABORTED_COMMAND, 0x47, 0x00}, // Data CRC error SCSI parity error + /* MC|ID|ABRT|TRK0|MARK */ + {0x37, NOT_READY, 0x04, 0x00}, // Unit offline Not ready + /* MCR|MARK */ + {0x09, NOT_READY, 0x04, 0x00}, // Unrecovered disk error Not ready + /* Bad address mark */ + {0x01, MEDIUM_ERROR, 0x13, 0x00}, // Address mark not found Address mark not found for data field + /* TRK0 */ + {0x02, HARDWARE_ERROR, 0x00, 0x00}, // Track 0 not found Hardware error + /* Abort & !ICRC */ + {0x04, ABORTED_COMMAND, 0x00, 0x00}, // Aborted command Aborted command + /* Media change request */ + {0x08, NOT_READY, 0x04, 0x00}, // Media change request FIXME: faking offline + /* SRV */ + {0x10, ABORTED_COMMAND, 0x14, 0x00}, // ID not found Recorded entity not found + /* Media change */ + {0x08, NOT_READY, 0x04, 0x00}, // Media change FIXME: faking offline + /* ECC */ + {0x40, MEDIUM_ERROR, 0x11, 0x04}, // Uncorrectable ECC error Unrecovered read error + /* BBD - block marked bad */ + {0x80, MEDIUM_ERROR, 0x11, 0x04}, // Block marked bad Medium error, unrecovered read error + {0xFF, 0xFF, 0xFF, 0xFF}, // END mark + }; + static const unsigned char stat_table[][4] = { + /* Must be first because BUSY means no other bits valid */ + {0x80, ABORTED_COMMAND, 0x47, 0x00}, // Busy, fake parity for now + {0x20, HARDWARE_ERROR, 0x00, 0x00}, // Device fault + {0x08, ABORTED_COMMAND, 0x47, 0x00}, // Timed out in xfer, fake parity for now + {0x04, RECOVERED_ERROR, 0x11, 0x00}, // Recovered ECC error Medium error, recovered + {0xFF, 0xFF, 0xFF, 0xFF}, // END mark + }; + + /* + * Is this an error we can process/parse + */ + if (drv_stat & ATA_BUSY) { + drv_err = 0; /* Ignore the err bits, they're invalid */ + } + + if (drv_err) { + /* Look for drv_err */ + for (i = 0; sense_table[i][0] != 0xFF; i++) { + /* Look for best matches first */ + if ((sense_table[i][0] & drv_err) == + sense_table[i][0]) { + *sk = sense_table[i][1]; + *asc = sense_table[i][2]; + *ascq = sense_table[i][3]; + goto translate_done; + } + } + /* No immediate match */ + if (verbose) + printk(KERN_WARNING "ata%u: no sense translation for " + "error 0x%02x\n", id, drv_err); + } + + /* Fall back to interpreting status bits */ + for (i = 0; stat_table[i][0] != 0xFF; i++) { + if (stat_table[i][0] & drv_stat) { + *sk = stat_table[i][1]; + *asc = stat_table[i][2]; + *ascq = stat_table[i][3]; + goto translate_done; + } + } + /* No error? Undecoded? */ + if (verbose) + printk(KERN_WARNING "ata%u: no sense translation for " + "status: 0x%02x\n", id, drv_stat); + + /* We need a sensible error return here, which is tricky, and one + that won't cause people to do things like return a disk wrongly */ + *sk = ABORTED_COMMAND; + *asc = 0x00; + *ascq = 0x00; + + translate_done: + if (verbose) + printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x " + "to SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n", + id, drv_stat, drv_err, *sk, *asc, *ascq); + return; +} + +/* + * ata_gen_ata_desc_sense - Generate check condition sense block. + * @qc: Command that completed. + * + * This function is specific to the ATA descriptor format sense + * block specified for the ATA pass through commands. Regardless + * of whether the command errored or not, return a sense + * block. Copy all controller registers into the sense + * block. Clear sense key, ASC & ASCQ if there is no error. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *cmd = qc->scsicmd; + struct ata_taskfile *tf = &qc->result_tf; + unsigned char *sb = cmd->sense_buffer; + unsigned char *desc = sb + 8; + int verbose = qc->ap->ops->error_handler == NULL; + + memset(sb, 0, SCSI_SENSE_BUFFERSIZE); + + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; + + /* + * Use ata_to_sense_error() to map status register bits + * onto sense key, asc & ascq. + */ + if (qc->err_mask || + tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { + ata_to_sense_error(qc->ap->id, tf->command, tf->feature, + &sb[1], &sb[2], &sb[3], verbose); + sb[1] &= 0x0f; + } + + /* + * Sense data is current and format is descriptor. + */ + sb[0] = 0x72; + + desc[0] = 0x09; + + /* + * Set length of additional sense data. + * Since we only populate descriptor 0, the total + * length is the same (fixed) length as descriptor 0. + */ + desc[1] = sb[7] = 14; + + /* + * Copy registers into sense buffer. + */ + desc[2] = 0x00; + desc[3] = tf->feature; /* == error reg */ + desc[5] = tf->nsect; + desc[7] = tf->lbal; + desc[9] = tf->lbam; + desc[11] = tf->lbah; + desc[12] = tf->device; + desc[13] = tf->command; /* == status reg */ + + /* + * Fill in Extend bit, and the high order bytes + * if applicable. + */ + if (tf->flags & ATA_TFLAG_LBA48) { + desc[2] |= 0x01; + desc[4] = tf->hob_nsect; + desc[6] = tf->hob_lbal; + desc[8] = tf->hob_lbam; + desc[10] = tf->hob_lbah; + } +} + +/** + * ata_gen_fixed_sense - generate a SCSI fixed sense block + * @qc: Command that we are erroring out + * + * Leverage ata_to_sense_error() to give us the codes. Fit our + * LBA in here if there's room. + * + * LOCKING: + * inherited from caller + */ +void ata_gen_fixed_sense(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *cmd = qc->scsicmd; + struct ata_taskfile *tf = &qc->result_tf; + unsigned char *sb = cmd->sense_buffer; + int verbose = qc->ap->ops->error_handler == NULL; + + memset(sb, 0, SCSI_SENSE_BUFFERSIZE); + + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; + + /* + * Use ata_to_sense_error() to map status register bits + * onto sense key, asc & ascq. + */ + if (qc->err_mask || + tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { + ata_to_sense_error(qc->ap->id, tf->command, tf->feature, + &sb[2], &sb[12], &sb[13], verbose); + sb[2] &= 0x0f; + } + + sb[0] = 0x70; + sb[7] = 0x0a; + + if (tf->flags & ATA_TFLAG_LBA48) { + /* TODO: find solution for LBA48 descriptors */ + } + + else if (tf->flags & ATA_TFLAG_LBA) { + /* A small (28b) LBA will fit in the 32b info field */ + sb[0] |= 0x80; /* set valid bit */ + sb[3] = tf->device & 0x0f; + sb[4] = tf->lbah; + sb[5] = tf->lbam; + sb[6] = tf->lbal; + } + + else { + /* TODO: C/H/S */ + } +} + +static void ata_scsi_sdev_config(struct scsi_device *sdev) +{ + sdev->use_10_for_rw = 1; + sdev->use_10_for_ms = 1; +} + +static void ata_scsi_dev_config(struct scsi_device *sdev, + struct ata_device *dev) +{ + unsigned int max_sectors; + + /* TODO: 2048 is an arbitrary number, not the + * hardware maximum. This should be increased to + * 65534 when Jens Axboe's patch for dynamically + * determining max_sectors is merged. + */ + max_sectors = ATA_MAX_SECTORS; + if (dev->flags & ATA_DFLAG_LBA48) + max_sectors = ATA_MAX_SECTORS_LBA48; + if (dev->max_sectors) + max_sectors = dev->max_sectors; + + blk_queue_max_sectors(sdev->request_queue, max_sectors); + + /* + * SATA DMA transfers must be multiples of 4 byte, so + * we need to pad ATAPI transfers using an extra sg. + * Decrement max hw segments accordingly. + */ + if (dev->class == ATA_DEV_ATAPI) { + request_queue_t *q = sdev->request_queue; + blk_queue_max_hw_segments(q, q->max_hw_segments - 1); + } + + if (dev->flags & ATA_DFLAG_NCQ) { + int depth; + + depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id)); + depth = min(ATA_MAX_QUEUE - 1, depth); + scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth); + } +} + +/** + * ata_scsi_slave_config - Set SCSI device attributes + * @sdev: SCSI device to examine + * + * This is called before we actually start reading + * and writing to the device, to configure certain + * SCSI mid-layer behaviors. + * + * LOCKING: + * Defined by SCSI layer. We don't really care. + */ + +int ata_scsi_slave_config(struct scsi_device *sdev) +{ + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct ata_device *dev = __ata_scsi_find_dev(ap, sdev); + + ata_scsi_sdev_config(sdev); + + blk_queue_max_phys_segments(sdev->request_queue, LIBATA_MAX_PRD); + + if (dev) + ata_scsi_dev_config(sdev, dev); + + return 0; /* scsi layer doesn't check return value, sigh */ +} + +/** + * ata_scsi_slave_destroy - SCSI device is about to be destroyed + * @sdev: SCSI device to be destroyed + * + * @sdev is about to be destroyed for hot/warm unplugging. If + * this unplugging was initiated by libata as indicated by NULL + * dev->sdev, this function doesn't have to do anything. + * Otherwise, SCSI layer initiated warm-unplug is in progress. + * Clear dev->sdev, schedule the device for ATA detach and invoke + * EH. + * + * LOCKING: + * Defined by SCSI layer. We don't really care. + */ +void ata_scsi_slave_destroy(struct scsi_device *sdev) +{ + struct ata_port *ap = ata_shost_to_port(sdev->host); + unsigned long flags; + struct ata_device *dev; + + if (!ap->ops->error_handler) + return; + + spin_lock_irqsave(ap->lock, flags); + dev = __ata_scsi_find_dev(ap, sdev); + if (dev && dev->sdev) { + /* SCSI device already in CANCEL state, no need to offline it */ + dev->sdev = NULL; + dev->flags |= ATA_DFLAG_DETACH; + ata_port_schedule_eh(ap); + } + spin_unlock_irqrestore(ap->lock, flags); +} + +/** + * ata_scsi_change_queue_depth - SCSI callback for queue depth config + * @sdev: SCSI device to configure queue depth for + * @queue_depth: new queue depth + * + * This is libata standard hostt->change_queue_depth callback. + * SCSI will call into this callback when user tries to set queue + * depth via sysfs. + * + * LOCKING: + * SCSI layer (we don't care) + * + * RETURNS: + * Newly configured queue depth. + */ +int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth) +{ + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct ata_device *dev; + int max_depth; + + if (queue_depth < 1) + return sdev->queue_depth; + + dev = ata_scsi_find_dev(ap, sdev); + if (!dev || !ata_dev_enabled(dev)) + return sdev->queue_depth; + + max_depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id)); + max_depth = min(ATA_MAX_QUEUE - 1, max_depth); + if (queue_depth > max_depth) + queue_depth = max_depth; + + scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, queue_depth); + return queue_depth; +} + +/** + * ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command + * @qc: Storage for translated ATA taskfile + * @scsicmd: SCSI command to translate + * + * Sets up an ATA taskfile to issue STANDBY (to stop) or READ VERIFY + * (to start). Perhaps these commands should be preceded by + * CHECK POWER MODE to see what power mode the device is already in. + * [See SAT revision 5 at www.t10.org] + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Zero on success, non-zero on error. + */ + +static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, + const u8 *scsicmd) +{ + struct ata_taskfile *tf = &qc->tf; + + tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; + tf->protocol = ATA_PROT_NODATA; + if (scsicmd[1] & 0x1) { + ; /* ignore IMMED bit, violates sat-r05 */ + } + if (scsicmd[4] & 0x2) + goto invalid_fld; /* LOEJ bit set not supported */ + if (((scsicmd[4] >> 4) & 0xf) != 0) + goto invalid_fld; /* power conditions not supported */ + if (scsicmd[4] & 0x1) { + tf->nsect = 1; /* 1 sector, lba=0 */ + + if (qc->dev->flags & ATA_DFLAG_LBA) { + tf->flags |= ATA_TFLAG_LBA; + + tf->lbah = 0x0; + tf->lbam = 0x0; + tf->lbal = 0x0; + tf->device |= ATA_LBA; + } else { + /* CHS */ + tf->lbal = 0x1; /* sect */ + tf->lbam = 0x0; /* cyl low */ + tf->lbah = 0x0; /* cyl high */ + } + + tf->command = ATA_CMD_VERIFY; /* READ VERIFY */ + } else { + tf->nsect = 0; /* time period value (0 implies now) */ + tf->command = ATA_CMD_STANDBY; + /* Consider: ATA STANDBY IMMEDIATE command */ + } + /* + * Standby and Idle condition timers could be implemented but that + * would require libata to implement the Power condition mode page + * and allow the user to change it. Changing mode pages requires + * MODE SELECT to be implemented. + */ + + return 0; + +invalid_fld: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; +} + + +/** + * ata_scsi_flush_xlat - Translate SCSI SYNCHRONIZE CACHE command + * @qc: Storage for translated ATA taskfile + * @scsicmd: SCSI command to translate (ignored) + * + * Sets up an ATA taskfile to issue FLUSH CACHE or + * FLUSH CACHE EXT. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Zero on success, non-zero on error. + */ + +static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) +{ + struct ata_taskfile *tf = &qc->tf; + + tf->flags |= ATA_TFLAG_DEVICE; + tf->protocol = ATA_PROT_NODATA; + + if ((qc->dev->flags & ATA_DFLAG_LBA48) && + (ata_id_has_flush_ext(qc->dev->id))) + tf->command = ATA_CMD_FLUSH_EXT; + else + tf->command = ATA_CMD_FLUSH; + + return 0; +} + +/** + * scsi_6_lba_len - Get LBA and transfer length + * @scsicmd: SCSI command to translate + * + * Calculate LBA and transfer length for 6-byte commands. + * + * RETURNS: + * @plba: the LBA + * @plen: the transfer length + */ + +static void scsi_6_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) +{ + u64 lba = 0; + u32 len = 0; + + VPRINTK("six-byte command\n"); + + lba |= ((u64)scsicmd[2]) << 8; + lba |= ((u64)scsicmd[3]); + + len |= ((u32)scsicmd[4]); + + *plba = lba; + *plen = len; +} + +/** + * scsi_10_lba_len - Get LBA and transfer length + * @scsicmd: SCSI command to translate + * + * Calculate LBA and transfer length for 10-byte commands. + * + * RETURNS: + * @plba: the LBA + * @plen: the transfer length + */ + +static void scsi_10_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) +{ + u64 lba = 0; + u32 len = 0; + + VPRINTK("ten-byte command\n"); + + lba |= ((u64)scsicmd[2]) << 24; + lba |= ((u64)scsicmd[3]) << 16; + lba |= ((u64)scsicmd[4]) << 8; + lba |= ((u64)scsicmd[5]); + + len |= ((u32)scsicmd[7]) << 8; + len |= ((u32)scsicmd[8]); + + *plba = lba; + *plen = len; +} + +/** + * scsi_16_lba_len - Get LBA and transfer length + * @scsicmd: SCSI command to translate + * + * Calculate LBA and transfer length for 16-byte commands. + * + * RETURNS: + * @plba: the LBA + * @plen: the transfer length + */ + +static void scsi_16_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) +{ + u64 lba = 0; + u32 len = 0; + + VPRINTK("sixteen-byte command\n"); + + lba |= ((u64)scsicmd[2]) << 56; + lba |= ((u64)scsicmd[3]) << 48; + lba |= ((u64)scsicmd[4]) << 40; + lba |= ((u64)scsicmd[5]) << 32; + lba |= ((u64)scsicmd[6]) << 24; + lba |= ((u64)scsicmd[7]) << 16; + lba |= ((u64)scsicmd[8]) << 8; + lba |= ((u64)scsicmd[9]); + + len |= ((u32)scsicmd[10]) << 24; + len |= ((u32)scsicmd[11]) << 16; + len |= ((u32)scsicmd[12]) << 8; + len |= ((u32)scsicmd[13]); + + *plba = lba; + *plen = len; +} + +/** + * ata_scsi_verify_xlat - Translate SCSI VERIFY command into an ATA one + * @qc: Storage for translated ATA taskfile + * @scsicmd: SCSI command to translate + * + * Converts SCSI VERIFY command to an ATA READ VERIFY command. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Zero on success, non-zero on error. + */ + +static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) +{ + struct ata_taskfile *tf = &qc->tf; + struct ata_device *dev = qc->dev; + u64 dev_sectors = qc->dev->n_sectors; + u64 block; + u32 n_block; + + tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf->protocol = ATA_PROT_NODATA; + + if (scsicmd[0] == VERIFY) + scsi_10_lba_len(scsicmd, &block, &n_block); + else if (scsicmd[0] == VERIFY_16) + scsi_16_lba_len(scsicmd, &block, &n_block); + else + goto invalid_fld; + + if (!n_block) + goto nothing_to_do; + if (block >= dev_sectors) + goto out_of_range; + if ((block + n_block) > dev_sectors) + goto out_of_range; + + if (dev->flags & ATA_DFLAG_LBA) { + tf->flags |= ATA_TFLAG_LBA; + + if (lba_28_ok(block, n_block)) { + /* use LBA28 */ + tf->command = ATA_CMD_VERIFY; + tf->device |= (block >> 24) & 0xf; + } else if (lba_48_ok(block, n_block)) { + if (!(dev->flags & ATA_DFLAG_LBA48)) + goto out_of_range; + + /* use LBA48 */ + tf->flags |= ATA_TFLAG_LBA48; + tf->command = ATA_CMD_VERIFY_EXT; + + tf->hob_nsect = (n_block >> 8) & 0xff; + + tf->hob_lbah = (block >> 40) & 0xff; + tf->hob_lbam = (block >> 32) & 0xff; + tf->hob_lbal = (block >> 24) & 0xff; + } else + /* request too large even for LBA48 */ + goto out_of_range; + + tf->nsect = n_block & 0xff; + + tf->lbah = (block >> 16) & 0xff; + tf->lbam = (block >> 8) & 0xff; + tf->lbal = block & 0xff; + + tf->device |= ATA_LBA; + } else { + /* CHS */ + u32 sect, head, cyl, track; + + if (!lba_28_ok(block, n_block)) + goto out_of_range; + + /* Convert LBA to CHS */ + track = (u32)block / dev->sectors; + cyl = track / dev->heads; + head = track % dev->heads; + sect = (u32)block % dev->sectors + 1; + + DPRINTK("block %u track %u cyl %u head %u sect %u\n", + (u32)block, track, cyl, head, sect); + + /* Check whether the converted CHS can fit. + Cylinder: 0-65535 + Head: 0-15 + Sector: 1-255*/ + if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) + goto out_of_range; + + tf->command = ATA_CMD_VERIFY; + tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ + tf->lbal = sect; + tf->lbam = cyl; + tf->lbah = cyl >> 8; + tf->device |= head; + } + + return 0; + +invalid_fld: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; + +out_of_range: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0); + /* "Logical Block Address out of range" */ + return 1; + +nothing_to_do: + qc->scsicmd->result = SAM_STAT_GOOD; + return 1; +} + +/** + * ata_scsi_rw_xlat - Translate SCSI r/w command into an ATA one + * @qc: Storage for translated ATA taskfile + * @scsicmd: SCSI command to translate + * + * Converts any of six SCSI read/write commands into the + * ATA counterpart, including starting sector (LBA), + * sector count, and taking into account the device's LBA48 + * support. + * + * Commands %READ_6, %READ_10, %READ_16, %WRITE_6, %WRITE_10, and + * %WRITE_16 are currently supported. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Zero on success, non-zero on error. + */ + +static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) +{ + struct ata_taskfile *tf = &qc->tf; + struct ata_device *dev = qc->dev; + u64 block; + u32 n_block; + + qc->flags |= ATA_QCFLAG_IO; + tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + + if (scsicmd[0] == WRITE_10 || scsicmd[0] == WRITE_6 || + scsicmd[0] == WRITE_16) + tf->flags |= ATA_TFLAG_WRITE; + + /* Calculate the SCSI LBA, transfer length and FUA. */ + switch (scsicmd[0]) { + case READ_10: + case WRITE_10: + scsi_10_lba_len(scsicmd, &block, &n_block); + if (unlikely(scsicmd[1] & (1 << 3))) + tf->flags |= ATA_TFLAG_FUA; + break; + case READ_6: + case WRITE_6: + scsi_6_lba_len(scsicmd, &block, &n_block); + + /* for 6-byte r/w commands, transfer length 0 + * means 256 blocks of data, not 0 block. + */ + if (!n_block) + n_block = 256; + break; + case READ_16: + case WRITE_16: + scsi_16_lba_len(scsicmd, &block, &n_block); + if (unlikely(scsicmd[1] & (1 << 3))) + tf->flags |= ATA_TFLAG_FUA; + break; + default: + DPRINTK("no-byte command\n"); + goto invalid_fld; + } + + /* Check and compose ATA command */ + if (!n_block) + /* For 10-byte and 16-byte SCSI R/W commands, transfer + * length 0 means transfer 0 block of data. + * However, for ATA R/W commands, sector count 0 means + * 256 or 65536 sectors, not 0 sectors as in SCSI. + * + * WARNING: one or two older ATA drives treat 0 as 0... + */ + goto nothing_to_do; + + if ((dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ) { + /* yay, NCQ */ + if (!lba_48_ok(block, n_block)) + goto out_of_range; + + tf->protocol = ATA_PROT_NCQ; + tf->flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48; + + if (tf->flags & ATA_TFLAG_WRITE) + tf->command = ATA_CMD_FPDMA_WRITE; + else + tf->command = ATA_CMD_FPDMA_READ; + + qc->nsect = n_block; + + tf->nsect = qc->tag << 3; + tf->hob_feature = (n_block >> 8) & 0xff; + tf->feature = n_block & 0xff; + + tf->hob_lbah = (block >> 40) & 0xff; + tf->hob_lbam = (block >> 32) & 0xff; + tf->hob_lbal = (block >> 24) & 0xff; + tf->lbah = (block >> 16) & 0xff; + tf->lbam = (block >> 8) & 0xff; + tf->lbal = block & 0xff; + + tf->device = 1 << 6; + if (tf->flags & ATA_TFLAG_FUA) + tf->device |= 1 << 7; + } else if (dev->flags & ATA_DFLAG_LBA) { + tf->flags |= ATA_TFLAG_LBA; + + if (lba_28_ok(block, n_block)) { + /* use LBA28 */ + tf->device |= (block >> 24) & 0xf; + } else if (lba_48_ok(block, n_block)) { + if (!(dev->flags & ATA_DFLAG_LBA48)) + goto out_of_range; + + /* use LBA48 */ + tf->flags |= ATA_TFLAG_LBA48; + + tf->hob_nsect = (n_block >> 8) & 0xff; + + tf->hob_lbah = (block >> 40) & 0xff; + tf->hob_lbam = (block >> 32) & 0xff; + tf->hob_lbal = (block >> 24) & 0xff; + } else + /* request too large even for LBA48 */ + goto out_of_range; + + if (unlikely(ata_rwcmd_protocol(qc) < 0)) + goto invalid_fld; + + qc->nsect = n_block; + tf->nsect = n_block & 0xff; + + tf->lbah = (block >> 16) & 0xff; + tf->lbam = (block >> 8) & 0xff; + tf->lbal = block & 0xff; + + tf->device |= ATA_LBA; + } else { + /* CHS */ + u32 sect, head, cyl, track; + + /* The request -may- be too large for CHS addressing. */ + if (!lba_28_ok(block, n_block)) + goto out_of_range; + + if (unlikely(ata_rwcmd_protocol(qc) < 0)) + goto invalid_fld; + + /* Convert LBA to CHS */ + track = (u32)block / dev->sectors; + cyl = track / dev->heads; + head = track % dev->heads; + sect = (u32)block % dev->sectors + 1; + + DPRINTK("block %u track %u cyl %u head %u sect %u\n", + (u32)block, track, cyl, head, sect); + + /* Check whether the converted CHS can fit. + Cylinder: 0-65535 + Head: 0-15 + Sector: 1-255*/ + if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) + goto out_of_range; + + qc->nsect = n_block; + tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ + tf->lbal = sect; + tf->lbam = cyl; + tf->lbah = cyl >> 8; + tf->device |= head; + } + + return 0; + +invalid_fld: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; + +out_of_range: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0); + /* "Logical Block Address out of range" */ + return 1; + +nothing_to_do: + qc->scsicmd->result = SAM_STAT_GOOD; + return 1; +} + +static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *cmd = qc->scsicmd; + u8 *cdb = cmd->cmnd; + int need_sense = (qc->err_mask != 0); + + /* We snoop the SET_FEATURES - Write Cache ON/OFF command, and + * schedule EH_REVALIDATE operation to update the IDENTIFY DEVICE + * cache + */ + if (!need_sense && (qc->tf.command == ATA_CMD_SET_FEATURES) && + ((qc->tf.feature == SETFEATURES_WC_ON) || + (qc->tf.feature == SETFEATURES_WC_OFF))) { + qc->ap->eh_info.action |= ATA_EH_REVALIDATE; + ata_port_schedule_eh(qc->ap); + } + + /* For ATA pass thru (SAT) commands, generate a sense block if + * user mandated it or if there's an error. Note that if we + * generate because the user forced us to, a check condition + * is generated and the ATA register values are returned + * whether the command completed successfully or not. If there + * was no error, SK, ASC and ASCQ will all be zero. + */ + if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) && + ((cdb[2] & 0x20) || need_sense)) { + ata_gen_ata_desc_sense(qc); + } else { + if (!need_sense) { + cmd->result = SAM_STAT_GOOD; + } else { + /* TODO: decide which descriptor format to use + * for 48b LBA devices and call that here + * instead of the fixed desc, which is only + * good for smaller LBA (and maybe CHS?) + * devices. + */ + ata_gen_fixed_sense(qc); + } + } + + if (need_sense && !qc->ap->ops->error_handler) + ata_dump_status(qc->ap->id, &qc->result_tf); + + qc->scsidone(cmd); + + ata_qc_free(qc); +} + +/** + * ata_scmd_need_defer - Check whether we need to defer scmd + * @dev: ATA device to which the command is addressed + * @is_io: Is the command IO (and thus possibly NCQ)? + * + * NCQ and non-NCQ commands cannot run together. As upper layer + * only knows the queue depth, we are responsible for maintaining + * exclusion. This function checks whether a new command can be + * issued to @dev. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * 1 if deferring is needed, 0 otherwise. + */ +static int ata_scmd_need_defer(struct ata_device *dev, int is_io) +{ + struct ata_port *ap = dev->ap; + + if (!(dev->flags & ATA_DFLAG_NCQ)) + return 0; + + if (is_io) { + if (!ata_tag_valid(ap->active_tag)) + return 0; + } else { + if (!ata_tag_valid(ap->active_tag) && !ap->sactive) + return 0; + } + return 1; +} + +/** + * ata_scsi_translate - Translate then issue SCSI command to ATA device + * @dev: ATA device to which the command is addressed + * @cmd: SCSI command to execute + * @done: SCSI command completion function + * @xlat_func: Actor which translates @cmd to an ATA taskfile + * + * Our ->queuecommand() function has decided that the SCSI + * command issued can be directly translated into an ATA + * command, rather than handled internally. + * + * This function sets up an ata_queued_cmd structure for the + * SCSI command, and sends that ata_queued_cmd to the hardware. + * + * The xlat_func argument (actor) returns 0 if ready to execute + * ATA command, else 1 to finish translation. If 1 is returned + * then cmd->result (and possibly cmd->sense_buffer) are assumed + * to be set reflecting an error condition or clean (early) + * termination. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * 0 on success, SCSI_ML_QUEUE_DEVICE_BUSY if the command + * needs to be deferred. + */ +static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *), + ata_xlat_func_t xlat_func) +{ + struct ata_queued_cmd *qc; + u8 *scsicmd = cmd->cmnd; + int is_io = xlat_func == ata_scsi_rw_xlat; + + VPRINTK("ENTER\n"); + + if (unlikely(ata_scmd_need_defer(dev, is_io))) + goto defer; + + qc = ata_scsi_qc_new(dev, cmd, done); + if (!qc) + goto err_mem; + + /* data is present; dma-map it */ + if (cmd->sc_data_direction == DMA_FROM_DEVICE || + cmd->sc_data_direction == DMA_TO_DEVICE) { + if (unlikely(cmd->request_bufflen < 1)) { + ata_dev_printk(dev, KERN_WARNING, + "WARNING: zero len r/w req\n"); + goto err_did; + } + + if (cmd->use_sg) + ata_sg_init(qc, cmd->request_buffer, cmd->use_sg); + else + ata_sg_init_one(qc, cmd->request_buffer, + cmd->request_bufflen); + + qc->dma_dir = cmd->sc_data_direction; + } + + qc->complete_fn = ata_scsi_qc_complete; + + if (xlat_func(qc, scsicmd)) + goto early_finish; + + /* select device, send command to hardware */ + ata_qc_issue(qc); + + VPRINTK("EXIT\n"); + return 0; + +early_finish: + ata_qc_free(qc); + done(cmd); + DPRINTK("EXIT - early finish (good or error)\n"); + return 0; + +err_did: + ata_qc_free(qc); +err_mem: + cmd->result = (DID_ERROR << 16); + done(cmd); + DPRINTK("EXIT - internal\n"); + return 0; + +defer: + DPRINTK("EXIT - defer\n"); + return SCSI_MLQUEUE_DEVICE_BUSY; +} + +/** + * ata_scsi_rbuf_get - Map response buffer. + * @cmd: SCSI command containing buffer to be mapped. + * @buf_out: Pointer to mapped area. + * + * Maps buffer contained within SCSI command @cmd. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Length of response buffer. + */ + +static unsigned int ata_scsi_rbuf_get(struct scsi_cmnd *cmd, u8 **buf_out) +{ + u8 *buf; + unsigned int buflen; + + if (cmd->use_sg) { + struct scatterlist *sg; + + sg = (struct scatterlist *) cmd->request_buffer; + buf = kmap_atomic(sg->page, KM_USER0) + sg->offset; + buflen = sg->length; + } else { + buf = cmd->request_buffer; + buflen = cmd->request_bufflen; + } + + *buf_out = buf; + return buflen; +} + +/** + * ata_scsi_rbuf_put - Unmap response buffer. + * @cmd: SCSI command containing buffer to be unmapped. + * @buf: buffer to unmap + * + * Unmaps response buffer contained within @cmd. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +static inline void ata_scsi_rbuf_put(struct scsi_cmnd *cmd, u8 *buf) +{ + if (cmd->use_sg) { + struct scatterlist *sg; + + sg = (struct scatterlist *) cmd->request_buffer; + kunmap_atomic(buf - sg->offset, KM_USER0); + } +} + +/** + * ata_scsi_rbuf_fill - wrapper for SCSI command simulators + * @args: device IDENTIFY data / SCSI command of interest. + * @actor: Callback hook for desired SCSI command simulator + * + * Takes care of the hard work of simulating a SCSI command... + * Mapping the response buffer, calling the command's handler, + * and handling the handler's return value. This return value + * indicates whether the handler wishes the SCSI command to be + * completed successfully (0), or not (in which case cmd->result + * and sense buffer are assumed to be set). + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +void ata_scsi_rbuf_fill(struct ata_scsi_args *args, + unsigned int (*actor) (struct ata_scsi_args *args, + u8 *rbuf, unsigned int buflen)) +{ + u8 *rbuf; + unsigned int buflen, rc; + struct scsi_cmnd *cmd = args->cmd; + + buflen = ata_scsi_rbuf_get(cmd, &rbuf); + memset(rbuf, 0, buflen); + rc = actor(args, rbuf, buflen); + ata_scsi_rbuf_put(cmd, rbuf); + + if (rc == 0) + cmd->result = SAM_STAT_GOOD; + args->done(cmd); +} + +/** + * ata_scsiop_inq_std - Simulate INQUIRY command + * @args: device IDENTIFY data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * @buflen: Response buffer length. + * + * Returns standard device identification data associated + * with non-VPD INQUIRY command output. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, + unsigned int buflen) +{ + u8 hdr[] = { + TYPE_DISK, + 0, + 0x5, /* claim SPC-3 version compatibility */ + 2, + 95 - 4 + }; + + /* set scsi removeable (RMB) bit per ata bit */ + if (ata_id_removeable(args->id)) + hdr[1] |= (1 << 7); + + VPRINTK("ENTER\n"); + + memcpy(rbuf, hdr, sizeof(hdr)); + + if (buflen > 35) { + memcpy(&rbuf[8], "ATA ", 8); + ata_id_string(args->id, &rbuf[16], ATA_ID_PROD_OFS, 16); + ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV_OFS, 4); + if (rbuf[32] == 0 || rbuf[32] == ' ') + memcpy(&rbuf[32], "n/a ", 4); + } + + if (buflen > 63) { + const u8 versions[] = { + 0x60, /* SAM-3 (no version claimed) */ + + 0x03, + 0x20, /* SBC-2 (no version claimed) */ + + 0x02, + 0x60 /* SPC-3 (no version claimed) */ + }; + + memcpy(rbuf + 59, versions, sizeof(versions)); + } + + return 0; +} + +/** + * ata_scsiop_inq_00 - Simulate INQUIRY VPD page 0, list of pages + * @args: device IDENTIFY data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * @buflen: Response buffer length. + * + * Returns list of inquiry VPD pages available. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf, + unsigned int buflen) +{ + const u8 pages[] = { + 0x00, /* page 0x00, this page */ + 0x80, /* page 0x80, unit serial no page */ + 0x83 /* page 0x83, device ident page */ + }; + rbuf[3] = sizeof(pages); /* number of supported VPD pages */ + + if (buflen > 6) + memcpy(rbuf + 4, pages, sizeof(pages)); + + return 0; +} + +/** + * ata_scsiop_inq_80 - Simulate INQUIRY VPD page 80, device serial number + * @args: device IDENTIFY data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * @buflen: Response buffer length. + * + * Returns ATA device serial number. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +unsigned int ata_scsiop_inq_80(struct ata_scsi_args *args, u8 *rbuf, + unsigned int buflen) +{ + const u8 hdr[] = { + 0, + 0x80, /* this page code */ + 0, + ATA_SERNO_LEN, /* page len */ + }; + memcpy(rbuf, hdr, sizeof(hdr)); + + if (buflen > (ATA_SERNO_LEN + 4 - 1)) + ata_id_string(args->id, (unsigned char *) &rbuf[4], + ATA_ID_SERNO_OFS, ATA_SERNO_LEN); + + return 0; +} + +/** + * ata_scsiop_inq_83 - Simulate INQUIRY VPD page 83, device identity + * @args: device IDENTIFY data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * @buflen: Response buffer length. + * + * Yields two logical unit device identification designators: + * - vendor specific ASCII containing the ATA serial number + * - SAT defined "t10 vendor id based" containing ASCII vendor + * name ("ATA "), model and serial numbers. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf, + unsigned int buflen) +{ + int num; + const int sat_model_serial_desc_len = 68; + const int ata_model_byte_len = 40; + + rbuf[1] = 0x83; /* this page code */ + num = 4; + + if (buflen > (ATA_SERNO_LEN + num + 3)) { + /* piv=0, assoc=lu, code_set=ACSII, designator=vendor */ + rbuf[num + 0] = 2; + rbuf[num + 3] = ATA_SERNO_LEN; + num += 4; + ata_id_string(args->id, (unsigned char *) rbuf + num, + ATA_ID_SERNO_OFS, ATA_SERNO_LEN); + num += ATA_SERNO_LEN; + } + if (buflen > (sat_model_serial_desc_len + num + 3)) { + /* SAT defined lu model and serial numbers descriptor */ + /* piv=0, assoc=lu, code_set=ACSII, designator=t10 vendor id */ + rbuf[num + 0] = 2; + rbuf[num + 1] = 1; + rbuf[num + 3] = sat_model_serial_desc_len; + num += 4; + memcpy(rbuf + num, "ATA ", 8); + num += 8; + ata_id_string(args->id, (unsigned char *) rbuf + num, + ATA_ID_PROD_OFS, ata_model_byte_len); + num += ata_model_byte_len; + ata_id_string(args->id, (unsigned char *) rbuf + num, + ATA_ID_SERNO_OFS, ATA_SERNO_LEN); + num += ATA_SERNO_LEN; + } + rbuf[3] = num - 4; /* page len (assume less than 256 bytes) */ + return 0; +} + +/** + * ata_scsiop_noop - Command handler that simply returns success. + * @args: device IDENTIFY data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * @buflen: Response buffer length. + * + * No operation. Simply returns success to caller, to indicate + * that the caller should successfully complete this SCSI command. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +unsigned int ata_scsiop_noop(struct ata_scsi_args *args, u8 *rbuf, + unsigned int buflen) +{ + VPRINTK("ENTER\n"); + return 0; +} + +/** + * ata_msense_push - Push data onto MODE SENSE data output buffer + * @ptr_io: (input/output) Location to store more output data + * @last: End of output data buffer + * @buf: Pointer to BLOB being added to output buffer + * @buflen: Length of BLOB + * + * Store MODE SENSE data on an output buffer. + * + * LOCKING: + * None. + */ + +static void ata_msense_push(u8 **ptr_io, const u8 *last, + const u8 *buf, unsigned int buflen) +{ + u8 *ptr = *ptr_io; + + if ((ptr + buflen - 1) > last) + return; + + memcpy(ptr, buf, buflen); + + ptr += buflen; + + *ptr_io = ptr; +} + +/** + * ata_msense_caching - Simulate MODE SENSE caching info page + * @id: device IDENTIFY data + * @ptr_io: (input/output) Location to store more output data + * @last: End of output data buffer + * + * Generate a caching info page, which conditionally indicates + * write caching to the SCSI layer, depending on device + * capabilities. + * + * LOCKING: + * None. + */ + +static unsigned int ata_msense_caching(u16 *id, u8 **ptr_io, + const u8 *last) +{ + u8 page[CACHE_MPAGE_LEN]; + + memcpy(page, def_cache_mpage, sizeof(page)); + if (ata_id_wcache_enabled(id)) + page[2] |= (1 << 2); /* write cache enable */ + if (!ata_id_rahead_enabled(id)) + page[12] |= (1 << 5); /* disable read ahead */ + + ata_msense_push(ptr_io, last, page, sizeof(page)); + return sizeof(page); +} + +/** + * ata_msense_ctl_mode - Simulate MODE SENSE control mode page + * @dev: Device associated with this MODE SENSE command + * @ptr_io: (input/output) Location to store more output data + * @last: End of output data buffer + * + * Generate a generic MODE SENSE control mode page. + * + * LOCKING: + * None. + */ + +static unsigned int ata_msense_ctl_mode(u8 **ptr_io, const u8 *last) +{ + ata_msense_push(ptr_io, last, def_control_mpage, + sizeof(def_control_mpage)); + return sizeof(def_control_mpage); +} + +/** + * ata_msense_rw_recovery - Simulate MODE SENSE r/w error recovery page + * @dev: Device associated with this MODE SENSE command + * @ptr_io: (input/output) Location to store more output data + * @last: End of output data buffer + * + * Generate a generic MODE SENSE r/w error recovery page. + * + * LOCKING: + * None. + */ + +static unsigned int ata_msense_rw_recovery(u8 **ptr_io, const u8 *last) +{ + + ata_msense_push(ptr_io, last, def_rw_recovery_mpage, + sizeof(def_rw_recovery_mpage)); + return sizeof(def_rw_recovery_mpage); +} + +/* + * We can turn this into a real blacklist if it's needed, for now just + * blacklist any Maxtor BANC1G10 revision firmware + */ +static int ata_dev_supports_fua(u16 *id) +{ + unsigned char model[41], fw[9]; + + if (!libata_fua) + return 0; + if (!ata_id_has_fua(id)) + return 0; + + ata_id_c_string(id, model, ATA_ID_PROD_OFS, sizeof(model)); + ata_id_c_string(id, fw, ATA_ID_FW_REV_OFS, sizeof(fw)); + + if (strcmp(model, "Maxtor")) + return 1; + if (strcmp(fw, "BANC1G10")) + return 1; + + return 0; /* blacklisted */ +} + +/** + * ata_scsiop_mode_sense - Simulate MODE SENSE 6, 10 commands + * @args: device IDENTIFY data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * @buflen: Response buffer length. + * + * Simulate MODE SENSE commands. Assume this is invoked for direct + * access devices (e.g. disks) only. There should be no block + * descriptor for other device types. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, + unsigned int buflen) +{ + struct ata_device *dev = args->dev; + u8 *scsicmd = args->cmd->cmnd, *p, *last; + const u8 sat_blk_desc[] = { + 0, 0, 0, 0, /* number of blocks: sat unspecified */ + 0, + 0, 0x2, 0x0 /* block length: 512 bytes */ + }; + u8 pg, spg; + unsigned int ebd, page_control, six_byte, output_len, alloc_len, minlen; + u8 dpofua; + + VPRINTK("ENTER\n"); + + six_byte = (scsicmd[0] == MODE_SENSE); + ebd = !(scsicmd[1] & 0x8); /* dbd bit inverted == edb */ + /* + * LLBA bit in msense(10) ignored (compliant) + */ + + page_control = scsicmd[2] >> 6; + switch (page_control) { + case 0: /* current */ + break; /* supported */ + case 3: /* saved */ + goto saving_not_supp; + case 1: /* changeable */ + case 2: /* defaults */ + default: + goto invalid_fld; + } + + if (six_byte) { + output_len = 4 + (ebd ? 8 : 0); + alloc_len = scsicmd[4]; + } else { + output_len = 8 + (ebd ? 8 : 0); + alloc_len = (scsicmd[7] << 8) + scsicmd[8]; + } + minlen = (alloc_len < buflen) ? alloc_len : buflen; + + p = rbuf + output_len; + last = rbuf + minlen - 1; + + pg = scsicmd[2] & 0x3f; + spg = scsicmd[3]; + /* + * No mode subpages supported (yet) but asking for _all_ + * subpages may be valid + */ + if (spg && (spg != ALL_SUB_MPAGES)) + goto invalid_fld; + + switch(pg) { + case RW_RECOVERY_MPAGE: + output_len += ata_msense_rw_recovery(&p, last); + break; + + case CACHE_MPAGE: + output_len += ata_msense_caching(args->id, &p, last); + break; + + case CONTROL_MPAGE: { + output_len += ata_msense_ctl_mode(&p, last); + break; + } + + case ALL_MPAGES: + output_len += ata_msense_rw_recovery(&p, last); + output_len += ata_msense_caching(args->id, &p, last); + output_len += ata_msense_ctl_mode(&p, last); + break; + + default: /* invalid page code */ + goto invalid_fld; + } + + if (minlen < 1) + return 0; + + dpofua = 0; + if (ata_dev_supports_fua(args->id) && (dev->flags & ATA_DFLAG_LBA48) && + (!(dev->flags & ATA_DFLAG_PIO) || dev->multi_count)) + dpofua = 1 << 4; + + if (six_byte) { + output_len--; + rbuf[0] = output_len; + if (minlen > 2) + rbuf[2] |= dpofua; + if (ebd) { + if (minlen > 3) + rbuf[3] = sizeof(sat_blk_desc); + if (minlen > 11) + memcpy(rbuf + 4, sat_blk_desc, + sizeof(sat_blk_desc)); + } + } else { + output_len -= 2; + rbuf[0] = output_len >> 8; + if (minlen > 1) + rbuf[1] = output_len; + if (minlen > 3) + rbuf[3] |= dpofua; + if (ebd) { + if (minlen > 7) + rbuf[7] = sizeof(sat_blk_desc); + if (minlen > 15) + memcpy(rbuf + 8, sat_blk_desc, + sizeof(sat_blk_desc)); + } + } + return 0; + +invalid_fld: + ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; + +saving_not_supp: + ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x39, 0x0); + /* "Saving parameters not supported" */ + return 1; +} + +/** + * ata_scsiop_read_cap - Simulate READ CAPACITY[ 16] commands + * @args: device IDENTIFY data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * @buflen: Response buffer length. + * + * Simulate READ CAPACITY commands. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf, + unsigned int buflen) +{ + u64 n_sectors; + u32 tmp; + + VPRINTK("ENTER\n"); + + if (ata_id_has_lba(args->id)) { + if (ata_id_has_lba48(args->id)) + n_sectors = ata_id_u64(args->id, 100); + else + n_sectors = ata_id_u32(args->id, 60); + } else { + /* CHS default translation */ + n_sectors = args->id[1] * args->id[3] * args->id[6]; + + if (ata_id_current_chs_valid(args->id)) + /* CHS current translation */ + n_sectors = ata_id_u32(args->id, 57); + } + + n_sectors--; /* ATA TotalUserSectors - 1 */ + + if (args->cmd->cmnd[0] == READ_CAPACITY) { + if( n_sectors >= 0xffffffffULL ) + tmp = 0xffffffff ; /* Return max count on overflow */ + else + tmp = n_sectors ; + + /* sector count, 32-bit */ + rbuf[0] = tmp >> (8 * 3); + rbuf[1] = tmp >> (8 * 2); + rbuf[2] = tmp >> (8 * 1); + rbuf[3] = tmp; + + /* sector size */ + tmp = ATA_SECT_SIZE; + rbuf[6] = tmp >> 8; + rbuf[7] = tmp; + + } else { + /* sector count, 64-bit */ + tmp = n_sectors >> (8 * 4); + rbuf[2] = tmp >> (8 * 3); + rbuf[3] = tmp >> (8 * 2); + rbuf[4] = tmp >> (8 * 1); + rbuf[5] = tmp; + tmp = n_sectors; + rbuf[6] = tmp >> (8 * 3); + rbuf[7] = tmp >> (8 * 2); + rbuf[8] = tmp >> (8 * 1); + rbuf[9] = tmp; + + /* sector size */ + tmp = ATA_SECT_SIZE; + rbuf[12] = tmp >> 8; + rbuf[13] = tmp; + } + + return 0; +} + +/** + * ata_scsiop_report_luns - Simulate REPORT LUNS command + * @args: device IDENTIFY data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * @buflen: Response buffer length. + * + * Simulate REPORT LUNS command. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, + unsigned int buflen) +{ + VPRINTK("ENTER\n"); + rbuf[3] = 8; /* just one lun, LUN 0, size 8 bytes */ + + return 0; +} + +/** + * ata_scsi_set_sense - Set SCSI sense data and status + * @cmd: SCSI request to be handled + * @sk: SCSI-defined sense key + * @asc: SCSI-defined additional sense code + * @ascq: SCSI-defined additional sense code qualifier + * + * Helper function that builds a valid fixed format, current + * response code and the given sense key (sk), additional sense + * code (asc) and additional sense code qualifier (ascq) with + * a SCSI command status of %SAM_STAT_CHECK_CONDITION and + * DRIVER_SENSE set in the upper bits of scsi_cmnd::result . + * + * LOCKING: + * Not required + */ + +void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq) +{ + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; + + cmd->sense_buffer[0] = 0x70; /* fixed format, current */ + cmd->sense_buffer[2] = sk; + cmd->sense_buffer[7] = 18 - 8; /* additional sense length */ + cmd->sense_buffer[12] = asc; + cmd->sense_buffer[13] = ascq; +} + +/** + * ata_scsi_badcmd - End a SCSI request with an error + * @cmd: SCSI request to be handled + * @done: SCSI command completion function + * @asc: SCSI-defined additional sense code + * @ascq: SCSI-defined additional sense code qualifier + * + * Helper function that completes a SCSI command with + * %SAM_STAT_CHECK_CONDITION, with a sense key %ILLEGAL_REQUEST + * and the specified additional sense codes. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq) +{ + DPRINTK("ENTER\n"); + ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, asc, ascq); + + done(cmd); +} + +static void atapi_sense_complete(struct ata_queued_cmd *qc) +{ + if (qc->err_mask && ((qc->err_mask & AC_ERR_DEV) == 0)) { + /* FIXME: not quite right; we don't want the + * translation of taskfile registers into + * a sense descriptors, since that's only + * correct for ATA, not ATAPI + */ + ata_gen_ata_desc_sense(qc); + } + + qc->scsidone(qc->scsicmd); + ata_qc_free(qc); +} + +/* is it pointless to prefer PIO for "safety reasons"? */ +static inline int ata_pio_use_silly(struct ata_port *ap) +{ + return (ap->flags & ATA_FLAG_PIO_DMA); +} + +static void atapi_request_sense(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct scsi_cmnd *cmd = qc->scsicmd; + + DPRINTK("ATAPI request sense\n"); + + /* FIXME: is this needed? */ + memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer)); + + ap->ops->tf_read(ap, &qc->tf); + + /* fill these in, for the case where they are -not- overwritten */ + cmd->sense_buffer[0] = 0x70; + cmd->sense_buffer[2] = qc->tf.feature >> 4; + + ata_qc_reinit(qc); + + ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer)); + qc->dma_dir = DMA_FROM_DEVICE; + + memset(&qc->cdb, 0, qc->dev->cdb_len); + qc->cdb[0] = REQUEST_SENSE; + qc->cdb[4] = SCSI_SENSE_BUFFERSIZE; + + qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + qc->tf.command = ATA_CMD_PACKET; + + if (ata_pio_use_silly(ap)) { + qc->tf.protocol = ATA_PROT_ATAPI_DMA; + qc->tf.feature |= ATAPI_PKT_DMA; + } else { + qc->tf.protocol = ATA_PROT_ATAPI; + qc->tf.lbam = (8 * 1024) & 0xff; + qc->tf.lbah = (8 * 1024) >> 8; + } + qc->nbytes = SCSI_SENSE_BUFFERSIZE; + + qc->complete_fn = atapi_sense_complete; + + ata_qc_issue(qc); + + DPRINTK("EXIT\n"); +} + +static void atapi_qc_complete(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *cmd = qc->scsicmd; + unsigned int err_mask = qc->err_mask; + + VPRINTK("ENTER, err_mask 0x%X\n", err_mask); + + /* handle completion from new EH */ + if (unlikely(qc->ap->ops->error_handler && + (err_mask || qc->flags & ATA_QCFLAG_SENSE_VALID))) { + + if (!(qc->flags & ATA_QCFLAG_SENSE_VALID)) { + /* FIXME: not quite right; we don't want the + * translation of taskfile registers into a + * sense descriptors, since that's only + * correct for ATA, not ATAPI + */ + ata_gen_ata_desc_sense(qc); + } + + /* SCSI EH automatically locks door if sdev->locked is + * set. Sometimes door lock request continues to + * fail, for example, when no media is present. This + * creates a loop - SCSI EH issues door lock which + * fails and gets invoked again to acquire sense data + * for the failed command. + * + * If door lock fails, always clear sdev->locked to + * avoid this infinite loop. + */ + if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL) + qc->dev->sdev->locked = 0; + + qc->scsicmd->result = SAM_STAT_CHECK_CONDITION; + qc->scsidone(cmd); + ata_qc_free(qc); + return; + } + + /* successful completion or old EH failure path */ + if (unlikely(err_mask & AC_ERR_DEV)) { + cmd->result = SAM_STAT_CHECK_CONDITION; + atapi_request_sense(qc); + return; + } else if (unlikely(err_mask)) { + /* FIXME: not quite right; we don't want the + * translation of taskfile registers into + * a sense descriptors, since that's only + * correct for ATA, not ATAPI + */ + ata_gen_ata_desc_sense(qc); + } else { + u8 *scsicmd = cmd->cmnd; + + if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) { + u8 *buf = NULL; + unsigned int buflen; + + buflen = ata_scsi_rbuf_get(cmd, &buf); + + /* ATAPI devices typically report zero for their SCSI version, + * and sometimes deviate from the spec WRT response data + * format. If SCSI version is reported as zero like normal, + * then we make the following fixups: 1) Fake MMC-5 version, + * to indicate to the Linux scsi midlayer this is a modern + * device. 2) Ensure response data format / ATAPI information + * are always correct. + */ + if (buf[2] == 0) { + buf[2] = 0x5; + buf[3] = 0x32; + } + + ata_scsi_rbuf_put(cmd, buf); + } + + cmd->result = SAM_STAT_GOOD; + } + + qc->scsidone(cmd); + ata_qc_free(qc); +} +/** + * atapi_xlat - Initialize PACKET taskfile + * @qc: command structure to be initialized + * @scsicmd: SCSI CDB associated with this PACKET command + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Zero on success, non-zero on failure. + */ + +static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) +{ + struct scsi_cmnd *cmd = qc->scsicmd; + struct ata_device *dev = qc->dev; + int using_pio = (dev->flags & ATA_DFLAG_PIO); + int nodata = (cmd->sc_data_direction == DMA_NONE); + + if (!using_pio) + /* Check whether ATAPI DMA is safe */ + if (ata_check_atapi_dma(qc)) + using_pio = 1; + + memcpy(&qc->cdb, scsicmd, dev->cdb_len); + + qc->complete_fn = atapi_qc_complete; + + qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + if (cmd->sc_data_direction == DMA_TO_DEVICE) { + qc->tf.flags |= ATA_TFLAG_WRITE; + DPRINTK("direction: write\n"); + } + + qc->tf.command = ATA_CMD_PACKET; + + /* no data, or PIO data xfer */ + if (using_pio || nodata) { + if (nodata) + qc->tf.protocol = ATA_PROT_ATAPI_NODATA; + else + qc->tf.protocol = ATA_PROT_ATAPI; + qc->tf.lbam = (8 * 1024) & 0xff; + qc->tf.lbah = (8 * 1024) >> 8; + } + + /* DMA data xfer */ + else { + qc->tf.protocol = ATA_PROT_ATAPI_DMA; + qc->tf.feature |= ATAPI_PKT_DMA; + + if (atapi_dmadir && (cmd->sc_data_direction != DMA_TO_DEVICE)) + /* some SATA bridges need us to indicate data xfer direction */ + qc->tf.feature |= ATAPI_DMADIR; + } + + qc->nbytes = cmd->request_bufflen; + + return 0; +} + +static struct ata_device * ata_find_dev(struct ata_port *ap, int id) +{ + if (likely(id < ATA_MAX_DEVICES)) + return &ap->device[id]; + return NULL; +} + +static struct ata_device * __ata_scsi_find_dev(struct ata_port *ap, + const struct scsi_device *scsidev) +{ + /* skip commands not addressed to targets we simulate */ + if (unlikely(scsidev->channel || scsidev->lun)) + return NULL; + + return ata_find_dev(ap, scsidev->id); +} + +/** + * ata_scsi_dev_enabled - determine if device is enabled + * @dev: ATA device + * + * Determine if commands should be sent to the specified device. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * 0 if commands are not allowed / 1 if commands are allowed + */ + +static int ata_scsi_dev_enabled(struct ata_device *dev) +{ + if (unlikely(!ata_dev_enabled(dev))) + return 0; + + if (!atapi_enabled || (dev->ap->flags & ATA_FLAG_NO_ATAPI)) { + if (unlikely(dev->class == ATA_DEV_ATAPI)) { + ata_dev_printk(dev, KERN_WARNING, + "WARNING: ATAPI is %s, device ignored.\n", + atapi_enabled ? "not supported with this driver" : "disabled"); + return 0; + } + } + + return 1; +} + +/** + * ata_scsi_find_dev - lookup ata_device from scsi_cmnd + * @ap: ATA port to which the device is attached + * @scsidev: SCSI device from which we derive the ATA device + * + * Given various information provided in struct scsi_cmnd, + * map that onto an ATA bus, and using that mapping + * determine which ata_device is associated with the + * SCSI command to be sent. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Associated ATA device, or %NULL if not found. + */ +static struct ata_device * +ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev) +{ + struct ata_device *dev = __ata_scsi_find_dev(ap, scsidev); + + if (unlikely(!dev || !ata_scsi_dev_enabled(dev))) + return NULL; + + return dev; +} + +/* + * ata_scsi_map_proto - Map pass-thru protocol value to taskfile value. + * @byte1: Byte 1 from pass-thru CDB. + * + * RETURNS: + * ATA_PROT_UNKNOWN if mapping failed/unimplemented, protocol otherwise. + */ +static u8 +ata_scsi_map_proto(u8 byte1) +{ + switch((byte1 & 0x1e) >> 1) { + case 3: /* Non-data */ + return ATA_PROT_NODATA; + + case 6: /* DMA */ + return ATA_PROT_DMA; + + case 4: /* PIO Data-in */ + case 5: /* PIO Data-out */ + return ATA_PROT_PIO; + + case 10: /* Device Reset */ + case 0: /* Hard Reset */ + case 1: /* SRST */ + case 2: /* Bus Idle */ + case 7: /* Packet */ + case 8: /* DMA Queued */ + case 9: /* Device Diagnostic */ + case 11: /* UDMA Data-in */ + case 12: /* UDMA Data-Out */ + case 13: /* FPDMA */ + default: /* Reserved */ + break; + } + + return ATA_PROT_UNKNOWN; +} + +/** + * ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile + * @qc: command structure to be initialized + * @scsicmd: SCSI command to convert + * + * Handles either 12 or 16-byte versions of the CDB. + * + * RETURNS: + * Zero on success, non-zero on failure. + */ +static unsigned int +ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd) +{ + struct ata_taskfile *tf = &(qc->tf); + struct scsi_cmnd *cmd = qc->scsicmd; + struct ata_device *dev = qc->dev; + + if ((tf->protocol = ata_scsi_map_proto(scsicmd[1])) == ATA_PROT_UNKNOWN) + goto invalid_fld; + + /* We may not issue DMA commands if no DMA mode is set */ + if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0) + goto invalid_fld; + + if (scsicmd[1] & 0xe0) + /* PIO multi not supported yet */ + goto invalid_fld; + + /* + * 12 and 16 byte CDBs use different offsets to + * provide the various register values. + */ + if (scsicmd[0] == ATA_16) { + /* + * 16-byte CDB - may contain extended commands. + * + * If that is the case, copy the upper byte register values. + */ + if (scsicmd[1] & 0x01) { + tf->hob_feature = scsicmd[3]; + tf->hob_nsect = scsicmd[5]; + tf->hob_lbal = scsicmd[7]; + tf->hob_lbam = scsicmd[9]; + tf->hob_lbah = scsicmd[11]; + tf->flags |= ATA_TFLAG_LBA48; + } else + tf->flags &= ~ATA_TFLAG_LBA48; + + /* + * Always copy low byte, device and command registers. + */ + tf->feature = scsicmd[4]; + tf->nsect = scsicmd[6]; + tf->lbal = scsicmd[8]; + tf->lbam = scsicmd[10]; + tf->lbah = scsicmd[12]; + tf->device = scsicmd[13]; + tf->command = scsicmd[14]; + } else { + /* + * 12-byte CDB - incapable of extended commands. + */ + tf->flags &= ~ATA_TFLAG_LBA48; + + tf->feature = scsicmd[3]; + tf->nsect = scsicmd[4]; + tf->lbal = scsicmd[5]; + tf->lbam = scsicmd[6]; + tf->lbah = scsicmd[7]; + tf->device = scsicmd[8]; + tf->command = scsicmd[9]; + } + /* + * If slave is possible, enforce correct master/slave bit + */ + if (qc->ap->flags & ATA_FLAG_SLAVE_POSS) + tf->device = qc->dev->devno ? + tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1; + + /* + * Filter SET_FEATURES - XFER MODE command -- otherwise, + * SET_FEATURES - XFER MODE must be preceded/succeeded + * by an update to hardware-specific registers for each + * controller (i.e. the reason for ->set_piomode(), + * ->set_dmamode(), and ->post_set_mode() hooks). + */ + if ((tf->command == ATA_CMD_SET_FEATURES) + && (tf->feature == SETFEATURES_XFER)) + goto invalid_fld; + + /* + * Set flags so that all registers will be written, + * and pass on write indication (used for PIO/DMA + * setup.) + */ + tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE); + + if (cmd->sc_data_direction == DMA_TO_DEVICE) + tf->flags |= ATA_TFLAG_WRITE; + + /* + * Set transfer length. + * + * TODO: find out if we need to do more here to + * cover scatter/gather case. + */ + qc->nsect = cmd->request_bufflen / ATA_SECT_SIZE; + + /* request result TF */ + qc->flags |= ATA_QCFLAG_RESULT_TF; + + return 0; + + invalid_fld: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x00); + /* "Invalid field in cdb" */ + return 1; +} + +/** + * ata_get_xlat_func - check if SCSI to ATA translation is possible + * @dev: ATA device + * @cmd: SCSI command opcode to consider + * + * Look up the SCSI command given, and determine whether the + * SCSI command is to be translated or simulated. + * + * RETURNS: + * Pointer to translation function if possible, %NULL if not. + */ + +static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd) +{ + switch (cmd) { + case READ_6: + case READ_10: + case READ_16: + + case WRITE_6: + case WRITE_10: + case WRITE_16: + return ata_scsi_rw_xlat; + + case SYNCHRONIZE_CACHE: + if (ata_try_flush_cache(dev)) + return ata_scsi_flush_xlat; + break; + + case VERIFY: + case VERIFY_16: + return ata_scsi_verify_xlat; + + case ATA_12: + case ATA_16: + return ata_scsi_pass_thru; + + case START_STOP: + return ata_scsi_start_stop_xlat; + } + + return NULL; +} + +/** + * ata_scsi_dump_cdb - dump SCSI command contents to dmesg + * @ap: ATA port to which the command was being sent + * @cmd: SCSI command to dump + * + * Prints the contents of a SCSI command via printk(). + */ + +static inline void ata_scsi_dump_cdb(struct ata_port *ap, + struct scsi_cmnd *cmd) +{ +#ifdef ATA_DEBUG + struct scsi_device *scsidev = cmd->device; + u8 *scsicmd = cmd->cmnd; + + DPRINTK("CDB (%u:%d,%d,%d) %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", + ap->id, + scsidev->channel, scsidev->id, scsidev->lun, + scsicmd[0], scsicmd[1], scsicmd[2], scsicmd[3], + scsicmd[4], scsicmd[5], scsicmd[6], scsicmd[7], + scsicmd[8]); +#endif +} + +static inline int __ata_scsi_queuecmd(struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *), + struct ata_device *dev) +{ + int rc = 0; + + if (dev->class == ATA_DEV_ATA) { + ata_xlat_func_t xlat_func = ata_get_xlat_func(dev, + cmd->cmnd[0]); + + if (xlat_func) + rc = ata_scsi_translate(dev, cmd, done, xlat_func); + else + ata_scsi_simulate(dev, cmd, done); + } else + rc = ata_scsi_translate(dev, cmd, done, atapi_xlat); + + return rc; +} + +/** + * ata_scsi_queuecmd - Issue SCSI cdb to libata-managed device + * @cmd: SCSI command to be sent + * @done: Completion function, called when command is complete + * + * In some cases, this function translates SCSI commands into + * ATA taskfiles, and queues the taskfiles to be sent to + * hardware. In other cases, this function simulates a + * SCSI device by evaluating and responding to certain + * SCSI commands. This creates the overall effect of + * ATA and ATAPI devices appearing as SCSI devices. + * + * LOCKING: + * Releases scsi-layer-held lock, and obtains host_set lock. + * + * RETURNS: + * Return value from __ata_scsi_queuecmd() if @cmd can be queued, + * 0 otherwise. + */ +int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) +{ + struct ata_port *ap; + struct ata_device *dev; + struct scsi_device *scsidev = cmd->device; + struct Scsi_Host *shost = scsidev->host; + int rc = 0; + + ap = ata_shost_to_port(shost); + + spin_unlock(shost->host_lock); + spin_lock(ap->lock); + + ata_scsi_dump_cdb(ap, cmd); + + dev = ata_scsi_find_dev(ap, scsidev); + if (likely(dev)) + rc = __ata_scsi_queuecmd(cmd, done, dev); + else { + cmd->result = (DID_BAD_TARGET << 16); + done(cmd); + } + + spin_unlock(ap->lock); + spin_lock(shost->host_lock); + return rc; +} + +/** + * ata_scsi_simulate - simulate SCSI command on ATA device + * @dev: the target device + * @cmd: SCSI command being sent to device. + * @done: SCSI command completion function. + * + * Interprets and directly executes a select list of SCSI commands + * that can be handled internally. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *)) +{ + struct ata_scsi_args args; + const u8 *scsicmd = cmd->cmnd; + + args.dev = dev; + args.id = dev->id; + args.cmd = cmd; + args.done = done; + + switch(scsicmd[0]) { + /* no-op's, complete with success */ + case SYNCHRONIZE_CACHE: + case REZERO_UNIT: + case SEEK_6: + case SEEK_10: + case TEST_UNIT_READY: + case FORMAT_UNIT: /* FIXME: correct? */ + case SEND_DIAGNOSTIC: /* FIXME: correct? */ + ata_scsi_rbuf_fill(&args, ata_scsiop_noop); + break; + + case INQUIRY: + if (scsicmd[1] & 2) /* is CmdDt set? */ + ata_scsi_invalid_field(cmd, done); + else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */ + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std); + else if (scsicmd[2] == 0x00) + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_00); + else if (scsicmd[2] == 0x80) + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_80); + else if (scsicmd[2] == 0x83) + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_83); + else + ata_scsi_invalid_field(cmd, done); + break; + + case MODE_SENSE: + case MODE_SENSE_10: + ata_scsi_rbuf_fill(&args, ata_scsiop_mode_sense); + break; + + case MODE_SELECT: /* unconditionally return */ + case MODE_SELECT_10: /* bad-field-in-cdb */ + ata_scsi_invalid_field(cmd, done); + break; + + case READ_CAPACITY: + ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); + break; + + case SERVICE_ACTION_IN: + if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16) + ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); + else + ata_scsi_invalid_field(cmd, done); + break; + + case REPORT_LUNS: + ata_scsi_rbuf_fill(&args, ata_scsiop_report_luns); + break; + + /* mandatory commands we haven't implemented yet */ + case REQUEST_SENSE: + + /* all other commands */ + default: + ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x20, 0x0); + /* "Invalid command operation code" */ + done(cmd); + break; + } +} + +void ata_scsi_scan_host(struct ata_port *ap) +{ + unsigned int i; + + if (ap->flags & ATA_FLAG_DISABLED) + return; + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + struct scsi_device *sdev; + + if (!ata_dev_enabled(dev) || dev->sdev) + continue; + + sdev = __scsi_add_device(ap->host, 0, i, 0, NULL); + if (!IS_ERR(sdev)) { + dev->sdev = sdev; + scsi_device_put(sdev); + } + } +} + +/** + * ata_scsi_offline_dev - offline attached SCSI device + * @dev: ATA device to offline attached SCSI device for + * + * This function is called from ata_eh_hotplug() and responsible + * for taking the SCSI device attached to @dev offline. This + * function is called with host_set lock which protects dev->sdev + * against clearing. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * 1 if attached SCSI device exists, 0 otherwise. + */ +int ata_scsi_offline_dev(struct ata_device *dev) +{ + if (dev->sdev) { + scsi_device_set_state(dev->sdev, SDEV_OFFLINE); + return 1; + } + return 0; +} + +/** + * ata_scsi_remove_dev - remove attached SCSI device + * @dev: ATA device to remove attached SCSI device for + * + * This function is called from ata_eh_scsi_hotplug() and + * responsible for removing the SCSI device attached to @dev. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +static void ata_scsi_remove_dev(struct ata_device *dev) +{ + struct ata_port *ap = dev->ap; + struct scsi_device *sdev; + unsigned long flags; + + /* Alas, we need to grab scan_mutex to ensure SCSI device + * state doesn't change underneath us and thus + * scsi_device_get() always succeeds. The mutex locking can + * be removed if there is __scsi_device_get() interface which + * increments reference counts regardless of device state. + */ + mutex_lock(&ap->host->scan_mutex); + spin_lock_irqsave(ap->lock, flags); + + /* clearing dev->sdev is protected by host_set lock */ + sdev = dev->sdev; + dev->sdev = NULL; + + if (sdev) { + /* If user initiated unplug races with us, sdev can go + * away underneath us after the host_set lock and + * scan_mutex are released. Hold onto it. + */ + if (scsi_device_get(sdev) == 0) { + /* The following ensures the attached sdev is + * offline on return from ata_scsi_offline_dev() + * regardless it wins or loses the race + * against this function. + */ + scsi_device_set_state(sdev, SDEV_OFFLINE); + } else { + WARN_ON(1); + sdev = NULL; + } + } + + spin_unlock_irqrestore(ap->lock, flags); + mutex_unlock(&ap->host->scan_mutex); + + if (sdev) { + ata_dev_printk(dev, KERN_INFO, "detaching (SCSI %s)\n", + sdev->sdev_gendev.bus_id); + + scsi_remove_device(sdev); + scsi_device_put(sdev); + } +} + +/** + * ata_scsi_hotplug - SCSI part of hotplug + * @data: Pointer to ATA port to perform SCSI hotplug on + * + * Perform SCSI part of hotplug. It's executed from a separate + * workqueue after EH completes. This is necessary because SCSI + * hot plugging requires working EH and hot unplugging is + * synchronized with hot plugging with a mutex. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_scsi_hotplug(void *data) +{ + struct ata_port *ap = data; + int i; + + if (ap->pflags & ATA_PFLAG_UNLOADING) { + DPRINTK("ENTER/EXIT - unloading\n"); + return; + } + + DPRINTK("ENTER\n"); + + /* unplug detached devices */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + unsigned long flags; + + if (!(dev->flags & ATA_DFLAG_DETACHED)) + continue; + + spin_lock_irqsave(ap->lock, flags); + dev->flags &= ~ATA_DFLAG_DETACHED; + spin_unlock_irqrestore(ap->lock, flags); + + ata_scsi_remove_dev(dev); + } + + /* scan for new ones */ + ata_scsi_scan_host(ap); + + /* If we scanned while EH was in progress, scan would have + * failed silently. Requeue if there are enabled but + * unattached devices. + */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + if (ata_dev_enabled(dev) && !dev->sdev) { + queue_delayed_work(ata_aux_wq, &ap->hotplug_task, HZ); + break; + } + } + + DPRINTK("EXIT\n"); +} + +/** + * ata_scsi_user_scan - indication for user-initiated bus scan + * @shost: SCSI host to scan + * @channel: Channel to scan + * @id: ID to scan + * @lun: LUN to scan + * + * This function is called when user explicitly requests bus + * scan. Set probe pending flag and invoke EH. + * + * LOCKING: + * SCSI layer (we don't care) + * + * RETURNS: + * Zero. + */ +static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, + unsigned int id, unsigned int lun) +{ + struct ata_port *ap = ata_shost_to_port(shost); + unsigned long flags; + int rc = 0; + + if (!ap->ops->error_handler) + return -EOPNOTSUPP; + + if ((channel != SCAN_WILD_CARD && channel != 0) || + (lun != SCAN_WILD_CARD && lun != 0)) + return -EINVAL; + + spin_lock_irqsave(ap->lock, flags); + + if (id == SCAN_WILD_CARD) { + ap->eh_info.probe_mask |= (1 << ATA_MAX_DEVICES) - 1; + ap->eh_info.action |= ATA_EH_SOFTRESET; + } else { + struct ata_device *dev = ata_find_dev(ap, id); + + if (dev) { + ap->eh_info.probe_mask |= 1 << dev->devno; + ap->eh_info.action |= ATA_EH_SOFTRESET; + ap->eh_info.flags |= ATA_EHI_RESUME_LINK; + } else + rc = -EINVAL; + } + + if (rc == 0) + ata_port_schedule_eh(ap); + + spin_unlock_irqrestore(ap->lock, flags); + + return rc; +} + +/** + * ata_scsi_dev_rescan - initiate scsi_rescan_device() + * @data: Pointer to ATA port to perform scsi_rescan_device() + * + * After ATA pass thru (SAT) commands are executed successfully, + * libata need to propagate the changes to SCSI layer. This + * function must be executed from ata_aux_wq such that sdev + * attach/detach don't race with rescan. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_scsi_dev_rescan(void *data) +{ + struct ata_port *ap = data; + struct ata_device *dev; + unsigned int i; + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + + if (ata_dev_enabled(dev) && dev->sdev) + scsi_rescan_device(&(dev->sdev->sdev_gendev)); + } +} + +/** + * ata_sas_port_alloc - Allocate port for a SAS attached SATA device + * @pdev: PCI device that the scsi device is attached to + * @port_info: Information from low-level host driver + * @host: SCSI host that the scsi device is attached to + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * ata_port pointer on success / NULL on failure. + */ + +struct ata_port *ata_sas_port_alloc(struct ata_host_set *host_set, + struct ata_port_info *port_info, + struct Scsi_Host *host) +{ + struct ata_port *ap = kzalloc(sizeof(*ap), GFP_KERNEL); + struct ata_probe_ent *ent; + + if (!ap) + return NULL; + + ent = ata_probe_ent_alloc(host_set->dev, port_info); + if (!ent) { + kfree(ap); + return NULL; + } + + ata_port_init(ap, host_set, ent, 0); + ap->lock = host->host_lock; + kfree(ent); + return ap; +} +EXPORT_SYMBOL_GPL(ata_sas_port_alloc); + +/** + * ata_sas_port_start - Set port up for dma. + * @ap: Port to initialize + * + * Called just after data structures for each port are + * initialized. Allocates DMA pad. + * + * May be used as the port_start() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +int ata_sas_port_start(struct ata_port *ap) +{ + return ata_pad_alloc(ap, ap->dev); +} +EXPORT_SYMBOL_GPL(ata_sas_port_start); + +/** + * ata_port_stop - Undo ata_sas_port_start() + * @ap: Port to shut down + * + * Frees the DMA pad. + * + * May be used as the port_stop() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ + +void ata_sas_port_stop(struct ata_port *ap) +{ + ata_pad_free(ap, ap->dev); +} +EXPORT_SYMBOL_GPL(ata_sas_port_stop); + +/** + * ata_sas_port_init - Initialize a SATA device + * @ap: SATA port to initialize + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * Zero on success, non-zero on error. + */ + +int ata_sas_port_init(struct ata_port *ap) +{ + int rc = ap->ops->port_start(ap); + + if (!rc) + rc = ata_bus_probe(ap); + + return rc; +} +EXPORT_SYMBOL_GPL(ata_sas_port_init); + +/** + * ata_sas_port_destroy - Destroy a SATA port allocated by ata_sas_port_alloc + * @ap: SATA port to destroy + * + */ + +void ata_sas_port_destroy(struct ata_port *ap) +{ + ap->ops->port_stop(ap); + kfree(ap); +} +EXPORT_SYMBOL_GPL(ata_sas_port_destroy); + +/** + * ata_sas_slave_configure - Default slave_config routine for libata devices + * @sdev: SCSI device to configure + * @ap: ATA port to which SCSI device is attached + * + * RETURNS: + * Zero. + */ + +int ata_sas_slave_configure(struct scsi_device *sdev, struct ata_port *ap) +{ + ata_scsi_sdev_config(sdev); + ata_scsi_dev_config(sdev, ap->device); + return 0; +} +EXPORT_SYMBOL_GPL(ata_sas_slave_configure); + +/** + * ata_sas_queuecmd - Issue SCSI cdb to libata-managed device + * @cmd: SCSI command to be sent + * @done: Completion function, called when command is complete + * @ap: ATA port to which the command is being sent + * + * RETURNS: + * Zero. + */ + +int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), + struct ata_port *ap) +{ + ata_scsi_dump_cdb(ap, cmd); + + if (likely(ata_scsi_dev_enabled(ap->device))) + __ata_scsi_queuecmd(cmd, done, ap->device); + else { + cmd->result = (DID_BAD_TARGET << 16); + done(cmd); + } + return 0; +} +EXPORT_SYMBOL_GPL(ata_sas_queuecmd); diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h new file mode 100644 index 00000000000..d4a4f82360e --- /dev/null +++ b/drivers/ata/libata.h @@ -0,0 +1,122 @@ +/* + * libata.h - helper library for ATA + * + * Copyright 2003-2004 Red Hat, Inc. All rights reserved. + * Copyright 2003-2004 Jeff Garzik + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + */ + +#ifndef __LIBATA_H__ +#define __LIBATA_H__ + +#define DRV_NAME "libata" +#define DRV_VERSION "2.00" /* must be exactly four chars */ + +struct ata_scsi_args { + struct ata_device *dev; + u16 *id; + struct scsi_cmnd *cmd; + void (*done)(struct scsi_cmnd *); +}; + +/* libata-core.c */ +extern struct workqueue_struct *ata_aux_wq; +extern int atapi_enabled; +extern int atapi_dmadir; +extern int libata_fua; +extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev); +extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc); +extern void ata_dev_disable(struct ata_device *dev); +extern void ata_port_flush_task(struct ata_port *ap); +extern unsigned ata_exec_internal(struct ata_device *dev, + struct ata_taskfile *tf, const u8 *cdb, + int dma_dir, void *buf, unsigned int buflen); +extern unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd); +extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, + int post_reset, u16 *id); +extern int ata_dev_configure(struct ata_device *dev, int print_info); +extern int sata_down_spd_limit(struct ata_port *ap); +extern int sata_set_spd_needed(struct ata_port *ap); +extern int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0); +extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev); +extern void ata_qc_free(struct ata_queued_cmd *qc); +extern void ata_qc_issue(struct ata_queued_cmd *qc); +extern void __ata_qc_complete(struct ata_queued_cmd *qc); +extern int ata_check_atapi_dma(struct ata_queued_cmd *qc); +extern void ata_dev_select(struct ata_port *ap, unsigned int device, + unsigned int wait, unsigned int can_sleep); +extern void swap_buf_le16(u16 *buf, unsigned int buf_words); +extern int ata_flush_cache(struct ata_device *dev); +extern void ata_dev_init(struct ata_device *dev); +extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg); +extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg); +extern void ata_port_init(struct ata_port *ap, struct ata_host_set *host_set, + const struct ata_probe_ent *ent, unsigned int port_no); +extern struct ata_probe_ent *ata_probe_ent_alloc(struct device *dev, + const struct ata_port_info *port); + + +/* libata-scsi.c */ +extern struct scsi_transport_template ata_scsi_transport_template; + +extern void ata_scsi_scan_host(struct ata_port *ap); +extern int ata_scsi_offline_dev(struct ata_device *dev); +extern void ata_scsi_hotplug(void *data); +extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, + unsigned int buflen); + +extern unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf, + unsigned int buflen); + +extern unsigned int ata_scsiop_inq_80(struct ata_scsi_args *args, u8 *rbuf, + unsigned int buflen); +extern unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf, + unsigned int buflen); +extern unsigned int ata_scsiop_noop(struct ata_scsi_args *args, u8 *rbuf, + unsigned int buflen); +extern unsigned int ata_scsiop_sync_cache(struct ata_scsi_args *args, u8 *rbuf, + unsigned int buflen); +extern unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, + unsigned int buflen); +extern unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf, + unsigned int buflen); +extern unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, + unsigned int buflen); +extern void ata_scsi_badcmd(struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *), + u8 asc, u8 ascq); +extern void ata_scsi_set_sense(struct scsi_cmnd *cmd, + u8 sk, u8 asc, u8 ascq); +extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args, + unsigned int (*actor) (struct ata_scsi_args *args, + u8 *rbuf, unsigned int buflen)); +extern void ata_schedule_scsi_eh(struct Scsi_Host *shost); +extern void ata_scsi_dev_rescan(void *data); +extern int ata_bus_probe(struct ata_port *ap); + +/* libata-eh.c */ +extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd); +extern void ata_scsi_error(struct Scsi_Host *host); +extern void ata_port_wait_eh(struct ata_port *ap); +extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc); + +#endif /* __LIBATA_H__ */ diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c new file mode 100644 index 00000000000..61d2aa697b4 --- /dev/null +++ b/drivers/ata/pdc_adma.c @@ -0,0 +1,740 @@ +/* + * pdc_adma.c - Pacific Digital Corporation ADMA + * + * Maintained by: Mark Lord + * + * Copyright 2005 Mark Lord + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * + * Supports ATA disks in single-packet ADMA mode. + * Uses PIO for everything else. + * + * TODO: Use ADMA transfers for ATAPI devices, when possible. + * This requires careful attention to a number of quirks of the chip. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pdc_adma" +#define DRV_VERSION "0.04" + +/* macro to calculate base address for ATA regs */ +#define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40)) + +/* macro to calculate base address for ADMA regs */ +#define ADMA_REGS(base,port_no) ((base) + 0x80 + ((port_no) * 0x20)) + +enum { + ADMA_PORTS = 2, + ADMA_CPB_BYTES = 40, + ADMA_PRD_BYTES = LIBATA_MAX_PRD * 16, + ADMA_PKT_BYTES = ADMA_CPB_BYTES + ADMA_PRD_BYTES, + + ADMA_DMA_BOUNDARY = 0xffffffff, + + /* global register offsets */ + ADMA_MODE_LOCK = 0x00c7, + + /* per-channel register offsets */ + ADMA_CONTROL = 0x0000, /* ADMA control */ + ADMA_STATUS = 0x0002, /* ADMA status */ + ADMA_CPB_COUNT = 0x0004, /* CPB count */ + ADMA_CPB_CURRENT = 0x000c, /* current CPB address */ + ADMA_CPB_NEXT = 0x000c, /* next CPB address */ + ADMA_CPB_LOOKUP = 0x0010, /* CPB lookup table */ + ADMA_FIFO_IN = 0x0014, /* input FIFO threshold */ + ADMA_FIFO_OUT = 0x0016, /* output FIFO threshold */ + + /* ADMA_CONTROL register bits */ + aNIEN = (1 << 8), /* irq mask: 1==masked */ + aGO = (1 << 7), /* packet trigger ("Go!") */ + aRSTADM = (1 << 5), /* ADMA logic reset */ + aPIOMD4 = 0x0003, /* PIO mode 4 */ + + /* ADMA_STATUS register bits */ + aPSD = (1 << 6), + aUIRQ = (1 << 4), + aPERR = (1 << 0), + + /* CPB bits */ + cDONE = (1 << 0), + cVLD = (1 << 0), + cDAT = (1 << 2), + cIEN = (1 << 3), + + /* PRD bits */ + pORD = (1 << 4), + pDIRO = (1 << 5), + pEND = (1 << 7), + + /* ATA register flags */ + rIGN = (1 << 5), + rEND = (1 << 7), + + /* ATA register addresses */ + ADMA_REGS_CONTROL = 0x0e, + ADMA_REGS_SECTOR_COUNT = 0x12, + ADMA_REGS_LBA_LOW = 0x13, + ADMA_REGS_LBA_MID = 0x14, + ADMA_REGS_LBA_HIGH = 0x15, + ADMA_REGS_DEVICE = 0x16, + ADMA_REGS_COMMAND = 0x17, + + /* PCI device IDs */ + board_1841_idx = 0, /* ADMA 2-port controller */ +}; + +typedef enum { adma_state_idle, adma_state_pkt, adma_state_mmio } adma_state_t; + +struct adma_port_priv { + u8 *pkt; + dma_addr_t pkt_dma; + adma_state_t state; +}; + +static int adma_ata_init_one (struct pci_dev *pdev, + const struct pci_device_id *ent); +static irqreturn_t adma_intr (int irq, void *dev_instance, + struct pt_regs *regs); +static int adma_port_start(struct ata_port *ap); +static void adma_host_stop(struct ata_host_set *host_set); +static void adma_port_stop(struct ata_port *ap); +static void adma_phy_reset(struct ata_port *ap); +static void adma_qc_prep(struct ata_queued_cmd *qc); +static unsigned int adma_qc_issue(struct ata_queued_cmd *qc); +static int adma_check_atapi_dma(struct ata_queued_cmd *qc); +static void adma_bmdma_stop(struct ata_queued_cmd *qc); +static u8 adma_bmdma_status(struct ata_port *ap); +static void adma_irq_clear(struct ata_port *ap); +static void adma_eng_timeout(struct ata_port *ap); + +static struct scsi_host_template adma_ata_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ENABLE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ADMA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations adma_ata_ops = { + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .check_atapi_dma = adma_check_atapi_dma, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + .phy_reset = adma_phy_reset, + .qc_prep = adma_qc_prep, + .qc_issue = adma_qc_issue, + .eng_timeout = adma_eng_timeout, + .data_xfer = ata_mmio_data_xfer, + .irq_handler = adma_intr, + .irq_clear = adma_irq_clear, + .port_start = adma_port_start, + .port_stop = adma_port_stop, + .host_stop = adma_host_stop, + .bmdma_stop = adma_bmdma_stop, + .bmdma_status = adma_bmdma_status, +}; + +static struct ata_port_info adma_port_info[] = { + /* board_1841_idx */ + { + .sht = &adma_ata_sht, + .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | + ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | + ATA_FLAG_PIO_POLLING, + .pio_mask = 0x10, /* pio4 */ + .udma_mask = 0x1f, /* udma0-4 */ + .port_ops = &adma_ata_ops, + }, +}; + +static const struct pci_device_id adma_ata_pci_tbl[] = { + { PCI_VENDOR_ID_PDC, 0x1841, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_1841_idx }, + + { } /* terminate list */ +}; + +static struct pci_driver adma_ata_pci_driver = { + .name = DRV_NAME, + .id_table = adma_ata_pci_tbl, + .probe = adma_ata_init_one, + .remove = ata_pci_remove_one, +}; + +static int adma_check_atapi_dma(struct ata_queued_cmd *qc) +{ + return 1; /* ATAPI DMA not yet supported */ +} + +static void adma_bmdma_stop(struct ata_queued_cmd *qc) +{ + /* nothing */ +} + +static u8 adma_bmdma_status(struct ata_port *ap) +{ + return 0; +} + +static void adma_irq_clear(struct ata_port *ap) +{ + /* nothing */ +} + +static void adma_reset_engine(void __iomem *chan) +{ + /* reset ADMA to idle state */ + writew(aPIOMD4 | aNIEN | aRSTADM, chan + ADMA_CONTROL); + udelay(2); + writew(aPIOMD4, chan + ADMA_CONTROL); + udelay(2); +} + +static void adma_reinit_engine(struct ata_port *ap) +{ + struct adma_port_priv *pp = ap->private_data; + void __iomem *mmio_base = ap->host_set->mmio_base; + void __iomem *chan = ADMA_REGS(mmio_base, ap->port_no); + + /* mask/clear ATA interrupts */ + writeb(ATA_NIEN, (void __iomem *)ap->ioaddr.ctl_addr); + ata_check_status(ap); + + /* reset the ADMA engine */ + adma_reset_engine(chan); + + /* set in-FIFO threshold to 0x100 */ + writew(0x100, chan + ADMA_FIFO_IN); + + /* set CPB pointer */ + writel((u32)pp->pkt_dma, chan + ADMA_CPB_NEXT); + + /* set out-FIFO threshold to 0x100 */ + writew(0x100, chan + ADMA_FIFO_OUT); + + /* set CPB count */ + writew(1, chan + ADMA_CPB_COUNT); + + /* read/discard ADMA status */ + readb(chan + ADMA_STATUS); +} + +static inline void adma_enter_reg_mode(struct ata_port *ap) +{ + void __iomem *chan = ADMA_REGS(ap->host_set->mmio_base, ap->port_no); + + writew(aPIOMD4, chan + ADMA_CONTROL); + readb(chan + ADMA_STATUS); /* flush */ +} + +static void adma_phy_reset(struct ata_port *ap) +{ + struct adma_port_priv *pp = ap->private_data; + + pp->state = adma_state_idle; + adma_reinit_engine(ap); + ata_port_probe(ap); + ata_bus_reset(ap); +} + +static void adma_eng_timeout(struct ata_port *ap) +{ + struct adma_port_priv *pp = ap->private_data; + + if (pp->state != adma_state_idle) /* healthy paranoia */ + pp->state = adma_state_mmio; + adma_reinit_engine(ap); + ata_eng_timeout(ap); +} + +static int adma_fill_sg(struct ata_queued_cmd *qc) +{ + struct scatterlist *sg; + struct ata_port *ap = qc->ap; + struct adma_port_priv *pp = ap->private_data; + u8 *buf = pp->pkt; + int i = (2 + buf[3]) * 8; + u8 pFLAGS = pORD | ((qc->tf.flags & ATA_TFLAG_WRITE) ? pDIRO : 0); + + ata_for_each_sg(sg, qc) { + u32 addr; + u32 len; + + addr = (u32)sg_dma_address(sg); + *(__le32 *)(buf + i) = cpu_to_le32(addr); + i += 4; + + len = sg_dma_len(sg) >> 3; + *(__le32 *)(buf + i) = cpu_to_le32(len); + i += 4; + + if (ata_sg_is_last(sg, qc)) + pFLAGS |= pEND; + buf[i++] = pFLAGS; + buf[i++] = qc->dev->dma_mode & 0xf; + buf[i++] = 0; /* pPKLW */ + buf[i++] = 0; /* reserved */ + + *(__le32 *)(buf + i) + = (pFLAGS & pEND) ? 0 : cpu_to_le32(pp->pkt_dma + i + 4); + i += 4; + + VPRINTK("PRD[%u] = (0x%lX, 0x%X)\n", i/4, + (unsigned long)addr, len); + } + return i; +} + +static void adma_qc_prep(struct ata_queued_cmd *qc) +{ + struct adma_port_priv *pp = qc->ap->private_data; + u8 *buf = pp->pkt; + u32 pkt_dma = (u32)pp->pkt_dma; + int i = 0; + + VPRINTK("ENTER\n"); + + adma_enter_reg_mode(qc->ap); + if (qc->tf.protocol != ATA_PROT_DMA) { + ata_qc_prep(qc); + return; + } + + buf[i++] = 0; /* Response flags */ + buf[i++] = 0; /* reserved */ + buf[i++] = cVLD | cDAT | cIEN; + i++; /* cLEN, gets filled in below */ + + *(__le32 *)(buf+i) = cpu_to_le32(pkt_dma); /* cNCPB */ + i += 4; /* cNCPB */ + i += 4; /* cPRD, gets filled in below */ + + buf[i++] = 0; /* reserved */ + buf[i++] = 0; /* reserved */ + buf[i++] = 0; /* reserved */ + buf[i++] = 0; /* reserved */ + + /* ATA registers; must be a multiple of 4 */ + buf[i++] = qc->tf.device; + buf[i++] = ADMA_REGS_DEVICE; + if ((qc->tf.flags & ATA_TFLAG_LBA48)) { + buf[i++] = qc->tf.hob_nsect; + buf[i++] = ADMA_REGS_SECTOR_COUNT; + buf[i++] = qc->tf.hob_lbal; + buf[i++] = ADMA_REGS_LBA_LOW; + buf[i++] = qc->tf.hob_lbam; + buf[i++] = ADMA_REGS_LBA_MID; + buf[i++] = qc->tf.hob_lbah; + buf[i++] = ADMA_REGS_LBA_HIGH; + } + buf[i++] = qc->tf.nsect; + buf[i++] = ADMA_REGS_SECTOR_COUNT; + buf[i++] = qc->tf.lbal; + buf[i++] = ADMA_REGS_LBA_LOW; + buf[i++] = qc->tf.lbam; + buf[i++] = ADMA_REGS_LBA_MID; + buf[i++] = qc->tf.lbah; + buf[i++] = ADMA_REGS_LBA_HIGH; + buf[i++] = 0; + buf[i++] = ADMA_REGS_CONTROL; + buf[i++] = rIGN; + buf[i++] = 0; + buf[i++] = qc->tf.command; + buf[i++] = ADMA_REGS_COMMAND | rEND; + + buf[3] = (i >> 3) - 2; /* cLEN */ + *(__le32 *)(buf+8) = cpu_to_le32(pkt_dma + i); /* cPRD */ + + i = adma_fill_sg(qc); + wmb(); /* flush PRDs and pkt to memory */ +#if 0 + /* dump out CPB + PRDs for debug */ + { + int j, len = 0; + static char obuf[2048]; + for (j = 0; j < i; ++j) { + len += sprintf(obuf+len, "%02x ", buf[j]); + if ((j & 7) == 7) { + printk("%s\n", obuf); + len = 0; + } + } + if (len) + printk("%s\n", obuf); + } +#endif +} + +static inline void adma_packet_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *chan = ADMA_REGS(ap->host_set->mmio_base, ap->port_no); + + VPRINTK("ENTER, ap %p\n", ap); + + /* fire up the ADMA engine */ + writew(aPIOMD4 | aGO, chan + ADMA_CONTROL); +} + +static unsigned int adma_qc_issue(struct ata_queued_cmd *qc) +{ + struct adma_port_priv *pp = qc->ap->private_data; + + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + pp->state = adma_state_pkt; + adma_packet_start(qc); + return 0; + + case ATA_PROT_ATAPI_DMA: + BUG(); + break; + + default: + break; + } + + pp->state = adma_state_mmio; + return ata_qc_issue_prot(qc); +} + +static inline unsigned int adma_intr_pkt(struct ata_host_set *host_set) +{ + unsigned int handled = 0, port_no; + u8 __iomem *mmio_base = host_set->mmio_base; + + for (port_no = 0; port_no < host_set->n_ports; ++port_no) { + struct ata_port *ap = host_set->ports[port_no]; + struct adma_port_priv *pp; + struct ata_queued_cmd *qc; + void __iomem *chan = ADMA_REGS(mmio_base, port_no); + u8 status = readb(chan + ADMA_STATUS); + + if (status == 0) + continue; + handled = 1; + adma_enter_reg_mode(ap); + if (ap->flags & ATA_FLAG_DISABLED) + continue; + pp = ap->private_data; + if (!pp || pp->state != adma_state_pkt) + continue; + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { + if ((status & (aPERR | aPSD | aUIRQ))) + qc->err_mask |= AC_ERR_OTHER; + else if (pp->pkt[0] != cDONE) + qc->err_mask |= AC_ERR_OTHER; + + ata_qc_complete(qc); + } + } + return handled; +} + +static inline unsigned int adma_intr_mmio(struct ata_host_set *host_set) +{ + unsigned int handled = 0, port_no; + + for (port_no = 0; port_no < host_set->n_ports; ++port_no) { + struct ata_port *ap; + ap = host_set->ports[port_no]; + if (ap && (!(ap->flags & ATA_FLAG_DISABLED))) { + struct ata_queued_cmd *qc; + struct adma_port_priv *pp = ap->private_data; + if (!pp || pp->state != adma_state_mmio) + continue; + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { + + /* check main status, clearing INTRQ */ + u8 status = ata_check_status(ap); + if ((status & ATA_BUSY)) + continue; + DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n", + ap->id, qc->tf.protocol, status); + + /* complete taskfile transaction */ + pp->state = adma_state_idle; + qc->err_mask |= ac_err_mask(status); + ata_qc_complete(qc); + handled = 1; + } + } + } + return handled; +} + +static irqreturn_t adma_intr(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + unsigned int handled = 0; + + VPRINTK("ENTER\n"); + + spin_lock(&host_set->lock); + handled = adma_intr_pkt(host_set) | adma_intr_mmio(host_set); + spin_unlock(&host_set->lock); + + VPRINTK("EXIT\n"); + + return IRQ_RETVAL(handled); +} + +static void adma_ata_setup_port(struct ata_ioports *port, unsigned long base) +{ + port->cmd_addr = + port->data_addr = base + 0x000; + port->error_addr = + port->feature_addr = base + 0x004; + port->nsect_addr = base + 0x008; + port->lbal_addr = base + 0x00c; + port->lbam_addr = base + 0x010; + port->lbah_addr = base + 0x014; + port->device_addr = base + 0x018; + port->status_addr = + port->command_addr = base + 0x01c; + port->altstatus_addr = + port->ctl_addr = base + 0x038; +} + +static int adma_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct adma_port_priv *pp; + int rc; + + rc = ata_port_start(ap); + if (rc) + return rc; + adma_enter_reg_mode(ap); + rc = -ENOMEM; + pp = kcalloc(1, sizeof(*pp), GFP_KERNEL); + if (!pp) + goto err_out; + pp->pkt = dma_alloc_coherent(dev, ADMA_PKT_BYTES, &pp->pkt_dma, + GFP_KERNEL); + if (!pp->pkt) + goto err_out_kfree; + /* paranoia? */ + if ((pp->pkt_dma & 7) != 0) { + printk("bad alignment for pp->pkt_dma: %08x\n", + (u32)pp->pkt_dma); + dma_free_coherent(dev, ADMA_PKT_BYTES, + pp->pkt, pp->pkt_dma); + goto err_out_kfree; + } + memset(pp->pkt, 0, ADMA_PKT_BYTES); + ap->private_data = pp; + adma_reinit_engine(ap); + return 0; + +err_out_kfree: + kfree(pp); +err_out: + ata_port_stop(ap); + return rc; +} + +static void adma_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct adma_port_priv *pp = ap->private_data; + + adma_reset_engine(ADMA_REGS(ap->host_set->mmio_base, ap->port_no)); + if (pp != NULL) { + ap->private_data = NULL; + if (pp->pkt != NULL) + dma_free_coherent(dev, ADMA_PKT_BYTES, + pp->pkt, pp->pkt_dma); + kfree(pp); + } + ata_port_stop(ap); +} + +static void adma_host_stop(struct ata_host_set *host_set) +{ + unsigned int port_no; + + for (port_no = 0; port_no < ADMA_PORTS; ++port_no) + adma_reset_engine(ADMA_REGS(host_set->mmio_base, port_no)); + + ata_pci_host_stop(host_set); +} + +static void adma_host_init(unsigned int chip_id, + struct ata_probe_ent *probe_ent) +{ + unsigned int port_no; + void __iomem *mmio_base = probe_ent->mmio_base; + + /* enable/lock aGO operation */ + writeb(7, mmio_base + ADMA_MODE_LOCK); + + /* reset the ADMA logic */ + for (port_no = 0; port_no < ADMA_PORTS; ++port_no) + adma_reset_engine(ADMA_REGS(mmio_base, port_no)); +} + +static int adma_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base) +{ + int rc; + + rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "32-bit DMA enable failed\n"); + return rc; + } + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "32-bit consistent DMA enable failed\n"); + return rc; + } + return 0; +} + +static int adma_ata_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + static int printed_version; + struct ata_probe_ent *probe_ent = NULL; + void __iomem *mmio_base; + unsigned int board_idx = (unsigned int) ent->driver_data; + int rc, port_no; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) + goto err_out; + + if ((pci_resource_flags(pdev, 4) & IORESOURCE_MEM) == 0) { + rc = -ENODEV; + goto err_out_regions; + } + + mmio_base = pci_iomap(pdev, 4, 0); + if (mmio_base == NULL) { + rc = -ENOMEM; + goto err_out_regions; + } + + rc = adma_set_dma_masks(pdev, mmio_base); + if (rc) + goto err_out_iounmap; + + probe_ent = kcalloc(1, sizeof(*probe_ent), GFP_KERNEL); + if (probe_ent == NULL) { + rc = -ENOMEM; + goto err_out_iounmap; + } + + probe_ent->dev = pci_dev_to_dev(pdev); + INIT_LIST_HEAD(&probe_ent->node); + + probe_ent->sht = adma_port_info[board_idx].sht; + probe_ent->host_flags = adma_port_info[board_idx].host_flags; + probe_ent->pio_mask = adma_port_info[board_idx].pio_mask; + probe_ent->mwdma_mask = adma_port_info[board_idx].mwdma_mask; + probe_ent->udma_mask = adma_port_info[board_idx].udma_mask; + probe_ent->port_ops = adma_port_info[board_idx].port_ops; + + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = IRQF_SHARED; + probe_ent->mmio_base = mmio_base; + probe_ent->n_ports = ADMA_PORTS; + + for (port_no = 0; port_no < probe_ent->n_ports; ++port_no) { + adma_ata_setup_port(&probe_ent->port[port_no], + ADMA_ATA_REGS((unsigned long)mmio_base, port_no)); + } + + pci_set_master(pdev); + + /* initialize adapter */ + adma_host_init(board_idx, probe_ent); + + rc = ata_device_add(probe_ent); + kfree(probe_ent); + if (rc != ADMA_PORTS) + goto err_out_iounmap; + return 0; + +err_out_iounmap: + pci_iounmap(pdev, mmio_base); +err_out_regions: + pci_release_regions(pdev); +err_out: + pci_disable_device(pdev); + return rc; +} + +static int __init adma_ata_init(void) +{ + return pci_register_driver(&adma_ata_pci_driver); +} + +static void __exit adma_ata_exit(void) +{ + pci_unregister_driver(&adma_ata_pci_driver); +} + +MODULE_AUTHOR("Mark Lord"); +MODULE_DESCRIPTION("Pacific Digital Corporation ADMA low-level driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, adma_ata_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +module_init(adma_ata_init); +module_exit(adma_ata_exit); diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c new file mode 100644 index 00000000000..a2915a56acc --- /dev/null +++ b/drivers/ata/sata_mv.c @@ -0,0 +1,2468 @@ +/* + * sata_mv.c - Marvell SATA support + * + * Copyright 2005: EMC Corporation, all rights reserved. + * Copyright 2005 Red Hat, Inc. All rights reserved. + * + * Please ALWAYS copy linux-ide@vger.kernel.org on emails. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "sata_mv" +#define DRV_VERSION "0.7" + +enum { + /* BAR's are enumerated in terms of pci_resource_start() terms */ + MV_PRIMARY_BAR = 0, /* offset 0x10: memory space */ + MV_IO_BAR = 2, /* offset 0x18: IO space */ + MV_MISC_BAR = 3, /* offset 0x1c: FLASH, NVRAM, SRAM */ + + MV_MAJOR_REG_AREA_SZ = 0x10000, /* 64KB */ + MV_MINOR_REG_AREA_SZ = 0x2000, /* 8KB */ + + MV_PCI_REG_BASE = 0, + MV_IRQ_COAL_REG_BASE = 0x18000, /* 6xxx part only */ + MV_IRQ_COAL_CAUSE = (MV_IRQ_COAL_REG_BASE + 0x08), + MV_IRQ_COAL_CAUSE_LO = (MV_IRQ_COAL_REG_BASE + 0x88), + MV_IRQ_COAL_CAUSE_HI = (MV_IRQ_COAL_REG_BASE + 0x8c), + MV_IRQ_COAL_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xcc), + MV_IRQ_COAL_TIME_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xd0), + + MV_SATAHC0_REG_BASE = 0x20000, + MV_FLASH_CTL = 0x1046c, + MV_GPIO_PORT_CTL = 0x104f0, + MV_RESET_CFG = 0x180d8, + + MV_PCI_REG_SZ = MV_MAJOR_REG_AREA_SZ, + MV_SATAHC_REG_SZ = MV_MAJOR_REG_AREA_SZ, + MV_SATAHC_ARBTR_REG_SZ = MV_MINOR_REG_AREA_SZ, /* arbiter */ + MV_PORT_REG_SZ = MV_MINOR_REG_AREA_SZ, + + MV_USE_Q_DEPTH = ATA_DEF_QUEUE, + + MV_MAX_Q_DEPTH = 32, + MV_MAX_Q_DEPTH_MASK = MV_MAX_Q_DEPTH - 1, + + /* CRQB needs alignment on a 1KB boundary. Size == 1KB + * CRPB needs alignment on a 256B boundary. Size == 256B + * SG count of 176 leads to MV_PORT_PRIV_DMA_SZ == 4KB + * ePRD (SG) entries need alignment on a 16B boundary. Size == 16B + */ + MV_CRQB_Q_SZ = (32 * MV_MAX_Q_DEPTH), + MV_CRPB_Q_SZ = (8 * MV_MAX_Q_DEPTH), + MV_MAX_SG_CT = 176, + MV_SG_TBL_SZ = (16 * MV_MAX_SG_CT), + MV_PORT_PRIV_DMA_SZ = (MV_CRQB_Q_SZ + MV_CRPB_Q_SZ + MV_SG_TBL_SZ), + + MV_PORTS_PER_HC = 4, + /* == (port / MV_PORTS_PER_HC) to determine HC from 0-7 port */ + MV_PORT_HC_SHIFT = 2, + /* == (port % MV_PORTS_PER_HC) to determine hard port from 0-7 port */ + MV_PORT_MASK = 3, + + /* Host Flags */ + MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */ + MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */ + MV_COMMON_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | + ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING), + MV_6XXX_FLAGS = MV_FLAG_IRQ_COALESCE, + + CRQB_FLAG_READ = (1 << 0), + CRQB_TAG_SHIFT = 1, + CRQB_CMD_ADDR_SHIFT = 8, + CRQB_CMD_CS = (0x2 << 11), + CRQB_CMD_LAST = (1 << 15), + + CRPB_FLAG_STATUS_SHIFT = 8, + + EPRD_FLAG_END_OF_TBL = (1 << 31), + + /* PCI interface registers */ + + PCI_COMMAND_OFS = 0xc00, + + PCI_MAIN_CMD_STS_OFS = 0xd30, + STOP_PCI_MASTER = (1 << 2), + PCI_MASTER_EMPTY = (1 << 3), + GLOB_SFT_RST = (1 << 4), + + MV_PCI_MODE = 0xd00, + MV_PCI_EXP_ROM_BAR_CTL = 0xd2c, + MV_PCI_DISC_TIMER = 0xd04, + MV_PCI_MSI_TRIGGER = 0xc38, + MV_PCI_SERR_MASK = 0xc28, + MV_PCI_XBAR_TMOUT = 0x1d04, + MV_PCI_ERR_LOW_ADDRESS = 0x1d40, + MV_PCI_ERR_HIGH_ADDRESS = 0x1d44, + MV_PCI_ERR_ATTRIBUTE = 0x1d48, + MV_PCI_ERR_COMMAND = 0x1d50, + + PCI_IRQ_CAUSE_OFS = 0x1d58, + PCI_IRQ_MASK_OFS = 0x1d5c, + PCI_UNMASK_ALL_IRQS = 0x7fffff, /* bits 22-0 */ + + HC_MAIN_IRQ_CAUSE_OFS = 0x1d60, + HC_MAIN_IRQ_MASK_OFS = 0x1d64, + PORT0_ERR = (1 << 0), /* shift by port # */ + PORT0_DONE = (1 << 1), /* shift by port # */ + HC0_IRQ_PEND = 0x1ff, /* bits 0-8 = HC0's ports */ + HC_SHIFT = 9, /* bits 9-17 = HC1's ports */ + PCI_ERR = (1 << 18), + TRAN_LO_DONE = (1 << 19), /* 6xxx: IRQ coalescing */ + TRAN_HI_DONE = (1 << 20), /* 6xxx: IRQ coalescing */ + PORTS_0_7_COAL_DONE = (1 << 21), /* 6xxx: IRQ coalescing */ + GPIO_INT = (1 << 22), + SELF_INT = (1 << 23), + TWSI_INT = (1 << 24), + HC_MAIN_RSVD = (0x7f << 25), /* bits 31-25 */ + HC_MAIN_MASKED_IRQS = (TRAN_LO_DONE | TRAN_HI_DONE | + PORTS_0_7_COAL_DONE | GPIO_INT | TWSI_INT | + HC_MAIN_RSVD), + + /* SATAHC registers */ + HC_CFG_OFS = 0, + + HC_IRQ_CAUSE_OFS = 0x14, + CRPB_DMA_DONE = (1 << 0), /* shift by port # */ + HC_IRQ_COAL = (1 << 4), /* IRQ coalescing */ + DEV_IRQ = (1 << 8), /* shift by port # */ + + /* Shadow block registers */ + SHD_BLK_OFS = 0x100, + SHD_CTL_AST_OFS = 0x20, /* ofs from SHD_BLK_OFS */ + + /* SATA registers */ + SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */ + SATA_ACTIVE_OFS = 0x350, + PHY_MODE3 = 0x310, + PHY_MODE4 = 0x314, + PHY_MODE2 = 0x330, + MV5_PHY_MODE = 0x74, + MV5_LT_MODE = 0x30, + MV5_PHY_CTL = 0x0C, + SATA_INTERFACE_CTL = 0x050, + + MV_M2_PREAMP_MASK = 0x7e0, + + /* Port registers */ + EDMA_CFG_OFS = 0, + EDMA_CFG_Q_DEPTH = 0, /* queueing disabled */ + EDMA_CFG_NCQ = (1 << 5), + EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */ + EDMA_CFG_RD_BRST_EXT = (1 << 11), /* read burst 512B */ + EDMA_CFG_WR_BUFF_LEN = (1 << 13), /* write buffer 512B */ + + EDMA_ERR_IRQ_CAUSE_OFS = 0x8, + EDMA_ERR_IRQ_MASK_OFS = 0xc, + EDMA_ERR_D_PAR = (1 << 0), + EDMA_ERR_PRD_PAR = (1 << 1), + EDMA_ERR_DEV = (1 << 2), + EDMA_ERR_DEV_DCON = (1 << 3), + EDMA_ERR_DEV_CON = (1 << 4), + EDMA_ERR_SERR = (1 << 5), + EDMA_ERR_SELF_DIS = (1 << 7), + EDMA_ERR_BIST_ASYNC = (1 << 8), + EDMA_ERR_CRBQ_PAR = (1 << 9), + EDMA_ERR_CRPB_PAR = (1 << 10), + EDMA_ERR_INTRL_PAR = (1 << 11), + EDMA_ERR_IORDY = (1 << 12), + EDMA_ERR_LNK_CTRL_RX = (0xf << 13), + EDMA_ERR_LNK_CTRL_RX_2 = (1 << 15), + EDMA_ERR_LNK_DATA_RX = (0xf << 17), + EDMA_ERR_LNK_CTRL_TX = (0x1f << 21), + EDMA_ERR_LNK_DATA_TX = (0x1f << 26), + EDMA_ERR_TRANS_PROTO = (1 << 31), + EDMA_ERR_FATAL = (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR | + EDMA_ERR_DEV_DCON | EDMA_ERR_CRBQ_PAR | + EDMA_ERR_CRPB_PAR | EDMA_ERR_INTRL_PAR | + EDMA_ERR_IORDY | EDMA_ERR_LNK_CTRL_RX_2 | + EDMA_ERR_LNK_DATA_RX | + EDMA_ERR_LNK_DATA_TX | + EDMA_ERR_TRANS_PROTO), + + EDMA_REQ_Q_BASE_HI_OFS = 0x10, + EDMA_REQ_Q_IN_PTR_OFS = 0x14, /* also contains BASE_LO */ + + EDMA_REQ_Q_OUT_PTR_OFS = 0x18, + EDMA_REQ_Q_PTR_SHIFT = 5, + + EDMA_RSP_Q_BASE_HI_OFS = 0x1c, + EDMA_RSP_Q_IN_PTR_OFS = 0x20, + EDMA_RSP_Q_OUT_PTR_OFS = 0x24, /* also contains BASE_LO */ + EDMA_RSP_Q_PTR_SHIFT = 3, + + EDMA_CMD_OFS = 0x28, + EDMA_EN = (1 << 0), + EDMA_DS = (1 << 1), + ATA_RST = (1 << 2), + + EDMA_IORDY_TMOUT = 0x34, + EDMA_ARB_CFG = 0x38, + + /* Host private flags (hp_flags) */ + MV_HP_FLAG_MSI = (1 << 0), + MV_HP_ERRATA_50XXB0 = (1 << 1), + MV_HP_ERRATA_50XXB2 = (1 << 2), + MV_HP_ERRATA_60X1B2 = (1 << 3), + MV_HP_ERRATA_60X1C0 = (1 << 4), + MV_HP_ERRATA_XX42A0 = (1 << 5), + MV_HP_50XX = (1 << 6), + MV_HP_GEN_IIE = (1 << 7), + + /* Port private flags (pp_flags) */ + MV_PP_FLAG_EDMA_EN = (1 << 0), + MV_PP_FLAG_EDMA_DS_ACT = (1 << 1), +}; + +#define IS_50XX(hpriv) ((hpriv)->hp_flags & MV_HP_50XX) +#define IS_60XX(hpriv) (((hpriv)->hp_flags & MV_HP_50XX) == 0) +#define IS_GEN_I(hpriv) IS_50XX(hpriv) +#define IS_GEN_II(hpriv) IS_60XX(hpriv) +#define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE) + +enum { + /* Our DMA boundary is determined by an ePRD being unable to handle + * anything larger than 64KB + */ + MV_DMA_BOUNDARY = 0xffffU, + + EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U, + + EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U, +}; + +enum chip_type { + chip_504x, + chip_508x, + chip_5080, + chip_604x, + chip_608x, + chip_6042, + chip_7042, +}; + +/* Command ReQuest Block: 32B */ +struct mv_crqb { + __le32 sg_addr; + __le32 sg_addr_hi; + __le16 ctrl_flags; + __le16 ata_cmd[11]; +}; + +struct mv_crqb_iie { + __le32 addr; + __le32 addr_hi; + __le32 flags; + __le32 len; + __le32 ata_cmd[4]; +}; + +/* Command ResPonse Block: 8B */ +struct mv_crpb { + __le16 id; + __le16 flags; + __le32 tmstmp; +}; + +/* EDMA Physical Region Descriptor (ePRD); A.K.A. SG */ +struct mv_sg { + __le32 addr; + __le32 flags_size; + __le32 addr_hi; + __le32 reserved; +}; + +struct mv_port_priv { + struct mv_crqb *crqb; + dma_addr_t crqb_dma; + struct mv_crpb *crpb; + dma_addr_t crpb_dma; + struct mv_sg *sg_tbl; + dma_addr_t sg_tbl_dma; + u32 pp_flags; +}; + +struct mv_port_signal { + u32 amps; + u32 pre; +}; + +struct mv_host_priv; +struct mv_hw_ops { + void (*phy_errata)(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port); + void (*enable_leds)(struct mv_host_priv *hpriv, void __iomem *mmio); + void (*read_preamp)(struct mv_host_priv *hpriv, int idx, + void __iomem *mmio); + int (*reset_hc)(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int n_hc); + void (*reset_flash)(struct mv_host_priv *hpriv, void __iomem *mmio); + void (*reset_bus)(struct pci_dev *pdev, void __iomem *mmio); +}; + +struct mv_host_priv { + u32 hp_flags; + struct mv_port_signal signal[8]; + const struct mv_hw_ops *ops; +}; + +static void mv_irq_clear(struct ata_port *ap); +static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in); +static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val); +static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in); +static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val); +static void mv_phy_reset(struct ata_port *ap); +static void __mv_phy_reset(struct ata_port *ap, int can_sleep); +static void mv_host_stop(struct ata_host_set *host_set); +static int mv_port_start(struct ata_port *ap); +static void mv_port_stop(struct ata_port *ap); +static void mv_qc_prep(struct ata_queued_cmd *qc); +static void mv_qc_prep_iie(struct ata_queued_cmd *qc); +static unsigned int mv_qc_issue(struct ata_queued_cmd *qc); +static irqreturn_t mv_interrupt(int irq, void *dev_instance, + struct pt_regs *regs); +static void mv_eng_timeout(struct ata_port *ap); +static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); + +static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port); +static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio); +static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx, + void __iomem *mmio); +static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int n_hc); +static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio); +static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio); + +static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port); +static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio); +static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx, + void __iomem *mmio); +static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int n_hc); +static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio); +static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio); +static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port_no); +static void mv_stop_and_reset(struct ata_port *ap); + +static struct scsi_host_template mv_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = MV_USE_Q_DEPTH, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = MV_MAX_SG_CT / 2, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = MV_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations mv5_ops = { + .port_disable = ata_port_disable, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .phy_reset = mv_phy_reset, + + .qc_prep = mv_qc_prep, + .qc_issue = mv_qc_issue, + .data_xfer = ata_mmio_data_xfer, + + .eng_timeout = mv_eng_timeout, + + .irq_handler = mv_interrupt, + .irq_clear = mv_irq_clear, + + .scr_read = mv5_scr_read, + .scr_write = mv5_scr_write, + + .port_start = mv_port_start, + .port_stop = mv_port_stop, + .host_stop = mv_host_stop, +}; + +static const struct ata_port_operations mv6_ops = { + .port_disable = ata_port_disable, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .phy_reset = mv_phy_reset, + + .qc_prep = mv_qc_prep, + .qc_issue = mv_qc_issue, + .data_xfer = ata_mmio_data_xfer, + + .eng_timeout = mv_eng_timeout, + + .irq_handler = mv_interrupt, + .irq_clear = mv_irq_clear, + + .scr_read = mv_scr_read, + .scr_write = mv_scr_write, + + .port_start = mv_port_start, + .port_stop = mv_port_stop, + .host_stop = mv_host_stop, +}; + +static const struct ata_port_operations mv_iie_ops = { + .port_disable = ata_port_disable, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .phy_reset = mv_phy_reset, + + .qc_prep = mv_qc_prep_iie, + .qc_issue = mv_qc_issue, + + .eng_timeout = mv_eng_timeout, + + .irq_handler = mv_interrupt, + .irq_clear = mv_irq_clear, + + .scr_read = mv_scr_read, + .scr_write = mv_scr_write, + + .port_start = mv_port_start, + .port_stop = mv_port_stop, + .host_stop = mv_host_stop, +}; + +static const struct ata_port_info mv_port_info[] = { + { /* chip_504x */ + .sht = &mv_sht, + .host_flags = MV_COMMON_FLAGS, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &mv5_ops, + }, + { /* chip_508x */ + .sht = &mv_sht, + .host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &mv5_ops, + }, + { /* chip_5080 */ + .sht = &mv_sht, + .host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &mv5_ops, + }, + { /* chip_604x */ + .sht = &mv_sht, + .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &mv6_ops, + }, + { /* chip_608x */ + .sht = &mv_sht, + .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | + MV_FLAG_DUAL_HC), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &mv6_ops, + }, + { /* chip_6042 */ + .sht = &mv_sht, + .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &mv_iie_ops, + }, + { /* chip_7042 */ + .sht = &mv_sht, + .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | + MV_FLAG_DUAL_HC), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &mv_iie_ops, + }, +}; + +static const struct pci_device_id mv_pci_tbl[] = { + {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5040), 0, 0, chip_504x}, + {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5041), 0, 0, chip_504x}, + {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5080), 0, 0, chip_5080}, + {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5081), 0, 0, chip_508x}, + + {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6040), 0, 0, chip_604x}, + {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6041), 0, 0, chip_604x}, + {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6042), 0, 0, chip_6042}, + {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6080), 0, 0, chip_608x}, + {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6081), 0, 0, chip_608x}, + + {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, 0x0241), 0, 0, chip_604x}, + {} /* terminate list */ +}; + +static struct pci_driver mv_pci_driver = { + .name = DRV_NAME, + .id_table = mv_pci_tbl, + .probe = mv_init_one, + .remove = ata_pci_remove_one, +}; + +static const struct mv_hw_ops mv5xxx_ops = { + .phy_errata = mv5_phy_errata, + .enable_leds = mv5_enable_leds, + .read_preamp = mv5_read_preamp, + .reset_hc = mv5_reset_hc, + .reset_flash = mv5_reset_flash, + .reset_bus = mv5_reset_bus, +}; + +static const struct mv_hw_ops mv6xxx_ops = { + .phy_errata = mv6_phy_errata, + .enable_leds = mv6_enable_leds, + .read_preamp = mv6_read_preamp, + .reset_hc = mv6_reset_hc, + .reset_flash = mv6_reset_flash, + .reset_bus = mv_reset_pci_bus, +}; + +/* + * module options + */ +static int msi; /* Use PCI msi; either zero (off, default) or non-zero */ + + +/* + * Functions + */ + +static inline void writelfl(unsigned long data, void __iomem *addr) +{ + writel(data, addr); + (void) readl(addr); /* flush to avoid PCI posted write */ +} + +static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc) +{ + return (base + MV_SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ)); +} + +static inline unsigned int mv_hc_from_port(unsigned int port) +{ + return port >> MV_PORT_HC_SHIFT; +} + +static inline unsigned int mv_hardport_from_port(unsigned int port) +{ + return port & MV_PORT_MASK; +} + +static inline void __iomem *mv_hc_base_from_port(void __iomem *base, + unsigned int port) +{ + return mv_hc_base(base, mv_hc_from_port(port)); +} + +static inline void __iomem *mv_port_base(void __iomem *base, unsigned int port) +{ + return mv_hc_base_from_port(base, port) + + MV_SATAHC_ARBTR_REG_SZ + + (mv_hardport_from_port(port) * MV_PORT_REG_SZ); +} + +static inline void __iomem *mv_ap_base(struct ata_port *ap) +{ + return mv_port_base(ap->host_set->mmio_base, ap->port_no); +} + +static inline int mv_get_hc_count(unsigned long host_flags) +{ + return ((host_flags & MV_FLAG_DUAL_HC) ? 2 : 1); +} + +static void mv_irq_clear(struct ata_port *ap) +{ +} + +/** + * mv_start_dma - Enable eDMA engine + * @base: port base address + * @pp: port private data + * + * Verify the local cache of the eDMA state is accurate with a + * WARN_ON. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp) +{ + if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) { + writelfl(EDMA_EN, base + EDMA_CMD_OFS); + pp->pp_flags |= MV_PP_FLAG_EDMA_EN; + } + WARN_ON(!(EDMA_EN & readl(base + EDMA_CMD_OFS))); +} + +/** + * mv_stop_dma - Disable eDMA engine + * @ap: ATA channel to manipulate + * + * Verify the local cache of the eDMA state is accurate with a + * WARN_ON. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_stop_dma(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_port_priv *pp = ap->private_data; + u32 reg; + int i; + + if (MV_PP_FLAG_EDMA_EN & pp->pp_flags) { + /* Disable EDMA if active. The disable bit auto clears. + */ + writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS); + pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + } else { + WARN_ON(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)); + } + + /* now properly wait for the eDMA to stop */ + for (i = 1000; i > 0; i--) { + reg = readl(port_mmio + EDMA_CMD_OFS); + if (!(EDMA_EN & reg)) { + break; + } + udelay(100); + } + + if (EDMA_EN & reg) { + ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n"); + /* FIXME: Consider doing a reset here to recover */ + } +} + +#ifdef ATA_DEBUG +static void mv_dump_mem(void __iomem *start, unsigned bytes) +{ + int b, w; + for (b = 0; b < bytes; ) { + DPRINTK("%p: ", start + b); + for (w = 0; b < bytes && w < 4; w++) { + printk("%08x ",readl(start + b)); + b += sizeof(u32); + } + printk("\n"); + } +} +#endif + +static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes) +{ +#ifdef ATA_DEBUG + int b, w; + u32 dw; + for (b = 0; b < bytes; ) { + DPRINTK("%02x: ", b); + for (w = 0; b < bytes && w < 4; w++) { + (void) pci_read_config_dword(pdev,b,&dw); + printk("%08x ",dw); + b += sizeof(u32); + } + printk("\n"); + } +#endif +} +static void mv_dump_all_regs(void __iomem *mmio_base, int port, + struct pci_dev *pdev) +{ +#ifdef ATA_DEBUG + void __iomem *hc_base = mv_hc_base(mmio_base, + port >> MV_PORT_HC_SHIFT); + void __iomem *port_base; + int start_port, num_ports, p, start_hc, num_hcs, hc; + + if (0 > port) { + start_hc = start_port = 0; + num_ports = 8; /* shld be benign for 4 port devs */ + num_hcs = 2; + } else { + start_hc = port >> MV_PORT_HC_SHIFT; + start_port = port; + num_ports = num_hcs = 1; + } + DPRINTK("All registers for port(s) %u-%u:\n", start_port, + num_ports > 1 ? num_ports - 1 : start_port); + + if (NULL != pdev) { + DPRINTK("PCI config space regs:\n"); + mv_dump_pci_cfg(pdev, 0x68); + } + DPRINTK("PCI regs:\n"); + mv_dump_mem(mmio_base+0xc00, 0x3c); + mv_dump_mem(mmio_base+0xd00, 0x34); + mv_dump_mem(mmio_base+0xf00, 0x4); + mv_dump_mem(mmio_base+0x1d00, 0x6c); + for (hc = start_hc; hc < start_hc + num_hcs; hc++) { + hc_base = mv_hc_base(mmio_base, hc); + DPRINTK("HC regs (HC %i):\n", hc); + mv_dump_mem(hc_base, 0x1c); + } + for (p = start_port; p < start_port + num_ports; p++) { + port_base = mv_port_base(mmio_base, p); + DPRINTK("EDMA regs (port %i):\n",p); + mv_dump_mem(port_base, 0x54); + DPRINTK("SATA regs (port %i):\n",p); + mv_dump_mem(port_base+0x300, 0x60); + } +#endif +} + +static unsigned int mv_scr_offset(unsigned int sc_reg_in) +{ + unsigned int ofs; + + switch (sc_reg_in) { + case SCR_STATUS: + case SCR_CONTROL: + case SCR_ERROR: + ofs = SATA_STATUS_OFS + (sc_reg_in * sizeof(u32)); + break; + case SCR_ACTIVE: + ofs = SATA_ACTIVE_OFS; /* active is not with the others */ + break; + default: + ofs = 0xffffffffU; + break; + } + return ofs; +} + +static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in) +{ + unsigned int ofs = mv_scr_offset(sc_reg_in); + + if (0xffffffffU != ofs) { + return readl(mv_ap_base(ap) + ofs); + } else { + return (u32) ofs; + } +} + +static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) +{ + unsigned int ofs = mv_scr_offset(sc_reg_in); + + if (0xffffffffU != ofs) { + writelfl(val, mv_ap_base(ap) + ofs); + } +} + +/** + * mv_host_stop - Host specific cleanup/stop routine. + * @host_set: host data structure + * + * Disable ints, cleanup host memory, call general purpose + * host_stop. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_host_stop(struct ata_host_set *host_set) +{ + struct mv_host_priv *hpriv = host_set->private_data; + struct pci_dev *pdev = to_pci_dev(host_set->dev); + + if (hpriv->hp_flags & MV_HP_FLAG_MSI) { + pci_disable_msi(pdev); + } else { + pci_intx(pdev, 0); + } + kfree(hpriv); + ata_host_stop(host_set); +} + +static inline void mv_priv_free(struct mv_port_priv *pp, struct device *dev) +{ + dma_free_coherent(dev, MV_PORT_PRIV_DMA_SZ, pp->crpb, pp->crpb_dma); +} + +static void mv_edma_cfg(struct mv_host_priv *hpriv, void __iomem *port_mmio) +{ + u32 cfg = readl(port_mmio + EDMA_CFG_OFS); + + /* set up non-NCQ EDMA configuration */ + cfg &= ~0x1f; /* clear queue depth */ + cfg &= ~EDMA_CFG_NCQ; /* clear NCQ mode */ + cfg &= ~(1 << 9); /* disable equeue */ + + if (IS_GEN_I(hpriv)) + cfg |= (1 << 8); /* enab config burst size mask */ + + else if (IS_GEN_II(hpriv)) + cfg |= EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN; + + else if (IS_GEN_IIE(hpriv)) { + cfg |= (1 << 23); /* dis RX PM port mask */ + cfg &= ~(1 << 16); /* dis FIS-based switching (for now) */ + cfg &= ~(1 << 19); /* dis 128-entry queue (for now?) */ + cfg |= (1 << 18); /* enab early completion */ + cfg |= (1 << 17); /* enab host q cache */ + cfg |= (1 << 22); /* enab cutthrough */ + } + + writelfl(cfg, port_mmio + EDMA_CFG_OFS); +} + +/** + * mv_port_start - Port specific init/start routine. + * @ap: ATA channel to manipulate + * + * Allocate and point to DMA memory, init port private memory, + * zero indices. + * + * LOCKING: + * Inherited from caller. + */ +static int mv_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct mv_host_priv *hpriv = ap->host_set->private_data; + struct mv_port_priv *pp; + void __iomem *port_mmio = mv_ap_base(ap); + void *mem; + dma_addr_t mem_dma; + int rc = -ENOMEM; + + pp = kmalloc(sizeof(*pp), GFP_KERNEL); + if (!pp) + goto err_out; + memset(pp, 0, sizeof(*pp)); + + mem = dma_alloc_coherent(dev, MV_PORT_PRIV_DMA_SZ, &mem_dma, + GFP_KERNEL); + if (!mem) + goto err_out_pp; + memset(mem, 0, MV_PORT_PRIV_DMA_SZ); + + rc = ata_pad_alloc(ap, dev); + if (rc) + goto err_out_priv; + + /* First item in chunk of DMA memory: + * 32-slot command request table (CRQB), 32 bytes each in size + */ + pp->crqb = mem; + pp->crqb_dma = mem_dma; + mem += MV_CRQB_Q_SZ; + mem_dma += MV_CRQB_Q_SZ; + + /* Second item: + * 32-slot command response table (CRPB), 8 bytes each in size + */ + pp->crpb = mem; + pp->crpb_dma = mem_dma; + mem += MV_CRPB_Q_SZ; + mem_dma += MV_CRPB_Q_SZ; + + /* Third item: + * Table of scatter-gather descriptors (ePRD), 16 bytes each + */ + pp->sg_tbl = mem; + pp->sg_tbl_dma = mem_dma; + + mv_edma_cfg(hpriv, port_mmio); + + writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS); + writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK, + port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + + if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0) + writelfl(pp->crqb_dma & 0xffffffff, + port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); + else + writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); + + writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS); + + if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0) + writelfl(pp->crpb_dma & 0xffffffff, + port_mmio + EDMA_RSP_Q_IN_PTR_OFS); + else + writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS); + + writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK, + port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); + + /* Don't turn on EDMA here...do it before DMA commands only. Else + * we'll be unable to send non-data, PIO, etc due to restricted access + * to shadow regs. + */ + ap->private_data = pp; + return 0; + +err_out_priv: + mv_priv_free(pp, dev); +err_out_pp: + kfree(pp); +err_out: + return rc; +} + +/** + * mv_port_stop - Port specific cleanup/stop routine. + * @ap: ATA channel to manipulate + * + * Stop DMA, cleanup port memory. + * + * LOCKING: + * This routine uses the host_set lock to protect the DMA stop. + */ +static void mv_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct mv_port_priv *pp = ap->private_data; + unsigned long flags; + + spin_lock_irqsave(&ap->host_set->lock, flags); + mv_stop_dma(ap); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + ap->private_data = NULL; + ata_pad_free(ap, dev); + mv_priv_free(pp, dev); + kfree(pp); +} + +/** + * mv_fill_sg - Fill out the Marvell ePRD (scatter gather) entries + * @qc: queued command whose SG list to source from + * + * Populate the SG list and mark the last entry. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_fill_sg(struct ata_queued_cmd *qc) +{ + struct mv_port_priv *pp = qc->ap->private_data; + unsigned int i = 0; + struct scatterlist *sg; + + ata_for_each_sg(sg, qc) { + dma_addr_t addr; + u32 sg_len, len, offset; + + addr = sg_dma_address(sg); + sg_len = sg_dma_len(sg); + + while (sg_len) { + offset = addr & MV_DMA_BOUNDARY; + len = sg_len; + if ((offset + sg_len) > 0x10000) + len = 0x10000 - offset; + + pp->sg_tbl[i].addr = cpu_to_le32(addr & 0xffffffff); + pp->sg_tbl[i].addr_hi = cpu_to_le32((addr >> 16) >> 16); + pp->sg_tbl[i].flags_size = cpu_to_le32(len & 0xffff); + + sg_len -= len; + addr += len; + + if (!sg_len && ata_sg_is_last(sg, qc)) + pp->sg_tbl[i].flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL); + + i++; + } + } +} + +static inline unsigned mv_inc_q_index(unsigned index) +{ + return (index + 1) & MV_MAX_Q_DEPTH_MASK; +} + +static inline void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last) +{ + u16 tmp = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS | + (last ? CRQB_CMD_LAST : 0); + *cmdw = cpu_to_le16(tmp); +} + +/** + * mv_qc_prep - Host specific command preparation. + * @qc: queued command to prepare + * + * This routine simply redirects to the general purpose routine + * if command is not DMA. Else, it handles prep of the CRQB + * (command request block), does some sanity checking, and calls + * the SG load routine. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_qc_prep(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct mv_port_priv *pp = ap->private_data; + __le16 *cw; + struct ata_taskfile *tf; + u16 flags = 0; + unsigned in_index; + + if (ATA_PROT_DMA != qc->tf.protocol) + return; + + /* Fill in command request block + */ + if (!(qc->tf.flags & ATA_TFLAG_WRITE)) + flags |= CRQB_FLAG_READ; + WARN_ON(MV_MAX_Q_DEPTH <= qc->tag); + flags |= qc->tag << CRQB_TAG_SHIFT; + + /* get current queue index from hardware */ + in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS) + >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; + + pp->crqb[in_index].sg_addr = + cpu_to_le32(pp->sg_tbl_dma & 0xffffffff); + pp->crqb[in_index].sg_addr_hi = + cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16); + pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags); + + cw = &pp->crqb[in_index].ata_cmd[0]; + tf = &qc->tf; + + /* Sadly, the CRQB cannot accomodate all registers--there are + * only 11 bytes...so we must pick and choose required + * registers based on the command. So, we drop feature and + * hob_feature for [RW] DMA commands, but they are needed for + * NCQ. NCQ will drop hob_nsect. + */ + switch (tf->command) { + case ATA_CMD_READ: + case ATA_CMD_READ_EXT: + case ATA_CMD_WRITE: + case ATA_CMD_WRITE_EXT: + case ATA_CMD_WRITE_FUA_EXT: + mv_crqb_pack_cmd(cw++, tf->hob_nsect, ATA_REG_NSECT, 0); + break; +#ifdef LIBATA_NCQ /* FIXME: remove this line when NCQ added */ + case ATA_CMD_FPDMA_READ: + case ATA_CMD_FPDMA_WRITE: + mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0); + mv_crqb_pack_cmd(cw++, tf->feature, ATA_REG_FEATURE, 0); + break; +#endif /* FIXME: remove this line when NCQ added */ + default: + /* The only other commands EDMA supports in non-queued and + * non-NCQ mode are: [RW] STREAM DMA and W DMA FUA EXT, none + * of which are defined/used by Linux. If we get here, this + * driver needs work. + * + * FIXME: modify libata to give qc_prep a return value and + * return error here. + */ + BUG_ON(tf->command); + break; + } + mv_crqb_pack_cmd(cw++, tf->nsect, ATA_REG_NSECT, 0); + mv_crqb_pack_cmd(cw++, tf->hob_lbal, ATA_REG_LBAL, 0); + mv_crqb_pack_cmd(cw++, tf->lbal, ATA_REG_LBAL, 0); + mv_crqb_pack_cmd(cw++, tf->hob_lbam, ATA_REG_LBAM, 0); + mv_crqb_pack_cmd(cw++, tf->lbam, ATA_REG_LBAM, 0); + mv_crqb_pack_cmd(cw++, tf->hob_lbah, ATA_REG_LBAH, 0); + mv_crqb_pack_cmd(cw++, tf->lbah, ATA_REG_LBAH, 0); + mv_crqb_pack_cmd(cw++, tf->device, ATA_REG_DEVICE, 0); + mv_crqb_pack_cmd(cw++, tf->command, ATA_REG_CMD, 1); /* last */ + + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) + return; + mv_fill_sg(qc); +} + +/** + * mv_qc_prep_iie - Host specific command preparation. + * @qc: queued command to prepare + * + * This routine simply redirects to the general purpose routine + * if command is not DMA. Else, it handles prep of the CRQB + * (command request block), does some sanity checking, and calls + * the SG load routine. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_qc_prep_iie(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct mv_port_priv *pp = ap->private_data; + struct mv_crqb_iie *crqb; + struct ata_taskfile *tf; + unsigned in_index; + u32 flags = 0; + + if (ATA_PROT_DMA != qc->tf.protocol) + return; + + /* Fill in Gen IIE command request block + */ + if (!(qc->tf.flags & ATA_TFLAG_WRITE)) + flags |= CRQB_FLAG_READ; + + WARN_ON(MV_MAX_Q_DEPTH <= qc->tag); + flags |= qc->tag << CRQB_TAG_SHIFT; + + /* get current queue index from hardware */ + in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS) + >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; + + crqb = (struct mv_crqb_iie *) &pp->crqb[in_index]; + crqb->addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff); + crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16); + crqb->flags = cpu_to_le32(flags); + + tf = &qc->tf; + crqb->ata_cmd[0] = cpu_to_le32( + (tf->command << 16) | + (tf->feature << 24) + ); + crqb->ata_cmd[1] = cpu_to_le32( + (tf->lbal << 0) | + (tf->lbam << 8) | + (tf->lbah << 16) | + (tf->device << 24) + ); + crqb->ata_cmd[2] = cpu_to_le32( + (tf->hob_lbal << 0) | + (tf->hob_lbam << 8) | + (tf->hob_lbah << 16) | + (tf->hob_feature << 24) + ); + crqb->ata_cmd[3] = cpu_to_le32( + (tf->nsect << 0) | + (tf->hob_nsect << 8) + ); + + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) + return; + mv_fill_sg(qc); +} + +/** + * mv_qc_issue - Initiate a command to the host + * @qc: queued command to start + * + * This routine simply redirects to the general purpose routine + * if command is not DMA. Else, it sanity checks our local + * caches of the request producer/consumer indices then enables + * DMA and bumps the request producer index. + * + * LOCKING: + * Inherited from caller. + */ +static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) +{ + void __iomem *port_mmio = mv_ap_base(qc->ap); + struct mv_port_priv *pp = qc->ap->private_data; + unsigned in_index; + u32 in_ptr; + + if (ATA_PROT_DMA != qc->tf.protocol) { + /* We're about to send a non-EDMA capable command to the + * port. Turn off EDMA so there won't be problems accessing + * shadow block, etc registers. + */ + mv_stop_dma(qc->ap); + return ata_qc_issue_prot(qc); + } + + in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + in_index = (in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; + + /* until we do queuing, the queue should be empty at this point */ + WARN_ON(in_index != ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) + >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK)); + + in_index = mv_inc_q_index(in_index); /* now incr producer index */ + + mv_start_dma(port_mmio, pp); + + /* and write the request in pointer to kick the EDMA to life */ + in_ptr &= EDMA_REQ_Q_BASE_LO_MASK; + in_ptr |= in_index << EDMA_REQ_Q_PTR_SHIFT; + writelfl(in_ptr, port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + + return 0; +} + +/** + * mv_get_crpb_status - get status from most recently completed cmd + * @ap: ATA channel to manipulate + * + * This routine is for use when the port is in DMA mode, when it + * will be using the CRPB (command response block) method of + * returning command completion information. We check indices + * are good, grab status, and bump the response consumer index to + * prove that we're up to date. + * + * LOCKING: + * Inherited from caller. + */ +static u8 mv_get_crpb_status(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_port_priv *pp = ap->private_data; + unsigned out_index; + u32 out_ptr; + u8 ata_status; + + out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); + out_index = (out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; + + ata_status = le16_to_cpu(pp->crpb[out_index].flags) + >> CRPB_FLAG_STATUS_SHIFT; + + /* increment our consumer index... */ + out_index = mv_inc_q_index(out_index); + + /* and, until we do NCQ, there should only be 1 CRPB waiting */ + WARN_ON(out_index != ((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) + >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK)); + + /* write out our inc'd consumer index so EDMA knows we're caught up */ + out_ptr &= EDMA_RSP_Q_BASE_LO_MASK; + out_ptr |= out_index << EDMA_RSP_Q_PTR_SHIFT; + writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); + + /* Return ATA status register for completed CRPB */ + return ata_status; +} + +/** + * mv_err_intr - Handle error interrupts on the port + * @ap: ATA channel to manipulate + * @reset_allowed: bool: 0 == don't trigger from reset here + * + * In most cases, just clear the interrupt and move on. However, + * some cases require an eDMA reset, which is done right before + * the COMRESET in mv_phy_reset(). The SERR case requires a + * clear of pending errors in the SATA SERROR register. Finally, + * if the port disabled DMA, update our cached copy to match. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_err_intr(struct ata_port *ap, int reset_allowed) +{ + void __iomem *port_mmio = mv_ap_base(ap); + u32 edma_err_cause, serr = 0; + + edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + + if (EDMA_ERR_SERR & edma_err_cause) { + sata_scr_read(ap, SCR_ERROR, &serr); + sata_scr_write_flush(ap, SCR_ERROR, serr); + } + if (EDMA_ERR_SELF_DIS & edma_err_cause) { + struct mv_port_priv *pp = ap->private_data; + pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + } + DPRINTK(KERN_ERR "ata%u: port error; EDMA err cause: 0x%08x " + "SERR: 0x%08x\n", ap->id, edma_err_cause, serr); + + /* Clear EDMA now that SERR cleanup done */ + writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + + /* check for fatal here and recover if needed */ + if (reset_allowed && (EDMA_ERR_FATAL & edma_err_cause)) + mv_stop_and_reset(ap); +} + +/** + * mv_host_intr - Handle all interrupts on the given host controller + * @host_set: host specific structure + * @relevant: port error bits relevant to this host controller + * @hc: which host controller we're to look at + * + * Read then write clear the HC interrupt status then walk each + * port connected to the HC and see if it needs servicing. Port + * success ints are reported in the HC interrupt status reg, the + * port error ints are reported in the higher level main + * interrupt status register and thus are passed in via the + * 'relevant' argument. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, + unsigned int hc) +{ + void __iomem *mmio = host_set->mmio_base; + void __iomem *hc_mmio = mv_hc_base(mmio, hc); + struct ata_queued_cmd *qc; + u32 hc_irq_cause; + int shift, port, port0, hard_port, handled; + unsigned int err_mask; + + if (hc == 0) { + port0 = 0; + } else { + port0 = MV_PORTS_PER_HC; + } + + /* we'll need the HC success int register in most cases */ + hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS); + if (hc_irq_cause) { + writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); + } + + VPRINTK("ENTER, hc%u relevant=0x%08x HC IRQ cause=0x%08x\n", + hc,relevant,hc_irq_cause); + + for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) { + u8 ata_status = 0; + struct ata_port *ap = host_set->ports[port]; + struct mv_port_priv *pp = ap->private_data; + + hard_port = mv_hardport_from_port(port); /* range 0..3 */ + handled = 0; /* ensure ata_status is set if handled++ */ + + /* Note that DEV_IRQ might happen spuriously during EDMA, + * and should be ignored in such cases. + * The cause of this is still under investigation. + */ + if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) { + /* EDMA: check for response queue interrupt */ + if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause) { + ata_status = mv_get_crpb_status(ap); + handled = 1; + } + } else { + /* PIO: check for device (drive) interrupt */ + if ((DEV_IRQ << hard_port) & hc_irq_cause) { + ata_status = readb((void __iomem *) + ap->ioaddr.status_addr); + handled = 1; + /* ignore spurious intr if drive still BUSY */ + if (ata_status & ATA_BUSY) { + ata_status = 0; + handled = 0; + } + } + } + + if (ap && (ap->flags & ATA_FLAG_DISABLED)) + continue; + + err_mask = ac_err_mask(ata_status); + + shift = port << 1; /* (port * 2) */ + if (port >= MV_PORTS_PER_HC) { + shift++; /* skip bit 8 in the HC Main IRQ reg */ + } + if ((PORT0_ERR << shift) & relevant) { + mv_err_intr(ap, 1); + err_mask |= AC_ERR_OTHER; + handled = 1; + } + + if (handled) { + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc && (qc->flags & ATA_QCFLAG_ACTIVE)) { + VPRINTK("port %u IRQ found for qc, " + "ata_status 0x%x\n", port,ata_status); + /* mark qc status appropriately */ + if (!(qc->tf.flags & ATA_TFLAG_POLLING)) { + qc->err_mask |= err_mask; + ata_qc_complete(qc); + } + } + } + } + VPRINTK("EXIT\n"); +} + +/** + * mv_interrupt - + * @irq: unused + * @dev_instance: private data; in this case the host structure + * @regs: unused + * + * Read the read only register to determine if any host + * controllers have pending interrupts. If so, call lower level + * routine to handle. Also check for PCI errors which are only + * reported here. + * + * LOCKING: + * This routine holds the host_set lock while processing pending + * interrupts. + */ +static irqreturn_t mv_interrupt(int irq, void *dev_instance, + struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + unsigned int hc, handled = 0, n_hcs; + void __iomem *mmio = host_set->mmio_base; + struct mv_host_priv *hpriv; + u32 irq_stat; + + irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS); + + /* check the cases where we either have nothing pending or have read + * a bogus register value which can indicate HW removal or PCI fault + */ + if (!irq_stat || (0xffffffffU == irq_stat)) { + return IRQ_NONE; + } + + n_hcs = mv_get_hc_count(host_set->ports[0]->flags); + spin_lock(&host_set->lock); + + for (hc = 0; hc < n_hcs; hc++) { + u32 relevant = irq_stat & (HC0_IRQ_PEND << (hc * HC_SHIFT)); + if (relevant) { + mv_host_intr(host_set, relevant, hc); + handled++; + } + } + + hpriv = host_set->private_data; + if (IS_60XX(hpriv)) { + /* deal with the interrupt coalescing bits */ + if (irq_stat & (TRAN_LO_DONE | TRAN_HI_DONE | PORTS_0_7_COAL_DONE)) { + writelfl(0, mmio + MV_IRQ_COAL_CAUSE_LO); + writelfl(0, mmio + MV_IRQ_COAL_CAUSE_HI); + writelfl(0, mmio + MV_IRQ_COAL_CAUSE); + } + } + + if (PCI_ERR & irq_stat) { + printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n", + readl(mmio + PCI_IRQ_CAUSE_OFS)); + + DPRINTK("All regs @ PCI error\n"); + mv_dump_all_regs(mmio, -1, to_pci_dev(host_set->dev)); + + writelfl(0, mmio + PCI_IRQ_CAUSE_OFS); + handled++; + } + spin_unlock(&host_set->lock); + + return IRQ_RETVAL(handled); +} + +static void __iomem *mv5_phy_base(void __iomem *mmio, unsigned int port) +{ + void __iomem *hc_mmio = mv_hc_base_from_port(mmio, port); + unsigned long ofs = (mv_hardport_from_port(port) + 1) * 0x100UL; + + return hc_mmio + ofs; +} + +static unsigned int mv5_scr_offset(unsigned int sc_reg_in) +{ + unsigned int ofs; + + switch (sc_reg_in) { + case SCR_STATUS: + case SCR_ERROR: + case SCR_CONTROL: + ofs = sc_reg_in * sizeof(u32); + break; + default: + ofs = 0xffffffffU; + break; + } + return ofs; +} + +static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in) +{ + void __iomem *mmio = mv5_phy_base(ap->host_set->mmio_base, ap->port_no); + unsigned int ofs = mv5_scr_offset(sc_reg_in); + + if (ofs != 0xffffffffU) + return readl(mmio + ofs); + else + return (u32) ofs; +} + +static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) +{ + void __iomem *mmio = mv5_phy_base(ap->host_set->mmio_base, ap->port_no); + unsigned int ofs = mv5_scr_offset(sc_reg_in); + + if (ofs != 0xffffffffU) + writelfl(val, mmio + ofs); +} + +static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio) +{ + u8 rev_id; + int early_5080; + + pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id); + + early_5080 = (pdev->device == 0x5080) && (rev_id == 0); + + if (!early_5080) { + u32 tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL); + tmp |= (1 << 0); + writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL); + } + + mv_reset_pci_bus(pdev, mmio); +} + +static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio) +{ + writel(0x0fcfffff, mmio + MV_FLASH_CTL); +} + +static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx, + void __iomem *mmio) +{ + void __iomem *phy_mmio = mv5_phy_base(mmio, idx); + u32 tmp; + + tmp = readl(phy_mmio + MV5_PHY_MODE); + + hpriv->signal[idx].pre = tmp & 0x1800; /* bits 12:11 */ + hpriv->signal[idx].amps = tmp & 0xe0; /* bits 7:5 */ +} + +static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio) +{ + u32 tmp; + + writel(0, mmio + MV_GPIO_PORT_CTL); + + /* FIXME: handle MV_HP_ERRATA_50XXB2 errata */ + + tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL); + tmp |= ~(1 << 0); + writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL); +} + +static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port) +{ + void __iomem *phy_mmio = mv5_phy_base(mmio, port); + const u32 mask = (1<<12) | (1<<11) | (1<<7) | (1<<6) | (1<<5); + u32 tmp; + int fix_apm_sq = (hpriv->hp_flags & MV_HP_ERRATA_50XXB0); + + if (fix_apm_sq) { + tmp = readl(phy_mmio + MV5_LT_MODE); + tmp |= (1 << 19); + writel(tmp, phy_mmio + MV5_LT_MODE); + + tmp = readl(phy_mmio + MV5_PHY_CTL); + tmp &= ~0x3; + tmp |= 0x1; + writel(tmp, phy_mmio + MV5_PHY_CTL); + } + + tmp = readl(phy_mmio + MV5_PHY_MODE); + tmp &= ~mask; + tmp |= hpriv->signal[port].pre; + tmp |= hpriv->signal[port].amps; + writel(tmp, phy_mmio + MV5_PHY_MODE); +} + + +#undef ZERO +#define ZERO(reg) writel(0, port_mmio + (reg)) +static void mv5_reset_hc_port(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port) +{ + void __iomem *port_mmio = mv_port_base(mmio, port); + + writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS); + + mv_channel_reset(hpriv, mmio, port); + + ZERO(0x028); /* command */ + writel(0x11f, port_mmio + EDMA_CFG_OFS); + ZERO(0x004); /* timer */ + ZERO(0x008); /* irq err cause */ + ZERO(0x00c); /* irq err mask */ + ZERO(0x010); /* rq bah */ + ZERO(0x014); /* rq inp */ + ZERO(0x018); /* rq outp */ + ZERO(0x01c); /* respq bah */ + ZERO(0x024); /* respq outp */ + ZERO(0x020); /* respq inp */ + ZERO(0x02c); /* test control */ + writel(0xbc, port_mmio + EDMA_IORDY_TMOUT); +} +#undef ZERO + +#define ZERO(reg) writel(0, hc_mmio + (reg)) +static void mv5_reset_one_hc(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int hc) +{ + void __iomem *hc_mmio = mv_hc_base(mmio, hc); + u32 tmp; + + ZERO(0x00c); + ZERO(0x010); + ZERO(0x014); + ZERO(0x018); + + tmp = readl(hc_mmio + 0x20); + tmp &= 0x1c1c1c1c; + tmp |= 0x03030303; + writel(tmp, hc_mmio + 0x20); +} +#undef ZERO + +static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int n_hc) +{ + unsigned int hc, port; + + for (hc = 0; hc < n_hc; hc++) { + for (port = 0; port < MV_PORTS_PER_HC; port++) + mv5_reset_hc_port(hpriv, mmio, + (hc * MV_PORTS_PER_HC) + port); + + mv5_reset_one_hc(hpriv, mmio, hc); + } + + return 0; +} + +#undef ZERO +#define ZERO(reg) writel(0, mmio + (reg)) +static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio) +{ + u32 tmp; + + tmp = readl(mmio + MV_PCI_MODE); + tmp &= 0xff00ffff; + writel(tmp, mmio + MV_PCI_MODE); + + ZERO(MV_PCI_DISC_TIMER); + ZERO(MV_PCI_MSI_TRIGGER); + writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT); + ZERO(HC_MAIN_IRQ_MASK_OFS); + ZERO(MV_PCI_SERR_MASK); + ZERO(PCI_IRQ_CAUSE_OFS); + ZERO(PCI_IRQ_MASK_OFS); + ZERO(MV_PCI_ERR_LOW_ADDRESS); + ZERO(MV_PCI_ERR_HIGH_ADDRESS); + ZERO(MV_PCI_ERR_ATTRIBUTE); + ZERO(MV_PCI_ERR_COMMAND); +} +#undef ZERO + +static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio) +{ + u32 tmp; + + mv5_reset_flash(hpriv, mmio); + + tmp = readl(mmio + MV_GPIO_PORT_CTL); + tmp &= 0x3; + tmp |= (1 << 5) | (1 << 6); + writel(tmp, mmio + MV_GPIO_PORT_CTL); +} + +/** + * mv6_reset_hc - Perform the 6xxx global soft reset + * @mmio: base address of the HBA + * + * This routine only applies to 6xxx parts. + * + * LOCKING: + * Inherited from caller. + */ +static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int n_hc) +{ + void __iomem *reg = mmio + PCI_MAIN_CMD_STS_OFS; + int i, rc = 0; + u32 t; + + /* Following procedure defined in PCI "main command and status + * register" table. + */ + t = readl(reg); + writel(t | STOP_PCI_MASTER, reg); + + for (i = 0; i < 1000; i++) { + udelay(1); + t = readl(reg); + if (PCI_MASTER_EMPTY & t) { + break; + } + } + if (!(PCI_MASTER_EMPTY & t)) { + printk(KERN_ERR DRV_NAME ": PCI master won't flush\n"); + rc = 1; + goto done; + } + + /* set reset */ + i = 5; + do { + writel(t | GLOB_SFT_RST, reg); + t = readl(reg); + udelay(1); + } while (!(GLOB_SFT_RST & t) && (i-- > 0)); + + if (!(GLOB_SFT_RST & t)) { + printk(KERN_ERR DRV_NAME ": can't set global reset\n"); + rc = 1; + goto done; + } + + /* clear reset and *reenable the PCI master* (not mentioned in spec) */ + i = 5; + do { + writel(t & ~(GLOB_SFT_RST | STOP_PCI_MASTER), reg); + t = readl(reg); + udelay(1); + } while ((GLOB_SFT_RST & t) && (i-- > 0)); + + if (GLOB_SFT_RST & t) { + printk(KERN_ERR DRV_NAME ": can't clear global reset\n"); + rc = 1; + } +done: + return rc; +} + +static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx, + void __iomem *mmio) +{ + void __iomem *port_mmio; + u32 tmp; + + tmp = readl(mmio + MV_RESET_CFG); + if ((tmp & (1 << 0)) == 0) { + hpriv->signal[idx].amps = 0x7 << 8; + hpriv->signal[idx].pre = 0x1 << 5; + return; + } + + port_mmio = mv_port_base(mmio, idx); + tmp = readl(port_mmio + PHY_MODE2); + + hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */ + hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */ +} + +static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio) +{ + writel(0x00000060, mmio + MV_GPIO_PORT_CTL); +} + +static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port) +{ + void __iomem *port_mmio = mv_port_base(mmio, port); + + u32 hp_flags = hpriv->hp_flags; + int fix_phy_mode2 = + hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0); + int fix_phy_mode4 = + hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0); + u32 m2, tmp; + + if (fix_phy_mode2) { + m2 = readl(port_mmio + PHY_MODE2); + m2 &= ~(1 << 16); + m2 |= (1 << 31); + writel(m2, port_mmio + PHY_MODE2); + + udelay(200); + + m2 = readl(port_mmio + PHY_MODE2); + m2 &= ~((1 << 16) | (1 << 31)); + writel(m2, port_mmio + PHY_MODE2); + + udelay(200); + } + + /* who knows what this magic does */ + tmp = readl(port_mmio + PHY_MODE3); + tmp &= ~0x7F800000; + tmp |= 0x2A800000; + writel(tmp, port_mmio + PHY_MODE3); + + if (fix_phy_mode4) { + u32 m4; + + m4 = readl(port_mmio + PHY_MODE4); + + if (hp_flags & MV_HP_ERRATA_60X1B2) + tmp = readl(port_mmio + 0x310); + + m4 = (m4 & ~(1 << 1)) | (1 << 0); + + writel(m4, port_mmio + PHY_MODE4); + + if (hp_flags & MV_HP_ERRATA_60X1B2) + writel(tmp, port_mmio + 0x310); + } + + /* Revert values of pre-emphasis and signal amps to the saved ones */ + m2 = readl(port_mmio + PHY_MODE2); + + m2 &= ~MV_M2_PREAMP_MASK; + m2 |= hpriv->signal[port].amps; + m2 |= hpriv->signal[port].pre; + m2 &= ~(1 << 16); + + /* according to mvSata 3.6.1, some IIE values are fixed */ + if (IS_GEN_IIE(hpriv)) { + m2 &= ~0xC30FF01F; + m2 |= 0x0000900F; + } + + writel(m2, port_mmio + PHY_MODE2); +} + +static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port_no) +{ + void __iomem *port_mmio = mv_port_base(mmio, port_no); + + writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS); + + if (IS_60XX(hpriv)) { + u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL); + ifctl |= (1 << 7); /* enable gen2i speed */ + ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */ + writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL); + } + + udelay(25); /* allow reset propagation */ + + /* Spec never mentions clearing the bit. Marvell's driver does + * clear the bit, however. + */ + writelfl(0, port_mmio + EDMA_CMD_OFS); + + hpriv->ops->phy_errata(hpriv, mmio, port_no); + + if (IS_50XX(hpriv)) + mdelay(1); +} + +static void mv_stop_and_reset(struct ata_port *ap) +{ + struct mv_host_priv *hpriv = ap->host_set->private_data; + void __iomem *mmio = ap->host_set->mmio_base; + + mv_stop_dma(ap); + + mv_channel_reset(hpriv, mmio, ap->port_no); + + __mv_phy_reset(ap, 0); +} + +static inline void __msleep(unsigned int msec, int can_sleep) +{ + if (can_sleep) + msleep(msec); + else + mdelay(msec); +} + +/** + * __mv_phy_reset - Perform eDMA reset followed by COMRESET + * @ap: ATA channel to manipulate + * + * Part of this is taken from __sata_phy_reset and modified to + * not sleep since this routine gets called from interrupt level. + * + * LOCKING: + * Inherited from caller. This is coded to safe to call at + * interrupt level, i.e. it does not sleep. + */ +static void __mv_phy_reset(struct ata_port *ap, int can_sleep) +{ + struct mv_port_priv *pp = ap->private_data; + struct mv_host_priv *hpriv = ap->host_set->private_data; + void __iomem *port_mmio = mv_ap_base(ap); + struct ata_taskfile tf; + struct ata_device *dev = &ap->device[0]; + unsigned long timeout; + int retry = 5; + u32 sstatus; + + VPRINTK("ENTER, port %u, mmio 0x%p\n", ap->port_no, port_mmio); + + DPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x " + "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), + mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); + + /* Issue COMRESET via SControl */ +comreset_retry: + sata_scr_write_flush(ap, SCR_CONTROL, 0x301); + __msleep(1, can_sleep); + + sata_scr_write_flush(ap, SCR_CONTROL, 0x300); + __msleep(20, can_sleep); + + timeout = jiffies + msecs_to_jiffies(200); + do { + sata_scr_read(ap, SCR_STATUS, &sstatus); + sstatus &= 0x3; + if ((sstatus == 3) || (sstatus == 0)) + break; + + __msleep(1, can_sleep); + } while (time_before(jiffies, timeout)); + + /* work around errata */ + if (IS_60XX(hpriv) && + (sstatus != 0x0) && (sstatus != 0x113) && (sstatus != 0x123) && + (retry-- > 0)) + goto comreset_retry; + + DPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x " + "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), + mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); + + if (ata_port_online(ap)) { + ata_port_probe(ap); + } else { + sata_scr_read(ap, SCR_STATUS, &sstatus); + ata_port_printk(ap, KERN_INFO, + "no device found (phy stat %08x)\n", sstatus); + ata_port_disable(ap); + return; + } + ap->cbl = ATA_CBL_SATA; + + /* even after SStatus reflects that device is ready, + * it seems to take a while for link to be fully + * established (and thus Status no longer 0x80/0x7F), + * so we poll a bit for that, here. + */ + retry = 20; + while (1) { + u8 drv_stat = ata_check_status(ap); + if ((drv_stat != 0x80) && (drv_stat != 0x7f)) + break; + __msleep(500, can_sleep); + if (retry-- <= 0) + break; + } + + tf.lbah = readb((void __iomem *) ap->ioaddr.lbah_addr); + tf.lbam = readb((void __iomem *) ap->ioaddr.lbam_addr); + tf.lbal = readb((void __iomem *) ap->ioaddr.lbal_addr); + tf.nsect = readb((void __iomem *) ap->ioaddr.nsect_addr); + + dev->class = ata_dev_classify(&tf); + if (!ata_dev_enabled(dev)) { + VPRINTK("Port disabled post-sig: No device present.\n"); + ata_port_disable(ap); + } + + writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + + pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + + VPRINTK("EXIT\n"); +} + +static void mv_phy_reset(struct ata_port *ap) +{ + __mv_phy_reset(ap, 1); +} + +/** + * mv_eng_timeout - Routine called by libata when SCSI times out I/O + * @ap: ATA channel to manipulate + * + * Intent is to clear all pending error conditions, reset the + * chip/bus, fail the command, and move on. + * + * LOCKING: + * This routine holds the host_set lock while failing the command. + */ +static void mv_eng_timeout(struct ata_port *ap) +{ + struct ata_queued_cmd *qc; + unsigned long flags; + + ata_port_printk(ap, KERN_ERR, "Entering mv_eng_timeout\n"); + DPRINTK("All regs @ start of eng_timeout\n"); + mv_dump_all_regs(ap->host_set->mmio_base, ap->port_no, + to_pci_dev(ap->host_set->dev)); + + qc = ata_qc_from_tag(ap, ap->active_tag); + printk(KERN_ERR "mmio_base %p ap %p qc %p scsi_cmnd %p &cmnd %p\n", + ap->host_set->mmio_base, ap, qc, qc->scsicmd, + &qc->scsicmd->cmnd); + + spin_lock_irqsave(&ap->host_set->lock, flags); + mv_err_intr(ap, 0); + mv_stop_and_reset(ap); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); + if (qc->flags & ATA_QCFLAG_ACTIVE) { + qc->err_mask |= AC_ERR_TIMEOUT; + ata_eh_qc_complete(qc); + } +} + +/** + * mv_port_init - Perform some early initialization on a single port. + * @port: libata data structure storing shadow register addresses + * @port_mmio: base address of the port + * + * Initialize shadow register mmio addresses, clear outstanding + * interrupts on the port, and unmask interrupts for the future + * start of the port. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) +{ + unsigned long shd_base = (unsigned long) port_mmio + SHD_BLK_OFS; + unsigned serr_ofs; + + /* PIO related setup + */ + port->data_addr = shd_base + (sizeof(u32) * ATA_REG_DATA); + port->error_addr = + port->feature_addr = shd_base + (sizeof(u32) * ATA_REG_ERR); + port->nsect_addr = shd_base + (sizeof(u32) * ATA_REG_NSECT); + port->lbal_addr = shd_base + (sizeof(u32) * ATA_REG_LBAL); + port->lbam_addr = shd_base + (sizeof(u32) * ATA_REG_LBAM); + port->lbah_addr = shd_base + (sizeof(u32) * ATA_REG_LBAH); + port->device_addr = shd_base + (sizeof(u32) * ATA_REG_DEVICE); + port->status_addr = + port->command_addr = shd_base + (sizeof(u32) * ATA_REG_STATUS); + /* special case: control/altstatus doesn't have ATA_REG_ address */ + port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST_OFS; + + /* unused: */ + port->cmd_addr = port->bmdma_addr = port->scr_addr = 0; + + /* Clear any currently outstanding port interrupt conditions */ + serr_ofs = mv_scr_offset(SCR_ERROR); + writelfl(readl(port_mmio + serr_ofs), port_mmio + serr_ofs); + writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + + /* unmask all EDMA error interrupts */ + writelfl(~0, port_mmio + EDMA_ERR_IRQ_MASK_OFS); + + VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n", + readl(port_mmio + EDMA_CFG_OFS), + readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS), + readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS)); +} + +static int mv_chip_id(struct pci_dev *pdev, struct mv_host_priv *hpriv, + unsigned int board_idx) +{ + u8 rev_id; + u32 hp_flags = hpriv->hp_flags; + + pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id); + + switch(board_idx) { + case chip_5080: + hpriv->ops = &mv5xxx_ops; + hp_flags |= MV_HP_50XX; + + switch (rev_id) { + case 0x1: + hp_flags |= MV_HP_ERRATA_50XXB0; + break; + case 0x3: + hp_flags |= MV_HP_ERRATA_50XXB2; + break; + default: + dev_printk(KERN_WARNING, &pdev->dev, + "Applying 50XXB2 workarounds to unknown rev\n"); + hp_flags |= MV_HP_ERRATA_50XXB2; + break; + } + break; + + case chip_504x: + case chip_508x: + hpriv->ops = &mv5xxx_ops; + hp_flags |= MV_HP_50XX; + + switch (rev_id) { + case 0x0: + hp_flags |= MV_HP_ERRATA_50XXB0; + break; + case 0x3: + hp_flags |= MV_HP_ERRATA_50XXB2; + break; + default: + dev_printk(KERN_WARNING, &pdev->dev, + "Applying B2 workarounds to unknown rev\n"); + hp_flags |= MV_HP_ERRATA_50XXB2; + break; + } + break; + + case chip_604x: + case chip_608x: + hpriv->ops = &mv6xxx_ops; + + switch (rev_id) { + case 0x7: + hp_flags |= MV_HP_ERRATA_60X1B2; + break; + case 0x9: + hp_flags |= MV_HP_ERRATA_60X1C0; + break; + default: + dev_printk(KERN_WARNING, &pdev->dev, + "Applying B2 workarounds to unknown rev\n"); + hp_flags |= MV_HP_ERRATA_60X1B2; + break; + } + break; + + case chip_7042: + case chip_6042: + hpriv->ops = &mv6xxx_ops; + + hp_flags |= MV_HP_GEN_IIE; + + switch (rev_id) { + case 0x0: + hp_flags |= MV_HP_ERRATA_XX42A0; + break; + case 0x1: + hp_flags |= MV_HP_ERRATA_60X1C0; + break; + default: + dev_printk(KERN_WARNING, &pdev->dev, + "Applying 60X1C0 workarounds to unknown rev\n"); + hp_flags |= MV_HP_ERRATA_60X1C0; + break; + } + break; + + default: + printk(KERN_ERR DRV_NAME ": BUG: invalid board index %u\n", board_idx); + return 1; + } + + hpriv->hp_flags = hp_flags; + + return 0; +} + +/** + * mv_init_host - Perform some early initialization of the host. + * @pdev: host PCI device + * @probe_ent: early data struct representing the host + * + * If possible, do an early global reset of the host. Then do + * our port init and clear/unmask all/relevant host interrupts. + * + * LOCKING: + * Inherited from caller. + */ +static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent, + unsigned int board_idx) +{ + int rc = 0, n_hc, port, hc; + void __iomem *mmio = probe_ent->mmio_base; + struct mv_host_priv *hpriv = probe_ent->private_data; + + /* global interrupt mask */ + writel(0, mmio + HC_MAIN_IRQ_MASK_OFS); + + rc = mv_chip_id(pdev, hpriv, board_idx); + if (rc) + goto done; + + n_hc = mv_get_hc_count(probe_ent->host_flags); + probe_ent->n_ports = MV_PORTS_PER_HC * n_hc; + + for (port = 0; port < probe_ent->n_ports; port++) + hpriv->ops->read_preamp(hpriv, port, mmio); + + rc = hpriv->ops->reset_hc(hpriv, mmio, n_hc); + if (rc) + goto done; + + hpriv->ops->reset_flash(hpriv, mmio); + hpriv->ops->reset_bus(pdev, mmio); + hpriv->ops->enable_leds(hpriv, mmio); + + for (port = 0; port < probe_ent->n_ports; port++) { + if (IS_60XX(hpriv)) { + void __iomem *port_mmio = mv_port_base(mmio, port); + + u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL); + ifctl |= (1 << 7); /* enable gen2i speed */ + ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */ + writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL); + } + + hpriv->ops->phy_errata(hpriv, mmio, port); + } + + for (port = 0; port < probe_ent->n_ports; port++) { + void __iomem *port_mmio = mv_port_base(mmio, port); + mv_port_init(&probe_ent->port[port], port_mmio); + } + + for (hc = 0; hc < n_hc; hc++) { + void __iomem *hc_mmio = mv_hc_base(mmio, hc); + + VPRINTK("HC%i: HC config=0x%08x HC IRQ cause " + "(before clear)=0x%08x\n", hc, + readl(hc_mmio + HC_CFG_OFS), + readl(hc_mmio + HC_IRQ_CAUSE_OFS)); + + /* Clear any currently outstanding hc interrupt conditions */ + writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS); + } + + /* Clear any currently outstanding host interrupt conditions */ + writelfl(0, mmio + PCI_IRQ_CAUSE_OFS); + + /* and unmask interrupt generation for host regs */ + writelfl(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS); + writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS); + + VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x " + "PCI int cause/mask=0x%08x/0x%08x\n", + readl(mmio + HC_MAIN_IRQ_CAUSE_OFS), + readl(mmio + HC_MAIN_IRQ_MASK_OFS), + readl(mmio + PCI_IRQ_CAUSE_OFS), + readl(mmio + PCI_IRQ_MASK_OFS)); + +done: + return rc; +} + +/** + * mv_print_info - Dump key info to kernel log for perusal. + * @probe_ent: early data struct representing the host + * + * FIXME: complete this. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_print_info(struct ata_probe_ent *probe_ent) +{ + struct pci_dev *pdev = to_pci_dev(probe_ent->dev); + struct mv_host_priv *hpriv = probe_ent->private_data; + u8 rev_id, scc; + const char *scc_s; + + /* Use this to determine the HW stepping of the chip so we know + * what errata to workaround + */ + pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id); + + pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &scc); + if (scc == 0) + scc_s = "SCSI"; + else if (scc == 0x01) + scc_s = "RAID"; + else + scc_s = "unknown"; + + dev_printk(KERN_INFO, &pdev->dev, + "%u slots %u ports %s mode IRQ via %s\n", + (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports, + scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx"); +} + +/** + * mv_init_one - handle a positive probe of a Marvell host + * @pdev: PCI device found + * @ent: PCI device ID entry for the matched host + * + * LOCKING: + * Inherited from caller. + */ +static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version = 0; + struct ata_probe_ent *probe_ent = NULL; + struct mv_host_priv *hpriv; + unsigned int board_idx = (unsigned int)ent->driver_data; + void __iomem *mmio_base; + int pci_dev_busy = 0, rc; + + if (!printed_version++) + dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n"); + + rc = pci_enable_device(pdev); + if (rc) { + return rc; + } + pci_set_master(pdev); + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) { + pci_dev_busy = 1; + goto err_out; + } + + probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); + if (probe_ent == NULL) { + rc = -ENOMEM; + goto err_out_regions; + } + + memset(probe_ent, 0, sizeof(*probe_ent)); + probe_ent->dev = pci_dev_to_dev(pdev); + INIT_LIST_HEAD(&probe_ent->node); + + mmio_base = pci_iomap(pdev, MV_PRIMARY_BAR, 0); + if (mmio_base == NULL) { + rc = -ENOMEM; + goto err_out_free_ent; + } + + hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) { + rc = -ENOMEM; + goto err_out_iounmap; + } + memset(hpriv, 0, sizeof(*hpriv)); + + probe_ent->sht = mv_port_info[board_idx].sht; + probe_ent->host_flags = mv_port_info[board_idx].host_flags; + probe_ent->pio_mask = mv_port_info[board_idx].pio_mask; + probe_ent->udma_mask = mv_port_info[board_idx].udma_mask; + probe_ent->port_ops = mv_port_info[board_idx].port_ops; + + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = IRQF_SHARED; + probe_ent->mmio_base = mmio_base; + probe_ent->private_data = hpriv; + + /* initialize adapter */ + rc = mv_init_host(pdev, probe_ent, board_idx); + if (rc) { + goto err_out_hpriv; + } + + /* Enable interrupts */ + if (msi && pci_enable_msi(pdev) == 0) { + hpriv->hp_flags |= MV_HP_FLAG_MSI; + } else { + pci_intx(pdev, 1); + } + + mv_dump_pci_cfg(pdev, 0x68); + mv_print_info(probe_ent); + + if (ata_device_add(probe_ent) == 0) { + rc = -ENODEV; /* No devices discovered */ + goto err_out_dev_add; + } + + kfree(probe_ent); + return 0; + +err_out_dev_add: + if (MV_HP_FLAG_MSI & hpriv->hp_flags) { + pci_disable_msi(pdev); + } else { + pci_intx(pdev, 0); + } +err_out_hpriv: + kfree(hpriv); +err_out_iounmap: + pci_iounmap(pdev, mmio_base); +err_out_free_ent: + kfree(probe_ent); +err_out_regions: + pci_release_regions(pdev); +err_out: + if (!pci_dev_busy) { + pci_disable_device(pdev); + } + + return rc; +} + +static int __init mv_init(void) +{ + return pci_register_driver(&mv_pci_driver); +} + +static void __exit mv_exit(void) +{ + pci_unregister_driver(&mv_pci_driver); +} + +MODULE_AUTHOR("Brett Russ"); +MODULE_DESCRIPTION("SCSI low-level driver for Marvell SATA controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, mv_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +module_param(msi, int, 0444); +MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)"); + +module_init(mv_init); +module_exit(mv_exit); diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c new file mode 100644 index 00000000000..be46df75ab5 --- /dev/null +++ b/drivers/ata/sata_nv.c @@ -0,0 +1,595 @@ +/* + * sata_nv.c - NVIDIA nForce SATA + * + * Copyright 2004 NVIDIA Corp. All rights reserved. + * Copyright 2004 Andrew Chew + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * No hardware documentation available outside of NVIDIA. + * This driver programs the NVIDIA SATA controller in a similar + * fashion as with other PCI IDE BMDMA controllers, with a few + * NV-specific details such as register offsets, SATA phy location, + * hotplug info, etc. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "sata_nv" +#define DRV_VERSION "2.0" + +enum { + NV_PORTS = 2, + NV_PIO_MASK = 0x1f, + NV_MWDMA_MASK = 0x07, + NV_UDMA_MASK = 0x7f, + NV_PORT0_SCR_REG_OFFSET = 0x00, + NV_PORT1_SCR_REG_OFFSET = 0x40, + + /* INT_STATUS/ENABLE */ + NV_INT_STATUS = 0x10, + NV_INT_ENABLE = 0x11, + NV_INT_STATUS_CK804 = 0x440, + NV_INT_ENABLE_CK804 = 0x441, + + /* INT_STATUS/ENABLE bits */ + NV_INT_DEV = 0x01, + NV_INT_PM = 0x02, + NV_INT_ADDED = 0x04, + NV_INT_REMOVED = 0x08, + + NV_INT_PORT_SHIFT = 4, /* each port occupies 4 bits */ + + NV_INT_ALL = 0x0f, + NV_INT_MASK = NV_INT_DEV | + NV_INT_ADDED | NV_INT_REMOVED, + + /* INT_CONFIG */ + NV_INT_CONFIG = 0x12, + NV_INT_CONFIG_METHD = 0x01, // 0 = INT, 1 = SMI + + // For PCI config register 20 + NV_MCP_SATA_CFG_20 = 0x50, + NV_MCP_SATA_CFG_20_SATA_SPACE_EN = 0x04, +}; + +static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); +static void nv_ck804_host_stop(struct ata_host_set *host_set); +static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance, + struct pt_regs *regs); +static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance, + struct pt_regs *regs); +static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance, + struct pt_regs *regs); +static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg); +static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); + +static void nv_nf2_freeze(struct ata_port *ap); +static void nv_nf2_thaw(struct ata_port *ap); +static void nv_ck804_freeze(struct ata_port *ap); +static void nv_ck804_thaw(struct ata_port *ap); +static void nv_error_handler(struct ata_port *ap); + +enum nv_host_type +{ + GENERIC, + NFORCE2, + NFORCE3 = NFORCE2, /* NF2 == NF3 as far as sata_nv is concerned */ + CK804 +}; + +static const struct pci_device_id nv_pci_tbl[] = { + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, NFORCE2 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, NFORCE3 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, NFORCE3 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, 0x045c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, 0x045d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, 0x045e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, 0x045f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_STORAGE_RAID<<8, 0xffff00, GENERIC }, + { 0, } /* terminate list */ +}; + +static struct pci_driver nv_pci_driver = { + .name = DRV_NAME, + .id_table = nv_pci_tbl, + .probe = nv_init_one, + .remove = ata_pci_remove_one, +}; + +static struct scsi_host_template nv_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations nv_generic_ops = { + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .exec_command = ata_exec_command, + .check_status = ata_check_status, + .dev_select = ata_std_dev_select, + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = nv_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .data_xfer = ata_pio_data_xfer, + .irq_handler = nv_generic_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .scr_read = nv_scr_read, + .scr_write = nv_scr_write, + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_pci_host_stop, +}; + +static const struct ata_port_operations nv_nf2_ops = { + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .exec_command = ata_exec_command, + .check_status = ata_check_status, + .dev_select = ata_std_dev_select, + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .freeze = nv_nf2_freeze, + .thaw = nv_nf2_thaw, + .error_handler = nv_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .data_xfer = ata_pio_data_xfer, + .irq_handler = nv_nf2_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .scr_read = nv_scr_read, + .scr_write = nv_scr_write, + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_pci_host_stop, +}; + +static const struct ata_port_operations nv_ck804_ops = { + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .exec_command = ata_exec_command, + .check_status = ata_check_status, + .dev_select = ata_std_dev_select, + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .freeze = nv_ck804_freeze, + .thaw = nv_ck804_thaw, + .error_handler = nv_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .data_xfer = ata_pio_data_xfer, + .irq_handler = nv_ck804_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .scr_read = nv_scr_read, + .scr_write = nv_scr_write, + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = nv_ck804_host_stop, +}; + +static struct ata_port_info nv_port_info[] = { + /* generic */ + { + .sht = &nv_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .pio_mask = NV_PIO_MASK, + .mwdma_mask = NV_MWDMA_MASK, + .udma_mask = NV_UDMA_MASK, + .port_ops = &nv_generic_ops, + }, + /* nforce2/3 */ + { + .sht = &nv_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .pio_mask = NV_PIO_MASK, + .mwdma_mask = NV_MWDMA_MASK, + .udma_mask = NV_UDMA_MASK, + .port_ops = &nv_nf2_ops, + }, + /* ck804 */ + { + .sht = &nv_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .pio_mask = NV_PIO_MASK, + .mwdma_mask = NV_MWDMA_MASK, + .udma_mask = NV_UDMA_MASK, + .port_ops = &nv_ck804_ops, + }, +}; + +MODULE_AUTHOR("NVIDIA"); +MODULE_DESCRIPTION("low-level driver for NVIDIA nForce SATA controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, nv_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance, + struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + unsigned int i; + unsigned int handled = 0; + unsigned long flags; + + spin_lock_irqsave(&host_set->lock, flags); + + for (i = 0; i < host_set->n_ports; i++) { + struct ata_port *ap; + + ap = host_set->ports[i]; + if (ap && + !(ap->flags & ATA_FLAG_DISABLED)) { + struct ata_queued_cmd *qc; + + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) + handled += ata_host_intr(ap, qc); + else + // No request pending? Clear interrupt status + // anyway, in case there's one pending. + ap->ops->check_status(ap); + } + + } + + spin_unlock_irqrestore(&host_set->lock, flags); + + return IRQ_RETVAL(handled); +} + +static int nv_host_intr(struct ata_port *ap, u8 irq_stat) +{ + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); + int handled; + + /* freeze if hotplugged */ + if (unlikely(irq_stat & (NV_INT_ADDED | NV_INT_REMOVED))) { + ata_port_freeze(ap); + return 1; + } + + /* bail out if not our interrupt */ + if (!(irq_stat & NV_INT_DEV)) + return 0; + + /* DEV interrupt w/ no active qc? */ + if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) { + ata_check_status(ap); + return 1; + } + + /* handle interrupt */ + handled = ata_host_intr(ap, qc); + if (unlikely(!handled)) { + /* spurious, clear it */ + ata_check_status(ap); + } + + return 1; +} + +static irqreturn_t nv_do_interrupt(struct ata_host_set *host_set, u8 irq_stat) +{ + int i, handled = 0; + + for (i = 0; i < host_set->n_ports; i++) { + struct ata_port *ap = host_set->ports[i]; + + if (ap && !(ap->flags & ATA_FLAG_DISABLED)) + handled += nv_host_intr(ap, irq_stat); + + irq_stat >>= NV_INT_PORT_SHIFT; + } + + return IRQ_RETVAL(handled); +} + +static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance, + struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + u8 irq_stat; + irqreturn_t ret; + + spin_lock(&host_set->lock); + irq_stat = inb(host_set->ports[0]->ioaddr.scr_addr + NV_INT_STATUS); + ret = nv_do_interrupt(host_set, irq_stat); + spin_unlock(&host_set->lock); + + return ret; +} + +static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance, + struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + u8 irq_stat; + irqreturn_t ret; + + spin_lock(&host_set->lock); + irq_stat = readb(host_set->mmio_base + NV_INT_STATUS_CK804); + ret = nv_do_interrupt(host_set, irq_stat); + spin_unlock(&host_set->lock); + + return ret; +} + +static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg) +{ + if (sc_reg > SCR_CONTROL) + return 0xffffffffU; + + return ioread32((void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4)); +} + +static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) +{ + if (sc_reg > SCR_CONTROL) + return; + + iowrite32(val, (void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4)); +} + +static void nv_nf2_freeze(struct ata_port *ap) +{ + unsigned long scr_addr = ap->host_set->ports[0]->ioaddr.scr_addr; + int shift = ap->port_no * NV_INT_PORT_SHIFT; + u8 mask; + + mask = inb(scr_addr + NV_INT_ENABLE); + mask &= ~(NV_INT_ALL << shift); + outb(mask, scr_addr + NV_INT_ENABLE); +} + +static void nv_nf2_thaw(struct ata_port *ap) +{ + unsigned long scr_addr = ap->host_set->ports[0]->ioaddr.scr_addr; + int shift = ap->port_no * NV_INT_PORT_SHIFT; + u8 mask; + + outb(NV_INT_ALL << shift, scr_addr + NV_INT_STATUS); + + mask = inb(scr_addr + NV_INT_ENABLE); + mask |= (NV_INT_MASK << shift); + outb(mask, scr_addr + NV_INT_ENABLE); +} + +static void nv_ck804_freeze(struct ata_port *ap) +{ + void __iomem *mmio_base = ap->host_set->mmio_base; + int shift = ap->port_no * NV_INT_PORT_SHIFT; + u8 mask; + + mask = readb(mmio_base + NV_INT_ENABLE_CK804); + mask &= ~(NV_INT_ALL << shift); + writeb(mask, mmio_base + NV_INT_ENABLE_CK804); +} + +static void nv_ck804_thaw(struct ata_port *ap) +{ + void __iomem *mmio_base = ap->host_set->mmio_base; + int shift = ap->port_no * NV_INT_PORT_SHIFT; + u8 mask; + + writeb(NV_INT_ALL << shift, mmio_base + NV_INT_STATUS_CK804); + + mask = readb(mmio_base + NV_INT_ENABLE_CK804); + mask |= (NV_INT_MASK << shift); + writeb(mask, mmio_base + NV_INT_ENABLE_CK804); +} + +static int nv_hardreset(struct ata_port *ap, unsigned int *class) +{ + unsigned int dummy; + + /* SATA hardreset fails to retrieve proper device signature on + * some controllers. Don't classify on hardreset. For more + * info, see http://bugme.osdl.org/show_bug.cgi?id=3352 + */ + return sata_std_hardreset(ap, &dummy); +} + +static void nv_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, + nv_hardreset, ata_std_postreset); +} + +static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version = 0; + struct ata_port_info *ppi; + struct ata_probe_ent *probe_ent; + int pci_dev_busy = 0; + int rc; + u32 bar; + unsigned long base; + + // Make sure this is a SATA controller by counting the number of bars + // (NVIDIA SATA controllers will always have six bars). Otherwise, + // it's an IDE controller and we ignore it. + for (bar=0; bar<6; bar++) + if (pci_resource_start(pdev, bar) == 0) + return -ENODEV; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + + rc = pci_enable_device(pdev); + if (rc) + goto err_out; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) { + pci_dev_busy = 1; + goto err_out_disable; + } + + rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + + rc = -ENOMEM; + + ppi = &nv_port_info[ent->driver_data]; + probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); + if (!probe_ent) + goto err_out_regions; + + probe_ent->mmio_base = pci_iomap(pdev, 5, 0); + if (!probe_ent->mmio_base) { + rc = -EIO; + goto err_out_free_ent; + } + + base = (unsigned long)probe_ent->mmio_base; + + probe_ent->port[0].scr_addr = base + NV_PORT0_SCR_REG_OFFSET; + probe_ent->port[1].scr_addr = base + NV_PORT1_SCR_REG_OFFSET; + + /* enable SATA space for CK804 */ + if (ent->driver_data == CK804) { + u8 regval; + + pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val); + regval |= NV_MCP_SATA_CFG_20_SATA_SPACE_EN; + pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval); + } + + pci_set_master(pdev); + + rc = ata_device_add(probe_ent); + if (rc != NV_PORTS) + goto err_out_iounmap; + + kfree(probe_ent); + + return 0; + +err_out_iounmap: + pci_iounmap(pdev, probe_ent->mmio_base); +err_out_free_ent: + kfree(probe_ent); +err_out_regions: + pci_release_regions(pdev); +err_out_disable: + if (!pci_dev_busy) + pci_disable_device(pdev); +err_out: + return rc; +} + +static void nv_ck804_host_stop(struct ata_host_set *host_set) +{ + struct pci_dev *pdev = to_pci_dev(host_set->dev); + u8 regval; + + /* disable SATA space for CK804 */ + pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val); + regval &= ~NV_MCP_SATA_CFG_20_SATA_SPACE_EN; + pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval); + + ata_pci_host_stop(host_set); +} + +static int __init nv_init(void) +{ + return pci_register_driver(&nv_pci_driver); +} + +static void __exit nv_exit(void) +{ + pci_unregister_driver(&nv_pci_driver); +} + +module_init(nv_init); +module_exit(nv_exit); diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c new file mode 100644 index 00000000000..a5b3a7db7a9 --- /dev/null +++ b/drivers/ata/sata_promise.c @@ -0,0 +1,844 @@ +/* + * sata_promise.c - Promise SATA + * + * Maintained by: Jeff Garzik + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003-2004 Red Hat, Inc. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware information only available under NDA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "sata_promise.h" + +#define DRV_NAME "sata_promise" +#define DRV_VERSION "1.04" + + +enum { + PDC_PKT_SUBMIT = 0x40, /* Command packet pointer addr */ + PDC_INT_SEQMASK = 0x40, /* Mask of asserted SEQ INTs */ + PDC_TBG_MODE = 0x41, /* TBG mode */ + PDC_FLASH_CTL = 0x44, /* Flash control register */ + PDC_PCI_CTL = 0x48, /* PCI control and status register */ + PDC_GLOBAL_CTL = 0x48, /* Global control/status (per port) */ + PDC_CTLSTAT = 0x60, /* IDE control and status (per port) */ + PDC_SATA_PLUG_CSR = 0x6C, /* SATA Plug control/status reg */ + PDC2_SATA_PLUG_CSR = 0x60, /* SATAII Plug control/status reg */ + PDC_SLEW_CTL = 0x470, /* slew rate control reg */ + + PDC_ERR_MASK = (1<<19) | (1<<20) | (1<<21) | (1<<22) | + (1<<8) | (1<<9) | (1<<10), + + board_2037x = 0, /* FastTrak S150 TX2plus */ + board_20319 = 1, /* FastTrak S150 TX4 */ + board_20619 = 2, /* FastTrak TX4000 */ + board_20771 = 3, /* FastTrak TX2300 */ + board_2057x = 4, /* SATAII150 Tx2plus */ + board_40518 = 5, /* SATAII150 Tx4 */ + + PDC_HAS_PATA = (1 << 1), /* PDC20375/20575 has PATA */ + + PDC_RESET = (1 << 11), /* HDMA reset */ + + PDC_COMMON_FLAGS = ATA_FLAG_NO_LEGACY | ATA_FLAG_SRST | + ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI | + ATA_FLAG_PIO_POLLING, +}; + + +struct pdc_port_priv { + u8 *pkt; + dma_addr_t pkt_dma; +}; + +struct pdc_host_priv { + int hotplug_offset; +}; + +static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg); +static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); +static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); +static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *regs); +static void pdc_eng_timeout(struct ata_port *ap); +static int pdc_port_start(struct ata_port *ap); +static void pdc_port_stop(struct ata_port *ap); +static void pdc_pata_phy_reset(struct ata_port *ap); +static void pdc_sata_phy_reset(struct ata_port *ap); +static void pdc_qc_prep(struct ata_queued_cmd *qc); +static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf); +static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf); +static void pdc_irq_clear(struct ata_port *ap); +static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc); +static void pdc_host_stop(struct ata_host_set *host_set); + + +static struct scsi_host_template pdc_ata_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations pdc_sata_ops = { + .port_disable = ata_port_disable, + .tf_load = pdc_tf_load_mmio, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = pdc_exec_command_mmio, + .dev_select = ata_std_dev_select, + + .phy_reset = pdc_sata_phy_reset, + + .qc_prep = pdc_qc_prep, + .qc_issue = pdc_qc_issue_prot, + .eng_timeout = pdc_eng_timeout, + .data_xfer = ata_mmio_data_xfer, + .irq_handler = pdc_interrupt, + .irq_clear = pdc_irq_clear, + + .scr_read = pdc_sata_scr_read, + .scr_write = pdc_sata_scr_write, + .port_start = pdc_port_start, + .port_stop = pdc_port_stop, + .host_stop = pdc_host_stop, +}; + +static const struct ata_port_operations pdc_pata_ops = { + .port_disable = ata_port_disable, + .tf_load = pdc_tf_load_mmio, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = pdc_exec_command_mmio, + .dev_select = ata_std_dev_select, + + .phy_reset = pdc_pata_phy_reset, + + .qc_prep = pdc_qc_prep, + .qc_issue = pdc_qc_issue_prot, + .data_xfer = ata_mmio_data_xfer, + .eng_timeout = pdc_eng_timeout, + .irq_handler = pdc_interrupt, + .irq_clear = pdc_irq_clear, + + .port_start = pdc_port_start, + .port_stop = pdc_port_stop, + .host_stop = pdc_host_stop, +}; + +static const struct ata_port_info pdc_port_info[] = { + /* board_2037x */ + { + .sht = &pdc_ata_sht, + .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 ; FIXME */ + .port_ops = &pdc_sata_ops, + }, + + /* board_20319 */ + { + .sht = &pdc_ata_sht, + .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 ; FIXME */ + .port_ops = &pdc_sata_ops, + }, + + /* board_20619 */ + { + .sht = &pdc_ata_sht, + .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 ; FIXME */ + .port_ops = &pdc_pata_ops, + }, + + /* board_20771 */ + { + .sht = &pdc_ata_sht, + .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 ; FIXME */ + .port_ops = &pdc_sata_ops, + }, + + /* board_2057x */ + { + .sht = &pdc_ata_sht, + .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 ; FIXME */ + .port_ops = &pdc_sata_ops, + }, + + /* board_40518 */ + { + .sht = &pdc_ata_sht, + .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 ; FIXME */ + .port_ops = &pdc_sata_ops, + }, +}; + +static const struct pci_device_id pdc_ata_pci_tbl[] = { + { PCI_VENDOR_ID_PROMISE, 0x3371, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_2037x }, + { PCI_VENDOR_ID_PROMISE, 0x3570, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_2037x }, + { PCI_VENDOR_ID_PROMISE, 0x3571, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_2037x }, + { PCI_VENDOR_ID_PROMISE, 0x3373, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_2037x }, + { PCI_VENDOR_ID_PROMISE, 0x3375, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_2037x }, + { PCI_VENDOR_ID_PROMISE, 0x3376, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_2037x }, + { PCI_VENDOR_ID_PROMISE, 0x3574, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_2057x }, + { PCI_VENDOR_ID_PROMISE, 0x3d75, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_2057x }, + { PCI_VENDOR_ID_PROMISE, 0x3d73, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_2037x }, + + { PCI_VENDOR_ID_PROMISE, 0x3318, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_20319 }, + { PCI_VENDOR_ID_PROMISE, 0x3319, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_20319 }, + { PCI_VENDOR_ID_PROMISE, 0x3515, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_20319 }, + { PCI_VENDOR_ID_PROMISE, 0x3519, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_20319 }, + { PCI_VENDOR_ID_PROMISE, 0x3d17, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_20319 }, + { PCI_VENDOR_ID_PROMISE, 0x3d18, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_40518 }, + + { PCI_VENDOR_ID_PROMISE, 0x6629, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_20619 }, + +/* TODO: remove all associated board_20771 code, as it completely + * duplicates board_2037x code, unless reason for separation can be + * divined. + */ +#if 0 + { PCI_VENDOR_ID_PROMISE, 0x3570, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_20771 }, +#endif + + { } /* terminate list */ +}; + + +static struct pci_driver pdc_ata_pci_driver = { + .name = DRV_NAME, + .id_table = pdc_ata_pci_tbl, + .probe = pdc_ata_init_one, + .remove = ata_pci_remove_one, +}; + + +static int pdc_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct pdc_port_priv *pp; + int rc; + + rc = ata_port_start(ap); + if (rc) + return rc; + + pp = kzalloc(sizeof(*pp), GFP_KERNEL); + if (!pp) { + rc = -ENOMEM; + goto err_out; + } + + pp->pkt = dma_alloc_coherent(dev, 128, &pp->pkt_dma, GFP_KERNEL); + if (!pp->pkt) { + rc = -ENOMEM; + goto err_out_kfree; + } + + ap->private_data = pp; + + return 0; + +err_out_kfree: + kfree(pp); +err_out: + ata_port_stop(ap); + return rc; +} + + +static void pdc_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct pdc_port_priv *pp = ap->private_data; + + ap->private_data = NULL; + dma_free_coherent(dev, 128, pp->pkt, pp->pkt_dma); + kfree(pp); + ata_port_stop(ap); +} + + +static void pdc_host_stop(struct ata_host_set *host_set) +{ + struct pdc_host_priv *hp = host_set->private_data; + + ata_pci_host_stop(host_set); + + kfree(hp); +} + + +static void pdc_reset_port(struct ata_port *ap) +{ + void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr + PDC_CTLSTAT; + unsigned int i; + u32 tmp; + + for (i = 11; i > 0; i--) { + tmp = readl(mmio); + if (tmp & PDC_RESET) + break; + + udelay(100); + + tmp |= PDC_RESET; + writel(tmp, mmio); + } + + tmp &= ~PDC_RESET; + writel(tmp, mmio); + readl(mmio); /* flush */ +} + +static void pdc_sata_phy_reset(struct ata_port *ap) +{ + pdc_reset_port(ap); + sata_phy_reset(ap); +} + +static void pdc_pata_cbl_detect(struct ata_port *ap) +{ + u8 tmp; + void __iomem *mmio = (void *) ap->ioaddr.cmd_addr + PDC_CTLSTAT + 0x03; + + tmp = readb(mmio); + + if (tmp & 0x01) { + ap->cbl = ATA_CBL_PATA40; + ap->udma_mask &= ATA_UDMA_MASK_40C; + } else + ap->cbl = ATA_CBL_PATA80; +} + +static void pdc_pata_phy_reset(struct ata_port *ap) +{ + pdc_pata_cbl_detect(ap); + pdc_reset_port(ap); + ata_port_probe(ap); + ata_bus_reset(ap); +} + +static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) +{ + if (sc_reg > SCR_CONTROL) + return 0xffffffffU; + return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); +} + + +static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, + u32 val) +{ + if (sc_reg > SCR_CONTROL) + return; + writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); +} + +static void pdc_qc_prep(struct ata_queued_cmd *qc) +{ + struct pdc_port_priv *pp = qc->ap->private_data; + unsigned int i; + + VPRINTK("ENTER\n"); + + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + ata_qc_prep(qc); + /* fall through */ + + case ATA_PROT_NODATA: + i = pdc_pkt_header(&qc->tf, qc->ap->prd_dma, + qc->dev->devno, pp->pkt); + + if (qc->tf.flags & ATA_TFLAG_LBA48) + i = pdc_prep_lba48(&qc->tf, pp->pkt, i); + else + i = pdc_prep_lba28(&qc->tf, pp->pkt, i); + + pdc_pkt_footer(&qc->tf, pp->pkt, i); + break; + + default: + break; + } +} + +static void pdc_eng_timeout(struct ata_port *ap) +{ + struct ata_host_set *host_set = ap->host_set; + u8 drv_stat; + struct ata_queued_cmd *qc; + unsigned long flags; + + DPRINTK("ENTER\n"); + + spin_lock_irqsave(&host_set->lock, flags); + + qc = ata_qc_from_tag(ap, ap->active_tag); + + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + case ATA_PROT_NODATA: + ata_port_printk(ap, KERN_ERR, "command timeout\n"); + drv_stat = ata_wait_idle(ap); + qc->err_mask |= __ac_err_mask(drv_stat); + break; + + default: + drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); + + ata_port_printk(ap, KERN_ERR, + "unknown timeout, cmd 0x%x stat 0x%x\n", + qc->tf.command, drv_stat); + + qc->err_mask |= ac_err_mask(drv_stat); + break; + } + + spin_unlock_irqrestore(&host_set->lock, flags); + ata_eh_qc_complete(qc); + DPRINTK("EXIT\n"); +} + +static inline unsigned int pdc_host_intr( struct ata_port *ap, + struct ata_queued_cmd *qc) +{ + unsigned int handled = 0; + u32 tmp; + void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr + PDC_GLOBAL_CTL; + + tmp = readl(mmio); + if (tmp & PDC_ERR_MASK) { + qc->err_mask |= AC_ERR_DEV; + pdc_reset_port(ap); + } + + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + case ATA_PROT_NODATA: + qc->err_mask |= ac_err_mask(ata_wait_idle(ap)); + ata_qc_complete(qc); + handled = 1; + break; + + default: + ap->stats.idle_irq++; + break; + } + + return handled; +} + +static void pdc_irq_clear(struct ata_port *ap) +{ + struct ata_host_set *host_set = ap->host_set; + void __iomem *mmio = host_set->mmio_base; + + readl(mmio + PDC_INT_SEQMASK); +} + +static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + struct ata_port *ap; + u32 mask = 0; + unsigned int i, tmp; + unsigned int handled = 0; + void __iomem *mmio_base; + + VPRINTK("ENTER\n"); + + if (!host_set || !host_set->mmio_base) { + VPRINTK("QUICK EXIT\n"); + return IRQ_NONE; + } + + mmio_base = host_set->mmio_base; + + /* reading should also clear interrupts */ + mask = readl(mmio_base + PDC_INT_SEQMASK); + + if (mask == 0xffffffff) { + VPRINTK("QUICK EXIT 2\n"); + return IRQ_NONE; + } + + spin_lock(&host_set->lock); + + mask &= 0xffff; /* only 16 tags possible */ + if (!mask) { + VPRINTK("QUICK EXIT 3\n"); + goto done_irq; + } + + writel(mask, mmio_base + PDC_INT_SEQMASK); + + for (i = 0; i < host_set->n_ports; i++) { + VPRINTK("port %u\n", i); + ap = host_set->ports[i]; + tmp = mask & (1 << (i + 1)); + if (tmp && ap && + !(ap->flags & ATA_FLAG_DISABLED)) { + struct ata_queued_cmd *qc; + + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) + handled += pdc_host_intr(ap, qc); + } + } + + VPRINTK("EXIT\n"); + +done_irq: + spin_unlock(&host_set->lock); + return IRQ_RETVAL(handled); +} + +static inline void pdc_packet_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pdc_port_priv *pp = ap->private_data; + unsigned int port_no = ap->port_no; + u8 seq = (u8) (port_no + 1); + + VPRINTK("ENTER, ap %p\n", ap); + + writel(0x00000001, ap->host_set->mmio_base + (seq * 4)); + readl(ap->host_set->mmio_base + (seq * 4)); /* flush */ + + pp->pkt[2] = seq; + wmb(); /* flush PRD, pkt writes */ + writel(pp->pkt_dma, (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */ +} + +static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc) +{ + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + case ATA_PROT_NODATA: + pdc_packet_start(qc); + return 0; + + case ATA_PROT_ATAPI_DMA: + BUG(); + break; + + default: + break; + } + + return ata_qc_issue_prot(qc); +} + +static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) +{ + WARN_ON (tf->protocol == ATA_PROT_DMA || + tf->protocol == ATA_PROT_NODATA); + ata_tf_load(ap, tf); +} + + +static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) +{ + WARN_ON (tf->protocol == ATA_PROT_DMA || + tf->protocol == ATA_PROT_NODATA); + ata_exec_command(ap, tf); +} + + +static void pdc_ata_setup_port(struct ata_ioports *port, unsigned long base) +{ + port->cmd_addr = base; + port->data_addr = base; + port->feature_addr = + port->error_addr = base + 0x4; + port->nsect_addr = base + 0x8; + port->lbal_addr = base + 0xc; + port->lbam_addr = base + 0x10; + port->lbah_addr = base + 0x14; + port->device_addr = base + 0x18; + port->command_addr = + port->status_addr = base + 0x1c; + port->altstatus_addr = + port->ctl_addr = base + 0x38; +} + + +static void pdc_host_init(unsigned int chip_id, struct ata_probe_ent *pe) +{ + void __iomem *mmio = pe->mmio_base; + struct pdc_host_priv *hp = pe->private_data; + int hotplug_offset = hp->hotplug_offset; + u32 tmp; + + /* + * Except for the hotplug stuff, this is voodoo from the + * Promise driver. Label this entire section + * "TODO: figure out why we do this" + */ + + /* change FIFO_SHD to 8 dwords, enable BMR_BURST */ + tmp = readl(mmio + PDC_FLASH_CTL); + tmp |= 0x12000; /* bit 16 (fifo 8 dw) and 13 (bmr burst?) */ + writel(tmp, mmio + PDC_FLASH_CTL); + + /* clear plug/unplug flags for all ports */ + tmp = readl(mmio + hotplug_offset); + writel(tmp | 0xff, mmio + hotplug_offset); + + /* mask plug/unplug ints */ + tmp = readl(mmio + hotplug_offset); + writel(tmp | 0xff0000, mmio + hotplug_offset); + + /* reduce TBG clock to 133 Mhz. */ + tmp = readl(mmio + PDC_TBG_MODE); + tmp &= ~0x30000; /* clear bit 17, 16*/ + tmp |= 0x10000; /* set bit 17:16 = 0:1 */ + writel(tmp, mmio + PDC_TBG_MODE); + + readl(mmio + PDC_TBG_MODE); /* flush */ + msleep(10); + + /* adjust slew rate control register. */ + tmp = readl(mmio + PDC_SLEW_CTL); + tmp &= 0xFFFFF03F; /* clear bit 11 ~ 6 */ + tmp |= 0x00000900; /* set bit 11-9 = 100b , bit 8-6 = 100 */ + writel(tmp, mmio + PDC_SLEW_CTL); +} + +static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + struct ata_probe_ent *probe_ent = NULL; + struct pdc_host_priv *hp; + unsigned long base; + void __iomem *mmio_base; + unsigned int board_idx = (unsigned int) ent->driver_data; + int pci_dev_busy = 0; + int rc; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) { + pci_dev_busy = 1; + goto err_out; + } + + rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + + probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); + if (probe_ent == NULL) { + rc = -ENOMEM; + goto err_out_regions; + } + + probe_ent->dev = pci_dev_to_dev(pdev); + INIT_LIST_HEAD(&probe_ent->node); + + mmio_base = pci_iomap(pdev, 3, 0); + if (mmio_base == NULL) { + rc = -ENOMEM; + goto err_out_free_ent; + } + base = (unsigned long) mmio_base; + + hp = kzalloc(sizeof(*hp), GFP_KERNEL); + if (hp == NULL) { + rc = -ENOMEM; + goto err_out_free_ent; + } + + /* Set default hotplug offset */ + hp->hotplug_offset = PDC_SATA_PLUG_CSR; + probe_ent->private_data = hp; + + probe_ent->sht = pdc_port_info[board_idx].sht; + probe_ent->host_flags = pdc_port_info[board_idx].host_flags; + probe_ent->pio_mask = pdc_port_info[board_idx].pio_mask; + probe_ent->mwdma_mask = pdc_port_info[board_idx].mwdma_mask; + probe_ent->udma_mask = pdc_port_info[board_idx].udma_mask; + probe_ent->port_ops = pdc_port_info[board_idx].port_ops; + + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = IRQF_SHARED; + probe_ent->mmio_base = mmio_base; + + pdc_ata_setup_port(&probe_ent->port[0], base + 0x200); + pdc_ata_setup_port(&probe_ent->port[1], base + 0x280); + + probe_ent->port[0].scr_addr = base + 0x400; + probe_ent->port[1].scr_addr = base + 0x500; + + /* notice 4-port boards */ + switch (board_idx) { + case board_40518: + /* Override hotplug offset for SATAII150 */ + hp->hotplug_offset = PDC2_SATA_PLUG_CSR; + /* Fall through */ + case board_20319: + probe_ent->n_ports = 4; + + pdc_ata_setup_port(&probe_ent->port[2], base + 0x300); + pdc_ata_setup_port(&probe_ent->port[3], base + 0x380); + + probe_ent->port[2].scr_addr = base + 0x600; + probe_ent->port[3].scr_addr = base + 0x700; + break; + case board_2057x: + /* Override hotplug offset for SATAII150 */ + hp->hotplug_offset = PDC2_SATA_PLUG_CSR; + /* Fall through */ + case board_2037x: + probe_ent->n_ports = 2; + break; + case board_20771: + probe_ent->n_ports = 2; + break; + case board_20619: + probe_ent->n_ports = 4; + + pdc_ata_setup_port(&probe_ent->port[2], base + 0x300); + pdc_ata_setup_port(&probe_ent->port[3], base + 0x380); + + probe_ent->port[2].scr_addr = base + 0x600; + probe_ent->port[3].scr_addr = base + 0x700; + break; + default: + BUG(); + break; + } + + pci_set_master(pdev); + + /* initialize adapter */ + pdc_host_init(board_idx, probe_ent); + + /* FIXME: Need any other frees than hp? */ + if (!ata_device_add(probe_ent)) + kfree(hp); + + kfree(probe_ent); + + return 0; + +err_out_free_ent: + kfree(probe_ent); +err_out_regions: + pci_release_regions(pdev); +err_out: + if (!pci_dev_busy) + pci_disable_device(pdev); + return rc; +} + + +static int __init pdc_ata_init(void) +{ + return pci_register_driver(&pdc_ata_pci_driver); +} + + +static void __exit pdc_ata_exit(void) +{ + pci_unregister_driver(&pdc_ata_pci_driver); +} + + +MODULE_AUTHOR("Jeff Garzik"); +MODULE_DESCRIPTION("Promise ATA TX2/TX4/TX4000 low-level driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, pdc_ata_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +module_init(pdc_ata_init); +module_exit(pdc_ata_exit); diff --git a/drivers/ata/sata_promise.h b/drivers/ata/sata_promise.h new file mode 100644 index 00000000000..6ee5e190262 --- /dev/null +++ b/drivers/ata/sata_promise.h @@ -0,0 +1,157 @@ +/* + * sata_promise.h - Promise SATA common definitions and inline funcs + * + * Copyright 2003-2004 Red Hat, Inc. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + */ + +#ifndef __SATA_PROMISE_H__ +#define __SATA_PROMISE_H__ + +#include + +enum pdc_packet_bits { + PDC_PKT_READ = (1 << 2), + PDC_PKT_NODATA = (1 << 3), + + PDC_PKT_SIZEMASK = (1 << 7) | (1 << 6) | (1 << 5), + PDC_PKT_CLEAR_BSY = (1 << 4), + PDC_PKT_WAIT_DRDY = (1 << 3) | (1 << 4), + PDC_LAST_REG = (1 << 3), + + PDC_REG_DEVCTL = (1 << 3) | (1 << 2) | (1 << 1), +}; + +static inline unsigned int pdc_pkt_header(struct ata_taskfile *tf, + dma_addr_t sg_table, + unsigned int devno, u8 *buf) +{ + u8 dev_reg; + u32 *buf32 = (u32 *) buf; + + /* set control bits (byte 0), zero delay seq id (byte 3), + * and seq id (byte 2) + */ + switch (tf->protocol) { + case ATA_PROT_DMA: + if (!(tf->flags & ATA_TFLAG_WRITE)) + buf32[0] = cpu_to_le32(PDC_PKT_READ); + else + buf32[0] = 0; + break; + + case ATA_PROT_NODATA: + buf32[0] = cpu_to_le32(PDC_PKT_NODATA); + break; + + default: + BUG(); + break; + } + + buf32[1] = cpu_to_le32(sg_table); /* S/G table addr */ + buf32[2] = 0; /* no next-packet */ + + if (devno == 0) + dev_reg = ATA_DEVICE_OBS; + else + dev_reg = ATA_DEVICE_OBS | ATA_DEV1; + + /* select device */ + buf[12] = (1 << 5) | PDC_PKT_CLEAR_BSY | ATA_REG_DEVICE; + buf[13] = dev_reg; + + /* device control register */ + buf[14] = (1 << 5) | PDC_REG_DEVCTL; + buf[15] = tf->ctl; + + return 16; /* offset of next byte */ +} + +static inline unsigned int pdc_pkt_footer(struct ata_taskfile *tf, u8 *buf, + unsigned int i) +{ + if (tf->flags & ATA_TFLAG_DEVICE) { + buf[i++] = (1 << 5) | ATA_REG_DEVICE; + buf[i++] = tf->device; + } + + /* and finally the command itself; also includes end-of-pkt marker */ + buf[i++] = (1 << 5) | PDC_LAST_REG | ATA_REG_CMD; + buf[i++] = tf->command; + + return i; +} + +static inline unsigned int pdc_prep_lba28(struct ata_taskfile *tf, u8 *buf, unsigned int i) +{ + /* the "(1 << 5)" should be read "(count << 5)" */ + + /* ATA command block registers */ + buf[i++] = (1 << 5) | ATA_REG_FEATURE; + buf[i++] = tf->feature; + + buf[i++] = (1 << 5) | ATA_REG_NSECT; + buf[i++] = tf->nsect; + + buf[i++] = (1 << 5) | ATA_REG_LBAL; + buf[i++] = tf->lbal; + + buf[i++] = (1 << 5) | ATA_REG_LBAM; + buf[i++] = tf->lbam; + + buf[i++] = (1 << 5) | ATA_REG_LBAH; + buf[i++] = tf->lbah; + + return i; +} + +static inline unsigned int pdc_prep_lba48(struct ata_taskfile *tf, u8 *buf, unsigned int i) +{ + /* the "(2 << 5)" should be read "(count << 5)" */ + + /* ATA command block registers */ + buf[i++] = (2 << 5) | ATA_REG_FEATURE; + buf[i++] = tf->hob_feature; + buf[i++] = tf->feature; + + buf[i++] = (2 << 5) | ATA_REG_NSECT; + buf[i++] = tf->hob_nsect; + buf[i++] = tf->nsect; + + buf[i++] = (2 << 5) | ATA_REG_LBAL; + buf[i++] = tf->hob_lbal; + buf[i++] = tf->lbal; + + buf[i++] = (2 << 5) | ATA_REG_LBAM; + buf[i++] = tf->hob_lbam; + buf[i++] = tf->lbam; + + buf[i++] = (2 << 5) | ATA_REG_LBAH; + buf[i++] = tf->hob_lbah; + buf[i++] = tf->lbah; + + return i; +} + + +#endif /* __SATA_PROMISE_H__ */ diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c new file mode 100644 index 00000000000..71bd6712b37 --- /dev/null +++ b/drivers/ata/sata_qstor.c @@ -0,0 +1,730 @@ +/* + * sata_qstor.c - Pacific Digital Corporation QStor SATA + * + * Maintained by: Mark Lord + * + * Copyright 2005 Pacific Digital Corporation. + * (OSL/GPL code release authorized by Jalil Fadavi). + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "sata_qstor" +#define DRV_VERSION "0.06" + +enum { + QS_PORTS = 4, + QS_MAX_PRD = LIBATA_MAX_PRD, + QS_CPB_ORDER = 6, + QS_CPB_BYTES = (1 << QS_CPB_ORDER), + QS_PRD_BYTES = QS_MAX_PRD * 16, + QS_PKT_BYTES = QS_CPB_BYTES + QS_PRD_BYTES, + + /* global register offsets */ + QS_HCF_CNFG3 = 0x0003, /* host configuration offset */ + QS_HID_HPHY = 0x0004, /* host physical interface info */ + QS_HCT_CTRL = 0x00e4, /* global interrupt mask offset */ + QS_HST_SFF = 0x0100, /* host status fifo offset */ + QS_HVS_SERD3 = 0x0393, /* PHY enable offset */ + + /* global control bits */ + QS_HPHY_64BIT = (1 << 1), /* 64-bit bus detected */ + QS_CNFG3_GSRST = 0x01, /* global chip reset */ + QS_SERD3_PHY_ENA = 0xf0, /* PHY detection ENAble*/ + + /* per-channel register offsets */ + QS_CCF_CPBA = 0x0710, /* chan CPB base address */ + QS_CCF_CSEP = 0x0718, /* chan CPB separation factor */ + QS_CFC_HUFT = 0x0800, /* host upstream fifo threshold */ + QS_CFC_HDFT = 0x0804, /* host downstream fifo threshold */ + QS_CFC_DUFT = 0x0808, /* dev upstream fifo threshold */ + QS_CFC_DDFT = 0x080c, /* dev downstream fifo threshold */ + QS_CCT_CTR0 = 0x0900, /* chan control-0 offset */ + QS_CCT_CTR1 = 0x0901, /* chan control-1 offset */ + QS_CCT_CFF = 0x0a00, /* chan command fifo offset */ + + /* channel control bits */ + QS_CTR0_REG = (1 << 1), /* register mode (vs. pkt mode) */ + QS_CTR0_CLER = (1 << 2), /* clear channel errors */ + QS_CTR1_RDEV = (1 << 1), /* sata phy/comms reset */ + QS_CTR1_RCHN = (1 << 4), /* reset channel logic */ + QS_CCF_RUN_PKT = 0x107, /* RUN a new dma PKT */ + + /* pkt sub-field headers */ + QS_HCB_HDR = 0x01, /* Host Control Block header */ + QS_DCB_HDR = 0x02, /* Device Control Block header */ + + /* pkt HCB flag bits */ + QS_HF_DIRO = (1 << 0), /* data DIRection Out */ + QS_HF_DAT = (1 << 3), /* DATa pkt */ + QS_HF_IEN = (1 << 4), /* Interrupt ENable */ + QS_HF_VLD = (1 << 5), /* VaLiD pkt */ + + /* pkt DCB flag bits */ + QS_DF_PORD = (1 << 2), /* Pio OR Dma */ + QS_DF_ELBA = (1 << 3), /* Extended LBA (lba48) */ + + /* PCI device IDs */ + board_2068_idx = 0, /* QStor 4-port SATA/RAID */ +}; + +enum { + QS_DMA_BOUNDARY = ~0UL +}; + +typedef enum { qs_state_idle, qs_state_pkt, qs_state_mmio } qs_state_t; + +struct qs_port_priv { + u8 *pkt; + dma_addr_t pkt_dma; + qs_state_t state; +}; + +static u32 qs_scr_read (struct ata_port *ap, unsigned int sc_reg); +static void qs_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); +static int qs_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); +static irqreturn_t qs_intr (int irq, void *dev_instance, struct pt_regs *regs); +static int qs_port_start(struct ata_port *ap); +static void qs_host_stop(struct ata_host_set *host_set); +static void qs_port_stop(struct ata_port *ap); +static void qs_phy_reset(struct ata_port *ap); +static void qs_qc_prep(struct ata_queued_cmd *qc); +static unsigned int qs_qc_issue(struct ata_queued_cmd *qc); +static int qs_check_atapi_dma(struct ata_queued_cmd *qc); +static void qs_bmdma_stop(struct ata_queued_cmd *qc); +static u8 qs_bmdma_status(struct ata_port *ap); +static void qs_irq_clear(struct ata_port *ap); +static void qs_eng_timeout(struct ata_port *ap); + +static struct scsi_host_template qs_ata_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = QS_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + //FIXME .use_clustering = ATA_SHT_USE_CLUSTERING, + .use_clustering = ENABLE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = QS_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations qs_ata_ops = { + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .check_atapi_dma = qs_check_atapi_dma, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + .phy_reset = qs_phy_reset, + .qc_prep = qs_qc_prep, + .qc_issue = qs_qc_issue, + .data_xfer = ata_mmio_data_xfer, + .eng_timeout = qs_eng_timeout, + .irq_handler = qs_intr, + .irq_clear = qs_irq_clear, + .scr_read = qs_scr_read, + .scr_write = qs_scr_write, + .port_start = qs_port_start, + .port_stop = qs_port_stop, + .host_stop = qs_host_stop, + .bmdma_stop = qs_bmdma_stop, + .bmdma_status = qs_bmdma_status, +}; + +static const struct ata_port_info qs_port_info[] = { + /* board_2068_idx */ + { + .sht = &qs_ata_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SATA_RESET | + //FIXME ATA_FLAG_SRST | + ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING, + .pio_mask = 0x10, /* pio4 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &qs_ata_ops, + }, +}; + +static const struct pci_device_id qs_ata_pci_tbl[] = { + { PCI_VENDOR_ID_PDC, 0x2068, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_2068_idx }, + + { } /* terminate list */ +}; + +static struct pci_driver qs_ata_pci_driver = { + .name = DRV_NAME, + .id_table = qs_ata_pci_tbl, + .probe = qs_ata_init_one, + .remove = ata_pci_remove_one, +}; + +static int qs_check_atapi_dma(struct ata_queued_cmd *qc) +{ + return 1; /* ATAPI DMA not supported */ +} + +static void qs_bmdma_stop(struct ata_queued_cmd *qc) +{ + /* nothing */ +} + +static u8 qs_bmdma_status(struct ata_port *ap) +{ + return 0; +} + +static void qs_irq_clear(struct ata_port *ap) +{ + /* nothing */ +} + +static inline void qs_enter_reg_mode(struct ata_port *ap) +{ + u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000); + + writeb(QS_CTR0_REG, chan + QS_CCT_CTR0); + readb(chan + QS_CCT_CTR0); /* flush */ +} + +static inline void qs_reset_channel_logic(struct ata_port *ap) +{ + u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000); + + writeb(QS_CTR1_RCHN, chan + QS_CCT_CTR1); + readb(chan + QS_CCT_CTR0); /* flush */ + qs_enter_reg_mode(ap); +} + +static void qs_phy_reset(struct ata_port *ap) +{ + struct qs_port_priv *pp = ap->private_data; + + pp->state = qs_state_idle; + qs_reset_channel_logic(ap); + sata_phy_reset(ap); +} + +static void qs_eng_timeout(struct ata_port *ap) +{ + struct qs_port_priv *pp = ap->private_data; + + if (pp->state != qs_state_idle) /* healthy paranoia */ + pp->state = qs_state_mmio; + qs_reset_channel_logic(ap); + ata_eng_timeout(ap); +} + +static u32 qs_scr_read (struct ata_port *ap, unsigned int sc_reg) +{ + if (sc_reg > SCR_CONTROL) + return ~0U; + return readl((void __iomem *)(ap->ioaddr.scr_addr + (sc_reg * 8))); +} + +static void qs_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) +{ + if (sc_reg > SCR_CONTROL) + return; + writel(val, (void __iomem *)(ap->ioaddr.scr_addr + (sc_reg * 8))); +} + +static unsigned int qs_fill_sg(struct ata_queued_cmd *qc) +{ + struct scatterlist *sg; + struct ata_port *ap = qc->ap; + struct qs_port_priv *pp = ap->private_data; + unsigned int nelem; + u8 *prd = pp->pkt + QS_CPB_BYTES; + + WARN_ON(qc->__sg == NULL); + WARN_ON(qc->n_elem == 0 && qc->pad_len == 0); + + nelem = 0; + ata_for_each_sg(sg, qc) { + u64 addr; + u32 len; + + addr = sg_dma_address(sg); + *(__le64 *)prd = cpu_to_le64(addr); + prd += sizeof(u64); + + len = sg_dma_len(sg); + *(__le32 *)prd = cpu_to_le32(len); + prd += sizeof(u64); + + VPRINTK("PRD[%u] = (0x%llX, 0x%X)\n", nelem, + (unsigned long long)addr, len); + nelem++; + } + + return nelem; +} + +static void qs_qc_prep(struct ata_queued_cmd *qc) +{ + struct qs_port_priv *pp = qc->ap->private_data; + u8 dflags = QS_DF_PORD, *buf = pp->pkt; + u8 hflags = QS_HF_DAT | QS_HF_IEN | QS_HF_VLD; + u64 addr; + unsigned int nelem; + + VPRINTK("ENTER\n"); + + qs_enter_reg_mode(qc->ap); + if (qc->tf.protocol != ATA_PROT_DMA) { + ata_qc_prep(qc); + return; + } + + nelem = qs_fill_sg(qc); + + if ((qc->tf.flags & ATA_TFLAG_WRITE)) + hflags |= QS_HF_DIRO; + if ((qc->tf.flags & ATA_TFLAG_LBA48)) + dflags |= QS_DF_ELBA; + + /* host control block (HCB) */ + buf[ 0] = QS_HCB_HDR; + buf[ 1] = hflags; + *(__le32 *)(&buf[ 4]) = cpu_to_le32(qc->nsect * ATA_SECT_SIZE); + *(__le32 *)(&buf[ 8]) = cpu_to_le32(nelem); + addr = ((u64)pp->pkt_dma) + QS_CPB_BYTES; + *(__le64 *)(&buf[16]) = cpu_to_le64(addr); + + /* device control block (DCB) */ + buf[24] = QS_DCB_HDR; + buf[28] = dflags; + + /* frame information structure (FIS) */ + ata_tf_to_fis(&qc->tf, &buf[32], 0); +} + +static inline void qs_packet_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000); + + VPRINTK("ENTER, ap %p\n", ap); + + writeb(QS_CTR0_CLER, chan + QS_CCT_CTR0); + wmb(); /* flush PRDs and pkt to memory */ + writel(QS_CCF_RUN_PKT, chan + QS_CCT_CFF); + readl(chan + QS_CCT_CFF); /* flush */ +} + +static unsigned int qs_qc_issue(struct ata_queued_cmd *qc) +{ + struct qs_port_priv *pp = qc->ap->private_data; + + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + + pp->state = qs_state_pkt; + qs_packet_start(qc); + return 0; + + case ATA_PROT_ATAPI_DMA: + BUG(); + break; + + default: + break; + } + + pp->state = qs_state_mmio; + return ata_qc_issue_prot(qc); +} + +static inline unsigned int qs_intr_pkt(struct ata_host_set *host_set) +{ + unsigned int handled = 0; + u8 sFFE; + u8 __iomem *mmio_base = host_set->mmio_base; + + do { + u32 sff0 = readl(mmio_base + QS_HST_SFF); + u32 sff1 = readl(mmio_base + QS_HST_SFF + 4); + u8 sEVLD = (sff1 >> 30) & 0x01; /* valid flag */ + sFFE = sff1 >> 31; /* empty flag */ + + if (sEVLD) { + u8 sDST = sff0 >> 16; /* dev status */ + u8 sHST = sff1 & 0x3f; /* host status */ + unsigned int port_no = (sff1 >> 8) & 0x03; + struct ata_port *ap = host_set->ports[port_no]; + + DPRINTK("SFF=%08x%08x: sCHAN=%u sHST=%d sDST=%02x\n", + sff1, sff0, port_no, sHST, sDST); + handled = 1; + if (ap && !(ap->flags & ATA_FLAG_DISABLED)) { + struct ata_queued_cmd *qc; + struct qs_port_priv *pp = ap->private_data; + if (!pp || pp->state != qs_state_pkt) + continue; + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { + switch (sHST) { + case 0: /* successful CPB */ + case 3: /* device error */ + pp->state = qs_state_idle; + qs_enter_reg_mode(qc->ap); + qc->err_mask |= ac_err_mask(sDST); + ata_qc_complete(qc); + break; + default: + break; + } + } + } + } + } while (!sFFE); + return handled; +} + +static inline unsigned int qs_intr_mmio(struct ata_host_set *host_set) +{ + unsigned int handled = 0, port_no; + + for (port_no = 0; port_no < host_set->n_ports; ++port_no) { + struct ata_port *ap; + ap = host_set->ports[port_no]; + if (ap && + !(ap->flags & ATA_FLAG_DISABLED)) { + struct ata_queued_cmd *qc; + struct qs_port_priv *pp = ap->private_data; + if (!pp || pp->state != qs_state_mmio) + continue; + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { + + /* check main status, clearing INTRQ */ + u8 status = ata_check_status(ap); + if ((status & ATA_BUSY)) + continue; + DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n", + ap->id, qc->tf.protocol, status); + + /* complete taskfile transaction */ + pp->state = qs_state_idle; + qc->err_mask |= ac_err_mask(status); + ata_qc_complete(qc); + handled = 1; + } + } + } + return handled; +} + +static irqreturn_t qs_intr(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + unsigned int handled = 0; + + VPRINTK("ENTER\n"); + + spin_lock(&host_set->lock); + handled = qs_intr_pkt(host_set) | qs_intr_mmio(host_set); + spin_unlock(&host_set->lock); + + VPRINTK("EXIT\n"); + + return IRQ_RETVAL(handled); +} + +static void qs_ata_setup_port(struct ata_ioports *port, unsigned long base) +{ + port->cmd_addr = + port->data_addr = base + 0x400; + port->error_addr = + port->feature_addr = base + 0x408; /* hob_feature = 0x409 */ + port->nsect_addr = base + 0x410; /* hob_nsect = 0x411 */ + port->lbal_addr = base + 0x418; /* hob_lbal = 0x419 */ + port->lbam_addr = base + 0x420; /* hob_lbam = 0x421 */ + port->lbah_addr = base + 0x428; /* hob_lbah = 0x429 */ + port->device_addr = base + 0x430; + port->status_addr = + port->command_addr = base + 0x438; + port->altstatus_addr = + port->ctl_addr = base + 0x440; + port->scr_addr = base + 0xc00; +} + +static int qs_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct qs_port_priv *pp; + void __iomem *mmio_base = ap->host_set->mmio_base; + void __iomem *chan = mmio_base + (ap->port_no * 0x4000); + u64 addr; + int rc; + + rc = ata_port_start(ap); + if (rc) + return rc; + qs_enter_reg_mode(ap); + pp = kzalloc(sizeof(*pp), GFP_KERNEL); + if (!pp) { + rc = -ENOMEM; + goto err_out; + } + pp->pkt = dma_alloc_coherent(dev, QS_PKT_BYTES, &pp->pkt_dma, + GFP_KERNEL); + if (!pp->pkt) { + rc = -ENOMEM; + goto err_out_kfree; + } + memset(pp->pkt, 0, QS_PKT_BYTES); + ap->private_data = pp; + + addr = (u64)pp->pkt_dma; + writel((u32) addr, chan + QS_CCF_CPBA); + writel((u32)(addr >> 32), chan + QS_CCF_CPBA + 4); + return 0; + +err_out_kfree: + kfree(pp); +err_out: + ata_port_stop(ap); + return rc; +} + +static void qs_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct qs_port_priv *pp = ap->private_data; + + if (pp != NULL) { + ap->private_data = NULL; + if (pp->pkt != NULL) + dma_free_coherent(dev, QS_PKT_BYTES, pp->pkt, + pp->pkt_dma); + kfree(pp); + } + ata_port_stop(ap); +} + +static void qs_host_stop(struct ata_host_set *host_set) +{ + void __iomem *mmio_base = host_set->mmio_base; + struct pci_dev *pdev = to_pci_dev(host_set->dev); + + writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */ + writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */ + + pci_iounmap(pdev, mmio_base); +} + +static void qs_host_init(unsigned int chip_id, struct ata_probe_ent *pe) +{ + void __iomem *mmio_base = pe->mmio_base; + unsigned int port_no; + + writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */ + writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */ + + /* reset each channel in turn */ + for (port_no = 0; port_no < pe->n_ports; ++port_no) { + u8 __iomem *chan = mmio_base + (port_no * 0x4000); + writeb(QS_CTR1_RDEV|QS_CTR1_RCHN, chan + QS_CCT_CTR1); + writeb(QS_CTR0_REG, chan + QS_CCT_CTR0); + readb(chan + QS_CCT_CTR0); /* flush */ + } + writeb(QS_SERD3_PHY_ENA, mmio_base + QS_HVS_SERD3); /* enable phy */ + + for (port_no = 0; port_no < pe->n_ports; ++port_no) { + u8 __iomem *chan = mmio_base + (port_no * 0x4000); + /* set FIFO depths to same settings as Windows driver */ + writew(32, chan + QS_CFC_HUFT); + writew(32, chan + QS_CFC_HDFT); + writew(10, chan + QS_CFC_DUFT); + writew( 8, chan + QS_CFC_DDFT); + /* set CPB size in bytes, as a power of two */ + writeb(QS_CPB_ORDER, chan + QS_CCF_CSEP); + } + writeb(1, mmio_base + QS_HCT_CTRL); /* enable host interrupts */ +} + +/* + * The QStor understands 64-bit buses, and uses 64-bit fields + * for DMA pointers regardless of bus width. We just have to + * make sure our DMA masks are set appropriately for whatever + * bridge lies between us and the QStor, and then the DMA mapping + * code will ensure we only ever "see" appropriate buffer addresses. + * If we're 32-bit limited somewhere, then our 64-bit fields will + * just end up with zeros in the upper 32-bits, without any special + * logic required outside of this routine (below). + */ +static int qs_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base) +{ + u32 bus_info = readl(mmio_base + QS_HID_HPHY); + int rc, have_64bit_bus = (bus_info & QS_HPHY_64BIT); + + if (have_64bit_bus && + !pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { + rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); + if (rc) { + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "64-bit DMA enable failed\n"); + return rc; + } + } + } else { + rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "32-bit DMA enable failed\n"); + return rc; + } + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "32-bit consistent DMA enable failed\n"); + return rc; + } + } + return 0; +} + +static int qs_ata_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + static int printed_version; + struct ata_probe_ent *probe_ent = NULL; + void __iomem *mmio_base; + unsigned int board_idx = (unsigned int) ent->driver_data; + int rc, port_no; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) + goto err_out; + + if ((pci_resource_flags(pdev, 4) & IORESOURCE_MEM) == 0) { + rc = -ENODEV; + goto err_out_regions; + } + + mmio_base = pci_iomap(pdev, 4, 0); + if (mmio_base == NULL) { + rc = -ENOMEM; + goto err_out_regions; + } + + rc = qs_set_dma_masks(pdev, mmio_base); + if (rc) + goto err_out_iounmap; + + probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); + if (probe_ent == NULL) { + rc = -ENOMEM; + goto err_out_iounmap; + } + + memset(probe_ent, 0, sizeof(*probe_ent)); + probe_ent->dev = pci_dev_to_dev(pdev); + INIT_LIST_HEAD(&probe_ent->node); + + probe_ent->sht = qs_port_info[board_idx].sht; + probe_ent->host_flags = qs_port_info[board_idx].host_flags; + probe_ent->pio_mask = qs_port_info[board_idx].pio_mask; + probe_ent->mwdma_mask = qs_port_info[board_idx].mwdma_mask; + probe_ent->udma_mask = qs_port_info[board_idx].udma_mask; + probe_ent->port_ops = qs_port_info[board_idx].port_ops; + + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = IRQF_SHARED; + probe_ent->mmio_base = mmio_base; + probe_ent->n_ports = QS_PORTS; + + for (port_no = 0; port_no < probe_ent->n_ports; ++port_no) { + unsigned long chan = (unsigned long)mmio_base + + (port_no * 0x4000); + qs_ata_setup_port(&probe_ent->port[port_no], chan); + } + + pci_set_master(pdev); + + /* initialize adapter */ + qs_host_init(board_idx, probe_ent); + + rc = ata_device_add(probe_ent); + kfree(probe_ent); + if (rc != QS_PORTS) + goto err_out_iounmap; + return 0; + +err_out_iounmap: + pci_iounmap(pdev, mmio_base); +err_out_regions: + pci_release_regions(pdev); +err_out: + pci_disable_device(pdev); + return rc; +} + +static int __init qs_ata_init(void) +{ + return pci_register_driver(&qs_ata_pci_driver); +} + +static void __exit qs_ata_exit(void) +{ + pci_unregister_driver(&qs_ata_pci_driver); +} + +MODULE_AUTHOR("Mark Lord"); +MODULE_DESCRIPTION("Pacific Digital Corporation QStor SATA low-level driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, qs_ata_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +module_init(qs_ata_init); +module_exit(qs_ata_exit); diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c new file mode 100644 index 00000000000..907faa87239 --- /dev/null +++ b/drivers/ata/sata_sil.c @@ -0,0 +1,723 @@ +/* + * sata_sil.c - Silicon Image SATA + * + * Maintained by: Jeff Garzik + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003-2005 Red Hat, Inc. + * Copyright 2003 Benjamin Herrenschmidt + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Documentation for SiI 3112: + * http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2 + * + * Other errata and documentation available under NDA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "sata_sil" +#define DRV_VERSION "2.0" + +enum { + /* + * host flags + */ + SIL_FLAG_NO_SATA_IRQ = (1 << 28), + SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29), + SIL_FLAG_MOD15WRITE = (1 << 30), + + SIL_DFL_HOST_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO | ATA_FLAG_HRST_TO_RESUME, + + /* + * Controller IDs + */ + sil_3112 = 0, + sil_3112_no_sata_irq = 1, + sil_3512 = 2, + sil_3114 = 3, + + /* + * Register offsets + */ + SIL_SYSCFG = 0x48, + + /* + * Register bits + */ + /* SYSCFG */ + SIL_MASK_IDE0_INT = (1 << 22), + SIL_MASK_IDE1_INT = (1 << 23), + SIL_MASK_IDE2_INT = (1 << 24), + SIL_MASK_IDE3_INT = (1 << 25), + SIL_MASK_2PORT = SIL_MASK_IDE0_INT | SIL_MASK_IDE1_INT, + SIL_MASK_4PORT = SIL_MASK_2PORT | + SIL_MASK_IDE2_INT | SIL_MASK_IDE3_INT, + + /* BMDMA/BMDMA2 */ + SIL_INTR_STEERING = (1 << 1), + + SIL_DMA_ENABLE = (1 << 0), /* DMA run switch */ + SIL_DMA_RDWR = (1 << 3), /* DMA Rd-Wr */ + SIL_DMA_SATA_IRQ = (1 << 4), /* OR of all SATA IRQs */ + SIL_DMA_ACTIVE = (1 << 16), /* DMA running */ + SIL_DMA_ERROR = (1 << 17), /* PCI bus error */ + SIL_DMA_COMPLETE = (1 << 18), /* cmd complete / IRQ pending */ + SIL_DMA_N_SATA_IRQ = (1 << 6), /* SATA_IRQ for the next channel */ + SIL_DMA_N_ACTIVE = (1 << 24), /* ACTIVE for the next channel */ + SIL_DMA_N_ERROR = (1 << 25), /* ERROR for the next channel */ + SIL_DMA_N_COMPLETE = (1 << 26), /* COMPLETE for the next channel */ + + /* SIEN */ + SIL_SIEN_N = (1 << 16), /* triggered by SError.N */ + + /* + * Others + */ + SIL_QUIRK_MOD15WRITE = (1 << 0), + SIL_QUIRK_UDMA5MAX = (1 << 1), +}; + +static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); +static int sil_pci_device_resume(struct pci_dev *pdev); +static void sil_dev_config(struct ata_port *ap, struct ata_device *dev); +static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg); +static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); +static void sil_post_set_mode (struct ata_port *ap); +static irqreturn_t sil_interrupt(int irq, void *dev_instance, + struct pt_regs *regs); +static void sil_freeze(struct ata_port *ap); +static void sil_thaw(struct ata_port *ap); + + +static const struct pci_device_id sil_pci_tbl[] = { + { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3512 }, + { 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 }, + { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_no_sata_irq }, + { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_no_sata_irq }, + { } /* terminate list */ +}; + + +/* TODO firmware versions should be added - eric */ +static const struct sil_drivelist { + const char * product; + unsigned int quirk; +} sil_blacklist [] = { + { "ST320012AS", SIL_QUIRK_MOD15WRITE }, + { "ST330013AS", SIL_QUIRK_MOD15WRITE }, + { "ST340017AS", SIL_QUIRK_MOD15WRITE }, + { "ST360015AS", SIL_QUIRK_MOD15WRITE }, + { "ST380023AS", SIL_QUIRK_MOD15WRITE }, + { "ST3120023AS", SIL_QUIRK_MOD15WRITE }, + { "ST340014ASL", SIL_QUIRK_MOD15WRITE }, + { "ST360014ASL", SIL_QUIRK_MOD15WRITE }, + { "ST380011ASL", SIL_QUIRK_MOD15WRITE }, + { "ST3120022ASL", SIL_QUIRK_MOD15WRITE }, + { "ST3160021ASL", SIL_QUIRK_MOD15WRITE }, + { "Maxtor 4D060H3", SIL_QUIRK_UDMA5MAX }, + { } +}; + +static struct pci_driver sil_pci_driver = { + .name = DRV_NAME, + .id_table = sil_pci_tbl, + .probe = sil_init_one, + .remove = ata_pci_remove_one, + .suspend = ata_pci_device_suspend, + .resume = sil_pci_device_resume, +}; + +static struct scsi_host_template sil_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, + .suspend = ata_scsi_device_suspend, + .resume = ata_scsi_device_resume, +}; + +static const struct ata_port_operations sil_ops = { + .port_disable = ata_port_disable, + .dev_config = sil_dev_config, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + .post_set_mode = sil_post_set_mode, + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_mmio_data_xfer, + .freeze = sil_freeze, + .thaw = sil_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .irq_handler = sil_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .scr_read = sil_scr_read, + .scr_write = sil_scr_write, + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_pci_host_stop, +}; + +static const struct ata_port_info sil_port_info[] = { + /* sil_3112 */ + { + .sht = &sil_sht, + .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_MOD15WRITE, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil_ops, + }, + /* sil_3112_no_sata_irq */ + { + .sht = &sil_sht, + .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_MOD15WRITE | + SIL_FLAG_NO_SATA_IRQ, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil_ops, + }, + /* sil_3512 */ + { + .sht = &sil_sht, + .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil_ops, + }, + /* sil_3114 */ + { + .sht = &sil_sht, + .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil_ops, + }, +}; + +/* per-port register offsets */ +/* TODO: we can probably calculate rather than use a table */ +static const struct { + unsigned long tf; /* ATA taskfile register block */ + unsigned long ctl; /* ATA control/altstatus register block */ + unsigned long bmdma; /* DMA register block */ + unsigned long bmdma2; /* DMA register block #2 */ + unsigned long fifo_cfg; /* FIFO Valid Byte Count and Control */ + unsigned long scr; /* SATA control register block */ + unsigned long sien; /* SATA Interrupt Enable register */ + unsigned long xfer_mode;/* data transfer mode register */ + unsigned long sfis_cfg; /* SATA FIS reception config register */ +} sil_port[] = { + /* port 0 ... */ + { 0x80, 0x8A, 0x00, 0x10, 0x40, 0x100, 0x148, 0xb4, 0x14c }, + { 0xC0, 0xCA, 0x08, 0x18, 0x44, 0x180, 0x1c8, 0xf4, 0x1cc }, + { 0x280, 0x28A, 0x200, 0x210, 0x240, 0x300, 0x348, 0x2b4, 0x34c }, + { 0x2C0, 0x2CA, 0x208, 0x218, 0x244, 0x380, 0x3c8, 0x2f4, 0x3cc }, + /* ... port 3 */ +}; + +MODULE_AUTHOR("Jeff Garzik"); +MODULE_DESCRIPTION("low-level driver for Silicon Image SATA controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sil_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +static int slow_down = 0; +module_param(slow_down, int, 0444); +MODULE_PARM_DESC(slow_down, "Sledgehammer used to work around random problems, by limiting commands to 15 sectors (0=off, 1=on)"); + + +static unsigned char sil_get_device_cache_line(struct pci_dev *pdev) +{ + u8 cache_line = 0; + pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache_line); + return cache_line; +} + +static void sil_post_set_mode (struct ata_port *ap) +{ + struct ata_host_set *host_set = ap->host_set; + struct ata_device *dev; + void __iomem *addr = + host_set->mmio_base + sil_port[ap->port_no].xfer_mode; + u32 tmp, dev_mode[2]; + unsigned int i; + + for (i = 0; i < 2; i++) { + dev = &ap->device[i]; + if (!ata_dev_enabled(dev)) + dev_mode[i] = 0; /* PIO0/1/2 */ + else if (dev->flags & ATA_DFLAG_PIO) + dev_mode[i] = 1; /* PIO3/4 */ + else + dev_mode[i] = 3; /* UDMA */ + /* value 2 indicates MDMA */ + } + + tmp = readl(addr); + tmp &= ~((1<<5) | (1<<4) | (1<<1) | (1<<0)); + tmp |= dev_mode[0]; + tmp |= (dev_mode[1] << 4); + writel(tmp, addr); + readl(addr); /* flush */ +} + +static inline unsigned long sil_scr_addr(struct ata_port *ap, unsigned int sc_reg) +{ + unsigned long offset = ap->ioaddr.scr_addr; + + switch (sc_reg) { + case SCR_STATUS: + return offset + 4; + case SCR_ERROR: + return offset + 8; + case SCR_CONTROL: + return offset; + default: + /* do nothing */ + break; + } + + return 0; +} + +static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg) +{ + void __iomem *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg); + if (mmio) + return readl(mmio); + return 0xffffffffU; +} + +static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) +{ + void *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg); + if (mmio) + writel(val, mmio); +} + +static void sil_host_intr(struct ata_port *ap, u32 bmdma2) +{ + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); + u8 status; + + if (unlikely(bmdma2 & SIL_DMA_SATA_IRQ)) { + u32 serror; + + /* SIEN doesn't mask SATA IRQs on some 3112s. Those + * controllers continue to assert IRQ as long as + * SError bits are pending. Clear SError immediately. + */ + serror = sil_scr_read(ap, SCR_ERROR); + sil_scr_write(ap, SCR_ERROR, serror); + + /* Trigger hotplug and accumulate SError only if the + * port isn't already frozen. Otherwise, PHY events + * during hardreset makes controllers with broken SIEN + * repeat probing needlessly. + */ + if (!(ap->pflags & ATA_PFLAG_FROZEN)) { + ata_ehi_hotplugged(&ap->eh_info); + ap->eh_info.serror |= serror; + } + + goto freeze; + } + + if (unlikely(!qc || qc->tf.ctl & ATA_NIEN)) + goto freeze; + + /* Check whether we are expecting interrupt in this state */ + switch (ap->hsm_task_state) { + case HSM_ST_FIRST: + /* Some pre-ATAPI-4 devices assert INTRQ + * at this state when ready to receive CDB. + */ + + /* Check the ATA_DFLAG_CDB_INTR flag is enough here. + * The flag was turned on only for atapi devices. + * No need to check is_atapi_taskfile(&qc->tf) again. + */ + if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) + goto err_hsm; + break; + case HSM_ST_LAST: + if (qc->tf.protocol == ATA_PROT_DMA || + qc->tf.protocol == ATA_PROT_ATAPI_DMA) { + /* clear DMA-Start bit */ + ap->ops->bmdma_stop(qc); + + if (bmdma2 & SIL_DMA_ERROR) { + qc->err_mask |= AC_ERR_HOST_BUS; + ap->hsm_task_state = HSM_ST_ERR; + } + } + break; + case HSM_ST: + break; + default: + goto err_hsm; + } + + /* check main status, clearing INTRQ */ + status = ata_chk_status(ap); + if (unlikely(status & ATA_BUSY)) + goto err_hsm; + + /* ack bmdma irq events */ + ata_bmdma_irq_clear(ap); + + /* kick HSM in the ass */ + ata_hsm_move(ap, qc, status, 0); + + return; + + err_hsm: + qc->err_mask |= AC_ERR_HSM; + freeze: + ata_port_freeze(ap); +} + +static irqreturn_t sil_interrupt(int irq, void *dev_instance, + struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + void __iomem *mmio_base = host_set->mmio_base; + int handled = 0; + int i; + + spin_lock(&host_set->lock); + + for (i = 0; i < host_set->n_ports; i++) { + struct ata_port *ap = host_set->ports[i]; + u32 bmdma2 = readl(mmio_base + sil_port[ap->port_no].bmdma2); + + if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED)) + continue; + + /* turn off SATA_IRQ if not supported */ + if (ap->flags & SIL_FLAG_NO_SATA_IRQ) + bmdma2 &= ~SIL_DMA_SATA_IRQ; + + if (bmdma2 == 0xffffffff || + !(bmdma2 & (SIL_DMA_COMPLETE | SIL_DMA_SATA_IRQ))) + continue; + + sil_host_intr(ap, bmdma2); + handled = 1; + } + + spin_unlock(&host_set->lock); + + return IRQ_RETVAL(handled); +} + +static void sil_freeze(struct ata_port *ap) +{ + void __iomem *mmio_base = ap->host_set->mmio_base; + u32 tmp; + + /* global IRQ mask doesn't block SATA IRQ, turn off explicitly */ + writel(0, mmio_base + sil_port[ap->port_no].sien); + + /* plug IRQ */ + tmp = readl(mmio_base + SIL_SYSCFG); + tmp |= SIL_MASK_IDE0_INT << ap->port_no; + writel(tmp, mmio_base + SIL_SYSCFG); + readl(mmio_base + SIL_SYSCFG); /* flush */ +} + +static void sil_thaw(struct ata_port *ap) +{ + void __iomem *mmio_base = ap->host_set->mmio_base; + u32 tmp; + + /* clear IRQ */ + ata_chk_status(ap); + ata_bmdma_irq_clear(ap); + + /* turn on SATA IRQ if supported */ + if (!(ap->flags & SIL_FLAG_NO_SATA_IRQ)) + writel(SIL_SIEN_N, mmio_base + sil_port[ap->port_no].sien); + + /* turn on IRQ */ + tmp = readl(mmio_base + SIL_SYSCFG); + tmp &= ~(SIL_MASK_IDE0_INT << ap->port_no); + writel(tmp, mmio_base + SIL_SYSCFG); +} + +/** + * sil_dev_config - Apply device/host-specific errata fixups + * @ap: Port containing device to be examined + * @dev: Device to be examined + * + * After the IDENTIFY [PACKET] DEVICE step is complete, and a + * device is known to be present, this function is called. + * We apply two errata fixups which are specific to Silicon Image, + * a Seagate and a Maxtor fixup. + * + * For certain Seagate devices, we must limit the maximum sectors + * to under 8K. + * + * For certain Maxtor devices, we must not program the drive + * beyond udma5. + * + * Both fixups are unfairly pessimistic. As soon as I get more + * information on these errata, I will create a more exhaustive + * list, and apply the fixups to only the specific + * devices/hosts/firmwares that need it. + * + * 20040111 - Seagate drives affected by the Mod15Write bug are blacklisted + * The Maxtor quirk is in the blacklist, but I'm keeping the original + * pessimistic fix for the following reasons... + * - There seems to be less info on it, only one device gleaned off the + * Windows driver, maybe only one is affected. More info would be greatly + * appreciated. + * - But then again UDMA5 is hardly anything to complain about + */ +static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) +{ + unsigned int n, quirks = 0; + unsigned char model_num[41]; + + ata_id_c_string(dev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num)); + + for (n = 0; sil_blacklist[n].product; n++) + if (!strcmp(sil_blacklist[n].product, model_num)) { + quirks = sil_blacklist[n].quirk; + break; + } + + /* limit requests to 15 sectors */ + if (slow_down || + ((ap->flags & SIL_FLAG_MOD15WRITE) && + (quirks & SIL_QUIRK_MOD15WRITE))) { + ata_dev_printk(dev, KERN_INFO, "applying Seagate errata fix " + "(mod15write workaround)\n"); + dev->max_sectors = 15; + return; + } + + /* limit to udma5 */ + if (quirks & SIL_QUIRK_UDMA5MAX) { + ata_dev_printk(dev, KERN_INFO, + "applying Maxtor errata fix %s\n", model_num); + dev->udma_mask &= ATA_UDMA5; + return; + } +} + +static void sil_init_controller(struct pci_dev *pdev, + int n_ports, unsigned long host_flags, + void __iomem *mmio_base) +{ + u8 cls; + u32 tmp; + int i; + + /* Initialize FIFO PCI bus arbitration */ + cls = sil_get_device_cache_line(pdev); + if (cls) { + cls >>= 3; + cls++; /* cls = (line_size/8)+1 */ + for (i = 0; i < n_ports; i++) + writew(cls << 8 | cls, + mmio_base + sil_port[i].fifo_cfg); + } else + dev_printk(KERN_WARNING, &pdev->dev, + "cache line size not set. Driver may not function\n"); + + /* Apply R_ERR on DMA activate FIS errata workaround */ + if (host_flags & SIL_FLAG_RERR_ON_DMA_ACT) { + int cnt; + + for (i = 0, cnt = 0; i < n_ports; i++) { + tmp = readl(mmio_base + sil_port[i].sfis_cfg); + if ((tmp & 0x3) != 0x01) + continue; + if (!cnt) + dev_printk(KERN_INFO, &pdev->dev, + "Applying R_ERR on DMA activate " + "FIS errata fix\n"); + writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg); + cnt++; + } + } + + if (n_ports == 4) { + /* flip the magic "make 4 ports work" bit */ + tmp = readl(mmio_base + sil_port[2].bmdma); + if ((tmp & SIL_INTR_STEERING) == 0) + writel(tmp | SIL_INTR_STEERING, + mmio_base + sil_port[2].bmdma); + } +} + +static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + struct ata_probe_ent *probe_ent = NULL; + unsigned long base; + void __iomem *mmio_base; + int rc; + unsigned int i; + int pci_dev_busy = 0; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) { + pci_dev_busy = 1; + goto err_out; + } + + rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + + probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); + if (probe_ent == NULL) { + rc = -ENOMEM; + goto err_out_regions; + } + + INIT_LIST_HEAD(&probe_ent->node); + probe_ent->dev = pci_dev_to_dev(pdev); + probe_ent->port_ops = sil_port_info[ent->driver_data].port_ops; + probe_ent->sht = sil_port_info[ent->driver_data].sht; + probe_ent->n_ports = (ent->driver_data == sil_3114) ? 4 : 2; + probe_ent->pio_mask = sil_port_info[ent->driver_data].pio_mask; + probe_ent->mwdma_mask = sil_port_info[ent->driver_data].mwdma_mask; + probe_ent->udma_mask = sil_port_info[ent->driver_data].udma_mask; + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = IRQF_SHARED; + probe_ent->host_flags = sil_port_info[ent->driver_data].host_flags; + + mmio_base = pci_iomap(pdev, 5, 0); + if (mmio_base == NULL) { + rc = -ENOMEM; + goto err_out_free_ent; + } + + probe_ent->mmio_base = mmio_base; + + base = (unsigned long) mmio_base; + + for (i = 0; i < probe_ent->n_ports; i++) { + probe_ent->port[i].cmd_addr = base + sil_port[i].tf; + probe_ent->port[i].altstatus_addr = + probe_ent->port[i].ctl_addr = base + sil_port[i].ctl; + probe_ent->port[i].bmdma_addr = base + sil_port[i].bmdma; + probe_ent->port[i].scr_addr = base + sil_port[i].scr; + ata_std_ports(&probe_ent->port[i]); + } + + sil_init_controller(pdev, probe_ent->n_ports, probe_ent->host_flags, + mmio_base); + + pci_set_master(pdev); + + /* FIXME: check ata_device_add return value */ + ata_device_add(probe_ent); + kfree(probe_ent); + + return 0; + +err_out_free_ent: + kfree(probe_ent); +err_out_regions: + pci_release_regions(pdev); +err_out: + if (!pci_dev_busy) + pci_disable_device(pdev); + return rc; +} + +static int sil_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); + + ata_pci_device_do_resume(pdev); + sil_init_controller(pdev, host_set->n_ports, host_set->ports[0]->flags, + host_set->mmio_base); + ata_host_set_resume(host_set); + + return 0; +} + +static int __init sil_init(void) +{ + return pci_register_driver(&sil_pci_driver); +} + +static void __exit sil_exit(void) +{ + pci_unregister_driver(&sil_pci_driver); +} + + +module_init(sil_init); +module_exit(sil_exit); diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c new file mode 100644 index 00000000000..3a0161ddc33 --- /dev/null +++ b/drivers/ata/sata_sil24.c @@ -0,0 +1,1222 @@ +/* + * sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers + * + * Copyright 2005 Tejun Heo + * + * Based on preview driver from Silicon Image. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "sata_sil24" +#define DRV_VERSION "0.3" + +/* + * Port request block (PRB) 32 bytes + */ +struct sil24_prb { + __le16 ctrl; + __le16 prot; + __le32 rx_cnt; + u8 fis[6 * 4]; +}; + +/* + * Scatter gather entry (SGE) 16 bytes + */ +struct sil24_sge { + __le64 addr; + __le32 cnt; + __le32 flags; +}; + +/* + * Port multiplier + */ +struct sil24_port_multiplier { + __le32 diag; + __le32 sactive; +}; + +enum { + /* + * Global controller registers (128 bytes @ BAR0) + */ + /* 32 bit regs */ + HOST_SLOT_STAT = 0x00, /* 32 bit slot stat * 4 */ + HOST_CTRL = 0x40, + HOST_IRQ_STAT = 0x44, + HOST_PHY_CFG = 0x48, + HOST_BIST_CTRL = 0x50, + HOST_BIST_PTRN = 0x54, + HOST_BIST_STAT = 0x58, + HOST_MEM_BIST_STAT = 0x5c, + HOST_FLASH_CMD = 0x70, + /* 8 bit regs */ + HOST_FLASH_DATA = 0x74, + HOST_TRANSITION_DETECT = 0x75, + HOST_GPIO_CTRL = 0x76, + HOST_I2C_ADDR = 0x78, /* 32 bit */ + HOST_I2C_DATA = 0x7c, + HOST_I2C_XFER_CNT = 0x7e, + HOST_I2C_CTRL = 0x7f, + + /* HOST_SLOT_STAT bits */ + HOST_SSTAT_ATTN = (1 << 31), + + /* HOST_CTRL bits */ + HOST_CTRL_M66EN = (1 << 16), /* M66EN PCI bus signal */ + HOST_CTRL_TRDY = (1 << 17), /* latched PCI TRDY */ + HOST_CTRL_STOP = (1 << 18), /* latched PCI STOP */ + HOST_CTRL_DEVSEL = (1 << 19), /* latched PCI DEVSEL */ + HOST_CTRL_REQ64 = (1 << 20), /* latched PCI REQ64 */ + HOST_CTRL_GLOBAL_RST = (1 << 31), /* global reset */ + + /* + * Port registers + * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2) + */ + PORT_REGS_SIZE = 0x2000, + + PORT_LRAM = 0x0000, /* 31 LRAM slots and PM regs */ + PORT_LRAM_SLOT_SZ = 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */ + + PORT_PM = 0x0f80, /* 8 bytes PM * 16 (128 bytes) */ + /* 32 bit regs */ + PORT_CTRL_STAT = 0x1000, /* write: ctrl-set, read: stat */ + PORT_CTRL_CLR = 0x1004, /* write: ctrl-clear */ + PORT_IRQ_STAT = 0x1008, /* high: status, low: interrupt */ + PORT_IRQ_ENABLE_SET = 0x1010, /* write: enable-set */ + PORT_IRQ_ENABLE_CLR = 0x1014, /* write: enable-clear */ + PORT_ACTIVATE_UPPER_ADDR= 0x101c, + PORT_EXEC_FIFO = 0x1020, /* command execution fifo */ + PORT_CMD_ERR = 0x1024, /* command error number */ + PORT_FIS_CFG = 0x1028, + PORT_FIFO_THRES = 0x102c, + /* 16 bit regs */ + PORT_DECODE_ERR_CNT = 0x1040, + PORT_DECODE_ERR_THRESH = 0x1042, + PORT_CRC_ERR_CNT = 0x1044, + PORT_CRC_ERR_THRESH = 0x1046, + PORT_HSHK_ERR_CNT = 0x1048, + PORT_HSHK_ERR_THRESH = 0x104a, + /* 32 bit regs */ + PORT_PHY_CFG = 0x1050, + PORT_SLOT_STAT = 0x1800, + PORT_CMD_ACTIVATE = 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */ + PORT_EXEC_DIAG = 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */ + PORT_PSD_DIAG = 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */ + PORT_SCONTROL = 0x1f00, + PORT_SSTATUS = 0x1f04, + PORT_SERROR = 0x1f08, + PORT_SACTIVE = 0x1f0c, + + /* PORT_CTRL_STAT bits */ + PORT_CS_PORT_RST = (1 << 0), /* port reset */ + PORT_CS_DEV_RST = (1 << 1), /* device reset */ + PORT_CS_INIT = (1 << 2), /* port initialize */ + PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */ + PORT_CS_CDB16 = (1 << 5), /* 0=12b cdb, 1=16b cdb */ + PORT_CS_RESUME = (1 << 6), /* port resume */ + PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */ + PORT_CS_PM_EN = (1 << 13), /* port multiplier enable */ + PORT_CS_RDY = (1 << 31), /* port ready to accept commands */ + + /* PORT_IRQ_STAT/ENABLE_SET/CLR */ + /* bits[11:0] are masked */ + PORT_IRQ_COMPLETE = (1 << 0), /* command(s) completed */ + PORT_IRQ_ERROR = (1 << 1), /* command execution error */ + PORT_IRQ_PORTRDY_CHG = (1 << 2), /* port ready change */ + PORT_IRQ_PWR_CHG = (1 << 3), /* power management change */ + PORT_IRQ_PHYRDY_CHG = (1 << 4), /* PHY ready change */ + PORT_IRQ_COMWAKE = (1 << 5), /* COMWAKE received */ + PORT_IRQ_UNK_FIS = (1 << 6), /* unknown FIS received */ + PORT_IRQ_DEV_XCHG = (1 << 7), /* device exchanged */ + PORT_IRQ_8B10B = (1 << 8), /* 8b/10b decode error threshold */ + PORT_IRQ_CRC = (1 << 9), /* CRC error threshold */ + PORT_IRQ_HANDSHAKE = (1 << 10), /* handshake error threshold */ + PORT_IRQ_SDB_NOTIFY = (1 << 11), /* SDB notify received */ + + DEF_PORT_IRQ = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | + PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG | + PORT_IRQ_UNK_FIS, + + /* bits[27:16] are unmasked (raw) */ + PORT_IRQ_RAW_SHIFT = 16, + PORT_IRQ_MASKED_MASK = 0x7ff, + PORT_IRQ_RAW_MASK = (0x7ff << PORT_IRQ_RAW_SHIFT), + + /* ENABLE_SET/CLR specific, intr steering - 2 bit field */ + PORT_IRQ_STEER_SHIFT = 30, + PORT_IRQ_STEER_MASK = (3 << PORT_IRQ_STEER_SHIFT), + + /* PORT_CMD_ERR constants */ + PORT_CERR_DEV = 1, /* Error bit in D2H Register FIS */ + PORT_CERR_SDB = 2, /* Error bit in SDB FIS */ + PORT_CERR_DATA = 3, /* Error in data FIS not detected by dev */ + PORT_CERR_SEND = 4, /* Initial cmd FIS transmission failure */ + PORT_CERR_INCONSISTENT = 5, /* Protocol mismatch */ + PORT_CERR_DIRECTION = 6, /* Data direction mismatch */ + PORT_CERR_UNDERRUN = 7, /* Ran out of SGEs while writing */ + PORT_CERR_OVERRUN = 8, /* Ran out of SGEs while reading */ + PORT_CERR_PKT_PROT = 11, /* DIR invalid in 1st PIO setup of ATAPI */ + PORT_CERR_SGT_BOUNDARY = 16, /* PLD ecode 00 - SGT not on qword boundary */ + PORT_CERR_SGT_TGTABRT = 17, /* PLD ecode 01 - target abort */ + PORT_CERR_SGT_MSTABRT = 18, /* PLD ecode 10 - master abort */ + PORT_CERR_SGT_PCIPERR = 19, /* PLD ecode 11 - PCI parity err while fetching SGT */ + PORT_CERR_CMD_BOUNDARY = 24, /* ctrl[15:13] 001 - PRB not on qword boundary */ + PORT_CERR_CMD_TGTABRT = 25, /* ctrl[15:13] 010 - target abort */ + PORT_CERR_CMD_MSTABRT = 26, /* ctrl[15:13] 100 - master abort */ + PORT_CERR_CMD_PCIPERR = 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */ + PORT_CERR_XFR_UNDEF = 32, /* PSD ecode 00 - undefined */ + PORT_CERR_XFR_TGTABRT = 33, /* PSD ecode 01 - target abort */ + PORT_CERR_XFR_MSTABRT = 34, /* PSD ecode 10 - master abort */ + PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */ + PORT_CERR_SENDSERVICE = 36, /* FIS received while sending service */ + + /* bits of PRB control field */ + PRB_CTRL_PROTOCOL = (1 << 0), /* override def. ATA protocol */ + PRB_CTRL_PACKET_READ = (1 << 4), /* PACKET cmd read */ + PRB_CTRL_PACKET_WRITE = (1 << 5), /* PACKET cmd write */ + PRB_CTRL_NIEN = (1 << 6), /* Mask completion irq */ + PRB_CTRL_SRST = (1 << 7), /* Soft reset request (ign BSY?) */ + + /* PRB protocol field */ + PRB_PROT_PACKET = (1 << 0), + PRB_PROT_TCQ = (1 << 1), + PRB_PROT_NCQ = (1 << 2), + PRB_PROT_READ = (1 << 3), + PRB_PROT_WRITE = (1 << 4), + PRB_PROT_TRANSPARENT = (1 << 5), + + /* + * Other constants + */ + SGE_TRM = (1 << 31), /* Last SGE in chain */ + SGE_LNK = (1 << 30), /* linked list + Points to SGT, not SGE */ + SGE_DRD = (1 << 29), /* discard data read (/dev/null) + data address ignored */ + + SIL24_MAX_CMDS = 31, + + /* board id */ + BID_SIL3124 = 0, + BID_SIL3132 = 1, + BID_SIL3131 = 2, + + /* host flags */ + SIL24_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | + ATA_FLAG_NCQ | ATA_FLAG_SKIP_D2H_BSY, + SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */ + + IRQ_STAT_4PORTS = 0xf, +}; + +struct sil24_ata_block { + struct sil24_prb prb; + struct sil24_sge sge[LIBATA_MAX_PRD]; +}; + +struct sil24_atapi_block { + struct sil24_prb prb; + u8 cdb[16]; + struct sil24_sge sge[LIBATA_MAX_PRD - 1]; +}; + +union sil24_cmd_block { + struct sil24_ata_block ata; + struct sil24_atapi_block atapi; +}; + +static struct sil24_cerr_info { + unsigned int err_mask, action; + const char *desc; +} sil24_cerr_db[] = { + [0] = { AC_ERR_DEV, ATA_EH_REVALIDATE, + "device error" }, + [PORT_CERR_DEV] = { AC_ERR_DEV, ATA_EH_REVALIDATE, + "device error via D2H FIS" }, + [PORT_CERR_SDB] = { AC_ERR_DEV, ATA_EH_REVALIDATE, + "device error via SDB FIS" }, + [PORT_CERR_DATA] = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET, + "error in data FIS" }, + [PORT_CERR_SEND] = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET, + "failed to transmit command FIS" }, + [PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_SOFTRESET, + "protocol mismatch" }, + [PORT_CERR_DIRECTION] = { AC_ERR_HSM, ATA_EH_SOFTRESET, + "data directon mismatch" }, + [PORT_CERR_UNDERRUN] = { AC_ERR_HSM, ATA_EH_SOFTRESET, + "ran out of SGEs while writing" }, + [PORT_CERR_OVERRUN] = { AC_ERR_HSM, ATA_EH_SOFTRESET, + "ran out of SGEs while reading" }, + [PORT_CERR_PKT_PROT] = { AC_ERR_HSM, ATA_EH_SOFTRESET, + "invalid data directon for ATAPI CDB" }, + [PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET, + "SGT no on qword boundary" }, + [PORT_CERR_SGT_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI target abort while fetching SGT" }, + [PORT_CERR_SGT_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI master abort while fetching SGT" }, + [PORT_CERR_SGT_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI parity error while fetching SGT" }, + [PORT_CERR_CMD_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET, + "PRB not on qword boundary" }, + [PORT_CERR_CMD_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI target abort while fetching PRB" }, + [PORT_CERR_CMD_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI master abort while fetching PRB" }, + [PORT_CERR_CMD_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI parity error while fetching PRB" }, + [PORT_CERR_XFR_UNDEF] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "undefined error while transferring data" }, + [PORT_CERR_XFR_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI target abort while transferring data" }, + [PORT_CERR_XFR_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI master abort while transferring data" }, + [PORT_CERR_XFR_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI parity error while transferring data" }, + [PORT_CERR_SENDSERVICE] = { AC_ERR_HSM, ATA_EH_SOFTRESET, + "FIS received while sending service FIS" }, +}; + +/* + * ap->private_data + * + * The preview driver always returned 0 for status. We emulate it + * here from the previous interrupt. + */ +struct sil24_port_priv { + union sil24_cmd_block *cmd_block; /* 32 cmd blocks */ + dma_addr_t cmd_block_dma; /* DMA base addr for them */ + struct ata_taskfile tf; /* Cached taskfile registers */ +}; + +/* ap->host_set->private_data */ +struct sil24_host_priv { + void __iomem *host_base; /* global controller control (128 bytes @BAR0) */ + void __iomem *port_base; /* port registers (4 * 8192 bytes @BAR2) */ +}; + +static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev); +static u8 sil24_check_status(struct ata_port *ap); +static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg); +static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val); +static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf); +static void sil24_qc_prep(struct ata_queued_cmd *qc); +static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc); +static void sil24_irq_clear(struct ata_port *ap); +static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs); +static void sil24_freeze(struct ata_port *ap); +static void sil24_thaw(struct ata_port *ap); +static void sil24_error_handler(struct ata_port *ap); +static void sil24_post_internal_cmd(struct ata_queued_cmd *qc); +static int sil24_port_start(struct ata_port *ap); +static void sil24_port_stop(struct ata_port *ap); +static void sil24_host_stop(struct ata_host_set *host_set); +static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +static int sil24_pci_device_resume(struct pci_dev *pdev); + +static const struct pci_device_id sil24_pci_tbl[] = { + { 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 }, + { 0x8086, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 }, + { 0x1095, 0x3132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3132 }, + { 0x1095, 0x3131, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 }, + { 0x1095, 0x3531, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 }, + { } /* terminate list */ +}; + +static struct pci_driver sil24_pci_driver = { + .name = DRV_NAME, + .id_table = sil24_pci_tbl, + .probe = sil24_init_one, + .remove = ata_pci_remove_one, /* safe? */ + .suspend = ata_pci_device_suspend, + .resume = sil24_pci_device_resume, +}; + +static struct scsi_host_template sil24_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .change_queue_depth = ata_scsi_change_queue_depth, + .can_queue = SIL24_MAX_CMDS, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, + .suspend = ata_scsi_device_suspend, + .resume = ata_scsi_device_resume, +}; + +static const struct ata_port_operations sil24_ops = { + .port_disable = ata_port_disable, + + .dev_config = sil24_dev_config, + + .check_status = sil24_check_status, + .check_altstatus = sil24_check_status, + .dev_select = ata_noop_dev_select, + + .tf_read = sil24_tf_read, + + .qc_prep = sil24_qc_prep, + .qc_issue = sil24_qc_issue, + + .irq_handler = sil24_interrupt, + .irq_clear = sil24_irq_clear, + + .scr_read = sil24_scr_read, + .scr_write = sil24_scr_write, + + .freeze = sil24_freeze, + .thaw = sil24_thaw, + .error_handler = sil24_error_handler, + .post_internal_cmd = sil24_post_internal_cmd, + + .port_start = sil24_port_start, + .port_stop = sil24_port_stop, + .host_stop = sil24_host_stop, +}; + +/* + * Use bits 30-31 of host_flags to encode available port numbers. + * Current maxium is 4. + */ +#define SIL24_NPORTS2FLAG(nports) ((((unsigned)(nports) - 1) & 0x3) << 30) +#define SIL24_FLAG2NPORTS(flag) ((((flag) >> 30) & 0x3) + 1) + +static struct ata_port_info sil24_port_info[] = { + /* sil_3124 */ + { + .sht = &sil24_sht, + .host_flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) | + SIL24_FLAG_PCIX_IRQ_WOC, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil24_ops, + }, + /* sil_3132 */ + { + .sht = &sil24_sht, + .host_flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2), + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil24_ops, + }, + /* sil_3131/sil_3531 */ + { + .sht = &sil24_sht, + .host_flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1), + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil24_ops, + }, +}; + +static int sil24_tag(int tag) +{ + if (unlikely(ata_tag_internal(tag))) + return 0; + return tag; +} + +static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev) +{ + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + + if (dev->cdb_len == 16) + writel(PORT_CS_CDB16, port + PORT_CTRL_STAT); + else + writel(PORT_CS_CDB16, port + PORT_CTRL_CLR); +} + +static inline void sil24_update_tf(struct ata_port *ap) +{ + struct sil24_port_priv *pp = ap->private_data; + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + struct sil24_prb __iomem *prb = port; + u8 fis[6 * 4]; + + memcpy_fromio(fis, prb->fis, 6 * 4); + ata_tf_from_fis(fis, &pp->tf); +} + +static u8 sil24_check_status(struct ata_port *ap) +{ + struct sil24_port_priv *pp = ap->private_data; + return pp->tf.command; +} + +static int sil24_scr_map[] = { + [SCR_CONTROL] = 0, + [SCR_STATUS] = 1, + [SCR_ERROR] = 2, + [SCR_ACTIVE] = 3, +}; + +static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg) +{ + void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr; + if (sc_reg < ARRAY_SIZE(sil24_scr_map)) { + void __iomem *addr; + addr = scr_addr + sil24_scr_map[sc_reg] * 4; + return readl(scr_addr + sil24_scr_map[sc_reg] * 4); + } + return 0xffffffffU; +} + +static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val) +{ + void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr; + if (sc_reg < ARRAY_SIZE(sil24_scr_map)) { + void __iomem *addr; + addr = scr_addr + sil24_scr_map[sc_reg] * 4; + writel(val, scr_addr + sil24_scr_map[sc_reg] * 4); + } +} + +static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct sil24_port_priv *pp = ap->private_data; + *tf = pp->tf; +} + +static int sil24_init_port(struct ata_port *ap) +{ + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + u32 tmp; + + writel(PORT_CS_INIT, port + PORT_CTRL_STAT); + ata_wait_register(port + PORT_CTRL_STAT, + PORT_CS_INIT, PORT_CS_INIT, 10, 100); + tmp = ata_wait_register(port + PORT_CTRL_STAT, + PORT_CS_RDY, 0, 10, 100); + + if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY) + return -EIO; + return 0; +} + +static int sil24_softreset(struct ata_port *ap, unsigned int *class) +{ + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + struct sil24_port_priv *pp = ap->private_data; + struct sil24_prb *prb = &pp->cmd_block[0].ata.prb; + dma_addr_t paddr = pp->cmd_block_dma; + u32 mask, irq_stat; + const char *reason; + + DPRINTK("ENTER\n"); + + if (ata_port_offline(ap)) { + DPRINTK("PHY reports no device\n"); + *class = ATA_DEV_NONE; + goto out; + } + + /* put the port into known state */ + if (sil24_init_port(ap)) { + reason ="port not ready"; + goto err; + } + + /* do SRST */ + prb->ctrl = cpu_to_le16(PRB_CTRL_SRST); + prb->fis[1] = 0; /* no PM yet */ + + writel((u32)paddr, port + PORT_CMD_ACTIVATE); + writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4); + + mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT; + irq_stat = ata_wait_register(port + PORT_IRQ_STAT, mask, 0x0, + 100, ATA_TMOUT_BOOT / HZ * 1000); + + writel(irq_stat, port + PORT_IRQ_STAT); /* clear IRQs */ + irq_stat >>= PORT_IRQ_RAW_SHIFT; + + if (!(irq_stat & PORT_IRQ_COMPLETE)) { + if (irq_stat & PORT_IRQ_ERROR) + reason = "SRST command error"; + else + reason = "timeout"; + goto err; + } + + sil24_update_tf(ap); + *class = ata_dev_classify(&pp->tf); + + if (*class == ATA_DEV_UNKNOWN) + *class = ATA_DEV_NONE; + + out: + DPRINTK("EXIT, class=%u\n", *class); + return 0; + + err: + ata_port_printk(ap, KERN_ERR, "softreset failed (%s)\n", reason); + return -EIO; +} + +static int sil24_hardreset(struct ata_port *ap, unsigned int *class) +{ + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + const char *reason; + int tout_msec, rc; + u32 tmp; + + /* sil24 does the right thing(tm) without any protection */ + sata_set_spd(ap); + + tout_msec = 100; + if (ata_port_online(ap)) + tout_msec = 5000; + + writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT); + tmp = ata_wait_register(port + PORT_CTRL_STAT, + PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10, tout_msec); + + /* SStatus oscillates between zero and valid status after + * DEV_RST, debounce it. + */ + rc = sata_phy_debounce(ap, sata_deb_timing_long); + if (rc) { + reason = "PHY debouncing failed"; + goto err; + } + + if (tmp & PORT_CS_DEV_RST) { + if (ata_port_offline(ap)) + return 0; + reason = "link not ready"; + goto err; + } + + /* Sil24 doesn't store signature FIS after hardreset, so we + * can't wait for BSY to clear. Some devices take a long time + * to get ready and those devices will choke if we don't wait + * for BSY clearance here. Tell libata to perform follow-up + * softreset. + */ + return -EAGAIN; + + err: + ata_port_printk(ap, KERN_ERR, "hardreset failed (%s)\n", reason); + return -EIO; +} + +static inline void sil24_fill_sg(struct ata_queued_cmd *qc, + struct sil24_sge *sge) +{ + struct scatterlist *sg; + unsigned int idx = 0; + + ata_for_each_sg(sg, qc) { + sge->addr = cpu_to_le64(sg_dma_address(sg)); + sge->cnt = cpu_to_le32(sg_dma_len(sg)); + if (ata_sg_is_last(sg, qc)) + sge->flags = cpu_to_le32(SGE_TRM); + else + sge->flags = 0; + + sge++; + idx++; + } +} + +static void sil24_qc_prep(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct sil24_port_priv *pp = ap->private_data; + union sil24_cmd_block *cb; + struct sil24_prb *prb; + struct sil24_sge *sge; + u16 ctrl = 0; + + cb = &pp->cmd_block[sil24_tag(qc->tag)]; + + switch (qc->tf.protocol) { + case ATA_PROT_PIO: + case ATA_PROT_DMA: + case ATA_PROT_NCQ: + case ATA_PROT_NODATA: + prb = &cb->ata.prb; + sge = cb->ata.sge; + break; + + case ATA_PROT_ATAPI: + case ATA_PROT_ATAPI_DMA: + case ATA_PROT_ATAPI_NODATA: + prb = &cb->atapi.prb; + sge = cb->atapi.sge; + memset(cb->atapi.cdb, 0, 32); + memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len); + + if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) { + if (qc->tf.flags & ATA_TFLAG_WRITE) + ctrl = PRB_CTRL_PACKET_WRITE; + else + ctrl = PRB_CTRL_PACKET_READ; + } + break; + + default: + prb = NULL; /* shut up, gcc */ + sge = NULL; + BUG(); + } + + prb->ctrl = cpu_to_le16(ctrl); + ata_tf_to_fis(&qc->tf, prb->fis, 0); + + if (qc->flags & ATA_QCFLAG_DMAMAP) + sil24_fill_sg(qc, sge); +} + +static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct sil24_port_priv *pp = ap->private_data; + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + unsigned int tag = sil24_tag(qc->tag); + dma_addr_t paddr; + void __iomem *activate; + + paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block); + activate = port + PORT_CMD_ACTIVATE + tag * 8; + + writel((u32)paddr, activate); + writel((u64)paddr >> 32, activate + 4); + + return 0; +} + +static void sil24_irq_clear(struct ata_port *ap) +{ + /* unused */ +} + +static void sil24_freeze(struct ata_port *ap) +{ + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + + /* Port-wide IRQ mask in HOST_CTRL doesn't really work, clear + * PORT_IRQ_ENABLE instead. + */ + writel(0xffff, port + PORT_IRQ_ENABLE_CLR); +} + +static void sil24_thaw(struct ata_port *ap) +{ + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + u32 tmp; + + /* clear IRQ */ + tmp = readl(port + PORT_IRQ_STAT); + writel(tmp, port + PORT_IRQ_STAT); + + /* turn IRQ back on */ + writel(DEF_PORT_IRQ, port + PORT_IRQ_ENABLE_SET); +} + +static void sil24_error_intr(struct ata_port *ap) +{ + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + struct ata_eh_info *ehi = &ap->eh_info; + int freeze = 0; + u32 irq_stat; + + /* on error, we need to clear IRQ explicitly */ + irq_stat = readl(port + PORT_IRQ_STAT); + writel(irq_stat, port + PORT_IRQ_STAT); + + /* first, analyze and record host port events */ + ata_ehi_clear_desc(ehi); + + ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat); + + if (irq_stat & (PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG)) { + ata_ehi_hotplugged(ehi); + ata_ehi_push_desc(ehi, ", %s", + irq_stat & PORT_IRQ_PHYRDY_CHG ? + "PHY RDY changed" : "device exchanged"); + freeze = 1; + } + + if (irq_stat & PORT_IRQ_UNK_FIS) { + ehi->err_mask |= AC_ERR_HSM; + ehi->action |= ATA_EH_SOFTRESET; + ata_ehi_push_desc(ehi , ", unknown FIS"); + freeze = 1; + } + + /* deal with command error */ + if (irq_stat & PORT_IRQ_ERROR) { + struct sil24_cerr_info *ci = NULL; + unsigned int err_mask = 0, action = 0; + struct ata_queued_cmd *qc; + u32 cerr; + + /* analyze CMD_ERR */ + cerr = readl(port + PORT_CMD_ERR); + if (cerr < ARRAY_SIZE(sil24_cerr_db)) + ci = &sil24_cerr_db[cerr]; + + if (ci && ci->desc) { + err_mask |= ci->err_mask; + action |= ci->action; + ata_ehi_push_desc(ehi, ", %s", ci->desc); + } else { + err_mask |= AC_ERR_OTHER; + action |= ATA_EH_SOFTRESET; + ata_ehi_push_desc(ehi, ", unknown command error %d", + cerr); + } + + /* record error info */ + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc) { + sil24_update_tf(ap); + qc->err_mask |= err_mask; + } else + ehi->err_mask |= err_mask; + + ehi->action |= action; + } + + /* freeze or abort */ + if (freeze) + ata_port_freeze(ap); + else + ata_port_abort(ap); +} + +static void sil24_finish_qc(struct ata_queued_cmd *qc) +{ + if (qc->flags & ATA_QCFLAG_RESULT_TF) + sil24_update_tf(qc->ap); +} + +static inline void sil24_host_intr(struct ata_port *ap) +{ + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + u32 slot_stat, qc_active; + int rc; + + slot_stat = readl(port + PORT_SLOT_STAT); + + if (unlikely(slot_stat & HOST_SSTAT_ATTN)) { + sil24_error_intr(ap); + return; + } + + if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) + writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT); + + qc_active = slot_stat & ~HOST_SSTAT_ATTN; + rc = ata_qc_complete_multiple(ap, qc_active, sil24_finish_qc); + if (rc > 0) + return; + if (rc < 0) { + struct ata_eh_info *ehi = &ap->eh_info; + ehi->err_mask |= AC_ERR_HSM; + ehi->action |= ATA_EH_SOFTRESET; + ata_port_freeze(ap); + return; + } + + if (ata_ratelimit()) + ata_port_printk(ap, KERN_INFO, "spurious interrupt " + "(slot_stat 0x%x active_tag %d sactive 0x%x)\n", + slot_stat, ap->active_tag, ap->sactive); +} + +static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + struct sil24_host_priv *hpriv = host_set->private_data; + unsigned handled = 0; + u32 status; + int i; + + status = readl(hpriv->host_base + HOST_IRQ_STAT); + + if (status == 0xffffffff) { + printk(KERN_ERR DRV_NAME ": IRQ status == 0xffffffff, " + "PCI fault or device removal?\n"); + goto out; + } + + if (!(status & IRQ_STAT_4PORTS)) + goto out; + + spin_lock(&host_set->lock); + + for (i = 0; i < host_set->n_ports; i++) + if (status & (1 << i)) { + struct ata_port *ap = host_set->ports[i]; + if (ap && !(ap->flags & ATA_FLAG_DISABLED)) { + sil24_host_intr(host_set->ports[i]); + handled++; + } else + printk(KERN_ERR DRV_NAME + ": interrupt from disabled port %d\n", i); + } + + spin_unlock(&host_set->lock); + out: + return IRQ_RETVAL(handled); +} + +static void sil24_error_handler(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + + if (sil24_init_port(ap)) { + ata_eh_freeze_port(ap); + ehc->i.action |= ATA_EH_HARDRESET; + } + + /* perform recovery */ + ata_do_eh(ap, ata_std_prereset, sil24_softreset, sil24_hardreset, + ata_std_postreset); +} + +static void sil24_post_internal_cmd(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + if (qc->flags & ATA_QCFLAG_FAILED) + qc->err_mask |= AC_ERR_OTHER; + + /* make DMA engine forget about the failed command */ + if (qc->err_mask) + sil24_init_port(ap); +} + +static inline void sil24_cblk_free(struct sil24_port_priv *pp, struct device *dev) +{ + const size_t cb_size = sizeof(*pp->cmd_block) * SIL24_MAX_CMDS; + + dma_free_coherent(dev, cb_size, pp->cmd_block, pp->cmd_block_dma); +} + +static int sil24_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct sil24_port_priv *pp; + union sil24_cmd_block *cb; + size_t cb_size = sizeof(*cb) * SIL24_MAX_CMDS; + dma_addr_t cb_dma; + int rc = -ENOMEM; + + pp = kzalloc(sizeof(*pp), GFP_KERNEL); + if (!pp) + goto err_out; + + pp->tf.command = ATA_DRDY; + + cb = dma_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL); + if (!cb) + goto err_out_pp; + memset(cb, 0, cb_size); + + rc = ata_pad_alloc(ap, dev); + if (rc) + goto err_out_pad; + + pp->cmd_block = cb; + pp->cmd_block_dma = cb_dma; + + ap->private_data = pp; + + return 0; + +err_out_pad: + sil24_cblk_free(pp, dev); +err_out_pp: + kfree(pp); +err_out: + return rc; +} + +static void sil24_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct sil24_port_priv *pp = ap->private_data; + + sil24_cblk_free(pp, dev); + ata_pad_free(ap, dev); + kfree(pp); +} + +static void sil24_host_stop(struct ata_host_set *host_set) +{ + struct sil24_host_priv *hpriv = host_set->private_data; + struct pci_dev *pdev = to_pci_dev(host_set->dev); + + pci_iounmap(pdev, hpriv->host_base); + pci_iounmap(pdev, hpriv->port_base); + kfree(hpriv); +} + +static void sil24_init_controller(struct pci_dev *pdev, int n_ports, + unsigned long host_flags, + void __iomem *host_base, + void __iomem *port_base) +{ + u32 tmp; + int i; + + /* GPIO off */ + writel(0, host_base + HOST_FLASH_CMD); + + /* clear global reset & mask interrupts during initialization */ + writel(0, host_base + HOST_CTRL); + + /* init ports */ + for (i = 0; i < n_ports; i++) { + void __iomem *port = port_base + i * PORT_REGS_SIZE; + + /* Initial PHY setting */ + writel(0x20c, port + PORT_PHY_CFG); + + /* Clear port RST */ + tmp = readl(port + PORT_CTRL_STAT); + if (tmp & PORT_CS_PORT_RST) { + writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); + tmp = ata_wait_register(port + PORT_CTRL_STAT, + PORT_CS_PORT_RST, + PORT_CS_PORT_RST, 10, 100); + if (tmp & PORT_CS_PORT_RST) + dev_printk(KERN_ERR, &pdev->dev, + "failed to clear port RST\n"); + } + + /* Configure IRQ WoC */ + if (host_flags & SIL24_FLAG_PCIX_IRQ_WOC) + writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT); + else + writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); + + /* Zero error counters. */ + writel(0x8000, port + PORT_DECODE_ERR_THRESH); + writel(0x8000, port + PORT_CRC_ERR_THRESH); + writel(0x8000, port + PORT_HSHK_ERR_THRESH); + writel(0x0000, port + PORT_DECODE_ERR_CNT); + writel(0x0000, port + PORT_CRC_ERR_CNT); + writel(0x0000, port + PORT_HSHK_ERR_CNT); + + /* Always use 64bit activation */ + writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR); + + /* Clear port multiplier enable and resume bits */ + writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR); + } + + /* Turn on interrupts */ + writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL); +} + +static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version = 0; + unsigned int board_id = (unsigned int)ent->driver_data; + struct ata_port_info *pinfo = &sil24_port_info[board_id]; + struct ata_probe_ent *probe_ent = NULL; + struct sil24_host_priv *hpriv = NULL; + void __iomem *host_base = NULL; + void __iomem *port_base = NULL; + int i, rc; + u32 tmp; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) + goto out_disable; + + rc = -ENOMEM; + /* map mmio registers */ + host_base = pci_iomap(pdev, 0, 0); + if (!host_base) + goto out_free; + port_base = pci_iomap(pdev, 2, 0); + if (!port_base) + goto out_free; + + /* allocate & init probe_ent and hpriv */ + probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); + if (!probe_ent) + goto out_free; + + hpriv = kzalloc(sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) + goto out_free; + + probe_ent->dev = pci_dev_to_dev(pdev); + INIT_LIST_HEAD(&probe_ent->node); + + probe_ent->sht = pinfo->sht; + probe_ent->host_flags = pinfo->host_flags; + probe_ent->pio_mask = pinfo->pio_mask; + probe_ent->mwdma_mask = pinfo->mwdma_mask; + probe_ent->udma_mask = pinfo->udma_mask; + probe_ent->port_ops = pinfo->port_ops; + probe_ent->n_ports = SIL24_FLAG2NPORTS(pinfo->host_flags); + + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = IRQF_SHARED; + probe_ent->private_data = hpriv; + + hpriv->host_base = host_base; + hpriv->port_base = port_base; + + /* + * Configure the device + */ + if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { + rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); + if (rc) { + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "64-bit DMA enable failed\n"); + goto out_free; + } + } + } else { + rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "32-bit DMA enable failed\n"); + goto out_free; + } + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "32-bit consistent DMA enable failed\n"); + goto out_free; + } + } + + /* Apply workaround for completion IRQ loss on PCI-X errata */ + if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC) { + tmp = readl(host_base + HOST_CTRL); + if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL)) + dev_printk(KERN_INFO, &pdev->dev, + "Applying completion IRQ loss on PCI-X " + "errata fix\n"); + else + probe_ent->host_flags &= ~SIL24_FLAG_PCIX_IRQ_WOC; + } + + for (i = 0; i < probe_ent->n_ports; i++) { + unsigned long portu = + (unsigned long)port_base + i * PORT_REGS_SIZE; + + probe_ent->port[i].cmd_addr = portu; + probe_ent->port[i].scr_addr = portu + PORT_SCONTROL; + + ata_std_ports(&probe_ent->port[i]); + } + + sil24_init_controller(pdev, probe_ent->n_ports, probe_ent->host_flags, + host_base, port_base); + + pci_set_master(pdev); + + /* FIXME: check ata_device_add return value */ + ata_device_add(probe_ent); + + kfree(probe_ent); + return 0; + + out_free: + if (host_base) + pci_iounmap(pdev, host_base); + if (port_base) + pci_iounmap(pdev, port_base); + kfree(probe_ent); + kfree(hpriv); + pci_release_regions(pdev); + out_disable: + pci_disable_device(pdev); + return rc; +} + +static int sil24_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); + struct sil24_host_priv *hpriv = host_set->private_data; + + ata_pci_device_do_resume(pdev); + + if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) + writel(HOST_CTRL_GLOBAL_RST, hpriv->host_base + HOST_CTRL); + + sil24_init_controller(pdev, host_set->n_ports, + host_set->ports[0]->flags, + hpriv->host_base, hpriv->port_base); + + ata_host_set_resume(host_set); + + return 0; +} + +static int __init sil24_init(void) +{ + return pci_register_driver(&sil24_pci_driver); +} + +static void __exit sil24_exit(void) +{ + pci_unregister_driver(&sil24_pci_driver); +} + +MODULE_AUTHOR("Tejun Heo"); +MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sil24_pci_tbl); + +module_init(sil24_init); +module_exit(sil24_exit); diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c new file mode 100644 index 00000000000..ac24f66897f --- /dev/null +++ b/drivers/ata/sata_sis.c @@ -0,0 +1,347 @@ +/* + * sata_sis.c - Silicon Integrated Systems SATA + * + * Maintained by: Uwe Koziolek + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2004 Uwe Koziolek + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available under NDA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "sata_sis" +#define DRV_VERSION "0.6" + +enum { + sis_180 = 0, + SIS_SCR_PCI_BAR = 5, + + /* PCI configuration registers */ + SIS_GENCTL = 0x54, /* IDE General Control register */ + SIS_SCR_BASE = 0xc0, /* sata0 phy SCR registers */ + SIS180_SATA1_OFS = 0x10, /* offset from sata0->sata1 phy regs */ + SIS182_SATA1_OFS = 0x20, /* offset from sata0->sata1 phy regs */ + SIS_PMR = 0x90, /* port mapping register */ + SIS_PMR_COMBINED = 0x30, + + /* random bits */ + SIS_FLAG_CFGSCR = (1 << 30), /* host flag: SCRs via PCI cfg */ + + GENCTL_IOMAPPED_SCR = (1 << 26), /* if set, SCRs are in IO space */ +}; + +static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); +static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg); +static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); + +static const struct pci_device_id sis_pci_tbl[] = { + { PCI_VENDOR_ID_SI, 0x180, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 }, + { PCI_VENDOR_ID_SI, 0x181, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 }, + { PCI_VENDOR_ID_SI, 0x182, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 }, + { } /* terminate list */ +}; + + +static struct pci_driver sis_pci_driver = { + .name = DRV_NAME, + .id_table = sis_pci_tbl, + .probe = sis_init_one, + .remove = ata_pci_remove_one, +}; + +static struct scsi_host_template sis_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = ATA_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations sis_ops = { + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .scr_read = sis_scr_read, + .scr_write = sis_scr_write, + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + +static struct ata_port_info sis_port_info = { + .sht = &sis_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .pio_mask = 0x1f, + .mwdma_mask = 0x7, + .udma_mask = 0x7f, + .port_ops = &sis_ops, +}; + + +MODULE_AUTHOR("Uwe Koziolek"); +MODULE_DESCRIPTION("low-level driver for Silicon Integratad Systems SATA controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sis_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +static unsigned int get_scr_cfg_addr(unsigned int port_no, unsigned int sc_reg, int device) +{ + unsigned int addr = SIS_SCR_BASE + (4 * sc_reg); + + if (port_no) { + if (device == 0x182) + addr += SIS182_SATA1_OFS; + else + addr += SIS180_SATA1_OFS; + } + + return addr; +} + +static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg) +{ + struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg, pdev->device); + u32 val, val2 = 0; + u8 pmr; + + if (sc_reg == SCR_ERROR) /* doesn't exist in PCI cfg space */ + return 0xffffffff; + + pci_read_config_byte(pdev, SIS_PMR, &pmr); + + pci_read_config_dword(pdev, cfg_addr, &val); + + if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) + pci_read_config_dword(pdev, cfg_addr+0x10, &val2); + + return val|val2; +} + +static void sis_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val) +{ + struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, scr, pdev->device); + u8 pmr; + + if (scr == SCR_ERROR) /* doesn't exist in PCI cfg space */ + return; + + pci_read_config_byte(pdev, SIS_PMR, &pmr); + + pci_write_config_dword(pdev, cfg_addr, val); + + if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) + pci_write_config_dword(pdev, cfg_addr+0x10, val); +} + +static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg) +{ + struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + u32 val, val2 = 0; + u8 pmr; + + if (sc_reg > SCR_CONTROL) + return 0xffffffffU; + + if (ap->flags & SIS_FLAG_CFGSCR) + return sis_scr_cfg_read(ap, sc_reg); + + pci_read_config_byte(pdev, SIS_PMR, &pmr); + + val = inl(ap->ioaddr.scr_addr + (sc_reg * 4)); + + if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) + val2 = inl(ap->ioaddr.scr_addr + (sc_reg * 4) + 0x10); + + return val | val2; +} + +static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) +{ + struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + u8 pmr; + + if (sc_reg > SCR_CONTROL) + return; + + pci_read_config_byte(pdev, SIS_PMR, &pmr); + + if (ap->flags & SIS_FLAG_CFGSCR) + sis_scr_cfg_write(ap, sc_reg, val); + else { + outl(val, ap->ioaddr.scr_addr + (sc_reg * 4)); + if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) + outl(val, ap->ioaddr.scr_addr + (sc_reg * 4)+0x10); + } +} + +static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + struct ata_probe_ent *probe_ent = NULL; + int rc; + u32 genctl; + struct ata_port_info *ppi; + int pci_dev_busy = 0; + u8 pmr; + u8 port2_start; + + if (!printed_version++) + dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n"); + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) { + pci_dev_busy = 1; + goto err_out; + } + + rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + + ppi = &sis_port_info; + probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); + if (!probe_ent) { + rc = -ENOMEM; + goto err_out_regions; + } + + /* check and see if the SCRs are in IO space or PCI cfg space */ + pci_read_config_dword(pdev, SIS_GENCTL, &genctl); + if ((genctl & GENCTL_IOMAPPED_SCR) == 0) + probe_ent->host_flags |= SIS_FLAG_CFGSCR; + + /* if hardware thinks SCRs are in IO space, but there are + * no IO resources assigned, change to PCI cfg space. + */ + if ((!(probe_ent->host_flags & SIS_FLAG_CFGSCR)) && + ((pci_resource_start(pdev, SIS_SCR_PCI_BAR) == 0) || + (pci_resource_len(pdev, SIS_SCR_PCI_BAR) < 128))) { + genctl &= ~GENCTL_IOMAPPED_SCR; + pci_write_config_dword(pdev, SIS_GENCTL, genctl); + probe_ent->host_flags |= SIS_FLAG_CFGSCR; + } + + pci_read_config_byte(pdev, SIS_PMR, &pmr); + if (ent->device != 0x182) { + if ((pmr & SIS_PMR_COMBINED) == 0) { + dev_printk(KERN_INFO, &pdev->dev, + "Detected SiS 180/181 chipset in SATA mode\n"); + port2_start = 64; + } + else { + dev_printk(KERN_INFO, &pdev->dev, + "Detected SiS 180/181 chipset in combined mode\n"); + port2_start=0; + } + } + else { + dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182 chipset\n"); + port2_start = 0x20; + } + + if (!(probe_ent->host_flags & SIS_FLAG_CFGSCR)) { + probe_ent->port[0].scr_addr = + pci_resource_start(pdev, SIS_SCR_PCI_BAR); + probe_ent->port[1].scr_addr = + pci_resource_start(pdev, SIS_SCR_PCI_BAR) + port2_start; + } + + pci_set_master(pdev); + pci_intx(pdev, 1); + + /* FIXME: check ata_device_add return value */ + ata_device_add(probe_ent); + kfree(probe_ent); + + return 0; + +err_out_regions: + pci_release_regions(pdev); + +err_out: + if (!pci_dev_busy) + pci_disable_device(pdev); + return rc; + +} + +static int __init sis_init(void) +{ + return pci_register_driver(&sis_pci_driver); +} + +static void __exit sis_exit(void) +{ + pci_unregister_driver(&sis_pci_driver); +} + +module_init(sis_init); +module_exit(sis_exit); + diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c new file mode 100644 index 00000000000..baf259a966d --- /dev/null +++ b/drivers/ata/sata_svw.c @@ -0,0 +1,508 @@ +/* + * sata_svw.c - ServerWorks / Apple K2 SATA + * + * Maintained by: Benjamin Herrenschmidt and + * Jeff Garzik + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003 Benjamin Herrenschmidt + * + * Bits from Jeff Garzik, Copyright RedHat, Inc. + * + * This driver probably works with non-Apple versions of the + * Broadcom chipset... + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available under NDA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_PPC_OF +#include +#include +#endif /* CONFIG_PPC_OF */ + +#define DRV_NAME "sata_svw" +#define DRV_VERSION "2.0" + +enum { + /* Taskfile registers offsets */ + K2_SATA_TF_CMD_OFFSET = 0x00, + K2_SATA_TF_DATA_OFFSET = 0x00, + K2_SATA_TF_ERROR_OFFSET = 0x04, + K2_SATA_TF_NSECT_OFFSET = 0x08, + K2_SATA_TF_LBAL_OFFSET = 0x0c, + K2_SATA_TF_LBAM_OFFSET = 0x10, + K2_SATA_TF_LBAH_OFFSET = 0x14, + K2_SATA_TF_DEVICE_OFFSET = 0x18, + K2_SATA_TF_CMDSTAT_OFFSET = 0x1c, + K2_SATA_TF_CTL_OFFSET = 0x20, + + /* DMA base */ + K2_SATA_DMA_CMD_OFFSET = 0x30, + + /* SCRs base */ + K2_SATA_SCR_STATUS_OFFSET = 0x40, + K2_SATA_SCR_ERROR_OFFSET = 0x44, + K2_SATA_SCR_CONTROL_OFFSET = 0x48, + + /* Others */ + K2_SATA_SICR1_OFFSET = 0x80, + K2_SATA_SICR2_OFFSET = 0x84, + K2_SATA_SIM_OFFSET = 0x88, + + /* Port stride */ + K2_SATA_PORT_OFFSET = 0x100, +}; + +static u8 k2_stat_check_status(struct ata_port *ap); + + +static u32 k2_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) +{ + if (sc_reg > SCR_CONTROL) + return 0xffffffffU; + return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4)); +} + + +static void k2_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, + u32 val) +{ + if (sc_reg > SCR_CONTROL) + return; + writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4)); +} + + +static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + + if (tf->ctl != ap->last_ctl) { + writeb(tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + } + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + writew(tf->feature | (((u16)tf->hob_feature) << 8), ioaddr->feature_addr); + writew(tf->nsect | (((u16)tf->hob_nsect) << 8), ioaddr->nsect_addr); + writew(tf->lbal | (((u16)tf->hob_lbal) << 8), ioaddr->lbal_addr); + writew(tf->lbam | (((u16)tf->hob_lbam) << 8), ioaddr->lbam_addr); + writew(tf->lbah | (((u16)tf->hob_lbah) << 8), ioaddr->lbah_addr); + } else if (is_addr) { + writew(tf->feature, ioaddr->feature_addr); + writew(tf->nsect, ioaddr->nsect_addr); + writew(tf->lbal, ioaddr->lbal_addr); + writew(tf->lbam, ioaddr->lbam_addr); + writew(tf->lbah, ioaddr->lbah_addr); + } + + if (tf->flags & ATA_TFLAG_DEVICE) + writeb(tf->device, ioaddr->device_addr); + + ata_wait_idle(ap); +} + + +static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + u16 nsect, lbal, lbam, lbah, feature; + + tf->command = k2_stat_check_status(ap); + tf->device = readw(ioaddr->device_addr); + feature = readw(ioaddr->error_addr); + nsect = readw(ioaddr->nsect_addr); + lbal = readw(ioaddr->lbal_addr); + lbam = readw(ioaddr->lbam_addr); + lbah = readw(ioaddr->lbah_addr); + + tf->feature = feature; + tf->nsect = nsect; + tf->lbal = lbal; + tf->lbam = lbam; + tf->lbah = lbah; + + if (tf->flags & ATA_TFLAG_LBA48) { + tf->hob_feature = feature >> 8; + tf->hob_nsect = nsect >> 8; + tf->hob_lbal = lbal >> 8; + tf->hob_lbam = lbam >> 8; + tf->hob_lbah = lbah >> 8; + } +} + +/** + * k2_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction (MMIO) + * @qc: Info associated with this ATA transaction. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +static void k2_bmdma_setup_mmio (struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); + u8 dmactl; + void *mmio = (void *) ap->ioaddr.bmdma_addr; + /* load PRD table addr. */ + mb(); /* make sure PRD table writes are visible to controller */ + writel(ap->prd_dma, mmio + ATA_DMA_TABLE_OFS); + + /* specify data direction, triple-check start bit is clear */ + dmactl = readb(mmio + ATA_DMA_CMD); + dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); + if (!rw) + dmactl |= ATA_DMA_WR; + writeb(dmactl, mmio + ATA_DMA_CMD); + + /* issue r/w command if this is not a ATA DMA command*/ + if (qc->tf.protocol != ATA_PROT_DMA) + ap->ops->exec_command(ap, &qc->tf); +} + +/** + * k2_bmdma_start_mmio - Start a PCI IDE BMDMA transaction (MMIO) + * @qc: Info associated with this ATA transaction. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +static void k2_bmdma_start_mmio (struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void *mmio = (void *) ap->ioaddr.bmdma_addr; + u8 dmactl; + + /* start host DMA transaction */ + dmactl = readb(mmio + ATA_DMA_CMD); + writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD); + /* There is a race condition in certain SATA controllers that can + be seen when the r/w command is given to the controller before the + host DMA is started. On a Read command, the controller would initiate + the command to the drive even before it sees the DMA start. When there + are very fast drives connected to the controller, or when the data request + hits in the drive cache, there is the possibility that the drive returns a part + or all of the requested data to the controller before the DMA start is issued. + In this case, the controller would become confused as to what to do with the data. + In the worst case when all the data is returned back to the controller, the + controller could hang. In other cases it could return partial data returning + in data corruption. This problem has been seen in PPC systems and can also appear + on an system with very fast disks, where the SATA controller is sitting behind a + number of bridges, and hence there is significant latency between the r/w command + and the start command. */ + /* issue r/w command if the access is to ATA*/ + if (qc->tf.protocol == ATA_PROT_DMA) + ap->ops->exec_command(ap, &qc->tf); +} + + +static u8 k2_stat_check_status(struct ata_port *ap) +{ + return readl((void *) ap->ioaddr.status_addr); +} + +#ifdef CONFIG_PPC_OF +/* + * k2_sata_proc_info + * inout : decides on the direction of the dataflow and the meaning of the + * variables + * buffer: If inout==FALSE data is being written to it else read from it + * *start: If inout==FALSE start of the valid data in the buffer + * offset: If inout==FALSE offset from the beginning of the imaginary file + * from which we start writing into the buffer + * length: If inout==FALSE max number of bytes to be written into the buffer + * else number of bytes in the buffer + */ +static int k2_sata_proc_info(struct Scsi_Host *shost, char *page, char **start, + off_t offset, int count, int inout) +{ + struct ata_port *ap; + struct device_node *np; + int len, index; + + /* Find the ata_port */ + ap = ata_shost_to_port(shost); + if (ap == NULL) + return 0; + + /* Find the OF node for the PCI device proper */ + np = pci_device_to_OF_node(to_pci_dev(ap->host_set->dev)); + if (np == NULL) + return 0; + + /* Match it to a port node */ + index = (ap == ap->host_set->ports[0]) ? 0 : 1; + for (np = np->child; np != NULL; np = np->sibling) { + u32 *reg = (u32 *)get_property(np, "reg", NULL); + if (!reg) + continue; + if (index == *reg) + break; + } + if (np == NULL) + return 0; + + len = sprintf(page, "devspec: %s\n", np->full_name); + + return len; +} +#endif /* CONFIG_PPC_OF */ + + +static struct scsi_host_template k2_sata_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, +#ifdef CONFIG_PPC_OF + .proc_info = k2_sata_proc_info, +#endif + .bios_param = ata_std_bios_param, +}; + + +static const struct ata_port_operations k2_sata_ops = { + .port_disable = ata_port_disable, + .tf_load = k2_sata_tf_load, + .tf_read = k2_sata_tf_read, + .check_status = k2_stat_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + .bmdma_setup = k2_bmdma_setup_mmio, + .bmdma_start = k2_bmdma_start_mmio, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_mmio_data_xfer, + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .scr_read = k2_sata_scr_read, + .scr_write = k2_sata_scr_write, + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_pci_host_stop, +}; + +static void k2_sata_setup_port(struct ata_ioports *port, unsigned long base) +{ + port->cmd_addr = base + K2_SATA_TF_CMD_OFFSET; + port->data_addr = base + K2_SATA_TF_DATA_OFFSET; + port->feature_addr = + port->error_addr = base + K2_SATA_TF_ERROR_OFFSET; + port->nsect_addr = base + K2_SATA_TF_NSECT_OFFSET; + port->lbal_addr = base + K2_SATA_TF_LBAL_OFFSET; + port->lbam_addr = base + K2_SATA_TF_LBAM_OFFSET; + port->lbah_addr = base + K2_SATA_TF_LBAH_OFFSET; + port->device_addr = base + K2_SATA_TF_DEVICE_OFFSET; + port->command_addr = + port->status_addr = base + K2_SATA_TF_CMDSTAT_OFFSET; + port->altstatus_addr = + port->ctl_addr = base + K2_SATA_TF_CTL_OFFSET; + port->bmdma_addr = base + K2_SATA_DMA_CMD_OFFSET; + port->scr_addr = base + K2_SATA_SCR_STATUS_OFFSET; +} + + +static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + struct ata_probe_ent *probe_ent = NULL; + unsigned long base; + void __iomem *mmio_base; + int pci_dev_busy = 0; + int rc; + int i; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + + /* + * If this driver happens to only be useful on Apple's K2, then + * we should check that here as it has a normal Serverworks ID + */ + rc = pci_enable_device(pdev); + if (rc) + return rc; + /* + * Check if we have resources mapped at all (second function may + * have been disabled by firmware) + */ + if (pci_resource_len(pdev, 5) == 0) + return -ENODEV; + + /* Request PCI regions */ + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) { + pci_dev_busy = 1; + goto err_out; + } + + rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + + probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); + if (probe_ent == NULL) { + rc = -ENOMEM; + goto err_out_regions; + } + + memset(probe_ent, 0, sizeof(*probe_ent)); + probe_ent->dev = pci_dev_to_dev(pdev); + INIT_LIST_HEAD(&probe_ent->node); + + mmio_base = pci_iomap(pdev, 5, 0); + if (mmio_base == NULL) { + rc = -ENOMEM; + goto err_out_free_ent; + } + base = (unsigned long) mmio_base; + + /* Clear a magic bit in SCR1 according to Darwin, those help + * some funky seagate drives (though so far, those were already + * set by the firmware on the machines I had access to) + */ + writel(readl(mmio_base + K2_SATA_SICR1_OFFSET) & ~0x00040000, + mmio_base + K2_SATA_SICR1_OFFSET); + + /* Clear SATA error & interrupts we don't use */ + writel(0xffffffff, mmio_base + K2_SATA_SCR_ERROR_OFFSET); + writel(0x0, mmio_base + K2_SATA_SIM_OFFSET); + + probe_ent->sht = &k2_sata_sht; + probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO; + probe_ent->port_ops = &k2_sata_ops; + probe_ent->n_ports = 4; + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = IRQF_SHARED; + probe_ent->mmio_base = mmio_base; + + /* We don't care much about the PIO/UDMA masks, but the core won't like us + * if we don't fill these + */ + probe_ent->pio_mask = 0x1f; + probe_ent->mwdma_mask = 0x7; + probe_ent->udma_mask = 0x7f; + + /* different controllers have different number of ports - currently 4 or 8 */ + /* All ports are on the same function. Multi-function device is no + * longer available. This should not be seen in any system. */ + for (i = 0; i < ent->driver_data; i++) + k2_sata_setup_port(&probe_ent->port[i], base + i * K2_SATA_PORT_OFFSET); + + pci_set_master(pdev); + + /* FIXME: check ata_device_add return value */ + ata_device_add(probe_ent); + kfree(probe_ent); + + return 0; + +err_out_free_ent: + kfree(probe_ent); +err_out_regions: + pci_release_regions(pdev); +err_out: + if (!pci_dev_busy) + pci_disable_device(pdev); + return rc; +} + +/* 0x240 is device ID for Apple K2 device + * 0x241 is device ID for Serverworks Frodo4 + * 0x242 is device ID for Serverworks Frodo8 + * 0x24a is device ID for BCM5785 (aka HT1000) HT southbridge integrated SATA + * controller + * */ +static const struct pci_device_id k2_sata_pci_tbl[] = { + { 0x1166, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, + { 0x1166, 0x0241, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, + { 0x1166, 0x0242, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, + { 0x1166, 0x024a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, + { 0x1166, 0x024b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, + { } +}; + + +static struct pci_driver k2_sata_pci_driver = { + .name = DRV_NAME, + .id_table = k2_sata_pci_tbl, + .probe = k2_sata_init_one, + .remove = ata_pci_remove_one, +}; + + +static int __init k2_sata_init(void) +{ + return pci_register_driver(&k2_sata_pci_driver); +} + + +static void __exit k2_sata_exit(void) +{ + pci_unregister_driver(&k2_sata_pci_driver); +} + + +MODULE_AUTHOR("Benjamin Herrenschmidt"); +MODULE_DESCRIPTION("low-level driver for K2 SATA controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, k2_sata_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +module_init(k2_sata_init); +module_exit(k2_sata_exit); diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c new file mode 100644 index 00000000000..0da83cba5c1 --- /dev/null +++ b/drivers/ata/sata_sx4.c @@ -0,0 +1,1502 @@ +/* + * sata_sx4.c - Promise SATA + * + * Maintained by: Jeff Garzik + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003-2004 Red Hat, Inc. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available under NDA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "sata_promise.h" + +#define DRV_NAME "sata_sx4" +#define DRV_VERSION "0.9" + + +enum { + PDC_PRD_TBL = 0x44, /* Direct command DMA table addr */ + + PDC_PKT_SUBMIT = 0x40, /* Command packet pointer addr */ + PDC_HDMA_PKT_SUBMIT = 0x100, /* Host DMA packet pointer addr */ + PDC_INT_SEQMASK = 0x40, /* Mask of asserted SEQ INTs */ + PDC_HDMA_CTLSTAT = 0x12C, /* Host DMA control / status */ + + PDC_20621_SEQCTL = 0x400, + PDC_20621_SEQMASK = 0x480, + PDC_20621_GENERAL_CTL = 0x484, + PDC_20621_PAGE_SIZE = (32 * 1024), + + /* chosen, not constant, values; we design our own DIMM mem map */ + PDC_20621_DIMM_WINDOW = 0x0C, /* page# for 32K DIMM window */ + PDC_20621_DIMM_BASE = 0x00200000, + PDC_20621_DIMM_DATA = (64 * 1024), + PDC_DIMM_DATA_STEP = (256 * 1024), + PDC_DIMM_WINDOW_STEP = (8 * 1024), + PDC_DIMM_HOST_PRD = (6 * 1024), + PDC_DIMM_HOST_PKT = (128 * 0), + PDC_DIMM_HPKT_PRD = (128 * 1), + PDC_DIMM_ATA_PKT = (128 * 2), + PDC_DIMM_APKT_PRD = (128 * 3), + PDC_DIMM_HEADER_SZ = PDC_DIMM_APKT_PRD + 128, + PDC_PAGE_WINDOW = 0x40, + PDC_PAGE_DATA = PDC_PAGE_WINDOW + + (PDC_20621_DIMM_DATA / PDC_20621_PAGE_SIZE), + PDC_PAGE_SET = PDC_DIMM_DATA_STEP / PDC_20621_PAGE_SIZE, + + PDC_CHIP0_OFS = 0xC0000, /* offset of chip #0 */ + + PDC_20621_ERR_MASK = (1<<19) | (1<<20) | (1<<21) | (1<<22) | + (1<<23), + + board_20621 = 0, /* FastTrak S150 SX4 */ + + PDC_RESET = (1 << 11), /* HDMA reset */ + + PDC_MAX_HDMA = 32, + PDC_HDMA_Q_MASK = (PDC_MAX_HDMA - 1), + + PDC_DIMM0_SPD_DEV_ADDRESS = 0x50, + PDC_DIMM1_SPD_DEV_ADDRESS = 0x51, + PDC_MAX_DIMM_MODULE = 0x02, + PDC_I2C_CONTROL_OFFSET = 0x48, + PDC_I2C_ADDR_DATA_OFFSET = 0x4C, + PDC_DIMM0_CONTROL_OFFSET = 0x80, + PDC_DIMM1_CONTROL_OFFSET = 0x84, + PDC_SDRAM_CONTROL_OFFSET = 0x88, + PDC_I2C_WRITE = 0x00000000, + PDC_I2C_READ = 0x00000040, + PDC_I2C_START = 0x00000080, + PDC_I2C_MASK_INT = 0x00000020, + PDC_I2C_COMPLETE = 0x00010000, + PDC_I2C_NO_ACK = 0x00100000, + PDC_DIMM_SPD_SUBADDRESS_START = 0x00, + PDC_DIMM_SPD_SUBADDRESS_END = 0x7F, + PDC_DIMM_SPD_ROW_NUM = 3, + PDC_DIMM_SPD_COLUMN_NUM = 4, + PDC_DIMM_SPD_MODULE_ROW = 5, + PDC_DIMM_SPD_TYPE = 11, + PDC_DIMM_SPD_FRESH_RATE = 12, + PDC_DIMM_SPD_BANK_NUM = 17, + PDC_DIMM_SPD_CAS_LATENCY = 18, + PDC_DIMM_SPD_ATTRIBUTE = 21, + PDC_DIMM_SPD_ROW_PRE_CHARGE = 27, + PDC_DIMM_SPD_ROW_ACTIVE_DELAY = 28, + PDC_DIMM_SPD_RAS_CAS_DELAY = 29, + PDC_DIMM_SPD_ACTIVE_PRECHARGE = 30, + PDC_DIMM_SPD_SYSTEM_FREQ = 126, + PDC_CTL_STATUS = 0x08, + PDC_DIMM_WINDOW_CTLR = 0x0C, + PDC_TIME_CONTROL = 0x3C, + PDC_TIME_PERIOD = 0x40, + PDC_TIME_COUNTER = 0x44, + PDC_GENERAL_CTLR = 0x484, + PCI_PLL_INIT = 0x8A531824, + PCI_X_TCOUNT = 0xEE1E5CFF +}; + + +struct pdc_port_priv { + u8 dimm_buf[(ATA_PRD_SZ * ATA_MAX_PRD) + 512]; + u8 *pkt; + dma_addr_t pkt_dma; +}; + +struct pdc_host_priv { + void __iomem *dimm_mmio; + + unsigned int doing_hdma; + unsigned int hdma_prod; + unsigned int hdma_cons; + struct { + struct ata_queued_cmd *qc; + unsigned int seq; + unsigned long pkt_ofs; + } hdma[32]; +}; + + +static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); +static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_regs *regs); +static void pdc_eng_timeout(struct ata_port *ap); +static void pdc_20621_phy_reset (struct ata_port *ap); +static int pdc_port_start(struct ata_port *ap); +static void pdc_port_stop(struct ata_port *ap); +static void pdc20621_qc_prep(struct ata_queued_cmd *qc); +static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf); +static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf); +static void pdc20621_host_stop(struct ata_host_set *host_set); +static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe); +static int pdc20621_detect_dimm(struct ata_probe_ent *pe); +static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, + u32 device, u32 subaddr, u32 *pdata); +static int pdc20621_prog_dimm0(struct ata_probe_ent *pe); +static unsigned int pdc20621_prog_dimm_global(struct ata_probe_ent *pe); +#ifdef ATA_VERBOSE_DEBUG +static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, + void *psource, u32 offset, u32 size); +#endif +static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, + void *psource, u32 offset, u32 size); +static void pdc20621_irq_clear(struct ata_port *ap); +static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc); + + +static struct scsi_host_template pdc_sata_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations pdc_20621_ops = { + .port_disable = ata_port_disable, + .tf_load = pdc_tf_load_mmio, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = pdc_exec_command_mmio, + .dev_select = ata_std_dev_select, + .phy_reset = pdc_20621_phy_reset, + .qc_prep = pdc20621_qc_prep, + .qc_issue = pdc20621_qc_issue_prot, + .data_xfer = ata_mmio_data_xfer, + .eng_timeout = pdc_eng_timeout, + .irq_handler = pdc20621_interrupt, + .irq_clear = pdc20621_irq_clear, + .port_start = pdc_port_start, + .port_stop = pdc_port_stop, + .host_stop = pdc20621_host_stop, +}; + +static const struct ata_port_info pdc_port_info[] = { + /* board_20621 */ + { + .sht = &pdc_sata_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SRST | ATA_FLAG_MMIO | + ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 ; FIXME */ + .port_ops = &pdc_20621_ops, + }, + +}; + +static const struct pci_device_id pdc_sata_pci_tbl[] = { + { PCI_VENDOR_ID_PROMISE, 0x6622, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_20621 }, + { } /* terminate list */ +}; + + +static struct pci_driver pdc_sata_pci_driver = { + .name = DRV_NAME, + .id_table = pdc_sata_pci_tbl, + .probe = pdc_sata_init_one, + .remove = ata_pci_remove_one, +}; + + +static void pdc20621_host_stop(struct ata_host_set *host_set) +{ + struct pci_dev *pdev = to_pci_dev(host_set->dev); + struct pdc_host_priv *hpriv = host_set->private_data; + void __iomem *dimm_mmio = hpriv->dimm_mmio; + + pci_iounmap(pdev, dimm_mmio); + kfree(hpriv); + + pci_iounmap(pdev, host_set->mmio_base); +} + +static int pdc_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct pdc_port_priv *pp; + int rc; + + rc = ata_port_start(ap); + if (rc) + return rc; + + pp = kmalloc(sizeof(*pp), GFP_KERNEL); + if (!pp) { + rc = -ENOMEM; + goto err_out; + } + memset(pp, 0, sizeof(*pp)); + + pp->pkt = dma_alloc_coherent(dev, 128, &pp->pkt_dma, GFP_KERNEL); + if (!pp->pkt) { + rc = -ENOMEM; + goto err_out_kfree; + } + + ap->private_data = pp; + + return 0; + +err_out_kfree: + kfree(pp); +err_out: + ata_port_stop(ap); + return rc; +} + + +static void pdc_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct pdc_port_priv *pp = ap->private_data; + + ap->private_data = NULL; + dma_free_coherent(dev, 128, pp->pkt, pp->pkt_dma); + kfree(pp); + ata_port_stop(ap); +} + + +static void pdc_20621_phy_reset (struct ata_port *ap) +{ + VPRINTK("ENTER\n"); + ap->cbl = ATA_CBL_SATA; + ata_port_probe(ap); + ata_bus_reset(ap); +} + +static inline void pdc20621_ata_sg(struct ata_taskfile *tf, u8 *buf, + unsigned int portno, + unsigned int total_len) +{ + u32 addr; + unsigned int dw = PDC_DIMM_APKT_PRD >> 2; + u32 *buf32 = (u32 *) buf; + + /* output ATA packet S/G table */ + addr = PDC_20621_DIMM_BASE + PDC_20621_DIMM_DATA + + (PDC_DIMM_DATA_STEP * portno); + VPRINTK("ATA sg addr 0x%x, %d\n", addr, addr); + buf32[dw] = cpu_to_le32(addr); + buf32[dw + 1] = cpu_to_le32(total_len | ATA_PRD_EOT); + + VPRINTK("ATA PSG @ %x == (0x%x, 0x%x)\n", + PDC_20621_DIMM_BASE + + (PDC_DIMM_WINDOW_STEP * portno) + + PDC_DIMM_APKT_PRD, + buf32[dw], buf32[dw + 1]); +} + +static inline void pdc20621_host_sg(struct ata_taskfile *tf, u8 *buf, + unsigned int portno, + unsigned int total_len) +{ + u32 addr; + unsigned int dw = PDC_DIMM_HPKT_PRD >> 2; + u32 *buf32 = (u32 *) buf; + + /* output Host DMA packet S/G table */ + addr = PDC_20621_DIMM_BASE + PDC_20621_DIMM_DATA + + (PDC_DIMM_DATA_STEP * portno); + + buf32[dw] = cpu_to_le32(addr); + buf32[dw + 1] = cpu_to_le32(total_len | ATA_PRD_EOT); + + VPRINTK("HOST PSG @ %x == (0x%x, 0x%x)\n", + PDC_20621_DIMM_BASE + + (PDC_DIMM_WINDOW_STEP * portno) + + PDC_DIMM_HPKT_PRD, + buf32[dw], buf32[dw + 1]); +} + +static inline unsigned int pdc20621_ata_pkt(struct ata_taskfile *tf, + unsigned int devno, u8 *buf, + unsigned int portno) +{ + unsigned int i, dw; + u32 *buf32 = (u32 *) buf; + u8 dev_reg; + + unsigned int dimm_sg = PDC_20621_DIMM_BASE + + (PDC_DIMM_WINDOW_STEP * portno) + + PDC_DIMM_APKT_PRD; + VPRINTK("ENTER, dimm_sg == 0x%x, %d\n", dimm_sg, dimm_sg); + + i = PDC_DIMM_ATA_PKT; + + /* + * Set up ATA packet + */ + if ((tf->protocol == ATA_PROT_DMA) && (!(tf->flags & ATA_TFLAG_WRITE))) + buf[i++] = PDC_PKT_READ; + else if (tf->protocol == ATA_PROT_NODATA) + buf[i++] = PDC_PKT_NODATA; + else + buf[i++] = 0; + buf[i++] = 0; /* reserved */ + buf[i++] = portno + 1; /* seq. id */ + buf[i++] = 0xff; /* delay seq. id */ + + /* dimm dma S/G, and next-pkt */ + dw = i >> 2; + if (tf->protocol == ATA_PROT_NODATA) + buf32[dw] = 0; + else + buf32[dw] = cpu_to_le32(dimm_sg); + buf32[dw + 1] = 0; + i += 8; + + if (devno == 0) + dev_reg = ATA_DEVICE_OBS; + else + dev_reg = ATA_DEVICE_OBS | ATA_DEV1; + + /* select device */ + buf[i++] = (1 << 5) | PDC_PKT_CLEAR_BSY | ATA_REG_DEVICE; + buf[i++] = dev_reg; + + /* device control register */ + buf[i++] = (1 << 5) | PDC_REG_DEVCTL; + buf[i++] = tf->ctl; + + return i; +} + +static inline void pdc20621_host_pkt(struct ata_taskfile *tf, u8 *buf, + unsigned int portno) +{ + unsigned int dw; + u32 tmp, *buf32 = (u32 *) buf; + + unsigned int host_sg = PDC_20621_DIMM_BASE + + (PDC_DIMM_WINDOW_STEP * portno) + + PDC_DIMM_HOST_PRD; + unsigned int dimm_sg = PDC_20621_DIMM_BASE + + (PDC_DIMM_WINDOW_STEP * portno) + + PDC_DIMM_HPKT_PRD; + VPRINTK("ENTER, dimm_sg == 0x%x, %d\n", dimm_sg, dimm_sg); + VPRINTK("host_sg == 0x%x, %d\n", host_sg, host_sg); + + dw = PDC_DIMM_HOST_PKT >> 2; + + /* + * Set up Host DMA packet + */ + if ((tf->protocol == ATA_PROT_DMA) && (!(tf->flags & ATA_TFLAG_WRITE))) + tmp = PDC_PKT_READ; + else + tmp = 0; + tmp |= ((portno + 1 + 4) << 16); /* seq. id */ + tmp |= (0xff << 24); /* delay seq. id */ + buf32[dw + 0] = cpu_to_le32(tmp); + buf32[dw + 1] = cpu_to_le32(host_sg); + buf32[dw + 2] = cpu_to_le32(dimm_sg); + buf32[dw + 3] = 0; + + VPRINTK("HOST PKT @ %x == (0x%x 0x%x 0x%x 0x%x)\n", + PDC_20621_DIMM_BASE + (PDC_DIMM_WINDOW_STEP * portno) + + PDC_DIMM_HOST_PKT, + buf32[dw + 0], + buf32[dw + 1], + buf32[dw + 2], + buf32[dw + 3]); +} + +static void pdc20621_dma_prep(struct ata_queued_cmd *qc) +{ + struct scatterlist *sg; + struct ata_port *ap = qc->ap; + struct pdc_port_priv *pp = ap->private_data; + void __iomem *mmio = ap->host_set->mmio_base; + struct pdc_host_priv *hpriv = ap->host_set->private_data; + void __iomem *dimm_mmio = hpriv->dimm_mmio; + unsigned int portno = ap->port_no; + unsigned int i, idx, total_len = 0, sgt_len; + u32 *buf = (u32 *) &pp->dimm_buf[PDC_DIMM_HEADER_SZ]; + + WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP)); + + VPRINTK("ata%u: ENTER\n", ap->id); + + /* hard-code chip #0 */ + mmio += PDC_CHIP0_OFS; + + /* + * Build S/G table + */ + idx = 0; + ata_for_each_sg(sg, qc) { + buf[idx++] = cpu_to_le32(sg_dma_address(sg)); + buf[idx++] = cpu_to_le32(sg_dma_len(sg)); + total_len += sg_dma_len(sg); + } + buf[idx - 1] |= cpu_to_le32(ATA_PRD_EOT); + sgt_len = idx * 4; + + /* + * Build ATA, host DMA packets + */ + pdc20621_host_sg(&qc->tf, &pp->dimm_buf[0], portno, total_len); + pdc20621_host_pkt(&qc->tf, &pp->dimm_buf[0], portno); + + pdc20621_ata_sg(&qc->tf, &pp->dimm_buf[0], portno, total_len); + i = pdc20621_ata_pkt(&qc->tf, qc->dev->devno, &pp->dimm_buf[0], portno); + + if (qc->tf.flags & ATA_TFLAG_LBA48) + i = pdc_prep_lba48(&qc->tf, &pp->dimm_buf[0], i); + else + i = pdc_prep_lba28(&qc->tf, &pp->dimm_buf[0], i); + + pdc_pkt_footer(&qc->tf, &pp->dimm_buf[0], i); + + /* copy three S/G tables and two packets to DIMM MMIO window */ + memcpy_toio(dimm_mmio + (portno * PDC_DIMM_WINDOW_STEP), + &pp->dimm_buf, PDC_DIMM_HEADER_SZ); + memcpy_toio(dimm_mmio + (portno * PDC_DIMM_WINDOW_STEP) + + PDC_DIMM_HOST_PRD, + &pp->dimm_buf[PDC_DIMM_HEADER_SZ], sgt_len); + + /* force host FIFO dump */ + writel(0x00000001, mmio + PDC_20621_GENERAL_CTL); + + readl(dimm_mmio); /* MMIO PCI posting flush */ + + VPRINTK("ata pkt buf ofs %u, prd size %u, mmio copied\n", i, sgt_len); +} + +static void pdc20621_nodata_prep(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pdc_port_priv *pp = ap->private_data; + void __iomem *mmio = ap->host_set->mmio_base; + struct pdc_host_priv *hpriv = ap->host_set->private_data; + void __iomem *dimm_mmio = hpriv->dimm_mmio; + unsigned int portno = ap->port_no; + unsigned int i; + + VPRINTK("ata%u: ENTER\n", ap->id); + + /* hard-code chip #0 */ + mmio += PDC_CHIP0_OFS; + + i = pdc20621_ata_pkt(&qc->tf, qc->dev->devno, &pp->dimm_buf[0], portno); + + if (qc->tf.flags & ATA_TFLAG_LBA48) + i = pdc_prep_lba48(&qc->tf, &pp->dimm_buf[0], i); + else + i = pdc_prep_lba28(&qc->tf, &pp->dimm_buf[0], i); + + pdc_pkt_footer(&qc->tf, &pp->dimm_buf[0], i); + + /* copy three S/G tables and two packets to DIMM MMIO window */ + memcpy_toio(dimm_mmio + (portno * PDC_DIMM_WINDOW_STEP), + &pp->dimm_buf, PDC_DIMM_HEADER_SZ); + + /* force host FIFO dump */ + writel(0x00000001, mmio + PDC_20621_GENERAL_CTL); + + readl(dimm_mmio); /* MMIO PCI posting flush */ + + VPRINTK("ata pkt buf ofs %u, mmio copied\n", i); +} + +static void pdc20621_qc_prep(struct ata_queued_cmd *qc) +{ + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + pdc20621_dma_prep(qc); + break; + case ATA_PROT_NODATA: + pdc20621_nodata_prep(qc); + break; + default: + break; + } +} + +static void __pdc20621_push_hdma(struct ata_queued_cmd *qc, + unsigned int seq, + u32 pkt_ofs) +{ + struct ata_port *ap = qc->ap; + struct ata_host_set *host_set = ap->host_set; + void __iomem *mmio = host_set->mmio_base; + + /* hard-code chip #0 */ + mmio += PDC_CHIP0_OFS; + + writel(0x00000001, mmio + PDC_20621_SEQCTL + (seq * 4)); + readl(mmio + PDC_20621_SEQCTL + (seq * 4)); /* flush */ + + writel(pkt_ofs, mmio + PDC_HDMA_PKT_SUBMIT); + readl(mmio + PDC_HDMA_PKT_SUBMIT); /* flush */ +} + +static void pdc20621_push_hdma(struct ata_queued_cmd *qc, + unsigned int seq, + u32 pkt_ofs) +{ + struct ata_port *ap = qc->ap; + struct pdc_host_priv *pp = ap->host_set->private_data; + unsigned int idx = pp->hdma_prod & PDC_HDMA_Q_MASK; + + if (!pp->doing_hdma) { + __pdc20621_push_hdma(qc, seq, pkt_ofs); + pp->doing_hdma = 1; + return; + } + + pp->hdma[idx].qc = qc; + pp->hdma[idx].seq = seq; + pp->hdma[idx].pkt_ofs = pkt_ofs; + pp->hdma_prod++; +} + +static void pdc20621_pop_hdma(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pdc_host_priv *pp = ap->host_set->private_data; + unsigned int idx = pp->hdma_cons & PDC_HDMA_Q_MASK; + + /* if nothing on queue, we're done */ + if (pp->hdma_prod == pp->hdma_cons) { + pp->doing_hdma = 0; + return; + } + + __pdc20621_push_hdma(pp->hdma[idx].qc, pp->hdma[idx].seq, + pp->hdma[idx].pkt_ofs); + pp->hdma_cons++; +} + +#ifdef ATA_VERBOSE_DEBUG +static void pdc20621_dump_hdma(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned int port_no = ap->port_no; + struct pdc_host_priv *hpriv = ap->host_set->private_data; + void *dimm_mmio = hpriv->dimm_mmio; + + dimm_mmio += (port_no * PDC_DIMM_WINDOW_STEP); + dimm_mmio += PDC_DIMM_HOST_PKT; + + printk(KERN_ERR "HDMA[0] == 0x%08X\n", readl(dimm_mmio)); + printk(KERN_ERR "HDMA[1] == 0x%08X\n", readl(dimm_mmio + 4)); + printk(KERN_ERR "HDMA[2] == 0x%08X\n", readl(dimm_mmio + 8)); + printk(KERN_ERR "HDMA[3] == 0x%08X\n", readl(dimm_mmio + 12)); +} +#else +static inline void pdc20621_dump_hdma(struct ata_queued_cmd *qc) { } +#endif /* ATA_VERBOSE_DEBUG */ + +static void pdc20621_packet_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_host_set *host_set = ap->host_set; + unsigned int port_no = ap->port_no; + void __iomem *mmio = host_set->mmio_base; + unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); + u8 seq = (u8) (port_no + 1); + unsigned int port_ofs; + + /* hard-code chip #0 */ + mmio += PDC_CHIP0_OFS; + + VPRINTK("ata%u: ENTER\n", ap->id); + + wmb(); /* flush PRD, pkt writes */ + + port_ofs = PDC_20621_DIMM_BASE + (PDC_DIMM_WINDOW_STEP * port_no); + + /* if writing, we (1) DMA to DIMM, then (2) do ATA command */ + if (rw && qc->tf.protocol == ATA_PROT_DMA) { + seq += 4; + + pdc20621_dump_hdma(qc); + pdc20621_push_hdma(qc, seq, port_ofs + PDC_DIMM_HOST_PKT); + VPRINTK("queued ofs 0x%x (%u), seq %u\n", + port_ofs + PDC_DIMM_HOST_PKT, + port_ofs + PDC_DIMM_HOST_PKT, + seq); + } else { + writel(0x00000001, mmio + PDC_20621_SEQCTL + (seq * 4)); + readl(mmio + PDC_20621_SEQCTL + (seq * 4)); /* flush */ + + writel(port_ofs + PDC_DIMM_ATA_PKT, + (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + VPRINTK("submitted ofs 0x%x (%u), seq %u\n", + port_ofs + PDC_DIMM_ATA_PKT, + port_ofs + PDC_DIMM_ATA_PKT, + seq); + } +} + +static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc) +{ + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + case ATA_PROT_NODATA: + pdc20621_packet_start(qc); + return 0; + + case ATA_PROT_ATAPI_DMA: + BUG(); + break; + + default: + break; + } + + return ata_qc_issue_prot(qc); +} + +static inline unsigned int pdc20621_host_intr( struct ata_port *ap, + struct ata_queued_cmd *qc, + unsigned int doing_hdma, + void __iomem *mmio) +{ + unsigned int port_no = ap->port_no; + unsigned int port_ofs = + PDC_20621_DIMM_BASE + (PDC_DIMM_WINDOW_STEP * port_no); + u8 status; + unsigned int handled = 0; + + VPRINTK("ENTER\n"); + + if ((qc->tf.protocol == ATA_PROT_DMA) && /* read */ + (!(qc->tf.flags & ATA_TFLAG_WRITE))) { + + /* step two - DMA from DIMM to host */ + if (doing_hdma) { + VPRINTK("ata%u: read hdma, 0x%x 0x%x\n", ap->id, + readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT)); + /* get drive status; clear intr; complete txn */ + qc->err_mask |= ac_err_mask(ata_wait_idle(ap)); + ata_qc_complete(qc); + pdc20621_pop_hdma(qc); + } + + /* step one - exec ATA command */ + else { + u8 seq = (u8) (port_no + 1 + 4); + VPRINTK("ata%u: read ata, 0x%x 0x%x\n", ap->id, + readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT)); + + /* submit hdma pkt */ + pdc20621_dump_hdma(qc); + pdc20621_push_hdma(qc, seq, + port_ofs + PDC_DIMM_HOST_PKT); + } + handled = 1; + + } else if (qc->tf.protocol == ATA_PROT_DMA) { /* write */ + + /* step one - DMA from host to DIMM */ + if (doing_hdma) { + u8 seq = (u8) (port_no + 1); + VPRINTK("ata%u: write hdma, 0x%x 0x%x\n", ap->id, + readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT)); + + /* submit ata pkt */ + writel(0x00000001, mmio + PDC_20621_SEQCTL + (seq * 4)); + readl(mmio + PDC_20621_SEQCTL + (seq * 4)); + writel(port_ofs + PDC_DIMM_ATA_PKT, + (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + } + + /* step two - execute ATA command */ + else { + VPRINTK("ata%u: write ata, 0x%x 0x%x\n", ap->id, + readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT)); + /* get drive status; clear intr; complete txn */ + qc->err_mask |= ac_err_mask(ata_wait_idle(ap)); + ata_qc_complete(qc); + pdc20621_pop_hdma(qc); + } + handled = 1; + + /* command completion, but no data xfer */ + } else if (qc->tf.protocol == ATA_PROT_NODATA) { + + status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); + DPRINTK("BUS_NODATA (drv_stat 0x%X)\n", status); + qc->err_mask |= ac_err_mask(status); + ata_qc_complete(qc); + handled = 1; + + } else { + ap->stats.idle_irq++; + } + + return handled; +} + +static void pdc20621_irq_clear(struct ata_port *ap) +{ + struct ata_host_set *host_set = ap->host_set; + void __iomem *mmio = host_set->mmio_base; + + mmio += PDC_CHIP0_OFS; + + readl(mmio + PDC_20621_SEQMASK); +} + +static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + struct ata_port *ap; + u32 mask = 0; + unsigned int i, tmp, port_no; + unsigned int handled = 0; + void __iomem *mmio_base; + + VPRINTK("ENTER\n"); + + if (!host_set || !host_set->mmio_base) { + VPRINTK("QUICK EXIT\n"); + return IRQ_NONE; + } + + mmio_base = host_set->mmio_base; + + /* reading should also clear interrupts */ + mmio_base += PDC_CHIP0_OFS; + mask = readl(mmio_base + PDC_20621_SEQMASK); + VPRINTK("mask == 0x%x\n", mask); + + if (mask == 0xffffffff) { + VPRINTK("QUICK EXIT 2\n"); + return IRQ_NONE; + } + mask &= 0xffff; /* only 16 tags possible */ + if (!mask) { + VPRINTK("QUICK EXIT 3\n"); + return IRQ_NONE; + } + + spin_lock(&host_set->lock); + + for (i = 1; i < 9; i++) { + port_no = i - 1; + if (port_no > 3) + port_no -= 4; + if (port_no >= host_set->n_ports) + ap = NULL; + else + ap = host_set->ports[port_no]; + tmp = mask & (1 << i); + VPRINTK("seq %u, port_no %u, ap %p, tmp %x\n", i, port_no, ap, tmp); + if (tmp && ap && + !(ap->flags & ATA_FLAG_DISABLED)) { + struct ata_queued_cmd *qc; + + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) + handled += pdc20621_host_intr(ap, qc, (i > 4), + mmio_base); + } + } + + spin_unlock(&host_set->lock); + + VPRINTK("mask == 0x%x\n", mask); + + VPRINTK("EXIT\n"); + + return IRQ_RETVAL(handled); +} + +static void pdc_eng_timeout(struct ata_port *ap) +{ + u8 drv_stat; + struct ata_host_set *host_set = ap->host_set; + struct ata_queued_cmd *qc; + unsigned long flags; + + DPRINTK("ENTER\n"); + + spin_lock_irqsave(&host_set->lock, flags); + + qc = ata_qc_from_tag(ap, ap->active_tag); + + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + case ATA_PROT_NODATA: + ata_port_printk(ap, KERN_ERR, "command timeout\n"); + qc->err_mask |= __ac_err_mask(ata_wait_idle(ap)); + break; + + default: + drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); + + ata_port_printk(ap, KERN_ERR, + "unknown timeout, cmd 0x%x stat 0x%x\n", + qc->tf.command, drv_stat); + + qc->err_mask |= ac_err_mask(drv_stat); + break; + } + + spin_unlock_irqrestore(&host_set->lock, flags); + ata_eh_qc_complete(qc); + DPRINTK("EXIT\n"); +} + +static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) +{ + WARN_ON (tf->protocol == ATA_PROT_DMA || + tf->protocol == ATA_PROT_NODATA); + ata_tf_load(ap, tf); +} + + +static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) +{ + WARN_ON (tf->protocol == ATA_PROT_DMA || + tf->protocol == ATA_PROT_NODATA); + ata_exec_command(ap, tf); +} + + +static void pdc_sata_setup_port(struct ata_ioports *port, unsigned long base) +{ + port->cmd_addr = base; + port->data_addr = base; + port->feature_addr = + port->error_addr = base + 0x4; + port->nsect_addr = base + 0x8; + port->lbal_addr = base + 0xc; + port->lbam_addr = base + 0x10; + port->lbah_addr = base + 0x14; + port->device_addr = base + 0x18; + port->command_addr = + port->status_addr = base + 0x1c; + port->altstatus_addr = + port->ctl_addr = base + 0x38; +} + + +#ifdef ATA_VERBOSE_DEBUG +static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, void *psource, + u32 offset, u32 size) +{ + u32 window_size; + u16 idx; + u8 page_mask; + long dist; + void __iomem *mmio = pe->mmio_base; + struct pdc_host_priv *hpriv = pe->private_data; + void __iomem *dimm_mmio = hpriv->dimm_mmio; + + /* hard-code chip #0 */ + mmio += PDC_CHIP0_OFS; + + page_mask = 0x00; + window_size = 0x2000 * 4; /* 32K byte uchar size */ + idx = (u16) (offset / window_size); + + writel(0x01, mmio + PDC_GENERAL_CTLR); + readl(mmio + PDC_GENERAL_CTLR); + writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); + readl(mmio + PDC_DIMM_WINDOW_CTLR); + + offset -= (idx * window_size); + idx++; + dist = ((long) (window_size - (offset + size))) >= 0 ? size : + (long) (window_size - offset); + memcpy_fromio((char *) psource, (char *) (dimm_mmio + offset / 4), + dist); + + psource += dist; + size -= dist; + for (; (long) size >= (long) window_size ;) { + writel(0x01, mmio + PDC_GENERAL_CTLR); + readl(mmio + PDC_GENERAL_CTLR); + writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); + readl(mmio + PDC_DIMM_WINDOW_CTLR); + memcpy_fromio((char *) psource, (char *) (dimm_mmio), + window_size / 4); + psource += window_size; + size -= window_size; + idx ++; + } + + if (size) { + writel(0x01, mmio + PDC_GENERAL_CTLR); + readl(mmio + PDC_GENERAL_CTLR); + writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); + readl(mmio + PDC_DIMM_WINDOW_CTLR); + memcpy_fromio((char *) psource, (char *) (dimm_mmio), + size / 4); + } +} +#endif + + +static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, + u32 offset, u32 size) +{ + u32 window_size; + u16 idx; + u8 page_mask; + long dist; + void __iomem *mmio = pe->mmio_base; + struct pdc_host_priv *hpriv = pe->private_data; + void __iomem *dimm_mmio = hpriv->dimm_mmio; + + /* hard-code chip #0 */ + mmio += PDC_CHIP0_OFS; + + page_mask = 0x00; + window_size = 0x2000 * 4; /* 32K byte uchar size */ + idx = (u16) (offset / window_size); + + writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); + readl(mmio + PDC_DIMM_WINDOW_CTLR); + offset -= (idx * window_size); + idx++; + dist = ((long)(s32)(window_size - (offset + size))) >= 0 ? size : + (long) (window_size - offset); + memcpy_toio(dimm_mmio + offset / 4, psource, dist); + writel(0x01, mmio + PDC_GENERAL_CTLR); + readl(mmio + PDC_GENERAL_CTLR); + + psource += dist; + size -= dist; + for (; (long) size >= (long) window_size ;) { + writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); + readl(mmio + PDC_DIMM_WINDOW_CTLR); + memcpy_toio(dimm_mmio, psource, window_size / 4); + writel(0x01, mmio + PDC_GENERAL_CTLR); + readl(mmio + PDC_GENERAL_CTLR); + psource += window_size; + size -= window_size; + idx ++; + } + + if (size) { + writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); + readl(mmio + PDC_DIMM_WINDOW_CTLR); + memcpy_toio(dimm_mmio, psource, size / 4); + writel(0x01, mmio + PDC_GENERAL_CTLR); + readl(mmio + PDC_GENERAL_CTLR); + } +} + + +static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, u32 device, + u32 subaddr, u32 *pdata) +{ + void __iomem *mmio = pe->mmio_base; + u32 i2creg = 0; + u32 status; + u32 count =0; + + /* hard-code chip #0 */ + mmio += PDC_CHIP0_OFS; + + i2creg |= device << 24; + i2creg |= subaddr << 16; + + /* Set the device and subaddress */ + writel(i2creg, mmio + PDC_I2C_ADDR_DATA_OFFSET); + readl(mmio + PDC_I2C_ADDR_DATA_OFFSET); + + /* Write Control to perform read operation, mask int */ + writel(PDC_I2C_READ | PDC_I2C_START | PDC_I2C_MASK_INT, + mmio + PDC_I2C_CONTROL_OFFSET); + + for (count = 0; count <= 1000; count ++) { + status = readl(mmio + PDC_I2C_CONTROL_OFFSET); + if (status & PDC_I2C_COMPLETE) { + status = readl(mmio + PDC_I2C_ADDR_DATA_OFFSET); + break; + } else if (count == 1000) + return 0; + } + + *pdata = (status >> 8) & 0x000000ff; + return 1; +} + + +static int pdc20621_detect_dimm(struct ata_probe_ent *pe) +{ + u32 data=0 ; + if (pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, + PDC_DIMM_SPD_SYSTEM_FREQ, &data)) { + if (data == 100) + return 100; + } else + return 0; + + if (pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, 9, &data)) { + if(data <= 0x75) + return 133; + } else + return 0; + + return 0; +} + + +static int pdc20621_prog_dimm0(struct ata_probe_ent *pe) +{ + u32 spd0[50]; + u32 data = 0; + int size, i; + u8 bdimmsize; + void __iomem *mmio = pe->mmio_base; + static const struct { + unsigned int reg; + unsigned int ofs; + } pdc_i2c_read_data [] = { + { PDC_DIMM_SPD_TYPE, 11 }, + { PDC_DIMM_SPD_FRESH_RATE, 12 }, + { PDC_DIMM_SPD_COLUMN_NUM, 4 }, + { PDC_DIMM_SPD_ATTRIBUTE, 21 }, + { PDC_DIMM_SPD_ROW_NUM, 3 }, + { PDC_DIMM_SPD_BANK_NUM, 17 }, + { PDC_DIMM_SPD_MODULE_ROW, 5 }, + { PDC_DIMM_SPD_ROW_PRE_CHARGE, 27 }, + { PDC_DIMM_SPD_ROW_ACTIVE_DELAY, 28 }, + { PDC_DIMM_SPD_RAS_CAS_DELAY, 29 }, + { PDC_DIMM_SPD_ACTIVE_PRECHARGE, 30 }, + { PDC_DIMM_SPD_CAS_LATENCY, 18 }, + }; + + /* hard-code chip #0 */ + mmio += PDC_CHIP0_OFS; + + for(i=0; i spd0[28]) + ? spd0[29] : spd0[28]) + 9) / 10) - 1) << 10; + data |= ((spd0[30] - spd0[29] + 9) / 10 - 2) << 12; + + if (spd0[18] & 0x08) + data |= ((0x03) << 14); + else if (spd0[18] & 0x04) + data |= ((0x02) << 14); + else if (spd0[18] & 0x01) + data |= ((0x01) << 14); + else + data |= (0 << 14); + + /* + Calculate the size of bDIMMSize (power of 2) and + merge the DIMM size by program start/end address. + */ + + bdimmsize = spd0[4] + (spd0[5] / 2) + spd0[3] + (spd0[17] / 2) + 3; + size = (1 << bdimmsize) >> 20; /* size = xxx(MB) */ + data |= (((size / 16) - 1) << 16); + data |= (0 << 23); + data |= 8; + writel(data, mmio + PDC_DIMM0_CONTROL_OFFSET); + readl(mmio + PDC_DIMM0_CONTROL_OFFSET); + return size; +} + + +static unsigned int pdc20621_prog_dimm_global(struct ata_probe_ent *pe) +{ + u32 data, spd0; + int error, i; + void __iomem *mmio = pe->mmio_base; + + /* hard-code chip #0 */ + mmio += PDC_CHIP0_OFS; + + /* + Set To Default : DIMM Module Global Control Register (0x022259F1) + DIMM Arbitration Disable (bit 20) + DIMM Data/Control Output Driving Selection (bit12 - bit15) + Refresh Enable (bit 17) + */ + + data = 0x022259F1; + writel(data, mmio + PDC_SDRAM_CONTROL_OFFSET); + readl(mmio + PDC_SDRAM_CONTROL_OFFSET); + + /* Turn on for ECC */ + pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, + PDC_DIMM_SPD_TYPE, &spd0); + if (spd0 == 0x02) { + data |= (0x01 << 16); + writel(data, mmio + PDC_SDRAM_CONTROL_OFFSET); + readl(mmio + PDC_SDRAM_CONTROL_OFFSET); + printk(KERN_ERR "Local DIMM ECC Enabled\n"); + } + + /* DIMM Initialization Select/Enable (bit 18/19) */ + data &= (~(1<<18)); + data |= (1<<19); + writel(data, mmio + PDC_SDRAM_CONTROL_OFFSET); + + error = 1; + for (i = 1; i <= 10; i++) { /* polling ~5 secs */ + data = readl(mmio + PDC_SDRAM_CONTROL_OFFSET); + if (!(data & (1<<19))) { + error = 0; + break; + } + msleep(i*100); + } + return error; +} + + +static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe) +{ + int speed, size, length; + u32 addr,spd0,pci_status; + u32 tmp=0; + u32 time_period=0; + u32 tcount=0; + u32 ticks=0; + u32 clock=0; + u32 fparam=0; + void __iomem *mmio = pe->mmio_base; + + /* hard-code chip #0 */ + mmio += PDC_CHIP0_OFS; + + /* Initialize PLL based upon PCI Bus Frequency */ + + /* Initialize Time Period Register */ + writel(0xffffffff, mmio + PDC_TIME_PERIOD); + time_period = readl(mmio + PDC_TIME_PERIOD); + VPRINTK("Time Period Register (0x40): 0x%x\n", time_period); + + /* Enable timer */ + writel(0x00001a0, mmio + PDC_TIME_CONTROL); + readl(mmio + PDC_TIME_CONTROL); + + /* Wait 3 seconds */ + msleep(3000); + + /* + When timer is enabled, counter is decreased every internal + clock cycle. + */ + + tcount = readl(mmio + PDC_TIME_COUNTER); + VPRINTK("Time Counter Register (0x44): 0x%x\n", tcount); + + /* + If SX4 is on PCI-X bus, after 3 seconds, the timer counter + register should be >= (0xffffffff - 3x10^8). + */ + if(tcount >= PCI_X_TCOUNT) { + ticks = (time_period - tcount); + VPRINTK("Num counters 0x%x (%d)\n", ticks, ticks); + + clock = (ticks / 300000); + VPRINTK("10 * Internal clk = 0x%x (%d)\n", clock, clock); + + clock = (clock * 33); + VPRINTK("10 * Internal clk * 33 = 0x%x (%d)\n", clock, clock); + + /* PLL F Param (bit 22:16) */ + fparam = (1400000 / clock) - 2; + VPRINTK("PLL F Param: 0x%x (%d)\n", fparam, fparam); + + /* OD param = 0x2 (bit 31:30), R param = 0x5 (bit 29:25) */ + pci_status = (0x8a001824 | (fparam << 16)); + } else + pci_status = PCI_PLL_INIT; + + /* Initialize PLL. */ + VPRINTK("pci_status: 0x%x\n", pci_status); + writel(pci_status, mmio + PDC_CTL_STATUS); + readl(mmio + PDC_CTL_STATUS); + + /* + Read SPD of DIMM by I2C interface, + and program the DIMM Module Controller. + */ + if (!(speed = pdc20621_detect_dimm(pe))) { + printk(KERN_ERR "Detect Local DIMM Fail\n"); + return 1; /* DIMM error */ + } + VPRINTK("Local DIMM Speed = %d\n", speed); + + /* Programming DIMM0 Module Control Register (index_CID0:80h) */ + size = pdc20621_prog_dimm0(pe); + VPRINTK("Local DIMM Size = %dMB\n",size); + + /* Programming DIMM Module Global Control Register (index_CID0:88h) */ + if (pdc20621_prog_dimm_global(pe)) { + printk(KERN_ERR "Programming DIMM Module Global Control Register Fail\n"); + return 1; + } + +#ifdef ATA_VERBOSE_DEBUG + { + u8 test_parttern1[40] = {0x55,0xAA,'P','r','o','m','i','s','e',' ', + 'N','o','t',' ','Y','e','t',' ','D','e','f','i','n','e','d',' ', + '1','.','1','0', + '9','8','0','3','1','6','1','2',0,0}; + u8 test_parttern2[40] = {0}; + + pdc20621_put_to_dimm(pe, (void *) test_parttern2, 0x10040, 40); + pdc20621_put_to_dimm(pe, (void *) test_parttern2, 0x40, 40); + + pdc20621_put_to_dimm(pe, (void *) test_parttern1, 0x10040, 40); + pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x40, 40); + printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], + test_parttern2[1], &(test_parttern2[2])); + pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x10040, + 40); + printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], + test_parttern2[1], &(test_parttern2[2])); + + pdc20621_put_to_dimm(pe, (void *) test_parttern1, 0x40, 40); + pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x40, 40); + printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], + test_parttern2[1], &(test_parttern2[2])); + } +#endif + + /* ECC initiliazation. */ + + pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, + PDC_DIMM_SPD_TYPE, &spd0); + if (spd0 == 0x02) { + VPRINTK("Start ECC initialization\n"); + addr = 0; + length = size * 1024 * 1024; + while (addr < length) { + pdc20621_put_to_dimm(pe, (void *) &tmp, addr, + sizeof(u32)); + addr += sizeof(u32); + } + VPRINTK("Finish ECC initialization\n"); + } + return 0; +} + + +static void pdc_20621_init(struct ata_probe_ent *pe) +{ + u32 tmp; + void __iomem *mmio = pe->mmio_base; + + /* hard-code chip #0 */ + mmio += PDC_CHIP0_OFS; + + /* + * Select page 0x40 for our 32k DIMM window + */ + tmp = readl(mmio + PDC_20621_DIMM_WINDOW) & 0xffff0000; + tmp |= PDC_PAGE_WINDOW; /* page 40h; arbitrarily selected */ + writel(tmp, mmio + PDC_20621_DIMM_WINDOW); + + /* + * Reset Host DMA + */ + tmp = readl(mmio + PDC_HDMA_CTLSTAT); + tmp |= PDC_RESET; + writel(tmp, mmio + PDC_HDMA_CTLSTAT); + readl(mmio + PDC_HDMA_CTLSTAT); /* flush */ + + udelay(10); + + tmp = readl(mmio + PDC_HDMA_CTLSTAT); + tmp &= ~PDC_RESET; + writel(tmp, mmio + PDC_HDMA_CTLSTAT); + readl(mmio + PDC_HDMA_CTLSTAT); /* flush */ +} + +static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + struct ata_probe_ent *probe_ent = NULL; + unsigned long base; + void __iomem *mmio_base; + void __iomem *dimm_mmio = NULL; + struct pdc_host_priv *hpriv = NULL; + unsigned int board_idx = (unsigned int) ent->driver_data; + int pci_dev_busy = 0; + int rc; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) { + pci_dev_busy = 1; + goto err_out; + } + + rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + + probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); + if (probe_ent == NULL) { + rc = -ENOMEM; + goto err_out_regions; + } + + memset(probe_ent, 0, sizeof(*probe_ent)); + probe_ent->dev = pci_dev_to_dev(pdev); + INIT_LIST_HEAD(&probe_ent->node); + + mmio_base = pci_iomap(pdev, 3, 0); + if (mmio_base == NULL) { + rc = -ENOMEM; + goto err_out_free_ent; + } + base = (unsigned long) mmio_base; + + hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) { + rc = -ENOMEM; + goto err_out_iounmap; + } + memset(hpriv, 0, sizeof(*hpriv)); + + dimm_mmio = pci_iomap(pdev, 4, 0); + if (!dimm_mmio) { + kfree(hpriv); + rc = -ENOMEM; + goto err_out_iounmap; + } + + hpriv->dimm_mmio = dimm_mmio; + + probe_ent->sht = pdc_port_info[board_idx].sht; + probe_ent->host_flags = pdc_port_info[board_idx].host_flags; + probe_ent->pio_mask = pdc_port_info[board_idx].pio_mask; + probe_ent->mwdma_mask = pdc_port_info[board_idx].mwdma_mask; + probe_ent->udma_mask = pdc_port_info[board_idx].udma_mask; + probe_ent->port_ops = pdc_port_info[board_idx].port_ops; + + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = IRQF_SHARED; + probe_ent->mmio_base = mmio_base; + + probe_ent->private_data = hpriv; + base += PDC_CHIP0_OFS; + + probe_ent->n_ports = 4; + pdc_sata_setup_port(&probe_ent->port[0], base + 0x200); + pdc_sata_setup_port(&probe_ent->port[1], base + 0x280); + pdc_sata_setup_port(&probe_ent->port[2], base + 0x300); + pdc_sata_setup_port(&probe_ent->port[3], base + 0x380); + + pci_set_master(pdev); + + /* initialize adapter */ + /* initialize local dimm */ + if (pdc20621_dimm_init(probe_ent)) { + rc = -ENOMEM; + goto err_out_iounmap_dimm; + } + pdc_20621_init(probe_ent); + + /* FIXME: check ata_device_add return value */ + ata_device_add(probe_ent); + kfree(probe_ent); + + return 0; + +err_out_iounmap_dimm: /* only get to this label if 20621 */ + kfree(hpriv); + pci_iounmap(pdev, dimm_mmio); +err_out_iounmap: + pci_iounmap(pdev, mmio_base); +err_out_free_ent: + kfree(probe_ent); +err_out_regions: + pci_release_regions(pdev); +err_out: + if (!pci_dev_busy) + pci_disable_device(pdev); + return rc; +} + + +static int __init pdc_sata_init(void) +{ + return pci_register_driver(&pdc_sata_pci_driver); +} + + +static void __exit pdc_sata_exit(void) +{ + pci_unregister_driver(&pdc_sata_pci_driver); +} + + +MODULE_AUTHOR("Jeff Garzik"); +MODULE_DESCRIPTION("Promise SATA low-level driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, pdc_sata_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +module_init(pdc_sata_init); +module_exit(pdc_sata_exit); diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c new file mode 100644 index 00000000000..654aae2b25c --- /dev/null +++ b/drivers/ata/sata_uli.c @@ -0,0 +1,300 @@ +/* + * sata_uli.c - ULi Electronics SATA + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available under NDA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "sata_uli" +#define DRV_VERSION "1.0" + +enum { + uli_5289 = 0, + uli_5287 = 1, + uli_5281 = 2, + + uli_max_ports = 4, + + /* PCI configuration registers */ + ULI5287_BASE = 0x90, /* sata0 phy SCR registers */ + ULI5287_OFFS = 0x10, /* offset from sata0->sata1 phy regs */ + ULI5281_BASE = 0x60, /* sata0 phy SCR registers */ + ULI5281_OFFS = 0x60, /* offset from sata0->sata1 phy regs */ +}; + +struct uli_priv { + unsigned int scr_cfg_addr[uli_max_ports]; +}; + +static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); +static u32 uli_scr_read (struct ata_port *ap, unsigned int sc_reg); +static void uli_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); + +static const struct pci_device_id uli_pci_tbl[] = { + { PCI_VENDOR_ID_AL, 0x5289, PCI_ANY_ID, PCI_ANY_ID, 0, 0, uli_5289 }, + { PCI_VENDOR_ID_AL, 0x5287, PCI_ANY_ID, PCI_ANY_ID, 0, 0, uli_5287 }, + { PCI_VENDOR_ID_AL, 0x5281, PCI_ANY_ID, PCI_ANY_ID, 0, 0, uli_5281 }, + { } /* terminate list */ +}; + + +static struct pci_driver uli_pci_driver = { + .name = DRV_NAME, + .id_table = uli_pci_tbl, + .probe = uli_init_one, + .remove = ata_pci_remove_one, +}; + +static struct scsi_host_template uli_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations uli_ops = { + .port_disable = ata_port_disable, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .scr_read = uli_scr_read, + .scr_write = uli_scr_write, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + +static struct ata_port_info uli_port_info = { + .sht = &uli_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &uli_ops, +}; + + +MODULE_AUTHOR("Peer Chen"); +MODULE_DESCRIPTION("low-level driver for ULi Electronics SATA controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, uli_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg) +{ + struct uli_priv *hpriv = ap->host_set->private_data; + return hpriv->scr_cfg_addr[ap->port_no] + (4 * sc_reg); +} + +static u32 uli_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg) +{ + struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + unsigned int cfg_addr = get_scr_cfg_addr(ap, sc_reg); + u32 val; + + pci_read_config_dword(pdev, cfg_addr, &val); + return val; +} + +static void uli_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val) +{ + struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + unsigned int cfg_addr = get_scr_cfg_addr(ap, scr); + + pci_write_config_dword(pdev, cfg_addr, val); +} + +static u32 uli_scr_read (struct ata_port *ap, unsigned int sc_reg) +{ + if (sc_reg > SCR_CONTROL) + return 0xffffffffU; + + return uli_scr_cfg_read(ap, sc_reg); +} + +static void uli_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) +{ + if (sc_reg > SCR_CONTROL) //SCR_CONTROL=2, SCR_ERROR=1, SCR_STATUS=0 + return; + + uli_scr_cfg_write(ap, sc_reg, val); +} + +static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + struct ata_probe_ent *probe_ent; + struct ata_port_info *ppi; + int rc; + unsigned int board_idx = (unsigned int) ent->driver_data; + int pci_dev_busy = 0; + struct uli_priv *hpriv; + + if (!printed_version++) + dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n"); + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) { + pci_dev_busy = 1; + goto err_out; + } + + rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + + ppi = &uli_port_info; + probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); + if (!probe_ent) { + rc = -ENOMEM; + goto err_out_regions; + } + + hpriv = kzalloc(sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) { + rc = -ENOMEM; + goto err_out_probe_ent; + } + + probe_ent->private_data = hpriv; + + switch (board_idx) { + case uli_5287: + hpriv->scr_cfg_addr[0] = ULI5287_BASE; + hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS; + probe_ent->n_ports = 4; + + probe_ent->port[2].cmd_addr = pci_resource_start(pdev, 0) + 8; + probe_ent->port[2].altstatus_addr = + probe_ent->port[2].ctl_addr = + (pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS) + 4; + probe_ent->port[2].bmdma_addr = pci_resource_start(pdev, 4) + 16; + hpriv->scr_cfg_addr[2] = ULI5287_BASE + ULI5287_OFFS*4; + + probe_ent->port[3].cmd_addr = pci_resource_start(pdev, 2) + 8; + probe_ent->port[3].altstatus_addr = + probe_ent->port[3].ctl_addr = + (pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS) + 4; + probe_ent->port[3].bmdma_addr = pci_resource_start(pdev, 4) + 24; + hpriv->scr_cfg_addr[3] = ULI5287_BASE + ULI5287_OFFS*5; + + ata_std_ports(&probe_ent->port[2]); + ata_std_ports(&probe_ent->port[3]); + break; + + case uli_5289: + hpriv->scr_cfg_addr[0] = ULI5287_BASE; + hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS; + break; + + case uli_5281: + hpriv->scr_cfg_addr[0] = ULI5281_BASE; + hpriv->scr_cfg_addr[1] = ULI5281_BASE + ULI5281_OFFS; + break; + + default: + BUG(); + break; + } + + pci_set_master(pdev); + pci_intx(pdev, 1); + + /* FIXME: check ata_device_add return value */ + ata_device_add(probe_ent); + kfree(probe_ent); + + return 0; + +err_out_probe_ent: + kfree(probe_ent); +err_out_regions: + pci_release_regions(pdev); +err_out: + if (!pci_dev_busy) + pci_disable_device(pdev); + return rc; + +} + +static int __init uli_init(void) +{ + return pci_register_driver(&uli_pci_driver); +} + +static void __exit uli_exit(void) +{ + pci_unregister_driver(&uli_pci_driver); +} + + +module_init(uli_init); +module_exit(uli_exit); diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c new file mode 100644 index 00000000000..0bf1dbea640 --- /dev/null +++ b/drivers/ata/sata_via.c @@ -0,0 +1,394 @@ +/* + * sata_via.c - VIA Serial ATA controllers + * + * Maintained by: Jeff Garzik + * Please ALWAYS copy linux-ide@vger.kernel.org + on emails. + * + * Copyright 2003-2004 Red Hat, Inc. All rights reserved. + * Copyright 2003-2004 Jeff Garzik + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available under NDA. + * + * + * To-do list: + * - VT6421 PATA support + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "sata_via" +#define DRV_VERSION "2.0" + +enum board_ids_enum { + vt6420, + vt6421, +}; + +enum { + SATA_CHAN_ENAB = 0x40, /* SATA channel enable */ + SATA_INT_GATE = 0x41, /* SATA interrupt gating */ + SATA_NATIVE_MODE = 0x42, /* Native mode enable */ + SATA_PATA_SHARING = 0x49, /* PATA/SATA sharing func ctrl */ + + PORT0 = (1 << 1), + PORT1 = (1 << 0), + ALL_PORTS = PORT0 | PORT1, + N_PORTS = 2, + + NATIVE_MODE_ALL = (1 << 7) | (1 << 6) | (1 << 5) | (1 << 4), + + SATA_EXT_PHY = (1 << 6), /* 0==use PATA, 1==ext phy */ + SATA_2DEV = (1 << 5), /* SATA is master/slave */ +}; + +static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); +static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg); +static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); + +static const struct pci_device_id svia_pci_tbl[] = { + { 0x1106, 0x3149, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6420 }, + { 0x1106, 0x3249, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6421 }, + + { } /* terminate list */ +}; + +static struct pci_driver svia_pci_driver = { + .name = DRV_NAME, + .id_table = svia_pci_tbl, + .probe = svia_init_one, + .remove = ata_pci_remove_one, +}; + +static struct scsi_host_template svia_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations svia_sata_ops = { + .port_disable = ata_port_disable, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .scr_read = svia_scr_read, + .scr_write = svia_scr_write, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + +static struct ata_port_info svia_port_info = { + .sht = &svia_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, + .port_ops = &svia_sata_ops, +}; + +MODULE_AUTHOR("Jeff Garzik"); +MODULE_DESCRIPTION("SCSI low-level driver for VIA SATA controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, svia_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg) +{ + if (sc_reg > SCR_CONTROL) + return 0xffffffffU; + return inl(ap->ioaddr.scr_addr + (4 * sc_reg)); +} + +static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) +{ + if (sc_reg > SCR_CONTROL) + return; + outl(val, ap->ioaddr.scr_addr + (4 * sc_reg)); +} + +static const unsigned int svia_bar_sizes[] = { + 8, 4, 8, 4, 16, 256 +}; + +static const unsigned int vt6421_bar_sizes[] = { + 16, 16, 16, 16, 32, 128 +}; + +static unsigned long svia_scr_addr(unsigned long addr, unsigned int port) +{ + return addr + (port * 128); +} + +static unsigned long vt6421_scr_addr(unsigned long addr, unsigned int port) +{ + return addr + (port * 64); +} + +static void vt6421_init_addrs(struct ata_probe_ent *probe_ent, + struct pci_dev *pdev, + unsigned int port) +{ + unsigned long reg_addr = pci_resource_start(pdev, port); + unsigned long bmdma_addr = pci_resource_start(pdev, 4) + (port * 8); + unsigned long scr_addr; + + probe_ent->port[port].cmd_addr = reg_addr; + probe_ent->port[port].altstatus_addr = + probe_ent->port[port].ctl_addr = (reg_addr + 8) | ATA_PCI_CTL_OFS; + probe_ent->port[port].bmdma_addr = bmdma_addr; + + scr_addr = vt6421_scr_addr(pci_resource_start(pdev, 5), port); + probe_ent->port[port].scr_addr = scr_addr; + + ata_std_ports(&probe_ent->port[port]); +} + +static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev) +{ + struct ata_probe_ent *probe_ent; + struct ata_port_info *ppi = &svia_port_info; + + probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); + if (!probe_ent) + return NULL; + + probe_ent->port[0].scr_addr = + svia_scr_addr(pci_resource_start(pdev, 5), 0); + probe_ent->port[1].scr_addr = + svia_scr_addr(pci_resource_start(pdev, 5), 1); + + return probe_ent; +} + +static struct ata_probe_ent *vt6421_init_probe_ent(struct pci_dev *pdev) +{ + struct ata_probe_ent *probe_ent; + unsigned int i; + + probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); + if (!probe_ent) + return NULL; + + memset(probe_ent, 0, sizeof(*probe_ent)); + probe_ent->dev = pci_dev_to_dev(pdev); + INIT_LIST_HEAD(&probe_ent->node); + + probe_ent->sht = &svia_sht; + probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY; + probe_ent->port_ops = &svia_sata_ops; + probe_ent->n_ports = N_PORTS; + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = IRQF_SHARED; + probe_ent->pio_mask = 0x1f; + probe_ent->mwdma_mask = 0x07; + probe_ent->udma_mask = 0x7f; + + for (i = 0; i < N_PORTS; i++) + vt6421_init_addrs(probe_ent, pdev, i); + + return probe_ent; +} + +static void svia_configure(struct pci_dev *pdev) +{ + u8 tmp8; + + pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8); + dev_printk(KERN_INFO, &pdev->dev, "routed to hard irq line %d\n", + (int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f); + + /* make sure SATA channels are enabled */ + pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8); + if ((tmp8 & ALL_PORTS) != ALL_PORTS) { + dev_printk(KERN_DEBUG, &pdev->dev, + "enabling SATA channels (0x%x)\n", + (int) tmp8); + tmp8 |= ALL_PORTS; + pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8); + } + + /* make sure interrupts for each channel sent to us */ + pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8); + if ((tmp8 & ALL_PORTS) != ALL_PORTS) { + dev_printk(KERN_DEBUG, &pdev->dev, + "enabling SATA channel interrupts (0x%x)\n", + (int) tmp8); + tmp8 |= ALL_PORTS; + pci_write_config_byte(pdev, SATA_INT_GATE, tmp8); + } + + /* make sure native mode is enabled */ + pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8); + if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) { + dev_printk(KERN_DEBUG, &pdev->dev, + "enabling SATA channel native mode (0x%x)\n", + (int) tmp8); + tmp8 |= NATIVE_MODE_ALL; + pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8); + } +} + +static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + unsigned int i; + int rc; + struct ata_probe_ent *probe_ent; + int board_id = (int) ent->driver_data; + const int *bar_sizes; + int pci_dev_busy = 0; + u8 tmp8; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) { + pci_dev_busy = 1; + goto err_out; + } + + if (board_id == vt6420) { + pci_read_config_byte(pdev, SATA_PATA_SHARING, &tmp8); + if (tmp8 & SATA_2DEV) { + dev_printk(KERN_ERR, &pdev->dev, + "SATA master/slave not supported (0x%x)\n", + (int) tmp8); + rc = -EIO; + goto err_out_regions; + } + + bar_sizes = &svia_bar_sizes[0]; + } else { + bar_sizes = &vt6421_bar_sizes[0]; + } + + for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++) + if ((pci_resource_start(pdev, i) == 0) || + (pci_resource_len(pdev, i) < bar_sizes[i])) { + dev_printk(KERN_ERR, &pdev->dev, + "invalid PCI BAR %u (sz 0x%llx, val 0x%llx)\n", + i, + (unsigned long long)pci_resource_start(pdev, i), + (unsigned long long)pci_resource_len(pdev, i)); + rc = -ENODEV; + goto err_out_regions; + } + + rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + + if (board_id == vt6420) + probe_ent = vt6420_init_probe_ent(pdev); + else + probe_ent = vt6421_init_probe_ent(pdev); + + if (!probe_ent) { + dev_printk(KERN_ERR, &pdev->dev, "out of memory\n"); + rc = -ENOMEM; + goto err_out_regions; + } + + svia_configure(pdev); + + pci_set_master(pdev); + + /* FIXME: check ata_device_add return value */ + ata_device_add(probe_ent); + kfree(probe_ent); + + return 0; + +err_out_regions: + pci_release_regions(pdev); +err_out: + if (!pci_dev_busy) + pci_disable_device(pdev); + return rc; +} + +static int __init svia_init(void) +{ + return pci_register_driver(&svia_pci_driver); +} + +static void __exit svia_exit(void) +{ + pci_unregister_driver(&svia_pci_driver); +} + +module_init(svia_init); +module_exit(svia_exit); + diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c new file mode 100644 index 00000000000..4c69a705a48 --- /dev/null +++ b/drivers/ata/sata_vsc.c @@ -0,0 +1,482 @@ +/* + * sata_vsc.c - Vitesse VSC7174 4 port DPA SATA + * + * Maintained by: Jeremy Higdon @ SGI + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2004 SGI + * + * Bits from Jeff Garzik, Copyright RedHat, Inc. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Vitesse hardware documentation presumably available under NDA. + * Intel 31244 (same hardware interface) documentation presumably + * available from http://developer.intel.com/ + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "sata_vsc" +#define DRV_VERSION "2.0" + +enum { + /* Interrupt register offsets (from chip base address) */ + VSC_SATA_INT_STAT_OFFSET = 0x00, + VSC_SATA_INT_MASK_OFFSET = 0x04, + + /* Taskfile registers offsets */ + VSC_SATA_TF_CMD_OFFSET = 0x00, + VSC_SATA_TF_DATA_OFFSET = 0x00, + VSC_SATA_TF_ERROR_OFFSET = 0x04, + VSC_SATA_TF_FEATURE_OFFSET = 0x06, + VSC_SATA_TF_NSECT_OFFSET = 0x08, + VSC_SATA_TF_LBAL_OFFSET = 0x0c, + VSC_SATA_TF_LBAM_OFFSET = 0x10, + VSC_SATA_TF_LBAH_OFFSET = 0x14, + VSC_SATA_TF_DEVICE_OFFSET = 0x18, + VSC_SATA_TF_STATUS_OFFSET = 0x1c, + VSC_SATA_TF_COMMAND_OFFSET = 0x1d, + VSC_SATA_TF_ALTSTATUS_OFFSET = 0x28, + VSC_SATA_TF_CTL_OFFSET = 0x29, + + /* DMA base */ + VSC_SATA_UP_DESCRIPTOR_OFFSET = 0x64, + VSC_SATA_UP_DATA_BUFFER_OFFSET = 0x6C, + VSC_SATA_DMA_CMD_OFFSET = 0x70, + + /* SCRs base */ + VSC_SATA_SCR_STATUS_OFFSET = 0x100, + VSC_SATA_SCR_ERROR_OFFSET = 0x104, + VSC_SATA_SCR_CONTROL_OFFSET = 0x108, + + /* Port stride */ + VSC_SATA_PORT_OFFSET = 0x200, + + /* Error interrupt status bit offsets */ + VSC_SATA_INT_ERROR_CRC = 0x40, + VSC_SATA_INT_ERROR_T = 0x20, + VSC_SATA_INT_ERROR_P = 0x10, + VSC_SATA_INT_ERROR_R = 0x8, + VSC_SATA_INT_ERROR_E = 0x4, + VSC_SATA_INT_ERROR_M = 0x2, + VSC_SATA_INT_PHY_CHANGE = 0x1, + VSC_SATA_INT_ERROR = (VSC_SATA_INT_ERROR_CRC | VSC_SATA_INT_ERROR_T | \ + VSC_SATA_INT_ERROR_P | VSC_SATA_INT_ERROR_R | \ + VSC_SATA_INT_ERROR_E | VSC_SATA_INT_ERROR_M | \ + VSC_SATA_INT_PHY_CHANGE), +}; + + +#define is_vsc_sata_int_err(port_idx, int_status) \ + (int_status & (VSC_SATA_INT_ERROR << (8 * port_idx))) + + +static u32 vsc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) +{ + if (sc_reg > SCR_CONTROL) + return 0xffffffffU; + return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); +} + + +static void vsc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, + u32 val) +{ + if (sc_reg > SCR_CONTROL) + return; + writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); +} + + +static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl) +{ + void __iomem *mask_addr; + u8 mask; + + mask_addr = ap->host_set->mmio_base + + VSC_SATA_INT_MASK_OFFSET + ap->port_no; + mask = readb(mask_addr); + if (ctl & ATA_NIEN) + mask |= 0x80; + else + mask &= 0x7F; + writeb(mask, mask_addr); +} + + +static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + + /* + * The only thing the ctl register is used for is SRST. + * That is not enabled or disabled via tf_load. + * However, if ATA_NIEN is changed, then we need to change the interrupt register. + */ + if ((tf->ctl & ATA_NIEN) != (ap->last_ctl & ATA_NIEN)) { + ap->last_ctl = tf->ctl; + vsc_intr_mask_update(ap, tf->ctl & ATA_NIEN); + } + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + writew(tf->feature | (((u16)tf->hob_feature) << 8), ioaddr->feature_addr); + writew(tf->nsect | (((u16)tf->hob_nsect) << 8), ioaddr->nsect_addr); + writew(tf->lbal | (((u16)tf->hob_lbal) << 8), ioaddr->lbal_addr); + writew(tf->lbam | (((u16)tf->hob_lbam) << 8), ioaddr->lbam_addr); + writew(tf->lbah | (((u16)tf->hob_lbah) << 8), ioaddr->lbah_addr); + } else if (is_addr) { + writew(tf->feature, ioaddr->feature_addr); + writew(tf->nsect, ioaddr->nsect_addr); + writew(tf->lbal, ioaddr->lbal_addr); + writew(tf->lbam, ioaddr->lbam_addr); + writew(tf->lbah, ioaddr->lbah_addr); + } + + if (tf->flags & ATA_TFLAG_DEVICE) + writeb(tf->device, ioaddr->device_addr); + + ata_wait_idle(ap); +} + + +static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + u16 nsect, lbal, lbam, lbah, feature; + + tf->command = ata_check_status(ap); + tf->device = readw(ioaddr->device_addr); + feature = readw(ioaddr->error_addr); + nsect = readw(ioaddr->nsect_addr); + lbal = readw(ioaddr->lbal_addr); + lbam = readw(ioaddr->lbam_addr); + lbah = readw(ioaddr->lbah_addr); + + tf->feature = feature; + tf->nsect = nsect; + tf->lbal = lbal; + tf->lbam = lbam; + tf->lbah = lbah; + + if (tf->flags & ATA_TFLAG_LBA48) { + tf->hob_feature = feature >> 8; + tf->hob_nsect = nsect >> 8; + tf->hob_lbal = lbal >> 8; + tf->hob_lbam = lbam >> 8; + tf->hob_lbah = lbah >> 8; + } +} + + +/* + * vsc_sata_interrupt + * + * Read the interrupt register and process for the devices that have them pending. + */ +static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance, + struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + unsigned int i; + unsigned int handled = 0; + u32 int_status; + + spin_lock(&host_set->lock); + + int_status = readl(host_set->mmio_base + VSC_SATA_INT_STAT_OFFSET); + + for (i = 0; i < host_set->n_ports; i++) { + if (int_status & ((u32) 0xFF << (8 * i))) { + struct ata_port *ap; + + ap = host_set->ports[i]; + + if (is_vsc_sata_int_err(i, int_status)) { + u32 err_status; + printk(KERN_DEBUG "%s: ignoring interrupt(s)\n", __FUNCTION__); + err_status = ap ? vsc_sata_scr_read(ap, SCR_ERROR) : 0; + vsc_sata_scr_write(ap, SCR_ERROR, err_status); + handled++; + } + + if (ap && !(ap->flags & ATA_FLAG_DISABLED)) { + struct ata_queued_cmd *qc; + + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) + handled += ata_host_intr(ap, qc); + else if (is_vsc_sata_int_err(i, int_status)) { + /* + * On some chips (i.e. Intel 31244), an error + * interrupt will sneak in at initialization + * time (phy state changes). Clearing the SCR + * error register is not required, but it prevents + * the phy state change interrupts from recurring + * later. + */ + u32 err_status; + err_status = vsc_sata_scr_read(ap, SCR_ERROR); + printk(KERN_DEBUG "%s: clearing interrupt, " + "status %x; sata err status %x\n", + __FUNCTION__, + int_status, err_status); + vsc_sata_scr_write(ap, SCR_ERROR, err_status); + /* Clear interrupt status */ + ata_chk_status(ap); + handled++; + } + } + } + } + + spin_unlock(&host_set->lock); + + return IRQ_RETVAL(handled); +} + + +static struct scsi_host_template vsc_sata_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, +}; + + +static const struct ata_port_operations vsc_sata_ops = { + .port_disable = ata_port_disable, + .tf_load = vsc_sata_tf_load, + .tf_read = vsc_sata_tf_read, + .exec_command = ata_exec_command, + .check_status = ata_check_status, + .dev_select = ata_std_dev_select, + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_mmio_data_xfer, + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .irq_handler = vsc_sata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .scr_read = vsc_sata_scr_read, + .scr_write = vsc_sata_scr_write, + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_pci_host_stop, +}; + +static void __devinit vsc_sata_setup_port(struct ata_ioports *port, unsigned long base) +{ + port->cmd_addr = base + VSC_SATA_TF_CMD_OFFSET; + port->data_addr = base + VSC_SATA_TF_DATA_OFFSET; + port->error_addr = base + VSC_SATA_TF_ERROR_OFFSET; + port->feature_addr = base + VSC_SATA_TF_FEATURE_OFFSET; + port->nsect_addr = base + VSC_SATA_TF_NSECT_OFFSET; + port->lbal_addr = base + VSC_SATA_TF_LBAL_OFFSET; + port->lbam_addr = base + VSC_SATA_TF_LBAM_OFFSET; + port->lbah_addr = base + VSC_SATA_TF_LBAH_OFFSET; + port->device_addr = base + VSC_SATA_TF_DEVICE_OFFSET; + port->status_addr = base + VSC_SATA_TF_STATUS_OFFSET; + port->command_addr = base + VSC_SATA_TF_COMMAND_OFFSET; + port->altstatus_addr = base + VSC_SATA_TF_ALTSTATUS_OFFSET; + port->ctl_addr = base + VSC_SATA_TF_CTL_OFFSET; + port->bmdma_addr = base + VSC_SATA_DMA_CMD_OFFSET; + port->scr_addr = base + VSC_SATA_SCR_STATUS_OFFSET; + writel(0, base + VSC_SATA_UP_DESCRIPTOR_OFFSET); + writel(0, base + VSC_SATA_UP_DATA_BUFFER_OFFSET); +} + + +static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + struct ata_probe_ent *probe_ent = NULL; + unsigned long base; + int pci_dev_busy = 0; + void __iomem *mmio_base; + int rc; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + /* + * Check if we have needed resource mapped. + */ + if (pci_resource_len(pdev, 0) == 0) { + rc = -ENODEV; + goto err_out; + } + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) { + pci_dev_busy = 1; + goto err_out; + } + + /* + * Use 32 bit DMA mask, because 64 bit address support is poor. + */ + rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) + goto err_out_regions; + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) + goto err_out_regions; + + probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); + if (probe_ent == NULL) { + rc = -ENOMEM; + goto err_out_regions; + } + memset(probe_ent, 0, sizeof(*probe_ent)); + probe_ent->dev = pci_dev_to_dev(pdev); + INIT_LIST_HEAD(&probe_ent->node); + + mmio_base = pci_iomap(pdev, 0, 0); + if (mmio_base == NULL) { + rc = -ENOMEM; + goto err_out_free_ent; + } + base = (unsigned long) mmio_base; + + /* + * Due to a bug in the chip, the default cache line size can't be used + */ + pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80); + + probe_ent->sht = &vsc_sata_sht; + probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO; + probe_ent->port_ops = &vsc_sata_ops; + probe_ent->n_ports = 4; + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = IRQF_SHARED; + probe_ent->mmio_base = mmio_base; + + /* We don't care much about the PIO/UDMA masks, but the core won't like us + * if we don't fill these + */ + probe_ent->pio_mask = 0x1f; + probe_ent->mwdma_mask = 0x07; + probe_ent->udma_mask = 0x7f; + + /* We have 4 ports per PCI function */ + vsc_sata_setup_port(&probe_ent->port[0], base + 1 * VSC_SATA_PORT_OFFSET); + vsc_sata_setup_port(&probe_ent->port[1], base + 2 * VSC_SATA_PORT_OFFSET); + vsc_sata_setup_port(&probe_ent->port[2], base + 3 * VSC_SATA_PORT_OFFSET); + vsc_sata_setup_port(&probe_ent->port[3], base + 4 * VSC_SATA_PORT_OFFSET); + + pci_set_master(pdev); + + /* + * Config offset 0x98 is "Extended Control and Status Register 0" + * Default value is (1 << 28). All bits except bit 28 are reserved in + * DPA mode. If bit 28 is set, LED 0 reflects all ports' activity. + * If bit 28 is clear, each port has its own LED. + */ + pci_write_config_dword(pdev, 0x98, 0); + + /* FIXME: check ata_device_add return value */ + ata_device_add(probe_ent); + kfree(probe_ent); + + return 0; + +err_out_free_ent: + kfree(probe_ent); +err_out_regions: + pci_release_regions(pdev); +err_out: + if (!pci_dev_busy) + pci_disable_device(pdev); + return rc; +} + + +static const struct pci_device_id vsc_sata_pci_tbl[] = { + { PCI_VENDOR_ID_VITESSE, 0x7174, + PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 }, + { PCI_VENDOR_ID_INTEL, 0x3200, + PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 }, + { } /* terminate list */ +}; + + +static struct pci_driver vsc_sata_pci_driver = { + .name = DRV_NAME, + .id_table = vsc_sata_pci_tbl, + .probe = vsc_sata_init_one, + .remove = ata_pci_remove_one, +}; + + +static int __init vsc_sata_init(void) +{ + return pci_register_driver(&vsc_sata_pci_driver); +} + + +static void __exit vsc_sata_exit(void) +{ + pci_unregister_driver(&vsc_sata_pci_driver); +} + + +MODULE_AUTHOR("Jeremy Higdon"); +MODULE_DESCRIPTION("low-level driver for Vitesse VSC7174 SATA controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, vsc_sata_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +module_init(vsc_sata_init); +module_exit(vsc_sata_exit); diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 96a81cd1761..2df4d15c963 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -471,67 +471,6 @@ config SCSI_IN2000 source "drivers/scsi/megaraid/Kconfig.megaraid" -config SCSI_SATA - tristate "Serial ATA (SATA) support" - depends on SCSI - help - This driver family supports Serial ATA host controllers - and devices. - - If unsure, say N. - -config SCSI_SATA_AHCI - tristate "AHCI SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for AHCI Serial ATA. - - If unsure, say N. - -config SCSI_SATA_SVW - tristate "ServerWorks Frodo / Apple K2 SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for Broadcom/Serverworks/Apple K2 - SATA support. - - If unsure, say N. - -config SCSI_ATA_PIIX - tristate "Intel PIIX/ICH SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for ICH5/6/7/8 Serial ATA. - If PATA support was enabled previously, this enables - support for select Intel PIIX/ICH PATA host controllers. - - If unsure, say N. - -config SCSI_SATA_MV - tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for the Marvell Serial ATA family. - Currently supports 88SX[56]0[48][01] chips. - - If unsure, say N. - -config SCSI_SATA_NV - tristate "NVIDIA SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for NVIDIA Serial ATA. - - If unsure, say N. - -config SCSI_PDC_ADMA - tristate "Pacific Digital ADMA support" - depends on SCSI_SATA && PCI - help - This option enables support for Pacific Digital ADMA controllers - - If unsure, say N. - config SCSI_HPTIOP tristate "HighPoint RocketRAID 3xxx Controller support" depends on SCSI && PCI @@ -542,83 +481,6 @@ config SCSI_HPTIOP To compile this driver as a module, choose M here; the module will be called hptiop. If unsure, say N. -config SCSI_SATA_QSTOR - tristate "Pacific Digital SATA QStor support" - depends on SCSI_SATA && PCI - help - This option enables support for Pacific Digital Serial ATA QStor. - - If unsure, say N. - -config SCSI_SATA_PROMISE - tristate "Promise SATA TX2/TX4 support" - depends on SCSI_SATA && PCI - help - This option enables support for Promise Serial ATA TX2/TX4. - - If unsure, say N. - -config SCSI_SATA_SX4 - tristate "Promise SATA SX4 support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for Promise Serial ATA SX4. - - If unsure, say N. - -config SCSI_SATA_SIL - tristate "Silicon Image SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for Silicon Image Serial ATA. - - If unsure, say N. - -config SCSI_SATA_SIL24 - tristate "Silicon Image 3124/3132 SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for Silicon Image 3124/3132 Serial ATA. - - If unsure, say N. - -config SCSI_SATA_SIS - tristate "SiS 964/180 SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for SiS Serial ATA 964/180. - - If unsure, say N. - -config SCSI_SATA_ULI - tristate "ULi Electronics SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for ULi Electronics SATA. - - If unsure, say N. - -config SCSI_SATA_VIA - tristate "VIA SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for VIA Serial ATA. - - If unsure, say N. - -config SCSI_SATA_VITESSE - tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. - - If unsure, say N. - -config SCSI_SATA_INTEL_COMBINED - bool - depends on IDE=y && !BLK_DEV_IDE_SATA && (SCSI_SATA_AHCI || SCSI_ATA_PIIX) - default y - config SCSI_BUSLOGIC tristate "BusLogic SCSI support" depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index ebd0cf00bf3..b678f957cfe 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -122,21 +122,6 @@ obj-$(CONFIG_SCSI_LASI700) += 53c700.o lasi700.o obj-$(CONFIG_SCSI_NSP32) += nsp32.o obj-$(CONFIG_SCSI_IPR) += ipr.o obj-$(CONFIG_SCSI_IBMVSCSI) += ibmvscsi/ -obj-$(CONFIG_SCSI_SATA_AHCI) += libata.o ahci.o -obj-$(CONFIG_SCSI_SATA_SVW) += libata.o sata_svw.o -obj-$(CONFIG_SCSI_ATA_PIIX) += libata.o ata_piix.o -obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o -obj-$(CONFIG_SCSI_SATA_QSTOR) += libata.o sata_qstor.o -obj-$(CONFIG_SCSI_SATA_SIL) += libata.o sata_sil.o -obj-$(CONFIG_SCSI_SATA_SIL24) += libata.o sata_sil24.o -obj-$(CONFIG_SCSI_SATA_VIA) += libata.o sata_via.o -obj-$(CONFIG_SCSI_SATA_VITESSE) += libata.o sata_vsc.o -obj-$(CONFIG_SCSI_SATA_SIS) += libata.o sata_sis.o -obj-$(CONFIG_SCSI_SATA_SX4) += libata.o sata_sx4.o -obj-$(CONFIG_SCSI_SATA_NV) += libata.o sata_nv.o -obj-$(CONFIG_SCSI_SATA_ULI) += libata.o sata_uli.o -obj-$(CONFIG_SCSI_SATA_MV) += libata.o sata_mv.o -obj-$(CONFIG_SCSI_PDC_ADMA) += libata.o pdc_adma.o obj-$(CONFIG_SCSI_HPTIOP) += hptiop.o obj-$(CONFIG_ARM) += arm/ @@ -166,7 +151,6 @@ ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \ CFLAGS_ncr53c8xx.o := $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m) zalon7xx-objs := zalon.o ncr53c8xx.o NCR_Q720_mod-objs := NCR_Q720.o ncr53c8xx.o -libata-objs := libata-core.o libata-scsi.o libata-bmdma.o libata-eh.o oktagon_esp_mod-objs := oktagon_esp.o oktagon_io.o # Files generated that shall be removed upon make clean diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c deleted file mode 100644 index 813031c01fb..00000000000 --- a/drivers/scsi/ahci.c +++ /dev/null @@ -1,1684 +0,0 @@ -/* - * ahci.c - AHCI SATA support - * - * Maintained by: Jeff Garzik - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * Copyright 2004-2005 Red Hat, Inc. - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * AHCI hardware documentation: - * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf - * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "ahci" -#define DRV_VERSION "2.0" - - -enum { - AHCI_PCI_BAR = 5, - AHCI_MAX_SG = 168, /* hardware max is 64K */ - AHCI_DMA_BOUNDARY = 0xffffffff, - AHCI_USE_CLUSTERING = 0, - AHCI_MAX_CMDS = 32, - AHCI_CMD_SZ = 32, - AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ, - AHCI_RX_FIS_SZ = 256, - AHCI_CMD_TBL_CDB = 0x40, - AHCI_CMD_TBL_HDR_SZ = 0x80, - AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16), - AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS, - AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + - AHCI_RX_FIS_SZ, - AHCI_IRQ_ON_SG = (1 << 31), - AHCI_CMD_ATAPI = (1 << 5), - AHCI_CMD_WRITE = (1 << 6), - AHCI_CMD_PREFETCH = (1 << 7), - AHCI_CMD_RESET = (1 << 8), - AHCI_CMD_CLR_BUSY = (1 << 10), - - RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */ - RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */ - - board_ahci = 0, - board_ahci_vt8251 = 1, - - /* global controller registers */ - HOST_CAP = 0x00, /* host capabilities */ - HOST_CTL = 0x04, /* global host control */ - HOST_IRQ_STAT = 0x08, /* interrupt status */ - HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */ - HOST_VERSION = 0x10, /* AHCI spec. version compliancy */ - - /* HOST_CTL bits */ - HOST_RESET = (1 << 0), /* reset controller; self-clear */ - HOST_IRQ_EN = (1 << 1), /* global IRQ enable */ - HOST_AHCI_EN = (1 << 31), /* AHCI enabled */ - - /* HOST_CAP bits */ - HOST_CAP_SSC = (1 << 14), /* Slumber capable */ - HOST_CAP_CLO = (1 << 24), /* Command List Override support */ - HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */ - HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */ - HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */ - - /* registers for each SATA port */ - PORT_LST_ADDR = 0x00, /* command list DMA addr */ - PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */ - PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */ - PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */ - PORT_IRQ_STAT = 0x10, /* interrupt status */ - PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */ - PORT_CMD = 0x18, /* port command */ - PORT_TFDATA = 0x20, /* taskfile data */ - PORT_SIG = 0x24, /* device TF signature */ - PORT_CMD_ISSUE = 0x38, /* command issue */ - PORT_SCR = 0x28, /* SATA phy register block */ - PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */ - PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */ - PORT_SCR_ERR = 0x30, /* SATA phy register: SError */ - PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */ - - /* PORT_IRQ_{STAT,MASK} bits */ - PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */ - PORT_IRQ_TF_ERR = (1 << 30), /* task file error */ - PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */ - PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */ - PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */ - PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */ - PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */ - PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */ - - PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */ - PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */ - PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */ - PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */ - PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */ - PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */ - PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */ - PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */ - PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */ - - PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR | - PORT_IRQ_IF_ERR | - PORT_IRQ_CONNECT | - PORT_IRQ_PHYRDY | - PORT_IRQ_UNK_FIS, - PORT_IRQ_ERROR = PORT_IRQ_FREEZE | - PORT_IRQ_TF_ERR | - PORT_IRQ_HBUS_DATA_ERR, - DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | - PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | - PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS, - - /* PORT_CMD bits */ - PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */ - PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */ - PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */ - PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */ - PORT_CMD_CLO = (1 << 3), /* Command list override */ - PORT_CMD_POWER_ON = (1 << 2), /* Power up device */ - PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */ - PORT_CMD_START = (1 << 0), /* Enable port DMA engine */ - - PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */ - PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */ - PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */ - PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */ - - /* hpriv->flags bits */ - AHCI_FLAG_MSI = (1 << 0), - - /* ap->flags bits */ - AHCI_FLAG_RESET_NEEDS_CLO = (1 << 24), - AHCI_FLAG_NO_NCQ = (1 << 25), -}; - -struct ahci_cmd_hdr { - u32 opts; - u32 status; - u32 tbl_addr; - u32 tbl_addr_hi; - u32 reserved[4]; -}; - -struct ahci_sg { - u32 addr; - u32 addr_hi; - u32 reserved; - u32 flags_size; -}; - -struct ahci_host_priv { - unsigned long flags; - u32 cap; /* cache of HOST_CAP register */ - u32 port_map; /* cache of HOST_PORTS_IMPL reg */ -}; - -struct ahci_port_priv { - struct ahci_cmd_hdr *cmd_slot; - dma_addr_t cmd_slot_dma; - void *cmd_tbl; - dma_addr_t cmd_tbl_dma; - void *rx_fis; - dma_addr_t rx_fis_dma; -}; - -static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg); -static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); -static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc); -static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *regs); -static void ahci_irq_clear(struct ata_port *ap); -static int ahci_port_start(struct ata_port *ap); -static void ahci_port_stop(struct ata_port *ap); -static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf); -static void ahci_qc_prep(struct ata_queued_cmd *qc); -static u8 ahci_check_status(struct ata_port *ap); -static void ahci_freeze(struct ata_port *ap); -static void ahci_thaw(struct ata_port *ap); -static void ahci_error_handler(struct ata_port *ap); -static void ahci_post_internal_cmd(struct ata_queued_cmd *qc); -static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg); -static int ahci_port_resume(struct ata_port *ap); -static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); -static int ahci_pci_device_resume(struct pci_dev *pdev); -static void ahci_remove_one (struct pci_dev *pdev); - -static struct scsi_host_template ahci_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .change_queue_depth = ata_scsi_change_queue_depth, - .can_queue = AHCI_MAX_CMDS - 1, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = AHCI_MAX_SG, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = AHCI_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = AHCI_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, - .suspend = ata_scsi_device_suspend, - .resume = ata_scsi_device_resume, -}; - -static const struct ata_port_operations ahci_ops = { - .port_disable = ata_port_disable, - - .check_status = ahci_check_status, - .check_altstatus = ahci_check_status, - .dev_select = ata_noop_dev_select, - - .tf_read = ahci_tf_read, - - .qc_prep = ahci_qc_prep, - .qc_issue = ahci_qc_issue, - - .irq_handler = ahci_interrupt, - .irq_clear = ahci_irq_clear, - - .scr_read = ahci_scr_read, - .scr_write = ahci_scr_write, - - .freeze = ahci_freeze, - .thaw = ahci_thaw, - - .error_handler = ahci_error_handler, - .post_internal_cmd = ahci_post_internal_cmd, - - .port_suspend = ahci_port_suspend, - .port_resume = ahci_port_resume, - - .port_start = ahci_port_start, - .port_stop = ahci_port_stop, -}; - -static const struct ata_port_info ahci_port_info[] = { - /* board_ahci */ - { - .sht = &ahci_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | - ATA_FLAG_SKIP_D2H_BSY, - .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = 0x7f, /* udma0-6 ; FIXME */ - .port_ops = &ahci_ops, - }, - /* board_ahci_vt8251 */ - { - .sht = &ahci_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | - ATA_FLAG_SKIP_D2H_BSY | - AHCI_FLAG_RESET_NEEDS_CLO | AHCI_FLAG_NO_NCQ, - .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = 0x7f, /* udma0-6 ; FIXME */ - .port_ops = &ahci_ops, - }, -}; - -static const struct pci_device_id ahci_pci_tbl[] = { - /* Intel */ - { PCI_VENDOR_ID_INTEL, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ICH6 */ - { PCI_VENDOR_ID_INTEL, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ICH6M */ - { PCI_VENDOR_ID_INTEL, 0x27c1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ICH7 */ - { PCI_VENDOR_ID_INTEL, 0x27c5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ICH7M */ - { PCI_VENDOR_ID_INTEL, 0x27c3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ICH7R */ - { PCI_VENDOR_ID_AL, 0x5288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ULi M5288 */ - { PCI_VENDOR_ID_INTEL, 0x2681, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ESB2 */ - { PCI_VENDOR_ID_INTEL, 0x2682, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ESB2 */ - { PCI_VENDOR_ID_INTEL, 0x2683, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ESB2 */ - { PCI_VENDOR_ID_INTEL, 0x27c6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ICH7-M DH */ - { PCI_VENDOR_ID_INTEL, 0x2821, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ICH8 */ - { PCI_VENDOR_ID_INTEL, 0x2822, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ICH8 */ - { PCI_VENDOR_ID_INTEL, 0x2824, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ICH8 */ - { PCI_VENDOR_ID_INTEL, 0x2829, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ICH8M */ - { PCI_VENDOR_ID_INTEL, 0x282a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ICH8M */ - - /* JMicron */ - { 0x197b, 0x2360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* JMicron JMB360 */ - { 0x197b, 0x2361, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* JMicron JMB361 */ - { 0x197b, 0x2363, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* JMicron JMB363 */ - { 0x197b, 0x2365, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* JMicron JMB365 */ - { 0x197b, 0x2366, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* JMicron JMB366 */ - - /* ATI */ - { PCI_VENDOR_ID_ATI, 0x4380, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ATI SB600 non-raid */ - { PCI_VENDOR_ID_ATI, 0x4381, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ATI SB600 raid */ - - /* VIA */ - { PCI_VENDOR_ID_VIA, 0x3349, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci_vt8251 }, /* VIA VT8251 */ - - /* NVIDIA */ - { PCI_VENDOR_ID_NVIDIA, 0x044c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* MCP65 */ - { PCI_VENDOR_ID_NVIDIA, 0x044d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* MCP65 */ - { PCI_VENDOR_ID_NVIDIA, 0x044e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* MCP65 */ - { PCI_VENDOR_ID_NVIDIA, 0x044f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* MCP65 */ - - /* SiS */ - { PCI_VENDOR_ID_SI, 0x1184, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* SiS 966 */ - { PCI_VENDOR_ID_SI, 0x1185, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* SiS 966 */ - { PCI_VENDOR_ID_SI, 0x0186, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* SiS 968 */ - - { } /* terminate list */ -}; - - -static struct pci_driver ahci_pci_driver = { - .name = DRV_NAME, - .id_table = ahci_pci_tbl, - .probe = ahci_init_one, - .suspend = ahci_pci_device_suspend, - .resume = ahci_pci_device_resume, - .remove = ahci_remove_one, -}; - - -static inline unsigned long ahci_port_base_ul (unsigned long base, unsigned int port) -{ - return base + 0x100 + (port * 0x80); -} - -static inline void __iomem *ahci_port_base (void __iomem *base, unsigned int port) -{ - return (void __iomem *) ahci_port_base_ul((unsigned long)base, port); -} - -static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg_in) -{ - unsigned int sc_reg; - - switch (sc_reg_in) { - case SCR_STATUS: sc_reg = 0; break; - case SCR_CONTROL: sc_reg = 1; break; - case SCR_ERROR: sc_reg = 2; break; - case SCR_ACTIVE: sc_reg = 3; break; - default: - return 0xffffffffU; - } - - return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); -} - - -static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg_in, - u32 val) -{ - unsigned int sc_reg; - - switch (sc_reg_in) { - case SCR_STATUS: sc_reg = 0; break; - case SCR_CONTROL: sc_reg = 1; break; - case SCR_ERROR: sc_reg = 2; break; - case SCR_ACTIVE: sc_reg = 3; break; - default: - return; - } - - writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); -} - -static void ahci_start_engine(void __iomem *port_mmio) -{ - u32 tmp; - - /* start DMA */ - tmp = readl(port_mmio + PORT_CMD); - tmp |= PORT_CMD_START; - writel(tmp, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* flush */ -} - -static int ahci_stop_engine(void __iomem *port_mmio) -{ - u32 tmp; - - tmp = readl(port_mmio + PORT_CMD); - - /* check if the HBA is idle */ - if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0) - return 0; - - /* setting HBA to idle */ - tmp &= ~PORT_CMD_START; - writel(tmp, port_mmio + PORT_CMD); - - /* wait for engine to stop. This could be as long as 500 msec */ - tmp = ata_wait_register(port_mmio + PORT_CMD, - PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500); - if (tmp & PORT_CMD_LIST_ON) - return -EIO; - - return 0; -} - -static void ahci_start_fis_rx(void __iomem *port_mmio, u32 cap, - dma_addr_t cmd_slot_dma, dma_addr_t rx_fis_dma) -{ - u32 tmp; - - /* set FIS registers */ - if (cap & HOST_CAP_64) - writel((cmd_slot_dma >> 16) >> 16, port_mmio + PORT_LST_ADDR_HI); - writel(cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR); - - if (cap & HOST_CAP_64) - writel((rx_fis_dma >> 16) >> 16, port_mmio + PORT_FIS_ADDR_HI); - writel(rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR); - - /* enable FIS reception */ - tmp = readl(port_mmio + PORT_CMD); - tmp |= PORT_CMD_FIS_RX; - writel(tmp, port_mmio + PORT_CMD); - - /* flush */ - readl(port_mmio + PORT_CMD); -} - -static int ahci_stop_fis_rx(void __iomem *port_mmio) -{ - u32 tmp; - - /* disable FIS reception */ - tmp = readl(port_mmio + PORT_CMD); - tmp &= ~PORT_CMD_FIS_RX; - writel(tmp, port_mmio + PORT_CMD); - - /* wait for completion, spec says 500ms, give it 1000 */ - tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON, - PORT_CMD_FIS_ON, 10, 1000); - if (tmp & PORT_CMD_FIS_ON) - return -EBUSY; - - return 0; -} - -static void ahci_power_up(void __iomem *port_mmio, u32 cap) -{ - u32 cmd; - - cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK; - - /* spin up device */ - if (cap & HOST_CAP_SSS) { - cmd |= PORT_CMD_SPIN_UP; - writel(cmd, port_mmio + PORT_CMD); - } - - /* wake up link */ - writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD); -} - -static void ahci_power_down(void __iomem *port_mmio, u32 cap) -{ - u32 cmd, scontrol; - - cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK; - - if (cap & HOST_CAP_SSC) { - /* enable transitions to slumber mode */ - scontrol = readl(port_mmio + PORT_SCR_CTL); - if ((scontrol & 0x0f00) > 0x100) { - scontrol &= ~0xf00; - writel(scontrol, port_mmio + PORT_SCR_CTL); - } - - /* put device into slumber mode */ - writel(cmd | PORT_CMD_ICC_SLUMBER, port_mmio + PORT_CMD); - - /* wait for the transition to complete */ - ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_ICC_SLUMBER, - PORT_CMD_ICC_SLUMBER, 1, 50); - } - - /* put device into listen mode */ - if (cap & HOST_CAP_SSS) { - /* first set PxSCTL.DET to 0 */ - scontrol = readl(port_mmio + PORT_SCR_CTL); - scontrol &= ~0xf; - writel(scontrol, port_mmio + PORT_SCR_CTL); - - /* then set PxCMD.SUD to 0 */ - cmd &= ~PORT_CMD_SPIN_UP; - writel(cmd, port_mmio + PORT_CMD); - } -} - -static void ahci_init_port(void __iomem *port_mmio, u32 cap, - dma_addr_t cmd_slot_dma, dma_addr_t rx_fis_dma) -{ - /* power up */ - ahci_power_up(port_mmio, cap); - - /* enable FIS reception */ - ahci_start_fis_rx(port_mmio, cap, cmd_slot_dma, rx_fis_dma); - - /* enable DMA */ - ahci_start_engine(port_mmio); -} - -static int ahci_deinit_port(void __iomem *port_mmio, u32 cap, const char **emsg) -{ - int rc; - - /* disable DMA */ - rc = ahci_stop_engine(port_mmio); - if (rc) { - *emsg = "failed to stop engine"; - return rc; - } - - /* disable FIS reception */ - rc = ahci_stop_fis_rx(port_mmio); - if (rc) { - *emsg = "failed stop FIS RX"; - return rc; - } - - /* put device into slumber mode */ - ahci_power_down(port_mmio, cap); - - return 0; -} - -static int ahci_reset_controller(void __iomem *mmio, struct pci_dev *pdev) -{ - u32 cap_save, tmp; - - cap_save = readl(mmio + HOST_CAP); - cap_save &= ( (1<<28) | (1<<17) ); - cap_save |= (1 << 27); - - /* global controller reset */ - tmp = readl(mmio + HOST_CTL); - if ((tmp & HOST_RESET) == 0) { - writel(tmp | HOST_RESET, mmio + HOST_CTL); - readl(mmio + HOST_CTL); /* flush */ - } - - /* reset must complete within 1 second, or - * the hardware should be considered fried. - */ - ssleep(1); - - tmp = readl(mmio + HOST_CTL); - if (tmp & HOST_RESET) { - dev_printk(KERN_ERR, &pdev->dev, - "controller reset failed (0x%x)\n", tmp); - return -EIO; - } - - writel(HOST_AHCI_EN, mmio + HOST_CTL); - (void) readl(mmio + HOST_CTL); /* flush */ - writel(cap_save, mmio + HOST_CAP); - writel(0xf, mmio + HOST_PORTS_IMPL); - (void) readl(mmio + HOST_PORTS_IMPL); /* flush */ - - if (pdev->vendor == PCI_VENDOR_ID_INTEL) { - u16 tmp16; - - /* configure PCS */ - pci_read_config_word(pdev, 0x92, &tmp16); - tmp16 |= 0xf; - pci_write_config_word(pdev, 0x92, tmp16); - } - - return 0; -} - -static void ahci_init_controller(void __iomem *mmio, struct pci_dev *pdev, - int n_ports, u32 cap) -{ - int i, rc; - u32 tmp; - - for (i = 0; i < n_ports; i++) { - void __iomem *port_mmio = ahci_port_base(mmio, i); - const char *emsg = NULL; - -#if 0 /* BIOSen initialize this incorrectly */ - if (!(hpriv->port_map & (1 << i))) - continue; -#endif - - /* make sure port is not active */ - rc = ahci_deinit_port(port_mmio, cap, &emsg); - if (rc) - dev_printk(KERN_WARNING, &pdev->dev, - "%s (%d)\n", emsg, rc); - - /* clear SError */ - tmp = readl(port_mmio + PORT_SCR_ERR); - VPRINTK("PORT_SCR_ERR 0x%x\n", tmp); - writel(tmp, port_mmio + PORT_SCR_ERR); - - /* clear port IRQ */ - tmp = readl(port_mmio + PORT_IRQ_STAT); - VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp); - if (tmp) - writel(tmp, port_mmio + PORT_IRQ_STAT); - - writel(1 << i, mmio + HOST_IRQ_STAT); - } - - tmp = readl(mmio + HOST_CTL); - VPRINTK("HOST_CTL 0x%x\n", tmp); - writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL); - tmp = readl(mmio + HOST_CTL); - VPRINTK("HOST_CTL 0x%x\n", tmp); -} - -static unsigned int ahci_dev_classify(struct ata_port *ap) -{ - void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; - struct ata_taskfile tf; - u32 tmp; - - tmp = readl(port_mmio + PORT_SIG); - tf.lbah = (tmp >> 24) & 0xff; - tf.lbam = (tmp >> 16) & 0xff; - tf.lbal = (tmp >> 8) & 0xff; - tf.nsect = (tmp) & 0xff; - - return ata_dev_classify(&tf); -} - -static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, - u32 opts) -{ - dma_addr_t cmd_tbl_dma; - - cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ; - - pp->cmd_slot[tag].opts = cpu_to_le32(opts); - pp->cmd_slot[tag].status = 0; - pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff); - pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16); -} - -static int ahci_clo(struct ata_port *ap) -{ - void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; - struct ahci_host_priv *hpriv = ap->host_set->private_data; - u32 tmp; - - if (!(hpriv->cap & HOST_CAP_CLO)) - return -EOPNOTSUPP; - - tmp = readl(port_mmio + PORT_CMD); - tmp |= PORT_CMD_CLO; - writel(tmp, port_mmio + PORT_CMD); - - tmp = ata_wait_register(port_mmio + PORT_CMD, - PORT_CMD_CLO, PORT_CMD_CLO, 1, 500); - if (tmp & PORT_CMD_CLO) - return -EIO; - - return 0; -} - -static int ahci_prereset(struct ata_port *ap) -{ - if ((ap->flags & AHCI_FLAG_RESET_NEEDS_CLO) && - (ata_busy_wait(ap, ATA_BUSY, 1000) & ATA_BUSY)) { - /* ATA_BUSY hasn't cleared, so send a CLO */ - ahci_clo(ap); - } - - return ata_std_prereset(ap); -} - -static int ahci_softreset(struct ata_port *ap, unsigned int *class) -{ - struct ahci_port_priv *pp = ap->private_data; - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - const u32 cmd_fis_len = 5; /* five dwords */ - const char *reason = NULL; - struct ata_taskfile tf; - u32 tmp; - u8 *fis; - int rc; - - DPRINTK("ENTER\n"); - - if (ata_port_offline(ap)) { - DPRINTK("PHY reports no device\n"); - *class = ATA_DEV_NONE; - return 0; - } - - /* prepare for SRST (AHCI-1.1 10.4.1) */ - rc = ahci_stop_engine(port_mmio); - if (rc) { - reason = "failed to stop engine"; - goto fail_restart; - } - - /* check BUSY/DRQ, perform Command List Override if necessary */ - ahci_tf_read(ap, &tf); - if (tf.command & (ATA_BUSY | ATA_DRQ)) { - rc = ahci_clo(ap); - - if (rc == -EOPNOTSUPP) { - reason = "port busy but CLO unavailable"; - goto fail_restart; - } else if (rc) { - reason = "port busy but CLO failed"; - goto fail_restart; - } - } - - /* restart engine */ - ahci_start_engine(port_mmio); - - ata_tf_init(ap->device, &tf); - fis = pp->cmd_tbl; - - /* issue the first D2H Register FIS */ - ahci_fill_cmd_slot(pp, 0, - cmd_fis_len | AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY); - - tf.ctl |= ATA_SRST; - ata_tf_to_fis(&tf, fis, 0); - fis[1] &= ~(1 << 7); /* turn off Command FIS bit */ - - writel(1, port_mmio + PORT_CMD_ISSUE); - - tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1, 1, 500); - if (tmp & 0x1) { - rc = -EIO; - reason = "1st FIS failed"; - goto fail; - } - - /* spec says at least 5us, but be generous and sleep for 1ms */ - msleep(1); - - /* issue the second D2H Register FIS */ - ahci_fill_cmd_slot(pp, 0, cmd_fis_len); - - tf.ctl &= ~ATA_SRST; - ata_tf_to_fis(&tf, fis, 0); - fis[1] &= ~(1 << 7); /* turn off Command FIS bit */ - - writel(1, port_mmio + PORT_CMD_ISSUE); - readl(port_mmio + PORT_CMD_ISSUE); /* flush */ - - /* spec mandates ">= 2ms" before checking status. - * We wait 150ms, because that was the magic delay used for - * ATAPI devices in Hale Landis's ATADRVR, for the period of time - * between when the ATA command register is written, and then - * status is checked. Because waiting for "a while" before - * checking status is fine, post SRST, we perform this magic - * delay here as well. - */ - msleep(150); - - *class = ATA_DEV_NONE; - if (ata_port_online(ap)) { - if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { - rc = -EIO; - reason = "device not ready"; - goto fail; - } - *class = ahci_dev_classify(ap); - } - - DPRINTK("EXIT, class=%u\n", *class); - return 0; - - fail_restart: - ahci_start_engine(port_mmio); - fail: - ata_port_printk(ap, KERN_ERR, "softreset failed (%s)\n", reason); - return rc; -} - -static int ahci_hardreset(struct ata_port *ap, unsigned int *class) -{ - struct ahci_port_priv *pp = ap->private_data; - u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; - struct ata_taskfile tf; - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - int rc; - - DPRINTK("ENTER\n"); - - ahci_stop_engine(port_mmio); - - /* clear D2H reception area to properly wait for D2H FIS */ - ata_tf_init(ap->device, &tf); - tf.command = 0xff; - ata_tf_to_fis(&tf, d2h_fis, 0); - - rc = sata_std_hardreset(ap, class); - - ahci_start_engine(port_mmio); - - if (rc == 0 && ata_port_online(ap)) - *class = ahci_dev_classify(ap); - if (*class == ATA_DEV_UNKNOWN) - *class = ATA_DEV_NONE; - - DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); - return rc; -} - -static void ahci_postreset(struct ata_port *ap, unsigned int *class) -{ - void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; - u32 new_tmp, tmp; - - ata_std_postreset(ap, class); - - /* Make sure port's ATAPI bit is set appropriately */ - new_tmp = tmp = readl(port_mmio + PORT_CMD); - if (*class == ATA_DEV_ATAPI) - new_tmp |= PORT_CMD_ATAPI; - else - new_tmp &= ~PORT_CMD_ATAPI; - if (new_tmp != tmp) { - writel(new_tmp, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* flush */ - } -} - -static u8 ahci_check_status(struct ata_port *ap) -{ - void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr; - - return readl(mmio + PORT_TFDATA) & 0xFF; -} - -static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf) -{ - struct ahci_port_priv *pp = ap->private_data; - u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; - - ata_tf_from_fis(d2h_fis, tf); -} - -static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl) -{ - struct scatterlist *sg; - struct ahci_sg *ahci_sg; - unsigned int n_sg = 0; - - VPRINTK("ENTER\n"); - - /* - * Next, the S/G list. - */ - ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ; - ata_for_each_sg(sg, qc) { - dma_addr_t addr = sg_dma_address(sg); - u32 sg_len = sg_dma_len(sg); - - ahci_sg->addr = cpu_to_le32(addr & 0xffffffff); - ahci_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16); - ahci_sg->flags_size = cpu_to_le32(sg_len - 1); - - ahci_sg++; - n_sg++; - } - - return n_sg; -} - -static void ahci_qc_prep(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct ahci_port_priv *pp = ap->private_data; - int is_atapi = is_atapi_taskfile(&qc->tf); - void *cmd_tbl; - u32 opts; - const u32 cmd_fis_len = 5; /* five dwords */ - unsigned int n_elem; - - /* - * Fill in command table information. First, the header, - * a SATA Register - Host to Device command FIS. - */ - cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ; - - ata_tf_to_fis(&qc->tf, cmd_tbl, 0); - if (is_atapi) { - memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32); - memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len); - } - - n_elem = 0; - if (qc->flags & ATA_QCFLAG_DMAMAP) - n_elem = ahci_fill_sg(qc, cmd_tbl); - - /* - * Fill in command slot information. - */ - opts = cmd_fis_len | n_elem << 16; - if (qc->tf.flags & ATA_TFLAG_WRITE) - opts |= AHCI_CMD_WRITE; - if (is_atapi) - opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH; - - ahci_fill_cmd_slot(pp, qc->tag, opts); -} - -static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) -{ - struct ahci_port_priv *pp = ap->private_data; - struct ata_eh_info *ehi = &ap->eh_info; - unsigned int err_mask = 0, action = 0; - struct ata_queued_cmd *qc; - u32 serror; - - ata_ehi_clear_desc(ehi); - - /* AHCI needs SError cleared; otherwise, it might lock up */ - serror = ahci_scr_read(ap, SCR_ERROR); - ahci_scr_write(ap, SCR_ERROR, serror); - - /* analyze @irq_stat */ - ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat); - - if (irq_stat & PORT_IRQ_TF_ERR) - err_mask |= AC_ERR_DEV; - - if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) { - err_mask |= AC_ERR_HOST_BUS; - action |= ATA_EH_SOFTRESET; - } - - if (irq_stat & PORT_IRQ_IF_ERR) { - err_mask |= AC_ERR_ATA_BUS; - action |= ATA_EH_SOFTRESET; - ata_ehi_push_desc(ehi, ", interface fatal error"); - } - - if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) { - ata_ehi_hotplugged(ehi); - ata_ehi_push_desc(ehi, ", %s", irq_stat & PORT_IRQ_CONNECT ? - "connection status changed" : "PHY RDY changed"); - } - - if (irq_stat & PORT_IRQ_UNK_FIS) { - u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK); - - err_mask |= AC_ERR_HSM; - action |= ATA_EH_SOFTRESET; - ata_ehi_push_desc(ehi, ", unknown FIS %08x %08x %08x %08x", - unk[0], unk[1], unk[2], unk[3]); - } - - /* okay, let's hand over to EH */ - ehi->serror |= serror; - ehi->action |= action; - - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc) - qc->err_mask |= err_mask; - else - ehi->err_mask |= err_mask; - - if (irq_stat & PORT_IRQ_FREEZE) - ata_port_freeze(ap); - else - ata_port_abort(ap); -} - -static void ahci_host_intr(struct ata_port *ap) -{ - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - struct ata_eh_info *ehi = &ap->eh_info; - u32 status, qc_active; - int rc; - - status = readl(port_mmio + PORT_IRQ_STAT); - writel(status, port_mmio + PORT_IRQ_STAT); - - if (unlikely(status & PORT_IRQ_ERROR)) { - ahci_error_intr(ap, status); - return; - } - - if (ap->sactive) - qc_active = readl(port_mmio + PORT_SCR_ACT); - else - qc_active = readl(port_mmio + PORT_CMD_ISSUE); - - rc = ata_qc_complete_multiple(ap, qc_active, NULL); - if (rc > 0) - return; - if (rc < 0) { - ehi->err_mask |= AC_ERR_HSM; - ehi->action |= ATA_EH_SOFTRESET; - ata_port_freeze(ap); - return; - } - - /* hmmm... a spurious interupt */ - - /* some devices send D2H reg with I bit set during NCQ command phase */ - if (ap->sactive && status & PORT_IRQ_D2H_REG_FIS) - return; - - /* ignore interim PIO setup fis interrupts */ - if (ata_tag_valid(ap->active_tag) && (status & PORT_IRQ_PIOS_FIS)) - return; - - if (ata_ratelimit()) - ata_port_printk(ap, KERN_INFO, "spurious interrupt " - "(irq_stat 0x%x active_tag %d sactive 0x%x)\n", - status, ap->active_tag, ap->sactive); -} - -static void ahci_irq_clear(struct ata_port *ap) -{ - /* TODO */ -} - -static irqreturn_t ahci_interrupt(int irq, void *dev_instance, struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - struct ahci_host_priv *hpriv; - unsigned int i, handled = 0; - void __iomem *mmio; - u32 irq_stat, irq_ack = 0; - - VPRINTK("ENTER\n"); - - hpriv = host_set->private_data; - mmio = host_set->mmio_base; - - /* sigh. 0xffffffff is a valid return from h/w */ - irq_stat = readl(mmio + HOST_IRQ_STAT); - irq_stat &= hpriv->port_map; - if (!irq_stat) - return IRQ_NONE; - - spin_lock(&host_set->lock); - - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap; - - if (!(irq_stat & (1 << i))) - continue; - - ap = host_set->ports[i]; - if (ap) { - ahci_host_intr(ap); - VPRINTK("port %u\n", i); - } else { - VPRINTK("port %u (no irq)\n", i); - if (ata_ratelimit()) - dev_printk(KERN_WARNING, host_set->dev, - "interrupt on disabled port %u\n", i); - } - - irq_ack |= (1 << i); - } - - if (irq_ack) { - writel(irq_ack, mmio + HOST_IRQ_STAT); - handled = 1; - } - - spin_unlock(&host_set->lock); - - VPRINTK("EXIT\n"); - - return IRQ_RETVAL(handled); -} - -static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; - - if (qc->tf.protocol == ATA_PROT_NCQ) - writel(1 << qc->tag, port_mmio + PORT_SCR_ACT); - writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE); - readl(port_mmio + PORT_CMD_ISSUE); /* flush */ - - return 0; -} - -static void ahci_freeze(struct ata_port *ap) -{ - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - - /* turn IRQ off */ - writel(0, port_mmio + PORT_IRQ_MASK); -} - -static void ahci_thaw(struct ata_port *ap) -{ - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - u32 tmp; - - /* clear IRQ */ - tmp = readl(port_mmio + PORT_IRQ_STAT); - writel(tmp, port_mmio + PORT_IRQ_STAT); - writel(1 << ap->id, mmio + HOST_IRQ_STAT); - - /* turn IRQ back on */ - writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK); -} - -static void ahci_error_handler(struct ata_port *ap) -{ - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - - if (!(ap->pflags & ATA_PFLAG_FROZEN)) { - /* restart engine */ - ahci_stop_engine(port_mmio); - ahci_start_engine(port_mmio); - } - - /* perform recovery */ - ata_do_eh(ap, ahci_prereset, ahci_softreset, ahci_hardreset, - ahci_postreset); -} - -static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - - if (qc->flags & ATA_QCFLAG_FAILED) - qc->err_mask |= AC_ERR_OTHER; - - if (qc->err_mask) { - /* make DMA engine forget about the failed command */ - ahci_stop_engine(port_mmio); - ahci_start_engine(port_mmio); - } -} - -static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg) -{ - struct ahci_host_priv *hpriv = ap->host_set->private_data; - struct ahci_port_priv *pp = ap->private_data; - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - const char *emsg = NULL; - int rc; - - rc = ahci_deinit_port(port_mmio, hpriv->cap, &emsg); - if (rc) { - ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc); - ahci_init_port(port_mmio, hpriv->cap, - pp->cmd_slot_dma, pp->rx_fis_dma); - } - - return rc; -} - -static int ahci_port_resume(struct ata_port *ap) -{ - struct ahci_port_priv *pp = ap->private_data; - struct ahci_host_priv *hpriv = ap->host_set->private_data; - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - - ahci_init_port(port_mmio, hpriv->cap, pp->cmd_slot_dma, pp->rx_fis_dma); - - return 0; -} - -static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) -{ - struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); - void __iomem *mmio = host_set->mmio_base; - u32 ctl; - - if (mesg.event == PM_EVENT_SUSPEND) { - /* AHCI spec rev1.1 section 8.3.3: - * Software must disable interrupts prior to requesting a - * transition of the HBA to D3 state. - */ - ctl = readl(mmio + HOST_CTL); - ctl &= ~HOST_IRQ_EN; - writel(ctl, mmio + HOST_CTL); - readl(mmio + HOST_CTL); /* flush */ - } - - return ata_pci_device_suspend(pdev, mesg); -} - -static int ahci_pci_device_resume(struct pci_dev *pdev) -{ - struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); - struct ahci_host_priv *hpriv = host_set->private_data; - void __iomem *mmio = host_set->mmio_base; - int rc; - - ata_pci_device_do_resume(pdev); - - if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { - rc = ahci_reset_controller(mmio, pdev); - if (rc) - return rc; - - ahci_init_controller(mmio, pdev, host_set->n_ports, hpriv->cap); - } - - ata_host_set_resume(host_set); - - return 0; -} - -static int ahci_port_start(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct ahci_host_priv *hpriv = ap->host_set->private_data; - struct ahci_port_priv *pp; - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - void *mem; - dma_addr_t mem_dma; - int rc; - - pp = kmalloc(sizeof(*pp), GFP_KERNEL); - if (!pp) - return -ENOMEM; - memset(pp, 0, sizeof(*pp)); - - rc = ata_pad_alloc(ap, dev); - if (rc) { - kfree(pp); - return rc; - } - - mem = dma_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma, GFP_KERNEL); - if (!mem) { - ata_pad_free(ap, dev); - kfree(pp); - return -ENOMEM; - } - memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ); - - /* - * First item in chunk of DMA memory: 32-slot command table, - * 32 bytes each in size - */ - pp->cmd_slot = mem; - pp->cmd_slot_dma = mem_dma; - - mem += AHCI_CMD_SLOT_SZ; - mem_dma += AHCI_CMD_SLOT_SZ; - - /* - * Second item: Received-FIS area - */ - pp->rx_fis = mem; - pp->rx_fis_dma = mem_dma; - - mem += AHCI_RX_FIS_SZ; - mem_dma += AHCI_RX_FIS_SZ; - - /* - * Third item: data area for storing a single command - * and its scatter-gather table - */ - pp->cmd_tbl = mem; - pp->cmd_tbl_dma = mem_dma; - - ap->private_data = pp; - - /* initialize port */ - ahci_init_port(port_mmio, hpriv->cap, pp->cmd_slot_dma, pp->rx_fis_dma); - - return 0; -} - -static void ahci_port_stop(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct ahci_host_priv *hpriv = ap->host_set->private_data; - struct ahci_port_priv *pp = ap->private_data; - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - const char *emsg = NULL; - int rc; - - /* de-initialize port */ - rc = ahci_deinit_port(port_mmio, hpriv->cap, &emsg); - if (rc) - ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc); - - ap->private_data = NULL; - dma_free_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, - pp->cmd_slot, pp->cmd_slot_dma); - ata_pad_free(ap, dev); - kfree(pp); -} - -static void ahci_setup_port(struct ata_ioports *port, unsigned long base, - unsigned int port_idx) -{ - VPRINTK("ENTER, base==0x%lx, port_idx %u\n", base, port_idx); - base = ahci_port_base_ul(base, port_idx); - VPRINTK("base now==0x%lx\n", base); - - port->cmd_addr = base; - port->scr_addr = base + PORT_SCR; - - VPRINTK("EXIT\n"); -} - -static int ahci_host_init(struct ata_probe_ent *probe_ent) -{ - struct ahci_host_priv *hpriv = probe_ent->private_data; - struct pci_dev *pdev = to_pci_dev(probe_ent->dev); - void __iomem *mmio = probe_ent->mmio_base; - unsigned int i, using_dac; - int rc; - - rc = ahci_reset_controller(mmio, pdev); - if (rc) - return rc; - - hpriv->cap = readl(mmio + HOST_CAP); - hpriv->port_map = readl(mmio + HOST_PORTS_IMPL); - probe_ent->n_ports = (hpriv->cap & 0x1f) + 1; - - VPRINTK("cap 0x%x port_map 0x%x n_ports %d\n", - hpriv->cap, hpriv->port_map, probe_ent->n_ports); - - using_dac = hpriv->cap & HOST_CAP_64; - if (using_dac && - !pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { - rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); - if (rc) { - rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "64-bit DMA enable failed\n"); - return rc; - } - } - } else { - rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "32-bit DMA enable failed\n"); - return rc; - } - rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "32-bit consistent DMA enable failed\n"); - return rc; - } - } - - for (i = 0; i < probe_ent->n_ports; i++) - ahci_setup_port(&probe_ent->port[i], (unsigned long) mmio, i); - - ahci_init_controller(mmio, pdev, probe_ent->n_ports, hpriv->cap); - - pci_set_master(pdev); - - return 0; -} - -static void ahci_print_info(struct ata_probe_ent *probe_ent) -{ - struct ahci_host_priv *hpriv = probe_ent->private_data; - struct pci_dev *pdev = to_pci_dev(probe_ent->dev); - void __iomem *mmio = probe_ent->mmio_base; - u32 vers, cap, impl, speed; - const char *speed_s; - u16 cc; - const char *scc_s; - - vers = readl(mmio + HOST_VERSION); - cap = hpriv->cap; - impl = hpriv->port_map; - - speed = (cap >> 20) & 0xf; - if (speed == 1) - speed_s = "1.5"; - else if (speed == 2) - speed_s = "3"; - else - speed_s = "?"; - - pci_read_config_word(pdev, 0x0a, &cc); - if (cc == 0x0101) - scc_s = "IDE"; - else if (cc == 0x0106) - scc_s = "SATA"; - else if (cc == 0x0104) - scc_s = "RAID"; - else - scc_s = "unknown"; - - dev_printk(KERN_INFO, &pdev->dev, - "AHCI %02x%02x.%02x%02x " - "%u slots %u ports %s Gbps 0x%x impl %s mode\n" - , - - (vers >> 24) & 0xff, - (vers >> 16) & 0xff, - (vers >> 8) & 0xff, - vers & 0xff, - - ((cap >> 8) & 0x1f) + 1, - (cap & 0x1f) + 1, - speed_s, - impl, - scc_s); - - dev_printk(KERN_INFO, &pdev->dev, - "flags: " - "%s%s%s%s%s%s" - "%s%s%s%s%s%s%s\n" - , - - cap & (1 << 31) ? "64bit " : "", - cap & (1 << 30) ? "ncq " : "", - cap & (1 << 28) ? "ilck " : "", - cap & (1 << 27) ? "stag " : "", - cap & (1 << 26) ? "pm " : "", - cap & (1 << 25) ? "led " : "", - - cap & (1 << 24) ? "clo " : "", - cap & (1 << 19) ? "nz " : "", - cap & (1 << 18) ? "only " : "", - cap & (1 << 17) ? "pmp " : "", - cap & (1 << 15) ? "pio " : "", - cap & (1 << 14) ? "slum " : "", - cap & (1 << 13) ? "part " : "" - ); -} - -static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int printed_version; - struct ata_probe_ent *probe_ent = NULL; - struct ahci_host_priv *hpriv; - unsigned long base; - void __iomem *mmio_base; - unsigned int board_idx = (unsigned int) ent->driver_data; - int have_msi, pci_dev_busy = 0; - int rc; - - VPRINTK("ENTER\n"); - - WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS); - - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - - /* JMicron-specific fixup: make sure we're in AHCI mode */ - /* This is protected from races with ata_jmicron by the pci probe - locking */ - if (pdev->vendor == PCI_VENDOR_ID_JMICRON) { - /* AHCI enable, AHCI on function 0 */ - pci_write_config_byte(pdev, 0x41, 0xa1); - /* Function 1 is the PATA controller */ - if (PCI_FUNC(pdev->devfn)) - return -ENODEV; - } - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - pci_dev_busy = 1; - goto err_out; - } - - if (pci_enable_msi(pdev) == 0) - have_msi = 1; - else { - pci_intx(pdev, 1); - have_msi = 0; - } - - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); - if (probe_ent == NULL) { - rc = -ENOMEM; - goto err_out_msi; - } - - memset(probe_ent, 0, sizeof(*probe_ent)); - probe_ent->dev = pci_dev_to_dev(pdev); - INIT_LIST_HEAD(&probe_ent->node); - - mmio_base = pci_iomap(pdev, AHCI_PCI_BAR, 0); - if (mmio_base == NULL) { - rc = -ENOMEM; - goto err_out_free_ent; - } - base = (unsigned long) mmio_base; - - hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL); - if (!hpriv) { - rc = -ENOMEM; - goto err_out_iounmap; - } - memset(hpriv, 0, sizeof(*hpriv)); - - probe_ent->sht = ahci_port_info[board_idx].sht; - probe_ent->host_flags = ahci_port_info[board_idx].host_flags; - probe_ent->pio_mask = ahci_port_info[board_idx].pio_mask; - probe_ent->udma_mask = ahci_port_info[board_idx].udma_mask; - probe_ent->port_ops = ahci_port_info[board_idx].port_ops; - - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = IRQF_SHARED; - probe_ent->mmio_base = mmio_base; - probe_ent->private_data = hpriv; - - if (have_msi) - hpriv->flags |= AHCI_FLAG_MSI; - - /* initialize adapter */ - rc = ahci_host_init(probe_ent); - if (rc) - goto err_out_hpriv; - - if (!(probe_ent->host_flags & AHCI_FLAG_NO_NCQ) && - (hpriv->cap & HOST_CAP_NCQ)) - probe_ent->host_flags |= ATA_FLAG_NCQ; - - ahci_print_info(probe_ent); - - /* FIXME: check ata_device_add return value */ - ata_device_add(probe_ent); - kfree(probe_ent); - - return 0; - -err_out_hpriv: - kfree(hpriv); -err_out_iounmap: - pci_iounmap(pdev, mmio_base); -err_out_free_ent: - kfree(probe_ent); -err_out_msi: - if (have_msi) - pci_disable_msi(pdev); - else - pci_intx(pdev, 0); - pci_release_regions(pdev); -err_out: - if (!pci_dev_busy) - pci_disable_device(pdev); - return rc; -} - -static void ahci_remove_one (struct pci_dev *pdev) -{ - struct device *dev = pci_dev_to_dev(pdev); - struct ata_host_set *host_set = dev_get_drvdata(dev); - struct ahci_host_priv *hpriv = host_set->private_data; - unsigned int i; - int have_msi; - - for (i = 0; i < host_set->n_ports; i++) - ata_port_detach(host_set->ports[i]); - - have_msi = hpriv->flags & AHCI_FLAG_MSI; - free_irq(host_set->irq, host_set); - - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; - - ata_scsi_release(ap->host); - scsi_host_put(ap->host); - } - - kfree(hpriv); - pci_iounmap(pdev, host_set->mmio_base); - kfree(host_set); - - if (have_msi) - pci_disable_msi(pdev); - else - pci_intx(pdev, 0); - pci_release_regions(pdev); - pci_disable_device(pdev); - dev_set_drvdata(dev, NULL); -} - -static int __init ahci_init(void) -{ - return pci_register_driver(&ahci_pci_driver); -} - -static void __exit ahci_exit(void) -{ - pci_unregister_driver(&ahci_pci_driver); -} - - -MODULE_AUTHOR("Jeff Garzik"); -MODULE_DESCRIPTION("AHCI SATA low-level driver"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, ahci_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -module_init(ahci_init); -module_exit(ahci_exit); diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c deleted file mode 100644 index 46c34fd5af8..00000000000 --- a/drivers/scsi/ata_piix.c +++ /dev/null @@ -1,960 +0,0 @@ -/* - * ata_piix.c - Intel PATA/SATA controllers - * - * Maintained by: Jeff Garzik - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * - * Copyright 2003-2005 Red Hat Inc - * Copyright 2003-2005 Jeff Garzik - * - * - * Copyright header from piix.c: - * - * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer - * Copyright (C) 1998-2000 Andre Hedrick - * Copyright (C) 2003 Red Hat Inc - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Hardware documentation available at http://developer.intel.com/ - * - * Documentation - * Publically available from Intel web site. Errata documentation - * is also publically available. As an aide to anyone hacking on this - * driver the list of errata that are relevant is below.going back to - * PIIX4. Older device documentation is now a bit tricky to find. - * - * The chipsets all follow very much the same design. The orginal Triton - * series chipsets do _not_ support independant device timings, but this - * is fixed in Triton II. With the odd mobile exception the chips then - * change little except in gaining more modes until SATA arrives. This - * driver supports only the chips with independant timing (that is those - * with SITRE and the 0x44 timing register). See pata_oldpiix and pata_mpiix - * for the early chip drivers. - * - * Errata of note: - * - * Unfixable - * PIIX4 errata #9 - Only on ultra obscure hw - * ICH3 errata #13 - Not observed to affect real hw - * by Intel - * - * Things we must deal with - * PIIX4 errata #10 - BM IDE hang with non UDMA - * (must stop/start dma to recover) - * 440MX errata #15 - As PIIX4 errata #10 - * PIIX4 errata #15 - Must not read control registers - * during a PIO transfer - * 440MX errata #13 - As PIIX4 errata #15 - * ICH2 errata #21 - DMA mode 0 doesn't work right - * ICH0/1 errata #55 - As ICH2 errata #21 - * ICH2 spec c #9 - Extra operations needed to handle - * drive hotswap [NOT YET SUPPORTED] - * ICH2 spec c #20 - IDE PRD must not cross a 64K boundary - * and must be dword aligned - * ICH2 spec c #24 - UDMA mode 4,5 t85/86 should be 6ns not 3.3 - * - * Should have been BIOS fixed: - * 450NX: errata #19 - DMA hangs on old 450NX - * 450NX: errata #20 - DMA hangs on old 450NX - * 450NX: errata #25 - Corruption with DMA on old 450NX - * ICH3 errata #15 - IDE deadlock under high load - * (BIOS must set dev 31 fn 0 bit 23) - * ICH3 errata #18 - Don't use native mode - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "ata_piix" -#define DRV_VERSION "2.00" - -enum { - PIIX_IOCFG = 0x54, /* IDE I/O configuration register */ - ICH5_PMR = 0x90, /* port mapping register */ - ICH5_PCS = 0x92, /* port control and status */ - PIIX_SCC = 0x0A, /* sub-class code register */ - - PIIX_FLAG_IGNORE_PCS = (1 << 25), /* ignore PCS present bits */ - PIIX_FLAG_SCR = (1 << 26), /* SCR available */ - PIIX_FLAG_AHCI = (1 << 27), /* AHCI possible */ - PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */ - - /* combined mode. if set, PATA is channel 0. - * if clear, PATA is channel 1. - */ - PIIX_PORT_ENABLED = (1 << 0), - PIIX_PORT_PRESENT = (1 << 4), - - PIIX_80C_PRI = (1 << 5) | (1 << 4), - PIIX_80C_SEC = (1 << 7) | (1 << 6), - - /* controller IDs */ - piix4_pata = 0, - ich5_pata = 1, - ich5_sata = 2, - esb_sata = 3, - ich6_sata = 4, - ich6_sata_ahci = 5, - ich6m_sata_ahci = 6, - ich8_sata_ahci = 7, - - /* constants for mapping table */ - P0 = 0, /* port 0 */ - P1 = 1, /* port 1 */ - P2 = 2, /* port 2 */ - P3 = 3, /* port 3 */ - IDE = -1, /* IDE */ - NA = -2, /* not avaliable */ - RV = -3, /* reserved */ - - PIIX_AHCI_DEVICE = 6, -}; - -struct piix_map_db { - const u32 mask; - const u16 port_enable; - const int present_shift; - const int map[][4]; -}; - -struct piix_host_priv { - const int *map; - const struct piix_map_db *map_db; -}; - -static int piix_init_one (struct pci_dev *pdev, - const struct pci_device_id *ent); -static void piix_host_stop(struct ata_host_set *host_set); -static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev); -static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev); -static void piix_pata_error_handler(struct ata_port *ap); -static void piix_sata_error_handler(struct ata_port *ap); - -static unsigned int in_module_init = 1; - -static const struct pci_device_id piix_pci_tbl[] = { -#ifdef ATA_ENABLE_PATA - { 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix4_pata }, - { 0x8086, 0x24db, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, - { 0x8086, 0x25a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, - { 0x8086, 0x27df, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, -#endif - - /* NOTE: The following PCI ids must be kept in sync with the - * list in drivers/pci/quirks.c. - */ - - /* 82801EB (ICH5) */ - { 0x8086, 0x24d1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, - /* 82801EB (ICH5) */ - { 0x8086, 0x24df, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, - /* 6300ESB (ICH5 variant with broken PCS present bits) */ - { 0x8086, 0x25a3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, esb_sata }, - /* 6300ESB pretending RAID */ - { 0x8086, 0x25b0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, esb_sata }, - /* 82801FB/FW (ICH6/ICH6W) */ - { 0x8086, 0x2651, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata }, - /* 82801FR/FRW (ICH6R/ICH6RW) */ - { 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, - /* 82801FBM ICH6M (ICH6R with only port 0 and 2 implemented) */ - { 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci }, - /* 82801GB/GR/GH (ICH7, identical to ICH6) */ - { 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, - /* 2801GBM/GHM (ICH7M, identical to ICH6M) */ - { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci }, - /* Enterprise Southbridge 2 (where's the datasheet?) */ - { 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, - /* SATA Controller 1 IDE (ICH8, no datasheet yet) */ - { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, - /* SATA Controller 2 IDE (ICH8, ditto) */ - { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, - /* Mobile SATA Controller IDE (ICH8M, ditto) */ - { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, - - { } /* terminate list */ -}; - -static struct pci_driver piix_pci_driver = { - .name = DRV_NAME, - .id_table = piix_pci_tbl, - .probe = piix_init_one, - .remove = ata_pci_remove_one, - .suspend = ata_pci_device_suspend, - .resume = ata_pci_device_resume, -}; - -static struct scsi_host_template piix_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -}; - -static const struct ata_port_operations piix_pata_ops = { - .port_disable = ata_port_disable, - .set_piomode = piix_set_piomode, - .set_dmamode = piix_set_dmamode, - .mode_filter = ata_pci_default_filter, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, - - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = piix_pata_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = piix_host_stop, -}; - -static const struct ata_port_operations piix_sata_ops = { - .port_disable = ata_port_disable, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, - - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = piix_sata_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = piix_host_stop, -}; - -static const struct piix_map_db ich5_map_db = { - .mask = 0x7, - .port_enable = 0x3, - .present_shift = 4, - .map = { - /* PM PS SM SS MAP */ - { P0, NA, P1, NA }, /* 000b */ - { P1, NA, P0, NA }, /* 001b */ - { RV, RV, RV, RV }, - { RV, RV, RV, RV }, - { P0, P1, IDE, IDE }, /* 100b */ - { P1, P0, IDE, IDE }, /* 101b */ - { IDE, IDE, P0, P1 }, /* 110b */ - { IDE, IDE, P1, P0 }, /* 111b */ - }, -}; - -static const struct piix_map_db ich6_map_db = { - .mask = 0x3, - .port_enable = 0xf, - .present_shift = 4, - .map = { - /* PM PS SM SS MAP */ - { P0, P2, P1, P3 }, /* 00b */ - { IDE, IDE, P1, P3 }, /* 01b */ - { P0, P2, IDE, IDE }, /* 10b */ - { RV, RV, RV, RV }, - }, -}; - -static const struct piix_map_db ich6m_map_db = { - .mask = 0x3, - .port_enable = 0x5, - .present_shift = 4, - .map = { - /* PM PS SM SS MAP */ - { P0, P2, RV, RV }, /* 00b */ - { RV, RV, RV, RV }, - { P0, P2, IDE, IDE }, /* 10b */ - { RV, RV, RV, RV }, - }, -}; - -static const struct piix_map_db ich8_map_db = { - .mask = 0x3, - .port_enable = 0x3, - .present_shift = 8, - .map = { - /* PM PS SM SS MAP */ - { P0, NA, P1, NA }, /* 00b (hardwired) */ - { RV, RV, RV, RV }, - { RV, RV, RV, RV }, /* 10b (never) */ - { RV, RV, RV, RV }, - }, -}; - -static const struct piix_map_db *piix_map_db_table[] = { - [ich5_sata] = &ich5_map_db, - [esb_sata] = &ich5_map_db, - [ich6_sata] = &ich6_map_db, - [ich6_sata_ahci] = &ich6_map_db, - [ich6m_sata_ahci] = &ich6m_map_db, - [ich8_sata_ahci] = &ich8_map_db, -}; - -static struct ata_port_info piix_port_info[] = { - /* piix4_pata */ - { - .sht = &piix_sht, - .host_flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ -#if 0 - .mwdma_mask = 0x06, /* mwdma1-2 */ -#else - .mwdma_mask = 0x00, /* mwdma broken */ -#endif - .udma_mask = ATA_UDMA_MASK_40C, - .port_ops = &piix_pata_ops, - }, - - /* ich5_pata */ - { - .sht = &piix_sht, - .host_flags = ATA_FLAG_SLAVE_POSS | PIIX_FLAG_CHECKINTR, - .pio_mask = 0x1f, /* pio0-4 */ -#if 0 - .mwdma_mask = 0x06, /* mwdma1-2 */ -#else - .mwdma_mask = 0x00, /* mwdma broken */ -#endif - .udma_mask = 0x3f, /* udma0-5 */ - .port_ops = &piix_pata_ops, - }, - - /* ich5_sata */ - { - .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &piix_sata_ops, - }, - - /* i6300esb_sata */ - { - .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | - PIIX_FLAG_CHECKINTR | PIIX_FLAG_IGNORE_PCS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &piix_sata_ops, - }, - - /* ich6_sata */ - { - .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | - PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &piix_sata_ops, - }, - - /* ich6_sata_ahci */ - { - .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | - PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | - PIIX_FLAG_AHCI, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &piix_sata_ops, - }, - - /* ich6m_sata_ahci */ - { - .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | - PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | - PIIX_FLAG_AHCI, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &piix_sata_ops, - }, - - /* ich8_sata_ahci */ - { - .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | - PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | - PIIX_FLAG_AHCI, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &piix_sata_ops, - }, -}; - -static struct pci_bits piix_enable_bits[] = { - { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */ - { 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */ -}; - -MODULE_AUTHOR("Andre Hedrick, Alan Cox, Andrzej Krzysztofowicz, Jeff Garzik"); -MODULE_DESCRIPTION("SCSI low-level driver for Intel PIIX/ICH ATA controllers"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, piix_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -/** - * piix_pata_cbl_detect - Probe host controller cable detect info - * @ap: Port for which cable detect info is desired - * - * Read 80c cable indicator from ATA PCI device's PCI config - * register. This register is normally set by firmware (BIOS). - * - * LOCKING: - * None (inherited from caller). - */ -static void piix_pata_cbl_detect(struct ata_port *ap) -{ - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - u8 tmp, mask; - - /* no 80c support in host controller? */ - if ((ap->udma_mask & ~ATA_UDMA_MASK_40C) == 0) - goto cbl40; - - /* check BIOS cable detect results */ - mask = ap->port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC; - pci_read_config_byte(pdev, PIIX_IOCFG, &tmp); - if ((tmp & mask) == 0) - goto cbl40; - - ap->cbl = ATA_CBL_PATA80; - return; - -cbl40: - ap->cbl = ATA_CBL_PATA40; - ap->udma_mask &= ATA_UDMA_MASK_40C; -} - -/** - * piix_pata_prereset - prereset for PATA host controller - * @ap: Target port - * - * Prereset including cable detection. - * - * LOCKING: - * None (inherited from caller). - */ -static int piix_pata_prereset(struct ata_port *ap) -{ - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - - if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no])) { - ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n"); - ap->eh_context.i.action &= ~ATA_EH_RESET_MASK; - return 0; - } - - piix_pata_cbl_detect(ap); - - return ata_std_prereset(ap); -} - -static void piix_pata_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, piix_pata_prereset, ata_std_softreset, NULL, - ata_std_postreset); -} - -/** - * piix_sata_prereset - prereset for SATA host controller - * @ap: Target port - * - * Reads and configures SATA PCI device's PCI config register - * Port Configuration and Status (PCS) to determine port and - * device availability. Return -ENODEV to skip reset if no - * device is present. - * - * LOCKING: - * None (inherited from caller). - * - * RETURNS: - * 0 if device is present, -ENODEV otherwise. - */ -static int piix_sata_prereset(struct ata_port *ap) -{ - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - struct piix_host_priv *hpriv = ap->host_set->private_data; - const unsigned int *map = hpriv->map; - int base = 2 * ap->port_no; - unsigned int present = 0; - int port, i; - u16 pcs; - - pci_read_config_word(pdev, ICH5_PCS, &pcs); - DPRINTK("ata%u: ENTER, pcs=0x%x base=%d\n", ap->id, pcs, base); - - for (i = 0; i < 2; i++) { - port = map[base + i]; - if (port < 0) - continue; - if ((ap->flags & PIIX_FLAG_IGNORE_PCS) || - (pcs & 1 << (hpriv->map_db->present_shift + port))) - present = 1; - } - - DPRINTK("ata%u: LEAVE, pcs=0x%x present=0x%x\n", - ap->id, pcs, present); - - if (!present) { - ata_port_printk(ap, KERN_INFO, "SATA port has no device.\n"); - ap->eh_context.i.action &= ~ATA_EH_RESET_MASK; - return 0; - } - - return ata_std_prereset(ap); -} - -static void piix_sata_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, piix_sata_prereset, ata_std_softreset, NULL, - ata_std_postreset); -} - -/** - * piix_set_piomode - Initialize host controller PATA PIO timings - * @ap: Port whose timings we are configuring - * @adev: um - * - * Set PIO mode for device, in host controller PCI config space. - * - * LOCKING: - * None (inherited from caller). - */ - -static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev) -{ - unsigned int pio = adev->pio_mode - XFER_PIO_0; - struct pci_dev *dev = to_pci_dev(ap->host_set->dev); - unsigned int is_slave = (adev->devno != 0); - unsigned int master_port= ap->port_no ? 0x42 : 0x40; - unsigned int slave_port = 0x44; - u16 master_data; - u8 slave_data; - - static const /* ISP RTC */ - u8 timings[][2] = { { 0, 0 }, - { 0, 0 }, - { 1, 0 }, - { 2, 1 }, - { 2, 3 }, }; - - pci_read_config_word(dev, master_port, &master_data); - if (is_slave) { - master_data |= 0x4000; - /* enable PPE, IE and TIME */ - master_data |= 0x0070; - pci_read_config_byte(dev, slave_port, &slave_data); - slave_data &= (ap->port_no ? 0x0f : 0xf0); - slave_data |= - (timings[pio][0] << 2) | - (timings[pio][1] << (ap->port_no ? 4 : 0)); - } else { - master_data &= 0xccf8; - /* enable PPE, IE and TIME */ - master_data |= 0x0007; - master_data |= - (timings[pio][0] << 12) | - (timings[pio][1] << 8); - } - pci_write_config_word(dev, master_port, master_data); - if (is_slave) - pci_write_config_byte(dev, slave_port, slave_data); -} - -/** - * piix_set_dmamode - Initialize host controller PATA PIO timings - * @ap: Port whose timings we are configuring - * @adev: um - * @udma: udma mode, 0 - 6 - * - * Set UDMA mode for device, in host controller PCI config space. - * - * LOCKING: - * None (inherited from caller). - */ - -static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev) -{ - unsigned int udma = adev->dma_mode; /* FIXME: MWDMA too */ - struct pci_dev *dev = to_pci_dev(ap->host_set->dev); - u8 maslave = ap->port_no ? 0x42 : 0x40; - u8 speed = udma; - unsigned int drive_dn = (ap->port_no ? 2 : 0) + adev->devno; - int a_speed = 3 << (drive_dn * 4); - int u_flag = 1 << drive_dn; - int v_flag = 0x01 << drive_dn; - int w_flag = 0x10 << drive_dn; - int u_speed = 0; - int sitre; - u16 reg4042, reg4a; - u8 reg48, reg54, reg55; - - pci_read_config_word(dev, maslave, ®4042); - DPRINTK("reg4042 = 0x%04x\n", reg4042); - sitre = (reg4042 & 0x4000) ? 1 : 0; - pci_read_config_byte(dev, 0x48, ®48); - pci_read_config_word(dev, 0x4a, ®4a); - pci_read_config_byte(dev, 0x54, ®54); - pci_read_config_byte(dev, 0x55, ®55); - - switch(speed) { - case XFER_UDMA_4: - case XFER_UDMA_2: u_speed = 2 << (drive_dn * 4); break; - case XFER_UDMA_6: - case XFER_UDMA_5: - case XFER_UDMA_3: - case XFER_UDMA_1: u_speed = 1 << (drive_dn * 4); break; - case XFER_UDMA_0: u_speed = 0 << (drive_dn * 4); break; - case XFER_MW_DMA_2: - case XFER_MW_DMA_1: break; - default: - BUG(); - return; - } - - if (speed >= XFER_UDMA_0) { - if (!(reg48 & u_flag)) - pci_write_config_byte(dev, 0x48, reg48 | u_flag); - if (speed == XFER_UDMA_5) { - pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag); - } else { - pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); - } - if ((reg4a & a_speed) != u_speed) - pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed); - if (speed > XFER_UDMA_2) { - if (!(reg54 & v_flag)) - pci_write_config_byte(dev, 0x54, reg54 | v_flag); - } else - pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); - } else { - if (reg48 & u_flag) - pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); - if (reg4a & a_speed) - pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); - if (reg54 & v_flag) - pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); - if (reg55 & w_flag) - pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); - } -} - -#define AHCI_PCI_BAR 5 -#define AHCI_GLOBAL_CTL 0x04 -#define AHCI_ENABLE (1 << 31) -static int piix_disable_ahci(struct pci_dev *pdev) -{ - void __iomem *mmio; - u32 tmp; - int rc = 0; - - /* BUG: pci_enable_device has not yet been called. This - * works because this device is usually set up by BIOS. - */ - - if (!pci_resource_start(pdev, AHCI_PCI_BAR) || - !pci_resource_len(pdev, AHCI_PCI_BAR)) - return 0; - - mmio = pci_iomap(pdev, AHCI_PCI_BAR, 64); - if (!mmio) - return -ENOMEM; - - tmp = readl(mmio + AHCI_GLOBAL_CTL); - if (tmp & AHCI_ENABLE) { - tmp &= ~AHCI_ENABLE; - writel(tmp, mmio + AHCI_GLOBAL_CTL); - - tmp = readl(mmio + AHCI_GLOBAL_CTL); - if (tmp & AHCI_ENABLE) - rc = -EIO; - } - - pci_iounmap(pdev, mmio); - return rc; -} - -/** - * piix_check_450nx_errata - Check for problem 450NX setup - * @ata_dev: the PCI device to check - * - * Check for the present of 450NX errata #19 and errata #25. If - * they are found return an error code so we can turn off DMA - */ - -static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev) -{ - struct pci_dev *pdev = NULL; - u16 cfg; - u8 rev; - int no_piix_dma = 0; - - while((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev)) != NULL) - { - /* Look for 450NX PXB. Check for problem configurations - A PCI quirk checks bit 6 already */ - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); - pci_read_config_word(pdev, 0x41, &cfg); - /* Only on the original revision: IDE DMA can hang */ - if (rev == 0x00) - no_piix_dma = 1; - /* On all revisions below 5 PXB bus lock must be disabled for IDE */ - else if (cfg & (1<<14) && rev < 5) - no_piix_dma = 2; - } - if (no_piix_dma) - dev_printk(KERN_WARNING, &ata_dev->dev, "450NX errata present, disabling IDE DMA.\n"); - if (no_piix_dma == 2) - dev_printk(KERN_WARNING, &ata_dev->dev, "A BIOS update may resolve this.\n"); - return no_piix_dma; -} - -static void __devinit piix_init_pcs(struct pci_dev *pdev, - const struct piix_map_db *map_db) -{ - u16 pcs, new_pcs; - - pci_read_config_word(pdev, ICH5_PCS, &pcs); - - new_pcs = pcs | map_db->port_enable; - - if (new_pcs != pcs) { - DPRINTK("updating PCS from 0x%x to 0x%x\n", pcs, new_pcs); - pci_write_config_word(pdev, ICH5_PCS, new_pcs); - msleep(150); - } -} - -static void __devinit piix_init_sata_map(struct pci_dev *pdev, - struct ata_port_info *pinfo, - const struct piix_map_db *map_db) -{ - struct piix_host_priv *hpriv = pinfo[0].private_data; - const unsigned int *map; - int i, invalid_map = 0; - u8 map_value; - - pci_read_config_byte(pdev, ICH5_PMR, &map_value); - - map = map_db->map[map_value & map_db->mask]; - - dev_printk(KERN_INFO, &pdev->dev, "MAP ["); - for (i = 0; i < 4; i++) { - switch (map[i]) { - case RV: - invalid_map = 1; - printk(" XX"); - break; - - case NA: - printk(" --"); - break; - - case IDE: - WARN_ON((i & 1) || map[i + 1] != IDE); - pinfo[i / 2] = piix_port_info[ich5_pata]; - pinfo[i / 2].private_data = hpriv; - i++; - printk(" IDE IDE"); - break; - - default: - printk(" P%d", map[i]); - if (i & 1) - pinfo[i / 2].host_flags |= ATA_FLAG_SLAVE_POSS; - break; - } - } - printk(" ]\n"); - - if (invalid_map) - dev_printk(KERN_ERR, &pdev->dev, - "invalid MAP value %u\n", map_value); - - hpriv->map = map; - hpriv->map_db = map_db; -} - -/** - * piix_init_one - Register PIIX ATA PCI device with kernel services - * @pdev: PCI device to register - * @ent: Entry in piix_pci_tbl matching with @pdev - * - * Called from kernel PCI layer. We probe for combined mode (sigh), - * and then hand over control to libata, for it to do the rest. - * - * LOCKING: - * Inherited from PCI layer (may sleep). - * - * RETURNS: - * Zero on success, or -ERRNO value. - */ - -static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int printed_version; - struct ata_port_info port_info[2]; - struct ata_port_info *ppinfo[2] = { &port_info[0], &port_info[1] }; - struct piix_host_priv *hpriv; - unsigned long host_flags; - - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, - "version " DRV_VERSION "\n"); - - /* no hotplugging support (FIXME) */ - if (!in_module_init) - return -ENODEV; - - hpriv = kzalloc(sizeof(*hpriv), GFP_KERNEL); - if (!hpriv) - return -ENOMEM; - - port_info[0] = piix_port_info[ent->driver_data]; - port_info[1] = piix_port_info[ent->driver_data]; - port_info[0].private_data = hpriv; - port_info[1].private_data = hpriv; - - host_flags = port_info[0].host_flags; - - if (host_flags & PIIX_FLAG_AHCI) { - u8 tmp; - pci_read_config_byte(pdev, PIIX_SCC, &tmp); - if (tmp == PIIX_AHCI_DEVICE) { - int rc = piix_disable_ahci(pdev); - if (rc) - return rc; - } - } - - /* Initialize SATA map */ - if (host_flags & ATA_FLAG_SATA) { - piix_init_sata_map(pdev, port_info, - piix_map_db_table[ent->driver_data]); - piix_init_pcs(pdev, piix_map_db_table[ent->driver_data]); - } - - /* On ICH5, some BIOSen disable the interrupt using the - * PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3. - * On ICH6, this bit has the same effect, but only when - * MSI is disabled (and it is disabled, as we don't use - * message-signalled interrupts currently). - */ - if (host_flags & PIIX_FLAG_CHECKINTR) - pci_intx(pdev, 1); - - if (piix_check_450nx_errata(pdev)) { - /* This writes into the master table but it does not - really matter for this errata as we will apply it to - all the PIIX devices on the board */ - port_info[0].mwdma_mask = 0; - port_info[0].udma_mask = 0; - port_info[1].mwdma_mask = 0; - port_info[1].udma_mask = 0; - } - return ata_pci_init_one(pdev, ppinfo, 2); -} - -static void piix_host_stop(struct ata_host_set *host_set) -{ - ata_host_stop(host_set); -} - -static int __init piix_init(void) -{ - int rc; - - DPRINTK("pci_register_driver\n"); - rc = pci_register_driver(&piix_pci_driver); - if (rc) - return rc; - - in_module_init = 0; - - DPRINTK("done\n"); - return 0; -} - -static void __exit piix_exit(void) -{ - pci_unregister_driver(&piix_pci_driver); -} - -module_init(piix_init); -module_exit(piix_exit); - diff --git a/drivers/scsi/libata-bmdma.c b/drivers/scsi/libata-bmdma.c deleted file mode 100644 index 158f62dbf21..00000000000 --- a/drivers/scsi/libata-bmdma.c +++ /dev/null @@ -1,1109 +0,0 @@ -/* - * libata-bmdma.c - helper library for PCI IDE BMDMA - * - * Maintained by: Jeff Garzik - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * Copyright 2003-2006 Red Hat, Inc. All rights reserved. - * Copyright 2003-2006 Jeff Garzik - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Hardware documentation available from http://www.t13.org/ and - * http://www.sata-io.org/ - * - */ - -#include -#include -#include - -#include "libata.h" - -/** - * ata_tf_load_pio - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Outputs ATA taskfile to standard ATA host controller. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_load_pio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; - - if (tf->ctl != ap->last_ctl) { - outb(tf->ctl, ioaddr->ctl_addr); - ap->last_ctl = tf->ctl; - ata_wait_idle(ap); - } - - if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { - outb(tf->hob_feature, ioaddr->feature_addr); - outb(tf->hob_nsect, ioaddr->nsect_addr); - outb(tf->hob_lbal, ioaddr->lbal_addr); - outb(tf->hob_lbam, ioaddr->lbam_addr); - outb(tf->hob_lbah, ioaddr->lbah_addr); - VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", - tf->hob_feature, - tf->hob_nsect, - tf->hob_lbal, - tf->hob_lbam, - tf->hob_lbah); - } - - if (is_addr) { - outb(tf->feature, ioaddr->feature_addr); - outb(tf->nsect, ioaddr->nsect_addr); - outb(tf->lbal, ioaddr->lbal_addr); - outb(tf->lbam, ioaddr->lbam_addr); - outb(tf->lbah, ioaddr->lbah_addr); - VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", - tf->feature, - tf->nsect, - tf->lbal, - tf->lbam, - tf->lbah); - } - - if (tf->flags & ATA_TFLAG_DEVICE) { - outb(tf->device, ioaddr->device_addr); - VPRINTK("device 0x%X\n", tf->device); - } - - ata_wait_idle(ap); -} - -/** - * ata_tf_load_mmio - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Outputs ATA taskfile to standard ATA host controller using MMIO. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; - - if (tf->ctl != ap->last_ctl) { - writeb(tf->ctl, (void __iomem *) ap->ioaddr.ctl_addr); - ap->last_ctl = tf->ctl; - ata_wait_idle(ap); - } - - if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { - writeb(tf->hob_feature, (void __iomem *) ioaddr->feature_addr); - writeb(tf->hob_nsect, (void __iomem *) ioaddr->nsect_addr); - writeb(tf->hob_lbal, (void __iomem *) ioaddr->lbal_addr); - writeb(tf->hob_lbam, (void __iomem *) ioaddr->lbam_addr); - writeb(tf->hob_lbah, (void __iomem *) ioaddr->lbah_addr); - VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", - tf->hob_feature, - tf->hob_nsect, - tf->hob_lbal, - tf->hob_lbam, - tf->hob_lbah); - } - - if (is_addr) { - writeb(tf->feature, (void __iomem *) ioaddr->feature_addr); - writeb(tf->nsect, (void __iomem *) ioaddr->nsect_addr); - writeb(tf->lbal, (void __iomem *) ioaddr->lbal_addr); - writeb(tf->lbam, (void __iomem *) ioaddr->lbam_addr); - writeb(tf->lbah, (void __iomem *) ioaddr->lbah_addr); - VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", - tf->feature, - tf->nsect, - tf->lbal, - tf->lbam, - tf->lbah); - } - - if (tf->flags & ATA_TFLAG_DEVICE) { - writeb(tf->device, (void __iomem *) ioaddr->device_addr); - VPRINTK("device 0x%X\n", tf->device); - } - - ata_wait_idle(ap); -} - - -/** - * ata_tf_load - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Outputs ATA taskfile to standard ATA host controller using MMIO - * or PIO as indicated by the ATA_FLAG_MMIO flag. - * Writes the control, feature, nsect, lbal, lbam, and lbah registers. - * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect, - * hob_lbal, hob_lbam, and hob_lbah. - * - * This function waits for idle (!BUSY and !DRQ) after writing - * registers. If the control register has a new value, this - * function also waits for idle after writing control and before - * writing the remaining registers. - * - * May be used as the tf_load() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) -{ - if (ap->flags & ATA_FLAG_MMIO) - ata_tf_load_mmio(ap, tf); - else - ata_tf_load_pio(ap, tf); -} - -/** - * ata_exec_command_pio - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues PIO write to ATA command register, with proper - * synchronization with interrupt handler / other threads. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); - - outb(tf->command, ap->ioaddr.command_addr); - ata_pause(ap); -} - - -/** - * ata_exec_command_mmio - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues MMIO write to ATA command register, with proper - * synchronization with interrupt handler / other threads. - * - * FIXME: missing write posting for 400nS delay enforcement - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); - - writeb(tf->command, (void __iomem *) ap->ioaddr.command_addr); - ata_pause(ap); -} - - -/** - * ata_exec_command - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues PIO/MMIO write to ATA command register, with proper - * synchronization with interrupt handler / other threads. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) -{ - if (ap->flags & ATA_FLAG_MMIO) - ata_exec_command_mmio(ap, tf); - else - ata_exec_command_pio(ap, tf); -} - -/** - * ata_tf_read_pio - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input - * - * Reads ATA taskfile registers for currently-selected device - * into @tf. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_read_pio(struct ata_port *ap, struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - tf->command = ata_check_status(ap); - tf->feature = inb(ioaddr->error_addr); - tf->nsect = inb(ioaddr->nsect_addr); - tf->lbal = inb(ioaddr->lbal_addr); - tf->lbam = inb(ioaddr->lbam_addr); - tf->lbah = inb(ioaddr->lbah_addr); - tf->device = inb(ioaddr->device_addr); - - if (tf->flags & ATA_TFLAG_LBA48) { - outb(tf->ctl | ATA_HOB, ioaddr->ctl_addr); - tf->hob_feature = inb(ioaddr->error_addr); - tf->hob_nsect = inb(ioaddr->nsect_addr); - tf->hob_lbal = inb(ioaddr->lbal_addr); - tf->hob_lbam = inb(ioaddr->lbam_addr); - tf->hob_lbah = inb(ioaddr->lbah_addr); - } -} - -/** - * ata_tf_read_mmio - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input - * - * Reads ATA taskfile registers for currently-selected device - * into @tf via MMIO. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - tf->command = ata_check_status(ap); - tf->feature = readb((void __iomem *)ioaddr->error_addr); - tf->nsect = readb((void __iomem *)ioaddr->nsect_addr); - tf->lbal = readb((void __iomem *)ioaddr->lbal_addr); - tf->lbam = readb((void __iomem *)ioaddr->lbam_addr); - tf->lbah = readb((void __iomem *)ioaddr->lbah_addr); - tf->device = readb((void __iomem *)ioaddr->device_addr); - - if (tf->flags & ATA_TFLAG_LBA48) { - writeb(tf->ctl | ATA_HOB, (void __iomem *) ap->ioaddr.ctl_addr); - tf->hob_feature = readb((void __iomem *)ioaddr->error_addr); - tf->hob_nsect = readb((void __iomem *)ioaddr->nsect_addr); - tf->hob_lbal = readb((void __iomem *)ioaddr->lbal_addr); - tf->hob_lbam = readb((void __iomem *)ioaddr->lbam_addr); - tf->hob_lbah = readb((void __iomem *)ioaddr->lbah_addr); - } -} - - -/** - * ata_tf_read - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input - * - * Reads ATA taskfile registers for currently-selected device - * into @tf. - * - * Reads nsect, lbal, lbam, lbah, and device. If ATA_TFLAG_LBA48 - * is set, also reads the hob registers. - * - * May be used as the tf_read() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) -{ - if (ap->flags & ATA_FLAG_MMIO) - ata_tf_read_mmio(ap, tf); - else - ata_tf_read_pio(ap, tf); -} - -/** - * ata_check_status_pio - Read device status reg & clear interrupt - * @ap: port where the device is - * - * Reads ATA taskfile status register for currently-selected device - * and return its value. This also clears pending interrupts - * from this device - * - * LOCKING: - * Inherited from caller. - */ -static u8 ata_check_status_pio(struct ata_port *ap) -{ - return inb(ap->ioaddr.status_addr); -} - -/** - * ata_check_status_mmio - Read device status reg & clear interrupt - * @ap: port where the device is - * - * Reads ATA taskfile status register for currently-selected device - * via MMIO and return its value. This also clears pending interrupts - * from this device - * - * LOCKING: - * Inherited from caller. - */ -static u8 ata_check_status_mmio(struct ata_port *ap) -{ - return readb((void __iomem *) ap->ioaddr.status_addr); -} - - -/** - * ata_check_status - Read device status reg & clear interrupt - * @ap: port where the device is - * - * Reads ATA taskfile status register for currently-selected device - * and return its value. This also clears pending interrupts - * from this device - * - * May be used as the check_status() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -u8 ata_check_status(struct ata_port *ap) -{ - if (ap->flags & ATA_FLAG_MMIO) - return ata_check_status_mmio(ap); - return ata_check_status_pio(ap); -} - - -/** - * ata_altstatus - Read device alternate status reg - * @ap: port where the device is - * - * Reads ATA taskfile alternate status register for - * currently-selected device and return its value. - * - * Note: may NOT be used as the check_altstatus() entry in - * ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -u8 ata_altstatus(struct ata_port *ap) -{ - if (ap->ops->check_altstatus) - return ap->ops->check_altstatus(ap); - - if (ap->flags & ATA_FLAG_MMIO) - return readb((void __iomem *)ap->ioaddr.altstatus_addr); - return inb(ap->ioaddr.altstatus_addr); -} - -/** - * ata_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_bmdma_setup_mmio (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); - u8 dmactl; - void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; - - /* load PRD table addr. */ - mb(); /* make sure PRD table writes are visible to controller */ - writel(ap->prd_dma, mmio + ATA_DMA_TABLE_OFS); - - /* specify data direction, triple-check start bit is clear */ - dmactl = readb(mmio + ATA_DMA_CMD); - dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); - if (!rw) - dmactl |= ATA_DMA_WR; - writeb(dmactl, mmio + ATA_DMA_CMD); - - /* issue r/w command */ - ap->ops->exec_command(ap, &qc->tf); -} - -/** - * ata_bmdma_start_mmio - Start a PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_bmdma_start_mmio (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; - u8 dmactl; - - /* start host DMA transaction */ - dmactl = readb(mmio + ATA_DMA_CMD); - writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD); - - /* Strictly, one may wish to issue a readb() here, to - * flush the mmio write. However, control also passes - * to the hardware at this point, and it will interrupt - * us when we are to resume control. So, in effect, - * we don't care when the mmio write flushes. - * Further, a read of the DMA status register _immediately_ - * following the write may not be what certain flaky hardware - * is expected, so I think it is best to not add a readb() - * without first all the MMIO ATA cards/mobos. - * Or maybe I'm just being paranoid. - */ -} - -/** - * ata_bmdma_setup_pio - Set up PCI IDE BMDMA transaction (PIO) - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_bmdma_setup_pio (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); - u8 dmactl; - - /* load PRD table addr. */ - outl(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS); - - /* specify data direction, triple-check start bit is clear */ - dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); - if (!rw) - dmactl |= ATA_DMA_WR; - outb(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - - /* issue r/w command */ - ap->ops->exec_command(ap, &qc->tf); -} - -/** - * ata_bmdma_start_pio - Start a PCI IDE BMDMA transaction (PIO) - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_bmdma_start_pio (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - u8 dmactl; - - /* start host DMA transaction */ - dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - outb(dmactl | ATA_DMA_START, - ap->ioaddr.bmdma_addr + ATA_DMA_CMD); -} - - -/** - * ata_bmdma_start - Start a PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * Writes the ATA_DMA_START flag to the DMA command register. - * - * May be used as the bmdma_start() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_bmdma_start(struct ata_queued_cmd *qc) -{ - if (qc->ap->flags & ATA_FLAG_MMIO) - ata_bmdma_start_mmio(qc); - else - ata_bmdma_start_pio(qc); -} - - -/** - * ata_bmdma_setup - Set up PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * Writes address of PRD table to device's PRD Table Address - * register, sets the DMA control register, and calls - * ops->exec_command() to start the transfer. - * - * May be used as the bmdma_setup() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_bmdma_setup(struct ata_queued_cmd *qc) -{ - if (qc->ap->flags & ATA_FLAG_MMIO) - ata_bmdma_setup_mmio(qc); - else - ata_bmdma_setup_pio(qc); -} - - -/** - * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt. - * @ap: Port associated with this ATA transaction. - * - * Clear interrupt and error flags in DMA status register. - * - * May be used as the irq_clear() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -void ata_bmdma_irq_clear(struct ata_port *ap) -{ - if (!ap->ioaddr.bmdma_addr) - return; - - if (ap->flags & ATA_FLAG_MMIO) { - void __iomem *mmio = - ((void __iomem *) ap->ioaddr.bmdma_addr) + ATA_DMA_STATUS; - writeb(readb(mmio), mmio); - } else { - unsigned long addr = ap->ioaddr.bmdma_addr + ATA_DMA_STATUS; - outb(inb(addr), addr); - } -} - - -/** - * ata_bmdma_status - Read PCI IDE BMDMA status - * @ap: Port associated with this ATA transaction. - * - * Read and return BMDMA status register. - * - * May be used as the bmdma_status() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -u8 ata_bmdma_status(struct ata_port *ap) -{ - u8 host_stat; - if (ap->flags & ATA_FLAG_MMIO) { - void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; - host_stat = readb(mmio + ATA_DMA_STATUS); - } else - host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); - return host_stat; -} - - -/** - * ata_bmdma_stop - Stop PCI IDE BMDMA transfer - * @qc: Command we are ending DMA for - * - * Clears the ATA_DMA_START flag in the dma control register - * - * May be used as the bmdma_stop() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -void ata_bmdma_stop(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - if (ap->flags & ATA_FLAG_MMIO) { - void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; - - /* clear start/stop bit */ - writeb(readb(mmio + ATA_DMA_CMD) & ~ATA_DMA_START, - mmio + ATA_DMA_CMD); - } else { - /* clear start/stop bit */ - outb(inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD) & ~ATA_DMA_START, - ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - } - - /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ - ata_altstatus(ap); /* dummy read */ -} - -/** - * ata_bmdma_freeze - Freeze BMDMA controller port - * @ap: port to freeze - * - * Freeze BMDMA controller port. - * - * LOCKING: - * Inherited from caller. - */ -void ata_bmdma_freeze(struct ata_port *ap) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - ap->ctl |= ATA_NIEN; - ap->last_ctl = ap->ctl; - - if (ap->flags & ATA_FLAG_MMIO) - writeb(ap->ctl, (void __iomem *)ioaddr->ctl_addr); - else - outb(ap->ctl, ioaddr->ctl_addr); -} - -/** - * ata_bmdma_thaw - Thaw BMDMA controller port - * @ap: port to thaw - * - * Thaw BMDMA controller port. - * - * LOCKING: - * Inherited from caller. - */ -void ata_bmdma_thaw(struct ata_port *ap) -{ - /* clear & re-enable interrupts */ - ata_chk_status(ap); - ap->ops->irq_clear(ap); - if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */ - ata_irq_on(ap); -} - -/** - * ata_bmdma_drive_eh - Perform EH with given methods for BMDMA controller - * @ap: port to handle error for - * @prereset: prereset method (can be NULL) - * @softreset: softreset method (can be NULL) - * @hardreset: hardreset method (can be NULL) - * @postreset: postreset method (can be NULL) - * - * Handle error for ATA BMDMA controller. It can handle both - * PATA and SATA controllers. Many controllers should be able to - * use this EH as-is or with some added handling before and - * after. - * - * This function is intended to be used for constructing - * ->error_handler callback by low level drivers. - * - * LOCKING: - * Kernel thread context (may sleep) - */ -void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset, - ata_reset_fn_t softreset, ata_reset_fn_t hardreset, - ata_postreset_fn_t postreset) -{ - struct ata_eh_context *ehc = &ap->eh_context; - struct ata_queued_cmd *qc; - unsigned long flags; - int thaw = 0; - - qc = __ata_qc_from_tag(ap, ap->active_tag); - if (qc && !(qc->flags & ATA_QCFLAG_FAILED)) - qc = NULL; - - /* reset PIO HSM and stop DMA engine */ - spin_lock_irqsave(ap->lock, flags); - - ap->hsm_task_state = HSM_ST_IDLE; - - if (qc && (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_DMA)) { - u8 host_stat; - - host_stat = ata_bmdma_status(ap); - - ata_ehi_push_desc(&ehc->i, "BMDMA stat 0x%x", host_stat); - - /* BMDMA controllers indicate host bus error by - * setting DMA_ERR bit and timing out. As it wasn't - * really a timeout event, adjust error mask and - * cancel frozen state. - */ - if (qc->err_mask == AC_ERR_TIMEOUT && host_stat & ATA_DMA_ERR) { - qc->err_mask = AC_ERR_HOST_BUS; - thaw = 1; - } - - ap->ops->bmdma_stop(qc); - } - - ata_altstatus(ap); - ata_chk_status(ap); - ap->ops->irq_clear(ap); - - spin_unlock_irqrestore(ap->lock, flags); - - if (thaw) - ata_eh_thaw_port(ap); - - /* PIO and DMA engines have been stopped, perform recovery */ - ata_do_eh(ap, prereset, softreset, hardreset, postreset); -} - -/** - * ata_bmdma_error_handler - Stock error handler for BMDMA controller - * @ap: port to handle error for - * - * Stock error handler for BMDMA controller. - * - * LOCKING: - * Kernel thread context (may sleep) - */ -void ata_bmdma_error_handler(struct ata_port *ap) -{ - ata_reset_fn_t hardreset; - - hardreset = NULL; - if (sata_scr_valid(ap)) - hardreset = sata_std_hardreset; - - ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, hardreset, - ata_std_postreset); -} - -/** - * ata_bmdma_post_internal_cmd - Stock post_internal_cmd for - * BMDMA controller - * @qc: internal command to clean up - * - * LOCKING: - * Kernel thread context (may sleep) - */ -void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc) -{ - ata_bmdma_stop(qc); -} - -#ifdef CONFIG_PCI -/** - * ata_pci_init_native_mode - Initialize native-mode driver - * @pdev: pci device to be initialized - * @port: array[2] of pointers to port info structures. - * @ports: bitmap of ports present - * - * Utility function which allocates and initializes an - * ata_probe_ent structure for a standard dual-port - * PIO-based IDE controller. The returned ata_probe_ent - * structure can be passed to ata_device_add(). The returned - * ata_probe_ent structure should then be freed with kfree(). - * - * The caller need only pass the address of the primary port, the - * secondary will be deduced automatically. If the device has non - * standard secondary port mappings this function can be called twice, - * once for each interface. - */ - -struct ata_probe_ent * -ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports) -{ - struct ata_probe_ent *probe_ent = - ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); - int p = 0; - unsigned long bmdma; - - if (!probe_ent) - return NULL; - - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = IRQF_SHARED; - probe_ent->private_data = port[0]->private_data; - - if (ports & ATA_PORT_PRIMARY) { - probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 0); - probe_ent->port[p].altstatus_addr = - probe_ent->port[p].ctl_addr = - pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS; - bmdma = pci_resource_start(pdev, 4); - if (bmdma) { - if (inb(bmdma + 2) & 0x80) - probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; - probe_ent->port[p].bmdma_addr = bmdma; - } - ata_std_ports(&probe_ent->port[p]); - p++; - } - - if (ports & ATA_PORT_SECONDARY) { - probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 2); - probe_ent->port[p].altstatus_addr = - probe_ent->port[p].ctl_addr = - pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS; - bmdma = pci_resource_start(pdev, 4); - if (bmdma) { - bmdma += 8; - if(inb(bmdma + 2) & 0x80) - probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; - probe_ent->port[p].bmdma_addr = bmdma; - } - ata_std_ports(&probe_ent->port[p]); - p++; - } - - probe_ent->n_ports = p; - return probe_ent; -} - - -static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, - struct ata_port_info **port, int port_mask) -{ - struct ata_probe_ent *probe_ent; - unsigned long bmdma = pci_resource_start(pdev, 4); - - probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); - if (!probe_ent) - return NULL; - - probe_ent->n_ports = 2; - probe_ent->private_data = port[0]->private_data; - - if (port_mask & ATA_PORT_PRIMARY) { - probe_ent->irq = 14; - probe_ent->port[0].cmd_addr = ATA_PRIMARY_CMD; - probe_ent->port[0].altstatus_addr = - probe_ent->port[0].ctl_addr = ATA_PRIMARY_CTL; - if (bmdma) { - probe_ent->port[0].bmdma_addr = bmdma; - if (inb(bmdma + 2) & 0x80) - probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; - } - ata_std_ports(&probe_ent->port[0]); - } else - probe_ent->dummy_port_mask |= ATA_PORT_PRIMARY; - - if (port_mask & ATA_PORT_SECONDARY) { - if (probe_ent->irq) - probe_ent->irq2 = 15; - else - probe_ent->irq = 15; - probe_ent->port[1].cmd_addr = ATA_SECONDARY_CMD; - probe_ent->port[1].altstatus_addr = - probe_ent->port[1].ctl_addr = ATA_SECONDARY_CTL; - if (bmdma) { - probe_ent->port[1].bmdma_addr = bmdma + 8; - if (inb(bmdma + 10) & 0x80) - probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; - } - ata_std_ports(&probe_ent->port[1]); - } else - probe_ent->dummy_port_mask |= ATA_PORT_SECONDARY; - - return probe_ent; -} - - -/** - * ata_pci_init_one - Initialize/register PCI IDE host controller - * @pdev: Controller to be initialized - * @port_info: Information from low-level host driver - * @n_ports: Number of ports attached to host controller - * - * This is a helper function which can be called from a driver's - * xxx_init_one() probe function if the hardware uses traditional - * IDE taskfile registers. - * - * This function calls pci_enable_device(), reserves its register - * regions, sets the dma mask, enables bus master mode, and calls - * ata_device_add() - * - * ASSUMPTION: - * Nobody makes a single channel controller that appears solely as - * the secondary legacy port on PCI. - * - * LOCKING: - * Inherited from PCI layer (may sleep). - * - * RETURNS: - * Zero on success, negative on errno-based value on error. - */ - -int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, - unsigned int n_ports) -{ - struct ata_probe_ent *probe_ent = NULL; - struct ata_port_info *port[2]; - u8 tmp8, mask; - unsigned int legacy_mode = 0; - int disable_dev_on_err = 1; - int rc; - - DPRINTK("ENTER\n"); - - port[0] = port_info[0]; - if (n_ports > 1) - port[1] = port_info[1]; - else - port[1] = port[0]; - - if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0 - && (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { - /* TODO: What if one channel is in native mode ... */ - pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); - mask = (1 << 2) | (1 << 0); - if ((tmp8 & mask) != mask) - legacy_mode = (1 << 3); - } - - /* FIXME... */ - if ((!legacy_mode) && (n_ports > 2)) { - printk(KERN_ERR "ata: BUG: native mode, n_ports > 2\n"); - n_ports = 2; - /* For now */ - } - - /* FIXME: Really for ATA it isn't safe because the device may be - multi-purpose and we want to leave it alone if it was already - enabled. Secondly for shared use as Arjan says we want refcounting - - Checking dev->is_enabled is insufficient as this is not set at - boot for the primary video which is BIOS enabled - */ - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - disable_dev_on_err = 0; - goto err_out; - } - - if (legacy_mode) { - if (!request_region(ATA_PRIMARY_CMD, 8, "libata")) { - struct resource *conflict, res; - res.start = ATA_PRIMARY_CMD; - res.end = ATA_PRIMARY_CMD + 8 - 1; - conflict = ____request_resource(&ioport_resource, &res); - if (!strcmp(conflict->name, "libata")) - legacy_mode |= ATA_PORT_PRIMARY; - else { - disable_dev_on_err = 0; - printk(KERN_WARNING "ata: 0x%0X IDE port busy\n", ATA_PRIMARY_CMD); - } - } else - legacy_mode |= ATA_PORT_PRIMARY; - - if (!request_region(ATA_SECONDARY_CMD, 8, "libata")) { - struct resource *conflict, res; - res.start = ATA_SECONDARY_CMD; - res.end = ATA_SECONDARY_CMD + 8 - 1; - conflict = ____request_resource(&ioport_resource, &res); - if (!strcmp(conflict->name, "libata")) - legacy_mode |= ATA_PORT_SECONDARY; - else { - disable_dev_on_err = 0; - printk(KERN_WARNING "ata: 0x%X IDE port busy\n", ATA_SECONDARY_CMD); - } - } else - legacy_mode |= ATA_PORT_SECONDARY; - } - - /* we have legacy mode, but all ports are unavailable */ - if (legacy_mode == (1 << 3)) { - rc = -EBUSY; - goto err_out_regions; - } - - /* FIXME: If we get no DMA mask we should fall back to PIO */ - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - - if (legacy_mode) { - probe_ent = ata_pci_init_legacy_port(pdev, port, legacy_mode); - } else { - if (n_ports == 2) - probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); - else - probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY); - } - if (!probe_ent) { - rc = -ENOMEM; - goto err_out_regions; - } - - pci_set_master(pdev); - - /* FIXME: check ata_device_add return */ - ata_device_add(probe_ent); - - kfree(probe_ent); - - return 0; - -err_out_regions: - if (legacy_mode & ATA_PORT_PRIMARY) - release_region(ATA_PRIMARY_CMD, 8); - if (legacy_mode & ATA_PORT_SECONDARY) - release_region(ATA_SECONDARY_CMD, 8); - pci_release_regions(pdev); -err_out: - if (disable_dev_on_err) - pci_disable_device(pdev); - return rc; -} - -/** - * ata_pci_clear_simplex - attempt to kick device out of simplex - * @pdev: PCI device - * - * Some PCI ATA devices report simplex mode but in fact can be told to - * enter non simplex mode. This implements the neccessary logic to - * perform the task on such devices. Calling it on other devices will - * have -undefined- behaviour. - */ - -int ata_pci_clear_simplex(struct pci_dev *pdev) -{ - unsigned long bmdma = pci_resource_start(pdev, 4); - u8 simplex; - - if (bmdma == 0) - return -ENOENT; - - simplex = inb(bmdma + 0x02); - outb(simplex & 0x60, bmdma + 0x02); - simplex = inb(bmdma + 0x02); - if (simplex & 0x80) - return -EOPNOTSUPP; - return 0; -} - -unsigned long ata_pci_default_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long xfer_mask) -{ - /* Filter out DMA modes if the device has been configured by - the BIOS as PIO only */ - - if (ap->ioaddr.bmdma_addr == 0) - xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); - return xfer_mask; -} - -#endif /* CONFIG_PCI */ - diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c deleted file mode 100644 index 3f963f206d4..00000000000 --- a/drivers/scsi/libata-core.c +++ /dev/null @@ -1,6098 +0,0 @@ -/* - * libata-core.c - helper library for ATA - * - * Maintained by: Jeff Garzik - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * Copyright 2003-2004 Red Hat, Inc. All rights reserved. - * Copyright 2003-2004 Jeff Garzik - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Hardware documentation available from http://www.t13.org/ and - * http://www.sata-io.org/ - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "scsi_priv.h" -#include -#include -#include -#include -#include -#include - -#include "libata.h" - -/* debounce timing parameters in msecs { interval, duration, timeout } */ -const unsigned long sata_deb_timing_normal[] = { 5, 100, 2000 }; -const unsigned long sata_deb_timing_hotplug[] = { 25, 500, 2000 }; -const unsigned long sata_deb_timing_long[] = { 100, 2000, 5000 }; - -static unsigned int ata_dev_init_params(struct ata_device *dev, - u16 heads, u16 sectors); -static unsigned int ata_dev_set_xfermode(struct ata_device *dev); -static void ata_dev_xfermask(struct ata_device *dev); - -static unsigned int ata_unique_id = 1; -static struct workqueue_struct *ata_wq; - -struct workqueue_struct *ata_aux_wq; - -int atapi_enabled = 1; -module_param(atapi_enabled, int, 0444); -MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)"); - -int atapi_dmadir = 0; -module_param(atapi_dmadir, int, 0444); -MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off, 1=on)"); - -int libata_fua = 0; -module_param_named(fua, libata_fua, int, 0444); -MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)"); - -static int ata_probe_timeout = ATA_TMOUT_INTERNAL / HZ; -module_param(ata_probe_timeout, int, 0444); -MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)"); - -MODULE_AUTHOR("Jeff Garzik"); -MODULE_DESCRIPTION("Library module for ATA devices"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(DRV_VERSION); - - -/** - * ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure - * @tf: Taskfile to convert - * @fis: Buffer into which data will output - * @pmp: Port multiplier port - * - * Converts a standard ATA taskfile to a Serial ATA - * FIS structure (Register - Host to Device). - * - * LOCKING: - * Inherited from caller. - */ - -void ata_tf_to_fis(const struct ata_taskfile *tf, u8 *fis, u8 pmp) -{ - fis[0] = 0x27; /* Register - Host to Device FIS */ - fis[1] = (pmp & 0xf) | (1 << 7); /* Port multiplier number, - bit 7 indicates Command FIS */ - fis[2] = tf->command; - fis[3] = tf->feature; - - fis[4] = tf->lbal; - fis[5] = tf->lbam; - fis[6] = tf->lbah; - fis[7] = tf->device; - - fis[8] = tf->hob_lbal; - fis[9] = tf->hob_lbam; - fis[10] = tf->hob_lbah; - fis[11] = tf->hob_feature; - - fis[12] = tf->nsect; - fis[13] = tf->hob_nsect; - fis[14] = 0; - fis[15] = tf->ctl; - - fis[16] = 0; - fis[17] = 0; - fis[18] = 0; - fis[19] = 0; -} - -/** - * ata_tf_from_fis - Convert SATA FIS to ATA taskfile - * @fis: Buffer from which data will be input - * @tf: Taskfile to output - * - * Converts a serial ATA FIS structure to a standard ATA taskfile. - * - * LOCKING: - * Inherited from caller. - */ - -void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf) -{ - tf->command = fis[2]; /* status */ - tf->feature = fis[3]; /* error */ - - tf->lbal = fis[4]; - tf->lbam = fis[5]; - tf->lbah = fis[6]; - tf->device = fis[7]; - - tf->hob_lbal = fis[8]; - tf->hob_lbam = fis[9]; - tf->hob_lbah = fis[10]; - - tf->nsect = fis[12]; - tf->hob_nsect = fis[13]; -} - -static const u8 ata_rw_cmds[] = { - /* pio multi */ - ATA_CMD_READ_MULTI, - ATA_CMD_WRITE_MULTI, - ATA_CMD_READ_MULTI_EXT, - ATA_CMD_WRITE_MULTI_EXT, - 0, - 0, - 0, - ATA_CMD_WRITE_MULTI_FUA_EXT, - /* pio */ - ATA_CMD_PIO_READ, - ATA_CMD_PIO_WRITE, - ATA_CMD_PIO_READ_EXT, - ATA_CMD_PIO_WRITE_EXT, - 0, - 0, - 0, - 0, - /* dma */ - ATA_CMD_READ, - ATA_CMD_WRITE, - ATA_CMD_READ_EXT, - ATA_CMD_WRITE_EXT, - 0, - 0, - 0, - ATA_CMD_WRITE_FUA_EXT -}; - -/** - * ata_rwcmd_protocol - set taskfile r/w commands and protocol - * @qc: command to examine and configure - * - * Examine the device configuration and tf->flags to calculate - * the proper read/write commands and protocol to use. - * - * LOCKING: - * caller. - */ -int ata_rwcmd_protocol(struct ata_queued_cmd *qc) -{ - struct ata_taskfile *tf = &qc->tf; - struct ata_device *dev = qc->dev; - u8 cmd; - - int index, fua, lba48, write; - - fua = (tf->flags & ATA_TFLAG_FUA) ? 4 : 0; - lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0; - write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0; - - if (dev->flags & ATA_DFLAG_PIO) { - tf->protocol = ATA_PROT_PIO; - index = dev->multi_count ? 0 : 8; - } else if (lba48 && (qc->ap->flags & ATA_FLAG_PIO_LBA48)) { - /* Unable to use DMA due to host limitation */ - tf->protocol = ATA_PROT_PIO; - index = dev->multi_count ? 0 : 8; - } else { - tf->protocol = ATA_PROT_DMA; - index = 16; - } - - cmd = ata_rw_cmds[index + fua + lba48 + write]; - if (cmd) { - tf->command = cmd; - return 0; - } - return -1; -} - -/** - * ata_pack_xfermask - Pack pio, mwdma and udma masks into xfer_mask - * @pio_mask: pio_mask - * @mwdma_mask: mwdma_mask - * @udma_mask: udma_mask - * - * Pack @pio_mask, @mwdma_mask and @udma_mask into a single - * unsigned int xfer_mask. - * - * LOCKING: - * None. - * - * RETURNS: - * Packed xfer_mask. - */ -static unsigned int ata_pack_xfermask(unsigned int pio_mask, - unsigned int mwdma_mask, - unsigned int udma_mask) -{ - return ((pio_mask << ATA_SHIFT_PIO) & ATA_MASK_PIO) | - ((mwdma_mask << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA) | - ((udma_mask << ATA_SHIFT_UDMA) & ATA_MASK_UDMA); -} - -/** - * ata_unpack_xfermask - Unpack xfer_mask into pio, mwdma and udma masks - * @xfer_mask: xfer_mask to unpack - * @pio_mask: resulting pio_mask - * @mwdma_mask: resulting mwdma_mask - * @udma_mask: resulting udma_mask - * - * Unpack @xfer_mask into @pio_mask, @mwdma_mask and @udma_mask. - * Any NULL distination masks will be ignored. - */ -static void ata_unpack_xfermask(unsigned int xfer_mask, - unsigned int *pio_mask, - unsigned int *mwdma_mask, - unsigned int *udma_mask) -{ - if (pio_mask) - *pio_mask = (xfer_mask & ATA_MASK_PIO) >> ATA_SHIFT_PIO; - if (mwdma_mask) - *mwdma_mask = (xfer_mask & ATA_MASK_MWDMA) >> ATA_SHIFT_MWDMA; - if (udma_mask) - *udma_mask = (xfer_mask & ATA_MASK_UDMA) >> ATA_SHIFT_UDMA; -} - -static const struct ata_xfer_ent { - int shift, bits; - u8 base; -} ata_xfer_tbl[] = { - { ATA_SHIFT_PIO, ATA_BITS_PIO, XFER_PIO_0 }, - { ATA_SHIFT_MWDMA, ATA_BITS_MWDMA, XFER_MW_DMA_0 }, - { ATA_SHIFT_UDMA, ATA_BITS_UDMA, XFER_UDMA_0 }, - { -1, }, -}; - -/** - * ata_xfer_mask2mode - Find matching XFER_* for the given xfer_mask - * @xfer_mask: xfer_mask of interest - * - * Return matching XFER_* value for @xfer_mask. Only the highest - * bit of @xfer_mask is considered. - * - * LOCKING: - * None. - * - * RETURNS: - * Matching XFER_* value, 0 if no match found. - */ -static u8 ata_xfer_mask2mode(unsigned int xfer_mask) -{ - int highbit = fls(xfer_mask) - 1; - const struct ata_xfer_ent *ent; - - for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) - if (highbit >= ent->shift && highbit < ent->shift + ent->bits) - return ent->base + highbit - ent->shift; - return 0; -} - -/** - * ata_xfer_mode2mask - Find matching xfer_mask for XFER_* - * @xfer_mode: XFER_* of interest - * - * Return matching xfer_mask for @xfer_mode. - * - * LOCKING: - * None. - * - * RETURNS: - * Matching xfer_mask, 0 if no match found. - */ -static unsigned int ata_xfer_mode2mask(u8 xfer_mode) -{ - const struct ata_xfer_ent *ent; - - for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) - if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) - return 1 << (ent->shift + xfer_mode - ent->base); - return 0; -} - -/** - * ata_xfer_mode2shift - Find matching xfer_shift for XFER_* - * @xfer_mode: XFER_* of interest - * - * Return matching xfer_shift for @xfer_mode. - * - * LOCKING: - * None. - * - * RETURNS: - * Matching xfer_shift, -1 if no match found. - */ -static int ata_xfer_mode2shift(unsigned int xfer_mode) -{ - const struct ata_xfer_ent *ent; - - for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) - if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) - return ent->shift; - return -1; -} - -/** - * ata_mode_string - convert xfer_mask to string - * @xfer_mask: mask of bits supported; only highest bit counts. - * - * Determine string which represents the highest speed - * (highest bit in @modemask). - * - * LOCKING: - * None. - * - * RETURNS: - * Constant C string representing highest speed listed in - * @mode_mask, or the constant C string "". - */ -static const char *ata_mode_string(unsigned int xfer_mask) -{ - static const char * const xfer_mode_str[] = { - "PIO0", - "PIO1", - "PIO2", - "PIO3", - "PIO4", - "MWDMA0", - "MWDMA1", - "MWDMA2", - "UDMA/16", - "UDMA/25", - "UDMA/33", - "UDMA/44", - "UDMA/66", - "UDMA/100", - "UDMA/133", - "UDMA7", - }; - int highbit; - - highbit = fls(xfer_mask) - 1; - if (highbit >= 0 && highbit < ARRAY_SIZE(xfer_mode_str)) - return xfer_mode_str[highbit]; - return ""; -} - -static const char *sata_spd_string(unsigned int spd) -{ - static const char * const spd_str[] = { - "1.5 Gbps", - "3.0 Gbps", - }; - - if (spd == 0 || (spd - 1) >= ARRAY_SIZE(spd_str)) - return ""; - return spd_str[spd - 1]; -} - -void ata_dev_disable(struct ata_device *dev) -{ - if (ata_dev_enabled(dev) && ata_msg_drv(dev->ap)) { - ata_dev_printk(dev, KERN_WARNING, "disabled\n"); - dev->class++; - } -} - -/** - * ata_pio_devchk - PATA device presence detection - * @ap: ATA channel to examine - * @device: Device to examine (starting at zero) - * - * This technique was originally described in - * Hale Landis's ATADRVR (www.ata-atapi.com), and - * later found its way into the ATA/ATAPI spec. - * - * Write a pattern to the ATA shadow registers, - * and if a device is present, it will respond by - * correctly storing and echoing back the - * ATA shadow register contents. - * - * LOCKING: - * caller. - */ - -static unsigned int ata_pio_devchk(struct ata_port *ap, - unsigned int device) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - u8 nsect, lbal; - - ap->ops->dev_select(ap, device); - - outb(0x55, ioaddr->nsect_addr); - outb(0xaa, ioaddr->lbal_addr); - - outb(0xaa, ioaddr->nsect_addr); - outb(0x55, ioaddr->lbal_addr); - - outb(0x55, ioaddr->nsect_addr); - outb(0xaa, ioaddr->lbal_addr); - - nsect = inb(ioaddr->nsect_addr); - lbal = inb(ioaddr->lbal_addr); - - if ((nsect == 0x55) && (lbal == 0xaa)) - return 1; /* we found a device */ - - return 0; /* nothing found */ -} - -/** - * ata_mmio_devchk - PATA device presence detection - * @ap: ATA channel to examine - * @device: Device to examine (starting at zero) - * - * This technique was originally described in - * Hale Landis's ATADRVR (www.ata-atapi.com), and - * later found its way into the ATA/ATAPI spec. - * - * Write a pattern to the ATA shadow registers, - * and if a device is present, it will respond by - * correctly storing and echoing back the - * ATA shadow register contents. - * - * LOCKING: - * caller. - */ - -static unsigned int ata_mmio_devchk(struct ata_port *ap, - unsigned int device) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - u8 nsect, lbal; - - ap->ops->dev_select(ap, device); - - writeb(0x55, (void __iomem *) ioaddr->nsect_addr); - writeb(0xaa, (void __iomem *) ioaddr->lbal_addr); - - writeb(0xaa, (void __iomem *) ioaddr->nsect_addr); - writeb(0x55, (void __iomem *) ioaddr->lbal_addr); - - writeb(0x55, (void __iomem *) ioaddr->nsect_addr); - writeb(0xaa, (void __iomem *) ioaddr->lbal_addr); - - nsect = readb((void __iomem *) ioaddr->nsect_addr); - lbal = readb((void __iomem *) ioaddr->lbal_addr); - - if ((nsect == 0x55) && (lbal == 0xaa)) - return 1; /* we found a device */ - - return 0; /* nothing found */ -} - -/** - * ata_devchk - PATA device presence detection - * @ap: ATA channel to examine - * @device: Device to examine (starting at zero) - * - * Dispatch ATA device presence detection, depending - * on whether we are using PIO or MMIO to talk to the - * ATA shadow registers. - * - * LOCKING: - * caller. - */ - -static unsigned int ata_devchk(struct ata_port *ap, - unsigned int device) -{ - if (ap->flags & ATA_FLAG_MMIO) - return ata_mmio_devchk(ap, device); - return ata_pio_devchk(ap, device); -} - -/** - * ata_dev_classify - determine device type based on ATA-spec signature - * @tf: ATA taskfile register set for device to be identified - * - * Determine from taskfile register contents whether a device is - * ATA or ATAPI, as per "Signature and persistence" section - * of ATA/PI spec (volume 1, sect 5.14). - * - * LOCKING: - * None. - * - * RETURNS: - * Device type, %ATA_DEV_ATA, %ATA_DEV_ATAPI, or %ATA_DEV_UNKNOWN - * the event of failure. - */ - -unsigned int ata_dev_classify(const struct ata_taskfile *tf) -{ - /* Apple's open source Darwin code hints that some devices only - * put a proper signature into the LBA mid/high registers, - * So, we only check those. It's sufficient for uniqueness. - */ - - if (((tf->lbam == 0) && (tf->lbah == 0)) || - ((tf->lbam == 0x3c) && (tf->lbah == 0xc3))) { - DPRINTK("found ATA device by sig\n"); - return ATA_DEV_ATA; - } - - if (((tf->lbam == 0x14) && (tf->lbah == 0xeb)) || - ((tf->lbam == 0x69) && (tf->lbah == 0x96))) { - DPRINTK("found ATAPI device by sig\n"); - return ATA_DEV_ATAPI; - } - - DPRINTK("unknown device\n"); - return ATA_DEV_UNKNOWN; -} - -/** - * ata_dev_try_classify - Parse returned ATA device signature - * @ap: ATA channel to examine - * @device: Device to examine (starting at zero) - * @r_err: Value of error register on completion - * - * After an event -- SRST, E.D.D., or SATA COMRESET -- occurs, - * an ATA/ATAPI-defined set of values is placed in the ATA - * shadow registers, indicating the results of device detection - * and diagnostics. - * - * Select the ATA device, and read the values from the ATA shadow - * registers. Then parse according to the Error register value, - * and the spec-defined values examined by ata_dev_classify(). - * - * LOCKING: - * caller. - * - * RETURNS: - * Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE. - */ - -static unsigned int -ata_dev_try_classify(struct ata_port *ap, unsigned int device, u8 *r_err) -{ - struct ata_taskfile tf; - unsigned int class; - u8 err; - - ap->ops->dev_select(ap, device); - - memset(&tf, 0, sizeof(tf)); - - ap->ops->tf_read(ap, &tf); - err = tf.feature; - if (r_err) - *r_err = err; - - /* see if device passed diags */ - if (err == 1) - /* do nothing */ ; - else if ((device == 0) && (err == 0x81)) - /* do nothing */ ; - else - return ATA_DEV_NONE; - - /* determine if device is ATA or ATAPI */ - class = ata_dev_classify(&tf); - - if (class == ATA_DEV_UNKNOWN) - return ATA_DEV_NONE; - if ((class == ATA_DEV_ATA) && (ata_chk_status(ap) == 0)) - return ATA_DEV_NONE; - return class; -} - -/** - * ata_id_string - Convert IDENTIFY DEVICE page into string - * @id: IDENTIFY DEVICE results we will examine - * @s: string into which data is output - * @ofs: offset into identify device page - * @len: length of string to return. must be an even number. - * - * The strings in the IDENTIFY DEVICE page are broken up into - * 16-bit chunks. Run through the string, and output each - * 8-bit chunk linearly, regardless of platform. - * - * LOCKING: - * caller. - */ - -void ata_id_string(const u16 *id, unsigned char *s, - unsigned int ofs, unsigned int len) -{ - unsigned int c; - - while (len > 0) { - c = id[ofs] >> 8; - *s = c; - s++; - - c = id[ofs] & 0xff; - *s = c; - s++; - - ofs++; - len -= 2; - } -} - -/** - * ata_id_c_string - Convert IDENTIFY DEVICE page into C string - * @id: IDENTIFY DEVICE results we will examine - * @s: string into which data is output - * @ofs: offset into identify device page - * @len: length of string to return. must be an odd number. - * - * This function is identical to ata_id_string except that it - * trims trailing spaces and terminates the resulting string with - * null. @len must be actual maximum length (even number) + 1. - * - * LOCKING: - * caller. - */ -void ata_id_c_string(const u16 *id, unsigned char *s, - unsigned int ofs, unsigned int len) -{ - unsigned char *p; - - WARN_ON(!(len & 1)); - - ata_id_string(id, s, ofs, len - 1); - - p = s + strnlen(s, len - 1); - while (p > s && p[-1] == ' ') - p--; - *p = '\0'; -} - -static u64 ata_id_n_sectors(const u16 *id) -{ - if (ata_id_has_lba(id)) { - if (ata_id_has_lba48(id)) - return ata_id_u64(id, 100); - else - return ata_id_u32(id, 60); - } else { - if (ata_id_current_chs_valid(id)) - return ata_id_u32(id, 57); - else - return id[1] * id[3] * id[6]; - } -} - -/** - * ata_noop_dev_select - Select device 0/1 on ATA bus - * @ap: ATA channel to manipulate - * @device: ATA device (numbered from zero) to select - * - * This function performs no actual function. - * - * May be used as the dev_select() entry in ata_port_operations. - * - * LOCKING: - * caller. - */ -void ata_noop_dev_select (struct ata_port *ap, unsigned int device) -{ -} - - -/** - * ata_std_dev_select - Select device 0/1 on ATA bus - * @ap: ATA channel to manipulate - * @device: ATA device (numbered from zero) to select - * - * Use the method defined in the ATA specification to - * make either device 0, or device 1, active on the - * ATA channel. Works with both PIO and MMIO. - * - * May be used as the dev_select() entry in ata_port_operations. - * - * LOCKING: - * caller. - */ - -void ata_std_dev_select (struct ata_port *ap, unsigned int device) -{ - u8 tmp; - - if (device == 0) - tmp = ATA_DEVICE_OBS; - else - tmp = ATA_DEVICE_OBS | ATA_DEV1; - - if (ap->flags & ATA_FLAG_MMIO) { - writeb(tmp, (void __iomem *) ap->ioaddr.device_addr); - } else { - outb(tmp, ap->ioaddr.device_addr); - } - ata_pause(ap); /* needed; also flushes, for mmio */ -} - -/** - * ata_dev_select - Select device 0/1 on ATA bus - * @ap: ATA channel to manipulate - * @device: ATA device (numbered from zero) to select - * @wait: non-zero to wait for Status register BSY bit to clear - * @can_sleep: non-zero if context allows sleeping - * - * Use the method defined in the ATA specification to - * make either device 0, or device 1, active on the - * ATA channel. - * - * This is a high-level version of ata_std_dev_select(), - * which additionally provides the services of inserting - * the proper pauses and status polling, where needed. - * - * LOCKING: - * caller. - */ - -void ata_dev_select(struct ata_port *ap, unsigned int device, - unsigned int wait, unsigned int can_sleep) -{ - if (ata_msg_probe(ap)) - ata_port_printk(ap, KERN_INFO, "ata_dev_select: ENTER, ata%u: " - "device %u, wait %u\n", ap->id, device, wait); - - if (wait) - ata_wait_idle(ap); - - ap->ops->dev_select(ap, device); - - if (wait) { - if (can_sleep && ap->device[device].class == ATA_DEV_ATAPI) - msleep(150); - ata_wait_idle(ap); - } -} - -/** - * ata_dump_id - IDENTIFY DEVICE info debugging output - * @id: IDENTIFY DEVICE page to dump - * - * Dump selected 16-bit words from the given IDENTIFY DEVICE - * page. - * - * LOCKING: - * caller. - */ - -static inline void ata_dump_id(const u16 *id) -{ - DPRINTK("49==0x%04x " - "53==0x%04x " - "63==0x%04x " - "64==0x%04x " - "75==0x%04x \n", - id[49], - id[53], - id[63], - id[64], - id[75]); - DPRINTK("80==0x%04x " - "81==0x%04x " - "82==0x%04x " - "83==0x%04x " - "84==0x%04x \n", - id[80], - id[81], - id[82], - id[83], - id[84]); - DPRINTK("88==0x%04x " - "93==0x%04x\n", - id[88], - id[93]); -} - -/** - * ata_id_xfermask - Compute xfermask from the given IDENTIFY data - * @id: IDENTIFY data to compute xfer mask from - * - * Compute the xfermask for this device. This is not as trivial - * as it seems if we must consider early devices correctly. - * - * FIXME: pre IDE drive timing (do we care ?). - * - * LOCKING: - * None. - * - * RETURNS: - * Computed xfermask - */ -static unsigned int ata_id_xfermask(const u16 *id) -{ - unsigned int pio_mask, mwdma_mask, udma_mask; - - /* Usual case. Word 53 indicates word 64 is valid */ - if (id[ATA_ID_FIELD_VALID] & (1 << 1)) { - pio_mask = id[ATA_ID_PIO_MODES] & 0x03; - pio_mask <<= 3; - pio_mask |= 0x7; - } else { - /* If word 64 isn't valid then Word 51 high byte holds - * the PIO timing number for the maximum. Turn it into - * a mask. - */ - pio_mask = (2 << (id[ATA_ID_OLD_PIO_MODES] & 0xFF)) - 1 ; - - /* But wait.. there's more. Design your standards by - * committee and you too can get a free iordy field to - * process. However its the speeds not the modes that - * are supported... Note drivers using the timing API - * will get this right anyway - */ - } - - mwdma_mask = id[ATA_ID_MWDMA_MODES] & 0x07; - - udma_mask = 0; - if (id[ATA_ID_FIELD_VALID] & (1 << 2)) - udma_mask = id[ATA_ID_UDMA_MODES] & 0xff; - - return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask); -} - -/** - * ata_port_queue_task - Queue port_task - * @ap: The ata_port to queue port_task for - * @fn: workqueue function to be scheduled - * @data: data value to pass to workqueue function - * @delay: delay time for workqueue function - * - * Schedule @fn(@data) for execution after @delay jiffies using - * port_task. There is one port_task per port and it's the - * user(low level driver)'s responsibility to make sure that only - * one task is active at any given time. - * - * libata core layer takes care of synchronization between - * port_task and EH. ata_port_queue_task() may be ignored for EH - * synchronization. - * - * LOCKING: - * Inherited from caller. - */ -void ata_port_queue_task(struct ata_port *ap, void (*fn)(void *), void *data, - unsigned long delay) -{ - int rc; - - if (ap->pflags & ATA_PFLAG_FLUSH_PORT_TASK) - return; - - PREPARE_WORK(&ap->port_task, fn, data); - - if (!delay) - rc = queue_work(ata_wq, &ap->port_task); - else - rc = queue_delayed_work(ata_wq, &ap->port_task, delay); - - /* rc == 0 means that another user is using port task */ - WARN_ON(rc == 0); -} - -/** - * ata_port_flush_task - Flush port_task - * @ap: The ata_port to flush port_task for - * - * After this function completes, port_task is guranteed not to - * be running or scheduled. - * - * LOCKING: - * Kernel thread context (may sleep) - */ -void ata_port_flush_task(struct ata_port *ap) -{ - unsigned long flags; - - DPRINTK("ENTER\n"); - - spin_lock_irqsave(ap->lock, flags); - ap->pflags |= ATA_PFLAG_FLUSH_PORT_TASK; - spin_unlock_irqrestore(ap->lock, flags); - - DPRINTK("flush #1\n"); - flush_workqueue(ata_wq); - - /* - * At this point, if a task is running, it's guaranteed to see - * the FLUSH flag; thus, it will never queue pio tasks again. - * Cancel and flush. - */ - if (!cancel_delayed_work(&ap->port_task)) { - if (ata_msg_ctl(ap)) - ata_port_printk(ap, KERN_DEBUG, "%s: flush #2\n", - __FUNCTION__); - flush_workqueue(ata_wq); - } - - spin_lock_irqsave(ap->lock, flags); - ap->pflags &= ~ATA_PFLAG_FLUSH_PORT_TASK; - spin_unlock_irqrestore(ap->lock, flags); - - if (ata_msg_ctl(ap)) - ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __FUNCTION__); -} - -void ata_qc_complete_internal(struct ata_queued_cmd *qc) -{ - struct completion *waiting = qc->private_data; - - complete(waiting); -} - -/** - * ata_exec_internal - execute libata internal command - * @dev: Device to which the command is sent - * @tf: Taskfile registers for the command and the result - * @cdb: CDB for packet command - * @dma_dir: Data tranfer direction of the command - * @buf: Data buffer of the command - * @buflen: Length of data buffer - * - * Executes libata internal command with timeout. @tf contains - * command on entry and result on return. Timeout and error - * conditions are reported via return value. No recovery action - * is taken after a command times out. It's caller's duty to - * clean up after timeout. - * - * LOCKING: - * None. Should be called with kernel context, might sleep. - * - * RETURNS: - * Zero on success, AC_ERR_* mask on failure - */ -unsigned ata_exec_internal(struct ata_device *dev, - struct ata_taskfile *tf, const u8 *cdb, - int dma_dir, void *buf, unsigned int buflen) -{ - struct ata_port *ap = dev->ap; - u8 command = tf->command; - struct ata_queued_cmd *qc; - unsigned int tag, preempted_tag; - u32 preempted_sactive, preempted_qc_active; - DECLARE_COMPLETION_ONSTACK(wait); - unsigned long flags; - unsigned int err_mask; - int rc; - - spin_lock_irqsave(ap->lock, flags); - - /* no internal command while frozen */ - if (ap->pflags & ATA_PFLAG_FROZEN) { - spin_unlock_irqrestore(ap->lock, flags); - return AC_ERR_SYSTEM; - } - - /* initialize internal qc */ - - /* XXX: Tag 0 is used for drivers with legacy EH as some - * drivers choke if any other tag is given. This breaks - * ata_tag_internal() test for those drivers. Don't use new - * EH stuff without converting to it. - */ - if (ap->ops->error_handler) - tag = ATA_TAG_INTERNAL; - else - tag = 0; - - if (test_and_set_bit(tag, &ap->qc_allocated)) - BUG(); - qc = __ata_qc_from_tag(ap, tag); - - qc->tag = tag; - qc->scsicmd = NULL; - qc->ap = ap; - qc->dev = dev; - ata_qc_reinit(qc); - - preempted_tag = ap->active_tag; - preempted_sactive = ap->sactive; - preempted_qc_active = ap->qc_active; - ap->active_tag = ATA_TAG_POISON; - ap->sactive = 0; - ap->qc_active = 0; - - /* prepare & issue qc */ - qc->tf = *tf; - if (cdb) - memcpy(qc->cdb, cdb, ATAPI_CDB_LEN); - qc->flags |= ATA_QCFLAG_RESULT_TF; - qc->dma_dir = dma_dir; - if (dma_dir != DMA_NONE) { - ata_sg_init_one(qc, buf, buflen); - qc->nsect = buflen / ATA_SECT_SIZE; - } - - qc->private_data = &wait; - qc->complete_fn = ata_qc_complete_internal; - - ata_qc_issue(qc); - - spin_unlock_irqrestore(ap->lock, flags); - - rc = wait_for_completion_timeout(&wait, ata_probe_timeout); - - ata_port_flush_task(ap); - - if (!rc) { - spin_lock_irqsave(ap->lock, flags); - - /* We're racing with irq here. If we lose, the - * following test prevents us from completing the qc - * twice. If we win, the port is frozen and will be - * cleaned up by ->post_internal_cmd(). - */ - if (qc->flags & ATA_QCFLAG_ACTIVE) { - qc->err_mask |= AC_ERR_TIMEOUT; - - if (ap->ops->error_handler) - ata_port_freeze(ap); - else - ata_qc_complete(qc); - - if (ata_msg_warn(ap)) - ata_dev_printk(dev, KERN_WARNING, - "qc timeout (cmd 0x%x)\n", command); - } - - spin_unlock_irqrestore(ap->lock, flags); - } - - /* do post_internal_cmd */ - if (ap->ops->post_internal_cmd) - ap->ops->post_internal_cmd(qc); - - if (qc->flags & ATA_QCFLAG_FAILED && !qc->err_mask) { - if (ata_msg_warn(ap)) - ata_dev_printk(dev, KERN_WARNING, - "zero err_mask for failed " - "internal command, assuming AC_ERR_OTHER\n"); - qc->err_mask |= AC_ERR_OTHER; - } - - /* finish up */ - spin_lock_irqsave(ap->lock, flags); - - *tf = qc->result_tf; - err_mask = qc->err_mask; - - ata_qc_free(qc); - ap->active_tag = preempted_tag; - ap->sactive = preempted_sactive; - ap->qc_active = preempted_qc_active; - - /* XXX - Some LLDDs (sata_mv) disable port on command failure. - * Until those drivers are fixed, we detect the condition - * here, fail the command with AC_ERR_SYSTEM and reenable the - * port. - * - * Note that this doesn't change any behavior as internal - * command failure results in disabling the device in the - * higher layer for LLDDs without new reset/EH callbacks. - * - * Kill the following code as soon as those drivers are fixed. - */ - if (ap->flags & ATA_FLAG_DISABLED) { - err_mask |= AC_ERR_SYSTEM; - ata_port_probe(ap); - } - - spin_unlock_irqrestore(ap->lock, flags); - - return err_mask; -} - -/** - * ata_do_simple_cmd - execute simple internal command - * @dev: Device to which the command is sent - * @cmd: Opcode to execute - * - * Execute a 'simple' command, that only consists of the opcode - * 'cmd' itself, without filling any other registers - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * Zero on success, AC_ERR_* mask on failure - */ -unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd) -{ - struct ata_taskfile tf; - - ata_tf_init(dev, &tf); - - tf.command = cmd; - tf.flags |= ATA_TFLAG_DEVICE; - tf.protocol = ATA_PROT_NODATA; - - return ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); -} - -/** - * ata_pio_need_iordy - check if iordy needed - * @adev: ATA device - * - * Check if the current speed of the device requires IORDY. Used - * by various controllers for chip configuration. - */ - -unsigned int ata_pio_need_iordy(const struct ata_device *adev) -{ - int pio; - int speed = adev->pio_mode - XFER_PIO_0; - - if (speed < 2) - return 0; - if (speed > 2) - return 1; - - /* If we have no drive specific rule, then PIO 2 is non IORDY */ - - if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE */ - pio = adev->id[ATA_ID_EIDE_PIO]; - /* Is the speed faster than the drive allows non IORDY ? */ - if (pio) { - /* This is cycle times not frequency - watch the logic! */ - if (pio > 240) /* PIO2 is 240nS per cycle */ - return 1; - return 0; - } - } - return 0; -} - -/** - * ata_dev_read_id - Read ID data from the specified device - * @dev: target device - * @p_class: pointer to class of the target device (may be changed) - * @post_reset: is this read ID post-reset? - * @id: buffer to read IDENTIFY data into - * - * Read ID data from the specified device. ATA_CMD_ID_ATA is - * performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI - * devices. This function also issues ATA_CMD_INIT_DEV_PARAMS - * for pre-ATA4 drives. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, - int post_reset, u16 *id) -{ - struct ata_port *ap = dev->ap; - unsigned int class = *p_class; - struct ata_taskfile tf; - unsigned int err_mask = 0; - const char *reason; - int rc; - - if (ata_msg_ctl(ap)) - ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n", - __FUNCTION__, ap->id, dev->devno); - - ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */ - - retry: - ata_tf_init(dev, &tf); - - switch (class) { - case ATA_DEV_ATA: - tf.command = ATA_CMD_ID_ATA; - break; - case ATA_DEV_ATAPI: - tf.command = ATA_CMD_ID_ATAPI; - break; - default: - rc = -ENODEV; - reason = "unsupported class"; - goto err_out; - } - - tf.protocol = ATA_PROT_PIO; - - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE, - id, sizeof(id[0]) * ATA_ID_WORDS); - if (err_mask) { - rc = -EIO; - reason = "I/O error"; - goto err_out; - } - - swap_buf_le16(id, ATA_ID_WORDS); - - /* sanity check */ - if ((class == ATA_DEV_ATA) != (ata_id_is_ata(id) | ata_id_is_cfa(id))) { - rc = -EINVAL; - reason = "device reports illegal type"; - goto err_out; - } - - if (post_reset && class == ATA_DEV_ATA) { - /* - * The exact sequence expected by certain pre-ATA4 drives is: - * SRST RESET - * IDENTIFY - * INITIALIZE DEVICE PARAMETERS - * anything else.. - * Some drives were very specific about that exact sequence. - */ - if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) { - err_mask = ata_dev_init_params(dev, id[3], id[6]); - if (err_mask) { - rc = -EIO; - reason = "INIT_DEV_PARAMS failed"; - goto err_out; - } - - /* current CHS translation info (id[53-58]) might be - * changed. reread the identify device info. - */ - post_reset = 0; - goto retry; - } - } - - *p_class = class; - - return 0; - - err_out: - if (ata_msg_warn(ap)) - ata_dev_printk(dev, KERN_WARNING, "failed to IDENTIFY " - "(%s, err_mask=0x%x)\n", reason, err_mask); - return rc; -} - -static inline u8 ata_dev_knobble(struct ata_device *dev) -{ - return ((dev->ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id))); -} - -static void ata_dev_config_ncq(struct ata_device *dev, - char *desc, size_t desc_sz) -{ - struct ata_port *ap = dev->ap; - int hdepth = 0, ddepth = ata_id_queue_depth(dev->id); - - if (!ata_id_has_ncq(dev->id)) { - desc[0] = '\0'; - return; - } - - if (ap->flags & ATA_FLAG_NCQ) { - hdepth = min(ap->host->can_queue, ATA_MAX_QUEUE - 1); - dev->flags |= ATA_DFLAG_NCQ; - } - - if (hdepth >= ddepth) - snprintf(desc, desc_sz, "NCQ (depth %d)", ddepth); - else - snprintf(desc, desc_sz, "NCQ (depth %d/%d)", hdepth, ddepth); -} - -static void ata_set_port_max_cmd_len(struct ata_port *ap) -{ - int i; - - if (ap->host) { - ap->host->max_cmd_len = 0; - for (i = 0; i < ATA_MAX_DEVICES; i++) - ap->host->max_cmd_len = max_t(unsigned int, - ap->host->max_cmd_len, - ap->device[i].cdb_len); - } -} - -/** - * ata_dev_configure - Configure the specified ATA/ATAPI device - * @dev: Target device to configure - * @print_info: Enable device info printout - * - * Configure @dev according to @dev->id. Generic and low-level - * driver specific fixups are also applied. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno otherwise - */ -int ata_dev_configure(struct ata_device *dev, int print_info) -{ - struct ata_port *ap = dev->ap; - const u16 *id = dev->id; - unsigned int xfer_mask; - int rc; - - if (!ata_dev_enabled(dev) && ata_msg_info(ap)) { - ata_dev_printk(dev, KERN_INFO, - "%s: ENTER/EXIT (host %u, dev %u) -- nodev\n", - __FUNCTION__, ap->id, dev->devno); - return 0; - } - - if (ata_msg_probe(ap)) - ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n", - __FUNCTION__, ap->id, dev->devno); - - /* print device capabilities */ - if (ata_msg_probe(ap)) - ata_dev_printk(dev, KERN_DEBUG, - "%s: cfg 49:%04x 82:%04x 83:%04x 84:%04x " - "85:%04x 86:%04x 87:%04x 88:%04x\n", - __FUNCTION__, - id[49], id[82], id[83], id[84], - id[85], id[86], id[87], id[88]); - - /* initialize to-be-configured parameters */ - dev->flags &= ~ATA_DFLAG_CFG_MASK; - dev->max_sectors = 0; - dev->cdb_len = 0; - dev->n_sectors = 0; - dev->cylinders = 0; - dev->heads = 0; - dev->sectors = 0; - - /* - * common ATA, ATAPI feature tests - */ - - /* find max transfer mode; for printk only */ - xfer_mask = ata_id_xfermask(id); - - if (ata_msg_probe(ap)) - ata_dump_id(id); - - /* ATA-specific feature tests */ - if (dev->class == ATA_DEV_ATA) { - dev->n_sectors = ata_id_n_sectors(id); - - if (ata_id_has_lba(id)) { - const char *lba_desc; - char ncq_desc[20]; - - lba_desc = "LBA"; - dev->flags |= ATA_DFLAG_LBA; - if (ata_id_has_lba48(id)) { - dev->flags |= ATA_DFLAG_LBA48; - lba_desc = "LBA48"; - } - - /* config NCQ */ - ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc)); - - /* print device info to dmesg */ - if (ata_msg_drv(ap) && print_info) - ata_dev_printk(dev, KERN_INFO, "ATA-%d, " - "max %s, %Lu sectors: %s %s\n", - ata_id_major_version(id), - ata_mode_string(xfer_mask), - (unsigned long long)dev->n_sectors, - lba_desc, ncq_desc); - } else { - /* CHS */ - - /* Default translation */ - dev->cylinders = id[1]; - dev->heads = id[3]; - dev->sectors = id[6]; - - if (ata_id_current_chs_valid(id)) { - /* Current CHS translation is valid. */ - dev->cylinders = id[54]; - dev->heads = id[55]; - dev->sectors = id[56]; - } - - /* print device info to dmesg */ - if (ata_msg_drv(ap) && print_info) - ata_dev_printk(dev, KERN_INFO, "ATA-%d, " - "max %s, %Lu sectors: CHS %u/%u/%u\n", - ata_id_major_version(id), - ata_mode_string(xfer_mask), - (unsigned long long)dev->n_sectors, - dev->cylinders, dev->heads, - dev->sectors); - } - - if (dev->id[59] & 0x100) { - dev->multi_count = dev->id[59] & 0xff; - if (ata_msg_drv(ap) && print_info) - ata_dev_printk(dev, KERN_INFO, - "ata%u: dev %u multi count %u\n", - ap->id, dev->devno, dev->multi_count); - } - - dev->cdb_len = 16; - } - - /* ATAPI-specific feature tests */ - else if (dev->class == ATA_DEV_ATAPI) { - char *cdb_intr_string = ""; - - rc = atapi_cdb_len(id); - if ((rc < 12) || (rc > ATAPI_CDB_LEN)) { - if (ata_msg_warn(ap)) - ata_dev_printk(dev, KERN_WARNING, - "unsupported CDB len\n"); - rc = -EINVAL; - goto err_out_nosup; - } - dev->cdb_len = (unsigned int) rc; - - if (ata_id_cdb_intr(dev->id)) { - dev->flags |= ATA_DFLAG_CDB_INTR; - cdb_intr_string = ", CDB intr"; - } - - /* print device info to dmesg */ - if (ata_msg_drv(ap) && print_info) - ata_dev_printk(dev, KERN_INFO, "ATAPI, max %s%s\n", - ata_mode_string(xfer_mask), - cdb_intr_string); - } - - ata_set_port_max_cmd_len(ap); - - /* limit bridge transfers to udma5, 200 sectors */ - if (ata_dev_knobble(dev)) { - if (ata_msg_drv(ap) && print_info) - ata_dev_printk(dev, KERN_INFO, - "applying bridge limits\n"); - dev->udma_mask &= ATA_UDMA5; - dev->max_sectors = ATA_MAX_SECTORS; - } - - if (ap->ops->dev_config) - ap->ops->dev_config(ap, dev); - - if (ata_msg_probe(ap)) - ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n", - __FUNCTION__, ata_chk_status(ap)); - return 0; - -err_out_nosup: - if (ata_msg_probe(ap)) - ata_dev_printk(dev, KERN_DEBUG, - "%s: EXIT, err\n", __FUNCTION__); - return rc; -} - -/** - * ata_bus_probe - Reset and probe ATA bus - * @ap: Bus to probe - * - * Master ATA bus probing function. Initiates a hardware-dependent - * bus reset, then attempts to identify any devices found on - * the bus. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - * RETURNS: - * Zero on success, negative errno otherwise. - */ - -int ata_bus_probe(struct ata_port *ap) -{ - unsigned int classes[ATA_MAX_DEVICES]; - int tries[ATA_MAX_DEVICES]; - int i, rc, down_xfermask; - struct ata_device *dev; - - ata_port_probe(ap); - - for (i = 0; i < ATA_MAX_DEVICES; i++) - tries[i] = ATA_PROBE_MAX_TRIES; - - retry: - down_xfermask = 0; - - /* reset and determine device classes */ - ap->ops->phy_reset(ap); - - for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; - - if (!(ap->flags & ATA_FLAG_DISABLED) && - dev->class != ATA_DEV_UNKNOWN) - classes[dev->devno] = dev->class; - else - classes[dev->devno] = ATA_DEV_NONE; - - dev->class = ATA_DEV_UNKNOWN; - } - - ata_port_probe(ap); - - /* after the reset the device state is PIO 0 and the controller - state is undefined. Record the mode */ - - for (i = 0; i < ATA_MAX_DEVICES; i++) - ap->device[i].pio_mode = XFER_PIO_0; - - /* read IDENTIFY page and configure devices */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; - - if (tries[i]) - dev->class = classes[i]; - - if (!ata_dev_enabled(dev)) - continue; - - rc = ata_dev_read_id(dev, &dev->class, 1, dev->id); - if (rc) - goto fail; - - rc = ata_dev_configure(dev, 1); - if (rc) - goto fail; - } - - /* configure transfer mode */ - rc = ata_set_mode(ap, &dev); - if (rc) { - down_xfermask = 1; - goto fail; - } - - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (ata_dev_enabled(&ap->device[i])) - return 0; - - /* no device present, disable port */ - ata_port_disable(ap); - ap->ops->port_disable(ap); - return -ENODEV; - - fail: - switch (rc) { - case -EINVAL: - case -ENODEV: - tries[dev->devno] = 0; - break; - case -EIO: - sata_down_spd_limit(ap); - /* fall through */ - default: - tries[dev->devno]--; - if (down_xfermask && - ata_down_xfermask_limit(dev, tries[dev->devno] == 1)) - tries[dev->devno] = 0; - } - - if (!tries[dev->devno]) { - ata_down_xfermask_limit(dev, 1); - ata_dev_disable(dev); - } - - goto retry; -} - -/** - * ata_port_probe - Mark port as enabled - * @ap: Port for which we indicate enablement - * - * Modify @ap data structure such that the system - * thinks that the entire port is enabled. - * - * LOCKING: host_set lock, or some other form of - * serialization. - */ - -void ata_port_probe(struct ata_port *ap) -{ - ap->flags &= ~ATA_FLAG_DISABLED; -} - -/** - * sata_print_link_status - Print SATA link status - * @ap: SATA port to printk link status about - * - * This function prints link speed and status of a SATA link. - * - * LOCKING: - * None. - */ -static void sata_print_link_status(struct ata_port *ap) -{ - u32 sstatus, scontrol, tmp; - - if (sata_scr_read(ap, SCR_STATUS, &sstatus)) - return; - sata_scr_read(ap, SCR_CONTROL, &scontrol); - - if (ata_port_online(ap)) { - tmp = (sstatus >> 4) & 0xf; - ata_port_printk(ap, KERN_INFO, - "SATA link up %s (SStatus %X SControl %X)\n", - sata_spd_string(tmp), sstatus, scontrol); - } else { - ata_port_printk(ap, KERN_INFO, - "SATA link down (SStatus %X SControl %X)\n", - sstatus, scontrol); - } -} - -/** - * __sata_phy_reset - Wake/reset a low-level SATA PHY - * @ap: SATA port associated with target SATA PHY. - * - * This function issues commands to standard SATA Sxxx - * PHY registers, to wake up the phy (and device), and - * clear any reset condition. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - */ -void __sata_phy_reset(struct ata_port *ap) -{ - u32 sstatus; - unsigned long timeout = jiffies + (HZ * 5); - - if (ap->flags & ATA_FLAG_SATA_RESET) { - /* issue phy wake/reset */ - sata_scr_write_flush(ap, SCR_CONTROL, 0x301); - /* Couldn't find anything in SATA I/II specs, but - * AHCI-1.1 10.4.2 says at least 1 ms. */ - mdelay(1); - } - /* phy wake/clear reset */ - sata_scr_write_flush(ap, SCR_CONTROL, 0x300); - - /* wait for phy to become ready, if necessary */ - do { - msleep(200); - sata_scr_read(ap, SCR_STATUS, &sstatus); - if ((sstatus & 0xf) != 1) - break; - } while (time_before(jiffies, timeout)); - - /* print link status */ - sata_print_link_status(ap); - - /* TODO: phy layer with polling, timeouts, etc. */ - if (!ata_port_offline(ap)) - ata_port_probe(ap); - else - ata_port_disable(ap); - - if (ap->flags & ATA_FLAG_DISABLED) - return; - - if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { - ata_port_disable(ap); - return; - } - - ap->cbl = ATA_CBL_SATA; -} - -/** - * sata_phy_reset - Reset SATA bus. - * @ap: SATA port associated with target SATA PHY. - * - * This function resets the SATA bus, and then probes - * the bus for devices. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - */ -void sata_phy_reset(struct ata_port *ap) -{ - __sata_phy_reset(ap); - if (ap->flags & ATA_FLAG_DISABLED) - return; - ata_bus_reset(ap); -} - -/** - * ata_dev_pair - return other device on cable - * @adev: device - * - * Obtain the other device on the same cable, or if none is - * present NULL is returned - */ - -struct ata_device *ata_dev_pair(struct ata_device *adev) -{ - struct ata_port *ap = adev->ap; - struct ata_device *pair = &ap->device[1 - adev->devno]; - if (!ata_dev_enabled(pair)) - return NULL; - return pair; -} - -/** - * ata_port_disable - Disable port. - * @ap: Port to be disabled. - * - * Modify @ap data structure such that the system - * thinks that the entire port is disabled, and should - * never attempt to probe or communicate with devices - * on this port. - * - * LOCKING: host_set lock, or some other form of - * serialization. - */ - -void ata_port_disable(struct ata_port *ap) -{ - ap->device[0].class = ATA_DEV_NONE; - ap->device[1].class = ATA_DEV_NONE; - ap->flags |= ATA_FLAG_DISABLED; -} - -/** - * sata_down_spd_limit - adjust SATA spd limit downward - * @ap: Port to adjust SATA spd limit for - * - * Adjust SATA spd limit of @ap downward. Note that this - * function only adjusts the limit. The change must be applied - * using sata_set_spd(). - * - * LOCKING: - * Inherited from caller. - * - * RETURNS: - * 0 on success, negative errno on failure - */ -int sata_down_spd_limit(struct ata_port *ap) -{ - u32 sstatus, spd, mask; - int rc, highbit; - - rc = sata_scr_read(ap, SCR_STATUS, &sstatus); - if (rc) - return rc; - - mask = ap->sata_spd_limit; - if (mask <= 1) - return -EINVAL; - highbit = fls(mask) - 1; - mask &= ~(1 << highbit); - - spd = (sstatus >> 4) & 0xf; - if (spd <= 1) - return -EINVAL; - spd--; - mask &= (1 << spd) - 1; - if (!mask) - return -EINVAL; - - ap->sata_spd_limit = mask; - - ata_port_printk(ap, KERN_WARNING, "limiting SATA link speed to %s\n", - sata_spd_string(fls(mask))); - - return 0; -} - -static int __sata_set_spd_needed(struct ata_port *ap, u32 *scontrol) -{ - u32 spd, limit; - - if (ap->sata_spd_limit == UINT_MAX) - limit = 0; - else - limit = fls(ap->sata_spd_limit); - - spd = (*scontrol >> 4) & 0xf; - *scontrol = (*scontrol & ~0xf0) | ((limit & 0xf) << 4); - - return spd != limit; -} - -/** - * sata_set_spd_needed - is SATA spd configuration needed - * @ap: Port in question - * - * Test whether the spd limit in SControl matches - * @ap->sata_spd_limit. This function is used to determine - * whether hardreset is necessary to apply SATA spd - * configuration. - * - * LOCKING: - * Inherited from caller. - * - * RETURNS: - * 1 if SATA spd configuration is needed, 0 otherwise. - */ -int sata_set_spd_needed(struct ata_port *ap) -{ - u32 scontrol; - - if (sata_scr_read(ap, SCR_CONTROL, &scontrol)) - return 0; - - return __sata_set_spd_needed(ap, &scontrol); -} - -/** - * sata_set_spd - set SATA spd according to spd limit - * @ap: Port to set SATA spd for - * - * Set SATA spd of @ap according to sata_spd_limit. - * - * LOCKING: - * Inherited from caller. - * - * RETURNS: - * 0 if spd doesn't need to be changed, 1 if spd has been - * changed. Negative errno if SCR registers are inaccessible. - */ -int sata_set_spd(struct ata_port *ap) -{ - u32 scontrol; - int rc; - - if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) - return rc; - - if (!__sata_set_spd_needed(ap, &scontrol)) - return 0; - - if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) - return rc; - - return 1; -} - -/* - * This mode timing computation functionality is ported over from - * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik - */ -/* - * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). - * These were taken from ATA/ATAPI-6 standard, rev 0a, except - * for PIO 5, which is a nonstandard extension and UDMA6, which - * is currently supported only by Maxtor drives. - */ - -static const struct ata_timing ata_timing[] = { - - { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 }, - { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 }, - { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, - { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, - - { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, - { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, - { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, - -/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */ - - { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, - { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, - { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, - - { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, - { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, - { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, - -/* { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 }, */ - { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, - { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, - - { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 }, - { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 }, - { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 }, - -/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */ - - { 0xFF } -}; - -#define ENOUGH(v,unit) (((v)-1)/(unit)+1) -#define EZ(v,unit) ((v)?ENOUGH(v,unit):0) - -static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT) -{ - q->setup = EZ(t->setup * 1000, T); - q->act8b = EZ(t->act8b * 1000, T); - q->rec8b = EZ(t->rec8b * 1000, T); - q->cyc8b = EZ(t->cyc8b * 1000, T); - q->active = EZ(t->active * 1000, T); - q->recover = EZ(t->recover * 1000, T); - q->cycle = EZ(t->cycle * 1000, T); - q->udma = EZ(t->udma * 1000, UT); -} - -void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b, - struct ata_timing *m, unsigned int what) -{ - if (what & ATA_TIMING_SETUP ) m->setup = max(a->setup, b->setup); - if (what & ATA_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b); - if (what & ATA_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b); - if (what & ATA_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b); - if (what & ATA_TIMING_ACTIVE ) m->active = max(a->active, b->active); - if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover); - if (what & ATA_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle); - if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma); -} - -static const struct ata_timing* ata_timing_find_mode(unsigned short speed) -{ - const struct ata_timing *t; - - for (t = ata_timing; t->mode != speed; t++) - if (t->mode == 0xFF) - return NULL; - return t; -} - -int ata_timing_compute(struct ata_device *adev, unsigned short speed, - struct ata_timing *t, int T, int UT) -{ - const struct ata_timing *s; - struct ata_timing p; - - /* - * Find the mode. - */ - - if (!(s = ata_timing_find_mode(speed))) - return -EINVAL; - - memcpy(t, s, sizeof(*s)); - - /* - * If the drive is an EIDE drive, it can tell us it needs extended - * PIO/MW_DMA cycle timing. - */ - - if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ - memset(&p, 0, sizeof(p)); - if(speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) { - if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO]; - else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY]; - } else if(speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) { - p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN]; - } - ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B); - } - - /* - * Convert the timing to bus clock counts. - */ - - ata_timing_quantize(t, t, T, UT); - - /* - * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, - * S.M.A.R.T * and some other commands. We have to ensure that the - * DMA cycle timing is slower/equal than the fastest PIO timing. - */ - - if (speed > XFER_PIO_4) { - ata_timing_compute(adev, adev->pio_mode, &p, T, UT); - ata_timing_merge(&p, t, t, ATA_TIMING_ALL); - } - - /* - * Lengthen active & recovery time so that cycle time is correct. - */ - - if (t->act8b + t->rec8b < t->cyc8b) { - t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2; - t->rec8b = t->cyc8b - t->act8b; - } - - if (t->active + t->recover < t->cycle) { - t->active += (t->cycle - (t->active + t->recover)) / 2; - t->recover = t->cycle - t->active; - } - - return 0; -} - -/** - * ata_down_xfermask_limit - adjust dev xfer masks downward - * @dev: Device to adjust xfer masks - * @force_pio0: Force PIO0 - * - * Adjust xfer masks of @dev downward. Note that this function - * does not apply the change. Invoking ata_set_mode() afterwards - * will apply the limit. - * - * LOCKING: - * Inherited from caller. - * - * RETURNS: - * 0 on success, negative errno on failure - */ -int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0) -{ - unsigned long xfer_mask; - int highbit; - - xfer_mask = ata_pack_xfermask(dev->pio_mask, dev->mwdma_mask, - dev->udma_mask); - - if (!xfer_mask) - goto fail; - /* don't gear down to MWDMA from UDMA, go directly to PIO */ - if (xfer_mask & ATA_MASK_UDMA) - xfer_mask &= ~ATA_MASK_MWDMA; - - highbit = fls(xfer_mask) - 1; - xfer_mask &= ~(1 << highbit); - if (force_pio0) - xfer_mask &= 1 << ATA_SHIFT_PIO; - if (!xfer_mask) - goto fail; - - ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask, - &dev->udma_mask); - - ata_dev_printk(dev, KERN_WARNING, "limiting speed to %s\n", - ata_mode_string(xfer_mask)); - - return 0; - - fail: - return -EINVAL; -} - -static int ata_dev_set_mode(struct ata_device *dev) -{ - unsigned int err_mask; - int rc; - - dev->flags &= ~ATA_DFLAG_PIO; - if (dev->xfer_shift == ATA_SHIFT_PIO) - dev->flags |= ATA_DFLAG_PIO; - - err_mask = ata_dev_set_xfermode(dev); - if (err_mask) { - ata_dev_printk(dev, KERN_ERR, "failed to set xfermode " - "(err_mask=0x%x)\n", err_mask); - return -EIO; - } - - rc = ata_dev_revalidate(dev, 0); - if (rc) - return rc; - - DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n", - dev->xfer_shift, (int)dev->xfer_mode); - - ata_dev_printk(dev, KERN_INFO, "configured for %s\n", - ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode))); - return 0; -} - -/** - * ata_set_mode - Program timings and issue SET FEATURES - XFER - * @ap: port on which timings will be programmed - * @r_failed_dev: out paramter for failed device - * - * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If - * ata_set_mode() fails, pointer to the failing device is - * returned in @r_failed_dev. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - * RETURNS: - * 0 on success, negative errno otherwise - */ -int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) -{ - struct ata_device *dev; - int i, rc = 0, used_dma = 0, found = 0; - - /* has private set_mode? */ - if (ap->ops->set_mode) { - /* FIXME: make ->set_mode handle no device case and - * return error code and failing device on failure. - */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - if (ata_dev_ready(&ap->device[i])) { - ap->ops->set_mode(ap); - break; - } - } - return 0; - } - - /* step 1: calculate xfer_mask */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - unsigned int pio_mask, dma_mask; - - dev = &ap->device[i]; - - if (!ata_dev_enabled(dev)) - continue; - - ata_dev_xfermask(dev); - - pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0); - dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask); - dev->pio_mode = ata_xfer_mask2mode(pio_mask); - dev->dma_mode = ata_xfer_mask2mode(dma_mask); - - found = 1; - if (dev->dma_mode) - used_dma = 1; - } - if (!found) - goto out; - - /* step 2: always set host PIO timings */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; - if (!ata_dev_enabled(dev)) - continue; - - if (!dev->pio_mode) { - ata_dev_printk(dev, KERN_WARNING, "no PIO support\n"); - rc = -EINVAL; - goto out; - } - - dev->xfer_mode = dev->pio_mode; - dev->xfer_shift = ATA_SHIFT_PIO; - if (ap->ops->set_piomode) - ap->ops->set_piomode(ap, dev); - } - - /* step 3: set host DMA timings */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; - - if (!ata_dev_enabled(dev) || !dev->dma_mode) - continue; - - dev->xfer_mode = dev->dma_mode; - dev->xfer_shift = ata_xfer_mode2shift(dev->dma_mode); - if (ap->ops->set_dmamode) - ap->ops->set_dmamode(ap, dev); - } - - /* step 4: update devices' xfer mode */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; - - /* don't udpate suspended devices' xfer mode */ - if (!ata_dev_ready(dev)) - continue; - - rc = ata_dev_set_mode(dev); - if (rc) - goto out; - } - - /* Record simplex status. If we selected DMA then the other - * host channels are not permitted to do so. - */ - if (used_dma && (ap->host_set->flags & ATA_HOST_SIMPLEX)) - ap->host_set->simplex_claimed = 1; - - /* step5: chip specific finalisation */ - if (ap->ops->post_set_mode) - ap->ops->post_set_mode(ap); - - out: - if (rc) - *r_failed_dev = dev; - return rc; -} - -/** - * ata_tf_to_host - issue ATA taskfile to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues ATA taskfile register set to ATA host controller, - * with proper synchronization with interrupt handler and - * other threads. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static inline void ata_tf_to_host(struct ata_port *ap, - const struct ata_taskfile *tf) -{ - ap->ops->tf_load(ap, tf); - ap->ops->exec_command(ap, tf); -} - -/** - * ata_busy_sleep - sleep until BSY clears, or timeout - * @ap: port containing status register to be polled - * @tmout_pat: impatience timeout - * @tmout: overall timeout - * - * Sleep until ATA Status register bit BSY clears, - * or a timeout occurs. - * - * LOCKING: None. - */ - -unsigned int ata_busy_sleep (struct ata_port *ap, - unsigned long tmout_pat, unsigned long tmout) -{ - unsigned long timer_start, timeout; - u8 status; - - status = ata_busy_wait(ap, ATA_BUSY, 300); - timer_start = jiffies; - timeout = timer_start + tmout_pat; - while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) { - msleep(50); - status = ata_busy_wait(ap, ATA_BUSY, 3); - } - - if (status & ATA_BUSY) - ata_port_printk(ap, KERN_WARNING, - "port is slow to respond, please be patient\n"); - - timeout = timer_start + tmout; - while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) { - msleep(50); - status = ata_chk_status(ap); - } - - if (status & ATA_BUSY) { - ata_port_printk(ap, KERN_ERR, "port failed to respond " - "(%lu secs)\n", tmout / HZ); - return 1; - } - - return 0; -} - -static void ata_bus_post_reset(struct ata_port *ap, unsigned int devmask) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int dev0 = devmask & (1 << 0); - unsigned int dev1 = devmask & (1 << 1); - unsigned long timeout; - - /* if device 0 was found in ata_devchk, wait for its - * BSY bit to clear - */ - if (dev0) - ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); - - /* if device 1 was found in ata_devchk, wait for - * register access, then wait for BSY to clear - */ - timeout = jiffies + ATA_TMOUT_BOOT; - while (dev1) { - u8 nsect, lbal; - - ap->ops->dev_select(ap, 1); - if (ap->flags & ATA_FLAG_MMIO) { - nsect = readb((void __iomem *) ioaddr->nsect_addr); - lbal = readb((void __iomem *) ioaddr->lbal_addr); - } else { - nsect = inb(ioaddr->nsect_addr); - lbal = inb(ioaddr->lbal_addr); - } - if ((nsect == 1) && (lbal == 1)) - break; - if (time_after(jiffies, timeout)) { - dev1 = 0; - break; - } - msleep(50); /* give drive a breather */ - } - if (dev1) - ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); - - /* is all this really necessary? */ - ap->ops->dev_select(ap, 0); - if (dev1) - ap->ops->dev_select(ap, 1); - if (dev0) - ap->ops->dev_select(ap, 0); -} - -static unsigned int ata_bus_softreset(struct ata_port *ap, - unsigned int devmask) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - DPRINTK("ata%u: bus reset via SRST\n", ap->id); - - /* software reset. causes dev0 to be selected */ - if (ap->flags & ATA_FLAG_MMIO) { - writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr); - udelay(20); /* FIXME: flush */ - writeb(ap->ctl | ATA_SRST, (void __iomem *) ioaddr->ctl_addr); - udelay(20); /* FIXME: flush */ - writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr); - } else { - outb(ap->ctl, ioaddr->ctl_addr); - udelay(10); - outb(ap->ctl | ATA_SRST, ioaddr->ctl_addr); - udelay(10); - outb(ap->ctl, ioaddr->ctl_addr); - } - - /* spec mandates ">= 2ms" before checking status. - * We wait 150ms, because that was the magic delay used for - * ATAPI devices in Hale Landis's ATADRVR, for the period of time - * between when the ATA command register is written, and then - * status is checked. Because waiting for "a while" before - * checking status is fine, post SRST, we perform this magic - * delay here as well. - * - * Old drivers/ide uses the 2mS rule and then waits for ready - */ - msleep(150); - - /* Before we perform post reset processing we want to see if - * the bus shows 0xFF because the odd clown forgets the D7 - * pulldown resistor. - */ - if (ata_check_status(ap) == 0xFF) { - ata_port_printk(ap, KERN_ERR, "SRST failed (status 0xFF)\n"); - return AC_ERR_OTHER; - } - - ata_bus_post_reset(ap, devmask); - - return 0; -} - -/** - * ata_bus_reset - reset host port and associated ATA channel - * @ap: port to reset - * - * This is typically the first time we actually start issuing - * commands to the ATA channel. We wait for BSY to clear, then - * issue EXECUTE DEVICE DIAGNOSTIC command, polling for its - * result. Determine what devices, if any, are on the channel - * by looking at the device 0/1 error register. Look at the signature - * stored in each device's taskfile registers, to determine if - * the device is ATA or ATAPI. - * - * LOCKING: - * PCI/etc. bus probe sem. - * Obtains host_set lock. - * - * SIDE EFFECTS: - * Sets ATA_FLAG_DISABLED if bus reset fails. - */ - -void ata_bus_reset(struct ata_port *ap) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; - u8 err; - unsigned int dev0, dev1 = 0, devmask = 0; - - DPRINTK("ENTER, host %u, port %u\n", ap->id, ap->port_no); - - /* determine if device 0/1 are present */ - if (ap->flags & ATA_FLAG_SATA_RESET) - dev0 = 1; - else { - dev0 = ata_devchk(ap, 0); - if (slave_possible) - dev1 = ata_devchk(ap, 1); - } - - if (dev0) - devmask |= (1 << 0); - if (dev1) - devmask |= (1 << 1); - - /* select device 0 again */ - ap->ops->dev_select(ap, 0); - - /* issue bus reset */ - if (ap->flags & ATA_FLAG_SRST) - if (ata_bus_softreset(ap, devmask)) - goto err_out; - - /* - * determine by signature whether we have ATA or ATAPI devices - */ - ap->device[0].class = ata_dev_try_classify(ap, 0, &err); - if ((slave_possible) && (err != 0x81)) - ap->device[1].class = ata_dev_try_classify(ap, 1, &err); - - /* re-enable interrupts */ - if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */ - ata_irq_on(ap); - - /* is double-select really necessary? */ - if (ap->device[1].class != ATA_DEV_NONE) - ap->ops->dev_select(ap, 1); - if (ap->device[0].class != ATA_DEV_NONE) - ap->ops->dev_select(ap, 0); - - /* if no devices were detected, disable this port */ - if ((ap->device[0].class == ATA_DEV_NONE) && - (ap->device[1].class == ATA_DEV_NONE)) - goto err_out; - - if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) { - /* set up device control for ATA_FLAG_SATA_RESET */ - if (ap->flags & ATA_FLAG_MMIO) - writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr); - else - outb(ap->ctl, ioaddr->ctl_addr); - } - - DPRINTK("EXIT\n"); - return; - -err_out: - ata_port_printk(ap, KERN_ERR, "disabling port\n"); - ap->ops->port_disable(ap); - - DPRINTK("EXIT\n"); -} - -/** - * sata_phy_debounce - debounce SATA phy status - * @ap: ATA port to debounce SATA phy status for - * @params: timing parameters { interval, duratinon, timeout } in msec - * - * Make sure SStatus of @ap reaches stable state, determined by - * holding the same value where DET is not 1 for @duration polled - * every @interval, before @timeout. Timeout constraints the - * beginning of the stable state. Because, after hot unplugging, - * DET gets stuck at 1 on some controllers, this functions waits - * until timeout then returns 0 if DET is stable at 1. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno on failure. - */ -int sata_phy_debounce(struct ata_port *ap, const unsigned long *params) -{ - unsigned long interval_msec = params[0]; - unsigned long duration = params[1] * HZ / 1000; - unsigned long timeout = jiffies + params[2] * HZ / 1000; - unsigned long last_jiffies; - u32 last, cur; - int rc; - - if ((rc = sata_scr_read(ap, SCR_STATUS, &cur))) - return rc; - cur &= 0xf; - - last = cur; - last_jiffies = jiffies; - - while (1) { - msleep(interval_msec); - if ((rc = sata_scr_read(ap, SCR_STATUS, &cur))) - return rc; - cur &= 0xf; - - /* DET stable? */ - if (cur == last) { - if (cur == 1 && time_before(jiffies, timeout)) - continue; - if (time_after(jiffies, last_jiffies + duration)) - return 0; - continue; - } - - /* unstable, start over */ - last = cur; - last_jiffies = jiffies; - - /* check timeout */ - if (time_after(jiffies, timeout)) - return -EBUSY; - } -} - -/** - * sata_phy_resume - resume SATA phy - * @ap: ATA port to resume SATA phy for - * @params: timing parameters { interval, duratinon, timeout } in msec - * - * Resume SATA phy of @ap and debounce it. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno on failure. - */ -int sata_phy_resume(struct ata_port *ap, const unsigned long *params) -{ - u32 scontrol; - int rc; - - if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) - return rc; - - scontrol = (scontrol & 0x0f0) | 0x300; - - if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) - return rc; - - /* Some PHYs react badly if SStatus is pounded immediately - * after resuming. Delay 200ms before debouncing. - */ - msleep(200); - - return sata_phy_debounce(ap, params); -} - -static void ata_wait_spinup(struct ata_port *ap) -{ - struct ata_eh_context *ehc = &ap->eh_context; - unsigned long end, secs; - int rc; - - /* first, debounce phy if SATA */ - if (ap->cbl == ATA_CBL_SATA) { - rc = sata_phy_debounce(ap, sata_deb_timing_hotplug); - - /* if debounced successfully and offline, no need to wait */ - if ((rc == 0 || rc == -EOPNOTSUPP) && ata_port_offline(ap)) - return; - } - - /* okay, let's give the drive time to spin up */ - end = ehc->i.hotplug_timestamp + ATA_SPINUP_WAIT * HZ / 1000; - secs = ((end - jiffies) + HZ - 1) / HZ; - - if (time_after(jiffies, end)) - return; - - if (secs > 5) - ata_port_printk(ap, KERN_INFO, "waiting for device to spin up " - "(%lu secs)\n", secs); - - schedule_timeout_uninterruptible(end - jiffies); -} - -/** - * ata_std_prereset - prepare for reset - * @ap: ATA port to be reset - * - * @ap is about to be reset. Initialize it. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int ata_std_prereset(struct ata_port *ap) -{ - struct ata_eh_context *ehc = &ap->eh_context; - const unsigned long *timing = sata_ehc_deb_timing(ehc); - int rc; - - /* handle link resume & hotplug spinup */ - if ((ehc->i.flags & ATA_EHI_RESUME_LINK) && - (ap->flags & ATA_FLAG_HRST_TO_RESUME)) - ehc->i.action |= ATA_EH_HARDRESET; - - if ((ehc->i.flags & ATA_EHI_HOTPLUGGED) && - (ap->flags & ATA_FLAG_SKIP_D2H_BSY)) - ata_wait_spinup(ap); - - /* if we're about to do hardreset, nothing more to do */ - if (ehc->i.action & ATA_EH_HARDRESET) - return 0; - - /* if SATA, resume phy */ - if (ap->cbl == ATA_CBL_SATA) { - rc = sata_phy_resume(ap, timing); - if (rc && rc != -EOPNOTSUPP) { - /* phy resume failed */ - ata_port_printk(ap, KERN_WARNING, "failed to resume " - "link for reset (errno=%d)\n", rc); - return rc; - } - } - - /* Wait for !BSY if the controller can wait for the first D2H - * Reg FIS and we don't know that no device is attached. - */ - if (!(ap->flags & ATA_FLAG_SKIP_D2H_BSY) && !ata_port_offline(ap)) - ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); - - return 0; -} - -/** - * ata_std_softreset - reset host port via ATA SRST - * @ap: port to reset - * @classes: resulting classes of attached devices - * - * Reset host port using ATA SRST. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int ata_std_softreset(struct ata_port *ap, unsigned int *classes) -{ - unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; - unsigned int devmask = 0, err_mask; - u8 err; - - DPRINTK("ENTER\n"); - - if (ata_port_offline(ap)) { - classes[0] = ATA_DEV_NONE; - goto out; - } - - /* determine if device 0/1 are present */ - if (ata_devchk(ap, 0)) - devmask |= (1 << 0); - if (slave_possible && ata_devchk(ap, 1)) - devmask |= (1 << 1); - - /* select device 0 again */ - ap->ops->dev_select(ap, 0); - - /* issue bus reset */ - DPRINTK("about to softreset, devmask=%x\n", devmask); - err_mask = ata_bus_softreset(ap, devmask); - if (err_mask) { - ata_port_printk(ap, KERN_ERR, "SRST failed (err_mask=0x%x)\n", - err_mask); - return -EIO; - } - - /* determine by signature whether we have ATA or ATAPI devices */ - classes[0] = ata_dev_try_classify(ap, 0, &err); - if (slave_possible && err != 0x81) - classes[1] = ata_dev_try_classify(ap, 1, &err); - - out: - DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]); - return 0; -} - -/** - * sata_std_hardreset - reset host port via SATA phy reset - * @ap: port to reset - * @class: resulting class of attached device - * - * SATA phy-reset host port using DET bits of SControl register. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int sata_std_hardreset(struct ata_port *ap, unsigned int *class) -{ - struct ata_eh_context *ehc = &ap->eh_context; - const unsigned long *timing = sata_ehc_deb_timing(ehc); - u32 scontrol; - int rc; - - DPRINTK("ENTER\n"); - - if (sata_set_spd_needed(ap)) { - /* SATA spec says nothing about how to reconfigure - * spd. To be on the safe side, turn off phy during - * reconfiguration. This works for at least ICH7 AHCI - * and Sil3124. - */ - if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) - return rc; - - scontrol = (scontrol & 0x0f0) | 0x302; - - if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) - return rc; - - sata_set_spd(ap); - } - - /* issue phy wake/reset */ - if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) - return rc; - - scontrol = (scontrol & 0x0f0) | 0x301; - - if ((rc = sata_scr_write_flush(ap, SCR_CONTROL, scontrol))) - return rc; - - /* Couldn't find anything in SATA I/II specs, but AHCI-1.1 - * 10.4.2 says at least 1 ms. - */ - msleep(1); - - /* bring phy back */ - sata_phy_resume(ap, timing); - - /* TODO: phy layer with polling, timeouts, etc. */ - if (ata_port_offline(ap)) { - *class = ATA_DEV_NONE; - DPRINTK("EXIT, link offline\n"); - return 0; - } - - if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { - ata_port_printk(ap, KERN_ERR, - "COMRESET failed (device not ready)\n"); - return -EIO; - } - - ap->ops->dev_select(ap, 0); /* probably unnecessary */ - - *class = ata_dev_try_classify(ap, 0, NULL); - - DPRINTK("EXIT, class=%u\n", *class); - return 0; -} - -/** - * ata_std_postreset - standard postreset callback - * @ap: the target ata_port - * @classes: classes of attached devices - * - * This function is invoked after a successful reset. Note that - * the device might have been reset more than once using - * different reset methods before postreset is invoked. - * - * LOCKING: - * Kernel thread context (may sleep) - */ -void ata_std_postreset(struct ata_port *ap, unsigned int *classes) -{ - u32 serror; - - DPRINTK("ENTER\n"); - - /* print link status */ - sata_print_link_status(ap); - - /* clear SError */ - if (sata_scr_read(ap, SCR_ERROR, &serror) == 0) - sata_scr_write(ap, SCR_ERROR, serror); - - /* re-enable interrupts */ - if (!ap->ops->error_handler) { - /* FIXME: hack. create a hook instead */ - if (ap->ioaddr.ctl_addr) - ata_irq_on(ap); - } - - /* is double-select really necessary? */ - if (classes[0] != ATA_DEV_NONE) - ap->ops->dev_select(ap, 1); - if (classes[1] != ATA_DEV_NONE) - ap->ops->dev_select(ap, 0); - - /* bail out if no device is present */ - if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { - DPRINTK("EXIT, no device\n"); - return; - } - - /* set up device control */ - if (ap->ioaddr.ctl_addr) { - if (ap->flags & ATA_FLAG_MMIO) - writeb(ap->ctl, (void __iomem *) ap->ioaddr.ctl_addr); - else - outb(ap->ctl, ap->ioaddr.ctl_addr); - } - - DPRINTK("EXIT\n"); -} - -/** - * ata_dev_same_device - Determine whether new ID matches configured device - * @dev: device to compare against - * @new_class: class of the new device - * @new_id: IDENTIFY page of the new device - * - * Compare @new_class and @new_id against @dev and determine - * whether @dev is the device indicated by @new_class and - * @new_id. - * - * LOCKING: - * None. - * - * RETURNS: - * 1 if @dev matches @new_class and @new_id, 0 otherwise. - */ -static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class, - const u16 *new_id) -{ - const u16 *old_id = dev->id; - unsigned char model[2][41], serial[2][21]; - u64 new_n_sectors; - - if (dev->class != new_class) { - ata_dev_printk(dev, KERN_INFO, "class mismatch %d != %d\n", - dev->class, new_class); - return 0; - } - - ata_id_c_string(old_id, model[0], ATA_ID_PROD_OFS, sizeof(model[0])); - ata_id_c_string(new_id, model[1], ATA_ID_PROD_OFS, sizeof(model[1])); - ata_id_c_string(old_id, serial[0], ATA_ID_SERNO_OFS, sizeof(serial[0])); - ata_id_c_string(new_id, serial[1], ATA_ID_SERNO_OFS, sizeof(serial[1])); - new_n_sectors = ata_id_n_sectors(new_id); - - if (strcmp(model[0], model[1])) { - ata_dev_printk(dev, KERN_INFO, "model number mismatch " - "'%s' != '%s'\n", model[0], model[1]); - return 0; - } - - if (strcmp(serial[0], serial[1])) { - ata_dev_printk(dev, KERN_INFO, "serial number mismatch " - "'%s' != '%s'\n", serial[0], serial[1]); - return 0; - } - - if (dev->class == ATA_DEV_ATA && dev->n_sectors != new_n_sectors) { - ata_dev_printk(dev, KERN_INFO, "n_sectors mismatch " - "%llu != %llu\n", - (unsigned long long)dev->n_sectors, - (unsigned long long)new_n_sectors); - return 0; - } - - return 1; -} - -/** - * ata_dev_revalidate - Revalidate ATA device - * @dev: device to revalidate - * @post_reset: is this revalidation after reset? - * - * Re-read IDENTIFY page and make sure @dev is still attached to - * the port. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, negative errno otherwise - */ -int ata_dev_revalidate(struct ata_device *dev, int post_reset) -{ - unsigned int class = dev->class; - u16 *id = (void *)dev->ap->sector_buf; - int rc; - - if (!ata_dev_enabled(dev)) { - rc = -ENODEV; - goto fail; - } - - /* read ID data */ - rc = ata_dev_read_id(dev, &class, post_reset, id); - if (rc) - goto fail; - - /* is the device still there? */ - if (!ata_dev_same_device(dev, class, id)) { - rc = -ENODEV; - goto fail; - } - - memcpy(dev->id, id, sizeof(id[0]) * ATA_ID_WORDS); - - /* configure device according to the new ID */ - rc = ata_dev_configure(dev, 0); - if (rc == 0) - return 0; - - fail: - ata_dev_printk(dev, KERN_ERR, "revalidation failed (errno=%d)\n", rc); - return rc; -} - -static const char * const ata_dma_blacklist [] = { - "WDC AC11000H", NULL, - "WDC AC22100H", NULL, - "WDC AC32500H", NULL, - "WDC AC33100H", NULL, - "WDC AC31600H", NULL, - "WDC AC32100H", "24.09P07", - "WDC AC23200L", "21.10N21", - "Compaq CRD-8241B", NULL, - "CRD-8400B", NULL, - "CRD-8480B", NULL, - "CRD-8482B", NULL, - "CRD-84", NULL, - "SanDisk SDP3B", NULL, - "SanDisk SDP3B-64", NULL, - "SANYO CD-ROM CRD", NULL, - "HITACHI CDR-8", NULL, - "HITACHI CDR-8335", NULL, - "HITACHI CDR-8435", NULL, - "Toshiba CD-ROM XM-6202B", NULL, - "TOSHIBA CD-ROM XM-1702BC", NULL, - "CD-532E-A", NULL, - "E-IDE CD-ROM CR-840", NULL, - "CD-ROM Drive/F5A", NULL, - "WPI CDD-820", NULL, - "SAMSUNG CD-ROM SC-148C", NULL, - "SAMSUNG CD-ROM SC", NULL, - "SanDisk SDP3B-64", NULL, - "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL, - "_NEC DV5800A", NULL, - "SAMSUNG CD-ROM SN-124", "N001" -}; - -static int ata_strim(char *s, size_t len) -{ - len = strnlen(s, len); - - /* ATAPI specifies that empty space is blank-filled; remove blanks */ - while ((len > 0) && (s[len - 1] == ' ')) { - len--; - s[len] = 0; - } - return len; -} - -static int ata_dma_blacklisted(const struct ata_device *dev) -{ - unsigned char model_num[40]; - unsigned char model_rev[16]; - unsigned int nlen, rlen; - int i; - - /* We don't support polling DMA. - * DMA blacklist those ATAPI devices with CDB-intr (and use PIO) - * if the LLDD handles only interrupts in the HSM_ST_LAST state. - */ - if ((dev->ap->flags & ATA_FLAG_PIO_POLLING) && - (dev->flags & ATA_DFLAG_CDB_INTR)) - return 1; - - ata_id_string(dev->id, model_num, ATA_ID_PROD_OFS, - sizeof(model_num)); - ata_id_string(dev->id, model_rev, ATA_ID_FW_REV_OFS, - sizeof(model_rev)); - nlen = ata_strim(model_num, sizeof(model_num)); - rlen = ata_strim(model_rev, sizeof(model_rev)); - - for (i = 0; i < ARRAY_SIZE(ata_dma_blacklist); i += 2) { - if (!strncmp(ata_dma_blacklist[i], model_num, nlen)) { - if (ata_dma_blacklist[i+1] == NULL) - return 1; - if (!strncmp(ata_dma_blacklist[i], model_rev, rlen)) - return 1; - } - } - return 0; -} - -/** - * ata_dev_xfermask - Compute supported xfermask of the given device - * @dev: Device to compute xfermask for - * - * Compute supported xfermask of @dev and store it in - * dev->*_mask. This function is responsible for applying all - * known limits including host controller limits, device - * blacklist, etc... - * - * LOCKING: - * None. - */ -static void ata_dev_xfermask(struct ata_device *dev) -{ - struct ata_port *ap = dev->ap; - struct ata_host_set *hs = ap->host_set; - unsigned long xfer_mask; - - /* controller modes available */ - xfer_mask = ata_pack_xfermask(ap->pio_mask, - ap->mwdma_mask, ap->udma_mask); - - /* Apply cable rule here. Don't apply it early because when - * we handle hot plug the cable type can itself change. - */ - if (ap->cbl == ATA_CBL_PATA40) - xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA); - - xfer_mask &= ata_pack_xfermask(dev->pio_mask, - dev->mwdma_mask, dev->udma_mask); - xfer_mask &= ata_id_xfermask(dev->id); - - if (ata_dma_blacklisted(dev)) { - xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); - ata_dev_printk(dev, KERN_WARNING, - "device is on DMA blacklist, disabling DMA\n"); - } - - if ((hs->flags & ATA_HOST_SIMPLEX) && hs->simplex_claimed) { - xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); - ata_dev_printk(dev, KERN_WARNING, "simplex DMA is claimed by " - "other device, disabling DMA\n"); - } - - if (ap->ops->mode_filter) - xfer_mask = ap->ops->mode_filter(ap, dev, xfer_mask); - - ata_unpack_xfermask(xfer_mask, &dev->pio_mask, - &dev->mwdma_mask, &dev->udma_mask); -} - -/** - * ata_dev_set_xfermode - Issue SET FEATURES - XFER MODE command - * @dev: Device to which command will be sent - * - * Issue SET FEATURES - XFER MODE command to device @dev - * on port @ap. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - * RETURNS: - * 0 on success, AC_ERR_* mask otherwise. - */ - -static unsigned int ata_dev_set_xfermode(struct ata_device *dev) -{ - struct ata_taskfile tf; - unsigned int err_mask; - - /* set up set-features taskfile */ - DPRINTK("set features - xfer mode\n"); - - ata_tf_init(dev, &tf); - tf.command = ATA_CMD_SET_FEATURES; - tf.feature = SETFEATURES_XFER; - tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - tf.protocol = ATA_PROT_NODATA; - tf.nsect = dev->xfer_mode; - - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); - - DPRINTK("EXIT, err_mask=%x\n", err_mask); - return err_mask; -} - -/** - * ata_dev_init_params - Issue INIT DEV PARAMS command - * @dev: Device to which command will be sent - * @heads: Number of heads (taskfile parameter) - * @sectors: Number of sectors (taskfile parameter) - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, AC_ERR_* mask otherwise. - */ -static unsigned int ata_dev_init_params(struct ata_device *dev, - u16 heads, u16 sectors) -{ - struct ata_taskfile tf; - unsigned int err_mask; - - /* Number of sectors per track 1-255. Number of heads 1-16 */ - if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16) - return AC_ERR_INVALID; - - /* set up init dev params taskfile */ - DPRINTK("init dev params \n"); - - ata_tf_init(dev, &tf); - tf.command = ATA_CMD_INIT_DEV_PARAMS; - tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - tf.protocol = ATA_PROT_NODATA; - tf.nsect = sectors; - tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ - - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); - - DPRINTK("EXIT, err_mask=%x\n", err_mask); - return err_mask; -} - -/** - * ata_sg_clean - Unmap DMA memory associated with command - * @qc: Command containing DMA memory to be released - * - * Unmap all mapped DMA memory associated with this command. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_sg_clean(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct scatterlist *sg = qc->__sg; - int dir = qc->dma_dir; - void *pad_buf = NULL; - - WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP)); - WARN_ON(sg == NULL); - - if (qc->flags & ATA_QCFLAG_SINGLE) - WARN_ON(qc->n_elem > 1); - - VPRINTK("unmapping %u sg elements\n", qc->n_elem); - - /* if we padded the buffer out to 32-bit bound, and data - * xfer direction is from-device, we must copy from the - * pad buffer back into the supplied buffer - */ - if (qc->pad_len && !(qc->tf.flags & ATA_TFLAG_WRITE)) - pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); - - if (qc->flags & ATA_QCFLAG_SG) { - if (qc->n_elem) - dma_unmap_sg(ap->dev, sg, qc->n_elem, dir); - /* restore last sg */ - sg[qc->orig_n_elem - 1].length += qc->pad_len; - if (pad_buf) { - struct scatterlist *psg = &qc->pad_sgent; - void *addr = kmap_atomic(psg->page, KM_IRQ0); - memcpy(addr + psg->offset, pad_buf, qc->pad_len); - kunmap_atomic(addr, KM_IRQ0); - } - } else { - if (qc->n_elem) - dma_unmap_single(ap->dev, - sg_dma_address(&sg[0]), sg_dma_len(&sg[0]), - dir); - /* restore sg */ - sg->length += qc->pad_len; - if (pad_buf) - memcpy(qc->buf_virt + sg->length - qc->pad_len, - pad_buf, qc->pad_len); - } - - qc->flags &= ~ATA_QCFLAG_DMAMAP; - qc->__sg = NULL; -} - -/** - * ata_fill_sg - Fill PCI IDE PRD table - * @qc: Metadata associated with taskfile to be transferred - * - * Fill PCI IDE PRD (scatter-gather) table with segments - * associated with the current disk command. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - */ -static void ata_fill_sg(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct scatterlist *sg; - unsigned int idx; - - WARN_ON(qc->__sg == NULL); - WARN_ON(qc->n_elem == 0 && qc->pad_len == 0); - - idx = 0; - ata_for_each_sg(sg, qc) { - u32 addr, offset; - u32 sg_len, len; - - /* determine if physical DMA addr spans 64K boundary. - * Note h/w doesn't support 64-bit, so we unconditionally - * truncate dma_addr_t to u32. - */ - addr = (u32) sg_dma_address(sg); - sg_len = sg_dma_len(sg); - - while (sg_len) { - offset = addr & 0xffff; - len = sg_len; - if ((offset + sg_len) > 0x10000) - len = 0x10000 - offset; - - ap->prd[idx].addr = cpu_to_le32(addr); - ap->prd[idx].flags_len = cpu_to_le32(len & 0xffff); - VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len); - - idx++; - sg_len -= len; - addr += len; - } - } - - if (idx) - ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); -} -/** - * ata_check_atapi_dma - Check whether ATAPI DMA can be supported - * @qc: Metadata associated with taskfile to check - * - * Allow low-level driver to filter ATA PACKET commands, returning - * a status indicating whether or not it is OK to use DMA for the - * supplied PACKET command. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: 0 when ATAPI DMA can be used - * nonzero otherwise - */ -int ata_check_atapi_dma(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - int rc = 0; /* Assume ATAPI DMA is OK by default */ - - if (ap->ops->check_atapi_dma) - rc = ap->ops->check_atapi_dma(qc); - - return rc; -} -/** - * ata_qc_prep - Prepare taskfile for submission - * @qc: Metadata associated with taskfile to be prepared - * - * Prepare ATA taskfile for submission. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_qc_prep(struct ata_queued_cmd *qc) -{ - if (!(qc->flags & ATA_QCFLAG_DMAMAP)) - return; - - ata_fill_sg(qc); -} - -void ata_noop_qc_prep(struct ata_queued_cmd *qc) { } - -/** - * ata_sg_init_one - Associate command with memory buffer - * @qc: Command to be associated - * @buf: Memory buffer - * @buflen: Length of memory buffer, in bytes. - * - * Initialize the data-related elements of queued_cmd @qc - * to point to a single memory buffer, @buf of byte length @buflen. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) -{ - struct scatterlist *sg; - - qc->flags |= ATA_QCFLAG_SINGLE; - - memset(&qc->sgent, 0, sizeof(qc->sgent)); - qc->__sg = &qc->sgent; - qc->n_elem = 1; - qc->orig_n_elem = 1; - qc->buf_virt = buf; - qc->nbytes = buflen; - - sg = qc->__sg; - sg_init_one(sg, buf, buflen); -} - -/** - * ata_sg_init - Associate command with scatter-gather table. - * @qc: Command to be associated - * @sg: Scatter-gather table. - * @n_elem: Number of elements in s/g table. - * - * Initialize the data-related elements of queued_cmd @qc - * to point to a scatter-gather table @sg, containing @n_elem - * elements. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, - unsigned int n_elem) -{ - qc->flags |= ATA_QCFLAG_SG; - qc->__sg = sg; - qc->n_elem = n_elem; - qc->orig_n_elem = n_elem; -} - -/** - * ata_sg_setup_one - DMA-map the memory buffer associated with a command. - * @qc: Command with memory buffer to be mapped. - * - * DMA-map the memory buffer associated with queued_cmd @qc. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Zero on success, negative on error. - */ - -static int ata_sg_setup_one(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - int dir = qc->dma_dir; - struct scatterlist *sg = qc->__sg; - dma_addr_t dma_address; - int trim_sg = 0; - - /* we must lengthen transfers to end on a 32-bit boundary */ - qc->pad_len = sg->length & 3; - if (qc->pad_len) { - void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); - struct scatterlist *psg = &qc->pad_sgent; - - WARN_ON(qc->dev->class != ATA_DEV_ATAPI); - - memset(pad_buf, 0, ATA_DMA_PAD_SZ); - - if (qc->tf.flags & ATA_TFLAG_WRITE) - memcpy(pad_buf, qc->buf_virt + sg->length - qc->pad_len, - qc->pad_len); - - sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ); - sg_dma_len(psg) = ATA_DMA_PAD_SZ; - /* trim sg */ - sg->length -= qc->pad_len; - if (sg->length == 0) - trim_sg = 1; - - DPRINTK("padding done, sg->length=%u pad_len=%u\n", - sg->length, qc->pad_len); - } - - if (trim_sg) { - qc->n_elem--; - goto skip_map; - } - - dma_address = dma_map_single(ap->dev, qc->buf_virt, - sg->length, dir); - if (dma_mapping_error(dma_address)) { - /* restore sg */ - sg->length += qc->pad_len; - return -1; - } - - sg_dma_address(sg) = dma_address; - sg_dma_len(sg) = sg->length; - -skip_map: - DPRINTK("mapped buffer of %d bytes for %s\n", sg_dma_len(sg), - qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); - - return 0; -} - -/** - * ata_sg_setup - DMA-map the scatter-gather table associated with a command. - * @qc: Command with scatter-gather table to be mapped. - * - * DMA-map the scatter-gather table associated with queued_cmd @qc. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Zero on success, negative on error. - * - */ - -static int ata_sg_setup(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct scatterlist *sg = qc->__sg; - struct scatterlist *lsg = &sg[qc->n_elem - 1]; - int n_elem, pre_n_elem, dir, trim_sg = 0; - - VPRINTK("ENTER, ata%u\n", ap->id); - WARN_ON(!(qc->flags & ATA_QCFLAG_SG)); - - /* we must lengthen transfers to end on a 32-bit boundary */ - qc->pad_len = lsg->length & 3; - if (qc->pad_len) { - void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); - struct scatterlist *psg = &qc->pad_sgent; - unsigned int offset; - - WARN_ON(qc->dev->class != ATA_DEV_ATAPI); - - memset(pad_buf, 0, ATA_DMA_PAD_SZ); - - /* - * psg->page/offset are used to copy to-be-written - * data in this function or read data in ata_sg_clean. - */ - offset = lsg->offset + lsg->length - qc->pad_len; - psg->page = nth_page(lsg->page, offset >> PAGE_SHIFT); - psg->offset = offset_in_page(offset); - - if (qc->tf.flags & ATA_TFLAG_WRITE) { - void *addr = kmap_atomic(psg->page, KM_IRQ0); - memcpy(pad_buf, addr + psg->offset, qc->pad_len); - kunmap_atomic(addr, KM_IRQ0); - } - - sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ); - sg_dma_len(psg) = ATA_DMA_PAD_SZ; - /* trim last sg */ - lsg->length -= qc->pad_len; - if (lsg->length == 0) - trim_sg = 1; - - DPRINTK("padding done, sg[%d].length=%u pad_len=%u\n", - qc->n_elem - 1, lsg->length, qc->pad_len); - } - - pre_n_elem = qc->n_elem; - if (trim_sg && pre_n_elem) - pre_n_elem--; - - if (!pre_n_elem) { - n_elem = 0; - goto skip_map; - } - - dir = qc->dma_dir; - n_elem = dma_map_sg(ap->dev, sg, pre_n_elem, dir); - if (n_elem < 1) { - /* restore last sg */ - lsg->length += qc->pad_len; - return -1; - } - - DPRINTK("%d sg elements mapped\n", n_elem); - -skip_map: - qc->n_elem = n_elem; - - return 0; -} - -/** - * swap_buf_le16 - swap halves of 16-bit words in place - * @buf: Buffer to swap - * @buf_words: Number of 16-bit words in buffer. - * - * Swap halves of 16-bit words if needed to convert from - * little-endian byte order to native cpu byte order, or - * vice-versa. - * - * LOCKING: - * Inherited from caller. - */ -void swap_buf_le16(u16 *buf, unsigned int buf_words) -{ -#ifdef __BIG_ENDIAN - unsigned int i; - - for (i = 0; i < buf_words; i++) - buf[i] = le16_to_cpu(buf[i]); -#endif /* __BIG_ENDIAN */ -} - -/** - * ata_mmio_data_xfer - Transfer data by MMIO - * @adev: device for this I/O - * @buf: data buffer - * @buflen: buffer length - * @write_data: read/write - * - * Transfer data from/to the device data register by MMIO. - * - * LOCKING: - * Inherited from caller. - */ - -void ata_mmio_data_xfer(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data) -{ - struct ata_port *ap = adev->ap; - unsigned int i; - unsigned int words = buflen >> 1; - u16 *buf16 = (u16 *) buf; - void __iomem *mmio = (void __iomem *)ap->ioaddr.data_addr; - - /* Transfer multiple of 2 bytes */ - if (write_data) { - for (i = 0; i < words; i++) - writew(le16_to_cpu(buf16[i]), mmio); - } else { - for (i = 0; i < words; i++) - buf16[i] = cpu_to_le16(readw(mmio)); - } - - /* Transfer trailing 1 byte, if any. */ - if (unlikely(buflen & 0x01)) { - u16 align_buf[1] = { 0 }; - unsigned char *trailing_buf = buf + buflen - 1; - - if (write_data) { - memcpy(align_buf, trailing_buf, 1); - writew(le16_to_cpu(align_buf[0]), mmio); - } else { - align_buf[0] = cpu_to_le16(readw(mmio)); - memcpy(trailing_buf, align_buf, 1); - } - } -} - -/** - * ata_pio_data_xfer - Transfer data by PIO - * @adev: device to target - * @buf: data buffer - * @buflen: buffer length - * @write_data: read/write - * - * Transfer data from/to the device data register by PIO. - * - * LOCKING: - * Inherited from caller. - */ - -void ata_pio_data_xfer(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data) -{ - struct ata_port *ap = adev->ap; - unsigned int words = buflen >> 1; - - /* Transfer multiple of 2 bytes */ - if (write_data) - outsw(ap->ioaddr.data_addr, buf, words); - else - insw(ap->ioaddr.data_addr, buf, words); - - /* Transfer trailing 1 byte, if any. */ - if (unlikely(buflen & 0x01)) { - u16 align_buf[1] = { 0 }; - unsigned char *trailing_buf = buf + buflen - 1; - - if (write_data) { - memcpy(align_buf, trailing_buf, 1); - outw(le16_to_cpu(align_buf[0]), ap->ioaddr.data_addr); - } else { - align_buf[0] = cpu_to_le16(inw(ap->ioaddr.data_addr)); - memcpy(trailing_buf, align_buf, 1); - } - } -} - -/** - * ata_pio_data_xfer_noirq - Transfer data by PIO - * @adev: device to target - * @buf: data buffer - * @buflen: buffer length - * @write_data: read/write - * - * Transfer data from/to the device data register by PIO. Do the - * transfer with interrupts disabled. - * - * LOCKING: - * Inherited from caller. - */ - -void ata_pio_data_xfer_noirq(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data) -{ - unsigned long flags; - local_irq_save(flags); - ata_pio_data_xfer(adev, buf, buflen, write_data); - local_irq_restore(flags); -} - - -/** - * ata_pio_sector - Transfer ATA_SECT_SIZE (512 bytes) of data. - * @qc: Command on going - * - * Transfer ATA_SECT_SIZE of data from/to the ATA device. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_pio_sector(struct ata_queued_cmd *qc) -{ - int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); - struct scatterlist *sg = qc->__sg; - struct ata_port *ap = qc->ap; - struct page *page; - unsigned int offset; - unsigned char *buf; - - if (qc->cursect == (qc->nsect - 1)) - ap->hsm_task_state = HSM_ST_LAST; - - page = sg[qc->cursg].page; - offset = sg[qc->cursg].offset + qc->cursg_ofs * ATA_SECT_SIZE; - - /* get the current page and offset */ - page = nth_page(page, (offset >> PAGE_SHIFT)); - offset %= PAGE_SIZE; - - DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); - - if (PageHighMem(page)) { - unsigned long flags; - - /* FIXME: use a bounce buffer */ - local_irq_save(flags); - buf = kmap_atomic(page, KM_IRQ0); - - /* do the actual data transfer */ - ap->ops->data_xfer(qc->dev, buf + offset, ATA_SECT_SIZE, do_write); - - kunmap_atomic(buf, KM_IRQ0); - local_irq_restore(flags); - } else { - buf = page_address(page); - ap->ops->data_xfer(qc->dev, buf + offset, ATA_SECT_SIZE, do_write); - } - - qc->cursect++; - qc->cursg_ofs++; - - if ((qc->cursg_ofs * ATA_SECT_SIZE) == (&sg[qc->cursg])->length) { - qc->cursg++; - qc->cursg_ofs = 0; - } -} - -/** - * ata_pio_sectors - Transfer one or many 512-byte sectors. - * @qc: Command on going - * - * Transfer one or many ATA_SECT_SIZE of data from/to the - * ATA device for the DRQ request. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_pio_sectors(struct ata_queued_cmd *qc) -{ - if (is_multi_taskfile(&qc->tf)) { - /* READ/WRITE MULTIPLE */ - unsigned int nsect; - - WARN_ON(qc->dev->multi_count == 0); - - nsect = min(qc->nsect - qc->cursect, qc->dev->multi_count); - while (nsect--) - ata_pio_sector(qc); - } else - ata_pio_sector(qc); -} - -/** - * atapi_send_cdb - Write CDB bytes to hardware - * @ap: Port to which ATAPI device is attached. - * @qc: Taskfile currently active - * - * When device has indicated its readiness to accept - * a CDB, this function is called. Send the CDB. - * - * LOCKING: - * caller. - */ - -static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) -{ - /* send SCSI cdb */ - DPRINTK("send cdb\n"); - WARN_ON(qc->dev->cdb_len < 12); - - ap->ops->data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1); - ata_altstatus(ap); /* flush */ - - switch (qc->tf.protocol) { - case ATA_PROT_ATAPI: - ap->hsm_task_state = HSM_ST; - break; - case ATA_PROT_ATAPI_NODATA: - ap->hsm_task_state = HSM_ST_LAST; - break; - case ATA_PROT_ATAPI_DMA: - ap->hsm_task_state = HSM_ST_LAST; - /* initiate bmdma */ - ap->ops->bmdma_start(qc); - break; - } -} - -/** - * __atapi_pio_bytes - Transfer data from/to the ATAPI device. - * @qc: Command on going - * @bytes: number of bytes - * - * Transfer Transfer data from/to the ATAPI device. - * - * LOCKING: - * Inherited from caller. - * - */ - -static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) -{ - int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); - struct scatterlist *sg = qc->__sg; - struct ata_port *ap = qc->ap; - struct page *page; - unsigned char *buf; - unsigned int offset, count; - - if (qc->curbytes + bytes >= qc->nbytes) - ap->hsm_task_state = HSM_ST_LAST; - -next_sg: - if (unlikely(qc->cursg >= qc->n_elem)) { - /* - * The end of qc->sg is reached and the device expects - * more data to transfer. In order not to overrun qc->sg - * and fulfill length specified in the byte count register, - * - for read case, discard trailing data from the device - * - for write case, padding zero data to the device - */ - u16 pad_buf[1] = { 0 }; - unsigned int words = bytes >> 1; - unsigned int i; - - if (words) /* warning if bytes > 1 */ - ata_dev_printk(qc->dev, KERN_WARNING, - "%u bytes trailing data\n", bytes); - - for (i = 0; i < words; i++) - ap->ops->data_xfer(qc->dev, (unsigned char*)pad_buf, 2, do_write); - - ap->hsm_task_state = HSM_ST_LAST; - return; - } - - sg = &qc->__sg[qc->cursg]; - - page = sg->page; - offset = sg->offset + qc->cursg_ofs; - - /* get the current page and offset */ - page = nth_page(page, (offset >> PAGE_SHIFT)); - offset %= PAGE_SIZE; - - /* don't overrun current sg */ - count = min(sg->length - qc->cursg_ofs, bytes); - - /* don't cross page boundaries */ - count = min(count, (unsigned int)PAGE_SIZE - offset); - - DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); - - if (PageHighMem(page)) { - unsigned long flags; - - /* FIXME: use bounce buffer */ - local_irq_save(flags); - buf = kmap_atomic(page, KM_IRQ0); - - /* do the actual data transfer */ - ap->ops->data_xfer(qc->dev, buf + offset, count, do_write); - - kunmap_atomic(buf, KM_IRQ0); - local_irq_restore(flags); - } else { - buf = page_address(page); - ap->ops->data_xfer(qc->dev, buf + offset, count, do_write); - } - - bytes -= count; - qc->curbytes += count; - qc->cursg_ofs += count; - - if (qc->cursg_ofs == sg->length) { - qc->cursg++; - qc->cursg_ofs = 0; - } - - if (bytes) - goto next_sg; -} - -/** - * atapi_pio_bytes - Transfer data from/to the ATAPI device. - * @qc: Command on going - * - * Transfer Transfer data from/to the ATAPI device. - * - * LOCKING: - * Inherited from caller. - */ - -static void atapi_pio_bytes(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct ata_device *dev = qc->dev; - unsigned int ireason, bc_lo, bc_hi, bytes; - int i_write, do_write = (qc->tf.flags & ATA_TFLAG_WRITE) ? 1 : 0; - - /* Abuse qc->result_tf for temp storage of intermediate TF - * here to save some kernel stack usage. - * For normal completion, qc->result_tf is not relevant. For - * error, qc->result_tf is later overwritten by ata_qc_complete(). - * So, the correctness of qc->result_tf is not affected. - */ - ap->ops->tf_read(ap, &qc->result_tf); - ireason = qc->result_tf.nsect; - bc_lo = qc->result_tf.lbam; - bc_hi = qc->result_tf.lbah; - bytes = (bc_hi << 8) | bc_lo; - - /* shall be cleared to zero, indicating xfer of data */ - if (ireason & (1 << 0)) - goto err_out; - - /* make sure transfer direction matches expected */ - i_write = ((ireason & (1 << 1)) == 0) ? 1 : 0; - if (do_write != i_write) - goto err_out; - - VPRINTK("ata%u: xfering %d bytes\n", ap->id, bytes); - - __atapi_pio_bytes(qc, bytes); - - return; - -err_out: - ata_dev_printk(dev, KERN_INFO, "ATAPI check failed\n"); - qc->err_mask |= AC_ERR_HSM; - ap->hsm_task_state = HSM_ST_ERR; -} - -/** - * ata_hsm_ok_in_wq - Check if the qc can be handled in the workqueue. - * @ap: the target ata_port - * @qc: qc on going - * - * RETURNS: - * 1 if ok in workqueue, 0 otherwise. - */ - -static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *qc) -{ - if (qc->tf.flags & ATA_TFLAG_POLLING) - return 1; - - if (ap->hsm_task_state == HSM_ST_FIRST) { - if (qc->tf.protocol == ATA_PROT_PIO && - (qc->tf.flags & ATA_TFLAG_WRITE)) - return 1; - - if (is_atapi_taskfile(&qc->tf) && - !(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - return 1; - } - - return 0; -} - -/** - * ata_hsm_qc_complete - finish a qc running on standard HSM - * @qc: Command to complete - * @in_wq: 1 if called from workqueue, 0 otherwise - * - * Finish @qc which is running on standard HSM. - * - * LOCKING: - * If @in_wq is zero, spin_lock_irqsave(host_set lock). - * Otherwise, none on entry and grabs host lock. - */ -static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) -{ - struct ata_port *ap = qc->ap; - unsigned long flags; - - if (ap->ops->error_handler) { - if (in_wq) { - spin_lock_irqsave(ap->lock, flags); - - /* EH might have kicked in while host_set lock - * is released. - */ - qc = ata_qc_from_tag(ap, qc->tag); - if (qc) { - if (likely(!(qc->err_mask & AC_ERR_HSM))) { - ata_irq_on(ap); - ata_qc_complete(qc); - } else - ata_port_freeze(ap); - } - - spin_unlock_irqrestore(ap->lock, flags); - } else { - if (likely(!(qc->err_mask & AC_ERR_HSM))) - ata_qc_complete(qc); - else - ata_port_freeze(ap); - } - } else { - if (in_wq) { - spin_lock_irqsave(ap->lock, flags); - ata_irq_on(ap); - ata_qc_complete(qc); - spin_unlock_irqrestore(ap->lock, flags); - } else - ata_qc_complete(qc); - } - - ata_altstatus(ap); /* flush */ -} - -/** - * ata_hsm_move - move the HSM to the next state. - * @ap: the target ata_port - * @qc: qc on going - * @status: current device status - * @in_wq: 1 if called from workqueue, 0 otherwise - * - * RETURNS: - * 1 when poll next status needed, 0 otherwise. - */ -int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, - u8 status, int in_wq) -{ - unsigned long flags = 0; - int poll_next; - - WARN_ON((qc->flags & ATA_QCFLAG_ACTIVE) == 0); - - /* Make sure ata_qc_issue_prot() does not throw things - * like DMA polling into the workqueue. Notice that - * in_wq is not equivalent to (qc->tf.flags & ATA_TFLAG_POLLING). - */ - WARN_ON(in_wq != ata_hsm_ok_in_wq(ap, qc)); - -fsm_start: - DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n", - ap->id, qc->tf.protocol, ap->hsm_task_state, status); - - switch (ap->hsm_task_state) { - case HSM_ST_FIRST: - /* Send first data block or PACKET CDB */ - - /* If polling, we will stay in the work queue after - * sending the data. Otherwise, interrupt handler - * takes over after sending the data. - */ - poll_next = (qc->tf.flags & ATA_TFLAG_POLLING); - - /* check device status */ - if (unlikely((status & ATA_DRQ) == 0)) { - /* handle BSY=0, DRQ=0 as error */ - if (likely(status & (ATA_ERR | ATA_DF))) - /* device stops HSM for abort/error */ - qc->err_mask |= AC_ERR_DEV; - else - /* HSM violation. Let EH handle this */ - qc->err_mask |= AC_ERR_HSM; - - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - /* Device should not ask for data transfer (DRQ=1) - * when it finds something wrong. - * We ignore DRQ here and stop the HSM by - * changing hsm_task_state to HSM_ST_ERR and - * let the EH abort the command or reset the device. - */ - if (unlikely(status & (ATA_ERR | ATA_DF))) { - printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n", - ap->id, status); - qc->err_mask |= AC_ERR_HSM; - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - /* Send the CDB (atapi) or the first data block (ata pio out). - * During the state transition, interrupt handler shouldn't - * be invoked before the data transfer is complete and - * hsm_task_state is changed. Hence, the following locking. - */ - if (in_wq) - spin_lock_irqsave(ap->lock, flags); - - if (qc->tf.protocol == ATA_PROT_PIO) { - /* PIO data out protocol. - * send first data block. - */ - - /* ata_pio_sectors() might change the state - * to HSM_ST_LAST. so, the state is changed here - * before ata_pio_sectors(). - */ - ap->hsm_task_state = HSM_ST; - ata_pio_sectors(qc); - ata_altstatus(ap); /* flush */ - } else - /* send CDB */ - atapi_send_cdb(ap, qc); - - if (in_wq) - spin_unlock_irqrestore(ap->lock, flags); - - /* if polling, ata_pio_task() handles the rest. - * otherwise, interrupt handler takes over from here. - */ - break; - - case HSM_ST: - /* complete command or read/write the data register */ - if (qc->tf.protocol == ATA_PROT_ATAPI) { - /* ATAPI PIO protocol */ - if ((status & ATA_DRQ) == 0) { - /* No more data to transfer or device error. - * Device error will be tagged in HSM_ST_LAST. - */ - ap->hsm_task_state = HSM_ST_LAST; - goto fsm_start; - } - - /* Device should not ask for data transfer (DRQ=1) - * when it finds something wrong. - * We ignore DRQ here and stop the HSM by - * changing hsm_task_state to HSM_ST_ERR and - * let the EH abort the command or reset the device. - */ - if (unlikely(status & (ATA_ERR | ATA_DF))) { - printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n", - ap->id, status); - qc->err_mask |= AC_ERR_HSM; - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - atapi_pio_bytes(qc); - - if (unlikely(ap->hsm_task_state == HSM_ST_ERR)) - /* bad ireason reported by device */ - goto fsm_start; - - } else { - /* ATA PIO protocol */ - if (unlikely((status & ATA_DRQ) == 0)) { - /* handle BSY=0, DRQ=0 as error */ - if (likely(status & (ATA_ERR | ATA_DF))) - /* device stops HSM for abort/error */ - qc->err_mask |= AC_ERR_DEV; - else - /* HSM violation. Let EH handle this */ - qc->err_mask |= AC_ERR_HSM; - - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - /* For PIO reads, some devices may ask for - * data transfer (DRQ=1) alone with ERR=1. - * We respect DRQ here and transfer one - * block of junk data before changing the - * hsm_task_state to HSM_ST_ERR. - * - * For PIO writes, ERR=1 DRQ=1 doesn't make - * sense since the data block has been - * transferred to the device. - */ - if (unlikely(status & (ATA_ERR | ATA_DF))) { - /* data might be corrputed */ - qc->err_mask |= AC_ERR_DEV; - - if (!(qc->tf.flags & ATA_TFLAG_WRITE)) { - ata_pio_sectors(qc); - ata_altstatus(ap); - status = ata_wait_idle(ap); - } - - if (status & (ATA_BUSY | ATA_DRQ)) - qc->err_mask |= AC_ERR_HSM; - - /* ata_pio_sectors() might change the - * state to HSM_ST_LAST. so, the state - * is changed after ata_pio_sectors(). - */ - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - ata_pio_sectors(qc); - - if (ap->hsm_task_state == HSM_ST_LAST && - (!(qc->tf.flags & ATA_TFLAG_WRITE))) { - /* all data read */ - ata_altstatus(ap); - status = ata_wait_idle(ap); - goto fsm_start; - } - } - - ata_altstatus(ap); /* flush */ - poll_next = 1; - break; - - case HSM_ST_LAST: - if (unlikely(!ata_ok(status))) { - qc->err_mask |= __ac_err_mask(status); - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - /* no more data to transfer */ - DPRINTK("ata%u: dev %u command complete, drv_stat 0x%x\n", - ap->id, qc->dev->devno, status); - - WARN_ON(qc->err_mask); - - ap->hsm_task_state = HSM_ST_IDLE; - - /* complete taskfile transaction */ - ata_hsm_qc_complete(qc, in_wq); - - poll_next = 0; - break; - - case HSM_ST_ERR: - /* make sure qc->err_mask is available to - * know what's wrong and recover - */ - WARN_ON(qc->err_mask == 0); - - ap->hsm_task_state = HSM_ST_IDLE; - - /* complete taskfile transaction */ - ata_hsm_qc_complete(qc, in_wq); - - poll_next = 0; - break; - default: - poll_next = 0; - BUG(); - } - - return poll_next; -} - -static void ata_pio_task(void *_data) -{ - struct ata_queued_cmd *qc = _data; - struct ata_port *ap = qc->ap; - u8 status; - int poll_next; - -fsm_start: - WARN_ON(ap->hsm_task_state == HSM_ST_IDLE); - - /* - * This is purely heuristic. This is a fast path. - * Sometimes when we enter, BSY will be cleared in - * a chk-status or two. If not, the drive is probably seeking - * or something. Snooze for a couple msecs, then - * chk-status again. If still busy, queue delayed work. - */ - status = ata_busy_wait(ap, ATA_BUSY, 5); - if (status & ATA_BUSY) { - msleep(2); - status = ata_busy_wait(ap, ATA_BUSY, 10); - if (status & ATA_BUSY) { - ata_port_queue_task(ap, ata_pio_task, qc, ATA_SHORT_PAUSE); - return; - } - } - - /* move the HSM */ - poll_next = ata_hsm_move(ap, qc, status, 1); - - /* another command or interrupt handler - * may be running at this point. - */ - if (poll_next) - goto fsm_start; -} - -/** - * ata_qc_new - Request an available ATA command, for queueing - * @ap: Port associated with device @dev - * @dev: Device from whom we request an available command structure - * - * LOCKING: - * None. - */ - -static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) -{ - struct ata_queued_cmd *qc = NULL; - unsigned int i; - - /* no command while frozen */ - if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) - return NULL; - - /* the last tag is reserved for internal command. */ - for (i = 0; i < ATA_MAX_QUEUE - 1; i++) - if (!test_and_set_bit(i, &ap->qc_allocated)) { - qc = __ata_qc_from_tag(ap, i); - break; - } - - if (qc) - qc->tag = i; - - return qc; -} - -/** - * ata_qc_new_init - Request an available ATA command, and initialize it - * @dev: Device from whom we request an available command structure - * - * LOCKING: - * None. - */ - -struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev) -{ - struct ata_port *ap = dev->ap; - struct ata_queued_cmd *qc; - - qc = ata_qc_new(ap); - if (qc) { - qc->scsicmd = NULL; - qc->ap = ap; - qc->dev = dev; - - ata_qc_reinit(qc); - } - - return qc; -} - -/** - * ata_qc_free - free unused ata_queued_cmd - * @qc: Command to complete - * - * Designed to free unused ata_queued_cmd object - * in case something prevents using it. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_qc_free(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int tag; - - WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ - - qc->flags = 0; - tag = qc->tag; - if (likely(ata_tag_valid(tag))) { - qc->tag = ATA_TAG_POISON; - clear_bit(tag, &ap->qc_allocated); - } -} - -void __ata_qc_complete(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ - WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); - - if (likely(qc->flags & ATA_QCFLAG_DMAMAP)) - ata_sg_clean(qc); - - /* command should be marked inactive atomically with qc completion */ - if (qc->tf.protocol == ATA_PROT_NCQ) - ap->sactive &= ~(1 << qc->tag); - else - ap->active_tag = ATA_TAG_POISON; - - /* atapi: mark qc as inactive to prevent the interrupt handler - * from completing the command twice later, before the error handler - * is called. (when rc != 0 and atapi request sense is needed) - */ - qc->flags &= ~ATA_QCFLAG_ACTIVE; - ap->qc_active &= ~(1 << qc->tag); - - /* call completion callback */ - qc->complete_fn(qc); -} - -/** - * ata_qc_complete - Complete an active ATA command - * @qc: Command to complete - * @err_mask: ATA Status register contents - * - * Indicate to the mid and upper layers that an ATA - * command has completed, with either an ok or not-ok status. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_qc_complete(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - /* XXX: New EH and old EH use different mechanisms to - * synchronize EH with regular execution path. - * - * In new EH, a failed qc is marked with ATA_QCFLAG_FAILED. - * Normal execution path is responsible for not accessing a - * failed qc. libata core enforces the rule by returning NULL - * from ata_qc_from_tag() for failed qcs. - * - * Old EH depends on ata_qc_complete() nullifying completion - * requests if ATA_QCFLAG_EH_SCHEDULED is set. Old EH does - * not synchronize with interrupt handler. Only PIO task is - * taken care of. - */ - if (ap->ops->error_handler) { - WARN_ON(ap->pflags & ATA_PFLAG_FROZEN); - - if (unlikely(qc->err_mask)) - qc->flags |= ATA_QCFLAG_FAILED; - - if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) { - if (!ata_tag_internal(qc->tag)) { - /* always fill result TF for failed qc */ - ap->ops->tf_read(ap, &qc->result_tf); - ata_qc_schedule_eh(qc); - return; - } - } - - /* read result TF if requested */ - if (qc->flags & ATA_QCFLAG_RESULT_TF) - ap->ops->tf_read(ap, &qc->result_tf); - - __ata_qc_complete(qc); - } else { - if (qc->flags & ATA_QCFLAG_EH_SCHEDULED) - return; - - /* read result TF if failed or requested */ - if (qc->err_mask || qc->flags & ATA_QCFLAG_RESULT_TF) - ap->ops->tf_read(ap, &qc->result_tf); - - __ata_qc_complete(qc); - } -} - -/** - * ata_qc_complete_multiple - Complete multiple qcs successfully - * @ap: port in question - * @qc_active: new qc_active mask - * @finish_qc: LLDD callback invoked before completing a qc - * - * Complete in-flight commands. This functions is meant to be - * called from low-level driver's interrupt routine to complete - * requests normally. ap->qc_active and @qc_active is compared - * and commands are completed accordingly. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Number of completed commands on success, -errno otherwise. - */ -int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active, - void (*finish_qc)(struct ata_queued_cmd *)) -{ - int nr_done = 0; - u32 done_mask; - int i; - - done_mask = ap->qc_active ^ qc_active; - - if (unlikely(done_mask & qc_active)) { - ata_port_printk(ap, KERN_ERR, "illegal qc_active transition " - "(%08x->%08x)\n", ap->qc_active, qc_active); - return -EINVAL; - } - - for (i = 0; i < ATA_MAX_QUEUE; i++) { - struct ata_queued_cmd *qc; - - if (!(done_mask & (1 << i))) - continue; - - if ((qc = ata_qc_from_tag(ap, i))) { - if (finish_qc) - finish_qc(qc); - ata_qc_complete(qc); - nr_done++; - } - } - - return nr_done; -} - -static inline int ata_should_dma_map(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - switch (qc->tf.protocol) { - case ATA_PROT_NCQ: - case ATA_PROT_DMA: - case ATA_PROT_ATAPI_DMA: - return 1; - - case ATA_PROT_ATAPI: - case ATA_PROT_PIO: - if (ap->flags & ATA_FLAG_PIO_DMA) - return 1; - - /* fall through */ - - default: - return 0; - } - - /* never reached */ -} - -/** - * ata_qc_issue - issue taskfile to device - * @qc: command to issue to device - * - * Prepare an ATA command to submission to device. - * This includes mapping the data into a DMA-able - * area, filling in the S/G table, and finally - * writing the taskfile to hardware, starting the command. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_qc_issue(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - /* Make sure only one non-NCQ command is outstanding. The - * check is skipped for old EH because it reuses active qc to - * request ATAPI sense. - */ - WARN_ON(ap->ops->error_handler && ata_tag_valid(ap->active_tag)); - - if (qc->tf.protocol == ATA_PROT_NCQ) { - WARN_ON(ap->sactive & (1 << qc->tag)); - ap->sactive |= 1 << qc->tag; - } else { - WARN_ON(ap->sactive); - ap->active_tag = qc->tag; - } - - qc->flags |= ATA_QCFLAG_ACTIVE; - ap->qc_active |= 1 << qc->tag; - - if (ata_should_dma_map(qc)) { - if (qc->flags & ATA_QCFLAG_SG) { - if (ata_sg_setup(qc)) - goto sg_err; - } else if (qc->flags & ATA_QCFLAG_SINGLE) { - if (ata_sg_setup_one(qc)) - goto sg_err; - } - } else { - qc->flags &= ~ATA_QCFLAG_DMAMAP; - } - - ap->ops->qc_prep(qc); - - qc->err_mask |= ap->ops->qc_issue(qc); - if (unlikely(qc->err_mask)) - goto err; - return; - -sg_err: - qc->flags &= ~ATA_QCFLAG_DMAMAP; - qc->err_mask |= AC_ERR_SYSTEM; -err: - ata_qc_complete(qc); -} - -/** - * ata_qc_issue_prot - issue taskfile to device in proto-dependent manner - * @qc: command to issue to device - * - * Using various libata functions and hooks, this function - * starts an ATA command. ATA commands are grouped into - * classes called "protocols", and issuing each type of protocol - * is slightly different. - * - * May be used as the qc_issue() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Zero on success, AC_ERR_* mask on failure - */ - -unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - /* Use polling pio if the LLD doesn't handle - * interrupt driven pio and atapi CDB interrupt. - */ - if (ap->flags & ATA_FLAG_PIO_POLLING) { - switch (qc->tf.protocol) { - case ATA_PROT_PIO: - case ATA_PROT_ATAPI: - case ATA_PROT_ATAPI_NODATA: - qc->tf.flags |= ATA_TFLAG_POLLING; - break; - case ATA_PROT_ATAPI_DMA: - if (qc->dev->flags & ATA_DFLAG_CDB_INTR) - /* see ata_dma_blacklisted() */ - BUG(); - break; - default: - break; - } - } - - /* select the device */ - ata_dev_select(ap, qc->dev->devno, 1, 0); - - /* start the command */ - switch (qc->tf.protocol) { - case ATA_PROT_NODATA: - if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_qc_set_polling(qc); - - ata_tf_to_host(ap, &qc->tf); - ap->hsm_task_state = HSM_ST_LAST; - - if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_port_queue_task(ap, ata_pio_task, qc, 0); - - break; - - case ATA_PROT_DMA: - WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING); - - ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ - ap->ops->bmdma_setup(qc); /* set up bmdma */ - ap->ops->bmdma_start(qc); /* initiate bmdma */ - ap->hsm_task_state = HSM_ST_LAST; - break; - - case ATA_PROT_PIO: - if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_qc_set_polling(qc); - - ata_tf_to_host(ap, &qc->tf); - - if (qc->tf.flags & ATA_TFLAG_WRITE) { - /* PIO data out protocol */ - ap->hsm_task_state = HSM_ST_FIRST; - ata_port_queue_task(ap, ata_pio_task, qc, 0); - - /* always send first data block using - * the ata_pio_task() codepath. - */ - } else { - /* PIO data in protocol */ - ap->hsm_task_state = HSM_ST; - - if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_port_queue_task(ap, ata_pio_task, qc, 0); - - /* if polling, ata_pio_task() handles the rest. - * otherwise, interrupt handler takes over from here. - */ - } - - break; - - case ATA_PROT_ATAPI: - case ATA_PROT_ATAPI_NODATA: - if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_qc_set_polling(qc); - - ata_tf_to_host(ap, &qc->tf); - - ap->hsm_task_state = HSM_ST_FIRST; - - /* send cdb by polling if no cdb interrupt */ - if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) || - (qc->tf.flags & ATA_TFLAG_POLLING)) - ata_port_queue_task(ap, ata_pio_task, qc, 0); - break; - - case ATA_PROT_ATAPI_DMA: - WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING); - - ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ - ap->ops->bmdma_setup(qc); /* set up bmdma */ - ap->hsm_task_state = HSM_ST_FIRST; - - /* send cdb by polling if no cdb interrupt */ - if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - ata_port_queue_task(ap, ata_pio_task, qc, 0); - break; - - default: - WARN_ON(1); - return AC_ERR_SYSTEM; - } - - return 0; -} - -/** - * ata_host_intr - Handle host interrupt for given (port, task) - * @ap: Port on which interrupt arrived (possibly...) - * @qc: Taskfile currently active in engine - * - * Handle host interrupt for given queued command. Currently, - * only DMA interrupts are handled. All other commands are - * handled via polling with interrupts disabled (nIEN bit). - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * One if interrupt was handled, zero if not (shared irq). - */ - -inline unsigned int ata_host_intr (struct ata_port *ap, - struct ata_queued_cmd *qc) -{ - u8 status, host_stat = 0; - - VPRINTK("ata%u: protocol %d task_state %d\n", - ap->id, qc->tf.protocol, ap->hsm_task_state); - - /* Check whether we are expecting interrupt in this state */ - switch (ap->hsm_task_state) { - case HSM_ST_FIRST: - /* Some pre-ATAPI-4 devices assert INTRQ - * at this state when ready to receive CDB. - */ - - /* Check the ATA_DFLAG_CDB_INTR flag is enough here. - * The flag was turned on only for atapi devices. - * No need to check is_atapi_taskfile(&qc->tf) again. - */ - if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - goto idle_irq; - break; - case HSM_ST_LAST: - if (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_DMA) { - /* check status of DMA engine */ - host_stat = ap->ops->bmdma_status(ap); - VPRINTK("ata%u: host_stat 0x%X\n", ap->id, host_stat); - - /* if it's not our irq... */ - if (!(host_stat & ATA_DMA_INTR)) - goto idle_irq; - - /* before we do anything else, clear DMA-Start bit */ - ap->ops->bmdma_stop(qc); - - if (unlikely(host_stat & ATA_DMA_ERR)) { - /* error when transfering data to/from memory */ - qc->err_mask |= AC_ERR_HOST_BUS; - ap->hsm_task_state = HSM_ST_ERR; - } - } - break; - case HSM_ST: - break; - default: - goto idle_irq; - } - - /* check altstatus */ - status = ata_altstatus(ap); - if (status & ATA_BUSY) - goto idle_irq; - - /* check main status, clearing INTRQ */ - status = ata_chk_status(ap); - if (unlikely(status & ATA_BUSY)) - goto idle_irq; - - /* ack bmdma irq events */ - ap->ops->irq_clear(ap); - - ata_hsm_move(ap, qc, status, 0); - return 1; /* irq handled */ - -idle_irq: - ap->stats.idle_irq++; - -#ifdef ATA_IRQ_TRAP - if ((ap->stats.idle_irq % 1000) == 0) { - ata_irq_ack(ap, 0); /* debug trap */ - ata_port_printk(ap, KERN_WARNING, "irq trap\n"); - return 1; - } -#endif - return 0; /* irq not handled */ -} - -/** - * ata_interrupt - Default ATA host interrupt handler - * @irq: irq line (unused) - * @dev_instance: pointer to our ata_host_set information structure - * @regs: unused - * - * Default interrupt handler for PCI IDE devices. Calls - * ata_host_intr() for each port that is not disabled. - * - * LOCKING: - * Obtains host_set lock during operation. - * - * RETURNS: - * IRQ_NONE or IRQ_HANDLED. - */ - -irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - unsigned int i; - unsigned int handled = 0; - unsigned long flags; - - /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */ - spin_lock_irqsave(&host_set->lock, flags); - - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap; - - ap = host_set->ports[i]; - if (ap && - !(ap->flags & ATA_FLAG_DISABLED)) { - struct ata_queued_cmd *qc; - - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) && - (qc->flags & ATA_QCFLAG_ACTIVE)) - handled |= ata_host_intr(ap, qc); - } - } - - spin_unlock_irqrestore(&host_set->lock, flags); - - return IRQ_RETVAL(handled); -} - -/** - * sata_scr_valid - test whether SCRs are accessible - * @ap: ATA port to test SCR accessibility for - * - * Test whether SCRs are accessible for @ap. - * - * LOCKING: - * None. - * - * RETURNS: - * 1 if SCRs are accessible, 0 otherwise. - */ -int sata_scr_valid(struct ata_port *ap) -{ - return ap->cbl == ATA_CBL_SATA && ap->ops->scr_read; -} - -/** - * sata_scr_read - read SCR register of the specified port - * @ap: ATA port to read SCR for - * @reg: SCR to read - * @val: Place to store read value - * - * Read SCR register @reg of @ap into *@val. This function is - * guaranteed to succeed if the cable type of the port is SATA - * and the port implements ->scr_read. - * - * LOCKING: - * None. - * - * RETURNS: - * 0 on success, negative errno on failure. - */ -int sata_scr_read(struct ata_port *ap, int reg, u32 *val) -{ - if (sata_scr_valid(ap)) { - *val = ap->ops->scr_read(ap, reg); - return 0; - } - return -EOPNOTSUPP; -} - -/** - * sata_scr_write - write SCR register of the specified port - * @ap: ATA port to write SCR for - * @reg: SCR to write - * @val: value to write - * - * Write @val to SCR register @reg of @ap. This function is - * guaranteed to succeed if the cable type of the port is SATA - * and the port implements ->scr_read. - * - * LOCKING: - * None. - * - * RETURNS: - * 0 on success, negative errno on failure. - */ -int sata_scr_write(struct ata_port *ap, int reg, u32 val) -{ - if (sata_scr_valid(ap)) { - ap->ops->scr_write(ap, reg, val); - return 0; - } - return -EOPNOTSUPP; -} - -/** - * sata_scr_write_flush - write SCR register of the specified port and flush - * @ap: ATA port to write SCR for - * @reg: SCR to write - * @val: value to write - * - * This function is identical to sata_scr_write() except that this - * function performs flush after writing to the register. - * - * LOCKING: - * None. - * - * RETURNS: - * 0 on success, negative errno on failure. - */ -int sata_scr_write_flush(struct ata_port *ap, int reg, u32 val) -{ - if (sata_scr_valid(ap)) { - ap->ops->scr_write(ap, reg, val); - ap->ops->scr_read(ap, reg); - return 0; - } - return -EOPNOTSUPP; -} - -/** - * ata_port_online - test whether the given port is online - * @ap: ATA port to test - * - * Test whether @ap is online. Note that this function returns 0 - * if online status of @ap cannot be obtained, so - * ata_port_online(ap) != !ata_port_offline(ap). - * - * LOCKING: - * None. - * - * RETURNS: - * 1 if the port online status is available and online. - */ -int ata_port_online(struct ata_port *ap) -{ - u32 sstatus; - - if (!sata_scr_read(ap, SCR_STATUS, &sstatus) && (sstatus & 0xf) == 0x3) - return 1; - return 0; -} - -/** - * ata_port_offline - test whether the given port is offline - * @ap: ATA port to test - * - * Test whether @ap is offline. Note that this function returns - * 0 if offline status of @ap cannot be obtained, so - * ata_port_online(ap) != !ata_port_offline(ap). - * - * LOCKING: - * None. - * - * RETURNS: - * 1 if the port offline status is available and offline. - */ -int ata_port_offline(struct ata_port *ap) -{ - u32 sstatus; - - if (!sata_scr_read(ap, SCR_STATUS, &sstatus) && (sstatus & 0xf) != 0x3) - return 1; - return 0; -} - -int ata_flush_cache(struct ata_device *dev) -{ - unsigned int err_mask; - u8 cmd; - - if (!ata_try_flush_cache(dev)) - return 0; - - if (ata_id_has_flush_ext(dev->id)) - cmd = ATA_CMD_FLUSH_EXT; - else - cmd = ATA_CMD_FLUSH; - - err_mask = ata_do_simple_cmd(dev, cmd); - if (err_mask) { - ata_dev_printk(dev, KERN_ERR, "failed to flush cache\n"); - return -EIO; - } - - return 0; -} - -static int ata_host_set_request_pm(struct ata_host_set *host_set, - pm_message_t mesg, unsigned int action, - unsigned int ehi_flags, int wait) -{ - unsigned long flags; - int i, rc; - - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; - - /* Previous resume operation might still be in - * progress. Wait for PM_PENDING to clear. - */ - if (ap->pflags & ATA_PFLAG_PM_PENDING) { - ata_port_wait_eh(ap); - WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); - } - - /* request PM ops to EH */ - spin_lock_irqsave(ap->lock, flags); - - ap->pm_mesg = mesg; - if (wait) { - rc = 0; - ap->pm_result = &rc; - } - - ap->pflags |= ATA_PFLAG_PM_PENDING; - ap->eh_info.action |= action; - ap->eh_info.flags |= ehi_flags; - - ata_port_schedule_eh(ap); - - spin_unlock_irqrestore(ap->lock, flags); - - /* wait and check result */ - if (wait) { - ata_port_wait_eh(ap); - WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); - if (rc) - return rc; - } - } - - return 0; -} - -/** - * ata_host_set_suspend - suspend host_set - * @host_set: host_set to suspend - * @mesg: PM message - * - * Suspend @host_set. Actual operation is performed by EH. This - * function requests EH to perform PM operations and waits for EH - * to finish. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0 on success, -errno on failure. - */ -int ata_host_set_suspend(struct ata_host_set *host_set, pm_message_t mesg) -{ - int i, j, rc; - - rc = ata_host_set_request_pm(host_set, mesg, 0, ATA_EHI_QUIET, 1); - if (rc) - goto fail; - - /* EH is quiescent now. Fail if we have any ready device. - * This happens if hotplug occurs between completion of device - * suspension and here. - */ - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; - - for (j = 0; j < ATA_MAX_DEVICES; j++) { - struct ata_device *dev = &ap->device[j]; - - if (ata_dev_ready(dev)) { - ata_port_printk(ap, KERN_WARNING, - "suspend failed, device %d " - "still active\n", dev->devno); - rc = -EBUSY; - goto fail; - } - } - } - - host_set->dev->power.power_state = mesg; - return 0; - - fail: - ata_host_set_resume(host_set); - return rc; -} - -/** - * ata_host_set_resume - resume host_set - * @host_set: host_set to resume - * - * Resume @host_set. Actual operation is performed by EH. This - * function requests EH to perform PM operations and returns. - * Note that all resume operations are performed parallely. - * - * LOCKING: - * Kernel thread context (may sleep). - */ -void ata_host_set_resume(struct ata_host_set *host_set) -{ - ata_host_set_request_pm(host_set, PMSG_ON, ATA_EH_SOFTRESET, - ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0); - host_set->dev->power.power_state = PMSG_ON; -} - -/** - * ata_port_start - Set port up for dma. - * @ap: Port to initialize - * - * Called just after data structures for each port are - * initialized. Allocates space for PRD table. - * - * May be used as the port_start() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ - -int ata_port_start (struct ata_port *ap) -{ - struct device *dev = ap->dev; - int rc; - - ap->prd = dma_alloc_coherent(dev, ATA_PRD_TBL_SZ, &ap->prd_dma, GFP_KERNEL); - if (!ap->prd) - return -ENOMEM; - - rc = ata_pad_alloc(ap, dev); - if (rc) { - dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma); - return rc; - } - - DPRINTK("prd alloc, virt %p, dma %llx\n", ap->prd, (unsigned long long) ap->prd_dma); - - return 0; -} - - -/** - * ata_port_stop - Undo ata_port_start() - * @ap: Port to shut down - * - * Frees the PRD table. - * - * May be used as the port_stop() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ - -void ata_port_stop (struct ata_port *ap) -{ - struct device *dev = ap->dev; - - dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma); - ata_pad_free(ap, dev); -} - -void ata_host_stop (struct ata_host_set *host_set) -{ - if (host_set->mmio_base) - iounmap(host_set->mmio_base); -} - -/** - * ata_dev_init - Initialize an ata_device structure - * @dev: Device structure to initialize - * - * Initialize @dev in preparation for probing. - * - * LOCKING: - * Inherited from caller. - */ -void ata_dev_init(struct ata_device *dev) -{ - struct ata_port *ap = dev->ap; - unsigned long flags; - - /* SATA spd limit is bound to the first device */ - ap->sata_spd_limit = ap->hw_sata_spd_limit; - - /* High bits of dev->flags are used to record warm plug - * requests which occur asynchronously. Synchronize using - * host_set lock. - */ - spin_lock_irqsave(ap->lock, flags); - dev->flags &= ~ATA_DFLAG_INIT_MASK; - spin_unlock_irqrestore(ap->lock, flags); - - memset((void *)dev + ATA_DEVICE_CLEAR_OFFSET, 0, - sizeof(*dev) - ATA_DEVICE_CLEAR_OFFSET); - dev->pio_mask = UINT_MAX; - dev->mwdma_mask = UINT_MAX; - dev->udma_mask = UINT_MAX; -} - -/** - * ata_port_init - Initialize an ata_port structure - * @ap: Structure to initialize - * @host_set: Collection of hosts to which @ap belongs - * @ent: Probe information provided by low-level driver - * @port_no: Port number associated with this ata_port - * - * Initialize a new ata_port structure. - * - * LOCKING: - * Inherited from caller. - */ -void ata_port_init(struct ata_port *ap, struct ata_host_set *host_set, - const struct ata_probe_ent *ent, unsigned int port_no) -{ - unsigned int i; - - ap->lock = &host_set->lock; - ap->flags = ATA_FLAG_DISABLED; - ap->id = ata_unique_id++; - ap->ctl = ATA_DEVCTL_OBS; - ap->host_set = host_set; - ap->dev = ent->dev; - ap->port_no = port_no; - ap->pio_mask = ent->pio_mask; - ap->mwdma_mask = ent->mwdma_mask; - ap->udma_mask = ent->udma_mask; - ap->flags |= ent->host_flags; - ap->ops = ent->port_ops; - ap->hw_sata_spd_limit = UINT_MAX; - ap->active_tag = ATA_TAG_POISON; - ap->last_ctl = 0xFF; - -#if defined(ATA_VERBOSE_DEBUG) - /* turn on all debugging levels */ - ap->msg_enable = 0x00FF; -#elif defined(ATA_DEBUG) - ap->msg_enable = ATA_MSG_DRV | ATA_MSG_INFO | ATA_MSG_CTL | ATA_MSG_WARN | ATA_MSG_ERR; -#else - ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN; -#endif - - INIT_WORK(&ap->port_task, NULL, NULL); - INIT_WORK(&ap->hotplug_task, ata_scsi_hotplug, ap); - INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan, ap); - INIT_LIST_HEAD(&ap->eh_done_q); - init_waitqueue_head(&ap->eh_wait_q); - - /* set cable type */ - ap->cbl = ATA_CBL_NONE; - if (ap->flags & ATA_FLAG_SATA) - ap->cbl = ATA_CBL_SATA; - - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; - dev->ap = ap; - dev->devno = i; - ata_dev_init(dev); - } - -#ifdef ATA_IRQ_TRAP - ap->stats.unhandled_irq = 1; - ap->stats.idle_irq = 1; -#endif - - memcpy(&ap->ioaddr, &ent->port[port_no], sizeof(struct ata_ioports)); -} - -/** - * ata_port_init_shost - Initialize SCSI host associated with ATA port - * @ap: ATA port to initialize SCSI host for - * @shost: SCSI host associated with @ap - * - * Initialize SCSI host @shost associated with ATA port @ap. - * - * LOCKING: - * Inherited from caller. - */ -static void ata_port_init_shost(struct ata_port *ap, struct Scsi_Host *shost) -{ - ap->host = shost; - - shost->unique_id = ap->id; - shost->max_id = 16; - shost->max_lun = 1; - shost->max_channel = 1; - shost->max_cmd_len = 12; -} - -/** - * ata_port_add - Attach low-level ATA driver to system - * @ent: Information provided by low-level driver - * @host_set: Collections of ports to which we add - * @port_no: Port number associated with this host - * - * Attach low-level ATA driver to system. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - * RETURNS: - * New ata_port on success, for NULL on error. - */ -static struct ata_port * ata_port_add(const struct ata_probe_ent *ent, - struct ata_host_set *host_set, - unsigned int port_no) -{ - struct Scsi_Host *shost; - struct ata_port *ap; - - DPRINTK("ENTER\n"); - - if (!ent->port_ops->error_handler && - !(ent->host_flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST))) { - printk(KERN_ERR "ata%u: no reset mechanism available\n", - port_no); - return NULL; - } - - shost = scsi_host_alloc(ent->sht, sizeof(struct ata_port)); - if (!shost) - return NULL; - - shost->transportt = &ata_scsi_transport_template; - - ap = ata_shost_to_port(shost); - - ata_port_init(ap, host_set, ent, port_no); - ata_port_init_shost(ap, shost); - - return ap; -} - -/** - * ata_sas_host_init - Initialize a host_set struct - * @host_set: host_set to initialize - * @dev: device host_set is attached to - * @flags: host_set flags - * @ops: port_ops - * - * LOCKING: - * PCI/etc. bus probe sem. - * - */ - -void ata_host_set_init(struct ata_host_set *host_set, - struct device *dev, unsigned long flags, - const struct ata_port_operations *ops) -{ - spin_lock_init(&host_set->lock); - host_set->dev = dev; - host_set->flags = flags; - host_set->ops = ops; -} - -/** - * ata_device_add - Register hardware device with ATA and SCSI layers - * @ent: Probe information describing hardware device to be registered - * - * This function processes the information provided in the probe - * information struct @ent, allocates the necessary ATA and SCSI - * host information structures, initializes them, and registers - * everything with requisite kernel subsystems. - * - * This function requests irqs, probes the ATA bus, and probes - * the SCSI bus. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - * RETURNS: - * Number of ports registered. Zero on error (no ports registered). - */ -int ata_device_add(const struct ata_probe_ent *ent) -{ - unsigned int i; - struct device *dev = ent->dev; - struct ata_host_set *host_set; - int rc; - - DPRINTK("ENTER\n"); - /* alloc a container for our list of ATA ports (buses) */ - host_set = kzalloc(sizeof(struct ata_host_set) + - (ent->n_ports * sizeof(void *)), GFP_KERNEL); - if (!host_set) - return 0; - - ata_host_set_init(host_set, dev, ent->host_set_flags, ent->port_ops); - host_set->n_ports = ent->n_ports; - host_set->irq = ent->irq; - host_set->irq2 = ent->irq2; - host_set->mmio_base = ent->mmio_base; - host_set->private_data = ent->private_data; - - /* register each port bound to this device */ - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap; - unsigned long xfer_mode_mask; - int irq_line = ent->irq; - - ap = ata_port_add(ent, host_set, i); - if (!ap) - goto err_out; - - host_set->ports[i] = ap; - - /* dummy? */ - if (ent->dummy_port_mask & (1 << i)) { - ata_port_printk(ap, KERN_INFO, "DUMMY\n"); - ap->ops = &ata_dummy_port_ops; - continue; - } - - /* start port */ - rc = ap->ops->port_start(ap); - if (rc) { - host_set->ports[i] = NULL; - scsi_host_put(ap->host); - goto err_out; - } - - /* Report the secondary IRQ for second channel legacy */ - if (i == 1 && ent->irq2) - irq_line = ent->irq2; - - xfer_mode_mask =(ap->udma_mask << ATA_SHIFT_UDMA) | - (ap->mwdma_mask << ATA_SHIFT_MWDMA) | - (ap->pio_mask << ATA_SHIFT_PIO); - - /* print per-port info to dmesg */ - ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%lX " - "ctl 0x%lX bmdma 0x%lX irq %d\n", - ap->flags & ATA_FLAG_SATA ? 'S' : 'P', - ata_mode_string(xfer_mode_mask), - ap->ioaddr.cmd_addr, - ap->ioaddr.ctl_addr, - ap->ioaddr.bmdma_addr, - irq_line); - - ata_chk_status(ap); - host_set->ops->irq_clear(ap); - ata_eh_freeze_port(ap); /* freeze port before requesting IRQ */ - } - - /* obtain irq, that may be shared between channels */ - rc = request_irq(ent->irq, ent->port_ops->irq_handler, ent->irq_flags, - DRV_NAME, host_set); - if (rc) { - dev_printk(KERN_ERR, dev, "irq %lu request failed: %d\n", - ent->irq, rc); - goto err_out; - } - - /* do we have a second IRQ for the other channel, eg legacy mode */ - if (ent->irq2) { - /* We will get weird core code crashes later if this is true - so trap it now */ - BUG_ON(ent->irq == ent->irq2); - - rc = request_irq(ent->irq2, ent->port_ops->irq_handler, ent->irq_flags, - DRV_NAME, host_set); - if (rc) { - dev_printk(KERN_ERR, dev, "irq %lu request failed: %d\n", - ent->irq2, rc); - goto err_out_free_irq; - } - } - - /* perform each probe synchronously */ - DPRINTK("probe begin\n"); - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; - u32 scontrol; - int rc; - - /* init sata_spd_limit to the current value */ - if (sata_scr_read(ap, SCR_CONTROL, &scontrol) == 0) { - int spd = (scontrol >> 4) & 0xf; - ap->hw_sata_spd_limit &= (1 << spd) - 1; - } - ap->sata_spd_limit = ap->hw_sata_spd_limit; - - rc = scsi_add_host(ap->host, dev); - if (rc) { - ata_port_printk(ap, KERN_ERR, "scsi_add_host failed\n"); - /* FIXME: do something useful here */ - /* FIXME: handle unconditional calls to - * scsi_scan_host and ata_host_remove, below, - * at the very least - */ - } - - if (ap->ops->error_handler) { - struct ata_eh_info *ehi = &ap->eh_info; - unsigned long flags; - - ata_port_probe(ap); - - /* kick EH for boot probing */ - spin_lock_irqsave(ap->lock, flags); - - ehi->probe_mask = (1 << ATA_MAX_DEVICES) - 1; - ehi->action |= ATA_EH_SOFTRESET; - ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET; - - ap->pflags |= ATA_PFLAG_LOADING; - ata_port_schedule_eh(ap); - - spin_unlock_irqrestore(ap->lock, flags); - - /* wait for EH to finish */ - ata_port_wait_eh(ap); - } else { - DPRINTK("ata%u: bus probe begin\n", ap->id); - rc = ata_bus_probe(ap); - DPRINTK("ata%u: bus probe end\n", ap->id); - - if (rc) { - /* FIXME: do something useful here? - * Current libata behavior will - * tear down everything when - * the module is removed - * or the h/w is unplugged. - */ - } - } - } - - /* probes are done, now scan each port's disk(s) */ - DPRINTK("host probe begin\n"); - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; - - ata_scsi_scan_host(ap); - } - - dev_set_drvdata(dev, host_set); - - VPRINTK("EXIT, returning %u\n", ent->n_ports); - return ent->n_ports; /* success */ - -err_out_free_irq: - free_irq(ent->irq, host_set); -err_out: - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; - if (ap) { - ap->ops->port_stop(ap); - scsi_host_put(ap->host); - } - } - - kfree(host_set); - VPRINTK("EXIT, returning 0\n"); - return 0; -} - -/** - * ata_port_detach - Detach ATA port in prepration of device removal - * @ap: ATA port to be detached - * - * Detach all ATA devices and the associated SCSI devices of @ap; - * then, remove the associated SCSI host. @ap is guaranteed to - * be quiescent on return from this function. - * - * LOCKING: - * Kernel thread context (may sleep). - */ -void ata_port_detach(struct ata_port *ap) -{ - unsigned long flags; - int i; - - if (!ap->ops->error_handler) - goto skip_eh; - - /* tell EH we're leaving & flush EH */ - spin_lock_irqsave(ap->lock, flags); - ap->pflags |= ATA_PFLAG_UNLOADING; - spin_unlock_irqrestore(ap->lock, flags); - - ata_port_wait_eh(ap); - - /* EH is now guaranteed to see UNLOADING, so no new device - * will be attached. Disable all existing devices. - */ - spin_lock_irqsave(ap->lock, flags); - - for (i = 0; i < ATA_MAX_DEVICES; i++) - ata_dev_disable(&ap->device[i]); - - spin_unlock_irqrestore(ap->lock, flags); - - /* Final freeze & EH. All in-flight commands are aborted. EH - * will be skipped and retrials will be terminated with bad - * target. - */ - spin_lock_irqsave(ap->lock, flags); - ata_port_freeze(ap); /* won't be thawed */ - spin_unlock_irqrestore(ap->lock, flags); - - ata_port_wait_eh(ap); - - /* Flush hotplug task. The sequence is similar to - * ata_port_flush_task(). - */ - flush_workqueue(ata_aux_wq); - cancel_delayed_work(&ap->hotplug_task); - flush_workqueue(ata_aux_wq); - - skip_eh: - /* remove the associated SCSI host */ - scsi_remove_host(ap->host); -} - -/** - * ata_host_set_remove - PCI layer callback for device removal - * @host_set: ATA host set that was removed - * - * Unregister all objects associated with this host set. Free those - * objects. - * - * LOCKING: - * Inherited from calling layer (may sleep). - */ - -void ata_host_set_remove(struct ata_host_set *host_set) -{ - unsigned int i; - - for (i = 0; i < host_set->n_ports; i++) - ata_port_detach(host_set->ports[i]); - - free_irq(host_set->irq, host_set); - if (host_set->irq2) - free_irq(host_set->irq2, host_set); - - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; - - ata_scsi_release(ap->host); - - if ((ap->flags & ATA_FLAG_NO_LEGACY) == 0) { - struct ata_ioports *ioaddr = &ap->ioaddr; - - /* FIXME: Add -ac IDE pci mods to remove these special cases */ - if (ioaddr->cmd_addr == ATA_PRIMARY_CMD) - release_region(ATA_PRIMARY_CMD, 8); - else if (ioaddr->cmd_addr == ATA_SECONDARY_CMD) - release_region(ATA_SECONDARY_CMD, 8); - } - - scsi_host_put(ap->host); - } - - if (host_set->ops->host_stop) - host_set->ops->host_stop(host_set); - - kfree(host_set); -} - -/** - * ata_scsi_release - SCSI layer callback hook for host unload - * @host: libata host to be unloaded - * - * Performs all duties necessary to shut down a libata port... - * Kill port kthread, disable port, and release resources. - * - * LOCKING: - * Inherited from SCSI layer. - * - * RETURNS: - * One. - */ - -int ata_scsi_release(struct Scsi_Host *host) -{ - struct ata_port *ap = ata_shost_to_port(host); - - DPRINTK("ENTER\n"); - - ap->ops->port_disable(ap); - ap->ops->port_stop(ap); - - DPRINTK("EXIT\n"); - return 1; -} - -struct ata_probe_ent * -ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port) -{ - struct ata_probe_ent *probe_ent; - - probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); - if (!probe_ent) { - printk(KERN_ERR DRV_NAME "(%s): out of memory\n", - kobject_name(&(dev->kobj))); - return NULL; - } - - INIT_LIST_HEAD(&probe_ent->node); - probe_ent->dev = dev; - - probe_ent->sht = port->sht; - probe_ent->host_flags = port->host_flags; - probe_ent->pio_mask = port->pio_mask; - probe_ent->mwdma_mask = port->mwdma_mask; - probe_ent->udma_mask = port->udma_mask; - probe_ent->port_ops = port->port_ops; - - return probe_ent; -} - -/** - * ata_std_ports - initialize ioaddr with standard port offsets. - * @ioaddr: IO address structure to be initialized - * - * Utility function which initializes data_addr, error_addr, - * feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr, - * device_addr, status_addr, and command_addr to standard offsets - * relative to cmd_addr. - * - * Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr. - */ - -void ata_std_ports(struct ata_ioports *ioaddr) -{ - ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA; - ioaddr->error_addr = ioaddr->cmd_addr + ATA_REG_ERR; - ioaddr->feature_addr = ioaddr->cmd_addr + ATA_REG_FEATURE; - ioaddr->nsect_addr = ioaddr->cmd_addr + ATA_REG_NSECT; - ioaddr->lbal_addr = ioaddr->cmd_addr + ATA_REG_LBAL; - ioaddr->lbam_addr = ioaddr->cmd_addr + ATA_REG_LBAM; - ioaddr->lbah_addr = ioaddr->cmd_addr + ATA_REG_LBAH; - ioaddr->device_addr = ioaddr->cmd_addr + ATA_REG_DEVICE; - ioaddr->status_addr = ioaddr->cmd_addr + ATA_REG_STATUS; - ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD; -} - - -#ifdef CONFIG_PCI - -void ata_pci_host_stop (struct ata_host_set *host_set) -{ - struct pci_dev *pdev = to_pci_dev(host_set->dev); - - pci_iounmap(pdev, host_set->mmio_base); -} - -/** - * ata_pci_remove_one - PCI layer callback for device removal - * @pdev: PCI device that was removed - * - * PCI layer indicates to libata via this hook that - * hot-unplug or module unload event has occurred. - * Handle this by unregistering all objects associated - * with this PCI device. Free those objects. Then finally - * release PCI resources and disable device. - * - * LOCKING: - * Inherited from PCI layer (may sleep). - */ - -void ata_pci_remove_one (struct pci_dev *pdev) -{ - struct device *dev = pci_dev_to_dev(pdev); - struct ata_host_set *host_set = dev_get_drvdata(dev); - - ata_host_set_remove(host_set); - - pci_release_regions(pdev); - pci_disable_device(pdev); - dev_set_drvdata(dev, NULL); -} - -/* move to PCI subsystem */ -int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits) -{ - unsigned long tmp = 0; - - switch (bits->width) { - case 1: { - u8 tmp8 = 0; - pci_read_config_byte(pdev, bits->reg, &tmp8); - tmp = tmp8; - break; - } - case 2: { - u16 tmp16 = 0; - pci_read_config_word(pdev, bits->reg, &tmp16); - tmp = tmp16; - break; - } - case 4: { - u32 tmp32 = 0; - pci_read_config_dword(pdev, bits->reg, &tmp32); - tmp = tmp32; - break; - } - - default: - return -EINVAL; - } - - tmp &= bits->mask; - - return (tmp == bits->val) ? 1 : 0; -} - -void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg) -{ - pci_save_state(pdev); - - if (mesg.event == PM_EVENT_SUSPEND) { - pci_disable_device(pdev); - pci_set_power_state(pdev, PCI_D3hot); - } -} - -void ata_pci_device_do_resume(struct pci_dev *pdev) -{ - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - pci_enable_device(pdev); - pci_set_master(pdev); -} - -int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) -{ - struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); - int rc = 0; - - rc = ata_host_set_suspend(host_set, mesg); - if (rc) - return rc; - - ata_pci_device_do_suspend(pdev, mesg); - - return 0; -} - -int ata_pci_device_resume(struct pci_dev *pdev) -{ - struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); - - ata_pci_device_do_resume(pdev); - ata_host_set_resume(host_set); - return 0; -} -#endif /* CONFIG_PCI */ - - -static int __init ata_init(void) -{ - ata_probe_timeout *= HZ; - ata_wq = create_workqueue("ata"); - if (!ata_wq) - return -ENOMEM; - - ata_aux_wq = create_singlethread_workqueue("ata_aux"); - if (!ata_aux_wq) { - destroy_workqueue(ata_wq); - return -ENOMEM; - } - - printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n"); - return 0; -} - -static void __exit ata_exit(void) -{ - destroy_workqueue(ata_wq); - destroy_workqueue(ata_aux_wq); -} - -module_init(ata_init); -module_exit(ata_exit); - -static unsigned long ratelimit_time; -static DEFINE_SPINLOCK(ata_ratelimit_lock); - -int ata_ratelimit(void) -{ - int rc; - unsigned long flags; - - spin_lock_irqsave(&ata_ratelimit_lock, flags); - - if (time_after(jiffies, ratelimit_time)) { - rc = 1; - ratelimit_time = jiffies + (HZ/5); - } else - rc = 0; - - spin_unlock_irqrestore(&ata_ratelimit_lock, flags); - - return rc; -} - -/** - * ata_wait_register - wait until register value changes - * @reg: IO-mapped register - * @mask: Mask to apply to read register value - * @val: Wait condition - * @interval_msec: polling interval in milliseconds - * @timeout_msec: timeout in milliseconds - * - * Waiting for some bits of register to change is a common - * operation for ATA controllers. This function reads 32bit LE - * IO-mapped register @reg and tests for the following condition. - * - * (*@reg & mask) != val - * - * If the condition is met, it returns; otherwise, the process is - * repeated after @interval_msec until timeout. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * The final register value. - */ -u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, - unsigned long interval_msec, - unsigned long timeout_msec) -{ - unsigned long timeout; - u32 tmp; - - tmp = ioread32(reg); - - /* Calculate timeout _after_ the first read to make sure - * preceding writes reach the controller before starting to - * eat away the timeout. - */ - timeout = jiffies + (timeout_msec * HZ) / 1000; - - while ((tmp & mask) == val && time_before(jiffies, timeout)) { - msleep(interval_msec); - tmp = ioread32(reg); - } - - return tmp; -} - -/* - * Dummy port_ops - */ -static void ata_dummy_noret(struct ata_port *ap) { } -static int ata_dummy_ret0(struct ata_port *ap) { return 0; } -static void ata_dummy_qc_noret(struct ata_queued_cmd *qc) { } - -static u8 ata_dummy_check_status(struct ata_port *ap) -{ - return ATA_DRDY; -} - -static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc) -{ - return AC_ERR_SYSTEM; -} - -const struct ata_port_operations ata_dummy_port_ops = { - .port_disable = ata_port_disable, - .check_status = ata_dummy_check_status, - .check_altstatus = ata_dummy_check_status, - .dev_select = ata_noop_dev_select, - .qc_prep = ata_noop_qc_prep, - .qc_issue = ata_dummy_qc_issue, - .freeze = ata_dummy_noret, - .thaw = ata_dummy_noret, - .error_handler = ata_dummy_noret, - .post_internal_cmd = ata_dummy_qc_noret, - .irq_clear = ata_dummy_noret, - .port_start = ata_dummy_ret0, - .port_stop = ata_dummy_noret, -}; - -/* - * libata is essentially a library of internal helper functions for - * low-level ATA host controller drivers. As such, the API/ABI is - * likely to change as new drivers are added and updated. - * Do not depend on ABI/API stability. - */ - -EXPORT_SYMBOL_GPL(sata_deb_timing_normal); -EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug); -EXPORT_SYMBOL_GPL(sata_deb_timing_long); -EXPORT_SYMBOL_GPL(ata_dummy_port_ops); -EXPORT_SYMBOL_GPL(ata_std_bios_param); -EXPORT_SYMBOL_GPL(ata_std_ports); -EXPORT_SYMBOL_GPL(ata_host_set_init); -EXPORT_SYMBOL_GPL(ata_device_add); -EXPORT_SYMBOL_GPL(ata_port_detach); -EXPORT_SYMBOL_GPL(ata_host_set_remove); -EXPORT_SYMBOL_GPL(ata_sg_init); -EXPORT_SYMBOL_GPL(ata_sg_init_one); -EXPORT_SYMBOL_GPL(ata_hsm_move); -EXPORT_SYMBOL_GPL(ata_qc_complete); -EXPORT_SYMBOL_GPL(ata_qc_complete_multiple); -EXPORT_SYMBOL_GPL(ata_qc_issue_prot); -EXPORT_SYMBOL_GPL(ata_tf_load); -EXPORT_SYMBOL_GPL(ata_tf_read); -EXPORT_SYMBOL_GPL(ata_noop_dev_select); -EXPORT_SYMBOL_GPL(ata_std_dev_select); -EXPORT_SYMBOL_GPL(ata_tf_to_fis); -EXPORT_SYMBOL_GPL(ata_tf_from_fis); -EXPORT_SYMBOL_GPL(ata_check_status); -EXPORT_SYMBOL_GPL(ata_altstatus); -EXPORT_SYMBOL_GPL(ata_exec_command); -EXPORT_SYMBOL_GPL(ata_port_start); -EXPORT_SYMBOL_GPL(ata_port_stop); -EXPORT_SYMBOL_GPL(ata_host_stop); -EXPORT_SYMBOL_GPL(ata_interrupt); -EXPORT_SYMBOL_GPL(ata_mmio_data_xfer); -EXPORT_SYMBOL_GPL(ata_pio_data_xfer); -EXPORT_SYMBOL_GPL(ata_pio_data_xfer_noirq); -EXPORT_SYMBOL_GPL(ata_qc_prep); -EXPORT_SYMBOL_GPL(ata_noop_qc_prep); -EXPORT_SYMBOL_GPL(ata_bmdma_setup); -EXPORT_SYMBOL_GPL(ata_bmdma_start); -EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear); -EXPORT_SYMBOL_GPL(ata_bmdma_status); -EXPORT_SYMBOL_GPL(ata_bmdma_stop); -EXPORT_SYMBOL_GPL(ata_bmdma_freeze); -EXPORT_SYMBOL_GPL(ata_bmdma_thaw); -EXPORT_SYMBOL_GPL(ata_bmdma_drive_eh); -EXPORT_SYMBOL_GPL(ata_bmdma_error_handler); -EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd); -EXPORT_SYMBOL_GPL(ata_port_probe); -EXPORT_SYMBOL_GPL(sata_set_spd); -EXPORT_SYMBOL_GPL(sata_phy_debounce); -EXPORT_SYMBOL_GPL(sata_phy_resume); -EXPORT_SYMBOL_GPL(sata_phy_reset); -EXPORT_SYMBOL_GPL(__sata_phy_reset); -EXPORT_SYMBOL_GPL(ata_bus_reset); -EXPORT_SYMBOL_GPL(ata_std_prereset); -EXPORT_SYMBOL_GPL(ata_std_softreset); -EXPORT_SYMBOL_GPL(sata_std_hardreset); -EXPORT_SYMBOL_GPL(ata_std_postreset); -EXPORT_SYMBOL_GPL(ata_dev_revalidate); -EXPORT_SYMBOL_GPL(ata_dev_classify); -EXPORT_SYMBOL_GPL(ata_dev_pair); -EXPORT_SYMBOL_GPL(ata_port_disable); -EXPORT_SYMBOL_GPL(ata_ratelimit); -EXPORT_SYMBOL_GPL(ata_wait_register); -EXPORT_SYMBOL_GPL(ata_busy_sleep); -EXPORT_SYMBOL_GPL(ata_port_queue_task); -EXPORT_SYMBOL_GPL(ata_scsi_ioctl); -EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); -EXPORT_SYMBOL_GPL(ata_scsi_slave_config); -EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy); -EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth); -EXPORT_SYMBOL_GPL(ata_scsi_release); -EXPORT_SYMBOL_GPL(ata_host_intr); -EXPORT_SYMBOL_GPL(sata_scr_valid); -EXPORT_SYMBOL_GPL(sata_scr_read); -EXPORT_SYMBOL_GPL(sata_scr_write); -EXPORT_SYMBOL_GPL(sata_scr_write_flush); -EXPORT_SYMBOL_GPL(ata_port_online); -EXPORT_SYMBOL_GPL(ata_port_offline); -EXPORT_SYMBOL_GPL(ata_host_set_suspend); -EXPORT_SYMBOL_GPL(ata_host_set_resume); -EXPORT_SYMBOL_GPL(ata_id_string); -EXPORT_SYMBOL_GPL(ata_id_c_string); -EXPORT_SYMBOL_GPL(ata_scsi_simulate); - -EXPORT_SYMBOL_GPL(ata_pio_need_iordy); -EXPORT_SYMBOL_GPL(ata_timing_compute); -EXPORT_SYMBOL_GPL(ata_timing_merge); - -#ifdef CONFIG_PCI -EXPORT_SYMBOL_GPL(pci_test_config_bits); -EXPORT_SYMBOL_GPL(ata_pci_host_stop); -EXPORT_SYMBOL_GPL(ata_pci_init_native_mode); -EXPORT_SYMBOL_GPL(ata_pci_init_one); -EXPORT_SYMBOL_GPL(ata_pci_remove_one); -EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend); -EXPORT_SYMBOL_GPL(ata_pci_device_do_resume); -EXPORT_SYMBOL_GPL(ata_pci_device_suspend); -EXPORT_SYMBOL_GPL(ata_pci_device_resume); -EXPORT_SYMBOL_GPL(ata_pci_default_filter); -EXPORT_SYMBOL_GPL(ata_pci_clear_simplex); -#endif /* CONFIG_PCI */ - -EXPORT_SYMBOL_GPL(ata_scsi_device_suspend); -EXPORT_SYMBOL_GPL(ata_scsi_device_resume); - -EXPORT_SYMBOL_GPL(ata_eng_timeout); -EXPORT_SYMBOL_GPL(ata_port_schedule_eh); -EXPORT_SYMBOL_GPL(ata_port_abort); -EXPORT_SYMBOL_GPL(ata_port_freeze); -EXPORT_SYMBOL_GPL(ata_eh_freeze_port); -EXPORT_SYMBOL_GPL(ata_eh_thaw_port); -EXPORT_SYMBOL_GPL(ata_eh_qc_complete); -EXPORT_SYMBOL_GPL(ata_eh_qc_retry); -EXPORT_SYMBOL_GPL(ata_do_eh); diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c deleted file mode 100644 index 29f59345305..00000000000 --- a/drivers/scsi/libata-eh.c +++ /dev/null @@ -1,2246 +0,0 @@ -/* - * libata-eh.c - libata error handling - * - * Maintained by: Jeff Garzik - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * Copyright 2006 Tejun Heo - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, - * USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Hardware documentation available from http://www.t13.org/ and - * http://www.sata-io.org/ - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include "scsi_transport_api.h" - -#include - -#include "libata.h" - -static void __ata_port_freeze(struct ata_port *ap); -static void ata_eh_finish(struct ata_port *ap); -static void ata_eh_handle_port_suspend(struct ata_port *ap); -static void ata_eh_handle_port_resume(struct ata_port *ap); - -static void ata_ering_record(struct ata_ering *ering, int is_io, - unsigned int err_mask) -{ - struct ata_ering_entry *ent; - - WARN_ON(!err_mask); - - ering->cursor++; - ering->cursor %= ATA_ERING_SIZE; - - ent = &ering->ring[ering->cursor]; - ent->is_io = is_io; - ent->err_mask = err_mask; - ent->timestamp = get_jiffies_64(); -} - -static struct ata_ering_entry * ata_ering_top(struct ata_ering *ering) -{ - struct ata_ering_entry *ent = &ering->ring[ering->cursor]; - if (!ent->err_mask) - return NULL; - return ent; -} - -static int ata_ering_map(struct ata_ering *ering, - int (*map_fn)(struct ata_ering_entry *, void *), - void *arg) -{ - int idx, rc = 0; - struct ata_ering_entry *ent; - - idx = ering->cursor; - do { - ent = &ering->ring[idx]; - if (!ent->err_mask) - break; - rc = map_fn(ent, arg); - if (rc) - break; - idx = (idx - 1 + ATA_ERING_SIZE) % ATA_ERING_SIZE; - } while (idx != ering->cursor); - - return rc; -} - -static unsigned int ata_eh_dev_action(struct ata_device *dev) -{ - struct ata_eh_context *ehc = &dev->ap->eh_context; - - return ehc->i.action | ehc->i.dev_action[dev->devno]; -} - -static void ata_eh_clear_action(struct ata_device *dev, - struct ata_eh_info *ehi, unsigned int action) -{ - int i; - - if (!dev) { - ehi->action &= ~action; - for (i = 0; i < ATA_MAX_DEVICES; i++) - ehi->dev_action[i] &= ~action; - } else { - /* doesn't make sense for port-wide EH actions */ - WARN_ON(!(action & ATA_EH_PERDEV_MASK)); - - /* break ehi->action into ehi->dev_action */ - if (ehi->action & action) { - for (i = 0; i < ATA_MAX_DEVICES; i++) - ehi->dev_action[i] |= ehi->action & action; - ehi->action &= ~action; - } - - /* turn off the specified per-dev action */ - ehi->dev_action[dev->devno] &= ~action; - } -} - -/** - * ata_scsi_timed_out - SCSI layer time out callback - * @cmd: timed out SCSI command - * - * Handles SCSI layer timeout. We race with normal completion of - * the qc for @cmd. If the qc is already gone, we lose and let - * the scsi command finish (EH_HANDLED). Otherwise, the qc has - * timed out and EH should be invoked. Prevent ata_qc_complete() - * from finishing it by setting EH_SCHEDULED and return - * EH_NOT_HANDLED. - * - * TODO: kill this function once old EH is gone. - * - * LOCKING: - * Called from timer context - * - * RETURNS: - * EH_HANDLED or EH_NOT_HANDLED - */ -enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) -{ - struct Scsi_Host *host = cmd->device->host; - struct ata_port *ap = ata_shost_to_port(host); - unsigned long flags; - struct ata_queued_cmd *qc; - enum scsi_eh_timer_return ret; - - DPRINTK("ENTER\n"); - - if (ap->ops->error_handler) { - ret = EH_NOT_HANDLED; - goto out; - } - - ret = EH_HANDLED; - spin_lock_irqsave(ap->lock, flags); - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc) { - WARN_ON(qc->scsicmd != cmd); - qc->flags |= ATA_QCFLAG_EH_SCHEDULED; - qc->err_mask |= AC_ERR_TIMEOUT; - ret = EH_NOT_HANDLED; - } - spin_unlock_irqrestore(ap->lock, flags); - - out: - DPRINTK("EXIT, ret=%d\n", ret); - return ret; -} - -/** - * ata_scsi_error - SCSI layer error handler callback - * @host: SCSI host on which error occurred - * - * Handles SCSI-layer-thrown error events. - * - * LOCKING: - * Inherited from SCSI layer (none, can sleep) - * - * RETURNS: - * Zero. - */ -void ata_scsi_error(struct Scsi_Host *host) -{ - struct ata_port *ap = ata_shost_to_port(host); - int i, repeat_cnt = ATA_EH_MAX_REPEAT; - unsigned long flags; - - DPRINTK("ENTER\n"); - - /* synchronize with port task */ - ata_port_flush_task(ap); - - /* synchronize with host_set lock and sort out timeouts */ - - /* For new EH, all qcs are finished in one of three ways - - * normal completion, error completion, and SCSI timeout. - * Both cmpletions can race against SCSI timeout. When normal - * completion wins, the qc never reaches EH. When error - * completion wins, the qc has ATA_QCFLAG_FAILED set. - * - * When SCSI timeout wins, things are a bit more complex. - * Normal or error completion can occur after the timeout but - * before this point. In such cases, both types of - * completions are honored. A scmd is determined to have - * timed out iff its associated qc is active and not failed. - */ - if (ap->ops->error_handler) { - struct scsi_cmnd *scmd, *tmp; - int nr_timedout = 0; - - spin_lock_irqsave(ap->lock, flags); - - list_for_each_entry_safe(scmd, tmp, &host->eh_cmd_q, eh_entry) { - struct ata_queued_cmd *qc; - - for (i = 0; i < ATA_MAX_QUEUE; i++) { - qc = __ata_qc_from_tag(ap, i); - if (qc->flags & ATA_QCFLAG_ACTIVE && - qc->scsicmd == scmd) - break; - } - - if (i < ATA_MAX_QUEUE) { - /* the scmd has an associated qc */ - if (!(qc->flags & ATA_QCFLAG_FAILED)) { - /* which hasn't failed yet, timeout */ - qc->err_mask |= AC_ERR_TIMEOUT; - qc->flags |= ATA_QCFLAG_FAILED; - nr_timedout++; - } - } else { - /* Normal completion occurred after - * SCSI timeout but before this point. - * Successfully complete it. - */ - scmd->retries = scmd->allowed; - scsi_eh_finish_cmd(scmd, &ap->eh_done_q); - } - } - - /* If we have timed out qcs. They belong to EH from - * this point but the state of the controller is - * unknown. Freeze the port to make sure the IRQ - * handler doesn't diddle with those qcs. This must - * be done atomically w.r.t. setting QCFLAG_FAILED. - */ - if (nr_timedout) - __ata_port_freeze(ap); - - spin_unlock_irqrestore(ap->lock, flags); - } else - spin_unlock_wait(ap->lock); - - repeat: - /* invoke error handler */ - if (ap->ops->error_handler) { - /* process port resume request */ - ata_eh_handle_port_resume(ap); - - /* fetch & clear EH info */ - spin_lock_irqsave(ap->lock, flags); - - memset(&ap->eh_context, 0, sizeof(ap->eh_context)); - ap->eh_context.i = ap->eh_info; - memset(&ap->eh_info, 0, sizeof(ap->eh_info)); - - ap->pflags |= ATA_PFLAG_EH_IN_PROGRESS; - ap->pflags &= ~ATA_PFLAG_EH_PENDING; - - spin_unlock_irqrestore(ap->lock, flags); - - /* invoke EH, skip if unloading or suspended */ - if (!(ap->pflags & (ATA_PFLAG_UNLOADING | ATA_PFLAG_SUSPENDED))) - ap->ops->error_handler(ap); - else - ata_eh_finish(ap); - - /* process port suspend request */ - ata_eh_handle_port_suspend(ap); - - /* Exception might have happend after ->error_handler - * recovered the port but before this point. Repeat - * EH in such case. - */ - spin_lock_irqsave(ap->lock, flags); - - if (ap->pflags & ATA_PFLAG_EH_PENDING) { - if (--repeat_cnt) { - ata_port_printk(ap, KERN_INFO, - "EH pending after completion, " - "repeating EH (cnt=%d)\n", repeat_cnt); - spin_unlock_irqrestore(ap->lock, flags); - goto repeat; - } - ata_port_printk(ap, KERN_ERR, "EH pending after %d " - "tries, giving up\n", ATA_EH_MAX_REPEAT); - } - - /* this run is complete, make sure EH info is clear */ - memset(&ap->eh_info, 0, sizeof(ap->eh_info)); - - /* Clear host_eh_scheduled while holding ap->lock such - * that if exception occurs after this point but - * before EH completion, SCSI midlayer will - * re-initiate EH. - */ - host->host_eh_scheduled = 0; - - spin_unlock_irqrestore(ap->lock, flags); - } else { - WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL); - ap->ops->eng_timeout(ap); - } - - /* finish or retry handled scmd's and clean up */ - WARN_ON(host->host_failed || !list_empty(&host->eh_cmd_q)); - - scsi_eh_flush_done_q(&ap->eh_done_q); - - /* clean up */ - spin_lock_irqsave(ap->lock, flags); - - if (ap->pflags & ATA_PFLAG_LOADING) - ap->pflags &= ~ATA_PFLAG_LOADING; - else if (ap->pflags & ATA_PFLAG_SCSI_HOTPLUG) - queue_work(ata_aux_wq, &ap->hotplug_task); - - if (ap->pflags & ATA_PFLAG_RECOVERED) - ata_port_printk(ap, KERN_INFO, "EH complete\n"); - - ap->pflags &= ~(ATA_PFLAG_SCSI_HOTPLUG | ATA_PFLAG_RECOVERED); - - /* tell wait_eh that we're done */ - ap->pflags &= ~ATA_PFLAG_EH_IN_PROGRESS; - wake_up_all(&ap->eh_wait_q); - - spin_unlock_irqrestore(ap->lock, flags); - - DPRINTK("EXIT\n"); -} - -/** - * ata_port_wait_eh - Wait for the currently pending EH to complete - * @ap: Port to wait EH for - * - * Wait until the currently pending EH is complete. - * - * LOCKING: - * Kernel thread context (may sleep). - */ -void ata_port_wait_eh(struct ata_port *ap) -{ - unsigned long flags; - DEFINE_WAIT(wait); - - retry: - spin_lock_irqsave(ap->lock, flags); - - while (ap->pflags & (ATA_PFLAG_EH_PENDING | ATA_PFLAG_EH_IN_PROGRESS)) { - prepare_to_wait(&ap->eh_wait_q, &wait, TASK_UNINTERRUPTIBLE); - spin_unlock_irqrestore(ap->lock, flags); - schedule(); - spin_lock_irqsave(ap->lock, flags); - } - finish_wait(&ap->eh_wait_q, &wait); - - spin_unlock_irqrestore(ap->lock, flags); - - /* make sure SCSI EH is complete */ - if (scsi_host_in_recovery(ap->host)) { - msleep(10); - goto retry; - } -} - -/** - * ata_qc_timeout - Handle timeout of queued command - * @qc: Command that timed out - * - * Some part of the kernel (currently, only the SCSI layer) - * has noticed that the active command on port @ap has not - * completed after a specified length of time. Handle this - * condition by disabling DMA (if necessary) and completing - * transactions, with error if necessary. - * - * This also handles the case of the "lost interrupt", where - * for some reason (possibly hardware bug, possibly driver bug) - * an interrupt was not delivered to the driver, even though the - * transaction completed successfully. - * - * TODO: kill this function once old EH is gone. - * - * LOCKING: - * Inherited from SCSI layer (none, can sleep) - */ -static void ata_qc_timeout(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - u8 host_stat = 0, drv_stat; - unsigned long flags; - - DPRINTK("ENTER\n"); - - ap->hsm_task_state = HSM_ST_IDLE; - - spin_lock_irqsave(ap->lock, flags); - - switch (qc->tf.protocol) { - - case ATA_PROT_DMA: - case ATA_PROT_ATAPI_DMA: - host_stat = ap->ops->bmdma_status(ap); - - /* before we do anything else, clear DMA-Start bit */ - ap->ops->bmdma_stop(qc); - - /* fall through */ - - default: - ata_altstatus(ap); - drv_stat = ata_chk_status(ap); - - /* ack bmdma irq events */ - ap->ops->irq_clear(ap); - - ata_dev_printk(qc->dev, KERN_ERR, "command 0x%x timeout, " - "stat 0x%x host_stat 0x%x\n", - qc->tf.command, drv_stat, host_stat); - - /* complete taskfile transaction */ - qc->err_mask |= AC_ERR_TIMEOUT; - break; - } - - spin_unlock_irqrestore(ap->lock, flags); - - ata_eh_qc_complete(qc); - - DPRINTK("EXIT\n"); -} - -/** - * ata_eng_timeout - Handle timeout of queued command - * @ap: Port on which timed-out command is active - * - * Some part of the kernel (currently, only the SCSI layer) - * has noticed that the active command on port @ap has not - * completed after a specified length of time. Handle this - * condition by disabling DMA (if necessary) and completing - * transactions, with error if necessary. - * - * This also handles the case of the "lost interrupt", where - * for some reason (possibly hardware bug, possibly driver bug) - * an interrupt was not delivered to the driver, even though the - * transaction completed successfully. - * - * TODO: kill this function once old EH is gone. - * - * LOCKING: - * Inherited from SCSI layer (none, can sleep) - */ -void ata_eng_timeout(struct ata_port *ap) -{ - DPRINTK("ENTER\n"); - - ata_qc_timeout(ata_qc_from_tag(ap, ap->active_tag)); - - DPRINTK("EXIT\n"); -} - -/** - * ata_qc_schedule_eh - schedule qc for error handling - * @qc: command to schedule error handling for - * - * Schedule error handling for @qc. EH will kick in as soon as - * other commands are drained. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_qc_schedule_eh(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - WARN_ON(!ap->ops->error_handler); - - qc->flags |= ATA_QCFLAG_FAILED; - qc->ap->pflags |= ATA_PFLAG_EH_PENDING; - - /* The following will fail if timeout has already expired. - * ata_scsi_error() takes care of such scmds on EH entry. - * Note that ATA_QCFLAG_FAILED is unconditionally set after - * this function completes. - */ - scsi_req_abort_cmd(qc->scsicmd); -} - -/** - * ata_port_schedule_eh - schedule error handling without a qc - * @ap: ATA port to schedule EH for - * - * Schedule error handling for @ap. EH will kick in as soon as - * all commands are drained. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_port_schedule_eh(struct ata_port *ap) -{ - WARN_ON(!ap->ops->error_handler); - - ap->pflags |= ATA_PFLAG_EH_PENDING; - scsi_schedule_eh(ap->host); - - DPRINTK("port EH scheduled\n"); -} - -/** - * ata_port_abort - abort all qc's on the port - * @ap: ATA port to abort qc's for - * - * Abort all active qc's of @ap and schedule EH. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Number of aborted qc's. - */ -int ata_port_abort(struct ata_port *ap) -{ - int tag, nr_aborted = 0; - - WARN_ON(!ap->ops->error_handler); - - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag); - - if (qc) { - qc->flags |= ATA_QCFLAG_FAILED; - ata_qc_complete(qc); - nr_aborted++; - } - } - - if (!nr_aborted) - ata_port_schedule_eh(ap); - - return nr_aborted; -} - -/** - * __ata_port_freeze - freeze port - * @ap: ATA port to freeze - * - * This function is called when HSM violation or some other - * condition disrupts normal operation of the port. Frozen port - * is not allowed to perform any operation until the port is - * thawed, which usually follows a successful reset. - * - * ap->ops->freeze() callback can be used for freezing the port - * hardware-wise (e.g. mask interrupt and stop DMA engine). If a - * port cannot be frozen hardware-wise, the interrupt handler - * must ack and clear interrupts unconditionally while the port - * is frozen. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -static void __ata_port_freeze(struct ata_port *ap) -{ - WARN_ON(!ap->ops->error_handler); - - if (ap->ops->freeze) - ap->ops->freeze(ap); - - ap->pflags |= ATA_PFLAG_FROZEN; - - DPRINTK("ata%u port frozen\n", ap->id); -} - -/** - * ata_port_freeze - abort & freeze port - * @ap: ATA port to freeze - * - * Abort and freeze @ap. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Number of aborted commands. - */ -int ata_port_freeze(struct ata_port *ap) -{ - int nr_aborted; - - WARN_ON(!ap->ops->error_handler); - - nr_aborted = ata_port_abort(ap); - __ata_port_freeze(ap); - - return nr_aborted; -} - -/** - * ata_eh_freeze_port - EH helper to freeze port - * @ap: ATA port to freeze - * - * Freeze @ap. - * - * LOCKING: - * None. - */ -void ata_eh_freeze_port(struct ata_port *ap) -{ - unsigned long flags; - - if (!ap->ops->error_handler) - return; - - spin_lock_irqsave(ap->lock, flags); - __ata_port_freeze(ap); - spin_unlock_irqrestore(ap->lock, flags); -} - -/** - * ata_port_thaw_port - EH helper to thaw port - * @ap: ATA port to thaw - * - * Thaw frozen port @ap. - * - * LOCKING: - * None. - */ -void ata_eh_thaw_port(struct ata_port *ap) -{ - unsigned long flags; - - if (!ap->ops->error_handler) - return; - - spin_lock_irqsave(ap->lock, flags); - - ap->pflags &= ~ATA_PFLAG_FROZEN; - - if (ap->ops->thaw) - ap->ops->thaw(ap); - - spin_unlock_irqrestore(ap->lock, flags); - - DPRINTK("ata%u port thawed\n", ap->id); -} - -static void ata_eh_scsidone(struct scsi_cmnd *scmd) -{ - /* nada */ -} - -static void __ata_eh_qc_complete(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct scsi_cmnd *scmd = qc->scsicmd; - unsigned long flags; - - spin_lock_irqsave(ap->lock, flags); - qc->scsidone = ata_eh_scsidone; - __ata_qc_complete(qc); - WARN_ON(ata_tag_valid(qc->tag)); - spin_unlock_irqrestore(ap->lock, flags); - - scsi_eh_finish_cmd(scmd, &ap->eh_done_q); -} - -/** - * ata_eh_qc_complete - Complete an active ATA command from EH - * @qc: Command to complete - * - * Indicate to the mid and upper layers that an ATA command has - * completed. To be used from EH. - */ -void ata_eh_qc_complete(struct ata_queued_cmd *qc) -{ - struct scsi_cmnd *scmd = qc->scsicmd; - scmd->retries = scmd->allowed; - __ata_eh_qc_complete(qc); -} - -/** - * ata_eh_qc_retry - Tell midlayer to retry an ATA command after EH - * @qc: Command to retry - * - * Indicate to the mid and upper layers that an ATA command - * should be retried. To be used from EH. - * - * SCSI midlayer limits the number of retries to scmd->allowed. - * scmd->retries is decremented for commands which get retried - * due to unrelated failures (qc->err_mask is zero). - */ -void ata_eh_qc_retry(struct ata_queued_cmd *qc) -{ - struct scsi_cmnd *scmd = qc->scsicmd; - if (!qc->err_mask && scmd->retries) - scmd->retries--; - __ata_eh_qc_complete(qc); -} - -/** - * ata_eh_detach_dev - detach ATA device - * @dev: ATA device to detach - * - * Detach @dev. - * - * LOCKING: - * None. - */ -static void ata_eh_detach_dev(struct ata_device *dev) -{ - struct ata_port *ap = dev->ap; - unsigned long flags; - - ata_dev_disable(dev); - - spin_lock_irqsave(ap->lock, flags); - - dev->flags &= ~ATA_DFLAG_DETACH; - - if (ata_scsi_offline_dev(dev)) { - dev->flags |= ATA_DFLAG_DETACHED; - ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG; - } - - /* clear per-dev EH actions */ - ata_eh_clear_action(dev, &ap->eh_info, ATA_EH_PERDEV_MASK); - ata_eh_clear_action(dev, &ap->eh_context.i, ATA_EH_PERDEV_MASK); - - spin_unlock_irqrestore(ap->lock, flags); -} - -/** - * ata_eh_about_to_do - about to perform eh_action - * @ap: target ATA port - * @dev: target ATA dev for per-dev action (can be NULL) - * @action: action about to be performed - * - * Called just before performing EH actions to clear related bits - * in @ap->eh_info such that eh actions are not unnecessarily - * repeated. - * - * LOCKING: - * None. - */ -static void ata_eh_about_to_do(struct ata_port *ap, struct ata_device *dev, - unsigned int action) -{ - unsigned long flags; - struct ata_eh_info *ehi = &ap->eh_info; - struct ata_eh_context *ehc = &ap->eh_context; - - spin_lock_irqsave(ap->lock, flags); - - /* Reset is represented by combination of actions and EHI - * flags. Suck in all related bits before clearing eh_info to - * avoid losing requested action. - */ - if (action & ATA_EH_RESET_MASK) { - ehc->i.action |= ehi->action & ATA_EH_RESET_MASK; - ehc->i.flags |= ehi->flags & ATA_EHI_RESET_MODIFIER_MASK; - - /* make sure all reset actions are cleared & clear EHI flags */ - action |= ATA_EH_RESET_MASK; - ehi->flags &= ~ATA_EHI_RESET_MODIFIER_MASK; - } - - ata_eh_clear_action(dev, ehi, action); - - if (!(ehc->i.flags & ATA_EHI_QUIET)) - ap->pflags |= ATA_PFLAG_RECOVERED; - - spin_unlock_irqrestore(ap->lock, flags); -} - -/** - * ata_eh_done - EH action complete - * @ap: target ATA port - * @dev: target ATA dev for per-dev action (can be NULL) - * @action: action just completed - * - * Called right after performing EH actions to clear related bits - * in @ap->eh_context. - * - * LOCKING: - * None. - */ -static void ata_eh_done(struct ata_port *ap, struct ata_device *dev, - unsigned int action) -{ - /* if reset is complete, clear all reset actions & reset modifier */ - if (action & ATA_EH_RESET_MASK) { - action |= ATA_EH_RESET_MASK; - ap->eh_context.i.flags &= ~ATA_EHI_RESET_MODIFIER_MASK; - } - - ata_eh_clear_action(dev, &ap->eh_context.i, action); -} - -/** - * ata_err_string - convert err_mask to descriptive string - * @err_mask: error mask to convert to string - * - * Convert @err_mask to descriptive string. Errors are - * prioritized according to severity and only the most severe - * error is reported. - * - * LOCKING: - * None. - * - * RETURNS: - * Descriptive string for @err_mask - */ -static const char * ata_err_string(unsigned int err_mask) -{ - if (err_mask & AC_ERR_HOST_BUS) - return "host bus error"; - if (err_mask & AC_ERR_ATA_BUS) - return "ATA bus error"; - if (err_mask & AC_ERR_TIMEOUT) - return "timeout"; - if (err_mask & AC_ERR_HSM) - return "HSM violation"; - if (err_mask & AC_ERR_SYSTEM) - return "internal error"; - if (err_mask & AC_ERR_MEDIA) - return "media error"; - if (err_mask & AC_ERR_INVALID) - return "invalid argument"; - if (err_mask & AC_ERR_DEV) - return "device error"; - return "unknown error"; -} - -/** - * ata_read_log_page - read a specific log page - * @dev: target device - * @page: page to read - * @buf: buffer to store read page - * @sectors: number of sectors to read - * - * Read log page using READ_LOG_EXT command. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0 on success, AC_ERR_* mask otherwise. - */ -static unsigned int ata_read_log_page(struct ata_device *dev, - u8 page, void *buf, unsigned int sectors) -{ - struct ata_taskfile tf; - unsigned int err_mask; - - DPRINTK("read log page - page %d\n", page); - - ata_tf_init(dev, &tf); - tf.command = ATA_CMD_READ_LOG_EXT; - tf.lbal = page; - tf.nsect = sectors; - tf.hob_nsect = sectors >> 8; - tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_LBA48 | ATA_TFLAG_DEVICE; - tf.protocol = ATA_PROT_PIO; - - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE, - buf, sectors * ATA_SECT_SIZE); - - DPRINTK("EXIT, err_mask=%x\n", err_mask); - return err_mask; -} - -/** - * ata_eh_read_log_10h - Read log page 10h for NCQ error details - * @dev: Device to read log page 10h from - * @tag: Resulting tag of the failed command - * @tf: Resulting taskfile registers of the failed command - * - * Read log page 10h to obtain NCQ error details and clear error - * condition. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -static int ata_eh_read_log_10h(struct ata_device *dev, - int *tag, struct ata_taskfile *tf) -{ - u8 *buf = dev->ap->sector_buf; - unsigned int err_mask; - u8 csum; - int i; - - err_mask = ata_read_log_page(dev, ATA_LOG_SATA_NCQ, buf, 1); - if (err_mask) - return -EIO; - - csum = 0; - for (i = 0; i < ATA_SECT_SIZE; i++) - csum += buf[i]; - if (csum) - ata_dev_printk(dev, KERN_WARNING, - "invalid checksum 0x%x on log page 10h\n", csum); - - if (buf[0] & 0x80) - return -ENOENT; - - *tag = buf[0] & 0x1f; - - tf->command = buf[2]; - tf->feature = buf[3]; - tf->lbal = buf[4]; - tf->lbam = buf[5]; - tf->lbah = buf[6]; - tf->device = buf[7]; - tf->hob_lbal = buf[8]; - tf->hob_lbam = buf[9]; - tf->hob_lbah = buf[10]; - tf->nsect = buf[12]; - tf->hob_nsect = buf[13]; - - return 0; -} - -/** - * atapi_eh_request_sense - perform ATAPI REQUEST_SENSE - * @dev: device to perform REQUEST_SENSE to - * @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long) - * - * Perform ATAPI REQUEST_SENSE after the device reported CHECK - * SENSE. This function is EH helper. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0 on success, AC_ERR_* mask on failure - */ -static unsigned int atapi_eh_request_sense(struct ata_device *dev, - unsigned char *sense_buf) -{ - struct ata_port *ap = dev->ap; - struct ata_taskfile tf; - u8 cdb[ATAPI_CDB_LEN]; - - DPRINTK("ATAPI request sense\n"); - - ata_tf_init(dev, &tf); - - /* FIXME: is this needed? */ - memset(sense_buf, 0, SCSI_SENSE_BUFFERSIZE); - - /* XXX: why tf_read here? */ - ap->ops->tf_read(ap, &tf); - - /* fill these in, for the case where they are -not- overwritten */ - sense_buf[0] = 0x70; - sense_buf[2] = tf.feature >> 4; - - memset(cdb, 0, ATAPI_CDB_LEN); - cdb[0] = REQUEST_SENSE; - cdb[4] = SCSI_SENSE_BUFFERSIZE; - - tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - tf.command = ATA_CMD_PACKET; - - /* is it pointless to prefer PIO for "safety reasons"? */ - if (ap->flags & ATA_FLAG_PIO_DMA) { - tf.protocol = ATA_PROT_ATAPI_DMA; - tf.feature |= ATAPI_PKT_DMA; - } else { - tf.protocol = ATA_PROT_ATAPI; - tf.lbam = (8 * 1024) & 0xff; - tf.lbah = (8 * 1024) >> 8; - } - - return ata_exec_internal(dev, &tf, cdb, DMA_FROM_DEVICE, - sense_buf, SCSI_SENSE_BUFFERSIZE); -} - -/** - * ata_eh_analyze_serror - analyze SError for a failed port - * @ap: ATA port to analyze SError for - * - * Analyze SError if available and further determine cause of - * failure. - * - * LOCKING: - * None. - */ -static void ata_eh_analyze_serror(struct ata_port *ap) -{ - struct ata_eh_context *ehc = &ap->eh_context; - u32 serror = ehc->i.serror; - unsigned int err_mask = 0, action = 0; - - if (serror & SERR_PERSISTENT) { - err_mask |= AC_ERR_ATA_BUS; - action |= ATA_EH_HARDRESET; - } - if (serror & - (SERR_DATA_RECOVERED | SERR_COMM_RECOVERED | SERR_DATA)) { - err_mask |= AC_ERR_ATA_BUS; - action |= ATA_EH_SOFTRESET; - } - if (serror & SERR_PROTOCOL) { - err_mask |= AC_ERR_HSM; - action |= ATA_EH_SOFTRESET; - } - if (serror & SERR_INTERNAL) { - err_mask |= AC_ERR_SYSTEM; - action |= ATA_EH_SOFTRESET; - } - if (serror & (SERR_PHYRDY_CHG | SERR_DEV_XCHG)) - ata_ehi_hotplugged(&ehc->i); - - ehc->i.err_mask |= err_mask; - ehc->i.action |= action; -} - -/** - * ata_eh_analyze_ncq_error - analyze NCQ error - * @ap: ATA port to analyze NCQ error for - * - * Read log page 10h, determine the offending qc and acquire - * error status TF. For NCQ device errors, all LLDDs have to do - * is setting AC_ERR_DEV in ehi->err_mask. This function takes - * care of the rest. - * - * LOCKING: - * Kernel thread context (may sleep). - */ -static void ata_eh_analyze_ncq_error(struct ata_port *ap) -{ - struct ata_eh_context *ehc = &ap->eh_context; - struct ata_device *dev = ap->device; - struct ata_queued_cmd *qc; - struct ata_taskfile tf; - int tag, rc; - - /* if frozen, we can't do much */ - if (ap->pflags & ATA_PFLAG_FROZEN) - return; - - /* is it NCQ device error? */ - if (!ap->sactive || !(ehc->i.err_mask & AC_ERR_DEV)) - return; - - /* has LLDD analyzed already? */ - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - qc = __ata_qc_from_tag(ap, tag); - - if (!(qc->flags & ATA_QCFLAG_FAILED)) - continue; - - if (qc->err_mask) - return; - } - - /* okay, this error is ours */ - rc = ata_eh_read_log_10h(dev, &tag, &tf); - if (rc) { - ata_port_printk(ap, KERN_ERR, "failed to read log page 10h " - "(errno=%d)\n", rc); - return; - } - - if (!(ap->sactive & (1 << tag))) { - ata_port_printk(ap, KERN_ERR, "log page 10h reported " - "inactive tag %d\n", tag); - return; - } - - /* we've got the perpetrator, condemn it */ - qc = __ata_qc_from_tag(ap, tag); - memcpy(&qc->result_tf, &tf, sizeof(tf)); - qc->err_mask |= AC_ERR_DEV; - ehc->i.err_mask &= ~AC_ERR_DEV; -} - -/** - * ata_eh_analyze_tf - analyze taskfile of a failed qc - * @qc: qc to analyze - * @tf: Taskfile registers to analyze - * - * Analyze taskfile of @qc and further determine cause of - * failure. This function also requests ATAPI sense data if - * avaliable. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * Determined recovery action - */ -static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc, - const struct ata_taskfile *tf) -{ - unsigned int tmp, action = 0; - u8 stat = tf->command, err = tf->feature; - - if ((stat & (ATA_BUSY | ATA_DRQ | ATA_DRDY)) != ATA_DRDY) { - qc->err_mask |= AC_ERR_HSM; - return ATA_EH_SOFTRESET; - } - - if (!(qc->err_mask & AC_ERR_DEV)) - return 0; - - switch (qc->dev->class) { - case ATA_DEV_ATA: - if (err & ATA_ICRC) - qc->err_mask |= AC_ERR_ATA_BUS; - if (err & ATA_UNC) - qc->err_mask |= AC_ERR_MEDIA; - if (err & ATA_IDNF) - qc->err_mask |= AC_ERR_INVALID; - break; - - case ATA_DEV_ATAPI: - tmp = atapi_eh_request_sense(qc->dev, - qc->scsicmd->sense_buffer); - if (!tmp) { - /* ATA_QCFLAG_SENSE_VALID is used to tell - * atapi_qc_complete() that sense data is - * already valid. - * - * TODO: interpret sense data and set - * appropriate err_mask. - */ - qc->flags |= ATA_QCFLAG_SENSE_VALID; - } else - qc->err_mask |= tmp; - } - - if (qc->err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT | AC_ERR_ATA_BUS)) - action |= ATA_EH_SOFTRESET; - - return action; -} - -static int ata_eh_categorize_ering_entry(struct ata_ering_entry *ent) -{ - if (ent->err_mask & (AC_ERR_ATA_BUS | AC_ERR_TIMEOUT)) - return 1; - - if (ent->is_io) { - if (ent->err_mask & AC_ERR_HSM) - return 1; - if ((ent->err_mask & - (AC_ERR_DEV|AC_ERR_MEDIA|AC_ERR_INVALID)) == AC_ERR_DEV) - return 2; - } - - return 0; -} - -struct speed_down_needed_arg { - u64 since; - int nr_errors[3]; -}; - -static int speed_down_needed_cb(struct ata_ering_entry *ent, void *void_arg) -{ - struct speed_down_needed_arg *arg = void_arg; - - if (ent->timestamp < arg->since) - return -1; - - arg->nr_errors[ata_eh_categorize_ering_entry(ent)]++; - return 0; -} - -/** - * ata_eh_speed_down_needed - Determine wheter speed down is necessary - * @dev: Device of interest - * - * This function examines error ring of @dev and determines - * whether speed down is necessary. Speed down is necessary if - * there have been more than 3 of Cat-1 errors or 10 of Cat-2 - * errors during last 15 minutes. - * - * Cat-1 errors are ATA_BUS, TIMEOUT for any command and HSM - * violation for known supported commands. - * - * Cat-2 errors are unclassified DEV error for known supported - * command. - * - * LOCKING: - * Inherited from caller. - * - * RETURNS: - * 1 if speed down is necessary, 0 otherwise - */ -static int ata_eh_speed_down_needed(struct ata_device *dev) -{ - const u64 interval = 15LLU * 60 * HZ; - static const int err_limits[3] = { -1, 3, 10 }; - struct speed_down_needed_arg arg; - struct ata_ering_entry *ent; - int err_cat; - u64 j64; - - ent = ata_ering_top(&dev->ering); - if (!ent) - return 0; - - err_cat = ata_eh_categorize_ering_entry(ent); - if (err_cat == 0) - return 0; - - memset(&arg, 0, sizeof(arg)); - - j64 = get_jiffies_64(); - if (j64 >= interval) - arg.since = j64 - interval; - else - arg.since = 0; - - ata_ering_map(&dev->ering, speed_down_needed_cb, &arg); - - return arg.nr_errors[err_cat] > err_limits[err_cat]; -} - -/** - * ata_eh_speed_down - record error and speed down if necessary - * @dev: Failed device - * @is_io: Did the device fail during normal IO? - * @err_mask: err_mask of the error - * - * Record error and examine error history to determine whether - * adjusting transmission speed is necessary. It also sets - * transmission limits appropriately if such adjustment is - * necessary. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0 on success, -errno otherwise - */ -static int ata_eh_speed_down(struct ata_device *dev, int is_io, - unsigned int err_mask) -{ - if (!err_mask) - return 0; - - /* record error and determine whether speed down is necessary */ - ata_ering_record(&dev->ering, is_io, err_mask); - - if (!ata_eh_speed_down_needed(dev)) - return 0; - - /* speed down SATA link speed if possible */ - if (sata_down_spd_limit(dev->ap) == 0) - return ATA_EH_HARDRESET; - - /* lower transfer mode */ - if (ata_down_xfermask_limit(dev, 0) == 0) - return ATA_EH_SOFTRESET; - - ata_dev_printk(dev, KERN_ERR, - "speed down requested but no transfer mode left\n"); - return 0; -} - -/** - * ata_eh_autopsy - analyze error and determine recovery action - * @ap: ATA port to perform autopsy on - * - * Analyze why @ap failed and determine which recovery action is - * needed. This function also sets more detailed AC_ERR_* values - * and fills sense data for ATAPI CHECK SENSE. - * - * LOCKING: - * Kernel thread context (may sleep). - */ -static void ata_eh_autopsy(struct ata_port *ap) -{ - struct ata_eh_context *ehc = &ap->eh_context; - unsigned int all_err_mask = 0; - int tag, is_io = 0; - u32 serror; - int rc; - - DPRINTK("ENTER\n"); - - if (ehc->i.flags & ATA_EHI_NO_AUTOPSY) - return; - - /* obtain and analyze SError */ - rc = sata_scr_read(ap, SCR_ERROR, &serror); - if (rc == 0) { - ehc->i.serror |= serror; - ata_eh_analyze_serror(ap); - } else if (rc != -EOPNOTSUPP) - ehc->i.action |= ATA_EH_HARDRESET; - - /* analyze NCQ failure */ - ata_eh_analyze_ncq_error(ap); - - /* any real error trumps AC_ERR_OTHER */ - if (ehc->i.err_mask & ~AC_ERR_OTHER) - ehc->i.err_mask &= ~AC_ERR_OTHER; - - all_err_mask |= ehc->i.err_mask; - - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); - - if (!(qc->flags & ATA_QCFLAG_FAILED)) - continue; - - /* inherit upper level err_mask */ - qc->err_mask |= ehc->i.err_mask; - - /* analyze TF */ - ehc->i.action |= ata_eh_analyze_tf(qc, &qc->result_tf); - - /* DEV errors are probably spurious in case of ATA_BUS error */ - if (qc->err_mask & AC_ERR_ATA_BUS) - qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_MEDIA | - AC_ERR_INVALID); - - /* any real error trumps unknown error */ - if (qc->err_mask & ~AC_ERR_OTHER) - qc->err_mask &= ~AC_ERR_OTHER; - - /* SENSE_VALID trumps dev/unknown error and revalidation */ - if (qc->flags & ATA_QCFLAG_SENSE_VALID) { - qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_OTHER); - ehc->i.action &= ~ATA_EH_REVALIDATE; - } - - /* accumulate error info */ - ehc->i.dev = qc->dev; - all_err_mask |= qc->err_mask; - if (qc->flags & ATA_QCFLAG_IO) - is_io = 1; - } - - /* enforce default EH actions */ - if (ap->pflags & ATA_PFLAG_FROZEN || - all_err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT)) - ehc->i.action |= ATA_EH_SOFTRESET; - else if (all_err_mask) - ehc->i.action |= ATA_EH_REVALIDATE; - - /* if we have offending qcs and the associated failed device */ - if (ehc->i.dev) { - /* speed down */ - ehc->i.action |= ata_eh_speed_down(ehc->i.dev, is_io, - all_err_mask); - - /* perform per-dev EH action only on the offending device */ - ehc->i.dev_action[ehc->i.dev->devno] |= - ehc->i.action & ATA_EH_PERDEV_MASK; - ehc->i.action &= ~ATA_EH_PERDEV_MASK; - } - - DPRINTK("EXIT\n"); -} - -/** - * ata_eh_report - report error handling to user - * @ap: ATA port EH is going on - * - * Report EH to user. - * - * LOCKING: - * None. - */ -static void ata_eh_report(struct ata_port *ap) -{ - struct ata_eh_context *ehc = &ap->eh_context; - const char *frozen, *desc; - int tag, nr_failed = 0; - - desc = NULL; - if (ehc->i.desc[0] != '\0') - desc = ehc->i.desc; - - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); - - if (!(qc->flags & ATA_QCFLAG_FAILED)) - continue; - if (qc->flags & ATA_QCFLAG_SENSE_VALID && !qc->err_mask) - continue; - - nr_failed++; - } - - if (!nr_failed && !ehc->i.err_mask) - return; - - frozen = ""; - if (ap->pflags & ATA_PFLAG_FROZEN) - frozen = " frozen"; - - if (ehc->i.dev) { - ata_dev_printk(ehc->i.dev, KERN_ERR, "exception Emask 0x%x " - "SAct 0x%x SErr 0x%x action 0x%x%s\n", - ehc->i.err_mask, ap->sactive, ehc->i.serror, - ehc->i.action, frozen); - if (desc) - ata_dev_printk(ehc->i.dev, KERN_ERR, "(%s)\n", desc); - } else { - ata_port_printk(ap, KERN_ERR, "exception Emask 0x%x " - "SAct 0x%x SErr 0x%x action 0x%x%s\n", - ehc->i.err_mask, ap->sactive, ehc->i.serror, - ehc->i.action, frozen); - if (desc) - ata_port_printk(ap, KERN_ERR, "(%s)\n", desc); - } - - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); - - if (!(qc->flags & ATA_QCFLAG_FAILED) || !qc->err_mask) - continue; - - ata_dev_printk(qc->dev, KERN_ERR, "tag %d cmd 0x%x " - "Emask 0x%x stat 0x%x err 0x%x (%s)\n", - qc->tag, qc->tf.command, qc->err_mask, - qc->result_tf.command, qc->result_tf.feature, - ata_err_string(qc->err_mask)); - } -} - -static int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset, - unsigned int *classes) -{ - int i, rc; - - for (i = 0; i < ATA_MAX_DEVICES; i++) - classes[i] = ATA_DEV_UNKNOWN; - - rc = reset(ap, classes); - if (rc) - return rc; - - /* If any class isn't ATA_DEV_UNKNOWN, consider classification - * is complete and convert all ATA_DEV_UNKNOWN to - * ATA_DEV_NONE. - */ - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (classes[i] != ATA_DEV_UNKNOWN) - break; - - if (i < ATA_MAX_DEVICES) - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (classes[i] == ATA_DEV_UNKNOWN) - classes[i] = ATA_DEV_NONE; - - return 0; -} - -static int ata_eh_followup_srst_needed(int rc, int classify, - const unsigned int *classes) -{ - if (rc == -EAGAIN) - return 1; - if (rc != 0) - return 0; - if (classify && classes[0] == ATA_DEV_UNKNOWN) - return 1; - return 0; -} - -static int ata_eh_reset(struct ata_port *ap, int classify, - ata_prereset_fn_t prereset, ata_reset_fn_t softreset, - ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) -{ - struct ata_eh_context *ehc = &ap->eh_context; - unsigned int *classes = ehc->classes; - int tries = ATA_EH_RESET_TRIES; - int verbose = !(ehc->i.flags & ATA_EHI_QUIET); - unsigned int action; - ata_reset_fn_t reset; - int i, did_followup_srst, rc; - - /* about to reset */ - ata_eh_about_to_do(ap, NULL, ehc->i.action & ATA_EH_RESET_MASK); - - /* Determine which reset to use and record in ehc->i.action. - * prereset() may examine and modify it. - */ - action = ehc->i.action; - ehc->i.action &= ~ATA_EH_RESET_MASK; - if (softreset && (!hardreset || (!sata_set_spd_needed(ap) && - !(action & ATA_EH_HARDRESET)))) - ehc->i.action |= ATA_EH_SOFTRESET; - else - ehc->i.action |= ATA_EH_HARDRESET; - - if (prereset) { - rc = prereset(ap); - if (rc) { - ata_port_printk(ap, KERN_ERR, - "prereset failed (errno=%d)\n", rc); - return rc; - } - } - - /* prereset() might have modified ehc->i.action */ - if (ehc->i.action & ATA_EH_HARDRESET) - reset = hardreset; - else if (ehc->i.action & ATA_EH_SOFTRESET) - reset = softreset; - else { - /* prereset told us not to reset, bang classes and return */ - for (i = 0; i < ATA_MAX_DEVICES; i++) - classes[i] = ATA_DEV_NONE; - return 0; - } - - /* did prereset() screw up? if so, fix up to avoid oopsing */ - if (!reset) { - ata_port_printk(ap, KERN_ERR, "BUG: prereset() requested " - "invalid reset type\n"); - if (softreset) - reset = softreset; - else - reset = hardreset; - } - - retry: - /* shut up during boot probing */ - if (verbose) - ata_port_printk(ap, KERN_INFO, "%s resetting port\n", - reset == softreset ? "soft" : "hard"); - - /* mark that this EH session started with reset */ - ehc->i.flags |= ATA_EHI_DID_RESET; - - rc = ata_do_reset(ap, reset, classes); - - did_followup_srst = 0; - if (reset == hardreset && - ata_eh_followup_srst_needed(rc, classify, classes)) { - /* okay, let's do follow-up softreset */ - did_followup_srst = 1; - reset = softreset; - - if (!reset) { - ata_port_printk(ap, KERN_ERR, - "follow-up softreset required " - "but no softreset avaliable\n"); - return -EINVAL; - } - - ata_eh_about_to_do(ap, NULL, ATA_EH_RESET_MASK); - rc = ata_do_reset(ap, reset, classes); - - if (rc == 0 && classify && - classes[0] == ATA_DEV_UNKNOWN) { - ata_port_printk(ap, KERN_ERR, - "classification failed\n"); - return -EINVAL; - } - } - - if (rc && --tries) { - const char *type; - - if (reset == softreset) { - if (did_followup_srst) - type = "follow-up soft"; - else - type = "soft"; - } else - type = "hard"; - - ata_port_printk(ap, KERN_WARNING, - "%sreset failed, retrying in 5 secs\n", type); - ssleep(5); - - if (reset == hardreset) - sata_down_spd_limit(ap); - if (hardreset) - reset = hardreset; - goto retry; - } - - if (rc == 0) { - /* After the reset, the device state is PIO 0 and the - * controller state is undefined. Record the mode. - */ - for (i = 0; i < ATA_MAX_DEVICES; i++) - ap->device[i].pio_mode = XFER_PIO_0; - - if (postreset) - postreset(ap, classes); - - /* reset successful, schedule revalidation */ - ata_eh_done(ap, NULL, ehc->i.action & ATA_EH_RESET_MASK); - ehc->i.action |= ATA_EH_REVALIDATE; - } - - return rc; -} - -static int ata_eh_revalidate_and_attach(struct ata_port *ap, - struct ata_device **r_failed_dev) -{ - struct ata_eh_context *ehc = &ap->eh_context; - struct ata_device *dev; - unsigned long flags; - int i, rc = 0; - - DPRINTK("ENTER\n"); - - for (i = 0; i < ATA_MAX_DEVICES; i++) { - unsigned int action; - - dev = &ap->device[i]; - action = ata_eh_dev_action(dev); - - if (action & ATA_EH_REVALIDATE && ata_dev_ready(dev)) { - if (ata_port_offline(ap)) { - rc = -EIO; - break; - } - - ata_eh_about_to_do(ap, dev, ATA_EH_REVALIDATE); - rc = ata_dev_revalidate(dev, - ehc->i.flags & ATA_EHI_DID_RESET); - if (rc) - break; - - ata_eh_done(ap, dev, ATA_EH_REVALIDATE); - - /* schedule the scsi_rescan_device() here */ - queue_work(ata_aux_wq, &(ap->scsi_rescan_task)); - } else if (dev->class == ATA_DEV_UNKNOWN && - ehc->tries[dev->devno] && - ata_class_enabled(ehc->classes[dev->devno])) { - dev->class = ehc->classes[dev->devno]; - - rc = ata_dev_read_id(dev, &dev->class, 1, dev->id); - if (rc == 0) - rc = ata_dev_configure(dev, 1); - - if (rc) { - dev->class = ATA_DEV_UNKNOWN; - break; - } - - spin_lock_irqsave(ap->lock, flags); - ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG; - spin_unlock_irqrestore(ap->lock, flags); - } - } - - if (rc) - *r_failed_dev = dev; - - DPRINTK("EXIT\n"); - return rc; -} - -/** - * ata_eh_suspend - handle suspend EH action - * @ap: target host port - * @r_failed_dev: result parameter to indicate failing device - * - * Handle suspend EH action. Disk devices are spinned down and - * other types of devices are just marked suspended. Once - * suspended, no EH action to the device is allowed until it is - * resumed. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0 on success, -errno otherwise - */ -static int ata_eh_suspend(struct ata_port *ap, struct ata_device **r_failed_dev) -{ - struct ata_device *dev; - int i, rc = 0; - - DPRINTK("ENTER\n"); - - for (i = 0; i < ATA_MAX_DEVICES; i++) { - unsigned long flags; - unsigned int action, err_mask; - - dev = &ap->device[i]; - action = ata_eh_dev_action(dev); - - if (!ata_dev_enabled(dev) || !(action & ATA_EH_SUSPEND)) - continue; - - WARN_ON(dev->flags & ATA_DFLAG_SUSPENDED); - - ata_eh_about_to_do(ap, dev, ATA_EH_SUSPEND); - - if (dev->class == ATA_DEV_ATA && !(action & ATA_EH_PM_FREEZE)) { - /* flush cache */ - rc = ata_flush_cache(dev); - if (rc) - break; - - /* spin down */ - err_mask = ata_do_simple_cmd(dev, ATA_CMD_STANDBYNOW1); - if (err_mask) { - ata_dev_printk(dev, KERN_ERR, "failed to " - "spin down (err_mask=0x%x)\n", - err_mask); - rc = -EIO; - break; - } - } - - spin_lock_irqsave(ap->lock, flags); - dev->flags |= ATA_DFLAG_SUSPENDED; - spin_unlock_irqrestore(ap->lock, flags); - - ata_eh_done(ap, dev, ATA_EH_SUSPEND); - } - - if (rc) - *r_failed_dev = dev; - - DPRINTK("EXIT\n"); - return 0; -} - -/** - * ata_eh_prep_resume - prep for resume EH action - * @ap: target host port - * - * Clear SUSPENDED in preparation for scheduled resume actions. - * This allows other parts of EH to access the devices being - * resumed. - * - * LOCKING: - * Kernel thread context (may sleep). - */ -static void ata_eh_prep_resume(struct ata_port *ap) -{ - struct ata_device *dev; - unsigned long flags; - int i; - - DPRINTK("ENTER\n"); - - for (i = 0; i < ATA_MAX_DEVICES; i++) { - unsigned int action; - - dev = &ap->device[i]; - action = ata_eh_dev_action(dev); - - if (!ata_dev_enabled(dev) || !(action & ATA_EH_RESUME)) - continue; - - spin_lock_irqsave(ap->lock, flags); - dev->flags &= ~ATA_DFLAG_SUSPENDED; - spin_unlock_irqrestore(ap->lock, flags); - } - - DPRINTK("EXIT\n"); -} - -/** - * ata_eh_resume - handle resume EH action - * @ap: target host port - * @r_failed_dev: result parameter to indicate failing device - * - * Handle resume EH action. Target devices are already reset and - * revalidated. Spinning up is the only operation left. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0 on success, -errno otherwise - */ -static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev) -{ - struct ata_device *dev; - int i, rc = 0; - - DPRINTK("ENTER\n"); - - for (i = 0; i < ATA_MAX_DEVICES; i++) { - unsigned int action, err_mask; - - dev = &ap->device[i]; - action = ata_eh_dev_action(dev); - - if (!ata_dev_enabled(dev) || !(action & ATA_EH_RESUME)) - continue; - - ata_eh_about_to_do(ap, dev, ATA_EH_RESUME); - - if (dev->class == ATA_DEV_ATA && !(action & ATA_EH_PM_FREEZE)) { - err_mask = ata_do_simple_cmd(dev, - ATA_CMD_IDLEIMMEDIATE); - if (err_mask) { - ata_dev_printk(dev, KERN_ERR, "failed to " - "spin up (err_mask=0x%x)\n", - err_mask); - rc = -EIO; - break; - } - } - - ata_eh_done(ap, dev, ATA_EH_RESUME); - } - - if (rc) - *r_failed_dev = dev; - - DPRINTK("EXIT\n"); - return 0; -} - -static int ata_port_nr_enabled(struct ata_port *ap) -{ - int i, cnt = 0; - - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (ata_dev_enabled(&ap->device[i])) - cnt++; - return cnt; -} - -static int ata_port_nr_vacant(struct ata_port *ap) -{ - int i, cnt = 0; - - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (ap->device[i].class == ATA_DEV_UNKNOWN) - cnt++; - return cnt; -} - -static int ata_eh_skip_recovery(struct ata_port *ap) -{ - struct ata_eh_context *ehc = &ap->eh_context; - int i; - - /* skip if all possible devices are suspended */ - for (i = 0; i < ata_port_max_devices(ap); i++) { - struct ata_device *dev = &ap->device[i]; - - if (!(dev->flags & ATA_DFLAG_SUSPENDED)) - break; - } - - if (i == ata_port_max_devices(ap)) - return 1; - - /* thaw frozen port, resume link and recover failed devices */ - if ((ap->pflags & ATA_PFLAG_FROZEN) || - (ehc->i.flags & ATA_EHI_RESUME_LINK) || ata_port_nr_enabled(ap)) - return 0; - - /* skip if class codes for all vacant slots are ATA_DEV_NONE */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; - - if (dev->class == ATA_DEV_UNKNOWN && - ehc->classes[dev->devno] != ATA_DEV_NONE) - return 0; - } - - return 1; -} - -/** - * ata_eh_recover - recover host port after error - * @ap: host port to recover - * @prereset: prereset method (can be NULL) - * @softreset: softreset method (can be NULL) - * @hardreset: hardreset method (can be NULL) - * @postreset: postreset method (can be NULL) - * - * This is the alpha and omega, eum and yang, heart and soul of - * libata exception handling. On entry, actions required to - * recover the port and hotplug requests are recorded in - * eh_context. This function executes all the operations with - * appropriate retrials and fallbacks to resurrect failed - * devices, detach goners and greet newcomers. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0 on success, -errno on failure. - */ -static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, - ata_reset_fn_t softreset, ata_reset_fn_t hardreset, - ata_postreset_fn_t postreset) -{ - struct ata_eh_context *ehc = &ap->eh_context; - struct ata_device *dev; - int down_xfermask, i, rc; - - DPRINTK("ENTER\n"); - - /* prep for recovery */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; - - ehc->tries[dev->devno] = ATA_EH_DEV_TRIES; - - /* process hotplug request */ - if (dev->flags & ATA_DFLAG_DETACH) - ata_eh_detach_dev(dev); - - if (!ata_dev_enabled(dev) && - ((ehc->i.probe_mask & (1 << dev->devno)) && - !(ehc->did_probe_mask & (1 << dev->devno)))) { - ata_eh_detach_dev(dev); - ata_dev_init(dev); - ehc->did_probe_mask |= (1 << dev->devno); - ehc->i.action |= ATA_EH_SOFTRESET; - } - } - - retry: - down_xfermask = 0; - rc = 0; - - /* if UNLOADING, finish immediately */ - if (ap->pflags & ATA_PFLAG_UNLOADING) - goto out; - - /* prep for resume */ - ata_eh_prep_resume(ap); - - /* skip EH if possible. */ - if (ata_eh_skip_recovery(ap)) - ehc->i.action = 0; - - for (i = 0; i < ATA_MAX_DEVICES; i++) - ehc->classes[i] = ATA_DEV_UNKNOWN; - - /* reset */ - if (ehc->i.action & ATA_EH_RESET_MASK) { - ata_eh_freeze_port(ap); - - rc = ata_eh_reset(ap, ata_port_nr_vacant(ap), prereset, - softreset, hardreset, postreset); - if (rc) { - ata_port_printk(ap, KERN_ERR, - "reset failed, giving up\n"); - goto out; - } - - ata_eh_thaw_port(ap); - } - - /* revalidate existing devices and attach new ones */ - rc = ata_eh_revalidate_and_attach(ap, &dev); - if (rc) - goto dev_fail; - - /* resume devices */ - rc = ata_eh_resume(ap, &dev); - if (rc) - goto dev_fail; - - /* configure transfer mode if the port has been reset */ - if (ehc->i.flags & ATA_EHI_DID_RESET) { - rc = ata_set_mode(ap, &dev); - if (rc) { - down_xfermask = 1; - goto dev_fail; - } - } - - /* suspend devices */ - rc = ata_eh_suspend(ap, &dev); - if (rc) - goto dev_fail; - - goto out; - - dev_fail: - switch (rc) { - case -ENODEV: - /* device missing, schedule probing */ - ehc->i.probe_mask |= (1 << dev->devno); - case -EINVAL: - ehc->tries[dev->devno] = 0; - break; - case -EIO: - sata_down_spd_limit(ap); - default: - ehc->tries[dev->devno]--; - if (down_xfermask && - ata_down_xfermask_limit(dev, ehc->tries[dev->devno] == 1)) - ehc->tries[dev->devno] = 0; - } - - if (ata_dev_enabled(dev) && !ehc->tries[dev->devno]) { - /* disable device if it has used up all its chances */ - ata_dev_disable(dev); - - /* detach if offline */ - if (ata_port_offline(ap)) - ata_eh_detach_dev(dev); - - /* probe if requested */ - if ((ehc->i.probe_mask & (1 << dev->devno)) && - !(ehc->did_probe_mask & (1 << dev->devno))) { - ata_eh_detach_dev(dev); - ata_dev_init(dev); - - ehc->tries[dev->devno] = ATA_EH_DEV_TRIES; - ehc->did_probe_mask |= (1 << dev->devno); - ehc->i.action |= ATA_EH_SOFTRESET; - } - } else { - /* soft didn't work? be haaaaard */ - if (ehc->i.flags & ATA_EHI_DID_RESET) - ehc->i.action |= ATA_EH_HARDRESET; - else - ehc->i.action |= ATA_EH_SOFTRESET; - } - - if (ata_port_nr_enabled(ap)) { - ata_port_printk(ap, KERN_WARNING, "failed to recover some " - "devices, retrying in 5 secs\n"); - ssleep(5); - } else { - /* no device left, repeat fast */ - msleep(500); - } - - goto retry; - - out: - if (rc) { - for (i = 0; i < ATA_MAX_DEVICES; i++) - ata_dev_disable(&ap->device[i]); - } - - DPRINTK("EXIT, rc=%d\n", rc); - return rc; -} - -/** - * ata_eh_finish - finish up EH - * @ap: host port to finish EH for - * - * Recovery is complete. Clean up EH states and retry or finish - * failed qcs. - * - * LOCKING: - * None. - */ -static void ata_eh_finish(struct ata_port *ap) -{ - int tag; - - /* retry or finish qcs */ - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); - - if (!(qc->flags & ATA_QCFLAG_FAILED)) - continue; - - if (qc->err_mask) { - /* FIXME: Once EH migration is complete, - * generate sense data in this function, - * considering both err_mask and tf. - */ - if (qc->err_mask & AC_ERR_INVALID) - ata_eh_qc_complete(qc); - else - ata_eh_qc_retry(qc); - } else { - if (qc->flags & ATA_QCFLAG_SENSE_VALID) { - ata_eh_qc_complete(qc); - } else { - /* feed zero TF to sense generation */ - memset(&qc->result_tf, 0, sizeof(qc->result_tf)); - ata_eh_qc_retry(qc); - } - } - } -} - -/** - * ata_do_eh - do standard error handling - * @ap: host port to handle error for - * @prereset: prereset method (can be NULL) - * @softreset: softreset method (can be NULL) - * @hardreset: hardreset method (can be NULL) - * @postreset: postreset method (can be NULL) - * - * Perform standard error handling sequence. - * - * LOCKING: - * Kernel thread context (may sleep). - */ -void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, - ata_reset_fn_t softreset, ata_reset_fn_t hardreset, - ata_postreset_fn_t postreset) -{ - ata_eh_autopsy(ap); - ata_eh_report(ap); - ata_eh_recover(ap, prereset, softreset, hardreset, postreset); - ata_eh_finish(ap); -} - -/** - * ata_eh_handle_port_suspend - perform port suspend operation - * @ap: port to suspend - * - * Suspend @ap. - * - * LOCKING: - * Kernel thread context (may sleep). - */ -static void ata_eh_handle_port_suspend(struct ata_port *ap) -{ - unsigned long flags; - int rc = 0; - - /* are we suspending? */ - spin_lock_irqsave(ap->lock, flags); - if (!(ap->pflags & ATA_PFLAG_PM_PENDING) || - ap->pm_mesg.event == PM_EVENT_ON) { - spin_unlock_irqrestore(ap->lock, flags); - return; - } - spin_unlock_irqrestore(ap->lock, flags); - - WARN_ON(ap->pflags & ATA_PFLAG_SUSPENDED); - - /* suspend */ - ata_eh_freeze_port(ap); - - if (ap->ops->port_suspend) - rc = ap->ops->port_suspend(ap, ap->pm_mesg); - - /* report result */ - spin_lock_irqsave(ap->lock, flags); - - ap->pflags &= ~ATA_PFLAG_PM_PENDING; - if (rc == 0) - ap->pflags |= ATA_PFLAG_SUSPENDED; - else - ata_port_schedule_eh(ap); - - if (ap->pm_result) { - *ap->pm_result = rc; - ap->pm_result = NULL; - } - - spin_unlock_irqrestore(ap->lock, flags); - - return; -} - -/** - * ata_eh_handle_port_resume - perform port resume operation - * @ap: port to resume - * - * Resume @ap. - * - * This function also waits upto one second until all devices - * hanging off this port requests resume EH action. This is to - * prevent invoking EH and thus reset multiple times on resume. - * - * On DPM resume, where some of devices might not be resumed - * together, this may delay port resume upto one second, but such - * DPM resumes are rare and 1 sec delay isn't too bad. - * - * LOCKING: - * Kernel thread context (may sleep). - */ -static void ata_eh_handle_port_resume(struct ata_port *ap) -{ - unsigned long timeout; - unsigned long flags; - int i, rc = 0; - - /* are we resuming? */ - spin_lock_irqsave(ap->lock, flags); - if (!(ap->pflags & ATA_PFLAG_PM_PENDING) || - ap->pm_mesg.event != PM_EVENT_ON) { - spin_unlock_irqrestore(ap->lock, flags); - return; - } - spin_unlock_irqrestore(ap->lock, flags); - - /* spurious? */ - if (!(ap->pflags & ATA_PFLAG_SUSPENDED)) - goto done; - - if (ap->ops->port_resume) - rc = ap->ops->port_resume(ap); - - /* give devices time to request EH */ - timeout = jiffies + HZ; /* 1s max */ - while (1) { - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; - unsigned int action = ata_eh_dev_action(dev); - - if ((dev->flags & ATA_DFLAG_SUSPENDED) && - !(action & ATA_EH_RESUME)) - break; - } - - if (i == ATA_MAX_DEVICES || time_after(jiffies, timeout)) - break; - msleep(10); - } - - done: - spin_lock_irqsave(ap->lock, flags); - ap->pflags &= ~(ATA_PFLAG_PM_PENDING | ATA_PFLAG_SUSPENDED); - if (ap->pm_result) { - *ap->pm_result = rc; - ap->pm_result = NULL; - } - spin_unlock_irqrestore(ap->lock, flags); -} diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c deleted file mode 100644 index d168e341366..00000000000 --- a/drivers/scsi/libata-scsi.c +++ /dev/null @@ -1,3322 +0,0 @@ -/* - * libata-scsi.c - helper library for ATA - * - * Maintained by: Jeff Garzik - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * Copyright 2003-2004 Red Hat, Inc. All rights reserved. - * Copyright 2003-2004 Jeff Garzik - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Hardware documentation available from - * - http://www.t10.org/ - * - http://www.t13.org/ - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "libata.h" - -#define SECTOR_SIZE 512 - -typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd); - -static struct ata_device * __ata_scsi_find_dev(struct ata_port *ap, - const struct scsi_device *scsidev); -static struct ata_device * ata_scsi_find_dev(struct ata_port *ap, - const struct scsi_device *scsidev); -static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, - unsigned int id, unsigned int lun); - - -#define RW_RECOVERY_MPAGE 0x1 -#define RW_RECOVERY_MPAGE_LEN 12 -#define CACHE_MPAGE 0x8 -#define CACHE_MPAGE_LEN 20 -#define CONTROL_MPAGE 0xa -#define CONTROL_MPAGE_LEN 12 -#define ALL_MPAGES 0x3f -#define ALL_SUB_MPAGES 0xff - - -static const u8 def_rw_recovery_mpage[] = { - RW_RECOVERY_MPAGE, - RW_RECOVERY_MPAGE_LEN - 2, - (1 << 7) | /* AWRE, sat-r06 say it shall be 0 */ - (1 << 6), /* ARRE (auto read reallocation) */ - 0, /* read retry count */ - 0, 0, 0, 0, - 0, /* write retry count */ - 0, 0, 0 -}; - -static const u8 def_cache_mpage[CACHE_MPAGE_LEN] = { - CACHE_MPAGE, - CACHE_MPAGE_LEN - 2, - 0, /* contains WCE, needs to be 0 for logic */ - 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, /* contains DRA, needs to be 0 for logic */ - 0, 0, 0, 0, 0, 0, 0 -}; - -static const u8 def_control_mpage[CONTROL_MPAGE_LEN] = { - CONTROL_MPAGE, - CONTROL_MPAGE_LEN - 2, - 2, /* DSENSE=0, GLTSD=1 */ - 0, /* [QAM+QERR may be 1, see 05-359r1] */ - 0, 0, 0, 0, 0xff, 0xff, - 0, 30 /* extended self test time, see 05-359r1 */ -}; - -/* - * libata transport template. libata doesn't do real transport stuff. - * It just needs the eh_timed_out hook. - */ -struct scsi_transport_template ata_scsi_transport_template = { - .eh_strategy_handler = ata_scsi_error, - .eh_timed_out = ata_scsi_timed_out, - .user_scan = ata_scsi_user_scan, -}; - - -static void ata_scsi_invalid_field(struct scsi_cmnd *cmd, - void (*done)(struct scsi_cmnd *)) -{ - ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x24, 0x0); - /* "Invalid field in cbd" */ - done(cmd); -} - -/** - * ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd. - * @sdev: SCSI device for which BIOS geometry is to be determined - * @bdev: block device associated with @sdev - * @capacity: capacity of SCSI device - * @geom: location to which geometry will be output - * - * Generic bios head/sector/cylinder calculator - * used by sd. Most BIOSes nowadays expect a XXX/255/16 (CHS) - * mapping. Some situations may arise where the disk is not - * bootable if this is not used. - * - * LOCKING: - * Defined by the SCSI layer. We don't really care. - * - * RETURNS: - * Zero. - */ -int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev, - sector_t capacity, int geom[]) -{ - geom[0] = 255; - geom[1] = 63; - sector_div(capacity, 255*63); - geom[2] = capacity; - - return 0; -} - -/** - * ata_cmd_ioctl - Handler for HDIO_DRIVE_CMD ioctl - * @scsidev: Device to which we are issuing command - * @arg: User provided data for issuing command - * - * LOCKING: - * Defined by the SCSI layer. We don't really care. - * - * RETURNS: - * Zero on success, negative errno on error. - */ - -int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) -{ - int rc = 0; - u8 scsi_cmd[MAX_COMMAND_SIZE]; - u8 args[4], *argbuf = NULL; - int argsize = 0; - struct scsi_sense_hdr sshdr; - enum dma_data_direction data_dir; - - if (arg == NULL) - return -EINVAL; - - if (copy_from_user(args, arg, sizeof(args))) - return -EFAULT; - - memset(scsi_cmd, 0, sizeof(scsi_cmd)); - - if (args[3]) { - argsize = SECTOR_SIZE * args[3]; - argbuf = kmalloc(argsize, GFP_KERNEL); - if (argbuf == NULL) { - rc = -ENOMEM; - goto error; - } - - scsi_cmd[1] = (4 << 1); /* PIO Data-in */ - scsi_cmd[2] = 0x0e; /* no off.line or cc, read from dev, - block count in sector count field */ - data_dir = DMA_FROM_DEVICE; - } else { - scsi_cmd[1] = (3 << 1); /* Non-data */ - /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */ - data_dir = DMA_NONE; - } - - scsi_cmd[0] = ATA_16; - - scsi_cmd[4] = args[2]; - if (args[0] == WIN_SMART) { /* hack -- ide driver does this too... */ - scsi_cmd[6] = args[3]; - scsi_cmd[8] = args[1]; - scsi_cmd[10] = 0x4f; - scsi_cmd[12] = 0xc2; - } else { - scsi_cmd[6] = args[1]; - } - scsi_cmd[14] = args[0]; - - /* Good values for timeout and retries? Values below - from scsi_ioctl_send_command() for default case... */ - if (scsi_execute_req(scsidev, scsi_cmd, data_dir, argbuf, argsize, - &sshdr, (10*HZ), 5)) { - rc = -EIO; - goto error; - } - - /* Need code to retrieve data from check condition? */ - - if ((argbuf) - && copy_to_user(arg + sizeof(args), argbuf, argsize)) - rc = -EFAULT; -error: - kfree(argbuf); - return rc; -} - -/** - * ata_task_ioctl - Handler for HDIO_DRIVE_TASK ioctl - * @scsidev: Device to which we are issuing command - * @arg: User provided data for issuing command - * - * LOCKING: - * Defined by the SCSI layer. We don't really care. - * - * RETURNS: - * Zero on success, negative errno on error. - */ -int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg) -{ - int rc = 0; - u8 scsi_cmd[MAX_COMMAND_SIZE]; - u8 args[7]; - struct scsi_sense_hdr sshdr; - - if (arg == NULL) - return -EINVAL; - - if (copy_from_user(args, arg, sizeof(args))) - return -EFAULT; - - memset(scsi_cmd, 0, sizeof(scsi_cmd)); - scsi_cmd[0] = ATA_16; - scsi_cmd[1] = (3 << 1); /* Non-data */ - /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */ - scsi_cmd[4] = args[1]; - scsi_cmd[6] = args[2]; - scsi_cmd[8] = args[3]; - scsi_cmd[10] = args[4]; - scsi_cmd[12] = args[5]; - scsi_cmd[14] = args[0]; - - /* Good values for timeout and retries? Values below - from scsi_ioctl_send_command() for default case... */ - if (scsi_execute_req(scsidev, scsi_cmd, DMA_NONE, NULL, 0, &sshdr, - (10*HZ), 5)) - rc = -EIO; - - /* Need code to retrieve data from check condition? */ - return rc; -} - -int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg) -{ - int val = -EINVAL, rc = -EINVAL; - - switch (cmd) { - case ATA_IOC_GET_IO32: - val = 0; - if (copy_to_user(arg, &val, 1)) - return -EFAULT; - return 0; - - case ATA_IOC_SET_IO32: - val = (unsigned long) arg; - if (val != 0) - return -EINVAL; - return 0; - - case HDIO_DRIVE_CMD: - if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) - return -EACCES; - return ata_cmd_ioctl(scsidev, arg); - - case HDIO_DRIVE_TASK: - if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) - return -EACCES; - return ata_task_ioctl(scsidev, arg); - - default: - rc = -ENOTTY; - break; - } - - return rc; -} - -/** - * ata_scsi_qc_new - acquire new ata_queued_cmd reference - * @dev: ATA device to which the new command is attached - * @cmd: SCSI command that originated this ATA command - * @done: SCSI command completion function - * - * Obtain a reference to an unused ata_queued_cmd structure, - * which is the basic libata structure representing a single - * ATA command sent to the hardware. - * - * If a command was available, fill in the SCSI-specific - * portions of the structure with information on the - * current command. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Command allocated, or %NULL if none available. - */ -struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev, - struct scsi_cmnd *cmd, - void (*done)(struct scsi_cmnd *)) -{ - struct ata_queued_cmd *qc; - - qc = ata_qc_new_init(dev); - if (qc) { - qc->scsicmd = cmd; - qc->scsidone = done; - - if (cmd->use_sg) { - qc->__sg = (struct scatterlist *) cmd->request_buffer; - qc->n_elem = cmd->use_sg; - } else { - qc->__sg = &qc->sgent; - qc->n_elem = 1; - } - } else { - cmd->result = (DID_OK << 16) | (QUEUE_FULL << 1); - done(cmd); - } - - return qc; -} - -/** - * ata_dump_status - user friendly display of error info - * @id: id of the port in question - * @tf: ptr to filled out taskfile - * - * Decode and dump the ATA error/status registers for the user so - * that they have some idea what really happened at the non - * make-believe layer. - * - * LOCKING: - * inherited from caller - */ -void ata_dump_status(unsigned id, struct ata_taskfile *tf) -{ - u8 stat = tf->command, err = tf->feature; - - printk(KERN_WARNING "ata%u: status=0x%02x { ", id, stat); - if (stat & ATA_BUSY) { - printk("Busy }\n"); /* Data is not valid in this case */ - } else { - if (stat & 0x40) printk("DriveReady "); - if (stat & 0x20) printk("DeviceFault "); - if (stat & 0x10) printk("SeekComplete "); - if (stat & 0x08) printk("DataRequest "); - if (stat & 0x04) printk("CorrectedError "); - if (stat & 0x02) printk("Index "); - if (stat & 0x01) printk("Error "); - printk("}\n"); - - if (err) { - printk(KERN_WARNING "ata%u: error=0x%02x { ", id, err); - if (err & 0x04) printk("DriveStatusError "); - if (err & 0x80) { - if (err & 0x04) printk("BadCRC "); - else printk("Sector "); - } - if (err & 0x40) printk("UncorrectableError "); - if (err & 0x10) printk("SectorIdNotFound "); - if (err & 0x02) printk("TrackZeroNotFound "); - if (err & 0x01) printk("AddrMarkNotFound "); - printk("}\n"); - } - } -} - -/** - * ata_scsi_device_suspend - suspend ATA device associated with sdev - * @sdev: the SCSI device to suspend - * @mesg: target power management message - * - * Request suspend EH action on the ATA device associated with - * @sdev and wait for the operation to complete. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t mesg) -{ - struct ata_port *ap = ata_shost_to_port(sdev->host); - struct ata_device *dev = ata_scsi_find_dev(ap, sdev); - unsigned long flags; - unsigned int action; - int rc = 0; - - if (!dev) - goto out; - - spin_lock_irqsave(ap->lock, flags); - - /* wait for the previous resume to complete */ - while (dev->flags & ATA_DFLAG_SUSPENDED) { - spin_unlock_irqrestore(ap->lock, flags); - ata_port_wait_eh(ap); - spin_lock_irqsave(ap->lock, flags); - } - - /* if @sdev is already detached, nothing to do */ - if (sdev->sdev_state == SDEV_OFFLINE || - sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL) - goto out_unlock; - - /* request suspend */ - action = ATA_EH_SUSPEND; - if (mesg.event != PM_EVENT_SUSPEND) - action |= ATA_EH_PM_FREEZE; - ap->eh_info.dev_action[dev->devno] |= action; - ap->eh_info.flags |= ATA_EHI_QUIET; - ata_port_schedule_eh(ap); - - spin_unlock_irqrestore(ap->lock, flags); - - /* wait for EH to do the job */ - ata_port_wait_eh(ap); - - spin_lock_irqsave(ap->lock, flags); - - /* If @sdev is still attached but the associated ATA device - * isn't suspended, the operation failed. - */ - if (sdev->sdev_state != SDEV_OFFLINE && - sdev->sdev_state != SDEV_CANCEL && sdev->sdev_state != SDEV_DEL && - !(dev->flags & ATA_DFLAG_SUSPENDED)) - rc = -EIO; - - out_unlock: - spin_unlock_irqrestore(ap->lock, flags); - out: - if (rc == 0) - sdev->sdev_gendev.power.power_state = mesg; - return rc; -} - -/** - * ata_scsi_device_resume - resume ATA device associated with sdev - * @sdev: the SCSI device to resume - * - * Request resume EH action on the ATA device associated with - * @sdev and return immediately. This enables parallel - * wakeup/spinup of devices. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0. - */ -int ata_scsi_device_resume(struct scsi_device *sdev) -{ - struct ata_port *ap = ata_shost_to_port(sdev->host); - struct ata_device *dev = ata_scsi_find_dev(ap, sdev); - struct ata_eh_info *ehi = &ap->eh_info; - unsigned long flags; - unsigned int action; - - if (!dev) - goto out; - - spin_lock_irqsave(ap->lock, flags); - - /* if @sdev is already detached, nothing to do */ - if (sdev->sdev_state == SDEV_OFFLINE || - sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL) - goto out_unlock; - - /* request resume */ - action = ATA_EH_RESUME; - if (sdev->sdev_gendev.power.power_state.event == PM_EVENT_SUSPEND) - __ata_ehi_hotplugged(ehi); - else - action |= ATA_EH_PM_FREEZE | ATA_EH_SOFTRESET; - ehi->dev_action[dev->devno] |= action; - - /* We don't want autopsy and verbose EH messages. Disable - * those if we're the only device on this link. - */ - if (ata_port_max_devices(ap) == 1) - ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET; - - ata_port_schedule_eh(ap); - - out_unlock: - spin_unlock_irqrestore(ap->lock, flags); - out: - sdev->sdev_gendev.power.power_state = PMSG_ON; - return 0; -} - -/** - * ata_to_sense_error - convert ATA error to SCSI error - * @id: ATA device number - * @drv_stat: value contained in ATA status register - * @drv_err: value contained in ATA error register - * @sk: the sense key we'll fill out - * @asc: the additional sense code we'll fill out - * @ascq: the additional sense code qualifier we'll fill out - * @verbose: be verbose - * - * Converts an ATA error into a SCSI error. Fill out pointers to - * SK, ASC, and ASCQ bytes for later use in fixed or descriptor - * format sense blocks. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, - u8 *ascq, int verbose) -{ - int i; - - /* Based on the 3ware driver translation table */ - static const unsigned char sense_table[][4] = { - /* BBD|ECC|ID|MAR */ - {0xd1, ABORTED_COMMAND, 0x00, 0x00}, // Device busy Aborted command - /* BBD|ECC|ID */ - {0xd0, ABORTED_COMMAND, 0x00, 0x00}, // Device busy Aborted command - /* ECC|MC|MARK */ - {0x61, HARDWARE_ERROR, 0x00, 0x00}, // Device fault Hardware error - /* ICRC|ABRT */ /* NB: ICRC & !ABRT is BBD */ - {0x84, ABORTED_COMMAND, 0x47, 0x00}, // Data CRC error SCSI parity error - /* MC|ID|ABRT|TRK0|MARK */ - {0x37, NOT_READY, 0x04, 0x00}, // Unit offline Not ready - /* MCR|MARK */ - {0x09, NOT_READY, 0x04, 0x00}, // Unrecovered disk error Not ready - /* Bad address mark */ - {0x01, MEDIUM_ERROR, 0x13, 0x00}, // Address mark not found Address mark not found for data field - /* TRK0 */ - {0x02, HARDWARE_ERROR, 0x00, 0x00}, // Track 0 not found Hardware error - /* Abort & !ICRC */ - {0x04, ABORTED_COMMAND, 0x00, 0x00}, // Aborted command Aborted command - /* Media change request */ - {0x08, NOT_READY, 0x04, 0x00}, // Media change request FIXME: faking offline - /* SRV */ - {0x10, ABORTED_COMMAND, 0x14, 0x00}, // ID not found Recorded entity not found - /* Media change */ - {0x08, NOT_READY, 0x04, 0x00}, // Media change FIXME: faking offline - /* ECC */ - {0x40, MEDIUM_ERROR, 0x11, 0x04}, // Uncorrectable ECC error Unrecovered read error - /* BBD - block marked bad */ - {0x80, MEDIUM_ERROR, 0x11, 0x04}, // Block marked bad Medium error, unrecovered read error - {0xFF, 0xFF, 0xFF, 0xFF}, // END mark - }; - static const unsigned char stat_table[][4] = { - /* Must be first because BUSY means no other bits valid */ - {0x80, ABORTED_COMMAND, 0x47, 0x00}, // Busy, fake parity for now - {0x20, HARDWARE_ERROR, 0x00, 0x00}, // Device fault - {0x08, ABORTED_COMMAND, 0x47, 0x00}, // Timed out in xfer, fake parity for now - {0x04, RECOVERED_ERROR, 0x11, 0x00}, // Recovered ECC error Medium error, recovered - {0xFF, 0xFF, 0xFF, 0xFF}, // END mark - }; - - /* - * Is this an error we can process/parse - */ - if (drv_stat & ATA_BUSY) { - drv_err = 0; /* Ignore the err bits, they're invalid */ - } - - if (drv_err) { - /* Look for drv_err */ - for (i = 0; sense_table[i][0] != 0xFF; i++) { - /* Look for best matches first */ - if ((sense_table[i][0] & drv_err) == - sense_table[i][0]) { - *sk = sense_table[i][1]; - *asc = sense_table[i][2]; - *ascq = sense_table[i][3]; - goto translate_done; - } - } - /* No immediate match */ - if (verbose) - printk(KERN_WARNING "ata%u: no sense translation for " - "error 0x%02x\n", id, drv_err); - } - - /* Fall back to interpreting status bits */ - for (i = 0; stat_table[i][0] != 0xFF; i++) { - if (stat_table[i][0] & drv_stat) { - *sk = stat_table[i][1]; - *asc = stat_table[i][2]; - *ascq = stat_table[i][3]; - goto translate_done; - } - } - /* No error? Undecoded? */ - if (verbose) - printk(KERN_WARNING "ata%u: no sense translation for " - "status: 0x%02x\n", id, drv_stat); - - /* We need a sensible error return here, which is tricky, and one - that won't cause people to do things like return a disk wrongly */ - *sk = ABORTED_COMMAND; - *asc = 0x00; - *ascq = 0x00; - - translate_done: - if (verbose) - printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x " - "to SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n", - id, drv_stat, drv_err, *sk, *asc, *ascq); - return; -} - -/* - * ata_gen_ata_desc_sense - Generate check condition sense block. - * @qc: Command that completed. - * - * This function is specific to the ATA descriptor format sense - * block specified for the ATA pass through commands. Regardless - * of whether the command errored or not, return a sense - * block. Copy all controller registers into the sense - * block. Clear sense key, ASC & ASCQ if there is no error. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc) -{ - struct scsi_cmnd *cmd = qc->scsicmd; - struct ata_taskfile *tf = &qc->result_tf; - unsigned char *sb = cmd->sense_buffer; - unsigned char *desc = sb + 8; - int verbose = qc->ap->ops->error_handler == NULL; - - memset(sb, 0, SCSI_SENSE_BUFFERSIZE); - - cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; - - /* - * Use ata_to_sense_error() to map status register bits - * onto sense key, asc & ascq. - */ - if (qc->err_mask || - tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { - ata_to_sense_error(qc->ap->id, tf->command, tf->feature, - &sb[1], &sb[2], &sb[3], verbose); - sb[1] &= 0x0f; - } - - /* - * Sense data is current and format is descriptor. - */ - sb[0] = 0x72; - - desc[0] = 0x09; - - /* - * Set length of additional sense data. - * Since we only populate descriptor 0, the total - * length is the same (fixed) length as descriptor 0. - */ - desc[1] = sb[7] = 14; - - /* - * Copy registers into sense buffer. - */ - desc[2] = 0x00; - desc[3] = tf->feature; /* == error reg */ - desc[5] = tf->nsect; - desc[7] = tf->lbal; - desc[9] = tf->lbam; - desc[11] = tf->lbah; - desc[12] = tf->device; - desc[13] = tf->command; /* == status reg */ - - /* - * Fill in Extend bit, and the high order bytes - * if applicable. - */ - if (tf->flags & ATA_TFLAG_LBA48) { - desc[2] |= 0x01; - desc[4] = tf->hob_nsect; - desc[6] = tf->hob_lbal; - desc[8] = tf->hob_lbam; - desc[10] = tf->hob_lbah; - } -} - -/** - * ata_gen_fixed_sense - generate a SCSI fixed sense block - * @qc: Command that we are erroring out - * - * Leverage ata_to_sense_error() to give us the codes. Fit our - * LBA in here if there's room. - * - * LOCKING: - * inherited from caller - */ -void ata_gen_fixed_sense(struct ata_queued_cmd *qc) -{ - struct scsi_cmnd *cmd = qc->scsicmd; - struct ata_taskfile *tf = &qc->result_tf; - unsigned char *sb = cmd->sense_buffer; - int verbose = qc->ap->ops->error_handler == NULL; - - memset(sb, 0, SCSI_SENSE_BUFFERSIZE); - - cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; - - /* - * Use ata_to_sense_error() to map status register bits - * onto sense key, asc & ascq. - */ - if (qc->err_mask || - tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { - ata_to_sense_error(qc->ap->id, tf->command, tf->feature, - &sb[2], &sb[12], &sb[13], verbose); - sb[2] &= 0x0f; - } - - sb[0] = 0x70; - sb[7] = 0x0a; - - if (tf->flags & ATA_TFLAG_LBA48) { - /* TODO: find solution for LBA48 descriptors */ - } - - else if (tf->flags & ATA_TFLAG_LBA) { - /* A small (28b) LBA will fit in the 32b info field */ - sb[0] |= 0x80; /* set valid bit */ - sb[3] = tf->device & 0x0f; - sb[4] = tf->lbah; - sb[5] = tf->lbam; - sb[6] = tf->lbal; - } - - else { - /* TODO: C/H/S */ - } -} - -static void ata_scsi_sdev_config(struct scsi_device *sdev) -{ - sdev->use_10_for_rw = 1; - sdev->use_10_for_ms = 1; -} - -static void ata_scsi_dev_config(struct scsi_device *sdev, - struct ata_device *dev) -{ - unsigned int max_sectors; - - /* TODO: 2048 is an arbitrary number, not the - * hardware maximum. This should be increased to - * 65534 when Jens Axboe's patch for dynamically - * determining max_sectors is merged. - */ - max_sectors = ATA_MAX_SECTORS; - if (dev->flags & ATA_DFLAG_LBA48) - max_sectors = ATA_MAX_SECTORS_LBA48; - if (dev->max_sectors) - max_sectors = dev->max_sectors; - - blk_queue_max_sectors(sdev->request_queue, max_sectors); - - /* - * SATA DMA transfers must be multiples of 4 byte, so - * we need to pad ATAPI transfers using an extra sg. - * Decrement max hw segments accordingly. - */ - if (dev->class == ATA_DEV_ATAPI) { - request_queue_t *q = sdev->request_queue; - blk_queue_max_hw_segments(q, q->max_hw_segments - 1); - } - - if (dev->flags & ATA_DFLAG_NCQ) { - int depth; - - depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id)); - depth = min(ATA_MAX_QUEUE - 1, depth); - scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth); - } -} - -/** - * ata_scsi_slave_config - Set SCSI device attributes - * @sdev: SCSI device to examine - * - * This is called before we actually start reading - * and writing to the device, to configure certain - * SCSI mid-layer behaviors. - * - * LOCKING: - * Defined by SCSI layer. We don't really care. - */ - -int ata_scsi_slave_config(struct scsi_device *sdev) -{ - struct ata_port *ap = ata_shost_to_port(sdev->host); - struct ata_device *dev = __ata_scsi_find_dev(ap, sdev); - - ata_scsi_sdev_config(sdev); - - blk_queue_max_phys_segments(sdev->request_queue, LIBATA_MAX_PRD); - - if (dev) - ata_scsi_dev_config(sdev, dev); - - return 0; /* scsi layer doesn't check return value, sigh */ -} - -/** - * ata_scsi_slave_destroy - SCSI device is about to be destroyed - * @sdev: SCSI device to be destroyed - * - * @sdev is about to be destroyed for hot/warm unplugging. If - * this unplugging was initiated by libata as indicated by NULL - * dev->sdev, this function doesn't have to do anything. - * Otherwise, SCSI layer initiated warm-unplug is in progress. - * Clear dev->sdev, schedule the device for ATA detach and invoke - * EH. - * - * LOCKING: - * Defined by SCSI layer. We don't really care. - */ -void ata_scsi_slave_destroy(struct scsi_device *sdev) -{ - struct ata_port *ap = ata_shost_to_port(sdev->host); - unsigned long flags; - struct ata_device *dev; - - if (!ap->ops->error_handler) - return; - - spin_lock_irqsave(ap->lock, flags); - dev = __ata_scsi_find_dev(ap, sdev); - if (dev && dev->sdev) { - /* SCSI device already in CANCEL state, no need to offline it */ - dev->sdev = NULL; - dev->flags |= ATA_DFLAG_DETACH; - ata_port_schedule_eh(ap); - } - spin_unlock_irqrestore(ap->lock, flags); -} - -/** - * ata_scsi_change_queue_depth - SCSI callback for queue depth config - * @sdev: SCSI device to configure queue depth for - * @queue_depth: new queue depth - * - * This is libata standard hostt->change_queue_depth callback. - * SCSI will call into this callback when user tries to set queue - * depth via sysfs. - * - * LOCKING: - * SCSI layer (we don't care) - * - * RETURNS: - * Newly configured queue depth. - */ -int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth) -{ - struct ata_port *ap = ata_shost_to_port(sdev->host); - struct ata_device *dev; - int max_depth; - - if (queue_depth < 1) - return sdev->queue_depth; - - dev = ata_scsi_find_dev(ap, sdev); - if (!dev || !ata_dev_enabled(dev)) - return sdev->queue_depth; - - max_depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id)); - max_depth = min(ATA_MAX_QUEUE - 1, max_depth); - if (queue_depth > max_depth) - queue_depth = max_depth; - - scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, queue_depth); - return queue_depth; -} - -/** - * ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command - * @qc: Storage for translated ATA taskfile - * @scsicmd: SCSI command to translate - * - * Sets up an ATA taskfile to issue STANDBY (to stop) or READ VERIFY - * (to start). Perhaps these commands should be preceded by - * CHECK POWER MODE to see what power mode the device is already in. - * [See SAT revision 5 at www.t10.org] - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Zero on success, non-zero on error. - */ - -static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, - const u8 *scsicmd) -{ - struct ata_taskfile *tf = &qc->tf; - - tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; - tf->protocol = ATA_PROT_NODATA; - if (scsicmd[1] & 0x1) { - ; /* ignore IMMED bit, violates sat-r05 */ - } - if (scsicmd[4] & 0x2) - goto invalid_fld; /* LOEJ bit set not supported */ - if (((scsicmd[4] >> 4) & 0xf) != 0) - goto invalid_fld; /* power conditions not supported */ - if (scsicmd[4] & 0x1) { - tf->nsect = 1; /* 1 sector, lba=0 */ - - if (qc->dev->flags & ATA_DFLAG_LBA) { - tf->flags |= ATA_TFLAG_LBA; - - tf->lbah = 0x0; - tf->lbam = 0x0; - tf->lbal = 0x0; - tf->device |= ATA_LBA; - } else { - /* CHS */ - tf->lbal = 0x1; /* sect */ - tf->lbam = 0x0; /* cyl low */ - tf->lbah = 0x0; /* cyl high */ - } - - tf->command = ATA_CMD_VERIFY; /* READ VERIFY */ - } else { - tf->nsect = 0; /* time period value (0 implies now) */ - tf->command = ATA_CMD_STANDBY; - /* Consider: ATA STANDBY IMMEDIATE command */ - } - /* - * Standby and Idle condition timers could be implemented but that - * would require libata to implement the Power condition mode page - * and allow the user to change it. Changing mode pages requires - * MODE SELECT to be implemented. - */ - - return 0; - -invalid_fld: - ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); - /* "Invalid field in cbd" */ - return 1; -} - - -/** - * ata_scsi_flush_xlat - Translate SCSI SYNCHRONIZE CACHE command - * @qc: Storage for translated ATA taskfile - * @scsicmd: SCSI command to translate (ignored) - * - * Sets up an ATA taskfile to issue FLUSH CACHE or - * FLUSH CACHE EXT. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Zero on success, non-zero on error. - */ - -static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) -{ - struct ata_taskfile *tf = &qc->tf; - - tf->flags |= ATA_TFLAG_DEVICE; - tf->protocol = ATA_PROT_NODATA; - - if ((qc->dev->flags & ATA_DFLAG_LBA48) && - (ata_id_has_flush_ext(qc->dev->id))) - tf->command = ATA_CMD_FLUSH_EXT; - else - tf->command = ATA_CMD_FLUSH; - - return 0; -} - -/** - * scsi_6_lba_len - Get LBA and transfer length - * @scsicmd: SCSI command to translate - * - * Calculate LBA and transfer length for 6-byte commands. - * - * RETURNS: - * @plba: the LBA - * @plen: the transfer length - */ - -static void scsi_6_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) -{ - u64 lba = 0; - u32 len = 0; - - VPRINTK("six-byte command\n"); - - lba |= ((u64)scsicmd[2]) << 8; - lba |= ((u64)scsicmd[3]); - - len |= ((u32)scsicmd[4]); - - *plba = lba; - *plen = len; -} - -/** - * scsi_10_lba_len - Get LBA and transfer length - * @scsicmd: SCSI command to translate - * - * Calculate LBA and transfer length for 10-byte commands. - * - * RETURNS: - * @plba: the LBA - * @plen: the transfer length - */ - -static void scsi_10_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) -{ - u64 lba = 0; - u32 len = 0; - - VPRINTK("ten-byte command\n"); - - lba |= ((u64)scsicmd[2]) << 24; - lba |= ((u64)scsicmd[3]) << 16; - lba |= ((u64)scsicmd[4]) << 8; - lba |= ((u64)scsicmd[5]); - - len |= ((u32)scsicmd[7]) << 8; - len |= ((u32)scsicmd[8]); - - *plba = lba; - *plen = len; -} - -/** - * scsi_16_lba_len - Get LBA and transfer length - * @scsicmd: SCSI command to translate - * - * Calculate LBA and transfer length for 16-byte commands. - * - * RETURNS: - * @plba: the LBA - * @plen: the transfer length - */ - -static void scsi_16_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) -{ - u64 lba = 0; - u32 len = 0; - - VPRINTK("sixteen-byte command\n"); - - lba |= ((u64)scsicmd[2]) << 56; - lba |= ((u64)scsicmd[3]) << 48; - lba |= ((u64)scsicmd[4]) << 40; - lba |= ((u64)scsicmd[5]) << 32; - lba |= ((u64)scsicmd[6]) << 24; - lba |= ((u64)scsicmd[7]) << 16; - lba |= ((u64)scsicmd[8]) << 8; - lba |= ((u64)scsicmd[9]); - - len |= ((u32)scsicmd[10]) << 24; - len |= ((u32)scsicmd[11]) << 16; - len |= ((u32)scsicmd[12]) << 8; - len |= ((u32)scsicmd[13]); - - *plba = lba; - *plen = len; -} - -/** - * ata_scsi_verify_xlat - Translate SCSI VERIFY command into an ATA one - * @qc: Storage for translated ATA taskfile - * @scsicmd: SCSI command to translate - * - * Converts SCSI VERIFY command to an ATA READ VERIFY command. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Zero on success, non-zero on error. - */ - -static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) -{ - struct ata_taskfile *tf = &qc->tf; - struct ata_device *dev = qc->dev; - u64 dev_sectors = qc->dev->n_sectors; - u64 block; - u32 n_block; - - tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - tf->protocol = ATA_PROT_NODATA; - - if (scsicmd[0] == VERIFY) - scsi_10_lba_len(scsicmd, &block, &n_block); - else if (scsicmd[0] == VERIFY_16) - scsi_16_lba_len(scsicmd, &block, &n_block); - else - goto invalid_fld; - - if (!n_block) - goto nothing_to_do; - if (block >= dev_sectors) - goto out_of_range; - if ((block + n_block) > dev_sectors) - goto out_of_range; - - if (dev->flags & ATA_DFLAG_LBA) { - tf->flags |= ATA_TFLAG_LBA; - - if (lba_28_ok(block, n_block)) { - /* use LBA28 */ - tf->command = ATA_CMD_VERIFY; - tf->device |= (block >> 24) & 0xf; - } else if (lba_48_ok(block, n_block)) { - if (!(dev->flags & ATA_DFLAG_LBA48)) - goto out_of_range; - - /* use LBA48 */ - tf->flags |= ATA_TFLAG_LBA48; - tf->command = ATA_CMD_VERIFY_EXT; - - tf->hob_nsect = (n_block >> 8) & 0xff; - - tf->hob_lbah = (block >> 40) & 0xff; - tf->hob_lbam = (block >> 32) & 0xff; - tf->hob_lbal = (block >> 24) & 0xff; - } else - /* request too large even for LBA48 */ - goto out_of_range; - - tf->nsect = n_block & 0xff; - - tf->lbah = (block >> 16) & 0xff; - tf->lbam = (block >> 8) & 0xff; - tf->lbal = block & 0xff; - - tf->device |= ATA_LBA; - } else { - /* CHS */ - u32 sect, head, cyl, track; - - if (!lba_28_ok(block, n_block)) - goto out_of_range; - - /* Convert LBA to CHS */ - track = (u32)block / dev->sectors; - cyl = track / dev->heads; - head = track % dev->heads; - sect = (u32)block % dev->sectors + 1; - - DPRINTK("block %u track %u cyl %u head %u sect %u\n", - (u32)block, track, cyl, head, sect); - - /* Check whether the converted CHS can fit. - Cylinder: 0-65535 - Head: 0-15 - Sector: 1-255*/ - if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) - goto out_of_range; - - tf->command = ATA_CMD_VERIFY; - tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ - tf->lbal = sect; - tf->lbam = cyl; - tf->lbah = cyl >> 8; - tf->device |= head; - } - - return 0; - -invalid_fld: - ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); - /* "Invalid field in cbd" */ - return 1; - -out_of_range: - ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0); - /* "Logical Block Address out of range" */ - return 1; - -nothing_to_do: - qc->scsicmd->result = SAM_STAT_GOOD; - return 1; -} - -/** - * ata_scsi_rw_xlat - Translate SCSI r/w command into an ATA one - * @qc: Storage for translated ATA taskfile - * @scsicmd: SCSI command to translate - * - * Converts any of six SCSI read/write commands into the - * ATA counterpart, including starting sector (LBA), - * sector count, and taking into account the device's LBA48 - * support. - * - * Commands %READ_6, %READ_10, %READ_16, %WRITE_6, %WRITE_10, and - * %WRITE_16 are currently supported. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Zero on success, non-zero on error. - */ - -static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) -{ - struct ata_taskfile *tf = &qc->tf; - struct ata_device *dev = qc->dev; - u64 block; - u32 n_block; - - qc->flags |= ATA_QCFLAG_IO; - tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - - if (scsicmd[0] == WRITE_10 || scsicmd[0] == WRITE_6 || - scsicmd[0] == WRITE_16) - tf->flags |= ATA_TFLAG_WRITE; - - /* Calculate the SCSI LBA, transfer length and FUA. */ - switch (scsicmd[0]) { - case READ_10: - case WRITE_10: - scsi_10_lba_len(scsicmd, &block, &n_block); - if (unlikely(scsicmd[1] & (1 << 3))) - tf->flags |= ATA_TFLAG_FUA; - break; - case READ_6: - case WRITE_6: - scsi_6_lba_len(scsicmd, &block, &n_block); - - /* for 6-byte r/w commands, transfer length 0 - * means 256 blocks of data, not 0 block. - */ - if (!n_block) - n_block = 256; - break; - case READ_16: - case WRITE_16: - scsi_16_lba_len(scsicmd, &block, &n_block); - if (unlikely(scsicmd[1] & (1 << 3))) - tf->flags |= ATA_TFLAG_FUA; - break; - default: - DPRINTK("no-byte command\n"); - goto invalid_fld; - } - - /* Check and compose ATA command */ - if (!n_block) - /* For 10-byte and 16-byte SCSI R/W commands, transfer - * length 0 means transfer 0 block of data. - * However, for ATA R/W commands, sector count 0 means - * 256 or 65536 sectors, not 0 sectors as in SCSI. - * - * WARNING: one or two older ATA drives treat 0 as 0... - */ - goto nothing_to_do; - - if ((dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ) { - /* yay, NCQ */ - if (!lba_48_ok(block, n_block)) - goto out_of_range; - - tf->protocol = ATA_PROT_NCQ; - tf->flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48; - - if (tf->flags & ATA_TFLAG_WRITE) - tf->command = ATA_CMD_FPDMA_WRITE; - else - tf->command = ATA_CMD_FPDMA_READ; - - qc->nsect = n_block; - - tf->nsect = qc->tag << 3; - tf->hob_feature = (n_block >> 8) & 0xff; - tf->feature = n_block & 0xff; - - tf->hob_lbah = (block >> 40) & 0xff; - tf->hob_lbam = (block >> 32) & 0xff; - tf->hob_lbal = (block >> 24) & 0xff; - tf->lbah = (block >> 16) & 0xff; - tf->lbam = (block >> 8) & 0xff; - tf->lbal = block & 0xff; - - tf->device = 1 << 6; - if (tf->flags & ATA_TFLAG_FUA) - tf->device |= 1 << 7; - } else if (dev->flags & ATA_DFLAG_LBA) { - tf->flags |= ATA_TFLAG_LBA; - - if (lba_28_ok(block, n_block)) { - /* use LBA28 */ - tf->device |= (block >> 24) & 0xf; - } else if (lba_48_ok(block, n_block)) { - if (!(dev->flags & ATA_DFLAG_LBA48)) - goto out_of_range; - - /* use LBA48 */ - tf->flags |= ATA_TFLAG_LBA48; - - tf->hob_nsect = (n_block >> 8) & 0xff; - - tf->hob_lbah = (block >> 40) & 0xff; - tf->hob_lbam = (block >> 32) & 0xff; - tf->hob_lbal = (block >> 24) & 0xff; - } else - /* request too large even for LBA48 */ - goto out_of_range; - - if (unlikely(ata_rwcmd_protocol(qc) < 0)) - goto invalid_fld; - - qc->nsect = n_block; - tf->nsect = n_block & 0xff; - - tf->lbah = (block >> 16) & 0xff; - tf->lbam = (block >> 8) & 0xff; - tf->lbal = block & 0xff; - - tf->device |= ATA_LBA; - } else { - /* CHS */ - u32 sect, head, cyl, track; - - /* The request -may- be too large for CHS addressing. */ - if (!lba_28_ok(block, n_block)) - goto out_of_range; - - if (unlikely(ata_rwcmd_protocol(qc) < 0)) - goto invalid_fld; - - /* Convert LBA to CHS */ - track = (u32)block / dev->sectors; - cyl = track / dev->heads; - head = track % dev->heads; - sect = (u32)block % dev->sectors + 1; - - DPRINTK("block %u track %u cyl %u head %u sect %u\n", - (u32)block, track, cyl, head, sect); - - /* Check whether the converted CHS can fit. - Cylinder: 0-65535 - Head: 0-15 - Sector: 1-255*/ - if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) - goto out_of_range; - - qc->nsect = n_block; - tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ - tf->lbal = sect; - tf->lbam = cyl; - tf->lbah = cyl >> 8; - tf->device |= head; - } - - return 0; - -invalid_fld: - ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); - /* "Invalid field in cbd" */ - return 1; - -out_of_range: - ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0); - /* "Logical Block Address out of range" */ - return 1; - -nothing_to_do: - qc->scsicmd->result = SAM_STAT_GOOD; - return 1; -} - -static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) -{ - struct scsi_cmnd *cmd = qc->scsicmd; - u8 *cdb = cmd->cmnd; - int need_sense = (qc->err_mask != 0); - - /* We snoop the SET_FEATURES - Write Cache ON/OFF command, and - * schedule EH_REVALIDATE operation to update the IDENTIFY DEVICE - * cache - */ - if (!need_sense && (qc->tf.command == ATA_CMD_SET_FEATURES) && - ((qc->tf.feature == SETFEATURES_WC_ON) || - (qc->tf.feature == SETFEATURES_WC_OFF))) { - qc->ap->eh_info.action |= ATA_EH_REVALIDATE; - ata_port_schedule_eh(qc->ap); - } - - /* For ATA pass thru (SAT) commands, generate a sense block if - * user mandated it or if there's an error. Note that if we - * generate because the user forced us to, a check condition - * is generated and the ATA register values are returned - * whether the command completed successfully or not. If there - * was no error, SK, ASC and ASCQ will all be zero. - */ - if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) && - ((cdb[2] & 0x20) || need_sense)) { - ata_gen_ata_desc_sense(qc); - } else { - if (!need_sense) { - cmd->result = SAM_STAT_GOOD; - } else { - /* TODO: decide which descriptor format to use - * for 48b LBA devices and call that here - * instead of the fixed desc, which is only - * good for smaller LBA (and maybe CHS?) - * devices. - */ - ata_gen_fixed_sense(qc); - } - } - - if (need_sense && !qc->ap->ops->error_handler) - ata_dump_status(qc->ap->id, &qc->result_tf); - - qc->scsidone(cmd); - - ata_qc_free(qc); -} - -/** - * ata_scmd_need_defer - Check whether we need to defer scmd - * @dev: ATA device to which the command is addressed - * @is_io: Is the command IO (and thus possibly NCQ)? - * - * NCQ and non-NCQ commands cannot run together. As upper layer - * only knows the queue depth, we are responsible for maintaining - * exclusion. This function checks whether a new command can be - * issued to @dev. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * 1 if deferring is needed, 0 otherwise. - */ -static int ata_scmd_need_defer(struct ata_device *dev, int is_io) -{ - struct ata_port *ap = dev->ap; - - if (!(dev->flags & ATA_DFLAG_NCQ)) - return 0; - - if (is_io) { - if (!ata_tag_valid(ap->active_tag)) - return 0; - } else { - if (!ata_tag_valid(ap->active_tag) && !ap->sactive) - return 0; - } - return 1; -} - -/** - * ata_scsi_translate - Translate then issue SCSI command to ATA device - * @dev: ATA device to which the command is addressed - * @cmd: SCSI command to execute - * @done: SCSI command completion function - * @xlat_func: Actor which translates @cmd to an ATA taskfile - * - * Our ->queuecommand() function has decided that the SCSI - * command issued can be directly translated into an ATA - * command, rather than handled internally. - * - * This function sets up an ata_queued_cmd structure for the - * SCSI command, and sends that ata_queued_cmd to the hardware. - * - * The xlat_func argument (actor) returns 0 if ready to execute - * ATA command, else 1 to finish translation. If 1 is returned - * then cmd->result (and possibly cmd->sense_buffer) are assumed - * to be set reflecting an error condition or clean (early) - * termination. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * 0 on success, SCSI_ML_QUEUE_DEVICE_BUSY if the command - * needs to be deferred. - */ -static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, - void (*done)(struct scsi_cmnd *), - ata_xlat_func_t xlat_func) -{ - struct ata_queued_cmd *qc; - u8 *scsicmd = cmd->cmnd; - int is_io = xlat_func == ata_scsi_rw_xlat; - - VPRINTK("ENTER\n"); - - if (unlikely(ata_scmd_need_defer(dev, is_io))) - goto defer; - - qc = ata_scsi_qc_new(dev, cmd, done); - if (!qc) - goto err_mem; - - /* data is present; dma-map it */ - if (cmd->sc_data_direction == DMA_FROM_DEVICE || - cmd->sc_data_direction == DMA_TO_DEVICE) { - if (unlikely(cmd->request_bufflen < 1)) { - ata_dev_printk(dev, KERN_WARNING, - "WARNING: zero len r/w req\n"); - goto err_did; - } - - if (cmd->use_sg) - ata_sg_init(qc, cmd->request_buffer, cmd->use_sg); - else - ata_sg_init_one(qc, cmd->request_buffer, - cmd->request_bufflen); - - qc->dma_dir = cmd->sc_data_direction; - } - - qc->complete_fn = ata_scsi_qc_complete; - - if (xlat_func(qc, scsicmd)) - goto early_finish; - - /* select device, send command to hardware */ - ata_qc_issue(qc); - - VPRINTK("EXIT\n"); - return 0; - -early_finish: - ata_qc_free(qc); - done(cmd); - DPRINTK("EXIT - early finish (good or error)\n"); - return 0; - -err_did: - ata_qc_free(qc); -err_mem: - cmd->result = (DID_ERROR << 16); - done(cmd); - DPRINTK("EXIT - internal\n"); - return 0; - -defer: - DPRINTK("EXIT - defer\n"); - return SCSI_MLQUEUE_DEVICE_BUSY; -} - -/** - * ata_scsi_rbuf_get - Map response buffer. - * @cmd: SCSI command containing buffer to be mapped. - * @buf_out: Pointer to mapped area. - * - * Maps buffer contained within SCSI command @cmd. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Length of response buffer. - */ - -static unsigned int ata_scsi_rbuf_get(struct scsi_cmnd *cmd, u8 **buf_out) -{ - u8 *buf; - unsigned int buflen; - - if (cmd->use_sg) { - struct scatterlist *sg; - - sg = (struct scatterlist *) cmd->request_buffer; - buf = kmap_atomic(sg->page, KM_USER0) + sg->offset; - buflen = sg->length; - } else { - buf = cmd->request_buffer; - buflen = cmd->request_bufflen; - } - - *buf_out = buf; - return buflen; -} - -/** - * ata_scsi_rbuf_put - Unmap response buffer. - * @cmd: SCSI command containing buffer to be unmapped. - * @buf: buffer to unmap - * - * Unmaps response buffer contained within @cmd. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static inline void ata_scsi_rbuf_put(struct scsi_cmnd *cmd, u8 *buf) -{ - if (cmd->use_sg) { - struct scatterlist *sg; - - sg = (struct scatterlist *) cmd->request_buffer; - kunmap_atomic(buf - sg->offset, KM_USER0); - } -} - -/** - * ata_scsi_rbuf_fill - wrapper for SCSI command simulators - * @args: device IDENTIFY data / SCSI command of interest. - * @actor: Callback hook for desired SCSI command simulator - * - * Takes care of the hard work of simulating a SCSI command... - * Mapping the response buffer, calling the command's handler, - * and handling the handler's return value. This return value - * indicates whether the handler wishes the SCSI command to be - * completed successfully (0), or not (in which case cmd->result - * and sense buffer are assumed to be set). - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -void ata_scsi_rbuf_fill(struct ata_scsi_args *args, - unsigned int (*actor) (struct ata_scsi_args *args, - u8 *rbuf, unsigned int buflen)) -{ - u8 *rbuf; - unsigned int buflen, rc; - struct scsi_cmnd *cmd = args->cmd; - - buflen = ata_scsi_rbuf_get(cmd, &rbuf); - memset(rbuf, 0, buflen); - rc = actor(args, rbuf, buflen); - ata_scsi_rbuf_put(cmd, rbuf); - - if (rc == 0) - cmd->result = SAM_STAT_GOOD; - args->done(cmd); -} - -/** - * ata_scsiop_inq_std - Simulate INQUIRY command - * @args: device IDENTIFY data / SCSI command of interest. - * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. - * @buflen: Response buffer length. - * - * Returns standard device identification data associated - * with non-VPD INQUIRY command output. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen) -{ - u8 hdr[] = { - TYPE_DISK, - 0, - 0x5, /* claim SPC-3 version compatibility */ - 2, - 95 - 4 - }; - - /* set scsi removeable (RMB) bit per ata bit */ - if (ata_id_removeable(args->id)) - hdr[1] |= (1 << 7); - - VPRINTK("ENTER\n"); - - memcpy(rbuf, hdr, sizeof(hdr)); - - if (buflen > 35) { - memcpy(&rbuf[8], "ATA ", 8); - ata_id_string(args->id, &rbuf[16], ATA_ID_PROD_OFS, 16); - ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV_OFS, 4); - if (rbuf[32] == 0 || rbuf[32] == ' ') - memcpy(&rbuf[32], "n/a ", 4); - } - - if (buflen > 63) { - const u8 versions[] = { - 0x60, /* SAM-3 (no version claimed) */ - - 0x03, - 0x20, /* SBC-2 (no version claimed) */ - - 0x02, - 0x60 /* SPC-3 (no version claimed) */ - }; - - memcpy(rbuf + 59, versions, sizeof(versions)); - } - - return 0; -} - -/** - * ata_scsiop_inq_00 - Simulate INQUIRY VPD page 0, list of pages - * @args: device IDENTIFY data / SCSI command of interest. - * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. - * @buflen: Response buffer length. - * - * Returns list of inquiry VPD pages available. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen) -{ - const u8 pages[] = { - 0x00, /* page 0x00, this page */ - 0x80, /* page 0x80, unit serial no page */ - 0x83 /* page 0x83, device ident page */ - }; - rbuf[3] = sizeof(pages); /* number of supported VPD pages */ - - if (buflen > 6) - memcpy(rbuf + 4, pages, sizeof(pages)); - - return 0; -} - -/** - * ata_scsiop_inq_80 - Simulate INQUIRY VPD page 80, device serial number - * @args: device IDENTIFY data / SCSI command of interest. - * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. - * @buflen: Response buffer length. - * - * Returns ATA device serial number. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -unsigned int ata_scsiop_inq_80(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen) -{ - const u8 hdr[] = { - 0, - 0x80, /* this page code */ - 0, - ATA_SERNO_LEN, /* page len */ - }; - memcpy(rbuf, hdr, sizeof(hdr)); - - if (buflen > (ATA_SERNO_LEN + 4 - 1)) - ata_id_string(args->id, (unsigned char *) &rbuf[4], - ATA_ID_SERNO_OFS, ATA_SERNO_LEN); - - return 0; -} - -/** - * ata_scsiop_inq_83 - Simulate INQUIRY VPD page 83, device identity - * @args: device IDENTIFY data / SCSI command of interest. - * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. - * @buflen: Response buffer length. - * - * Yields two logical unit device identification designators: - * - vendor specific ASCII containing the ATA serial number - * - SAT defined "t10 vendor id based" containing ASCII vendor - * name ("ATA "), model and serial numbers. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen) -{ - int num; - const int sat_model_serial_desc_len = 68; - const int ata_model_byte_len = 40; - - rbuf[1] = 0x83; /* this page code */ - num = 4; - - if (buflen > (ATA_SERNO_LEN + num + 3)) { - /* piv=0, assoc=lu, code_set=ACSII, designator=vendor */ - rbuf[num + 0] = 2; - rbuf[num + 3] = ATA_SERNO_LEN; - num += 4; - ata_id_string(args->id, (unsigned char *) rbuf + num, - ATA_ID_SERNO_OFS, ATA_SERNO_LEN); - num += ATA_SERNO_LEN; - } - if (buflen > (sat_model_serial_desc_len + num + 3)) { - /* SAT defined lu model and serial numbers descriptor */ - /* piv=0, assoc=lu, code_set=ACSII, designator=t10 vendor id */ - rbuf[num + 0] = 2; - rbuf[num + 1] = 1; - rbuf[num + 3] = sat_model_serial_desc_len; - num += 4; - memcpy(rbuf + num, "ATA ", 8); - num += 8; - ata_id_string(args->id, (unsigned char *) rbuf + num, - ATA_ID_PROD_OFS, ata_model_byte_len); - num += ata_model_byte_len; - ata_id_string(args->id, (unsigned char *) rbuf + num, - ATA_ID_SERNO_OFS, ATA_SERNO_LEN); - num += ATA_SERNO_LEN; - } - rbuf[3] = num - 4; /* page len (assume less than 256 bytes) */ - return 0; -} - -/** - * ata_scsiop_noop - Command handler that simply returns success. - * @args: device IDENTIFY data / SCSI command of interest. - * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. - * @buflen: Response buffer length. - * - * No operation. Simply returns success to caller, to indicate - * that the caller should successfully complete this SCSI command. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -unsigned int ata_scsiop_noop(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen) -{ - VPRINTK("ENTER\n"); - return 0; -} - -/** - * ata_msense_push - Push data onto MODE SENSE data output buffer - * @ptr_io: (input/output) Location to store more output data - * @last: End of output data buffer - * @buf: Pointer to BLOB being added to output buffer - * @buflen: Length of BLOB - * - * Store MODE SENSE data on an output buffer. - * - * LOCKING: - * None. - */ - -static void ata_msense_push(u8 **ptr_io, const u8 *last, - const u8 *buf, unsigned int buflen) -{ - u8 *ptr = *ptr_io; - - if ((ptr + buflen - 1) > last) - return; - - memcpy(ptr, buf, buflen); - - ptr += buflen; - - *ptr_io = ptr; -} - -/** - * ata_msense_caching - Simulate MODE SENSE caching info page - * @id: device IDENTIFY data - * @ptr_io: (input/output) Location to store more output data - * @last: End of output data buffer - * - * Generate a caching info page, which conditionally indicates - * write caching to the SCSI layer, depending on device - * capabilities. - * - * LOCKING: - * None. - */ - -static unsigned int ata_msense_caching(u16 *id, u8 **ptr_io, - const u8 *last) -{ - u8 page[CACHE_MPAGE_LEN]; - - memcpy(page, def_cache_mpage, sizeof(page)); - if (ata_id_wcache_enabled(id)) - page[2] |= (1 << 2); /* write cache enable */ - if (!ata_id_rahead_enabled(id)) - page[12] |= (1 << 5); /* disable read ahead */ - - ata_msense_push(ptr_io, last, page, sizeof(page)); - return sizeof(page); -} - -/** - * ata_msense_ctl_mode - Simulate MODE SENSE control mode page - * @dev: Device associated with this MODE SENSE command - * @ptr_io: (input/output) Location to store more output data - * @last: End of output data buffer - * - * Generate a generic MODE SENSE control mode page. - * - * LOCKING: - * None. - */ - -static unsigned int ata_msense_ctl_mode(u8 **ptr_io, const u8 *last) -{ - ata_msense_push(ptr_io, last, def_control_mpage, - sizeof(def_control_mpage)); - return sizeof(def_control_mpage); -} - -/** - * ata_msense_rw_recovery - Simulate MODE SENSE r/w error recovery page - * @dev: Device associated with this MODE SENSE command - * @ptr_io: (input/output) Location to store more output data - * @last: End of output data buffer - * - * Generate a generic MODE SENSE r/w error recovery page. - * - * LOCKING: - * None. - */ - -static unsigned int ata_msense_rw_recovery(u8 **ptr_io, const u8 *last) -{ - - ata_msense_push(ptr_io, last, def_rw_recovery_mpage, - sizeof(def_rw_recovery_mpage)); - return sizeof(def_rw_recovery_mpage); -} - -/* - * We can turn this into a real blacklist if it's needed, for now just - * blacklist any Maxtor BANC1G10 revision firmware - */ -static int ata_dev_supports_fua(u16 *id) -{ - unsigned char model[41], fw[9]; - - if (!libata_fua) - return 0; - if (!ata_id_has_fua(id)) - return 0; - - ata_id_c_string(id, model, ATA_ID_PROD_OFS, sizeof(model)); - ata_id_c_string(id, fw, ATA_ID_FW_REV_OFS, sizeof(fw)); - - if (strcmp(model, "Maxtor")) - return 1; - if (strcmp(fw, "BANC1G10")) - return 1; - - return 0; /* blacklisted */ -} - -/** - * ata_scsiop_mode_sense - Simulate MODE SENSE 6, 10 commands - * @args: device IDENTIFY data / SCSI command of interest. - * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. - * @buflen: Response buffer length. - * - * Simulate MODE SENSE commands. Assume this is invoked for direct - * access devices (e.g. disks) only. There should be no block - * descriptor for other device types. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen) -{ - struct ata_device *dev = args->dev; - u8 *scsicmd = args->cmd->cmnd, *p, *last; - const u8 sat_blk_desc[] = { - 0, 0, 0, 0, /* number of blocks: sat unspecified */ - 0, - 0, 0x2, 0x0 /* block length: 512 bytes */ - }; - u8 pg, spg; - unsigned int ebd, page_control, six_byte, output_len, alloc_len, minlen; - u8 dpofua; - - VPRINTK("ENTER\n"); - - six_byte = (scsicmd[0] == MODE_SENSE); - ebd = !(scsicmd[1] & 0x8); /* dbd bit inverted == edb */ - /* - * LLBA bit in msense(10) ignored (compliant) - */ - - page_control = scsicmd[2] >> 6; - switch (page_control) { - case 0: /* current */ - break; /* supported */ - case 3: /* saved */ - goto saving_not_supp; - case 1: /* changeable */ - case 2: /* defaults */ - default: - goto invalid_fld; - } - - if (six_byte) { - output_len = 4 + (ebd ? 8 : 0); - alloc_len = scsicmd[4]; - } else { - output_len = 8 + (ebd ? 8 : 0); - alloc_len = (scsicmd[7] << 8) + scsicmd[8]; - } - minlen = (alloc_len < buflen) ? alloc_len : buflen; - - p = rbuf + output_len; - last = rbuf + minlen - 1; - - pg = scsicmd[2] & 0x3f; - spg = scsicmd[3]; - /* - * No mode subpages supported (yet) but asking for _all_ - * subpages may be valid - */ - if (spg && (spg != ALL_SUB_MPAGES)) - goto invalid_fld; - - switch(pg) { - case RW_RECOVERY_MPAGE: - output_len += ata_msense_rw_recovery(&p, last); - break; - - case CACHE_MPAGE: - output_len += ata_msense_caching(args->id, &p, last); - break; - - case CONTROL_MPAGE: { - output_len += ata_msense_ctl_mode(&p, last); - break; - } - - case ALL_MPAGES: - output_len += ata_msense_rw_recovery(&p, last); - output_len += ata_msense_caching(args->id, &p, last); - output_len += ata_msense_ctl_mode(&p, last); - break; - - default: /* invalid page code */ - goto invalid_fld; - } - - if (minlen < 1) - return 0; - - dpofua = 0; - if (ata_dev_supports_fua(args->id) && (dev->flags & ATA_DFLAG_LBA48) && - (!(dev->flags & ATA_DFLAG_PIO) || dev->multi_count)) - dpofua = 1 << 4; - - if (six_byte) { - output_len--; - rbuf[0] = output_len; - if (minlen > 2) - rbuf[2] |= dpofua; - if (ebd) { - if (minlen > 3) - rbuf[3] = sizeof(sat_blk_desc); - if (minlen > 11) - memcpy(rbuf + 4, sat_blk_desc, - sizeof(sat_blk_desc)); - } - } else { - output_len -= 2; - rbuf[0] = output_len >> 8; - if (minlen > 1) - rbuf[1] = output_len; - if (minlen > 3) - rbuf[3] |= dpofua; - if (ebd) { - if (minlen > 7) - rbuf[7] = sizeof(sat_blk_desc); - if (minlen > 15) - memcpy(rbuf + 8, sat_blk_desc, - sizeof(sat_blk_desc)); - } - } - return 0; - -invalid_fld: - ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x24, 0x0); - /* "Invalid field in cbd" */ - return 1; - -saving_not_supp: - ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x39, 0x0); - /* "Saving parameters not supported" */ - return 1; -} - -/** - * ata_scsiop_read_cap - Simulate READ CAPACITY[ 16] commands - * @args: device IDENTIFY data / SCSI command of interest. - * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. - * @buflen: Response buffer length. - * - * Simulate READ CAPACITY commands. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen) -{ - u64 n_sectors; - u32 tmp; - - VPRINTK("ENTER\n"); - - if (ata_id_has_lba(args->id)) { - if (ata_id_has_lba48(args->id)) - n_sectors = ata_id_u64(args->id, 100); - else - n_sectors = ata_id_u32(args->id, 60); - } else { - /* CHS default translation */ - n_sectors = args->id[1] * args->id[3] * args->id[6]; - - if (ata_id_current_chs_valid(args->id)) - /* CHS current translation */ - n_sectors = ata_id_u32(args->id, 57); - } - - n_sectors--; /* ATA TotalUserSectors - 1 */ - - if (args->cmd->cmnd[0] == READ_CAPACITY) { - if( n_sectors >= 0xffffffffULL ) - tmp = 0xffffffff ; /* Return max count on overflow */ - else - tmp = n_sectors ; - - /* sector count, 32-bit */ - rbuf[0] = tmp >> (8 * 3); - rbuf[1] = tmp >> (8 * 2); - rbuf[2] = tmp >> (8 * 1); - rbuf[3] = tmp; - - /* sector size */ - tmp = ATA_SECT_SIZE; - rbuf[6] = tmp >> 8; - rbuf[7] = tmp; - - } else { - /* sector count, 64-bit */ - tmp = n_sectors >> (8 * 4); - rbuf[2] = tmp >> (8 * 3); - rbuf[3] = tmp >> (8 * 2); - rbuf[4] = tmp >> (8 * 1); - rbuf[5] = tmp; - tmp = n_sectors; - rbuf[6] = tmp >> (8 * 3); - rbuf[7] = tmp >> (8 * 2); - rbuf[8] = tmp >> (8 * 1); - rbuf[9] = tmp; - - /* sector size */ - tmp = ATA_SECT_SIZE; - rbuf[12] = tmp >> 8; - rbuf[13] = tmp; - } - - return 0; -} - -/** - * ata_scsiop_report_luns - Simulate REPORT LUNS command - * @args: device IDENTIFY data / SCSI command of interest. - * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. - * @buflen: Response buffer length. - * - * Simulate REPORT LUNS command. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen) -{ - VPRINTK("ENTER\n"); - rbuf[3] = 8; /* just one lun, LUN 0, size 8 bytes */ - - return 0; -} - -/** - * ata_scsi_set_sense - Set SCSI sense data and status - * @cmd: SCSI request to be handled - * @sk: SCSI-defined sense key - * @asc: SCSI-defined additional sense code - * @ascq: SCSI-defined additional sense code qualifier - * - * Helper function that builds a valid fixed format, current - * response code and the given sense key (sk), additional sense - * code (asc) and additional sense code qualifier (ascq) with - * a SCSI command status of %SAM_STAT_CHECK_CONDITION and - * DRIVER_SENSE set in the upper bits of scsi_cmnd::result . - * - * LOCKING: - * Not required - */ - -void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq) -{ - cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; - - cmd->sense_buffer[0] = 0x70; /* fixed format, current */ - cmd->sense_buffer[2] = sk; - cmd->sense_buffer[7] = 18 - 8; /* additional sense length */ - cmd->sense_buffer[12] = asc; - cmd->sense_buffer[13] = ascq; -} - -/** - * ata_scsi_badcmd - End a SCSI request with an error - * @cmd: SCSI request to be handled - * @done: SCSI command completion function - * @asc: SCSI-defined additional sense code - * @ascq: SCSI-defined additional sense code qualifier - * - * Helper function that completes a SCSI command with - * %SAM_STAT_CHECK_CONDITION, with a sense key %ILLEGAL_REQUEST - * and the specified additional sense codes. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq) -{ - DPRINTK("ENTER\n"); - ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, asc, ascq); - - done(cmd); -} - -static void atapi_sense_complete(struct ata_queued_cmd *qc) -{ - if (qc->err_mask && ((qc->err_mask & AC_ERR_DEV) == 0)) { - /* FIXME: not quite right; we don't want the - * translation of taskfile registers into - * a sense descriptors, since that's only - * correct for ATA, not ATAPI - */ - ata_gen_ata_desc_sense(qc); - } - - qc->scsidone(qc->scsicmd); - ata_qc_free(qc); -} - -/* is it pointless to prefer PIO for "safety reasons"? */ -static inline int ata_pio_use_silly(struct ata_port *ap) -{ - return (ap->flags & ATA_FLAG_PIO_DMA); -} - -static void atapi_request_sense(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct scsi_cmnd *cmd = qc->scsicmd; - - DPRINTK("ATAPI request sense\n"); - - /* FIXME: is this needed? */ - memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer)); - - ap->ops->tf_read(ap, &qc->tf); - - /* fill these in, for the case where they are -not- overwritten */ - cmd->sense_buffer[0] = 0x70; - cmd->sense_buffer[2] = qc->tf.feature >> 4; - - ata_qc_reinit(qc); - - ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer)); - qc->dma_dir = DMA_FROM_DEVICE; - - memset(&qc->cdb, 0, qc->dev->cdb_len); - qc->cdb[0] = REQUEST_SENSE; - qc->cdb[4] = SCSI_SENSE_BUFFERSIZE; - - qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - qc->tf.command = ATA_CMD_PACKET; - - if (ata_pio_use_silly(ap)) { - qc->tf.protocol = ATA_PROT_ATAPI_DMA; - qc->tf.feature |= ATAPI_PKT_DMA; - } else { - qc->tf.protocol = ATA_PROT_ATAPI; - qc->tf.lbam = (8 * 1024) & 0xff; - qc->tf.lbah = (8 * 1024) >> 8; - } - qc->nbytes = SCSI_SENSE_BUFFERSIZE; - - qc->complete_fn = atapi_sense_complete; - - ata_qc_issue(qc); - - DPRINTK("EXIT\n"); -} - -static void atapi_qc_complete(struct ata_queued_cmd *qc) -{ - struct scsi_cmnd *cmd = qc->scsicmd; - unsigned int err_mask = qc->err_mask; - - VPRINTK("ENTER, err_mask 0x%X\n", err_mask); - - /* handle completion from new EH */ - if (unlikely(qc->ap->ops->error_handler && - (err_mask || qc->flags & ATA_QCFLAG_SENSE_VALID))) { - - if (!(qc->flags & ATA_QCFLAG_SENSE_VALID)) { - /* FIXME: not quite right; we don't want the - * translation of taskfile registers into a - * sense descriptors, since that's only - * correct for ATA, not ATAPI - */ - ata_gen_ata_desc_sense(qc); - } - - /* SCSI EH automatically locks door if sdev->locked is - * set. Sometimes door lock request continues to - * fail, for example, when no media is present. This - * creates a loop - SCSI EH issues door lock which - * fails and gets invoked again to acquire sense data - * for the failed command. - * - * If door lock fails, always clear sdev->locked to - * avoid this infinite loop. - */ - if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL) - qc->dev->sdev->locked = 0; - - qc->scsicmd->result = SAM_STAT_CHECK_CONDITION; - qc->scsidone(cmd); - ata_qc_free(qc); - return; - } - - /* successful completion or old EH failure path */ - if (unlikely(err_mask & AC_ERR_DEV)) { - cmd->result = SAM_STAT_CHECK_CONDITION; - atapi_request_sense(qc); - return; - } else if (unlikely(err_mask)) { - /* FIXME: not quite right; we don't want the - * translation of taskfile registers into - * a sense descriptors, since that's only - * correct for ATA, not ATAPI - */ - ata_gen_ata_desc_sense(qc); - } else { - u8 *scsicmd = cmd->cmnd; - - if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) { - u8 *buf = NULL; - unsigned int buflen; - - buflen = ata_scsi_rbuf_get(cmd, &buf); - - /* ATAPI devices typically report zero for their SCSI version, - * and sometimes deviate from the spec WRT response data - * format. If SCSI version is reported as zero like normal, - * then we make the following fixups: 1) Fake MMC-5 version, - * to indicate to the Linux scsi midlayer this is a modern - * device. 2) Ensure response data format / ATAPI information - * are always correct. - */ - if (buf[2] == 0) { - buf[2] = 0x5; - buf[3] = 0x32; - } - - ata_scsi_rbuf_put(cmd, buf); - } - - cmd->result = SAM_STAT_GOOD; - } - - qc->scsidone(cmd); - ata_qc_free(qc); -} -/** - * atapi_xlat - Initialize PACKET taskfile - * @qc: command structure to be initialized - * @scsicmd: SCSI CDB associated with this PACKET command - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Zero on success, non-zero on failure. - */ - -static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) -{ - struct scsi_cmnd *cmd = qc->scsicmd; - struct ata_device *dev = qc->dev; - int using_pio = (dev->flags & ATA_DFLAG_PIO); - int nodata = (cmd->sc_data_direction == DMA_NONE); - - if (!using_pio) - /* Check whether ATAPI DMA is safe */ - if (ata_check_atapi_dma(qc)) - using_pio = 1; - - memcpy(&qc->cdb, scsicmd, dev->cdb_len); - - qc->complete_fn = atapi_qc_complete; - - qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - if (cmd->sc_data_direction == DMA_TO_DEVICE) { - qc->tf.flags |= ATA_TFLAG_WRITE; - DPRINTK("direction: write\n"); - } - - qc->tf.command = ATA_CMD_PACKET; - - /* no data, or PIO data xfer */ - if (using_pio || nodata) { - if (nodata) - qc->tf.protocol = ATA_PROT_ATAPI_NODATA; - else - qc->tf.protocol = ATA_PROT_ATAPI; - qc->tf.lbam = (8 * 1024) & 0xff; - qc->tf.lbah = (8 * 1024) >> 8; - } - - /* DMA data xfer */ - else { - qc->tf.protocol = ATA_PROT_ATAPI_DMA; - qc->tf.feature |= ATAPI_PKT_DMA; - - if (atapi_dmadir && (cmd->sc_data_direction != DMA_TO_DEVICE)) - /* some SATA bridges need us to indicate data xfer direction */ - qc->tf.feature |= ATAPI_DMADIR; - } - - qc->nbytes = cmd->request_bufflen; - - return 0; -} - -static struct ata_device * ata_find_dev(struct ata_port *ap, int id) -{ - if (likely(id < ATA_MAX_DEVICES)) - return &ap->device[id]; - return NULL; -} - -static struct ata_device * __ata_scsi_find_dev(struct ata_port *ap, - const struct scsi_device *scsidev) -{ - /* skip commands not addressed to targets we simulate */ - if (unlikely(scsidev->channel || scsidev->lun)) - return NULL; - - return ata_find_dev(ap, scsidev->id); -} - -/** - * ata_scsi_dev_enabled - determine if device is enabled - * @dev: ATA device - * - * Determine if commands should be sent to the specified device. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * 0 if commands are not allowed / 1 if commands are allowed - */ - -static int ata_scsi_dev_enabled(struct ata_device *dev) -{ - if (unlikely(!ata_dev_enabled(dev))) - return 0; - - if (!atapi_enabled || (dev->ap->flags & ATA_FLAG_NO_ATAPI)) { - if (unlikely(dev->class == ATA_DEV_ATAPI)) { - ata_dev_printk(dev, KERN_WARNING, - "WARNING: ATAPI is %s, device ignored.\n", - atapi_enabled ? "not supported with this driver" : "disabled"); - return 0; - } - } - - return 1; -} - -/** - * ata_scsi_find_dev - lookup ata_device from scsi_cmnd - * @ap: ATA port to which the device is attached - * @scsidev: SCSI device from which we derive the ATA device - * - * Given various information provided in struct scsi_cmnd, - * map that onto an ATA bus, and using that mapping - * determine which ata_device is associated with the - * SCSI command to be sent. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Associated ATA device, or %NULL if not found. - */ -static struct ata_device * -ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev) -{ - struct ata_device *dev = __ata_scsi_find_dev(ap, scsidev); - - if (unlikely(!dev || !ata_scsi_dev_enabled(dev))) - return NULL; - - return dev; -} - -/* - * ata_scsi_map_proto - Map pass-thru protocol value to taskfile value. - * @byte1: Byte 1 from pass-thru CDB. - * - * RETURNS: - * ATA_PROT_UNKNOWN if mapping failed/unimplemented, protocol otherwise. - */ -static u8 -ata_scsi_map_proto(u8 byte1) -{ - switch((byte1 & 0x1e) >> 1) { - case 3: /* Non-data */ - return ATA_PROT_NODATA; - - case 6: /* DMA */ - return ATA_PROT_DMA; - - case 4: /* PIO Data-in */ - case 5: /* PIO Data-out */ - return ATA_PROT_PIO; - - case 10: /* Device Reset */ - case 0: /* Hard Reset */ - case 1: /* SRST */ - case 2: /* Bus Idle */ - case 7: /* Packet */ - case 8: /* DMA Queued */ - case 9: /* Device Diagnostic */ - case 11: /* UDMA Data-in */ - case 12: /* UDMA Data-Out */ - case 13: /* FPDMA */ - default: /* Reserved */ - break; - } - - return ATA_PROT_UNKNOWN; -} - -/** - * ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile - * @qc: command structure to be initialized - * @scsicmd: SCSI command to convert - * - * Handles either 12 or 16-byte versions of the CDB. - * - * RETURNS: - * Zero on success, non-zero on failure. - */ -static unsigned int -ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd) -{ - struct ata_taskfile *tf = &(qc->tf); - struct scsi_cmnd *cmd = qc->scsicmd; - struct ata_device *dev = qc->dev; - - if ((tf->protocol = ata_scsi_map_proto(scsicmd[1])) == ATA_PROT_UNKNOWN) - goto invalid_fld; - - /* We may not issue DMA commands if no DMA mode is set */ - if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0) - goto invalid_fld; - - if (scsicmd[1] & 0xe0) - /* PIO multi not supported yet */ - goto invalid_fld; - - /* - * 12 and 16 byte CDBs use different offsets to - * provide the various register values. - */ - if (scsicmd[0] == ATA_16) { - /* - * 16-byte CDB - may contain extended commands. - * - * If that is the case, copy the upper byte register values. - */ - if (scsicmd[1] & 0x01) { - tf->hob_feature = scsicmd[3]; - tf->hob_nsect = scsicmd[5]; - tf->hob_lbal = scsicmd[7]; - tf->hob_lbam = scsicmd[9]; - tf->hob_lbah = scsicmd[11]; - tf->flags |= ATA_TFLAG_LBA48; - } else - tf->flags &= ~ATA_TFLAG_LBA48; - - /* - * Always copy low byte, device and command registers. - */ - tf->feature = scsicmd[4]; - tf->nsect = scsicmd[6]; - tf->lbal = scsicmd[8]; - tf->lbam = scsicmd[10]; - tf->lbah = scsicmd[12]; - tf->device = scsicmd[13]; - tf->command = scsicmd[14]; - } else { - /* - * 12-byte CDB - incapable of extended commands. - */ - tf->flags &= ~ATA_TFLAG_LBA48; - - tf->feature = scsicmd[3]; - tf->nsect = scsicmd[4]; - tf->lbal = scsicmd[5]; - tf->lbam = scsicmd[6]; - tf->lbah = scsicmd[7]; - tf->device = scsicmd[8]; - tf->command = scsicmd[9]; - } - /* - * If slave is possible, enforce correct master/slave bit - */ - if (qc->ap->flags & ATA_FLAG_SLAVE_POSS) - tf->device = qc->dev->devno ? - tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1; - - /* - * Filter SET_FEATURES - XFER MODE command -- otherwise, - * SET_FEATURES - XFER MODE must be preceded/succeeded - * by an update to hardware-specific registers for each - * controller (i.e. the reason for ->set_piomode(), - * ->set_dmamode(), and ->post_set_mode() hooks). - */ - if ((tf->command == ATA_CMD_SET_FEATURES) - && (tf->feature == SETFEATURES_XFER)) - goto invalid_fld; - - /* - * Set flags so that all registers will be written, - * and pass on write indication (used for PIO/DMA - * setup.) - */ - tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE); - - if (cmd->sc_data_direction == DMA_TO_DEVICE) - tf->flags |= ATA_TFLAG_WRITE; - - /* - * Set transfer length. - * - * TODO: find out if we need to do more here to - * cover scatter/gather case. - */ - qc->nsect = cmd->request_bufflen / ATA_SECT_SIZE; - - /* request result TF */ - qc->flags |= ATA_QCFLAG_RESULT_TF; - - return 0; - - invalid_fld: - ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x00); - /* "Invalid field in cdb" */ - return 1; -} - -/** - * ata_get_xlat_func - check if SCSI to ATA translation is possible - * @dev: ATA device - * @cmd: SCSI command opcode to consider - * - * Look up the SCSI command given, and determine whether the - * SCSI command is to be translated or simulated. - * - * RETURNS: - * Pointer to translation function if possible, %NULL if not. - */ - -static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd) -{ - switch (cmd) { - case READ_6: - case READ_10: - case READ_16: - - case WRITE_6: - case WRITE_10: - case WRITE_16: - return ata_scsi_rw_xlat; - - case SYNCHRONIZE_CACHE: - if (ata_try_flush_cache(dev)) - return ata_scsi_flush_xlat; - break; - - case VERIFY: - case VERIFY_16: - return ata_scsi_verify_xlat; - - case ATA_12: - case ATA_16: - return ata_scsi_pass_thru; - - case START_STOP: - return ata_scsi_start_stop_xlat; - } - - return NULL; -} - -/** - * ata_scsi_dump_cdb - dump SCSI command contents to dmesg - * @ap: ATA port to which the command was being sent - * @cmd: SCSI command to dump - * - * Prints the contents of a SCSI command via printk(). - */ - -static inline void ata_scsi_dump_cdb(struct ata_port *ap, - struct scsi_cmnd *cmd) -{ -#ifdef ATA_DEBUG - struct scsi_device *scsidev = cmd->device; - u8 *scsicmd = cmd->cmnd; - - DPRINTK("CDB (%u:%d,%d,%d) %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", - ap->id, - scsidev->channel, scsidev->id, scsidev->lun, - scsicmd[0], scsicmd[1], scsicmd[2], scsicmd[3], - scsicmd[4], scsicmd[5], scsicmd[6], scsicmd[7], - scsicmd[8]); -#endif -} - -static inline int __ata_scsi_queuecmd(struct scsi_cmnd *cmd, - void (*done)(struct scsi_cmnd *), - struct ata_device *dev) -{ - int rc = 0; - - if (dev->class == ATA_DEV_ATA) { - ata_xlat_func_t xlat_func = ata_get_xlat_func(dev, - cmd->cmnd[0]); - - if (xlat_func) - rc = ata_scsi_translate(dev, cmd, done, xlat_func); - else - ata_scsi_simulate(dev, cmd, done); - } else - rc = ata_scsi_translate(dev, cmd, done, atapi_xlat); - - return rc; -} - -/** - * ata_scsi_queuecmd - Issue SCSI cdb to libata-managed device - * @cmd: SCSI command to be sent - * @done: Completion function, called when command is complete - * - * In some cases, this function translates SCSI commands into - * ATA taskfiles, and queues the taskfiles to be sent to - * hardware. In other cases, this function simulates a - * SCSI device by evaluating and responding to certain - * SCSI commands. This creates the overall effect of - * ATA and ATAPI devices appearing as SCSI devices. - * - * LOCKING: - * Releases scsi-layer-held lock, and obtains host_set lock. - * - * RETURNS: - * Return value from __ata_scsi_queuecmd() if @cmd can be queued, - * 0 otherwise. - */ -int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) -{ - struct ata_port *ap; - struct ata_device *dev; - struct scsi_device *scsidev = cmd->device; - struct Scsi_Host *shost = scsidev->host; - int rc = 0; - - ap = ata_shost_to_port(shost); - - spin_unlock(shost->host_lock); - spin_lock(ap->lock); - - ata_scsi_dump_cdb(ap, cmd); - - dev = ata_scsi_find_dev(ap, scsidev); - if (likely(dev)) - rc = __ata_scsi_queuecmd(cmd, done, dev); - else { - cmd->result = (DID_BAD_TARGET << 16); - done(cmd); - } - - spin_unlock(ap->lock); - spin_lock(shost->host_lock); - return rc; -} - -/** - * ata_scsi_simulate - simulate SCSI command on ATA device - * @dev: the target device - * @cmd: SCSI command being sent to device. - * @done: SCSI command completion function. - * - * Interprets and directly executes a select list of SCSI commands - * that can be handled internally. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, - void (*done)(struct scsi_cmnd *)) -{ - struct ata_scsi_args args; - const u8 *scsicmd = cmd->cmnd; - - args.dev = dev; - args.id = dev->id; - args.cmd = cmd; - args.done = done; - - switch(scsicmd[0]) { - /* no-op's, complete with success */ - case SYNCHRONIZE_CACHE: - case REZERO_UNIT: - case SEEK_6: - case SEEK_10: - case TEST_UNIT_READY: - case FORMAT_UNIT: /* FIXME: correct? */ - case SEND_DIAGNOSTIC: /* FIXME: correct? */ - ata_scsi_rbuf_fill(&args, ata_scsiop_noop); - break; - - case INQUIRY: - if (scsicmd[1] & 2) /* is CmdDt set? */ - ata_scsi_invalid_field(cmd, done); - else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */ - ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std); - else if (scsicmd[2] == 0x00) - ata_scsi_rbuf_fill(&args, ata_scsiop_inq_00); - else if (scsicmd[2] == 0x80) - ata_scsi_rbuf_fill(&args, ata_scsiop_inq_80); - else if (scsicmd[2] == 0x83) - ata_scsi_rbuf_fill(&args, ata_scsiop_inq_83); - else - ata_scsi_invalid_field(cmd, done); - break; - - case MODE_SENSE: - case MODE_SENSE_10: - ata_scsi_rbuf_fill(&args, ata_scsiop_mode_sense); - break; - - case MODE_SELECT: /* unconditionally return */ - case MODE_SELECT_10: /* bad-field-in-cdb */ - ata_scsi_invalid_field(cmd, done); - break; - - case READ_CAPACITY: - ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); - break; - - case SERVICE_ACTION_IN: - if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16) - ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); - else - ata_scsi_invalid_field(cmd, done); - break; - - case REPORT_LUNS: - ata_scsi_rbuf_fill(&args, ata_scsiop_report_luns); - break; - - /* mandatory commands we haven't implemented yet */ - case REQUEST_SENSE: - - /* all other commands */ - default: - ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x20, 0x0); - /* "Invalid command operation code" */ - done(cmd); - break; - } -} - -void ata_scsi_scan_host(struct ata_port *ap) -{ - unsigned int i; - - if (ap->flags & ATA_FLAG_DISABLED) - return; - - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; - struct scsi_device *sdev; - - if (!ata_dev_enabled(dev) || dev->sdev) - continue; - - sdev = __scsi_add_device(ap->host, 0, i, 0, NULL); - if (!IS_ERR(sdev)) { - dev->sdev = sdev; - scsi_device_put(sdev); - } - } -} - -/** - * ata_scsi_offline_dev - offline attached SCSI device - * @dev: ATA device to offline attached SCSI device for - * - * This function is called from ata_eh_hotplug() and responsible - * for taking the SCSI device attached to @dev offline. This - * function is called with host_set lock which protects dev->sdev - * against clearing. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * 1 if attached SCSI device exists, 0 otherwise. - */ -int ata_scsi_offline_dev(struct ata_device *dev) -{ - if (dev->sdev) { - scsi_device_set_state(dev->sdev, SDEV_OFFLINE); - return 1; - } - return 0; -} - -/** - * ata_scsi_remove_dev - remove attached SCSI device - * @dev: ATA device to remove attached SCSI device for - * - * This function is called from ata_eh_scsi_hotplug() and - * responsible for removing the SCSI device attached to @dev. - * - * LOCKING: - * Kernel thread context (may sleep). - */ -static void ata_scsi_remove_dev(struct ata_device *dev) -{ - struct ata_port *ap = dev->ap; - struct scsi_device *sdev; - unsigned long flags; - - /* Alas, we need to grab scan_mutex to ensure SCSI device - * state doesn't change underneath us and thus - * scsi_device_get() always succeeds. The mutex locking can - * be removed if there is __scsi_device_get() interface which - * increments reference counts regardless of device state. - */ - mutex_lock(&ap->host->scan_mutex); - spin_lock_irqsave(ap->lock, flags); - - /* clearing dev->sdev is protected by host_set lock */ - sdev = dev->sdev; - dev->sdev = NULL; - - if (sdev) { - /* If user initiated unplug races with us, sdev can go - * away underneath us after the host_set lock and - * scan_mutex are released. Hold onto it. - */ - if (scsi_device_get(sdev) == 0) { - /* The following ensures the attached sdev is - * offline on return from ata_scsi_offline_dev() - * regardless it wins or loses the race - * against this function. - */ - scsi_device_set_state(sdev, SDEV_OFFLINE); - } else { - WARN_ON(1); - sdev = NULL; - } - } - - spin_unlock_irqrestore(ap->lock, flags); - mutex_unlock(&ap->host->scan_mutex); - - if (sdev) { - ata_dev_printk(dev, KERN_INFO, "detaching (SCSI %s)\n", - sdev->sdev_gendev.bus_id); - - scsi_remove_device(sdev); - scsi_device_put(sdev); - } -} - -/** - * ata_scsi_hotplug - SCSI part of hotplug - * @data: Pointer to ATA port to perform SCSI hotplug on - * - * Perform SCSI part of hotplug. It's executed from a separate - * workqueue after EH completes. This is necessary because SCSI - * hot plugging requires working EH and hot unplugging is - * synchronized with hot plugging with a mutex. - * - * LOCKING: - * Kernel thread context (may sleep). - */ -void ata_scsi_hotplug(void *data) -{ - struct ata_port *ap = data; - int i; - - if (ap->pflags & ATA_PFLAG_UNLOADING) { - DPRINTK("ENTER/EXIT - unloading\n"); - return; - } - - DPRINTK("ENTER\n"); - - /* unplug detached devices */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; - unsigned long flags; - - if (!(dev->flags & ATA_DFLAG_DETACHED)) - continue; - - spin_lock_irqsave(ap->lock, flags); - dev->flags &= ~ATA_DFLAG_DETACHED; - spin_unlock_irqrestore(ap->lock, flags); - - ata_scsi_remove_dev(dev); - } - - /* scan for new ones */ - ata_scsi_scan_host(ap); - - /* If we scanned while EH was in progress, scan would have - * failed silently. Requeue if there are enabled but - * unattached devices. - */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; - if (ata_dev_enabled(dev) && !dev->sdev) { - queue_delayed_work(ata_aux_wq, &ap->hotplug_task, HZ); - break; - } - } - - DPRINTK("EXIT\n"); -} - -/** - * ata_scsi_user_scan - indication for user-initiated bus scan - * @shost: SCSI host to scan - * @channel: Channel to scan - * @id: ID to scan - * @lun: LUN to scan - * - * This function is called when user explicitly requests bus - * scan. Set probe pending flag and invoke EH. - * - * LOCKING: - * SCSI layer (we don't care) - * - * RETURNS: - * Zero. - */ -static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, - unsigned int id, unsigned int lun) -{ - struct ata_port *ap = ata_shost_to_port(shost); - unsigned long flags; - int rc = 0; - - if (!ap->ops->error_handler) - return -EOPNOTSUPP; - - if ((channel != SCAN_WILD_CARD && channel != 0) || - (lun != SCAN_WILD_CARD && lun != 0)) - return -EINVAL; - - spin_lock_irqsave(ap->lock, flags); - - if (id == SCAN_WILD_CARD) { - ap->eh_info.probe_mask |= (1 << ATA_MAX_DEVICES) - 1; - ap->eh_info.action |= ATA_EH_SOFTRESET; - } else { - struct ata_device *dev = ata_find_dev(ap, id); - - if (dev) { - ap->eh_info.probe_mask |= 1 << dev->devno; - ap->eh_info.action |= ATA_EH_SOFTRESET; - ap->eh_info.flags |= ATA_EHI_RESUME_LINK; - } else - rc = -EINVAL; - } - - if (rc == 0) - ata_port_schedule_eh(ap); - - spin_unlock_irqrestore(ap->lock, flags); - - return rc; -} - -/** - * ata_scsi_dev_rescan - initiate scsi_rescan_device() - * @data: Pointer to ATA port to perform scsi_rescan_device() - * - * After ATA pass thru (SAT) commands are executed successfully, - * libata need to propagate the changes to SCSI layer. This - * function must be executed from ata_aux_wq such that sdev - * attach/detach don't race with rescan. - * - * LOCKING: - * Kernel thread context (may sleep). - */ -void ata_scsi_dev_rescan(void *data) -{ - struct ata_port *ap = data; - struct ata_device *dev; - unsigned int i; - - for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; - - if (ata_dev_enabled(dev) && dev->sdev) - scsi_rescan_device(&(dev->sdev->sdev_gendev)); - } -} - -/** - * ata_sas_port_alloc - Allocate port for a SAS attached SATA device - * @pdev: PCI device that the scsi device is attached to - * @port_info: Information from low-level host driver - * @host: SCSI host that the scsi device is attached to - * - * LOCKING: - * PCI/etc. bus probe sem. - * - * RETURNS: - * ata_port pointer on success / NULL on failure. - */ - -struct ata_port *ata_sas_port_alloc(struct ata_host_set *host_set, - struct ata_port_info *port_info, - struct Scsi_Host *host) -{ - struct ata_port *ap = kzalloc(sizeof(*ap), GFP_KERNEL); - struct ata_probe_ent *ent; - - if (!ap) - return NULL; - - ent = ata_probe_ent_alloc(host_set->dev, port_info); - if (!ent) { - kfree(ap); - return NULL; - } - - ata_port_init(ap, host_set, ent, 0); - ap->lock = host->host_lock; - kfree(ent); - return ap; -} -EXPORT_SYMBOL_GPL(ata_sas_port_alloc); - -/** - * ata_sas_port_start - Set port up for dma. - * @ap: Port to initialize - * - * Called just after data structures for each port are - * initialized. Allocates DMA pad. - * - * May be used as the port_start() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -int ata_sas_port_start(struct ata_port *ap) -{ - return ata_pad_alloc(ap, ap->dev); -} -EXPORT_SYMBOL_GPL(ata_sas_port_start); - -/** - * ata_port_stop - Undo ata_sas_port_start() - * @ap: Port to shut down - * - * Frees the DMA pad. - * - * May be used as the port_stop() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ - -void ata_sas_port_stop(struct ata_port *ap) -{ - ata_pad_free(ap, ap->dev); -} -EXPORT_SYMBOL_GPL(ata_sas_port_stop); - -/** - * ata_sas_port_init - Initialize a SATA device - * @ap: SATA port to initialize - * - * LOCKING: - * PCI/etc. bus probe sem. - * - * RETURNS: - * Zero on success, non-zero on error. - */ - -int ata_sas_port_init(struct ata_port *ap) -{ - int rc = ap->ops->port_start(ap); - - if (!rc) - rc = ata_bus_probe(ap); - - return rc; -} -EXPORT_SYMBOL_GPL(ata_sas_port_init); - -/** - * ata_sas_port_destroy - Destroy a SATA port allocated by ata_sas_port_alloc - * @ap: SATA port to destroy - * - */ - -void ata_sas_port_destroy(struct ata_port *ap) -{ - ap->ops->port_stop(ap); - kfree(ap); -} -EXPORT_SYMBOL_GPL(ata_sas_port_destroy); - -/** - * ata_sas_slave_configure - Default slave_config routine for libata devices - * @sdev: SCSI device to configure - * @ap: ATA port to which SCSI device is attached - * - * RETURNS: - * Zero. - */ - -int ata_sas_slave_configure(struct scsi_device *sdev, struct ata_port *ap) -{ - ata_scsi_sdev_config(sdev); - ata_scsi_dev_config(sdev, ap->device); - return 0; -} -EXPORT_SYMBOL_GPL(ata_sas_slave_configure); - -/** - * ata_sas_queuecmd - Issue SCSI cdb to libata-managed device - * @cmd: SCSI command to be sent - * @done: Completion function, called when command is complete - * @ap: ATA port to which the command is being sent - * - * RETURNS: - * Zero. - */ - -int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), - struct ata_port *ap) -{ - ata_scsi_dump_cdb(ap, cmd); - - if (likely(ata_scsi_dev_enabled(ap->device))) - __ata_scsi_queuecmd(cmd, done, ap->device); - else { - cmd->result = (DID_BAD_TARGET << 16); - done(cmd); - } - return 0; -} -EXPORT_SYMBOL_GPL(ata_sas_queuecmd); diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h deleted file mode 100644 index d4a4f82360e..00000000000 --- a/drivers/scsi/libata.h +++ /dev/null @@ -1,122 +0,0 @@ -/* - * libata.h - helper library for ATA - * - * Copyright 2003-2004 Red Hat, Inc. All rights reserved. - * Copyright 2003-2004 Jeff Garzik - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - */ - -#ifndef __LIBATA_H__ -#define __LIBATA_H__ - -#define DRV_NAME "libata" -#define DRV_VERSION "2.00" /* must be exactly four chars */ - -struct ata_scsi_args { - struct ata_device *dev; - u16 *id; - struct scsi_cmnd *cmd; - void (*done)(struct scsi_cmnd *); -}; - -/* libata-core.c */ -extern struct workqueue_struct *ata_aux_wq; -extern int atapi_enabled; -extern int atapi_dmadir; -extern int libata_fua; -extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev); -extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc); -extern void ata_dev_disable(struct ata_device *dev); -extern void ata_port_flush_task(struct ata_port *ap); -extern unsigned ata_exec_internal(struct ata_device *dev, - struct ata_taskfile *tf, const u8 *cdb, - int dma_dir, void *buf, unsigned int buflen); -extern unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd); -extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, - int post_reset, u16 *id); -extern int ata_dev_configure(struct ata_device *dev, int print_info); -extern int sata_down_spd_limit(struct ata_port *ap); -extern int sata_set_spd_needed(struct ata_port *ap); -extern int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0); -extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev); -extern void ata_qc_free(struct ata_queued_cmd *qc); -extern void ata_qc_issue(struct ata_queued_cmd *qc); -extern void __ata_qc_complete(struct ata_queued_cmd *qc); -extern int ata_check_atapi_dma(struct ata_queued_cmd *qc); -extern void ata_dev_select(struct ata_port *ap, unsigned int device, - unsigned int wait, unsigned int can_sleep); -extern void swap_buf_le16(u16 *buf, unsigned int buf_words); -extern int ata_flush_cache(struct ata_device *dev); -extern void ata_dev_init(struct ata_device *dev); -extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg); -extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg); -extern void ata_port_init(struct ata_port *ap, struct ata_host_set *host_set, - const struct ata_probe_ent *ent, unsigned int port_no); -extern struct ata_probe_ent *ata_probe_ent_alloc(struct device *dev, - const struct ata_port_info *port); - - -/* libata-scsi.c */ -extern struct scsi_transport_template ata_scsi_transport_template; - -extern void ata_scsi_scan_host(struct ata_port *ap); -extern int ata_scsi_offline_dev(struct ata_device *dev); -extern void ata_scsi_hotplug(void *data); -extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen); - -extern unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen); - -extern unsigned int ata_scsiop_inq_80(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen); -extern unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen); -extern unsigned int ata_scsiop_noop(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen); -extern unsigned int ata_scsiop_sync_cache(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen); -extern unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen); -extern unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen); -extern unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen); -extern void ata_scsi_badcmd(struct scsi_cmnd *cmd, - void (*done)(struct scsi_cmnd *), - u8 asc, u8 ascq); -extern void ata_scsi_set_sense(struct scsi_cmnd *cmd, - u8 sk, u8 asc, u8 ascq); -extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args, - unsigned int (*actor) (struct ata_scsi_args *args, - u8 *rbuf, unsigned int buflen)); -extern void ata_schedule_scsi_eh(struct Scsi_Host *shost); -extern void ata_scsi_dev_rescan(void *data); -extern int ata_bus_probe(struct ata_port *ap); - -/* libata-eh.c */ -extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd); -extern void ata_scsi_error(struct Scsi_Host *host); -extern void ata_port_wait_eh(struct ata_port *ap); -extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc); - -#endif /* __LIBATA_H__ */ diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c deleted file mode 100644 index 61d2aa697b4..00000000000 --- a/drivers/scsi/pdc_adma.c +++ /dev/null @@ -1,740 +0,0 @@ -/* - * pdc_adma.c - Pacific Digital Corporation ADMA - * - * Maintained by: Mark Lord - * - * Copyright 2005 Mark Lord - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * - * Supports ATA disks in single-packet ADMA mode. - * Uses PIO for everything else. - * - * TODO: Use ADMA transfers for ATAPI devices, when possible. - * This requires careful attention to a number of quirks of the chip. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "pdc_adma" -#define DRV_VERSION "0.04" - -/* macro to calculate base address for ATA regs */ -#define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40)) - -/* macro to calculate base address for ADMA regs */ -#define ADMA_REGS(base,port_no) ((base) + 0x80 + ((port_no) * 0x20)) - -enum { - ADMA_PORTS = 2, - ADMA_CPB_BYTES = 40, - ADMA_PRD_BYTES = LIBATA_MAX_PRD * 16, - ADMA_PKT_BYTES = ADMA_CPB_BYTES + ADMA_PRD_BYTES, - - ADMA_DMA_BOUNDARY = 0xffffffff, - - /* global register offsets */ - ADMA_MODE_LOCK = 0x00c7, - - /* per-channel register offsets */ - ADMA_CONTROL = 0x0000, /* ADMA control */ - ADMA_STATUS = 0x0002, /* ADMA status */ - ADMA_CPB_COUNT = 0x0004, /* CPB count */ - ADMA_CPB_CURRENT = 0x000c, /* current CPB address */ - ADMA_CPB_NEXT = 0x000c, /* next CPB address */ - ADMA_CPB_LOOKUP = 0x0010, /* CPB lookup table */ - ADMA_FIFO_IN = 0x0014, /* input FIFO threshold */ - ADMA_FIFO_OUT = 0x0016, /* output FIFO threshold */ - - /* ADMA_CONTROL register bits */ - aNIEN = (1 << 8), /* irq mask: 1==masked */ - aGO = (1 << 7), /* packet trigger ("Go!") */ - aRSTADM = (1 << 5), /* ADMA logic reset */ - aPIOMD4 = 0x0003, /* PIO mode 4 */ - - /* ADMA_STATUS register bits */ - aPSD = (1 << 6), - aUIRQ = (1 << 4), - aPERR = (1 << 0), - - /* CPB bits */ - cDONE = (1 << 0), - cVLD = (1 << 0), - cDAT = (1 << 2), - cIEN = (1 << 3), - - /* PRD bits */ - pORD = (1 << 4), - pDIRO = (1 << 5), - pEND = (1 << 7), - - /* ATA register flags */ - rIGN = (1 << 5), - rEND = (1 << 7), - - /* ATA register addresses */ - ADMA_REGS_CONTROL = 0x0e, - ADMA_REGS_SECTOR_COUNT = 0x12, - ADMA_REGS_LBA_LOW = 0x13, - ADMA_REGS_LBA_MID = 0x14, - ADMA_REGS_LBA_HIGH = 0x15, - ADMA_REGS_DEVICE = 0x16, - ADMA_REGS_COMMAND = 0x17, - - /* PCI device IDs */ - board_1841_idx = 0, /* ADMA 2-port controller */ -}; - -typedef enum { adma_state_idle, adma_state_pkt, adma_state_mmio } adma_state_t; - -struct adma_port_priv { - u8 *pkt; - dma_addr_t pkt_dma; - adma_state_t state; -}; - -static int adma_ata_init_one (struct pci_dev *pdev, - const struct pci_device_id *ent); -static irqreturn_t adma_intr (int irq, void *dev_instance, - struct pt_regs *regs); -static int adma_port_start(struct ata_port *ap); -static void adma_host_stop(struct ata_host_set *host_set); -static void adma_port_stop(struct ata_port *ap); -static void adma_phy_reset(struct ata_port *ap); -static void adma_qc_prep(struct ata_queued_cmd *qc); -static unsigned int adma_qc_issue(struct ata_queued_cmd *qc); -static int adma_check_atapi_dma(struct ata_queued_cmd *qc); -static void adma_bmdma_stop(struct ata_queued_cmd *qc); -static u8 adma_bmdma_status(struct ata_port *ap); -static void adma_irq_clear(struct ata_port *ap); -static void adma_eng_timeout(struct ata_port *ap); - -static struct scsi_host_template adma_ata_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ENABLE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ADMA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, -}; - -static const struct ata_port_operations adma_ata_ops = { - .port_disable = ata_port_disable, - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .check_atapi_dma = adma_check_atapi_dma, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - .phy_reset = adma_phy_reset, - .qc_prep = adma_qc_prep, - .qc_issue = adma_qc_issue, - .eng_timeout = adma_eng_timeout, - .data_xfer = ata_mmio_data_xfer, - .irq_handler = adma_intr, - .irq_clear = adma_irq_clear, - .port_start = adma_port_start, - .port_stop = adma_port_stop, - .host_stop = adma_host_stop, - .bmdma_stop = adma_bmdma_stop, - .bmdma_status = adma_bmdma_status, -}; - -static struct ata_port_info adma_port_info[] = { - /* board_1841_idx */ - { - .sht = &adma_ata_sht, - .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | - ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | - ATA_FLAG_PIO_POLLING, - .pio_mask = 0x10, /* pio4 */ - .udma_mask = 0x1f, /* udma0-4 */ - .port_ops = &adma_ata_ops, - }, -}; - -static const struct pci_device_id adma_ata_pci_tbl[] = { - { PCI_VENDOR_ID_PDC, 0x1841, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_1841_idx }, - - { } /* terminate list */ -}; - -static struct pci_driver adma_ata_pci_driver = { - .name = DRV_NAME, - .id_table = adma_ata_pci_tbl, - .probe = adma_ata_init_one, - .remove = ata_pci_remove_one, -}; - -static int adma_check_atapi_dma(struct ata_queued_cmd *qc) -{ - return 1; /* ATAPI DMA not yet supported */ -} - -static void adma_bmdma_stop(struct ata_queued_cmd *qc) -{ - /* nothing */ -} - -static u8 adma_bmdma_status(struct ata_port *ap) -{ - return 0; -} - -static void adma_irq_clear(struct ata_port *ap) -{ - /* nothing */ -} - -static void adma_reset_engine(void __iomem *chan) -{ - /* reset ADMA to idle state */ - writew(aPIOMD4 | aNIEN | aRSTADM, chan + ADMA_CONTROL); - udelay(2); - writew(aPIOMD4, chan + ADMA_CONTROL); - udelay(2); -} - -static void adma_reinit_engine(struct ata_port *ap) -{ - struct adma_port_priv *pp = ap->private_data; - void __iomem *mmio_base = ap->host_set->mmio_base; - void __iomem *chan = ADMA_REGS(mmio_base, ap->port_no); - - /* mask/clear ATA interrupts */ - writeb(ATA_NIEN, (void __iomem *)ap->ioaddr.ctl_addr); - ata_check_status(ap); - - /* reset the ADMA engine */ - adma_reset_engine(chan); - - /* set in-FIFO threshold to 0x100 */ - writew(0x100, chan + ADMA_FIFO_IN); - - /* set CPB pointer */ - writel((u32)pp->pkt_dma, chan + ADMA_CPB_NEXT); - - /* set out-FIFO threshold to 0x100 */ - writew(0x100, chan + ADMA_FIFO_OUT); - - /* set CPB count */ - writew(1, chan + ADMA_CPB_COUNT); - - /* read/discard ADMA status */ - readb(chan + ADMA_STATUS); -} - -static inline void adma_enter_reg_mode(struct ata_port *ap) -{ - void __iomem *chan = ADMA_REGS(ap->host_set->mmio_base, ap->port_no); - - writew(aPIOMD4, chan + ADMA_CONTROL); - readb(chan + ADMA_STATUS); /* flush */ -} - -static void adma_phy_reset(struct ata_port *ap) -{ - struct adma_port_priv *pp = ap->private_data; - - pp->state = adma_state_idle; - adma_reinit_engine(ap); - ata_port_probe(ap); - ata_bus_reset(ap); -} - -static void adma_eng_timeout(struct ata_port *ap) -{ - struct adma_port_priv *pp = ap->private_data; - - if (pp->state != adma_state_idle) /* healthy paranoia */ - pp->state = adma_state_mmio; - adma_reinit_engine(ap); - ata_eng_timeout(ap); -} - -static int adma_fill_sg(struct ata_queued_cmd *qc) -{ - struct scatterlist *sg; - struct ata_port *ap = qc->ap; - struct adma_port_priv *pp = ap->private_data; - u8 *buf = pp->pkt; - int i = (2 + buf[3]) * 8; - u8 pFLAGS = pORD | ((qc->tf.flags & ATA_TFLAG_WRITE) ? pDIRO : 0); - - ata_for_each_sg(sg, qc) { - u32 addr; - u32 len; - - addr = (u32)sg_dma_address(sg); - *(__le32 *)(buf + i) = cpu_to_le32(addr); - i += 4; - - len = sg_dma_len(sg) >> 3; - *(__le32 *)(buf + i) = cpu_to_le32(len); - i += 4; - - if (ata_sg_is_last(sg, qc)) - pFLAGS |= pEND; - buf[i++] = pFLAGS; - buf[i++] = qc->dev->dma_mode & 0xf; - buf[i++] = 0; /* pPKLW */ - buf[i++] = 0; /* reserved */ - - *(__le32 *)(buf + i) - = (pFLAGS & pEND) ? 0 : cpu_to_le32(pp->pkt_dma + i + 4); - i += 4; - - VPRINTK("PRD[%u] = (0x%lX, 0x%X)\n", i/4, - (unsigned long)addr, len); - } - return i; -} - -static void adma_qc_prep(struct ata_queued_cmd *qc) -{ - struct adma_port_priv *pp = qc->ap->private_data; - u8 *buf = pp->pkt; - u32 pkt_dma = (u32)pp->pkt_dma; - int i = 0; - - VPRINTK("ENTER\n"); - - adma_enter_reg_mode(qc->ap); - if (qc->tf.protocol != ATA_PROT_DMA) { - ata_qc_prep(qc); - return; - } - - buf[i++] = 0; /* Response flags */ - buf[i++] = 0; /* reserved */ - buf[i++] = cVLD | cDAT | cIEN; - i++; /* cLEN, gets filled in below */ - - *(__le32 *)(buf+i) = cpu_to_le32(pkt_dma); /* cNCPB */ - i += 4; /* cNCPB */ - i += 4; /* cPRD, gets filled in below */ - - buf[i++] = 0; /* reserved */ - buf[i++] = 0; /* reserved */ - buf[i++] = 0; /* reserved */ - buf[i++] = 0; /* reserved */ - - /* ATA registers; must be a multiple of 4 */ - buf[i++] = qc->tf.device; - buf[i++] = ADMA_REGS_DEVICE; - if ((qc->tf.flags & ATA_TFLAG_LBA48)) { - buf[i++] = qc->tf.hob_nsect; - buf[i++] = ADMA_REGS_SECTOR_COUNT; - buf[i++] = qc->tf.hob_lbal; - buf[i++] = ADMA_REGS_LBA_LOW; - buf[i++] = qc->tf.hob_lbam; - buf[i++] = ADMA_REGS_LBA_MID; - buf[i++] = qc->tf.hob_lbah; - buf[i++] = ADMA_REGS_LBA_HIGH; - } - buf[i++] = qc->tf.nsect; - buf[i++] = ADMA_REGS_SECTOR_COUNT; - buf[i++] = qc->tf.lbal; - buf[i++] = ADMA_REGS_LBA_LOW; - buf[i++] = qc->tf.lbam; - buf[i++] = ADMA_REGS_LBA_MID; - buf[i++] = qc->tf.lbah; - buf[i++] = ADMA_REGS_LBA_HIGH; - buf[i++] = 0; - buf[i++] = ADMA_REGS_CONTROL; - buf[i++] = rIGN; - buf[i++] = 0; - buf[i++] = qc->tf.command; - buf[i++] = ADMA_REGS_COMMAND | rEND; - - buf[3] = (i >> 3) - 2; /* cLEN */ - *(__le32 *)(buf+8) = cpu_to_le32(pkt_dma + i); /* cPRD */ - - i = adma_fill_sg(qc); - wmb(); /* flush PRDs and pkt to memory */ -#if 0 - /* dump out CPB + PRDs for debug */ - { - int j, len = 0; - static char obuf[2048]; - for (j = 0; j < i; ++j) { - len += sprintf(obuf+len, "%02x ", buf[j]); - if ((j & 7) == 7) { - printk("%s\n", obuf); - len = 0; - } - } - if (len) - printk("%s\n", obuf); - } -#endif -} - -static inline void adma_packet_start(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - void __iomem *chan = ADMA_REGS(ap->host_set->mmio_base, ap->port_no); - - VPRINTK("ENTER, ap %p\n", ap); - - /* fire up the ADMA engine */ - writew(aPIOMD4 | aGO, chan + ADMA_CONTROL); -} - -static unsigned int adma_qc_issue(struct ata_queued_cmd *qc) -{ - struct adma_port_priv *pp = qc->ap->private_data; - - switch (qc->tf.protocol) { - case ATA_PROT_DMA: - pp->state = adma_state_pkt; - adma_packet_start(qc); - return 0; - - case ATA_PROT_ATAPI_DMA: - BUG(); - break; - - default: - break; - } - - pp->state = adma_state_mmio; - return ata_qc_issue_prot(qc); -} - -static inline unsigned int adma_intr_pkt(struct ata_host_set *host_set) -{ - unsigned int handled = 0, port_no; - u8 __iomem *mmio_base = host_set->mmio_base; - - for (port_no = 0; port_no < host_set->n_ports; ++port_no) { - struct ata_port *ap = host_set->ports[port_no]; - struct adma_port_priv *pp; - struct ata_queued_cmd *qc; - void __iomem *chan = ADMA_REGS(mmio_base, port_no); - u8 status = readb(chan + ADMA_STATUS); - - if (status == 0) - continue; - handled = 1; - adma_enter_reg_mode(ap); - if (ap->flags & ATA_FLAG_DISABLED) - continue; - pp = ap->private_data; - if (!pp || pp->state != adma_state_pkt) - continue; - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { - if ((status & (aPERR | aPSD | aUIRQ))) - qc->err_mask |= AC_ERR_OTHER; - else if (pp->pkt[0] != cDONE) - qc->err_mask |= AC_ERR_OTHER; - - ata_qc_complete(qc); - } - } - return handled; -} - -static inline unsigned int adma_intr_mmio(struct ata_host_set *host_set) -{ - unsigned int handled = 0, port_no; - - for (port_no = 0; port_no < host_set->n_ports; ++port_no) { - struct ata_port *ap; - ap = host_set->ports[port_no]; - if (ap && (!(ap->flags & ATA_FLAG_DISABLED))) { - struct ata_queued_cmd *qc; - struct adma_port_priv *pp = ap->private_data; - if (!pp || pp->state != adma_state_mmio) - continue; - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { - - /* check main status, clearing INTRQ */ - u8 status = ata_check_status(ap); - if ((status & ATA_BUSY)) - continue; - DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n", - ap->id, qc->tf.protocol, status); - - /* complete taskfile transaction */ - pp->state = adma_state_idle; - qc->err_mask |= ac_err_mask(status); - ata_qc_complete(qc); - handled = 1; - } - } - } - return handled; -} - -static irqreturn_t adma_intr(int irq, void *dev_instance, struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - unsigned int handled = 0; - - VPRINTK("ENTER\n"); - - spin_lock(&host_set->lock); - handled = adma_intr_pkt(host_set) | adma_intr_mmio(host_set); - spin_unlock(&host_set->lock); - - VPRINTK("EXIT\n"); - - return IRQ_RETVAL(handled); -} - -static void adma_ata_setup_port(struct ata_ioports *port, unsigned long base) -{ - port->cmd_addr = - port->data_addr = base + 0x000; - port->error_addr = - port->feature_addr = base + 0x004; - port->nsect_addr = base + 0x008; - port->lbal_addr = base + 0x00c; - port->lbam_addr = base + 0x010; - port->lbah_addr = base + 0x014; - port->device_addr = base + 0x018; - port->status_addr = - port->command_addr = base + 0x01c; - port->altstatus_addr = - port->ctl_addr = base + 0x038; -} - -static int adma_port_start(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct adma_port_priv *pp; - int rc; - - rc = ata_port_start(ap); - if (rc) - return rc; - adma_enter_reg_mode(ap); - rc = -ENOMEM; - pp = kcalloc(1, sizeof(*pp), GFP_KERNEL); - if (!pp) - goto err_out; - pp->pkt = dma_alloc_coherent(dev, ADMA_PKT_BYTES, &pp->pkt_dma, - GFP_KERNEL); - if (!pp->pkt) - goto err_out_kfree; - /* paranoia? */ - if ((pp->pkt_dma & 7) != 0) { - printk("bad alignment for pp->pkt_dma: %08x\n", - (u32)pp->pkt_dma); - dma_free_coherent(dev, ADMA_PKT_BYTES, - pp->pkt, pp->pkt_dma); - goto err_out_kfree; - } - memset(pp->pkt, 0, ADMA_PKT_BYTES); - ap->private_data = pp; - adma_reinit_engine(ap); - return 0; - -err_out_kfree: - kfree(pp); -err_out: - ata_port_stop(ap); - return rc; -} - -static void adma_port_stop(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct adma_port_priv *pp = ap->private_data; - - adma_reset_engine(ADMA_REGS(ap->host_set->mmio_base, ap->port_no)); - if (pp != NULL) { - ap->private_data = NULL; - if (pp->pkt != NULL) - dma_free_coherent(dev, ADMA_PKT_BYTES, - pp->pkt, pp->pkt_dma); - kfree(pp); - } - ata_port_stop(ap); -} - -static void adma_host_stop(struct ata_host_set *host_set) -{ - unsigned int port_no; - - for (port_no = 0; port_no < ADMA_PORTS; ++port_no) - adma_reset_engine(ADMA_REGS(host_set->mmio_base, port_no)); - - ata_pci_host_stop(host_set); -} - -static void adma_host_init(unsigned int chip_id, - struct ata_probe_ent *probe_ent) -{ - unsigned int port_no; - void __iomem *mmio_base = probe_ent->mmio_base; - - /* enable/lock aGO operation */ - writeb(7, mmio_base + ADMA_MODE_LOCK); - - /* reset the ADMA logic */ - for (port_no = 0; port_no < ADMA_PORTS; ++port_no) - adma_reset_engine(ADMA_REGS(mmio_base, port_no)); -} - -static int adma_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base) -{ - int rc; - - rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "32-bit DMA enable failed\n"); - return rc; - } - rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "32-bit consistent DMA enable failed\n"); - return rc; - } - return 0; -} - -static int adma_ata_init_one(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - static int printed_version; - struct ata_probe_ent *probe_ent = NULL; - void __iomem *mmio_base; - unsigned int board_idx = (unsigned int) ent->driver_data; - int rc, port_no; - - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) - goto err_out; - - if ((pci_resource_flags(pdev, 4) & IORESOURCE_MEM) == 0) { - rc = -ENODEV; - goto err_out_regions; - } - - mmio_base = pci_iomap(pdev, 4, 0); - if (mmio_base == NULL) { - rc = -ENOMEM; - goto err_out_regions; - } - - rc = adma_set_dma_masks(pdev, mmio_base); - if (rc) - goto err_out_iounmap; - - probe_ent = kcalloc(1, sizeof(*probe_ent), GFP_KERNEL); - if (probe_ent == NULL) { - rc = -ENOMEM; - goto err_out_iounmap; - } - - probe_ent->dev = pci_dev_to_dev(pdev); - INIT_LIST_HEAD(&probe_ent->node); - - probe_ent->sht = adma_port_info[board_idx].sht; - probe_ent->host_flags = adma_port_info[board_idx].host_flags; - probe_ent->pio_mask = adma_port_info[board_idx].pio_mask; - probe_ent->mwdma_mask = adma_port_info[board_idx].mwdma_mask; - probe_ent->udma_mask = adma_port_info[board_idx].udma_mask; - probe_ent->port_ops = adma_port_info[board_idx].port_ops; - - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = IRQF_SHARED; - probe_ent->mmio_base = mmio_base; - probe_ent->n_ports = ADMA_PORTS; - - for (port_no = 0; port_no < probe_ent->n_ports; ++port_no) { - adma_ata_setup_port(&probe_ent->port[port_no], - ADMA_ATA_REGS((unsigned long)mmio_base, port_no)); - } - - pci_set_master(pdev); - - /* initialize adapter */ - adma_host_init(board_idx, probe_ent); - - rc = ata_device_add(probe_ent); - kfree(probe_ent); - if (rc != ADMA_PORTS) - goto err_out_iounmap; - return 0; - -err_out_iounmap: - pci_iounmap(pdev, mmio_base); -err_out_regions: - pci_release_regions(pdev); -err_out: - pci_disable_device(pdev); - return rc; -} - -static int __init adma_ata_init(void) -{ - return pci_register_driver(&adma_ata_pci_driver); -} - -static void __exit adma_ata_exit(void) -{ - pci_unregister_driver(&adma_ata_pci_driver); -} - -MODULE_AUTHOR("Mark Lord"); -MODULE_DESCRIPTION("Pacific Digital Corporation ADMA low-level driver"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, adma_ata_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -module_init(adma_ata_init); -module_exit(adma_ata_exit); diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c deleted file mode 100644 index a2915a56acc..00000000000 --- a/drivers/scsi/sata_mv.c +++ /dev/null @@ -1,2468 +0,0 @@ -/* - * sata_mv.c - Marvell SATA support - * - * Copyright 2005: EMC Corporation, all rights reserved. - * Copyright 2005 Red Hat, Inc. All rights reserved. - * - * Please ALWAYS copy linux-ide@vger.kernel.org on emails. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "sata_mv" -#define DRV_VERSION "0.7" - -enum { - /* BAR's are enumerated in terms of pci_resource_start() terms */ - MV_PRIMARY_BAR = 0, /* offset 0x10: memory space */ - MV_IO_BAR = 2, /* offset 0x18: IO space */ - MV_MISC_BAR = 3, /* offset 0x1c: FLASH, NVRAM, SRAM */ - - MV_MAJOR_REG_AREA_SZ = 0x10000, /* 64KB */ - MV_MINOR_REG_AREA_SZ = 0x2000, /* 8KB */ - - MV_PCI_REG_BASE = 0, - MV_IRQ_COAL_REG_BASE = 0x18000, /* 6xxx part only */ - MV_IRQ_COAL_CAUSE = (MV_IRQ_COAL_REG_BASE + 0x08), - MV_IRQ_COAL_CAUSE_LO = (MV_IRQ_COAL_REG_BASE + 0x88), - MV_IRQ_COAL_CAUSE_HI = (MV_IRQ_COAL_REG_BASE + 0x8c), - MV_IRQ_COAL_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xcc), - MV_IRQ_COAL_TIME_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xd0), - - MV_SATAHC0_REG_BASE = 0x20000, - MV_FLASH_CTL = 0x1046c, - MV_GPIO_PORT_CTL = 0x104f0, - MV_RESET_CFG = 0x180d8, - - MV_PCI_REG_SZ = MV_MAJOR_REG_AREA_SZ, - MV_SATAHC_REG_SZ = MV_MAJOR_REG_AREA_SZ, - MV_SATAHC_ARBTR_REG_SZ = MV_MINOR_REG_AREA_SZ, /* arbiter */ - MV_PORT_REG_SZ = MV_MINOR_REG_AREA_SZ, - - MV_USE_Q_DEPTH = ATA_DEF_QUEUE, - - MV_MAX_Q_DEPTH = 32, - MV_MAX_Q_DEPTH_MASK = MV_MAX_Q_DEPTH - 1, - - /* CRQB needs alignment on a 1KB boundary. Size == 1KB - * CRPB needs alignment on a 256B boundary. Size == 256B - * SG count of 176 leads to MV_PORT_PRIV_DMA_SZ == 4KB - * ePRD (SG) entries need alignment on a 16B boundary. Size == 16B - */ - MV_CRQB_Q_SZ = (32 * MV_MAX_Q_DEPTH), - MV_CRPB_Q_SZ = (8 * MV_MAX_Q_DEPTH), - MV_MAX_SG_CT = 176, - MV_SG_TBL_SZ = (16 * MV_MAX_SG_CT), - MV_PORT_PRIV_DMA_SZ = (MV_CRQB_Q_SZ + MV_CRPB_Q_SZ + MV_SG_TBL_SZ), - - MV_PORTS_PER_HC = 4, - /* == (port / MV_PORTS_PER_HC) to determine HC from 0-7 port */ - MV_PORT_HC_SHIFT = 2, - /* == (port % MV_PORTS_PER_HC) to determine hard port from 0-7 port */ - MV_PORT_MASK = 3, - - /* Host Flags */ - MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */ - MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */ - MV_COMMON_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING), - MV_6XXX_FLAGS = MV_FLAG_IRQ_COALESCE, - - CRQB_FLAG_READ = (1 << 0), - CRQB_TAG_SHIFT = 1, - CRQB_CMD_ADDR_SHIFT = 8, - CRQB_CMD_CS = (0x2 << 11), - CRQB_CMD_LAST = (1 << 15), - - CRPB_FLAG_STATUS_SHIFT = 8, - - EPRD_FLAG_END_OF_TBL = (1 << 31), - - /* PCI interface registers */ - - PCI_COMMAND_OFS = 0xc00, - - PCI_MAIN_CMD_STS_OFS = 0xd30, - STOP_PCI_MASTER = (1 << 2), - PCI_MASTER_EMPTY = (1 << 3), - GLOB_SFT_RST = (1 << 4), - - MV_PCI_MODE = 0xd00, - MV_PCI_EXP_ROM_BAR_CTL = 0xd2c, - MV_PCI_DISC_TIMER = 0xd04, - MV_PCI_MSI_TRIGGER = 0xc38, - MV_PCI_SERR_MASK = 0xc28, - MV_PCI_XBAR_TMOUT = 0x1d04, - MV_PCI_ERR_LOW_ADDRESS = 0x1d40, - MV_PCI_ERR_HIGH_ADDRESS = 0x1d44, - MV_PCI_ERR_ATTRIBUTE = 0x1d48, - MV_PCI_ERR_COMMAND = 0x1d50, - - PCI_IRQ_CAUSE_OFS = 0x1d58, - PCI_IRQ_MASK_OFS = 0x1d5c, - PCI_UNMASK_ALL_IRQS = 0x7fffff, /* bits 22-0 */ - - HC_MAIN_IRQ_CAUSE_OFS = 0x1d60, - HC_MAIN_IRQ_MASK_OFS = 0x1d64, - PORT0_ERR = (1 << 0), /* shift by port # */ - PORT0_DONE = (1 << 1), /* shift by port # */ - HC0_IRQ_PEND = 0x1ff, /* bits 0-8 = HC0's ports */ - HC_SHIFT = 9, /* bits 9-17 = HC1's ports */ - PCI_ERR = (1 << 18), - TRAN_LO_DONE = (1 << 19), /* 6xxx: IRQ coalescing */ - TRAN_HI_DONE = (1 << 20), /* 6xxx: IRQ coalescing */ - PORTS_0_7_COAL_DONE = (1 << 21), /* 6xxx: IRQ coalescing */ - GPIO_INT = (1 << 22), - SELF_INT = (1 << 23), - TWSI_INT = (1 << 24), - HC_MAIN_RSVD = (0x7f << 25), /* bits 31-25 */ - HC_MAIN_MASKED_IRQS = (TRAN_LO_DONE | TRAN_HI_DONE | - PORTS_0_7_COAL_DONE | GPIO_INT | TWSI_INT | - HC_MAIN_RSVD), - - /* SATAHC registers */ - HC_CFG_OFS = 0, - - HC_IRQ_CAUSE_OFS = 0x14, - CRPB_DMA_DONE = (1 << 0), /* shift by port # */ - HC_IRQ_COAL = (1 << 4), /* IRQ coalescing */ - DEV_IRQ = (1 << 8), /* shift by port # */ - - /* Shadow block registers */ - SHD_BLK_OFS = 0x100, - SHD_CTL_AST_OFS = 0x20, /* ofs from SHD_BLK_OFS */ - - /* SATA registers */ - SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */ - SATA_ACTIVE_OFS = 0x350, - PHY_MODE3 = 0x310, - PHY_MODE4 = 0x314, - PHY_MODE2 = 0x330, - MV5_PHY_MODE = 0x74, - MV5_LT_MODE = 0x30, - MV5_PHY_CTL = 0x0C, - SATA_INTERFACE_CTL = 0x050, - - MV_M2_PREAMP_MASK = 0x7e0, - - /* Port registers */ - EDMA_CFG_OFS = 0, - EDMA_CFG_Q_DEPTH = 0, /* queueing disabled */ - EDMA_CFG_NCQ = (1 << 5), - EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */ - EDMA_CFG_RD_BRST_EXT = (1 << 11), /* read burst 512B */ - EDMA_CFG_WR_BUFF_LEN = (1 << 13), /* write buffer 512B */ - - EDMA_ERR_IRQ_CAUSE_OFS = 0x8, - EDMA_ERR_IRQ_MASK_OFS = 0xc, - EDMA_ERR_D_PAR = (1 << 0), - EDMA_ERR_PRD_PAR = (1 << 1), - EDMA_ERR_DEV = (1 << 2), - EDMA_ERR_DEV_DCON = (1 << 3), - EDMA_ERR_DEV_CON = (1 << 4), - EDMA_ERR_SERR = (1 << 5), - EDMA_ERR_SELF_DIS = (1 << 7), - EDMA_ERR_BIST_ASYNC = (1 << 8), - EDMA_ERR_CRBQ_PAR = (1 << 9), - EDMA_ERR_CRPB_PAR = (1 << 10), - EDMA_ERR_INTRL_PAR = (1 << 11), - EDMA_ERR_IORDY = (1 << 12), - EDMA_ERR_LNK_CTRL_RX = (0xf << 13), - EDMA_ERR_LNK_CTRL_RX_2 = (1 << 15), - EDMA_ERR_LNK_DATA_RX = (0xf << 17), - EDMA_ERR_LNK_CTRL_TX = (0x1f << 21), - EDMA_ERR_LNK_DATA_TX = (0x1f << 26), - EDMA_ERR_TRANS_PROTO = (1 << 31), - EDMA_ERR_FATAL = (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR | - EDMA_ERR_DEV_DCON | EDMA_ERR_CRBQ_PAR | - EDMA_ERR_CRPB_PAR | EDMA_ERR_INTRL_PAR | - EDMA_ERR_IORDY | EDMA_ERR_LNK_CTRL_RX_2 | - EDMA_ERR_LNK_DATA_RX | - EDMA_ERR_LNK_DATA_TX | - EDMA_ERR_TRANS_PROTO), - - EDMA_REQ_Q_BASE_HI_OFS = 0x10, - EDMA_REQ_Q_IN_PTR_OFS = 0x14, /* also contains BASE_LO */ - - EDMA_REQ_Q_OUT_PTR_OFS = 0x18, - EDMA_REQ_Q_PTR_SHIFT = 5, - - EDMA_RSP_Q_BASE_HI_OFS = 0x1c, - EDMA_RSP_Q_IN_PTR_OFS = 0x20, - EDMA_RSP_Q_OUT_PTR_OFS = 0x24, /* also contains BASE_LO */ - EDMA_RSP_Q_PTR_SHIFT = 3, - - EDMA_CMD_OFS = 0x28, - EDMA_EN = (1 << 0), - EDMA_DS = (1 << 1), - ATA_RST = (1 << 2), - - EDMA_IORDY_TMOUT = 0x34, - EDMA_ARB_CFG = 0x38, - - /* Host private flags (hp_flags) */ - MV_HP_FLAG_MSI = (1 << 0), - MV_HP_ERRATA_50XXB0 = (1 << 1), - MV_HP_ERRATA_50XXB2 = (1 << 2), - MV_HP_ERRATA_60X1B2 = (1 << 3), - MV_HP_ERRATA_60X1C0 = (1 << 4), - MV_HP_ERRATA_XX42A0 = (1 << 5), - MV_HP_50XX = (1 << 6), - MV_HP_GEN_IIE = (1 << 7), - - /* Port private flags (pp_flags) */ - MV_PP_FLAG_EDMA_EN = (1 << 0), - MV_PP_FLAG_EDMA_DS_ACT = (1 << 1), -}; - -#define IS_50XX(hpriv) ((hpriv)->hp_flags & MV_HP_50XX) -#define IS_60XX(hpriv) (((hpriv)->hp_flags & MV_HP_50XX) == 0) -#define IS_GEN_I(hpriv) IS_50XX(hpriv) -#define IS_GEN_II(hpriv) IS_60XX(hpriv) -#define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE) - -enum { - /* Our DMA boundary is determined by an ePRD being unable to handle - * anything larger than 64KB - */ - MV_DMA_BOUNDARY = 0xffffU, - - EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U, - - EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U, -}; - -enum chip_type { - chip_504x, - chip_508x, - chip_5080, - chip_604x, - chip_608x, - chip_6042, - chip_7042, -}; - -/* Command ReQuest Block: 32B */ -struct mv_crqb { - __le32 sg_addr; - __le32 sg_addr_hi; - __le16 ctrl_flags; - __le16 ata_cmd[11]; -}; - -struct mv_crqb_iie { - __le32 addr; - __le32 addr_hi; - __le32 flags; - __le32 len; - __le32 ata_cmd[4]; -}; - -/* Command ResPonse Block: 8B */ -struct mv_crpb { - __le16 id; - __le16 flags; - __le32 tmstmp; -}; - -/* EDMA Physical Region Descriptor (ePRD); A.K.A. SG */ -struct mv_sg { - __le32 addr; - __le32 flags_size; - __le32 addr_hi; - __le32 reserved; -}; - -struct mv_port_priv { - struct mv_crqb *crqb; - dma_addr_t crqb_dma; - struct mv_crpb *crpb; - dma_addr_t crpb_dma; - struct mv_sg *sg_tbl; - dma_addr_t sg_tbl_dma; - u32 pp_flags; -}; - -struct mv_port_signal { - u32 amps; - u32 pre; -}; - -struct mv_host_priv; -struct mv_hw_ops { - void (*phy_errata)(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int port); - void (*enable_leds)(struct mv_host_priv *hpriv, void __iomem *mmio); - void (*read_preamp)(struct mv_host_priv *hpriv, int idx, - void __iomem *mmio); - int (*reset_hc)(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int n_hc); - void (*reset_flash)(struct mv_host_priv *hpriv, void __iomem *mmio); - void (*reset_bus)(struct pci_dev *pdev, void __iomem *mmio); -}; - -struct mv_host_priv { - u32 hp_flags; - struct mv_port_signal signal[8]; - const struct mv_hw_ops *ops; -}; - -static void mv_irq_clear(struct ata_port *ap); -static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in); -static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val); -static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in); -static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val); -static void mv_phy_reset(struct ata_port *ap); -static void __mv_phy_reset(struct ata_port *ap, int can_sleep); -static void mv_host_stop(struct ata_host_set *host_set); -static int mv_port_start(struct ata_port *ap); -static void mv_port_stop(struct ata_port *ap); -static void mv_qc_prep(struct ata_queued_cmd *qc); -static void mv_qc_prep_iie(struct ata_queued_cmd *qc); -static unsigned int mv_qc_issue(struct ata_queued_cmd *qc); -static irqreturn_t mv_interrupt(int irq, void *dev_instance, - struct pt_regs *regs); -static void mv_eng_timeout(struct ata_port *ap); -static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); - -static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int port); -static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio); -static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx, - void __iomem *mmio); -static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int n_hc); -static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio); -static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio); - -static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int port); -static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio); -static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx, - void __iomem *mmio); -static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int n_hc); -static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio); -static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio); -static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int port_no); -static void mv_stop_and_reset(struct ata_port *ap); - -static struct scsi_host_template mv_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = MV_USE_Q_DEPTH, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = MV_MAX_SG_CT / 2, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = MV_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, -}; - -static const struct ata_port_operations mv5_ops = { - .port_disable = ata_port_disable, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .phy_reset = mv_phy_reset, - - .qc_prep = mv_qc_prep, - .qc_issue = mv_qc_issue, - .data_xfer = ata_mmio_data_xfer, - - .eng_timeout = mv_eng_timeout, - - .irq_handler = mv_interrupt, - .irq_clear = mv_irq_clear, - - .scr_read = mv5_scr_read, - .scr_write = mv5_scr_write, - - .port_start = mv_port_start, - .port_stop = mv_port_stop, - .host_stop = mv_host_stop, -}; - -static const struct ata_port_operations mv6_ops = { - .port_disable = ata_port_disable, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .phy_reset = mv_phy_reset, - - .qc_prep = mv_qc_prep, - .qc_issue = mv_qc_issue, - .data_xfer = ata_mmio_data_xfer, - - .eng_timeout = mv_eng_timeout, - - .irq_handler = mv_interrupt, - .irq_clear = mv_irq_clear, - - .scr_read = mv_scr_read, - .scr_write = mv_scr_write, - - .port_start = mv_port_start, - .port_stop = mv_port_stop, - .host_stop = mv_host_stop, -}; - -static const struct ata_port_operations mv_iie_ops = { - .port_disable = ata_port_disable, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .phy_reset = mv_phy_reset, - - .qc_prep = mv_qc_prep_iie, - .qc_issue = mv_qc_issue, - - .eng_timeout = mv_eng_timeout, - - .irq_handler = mv_interrupt, - .irq_clear = mv_irq_clear, - - .scr_read = mv_scr_read, - .scr_write = mv_scr_write, - - .port_start = mv_port_start, - .port_stop = mv_port_stop, - .host_stop = mv_host_stop, -}; - -static const struct ata_port_info mv_port_info[] = { - { /* chip_504x */ - .sht = &mv_sht, - .host_flags = MV_COMMON_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &mv5_ops, - }, - { /* chip_508x */ - .sht = &mv_sht, - .host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC), - .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &mv5_ops, - }, - { /* chip_5080 */ - .sht = &mv_sht, - .host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC), - .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &mv5_ops, - }, - { /* chip_604x */ - .sht = &mv_sht, - .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), - .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &mv6_ops, - }, - { /* chip_608x */ - .sht = &mv_sht, - .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | - MV_FLAG_DUAL_HC), - .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &mv6_ops, - }, - { /* chip_6042 */ - .sht = &mv_sht, - .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), - .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &mv_iie_ops, - }, - { /* chip_7042 */ - .sht = &mv_sht, - .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | - MV_FLAG_DUAL_HC), - .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &mv_iie_ops, - }, -}; - -static const struct pci_device_id mv_pci_tbl[] = { - {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5040), 0, 0, chip_504x}, - {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5041), 0, 0, chip_504x}, - {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5080), 0, 0, chip_5080}, - {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5081), 0, 0, chip_508x}, - - {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6040), 0, 0, chip_604x}, - {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6041), 0, 0, chip_604x}, - {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6042), 0, 0, chip_6042}, - {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6080), 0, 0, chip_608x}, - {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6081), 0, 0, chip_608x}, - - {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, 0x0241), 0, 0, chip_604x}, - {} /* terminate list */ -}; - -static struct pci_driver mv_pci_driver = { - .name = DRV_NAME, - .id_table = mv_pci_tbl, - .probe = mv_init_one, - .remove = ata_pci_remove_one, -}; - -static const struct mv_hw_ops mv5xxx_ops = { - .phy_errata = mv5_phy_errata, - .enable_leds = mv5_enable_leds, - .read_preamp = mv5_read_preamp, - .reset_hc = mv5_reset_hc, - .reset_flash = mv5_reset_flash, - .reset_bus = mv5_reset_bus, -}; - -static const struct mv_hw_ops mv6xxx_ops = { - .phy_errata = mv6_phy_errata, - .enable_leds = mv6_enable_leds, - .read_preamp = mv6_read_preamp, - .reset_hc = mv6_reset_hc, - .reset_flash = mv6_reset_flash, - .reset_bus = mv_reset_pci_bus, -}; - -/* - * module options - */ -static int msi; /* Use PCI msi; either zero (off, default) or non-zero */ - - -/* - * Functions - */ - -static inline void writelfl(unsigned long data, void __iomem *addr) -{ - writel(data, addr); - (void) readl(addr); /* flush to avoid PCI posted write */ -} - -static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc) -{ - return (base + MV_SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ)); -} - -static inline unsigned int mv_hc_from_port(unsigned int port) -{ - return port >> MV_PORT_HC_SHIFT; -} - -static inline unsigned int mv_hardport_from_port(unsigned int port) -{ - return port & MV_PORT_MASK; -} - -static inline void __iomem *mv_hc_base_from_port(void __iomem *base, - unsigned int port) -{ - return mv_hc_base(base, mv_hc_from_port(port)); -} - -static inline void __iomem *mv_port_base(void __iomem *base, unsigned int port) -{ - return mv_hc_base_from_port(base, port) + - MV_SATAHC_ARBTR_REG_SZ + - (mv_hardport_from_port(port) * MV_PORT_REG_SZ); -} - -static inline void __iomem *mv_ap_base(struct ata_port *ap) -{ - return mv_port_base(ap->host_set->mmio_base, ap->port_no); -} - -static inline int mv_get_hc_count(unsigned long host_flags) -{ - return ((host_flags & MV_FLAG_DUAL_HC) ? 2 : 1); -} - -static void mv_irq_clear(struct ata_port *ap) -{ -} - -/** - * mv_start_dma - Enable eDMA engine - * @base: port base address - * @pp: port private data - * - * Verify the local cache of the eDMA state is accurate with a - * WARN_ON. - * - * LOCKING: - * Inherited from caller. - */ -static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp) -{ - if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) { - writelfl(EDMA_EN, base + EDMA_CMD_OFS); - pp->pp_flags |= MV_PP_FLAG_EDMA_EN; - } - WARN_ON(!(EDMA_EN & readl(base + EDMA_CMD_OFS))); -} - -/** - * mv_stop_dma - Disable eDMA engine - * @ap: ATA channel to manipulate - * - * Verify the local cache of the eDMA state is accurate with a - * WARN_ON. - * - * LOCKING: - * Inherited from caller. - */ -static void mv_stop_dma(struct ata_port *ap) -{ - void __iomem *port_mmio = mv_ap_base(ap); - struct mv_port_priv *pp = ap->private_data; - u32 reg; - int i; - - if (MV_PP_FLAG_EDMA_EN & pp->pp_flags) { - /* Disable EDMA if active. The disable bit auto clears. - */ - writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS); - pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; - } else { - WARN_ON(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)); - } - - /* now properly wait for the eDMA to stop */ - for (i = 1000; i > 0; i--) { - reg = readl(port_mmio + EDMA_CMD_OFS); - if (!(EDMA_EN & reg)) { - break; - } - udelay(100); - } - - if (EDMA_EN & reg) { - ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n"); - /* FIXME: Consider doing a reset here to recover */ - } -} - -#ifdef ATA_DEBUG -static void mv_dump_mem(void __iomem *start, unsigned bytes) -{ - int b, w; - for (b = 0; b < bytes; ) { - DPRINTK("%p: ", start + b); - for (w = 0; b < bytes && w < 4; w++) { - printk("%08x ",readl(start + b)); - b += sizeof(u32); - } - printk("\n"); - } -} -#endif - -static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes) -{ -#ifdef ATA_DEBUG - int b, w; - u32 dw; - for (b = 0; b < bytes; ) { - DPRINTK("%02x: ", b); - for (w = 0; b < bytes && w < 4; w++) { - (void) pci_read_config_dword(pdev,b,&dw); - printk("%08x ",dw); - b += sizeof(u32); - } - printk("\n"); - } -#endif -} -static void mv_dump_all_regs(void __iomem *mmio_base, int port, - struct pci_dev *pdev) -{ -#ifdef ATA_DEBUG - void __iomem *hc_base = mv_hc_base(mmio_base, - port >> MV_PORT_HC_SHIFT); - void __iomem *port_base; - int start_port, num_ports, p, start_hc, num_hcs, hc; - - if (0 > port) { - start_hc = start_port = 0; - num_ports = 8; /* shld be benign for 4 port devs */ - num_hcs = 2; - } else { - start_hc = port >> MV_PORT_HC_SHIFT; - start_port = port; - num_ports = num_hcs = 1; - } - DPRINTK("All registers for port(s) %u-%u:\n", start_port, - num_ports > 1 ? num_ports - 1 : start_port); - - if (NULL != pdev) { - DPRINTK("PCI config space regs:\n"); - mv_dump_pci_cfg(pdev, 0x68); - } - DPRINTK("PCI regs:\n"); - mv_dump_mem(mmio_base+0xc00, 0x3c); - mv_dump_mem(mmio_base+0xd00, 0x34); - mv_dump_mem(mmio_base+0xf00, 0x4); - mv_dump_mem(mmio_base+0x1d00, 0x6c); - for (hc = start_hc; hc < start_hc + num_hcs; hc++) { - hc_base = mv_hc_base(mmio_base, hc); - DPRINTK("HC regs (HC %i):\n", hc); - mv_dump_mem(hc_base, 0x1c); - } - for (p = start_port; p < start_port + num_ports; p++) { - port_base = mv_port_base(mmio_base, p); - DPRINTK("EDMA regs (port %i):\n",p); - mv_dump_mem(port_base, 0x54); - DPRINTK("SATA regs (port %i):\n",p); - mv_dump_mem(port_base+0x300, 0x60); - } -#endif -} - -static unsigned int mv_scr_offset(unsigned int sc_reg_in) -{ - unsigned int ofs; - - switch (sc_reg_in) { - case SCR_STATUS: - case SCR_CONTROL: - case SCR_ERROR: - ofs = SATA_STATUS_OFS + (sc_reg_in * sizeof(u32)); - break; - case SCR_ACTIVE: - ofs = SATA_ACTIVE_OFS; /* active is not with the others */ - break; - default: - ofs = 0xffffffffU; - break; - } - return ofs; -} - -static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in) -{ - unsigned int ofs = mv_scr_offset(sc_reg_in); - - if (0xffffffffU != ofs) { - return readl(mv_ap_base(ap) + ofs); - } else { - return (u32) ofs; - } -} - -static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) -{ - unsigned int ofs = mv_scr_offset(sc_reg_in); - - if (0xffffffffU != ofs) { - writelfl(val, mv_ap_base(ap) + ofs); - } -} - -/** - * mv_host_stop - Host specific cleanup/stop routine. - * @host_set: host data structure - * - * Disable ints, cleanup host memory, call general purpose - * host_stop. - * - * LOCKING: - * Inherited from caller. - */ -static void mv_host_stop(struct ata_host_set *host_set) -{ - struct mv_host_priv *hpriv = host_set->private_data; - struct pci_dev *pdev = to_pci_dev(host_set->dev); - - if (hpriv->hp_flags & MV_HP_FLAG_MSI) { - pci_disable_msi(pdev); - } else { - pci_intx(pdev, 0); - } - kfree(hpriv); - ata_host_stop(host_set); -} - -static inline void mv_priv_free(struct mv_port_priv *pp, struct device *dev) -{ - dma_free_coherent(dev, MV_PORT_PRIV_DMA_SZ, pp->crpb, pp->crpb_dma); -} - -static void mv_edma_cfg(struct mv_host_priv *hpriv, void __iomem *port_mmio) -{ - u32 cfg = readl(port_mmio + EDMA_CFG_OFS); - - /* set up non-NCQ EDMA configuration */ - cfg &= ~0x1f; /* clear queue depth */ - cfg &= ~EDMA_CFG_NCQ; /* clear NCQ mode */ - cfg &= ~(1 << 9); /* disable equeue */ - - if (IS_GEN_I(hpriv)) - cfg |= (1 << 8); /* enab config burst size mask */ - - else if (IS_GEN_II(hpriv)) - cfg |= EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN; - - else if (IS_GEN_IIE(hpriv)) { - cfg |= (1 << 23); /* dis RX PM port mask */ - cfg &= ~(1 << 16); /* dis FIS-based switching (for now) */ - cfg &= ~(1 << 19); /* dis 128-entry queue (for now?) */ - cfg |= (1 << 18); /* enab early completion */ - cfg |= (1 << 17); /* enab host q cache */ - cfg |= (1 << 22); /* enab cutthrough */ - } - - writelfl(cfg, port_mmio + EDMA_CFG_OFS); -} - -/** - * mv_port_start - Port specific init/start routine. - * @ap: ATA channel to manipulate - * - * Allocate and point to DMA memory, init port private memory, - * zero indices. - * - * LOCKING: - * Inherited from caller. - */ -static int mv_port_start(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct mv_host_priv *hpriv = ap->host_set->private_data; - struct mv_port_priv *pp; - void __iomem *port_mmio = mv_ap_base(ap); - void *mem; - dma_addr_t mem_dma; - int rc = -ENOMEM; - - pp = kmalloc(sizeof(*pp), GFP_KERNEL); - if (!pp) - goto err_out; - memset(pp, 0, sizeof(*pp)); - - mem = dma_alloc_coherent(dev, MV_PORT_PRIV_DMA_SZ, &mem_dma, - GFP_KERNEL); - if (!mem) - goto err_out_pp; - memset(mem, 0, MV_PORT_PRIV_DMA_SZ); - - rc = ata_pad_alloc(ap, dev); - if (rc) - goto err_out_priv; - - /* First item in chunk of DMA memory: - * 32-slot command request table (CRQB), 32 bytes each in size - */ - pp->crqb = mem; - pp->crqb_dma = mem_dma; - mem += MV_CRQB_Q_SZ; - mem_dma += MV_CRQB_Q_SZ; - - /* Second item: - * 32-slot command response table (CRPB), 8 bytes each in size - */ - pp->crpb = mem; - pp->crpb_dma = mem_dma; - mem += MV_CRPB_Q_SZ; - mem_dma += MV_CRPB_Q_SZ; - - /* Third item: - * Table of scatter-gather descriptors (ePRD), 16 bytes each - */ - pp->sg_tbl = mem; - pp->sg_tbl_dma = mem_dma; - - mv_edma_cfg(hpriv, port_mmio); - - writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS); - writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK, - port_mmio + EDMA_REQ_Q_IN_PTR_OFS); - - if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0) - writelfl(pp->crqb_dma & 0xffffffff, - port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); - else - writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); - - writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS); - - if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0) - writelfl(pp->crpb_dma & 0xffffffff, - port_mmio + EDMA_RSP_Q_IN_PTR_OFS); - else - writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS); - - writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK, - port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); - - /* Don't turn on EDMA here...do it before DMA commands only. Else - * we'll be unable to send non-data, PIO, etc due to restricted access - * to shadow regs. - */ - ap->private_data = pp; - return 0; - -err_out_priv: - mv_priv_free(pp, dev); -err_out_pp: - kfree(pp); -err_out: - return rc; -} - -/** - * mv_port_stop - Port specific cleanup/stop routine. - * @ap: ATA channel to manipulate - * - * Stop DMA, cleanup port memory. - * - * LOCKING: - * This routine uses the host_set lock to protect the DMA stop. - */ -static void mv_port_stop(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct mv_port_priv *pp = ap->private_data; - unsigned long flags; - - spin_lock_irqsave(&ap->host_set->lock, flags); - mv_stop_dma(ap); - spin_unlock_irqrestore(&ap->host_set->lock, flags); - - ap->private_data = NULL; - ata_pad_free(ap, dev); - mv_priv_free(pp, dev); - kfree(pp); -} - -/** - * mv_fill_sg - Fill out the Marvell ePRD (scatter gather) entries - * @qc: queued command whose SG list to source from - * - * Populate the SG list and mark the last entry. - * - * LOCKING: - * Inherited from caller. - */ -static void mv_fill_sg(struct ata_queued_cmd *qc) -{ - struct mv_port_priv *pp = qc->ap->private_data; - unsigned int i = 0; - struct scatterlist *sg; - - ata_for_each_sg(sg, qc) { - dma_addr_t addr; - u32 sg_len, len, offset; - - addr = sg_dma_address(sg); - sg_len = sg_dma_len(sg); - - while (sg_len) { - offset = addr & MV_DMA_BOUNDARY; - len = sg_len; - if ((offset + sg_len) > 0x10000) - len = 0x10000 - offset; - - pp->sg_tbl[i].addr = cpu_to_le32(addr & 0xffffffff); - pp->sg_tbl[i].addr_hi = cpu_to_le32((addr >> 16) >> 16); - pp->sg_tbl[i].flags_size = cpu_to_le32(len & 0xffff); - - sg_len -= len; - addr += len; - - if (!sg_len && ata_sg_is_last(sg, qc)) - pp->sg_tbl[i].flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL); - - i++; - } - } -} - -static inline unsigned mv_inc_q_index(unsigned index) -{ - return (index + 1) & MV_MAX_Q_DEPTH_MASK; -} - -static inline void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last) -{ - u16 tmp = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS | - (last ? CRQB_CMD_LAST : 0); - *cmdw = cpu_to_le16(tmp); -} - -/** - * mv_qc_prep - Host specific command preparation. - * @qc: queued command to prepare - * - * This routine simply redirects to the general purpose routine - * if command is not DMA. Else, it handles prep of the CRQB - * (command request block), does some sanity checking, and calls - * the SG load routine. - * - * LOCKING: - * Inherited from caller. - */ -static void mv_qc_prep(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct mv_port_priv *pp = ap->private_data; - __le16 *cw; - struct ata_taskfile *tf; - u16 flags = 0; - unsigned in_index; - - if (ATA_PROT_DMA != qc->tf.protocol) - return; - - /* Fill in command request block - */ - if (!(qc->tf.flags & ATA_TFLAG_WRITE)) - flags |= CRQB_FLAG_READ; - WARN_ON(MV_MAX_Q_DEPTH <= qc->tag); - flags |= qc->tag << CRQB_TAG_SHIFT; - - /* get current queue index from hardware */ - in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS) - >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; - - pp->crqb[in_index].sg_addr = - cpu_to_le32(pp->sg_tbl_dma & 0xffffffff); - pp->crqb[in_index].sg_addr_hi = - cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16); - pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags); - - cw = &pp->crqb[in_index].ata_cmd[0]; - tf = &qc->tf; - - /* Sadly, the CRQB cannot accomodate all registers--there are - * only 11 bytes...so we must pick and choose required - * registers based on the command. So, we drop feature and - * hob_feature for [RW] DMA commands, but they are needed for - * NCQ. NCQ will drop hob_nsect. - */ - switch (tf->command) { - case ATA_CMD_READ: - case ATA_CMD_READ_EXT: - case ATA_CMD_WRITE: - case ATA_CMD_WRITE_EXT: - case ATA_CMD_WRITE_FUA_EXT: - mv_crqb_pack_cmd(cw++, tf->hob_nsect, ATA_REG_NSECT, 0); - break; -#ifdef LIBATA_NCQ /* FIXME: remove this line when NCQ added */ - case ATA_CMD_FPDMA_READ: - case ATA_CMD_FPDMA_WRITE: - mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0); - mv_crqb_pack_cmd(cw++, tf->feature, ATA_REG_FEATURE, 0); - break; -#endif /* FIXME: remove this line when NCQ added */ - default: - /* The only other commands EDMA supports in non-queued and - * non-NCQ mode are: [RW] STREAM DMA and W DMA FUA EXT, none - * of which are defined/used by Linux. If we get here, this - * driver needs work. - * - * FIXME: modify libata to give qc_prep a return value and - * return error here. - */ - BUG_ON(tf->command); - break; - } - mv_crqb_pack_cmd(cw++, tf->nsect, ATA_REG_NSECT, 0); - mv_crqb_pack_cmd(cw++, tf->hob_lbal, ATA_REG_LBAL, 0); - mv_crqb_pack_cmd(cw++, tf->lbal, ATA_REG_LBAL, 0); - mv_crqb_pack_cmd(cw++, tf->hob_lbam, ATA_REG_LBAM, 0); - mv_crqb_pack_cmd(cw++, tf->lbam, ATA_REG_LBAM, 0); - mv_crqb_pack_cmd(cw++, tf->hob_lbah, ATA_REG_LBAH, 0); - mv_crqb_pack_cmd(cw++, tf->lbah, ATA_REG_LBAH, 0); - mv_crqb_pack_cmd(cw++, tf->device, ATA_REG_DEVICE, 0); - mv_crqb_pack_cmd(cw++, tf->command, ATA_REG_CMD, 1); /* last */ - - if (!(qc->flags & ATA_QCFLAG_DMAMAP)) - return; - mv_fill_sg(qc); -} - -/** - * mv_qc_prep_iie - Host specific command preparation. - * @qc: queued command to prepare - * - * This routine simply redirects to the general purpose routine - * if command is not DMA. Else, it handles prep of the CRQB - * (command request block), does some sanity checking, and calls - * the SG load routine. - * - * LOCKING: - * Inherited from caller. - */ -static void mv_qc_prep_iie(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct mv_port_priv *pp = ap->private_data; - struct mv_crqb_iie *crqb; - struct ata_taskfile *tf; - unsigned in_index; - u32 flags = 0; - - if (ATA_PROT_DMA != qc->tf.protocol) - return; - - /* Fill in Gen IIE command request block - */ - if (!(qc->tf.flags & ATA_TFLAG_WRITE)) - flags |= CRQB_FLAG_READ; - - WARN_ON(MV_MAX_Q_DEPTH <= qc->tag); - flags |= qc->tag << CRQB_TAG_SHIFT; - - /* get current queue index from hardware */ - in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS) - >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; - - crqb = (struct mv_crqb_iie *) &pp->crqb[in_index]; - crqb->addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff); - crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16); - crqb->flags = cpu_to_le32(flags); - - tf = &qc->tf; - crqb->ata_cmd[0] = cpu_to_le32( - (tf->command << 16) | - (tf->feature << 24) - ); - crqb->ata_cmd[1] = cpu_to_le32( - (tf->lbal << 0) | - (tf->lbam << 8) | - (tf->lbah << 16) | - (tf->device << 24) - ); - crqb->ata_cmd[2] = cpu_to_le32( - (tf->hob_lbal << 0) | - (tf->hob_lbam << 8) | - (tf->hob_lbah << 16) | - (tf->hob_feature << 24) - ); - crqb->ata_cmd[3] = cpu_to_le32( - (tf->nsect << 0) | - (tf->hob_nsect << 8) - ); - - if (!(qc->flags & ATA_QCFLAG_DMAMAP)) - return; - mv_fill_sg(qc); -} - -/** - * mv_qc_issue - Initiate a command to the host - * @qc: queued command to start - * - * This routine simply redirects to the general purpose routine - * if command is not DMA. Else, it sanity checks our local - * caches of the request producer/consumer indices then enables - * DMA and bumps the request producer index. - * - * LOCKING: - * Inherited from caller. - */ -static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) -{ - void __iomem *port_mmio = mv_ap_base(qc->ap); - struct mv_port_priv *pp = qc->ap->private_data; - unsigned in_index; - u32 in_ptr; - - if (ATA_PROT_DMA != qc->tf.protocol) { - /* We're about to send a non-EDMA capable command to the - * port. Turn off EDMA so there won't be problems accessing - * shadow block, etc registers. - */ - mv_stop_dma(qc->ap); - return ata_qc_issue_prot(qc); - } - - in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS); - in_index = (in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; - - /* until we do queuing, the queue should be empty at this point */ - WARN_ON(in_index != ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) - >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK)); - - in_index = mv_inc_q_index(in_index); /* now incr producer index */ - - mv_start_dma(port_mmio, pp); - - /* and write the request in pointer to kick the EDMA to life */ - in_ptr &= EDMA_REQ_Q_BASE_LO_MASK; - in_ptr |= in_index << EDMA_REQ_Q_PTR_SHIFT; - writelfl(in_ptr, port_mmio + EDMA_REQ_Q_IN_PTR_OFS); - - return 0; -} - -/** - * mv_get_crpb_status - get status from most recently completed cmd - * @ap: ATA channel to manipulate - * - * This routine is for use when the port is in DMA mode, when it - * will be using the CRPB (command response block) method of - * returning command completion information. We check indices - * are good, grab status, and bump the response consumer index to - * prove that we're up to date. - * - * LOCKING: - * Inherited from caller. - */ -static u8 mv_get_crpb_status(struct ata_port *ap) -{ - void __iomem *port_mmio = mv_ap_base(ap); - struct mv_port_priv *pp = ap->private_data; - unsigned out_index; - u32 out_ptr; - u8 ata_status; - - out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); - out_index = (out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; - - ata_status = le16_to_cpu(pp->crpb[out_index].flags) - >> CRPB_FLAG_STATUS_SHIFT; - - /* increment our consumer index... */ - out_index = mv_inc_q_index(out_index); - - /* and, until we do NCQ, there should only be 1 CRPB waiting */ - WARN_ON(out_index != ((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) - >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK)); - - /* write out our inc'd consumer index so EDMA knows we're caught up */ - out_ptr &= EDMA_RSP_Q_BASE_LO_MASK; - out_ptr |= out_index << EDMA_RSP_Q_PTR_SHIFT; - writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); - - /* Return ATA status register for completed CRPB */ - return ata_status; -} - -/** - * mv_err_intr - Handle error interrupts on the port - * @ap: ATA channel to manipulate - * @reset_allowed: bool: 0 == don't trigger from reset here - * - * In most cases, just clear the interrupt and move on. However, - * some cases require an eDMA reset, which is done right before - * the COMRESET in mv_phy_reset(). The SERR case requires a - * clear of pending errors in the SATA SERROR register. Finally, - * if the port disabled DMA, update our cached copy to match. - * - * LOCKING: - * Inherited from caller. - */ -static void mv_err_intr(struct ata_port *ap, int reset_allowed) -{ - void __iomem *port_mmio = mv_ap_base(ap); - u32 edma_err_cause, serr = 0; - - edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); - - if (EDMA_ERR_SERR & edma_err_cause) { - sata_scr_read(ap, SCR_ERROR, &serr); - sata_scr_write_flush(ap, SCR_ERROR, serr); - } - if (EDMA_ERR_SELF_DIS & edma_err_cause) { - struct mv_port_priv *pp = ap->private_data; - pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; - } - DPRINTK(KERN_ERR "ata%u: port error; EDMA err cause: 0x%08x " - "SERR: 0x%08x\n", ap->id, edma_err_cause, serr); - - /* Clear EDMA now that SERR cleanup done */ - writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); - - /* check for fatal here and recover if needed */ - if (reset_allowed && (EDMA_ERR_FATAL & edma_err_cause)) - mv_stop_and_reset(ap); -} - -/** - * mv_host_intr - Handle all interrupts on the given host controller - * @host_set: host specific structure - * @relevant: port error bits relevant to this host controller - * @hc: which host controller we're to look at - * - * Read then write clear the HC interrupt status then walk each - * port connected to the HC and see if it needs servicing. Port - * success ints are reported in the HC interrupt status reg, the - * port error ints are reported in the higher level main - * interrupt status register and thus are passed in via the - * 'relevant' argument. - * - * LOCKING: - * Inherited from caller. - */ -static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, - unsigned int hc) -{ - void __iomem *mmio = host_set->mmio_base; - void __iomem *hc_mmio = mv_hc_base(mmio, hc); - struct ata_queued_cmd *qc; - u32 hc_irq_cause; - int shift, port, port0, hard_port, handled; - unsigned int err_mask; - - if (hc == 0) { - port0 = 0; - } else { - port0 = MV_PORTS_PER_HC; - } - - /* we'll need the HC success int register in most cases */ - hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS); - if (hc_irq_cause) { - writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); - } - - VPRINTK("ENTER, hc%u relevant=0x%08x HC IRQ cause=0x%08x\n", - hc,relevant,hc_irq_cause); - - for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) { - u8 ata_status = 0; - struct ata_port *ap = host_set->ports[port]; - struct mv_port_priv *pp = ap->private_data; - - hard_port = mv_hardport_from_port(port); /* range 0..3 */ - handled = 0; /* ensure ata_status is set if handled++ */ - - /* Note that DEV_IRQ might happen spuriously during EDMA, - * and should be ignored in such cases. - * The cause of this is still under investigation. - */ - if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) { - /* EDMA: check for response queue interrupt */ - if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause) { - ata_status = mv_get_crpb_status(ap); - handled = 1; - } - } else { - /* PIO: check for device (drive) interrupt */ - if ((DEV_IRQ << hard_port) & hc_irq_cause) { - ata_status = readb((void __iomem *) - ap->ioaddr.status_addr); - handled = 1; - /* ignore spurious intr if drive still BUSY */ - if (ata_status & ATA_BUSY) { - ata_status = 0; - handled = 0; - } - } - } - - if (ap && (ap->flags & ATA_FLAG_DISABLED)) - continue; - - err_mask = ac_err_mask(ata_status); - - shift = port << 1; /* (port * 2) */ - if (port >= MV_PORTS_PER_HC) { - shift++; /* skip bit 8 in the HC Main IRQ reg */ - } - if ((PORT0_ERR << shift) & relevant) { - mv_err_intr(ap, 1); - err_mask |= AC_ERR_OTHER; - handled = 1; - } - - if (handled) { - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (qc->flags & ATA_QCFLAG_ACTIVE)) { - VPRINTK("port %u IRQ found for qc, " - "ata_status 0x%x\n", port,ata_status); - /* mark qc status appropriately */ - if (!(qc->tf.flags & ATA_TFLAG_POLLING)) { - qc->err_mask |= err_mask; - ata_qc_complete(qc); - } - } - } - } - VPRINTK("EXIT\n"); -} - -/** - * mv_interrupt - - * @irq: unused - * @dev_instance: private data; in this case the host structure - * @regs: unused - * - * Read the read only register to determine if any host - * controllers have pending interrupts. If so, call lower level - * routine to handle. Also check for PCI errors which are only - * reported here. - * - * LOCKING: - * This routine holds the host_set lock while processing pending - * interrupts. - */ -static irqreturn_t mv_interrupt(int irq, void *dev_instance, - struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - unsigned int hc, handled = 0, n_hcs; - void __iomem *mmio = host_set->mmio_base; - struct mv_host_priv *hpriv; - u32 irq_stat; - - irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS); - - /* check the cases where we either have nothing pending or have read - * a bogus register value which can indicate HW removal or PCI fault - */ - if (!irq_stat || (0xffffffffU == irq_stat)) { - return IRQ_NONE; - } - - n_hcs = mv_get_hc_count(host_set->ports[0]->flags); - spin_lock(&host_set->lock); - - for (hc = 0; hc < n_hcs; hc++) { - u32 relevant = irq_stat & (HC0_IRQ_PEND << (hc * HC_SHIFT)); - if (relevant) { - mv_host_intr(host_set, relevant, hc); - handled++; - } - } - - hpriv = host_set->private_data; - if (IS_60XX(hpriv)) { - /* deal with the interrupt coalescing bits */ - if (irq_stat & (TRAN_LO_DONE | TRAN_HI_DONE | PORTS_0_7_COAL_DONE)) { - writelfl(0, mmio + MV_IRQ_COAL_CAUSE_LO); - writelfl(0, mmio + MV_IRQ_COAL_CAUSE_HI); - writelfl(0, mmio + MV_IRQ_COAL_CAUSE); - } - } - - if (PCI_ERR & irq_stat) { - printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n", - readl(mmio + PCI_IRQ_CAUSE_OFS)); - - DPRINTK("All regs @ PCI error\n"); - mv_dump_all_regs(mmio, -1, to_pci_dev(host_set->dev)); - - writelfl(0, mmio + PCI_IRQ_CAUSE_OFS); - handled++; - } - spin_unlock(&host_set->lock); - - return IRQ_RETVAL(handled); -} - -static void __iomem *mv5_phy_base(void __iomem *mmio, unsigned int port) -{ - void __iomem *hc_mmio = mv_hc_base_from_port(mmio, port); - unsigned long ofs = (mv_hardport_from_port(port) + 1) * 0x100UL; - - return hc_mmio + ofs; -} - -static unsigned int mv5_scr_offset(unsigned int sc_reg_in) -{ - unsigned int ofs; - - switch (sc_reg_in) { - case SCR_STATUS: - case SCR_ERROR: - case SCR_CONTROL: - ofs = sc_reg_in * sizeof(u32); - break; - default: - ofs = 0xffffffffU; - break; - } - return ofs; -} - -static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in) -{ - void __iomem *mmio = mv5_phy_base(ap->host_set->mmio_base, ap->port_no); - unsigned int ofs = mv5_scr_offset(sc_reg_in); - - if (ofs != 0xffffffffU) - return readl(mmio + ofs); - else - return (u32) ofs; -} - -static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) -{ - void __iomem *mmio = mv5_phy_base(ap->host_set->mmio_base, ap->port_no); - unsigned int ofs = mv5_scr_offset(sc_reg_in); - - if (ofs != 0xffffffffU) - writelfl(val, mmio + ofs); -} - -static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio) -{ - u8 rev_id; - int early_5080; - - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id); - - early_5080 = (pdev->device == 0x5080) && (rev_id == 0); - - if (!early_5080) { - u32 tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL); - tmp |= (1 << 0); - writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL); - } - - mv_reset_pci_bus(pdev, mmio); -} - -static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio) -{ - writel(0x0fcfffff, mmio + MV_FLASH_CTL); -} - -static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx, - void __iomem *mmio) -{ - void __iomem *phy_mmio = mv5_phy_base(mmio, idx); - u32 tmp; - - tmp = readl(phy_mmio + MV5_PHY_MODE); - - hpriv->signal[idx].pre = tmp & 0x1800; /* bits 12:11 */ - hpriv->signal[idx].amps = tmp & 0xe0; /* bits 7:5 */ -} - -static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio) -{ - u32 tmp; - - writel(0, mmio + MV_GPIO_PORT_CTL); - - /* FIXME: handle MV_HP_ERRATA_50XXB2 errata */ - - tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL); - tmp |= ~(1 << 0); - writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL); -} - -static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int port) -{ - void __iomem *phy_mmio = mv5_phy_base(mmio, port); - const u32 mask = (1<<12) | (1<<11) | (1<<7) | (1<<6) | (1<<5); - u32 tmp; - int fix_apm_sq = (hpriv->hp_flags & MV_HP_ERRATA_50XXB0); - - if (fix_apm_sq) { - tmp = readl(phy_mmio + MV5_LT_MODE); - tmp |= (1 << 19); - writel(tmp, phy_mmio + MV5_LT_MODE); - - tmp = readl(phy_mmio + MV5_PHY_CTL); - tmp &= ~0x3; - tmp |= 0x1; - writel(tmp, phy_mmio + MV5_PHY_CTL); - } - - tmp = readl(phy_mmio + MV5_PHY_MODE); - tmp &= ~mask; - tmp |= hpriv->signal[port].pre; - tmp |= hpriv->signal[port].amps; - writel(tmp, phy_mmio + MV5_PHY_MODE); -} - - -#undef ZERO -#define ZERO(reg) writel(0, port_mmio + (reg)) -static void mv5_reset_hc_port(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int port) -{ - void __iomem *port_mmio = mv_port_base(mmio, port); - - writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS); - - mv_channel_reset(hpriv, mmio, port); - - ZERO(0x028); /* command */ - writel(0x11f, port_mmio + EDMA_CFG_OFS); - ZERO(0x004); /* timer */ - ZERO(0x008); /* irq err cause */ - ZERO(0x00c); /* irq err mask */ - ZERO(0x010); /* rq bah */ - ZERO(0x014); /* rq inp */ - ZERO(0x018); /* rq outp */ - ZERO(0x01c); /* respq bah */ - ZERO(0x024); /* respq outp */ - ZERO(0x020); /* respq inp */ - ZERO(0x02c); /* test control */ - writel(0xbc, port_mmio + EDMA_IORDY_TMOUT); -} -#undef ZERO - -#define ZERO(reg) writel(0, hc_mmio + (reg)) -static void mv5_reset_one_hc(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int hc) -{ - void __iomem *hc_mmio = mv_hc_base(mmio, hc); - u32 tmp; - - ZERO(0x00c); - ZERO(0x010); - ZERO(0x014); - ZERO(0x018); - - tmp = readl(hc_mmio + 0x20); - tmp &= 0x1c1c1c1c; - tmp |= 0x03030303; - writel(tmp, hc_mmio + 0x20); -} -#undef ZERO - -static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int n_hc) -{ - unsigned int hc, port; - - for (hc = 0; hc < n_hc; hc++) { - for (port = 0; port < MV_PORTS_PER_HC; port++) - mv5_reset_hc_port(hpriv, mmio, - (hc * MV_PORTS_PER_HC) + port); - - mv5_reset_one_hc(hpriv, mmio, hc); - } - - return 0; -} - -#undef ZERO -#define ZERO(reg) writel(0, mmio + (reg)) -static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio) -{ - u32 tmp; - - tmp = readl(mmio + MV_PCI_MODE); - tmp &= 0xff00ffff; - writel(tmp, mmio + MV_PCI_MODE); - - ZERO(MV_PCI_DISC_TIMER); - ZERO(MV_PCI_MSI_TRIGGER); - writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT); - ZERO(HC_MAIN_IRQ_MASK_OFS); - ZERO(MV_PCI_SERR_MASK); - ZERO(PCI_IRQ_CAUSE_OFS); - ZERO(PCI_IRQ_MASK_OFS); - ZERO(MV_PCI_ERR_LOW_ADDRESS); - ZERO(MV_PCI_ERR_HIGH_ADDRESS); - ZERO(MV_PCI_ERR_ATTRIBUTE); - ZERO(MV_PCI_ERR_COMMAND); -} -#undef ZERO - -static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio) -{ - u32 tmp; - - mv5_reset_flash(hpriv, mmio); - - tmp = readl(mmio + MV_GPIO_PORT_CTL); - tmp &= 0x3; - tmp |= (1 << 5) | (1 << 6); - writel(tmp, mmio + MV_GPIO_PORT_CTL); -} - -/** - * mv6_reset_hc - Perform the 6xxx global soft reset - * @mmio: base address of the HBA - * - * This routine only applies to 6xxx parts. - * - * LOCKING: - * Inherited from caller. - */ -static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int n_hc) -{ - void __iomem *reg = mmio + PCI_MAIN_CMD_STS_OFS; - int i, rc = 0; - u32 t; - - /* Following procedure defined in PCI "main command and status - * register" table. - */ - t = readl(reg); - writel(t | STOP_PCI_MASTER, reg); - - for (i = 0; i < 1000; i++) { - udelay(1); - t = readl(reg); - if (PCI_MASTER_EMPTY & t) { - break; - } - } - if (!(PCI_MASTER_EMPTY & t)) { - printk(KERN_ERR DRV_NAME ": PCI master won't flush\n"); - rc = 1; - goto done; - } - - /* set reset */ - i = 5; - do { - writel(t | GLOB_SFT_RST, reg); - t = readl(reg); - udelay(1); - } while (!(GLOB_SFT_RST & t) && (i-- > 0)); - - if (!(GLOB_SFT_RST & t)) { - printk(KERN_ERR DRV_NAME ": can't set global reset\n"); - rc = 1; - goto done; - } - - /* clear reset and *reenable the PCI master* (not mentioned in spec) */ - i = 5; - do { - writel(t & ~(GLOB_SFT_RST | STOP_PCI_MASTER), reg); - t = readl(reg); - udelay(1); - } while ((GLOB_SFT_RST & t) && (i-- > 0)); - - if (GLOB_SFT_RST & t) { - printk(KERN_ERR DRV_NAME ": can't clear global reset\n"); - rc = 1; - } -done: - return rc; -} - -static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx, - void __iomem *mmio) -{ - void __iomem *port_mmio; - u32 tmp; - - tmp = readl(mmio + MV_RESET_CFG); - if ((tmp & (1 << 0)) == 0) { - hpriv->signal[idx].amps = 0x7 << 8; - hpriv->signal[idx].pre = 0x1 << 5; - return; - } - - port_mmio = mv_port_base(mmio, idx); - tmp = readl(port_mmio + PHY_MODE2); - - hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */ - hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */ -} - -static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio) -{ - writel(0x00000060, mmio + MV_GPIO_PORT_CTL); -} - -static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int port) -{ - void __iomem *port_mmio = mv_port_base(mmio, port); - - u32 hp_flags = hpriv->hp_flags; - int fix_phy_mode2 = - hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0); - int fix_phy_mode4 = - hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0); - u32 m2, tmp; - - if (fix_phy_mode2) { - m2 = readl(port_mmio + PHY_MODE2); - m2 &= ~(1 << 16); - m2 |= (1 << 31); - writel(m2, port_mmio + PHY_MODE2); - - udelay(200); - - m2 = readl(port_mmio + PHY_MODE2); - m2 &= ~((1 << 16) | (1 << 31)); - writel(m2, port_mmio + PHY_MODE2); - - udelay(200); - } - - /* who knows what this magic does */ - tmp = readl(port_mmio + PHY_MODE3); - tmp &= ~0x7F800000; - tmp |= 0x2A800000; - writel(tmp, port_mmio + PHY_MODE3); - - if (fix_phy_mode4) { - u32 m4; - - m4 = readl(port_mmio + PHY_MODE4); - - if (hp_flags & MV_HP_ERRATA_60X1B2) - tmp = readl(port_mmio + 0x310); - - m4 = (m4 & ~(1 << 1)) | (1 << 0); - - writel(m4, port_mmio + PHY_MODE4); - - if (hp_flags & MV_HP_ERRATA_60X1B2) - writel(tmp, port_mmio + 0x310); - } - - /* Revert values of pre-emphasis and signal amps to the saved ones */ - m2 = readl(port_mmio + PHY_MODE2); - - m2 &= ~MV_M2_PREAMP_MASK; - m2 |= hpriv->signal[port].amps; - m2 |= hpriv->signal[port].pre; - m2 &= ~(1 << 16); - - /* according to mvSata 3.6.1, some IIE values are fixed */ - if (IS_GEN_IIE(hpriv)) { - m2 &= ~0xC30FF01F; - m2 |= 0x0000900F; - } - - writel(m2, port_mmio + PHY_MODE2); -} - -static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int port_no) -{ - void __iomem *port_mmio = mv_port_base(mmio, port_no); - - writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS); - - if (IS_60XX(hpriv)) { - u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL); - ifctl |= (1 << 7); /* enable gen2i speed */ - ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */ - writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL); - } - - udelay(25); /* allow reset propagation */ - - /* Spec never mentions clearing the bit. Marvell's driver does - * clear the bit, however. - */ - writelfl(0, port_mmio + EDMA_CMD_OFS); - - hpriv->ops->phy_errata(hpriv, mmio, port_no); - - if (IS_50XX(hpriv)) - mdelay(1); -} - -static void mv_stop_and_reset(struct ata_port *ap) -{ - struct mv_host_priv *hpriv = ap->host_set->private_data; - void __iomem *mmio = ap->host_set->mmio_base; - - mv_stop_dma(ap); - - mv_channel_reset(hpriv, mmio, ap->port_no); - - __mv_phy_reset(ap, 0); -} - -static inline void __msleep(unsigned int msec, int can_sleep) -{ - if (can_sleep) - msleep(msec); - else - mdelay(msec); -} - -/** - * __mv_phy_reset - Perform eDMA reset followed by COMRESET - * @ap: ATA channel to manipulate - * - * Part of this is taken from __sata_phy_reset and modified to - * not sleep since this routine gets called from interrupt level. - * - * LOCKING: - * Inherited from caller. This is coded to safe to call at - * interrupt level, i.e. it does not sleep. - */ -static void __mv_phy_reset(struct ata_port *ap, int can_sleep) -{ - struct mv_port_priv *pp = ap->private_data; - struct mv_host_priv *hpriv = ap->host_set->private_data; - void __iomem *port_mmio = mv_ap_base(ap); - struct ata_taskfile tf; - struct ata_device *dev = &ap->device[0]; - unsigned long timeout; - int retry = 5; - u32 sstatus; - - VPRINTK("ENTER, port %u, mmio 0x%p\n", ap->port_no, port_mmio); - - DPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x " - "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), - mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); - - /* Issue COMRESET via SControl */ -comreset_retry: - sata_scr_write_flush(ap, SCR_CONTROL, 0x301); - __msleep(1, can_sleep); - - sata_scr_write_flush(ap, SCR_CONTROL, 0x300); - __msleep(20, can_sleep); - - timeout = jiffies + msecs_to_jiffies(200); - do { - sata_scr_read(ap, SCR_STATUS, &sstatus); - sstatus &= 0x3; - if ((sstatus == 3) || (sstatus == 0)) - break; - - __msleep(1, can_sleep); - } while (time_before(jiffies, timeout)); - - /* work around errata */ - if (IS_60XX(hpriv) && - (sstatus != 0x0) && (sstatus != 0x113) && (sstatus != 0x123) && - (retry-- > 0)) - goto comreset_retry; - - DPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x " - "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), - mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); - - if (ata_port_online(ap)) { - ata_port_probe(ap); - } else { - sata_scr_read(ap, SCR_STATUS, &sstatus); - ata_port_printk(ap, KERN_INFO, - "no device found (phy stat %08x)\n", sstatus); - ata_port_disable(ap); - return; - } - ap->cbl = ATA_CBL_SATA; - - /* even after SStatus reflects that device is ready, - * it seems to take a while for link to be fully - * established (and thus Status no longer 0x80/0x7F), - * so we poll a bit for that, here. - */ - retry = 20; - while (1) { - u8 drv_stat = ata_check_status(ap); - if ((drv_stat != 0x80) && (drv_stat != 0x7f)) - break; - __msleep(500, can_sleep); - if (retry-- <= 0) - break; - } - - tf.lbah = readb((void __iomem *) ap->ioaddr.lbah_addr); - tf.lbam = readb((void __iomem *) ap->ioaddr.lbam_addr); - tf.lbal = readb((void __iomem *) ap->ioaddr.lbal_addr); - tf.nsect = readb((void __iomem *) ap->ioaddr.nsect_addr); - - dev->class = ata_dev_classify(&tf); - if (!ata_dev_enabled(dev)) { - VPRINTK("Port disabled post-sig: No device present.\n"); - ata_port_disable(ap); - } - - writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); - - pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; - - VPRINTK("EXIT\n"); -} - -static void mv_phy_reset(struct ata_port *ap) -{ - __mv_phy_reset(ap, 1); -} - -/** - * mv_eng_timeout - Routine called by libata when SCSI times out I/O - * @ap: ATA channel to manipulate - * - * Intent is to clear all pending error conditions, reset the - * chip/bus, fail the command, and move on. - * - * LOCKING: - * This routine holds the host_set lock while failing the command. - */ -static void mv_eng_timeout(struct ata_port *ap) -{ - struct ata_queued_cmd *qc; - unsigned long flags; - - ata_port_printk(ap, KERN_ERR, "Entering mv_eng_timeout\n"); - DPRINTK("All regs @ start of eng_timeout\n"); - mv_dump_all_regs(ap->host_set->mmio_base, ap->port_no, - to_pci_dev(ap->host_set->dev)); - - qc = ata_qc_from_tag(ap, ap->active_tag); - printk(KERN_ERR "mmio_base %p ap %p qc %p scsi_cmnd %p &cmnd %p\n", - ap->host_set->mmio_base, ap, qc, qc->scsicmd, - &qc->scsicmd->cmnd); - - spin_lock_irqsave(&ap->host_set->lock, flags); - mv_err_intr(ap, 0); - mv_stop_and_reset(ap); - spin_unlock_irqrestore(&ap->host_set->lock, flags); - - WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); - if (qc->flags & ATA_QCFLAG_ACTIVE) { - qc->err_mask |= AC_ERR_TIMEOUT; - ata_eh_qc_complete(qc); - } -} - -/** - * mv_port_init - Perform some early initialization on a single port. - * @port: libata data structure storing shadow register addresses - * @port_mmio: base address of the port - * - * Initialize shadow register mmio addresses, clear outstanding - * interrupts on the port, and unmask interrupts for the future - * start of the port. - * - * LOCKING: - * Inherited from caller. - */ -static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) -{ - unsigned long shd_base = (unsigned long) port_mmio + SHD_BLK_OFS; - unsigned serr_ofs; - - /* PIO related setup - */ - port->data_addr = shd_base + (sizeof(u32) * ATA_REG_DATA); - port->error_addr = - port->feature_addr = shd_base + (sizeof(u32) * ATA_REG_ERR); - port->nsect_addr = shd_base + (sizeof(u32) * ATA_REG_NSECT); - port->lbal_addr = shd_base + (sizeof(u32) * ATA_REG_LBAL); - port->lbam_addr = shd_base + (sizeof(u32) * ATA_REG_LBAM); - port->lbah_addr = shd_base + (sizeof(u32) * ATA_REG_LBAH); - port->device_addr = shd_base + (sizeof(u32) * ATA_REG_DEVICE); - port->status_addr = - port->command_addr = shd_base + (sizeof(u32) * ATA_REG_STATUS); - /* special case: control/altstatus doesn't have ATA_REG_ address */ - port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST_OFS; - - /* unused: */ - port->cmd_addr = port->bmdma_addr = port->scr_addr = 0; - - /* Clear any currently outstanding port interrupt conditions */ - serr_ofs = mv_scr_offset(SCR_ERROR); - writelfl(readl(port_mmio + serr_ofs), port_mmio + serr_ofs); - writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); - - /* unmask all EDMA error interrupts */ - writelfl(~0, port_mmio + EDMA_ERR_IRQ_MASK_OFS); - - VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n", - readl(port_mmio + EDMA_CFG_OFS), - readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS), - readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS)); -} - -static int mv_chip_id(struct pci_dev *pdev, struct mv_host_priv *hpriv, - unsigned int board_idx) -{ - u8 rev_id; - u32 hp_flags = hpriv->hp_flags; - - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id); - - switch(board_idx) { - case chip_5080: - hpriv->ops = &mv5xxx_ops; - hp_flags |= MV_HP_50XX; - - switch (rev_id) { - case 0x1: - hp_flags |= MV_HP_ERRATA_50XXB0; - break; - case 0x3: - hp_flags |= MV_HP_ERRATA_50XXB2; - break; - default: - dev_printk(KERN_WARNING, &pdev->dev, - "Applying 50XXB2 workarounds to unknown rev\n"); - hp_flags |= MV_HP_ERRATA_50XXB2; - break; - } - break; - - case chip_504x: - case chip_508x: - hpriv->ops = &mv5xxx_ops; - hp_flags |= MV_HP_50XX; - - switch (rev_id) { - case 0x0: - hp_flags |= MV_HP_ERRATA_50XXB0; - break; - case 0x3: - hp_flags |= MV_HP_ERRATA_50XXB2; - break; - default: - dev_printk(KERN_WARNING, &pdev->dev, - "Applying B2 workarounds to unknown rev\n"); - hp_flags |= MV_HP_ERRATA_50XXB2; - break; - } - break; - - case chip_604x: - case chip_608x: - hpriv->ops = &mv6xxx_ops; - - switch (rev_id) { - case 0x7: - hp_flags |= MV_HP_ERRATA_60X1B2; - break; - case 0x9: - hp_flags |= MV_HP_ERRATA_60X1C0; - break; - default: - dev_printk(KERN_WARNING, &pdev->dev, - "Applying B2 workarounds to unknown rev\n"); - hp_flags |= MV_HP_ERRATA_60X1B2; - break; - } - break; - - case chip_7042: - case chip_6042: - hpriv->ops = &mv6xxx_ops; - - hp_flags |= MV_HP_GEN_IIE; - - switch (rev_id) { - case 0x0: - hp_flags |= MV_HP_ERRATA_XX42A0; - break; - case 0x1: - hp_flags |= MV_HP_ERRATA_60X1C0; - break; - default: - dev_printk(KERN_WARNING, &pdev->dev, - "Applying 60X1C0 workarounds to unknown rev\n"); - hp_flags |= MV_HP_ERRATA_60X1C0; - break; - } - break; - - default: - printk(KERN_ERR DRV_NAME ": BUG: invalid board index %u\n", board_idx); - return 1; - } - - hpriv->hp_flags = hp_flags; - - return 0; -} - -/** - * mv_init_host - Perform some early initialization of the host. - * @pdev: host PCI device - * @probe_ent: early data struct representing the host - * - * If possible, do an early global reset of the host. Then do - * our port init and clear/unmask all/relevant host interrupts. - * - * LOCKING: - * Inherited from caller. - */ -static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent, - unsigned int board_idx) -{ - int rc = 0, n_hc, port, hc; - void __iomem *mmio = probe_ent->mmio_base; - struct mv_host_priv *hpriv = probe_ent->private_data; - - /* global interrupt mask */ - writel(0, mmio + HC_MAIN_IRQ_MASK_OFS); - - rc = mv_chip_id(pdev, hpriv, board_idx); - if (rc) - goto done; - - n_hc = mv_get_hc_count(probe_ent->host_flags); - probe_ent->n_ports = MV_PORTS_PER_HC * n_hc; - - for (port = 0; port < probe_ent->n_ports; port++) - hpriv->ops->read_preamp(hpriv, port, mmio); - - rc = hpriv->ops->reset_hc(hpriv, mmio, n_hc); - if (rc) - goto done; - - hpriv->ops->reset_flash(hpriv, mmio); - hpriv->ops->reset_bus(pdev, mmio); - hpriv->ops->enable_leds(hpriv, mmio); - - for (port = 0; port < probe_ent->n_ports; port++) { - if (IS_60XX(hpriv)) { - void __iomem *port_mmio = mv_port_base(mmio, port); - - u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL); - ifctl |= (1 << 7); /* enable gen2i speed */ - ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */ - writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL); - } - - hpriv->ops->phy_errata(hpriv, mmio, port); - } - - for (port = 0; port < probe_ent->n_ports; port++) { - void __iomem *port_mmio = mv_port_base(mmio, port); - mv_port_init(&probe_ent->port[port], port_mmio); - } - - for (hc = 0; hc < n_hc; hc++) { - void __iomem *hc_mmio = mv_hc_base(mmio, hc); - - VPRINTK("HC%i: HC config=0x%08x HC IRQ cause " - "(before clear)=0x%08x\n", hc, - readl(hc_mmio + HC_CFG_OFS), - readl(hc_mmio + HC_IRQ_CAUSE_OFS)); - - /* Clear any currently outstanding hc interrupt conditions */ - writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS); - } - - /* Clear any currently outstanding host interrupt conditions */ - writelfl(0, mmio + PCI_IRQ_CAUSE_OFS); - - /* and unmask interrupt generation for host regs */ - writelfl(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS); - writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS); - - VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x " - "PCI int cause/mask=0x%08x/0x%08x\n", - readl(mmio + HC_MAIN_IRQ_CAUSE_OFS), - readl(mmio + HC_MAIN_IRQ_MASK_OFS), - readl(mmio + PCI_IRQ_CAUSE_OFS), - readl(mmio + PCI_IRQ_MASK_OFS)); - -done: - return rc; -} - -/** - * mv_print_info - Dump key info to kernel log for perusal. - * @probe_ent: early data struct representing the host - * - * FIXME: complete this. - * - * LOCKING: - * Inherited from caller. - */ -static void mv_print_info(struct ata_probe_ent *probe_ent) -{ - struct pci_dev *pdev = to_pci_dev(probe_ent->dev); - struct mv_host_priv *hpriv = probe_ent->private_data; - u8 rev_id, scc; - const char *scc_s; - - /* Use this to determine the HW stepping of the chip so we know - * what errata to workaround - */ - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id); - - pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &scc); - if (scc == 0) - scc_s = "SCSI"; - else if (scc == 0x01) - scc_s = "RAID"; - else - scc_s = "unknown"; - - dev_printk(KERN_INFO, &pdev->dev, - "%u slots %u ports %s mode IRQ via %s\n", - (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports, - scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx"); -} - -/** - * mv_init_one - handle a positive probe of a Marvell host - * @pdev: PCI device found - * @ent: PCI device ID entry for the matched host - * - * LOCKING: - * Inherited from caller. - */ -static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int printed_version = 0; - struct ata_probe_ent *probe_ent = NULL; - struct mv_host_priv *hpriv; - unsigned int board_idx = (unsigned int)ent->driver_data; - void __iomem *mmio_base; - int pci_dev_busy = 0, rc; - - if (!printed_version++) - dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) { - return rc; - } - pci_set_master(pdev); - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - pci_dev_busy = 1; - goto err_out; - } - - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); - if (probe_ent == NULL) { - rc = -ENOMEM; - goto err_out_regions; - } - - memset(probe_ent, 0, sizeof(*probe_ent)); - probe_ent->dev = pci_dev_to_dev(pdev); - INIT_LIST_HEAD(&probe_ent->node); - - mmio_base = pci_iomap(pdev, MV_PRIMARY_BAR, 0); - if (mmio_base == NULL) { - rc = -ENOMEM; - goto err_out_free_ent; - } - - hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL); - if (!hpriv) { - rc = -ENOMEM; - goto err_out_iounmap; - } - memset(hpriv, 0, sizeof(*hpriv)); - - probe_ent->sht = mv_port_info[board_idx].sht; - probe_ent->host_flags = mv_port_info[board_idx].host_flags; - probe_ent->pio_mask = mv_port_info[board_idx].pio_mask; - probe_ent->udma_mask = mv_port_info[board_idx].udma_mask; - probe_ent->port_ops = mv_port_info[board_idx].port_ops; - - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = IRQF_SHARED; - probe_ent->mmio_base = mmio_base; - probe_ent->private_data = hpriv; - - /* initialize adapter */ - rc = mv_init_host(pdev, probe_ent, board_idx); - if (rc) { - goto err_out_hpriv; - } - - /* Enable interrupts */ - if (msi && pci_enable_msi(pdev) == 0) { - hpriv->hp_flags |= MV_HP_FLAG_MSI; - } else { - pci_intx(pdev, 1); - } - - mv_dump_pci_cfg(pdev, 0x68); - mv_print_info(probe_ent); - - if (ata_device_add(probe_ent) == 0) { - rc = -ENODEV; /* No devices discovered */ - goto err_out_dev_add; - } - - kfree(probe_ent); - return 0; - -err_out_dev_add: - if (MV_HP_FLAG_MSI & hpriv->hp_flags) { - pci_disable_msi(pdev); - } else { - pci_intx(pdev, 0); - } -err_out_hpriv: - kfree(hpriv); -err_out_iounmap: - pci_iounmap(pdev, mmio_base); -err_out_free_ent: - kfree(probe_ent); -err_out_regions: - pci_release_regions(pdev); -err_out: - if (!pci_dev_busy) { - pci_disable_device(pdev); - } - - return rc; -} - -static int __init mv_init(void) -{ - return pci_register_driver(&mv_pci_driver); -} - -static void __exit mv_exit(void) -{ - pci_unregister_driver(&mv_pci_driver); -} - -MODULE_AUTHOR("Brett Russ"); -MODULE_DESCRIPTION("SCSI low-level driver for Marvell SATA controllers"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, mv_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -module_param(msi, int, 0444); -MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)"); - -module_init(mv_init); -module_exit(mv_exit); diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c deleted file mode 100644 index be46df75ab5..00000000000 --- a/drivers/scsi/sata_nv.c +++ /dev/null @@ -1,595 +0,0 @@ -/* - * sata_nv.c - NVIDIA nForce SATA - * - * Copyright 2004 NVIDIA Corp. All rights reserved. - * Copyright 2004 Andrew Chew - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * No hardware documentation available outside of NVIDIA. - * This driver programs the NVIDIA SATA controller in a similar - * fashion as with other PCI IDE BMDMA controllers, with a few - * NV-specific details such as register offsets, SATA phy location, - * hotplug info, etc. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "sata_nv" -#define DRV_VERSION "2.0" - -enum { - NV_PORTS = 2, - NV_PIO_MASK = 0x1f, - NV_MWDMA_MASK = 0x07, - NV_UDMA_MASK = 0x7f, - NV_PORT0_SCR_REG_OFFSET = 0x00, - NV_PORT1_SCR_REG_OFFSET = 0x40, - - /* INT_STATUS/ENABLE */ - NV_INT_STATUS = 0x10, - NV_INT_ENABLE = 0x11, - NV_INT_STATUS_CK804 = 0x440, - NV_INT_ENABLE_CK804 = 0x441, - - /* INT_STATUS/ENABLE bits */ - NV_INT_DEV = 0x01, - NV_INT_PM = 0x02, - NV_INT_ADDED = 0x04, - NV_INT_REMOVED = 0x08, - - NV_INT_PORT_SHIFT = 4, /* each port occupies 4 bits */ - - NV_INT_ALL = 0x0f, - NV_INT_MASK = NV_INT_DEV | - NV_INT_ADDED | NV_INT_REMOVED, - - /* INT_CONFIG */ - NV_INT_CONFIG = 0x12, - NV_INT_CONFIG_METHD = 0x01, // 0 = INT, 1 = SMI - - // For PCI config register 20 - NV_MCP_SATA_CFG_20 = 0x50, - NV_MCP_SATA_CFG_20_SATA_SPACE_EN = 0x04, -}; - -static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static void nv_ck804_host_stop(struct ata_host_set *host_set); -static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance, - struct pt_regs *regs); -static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance, - struct pt_regs *regs); -static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance, - struct pt_regs *regs); -static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg); -static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); - -static void nv_nf2_freeze(struct ata_port *ap); -static void nv_nf2_thaw(struct ata_port *ap); -static void nv_ck804_freeze(struct ata_port *ap); -static void nv_ck804_thaw(struct ata_port *ap); -static void nv_error_handler(struct ata_port *ap); - -enum nv_host_type -{ - GENERIC, - NFORCE2, - NFORCE3 = NFORCE2, /* NF2 == NF3 as far as sata_nv is concerned */ - CK804 -}; - -static const struct pci_device_id nv_pci_tbl[] = { - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, NFORCE2 }, - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, NFORCE3 }, - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, NFORCE3 }, - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 }, - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 }, - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 }, - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 }, - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, - { PCI_VENDOR_ID_NVIDIA, 0x045c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, - { PCI_VENDOR_ID_NVIDIA, 0x045d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, - { PCI_VENDOR_ID_NVIDIA, 0x045e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, - { PCI_VENDOR_ID_NVIDIA, 0x045f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, - { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, - PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC }, - { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, - PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_STORAGE_RAID<<8, 0xffff00, GENERIC }, - { 0, } /* terminate list */ -}; - -static struct pci_driver nv_pci_driver = { - .name = DRV_NAME, - .id_table = nv_pci_tbl, - .probe = nv_init_one, - .remove = ata_pci_remove_one, -}; - -static struct scsi_host_template nv_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, -}; - -static const struct ata_port_operations nv_generic_ops = { - .port_disable = ata_port_disable, - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .exec_command = ata_exec_command, - .check_status = ata_check_status, - .dev_select = ata_std_dev_select, - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = nv_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - .data_xfer = ata_pio_data_xfer, - .irq_handler = nv_generic_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .scr_read = nv_scr_read, - .scr_write = nv_scr_write, - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_pci_host_stop, -}; - -static const struct ata_port_operations nv_nf2_ops = { - .port_disable = ata_port_disable, - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .exec_command = ata_exec_command, - .check_status = ata_check_status, - .dev_select = ata_std_dev_select, - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - .freeze = nv_nf2_freeze, - .thaw = nv_nf2_thaw, - .error_handler = nv_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - .data_xfer = ata_pio_data_xfer, - .irq_handler = nv_nf2_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .scr_read = nv_scr_read, - .scr_write = nv_scr_write, - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_pci_host_stop, -}; - -static const struct ata_port_operations nv_ck804_ops = { - .port_disable = ata_port_disable, - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .exec_command = ata_exec_command, - .check_status = ata_check_status, - .dev_select = ata_std_dev_select, - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - .freeze = nv_ck804_freeze, - .thaw = nv_ck804_thaw, - .error_handler = nv_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - .data_xfer = ata_pio_data_xfer, - .irq_handler = nv_ck804_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .scr_read = nv_scr_read, - .scr_write = nv_scr_write, - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = nv_ck804_host_stop, -}; - -static struct ata_port_info nv_port_info[] = { - /* generic */ - { - .sht = &nv_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, - .pio_mask = NV_PIO_MASK, - .mwdma_mask = NV_MWDMA_MASK, - .udma_mask = NV_UDMA_MASK, - .port_ops = &nv_generic_ops, - }, - /* nforce2/3 */ - { - .sht = &nv_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, - .pio_mask = NV_PIO_MASK, - .mwdma_mask = NV_MWDMA_MASK, - .udma_mask = NV_UDMA_MASK, - .port_ops = &nv_nf2_ops, - }, - /* ck804 */ - { - .sht = &nv_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, - .pio_mask = NV_PIO_MASK, - .mwdma_mask = NV_MWDMA_MASK, - .udma_mask = NV_UDMA_MASK, - .port_ops = &nv_ck804_ops, - }, -}; - -MODULE_AUTHOR("NVIDIA"); -MODULE_DESCRIPTION("low-level driver for NVIDIA nForce SATA controller"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, nv_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance, - struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - unsigned int i; - unsigned int handled = 0; - unsigned long flags; - - spin_lock_irqsave(&host_set->lock, flags); - - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap; - - ap = host_set->ports[i]; - if (ap && - !(ap->flags & ATA_FLAG_DISABLED)) { - struct ata_queued_cmd *qc; - - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) - handled += ata_host_intr(ap, qc); - else - // No request pending? Clear interrupt status - // anyway, in case there's one pending. - ap->ops->check_status(ap); - } - - } - - spin_unlock_irqrestore(&host_set->lock, flags); - - return IRQ_RETVAL(handled); -} - -static int nv_host_intr(struct ata_port *ap, u8 irq_stat) -{ - struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); - int handled; - - /* freeze if hotplugged */ - if (unlikely(irq_stat & (NV_INT_ADDED | NV_INT_REMOVED))) { - ata_port_freeze(ap); - return 1; - } - - /* bail out if not our interrupt */ - if (!(irq_stat & NV_INT_DEV)) - return 0; - - /* DEV interrupt w/ no active qc? */ - if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) { - ata_check_status(ap); - return 1; - } - - /* handle interrupt */ - handled = ata_host_intr(ap, qc); - if (unlikely(!handled)) { - /* spurious, clear it */ - ata_check_status(ap); - } - - return 1; -} - -static irqreturn_t nv_do_interrupt(struct ata_host_set *host_set, u8 irq_stat) -{ - int i, handled = 0; - - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; - - if (ap && !(ap->flags & ATA_FLAG_DISABLED)) - handled += nv_host_intr(ap, irq_stat); - - irq_stat >>= NV_INT_PORT_SHIFT; - } - - return IRQ_RETVAL(handled); -} - -static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance, - struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - u8 irq_stat; - irqreturn_t ret; - - spin_lock(&host_set->lock); - irq_stat = inb(host_set->ports[0]->ioaddr.scr_addr + NV_INT_STATUS); - ret = nv_do_interrupt(host_set, irq_stat); - spin_unlock(&host_set->lock); - - return ret; -} - -static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance, - struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - u8 irq_stat; - irqreturn_t ret; - - spin_lock(&host_set->lock); - irq_stat = readb(host_set->mmio_base + NV_INT_STATUS_CK804); - ret = nv_do_interrupt(host_set, irq_stat); - spin_unlock(&host_set->lock); - - return ret; -} - -static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg) -{ - if (sc_reg > SCR_CONTROL) - return 0xffffffffU; - - return ioread32((void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4)); -} - -static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) -{ - if (sc_reg > SCR_CONTROL) - return; - - iowrite32(val, (void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4)); -} - -static void nv_nf2_freeze(struct ata_port *ap) -{ - unsigned long scr_addr = ap->host_set->ports[0]->ioaddr.scr_addr; - int shift = ap->port_no * NV_INT_PORT_SHIFT; - u8 mask; - - mask = inb(scr_addr + NV_INT_ENABLE); - mask &= ~(NV_INT_ALL << shift); - outb(mask, scr_addr + NV_INT_ENABLE); -} - -static void nv_nf2_thaw(struct ata_port *ap) -{ - unsigned long scr_addr = ap->host_set->ports[0]->ioaddr.scr_addr; - int shift = ap->port_no * NV_INT_PORT_SHIFT; - u8 mask; - - outb(NV_INT_ALL << shift, scr_addr + NV_INT_STATUS); - - mask = inb(scr_addr + NV_INT_ENABLE); - mask |= (NV_INT_MASK << shift); - outb(mask, scr_addr + NV_INT_ENABLE); -} - -static void nv_ck804_freeze(struct ata_port *ap) -{ - void __iomem *mmio_base = ap->host_set->mmio_base; - int shift = ap->port_no * NV_INT_PORT_SHIFT; - u8 mask; - - mask = readb(mmio_base + NV_INT_ENABLE_CK804); - mask &= ~(NV_INT_ALL << shift); - writeb(mask, mmio_base + NV_INT_ENABLE_CK804); -} - -static void nv_ck804_thaw(struct ata_port *ap) -{ - void __iomem *mmio_base = ap->host_set->mmio_base; - int shift = ap->port_no * NV_INT_PORT_SHIFT; - u8 mask; - - writeb(NV_INT_ALL << shift, mmio_base + NV_INT_STATUS_CK804); - - mask = readb(mmio_base + NV_INT_ENABLE_CK804); - mask |= (NV_INT_MASK << shift); - writeb(mask, mmio_base + NV_INT_ENABLE_CK804); -} - -static int nv_hardreset(struct ata_port *ap, unsigned int *class) -{ - unsigned int dummy; - - /* SATA hardreset fails to retrieve proper device signature on - * some controllers. Don't classify on hardreset. For more - * info, see http://bugme.osdl.org/show_bug.cgi?id=3352 - */ - return sata_std_hardreset(ap, &dummy); -} - -static void nv_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, - nv_hardreset, ata_std_postreset); -} - -static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int printed_version = 0; - struct ata_port_info *ppi; - struct ata_probe_ent *probe_ent; - int pci_dev_busy = 0; - int rc; - u32 bar; - unsigned long base; - - // Make sure this is a SATA controller by counting the number of bars - // (NVIDIA SATA controllers will always have six bars). Otherwise, - // it's an IDE controller and we ignore it. - for (bar=0; bar<6; bar++) - if (pci_resource_start(pdev, bar) == 0) - return -ENODEV; - - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) - goto err_out; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - pci_dev_busy = 1; - goto err_out_disable; - } - - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - - rc = -ENOMEM; - - ppi = &nv_port_info[ent->driver_data]; - probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); - if (!probe_ent) - goto err_out_regions; - - probe_ent->mmio_base = pci_iomap(pdev, 5, 0); - if (!probe_ent->mmio_base) { - rc = -EIO; - goto err_out_free_ent; - } - - base = (unsigned long)probe_ent->mmio_base; - - probe_ent->port[0].scr_addr = base + NV_PORT0_SCR_REG_OFFSET; - probe_ent->port[1].scr_addr = base + NV_PORT1_SCR_REG_OFFSET; - - /* enable SATA space for CK804 */ - if (ent->driver_data == CK804) { - u8 regval; - - pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val); - regval |= NV_MCP_SATA_CFG_20_SATA_SPACE_EN; - pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval); - } - - pci_set_master(pdev); - - rc = ata_device_add(probe_ent); - if (rc != NV_PORTS) - goto err_out_iounmap; - - kfree(probe_ent); - - return 0; - -err_out_iounmap: - pci_iounmap(pdev, probe_ent->mmio_base); -err_out_free_ent: - kfree(probe_ent); -err_out_regions: - pci_release_regions(pdev); -err_out_disable: - if (!pci_dev_busy) - pci_disable_device(pdev); -err_out: - return rc; -} - -static void nv_ck804_host_stop(struct ata_host_set *host_set) -{ - struct pci_dev *pdev = to_pci_dev(host_set->dev); - u8 regval; - - /* disable SATA space for CK804 */ - pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val); - regval &= ~NV_MCP_SATA_CFG_20_SATA_SPACE_EN; - pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval); - - ata_pci_host_stop(host_set); -} - -static int __init nv_init(void) -{ - return pci_register_driver(&nv_pci_driver); -} - -static void __exit nv_exit(void) -{ - pci_unregister_driver(&nv_pci_driver); -} - -module_init(nv_init); -module_exit(nv_exit); diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c deleted file mode 100644 index a5b3a7db7a9..00000000000 --- a/drivers/scsi/sata_promise.c +++ /dev/null @@ -1,844 +0,0 @@ -/* - * sata_promise.c - Promise SATA - * - * Maintained by: Jeff Garzik - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * Copyright 2003-2004 Red Hat, Inc. - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Hardware information only available under NDA. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "sata_promise.h" - -#define DRV_NAME "sata_promise" -#define DRV_VERSION "1.04" - - -enum { - PDC_PKT_SUBMIT = 0x40, /* Command packet pointer addr */ - PDC_INT_SEQMASK = 0x40, /* Mask of asserted SEQ INTs */ - PDC_TBG_MODE = 0x41, /* TBG mode */ - PDC_FLASH_CTL = 0x44, /* Flash control register */ - PDC_PCI_CTL = 0x48, /* PCI control and status register */ - PDC_GLOBAL_CTL = 0x48, /* Global control/status (per port) */ - PDC_CTLSTAT = 0x60, /* IDE control and status (per port) */ - PDC_SATA_PLUG_CSR = 0x6C, /* SATA Plug control/status reg */ - PDC2_SATA_PLUG_CSR = 0x60, /* SATAII Plug control/status reg */ - PDC_SLEW_CTL = 0x470, /* slew rate control reg */ - - PDC_ERR_MASK = (1<<19) | (1<<20) | (1<<21) | (1<<22) | - (1<<8) | (1<<9) | (1<<10), - - board_2037x = 0, /* FastTrak S150 TX2plus */ - board_20319 = 1, /* FastTrak S150 TX4 */ - board_20619 = 2, /* FastTrak TX4000 */ - board_20771 = 3, /* FastTrak TX2300 */ - board_2057x = 4, /* SATAII150 Tx2plus */ - board_40518 = 5, /* SATAII150 Tx4 */ - - PDC_HAS_PATA = (1 << 1), /* PDC20375/20575 has PATA */ - - PDC_RESET = (1 << 11), /* HDMA reset */ - - PDC_COMMON_FLAGS = ATA_FLAG_NO_LEGACY | ATA_FLAG_SRST | - ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI | - ATA_FLAG_PIO_POLLING, -}; - - -struct pdc_port_priv { - u8 *pkt; - dma_addr_t pkt_dma; -}; - -struct pdc_host_priv { - int hotplug_offset; -}; - -static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg); -static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); -static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *regs); -static void pdc_eng_timeout(struct ata_port *ap); -static int pdc_port_start(struct ata_port *ap); -static void pdc_port_stop(struct ata_port *ap); -static void pdc_pata_phy_reset(struct ata_port *ap); -static void pdc_sata_phy_reset(struct ata_port *ap); -static void pdc_qc_prep(struct ata_queued_cmd *qc); -static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf); -static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf); -static void pdc_irq_clear(struct ata_port *ap); -static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc); -static void pdc_host_stop(struct ata_host_set *host_set); - - -static struct scsi_host_template pdc_ata_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, -}; - -static const struct ata_port_operations pdc_sata_ops = { - .port_disable = ata_port_disable, - .tf_load = pdc_tf_load_mmio, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = pdc_exec_command_mmio, - .dev_select = ata_std_dev_select, - - .phy_reset = pdc_sata_phy_reset, - - .qc_prep = pdc_qc_prep, - .qc_issue = pdc_qc_issue_prot, - .eng_timeout = pdc_eng_timeout, - .data_xfer = ata_mmio_data_xfer, - .irq_handler = pdc_interrupt, - .irq_clear = pdc_irq_clear, - - .scr_read = pdc_sata_scr_read, - .scr_write = pdc_sata_scr_write, - .port_start = pdc_port_start, - .port_stop = pdc_port_stop, - .host_stop = pdc_host_stop, -}; - -static const struct ata_port_operations pdc_pata_ops = { - .port_disable = ata_port_disable, - .tf_load = pdc_tf_load_mmio, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = pdc_exec_command_mmio, - .dev_select = ata_std_dev_select, - - .phy_reset = pdc_pata_phy_reset, - - .qc_prep = pdc_qc_prep, - .qc_issue = pdc_qc_issue_prot, - .data_xfer = ata_mmio_data_xfer, - .eng_timeout = pdc_eng_timeout, - .irq_handler = pdc_interrupt, - .irq_clear = pdc_irq_clear, - - .port_start = pdc_port_start, - .port_stop = pdc_port_stop, - .host_stop = pdc_host_stop, -}; - -static const struct ata_port_info pdc_port_info[] = { - /* board_2037x */ - { - .sht = &pdc_ata_sht, - .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 ; FIXME */ - .port_ops = &pdc_sata_ops, - }, - - /* board_20319 */ - { - .sht = &pdc_ata_sht, - .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 ; FIXME */ - .port_ops = &pdc_sata_ops, - }, - - /* board_20619 */ - { - .sht = &pdc_ata_sht, - .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 ; FIXME */ - .port_ops = &pdc_pata_ops, - }, - - /* board_20771 */ - { - .sht = &pdc_ata_sht, - .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 ; FIXME */ - .port_ops = &pdc_sata_ops, - }, - - /* board_2057x */ - { - .sht = &pdc_ata_sht, - .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 ; FIXME */ - .port_ops = &pdc_sata_ops, - }, - - /* board_40518 */ - { - .sht = &pdc_ata_sht, - .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 ; FIXME */ - .port_ops = &pdc_sata_ops, - }, -}; - -static const struct pci_device_id pdc_ata_pci_tbl[] = { - { PCI_VENDOR_ID_PROMISE, 0x3371, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_2037x }, - { PCI_VENDOR_ID_PROMISE, 0x3570, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_2037x }, - { PCI_VENDOR_ID_PROMISE, 0x3571, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_2037x }, - { PCI_VENDOR_ID_PROMISE, 0x3373, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_2037x }, - { PCI_VENDOR_ID_PROMISE, 0x3375, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_2037x }, - { PCI_VENDOR_ID_PROMISE, 0x3376, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_2037x }, - { PCI_VENDOR_ID_PROMISE, 0x3574, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_2057x }, - { PCI_VENDOR_ID_PROMISE, 0x3d75, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_2057x }, - { PCI_VENDOR_ID_PROMISE, 0x3d73, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_2037x }, - - { PCI_VENDOR_ID_PROMISE, 0x3318, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_20319 }, - { PCI_VENDOR_ID_PROMISE, 0x3319, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_20319 }, - { PCI_VENDOR_ID_PROMISE, 0x3515, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_20319 }, - { PCI_VENDOR_ID_PROMISE, 0x3519, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_20319 }, - { PCI_VENDOR_ID_PROMISE, 0x3d17, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_20319 }, - { PCI_VENDOR_ID_PROMISE, 0x3d18, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_40518 }, - - { PCI_VENDOR_ID_PROMISE, 0x6629, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_20619 }, - -/* TODO: remove all associated board_20771 code, as it completely - * duplicates board_2037x code, unless reason for separation can be - * divined. - */ -#if 0 - { PCI_VENDOR_ID_PROMISE, 0x3570, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_20771 }, -#endif - - { } /* terminate list */ -}; - - -static struct pci_driver pdc_ata_pci_driver = { - .name = DRV_NAME, - .id_table = pdc_ata_pci_tbl, - .probe = pdc_ata_init_one, - .remove = ata_pci_remove_one, -}; - - -static int pdc_port_start(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct pdc_port_priv *pp; - int rc; - - rc = ata_port_start(ap); - if (rc) - return rc; - - pp = kzalloc(sizeof(*pp), GFP_KERNEL); - if (!pp) { - rc = -ENOMEM; - goto err_out; - } - - pp->pkt = dma_alloc_coherent(dev, 128, &pp->pkt_dma, GFP_KERNEL); - if (!pp->pkt) { - rc = -ENOMEM; - goto err_out_kfree; - } - - ap->private_data = pp; - - return 0; - -err_out_kfree: - kfree(pp); -err_out: - ata_port_stop(ap); - return rc; -} - - -static void pdc_port_stop(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct pdc_port_priv *pp = ap->private_data; - - ap->private_data = NULL; - dma_free_coherent(dev, 128, pp->pkt, pp->pkt_dma); - kfree(pp); - ata_port_stop(ap); -} - - -static void pdc_host_stop(struct ata_host_set *host_set) -{ - struct pdc_host_priv *hp = host_set->private_data; - - ata_pci_host_stop(host_set); - - kfree(hp); -} - - -static void pdc_reset_port(struct ata_port *ap) -{ - void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr + PDC_CTLSTAT; - unsigned int i; - u32 tmp; - - for (i = 11; i > 0; i--) { - tmp = readl(mmio); - if (tmp & PDC_RESET) - break; - - udelay(100); - - tmp |= PDC_RESET; - writel(tmp, mmio); - } - - tmp &= ~PDC_RESET; - writel(tmp, mmio); - readl(mmio); /* flush */ -} - -static void pdc_sata_phy_reset(struct ata_port *ap) -{ - pdc_reset_port(ap); - sata_phy_reset(ap); -} - -static void pdc_pata_cbl_detect(struct ata_port *ap) -{ - u8 tmp; - void __iomem *mmio = (void *) ap->ioaddr.cmd_addr + PDC_CTLSTAT + 0x03; - - tmp = readb(mmio); - - if (tmp & 0x01) { - ap->cbl = ATA_CBL_PATA40; - ap->udma_mask &= ATA_UDMA_MASK_40C; - } else - ap->cbl = ATA_CBL_PATA80; -} - -static void pdc_pata_phy_reset(struct ata_port *ap) -{ - pdc_pata_cbl_detect(ap); - pdc_reset_port(ap); - ata_port_probe(ap); - ata_bus_reset(ap); -} - -static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) -{ - if (sc_reg > SCR_CONTROL) - return 0xffffffffU; - return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); -} - - -static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, - u32 val) -{ - if (sc_reg > SCR_CONTROL) - return; - writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); -} - -static void pdc_qc_prep(struct ata_queued_cmd *qc) -{ - struct pdc_port_priv *pp = qc->ap->private_data; - unsigned int i; - - VPRINTK("ENTER\n"); - - switch (qc->tf.protocol) { - case ATA_PROT_DMA: - ata_qc_prep(qc); - /* fall through */ - - case ATA_PROT_NODATA: - i = pdc_pkt_header(&qc->tf, qc->ap->prd_dma, - qc->dev->devno, pp->pkt); - - if (qc->tf.flags & ATA_TFLAG_LBA48) - i = pdc_prep_lba48(&qc->tf, pp->pkt, i); - else - i = pdc_prep_lba28(&qc->tf, pp->pkt, i); - - pdc_pkt_footer(&qc->tf, pp->pkt, i); - break; - - default: - break; - } -} - -static void pdc_eng_timeout(struct ata_port *ap) -{ - struct ata_host_set *host_set = ap->host_set; - u8 drv_stat; - struct ata_queued_cmd *qc; - unsigned long flags; - - DPRINTK("ENTER\n"); - - spin_lock_irqsave(&host_set->lock, flags); - - qc = ata_qc_from_tag(ap, ap->active_tag); - - switch (qc->tf.protocol) { - case ATA_PROT_DMA: - case ATA_PROT_NODATA: - ata_port_printk(ap, KERN_ERR, "command timeout\n"); - drv_stat = ata_wait_idle(ap); - qc->err_mask |= __ac_err_mask(drv_stat); - break; - - default: - drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); - - ata_port_printk(ap, KERN_ERR, - "unknown timeout, cmd 0x%x stat 0x%x\n", - qc->tf.command, drv_stat); - - qc->err_mask |= ac_err_mask(drv_stat); - break; - } - - spin_unlock_irqrestore(&host_set->lock, flags); - ata_eh_qc_complete(qc); - DPRINTK("EXIT\n"); -} - -static inline unsigned int pdc_host_intr( struct ata_port *ap, - struct ata_queued_cmd *qc) -{ - unsigned int handled = 0; - u32 tmp; - void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr + PDC_GLOBAL_CTL; - - tmp = readl(mmio); - if (tmp & PDC_ERR_MASK) { - qc->err_mask |= AC_ERR_DEV; - pdc_reset_port(ap); - } - - switch (qc->tf.protocol) { - case ATA_PROT_DMA: - case ATA_PROT_NODATA: - qc->err_mask |= ac_err_mask(ata_wait_idle(ap)); - ata_qc_complete(qc); - handled = 1; - break; - - default: - ap->stats.idle_irq++; - break; - } - - return handled; -} - -static void pdc_irq_clear(struct ata_port *ap) -{ - struct ata_host_set *host_set = ap->host_set; - void __iomem *mmio = host_set->mmio_base; - - readl(mmio + PDC_INT_SEQMASK); -} - -static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - struct ata_port *ap; - u32 mask = 0; - unsigned int i, tmp; - unsigned int handled = 0; - void __iomem *mmio_base; - - VPRINTK("ENTER\n"); - - if (!host_set || !host_set->mmio_base) { - VPRINTK("QUICK EXIT\n"); - return IRQ_NONE; - } - - mmio_base = host_set->mmio_base; - - /* reading should also clear interrupts */ - mask = readl(mmio_base + PDC_INT_SEQMASK); - - if (mask == 0xffffffff) { - VPRINTK("QUICK EXIT 2\n"); - return IRQ_NONE; - } - - spin_lock(&host_set->lock); - - mask &= 0xffff; /* only 16 tags possible */ - if (!mask) { - VPRINTK("QUICK EXIT 3\n"); - goto done_irq; - } - - writel(mask, mmio_base + PDC_INT_SEQMASK); - - for (i = 0; i < host_set->n_ports; i++) { - VPRINTK("port %u\n", i); - ap = host_set->ports[i]; - tmp = mask & (1 << (i + 1)); - if (tmp && ap && - !(ap->flags & ATA_FLAG_DISABLED)) { - struct ata_queued_cmd *qc; - - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) - handled += pdc_host_intr(ap, qc); - } - } - - VPRINTK("EXIT\n"); - -done_irq: - spin_unlock(&host_set->lock); - return IRQ_RETVAL(handled); -} - -static inline void pdc_packet_start(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct pdc_port_priv *pp = ap->private_data; - unsigned int port_no = ap->port_no; - u8 seq = (u8) (port_no + 1); - - VPRINTK("ENTER, ap %p\n", ap); - - writel(0x00000001, ap->host_set->mmio_base + (seq * 4)); - readl(ap->host_set->mmio_base + (seq * 4)); /* flush */ - - pp->pkt[2] = seq; - wmb(); /* flush PRD, pkt writes */ - writel(pp->pkt_dma, (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); - readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */ -} - -static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc) -{ - switch (qc->tf.protocol) { - case ATA_PROT_DMA: - case ATA_PROT_NODATA: - pdc_packet_start(qc); - return 0; - - case ATA_PROT_ATAPI_DMA: - BUG(); - break; - - default: - break; - } - - return ata_qc_issue_prot(qc); -} - -static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - WARN_ON (tf->protocol == ATA_PROT_DMA || - tf->protocol == ATA_PROT_NODATA); - ata_tf_load(ap, tf); -} - - -static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - WARN_ON (tf->protocol == ATA_PROT_DMA || - tf->protocol == ATA_PROT_NODATA); - ata_exec_command(ap, tf); -} - - -static void pdc_ata_setup_port(struct ata_ioports *port, unsigned long base) -{ - port->cmd_addr = base; - port->data_addr = base; - port->feature_addr = - port->error_addr = base + 0x4; - port->nsect_addr = base + 0x8; - port->lbal_addr = base + 0xc; - port->lbam_addr = base + 0x10; - port->lbah_addr = base + 0x14; - port->device_addr = base + 0x18; - port->command_addr = - port->status_addr = base + 0x1c; - port->altstatus_addr = - port->ctl_addr = base + 0x38; -} - - -static void pdc_host_init(unsigned int chip_id, struct ata_probe_ent *pe) -{ - void __iomem *mmio = pe->mmio_base; - struct pdc_host_priv *hp = pe->private_data; - int hotplug_offset = hp->hotplug_offset; - u32 tmp; - - /* - * Except for the hotplug stuff, this is voodoo from the - * Promise driver. Label this entire section - * "TODO: figure out why we do this" - */ - - /* change FIFO_SHD to 8 dwords, enable BMR_BURST */ - tmp = readl(mmio + PDC_FLASH_CTL); - tmp |= 0x12000; /* bit 16 (fifo 8 dw) and 13 (bmr burst?) */ - writel(tmp, mmio + PDC_FLASH_CTL); - - /* clear plug/unplug flags for all ports */ - tmp = readl(mmio + hotplug_offset); - writel(tmp | 0xff, mmio + hotplug_offset); - - /* mask plug/unplug ints */ - tmp = readl(mmio + hotplug_offset); - writel(tmp | 0xff0000, mmio + hotplug_offset); - - /* reduce TBG clock to 133 Mhz. */ - tmp = readl(mmio + PDC_TBG_MODE); - tmp &= ~0x30000; /* clear bit 17, 16*/ - tmp |= 0x10000; /* set bit 17:16 = 0:1 */ - writel(tmp, mmio + PDC_TBG_MODE); - - readl(mmio + PDC_TBG_MODE); /* flush */ - msleep(10); - - /* adjust slew rate control register. */ - tmp = readl(mmio + PDC_SLEW_CTL); - tmp &= 0xFFFFF03F; /* clear bit 11 ~ 6 */ - tmp |= 0x00000900; /* set bit 11-9 = 100b , bit 8-6 = 100 */ - writel(tmp, mmio + PDC_SLEW_CTL); -} - -static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int printed_version; - struct ata_probe_ent *probe_ent = NULL; - struct pdc_host_priv *hp; - unsigned long base; - void __iomem *mmio_base; - unsigned int board_idx = (unsigned int) ent->driver_data; - int pci_dev_busy = 0; - int rc; - - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - pci_dev_busy = 1; - goto err_out; - } - - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - - probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); - if (probe_ent == NULL) { - rc = -ENOMEM; - goto err_out_regions; - } - - probe_ent->dev = pci_dev_to_dev(pdev); - INIT_LIST_HEAD(&probe_ent->node); - - mmio_base = pci_iomap(pdev, 3, 0); - if (mmio_base == NULL) { - rc = -ENOMEM; - goto err_out_free_ent; - } - base = (unsigned long) mmio_base; - - hp = kzalloc(sizeof(*hp), GFP_KERNEL); - if (hp == NULL) { - rc = -ENOMEM; - goto err_out_free_ent; - } - - /* Set default hotplug offset */ - hp->hotplug_offset = PDC_SATA_PLUG_CSR; - probe_ent->private_data = hp; - - probe_ent->sht = pdc_port_info[board_idx].sht; - probe_ent->host_flags = pdc_port_info[board_idx].host_flags; - probe_ent->pio_mask = pdc_port_info[board_idx].pio_mask; - probe_ent->mwdma_mask = pdc_port_info[board_idx].mwdma_mask; - probe_ent->udma_mask = pdc_port_info[board_idx].udma_mask; - probe_ent->port_ops = pdc_port_info[board_idx].port_ops; - - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = IRQF_SHARED; - probe_ent->mmio_base = mmio_base; - - pdc_ata_setup_port(&probe_ent->port[0], base + 0x200); - pdc_ata_setup_port(&probe_ent->port[1], base + 0x280); - - probe_ent->port[0].scr_addr = base + 0x400; - probe_ent->port[1].scr_addr = base + 0x500; - - /* notice 4-port boards */ - switch (board_idx) { - case board_40518: - /* Override hotplug offset for SATAII150 */ - hp->hotplug_offset = PDC2_SATA_PLUG_CSR; - /* Fall through */ - case board_20319: - probe_ent->n_ports = 4; - - pdc_ata_setup_port(&probe_ent->port[2], base + 0x300); - pdc_ata_setup_port(&probe_ent->port[3], base + 0x380); - - probe_ent->port[2].scr_addr = base + 0x600; - probe_ent->port[3].scr_addr = base + 0x700; - break; - case board_2057x: - /* Override hotplug offset for SATAII150 */ - hp->hotplug_offset = PDC2_SATA_PLUG_CSR; - /* Fall through */ - case board_2037x: - probe_ent->n_ports = 2; - break; - case board_20771: - probe_ent->n_ports = 2; - break; - case board_20619: - probe_ent->n_ports = 4; - - pdc_ata_setup_port(&probe_ent->port[2], base + 0x300); - pdc_ata_setup_port(&probe_ent->port[3], base + 0x380); - - probe_ent->port[2].scr_addr = base + 0x600; - probe_ent->port[3].scr_addr = base + 0x700; - break; - default: - BUG(); - break; - } - - pci_set_master(pdev); - - /* initialize adapter */ - pdc_host_init(board_idx, probe_ent); - - /* FIXME: Need any other frees than hp? */ - if (!ata_device_add(probe_ent)) - kfree(hp); - - kfree(probe_ent); - - return 0; - -err_out_free_ent: - kfree(probe_ent); -err_out_regions: - pci_release_regions(pdev); -err_out: - if (!pci_dev_busy) - pci_disable_device(pdev); - return rc; -} - - -static int __init pdc_ata_init(void) -{ - return pci_register_driver(&pdc_ata_pci_driver); -} - - -static void __exit pdc_ata_exit(void) -{ - pci_unregister_driver(&pdc_ata_pci_driver); -} - - -MODULE_AUTHOR("Jeff Garzik"); -MODULE_DESCRIPTION("Promise ATA TX2/TX4/TX4000 low-level driver"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, pdc_ata_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -module_init(pdc_ata_init); -module_exit(pdc_ata_exit); diff --git a/drivers/scsi/sata_promise.h b/drivers/scsi/sata_promise.h deleted file mode 100644 index 6ee5e190262..00000000000 --- a/drivers/scsi/sata_promise.h +++ /dev/null @@ -1,157 +0,0 @@ -/* - * sata_promise.h - Promise SATA common definitions and inline funcs - * - * Copyright 2003-2004 Red Hat, Inc. - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - */ - -#ifndef __SATA_PROMISE_H__ -#define __SATA_PROMISE_H__ - -#include - -enum pdc_packet_bits { - PDC_PKT_READ = (1 << 2), - PDC_PKT_NODATA = (1 << 3), - - PDC_PKT_SIZEMASK = (1 << 7) | (1 << 6) | (1 << 5), - PDC_PKT_CLEAR_BSY = (1 << 4), - PDC_PKT_WAIT_DRDY = (1 << 3) | (1 << 4), - PDC_LAST_REG = (1 << 3), - - PDC_REG_DEVCTL = (1 << 3) | (1 << 2) | (1 << 1), -}; - -static inline unsigned int pdc_pkt_header(struct ata_taskfile *tf, - dma_addr_t sg_table, - unsigned int devno, u8 *buf) -{ - u8 dev_reg; - u32 *buf32 = (u32 *) buf; - - /* set control bits (byte 0), zero delay seq id (byte 3), - * and seq id (byte 2) - */ - switch (tf->protocol) { - case ATA_PROT_DMA: - if (!(tf->flags & ATA_TFLAG_WRITE)) - buf32[0] = cpu_to_le32(PDC_PKT_READ); - else - buf32[0] = 0; - break; - - case ATA_PROT_NODATA: - buf32[0] = cpu_to_le32(PDC_PKT_NODATA); - break; - - default: - BUG(); - break; - } - - buf32[1] = cpu_to_le32(sg_table); /* S/G table addr */ - buf32[2] = 0; /* no next-packet */ - - if (devno == 0) - dev_reg = ATA_DEVICE_OBS; - else - dev_reg = ATA_DEVICE_OBS | ATA_DEV1; - - /* select device */ - buf[12] = (1 << 5) | PDC_PKT_CLEAR_BSY | ATA_REG_DEVICE; - buf[13] = dev_reg; - - /* device control register */ - buf[14] = (1 << 5) | PDC_REG_DEVCTL; - buf[15] = tf->ctl; - - return 16; /* offset of next byte */ -} - -static inline unsigned int pdc_pkt_footer(struct ata_taskfile *tf, u8 *buf, - unsigned int i) -{ - if (tf->flags & ATA_TFLAG_DEVICE) { - buf[i++] = (1 << 5) | ATA_REG_DEVICE; - buf[i++] = tf->device; - } - - /* and finally the command itself; also includes end-of-pkt marker */ - buf[i++] = (1 << 5) | PDC_LAST_REG | ATA_REG_CMD; - buf[i++] = tf->command; - - return i; -} - -static inline unsigned int pdc_prep_lba28(struct ata_taskfile *tf, u8 *buf, unsigned int i) -{ - /* the "(1 << 5)" should be read "(count << 5)" */ - - /* ATA command block registers */ - buf[i++] = (1 << 5) | ATA_REG_FEATURE; - buf[i++] = tf->feature; - - buf[i++] = (1 << 5) | ATA_REG_NSECT; - buf[i++] = tf->nsect; - - buf[i++] = (1 << 5) | ATA_REG_LBAL; - buf[i++] = tf->lbal; - - buf[i++] = (1 << 5) | ATA_REG_LBAM; - buf[i++] = tf->lbam; - - buf[i++] = (1 << 5) | ATA_REG_LBAH; - buf[i++] = tf->lbah; - - return i; -} - -static inline unsigned int pdc_prep_lba48(struct ata_taskfile *tf, u8 *buf, unsigned int i) -{ - /* the "(2 << 5)" should be read "(count << 5)" */ - - /* ATA command block registers */ - buf[i++] = (2 << 5) | ATA_REG_FEATURE; - buf[i++] = tf->hob_feature; - buf[i++] = tf->feature; - - buf[i++] = (2 << 5) | ATA_REG_NSECT; - buf[i++] = tf->hob_nsect; - buf[i++] = tf->nsect; - - buf[i++] = (2 << 5) | ATA_REG_LBAL; - buf[i++] = tf->hob_lbal; - buf[i++] = tf->lbal; - - buf[i++] = (2 << 5) | ATA_REG_LBAM; - buf[i++] = tf->hob_lbam; - buf[i++] = tf->lbam; - - buf[i++] = (2 << 5) | ATA_REG_LBAH; - buf[i++] = tf->hob_lbah; - buf[i++] = tf->lbah; - - return i; -} - - -#endif /* __SATA_PROMISE_H__ */ diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c deleted file mode 100644 index 71bd6712b37..00000000000 --- a/drivers/scsi/sata_qstor.c +++ /dev/null @@ -1,730 +0,0 @@ -/* - * sata_qstor.c - Pacific Digital Corporation QStor SATA - * - * Maintained by: Mark Lord - * - * Copyright 2005 Pacific Digital Corporation. - * (OSL/GPL code release authorized by Jalil Fadavi). - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "sata_qstor" -#define DRV_VERSION "0.06" - -enum { - QS_PORTS = 4, - QS_MAX_PRD = LIBATA_MAX_PRD, - QS_CPB_ORDER = 6, - QS_CPB_BYTES = (1 << QS_CPB_ORDER), - QS_PRD_BYTES = QS_MAX_PRD * 16, - QS_PKT_BYTES = QS_CPB_BYTES + QS_PRD_BYTES, - - /* global register offsets */ - QS_HCF_CNFG3 = 0x0003, /* host configuration offset */ - QS_HID_HPHY = 0x0004, /* host physical interface info */ - QS_HCT_CTRL = 0x00e4, /* global interrupt mask offset */ - QS_HST_SFF = 0x0100, /* host status fifo offset */ - QS_HVS_SERD3 = 0x0393, /* PHY enable offset */ - - /* global control bits */ - QS_HPHY_64BIT = (1 << 1), /* 64-bit bus detected */ - QS_CNFG3_GSRST = 0x01, /* global chip reset */ - QS_SERD3_PHY_ENA = 0xf0, /* PHY detection ENAble*/ - - /* per-channel register offsets */ - QS_CCF_CPBA = 0x0710, /* chan CPB base address */ - QS_CCF_CSEP = 0x0718, /* chan CPB separation factor */ - QS_CFC_HUFT = 0x0800, /* host upstream fifo threshold */ - QS_CFC_HDFT = 0x0804, /* host downstream fifo threshold */ - QS_CFC_DUFT = 0x0808, /* dev upstream fifo threshold */ - QS_CFC_DDFT = 0x080c, /* dev downstream fifo threshold */ - QS_CCT_CTR0 = 0x0900, /* chan control-0 offset */ - QS_CCT_CTR1 = 0x0901, /* chan control-1 offset */ - QS_CCT_CFF = 0x0a00, /* chan command fifo offset */ - - /* channel control bits */ - QS_CTR0_REG = (1 << 1), /* register mode (vs. pkt mode) */ - QS_CTR0_CLER = (1 << 2), /* clear channel errors */ - QS_CTR1_RDEV = (1 << 1), /* sata phy/comms reset */ - QS_CTR1_RCHN = (1 << 4), /* reset channel logic */ - QS_CCF_RUN_PKT = 0x107, /* RUN a new dma PKT */ - - /* pkt sub-field headers */ - QS_HCB_HDR = 0x01, /* Host Control Block header */ - QS_DCB_HDR = 0x02, /* Device Control Block header */ - - /* pkt HCB flag bits */ - QS_HF_DIRO = (1 << 0), /* data DIRection Out */ - QS_HF_DAT = (1 << 3), /* DATa pkt */ - QS_HF_IEN = (1 << 4), /* Interrupt ENable */ - QS_HF_VLD = (1 << 5), /* VaLiD pkt */ - - /* pkt DCB flag bits */ - QS_DF_PORD = (1 << 2), /* Pio OR Dma */ - QS_DF_ELBA = (1 << 3), /* Extended LBA (lba48) */ - - /* PCI device IDs */ - board_2068_idx = 0, /* QStor 4-port SATA/RAID */ -}; - -enum { - QS_DMA_BOUNDARY = ~0UL -}; - -typedef enum { qs_state_idle, qs_state_pkt, qs_state_mmio } qs_state_t; - -struct qs_port_priv { - u8 *pkt; - dma_addr_t pkt_dma; - qs_state_t state; -}; - -static u32 qs_scr_read (struct ata_port *ap, unsigned int sc_reg); -static void qs_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); -static int qs_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static irqreturn_t qs_intr (int irq, void *dev_instance, struct pt_regs *regs); -static int qs_port_start(struct ata_port *ap); -static void qs_host_stop(struct ata_host_set *host_set); -static void qs_port_stop(struct ata_port *ap); -static void qs_phy_reset(struct ata_port *ap); -static void qs_qc_prep(struct ata_queued_cmd *qc); -static unsigned int qs_qc_issue(struct ata_queued_cmd *qc); -static int qs_check_atapi_dma(struct ata_queued_cmd *qc); -static void qs_bmdma_stop(struct ata_queued_cmd *qc); -static u8 qs_bmdma_status(struct ata_port *ap); -static void qs_irq_clear(struct ata_port *ap); -static void qs_eng_timeout(struct ata_port *ap); - -static struct scsi_host_template qs_ata_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = QS_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - //FIXME .use_clustering = ATA_SHT_USE_CLUSTERING, - .use_clustering = ENABLE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = QS_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, -}; - -static const struct ata_port_operations qs_ata_ops = { - .port_disable = ata_port_disable, - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .check_atapi_dma = qs_check_atapi_dma, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - .phy_reset = qs_phy_reset, - .qc_prep = qs_qc_prep, - .qc_issue = qs_qc_issue, - .data_xfer = ata_mmio_data_xfer, - .eng_timeout = qs_eng_timeout, - .irq_handler = qs_intr, - .irq_clear = qs_irq_clear, - .scr_read = qs_scr_read, - .scr_write = qs_scr_write, - .port_start = qs_port_start, - .port_stop = qs_port_stop, - .host_stop = qs_host_stop, - .bmdma_stop = qs_bmdma_stop, - .bmdma_status = qs_bmdma_status, -}; - -static const struct ata_port_info qs_port_info[] = { - /* board_2068_idx */ - { - .sht = &qs_ata_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | - //FIXME ATA_FLAG_SRST | - ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING, - .pio_mask = 0x10, /* pio4 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &qs_ata_ops, - }, -}; - -static const struct pci_device_id qs_ata_pci_tbl[] = { - { PCI_VENDOR_ID_PDC, 0x2068, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_2068_idx }, - - { } /* terminate list */ -}; - -static struct pci_driver qs_ata_pci_driver = { - .name = DRV_NAME, - .id_table = qs_ata_pci_tbl, - .probe = qs_ata_init_one, - .remove = ata_pci_remove_one, -}; - -static int qs_check_atapi_dma(struct ata_queued_cmd *qc) -{ - return 1; /* ATAPI DMA not supported */ -} - -static void qs_bmdma_stop(struct ata_queued_cmd *qc) -{ - /* nothing */ -} - -static u8 qs_bmdma_status(struct ata_port *ap) -{ - return 0; -} - -static void qs_irq_clear(struct ata_port *ap) -{ - /* nothing */ -} - -static inline void qs_enter_reg_mode(struct ata_port *ap) -{ - u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000); - - writeb(QS_CTR0_REG, chan + QS_CCT_CTR0); - readb(chan + QS_CCT_CTR0); /* flush */ -} - -static inline void qs_reset_channel_logic(struct ata_port *ap) -{ - u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000); - - writeb(QS_CTR1_RCHN, chan + QS_CCT_CTR1); - readb(chan + QS_CCT_CTR0); /* flush */ - qs_enter_reg_mode(ap); -} - -static void qs_phy_reset(struct ata_port *ap) -{ - struct qs_port_priv *pp = ap->private_data; - - pp->state = qs_state_idle; - qs_reset_channel_logic(ap); - sata_phy_reset(ap); -} - -static void qs_eng_timeout(struct ata_port *ap) -{ - struct qs_port_priv *pp = ap->private_data; - - if (pp->state != qs_state_idle) /* healthy paranoia */ - pp->state = qs_state_mmio; - qs_reset_channel_logic(ap); - ata_eng_timeout(ap); -} - -static u32 qs_scr_read (struct ata_port *ap, unsigned int sc_reg) -{ - if (sc_reg > SCR_CONTROL) - return ~0U; - return readl((void __iomem *)(ap->ioaddr.scr_addr + (sc_reg * 8))); -} - -static void qs_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) -{ - if (sc_reg > SCR_CONTROL) - return; - writel(val, (void __iomem *)(ap->ioaddr.scr_addr + (sc_reg * 8))); -} - -static unsigned int qs_fill_sg(struct ata_queued_cmd *qc) -{ - struct scatterlist *sg; - struct ata_port *ap = qc->ap; - struct qs_port_priv *pp = ap->private_data; - unsigned int nelem; - u8 *prd = pp->pkt + QS_CPB_BYTES; - - WARN_ON(qc->__sg == NULL); - WARN_ON(qc->n_elem == 0 && qc->pad_len == 0); - - nelem = 0; - ata_for_each_sg(sg, qc) { - u64 addr; - u32 len; - - addr = sg_dma_address(sg); - *(__le64 *)prd = cpu_to_le64(addr); - prd += sizeof(u64); - - len = sg_dma_len(sg); - *(__le32 *)prd = cpu_to_le32(len); - prd += sizeof(u64); - - VPRINTK("PRD[%u] = (0x%llX, 0x%X)\n", nelem, - (unsigned long long)addr, len); - nelem++; - } - - return nelem; -} - -static void qs_qc_prep(struct ata_queued_cmd *qc) -{ - struct qs_port_priv *pp = qc->ap->private_data; - u8 dflags = QS_DF_PORD, *buf = pp->pkt; - u8 hflags = QS_HF_DAT | QS_HF_IEN | QS_HF_VLD; - u64 addr; - unsigned int nelem; - - VPRINTK("ENTER\n"); - - qs_enter_reg_mode(qc->ap); - if (qc->tf.protocol != ATA_PROT_DMA) { - ata_qc_prep(qc); - return; - } - - nelem = qs_fill_sg(qc); - - if ((qc->tf.flags & ATA_TFLAG_WRITE)) - hflags |= QS_HF_DIRO; - if ((qc->tf.flags & ATA_TFLAG_LBA48)) - dflags |= QS_DF_ELBA; - - /* host control block (HCB) */ - buf[ 0] = QS_HCB_HDR; - buf[ 1] = hflags; - *(__le32 *)(&buf[ 4]) = cpu_to_le32(qc->nsect * ATA_SECT_SIZE); - *(__le32 *)(&buf[ 8]) = cpu_to_le32(nelem); - addr = ((u64)pp->pkt_dma) + QS_CPB_BYTES; - *(__le64 *)(&buf[16]) = cpu_to_le64(addr); - - /* device control block (DCB) */ - buf[24] = QS_DCB_HDR; - buf[28] = dflags; - - /* frame information structure (FIS) */ - ata_tf_to_fis(&qc->tf, &buf[32], 0); -} - -static inline void qs_packet_start(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000); - - VPRINTK("ENTER, ap %p\n", ap); - - writeb(QS_CTR0_CLER, chan + QS_CCT_CTR0); - wmb(); /* flush PRDs and pkt to memory */ - writel(QS_CCF_RUN_PKT, chan + QS_CCT_CFF); - readl(chan + QS_CCT_CFF); /* flush */ -} - -static unsigned int qs_qc_issue(struct ata_queued_cmd *qc) -{ - struct qs_port_priv *pp = qc->ap->private_data; - - switch (qc->tf.protocol) { - case ATA_PROT_DMA: - - pp->state = qs_state_pkt; - qs_packet_start(qc); - return 0; - - case ATA_PROT_ATAPI_DMA: - BUG(); - break; - - default: - break; - } - - pp->state = qs_state_mmio; - return ata_qc_issue_prot(qc); -} - -static inline unsigned int qs_intr_pkt(struct ata_host_set *host_set) -{ - unsigned int handled = 0; - u8 sFFE; - u8 __iomem *mmio_base = host_set->mmio_base; - - do { - u32 sff0 = readl(mmio_base + QS_HST_SFF); - u32 sff1 = readl(mmio_base + QS_HST_SFF + 4); - u8 sEVLD = (sff1 >> 30) & 0x01; /* valid flag */ - sFFE = sff1 >> 31; /* empty flag */ - - if (sEVLD) { - u8 sDST = sff0 >> 16; /* dev status */ - u8 sHST = sff1 & 0x3f; /* host status */ - unsigned int port_no = (sff1 >> 8) & 0x03; - struct ata_port *ap = host_set->ports[port_no]; - - DPRINTK("SFF=%08x%08x: sCHAN=%u sHST=%d sDST=%02x\n", - sff1, sff0, port_no, sHST, sDST); - handled = 1; - if (ap && !(ap->flags & ATA_FLAG_DISABLED)) { - struct ata_queued_cmd *qc; - struct qs_port_priv *pp = ap->private_data; - if (!pp || pp->state != qs_state_pkt) - continue; - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { - switch (sHST) { - case 0: /* successful CPB */ - case 3: /* device error */ - pp->state = qs_state_idle; - qs_enter_reg_mode(qc->ap); - qc->err_mask |= ac_err_mask(sDST); - ata_qc_complete(qc); - break; - default: - break; - } - } - } - } - } while (!sFFE); - return handled; -} - -static inline unsigned int qs_intr_mmio(struct ata_host_set *host_set) -{ - unsigned int handled = 0, port_no; - - for (port_no = 0; port_no < host_set->n_ports; ++port_no) { - struct ata_port *ap; - ap = host_set->ports[port_no]; - if (ap && - !(ap->flags & ATA_FLAG_DISABLED)) { - struct ata_queued_cmd *qc; - struct qs_port_priv *pp = ap->private_data; - if (!pp || pp->state != qs_state_mmio) - continue; - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { - - /* check main status, clearing INTRQ */ - u8 status = ata_check_status(ap); - if ((status & ATA_BUSY)) - continue; - DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n", - ap->id, qc->tf.protocol, status); - - /* complete taskfile transaction */ - pp->state = qs_state_idle; - qc->err_mask |= ac_err_mask(status); - ata_qc_complete(qc); - handled = 1; - } - } - } - return handled; -} - -static irqreturn_t qs_intr(int irq, void *dev_instance, struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - unsigned int handled = 0; - - VPRINTK("ENTER\n"); - - spin_lock(&host_set->lock); - handled = qs_intr_pkt(host_set) | qs_intr_mmio(host_set); - spin_unlock(&host_set->lock); - - VPRINTK("EXIT\n"); - - return IRQ_RETVAL(handled); -} - -static void qs_ata_setup_port(struct ata_ioports *port, unsigned long base) -{ - port->cmd_addr = - port->data_addr = base + 0x400; - port->error_addr = - port->feature_addr = base + 0x408; /* hob_feature = 0x409 */ - port->nsect_addr = base + 0x410; /* hob_nsect = 0x411 */ - port->lbal_addr = base + 0x418; /* hob_lbal = 0x419 */ - port->lbam_addr = base + 0x420; /* hob_lbam = 0x421 */ - port->lbah_addr = base + 0x428; /* hob_lbah = 0x429 */ - port->device_addr = base + 0x430; - port->status_addr = - port->command_addr = base + 0x438; - port->altstatus_addr = - port->ctl_addr = base + 0x440; - port->scr_addr = base + 0xc00; -} - -static int qs_port_start(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct qs_port_priv *pp; - void __iomem *mmio_base = ap->host_set->mmio_base; - void __iomem *chan = mmio_base + (ap->port_no * 0x4000); - u64 addr; - int rc; - - rc = ata_port_start(ap); - if (rc) - return rc; - qs_enter_reg_mode(ap); - pp = kzalloc(sizeof(*pp), GFP_KERNEL); - if (!pp) { - rc = -ENOMEM; - goto err_out; - } - pp->pkt = dma_alloc_coherent(dev, QS_PKT_BYTES, &pp->pkt_dma, - GFP_KERNEL); - if (!pp->pkt) { - rc = -ENOMEM; - goto err_out_kfree; - } - memset(pp->pkt, 0, QS_PKT_BYTES); - ap->private_data = pp; - - addr = (u64)pp->pkt_dma; - writel((u32) addr, chan + QS_CCF_CPBA); - writel((u32)(addr >> 32), chan + QS_CCF_CPBA + 4); - return 0; - -err_out_kfree: - kfree(pp); -err_out: - ata_port_stop(ap); - return rc; -} - -static void qs_port_stop(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct qs_port_priv *pp = ap->private_data; - - if (pp != NULL) { - ap->private_data = NULL; - if (pp->pkt != NULL) - dma_free_coherent(dev, QS_PKT_BYTES, pp->pkt, - pp->pkt_dma); - kfree(pp); - } - ata_port_stop(ap); -} - -static void qs_host_stop(struct ata_host_set *host_set) -{ - void __iomem *mmio_base = host_set->mmio_base; - struct pci_dev *pdev = to_pci_dev(host_set->dev); - - writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */ - writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */ - - pci_iounmap(pdev, mmio_base); -} - -static void qs_host_init(unsigned int chip_id, struct ata_probe_ent *pe) -{ - void __iomem *mmio_base = pe->mmio_base; - unsigned int port_no; - - writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */ - writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */ - - /* reset each channel in turn */ - for (port_no = 0; port_no < pe->n_ports; ++port_no) { - u8 __iomem *chan = mmio_base + (port_no * 0x4000); - writeb(QS_CTR1_RDEV|QS_CTR1_RCHN, chan + QS_CCT_CTR1); - writeb(QS_CTR0_REG, chan + QS_CCT_CTR0); - readb(chan + QS_CCT_CTR0); /* flush */ - } - writeb(QS_SERD3_PHY_ENA, mmio_base + QS_HVS_SERD3); /* enable phy */ - - for (port_no = 0; port_no < pe->n_ports; ++port_no) { - u8 __iomem *chan = mmio_base + (port_no * 0x4000); - /* set FIFO depths to same settings as Windows driver */ - writew(32, chan + QS_CFC_HUFT); - writew(32, chan + QS_CFC_HDFT); - writew(10, chan + QS_CFC_DUFT); - writew( 8, chan + QS_CFC_DDFT); - /* set CPB size in bytes, as a power of two */ - writeb(QS_CPB_ORDER, chan + QS_CCF_CSEP); - } - writeb(1, mmio_base + QS_HCT_CTRL); /* enable host interrupts */ -} - -/* - * The QStor understands 64-bit buses, and uses 64-bit fields - * for DMA pointers regardless of bus width. We just have to - * make sure our DMA masks are set appropriately for whatever - * bridge lies between us and the QStor, and then the DMA mapping - * code will ensure we only ever "see" appropriate buffer addresses. - * If we're 32-bit limited somewhere, then our 64-bit fields will - * just end up with zeros in the upper 32-bits, without any special - * logic required outside of this routine (below). - */ -static int qs_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base) -{ - u32 bus_info = readl(mmio_base + QS_HID_HPHY); - int rc, have_64bit_bus = (bus_info & QS_HPHY_64BIT); - - if (have_64bit_bus && - !pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { - rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); - if (rc) { - rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "64-bit DMA enable failed\n"); - return rc; - } - } - } else { - rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "32-bit DMA enable failed\n"); - return rc; - } - rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "32-bit consistent DMA enable failed\n"); - return rc; - } - } - return 0; -} - -static int qs_ata_init_one(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - static int printed_version; - struct ata_probe_ent *probe_ent = NULL; - void __iomem *mmio_base; - unsigned int board_idx = (unsigned int) ent->driver_data; - int rc, port_no; - - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) - goto err_out; - - if ((pci_resource_flags(pdev, 4) & IORESOURCE_MEM) == 0) { - rc = -ENODEV; - goto err_out_regions; - } - - mmio_base = pci_iomap(pdev, 4, 0); - if (mmio_base == NULL) { - rc = -ENOMEM; - goto err_out_regions; - } - - rc = qs_set_dma_masks(pdev, mmio_base); - if (rc) - goto err_out_iounmap; - - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); - if (probe_ent == NULL) { - rc = -ENOMEM; - goto err_out_iounmap; - } - - memset(probe_ent, 0, sizeof(*probe_ent)); - probe_ent->dev = pci_dev_to_dev(pdev); - INIT_LIST_HEAD(&probe_ent->node); - - probe_ent->sht = qs_port_info[board_idx].sht; - probe_ent->host_flags = qs_port_info[board_idx].host_flags; - probe_ent->pio_mask = qs_port_info[board_idx].pio_mask; - probe_ent->mwdma_mask = qs_port_info[board_idx].mwdma_mask; - probe_ent->udma_mask = qs_port_info[board_idx].udma_mask; - probe_ent->port_ops = qs_port_info[board_idx].port_ops; - - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = IRQF_SHARED; - probe_ent->mmio_base = mmio_base; - probe_ent->n_ports = QS_PORTS; - - for (port_no = 0; port_no < probe_ent->n_ports; ++port_no) { - unsigned long chan = (unsigned long)mmio_base + - (port_no * 0x4000); - qs_ata_setup_port(&probe_ent->port[port_no], chan); - } - - pci_set_master(pdev); - - /* initialize adapter */ - qs_host_init(board_idx, probe_ent); - - rc = ata_device_add(probe_ent); - kfree(probe_ent); - if (rc != QS_PORTS) - goto err_out_iounmap; - return 0; - -err_out_iounmap: - pci_iounmap(pdev, mmio_base); -err_out_regions: - pci_release_regions(pdev); -err_out: - pci_disable_device(pdev); - return rc; -} - -static int __init qs_ata_init(void) -{ - return pci_register_driver(&qs_ata_pci_driver); -} - -static void __exit qs_ata_exit(void) -{ - pci_unregister_driver(&qs_ata_pci_driver); -} - -MODULE_AUTHOR("Mark Lord"); -MODULE_DESCRIPTION("Pacific Digital Corporation QStor SATA low-level driver"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, qs_ata_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -module_init(qs_ata_init); -module_exit(qs_ata_exit); diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c deleted file mode 100644 index 907faa87239..00000000000 --- a/drivers/scsi/sata_sil.c +++ /dev/null @@ -1,723 +0,0 @@ -/* - * sata_sil.c - Silicon Image SATA - * - * Maintained by: Jeff Garzik - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * Copyright 2003-2005 Red Hat, Inc. - * Copyright 2003 Benjamin Herrenschmidt - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Documentation for SiI 3112: - * http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2 - * - * Other errata and documentation available under NDA. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "sata_sil" -#define DRV_VERSION "2.0" - -enum { - /* - * host flags - */ - SIL_FLAG_NO_SATA_IRQ = (1 << 28), - SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29), - SIL_FLAG_MOD15WRITE = (1 << 30), - - SIL_DFL_HOST_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_HRST_TO_RESUME, - - /* - * Controller IDs - */ - sil_3112 = 0, - sil_3112_no_sata_irq = 1, - sil_3512 = 2, - sil_3114 = 3, - - /* - * Register offsets - */ - SIL_SYSCFG = 0x48, - - /* - * Register bits - */ - /* SYSCFG */ - SIL_MASK_IDE0_INT = (1 << 22), - SIL_MASK_IDE1_INT = (1 << 23), - SIL_MASK_IDE2_INT = (1 << 24), - SIL_MASK_IDE3_INT = (1 << 25), - SIL_MASK_2PORT = SIL_MASK_IDE0_INT | SIL_MASK_IDE1_INT, - SIL_MASK_4PORT = SIL_MASK_2PORT | - SIL_MASK_IDE2_INT | SIL_MASK_IDE3_INT, - - /* BMDMA/BMDMA2 */ - SIL_INTR_STEERING = (1 << 1), - - SIL_DMA_ENABLE = (1 << 0), /* DMA run switch */ - SIL_DMA_RDWR = (1 << 3), /* DMA Rd-Wr */ - SIL_DMA_SATA_IRQ = (1 << 4), /* OR of all SATA IRQs */ - SIL_DMA_ACTIVE = (1 << 16), /* DMA running */ - SIL_DMA_ERROR = (1 << 17), /* PCI bus error */ - SIL_DMA_COMPLETE = (1 << 18), /* cmd complete / IRQ pending */ - SIL_DMA_N_SATA_IRQ = (1 << 6), /* SATA_IRQ for the next channel */ - SIL_DMA_N_ACTIVE = (1 << 24), /* ACTIVE for the next channel */ - SIL_DMA_N_ERROR = (1 << 25), /* ERROR for the next channel */ - SIL_DMA_N_COMPLETE = (1 << 26), /* COMPLETE for the next channel */ - - /* SIEN */ - SIL_SIEN_N = (1 << 16), /* triggered by SError.N */ - - /* - * Others - */ - SIL_QUIRK_MOD15WRITE = (1 << 0), - SIL_QUIRK_UDMA5MAX = (1 << 1), -}; - -static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static int sil_pci_device_resume(struct pci_dev *pdev); -static void sil_dev_config(struct ata_port *ap, struct ata_device *dev); -static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg); -static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); -static void sil_post_set_mode (struct ata_port *ap); -static irqreturn_t sil_interrupt(int irq, void *dev_instance, - struct pt_regs *regs); -static void sil_freeze(struct ata_port *ap); -static void sil_thaw(struct ata_port *ap); - - -static const struct pci_device_id sil_pci_tbl[] = { - { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, - { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, - { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3512 }, - { 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 }, - { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, - { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_no_sata_irq }, - { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_no_sata_irq }, - { } /* terminate list */ -}; - - -/* TODO firmware versions should be added - eric */ -static const struct sil_drivelist { - const char * product; - unsigned int quirk; -} sil_blacklist [] = { - { "ST320012AS", SIL_QUIRK_MOD15WRITE }, - { "ST330013AS", SIL_QUIRK_MOD15WRITE }, - { "ST340017AS", SIL_QUIRK_MOD15WRITE }, - { "ST360015AS", SIL_QUIRK_MOD15WRITE }, - { "ST380023AS", SIL_QUIRK_MOD15WRITE }, - { "ST3120023AS", SIL_QUIRK_MOD15WRITE }, - { "ST340014ASL", SIL_QUIRK_MOD15WRITE }, - { "ST360014ASL", SIL_QUIRK_MOD15WRITE }, - { "ST380011ASL", SIL_QUIRK_MOD15WRITE }, - { "ST3120022ASL", SIL_QUIRK_MOD15WRITE }, - { "ST3160021ASL", SIL_QUIRK_MOD15WRITE }, - { "Maxtor 4D060H3", SIL_QUIRK_UDMA5MAX }, - { } -}; - -static struct pci_driver sil_pci_driver = { - .name = DRV_NAME, - .id_table = sil_pci_tbl, - .probe = sil_init_one, - .remove = ata_pci_remove_one, - .suspend = ata_pci_device_suspend, - .resume = sil_pci_device_resume, -}; - -static struct scsi_host_template sil_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, - .suspend = ata_scsi_device_suspend, - .resume = ata_scsi_device_resume, -}; - -static const struct ata_port_operations sil_ops = { - .port_disable = ata_port_disable, - .dev_config = sil_dev_config, - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - .post_set_mode = sil_post_set_mode, - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_mmio_data_xfer, - .freeze = sil_freeze, - .thaw = sil_thaw, - .error_handler = ata_bmdma_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - .irq_handler = sil_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .scr_read = sil_scr_read, - .scr_write = sil_scr_write, - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_pci_host_stop, -}; - -static const struct ata_port_info sil_port_info[] = { - /* sil_3112 */ - { - .sht = &sil_sht, - .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_MOD15WRITE, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x3f, /* udma0-5 */ - .port_ops = &sil_ops, - }, - /* sil_3112_no_sata_irq */ - { - .sht = &sil_sht, - .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_MOD15WRITE | - SIL_FLAG_NO_SATA_IRQ, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x3f, /* udma0-5 */ - .port_ops = &sil_ops, - }, - /* sil_3512 */ - { - .sht = &sil_sht, - .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x3f, /* udma0-5 */ - .port_ops = &sil_ops, - }, - /* sil_3114 */ - { - .sht = &sil_sht, - .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x3f, /* udma0-5 */ - .port_ops = &sil_ops, - }, -}; - -/* per-port register offsets */ -/* TODO: we can probably calculate rather than use a table */ -static const struct { - unsigned long tf; /* ATA taskfile register block */ - unsigned long ctl; /* ATA control/altstatus register block */ - unsigned long bmdma; /* DMA register block */ - unsigned long bmdma2; /* DMA register block #2 */ - unsigned long fifo_cfg; /* FIFO Valid Byte Count and Control */ - unsigned long scr; /* SATA control register block */ - unsigned long sien; /* SATA Interrupt Enable register */ - unsigned long xfer_mode;/* data transfer mode register */ - unsigned long sfis_cfg; /* SATA FIS reception config register */ -} sil_port[] = { - /* port 0 ... */ - { 0x80, 0x8A, 0x00, 0x10, 0x40, 0x100, 0x148, 0xb4, 0x14c }, - { 0xC0, 0xCA, 0x08, 0x18, 0x44, 0x180, 0x1c8, 0xf4, 0x1cc }, - { 0x280, 0x28A, 0x200, 0x210, 0x240, 0x300, 0x348, 0x2b4, 0x34c }, - { 0x2C0, 0x2CA, 0x208, 0x218, 0x244, 0x380, 0x3c8, 0x2f4, 0x3cc }, - /* ... port 3 */ -}; - -MODULE_AUTHOR("Jeff Garzik"); -MODULE_DESCRIPTION("low-level driver for Silicon Image SATA controller"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, sil_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -static int slow_down = 0; -module_param(slow_down, int, 0444); -MODULE_PARM_DESC(slow_down, "Sledgehammer used to work around random problems, by limiting commands to 15 sectors (0=off, 1=on)"); - - -static unsigned char sil_get_device_cache_line(struct pci_dev *pdev) -{ - u8 cache_line = 0; - pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache_line); - return cache_line; -} - -static void sil_post_set_mode (struct ata_port *ap) -{ - struct ata_host_set *host_set = ap->host_set; - struct ata_device *dev; - void __iomem *addr = - host_set->mmio_base + sil_port[ap->port_no].xfer_mode; - u32 tmp, dev_mode[2]; - unsigned int i; - - for (i = 0; i < 2; i++) { - dev = &ap->device[i]; - if (!ata_dev_enabled(dev)) - dev_mode[i] = 0; /* PIO0/1/2 */ - else if (dev->flags & ATA_DFLAG_PIO) - dev_mode[i] = 1; /* PIO3/4 */ - else - dev_mode[i] = 3; /* UDMA */ - /* value 2 indicates MDMA */ - } - - tmp = readl(addr); - tmp &= ~((1<<5) | (1<<4) | (1<<1) | (1<<0)); - tmp |= dev_mode[0]; - tmp |= (dev_mode[1] << 4); - writel(tmp, addr); - readl(addr); /* flush */ -} - -static inline unsigned long sil_scr_addr(struct ata_port *ap, unsigned int sc_reg) -{ - unsigned long offset = ap->ioaddr.scr_addr; - - switch (sc_reg) { - case SCR_STATUS: - return offset + 4; - case SCR_ERROR: - return offset + 8; - case SCR_CONTROL: - return offset; - default: - /* do nothing */ - break; - } - - return 0; -} - -static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg) -{ - void __iomem *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg); - if (mmio) - return readl(mmio); - return 0xffffffffU; -} - -static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) -{ - void *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg); - if (mmio) - writel(val, mmio); -} - -static void sil_host_intr(struct ata_port *ap, u32 bmdma2) -{ - struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); - u8 status; - - if (unlikely(bmdma2 & SIL_DMA_SATA_IRQ)) { - u32 serror; - - /* SIEN doesn't mask SATA IRQs on some 3112s. Those - * controllers continue to assert IRQ as long as - * SError bits are pending. Clear SError immediately. - */ - serror = sil_scr_read(ap, SCR_ERROR); - sil_scr_write(ap, SCR_ERROR, serror); - - /* Trigger hotplug and accumulate SError only if the - * port isn't already frozen. Otherwise, PHY events - * during hardreset makes controllers with broken SIEN - * repeat probing needlessly. - */ - if (!(ap->pflags & ATA_PFLAG_FROZEN)) { - ata_ehi_hotplugged(&ap->eh_info); - ap->eh_info.serror |= serror; - } - - goto freeze; - } - - if (unlikely(!qc || qc->tf.ctl & ATA_NIEN)) - goto freeze; - - /* Check whether we are expecting interrupt in this state */ - switch (ap->hsm_task_state) { - case HSM_ST_FIRST: - /* Some pre-ATAPI-4 devices assert INTRQ - * at this state when ready to receive CDB. - */ - - /* Check the ATA_DFLAG_CDB_INTR flag is enough here. - * The flag was turned on only for atapi devices. - * No need to check is_atapi_taskfile(&qc->tf) again. - */ - if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - goto err_hsm; - break; - case HSM_ST_LAST: - if (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_DMA) { - /* clear DMA-Start bit */ - ap->ops->bmdma_stop(qc); - - if (bmdma2 & SIL_DMA_ERROR) { - qc->err_mask |= AC_ERR_HOST_BUS; - ap->hsm_task_state = HSM_ST_ERR; - } - } - break; - case HSM_ST: - break; - default: - goto err_hsm; - } - - /* check main status, clearing INTRQ */ - status = ata_chk_status(ap); - if (unlikely(status & ATA_BUSY)) - goto err_hsm; - - /* ack bmdma irq events */ - ata_bmdma_irq_clear(ap); - - /* kick HSM in the ass */ - ata_hsm_move(ap, qc, status, 0); - - return; - - err_hsm: - qc->err_mask |= AC_ERR_HSM; - freeze: - ata_port_freeze(ap); -} - -static irqreturn_t sil_interrupt(int irq, void *dev_instance, - struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - void __iomem *mmio_base = host_set->mmio_base; - int handled = 0; - int i; - - spin_lock(&host_set->lock); - - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; - u32 bmdma2 = readl(mmio_base + sil_port[ap->port_no].bmdma2); - - if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED)) - continue; - - /* turn off SATA_IRQ if not supported */ - if (ap->flags & SIL_FLAG_NO_SATA_IRQ) - bmdma2 &= ~SIL_DMA_SATA_IRQ; - - if (bmdma2 == 0xffffffff || - !(bmdma2 & (SIL_DMA_COMPLETE | SIL_DMA_SATA_IRQ))) - continue; - - sil_host_intr(ap, bmdma2); - handled = 1; - } - - spin_unlock(&host_set->lock); - - return IRQ_RETVAL(handled); -} - -static void sil_freeze(struct ata_port *ap) -{ - void __iomem *mmio_base = ap->host_set->mmio_base; - u32 tmp; - - /* global IRQ mask doesn't block SATA IRQ, turn off explicitly */ - writel(0, mmio_base + sil_port[ap->port_no].sien); - - /* plug IRQ */ - tmp = readl(mmio_base + SIL_SYSCFG); - tmp |= SIL_MASK_IDE0_INT << ap->port_no; - writel(tmp, mmio_base + SIL_SYSCFG); - readl(mmio_base + SIL_SYSCFG); /* flush */ -} - -static void sil_thaw(struct ata_port *ap) -{ - void __iomem *mmio_base = ap->host_set->mmio_base; - u32 tmp; - - /* clear IRQ */ - ata_chk_status(ap); - ata_bmdma_irq_clear(ap); - - /* turn on SATA IRQ if supported */ - if (!(ap->flags & SIL_FLAG_NO_SATA_IRQ)) - writel(SIL_SIEN_N, mmio_base + sil_port[ap->port_no].sien); - - /* turn on IRQ */ - tmp = readl(mmio_base + SIL_SYSCFG); - tmp &= ~(SIL_MASK_IDE0_INT << ap->port_no); - writel(tmp, mmio_base + SIL_SYSCFG); -} - -/** - * sil_dev_config - Apply device/host-specific errata fixups - * @ap: Port containing device to be examined - * @dev: Device to be examined - * - * After the IDENTIFY [PACKET] DEVICE step is complete, and a - * device is known to be present, this function is called. - * We apply two errata fixups which are specific to Silicon Image, - * a Seagate and a Maxtor fixup. - * - * For certain Seagate devices, we must limit the maximum sectors - * to under 8K. - * - * For certain Maxtor devices, we must not program the drive - * beyond udma5. - * - * Both fixups are unfairly pessimistic. As soon as I get more - * information on these errata, I will create a more exhaustive - * list, and apply the fixups to only the specific - * devices/hosts/firmwares that need it. - * - * 20040111 - Seagate drives affected by the Mod15Write bug are blacklisted - * The Maxtor quirk is in the blacklist, but I'm keeping the original - * pessimistic fix for the following reasons... - * - There seems to be less info on it, only one device gleaned off the - * Windows driver, maybe only one is affected. More info would be greatly - * appreciated. - * - But then again UDMA5 is hardly anything to complain about - */ -static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) -{ - unsigned int n, quirks = 0; - unsigned char model_num[41]; - - ata_id_c_string(dev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num)); - - for (n = 0; sil_blacklist[n].product; n++) - if (!strcmp(sil_blacklist[n].product, model_num)) { - quirks = sil_blacklist[n].quirk; - break; - } - - /* limit requests to 15 sectors */ - if (slow_down || - ((ap->flags & SIL_FLAG_MOD15WRITE) && - (quirks & SIL_QUIRK_MOD15WRITE))) { - ata_dev_printk(dev, KERN_INFO, "applying Seagate errata fix " - "(mod15write workaround)\n"); - dev->max_sectors = 15; - return; - } - - /* limit to udma5 */ - if (quirks & SIL_QUIRK_UDMA5MAX) { - ata_dev_printk(dev, KERN_INFO, - "applying Maxtor errata fix %s\n", model_num); - dev->udma_mask &= ATA_UDMA5; - return; - } -} - -static void sil_init_controller(struct pci_dev *pdev, - int n_ports, unsigned long host_flags, - void __iomem *mmio_base) -{ - u8 cls; - u32 tmp; - int i; - - /* Initialize FIFO PCI bus arbitration */ - cls = sil_get_device_cache_line(pdev); - if (cls) { - cls >>= 3; - cls++; /* cls = (line_size/8)+1 */ - for (i = 0; i < n_ports; i++) - writew(cls << 8 | cls, - mmio_base + sil_port[i].fifo_cfg); - } else - dev_printk(KERN_WARNING, &pdev->dev, - "cache line size not set. Driver may not function\n"); - - /* Apply R_ERR on DMA activate FIS errata workaround */ - if (host_flags & SIL_FLAG_RERR_ON_DMA_ACT) { - int cnt; - - for (i = 0, cnt = 0; i < n_ports; i++) { - tmp = readl(mmio_base + sil_port[i].sfis_cfg); - if ((tmp & 0x3) != 0x01) - continue; - if (!cnt) - dev_printk(KERN_INFO, &pdev->dev, - "Applying R_ERR on DMA activate " - "FIS errata fix\n"); - writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg); - cnt++; - } - } - - if (n_ports == 4) { - /* flip the magic "make 4 ports work" bit */ - tmp = readl(mmio_base + sil_port[2].bmdma); - if ((tmp & SIL_INTR_STEERING) == 0) - writel(tmp | SIL_INTR_STEERING, - mmio_base + sil_port[2].bmdma); - } -} - -static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int printed_version; - struct ata_probe_ent *probe_ent = NULL; - unsigned long base; - void __iomem *mmio_base; - int rc; - unsigned int i; - int pci_dev_busy = 0; - - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - pci_dev_busy = 1; - goto err_out; - } - - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - - probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); - if (probe_ent == NULL) { - rc = -ENOMEM; - goto err_out_regions; - } - - INIT_LIST_HEAD(&probe_ent->node); - probe_ent->dev = pci_dev_to_dev(pdev); - probe_ent->port_ops = sil_port_info[ent->driver_data].port_ops; - probe_ent->sht = sil_port_info[ent->driver_data].sht; - probe_ent->n_ports = (ent->driver_data == sil_3114) ? 4 : 2; - probe_ent->pio_mask = sil_port_info[ent->driver_data].pio_mask; - probe_ent->mwdma_mask = sil_port_info[ent->driver_data].mwdma_mask; - probe_ent->udma_mask = sil_port_info[ent->driver_data].udma_mask; - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = IRQF_SHARED; - probe_ent->host_flags = sil_port_info[ent->driver_data].host_flags; - - mmio_base = pci_iomap(pdev, 5, 0); - if (mmio_base == NULL) { - rc = -ENOMEM; - goto err_out_free_ent; - } - - probe_ent->mmio_base = mmio_base; - - base = (unsigned long) mmio_base; - - for (i = 0; i < probe_ent->n_ports; i++) { - probe_ent->port[i].cmd_addr = base + sil_port[i].tf; - probe_ent->port[i].altstatus_addr = - probe_ent->port[i].ctl_addr = base + sil_port[i].ctl; - probe_ent->port[i].bmdma_addr = base + sil_port[i].bmdma; - probe_ent->port[i].scr_addr = base + sil_port[i].scr; - ata_std_ports(&probe_ent->port[i]); - } - - sil_init_controller(pdev, probe_ent->n_ports, probe_ent->host_flags, - mmio_base); - - pci_set_master(pdev); - - /* FIXME: check ata_device_add return value */ - ata_device_add(probe_ent); - kfree(probe_ent); - - return 0; - -err_out_free_ent: - kfree(probe_ent); -err_out_regions: - pci_release_regions(pdev); -err_out: - if (!pci_dev_busy) - pci_disable_device(pdev); - return rc; -} - -static int sil_pci_device_resume(struct pci_dev *pdev) -{ - struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); - - ata_pci_device_do_resume(pdev); - sil_init_controller(pdev, host_set->n_ports, host_set->ports[0]->flags, - host_set->mmio_base); - ata_host_set_resume(host_set); - - return 0; -} - -static int __init sil_init(void) -{ - return pci_register_driver(&sil_pci_driver); -} - -static void __exit sil_exit(void) -{ - pci_unregister_driver(&sil_pci_driver); -} - - -module_init(sil_init); -module_exit(sil_exit); diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c deleted file mode 100644 index 3a0161ddc33..00000000000 --- a/drivers/scsi/sata_sil24.c +++ /dev/null @@ -1,1222 +0,0 @@ -/* - * sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers - * - * Copyright 2005 Tejun Heo - * - * Based on preview driver from Silicon Image. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "sata_sil24" -#define DRV_VERSION "0.3" - -/* - * Port request block (PRB) 32 bytes - */ -struct sil24_prb { - __le16 ctrl; - __le16 prot; - __le32 rx_cnt; - u8 fis[6 * 4]; -}; - -/* - * Scatter gather entry (SGE) 16 bytes - */ -struct sil24_sge { - __le64 addr; - __le32 cnt; - __le32 flags; -}; - -/* - * Port multiplier - */ -struct sil24_port_multiplier { - __le32 diag; - __le32 sactive; -}; - -enum { - /* - * Global controller registers (128 bytes @ BAR0) - */ - /* 32 bit regs */ - HOST_SLOT_STAT = 0x00, /* 32 bit slot stat * 4 */ - HOST_CTRL = 0x40, - HOST_IRQ_STAT = 0x44, - HOST_PHY_CFG = 0x48, - HOST_BIST_CTRL = 0x50, - HOST_BIST_PTRN = 0x54, - HOST_BIST_STAT = 0x58, - HOST_MEM_BIST_STAT = 0x5c, - HOST_FLASH_CMD = 0x70, - /* 8 bit regs */ - HOST_FLASH_DATA = 0x74, - HOST_TRANSITION_DETECT = 0x75, - HOST_GPIO_CTRL = 0x76, - HOST_I2C_ADDR = 0x78, /* 32 bit */ - HOST_I2C_DATA = 0x7c, - HOST_I2C_XFER_CNT = 0x7e, - HOST_I2C_CTRL = 0x7f, - - /* HOST_SLOT_STAT bits */ - HOST_SSTAT_ATTN = (1 << 31), - - /* HOST_CTRL bits */ - HOST_CTRL_M66EN = (1 << 16), /* M66EN PCI bus signal */ - HOST_CTRL_TRDY = (1 << 17), /* latched PCI TRDY */ - HOST_CTRL_STOP = (1 << 18), /* latched PCI STOP */ - HOST_CTRL_DEVSEL = (1 << 19), /* latched PCI DEVSEL */ - HOST_CTRL_REQ64 = (1 << 20), /* latched PCI REQ64 */ - HOST_CTRL_GLOBAL_RST = (1 << 31), /* global reset */ - - /* - * Port registers - * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2) - */ - PORT_REGS_SIZE = 0x2000, - - PORT_LRAM = 0x0000, /* 31 LRAM slots and PM regs */ - PORT_LRAM_SLOT_SZ = 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */ - - PORT_PM = 0x0f80, /* 8 bytes PM * 16 (128 bytes) */ - /* 32 bit regs */ - PORT_CTRL_STAT = 0x1000, /* write: ctrl-set, read: stat */ - PORT_CTRL_CLR = 0x1004, /* write: ctrl-clear */ - PORT_IRQ_STAT = 0x1008, /* high: status, low: interrupt */ - PORT_IRQ_ENABLE_SET = 0x1010, /* write: enable-set */ - PORT_IRQ_ENABLE_CLR = 0x1014, /* write: enable-clear */ - PORT_ACTIVATE_UPPER_ADDR= 0x101c, - PORT_EXEC_FIFO = 0x1020, /* command execution fifo */ - PORT_CMD_ERR = 0x1024, /* command error number */ - PORT_FIS_CFG = 0x1028, - PORT_FIFO_THRES = 0x102c, - /* 16 bit regs */ - PORT_DECODE_ERR_CNT = 0x1040, - PORT_DECODE_ERR_THRESH = 0x1042, - PORT_CRC_ERR_CNT = 0x1044, - PORT_CRC_ERR_THRESH = 0x1046, - PORT_HSHK_ERR_CNT = 0x1048, - PORT_HSHK_ERR_THRESH = 0x104a, - /* 32 bit regs */ - PORT_PHY_CFG = 0x1050, - PORT_SLOT_STAT = 0x1800, - PORT_CMD_ACTIVATE = 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */ - PORT_EXEC_DIAG = 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */ - PORT_PSD_DIAG = 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */ - PORT_SCONTROL = 0x1f00, - PORT_SSTATUS = 0x1f04, - PORT_SERROR = 0x1f08, - PORT_SACTIVE = 0x1f0c, - - /* PORT_CTRL_STAT bits */ - PORT_CS_PORT_RST = (1 << 0), /* port reset */ - PORT_CS_DEV_RST = (1 << 1), /* device reset */ - PORT_CS_INIT = (1 << 2), /* port initialize */ - PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */ - PORT_CS_CDB16 = (1 << 5), /* 0=12b cdb, 1=16b cdb */ - PORT_CS_RESUME = (1 << 6), /* port resume */ - PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */ - PORT_CS_PM_EN = (1 << 13), /* port multiplier enable */ - PORT_CS_RDY = (1 << 31), /* port ready to accept commands */ - - /* PORT_IRQ_STAT/ENABLE_SET/CLR */ - /* bits[11:0] are masked */ - PORT_IRQ_COMPLETE = (1 << 0), /* command(s) completed */ - PORT_IRQ_ERROR = (1 << 1), /* command execution error */ - PORT_IRQ_PORTRDY_CHG = (1 << 2), /* port ready change */ - PORT_IRQ_PWR_CHG = (1 << 3), /* power management change */ - PORT_IRQ_PHYRDY_CHG = (1 << 4), /* PHY ready change */ - PORT_IRQ_COMWAKE = (1 << 5), /* COMWAKE received */ - PORT_IRQ_UNK_FIS = (1 << 6), /* unknown FIS received */ - PORT_IRQ_DEV_XCHG = (1 << 7), /* device exchanged */ - PORT_IRQ_8B10B = (1 << 8), /* 8b/10b decode error threshold */ - PORT_IRQ_CRC = (1 << 9), /* CRC error threshold */ - PORT_IRQ_HANDSHAKE = (1 << 10), /* handshake error threshold */ - PORT_IRQ_SDB_NOTIFY = (1 << 11), /* SDB notify received */ - - DEF_PORT_IRQ = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | - PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG | - PORT_IRQ_UNK_FIS, - - /* bits[27:16] are unmasked (raw) */ - PORT_IRQ_RAW_SHIFT = 16, - PORT_IRQ_MASKED_MASK = 0x7ff, - PORT_IRQ_RAW_MASK = (0x7ff << PORT_IRQ_RAW_SHIFT), - - /* ENABLE_SET/CLR specific, intr steering - 2 bit field */ - PORT_IRQ_STEER_SHIFT = 30, - PORT_IRQ_STEER_MASK = (3 << PORT_IRQ_STEER_SHIFT), - - /* PORT_CMD_ERR constants */ - PORT_CERR_DEV = 1, /* Error bit in D2H Register FIS */ - PORT_CERR_SDB = 2, /* Error bit in SDB FIS */ - PORT_CERR_DATA = 3, /* Error in data FIS not detected by dev */ - PORT_CERR_SEND = 4, /* Initial cmd FIS transmission failure */ - PORT_CERR_INCONSISTENT = 5, /* Protocol mismatch */ - PORT_CERR_DIRECTION = 6, /* Data direction mismatch */ - PORT_CERR_UNDERRUN = 7, /* Ran out of SGEs while writing */ - PORT_CERR_OVERRUN = 8, /* Ran out of SGEs while reading */ - PORT_CERR_PKT_PROT = 11, /* DIR invalid in 1st PIO setup of ATAPI */ - PORT_CERR_SGT_BOUNDARY = 16, /* PLD ecode 00 - SGT not on qword boundary */ - PORT_CERR_SGT_TGTABRT = 17, /* PLD ecode 01 - target abort */ - PORT_CERR_SGT_MSTABRT = 18, /* PLD ecode 10 - master abort */ - PORT_CERR_SGT_PCIPERR = 19, /* PLD ecode 11 - PCI parity err while fetching SGT */ - PORT_CERR_CMD_BOUNDARY = 24, /* ctrl[15:13] 001 - PRB not on qword boundary */ - PORT_CERR_CMD_TGTABRT = 25, /* ctrl[15:13] 010 - target abort */ - PORT_CERR_CMD_MSTABRT = 26, /* ctrl[15:13] 100 - master abort */ - PORT_CERR_CMD_PCIPERR = 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */ - PORT_CERR_XFR_UNDEF = 32, /* PSD ecode 00 - undefined */ - PORT_CERR_XFR_TGTABRT = 33, /* PSD ecode 01 - target abort */ - PORT_CERR_XFR_MSTABRT = 34, /* PSD ecode 10 - master abort */ - PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */ - PORT_CERR_SENDSERVICE = 36, /* FIS received while sending service */ - - /* bits of PRB control field */ - PRB_CTRL_PROTOCOL = (1 << 0), /* override def. ATA protocol */ - PRB_CTRL_PACKET_READ = (1 << 4), /* PACKET cmd read */ - PRB_CTRL_PACKET_WRITE = (1 << 5), /* PACKET cmd write */ - PRB_CTRL_NIEN = (1 << 6), /* Mask completion irq */ - PRB_CTRL_SRST = (1 << 7), /* Soft reset request (ign BSY?) */ - - /* PRB protocol field */ - PRB_PROT_PACKET = (1 << 0), - PRB_PROT_TCQ = (1 << 1), - PRB_PROT_NCQ = (1 << 2), - PRB_PROT_READ = (1 << 3), - PRB_PROT_WRITE = (1 << 4), - PRB_PROT_TRANSPARENT = (1 << 5), - - /* - * Other constants - */ - SGE_TRM = (1 << 31), /* Last SGE in chain */ - SGE_LNK = (1 << 30), /* linked list - Points to SGT, not SGE */ - SGE_DRD = (1 << 29), /* discard data read (/dev/null) - data address ignored */ - - SIL24_MAX_CMDS = 31, - - /* board id */ - BID_SIL3124 = 0, - BID_SIL3132 = 1, - BID_SIL3131 = 2, - - /* host flags */ - SIL24_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | - ATA_FLAG_NCQ | ATA_FLAG_SKIP_D2H_BSY, - SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */ - - IRQ_STAT_4PORTS = 0xf, -}; - -struct sil24_ata_block { - struct sil24_prb prb; - struct sil24_sge sge[LIBATA_MAX_PRD]; -}; - -struct sil24_atapi_block { - struct sil24_prb prb; - u8 cdb[16]; - struct sil24_sge sge[LIBATA_MAX_PRD - 1]; -}; - -union sil24_cmd_block { - struct sil24_ata_block ata; - struct sil24_atapi_block atapi; -}; - -static struct sil24_cerr_info { - unsigned int err_mask, action; - const char *desc; -} sil24_cerr_db[] = { - [0] = { AC_ERR_DEV, ATA_EH_REVALIDATE, - "device error" }, - [PORT_CERR_DEV] = { AC_ERR_DEV, ATA_EH_REVALIDATE, - "device error via D2H FIS" }, - [PORT_CERR_SDB] = { AC_ERR_DEV, ATA_EH_REVALIDATE, - "device error via SDB FIS" }, - [PORT_CERR_DATA] = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET, - "error in data FIS" }, - [PORT_CERR_SEND] = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET, - "failed to transmit command FIS" }, - [PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_SOFTRESET, - "protocol mismatch" }, - [PORT_CERR_DIRECTION] = { AC_ERR_HSM, ATA_EH_SOFTRESET, - "data directon mismatch" }, - [PORT_CERR_UNDERRUN] = { AC_ERR_HSM, ATA_EH_SOFTRESET, - "ran out of SGEs while writing" }, - [PORT_CERR_OVERRUN] = { AC_ERR_HSM, ATA_EH_SOFTRESET, - "ran out of SGEs while reading" }, - [PORT_CERR_PKT_PROT] = { AC_ERR_HSM, ATA_EH_SOFTRESET, - "invalid data directon for ATAPI CDB" }, - [PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET, - "SGT no on qword boundary" }, - [PORT_CERR_SGT_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, - "PCI target abort while fetching SGT" }, - [PORT_CERR_SGT_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, - "PCI master abort while fetching SGT" }, - [PORT_CERR_SGT_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, - "PCI parity error while fetching SGT" }, - [PORT_CERR_CMD_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET, - "PRB not on qword boundary" }, - [PORT_CERR_CMD_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, - "PCI target abort while fetching PRB" }, - [PORT_CERR_CMD_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, - "PCI master abort while fetching PRB" }, - [PORT_CERR_CMD_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, - "PCI parity error while fetching PRB" }, - [PORT_CERR_XFR_UNDEF] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, - "undefined error while transferring data" }, - [PORT_CERR_XFR_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, - "PCI target abort while transferring data" }, - [PORT_CERR_XFR_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, - "PCI master abort while transferring data" }, - [PORT_CERR_XFR_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, - "PCI parity error while transferring data" }, - [PORT_CERR_SENDSERVICE] = { AC_ERR_HSM, ATA_EH_SOFTRESET, - "FIS received while sending service FIS" }, -}; - -/* - * ap->private_data - * - * The preview driver always returned 0 for status. We emulate it - * here from the previous interrupt. - */ -struct sil24_port_priv { - union sil24_cmd_block *cmd_block; /* 32 cmd blocks */ - dma_addr_t cmd_block_dma; /* DMA base addr for them */ - struct ata_taskfile tf; /* Cached taskfile registers */ -}; - -/* ap->host_set->private_data */ -struct sil24_host_priv { - void __iomem *host_base; /* global controller control (128 bytes @BAR0) */ - void __iomem *port_base; /* port registers (4 * 8192 bytes @BAR2) */ -}; - -static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev); -static u8 sil24_check_status(struct ata_port *ap); -static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg); -static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val); -static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf); -static void sil24_qc_prep(struct ata_queued_cmd *qc); -static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc); -static void sil24_irq_clear(struct ata_port *ap); -static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs); -static void sil24_freeze(struct ata_port *ap); -static void sil24_thaw(struct ata_port *ap); -static void sil24_error_handler(struct ata_port *ap); -static void sil24_post_internal_cmd(struct ata_queued_cmd *qc); -static int sil24_port_start(struct ata_port *ap); -static void sil24_port_stop(struct ata_port *ap); -static void sil24_host_stop(struct ata_host_set *host_set); -static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); -static int sil24_pci_device_resume(struct pci_dev *pdev); - -static const struct pci_device_id sil24_pci_tbl[] = { - { 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 }, - { 0x8086, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 }, - { 0x1095, 0x3132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3132 }, - { 0x1095, 0x3131, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 }, - { 0x1095, 0x3531, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 }, - { } /* terminate list */ -}; - -static struct pci_driver sil24_pci_driver = { - .name = DRV_NAME, - .id_table = sil24_pci_tbl, - .probe = sil24_init_one, - .remove = ata_pci_remove_one, /* safe? */ - .suspend = ata_pci_device_suspend, - .resume = sil24_pci_device_resume, -}; - -static struct scsi_host_template sil24_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .change_queue_depth = ata_scsi_change_queue_depth, - .can_queue = SIL24_MAX_CMDS, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, - .suspend = ata_scsi_device_suspend, - .resume = ata_scsi_device_resume, -}; - -static const struct ata_port_operations sil24_ops = { - .port_disable = ata_port_disable, - - .dev_config = sil24_dev_config, - - .check_status = sil24_check_status, - .check_altstatus = sil24_check_status, - .dev_select = ata_noop_dev_select, - - .tf_read = sil24_tf_read, - - .qc_prep = sil24_qc_prep, - .qc_issue = sil24_qc_issue, - - .irq_handler = sil24_interrupt, - .irq_clear = sil24_irq_clear, - - .scr_read = sil24_scr_read, - .scr_write = sil24_scr_write, - - .freeze = sil24_freeze, - .thaw = sil24_thaw, - .error_handler = sil24_error_handler, - .post_internal_cmd = sil24_post_internal_cmd, - - .port_start = sil24_port_start, - .port_stop = sil24_port_stop, - .host_stop = sil24_host_stop, -}; - -/* - * Use bits 30-31 of host_flags to encode available port numbers. - * Current maxium is 4. - */ -#define SIL24_NPORTS2FLAG(nports) ((((unsigned)(nports) - 1) & 0x3) << 30) -#define SIL24_FLAG2NPORTS(flag) ((((flag) >> 30) & 0x3) + 1) - -static struct ata_port_info sil24_port_info[] = { - /* sil_3124 */ - { - .sht = &sil24_sht, - .host_flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) | - SIL24_FLAG_PCIX_IRQ_WOC, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x3f, /* udma0-5 */ - .port_ops = &sil24_ops, - }, - /* sil_3132 */ - { - .sht = &sil24_sht, - .host_flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2), - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x3f, /* udma0-5 */ - .port_ops = &sil24_ops, - }, - /* sil_3131/sil_3531 */ - { - .sht = &sil24_sht, - .host_flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1), - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x3f, /* udma0-5 */ - .port_ops = &sil24_ops, - }, -}; - -static int sil24_tag(int tag) -{ - if (unlikely(ata_tag_internal(tag))) - return 0; - return tag; -} - -static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev) -{ - void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; - - if (dev->cdb_len == 16) - writel(PORT_CS_CDB16, port + PORT_CTRL_STAT); - else - writel(PORT_CS_CDB16, port + PORT_CTRL_CLR); -} - -static inline void sil24_update_tf(struct ata_port *ap) -{ - struct sil24_port_priv *pp = ap->private_data; - void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; - struct sil24_prb __iomem *prb = port; - u8 fis[6 * 4]; - - memcpy_fromio(fis, prb->fis, 6 * 4); - ata_tf_from_fis(fis, &pp->tf); -} - -static u8 sil24_check_status(struct ata_port *ap) -{ - struct sil24_port_priv *pp = ap->private_data; - return pp->tf.command; -} - -static int sil24_scr_map[] = { - [SCR_CONTROL] = 0, - [SCR_STATUS] = 1, - [SCR_ERROR] = 2, - [SCR_ACTIVE] = 3, -}; - -static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg) -{ - void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr; - if (sc_reg < ARRAY_SIZE(sil24_scr_map)) { - void __iomem *addr; - addr = scr_addr + sil24_scr_map[sc_reg] * 4; - return readl(scr_addr + sil24_scr_map[sc_reg] * 4); - } - return 0xffffffffU; -} - -static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val) -{ - void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr; - if (sc_reg < ARRAY_SIZE(sil24_scr_map)) { - void __iomem *addr; - addr = scr_addr + sil24_scr_map[sc_reg] * 4; - writel(val, scr_addr + sil24_scr_map[sc_reg] * 4); - } -} - -static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf) -{ - struct sil24_port_priv *pp = ap->private_data; - *tf = pp->tf; -} - -static int sil24_init_port(struct ata_port *ap) -{ - void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; - u32 tmp; - - writel(PORT_CS_INIT, port + PORT_CTRL_STAT); - ata_wait_register(port + PORT_CTRL_STAT, - PORT_CS_INIT, PORT_CS_INIT, 10, 100); - tmp = ata_wait_register(port + PORT_CTRL_STAT, - PORT_CS_RDY, 0, 10, 100); - - if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY) - return -EIO; - return 0; -} - -static int sil24_softreset(struct ata_port *ap, unsigned int *class) -{ - void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; - struct sil24_port_priv *pp = ap->private_data; - struct sil24_prb *prb = &pp->cmd_block[0].ata.prb; - dma_addr_t paddr = pp->cmd_block_dma; - u32 mask, irq_stat; - const char *reason; - - DPRINTK("ENTER\n"); - - if (ata_port_offline(ap)) { - DPRINTK("PHY reports no device\n"); - *class = ATA_DEV_NONE; - goto out; - } - - /* put the port into known state */ - if (sil24_init_port(ap)) { - reason ="port not ready"; - goto err; - } - - /* do SRST */ - prb->ctrl = cpu_to_le16(PRB_CTRL_SRST); - prb->fis[1] = 0; /* no PM yet */ - - writel((u32)paddr, port + PORT_CMD_ACTIVATE); - writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4); - - mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT; - irq_stat = ata_wait_register(port + PORT_IRQ_STAT, mask, 0x0, - 100, ATA_TMOUT_BOOT / HZ * 1000); - - writel(irq_stat, port + PORT_IRQ_STAT); /* clear IRQs */ - irq_stat >>= PORT_IRQ_RAW_SHIFT; - - if (!(irq_stat & PORT_IRQ_COMPLETE)) { - if (irq_stat & PORT_IRQ_ERROR) - reason = "SRST command error"; - else - reason = "timeout"; - goto err; - } - - sil24_update_tf(ap); - *class = ata_dev_classify(&pp->tf); - - if (*class == ATA_DEV_UNKNOWN) - *class = ATA_DEV_NONE; - - out: - DPRINTK("EXIT, class=%u\n", *class); - return 0; - - err: - ata_port_printk(ap, KERN_ERR, "softreset failed (%s)\n", reason); - return -EIO; -} - -static int sil24_hardreset(struct ata_port *ap, unsigned int *class) -{ - void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; - const char *reason; - int tout_msec, rc; - u32 tmp; - - /* sil24 does the right thing(tm) without any protection */ - sata_set_spd(ap); - - tout_msec = 100; - if (ata_port_online(ap)) - tout_msec = 5000; - - writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT); - tmp = ata_wait_register(port + PORT_CTRL_STAT, - PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10, tout_msec); - - /* SStatus oscillates between zero and valid status after - * DEV_RST, debounce it. - */ - rc = sata_phy_debounce(ap, sata_deb_timing_long); - if (rc) { - reason = "PHY debouncing failed"; - goto err; - } - - if (tmp & PORT_CS_DEV_RST) { - if (ata_port_offline(ap)) - return 0; - reason = "link not ready"; - goto err; - } - - /* Sil24 doesn't store signature FIS after hardreset, so we - * can't wait for BSY to clear. Some devices take a long time - * to get ready and those devices will choke if we don't wait - * for BSY clearance here. Tell libata to perform follow-up - * softreset. - */ - return -EAGAIN; - - err: - ata_port_printk(ap, KERN_ERR, "hardreset failed (%s)\n", reason); - return -EIO; -} - -static inline void sil24_fill_sg(struct ata_queued_cmd *qc, - struct sil24_sge *sge) -{ - struct scatterlist *sg; - unsigned int idx = 0; - - ata_for_each_sg(sg, qc) { - sge->addr = cpu_to_le64(sg_dma_address(sg)); - sge->cnt = cpu_to_le32(sg_dma_len(sg)); - if (ata_sg_is_last(sg, qc)) - sge->flags = cpu_to_le32(SGE_TRM); - else - sge->flags = 0; - - sge++; - idx++; - } -} - -static void sil24_qc_prep(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct sil24_port_priv *pp = ap->private_data; - union sil24_cmd_block *cb; - struct sil24_prb *prb; - struct sil24_sge *sge; - u16 ctrl = 0; - - cb = &pp->cmd_block[sil24_tag(qc->tag)]; - - switch (qc->tf.protocol) { - case ATA_PROT_PIO: - case ATA_PROT_DMA: - case ATA_PROT_NCQ: - case ATA_PROT_NODATA: - prb = &cb->ata.prb; - sge = cb->ata.sge; - break; - - case ATA_PROT_ATAPI: - case ATA_PROT_ATAPI_DMA: - case ATA_PROT_ATAPI_NODATA: - prb = &cb->atapi.prb; - sge = cb->atapi.sge; - memset(cb->atapi.cdb, 0, 32); - memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len); - - if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) { - if (qc->tf.flags & ATA_TFLAG_WRITE) - ctrl = PRB_CTRL_PACKET_WRITE; - else - ctrl = PRB_CTRL_PACKET_READ; - } - break; - - default: - prb = NULL; /* shut up, gcc */ - sge = NULL; - BUG(); - } - - prb->ctrl = cpu_to_le16(ctrl); - ata_tf_to_fis(&qc->tf, prb->fis, 0); - - if (qc->flags & ATA_QCFLAG_DMAMAP) - sil24_fill_sg(qc, sge); -} - -static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct sil24_port_priv *pp = ap->private_data; - void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; - unsigned int tag = sil24_tag(qc->tag); - dma_addr_t paddr; - void __iomem *activate; - - paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block); - activate = port + PORT_CMD_ACTIVATE + tag * 8; - - writel((u32)paddr, activate); - writel((u64)paddr >> 32, activate + 4); - - return 0; -} - -static void sil24_irq_clear(struct ata_port *ap) -{ - /* unused */ -} - -static void sil24_freeze(struct ata_port *ap) -{ - void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; - - /* Port-wide IRQ mask in HOST_CTRL doesn't really work, clear - * PORT_IRQ_ENABLE instead. - */ - writel(0xffff, port + PORT_IRQ_ENABLE_CLR); -} - -static void sil24_thaw(struct ata_port *ap) -{ - void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; - u32 tmp; - - /* clear IRQ */ - tmp = readl(port + PORT_IRQ_STAT); - writel(tmp, port + PORT_IRQ_STAT); - - /* turn IRQ back on */ - writel(DEF_PORT_IRQ, port + PORT_IRQ_ENABLE_SET); -} - -static void sil24_error_intr(struct ata_port *ap) -{ - void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; - struct ata_eh_info *ehi = &ap->eh_info; - int freeze = 0; - u32 irq_stat; - - /* on error, we need to clear IRQ explicitly */ - irq_stat = readl(port + PORT_IRQ_STAT); - writel(irq_stat, port + PORT_IRQ_STAT); - - /* first, analyze and record host port events */ - ata_ehi_clear_desc(ehi); - - ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat); - - if (irq_stat & (PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG)) { - ata_ehi_hotplugged(ehi); - ata_ehi_push_desc(ehi, ", %s", - irq_stat & PORT_IRQ_PHYRDY_CHG ? - "PHY RDY changed" : "device exchanged"); - freeze = 1; - } - - if (irq_stat & PORT_IRQ_UNK_FIS) { - ehi->err_mask |= AC_ERR_HSM; - ehi->action |= ATA_EH_SOFTRESET; - ata_ehi_push_desc(ehi , ", unknown FIS"); - freeze = 1; - } - - /* deal with command error */ - if (irq_stat & PORT_IRQ_ERROR) { - struct sil24_cerr_info *ci = NULL; - unsigned int err_mask = 0, action = 0; - struct ata_queued_cmd *qc; - u32 cerr; - - /* analyze CMD_ERR */ - cerr = readl(port + PORT_CMD_ERR); - if (cerr < ARRAY_SIZE(sil24_cerr_db)) - ci = &sil24_cerr_db[cerr]; - - if (ci && ci->desc) { - err_mask |= ci->err_mask; - action |= ci->action; - ata_ehi_push_desc(ehi, ", %s", ci->desc); - } else { - err_mask |= AC_ERR_OTHER; - action |= ATA_EH_SOFTRESET; - ata_ehi_push_desc(ehi, ", unknown command error %d", - cerr); - } - - /* record error info */ - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc) { - sil24_update_tf(ap); - qc->err_mask |= err_mask; - } else - ehi->err_mask |= err_mask; - - ehi->action |= action; - } - - /* freeze or abort */ - if (freeze) - ata_port_freeze(ap); - else - ata_port_abort(ap); -} - -static void sil24_finish_qc(struct ata_queued_cmd *qc) -{ - if (qc->flags & ATA_QCFLAG_RESULT_TF) - sil24_update_tf(qc->ap); -} - -static inline void sil24_host_intr(struct ata_port *ap) -{ - void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; - u32 slot_stat, qc_active; - int rc; - - slot_stat = readl(port + PORT_SLOT_STAT); - - if (unlikely(slot_stat & HOST_SSTAT_ATTN)) { - sil24_error_intr(ap); - return; - } - - if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) - writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT); - - qc_active = slot_stat & ~HOST_SSTAT_ATTN; - rc = ata_qc_complete_multiple(ap, qc_active, sil24_finish_qc); - if (rc > 0) - return; - if (rc < 0) { - struct ata_eh_info *ehi = &ap->eh_info; - ehi->err_mask |= AC_ERR_HSM; - ehi->action |= ATA_EH_SOFTRESET; - ata_port_freeze(ap); - return; - } - - if (ata_ratelimit()) - ata_port_printk(ap, KERN_INFO, "spurious interrupt " - "(slot_stat 0x%x active_tag %d sactive 0x%x)\n", - slot_stat, ap->active_tag, ap->sactive); -} - -static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - struct sil24_host_priv *hpriv = host_set->private_data; - unsigned handled = 0; - u32 status; - int i; - - status = readl(hpriv->host_base + HOST_IRQ_STAT); - - if (status == 0xffffffff) { - printk(KERN_ERR DRV_NAME ": IRQ status == 0xffffffff, " - "PCI fault or device removal?\n"); - goto out; - } - - if (!(status & IRQ_STAT_4PORTS)) - goto out; - - spin_lock(&host_set->lock); - - for (i = 0; i < host_set->n_ports; i++) - if (status & (1 << i)) { - struct ata_port *ap = host_set->ports[i]; - if (ap && !(ap->flags & ATA_FLAG_DISABLED)) { - sil24_host_intr(host_set->ports[i]); - handled++; - } else - printk(KERN_ERR DRV_NAME - ": interrupt from disabled port %d\n", i); - } - - spin_unlock(&host_set->lock); - out: - return IRQ_RETVAL(handled); -} - -static void sil24_error_handler(struct ata_port *ap) -{ - struct ata_eh_context *ehc = &ap->eh_context; - - if (sil24_init_port(ap)) { - ata_eh_freeze_port(ap); - ehc->i.action |= ATA_EH_HARDRESET; - } - - /* perform recovery */ - ata_do_eh(ap, ata_std_prereset, sil24_softreset, sil24_hardreset, - ata_std_postreset); -} - -static void sil24_post_internal_cmd(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - if (qc->flags & ATA_QCFLAG_FAILED) - qc->err_mask |= AC_ERR_OTHER; - - /* make DMA engine forget about the failed command */ - if (qc->err_mask) - sil24_init_port(ap); -} - -static inline void sil24_cblk_free(struct sil24_port_priv *pp, struct device *dev) -{ - const size_t cb_size = sizeof(*pp->cmd_block) * SIL24_MAX_CMDS; - - dma_free_coherent(dev, cb_size, pp->cmd_block, pp->cmd_block_dma); -} - -static int sil24_port_start(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct sil24_port_priv *pp; - union sil24_cmd_block *cb; - size_t cb_size = sizeof(*cb) * SIL24_MAX_CMDS; - dma_addr_t cb_dma; - int rc = -ENOMEM; - - pp = kzalloc(sizeof(*pp), GFP_KERNEL); - if (!pp) - goto err_out; - - pp->tf.command = ATA_DRDY; - - cb = dma_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL); - if (!cb) - goto err_out_pp; - memset(cb, 0, cb_size); - - rc = ata_pad_alloc(ap, dev); - if (rc) - goto err_out_pad; - - pp->cmd_block = cb; - pp->cmd_block_dma = cb_dma; - - ap->private_data = pp; - - return 0; - -err_out_pad: - sil24_cblk_free(pp, dev); -err_out_pp: - kfree(pp); -err_out: - return rc; -} - -static void sil24_port_stop(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct sil24_port_priv *pp = ap->private_data; - - sil24_cblk_free(pp, dev); - ata_pad_free(ap, dev); - kfree(pp); -} - -static void sil24_host_stop(struct ata_host_set *host_set) -{ - struct sil24_host_priv *hpriv = host_set->private_data; - struct pci_dev *pdev = to_pci_dev(host_set->dev); - - pci_iounmap(pdev, hpriv->host_base); - pci_iounmap(pdev, hpriv->port_base); - kfree(hpriv); -} - -static void sil24_init_controller(struct pci_dev *pdev, int n_ports, - unsigned long host_flags, - void __iomem *host_base, - void __iomem *port_base) -{ - u32 tmp; - int i; - - /* GPIO off */ - writel(0, host_base + HOST_FLASH_CMD); - - /* clear global reset & mask interrupts during initialization */ - writel(0, host_base + HOST_CTRL); - - /* init ports */ - for (i = 0; i < n_ports; i++) { - void __iomem *port = port_base + i * PORT_REGS_SIZE; - - /* Initial PHY setting */ - writel(0x20c, port + PORT_PHY_CFG); - - /* Clear port RST */ - tmp = readl(port + PORT_CTRL_STAT); - if (tmp & PORT_CS_PORT_RST) { - writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); - tmp = ata_wait_register(port + PORT_CTRL_STAT, - PORT_CS_PORT_RST, - PORT_CS_PORT_RST, 10, 100); - if (tmp & PORT_CS_PORT_RST) - dev_printk(KERN_ERR, &pdev->dev, - "failed to clear port RST\n"); - } - - /* Configure IRQ WoC */ - if (host_flags & SIL24_FLAG_PCIX_IRQ_WOC) - writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT); - else - writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); - - /* Zero error counters. */ - writel(0x8000, port + PORT_DECODE_ERR_THRESH); - writel(0x8000, port + PORT_CRC_ERR_THRESH); - writel(0x8000, port + PORT_HSHK_ERR_THRESH); - writel(0x0000, port + PORT_DECODE_ERR_CNT); - writel(0x0000, port + PORT_CRC_ERR_CNT); - writel(0x0000, port + PORT_HSHK_ERR_CNT); - - /* Always use 64bit activation */ - writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR); - - /* Clear port multiplier enable and resume bits */ - writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR); - } - - /* Turn on interrupts */ - writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL); -} - -static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int printed_version = 0; - unsigned int board_id = (unsigned int)ent->driver_data; - struct ata_port_info *pinfo = &sil24_port_info[board_id]; - struct ata_probe_ent *probe_ent = NULL; - struct sil24_host_priv *hpriv = NULL; - void __iomem *host_base = NULL; - void __iomem *port_base = NULL; - int i, rc; - u32 tmp; - - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) - goto out_disable; - - rc = -ENOMEM; - /* map mmio registers */ - host_base = pci_iomap(pdev, 0, 0); - if (!host_base) - goto out_free; - port_base = pci_iomap(pdev, 2, 0); - if (!port_base) - goto out_free; - - /* allocate & init probe_ent and hpriv */ - probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); - if (!probe_ent) - goto out_free; - - hpriv = kzalloc(sizeof(*hpriv), GFP_KERNEL); - if (!hpriv) - goto out_free; - - probe_ent->dev = pci_dev_to_dev(pdev); - INIT_LIST_HEAD(&probe_ent->node); - - probe_ent->sht = pinfo->sht; - probe_ent->host_flags = pinfo->host_flags; - probe_ent->pio_mask = pinfo->pio_mask; - probe_ent->mwdma_mask = pinfo->mwdma_mask; - probe_ent->udma_mask = pinfo->udma_mask; - probe_ent->port_ops = pinfo->port_ops; - probe_ent->n_ports = SIL24_FLAG2NPORTS(pinfo->host_flags); - - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = IRQF_SHARED; - probe_ent->private_data = hpriv; - - hpriv->host_base = host_base; - hpriv->port_base = port_base; - - /* - * Configure the device - */ - if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { - rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); - if (rc) { - rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "64-bit DMA enable failed\n"); - goto out_free; - } - } - } else { - rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "32-bit DMA enable failed\n"); - goto out_free; - } - rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "32-bit consistent DMA enable failed\n"); - goto out_free; - } - } - - /* Apply workaround for completion IRQ loss on PCI-X errata */ - if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC) { - tmp = readl(host_base + HOST_CTRL); - if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL)) - dev_printk(KERN_INFO, &pdev->dev, - "Applying completion IRQ loss on PCI-X " - "errata fix\n"); - else - probe_ent->host_flags &= ~SIL24_FLAG_PCIX_IRQ_WOC; - } - - for (i = 0; i < probe_ent->n_ports; i++) { - unsigned long portu = - (unsigned long)port_base + i * PORT_REGS_SIZE; - - probe_ent->port[i].cmd_addr = portu; - probe_ent->port[i].scr_addr = portu + PORT_SCONTROL; - - ata_std_ports(&probe_ent->port[i]); - } - - sil24_init_controller(pdev, probe_ent->n_ports, probe_ent->host_flags, - host_base, port_base); - - pci_set_master(pdev); - - /* FIXME: check ata_device_add return value */ - ata_device_add(probe_ent); - - kfree(probe_ent); - return 0; - - out_free: - if (host_base) - pci_iounmap(pdev, host_base); - if (port_base) - pci_iounmap(pdev, port_base); - kfree(probe_ent); - kfree(hpriv); - pci_release_regions(pdev); - out_disable: - pci_disable_device(pdev); - return rc; -} - -static int sil24_pci_device_resume(struct pci_dev *pdev) -{ - struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); - struct sil24_host_priv *hpriv = host_set->private_data; - - ata_pci_device_do_resume(pdev); - - if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) - writel(HOST_CTRL_GLOBAL_RST, hpriv->host_base + HOST_CTRL); - - sil24_init_controller(pdev, host_set->n_ports, - host_set->ports[0]->flags, - hpriv->host_base, hpriv->port_base); - - ata_host_set_resume(host_set); - - return 0; -} - -static int __init sil24_init(void) -{ - return pci_register_driver(&sil24_pci_driver); -} - -static void __exit sil24_exit(void) -{ - pci_unregister_driver(&sil24_pci_driver); -} - -MODULE_AUTHOR("Tejun Heo"); -MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, sil24_pci_tbl); - -module_init(sil24_init); -module_exit(sil24_exit); diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c deleted file mode 100644 index ac24f66897f..00000000000 --- a/drivers/scsi/sata_sis.c +++ /dev/null @@ -1,347 +0,0 @@ -/* - * sata_sis.c - Silicon Integrated Systems SATA - * - * Maintained by: Uwe Koziolek - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * Copyright 2004 Uwe Koziolek - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Hardware documentation available under NDA. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "sata_sis" -#define DRV_VERSION "0.6" - -enum { - sis_180 = 0, - SIS_SCR_PCI_BAR = 5, - - /* PCI configuration registers */ - SIS_GENCTL = 0x54, /* IDE General Control register */ - SIS_SCR_BASE = 0xc0, /* sata0 phy SCR registers */ - SIS180_SATA1_OFS = 0x10, /* offset from sata0->sata1 phy regs */ - SIS182_SATA1_OFS = 0x20, /* offset from sata0->sata1 phy regs */ - SIS_PMR = 0x90, /* port mapping register */ - SIS_PMR_COMBINED = 0x30, - - /* random bits */ - SIS_FLAG_CFGSCR = (1 << 30), /* host flag: SCRs via PCI cfg */ - - GENCTL_IOMAPPED_SCR = (1 << 26), /* if set, SCRs are in IO space */ -}; - -static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg); -static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); - -static const struct pci_device_id sis_pci_tbl[] = { - { PCI_VENDOR_ID_SI, 0x180, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 }, - { PCI_VENDOR_ID_SI, 0x181, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 }, - { PCI_VENDOR_ID_SI, 0x182, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 }, - { } /* terminate list */ -}; - - -static struct pci_driver sis_pci_driver = { - .name = DRV_NAME, - .id_table = sis_pci_tbl, - .probe = sis_init_one, - .remove = ata_pci_remove_one, -}; - -static struct scsi_host_template sis_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = ATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, -}; - -static const struct ata_port_operations sis_ops = { - .port_disable = ata_port_disable, - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = ata_bmdma_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .scr_read = sis_scr_read, - .scr_write = sis_scr_write, - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop, -}; - -static struct ata_port_info sis_port_info = { - .sht = &sis_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, - .mwdma_mask = 0x7, - .udma_mask = 0x7f, - .port_ops = &sis_ops, -}; - - -MODULE_AUTHOR("Uwe Koziolek"); -MODULE_DESCRIPTION("low-level driver for Silicon Integratad Systems SATA controller"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, sis_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -static unsigned int get_scr_cfg_addr(unsigned int port_no, unsigned int sc_reg, int device) -{ - unsigned int addr = SIS_SCR_BASE + (4 * sc_reg); - - if (port_no) { - if (device == 0x182) - addr += SIS182_SATA1_OFS; - else - addr += SIS180_SATA1_OFS; - } - - return addr; -} - -static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg) -{ - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg, pdev->device); - u32 val, val2 = 0; - u8 pmr; - - if (sc_reg == SCR_ERROR) /* doesn't exist in PCI cfg space */ - return 0xffffffff; - - pci_read_config_byte(pdev, SIS_PMR, &pmr); - - pci_read_config_dword(pdev, cfg_addr, &val); - - if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) - pci_read_config_dword(pdev, cfg_addr+0x10, &val2); - - return val|val2; -} - -static void sis_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val) -{ - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, scr, pdev->device); - u8 pmr; - - if (scr == SCR_ERROR) /* doesn't exist in PCI cfg space */ - return; - - pci_read_config_byte(pdev, SIS_PMR, &pmr); - - pci_write_config_dword(pdev, cfg_addr, val); - - if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) - pci_write_config_dword(pdev, cfg_addr+0x10, val); -} - -static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg) -{ - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - u32 val, val2 = 0; - u8 pmr; - - if (sc_reg > SCR_CONTROL) - return 0xffffffffU; - - if (ap->flags & SIS_FLAG_CFGSCR) - return sis_scr_cfg_read(ap, sc_reg); - - pci_read_config_byte(pdev, SIS_PMR, &pmr); - - val = inl(ap->ioaddr.scr_addr + (sc_reg * 4)); - - if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) - val2 = inl(ap->ioaddr.scr_addr + (sc_reg * 4) + 0x10); - - return val | val2; -} - -static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) -{ - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - u8 pmr; - - if (sc_reg > SCR_CONTROL) - return; - - pci_read_config_byte(pdev, SIS_PMR, &pmr); - - if (ap->flags & SIS_FLAG_CFGSCR) - sis_scr_cfg_write(ap, sc_reg, val); - else { - outl(val, ap->ioaddr.scr_addr + (sc_reg * 4)); - if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) - outl(val, ap->ioaddr.scr_addr + (sc_reg * 4)+0x10); - } -} - -static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int printed_version; - struct ata_probe_ent *probe_ent = NULL; - int rc; - u32 genctl; - struct ata_port_info *ppi; - int pci_dev_busy = 0; - u8 pmr; - u8 port2_start; - - if (!printed_version++) - dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - pci_dev_busy = 1; - goto err_out; - } - - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - - ppi = &sis_port_info; - probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); - if (!probe_ent) { - rc = -ENOMEM; - goto err_out_regions; - } - - /* check and see if the SCRs are in IO space or PCI cfg space */ - pci_read_config_dword(pdev, SIS_GENCTL, &genctl); - if ((genctl & GENCTL_IOMAPPED_SCR) == 0) - probe_ent->host_flags |= SIS_FLAG_CFGSCR; - - /* if hardware thinks SCRs are in IO space, but there are - * no IO resources assigned, change to PCI cfg space. - */ - if ((!(probe_ent->host_flags & SIS_FLAG_CFGSCR)) && - ((pci_resource_start(pdev, SIS_SCR_PCI_BAR) == 0) || - (pci_resource_len(pdev, SIS_SCR_PCI_BAR) < 128))) { - genctl &= ~GENCTL_IOMAPPED_SCR; - pci_write_config_dword(pdev, SIS_GENCTL, genctl); - probe_ent->host_flags |= SIS_FLAG_CFGSCR; - } - - pci_read_config_byte(pdev, SIS_PMR, &pmr); - if (ent->device != 0x182) { - if ((pmr & SIS_PMR_COMBINED) == 0) { - dev_printk(KERN_INFO, &pdev->dev, - "Detected SiS 180/181 chipset in SATA mode\n"); - port2_start = 64; - } - else { - dev_printk(KERN_INFO, &pdev->dev, - "Detected SiS 180/181 chipset in combined mode\n"); - port2_start=0; - } - } - else { - dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182 chipset\n"); - port2_start = 0x20; - } - - if (!(probe_ent->host_flags & SIS_FLAG_CFGSCR)) { - probe_ent->port[0].scr_addr = - pci_resource_start(pdev, SIS_SCR_PCI_BAR); - probe_ent->port[1].scr_addr = - pci_resource_start(pdev, SIS_SCR_PCI_BAR) + port2_start; - } - - pci_set_master(pdev); - pci_intx(pdev, 1); - - /* FIXME: check ata_device_add return value */ - ata_device_add(probe_ent); - kfree(probe_ent); - - return 0; - -err_out_regions: - pci_release_regions(pdev); - -err_out: - if (!pci_dev_busy) - pci_disable_device(pdev); - return rc; - -} - -static int __init sis_init(void) -{ - return pci_register_driver(&sis_pci_driver); -} - -static void __exit sis_exit(void) -{ - pci_unregister_driver(&sis_pci_driver); -} - -module_init(sis_init); -module_exit(sis_exit); - diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c deleted file mode 100644 index baf259a966d..00000000000 --- a/drivers/scsi/sata_svw.c +++ /dev/null @@ -1,508 +0,0 @@ -/* - * sata_svw.c - ServerWorks / Apple K2 SATA - * - * Maintained by: Benjamin Herrenschmidt and - * Jeff Garzik - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * Copyright 2003 Benjamin Herrenschmidt - * - * Bits from Jeff Garzik, Copyright RedHat, Inc. - * - * This driver probably works with non-Apple versions of the - * Broadcom chipset... - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Hardware documentation available under NDA. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_PPC_OF -#include -#include -#endif /* CONFIG_PPC_OF */ - -#define DRV_NAME "sata_svw" -#define DRV_VERSION "2.0" - -enum { - /* Taskfile registers offsets */ - K2_SATA_TF_CMD_OFFSET = 0x00, - K2_SATA_TF_DATA_OFFSET = 0x00, - K2_SATA_TF_ERROR_OFFSET = 0x04, - K2_SATA_TF_NSECT_OFFSET = 0x08, - K2_SATA_TF_LBAL_OFFSET = 0x0c, - K2_SATA_TF_LBAM_OFFSET = 0x10, - K2_SATA_TF_LBAH_OFFSET = 0x14, - K2_SATA_TF_DEVICE_OFFSET = 0x18, - K2_SATA_TF_CMDSTAT_OFFSET = 0x1c, - K2_SATA_TF_CTL_OFFSET = 0x20, - - /* DMA base */ - K2_SATA_DMA_CMD_OFFSET = 0x30, - - /* SCRs base */ - K2_SATA_SCR_STATUS_OFFSET = 0x40, - K2_SATA_SCR_ERROR_OFFSET = 0x44, - K2_SATA_SCR_CONTROL_OFFSET = 0x48, - - /* Others */ - K2_SATA_SICR1_OFFSET = 0x80, - K2_SATA_SICR2_OFFSET = 0x84, - K2_SATA_SIM_OFFSET = 0x88, - - /* Port stride */ - K2_SATA_PORT_OFFSET = 0x100, -}; - -static u8 k2_stat_check_status(struct ata_port *ap); - - -static u32 k2_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) -{ - if (sc_reg > SCR_CONTROL) - return 0xffffffffU; - return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4)); -} - - -static void k2_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, - u32 val) -{ - if (sc_reg > SCR_CONTROL) - return; - writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4)); -} - - -static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; - - if (tf->ctl != ap->last_ctl) { - writeb(tf->ctl, ioaddr->ctl_addr); - ap->last_ctl = tf->ctl; - ata_wait_idle(ap); - } - if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { - writew(tf->feature | (((u16)tf->hob_feature) << 8), ioaddr->feature_addr); - writew(tf->nsect | (((u16)tf->hob_nsect) << 8), ioaddr->nsect_addr); - writew(tf->lbal | (((u16)tf->hob_lbal) << 8), ioaddr->lbal_addr); - writew(tf->lbam | (((u16)tf->hob_lbam) << 8), ioaddr->lbam_addr); - writew(tf->lbah | (((u16)tf->hob_lbah) << 8), ioaddr->lbah_addr); - } else if (is_addr) { - writew(tf->feature, ioaddr->feature_addr); - writew(tf->nsect, ioaddr->nsect_addr); - writew(tf->lbal, ioaddr->lbal_addr); - writew(tf->lbam, ioaddr->lbam_addr); - writew(tf->lbah, ioaddr->lbah_addr); - } - - if (tf->flags & ATA_TFLAG_DEVICE) - writeb(tf->device, ioaddr->device_addr); - - ata_wait_idle(ap); -} - - -static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - u16 nsect, lbal, lbam, lbah, feature; - - tf->command = k2_stat_check_status(ap); - tf->device = readw(ioaddr->device_addr); - feature = readw(ioaddr->error_addr); - nsect = readw(ioaddr->nsect_addr); - lbal = readw(ioaddr->lbal_addr); - lbam = readw(ioaddr->lbam_addr); - lbah = readw(ioaddr->lbah_addr); - - tf->feature = feature; - tf->nsect = nsect; - tf->lbal = lbal; - tf->lbam = lbam; - tf->lbah = lbah; - - if (tf->flags & ATA_TFLAG_LBA48) { - tf->hob_feature = feature >> 8; - tf->hob_nsect = nsect >> 8; - tf->hob_lbal = lbal >> 8; - tf->hob_lbam = lbam >> 8; - tf->hob_lbah = lbah >> 8; - } -} - -/** - * k2_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction (MMIO) - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void k2_bmdma_setup_mmio (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); - u8 dmactl; - void *mmio = (void *) ap->ioaddr.bmdma_addr; - /* load PRD table addr. */ - mb(); /* make sure PRD table writes are visible to controller */ - writel(ap->prd_dma, mmio + ATA_DMA_TABLE_OFS); - - /* specify data direction, triple-check start bit is clear */ - dmactl = readb(mmio + ATA_DMA_CMD); - dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); - if (!rw) - dmactl |= ATA_DMA_WR; - writeb(dmactl, mmio + ATA_DMA_CMD); - - /* issue r/w command if this is not a ATA DMA command*/ - if (qc->tf.protocol != ATA_PROT_DMA) - ap->ops->exec_command(ap, &qc->tf); -} - -/** - * k2_bmdma_start_mmio - Start a PCI IDE BMDMA transaction (MMIO) - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void k2_bmdma_start_mmio (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - void *mmio = (void *) ap->ioaddr.bmdma_addr; - u8 dmactl; - - /* start host DMA transaction */ - dmactl = readb(mmio + ATA_DMA_CMD); - writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD); - /* There is a race condition in certain SATA controllers that can - be seen when the r/w command is given to the controller before the - host DMA is started. On a Read command, the controller would initiate - the command to the drive even before it sees the DMA start. When there - are very fast drives connected to the controller, or when the data request - hits in the drive cache, there is the possibility that the drive returns a part - or all of the requested data to the controller before the DMA start is issued. - In this case, the controller would become confused as to what to do with the data. - In the worst case when all the data is returned back to the controller, the - controller could hang. In other cases it could return partial data returning - in data corruption. This problem has been seen in PPC systems and can also appear - on an system with very fast disks, where the SATA controller is sitting behind a - number of bridges, and hence there is significant latency between the r/w command - and the start command. */ - /* issue r/w command if the access is to ATA*/ - if (qc->tf.protocol == ATA_PROT_DMA) - ap->ops->exec_command(ap, &qc->tf); -} - - -static u8 k2_stat_check_status(struct ata_port *ap) -{ - return readl((void *) ap->ioaddr.status_addr); -} - -#ifdef CONFIG_PPC_OF -/* - * k2_sata_proc_info - * inout : decides on the direction of the dataflow and the meaning of the - * variables - * buffer: If inout==FALSE data is being written to it else read from it - * *start: If inout==FALSE start of the valid data in the buffer - * offset: If inout==FALSE offset from the beginning of the imaginary file - * from which we start writing into the buffer - * length: If inout==FALSE max number of bytes to be written into the buffer - * else number of bytes in the buffer - */ -static int k2_sata_proc_info(struct Scsi_Host *shost, char *page, char **start, - off_t offset, int count, int inout) -{ - struct ata_port *ap; - struct device_node *np; - int len, index; - - /* Find the ata_port */ - ap = ata_shost_to_port(shost); - if (ap == NULL) - return 0; - - /* Find the OF node for the PCI device proper */ - np = pci_device_to_OF_node(to_pci_dev(ap->host_set->dev)); - if (np == NULL) - return 0; - - /* Match it to a port node */ - index = (ap == ap->host_set->ports[0]) ? 0 : 1; - for (np = np->child; np != NULL; np = np->sibling) { - u32 *reg = (u32 *)get_property(np, "reg", NULL); - if (!reg) - continue; - if (index == *reg) - break; - } - if (np == NULL) - return 0; - - len = sprintf(page, "devspec: %s\n", np->full_name); - - return len; -} -#endif /* CONFIG_PPC_OF */ - - -static struct scsi_host_template k2_sata_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, -#ifdef CONFIG_PPC_OF - .proc_info = k2_sata_proc_info, -#endif - .bios_param = ata_std_bios_param, -}; - - -static const struct ata_port_operations k2_sata_ops = { - .port_disable = ata_port_disable, - .tf_load = k2_sata_tf_load, - .tf_read = k2_sata_tf_read, - .check_status = k2_stat_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - .bmdma_setup = k2_bmdma_setup_mmio, - .bmdma_start = k2_bmdma_start_mmio, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_mmio_data_xfer, - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = ata_bmdma_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .scr_read = k2_sata_scr_read, - .scr_write = k2_sata_scr_write, - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_pci_host_stop, -}; - -static void k2_sata_setup_port(struct ata_ioports *port, unsigned long base) -{ - port->cmd_addr = base + K2_SATA_TF_CMD_OFFSET; - port->data_addr = base + K2_SATA_TF_DATA_OFFSET; - port->feature_addr = - port->error_addr = base + K2_SATA_TF_ERROR_OFFSET; - port->nsect_addr = base + K2_SATA_TF_NSECT_OFFSET; - port->lbal_addr = base + K2_SATA_TF_LBAL_OFFSET; - port->lbam_addr = base + K2_SATA_TF_LBAM_OFFSET; - port->lbah_addr = base + K2_SATA_TF_LBAH_OFFSET; - port->device_addr = base + K2_SATA_TF_DEVICE_OFFSET; - port->command_addr = - port->status_addr = base + K2_SATA_TF_CMDSTAT_OFFSET; - port->altstatus_addr = - port->ctl_addr = base + K2_SATA_TF_CTL_OFFSET; - port->bmdma_addr = base + K2_SATA_DMA_CMD_OFFSET; - port->scr_addr = base + K2_SATA_SCR_STATUS_OFFSET; -} - - -static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int printed_version; - struct ata_probe_ent *probe_ent = NULL; - unsigned long base; - void __iomem *mmio_base; - int pci_dev_busy = 0; - int rc; - int i; - - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - - /* - * If this driver happens to only be useful on Apple's K2, then - * we should check that here as it has a normal Serverworks ID - */ - rc = pci_enable_device(pdev); - if (rc) - return rc; - /* - * Check if we have resources mapped at all (second function may - * have been disabled by firmware) - */ - if (pci_resource_len(pdev, 5) == 0) - return -ENODEV; - - /* Request PCI regions */ - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - pci_dev_busy = 1; - goto err_out; - } - - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); - if (probe_ent == NULL) { - rc = -ENOMEM; - goto err_out_regions; - } - - memset(probe_ent, 0, sizeof(*probe_ent)); - probe_ent->dev = pci_dev_to_dev(pdev); - INIT_LIST_HEAD(&probe_ent->node); - - mmio_base = pci_iomap(pdev, 5, 0); - if (mmio_base == NULL) { - rc = -ENOMEM; - goto err_out_free_ent; - } - base = (unsigned long) mmio_base; - - /* Clear a magic bit in SCR1 according to Darwin, those help - * some funky seagate drives (though so far, those were already - * set by the firmware on the machines I had access to) - */ - writel(readl(mmio_base + K2_SATA_SICR1_OFFSET) & ~0x00040000, - mmio_base + K2_SATA_SICR1_OFFSET); - - /* Clear SATA error & interrupts we don't use */ - writel(0xffffffff, mmio_base + K2_SATA_SCR_ERROR_OFFSET); - writel(0x0, mmio_base + K2_SATA_SIM_OFFSET); - - probe_ent->sht = &k2_sata_sht; - probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO; - probe_ent->port_ops = &k2_sata_ops; - probe_ent->n_ports = 4; - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = IRQF_SHARED; - probe_ent->mmio_base = mmio_base; - - /* We don't care much about the PIO/UDMA masks, but the core won't like us - * if we don't fill these - */ - probe_ent->pio_mask = 0x1f; - probe_ent->mwdma_mask = 0x7; - probe_ent->udma_mask = 0x7f; - - /* different controllers have different number of ports - currently 4 or 8 */ - /* All ports are on the same function. Multi-function device is no - * longer available. This should not be seen in any system. */ - for (i = 0; i < ent->driver_data; i++) - k2_sata_setup_port(&probe_ent->port[i], base + i * K2_SATA_PORT_OFFSET); - - pci_set_master(pdev); - - /* FIXME: check ata_device_add return value */ - ata_device_add(probe_ent); - kfree(probe_ent); - - return 0; - -err_out_free_ent: - kfree(probe_ent); -err_out_regions: - pci_release_regions(pdev); -err_out: - if (!pci_dev_busy) - pci_disable_device(pdev); - return rc; -} - -/* 0x240 is device ID for Apple K2 device - * 0x241 is device ID for Serverworks Frodo4 - * 0x242 is device ID for Serverworks Frodo8 - * 0x24a is device ID for BCM5785 (aka HT1000) HT southbridge integrated SATA - * controller - * */ -static const struct pci_device_id k2_sata_pci_tbl[] = { - { 0x1166, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, - { 0x1166, 0x0241, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, - { 0x1166, 0x0242, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, - { 0x1166, 0x024a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, - { 0x1166, 0x024b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, - { } -}; - - -static struct pci_driver k2_sata_pci_driver = { - .name = DRV_NAME, - .id_table = k2_sata_pci_tbl, - .probe = k2_sata_init_one, - .remove = ata_pci_remove_one, -}; - - -static int __init k2_sata_init(void) -{ - return pci_register_driver(&k2_sata_pci_driver); -} - - -static void __exit k2_sata_exit(void) -{ - pci_unregister_driver(&k2_sata_pci_driver); -} - - -MODULE_AUTHOR("Benjamin Herrenschmidt"); -MODULE_DESCRIPTION("low-level driver for K2 SATA controller"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, k2_sata_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -module_init(k2_sata_init); -module_exit(k2_sata_exit); diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c deleted file mode 100644 index 0da83cba5c1..00000000000 --- a/drivers/scsi/sata_sx4.c +++ /dev/null @@ -1,1502 +0,0 @@ -/* - * sata_sx4.c - Promise SATA - * - * Maintained by: Jeff Garzik - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * Copyright 2003-2004 Red Hat, Inc. - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Hardware documentation available under NDA. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "sata_promise.h" - -#define DRV_NAME "sata_sx4" -#define DRV_VERSION "0.9" - - -enum { - PDC_PRD_TBL = 0x44, /* Direct command DMA table addr */ - - PDC_PKT_SUBMIT = 0x40, /* Command packet pointer addr */ - PDC_HDMA_PKT_SUBMIT = 0x100, /* Host DMA packet pointer addr */ - PDC_INT_SEQMASK = 0x40, /* Mask of asserted SEQ INTs */ - PDC_HDMA_CTLSTAT = 0x12C, /* Host DMA control / status */ - - PDC_20621_SEQCTL = 0x400, - PDC_20621_SEQMASK = 0x480, - PDC_20621_GENERAL_CTL = 0x484, - PDC_20621_PAGE_SIZE = (32 * 1024), - - /* chosen, not constant, values; we design our own DIMM mem map */ - PDC_20621_DIMM_WINDOW = 0x0C, /* page# for 32K DIMM window */ - PDC_20621_DIMM_BASE = 0x00200000, - PDC_20621_DIMM_DATA = (64 * 1024), - PDC_DIMM_DATA_STEP = (256 * 1024), - PDC_DIMM_WINDOW_STEP = (8 * 1024), - PDC_DIMM_HOST_PRD = (6 * 1024), - PDC_DIMM_HOST_PKT = (128 * 0), - PDC_DIMM_HPKT_PRD = (128 * 1), - PDC_DIMM_ATA_PKT = (128 * 2), - PDC_DIMM_APKT_PRD = (128 * 3), - PDC_DIMM_HEADER_SZ = PDC_DIMM_APKT_PRD + 128, - PDC_PAGE_WINDOW = 0x40, - PDC_PAGE_DATA = PDC_PAGE_WINDOW + - (PDC_20621_DIMM_DATA / PDC_20621_PAGE_SIZE), - PDC_PAGE_SET = PDC_DIMM_DATA_STEP / PDC_20621_PAGE_SIZE, - - PDC_CHIP0_OFS = 0xC0000, /* offset of chip #0 */ - - PDC_20621_ERR_MASK = (1<<19) | (1<<20) | (1<<21) | (1<<22) | - (1<<23), - - board_20621 = 0, /* FastTrak S150 SX4 */ - - PDC_RESET = (1 << 11), /* HDMA reset */ - - PDC_MAX_HDMA = 32, - PDC_HDMA_Q_MASK = (PDC_MAX_HDMA - 1), - - PDC_DIMM0_SPD_DEV_ADDRESS = 0x50, - PDC_DIMM1_SPD_DEV_ADDRESS = 0x51, - PDC_MAX_DIMM_MODULE = 0x02, - PDC_I2C_CONTROL_OFFSET = 0x48, - PDC_I2C_ADDR_DATA_OFFSET = 0x4C, - PDC_DIMM0_CONTROL_OFFSET = 0x80, - PDC_DIMM1_CONTROL_OFFSET = 0x84, - PDC_SDRAM_CONTROL_OFFSET = 0x88, - PDC_I2C_WRITE = 0x00000000, - PDC_I2C_READ = 0x00000040, - PDC_I2C_START = 0x00000080, - PDC_I2C_MASK_INT = 0x00000020, - PDC_I2C_COMPLETE = 0x00010000, - PDC_I2C_NO_ACK = 0x00100000, - PDC_DIMM_SPD_SUBADDRESS_START = 0x00, - PDC_DIMM_SPD_SUBADDRESS_END = 0x7F, - PDC_DIMM_SPD_ROW_NUM = 3, - PDC_DIMM_SPD_COLUMN_NUM = 4, - PDC_DIMM_SPD_MODULE_ROW = 5, - PDC_DIMM_SPD_TYPE = 11, - PDC_DIMM_SPD_FRESH_RATE = 12, - PDC_DIMM_SPD_BANK_NUM = 17, - PDC_DIMM_SPD_CAS_LATENCY = 18, - PDC_DIMM_SPD_ATTRIBUTE = 21, - PDC_DIMM_SPD_ROW_PRE_CHARGE = 27, - PDC_DIMM_SPD_ROW_ACTIVE_DELAY = 28, - PDC_DIMM_SPD_RAS_CAS_DELAY = 29, - PDC_DIMM_SPD_ACTIVE_PRECHARGE = 30, - PDC_DIMM_SPD_SYSTEM_FREQ = 126, - PDC_CTL_STATUS = 0x08, - PDC_DIMM_WINDOW_CTLR = 0x0C, - PDC_TIME_CONTROL = 0x3C, - PDC_TIME_PERIOD = 0x40, - PDC_TIME_COUNTER = 0x44, - PDC_GENERAL_CTLR = 0x484, - PCI_PLL_INIT = 0x8A531824, - PCI_X_TCOUNT = 0xEE1E5CFF -}; - - -struct pdc_port_priv { - u8 dimm_buf[(ATA_PRD_SZ * ATA_MAX_PRD) + 512]; - u8 *pkt; - dma_addr_t pkt_dma; -}; - -struct pdc_host_priv { - void __iomem *dimm_mmio; - - unsigned int doing_hdma; - unsigned int hdma_prod; - unsigned int hdma_cons; - struct { - struct ata_queued_cmd *qc; - unsigned int seq; - unsigned long pkt_ofs; - } hdma[32]; -}; - - -static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_regs *regs); -static void pdc_eng_timeout(struct ata_port *ap); -static void pdc_20621_phy_reset (struct ata_port *ap); -static int pdc_port_start(struct ata_port *ap); -static void pdc_port_stop(struct ata_port *ap); -static void pdc20621_qc_prep(struct ata_queued_cmd *qc); -static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf); -static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf); -static void pdc20621_host_stop(struct ata_host_set *host_set); -static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe); -static int pdc20621_detect_dimm(struct ata_probe_ent *pe); -static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, - u32 device, u32 subaddr, u32 *pdata); -static int pdc20621_prog_dimm0(struct ata_probe_ent *pe); -static unsigned int pdc20621_prog_dimm_global(struct ata_probe_ent *pe); -#ifdef ATA_VERBOSE_DEBUG -static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, - void *psource, u32 offset, u32 size); -#endif -static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, - void *psource, u32 offset, u32 size); -static void pdc20621_irq_clear(struct ata_port *ap); -static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc); - - -static struct scsi_host_template pdc_sata_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, -}; - -static const struct ata_port_operations pdc_20621_ops = { - .port_disable = ata_port_disable, - .tf_load = pdc_tf_load_mmio, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = pdc_exec_command_mmio, - .dev_select = ata_std_dev_select, - .phy_reset = pdc_20621_phy_reset, - .qc_prep = pdc20621_qc_prep, - .qc_issue = pdc20621_qc_issue_prot, - .data_xfer = ata_mmio_data_xfer, - .eng_timeout = pdc_eng_timeout, - .irq_handler = pdc20621_interrupt, - .irq_clear = pdc20621_irq_clear, - .port_start = pdc_port_start, - .port_stop = pdc_port_stop, - .host_stop = pdc20621_host_stop, -}; - -static const struct ata_port_info pdc_port_info[] = { - /* board_20621 */ - { - .sht = &pdc_sata_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SRST | ATA_FLAG_MMIO | - ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 ; FIXME */ - .port_ops = &pdc_20621_ops, - }, - -}; - -static const struct pci_device_id pdc_sata_pci_tbl[] = { - { PCI_VENDOR_ID_PROMISE, 0x6622, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_20621 }, - { } /* terminate list */ -}; - - -static struct pci_driver pdc_sata_pci_driver = { - .name = DRV_NAME, - .id_table = pdc_sata_pci_tbl, - .probe = pdc_sata_init_one, - .remove = ata_pci_remove_one, -}; - - -static void pdc20621_host_stop(struct ata_host_set *host_set) -{ - struct pci_dev *pdev = to_pci_dev(host_set->dev); - struct pdc_host_priv *hpriv = host_set->private_data; - void __iomem *dimm_mmio = hpriv->dimm_mmio; - - pci_iounmap(pdev, dimm_mmio); - kfree(hpriv); - - pci_iounmap(pdev, host_set->mmio_base); -} - -static int pdc_port_start(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct pdc_port_priv *pp; - int rc; - - rc = ata_port_start(ap); - if (rc) - return rc; - - pp = kmalloc(sizeof(*pp), GFP_KERNEL); - if (!pp) { - rc = -ENOMEM; - goto err_out; - } - memset(pp, 0, sizeof(*pp)); - - pp->pkt = dma_alloc_coherent(dev, 128, &pp->pkt_dma, GFP_KERNEL); - if (!pp->pkt) { - rc = -ENOMEM; - goto err_out_kfree; - } - - ap->private_data = pp; - - return 0; - -err_out_kfree: - kfree(pp); -err_out: - ata_port_stop(ap); - return rc; -} - - -static void pdc_port_stop(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct pdc_port_priv *pp = ap->private_data; - - ap->private_data = NULL; - dma_free_coherent(dev, 128, pp->pkt, pp->pkt_dma); - kfree(pp); - ata_port_stop(ap); -} - - -static void pdc_20621_phy_reset (struct ata_port *ap) -{ - VPRINTK("ENTER\n"); - ap->cbl = ATA_CBL_SATA; - ata_port_probe(ap); - ata_bus_reset(ap); -} - -static inline void pdc20621_ata_sg(struct ata_taskfile *tf, u8 *buf, - unsigned int portno, - unsigned int total_len) -{ - u32 addr; - unsigned int dw = PDC_DIMM_APKT_PRD >> 2; - u32 *buf32 = (u32 *) buf; - - /* output ATA packet S/G table */ - addr = PDC_20621_DIMM_BASE + PDC_20621_DIMM_DATA + - (PDC_DIMM_DATA_STEP * portno); - VPRINTK("ATA sg addr 0x%x, %d\n", addr, addr); - buf32[dw] = cpu_to_le32(addr); - buf32[dw + 1] = cpu_to_le32(total_len | ATA_PRD_EOT); - - VPRINTK("ATA PSG @ %x == (0x%x, 0x%x)\n", - PDC_20621_DIMM_BASE + - (PDC_DIMM_WINDOW_STEP * portno) + - PDC_DIMM_APKT_PRD, - buf32[dw], buf32[dw + 1]); -} - -static inline void pdc20621_host_sg(struct ata_taskfile *tf, u8 *buf, - unsigned int portno, - unsigned int total_len) -{ - u32 addr; - unsigned int dw = PDC_DIMM_HPKT_PRD >> 2; - u32 *buf32 = (u32 *) buf; - - /* output Host DMA packet S/G table */ - addr = PDC_20621_DIMM_BASE + PDC_20621_DIMM_DATA + - (PDC_DIMM_DATA_STEP * portno); - - buf32[dw] = cpu_to_le32(addr); - buf32[dw + 1] = cpu_to_le32(total_len | ATA_PRD_EOT); - - VPRINTK("HOST PSG @ %x == (0x%x, 0x%x)\n", - PDC_20621_DIMM_BASE + - (PDC_DIMM_WINDOW_STEP * portno) + - PDC_DIMM_HPKT_PRD, - buf32[dw], buf32[dw + 1]); -} - -static inline unsigned int pdc20621_ata_pkt(struct ata_taskfile *tf, - unsigned int devno, u8 *buf, - unsigned int portno) -{ - unsigned int i, dw; - u32 *buf32 = (u32 *) buf; - u8 dev_reg; - - unsigned int dimm_sg = PDC_20621_DIMM_BASE + - (PDC_DIMM_WINDOW_STEP * portno) + - PDC_DIMM_APKT_PRD; - VPRINTK("ENTER, dimm_sg == 0x%x, %d\n", dimm_sg, dimm_sg); - - i = PDC_DIMM_ATA_PKT; - - /* - * Set up ATA packet - */ - if ((tf->protocol == ATA_PROT_DMA) && (!(tf->flags & ATA_TFLAG_WRITE))) - buf[i++] = PDC_PKT_READ; - else if (tf->protocol == ATA_PROT_NODATA) - buf[i++] = PDC_PKT_NODATA; - else - buf[i++] = 0; - buf[i++] = 0; /* reserved */ - buf[i++] = portno + 1; /* seq. id */ - buf[i++] = 0xff; /* delay seq. id */ - - /* dimm dma S/G, and next-pkt */ - dw = i >> 2; - if (tf->protocol == ATA_PROT_NODATA) - buf32[dw] = 0; - else - buf32[dw] = cpu_to_le32(dimm_sg); - buf32[dw + 1] = 0; - i += 8; - - if (devno == 0) - dev_reg = ATA_DEVICE_OBS; - else - dev_reg = ATA_DEVICE_OBS | ATA_DEV1; - - /* select device */ - buf[i++] = (1 << 5) | PDC_PKT_CLEAR_BSY | ATA_REG_DEVICE; - buf[i++] = dev_reg; - - /* device control register */ - buf[i++] = (1 << 5) | PDC_REG_DEVCTL; - buf[i++] = tf->ctl; - - return i; -} - -static inline void pdc20621_host_pkt(struct ata_taskfile *tf, u8 *buf, - unsigned int portno) -{ - unsigned int dw; - u32 tmp, *buf32 = (u32 *) buf; - - unsigned int host_sg = PDC_20621_DIMM_BASE + - (PDC_DIMM_WINDOW_STEP * portno) + - PDC_DIMM_HOST_PRD; - unsigned int dimm_sg = PDC_20621_DIMM_BASE + - (PDC_DIMM_WINDOW_STEP * portno) + - PDC_DIMM_HPKT_PRD; - VPRINTK("ENTER, dimm_sg == 0x%x, %d\n", dimm_sg, dimm_sg); - VPRINTK("host_sg == 0x%x, %d\n", host_sg, host_sg); - - dw = PDC_DIMM_HOST_PKT >> 2; - - /* - * Set up Host DMA packet - */ - if ((tf->protocol == ATA_PROT_DMA) && (!(tf->flags & ATA_TFLAG_WRITE))) - tmp = PDC_PKT_READ; - else - tmp = 0; - tmp |= ((portno + 1 + 4) << 16); /* seq. id */ - tmp |= (0xff << 24); /* delay seq. id */ - buf32[dw + 0] = cpu_to_le32(tmp); - buf32[dw + 1] = cpu_to_le32(host_sg); - buf32[dw + 2] = cpu_to_le32(dimm_sg); - buf32[dw + 3] = 0; - - VPRINTK("HOST PKT @ %x == (0x%x 0x%x 0x%x 0x%x)\n", - PDC_20621_DIMM_BASE + (PDC_DIMM_WINDOW_STEP * portno) + - PDC_DIMM_HOST_PKT, - buf32[dw + 0], - buf32[dw + 1], - buf32[dw + 2], - buf32[dw + 3]); -} - -static void pdc20621_dma_prep(struct ata_queued_cmd *qc) -{ - struct scatterlist *sg; - struct ata_port *ap = qc->ap; - struct pdc_port_priv *pp = ap->private_data; - void __iomem *mmio = ap->host_set->mmio_base; - struct pdc_host_priv *hpriv = ap->host_set->private_data; - void __iomem *dimm_mmio = hpriv->dimm_mmio; - unsigned int portno = ap->port_no; - unsigned int i, idx, total_len = 0, sgt_len; - u32 *buf = (u32 *) &pp->dimm_buf[PDC_DIMM_HEADER_SZ]; - - WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP)); - - VPRINTK("ata%u: ENTER\n", ap->id); - - /* hard-code chip #0 */ - mmio += PDC_CHIP0_OFS; - - /* - * Build S/G table - */ - idx = 0; - ata_for_each_sg(sg, qc) { - buf[idx++] = cpu_to_le32(sg_dma_address(sg)); - buf[idx++] = cpu_to_le32(sg_dma_len(sg)); - total_len += sg_dma_len(sg); - } - buf[idx - 1] |= cpu_to_le32(ATA_PRD_EOT); - sgt_len = idx * 4; - - /* - * Build ATA, host DMA packets - */ - pdc20621_host_sg(&qc->tf, &pp->dimm_buf[0], portno, total_len); - pdc20621_host_pkt(&qc->tf, &pp->dimm_buf[0], portno); - - pdc20621_ata_sg(&qc->tf, &pp->dimm_buf[0], portno, total_len); - i = pdc20621_ata_pkt(&qc->tf, qc->dev->devno, &pp->dimm_buf[0], portno); - - if (qc->tf.flags & ATA_TFLAG_LBA48) - i = pdc_prep_lba48(&qc->tf, &pp->dimm_buf[0], i); - else - i = pdc_prep_lba28(&qc->tf, &pp->dimm_buf[0], i); - - pdc_pkt_footer(&qc->tf, &pp->dimm_buf[0], i); - - /* copy three S/G tables and two packets to DIMM MMIO window */ - memcpy_toio(dimm_mmio + (portno * PDC_DIMM_WINDOW_STEP), - &pp->dimm_buf, PDC_DIMM_HEADER_SZ); - memcpy_toio(dimm_mmio + (portno * PDC_DIMM_WINDOW_STEP) + - PDC_DIMM_HOST_PRD, - &pp->dimm_buf[PDC_DIMM_HEADER_SZ], sgt_len); - - /* force host FIFO dump */ - writel(0x00000001, mmio + PDC_20621_GENERAL_CTL); - - readl(dimm_mmio); /* MMIO PCI posting flush */ - - VPRINTK("ata pkt buf ofs %u, prd size %u, mmio copied\n", i, sgt_len); -} - -static void pdc20621_nodata_prep(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct pdc_port_priv *pp = ap->private_data; - void __iomem *mmio = ap->host_set->mmio_base; - struct pdc_host_priv *hpriv = ap->host_set->private_data; - void __iomem *dimm_mmio = hpriv->dimm_mmio; - unsigned int portno = ap->port_no; - unsigned int i; - - VPRINTK("ata%u: ENTER\n", ap->id); - - /* hard-code chip #0 */ - mmio += PDC_CHIP0_OFS; - - i = pdc20621_ata_pkt(&qc->tf, qc->dev->devno, &pp->dimm_buf[0], portno); - - if (qc->tf.flags & ATA_TFLAG_LBA48) - i = pdc_prep_lba48(&qc->tf, &pp->dimm_buf[0], i); - else - i = pdc_prep_lba28(&qc->tf, &pp->dimm_buf[0], i); - - pdc_pkt_footer(&qc->tf, &pp->dimm_buf[0], i); - - /* copy three S/G tables and two packets to DIMM MMIO window */ - memcpy_toio(dimm_mmio + (portno * PDC_DIMM_WINDOW_STEP), - &pp->dimm_buf, PDC_DIMM_HEADER_SZ); - - /* force host FIFO dump */ - writel(0x00000001, mmio + PDC_20621_GENERAL_CTL); - - readl(dimm_mmio); /* MMIO PCI posting flush */ - - VPRINTK("ata pkt buf ofs %u, mmio copied\n", i); -} - -static void pdc20621_qc_prep(struct ata_queued_cmd *qc) -{ - switch (qc->tf.protocol) { - case ATA_PROT_DMA: - pdc20621_dma_prep(qc); - break; - case ATA_PROT_NODATA: - pdc20621_nodata_prep(qc); - break; - default: - break; - } -} - -static void __pdc20621_push_hdma(struct ata_queued_cmd *qc, - unsigned int seq, - u32 pkt_ofs) -{ - struct ata_port *ap = qc->ap; - struct ata_host_set *host_set = ap->host_set; - void __iomem *mmio = host_set->mmio_base; - - /* hard-code chip #0 */ - mmio += PDC_CHIP0_OFS; - - writel(0x00000001, mmio + PDC_20621_SEQCTL + (seq * 4)); - readl(mmio + PDC_20621_SEQCTL + (seq * 4)); /* flush */ - - writel(pkt_ofs, mmio + PDC_HDMA_PKT_SUBMIT); - readl(mmio + PDC_HDMA_PKT_SUBMIT); /* flush */ -} - -static void pdc20621_push_hdma(struct ata_queued_cmd *qc, - unsigned int seq, - u32 pkt_ofs) -{ - struct ata_port *ap = qc->ap; - struct pdc_host_priv *pp = ap->host_set->private_data; - unsigned int idx = pp->hdma_prod & PDC_HDMA_Q_MASK; - - if (!pp->doing_hdma) { - __pdc20621_push_hdma(qc, seq, pkt_ofs); - pp->doing_hdma = 1; - return; - } - - pp->hdma[idx].qc = qc; - pp->hdma[idx].seq = seq; - pp->hdma[idx].pkt_ofs = pkt_ofs; - pp->hdma_prod++; -} - -static void pdc20621_pop_hdma(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct pdc_host_priv *pp = ap->host_set->private_data; - unsigned int idx = pp->hdma_cons & PDC_HDMA_Q_MASK; - - /* if nothing on queue, we're done */ - if (pp->hdma_prod == pp->hdma_cons) { - pp->doing_hdma = 0; - return; - } - - __pdc20621_push_hdma(pp->hdma[idx].qc, pp->hdma[idx].seq, - pp->hdma[idx].pkt_ofs); - pp->hdma_cons++; -} - -#ifdef ATA_VERBOSE_DEBUG -static void pdc20621_dump_hdma(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int port_no = ap->port_no; - struct pdc_host_priv *hpriv = ap->host_set->private_data; - void *dimm_mmio = hpriv->dimm_mmio; - - dimm_mmio += (port_no * PDC_DIMM_WINDOW_STEP); - dimm_mmio += PDC_DIMM_HOST_PKT; - - printk(KERN_ERR "HDMA[0] == 0x%08X\n", readl(dimm_mmio)); - printk(KERN_ERR "HDMA[1] == 0x%08X\n", readl(dimm_mmio + 4)); - printk(KERN_ERR "HDMA[2] == 0x%08X\n", readl(dimm_mmio + 8)); - printk(KERN_ERR "HDMA[3] == 0x%08X\n", readl(dimm_mmio + 12)); -} -#else -static inline void pdc20621_dump_hdma(struct ata_queued_cmd *qc) { } -#endif /* ATA_VERBOSE_DEBUG */ - -static void pdc20621_packet_start(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct ata_host_set *host_set = ap->host_set; - unsigned int port_no = ap->port_no; - void __iomem *mmio = host_set->mmio_base; - unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); - u8 seq = (u8) (port_no + 1); - unsigned int port_ofs; - - /* hard-code chip #0 */ - mmio += PDC_CHIP0_OFS; - - VPRINTK("ata%u: ENTER\n", ap->id); - - wmb(); /* flush PRD, pkt writes */ - - port_ofs = PDC_20621_DIMM_BASE + (PDC_DIMM_WINDOW_STEP * port_no); - - /* if writing, we (1) DMA to DIMM, then (2) do ATA command */ - if (rw && qc->tf.protocol == ATA_PROT_DMA) { - seq += 4; - - pdc20621_dump_hdma(qc); - pdc20621_push_hdma(qc, seq, port_ofs + PDC_DIMM_HOST_PKT); - VPRINTK("queued ofs 0x%x (%u), seq %u\n", - port_ofs + PDC_DIMM_HOST_PKT, - port_ofs + PDC_DIMM_HOST_PKT, - seq); - } else { - writel(0x00000001, mmio + PDC_20621_SEQCTL + (seq * 4)); - readl(mmio + PDC_20621_SEQCTL + (seq * 4)); /* flush */ - - writel(port_ofs + PDC_DIMM_ATA_PKT, - (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); - readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); - VPRINTK("submitted ofs 0x%x (%u), seq %u\n", - port_ofs + PDC_DIMM_ATA_PKT, - port_ofs + PDC_DIMM_ATA_PKT, - seq); - } -} - -static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc) -{ - switch (qc->tf.protocol) { - case ATA_PROT_DMA: - case ATA_PROT_NODATA: - pdc20621_packet_start(qc); - return 0; - - case ATA_PROT_ATAPI_DMA: - BUG(); - break; - - default: - break; - } - - return ata_qc_issue_prot(qc); -} - -static inline unsigned int pdc20621_host_intr( struct ata_port *ap, - struct ata_queued_cmd *qc, - unsigned int doing_hdma, - void __iomem *mmio) -{ - unsigned int port_no = ap->port_no; - unsigned int port_ofs = - PDC_20621_DIMM_BASE + (PDC_DIMM_WINDOW_STEP * port_no); - u8 status; - unsigned int handled = 0; - - VPRINTK("ENTER\n"); - - if ((qc->tf.protocol == ATA_PROT_DMA) && /* read */ - (!(qc->tf.flags & ATA_TFLAG_WRITE))) { - - /* step two - DMA from DIMM to host */ - if (doing_hdma) { - VPRINTK("ata%u: read hdma, 0x%x 0x%x\n", ap->id, - readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT)); - /* get drive status; clear intr; complete txn */ - qc->err_mask |= ac_err_mask(ata_wait_idle(ap)); - ata_qc_complete(qc); - pdc20621_pop_hdma(qc); - } - - /* step one - exec ATA command */ - else { - u8 seq = (u8) (port_no + 1 + 4); - VPRINTK("ata%u: read ata, 0x%x 0x%x\n", ap->id, - readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT)); - - /* submit hdma pkt */ - pdc20621_dump_hdma(qc); - pdc20621_push_hdma(qc, seq, - port_ofs + PDC_DIMM_HOST_PKT); - } - handled = 1; - - } else if (qc->tf.protocol == ATA_PROT_DMA) { /* write */ - - /* step one - DMA from host to DIMM */ - if (doing_hdma) { - u8 seq = (u8) (port_no + 1); - VPRINTK("ata%u: write hdma, 0x%x 0x%x\n", ap->id, - readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT)); - - /* submit ata pkt */ - writel(0x00000001, mmio + PDC_20621_SEQCTL + (seq * 4)); - readl(mmio + PDC_20621_SEQCTL + (seq * 4)); - writel(port_ofs + PDC_DIMM_ATA_PKT, - (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); - readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); - } - - /* step two - execute ATA command */ - else { - VPRINTK("ata%u: write ata, 0x%x 0x%x\n", ap->id, - readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT)); - /* get drive status; clear intr; complete txn */ - qc->err_mask |= ac_err_mask(ata_wait_idle(ap)); - ata_qc_complete(qc); - pdc20621_pop_hdma(qc); - } - handled = 1; - - /* command completion, but no data xfer */ - } else if (qc->tf.protocol == ATA_PROT_NODATA) { - - status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); - DPRINTK("BUS_NODATA (drv_stat 0x%X)\n", status); - qc->err_mask |= ac_err_mask(status); - ata_qc_complete(qc); - handled = 1; - - } else { - ap->stats.idle_irq++; - } - - return handled; -} - -static void pdc20621_irq_clear(struct ata_port *ap) -{ - struct ata_host_set *host_set = ap->host_set; - void __iomem *mmio = host_set->mmio_base; - - mmio += PDC_CHIP0_OFS; - - readl(mmio + PDC_20621_SEQMASK); -} - -static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - struct ata_port *ap; - u32 mask = 0; - unsigned int i, tmp, port_no; - unsigned int handled = 0; - void __iomem *mmio_base; - - VPRINTK("ENTER\n"); - - if (!host_set || !host_set->mmio_base) { - VPRINTK("QUICK EXIT\n"); - return IRQ_NONE; - } - - mmio_base = host_set->mmio_base; - - /* reading should also clear interrupts */ - mmio_base += PDC_CHIP0_OFS; - mask = readl(mmio_base + PDC_20621_SEQMASK); - VPRINTK("mask == 0x%x\n", mask); - - if (mask == 0xffffffff) { - VPRINTK("QUICK EXIT 2\n"); - return IRQ_NONE; - } - mask &= 0xffff; /* only 16 tags possible */ - if (!mask) { - VPRINTK("QUICK EXIT 3\n"); - return IRQ_NONE; - } - - spin_lock(&host_set->lock); - - for (i = 1; i < 9; i++) { - port_no = i - 1; - if (port_no > 3) - port_no -= 4; - if (port_no >= host_set->n_ports) - ap = NULL; - else - ap = host_set->ports[port_no]; - tmp = mask & (1 << i); - VPRINTK("seq %u, port_no %u, ap %p, tmp %x\n", i, port_no, ap, tmp); - if (tmp && ap && - !(ap->flags & ATA_FLAG_DISABLED)) { - struct ata_queued_cmd *qc; - - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) - handled += pdc20621_host_intr(ap, qc, (i > 4), - mmio_base); - } - } - - spin_unlock(&host_set->lock); - - VPRINTK("mask == 0x%x\n", mask); - - VPRINTK("EXIT\n"); - - return IRQ_RETVAL(handled); -} - -static void pdc_eng_timeout(struct ata_port *ap) -{ - u8 drv_stat; - struct ata_host_set *host_set = ap->host_set; - struct ata_queued_cmd *qc; - unsigned long flags; - - DPRINTK("ENTER\n"); - - spin_lock_irqsave(&host_set->lock, flags); - - qc = ata_qc_from_tag(ap, ap->active_tag); - - switch (qc->tf.protocol) { - case ATA_PROT_DMA: - case ATA_PROT_NODATA: - ata_port_printk(ap, KERN_ERR, "command timeout\n"); - qc->err_mask |= __ac_err_mask(ata_wait_idle(ap)); - break; - - default: - drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); - - ata_port_printk(ap, KERN_ERR, - "unknown timeout, cmd 0x%x stat 0x%x\n", - qc->tf.command, drv_stat); - - qc->err_mask |= ac_err_mask(drv_stat); - break; - } - - spin_unlock_irqrestore(&host_set->lock, flags); - ata_eh_qc_complete(qc); - DPRINTK("EXIT\n"); -} - -static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - WARN_ON (tf->protocol == ATA_PROT_DMA || - tf->protocol == ATA_PROT_NODATA); - ata_tf_load(ap, tf); -} - - -static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - WARN_ON (tf->protocol == ATA_PROT_DMA || - tf->protocol == ATA_PROT_NODATA); - ata_exec_command(ap, tf); -} - - -static void pdc_sata_setup_port(struct ata_ioports *port, unsigned long base) -{ - port->cmd_addr = base; - port->data_addr = base; - port->feature_addr = - port->error_addr = base + 0x4; - port->nsect_addr = base + 0x8; - port->lbal_addr = base + 0xc; - port->lbam_addr = base + 0x10; - port->lbah_addr = base + 0x14; - port->device_addr = base + 0x18; - port->command_addr = - port->status_addr = base + 0x1c; - port->altstatus_addr = - port->ctl_addr = base + 0x38; -} - - -#ifdef ATA_VERBOSE_DEBUG -static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, void *psource, - u32 offset, u32 size) -{ - u32 window_size; - u16 idx; - u8 page_mask; - long dist; - void __iomem *mmio = pe->mmio_base; - struct pdc_host_priv *hpriv = pe->private_data; - void __iomem *dimm_mmio = hpriv->dimm_mmio; - - /* hard-code chip #0 */ - mmio += PDC_CHIP0_OFS; - - page_mask = 0x00; - window_size = 0x2000 * 4; /* 32K byte uchar size */ - idx = (u16) (offset / window_size); - - writel(0x01, mmio + PDC_GENERAL_CTLR); - readl(mmio + PDC_GENERAL_CTLR); - writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); - readl(mmio + PDC_DIMM_WINDOW_CTLR); - - offset -= (idx * window_size); - idx++; - dist = ((long) (window_size - (offset + size))) >= 0 ? size : - (long) (window_size - offset); - memcpy_fromio((char *) psource, (char *) (dimm_mmio + offset / 4), - dist); - - psource += dist; - size -= dist; - for (; (long) size >= (long) window_size ;) { - writel(0x01, mmio + PDC_GENERAL_CTLR); - readl(mmio + PDC_GENERAL_CTLR); - writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); - readl(mmio + PDC_DIMM_WINDOW_CTLR); - memcpy_fromio((char *) psource, (char *) (dimm_mmio), - window_size / 4); - psource += window_size; - size -= window_size; - idx ++; - } - - if (size) { - writel(0x01, mmio + PDC_GENERAL_CTLR); - readl(mmio + PDC_GENERAL_CTLR); - writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); - readl(mmio + PDC_DIMM_WINDOW_CTLR); - memcpy_fromio((char *) psource, (char *) (dimm_mmio), - size / 4); - } -} -#endif - - -static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, - u32 offset, u32 size) -{ - u32 window_size; - u16 idx; - u8 page_mask; - long dist; - void __iomem *mmio = pe->mmio_base; - struct pdc_host_priv *hpriv = pe->private_data; - void __iomem *dimm_mmio = hpriv->dimm_mmio; - - /* hard-code chip #0 */ - mmio += PDC_CHIP0_OFS; - - page_mask = 0x00; - window_size = 0x2000 * 4; /* 32K byte uchar size */ - idx = (u16) (offset / window_size); - - writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); - readl(mmio + PDC_DIMM_WINDOW_CTLR); - offset -= (idx * window_size); - idx++; - dist = ((long)(s32)(window_size - (offset + size))) >= 0 ? size : - (long) (window_size - offset); - memcpy_toio(dimm_mmio + offset / 4, psource, dist); - writel(0x01, mmio + PDC_GENERAL_CTLR); - readl(mmio + PDC_GENERAL_CTLR); - - psource += dist; - size -= dist; - for (; (long) size >= (long) window_size ;) { - writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); - readl(mmio + PDC_DIMM_WINDOW_CTLR); - memcpy_toio(dimm_mmio, psource, window_size / 4); - writel(0x01, mmio + PDC_GENERAL_CTLR); - readl(mmio + PDC_GENERAL_CTLR); - psource += window_size; - size -= window_size; - idx ++; - } - - if (size) { - writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); - readl(mmio + PDC_DIMM_WINDOW_CTLR); - memcpy_toio(dimm_mmio, psource, size / 4); - writel(0x01, mmio + PDC_GENERAL_CTLR); - readl(mmio + PDC_GENERAL_CTLR); - } -} - - -static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, u32 device, - u32 subaddr, u32 *pdata) -{ - void __iomem *mmio = pe->mmio_base; - u32 i2creg = 0; - u32 status; - u32 count =0; - - /* hard-code chip #0 */ - mmio += PDC_CHIP0_OFS; - - i2creg |= device << 24; - i2creg |= subaddr << 16; - - /* Set the device and subaddress */ - writel(i2creg, mmio + PDC_I2C_ADDR_DATA_OFFSET); - readl(mmio + PDC_I2C_ADDR_DATA_OFFSET); - - /* Write Control to perform read operation, mask int */ - writel(PDC_I2C_READ | PDC_I2C_START | PDC_I2C_MASK_INT, - mmio + PDC_I2C_CONTROL_OFFSET); - - for (count = 0; count <= 1000; count ++) { - status = readl(mmio + PDC_I2C_CONTROL_OFFSET); - if (status & PDC_I2C_COMPLETE) { - status = readl(mmio + PDC_I2C_ADDR_DATA_OFFSET); - break; - } else if (count == 1000) - return 0; - } - - *pdata = (status >> 8) & 0x000000ff; - return 1; -} - - -static int pdc20621_detect_dimm(struct ata_probe_ent *pe) -{ - u32 data=0 ; - if (pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, - PDC_DIMM_SPD_SYSTEM_FREQ, &data)) { - if (data == 100) - return 100; - } else - return 0; - - if (pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, 9, &data)) { - if(data <= 0x75) - return 133; - } else - return 0; - - return 0; -} - - -static int pdc20621_prog_dimm0(struct ata_probe_ent *pe) -{ - u32 spd0[50]; - u32 data = 0; - int size, i; - u8 bdimmsize; - void __iomem *mmio = pe->mmio_base; - static const struct { - unsigned int reg; - unsigned int ofs; - } pdc_i2c_read_data [] = { - { PDC_DIMM_SPD_TYPE, 11 }, - { PDC_DIMM_SPD_FRESH_RATE, 12 }, - { PDC_DIMM_SPD_COLUMN_NUM, 4 }, - { PDC_DIMM_SPD_ATTRIBUTE, 21 }, - { PDC_DIMM_SPD_ROW_NUM, 3 }, - { PDC_DIMM_SPD_BANK_NUM, 17 }, - { PDC_DIMM_SPD_MODULE_ROW, 5 }, - { PDC_DIMM_SPD_ROW_PRE_CHARGE, 27 }, - { PDC_DIMM_SPD_ROW_ACTIVE_DELAY, 28 }, - { PDC_DIMM_SPD_RAS_CAS_DELAY, 29 }, - { PDC_DIMM_SPD_ACTIVE_PRECHARGE, 30 }, - { PDC_DIMM_SPD_CAS_LATENCY, 18 }, - }; - - /* hard-code chip #0 */ - mmio += PDC_CHIP0_OFS; - - for(i=0; i spd0[28]) - ? spd0[29] : spd0[28]) + 9) / 10) - 1) << 10; - data |= ((spd0[30] - spd0[29] + 9) / 10 - 2) << 12; - - if (spd0[18] & 0x08) - data |= ((0x03) << 14); - else if (spd0[18] & 0x04) - data |= ((0x02) << 14); - else if (spd0[18] & 0x01) - data |= ((0x01) << 14); - else - data |= (0 << 14); - - /* - Calculate the size of bDIMMSize (power of 2) and - merge the DIMM size by program start/end address. - */ - - bdimmsize = spd0[4] + (spd0[5] / 2) + spd0[3] + (spd0[17] / 2) + 3; - size = (1 << bdimmsize) >> 20; /* size = xxx(MB) */ - data |= (((size / 16) - 1) << 16); - data |= (0 << 23); - data |= 8; - writel(data, mmio + PDC_DIMM0_CONTROL_OFFSET); - readl(mmio + PDC_DIMM0_CONTROL_OFFSET); - return size; -} - - -static unsigned int pdc20621_prog_dimm_global(struct ata_probe_ent *pe) -{ - u32 data, spd0; - int error, i; - void __iomem *mmio = pe->mmio_base; - - /* hard-code chip #0 */ - mmio += PDC_CHIP0_OFS; - - /* - Set To Default : DIMM Module Global Control Register (0x022259F1) - DIMM Arbitration Disable (bit 20) - DIMM Data/Control Output Driving Selection (bit12 - bit15) - Refresh Enable (bit 17) - */ - - data = 0x022259F1; - writel(data, mmio + PDC_SDRAM_CONTROL_OFFSET); - readl(mmio + PDC_SDRAM_CONTROL_OFFSET); - - /* Turn on for ECC */ - pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, - PDC_DIMM_SPD_TYPE, &spd0); - if (spd0 == 0x02) { - data |= (0x01 << 16); - writel(data, mmio + PDC_SDRAM_CONTROL_OFFSET); - readl(mmio + PDC_SDRAM_CONTROL_OFFSET); - printk(KERN_ERR "Local DIMM ECC Enabled\n"); - } - - /* DIMM Initialization Select/Enable (bit 18/19) */ - data &= (~(1<<18)); - data |= (1<<19); - writel(data, mmio + PDC_SDRAM_CONTROL_OFFSET); - - error = 1; - for (i = 1; i <= 10; i++) { /* polling ~5 secs */ - data = readl(mmio + PDC_SDRAM_CONTROL_OFFSET); - if (!(data & (1<<19))) { - error = 0; - break; - } - msleep(i*100); - } - return error; -} - - -static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe) -{ - int speed, size, length; - u32 addr,spd0,pci_status; - u32 tmp=0; - u32 time_period=0; - u32 tcount=0; - u32 ticks=0; - u32 clock=0; - u32 fparam=0; - void __iomem *mmio = pe->mmio_base; - - /* hard-code chip #0 */ - mmio += PDC_CHIP0_OFS; - - /* Initialize PLL based upon PCI Bus Frequency */ - - /* Initialize Time Period Register */ - writel(0xffffffff, mmio + PDC_TIME_PERIOD); - time_period = readl(mmio + PDC_TIME_PERIOD); - VPRINTK("Time Period Register (0x40): 0x%x\n", time_period); - - /* Enable timer */ - writel(0x00001a0, mmio + PDC_TIME_CONTROL); - readl(mmio + PDC_TIME_CONTROL); - - /* Wait 3 seconds */ - msleep(3000); - - /* - When timer is enabled, counter is decreased every internal - clock cycle. - */ - - tcount = readl(mmio + PDC_TIME_COUNTER); - VPRINTK("Time Counter Register (0x44): 0x%x\n", tcount); - - /* - If SX4 is on PCI-X bus, after 3 seconds, the timer counter - register should be >= (0xffffffff - 3x10^8). - */ - if(tcount >= PCI_X_TCOUNT) { - ticks = (time_period - tcount); - VPRINTK("Num counters 0x%x (%d)\n", ticks, ticks); - - clock = (ticks / 300000); - VPRINTK("10 * Internal clk = 0x%x (%d)\n", clock, clock); - - clock = (clock * 33); - VPRINTK("10 * Internal clk * 33 = 0x%x (%d)\n", clock, clock); - - /* PLL F Param (bit 22:16) */ - fparam = (1400000 / clock) - 2; - VPRINTK("PLL F Param: 0x%x (%d)\n", fparam, fparam); - - /* OD param = 0x2 (bit 31:30), R param = 0x5 (bit 29:25) */ - pci_status = (0x8a001824 | (fparam << 16)); - } else - pci_status = PCI_PLL_INIT; - - /* Initialize PLL. */ - VPRINTK("pci_status: 0x%x\n", pci_status); - writel(pci_status, mmio + PDC_CTL_STATUS); - readl(mmio + PDC_CTL_STATUS); - - /* - Read SPD of DIMM by I2C interface, - and program the DIMM Module Controller. - */ - if (!(speed = pdc20621_detect_dimm(pe))) { - printk(KERN_ERR "Detect Local DIMM Fail\n"); - return 1; /* DIMM error */ - } - VPRINTK("Local DIMM Speed = %d\n", speed); - - /* Programming DIMM0 Module Control Register (index_CID0:80h) */ - size = pdc20621_prog_dimm0(pe); - VPRINTK("Local DIMM Size = %dMB\n",size); - - /* Programming DIMM Module Global Control Register (index_CID0:88h) */ - if (pdc20621_prog_dimm_global(pe)) { - printk(KERN_ERR "Programming DIMM Module Global Control Register Fail\n"); - return 1; - } - -#ifdef ATA_VERBOSE_DEBUG - { - u8 test_parttern1[40] = {0x55,0xAA,'P','r','o','m','i','s','e',' ', - 'N','o','t',' ','Y','e','t',' ','D','e','f','i','n','e','d',' ', - '1','.','1','0', - '9','8','0','3','1','6','1','2',0,0}; - u8 test_parttern2[40] = {0}; - - pdc20621_put_to_dimm(pe, (void *) test_parttern2, 0x10040, 40); - pdc20621_put_to_dimm(pe, (void *) test_parttern2, 0x40, 40); - - pdc20621_put_to_dimm(pe, (void *) test_parttern1, 0x10040, 40); - pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x40, 40); - printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], - test_parttern2[1], &(test_parttern2[2])); - pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x10040, - 40); - printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], - test_parttern2[1], &(test_parttern2[2])); - - pdc20621_put_to_dimm(pe, (void *) test_parttern1, 0x40, 40); - pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x40, 40); - printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], - test_parttern2[1], &(test_parttern2[2])); - } -#endif - - /* ECC initiliazation. */ - - pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, - PDC_DIMM_SPD_TYPE, &spd0); - if (spd0 == 0x02) { - VPRINTK("Start ECC initialization\n"); - addr = 0; - length = size * 1024 * 1024; - while (addr < length) { - pdc20621_put_to_dimm(pe, (void *) &tmp, addr, - sizeof(u32)); - addr += sizeof(u32); - } - VPRINTK("Finish ECC initialization\n"); - } - return 0; -} - - -static void pdc_20621_init(struct ata_probe_ent *pe) -{ - u32 tmp; - void __iomem *mmio = pe->mmio_base; - - /* hard-code chip #0 */ - mmio += PDC_CHIP0_OFS; - - /* - * Select page 0x40 for our 32k DIMM window - */ - tmp = readl(mmio + PDC_20621_DIMM_WINDOW) & 0xffff0000; - tmp |= PDC_PAGE_WINDOW; /* page 40h; arbitrarily selected */ - writel(tmp, mmio + PDC_20621_DIMM_WINDOW); - - /* - * Reset Host DMA - */ - tmp = readl(mmio + PDC_HDMA_CTLSTAT); - tmp |= PDC_RESET; - writel(tmp, mmio + PDC_HDMA_CTLSTAT); - readl(mmio + PDC_HDMA_CTLSTAT); /* flush */ - - udelay(10); - - tmp = readl(mmio + PDC_HDMA_CTLSTAT); - tmp &= ~PDC_RESET; - writel(tmp, mmio + PDC_HDMA_CTLSTAT); - readl(mmio + PDC_HDMA_CTLSTAT); /* flush */ -} - -static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int printed_version; - struct ata_probe_ent *probe_ent = NULL; - unsigned long base; - void __iomem *mmio_base; - void __iomem *dimm_mmio = NULL; - struct pdc_host_priv *hpriv = NULL; - unsigned int board_idx = (unsigned int) ent->driver_data; - int pci_dev_busy = 0; - int rc; - - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - pci_dev_busy = 1; - goto err_out; - } - - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); - if (probe_ent == NULL) { - rc = -ENOMEM; - goto err_out_regions; - } - - memset(probe_ent, 0, sizeof(*probe_ent)); - probe_ent->dev = pci_dev_to_dev(pdev); - INIT_LIST_HEAD(&probe_ent->node); - - mmio_base = pci_iomap(pdev, 3, 0); - if (mmio_base == NULL) { - rc = -ENOMEM; - goto err_out_free_ent; - } - base = (unsigned long) mmio_base; - - hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL); - if (!hpriv) { - rc = -ENOMEM; - goto err_out_iounmap; - } - memset(hpriv, 0, sizeof(*hpriv)); - - dimm_mmio = pci_iomap(pdev, 4, 0); - if (!dimm_mmio) { - kfree(hpriv); - rc = -ENOMEM; - goto err_out_iounmap; - } - - hpriv->dimm_mmio = dimm_mmio; - - probe_ent->sht = pdc_port_info[board_idx].sht; - probe_ent->host_flags = pdc_port_info[board_idx].host_flags; - probe_ent->pio_mask = pdc_port_info[board_idx].pio_mask; - probe_ent->mwdma_mask = pdc_port_info[board_idx].mwdma_mask; - probe_ent->udma_mask = pdc_port_info[board_idx].udma_mask; - probe_ent->port_ops = pdc_port_info[board_idx].port_ops; - - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = IRQF_SHARED; - probe_ent->mmio_base = mmio_base; - - probe_ent->private_data = hpriv; - base += PDC_CHIP0_OFS; - - probe_ent->n_ports = 4; - pdc_sata_setup_port(&probe_ent->port[0], base + 0x200); - pdc_sata_setup_port(&probe_ent->port[1], base + 0x280); - pdc_sata_setup_port(&probe_ent->port[2], base + 0x300); - pdc_sata_setup_port(&probe_ent->port[3], base + 0x380); - - pci_set_master(pdev); - - /* initialize adapter */ - /* initialize local dimm */ - if (pdc20621_dimm_init(probe_ent)) { - rc = -ENOMEM; - goto err_out_iounmap_dimm; - } - pdc_20621_init(probe_ent); - - /* FIXME: check ata_device_add return value */ - ata_device_add(probe_ent); - kfree(probe_ent); - - return 0; - -err_out_iounmap_dimm: /* only get to this label if 20621 */ - kfree(hpriv); - pci_iounmap(pdev, dimm_mmio); -err_out_iounmap: - pci_iounmap(pdev, mmio_base); -err_out_free_ent: - kfree(probe_ent); -err_out_regions: - pci_release_regions(pdev); -err_out: - if (!pci_dev_busy) - pci_disable_device(pdev); - return rc; -} - - -static int __init pdc_sata_init(void) -{ - return pci_register_driver(&pdc_sata_pci_driver); -} - - -static void __exit pdc_sata_exit(void) -{ - pci_unregister_driver(&pdc_sata_pci_driver); -} - - -MODULE_AUTHOR("Jeff Garzik"); -MODULE_DESCRIPTION("Promise SATA low-level driver"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, pdc_sata_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -module_init(pdc_sata_init); -module_exit(pdc_sata_exit); diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c deleted file mode 100644 index 654aae2b25c..00000000000 --- a/drivers/scsi/sata_uli.c +++ /dev/null @@ -1,300 +0,0 @@ -/* - * sata_uli.c - ULi Electronics SATA - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Hardware documentation available under NDA. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "sata_uli" -#define DRV_VERSION "1.0" - -enum { - uli_5289 = 0, - uli_5287 = 1, - uli_5281 = 2, - - uli_max_ports = 4, - - /* PCI configuration registers */ - ULI5287_BASE = 0x90, /* sata0 phy SCR registers */ - ULI5287_OFFS = 0x10, /* offset from sata0->sata1 phy regs */ - ULI5281_BASE = 0x60, /* sata0 phy SCR registers */ - ULI5281_OFFS = 0x60, /* offset from sata0->sata1 phy regs */ -}; - -struct uli_priv { - unsigned int scr_cfg_addr[uli_max_ports]; -}; - -static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static u32 uli_scr_read (struct ata_port *ap, unsigned int sc_reg); -static void uli_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); - -static const struct pci_device_id uli_pci_tbl[] = { - { PCI_VENDOR_ID_AL, 0x5289, PCI_ANY_ID, PCI_ANY_ID, 0, 0, uli_5289 }, - { PCI_VENDOR_ID_AL, 0x5287, PCI_ANY_ID, PCI_ANY_ID, 0, 0, uli_5287 }, - { PCI_VENDOR_ID_AL, 0x5281, PCI_ANY_ID, PCI_ANY_ID, 0, 0, uli_5281 }, - { } /* terminate list */ -}; - - -static struct pci_driver uli_pci_driver = { - .name = DRV_NAME, - .id_table = uli_pci_tbl, - .probe = uli_init_one, - .remove = ata_pci_remove_one, -}; - -static struct scsi_host_template uli_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, -}; - -static const struct ata_port_operations uli_ops = { - .port_disable = ata_port_disable, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, - - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = ata_bmdma_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - - .scr_read = uli_scr_read, - .scr_write = uli_scr_write, - - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop, -}; - -static struct ata_port_info uli_port_info = { - .sht = &uli_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &uli_ops, -}; - - -MODULE_AUTHOR("Peer Chen"); -MODULE_DESCRIPTION("low-level driver for ULi Electronics SATA controller"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, uli_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg) -{ - struct uli_priv *hpriv = ap->host_set->private_data; - return hpriv->scr_cfg_addr[ap->port_no] + (4 * sc_reg); -} - -static u32 uli_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg) -{ - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - unsigned int cfg_addr = get_scr_cfg_addr(ap, sc_reg); - u32 val; - - pci_read_config_dword(pdev, cfg_addr, &val); - return val; -} - -static void uli_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val) -{ - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - unsigned int cfg_addr = get_scr_cfg_addr(ap, scr); - - pci_write_config_dword(pdev, cfg_addr, val); -} - -static u32 uli_scr_read (struct ata_port *ap, unsigned int sc_reg) -{ - if (sc_reg > SCR_CONTROL) - return 0xffffffffU; - - return uli_scr_cfg_read(ap, sc_reg); -} - -static void uli_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) -{ - if (sc_reg > SCR_CONTROL) //SCR_CONTROL=2, SCR_ERROR=1, SCR_STATUS=0 - return; - - uli_scr_cfg_write(ap, sc_reg, val); -} - -static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int printed_version; - struct ata_probe_ent *probe_ent; - struct ata_port_info *ppi; - int rc; - unsigned int board_idx = (unsigned int) ent->driver_data; - int pci_dev_busy = 0; - struct uli_priv *hpriv; - - if (!printed_version++) - dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - pci_dev_busy = 1; - goto err_out; - } - - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - - ppi = &uli_port_info; - probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); - if (!probe_ent) { - rc = -ENOMEM; - goto err_out_regions; - } - - hpriv = kzalloc(sizeof(*hpriv), GFP_KERNEL); - if (!hpriv) { - rc = -ENOMEM; - goto err_out_probe_ent; - } - - probe_ent->private_data = hpriv; - - switch (board_idx) { - case uli_5287: - hpriv->scr_cfg_addr[0] = ULI5287_BASE; - hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS; - probe_ent->n_ports = 4; - - probe_ent->port[2].cmd_addr = pci_resource_start(pdev, 0) + 8; - probe_ent->port[2].altstatus_addr = - probe_ent->port[2].ctl_addr = - (pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS) + 4; - probe_ent->port[2].bmdma_addr = pci_resource_start(pdev, 4) + 16; - hpriv->scr_cfg_addr[2] = ULI5287_BASE + ULI5287_OFFS*4; - - probe_ent->port[3].cmd_addr = pci_resource_start(pdev, 2) + 8; - probe_ent->port[3].altstatus_addr = - probe_ent->port[3].ctl_addr = - (pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS) + 4; - probe_ent->port[3].bmdma_addr = pci_resource_start(pdev, 4) + 24; - hpriv->scr_cfg_addr[3] = ULI5287_BASE + ULI5287_OFFS*5; - - ata_std_ports(&probe_ent->port[2]); - ata_std_ports(&probe_ent->port[3]); - break; - - case uli_5289: - hpriv->scr_cfg_addr[0] = ULI5287_BASE; - hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS; - break; - - case uli_5281: - hpriv->scr_cfg_addr[0] = ULI5281_BASE; - hpriv->scr_cfg_addr[1] = ULI5281_BASE + ULI5281_OFFS; - break; - - default: - BUG(); - break; - } - - pci_set_master(pdev); - pci_intx(pdev, 1); - - /* FIXME: check ata_device_add return value */ - ata_device_add(probe_ent); - kfree(probe_ent); - - return 0; - -err_out_probe_ent: - kfree(probe_ent); -err_out_regions: - pci_release_regions(pdev); -err_out: - if (!pci_dev_busy) - pci_disable_device(pdev); - return rc; - -} - -static int __init uli_init(void) -{ - return pci_register_driver(&uli_pci_driver); -} - -static void __exit uli_exit(void) -{ - pci_unregister_driver(&uli_pci_driver); -} - - -module_init(uli_init); -module_exit(uli_exit); diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c deleted file mode 100644 index 0bf1dbea640..00000000000 --- a/drivers/scsi/sata_via.c +++ /dev/null @@ -1,394 +0,0 @@ -/* - * sata_via.c - VIA Serial ATA controllers - * - * Maintained by: Jeff Garzik - * Please ALWAYS copy linux-ide@vger.kernel.org - on emails. - * - * Copyright 2003-2004 Red Hat, Inc. All rights reserved. - * Copyright 2003-2004 Jeff Garzik - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Hardware documentation available under NDA. - * - * - * To-do list: - * - VT6421 PATA support - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "sata_via" -#define DRV_VERSION "2.0" - -enum board_ids_enum { - vt6420, - vt6421, -}; - -enum { - SATA_CHAN_ENAB = 0x40, /* SATA channel enable */ - SATA_INT_GATE = 0x41, /* SATA interrupt gating */ - SATA_NATIVE_MODE = 0x42, /* Native mode enable */ - SATA_PATA_SHARING = 0x49, /* PATA/SATA sharing func ctrl */ - - PORT0 = (1 << 1), - PORT1 = (1 << 0), - ALL_PORTS = PORT0 | PORT1, - N_PORTS = 2, - - NATIVE_MODE_ALL = (1 << 7) | (1 << 6) | (1 << 5) | (1 << 4), - - SATA_EXT_PHY = (1 << 6), /* 0==use PATA, 1==ext phy */ - SATA_2DEV = (1 << 5), /* SATA is master/slave */ -}; - -static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg); -static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); - -static const struct pci_device_id svia_pci_tbl[] = { - { 0x1106, 0x3149, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6420 }, - { 0x1106, 0x3249, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6421 }, - - { } /* terminate list */ -}; - -static struct pci_driver svia_pci_driver = { - .name = DRV_NAME, - .id_table = svia_pci_tbl, - .probe = svia_init_one, - .remove = ata_pci_remove_one, -}; - -static struct scsi_host_template svia_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, -}; - -static const struct ata_port_operations svia_sata_ops = { - .port_disable = ata_port_disable, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, - - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = ata_bmdma_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - - .scr_read = svia_scr_read, - .scr_write = svia_scr_write, - - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop, -}; - -static struct ata_port_info svia_port_info = { - .sht = &svia_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = 0x7f, - .port_ops = &svia_sata_ops, -}; - -MODULE_AUTHOR("Jeff Garzik"); -MODULE_DESCRIPTION("SCSI low-level driver for VIA SATA controllers"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, svia_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg) -{ - if (sc_reg > SCR_CONTROL) - return 0xffffffffU; - return inl(ap->ioaddr.scr_addr + (4 * sc_reg)); -} - -static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) -{ - if (sc_reg > SCR_CONTROL) - return; - outl(val, ap->ioaddr.scr_addr + (4 * sc_reg)); -} - -static const unsigned int svia_bar_sizes[] = { - 8, 4, 8, 4, 16, 256 -}; - -static const unsigned int vt6421_bar_sizes[] = { - 16, 16, 16, 16, 32, 128 -}; - -static unsigned long svia_scr_addr(unsigned long addr, unsigned int port) -{ - return addr + (port * 128); -} - -static unsigned long vt6421_scr_addr(unsigned long addr, unsigned int port) -{ - return addr + (port * 64); -} - -static void vt6421_init_addrs(struct ata_probe_ent *probe_ent, - struct pci_dev *pdev, - unsigned int port) -{ - unsigned long reg_addr = pci_resource_start(pdev, port); - unsigned long bmdma_addr = pci_resource_start(pdev, 4) + (port * 8); - unsigned long scr_addr; - - probe_ent->port[port].cmd_addr = reg_addr; - probe_ent->port[port].altstatus_addr = - probe_ent->port[port].ctl_addr = (reg_addr + 8) | ATA_PCI_CTL_OFS; - probe_ent->port[port].bmdma_addr = bmdma_addr; - - scr_addr = vt6421_scr_addr(pci_resource_start(pdev, 5), port); - probe_ent->port[port].scr_addr = scr_addr; - - ata_std_ports(&probe_ent->port[port]); -} - -static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev) -{ - struct ata_probe_ent *probe_ent; - struct ata_port_info *ppi = &svia_port_info; - - probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); - if (!probe_ent) - return NULL; - - probe_ent->port[0].scr_addr = - svia_scr_addr(pci_resource_start(pdev, 5), 0); - probe_ent->port[1].scr_addr = - svia_scr_addr(pci_resource_start(pdev, 5), 1); - - return probe_ent; -} - -static struct ata_probe_ent *vt6421_init_probe_ent(struct pci_dev *pdev) -{ - struct ata_probe_ent *probe_ent; - unsigned int i; - - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); - if (!probe_ent) - return NULL; - - memset(probe_ent, 0, sizeof(*probe_ent)); - probe_ent->dev = pci_dev_to_dev(pdev); - INIT_LIST_HEAD(&probe_ent->node); - - probe_ent->sht = &svia_sht; - probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY; - probe_ent->port_ops = &svia_sata_ops; - probe_ent->n_ports = N_PORTS; - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = IRQF_SHARED; - probe_ent->pio_mask = 0x1f; - probe_ent->mwdma_mask = 0x07; - probe_ent->udma_mask = 0x7f; - - for (i = 0; i < N_PORTS; i++) - vt6421_init_addrs(probe_ent, pdev, i); - - return probe_ent; -} - -static void svia_configure(struct pci_dev *pdev) -{ - u8 tmp8; - - pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8); - dev_printk(KERN_INFO, &pdev->dev, "routed to hard irq line %d\n", - (int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f); - - /* make sure SATA channels are enabled */ - pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8); - if ((tmp8 & ALL_PORTS) != ALL_PORTS) { - dev_printk(KERN_DEBUG, &pdev->dev, - "enabling SATA channels (0x%x)\n", - (int) tmp8); - tmp8 |= ALL_PORTS; - pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8); - } - - /* make sure interrupts for each channel sent to us */ - pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8); - if ((tmp8 & ALL_PORTS) != ALL_PORTS) { - dev_printk(KERN_DEBUG, &pdev->dev, - "enabling SATA channel interrupts (0x%x)\n", - (int) tmp8); - tmp8 |= ALL_PORTS; - pci_write_config_byte(pdev, SATA_INT_GATE, tmp8); - } - - /* make sure native mode is enabled */ - pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8); - if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) { - dev_printk(KERN_DEBUG, &pdev->dev, - "enabling SATA channel native mode (0x%x)\n", - (int) tmp8); - tmp8 |= NATIVE_MODE_ALL; - pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8); - } -} - -static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int printed_version; - unsigned int i; - int rc; - struct ata_probe_ent *probe_ent; - int board_id = (int) ent->driver_data; - const int *bar_sizes; - int pci_dev_busy = 0; - u8 tmp8; - - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - pci_dev_busy = 1; - goto err_out; - } - - if (board_id == vt6420) { - pci_read_config_byte(pdev, SATA_PATA_SHARING, &tmp8); - if (tmp8 & SATA_2DEV) { - dev_printk(KERN_ERR, &pdev->dev, - "SATA master/slave not supported (0x%x)\n", - (int) tmp8); - rc = -EIO; - goto err_out_regions; - } - - bar_sizes = &svia_bar_sizes[0]; - } else { - bar_sizes = &vt6421_bar_sizes[0]; - } - - for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++) - if ((pci_resource_start(pdev, i) == 0) || - (pci_resource_len(pdev, i) < bar_sizes[i])) { - dev_printk(KERN_ERR, &pdev->dev, - "invalid PCI BAR %u (sz 0x%llx, val 0x%llx)\n", - i, - (unsigned long long)pci_resource_start(pdev, i), - (unsigned long long)pci_resource_len(pdev, i)); - rc = -ENODEV; - goto err_out_regions; - } - - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - - if (board_id == vt6420) - probe_ent = vt6420_init_probe_ent(pdev); - else - probe_ent = vt6421_init_probe_ent(pdev); - - if (!probe_ent) { - dev_printk(KERN_ERR, &pdev->dev, "out of memory\n"); - rc = -ENOMEM; - goto err_out_regions; - } - - svia_configure(pdev); - - pci_set_master(pdev); - - /* FIXME: check ata_device_add return value */ - ata_device_add(probe_ent); - kfree(probe_ent); - - return 0; - -err_out_regions: - pci_release_regions(pdev); -err_out: - if (!pci_dev_busy) - pci_disable_device(pdev); - return rc; -} - -static int __init svia_init(void) -{ - return pci_register_driver(&svia_pci_driver); -} - -static void __exit svia_exit(void) -{ - pci_unregister_driver(&svia_pci_driver); -} - -module_init(svia_init); -module_exit(svia_exit); - diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c deleted file mode 100644 index 4c69a705a48..00000000000 --- a/drivers/scsi/sata_vsc.c +++ /dev/null @@ -1,482 +0,0 @@ -/* - * sata_vsc.c - Vitesse VSC7174 4 port DPA SATA - * - * Maintained by: Jeremy Higdon @ SGI - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * Copyright 2004 SGI - * - * Bits from Jeff Garzik, Copyright RedHat, Inc. - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Vitesse hardware documentation presumably available under NDA. - * Intel 31244 (same hardware interface) documentation presumably - * available from http://developer.intel.com/ - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "sata_vsc" -#define DRV_VERSION "2.0" - -enum { - /* Interrupt register offsets (from chip base address) */ - VSC_SATA_INT_STAT_OFFSET = 0x00, - VSC_SATA_INT_MASK_OFFSET = 0x04, - - /* Taskfile registers offsets */ - VSC_SATA_TF_CMD_OFFSET = 0x00, - VSC_SATA_TF_DATA_OFFSET = 0x00, - VSC_SATA_TF_ERROR_OFFSET = 0x04, - VSC_SATA_TF_FEATURE_OFFSET = 0x06, - VSC_SATA_TF_NSECT_OFFSET = 0x08, - VSC_SATA_TF_LBAL_OFFSET = 0x0c, - VSC_SATA_TF_LBAM_OFFSET = 0x10, - VSC_SATA_TF_LBAH_OFFSET = 0x14, - VSC_SATA_TF_DEVICE_OFFSET = 0x18, - VSC_SATA_TF_STATUS_OFFSET = 0x1c, - VSC_SATA_TF_COMMAND_OFFSET = 0x1d, - VSC_SATA_TF_ALTSTATUS_OFFSET = 0x28, - VSC_SATA_TF_CTL_OFFSET = 0x29, - - /* DMA base */ - VSC_SATA_UP_DESCRIPTOR_OFFSET = 0x64, - VSC_SATA_UP_DATA_BUFFER_OFFSET = 0x6C, - VSC_SATA_DMA_CMD_OFFSET = 0x70, - - /* SCRs base */ - VSC_SATA_SCR_STATUS_OFFSET = 0x100, - VSC_SATA_SCR_ERROR_OFFSET = 0x104, - VSC_SATA_SCR_CONTROL_OFFSET = 0x108, - - /* Port stride */ - VSC_SATA_PORT_OFFSET = 0x200, - - /* Error interrupt status bit offsets */ - VSC_SATA_INT_ERROR_CRC = 0x40, - VSC_SATA_INT_ERROR_T = 0x20, - VSC_SATA_INT_ERROR_P = 0x10, - VSC_SATA_INT_ERROR_R = 0x8, - VSC_SATA_INT_ERROR_E = 0x4, - VSC_SATA_INT_ERROR_M = 0x2, - VSC_SATA_INT_PHY_CHANGE = 0x1, - VSC_SATA_INT_ERROR = (VSC_SATA_INT_ERROR_CRC | VSC_SATA_INT_ERROR_T | \ - VSC_SATA_INT_ERROR_P | VSC_SATA_INT_ERROR_R | \ - VSC_SATA_INT_ERROR_E | VSC_SATA_INT_ERROR_M | \ - VSC_SATA_INT_PHY_CHANGE), -}; - - -#define is_vsc_sata_int_err(port_idx, int_status) \ - (int_status & (VSC_SATA_INT_ERROR << (8 * port_idx))) - - -static u32 vsc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) -{ - if (sc_reg > SCR_CONTROL) - return 0xffffffffU; - return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); -} - - -static void vsc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, - u32 val) -{ - if (sc_reg > SCR_CONTROL) - return; - writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); -} - - -static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl) -{ - void __iomem *mask_addr; - u8 mask; - - mask_addr = ap->host_set->mmio_base + - VSC_SATA_INT_MASK_OFFSET + ap->port_no; - mask = readb(mask_addr); - if (ctl & ATA_NIEN) - mask |= 0x80; - else - mask &= 0x7F; - writeb(mask, mask_addr); -} - - -static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; - - /* - * The only thing the ctl register is used for is SRST. - * That is not enabled or disabled via tf_load. - * However, if ATA_NIEN is changed, then we need to change the interrupt register. - */ - if ((tf->ctl & ATA_NIEN) != (ap->last_ctl & ATA_NIEN)) { - ap->last_ctl = tf->ctl; - vsc_intr_mask_update(ap, tf->ctl & ATA_NIEN); - } - if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { - writew(tf->feature | (((u16)tf->hob_feature) << 8), ioaddr->feature_addr); - writew(tf->nsect | (((u16)tf->hob_nsect) << 8), ioaddr->nsect_addr); - writew(tf->lbal | (((u16)tf->hob_lbal) << 8), ioaddr->lbal_addr); - writew(tf->lbam | (((u16)tf->hob_lbam) << 8), ioaddr->lbam_addr); - writew(tf->lbah | (((u16)tf->hob_lbah) << 8), ioaddr->lbah_addr); - } else if (is_addr) { - writew(tf->feature, ioaddr->feature_addr); - writew(tf->nsect, ioaddr->nsect_addr); - writew(tf->lbal, ioaddr->lbal_addr); - writew(tf->lbam, ioaddr->lbam_addr); - writew(tf->lbah, ioaddr->lbah_addr); - } - - if (tf->flags & ATA_TFLAG_DEVICE) - writeb(tf->device, ioaddr->device_addr); - - ata_wait_idle(ap); -} - - -static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - u16 nsect, lbal, lbam, lbah, feature; - - tf->command = ata_check_status(ap); - tf->device = readw(ioaddr->device_addr); - feature = readw(ioaddr->error_addr); - nsect = readw(ioaddr->nsect_addr); - lbal = readw(ioaddr->lbal_addr); - lbam = readw(ioaddr->lbam_addr); - lbah = readw(ioaddr->lbah_addr); - - tf->feature = feature; - tf->nsect = nsect; - tf->lbal = lbal; - tf->lbam = lbam; - tf->lbah = lbah; - - if (tf->flags & ATA_TFLAG_LBA48) { - tf->hob_feature = feature >> 8; - tf->hob_nsect = nsect >> 8; - tf->hob_lbal = lbal >> 8; - tf->hob_lbam = lbam >> 8; - tf->hob_lbah = lbah >> 8; - } -} - - -/* - * vsc_sata_interrupt - * - * Read the interrupt register and process for the devices that have them pending. - */ -static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance, - struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - unsigned int i; - unsigned int handled = 0; - u32 int_status; - - spin_lock(&host_set->lock); - - int_status = readl(host_set->mmio_base + VSC_SATA_INT_STAT_OFFSET); - - for (i = 0; i < host_set->n_ports; i++) { - if (int_status & ((u32) 0xFF << (8 * i))) { - struct ata_port *ap; - - ap = host_set->ports[i]; - - if (is_vsc_sata_int_err(i, int_status)) { - u32 err_status; - printk(KERN_DEBUG "%s: ignoring interrupt(s)\n", __FUNCTION__); - err_status = ap ? vsc_sata_scr_read(ap, SCR_ERROR) : 0; - vsc_sata_scr_write(ap, SCR_ERROR, err_status); - handled++; - } - - if (ap && !(ap->flags & ATA_FLAG_DISABLED)) { - struct ata_queued_cmd *qc; - - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) - handled += ata_host_intr(ap, qc); - else if (is_vsc_sata_int_err(i, int_status)) { - /* - * On some chips (i.e. Intel 31244), an error - * interrupt will sneak in at initialization - * time (phy state changes). Clearing the SCR - * error register is not required, but it prevents - * the phy state change interrupts from recurring - * later. - */ - u32 err_status; - err_status = vsc_sata_scr_read(ap, SCR_ERROR); - printk(KERN_DEBUG "%s: clearing interrupt, " - "status %x; sata err status %x\n", - __FUNCTION__, - int_status, err_status); - vsc_sata_scr_write(ap, SCR_ERROR, err_status); - /* Clear interrupt status */ - ata_chk_status(ap); - handled++; - } - } - } - } - - spin_unlock(&host_set->lock); - - return IRQ_RETVAL(handled); -} - - -static struct scsi_host_template vsc_sata_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, -}; - - -static const struct ata_port_operations vsc_sata_ops = { - .port_disable = ata_port_disable, - .tf_load = vsc_sata_tf_load, - .tf_read = vsc_sata_tf_read, - .exec_command = ata_exec_command, - .check_status = ata_check_status, - .dev_select = ata_std_dev_select, - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_mmio_data_xfer, - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = ata_bmdma_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - .irq_handler = vsc_sata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .scr_read = vsc_sata_scr_read, - .scr_write = vsc_sata_scr_write, - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_pci_host_stop, -}; - -static void __devinit vsc_sata_setup_port(struct ata_ioports *port, unsigned long base) -{ - port->cmd_addr = base + VSC_SATA_TF_CMD_OFFSET; - port->data_addr = base + VSC_SATA_TF_DATA_OFFSET; - port->error_addr = base + VSC_SATA_TF_ERROR_OFFSET; - port->feature_addr = base + VSC_SATA_TF_FEATURE_OFFSET; - port->nsect_addr = base + VSC_SATA_TF_NSECT_OFFSET; - port->lbal_addr = base + VSC_SATA_TF_LBAL_OFFSET; - port->lbam_addr = base + VSC_SATA_TF_LBAM_OFFSET; - port->lbah_addr = base + VSC_SATA_TF_LBAH_OFFSET; - port->device_addr = base + VSC_SATA_TF_DEVICE_OFFSET; - port->status_addr = base + VSC_SATA_TF_STATUS_OFFSET; - port->command_addr = base + VSC_SATA_TF_COMMAND_OFFSET; - port->altstatus_addr = base + VSC_SATA_TF_ALTSTATUS_OFFSET; - port->ctl_addr = base + VSC_SATA_TF_CTL_OFFSET; - port->bmdma_addr = base + VSC_SATA_DMA_CMD_OFFSET; - port->scr_addr = base + VSC_SATA_SCR_STATUS_OFFSET; - writel(0, base + VSC_SATA_UP_DESCRIPTOR_OFFSET); - writel(0, base + VSC_SATA_UP_DATA_BUFFER_OFFSET); -} - - -static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int printed_version; - struct ata_probe_ent *probe_ent = NULL; - unsigned long base; - int pci_dev_busy = 0; - void __iomem *mmio_base; - int rc; - - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - /* - * Check if we have needed resource mapped. - */ - if (pci_resource_len(pdev, 0) == 0) { - rc = -ENODEV; - goto err_out; - } - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - pci_dev_busy = 1; - goto err_out; - } - - /* - * Use 32 bit DMA mask, because 64 bit address support is poor. - */ - rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) - goto err_out_regions; - rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) - goto err_out_regions; - - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); - if (probe_ent == NULL) { - rc = -ENOMEM; - goto err_out_regions; - } - memset(probe_ent, 0, sizeof(*probe_ent)); - probe_ent->dev = pci_dev_to_dev(pdev); - INIT_LIST_HEAD(&probe_ent->node); - - mmio_base = pci_iomap(pdev, 0, 0); - if (mmio_base == NULL) { - rc = -ENOMEM; - goto err_out_free_ent; - } - base = (unsigned long) mmio_base; - - /* - * Due to a bug in the chip, the default cache line size can't be used - */ - pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80); - - probe_ent->sht = &vsc_sata_sht; - probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO; - probe_ent->port_ops = &vsc_sata_ops; - probe_ent->n_ports = 4; - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = IRQF_SHARED; - probe_ent->mmio_base = mmio_base; - - /* We don't care much about the PIO/UDMA masks, but the core won't like us - * if we don't fill these - */ - probe_ent->pio_mask = 0x1f; - probe_ent->mwdma_mask = 0x07; - probe_ent->udma_mask = 0x7f; - - /* We have 4 ports per PCI function */ - vsc_sata_setup_port(&probe_ent->port[0], base + 1 * VSC_SATA_PORT_OFFSET); - vsc_sata_setup_port(&probe_ent->port[1], base + 2 * VSC_SATA_PORT_OFFSET); - vsc_sata_setup_port(&probe_ent->port[2], base + 3 * VSC_SATA_PORT_OFFSET); - vsc_sata_setup_port(&probe_ent->port[3], base + 4 * VSC_SATA_PORT_OFFSET); - - pci_set_master(pdev); - - /* - * Config offset 0x98 is "Extended Control and Status Register 0" - * Default value is (1 << 28). All bits except bit 28 are reserved in - * DPA mode. If bit 28 is set, LED 0 reflects all ports' activity. - * If bit 28 is clear, each port has its own LED. - */ - pci_write_config_dword(pdev, 0x98, 0); - - /* FIXME: check ata_device_add return value */ - ata_device_add(probe_ent); - kfree(probe_ent); - - return 0; - -err_out_free_ent: - kfree(probe_ent); -err_out_regions: - pci_release_regions(pdev); -err_out: - if (!pci_dev_busy) - pci_disable_device(pdev); - return rc; -} - - -static const struct pci_device_id vsc_sata_pci_tbl[] = { - { PCI_VENDOR_ID_VITESSE, 0x7174, - PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 }, - { PCI_VENDOR_ID_INTEL, 0x3200, - PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 }, - { } /* terminate list */ -}; - - -static struct pci_driver vsc_sata_pci_driver = { - .name = DRV_NAME, - .id_table = vsc_sata_pci_tbl, - .probe = vsc_sata_init_one, - .remove = ata_pci_remove_one, -}; - - -static int __init vsc_sata_init(void) -{ - return pci_register_driver(&vsc_sata_pci_driver); -} - - -static void __exit vsc_sata_exit(void) -{ - pci_unregister_driver(&vsc_sata_pci_driver); -} - - -MODULE_AUTHOR("Jeremy Higdon"); -MODULE_DESCRIPTION("low-level driver for Vitesse VSC7174 SATA controller"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, vsc_sata_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -module_init(vsc_sata_init); -module_exit(vsc_sata_exit); -- cgit v1.2.3 From b352e57dc3bb5033996adaa67c2f69b795eddd39 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 10 Aug 2006 18:52:12 +0100 Subject: [PATCH] libata: Add CompactFlash support The CFA world has some additional rules and drive modes we need to support for newer expansion cards and on embedded boxes Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 62 +++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 54 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 0ac0b519cf2..9092416a630 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -386,9 +386,13 @@ static const char *ata_mode_string(unsigned int xfer_mask) "PIO2", "PIO3", "PIO4", + "PIO5", + "PIO6", "MWDMA0", "MWDMA1", "MWDMA2", + "MWDMA3", + "MWDMA4", "UDMA/16", "UDMA/25", "UDMA/33", @@ -875,6 +879,23 @@ static unsigned int ata_id_xfermask(const u16 *id) mwdma_mask = id[ATA_ID_MWDMA_MODES] & 0x07; + if (ata_id_is_cfa(id)) { + /* + * Process compact flash extended modes + */ + int pio = id[163] & 0x7; + int dma = (id[163] >> 3) & 7; + + if (pio) + pio_mask |= (1 << 5); + if (pio > 1) + pio_mask |= (1 << 6); + if (dma) + mwdma_mask |= (1 << 3); + if (dma > 1) + mwdma_mask |= (1 << 4); + } + udma_mask = 0; if (id[ATA_ID_FIELD_VALID] & (1 << 2)) udma_mask = id[ATA_ID_UDMA_MODES] & 0xff; @@ -1356,6 +1377,7 @@ int ata_dev_configure(struct ata_device *dev, int print_info) struct ata_port *ap = dev->ap; const u16 *id = dev->id; unsigned int xfer_mask; + char revbuf[7]; /* XYZ-99\0 */ int rc; if (!ata_dev_enabled(dev) && ata_msg_info(ap)) { @@ -1399,6 +1421,15 @@ int ata_dev_configure(struct ata_device *dev, int print_info) /* ATA-specific feature tests */ if (dev->class == ATA_DEV_ATA) { + if (ata_id_is_cfa(id)) { + if (id[162] & 1) /* CPRM may make this media unusable */ + ata_dev_printk(dev, KERN_WARNING, "ata%u: device %u supports DRM functions and may not be fully accessable.\n", + ap->id, dev->devno); + snprintf(revbuf, 7, "CFA"); + } + else + snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id)); + dev->n_sectors = ata_id_n_sectors(id); if (ata_id_has_lba(id)) { @@ -1417,9 +1448,9 @@ int ata_dev_configure(struct ata_device *dev, int print_info) /* print device info to dmesg */ if (ata_msg_drv(ap) && print_info) - ata_dev_printk(dev, KERN_INFO, "ATA-%d, " + ata_dev_printk(dev, KERN_INFO, "%s, " "max %s, %Lu sectors: %s %s\n", - ata_id_major_version(id), + revbuf, ata_mode_string(xfer_mask), (unsigned long long)dev->n_sectors, lba_desc, ncq_desc); @@ -1440,9 +1471,9 @@ int ata_dev_configure(struct ata_device *dev, int print_info) /* print device info to dmesg */ if (ata_msg_drv(ap) && print_info) - ata_dev_printk(dev, KERN_INFO, "ATA-%d, " + ata_dev_printk(dev, KERN_INFO, "%s, " "max %s, %Lu sectors: CHS %u/%u/%u\n", - ata_id_major_version(id), + revbuf, ata_mode_string(xfer_mask), (unsigned long long)dev->n_sectors, dev->cylinders, dev->heads, @@ -1900,10 +1931,11 @@ int sata_set_spd(struct ata_port *ap) * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik */ /* - * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). + * PIO 0-4, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). * These were taken from ATA/ATAPI-6 standard, rev 0a, except - * for PIO 5, which is a nonstandard extension and UDMA6, which - * is currently supported only by Maxtor drives. + * for UDMA6, which is currently supported only by Maxtor drives. + * + * For PIO 5/6 MWDMA 3/4 see the CFA specification 3.0. */ static const struct ata_timing ata_timing[] = { @@ -1913,6 +1945,8 @@ static const struct ata_timing ata_timing[] = { { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, + { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 80, 0 }, + { XFER_MW_DMA_3, 25, 0, 0, 0, 65, 25, 100, 0 }, { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, @@ -1927,7 +1961,8 @@ static const struct ata_timing ata_timing[] = { { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, -/* { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 }, */ + { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 80, 0 }, + { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 100, 0 }, { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, @@ -3062,6 +3097,17 @@ static void ata_dev_xfermask(struct ata_device *dev) dev->mwdma_mask, dev->udma_mask); xfer_mask &= ata_id_xfermask(dev->id); + /* + * CFA Advanced TrueIDE timings are not allowed on a shared + * cable + */ + if (ata_dev_pair(dev)) { + /* No PIO5 or PIO6 */ + xfer_mask &= ~(0x03 << (ATA_SHIFT_PIO + 5)); + /* No MWDMA3 or MWDMA 4 */ + xfer_mask &= ~(0x03 << (ATA_SHIFT_MWDMA + 3)); + } + if (ata_dma_blacklisted(dev)) { xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); ata_dev_printk(dev, KERN_WARNING, -- cgit v1.2.3 From 8ad92ba7152f40cc31f6f15500c01e4eb39cfed1 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 14 Aug 2006 14:10:07 -0400 Subject: libata: Remove SCSI_ prefix from Kconfig symbols Signed-off-by: Jeff Garzik --- drivers/ata/Kconfig | 34 +++++++++++++++++----------------- drivers/ata/Makefile | 30 +++++++++++++++--------------- 2 files changed, 32 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 95d6b417af6..03d96894419 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -9,7 +9,7 @@ config ATA that "speaks" the ATA protocol, also called ATA controller), because you will be asked for it. -config SCSI_SATA_AHCI +config SATA_AHCI tristate "AHCI SATA support" depends on ATA && PCI help @@ -17,7 +17,7 @@ config SCSI_SATA_AHCI If unsure, say N. -config SCSI_SATA_SVW +config SATA_SVW tristate "ServerWorks Frodo / Apple K2 SATA support" depends on ATA && PCI help @@ -26,7 +26,7 @@ config SCSI_SATA_SVW If unsure, say N. -config SCSI_ATA_PIIX +config ATA_PIIX tristate "Intel PIIX/ICH SATA support" depends on ATA && PCI help @@ -36,7 +36,7 @@ config SCSI_ATA_PIIX If unsure, say N. -config SCSI_SATA_MV +config SATA_MV tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" depends on ATA && PCI && EXPERIMENTAL help @@ -45,7 +45,7 @@ config SCSI_SATA_MV If unsure, say N. -config SCSI_SATA_NV +config SATA_NV tristate "NVIDIA SATA support" depends on ATA && PCI help @@ -53,7 +53,7 @@ config SCSI_SATA_NV If unsure, say N. -config SCSI_PDC_ADMA +config PDC_ADMA tristate "Pacific Digital ADMA support" depends on ATA && PCI help @@ -61,7 +61,7 @@ config SCSI_PDC_ADMA If unsure, say N. -config SCSI_SATA_QSTOR +config SATA_QSTOR tristate "Pacific Digital SATA QStor support" depends on ATA && PCI help @@ -69,7 +69,7 @@ config SCSI_SATA_QSTOR If unsure, say N. -config SCSI_SATA_PROMISE +config SATA_PROMISE tristate "Promise SATA TX2/TX4 support" depends on ATA && PCI help @@ -77,7 +77,7 @@ config SCSI_SATA_PROMISE If unsure, say N. -config SCSI_SATA_SX4 +config SATA_SX4 tristate "Promise SATA SX4 support" depends on ATA && PCI && EXPERIMENTAL help @@ -85,7 +85,7 @@ config SCSI_SATA_SX4 If unsure, say N. -config SCSI_SATA_SIL +config SATA_SIL tristate "Silicon Image SATA support" depends on ATA && PCI help @@ -93,7 +93,7 @@ config SCSI_SATA_SIL If unsure, say N. -config SCSI_SATA_SIL24 +config SATA_SIL24 tristate "Silicon Image 3124/3132 SATA support" depends on ATA && PCI help @@ -101,7 +101,7 @@ config SCSI_SATA_SIL24 If unsure, say N. -config SCSI_SATA_SIS +config SATA_SIS tristate "SiS 964/180 SATA support" depends on ATA && PCI help @@ -109,7 +109,7 @@ config SCSI_SATA_SIS If unsure, say N. -config SCSI_SATA_ULI +config SATA_ULI tristate "ULi Electronics SATA support" depends on ATA && PCI help @@ -117,7 +117,7 @@ config SCSI_SATA_ULI If unsure, say N. -config SCSI_SATA_VIA +config SATA_VIA tristate "VIA SATA support" depends on ATA && PCI help @@ -125,7 +125,7 @@ config SCSI_SATA_VIA If unsure, say N. -config SCSI_SATA_VITESSE +config SATA_VITESSE tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" depends on ATA && PCI help @@ -133,8 +133,8 @@ config SCSI_SATA_VITESSE If unsure, say N. -config SCSI_SATA_INTEL_COMBINED +config SATA_INTEL_COMBINED bool - depends on IDE=y && !BLK_DEV_IDE_SATA && (SCSI_SATA_AHCI || SCSI_ATA_PIIX) + depends on IDE=y && !BLK_DEV_IDE_SATA && (SATA_AHCI || ATA_PIIX) default y diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 60bdb7b2b5c..b19a773cef7 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -1,19 +1,19 @@ -obj-$(CONFIG_SCSI_SATA_AHCI) += libata.o ahci.o -obj-$(CONFIG_SCSI_SATA_SVW) += libata.o sata_svw.o -obj-$(CONFIG_SCSI_ATA_PIIX) += libata.o ata_piix.o -obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o -obj-$(CONFIG_SCSI_SATA_QSTOR) += libata.o sata_qstor.o -obj-$(CONFIG_SCSI_SATA_SIL) += libata.o sata_sil.o -obj-$(CONFIG_SCSI_SATA_SIL24) += libata.o sata_sil24.o -obj-$(CONFIG_SCSI_SATA_VIA) += libata.o sata_via.o -obj-$(CONFIG_SCSI_SATA_VITESSE) += libata.o sata_vsc.o -obj-$(CONFIG_SCSI_SATA_SIS) += libata.o sata_sis.o -obj-$(CONFIG_SCSI_SATA_SX4) += libata.o sata_sx4.o -obj-$(CONFIG_SCSI_SATA_NV) += libata.o sata_nv.o -obj-$(CONFIG_SCSI_SATA_ULI) += libata.o sata_uli.o -obj-$(CONFIG_SCSI_SATA_MV) += libata.o sata_mv.o -obj-$(CONFIG_SCSI_PDC_ADMA) += libata.o pdc_adma.o +obj-$(CONFIG_SATA_AHCI) += libata.o ahci.o +obj-$(CONFIG_SATA_SVW) += libata.o sata_svw.o +obj-$(CONFIG_ATA_PIIX) += libata.o ata_piix.o +obj-$(CONFIG_SATA_PROMISE) += libata.o sata_promise.o +obj-$(CONFIG_SATA_QSTOR) += libata.o sata_qstor.o +obj-$(CONFIG_SATA_SIL) += libata.o sata_sil.o +obj-$(CONFIG_SATA_SIL24) += libata.o sata_sil24.o +obj-$(CONFIG_SATA_VIA) += libata.o sata_via.o +obj-$(CONFIG_SATA_VITESSE) += libata.o sata_vsc.o +obj-$(CONFIG_SATA_SIS) += libata.o sata_sis.o +obj-$(CONFIG_SATA_SX4) += libata.o sata_sx4.o +obj-$(CONFIG_SATA_NV) += libata.o sata_nv.o +obj-$(CONFIG_SATA_ULI) += libata.o sata_uli.o +obj-$(CONFIG_SATA_MV) += libata.o sata_mv.o +obj-$(CONFIG_PDC_ADMA) += libata.o pdc_adma.o libata-objs := libata-core.o libata-scsi.o libata-bmdma.o libata-eh.o -- cgit v1.2.3 From 370ba07eb8324569636bacb47abba79587640d05 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 14 Aug 2006 14:12:57 -0400 Subject: libata: Separate libata.ko build from individual driver builds Since some SAS drivers need libata, we can no longer use the rule that auto-builds libata.ko as needed. We must instead depend on Kconfig to determine when to build the library kernel module. Noticed by Brian King @ IBM. Signed-off-by: Jeff Garzik --- drivers/ata/Makefile | 32 +++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index b19a773cef7..c17ae9c8b91 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -1,19 +1,21 @@ -obj-$(CONFIG_SATA_AHCI) += libata.o ahci.o -obj-$(CONFIG_SATA_SVW) += libata.o sata_svw.o -obj-$(CONFIG_ATA_PIIX) += libata.o ata_piix.o -obj-$(CONFIG_SATA_PROMISE) += libata.o sata_promise.o -obj-$(CONFIG_SATA_QSTOR) += libata.o sata_qstor.o -obj-$(CONFIG_SATA_SIL) += libata.o sata_sil.o -obj-$(CONFIG_SATA_SIL24) += libata.o sata_sil24.o -obj-$(CONFIG_SATA_VIA) += libata.o sata_via.o -obj-$(CONFIG_SATA_VITESSE) += libata.o sata_vsc.o -obj-$(CONFIG_SATA_SIS) += libata.o sata_sis.o -obj-$(CONFIG_SATA_SX4) += libata.o sata_sx4.o -obj-$(CONFIG_SATA_NV) += libata.o sata_nv.o -obj-$(CONFIG_SATA_ULI) += libata.o sata_uli.o -obj-$(CONFIG_SATA_MV) += libata.o sata_mv.o -obj-$(CONFIG_PDC_ADMA) += libata.o pdc_adma.o +obj-$(CONFIG_ATA) += libata.o + +obj-$(CONFIG_SATA_AHCI) += ahci.o +obj-$(CONFIG_SATA_SVW) += sata_svw.o +obj-$(CONFIG_ATA_PIIX) += ata_piix.o +obj-$(CONFIG_SATA_PROMISE) += sata_promise.o +obj-$(CONFIG_SATA_QSTOR) += sata_qstor.o +obj-$(CONFIG_SATA_SIL) += sata_sil.o +obj-$(CONFIG_SATA_SIL24) += sata_sil24.o +obj-$(CONFIG_SATA_VIA) += sata_via.o +obj-$(CONFIG_SATA_VITESSE) += sata_vsc.o +obj-$(CONFIG_SATA_SIS) += sata_sis.o +obj-$(CONFIG_SATA_SX4) += sata_sx4.o +obj-$(CONFIG_SATA_NV) += sata_nv.o +obj-$(CONFIG_SATA_ULI) += sata_uli.o +obj-$(CONFIG_SATA_MV) += sata_mv.o +obj-$(CONFIG_PDC_ADMA) += pdc_adma.o libata-objs := libata-core.o libata-scsi.o libata-bmdma.o libata-eh.o -- cgit v1.2.3 From 24dd01bfbce685395dc0ade71308326b3861187a Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 14 Aug 2006 14:22:54 -0400 Subject: [libata] ata_piix: add missing kfree() Noticed by Andrew Morton. Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 46c34fd5af8..51d919c8073 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -932,7 +932,11 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) static void piix_host_stop(struct ata_host_set *host_set) { + struct piix_host_priv *hpriv = host_set->private_data; + ata_host_stop(host_set); + + kfree(hpriv); } static int __init piix_init(void) -- cgit v1.2.3 From 421b20b9c44b3fcdc07d6af875dad5ae86fad014 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 14 Aug 2006 14:27:36 -0400 Subject: libata: Make sure drivers/ata is a separate Kconfig menu Noticed by Rafael J. Wysocki Signed-off-by: Jeff Garzik --- drivers/ata/Kconfig | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 03d96894419..2109d755c14 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -1,3 +1,9 @@ +# +# SATA/PATA driver configuration +# + +menu "Serial ATA (prod) and Parallel ATA (experimental) drivers" + depends on SCSI config ATA tristate "ATA device support" @@ -138,3 +144,5 @@ config SATA_INTEL_COMBINED depends on IDE=y && !BLK_DEV_IDE_SATA && (SATA_AHCI || ATA_PIIX) default y +endmenu + -- cgit v1.2.3 From 7796705244d1f04053acf24bee7eb2983f9cfeaf Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 19 Aug 2006 03:54:39 +0900 Subject: [PATCH] libata: s/CONFIG_SCSI_SATA/CONFIG_[S]ATA/g in pci/quirks.c drivers/pci/quirks.c was not updated when libata config constants were renamed braking several libata quirks. Fix it. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/pci/quirks.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index fb08bc951ac..2d967b460d9 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1209,7 +1209,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus ); -#if defined(CONFIG_SCSI_SATA) || defined(CONFIG_SCSI_SATA_MODULE) +#if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE) /* * If we are using libata we can drive this chip properly but must @@ -1299,7 +1299,7 @@ static int __init combined_setup(char *str) } __setup("combined_mode=", combined_setup); -#ifdef CONFIG_SCSI_SATA_INTEL_COMBINED +#ifdef CONFIG_SATA_INTEL_COMBINED static void __devinit quirk_intel_ide_combined(struct pci_dev *pdev) { u8 prog, comb, tmp; @@ -1392,7 +1392,7 @@ static void __devinit quirk_intel_ide_combined(struct pci_dev *pdev) request_region(0x170, 8, "libata"); /* port 1 */ } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_intel_ide_combined ); -#endif /* CONFIG_SCSI_SATA_INTEL_COMBINED */ +#endif /* CONFIG_SATA_INTEL_COMBINED */ int pcie_mch_quirk; -- cgit v1.2.3 From 08be09b7c38a71b1677285c10a08725833ff9b95 Mon Sep 17 00:00:00 2001 From: Jay Cliburn Date: Mon, 7 Aug 2006 22:08:30 -0500 Subject: [PATCH] sata_via: Add SATA support for vt8237a This patch adds support for the VIA Technologies VT8237A SATA controller, used, for example, on the ASUS M2V socket AM2 motherboard. Signed-off-by: Jay Cliburn Signed-off-by: Jeff Garzik --- drivers/ata/sata_via.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 0bf1dbea640..6529189a288 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -76,6 +76,7 @@ static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg); static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); static const struct pci_device_id svia_pci_tbl[] = { + { 0x1106, 0x0591, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6420 }, { 0x1106, 0x3149, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6420 }, { 0x1106, 0x3249, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6421 }, -- cgit v1.2.3 From 281d426c7e64286f433645e27862e7744b1e9310 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 14 Aug 2006 22:49:30 -0700 Subject: [PATCH] CONFIG_PM=n slim: drivers/scsi/sata_sil* Remove some code which is unneeded if CONFIG_PM=n. Signed-off-by: Alexey Dobriyan Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/ata/sata_sil.c | 6 ++++++ drivers/ata/sata_sil24.c | 6 ++++++ 2 files changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index 907faa87239..f17b3ae4dd3 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -109,7 +109,9 @@ enum { }; static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); +#ifdef CONFIG_PM static int sil_pci_device_resume(struct pci_dev *pdev); +#endif static void sil_dev_config(struct ata_port *ap, struct ata_device *dev); static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg); static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); @@ -157,8 +159,10 @@ static struct pci_driver sil_pci_driver = { .id_table = sil_pci_tbl, .probe = sil_init_one, .remove = ata_pci_remove_one, +#ifdef CONFIG_PM .suspend = ata_pci_device_suspend, .resume = sil_pci_device_resume, +#endif }; static struct scsi_host_template sil_sht = { @@ -696,6 +700,7 @@ err_out: return rc; } +#ifdef CONFIG_PM static int sil_pci_device_resume(struct pci_dev *pdev) { struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); @@ -707,6 +712,7 @@ static int sil_pci_device_resume(struct pci_dev *pdev) return 0; } +#endif static int __init sil_init(void) { diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 3a0161ddc33..2d7cf326458 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -339,7 +339,9 @@ static int sil24_port_start(struct ata_port *ap); static void sil24_port_stop(struct ata_port *ap); static void sil24_host_stop(struct ata_host_set *host_set); static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +#ifdef CONFIG_PM static int sil24_pci_device_resume(struct pci_dev *pdev); +#endif static const struct pci_device_id sil24_pci_tbl[] = { { 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 }, @@ -355,8 +357,10 @@ static struct pci_driver sil24_pci_driver = { .id_table = sil24_pci_tbl, .probe = sil24_init_one, .remove = ata_pci_remove_one, /* safe? */ +#ifdef CONFIG_PM .suspend = ata_pci_device_suspend, .resume = sil24_pci_device_resume, +#endif }; static struct scsi_host_template sil24_sht = { @@ -1184,6 +1188,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return rc; } +#ifdef CONFIG_PM static int sil24_pci_device_resume(struct pci_dev *pdev) { struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); @@ -1202,6 +1207,7 @@ static int sil24_pci_device_resume(struct pci_dev *pdev) return 0; } +#endif static int __init sil24_init(void) { -- cgit v1.2.3 From 81ce3c4b4d3771866ce74b1c3856b45c3e2549fc Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 24 Aug 2006 02:41:25 -0400 Subject: Clean up drivers/ata/Kconfig a bit. --- drivers/ata/Kconfig | 36 +++++++++++++++++++----------------- 1 file changed, 19 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 2109d755c14..13027d56b7f 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -3,11 +3,10 @@ # menu "Serial ATA (prod) and Parallel ATA (experimental) drivers" - depends on SCSI config ATA tristate "ATA device support" - depends on SCSI + select SCSI ---help--- If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or any other ATA device under Linux, say Y and make sure that you know @@ -15,9 +14,11 @@ config ATA that "speaks" the ATA protocol, also called ATA controller), because you will be asked for it. +if ATA + config SATA_AHCI tristate "AHCI SATA support" - depends on ATA && PCI + depends on PCI help This option enables support for AHCI Serial ATA. @@ -25,7 +26,7 @@ config SATA_AHCI config SATA_SVW tristate "ServerWorks Frodo / Apple K2 SATA support" - depends on ATA && PCI + depends on PCI help This option enables support for Broadcom/Serverworks/Apple K2 SATA support. @@ -34,7 +35,7 @@ config SATA_SVW config ATA_PIIX tristate "Intel PIIX/ICH SATA support" - depends on ATA && PCI + depends on PCI help This option enables support for ICH5/6/7/8 Serial ATA. If PATA support was enabled previously, this enables @@ -44,7 +45,7 @@ config ATA_PIIX config SATA_MV tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" - depends on ATA && PCI && EXPERIMENTAL + depends on PCI && EXPERIMENTAL help This option enables support for the Marvell Serial ATA family. Currently supports 88SX[56]0[48][01] chips. @@ -53,7 +54,7 @@ config SATA_MV config SATA_NV tristate "NVIDIA SATA support" - depends on ATA && PCI + depends on PCI help This option enables support for NVIDIA Serial ATA. @@ -61,7 +62,7 @@ config SATA_NV config PDC_ADMA tristate "Pacific Digital ADMA support" - depends on ATA && PCI + depends on PCI help This option enables support for Pacific Digital ADMA controllers @@ -69,7 +70,7 @@ config PDC_ADMA config SATA_QSTOR tristate "Pacific Digital SATA QStor support" - depends on ATA && PCI + depends on PCI help This option enables support for Pacific Digital Serial ATA QStor. @@ -77,7 +78,7 @@ config SATA_QSTOR config SATA_PROMISE tristate "Promise SATA TX2/TX4 support" - depends on ATA && PCI + depends on PCI help This option enables support for Promise Serial ATA TX2/TX4. @@ -85,7 +86,7 @@ config SATA_PROMISE config SATA_SX4 tristate "Promise SATA SX4 support" - depends on ATA && PCI && EXPERIMENTAL + depends on PCI && EXPERIMENTAL help This option enables support for Promise Serial ATA SX4. @@ -93,7 +94,7 @@ config SATA_SX4 config SATA_SIL tristate "Silicon Image SATA support" - depends on ATA && PCI + depends on PCI help This option enables support for Silicon Image Serial ATA. @@ -101,7 +102,7 @@ config SATA_SIL config SATA_SIL24 tristate "Silicon Image 3124/3132 SATA support" - depends on ATA && PCI + depends on PCI help This option enables support for Silicon Image 3124/3132 Serial ATA. @@ -109,7 +110,7 @@ config SATA_SIL24 config SATA_SIS tristate "SiS 964/180 SATA support" - depends on ATA && PCI + depends on PCI help This option enables support for SiS Serial ATA 964/180. @@ -117,7 +118,7 @@ config SATA_SIS config SATA_ULI tristate "ULi Electronics SATA support" - depends on ATA && PCI + depends on PCI help This option enables support for ULi Electronics SATA. @@ -125,7 +126,7 @@ config SATA_ULI config SATA_VIA tristate "VIA SATA support" - depends on ATA && PCI + depends on PCI help This option enables support for VIA Serial ATA. @@ -133,7 +134,7 @@ config SATA_VIA config SATA_VITESSE tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" - depends on ATA && PCI + depends on PCI help This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. @@ -144,5 +145,6 @@ config SATA_INTEL_COMBINED depends on IDE=y && !BLK_DEV_IDE_SATA && (SATA_AHCI || ATA_PIIX) default y +endif endmenu -- cgit v1.2.3 From cca3974e48607c3775dc73b544a5700b2e37c21a Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 24 Aug 2006 03:19:22 -0400 Subject: libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 98 +++++++-------- drivers/ata/ata_piix.c | 56 ++++----- drivers/ata/libata-bmdma.c | 34 +++--- drivers/ata/libata-core.c | 292 ++++++++++++++++++++++----------------------- drivers/ata/libata-eh.c | 16 +-- drivers/ata/libata-scsi.c | 78 ++++++------ drivers/ata/libata.h | 2 +- drivers/ata/pdc_adma.c | 46 +++---- drivers/ata/sata_mv.c | 98 ++++++++------- drivers/ata/sata_nv.c | 58 ++++----- drivers/ata/sata_promise.c | 54 ++++----- drivers/ata/sata_qstor.c | 44 +++---- drivers/ata/sata_sil.c | 47 ++++---- drivers/ata/sata_sil24.c | 59 +++++---- drivers/ata/sata_sis.c | 18 +-- drivers/ata/sata_svw.c | 10 +- drivers/ata/sata_sx4.c | 64 +++++----- drivers/ata/sata_uli.c | 8 +- drivers/ata/sata_via.c | 4 +- drivers/ata/sata_vsc.c | 16 +-- 20 files changed, 549 insertions(+), 553 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 813031c01fb..3f1106fdaed 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -277,7 +277,7 @@ static const struct ata_port_info ahci_port_info[] = { /* board_ahci */ { .sht = &ahci_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | ATA_FLAG_SKIP_D2H_BSY, .pio_mask = 0x1f, /* pio0-4 */ @@ -287,7 +287,7 @@ static const struct ata_port_info ahci_port_info[] = { /* board_ahci_vt8251 */ { .sht = &ahci_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | ATA_FLAG_SKIP_D2H_BSY | AHCI_FLAG_RESET_NEEDS_CLO | AHCI_FLAG_NO_NCQ, @@ -709,7 +709,7 @@ static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, static int ahci_clo(struct ata_port *ap) { void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; - struct ahci_host_priv *hpriv = ap->host_set->private_data; + struct ahci_host_priv *hpriv = ap->host->private_data; u32 tmp; if (!(hpriv->cap & HOST_CAP_CLO)) @@ -741,7 +741,7 @@ static int ahci_prereset(struct ata_port *ap) static int ahci_softreset(struct ata_port *ap, unsigned int *class) { struct ahci_port_priv *pp = ap->private_data; - void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *mmio = ap->host->mmio_base; void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); const u32 cmd_fis_len = 5; /* five dwords */ const char *reason = NULL; @@ -850,7 +850,7 @@ static int ahci_hardreset(struct ata_port *ap, unsigned int *class) struct ahci_port_priv *pp = ap->private_data; u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; struct ata_taskfile tf; - void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *mmio = ap->host->mmio_base; void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); int rc; @@ -1039,7 +1039,7 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) static void ahci_host_intr(struct ata_port *ap) { - void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *mmio = ap->host->mmio_base; void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); struct ata_eh_info *ehi = &ap->eh_info; u32 status, qc_active; @@ -1091,7 +1091,7 @@ static void ahci_irq_clear(struct ata_port *ap) static irqreturn_t ahci_interrupt(int irq, void *dev_instance, struct pt_regs *regs) { - struct ata_host_set *host_set = dev_instance; + struct ata_host *host = dev_instance; struct ahci_host_priv *hpriv; unsigned int i, handled = 0; void __iomem *mmio; @@ -1099,8 +1099,8 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance, struct pt_regs *r VPRINTK("ENTER\n"); - hpriv = host_set->private_data; - mmio = host_set->mmio_base; + hpriv = host->private_data; + mmio = host->mmio_base; /* sigh. 0xffffffff is a valid return from h/w */ irq_stat = readl(mmio + HOST_IRQ_STAT); @@ -1108,22 +1108,22 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance, struct pt_regs *r if (!irq_stat) return IRQ_NONE; - spin_lock(&host_set->lock); + spin_lock(&host->lock); - for (i = 0; i < host_set->n_ports; i++) { + for (i = 0; i < host->n_ports; i++) { struct ata_port *ap; if (!(irq_stat & (1 << i))) continue; - ap = host_set->ports[i]; + ap = host->ports[i]; if (ap) { ahci_host_intr(ap); VPRINTK("port %u\n", i); } else { VPRINTK("port %u (no irq)\n", i); if (ata_ratelimit()) - dev_printk(KERN_WARNING, host_set->dev, + dev_printk(KERN_WARNING, host->dev, "interrupt on disabled port %u\n", i); } @@ -1135,7 +1135,7 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance, struct pt_regs *r handled = 1; } - spin_unlock(&host_set->lock); + spin_unlock(&host->lock); VPRINTK("EXIT\n"); @@ -1157,7 +1157,7 @@ static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) static void ahci_freeze(struct ata_port *ap) { - void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *mmio = ap->host->mmio_base; void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); /* turn IRQ off */ @@ -1166,7 +1166,7 @@ static void ahci_freeze(struct ata_port *ap) static void ahci_thaw(struct ata_port *ap) { - void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *mmio = ap->host->mmio_base; void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); u32 tmp; @@ -1181,7 +1181,7 @@ static void ahci_thaw(struct ata_port *ap) static void ahci_error_handler(struct ata_port *ap) { - void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *mmio = ap->host->mmio_base; void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); if (!(ap->pflags & ATA_PFLAG_FROZEN)) { @@ -1198,7 +1198,7 @@ static void ahci_error_handler(struct ata_port *ap) static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *mmio = ap->host->mmio_base; void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); if (qc->flags & ATA_QCFLAG_FAILED) @@ -1213,9 +1213,9 @@ static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg) { - struct ahci_host_priv *hpriv = ap->host_set->private_data; + struct ahci_host_priv *hpriv = ap->host->private_data; struct ahci_port_priv *pp = ap->private_data; - void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *mmio = ap->host->mmio_base; void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); const char *emsg = NULL; int rc; @@ -1233,8 +1233,8 @@ static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg) static int ahci_port_resume(struct ata_port *ap) { struct ahci_port_priv *pp = ap->private_data; - struct ahci_host_priv *hpriv = ap->host_set->private_data; - void __iomem *mmio = ap->host_set->mmio_base; + struct ahci_host_priv *hpriv = ap->host->private_data; + void __iomem *mmio = ap->host->mmio_base; void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); ahci_init_port(port_mmio, hpriv->cap, pp->cmd_slot_dma, pp->rx_fis_dma); @@ -1244,8 +1244,8 @@ static int ahci_port_resume(struct ata_port *ap) static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) { - struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); - void __iomem *mmio = host_set->mmio_base; + struct ata_host *host = dev_get_drvdata(&pdev->dev); + void __iomem *mmio = host->mmio_base; u32 ctl; if (mesg.event == PM_EVENT_SUSPEND) { @@ -1264,9 +1264,9 @@ static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) static int ahci_pci_device_resume(struct pci_dev *pdev) { - struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); - struct ahci_host_priv *hpriv = host_set->private_data; - void __iomem *mmio = host_set->mmio_base; + struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct ahci_host_priv *hpriv = host->private_data; + void __iomem *mmio = host->mmio_base; int rc; ata_pci_device_do_resume(pdev); @@ -1276,20 +1276,20 @@ static int ahci_pci_device_resume(struct pci_dev *pdev) if (rc) return rc; - ahci_init_controller(mmio, pdev, host_set->n_ports, hpriv->cap); + ahci_init_controller(mmio, pdev, host->n_ports, hpriv->cap); } - ata_host_set_resume(host_set); + ata_host_resume(host); return 0; } static int ahci_port_start(struct ata_port *ap) { - struct device *dev = ap->host_set->dev; - struct ahci_host_priv *hpriv = ap->host_set->private_data; + struct device *dev = ap->host->dev; + struct ahci_host_priv *hpriv = ap->host->private_data; struct ahci_port_priv *pp; - void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *mmio = ap->host->mmio_base; void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); void *mem; dma_addr_t mem_dma; @@ -1350,10 +1350,10 @@ static int ahci_port_start(struct ata_port *ap) static void ahci_port_stop(struct ata_port *ap) { - struct device *dev = ap->host_set->dev; - struct ahci_host_priv *hpriv = ap->host_set->private_data; + struct device *dev = ap->host->dev; + struct ahci_host_priv *hpriv = ap->host->private_data; struct ahci_port_priv *pp = ap->private_data; - void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *mmio = ap->host->mmio_base; void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); const char *emsg = NULL; int rc; @@ -1581,7 +1581,7 @@ static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) memset(hpriv, 0, sizeof(*hpriv)); probe_ent->sht = ahci_port_info[board_idx].sht; - probe_ent->host_flags = ahci_port_info[board_idx].host_flags; + probe_ent->port_flags = ahci_port_info[board_idx].flags; probe_ent->pio_mask = ahci_port_info[board_idx].pio_mask; probe_ent->udma_mask = ahci_port_info[board_idx].udma_mask; probe_ent->port_ops = ahci_port_info[board_idx].port_ops; @@ -1599,9 +1599,9 @@ static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) goto err_out_hpriv; - if (!(probe_ent->host_flags & AHCI_FLAG_NO_NCQ) && + if (!(probe_ent->port_flags & AHCI_FLAG_NO_NCQ) && (hpriv->cap & HOST_CAP_NCQ)) - probe_ent->host_flags |= ATA_FLAG_NCQ; + probe_ent->port_flags |= ATA_FLAG_NCQ; ahci_print_info(probe_ent); @@ -1632,27 +1632,27 @@ err_out: static void ahci_remove_one (struct pci_dev *pdev) { struct device *dev = pci_dev_to_dev(pdev); - struct ata_host_set *host_set = dev_get_drvdata(dev); - struct ahci_host_priv *hpriv = host_set->private_data; + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; unsigned int i; int have_msi; - for (i = 0; i < host_set->n_ports; i++) - ata_port_detach(host_set->ports[i]); + for (i = 0; i < host->n_ports; i++) + ata_port_detach(host->ports[i]); have_msi = hpriv->flags & AHCI_FLAG_MSI; - free_irq(host_set->irq, host_set); + free_irq(host->irq, host); - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; - ata_scsi_release(ap->host); - scsi_host_put(ap->host); + ata_scsi_release(ap->scsi_host); + scsi_host_put(ap->scsi_host); } kfree(hpriv); - pci_iounmap(pdev, host_set->mmio_base); - kfree(host_set); + pci_iounmap(pdev, host->mmio_base); + kfree(host); if (have_msi) pci_disable_msi(pdev); diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 0ca4c3b78dc..22b2dba90b9 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -151,7 +151,7 @@ struct piix_host_priv { static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static void piix_host_stop(struct ata_host_set *host_set); +static void piix_host_stop(struct ata_host *host); static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev); static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev); static void piix_pata_error_handler(struct ata_port *ap); @@ -362,7 +362,7 @@ static struct ata_port_info piix_port_info[] = { /* piix4_pata */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SLAVE_POSS, + .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, /* pio0-4 */ #if 0 .mwdma_mask = 0x06, /* mwdma1-2 */ @@ -376,7 +376,7 @@ static struct ata_port_info piix_port_info[] = { /* ich5_pata */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SLAVE_POSS | PIIX_FLAG_CHECKINTR, + .flags = ATA_FLAG_SLAVE_POSS | PIIX_FLAG_CHECKINTR, .pio_mask = 0x1f, /* pio0-4 */ #if 0 .mwdma_mask = 0x06, /* mwdma1-2 */ @@ -390,7 +390,7 @@ static struct ata_port_info piix_port_info[] = { /* ich5_sata */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | + .flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | PIIX_FLAG_IGNORE_PCS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -401,7 +401,7 @@ static struct ata_port_info piix_port_info[] = { /* i6300esb_sata */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | + .flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | PIIX_FLAG_IGNORE_PCS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -412,7 +412,7 @@ static struct ata_port_info piix_port_info[] = { /* ich6_sata */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | + .flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -423,7 +423,7 @@ static struct ata_port_info piix_port_info[] = { /* ich6_sata_ahci */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | + .flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ @@ -435,7 +435,7 @@ static struct ata_port_info piix_port_info[] = { /* ich6m_sata_ahci */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | + .flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ @@ -447,7 +447,7 @@ static struct ata_port_info piix_port_info[] = { /* ich8_sata_ahci */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | + .flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ @@ -485,7 +485,7 @@ MODULE_PARM_DESC(force_pcs, "force honoring or ignoring PCS to work around " */ static void piix_pata_cbl_detect(struct ata_port *ap) { - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); u8 tmp, mask; /* no 80c support in host controller? */ @@ -517,7 +517,7 @@ cbl40: */ static int piix_pata_prereset(struct ata_port *ap) { - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no])) { ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n"); @@ -551,8 +551,8 @@ static void piix_pata_error_handler(struct ata_port *ap) */ static unsigned int piix_sata_present_mask(struct ata_port *ap) { - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - struct piix_host_priv *hpriv = ap->host_set->private_data; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct piix_host_priv *hpriv = ap->host->private_data; const unsigned int *map = hpriv->map; int base = 2 * ap->port_no; unsigned int present_mask = 0; @@ -631,7 +631,7 @@ static void piix_sata_error_handler(struct ata_port *ap) static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev) { unsigned int pio = adev->pio_mode - XFER_PIO_0; - struct pci_dev *dev = to_pci_dev(ap->host_set->dev); + struct pci_dev *dev = to_pci_dev(ap->host->dev); unsigned int is_slave = (adev->devno != 0); unsigned int master_port= ap->port_no ? 0x42 : 0x40; unsigned int slave_port = 0x44; @@ -683,7 +683,7 @@ static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev) static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev) { unsigned int udma = adev->dma_mode; /* FIXME: MWDMA too */ - struct pci_dev *dev = to_pci_dev(ap->host_set->dev); + struct pci_dev *dev = to_pci_dev(ap->host->dev); u8 maslave = ap->port_no ? 0x42 : 0x40; u8 speed = udma; unsigned int drive_dn = (ap->port_no ? 2 : 0) + adev->devno; @@ -835,13 +835,13 @@ static void __devinit piix_init_pcs(struct pci_dev *pdev, if (force_pcs == 1) { dev_printk(KERN_INFO, &pdev->dev, "force ignoring PCS (0x%x)\n", new_pcs); - pinfo[0].host_flags |= PIIX_FLAG_IGNORE_PCS; - pinfo[1].host_flags |= PIIX_FLAG_IGNORE_PCS; + pinfo[0].flags |= PIIX_FLAG_IGNORE_PCS; + pinfo[1].flags |= PIIX_FLAG_IGNORE_PCS; } else if (force_pcs == 2) { dev_printk(KERN_INFO, &pdev->dev, "force honoring PCS (0x%x)\n", new_pcs); - pinfo[0].host_flags &= ~PIIX_FLAG_IGNORE_PCS; - pinfo[1].host_flags &= ~PIIX_FLAG_IGNORE_PCS; + pinfo[0].flags &= ~PIIX_FLAG_IGNORE_PCS; + pinfo[1].flags &= ~PIIX_FLAG_IGNORE_PCS; } } @@ -881,7 +881,7 @@ static void __devinit piix_init_sata_map(struct pci_dev *pdev, default: printk(" P%d", map[i]); if (i & 1) - pinfo[i / 2].host_flags |= ATA_FLAG_SLAVE_POSS; + pinfo[i / 2].flags |= ATA_FLAG_SLAVE_POSS; break; } } @@ -916,7 +916,7 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) struct ata_port_info port_info[2]; struct ata_port_info *ppinfo[2] = { &port_info[0], &port_info[1] }; struct piix_host_priv *hpriv; - unsigned long host_flags; + unsigned long port_flags; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, @@ -935,9 +935,9 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) port_info[0].private_data = hpriv; port_info[1].private_data = hpriv; - host_flags = port_info[0].host_flags; + port_flags = port_info[0].flags; - if (host_flags & PIIX_FLAG_AHCI) { + if (port_flags & PIIX_FLAG_AHCI) { u8 tmp; pci_read_config_byte(pdev, PIIX_SCC, &tmp); if (tmp == PIIX_AHCI_DEVICE) { @@ -948,7 +948,7 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) } /* Initialize SATA map */ - if (host_flags & ATA_FLAG_SATA) { + if (port_flags & ATA_FLAG_SATA) { piix_init_sata_map(pdev, port_info, piix_map_db_table[ent->driver_data]); piix_init_pcs(pdev, port_info, @@ -961,7 +961,7 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) * MSI is disabled (and it is disabled, as we don't use * message-signalled interrupts currently). */ - if (host_flags & PIIX_FLAG_CHECKINTR) + if (port_flags & PIIX_FLAG_CHECKINTR) pci_intx(pdev, 1); if (piix_check_450nx_errata(pdev)) { @@ -976,11 +976,11 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) return ata_pci_init_one(pdev, ppinfo, 2); } -static void piix_host_stop(struct ata_host_set *host_set) +static void piix_host_stop(struct ata_host *host) { - struct piix_host_priv *hpriv = host_set->private_data; + struct piix_host_priv *hpriv = host->private_data; - ata_host_stop(host_set); + ata_host_stop(host); kfree(hpriv); } diff --git a/drivers/ata/libata-bmdma.c b/drivers/ata/libata-bmdma.c index 158f62dbf21..76050285982 100644 --- a/drivers/ata/libata-bmdma.c +++ b/drivers/ata/libata-bmdma.c @@ -193,7 +193,7 @@ void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) * synchronization with interrupt handler / other threads. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf) @@ -216,7 +216,7 @@ static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile * FIXME: missing write posting for 400nS delay enforcement * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) @@ -237,7 +237,7 @@ static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile * synchronization with interrupt handler / other threads. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) { @@ -422,7 +422,7 @@ u8 ata_altstatus(struct ata_port *ap) * @qc: Info associated with this ATA transaction. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ static void ata_bmdma_setup_mmio (struct ata_queued_cmd *qc) @@ -452,7 +452,7 @@ static void ata_bmdma_setup_mmio (struct ata_queued_cmd *qc) * @qc: Info associated with this ATA transaction. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ static void ata_bmdma_start_mmio (struct ata_queued_cmd *qc) @@ -483,7 +483,7 @@ static void ata_bmdma_start_mmio (struct ata_queued_cmd *qc) * @qc: Info associated with this ATA transaction. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ static void ata_bmdma_setup_pio (struct ata_queued_cmd *qc) @@ -511,7 +511,7 @@ static void ata_bmdma_setup_pio (struct ata_queued_cmd *qc) * @qc: Info associated with this ATA transaction. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ static void ata_bmdma_start_pio (struct ata_queued_cmd *qc) @@ -535,7 +535,7 @@ static void ata_bmdma_start_pio (struct ata_queued_cmd *qc) * May be used as the bmdma_start() entry in ata_port_operations. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_bmdma_start(struct ata_queued_cmd *qc) { @@ -557,7 +557,7 @@ void ata_bmdma_start(struct ata_queued_cmd *qc) * May be used as the bmdma_setup() entry in ata_port_operations. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_bmdma_setup(struct ata_queued_cmd *qc) { @@ -577,7 +577,7 @@ void ata_bmdma_setup(struct ata_queued_cmd *qc) * May be used as the irq_clear() entry in ata_port_operations. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_bmdma_irq_clear(struct ata_port *ap) @@ -605,7 +605,7 @@ void ata_bmdma_irq_clear(struct ata_port *ap) * May be used as the bmdma_status() entry in ata_port_operations. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ u8 ata_bmdma_status(struct ata_port *ap) @@ -629,7 +629,7 @@ u8 ata_bmdma_status(struct ata_port *ap) * May be used as the bmdma_stop() entry in ata_port_operations. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_bmdma_stop(struct ata_queued_cmd *qc) @@ -838,7 +838,7 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int bmdma = pci_resource_start(pdev, 4); if (bmdma) { if (inb(bmdma + 2) & 0x80) - probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; + probe_ent->_host_flags |= ATA_HOST_SIMPLEX; probe_ent->port[p].bmdma_addr = bmdma; } ata_std_ports(&probe_ent->port[p]); @@ -854,7 +854,7 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int if (bmdma) { bmdma += 8; if(inb(bmdma + 2) & 0x80) - probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; + probe_ent->_host_flags |= ATA_HOST_SIMPLEX; probe_ent->port[p].bmdma_addr = bmdma; } ata_std_ports(&probe_ent->port[p]); @@ -887,7 +887,7 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, if (bmdma) { probe_ent->port[0].bmdma_addr = bmdma; if (inb(bmdma + 2) & 0x80) - probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; + probe_ent->_host_flags |= ATA_HOST_SIMPLEX; } ata_std_ports(&probe_ent->port[0]); } else @@ -904,7 +904,7 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, if (bmdma) { probe_ent->port[1].bmdma_addr = bmdma + 8; if (inb(bmdma + 10) & 0x80) - probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; + probe_ent->_host_flags |= ATA_HOST_SIMPLEX; } ata_std_ports(&probe_ent->port[1]); } else @@ -957,7 +957,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, else port[1] = port[0]; - if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0 + if ((port[0]->flags & ATA_FLAG_NO_LEGACY) == 0 && (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { /* TODO: What if one channel is in native mode ... */ pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 9092416a630..1c9315401f7 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1335,7 +1335,7 @@ static void ata_dev_config_ncq(struct ata_device *dev, } if (ap->flags & ATA_FLAG_NCQ) { - hdepth = min(ap->host->can_queue, ATA_MAX_QUEUE - 1); + hdepth = min(ap->scsi_host->can_queue, ATA_MAX_QUEUE - 1); dev->flags |= ATA_DFLAG_NCQ; } @@ -1349,12 +1349,13 @@ static void ata_set_port_max_cmd_len(struct ata_port *ap) { int i; - if (ap->host) { - ap->host->max_cmd_len = 0; + if (ap->scsi_host) { + unsigned int len = 0; + for (i = 0; i < ATA_MAX_DEVICES; i++) - ap->host->max_cmd_len = max_t(unsigned int, - ap->host->max_cmd_len, - ap->device[i].cdb_len); + len = max(len, ap->device[i].cdb_len); + + ap->scsi_host->max_cmd_len = len; } } @@ -1662,7 +1663,7 @@ int ata_bus_probe(struct ata_port *ap) * Modify @ap data structure such that the system * thinks that the entire port is enabled. * - * LOCKING: host_set lock, or some other form of + * LOCKING: host lock, or some other form of * serialization. */ @@ -1800,7 +1801,7 @@ struct ata_device *ata_dev_pair(struct ata_device *adev) * never attempt to probe or communicate with devices * on this port. * - * LOCKING: host_set lock, or some other form of + * LOCKING: host lock, or some other form of * serialization. */ @@ -2258,8 +2259,8 @@ int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) /* Record simplex status. If we selected DMA then the other * host channels are not permitted to do so. */ - if (used_dma && (ap->host_set->flags & ATA_HOST_SIMPLEX)) - ap->host_set->simplex_claimed = 1; + if (used_dma && (ap->host->flags & ATA_HOST_SIMPLEX)) + ap->host->simplex_claimed = 1; /* step5: chip specific finalisation */ if (ap->ops->post_set_mode) @@ -2281,7 +2282,7 @@ int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) * other threads. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ static inline void ata_tf_to_host(struct ata_port *ap, @@ -2445,7 +2446,7 @@ static unsigned int ata_bus_softreset(struct ata_port *ap, * * LOCKING: * PCI/etc. bus probe sem. - * Obtains host_set lock. + * Obtains host lock. * * SIDE EFFECTS: * Sets ATA_FLAG_DISABLED if bus reset fails. @@ -3080,7 +3081,7 @@ static int ata_dma_blacklisted(const struct ata_device *dev) static void ata_dev_xfermask(struct ata_device *dev) { struct ata_port *ap = dev->ap; - struct ata_host_set *hs = ap->host_set; + struct ata_host *host = ap->host; unsigned long xfer_mask; /* controller modes available */ @@ -3114,7 +3115,7 @@ static void ata_dev_xfermask(struct ata_device *dev) "device is on DMA blacklist, disabling DMA\n"); } - if ((hs->flags & ATA_HOST_SIMPLEX) && hs->simplex_claimed) { + if ((host->flags & ATA_HOST_SIMPLEX) && host->simplex_claimed) { xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); ata_dev_printk(dev, KERN_WARNING, "simplex DMA is claimed by " "other device, disabling DMA\n"); @@ -3207,7 +3208,7 @@ static unsigned int ata_dev_init_params(struct ata_device *dev, * Unmap all mapped DMA memory associated with this command. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ static void ata_sg_clean(struct ata_queued_cmd *qc) @@ -3267,7 +3268,7 @@ static void ata_sg_clean(struct ata_queued_cmd *qc) * associated with the current disk command. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * */ static void ata_fill_sg(struct ata_queued_cmd *qc) @@ -3319,7 +3320,7 @@ static void ata_fill_sg(struct ata_queued_cmd *qc) * supplied PACKET command. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: 0 when ATAPI DMA can be used * nonzero otherwise @@ -3341,7 +3342,7 @@ int ata_check_atapi_dma(struct ata_queued_cmd *qc) * Prepare ATA taskfile for submission. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_qc_prep(struct ata_queued_cmd *qc) { @@ -3363,7 +3364,7 @@ void ata_noop_qc_prep(struct ata_queued_cmd *qc) { } * to point to a single memory buffer, @buf of byte length @buflen. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) @@ -3394,7 +3395,7 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) * elements. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, @@ -3413,7 +3414,7 @@ void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, * DMA-map the memory buffer associated with queued_cmd @qc. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Zero on success, negative on error. @@ -3482,7 +3483,7 @@ skip_map: * DMA-map the scatter-gather table associated with queued_cmd @qc. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Zero on success, negative on error. @@ -3991,7 +3992,7 @@ static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *q * Finish @qc which is running on standard HSM. * * LOCKING: - * If @in_wq is zero, spin_lock_irqsave(host_set lock). + * If @in_wq is zero, spin_lock_irqsave(host lock). * Otherwise, none on entry and grabs host lock. */ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) @@ -4003,8 +4004,8 @@ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) if (in_wq) { spin_lock_irqsave(ap->lock, flags); - /* EH might have kicked in while host_set lock - * is released. + /* EH might have kicked in while host lock is + * released. */ qc = ata_qc_from_tag(ap, qc->tag); if (qc) { @@ -4369,7 +4370,7 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev) * in case something prevents using it. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_qc_free(struct ata_queued_cmd *qc) { @@ -4422,7 +4423,7 @@ void __ata_qc_complete(struct ata_queued_cmd *qc) * command has completed, with either an ok or not-ok status. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_qc_complete(struct ata_queued_cmd *qc) { @@ -4485,7 +4486,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc) * and commands are completed accordingly. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Number of completed commands on success, -errno otherwise. @@ -4556,7 +4557,7 @@ static inline int ata_should_dma_map(struct ata_queued_cmd *qc) * writing the taskfile to hardware, starting the command. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_qc_issue(struct ata_queued_cmd *qc) { @@ -4617,7 +4618,7 @@ err: * May be used as the qc_issue() entry in ata_port_operations. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Zero on success, AC_ERR_* mask on failure @@ -4746,7 +4747,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) * handled via polling with interrupts disabled (nIEN bit). * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * One if interrupt was handled, zero if not (shared irq). @@ -4833,14 +4834,14 @@ idle_irq: /** * ata_interrupt - Default ATA host interrupt handler * @irq: irq line (unused) - * @dev_instance: pointer to our ata_host_set information structure + * @dev_instance: pointer to our ata_host information structure * @regs: unused * * Default interrupt handler for PCI IDE devices. Calls * ata_host_intr() for each port that is not disabled. * * LOCKING: - * Obtains host_set lock during operation. + * Obtains host lock during operation. * * RETURNS: * IRQ_NONE or IRQ_HANDLED. @@ -4848,18 +4849,18 @@ idle_irq: irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) { - struct ata_host_set *host_set = dev_instance; + struct ata_host *host = dev_instance; unsigned int i; unsigned int handled = 0; unsigned long flags; /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */ - spin_lock_irqsave(&host_set->lock, flags); + spin_lock_irqsave(&host->lock, flags); - for (i = 0; i < host_set->n_ports; i++) { + for (i = 0; i < host->n_ports; i++) { struct ata_port *ap; - ap = host_set->ports[i]; + ap = host->ports[i]; if (ap && !(ap->flags & ATA_FLAG_DISABLED)) { struct ata_queued_cmd *qc; @@ -4871,7 +4872,7 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) } } - spin_unlock_irqrestore(&host_set->lock, flags); + spin_unlock_irqrestore(&host->lock, flags); return IRQ_RETVAL(handled); } @@ -5036,15 +5037,15 @@ int ata_flush_cache(struct ata_device *dev) return 0; } -static int ata_host_set_request_pm(struct ata_host_set *host_set, - pm_message_t mesg, unsigned int action, - unsigned int ehi_flags, int wait) +static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg, + unsigned int action, unsigned int ehi_flags, + int wait) { unsigned long flags; int i, rc; - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; /* Previous resume operation might still be in * progress. Wait for PM_PENDING to clear. @@ -5084,11 +5085,11 @@ static int ata_host_set_request_pm(struct ata_host_set *host_set, } /** - * ata_host_set_suspend - suspend host_set - * @host_set: host_set to suspend + * ata_host_suspend - suspend host + * @host: host to suspend * @mesg: PM message * - * Suspend @host_set. Actual operation is performed by EH. This + * Suspend @host. Actual operation is performed by EH. This * function requests EH to perform PM operations and waits for EH * to finish. * @@ -5098,11 +5099,11 @@ static int ata_host_set_request_pm(struct ata_host_set *host_set, * RETURNS: * 0 on success, -errno on failure. */ -int ata_host_set_suspend(struct ata_host_set *host_set, pm_message_t mesg) +int ata_host_suspend(struct ata_host *host, pm_message_t mesg) { int i, j, rc; - rc = ata_host_set_request_pm(host_set, mesg, 0, ATA_EHI_QUIET, 1); + rc = ata_host_request_pm(host, mesg, 0, ATA_EHI_QUIET, 1); if (rc) goto fail; @@ -5110,8 +5111,8 @@ int ata_host_set_suspend(struct ata_host_set *host_set, pm_message_t mesg) * This happens if hotplug occurs between completion of device * suspension and here. */ - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; for (j = 0; j < ATA_MAX_DEVICES; j++) { struct ata_device *dev = &ap->device[j]; @@ -5126,30 +5127,30 @@ int ata_host_set_suspend(struct ata_host_set *host_set, pm_message_t mesg) } } - host_set->dev->power.power_state = mesg; + host->dev->power.power_state = mesg; return 0; fail: - ata_host_set_resume(host_set); + ata_host_resume(host); return rc; } /** - * ata_host_set_resume - resume host_set - * @host_set: host_set to resume + * ata_host_resume - resume host + * @host: host to resume * - * Resume @host_set. Actual operation is performed by EH. This + * Resume @host. Actual operation is performed by EH. This * function requests EH to perform PM operations and returns. * Note that all resume operations are performed parallely. * * LOCKING: * Kernel thread context (may sleep). */ -void ata_host_set_resume(struct ata_host_set *host_set) +void ata_host_resume(struct ata_host *host) { - ata_host_set_request_pm(host_set, PMSG_ON, ATA_EH_SOFTRESET, - ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0); - host_set->dev->power.power_state = PMSG_ON; + ata_host_request_pm(host, PMSG_ON, ATA_EH_SOFTRESET, + ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0); + host->dev->power.power_state = PMSG_ON; } /** @@ -5206,10 +5207,10 @@ void ata_port_stop (struct ata_port *ap) ata_pad_free(ap, dev); } -void ata_host_stop (struct ata_host_set *host_set) +void ata_host_stop (struct ata_host *host) { - if (host_set->mmio_base) - iounmap(host_set->mmio_base); + if (host->mmio_base) + iounmap(host->mmio_base); } /** @@ -5231,7 +5232,7 @@ void ata_dev_init(struct ata_device *dev) /* High bits of dev->flags are used to record warm plug * requests which occur asynchronously. Synchronize using - * host_set lock. + * host lock. */ spin_lock_irqsave(ap->lock, flags); dev->flags &= ~ATA_DFLAG_INIT_MASK; @@ -5247,7 +5248,7 @@ void ata_dev_init(struct ata_device *dev) /** * ata_port_init - Initialize an ata_port structure * @ap: Structure to initialize - * @host_set: Collection of hosts to which @ap belongs + * @host: Collection of hosts to which @ap belongs * @ent: Probe information provided by low-level driver * @port_no: Port number associated with this ata_port * @@ -5256,22 +5257,22 @@ void ata_dev_init(struct ata_device *dev) * LOCKING: * Inherited from caller. */ -void ata_port_init(struct ata_port *ap, struct ata_host_set *host_set, +void ata_port_init(struct ata_port *ap, struct ata_host *host, const struct ata_probe_ent *ent, unsigned int port_no) { unsigned int i; - ap->lock = &host_set->lock; + ap->lock = &host->lock; ap->flags = ATA_FLAG_DISABLED; ap->id = ata_unique_id++; ap->ctl = ATA_DEVCTL_OBS; - ap->host_set = host_set; + ap->host = host; ap->dev = ent->dev; ap->port_no = port_no; ap->pio_mask = ent->pio_mask; ap->mwdma_mask = ent->mwdma_mask; ap->udma_mask = ent->udma_mask; - ap->flags |= ent->host_flags; + ap->flags |= ent->port_flags; ap->ops = ent->port_ops; ap->hw_sata_spd_limit = UINT_MAX; ap->active_tag = ATA_TAG_POISON; @@ -5324,7 +5325,7 @@ void ata_port_init(struct ata_port *ap, struct ata_host_set *host_set, */ static void ata_port_init_shost(struct ata_port *ap, struct Scsi_Host *shost) { - ap->host = shost; + ap->scsi_host = shost; shost->unique_id = ap->id; shost->max_id = 16; @@ -5336,7 +5337,7 @@ static void ata_port_init_shost(struct ata_port *ap, struct Scsi_Host *shost) /** * ata_port_add - Attach low-level ATA driver to system * @ent: Information provided by low-level driver - * @host_set: Collections of ports to which we add + * @host: Collections of ports to which we add * @port_no: Port number associated with this host * * Attach low-level ATA driver to system. @@ -5348,7 +5349,7 @@ static void ata_port_init_shost(struct ata_port *ap, struct Scsi_Host *shost) * New ata_port on success, for NULL on error. */ static struct ata_port * ata_port_add(const struct ata_probe_ent *ent, - struct ata_host_set *host_set, + struct ata_host *host, unsigned int port_no) { struct Scsi_Host *shost; @@ -5357,7 +5358,7 @@ static struct ata_port * ata_port_add(const struct ata_probe_ent *ent, DPRINTK("ENTER\n"); if (!ent->port_ops->error_handler && - !(ent->host_flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST))) { + !(ent->port_flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST))) { printk(KERN_ERR "ata%u: no reset mechanism available\n", port_no); return NULL; @@ -5371,32 +5372,31 @@ static struct ata_port * ata_port_add(const struct ata_probe_ent *ent, ap = ata_shost_to_port(shost); - ata_port_init(ap, host_set, ent, port_no); + ata_port_init(ap, host, ent, port_no); ata_port_init_shost(ap, shost); return ap; } /** - * ata_sas_host_init - Initialize a host_set struct - * @host_set: host_set to initialize - * @dev: device host_set is attached to - * @flags: host_set flags - * @ops: port_ops + * ata_sas_host_init - Initialize a host struct + * @host: host to initialize + * @dev: device host is attached to + * @flags: host flags + * @ops: port_ops * * LOCKING: * PCI/etc. bus probe sem. * */ -void ata_host_set_init(struct ata_host_set *host_set, - struct device *dev, unsigned long flags, - const struct ata_port_operations *ops) +void ata_host_init(struct ata_host *host, struct device *dev, + unsigned long flags, const struct ata_port_operations *ops) { - spin_lock_init(&host_set->lock); - host_set->dev = dev; - host_set->flags = flags; - host_set->ops = ops; + spin_lock_init(&host->lock); + host->dev = dev; + host->flags = flags; + host->ops = ops; } /** @@ -5421,34 +5421,34 @@ int ata_device_add(const struct ata_probe_ent *ent) { unsigned int i; struct device *dev = ent->dev; - struct ata_host_set *host_set; + struct ata_host *host; int rc; DPRINTK("ENTER\n"); /* alloc a container for our list of ATA ports (buses) */ - host_set = kzalloc(sizeof(struct ata_host_set) + - (ent->n_ports * sizeof(void *)), GFP_KERNEL); - if (!host_set) + host = kzalloc(sizeof(struct ata_host) + + (ent->n_ports * sizeof(void *)), GFP_KERNEL); + if (!host) return 0; - ata_host_set_init(host_set, dev, ent->host_set_flags, ent->port_ops); - host_set->n_ports = ent->n_ports; - host_set->irq = ent->irq; - host_set->irq2 = ent->irq2; - host_set->mmio_base = ent->mmio_base; - host_set->private_data = ent->private_data; + ata_host_init(host, dev, ent->_host_flags, ent->port_ops); + host->n_ports = ent->n_ports; + host->irq = ent->irq; + host->irq2 = ent->irq2; + host->mmio_base = ent->mmio_base; + host->private_data = ent->private_data; /* register each port bound to this device */ - for (i = 0; i < host_set->n_ports; i++) { + for (i = 0; i < host->n_ports; i++) { struct ata_port *ap; unsigned long xfer_mode_mask; int irq_line = ent->irq; - ap = ata_port_add(ent, host_set, i); + ap = ata_port_add(ent, host, i); if (!ap) goto err_out; - host_set->ports[i] = ap; + host->ports[i] = ap; /* dummy? */ if (ent->dummy_port_mask & (1 << i)) { @@ -5460,8 +5460,8 @@ int ata_device_add(const struct ata_probe_ent *ent) /* start port */ rc = ap->ops->port_start(ap); if (rc) { - host_set->ports[i] = NULL; - scsi_host_put(ap->host); + host->ports[i] = NULL; + scsi_host_put(ap->scsi_host); goto err_out; } @@ -5484,13 +5484,13 @@ int ata_device_add(const struct ata_probe_ent *ent) irq_line); ata_chk_status(ap); - host_set->ops->irq_clear(ap); + host->ops->irq_clear(ap); ata_eh_freeze_port(ap); /* freeze port before requesting IRQ */ } /* obtain irq, that may be shared between channels */ rc = request_irq(ent->irq, ent->port_ops->irq_handler, ent->irq_flags, - DRV_NAME, host_set); + DRV_NAME, host); if (rc) { dev_printk(KERN_ERR, dev, "irq %lu request failed: %d\n", ent->irq, rc); @@ -5504,7 +5504,7 @@ int ata_device_add(const struct ata_probe_ent *ent) BUG_ON(ent->irq == ent->irq2); rc = request_irq(ent->irq2, ent->port_ops->irq_handler, ent->irq_flags, - DRV_NAME, host_set); + DRV_NAME, host); if (rc) { dev_printk(KERN_ERR, dev, "irq %lu request failed: %d\n", ent->irq2, rc); @@ -5514,8 +5514,8 @@ int ata_device_add(const struct ata_probe_ent *ent) /* perform each probe synchronously */ DPRINTK("probe begin\n"); - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; u32 scontrol; int rc; @@ -5526,7 +5526,7 @@ int ata_device_add(const struct ata_probe_ent *ent) } ap->sata_spd_limit = ap->hw_sata_spd_limit; - rc = scsi_add_host(ap->host, dev); + rc = scsi_add_host(ap->scsi_host, dev); if (rc) { ata_port_printk(ap, KERN_ERR, "scsi_add_host failed\n"); /* FIXME: do something useful here */ @@ -5574,29 +5574,29 @@ int ata_device_add(const struct ata_probe_ent *ent) /* probes are done, now scan each port's disk(s) */ DPRINTK("host probe begin\n"); - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; ata_scsi_scan_host(ap); } - dev_set_drvdata(dev, host_set); + dev_set_drvdata(dev, host); VPRINTK("EXIT, returning %u\n", ent->n_ports); return ent->n_ports; /* success */ err_out_free_irq: - free_irq(ent->irq, host_set); + free_irq(ent->irq, host); err_out: - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; if (ap) { ap->ops->port_stop(ap); - scsi_host_put(ap->host); + scsi_host_put(ap->scsi_host); } } - kfree(host_set); + kfree(host); VPRINTK("EXIT, returning 0\n"); return 0; } @@ -5656,12 +5656,12 @@ void ata_port_detach(struct ata_port *ap) skip_eh: /* remove the associated SCSI host */ - scsi_remove_host(ap->host); + scsi_remove_host(ap->scsi_host); } /** - * ata_host_set_remove - PCI layer callback for device removal - * @host_set: ATA host set that was removed + * ata_host_remove - PCI layer callback for device removal + * @host: ATA host set that was removed * * Unregister all objects associated with this host set. Free those * objects. @@ -5670,21 +5670,21 @@ void ata_port_detach(struct ata_port *ap) * Inherited from calling layer (may sleep). */ -void ata_host_set_remove(struct ata_host_set *host_set) +void ata_host_remove(struct ata_host *host) { unsigned int i; - for (i = 0; i < host_set->n_ports; i++) - ata_port_detach(host_set->ports[i]); + for (i = 0; i < host->n_ports; i++) + ata_port_detach(host->ports[i]); - free_irq(host_set->irq, host_set); - if (host_set->irq2) - free_irq(host_set->irq2, host_set); + free_irq(host->irq, host); + if (host->irq2) + free_irq(host->irq2, host); - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; - ata_scsi_release(ap->host); + ata_scsi_release(ap->scsi_host); if ((ap->flags & ATA_FLAG_NO_LEGACY) == 0) { struct ata_ioports *ioaddr = &ap->ioaddr; @@ -5696,13 +5696,13 @@ void ata_host_set_remove(struct ata_host_set *host_set) release_region(ATA_SECONDARY_CMD, 8); } - scsi_host_put(ap->host); + scsi_host_put(ap->scsi_host); } - if (host_set->ops->host_stop) - host_set->ops->host_stop(host_set); + if (host->ops->host_stop) + host->ops->host_stop(host); - kfree(host_set); + kfree(host); } /** @@ -5719,9 +5719,9 @@ void ata_host_set_remove(struct ata_host_set *host_set) * One. */ -int ata_scsi_release(struct Scsi_Host *host) +int ata_scsi_release(struct Scsi_Host *shost) { - struct ata_port *ap = ata_shost_to_port(host); + struct ata_port *ap = ata_shost_to_port(shost); DPRINTK("ENTER\n"); @@ -5748,7 +5748,7 @@ ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port) probe_ent->dev = dev; probe_ent->sht = port->sht; - probe_ent->host_flags = port->host_flags; + probe_ent->port_flags = port->flags; probe_ent->pio_mask = port->pio_mask; probe_ent->mwdma_mask = port->mwdma_mask; probe_ent->udma_mask = port->udma_mask; @@ -5786,11 +5786,11 @@ void ata_std_ports(struct ata_ioports *ioaddr) #ifdef CONFIG_PCI -void ata_pci_host_stop (struct ata_host_set *host_set) +void ata_pci_host_stop (struct ata_host *host) { - struct pci_dev *pdev = to_pci_dev(host_set->dev); + struct pci_dev *pdev = to_pci_dev(host->dev); - pci_iounmap(pdev, host_set->mmio_base); + pci_iounmap(pdev, host->mmio_base); } /** @@ -5810,9 +5810,9 @@ void ata_pci_host_stop (struct ata_host_set *host_set) void ata_pci_remove_one (struct pci_dev *pdev) { struct device *dev = pci_dev_to_dev(pdev); - struct ata_host_set *host_set = dev_get_drvdata(dev); + struct ata_host *host = dev_get_drvdata(dev); - ata_host_set_remove(host_set); + ata_host_remove(host); pci_release_regions(pdev); pci_disable_device(pdev); @@ -5873,10 +5873,10 @@ void ata_pci_device_do_resume(struct pci_dev *pdev) int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) { - struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); + struct ata_host *host = dev_get_drvdata(&pdev->dev); int rc = 0; - rc = ata_host_set_suspend(host_set, mesg); + rc = ata_host_suspend(host, mesg); if (rc) return rc; @@ -5887,10 +5887,10 @@ int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) int ata_pci_device_resume(struct pci_dev *pdev) { - struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); + struct ata_host *host = dev_get_drvdata(&pdev->dev); ata_pci_device_do_resume(pdev); - ata_host_set_resume(host_set); + ata_host_resume(host); return 0; } #endif /* CONFIG_PCI */ @@ -6035,10 +6035,10 @@ EXPORT_SYMBOL_GPL(sata_deb_timing_long); EXPORT_SYMBOL_GPL(ata_dummy_port_ops); EXPORT_SYMBOL_GPL(ata_std_bios_param); EXPORT_SYMBOL_GPL(ata_std_ports); -EXPORT_SYMBOL_GPL(ata_host_set_init); +EXPORT_SYMBOL_GPL(ata_host_init); EXPORT_SYMBOL_GPL(ata_device_add); EXPORT_SYMBOL_GPL(ata_port_detach); -EXPORT_SYMBOL_GPL(ata_host_set_remove); +EXPORT_SYMBOL_GPL(ata_host_remove); EXPORT_SYMBOL_GPL(ata_sg_init); EXPORT_SYMBOL_GPL(ata_sg_init_one); EXPORT_SYMBOL_GPL(ata_hsm_move); @@ -6105,8 +6105,8 @@ EXPORT_SYMBOL_GPL(sata_scr_write); EXPORT_SYMBOL_GPL(sata_scr_write_flush); EXPORT_SYMBOL_GPL(ata_port_online); EXPORT_SYMBOL_GPL(ata_port_offline); -EXPORT_SYMBOL_GPL(ata_host_set_suspend); -EXPORT_SYMBOL_GPL(ata_host_set_resume); +EXPORT_SYMBOL_GPL(ata_host_suspend); +EXPORT_SYMBOL_GPL(ata_host_resume); EXPORT_SYMBOL_GPL(ata_id_string); EXPORT_SYMBOL_GPL(ata_id_c_string); EXPORT_SYMBOL_GPL(ata_scsi_simulate); diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 2c476eee463..b1b510493c2 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -200,7 +200,7 @@ void ata_scsi_error(struct Scsi_Host *host) /* synchronize with port task */ ata_port_flush_task(ap); - /* synchronize with host_set lock and sort out timeouts */ + /* synchronize with host lock and sort out timeouts */ /* For new EH, all qcs are finished in one of three ways - * normal completion, error completion, and SCSI timeout. @@ -377,7 +377,7 @@ void ata_port_wait_eh(struct ata_port *ap) spin_unlock_irqrestore(ap->lock, flags); /* make sure SCSI EH is complete */ - if (scsi_host_in_recovery(ap->host)) { + if (scsi_host_in_recovery(ap->scsi_host)) { msleep(10); goto retry; } @@ -486,7 +486,7 @@ void ata_eng_timeout(struct ata_port *ap) * other commands are drained. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_qc_schedule_eh(struct ata_queued_cmd *qc) { @@ -513,14 +513,14 @@ void ata_qc_schedule_eh(struct ata_queued_cmd *qc) * all commands are drained. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_port_schedule_eh(struct ata_port *ap) { WARN_ON(!ap->ops->error_handler); ap->pflags |= ATA_PFLAG_EH_PENDING; - scsi_schedule_eh(ap->host); + scsi_schedule_eh(ap->scsi_host); DPRINTK("port EH scheduled\n"); } @@ -532,7 +532,7 @@ void ata_port_schedule_eh(struct ata_port *ap) * Abort all active qc's of @ap and schedule EH. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Number of aborted qc's. @@ -575,7 +575,7 @@ int ata_port_abort(struct ata_port *ap) * is frozen. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ static void __ata_port_freeze(struct ata_port *ap) { @@ -596,7 +596,7 @@ static void __ata_port_freeze(struct ata_port *ap) * Abort and freeze @ap. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Number of aborted commands. diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index d168e341366..3986ec8741b 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -321,7 +321,7 @@ int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg) * current command. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Command allocated, or %NULL if none available. @@ -537,7 +537,7 @@ int ata_scsi_device_resume(struct scsi_device *sdev) * format sense blocks. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, u8 *ascq, int verbose) @@ -649,7 +649,7 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, * block. Clear sense key, ASC & ASCQ if there is no error. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc) { @@ -918,7 +918,7 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth) * [See SAT revision 5 at www.t10.org] * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Zero on success, non-zero on error. @@ -986,7 +986,7 @@ invalid_fld: * FLUSH CACHE EXT. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Zero on success, non-zero on error. @@ -1109,7 +1109,7 @@ static void scsi_16_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) * Converts SCSI VERIFY command to an ATA READ VERIFY command. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Zero on success, non-zero on error. @@ -1233,7 +1233,7 @@ nothing_to_do: * %WRITE_16 are currently supported. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Zero on success, non-zero on error. @@ -1467,7 +1467,7 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) * issued to @dev. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * 1 if deferring is needed, 0 otherwise. @@ -1510,7 +1510,7 @@ static int ata_scmd_need_defer(struct ata_device *dev, int is_io) * termination. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * 0 on success, SCSI_ML_QUEUE_DEVICE_BUSY if the command @@ -1589,7 +1589,7 @@ defer: * Maps buffer contained within SCSI command @cmd. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Length of response buffer. @@ -1623,7 +1623,7 @@ static unsigned int ata_scsi_rbuf_get(struct scsi_cmnd *cmd, u8 **buf_out) * Unmaps response buffer contained within @cmd. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ static inline void ata_scsi_rbuf_put(struct scsi_cmnd *cmd, u8 *buf) @@ -1649,7 +1649,7 @@ static inline void ata_scsi_rbuf_put(struct scsi_cmnd *cmd, u8 *buf) * and sense buffer are assumed to be set). * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_scsi_rbuf_fill(struct ata_scsi_args *args, @@ -1680,7 +1680,7 @@ void ata_scsi_rbuf_fill(struct ata_scsi_args *args, * with non-VPD INQUIRY command output. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, @@ -1736,7 +1736,7 @@ unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, * Returns list of inquiry VPD pages available. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf, @@ -1764,7 +1764,7 @@ unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf, * Returns ATA device serial number. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ unsigned int ata_scsiop_inq_80(struct ata_scsi_args *args, u8 *rbuf, @@ -1797,7 +1797,7 @@ unsigned int ata_scsiop_inq_80(struct ata_scsi_args *args, u8 *rbuf, * name ("ATA "), model and serial numbers. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf, @@ -1849,7 +1849,7 @@ unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf, * that the caller should successfully complete this SCSI command. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ unsigned int ata_scsiop_noop(struct ata_scsi_args *args, u8 *rbuf, @@ -1990,7 +1990,7 @@ static int ata_dev_supports_fua(u16 *id) * descriptor for other device types. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, @@ -2129,7 +2129,7 @@ saving_not_supp: * Simulate READ CAPACITY commands. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf, @@ -2204,7 +2204,7 @@ unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf, * Simulate REPORT LUNS command. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, @@ -2256,7 +2256,7 @@ void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq) * and the specified additional sense codes. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq) @@ -2421,7 +2421,7 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc) * @scsicmd: SCSI CDB associated with this PACKET command * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Zero on success, non-zero on failure. @@ -2500,7 +2500,7 @@ static struct ata_device * __ata_scsi_find_dev(struct ata_port *ap, * Determine if commands should be sent to the specified device. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * 0 if commands are not allowed / 1 if commands are allowed @@ -2534,7 +2534,7 @@ static int ata_scsi_dev_enabled(struct ata_device *dev) * SCSI command to be sent. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Associated ATA device, or %NULL if not found. @@ -2808,7 +2808,7 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *cmd, * ATA and ATAPI devices appearing as SCSI devices. * * LOCKING: - * Releases scsi-layer-held lock, and obtains host_set lock. + * Releases scsi-layer-held lock, and obtains host lock. * * RETURNS: * Return value from __ata_scsi_queuecmd() if @cmd can be queued, @@ -2852,7 +2852,7 @@ int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) * that can be handled internally. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, @@ -2944,7 +2944,7 @@ void ata_scsi_scan_host(struct ata_port *ap) if (!ata_dev_enabled(dev) || dev->sdev) continue; - sdev = __scsi_add_device(ap->host, 0, i, 0, NULL); + sdev = __scsi_add_device(ap->scsi_host, 0, i, 0, NULL); if (!IS_ERR(sdev)) { dev->sdev = sdev; scsi_device_put(sdev); @@ -2958,11 +2958,11 @@ void ata_scsi_scan_host(struct ata_port *ap) * * This function is called from ata_eh_hotplug() and responsible * for taking the SCSI device attached to @dev offline. This - * function is called with host_set lock which protects dev->sdev + * function is called with host lock which protects dev->sdev * against clearing. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * 1 if attached SCSI device exists, 0 otherwise. @@ -2998,16 +2998,16 @@ static void ata_scsi_remove_dev(struct ata_device *dev) * be removed if there is __scsi_device_get() interface which * increments reference counts regardless of device state. */ - mutex_lock(&ap->host->scan_mutex); + mutex_lock(&ap->scsi_host->scan_mutex); spin_lock_irqsave(ap->lock, flags); - /* clearing dev->sdev is protected by host_set lock */ + /* clearing dev->sdev is protected by host lock */ sdev = dev->sdev; dev->sdev = NULL; if (sdev) { /* If user initiated unplug races with us, sdev can go - * away underneath us after the host_set lock and + * away underneath us after the host lock and * scan_mutex are released. Hold onto it. */ if (scsi_device_get(sdev) == 0) { @@ -3024,7 +3024,7 @@ static void ata_scsi_remove_dev(struct ata_device *dev) } spin_unlock_irqrestore(ap->lock, flags); - mutex_unlock(&ap->host->scan_mutex); + mutex_unlock(&ap->scsi_host->scan_mutex); if (sdev) { ata_dev_printk(dev, KERN_INFO, "detaching (SCSI %s)\n", @@ -3176,7 +3176,7 @@ void ata_scsi_dev_rescan(void *data) * ata_sas_port_alloc - Allocate port for a SAS attached SATA device * @pdev: PCI device that the scsi device is attached to * @port_info: Information from low-level host driver - * @host: SCSI host that the scsi device is attached to + * @shost: SCSI host that the scsi device is attached to * * LOCKING: * PCI/etc. bus probe sem. @@ -3185,9 +3185,9 @@ void ata_scsi_dev_rescan(void *data) * ata_port pointer on success / NULL on failure. */ -struct ata_port *ata_sas_port_alloc(struct ata_host_set *host_set, +struct ata_port *ata_sas_port_alloc(struct ata_host *host, struct ata_port_info *port_info, - struct Scsi_Host *host) + struct Scsi_Host *shost) { struct ata_port *ap = kzalloc(sizeof(*ap), GFP_KERNEL); struct ata_probe_ent *ent; @@ -3195,14 +3195,14 @@ struct ata_port *ata_sas_port_alloc(struct ata_host_set *host_set, if (!ap) return NULL; - ent = ata_probe_ent_alloc(host_set->dev, port_info); + ent = ata_probe_ent_alloc(host->dev, port_info); if (!ent) { kfree(ap); return NULL; } - ata_port_init(ap, host_set, ent, 0); - ap->lock = host->host_lock; + ata_port_init(ap, host, ent, 0); + ap->lock = shost->host_lock; kfree(ent); return ap; } diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index d4a4f82360e..a5ecb71390a 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -69,7 +69,7 @@ extern int ata_flush_cache(struct ata_device *dev); extern void ata_dev_init(struct ata_device *dev); extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg); extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg); -extern void ata_port_init(struct ata_port *ap, struct ata_host_set *host_set, +extern void ata_port_init(struct ata_port *ap, struct ata_host *host, const struct ata_probe_ent *ent, unsigned int port_no); extern struct ata_probe_ent *ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port); diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c index 61d2aa697b4..912211ada81 100644 --- a/drivers/ata/pdc_adma.c +++ b/drivers/ata/pdc_adma.c @@ -127,7 +127,7 @@ static int adma_ata_init_one (struct pci_dev *pdev, static irqreturn_t adma_intr (int irq, void *dev_instance, struct pt_regs *regs); static int adma_port_start(struct ata_port *ap); -static void adma_host_stop(struct ata_host_set *host_set); +static void adma_host_stop(struct ata_host *host); static void adma_port_stop(struct ata_port *ap); static void adma_phy_reset(struct ata_port *ap); static void adma_qc_prep(struct ata_queued_cmd *qc); @@ -182,7 +182,7 @@ static struct ata_port_info adma_port_info[] = { /* board_1841_idx */ { .sht = &adma_ata_sht, - .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING, .pio_mask = 0x10, /* pio4 */ @@ -237,7 +237,7 @@ static void adma_reset_engine(void __iomem *chan) static void adma_reinit_engine(struct ata_port *ap) { struct adma_port_priv *pp = ap->private_data; - void __iomem *mmio_base = ap->host_set->mmio_base; + void __iomem *mmio_base = ap->host->mmio_base; void __iomem *chan = ADMA_REGS(mmio_base, ap->port_no); /* mask/clear ATA interrupts */ @@ -265,7 +265,7 @@ static void adma_reinit_engine(struct ata_port *ap) static inline void adma_enter_reg_mode(struct ata_port *ap) { - void __iomem *chan = ADMA_REGS(ap->host_set->mmio_base, ap->port_no); + void __iomem *chan = ADMA_REGS(ap->host->mmio_base, ap->port_no); writew(aPIOMD4, chan + ADMA_CONTROL); readb(chan + ADMA_STATUS); /* flush */ @@ -412,7 +412,7 @@ static void adma_qc_prep(struct ata_queued_cmd *qc) static inline void adma_packet_start(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - void __iomem *chan = ADMA_REGS(ap->host_set->mmio_base, ap->port_no); + void __iomem *chan = ADMA_REGS(ap->host->mmio_base, ap->port_no); VPRINTK("ENTER, ap %p\n", ap); @@ -442,13 +442,13 @@ static unsigned int adma_qc_issue(struct ata_queued_cmd *qc) return ata_qc_issue_prot(qc); } -static inline unsigned int adma_intr_pkt(struct ata_host_set *host_set) +static inline unsigned int adma_intr_pkt(struct ata_host *host) { unsigned int handled = 0, port_no; - u8 __iomem *mmio_base = host_set->mmio_base; + u8 __iomem *mmio_base = host->mmio_base; - for (port_no = 0; port_no < host_set->n_ports; ++port_no) { - struct ata_port *ap = host_set->ports[port_no]; + for (port_no = 0; port_no < host->n_ports; ++port_no) { + struct ata_port *ap = host->ports[port_no]; struct adma_port_priv *pp; struct ata_queued_cmd *qc; void __iomem *chan = ADMA_REGS(mmio_base, port_no); @@ -476,13 +476,13 @@ static inline unsigned int adma_intr_pkt(struct ata_host_set *host_set) return handled; } -static inline unsigned int adma_intr_mmio(struct ata_host_set *host_set) +static inline unsigned int adma_intr_mmio(struct ata_host *host) { unsigned int handled = 0, port_no; - for (port_no = 0; port_no < host_set->n_ports; ++port_no) { + for (port_no = 0; port_no < host->n_ports; ++port_no) { struct ata_port *ap; - ap = host_set->ports[port_no]; + ap = host->ports[port_no]; if (ap && (!(ap->flags & ATA_FLAG_DISABLED))) { struct ata_queued_cmd *qc; struct adma_port_priv *pp = ap->private_data; @@ -511,14 +511,14 @@ static inline unsigned int adma_intr_mmio(struct ata_host_set *host_set) static irqreturn_t adma_intr(int irq, void *dev_instance, struct pt_regs *regs) { - struct ata_host_set *host_set = dev_instance; + struct ata_host *host = dev_instance; unsigned int handled = 0; VPRINTK("ENTER\n"); - spin_lock(&host_set->lock); - handled = adma_intr_pkt(host_set) | adma_intr_mmio(host_set); - spin_unlock(&host_set->lock); + spin_lock(&host->lock); + handled = adma_intr_pkt(host) | adma_intr_mmio(host); + spin_unlock(&host->lock); VPRINTK("EXIT\n"); @@ -544,7 +544,7 @@ static void adma_ata_setup_port(struct ata_ioports *port, unsigned long base) static int adma_port_start(struct ata_port *ap) { - struct device *dev = ap->host_set->dev; + struct device *dev = ap->host->dev; struct adma_port_priv *pp; int rc; @@ -582,10 +582,10 @@ err_out: static void adma_port_stop(struct ata_port *ap) { - struct device *dev = ap->host_set->dev; + struct device *dev = ap->host->dev; struct adma_port_priv *pp = ap->private_data; - adma_reset_engine(ADMA_REGS(ap->host_set->mmio_base, ap->port_no)); + adma_reset_engine(ADMA_REGS(ap->host->mmio_base, ap->port_no)); if (pp != NULL) { ap->private_data = NULL; if (pp->pkt != NULL) @@ -596,14 +596,14 @@ static void adma_port_stop(struct ata_port *ap) ata_port_stop(ap); } -static void adma_host_stop(struct ata_host_set *host_set) +static void adma_host_stop(struct ata_host *host) { unsigned int port_no; for (port_no = 0; port_no < ADMA_PORTS; ++port_no) - adma_reset_engine(ADMA_REGS(host_set->mmio_base, port_no)); + adma_reset_engine(ADMA_REGS(host->mmio_base, port_no)); - ata_pci_host_stop(host_set); + ata_pci_host_stop(host); } static void adma_host_init(unsigned int chip_id, @@ -684,7 +684,7 @@ static int adma_ata_init_one(struct pci_dev *pdev, INIT_LIST_HEAD(&probe_ent->node); probe_ent->sht = adma_port_info[board_idx].sht; - probe_ent->host_flags = adma_port_info[board_idx].host_flags; + probe_ent->port_flags = adma_port_info[board_idx].flags; probe_ent->pio_mask = adma_port_info[board_idx].pio_mask; probe_ent->mwdma_mask = adma_port_info[board_idx].mwdma_mask; probe_ent->udma_mask = adma_port_info[board_idx].udma_mask; diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index a2915a56acc..34f1939b44c 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -342,7 +342,7 @@ static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in); static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val); static void mv_phy_reset(struct ata_port *ap); static void __mv_phy_reset(struct ata_port *ap, int can_sleep); -static void mv_host_stop(struct ata_host_set *host_set); +static void mv_host_stop(struct ata_host *host); static int mv_port_start(struct ata_port *ap); static void mv_port_stop(struct ata_port *ap); static void mv_qc_prep(struct ata_queued_cmd *qc); @@ -480,35 +480,35 @@ static const struct ata_port_operations mv_iie_ops = { static const struct ata_port_info mv_port_info[] = { { /* chip_504x */ .sht = &mv_sht, - .host_flags = MV_COMMON_FLAGS, + .flags = MV_COMMON_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &mv5_ops, }, { /* chip_508x */ .sht = &mv_sht, - .host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC), + .flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC), .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &mv5_ops, }, { /* chip_5080 */ .sht = &mv_sht, - .host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC), + .flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC), .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &mv5_ops, }, { /* chip_604x */ .sht = &mv_sht, - .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), + .flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &mv6_ops, }, { /* chip_608x */ .sht = &mv_sht, - .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | + .flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | MV_FLAG_DUAL_HC), .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 */ @@ -516,14 +516,14 @@ static const struct ata_port_info mv_port_info[] = { }, { /* chip_6042 */ .sht = &mv_sht, - .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), + .flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &mv_iie_ops, }, { /* chip_7042 */ .sht = &mv_sht, - .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | + .flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | MV_FLAG_DUAL_HC), .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 */ @@ -618,12 +618,12 @@ static inline void __iomem *mv_port_base(void __iomem *base, unsigned int port) static inline void __iomem *mv_ap_base(struct ata_port *ap) { - return mv_port_base(ap->host_set->mmio_base, ap->port_no); + return mv_port_base(ap->host->mmio_base, ap->port_no); } -static inline int mv_get_hc_count(unsigned long host_flags) +static inline int mv_get_hc_count(unsigned long port_flags) { - return ((host_flags & MV_FLAG_DUAL_HC) ? 2 : 1); + return ((port_flags & MV_FLAG_DUAL_HC) ? 2 : 1); } static void mv_irq_clear(struct ata_port *ap) @@ -809,7 +809,7 @@ static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) /** * mv_host_stop - Host specific cleanup/stop routine. - * @host_set: host data structure + * @host: host data structure * * Disable ints, cleanup host memory, call general purpose * host_stop. @@ -817,10 +817,10 @@ static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) * LOCKING: * Inherited from caller. */ -static void mv_host_stop(struct ata_host_set *host_set) +static void mv_host_stop(struct ata_host *host) { - struct mv_host_priv *hpriv = host_set->private_data; - struct pci_dev *pdev = to_pci_dev(host_set->dev); + struct mv_host_priv *hpriv = host->private_data; + struct pci_dev *pdev = to_pci_dev(host->dev); if (hpriv->hp_flags & MV_HP_FLAG_MSI) { pci_disable_msi(pdev); @@ -828,7 +828,7 @@ static void mv_host_stop(struct ata_host_set *host_set) pci_intx(pdev, 0); } kfree(hpriv); - ata_host_stop(host_set); + ata_host_stop(host); } static inline void mv_priv_free(struct mv_port_priv *pp, struct device *dev) @@ -875,8 +875,8 @@ static void mv_edma_cfg(struct mv_host_priv *hpriv, void __iomem *port_mmio) */ static int mv_port_start(struct ata_port *ap) { - struct device *dev = ap->host_set->dev; - struct mv_host_priv *hpriv = ap->host_set->private_data; + struct device *dev = ap->host->dev; + struct mv_host_priv *hpriv = ap->host->private_data; struct mv_port_priv *pp; void __iomem *port_mmio = mv_ap_base(ap); void *mem; @@ -965,17 +965,17 @@ err_out: * Stop DMA, cleanup port memory. * * LOCKING: - * This routine uses the host_set lock to protect the DMA stop. + * This routine uses the host lock to protect the DMA stop. */ static void mv_port_stop(struct ata_port *ap) { - struct device *dev = ap->host_set->dev; + struct device *dev = ap->host->dev; struct mv_port_priv *pp = ap->private_data; unsigned long flags; - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(&ap->host->lock, flags); mv_stop_dma(ap); - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(&ap->host->lock, flags); ap->private_data = NULL; ata_pad_free(ap, dev); @@ -1330,7 +1330,7 @@ static void mv_err_intr(struct ata_port *ap, int reset_allowed) /** * mv_host_intr - Handle all interrupts on the given host controller - * @host_set: host specific structure + * @host: host specific structure * @relevant: port error bits relevant to this host controller * @hc: which host controller we're to look at * @@ -1344,10 +1344,9 @@ static void mv_err_intr(struct ata_port *ap, int reset_allowed) * LOCKING: * Inherited from caller. */ -static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, - unsigned int hc) +static void mv_host_intr(struct ata_host *host, u32 relevant, unsigned int hc) { - void __iomem *mmio = host_set->mmio_base; + void __iomem *mmio = host->mmio_base; void __iomem *hc_mmio = mv_hc_base(mmio, hc); struct ata_queued_cmd *qc; u32 hc_irq_cause; @@ -1371,7 +1370,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) { u8 ata_status = 0; - struct ata_port *ap = host_set->ports[port]; + struct ata_port *ap = host->ports[port]; struct mv_port_priv *pp = ap->private_data; hard_port = mv_hardport_from_port(port); /* range 0..3 */ @@ -1444,15 +1443,15 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, * reported here. * * LOCKING: - * This routine holds the host_set lock while processing pending + * This routine holds the host lock while processing pending * interrupts. */ static irqreturn_t mv_interrupt(int irq, void *dev_instance, struct pt_regs *regs) { - struct ata_host_set *host_set = dev_instance; + struct ata_host *host = dev_instance; unsigned int hc, handled = 0, n_hcs; - void __iomem *mmio = host_set->mmio_base; + void __iomem *mmio = host->mmio_base; struct mv_host_priv *hpriv; u32 irq_stat; @@ -1465,18 +1464,18 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, return IRQ_NONE; } - n_hcs = mv_get_hc_count(host_set->ports[0]->flags); - spin_lock(&host_set->lock); + n_hcs = mv_get_hc_count(host->ports[0]->flags); + spin_lock(&host->lock); for (hc = 0; hc < n_hcs; hc++) { u32 relevant = irq_stat & (HC0_IRQ_PEND << (hc * HC_SHIFT)); if (relevant) { - mv_host_intr(host_set, relevant, hc); + mv_host_intr(host, relevant, hc); handled++; } } - hpriv = host_set->private_data; + hpriv = host->private_data; if (IS_60XX(hpriv)) { /* deal with the interrupt coalescing bits */ if (irq_stat & (TRAN_LO_DONE | TRAN_HI_DONE | PORTS_0_7_COAL_DONE)) { @@ -1491,12 +1490,12 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, readl(mmio + PCI_IRQ_CAUSE_OFS)); DPRINTK("All regs @ PCI error\n"); - mv_dump_all_regs(mmio, -1, to_pci_dev(host_set->dev)); + mv_dump_all_regs(mmio, -1, to_pci_dev(host->dev)); writelfl(0, mmio + PCI_IRQ_CAUSE_OFS); handled++; } - spin_unlock(&host_set->lock); + spin_unlock(&host->lock); return IRQ_RETVAL(handled); } @@ -1528,7 +1527,7 @@ static unsigned int mv5_scr_offset(unsigned int sc_reg_in) static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in) { - void __iomem *mmio = mv5_phy_base(ap->host_set->mmio_base, ap->port_no); + void __iomem *mmio = mv5_phy_base(ap->host->mmio_base, ap->port_no); unsigned int ofs = mv5_scr_offset(sc_reg_in); if (ofs != 0xffffffffU) @@ -1539,7 +1538,7 @@ static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in) static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) { - void __iomem *mmio = mv5_phy_base(ap->host_set->mmio_base, ap->port_no); + void __iomem *mmio = mv5_phy_base(ap->host->mmio_base, ap->port_no); unsigned int ofs = mv5_scr_offset(sc_reg_in); if (ofs != 0xffffffffU) @@ -1904,8 +1903,8 @@ static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio, static void mv_stop_and_reset(struct ata_port *ap) { - struct mv_host_priv *hpriv = ap->host_set->private_data; - void __iomem *mmio = ap->host_set->mmio_base; + struct mv_host_priv *hpriv = ap->host->private_data; + void __iomem *mmio = ap->host->mmio_base; mv_stop_dma(ap); @@ -1936,7 +1935,7 @@ static inline void __msleep(unsigned int msec, int can_sleep) static void __mv_phy_reset(struct ata_port *ap, int can_sleep) { struct mv_port_priv *pp = ap->private_data; - struct mv_host_priv *hpriv = ap->host_set->private_data; + struct mv_host_priv *hpriv = ap->host->private_data; void __iomem *port_mmio = mv_ap_base(ap); struct ata_taskfile tf; struct ata_device *dev = &ap->device[0]; @@ -2035,7 +2034,7 @@ static void mv_phy_reset(struct ata_port *ap) * chip/bus, fail the command, and move on. * * LOCKING: - * This routine holds the host_set lock while failing the command. + * This routine holds the host lock while failing the command. */ static void mv_eng_timeout(struct ata_port *ap) { @@ -2044,18 +2043,17 @@ static void mv_eng_timeout(struct ata_port *ap) ata_port_printk(ap, KERN_ERR, "Entering mv_eng_timeout\n"); DPRINTK("All regs @ start of eng_timeout\n"); - mv_dump_all_regs(ap->host_set->mmio_base, ap->port_no, - to_pci_dev(ap->host_set->dev)); + mv_dump_all_regs(ap->host->mmio_base, ap->port_no, + to_pci_dev(ap->host->dev)); qc = ata_qc_from_tag(ap, ap->active_tag); printk(KERN_ERR "mmio_base %p ap %p qc %p scsi_cmnd %p &cmnd %p\n", - ap->host_set->mmio_base, ap, qc, qc->scsicmd, - &qc->scsicmd->cmnd); + ap->host->mmio_base, ap, qc, qc->scsicmd, &qc->scsicmd->cmnd); - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(&ap->host->lock, flags); mv_err_intr(ap, 0); mv_stop_and_reset(ap); - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(&ap->host->lock, flags); WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); if (qc->flags & ATA_QCFLAG_ACTIVE) { @@ -2236,7 +2234,7 @@ static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent, if (rc) goto done; - n_hc = mv_get_hc_count(probe_ent->host_flags); + n_hc = mv_get_hc_count(probe_ent->port_flags); probe_ent->n_ports = MV_PORTS_PER_HC * n_hc; for (port = 0; port < probe_ent->n_ports; port++) @@ -2389,7 +2387,7 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) memset(hpriv, 0, sizeof(*hpriv)); probe_ent->sht = mv_port_info[board_idx].sht; - probe_ent->host_flags = mv_port_info[board_idx].host_flags; + probe_ent->port_flags = mv_port_info[board_idx].flags; probe_ent->pio_mask = mv_port_info[board_idx].pio_mask; probe_ent->udma_mask = mv_port_info[board_idx].udma_mask; probe_ent->port_ops = mv_port_info[board_idx].port_ops; diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index be46df75ab5..27c22feebf3 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -81,7 +81,7 @@ enum { }; static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static void nv_ck804_host_stop(struct ata_host_set *host_set); +static void nv_ck804_host_stop(struct ata_host *host); static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance, struct pt_regs *regs); static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance, @@ -257,7 +257,7 @@ static struct ata_port_info nv_port_info[] = { /* generic */ { .sht = &nv_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = NV_PIO_MASK, .mwdma_mask = NV_MWDMA_MASK, .udma_mask = NV_UDMA_MASK, @@ -266,7 +266,7 @@ static struct ata_port_info nv_port_info[] = { /* nforce2/3 */ { .sht = &nv_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = NV_PIO_MASK, .mwdma_mask = NV_MWDMA_MASK, .udma_mask = NV_UDMA_MASK, @@ -275,7 +275,7 @@ static struct ata_port_info nv_port_info[] = { /* ck804 */ { .sht = &nv_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = NV_PIO_MASK, .mwdma_mask = NV_MWDMA_MASK, .udma_mask = NV_UDMA_MASK, @@ -292,17 +292,17 @@ MODULE_VERSION(DRV_VERSION); static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance, struct pt_regs *regs) { - struct ata_host_set *host_set = dev_instance; + struct ata_host *host = dev_instance; unsigned int i; unsigned int handled = 0; unsigned long flags; - spin_lock_irqsave(&host_set->lock, flags); + spin_lock_irqsave(&host->lock, flags); - for (i = 0; i < host_set->n_ports; i++) { + for (i = 0; i < host->n_ports; i++) { struct ata_port *ap; - ap = host_set->ports[i]; + ap = host->ports[i]; if (ap && !(ap->flags & ATA_FLAG_DISABLED)) { struct ata_queued_cmd *qc; @@ -318,7 +318,7 @@ static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance, } - spin_unlock_irqrestore(&host_set->lock, flags); + spin_unlock_irqrestore(&host->lock, flags); return IRQ_RETVAL(handled); } @@ -354,12 +354,12 @@ static int nv_host_intr(struct ata_port *ap, u8 irq_stat) return 1; } -static irqreturn_t nv_do_interrupt(struct ata_host_set *host_set, u8 irq_stat) +static irqreturn_t nv_do_interrupt(struct ata_host *host, u8 irq_stat) { int i, handled = 0; - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; if (ap && !(ap->flags & ATA_FLAG_DISABLED)) handled += nv_host_intr(ap, irq_stat); @@ -373,14 +373,14 @@ static irqreturn_t nv_do_interrupt(struct ata_host_set *host_set, u8 irq_stat) static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance, struct pt_regs *regs) { - struct ata_host_set *host_set = dev_instance; + struct ata_host *host = dev_instance; u8 irq_stat; irqreturn_t ret; - spin_lock(&host_set->lock); - irq_stat = inb(host_set->ports[0]->ioaddr.scr_addr + NV_INT_STATUS); - ret = nv_do_interrupt(host_set, irq_stat); - spin_unlock(&host_set->lock); + spin_lock(&host->lock); + irq_stat = inb(host->ports[0]->ioaddr.scr_addr + NV_INT_STATUS); + ret = nv_do_interrupt(host, irq_stat); + spin_unlock(&host->lock); return ret; } @@ -388,14 +388,14 @@ static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance, static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance, struct pt_regs *regs) { - struct ata_host_set *host_set = dev_instance; + struct ata_host *host = dev_instance; u8 irq_stat; irqreturn_t ret; - spin_lock(&host_set->lock); - irq_stat = readb(host_set->mmio_base + NV_INT_STATUS_CK804); - ret = nv_do_interrupt(host_set, irq_stat); - spin_unlock(&host_set->lock); + spin_lock(&host->lock); + irq_stat = readb(host->mmio_base + NV_INT_STATUS_CK804); + ret = nv_do_interrupt(host, irq_stat); + spin_unlock(&host->lock); return ret; } @@ -418,7 +418,7 @@ static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) static void nv_nf2_freeze(struct ata_port *ap) { - unsigned long scr_addr = ap->host_set->ports[0]->ioaddr.scr_addr; + unsigned long scr_addr = ap->host->ports[0]->ioaddr.scr_addr; int shift = ap->port_no * NV_INT_PORT_SHIFT; u8 mask; @@ -429,7 +429,7 @@ static void nv_nf2_freeze(struct ata_port *ap) static void nv_nf2_thaw(struct ata_port *ap) { - unsigned long scr_addr = ap->host_set->ports[0]->ioaddr.scr_addr; + unsigned long scr_addr = ap->host->ports[0]->ioaddr.scr_addr; int shift = ap->port_no * NV_INT_PORT_SHIFT; u8 mask; @@ -442,7 +442,7 @@ static void nv_nf2_thaw(struct ata_port *ap) static void nv_ck804_freeze(struct ata_port *ap) { - void __iomem *mmio_base = ap->host_set->mmio_base; + void __iomem *mmio_base = ap->host->mmio_base; int shift = ap->port_no * NV_INT_PORT_SHIFT; u8 mask; @@ -453,7 +453,7 @@ static void nv_ck804_freeze(struct ata_port *ap) static void nv_ck804_thaw(struct ata_port *ap) { - void __iomem *mmio_base = ap->host_set->mmio_base; + void __iomem *mmio_base = ap->host->mmio_base; int shift = ap->port_no * NV_INT_PORT_SHIFT; u8 mask; @@ -568,9 +568,9 @@ err_out: return rc; } -static void nv_ck804_host_stop(struct ata_host_set *host_set) +static void nv_ck804_host_stop(struct ata_host *host) { - struct pci_dev *pdev = to_pci_dev(host_set->dev); + struct pci_dev *pdev = to_pci_dev(host->dev); u8 regval; /* disable SATA space for CK804 */ @@ -578,7 +578,7 @@ static void nv_ck804_host_stop(struct ata_host_set *host_set) regval &= ~NV_MCP_SATA_CFG_20_SATA_SPACE_EN; pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval); - ata_pci_host_stop(host_set); + ata_pci_host_stop(host); } static int __init nv_init(void) diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index a5b3a7db7a9..d627812ea73 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -104,7 +104,7 @@ static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf); static void pdc_irq_clear(struct ata_port *ap); static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc); -static void pdc_host_stop(struct ata_host_set *host_set); +static void pdc_host_stop(struct ata_host *host); static struct scsi_host_template pdc_ata_sht = { @@ -175,7 +175,7 @@ static const struct ata_port_info pdc_port_info[] = { /* board_2037x */ { .sht = &pdc_ata_sht, - .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, + .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ @@ -185,7 +185,7 @@ static const struct ata_port_info pdc_port_info[] = { /* board_20319 */ { .sht = &pdc_ata_sht, - .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, + .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ @@ -195,7 +195,7 @@ static const struct ata_port_info pdc_port_info[] = { /* board_20619 */ { .sht = &pdc_ata_sht, - .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS, + .flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ @@ -205,7 +205,7 @@ static const struct ata_port_info pdc_port_info[] = { /* board_20771 */ { .sht = &pdc_ata_sht, - .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, + .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ @@ -215,7 +215,7 @@ static const struct ata_port_info pdc_port_info[] = { /* board_2057x */ { .sht = &pdc_ata_sht, - .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, + .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ @@ -225,7 +225,7 @@ static const struct ata_port_info pdc_port_info[] = { /* board_40518 */ { .sht = &pdc_ata_sht, - .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, + .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ @@ -292,7 +292,7 @@ static struct pci_driver pdc_ata_pci_driver = { static int pdc_port_start(struct ata_port *ap) { - struct device *dev = ap->host_set->dev; + struct device *dev = ap->host->dev; struct pdc_port_priv *pp; int rc; @@ -326,7 +326,7 @@ err_out: static void pdc_port_stop(struct ata_port *ap) { - struct device *dev = ap->host_set->dev; + struct device *dev = ap->host->dev; struct pdc_port_priv *pp = ap->private_data; ap->private_data = NULL; @@ -336,11 +336,11 @@ static void pdc_port_stop(struct ata_port *ap) } -static void pdc_host_stop(struct ata_host_set *host_set) +static void pdc_host_stop(struct ata_host *host) { - struct pdc_host_priv *hp = host_set->private_data; + struct pdc_host_priv *hp = host->private_data; - ata_pci_host_stop(host_set); + ata_pci_host_stop(host); kfree(hp); } @@ -443,14 +443,14 @@ static void pdc_qc_prep(struct ata_queued_cmd *qc) static void pdc_eng_timeout(struct ata_port *ap) { - struct ata_host_set *host_set = ap->host_set; + struct ata_host *host = ap->host; u8 drv_stat; struct ata_queued_cmd *qc; unsigned long flags; DPRINTK("ENTER\n"); - spin_lock_irqsave(&host_set->lock, flags); + spin_lock_irqsave(&host->lock, flags); qc = ata_qc_from_tag(ap, ap->active_tag); @@ -473,7 +473,7 @@ static void pdc_eng_timeout(struct ata_port *ap) break; } - spin_unlock_irqrestore(&host_set->lock, flags); + spin_unlock_irqrestore(&host->lock, flags); ata_eh_qc_complete(qc); DPRINTK("EXIT\n"); } @@ -509,15 +509,15 @@ static inline unsigned int pdc_host_intr( struct ata_port *ap, static void pdc_irq_clear(struct ata_port *ap) { - struct ata_host_set *host_set = ap->host_set; - void __iomem *mmio = host_set->mmio_base; + struct ata_host *host = ap->host; + void __iomem *mmio = host->mmio_base; readl(mmio + PDC_INT_SEQMASK); } static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *regs) { - struct ata_host_set *host_set = dev_instance; + struct ata_host *host = dev_instance; struct ata_port *ap; u32 mask = 0; unsigned int i, tmp; @@ -526,12 +526,12 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *r VPRINTK("ENTER\n"); - if (!host_set || !host_set->mmio_base) { + if (!host || !host->mmio_base) { VPRINTK("QUICK EXIT\n"); return IRQ_NONE; } - mmio_base = host_set->mmio_base; + mmio_base = host->mmio_base; /* reading should also clear interrupts */ mask = readl(mmio_base + PDC_INT_SEQMASK); @@ -541,7 +541,7 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *r return IRQ_NONE; } - spin_lock(&host_set->lock); + spin_lock(&host->lock); mask &= 0xffff; /* only 16 tags possible */ if (!mask) { @@ -551,9 +551,9 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *r writel(mask, mmio_base + PDC_INT_SEQMASK); - for (i = 0; i < host_set->n_ports; i++) { + for (i = 0; i < host->n_ports; i++) { VPRINTK("port %u\n", i); - ap = host_set->ports[i]; + ap = host->ports[i]; tmp = mask & (1 << (i + 1)); if (tmp && ap && !(ap->flags & ATA_FLAG_DISABLED)) { @@ -568,7 +568,7 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *r VPRINTK("EXIT\n"); done_irq: - spin_unlock(&host_set->lock); + spin_unlock(&host->lock); return IRQ_RETVAL(handled); } @@ -581,8 +581,8 @@ static inline void pdc_packet_start(struct ata_queued_cmd *qc) VPRINTK("ENTER, ap %p\n", ap); - writel(0x00000001, ap->host_set->mmio_base + (seq * 4)); - readl(ap->host_set->mmio_base + (seq * 4)); /* flush */ + writel(0x00000001, ap->host->mmio_base + (seq * 4)); + readl(ap->host->mmio_base + (seq * 4)); /* flush */ pp->pkt[2] = seq; wmb(); /* flush PRD, pkt writes */ @@ -743,7 +743,7 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e probe_ent->private_data = hp; probe_ent->sht = pdc_port_info[board_idx].sht; - probe_ent->host_flags = pdc_port_info[board_idx].host_flags; + probe_ent->port_flags = pdc_port_info[board_idx].flags; probe_ent->pio_mask = pdc_port_info[board_idx].pio_mask; probe_ent->mwdma_mask = pdc_port_info[board_idx].mwdma_mask; probe_ent->udma_mask = pdc_port_info[board_idx].udma_mask; diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c index 71bd6712b37..fa29dfe2a7b 100644 --- a/drivers/ata/sata_qstor.c +++ b/drivers/ata/sata_qstor.c @@ -116,7 +116,7 @@ static void qs_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); static int qs_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); static irqreturn_t qs_intr (int irq, void *dev_instance, struct pt_regs *regs); static int qs_port_start(struct ata_port *ap); -static void qs_host_stop(struct ata_host_set *host_set); +static void qs_host_stop(struct ata_host *host); static void qs_port_stop(struct ata_port *ap); static void qs_phy_reset(struct ata_port *ap); static void qs_qc_prep(struct ata_queued_cmd *qc); @@ -174,7 +174,7 @@ static const struct ata_port_info qs_port_info[] = { /* board_2068_idx */ { .sht = &qs_ata_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET | //FIXME ATA_FLAG_SRST | ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING, @@ -220,7 +220,7 @@ static void qs_irq_clear(struct ata_port *ap) static inline void qs_enter_reg_mode(struct ata_port *ap) { - u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000); + u8 __iomem *chan = ap->host->mmio_base + (ap->port_no * 0x4000); writeb(QS_CTR0_REG, chan + QS_CCT_CTR0); readb(chan + QS_CCT_CTR0); /* flush */ @@ -228,7 +228,7 @@ static inline void qs_enter_reg_mode(struct ata_port *ap) static inline void qs_reset_channel_logic(struct ata_port *ap) { - u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000); + u8 __iomem *chan = ap->host->mmio_base + (ap->port_no * 0x4000); writeb(QS_CTR1_RCHN, chan + QS_CCT_CTR1); readb(chan + QS_CCT_CTR0); /* flush */ @@ -342,7 +342,7 @@ static void qs_qc_prep(struct ata_queued_cmd *qc) static inline void qs_packet_start(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000); + u8 __iomem *chan = ap->host->mmio_base + (ap->port_no * 0x4000); VPRINTK("ENTER, ap %p\n", ap); @@ -375,11 +375,11 @@ static unsigned int qs_qc_issue(struct ata_queued_cmd *qc) return ata_qc_issue_prot(qc); } -static inline unsigned int qs_intr_pkt(struct ata_host_set *host_set) +static inline unsigned int qs_intr_pkt(struct ata_host *host) { unsigned int handled = 0; u8 sFFE; - u8 __iomem *mmio_base = host_set->mmio_base; + u8 __iomem *mmio_base = host->mmio_base; do { u32 sff0 = readl(mmio_base + QS_HST_SFF); @@ -391,7 +391,7 @@ static inline unsigned int qs_intr_pkt(struct ata_host_set *host_set) u8 sDST = sff0 >> 16; /* dev status */ u8 sHST = sff1 & 0x3f; /* host status */ unsigned int port_no = (sff1 >> 8) & 0x03; - struct ata_port *ap = host_set->ports[port_no]; + struct ata_port *ap = host->ports[port_no]; DPRINTK("SFF=%08x%08x: sCHAN=%u sHST=%d sDST=%02x\n", sff1, sff0, port_no, sHST, sDST); @@ -421,13 +421,13 @@ static inline unsigned int qs_intr_pkt(struct ata_host_set *host_set) return handled; } -static inline unsigned int qs_intr_mmio(struct ata_host_set *host_set) +static inline unsigned int qs_intr_mmio(struct ata_host *host) { unsigned int handled = 0, port_no; - for (port_no = 0; port_no < host_set->n_ports; ++port_no) { + for (port_no = 0; port_no < host->n_ports; ++port_no) { struct ata_port *ap; - ap = host_set->ports[port_no]; + ap = host->ports[port_no]; if (ap && !(ap->flags & ATA_FLAG_DISABLED)) { struct ata_queued_cmd *qc; @@ -457,14 +457,14 @@ static inline unsigned int qs_intr_mmio(struct ata_host_set *host_set) static irqreturn_t qs_intr(int irq, void *dev_instance, struct pt_regs *regs) { - struct ata_host_set *host_set = dev_instance; + struct ata_host *host = dev_instance; unsigned int handled = 0; VPRINTK("ENTER\n"); - spin_lock(&host_set->lock); - handled = qs_intr_pkt(host_set) | qs_intr_mmio(host_set); - spin_unlock(&host_set->lock); + spin_lock(&host->lock); + handled = qs_intr_pkt(host) | qs_intr_mmio(host); + spin_unlock(&host->lock); VPRINTK("EXIT\n"); @@ -491,9 +491,9 @@ static void qs_ata_setup_port(struct ata_ioports *port, unsigned long base) static int qs_port_start(struct ata_port *ap) { - struct device *dev = ap->host_set->dev; + struct device *dev = ap->host->dev; struct qs_port_priv *pp; - void __iomem *mmio_base = ap->host_set->mmio_base; + void __iomem *mmio_base = ap->host->mmio_base; void __iomem *chan = mmio_base + (ap->port_no * 0x4000); u64 addr; int rc; @@ -530,7 +530,7 @@ err_out: static void qs_port_stop(struct ata_port *ap) { - struct device *dev = ap->host_set->dev; + struct device *dev = ap->host->dev; struct qs_port_priv *pp = ap->private_data; if (pp != NULL) { @@ -543,10 +543,10 @@ static void qs_port_stop(struct ata_port *ap) ata_port_stop(ap); } -static void qs_host_stop(struct ata_host_set *host_set) +static void qs_host_stop(struct ata_host *host) { - void __iomem *mmio_base = host_set->mmio_base; - struct pci_dev *pdev = to_pci_dev(host_set->dev); + void __iomem *mmio_base = host->mmio_base; + struct pci_dev *pdev = to_pci_dev(host->dev); writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */ writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */ @@ -673,7 +673,7 @@ static int qs_ata_init_one(struct pci_dev *pdev, INIT_LIST_HEAD(&probe_ent->node); probe_ent->sht = qs_port_info[board_idx].sht; - probe_ent->host_flags = qs_port_info[board_idx].host_flags; + probe_ent->port_flags = qs_port_info[board_idx].flags; probe_ent->pio_mask = qs_port_info[board_idx].pio_mask; probe_ent->mwdma_mask = qs_port_info[board_idx].mwdma_mask; probe_ent->udma_mask = qs_port_info[board_idx].udma_mask; diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index f17b3ae4dd3..c63dbabc0cd 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -56,7 +56,7 @@ enum { SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29), SIL_FLAG_MOD15WRITE = (1 << 30), - SIL_DFL_HOST_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + SIL_DFL_PORT_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_HRST_TO_RESUME, /* @@ -218,7 +218,7 @@ static const struct ata_port_info sil_port_info[] = { /* sil_3112 */ { .sht = &sil_sht, - .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_MOD15WRITE, + .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -227,7 +227,7 @@ static const struct ata_port_info sil_port_info[] = { /* sil_3112_no_sata_irq */ { .sht = &sil_sht, - .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_MOD15WRITE | + .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE | SIL_FLAG_NO_SATA_IRQ, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -237,7 +237,7 @@ static const struct ata_port_info sil_port_info[] = { /* sil_3512 */ { .sht = &sil_sht, - .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, + .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -246,7 +246,7 @@ static const struct ata_port_info sil_port_info[] = { /* sil_3114 */ { .sht = &sil_sht, - .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, + .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -295,10 +295,9 @@ static unsigned char sil_get_device_cache_line(struct pci_dev *pdev) static void sil_post_set_mode (struct ata_port *ap) { - struct ata_host_set *host_set = ap->host_set; + struct ata_host *host = ap->host; struct ata_device *dev; - void __iomem *addr = - host_set->mmio_base + sil_port[ap->port_no].xfer_mode; + void __iomem *addr = host->mmio_base + sil_port[ap->port_no].xfer_mode; u32 tmp, dev_mode[2]; unsigned int i; @@ -440,15 +439,15 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2) static irqreturn_t sil_interrupt(int irq, void *dev_instance, struct pt_regs *regs) { - struct ata_host_set *host_set = dev_instance; - void __iomem *mmio_base = host_set->mmio_base; + struct ata_host *host = dev_instance; + void __iomem *mmio_base = host->mmio_base; int handled = 0; int i; - spin_lock(&host_set->lock); + spin_lock(&host->lock); - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; u32 bmdma2 = readl(mmio_base + sil_port[ap->port_no].bmdma2); if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED)) @@ -466,14 +465,14 @@ static irqreturn_t sil_interrupt(int irq, void *dev_instance, handled = 1; } - spin_unlock(&host_set->lock); + spin_unlock(&host->lock); return IRQ_RETVAL(handled); } static void sil_freeze(struct ata_port *ap) { - void __iomem *mmio_base = ap->host_set->mmio_base; + void __iomem *mmio_base = ap->host->mmio_base; u32 tmp; /* global IRQ mask doesn't block SATA IRQ, turn off explicitly */ @@ -488,7 +487,7 @@ static void sil_freeze(struct ata_port *ap) static void sil_thaw(struct ata_port *ap) { - void __iomem *mmio_base = ap->host_set->mmio_base; + void __iomem *mmio_base = ap->host->mmio_base; u32 tmp; /* clear IRQ */ @@ -567,7 +566,7 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) } static void sil_init_controller(struct pci_dev *pdev, - int n_ports, unsigned long host_flags, + int n_ports, unsigned long port_flags, void __iomem *mmio_base) { u8 cls; @@ -587,7 +586,7 @@ static void sil_init_controller(struct pci_dev *pdev, "cache line size not set. Driver may not function\n"); /* Apply R_ERR on DMA activate FIS errata workaround */ - if (host_flags & SIL_FLAG_RERR_ON_DMA_ACT) { + if (port_flags & SIL_FLAG_RERR_ON_DMA_ACT) { int cnt; for (i = 0, cnt = 0; i < n_ports; i++) { @@ -658,7 +657,7 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->udma_mask = sil_port_info[ent->driver_data].udma_mask; probe_ent->irq = pdev->irq; probe_ent->irq_flags = IRQF_SHARED; - probe_ent->host_flags = sil_port_info[ent->driver_data].host_flags; + probe_ent->port_flags = sil_port_info[ent->driver_data].flags; mmio_base = pci_iomap(pdev, 5, 0); if (mmio_base == NULL) { @@ -679,7 +678,7 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) ata_std_ports(&probe_ent->port[i]); } - sil_init_controller(pdev, probe_ent->n_ports, probe_ent->host_flags, + sil_init_controller(pdev, probe_ent->n_ports, probe_ent->port_flags, mmio_base); pci_set_master(pdev); @@ -703,12 +702,12 @@ err_out: #ifdef CONFIG_PM static int sil_pci_device_resume(struct pci_dev *pdev) { - struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); + struct ata_host *host = dev_get_drvdata(&pdev->dev); ata_pci_device_do_resume(pdev); - sil_init_controller(pdev, host_set->n_ports, host_set->ports[0]->flags, - host_set->mmio_base); - ata_host_set_resume(host_set); + sil_init_controller(pdev, host->n_ports, host->ports[0]->flags, + host->mmio_base); + ata_host_resume(host); return 0; } diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 2d7cf326458..39cb07baeba 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -316,7 +316,7 @@ struct sil24_port_priv { struct ata_taskfile tf; /* Cached taskfile registers */ }; -/* ap->host_set->private_data */ +/* ap->host->private_data */ struct sil24_host_priv { void __iomem *host_base; /* global controller control (128 bytes @BAR0) */ void __iomem *port_base; /* port registers (4 * 8192 bytes @BAR2) */ @@ -337,7 +337,7 @@ static void sil24_error_handler(struct ata_port *ap); static void sil24_post_internal_cmd(struct ata_queued_cmd *qc); static int sil24_port_start(struct ata_port *ap); static void sil24_port_stop(struct ata_port *ap); -static void sil24_host_stop(struct ata_host_set *host_set); +static void sil24_host_stop(struct ata_host *host); static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); #ifdef CONFIG_PM static int sil24_pci_device_resume(struct pci_dev *pdev); @@ -415,7 +415,7 @@ static const struct ata_port_operations sil24_ops = { }; /* - * Use bits 30-31 of host_flags to encode available port numbers. + * Use bits 30-31 of port_flags to encode available port numbers. * Current maxium is 4. */ #define SIL24_NPORTS2FLAG(nports) ((((unsigned)(nports) - 1) & 0x3) << 30) @@ -425,7 +425,7 @@ static struct ata_port_info sil24_port_info[] = { /* sil_3124 */ { .sht = &sil24_sht, - .host_flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) | + .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) | SIL24_FLAG_PCIX_IRQ_WOC, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -435,7 +435,7 @@ static struct ata_port_info sil24_port_info[] = { /* sil_3132 */ { .sht = &sil24_sht, - .host_flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2), + .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2), .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -444,7 +444,7 @@ static struct ata_port_info sil24_port_info[] = { /* sil_3131/sil_3531 */ { .sht = &sil24_sht, - .host_flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1), + .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1), .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -871,8 +871,8 @@ static inline void sil24_host_intr(struct ata_port *ap) static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs) { - struct ata_host_set *host_set = dev_instance; - struct sil24_host_priv *hpriv = host_set->private_data; + struct ata_host *host = dev_instance; + struct sil24_host_priv *hpriv = host->private_data; unsigned handled = 0; u32 status; int i; @@ -888,20 +888,20 @@ static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs * if (!(status & IRQ_STAT_4PORTS)) goto out; - spin_lock(&host_set->lock); + spin_lock(&host->lock); - for (i = 0; i < host_set->n_ports; i++) + for (i = 0; i < host->n_ports; i++) if (status & (1 << i)) { - struct ata_port *ap = host_set->ports[i]; + struct ata_port *ap = host->ports[i]; if (ap && !(ap->flags & ATA_FLAG_DISABLED)) { - sil24_host_intr(host_set->ports[i]); + sil24_host_intr(host->ports[i]); handled++; } else printk(KERN_ERR DRV_NAME ": interrupt from disabled port %d\n", i); } - spin_unlock(&host_set->lock); + spin_unlock(&host->lock); out: return IRQ_RETVAL(handled); } @@ -941,7 +941,7 @@ static inline void sil24_cblk_free(struct sil24_port_priv *pp, struct device *de static int sil24_port_start(struct ata_port *ap) { - struct device *dev = ap->host_set->dev; + struct device *dev = ap->host->dev; struct sil24_port_priv *pp; union sil24_cmd_block *cb; size_t cb_size = sizeof(*cb) * SIL24_MAX_CMDS; @@ -980,7 +980,7 @@ err_out: static void sil24_port_stop(struct ata_port *ap) { - struct device *dev = ap->host_set->dev; + struct device *dev = ap->host->dev; struct sil24_port_priv *pp = ap->private_data; sil24_cblk_free(pp, dev); @@ -988,10 +988,10 @@ static void sil24_port_stop(struct ata_port *ap) kfree(pp); } -static void sil24_host_stop(struct ata_host_set *host_set) +static void sil24_host_stop(struct ata_host *host) { - struct sil24_host_priv *hpriv = host_set->private_data; - struct pci_dev *pdev = to_pci_dev(host_set->dev); + struct sil24_host_priv *hpriv = host->private_data; + struct pci_dev *pdev = to_pci_dev(host->dev); pci_iounmap(pdev, hpriv->host_base); pci_iounmap(pdev, hpriv->port_base); @@ -999,7 +999,7 @@ static void sil24_host_stop(struct ata_host_set *host_set) } static void sil24_init_controller(struct pci_dev *pdev, int n_ports, - unsigned long host_flags, + unsigned long port_flags, void __iomem *host_base, void __iomem *port_base) { @@ -1032,7 +1032,7 @@ static void sil24_init_controller(struct pci_dev *pdev, int n_ports, } /* Configure IRQ WoC */ - if (host_flags & SIL24_FLAG_PCIX_IRQ_WOC) + if (port_flags & SIL24_FLAG_PCIX_IRQ_WOC) writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT); else writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); @@ -1101,12 +1101,12 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) INIT_LIST_HEAD(&probe_ent->node); probe_ent->sht = pinfo->sht; - probe_ent->host_flags = pinfo->host_flags; + probe_ent->port_flags = pinfo->flags; probe_ent->pio_mask = pinfo->pio_mask; probe_ent->mwdma_mask = pinfo->mwdma_mask; probe_ent->udma_mask = pinfo->udma_mask; probe_ent->port_ops = pinfo->port_ops; - probe_ent->n_ports = SIL24_FLAG2NPORTS(pinfo->host_flags); + probe_ent->n_ports = SIL24_FLAG2NPORTS(pinfo->flags); probe_ent->irq = pdev->irq; probe_ent->irq_flags = IRQF_SHARED; @@ -1144,14 +1144,14 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } /* Apply workaround for completion IRQ loss on PCI-X errata */ - if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC) { + if (probe_ent->port_flags & SIL24_FLAG_PCIX_IRQ_WOC) { tmp = readl(host_base + HOST_CTRL); if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL)) dev_printk(KERN_INFO, &pdev->dev, "Applying completion IRQ loss on PCI-X " "errata fix\n"); else - probe_ent->host_flags &= ~SIL24_FLAG_PCIX_IRQ_WOC; + probe_ent->port_flags &= ~SIL24_FLAG_PCIX_IRQ_WOC; } for (i = 0; i < probe_ent->n_ports; i++) { @@ -1164,7 +1164,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) ata_std_ports(&probe_ent->port[i]); } - sil24_init_controller(pdev, probe_ent->n_ports, probe_ent->host_flags, + sil24_init_controller(pdev, probe_ent->n_ports, probe_ent->port_flags, host_base, port_base); pci_set_master(pdev); @@ -1191,19 +1191,18 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) #ifdef CONFIG_PM static int sil24_pci_device_resume(struct pci_dev *pdev) { - struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); - struct sil24_host_priv *hpriv = host_set->private_data; + struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct sil24_host_priv *hpriv = host->private_data; ata_pci_device_do_resume(pdev); if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) writel(HOST_CTRL_GLOBAL_RST, hpriv->host_base + HOST_CTRL); - sil24_init_controller(pdev, host_set->n_ports, - host_set->ports[0]->flags, + sil24_init_controller(pdev, host->n_ports, host->ports[0]->flags, hpriv->host_base, hpriv->port_base); - ata_host_set_resume(host_set); + ata_host_resume(host); return 0; } diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c index ac24f66897f..9b17375d805 100644 --- a/drivers/ata/sata_sis.c +++ b/drivers/ata/sata_sis.c @@ -128,7 +128,7 @@ static const struct ata_port_operations sis_ops = { static struct ata_port_info sis_port_info = { .sht = &sis_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = 0x1f, .mwdma_mask = 0x7, .udma_mask = 0x7f, @@ -158,7 +158,7 @@ static unsigned int get_scr_cfg_addr(unsigned int port_no, unsigned int sc_reg, static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg) { - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg, pdev->device); u32 val, val2 = 0; u8 pmr; @@ -178,7 +178,7 @@ static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg) static void sis_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val) { - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, scr, pdev->device); u8 pmr; @@ -195,7 +195,7 @@ static void sis_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val) static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg) { - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); u32 val, val2 = 0; u8 pmr; @@ -217,7 +217,7 @@ static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg) static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) { - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); u8 pmr; if (sc_reg > SCR_CONTROL) @@ -275,17 +275,17 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) /* check and see if the SCRs are in IO space or PCI cfg space */ pci_read_config_dword(pdev, SIS_GENCTL, &genctl); if ((genctl & GENCTL_IOMAPPED_SCR) == 0) - probe_ent->host_flags |= SIS_FLAG_CFGSCR; + probe_ent->port_flags |= SIS_FLAG_CFGSCR; /* if hardware thinks SCRs are in IO space, but there are * no IO resources assigned, change to PCI cfg space. */ - if ((!(probe_ent->host_flags & SIS_FLAG_CFGSCR)) && + if ((!(probe_ent->port_flags & SIS_FLAG_CFGSCR)) && ((pci_resource_start(pdev, SIS_SCR_PCI_BAR) == 0) || (pci_resource_len(pdev, SIS_SCR_PCI_BAR) < 128))) { genctl &= ~GENCTL_IOMAPPED_SCR; pci_write_config_dword(pdev, SIS_GENCTL, genctl); - probe_ent->host_flags |= SIS_FLAG_CFGSCR; + probe_ent->port_flags |= SIS_FLAG_CFGSCR; } pci_read_config_byte(pdev, SIS_PMR, &pmr); @@ -306,7 +306,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) port2_start = 0x20; } - if (!(probe_ent->host_flags & SIS_FLAG_CFGSCR)) { + if (!(probe_ent->port_flags & SIS_FLAG_CFGSCR)) { probe_ent->port[0].scr_addr = pci_resource_start(pdev, SIS_SCR_PCI_BAR); probe_ent->port[1].scr_addr = diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c index baf259a966d..2a7e3495cf1 100644 --- a/drivers/ata/sata_svw.c +++ b/drivers/ata/sata_svw.c @@ -169,7 +169,7 @@ static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) * @qc: Info associated with this ATA transaction. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ static void k2_bmdma_setup_mmio (struct ata_queued_cmd *qc) @@ -199,7 +199,7 @@ static void k2_bmdma_setup_mmio (struct ata_queued_cmd *qc) * @qc: Info associated with this ATA transaction. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ static void k2_bmdma_start_mmio (struct ata_queued_cmd *qc) @@ -261,12 +261,12 @@ static int k2_sata_proc_info(struct Scsi_Host *shost, char *page, char **start, return 0; /* Find the OF node for the PCI device proper */ - np = pci_device_to_OF_node(to_pci_dev(ap->host_set->dev)); + np = pci_device_to_OF_node(to_pci_dev(ap->host->dev)); if (np == NULL) return 0; /* Match it to a port node */ - index = (ap == ap->host_set->ports[0]) ? 0 : 1; + index = (ap == ap->host->ports[0]) ? 0 : 1; for (np = np->child; np != NULL; np = np->sibling) { u32 *reg = (u32 *)get_property(np, "reg", NULL); if (!reg) @@ -423,7 +423,7 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e writel(0x0, mmio_base + K2_SATA_SIM_OFFSET); probe_ent->sht = &k2_sata_sht; - probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO; probe_ent->port_ops = &k2_sata_ops; probe_ent->n_ports = 4; diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index 0da83cba5c1..091867e10ea 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -160,7 +160,7 @@ static void pdc_port_stop(struct ata_port *ap); static void pdc20621_qc_prep(struct ata_queued_cmd *qc); static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf); static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf); -static void pdc20621_host_stop(struct ata_host_set *host_set); +static void pdc20621_host_stop(struct ata_host *host); static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe); static int pdc20621_detect_dimm(struct ata_probe_ent *pe); static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, @@ -218,7 +218,7 @@ static const struct ata_port_info pdc_port_info[] = { /* board_20621 */ { .sht = &pdc_sata_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SRST | ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING, .pio_mask = 0x1f, /* pio0-4 */ @@ -244,21 +244,21 @@ static struct pci_driver pdc_sata_pci_driver = { }; -static void pdc20621_host_stop(struct ata_host_set *host_set) +static void pdc20621_host_stop(struct ata_host *host) { - struct pci_dev *pdev = to_pci_dev(host_set->dev); - struct pdc_host_priv *hpriv = host_set->private_data; + struct pci_dev *pdev = to_pci_dev(host->dev); + struct pdc_host_priv *hpriv = host->private_data; void __iomem *dimm_mmio = hpriv->dimm_mmio; pci_iounmap(pdev, dimm_mmio); kfree(hpriv); - pci_iounmap(pdev, host_set->mmio_base); + pci_iounmap(pdev, host->mmio_base); } static int pdc_port_start(struct ata_port *ap) { - struct device *dev = ap->host_set->dev; + struct device *dev = ap->host->dev; struct pdc_port_priv *pp; int rc; @@ -293,7 +293,7 @@ err_out: static void pdc_port_stop(struct ata_port *ap) { - struct device *dev = ap->host_set->dev; + struct device *dev = ap->host->dev; struct pdc_port_priv *pp = ap->private_data; ap->private_data = NULL; @@ -453,8 +453,8 @@ static void pdc20621_dma_prep(struct ata_queued_cmd *qc) struct scatterlist *sg; struct ata_port *ap = qc->ap; struct pdc_port_priv *pp = ap->private_data; - void __iomem *mmio = ap->host_set->mmio_base; - struct pdc_host_priv *hpriv = ap->host_set->private_data; + void __iomem *mmio = ap->host->mmio_base; + struct pdc_host_priv *hpriv = ap->host->private_data; void __iomem *dimm_mmio = hpriv->dimm_mmio; unsigned int portno = ap->port_no; unsigned int i, idx, total_len = 0, sgt_len; @@ -514,8 +514,8 @@ static void pdc20621_nodata_prep(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct pdc_port_priv *pp = ap->private_data; - void __iomem *mmio = ap->host_set->mmio_base; - struct pdc_host_priv *hpriv = ap->host_set->private_data; + void __iomem *mmio = ap->host->mmio_base; + struct pdc_host_priv *hpriv = ap->host->private_data; void __iomem *dimm_mmio = hpriv->dimm_mmio; unsigned int portno = ap->port_no; unsigned int i; @@ -565,8 +565,8 @@ static void __pdc20621_push_hdma(struct ata_queued_cmd *qc, u32 pkt_ofs) { struct ata_port *ap = qc->ap; - struct ata_host_set *host_set = ap->host_set; - void __iomem *mmio = host_set->mmio_base; + struct ata_host *host = ap->host; + void __iomem *mmio = host->mmio_base; /* hard-code chip #0 */ mmio += PDC_CHIP0_OFS; @@ -583,7 +583,7 @@ static void pdc20621_push_hdma(struct ata_queued_cmd *qc, u32 pkt_ofs) { struct ata_port *ap = qc->ap; - struct pdc_host_priv *pp = ap->host_set->private_data; + struct pdc_host_priv *pp = ap->host->private_data; unsigned int idx = pp->hdma_prod & PDC_HDMA_Q_MASK; if (!pp->doing_hdma) { @@ -601,7 +601,7 @@ static void pdc20621_push_hdma(struct ata_queued_cmd *qc, static void pdc20621_pop_hdma(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - struct pdc_host_priv *pp = ap->host_set->private_data; + struct pdc_host_priv *pp = ap->host->private_data; unsigned int idx = pp->hdma_cons & PDC_HDMA_Q_MASK; /* if nothing on queue, we're done */ @@ -620,7 +620,7 @@ static void pdc20621_dump_hdma(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; unsigned int port_no = ap->port_no; - struct pdc_host_priv *hpriv = ap->host_set->private_data; + struct pdc_host_priv *hpriv = ap->host->private_data; void *dimm_mmio = hpriv->dimm_mmio; dimm_mmio += (port_no * PDC_DIMM_WINDOW_STEP); @@ -638,9 +638,9 @@ static inline void pdc20621_dump_hdma(struct ata_queued_cmd *qc) { } static void pdc20621_packet_start(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - struct ata_host_set *host_set = ap->host_set; + struct ata_host *host = ap->host; unsigned int port_no = ap->port_no; - void __iomem *mmio = host_set->mmio_base; + void __iomem *mmio = host->mmio_base; unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); u8 seq = (u8) (port_no + 1); unsigned int port_ofs; @@ -781,8 +781,8 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap, static void pdc20621_irq_clear(struct ata_port *ap) { - struct ata_host_set *host_set = ap->host_set; - void __iomem *mmio = host_set->mmio_base; + struct ata_host *host = ap->host; + void __iomem *mmio = host->mmio_base; mmio += PDC_CHIP0_OFS; @@ -791,7 +791,7 @@ static void pdc20621_irq_clear(struct ata_port *ap) static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_regs *regs) { - struct ata_host_set *host_set = dev_instance; + struct ata_host *host = dev_instance; struct ata_port *ap; u32 mask = 0; unsigned int i, tmp, port_no; @@ -800,12 +800,12 @@ static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_re VPRINTK("ENTER\n"); - if (!host_set || !host_set->mmio_base) { + if (!host || !host->mmio_base) { VPRINTK("QUICK EXIT\n"); return IRQ_NONE; } - mmio_base = host_set->mmio_base; + mmio_base = host->mmio_base; /* reading should also clear interrupts */ mmio_base += PDC_CHIP0_OFS; @@ -822,16 +822,16 @@ static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_re return IRQ_NONE; } - spin_lock(&host_set->lock); + spin_lock(&host->lock); for (i = 1; i < 9; i++) { port_no = i - 1; if (port_no > 3) port_no -= 4; - if (port_no >= host_set->n_ports) + if (port_no >= host->n_ports) ap = NULL; else - ap = host_set->ports[port_no]; + ap = host->ports[port_no]; tmp = mask & (1 << i); VPRINTK("seq %u, port_no %u, ap %p, tmp %x\n", i, port_no, ap, tmp); if (tmp && ap && @@ -845,7 +845,7 @@ static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_re } } - spin_unlock(&host_set->lock); + spin_unlock(&host->lock); VPRINTK("mask == 0x%x\n", mask); @@ -857,13 +857,13 @@ static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_re static void pdc_eng_timeout(struct ata_port *ap) { u8 drv_stat; - struct ata_host_set *host_set = ap->host_set; + struct ata_host *host = ap->host; struct ata_queued_cmd *qc; unsigned long flags; DPRINTK("ENTER\n"); - spin_lock_irqsave(&host_set->lock, flags); + spin_lock_irqsave(&host->lock, flags); qc = ata_qc_from_tag(ap, ap->active_tag); @@ -885,7 +885,7 @@ static void pdc_eng_timeout(struct ata_port *ap) break; } - spin_unlock_irqrestore(&host_set->lock, flags); + spin_unlock_irqrestore(&host->lock, flags); ata_eh_qc_complete(qc); DPRINTK("EXIT\n"); } @@ -1429,7 +1429,7 @@ static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id * hpriv->dimm_mmio = dimm_mmio; probe_ent->sht = pdc_port_info[board_idx].sht; - probe_ent->host_flags = pdc_port_info[board_idx].host_flags; + probe_ent->port_flags = pdc_port_info[board_idx].flags; probe_ent->pio_mask = pdc_port_info[board_idx].pio_mask; probe_ent->mwdma_mask = pdc_port_info[board_idx].mwdma_mask; probe_ent->udma_mask = pdc_port_info[board_idx].udma_mask; diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c index 654aae2b25c..8fc6e800011 100644 --- a/drivers/ata/sata_uli.c +++ b/drivers/ata/sata_uli.c @@ -128,7 +128,7 @@ static const struct ata_port_operations uli_ops = { static struct ata_port_info uli_port_info = { .sht = &uli_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &uli_ops, @@ -143,13 +143,13 @@ MODULE_VERSION(DRV_VERSION); static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg) { - struct uli_priv *hpriv = ap->host_set->private_data; + struct uli_priv *hpriv = ap->host->private_data; return hpriv->scr_cfg_addr[ap->port_no] + (4 * sc_reg); } static u32 uli_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg) { - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); unsigned int cfg_addr = get_scr_cfg_addr(ap, sc_reg); u32 val; @@ -159,7 +159,7 @@ static u32 uli_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg) static void uli_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val) { - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); unsigned int cfg_addr = get_scr_cfg_addr(ap, scr); pci_write_config_dword(pdev, cfg_addr, val); diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index a0699a1728d..7f087aef99d 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -176,7 +176,7 @@ static const struct ata_port_operations vt6421_sata_ops = { static struct ata_port_info vt6420_port_info = { .sht = &svia_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = 0x1f, .mwdma_mask = 0x07, .udma_mask = 0x7f, @@ -346,7 +346,7 @@ static struct ata_probe_ent *vt6421_init_probe_ent(struct pci_dev *pdev) INIT_LIST_HEAD(&probe_ent->node); probe_ent->sht = &svia_sht; - probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY; + probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY; probe_ent->port_ops = &vt6421_sata_ops; probe_ent->n_ports = N_PORTS; probe_ent->irq = pdev->irq; diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c index 4c69a705a48..d0d92f33de5 100644 --- a/drivers/ata/sata_vsc.c +++ b/drivers/ata/sata_vsc.c @@ -123,7 +123,7 @@ static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl) void __iomem *mask_addr; u8 mask; - mask_addr = ap->host_set->mmio_base + + mask_addr = ap->host->mmio_base + VSC_SATA_INT_MASK_OFFSET + ap->port_no; mask = readb(mask_addr); if (ctl & ATA_NIEN) @@ -206,20 +206,20 @@ static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) { - struct ata_host_set *host_set = dev_instance; + struct ata_host *host = dev_instance; unsigned int i; unsigned int handled = 0; u32 int_status; - spin_lock(&host_set->lock); + spin_lock(&host->lock); - int_status = readl(host_set->mmio_base + VSC_SATA_INT_STAT_OFFSET); + int_status = readl(host->mmio_base + VSC_SATA_INT_STAT_OFFSET); - for (i = 0; i < host_set->n_ports; i++) { + for (i = 0; i < host->n_ports; i++) { if (int_status & ((u32) 0xFF << (8 * i))) { struct ata_port *ap; - ap = host_set->ports[i]; + ap = host->ports[i]; if (is_vsc_sata_int_err(i, int_status)) { u32 err_status; @@ -259,7 +259,7 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance, } } - spin_unlock(&host_set->lock); + spin_unlock(&host->lock); return IRQ_RETVAL(handled); } @@ -395,7 +395,7 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80); probe_ent->sht = &vsc_sata_sht; - probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO; probe_ent->port_ops = &vsc_sata_ops; probe_ent->n_ports = 4; -- cgit v1.2.3 From e889173c2c67dc288e9b050ab066cfae151b047e Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 24 Aug 2006 03:55:09 -0400 Subject: Rename libata-bmdma.c to libata-sff.c. Signed-off-by: Jeff Garzik --- drivers/ata/Makefile | 2 +- drivers/ata/libata-bmdma.c | 1109 -------------------------------------------- drivers/ata/libata-sff.c | 1109 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1110 insertions(+), 1110 deletions(-) delete mode 100644 drivers/ata/libata-bmdma.c create mode 100644 drivers/ata/libata-sff.c (limited to 'drivers') diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index c17ae9c8b91..e260e3fe65c 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -17,5 +17,5 @@ obj-$(CONFIG_SATA_ULI) += sata_uli.o obj-$(CONFIG_SATA_MV) += sata_mv.o obj-$(CONFIG_PDC_ADMA) += pdc_adma.o -libata-objs := libata-core.o libata-scsi.o libata-bmdma.o libata-eh.o +libata-objs := libata-core.o libata-scsi.o libata-sff.o libata-eh.o diff --git a/drivers/ata/libata-bmdma.c b/drivers/ata/libata-bmdma.c deleted file mode 100644 index 76050285982..00000000000 --- a/drivers/ata/libata-bmdma.c +++ /dev/null @@ -1,1109 +0,0 @@ -/* - * libata-bmdma.c - helper library for PCI IDE BMDMA - * - * Maintained by: Jeff Garzik - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * Copyright 2003-2006 Red Hat, Inc. All rights reserved. - * Copyright 2003-2006 Jeff Garzik - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Hardware documentation available from http://www.t13.org/ and - * http://www.sata-io.org/ - * - */ - -#include -#include -#include - -#include "libata.h" - -/** - * ata_tf_load_pio - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Outputs ATA taskfile to standard ATA host controller. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_load_pio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; - - if (tf->ctl != ap->last_ctl) { - outb(tf->ctl, ioaddr->ctl_addr); - ap->last_ctl = tf->ctl; - ata_wait_idle(ap); - } - - if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { - outb(tf->hob_feature, ioaddr->feature_addr); - outb(tf->hob_nsect, ioaddr->nsect_addr); - outb(tf->hob_lbal, ioaddr->lbal_addr); - outb(tf->hob_lbam, ioaddr->lbam_addr); - outb(tf->hob_lbah, ioaddr->lbah_addr); - VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", - tf->hob_feature, - tf->hob_nsect, - tf->hob_lbal, - tf->hob_lbam, - tf->hob_lbah); - } - - if (is_addr) { - outb(tf->feature, ioaddr->feature_addr); - outb(tf->nsect, ioaddr->nsect_addr); - outb(tf->lbal, ioaddr->lbal_addr); - outb(tf->lbam, ioaddr->lbam_addr); - outb(tf->lbah, ioaddr->lbah_addr); - VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", - tf->feature, - tf->nsect, - tf->lbal, - tf->lbam, - tf->lbah); - } - - if (tf->flags & ATA_TFLAG_DEVICE) { - outb(tf->device, ioaddr->device_addr); - VPRINTK("device 0x%X\n", tf->device); - } - - ata_wait_idle(ap); -} - -/** - * ata_tf_load_mmio - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Outputs ATA taskfile to standard ATA host controller using MMIO. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; - - if (tf->ctl != ap->last_ctl) { - writeb(tf->ctl, (void __iomem *) ap->ioaddr.ctl_addr); - ap->last_ctl = tf->ctl; - ata_wait_idle(ap); - } - - if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { - writeb(tf->hob_feature, (void __iomem *) ioaddr->feature_addr); - writeb(tf->hob_nsect, (void __iomem *) ioaddr->nsect_addr); - writeb(tf->hob_lbal, (void __iomem *) ioaddr->lbal_addr); - writeb(tf->hob_lbam, (void __iomem *) ioaddr->lbam_addr); - writeb(tf->hob_lbah, (void __iomem *) ioaddr->lbah_addr); - VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", - tf->hob_feature, - tf->hob_nsect, - tf->hob_lbal, - tf->hob_lbam, - tf->hob_lbah); - } - - if (is_addr) { - writeb(tf->feature, (void __iomem *) ioaddr->feature_addr); - writeb(tf->nsect, (void __iomem *) ioaddr->nsect_addr); - writeb(tf->lbal, (void __iomem *) ioaddr->lbal_addr); - writeb(tf->lbam, (void __iomem *) ioaddr->lbam_addr); - writeb(tf->lbah, (void __iomem *) ioaddr->lbah_addr); - VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", - tf->feature, - tf->nsect, - tf->lbal, - tf->lbam, - tf->lbah); - } - - if (tf->flags & ATA_TFLAG_DEVICE) { - writeb(tf->device, (void __iomem *) ioaddr->device_addr); - VPRINTK("device 0x%X\n", tf->device); - } - - ata_wait_idle(ap); -} - - -/** - * ata_tf_load - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Outputs ATA taskfile to standard ATA host controller using MMIO - * or PIO as indicated by the ATA_FLAG_MMIO flag. - * Writes the control, feature, nsect, lbal, lbam, and lbah registers. - * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect, - * hob_lbal, hob_lbam, and hob_lbah. - * - * This function waits for idle (!BUSY and !DRQ) after writing - * registers. If the control register has a new value, this - * function also waits for idle after writing control and before - * writing the remaining registers. - * - * May be used as the tf_load() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) -{ - if (ap->flags & ATA_FLAG_MMIO) - ata_tf_load_mmio(ap, tf); - else - ata_tf_load_pio(ap, tf); -} - -/** - * ata_exec_command_pio - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues PIO write to ATA command register, with proper - * synchronization with interrupt handler / other threads. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ - -static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); - - outb(tf->command, ap->ioaddr.command_addr); - ata_pause(ap); -} - - -/** - * ata_exec_command_mmio - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues MMIO write to ATA command register, with proper - * synchronization with interrupt handler / other threads. - * - * FIXME: missing write posting for 400nS delay enforcement - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ - -static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); - - writeb(tf->command, (void __iomem *) ap->ioaddr.command_addr); - ata_pause(ap); -} - - -/** - * ata_exec_command - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues PIO/MMIO write to ATA command register, with proper - * synchronization with interrupt handler / other threads. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ -void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) -{ - if (ap->flags & ATA_FLAG_MMIO) - ata_exec_command_mmio(ap, tf); - else - ata_exec_command_pio(ap, tf); -} - -/** - * ata_tf_read_pio - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input - * - * Reads ATA taskfile registers for currently-selected device - * into @tf. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_read_pio(struct ata_port *ap, struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - tf->command = ata_check_status(ap); - tf->feature = inb(ioaddr->error_addr); - tf->nsect = inb(ioaddr->nsect_addr); - tf->lbal = inb(ioaddr->lbal_addr); - tf->lbam = inb(ioaddr->lbam_addr); - tf->lbah = inb(ioaddr->lbah_addr); - tf->device = inb(ioaddr->device_addr); - - if (tf->flags & ATA_TFLAG_LBA48) { - outb(tf->ctl | ATA_HOB, ioaddr->ctl_addr); - tf->hob_feature = inb(ioaddr->error_addr); - tf->hob_nsect = inb(ioaddr->nsect_addr); - tf->hob_lbal = inb(ioaddr->lbal_addr); - tf->hob_lbam = inb(ioaddr->lbam_addr); - tf->hob_lbah = inb(ioaddr->lbah_addr); - } -} - -/** - * ata_tf_read_mmio - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input - * - * Reads ATA taskfile registers for currently-selected device - * into @tf via MMIO. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - tf->command = ata_check_status(ap); - tf->feature = readb((void __iomem *)ioaddr->error_addr); - tf->nsect = readb((void __iomem *)ioaddr->nsect_addr); - tf->lbal = readb((void __iomem *)ioaddr->lbal_addr); - tf->lbam = readb((void __iomem *)ioaddr->lbam_addr); - tf->lbah = readb((void __iomem *)ioaddr->lbah_addr); - tf->device = readb((void __iomem *)ioaddr->device_addr); - - if (tf->flags & ATA_TFLAG_LBA48) { - writeb(tf->ctl | ATA_HOB, (void __iomem *) ap->ioaddr.ctl_addr); - tf->hob_feature = readb((void __iomem *)ioaddr->error_addr); - tf->hob_nsect = readb((void __iomem *)ioaddr->nsect_addr); - tf->hob_lbal = readb((void __iomem *)ioaddr->lbal_addr); - tf->hob_lbam = readb((void __iomem *)ioaddr->lbam_addr); - tf->hob_lbah = readb((void __iomem *)ioaddr->lbah_addr); - } -} - - -/** - * ata_tf_read - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input - * - * Reads ATA taskfile registers for currently-selected device - * into @tf. - * - * Reads nsect, lbal, lbam, lbah, and device. If ATA_TFLAG_LBA48 - * is set, also reads the hob registers. - * - * May be used as the tf_read() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) -{ - if (ap->flags & ATA_FLAG_MMIO) - ata_tf_read_mmio(ap, tf); - else - ata_tf_read_pio(ap, tf); -} - -/** - * ata_check_status_pio - Read device status reg & clear interrupt - * @ap: port where the device is - * - * Reads ATA taskfile status register for currently-selected device - * and return its value. This also clears pending interrupts - * from this device - * - * LOCKING: - * Inherited from caller. - */ -static u8 ata_check_status_pio(struct ata_port *ap) -{ - return inb(ap->ioaddr.status_addr); -} - -/** - * ata_check_status_mmio - Read device status reg & clear interrupt - * @ap: port where the device is - * - * Reads ATA taskfile status register for currently-selected device - * via MMIO and return its value. This also clears pending interrupts - * from this device - * - * LOCKING: - * Inherited from caller. - */ -static u8 ata_check_status_mmio(struct ata_port *ap) -{ - return readb((void __iomem *) ap->ioaddr.status_addr); -} - - -/** - * ata_check_status - Read device status reg & clear interrupt - * @ap: port where the device is - * - * Reads ATA taskfile status register for currently-selected device - * and return its value. This also clears pending interrupts - * from this device - * - * May be used as the check_status() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -u8 ata_check_status(struct ata_port *ap) -{ - if (ap->flags & ATA_FLAG_MMIO) - return ata_check_status_mmio(ap); - return ata_check_status_pio(ap); -} - - -/** - * ata_altstatus - Read device alternate status reg - * @ap: port where the device is - * - * Reads ATA taskfile alternate status register for - * currently-selected device and return its value. - * - * Note: may NOT be used as the check_altstatus() entry in - * ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -u8 ata_altstatus(struct ata_port *ap) -{ - if (ap->ops->check_altstatus) - return ap->ops->check_altstatus(ap); - - if (ap->flags & ATA_FLAG_MMIO) - return readb((void __iomem *)ap->ioaddr.altstatus_addr); - return inb(ap->ioaddr.altstatus_addr); -} - -/** - * ata_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ - -static void ata_bmdma_setup_mmio (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); - u8 dmactl; - void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; - - /* load PRD table addr. */ - mb(); /* make sure PRD table writes are visible to controller */ - writel(ap->prd_dma, mmio + ATA_DMA_TABLE_OFS); - - /* specify data direction, triple-check start bit is clear */ - dmactl = readb(mmio + ATA_DMA_CMD); - dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); - if (!rw) - dmactl |= ATA_DMA_WR; - writeb(dmactl, mmio + ATA_DMA_CMD); - - /* issue r/w command */ - ap->ops->exec_command(ap, &qc->tf); -} - -/** - * ata_bmdma_start_mmio - Start a PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ - -static void ata_bmdma_start_mmio (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; - u8 dmactl; - - /* start host DMA transaction */ - dmactl = readb(mmio + ATA_DMA_CMD); - writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD); - - /* Strictly, one may wish to issue a readb() here, to - * flush the mmio write. However, control also passes - * to the hardware at this point, and it will interrupt - * us when we are to resume control. So, in effect, - * we don't care when the mmio write flushes. - * Further, a read of the DMA status register _immediately_ - * following the write may not be what certain flaky hardware - * is expected, so I think it is best to not add a readb() - * without first all the MMIO ATA cards/mobos. - * Or maybe I'm just being paranoid. - */ -} - -/** - * ata_bmdma_setup_pio - Set up PCI IDE BMDMA transaction (PIO) - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ - -static void ata_bmdma_setup_pio (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); - u8 dmactl; - - /* load PRD table addr. */ - outl(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS); - - /* specify data direction, triple-check start bit is clear */ - dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); - if (!rw) - dmactl |= ATA_DMA_WR; - outb(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - - /* issue r/w command */ - ap->ops->exec_command(ap, &qc->tf); -} - -/** - * ata_bmdma_start_pio - Start a PCI IDE BMDMA transaction (PIO) - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ - -static void ata_bmdma_start_pio (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - u8 dmactl; - - /* start host DMA transaction */ - dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - outb(dmactl | ATA_DMA_START, - ap->ioaddr.bmdma_addr + ATA_DMA_CMD); -} - - -/** - * ata_bmdma_start - Start a PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * Writes the ATA_DMA_START flag to the DMA command register. - * - * May be used as the bmdma_start() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ -void ata_bmdma_start(struct ata_queued_cmd *qc) -{ - if (qc->ap->flags & ATA_FLAG_MMIO) - ata_bmdma_start_mmio(qc); - else - ata_bmdma_start_pio(qc); -} - - -/** - * ata_bmdma_setup - Set up PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * Writes address of PRD table to device's PRD Table Address - * register, sets the DMA control register, and calls - * ops->exec_command() to start the transfer. - * - * May be used as the bmdma_setup() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ -void ata_bmdma_setup(struct ata_queued_cmd *qc) -{ - if (qc->ap->flags & ATA_FLAG_MMIO) - ata_bmdma_setup_mmio(qc); - else - ata_bmdma_setup_pio(qc); -} - - -/** - * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt. - * @ap: Port associated with this ATA transaction. - * - * Clear interrupt and error flags in DMA status register. - * - * May be used as the irq_clear() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ - -void ata_bmdma_irq_clear(struct ata_port *ap) -{ - if (!ap->ioaddr.bmdma_addr) - return; - - if (ap->flags & ATA_FLAG_MMIO) { - void __iomem *mmio = - ((void __iomem *) ap->ioaddr.bmdma_addr) + ATA_DMA_STATUS; - writeb(readb(mmio), mmio); - } else { - unsigned long addr = ap->ioaddr.bmdma_addr + ATA_DMA_STATUS; - outb(inb(addr), addr); - } -} - - -/** - * ata_bmdma_status - Read PCI IDE BMDMA status - * @ap: Port associated with this ATA transaction. - * - * Read and return BMDMA status register. - * - * May be used as the bmdma_status() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ - -u8 ata_bmdma_status(struct ata_port *ap) -{ - u8 host_stat; - if (ap->flags & ATA_FLAG_MMIO) { - void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; - host_stat = readb(mmio + ATA_DMA_STATUS); - } else - host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); - return host_stat; -} - - -/** - * ata_bmdma_stop - Stop PCI IDE BMDMA transfer - * @qc: Command we are ending DMA for - * - * Clears the ATA_DMA_START flag in the dma control register - * - * May be used as the bmdma_stop() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ - -void ata_bmdma_stop(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - if (ap->flags & ATA_FLAG_MMIO) { - void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; - - /* clear start/stop bit */ - writeb(readb(mmio + ATA_DMA_CMD) & ~ATA_DMA_START, - mmio + ATA_DMA_CMD); - } else { - /* clear start/stop bit */ - outb(inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD) & ~ATA_DMA_START, - ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - } - - /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ - ata_altstatus(ap); /* dummy read */ -} - -/** - * ata_bmdma_freeze - Freeze BMDMA controller port - * @ap: port to freeze - * - * Freeze BMDMA controller port. - * - * LOCKING: - * Inherited from caller. - */ -void ata_bmdma_freeze(struct ata_port *ap) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - ap->ctl |= ATA_NIEN; - ap->last_ctl = ap->ctl; - - if (ap->flags & ATA_FLAG_MMIO) - writeb(ap->ctl, (void __iomem *)ioaddr->ctl_addr); - else - outb(ap->ctl, ioaddr->ctl_addr); -} - -/** - * ata_bmdma_thaw - Thaw BMDMA controller port - * @ap: port to thaw - * - * Thaw BMDMA controller port. - * - * LOCKING: - * Inherited from caller. - */ -void ata_bmdma_thaw(struct ata_port *ap) -{ - /* clear & re-enable interrupts */ - ata_chk_status(ap); - ap->ops->irq_clear(ap); - if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */ - ata_irq_on(ap); -} - -/** - * ata_bmdma_drive_eh - Perform EH with given methods for BMDMA controller - * @ap: port to handle error for - * @prereset: prereset method (can be NULL) - * @softreset: softreset method (can be NULL) - * @hardreset: hardreset method (can be NULL) - * @postreset: postreset method (can be NULL) - * - * Handle error for ATA BMDMA controller. It can handle both - * PATA and SATA controllers. Many controllers should be able to - * use this EH as-is or with some added handling before and - * after. - * - * This function is intended to be used for constructing - * ->error_handler callback by low level drivers. - * - * LOCKING: - * Kernel thread context (may sleep) - */ -void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset, - ata_reset_fn_t softreset, ata_reset_fn_t hardreset, - ata_postreset_fn_t postreset) -{ - struct ata_eh_context *ehc = &ap->eh_context; - struct ata_queued_cmd *qc; - unsigned long flags; - int thaw = 0; - - qc = __ata_qc_from_tag(ap, ap->active_tag); - if (qc && !(qc->flags & ATA_QCFLAG_FAILED)) - qc = NULL; - - /* reset PIO HSM and stop DMA engine */ - spin_lock_irqsave(ap->lock, flags); - - ap->hsm_task_state = HSM_ST_IDLE; - - if (qc && (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_DMA)) { - u8 host_stat; - - host_stat = ata_bmdma_status(ap); - - ata_ehi_push_desc(&ehc->i, "BMDMA stat 0x%x", host_stat); - - /* BMDMA controllers indicate host bus error by - * setting DMA_ERR bit and timing out. As it wasn't - * really a timeout event, adjust error mask and - * cancel frozen state. - */ - if (qc->err_mask == AC_ERR_TIMEOUT && host_stat & ATA_DMA_ERR) { - qc->err_mask = AC_ERR_HOST_BUS; - thaw = 1; - } - - ap->ops->bmdma_stop(qc); - } - - ata_altstatus(ap); - ata_chk_status(ap); - ap->ops->irq_clear(ap); - - spin_unlock_irqrestore(ap->lock, flags); - - if (thaw) - ata_eh_thaw_port(ap); - - /* PIO and DMA engines have been stopped, perform recovery */ - ata_do_eh(ap, prereset, softreset, hardreset, postreset); -} - -/** - * ata_bmdma_error_handler - Stock error handler for BMDMA controller - * @ap: port to handle error for - * - * Stock error handler for BMDMA controller. - * - * LOCKING: - * Kernel thread context (may sleep) - */ -void ata_bmdma_error_handler(struct ata_port *ap) -{ - ata_reset_fn_t hardreset; - - hardreset = NULL; - if (sata_scr_valid(ap)) - hardreset = sata_std_hardreset; - - ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, hardreset, - ata_std_postreset); -} - -/** - * ata_bmdma_post_internal_cmd - Stock post_internal_cmd for - * BMDMA controller - * @qc: internal command to clean up - * - * LOCKING: - * Kernel thread context (may sleep) - */ -void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc) -{ - ata_bmdma_stop(qc); -} - -#ifdef CONFIG_PCI -/** - * ata_pci_init_native_mode - Initialize native-mode driver - * @pdev: pci device to be initialized - * @port: array[2] of pointers to port info structures. - * @ports: bitmap of ports present - * - * Utility function which allocates and initializes an - * ata_probe_ent structure for a standard dual-port - * PIO-based IDE controller. The returned ata_probe_ent - * structure can be passed to ata_device_add(). The returned - * ata_probe_ent structure should then be freed with kfree(). - * - * The caller need only pass the address of the primary port, the - * secondary will be deduced automatically. If the device has non - * standard secondary port mappings this function can be called twice, - * once for each interface. - */ - -struct ata_probe_ent * -ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports) -{ - struct ata_probe_ent *probe_ent = - ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); - int p = 0; - unsigned long bmdma; - - if (!probe_ent) - return NULL; - - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = IRQF_SHARED; - probe_ent->private_data = port[0]->private_data; - - if (ports & ATA_PORT_PRIMARY) { - probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 0); - probe_ent->port[p].altstatus_addr = - probe_ent->port[p].ctl_addr = - pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS; - bmdma = pci_resource_start(pdev, 4); - if (bmdma) { - if (inb(bmdma + 2) & 0x80) - probe_ent->_host_flags |= ATA_HOST_SIMPLEX; - probe_ent->port[p].bmdma_addr = bmdma; - } - ata_std_ports(&probe_ent->port[p]); - p++; - } - - if (ports & ATA_PORT_SECONDARY) { - probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 2); - probe_ent->port[p].altstatus_addr = - probe_ent->port[p].ctl_addr = - pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS; - bmdma = pci_resource_start(pdev, 4); - if (bmdma) { - bmdma += 8; - if(inb(bmdma + 2) & 0x80) - probe_ent->_host_flags |= ATA_HOST_SIMPLEX; - probe_ent->port[p].bmdma_addr = bmdma; - } - ata_std_ports(&probe_ent->port[p]); - p++; - } - - probe_ent->n_ports = p; - return probe_ent; -} - - -static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, - struct ata_port_info **port, int port_mask) -{ - struct ata_probe_ent *probe_ent; - unsigned long bmdma = pci_resource_start(pdev, 4); - - probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); - if (!probe_ent) - return NULL; - - probe_ent->n_ports = 2; - probe_ent->private_data = port[0]->private_data; - - if (port_mask & ATA_PORT_PRIMARY) { - probe_ent->irq = 14; - probe_ent->port[0].cmd_addr = ATA_PRIMARY_CMD; - probe_ent->port[0].altstatus_addr = - probe_ent->port[0].ctl_addr = ATA_PRIMARY_CTL; - if (bmdma) { - probe_ent->port[0].bmdma_addr = bmdma; - if (inb(bmdma + 2) & 0x80) - probe_ent->_host_flags |= ATA_HOST_SIMPLEX; - } - ata_std_ports(&probe_ent->port[0]); - } else - probe_ent->dummy_port_mask |= ATA_PORT_PRIMARY; - - if (port_mask & ATA_PORT_SECONDARY) { - if (probe_ent->irq) - probe_ent->irq2 = 15; - else - probe_ent->irq = 15; - probe_ent->port[1].cmd_addr = ATA_SECONDARY_CMD; - probe_ent->port[1].altstatus_addr = - probe_ent->port[1].ctl_addr = ATA_SECONDARY_CTL; - if (bmdma) { - probe_ent->port[1].bmdma_addr = bmdma + 8; - if (inb(bmdma + 10) & 0x80) - probe_ent->_host_flags |= ATA_HOST_SIMPLEX; - } - ata_std_ports(&probe_ent->port[1]); - } else - probe_ent->dummy_port_mask |= ATA_PORT_SECONDARY; - - return probe_ent; -} - - -/** - * ata_pci_init_one - Initialize/register PCI IDE host controller - * @pdev: Controller to be initialized - * @port_info: Information from low-level host driver - * @n_ports: Number of ports attached to host controller - * - * This is a helper function which can be called from a driver's - * xxx_init_one() probe function if the hardware uses traditional - * IDE taskfile registers. - * - * This function calls pci_enable_device(), reserves its register - * regions, sets the dma mask, enables bus master mode, and calls - * ata_device_add() - * - * ASSUMPTION: - * Nobody makes a single channel controller that appears solely as - * the secondary legacy port on PCI. - * - * LOCKING: - * Inherited from PCI layer (may sleep). - * - * RETURNS: - * Zero on success, negative on errno-based value on error. - */ - -int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, - unsigned int n_ports) -{ - struct ata_probe_ent *probe_ent = NULL; - struct ata_port_info *port[2]; - u8 tmp8, mask; - unsigned int legacy_mode = 0; - int disable_dev_on_err = 1; - int rc; - - DPRINTK("ENTER\n"); - - port[0] = port_info[0]; - if (n_ports > 1) - port[1] = port_info[1]; - else - port[1] = port[0]; - - if ((port[0]->flags & ATA_FLAG_NO_LEGACY) == 0 - && (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { - /* TODO: What if one channel is in native mode ... */ - pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); - mask = (1 << 2) | (1 << 0); - if ((tmp8 & mask) != mask) - legacy_mode = (1 << 3); - } - - /* FIXME... */ - if ((!legacy_mode) && (n_ports > 2)) { - printk(KERN_ERR "ata: BUG: native mode, n_ports > 2\n"); - n_ports = 2; - /* For now */ - } - - /* FIXME: Really for ATA it isn't safe because the device may be - multi-purpose and we want to leave it alone if it was already - enabled. Secondly for shared use as Arjan says we want refcounting - - Checking dev->is_enabled is insufficient as this is not set at - boot for the primary video which is BIOS enabled - */ - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - disable_dev_on_err = 0; - goto err_out; - } - - if (legacy_mode) { - if (!request_region(ATA_PRIMARY_CMD, 8, "libata")) { - struct resource *conflict, res; - res.start = ATA_PRIMARY_CMD; - res.end = ATA_PRIMARY_CMD + 8 - 1; - conflict = ____request_resource(&ioport_resource, &res); - if (!strcmp(conflict->name, "libata")) - legacy_mode |= ATA_PORT_PRIMARY; - else { - disable_dev_on_err = 0; - printk(KERN_WARNING "ata: 0x%0X IDE port busy\n", ATA_PRIMARY_CMD); - } - } else - legacy_mode |= ATA_PORT_PRIMARY; - - if (!request_region(ATA_SECONDARY_CMD, 8, "libata")) { - struct resource *conflict, res; - res.start = ATA_SECONDARY_CMD; - res.end = ATA_SECONDARY_CMD + 8 - 1; - conflict = ____request_resource(&ioport_resource, &res); - if (!strcmp(conflict->name, "libata")) - legacy_mode |= ATA_PORT_SECONDARY; - else { - disable_dev_on_err = 0; - printk(KERN_WARNING "ata: 0x%X IDE port busy\n", ATA_SECONDARY_CMD); - } - } else - legacy_mode |= ATA_PORT_SECONDARY; - } - - /* we have legacy mode, but all ports are unavailable */ - if (legacy_mode == (1 << 3)) { - rc = -EBUSY; - goto err_out_regions; - } - - /* FIXME: If we get no DMA mask we should fall back to PIO */ - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - - if (legacy_mode) { - probe_ent = ata_pci_init_legacy_port(pdev, port, legacy_mode); - } else { - if (n_ports == 2) - probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); - else - probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY); - } - if (!probe_ent) { - rc = -ENOMEM; - goto err_out_regions; - } - - pci_set_master(pdev); - - /* FIXME: check ata_device_add return */ - ata_device_add(probe_ent); - - kfree(probe_ent); - - return 0; - -err_out_regions: - if (legacy_mode & ATA_PORT_PRIMARY) - release_region(ATA_PRIMARY_CMD, 8); - if (legacy_mode & ATA_PORT_SECONDARY) - release_region(ATA_SECONDARY_CMD, 8); - pci_release_regions(pdev); -err_out: - if (disable_dev_on_err) - pci_disable_device(pdev); - return rc; -} - -/** - * ata_pci_clear_simplex - attempt to kick device out of simplex - * @pdev: PCI device - * - * Some PCI ATA devices report simplex mode but in fact can be told to - * enter non simplex mode. This implements the neccessary logic to - * perform the task on such devices. Calling it on other devices will - * have -undefined- behaviour. - */ - -int ata_pci_clear_simplex(struct pci_dev *pdev) -{ - unsigned long bmdma = pci_resource_start(pdev, 4); - u8 simplex; - - if (bmdma == 0) - return -ENOENT; - - simplex = inb(bmdma + 0x02); - outb(simplex & 0x60, bmdma + 0x02); - simplex = inb(bmdma + 0x02); - if (simplex & 0x80) - return -EOPNOTSUPP; - return 0; -} - -unsigned long ata_pci_default_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long xfer_mask) -{ - /* Filter out DMA modes if the device has been configured by - the BIOS as PIO only */ - - if (ap->ioaddr.bmdma_addr == 0) - xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); - return xfer_mask; -} - -#endif /* CONFIG_PCI */ - diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c new file mode 100644 index 00000000000..76050285982 --- /dev/null +++ b/drivers/ata/libata-sff.c @@ -0,0 +1,1109 @@ +/* + * libata-bmdma.c - helper library for PCI IDE BMDMA + * + * Maintained by: Jeff Garzik + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003-2006 Red Hat, Inc. All rights reserved. + * Copyright 2003-2006 Jeff Garzik + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available from http://www.t13.org/ and + * http://www.sata-io.org/ + * + */ + +#include +#include +#include + +#include "libata.h" + +/** + * ata_tf_load_pio - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_tf_load_pio(struct ata_port *ap, const struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + + if (tf->ctl != ap->last_ctl) { + outb(tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + } + + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + outb(tf->hob_feature, ioaddr->feature_addr); + outb(tf->hob_nsect, ioaddr->nsect_addr); + outb(tf->hob_lbal, ioaddr->lbal_addr); + outb(tf->hob_lbam, ioaddr->lbam_addr); + outb(tf->hob_lbah, ioaddr->lbah_addr); + VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", + tf->hob_feature, + tf->hob_nsect, + tf->hob_lbal, + tf->hob_lbam, + tf->hob_lbah); + } + + if (is_addr) { + outb(tf->feature, ioaddr->feature_addr); + outb(tf->nsect, ioaddr->nsect_addr); + outb(tf->lbal, ioaddr->lbal_addr); + outb(tf->lbam, ioaddr->lbam_addr); + outb(tf->lbah, ioaddr->lbah_addr); + VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", + tf->feature, + tf->nsect, + tf->lbal, + tf->lbam, + tf->lbah); + } + + if (tf->flags & ATA_TFLAG_DEVICE) { + outb(tf->device, ioaddr->device_addr); + VPRINTK("device 0x%X\n", tf->device); + } + + ata_wait_idle(ap); +} + +/** + * ata_tf_load_mmio - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller using MMIO. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + + if (tf->ctl != ap->last_ctl) { + writeb(tf->ctl, (void __iomem *) ap->ioaddr.ctl_addr); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + } + + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + writeb(tf->hob_feature, (void __iomem *) ioaddr->feature_addr); + writeb(tf->hob_nsect, (void __iomem *) ioaddr->nsect_addr); + writeb(tf->hob_lbal, (void __iomem *) ioaddr->lbal_addr); + writeb(tf->hob_lbam, (void __iomem *) ioaddr->lbam_addr); + writeb(tf->hob_lbah, (void __iomem *) ioaddr->lbah_addr); + VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", + tf->hob_feature, + tf->hob_nsect, + tf->hob_lbal, + tf->hob_lbam, + tf->hob_lbah); + } + + if (is_addr) { + writeb(tf->feature, (void __iomem *) ioaddr->feature_addr); + writeb(tf->nsect, (void __iomem *) ioaddr->nsect_addr); + writeb(tf->lbal, (void __iomem *) ioaddr->lbal_addr); + writeb(tf->lbam, (void __iomem *) ioaddr->lbam_addr); + writeb(tf->lbah, (void __iomem *) ioaddr->lbah_addr); + VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", + tf->feature, + tf->nsect, + tf->lbal, + tf->lbam, + tf->lbah); + } + + if (tf->flags & ATA_TFLAG_DEVICE) { + writeb(tf->device, (void __iomem *) ioaddr->device_addr); + VPRINTK("device 0x%X\n", tf->device); + } + + ata_wait_idle(ap); +} + + +/** + * ata_tf_load - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller using MMIO + * or PIO as indicated by the ATA_FLAG_MMIO flag. + * Writes the control, feature, nsect, lbal, lbam, and lbah registers. + * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect, + * hob_lbal, hob_lbam, and hob_lbah. + * + * This function waits for idle (!BUSY and !DRQ) after writing + * registers. If the control register has a new value, this + * function also waits for idle after writing control and before + * writing the remaining registers. + * + * May be used as the tf_load() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) +{ + if (ap->flags & ATA_FLAG_MMIO) + ata_tf_load_mmio(ap, tf); + else + ata_tf_load_pio(ap, tf); +} + +/** + * ata_exec_command_pio - issue ATA command to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues PIO write to ATA command register, with proper + * synchronization with interrupt handler / other threads. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ + +static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf) +{ + DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); + + outb(tf->command, ap->ioaddr.command_addr); + ata_pause(ap); +} + + +/** + * ata_exec_command_mmio - issue ATA command to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues MMIO write to ATA command register, with proper + * synchronization with interrupt handler / other threads. + * + * FIXME: missing write posting for 400nS delay enforcement + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ + +static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) +{ + DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); + + writeb(tf->command, (void __iomem *) ap->ioaddr.command_addr); + ata_pause(ap); +} + + +/** + * ata_exec_command - issue ATA command to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues PIO/MMIO write to ATA command register, with proper + * synchronization with interrupt handler / other threads. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) +{ + if (ap->flags & ATA_FLAG_MMIO) + ata_exec_command_mmio(ap, tf); + else + ata_exec_command_pio(ap, tf); +} + +/** + * ata_tf_read_pio - input device's ATA taskfile shadow registers + * @ap: Port from which input is read + * @tf: ATA taskfile register set for storing input + * + * Reads ATA taskfile registers for currently-selected device + * into @tf. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_tf_read_pio(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + tf->command = ata_check_status(ap); + tf->feature = inb(ioaddr->error_addr); + tf->nsect = inb(ioaddr->nsect_addr); + tf->lbal = inb(ioaddr->lbal_addr); + tf->lbam = inb(ioaddr->lbam_addr); + tf->lbah = inb(ioaddr->lbah_addr); + tf->device = inb(ioaddr->device_addr); + + if (tf->flags & ATA_TFLAG_LBA48) { + outb(tf->ctl | ATA_HOB, ioaddr->ctl_addr); + tf->hob_feature = inb(ioaddr->error_addr); + tf->hob_nsect = inb(ioaddr->nsect_addr); + tf->hob_lbal = inb(ioaddr->lbal_addr); + tf->hob_lbam = inb(ioaddr->lbam_addr); + tf->hob_lbah = inb(ioaddr->lbah_addr); + } +} + +/** + * ata_tf_read_mmio - input device's ATA taskfile shadow registers + * @ap: Port from which input is read + * @tf: ATA taskfile register set for storing input + * + * Reads ATA taskfile registers for currently-selected device + * into @tf via MMIO. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + tf->command = ata_check_status(ap); + tf->feature = readb((void __iomem *)ioaddr->error_addr); + tf->nsect = readb((void __iomem *)ioaddr->nsect_addr); + tf->lbal = readb((void __iomem *)ioaddr->lbal_addr); + tf->lbam = readb((void __iomem *)ioaddr->lbam_addr); + tf->lbah = readb((void __iomem *)ioaddr->lbah_addr); + tf->device = readb((void __iomem *)ioaddr->device_addr); + + if (tf->flags & ATA_TFLAG_LBA48) { + writeb(tf->ctl | ATA_HOB, (void __iomem *) ap->ioaddr.ctl_addr); + tf->hob_feature = readb((void __iomem *)ioaddr->error_addr); + tf->hob_nsect = readb((void __iomem *)ioaddr->nsect_addr); + tf->hob_lbal = readb((void __iomem *)ioaddr->lbal_addr); + tf->hob_lbam = readb((void __iomem *)ioaddr->lbam_addr); + tf->hob_lbah = readb((void __iomem *)ioaddr->lbah_addr); + } +} + + +/** + * ata_tf_read - input device's ATA taskfile shadow registers + * @ap: Port from which input is read + * @tf: ATA taskfile register set for storing input + * + * Reads ATA taskfile registers for currently-selected device + * into @tf. + * + * Reads nsect, lbal, lbam, lbah, and device. If ATA_TFLAG_LBA48 + * is set, also reads the hob registers. + * + * May be used as the tf_read() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + if (ap->flags & ATA_FLAG_MMIO) + ata_tf_read_mmio(ap, tf); + else + ata_tf_read_pio(ap, tf); +} + +/** + * ata_check_status_pio - Read device status reg & clear interrupt + * @ap: port where the device is + * + * Reads ATA taskfile status register for currently-selected device + * and return its value. This also clears pending interrupts + * from this device + * + * LOCKING: + * Inherited from caller. + */ +static u8 ata_check_status_pio(struct ata_port *ap) +{ + return inb(ap->ioaddr.status_addr); +} + +/** + * ata_check_status_mmio - Read device status reg & clear interrupt + * @ap: port where the device is + * + * Reads ATA taskfile status register for currently-selected device + * via MMIO and return its value. This also clears pending interrupts + * from this device + * + * LOCKING: + * Inherited from caller. + */ +static u8 ata_check_status_mmio(struct ata_port *ap) +{ + return readb((void __iomem *) ap->ioaddr.status_addr); +} + + +/** + * ata_check_status - Read device status reg & clear interrupt + * @ap: port where the device is + * + * Reads ATA taskfile status register for currently-selected device + * and return its value. This also clears pending interrupts + * from this device + * + * May be used as the check_status() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +u8 ata_check_status(struct ata_port *ap) +{ + if (ap->flags & ATA_FLAG_MMIO) + return ata_check_status_mmio(ap); + return ata_check_status_pio(ap); +} + + +/** + * ata_altstatus - Read device alternate status reg + * @ap: port where the device is + * + * Reads ATA taskfile alternate status register for + * currently-selected device and return its value. + * + * Note: may NOT be used as the check_altstatus() entry in + * ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +u8 ata_altstatus(struct ata_port *ap) +{ + if (ap->ops->check_altstatus) + return ap->ops->check_altstatus(ap); + + if (ap->flags & ATA_FLAG_MMIO) + return readb((void __iomem *)ap->ioaddr.altstatus_addr); + return inb(ap->ioaddr.altstatus_addr); +} + +/** + * ata_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction + * @qc: Info associated with this ATA transaction. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ + +static void ata_bmdma_setup_mmio (struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); + u8 dmactl; + void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; + + /* load PRD table addr. */ + mb(); /* make sure PRD table writes are visible to controller */ + writel(ap->prd_dma, mmio + ATA_DMA_TABLE_OFS); + + /* specify data direction, triple-check start bit is clear */ + dmactl = readb(mmio + ATA_DMA_CMD); + dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); + if (!rw) + dmactl |= ATA_DMA_WR; + writeb(dmactl, mmio + ATA_DMA_CMD); + + /* issue r/w command */ + ap->ops->exec_command(ap, &qc->tf); +} + +/** + * ata_bmdma_start_mmio - Start a PCI IDE BMDMA transaction + * @qc: Info associated with this ATA transaction. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ + +static void ata_bmdma_start_mmio (struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; + u8 dmactl; + + /* start host DMA transaction */ + dmactl = readb(mmio + ATA_DMA_CMD); + writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD); + + /* Strictly, one may wish to issue a readb() here, to + * flush the mmio write. However, control also passes + * to the hardware at this point, and it will interrupt + * us when we are to resume control. So, in effect, + * we don't care when the mmio write flushes. + * Further, a read of the DMA status register _immediately_ + * following the write may not be what certain flaky hardware + * is expected, so I think it is best to not add a readb() + * without first all the MMIO ATA cards/mobos. + * Or maybe I'm just being paranoid. + */ +} + +/** + * ata_bmdma_setup_pio - Set up PCI IDE BMDMA transaction (PIO) + * @qc: Info associated with this ATA transaction. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ + +static void ata_bmdma_setup_pio (struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); + u8 dmactl; + + /* load PRD table addr. */ + outl(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS); + + /* specify data direction, triple-check start bit is clear */ + dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); + if (!rw) + dmactl |= ATA_DMA_WR; + outb(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + + /* issue r/w command */ + ap->ops->exec_command(ap, &qc->tf); +} + +/** + * ata_bmdma_start_pio - Start a PCI IDE BMDMA transaction (PIO) + * @qc: Info associated with this ATA transaction. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ + +static void ata_bmdma_start_pio (struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + u8 dmactl; + + /* start host DMA transaction */ + dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + outb(dmactl | ATA_DMA_START, + ap->ioaddr.bmdma_addr + ATA_DMA_CMD); +} + + +/** + * ata_bmdma_start - Start a PCI IDE BMDMA transaction + * @qc: Info associated with this ATA transaction. + * + * Writes the ATA_DMA_START flag to the DMA command register. + * + * May be used as the bmdma_start() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_bmdma_start(struct ata_queued_cmd *qc) +{ + if (qc->ap->flags & ATA_FLAG_MMIO) + ata_bmdma_start_mmio(qc); + else + ata_bmdma_start_pio(qc); +} + + +/** + * ata_bmdma_setup - Set up PCI IDE BMDMA transaction + * @qc: Info associated with this ATA transaction. + * + * Writes address of PRD table to device's PRD Table Address + * register, sets the DMA control register, and calls + * ops->exec_command() to start the transfer. + * + * May be used as the bmdma_setup() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_bmdma_setup(struct ata_queued_cmd *qc) +{ + if (qc->ap->flags & ATA_FLAG_MMIO) + ata_bmdma_setup_mmio(qc); + else + ata_bmdma_setup_pio(qc); +} + + +/** + * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt. + * @ap: Port associated with this ATA transaction. + * + * Clear interrupt and error flags in DMA status register. + * + * May be used as the irq_clear() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ + +void ata_bmdma_irq_clear(struct ata_port *ap) +{ + if (!ap->ioaddr.bmdma_addr) + return; + + if (ap->flags & ATA_FLAG_MMIO) { + void __iomem *mmio = + ((void __iomem *) ap->ioaddr.bmdma_addr) + ATA_DMA_STATUS; + writeb(readb(mmio), mmio); + } else { + unsigned long addr = ap->ioaddr.bmdma_addr + ATA_DMA_STATUS; + outb(inb(addr), addr); + } +} + + +/** + * ata_bmdma_status - Read PCI IDE BMDMA status + * @ap: Port associated with this ATA transaction. + * + * Read and return BMDMA status register. + * + * May be used as the bmdma_status() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ + +u8 ata_bmdma_status(struct ata_port *ap) +{ + u8 host_stat; + if (ap->flags & ATA_FLAG_MMIO) { + void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; + host_stat = readb(mmio + ATA_DMA_STATUS); + } else + host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + return host_stat; +} + + +/** + * ata_bmdma_stop - Stop PCI IDE BMDMA transfer + * @qc: Command we are ending DMA for + * + * Clears the ATA_DMA_START flag in the dma control register + * + * May be used as the bmdma_stop() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ + +void ata_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + if (ap->flags & ATA_FLAG_MMIO) { + void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; + + /* clear start/stop bit */ + writeb(readb(mmio + ATA_DMA_CMD) & ~ATA_DMA_START, + mmio + ATA_DMA_CMD); + } else { + /* clear start/stop bit */ + outb(inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD) & ~ATA_DMA_START, + ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + } + + /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ + ata_altstatus(ap); /* dummy read */ +} + +/** + * ata_bmdma_freeze - Freeze BMDMA controller port + * @ap: port to freeze + * + * Freeze BMDMA controller port. + * + * LOCKING: + * Inherited from caller. + */ +void ata_bmdma_freeze(struct ata_port *ap) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + ap->ctl |= ATA_NIEN; + ap->last_ctl = ap->ctl; + + if (ap->flags & ATA_FLAG_MMIO) + writeb(ap->ctl, (void __iomem *)ioaddr->ctl_addr); + else + outb(ap->ctl, ioaddr->ctl_addr); +} + +/** + * ata_bmdma_thaw - Thaw BMDMA controller port + * @ap: port to thaw + * + * Thaw BMDMA controller port. + * + * LOCKING: + * Inherited from caller. + */ +void ata_bmdma_thaw(struct ata_port *ap) +{ + /* clear & re-enable interrupts */ + ata_chk_status(ap); + ap->ops->irq_clear(ap); + if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */ + ata_irq_on(ap); +} + +/** + * ata_bmdma_drive_eh - Perform EH with given methods for BMDMA controller + * @ap: port to handle error for + * @prereset: prereset method (can be NULL) + * @softreset: softreset method (can be NULL) + * @hardreset: hardreset method (can be NULL) + * @postreset: postreset method (can be NULL) + * + * Handle error for ATA BMDMA controller. It can handle both + * PATA and SATA controllers. Many controllers should be able to + * use this EH as-is or with some added handling before and + * after. + * + * This function is intended to be used for constructing + * ->error_handler callback by low level drivers. + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset, + ata_reset_fn_t softreset, ata_reset_fn_t hardreset, + ata_postreset_fn_t postreset) +{ + struct ata_eh_context *ehc = &ap->eh_context; + struct ata_queued_cmd *qc; + unsigned long flags; + int thaw = 0; + + qc = __ata_qc_from_tag(ap, ap->active_tag); + if (qc && !(qc->flags & ATA_QCFLAG_FAILED)) + qc = NULL; + + /* reset PIO HSM and stop DMA engine */ + spin_lock_irqsave(ap->lock, flags); + + ap->hsm_task_state = HSM_ST_IDLE; + + if (qc && (qc->tf.protocol == ATA_PROT_DMA || + qc->tf.protocol == ATA_PROT_ATAPI_DMA)) { + u8 host_stat; + + host_stat = ata_bmdma_status(ap); + + ata_ehi_push_desc(&ehc->i, "BMDMA stat 0x%x", host_stat); + + /* BMDMA controllers indicate host bus error by + * setting DMA_ERR bit and timing out. As it wasn't + * really a timeout event, adjust error mask and + * cancel frozen state. + */ + if (qc->err_mask == AC_ERR_TIMEOUT && host_stat & ATA_DMA_ERR) { + qc->err_mask = AC_ERR_HOST_BUS; + thaw = 1; + } + + ap->ops->bmdma_stop(qc); + } + + ata_altstatus(ap); + ata_chk_status(ap); + ap->ops->irq_clear(ap); + + spin_unlock_irqrestore(ap->lock, flags); + + if (thaw) + ata_eh_thaw_port(ap); + + /* PIO and DMA engines have been stopped, perform recovery */ + ata_do_eh(ap, prereset, softreset, hardreset, postreset); +} + +/** + * ata_bmdma_error_handler - Stock error handler for BMDMA controller + * @ap: port to handle error for + * + * Stock error handler for BMDMA controller. + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_bmdma_error_handler(struct ata_port *ap) +{ + ata_reset_fn_t hardreset; + + hardreset = NULL; + if (sata_scr_valid(ap)) + hardreset = sata_std_hardreset; + + ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, hardreset, + ata_std_postreset); +} + +/** + * ata_bmdma_post_internal_cmd - Stock post_internal_cmd for + * BMDMA controller + * @qc: internal command to clean up + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc) +{ + ata_bmdma_stop(qc); +} + +#ifdef CONFIG_PCI +/** + * ata_pci_init_native_mode - Initialize native-mode driver + * @pdev: pci device to be initialized + * @port: array[2] of pointers to port info structures. + * @ports: bitmap of ports present + * + * Utility function which allocates and initializes an + * ata_probe_ent structure for a standard dual-port + * PIO-based IDE controller. The returned ata_probe_ent + * structure can be passed to ata_device_add(). The returned + * ata_probe_ent structure should then be freed with kfree(). + * + * The caller need only pass the address of the primary port, the + * secondary will be deduced automatically. If the device has non + * standard secondary port mappings this function can be called twice, + * once for each interface. + */ + +struct ata_probe_ent * +ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports) +{ + struct ata_probe_ent *probe_ent = + ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); + int p = 0; + unsigned long bmdma; + + if (!probe_ent) + return NULL; + + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = IRQF_SHARED; + probe_ent->private_data = port[0]->private_data; + + if (ports & ATA_PORT_PRIMARY) { + probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 0); + probe_ent->port[p].altstatus_addr = + probe_ent->port[p].ctl_addr = + pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS; + bmdma = pci_resource_start(pdev, 4); + if (bmdma) { + if (inb(bmdma + 2) & 0x80) + probe_ent->_host_flags |= ATA_HOST_SIMPLEX; + probe_ent->port[p].bmdma_addr = bmdma; + } + ata_std_ports(&probe_ent->port[p]); + p++; + } + + if (ports & ATA_PORT_SECONDARY) { + probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 2); + probe_ent->port[p].altstatus_addr = + probe_ent->port[p].ctl_addr = + pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS; + bmdma = pci_resource_start(pdev, 4); + if (bmdma) { + bmdma += 8; + if(inb(bmdma + 2) & 0x80) + probe_ent->_host_flags |= ATA_HOST_SIMPLEX; + probe_ent->port[p].bmdma_addr = bmdma; + } + ata_std_ports(&probe_ent->port[p]); + p++; + } + + probe_ent->n_ports = p; + return probe_ent; +} + + +static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, + struct ata_port_info **port, int port_mask) +{ + struct ata_probe_ent *probe_ent; + unsigned long bmdma = pci_resource_start(pdev, 4); + + probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); + if (!probe_ent) + return NULL; + + probe_ent->n_ports = 2; + probe_ent->private_data = port[0]->private_data; + + if (port_mask & ATA_PORT_PRIMARY) { + probe_ent->irq = 14; + probe_ent->port[0].cmd_addr = ATA_PRIMARY_CMD; + probe_ent->port[0].altstatus_addr = + probe_ent->port[0].ctl_addr = ATA_PRIMARY_CTL; + if (bmdma) { + probe_ent->port[0].bmdma_addr = bmdma; + if (inb(bmdma + 2) & 0x80) + probe_ent->_host_flags |= ATA_HOST_SIMPLEX; + } + ata_std_ports(&probe_ent->port[0]); + } else + probe_ent->dummy_port_mask |= ATA_PORT_PRIMARY; + + if (port_mask & ATA_PORT_SECONDARY) { + if (probe_ent->irq) + probe_ent->irq2 = 15; + else + probe_ent->irq = 15; + probe_ent->port[1].cmd_addr = ATA_SECONDARY_CMD; + probe_ent->port[1].altstatus_addr = + probe_ent->port[1].ctl_addr = ATA_SECONDARY_CTL; + if (bmdma) { + probe_ent->port[1].bmdma_addr = bmdma + 8; + if (inb(bmdma + 10) & 0x80) + probe_ent->_host_flags |= ATA_HOST_SIMPLEX; + } + ata_std_ports(&probe_ent->port[1]); + } else + probe_ent->dummy_port_mask |= ATA_PORT_SECONDARY; + + return probe_ent; +} + + +/** + * ata_pci_init_one - Initialize/register PCI IDE host controller + * @pdev: Controller to be initialized + * @port_info: Information from low-level host driver + * @n_ports: Number of ports attached to host controller + * + * This is a helper function which can be called from a driver's + * xxx_init_one() probe function if the hardware uses traditional + * IDE taskfile registers. + * + * This function calls pci_enable_device(), reserves its register + * regions, sets the dma mask, enables bus master mode, and calls + * ata_device_add() + * + * ASSUMPTION: + * Nobody makes a single channel controller that appears solely as + * the secondary legacy port on PCI. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, negative on errno-based value on error. + */ + +int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, + unsigned int n_ports) +{ + struct ata_probe_ent *probe_ent = NULL; + struct ata_port_info *port[2]; + u8 tmp8, mask; + unsigned int legacy_mode = 0; + int disable_dev_on_err = 1; + int rc; + + DPRINTK("ENTER\n"); + + port[0] = port_info[0]; + if (n_ports > 1) + port[1] = port_info[1]; + else + port[1] = port[0]; + + if ((port[0]->flags & ATA_FLAG_NO_LEGACY) == 0 + && (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { + /* TODO: What if one channel is in native mode ... */ + pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); + mask = (1 << 2) | (1 << 0); + if ((tmp8 & mask) != mask) + legacy_mode = (1 << 3); + } + + /* FIXME... */ + if ((!legacy_mode) && (n_ports > 2)) { + printk(KERN_ERR "ata: BUG: native mode, n_ports > 2\n"); + n_ports = 2; + /* For now */ + } + + /* FIXME: Really for ATA it isn't safe because the device may be + multi-purpose and we want to leave it alone if it was already + enabled. Secondly for shared use as Arjan says we want refcounting + + Checking dev->is_enabled is insufficient as this is not set at + boot for the primary video which is BIOS enabled + */ + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) { + disable_dev_on_err = 0; + goto err_out; + } + + if (legacy_mode) { + if (!request_region(ATA_PRIMARY_CMD, 8, "libata")) { + struct resource *conflict, res; + res.start = ATA_PRIMARY_CMD; + res.end = ATA_PRIMARY_CMD + 8 - 1; + conflict = ____request_resource(&ioport_resource, &res); + if (!strcmp(conflict->name, "libata")) + legacy_mode |= ATA_PORT_PRIMARY; + else { + disable_dev_on_err = 0; + printk(KERN_WARNING "ata: 0x%0X IDE port busy\n", ATA_PRIMARY_CMD); + } + } else + legacy_mode |= ATA_PORT_PRIMARY; + + if (!request_region(ATA_SECONDARY_CMD, 8, "libata")) { + struct resource *conflict, res; + res.start = ATA_SECONDARY_CMD; + res.end = ATA_SECONDARY_CMD + 8 - 1; + conflict = ____request_resource(&ioport_resource, &res); + if (!strcmp(conflict->name, "libata")) + legacy_mode |= ATA_PORT_SECONDARY; + else { + disable_dev_on_err = 0; + printk(KERN_WARNING "ata: 0x%X IDE port busy\n", ATA_SECONDARY_CMD); + } + } else + legacy_mode |= ATA_PORT_SECONDARY; + } + + /* we have legacy mode, but all ports are unavailable */ + if (legacy_mode == (1 << 3)) { + rc = -EBUSY; + goto err_out_regions; + } + + /* FIXME: If we get no DMA mask we should fall back to PIO */ + rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + + if (legacy_mode) { + probe_ent = ata_pci_init_legacy_port(pdev, port, legacy_mode); + } else { + if (n_ports == 2) + probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); + else + probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY); + } + if (!probe_ent) { + rc = -ENOMEM; + goto err_out_regions; + } + + pci_set_master(pdev); + + /* FIXME: check ata_device_add return */ + ata_device_add(probe_ent); + + kfree(probe_ent); + + return 0; + +err_out_regions: + if (legacy_mode & ATA_PORT_PRIMARY) + release_region(ATA_PRIMARY_CMD, 8); + if (legacy_mode & ATA_PORT_SECONDARY) + release_region(ATA_SECONDARY_CMD, 8); + pci_release_regions(pdev); +err_out: + if (disable_dev_on_err) + pci_disable_device(pdev); + return rc; +} + +/** + * ata_pci_clear_simplex - attempt to kick device out of simplex + * @pdev: PCI device + * + * Some PCI ATA devices report simplex mode but in fact can be told to + * enter non simplex mode. This implements the neccessary logic to + * perform the task on such devices. Calling it on other devices will + * have -undefined- behaviour. + */ + +int ata_pci_clear_simplex(struct pci_dev *pdev) +{ + unsigned long bmdma = pci_resource_start(pdev, 4); + u8 simplex; + + if (bmdma == 0) + return -ENOENT; + + simplex = inb(bmdma + 0x02); + outb(simplex & 0x60, bmdma + 0x02); + simplex = inb(bmdma + 0x02); + if (simplex & 0x80) + return -EOPNOTSUPP; + return 0; +} + +unsigned long ata_pci_default_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long xfer_mask) +{ + /* Filter out DMA modes if the device has been configured by + the BIOS as PIO only */ + + if (ap->ioaddr.bmdma_addr == 0) + xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + return xfer_mask; +} + +#endif /* CONFIG_PCI */ + -- cgit v1.2.3 From 669a5db411d85a14f86cd92bc16bf7ab5b8aa235 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 29 Aug 2006 18:12:40 -0400 Subject: [libata] Add a bunch of PATA drivers. The vast majority of drivers and changes are from Alan Cox. Albert Lee contributed and maintains pata_pdc2027x. Adrian Bunk, Andrew Morton, and Tejun Heo contributed various minor fixes and updates. Signed-off-by: Jeff Garzik --- drivers/ata/Kconfig | 334 +++++++++++ drivers/ata/Makefile | 41 ++ drivers/ata/ata_generic.c | 252 ++++++++ drivers/ata/ata_piix.c | 436 ++++++++++---- drivers/ata/pata_ali.c | 679 +++++++++++++++++++++ drivers/ata/pata_amd.c | 707 ++++++++++++++++++++++ drivers/ata/pata_artop.c | 518 ++++++++++++++++ drivers/ata/pata_atiixp.c | 306 ++++++++++ drivers/ata/pata_cmd64x.c | 505 ++++++++++++++++ drivers/ata/pata_cs5520.c | 336 +++++++++++ drivers/ata/pata_cs5530.c | 387 ++++++++++++ drivers/ata/pata_cs5535.c | 291 +++++++++ drivers/ata/pata_cypress.c | 227 +++++++ drivers/ata/pata_efar.c | 342 +++++++++++ drivers/ata/pata_hpt366.c | 478 +++++++++++++++ drivers/ata/pata_hpt37x.c | 1257 +++++++++++++++++++++++++++++++++++++++ drivers/ata/pata_hpt3x2n.c | 597 +++++++++++++++++++ drivers/ata/pata_hpt3x3.c | 226 +++++++ drivers/ata/pata_isapnp.c | 156 +++++ drivers/ata/pata_it8172.c | 288 +++++++++ drivers/ata/pata_it821x.c | 847 ++++++++++++++++++++++++++ drivers/ata/pata_jmicron.c | 266 +++++++++ drivers/ata/pata_legacy.c | 949 +++++++++++++++++++++++++++++ drivers/ata/pata_mpiix.c | 313 ++++++++++ drivers/ata/pata_netcell.c | 175 ++++++ drivers/ata/pata_ns87410.c | 236 ++++++++ drivers/ata/pata_oldpiix.c | 339 +++++++++++ drivers/ata/pata_opti.c | 292 +++++++++ drivers/ata/pata_optidma.c | 547 +++++++++++++++++ drivers/ata/pata_pcmcia.c | 393 ++++++++++++ drivers/ata/pata_pdc2027x.c | 869 +++++++++++++++++++++++++++ drivers/ata/pata_pdc202xx_old.c | 423 +++++++++++++ drivers/ata/pata_qdi.c | 403 +++++++++++++ drivers/ata/pata_radisys.c | 335 +++++++++++ drivers/ata/pata_rz1000.c | 205 +++++++ drivers/ata/pata_sc1200.c | 287 +++++++++ drivers/ata/pata_serverworks.c | 587 ++++++++++++++++++ drivers/ata/pata_sil680.c | 381 ++++++++++++ drivers/ata/pata_sis.c | 1030 ++++++++++++++++++++++++++++++++ drivers/ata/pata_sl82c105.c | 388 ++++++++++++ drivers/ata/pata_triflex.c | 285 +++++++++ drivers/ata/pata_via.c | 568 ++++++++++++++++++ 42 files changed, 18371 insertions(+), 110 deletions(-) create mode 100644 drivers/ata/ata_generic.c create mode 100644 drivers/ata/pata_ali.c create mode 100644 drivers/ata/pata_amd.c create mode 100644 drivers/ata/pata_artop.c create mode 100644 drivers/ata/pata_atiixp.c create mode 100644 drivers/ata/pata_cmd64x.c create mode 100644 drivers/ata/pata_cs5520.c create mode 100644 drivers/ata/pata_cs5530.c create mode 100644 drivers/ata/pata_cs5535.c create mode 100644 drivers/ata/pata_cypress.c create mode 100644 drivers/ata/pata_efar.c create mode 100644 drivers/ata/pata_hpt366.c create mode 100644 drivers/ata/pata_hpt37x.c create mode 100644 drivers/ata/pata_hpt3x2n.c create mode 100644 drivers/ata/pata_hpt3x3.c create mode 100644 drivers/ata/pata_isapnp.c create mode 100644 drivers/ata/pata_it8172.c create mode 100644 drivers/ata/pata_it821x.c create mode 100644 drivers/ata/pata_jmicron.c create mode 100644 drivers/ata/pata_legacy.c create mode 100644 drivers/ata/pata_mpiix.c create mode 100644 drivers/ata/pata_netcell.c create mode 100644 drivers/ata/pata_ns87410.c create mode 100644 drivers/ata/pata_oldpiix.c create mode 100644 drivers/ata/pata_opti.c create mode 100644 drivers/ata/pata_optidma.c create mode 100644 drivers/ata/pata_pcmcia.c create mode 100644 drivers/ata/pata_pdc2027x.c create mode 100644 drivers/ata/pata_pdc202xx_old.c create mode 100644 drivers/ata/pata_qdi.c create mode 100644 drivers/ata/pata_radisys.c create mode 100644 drivers/ata/pata_rz1000.c create mode 100644 drivers/ata/pata_sc1200.c create mode 100644 drivers/ata/pata_serverworks.c create mode 100644 drivers/ata/pata_sil680.c create mode 100644 drivers/ata/pata_sis.c create mode 100644 drivers/ata/pata_sl82c105.c create mode 100644 drivers/ata/pata_triflex.c create mode 100644 drivers/ata/pata_via.c (limited to 'drivers') diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 13027d56b7f..cbda988692e 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -145,6 +145,340 @@ config SATA_INTEL_COMBINED depends on IDE=y && !BLK_DEV_IDE_SATA && (SATA_AHCI || ATA_PIIX) default y +config PATA_ALI + tristate "ALi PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the ALi ATA interfaces + found on the many ALi chipsets. + + If unsure, say N. + +config PATA_AMD + tristate "AMD/NVidia PATA support (Experimental)" + depends on PCI + help + This option enables support for the AMD and NVidia PATA + interfaces found on the chipsets for Athlon/Athlon64. + + If unsure, say N. + +config PATA_ARTOP + tristate "ARTOP 6210/6260 PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for ARTOP PATA controllers. + + If unsure, say N. + +config PATA_ATIIXP + tristate "ATI PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the ATI ATA interfaces + found on the many ATI chipsets. + + If unsure, say N. + +config PATA_CMD64X + tristate "CMD64x PATA support (Very Experimental)" + depends on PCI&& EXPERIMENTAL + help + This option enables support for the CMD64x series chips + except for the CMD640. + + If unsure, say N. + +config PATA_CS5520 + tristate "CS5510/5520 PATA support" + depends on PCI + help + This option enables support for the Cyrix 5510/5520 + companion chip used with the MediaGX/Geode processor family. + + If unsure, say N. + +config PATA_CS5530 + tristate "CS5530 PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the Cyrix/NatSemi/AMD CS5530 + companion chip used with the MediaGX/Geode processor family. + + If unsure, say N. + +config PATA_CS5535 + tristate "CS5535 PATA support (Experimental)" + depends on PCI && X86 && !X86_64 && EXPERIMENTAL + help + This option enables support for the NatSemi/AMD CS5535 + companion chip used with the Geode processor family. + + If unsure, say N. + +config PATA_CYPRESS + tristate "Cypress CY82C693 PATA support (Very Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the Cypress/Contaq CY82C693 + chipset found in some Alpha systems + + If unsure, say N. + +config PATA_EFAR + tristate "EFAR SLC90E66 support" + depends on PCI + help + This option enables support for the EFAR SLC90E66 + IDE controller found on some older machines. + + If unsure, say N. + +config ATA_GENERIC + tristate "Generic ATA support" + depends on PCI + help + This option enables support for generic BIOS configured + ATA controllers via the new ATA layer + + If unsure, say N. + +config PATA_HPT366 + tristate "HPT 366/368 PATA support (Very Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the HPT 366 and 368 + PATA controllers via the new ATA layer. + + If unsure, say N. + +config PATA_HPT37X + tristate "HPT 370/370A/371/372/374/302 PATA support (Very Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the majority of the later HPT + PATA controllers via the new ATA layer. + + If unsure, say N. + +config PATA_HPT3X2N + tristate "HPT 372N/302N PATA support (Very Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the N variant HPT PATA + controllers via the new ATA layer + + If unsure, say N. + +config PATA_HPT3X3 + tristate "HPT 343/363 PATA support (Experimental)" + depends on PCI + help + This option enables support for the HPT 343/363 + PATA controllers via the new ATA layer + + If unsure, say N. + +config PATA_ISAPNP + tristate "ISA Plug and Play PATA support (Very Experimental)" + depends on EXPERIMENTAL && ISAPNP + help + This option enables support for ISA plug & play ATA + controllers such as those found on old soundcards. + + If unsure, say N. + +config PATA_IT8172 + tristate "IT8172 PATA support (Very Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the ITE 8172 PATA controller + via the new ATA layer. + + If unsure, say N. + +config PATA_IT821X + tristate "IT821x PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the ITE 8211 and 8212 + PATA controllers via the new ATA layer, including RAID + mode. + + If unsure, say N. + +config PATA_LEGACY + tristate "Legacy ISA PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for ISA/VLB bus legacy PATA + ports and allows them to be accessed via the new ATA layer. + + If unsure, say N. + +config PATA_TRIFLEX + tristate "Compaq Triflex PATA support" + depends on PCI + help + Enable support for the Compaq 'Triflex' IDE controller as found + on many Compaq Pentium-Pro systems, via the new ATA layer. + + If unsure, say N. + +config PATA_MPIIX + tristate "Intel PATA MPIIX support" + depends on PCI + help + This option enables support for MPIIX PATA support. + + If unsure, say N. + +config PATA_OLDPIIX + tristate "Intel PATA old PIIX support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for old(?) PIIX PATA support. + + If unsure, say N. + +config PATA_NETCELL + tristate "NETCELL Revolution RAID support" + depends on PCI + help + This option enables support for the Netcell Revolution RAID + PATA controller. + + If unsure, say N. + +config PATA_NS87410 + tristate "Nat Semi NS87410 PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the National Semiconductor + NS87410 PCI-IDE controller. + + If unsure, say N. + +config PATA_OPTI + tristate "OPTI621/6215 PATA support (Very Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables full PIO support for the early Opti ATA + controllers found on some old motherboards. + + If unsure, say N. + +config PATA_OPTIDMA + tristate "OPTI FireStar PATA support (Veyr Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables DMA/PIO support for the later OPTi + controllers found on some old motherboards and in some + latops + + If unsure, say N. + +config PATA_PCMCIA + tristate "PCMCIA PATA support" + depends on PCMCIA + help + This option enables support for PCMCIA ATA interfaces, including + compact flash card adapters via the new ATA layer. + + If unsure, say N. + +config PATA_PDC_OLD + tristate "Older Promise PATA controller support (Very Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the Promise 20246, 20262, 20263, + 20265 and 20267 adapters. + + If unsure, say N. + +config PATA_QDI + tristate "QDI VLB PATA support" + help + Support for QDI 6500 and 6580 PATA controllers on VESA local bus. + +config PATA_RADISYS + tristate "RADISYS 82600 PATA support (Very experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the RADISYS 82600 + PATA controllers via the new ATA layer + + If unsure, say N. + +config PATA_RZ1000 + tristate "PC Tech RZ1000 PATA support" + depends on PCI + help + This option enables basic support for the PC Tech RZ1000/1 + PATA controllers via the new ATA layer + + If unsure, say N. + +config PATA_SC1200 + tristate "SC1200 PATA support (Raving Lunatic)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the NatSemi/AMD SC1200 SoC + companion chip used with the Geode processor family. + + If unsure, say N. + +config PATA_SERVERWORKS + tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the Serverworks OSB4/CSB5/CSB6 and + HT1000 PATA controllers, via the new ATA layer. + + If unsure, say N. + +config PATA_PDC2027X + tristate "Promise PATA 2027x support" + depends on PCI + help + This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. + + If unsure, say N. + +config PATA_SIL680 + tristate "CMD / Silicon Image 680 PATA support" + depends on PCI + help + This option enables support for CMD / Silicon Image 680 PATA. + + If unsure, say N. + +config PATA_SIS + tristate "SiS PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for SiS PATA controllers + + If unsure, say N. + +config PATA_VIA + tristate "VIA PATA support" + depends on PCI + help + This option enables support for the VIA PATA interfaces + found on the many VIA chipsets. + + If unsure, say N. + +config PATA_WINBOND + tristate "Winbond SL82C105 PATA support" + depends on PCI + help + This option enables support for SL82C105 PATA devices found in the + Netwinder and some other systems + + If unsure, say N. + endif endmenu diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index e260e3fe65c..b183a04aeaf 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -17,5 +17,46 @@ obj-$(CONFIG_SATA_ULI) += sata_uli.o obj-$(CONFIG_SATA_MV) += sata_mv.o obj-$(CONFIG_PDC_ADMA) += pdc_adma.o +obj-$(CONFIG_PATA_ALI) += pata_ali.o +obj-$(CONFIG_PATA_AMD) += pata_amd.o +obj-$(CONFIG_PATA_ARTOP) += pata_artop.o +obj-$(CONFIG_PATA_ATIIXP) += pata_atiixp.o +obj-$(CONFIG_PATA_CMD64X) += pata_cmd64x.o +obj-$(CONFIG_PATA_CS5520) += pata_cs5520.o +obj-$(CONFIG_PATA_CS5530) += pata_cs5530.o +obj-$(CONFIG_PATA_CS5535) += pata_cs5535.o +obj-$(CONFIG_PATA_CYPRESS) += pata_cypress.o +obj-$(CONFIG_PATA_EFAR) += pata_efar.o +obj-$(CONFIG_PATA_HPT366) += pata_hpt366.o +obj-$(CONFIG_PATA_HPT37X) += pata_hpt37x.o +obj-$(CONFIG_PATA_HPT3X2N) += pata_hpt3x2n.o +obj-$(CONFIG_PATA_HPT3X3) += pata_hpt3x3.o +obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o +obj-$(CONFIG_PATA_IT8172) += pata_it8172.o +obj-$(CONFIG_PATA_IT821X) += pata_it821x.o +obj-$(CONFIG_PATA_NETCELL) += pata_netcell.o +obj-$(CONFIG_PATA_NS87410) += pata_ns87410.o +obj-$(CONFIG_PATA_OPTI) += pata_opti.o +obj-$(CONFIG_PATA_OPTIDMA) += pata_optidma.o +obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o +obj-$(CONFIG_PATA_OLDPIIX) += pata_oldpiix.o +obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia.o +obj-$(CONFIG_PATA_PDC2027X) += pata_pdc2027x.o +obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o +obj-$(CONFIG_PATA_QDI) += pata_qdi.o +obj-$(CONFIG_PATA_RADISYS) += pata_radisys.o +obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o +obj-$(CONFIG_PATA_SC1200) += pata_sc1200.o +obj-$(CONFIG_PATA_SERVERWORKS) += pata_serverworks.o +obj-$(CONFIG_PATA_SIL680) += pata_sil680.o +obj-$(CONFIG_PATA_VIA) += pata_via.o +obj-$(CONFIG_PATA_WINBOND) += pata_sl82c105.o +obj-$(CONFIG_PATA_SIS) += pata_sis.o +obj-$(CONFIG_PATA_TRIFLEX) += pata_triflex.o +# Should be last but one libata driver +obj-$(CONFIG_ATA_GENERIC) += ata_generic.o +# Should be last libata driver +obj-$(CONFIG_PATA_LEGACY) += pata_legacy.o + libata-objs := libata-core.o libata-scsi.o libata-sff.o libata-eh.o diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c new file mode 100644 index 00000000000..20b191dcf7e --- /dev/null +++ b/drivers/ata/ata_generic.c @@ -0,0 +1,252 @@ +/* + * ata_generic.c - Generic PATA/SATA controller driver. + * Copyright 2005 Red Hat Inc , all rights reserved. + * + * Elements from ide/pci/generic.c + * Copyright (C) 2001-2002 Andre Hedrick + * Portions (C) Copyright 2002 Red Hat Inc + * + * May be copied or modified under the terms of the GNU General Public License + * + * Driver for PCI IDE interfaces implementing the standard bus mastering + * interface functionality. This assumes the BIOS did the drive set up and + * tuning for us. By default we do not grab all IDE class devices as they + * may have other drivers or need fixups to avoid problems. Instead we keep + * a default list of stuff without documentation/driver that appears to + * work. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "ata_generic" +#define DRV_VERSION "0.2.6" + +/* + * A generic parallel ATA driver using libata + */ + +/** + * generic_pre_reset - probe begin + * @ap: ATA port + * + * Set up cable type and use generic probe init + */ + +static int generic_pre_reset(struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA80; + return ata_std_prereset(ap); +} + + +/** + * generic_error_handler - Probe specified port on PATA host controller + * @ap: Port to probe + * @classes: + * + * LOCKING: + * None (inherited from caller). + */ + + +static void generic_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, generic_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * generic_set_mode - mode setting + * @ap: interface to set up + * + * Use a non standard set_mode function. We don't want to be tuned. + * The BIOS configured everything. Our job is not to fiddle. We + * read the dma enabled bits from the PCI configuration of the device + * and respect them. + */ + +static void generic_set_mode(struct ata_port *ap) +{ + int dma_enabled = 0; + int i; + + /* Bits 5 and 6 indicate if DMA is active on master/slave */ + if (ap->ioaddr.bmdma_addr) + dma_enabled = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + if (ata_dev_enabled(dev)) { + /* We don't really care */ + dev->pio_mode = XFER_PIO_0; + dev->dma_mode = XFER_MW_DMA_0; + /* We do need the right mode information for DMA or PIO + and this comes from the current configuration flags */ + if (dma_enabled & (1 << (5 + i))) { + dev->xfer_mode = XFER_MW_DMA_0; + dev->xfer_shift = ATA_SHIFT_MWDMA; + dev->flags &= ~ATA_DFLAG_PIO; + } else { + dev->xfer_mode = XFER_PIO_0; + dev->xfer_shift = ATA_SHIFT_PIO; + dev->flags |= ATA_DFLAG_PIO; + } + } + } +} + +static struct scsi_host_template generic_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations generic_port_ops = { + .set_mode = generic_set_mode, + + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .data_xfer = ata_pio_data_xfer, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = generic_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int all_generic_ide; /* Set to claim all devices */ + +/** + * ata_generic_init - attach generic IDE + * @dev: PCI device found + * @id: match entry + * + * Called each time a matching IDE interface is found. We check if the + * interface is one we wish to claim and if so we perform any chip + * specific hacks then let the ATA layer do the heavy lifting. + */ + +static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + u16 command; + static struct ata_port_info info = { + .sht = &generic_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, + .port_ops = &generic_port_ops + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + + /* Don't use the generic entry unless instructed to do so */ + if (id->driver_data == 1 && all_generic_ide == 0) + return -ENODEV; + + /* Devices that need care */ + if (dev->vendor == PCI_VENDOR_ID_UMC && + dev->device == PCI_DEVICE_ID_UMC_UM8886A && + (!(PCI_FUNC(dev->devfn) & 1))) + return -ENODEV; + + if (dev->vendor == PCI_VENDOR_ID_OPTI && + dev->device == PCI_DEVICE_ID_OPTI_82C558 && + (!(PCI_FUNC(dev->devfn) & 1))) + return -ENODEV; + + /* Don't re-enable devices in generic mode or we will break some + motherboards with disabled and unused IDE controllers */ + pci_read_config_word(dev, PCI_COMMAND, &command); + if (!(command & PCI_COMMAND_IO)) + return -ENODEV; + + if (dev->vendor == PCI_VENDOR_ID_AL) + ata_pci_clear_simplex(dev); + + return ata_pci_init_one(dev, port_info, 2); +} + +static struct pci_device_id ata_generic[] = { + { PCI_DEVICE(PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_SAMURAI_IDE), }, + { PCI_DEVICE(PCI_VENDOR_ID_HOLTEK, PCI_DEVICE_ID_HOLTEK_6565), }, + { PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8673F), }, + { PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886A), }, + { PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF), }, + { PCI_DEVICE(PCI_VENDOR_ID_HINT, PCI_DEVICE_ID_HINT_VXPROII_IDE), }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C561), }, + { PCI_DEVICE(PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C558), }, + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO), }, + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), }, + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), }, + /* Must come last. If you add entries adjust this table appropriately */ + { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1}, + { 0, }, +}; + +static struct pci_driver ata_generic_pci_driver = { + .name = DRV_NAME, + .id_table = ata_generic, + .probe = ata_generic_init_one, + .remove = ata_pci_remove_one +}; + +static int __init ata_generic_init(void) +{ + return pci_module_init(&ata_generic_pci_driver); +} + + +static void __exit ata_generic_exit(void) +{ + pci_unregister_driver(&ata_generic_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for generic ATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, ata_generic); +MODULE_VERSION(DRV_VERSION); + +module_init(ata_generic_init); +module_exit(ata_generic_exit); + +module_param(all_generic_ide, int, 0); diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 22b2dba90b9..12b3a42fb35 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -93,7 +93,7 @@ #include #define DRV_NAME "ata_piix" -#define DRV_VERSION "2.00" +#define DRV_VERSION "2.00ac6" enum { PIIX_IOCFG = 0x54, /* IDE I/O configuration register */ @@ -116,15 +116,18 @@ enum { PIIX_80C_SEC = (1 << 7) | (1 << 6), /* controller IDs */ - piix4_pata = 0, - ich5_pata = 1, - ich5_sata = 2, - esb_sata = 3, - ich6_sata = 4, - ich6_sata_ahci = 5, - ich6m_sata_ahci = 6, - ich8_sata_ahci = 7, - + piix_pata_33 = 0, /* PIIX3 or 4 at 33Mhz */ + ich_pata_33 = 1, /* ICH up to UDMA 33 only */ + ich_pata_66 = 2, /* ICH up to 66 Mhz */ + ich_pata_100 = 3, /* ICH up to UDMA 100 */ + ich_pata_133 = 4, /* ICH up to UDMA 133 */ + ich5_sata = 5, + esb_sata = 6, + ich6_sata = 7, + ich6_sata_ahci = 8, + ich6m_sata_ahci = 9, + ich8_sata_ahci = 10, + /* constants for mapping table */ P0 = 0, /* port 0 */ P1 = 1, /* port 1 */ @@ -152,19 +155,54 @@ struct piix_host_priv { static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); static void piix_host_stop(struct ata_host *host); -static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev); -static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev); static void piix_pata_error_handler(struct ata_port *ap); +static void ich_pata_error_handler(struct ata_port *ap); static void piix_sata_error_handler(struct ata_port *ap); +static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev); +static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev); +static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev); static unsigned int in_module_init = 1; static const struct pci_device_id piix_pci_tbl[] = { #ifdef ATA_ENABLE_PATA - { 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix4_pata }, - { 0x8086, 0x24db, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, - { 0x8086, 0x25a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, - { 0x8086, 0x27df, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, + /* Intel PIIX4 for the 430TX/440BX/MX chipset: UDMA 33 */ + /* Also PIIX4E (fn3 rev 2) and PIIX4M (fn3 rev 3) */ + { 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 }, + { 0x8086, 0x24db, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + { 0x8086, 0x25a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* Intel PIIX4 */ + { 0x8086, 0x7199, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 }, + /* Intel PIIX4 */ + { 0x8086, 0x7601, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 }, + /* Intel PIIX */ + { 0x8086, 0x84CA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 }, + /* Intel ICH (i810, i815, i840) UDMA 66*/ + { 0x8086, 0x2411, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_66 }, + /* Intel ICH0 : UDMA 33*/ + { 0x8086, 0x2421, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_33 }, + /* Intel ICH2M */ + { 0x8086, 0x244A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* Intel ICH2 (i810E2, i845, 850, 860) UDMA 100 */ + { 0x8086, 0x244B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* Intel ICH3M */ + { 0x8086, 0x248A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* Intel ICH3 (E7500/1) UDMA 100 */ + { 0x8086, 0x248B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* Intel ICH4 (i845GV, i845E, i852, i855) UDMA 100 */ + { 0x8086, 0x24CA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + { 0x8086, 0x24CB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* Intel ICH5 */ + { 0x8086, 0x24DB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_133 }, + /* C-ICH (i810E2) */ + { 0x8086, 0x245B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* ESB (855GME/875P + 6300ESB) UDMA 100 */ + { 0x8086, 0x25A2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* ICH6 (and 6) (i915) UDMA 100 */ + { 0x8086, 0x266F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* ICH7/7-R (i945, i975) UDMA 100*/ + { 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_133 }, + { 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, #endif /* NOTE: The following PCI ids must be kept in sync with the @@ -263,6 +301,39 @@ static const struct ata_port_operations piix_pata_ops = { .host_stop = piix_host_stop, }; +static const struct ata_port_operations ich_pata_ops = { + .port_disable = ata_port_disable, + .set_piomode = piix_set_piomode, + .set_dmamode = ich_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ich_pata_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + static const struct ata_port_operations piix_sata_ops = { .port_disable = ata_port_disable, @@ -359,35 +430,56 @@ static const struct piix_map_db *piix_map_db_table[] = { }; static struct ata_port_info piix_port_info[] = { - /* piix4_pata */ + /* piix_pata_33: 0: PIIX3 or 4 at 33MHz */ { .sht = &piix_sht, - .flags = ATA_FLAG_SLAVE_POSS, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ -#if 0 - .mwdma_mask = 0x06, /* mwdma1-2 */ -#else - .mwdma_mask = 0x00, /* mwdma broken */ -#endif + .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ .udma_mask = ATA_UDMA_MASK_40C, .port_ops = &piix_pata_ops, }, - /* ich5_pata */ + /* ich_pata_33: 1 ICH0 - ICH at 33Mhz*/ + { + .sht = &piix_sht, + .flags = ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS, + .pio_mask = 0x1f, /* pio 0-4 */ + .mwdma_mask = 0x06, /* Check: maybe 0x07 */ + .udma_mask = ATA_UDMA2, /* UDMA33 */ + .port_ops = &ich_pata_ops, + }, + /* ich_pata_66: 2 ICH controllers up to 66MHz */ { .sht = &piix_sht, - .flags = ATA_FLAG_SLAVE_POSS | PIIX_FLAG_CHECKINTR, + .flags = ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS, + .pio_mask = 0x1f, /* pio 0-4 */ + .mwdma_mask = 0x06, /* MWDMA0 is broken on chip */ + .udma_mask = ATA_UDMA4, + .port_ops = &ich_pata_ops, + }, + + /* ich_pata_100: 3 */ + { + .sht = &piix_sht, + .flags = ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS | PIIX_FLAG_CHECKINTR, .pio_mask = 0x1f, /* pio0-4 */ -#if 0 .mwdma_mask = 0x06, /* mwdma1-2 */ -#else - .mwdma_mask = 0x00, /* mwdma broken */ -#endif - .udma_mask = 0x3f, /* udma0-5 */ - .port_ops = &piix_pata_ops, + .udma_mask = ATA_UDMA5, /* udma0-5 */ + .port_ops = &ich_pata_ops, }, - /* ich5_sata */ + /* ich_pata_133: 4 ICH with full UDMA6 */ + { + .sht = &piix_sht, + .flags = ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS | PIIX_FLAG_CHECKINTR, + .pio_mask = 0x1f, /* pio 0-4 */ + .mwdma_mask = 0x06, /* Check: maybe 0x07 */ + .udma_mask = ATA_UDMA6, /* UDMA133 */ + .port_ops = &ich_pata_ops, + }, + + /* ich5_sata: 5 */ { .sht = &piix_sht, .flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | @@ -398,7 +490,7 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_sata_ops, }, - /* i6300esb_sata */ + /* i6300esb_sata: 6 */ { .sht = &piix_sht, .flags = ATA_FLAG_SATA | @@ -409,7 +501,7 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_sata_ops, }, - /* ich6_sata */ + /* ich6_sata: 7 */ { .sht = &piix_sht, .flags = ATA_FLAG_SATA | @@ -420,7 +512,7 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_sata_ops, }, - /* ich6_sata_ahci */ + /* ich6_sata_ahci:8 */ { .sht = &piix_sht, .flags = ATA_FLAG_SATA | @@ -432,7 +524,7 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_sata_ops, }, - /* ich6m_sata_ahci */ + /* ich6m_sata_ahci: 9 */ { .sht = &piix_sht, .flags = ATA_FLAG_SATA | @@ -455,6 +547,7 @@ static struct ata_port_info piix_port_info[] = { .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &piix_sata_ops, }, + }; static struct pci_bits piix_enable_bits[] = { @@ -483,7 +576,8 @@ MODULE_PARM_DESC(force_pcs, "force honoring or ignoring PCS to work around " * LOCKING: * None (inherited from caller). */ -static void piix_pata_cbl_detect(struct ata_port *ap) + +static void ich_pata_cbl_detect(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); u8 tmp, mask; @@ -503,14 +597,12 @@ static void piix_pata_cbl_detect(struct ata_port *ap) cbl40: ap->cbl = ATA_CBL_PATA40; - ap->udma_mask &= ATA_UDMA_MASK_40C; } /** * piix_pata_prereset - prereset for PATA host controller * @ap: Target port * - * Prereset including cable detection. * * LOCKING: * None (inherited from caller). @@ -524,9 +616,7 @@ static int piix_pata_prereset(struct ata_port *ap) ap->eh_context.i.action &= ~ATA_EH_RESET_MASK; return 0; } - - piix_pata_cbl_detect(ap); - + ap->cbl = ATA_CBL_PATA40; return ata_std_prereset(ap); } @@ -536,6 +626,36 @@ static void piix_pata_error_handler(struct ata_port *ap) ata_std_postreset); } + +/** + * ich_pata_prereset - prereset for PATA host controller + * @ap: Target port + * + * + * LOCKING: + * None (inherited from caller). + */ +static int ich_pata_prereset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no])) { + ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n"); + ap->eh_context.i.action &= ~ATA_EH_RESET_MASK; + return 0; + } + + ich_pata_cbl_detect(ap); + + return ata_std_prereset(ap); +} + +static void ich_pata_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, ich_pata_prereset, ata_std_softreset, NULL, + ata_std_postreset); +} + /** * piix_sata_present_mask - determine present mask for SATA host controller * @ap: Target port @@ -637,6 +757,13 @@ static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev) unsigned int slave_port = 0x44; u16 master_data; u8 slave_data; + u8 udma_enable; + int control = 0; + + /* + * See Intel Document 298600-004 for the timing programing rules + * for ICH controllers. + */ static const /* ISP RTC */ u8 timings[][2] = { { 0, 0 }, @@ -645,20 +772,30 @@ static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev) { 2, 1 }, { 2, 3 }, }; + if (pio >= 2) + control |= 1; /* TIME1 enable */ + if (ata_pio_need_iordy(adev)) + control |= 2; /* IE enable */ + + /* Intel specifies that the PPE functionality is for disk only */ + if (adev->class == ATA_DEV_ATA) + control |= 4; /* PPE enable */ + pci_read_config_word(dev, master_port, &master_data); if (is_slave) { + /* Enable SITRE (seperate slave timing register) */ master_data |= 0x4000; - /* enable PPE, IE and TIME */ - master_data |= 0x0070; + /* enable PPE1, IE1 and TIME1 as needed */ + master_data |= (control << 4); pci_read_config_byte(dev, slave_port, &slave_data); slave_data &= (ap->port_no ? 0x0f : 0xf0); - slave_data |= - (timings[pio][0] << 2) | - (timings[pio][1] << (ap->port_no ? 4 : 0)); + /* Load the timing nibble for this slave */ + slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0); } else { + /* Master keeps the bits in a different format */ master_data &= 0xccf8; - /* enable PPE, IE and TIME */ - master_data |= 0x0007; + /* Enable PPE, IE and TIME as appropriate */ + master_data |= control; master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8); @@ -666,13 +803,23 @@ static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev) pci_write_config_word(dev, master_port, master_data); if (is_slave) pci_write_config_byte(dev, slave_port, slave_data); + + /* Ensure the UDMA bit is off - it will be turned back on if + UDMA is selected */ + + if (ap->udma_mask) { + pci_read_config_byte(dev, 0x48, &udma_enable); + udma_enable &= ~(1 << (2 * ap->port_no + adev->devno)); + pci_write_config_byte(dev, 0x48, udma_enable); + } } /** - * piix_set_dmamode - Initialize host controller PATA PIO timings + * do_pata_set_dmamode - Initialize host controller PATA PIO timings * @ap: Port whose timings we are configuring - * @adev: um + * @adev: Drive in question * @udma: udma mode, 0 - 6 + * @is_ich: set if the chip is an ICH device * * Set UDMA mode for device, in host controller PCI config space. * @@ -680,70 +827,140 @@ static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev) * None (inherited from caller). */ -static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev) +static void do_pata_set_dmamode (struct ata_port *ap, struct ata_device *adev, int isich) { - unsigned int udma = adev->dma_mode; /* FIXME: MWDMA too */ struct pci_dev *dev = to_pci_dev(ap->host->dev); - u8 maslave = ap->port_no ? 0x42 : 0x40; - u8 speed = udma; - unsigned int drive_dn = (ap->port_no ? 2 : 0) + adev->devno; - int a_speed = 3 << (drive_dn * 4); - int u_flag = 1 << drive_dn; - int v_flag = 0x01 << drive_dn; - int w_flag = 0x10 << drive_dn; - int u_speed = 0; - int sitre; - u16 reg4042, reg4a; - u8 reg48, reg54, reg55; - - pci_read_config_word(dev, maslave, ®4042); - DPRINTK("reg4042 = 0x%04x\n", reg4042); - sitre = (reg4042 & 0x4000) ? 1 : 0; - pci_read_config_byte(dev, 0x48, ®48); - pci_read_config_word(dev, 0x4a, ®4a); - pci_read_config_byte(dev, 0x54, ®54); - pci_read_config_byte(dev, 0x55, ®55); - - switch(speed) { - case XFER_UDMA_4: - case XFER_UDMA_2: u_speed = 2 << (drive_dn * 4); break; - case XFER_UDMA_6: - case XFER_UDMA_5: - case XFER_UDMA_3: - case XFER_UDMA_1: u_speed = 1 << (drive_dn * 4); break; - case XFER_UDMA_0: u_speed = 0 << (drive_dn * 4); break; - case XFER_MW_DMA_2: - case XFER_MW_DMA_1: break; - default: - BUG(); - return; - } + u8 master_port = ap->port_no ? 0x42 : 0x40; + u16 master_data; + u8 speed = adev->dma_mode; + int devid = adev->devno + 2 * ap->port_no; + u8 udma_enable; + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + pci_read_config_word(dev, master_port, &master_data); + pci_read_config_byte(dev, 0x48, &udma_enable); if (speed >= XFER_UDMA_0) { - if (!(reg48 & u_flag)) - pci_write_config_byte(dev, 0x48, reg48 | u_flag); - if (speed == XFER_UDMA_5) { - pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag); - } else { - pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); + unsigned int udma = adev->dma_mode - XFER_UDMA_0; + u16 udma_timing; + u16 ideconf; + int u_clock, u_speed; + + /* + * UDMA is handled by a combination of clock switching and + * selection of dividers + * + * Handy rule: Odd modes are UDMATIMx 01, even are 02 + * except UDMA0 which is 00 + */ + u_speed = min(2 - (udma & 1), udma); + if (udma == 5) + u_clock = 0x1000; /* 100Mhz */ + else if (udma > 2) + u_clock = 1; /* 66Mhz */ + else + u_clock = 0; /* 33Mhz */ + + udma_enable |= (1 << devid); + + /* Load the CT/RP selection */ + pci_read_config_word(dev, 0x4A, &udma_timing); + udma_timing &= ~(3 << (4 * devid)); + udma_timing |= u_speed << (4 * devid); + pci_write_config_word(dev, 0x4A, udma_timing); + + if (isich) { + /* Select a 33/66/100Mhz clock */ + pci_read_config_word(dev, 0x54, &ideconf); + ideconf &= ~(0x1001 << devid); + ideconf |= u_clock << devid; + /* For ICH or later we should set bit 10 for better + performance (WR_PingPong_En) */ + pci_write_config_word(dev, 0x54, ideconf); } - if ((reg4a & a_speed) != u_speed) - pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed); - if (speed > XFER_UDMA_2) { - if (!(reg54 & v_flag)) - pci_write_config_byte(dev, 0x54, reg54 | v_flag); - } else - pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); } else { - if (reg48 & u_flag) - pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); - if (reg4a & a_speed) - pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); - if (reg54 & v_flag) - pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); - if (reg55 & w_flag) - pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); + /* + * MWDMA is driven by the PIO timings. We must also enable + * IORDY unconditionally along with TIME1. PPE has already + * been set when the PIO timing was set. + */ + unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0; + unsigned int control; + u8 slave_data; + const unsigned int needed_pio[3] = { + XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 + }; + int pio = needed_pio[mwdma] - XFER_PIO_0; + + control = 3; /* IORDY|TIME1 */ + + /* If the drive MWDMA is faster than it can do PIO then + we must force PIO into PIO0 */ + + if (adev->pio_mode < needed_pio[mwdma]) + /* Enable DMA timing only */ + control |= 8; /* PIO cycles in PIO0 */ + + if (adev->devno) { /* Slave */ + master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */ + master_data |= control << 4; + pci_read_config_byte(dev, 0x44, &slave_data); + slave_data &= (0x0F + 0xE1 * ap->port_no); + /* Load the matching timing */ + slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0); + pci_write_config_byte(dev, 0x44, slave_data); + } else { /* Master */ + master_data &= 0xCCF4; /* Mask out IORDY|TIME1|DMAONLY + and master timing bits */ + master_data |= control; + master_data |= + (timings[pio][0] << 12) | + (timings[pio][1] << 8); + } + udma_enable &= ~(1 << devid); + pci_write_config_word(dev, master_port, master_data); } + /* Don't scribble on 0x48 if the controller does not support UDMA */ + if (ap->udma_mask) + pci_write_config_byte(dev, 0x48, udma_enable); +} + +/** + * piix_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: um + * + * Set MW/UDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + do_pata_set_dmamode(ap, adev, 0); +} + +/** + * ich_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: um + * + * Set MW/UDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + do_pata_set_dmamode(ap, adev, 1); } #define AHCI_PCI_BAR 5 @@ -872,7 +1089,7 @@ static void __devinit piix_init_sata_map(struct pci_dev *pdev, case IDE: WARN_ON((i & 1) || map[i + 1] != IDE); - pinfo[i / 2] = piix_port_info[ich5_pata]; + pinfo[i / 2] = piix_port_info[ich_pata_100]; pinfo[i / 2].private_data = hpriv; i++; printk(" IDE IDE"); @@ -1007,4 +1224,3 @@ static void __exit piix_exit(void) module_init(piix_init); module_exit(piix_exit); - diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c new file mode 100644 index 00000000000..0e0415ecfce --- /dev/null +++ b/drivers/ata/pata_ali.c @@ -0,0 +1,679 @@ +/* + * pata_ali.c - ALI 15x3 PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox + * + * based in part upon + * linux/drivers/ide/pci/alim15x3.c Version 0.17 2003/01/02 + * + * Copyright (C) 1998-2000 Michel Aubry, Maintainer + * Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer + * Copyright (C) 1999-2000 CJ, cjtsai@ali.com.tw, Maintainer + * + * Copyright (C) 1998-2000 Andre Hedrick (andre@linux-ide.org) + * May be copied or modified under the terms of the GNU General Public License + * Copyright (C) 2002 Alan Cox + * ALi (now ULi M5228) support by Clear Zhang + * + * Documentation + * Chipset documentation available under NDA only + * + * TODO/CHECK + * Cannot have ATAPI on both master & slave for rev < c2 (???) but + * otherwise should do atapi DMA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_ali" +#define DRV_VERSION "0.6.5" + +/* + * Cable special cases + */ + +static struct dmi_system_id cable_dmi_table[] = { + { + .ident = "HP Pavilion N5430", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_BOARD_NAME, "OmniBook N32N-736"), + }, + }, + { } +}; + +static int ali_cable_override(struct pci_dev *pdev) +{ + /* Fujitsu P2000 */ + if (pdev->subsystem_vendor == 0x10CF && pdev->subsystem_device == 0x10AF) + return 1; + /* Systems by DMI */ + if (dmi_check_system(cable_dmi_table)) + return 1; + return 0; +} + +/** + * ali_c2_cable_detect - cable detection + * @ap: ATA port + * + * Perform cable detection for C2 and later revisions + */ + +static int ali_c2_cable_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 ata66; + + /* Certain laptops use short but suitable cables and don't + implement the detect logic */ + + if (ali_cable_override(pdev)) + return ATA_CBL_PATA80; + + /* Host view cable detect 0x4A bit 0 primary bit 1 secondary + Bit set for 40 pin */ + pci_read_config_byte(pdev, 0x4A, &ata66); + if (ata66 & (1 << ap->port_no)) + return ATA_CBL_PATA40; + else + return ATA_CBL_PATA80; +} + +/** + * ali_early_error_handler - reset for eary chip + * @ap: ATA port + * + * Handle the reset callback for the later chips with cable detect + */ + +static int ali_c2_pre_reset(struct ata_port *ap) +{ + ap->cbl = ali_c2_cable_detect(ap); + return ata_std_prereset(ap); +} + +static void ali_c2_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, ali_c2_pre_reset, + ata_std_softreset, NULL, + ata_std_postreset); +} + +/** + * ali_early_cable_detect - cable detection + * @ap: ATA port + * + * Perform cable detection for older chipsets. This turns out to be + * rather easy to implement + */ + +static int ali_early_cable_detect(struct ata_port *ap) +{ + return ATA_CBL_PATA40; +} + +/** + * ali_early_probe_init - reset for early chip + * @ap: ATA port + * + * Handle the reset callback for the early (pre cable detect) chips. + */ + +static int ali_early_pre_reset(struct ata_port *ap) +{ + ap->cbl = ali_early_cable_detect(ap); + return ata_std_prereset(ap); +} + +static void ali_early_error_handler(struct ata_port *ap) +{ + return ata_bmdma_drive_eh(ap, ali_early_pre_reset, + ata_std_softreset, NULL, + ata_std_postreset); +} + +/** + * ali_20_filter - filter for earlier ALI DMA + * @ap: ALi ATA port + * @adev: attached device + * + * Ensure that we do not do DMA on CD devices. We may be able to + * fix that later on. Also ensure we do not do UDMA on WDC drives + */ + +static unsigned long ali_20_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask) +{ + char model_num[40]; + /* No DMA on anything but a disk for now */ + if (adev->class != ATA_DEV_ATA) + mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + ata_id_string(adev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num)); + if (strstr(model_num, "WDC")) + return mask &= ~ATA_MASK_UDMA; + return ata_pci_default_filter(ap, adev, mask); +} + +/** + * ali_fifo_control - FIFO manager + * @ap: ALi channel to control + * @adev: device for FIFO control + * @on: 0 for off 1 for on + * + * Enable or disable the FIFO on a given device. Because of the way the + * ALi FIFO works it provides a boost on ATA disk but can be confused by + * ATAPI and we must therefore manage it. + */ + +static void ali_fifo_control(struct ata_port *ap, struct ata_device *adev, int on) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int pio_fifo = 0x54 + ap->port_no; + u8 fifo; + int shift = 4 * adev->devno; + + /* ATA - FIFO on set nibble to 0x05, ATAPI - FIFO off, set nibble to + 0x00. Not all the docs agree but the behaviour we now use is the + one stated in the BIOS Programming Guide */ + + pci_read_config_byte(pdev, pio_fifo, &fifo); + fifo &= ~(0x0F << shift); + if (on) + fifo |= (on << shift); + pci_write_config_byte(pdev, pio_fifo, fifo); +} + +/** + * ali_program_modes - load mode registers + * @ap: ALi channel to load + * @adev: Device the timing is for + * @cmd: Command timing + * @data: Data timing + * @ultra: UDMA timing or zero for off + * + * Loads the timing registers for cmd/data and disable UDMA if + * ultra is zero. If ultra is set then load and enable the UDMA + * timing but do not touch the command/data timing. + */ + +static void ali_program_modes(struct ata_port *ap, struct ata_device *adev, struct ata_timing *t, u8 ultra) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int cas = 0x58 + 4 * ap->port_no; /* Command timing */ + int cbt = 0x59 + 4 * ap->port_no; /* Command timing */ + int drwt = 0x5A + 4 * ap->port_no + adev->devno; /* R/W timing */ + int udmat = 0x56 + ap->port_no; /* UDMA timing */ + int shift = 4 * adev->devno; + u8 udma; + + if (t != NULL) { + t->setup = FIT(t->setup, 1, 8) & 7; + t->act8b = FIT(t->act8b, 1, 8) & 7; + t->rec8b = FIT(t->rec8b, 1, 16) & 15; + t->active = FIT(t->active, 1, 8) & 7; + t->recover = FIT(t->recover, 1, 16) & 15; + + pci_write_config_byte(pdev, cas, t->setup); + pci_write_config_byte(pdev, cbt, (t->act8b << 4) | t->rec8b); + pci_write_config_byte(pdev, drwt, (t->active << 4) | t->recover); + } + + /* Set up the UDMA enable */ + pci_read_config_byte(pdev, udmat, &udma); + udma &= ~(0x0F << shift); + udma |= ultra << shift; + pci_write_config_byte(pdev, udmat, udma); +} + +/** + * ali_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the ALi registers for PIO mode. FIXME: add timings for + * PIO5. + */ + +static void ali_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_device *pair = ata_dev_pair(adev); + struct ata_timing t; + unsigned long T = 1000000000 / 33333; /* PCI clock based */ + + ata_timing_compute(adev, adev->pio_mode, &t, T, 1); + if (pair) { + struct ata_timing p; + ata_timing_compute(pair, pair->pio_mode, &p, T, 1); + ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT); + if (pair->dma_mode) { + ata_timing_compute(pair, pair->dma_mode, &p, T, 1); + ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT); + } + } + + /* PIO FIFO is only permitted on ATA disk */ + if (adev->class != ATA_DEV_ATA) + ali_fifo_control(ap, adev, 0x00); + ali_program_modes(ap, adev, &t, 0); + if (adev->class == ATA_DEV_ATA) + ali_fifo_control(ap, adev, 0x05); + +} + +/** + * ali_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * FIXME: MWDMA timings + */ + +static void ali_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static u8 udma_timing[7] = { 0xC, 0xB, 0xA, 0x9, 0x8, 0xF, 0xD }; + struct ata_device *pair = ata_dev_pair(adev); + struct ata_timing t; + unsigned long T = 1000000000 / 33333; /* PCI clock based */ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + + if (adev->class == ATA_DEV_ATA) + ali_fifo_control(ap, adev, 0x08); + + if (adev->dma_mode >= XFER_UDMA_0) { + ali_program_modes(ap, adev, NULL, udma_timing[adev->dma_mode - XFER_UDMA_0]); + if (adev->dma_mode >= XFER_UDMA_3) { + u8 reg4b; + pci_read_config_byte(pdev, 0x4B, ®4b); + reg4b |= 1; + pci_write_config_byte(pdev, 0x4B, reg4b); + } + } else { + ata_timing_compute(adev, adev->dma_mode, &t, T, 1); + if (pair) { + struct ata_timing p; + ata_timing_compute(pair, pair->pio_mode, &p, T, 1); + ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT); + if (pair->dma_mode) { + ata_timing_compute(pair, pair->dma_mode, &p, T, 1); + ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT); + } + } + ali_program_modes(ap, adev, &t, 0); + } +} + +/** + * ali_lock_sectors - Keep older devices to 255 sector mode + * @ap: ATA port + * @adev: Device + * + * Called during the bus probe for each device that is found. We use + * this call to lock the sector count of the device to 255 or less on + * older ALi controllers. If we didn't do this then large I/O's would + * require LBA48 commands which the older ALi requires are issued by + * slower PIO methods + */ + +static void ali_lock_sectors(struct ata_port *ap, struct ata_device *adev) +{ + adev->max_sectors = 255; +} + +static struct scsi_host_template ali_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + /* Keep LBA28 counts so large I/O's don't turn LBA48 and PIO + with older controllers. Not locked so will grow on C5 or later */ + .max_sectors = 255, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +/* + * Port operations for PIO only ALi + */ + +static struct ata_port_operations ali_early_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = ali_set_piomode, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ali_early_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Port operations for DMA capable ALi without cable + * detect + */ +static struct ata_port_operations ali_20_port_ops = { + .port_disable = ata_port_disable, + + .set_piomode = ali_set_piomode, + .set_dmamode = ali_set_dmamode, + .mode_filter = ali_20_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + .dev_config = ali_lock_sectors, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ali_early_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Port operations for DMA capable ALi with cable detect + */ +static struct ata_port_operations ali_c2_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = ali_set_piomode, + .set_dmamode = ali_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + .dev_config = ali_lock_sectors, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ali_c2_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Port operations for DMA capable ALi with cable detect and LBA48 + */ +static struct ata_port_operations ali_c5_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = ali_set_piomode, + .set_dmamode = ali_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ali_c2_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * ali_init_one - discovery callback + * @pdev: PCI device ID + * @id: PCI table info + * + * An ALi IDE interface has been discovered. Figure out what revision + * and perform configuration work before handing it to the ATA layer + */ + +static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + static struct ata_port_info info_early = { + .sht = &ali_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .port_ops = &ali_early_port_ops + }; + /* Revision 0x20 added DMA */ + static struct ata_port_info info_20 = { + .sht = &ali_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &ali_20_port_ops + }; + /* Revision 0x20 with support logic added UDMA */ + static struct ata_port_info info_20_udma = { + .sht = &ali_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x07, /* UDMA33 */ + .port_ops = &ali_20_port_ops + }; + /* Revision 0xC2 adds UDMA66 */ + static struct ata_port_info info_c2 = { + .sht = &ali_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x1f, + .port_ops = &ali_c2_port_ops + }; + /* Revision 0xC3 is UDMA100 */ + static struct ata_port_info info_c3 = { + .sht = &ali_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, + .port_ops = &ali_c2_port_ops + }; + /* Revision 0xC4 is UDMA133 */ + static struct ata_port_info info_c4 = { + .sht = &ali_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, + .port_ops = &ali_c2_port_ops + }; + /* Revision 0xC5 is UDMA133 with LBA48 DMA */ + static struct ata_port_info info_c5 = { + .sht = &ali_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, + .port_ops = &ali_c5_port_ops + }; + + static struct ata_port_info *port_info[2]; + u8 rev, tmp; + struct pci_dev *north, *isa_bridge; + + pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); + + /* + * The chipset revision selects the driver operations and + * mode data. + */ + + if (rev < 0x20) { + port_info[0] = port_info[1] = &info_early; + } else if (rev < 0xC2) { + /* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */ + pci_read_config_byte(pdev, 0x4B, &tmp); + /* Clear CD-ROM DMA write bit */ + tmp &= 0x7F; + pci_write_config_byte(pdev, 0x4B, tmp); + port_info[0] = port_info[1] = &info_20; + } else if (rev == 0xC2) { + port_info[0] = port_info[1] = &info_c2; + } else if (rev == 0xC3) { + port_info[0] = port_info[1] = &info_c3; + } else if (rev == 0xC4) { + port_info[0] = port_info[1] = &info_c4; + } else + port_info[0] = port_info[1] = &info_c5; + + if (rev >= 0xC2) { + /* Enable cable detection logic */ + pci_read_config_byte(pdev, 0x4B, &tmp); + pci_write_config_byte(pdev, 0x4B, tmp | 0x08); + } + + north = pci_get_slot(pdev->bus, PCI_DEVFN(0,0)); + isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); + + if (north && north->vendor == PCI_VENDOR_ID_AL) { + /* Configure the ALi bridge logic. For non ALi rely on BIOS. + Set the south bridge enable bit */ + pci_read_config_byte(isa_bridge, 0x79, &tmp); + if (rev == 0xC2) + pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04); + else if (rev > 0xC2) + pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02); + } + + if (rev >= 0x20) { + if (rev < 0xC2) { + /* Are we paired with a UDMA capable chip */ + pci_read_config_byte(isa_bridge, 0x5E, &tmp); + if ((tmp & 0x1E) == 0x12) + port_info[0] = port_info[1] = &info_20_udma; + } + /* + * CD_ROM DMA on (0x53 bit 0). Enable this even if we want + * to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control + * via 0x54/55. + */ + pci_read_config_byte(pdev, 0x53, &tmp); + if (rev <= 0x20) + tmp &= ~0x02; + if (rev == 0xc7) + tmp |= 0x03; + else + tmp |= 0x01; /* CD_ROM enable for DMA */ + pci_write_config_byte(pdev, 0x53, tmp); + } + + pci_dev_put(isa_bridge); + pci_dev_put(north); + + ata_pci_clear_simplex(pdev); + return ata_pci_init_one(pdev, port_info, 2); +} + +static struct pci_device_id ali[] = { + { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5228), }, + { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229), }, + { 0, }, +}; + +static struct pci_driver ali_pci_driver = { + .name = DRV_NAME, + .id_table = ali, + .probe = ali_init_one, + .remove = ata_pci_remove_one +}; + +static int __init ali_init(void) +{ + return pci_register_driver(&ali_pci_driver); +} + + +static void __exit ali_exit(void) +{ + pci_unregister_driver(&ali_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for ALi PATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, ali); +MODULE_VERSION(DRV_VERSION); + +module_init(ali_init); +module_exit(ali_exit); diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c new file mode 100644 index 00000000000..6ab568428a1 --- /dev/null +++ b/drivers/ata/pata_amd.c @@ -0,0 +1,707 @@ +/* + * pata_amd.c - AMD PATA for new ATA layer + * (C) 2005-2006 Red Hat Inc + * Alan Cox + * + * Based on pata-sil680. Errata information is taken from data sheets + * and the amd74xx.c driver by Vojtech Pavlik. Nvidia SATA devices are + * claimed by sata-nv.c. + * + * TODO: + * Variable system clock when/if it makes sense + * Power management on ports + * + * + * Documentation publically available. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_amd" +#define DRV_VERSION "0.2.2" + +/** + * timing_setup - shared timing computation and load + * @ap: ATA port being set up + * @adev: drive being configured + * @offset: port offset + * @speed: target speed + * @clock: clock multiplier (number of times 33MHz for this part) + * + * Perform the actual timing set up for Nvidia or AMD PATA devices. + * The actual devices vary so they all call into this helper function + * providing the clock multipler and offset (because AMD and Nvidia put + * the ports at different locations). + */ + +static void timing_setup(struct ata_port *ap, struct ata_device *adev, int offset, int speed, int clock) +{ + static const unsigned char amd_cyc2udma[] = { + 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7 + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct ata_device *peer = ata_dev_pair(adev); + int dn = ap->port_no * 2 + adev->devno; + struct ata_timing at, apeer; + int T, UT; + const int amd_clock = 33333; /* KHz. */ + u8 t; + + T = 1000000000 / amd_clock; + UT = T / min_t(int, max_t(int, clock, 1), 2); + + if (ata_timing_compute(adev, speed, &at, T, UT) < 0) { + dev_printk(KERN_ERR, &pdev->dev, "unknown mode %d.\n", speed); + return; + } + + if (peer) { + /* This may be over conservative */ + if (peer->dma_mode) { + ata_timing_compute(peer, peer->dma_mode, &apeer, T, UT); + ata_timing_merge(&apeer, &at, &at, ATA_TIMING_8BIT); + } + ata_timing_compute(peer, peer->pio_mode, &apeer, T, UT); + ata_timing_merge(&apeer, &at, &at, ATA_TIMING_8BIT); + } + + if (speed == XFER_UDMA_5 && amd_clock <= 33333) at.udma = 1; + if (speed == XFER_UDMA_6 && amd_clock <= 33333) at.udma = 15; + + /* + * Now do the setup work + */ + + /* Configure the address set up timing */ + pci_read_config_byte(pdev, offset + 0x0C, &t); + t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(at.setup, 1, 4) - 1) << ((3 - dn) << 1)); + pci_write_config_byte(pdev, offset + 0x0C , t); + + /* Configure the 8bit I/O timing */ + pci_write_config_byte(pdev, offset + 0x0E + (1 - (dn >> 1)), + ((FIT(at.act8b, 1, 16) - 1) << 4) | (FIT(at.rec8b, 1, 16) - 1)); + + /* Drive timing */ + pci_write_config_byte(pdev, offset + 0x08 + (3 - dn), + ((FIT(at.active, 1, 16) - 1) << 4) | (FIT(at.recover, 1, 16) - 1)); + + switch (clock) { + case 1: + t = at.udma ? (0xc0 | (FIT(at.udma, 2, 5) - 2)) : 0x03; + break; + + case 2: + t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 2, 10)]) : 0x03; + break; + + case 3: + t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 10)]) : 0x03; + break; + + case 4: + t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 15)]) : 0x03; + break; + + default: + return; + } + + /* UDMA timing */ + pci_write_config_byte(pdev, offset + 0x10 + (3 - dn), t); +} + +/** + * amd_probe_init - cable detection + * @ap: ATA port + * + * Perform cable detection. The BIOS stores this in PCI config + * space for us. + */ + +static int amd_pre_reset(struct ata_port *ap) +{ + static const u32 bitmask[2] = {0x03, 0xC0}; + static const struct pci_bits amd_enable_bits[] = { + { 0x40, 1, 0x02, 0x02 }, + { 0x40, 1, 0x01, 0x01 } + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 ata66; + + if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + + pci_read_config_byte(pdev, 0x42, &ata66); + if (ata66 & bitmask[ap->port_no]) + ap->cbl = ATA_CBL_PATA80; + else + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); + +} + +static void amd_error_handler(struct ata_port *ap) +{ + return ata_bmdma_drive_eh(ap, amd_pre_reset, + ata_std_softreset, NULL, + ata_std_postreset); +} + +static int amd_early_pre_reset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static struct pci_bits amd_enable_bits[] = { + { 0x40, 1, 0x02, 0x02 }, + { 0x40, 1, 0x01, 0x01 } + }; + + if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + /* No host side cable detection */ + ap->cbl = ATA_CBL_PATA80; + return ata_std_prereset(ap); + +} + +static void amd_early_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, amd_early_pre_reset, + ata_std_softreset, NULL, + ata_std_postreset); +} + +/** + * amd33_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the AMD registers for PIO mode. + */ + +static void amd33_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x40, adev->pio_mode, 1); +} + +static void amd66_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x40, adev->pio_mode, 2); +} + +static void amd100_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x40, adev->pio_mode, 3); +} + +static void amd133_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x40, adev->pio_mode, 4); +} + +/** + * amd33_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the MWDMA/UDMA modes for the AMD and Nvidia + * chipset. + */ + +static void amd33_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x40, adev->dma_mode, 1); +} + +static void amd66_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x40, adev->dma_mode, 2); +} + +static void amd100_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x40, adev->dma_mode, 3); +} + +static void amd133_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x40, adev->dma_mode, 4); +} + + +/** + * nv_probe_init - cable detection + * @ap: ATA port + * + * Perform cable detection. The BIOS stores this in PCI config + * space for us. + */ + +static int nv_pre_reset(struct ata_port *ap) { + static const u8 bitmask[2] = {0x03, 0xC0}; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 ata66; + u16 udma; + + pci_read_config_byte(pdev, 0x52, &ata66); + if (ata66 & bitmask[ap->port_no]) + ap->cbl = ATA_CBL_PATA80; + else + ap->cbl = ATA_CBL_PATA40; + + /* We now have to double check because the Nvidia boxes BIOS + doesn't always set the cable bits but does set mode bits */ + + pci_read_config_word(pdev, 0x62 - 2 * ap->port_no, &udma); + if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400) + ap->cbl = ATA_CBL_PATA80; + return ata_std_prereset(ap); +} + +static void nv_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, nv_pre_reset, + ata_std_softreset, NULL, + ata_std_postreset); +} +/** + * nv100_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the AMD registers for PIO mode. + */ + +static void nv100_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x50, adev->pio_mode, 3); +} + +static void nv133_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x50, adev->pio_mode, 4); +} + +/** + * nv100_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the MWDMA/UDMA modes for the AMD and Nvidia + * chipset. + */ + +static void nv100_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x50, adev->dma_mode, 3); +} + +static void nv133_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x50, adev->dma_mode, 4); +} + +static struct scsi_host_template amd_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations amd33_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = amd33_set_piomode, + .set_dmamode = amd33_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = amd_early_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations amd66_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = amd66_set_piomode, + .set_dmamode = amd66_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = amd_early_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations amd100_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = amd100_set_piomode, + .set_dmamode = amd100_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = amd_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations amd133_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = amd133_set_piomode, + .set_dmamode = amd133_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = amd_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations nv100_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = nv100_set_piomode, + .set_dmamode = nv100_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = nv_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations nv133_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = nv133_set_piomode, + .set_dmamode = nv133_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = nv_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + static struct ata_port_info info[10] = { + { /* 0: AMD 7401 */ + .sht = &amd_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, /* No SWDMA */ + .udma_mask = 0x07, /* UDMA 33 */ + .port_ops = &amd33_port_ops + }, + { /* 1: Early AMD7409 - no swdma */ + .sht = &amd_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x1f, /* UDMA 66 */ + .port_ops = &amd66_port_ops + }, + { /* 2: AMD 7409, no swdma errata */ + .sht = &amd_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x1f, /* UDMA 66 */ + .port_ops = &amd66_port_ops + }, + { /* 3: AMD 7411 */ + .sht = &amd_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, /* UDMA 100 */ + .port_ops = &amd100_port_ops + }, + { /* 4: AMD 7441 */ + .sht = &amd_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, /* UDMA 100 */ + .port_ops = &amd100_port_ops + }, + { /* 5: AMD 8111*/ + .sht = &amd_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, /* UDMA 133, no swdma */ + .port_ops = &amd133_port_ops + }, + { /* 6: AMD 8111 UDMA 100 (Serenade) */ + .sht = &amd_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, /* UDMA 100, no swdma */ + .port_ops = &amd133_port_ops + }, + { /* 7: Nvidia Nforce */ + .sht = &amd_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, /* UDMA 100 */ + .port_ops = &nv100_port_ops + }, + { /* 8: Nvidia Nforce2 and later */ + .sht = &amd_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, /* UDMA 133, no swdma */ + .port_ops = &nv133_port_ops + }, + { /* 9: AMD CS5536 (Geode companion) */ + .sht = &amd_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, /* UDMA 100 */ + .port_ops = &amd100_port_ops + } + }; + static struct ata_port_info *port_info[2]; + static int printed_version; + int type = id->driver_data; + u8 rev; + u8 fifo; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + + pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); + pci_read_config_byte(pdev, 0x41, &fifo); + + /* Check for AMD7409 without swdma errata and if found adjust type */ + if (type == 1 && rev > 0x7) + type = 2; + + /* Check for AMD7411 */ + if (type == 3) + /* FIFO is broken */ + pci_write_config_byte(pdev, 0x41, fifo & 0x0F); + else + pci_write_config_byte(pdev, 0x41, fifo | 0xF0); + + /* Serenade ? */ + if (type == 5 && pdev->subsystem_vendor == PCI_VENDOR_ID_AMD && + pdev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE) + type = 6; /* UDMA 100 only */ + + if (type < 3) + ata_pci_clear_simplex(pdev); + + /* And fire it up */ + + port_info[0] = port_info[1] = &info[type]; + return ata_pci_init_one(pdev, port_info, 2); +} + +static const struct pci_device_id amd[] = { + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_COBRA_7401, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7409, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7411, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 }, + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_OPUS_7441, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 7 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 9 }, + { 0, }, +}; + +static struct pci_driver amd_pci_driver = { + .name = DRV_NAME, + .id_table = amd, + .probe = amd_init_one, + .remove = ata_pci_remove_one +}; + +static int __init amd_init(void) +{ + return pci_register_driver(&amd_pci_driver); +} + +static void __exit amd_exit(void) +{ + pci_unregister_driver(&amd_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for AMD PATA IDE"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, amd); +MODULE_VERSION(DRV_VERSION); + +module_init(amd_init); +module_exit(amd_exit); diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c new file mode 100644 index 00000000000..d6ef3bf1bac --- /dev/null +++ b/drivers/ata/pata_artop.c @@ -0,0 +1,518 @@ +/* + * pata_artop.c - ARTOP ATA controller driver + * + * (C) 2006 Red Hat + * + * Based in part on drivers/ide/pci/aec62xx.c + * Copyright (C) 1999-2002 Andre Hedrick + * 865/865R fixes for Macintosh card version from a patch to the old + * driver by Thibaut VARENE + * When setting the PCI latency we must set 0x80 or higher for burst + * performance Alessandro Zummo + * + * TODO + * 850 serialization once the core supports it + * Investigate no_dsc on 850R + * Clock detect + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_artop" +#define DRV_VERSION "0.4.1" + +/* + * The ARTOP has 33 Mhz and "over clocked" timing tables. Until we + * get PCI bus speed functionality we leave this as 0. Its a variable + * for when we get the functionality and also for folks wanting to + * test stuff. + */ + +static int clock = 0; + +static int artop6210_pre_reset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + const struct pci_bits artop_enable_bits[] = { + { 0x4AU, 1U, 0x02UL, 0x02UL }, /* port 0 */ + { 0x4AU, 1U, 0x04UL, 0x04UL }, /* port 1 */ + }; + + if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +/** + * artop6210_error_handler - Probe specified port on PATA host controller + * @ap: Port to probe + * + * LOCKING: + * None (inherited from caller). + */ + +static void artop6210_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, artop6210_pre_reset, + ata_std_softreset, NULL, + ata_std_postreset); +} + +/** + * artop6260_pre_reset - check for 40/80 pin + * @ap: Port + * + * The ARTOP hardware reports the cable detect bits in register 0x49. + * Nothing complicated needed here. + */ + +static int artop6260_pre_reset(struct ata_port *ap) +{ + static const struct pci_bits artop_enable_bits[] = { + { 0x4AU, 1U, 0x02UL, 0x02UL }, /* port 0 */ + { 0x4AU, 1U, 0x04UL, 0x04UL }, /* port 1 */ + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 tmp; + + /* Odd numbered device ids are the units with enable bits (the -R cards) */ + if (pdev->device % 1 && !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + pci_read_config_byte(pdev, 0x49, &tmp); + if (tmp & (1 >> ap->port_no)) + ap->cbl = ATA_CBL_PATA40; + else + ap->cbl = ATA_CBL_PATA80; + return ata_std_prereset(ap); +} + +/** + * artop6260_error_handler - Probe specified port on PATA host controller + * @ap: Port to probe + * + * LOCKING: + * None (inherited from caller). + */ + +static void artop6260_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, artop6260_pre_reset, + ata_std_softreset, NULL, + ata_std_postreset); +} + +/** + * artop6210_load_piomode - Load a set of PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device + * @pio: PIO mode + * + * Set PIO mode for device, in host controller PCI config space. This + * is used both to set PIO timings in PIO mode and also to set the + * matching PIO clocking for UDMA, as well as the MWDMA timings. + * + * LOCKING: + * None (inherited from caller). + */ + +static void artop6210_load_piomode(struct ata_port *ap, struct ata_device *adev, unsigned int pio) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = adev->devno + 2 * ap->port_no; + const u16 timing[2][5] = { + { 0x0000, 0x000A, 0x0008, 0x0303, 0x0301 }, + { 0x0700, 0x070A, 0x0708, 0x0403, 0x0401 } + + }; + /* Load the PIO timing active/recovery bits */ + pci_write_config_word(pdev, 0x40 + 2 * dn, timing[clock][pio]); +} + +/** + * artop6210_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device we are configuring + * + * Set PIO mode for device, in host controller PCI config space. For + * ARTOP we must also clear the UDMA bits if we are not doing UDMA. In + * the event UDMA is used the later call to set_dmamode will set the + * bits as required. + * + * LOCKING: + * None (inherited from caller). + */ + +static void artop6210_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = adev->devno + 2 * ap->port_no; + u8 ultra; + + artop6210_load_piomode(ap, adev, adev->pio_mode - XFER_PIO_0); + + /* Clear the UDMA mode bits (set_dmamode will redo this if needed) */ + pci_read_config_byte(pdev, 0x54, &ultra); + ultra &= ~(3 << (2 * dn)); + pci_write_config_byte(pdev, 0x54, ultra); +} + +/** + * artop6260_load_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device we are configuring + * @pio: PIO mode + * + * Set PIO mode for device, in host controller PCI config space. The + * ARTOP6260 and relatives store the timing data differently. + * + * LOCKING: + * None (inherited from caller). + */ + +static void artop6260_load_piomode (struct ata_port *ap, struct ata_device *adev, unsigned int pio) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = adev->devno + 2 * ap->port_no; + const u8 timing[2][5] = { + { 0x00, 0x0A, 0x08, 0x33, 0x31 }, + { 0x70, 0x7A, 0x78, 0x43, 0x41 } + + }; + /* Load the PIO timing active/recovery bits */ + pci_write_config_byte(pdev, 0x40 + dn, timing[clock][pio]); +} + +/** + * artop6260_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device we are configuring + * + * Set PIO mode for device, in host controller PCI config space. For + * ARTOP we must also clear the UDMA bits if we are not doing UDMA. In + * the event UDMA is used the later call to set_dmamode will set the + * bits as required. + * + * LOCKING: + * None (inherited from caller). + */ + +static void artop6260_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 ultra; + + artop6260_load_piomode(ap, adev, adev->pio_mode - XFER_PIO_0); + + /* Clear the UDMA mode bits (set_dmamode will redo this if needed) */ + pci_read_config_byte(pdev, 0x44 + ap->port_no, &ultra); + ultra &= ~(7 << (4 * adev->devno)); /* One nibble per drive */ + pci_write_config_byte(pdev, 0x44 + ap->port_no, ultra); +} + +/** + * artop6210_set_dmamode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: um + * + * Set DMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void artop6210_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = adev->devno + 2 * ap->port_no; + u8 ultra; + + if (adev->dma_mode == XFER_MW_DMA_0) + pio = 1; + else + pio = 4; + + /* Load the PIO timing active/recovery bits */ + artop6210_load_piomode(ap, adev, pio); + + pci_read_config_byte(pdev, 0x54, &ultra); + ultra &= ~(3 << (2 * dn)); + + /* Add ultra DMA bits if in UDMA mode */ + if (adev->dma_mode >= XFER_UDMA_0) { + u8 mode = (adev->dma_mode - XFER_UDMA_0) + 1 - clock; + if (mode == 0) + mode = 1; + ultra |= (mode << (2 * dn)); + } + pci_write_config_byte(pdev, 0x54, ultra); +} + +/** + * artop6260_set_dmamode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device we are configuring + * + * Set DMA mode for device, in host controller PCI config space. The + * ARTOP6260 and relatives store the timing data differently. + * + * LOCKING: + * None (inherited from caller). + */ + +static void artop6260_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 ultra; + + if (adev->dma_mode == XFER_MW_DMA_0) + pio = 1; + else + pio = 4; + + /* Load the PIO timing active/recovery bits */ + artop6260_load_piomode(ap, adev, pio); + + /* Add ultra DMA bits if in UDMA mode */ + pci_read_config_byte(pdev, 0x44 + ap->port_no, &ultra); + ultra &= ~(7 << (4 * adev->devno)); /* One nibble per drive */ + if (adev->dma_mode >= XFER_UDMA_0) { + u8 mode = adev->dma_mode - XFER_UDMA_0 + 1 - clock; + if (mode == 0) + mode = 1; + ultra |= (mode << (4 * adev->devno)); + } + pci_write_config_byte(pdev, 0x44 + ap->port_no, ultra); +} + +static struct scsi_host_template artop_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations artop6210_ops = { + .port_disable = ata_port_disable, + .set_piomode = artop6210_set_piomode, + .set_dmamode = artop6210_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = artop6210_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + +static const struct ata_port_operations artop6260_ops = { + .port_disable = ata_port_disable, + .set_piomode = artop6260_set_piomode, + .set_dmamode = artop6260_set_dmamode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = artop6260_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .eng_timeout = ata_eng_timeout, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + + +/** + * artop_init_one - Register ARTOP ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in artop_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id) +{ + static int printed_version; + static struct ata_port_info info_6210 = { + .sht = &artop_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = ATA_UDMA2, + .port_ops = &artop6210_ops, + }; + static struct ata_port_info info_626x = { + .sht = &artop_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = ATA_UDMA4, + .port_ops = &artop6260_ops, + }; + static struct ata_port_info info_626x_fast = { + .sht = &artop_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = ATA_UDMA5, + .port_ops = &artop6260_ops, + }; + struct ata_port_info *port_info[2]; + struct ata_port_info *info; + int ports = 2; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, + "version " DRV_VERSION "\n"); + + if (id->driver_data == 0) { /* 6210 variant */ + info = &info_6210; + /* BIOS may have left us in UDMA, clear it before libata probe */ + pci_write_config_byte(pdev, 0x54, 0); + /* For the moment (also lacks dsc) */ + printk(KERN_WARNING "ARTOP 6210 requires serialize functionality not yet supported by libata.\n"); + printk(KERN_WARNING "Secondary ATA ports will not be activated.\n"); + ports = 1; + } + else if (id->driver_data == 1) /* 6260 */ + info = &info_626x; + else if (id->driver_data == 2) { /* 6260 or 6260 + fast */ + unsigned long io = pci_resource_start(pdev, 4); + u8 reg; + + info = &info_626x; + if (inb(io) & 0x10) + info = &info_626x_fast; + /* Mac systems come up with some registers not set as we + will need them */ + + /* Clear reset & test bits */ + pci_read_config_byte(pdev, 0x49, ®); + pci_write_config_byte(pdev, 0x49, reg & ~ 0x30); + + /* PCI latency must be > 0x80 for burst mode, tweak it + * if required. + */ + pci_read_config_byte(pdev, PCI_LATENCY_TIMER, ®); + if (reg <= 0x80) + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x90); + + /* Enable IRQ output and burst mode */ + pci_read_config_byte(pdev, 0x4a, ®); + pci_write_config_byte(pdev, 0x4a, (reg & ~0x01) | 0x80); + + } + port_info[0] = port_info[1] = info; + return ata_pci_init_one(pdev, port_info, ports); +} + +static const struct pci_device_id artop_pci_tbl[] = { + { 0x1191, 0x0005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { 0x1191, 0x0006, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { 0x1191, 0x0007, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { 0x1191, 0x0008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, + { 0x1191, 0x0009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, + { } /* terminate list */ +}; + +static struct pci_driver artop_pci_driver = { + .name = DRV_NAME, + .id_table = artop_pci_tbl, + .probe = artop_init_one, + .remove = ata_pci_remove_one, +}; + +static int __init artop_init(void) +{ + return pci_register_driver(&artop_pci_driver); +} + +static void __exit artop_exit(void) +{ + pci_unregister_driver(&artop_pci_driver); +} + + +module_init(artop_init); +module_exit(artop_exit); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for ARTOP PATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, artop_pci_tbl); +MODULE_VERSION(DRV_VERSION); + diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c new file mode 100644 index 00000000000..3f78a1e54a7 --- /dev/null +++ b/drivers/ata/pata_atiixp.c @@ -0,0 +1,306 @@ +/* + * pata_atiixp.c - ATI PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox + * + * Based on + * + * linux/drivers/ide/pci/atiixp.c Version 0.01-bart2 Feb. 26, 2004 + * + * Copyright (C) 2003 ATI Inc. + * Copyright (C) 2004 Bartlomiej Zolnierkiewicz + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_atiixp" +#define DRV_VERSION "0.4.2" + +enum { + ATIIXP_IDE_PIO_TIMING = 0x40, + ATIIXP_IDE_MWDMA_TIMING = 0x44, + ATIIXP_IDE_PIO_CONTROL = 0x48, + ATIIXP_IDE_PIO_MODE = 0x4a, + ATIIXP_IDE_UDMA_CONTROL = 0x54, + ATIIXP_IDE_UDMA_MODE = 0x56 +}; + +static int atiixp_pre_reset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static struct pci_bits atiixp_enable_bits[] = { + { 0x48, 1, 0x01, 0x00 }, + { 0x48, 1, 0x08, 0x00 } + }; + + if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + ap->cbl = ATA_CBL_PATA80; + return ata_std_prereset(ap); +} + +static void atiixp_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, atiixp_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * atiixp_set_pio_timing - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called by both the pio and dma setup functions to set the controller + * timings for PIO transfers. We must load both the mode number and + * timing values into the controller. + */ + +static void atiixp_set_pio_timing(struct ata_port *ap, struct ata_device *adev, int pio) +{ + static u8 pio_timings[5] = { 0x5D, 0x47, 0x34, 0x22, 0x20 }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = 2 * ap->port_no + adev->devno; + + /* Check this is correct - the order is odd in both drivers */ + int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1); + u16 pio_mode_data, pio_timing_data; + + pci_read_config_word(pdev, ATIIXP_IDE_PIO_MODE, &pio_mode_data); + pio_mode_data &= ~(0x7 << (4 * dn)); + pio_mode_data |= pio << (4 * dn); + pci_write_config_word(pdev, ATIIXP_IDE_PIO_MODE, pio_mode_data); + + pci_read_config_word(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data); + pio_mode_data &= ~(0xFF << timing_shift); + pio_mode_data |= (pio_timings[pio] << timing_shift); + pci_write_config_word(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data); +} + +/** + * atiixp_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. We use a shared helper for this + * as the DMA setup must also adjust the PIO timing information. + */ + +static void atiixp_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + atiixp_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0); +} + +/** + * atiixp_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the DMA mode setup. We use timing tables for most + * modes but must tune an appropriate PIO mode to match. + */ + +static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static u8 mwdma_timings[5] = { 0x77, 0x21, 0x20 }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dma = adev->dma_mode; + int dn = 2 * ap->port_no + adev->devno; + int wanted_pio; + + if (adev->dma_mode >= XFER_UDMA_0) { + u16 udma_mode_data; + + dma -= XFER_UDMA_0; + + pci_read_config_word(pdev, ATIIXP_IDE_UDMA_MODE, &udma_mode_data); + udma_mode_data &= ~(0x7 << (4 * dn)); + udma_mode_data |= dma << (4 * dn); + pci_write_config_word(pdev, ATIIXP_IDE_UDMA_MODE, udma_mode_data); + } else { + u16 mwdma_timing_data; + /* Check this is correct - the order is odd in both drivers */ + int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1); + + dma -= XFER_MW_DMA_0; + + pci_read_config_word(pdev, ATIIXP_IDE_MWDMA_TIMING, &mwdma_timing_data); + mwdma_timing_data &= ~(0xFF << timing_shift); + mwdma_timing_data |= (mwdma_timings[dma] << timing_shift); + pci_write_config_word(pdev, ATIIXP_IDE_MWDMA_TIMING, mwdma_timing_data); + } + /* + * We must now look at the PIO mode situation. We may need to + * adjust the PIO mode to keep the timings acceptable + */ + if (adev->dma_mode >= XFER_MW_DMA_2) + wanted_pio = 4; + else if (adev->dma_mode == XFER_MW_DMA_1) + wanted_pio = 3; + else if (adev->dma_mode == XFER_MW_DMA_0) + wanted_pio = 0; + else BUG(); + + if (adev->pio_mode != wanted_pio) + atiixp_set_pio_timing(ap, adev, wanted_pio); +} + +/** + * atiixp_bmdma_start - DMA start callback + * @qc: Command in progress + * + * When DMA begins we need to ensure that the UDMA control + * register for the channel is correctly set. + */ + +static void atiixp_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = (2 * ap->port_no) + adev->devno; + u16 tmp16; + + pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16); + if (adev->dma_mode >= XFER_UDMA_0) + tmp16 |= (1 << dn); + else + tmp16 &= ~(1 << dn); + pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16); + ata_bmdma_start(qc); +} + +/** + * atiixp_dma_stop - DMA stop callback + * @qc: Command in progress + * + * DMA has completed. Clear the UDMA flag as the next operations will + * be PIO ones not UDMA data transfer. + */ + +static void atiixp_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = (2 * ap->port_no) + qc->dev->devno; + u16 tmp16; + + pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16); + tmp16 &= ~(1 << dn); + pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16); + ata_bmdma_stop(qc); +} + +static struct scsi_host_template atiixp_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations atiixp_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = atiixp_set_piomode, + .set_dmamode = atiixp_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = atiixp_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = atiixp_bmdma_start, + .bmdma_stop = atiixp_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .sht = &atiixp_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x06, /* No MWDMA0 support */ + .udma_mask = 0x3F, + .port_ops = &atiixp_port_ops + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + return ata_pci_init_one(dev, port_info, 2); +} + +static struct pci_device_id atiixp[] = { + { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_IDE), }, + { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE), }, + { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), }, + { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), }, + { 0, }, +}; + +static struct pci_driver atiixp_pci_driver = { + .name = DRV_NAME, + .id_table = atiixp, + .probe = atiixp_init_one, + .remove = ata_pci_remove_one +}; + +static int __init atiixp_init(void) +{ + return pci_register_driver(&atiixp_pci_driver); +} + + +static void __exit atiixp_exit(void) +{ + pci_unregister_driver(&atiixp_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for ATI IXP200/300/400"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, atiixp); +MODULE_VERSION(DRV_VERSION); + +module_init(atiixp_init); +module_exit(atiixp_exit); diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c new file mode 100644 index 00000000000..03284611a72 --- /dev/null +++ b/drivers/ata/pata_cmd64x.c @@ -0,0 +1,505 @@ +/* + * pata_cmd64x.c - ATI PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox + * + * Based upon + * linux/drivers/ide/pci/cmd64x.c Version 1.30 Sept 10, 2002 + * + * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines. + * Note, this driver is not used at all on other systems because + * there the "BIOS" has done all of the following already. + * Due to massive hardware bugs, UltraDMA is only supported + * on the 646U2 and not on the 646U. + * + * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) + * Copyright (C) 1998 David S. Miller (davem@redhat.com) + * + * Copyright (C) 1999-2002 Andre Hedrick + * + * TODO + * Testing work + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_cmd64x" +#define DRV_VERSION "0.2.1" + +/* + * CMD64x specific registers definition. + */ + +enum { + CFR = 0x50, + CFR_INTR_CH0 = 0x02, + CNTRL = 0x51, + CNTRL_DIS_RA0 = 0x40, + CNTRL_DIS_RA1 = 0x80, + CNTRL_ENA_2ND = 0x08, + CMDTIM = 0x52, + ARTTIM0 = 0x53, + DRWTIM0 = 0x54, + ARTTIM1 = 0x55, + DRWTIM1 = 0x56, + ARTTIM23 = 0x57, + ARTTIM23_DIS_RA2 = 0x04, + ARTTIM23_DIS_RA3 = 0x08, + ARTTIM23_INTR_CH1 = 0x10, + ARTTIM2 = 0x57, + ARTTIM3 = 0x57, + DRWTIM23 = 0x58, + DRWTIM2 = 0x58, + BRST = 0x59, + DRWTIM3 = 0x5b, + BMIDECR0 = 0x70, + MRDMODE = 0x71, + MRDMODE_INTR_CH0 = 0x04, + MRDMODE_INTR_CH1 = 0x08, + MRDMODE_BLK_CH0 = 0x10, + MRDMODE_BLK_CH1 = 0x20, + BMIDESR0 = 0x72, + UDIDETCR0 = 0x73, + DTPR0 = 0x74, + BMIDECR1 = 0x78, + BMIDECSR = 0x79, + BMIDESR1 = 0x7A, + UDIDETCR1 = 0x7B, + DTPR1 = 0x7C +}; + +static int cmd64x_pre_reset(struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +static int cmd648_pre_reset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 r; + + /* Check cable detect bits */ + pci_read_config_byte(pdev, BMIDECSR, &r); + if (r & (1 << ap->port_no)) + ap->cbl = ATA_CBL_PATA80; + else + ap->cbl = ATA_CBL_PATA40; + + return ata_std_prereset(ap); +} + +static void cmd64x_error_handler(struct ata_port *ap) +{ + return ata_bmdma_drive_eh(ap, cmd64x_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +static void cmd648_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, cmd648_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * cmd64x_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. + */ + +static void cmd64x_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct ata_timing t; + const unsigned long T = 1000000 / 33; + const u8 setup_data[] = { 0x40, 0x40, 0x40, 0x80, 0x00 }; + + u8 reg; + + /* Port layout is not logical so use a table */ + const u8 arttim_port[2][2] = { + { ARTTIM0, ARTTIM1 }, + { ARTTIM23, ARTTIM23 } + }; + const u8 drwtim_port[2][2] = { + { DRWTIM0, DRWTIM1 }, + { DRWTIM2, DRWTIM3 } + }; + + int arttim = arttim_port[ap->port_no][adev->devno]; + int drwtim = drwtim_port[ap->port_no][adev->devno]; + + + if (ata_timing_compute(adev, adev->pio_mode, &t, T, 0) < 0) { + printk(KERN_ERR DRV_NAME ": mode computation failed.\n"); + return; + } + if (ap->port_no) { + /* Slave has shared address setup */ + struct ata_device *pair = ata_dev_pair(adev); + + if (pair) { + struct ata_timing tp; + ata_timing_compute(pair, pair->pio_mode, &tp, T, 0); + ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP); + } + } + + printk(KERN_DEBUG DRV_NAME ": active %d recovery %d setup %d.\n", + t.active, t.recover, t.setup); + if (t.recover > 16) { + t.active += t.recover - 16; + t.recover = 16; + } + if (t.active > 16) + t.active = 16; + + /* Now convert the clocks into values we can actually stuff into + the chip */ + + if (t.recover > 1) + t.recover--; + else + t.recover = 15; + + if (t.setup > 4) + t.setup = 0xC0; + else + t.setup = setup_data[t.setup]; + + t.active &= 0x0F; /* 0 = 16 */ + + /* Load setup timing */ + pci_read_config_byte(pdev, arttim, ®); + reg &= 0x3F; + reg |= t.setup; + pci_write_config_byte(pdev, arttim, reg); + + /* Load active/recovery */ + pci_write_config_byte(pdev, drwtim, (t.active << 4) | t.recover); +} + +/** + * cmd64x_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the DMA mode setup. + */ + +static void cmd64x_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static const u8 udma_data[] = { + 0x31, 0x21, 0x11, 0x25, 0x15, 0x05 + }; + static const u8 mwdma_data[] = { + 0x30, 0x20, 0x10 + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 regU, regD; + + int pciU = UDIDETCR0 + 8 * ap->port_no; + int pciD = BMIDESR0 + 8 * ap->port_no; + int shift = 2 * adev->devno; + + pci_read_config_byte(pdev, pciD, ®D); + pci_read_config_byte(pdev, pciU, ®U); + + regD &= ~(0x20 << shift); + regU &= ~(0x35 << shift); + + if (adev->dma_mode >= XFER_UDMA_0) + regU |= udma_data[adev->dma_mode - XFER_UDMA_0] << shift; + else + regD |= mwdma_data[adev->dma_mode - XFER_MW_DMA_0] << shift; + + regD |= 0x20 << adev->devno; + + pci_write_config_byte(pdev, pciU, regU); + pci_write_config_byte(pdev, pciD, regD); +} + +/** + * cmd648_dma_stop - DMA stop callback + * @qc: Command in progress + * + * DMA has completed. + */ + +static void cmd648_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 dma_intr; + int dma_reg = ap->port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0; + int dma_mask = ap->port_no ? ARTTIM2 : CFR; + + ata_bmdma_stop(qc); + + pci_read_config_byte(pdev, dma_reg, &dma_intr); + pci_write_config_byte(pdev, dma_reg, dma_intr | dma_mask); +} + +/** + * cmd646r1_dma_stop - DMA stop callback + * @qc: Command in progress + * + * Stub for now while investigating the r1 quirk in the old driver. + */ + +static void cmd646r1_bmdma_stop(struct ata_queued_cmd *qc) +{ + ata_bmdma_stop(qc); +} + +static struct scsi_host_template cmd64x_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations cmd64x_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = cmd64x_set_piomode, + .set_dmamode = cmd64x_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = cmd64x_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations cmd646r1_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = cmd64x_set_piomode, + .set_dmamode = cmd64x_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = cmd64x_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = cmd646r1_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations cmd648_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = cmd64x_set_piomode, + .set_dmamode = cmd64x_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = cmd648_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = cmd648_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + u32 class_rev; + + static struct ata_port_info cmd_info[6] = { + { /* CMD 643 - no UDMA */ + .sht = &cmd64x_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &cmd64x_port_ops + }, + { /* CMD 646 with broken UDMA */ + .sht = &cmd64x_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &cmd64x_port_ops + }, + { /* CMD 646 with working UDMA */ + .sht = &cmd64x_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA1, + .port_ops = &cmd64x_port_ops + }, + { /* CMD 646 rev 1 */ + .sht = &cmd64x_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &cmd646r1_port_ops + }, + { /* CMD 648 */ + .sht = &cmd64x_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA2, + .port_ops = &cmd648_port_ops + }, + { /* CMD 649 */ + .sht = &cmd64x_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA3, + .port_ops = &cmd648_port_ops + } + }; + static struct ata_port_info *port_info[2], *info; + u8 mrdmode; + + info = &cmd_info[id->driver_data]; + + pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev); + class_rev &= 0xFF; + + if (id->driver_data == 0) /* 643 */ + ata_pci_clear_simplex(pdev); + + if (pdev->device == PCI_DEVICE_ID_CMD_646) { + /* Does UDMA work ? */ + if (class_rev > 4) + info = &cmd_info[2]; + /* Early rev with other problems ? */ + else if (class_rev == 1) + info = &cmd_info[3]; + } + + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64); + pci_read_config_byte(pdev, MRDMODE, &mrdmode); + mrdmode &= ~ 0x30; /* IRQ set up */ + mrdmode |= 0x02; /* Memory read line enable */ + pci_write_config_byte(pdev, MRDMODE, mrdmode); + + /* Force PIO 0 here.. */ + + /* PPC specific fixup copied from old driver */ +#ifdef CONFIG_PPC + pci_write_config_byte(pdev, UDIDETCR0, 0xF0); +#endif + + port_info[0] = port_info[1] = info; + return ata_pci_init_one(pdev, port_info, 2); +} + +static struct pci_device_id cmd64x[] = { + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_643, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_646, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_648, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4}, + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_649, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5}, + { 0, }, +}; + +static struct pci_driver cmd64x_pci_driver = { + .name = DRV_NAME, + .id_table = cmd64x, + .probe = cmd64x_init_one, + .remove = ata_pci_remove_one +}; + +static int __init cmd64x_init(void) +{ + return pci_register_driver(&cmd64x_pci_driver); +} + + +static void __exit cmd64x_exit(void) +{ + pci_unregister_driver(&cmd64x_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for CMD64x series PATA controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, cmd64x); +MODULE_VERSION(DRV_VERSION); + +module_init(cmd64x_init); +module_exit(cmd64x_exit); diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c new file mode 100644 index 00000000000..792ce482851 --- /dev/null +++ b/drivers/ata/pata_cs5520.c @@ -0,0 +1,336 @@ +/* + * IDE tuning and bus mastering support for the CS5510/CS5520 + * chipsets + * + * The CS5510/CS5520 are slightly unusual devices. Unlike the + * typical IDE controllers they do bus mastering with the drive in + * PIO mode and smarter silicon. + * + * The practical upshot of this is that we must always tune the + * drive for the right PIO mode. We must also ignore all the blacklists + * and the drive bus mastering DMA information. Also to confuse matters + * further we can do DMA on PIO only drives. + * + * DMA on the 5510 also requires we disable_hlt() during DMA on early + * revisions. + * + * *** This driver is strictly experimental *** + * + * (c) Copyright Red Hat Inc 2002 + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * Documentation: + * Not publically available. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_cs5520" +#define DRV_VERSION "0.6.2" + +struct pio_clocks +{ + int address; + int assert; + int recovery; +}; + +static const struct pio_clocks cs5520_pio_clocks[]={ + {3, 6, 11}, + {2, 5, 6}, + {1, 4, 3}, + {1, 3, 2}, + {1, 2, 1} +}; + +/** + * cs5520_set_timings - program PIO timings + * @ap: ATA port + * @adev: ATA device + * + * Program the PIO mode timings for the controller according to the pio + * clocking table. + */ + +static void cs5520_set_timings(struct ata_port *ap, struct ata_device *adev, int pio) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int slave = adev->devno; + + pio -= XFER_PIO_0; + + /* Channel command timing */ + pci_write_config_byte(pdev, 0x62 + ap->port_no, + (cs5520_pio_clocks[pio].recovery << 4) | + (cs5520_pio_clocks[pio].assert)); + /* FIXME: should these use address ? */ + /* Read command timing */ + pci_write_config_byte(pdev, 0x64 + 4*ap->port_no + slave, + (cs5520_pio_clocks[pio].recovery << 4) | + (cs5520_pio_clocks[pio].assert)); + /* Write command timing */ + pci_write_config_byte(pdev, 0x66 + 4*ap->port_no + slave, + (cs5520_pio_clocks[pio].recovery << 4) | + (cs5520_pio_clocks[pio].assert)); +} + +/** + * cs5520_enable_dma - turn on DMA bits + * + * Turn on the DMA bits for this disk. Needed because the BIOS probably + * has not done the work for us. Belongs in the core SATA code. + */ + +static void cs5520_enable_dma(struct ata_port *ap, struct ata_device *adev) +{ + /* Set the DMA enable/disable flag */ + u8 reg = inb(ap->ioaddr.bmdma_addr + 0x02); + reg |= 1<<(adev->devno + 5); + outb(reg, ap->ioaddr.bmdma_addr + 0x02); +} + +/** + * cs5520_set_dmamode - program DMA timings + * @ap: ATA port + * @adev: ATA device + * + * Program the DMA mode timings for the controller according to the pio + * clocking table. Note that this device sets the DMA timings to PIO + * mode values. This may seem bizarre but the 5520 architecture talks + * PIO mode to the disk and DMA mode to the controller so the underlying + * transfers are PIO timed. + */ + +static void cs5520_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static const int dma_xlate[3] = { XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 }; + cs5520_set_timings(ap, adev, dma_xlate[adev->dma_mode]); + cs5520_enable_dma(ap, adev); +} + +/** + * cs5520_set_piomode - program PIO timings + * @ap: ATA port + * @adev: ATA device + * + * Program the PIO mode timings for the controller according to the pio + * clocking table. We know pio_mode will equal dma_mode because of the + * CS5520 architecture. At least once we turned DMA on and wrote a + * mode setter. + */ + +static void cs5520_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + cs5520_set_timings(ap, adev, adev->pio_mode); +} + + +static int cs5520_pre_reset(struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +static void cs5520_error_handler(struct ata_port *ap) +{ + return ata_bmdma_drive_eh(ap, cs5520_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +static struct scsi_host_template cs5520_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations cs5520_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = cs5520_set_piomode, + .set_dmamode = cs5520_set_dmamode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = cs5520_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .eng_timeout = ata_eng_timeout, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + +static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + u8 pcicfg; + static struct ata_probe_ent probe[2]; + int ports = 0; + + /* IDE port enable bits */ + pci_read_config_byte(dev, 0x60, &pcicfg); + + /* Check if the ATA ports are enabled */ + if ((pcicfg & 3) == 0) + return -ENODEV; + + if ((pcicfg & 0x40) == 0) { + printk(KERN_WARNING DRV_NAME ": DMA mode disabled. Enabling.\n"); + pci_write_config_byte(dev, 0x60, pcicfg | 0x40); + } + + /* Perform set up for DMA */ + if (pci_enable_device_bars(dev, 1<<2)) { + printk(KERN_ERR DRV_NAME ": unable to configure BAR2.\n"); + return -ENODEV; + } + pci_set_master(dev); + if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) { + printk(KERN_ERR DRV_NAME ": unable to configure DMA mask.\n"); + return -ENODEV; + } + if (pci_set_consistent_dma_mask(dev, DMA_32BIT_MASK)) { + printk(KERN_ERR DRV_NAME ": unable to configure consistent DMA mask.\n"); + return -ENODEV; + } + + /* We have to do our own plumbing as the PCI setup for this + chipset is non-standard so we can't punt to the libata code */ + + INIT_LIST_HEAD(&probe[0].node); + probe[0].dev = pci_dev_to_dev(dev); + probe[0].port_ops = &cs5520_port_ops; + probe[0].sht = &cs5520_sht; + probe[0].pio_mask = 0x1F; + probe[0].mwdma_mask = id->driver_data; + probe[0].irq = 14; + probe[0].irq_flags = 0; + probe[0].port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST; + probe[0].n_ports = 1; + probe[0].port[0].cmd_addr = 0x1F0; + probe[0].port[0].ctl_addr = 0x3F6; + probe[0].port[0].altstatus_addr = 0x3F6; + probe[0].port[0].bmdma_addr = pci_resource_start(dev, 2); + + /* The secondary lurks at different addresses but is otherwise + the same beastie */ + + probe[1] = probe[0]; + INIT_LIST_HEAD(&probe[1].node); + probe[1].irq = 15; + probe[1].port[0].cmd_addr = 0x170; + probe[1].port[0].ctl_addr = 0x376; + probe[1].port[0].altstatus_addr = 0x376; + probe[1].port[0].bmdma_addr = pci_resource_start(dev, 2) + 8; + + /* Let libata fill in the port details */ + ata_std_ports(&probe[0].port[0]); + ata_std_ports(&probe[1].port[0]); + + /* Now add the ports that are active */ + if (pcicfg & 1) + ports += ata_device_add(&probe[0]); + if (pcicfg & 2) + ports += ata_device_add(&probe[1]); + if (ports) + return 0; + return -ENODEV; +} + +/** + * cs5520_remove_one - device unload + * @pdev: PCI device being removed + * + * Handle an unplug/unload event for a PCI device. Unload the + * PCI driver but do not use the default handler as we manage + * resources ourself and *MUST NOT* disable the device as it has + * other functions. + */ + +static void __devexit cs5520_remove_one(struct pci_dev *pdev) +{ + struct device *dev = pci_dev_to_dev(pdev); + struct ata_host *host = dev_get_drvdata(dev); + + ata_host_remove(host); + dev_set_drvdata(dev, NULL); +} + +/* For now keep DMA off. We can set it for all but A rev CS5510 once the + core ATA code can handle it */ + +static struct pci_device_id pata_cs5520[] = { + { PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510), }, + { PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520), }, + { 0, }, +}; + +static struct pci_driver cs5520_pci_driver = { + .name = DRV_NAME, + .id_table = pata_cs5520, + .probe = cs5520_init_one, + .remove = cs5520_remove_one +}; + + +static int __init cs5520_init(void) +{ + return pci_register_driver(&cs5520_pci_driver); +} + +static void __exit cs5520_exit(void) +{ + pci_unregister_driver(&cs5520_pci_driver); +} + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Cyrix CS5510/5520"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, pata_cs5520); +MODULE_VERSION(DRV_VERSION); + +module_init(cs5520_init); +module_exit(cs5520_exit); + diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c new file mode 100644 index 00000000000..f3d8a3bc1e7 --- /dev/null +++ b/drivers/ata/pata_cs5530.c @@ -0,0 +1,387 @@ +/* + * pata-cs5530.c - CS5530 PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox + * + * based upon cs5530.c by Mark Lord. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Loosely based on the piix & svwks drivers. + * + * Documentation: + * Available from AMD web site. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_cs5530" +#define DRV_VERSION "0.6" + +/** + * cs5530_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Set our PIO requirements. This is fairly simple on the CS5530 + * chips. + */ + +static void cs5530_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + static const unsigned int cs5530_pio_timings[2][5] = { + {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010}, + {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010} + }; + unsigned long base = ( ap->ioaddr.bmdma_addr & ~0x0F) + 0x20 + 0x10 * ap->port_no; + u32 tuning; + int format; + + /* Find out which table to use */ + tuning = inl(base + 0x04); + format = (tuning & 0x80000000UL) ? 1 : 0; + + /* Now load the right timing register */ + if (adev->devno) + base += 0x08; + + outl(cs5530_pio_timings[format][adev->pio_mode - XFER_PIO_0], base); +} + +/** + * cs5530_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + * We cannot mix MWDMA and UDMA without reloading timings each switch + * master to slave. We track the last DMA setup in order to minimise + * reloads. + */ + +static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + unsigned long base = ( ap->ioaddr.bmdma_addr & ~0x0F) + 0x20 + 0x10 * ap->port_no; + u32 tuning, timing = 0; + u8 reg; + + /* Find out which table to use */ + tuning = inl(base + 0x04); + + switch(adev->dma_mode) { + case XFER_UDMA_0: + timing = 0x00921250;break; + case XFER_UDMA_1: + timing = 0x00911140;break; + case XFER_UDMA_2: + timing = 0x00911030;break; + case XFER_MW_DMA_0: + timing = 0x00077771;break; + case XFER_MW_DMA_1: + timing = 0x00012121;break; + case XFER_MW_DMA_2: + timing = 0x00002020;break; + default: + BUG(); + } + /* Merge in the PIO format bit */ + timing |= (tuning & 0x80000000UL); + if (adev->devno == 0) /* Master */ + outl(timing, base + 0x04); + else { + if (timing & 0x00100000) + tuning |= 0x00100000; /* UDMA for both */ + else + tuning &= ~0x00100000; /* MWDMA for both */ + outl(tuning, base + 0x04); + outl(timing, base + 0x0C); + } + + /* Set the DMA capable bit in the BMDMA area */ + reg = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + reg |= (1 << (5 + adev->devno)); + outb(reg, ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + + /* Remember the last DMA setup we did */ + + ap->private_data = adev; +} + +/** + * cs5530_qc_issue_prot - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings if + * neccessary. Specifically we have a problem that there is only + * one MWDMA/UDMA bit. + */ + +static unsigned int cs5530_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct ata_device *prev = ap->private_data; + + /* See if the DMA settings could be wrong */ + if (adev->dma_mode != 0 && adev != prev && prev != NULL) { + /* Maybe, but do the channels match MWDMA/UDMA ? */ + if ((adev->dma_mode >= XFER_UDMA_0 && prev->dma_mode < XFER_UDMA_0) || + (adev->dma_mode < XFER_UDMA_0 && prev->dma_mode >= XFER_UDMA_0)) + /* Switch the mode bits */ + cs5530_set_dmamode(ap, adev); + } + + return ata_qc_issue_prot(qc); +} + +static int cs5530_pre_reset(struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +static void cs5530_error_handler(struct ata_port *ap) +{ + return ata_bmdma_drive_eh(ap, cs5530_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + + +static struct scsi_host_template cs5530_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations cs5530_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = cs5530_set_piomode, + .set_dmamode = cs5530_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = cs5530_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .qc_prep = ata_qc_prep, + .qc_issue = cs5530_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct dmi_system_id palmax_dmi_table[] = { + { + .ident = "Palmax PD1100", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Cyrix"), + DMI_MATCH(DMI_PRODUCT_NAME, "Caddis"), + }, + }, + { } +}; + +static int cs5530_is_palmax(void) +{ + if (dmi_check_system(palmax_dmi_table)) { + printk(KERN_INFO "Palmax PD1100: Disabling DMA on docking port.\n"); + return 1; + } + return 0; +} + +/** + * cs5530_init_one - Initialise a CS5530 + * @dev: PCI device + * @id: Entry in match table + * + * Install a driver for the newly found CS5530 companion chip. Most of + * this is just housekeeping. We have to set the chip up correctly and + * turn off various bits of emulation magic. + */ + +static int cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + int compiler_warning_pointless_fix; + struct pci_dev *master_0 = NULL, *cs5530_0 = NULL; + static struct ata_port_info info = { + .sht = &cs5530_sht, + .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x07, + .port_ops = &cs5530_port_ops + }; + /* The docking connector doesn't do UDMA, and it seems not MWDMA */ + static struct ata_port_info info_palmax_secondary = { + .sht = &cs5530_sht, + .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, + .pio_mask = 0x1f, + .port_ops = &cs5530_port_ops + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + + dev = NULL; + while ((dev = pci_get_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) { + switch (dev->device) { + case PCI_DEVICE_ID_CYRIX_PCI_MASTER: + master_0 = pci_dev_get(dev); + break; + case PCI_DEVICE_ID_CYRIX_5530_LEGACY: + cs5530_0 = pci_dev_get(dev); + break; + } + } + if (!master_0) { + printk(KERN_ERR DRV_NAME ": unable to locate PCI MASTER function\n"); + goto fail_put; + } + if (!cs5530_0) { + printk(KERN_ERR DRV_NAME ": unable to locate CS5530 LEGACY function\n"); + goto fail_put; + } + + pci_set_master(cs5530_0); + compiler_warning_pointless_fix = pci_set_mwi(cs5530_0); + + /* + * Set PCI CacheLineSize to 16-bytes: + * --> Write 0x04 into 8-bit PCI CACHELINESIZE reg of function 0 of the cs5530 + * + * Note: This value is constant because the 5530 is only a Geode companion + */ + + pci_write_config_byte(cs5530_0, PCI_CACHE_LINE_SIZE, 0x04); + + /* + * Disable trapping of UDMA register accesses (Win98 hack): + * --> Write 0x5006 into 16-bit reg at offset 0xd0 of function 0 of the cs5530 + */ + + pci_write_config_word(cs5530_0, 0xd0, 0x5006); + + /* + * Bit-1 at 0x40 enables MemoryWriteAndInvalidate on internal X-bus: + * The other settings are what is necessary to get the register + * into a sane state for IDE DMA operation. + */ + + pci_write_config_byte(master_0, 0x40, 0x1e); + + /* + * Set max PCI burst size (16-bytes seems to work best): + * 16bytes: set bit-1 at 0x41 (reg value of 0x16) + * all others: clear bit-1 at 0x41, and do: + * 128bytes: OR 0x00 at 0x41 + * 256bytes: OR 0x04 at 0x41 + * 512bytes: OR 0x08 at 0x41 + * 1024bytes: OR 0x0c at 0x41 + */ + + pci_write_config_byte(master_0, 0x41, 0x14); + + /* + * These settings are necessary to get the chip + * into a sane state for IDE DMA operation. + */ + + pci_write_config_byte(master_0, 0x42, 0x00); + pci_write_config_byte(master_0, 0x43, 0xc1); + + pci_dev_put(master_0); + pci_dev_put(cs5530_0); + + if (cs5530_is_palmax()) + port_info[1] = &info_palmax_secondary; + + /* Now kick off ATA set up */ + return ata_pci_init_one(dev, port_info, 2); + +fail_put: + if (master_0) + pci_dev_put(master_0); + if (cs5530_0) + pci_dev_put(cs5530_0); + return -ENODEV; +} + +static struct pci_device_id cs5530[] = { + { PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE), }, + { 0, }, +}; + +static struct pci_driver cs5530_pci_driver = { + .name = DRV_NAME, + .id_table = cs5530, + .probe = cs5530_init_one, + .remove = ata_pci_remove_one +}; + +static int __init cs5530_init(void) +{ + return pci_register_driver(&cs5530_pci_driver); +} + + +static void __exit cs5530_exit(void) +{ + pci_unregister_driver(&cs5530_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for the Cyrix/NS/AMD 5530"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, cs5530); +MODULE_VERSION(DRV_VERSION); + +module_init(cs5530_init); +module_exit(cs5530_exit); diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c new file mode 100644 index 00000000000..69d6b425872 --- /dev/null +++ b/drivers/ata/pata_cs5535.c @@ -0,0 +1,291 @@ +/* + * pata-cs5535.c - CS5535 PATA for new ATA layer + * (C) 2005-2006 Red Hat Inc + * Alan Cox + * + * based upon cs5535.c from AMD as cleaned up and + * made readable and Linux style by Wolfgang Zuleger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Loosely based on the piix & svwks drivers. + * + * Documentation: + * Available from AMD web site. + * TODO + * Review errata to see if serializing is neccessary + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "cs5535" +#define DRV_VERSION "0.2.10" + +/* + * The Geode (Aka Athlon GX now) uses an internal MSR based + * bus system for control. Demented but there you go. + */ + +#define MSR_ATAC_BASE 0x51300000 +#define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0) +#define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01) +#define ATAC_GLD_MSR_SMI (MSR_ATAC_BASE+0x02) +#define ATAC_GLD_MSR_ERROR (MSR_ATAC_BASE+0x03) +#define ATAC_GLD_MSR_PM (MSR_ATAC_BASE+0x04) +#define ATAC_GLD_MSR_DIAG (MSR_ATAC_BASE+0x05) +#define ATAC_IO_BAR (MSR_ATAC_BASE+0x08) +#define ATAC_RESET (MSR_ATAC_BASE+0x10) +#define ATAC_CH0D0_PIO (MSR_ATAC_BASE+0x20) +#define ATAC_CH0D0_DMA (MSR_ATAC_BASE+0x21) +#define ATAC_CH0D1_PIO (MSR_ATAC_BASE+0x22) +#define ATAC_CH0D1_DMA (MSR_ATAC_BASE+0x23) +#define ATAC_PCI_ABRTERR (MSR_ATAC_BASE+0x24) + +#define ATAC_BM0_CMD_PRIM 0x00 +#define ATAC_BM0_STS_PRIM 0x02 +#define ATAC_BM0_PRD 0x04 + +#define CS5535_CABLE_DETECT 0x48 + +#define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL)==0x00009172 ) + +/** + * cs5535_pre_reset - detect cable type + * @ap: Port to detect on + * + * Perform cable detection for ATA66 capable cable. Return a libata + * cable type. + */ + +static int cs5535_pre_reset(struct ata_port *ap) +{ + u8 cable; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + pci_read_config_byte(pdev, CS5535_CABLE_DETECT, &cable); + if (cable & 1) + ap->cbl = ATA_CBL_PATA80; + else + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +/** + * cs5535_error_handler - reset/probe + * @ap: Port to reset + * + * Reset and configure a port + */ + +static void cs5535_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, cs5535_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * cs5535_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Set our PIO requirements. The CS5535 is pretty clean about all this + */ + +static void cs5535_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + static const u16 pio_timings[5] = { + 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 + }; + static const u16 pio_cmd_timings[5] = { + 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 + }; + u32 reg, dummy; + struct ata_device *pair = ata_dev_pair(adev); + + int mode = adev->pio_mode - XFER_PIO_0; + int cmdmode = mode; + + /* Command timing has to be for the lowest of the pair of devices */ + if (pair) { + int pairmode = pair->pio_mode - XFER_PIO_0; + cmdmode = min(mode, pairmode); + /* Write the other drive timing register if it changed */ + if (cmdmode < pairmode) + wrmsr(ATAC_CH0D0_PIO + 2 * pair->devno, + pio_cmd_timings[cmdmode] << 16 | pio_timings[pairmode], 0); + } + /* Write the drive timing register */ + wrmsr(ATAC_CH0D0_PIO + 2 * adev->devno, + pio_cmd_timings[cmdmode] << 16 | pio_timings[mode], 0); + + /* Set the PIO "format 1" bit in the DMA timing register */ + rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy); + wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg | 0x80000000UL, 0); +} + +/** + * cs5535_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + */ + +static void cs5535_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static const u32 udma_timings[5] = { + 0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061 + }; + static const u32 mwdma_timings[3] = { + 0x7F0FFFF3, 0x7F035352, 0x7F024241 + }; + u32 reg, dummy; + int mode = adev->dma_mode; + + rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy); + reg &= 0x80000000UL; + if (mode >= XFER_UDMA_0) + reg |= udma_timings[mode - XFER_UDMA_0]; + else + reg |= mwdma_timings[mode - XFER_MW_DMA_0]; + wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, 0); +} + +static struct scsi_host_template cs5535_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations cs5535_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = cs5535_set_piomode, + .set_dmamode = cs5535_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = cs5535_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * cs5535_init_one - Initialise a CS5530 + * @dev: PCI device + * @id: Entry in match table + * + * Install a driver for the newly found CS5530 companion chip. Most of + * this is just housekeeping. We have to set the chip up correctly and + * turn off various bits of emulation magic. + */ + +static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .sht = &cs5535_sht, + .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x1f, + .port_ops = &cs5535_port_ops + }; + struct ata_port_info *ports[1] = { &info }; + + u32 timings, dummy; + + /* Check the BIOS set the initial timing clock. If not set the + timings for PIO0 */ + rdmsr(ATAC_CH0D0_PIO, timings, dummy); + if (CS5535_BAD_PIO(timings)) + wrmsr(ATAC_CH0D0_PIO, 0xF7F4F7F4UL, 0); + rdmsr(ATAC_CH0D1_PIO, timings, dummy); + if (CS5535_BAD_PIO(timings)) + wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0); + return ata_pci_init_one(dev, ports, 1); +} + +static struct pci_device_id cs5535[] = { + { PCI_DEVICE(PCI_VENDOR_ID_NS, 0x002D), }, + { 0, }, +}; + +static struct pci_driver cs5535_pci_driver = { + .name = DRV_NAME, + .id_table = cs5535, + .probe = cs5535_init_one, + .remove = ata_pci_remove_one +}; + +static int __init cs5535_init(void) +{ + return pci_register_driver(&cs5535_pci_driver); +} + + +static void __exit cs5535_exit(void) +{ + pci_unregister_driver(&cs5535_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox, Jens Altmann, Wolfgan Zuleger, Alexander Kiausch"); +MODULE_DESCRIPTION("low-level driver for the NS/AMD 5530"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, cs5535); +MODULE_VERSION(DRV_VERSION); + +module_init(cs5535_init); +module_exit(cs5535_exit); diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c new file mode 100644 index 00000000000..322043d8cf7 --- /dev/null +++ b/drivers/ata/pata_cypress.c @@ -0,0 +1,227 @@ +/* + * pata_cypress.c - Cypress PATA for new ATA layer + * (C) 2006 Red Hat Inc + * Alan Cox + * + * Based heavily on + * linux/drivers/ide/pci/cy82c693.c Version 0.40 Sep. 10, 2002 + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_cypress" +#define DRV_VERSION "0.1.2" + +/* here are the offset definitions for the registers */ + +enum { + CY82_IDE_CMDREG = 0x04, + CY82_IDE_ADDRSETUP = 0x48, + CY82_IDE_MASTER_IOR = 0x4C, + CY82_IDE_MASTER_IOW = 0x4D, + CY82_IDE_SLAVE_IOR = 0x4E, + CY82_IDE_SLAVE_IOW = 0x4F, + CY82_IDE_MASTER_8BIT = 0x50, + CY82_IDE_SLAVE_8BIT = 0x51, + + CY82_INDEX_PORT = 0x22, + CY82_DATA_PORT = 0x23, + + CY82_INDEX_CTRLREG1 = 0x01, + CY82_INDEX_CHANNEL0 = 0x30, + CY82_INDEX_CHANNEL1 = 0x31, + CY82_INDEX_TIMEOUT = 0x32 +}; + +static int cy82c693_pre_reset(struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +static void cy82c693_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, cy82c693_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * cy82c693_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. + */ + +static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct ata_timing t; + const unsigned long T = 1000000 / 33; + short time_16, time_8; + u32 addr; + + if (ata_timing_compute(adev, adev->pio_mode, &t, T, 1) < 0) { + printk(KERN_ERR DRV_NAME ": mome computation failed.\n"); + return; + } + + time_16 = FIT(t.recover, 0, 15) | (FIT(t.active, 0, 15) << 4); + time_8 = FIT(t.act8b, 0, 15) | (FIT(t.rec8b, 0, 15) << 4); + + if (adev->devno == 0) { + pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr); + + addr &= ~0x0F; /* Mask bits */ + addr |= FIT(t.setup, 0, 15); + + pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr); + pci_write_config_byte(pdev, CY82_IDE_MASTER_IOR, time_16); + pci_write_config_byte(pdev, CY82_IDE_MASTER_IOW, time_16); + pci_write_config_byte(pdev, CY82_IDE_MASTER_8BIT, time_8); + } else { + pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr); + + addr &= ~0xF0; /* Mask bits */ + addr |= (FIT(t.setup, 0, 15) << 4); + + pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr); + pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOR, time_16); + pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOW, time_16); + pci_write_config_byte(pdev, CY82_IDE_SLAVE_8BIT, time_8); + } +} + +/** + * cy82c693_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the DMA mode setup. + */ + +static void cy82c693_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + int reg = CY82_INDEX_CHANNEL0 + ap->port_no; + + /* Be afraid, be very afraid. Magic registers in low I/O space */ + outb(reg, 0x22); + outb(adev->dma_mode - XFER_MW_DMA_0, 0x23); + + /* 0x50 gives the best behaviour on the Alpha's using this chip */ + outb(CY82_INDEX_TIMEOUT, 0x22); + outb(0x50, 0x23); +} + +static struct scsi_host_template cy82c693_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations cy82c693_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = cy82c693_set_piomode, + .set_dmamode = cy82c693_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = cy82c693_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .sht = &cy82c693_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &cy82c693_port_ops + }; + static struct ata_port_info *port_info[1] = { &info }; + + /* Devfn 1 is the ATA primary. The secondary is magic and on devfn2. For the + moment we don't handle the secondary. FIXME */ + + if (PCI_FUNC(pdev->devfn) != 1) + return -ENODEV; + + return ata_pci_init_one(pdev, port_info, 1); +} + +static struct pci_device_id cy82c693[] = { + { PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { 0, }, +}; + +static struct pci_driver cy82c693_pci_driver = { + .name = DRV_NAME, + .id_table = cy82c693, + .probe = cy82c693_init_one, + .remove = ata_pci_remove_one +}; + +static int __init cy82c693_init(void) +{ + return pci_register_driver(&cy82c693_pci_driver); +} + + +static void __exit cy82c693_exit(void) +{ + pci_unregister_driver(&cy82c693_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for the CY82C693 PATA controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, cy82c693); +MODULE_VERSION(DRV_VERSION); + +module_init(cy82c693_init); +module_exit(cy82c693_exit); diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c new file mode 100644 index 00000000000..c30bc181304 --- /dev/null +++ b/drivers/ata/pata_efar.c @@ -0,0 +1,342 @@ +/* + * pata_efar.c - EFAR PIIX clone controller driver + * + * (C) 2005 Red Hat + * + * Some parts based on ata_piix.c by Jeff Garzik and others. + * + * The EFAR is a PIIX4 clone with UDMA66 support. Unlike the later + * Intel ICH controllers the EFAR widened the UDMA mode register bits + * and doesn't require the funky clock selection. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_efar" +#define DRV_VERSION "0.4.1" + +/** + * efar_pre_reset - check for 40/80 pin + * @ap: Port + * + * Perform cable detection for the EFAR ATA interface. This is + * different to the PIIX arrangement + */ + +static int efar_pre_reset(struct ata_port *ap) +{ + static const struct pci_bits efar_enable_bits[] = { + { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */ + { 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */ + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 tmp; + + if (!pci_test_config_bits(pdev, &efar_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + pci_read_config_byte(pdev, 0x47, &tmp); + if (tmp & (2 >> ap->port_no)) + ap->cbl = ATA_CBL_PATA40; + else + ap->cbl = ATA_CBL_PATA80; + return ata_std_prereset(ap); +} + +/** + * efar_probe_reset - Probe specified port on PATA host controller + * @ap: Port to probe + * + * LOCKING: + * None (inherited from caller). + */ + +static void efar_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, efar_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * efar_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: um + * + * Set PIO mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + struct pci_dev *dev = to_pci_dev(ap->host->dev); + unsigned int idetm_port= ap->port_no ? 0x42 : 0x40; + u16 idetm_data; + int control = 0; + + /* + * See Intel Document 298600-004 for the timing programing rules + * for PIIX/ICH. The EFAR is a clone so very similar + */ + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + if (pio > 2) + control |= 1; /* TIME1 enable */ + if (ata_pio_need_iordy(adev)) /* PIO 3/4 require IORDY */ + control |= 2; /* IE enable */ + /* Intel specifies that the PPE functionality is for disk only */ + if (adev->class == ATA_DEV_ATA) + control |= 4; /* PPE enable */ + + pci_read_config_word(dev, idetm_port, &idetm_data); + + /* Enable PPE, IE and TIME as appropriate */ + + if (adev->devno == 0) { + idetm_data &= 0xCCF0; + idetm_data |= control; + idetm_data |= (timings[pio][0] << 12) | + (timings[pio][1] << 8); + } else { + int shift = 4 * ap->port_no; + u8 slave_data; + + idetm_data &= 0xCC0F; + idetm_data |= (control << 4); + + /* Slave timing in seperate register */ + pci_read_config_byte(dev, 0x44, &slave_data); + slave_data &= 0x0F << shift; + slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << shift; + pci_write_config_byte(dev, 0x44, slave_data); + } + + idetm_data |= 0x4000; /* Ensure SITRE is enabled */ + pci_write_config_word(dev, idetm_port, idetm_data); +} + +/** + * efar_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set UDMA/MWDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void efar_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *dev = to_pci_dev(ap->host->dev); + u8 master_port = ap->port_no ? 0x42 : 0x40; + u16 master_data; + u8 speed = adev->dma_mode; + int devid = adev->devno + 2 * ap->port_no; + u8 udma_enable; + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + pci_read_config_word(dev, master_port, &master_data); + pci_read_config_byte(dev, 0x48, &udma_enable); + + if (speed >= XFER_UDMA_0) { + unsigned int udma = adev->dma_mode - XFER_UDMA_0; + u16 udma_timing; + + udma_enable |= (1 << devid); + + /* Load the UDMA mode number */ + pci_read_config_word(dev, 0x4A, &udma_timing); + udma_timing &= ~(7 << (4 * devid)); + udma_timing |= udma << (4 * devid); + pci_write_config_word(dev, 0x4A, udma_timing); + } else { + /* + * MWDMA is driven by the PIO timings. We must also enable + * IORDY unconditionally along with TIME1. PPE has already + * been set when the PIO timing was set. + */ + unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0; + unsigned int control; + u8 slave_data; + const unsigned int needed_pio[3] = { + XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 + }; + int pio = needed_pio[mwdma] - XFER_PIO_0; + + control = 3; /* IORDY|TIME1 */ + + /* If the drive MWDMA is faster than it can do PIO then + we must force PIO into PIO0 */ + + if (adev->pio_mode < needed_pio[mwdma]) + /* Enable DMA timing only */ + control |= 8; /* PIO cycles in PIO0 */ + + if (adev->devno) { /* Slave */ + master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */ + master_data |= control << 4; + pci_read_config_byte(dev, 0x44, &slave_data); + slave_data &= (0x0F + 0xE1 * ap->port_no); + /* Load the matching timing */ + slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0); + pci_write_config_byte(dev, 0x44, slave_data); + } else { /* Master */ + master_data &= 0xCCF4; /* Mask out IORDY|TIME1|DMAONLY + and master timing bits */ + master_data |= control; + master_data |= + (timings[pio][0] << 12) | + (timings[pio][1] << 8); + } + udma_enable &= ~(1 << devid); + pci_write_config_word(dev, master_port, master_data); + } + pci_write_config_byte(dev, 0x48, udma_enable); +} + +static struct scsi_host_template efar_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations efar_ops = { + .port_disable = ata_port_disable, + .set_piomode = efar_set_piomode, + .set_dmamode = efar_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = efar_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .eng_timeout = ata_eng_timeout, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + + +/** + * efar_init_one - Register EFAR ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in efar_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + static struct ata_port_info info = { + .sht = &efar_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma1-2 */ + .udma_mask = 0x0f, /* UDMA 66 */ + .port_ops = &efar_ops, + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, + "version " DRV_VERSION "\n"); + + return ata_pci_init_one(pdev, port_info, 2); +} + +static const struct pci_device_id efar_pci_tbl[] = { + { 0x1055, 0x9130, PCI_ANY_ID, PCI_ANY_ID, }, + { } /* terminate list */ +}; + +static struct pci_driver efar_pci_driver = { + .name = DRV_NAME, + .id_table = efar_pci_tbl, + .probe = efar_init_one, + .remove = ata_pci_remove_one, +}; + +static int __init efar_init(void) +{ + return pci_register_driver(&efar_pci_driver); +} + +static void __exit efar_exit(void) +{ + pci_unregister_driver(&efar_pci_driver); +} + + +module_init(efar_init); +module_exit(efar_exit); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for EFAR PIIX clones"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, efar_pci_tbl); +MODULE_VERSION(DRV_VERSION); + diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c new file mode 100644 index 00000000000..e54a0c51681 --- /dev/null +++ b/drivers/ata/pata_hpt366.c @@ -0,0 +1,478 @@ +/* + * Libata driver for the highpoint 366 and 368 UDMA66 ATA controllers. + * + * This driver is heavily based upon: + * + * linux/drivers/ide/pci/hpt366.c Version 0.36 April 25, 2003 + * + * Copyright (C) 1999-2003 Andre Hedrick + * Portions Copyright (C) 2001 Sun Microsystems, Inc. + * Portions Copyright (C) 2003 Red Hat Inc + * + * + * TODO + * Maybe PLL mode + * Look into engine reset on timeout errors. Should not be + * required. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_hpt366" +#define DRV_VERSION "0.5" + +struct hpt_clock { + u8 xfer_speed; + u32 timing; +}; + +/* key for bus clock timings + * bit + * 0:3 data_high_time. inactive time of DIOW_/DIOR_ for PIO and MW + * DMA. cycles = value + 1 + * 4:8 data_low_time. active time of DIOW_/DIOR_ for PIO and MW + * DMA. cycles = value + 1 + * 9:12 cmd_high_time. inactive time of DIOW_/DIOR_ during task file + * register access. + * 13:17 cmd_low_time. active time of DIOW_/DIOR_ during task file + * register access. + * 18:21 udma_cycle_time. clock freq and clock cycles for UDMA xfer. + * during task file register access. + * 22:24 pre_high_time. time to initialize 1st cycle for PIO and MW DMA + * xfer. + * 25:27 cmd_pre_high_time. time to initialize 1st PIO cycle for task + * register access. + * 28 UDMA enable + * 29 DMA enable + * 30 PIO_MST enable. if set, the chip is in bus master mode during + * PIO. + * 31 FIFO enable. + */ + +static const struct hpt_clock hpt366_40[] = { + { XFER_UDMA_4, 0x900fd943 }, + { XFER_UDMA_3, 0x900ad943 }, + { XFER_UDMA_2, 0x900bd943 }, + { XFER_UDMA_1, 0x9008d943 }, + { XFER_UDMA_0, 0x9008d943 }, + + { XFER_MW_DMA_2, 0xa008d943 }, + { XFER_MW_DMA_1, 0xa010d955 }, + { XFER_MW_DMA_0, 0xa010d9fc }, + + { XFER_PIO_4, 0xc008d963 }, + { XFER_PIO_3, 0xc010d974 }, + { XFER_PIO_2, 0xc010d997 }, + { XFER_PIO_1, 0xc010d9c7 }, + { XFER_PIO_0, 0xc018d9d9 }, + { 0, 0x0120d9d9 } +}; + +static const struct hpt_clock hpt366_33[] = { + { XFER_UDMA_4, 0x90c9a731 }, + { XFER_UDMA_3, 0x90cfa731 }, + { XFER_UDMA_2, 0x90caa731 }, + { XFER_UDMA_1, 0x90cba731 }, + { XFER_UDMA_0, 0x90c8a731 }, + + { XFER_MW_DMA_2, 0xa0c8a731 }, + { XFER_MW_DMA_1, 0xa0c8a732 }, /* 0xa0c8a733 */ + { XFER_MW_DMA_0, 0xa0c8a797 }, + + { XFER_PIO_4, 0xc0c8a731 }, + { XFER_PIO_3, 0xc0c8a742 }, + { XFER_PIO_2, 0xc0d0a753 }, + { XFER_PIO_1, 0xc0d0a7a3 }, /* 0xc0d0a793 */ + { XFER_PIO_0, 0xc0d0a7aa }, /* 0xc0d0a7a7 */ + { 0, 0x0120a7a7 } +}; + +static const struct hpt_clock hpt366_25[] = { + { XFER_UDMA_4, 0x90c98521 }, + { XFER_UDMA_3, 0x90cf8521 }, + { XFER_UDMA_2, 0x90cf8521 }, + { XFER_UDMA_1, 0x90cb8521 }, + { XFER_UDMA_0, 0x90cb8521 }, + + { XFER_MW_DMA_2, 0xa0ca8521 }, + { XFER_MW_DMA_1, 0xa0ca8532 }, + { XFER_MW_DMA_0, 0xa0ca8575 }, + + { XFER_PIO_4, 0xc0ca8521 }, + { XFER_PIO_3, 0xc0ca8532 }, + { XFER_PIO_2, 0xc0ca8542 }, + { XFER_PIO_1, 0xc0d08572 }, + { XFER_PIO_0, 0xc0d08585 }, + { 0, 0x01208585 } +}; + +static const char *bad_ata33[] = { + "Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3", "Maxtor 90845U3", "Maxtor 90650U2", + "Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5", "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2", + "Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6", "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4", + "Maxtor 90510D4", + "Maxtor 90432D3", "Maxtor 90288D2", "Maxtor 90256D2", + "Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7", "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4", + "Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5", "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2", + NULL +}; + +static const char *bad_ata66_4[] = { + "IBM-DTLA-307075", + "IBM-DTLA-307060", + "IBM-DTLA-307045", + "IBM-DTLA-307030", + "IBM-DTLA-307020", + "IBM-DTLA-307015", + "IBM-DTLA-305040", + "IBM-DTLA-305030", + "IBM-DTLA-305020", + "IC35L010AVER07-0", + "IC35L020AVER07-0", + "IC35L030AVER07-0", + "IC35L040AVER07-0", + "IC35L060AVER07-0", + "WDC AC310200R", + NULL +}; + +static const char *bad_ata66_3[] = { + "WDC AC310200R", + NULL +}; + +static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, const char *list[]) +{ + unsigned char model_num[40]; + char *s; + unsigned int len; + int i = 0; + + ata_id_string(dev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num)); + s = &model_num[0]; + len = strnlen(s, sizeof(model_num)); + + /* ATAPI specifies that empty space is blank-filled; remove blanks */ + while ((len > 0) && (s[len - 1] == ' ')) { + len--; + s[len] = 0; + } + + while(list[i] != NULL) { + if (!strncmp(list[i], s, len)) { + printk(KERN_WARNING DRV_NAME ": %s is not supported for %s.\n", + modestr, list[i]); + return 1; + } + i++; + } + return 0; +} + +/** + * hpt366_filter - mode selection filter + * @ap: ATA interface + * @adev: ATA device + * + * Block UDMA on devices that cause trouble with this controller. + */ + +static unsigned long hpt366_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask) +{ + if (adev->class == ATA_DEV_ATA) { + if (hpt_dma_blacklisted(adev, "UDMA", bad_ata33)) + mask &= ~ATA_MASK_UDMA; + if (hpt_dma_blacklisted(adev, "UDMA3", bad_ata66_3)) + mask &= ~(0x07 << ATA_SHIFT_UDMA); + if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4)) + mask &= ~(0x0F << ATA_SHIFT_UDMA); + } + return ata_pci_default_filter(ap, adev, mask); +} + +/** + * hpt36x_find_mode - reset the hpt36x bus + * @ap: ATA port + * @speed: transfer mode + * + * Return the 32bit register programming information for this channel + * that matches the speed provided. + */ + +static u32 hpt36x_find_mode(struct ata_port *ap, int speed) +{ + struct hpt_clock *clocks = ap->host->private_data; + + while(clocks->xfer_speed) { + if (clocks->xfer_speed == speed) + return clocks->timing; + clocks++; + } + BUG(); + return 0xffffffffU; /* silence compiler warning */ +} + +static int hpt36x_pre_reset(struct ata_port *ap) +{ + u8 ata66; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + pci_read_config_byte(pdev, 0x5A, &ata66); + if (ata66 & (1 << ap->port_no)) + ap->cbl = ATA_CBL_PATA40; + else + ap->cbl = ATA_CBL_PATA80; + return ata_std_prereset(ap); +} + +/** + * hpt36x_error_handler - reset the hpt36x bus + * @ap: ATA port to reset + * + * Perform the reset handling for the 366/368 + */ + +static void hpt36x_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, hpt36x_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * hpt366_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Perform PIO mode setup. + */ + +static void hpt366_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 addr1, addr2; + u32 reg; + u32 mode; + u8 fast; + + addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); + addr2 = 0x51 + 4 * ap->port_no; + + /* Fast interrupt prediction disable, hold off interrupt disable */ + pci_read_config_byte(pdev, addr2, &fast); + if (fast & 0x80) { + fast &= ~0x80; + pci_write_config_byte(pdev, addr2, fast); + } + + pci_read_config_dword(pdev, addr1, ®); + mode = hpt36x_find_mode(ap, adev->pio_mode); + mode &= ~0x8000000; /* No FIFO in PIO */ + mode &= ~0x30070000; /* Leave config bits alone */ + reg &= 0x30070000; /* Strip timing bits */ + pci_write_config_dword(pdev, addr1, reg | mode); +} + +/** + * hpt366_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + * Set up the channel for MWDMA or UDMA modes. Much the same as with + * PIO, load the mode number and then set MWDMA or UDMA flag. + */ + +static void hpt366_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 addr1, addr2; + u32 reg; + u32 mode; + u8 fast; + + addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); + addr2 = 0x51 + 4 * ap->port_no; + + /* Fast interrupt prediction disable, hold off interrupt disable */ + pci_read_config_byte(pdev, addr2, &fast); + if (fast & 0x80) { + fast &= ~0x80; + pci_write_config_byte(pdev, addr2, fast); + } + + pci_read_config_dword(pdev, addr1, ®); + mode = hpt36x_find_mode(ap, adev->dma_mode); + mode |= 0x8000000; /* FIFO in MWDMA or UDMA */ + mode &= ~0xC0000000; /* Leave config bits alone */ + reg &= 0xC0000000; /* Strip timing bits */ + pci_write_config_dword(pdev, addr1, reg | mode); +} + +static struct scsi_host_template hpt36x_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +/* + * Configuration for HPT366/68 + */ + +static struct ata_port_operations hpt366_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = hpt366_set_piomode, + .set_dmamode = hpt366_set_dmamode, + .mode_filter = hpt366_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = hpt36x_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * hpt36x_init_one - Initialise an HPT366/368 + * @dev: PCI device + * @id: Entry in match table + * + * Initialise an HPT36x device. There are some interesting complications + * here. Firstly the chip may report 366 and be one of several variants. + * Secondly all the timings depend on the clock for the chip which we must + * detect and look up + * + * This is the known chip mappings. It may be missing a couple of later + * releases. + * + * Chip version PCI Rev Notes + * HPT366 4 (HPT366) 0 UDMA66 + * HPT366 4 (HPT366) 1 UDMA66 + * HPT368 4 (HPT366) 2 UDMA66 + * HPT37x/30x 4 (HPT366) 3+ Other driver + * + */ + +static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info_hpt366 = { + .sht = &hpt36x_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x1f, + .port_ops = &hpt366_port_ops + }; + struct ata_port_info *port_info[2] = {&info_hpt366, &info_hpt366}; + + u32 class_rev; + u32 reg1; + u8 drive_fast; + + pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); + class_rev &= 0xFF; + + /* May be a later chip in disguise. Check */ + /* Newer chips are not in the HPT36x driver. Ignore them */ + if (class_rev > 2) + return -ENODEV; + + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4)); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78); + pci_write_config_byte(dev, PCI_MIN_GNT, 0x08); + pci_write_config_byte(dev, PCI_MAX_LAT, 0x08); + + pci_read_config_byte(dev, 0x51, &drive_fast); + if (drive_fast & 0x80) + pci_write_config_byte(dev, 0x51, drive_fast & ~0x80); + + pci_read_config_dword(dev, 0x40, ®1); + + /* PCI clocking determines the ATA timing values to use */ + /* info_hpt366 is safe against re-entry so we can scribble on it */ + switch(reg1 & 0x700) { + case 5: + info_hpt366.private_data = &hpt366_40; + break; + case 9: + info_hpt366.private_data = &hpt366_25; + break; + default: + info_hpt366.private_data = &hpt366_33; + break; + } + /* Now kick off ATA set up */ + return ata_pci_init_one(dev, port_info, 2); +} + +static struct pci_device_id hpt36x[] = { + { PCI_DEVICE(PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT366), }, + { 0, }, +}; + +static struct pci_driver hpt36x_pci_driver = { + .name = DRV_NAME, + .id_table = hpt36x, + .probe = hpt36x_init_one, + .remove = ata_pci_remove_one +}; + +static int __init hpt36x_init(void) +{ + return pci_register_driver(&hpt36x_pci_driver); +} + + +static void __exit hpt36x_exit(void) +{ + pci_unregister_driver(&hpt36x_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for the Highpoint HPT366/368"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, hpt36x); +MODULE_VERSION(DRV_VERSION); + +module_init(hpt36x_init); +module_exit(hpt36x_exit); diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c new file mode 100644 index 00000000000..7c3da53f1e0 --- /dev/null +++ b/drivers/ata/pata_hpt37x.c @@ -0,0 +1,1257 @@ +/* + * Libata driver for the highpoint 37x and 30x UDMA66 ATA controllers. + * + * This driver is heavily based upon: + * + * linux/drivers/ide/pci/hpt366.c Version 0.36 April 25, 2003 + * + * Copyright (C) 1999-2003 Andre Hedrick + * Portions Copyright (C) 2001 Sun Microsystems, Inc. + * Portions Copyright (C) 2003 Red Hat Inc + * + * TODO + * PLL mode + * Look into engine reset on timeout errors. Should not be + * required. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_hpt37x" +#define DRV_VERSION "0.5" + +struct hpt_clock { + u8 xfer_speed; + u32 timing; +}; + +struct hpt_chip { + const char *name; + unsigned int base; + struct hpt_clock const *clocks[4]; +}; + +/* key for bus clock timings + * bit + * 0:3 data_high_time. inactive time of DIOW_/DIOR_ for PIO and MW + * DMA. cycles = value + 1 + * 4:8 data_low_time. active time of DIOW_/DIOR_ for PIO and MW + * DMA. cycles = value + 1 + * 9:12 cmd_high_time. inactive time of DIOW_/DIOR_ during task file + * register access. + * 13:17 cmd_low_time. active time of DIOW_/DIOR_ during task file + * register access. + * 18:21 udma_cycle_time. clock freq and clock cycles for UDMA xfer. + * during task file register access. + * 22:24 pre_high_time. time to initialize 1st cycle for PIO and MW DMA + * xfer. + * 25:27 cmd_pre_high_time. time to initialize 1st PIO cycle for task + * register access. + * 28 UDMA enable + * 29 DMA enable + * 30 PIO_MST enable. if set, the chip is in bus master mode during + * PIO. + * 31 FIFO enable. + */ + +/* from highpoint documentation. these are old values */ +static const struct hpt_clock hpt370_timings_33[] = { +/* { XFER_UDMA_5, 0x1A85F442, 0x16454e31 }, */ + { XFER_UDMA_5, 0x16454e31 }, + { XFER_UDMA_4, 0x16454e31 }, + { XFER_UDMA_3, 0x166d4e31 }, + { XFER_UDMA_2, 0x16494e31 }, + { XFER_UDMA_1, 0x164d4e31 }, + { XFER_UDMA_0, 0x16514e31 }, + + { XFER_MW_DMA_2, 0x26514e21 }, + { XFER_MW_DMA_1, 0x26514e33 }, + { XFER_MW_DMA_0, 0x26514e97 }, + + { XFER_PIO_4, 0x06514e21 }, + { XFER_PIO_3, 0x06514e22 }, + { XFER_PIO_2, 0x06514e33 }, + { XFER_PIO_1, 0x06914e43 }, + { XFER_PIO_0, 0x06914e57 }, + { 0, 0x06514e57 } +}; + +static const struct hpt_clock hpt370_timings_66[] = { + { XFER_UDMA_5, 0x14846231 }, + { XFER_UDMA_4, 0x14886231 }, + { XFER_UDMA_3, 0x148c6231 }, + { XFER_UDMA_2, 0x148c6231 }, + { XFER_UDMA_1, 0x14906231 }, + { XFER_UDMA_0, 0x14986231 }, + + { XFER_MW_DMA_2, 0x26514e21 }, + { XFER_MW_DMA_1, 0x26514e33 }, + { XFER_MW_DMA_0, 0x26514e97 }, + + { XFER_PIO_4, 0x06514e21 }, + { XFER_PIO_3, 0x06514e22 }, + { XFER_PIO_2, 0x06514e33 }, + { XFER_PIO_1, 0x06914e43 }, + { XFER_PIO_0, 0x06914e57 }, + { 0, 0x06514e57 } +}; + +/* these are the current (4 sep 2001) timings from highpoint */ +static const struct hpt_clock hpt370a_timings_33[] = { + { XFER_UDMA_5, 0x12446231 }, + { XFER_UDMA_4, 0x12446231 }, + { XFER_UDMA_3, 0x126c6231 }, + { XFER_UDMA_2, 0x12486231 }, + { XFER_UDMA_1, 0x124c6233 }, + { XFER_UDMA_0, 0x12506297 }, + + { XFER_MW_DMA_2, 0x22406c31 }, + { XFER_MW_DMA_1, 0x22406c33 }, + { XFER_MW_DMA_0, 0x22406c97 }, + + { XFER_PIO_4, 0x06414e31 }, + { XFER_PIO_3, 0x06414e42 }, + { XFER_PIO_2, 0x06414e53 }, + { XFER_PIO_1, 0x06814e93 }, + { XFER_PIO_0, 0x06814ea7 }, + { 0, 0x06814ea7 } +}; + +/* 2x 33MHz timings */ +static const struct hpt_clock hpt370a_timings_66[] = { + { XFER_UDMA_5, 0x1488e673 }, + { XFER_UDMA_4, 0x1488e673 }, + { XFER_UDMA_3, 0x1498e673 }, + { XFER_UDMA_2, 0x1490e673 }, + { XFER_UDMA_1, 0x1498e677 }, + { XFER_UDMA_0, 0x14a0e73f }, + + { XFER_MW_DMA_2, 0x2480fa73 }, + { XFER_MW_DMA_1, 0x2480fa77 }, + { XFER_MW_DMA_0, 0x2480fb3f }, + + { XFER_PIO_4, 0x0c82be73 }, + { XFER_PIO_3, 0x0c82be95 }, + { XFER_PIO_2, 0x0c82beb7 }, + { XFER_PIO_1, 0x0d02bf37 }, + { XFER_PIO_0, 0x0d02bf5f }, + { 0, 0x0d02bf5f } +}; + +static const struct hpt_clock hpt370a_timings_50[] = { + { XFER_UDMA_5, 0x12848242 }, + { XFER_UDMA_4, 0x12ac8242 }, + { XFER_UDMA_3, 0x128c8242 }, + { XFER_UDMA_2, 0x120c8242 }, + { XFER_UDMA_1, 0x12148254 }, + { XFER_UDMA_0, 0x121882ea }, + + { XFER_MW_DMA_2, 0x22808242 }, + { XFER_MW_DMA_1, 0x22808254 }, + { XFER_MW_DMA_0, 0x228082ea }, + + { XFER_PIO_4, 0x0a81f442 }, + { XFER_PIO_3, 0x0a81f443 }, + { XFER_PIO_2, 0x0a81f454 }, + { XFER_PIO_1, 0x0ac1f465 }, + { XFER_PIO_0, 0x0ac1f48a }, + { 0, 0x0ac1f48a } +}; + +static const struct hpt_clock hpt372_timings_33[] = { + { XFER_UDMA_6, 0x1c81dc62 }, + { XFER_UDMA_5, 0x1c6ddc62 }, + { XFER_UDMA_4, 0x1c8ddc62 }, + { XFER_UDMA_3, 0x1c8edc62 }, /* checkme */ + { XFER_UDMA_2, 0x1c91dc62 }, + { XFER_UDMA_1, 0x1c9adc62 }, /* checkme */ + { XFER_UDMA_0, 0x1c82dc62 }, /* checkme */ + + { XFER_MW_DMA_2, 0x2c829262 }, + { XFER_MW_DMA_1, 0x2c829266 }, /* checkme */ + { XFER_MW_DMA_0, 0x2c82922e }, /* checkme */ + + { XFER_PIO_4, 0x0c829c62 }, + { XFER_PIO_3, 0x0c829c84 }, + { XFER_PIO_2, 0x0c829ca6 }, + { XFER_PIO_1, 0x0d029d26 }, + { XFER_PIO_0, 0x0d029d5e }, + { 0, 0x0d029d5e } +}; + +static const struct hpt_clock hpt372_timings_50[] = { + { XFER_UDMA_5, 0x12848242 }, + { XFER_UDMA_4, 0x12ac8242 }, + { XFER_UDMA_3, 0x128c8242 }, + { XFER_UDMA_2, 0x120c8242 }, + { XFER_UDMA_1, 0x12148254 }, + { XFER_UDMA_0, 0x121882ea }, + + { XFER_MW_DMA_2, 0x22808242 }, + { XFER_MW_DMA_1, 0x22808254 }, + { XFER_MW_DMA_0, 0x228082ea }, + + { XFER_PIO_4, 0x0a81f442 }, + { XFER_PIO_3, 0x0a81f443 }, + { XFER_PIO_2, 0x0a81f454 }, + { XFER_PIO_1, 0x0ac1f465 }, + { XFER_PIO_0, 0x0ac1f48a }, + { 0, 0x0a81f443 } +}; + +static const struct hpt_clock hpt372_timings_66[] = { + { XFER_UDMA_6, 0x1c869c62 }, + { XFER_UDMA_5, 0x1cae9c62 }, + { XFER_UDMA_4, 0x1c8a9c62 }, + { XFER_UDMA_3, 0x1c8e9c62 }, + { XFER_UDMA_2, 0x1c929c62 }, + { XFER_UDMA_1, 0x1c9a9c62 }, + { XFER_UDMA_0, 0x1c829c62 }, + + { XFER_MW_DMA_2, 0x2c829c62 }, + { XFER_MW_DMA_1, 0x2c829c66 }, + { XFER_MW_DMA_0, 0x2c829d2e }, + + { XFER_PIO_4, 0x0c829c62 }, + { XFER_PIO_3, 0x0c829c84 }, + { XFER_PIO_2, 0x0c829ca6 }, + { XFER_PIO_1, 0x0d029d26 }, + { XFER_PIO_0, 0x0d029d5e }, + { 0, 0x0d029d26 } +}; + +static const struct hpt_clock hpt374_timings_33[] = { + { XFER_UDMA_6, 0x12808242 }, + { XFER_UDMA_5, 0x12848242 }, + { XFER_UDMA_4, 0x12ac8242 }, + { XFER_UDMA_3, 0x128c8242 }, + { XFER_UDMA_2, 0x120c8242 }, + { XFER_UDMA_1, 0x12148254 }, + { XFER_UDMA_0, 0x121882ea }, + + { XFER_MW_DMA_2, 0x22808242 }, + { XFER_MW_DMA_1, 0x22808254 }, + { XFER_MW_DMA_0, 0x228082ea }, + + { XFER_PIO_4, 0x0a81f442 }, + { XFER_PIO_3, 0x0a81f443 }, + { XFER_PIO_2, 0x0a81f454 }, + { XFER_PIO_1, 0x0ac1f465 }, + { XFER_PIO_0, 0x0ac1f48a }, + { 0, 0x06814e93 } +}; + +static const struct hpt_chip hpt370 = { + "HPT370", + 48, + { + hpt370_timings_33, + NULL, + NULL, + hpt370_timings_66 + } +}; + +static const struct hpt_chip hpt370a = { + "HPT370A", + 48, + { + hpt370a_timings_33, + NULL, + hpt370a_timings_50, + hpt370a_timings_66 + } +}; + +static const struct hpt_chip hpt372 = { + "HPT372", + 55, + { + hpt372_timings_33, + NULL, + hpt372_timings_50, + hpt372_timings_66 + } +}; + +static const struct hpt_chip hpt302 = { + "HPT302", + 66, + { + hpt372_timings_33, + NULL, + hpt372_timings_50, + hpt372_timings_66 + } +}; + +static const struct hpt_chip hpt371 = { + "HPT371", + 66, + { + hpt372_timings_33, + NULL, + hpt372_timings_50, + hpt372_timings_66 + } +}; + +static const struct hpt_chip hpt372a = { + "HPT372A", + 66, + { + hpt372_timings_33, + NULL, + hpt372_timings_50, + hpt372_timings_66 + } +}; + +static const struct hpt_chip hpt374 = { + "HPT374", + 48, + { + hpt374_timings_33, + NULL, + NULL, + NULL + } +}; + +/** + * hpt37x_find_mode - reset the hpt37x bus + * @ap: ATA port + * @speed: transfer mode + * + * Return the 32bit register programming information for this channel + * that matches the speed provided. + */ + +static u32 hpt37x_find_mode(struct ata_port *ap, int speed) +{ + struct hpt_clock *clocks = ap->host->private_data; + + while(clocks->xfer_speed) { + if (clocks->xfer_speed == speed) + return clocks->timing; + clocks++; + } + BUG(); + return 0xffffffffU; /* silence compiler warning */ +} + +static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, const char *list[]) +{ + unsigned char model_num[40]; + char *s; + unsigned int len; + int i = 0; + + ata_id_string(dev->id, model_num, ATA_ID_PROD_OFS, + sizeof(model_num)); + s = &model_num[0]; + len = strnlen(s, sizeof(model_num)); + + /* ATAPI specifies that empty space is blank-filled; remove blanks */ + while ((len > 0) && (s[len - 1] == ' ')) { + len--; + s[len] = 0; + } + + while(list[i] != NULL) { + if (!strncmp(list[i], s, len)) { + printk(KERN_WARNING DRV_NAME ": %s is not supported for %s.\n", + modestr, list[i]); + return 1; + } + i++; + } + return 0; +} + +static const char *bad_ata33[] = { + "Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3", "Maxtor 90845U3", "Maxtor 90650U2", + "Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5", "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2", + "Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6", "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4", + "Maxtor 90510D4", + "Maxtor 90432D3", "Maxtor 90288D2", "Maxtor 90256D2", + "Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7", "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4", + "Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5", "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2", + NULL +}; + +static const char *bad_ata100_5[] = { + "IBM-DTLA-307075", + "IBM-DTLA-307060", + "IBM-DTLA-307045", + "IBM-DTLA-307030", + "IBM-DTLA-307020", + "IBM-DTLA-307015", + "IBM-DTLA-305040", + "IBM-DTLA-305030", + "IBM-DTLA-305020", + "IC35L010AVER07-0", + "IC35L020AVER07-0", + "IC35L030AVER07-0", + "IC35L040AVER07-0", + "IC35L060AVER07-0", + "WDC AC310200R", + NULL +}; + +/** + * hpt370_filter - mode selection filter + * @ap: ATA interface + * @adev: ATA device + * + * Block UDMA on devices that cause trouble with this controller. + */ + +static unsigned long hpt370_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask) +{ + if (adev->class != ATA_DEV_ATA) { + if (hpt_dma_blacklisted(adev, "UDMA", bad_ata33)) + mask &= ~ATA_MASK_UDMA; + if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5)) + mask &= ~(0x1F << ATA_SHIFT_UDMA); + } + return ata_pci_default_filter(ap, adev, mask); +} + +/** + * hpt370a_filter - mode selection filter + * @ap: ATA interface + * @adev: ATA device + * + * Block UDMA on devices that cause trouble with this controller. + */ + +static unsigned long hpt370a_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask) +{ + if (adev->class != ATA_DEV_ATA) { + if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5)) + mask &= ~ (0x1F << ATA_SHIFT_UDMA); + } + return ata_pci_default_filter(ap, adev, mask); +} + +/** + * hpt37x_pre_reset - reset the hpt37x bus + * @ap: ATA port to reset + * + * Perform the initial reset handling for the 370/372 and 374 func 0 + */ + +static int hpt37x_pre_reset(struct ata_port *ap) +{ + u8 scr2, ata66; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + pci_read_config_byte(pdev, 0x5B, &scr2); + pci_write_config_byte(pdev, 0x5B, scr2 & ~0x01); + /* Cable register now active */ + pci_read_config_byte(pdev, 0x5A, &ata66); + /* Restore state */ + pci_write_config_byte(pdev, 0x5B, scr2); + + if (ata66 & (1 << ap->port_no)) + ap->cbl = ATA_CBL_PATA40; + else + ap->cbl = ATA_CBL_PATA80; + + /* Reset the state machine */ + pci_write_config_byte(pdev, 0x50, 0x37); + pci_write_config_byte(pdev, 0x54, 0x37); + udelay(100); + + return ata_std_prereset(ap); +} + +/** + * hpt37x_error_handler - reset the hpt374 + * @ap: ATA port to reset + * + * Perform probe for HPT37x, except for HPT374 channel 2 + */ + +static void hpt37x_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, hpt37x_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +static int hpt374_pre_reset(struct ata_port *ap) +{ + u16 mcr3, mcr6; + u8 ata66; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + /* Do the extra channel work */ + pci_read_config_word(pdev, 0x52, &mcr3); + pci_read_config_word(pdev, 0x56, &mcr6); + /* Set bit 15 of 0x52 to enable TCBLID as input + Set bit 15 of 0x56 to enable FCBLID as input + */ + pci_write_config_word(pdev, 0x52, mcr3 | 0x8000); + pci_write_config_word(pdev, 0x56, mcr6 | 0x8000); + pci_read_config_byte(pdev, 0x5A, &ata66); + /* Reset TCBLID/FCBLID to output */ + pci_write_config_word(pdev, 0x52, mcr3); + pci_write_config_word(pdev, 0x56, mcr6); + + if (ata66 & (1 << ap->port_no)) + ap->cbl = ATA_CBL_PATA40; + else + ap->cbl = ATA_CBL_PATA80; + + /* Reset the state machine */ + pci_write_config_byte(pdev, 0x50, 0x37); + pci_write_config_byte(pdev, 0x54, 0x37); + udelay(100); + + return ata_std_prereset(ap); +} + +/** + * hpt374_error_handler - reset the hpt374 + * @classes: + * + * The 374 cable detect is a little different due to the extra + * channels. The function 0 channels work like usual but function 1 + * is special + */ + +static void hpt374_error_handler(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (!(PCI_FUNC(pdev->devfn) & 1)) + hpt37x_error_handler(ap); + else + ata_bmdma_drive_eh(ap, hpt374_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * hpt370_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Perform PIO mode setup. + */ + +static void hpt370_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 addr1, addr2; + u32 reg; + u32 mode; + u8 fast; + + addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); + addr2 = 0x51 + 4 * ap->port_no; + + /* Fast interrupt prediction disable, hold off interrupt disable */ + pci_read_config_byte(pdev, addr2, &fast); + fast &= ~0x02; + fast |= 0x01; + pci_write_config_byte(pdev, addr2, fast); + + pci_read_config_dword(pdev, addr1, ®); + mode = hpt37x_find_mode(ap, adev->pio_mode); + mode &= ~0x8000000; /* No FIFO in PIO */ + mode &= ~0x30070000; /* Leave config bits alone */ + reg &= 0x30070000; /* Strip timing bits */ + pci_write_config_dword(pdev, addr1, reg | mode); +} + +/** + * hpt370_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + * Set up the channel for MWDMA or UDMA modes. Much the same as with + * PIO, load the mode number and then set MWDMA or UDMA flag. + */ + +static void hpt370_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 addr1, addr2; + u32 reg; + u32 mode; + u8 fast; + + addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); + addr2 = 0x51 + 4 * ap->port_no; + + /* Fast interrupt prediction disable, hold off interrupt disable */ + pci_read_config_byte(pdev, addr2, &fast); + fast &= ~0x02; + fast |= 0x01; + pci_write_config_byte(pdev, addr2, fast); + + pci_read_config_dword(pdev, addr1, ®); + mode = hpt37x_find_mode(ap, adev->dma_mode); + mode |= 0x8000000; /* FIFO in MWDMA or UDMA */ + mode &= ~0xC0000000; /* Leave config bits alone */ + reg &= 0xC0000000; /* Strip timing bits */ + pci_write_config_dword(pdev, addr1, reg | mode); +} + +/** + * hpt370_bmdma_start - DMA engine begin + * @qc: ATA command + * + * The 370 and 370A want us to reset the DMA engine each time we + * use it. The 372 and later are fine. + */ + +static void hpt370_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); + udelay(10); + ata_bmdma_start(qc); +} + +/** + * hpt370_bmdma_end - DMA engine stop + * @qc: ATA command + * + * Work around the HPT370 DMA engine. + */ + +static void hpt370_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 dma_stat = inb(ap->ioaddr.bmdma_addr + 2); + u8 dma_cmd; + unsigned long bmdma = ap->ioaddr.bmdma_addr; + + if (dma_stat & 0x01) { + udelay(20); + dma_stat = inb(bmdma + 2); + } + if (dma_stat & 0x01) { + /* Clear the engine */ + pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); + udelay(10); + /* Stop DMA */ + dma_cmd = inb(bmdma ); + outb(dma_cmd & 0xFE, bmdma); + /* Clear Error */ + dma_stat = inb(bmdma + 2); + outb(dma_stat | 0x06 , bmdma + 2); + /* Clear the engine */ + pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); + udelay(10); + } + ata_bmdma_stop(qc); +} + +/** + * hpt372_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Perform PIO mode setup. + */ + +static void hpt372_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 addr1, addr2; + u32 reg; + u32 mode; + u8 fast; + + addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); + addr2 = 0x51 + 4 * ap->port_no; + + /* Fast interrupt prediction disable, hold off interrupt disable */ + pci_read_config_byte(pdev, addr2, &fast); + fast &= ~0x07; + pci_write_config_byte(pdev, addr2, fast); + + pci_read_config_dword(pdev, addr1, ®); + mode = hpt37x_find_mode(ap, adev->pio_mode); + + printk("Find mode for %d reports %X\n", adev->pio_mode, mode); + mode &= ~0x80000000; /* No FIFO in PIO */ + mode &= ~0x30070000; /* Leave config bits alone */ + reg &= 0x30070000; /* Strip timing bits */ + pci_write_config_dword(pdev, addr1, reg | mode); +} + +/** + * hpt372_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + * Set up the channel for MWDMA or UDMA modes. Much the same as with + * PIO, load the mode number and then set MWDMA or UDMA flag. + */ + +static void hpt372_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 addr1, addr2; + u32 reg; + u32 mode; + u8 fast; + + addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); + addr2 = 0x51 + 4 * ap->port_no; + + /* Fast interrupt prediction disable, hold off interrupt disable */ + pci_read_config_byte(pdev, addr2, &fast); + fast &= ~0x07; + pci_write_config_byte(pdev, addr2, fast); + + pci_read_config_dword(pdev, addr1, ®); + mode = hpt37x_find_mode(ap, adev->dma_mode); + printk("Find mode for DMA %d reports %X\n", adev->dma_mode, mode); + mode &= ~0xC0000000; /* Leave config bits alone */ + mode |= 0x80000000; /* FIFO in MWDMA or UDMA */ + reg &= 0xC0000000; /* Strip timing bits */ + pci_write_config_dword(pdev, addr1, reg | mode); +} + +/** + * hpt37x_bmdma_end - DMA engine stop + * @qc: ATA command + * + * Clean up after the HPT372 and later DMA engine + */ + +static void hpt37x_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int mscreg = 0x50 + 2 * ap->port_no; + u8 bwsr_stat, msc_stat; + + pci_read_config_byte(pdev, 0x6A, &bwsr_stat); + pci_read_config_byte(pdev, mscreg, &msc_stat); + if (bwsr_stat & (1 << ap->port_no)) + pci_write_config_byte(pdev, mscreg, msc_stat | 0x30); + ata_bmdma_stop(qc); +} + + +static struct scsi_host_template hpt37x_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +/* + * Configuration for HPT370 + */ + +static struct ata_port_operations hpt370_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = hpt370_set_piomode, + .set_dmamode = hpt370_set_dmamode, + .mode_filter = hpt370_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = hpt37x_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = hpt370_bmdma_start, + .bmdma_stop = hpt370_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Configuration for HPT370A. Close to 370 but less filters + */ + +static struct ata_port_operations hpt370a_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = hpt370_set_piomode, + .set_dmamode = hpt370_set_dmamode, + .mode_filter = hpt370a_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = hpt37x_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = hpt370_bmdma_start, + .bmdma_stop = hpt370_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Configuration for HPT372, HPT371, HPT302. Slightly different PIO + * and DMA mode setting functionality. + */ + +static struct ata_port_operations hpt372_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = hpt372_set_piomode, + .set_dmamode = hpt372_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = hpt37x_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = hpt37x_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Configuration for HPT374. Mode setting works like 372 and friends + * but we have a different cable detection procedure. + */ + +static struct ata_port_operations hpt374_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = hpt372_set_piomode, + .set_dmamode = hpt372_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = hpt374_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = hpt37x_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * htp37x_clock_slot - Turn timing to PC clock entry + * @freq: Reported frequency timing + * @base: Base timing + * + * Turn the timing data intoa clock slot (0 for 33, 1 for 40, 2 for 50 + * and 3 for 66Mhz) + */ + +static int hpt37x_clock_slot(unsigned int freq, unsigned int base) +{ + unsigned int f = (base * freq) / 192; /* Mhz */ + if (f < 40) + return 0; /* 33Mhz slot */ + if (f < 45) + return 1; /* 40Mhz slot */ + if (f < 55) + return 2; /* 50Mhz slot */ + return 3; /* 60Mhz slot */ +} + +/** + * hpt37x_calibrate_dpll - Calibrate the DPLL loop + * @dev: PCI device + * + * Perform a calibration cycle on the HPT37x DPLL. Returns 1 if this + * succeeds + */ + +static int hpt37x_calibrate_dpll(struct pci_dev *dev) +{ + u8 reg5b; + u32 reg5c; + int tries; + + for(tries = 0; tries < 0x5000; tries++) { + udelay(50); + pci_read_config_byte(dev, 0x5b, ®5b); + if (reg5b & 0x80) { + /* See if it stays set */ + for(tries = 0; tries < 0x1000; tries ++) { + pci_read_config_byte(dev, 0x5b, ®5b); + /* Failed ? */ + if ((reg5b & 0x80) == 0) + return 0; + } + /* Turn off tuning, we have the DPLL set */ + pci_read_config_dword(dev, 0x5c, ®5c); + pci_write_config_dword(dev, 0x5c, reg5c & ~ 0x100); + return 1; + } + } + /* Never went stable */ + return 0; +} +/** + * hpt37x_init_one - Initialise an HPT37X/302 + * @dev: PCI device + * @id: Entry in match table + * + * Initialise an HPT37x device. There are some interesting complications + * here. Firstly the chip may report 366 and be one of several variants. + * Secondly all the timings depend on the clock for the chip which we must + * detect and look up + * + * This is the known chip mappings. It may be missing a couple of later + * releases. + * + * Chip version PCI Rev Notes + * HPT366 4 (HPT366) 0 Other driver + * HPT366 4 (HPT366) 1 Other driver + * HPT368 4 (HPT366) 2 Other driver + * HPT370 4 (HPT366) 3 UDMA100 + * HPT370A 4 (HPT366) 4 UDMA100 + * HPT372 4 (HPT366) 5 UDMA133 (1) + * HPT372N 4 (HPT366) 6 Other driver + * HPT372A 5 (HPT372) 1 UDMA133 (1) + * HPT372N 5 (HPT372) 2 Other driver + * HPT302 6 (HPT302) 1 UDMA133 + * HPT302N 6 (HPT302) 2 Other driver + * HPT371 7 (HPT371) * UDMA133 + * HPT374 8 (HPT374) * UDMA133 4 channel + * HPT372N 9 (HPT372N) * Other driver + * + * (1) UDMA133 support depends on the bus clock + */ + +static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + /* HPT370 - UDMA100 */ + static struct ata_port_info info_hpt370 = { + .sht = &hpt37x_sht, + .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, + .port_ops = &hpt370_port_ops + }; + /* HPT370A - UDMA100 */ + static struct ata_port_info info_hpt370a = { + .sht = &hpt37x_sht, + .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, + .port_ops = &hpt370a_port_ops + }; + /* HPT371, 372 and friends - UDMA133 */ + static struct ata_port_info info_hpt372 = { + .sht = &hpt37x_sht, + .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, + .port_ops = &hpt372_port_ops + }; + /* HPT371, 372 and friends - UDMA100 at 50MHz clock */ + static struct ata_port_info info_hpt372_50 = { + .sht = &hpt37x_sht, + .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, + .port_ops = &hpt372_port_ops + }; + /* HPT374 - UDMA133 */ + static struct ata_port_info info_hpt374 = { + .sht = &hpt37x_sht, + .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, + .port_ops = &hpt374_port_ops + }; + + static const int MHz[4] = { 33, 40, 50, 66 }; + + struct ata_port_info *port_info[2]; + struct ata_port_info *port; + + u8 irqmask; + u32 class_rev; + u32 freq; + + const struct hpt_chip *chip_table; + int clock_slot; + + pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); + class_rev &= 0xFF; + + if (dev->device == PCI_DEVICE_ID_TTI_HPT366) { + /* May be a later chip in disguise. Check */ + /* Older chips are in the HPT366 driver. Ignore them */ + if (class_rev < 3) + return -ENODEV; + /* N series chips have their own driver. Ignore */ + if (class_rev == 6) + return -ENODEV; + + switch(class_rev) { + case 3: + port = &info_hpt370; + chip_table = &hpt370; + break; + case 4: + port = &info_hpt370a; + chip_table = &hpt370a; + break; + case 5: + port = &info_hpt372; + chip_table = &hpt372; + break; + default: + printk(KERN_ERR "pata_hpt37x: Unknown HPT366 subtype please report (%d).\n", class_rev); + return -ENODEV; + } + } else { + switch(dev->device) { + case PCI_DEVICE_ID_TTI_HPT372: + /* 372N if rev >= 2*/ + if (class_rev >= 2) + return -ENODEV; + port = &info_hpt372; + chip_table = &hpt372a; + break; + case PCI_DEVICE_ID_TTI_HPT302: + /* 302N if rev > 1 */ + if (class_rev > 1) + return -ENODEV; + port = &info_hpt372; + /* Check this */ + chip_table = &hpt302; + break; + case PCI_DEVICE_ID_TTI_HPT371: + port = &info_hpt372; + chip_table = &hpt371; + break; + case PCI_DEVICE_ID_TTI_HPT374: + chip_table = &hpt374; + port = &info_hpt374; + break; + default: + printk(KERN_ERR "pata_hpt37x: PCI table is bogus please report (%d).\n", dev->device); + return -ENODEV; + } + } + /* Ok so this is a chip we support */ + + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4)); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78); + pci_write_config_byte(dev, PCI_MIN_GNT, 0x08); + pci_write_config_byte(dev, PCI_MAX_LAT, 0x08); + + pci_read_config_byte(dev, 0x5A, &irqmask); + irqmask &= ~0x10; + pci_write_config_byte(dev, 0x5a, irqmask); + + /* + * default to pci clock. make sure MA15/16 are set to output + * to prevent drives having problems with 40-pin cables. Needed + * for some drives such as IBM-DTLA which will not enter ready + * state on reset when PDIAG is a input. + */ + + pci_write_config_byte(dev, 0x5b, 0x23); + + pci_read_config_dword(dev, 0x70, &freq); + if ((freq >> 12) != 0xABCDE) { + int i; + u8 sr; + u32 total = 0; + + printk(KERN_WARNING "pata_hpt37x: BIOS has not set timing clocks.\n"); + + /* This is the process the HPT371 BIOS is reported to use */ + for(i = 0; i < 128; i++) { + pci_read_config_byte(dev, 0x78, &sr); + total += sr; + udelay(15); + } + freq = total / 128; + } + freq &= 0x1FF; + + /* + * Turn the frequency check into a band and then find a timing + * table to match it. + */ + + clock_slot = hpt37x_clock_slot(freq, chip_table->base); + if (chip_table->clocks[clock_slot] == NULL) { + /* + * We need to try PLL mode instead + */ + unsigned int f_low = (MHz[clock_slot] * chip_table->base) / 192; + unsigned int f_high = f_low + 2; + int adjust; + + for(adjust = 0; adjust < 8; adjust++) { + if (hpt37x_calibrate_dpll(dev)) + break; + /* See if it'll settle at a fractionally different clock */ + if ((adjust & 3) == 3) { + f_low --; + f_high ++; + } + pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low); + } + if (adjust == 8) { + printk(KERN_WARNING "hpt37x: DPLL did not stabilize.\n"); + return -ENODEV; + } + /* Check if this works for all cases */ + port->private_data = (void *)hpt370_timings_66; + + printk(KERN_INFO "hpt37x: Bus clock %dMHz, using DPLL.\n", MHz[clock_slot]); + } else { + port->private_data = (void *)chip_table->clocks[clock_slot]; + /* + * Perform a final fixup. The 371 and 372 clock determines + * if UDMA133 is available. + */ + + if (clock_slot == 2 && chip_table == &hpt372) { /* 50Mhz */ + printk(KERN_WARNING "pata_hpt37x: No UDMA133 support available with 50MHz bus clock.\n"); + if (port == &info_hpt372) + port = &info_hpt372_50; + else BUG(); + } + printk(KERN_INFO "hpt37x: %s: Bus clock %dMHz.\n", chip_table->name, MHz[clock_slot]); + } + port_info[0] = port_info[1] = port; + /* Now kick off ATA set up */ + return ata_pci_init_one(dev, port_info, 2); +} + +static struct pci_device_id hpt37x[] = { + { PCI_DEVICE(PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT366), }, + { PCI_DEVICE(PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT371), }, + { PCI_DEVICE(PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT372), }, + { PCI_DEVICE(PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT374), }, + { PCI_DEVICE(PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT302), }, + { 0, }, +}; + +static struct pci_driver hpt37x_pci_driver = { + .name = DRV_NAME, + .id_table = hpt37x, + .probe = hpt37x_init_one, + .remove = ata_pci_remove_one +}; + +static int __init hpt37x_init(void) +{ + return pci_register_driver(&hpt37x_pci_driver); +} + + +static void __exit hpt37x_exit(void) +{ + pci_unregister_driver(&hpt37x_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for the Highpoint HPT37x/30x"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, hpt37x); +MODULE_VERSION(DRV_VERSION); + +module_init(hpt37x_init); +module_exit(hpt37x_exit); diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c new file mode 100644 index 00000000000..40fcda62c7a --- /dev/null +++ b/drivers/ata/pata_hpt3x2n.c @@ -0,0 +1,597 @@ +/* + * Libata driver for the highpoint 372N and 302N UDMA66 ATA controllers. + * + * This driver is heavily based upon: + * + * linux/drivers/ide/pci/hpt366.c Version 0.36 April 25, 2003 + * + * Copyright (C) 1999-2003 Andre Hedrick + * Portions Copyright (C) 2001 Sun Microsystems, Inc. + * Portions Copyright (C) 2003 Red Hat Inc + * + * + * TODO + * 371N + * Work out best PLL policy + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_hpt3x2n" +#define DRV_VERSION "0.3" + +enum { + HPT_PCI_FAST = (1 << 31), + PCI66 = (1 << 1), + USE_DPLL = (1 << 0) +}; + +struct hpt_clock { + u8 xfer_speed; + u32 timing; +}; + +struct hpt_chip { + const char *name; + struct hpt_clock *clocks[3]; +}; + +/* key for bus clock timings + * bit + * 0:3 data_high_time. inactive time of DIOW_/DIOR_ for PIO and MW + * DMA. cycles = value + 1 + * 4:8 data_low_time. active time of DIOW_/DIOR_ for PIO and MW + * DMA. cycles = value + 1 + * 9:12 cmd_high_time. inactive time of DIOW_/DIOR_ during task file + * register access. + * 13:17 cmd_low_time. active time of DIOW_/DIOR_ during task file + * register access. + * 18:21 udma_cycle_time. clock freq and clock cycles for UDMA xfer. + * during task file register access. + * 22:24 pre_high_time. time to initialize 1st cycle for PIO and MW DMA + * xfer. + * 25:27 cmd_pre_high_time. time to initialize 1st PIO cycle for task + * register access. + * 28 UDMA enable + * 29 DMA enable + * 30 PIO_MST enable. if set, the chip is in bus master mode during + * PIO. + * 31 FIFO enable. + */ + +/* 66MHz DPLL clocks */ + +static struct hpt_clock hpt3x2n_clocks[] = { + { XFER_UDMA_7, 0x1c869c62 }, + { XFER_UDMA_6, 0x1c869c62 }, + { XFER_UDMA_5, 0x1c8a9c62 }, + { XFER_UDMA_4, 0x1c8a9c62 }, + { XFER_UDMA_3, 0x1c8e9c62 }, + { XFER_UDMA_2, 0x1c929c62 }, + { XFER_UDMA_1, 0x1c9a9c62 }, + { XFER_UDMA_0, 0x1c829c62 }, + + { XFER_MW_DMA_2, 0x2c829c62 }, + { XFER_MW_DMA_1, 0x2c829c66 }, + { XFER_MW_DMA_0, 0x2c829d2c }, + + { XFER_PIO_4, 0x0c829c62 }, + { XFER_PIO_3, 0x0c829c84 }, + { XFER_PIO_2, 0x0c829ca6 }, + { XFER_PIO_1, 0x0d029d26 }, + { XFER_PIO_0, 0x0d029d5e }, + { 0, 0x0d029d5e } +}; + +/** + * hpt3x2n_find_mode - reset the hpt3x2n bus + * @ap: ATA port + * @speed: transfer mode + * + * Return the 32bit register programming information for this channel + * that matches the speed provided. For the moment the clocks table + * is hard coded but easy to change. This will be needed if we use + * different DPLLs + */ + +static u32 hpt3x2n_find_mode(struct ata_port *ap, int speed) +{ + struct hpt_clock *clocks = hpt3x2n_clocks; + + while(clocks->xfer_speed) { + if (clocks->xfer_speed == speed) + return clocks->timing; + clocks++; + } + BUG(); + return 0xffffffffU; /* silence compiler warning */ +} + +/** + * hpt3x2n_pre_reset - reset the hpt3x2n bus + * @ap: ATA port to reset + * + * Perform the initial reset handling for the 3x2n series controllers. + * Reset the hardware and state machine, obtain the cable type. + */ + +static int hpt3xn_pre_reset(struct ata_port *ap) +{ + u8 scr2, ata66; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + pci_read_config_byte(pdev, 0x5B, &scr2); + pci_write_config_byte(pdev, 0x5B, scr2 & ~0x01); + /* Cable register now active */ + pci_read_config_byte(pdev, 0x5A, &ata66); + /* Restore state */ + pci_write_config_byte(pdev, 0x5B, scr2); + + if (ata66 & (1 << ap->port_no)) + ap->cbl = ATA_CBL_PATA40; + else + ap->cbl = ATA_CBL_PATA80; + + /* Reset the state machine */ + pci_write_config_byte(pdev, 0x50, 0x37); + pci_write_config_byte(pdev, 0x54, 0x37); + udelay(100); + + return ata_std_prereset(ap); +} + +/** + * hpt3x2n_error_handler - probe the hpt3x2n bus + * @ap: ATA port to reset + * + * Perform the probe reset handling for the 3x2N + */ + +static void hpt3x2n_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, hpt3xn_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * hpt3x2n_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Perform PIO mode setup. + */ + +static void hpt3x2n_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 addr1, addr2; + u32 reg; + u32 mode; + u8 fast; + + addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); + addr2 = 0x51 + 4 * ap->port_no; + + /* Fast interrupt prediction disable, hold off interrupt disable */ + pci_read_config_byte(pdev, addr2, &fast); + fast &= ~0x07; + pci_write_config_byte(pdev, addr2, fast); + + pci_read_config_dword(pdev, addr1, ®); + mode = hpt3x2n_find_mode(ap, adev->pio_mode); + mode &= ~0x8000000; /* No FIFO in PIO */ + mode &= ~0x30070000; /* Leave config bits alone */ + reg &= 0x30070000; /* Strip timing bits */ + pci_write_config_dword(pdev, addr1, reg | mode); +} + +/** + * hpt3x2n_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + * Set up the channel for MWDMA or UDMA modes. Much the same as with + * PIO, load the mode number and then set MWDMA or UDMA flag. + */ + +static void hpt3x2n_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 addr1, addr2; + u32 reg; + u32 mode; + u8 fast; + + addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); + addr2 = 0x51 + 4 * ap->port_no; + + /* Fast interrupt prediction disable, hold off interrupt disable */ + pci_read_config_byte(pdev, addr2, &fast); + fast &= ~0x07; + pci_write_config_byte(pdev, addr2, fast); + + pci_read_config_dword(pdev, addr1, ®); + mode = hpt3x2n_find_mode(ap, adev->dma_mode); + mode |= 0x8000000; /* FIFO in MWDMA or UDMA */ + mode &= ~0xC0000000; /* Leave config bits alone */ + reg &= 0xC0000000; /* Strip timing bits */ + pci_write_config_dword(pdev, addr1, reg | mode); +} + +/** + * hpt3x2n_bmdma_end - DMA engine stop + * @qc: ATA command + * + * Clean up after the HPT3x2n and later DMA engine + */ + +static void hpt3x2n_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int mscreg = 0x50 + 2 * ap->port_no; + u8 bwsr_stat, msc_stat; + + pci_read_config_byte(pdev, 0x6A, &bwsr_stat); + pci_read_config_byte(pdev, mscreg, &msc_stat); + if (bwsr_stat & (1 << ap->port_no)) + pci_write_config_byte(pdev, mscreg, msc_stat | 0x30); + ata_bmdma_stop(qc); +} + +/** + * hpt3x2n_set_clock - clock control + * @ap: ATA port + * @source: 0x21 or 0x23 for PLL or PCI sourced clock + * + * Switch the ATA bus clock between the PLL and PCI clock sources + * while correctly isolating the bus and resetting internal logic + * + * We must use the DPLL for + * - writing + * - second channel UDMA7 (SATA ports) or higher + * - 66MHz PCI + * + * or we will underclock the device and get reduced performance. + */ + +static void hpt3x2n_set_clock(struct ata_port *ap, int source) +{ + unsigned long bmdma = ap->ioaddr.bmdma_addr; + + /* Tristate the bus */ + outb(0x80, bmdma+0x73); + outb(0x80, bmdma+0x77); + + /* Switch clock and reset channels */ + outb(source, bmdma+0x7B); + outb(0xC0, bmdma+0x79); + + /* Reset state machines */ + outb(0x37, bmdma+0x70); + outb(0x37, bmdma+0x74); + + /* Complete reset */ + outb(0x00, bmdma+0x79); + + /* Reconnect channels to bus */ + outb(0x00, bmdma+0x73); + outb(0x00, bmdma+0x77); +} + +/* Check if our partner interface is busy */ + +static int hpt3x2n_pair_idle(struct ata_port *ap) +{ + struct ata_host *host = ap->host; + struct ata_port *pair = host->ports[ap->port_no ^ 1]; + + if (pair->hsm_task_state == HSM_ST_IDLE) + return 1; + return 0; +} + +static int hpt3x2n_use_dpll(struct ata_port *ap, int reading) +{ + long flags = (long)ap->host->private_data; + /* See if we should use the DPLL */ + if (reading == 0) + return USE_DPLL; /* Needed for write */ + if (flags & PCI66) + return USE_DPLL; /* Needed at 66Mhz */ + return 0; +} + +static unsigned int hpt3x2n_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_taskfile *tf = &qc->tf; + struct ata_port *ap = qc->ap; + int flags = (long)ap->host->private_data; + + if (hpt3x2n_pair_idle(ap)) { + int dpll = hpt3x2n_use_dpll(ap, (tf->flags & ATA_TFLAG_WRITE)); + if ((flags & USE_DPLL) != dpll) { + if (dpll == 1) + hpt3x2n_set_clock(ap, 0x21); + else + hpt3x2n_set_clock(ap, 0x23); + } + } + return ata_qc_issue_prot(qc); +} + +static struct scsi_host_template hpt3x2n_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +/* + * Configuration for HPT3x2n. + */ + +static struct ata_port_operations hpt3x2n_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = hpt3x2n_set_piomode, + .set_dmamode = hpt3x2n_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = hpt3x2n_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = hpt3x2n_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = hpt3x2n_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * hpt3xn_calibrate_dpll - Calibrate the DPLL loop + * @dev: PCI device + * + * Perform a calibration cycle on the HPT3xN DPLL. Returns 1 if this + * succeeds + */ + +static int hpt3xn_calibrate_dpll(struct pci_dev *dev) +{ + u8 reg5b; + u32 reg5c; + int tries; + + for(tries = 0; tries < 0x5000; tries++) { + udelay(50); + pci_read_config_byte(dev, 0x5b, ®5b); + if (reg5b & 0x80) { + /* See if it stays set */ + for(tries = 0; tries < 0x1000; tries ++) { + pci_read_config_byte(dev, 0x5b, ®5b); + /* Failed ? */ + if ((reg5b & 0x80) == 0) + return 0; + } + /* Turn off tuning, we have the DPLL set */ + pci_read_config_dword(dev, 0x5c, ®5c); + pci_write_config_dword(dev, 0x5c, reg5c & ~ 0x100); + return 1; + } + } + /* Never went stable */ + return 0; +} + +static int hpt3x2n_pci_clock(struct pci_dev *pdev) +{ + unsigned long freq; + u32 fcnt; + + pci_read_config_dword(pdev, 0x70/*CHECKME*/, &fcnt); + if ((fcnt >> 12) != 0xABCDE) { + printk(KERN_WARNING "hpt3xn: BIOS clock data not set.\n"); + return 33; /* Not BIOS set */ + } + fcnt &= 0x1FF; + + freq = (fcnt * 77) / 192; + + /* Clamp to bands */ + if (freq < 40) + return 33; + if (freq < 45) + return 40; + if (freq < 55) + return 50; + return 66; +} + +/** + * hpt3x2n_init_one - Initialise an HPT37X/302 + * @dev: PCI device + * @id: Entry in match table + * + * Initialise an HPT3x2n device. There are some interesting complications + * here. Firstly the chip may report 366 and be one of several variants. + * Secondly all the timings depend on the clock for the chip which we must + * detect and look up + * + * This is the known chip mappings. It may be missing a couple of later + * releases. + * + * Chip version PCI Rev Notes + * HPT372 4 (HPT366) 5 Other driver + * HPT372N 4 (HPT366) 6 UDMA133 + * HPT372 5 (HPT372) 1 Other driver + * HPT372N 5 (HPT372) 2 UDMA133 + * HPT302 6 (HPT302) * Other driver + * HPT302N 6 (HPT302) > 1 UDMA133 + * HPT371 7 (HPT371) * Other driver + * HPT371N 7 (HPT371) > 1 UDMA133 + * HPT374 8 (HPT374) * Other driver + * HPT372N 9 (HPT372N) * UDMA133 + * + * (1) UDMA133 support depends on the bus clock + * + * To pin down HPT371N + */ + +static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + /* HPT372N and friends - UDMA133 */ + static struct ata_port_info info = { + .sht = &hpt3x2n_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, + .port_ops = &hpt3x2n_port_ops + }; + struct ata_port_info *port_info[2]; + struct ata_port_info *port = &info; + + u8 irqmask; + u32 class_rev; + + unsigned int pci_mhz; + unsigned int f_low, f_high; + int adjust; + + pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); + class_rev &= 0xFF; + + switch(dev->device) { + case PCI_DEVICE_ID_TTI_HPT366: + if (class_rev < 6) + return -ENODEV; + break; + case PCI_DEVICE_ID_TTI_HPT372: + /* 372N if rev >= 1*/ + if (class_rev == 0) + return -ENODEV; + break; + case PCI_DEVICE_ID_TTI_HPT302: + if (class_rev < 2) + return -ENODEV; + break; + case PCI_DEVICE_ID_TTI_HPT372N: + break; + default: + printk(KERN_ERR "pata_hpt3x2n: PCI table is bogus please report (%d).\n", dev->device); + return -ENODEV; + } + + /* Ok so this is a chip we support */ + + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4)); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78); + pci_write_config_byte(dev, PCI_MIN_GNT, 0x08); + pci_write_config_byte(dev, PCI_MAX_LAT, 0x08); + + pci_read_config_byte(dev, 0x5A, &irqmask); + irqmask &= ~0x10; + pci_write_config_byte(dev, 0x5a, irqmask); + + /* Tune the PLL. HPT recommend using 75 for SATA, 66 for UDMA133 or + 50 for UDMA100. Right now we always use 66 */ + + pci_mhz = hpt3x2n_pci_clock(dev); + + f_low = (pci_mhz * 48) / 66; /* PCI Mhz for 66Mhz DPLL */ + f_high = f_low + 2; /* Tolerance */ + + pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low | 0x100); + /* PLL clock */ + pci_write_config_byte(dev, 0x5B, 0x21); + + /* Unlike the 37x we don't try jiggling the frequency */ + for(adjust = 0; adjust < 8; adjust++) { + if (hpt3xn_calibrate_dpll(dev)) + break; + pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low); + } + if (adjust == 8) + printk(KERN_WARNING "hpt3xn: DPLL did not stabilize.\n"); + + /* Set our private data up. We only need a few flags so we use + it directly */ + port->private_data = NULL; + if (pci_mhz > 60) + port->private_data = (void *)PCI66; + + /* Now kick off ATA set up */ + port_info[0] = port_info[1] = port; + return ata_pci_init_one(dev, port_info, 2); +} + +static struct pci_device_id hpt3x2n[] = { + { PCI_DEVICE(PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT366), }, + { PCI_DEVICE(PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT372), }, + { PCI_DEVICE(PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT302), }, + { PCI_DEVICE(PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT372N), }, + { 0, }, +}; + +static struct pci_driver hpt3x2n_pci_driver = { + .name = DRV_NAME, + .id_table = hpt3x2n, + .probe = hpt3x2n_init_one, + .remove = ata_pci_remove_one +}; + +static int __init hpt3x2n_init(void) +{ + return pci_register_driver(&hpt3x2n_pci_driver); +} + + +static void __exit hpt3x2n_exit(void) +{ + pci_unregister_driver(&hpt3x2n_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for the Highpoint HPT3x2n/30x"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, hpt3x2n); +MODULE_VERSION(DRV_VERSION); + +module_init(hpt3x2n_init); +module_exit(hpt3x2n_exit); diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c new file mode 100644 index 00000000000..c93406ebf6e --- /dev/null +++ b/drivers/ata/pata_hpt3x3.c @@ -0,0 +1,226 @@ +/* + * pata_hpt3x3 - HPT3x3 driver + * (c) Copyright 2005-2006 Red Hat + * + * Was pata_hpt34x but the naming was confusing as it supported the + * 343 and 363 so it has been renamed. + * + * Based on: + * linux/drivers/ide/pci/hpt34x.c Version 0.40 Sept 10, 2002 + * Copyright (C) 1998-2000 Andre Hedrick + * + * May be copied or modified under the terms of the GNU General Public + * License + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_hpt3x3" +#define DRV_VERSION "0.4.1" + +static int hpt3x3_probe_init(struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +/** + * hpt3x3_probe_reset - reset the hpt3x3 bus + * @ap: ATA port to reset + * + * Perform the housekeeping when doing an ATA bus reeset. We just + * need to force the cable type. + */ + +static void hpt3x3_error_handler(struct ata_port *ap) +{ + return ata_bmdma_drive_eh(ap, hpt3x3_probe_init, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * hpt3x3_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Set our PIO requirements. This is fairly simple on the HPT3x3 as + * all we have to do is clear the MWDMA and UDMA bits then load the + * mode number. + */ + +static void hpt3x3_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 r1, r2; + int dn = 2 * ap->port_no + adev->devno; + + pci_read_config_dword(pdev, 0x44, &r1); + pci_read_config_dword(pdev, 0x48, &r2); + /* Load the PIO timing number */ + r1 &= ~(7 << (3 * dn)); + r1 |= (adev->pio_mode - XFER_PIO_0) << (3 * dn); + r2 &= ~(0x11 << dn); /* Clear MWDMA and UDMA bits */ + + pci_write_config_dword(pdev, 0x44, r1); + pci_write_config_dword(pdev, 0x48, r2); +} + +/** + * hpt3x3_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + * Set up the channel for MWDMA or UDMA modes. Much the same as with + * PIO, load the mode number and then set MWDMA or UDMA flag. + */ + +static void hpt3x3_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 r1, r2; + int dn = 2 * ap->port_no + adev->devno; + int mode_num = adev->dma_mode & 0x0F; + + pci_read_config_dword(pdev, 0x44, &r1); + pci_read_config_dword(pdev, 0x48, &r2); + /* Load the timing number */ + r1 &= ~(7 << (3 * dn)); + r1 |= (mode_num << (3 * dn)); + r2 &= ~(0x11 << dn); /* Clear MWDMA and UDMA bits */ + + if (adev->dma_mode >= XFER_UDMA_0) + r2 |= 0x01 << dn; /* Ultra mode */ + else + r2 |= 0x10 << dn; /* MWDMA */ + + pci_write_config_dword(pdev, 0x44, r1); + pci_write_config_dword(pdev, 0x48, r2); +} + +static struct scsi_host_template hpt3x3_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations hpt3x3_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = hpt3x3_set_piomode, + .set_dmamode = hpt3x3_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = hpt3x3_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * hpt3x3_init_one - Initialise an HPT343/363 + * @dev: PCI device + * @id: Entry in match table + * + * Perform basic initialisation. The chip has a quirk that it won't + * function unless it is at XX00. The old ATA driver touched this up + * but we leave it for pci quirks to do properly. + */ + +static int hpt3x3_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .sht = &hpt3x3_sht, + .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x07, + .port_ops = &hpt3x3_port_ops + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + u16 cmd; + + /* Initialize the board */ + pci_write_config_word(dev, 0x80, 0x00); + /* Check if it is a 343 or a 363. 363 has COMMAND_MEMORY set */ + pci_read_config_word(dev, PCI_COMMAND, &cmd); + if (cmd & PCI_COMMAND_MEMORY) + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xF0); + else + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20); + + /* Now kick off ATA set up */ + return ata_pci_init_one(dev, port_info, 2); +} + +static struct pci_device_id hpt3x3[] = { + { PCI_DEVICE(PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT343), }, + { 0, }, +}; + +static struct pci_driver hpt3x3_pci_driver = { + .name = DRV_NAME, + .id_table = hpt3x3, + .probe = hpt3x3_init_one, + .remove = ata_pci_remove_one +}; + +static int __init hpt3x3_init(void) +{ + return pci_register_driver(&hpt3x3_pci_driver); +} + + +static void __exit hpt3x3_exit(void) +{ + pci_unregister_driver(&hpt3x3_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for the Highpoint HPT343/363"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, hpt3x3); +MODULE_VERSION(DRV_VERSION); + +module_init(hpt3x3_init); +module_exit(hpt3x3_exit); diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c new file mode 100644 index 00000000000..73948c8b727 --- /dev/null +++ b/drivers/ata/pata_isapnp.c @@ -0,0 +1,156 @@ + +/* + * pata-isapnp.c - ISA PnP PATA controller driver. + * Copyright 2005/2006 Red Hat Inc , all rights reserved. + * + * Based in part on ide-pnp.c by Andrey Panin + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_isapnp" +#define DRV_VERSION "0.1.5" + +static struct scsi_host_template isapnp_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations isapnp_port_ops = { + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * isapnp_init_one - attach an isapnp interface + * @idev: PnP device + * @dev_id: matching detect line + * + * Register an ISA bus IDE interface. Such interfaces are PIO 0 and + * non shared IRQ. + */ + +static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev_id) +{ + struct ata_probe_ent ae; + + if (pnp_port_valid(idev, 0) == 0) + return -ENODEV; + + /* FIXME: Should selected polled PIO here not fail */ + if (pnp_irq_valid(idev, 0) == 0) + return -ENODEV; + + memset(&ae, 0, sizeof(struct ata_probe_ent)); + INIT_LIST_HEAD(&ae.node); + ae.dev = &idev->dev; + ae.port_ops = &isapnp_port_ops; + ae.sht = &isapnp_sht; + ae.n_ports = 1; + ae.pio_mask = 1; /* ISA so PIO 0 cycles */ + ae.irq = pnp_irq(idev, 0); + ae.irq_flags = 0; + ae.port_flags = ATA_FLAG_SLAVE_POSS; + ae.port[0].cmd_addr = pnp_port_start(idev, 0); + + if (pnp_port_valid(idev, 1) == 0) { + ae.port[0].altstatus_addr = pnp_port_start(idev, 1); + ae.port[0].ctl_addr = pnp_port_start(idev, 1); + ae.port_flags |= ATA_FLAG_SRST; + } + ata_std_ports(&ae.port[0]); + + if (ata_device_add(&ae) == 0) + return -ENODEV; + return 0; +} + +/** + * isapnp_remove_one - unplug an isapnp interface + * @idev: PnP device + * + * Remove a previously configured PnP ATA port. Called only on module + * unload events as the core does not currently deal with ISAPnP docking. + */ + +static void isapnp_remove_one(struct pnp_dev *idev) +{ + struct device *dev = &idev->dev; + struct ata_host *host = dev_get_drvdata(dev); + + ata_host_remove(host); + dev_set_drvdata(dev, NULL); +} + +static struct pnp_device_id isapnp_devices[] = { + /* Generic ESDI/IDE/ATA compatible hard disk controller */ + {.id = "PNP0600", .driver_data = 0}, + {.id = ""} +}; + +static struct pnp_driver isapnp_driver = { + .name = DRV_NAME, + .id_table = isapnp_devices, + .probe = isapnp_init_one, + .remove = isapnp_remove_one, +}; + +static int __init isapnp_init(void) +{ + return pnp_register_driver(&isapnp_driver); +} + +static void __exit isapnp_exit(void) +{ + pnp_unregister_driver(&isapnp_driver); +} + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for ISA PnP ATA"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +module_init(isapnp_init); +module_exit(isapnp_exit); diff --git a/drivers/ata/pata_it8172.c b/drivers/ata/pata_it8172.c new file mode 100644 index 00000000000..f8367191fc7 --- /dev/null +++ b/drivers/ata/pata_it8172.c @@ -0,0 +1,288 @@ +/* + * pata_it8172.c - IT8172 PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox + * + * Based heavily on + * + * BRIEF MODULE DESCRIPTION + * IT8172 IDE controller support + * + * Copyright 2000 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * stevel@mvista.com or source@mvista.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * TODO + * Check for errata + * See if we really need to force native mode + * PIO timings (also lacking in original) + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_it8172" +#define DRV_VERSION "0.3.1" + +static int it8172_pre_reset(struct ata_port *ap) +{ + static const struct pci_bits it8172_enable_bits[] = { + { 0x00, 0, 0x00, 0x00 }, + { 0x40, 1, 0x00, 0x01 } + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (ap->port_no && !pci_test_config_bits(pdev, &it8172_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +static void it8172_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, it8172_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * it8172_set_pio_timing - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called by both the pio and dma setup functions to set the controller + * timings for PIO transfers. We must load both the mode number and + * timing values into the controller. + */ + +static void it8172_set_pio_timing(struct ata_port *ap, struct ata_device *adev, int pio) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u16 reg40; + + pci_read_config_word(pdev, 0x40, ®40); + + /* + * FIX! The DIOR/DIOW pulse width and recovery times in port 0x44 + * are being left at the default values of 8 PCI clocks (242 nsec + * for a 33 MHz clock). These can be safely shortened at higher + * PIO modes. The DIOR/DIOW pulse width and recovery times only + * apply to PIO modes, not to the DMA modes. + */ + + /* + * Enable port 0x44. The IT8172G spec is confused; it calls + * this register the "Slave IDE Timing Register", but in fact, + * it controls timing for both master and slave drives. + */ + + reg40 |= 0x4000; + if (adev->devno) { + reg40 &= 0xC006; + if (pio > 1) + /* Enable prefetch and IORDY sample-point */ + reg40 |= 0x0060; + } else { + reg40 &= 0xC060; + if (pio > 1) + /* Enable prefetch and IORDY sample-point */ + reg40 |= 0x0006; + } + /* Write back the enables */ + pci_write_config_word(pdev, 0x40, reg40); +} + +/** + * it8172_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. We use a shared helper for this + * as the DMA setup must also adjust the PIO timing information. + */ + +static void it8172_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + it8172_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0); +} + +/** + * it8172_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the DMA mode setup. We must tune an appropriate PIO + * mode to match. + */ + +static void it8172_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = (2 * ap->port_no) + adev->devno; + u8 reg48, reg4a; + int pio; + + static const int pio_map[] = { 1, 3, 4}; + /* + * Setting the DMA cycle time to 2 or 3 PCI clocks (60 and 91 nsec + * at 33 MHz PCI clock) seems to cause BadCRC errors during DMA + * transfers on some drives, even though both numbers meet the minimum + * ATAPI-4 spec of 73 and 54 nsec for UDMA 1 and 2 respectively. + * So the faster times are just commented out here. The good news is + * that the slower cycle time has very little affect on transfer + * performance. + */ + + pci_read_config_byte(pdev, 0x48, ®48); + pci_read_config_byte(pdev, 0x4A, ®4a); + + reg4a &= ~(3 << (4 * dn)); + + if (adev->dma_mode >= XFER_UDMA_0) { + reg48 |= 1 << dn; +#ifdef UDMA_TIMING_SET + reg4a |= ((adev->dma_mode - XFER_UDMA_0) << (4 * dn)); +#endif + pio = 4; + } else { + pio = pio_map[adev->dma_mode - XFER_MW_DMA_0]; + reg48 &= ~ (1 << dn); + } + pci_write_config_byte(pdev, 0x48, reg48); + pci_write_config_byte(pdev, 0x4A, reg4a); + it8172_set_pio_timing(ap, adev, pio); + +} + +static struct scsi_host_template it8172_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations it8172_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = it8172_set_piomode, + .set_dmamode = it8172_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = it8172_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int it8172_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .sht = &it8172_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x06, /* No MWDMA0 support */ + .udma_mask = 0x7, + .port_ops = &it8172_port_ops + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + + if ((!(PCI_FUNC(dev->devfn) & 1) || + (!((dev->class >> 8) == PCI_CLASS_STORAGE_IDE)))) + return -ENODEV; /* IT8172 is more than an IDE controller */ + + return ata_pci_init_one(dev, port_info, 2); +} + +static struct pci_device_id it8172[] = { + { PCI_DEVICE(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_IT8172G), }, + { 0, }, +}; + +static struct pci_driver it8172_pci_driver = { + .name = DRV_NAME, + .id_table = it8172, + .probe = it8172_init_one, + .remove = ata_pci_remove_one +}; + +static int __init it8172_init(void) +{ + return pci_register_driver(&it8172_pci_driver); +} + + +static void __exit it8172_exit(void) +{ + pci_unregister_driver(&it8172_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for ITE IT8172"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, it8172); +MODULE_VERSION(DRV_VERSION); + +module_init(it8172_init); +module_exit(it8172_exit); diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c new file mode 100644 index 00000000000..c8a7798f8ce --- /dev/null +++ b/drivers/ata/pata_it821x.c @@ -0,0 +1,847 @@ +/* + * ata-it821x.c - IT821x PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox + * + * based upon + * + * it821x.c + * + * linux/drivers/ide/pci/it821x.c Version 0.09 December 2004 + * + * Copyright (C) 2004 Red Hat + * + * May be copied or modified under the terms of the GNU General Public License + * Based in part on the ITE vendor provided SCSI driver. + * + * Documentation available from + * http://www.ite.com.tw/pc/IT8212F_V04.pdf + * Some other documents are NDA. + * + * The ITE8212 isn't exactly a standard IDE controller. It has two + * modes. In pass through mode then it is an IDE controller. In its smart + * mode its actually quite a capable hardware raid controller disguised + * as an IDE controller. Smart mode only understands DMA read/write and + * identify, none of the fancier commands apply. The IT8211 is identical + * in other respects but lacks the raid mode. + * + * Errata: + * o Rev 0x10 also requires master/slave hold the same DMA timings and + * cannot do ATAPI MWDMA. + * o The identify data for raid volumes lacks CHS info (technically ok) + * but also fails to set the LBA28 and other bits. We fix these in + * the IDE probe quirk code. + * o If you write LBA48 sized I/O's (ie > 256 sector) in smart mode + * raid then the controller firmware dies + * o Smart mode without RAID doesn't clear all the necessary identify + * bits to reduce the command set to the one used + * + * This has a few impacts on the driver + * - In pass through mode we do all the work you would expect + * - In smart mode the clocking set up is done by the controller generally + * but we must watch the other limits and filter. + * - There are a few extra vendor commands that actually talk to the + * controller but only work PIO with no IRQ. + * + * Vendor areas of the identify block in smart mode are used for the + * timing and policy set up. Each HDD in raid mode also has a serial + * block on the disk. The hardware extra commands are get/set chip status, + * rebuild, get rebuild status. + * + * In Linux the driver supports pass through mode as if the device was + * just another IDE controller. If the smart mode is running then + * volumes are managed by the controller firmware and each IDE "disk" + * is a raid volume. Even more cute - the controller can do automated + * hotplug and rebuild. + * + * The pass through controller itself is a little demented. It has a + * flaw that it has a single set of PIO/MWDMA timings per channel so + * non UDMA devices restrict each others performance. It also has a + * single clock source per channel so mixed UDMA100/133 performance + * isn't perfect and we have to pick a clock. Thankfully none of this + * matters in smart mode. ATAPI DMA is not currently supported. + * + * It seems the smart mode is a win for RAID1/RAID10 but otherwise not. + * + * TODO + * - ATAPI and other speed filtering + * - Command filter in smart mode + * - RAID configuration ioctls + */ + +#include +#include +#include +#include +#include +#include +#include +#include + + +#define DRV_NAME "pata_it821x" +#define DRV_VERSION "0.3.2" + +struct it821x_dev +{ + unsigned int smart:1, /* Are we in smart raid mode */ + timing10:1; /* Rev 0x10 */ + u8 clock_mode; /* 0, ATA_50 or ATA_66 */ + u8 want[2][2]; /* Mode/Pri log for master slave */ + /* We need these for switching the clock when DMA goes on/off + The high byte is the 66Mhz timing */ + u16 pio[2]; /* Cached PIO values */ + u16 mwdma[2]; /* Cached MWDMA values */ + u16 udma[2]; /* Cached UDMA values (per drive) */ + u16 last_device; /* Master or slave loaded ? */ +}; + +#define ATA_66 0 +#define ATA_50 1 +#define ATA_ANY 2 + +#define UDMA_OFF 0 +#define MWDMA_OFF 0 + +/* + * We allow users to force the card into non raid mode without + * flashing the alternative BIOS. This is also neccessary right now + * for embedded platforms that cannot run a PC BIOS but are using this + * device. + */ + +static int it8212_noraid; + +/** + * it821x_pre_reset - probe + * @ap: ATA port + * + * Set the cable type + */ + +static int it821x_pre_reset(struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA80; + return ata_std_prereset(ap); +} + +/** + * it821x_error_handler - probe/reset + * @ap: ATA port + * + * Set the cable type and trigger a probe + */ + +static void it821x_error_handler(struct ata_port *ap) +{ + return ata_bmdma_drive_eh(ap, it821x_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * it821x_program - program the PIO/MWDMA registers + * @ap: ATA port + * @adev: Device to program + * @timing: Timing value (66Mhz in top 8bits, 50 in the low 8) + * + * Program the PIO/MWDMA timing for this channel according to the + * current clock. These share the same register so are managed by + * the DMA start/stop sequence as with the old driver. + */ + +static void it821x_program(struct ata_port *ap, struct ata_device *adev, u16 timing) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct it821x_dev *itdev = ap->private_data; + int channel = ap->port_no; + u8 conf; + + /* Program PIO/MWDMA timing bits */ + if (itdev->clock_mode == ATA_66) + conf = timing >> 8; + else + conf = timing & 0xFF; + pci_write_config_byte(pdev, 0x54 + 4 * channel, conf); +} + + +/** + * it821x_program_udma - program the UDMA registers + * @ap: ATA port + * @adev: ATA device to update + * @timing: Timing bits. Top 8 are for 66Mhz bottom for 50Mhz + * + * Program the UDMA timing for this drive according to the + * current clock. Handles the dual clocks and also knows about + * the errata on the 0x10 revision. The UDMA errata is partly handled + * here and partly in start_dma. + */ + +static void it821x_program_udma(struct ata_port *ap, struct ata_device *adev, u16 timing) +{ + struct it821x_dev *itdev = ap->private_data; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int channel = ap->port_no; + int unit = adev->devno; + u8 conf; + + /* Program UDMA timing bits */ + if (itdev->clock_mode == ATA_66) + conf = timing >> 8; + else + conf = timing & 0xFF; + if (itdev->timing10 == 0) + pci_write_config_byte(pdev, 0x56 + 4 * channel + unit, conf); + else { + /* Early revision must be programmed for both together */ + pci_write_config_byte(pdev, 0x56 + 4 * channel, conf); + pci_write_config_byte(pdev, 0x56 + 4 * channel + 1, conf); + } +} + +/** + * it821x_clock_strategy + * @ap: ATA interface + * @adev: ATA device being updated + * + * Select between the 50 and 66Mhz base clocks to get the best + * results for this interface. + */ + +static void it821x_clock_strategy(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct it821x_dev *itdev = ap->private_data; + u8 unit = adev->devno; + struct ata_device *pair = ata_dev_pair(adev); + + int clock, altclock; + u8 v; + int sel = 0; + + /* Look for the most wanted clocking */ + if (itdev->want[0][0] > itdev->want[1][0]) { + clock = itdev->want[0][1]; + altclock = itdev->want[1][1]; + } else { + clock = itdev->want[1][1]; + altclock = itdev->want[0][1]; + } + + /* Master doesn't care does the slave ? */ + if (clock == ATA_ANY) + clock = altclock; + + /* Nobody cares - keep the same clock */ + if (clock == ATA_ANY) + return; + /* No change */ + if (clock == itdev->clock_mode) + return; + + /* Load this into the controller */ + if (clock == ATA_66) + itdev->clock_mode = ATA_66; + else { + itdev->clock_mode = ATA_50; + sel = 1; + } + pci_read_config_byte(pdev, 0x50, &v); + v &= ~(1 << (1 + ap->port_no)); + v |= sel << (1 + ap->port_no); + pci_write_config_byte(pdev, 0x50, v); + + /* + * Reprogram the UDMA/PIO of the pair drive for the switch + * MWDMA will be dealt with by the dma switcher + */ + if (pair && itdev->udma[1-unit] != UDMA_OFF) { + it821x_program_udma(ap, pair, itdev->udma[1-unit]); + it821x_program(ap, pair, itdev->pio[1-unit]); + } + /* + * Reprogram the UDMA/PIO of our drive for the switch. + * MWDMA will be dealt with by the dma switcher + */ + if (itdev->udma[unit] != UDMA_OFF) { + it821x_program_udma(ap, adev, itdev->udma[unit]); + it821x_program(ap, adev, itdev->pio[unit]); + } +} + +/** + * it821x_passthru_set_piomode - set PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Configure for PIO mode. This is complicated as the register is + * shared by PIO and MWDMA and for both channels. + */ + +static void it821x_passthru_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + /* Spec says 89 ref driver uses 88 */ + static const u16 pio[] = { 0xAA88, 0xA382, 0xA181, 0x3332, 0x3121 }; + static const u8 pio_want[] = { ATA_66, ATA_66, ATA_66, ATA_66, ATA_ANY }; + + struct it821x_dev *itdev = ap->private_data; + int unit = adev->devno; + int mode_wanted = adev->pio_mode - XFER_PIO_0; + + /* We prefer 66Mhz clock for PIO 0-3, don't care for PIO4 */ + itdev->want[unit][1] = pio_want[mode_wanted]; + itdev->want[unit][0] = 1; /* PIO is lowest priority */ + itdev->pio[unit] = pio[mode_wanted]; + it821x_clock_strategy(ap, adev); + it821x_program(ap, adev, itdev->pio[unit]); +} + +/** + * it821x_passthru_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Set up the DMA modes. The actions taken depend heavily on the mode + * to use. If UDMA is used as is hopefully the usual case then the + * timing register is private and we need only consider the clock. If + * we are using MWDMA then we have to manage the setting ourself as + * we switch devices and mode. + */ + +static void it821x_passthru_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static const u16 dma[] = { 0x8866, 0x3222, 0x3121 }; + static const u8 mwdma_want[] = { ATA_ANY, ATA_66, ATA_ANY }; + static const u16 udma[] = { 0x4433, 0x4231, 0x3121, 0x2121, 0x1111, 0x2211, 0x1111 }; + static const u8 udma_want[] = { ATA_ANY, ATA_50, ATA_ANY, ATA_66, ATA_66, ATA_50, ATA_66 }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct it821x_dev *itdev = ap->private_data; + int channel = ap->port_no; + int unit = adev->devno; + u8 conf; + + if (adev->dma_mode >= XFER_UDMA_0) { + int mode_wanted = adev->dma_mode - XFER_UDMA_0; + + itdev->want[unit][1] = udma_want[mode_wanted]; + itdev->want[unit][0] = 3; /* UDMA is high priority */ + itdev->mwdma[unit] = MWDMA_OFF; + itdev->udma[unit] = udma[mode_wanted]; + if (mode_wanted >= 5) + itdev->udma[unit] |= 0x8080; /* UDMA 5/6 select on */ + + /* UDMA on. Again revision 0x10 must do the pair */ + pci_read_config_byte(pdev, 0x50, &conf); + if (itdev->timing10) + conf &= channel ? 0x9F: 0xE7; + else + conf &= ~ (1 << (3 + 2 * channel + unit)); + pci_write_config_byte(pdev, 0x50, conf); + it821x_clock_strategy(ap, adev); + it821x_program_udma(ap, adev, itdev->udma[unit]); + } else { + int mode_wanted = adev->dma_mode - XFER_MW_DMA_0; + + itdev->want[unit][1] = mwdma_want[mode_wanted]; + itdev->want[unit][0] = 2; /* MWDMA is low priority */ + itdev->mwdma[unit] = dma[mode_wanted]; + itdev->udma[unit] = UDMA_OFF; + + /* UDMA bits off - Revision 0x10 do them in pairs */ + pci_read_config_byte(pdev, 0x50, &conf); + if (itdev->timing10) + conf |= channel ? 0x60: 0x18; + else + conf |= 1 << (3 + 2 * channel + unit); + pci_write_config_byte(pdev, 0x50, conf); + it821x_clock_strategy(ap, adev); + } +} + +/** + * it821x_passthru_dma_start - DMA start callback + * @qc: Command in progress + * + * Usually drivers set the DMA timing at the point the set_dmamode call + * is made. IT821x however requires we load new timings on the + * transitions in some cases. + */ + +static void it821x_passthru_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct it821x_dev *itdev = ap->private_data; + int unit = adev->devno; + + if (itdev->mwdma[unit] != MWDMA_OFF) + it821x_program(ap, adev, itdev->mwdma[unit]); + else if (itdev->udma[unit] != UDMA_OFF && itdev->timing10) + it821x_program_udma(ap, adev, itdev->udma[unit]); + ata_bmdma_start(qc); +} + +/** + * it821x_passthru_dma_stop - DMA stop callback + * @qc: ATA command + * + * We loaded new timings in dma_start, as a result we need to restore + * the PIO timings in dma_stop so that the next command issue gets the + * right clock values. + */ + +static void it821x_passthru_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct it821x_dev *itdev = ap->private_data; + int unit = adev->devno; + + ata_bmdma_stop(qc); + if (itdev->mwdma[unit] != MWDMA_OFF) + it821x_program(ap, adev, itdev->pio[unit]); +} + + +/** + * it821x_passthru_dev_select - Select master/slave + * @ap: ATA port + * @device: Device number (not pointer) + * + * Device selection hook. If neccessary perform clock switching + */ + +static void it821x_passthru_dev_select(struct ata_port *ap, + unsigned int device) +{ + struct it821x_dev *itdev = ap->private_data; + if (itdev && device != itdev->last_device) { + struct ata_device *adev = &ap->device[device]; + it821x_program(ap, adev, itdev->pio[adev->devno]); + itdev->last_device = device; + } + ata_std_dev_select(ap, device); +} + +/** + * it821x_smart_qc_issue_prot - wrap qc issue prot + * @qc: command + * + * Wrap the command issue sequence for the IT821x. We need to + * perform out own device selection timing loads before the + * usual happenings kick off + */ + +static unsigned int it821x_smart_qc_issue_prot(struct ata_queued_cmd *qc) +{ + switch(qc->tf.command) + { + /* Commands the firmware supports */ + case ATA_CMD_READ: + case ATA_CMD_READ_EXT: + case ATA_CMD_WRITE: + case ATA_CMD_WRITE_EXT: + case ATA_CMD_PIO_READ: + case ATA_CMD_PIO_READ_EXT: + case ATA_CMD_PIO_WRITE: + case ATA_CMD_PIO_WRITE_EXT: + case ATA_CMD_READ_MULTI: + case ATA_CMD_READ_MULTI_EXT: + case ATA_CMD_WRITE_MULTI: + case ATA_CMD_WRITE_MULTI_EXT: + case ATA_CMD_ID_ATA: + /* Arguably should just no-op this one */ + case ATA_CMD_SET_FEATURES: + return ata_qc_issue_prot(qc); + } + printk(KERN_DEBUG "it821x: can't process command 0x%02X\n", qc->tf.command); + return AC_ERR_INVALID; +} + +/** + * it821x_passthru_qc_issue_prot - wrap qc issue prot + * @qc: command + * + * Wrap the command issue sequence for the IT821x. We need to + * perform out own device selection timing loads before the + * usual happenings kick off + */ + +static unsigned int it821x_passthru_qc_issue_prot(struct ata_queued_cmd *qc) +{ + it821x_passthru_dev_select(qc->ap, qc->dev->devno); + return ata_qc_issue_prot(qc); +} + +/** + * it821x_smart_set_mode - mode setting + * @ap: interface to set up + * + * Use a non standard set_mode function. We don't want to be tuned. + * The BIOS configured everything. Our job is not to fiddle. We + * read the dma enabled bits from the PCI configuration of the device + * and respect them. + */ + +static void it821x_smart_set_mode(struct ata_port *ap) +{ + int dma_enabled = 0; + int i; + + /* Bits 5 and 6 indicate if DMA is active on master/slave */ + /* It is possible that BMDMA isn't allocated */ + if (ap->ioaddr.bmdma_addr) + dma_enabled = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + if (ata_dev_enabled(dev)) { + /* We don't really care */ + dev->pio_mode = XFER_PIO_0; + dev->dma_mode = XFER_MW_DMA_0; + /* We do need the right mode information for DMA or PIO + and this comes from the current configuration flags */ + if (dma_enabled & (1 << (5 + i))) { + dev->xfer_mode = XFER_MW_DMA_0; + dev->xfer_shift = ATA_SHIFT_MWDMA; + dev->flags &= ~ATA_DFLAG_PIO; + } else { + dev->xfer_mode = XFER_PIO_0; + dev->xfer_shift = ATA_SHIFT_PIO; + dev->flags |= ATA_DFLAG_PIO; + } + } + } +} + +/** + * it821x_dev_config - Called each device identify + * @ap: ATA port + * @adev: Device that has just been identified + * + * Perform the initial setup needed for each device that is chip + * special. In our case we need to lock the sector count to avoid + * blowing the brains out of the firmware with large LBA48 requests + * + * FIXME: When FUA appears we need to block FUA too. And SMART and + * basically we need to filter commands for this chip. + */ + +static void it821x_dev_config(struct ata_port *ap, struct ata_device *adev) +{ + unsigned char model_num[40]; + char *s; + unsigned int len; + + /* This block ought to be a library routine as it is in several + drivers now */ + + ata_id_string(adev->id, model_num, ATA_ID_PROD_OFS, + sizeof(model_num)); + s = &model_num[0]; + len = strnlen(s, sizeof(model_num)); + + /* ATAPI specifies that empty space is blank-filled; remove blanks */ + while ((len > 0) && (s[len - 1] == ' ')) { + len--; + s[len] = 0; + } + + if (adev->max_sectors > 255) + adev->max_sectors = 255; + + if (strstr(model_num, "Integrated Technology Express")) { + /* RAID mode */ + printk(KERN_INFO "IT821x %sRAID%d volume", + adev->id[147]?"Bootable ":"", + adev->id[129]); + if (adev->id[129] != 1) + printk("(%dK stripe)", adev->id[146]); + printk(".\n"); + } +} + + +/** + * it821x_check_atapi_dma - ATAPI DMA handler + * @qc: Command we are about to issue + * + * Decide if this ATAPI command can be issued by DMA on this + * controller. Return 0 if it can be. + */ + +static int it821x_check_atapi_dma(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct it821x_dev *itdev = ap->private_data; + + /* No ATAPI DMA in smart mode */ + if (itdev->smart) + return -EOPNOTSUPP; + /* No ATAPI DMA on rev 10 */ + if (itdev->timing10) + return -EOPNOTSUPP; + /* Cool */ + return 0; +} + + +/** + * it821x_port_start - port setup + * @ap: ATA port being set up + * + * The it821x needs to maintain private data structures and also to + * use the standard PCI interface which lacks support for this + * functionality. We instead set up the private data on the port + * start hook, and tear it down on port stop + */ + +static int it821x_port_start(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct it821x_dev *itdev; + u8 conf; + + int ret = ata_port_start(ap); + if (ret < 0) + return ret; + + ap->private_data = kmalloc(sizeof(struct it821x_dev), GFP_KERNEL); + if (ap->private_data == NULL) { + ata_port_stop(ap); + return -ENOMEM; + } + + itdev = ap->private_data; + memset(itdev, 0, sizeof(struct it821x_dev)); + + pci_read_config_byte(pdev, 0x50, &conf); + + if (conf & 1) { + itdev->smart = 1; + /* Long I/O's although allowed in LBA48 space cause the + onboard firmware to enter the twighlight zone */ + /* No ATAPI DMA in this mode either */ + } + /* Pull the current clocks from 0x50 */ + if (conf & (1 << (1 + ap->port_no))) + itdev->clock_mode = ATA_50; + else + itdev->clock_mode = ATA_66; + + itdev->want[0][1] = ATA_ANY; + itdev->want[1][1] = ATA_ANY; + itdev->last_device = -1; + + pci_read_config_byte(pdev, PCI_REVISION_ID, &conf); + if (conf == 0x10) { + itdev->timing10 = 1; + /* Need to disable ATAPI DMA for this case */ + if (!itdev->smart) + printk(KERN_WARNING DRV_NAME": Revision 0x10, workarounds activated.\n"); + } + + return 0; +} + +/** + * it821x_port_stop - port shutdown + * @ap: ATA port being removed + * + * Release the private objects we added in it821x_port_start + */ + +static void it821x_port_stop(struct ata_port *ap) { + kfree(ap->private_data); + ap->private_data = NULL; /* We want an OOPS if we reuse this + too late! */ + ata_port_stop(ap); +} + +static struct scsi_host_template it821x_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + /* 255 sectors to begin with. This is locked in smart mode but not + in pass through */ + .max_sectors = 255, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations it821x_smart_port_ops = { + .set_mode = it821x_smart_set_mode, + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .mode_filter = ata_pci_default_filter, + + .check_status = ata_check_status, + .check_atapi_dma= it821x_check_atapi_dma, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + .dev_config = it821x_dev_config, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = it821x_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = it821x_smart_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = it821x_port_start, + .port_stop = it821x_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations it821x_passthru_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = it821x_passthru_set_piomode, + .set_dmamode = it821x_passthru_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .check_atapi_dma= it821x_check_atapi_dma, + .dev_select = it821x_passthru_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = it821x_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = it821x_passthru_bmdma_start, + .bmdma_stop = it821x_passthru_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = it821x_passthru_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_clear = ata_bmdma_irq_clear, + .irq_handler = ata_interrupt, + + .port_start = it821x_port_start, + .port_stop = it821x_port_stop, + .host_stop = ata_host_stop +}; + +static void __devinit it821x_disable_raid(struct pci_dev *pdev) +{ + /* Reset local CPU, and set BIOS not ready */ + pci_write_config_byte(pdev, 0x5E, 0x01); + + /* Set to bypass mode, and reset PCI bus */ + pci_write_config_byte(pdev, 0x50, 0x00); + pci_write_config_word(pdev, PCI_COMMAND, + PCI_COMMAND_PARITY | PCI_COMMAND_IO | + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + pci_write_config_word(pdev, 0x40, 0xA0F3); + + pci_write_config_dword(pdev,0x4C, 0x02040204); + pci_write_config_byte(pdev, 0x42, 0x36); + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x20); +} + + +static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + u8 conf; + + static struct ata_port_info info_smart = { + .sht = &it821x_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &it821x_smart_port_ops + }; + static struct ata_port_info info_passthru = { + .sht = &it821x_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, + .port_ops = &it821x_passthru_port_ops + }; + static struct ata_port_info *port_info[2]; + + static char *mode[2] = { "pass through", "smart" }; + + /* Force the card into bypass mode if so requested */ + if (it8212_noraid) { + printk(KERN_INFO DRV_NAME ": forcing bypass mode.\n"); + it821x_disable_raid(pdev); + } + pci_read_config_byte(pdev, 0x50, &conf); + conf &= 1; + + printk(KERN_INFO DRV_NAME ": controller in %s mode.\n", mode[conf]); + if (conf == 0) + port_info[0] = port_info[1] = &info_passthru; + else + port_info[0] = port_info[1] = &info_smart; + + return ata_pci_init_one(pdev, port_info, 2); +} + +static struct pci_device_id it821x[] = { + { PCI_DEVICE(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8211), }, + { PCI_DEVICE(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8212), }, + { 0, }, +}; + +static struct pci_driver it821x_pci_driver = { + .name = DRV_NAME, + .id_table = it821x, + .probe = it821x_init_one, + .remove = ata_pci_remove_one +}; + +static int __init it821x_init(void) +{ + return pci_register_driver(&it821x_pci_driver); +} + + +static void __exit it821x_exit(void) +{ + pci_unregister_driver(&it821x_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for the IT8211/IT8212 IDE RAID controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, it821x); +MODULE_VERSION(DRV_VERSION); + + +module_param_named(noraid, it8212_noraid, int, S_IRUGO); +MODULE_PARM_DESC(it8212_noraid, "Force card into bypass mode"); + +module_init(it821x_init); +module_exit(it821x_exit); diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c new file mode 100644 index 00000000000..6832a643a9e --- /dev/null +++ b/drivers/ata/pata_jmicron.c @@ -0,0 +1,266 @@ +/* + * pata_jmicron.c - JMicron ATA driver for non AHCI mode. This drives the + * PATA port of the controller. The SATA ports are + * driven by AHCI in the usual configuration although + * this driver can handle other setups if we need it. + * + * (c) 2006 Red Hat + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_jmicron" +#define DRV_VERSION "0.1.2" + +typedef enum { + PORT_PATA0 = 0, + PORT_PATA1 = 1, + PORT_SATA = 2, +} port_type; + +/** + * jmicron_pre_reset - check for 40/80 pin + * @ap: Port + * + * Perform the PATA port setup we need. + + * On the Jmicron 361/363 there is a single PATA port that can be mapped + * either as primary or secondary (or neither). We don't do any policy + * and setup here. We assume that has been done by init_one and the + * BIOS. + */ + +static int jmicron_pre_reset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 control; + u32 control5; + int port_mask = 1<< (4 * ap->port_no); + int port = ap->port_no; + port_type port_map[2]; + + /* Check if our port is enabled */ + pci_read_config_dword(pdev, 0x40, &control); + if ((control & port_mask) == 0) + return 0; + + /* There are two basic mappings. One has the two SATA ports merged + as master/slave and the secondary as PATA, the other has only the + SATA port mapped */ + if (control & (1 << 23)) { + port_map[0] = PORT_SATA; + port_map[1] = PORT_PATA0; + } else { + port_map[0] = PORT_SATA; + port_map[1] = PORT_SATA; + } + + /* The 365/366 may have this bit set to map the second PATA port + as the internal primary channel */ + pci_read_config_dword(pdev, 0x80, &control5); + if (control5 & (1<<24)) + port_map[0] = PORT_PATA1; + + /* The two ports may then be logically swapped by the firmware */ + if (control & (1 << 22)) + port = port ^ 1; + + /* + * Now we know which physical port we are talking about we can + * actually do our cable checking etc. Thankfully we don't need + * to do the plumbing for other cases. + */ + switch (port_map[port]) + { + case PORT_PATA0: + if (control & (1 << 5)) + return 0; + if (control & (1 << 3)) /* 40/80 pin primary */ + ap->cbl = ATA_CBL_PATA40; + else + ap->cbl = ATA_CBL_PATA80; + break; + case PORT_PATA1: + /* Bit 21 is set if the port is enabled */ + if ((control5 & (1 << 21)) == 0) + return 0; + if (control5 & (1 << 19)) /* 40/80 pin secondary */ + ap->cbl = ATA_CBL_PATA40; + else + ap->cbl = ATA_CBL_PATA80; + break; + case PORT_SATA: + ap->cbl = ATA_CBL_SATA; + break; + } + return ata_std_prereset(ap); +} + +/** + * jmicron_error_handler - Setup and error handler + * @ap: Port to handle + * + * LOCKING: + * None (inherited from caller). + */ + +static void jmicron_error_handler(struct ata_port *ap) +{ + return ata_bmdma_drive_eh(ap, jmicron_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/* No PIO or DMA methods needed for this device */ + +static struct scsi_host_template jmicron_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + /* Special handling needed if you have sector or LBA48 limits */ + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + /* Use standard CHS mapping rules */ + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations jmicron_ops = { + .port_disable = ata_port_disable, + + /* Task file is PCI ATA format, use helpers */ + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = jmicron_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + /* BMDMA handling is PCI ATA format, use helpers */ + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + /* Timeout handling. Special recovery hooks here */ + .eng_timeout = ata_eng_timeout, + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + /* Generic PATA PCI ATA helpers */ + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + + +/** + * jmicron_init_one - Register Jmicron ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in jmicron_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .sht = &jmicron_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, + + .port_ops = &jmicron_ops, + }; + struct ata_port_info *port_info[2] = { &info, &info }; + + u32 reg; + + if (id->driver_data != 368) { + /* Put the controller into AHCI mode in case the AHCI driver + has not yet been loaded. This can be done with either + function present */ + + /* FIXME: We may want a way to override this in future */ + pci_write_config_byte(pdev, 0x41, 0xa1); + } + + /* PATA controller is fn 1, AHCI is fn 0 */ + if (PCI_FUNC(pdev->devfn) != 1) + return -ENODEV; + + if ( id->driver_data == 365 || id->driver_data == 366) { + /* The 365/66 have two PATA channels, redirect the second */ + pci_read_config_dword(pdev, 0x80, ®); + reg |= (1 << 24); /* IDE1 to PATA IDE secondary */ + pci_write_config_dword(pdev, 0x80, reg); + } + + return ata_pci_init_one(pdev, port_info, 2); +} + +static const struct pci_device_id jmicron_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361), 361}, + { PCI_DEVICE(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363), 363}, + { PCI_DEVICE(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365), 365}, + { PCI_DEVICE(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366), 366}, + { PCI_DEVICE(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368), 368}, + { } /* terminate list */ +}; + +static struct pci_driver jmicron_pci_driver = { + .name = DRV_NAME, + .id_table = jmicron_pci_tbl, + .probe = jmicron_init_one, + .remove = ata_pci_remove_one, +}; + +static int __init jmicron_init(void) +{ + return pci_register_driver(&jmicron_pci_driver); +} + +static void __exit jmicron_exit(void) +{ + pci_unregister_driver(&jmicron_pci_driver); +} + +module_init(jmicron_init); +module_exit(jmicron_exit); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for Jmicron PATA ports"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, jmicron_pci_tbl); +MODULE_VERSION(DRV_VERSION); + diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c new file mode 100644 index 00000000000..eb510660b42 --- /dev/null +++ b/drivers/ata/pata_legacy.c @@ -0,0 +1,949 @@ +/* + * pata-legacy.c - Legacy port PATA/SATA controller driver. + * Copyright 2005/2006 Red Hat , all rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * An ATA driver for the legacy ATA ports. + * + * Data Sources: + * Opti 82C465/82C611 support: Data sheets at opti-inc.com + * HT6560 series: + * Promise 20230/20620: + * http://www.ryston.cz/petr/vlb/pdc20230b.html + * http://www.ryston.cz/petr/vlb/pdc20230c.html + * http://www.ryston.cz/petr/vlb/pdc20630.html + * + * Unsupported but docs exist: + * Appian/Adaptec AIC25VL01/Cirrus Logic PD7220 + * Winbond W83759A + * + * This driver handles legacy (that is "ISA/VLB side") IDE ports found + * on PC class systems. There are three hybrid devices that are exceptions + * The Cyrix 5510/5520 where a pre SFF ATA device is on the bridge and + * the MPIIX where the tuning is PCI side but the IDE is "ISA side". + * + * Specific support is included for the ht6560a/ht6560b/opti82c611a/ + * opti82c465mv/promise 20230c/20630 + * + * Use the autospeed and pio_mask options with: + * Appian ADI/2 aka CLPD7220 or AIC25VL01. + * Use the jumpers, autospeed and set pio_mask to the mode on the jumpers with + * Goldstar GM82C711, PIC-1288A-125, UMC 82C871F, Winbond W83759, + * Winbond W83759A, Promise PDC20230-B + * + * For now use autospeed and pio_mask as above with the W83759A. This may + * change. + * + * TODO + * Merge existing pata_qdi driver + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_legacy" +#define DRV_VERSION "0.5.3" + +#define NR_HOST 6 + +static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 }; +static int legacy_irq[NR_HOST] = { 15, 14, 11, 10, 8, 12 }; + +struct legacy_data { + unsigned long timing; + u8 clock[2]; + u8 last; + int fast; + struct platform_device *platform_dev; + +}; + +static struct legacy_data legacy_data[NR_HOST]; +static struct ata_host *legacy_host[NR_HOST]; +static int nr_legacy_host; + + +static int probe_all; /* Set to check all ISA port ranges */ +static int ht6560a; /* HT 6560A on primary 1, secondary 2, both 3 */ +static int ht6560b; /* HT 6560A on primary 1, secondary 2, both 3 */ +static int opti82c611a; /* Opti82c611A on primary 1, secondary 2, both 3 */ +static int opti82c46x; /* Opti 82c465MV present (pri/sec autodetect) */ +static int autospeed; /* Chip present which snoops speed changes */ +static int pio_mask = 0x1F; /* PIO range for autospeed devices */ + +/** + * legacy_set_mode - mode setting + * @ap: IDE interface + * + * Use a non standard set_mode function. We don't want to be tuned. + * + * The BIOS configured everything. Our job is not to fiddle. Just use + * whatever PIO the hardware is using and leave it at that. When we + * get some kind of nice user driven API for control then we can + * expand on this as per hdparm in the base kernel. + */ + +static void legacy_set_mode(struct ata_port *ap) +{ + int i; + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + if (ata_dev_enabled(dev)) { + dev->pio_mode = XFER_PIO_0; + dev->xfer_mode = XFER_PIO_0; + dev->xfer_shift = ATA_SHIFT_PIO; + dev->flags |= ATA_DFLAG_PIO; + } + } +} + +static struct scsi_host_template legacy_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +/* + * These ops are used if the user indicates the hardware + * snoops the commands to decide on the mode and handles the + * mode selection "magically" itself. Several legacy controllers + * do this. The mode range can be set if it is not 0x1F by setting + * pio_mask as well. + */ + +static struct ata_port_operations simple_port_ops = { + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer_noirq, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations legacy_port_ops = { + .set_mode = legacy_set_mode, + + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .error_handler = ata_bmdma_error_handler, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer_noirq, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Promise 20230C and 20620 support + * + * This controller supports PIO0 to PIO2. We set PIO timings conservatively to + * allow for 50MHz Vesa Local Bus. The 20620 DMA support is weird being DMA to + * controller and PIO'd to the host and not supported. + */ + +static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + int tries = 5; + int pio = adev->pio_mode - XFER_PIO_0; + u8 rt; + unsigned long flags; + + /* Safe as UP only. Force I/Os to occur together */ + + local_irq_save(flags); + + /* Unlock the control interface */ + do + { + inb(0x1F5); + outb(inb(0x1F2) | 0x80, 0x1F2); + inb(0x1F2); + inb(0x3F6); + inb(0x3F6); + inb(0x1F2); + inb(0x1F2); + } + while((inb(0x1F2) & 0x80) && --tries); + + local_irq_restore(flags); + + outb(inb(0x1F4) & 0x07, 0x1F4); + + rt = inb(0x1F3); + rt &= 0x07 << (3 * adev->devno); + if (pio) + rt |= (1 + 3 * pio) << (3 * adev->devno); + + udelay(100); + outb(inb(0x1F2) | 0x01, 0x1F2); + udelay(100); + inb(0x1F5); + +} + +static void pdc_data_xfer_vlb(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data) +{ + struct ata_port *ap = adev->ap; + int slop = buflen & 3; + unsigned long flags; + + if (ata_id_has_dword_io(adev->id)) { + local_irq_save(flags); + + /* Perform the 32bit I/O synchronization sequence */ + inb(ap->ioaddr.nsect_addr); + inb(ap->ioaddr.nsect_addr); + inb(ap->ioaddr.nsect_addr); + + /* Now the data */ + + if (write_data) + outsl(ap->ioaddr.data_addr, buf, buflen >> 2); + else + insl(ap->ioaddr.data_addr, buf, buflen >> 2); + + if (unlikely(slop)) { + u32 pad; + if (write_data) { + memcpy(&pad, buf + buflen - slop, slop); + outl(le32_to_cpu(pad), ap->ioaddr.data_addr); + } else { + pad = cpu_to_le16(inl(ap->ioaddr.data_addr)); + memcpy(buf + buflen - slop, &pad, slop); + } + } + local_irq_restore(flags); + } + else + ata_pio_data_xfer_noirq(adev, buf, buflen, write_data); +} + +static struct ata_port_operations pdc20230_port_ops = { + .set_piomode = pdc20230_set_piomode, + + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .error_handler = ata_bmdma_error_handler, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = pdc_data_xfer_vlb, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Holtek 6560A support + * + * This controller supports PIO0 to PIO2 (no IORDY even though higher timings + * can be loaded). + */ + +static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + u8 active, recover; + struct ata_timing t; + + /* Get the timing data in cycles. For now play safe at 50Mhz */ + ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000); + + active = FIT(t.active, 2, 15); + recover = FIT(t.recover, 4, 15); + + inb(0x3E6); + inb(0x3E6); + inb(0x3E6); + inb(0x3E6); + + outb(recover << 4 | active, ap->ioaddr.device_addr); + inb(ap->ioaddr.status_addr); +} + +static struct ata_port_operations ht6560a_port_ops = { + .set_piomode = ht6560a_set_piomode, + + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .error_handler = ata_bmdma_error_handler, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, /* Check vlb/noirq */ + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Holtek 6560B support + * + * This controller supports PIO0 to PIO4. We honour the BIOS/jumper FIFO setting + * unless we see an ATAPI device in which case we force it off. + * + * FIXME: need to implement 2nd channel support. + */ + +static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + u8 active, recover; + struct ata_timing t; + + /* Get the timing data in cycles. For now play safe at 50Mhz */ + ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000); + + active = FIT(t.active, 2, 15); + recover = FIT(t.recover, 2, 16); + recover &= 0x15; + + inb(0x3E6); + inb(0x3E6); + inb(0x3E6); + inb(0x3E6); + + outb(recover << 4 | active, ap->ioaddr.device_addr); + + if (adev->class != ATA_DEV_ATA) { + u8 rconf = inb(0x3E6); + if (rconf & 0x24) { + rconf &= ~ 0x24; + outb(rconf, 0x3E6); + } + } + inb(ap->ioaddr.status_addr); +} + +static struct ata_port_operations ht6560b_port_ops = { + .set_piomode = ht6560b_set_piomode, + + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .error_handler = ata_bmdma_error_handler, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, /* FIXME: Check 32bit and noirq */ + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Opti core chipset helpers + */ + +/** + * opti_syscfg - read OPTI chipset configuration + * @reg: Configuration register to read + * + * Returns the value of an OPTI system board configuration register. + */ + +static u8 opti_syscfg(u8 reg) +{ + unsigned long flags; + u8 r; + + /* Uniprocessor chipset and must force cycles adjancent */ + local_irq_save(flags); + outb(reg, 0x22); + r = inb(0x24); + local_irq_restore(flags); + return r; +} + +/* + * Opti 82C611A + * + * This controller supports PIO0 to PIO3. + */ + +static void opti82c611a_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + u8 active, recover, setup; + struct ata_timing t; + struct ata_device *pair = ata_dev_pair(adev); + int clock; + int khz[4] = { 50000, 40000, 33000, 25000 }; + u8 rc; + + /* Enter configuration mode */ + inw(ap->ioaddr.error_addr); + inw(ap->ioaddr.error_addr); + outb(3, ap->ioaddr.nsect_addr); + + /* Read VLB clock strapping */ + clock = 1000000000 / khz[inb(ap->ioaddr.lbah_addr) & 0x03]; + + /* Get the timing data in cycles */ + ata_timing_compute(adev, adev->pio_mode, &t, clock, 1000); + + /* Setup timing is shared */ + if (pair) { + struct ata_timing tp; + ata_timing_compute(pair, pair->pio_mode, &tp, clock, 1000); + + ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP); + } + + active = FIT(t.active, 2, 17) - 2; + recover = FIT(t.recover, 1, 16) - 1; + setup = FIT(t.setup, 1, 4) - 1; + + /* Select the right timing bank for write timing */ + rc = inb(ap->ioaddr.lbal_addr); + rc &= 0x7F; + rc |= (adev->devno << 7); + outb(rc, ap->ioaddr.lbal_addr); + + /* Write the timings */ + outb(active << 4 | recover, ap->ioaddr.error_addr); + + /* Select the right bank for read timings, also + load the shared timings for address */ + rc = inb(ap->ioaddr.device_addr); + rc &= 0xC0; + rc |= adev->devno; /* Index select */ + rc |= (setup << 4) | 0x04; + outb(rc, ap->ioaddr.device_addr); + + /* Load the read timings */ + outb(active << 4 | recover, ap->ioaddr.data_addr); + + /* Ensure the timing register mode is right */ + rc = inb (ap->ioaddr.lbal_addr); + rc &= 0x73; + rc |= 0x84; + outb(rc, ap->ioaddr.lbal_addr); + + /* Exit command mode */ + outb(0x83, ap->ioaddr.nsect_addr); +} + + +static struct ata_port_operations opti82c611a_port_ops = { + .set_piomode = opti82c611a_set_piomode, + + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .error_handler = ata_bmdma_error_handler, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Opti 82C465MV + * + * This controller supports PIO0 to PIO3. Unlike the 611A the MVB + * version is dual channel but doesn't have a lot of unique registers. + */ + +static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + u8 active, recover, setup; + struct ata_timing t; + struct ata_device *pair = ata_dev_pair(adev); + int clock; + int khz[4] = { 50000, 40000, 33000, 25000 }; + u8 rc; + u8 sysclk; + + /* Get the clock */ + sysclk = opti_syscfg(0xAC) & 0xC0; /* BIOS set */ + + /* Enter configuration mode */ + inw(ap->ioaddr.error_addr); + inw(ap->ioaddr.error_addr); + outb(3, ap->ioaddr.nsect_addr); + + /* Read VLB clock strapping */ + clock = 1000000000 / khz[sysclk]; + + /* Get the timing data in cycles */ + ata_timing_compute(adev, adev->pio_mode, &t, clock, 1000); + + /* Setup timing is shared */ + if (pair) { + struct ata_timing tp; + ata_timing_compute(pair, pair->pio_mode, &tp, clock, 1000); + + ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP); + } + + active = FIT(t.active, 2, 17) - 2; + recover = FIT(t.recover, 1, 16) - 1; + setup = FIT(t.setup, 1, 4) - 1; + + /* Select the right timing bank for write timing */ + rc = inb(ap->ioaddr.lbal_addr); + rc &= 0x7F; + rc |= (adev->devno << 7); + outb(rc, ap->ioaddr.lbal_addr); + + /* Write the timings */ + outb(active << 4 | recover, ap->ioaddr.error_addr); + + /* Select the right bank for read timings, also + load the shared timings for address */ + rc = inb(ap->ioaddr.device_addr); + rc &= 0xC0; + rc |= adev->devno; /* Index select */ + rc |= (setup << 4) | 0x04; + outb(rc, ap->ioaddr.device_addr); + + /* Load the read timings */ + outb(active << 4 | recover, ap->ioaddr.data_addr); + + /* Ensure the timing register mode is right */ + rc = inb (ap->ioaddr.lbal_addr); + rc &= 0x73; + rc |= 0x84; + outb(rc, ap->ioaddr.lbal_addr); + + /* Exit command mode */ + outb(0x83, ap->ioaddr.nsect_addr); + + /* We need to know this for quad device on the MVB */ + ap->host->private_data = ap; +} + +/** + * opt82c465mv_qc_issue_prot - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings. The + * MVB has a single set of timing registers and these are shared + * across channels. As there are two registers we really ought to + * track the last two used values as a sort of register window. For + * now we just reload on a channel switch. On the single channel + * setup this condition never fires so we do nothing extra. + * + * FIXME: dual channel needs ->serialize support + */ + +static unsigned int opti82c46x_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + + /* If timings are set and for the wrong channel (2nd test is + due to a libata shortcoming and will eventually go I hope) */ + if (ap->host->private_data != ap->host + && ap->host->private_data != NULL) + opti82c46x_set_piomode(ap, adev); + + return ata_qc_issue_prot(qc); +} + +static struct ata_port_operations opti82c46x_port_ops = { + .set_piomode = opti82c46x_set_piomode, + + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .error_handler = ata_bmdma_error_handler, + + .qc_prep = ata_qc_prep, + .qc_issue = opti82c46x_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + + +/** + * legacy_init_one - attach a legacy interface + * @port: port number + * @io: I/O port start + * @ctrl: control port + * @irq: interrupt line + * + * Register an ISA bus IDE interface. Such interfaces are PIO and we + * assume do not support IRQ sharing. + */ + +static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl, int irq) +{ + struct legacy_data *ld = &legacy_data[nr_legacy_host]; + struct ata_probe_ent ae; + struct platform_device *pdev; + int ret = -EBUSY; + struct ata_port_operations *ops = &legacy_port_ops; + int pio_modes = pio_mask; + u32 mask = (1 << port); + + if (request_region(io, 8, "pata_legacy") == NULL) + return -EBUSY; + if (request_region(ctrl, 1, "pata_legacy") == NULL) + goto fail_io; + + pdev = platform_device_register_simple(DRV_NAME, nr_legacy_host, NULL, 0); + if (pdev == NULL) + goto fail_dev; + + if (ht6560a & mask) { + ops = &ht6560a_port_ops; + pio_modes = 0x07; + } + if (ht6560b & mask) { + ops = &ht6560b_port_ops; + pio_modes = 0x1F; + } + if (opti82c611a & mask) { + ops = &opti82c611a_port_ops; + pio_modes = 0x0F; + } + if (opti82c46x & mask) { + ops = &opti82c46x_port_ops; + pio_modes = 0x0F; + } + + /* Probe for automatically detectable controllers */ + + if (io == 0x1F0 && ops == &legacy_port_ops) { + unsigned long flags; + + local_irq_save(flags); + + /* Probes */ + inb(0x1F5); + outb(inb(0x1F2) | 0x80, 0x1F2); + inb(0x1F2); + inb(0x3F6); + inb(0x3F6); + inb(0x1F2); + inb(0x1F2); + + if ((inb(0x1F2) & 0x80) == 0) { + /* PDC20230c or 20630 ? */ + printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller detected.\n"); + pio_modes = 0x07; + ops = &pdc20230_port_ops; + udelay(100); + inb(0x1F5); + } else { + outb(0x55, 0x1F2); + inb(0x1F2); + inb(0x1F2); + if (inb(0x1F2) == 0x00) { + printk(KERN_INFO "PDC20230-B VLB ATA controller detected.\n"); + } + } + local_irq_restore(flags); + } + + + /* Chip does mode setting by command snooping */ + if (ops == &legacy_port_ops && (autospeed & mask)) + ops = &simple_port_ops; + memset(&ae, 0, sizeof(struct ata_probe_ent)); + INIT_LIST_HEAD(&ae.node); + ae.dev = &pdev->dev; + ae.port_ops = ops; + ae.sht = &legacy_sht; + ae.n_ports = 1; + ae.pio_mask = pio_modes; + ae.irq = irq; + ae.irq_flags = 0; + ae.port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST; + ae.port[0].cmd_addr = io; + ae.port[0].altstatus_addr = ctrl; + ae.port[0].ctl_addr = ctrl; + ata_std_ports(&ae.port[0]); + ae.private_data = ld; + + ret = ata_device_add(&ae); + if (ret == 0) { + ret = -ENODEV; + goto fail; + } + legacy_host[nr_legacy_host++] = dev_get_drvdata(&pdev->dev); + ld->platform_dev = pdev; + return 0; + +fail: + platform_device_unregister(pdev); +fail_dev: + release_region(ctrl, 1); +fail_io: + release_region(io, 8); + return ret; +} + +/** + * legacy_check_special_cases - ATA special cases + * @p: PCI device to check + * @master: set this if we find an ATA master + * @master: set this if we find an ATA secondary + * + * A small number of vendors implemented early PCI ATA interfaces on bridge logic + * without the ATA interface being PCI visible. Where we have a matching PCI driver + * we must skip the relevant device here. If we don't know about it then the legacy + * driver is the right driver anyway. + */ + +static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *secondary) +{ + /* Cyrix CS5510 pre SFF MWDMA ATA on the bridge */ + if (p->vendor == 0x1078 && p->device == 0x0000) { + *primary = *secondary = 1; + return; + } + /* Cyrix CS5520 pre SFF MWDMA ATA on the bridge */ + if (p->vendor == 0x1078 && p->device == 0x0002) { + *primary = *secondary = 1; + return; + } + /* Intel MPIIX - PIO ATA on non PCI side of bridge */ + if (p->vendor == 0x8086 && p->device == 0x1234) { + u16 r; + pci_read_config_word(p, 0x6C, &r); + if (r & 0x8000) { /* ATA port enabled */ + if (r & 0x4000) + *secondary = 1; + else + *primary = 1; + } + return; + } +} + + +/** + * legacy_init - attach legacy interfaces + * + * Attach legacy IDE interfaces by scanning the usual IRQ/port suspects. + * Right now we do not scan the ide0 and ide1 address but should do so + * for non PCI systems or systems with no PCI IDE legacy mode devices. + * If you fix that note there are special cases to consider like VLB + * drivers and CS5510/20. + */ + +static __init int legacy_init(void) +{ + int i; + int ct = 0; + int primary = 0; + int secondary = 0; + int last_port = NR_HOST; + + struct pci_dev *p = NULL; + + for_each_pci_dev(p) { + int r; + /* Check for any overlap of the system ATA mappings. Native mode controllers + stuck on these addresses or some devices in 'raid' mode won't be found by + the storage class test */ + for (r = 0; r < 6; r++) { + if (pci_resource_start(p, r) == 0x1f0) + primary = 1; + if (pci_resource_start(p, r) == 0x170) + secondary = 1; + } + /* Check for special cases */ + legacy_check_special_cases(p, &primary, &secondary); + + /* If PCI bus is present then don't probe for tertiary legacy ports */ + if (probe_all == 0) + last_port = 2; + } + + /* If an OPTI 82C46X is present find out where the channels are */ + if (opti82c46x) { + static const char *optis[4] = { + "3/463MV", "5MV", + "5MVA", "5MVB" + }; + u8 chans = 1; + u8 ctrl = (opti_syscfg(0x30) & 0xC0) >> 6; + + opti82c46x = 3; /* Assume master and slave first */ + printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n", optis[ctrl]); + if (ctrl == 3) + chans = (opti_syscfg(0x3F) & 0x20) ? 2 : 1; + ctrl = opti_syscfg(0xAC); + /* Check enabled and this port is the 465MV port. On the + MVB we may have two channels */ + if (ctrl & 8) { + if (ctrl & 4) + opti82c46x = 2; /* Slave */ + else + opti82c46x = 1; /* Master */ + if (chans == 2) + opti82c46x = 3; /* Master and Slave */ + } /* Slave only */ + else if (chans == 1) + opti82c46x = 1; + } + + for (i = 0; i < last_port; i++) { + /* Skip primary if we have seen a PCI one */ + if (i == 0 && primary == 1) + continue; + /* Skip secondary if we have seen a PCI one */ + if (i == 1 && secondary == 1) + continue; + if (legacy_init_one(i, legacy_port[i], + legacy_port[i] + 0x0206, + legacy_irq[i]) == 0) + ct++; + } + if (ct != 0) + return 0; + return -ENODEV; +} + +static __exit void legacy_exit(void) +{ + int i; + + for (i = 0; i < nr_legacy_host; i++) { + struct legacy_data *ld = &legacy_data[i]; + struct ata_port *ap =legacy_host[i]->ports[0]; + unsigned long io = ap->ioaddr.cmd_addr; + unsigned long ctrl = ap->ioaddr.ctl_addr; + ata_host_remove(legacy_host[i]); + platform_device_unregister(ld->platform_dev); + if (ld->timing) + release_region(ld->timing, 2); + release_region(io, 8); + release_region(ctrl, 1); + } +} + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for legacy ATA"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +module_param(probe_all, int, 0); +module_param(autospeed, int, 0); +module_param(ht6560a, int, 0); +module_param(ht6560b, int, 0); +module_param(opti82c611a, int, 0); +module_param(opti82c46x, int, 0); +module_param(pio_mask, int, 0); + +module_init(legacy_init); +module_exit(legacy_exit); + diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c new file mode 100644 index 00000000000..1958c4ed09a --- /dev/null +++ b/drivers/ata/pata_mpiix.c @@ -0,0 +1,313 @@ +/* + * pata_mpiix.c - Intel MPIIX PATA for new ATA layer + * (C) 2005-2006 Red Hat Inc + * Alan Cox + * + * The MPIIX is different enough to the PIIX4 and friends that we give it + * a separate driver. The old ide/pci code handles this by just not tuning + * MPIIX at all. + * + * The MPIIX also differs in another important way from the majority of PIIX + * devices. The chip is a bridge (pardon the pun) between the old world of + * ISA IDE and PCI IDE. Although the ATA timings are PCI configured the actual + * IDE controller is not decoded in PCI space and the chip does not claim to + * be IDE class PCI. This requires slightly non-standard probe logic compared + * with PCI IDE and also that we do not disable the device when our driver is + * unloaded (as it has many other functions). + * + * The driver conciously keeps this logic internally to avoid pushing quirky + * PATA history into the clean libata layer. + * + * Thinkpad specific note: If you boot an MPIIX using thinkpad with a PCMCIA + * hard disk present this driver will not detect it. This is not a bug. In this + * configuration the secondary port of the MPIIX is disabled and the addresses + * are decoded by the PCMCIA bridge and therefore are for a generic IDE driver + * to operate. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_mpiix" +#define DRV_VERSION "0.7.1" + +enum { + IDETIM = 0x6C, /* IDE control register */ + IORDY = (1 << 1), + PPE = (1 << 2), + FTIM = (1 << 0), + ENABLED = (1 << 15), + SECONDARY = (1 << 14) +}; + +static int mpiix_pre_reset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const struct pci_bits mpiix_enable_bits[] = { + { 0x6D, 1, 0x80, 0x80 }, + { 0x6F, 1, 0x80, 0x80 } + }; + + if (!pci_test_config_bits(pdev, &mpiix_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +/** + * mpiix_error_handler - probe reset + * @ap: ATA port + * + * Perform the ATA probe and bus reset sequence plus specific handling + * for this hardware. The MPIIX has the enable bits in a different place + * to PIIX4 and friends. As a pure PIO device it has no cable detect + */ + +static void mpiix_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, mpiix_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * mpiix_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. The MPIIX allows us to program the + * IORDY sample point (2-5 clocks), recovery 1-4 clocks and whether + * prefetching or iordy are used. + * + * This would get very ugly because we can only program timing for one + * device at a time, the other gets PIO0. Fortunately libata calls + * our qc_issue_prot command before a command is issued so we can + * flip the timings back and forth to reduce the pain. + */ + +static void mpiix_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + int control = 0; + int pio = adev->pio_mode - XFER_PIO_0; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u16 idetim; + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + pci_read_config_word(pdev, IDETIM, &idetim); + /* Mask the IORDY/TIME/PPE0 bank for this device */ + if (adev->class == ATA_DEV_ATA) + control |= PPE; /* PPE enable for disk */ + if (ata_pio_need_iordy(adev)) + control |= IORDY; /* IORDY */ + if (pio > 0) + control |= FTIM; /* This drive is on the fast timing bank */ + + /* Mask out timing and clear both TIME bank selects */ + idetim &= 0xCCEE; + idetim &= ~(0x07 << (2 * adev->devno)); + idetim |= (control << (2 * adev->devno)); + + idetim |= (timings[pio][0] << 12) | (timings[pio][1] << 8); + pci_write_config_word(pdev, IDETIM, idetim); + + /* We use ap->private_data as a pointer to the device currently + loaded for timing */ + ap->private_data = adev; +} + +/** + * mpiix_qc_issue_prot - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings if + * neccessary. Our logic also clears TIME0/TIME1 for the other device so + * that, even if we get this wrong, cycles to the other device will + * be made PIO0. + */ + +static unsigned int mpiix_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + + /* If modes have been configured and the channel data is not loaded + then load it. We have to check if pio_mode is set as the core code + does not set adev->pio_mode to XFER_PIO_0 while probing as would be + logical */ + + if (adev->pio_mode && adev != ap->private_data) + mpiix_set_piomode(ap, adev); + + return ata_qc_issue_prot(qc); +} + +static struct scsi_host_template mpiix_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations mpiix_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = mpiix_set_piomode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = mpiix_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .qc_prep = ata_qc_prep, + .qc_issue = mpiix_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + /* Single threaded by the PCI probe logic */ + static struct ata_probe_ent probe[2]; + static int printed_version; + u16 idetim; + int enabled; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n"); + + /* MPIIX has many functions which can be turned on or off according + to other devices present. Make sure IDE is enabled before we try + and use it */ + + pci_read_config_word(dev, IDETIM, &idetim); + if (!(idetim & ENABLED)) + return -ENODEV; + + /* We do our own plumbing to avoid leaking special cases for whacko + ancient hardware into the core code. There are two issues to + worry about. #1 The chip is a bridge so if in legacy mode and + without BARs set fools the setup. #2 If you pci_disable_device + the MPIIX your box goes castors up */ + + INIT_LIST_HEAD(&probe[0].node); + probe[0].dev = pci_dev_to_dev(dev); + probe[0].port_ops = &mpiix_port_ops; + probe[0].sht = &mpiix_sht; + probe[0].pio_mask = 0x1F; + probe[0].irq = 14; + probe[0].irq_flags = SA_SHIRQ; + probe[0].port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST; + probe[0].n_ports = 1; + probe[0].port[0].cmd_addr = 0x1F0; + probe[0].port[0].ctl_addr = 0x3F6; + probe[0].port[0].altstatus_addr = 0x3F6; + + /* The secondary lurks at different addresses but is otherwise + the same beastie */ + + INIT_LIST_HEAD(&probe[1].node); + probe[1] = probe[0]; + probe[1].irq = 15; + probe[1].port[0].cmd_addr = 0x170; + probe[1].port[0].ctl_addr = 0x376; + probe[1].port[0].altstatus_addr = 0x376; + + /* Let libata fill in the port details */ + ata_std_ports(&probe[0].port[0]); + ata_std_ports(&probe[1].port[0]); + + /* Now add the port that is active */ + enabled = (idetim & SECONDARY) ? 1 : 0; + + if (ata_device_add(&probe[enabled])) + return 0; + return -ENODEV; +} + +/** + * mpiix_remove_one - device unload + * @pdev: PCI device being removed + * + * Handle an unplug/unload event for a PCI device. Unload the + * PCI driver but do not use the default handler as we *MUST NOT* + * disable the device as it has other functions. + */ + +static void __devexit mpiix_remove_one(struct pci_dev *pdev) +{ + struct device *dev = pci_dev_to_dev(pdev); + struct ata_host *host = dev_get_drvdata(dev); + + ata_host_remove(host); + dev_set_drvdata(dev, NULL); +} + + + +static const struct pci_device_id mpiix[] = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371MX), }, + { 0, }, +}; + +static struct pci_driver mpiix_pci_driver = { + .name = DRV_NAME, + .id_table = mpiix, + .probe = mpiix_init_one, + .remove = mpiix_remove_one +}; + +static int __init mpiix_init(void) +{ + return pci_register_driver(&mpiix_pci_driver); +} + + +static void __exit mpiix_exit(void) +{ + pci_unregister_driver(&mpiix_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Intel MPIIX"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, mpiix); +MODULE_VERSION(DRV_VERSION); + +module_init(mpiix_init); +module_exit(mpiix_exit); diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c new file mode 100644 index 00000000000..e3a85778cd4 --- /dev/null +++ b/drivers/ata/pata_netcell.c @@ -0,0 +1,175 @@ +/* + * pata_netcell.c - Netcell PATA driver + * + * (c) 2006 Red Hat + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_netcell" +#define DRV_VERSION "0.1.5" + +/** + * netcell_probe_init - check for 40/80 pin + * @ap: Port + * + * Cables are handled by the RAID controller. Report 80 pin. + */ + +static int netcell_pre_reset(struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA80; + return ata_std_prereset(ap); +} + +/** + * netcell_probe_reset - Probe specified port on PATA host controller + * @ap: Port to probe + * + * LOCKING: + * None (inherited from caller). + */ + +static void netcell_error_handler(struct ata_port *ap) +{ + return ata_bmdma_drive_eh(ap, netcell_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/* No PIO or DMA methods needed for this device */ + +static struct scsi_host_template netcell_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + /* Special handling needed if you have sector or LBA48 limits */ + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + /* Use standard CHS mapping rules */ + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations netcell_ops = { + .port_disable = ata_port_disable, + + /* Task file is PCI ATA format, use helpers */ + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = netcell_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + /* BMDMA handling is PCI ATA format, use helpers */ + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + /* Timeout handling. Special recovery hooks here */ + .eng_timeout = ata_eng_timeout, + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + /* Generic PATA PCI ATA helpers */ + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + + +/** + * netcell_init_one - Register Netcell ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in netcell_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + static struct ata_port_info info = { + .sht = &netcell_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + /* Actually we don't really care about these as the + firmware deals with it */ + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* UDMA 133 */ + .port_ops = &netcell_ops, + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, + "version " DRV_VERSION "\n"); + + /* Any chip specific setup/optimisation/messages here */ + ata_pci_clear_simplex(pdev); + + /* And let the library code do the work */ + return ata_pci_init_one(pdev, port_info, 2); +} + +static const struct pci_device_id netcell_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_NETCELL, PCI_DEVICE_ID_REVOLUTION), }, + { } /* terminate list */ +}; + +static struct pci_driver netcell_pci_driver = { + .name = DRV_NAME, + .id_table = netcell_pci_tbl, + .probe = netcell_init_one, + .remove = ata_pci_remove_one, +}; + +static int __init netcell_init(void) +{ + return pci_register_driver(&netcell_pci_driver); +} + +static void __exit netcell_exit(void) +{ + pci_unregister_driver(&netcell_pci_driver); +} + +module_init(netcell_init); +module_exit(netcell_exit); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for Netcell PATA RAID"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, netcell_pci_tbl); +MODULE_VERSION(DRV_VERSION); + diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c new file mode 100644 index 00000000000..93d6646d295 --- /dev/null +++ b/drivers/ata/pata_ns87410.c @@ -0,0 +1,236 @@ +/* + * pata_ns87410.c - National Semiconductor 87410 PATA for new ATA layer + * (C) 2006 Red Hat Inc + * Alan Cox + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_ns87410" +#define DRV_VERSION "0.4.2" + +/** + * ns87410_pre_reset - probe begin + * @ap: ATA port + * + * Set up cable type and use generic probe init + */ + +static int ns87410_pre_reset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const struct pci_bits ns87410_enable_bits[] = { + { 0x43, 1, 0x08, 0x08 }, + { 0x47, 1, 0x08, 0x08 } + }; + + if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +/** + * ns87410_error_handler - probe reset + * @ap: ATA port + * + * Perform the ATA probe and bus reset sequence plus specific handling + * for this hardware. The MPIIX has the enable bits in a different place + * to PIIX4 and friends. As a pure PIO device it has no cable detect + */ + +static void ns87410_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, ns87410_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * ns87410_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program timing data. This is kept per channel not per device, + * and only affects the data port. + */ + +static void ns87410_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = 0x40 + 4 * ap->port_no; + u8 idetcr, idefr; + struct ata_timing at; + + static const u8 activebits[15] = { + 0, 1, 2, 3, 4, + 5, 5, 6, 6, 6, + 6, 7, 7, 7, 7 + }; + + static const u8 recoverbits[12] = { + 0, 1, 2, 3, 4, 5, 6, 6, 7, 7, 7, 7 + }; + + pci_read_config_byte(pdev, port + 3, &idefr); + + if (ata_pio_need_iordy(adev)) + idefr |= 0x04; /* IORDY enable */ + else + idefr &= ~0x04; + + if (ata_timing_compute(adev, adev->pio_mode, &at, 30303, 1) < 0) { + dev_printk(KERN_ERR, &pdev->dev, "unknown mode %d.\n", adev->pio_mode); + return; + } + + at.active = FIT(at.active, 2, 16) - 2; + at.setup = FIT(at.setup, 1, 4) - 1; + at.recover = FIT(at.recover, 1, 12) - 1; + + idetcr = (at.setup << 6) | (recoverbits[at.recover] << 3) | activebits[at.active]; + + pci_write_config_byte(pdev, port, idetcr); + pci_write_config_byte(pdev, port + 3, idefr); + /* We use ap->private_data as a pointer to the device currently + loaded for timing */ + ap->private_data = adev; +} + +/** + * ns87410_qc_issue_prot - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings if + * neccessary. + */ + +static unsigned int ns87410_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + + /* If modes have been configured and the channel data is not loaded + then load it. We have to check if pio_mode is set as the core code + does not set adev->pio_mode to XFER_PIO_0 while probing as would be + logical */ + + if (adev->pio_mode && adev != ap->private_data) + ns87410_set_piomode(ap, adev); + + return ata_qc_issue_prot(qc); +} + +static struct scsi_host_template ns87410_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations ns87410_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = ns87410_set_piomode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ns87410_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .qc_prep = ata_qc_prep, + .qc_issue = ns87410_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .sht = &ns87410_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x0F, + .port_ops = &ns87410_port_ops + }; + static struct ata_port_info *port_info[2] = {&info, &info}; + return ata_pci_init_one(dev, port_info, 2); +} + +static const struct pci_device_id ns87410[] = { + { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87410), }, + { 0, }, +}; + +static struct pci_driver ns87410_pci_driver = { + .name = DRV_NAME, + .id_table = ns87410, + .probe = ns87410_init_one, + .remove = ata_pci_remove_one +}; + +static int __init ns87410_init(void) +{ + return pci_register_driver(&ns87410_pci_driver); +} + + +static void __exit ns87410_exit(void) +{ + pci_unregister_driver(&ns87410_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Nat Semi 87410"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, ns87410); +MODULE_VERSION(DRV_VERSION); + +module_init(ns87410_init); +module_exit(ns87410_exit); diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c new file mode 100644 index 00000000000..04c618a2664 --- /dev/null +++ b/drivers/ata/pata_oldpiix.c @@ -0,0 +1,339 @@ +/* + * pata_oldpiix.c - Intel PATA/SATA controllers + * + * (C) 2005 Red Hat + * + * Some parts based on ata_piix.c by Jeff Garzik and others. + * + * Early PIIX differs significantly from the later PIIX as it lacks + * SITRE and the slave timing registers. This means that you have to + * set timing per channel, or be clever. Libata tells us whenever it + * does drive selection and we use this to reload the timings. + * + * Because of these behaviour differences PIIX gets its own driver module. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_oldpiix" +#define DRV_VERSION "0.5.1" + +/** + * oldpiix_pre_reset - probe begin + * @ap: ATA port + * + * Set up cable type and use generic probe init + */ + +static int oldpiix_pre_reset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const struct pci_bits oldpiix_enable_bits[] = { + { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */ + { 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */ + }; + + if (!pci_test_config_bits(pdev, &oldpiix_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +/** + * oldpiix_pata_error_handler - Probe specified port on PATA host controller + * @ap: Port to probe + * @classes: + * + * LOCKING: + * None (inherited from caller). + */ + +static void oldpiix_pata_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, oldpiix_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * oldpiix_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: um + * + * Set PIO mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void oldpiix_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + struct pci_dev *dev = to_pci_dev(ap->host->dev); + unsigned int idetm_port= ap->port_no ? 0x42 : 0x40; + u16 idetm_data; + int control = 0; + + /* + * See Intel Document 298600-004 for the timing programing rules + * for PIIX/ICH. Note that the early PIIX does not have the slave + * timing port at 0x44. + */ + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + if (pio > 2) + control |= 1; /* TIME1 enable */ + if (ata_pio_need_iordy(adev)) + control |= 2; /* IE IORDY */ + + /* Intel specifies that the PPE functionality is for disk only */ + if (adev->class == ATA_DEV_ATA) + control |= 4; /* PPE enable */ + + pci_read_config_word(dev, idetm_port, &idetm_data); + + /* Enable PPE, IE and TIME as appropriate. Clear the other + drive timing bits */ + if (adev->devno == 0) { + idetm_data &= 0xCCE0; + idetm_data |= control; + } else { + idetm_data &= 0xCC0E; + idetm_data |= (control << 4); + } + idetm_data |= (timings[pio][0] << 12) | + (timings[pio][1] << 8); + pci_write_config_word(dev, idetm_port, idetm_data); + + /* Track which port is configured */ + ap->private_data = adev; +} + +/** + * oldpiix_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * @isich: True if the device is an ICH and has IOCFG registers + * + * Set MWDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void oldpiix_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *dev = to_pci_dev(ap->host->dev); + u8 idetm_port = ap->port_no ? 0x42 : 0x40; + u16 idetm_data; + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + /* + * MWDMA is driven by the PIO timings. We must also enable + * IORDY unconditionally along with TIME1. PPE has already + * been set when the PIO timing was set. + */ + + unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0; + unsigned int control; + const unsigned int needed_pio[3] = { + XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 + }; + int pio = needed_pio[mwdma] - XFER_PIO_0; + + pci_read_config_word(dev, idetm_port, &idetm_data); + + control = 3; /* IORDY|TIME0 */ + /* Intel specifies that the PPE functionality is for disk only */ + if (adev->class == ATA_DEV_ATA) + control |= 4; /* PPE enable */ + + /* If the drive MWDMA is faster than it can do PIO then + we must force PIO into PIO0 */ + + if (adev->pio_mode < needed_pio[mwdma]) + /* Enable DMA timing only */ + control |= 8; /* PIO cycles in PIO0 */ + + /* Mask out the relevant control and timing bits we will load. Also + clear the other drive TIME register as a precaution */ + if (adev->devno == 0) { + idetm_data &= 0xCCE0; + idetm_data |= control; + } else { + idetm_data &= 0xCC0E; + idetm_data |= (control << 4); + } + idetm_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8); + pci_write_config_word(dev, idetm_port, idetm_data); + + /* Track which port is configured */ + ap->private_data = adev; +} + +/** + * oldpiix_qc_issue_prot - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings if + * neccessary. Our logic also clears TIME0/TIME1 for the other device so + * that, even if we get this wrong, cycles to the other device will + * be made PIO0. + */ + +static unsigned int oldpiix_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + + if (adev != ap->private_data) { + if (adev->dma_mode) + oldpiix_set_dmamode(ap, adev); + else if (adev->pio_mode) + oldpiix_set_piomode(ap, adev); + } + return ata_qc_issue_prot(qc); +} + + +static struct scsi_host_template oldpiix_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations oldpiix_pata_ops = { + .port_disable = ata_port_disable, + .set_piomode = oldpiix_set_piomode, + .set_dmamode = oldpiix_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = oldpiix_pata_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = oldpiix_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + + +/** + * oldpiix_init_one - Register PIIX ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in oldpiix_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. We probe for combined mode (sigh), + * and then hand over control to libata, for it to do the rest. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + static struct ata_port_info info = { + .sht = &oldpiix_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma1-2 */ + .port_ops = &oldpiix_pata_ops, + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, + "version " DRV_VERSION "\n"); + + return ata_pci_init_one(pdev, port_info, 2); +} + +static const struct pci_device_id oldpiix_pci_tbl[] = { + { PCI_DEVICE(0x8086, 0x1230), }, + { } /* terminate list */ +}; + +static struct pci_driver oldpiix_pci_driver = { + .name = DRV_NAME, + .id_table = oldpiix_pci_tbl, + .probe = oldpiix_init_one, + .remove = ata_pci_remove_one, +}; + +static int __init oldpiix_init(void) +{ + return pci_register_driver(&oldpiix_pci_driver); +} + +static void __exit oldpiix_exit(void) +{ + pci_unregister_driver(&oldpiix_pci_driver); +} + + +module_init(oldpiix_init); +module_exit(oldpiix_exit); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for early PIIX series controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, oldpiix_pci_tbl); +MODULE_VERSION(DRV_VERSION); + diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c new file mode 100644 index 00000000000..c3d01325e0e --- /dev/null +++ b/drivers/ata/pata_opti.c @@ -0,0 +1,292 @@ +/* + * pata_opti.c - ATI PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox + * + * Based on + * linux/drivers/ide/pci/opti621.c Version 0.7 Sept 10, 2002 + * + * Copyright (C) 1996-1998 Linus Torvalds & authors (see below) + * + * Authors: + * Jaromir Koutek , + * Jan Harkes , + * Mark Lord + * Some parts of code are from ali14xx.c and from rz1000.c. + * + * Also consulted the FreeBSD prototype driver by Kevin Day to try + * and resolve some confusions. Further documentation can be found in + * Ralf Brown's interrupt list + * + * If you have other variants of the Opti range (Viper/Vendetta) please + * try this driver with those PCI idents and report back. For the later + * chips see the pata_optidma driver + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_opti" +#define DRV_VERSION "0.2.4" + +enum { + READ_REG = 0, /* index of Read cycle timing register */ + WRITE_REG = 1, /* index of Write cycle timing register */ + CNTRL_REG = 3, /* index of Control register */ + STRAP_REG = 5, /* index of Strap register */ + MISC_REG = 6 /* index of Miscellaneous register */ +}; + +/** + * opti_pre_reset - probe begin + * @ap: ATA port + * + * Set up cable type and use generic probe init + */ + +static int opti_pre_reset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const struct pci_bits opti_enable_bits[] = { + { 0x45, 1, 0x80, 0x00 }, + { 0x40, 1, 0x08, 0x00 } + }; + + if (!pci_test_config_bits(pdev, &opti_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +/** + * opti_probe_reset - probe reset + * @ap: ATA port + * + * Perform the ATA probe and bus reset sequence plus specific handling + * for this hardware. The Opti needs little handling - we have no UDMA66 + * capability that needs cable detection. All we must do is check the port + * is enabled. + */ + +static void opti_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, opti_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * opti_write_reg - control register setup + * @ap: ATA port + * @value: value + * @reg: control register number + * + * The Opti uses magic 'trapdoor' register accesses to do configuration + * rather than using PCI space as other controllers do. The double inw + * on the error register activates configuration mode. We can then write + * the control register + */ + +static void opti_write_reg(struct ata_port *ap, u8 val, int reg) +{ + unsigned long regio = ap->ioaddr.cmd_addr; + + /* These 3 unlock the control register access */ + inw(regio + 1); + inw(regio + 1); + outb(3, regio + 2); + + /* Do the I/O */ + outb(val, regio + reg); + + /* Relock */ + outb(0x83, regio + 2); +} + +#if 0 +/** + * opti_read_reg - control register read + * @ap: ATA port + * @reg: control register number + * + * The Opti uses magic 'trapdoor' register accesses to do configuration + * rather than using PCI space as other controllers do. The double inw + * on the error register activates configuration mode. We can then read + * the control register + */ + +static u8 opti_read_reg(struct ata_port *ap, int reg) +{ + unsigned long regio = ap->ioaddr.cmd_addr; + u8 ret; + inw(regio + 1); + inw(regio + 1); + outb(3, regio + 2); + ret = inb(regio + reg); + outb(0x83, regio + 2); +} +#endif + +/** + * opti_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. Timing numbers are taken from + * the FreeBSD driver then pre computed to keep the code clean. There + * are two tables depending on the hardware clock speed. + */ + +static void opti_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_device *pair = ata_dev_pair(adev); + int clock; + int pio = adev->pio_mode - XFER_PIO_0; + unsigned long regio = ap->ioaddr.cmd_addr; + u8 addr; + + /* Address table precomputed with prefetch off and a DCLK of 2 */ + static const u8 addr_timing[2][5] = { + { 0x30, 0x20, 0x20, 0x10, 0x10 }, + { 0x20, 0x20, 0x10, 0x10, 0x10 } + }; + static const u8 data_rec_timing[2][5] = { + { 0x6B, 0x56, 0x42, 0x32, 0x31 }, + { 0x58, 0x44, 0x32, 0x22, 0x21 } + }; + + outb(0xff, regio + 5); + clock = inw(regio + 5) & 1; + + /* + * As with many controllers the address setup time is shared + * and must suit both devices if present. + */ + + addr = addr_timing[clock][pio]; + if (pair) { + /* Hardware constraint */ + u8 pair_addr = addr_timing[clock][pair->pio_mode - XFER_PIO_0]; + if (pair_addr > addr) + addr = pair_addr; + } + + /* Commence primary programming sequence */ + opti_write_reg(ap, adev->devno, MISC_REG); + opti_write_reg(ap, data_rec_timing[clock][pio], READ_REG); + opti_write_reg(ap, data_rec_timing[clock][pio], WRITE_REG); + opti_write_reg(ap, addr, MISC_REG); + + /* Programming sequence complete, override strapping */ + opti_write_reg(ap, 0x85, CNTRL_REG); +} + +static struct scsi_host_template opti_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations opti_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = opti_set_piomode, +/* .set_dmamode = opti_set_dmamode, */ + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = opti_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .sht = &opti_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .port_ops = &opti_port_ops + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + static int printed_version; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n"); + + return ata_pci_init_one(dev, port_info, 2); +} + +static const struct pci_device_id opti[] = { + { PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C621, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { 0, }, +}; + +static struct pci_driver opti_pci_driver = { + .name = DRV_NAME, + .id_table = opti, + .probe = opti_init_one, + .remove = ata_pci_remove_one +}; + +static int __init opti_init(void) +{ + return pci_register_driver(&opti_pci_driver); +} + + +static void __exit opti_exit(void) +{ + pci_unregister_driver(&opti_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Opti 621/621X"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, opti); +MODULE_VERSION(DRV_VERSION); + +module_init(opti_init); +module_exit(opti_exit); diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c new file mode 100644 index 00000000000..800aea7b944 --- /dev/null +++ b/drivers/ata/pata_optidma.c @@ -0,0 +1,547 @@ +/* + * pata_optidma.c - Opti DMA PATA for new ATA layer + * (C) 2006 Red Hat Inc + * Alan Cox + * + * The Opti DMA controllers are related to the older PIO PCI controllers + * and indeed the VLB ones. The main differences are that the timing + * numbers are now based off PCI clocks not VLB and differ, and that + * MWDMA is supported. + * + * This driver should support Viper-N+, FireStar, FireStar Plus. + * + * These devices support virtual DMA for read (aka the CS5520). Later + * chips support UDMA33, but only if the rest of the board logic does, + * so you have to get this right. We don't support the virtual DMA + * but we do handle UDMA. + * + * Bits that are worth knowing + * Most control registers are shadowed into I/O registers + * 0x1F5 bit 0 tells you if the PCI/VLB clock is 33 or 25Mhz + * Virtual DMA registers *move* between rev 0x02 and rev 0x10 + * UDMA requires a 66MHz FSB + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_optidma" +#define DRV_VERSION "0.2.1" + +enum { + READ_REG = 0, /* index of Read cycle timing register */ + WRITE_REG = 1, /* index of Write cycle timing register */ + CNTRL_REG = 3, /* index of Control register */ + STRAP_REG = 5, /* index of Strap register */ + MISC_REG = 6 /* index of Miscellaneous register */ +}; + +static int pci_clock; /* 0 = 33 1 = 25 */ + +/** + * optidma_pre_reset - probe begin + * @ap: ATA port + * + * Set up cable type and use generic probe init + */ + +static int optidma_pre_reset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const struct pci_bits optidma_enable_bits = { + 0x40, 1, 0x08, 0x00 + }; + + if (ap->port_no && !pci_test_config_bits(pdev, &optidma_enable_bits)) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +/** + * optidma_probe_reset - probe reset + * @ap: ATA port + * + * Perform the ATA probe and bus reset sequence plus specific handling + * for this hardware. The Opti needs little handling - we have no UDMA66 + * capability that needs cable detection. All we must do is check the port + * is enabled. + */ + +static void optidma_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, optidma_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * optidma_unlock - unlock control registers + * @ap: ATA port + * + * Unlock the control register block for this adapter. Registers must not + * be unlocked in a situation where libata might look at them. + */ + +static void optidma_unlock(struct ata_port *ap) +{ + unsigned long regio = ap->ioaddr.cmd_addr; + + /* These 3 unlock the control register access */ + inw(regio + 1); + inw(regio + 1); + outb(3, regio + 2); +} + +/** + * optidma_lock - issue temporary relock + * @ap: ATA port + * + * Re-lock the configuration register settings. + */ + +static void optidma_lock(struct ata_port *ap) +{ + unsigned long regio = ap->ioaddr.cmd_addr; + + /* Relock */ + outb(0x83, regio + 2); +} + +/** + * optidma_set_mode - set mode data + * @ap: ATA interface + * @adev: ATA device + * @mode: Mode to set + * + * Called to do the DMA or PIO mode setup. Timing numbers are all + * pre computed to keep the code clean. There are two tables depending + * on the hardware clock speed. + * + * WARNING: While we do this the IDE registers vanish. If we take an + * IRQ here we depend on the host set locking to avoid catastrophe. + */ + +static void optidma_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mode) +{ + struct ata_device *pair = ata_dev_pair(adev); + int pio = adev->pio_mode - XFER_PIO_0; + int dma = adev->dma_mode - XFER_MW_DMA_0; + unsigned long regio = ap->ioaddr.cmd_addr; + u8 addr; + + /* Address table precomputed with a DCLK of 2 */ + static const u8 addr_timing[2][5] = { + { 0x30, 0x20, 0x20, 0x10, 0x10 }, + { 0x20, 0x20, 0x10, 0x10, 0x10 } + }; + static const u8 data_rec_timing[2][5] = { + { 0x59, 0x46, 0x30, 0x20, 0x20 }, + { 0x46, 0x32, 0x20, 0x20, 0x10 } + }; + static const u8 dma_data_rec_timing[2][3] = { + { 0x76, 0x20, 0x20 }, + { 0x54, 0x20, 0x10 } + }; + + /* Switch from IDE to control mode */ + optidma_unlock(ap); + + + /* + * As with many controllers the address setup time is shared + * and must suit both devices if present. FIXME: Check if we + * need to look at slowest of PIO/DMA mode of either device + */ + + if (mode >= XFER_MW_DMA_0) + addr = 0; + else + addr = addr_timing[pci_clock][pio]; + + if (pair) { + u8 pair_addr; + /* Hardware constraint */ + if (pair->dma_mode) + pair_addr = 0; + else + pair_addr = addr_timing[pci_clock][pair->pio_mode - XFER_PIO_0]; + if (pair_addr > addr) + addr = pair_addr; + } + + /* Commence primary programming sequence */ + /* First we load the device number into the timing select */ + outb(adev->devno, regio + MISC_REG); + /* Now we load the data timings into read data/write data */ + if (mode < XFER_MW_DMA_0) { + outb(data_rec_timing[pci_clock][pio], regio + READ_REG); + outb(data_rec_timing[pci_clock][pio], regio + WRITE_REG); + } else if (mode < XFER_UDMA_0) { + outb(dma_data_rec_timing[pci_clock][dma], regio + READ_REG); + outb(dma_data_rec_timing[pci_clock][dma], regio + WRITE_REG); + } + /* Finally we load the address setup into the misc register */ + outb(addr | adev->devno, regio + MISC_REG); + + /* Programming sequence complete, timing 0 dev 0, timing 1 dev 1 */ + outb(0x85, regio + CNTRL_REG); + + /* Switch back to IDE mode */ + optidma_lock(ap); + + /* Note: at this point our programming is incomplete. We are + not supposed to program PCI 0x43 "things we hacked onto the chip" + until we've done both sets of PIO/DMA timings */ +} + +/** + * optiplus_set_mode - DMA setup for Firestar Plus + * @ap: ATA port + * @adev: device + * @mode: desired mode + * + * The Firestar plus has additional UDMA functionality for UDMA0-2 and + * requires we do some additional work. Because the base work we must do + * is mostly shared we wrap the Firestar setup functionality in this + * one + */ + +static void optiplus_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mode) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 udcfg; + u8 udslave; + int dev2 = 2 * adev->devno; + int unit = 2 * ap->port_no + adev->devno; + int udma = mode - XFER_UDMA_0; + + pci_read_config_byte(pdev, 0x44, &udcfg); + if (mode <= XFER_UDMA_0) { + udcfg &= ~(1 << unit); + optidma_set_mode(ap, adev, adev->dma_mode); + } else { + udcfg |= (1 << unit); + if (ap->port_no) { + pci_read_config_byte(pdev, 0x45, &udslave); + udslave &= ~(0x03 << dev2); + udslave |= (udma << dev2); + pci_write_config_byte(pdev, 0x45, udslave); + } else { + udcfg &= ~(0x30 << dev2); + udcfg |= (udma << dev2); + } + } + pci_write_config_byte(pdev, 0x44, udcfg); +} + +/** + * optidma_set_pio_mode - PIO setup callback + * @ap: ATA port + * @adev: Device + * + * The libata core provides separate functions for handling PIO and + * DMA programming. The architecture of the Firestar makes it easier + * for us to have a common function so we provide wrappers + */ + +static void optidma_set_pio_mode(struct ata_port *ap, struct ata_device *adev) +{ + optidma_set_mode(ap, adev, adev->pio_mode); +} + +/** + * optidma_set_dma_mode - DMA setup callback + * @ap: ATA port + * @adev: Device + * + * The libata core provides separate functions for handling PIO and + * DMA programming. The architecture of the Firestar makes it easier + * for us to have a common function so we provide wrappers + */ + +static void optidma_set_dma_mode(struct ata_port *ap, struct ata_device *adev) +{ + optidma_set_mode(ap, adev, adev->dma_mode); +} + +/** + * optiplus_set_pio_mode - PIO setup callback + * @ap: ATA port + * @adev: Device + * + * The libata core provides separate functions for handling PIO and + * DMA programming. The architecture of the Firestar makes it easier + * for us to have a common function so we provide wrappers + */ + +static void optiplus_set_pio_mode(struct ata_port *ap, struct ata_device *adev) +{ + optiplus_set_mode(ap, adev, adev->pio_mode); +} + +/** + * optiplus_set_dma_mode - DMA setup callback + * @ap: ATA port + * @adev: Device + * + * The libata core provides separate functions for handling PIO and + * DMA programming. The architecture of the Firestar makes it easier + * for us to have a common function so we provide wrappers + */ + +static void optiplus_set_dma_mode(struct ata_port *ap, struct ata_device *adev) +{ + optiplus_set_mode(ap, adev, adev->dma_mode); +} + +/** + * optidma_make_bits - PCI setup helper + * @adev: ATA device + * + * Turn the ATA device setup into PCI configuration bits + * for register 0x43 and return the two bits needed. + */ + +static u8 optidma_make_bits43(struct ata_device *adev) +{ + static const u8 bits43[5] = { + 0, 0, 0, 1, 2 + }; + if (!ata_dev_enabled(adev)) + return 0; + if (adev->dma_mode) + return adev->dma_mode - XFER_MW_DMA_0; + return bits43[adev->pio_mode - XFER_PIO_0]; +} + +/** + * optidma_post_set_mode - finalize PCI setup + * @ap: port to set up + * + * Finalise the configuration by writing the nibble of extra bits + * of data into the chip. + */ + +static void optidma_post_set_mode(struct ata_port *ap) +{ + u8 r; + int nybble = 4 * ap->port_no; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + pci_read_config_byte(pdev, 0x43, &r); + + r &= (0x0F << nybble); + r |= (optidma_make_bits43(&ap->device[0]) + + (optidma_make_bits43(&ap->device[0]) << 2)) << nybble; + + pci_write_config_byte(pdev, 0x43, r); +} + +static struct scsi_host_template optidma_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations optidma_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = optidma_set_pio_mode, + .set_dmamode = optidma_set_dma_mode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .error_handler = optidma_error_handler, + .post_set_mode = optidma_post_set_mode, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations optiplus_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = optiplus_set_pio_mode, + .set_dmamode = optiplus_set_dma_mode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .error_handler = optidma_error_handler, + .post_set_mode = optidma_post_set_mode, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * optiplus_with_udma - Look for UDMA capable setup + * @pdev; ATA controller + */ + +static int optiplus_with_udma(struct pci_dev *pdev) +{ + u8 r; + int ret = 0; + int ioport = 0x22; + struct pci_dev *dev1; + + /* Find function 1 */ + dev1 = pci_get_device(0x1045, 0xC701, NULL); + if(dev1 == NULL) + return 0; + + /* Rev must be >= 0x10 */ + pci_read_config_byte(dev1, 0x08, &r); + if (r < 0x10) + goto done_nomsg; + /* Read the chipset system configuration to check our mode */ + pci_read_config_byte(dev1, 0x5F, &r); + ioport |= (r << 8); + outb(0x10, ioport); + /* Must be 66Mhz sync */ + if ((inb(ioport + 2) & 1) == 0) + goto done; + + /* Check the ATA arbitration/timing is suitable */ + pci_read_config_byte(pdev, 0x42, &r); + if ((r & 0x36) != 0x36) + goto done; + pci_read_config_byte(dev1, 0x52, &r); + if (r & 0x80) /* IDEDIR disabled */ + ret = 1; +done: + printk(KERN_WARNING "UDMA not supported in this configuration.\n"); +done_nomsg: /* Wrong chip revision */ + pci_dev_put(dev1); + return ret; +} + +static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info_82c700 = { + .sht = &optidma_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &optidma_port_ops + }; + static struct ata_port_info info_82c700_udma = { + .sht = &optidma_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x07, + .port_ops = &optiplus_port_ops + }; + static struct ata_port_info *port_info[2]; + struct ata_port_info *info = &info_82c700; + static int printed_version; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n"); + + /* Fixed location chipset magic */ + inw(0x1F1); + inw(0x1F1); + pci_clock = inb(0x1F5) & 1; /* 0 = 33Mhz, 1 = 25Mhz */ + + if (optiplus_with_udma(dev)) + info = &info_82c700_udma; + + port_info[0] = port_info[1] = info; + return ata_pci_init_one(dev, port_info, 2); +} + +static const struct pci_device_id optidma[] = { + { PCI_DEVICE(0x1045, 0xD568), }, /* Opti 82C700 */ + { 0, }, +}; + +static struct pci_driver optidma_pci_driver = { + .name = DRV_NAME, + .id_table = optidma, + .probe = optidma_init_one, + .remove = ata_pci_remove_one +}; + +static int __init optidma_init(void) +{ + return pci_register_driver(&optidma_pci_driver); +} + + +static void __exit optidma_exit(void) +{ + pci_unregister_driver(&optidma_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Opti Firestar/Firestar Plus"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, optidma); +MODULE_VERSION(DRV_VERSION); + +module_init(optidma_init); +module_exit(optidma_exit); diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c new file mode 100644 index 00000000000..2abe0a3bbb9 --- /dev/null +++ b/drivers/ata/pata_pcmcia.c @@ -0,0 +1,393 @@ +/* + * pata_pcmcia.c - PCMCIA PATA controller driver. + * Copyright 2005-2006 Red Hat Inc , all rights reserved. + * PCMCIA ident update Copyright 2006 Marcin Juszkiewicz + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Heavily based upon ide-cs.c + * The initial developer of the original code is David A. Hinds + * . Portions created by David A. Hinds + * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + + +#define DRV_NAME "pata_pcmcia" +#define DRV_VERSION "0.2.9" + +/* + * Private data structure to glue stuff together + */ + +struct ata_pcmcia_info { + struct pcmcia_device *pdev; + int ndev; + dev_node_t node; +}; + +static struct scsi_host_template pcmcia_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations pcmcia_port_ops = { + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer_noirq, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +#define CS_CHECK(fn, ret) \ +do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) + +/** + * pcmcia_init_one - attach a PCMCIA interface + * @pdev: pcmcia device + * + * Register a PCMCIA IDE interface. Such interfaces are PIO 0 and + * shared IRQ. + */ + +static int pcmcia_init_one(struct pcmcia_device *pdev) +{ + struct ata_probe_ent ae; + struct ata_pcmcia_info *info; + tuple_t tuple; + struct { + unsigned short buf[128]; + cisparse_t parse; + config_info_t conf; + cistpl_cftable_entry_t dflt; + } *stk = NULL; + cistpl_cftable_entry_t *cfg; + int pass, last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM; + unsigned long io_base, ctl_base; + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (info == NULL) + return -ENOMEM; + + /* Glue stuff together. FIXME: We may be able to get rid of info with care */ + info->pdev = pdev; + pdev->priv = info; + + /* Set up attributes in order to probe card and get resources */ + pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + pdev->io.Attributes2 = IO_DATA_PATH_WIDTH_8; + pdev->io.IOAddrLines = 3; + pdev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; + pdev->irq.IRQInfo1 = IRQ_LEVEL_ID; + pdev->conf.Attributes = CONF_ENABLE_IRQ; + pdev->conf.IntType = INT_MEMORY_AND_IO; + + /* Allocate resoure probing structures */ + + stk = kzalloc(sizeof(*stk), GFP_KERNEL); + if (!stk) + goto out1; + + cfg = &stk->parse.cftable_entry; + + /* Tuples we are walking */ + tuple.TupleData = (cisdata_t *)&stk->buf; + tuple.TupleOffset = 0; + tuple.TupleDataMax = 255; + tuple.Attributes = 0; + tuple.DesiredTuple = CISTPL_CONFIG; + + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple)); + CS_CHECK(GetTupleData, pcmcia_get_tuple_data(pdev, &tuple)); + CS_CHECK(ParseTuple, pcmcia_parse_tuple(pdev, &tuple, &stk->parse)); + pdev->conf.ConfigBase = stk->parse.config.base; + pdev->conf.Present = stk->parse.config.rmask[0]; + + /* See if we have a manufacturer identifier. Use it to set is_kme for + vendor quirks */ + tuple.DesiredTuple = CISTPL_MANFID; + if (!pcmcia_get_first_tuple(pdev, &tuple) && !pcmcia_get_tuple_data(pdev, &tuple) && !pcmcia_parse_tuple(pdev, &tuple, &stk->parse)) + is_kme = ((stk->parse.manfid.manf == MANFID_KME) && ((stk->parse.manfid.card == PRODID_KME_KXLC005_A) || (stk->parse.manfid.card == PRODID_KME_KXLC005_B))); + + /* Not sure if this is right... look up the current Vcc */ + CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(pdev, &stk->conf)); +/* link->conf.Vcc = stk->conf.Vcc; */ + + pass = io_base = ctl_base = 0; + tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; + tuple.Attributes = 0; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple)); + + /* Now munch the resources looking for a suitable set */ + while (1) { + if (pcmcia_get_tuple_data(pdev, &tuple) != 0) + goto next_entry; + if (pcmcia_parse_tuple(pdev, &tuple, &stk->parse) != 0) + goto next_entry; + /* Check for matching Vcc, unless we're desperate */ + if (!pass) { + if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (stk->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) + goto next_entry; + } else if (stk->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (stk->conf.Vcc != stk->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) + goto next_entry; + } + } + + if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) + pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) + pdev->conf.Vpp = stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000; + + if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io; + pdev->conf.ConfigIndex = cfg->index; + pdev->io.BasePort1 = io->win[0].base; + pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + if (!(io->flags & CISTPL_IO_16BIT)) + pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + if (io->nwin == 2) { + pdev->io.NumPorts1 = 8; + pdev->io.BasePort2 = io->win[1].base; + pdev->io.NumPorts2 = (is_kme) ? 2 : 1; + if (pcmcia_request_io(pdev, &pdev->io) != 0) + goto next_entry; + io_base = pdev->io.BasePort1; + ctl_base = pdev->io.BasePort2; + } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { + pdev->io.NumPorts1 = io->win[0].len; + pdev->io.NumPorts2 = 0; + if (pcmcia_request_io(pdev, &pdev->io) != 0) + goto next_entry; + io_base = pdev->io.BasePort1; + ctl_base = pdev->io.BasePort1 + 0x0e; + } else goto next_entry; + /* If we've got this far, we're done */ + break; + } +next_entry: + if (cfg->flags & CISTPL_CFTABLE_DEFAULT) + memcpy(&stk->dflt, cfg, sizeof(stk->dflt)); + if (pass) { + CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(pdev, &tuple)); + } else if (pcmcia_get_next_tuple(pdev, &tuple) != 0) { + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple)); + memset(&stk->dflt, 0, sizeof(stk->dflt)); + pass++; + } + } + + CS_CHECK(RequestIRQ, pcmcia_request_irq(pdev, &pdev->irq)); + CS_CHECK(RequestConfiguration, pcmcia_request_configuration(pdev, &pdev->conf)); + + /* Success. Disable the IRQ nIEN line, do quirks */ + outb(0x02, ctl_base); + if (is_kme) + outb(0x81, ctl_base + 0x01); + + /* FIXME: Could be more ports at base + 0x10 but we only deal with + one right now */ + if (pdev->io.NumPorts1 >= 0x20) + printk(KERN_WARNING DRV_NAME ": second channel not yet supported.\n"); + + /* + * Having done the PCMCIA plumbing the ATA side is relatively + * sane. + */ + + memset(&ae, 0, sizeof(struct ata_probe_ent)); + INIT_LIST_HEAD(&ae.node); + ae.dev = &pdev->dev; + ae.port_ops = &pcmcia_port_ops; + ae.sht = &pcmcia_sht; + ae.n_ports = 1; + ae.pio_mask = 1; /* ISA so PIO 0 cycles */ + ae.irq = pdev->irq.AssignedIRQ; + ae.irq_flags = SA_SHIRQ; + ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST; + ae.port[0].cmd_addr = io_base; + ae.port[0].altstatus_addr = ctl_base; + ae.port[0].ctl_addr = ctl_base; + ata_std_ports(&ae.port[0]); + + if (ata_device_add(&ae) == 0) + goto failed; + + info->ndev = 1; + kfree(stk); + return 0; + +cs_failed: + cs_error(pdev, last_fn, last_ret); +failed: + kfree(stk); + info->ndev = 0; + pcmcia_disable_device(pdev); +out1: + kfree(info); + return ret; +} + +/** + * pcmcia_remove_one - unplug an pcmcia interface + * @pdev: pcmcia device + * + * A PCMCIA ATA device has been unplugged. Perform the needed + * cleanup. Also called on module unload for any active devices. + */ + +static void pcmcia_remove_one(struct pcmcia_device *pdev) +{ + struct ata_pcmcia_info *info = pdev->priv; + struct device *dev = &pdev->dev; + + if (info != NULL) { + /* If we have attached the device to the ATA layer, detach it */ + if (info->ndev) { + struct ata_host *host = dev_get_drvdata(dev); + ata_host_remove(host); + dev_set_drvdata(dev, NULL); + } + info->ndev = 0; + pdev->priv = NULL; + } + pcmcia_disable_device(pdev); + kfree(info); +} + +static struct pcmcia_device_id pcmcia_devices[] = { + PCMCIA_DEVICE_FUNC_ID(4), + PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000), /* Hitachi */ + PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704), + PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), + PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */ + PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d), + PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */ + PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */ + PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001), + PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar */ + PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0), + PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74), + PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9), + PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591), + PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728), + PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591), + PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4), + PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde), + PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf), + PCMCIA_DEVICE_PROD_ID12("EXP ", "CD-ROM", 0x0a5c52fd, 0x66536591), + PCMCIA_DEVICE_PROD_ID12("EXP ", "PnPIDE", 0x0a5c52fd, 0x0c694728), + PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e), + PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae), + PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178), + PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178), + PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753), + PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b), + PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149), + PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674), + PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b), + PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c), + PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79), + PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591), + PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728), + PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1), + PCMCIA_DEVICE_PROD_ID12("SEAGATE", "ST1", 0x87c1b330, 0xe1f30883), + PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "04/05/06", 0x43d74cb4, 0x6a22777d), + PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6), + PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003), + PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852), + PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209), + PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6), + PCMCIA_DEVICE_NULL, +}; + +MODULE_DEVICE_TABLE(pcmcia, pcmcia_devices); + +static struct pcmcia_driver pcmcia_driver = { + .owner = THIS_MODULE, + .drv = { + .name = DRV_NAME, + }, + .id_table = pcmcia_devices, + .probe = pcmcia_init_one, + .remove = pcmcia_remove_one, +}; + +static int __init pcmcia_init(void) +{ + return pcmcia_register_driver(&pcmcia_driver); +} + +static void __exit pcmcia_exit(void) +{ + pcmcia_unregister_driver(&pcmcia_driver); +} + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for PCMCIA ATA"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +module_init(pcmcia_init); +module_exit(pcmcia_exit); diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c new file mode 100644 index 00000000000..56b8c1ee293 --- /dev/null +++ b/drivers/ata/pata_pdc2027x.c @@ -0,0 +1,869 @@ +/* + * Promise PATA TX2/TX4/TX2000/133 IDE driver for pdc20268 to pdc20277. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Ported to libata by: + * Albert Lee IBM Corporation + * + * Copyright (C) 1998-2002 Andre Hedrick + * Portions Copyright (C) 1999 Promise Technology, Inc. + * + * Author: Frank Tiernan (frankt@promise.com) + * Released under terms of General Public License + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware information only available under NDA. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_pdc2027x" +#define DRV_VERSION "0.74-ac3" +#undef PDC_DEBUG + +#ifdef PDC_DEBUG +#define PDPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args) +#else +#define PDPRINTK(fmt, args...) +#endif + +enum { + PDC_UDMA_100 = 0, + PDC_UDMA_133 = 1, + + PDC_100_MHZ = 100000000, + PDC_133_MHZ = 133333333, + + PDC_SYS_CTL = 0x1100, + PDC_ATA_CTL = 0x1104, + PDC_GLOBAL_CTL = 0x1108, + PDC_CTCR0 = 0x110C, + PDC_CTCR1 = 0x1110, + PDC_BYTE_COUNT = 0x1120, + PDC_PLL_CTL = 0x1202, +}; + +static int pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +static void pdc2027x_remove_one(struct pci_dev *pdev); +static void pdc2027x_error_handler(struct ata_port *ap); +static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev); +static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev); +static void pdc2027x_post_set_mode(struct ata_port *ap); +static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc); + +/* + * ATA Timing Tables based on 133MHz controller clock. + * These tables are only used when the controller is in 133MHz clock. + * If the controller is in 100MHz clock, the ASIC hardware will + * set the timing registers automatically when "set feature" command + * is issued to the device. However, if the controller clock is 133MHz, + * the following tables must be used. + */ +static struct pdc2027x_pio_timing { + u8 value0, value1, value2; +} pdc2027x_pio_timing_tbl [] = { + { 0xfb, 0x2b, 0xac }, /* PIO mode 0 */ + { 0x46, 0x29, 0xa4 }, /* PIO mode 1 */ + { 0x23, 0x26, 0x64 }, /* PIO mode 2 */ + { 0x27, 0x0d, 0x35 }, /* PIO mode 3, IORDY on, Prefetch off */ + { 0x23, 0x09, 0x25 }, /* PIO mode 4, IORDY on, Prefetch off */ +}; + +static struct pdc2027x_mdma_timing { + u8 value0, value1; +} pdc2027x_mdma_timing_tbl [] = { + { 0xdf, 0x5f }, /* MDMA mode 0 */ + { 0x6b, 0x27 }, /* MDMA mode 1 */ + { 0x69, 0x25 }, /* MDMA mode 2 */ +}; + +static struct pdc2027x_udma_timing { + u8 value0, value1, value2; +} pdc2027x_udma_timing_tbl [] = { + { 0x4a, 0x0f, 0xd5 }, /* UDMA mode 0 */ + { 0x3a, 0x0a, 0xd0 }, /* UDMA mode 1 */ + { 0x2a, 0x07, 0xcd }, /* UDMA mode 2 */ + { 0x1a, 0x05, 0xcd }, /* UDMA mode 3 */ + { 0x1a, 0x03, 0xcd }, /* UDMA mode 4 */ + { 0x1a, 0x02, 0xcb }, /* UDMA mode 5 */ + { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */ +}; + +static const struct pci_device_id pdc2027x_pci_tbl[] = { + { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20268, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PDC_UDMA_100 }, + { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20269, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PDC_UDMA_133 }, + { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20270, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PDC_UDMA_100 }, + { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20271, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PDC_UDMA_133 }, + { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20275, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PDC_UDMA_133 }, + { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20276, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PDC_UDMA_133 }, + { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20277, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PDC_UDMA_133 }, + { } /* terminate list */ +}; + +static struct pci_driver pdc2027x_pci_driver = { + .name = DRV_NAME, + .id_table = pdc2027x_pci_tbl, + .probe = pdc2027x_init_one, + .remove = __devexit_p(pdc2027x_remove_one), +}; + +static struct scsi_host_template pdc2027x_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations pdc2027x_pata100_ops = { + .port_disable = ata_port_disable, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .check_atapi_dma = pdc2027x_check_atapi_dma, + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_mmio_data_xfer, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = pdc2027x_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_pci_host_stop, +}; + +static struct ata_port_operations pdc2027x_pata133_ops = { + .port_disable = ata_port_disable, + .set_piomode = pdc2027x_set_piomode, + .set_dmamode = pdc2027x_set_dmamode, + .post_set_mode = pdc2027x_post_set_mode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .check_atapi_dma = pdc2027x_check_atapi_dma, + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_mmio_data_xfer, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = pdc2027x_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_pci_host_stop, +}; + +static struct ata_port_info pdc2027x_port_info[] = { + /* PDC_UDMA_100 */ + { + .sht = &pdc2027x_sht, + .flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS | + ATA_FLAG_MMIO, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = ATA_UDMA5, /* udma0-5 */ + .port_ops = &pdc2027x_pata100_ops, + }, + /* PDC_UDMA_133 */ + { + .sht = &pdc2027x_sht, + .flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS | + ATA_FLAG_MMIO, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = ATA_UDMA6, /* udma0-6 */ + .port_ops = &pdc2027x_pata133_ops, + }, +}; + +MODULE_AUTHOR("Andre Hedrick, Frank Tiernan, Albert Lee"); +MODULE_DESCRIPTION("libata driver module for Promise PDC20268 to PDC20277"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); +MODULE_DEVICE_TABLE(pci, pdc2027x_pci_tbl); + +/** + * port_mmio - Get the MMIO address of PDC2027x extended registers + * @ap: Port + * @offset: offset from mmio base + */ +static inline void* port_mmio(struct ata_port *ap, unsigned int offset) +{ + return ap->host->mmio_base + ap->port_no * 0x100 + offset; +} + +/** + * dev_mmio - Get the MMIO address of PDC2027x extended registers + * @ap: Port + * @adev: device + * @offset: offset from mmio base + */ +static inline void* dev_mmio(struct ata_port *ap, struct ata_device *adev, unsigned int offset) +{ + u8 adj = (adev->devno) ? 0x08 : 0x00; + return port_mmio(ap, offset) + adj; +} + +/** + * pdc2027x_pata_cbl_detect - Probe host controller cable detect info + * @ap: Port for which cable detect info is desired + * + * Read 80c cable indicator from Promise extended register. + * This register is latched when the system is reset. + * + * LOCKING: + * None (inherited from caller). + */ +static void pdc2027x_cbl_detect(struct ata_port *ap) +{ + u32 cgcr; + + /* check cable detect results */ + cgcr = readl(port_mmio(ap, PDC_GLOBAL_CTL)); + if (cgcr & (1 << 26)) + goto cbl40; + + PDPRINTK("No cable or 80-conductor cable on port %d\n", ap->port_no); + + ap->cbl = ATA_CBL_PATA80; + return; + +cbl40: + printk(KERN_INFO DRV_NAME ": 40-conductor cable detected on port %d\n", ap->port_no); + ap->cbl = ATA_CBL_PATA40; + ap->udma_mask &= ATA_UDMA_MASK_40C; +} + +/** + * pdc2027x_port_enabled - Check PDC ATA control register to see whether the port is enabled. + * @ap: Port to check + */ +static inline int pdc2027x_port_enabled(struct ata_port *ap) +{ + return readb(port_mmio(ap, PDC_ATA_CTL)) & 0x02; +} + +/** + * pdc2027x_prereset - prereset for PATA host controller + * @ap: Target port + * + * Probeinit including cable detection. + * + * LOCKING: + * None (inherited from caller). + */ + +static int pdc2027x_prereset(struct ata_port *ap) +{ + /* Check whether port enabled */ + if (!pdc2027x_port_enabled(ap)) { + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + pdc2027x_cbl_detect(ap); + return ata_std_prereset(ap); +} + +/** + * pdc2027x_error_handler - Perform reset on PATA port and classify + * @ap: Port to reset + * + * Reset PATA phy and classify attached devices. + * + * LOCKING: + * None (inherited from caller). + */ + +static void pdc2027x_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, pdc2027x_prereset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * pdc2027x_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port to configure + * @adev: um + * @pio: PIO mode, 0 - 4 + * + * Set PIO mode for device. + * + * LOCKING: + * None (inherited from caller). + */ + +static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + u32 ctcr0, ctcr1; + + PDPRINTK("adev->pio_mode[%X]\n", adev->pio_mode); + + /* Sanity check */ + if (pio > 4) { + printk(KERN_ERR DRV_NAME ": Unknown pio mode [%d] ignored\n", pio); + return; + + } + + /* Set the PIO timing registers using value table for 133MHz */ + PDPRINTK("Set pio regs... \n"); + + ctcr0 = readl(dev_mmio(ap, adev, PDC_CTCR0)); + ctcr0 &= 0xffff0000; + ctcr0 |= pdc2027x_pio_timing_tbl[pio].value0 | + (pdc2027x_pio_timing_tbl[pio].value1 << 8); + writel(ctcr0, dev_mmio(ap, adev, PDC_CTCR0)); + + ctcr1 = readl(dev_mmio(ap, adev, PDC_CTCR1)); + ctcr1 &= 0x00ffffff; + ctcr1 |= (pdc2027x_pio_timing_tbl[pio].value2 << 24); + writel(ctcr1, dev_mmio(ap, adev, PDC_CTCR1)); + + PDPRINTK("Set pio regs done\n"); + + PDPRINTK("Set to pio mode[%u] \n", pio); +} + +/** + * pdc2027x_set_dmamode - Initialize host controller PATA UDMA timings + * @ap: Port to configure + * @adev: um + * @udma: udma mode, XFER_UDMA_0 to XFER_UDMA_6 + * + * Set UDMA mode for device. + * + * LOCKING: + * None (inherited from caller). + */ +static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + unsigned int dma_mode = adev->dma_mode; + u32 ctcr0, ctcr1; + + if ((dma_mode >= XFER_UDMA_0) && + (dma_mode <= XFER_UDMA_6)) { + /* Set the UDMA timing registers with value table for 133MHz */ + unsigned int udma_mode = dma_mode & 0x07; + + if (dma_mode == XFER_UDMA_2) { + /* + * Turn off tHOLD. + * If tHOLD is '1', the hardware will add half clock for data hold time. + * This code segment seems to be no effect. tHOLD will be overwritten below. + */ + ctcr1 = readl(dev_mmio(ap, adev, PDC_CTCR1)); + writel(ctcr1 & ~(1 << 7), dev_mmio(ap, adev, PDC_CTCR1)); + } + + PDPRINTK("Set udma regs... \n"); + + ctcr1 = readl(dev_mmio(ap, adev, PDC_CTCR1)); + ctcr1 &= 0xff000000; + ctcr1 |= pdc2027x_udma_timing_tbl[udma_mode].value0 | + (pdc2027x_udma_timing_tbl[udma_mode].value1 << 8) | + (pdc2027x_udma_timing_tbl[udma_mode].value2 << 16); + writel(ctcr1, dev_mmio(ap, adev, PDC_CTCR1)); + + PDPRINTK("Set udma regs done\n"); + + PDPRINTK("Set to udma mode[%u] \n", udma_mode); + + } else if ((dma_mode >= XFER_MW_DMA_0) && + (dma_mode <= XFER_MW_DMA_2)) { + /* Set the MDMA timing registers with value table for 133MHz */ + unsigned int mdma_mode = dma_mode & 0x07; + + PDPRINTK("Set mdma regs... \n"); + ctcr0 = readl(dev_mmio(ap, adev, PDC_CTCR0)); + + ctcr0 &= 0x0000ffff; + ctcr0 |= (pdc2027x_mdma_timing_tbl[mdma_mode].value0 << 16) | + (pdc2027x_mdma_timing_tbl[mdma_mode].value1 << 24); + + writel(ctcr0, dev_mmio(ap, adev, PDC_CTCR0)); + PDPRINTK("Set mdma regs done\n"); + + PDPRINTK("Set to mdma mode[%u] \n", mdma_mode); + } else { + printk(KERN_ERR DRV_NAME ": Unknown dma mode [%u] ignored\n", dma_mode); + } +} + +/** + * pdc2027x_post_set_mode - Set the timing registers back to correct values. + * @ap: Port to configure + * + * The pdc2027x hardware will look at "SET FEATURES" and change the timing registers + * automatically. The values set by the hardware might be incorrect, under 133Mhz PLL. + * This function overwrites the possibly incorrect values set by the hardware to be correct. + */ +static void pdc2027x_post_set_mode(struct ata_port *ap) +{ + int i; + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + + if (ata_dev_enabled(dev)) { + + pdc2027x_set_piomode(ap, dev); + + /* + * Enable prefetch if the device support PIO only. + */ + if (dev->xfer_shift == ATA_SHIFT_PIO) { + u32 ctcr1 = readl(dev_mmio(ap, dev, PDC_CTCR1)); + ctcr1 |= (1 << 25); + writel(ctcr1, dev_mmio(ap, dev, PDC_CTCR1)); + + PDPRINTK("Turn on prefetch\n"); + } else { + pdc2027x_set_dmamode(ap, dev); + } + } + } +} + +/** + * pdc2027x_check_atapi_dma - Check whether ATAPI DMA can be supported for this command + * @qc: Metadata associated with taskfile to check + * + * LOCKING: + * None (inherited from caller). + * + * RETURNS: 0 when ATAPI DMA can be used + * 1 otherwise + */ +static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *cmd = qc->scsicmd; + u8 *scsicmd = cmd->cmnd; + int rc = 1; /* atapi dma off by default */ + + /* + * This workaround is from Promise's GPL driver. + * If ATAPI DMA is used for commands not in the + * following white list, say MODE_SENSE and REQUEST_SENSE, + * pdc2027x might hit the irq lost problem. + */ + switch (scsicmd[0]) { + case READ_10: + case WRITE_10: + case READ_12: + case WRITE_12: + case READ_6: + case WRITE_6: + case 0xad: /* READ_DVD_STRUCTURE */ + case 0xbe: /* READ_CD */ + /* ATAPI DMA is ok */ + rc = 0; + break; + default: + ; + } + + return rc; +} + +/** + * pdc_read_counter - Read the ctr counter + * @probe_ent: for the port address + */ + +static long pdc_read_counter(struct ata_probe_ent *probe_ent) +{ + long counter; + int retry = 1; + u32 bccrl, bccrh, bccrlv, bccrhv; + +retry: + bccrl = readl(probe_ent->mmio_base + PDC_BYTE_COUNT) & 0xffff; + bccrh = readl(probe_ent->mmio_base + PDC_BYTE_COUNT + 0x100) & 0xffff; + rmb(); + + /* Read the counter values again for verification */ + bccrlv = readl(probe_ent->mmio_base + PDC_BYTE_COUNT) & 0xffff; + bccrhv = readl(probe_ent->mmio_base + PDC_BYTE_COUNT + 0x100) & 0xffff; + rmb(); + + counter = (bccrh << 15) | bccrl; + + PDPRINTK("bccrh [%X] bccrl [%X]\n", bccrh, bccrl); + PDPRINTK("bccrhv[%X] bccrlv[%X]\n", bccrhv, bccrlv); + + /* + * The 30-bit decreasing counter are read by 2 pieces. + * Incorrect value may be read when both bccrh and bccrl are changing. + * Ex. When 7900 decrease to 78FF, wrong value 7800 might be read. + */ + if (retry && !(bccrh == bccrhv && bccrl >= bccrlv)) { + retry--; + PDPRINTK("rereading counter\n"); + goto retry; + } + + return counter; +} + +/** + * adjust_pll - Adjust the PLL input clock in Hz. + * + * @pdc_controller: controller specific information + * @probe_ent: For the port address + * @pll_clock: The input of PLL in HZ + */ +static void pdc_adjust_pll(struct ata_probe_ent *probe_ent, long pll_clock, unsigned int board_idx) +{ + + u16 pll_ctl; + long pll_clock_khz = pll_clock / 1000; + long pout_required = board_idx? PDC_133_MHZ:PDC_100_MHZ; + long ratio = pout_required / pll_clock_khz; + int F, R; + + /* Sanity check */ + if (unlikely(pll_clock_khz < 5000L || pll_clock_khz > 70000L)) { + printk(KERN_ERR DRV_NAME ": Invalid PLL input clock %ldkHz, give up!\n", pll_clock_khz); + return; + } + +#ifdef PDC_DEBUG + PDPRINTK("pout_required is %ld\n", pout_required); + + /* Show the current clock value of PLL control register + * (maybe already configured by the firmware) + */ + pll_ctl = readw(probe_ent->mmio_base + PDC_PLL_CTL); + + PDPRINTK("pll_ctl[%X]\n", pll_ctl); +#endif + + /* + * Calculate the ratio of F, R and OD + * POUT = (F + 2) / (( R + 2) * NO) + */ + if (ratio < 8600L) { /* 8.6x */ + /* Using NO = 0x01, R = 0x0D */ + R = 0x0d; + } else if (ratio < 12900L) { /* 12.9x */ + /* Using NO = 0x01, R = 0x08 */ + R = 0x08; + } else if (ratio < 16100L) { /* 16.1x */ + /* Using NO = 0x01, R = 0x06 */ + R = 0x06; + } else if (ratio < 64000L) { /* 64x */ + R = 0x00; + } else { + /* Invalid ratio */ + printk(KERN_ERR DRV_NAME ": Invalid ratio %ld, give up!\n", ratio); + return; + } + + F = (ratio * (R+2)) / 1000 - 2; + + if (unlikely(F < 0 || F > 127)) { + /* Invalid F */ + printk(KERN_ERR DRV_NAME ": F[%d] invalid!\n", F); + return; + } + + PDPRINTK("F[%d] R[%d] ratio*1000[%ld]\n", F, R, ratio); + + pll_ctl = (R << 8) | F; + + PDPRINTK("Writing pll_ctl[%X]\n", pll_ctl); + + writew(pll_ctl, probe_ent->mmio_base + PDC_PLL_CTL); + readw(probe_ent->mmio_base + PDC_PLL_CTL); /* flush */ + + /* Wait the PLL circuit to be stable */ + mdelay(30); + +#ifdef PDC_DEBUG + /* + * Show the current clock value of PLL control register + * (maybe configured by the firmware) + */ + pll_ctl = readw(probe_ent->mmio_base + PDC_PLL_CTL); + + PDPRINTK("pll_ctl[%X]\n", pll_ctl); +#endif + + return; +} + +/** + * detect_pll_input_clock - Detect the PLL input clock in Hz. + * @probe_ent: for the port address + * Ex. 16949000 on 33MHz PCI bus for pdc20275. + * Half of the PCI clock. + */ +static long pdc_detect_pll_input_clock(struct ata_probe_ent *probe_ent) +{ + u32 scr; + long start_count, end_count; + long pll_clock; + + /* Read current counter value */ + start_count = pdc_read_counter(probe_ent); + + /* Start the test mode */ + scr = readl(probe_ent->mmio_base + PDC_SYS_CTL); + PDPRINTK("scr[%X]\n", scr); + writel(scr | (0x01 << 14), probe_ent->mmio_base + PDC_SYS_CTL); + readl(probe_ent->mmio_base + PDC_SYS_CTL); /* flush */ + + /* Let the counter run for 100 ms. */ + mdelay(100); + + /* Read the counter values again */ + end_count = pdc_read_counter(probe_ent); + + /* Stop the test mode */ + scr = readl(probe_ent->mmio_base + PDC_SYS_CTL); + PDPRINTK("scr[%X]\n", scr); + writel(scr & ~(0x01 << 14), probe_ent->mmio_base + PDC_SYS_CTL); + readl(probe_ent->mmio_base + PDC_SYS_CTL); /* flush */ + + /* calculate the input clock in Hz */ + pll_clock = (start_count - end_count) * 10; + + PDPRINTK("start[%ld] end[%ld] \n", start_count, end_count); + PDPRINTK("PLL input clock[%ld]Hz\n", pll_clock); + + return pll_clock; +} + +/** + * pdc_hardware_init - Initialize the hardware. + * @pdev: instance of pci_dev found + * @pdc_controller: controller specific information + * @pe: for the port address + */ +static int pdc_hardware_init(struct pci_dev *pdev, struct ata_probe_ent *pe, unsigned int board_idx) +{ + long pll_clock; + + /* + * Detect PLL input clock rate. + * On some system, where PCI bus is running at non-standard clock rate. + * Ex. 25MHz or 40MHz, we have to adjust the cycle_time. + * The pdc20275 controller employs PLL circuit to help correct timing registers setting. + */ + pll_clock = pdc_detect_pll_input_clock(pe); + + if (pll_clock < 0) /* counter overflow? Try again. */ + pll_clock = pdc_detect_pll_input_clock(pe); + + dev_printk(KERN_INFO, &pdev->dev, "PLL input clock %ld kHz\n", pll_clock/1000); + + /* Adjust PLL control register */ + pdc_adjust_pll(pe, pll_clock, board_idx); + + return 0; +} + +/** + * pdc_ata_setup_port - setup the mmio address + * @port: ata ioports to setup + * @base: base address + */ +static void pdc_ata_setup_port(struct ata_ioports *port, unsigned long base) +{ + port->cmd_addr = + port->data_addr = base; + port->feature_addr = + port->error_addr = base + 0x05; + port->nsect_addr = base + 0x0a; + port->lbal_addr = base + 0x0f; + port->lbam_addr = base + 0x10; + port->lbah_addr = base + 0x15; + port->device_addr = base + 0x1a; + port->command_addr = + port->status_addr = base + 0x1f; + port->altstatus_addr = + port->ctl_addr = base + 0x81a; +} + +/** + * pdc2027x_init_one - PCI probe function + * Called when an instance of PCI adapter is inserted. + * This function checks whether the hardware is supported, + * initialize hardware and register an instance of ata_host to + * libata by providing struct ata_probe_ent and ata_device_add(). + * (implements struct pci_driver.probe() ) + * + * @pdev: instance of pci_dev found + * @ent: matching entry in the id_tbl[] + */ +static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + unsigned int board_idx = (unsigned int) ent->driver_data; + + struct ata_probe_ent *probe_ent = NULL; + unsigned long base; + void *mmio_base; + int rc; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) + goto err_out; + + rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + + rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + + /* Prepare the probe entry */ + probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); + if (probe_ent == NULL) { + rc = -ENOMEM; + goto err_out_regions; + } + + probe_ent->dev = pci_dev_to_dev(pdev); + INIT_LIST_HEAD(&probe_ent->node); + + mmio_base = pci_iomap(pdev, 5, 0); + if (!mmio_base) { + rc = -ENOMEM; + goto err_out_free_ent; + } + + base = (unsigned long) mmio_base; + + probe_ent->sht = pdc2027x_port_info[board_idx].sht; + probe_ent->port_flags = pdc2027x_port_info[board_idx].flags; + probe_ent->pio_mask = pdc2027x_port_info[board_idx].pio_mask; + probe_ent->mwdma_mask = pdc2027x_port_info[board_idx].mwdma_mask; + probe_ent->udma_mask = pdc2027x_port_info[board_idx].udma_mask; + probe_ent->port_ops = pdc2027x_port_info[board_idx].port_ops; + + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = SA_SHIRQ; + probe_ent->mmio_base = mmio_base; + + pdc_ata_setup_port(&probe_ent->port[0], base + 0x17c0); + probe_ent->port[0].bmdma_addr = base + 0x1000; + pdc_ata_setup_port(&probe_ent->port[1], base + 0x15c0); + probe_ent->port[1].bmdma_addr = base + 0x1008; + + probe_ent->n_ports = 2; + + pci_set_master(pdev); + //pci_enable_intx(pdev); + + /* initialize adapter */ + if (pdc_hardware_init(pdev, probe_ent, board_idx) != 0) + goto err_out_free_ent; + + ata_device_add(probe_ent); + kfree(probe_ent); + + return 0; + +err_out_free_ent: + kfree(probe_ent); +err_out_regions: + pci_release_regions(pdev); +err_out: + pci_disable_device(pdev); + return rc; +} + +/** + * pdc2027x_remove_one - Called to remove a single instance of the + * adapter. + * + * @dev: The PCI device to remove. + * FIXME: module load/unload not working yet + */ +static void __devexit pdc2027x_remove_one(struct pci_dev *pdev) +{ + ata_pci_remove_one(pdev); +} + +/** + * pdc2027x_init - Called after this module is loaded into the kernel. + */ +static int __init pdc2027x_init(void) +{ + return pci_module_init(&pdc2027x_pci_driver); +} + +/** + * pdc2027x_exit - Called before this module unloaded from the kernel + */ +static void __exit pdc2027x_exit(void) +{ + pci_unregister_driver(&pdc2027x_pci_driver); +} + +module_init(pdc2027x_init); +module_exit(pdc2027x_exit); diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c new file mode 100644 index 00000000000..6cb52b0e769 --- /dev/null +++ b/drivers/ata/pata_pdc202xx_old.c @@ -0,0 +1,423 @@ +/* + * pata_pdc202xx_old.c - Promise PDC202xx PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox + * + * Based in part on linux/drivers/ide/pci/pdc202xx_old.c + * + * First cut with LBA48/ATAPI + * + * TODO: + * Channel interlock/reset on both required ? + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_pdc202xx_old" +#define DRV_VERSION "0.2.1" + +/** + * pdc2024x_pre_reset - probe begin + * @ap: ATA port + * + * Set up cable type and use generic probe init + */ + +static int pdc2024x_pre_reset(struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + + +static void pdc2024x_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, pdc2024x_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + + +static int pdc2026x_pre_reset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u16 cis; + + pci_read_config_word(pdev, 0x50, &cis); + if (cis & (1 << (10 + ap->port_no))) + ap->cbl = ATA_CBL_PATA80; + else + ap->cbl = ATA_CBL_PATA40; + + return ata_std_prereset(ap); +} + +static void pdc2026x_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, pdc2026x_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * pdc_configure_piomode - set chip PIO timing + * @ap: ATA interface + * @adev: ATA device + * @pio: PIO mode + * + * Called to do the PIO mode setup. Our timing registers are shared + * so a configure_dmamode call will undo any work we do here and vice + * versa + */ + +static void pdc_configure_piomode(struct ata_port *ap, struct ata_device *adev, int pio) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = 0x60 + 4 * ap->port_no + 2 * adev->devno; + static u16 pio_timing[5] = { + 0x0913, 0x050C , 0x0308, 0x0206, 0x0104 + }; + u8 r_ap, r_bp; + + pci_read_config_byte(pdev, port, &r_ap); + pci_read_config_byte(pdev, port + 1, &r_bp); + r_ap &= ~0x3F; /* Preserve ERRDY_EN, SYNC_IN */ + r_bp &= ~0x07; + r_ap |= (pio_timing[pio] >> 8); + r_bp |= (pio_timing[pio] & 0xFF); + + if (ata_pio_need_iordy(adev)) + r_ap |= 0x20; /* IORDY enable */ + if (adev->class == ATA_DEV_ATA) + r_ap |= 0x10; /* FIFO enable */ + pci_write_config_byte(pdev, port, r_ap); + pci_write_config_byte(pdev, port + 1, r_bp); +} + +/** + * pdc_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. Our timing registers are shared + * but we want to set the PIO timing by default. + */ + +static void pdc_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + pdc_configure_piomode(ap, adev, adev->pio_mode - XFER_PIO_0); +} + +/** + * pdc_configure_dmamode - set DMA mode in chip + * @ap: ATA interface + * @adev: ATA device + * + * Load DMA cycle times into the chip ready for a DMA transfer + * to occur. + */ + +static void pdc_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = 0x60 + 4 * ap->port_no + 2 * adev->devno; + static u8 udma_timing[6][2] = { + { 0x60, 0x03 }, /* 33 Mhz Clock */ + { 0x40, 0x02 }, + { 0x20, 0x01 }, + { 0x40, 0x02 }, /* 66 Mhz Clock */ + { 0x20, 0x01 }, + { 0x20, 0x01 } + }; + u8 r_bp, r_cp; + + pci_read_config_byte(pdev, port + 1, &r_bp); + pci_read_config_byte(pdev, port + 2, &r_cp); + + r_bp &= ~0xF0; + r_cp &= ~0x0F; + + if (adev->dma_mode >= XFER_UDMA_0) { + int speed = adev->dma_mode - XFER_UDMA_0; + r_bp |= udma_timing[speed][0]; + r_cp |= udma_timing[speed][1]; + + } else { + int speed = adev->dma_mode - XFER_MW_DMA_0; + r_bp |= 0x60; + r_cp |= (5 - speed); + } + pci_write_config_byte(pdev, port + 1, r_bp); + pci_write_config_byte(pdev, port + 2, r_cp); + +} + +/** + * pdc2026x_bmdma_start - DMA engine begin + * @qc: ATA command + * + * In UDMA3 or higher we have to clock switch for the duration of the + * DMA transfer sequence. + */ + +static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct ata_taskfile *tf = &qc->tf; + int sel66 = ap->port_no ? 0x08: 0x02; + + unsigned long master = ap->host->ports[0]->ioaddr.bmdma_addr; + unsigned long clock = master + 0x11; + unsigned long atapi_reg = master + 0x20 + (4 * ap->port_no); + + u32 len; + + /* Check we keep host level locking here */ + if (adev->dma_mode >= XFER_UDMA_2) + outb(inb(clock) | sel66, clock); + else + outb(inb(clock) & ~sel66, clock); + + /* The DMA clocks may have been trashed by a reset. FIXME: make conditional + and move to qc_issue ? */ + pdc_set_dmamode(ap, qc->dev); + + /* Cases the state machine will not complete correctly without help */ + if ((tf->flags & ATA_TFLAG_LBA48) || tf->protocol == ATA_PROT_ATAPI_DMA) + { + if (tf->flags & ATA_TFLAG_LBA48) + len = qc->nsect * 512; + else + len = qc->nbytes; + + if (tf->flags & ATA_TFLAG_WRITE) + len |= 0x06000000; + else + len |= 0x05000000; + + outl(len, atapi_reg); + } + + /* Activate DMA */ + ata_bmdma_start(qc); +} + +/** + * pdc2026x_bmdma_end - DMA engine stop + * @qc: ATA command + * + * After a DMA completes we need to put the clock back to 33MHz for + * PIO timings. + */ + +static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct ata_taskfile *tf = &qc->tf; + + int sel66 = ap->port_no ? 0x08: 0x02; + /* The clock bits are in the same register for both channels */ + unsigned long master = ap->host->ports[0]->ioaddr.bmdma_addr; + unsigned long clock = master + 0x11; + unsigned long atapi_reg = master + 0x20 + (4 * ap->port_no); + + /* Cases the state machine will not complete correctly */ + if (tf->protocol == ATA_PROT_ATAPI_DMA || ( tf->flags & ATA_TFLAG_LBA48)) { + outl(0, atapi_reg); + outb(inb(clock) & ~sel66, clock); + } + /* Check we keep host level locking here */ + /* Flip back to 33Mhz for PIO */ + if (adev->dma_mode >= XFER_UDMA_2) + outb(inb(clock) & ~sel66, clock); + + ata_bmdma_stop(qc); +} + +/** + * pdc2026x_dev_config - device setup hook + * @ap: ATA port + * @adev: newly found device + * + * Perform chip specific early setup. We need to lock the transfer + * sizes to 8bit to avoid making the state engine on the 2026x cards + * barf. + */ + +static void pdc2026x_dev_config(struct ata_port *ap, struct ata_device *adev) +{ + adev->max_sectors = 256; +} + +static struct scsi_host_template pdc_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations pdc2024x_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = pdc_set_piomode, + .set_dmamode = pdc_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = pdc2024x_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations pdc2026x_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = pdc_set_piomode, + .set_dmamode = pdc_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + .dev_config = pdc2026x_dev_config, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = pdc2026x_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = pdc2026x_bmdma_start, + .bmdma_stop = pdc2026x_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int pdc_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info[3] = { + { + .sht = &pdc_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA2, + .port_ops = &pdc2024x_port_ops + }, + { + .sht = &pdc_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA4, + .port_ops = &pdc2026x_port_ops + }, + { + .sht = &pdc_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA5, + .port_ops = &pdc2026x_port_ops + } + + }; + static struct ata_port_info *port_info[2]; + + port_info[0] = port_info[1] = &info[id->driver_data]; + + if (dev->device == PCI_DEVICE_ID_PROMISE_20265) { + struct pci_dev *bridge = dev->bus->self; + /* Don't grab anything behind a Promise I2O RAID */ + if (bridge && bridge->vendor == PCI_VENDOR_ID_INTEL) { + if( bridge->device == PCI_DEVICE_ID_INTEL_I960) + return -ENODEV; + if( bridge->device == PCI_DEVICE_ID_INTEL_I960RM) + return -ENODEV; + } + } + return ata_pci_init_one(dev, port_info, 2); +} + +static struct pci_device_id pdc[] = { + { PCI_DEVICE(PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20246), 0}, + { PCI_DEVICE(PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20262), 1}, + { PCI_DEVICE(PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20263), 1}, + { PCI_DEVICE(PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20265), 2}, + { PCI_DEVICE(PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20267), 2}, + { 0, }, +}; + +static struct pci_driver pdc_pci_driver = { + .name = DRV_NAME, + .id_table = pdc, + .probe = pdc_init_one, + .remove = ata_pci_remove_one +}; + +static int __init pdc_init(void) +{ + return pci_register_driver(&pdc_pci_driver); +} + + +static void __exit pdc_exit(void) +{ + pci_unregister_driver(&pdc_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Promise 2024x and 20262-20267"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, pdc); +MODULE_VERSION(DRV_VERSION); + +module_init(pdc_init); +module_exit(pdc_exit); diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c new file mode 100644 index 00000000000..ededb40e084 --- /dev/null +++ b/drivers/ata/pata_qdi.c @@ -0,0 +1,403 @@ +/* + * pata_qdi.c - QDI VLB ATA controllers + * (C) 2006 Red Hat + * + * This driver mostly exists as a proof of concept for non PCI devices under + * libata. While the QDI6580 was 'neat' in 1993 it is no longer terribly + * useful. + * + * Tuning code written from the documentation at + * http://www.ryston.cz/petr/vlb/qd6500.html + * http://www.ryston.cz/petr/vlb/qd6580.html + * + * Probe code based on drivers/ide/legacy/qd65xx.c + * Rewritten from the work of Colten Edwards by + * Samuel Thibault + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_qdi" +#define DRV_VERSION "0.2.4" + +#define NR_HOST 4 /* Two 6580s */ + +struct qdi_data { + unsigned long timing; + u8 clock[2]; + u8 last; + int fast; + struct platform_device *platform_dev; + +}; + +static struct ata_host *qdi_host[NR_HOST]; +static struct qdi_data qdi_data[NR_HOST]; +static int nr_qdi_host; + +#ifdef MODULE +static int probe_qdi = 1; +#else +static int probe_qdi; +#endif + +static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_timing t; + struct qdi_data *qdi = ap->host->private_data; + int active, recovery; + u8 timing; + + /* Get the timing data in cycles */ + ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); + + if (qdi->fast) { + active = 8 - FIT(t.active, 1, 8); + recovery = 18 - FIT(t.recover, 3, 18); + } else { + active = 9 - FIT(t.active, 2, 9); + recovery = 15 - FIT(t.recover, 0, 15); + } + timing = (recovery << 4) | active | 0x08; + + qdi->clock[adev->devno] = timing; + + outb(timing, qdi->timing); +} + +static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_timing t; + struct qdi_data *qdi = ap->host->private_data; + int active, recovery; + u8 timing; + + /* Get the timing data in cycles */ + ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); + + if (qdi->fast) { + active = 8 - FIT(t.active, 1, 8); + recovery = 18 - FIT(t.recover, 3, 18); + } else { + active = 9 - FIT(t.active, 2, 9); + recovery = 15 - FIT(t.recover, 0, 15); + } + timing = (recovery << 4) | active | 0x08; + + qdi->clock[adev->devno] = timing; + + outb(timing, qdi->timing); + + /* Clear the FIFO */ + if (adev->class != ATA_DEV_ATA) + outb(0x5F, (qdi->timing & 0xFFF0) + 3); +} + +/** + * qdi_qc_issue_prot - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings. + */ + +static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct qdi_data *qdi = ap->host->private_data; + + if (qdi->clock[adev->devno] != qdi->last) { + if (adev->pio_mode) { + qdi->last = qdi->clock[adev->devno]; + outb(qdi->clock[adev->devno], qdi->timing); + } + } + return ata_qc_issue_prot(qc); +} + +static void qdi_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data) +{ + struct ata_port *ap = adev->ap; + int slop = buflen & 3; + + if (ata_id_has_dword_io(adev->id)) { + if (write_data) + outsl(ap->ioaddr.data_addr, buf, buflen >> 2); + else + insl(ap->ioaddr.data_addr, buf, buflen >> 2); + + if (unlikely(slop)) { + u32 pad; + if (write_data) { + memcpy(&pad, buf + buflen - slop, slop); + outl(le32_to_cpu(pad), ap->ioaddr.data_addr); + } else { + pad = cpu_to_le16(inl(ap->ioaddr.data_addr)); + memcpy(buf + buflen - slop, &pad, slop); + } + } + } else + ata_pio_data_xfer(adev, buf, buflen, write_data); +} + +static struct scsi_host_template qdi_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations qdi6500_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = qdi6500_set_piomode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .qc_prep = ata_qc_prep, + .qc_issue = qdi_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = qdi_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations qdi6580_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = qdi6580_set_piomode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .qc_prep = ata_qc_prep, + .qc_issue = qdi_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = qdi_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * qdi_init_one - attach a qdi interface + * @type: Type to display + * @io: I/O port start + * @irq: interrupt line + * @fast: True if on a > 33Mhz VLB + * + * Register an ISA bus IDE interface. Such interfaces are PIO and we + * assume do not support IRQ sharing. + */ + +static __init int qdi_init_one(unsigned long port, int type, unsigned long io, int irq, int fast) +{ + struct ata_probe_ent ae; + struct platform_device *pdev; + int ret; + + unsigned long ctrl = io + 0x206; + + /* + * Fill in a probe structure first of all + */ + + pdev = platform_device_register_simple(DRV_NAME, nr_qdi_host, NULL, 0); + if (pdev == NULL) + return -ENOMEM; + + memset(&ae, 0, sizeof(struct ata_probe_ent)); + INIT_LIST_HEAD(&ae.node); + ae.dev = &pdev->dev; + + if (type == 6580) { + ae.port_ops = &qdi6580_port_ops; + ae.pio_mask = 0x1F; + } else { + ae.port_ops = &qdi6500_port_ops; + ae.pio_mask = 0x07; /* Actually PIO3 !IORDY is possible */ + } + + ae.sht = &qdi_sht; + ae.n_ports = 1; + ae.irq = irq; + ae.irq_flags = 0; + ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST; + ae.port[0].cmd_addr = io; + ae.port[0].altstatus_addr = ctrl; + ae.port[0].ctl_addr = ctrl; + ata_std_ports(&ae.port[0]); + + /* + * Hook in a private data structure per channel + */ + ae.private_data = &qdi_data[nr_qdi_host]; + + qdi_data[nr_qdi_host].timing = port; + qdi_data[nr_qdi_host].fast = fast; + qdi_data[nr_qdi_host].platform_dev = pdev; + + printk(KERN_INFO DRV_NAME": qd%d at 0x%lx.\n", type, io); + ret = ata_device_add(&ae); + if (ret == 0) { + platform_device_unregister(pdev); + return -ENODEV; + } + + qdi_host[nr_qdi_host++] = dev_get_drvdata(&pdev->dev); + return 0; +} + +/** + * qdi_init - attach qdi interfaces + * + * Attach qdi IDE interfaces by scanning the ports it may occupy. + */ + +static __init int qdi_init(void) +{ + unsigned long flags; + static const unsigned long qd_port[2] = { 0x30, 0xB0 }; + static const unsigned long ide_port[2] = { 0x170, 0x1F0 }; + static const int ide_irq[2] = { 14, 15 }; + + int ct = 0; + int i; + + if (probe_qdi == 0) + return -ENODEV; + + /* + * Check each possible QD65xx base address + */ + + for (i = 0; i < 2; i++) { + unsigned long port = qd_port[i]; + u8 r, res; + + + if (request_region(port, 2, "pata_qdi")) { + /* Check for a card */ + local_irq_save(flags); + r = inb_p(port); + outb_p(0x19, port); + res = inb_p(port); + outb_p(r, port); + local_irq_restore(flags); + + /* Fail */ + if (res == 0x19) + { + release_region(port, 2); + continue; + } + + /* Passes the presence test */ + r = inb_p(port + 1); /* Check port agrees with port set */ + if ((r & 2) >> 1 != i) { + release_region(port, 2); + continue; + } + + /* Check card type */ + if ((r & 0xF0) == 0xC0) { + /* QD6500: single channel */ + if (r & 8) { + /* Disabled ? */ + release_region(port, 2); + continue; + } + ct += qdi_init_one(port, 6500, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04); + } + if (((r & 0xF0) == 0xA0) || (r & 0xF0) == 0x50) { + /* QD6580: dual channel */ + if (!request_region(port + 2 , 2, "pata_qdi")) + { + release_region(port, 2); + continue; + } + res = inb(port + 3); + if (res & 1) { + /* Single channel mode */ + ct += qdi_init_one(port, 6580, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04); + } else { + /* Dual channel mode */ + ct += qdi_init_one(port, 6580, 0x1F0, 14, r & 0x04); + ct += qdi_init_one(port + 2, 6580, 0x170, 15, r & 0x04); + } + } + } + } + if (ct != 0) + return 0; + return -ENODEV; +} + +static __exit void qdi_exit(void) +{ + int i; + + for (i = 0; i < nr_qdi_host; i++) { + ata_host_remove(qdi_host[i]); + /* Free the control resource. The 6580 dual channel has the resources + * claimed as a pair of 2 byte resources so we need no special cases... + */ + release_region(qdi_data[i].timing, 2); + platform_device_unregister(qdi_data[i].platform_dev); + } +} + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for qdi ATA"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +module_init(qdi_init); +module_exit(qdi_exit); + +module_param(probe_qdi, int, 0); + diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c new file mode 100644 index 00000000000..6f7d0527265 --- /dev/null +++ b/drivers/ata/pata_radisys.c @@ -0,0 +1,335 @@ +/* + * pata_radisys.c - Intel PATA/SATA controllers + * + * (C) 2006 Red Hat + * + * Some parts based on ata_piix.c by Jeff Garzik and others. + * + * A PIIX relative, this device has a single ATA channel and no + * slave timings, SITRE or PPE. In that sense it is a close relative + * of the original PIIX. It does however support UDMA 33/66 per channel + * although no other modes/timings. Also lacking is 32bit I/O on the ATA + * port. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_radisys" +#define DRV_VERSION "0.4.1" + +/** + * radisys_probe_init - probe begin + * @ap: ATA port + * + * Set up cable type and use generic probe init + */ + +static int radisys_pre_reset(struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA80; + return ata_std_prereset(ap); +} + + +/** + * radisys_pata_error_handler - Probe specified port on PATA host controller + * @ap: Port to probe + * @classes: + * + * LOCKING: + * None (inherited from caller). + */ + +static void radisys_pata_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, radisys_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * radisys_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: um + * + * Set PIO mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void radisys_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + struct pci_dev *dev = to_pci_dev(ap->host->dev); + u16 idetm_data; + int control = 0; + + /* + * See Intel Document 298600-004 for the timing programing rules + * for PIIX/ICH. Note that the early PIIX does not have the slave + * timing port at 0x44. The Radisys is a relative of the PIIX + * but not the same so be careful. + */ + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, /* Check me */ + { 0, 0 }, + { 1, 1 }, + { 2, 2 }, + { 3, 3 }, }; + + if (pio > 0) + control |= 1; /* TIME1 enable */ + if (ata_pio_need_iordy(adev)) + control |= 2; /* IE IORDY */ + + pci_read_config_word(dev, 0x40, &idetm_data); + + /* Enable IE and TIME as appropriate. Clear the other + drive timing bits */ + idetm_data &= 0xCCCC; + idetm_data |= (control << (4 * adev->devno)); + idetm_data |= (timings[pio][0] << 12) | + (timings[pio][1] << 8); + pci_write_config_word(dev, 0x40, idetm_data); + + /* Track which port is configured */ + ap->private_data = adev; +} + +/** + * radisys_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * @isich: True if the device is an ICH and has IOCFG registers + * + * Set MWDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void radisys_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *dev = to_pci_dev(ap->host->dev); + u16 idetm_data; + u8 udma_enable; + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 1 }, + { 2, 2 }, + { 3, 3 }, }; + + /* + * MWDMA is driven by the PIO timings. We must also enable + * IORDY unconditionally. + */ + + pci_read_config_word(dev, 0x40, &idetm_data); + pci_read_config_byte(dev, 0x48, &udma_enable); + + if (adev->dma_mode < XFER_UDMA_0) { + unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0; + const unsigned int needed_pio[3] = { + XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 + }; + int pio = needed_pio[mwdma] - XFER_PIO_0; + int control = 3; /* IORDY|TIME0 */ + + /* If the drive MWDMA is faster than it can do PIO then + we must force PIO0 for PIO cycles. */ + + if (adev->pio_mode < needed_pio[mwdma]) + control = 1; + + /* Mask out the relevant control and timing bits we will load. Also + clear the other drive TIME register as a precaution */ + + idetm_data &= 0xCCCC; + idetm_data |= control << (4 * adev->devno); + idetm_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8); + + udma_enable &= ~(1 << adev->devno); + } else { + u8 udma_mode; + + /* UDMA66 on: UDMA 33 and 66 are switchable via register 0x4A */ + + pci_read_config_byte(dev, 0x4A, &udma_mode); + + if (adev->xfer_mode == XFER_UDMA_2) + udma_mode &= ~ (1 << adev->devno); + else /* UDMA 4 */ + udma_mode |= (1 << adev->devno); + + pci_write_config_byte(dev, 0x4A, udma_mode); + + udma_enable |= (1 << adev->devno); + } + pci_write_config_word(dev, 0x40, idetm_data); + pci_write_config_byte(dev, 0x48, udma_enable); + + /* Track which port is configured */ + ap->private_data = adev; +} + +/** + * radisys_qc_issue_prot - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings if + * neccessary. Our logic also clears TIME0/TIME1 for the other device so + * that, even if we get this wrong, cycles to the other device will + * be made PIO0. + */ + +static unsigned int radisys_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + + if (adev != ap->private_data) { + /* UDMA timing is not shared */ + if (adev->dma_mode < XFER_UDMA_0) { + if (adev->dma_mode) + radisys_set_dmamode(ap, adev); + else if (adev->pio_mode) + radisys_set_piomode(ap, adev); + } + } + return ata_qc_issue_prot(qc); +} + + +static struct scsi_host_template radisys_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations radisys_pata_ops = { + .port_disable = ata_port_disable, + .set_piomode = radisys_set_piomode, + .set_dmamode = radisys_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = radisys_pata_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = radisys_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .eng_timeout = ata_eng_timeout, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + + +/** + * radisys_init_one - Register PIIX ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in radisys_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. We probe for combined mode (sigh), + * and then hand over control to libata, for it to do the rest. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + static struct ata_port_info info = { + .sht = &radisys_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma1-2 */ + .udma_mask = 0x14, /* UDMA33/66 only */ + .port_ops = &radisys_pata_ops, + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, + "version " DRV_VERSION "\n"); + + return ata_pci_init_one(pdev, port_info, 2); +} + +static const struct pci_device_id radisys_pci_tbl[] = { + { 0x1331, 0x8201, PCI_ANY_ID, PCI_ANY_ID, }, + { } /* terminate list */ +}; + +static struct pci_driver radisys_pci_driver = { + .name = DRV_NAME, + .id_table = radisys_pci_tbl, + .probe = radisys_init_one, + .remove = ata_pci_remove_one, +}; + +static int __init radisys_init(void) +{ + return pci_register_driver(&radisys_pci_driver); +} + +static void __exit radisys_exit(void) +{ + pci_unregister_driver(&radisys_pci_driver); +} + + +module_init(radisys_init); +module_exit(radisys_exit); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for Radisys R82600 controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, radisys_pci_tbl); +MODULE_VERSION(DRV_VERSION); + diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c new file mode 100644 index 00000000000..3c6d84fd431 --- /dev/null +++ b/drivers/ata/pata_rz1000.c @@ -0,0 +1,205 @@ +/* + * RZ1000/1001 driver based upon + * + * linux/drivers/ide/pci/rz1000.c Version 0.06 January 12, 2003 + * Copyright (C) 1995-1998 Linus Torvalds & author (see below) + * Principal Author: mlord@pobox.com (Mark Lord) + * + * See linux/MAINTAINERS for address of current maintainer. + * + * This file provides support for disabling the buggy read-ahead + * mode of the RZ1000 IDE chipset, commonly used on Intel motherboards. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_rz1000" +#define DRV_VERSION "0.2.2" + + +/** + * rz1000_prereset - probe begin + * @ap: ATA port + * + * Set up cable type and use generics + */ + +static int rz1000_prereset(struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +/** + * rz1000_error_handler - probe reset + * @ap: ATA port + * + * Perform the ATA standard reset sequence + */ + +static void rz1000_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, rz1000_prereset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * rz1000_set_mode - mode setting function + * @ap: ATA interface + * + * Use a non standard set_mode function. We don't want to be tuned. We + * would prefer to be BIOS generic but for the fact our hardware is + * whacked out. + */ + +static void rz1000_set_mode(struct ata_port *ap) +{ + int i; + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + if (ata_dev_enabled(dev)) { + /* We don't really care */ + dev->pio_mode = XFER_PIO_0; + dev->xfer_mode = XFER_PIO_0; + dev->xfer_shift = ATA_SHIFT_PIO; + dev->flags |= ATA_DFLAG_PIO; + } + } +} + + +static struct scsi_host_template rz1000_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations rz1000_port_ops = { + .set_mode = rz1000_set_mode, + + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .error_handler = rz1000_error_handler, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = rz1000_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * rz1000_init_one - Register RZ1000 ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in rz1000_pci_tbl matching with @pdev + * + * Configure an RZ1000 interface. This doesn't require much special + * handling except that we *MUST* kill the chipset readahead or the + * user may experience data corruption. + */ + +static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + struct ata_port_info *port_info[2]; + u16 reg; + static struct ata_port_info info = { + .sht = &rz1000_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .port_ops = &rz1000_port_ops + }; + + if (!printed_version++) + printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + + /* Be exceptionally paranoid as we must be sure to apply the fix */ + if (pci_read_config_word(pdev, 0x40, ®) != 0) + goto fail; + reg &= 0xDFFF; + if (pci_write_config_word(pdev, 0x40, reg) != 0) + goto fail; + printk(KERN_INFO DRV_NAME ": disabled chipset readahead.\n"); + + port_info[0] = &info; + port_info[1] = &info; + return ata_pci_init_one(pdev, port_info, 2); +fail: + printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n"); + /* Not safe to use so skip */ + return -ENODEV; +} + +static struct pci_device_id pata_rz1000[] = { + { PCI_DEVICE(PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_RZ1000), }, + { PCI_DEVICE(PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_RZ1001), }, + { 0, }, +}; + +static struct pci_driver rz1000_pci_driver = { + .name = DRV_NAME, + .id_table = pata_rz1000, + .probe = rz1000_init_one, + .remove = ata_pci_remove_one +}; + + +static int __init rz1000_init(void) +{ + return pci_register_driver(&rz1000_pci_driver); +} + +static void __exit rz1000_exit(void) +{ + pci_unregister_driver(&rz1000_pci_driver); +} + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for RZ1000 PCI ATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, pata_rz1000); +MODULE_VERSION(DRV_VERSION); + +module_init(rz1000_init); +module_exit(rz1000_exit); + diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c new file mode 100644 index 00000000000..9b42b9a5242 --- /dev/null +++ b/drivers/ata/pata_sc1200.c @@ -0,0 +1,287 @@ +/* + * New ATA layer SC1200 driver Alan Cox + * + * TODO: Mode selection filtering + * TODO: Can't enable second channel until ATA core has serialize + * TODO: Needs custom DMA cleanup code + * + * Based very heavily on + * + * linux/drivers/ide/pci/sc1200.c Version 0.91 28-Jan-2003 + * + * Copyright (C) 2000-2002 Mark Lord + * May be copied or modified under the terms of the GNU General Public License + * + * Development of this chipset driver was funded + * by the nice folks at National Semiconductor. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "sc1200" +#define DRV_VERSION "0.2.3" + +#define SC1200_REV_A 0x00 +#define SC1200_REV_B1 0x01 +#define SC1200_REV_B3 0x02 +#define SC1200_REV_C1 0x03 +#define SC1200_REV_D1 0x04 + +/** + * sc1200_clock - PCI clock + * + * Return the PCI bus clocking for the SC1200 chipset configuration + * in use. We return 0 for 33MHz 1 for 48MHz and 2 for 66Mhz + */ + +static int sc1200_clock(void) +{ + /* Magic registers that give us the chipset data */ + u8 chip_id = inb(0x903C); + u8 silicon_rev = inb(0x903D); + u16 pci_clock; + + if (chip_id == 0x04 && silicon_rev < SC1200_REV_B1) + return 0; /* 33 MHz mode */ + + /* Clock generator configuration 0x901E its 8/9 are the PCI clocking + 0/3 is 33Mhz 1 is 48 2 is 66 */ + + pci_clock = inw(0x901E); + pci_clock >>= 8; + pci_clock &= 0x03; + if (pci_clock == 3) + pci_clock = 0; + return pci_clock; +} + +/** + * sc1200_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Set our PIO requirements. This is fairly simple on the SC1200 + */ + +static void sc1200_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + static const u32 pio_timings[4][5] = { + {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010}, // format0 33Mhz + {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}, // format1, 33Mhz + {0xfaa3f4f3, 0xc23232b2, 0x513101c1, 0x31213121, 0x10211021}, // format1, 48Mhz + {0xfff4fff4, 0xf35353d3, 0x814102f1, 0x42314231, 0x11311131} // format1, 66Mhz + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 format; + unsigned int reg = 0x40 + 0x10 * ap->port_no; + int mode = adev->pio_mode - XFER_PIO_0; + + pci_read_config_dword(pdev, reg + 4, &format); + format >>= 31; + format += sc1200_clock(); + pci_write_config_dword(pdev, reg + 8 * adev->devno, + pio_timings[format][mode]); +} + +/** + * sc1200_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + * We cannot mix MWDMA and UDMA without reloading timings each switch + * master to slave. + */ + +static void sc1200_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static const u32 udma_timing[3][3] = { + { 0x00921250, 0x00911140, 0x00911030 }, + { 0x00932470, 0x00922260, 0x00922140 }, + { 0x009436A1, 0x00933481, 0x00923261 } + }; + + static const u32 mwdma_timing[3][3] = { + { 0x00077771, 0x00012121, 0x00002020 }, + { 0x000BBBB2, 0x00024241, 0x00013131 }, + { 0x000FFFF3, 0x00035352, 0x00015151 } + }; + + int clock = sc1200_clock(); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + unsigned int reg = 0x40 + 0x10 * ap->port_no; + int mode = adev->dma_mode; + u32 format; + + if (mode >= XFER_UDMA_0) + format = udma_timing[clock][mode - XFER_UDMA_0]; + else + format = mwdma_timing[clock][mode - XFER_MW_DMA_0]; + + if (adev->devno == 0) { + u32 timings; + + pci_read_config_dword(pdev, reg + 4, &timings); + timings &= 0x80000000UL; + timings |= format; + pci_write_config_dword(pdev, reg + 4, timings); + } else + pci_write_config_dword(pdev, reg + 12, format); +} + +/** + * sc1200_qc_issue_prot - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings if + * neccessary. Specifically we have a problem that there is only + * one MWDMA/UDMA bit. + */ + +static unsigned int sc1200_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct ata_device *prev = ap->private_data; + + /* See if the DMA settings could be wrong */ + if (adev->dma_mode != 0 && adev != prev && prev != NULL) { + /* Maybe, but do the channels match MWDMA/UDMA ? */ + if ((adev->dma_mode >= XFER_UDMA_0 && prev->dma_mode < XFER_UDMA_0) || + (adev->dma_mode < XFER_UDMA_0 && prev->dma_mode >= XFER_UDMA_0)) + /* Switch the mode bits */ + sc1200_set_dmamode(ap, adev); + } + + return ata_qc_issue_prot(qc); +} + +static struct scsi_host_template sc1200_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations sc1200_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = sc1200_set_piomode, + .set_dmamode = sc1200_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .error_handler = ata_bmdma_error_handler, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = sc1200_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * sc1200_init_one - Initialise an SC1200 + * @dev: PCI device + * @id: Entry in match table + * + * Just throw the needed data at the libata helper and it does all + * our work. + */ + +static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .sht = &sc1200_sht, + .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x07, + .port_ops = &sc1200_port_ops + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + + /* Can't enable port 2 yet, see top comments */ + return ata_pci_init_one(dev, port_info, 1); +} + +static struct pci_device_id sc1200[] = { + { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_IDE), }, + { 0, }, +}; + +static struct pci_driver sc1200_pci_driver = { + .name = DRV_NAME, + .id_table = sc1200, + .probe = sc1200_init_one, + .remove = ata_pci_remove_one +}; + +static int __init sc1200_init(void) +{ + return pci_register_driver(&sc1200_pci_driver); +} + + +static void __exit sc1200_exit(void) +{ + pci_unregister_driver(&sc1200_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox, Mark Lord"); +MODULE_DESCRIPTION("low-level driver for the NS/AMD SC1200"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sc1200); +MODULE_VERSION(DRV_VERSION); + +module_init(sc1200_init); +module_exit(sc1200_exit); diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c new file mode 100644 index 00000000000..3ec30036c97 --- /dev/null +++ b/drivers/ata/pata_serverworks.c @@ -0,0 +1,587 @@ +/* + * ata-serverworks.c - Serverworks PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox + * + * based upon + * + * serverworks.c + * + * Copyright (C) 1998-2000 Michel Aubry + * Copyright (C) 1998-2000 Andrzej Krzysztofowicz + * Copyright (C) 1998-2000 Andre Hedrick + * Portions copyright (c) 2001 Sun Microsystems + * + * + * RCC/ServerWorks IDE driver for Linux + * + * OSB4: `Open South Bridge' IDE Interface (fn 1) + * supports UDMA mode 2 (33 MB/s) + * + * CSB5: `Champion South Bridge' IDE Interface (fn 1) + * all revisions support UDMA mode 4 (66 MB/s) + * revision A2.0 and up support UDMA mode 5 (100 MB/s) + * + * *** The CSB5 does not provide ANY register *** + * *** to detect 80-conductor cable presence. *** + * + * CSB6: `Champion South Bridge' IDE Interface (optional: third channel) + * + * Documentation: + * Available under NDA only. Errata info very hard to get. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_serverworks" +#define DRV_VERSION "0.3.6" + +#define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */ +#define SVWKS_CSB6_REVISION 0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */ + +/* Seagate Barracuda ATA IV Family drives in UDMA mode 5 + * can overrun their FIFOs when used with the CSB5 */ + +static const char *csb_bad_ata100[] = { + "ST320011A", + "ST340016A", + "ST360021A", + "ST380021A", + NULL +}; + +/** + * dell_cable - Dell serverworks cable detection + * @ap: ATA port to do cable detect + * + * Dell hide the 40/80 pin select for their interfaces in the top two + * bits of the subsystem ID. + */ + +static int dell_cable(struct ata_port *ap) { + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (pdev->subsystem_device & (1 << (ap->port_no + 14))) + return ATA_CBL_PATA80; + return ATA_CBL_PATA40; +} + +/** + * sun_cable - Sun Cobalt 'Alpine' cable detection + * @ap: ATA port to do cable select + * + * Cobalt CSB5 IDE hides the 40/80pin in the top two bits of the + * subsystem ID the same as dell. We could use one function but we may + * need to extend the Dell one in future + */ + +static int sun_cable(struct ata_port *ap) { + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (pdev->subsystem_device & (1 << (ap->port_no + 14))) + return ATA_CBL_PATA80; + return ATA_CBL_PATA40; +} + +/** + * osb4_cable - OSB4 cable detect + * @ap: ATA port to check + * + * The OSB4 isn't UDMA66 capable so this is easy + */ + +static int osb4_cable(struct ata_port *ap) { + return ATA_CBL_PATA40; +} + +/** + * csb4_cable - CSB5/6 cable detect + * @ap: ATA port to check + * + * Serverworks default arrangement is to use the drive side detection + * only. + */ + +static int csb_cable(struct ata_port *ap) { + return ATA_CBL_PATA80; +} + +struct sv_cable_table { + int device; + int subvendor; + int (*cable_detect)(struct ata_port *ap); +}; + +/* + * Note that we don't copy the old serverworks code because the old + * code contains obvious mistakes + */ + +static struct sv_cable_table cable_detect[] = { + { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_DELL, dell_cable }, + { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_VENDOR_ID_DELL, dell_cable }, + { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_SUN, sun_cable }, + { PCI_DEVICE_ID_SERVERWORKS_OSB4, PCI_ANY_ID, osb4_cable }, + { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, csb_cable }, + { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, csb_cable }, + { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, csb_cable }, + { PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, csb_cable }, + { } +}; + +/** + * serverworks_pre_reset - cable detection + * @ap: ATA port + * + * Perform cable detection according to the device and subvendor + * identifications + */ + +static int serverworks_pre_reset(struct ata_port *ap) { + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct sv_cable_table *cb = cable_detect; + + while(cb->device) { + if (cb->device == pdev->device && + (cb->subvendor == pdev->subsystem_vendor || + cb->subvendor == PCI_ANY_ID)) { + ap->cbl = cb->cable_detect(ap); + return ata_std_prereset(ap); + } + cb++; + } + + BUG(); + return -1; /* kill compiler warning */ +} + +static void serverworks_error_handler(struct ata_port *ap) +{ + return ata_bmdma_drive_eh(ap, serverworks_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * serverworks_is_csb - Check for CSB or OSB + * @pdev: PCI device to check + * + * Returns true if the device being checked is known to be a CSB + * series device. + */ + +static u8 serverworks_is_csb(struct pci_dev *pdev) +{ + switch (pdev->device) { + case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE: + case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE: + case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2: + case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE: + return 1; + default: + break; + } + return 0; +} + +/** + * serverworks_osb4_filter - mode selection filter + * @ap: ATA interface + * @adev: ATA device + * + * Filter the offered modes for the device to apply controller + * specific rules. OSB4 requires no UDMA for disks due to a FIFO + * bug we hit. + */ + +static unsigned long serverworks_osb4_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask) +{ + if (adev->class == ATA_DEV_ATA) + mask &= ~ATA_MASK_UDMA; + return ata_pci_default_filter(ap, adev, mask); +} + + +/** + * serverworks_csb_filter - mode selection filter + * @ap: ATA interface + * @adev: ATA device + * + * Check the blacklist and disable UDMA5 if matched + */ + +static unsigned long serverworks_csb_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask) +{ + const char *p; + char model_num[40]; + int len, i; + + /* Disk, UDMA */ + if (adev->class != ATA_DEV_ATA) + return ata_pci_default_filter(ap, adev, mask); + + /* Actually do need to check */ + ata_id_string(adev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num)); + /* Precuationary - why not do this in the libata core ?? */ + + len = strlen(model_num); + while ((len > 0) && (model_num[len - 1] == ' ')) { + len--; + model_num[len] = 0; + } + + for(i = 0; (p = csb_bad_ata100[i]) != NULL; i++) { + if (!strncmp(p, model_num, len)) + mask &= ~(0x1F << ATA_SHIFT_UDMA); + } + return ata_pci_default_filter(ap, adev, mask); +} + + +/** + * serverworks_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the OSB4/CSB5 timing registers for PIO. The PIO register + * load is done as a simple lookup. + */ +static void serverworks_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + static const u8 pio_mode[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 }; + int offset = 1 + (2 * ap->port_no) - adev->devno; + int devbits = (2 * ap->port_no + adev->devno) * 4; + u16 csb5_pio; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int pio = adev->pio_mode - XFER_PIO_0; + + pci_write_config_byte(pdev, 0x40 + offset, pio_mode[pio]); + + /* The OSB4 just requires the timing but the CSB series want the + mode number as well */ + if (serverworks_is_csb(pdev)) { + pci_read_config_word(pdev, 0x4A, &csb5_pio); + csb5_pio &= ~(0x0F << devbits); + pci_write_config_byte(pdev, 0x4A, csb5_pio | (pio << devbits)); + } +} + +/** + * serverworks_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the MWDMA/UDMA modes for the serverworks OSB4/CSB5 + * chipset. The MWDMA mode values are pulled from a lookup table + * while the chipset uses mode number for UDMA. + */ + +static void serverworks_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static const u8 dma_mode[] = { 0x77, 0x21, 0x20 }; + int offset = 1 + 2 * ap->port_no - adev->devno; + int devbits = (2 * ap->port_no + adev->devno); + u8 ultra; + u8 ultra_cfg; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + pci_read_config_byte(pdev, 0x54, &ultra_cfg); + + if (adev->dma_mode >= XFER_UDMA_0) { + pci_write_config_byte(pdev, 0x44 + offset, 0x20); + + pci_read_config_byte(pdev, 0x56 + ap->port_no, &ultra); + ultra &= ~(0x0F << (ap->port_no * 4)); + ultra |= (adev->dma_mode - XFER_UDMA_0) + << (ap->port_no * 4); + pci_write_config_byte(pdev, 0x56 + ap->port_no, ultra); + + ultra_cfg |= (1 << devbits); + } else { + pci_write_config_byte(pdev, 0x44 + offset, + dma_mode[adev->dma_mode - XFER_MW_DMA_0]); + ultra_cfg &= ~(1 << devbits); + } + pci_write_config_byte(pdev, 0x54, ultra_cfg); +} + +static struct scsi_host_template serverworks_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations serverworks_osb4_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = serverworks_set_piomode, + .set_dmamode = serverworks_set_dmamode, + .mode_filter = serverworks_osb4_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = serverworks_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations serverworks_csb_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = serverworks_set_piomode, + .set_dmamode = serverworks_set_dmamode, + .mode_filter = serverworks_csb_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = serverworks_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int serverworks_fixup_osb4(struct pci_dev *pdev) +{ + u32 reg; + struct pci_dev *isa_dev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_OSB4, NULL); + if (isa_dev) { + pci_read_config_dword(isa_dev, 0x64, ®); + reg &= ~0x00002000; /* disable 600ns interrupt mask */ + if (!(reg & 0x00004000)) + printk(KERN_DEBUG DRV_NAME ": UDMA not BIOS enabled.\n"); + reg |= 0x00004000; /* enable UDMA/33 support */ + pci_write_config_dword(isa_dev, 0x64, reg); + pci_dev_put(isa_dev); + return 0; + } + printk(KERN_WARNING "ata_serverworks: Unable to find bridge.\n"); + return -ENODEV; +} + +static int serverworks_fixup_csb(struct pci_dev *pdev) +{ + u8 rev; + u8 btr; + + pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); + + /* Third Channel Test */ + if (!(PCI_FUNC(pdev->devfn) & 1)) { + struct pci_dev * findev = NULL; + u32 reg4c = 0; + findev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_CSB5, NULL); + if (findev) { + pci_read_config_dword(findev, 0x4C, ®4c); + reg4c &= ~0x000007FF; + reg4c |= 0x00000040; + reg4c |= 0x00000020; + pci_write_config_dword(findev, 0x4C, reg4c); + pci_dev_put(findev); + } + } else { + struct pci_dev * findev = NULL; + u8 reg41 = 0; + + findev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_CSB6, NULL); + if (findev) { + pci_read_config_byte(findev, 0x41, ®41); + reg41 &= ~0x40; + pci_write_config_byte(findev, 0x41, reg41); + pci_dev_put(findev); + } + } + /* setup the UDMA Control register + * + * 1. clear bit 6 to enable DMA + * 2. enable DMA modes with bits 0-1 + * 00 : legacy + * 01 : udma2 + * 10 : udma2/udma4 + * 11 : udma2/udma4/udma5 + */ + pci_read_config_byte(pdev, 0x5A, &btr); + btr &= ~0x40; + if (!(PCI_FUNC(pdev->devfn) & 1)) + btr |= 0x2; + else + btr |= (rev >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2; + pci_write_config_byte(pdev, 0x5A, btr); + + return btr; +} + +static void serverworks_fixup_ht1000(struct pci_dev *pdev) +{ + u8 btr; + /* Setup HT1000 SouthBridge Controller - Single Channel Only */ + pci_read_config_byte(pdev, 0x5A, &btr); + btr &= ~0x40; + btr |= 0x3; + pci_write_config_byte(pdev, 0x5A, btr); +} + + +static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + int ports = 2; + static struct ata_port_info info[4] = { + { /* OSB4 */ + .sht = &serverworks_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x07, + .port_ops = &serverworks_osb4_port_ops + }, { /* OSB4 no UDMA */ + .sht = &serverworks_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x00, + .port_ops = &serverworks_osb4_port_ops + }, { /* CSB5 */ + .sht = &serverworks_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x1f, + .port_ops = &serverworks_csb_port_ops + }, { /* CSB5 - later revisions*/ + .sht = &serverworks_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, + .port_ops = &serverworks_csb_port_ops + } + }; + static struct ata_port_info *port_info[2]; + struct ata_port_info *devinfo = &info[id->driver_data]; + + /* Force master latency timer to 64 PCI clocks */ + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40); + + /* OSB4 : South Bridge and IDE */ + if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { + /* Select non UDMA capable OSB4 if we can't do fixups */ + if ( serverworks_fixup_osb4(pdev) < 0) + devinfo = &info[1]; + } + /* setup CSB5/CSB6 : South Bridge and IDE option RAID */ + else if ((pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) || + (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) || + (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) { + + /* If the returned btr is the newer revision then + select the right info block */ + if (serverworks_fixup_csb(pdev) == 3) + devinfo = &info[3]; + + /* Is this the 3rd channel CSB6 IDE ? */ + if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2) + ports = 1; + } + /* setup HT1000E */ + else if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) + serverworks_fixup_ht1000(pdev); + + if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) + ata_pci_clear_simplex(pdev); + + port_info[0] = port_info[1] = devinfo; + return ata_pci_init_one(pdev, port_info, ports); +} + +static struct pci_device_id serverworks[] = { + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE), 0}, + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE), 2}, + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE), 2}, + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2), 2}, + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE), 2}, + { 0, }, +}; + +static struct pci_driver serverworks_pci_driver = { + .name = DRV_NAME, + .id_table = serverworks, + .probe = serverworks_init_one, + .remove = ata_pci_remove_one +}; + +static int __init serverworks_init(void) +{ + return pci_register_driver(&serverworks_pci_driver); +} + + +static void __exit serverworks_exit(void) +{ + pci_unregister_driver(&serverworks_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Serverworks OSB4/CSB5/CSB6"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, serverworks); +MODULE_VERSION(DRV_VERSION); + +module_init(serverworks_init); +module_exit(serverworks_exit); diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c new file mode 100644 index 00000000000..8f7db9638d0 --- /dev/null +++ b/drivers/ata/pata_sil680.c @@ -0,0 +1,381 @@ +/* + * pata_sil680.c - SIL680 PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox + * + * based upon + * + * linux/drivers/ide/pci/siimage.c Version 1.07 Nov 30, 2003 + * + * Copyright (C) 2001-2002 Andre Hedrick + * Copyright (C) 2003 Red Hat + * + * May be copied or modified under the terms of the GNU General Public License + * + * Documentation publically available. + * + * If you have strange problems with nVidia chipset systems please + * see the SI support documentation and update your system BIOS + * if neccessary + * + * TODO + * If we know all our devices are LBA28 (or LBA28 sized) we could use + * the command fifo mode. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_sil680" +#define DRV_VERSION "0.3.2" + +/** + * sil680_selreg - return register base + * @hwif: interface + * @r: config offset + * + * Turn a config register offset into the right address in either + * PCI space or MMIO space to access the control register in question + * Thankfully this is a configuration operation so isnt performance + * criticial. + */ + +static unsigned long sil680_selreg(struct ata_port *ap, int r) +{ + unsigned long base = 0xA0 + r; + base += (ap->port_no << 4); + return base; +} + +/** + * sil680_seldev - return register base + * @hwif: interface + * @r: config offset + * + * Turn a config register offset into the right address in either + * PCI space or MMIO space to access the control register in question + * including accounting for the unit shift. + */ + +static unsigned long sil680_seldev(struct ata_port *ap, struct ata_device *adev, int r) +{ + unsigned long base = 0xA0 + r; + base += (ap->port_no << 4); + base |= adev->devno ? 2 : 0; + return base; +} + + +/** + * sil680_cable_detect - cable detection + * @ap: ATA port + * + * Perform cable detection. The SIL680 stores this in PCI config + * space for us. + */ + +static int sil680_cable_detect(struct ata_port *ap) { + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + unsigned long addr = sil680_selreg(ap, 0); + u8 ata66; + pci_read_config_byte(pdev, addr, &ata66); + if (ata66 & 1) + return ATA_CBL_PATA80; + else + return ATA_CBL_PATA40; +} + +static int sil680_pre_reset(struct ata_port *ap) +{ + ap->cbl = sil680_cable_detect(ap); + return ata_std_prereset(ap); +} + +/** + * sil680_bus_reset - reset the SIL680 bus + * @ap: ATA port to reset + * + * Perform the SIL680 housekeeping when doing an ATA bus reset + */ + +static int sil680_bus_reset(struct ata_port *ap,unsigned int *classes) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + unsigned long addr = sil680_selreg(ap, 0); + u8 reset; + + pci_read_config_byte(pdev, addr, &reset); + pci_write_config_byte(pdev, addr, reset | 0x03); + udelay(25); + pci_write_config_byte(pdev, addr, reset); + return ata_std_softreset(ap, classes); +} + +static void sil680_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, sil680_pre_reset, sil680_bus_reset, NULL, ata_std_postreset); +} + +/** + * sil680_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the SIL680 registers for PIO mode. Note that the task speed + * registers are shared between the devices so we must pick the lowest + * mode for command work. + */ + +static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + static u16 speed_p[5] = { 0x328A, 0x2283, 0x1104, 0x10C3, 0x10C1 }; + static u16 speed_t[5] = { 0x328A, 0x1281, 0x1281, 0x10C3, 0x10C1 }; + + unsigned long tfaddr = sil680_selreg(ap, 0x02); + unsigned long addr = sil680_seldev(ap, adev, 0x04); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int pio = adev->pio_mode - XFER_PIO_0; + int lowest_pio = pio; + u16 reg; + + struct ata_device *pair = ata_dev_pair(adev); + + if (pair != NULL && adev->pio_mode > pair->pio_mode) + lowest_pio = pair->pio_mode - XFER_PIO_0; + + pci_write_config_word(pdev, addr, speed_p[pio]); + pci_write_config_word(pdev, tfaddr, speed_t[lowest_pio]); + + pci_read_config_word(pdev, tfaddr-2, ®); + reg &= ~0x0200; /* Clear IORDY */ + if (ata_pio_need_iordy(adev)) + reg |= 0x0200; /* Enable IORDY */ + pci_write_config_word(pdev, tfaddr-2, reg); +} + +/** + * sil680_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the MWDMA/UDMA modes for the sil680 k + * chipset. The MWDMA mode values are pulled from a lookup table + * while the chipset uses mode number for UDMA. + */ + +static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static u8 ultra_table[2][7] = { + { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01, 0xFF }, /* 100MHz */ + { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 }, /* 133Mhz */ + }; + static u16 dma_table[3] = { 0x2208, 0x10C2, 0x10C1 }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + unsigned long ma = sil680_seldev(ap, adev, 0x08); + unsigned long ua = sil680_seldev(ap, adev, 0x0C); + unsigned long addr_mask = 0x80 + 4 * ap->port_no; + int port_shift = adev->devno * 4; + u8 scsc, mode; + u16 multi, ultra; + + pci_read_config_byte(pdev, 0x8A, &scsc); + pci_read_config_byte(pdev, addr_mask, &mode); + pci_read_config_word(pdev, ma, &multi); + pci_read_config_word(pdev, ua, &ultra); + + /* Mask timing bits */ + ultra &= ~0x3F; + mode &= ~(0x03 << port_shift); + + /* Extract scsc */ + scsc = (scsc & 0x30) ? 1: 0; + + if (adev->dma_mode >= XFER_UDMA_0) { + multi = 0x10C1; + ultra |= ultra_table[scsc][adev->dma_mode - XFER_UDMA_0]; + mode |= (0x03 << port_shift); + } else { + multi = dma_table[adev->dma_mode - XFER_MW_DMA_0]; + mode |= (0x02 << port_shift); + } + pci_write_config_byte(pdev, addr_mask, mode); + pci_write_config_word(pdev, ma, multi); + pci_write_config_word(pdev, ua, ultra); +} + +static struct scsi_host_template sil680_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations sil680_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = sil680_set_piomode, + .set_dmamode = sil680_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = sil680_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .sht = &sil680_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, + .port_ops = &sil680_port_ops + }; + static struct ata_port_info info_slow = { + .sht = &sil680_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, + .port_ops = &sil680_port_ops + }; + static struct ata_port_info *port_info[2] = {&info, &info}; + static int printed_version; + u32 class_rev = 0; + u8 tmpbyte = 0; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + + pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev); + class_rev &= 0xff; + /* FIXME: double check */ + pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, (class_rev) ? 1 : 255); + + pci_write_config_byte(pdev, 0x80, 0x00); + pci_write_config_byte(pdev, 0x84, 0x00); + + pci_read_config_byte(pdev, 0x8A, &tmpbyte); + + printk(KERN_INFO "sil680: BA5_EN = %d clock = %02X\n", + tmpbyte & 1, tmpbyte & 0x30); + + switch(tmpbyte & 0x30) { + case 0x00: + /* 133 clock attempt to force it on */ + pci_write_config_byte(pdev, 0x8A, tmpbyte|0x10); + break; + case 0x30: + /* if clocking is disabled */ + /* 133 clock attempt to force it on */ + pci_write_config_byte(pdev, 0x8A, tmpbyte & ~0x20); + break; + case 0x10: + /* 133 already */ + break; + case 0x20: + /* BIOS set PCI x2 clocking */ + break; + } + + pci_read_config_byte(pdev, 0x8A, &tmpbyte); + printk(KERN_INFO "sil680: BA5_EN = %d clock = %02X\n", + tmpbyte & 1, tmpbyte & 0x30); + if ((tmpbyte & 0x30) == 0) + port_info[0] = port_info[1] = &info_slow; + + pci_write_config_byte(pdev, 0xA1, 0x72); + pci_write_config_word(pdev, 0xA2, 0x328A); + pci_write_config_dword(pdev, 0xA4, 0x62DD62DD); + pci_write_config_dword(pdev, 0xA8, 0x43924392); + pci_write_config_dword(pdev, 0xAC, 0x40094009); + pci_write_config_byte(pdev, 0xB1, 0x72); + pci_write_config_word(pdev, 0xB2, 0x328A); + pci_write_config_dword(pdev, 0xB4, 0x62DD62DD); + pci_write_config_dword(pdev, 0xB8, 0x43924392); + pci_write_config_dword(pdev, 0xBC, 0x40094009); + + switch(tmpbyte & 0x30) { + case 0x00: printk(KERN_INFO "sil680: 100MHz clock.\n");break; + case 0x10: printk(KERN_INFO "sil680: 133MHz clock.\n");break; + case 0x20: printk(KERN_INFO "sil680: Using PCI clock.\n");break; + /* This last case is _NOT_ ok */ + case 0x30: printk(KERN_ERR "sil680: Clock disabled ?\n"); + return -EIO; + } + return ata_pci_init_one(pdev, port_info, 2); +} + +static const struct pci_device_id sil680[] = { + { PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680), }, + { 0, }, +}; + +static struct pci_driver sil680_pci_driver = { + .name = DRV_NAME, + .id_table = sil680, + .probe = sil680_init_one, + .remove = ata_pci_remove_one +}; + +static int __init sil680_init(void) +{ + return pci_register_driver(&sil680_pci_driver); +} + + +static void __exit sil680_exit(void) +{ + pci_unregister_driver(&sil680_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for SI680 PATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sil680); +MODULE_VERSION(DRV_VERSION); + +module_init(sil680_init); +module_exit(sil680_exit); diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c new file mode 100644 index 00000000000..4ad7fb44bfa --- /dev/null +++ b/drivers/ata/pata_sis.c @@ -0,0 +1,1030 @@ +/* + * pata_sis.c - SiS ATA driver + * + * (C) 2005 Red Hat + * + * Based upon linux/drivers/ide/pci/sis5513.c + * Copyright (C) 1999-2000 Andre Hedrick + * Copyright (C) 2002 Lionel Bouton , Maintainer + * Copyright (C) 2003 Vojtech Pavlik + * SiS Taiwan : for direct support and hardware. + * Daniela Engert : for initial ATA100 advices and numerous others. + * John Fremlin, Manfred Spraul, Dave Morgan, Peter Kjellerstedt : + * for checking code correctness, providing patches. + * Original tests and design on the SiS620 chipset. + * ATA100 tests and design on the SiS735 chipset. + * ATA16/33 support from specs + * ATA133 support for SiS961/962 by L.C. Chang + * + * + * TODO + * Check MWDMA on drives that don't support MWDMA speed pio cycles ? + * More Testing + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_sis" +#define DRV_VERSION "0.4.2" + +struct sis_chipset { + u16 device; /* PCI host ID */ + struct ata_port_info *info; /* Info block */ + /* Probably add family, cable detect type etc here to clean + up code later */ +}; + +/** + * sis_port_base - return PCI configuration base for dev + * @adev: device + * + * Returns the base of the PCI configuration registers for this port + * number. + */ + +static int sis_port_base(struct ata_device *adev) +{ + return 0x40 + (4 * adev->ap->port_no) + (2 * adev->devno); +} + +/** + * sis_133_pre_reset - check for 40/80 pin + * @ap: Port + * + * Perform cable detection for the later UDMA133 capable + * SiS chipset. + */ + +static int sis_133_pre_reset(struct ata_port *ap) +{ + static const struct pci_bits sis_enable_bits[] = { + { 0x4aU, 1U, 0x02UL, 0x02UL }, /* port 0 */ + { 0x4aU, 1U, 0x04UL, 0x04UL }, /* port 1 */ + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u16 tmp; + + if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + /* The top bit of this register is the cable detect bit */ + pci_read_config_word(pdev, 0x50 + 2 * ap->port_no, &tmp); + if (tmp & 0x8000) + ap->cbl = ATA_CBL_PATA40; + else + ap->cbl = ATA_CBL_PATA80; + + return ata_std_prereset(ap); +} + +/** + * sis_error_handler - Probe specified port on PATA host controller + * @ap: Port to probe + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_133_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, sis_133_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + + +/** + * sis_66_pre_reset - check for 40/80 pin + * @ap: Port + * + * Perform cable detection on the UDMA66, UDMA100 and early UDMA133 + * SiS IDE controllers. + */ + +static int sis_66_pre_reset(struct ata_port *ap) +{ + static const struct pci_bits sis_enable_bits[] = { + { 0x4aU, 1U, 0x02UL, 0x02UL }, /* port 0 */ + { 0x4aU, 1U, 0x04UL, 0x04UL }, /* port 1 */ + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 tmp; + + if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + /* Older chips keep cable detect in bits 4/5 of reg 0x48 */ + pci_read_config_byte(pdev, 0x48, &tmp); + tmp >>= ap->port_no; + if (tmp & 0x10) + ap->cbl = ATA_CBL_PATA40; + else + ap->cbl = ATA_CBL_PATA80; + + return ata_std_prereset(ap); +} + +/** + * sis_66_error_handler - Probe specified port on PATA host controller + * @ap: Port to probe + * @classes: + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_66_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, sis_66_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * sis_old_pre_reset - probe begin + * @ap: ATA port + * + * Set up cable type and use generic probe init + */ + +static int sis_old_pre_reset(struct ata_port *ap) +{ + static const struct pci_bits sis_enable_bits[] = { + { 0x4aU, 1U, 0x02UL, 0x02UL }, /* port 0 */ + { 0x4aU, 1U, 0x04UL, 0x04UL }, /* port 1 */ + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + + +/** + * sis_old_error_handler - Probe specified port on PATA host controller + * @ap: Port to probe + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_old_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, sis_old_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * sis_set_fifo - Set RWP fifo bits for this device + * @ap: Port + * @adev: Device + * + * SIS chipsets implement prefetch/postwrite bits for each device + * on both channels. This functionality is not ATAPI compatible and + * must be configured according to the class of device present + */ + +static void sis_set_fifo(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 fifoctrl; + u8 mask = 0x11; + + mask <<= (2 * ap->port_no); + mask <<= adev->devno; + + /* This holds various bits including the FIFO control */ + pci_read_config_byte(pdev, 0x4B, &fifoctrl); + fifoctrl &= ~mask; + + /* Enable for ATA (disk) only */ + if (adev->class == ATA_DEV_ATA) + fifoctrl |= mask; + pci_write_config_byte(pdev, 0x4B, fifoctrl); +} + +/** + * sis_old_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device we are configuring for. + * + * Set PIO mode for device, in host controller PCI config space. This + * function handles PIO set up for all chips that are pre ATA100 and + * also early ATA100 devices. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_old_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = sis_port_base(adev); + u8 t1, t2; + int speed = adev->pio_mode - XFER_PIO_0; + + const u8 active[] = { 0x00, 0x07, 0x04, 0x03, 0x01 }; + const u8 recovery[] = { 0x00, 0x06, 0x04, 0x03, 0x03 }; + + sis_set_fifo(ap, adev); + + pci_read_config_byte(pdev, port, &t1); + pci_read_config_byte(pdev, port + 1, &t2); + + t1 &= ~0x0F; /* Clear active/recovery timings */ + t2 &= ~0x07; + + t1 |= active[speed]; + t2 |= recovery[speed]; + + pci_write_config_byte(pdev, port, t1); + pci_write_config_byte(pdev, port + 1, t2); +} + +/** + * sis_100_set_pioode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device we are configuring for. + * + * Set PIO mode for device, in host controller PCI config space. This + * function handles PIO set up for ATA100 devices and early ATA133. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_100_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = sis_port_base(adev); + int speed = adev->pio_mode - XFER_PIO_0; + + const u8 actrec[] = { 0x00, 0x67, 0x44, 0x33, 0x31 }; + + sis_set_fifo(ap, adev); + + pci_write_config_byte(pdev, port, actrec[speed]); +} + +/** + * sis_133_set_pioode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device we are configuring for. + * + * Set PIO mode for device, in host controller PCI config space. This + * function handles PIO set up for the later ATA133 devices. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = 0x40; + u32 t1; + u32 reg54; + int speed = adev->pio_mode - XFER_PIO_0; + + const u32 timing133[] = { + 0x28269000, /* Recovery << 24 | Act << 16 | Ini << 12 */ + 0x0C266000, + 0x04263000, + 0x0C0A3000, + 0x05093000 + }; + const u32 timing100[] = { + 0x1E1C6000, /* Recovery << 24 | Act << 16 | Ini << 12 */ + 0x091C4000, + 0x031C2000, + 0x09072000, + 0x04062000 + }; + + sis_set_fifo(ap, adev); + + /* If bit 14 is set then the registers are mapped at 0x70 not 0x40 */ + pci_read_config_dword(pdev, 0x54, ®54); + if (reg54 & 0x40000000) + port = 0x70; + port += 8 * ap->port_no + 4 * adev->devno; + + pci_read_config_dword(pdev, port, &t1); + t1 &= 0xC0C00FFF; /* Mask out timing */ + + if (t1 & 0x08) /* 100 or 133 ? */ + t1 |= timing133[speed]; + else + t1 |= timing100[speed]; + pci_write_config_byte(pdev, port, t1); +} + +/** + * sis_old_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set UDMA/MWDMA mode for device, in host controller PCI config space. + * Handles pre UDMA and UDMA33 devices. Supports MWDMA as well unlike + * the old ide/pci driver. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int speed = adev->dma_mode - XFER_MW_DMA_0; + int drive_pci = sis_port_base(adev); + u16 timing; + + const u16 mwdma_bits[] = { 0x707, 0x202, 0x202 }; + const u16 udma_bits[] = { 0xE000, 0xC000, 0xA000 }; + + pci_read_config_word(pdev, drive_pci, &timing); + + if (adev->dma_mode < XFER_UDMA_0) { + /* bits 3-0 hold recovery timing bits 8-10 active timing and + the higer bits are dependant on the device */ + timing &= ~ 0x870F; + timing |= mwdma_bits[speed]; + pci_write_config_word(pdev, drive_pci, timing); + } else { + /* Bit 15 is UDMA on/off, bit 13-14 are cycle time */ + speed = adev->dma_mode - XFER_UDMA_0; + timing &= ~0x6000; + timing |= udma_bits[speed]; + } +} + +/** + * sis_66_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set UDMA/MWDMA mode for device, in host controller PCI config space. + * Handles UDMA66 and early UDMA100 devices. Supports MWDMA as well unlike + * the old ide/pci driver. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int speed = adev->dma_mode - XFER_MW_DMA_0; + int drive_pci = sis_port_base(adev); + u16 timing; + + const u16 mwdma_bits[] = { 0x707, 0x202, 0x202 }; + const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000}; + + pci_read_config_word(pdev, drive_pci, &timing); + + if (adev->dma_mode < XFER_UDMA_0) { + /* bits 3-0 hold recovery timing bits 8-10 active timing and + the higer bits are dependant on the device, bit 15 udma */ + timing &= ~ 0x870F; + timing |= mwdma_bits[speed]; + } else { + /* Bit 15 is UDMA on/off, bit 12-14 are cycle time */ + speed = adev->dma_mode - XFER_UDMA_0; + timing &= ~0x6000; + timing |= udma_bits[speed]; + } + pci_write_config_word(pdev, drive_pci, timing); +} + +/** + * sis_100_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set UDMA/MWDMA mode for device, in host controller PCI config space. + * Handles UDMA66 and early UDMA100 devices. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_100_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int speed = adev->dma_mode - XFER_MW_DMA_0; + int drive_pci = sis_port_base(adev); + u16 timing; + + const u16 udma_bits[] = { 0x8B00, 0x8700, 0x8500, 0x8300, 0x8200, 0x8100}; + + pci_read_config_word(pdev, drive_pci, &timing); + + if (adev->dma_mode < XFER_UDMA_0) { + /* NOT SUPPORTED YET: NEED DATA SHEET. DITTO IN OLD DRIVER */ + } else { + /* Bit 15 is UDMA on/off, bit 12-14 are cycle time */ + speed = adev->dma_mode - XFER_UDMA_0; + timing &= ~0x0F00; + timing |= udma_bits[speed]; + } + pci_write_config_word(pdev, drive_pci, timing); +} + +/** + * sis_133_early_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set UDMA/MWDMA mode for device, in host controller PCI config space. + * Handles early SiS 961 bridges. Supports MWDMA as well unlike + * the old ide/pci driver. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_133_early_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int speed = adev->dma_mode - XFER_MW_DMA_0; + int drive_pci = sis_port_base(adev); + u16 timing; + + const u16 udma_bits[] = { 0x8F00, 0x8A00, 0x8700, 0x8500, 0x8300, 0x8200, 0x8100}; + + pci_read_config_word(pdev, drive_pci, &timing); + + if (adev->dma_mode < XFER_UDMA_0) { + /* NOT SUPPORTED YET: NEED DATA SHEET. DITTO IN OLD DRIVER */ + } else { + /* Bit 15 is UDMA on/off, bit 12-14 are cycle time */ + speed = adev->dma_mode - XFER_UDMA_0; + timing &= ~0x0F00; + timing |= udma_bits[speed]; + } + pci_write_config_word(pdev, drive_pci, timing); +} + +/** + * sis_133_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set UDMA/MWDMA mode for device, in host controller PCI config space. + * Handles early SiS 961 bridges. Supports MWDMA as well unlike + * the old ide/pci driver. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int speed = adev->dma_mode - XFER_MW_DMA_0; + int port = 0x40; + u32 t1; + u32 reg54; + + /* bits 4- cycle time 8 - cvs time */ + const u32 timing_u100[] = { 0x6B0, 0x470, 0x350, 0x140, 0x120, 0x110, 0x000 }; + const u32 timing_u133[] = { 0x9F0, 0x6A0, 0x470, 0x250, 0x230, 0x220, 0x210 }; + + /* If bit 14 is set then the registers are mapped at 0x70 not 0x40 */ + pci_read_config_dword(pdev, 0x54, ®54); + if (reg54 & 0x40000000) + port = 0x70; + port += (8 * ap->port_no) + (4 * adev->devno); + + pci_read_config_dword(pdev, port, &t1); + + if (adev->dma_mode < XFER_UDMA_0) { + t1 &= ~0x00000004; + /* FIXME: need data sheet to add MWDMA here. Also lacking on + ide/pci driver */ + } else { + speed = adev->dma_mode - XFER_UDMA_0; + /* if & 8 no UDMA133 - need info for ... */ + t1 &= ~0x00000FF0; + t1 |= 0x00000004; + if (t1 & 0x08) + t1 |= timing_u133[speed]; + else + t1 |= timing_u100[speed]; + } + pci_write_config_dword(pdev, port, t1); +} + +static struct scsi_host_template sis_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations sis_133_ops = { + .port_disable = ata_port_disable, + .set_piomode = sis_133_set_piomode, + .set_dmamode = sis_133_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = sis_133_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .eng_timeout = ata_eng_timeout, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + +static const struct ata_port_operations sis_133_early_ops = { + .port_disable = ata_port_disable, + .set_piomode = sis_100_set_piomode, + .set_dmamode = sis_133_early_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = sis_66_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .eng_timeout = ata_eng_timeout, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + +static const struct ata_port_operations sis_100_ops = { + .port_disable = ata_port_disable, + .set_piomode = sis_100_set_piomode, + .set_dmamode = sis_100_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = sis_66_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .eng_timeout = ata_eng_timeout, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + +static const struct ata_port_operations sis_66_ops = { + .port_disable = ata_port_disable, + .set_piomode = sis_old_set_piomode, + .set_dmamode = sis_66_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = sis_66_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .eng_timeout = ata_eng_timeout, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + +static const struct ata_port_operations sis_old_ops = { + .port_disable = ata_port_disable, + .set_piomode = sis_old_set_piomode, + .set_dmamode = sis_old_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = sis_old_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .eng_timeout = ata_eng_timeout, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + +static struct ata_port_info sis_info = { + .sht = &sis_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, + .udma_mask = 0, + .port_ops = &sis_old_ops, +}; +static struct ata_port_info sis_info33 = { + .sht = &sis_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA2, /* UDMA 33 */ + .port_ops = &sis_old_ops, +}; +static struct ata_port_info sis_info66 = { + .sht = &sis_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA4, /* UDMA 66 */ + .port_ops = &sis_66_ops, +}; +static struct ata_port_info sis_info100 = { + .sht = &sis_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA5, + .port_ops = &sis_100_ops, +}; +static struct ata_port_info sis_info100_early = { + .sht = &sis_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .udma_mask = ATA_UDMA5, + .pio_mask = 0x1f, /* pio0-4 */ + .port_ops = &sis_66_ops, +}; +static struct ata_port_info sis_info133 = { + .sht = &sis_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA6, + .port_ops = &sis_133_ops, +}; +static struct ata_port_info sis_info133_early = { + .sht = &sis_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA6, + .port_ops = &sis_133_early_ops, +}; + + +static void sis_fixup(struct pci_dev *pdev, struct sis_chipset *sis) +{ + u16 regw; + u8 reg; + + if (sis->info == &sis_info133) { + pci_read_config_word(pdev, 0x50, ®w); + if (regw & 0x08) + pci_write_config_word(pdev, 0x50, regw & ~0x08); + pci_read_config_word(pdev, 0x52, ®w); + if (regw & 0x08) + pci_write_config_word(pdev, 0x52, regw & ~0x08); + return; + } + + if (sis->info == &sis_info133_early || sis->info == &sis_info100) { + /* Fix up latency */ + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80); + /* Set compatibility bit */ + pci_read_config_byte(pdev, 0x49, ®); + if (!(reg & 0x01)) + pci_write_config_byte(pdev, 0x49, reg | 0x01); + return; + } + + if (sis->info == &sis_info66 || sis->info == &sis_info100_early) { + /* Fix up latency */ + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80); + /* Set compatibility bit */ + pci_read_config_byte(pdev, 0x52, ®); + if (!(reg & 0x04)) + pci_write_config_byte(pdev, 0x52, reg | 0x04); + return; + } + + if (sis->info == &sis_info33) { + pci_read_config_byte(pdev, PCI_CLASS_PROG, ®); + if (( reg & 0x0F ) != 0x00) + pci_write_config_byte(pdev, PCI_CLASS_PROG, reg & 0xF0); + /* Fall through to ATA16 fixup below */ + } + + if (sis->info == &sis_info || sis->info == &sis_info33) { + /* force per drive recovery and active timings + needed on ATA_33 and below chips */ + pci_read_config_byte(pdev, 0x52, ®); + if (!(reg & 0x08)) + pci_write_config_byte(pdev, 0x52, reg|0x08); + return; + } + + BUG(); +} + +/** + * sis_init_one - Register SiS ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in sis_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. We probe for combined mode (sigh), + * and then hand over control to libata, for it to do the rest. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + static struct ata_port_info *port_info[2]; + struct ata_port_info *port; + struct pci_dev *host = NULL; + struct sis_chipset *chipset = NULL; + + static struct sis_chipset sis_chipsets[] = { + { 0x0745, &sis_info100 }, + { 0x0735, &sis_info100 }, + { 0x0733, &sis_info100 }, + { 0x0635, &sis_info100 }, + { 0x0633, &sis_info100 }, + + { 0x0730, &sis_info100_early }, /* 100 with ATA 66 layout */ + { 0x0550, &sis_info100_early }, /* 100 with ATA 66 layout */ + + { 0x0640, &sis_info66 }, + { 0x0630, &sis_info66 }, + { 0x0620, &sis_info66 }, + { 0x0540, &sis_info66 }, + { 0x0530, &sis_info66 }, + + { 0x5600, &sis_info33 }, + { 0x5598, &sis_info33 }, + { 0x5597, &sis_info33 }, + { 0x5591, &sis_info33 }, + { 0x5582, &sis_info33 }, + { 0x5581, &sis_info33 }, + + { 0x5596, &sis_info }, + { 0x5571, &sis_info }, + { 0x5517, &sis_info }, + { 0x5511, &sis_info }, + + {0} + }; + static struct sis_chipset sis133_early = { + 0x0, &sis_info133_early + }; + static struct sis_chipset sis133 = { + 0x0, &sis_info133 + }; + static struct sis_chipset sis100_early = { + 0x0, &sis_info100_early + }; + static struct sis_chipset sis100 = { + 0x0, &sis_info100 + }; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, + "version " DRV_VERSION "\n"); + + /* We have to find the bridge first */ + + for (chipset = &sis_chipsets[0]; chipset->device; chipset++) { + host = pci_get_device(PCI_VENDOR_ID_SI, chipset->device, NULL); + if (host != NULL) { + if (chipset->device == 0x630) { /* SIS630 */ + u8 host_rev; + pci_read_config_byte(host, PCI_REVISION_ID, &host_rev); + if (host_rev >= 0x30) /* 630 ET */ + chipset = &sis100_early; + } + break; + } + } + + /* Look for concealed bridges */ + if (host == NULL) { + /* Second check */ + u32 idemisc; + u16 trueid; + + /* Disable ID masking and register remapping then + see what the real ID is */ + + pci_read_config_dword(pdev, 0x54, &idemisc); + pci_write_config_dword(pdev, 0x54, idemisc & 0x7fffffff); + pci_read_config_word(pdev, PCI_DEVICE_ID, &trueid); + pci_write_config_dword(pdev, 0x54, idemisc); + + switch(trueid) { + case 0x5518: /* SIS 962/963 */ + chipset = &sis133; + if ((idemisc & 0x40000000) == 0) { + pci_write_config_dword(pdev, 0x54, idemisc | 0x40000000); + printk(KERN_INFO "SIS5513: Switching to 5513 register mapping\n"); + } + break; + case 0x0180: /* SIS 965/965L */ + chipset = &sis133; + break; + case 0x1180: /* SIS 966/966L */ + chipset = &sis133; + break; + } + } + + /* Further check */ + if (chipset == NULL) { + struct pci_dev *lpc_bridge; + u16 trueid; + u8 prefctl; + u8 idecfg; + u8 sbrev; + + /* Try the second unmasking technique */ + pci_read_config_byte(pdev, 0x4a, &idecfg); + pci_write_config_byte(pdev, 0x4a, idecfg | 0x10); + pci_read_config_word(pdev, PCI_DEVICE_ID, &trueid); + pci_write_config_byte(pdev, 0x4a, idecfg); + + switch(trueid) { + case 0x5517: + lpc_bridge = pci_get_slot(pdev->bus, 0x10); /* Bus 0 Dev 2 Fn 0 */ + if (lpc_bridge == NULL) + break; + pci_read_config_byte(lpc_bridge, PCI_REVISION_ID, &sbrev); + pci_read_config_byte(pdev, 0x49, &prefctl); + pci_dev_put(lpc_bridge); + + if (sbrev == 0x10 && (prefctl & 0x80)) { + chipset = &sis133_early; + break; + } + chipset = &sis100; + break; + } + } + pci_dev_put(host); + + /* No chipset info, no support */ + if (chipset == NULL) + return -ENODEV; + + port = chipset->info; + port->private_data = chipset; + + sis_fixup(pdev, chipset); + + port_info[0] = port_info[1] = port; + return ata_pci_init_one(pdev, port_info, 2); +} + +static const struct pci_device_id sis_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x5513), }, /* SiS 5513 */ + { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x5518), }, /* SiS 5518 */ + { } +}; + +static struct pci_driver sis_pci_driver = { + .name = DRV_NAME, + .id_table = sis_pci_tbl, + .probe = sis_init_one, + .remove = ata_pci_remove_one, +}; + +static int __init sis_init(void) +{ + return pci_register_driver(&sis_pci_driver); +} + +static void __exit sis_exit(void) +{ + pci_unregister_driver(&sis_pci_driver); +} + + +module_init(sis_init); +module_exit(sis_exit); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for SiS ATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sis_pci_tbl); +MODULE_VERSION(DRV_VERSION); + diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c new file mode 100644 index 00000000000..47b290b5604 --- /dev/null +++ b/drivers/ata/pata_sl82c105.c @@ -0,0 +1,388 @@ +/* + * pata_sl82c105.c - SL82C105 PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox + * + * Based in part on linux/drivers/ide/pci/sl82c105.c + * SL82C105/Winbond 553 IDE driver + * + * and in part on the documentation and errata sheet + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_sl82c105" +#define DRV_VERSION "0.2.2" + +enum { + /* + * SL82C105 PCI config register 0x40 bits. + */ + CTRL_IDE_IRQB = (1 << 30), + CTRL_IDE_IRQA = (1 << 28), + CTRL_LEGIRQ = (1 << 11), + CTRL_P1F16 = (1 << 5), + CTRL_P1EN = (1 << 4), + CTRL_P0F16 = (1 << 1), + CTRL_P0EN = (1 << 0) +}; + +/** + * sl82c105_pre_reset - probe begin + * @ap: ATA port + * + * Set up cable type and use generic probe init + */ + +static int sl82c105_pre_reset(struct ata_port *ap) +{ + static const struct pci_bits sl82c105_enable_bits[] = { + { 0x40, 1, 0x01, 0x01 }, + { 0x40, 1, 0x10, 0x10 } + }; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (ap->port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->port_no])) { + ata_port_disable(ap); + dev_printk(KERN_INFO, &pdev->dev, "port disabled. ignoring.\n"); + return 0; + } + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + + +static void sl82c105_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, sl82c105_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + + +/** + * sl82c105_configure_piomode - set chip PIO timing + * @ap: ATA interface + * @adev: ATA device + * @pio: PIO mode + * + * Called to do the PIO mode setup. Our timing registers are shared + * so a configure_dmamode call will undo any work we do here and vice + * versa + */ + +static void sl82c105_configure_piomode(struct ata_port *ap, struct ata_device *adev, int pio) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static u16 pio_timing[5] = { + 0x50D, 0x407, 0x304, 0x242, 0x240 + }; + u16 dummy; + int timing = 0x44 + (8 * ap->port_no) + (4 * adev->devno); + + pci_write_config_word(pdev, timing, pio_timing[pio]); + /* Can we lose this oddity of the old driver */ + pci_read_config_word(pdev, timing, &dummy); +} + +/** + * sl82c105_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. Our timing registers are shared + * but we want to set the PIO timing by default. + */ + +static void sl82c105_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + sl82c105_configure_piomode(ap, adev, adev->pio_mode - XFER_PIO_0); +} + +/** + * sl82c105_configure_dmamode - set DMA mode in chip + * @ap: ATA interface + * @adev: ATA device + * + * Load DMA cycle times into the chip ready for a DMA transfer + * to occur. + */ + +static void sl82c105_configure_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static u16 dma_timing[3] = { + 0x707, 0x201, 0x200 + }; + u16 dummy; + int timing = 0x44 + (8 * ap->port_no) + (4 * adev->devno); + int dma = adev->dma_mode - XFER_MW_DMA_0; + + pci_write_config_word(pdev, timing, dma_timing[dma]); + /* Can we lose this oddity of the old driver */ + pci_read_config_word(pdev, timing, &dummy); +} + +/** + * sl82c105_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the DMA mode setup. This replaces the PIO timings + * for the device in question. Set appropriate PIO timings not DMA + * timings at this point. + */ + +static void sl82c105_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + switch(adev->dma_mode) { + case XFER_MW_DMA_0: + sl82c105_configure_piomode(ap, adev, 1); + break; + case XFER_MW_DMA_1: + sl82c105_configure_piomode(ap, adev, 3); + break; + case XFER_MW_DMA_2: + sl82c105_configure_piomode(ap, adev, 3); + break; + default: + BUG(); + } +} + +/** + * sl82c105_reset_engine - Reset the DMA engine + * @ap: ATA interface + * + * The sl82c105 has some serious problems with the DMA engine + * when transfers don't run as expected or ATAPI is used. The + * recommended fix is to reset the engine each use using a chip + * test register. + */ + +static void sl82c105_reset_engine(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u16 val; + + pci_read_config_word(pdev, 0x7E, &val); + pci_write_config_word(pdev, 0x7E, val | 4); + pci_write_config_word(pdev, 0x7E, val & ~4); +} + +/** + * sl82c105_bmdma_start - DMA engine begin + * @qc: ATA command + * + * Reset the DMA engine each use as recommended by the errata + * document. + * + * FIXME: if we switch clock at BMDMA start/end we might get better + * PIO performance on DMA capable devices. + */ + +static void sl82c105_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + sl82c105_reset_engine(ap); + + /* Set the clocks for DMA */ + sl82c105_configure_dmamode(ap, qc->dev); + /* Activate DMA */ + ata_bmdma_start(qc); +} + +/** + * sl82c105_bmdma_end - DMA engine stop + * @qc: ATA command + * + * Reset the DMA engine each use as recommended by the errata + * document. + * + * This function is also called to turn off DMA when a timeout occurs + * during DMA operation. In both cases we need to reset the engine, + * so no actual eng_timeout handler is required. + * + * We assume bmdma_stop is always called if bmdma_start as called. If + * not then we may need to wrap qc_issue. + */ + +static void sl82c105_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + ata_bmdma_stop(qc); + sl82c105_reset_engine(ap); + + /* This will redo the initial setup of the DMA device to matching + PIO timings */ + sl82c105_set_dmamode(ap, qc->dev); +} + +static struct scsi_host_template sl82c105_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations sl82c105_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = sl82c105_set_piomode, + .set_dmamode = sl82c105_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .error_handler = sl82c105_error_handler, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = sl82c105_bmdma_start, + .bmdma_stop = sl82c105_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * sl82c105_bridge_revision - find bridge version + * @pdev: PCI device for the ATA function + * + * Locates the PCI bridge associated with the ATA function and + * providing it is a Winbond 553 reports the revision. If it cannot + * find a revision or the right device it returns -1 + */ + +static int sl82c105_bridge_revision(struct pci_dev *pdev) +{ + struct pci_dev *bridge; + u8 rev; + + /* + * The bridge should be part of the same device, but function 0. + */ + bridge = pci_get_slot(pdev->bus, + PCI_DEVFN(PCI_SLOT(pdev->devfn), 0)); + if (!bridge) + return -1; + + /* + * Make sure it is a Winbond 553 and is an ISA bridge. + */ + if (bridge->vendor != PCI_VENDOR_ID_WINBOND || + bridge->device != PCI_DEVICE_ID_WINBOND_83C553 || + bridge->class >> 8 != PCI_CLASS_BRIDGE_ISA) { + pci_dev_put(bridge); + return -1; + } + /* + * We need to find function 0's revision, not function 1 + */ + pci_read_config_byte(bridge, PCI_REVISION_ID, &rev); + + pci_dev_put(bridge); + return rev; +} + + +static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info_dma = { + .sht = &sl82c105_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &sl82c105_port_ops + }; + static struct ata_port_info info_early = { + .sht = &sl82c105_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .port_ops = &sl82c105_port_ops + }; + static struct ata_port_info *port_info[2] = { &info_early, &info_early }; + u32 val; + int rev; + + rev = sl82c105_bridge_revision(dev); + + if (rev == -1) + dev_printk(KERN_WARNING, &dev->dev, "pata_sl82c105: Unable to find bridge, disabling DMA.\n"); + else if (rev <= 5) + dev_printk(KERN_WARNING, &dev->dev, "pata_sl82c105: Early bridge revision, no DMA available.\n"); + else { + port_info[0] = &info_dma; + port_info[1] = &info_dma; + } + + pci_read_config_dword(dev, 0x40, &val); + val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16; + pci_write_config_dword(dev, 0x40, val); + + + return ata_pci_init_one(dev, port_info, 1); /* For now */ +} + +static struct pci_device_id sl82c105[] = { + { PCI_DEVICE(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105), }, + { 0, }, +}; + +static struct pci_driver sl82c105_pci_driver = { + .name = DRV_NAME, + .id_table = sl82c105, + .probe = sl82c105_init_one, + .remove = ata_pci_remove_one +}; + +static int __init sl82c105_init(void) +{ + return pci_register_driver(&sl82c105_pci_driver); +} + + +static void __exit sl82c105_exit(void) +{ + pci_unregister_driver(&sl82c105_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Sl82c105"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sl82c105); +MODULE_VERSION(DRV_VERSION); + +module_init(sl82c105_init); +module_exit(sl82c105_exit); diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c new file mode 100644 index 00000000000..7dd6ea3a21e --- /dev/null +++ b/drivers/ata/pata_triflex.c @@ -0,0 +1,285 @@ +/* + * pata_triflex.c - Compaq PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox + * + * based upon + * + * triflex.c + * + * IDE Chipset driver for the Compaq TriFlex IDE controller. + * + * Known to work with the Compaq Workstation 5x00 series. + * + * Copyright (C) 2002 Hewlett-Packard Development Group, L.P. + * Author: Torben Mathiasen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Loosely based on the piix & svwks drivers. + * + * Documentation: + * Not publically available. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_triflex" +#define DRV_VERSION "0.2.5" + +/** + * triflex_probe_init - probe begin + * @ap: ATA port + * + * Set up cable type and use generic probe init + */ + +static int triflex_probe_init(struct ata_port *ap) +{ + static const struct pci_bits triflex_enable_bits[] = { + { 0x80, 1, 0x01, 0x01 }, + { 0x80, 1, 0x02, 0x02 } + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (!pci_test_config_bits(pdev, &triflex_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + + + +static void triflex_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, triflex_probe_init, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * triflex_load_timing - timing configuration + * @ap: ATA interface + * @adev: Device on the bus + * @speed: speed to configure + * + * The Triflex has one set of timings per device per channel. This + * means we must do some switching. As the PIO and DMA timings don't + * match we have to do some reloading unlike PIIX devices where tuning + * tricks can avoid it. + */ + +static void triflex_load_timing(struct ata_port *ap, struct ata_device *adev, int speed) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 timing = 0; + u32 triflex_timing, old_triflex_timing; + int channel_offset = ap->port_no ? 0x74: 0x70; + unsigned int is_slave = (adev->devno != 0); + + + pci_read_config_dword(pdev, channel_offset, &old_triflex_timing); + triflex_timing = old_triflex_timing; + + switch(speed) + { + case XFER_MW_DMA_2: + timing = 0x0103;break; + case XFER_MW_DMA_1: + timing = 0x0203;break; + case XFER_MW_DMA_0: + timing = 0x0808;break; + case XFER_SW_DMA_2: + case XFER_SW_DMA_1: + case XFER_SW_DMA_0: + timing = 0x0F0F;break; + case XFER_PIO_4: + timing = 0x0202;break; + case XFER_PIO_3: + timing = 0x0204;break; + case XFER_PIO_2: + timing = 0x0404;break; + case XFER_PIO_1: + timing = 0x0508;break; + case XFER_PIO_0: + timing = 0x0808;break; + default: + BUG(); + } + triflex_timing &= ~ (0xFFFF << (16 * is_slave)); + triflex_timing |= (timing << (16 * is_slave)); + + if (triflex_timing != old_triflex_timing) + pci_write_config_dword(pdev, channel_offset, triflex_timing); +} + +/** + * triflex_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Use the timing loader to set up the PIO mode. We have to do this + * because DMA start/stop will only be called once DMA occurs. If there + * has been no DMA then the PIO timings are still needed. + */ +static void triflex_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + triflex_load_timing(ap, adev, adev->pio_mode); +} + +/** + * triflex_dma_start - DMA start callback + * @qc: Command in progress + * + * Usually drivers set the DMA timing at the point the set_dmamode call + * is made. Triflex however requires we load new timings on the + * transition or keep matching PIO/DMA pairs (ie MWDMA2/PIO4 etc). + * We load the DMA timings just before starting DMA and then restore + * the PIO timing when the DMA is finished. + */ + +static void triflex_bmdma_start(struct ata_queued_cmd *qc) +{ + triflex_load_timing(qc->ap, qc->dev, qc->dev->dma_mode); + ata_bmdma_start(qc); +} + +/** + * triflex_dma_stop - DMA stop callback + * @ap: ATA interface + * @adev: ATA device + * + * We loaded new timings in dma_start, as a result we need to restore + * the PIO timings in dma_stop so that the next command issue gets the + * right clock values. + */ + +static void triflex_bmdma_stop(struct ata_queued_cmd *qc) +{ + ata_bmdma_stop(qc); + triflex_load_timing(qc->ap, qc->dev, qc->dev->pio_mode); +} + +static struct scsi_host_template triflex_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations triflex_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = triflex_set_piomode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = triflex_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = triflex_bmdma_start, + .bmdma_stop = triflex_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .sht = &triflex_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &triflex_port_ops + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + static int printed_version; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n"); + + return ata_pci_init_one(dev, port_info, 2); +} + +static const struct pci_device_id triflex[] = { + { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0, }, +}; + +static struct pci_driver triflex_pci_driver = { + .name = DRV_NAME, + .id_table = triflex, + .probe = triflex_init_one, + .remove = ata_pci_remove_one +}; + +static int __init triflex_init(void) +{ + return pci_register_driver(&triflex_pci_driver); +} + + +static void __exit triflex_exit(void) +{ + pci_unregister_driver(&triflex_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Compaq Triflex"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, triflex); +MODULE_VERSION(DRV_VERSION); + +module_init(triflex_init); +module_exit(triflex_exit); diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c new file mode 100644 index 00000000000..2580e1606d9 --- /dev/null +++ b/drivers/ata/pata_via.c @@ -0,0 +1,568 @@ +/* + * pata_via.c - VIA PATA for new ATA layer + * (C) 2005-2006 Red Hat Inc + * Alan Cox + * + * Documentation + * Most chipset documentation available under NDA only + * + * VIA version guide + * VIA VT82C561 - early design, uses ata_generic currently + * VIA VT82C576 - MWDMA, 33Mhz + * VIA VT82C586 - MWDMA, 33Mhz + * VIA VT82C586a - Added UDMA to 33Mhz + * VIA VT82C586b - UDMA33 + * VIA VT82C596a - Nonfunctional UDMA66 + * VIA VT82C596b - Working UDMA66 + * VIA VT82C686 - Nonfunctional UDMA66 + * VIA VT82C686a - Working UDMA66 + * VIA VT82C686b - Updated to UDMA100 + * VIA VT8231 - UDMA100 + * VIA VT8233 - UDMA100 + * VIA VT8233a - UDMA133 + * VIA VT8233c - UDMA100 + * VIA VT8235 - UDMA133 + * VIA VT8237 - UDMA133 + * + * Most registers remain compatible across chips. Others start reserved + * and acquire sensible semantics if set to 1 (eg cable detect). A few + * exceptions exist, notably around the FIFO settings. + * + * One additional quirk of the VIA design is that like ALi they use few + * PCI IDs for a lot of chips. + * + * Based heavily on: + * + * Version 3.38 + * + * VIA IDE driver for Linux. Supported southbridges: + * + * vt82c576, vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b, + * vt82c686, vt82c686a, vt82c686b, vt8231, vt8233, vt8233c, vt8233a, + * vt8235, vt8237 + * + * Copyright (c) 2000-2002 Vojtech Pavlik + * + * Based on the work of: + * Michel Aubry + * Jeff Garzik + * Andre Hedrick + + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_via" +#define DRV_VERSION "0.1.13" + +/* + * The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx + * driver. + */ + +enum { + VIA_UDMA = 0x007, + VIA_UDMA_NONE = 0x000, + VIA_UDMA_33 = 0x001, + VIA_UDMA_66 = 0x002, + VIA_UDMA_100 = 0x003, + VIA_UDMA_133 = 0x004, + VIA_BAD_PREQ = 0x010, /* Crashes if PREQ# till DDACK# set */ + VIA_BAD_CLK66 = 0x020, /* 66 MHz clock doesn't work correctly */ + VIA_SET_FIFO = 0x040, /* Needs to have FIFO split set */ + VIA_NO_UNMASK = 0x080, /* Doesn't work with IRQ unmasking on */ + VIA_BAD_ID = 0x100, /* Has wrong vendor ID (0x1107) */ + VIA_BAD_AST = 0x200, /* Don't touch Address Setup Timing */ + VIA_NO_ENABLES = 0x400, /* Has no enablebits */ +}; + +/* + * VIA SouthBridge chips. + */ + +static const struct via_isa_bridge { + const char *name; + u16 id; + u8 rev_min; + u8 rev_max; + u16 flags; +} via_isa_bridges[] = { + { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, + { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES}, + { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, + { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, + { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, + { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, + { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, VIA_UDMA_100 }, + { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, VIA_UDMA_100 }, + { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, VIA_UDMA_100 }, + { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, VIA_UDMA_100 }, + { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, VIA_UDMA_66 }, + { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 }, + { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, VIA_UDMA_66 }, + { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 }, + { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, VIA_UDMA_33 | VIA_SET_FIFO }, + { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, VIA_UDMA_33 | VIA_SET_FIFO | VIA_BAD_PREQ }, + { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, VIA_UDMA_33 | VIA_SET_FIFO }, + { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, VIA_UDMA_33 | VIA_SET_FIFO }, + { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO }, + { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK }, + { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, + { NULL } +}; + +/** + * via_cable_detect - cable detection + * @ap: ATA port + * + * Perform cable detection. Actually for the VIA case the BIOS + * already did this for us. We read the values provided by the + * BIOS. If you are using an 8235 in a non-PC configuration you + * may need to update this code. + * + * Hotplug also impacts on this. + */ + +static int via_cable_detect(struct ata_port *ap) { + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 ata66; + + pci_read_config_dword(pdev, 0x50, &ata66); + /* Check both the drive cable reporting bits, we might not have + two drives */ + if (ata66 & (0x10100000 >> (16 * ap->port_no))) + return ATA_CBL_PATA80; + else + return ATA_CBL_PATA40; +} + +static int via_pre_reset(struct ata_port *ap) +{ + const struct via_isa_bridge *config = ap->host->private_data; + + if (!(config->flags & VIA_NO_ENABLES)) { + static const struct pci_bits via_enable_bits[] = { + { 0x40, 1, 0x02, 0x02 }, + { 0x40, 1, 0x01, 0x01 } + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (!pci_test_config_bits(pdev, &via_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + } + + if ((config->flags & VIA_UDMA) >= VIA_UDMA_66) + ap->cbl = via_cable_detect(ap); + else + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + + +/** + * via_error_handler - reset for VIA chips + * @ap: ATA port + * + * Handle the reset callback for the later chips with cable detect + */ + +static void via_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, via_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * via_do_set_mode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * @mode: ATA mode being programmed + * @tdiv: Clocks per PCI clock + * @set_ast: Set to program address setup + * @udma_type: UDMA mode/format of registers + * + * Program the VIA registers for DMA and PIO modes. Uses the ata timing + * support in order to compute modes. + * + * FIXME: Hotplug will require we serialize multiple mode changes + * on the two channels. + */ + +static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mode, int tdiv, int set_ast, int udma_type) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct ata_device *peer = ata_dev_pair(adev); + struct ata_timing t, p; + static int via_clock = 33333; /* Bus clock in kHZ - ought to be tunable one day */ + unsigned long T = 1000000000 / via_clock; + unsigned long UT = T/tdiv; + int ut; + int offset = 3 - (2*ap->port_no) - adev->devno; + + + /* Calculate the timing values we require */ + ata_timing_compute(adev, mode, &t, T, UT); + + /* We share 8bit timing so we must merge the constraints */ + if (peer) { + if (peer->pio_mode) { + ata_timing_compute(peer, peer->pio_mode, &p, T, UT); + ata_timing_merge(&p, &t, &t, ATA_TIMING_8BIT); + } + } + + /* Address setup is programmable but breaks on UDMA133 setups */ + if (set_ast) { + u8 setup; /* 2 bits per drive */ + int shift = 2 * offset; + + pci_read_config_byte(pdev, 0x4C, &setup); + setup &= ~(3 << shift); + setup |= FIT(t.setup, 1, 4) << shift; /* 1,4 or 1,4 - 1 FIXME */ + pci_write_config_byte(pdev, 0x4C, setup); + } + + /* Load the PIO mode bits */ + pci_write_config_byte(pdev, 0x4F - ap->port_no, + ((FIT(t.act8b, 1, 16) - 1) << 4) | (FIT(t.rec8b, 1, 16) - 1)); + pci_write_config_byte(pdev, 0x48 + offset, + ((FIT(t.active, 1, 16) - 1) << 4) | (FIT(t.recover, 1, 16) - 1)); + + /* Load the UDMA bits according to type */ + switch(udma_type) { + default: + /* BUG() ? */ + /* fall through */ + case 33: + ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 5) - 2)) : 0x03; + break; + case 66: + ut = t.udma ? (0xe8 | (FIT(t.udma, 2, 9) - 2)) : 0x0f; + break; + case 100: + ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07; + break; + case 133: + ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07; + break; + } + /* Set UDMA unless device is not UDMA capable */ + if (udma_type) + pci_write_config_byte(pdev, 0x50 + offset, ut); +} + +static void via_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + const struct via_isa_bridge *config = ap->host->private_data; + int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1; + int mode = config->flags & VIA_UDMA; + static u8 tclock[5] = { 1, 1, 2, 3, 4 }; + static u8 udma[5] = { 0, 33, 66, 100, 133 }; + + via_do_set_mode(ap, adev, adev->pio_mode, tclock[mode], set_ast, udma[mode]); +} + +static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + const struct via_isa_bridge *config = ap->host->private_data; + int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1; + int mode = config->flags & VIA_UDMA; + static u8 tclock[5] = { 1, 1, 2, 3, 4 }; + static u8 udma[5] = { 0, 33, 66, 100, 133 }; + + via_do_set_mode(ap, adev, adev->dma_mode, tclock[mode], set_ast, udma[mode]); +} + +static struct scsi_host_template via_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations via_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = via_set_piomode, + .set_dmamode = via_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = via_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations via_port_ops_noirq = { + .port_disable = ata_port_disable, + .set_piomode = via_set_piomode, + .set_dmamode = via_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = via_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer_noirq, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * via_init_one - discovery callback + * @pdev: PCI device ID + * @id: PCI table info + * + * A VIA IDE interface has been discovered. Figure out what revision + * and perform configuration work before handing it to the ATA layer + */ + +static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + /* Early VIA without UDMA support */ + static struct ata_port_info via_mwdma_info = { + .sht = &via_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &via_port_ops + }; + /* Ditto with IRQ masking required */ + static struct ata_port_info via_mwdma_info_borked = { + .sht = &via_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &via_port_ops_noirq, + }; + /* VIA UDMA 33 devices (and borked 66) */ + static struct ata_port_info via_udma33_info = { + .sht = &via_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7, + .port_ops = &via_port_ops + }; + /* VIA UDMA 66 devices */ + static struct ata_port_info via_udma66_info = { + .sht = &via_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x1f, + .port_ops = &via_port_ops + }; + /* VIA UDMA 100 devices */ + static struct ata_port_info via_udma100_info = { + .sht = &via_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, + .port_ops = &via_port_ops + }; + /* UDMA133 with bad AST (All current 133) */ + static struct ata_port_info via_udma133_info = { + .sht = &via_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, /* FIXME: should check north bridge */ + .port_ops = &via_port_ops + }; + struct ata_port_info *port_info[2], *type; + struct pci_dev *isa = NULL; + const struct via_isa_bridge *config; + static int printed_version; + u8 t; + u8 enable; + u32 timing; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + + /* To find out how the IDE will behave and what features we + actually have to look at the bridge not the IDE controller */ + for (config = via_isa_bridges; config->id; config++) + if ((isa = pci_get_device(PCI_VENDOR_ID_VIA + + !!(config->flags & VIA_BAD_ID), + config->id, NULL))) { + + pci_read_config_byte(isa, PCI_REVISION_ID, &t); + if (t >= config->rev_min && + t <= config->rev_max) + break; + pci_dev_put(isa); + } + + if (!config->id) { + printk(KERN_WARNING "via: Unknown VIA SouthBridge, disabling.\n"); + return -ENODEV; + } + pci_dev_put(isa); + + /* 0x40 low bits indicate enabled channels */ + pci_read_config_byte(pdev, 0x40 , &enable); + enable &= 3; + if (enable == 0) { + return -ENODEV; + } + + /* Initialise the FIFO for the enabled channels. */ + if (config->flags & VIA_SET_FIFO) { + u8 fifo_setting[4] = {0x00, 0x60, 0x00, 0x20}; + u8 fifo; + + pci_read_config_byte(pdev, 0x43, &fifo); + + /* Clear PREQ# until DDACK# for errata */ + if (config->flags & VIA_BAD_PREQ) + fifo &= 0x7F; + else + fifo &= 0x9f; + /* Turn on FIFO for enabled channels */ + fifo |= fifo_setting[enable]; + pci_write_config_byte(pdev, 0x43, fifo); + } + /* Clock set up */ + switch(config->flags & VIA_UDMA) { + case VIA_UDMA_NONE: + if (config->flags & VIA_NO_UNMASK) + type = &via_mwdma_info_borked; + else + type = &via_mwdma_info; + break; + case VIA_UDMA_33: + type = &via_udma33_info; + break; + case VIA_UDMA_66: + type = &via_udma66_info; + /* The 66 MHz devices require we enable the clock */ + pci_read_config_dword(pdev, 0x50, &timing); + timing |= 0x80008; + pci_write_config_dword(pdev, 0x50, timing); + break; + case VIA_UDMA_100: + type = &via_udma100_info; + break; + case VIA_UDMA_133: + type = &via_udma133_info; + break; + default: + WARN_ON(1); + return -ENODEV; + } + + if (config->flags & VIA_BAD_CLK66) { + /* Disable the 66MHz clock on problem devices */ + pci_read_config_dword(pdev, 0x50, &timing); + timing &= ~0x80008; + pci_write_config_dword(pdev, 0x50, timing); + } + + /* We have established the device type, now fire it up */ + type->private_data = (void *)config; + + port_info[0] = port_info[1] = type; + return ata_pci_init_one(pdev, port_info, 2); +} + +static const struct pci_device_id via[] = { + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576_1), }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1), }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_6410), }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), }, + { 0, }, +}; + +static struct pci_driver via_pci_driver = { + .name = DRV_NAME, + .id_table = via, + .probe = via_init_one, + .remove = ata_pci_remove_one +}; + +static int __init via_init(void) +{ + return pci_register_driver(&via_pci_driver); +} + + +static void __exit via_exit(void) +{ + pci_unregister_driver(&via_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for VIA PATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, via); +MODULE_VERSION(DRV_VERSION); + +module_init(via_init); +module_exit(via_exit); -- cgit v1.2.3 From 9bec2e38527a9f2497b3d976715c672d08d6160d Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 31 Aug 2006 00:02:15 -0400 Subject: [libata] Trim trailing whitespace. --- drivers/ata/ahci.c | 2 +- drivers/ata/pdc_adma.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 3f1106fdaed..1aabc81d82f 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1075,7 +1075,7 @@ static void ahci_host_intr(struct ata_port *ap) return; /* ignore interim PIO setup fis interrupts */ - if (ata_tag_valid(ap->active_tag) && (status & PORT_IRQ_PIOS_FIS)) + if (ata_tag_valid(ap->active_tag) && (status & PORT_IRQ_PIOS_FIS)) return; if (ata_ratelimit()) diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c index 912211ada81..0e23ecb77bc 100644 --- a/drivers/ata/pdc_adma.c +++ b/drivers/ata/pdc_adma.c @@ -497,7 +497,7 @@ static inline unsigned int adma_intr_mmio(struct ata_host *host) continue; DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n", ap->id, qc->tf.protocol, status); - + /* complete taskfile transaction */ pp->state = adma_state_idle; qc->err_mask |= ac_err_mask(status); -- cgit v1.2.3 From 85cd7251b9112e3dabeac9fd3b175601ca607241 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 31 Aug 2006 00:03:49 -0400 Subject: [libata #pata-drivers] Trim trailing whitespace. --- drivers/ata/ata_generic.c | 36 +++++------ drivers/ata/ata_piix.c | 36 +++++------ drivers/ata/pata_ali.c | 4 +- drivers/ata/pata_amd.c | 2 +- drivers/ata/pata_cmd64x.c | 88 ++++++++++++------------- drivers/ata/pata_cypress.c | 32 +++++----- drivers/ata/pata_hpt366.c | 40 ++++++------ drivers/ata/pata_hpt37x.c | 138 ++++++++++++++++++++-------------------- drivers/ata/pata_hpt3x2n.c | 94 +++++++++++++-------------- drivers/ata/pata_hpt3x3.c | 2 +- drivers/ata/pata_it8172.c | 2 +- drivers/ata/pata_it821x.c | 70 ++++++++++---------- drivers/ata/pata_legacy.c | 18 +++--- drivers/ata/pata_netcell.c | 4 +- drivers/ata/pata_optidma.c | 52 +++++++-------- drivers/ata/pata_pcmcia.c | 2 +- drivers/ata/pata_pdc202xx_old.c | 64 +++++++++---------- drivers/ata/pata_qdi.c | 64 +++++++++---------- drivers/ata/pata_radisys.c | 16 ++--- drivers/ata/pata_sc1200.c | 30 ++++----- drivers/ata/pata_serverworks.c | 58 ++++++++--------- drivers/ata/pata_sis.c | 8 +-- drivers/ata/pata_sl82c105.c | 48 +++++++------- drivers/ata/pata_triflex.c | 2 +- drivers/ata/pata_via.c | 2 +- 25 files changed, 456 insertions(+), 456 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index 20b191dcf7e..1d1c30a2fcd 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -2,18 +2,18 @@ * ata_generic.c - Generic PATA/SATA controller driver. * Copyright 2005 Red Hat Inc , all rights reserved. * - * Elements from ide/pci/generic.c + * Elements from ide/pci/generic.c * Copyright (C) 2001-2002 Andre Hedrick * Portions (C) Copyright 2002 Red Hat Inc * * May be copied or modified under the terms of the GNU General Public License - * + * * Driver for PCI IDE interfaces implementing the standard bus mastering * interface functionality. This assumes the BIOS did the drive set up and * tuning for us. By default we do not grab all IDE class devices as they * may have other drivers or need fixups to avoid problems. Instead we keep * a default list of stuff without documentation/driver that appears to - * work. + * work. */ #include @@ -38,7 +38,7 @@ * * Set up cable type and use generic probe init */ - + static int generic_pre_reset(struct ata_port *ap) { ap->cbl = ATA_CBL_PATA80; @@ -55,7 +55,7 @@ static int generic_pre_reset(struct ata_port *ap) * None (inherited from caller). */ - + static void generic_error_handler(struct ata_port *ap) { ata_bmdma_drive_eh(ap, generic_pre_reset, ata_std_softreset, NULL, ata_std_postreset); @@ -68,9 +68,9 @@ static void generic_error_handler(struct ata_port *ap) * Use a non standard set_mode function. We don't want to be tuned. * The BIOS configured everything. Our job is not to fiddle. We * read the dma enabled bits from the PCI configuration of the device - * and respect them. + * and respect them. */ - + static void generic_set_mode(struct ata_port *ap) { int dma_enabled = 0; @@ -79,14 +79,14 @@ static void generic_set_mode(struct ata_port *ap) /* Bits 5 and 6 indicate if DMA is active on master/slave */ if (ap->ioaddr.bmdma_addr) dma_enabled = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - + for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; if (ata_dev_enabled(dev)) { /* We don't really care */ dev->pio_mode = XFER_PIO_0; dev->dma_mode = XFER_MW_DMA_0; - /* We do need the right mode information for DMA or PIO + /* We do need the right mode information for DMA or PIO and this comes from the current configuration flags */ if (dma_enabled & (1 << (5 + i))) { dev->xfer_mode = XFER_MW_DMA_0; @@ -121,7 +121,7 @@ static struct scsi_host_template generic_sht = { static struct ata_port_operations generic_port_ops = { .set_mode = generic_set_mode, - + .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, @@ -133,7 +133,7 @@ static struct ata_port_operations generic_port_ops = { .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, .bmdma_status = ata_bmdma_status, - + .data_xfer = ata_pio_data_xfer, .freeze = ata_bmdma_freeze, @@ -150,8 +150,8 @@ static struct ata_port_operations generic_port_ops = { .port_start = ata_port_start, .port_stop = ata_port_stop, .host_stop = ata_host_stop -}; - +}; + static int all_generic_ide; /* Set to claim all devices */ /** @@ -160,10 +160,10 @@ static int all_generic_ide; /* Set to claim all devices */ * @id: match entry * * Called each time a matching IDE interface is found. We check if the - * interface is one we wish to claim and if so we perform any chip + * interface is one we wish to claim and if so we perform any chip * specific hacks then let the ATA layer do the heavy lifting. */ - + static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id *id) { u16 command; @@ -176,7 +176,7 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id .port_ops = &generic_port_ops }; static struct ata_port_info *port_info[2] = { &info, &info }; - + /* Don't use the generic entry unless instructed to do so */ if (id->driver_data == 1 && all_generic_ide == 0) return -ENODEV; @@ -197,7 +197,7 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id pci_read_config_word(dev, PCI_COMMAND, &command); if (!(command & PCI_COMMAND_IO)) return -ENODEV; - + if (dev->vendor == PCI_VENDOR_ID_AL) ata_pci_clear_simplex(dev); @@ -207,7 +207,7 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id static struct pci_device_id ata_generic[] = { { PCI_DEVICE(PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_SAMURAI_IDE), }, { PCI_DEVICE(PCI_VENDOR_ID_HOLTEK, PCI_DEVICE_ID_HOLTEK_6565), }, - { PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8673F), }, + { PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8673F), }, { PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886A), }, { PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF), }, { PCI_DEVICE(PCI_VENDOR_ID_HINT, PCI_DEVICE_ID_HINT_VXPROII_IDE), }, diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 12b3a42fb35..1a4c03d5de9 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -127,7 +127,7 @@ enum { ich6_sata_ahci = 8, ich6m_sata_ahci = 9, ich8_sata_ahci = 10, - + /* constants for mapping table */ P0 = 0, /* port 0 */ P1 = 1, /* port 1 */ @@ -196,7 +196,7 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x24DB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_133 }, /* C-ICH (i810E2) */ { 0x8086, 0x245B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, - /* ESB (855GME/875P + 6300ESB) UDMA 100 */ + /* ESB (855GME/875P + 6300ESB) UDMA 100 */ { 0x8086, 0x25A2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, /* ICH6 (and 6) (i915) UDMA 100 */ { 0x8086, 0x266F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, @@ -458,7 +458,7 @@ static struct ata_port_info piix_port_info[] = { .udma_mask = ATA_UDMA4, .port_ops = &ich_pata_ops, }, - + /* ich_pata_100: 3 */ { .sht = &piix_sht, @@ -759,7 +759,7 @@ static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev) u8 slave_data; u8 udma_enable; int control = 0; - + /* * See Intel Document 298600-004 for the timing programing rules * for ICH controllers. @@ -777,7 +777,7 @@ static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev) if (ata_pio_need_iordy(adev)) control |= 2; /* IE enable */ - /* Intel specifies that the PPE functionality is for disk only */ + /* Intel specifies that the PPE functionality is for disk only */ if (adev->class == ATA_DEV_ATA) control |= 4; /* PPE enable */ @@ -806,7 +806,7 @@ static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev) /* Ensure the UDMA bit is off - it will be turned back on if UDMA is selected */ - + if (ap->udma_mask) { pci_read_config_byte(dev, 0x48, &udma_enable); udma_enable &= ~(1 << (2 * ap->port_no + adev->devno)); @@ -835,7 +835,7 @@ static void do_pata_set_dmamode (struct ata_port *ap, struct ata_device *adev, i u8 speed = adev->dma_mode; int devid = adev->devno + 2 * ap->port_no; u8 udma_enable; - + static const /* ISP RTC */ u8 timings[][2] = { { 0, 0 }, { 0, 0 }, @@ -851,13 +851,13 @@ static void do_pata_set_dmamode (struct ata_port *ap, struct ata_device *adev, i u16 udma_timing; u16 ideconf; int u_clock, u_speed; - + /* * UDMA is handled by a combination of clock switching and - * selection of dividers - * + * selection of dividers + * * Handy rule: Odd modes are UDMATIMx 01, even are 02 - * except UDMA0 which is 00 + * except UDMA0 which is 00 */ u_speed = min(2 - (udma & 1), udma); if (udma == 5) @@ -866,16 +866,16 @@ static void do_pata_set_dmamode (struct ata_port *ap, struct ata_device *adev, i u_clock = 1; /* 66Mhz */ else u_clock = 0; /* 33Mhz */ - + udma_enable |= (1 << devid); - + /* Load the CT/RP selection */ pci_read_config_word(dev, 0x4A, &udma_timing); udma_timing &= ~(3 << (4 * devid)); udma_timing |= u_speed << (4 * devid); pci_write_config_word(dev, 0x4A, udma_timing); - if (isich) { + if (isich) { /* Select a 33/66/100Mhz clock */ pci_read_config_word(dev, 0x54, &ideconf); ideconf &= ~(0x1001 << devid); @@ -897,12 +897,12 @@ static void do_pata_set_dmamode (struct ata_port *ap, struct ata_device *adev, i XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 }; int pio = needed_pio[mwdma] - XFER_PIO_0; - + control = 3; /* IORDY|TIME1 */ - + /* If the drive MWDMA is faster than it can do PIO then we must force PIO into PIO0 */ - + if (adev->pio_mode < needed_pio[mwdma]) /* Enable DMA timing only */ control |= 8; /* PIO cycles in PIO0 */ @@ -916,7 +916,7 @@ static void do_pata_set_dmamode (struct ata_port *ap, struct ata_device *adev, i slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0); pci_write_config_byte(dev, 0x44, slave_data); } else { /* Master */ - master_data &= 0xCCF4; /* Mask out IORDY|TIME1|DMAONLY + master_data &= 0xCCF4; /* Mask out IORDY|TIME1|DMAONLY and master timing bits */ master_data |= control; master_data |= diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index 0e0415ecfce..8448ee6e0ee 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -184,7 +184,7 @@ static void ali_fifo_control(struct ata_port *ap, struct ata_device *adev, int o /* ATA - FIFO on set nibble to 0x05, ATAPI - FIFO off, set nibble to 0x00. Not all the docs agree but the behaviour we now use is the one stated in the BIOS Programming Guide */ - + pci_read_config_byte(pdev, pio_fifo, &fifo); fifo &= ~(0x0F << shift); if (on) @@ -526,7 +526,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .sht = &ali_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48, .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .mwdma_mask = 0x07, .udma_mask = 0x07, /* UDMA33 */ .port_ops = &ali_20_port_ops }; diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 6ab568428a1..b3f60fdb02d 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -136,7 +136,7 @@ static int amd_pre_reset(struct ata_port *ap) struct pci_dev *pdev = to_pci_dev(ap->host->dev); u8 ata66; - + if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no])) { ata_port_disable(ap); printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c index 03284611a72..abf1bb7bd32 100644 --- a/drivers/ata/pata_cmd64x.c +++ b/drivers/ata/pata_cmd64x.c @@ -20,7 +20,7 @@ * TODO * Testing work */ - + #include #include #include @@ -36,7 +36,7 @@ /* * CMD64x specific registers definition. */ - + enum { CFR = 0x50, CFR_INTR_CH0 = 0x02, @@ -90,9 +90,9 @@ static int cmd648_pre_reset(struct ata_port *ap) pci_read_config_byte(pdev, BMIDECSR, &r); if (r & (1 << ap->port_no)) ap->cbl = ATA_CBL_PATA80; - else + else ap->cbl = ATA_CBL_PATA40; - + return ata_std_prereset(ap); } @@ -113,18 +113,18 @@ static void cmd648_error_handler(struct ata_port *ap) * * Called to do the PIO mode setup. */ - + static void cmd64x_set_piomode(struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); struct ata_timing t; const unsigned long T = 1000000 / 33; const u8 setup_data[] = { 0x40, 0x40, 0x40, 0x80, 0x00 }; - + u8 reg; - + /* Port layout is not logical so use a table */ - const u8 arttim_port[2][2] = { + const u8 arttim_port[2][2] = { { ARTTIM0, ARTTIM1 }, { ARTTIM23, ARTTIM23 } }; @@ -132,11 +132,11 @@ static void cmd64x_set_piomode(struct ata_port *ap, struct ata_device *adev) { DRWTIM0, DRWTIM1 }, { DRWTIM2, DRWTIM3 } }; - + int arttim = arttim_port[ap->port_no][adev->devno]; int drwtim = drwtim_port[ap->port_no][adev->devno]; - - + + if (ata_timing_compute(adev, adev->pio_mode, &t, T, 0) < 0) { printk(KERN_ERR DRV_NAME ": mode computation failed.\n"); return; @@ -144,14 +144,14 @@ static void cmd64x_set_piomode(struct ata_port *ap, struct ata_device *adev) if (ap->port_no) { /* Slave has shared address setup */ struct ata_device *pair = ata_dev_pair(adev); - + if (pair) { struct ata_timing tp; ata_timing_compute(pair, pair->pio_mode, &tp, T, 0); ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP); } } - + printk(KERN_DEBUG DRV_NAME ": active %d recovery %d setup %d.\n", t.active, t.recover, t.setup); if (t.recover > 16) { @@ -160,30 +160,30 @@ static void cmd64x_set_piomode(struct ata_port *ap, struct ata_device *adev) } if (t.active > 16) t.active = 16; - + /* Now convert the clocks into values we can actually stuff into the chip */ - + if (t.recover > 1) t.recover--; else t.recover = 15; - + if (t.setup > 4) t.setup = 0xC0; else t.setup = setup_data[t.setup]; - + t.active &= 0x0F; /* 0 = 16 */ - + /* Load setup timing */ pci_read_config_byte(pdev, arttim, ®); reg &= 0x3F; reg |= t.setup; pci_write_config_byte(pdev, arttim, reg); - + /* Load active/recovery */ - pci_write_config_byte(pdev, drwtim, (t.active << 4) | t.recover); + pci_write_config_byte(pdev, drwtim, (t.active << 4) | t.recover); } /** @@ -193,29 +193,29 @@ static void cmd64x_set_piomode(struct ata_port *ap, struct ata_device *adev) * * Called to do the DMA mode setup. */ - + static void cmd64x_set_dmamode(struct ata_port *ap, struct ata_device *adev) { static const u8 udma_data[] = { 0x31, 0x21, 0x11, 0x25, 0x15, 0x05 }; - static const u8 mwdma_data[] = { + static const u8 mwdma_data[] = { 0x30, 0x20, 0x10 }; - + struct pci_dev *pdev = to_pci_dev(ap->host->dev); u8 regU, regD; int pciU = UDIDETCR0 + 8 * ap->port_no; int pciD = BMIDESR0 + 8 * ap->port_no; int shift = 2 * adev->devno; - + pci_read_config_byte(pdev, pciD, ®D); pci_read_config_byte(pdev, pciU, ®U); regD &= ~(0x20 << shift); regU &= ~(0x35 << shift); - + if (adev->dma_mode >= XFER_UDMA_0) regU |= udma_data[adev->dma_mode - XFER_UDMA_0] << shift; else @@ -241,13 +241,13 @@ static void cmd648_bmdma_stop(struct ata_queued_cmd *qc) u8 dma_intr; int dma_reg = ap->port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0; int dma_mask = ap->port_no ? ARTTIM2 : CFR; - + ata_bmdma_stop(qc); - + pci_read_config_byte(pdev, dma_reg, &dma_intr); pci_write_config_byte(pdev, dma_reg, dma_intr | dma_mask); } - + /** * cmd646r1_dma_stop - DMA stop callback * @qc: Command in progress @@ -259,7 +259,7 @@ static void cmd646r1_bmdma_stop(struct ata_queued_cmd *qc) { ata_bmdma_stop(qc); } - + static struct scsi_host_template cmd64x_sht = { .module = THIS_MODULE, .name = DRV_NAME, @@ -306,11 +306,11 @@ static struct ata_port_operations cmd64x_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, - + .port_start = ata_port_start, .port_stop = ata_port_stop, .host_stop = ata_host_stop -}; +}; static struct ata_port_operations cmd646r1_port_ops = { .port_disable = ata_port_disable, @@ -340,11 +340,11 @@ static struct ata_port_operations cmd646r1_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, - + .port_start = ata_port_start, .port_stop = ata_port_stop, .host_stop = ata_host_stop -}; +}; static struct ata_port_operations cmd648_port_ops = { .port_disable = ata_port_disable, @@ -374,16 +374,16 @@ static struct ata_port_operations cmd648_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, - + .port_start = ata_port_start, .port_stop = ata_port_stop, .host_stop = ata_host_stop -}; - +}; + static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { u32 class_rev; - + static struct ata_port_info cmd_info[6] = { { /* CMD 643 - no UDMA */ .sht = &cmd64x_sht, @@ -433,15 +433,15 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) }; static struct ata_port_info *port_info[2], *info; u8 mrdmode; - + info = &cmd_info[id->driver_data]; - + pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev); class_rev &= 0xFF; - + if (id->driver_data == 0) /* 643 */ ata_pci_clear_simplex(pdev); - + if (pdev->device == PCI_DEVICE_ID_CMD_646) { /* Does UDMA work ? */ if (class_rev > 4) @@ -456,14 +456,14 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) mrdmode &= ~ 0x30; /* IRQ set up */ mrdmode |= 0x02; /* Memory read line enable */ pci_write_config_byte(pdev, MRDMODE, mrdmode); - + /* Force PIO 0 here.. */ - + /* PPC specific fixup copied from old driver */ #ifdef CONFIG_PPC pci_write_config_byte(pdev, UDIDETCR0, 0xF0); #endif - + port_info[0] = port_info[1] = info; return ata_pci_init_one(pdev, port_info, 2); } diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c index 322043d8cf7..fd55474e0d1 100644 --- a/drivers/ata/pata_cypress.c +++ b/drivers/ata/pata_cypress.c @@ -7,7 +7,7 @@ * linux/drivers/ide/pci/cy82c693.c Version 0.40 Sep. 10, 2002 * */ - + #include #include #include @@ -59,7 +59,7 @@ static void cy82c693_error_handler(struct ata_port *ap) * * Called to do the PIO mode setup. */ - + static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); @@ -67,7 +67,7 @@ static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev) const unsigned long T = 1000000 / 33; short time_16, time_8; u32 addr; - + if (ata_timing_compute(adev, adev->pio_mode, &t, T, 1) < 0) { printk(KERN_ERR DRV_NAME ": mome computation failed.\n"); return; @@ -75,20 +75,20 @@ static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev) time_16 = FIT(t.recover, 0, 15) | (FIT(t.active, 0, 15) << 4); time_8 = FIT(t.act8b, 0, 15) | (FIT(t.rec8b, 0, 15) << 4); - + if (adev->devno == 0) { pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr); - + addr &= ~0x0F; /* Mask bits */ addr |= FIT(t.setup, 0, 15); - + pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr); pci_write_config_byte(pdev, CY82_IDE_MASTER_IOR, time_16); pci_write_config_byte(pdev, CY82_IDE_MASTER_IOW, time_16); pci_write_config_byte(pdev, CY82_IDE_MASTER_8BIT, time_8); } else { pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr); - + addr &= ~0xF0; /* Mask bits */ addr |= (FIT(t.setup, 0, 15) << 4); @@ -106,15 +106,15 @@ static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev) * * Called to do the DMA mode setup. */ - + static void cy82c693_set_dmamode(struct ata_port *ap, struct ata_device *adev) { int reg = CY82_INDEX_CHANNEL0 + ap->port_no; - + /* Be afraid, be very afraid. Magic registers in low I/O space */ outb(reg, 0x22); outb(adev->dma_mode - XFER_MW_DMA_0, 0x23); - + /* 0x50 gives the best behaviour on the Alpha's using this chip */ outb(CY82_INDEX_TIMEOUT, 0x22); outb(0x50, 0x23); @@ -143,7 +143,7 @@ static struct ata_port_operations cy82c693_port_ops = { .set_piomode = cy82c693_set_piomode, .set_dmamode = cy82c693_set_dmamode, .mode_filter = ata_pci_default_filter, - + .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -167,11 +167,11 @@ static struct ata_port_operations cy82c693_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, - + .port_start = ata_port_start, .port_stop = ata_port_stop, .host_stop = ata_host_stop -}; +}; static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { @@ -183,13 +183,13 @@ static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *i .port_ops = &cy82c693_port_ops }; static struct ata_port_info *port_info[1] = { &info }; - + /* Devfn 1 is the ATA primary. The secondary is magic and on devfn2. For the moment we don't handle the secondary. FIXME */ - + if (PCI_FUNC(pdev->devfn) != 1) return -ENODEV; - + return ata_pci_init_one(pdev, port_info, 1); } diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index e54a0c51681..94bb1dfc3f1 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -168,7 +168,7 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, cons while(list[i] != NULL) { if (!strncmp(list[i], s, len)) { - printk(KERN_WARNING DRV_NAME ": %s is not supported for %s.\n", + printk(KERN_WARNING DRV_NAME ": %s is not supported for %s.\n", modestr, list[i]); return 1; } @@ -184,7 +184,7 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, cons * * Block UDMA on devices that cause trouble with this controller. */ - + static unsigned long hpt366_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask) { if (adev->class == ATA_DEV_ATA) { @@ -206,11 +206,11 @@ static unsigned long hpt366_filter(const struct ata_port *ap, struct ata_device * Return the 32bit register programming information for this channel * that matches the speed provided. */ - + static u32 hpt36x_find_mode(struct ata_port *ap, int speed) { struct hpt_clock *clocks = ap->host->private_data; - + while(clocks->xfer_speed) { if (clocks->xfer_speed == speed) return clocks->timing; @@ -219,12 +219,12 @@ static u32 hpt36x_find_mode(struct ata_port *ap, int speed) BUG(); return 0xffffffffU; /* silence compiler warning */ } - + static int hpt36x_pre_reset(struct ata_port *ap) { u8 ata66; struct pci_dev *pdev = to_pci_dev(ap->host->dev); - + pci_read_config_byte(pdev, 0x5A, &ata66); if (ata66 & (1 << ap->port_no)) ap->cbl = ATA_CBL_PATA40; @@ -239,7 +239,7 @@ static int hpt36x_pre_reset(struct ata_port *ap) * * Perform the reset handling for the 366/368 */ - + static void hpt36x_error_handler(struct ata_port *ap) { ata_bmdma_drive_eh(ap, hpt36x_pre_reset, ata_std_softreset, NULL, ata_std_postreset); @@ -250,9 +250,9 @@ static void hpt36x_error_handler(struct ata_port *ap) * @ap: ATA interface * @adev: device on the interface * - * Perform PIO mode setup. + * Perform PIO mode setup. */ - + static void hpt366_set_piomode(struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); @@ -263,14 +263,14 @@ static void hpt366_set_piomode(struct ata_port *ap, struct ata_device *adev) addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); addr2 = 0x51 + 4 * ap->port_no; - + /* Fast interrupt prediction disable, hold off interrupt disable */ pci_read_config_byte(pdev, addr2, &fast); if (fast & 0x80) { fast &= ~0x80; pci_write_config_byte(pdev, addr2, fast); } - + pci_read_config_dword(pdev, addr1, ®); mode = hpt36x_find_mode(ap, adev->pio_mode); mode &= ~0x8000000; /* No FIFO in PIO */ @@ -287,7 +287,7 @@ static void hpt366_set_piomode(struct ata_port *ap, struct ata_device *adev) * Set up the channel for MWDMA or UDMA modes. Much the same as with * PIO, load the mode number and then set MWDMA or UDMA flag. */ - + static void hpt366_set_dmamode(struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); @@ -298,14 +298,14 @@ static void hpt366_set_dmamode(struct ata_port *ap, struct ata_device *adev) addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); addr2 = 0x51 + 4 * ap->port_no; - + /* Fast interrupt prediction disable, hold off interrupt disable */ pci_read_config_byte(pdev, addr2, &fast); if (fast & 0x80) { fast &= ~0x80; pci_write_config_byte(pdev, addr2, fast); } - + pci_read_config_dword(pdev, addr1, ®); mode = hpt36x_find_mode(ap, adev->dma_mode); mode |= 0x8000000; /* FIFO in MWDMA or UDMA */ @@ -335,13 +335,13 @@ static struct scsi_host_template hpt36x_sht = { /* * Configuration for HPT366/68 */ - + static struct ata_port_operations hpt366_port_ops = { .port_disable = ata_port_disable, .set_piomode = hpt366_set_piomode, .set_dmamode = hpt366_set_dmamode, .mode_filter = hpt366_filter, - + .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -369,7 +369,7 @@ static struct ata_port_operations hpt366_port_ops = { .port_start = ata_port_start, .port_stop = ata_port_stop, .host_stop = ata_host_stop -}; +}; /** * hpt36x_init_one - Initialise an HPT366/368 @@ -391,7 +391,7 @@ static struct ata_port_operations hpt366_port_ops = { * HPT37x/30x 4 (HPT366) 3+ Other driver * */ - + static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static struct ata_port_info info_hpt366 = { @@ -410,7 +410,7 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); class_rev &= 0xFF; - + /* May be a later chip in disguise. Check */ /* Newer chips are not in the HPT36x driver. Ignore them */ if (class_rev > 2) @@ -426,7 +426,7 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) pci_write_config_byte(dev, 0x51, drive_fast & ~0x80); pci_read_config_dword(dev, 0x40, ®1); - + /* PCI clocking determines the ATA timing values to use */ /* info_hpt366 is safe against re-entry so we can scribble on it */ switch(reg1 & 0x700) { diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 7c3da53f1e0..532a7928f80 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -134,7 +134,7 @@ static const struct hpt_clock hpt370a_timings_66[] = { { XFER_UDMA_0, 0x14a0e73f }, { XFER_MW_DMA_2, 0x2480fa73 }, - { XFER_MW_DMA_1, 0x2480fa77 }, + { XFER_MW_DMA_1, 0x2480fa77 }, { XFER_MW_DMA_0, 0x2480fb3f }, { XFER_PIO_4, 0x0c82be73 }, @@ -333,11 +333,11 @@ static const struct hpt_chip hpt374 = { * Return the 32bit register programming information for this channel * that matches the speed provided. */ - + static u32 hpt37x_find_mode(struct ata_port *ap, int speed) { struct hpt_clock *clocks = ap->host->private_data; - + while(clocks->xfer_speed) { if (clocks->xfer_speed == speed) return clocks->timing; @@ -367,7 +367,7 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, cons while(list[i] != NULL) { if (!strncmp(list[i], s, len)) { - printk(KERN_WARNING DRV_NAME ": %s is not supported for %s.\n", + printk(KERN_WARNING DRV_NAME ": %s is not supported for %s.\n", modestr, list[i]); return 1; } @@ -413,7 +413,7 @@ static const char *bad_ata100_5[] = { * * Block UDMA on devices that cause trouble with this controller. */ - + static unsigned long hpt370_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask) { if (adev->class != ATA_DEV_ATA) { @@ -432,7 +432,7 @@ static unsigned long hpt370_filter(const struct ata_port *ap, struct ata_device * * Block UDMA on devices that cause trouble with this controller. */ - + static unsigned long hpt370a_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask) { if (adev->class != ATA_DEV_ATA) { @@ -441,36 +441,36 @@ static unsigned long hpt370a_filter(const struct ata_port *ap, struct ata_device } return ata_pci_default_filter(ap, adev, mask); } - + /** * hpt37x_pre_reset - reset the hpt37x bus * @ap: ATA port to reset * * Perform the initial reset handling for the 370/372 and 374 func 0 */ - + static int hpt37x_pre_reset(struct ata_port *ap) { u8 scr2, ata66; struct pci_dev *pdev = to_pci_dev(ap->host->dev); - + pci_read_config_byte(pdev, 0x5B, &scr2); pci_write_config_byte(pdev, 0x5B, scr2 & ~0x01); /* Cable register now active */ pci_read_config_byte(pdev, 0x5A, &ata66); /* Restore state */ pci_write_config_byte(pdev, 0x5B, scr2); - + if (ata66 & (1 << ap->port_no)) ap->cbl = ATA_CBL_PATA40; else ap->cbl = ATA_CBL_PATA80; /* Reset the state machine */ - pci_write_config_byte(pdev, 0x50, 0x37); - pci_write_config_byte(pdev, 0x54, 0x37); + pci_write_config_byte(pdev, 0x50, 0x37); + pci_write_config_byte(pdev, 0x54, 0x37); udelay(100); - + return ata_std_prereset(ap); } @@ -480,7 +480,7 @@ static int hpt37x_pre_reset(struct ata_port *ap) * * Perform probe for HPT37x, except for HPT374 channel 2 */ - + static void hpt37x_error_handler(struct ata_port *ap) { ata_bmdma_drive_eh(ap, hpt37x_pre_reset, ata_std_softreset, NULL, ata_std_postreset); @@ -490,7 +490,7 @@ static int hpt374_pre_reset(struct ata_port *ap) { u16 mcr3, mcr6; u8 ata66; - + struct pci_dev *pdev = to_pci_dev(ap->host->dev); /* Do the extra channel work */ pci_read_config_word(pdev, 0x52, &mcr3); @@ -504,17 +504,17 @@ static int hpt374_pre_reset(struct ata_port *ap) /* Reset TCBLID/FCBLID to output */ pci_write_config_word(pdev, 0x52, mcr3); pci_write_config_word(pdev, 0x56, mcr6); - + if (ata66 & (1 << ap->port_no)) ap->cbl = ATA_CBL_PATA40; else ap->cbl = ATA_CBL_PATA80; /* Reset the state machine */ - pci_write_config_byte(pdev, 0x50, 0x37); - pci_write_config_byte(pdev, 0x54, 0x37); + pci_write_config_byte(pdev, 0x50, 0x37); + pci_write_config_byte(pdev, 0x54, 0x37); udelay(100); - + return ata_std_prereset(ap); } @@ -526,11 +526,11 @@ static int hpt374_pre_reset(struct ata_port *ap) * channels. The function 0 channels work like usual but function 1 * is special */ - + static void hpt374_error_handler(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); - + if (!(PCI_FUNC(pdev->devfn) & 1)) hpt37x_error_handler(ap); else @@ -542,9 +542,9 @@ static void hpt374_error_handler(struct ata_port *ap) * @ap: ATA interface * @adev: device on the interface * - * Perform PIO mode setup. + * Perform PIO mode setup. */ - + static void hpt370_set_piomode(struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); @@ -555,13 +555,13 @@ static void hpt370_set_piomode(struct ata_port *ap, struct ata_device *adev) addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); addr2 = 0x51 + 4 * ap->port_no; - + /* Fast interrupt prediction disable, hold off interrupt disable */ pci_read_config_byte(pdev, addr2, &fast); fast &= ~0x02; fast |= 0x01; pci_write_config_byte(pdev, addr2, fast); - + pci_read_config_dword(pdev, addr1, ®); mode = hpt37x_find_mode(ap, adev->pio_mode); mode &= ~0x8000000; /* No FIFO in PIO */ @@ -578,7 +578,7 @@ static void hpt370_set_piomode(struct ata_port *ap, struct ata_device *adev) * Set up the channel for MWDMA or UDMA modes. Much the same as with * PIO, load the mode number and then set MWDMA or UDMA flag. */ - + static void hpt370_set_dmamode(struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); @@ -589,13 +589,13 @@ static void hpt370_set_dmamode(struct ata_port *ap, struct ata_device *adev) addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); addr2 = 0x51 + 4 * ap->port_no; - + /* Fast interrupt prediction disable, hold off interrupt disable */ pci_read_config_byte(pdev, addr2, &fast); fast &= ~0x02; fast |= 0x01; pci_write_config_byte(pdev, addr2, fast); - + pci_read_config_dword(pdev, addr1, ®); mode = hpt37x_find_mode(ap, adev->dma_mode); mode |= 0x8000000; /* FIFO in MWDMA or UDMA */ @@ -611,7 +611,7 @@ static void hpt370_set_dmamode(struct ata_port *ap, struct ata_device *adev) * The 370 and 370A want us to reset the DMA engine each time we * use it. The 372 and later are fine. */ - + static void hpt370_bmdma_start(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; @@ -627,7 +627,7 @@ static void hpt370_bmdma_start(struct ata_queued_cmd *qc) * * Work around the HPT370 DMA engine. */ - + static void hpt370_bmdma_stop(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; @@ -635,7 +635,7 @@ static void hpt370_bmdma_stop(struct ata_queued_cmd *qc) u8 dma_stat = inb(ap->ioaddr.bmdma_addr + 2); u8 dma_cmd; unsigned long bmdma = ap->ioaddr.bmdma_addr; - + if (dma_stat & 0x01) { udelay(20); dma_stat = inb(bmdma + 2); @@ -662,9 +662,9 @@ static void hpt370_bmdma_stop(struct ata_queued_cmd *qc) * @ap: ATA interface * @adev: device on the interface * - * Perform PIO mode setup. + * Perform PIO mode setup. */ - + static void hpt372_set_piomode(struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); @@ -675,15 +675,15 @@ static void hpt372_set_piomode(struct ata_port *ap, struct ata_device *adev) addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); addr2 = 0x51 + 4 * ap->port_no; - + /* Fast interrupt prediction disable, hold off interrupt disable */ pci_read_config_byte(pdev, addr2, &fast); fast &= ~0x07; pci_write_config_byte(pdev, addr2, fast); - + pci_read_config_dword(pdev, addr1, ®); mode = hpt37x_find_mode(ap, adev->pio_mode); - + printk("Find mode for %d reports %X\n", adev->pio_mode, mode); mode &= ~0x80000000; /* No FIFO in PIO */ mode &= ~0x30070000; /* Leave config bits alone */ @@ -699,7 +699,7 @@ static void hpt372_set_piomode(struct ata_port *ap, struct ata_device *adev) * Set up the channel for MWDMA or UDMA modes. Much the same as with * PIO, load the mode number and then set MWDMA or UDMA flag. */ - + static void hpt372_set_dmamode(struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); @@ -710,12 +710,12 @@ static void hpt372_set_dmamode(struct ata_port *ap, struct ata_device *adev) addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); addr2 = 0x51 + 4 * ap->port_no; - + /* Fast interrupt prediction disable, hold off interrupt disable */ pci_read_config_byte(pdev, addr2, &fast); fast &= ~0x07; pci_write_config_byte(pdev, addr2, fast); - + pci_read_config_dword(pdev, addr1, ®); mode = hpt37x_find_mode(ap, adev->dma_mode); printk("Find mode for DMA %d reports %X\n", adev->dma_mode, mode); @@ -731,14 +731,14 @@ static void hpt372_set_dmamode(struct ata_port *ap, struct ata_device *adev) * * Clean up after the HPT372 and later DMA engine */ - + static void hpt37x_bmdma_stop(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); int mscreg = 0x50 + 2 * ap->port_no; u8 bwsr_stat, msc_stat; - + pci_read_config_byte(pdev, 0x6A, &bwsr_stat); pci_read_config_byte(pdev, mscreg, &msc_stat); if (bwsr_stat & (1 << ap->port_no)) @@ -768,13 +768,13 @@ static struct scsi_host_template hpt37x_sht = { /* * Configuration for HPT370 */ - + static struct ata_port_operations hpt370_port_ops = { .port_disable = ata_port_disable, .set_piomode = hpt370_set_piomode, .set_dmamode = hpt370_set_dmamode, .mode_filter = hpt370_filter, - + .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -802,18 +802,18 @@ static struct ata_port_operations hpt370_port_ops = { .port_start = ata_port_start, .port_stop = ata_port_stop, .host_stop = ata_host_stop -}; +}; /* * Configuration for HPT370A. Close to 370 but less filters */ - + static struct ata_port_operations hpt370a_port_ops = { .port_disable = ata_port_disable, .set_piomode = hpt370_set_piomode, .set_dmamode = hpt370_set_dmamode, .mode_filter = hpt370a_filter, - + .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -841,19 +841,19 @@ static struct ata_port_operations hpt370a_port_ops = { .port_start = ata_port_start, .port_stop = ata_port_stop, .host_stop = ata_host_stop -}; +}; /* * Configuration for HPT372, HPT371, HPT302. Slightly different PIO * and DMA mode setting functionality. */ - + static struct ata_port_operations hpt372_port_ops = { .port_disable = ata_port_disable, .set_piomode = hpt372_set_piomode, .set_dmamode = hpt372_set_dmamode, .mode_filter = ata_pci_default_filter, - + .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -881,19 +881,19 @@ static struct ata_port_operations hpt372_port_ops = { .port_start = ata_port_start, .port_stop = ata_port_stop, .host_stop = ata_host_stop -}; +}; /* * Configuration for HPT374. Mode setting works like 372 and friends * but we have a different cable detection procedure. */ - + static struct ata_port_operations hpt374_port_ops = { .port_disable = ata_port_disable, .set_piomode = hpt372_set_piomode, .set_dmamode = hpt372_set_dmamode, .mode_filter = ata_pci_default_filter, - + .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -921,7 +921,7 @@ static struct ata_port_operations hpt374_port_ops = { .port_start = ata_port_start, .port_stop = ata_port_stop, .host_stop = ata_host_stop -}; +}; /** * htp37x_clock_slot - Turn timing to PC clock entry @@ -931,7 +931,7 @@ static struct ata_port_operations hpt374_port_ops = { * Turn the timing data intoa clock slot (0 for 33, 1 for 40, 2 for 50 * and 3 for 66Mhz) */ - + static int hpt37x_clock_slot(unsigned int freq, unsigned int base) { unsigned int f = (base * freq) / 192; /* Mhz */ @@ -946,7 +946,7 @@ static int hpt37x_clock_slot(unsigned int freq, unsigned int base) /** * hpt37x_calibrate_dpll - Calibrate the DPLL loop - * @dev: PCI device + * @dev: PCI device * * Perform a calibration cycle on the HPT37x DPLL. Returns 1 if this * succeeds @@ -957,7 +957,7 @@ static int hpt37x_calibrate_dpll(struct pci_dev *dev) u8 reg5b; u32 reg5c; int tries; - + for(tries = 0; tries < 0x5000; tries++) { udelay(50); pci_read_config_byte(dev, 0x5b, ®5b); @@ -1009,7 +1009,7 @@ static int hpt37x_calibrate_dpll(struct pci_dev *dev) * * (1) UDMA133 support depends on the bus clock */ - + static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) { /* HPT370 - UDMA100 */ @@ -1072,7 +1072,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); class_rev &= 0xFF; - + if (dev->device == PCI_DEVICE_ID_TTI_HPT366) { /* May be a later chip in disguise. Check */ /* Older chips are in the HPT366 driver. Ignore them */ @@ -1082,7 +1082,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) if (class_rev == 6) return -ENODEV; - switch(class_rev) { + switch(class_rev) { case 3: port = &info_hpt370; chip_table = &hpt370; @@ -1147,16 +1147,16 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) * state on reset when PDIAG is a input. */ - pci_write_config_byte(dev, 0x5b, 0x23); - + pci_write_config_byte(dev, 0x5b, 0x23); + pci_read_config_dword(dev, 0x70, &freq); if ((freq >> 12) != 0xABCDE) { int i; u8 sr; u32 total = 0; - + printk(KERN_WARNING "pata_hpt37x: BIOS has not set timing clocks.\n"); - + /* This is the process the HPT371 BIOS is reported to use */ for(i = 0; i < 128; i++) { pci_read_config_byte(dev, 0x78, &sr); @@ -1166,12 +1166,12 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) freq = total / 128; } freq &= 0x1FF; - + /* * Turn the frequency check into a band and then find a timing * table to match it. */ - + clock_slot = hpt37x_clock_slot(freq, chip_table->base); if (chip_table->clocks[clock_slot] == NULL) { /* @@ -1180,7 +1180,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) unsigned int f_low = (MHz[clock_slot] * chip_table->base) / 192; unsigned int f_high = f_low + 2; int adjust; - + for(adjust = 0; adjust < 8; adjust++) { if (hpt37x_calibrate_dpll(dev)) break; @@ -1197,7 +1197,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) } /* Check if this works for all cases */ port->private_data = (void *)hpt370_timings_66; - + printk(KERN_INFO "hpt37x: Bus clock %dMHz, using DPLL.\n", MHz[clock_slot]); } else { port->private_data = (void *)chip_table->clocks[clock_slot]; @@ -1205,7 +1205,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) * Perform a final fixup. The 371 and 372 clock determines * if UDMA133 is available. */ - + if (clock_slot == 2 && chip_table == &hpt372) { /* 50Mhz */ printk(KERN_WARNING "pata_hpt37x: No UDMA133 support available with 50MHz bus clock.\n"); if (port == &info_hpt372) @@ -1214,7 +1214,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) } printk(KERN_INFO "hpt37x: %s: Bus clock %dMHz.\n", chip_table->name, MHz[clock_slot]); } - port_info[0] = port_info[1] = port; + port_info[0] = port_info[1] = port; /* Now kick off ATA set up */ return ata_pci_init_one(dev, port_info, 2); } diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index 40fcda62c7a..06c8db079b9 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -65,7 +65,7 @@ struct hpt_chip { * PIO. * 31 FIFO enable. */ - + /* 66MHz DPLL clocks */ static struct hpt_clock hpt3x2n_clocks[] = { @@ -100,11 +100,11 @@ static struct hpt_clock hpt3x2n_clocks[] = { * is hard coded but easy to change. This will be needed if we use * different DPLLs */ - + static u32 hpt3x2n_find_mode(struct ata_port *ap, int speed) { struct hpt_clock *clocks = hpt3x2n_clocks; - + while(clocks->xfer_speed) { if (clocks->xfer_speed == speed) return clocks->timing; @@ -121,52 +121,52 @@ static u32 hpt3x2n_find_mode(struct ata_port *ap, int speed) * Perform the initial reset handling for the 3x2n series controllers. * Reset the hardware and state machine, obtain the cable type. */ - + static int hpt3xn_pre_reset(struct ata_port *ap) { u8 scr2, ata66; struct pci_dev *pdev = to_pci_dev(ap->host->dev); - + pci_read_config_byte(pdev, 0x5B, &scr2); pci_write_config_byte(pdev, 0x5B, scr2 & ~0x01); /* Cable register now active */ pci_read_config_byte(pdev, 0x5A, &ata66); /* Restore state */ pci_write_config_byte(pdev, 0x5B, scr2); - + if (ata66 & (1 << ap->port_no)) ap->cbl = ATA_CBL_PATA40; else ap->cbl = ATA_CBL_PATA80; /* Reset the state machine */ - pci_write_config_byte(pdev, 0x50, 0x37); - pci_write_config_byte(pdev, 0x54, 0x37); + pci_write_config_byte(pdev, 0x50, 0x37); + pci_write_config_byte(pdev, 0x54, 0x37); udelay(100); return ata_std_prereset(ap); } - + /** * hpt3x2n_error_handler - probe the hpt3x2n bus * @ap: ATA port to reset * * Perform the probe reset handling for the 3x2N */ - + static void hpt3x2n_error_handler(struct ata_port *ap) { ata_bmdma_drive_eh(ap, hpt3xn_pre_reset, ata_std_softreset, NULL, ata_std_postreset); } - + /** * hpt3x2n_set_piomode - PIO setup * @ap: ATA interface * @adev: device on the interface * - * Perform PIO mode setup. + * Perform PIO mode setup. */ - + static void hpt3x2n_set_piomode(struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); @@ -177,12 +177,12 @@ static void hpt3x2n_set_piomode(struct ata_port *ap, struct ata_device *adev) addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); addr2 = 0x51 + 4 * ap->port_no; - + /* Fast interrupt prediction disable, hold off interrupt disable */ pci_read_config_byte(pdev, addr2, &fast); fast &= ~0x07; pci_write_config_byte(pdev, addr2, fast); - + pci_read_config_dword(pdev, addr1, ®); mode = hpt3x2n_find_mode(ap, adev->pio_mode); mode &= ~0x8000000; /* No FIFO in PIO */ @@ -199,7 +199,7 @@ static void hpt3x2n_set_piomode(struct ata_port *ap, struct ata_device *adev) * Set up the channel for MWDMA or UDMA modes. Much the same as with * PIO, load the mode number and then set MWDMA or UDMA flag. */ - + static void hpt3x2n_set_dmamode(struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); @@ -210,12 +210,12 @@ static void hpt3x2n_set_dmamode(struct ata_port *ap, struct ata_device *adev) addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); addr2 = 0x51 + 4 * ap->port_no; - + /* Fast interrupt prediction disable, hold off interrupt disable */ pci_read_config_byte(pdev, addr2, &fast); fast &= ~0x07; pci_write_config_byte(pdev, addr2, fast); - + pci_read_config_dword(pdev, addr1, ®); mode = hpt3x2n_find_mode(ap, adev->dma_mode); mode |= 0x8000000; /* FIFO in MWDMA or UDMA */ @@ -230,14 +230,14 @@ static void hpt3x2n_set_dmamode(struct ata_port *ap, struct ata_device *adev) * * Clean up after the HPT3x2n and later DMA engine */ - + static void hpt3x2n_bmdma_stop(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); int mscreg = 0x50 + 2 * ap->port_no; u8 bwsr_stat, msc_stat; - + pci_read_config_byte(pdev, 0x6A, &bwsr_stat); pci_read_config_byte(pdev, mscreg, &msc_stat); if (bwsr_stat & (1 << ap->port_no)) @@ -257,29 +257,29 @@ static void hpt3x2n_bmdma_stop(struct ata_queued_cmd *qc) * - writing * - second channel UDMA7 (SATA ports) or higher * - 66MHz PCI - * + * * or we will underclock the device and get reduced performance. */ - + static void hpt3x2n_set_clock(struct ata_port *ap, int source) { unsigned long bmdma = ap->ioaddr.bmdma_addr; - + /* Tristate the bus */ outb(0x80, bmdma+0x73); outb(0x80, bmdma+0x77); - + /* Switch clock and reset channels */ outb(source, bmdma+0x7B); outb(0xC0, bmdma+0x79); - + /* Reset state machines */ outb(0x37, bmdma+0x70); outb(0x37, bmdma+0x74); - + /* Complete reset */ outb(0x00, bmdma+0x79); - + /* Reconnect channels to bus */ outb(0x00, bmdma+0x73); outb(0x00, bmdma+0x77); @@ -291,7 +291,7 @@ static int hpt3x2n_pair_idle(struct ata_port *ap) { struct ata_host *host = ap->host; struct ata_port *pair = host->ports[ap->port_no ^ 1]; - + if (pair->hsm_task_state == HSM_ST_IDLE) return 1; return 0; @@ -305,7 +305,7 @@ static int hpt3x2n_use_dpll(struct ata_port *ap, int reading) return USE_DPLL; /* Needed for write */ if (flags & PCI66) return USE_DPLL; /* Needed at 66Mhz */ - return 0; + return 0; } static unsigned int hpt3x2n_qc_issue_prot(struct ata_queued_cmd *qc) @@ -313,7 +313,7 @@ static unsigned int hpt3x2n_qc_issue_prot(struct ata_queued_cmd *qc) struct ata_taskfile *tf = &qc->tf; struct ata_port *ap = qc->ap; int flags = (long)ap->host->private_data; - + if (hpt3x2n_pair_idle(ap)) { int dpll = hpt3x2n_use_dpll(ap, (tf->flags & ATA_TFLAG_WRITE)); if ((flags & USE_DPLL) != dpll) { @@ -347,13 +347,13 @@ static struct scsi_host_template hpt3x2n_sht = { /* * Configuration for HPT3x2n. */ - + static struct ata_port_operations hpt3x2n_port_ops = { .port_disable = ata_port_disable, .set_piomode = hpt3x2n_set_piomode, .set_dmamode = hpt3x2n_set_dmamode, .mode_filter = ata_pci_default_filter, - + .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -381,11 +381,11 @@ static struct ata_port_operations hpt3x2n_port_ops = { .port_start = ata_port_start, .port_stop = ata_port_stop, .host_stop = ata_host_stop -}; +}; /** * hpt3xn_calibrate_dpll - Calibrate the DPLL loop - * @dev: PCI device + * @dev: PCI device * * Perform a calibration cycle on the HPT3xN DPLL. Returns 1 if this * succeeds @@ -396,7 +396,7 @@ static int hpt3xn_calibrate_dpll(struct pci_dev *dev) u8 reg5b; u32 reg5c; int tries; - + for(tries = 0; tries < 0x5000; tries++) { udelay(50); pci_read_config_byte(dev, 0x5b, ®5b); @@ -422,16 +422,16 @@ static int hpt3x2n_pci_clock(struct pci_dev *pdev) { unsigned long freq; u32 fcnt; - + pci_read_config_dword(pdev, 0x70/*CHECKME*/, &fcnt); if ((fcnt >> 12) != 0xABCDE) { printk(KERN_WARNING "hpt3xn: BIOS clock data not set.\n"); return 33; /* Not BIOS set */ } fcnt &= 0x1FF; - + freq = (fcnt * 77) / 192; - + /* Clamp to bands */ if (freq < 40) return 33; @@ -471,7 +471,7 @@ static int hpt3x2n_pci_clock(struct pci_dev *pdev) * * To pin down HPT371N */ - + static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) { /* HPT372N and friends - UDMA133 */ @@ -488,14 +488,14 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) u8 irqmask; u32 class_rev; - + unsigned int pci_mhz; unsigned int f_low, f_high; int adjust; - + pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); class_rev &= 0xFF; - + switch(dev->device) { case PCI_DEVICE_ID_TTI_HPT366: if (class_rev < 6) @@ -530,16 +530,16 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* Tune the PLL. HPT recommend using 75 for SATA, 66 for UDMA133 or 50 for UDMA100. Right now we always use 66 */ - + pci_mhz = hpt3x2n_pci_clock(dev); - + f_low = (pci_mhz * 48) / 66; /* PCI Mhz for 66Mhz DPLL */ f_high = f_low + 2; /* Tolerance */ - + pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low | 0x100); /* PLL clock */ pci_write_config_byte(dev, 0x5B, 0x21); - + /* Unlike the 37x we don't try jiggling the frequency */ for(adjust = 0; adjust < 8; adjust++) { if (hpt3xn_calibrate_dpll(dev)) @@ -554,7 +554,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) port->private_data = NULL; if (pci_mhz > 60) port->private_data = (void *)PCI66; - + /* Now kick off ATA set up */ port_info[0] = port_info[1] = port; return ata_pci_init_one(dev, port_info, 2); diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c index c93406ebf6e..152770133ab 100644 --- a/drivers/ata/pata_hpt3x3.c +++ b/drivers/ata/pata_hpt3x3.c @@ -12,7 +12,7 @@ * May be copied or modified under the terms of the GNU General Public * License */ - + #include #include #include diff --git a/drivers/ata/pata_it8172.c b/drivers/ata/pata_it8172.c index f8367191fc7..53d35bb6fcf 100644 --- a/drivers/ata/pata_it8172.c +++ b/drivers/ata/pata_it8172.c @@ -58,7 +58,7 @@ static int it8172_pre_reset(struct ata_port *ap) }; struct pci_dev *pdev = to_pci_dev(ap->host->dev); - + if (ap->port_no && !pci_test_config_bits(pdev, &it8172_enable_bits[ap->port_no])) { ata_port_disable(ap); printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index c8a7798f8ce..af39097d808 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -6,7 +6,7 @@ * based upon * * it821x.c - * + * * linux/drivers/ide/pci/it821x.c Version 0.09 December 2004 * * Copyright (C) 2004 Red Hat @@ -118,7 +118,7 @@ static int it8212_noraid; * * Set the cable type */ - + static int it821x_pre_reset(struct ata_port *ap) { ap->cbl = ATA_CBL_PATA80; @@ -131,7 +131,7 @@ static int it821x_pre_reset(struct ata_port *ap) * * Set the cable type and trigger a probe */ - + static void it821x_error_handler(struct ata_port *ap) { return ata_bmdma_drive_eh(ap, it821x_pre_reset, ata_std_softreset, NULL, ata_std_postreset); @@ -286,7 +286,7 @@ static void it821x_passthru_set_piomode(struct ata_port *ap, struct ata_device * struct it821x_dev *itdev = ap->private_data; int unit = adev->devno; int mode_wanted = adev->pio_mode - XFER_PIO_0; - + /* We prefer 66Mhz clock for PIO 0-3, don't care for PIO4 */ itdev->want[unit][1] = pio_want[mode_wanted]; itdev->want[unit][0] = 1; /* PIO is lowest priority */ @@ -301,7 +301,7 @@ static void it821x_passthru_set_piomode(struct ata_port *ap, struct ata_device * * @adev: ATA device * * Set up the DMA modes. The actions taken depend heavily on the mode - * to use. If UDMA is used as is hopefully the usual case then the + * to use. If UDMA is used as is hopefully the usual case then the * timing register is private and we need only consider the clock. If * we are using MWDMA then we have to manage the setting ourself as * we switch devices and mode. @@ -322,7 +322,7 @@ static void it821x_passthru_set_dmamode(struct ata_port *ap, struct ata_device * if (adev->dma_mode >= XFER_UDMA_0) { int mode_wanted = adev->dma_mode - XFER_UDMA_0; - + itdev->want[unit][1] = udma_want[mode_wanted]; itdev->want[unit][0] = 3; /* UDMA is high priority */ itdev->mwdma[unit] = MWDMA_OFF; @@ -341,7 +341,7 @@ static void it821x_passthru_set_dmamode(struct ata_port *ap, struct ata_device * it821x_program_udma(ap, adev, itdev->udma[unit]); } else { int mode_wanted = adev->dma_mode - XFER_MW_DMA_0; - + itdev->want[unit][1] = mwdma_want[mode_wanted]; itdev->want[unit][0] = 2; /* MWDMA is low priority */ itdev->mwdma[unit] = dma[mode_wanted]; @@ -363,7 +363,7 @@ static void it821x_passthru_set_dmamode(struct ata_port *ap, struct ata_device * * @qc: Command in progress * * Usually drivers set the DMA timing at the point the set_dmamode call - * is made. IT821x however requires we load new timings on the + * is made. IT821x however requires we load new timings on the * transitions in some cases. */ @@ -410,7 +410,7 @@ static void it821x_passthru_bmdma_stop(struct ata_queued_cmd *qc) * * Device selection hook. If neccessary perform clock switching */ - + static void it821x_passthru_dev_select(struct ata_port *ap, unsigned int device) { @@ -431,7 +431,7 @@ static void it821x_passthru_dev_select(struct ata_port *ap, * perform out own device selection timing loads before the * usual happenings kick off */ - + static unsigned int it821x_smart_qc_issue_prot(struct ata_queued_cmd *qc) { switch(qc->tf.command) @@ -466,7 +466,7 @@ static unsigned int it821x_smart_qc_issue_prot(struct ata_queued_cmd *qc) * perform out own device selection timing loads before the * usual happenings kick off */ - + static unsigned int it821x_passthru_qc_issue_prot(struct ata_queued_cmd *qc) { it821x_passthru_dev_select(qc->ap, qc->dev->devno); @@ -480,9 +480,9 @@ static unsigned int it821x_passthru_qc_issue_prot(struct ata_queued_cmd *qc) * Use a non standard set_mode function. We don't want to be tuned. * The BIOS configured everything. Our job is not to fiddle. We * read the dma enabled bits from the PCI configuration of the device - * and respect them. + * and respect them. */ - + static void it821x_smart_set_mode(struct ata_port *ap) { int dma_enabled = 0; @@ -492,14 +492,14 @@ static void it821x_smart_set_mode(struct ata_port *ap) /* It is possible that BMDMA isn't allocated */ if (ap->ioaddr.bmdma_addr) dma_enabled = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - + for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; if (ata_dev_enabled(dev)) { /* We don't really care */ dev->pio_mode = XFER_PIO_0; dev->dma_mode = XFER_MW_DMA_0; - /* We do need the right mode information for DMA or PIO + /* We do need the right mode information for DMA or PIO and this comes from the current configuration flags */ if (dma_enabled & (1 << (5 + i))) { dev->xfer_mode = XFER_MW_DMA_0; @@ -526,7 +526,7 @@ static void it821x_smart_set_mode(struct ata_port *ap) * FIXME: When FUA appears we need to block FUA too. And SMART and * basically we need to filter commands for this chip. */ - + static void it821x_dev_config(struct ata_port *ap, struct ata_device *adev) { unsigned char model_num[40]; @@ -535,7 +535,7 @@ static void it821x_dev_config(struct ata_port *ap, struct ata_device *adev) /* This block ought to be a library routine as it is in several drivers now */ - + ata_id_string(adev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num)); s = &model_num[0]; @@ -549,7 +549,7 @@ static void it821x_dev_config(struct ata_port *ap, struct ata_device *adev) if (adev->max_sectors > 255) adev->max_sectors = 255; - + if (strstr(model_num, "Integrated Technology Express")) { /* RAID mode */ printk(KERN_INFO "IT821x %sRAID%d volume", @@ -569,12 +569,12 @@ static void it821x_dev_config(struct ata_port *ap, struct ata_device *adev) * Decide if this ATAPI command can be issued by DMA on this * controller. Return 0 if it can be. */ - + static int it821x_check_atapi_dma(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct it821x_dev *itdev = ap->private_data; - + /* No ATAPI DMA in smart mode */ if (itdev->smart) return -EOPNOTSUPP; @@ -584,7 +584,7 @@ static int it821x_check_atapi_dma(struct ata_queued_cmd *qc) /* Cool */ return 0; } - + /** * it821x_port_start - port setup @@ -592,10 +592,10 @@ static int it821x_check_atapi_dma(struct ata_queued_cmd *qc) * * The it821x needs to maintain private data structures and also to * use the standard PCI interface which lacks support for this - * functionality. We instead set up the private data on the port + * functionality. We instead set up the private data on the port * start hook, and tear it down on port stop */ - + static int it821x_port_start(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); @@ -605,13 +605,13 @@ static int it821x_port_start(struct ata_port *ap) int ret = ata_port_start(ap); if (ret < 0) return ret; - + ap->private_data = kmalloc(sizeof(struct it821x_dev), GFP_KERNEL); if (ap->private_data == NULL) { ata_port_stop(ap); return -ENOMEM; } - + itdev = ap->private_data; memset(itdev, 0, sizeof(struct it821x_dev)); @@ -650,7 +650,7 @@ static int it821x_port_start(struct ata_port *ap) * * Release the private objects we added in it821x_port_start */ - + static void it821x_port_stop(struct ata_port *ap) { kfree(ap->private_data); ap->private_data = NULL; /* We want an OOPS if we reuse this @@ -684,7 +684,7 @@ static struct ata_port_operations it821x_smart_port_ops = { .tf_load = ata_tf_load, .tf_read = ata_tf_read, .mode_filter = ata_pci_default_filter, - + .check_status = ata_check_status, .check_atapi_dma= it821x_check_atapi_dma, .exec_command = ata_exec_command, @@ -712,14 +712,14 @@ static struct ata_port_operations it821x_smart_port_ops = { .port_start = it821x_port_start, .port_stop = it821x_port_stop, .host_stop = ata_host_stop -}; +}; static struct ata_port_operations it821x_passthru_port_ops = { .port_disable = ata_port_disable, .set_piomode = it821x_passthru_set_piomode, .set_dmamode = it821x_passthru_set_dmamode, .mode_filter = ata_pci_default_filter, - + .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -748,7 +748,7 @@ static struct ata_port_operations it821x_passthru_port_ops = { .port_start = it821x_port_start, .port_stop = it821x_port_stop, .host_stop = ata_host_stop -}; +}; static void __devinit it821x_disable_raid(struct pci_dev *pdev) { @@ -767,11 +767,11 @@ static void __devinit it821x_disable_raid(struct pci_dev *pdev) pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x20); } - + static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { u8 conf; - + static struct ata_port_info info_smart = { .sht = &it821x_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, @@ -788,7 +788,7 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &it821x_passthru_port_ops }; static struct ata_port_info *port_info[2]; - + static char *mode[2] = { "pass through", "smart" }; /* Force the card into bypass mode if so requested */ @@ -798,13 +798,13 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) } pci_read_config_byte(pdev, 0x50, &conf); conf &= 1; - + printk(KERN_INFO DRV_NAME ": controller in %s mode.\n", mode[conf]); if (conf == 0) port_info[0] = port_info[1] = &info_passthru; else port_info[0] = port_info[1] = &info_smart; - + return ata_pci_init_one(pdev, port_info, 2); } diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index eb510660b42..ad37c220bb2 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -211,11 +211,11 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) int pio = adev->pio_mode - XFER_PIO_0; u8 rt; unsigned long flags; - + /* Safe as UP only. Force I/Os to occur together */ - + local_irq_save(flags); - + /* Unlock the control interface */ do { @@ -230,7 +230,7 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) while((inb(0x1F2) & 0x80) && --tries); local_irq_restore(flags); - + outb(inb(0x1F4) & 0x07, 0x1F4); rt = inb(0x1F3); @@ -425,7 +425,7 @@ static struct ata_port_operations ht6560b_port_ops = { /* * Opti core chipset helpers */ - + /** * opti_syscfg - read OPTI chipset configuration * @reg: Configuration register to read @@ -437,7 +437,7 @@ static u8 opti_syscfg(u8 reg) { unsigned long flags; u8 r; - + /* Uniprocessor chipset and must force cycles adjancent */ local_irq_save(flags); outb(reg, 0x22); @@ -719,7 +719,7 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl } /* Probe for automatically detectable controllers */ - + if (io == 0x1F0 && ops == &legacy_port_ops) { unsigned long flags; @@ -868,7 +868,7 @@ static __init int legacy_init(void) last_port = 2; } - /* If an OPTI 82C46X is present find out where the channels are */ + /* If an OPTI 82C46X is present find out where the channels are */ if (opti82c46x) { static const char *optis[4] = { "3/463MV", "5MV", @@ -876,7 +876,7 @@ static __init int legacy_init(void) }; u8 chans = 1; u8 ctrl = (opti_syscfg(0x30) & 0xC0) >> 6; - + opti82c46x = 3; /* Assume master and slave first */ printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n", optis[ctrl]); if (ctrl == 3) diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c index e3a85778cd4..16cb254cb97 100644 --- a/drivers/ata/pata_netcell.c +++ b/drivers/ata/pata_netcell.c @@ -24,7 +24,7 @@ * * Cables are handled by the RAID controller. Report 80 pin. */ - + static int netcell_pre_reset(struct ata_port *ap) { ap->cbl = ATA_CBL_PATA80; @@ -137,7 +137,7 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e /* Any chip specific setup/optimisation/messages here */ ata_pci_clear_simplex(pdev); - + /* And let the library code do the work */ return ata_pci_init_one(pdev, port_info, 2); } diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c index 800aea7b944..177a455f425 100644 --- a/drivers/ata/pata_optidma.c +++ b/drivers/ata/pata_optidma.c @@ -51,11 +51,11 @@ static int pci_clock; /* 0 = 33 1 = 25 */ * * Set up cable type and use generic probe init */ - + static int optidma_pre_reset(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); - static const struct pci_bits optidma_enable_bits = { + static const struct pci_bits optidma_enable_bits = { 0x40, 1, 0x08, 0x00 }; @@ -90,11 +90,11 @@ static void optidma_error_handler(struct ata_port *ap) * Unlock the control register block for this adapter. Registers must not * be unlocked in a situation where libata might look at them. */ - + static void optidma_unlock(struct ata_port *ap) { unsigned long regio = ap->ioaddr.cmd_addr; - + /* These 3 unlock the control register access */ inw(regio + 1); inw(regio + 1); @@ -107,11 +107,11 @@ static void optidma_unlock(struct ata_port *ap) * * Re-lock the configuration register settings. */ - + static void optidma_lock(struct ata_port *ap) { unsigned long regio = ap->ioaddr.cmd_addr; - + /* Relock */ outb(0x83, regio + 2); } @@ -154,7 +154,7 @@ static void optidma_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mo /* Switch from IDE to control mode */ optidma_unlock(ap); - + /* * As with many controllers the address setup time is shared @@ -166,7 +166,7 @@ static void optidma_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mo addr = 0; else addr = addr_timing[pci_clock][pio]; - + if (pair) { u8 pair_addr; /* Hardware constraint */ @@ -177,7 +177,7 @@ static void optidma_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mo if (pair_addr > addr) addr = pair_addr; } - + /* Commence primary programming sequence */ /* First we load the device number into the timing select */ outb(adev->devno, regio + MISC_REG); @@ -194,10 +194,10 @@ static void optidma_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mo /* Programming sequence complete, timing 0 dev 0, timing 1 dev 1 */ outb(0x85, regio + CNTRL_REG); - + /* Switch back to IDE mode */ optidma_lock(ap); - + /* Note: at this point our programming is incomplete. We are not supposed to program PCI 0x43 "things we hacked onto the chip" until we've done both sets of PIO/DMA timings */ @@ -223,7 +223,7 @@ static void optiplus_set_mode(struct ata_port *ap, struct ata_device *adev, u8 m int dev2 = 2 * adev->devno; int unit = 2 * ap->port_no + adev->devno; int udma = mode - XFER_UDMA_0; - + pci_read_config_byte(pdev, 0x44, &udcfg); if (mode <= XFER_UDMA_0) { udcfg &= ~(1 << unit); @@ -252,7 +252,7 @@ static void optiplus_set_mode(struct ata_port *ap, struct ata_device *adev, u8 m * DMA programming. The architecture of the Firestar makes it easier * for us to have a common function so we provide wrappers */ - + static void optidma_set_pio_mode(struct ata_port *ap, struct ata_device *adev) { optidma_set_mode(ap, adev, adev->pio_mode); @@ -267,7 +267,7 @@ static void optidma_set_pio_mode(struct ata_port *ap, struct ata_device *adev) * DMA programming. The architecture of the Firestar makes it easier * for us to have a common function so we provide wrappers */ - + static void optidma_set_dma_mode(struct ata_port *ap, struct ata_device *adev) { optidma_set_mode(ap, adev, adev->dma_mode); @@ -282,7 +282,7 @@ static void optidma_set_dma_mode(struct ata_port *ap, struct ata_device *adev) * DMA programming. The architecture of the Firestar makes it easier * for us to have a common function so we provide wrappers */ - + static void optiplus_set_pio_mode(struct ata_port *ap, struct ata_device *adev) { optiplus_set_mode(ap, adev, adev->pio_mode); @@ -297,7 +297,7 @@ static void optiplus_set_pio_mode(struct ata_port *ap, struct ata_device *adev) * DMA programming. The architecture of the Firestar makes it easier * for us to have a common function so we provide wrappers */ - + static void optiplus_set_dma_mode(struct ata_port *ap, struct ata_device *adev) { optiplus_set_mode(ap, adev, adev->dma_mode); @@ -310,7 +310,7 @@ static void optiplus_set_dma_mode(struct ata_port *ap, struct ata_device *adev) * Turn the ATA device setup into PCI configuration bits * for register 0x43 and return the two bits needed. */ - + static u8 optidma_make_bits43(struct ata_device *adev) { static const u8 bits43[5] = { @@ -330,17 +330,17 @@ static u8 optidma_make_bits43(struct ata_device *adev) * Finalise the configuration by writing the nibble of extra bits * of data into the chip. */ - + static void optidma_post_set_mode(struct ata_port *ap) { u8 r; int nybble = 4 * ap->port_no; struct pci_dev *pdev = to_pci_dev(ap->host->dev); - + pci_read_config_byte(pdev, 0x43, &r); - + r &= (0x0F << nybble); - r |= (optidma_make_bits43(&ap->device[0]) + + r |= (optidma_make_bits43(&ap->device[0]) + (optidma_make_bits43(&ap->device[0]) << 2)) << nybble; pci_write_config_byte(pdev, 0x43, r); @@ -438,19 +438,19 @@ static struct ata_port_operations optiplus_port_ops = { * optiplus_with_udma - Look for UDMA capable setup * @pdev; ATA controller */ - + static int optiplus_with_udma(struct pci_dev *pdev) { u8 r; int ret = 0; int ioport = 0x22; struct pci_dev *dev1; - + /* Find function 1 */ dev1 = pci_get_device(0x1045, 0xC701, NULL); if(dev1 == NULL) return 0; - + /* Rev must be >= 0x10 */ pci_read_config_byte(dev1, 0x08, &r); if (r < 0x10) @@ -470,7 +470,7 @@ static int optiplus_with_udma(struct pci_dev *pdev) pci_read_config_byte(dev1, 0x52, &r); if (r & 0x80) /* IDEDIR disabled */ ret = 1; -done: +done: printk(KERN_WARNING "UDMA not supported in this configuration.\n"); done_nomsg: /* Wrong chip revision */ pci_dev_put(dev1); @@ -505,7 +505,7 @@ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id) inw(0x1F1); inw(0x1F1); pci_clock = inb(0x1F5) & 1; /* 0 = 33Mhz, 1 = 25Mhz */ - + if (optiplus_with_udma(dev)) info = &info_82c700_udma; diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 2abe0a3bbb9..62b25cda409 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -1,7 +1,7 @@ /* * pata_pcmcia.c - PCMCIA PATA controller driver. * Copyright 2005-2006 Red Hat Inc , all rights reserved. - * PCMCIA ident update Copyright 2006 Marcin Juszkiewicz + * PCMCIA ident update Copyright 2006 Marcin Juszkiewicz * * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index 6cb52b0e769..48f43432764 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -10,7 +10,7 @@ * TODO: * Channel interlock/reset on both required ? */ - + #include #include #include @@ -29,7 +29,7 @@ * * Set up cable type and use generic probe init */ - + static int pdc2024x_pre_reset(struct ata_port *ap) { ap->cbl = ATA_CBL_PATA40; @@ -47,7 +47,7 @@ static int pdc2026x_pre_reset(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); u16 cis; - + pci_read_config_word(pdev, 0x50, &cis); if (cis & (1 << (10 + ap->port_no))) ap->cbl = ATA_CBL_PATA80; @@ -72,7 +72,7 @@ static void pdc2026x_error_handler(struct ata_port *ap) * so a configure_dmamode call will undo any work we do here and vice * versa */ - + static void pdc_configure_piomode(struct ata_port *ap, struct ata_device *adev, int pio) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); @@ -88,7 +88,7 @@ static void pdc_configure_piomode(struct ata_port *ap, struct ata_device *adev, r_bp &= ~0x07; r_ap |= (pio_timing[pio] >> 8); r_bp |= (pio_timing[pio] & 0xFF); - + if (ata_pio_need_iordy(adev)) r_ap |= 0x20; /* IORDY enable */ if (adev->class == ATA_DEV_ATA) @@ -105,7 +105,7 @@ static void pdc_configure_piomode(struct ata_port *ap, struct ata_device *adev, * Called to do the PIO mode setup. Our timing registers are shared * but we want to set the PIO timing by default. */ - + static void pdc_set_piomode(struct ata_port *ap, struct ata_device *adev) { pdc_configure_piomode(ap, adev, adev->pio_mode - XFER_PIO_0); @@ -119,7 +119,7 @@ static void pdc_set_piomode(struct ata_port *ap, struct ata_device *adev) * Load DMA cycle times into the chip ready for a DMA transfer * to occur. */ - + static void pdc_set_dmamode(struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); @@ -130,21 +130,21 @@ static void pdc_set_dmamode(struct ata_port *ap, struct ata_device *adev) { 0x20, 0x01 }, { 0x40, 0x02 }, /* 66 Mhz Clock */ { 0x20, 0x01 }, - { 0x20, 0x01 } + { 0x20, 0x01 } }; u8 r_bp, r_cp; - + pci_read_config_byte(pdev, port + 1, &r_bp); pci_read_config_byte(pdev, port + 2, &r_cp); - + r_bp &= ~0xF0; r_cp &= ~0x0F; - + if (adev->dma_mode >= XFER_UDMA_0) { int speed = adev->dma_mode - XFER_UDMA_0; r_bp |= udma_timing[speed][0]; r_cp |= udma_timing[speed][1]; - + } else { int speed = adev->dma_mode - XFER_MW_DMA_0; r_bp |= 0x60; @@ -152,7 +152,7 @@ static void pdc_set_dmamode(struct ata_port *ap, struct ata_device *adev) } pci_write_config_byte(pdev, port + 1, r_bp); pci_write_config_byte(pdev, port + 2, r_cp); - + } /** @@ -162,7 +162,7 @@ static void pdc_set_dmamode(struct ata_port *ap, struct ata_device *adev) * In UDMA3 or higher we have to clock switch for the duration of the * DMA transfer sequence. */ - + static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; @@ -173,16 +173,16 @@ static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc) unsigned long master = ap->host->ports[0]->ioaddr.bmdma_addr; unsigned long clock = master + 0x11; unsigned long atapi_reg = master + 0x20 + (4 * ap->port_no); - + u32 len; - + /* Check we keep host level locking here */ if (adev->dma_mode >= XFER_UDMA_2) outb(inb(clock) | sel66, clock); else outb(inb(clock) & ~sel66, clock); - /* The DMA clocks may have been trashed by a reset. FIXME: make conditional + /* The DMA clocks may have been trashed by a reset. FIXME: make conditional and move to qc_issue ? */ pdc_set_dmamode(ap, qc->dev); @@ -193,16 +193,16 @@ static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc) len = qc->nsect * 512; else len = qc->nbytes; - + if (tf->flags & ATA_TFLAG_WRITE) len |= 0x06000000; else len |= 0x05000000; - + outl(len, atapi_reg); } - - /* Activate DMA */ + + /* Activate DMA */ ata_bmdma_start(qc); } @@ -213,19 +213,19 @@ static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc) * After a DMA completes we need to put the clock back to 33MHz for * PIO timings. */ - + static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct ata_device *adev = qc->dev; struct ata_taskfile *tf = &qc->tf; - + int sel66 = ap->port_no ? 0x08: 0x02; /* The clock bits are in the same register for both channels */ unsigned long master = ap->host->ports[0]->ioaddr.bmdma_addr; unsigned long clock = master + 0x11; unsigned long atapi_reg = master + 0x20 + (4 * ap->port_no); - + /* Cases the state machine will not complete correctly */ if (tf->protocol == ATA_PROT_ATAPI_DMA || ( tf->flags & ATA_TFLAG_LBA48)) { outl(0, atapi_reg); @@ -248,7 +248,7 @@ static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc) * sizes to 8bit to avoid making the state engine on the 2026x cards * barf. */ - + static void pdc2026x_dev_config(struct ata_port *ap, struct ata_device *adev) { adev->max_sectors = 256; @@ -299,11 +299,11 @@ static struct ata_port_operations pdc2024x_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, - + .port_start = ata_port_start, .port_stop = ata_port_stop, .host_stop = ata_host_stop -}; +}; static struct ata_port_operations pdc2026x_port_ops = { .port_disable = ata_port_disable, @@ -333,11 +333,11 @@ static struct ata_port_operations pdc2026x_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, - + .port_start = ata_port_start, .port_stop = ata_port_stop, .host_stop = ata_host_stop -}; +}; static int pdc_init_one(struct pci_dev *dev, const struct pci_device_id *id) { @@ -349,7 +349,7 @@ static int pdc_init_one(struct pci_dev *dev, const struct pci_device_id *id) .mwdma_mask = 0x07, .udma_mask = ATA_UDMA2, .port_ops = &pdc2024x_port_ops - }, + }, { .sht = &pdc_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, @@ -366,12 +366,12 @@ static int pdc_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = ATA_UDMA5, .port_ops = &pdc2026x_port_ops } - + }; static struct ata_port_info *port_info[2]; port_info[0] = port_info[1] = &info[id->driver_data]; - + if (dev->device == PCI_DEVICE_ID_PROMISE_20265) { struct pci_dev *bridge = dev->bus->self; /* Don't grab anything behind a Promise I2O RAID */ diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c index ededb40e084..35cfdf0ac3f 100644 --- a/drivers/ata/pata_qdi.c +++ b/drivers/ata/pata_qdi.c @@ -36,7 +36,7 @@ struct qdi_data { u8 last; int fast; struct platform_device *platform_dev; - + }; static struct ata_host *qdi_host[NR_HOST]; @@ -58,7 +58,7 @@ static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev) /* Get the timing data in cycles */ ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); - + if (qdi->fast) { active = 8 - FIT(t.active, 1, 8); recovery = 18 - FIT(t.recover, 3, 18); @@ -67,10 +67,10 @@ static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev) recovery = 15 - FIT(t.recover, 0, 15); } timing = (recovery << 4) | active | 0x08; - + qdi->clock[adev->devno] = timing; - outb(timing, qdi->timing); + outb(timing, qdi->timing); } static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev) @@ -82,7 +82,7 @@ static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev) /* Get the timing data in cycles */ ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); - + if (qdi->fast) { active = 8 - FIT(t.active, 1, 8); recovery = 18 - FIT(t.recover, 3, 18); @@ -91,11 +91,11 @@ static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev) recovery = 15 - FIT(t.recover, 0, 15); } timing = (recovery << 4) | active | 0x08; - + qdi->clock[adev->devno] = timing; outb(timing, qdi->timing); - + /* Clear the FIFO */ if (adev->class != ATA_DEV_ATA) outb(0x5F, (qdi->timing & 0xFFF0) + 3); @@ -128,13 +128,13 @@ static void qdi_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned { struct ata_port *ap = adev->ap; int slop = buflen & 3; - + if (ata_id_has_dword_io(adev->id)) { if (write_data) outsl(ap->ioaddr.data_addr, buf, buflen >> 2); else insl(ap->ioaddr.data_addr, buf, buflen >> 2); - + if (unlikely(slop)) { u32 pad; if (write_data) { @@ -181,7 +181,7 @@ static struct ata_port_operations qdi6500_port_ops = { .thaw = ata_bmdma_thaw, .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, - + .qc_prep = ata_qc_prep, .qc_issue = qdi_qc_issue_prot, .eng_timeout = ata_eng_timeout, @@ -189,11 +189,11 @@ static struct ata_port_operations qdi6500_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, - + .port_start = ata_port_start, .port_stop = ata_port_stop, .host_stop = ata_host_stop -}; +}; static struct ata_port_operations qdi6580_port_ops = { .port_disable = ata_port_disable, @@ -209,7 +209,7 @@ static struct ata_port_operations qdi6580_port_ops = { .thaw = ata_bmdma_thaw, .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, - + .qc_prep = ata_qc_prep, .qc_issue = qdi_qc_issue_prot, .eng_timeout = ata_eng_timeout, @@ -217,11 +217,11 @@ static struct ata_port_operations qdi6580_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, - + .port_start = ata_port_start, .port_stop = ata_port_stop, .host_stop = ata_host_stop -}; +}; /** * qdi_init_one - attach a qdi interface @@ -233,7 +233,7 @@ static struct ata_port_operations qdi6580_port_ops = { * Register an ISA bus IDE interface. Such interfaces are PIO and we * assume do not support IRQ sharing. */ - + static __init int qdi_init_one(unsigned long port, int type, unsigned long io, int irq, int fast) { struct ata_probe_ent ae; @@ -249,11 +249,11 @@ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, i pdev = platform_device_register_simple(DRV_NAME, nr_qdi_host, NULL, 0); if (pdev == NULL) return -ENOMEM; - + memset(&ae, 0, sizeof(struct ata_probe_ent)); INIT_LIST_HEAD(&ae.node); ae.dev = &pdev->dev; - + if (type == 6580) { ae.port_ops = &qdi6580_port_ops; ae.pio_mask = 0x1F; @@ -261,7 +261,7 @@ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, i ae.port_ops = &qdi6500_port_ops; ae.pio_mask = 0x07; /* Actually PIO3 !IORDY is possible */ } - + ae.sht = &qdi_sht; ae.n_ports = 1; ae.irq = irq; @@ -287,9 +287,9 @@ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, i platform_device_unregister(pdev); return -ENODEV; } - + qdi_host[nr_qdi_host++] = dev_get_drvdata(&pdev->dev); - return 0; + return 0; } /** @@ -297,29 +297,29 @@ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, i * * Attach qdi IDE interfaces by scanning the ports it may occupy. */ - + static __init int qdi_init(void) { unsigned long flags; static const unsigned long qd_port[2] = { 0x30, 0xB0 }; static const unsigned long ide_port[2] = { 0x170, 0x1F0 }; static const int ide_irq[2] = { 14, 15 }; - + int ct = 0; int i; - + if (probe_qdi == 0) return -ENODEV; - + /* * Check each possible QD65xx base address */ - + for (i = 0; i < 2; i++) { unsigned long port = qd_port[i]; u8 r, res; - - + + if (request_region(port, 2, "pata_qdi")) { /* Check for a card */ local_irq_save(flags); @@ -328,14 +328,14 @@ static __init int qdi_init(void) res = inb_p(port); outb_p(r, port); local_irq_restore(flags); - + /* Fail */ if (res == 0x19) { release_region(port, 2); continue; } - + /* Passes the presence test */ r = inb_p(port + 1); /* Check port agrees with port set */ if ((r & 2) >> 1 != i) { @@ -343,7 +343,7 @@ static __init int qdi_init(void) continue; } - /* Check card type */ + /* Check card type */ if ((r & 0xF0) == 0xC0) { /* QD6500: single channel */ if (r & 8) { @@ -388,7 +388,7 @@ static __exit void qdi_exit(void) */ release_region(qdi_data[i].timing, 2); platform_device_unregister(qdi_data[i].platform_dev); - } + } } MODULE_AUTHOR("Alan Cox"); diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c index 6f7d0527265..277f8411b52 100644 --- a/drivers/ata/pata_radisys.c +++ b/drivers/ata/pata_radisys.c @@ -32,7 +32,7 @@ * * Set up cable type and use generic probe init */ - + static int radisys_pre_reset(struct ata_port *ap) { ap->cbl = ATA_CBL_PATA80; @@ -122,7 +122,7 @@ static void radisys_set_dmamode (struct ata_port *ap, struct ata_device *adev) struct pci_dev *dev = to_pci_dev(ap->host->dev); u16 idetm_data; u8 udma_enable; - + static const /* ISP RTC */ u8 timings[][2] = { { 0, 0 }, { 0, 0 }, @@ -154,7 +154,7 @@ static void radisys_set_dmamode (struct ata_port *ap, struct ata_device *adev) /* Mask out the relevant control and timing bits we will load. Also clear the other drive TIME register as a precaution */ - + idetm_data &= 0xCCCC; idetm_data |= control << (4 * adev->devno); idetm_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8); @@ -162,18 +162,18 @@ static void radisys_set_dmamode (struct ata_port *ap, struct ata_device *adev) udma_enable &= ~(1 << adev->devno); } else { u8 udma_mode; - + /* UDMA66 on: UDMA 33 and 66 are switchable via register 0x4A */ - + pci_read_config_byte(dev, 0x4A, &udma_mode); - + if (adev->xfer_mode == XFER_UDMA_2) udma_mode &= ~ (1 << adev->devno); else /* UDMA 4 */ udma_mode |= (1 << adev->devno); - + pci_write_config_byte(dev, 0x4A, udma_mode); - + udma_enable |= (1 << adev->devno); } pci_write_config_word(dev, 0x40, idetm_data); diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c index 9b42b9a5242..4166c1a8a9e 100644 --- a/drivers/ata/pata_sc1200.c +++ b/drivers/ata/pata_sc1200.c @@ -27,7 +27,7 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * + * */ #include @@ -54,14 +54,14 @@ * Return the PCI bus clocking for the SC1200 chipset configuration * in use. We return 0 for 33MHz 1 for 48MHz and 2 for 66Mhz */ - + static int sc1200_clock(void) { /* Magic registers that give us the chipset data */ u8 chip_id = inb(0x903C); u8 silicon_rev = inb(0x903D); u16 pci_clock; - + if (chip_id == 0x04 && silicon_rev < SC1200_REV_B1) return 0; /* 33 MHz mode */ @@ -83,7 +83,7 @@ static int sc1200_clock(void) * * Set our PIO requirements. This is fairly simple on the SC1200 */ - + static void sc1200_set_piomode(struct ata_port *ap, struct ata_device *adev) { static const u32 pio_timings[4][5] = { @@ -97,11 +97,11 @@ static void sc1200_set_piomode(struct ata_port *ap, struct ata_device *adev) u32 format; unsigned int reg = 0x40 + 0x10 * ap->port_no; int mode = adev->pio_mode - XFER_PIO_0; - + pci_read_config_dword(pdev, reg + 4, &format); format >>= 31; format += sc1200_clock(); - pci_write_config_dword(pdev, reg + 8 * adev->devno, + pci_write_config_dword(pdev, reg + 8 * adev->devno, pio_timings[format][mode]); } @@ -113,7 +113,7 @@ static void sc1200_set_piomode(struct ata_port *ap, struct ata_device *adev) * We cannot mix MWDMA and UDMA without reloading timings each switch * master to slave. */ - + static void sc1200_set_dmamode(struct ata_port *ap, struct ata_device *adev) { static const u32 udma_timing[3][3] = { @@ -121,13 +121,13 @@ static void sc1200_set_dmamode(struct ata_port *ap, struct ata_device *adev) { 0x00932470, 0x00922260, 0x00922140 }, { 0x009436A1, 0x00933481, 0x00923261 } }; - + static const u32 mwdma_timing[3][3] = { { 0x00077771, 0x00012121, 0x00002020 }, { 0x000BBBB2, 0x00024241, 0x00013131 }, { 0x000FFFF3, 0x00035352, 0x00015151 } }; - + int clock = sc1200_clock(); struct pci_dev *pdev = to_pci_dev(ap->host->dev); unsigned int reg = 0x40 + 0x10 * ap->port_no; @@ -138,10 +138,10 @@ static void sc1200_set_dmamode(struct ata_port *ap, struct ata_device *adev) format = udma_timing[clock][mode - XFER_UDMA_0]; else format = mwdma_timing[clock][mode - XFER_MW_DMA_0]; - + if (adev->devno == 0) { u32 timings; - + pci_read_config_dword(pdev, reg + 4, &timings); timings &= 0x80000000UL; timings |= format; @@ -201,7 +201,7 @@ static struct ata_port_operations sc1200_port_ops = { .set_piomode = sc1200_set_piomode, .set_dmamode = sc1200_set_dmamode, .mode_filter = ata_pci_default_filter, - + .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -226,7 +226,7 @@ static struct ata_port_operations sc1200_port_ops = { .port_start = ata_port_start, .port_stop = ata_port_stop, .host_stop = ata_host_stop -}; +}; /** * sc1200_init_one - Initialise an SC1200 @@ -236,7 +236,7 @@ static struct ata_port_operations sc1200_port_ops = { * Just throw the needed data at the libata helper and it does all * our work. */ - + static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static struct ata_port_info info = { @@ -248,7 +248,7 @@ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) .port_ops = &sc1200_port_ops }; static struct ata_port_info *port_info[2] = { &info, &info }; - + /* Can't enable port 2 yet, see top comments */ return ata_pci_init_one(dev, port_info, 1); } diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index 3ec30036c97..af456113c55 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -6,7 +6,7 @@ * based upon * * serverworks.c - * + * * Copyright (C) 1998-2000 Michel Aubry * Copyright (C) 1998-2000 Andrzej Krzysztofowicz * Copyright (C) 1998-2000 Andre Hedrick @@ -62,12 +62,12 @@ static const char *csb_bad_ata100[] = { * @ap: ATA port to do cable detect * * Dell hide the 40/80 pin select for their interfaces in the top two - * bits of the subsystem ID. + * bits of the subsystem ID. */ - + static int dell_cable(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); - + if (pdev->subsystem_device & (1 << (ap->port_no + 14))) return ATA_CBL_PATA80; return ATA_CBL_PATA40; @@ -81,10 +81,10 @@ static int dell_cable(struct ata_port *ap) { * subsystem ID the same as dell. We could use one function but we may * need to extend the Dell one in future */ - + static int sun_cable(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); - + if (pdev->subsystem_device & (1 << (ap->port_no + 14))) return ATA_CBL_PATA80; return ATA_CBL_PATA40; @@ -123,7 +123,7 @@ struct sv_cable_table { * Note that we don't copy the old serverworks code because the old * code contains obvious mistakes */ - + static struct sv_cable_table cable_detect[] = { { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_DELL, dell_cable }, { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_VENDOR_ID_DELL, dell_cable }, @@ -140,16 +140,16 @@ static struct sv_cable_table cable_detect[] = { * serverworks_pre_reset - cable detection * @ap: ATA port * - * Perform cable detection according to the device and subvendor + * Perform cable detection according to the device and subvendor * identifications */ - + static int serverworks_pre_reset(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); struct sv_cable_table *cb = cable_detect; while(cb->device) { - if (cb->device == pdev->device && + if (cb->device == pdev->device && (cb->subvendor == pdev->subsystem_vendor || cb->subvendor == PCI_ANY_ID)) { ap->cbl = cb->cable_detect(ap); @@ -174,7 +174,7 @@ static void serverworks_error_handler(struct ata_port *ap) * Returns true if the device being checked is known to be a CSB * series device. */ - + static u8 serverworks_is_csb(struct pci_dev *pdev) { switch (pdev->device) { @@ -198,7 +198,7 @@ static u8 serverworks_is_csb(struct pci_dev *pdev) * specific rules. OSB4 requires no UDMA for disks due to a FIFO * bug we hit. */ - + static unsigned long serverworks_osb4_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask) { if (adev->class == ATA_DEV_ATA) @@ -221,14 +221,14 @@ static unsigned long serverworks_csb_filter(const struct ata_port *ap, struct at char model_num[40]; int len, i; - /* Disk, UDMA */ + /* Disk, UDMA */ if (adev->class != ATA_DEV_ATA) return ata_pci_default_filter(ap, adev, mask); /* Actually do need to check */ ata_id_string(adev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num)); /* Precuationary - why not do this in the libata core ?? */ - + len = strlen(model_num); while ((len > 0) && (model_num[len - 1] == ' ')) { len--; @@ -261,7 +261,7 @@ static void serverworks_set_piomode(struct ata_port *ap, struct ata_device *adev int pio = adev->pio_mode - XFER_PIO_0; pci_write_config_byte(pdev, 0x40 + offset, pio_mode[pio]); - + /* The OSB4 just requires the timing but the CSB series want the mode number as well */ if (serverworks_is_csb(pdev)) { @@ -303,7 +303,7 @@ static void serverworks_set_dmamode(struct ata_port *ap, struct ata_device *adev ultra_cfg |= (1 << devbits); } else { - pci_write_config_byte(pdev, 0x44 + offset, + pci_write_config_byte(pdev, 0x44 + offset, dma_mode[adev->dma_mode - XFER_MW_DMA_0]); ultra_cfg &= ~(1 << devbits); } @@ -333,7 +333,7 @@ static struct ata_port_operations serverworks_osb4_port_ops = { .set_piomode = serverworks_set_piomode, .set_dmamode = serverworks_set_dmamode, .mode_filter = serverworks_osb4_filter, - + .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -354,19 +354,19 @@ static struct ata_port_operations serverworks_osb4_port_ops = { .qc_issue = ata_qc_issue_prot, .eng_timeout = ata_eng_timeout, .data_xfer = ata_pio_data_xfer, - + .irq_handler = ata_interrupt, .port_start = ata_port_start, .port_stop = ata_port_stop, .host_stop = ata_host_stop -}; +}; static struct ata_port_operations serverworks_csb_port_ops = { .port_disable = ata_port_disable, .set_piomode = serverworks_set_piomode, .set_dmamode = serverworks_set_dmamode, .mode_filter = serverworks_csb_filter, - + .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -387,12 +387,12 @@ static struct ata_port_operations serverworks_csb_port_ops = { .qc_issue = ata_qc_issue_prot, .eng_timeout = ata_eng_timeout, .data_xfer = ata_pio_data_xfer, - + .irq_handler = ata_interrupt, .port_start = ata_port_start, .port_stop = ata_port_stop, .host_stop = ata_host_stop -}; +}; static int serverworks_fixup_osb4(struct pci_dev *pdev) { @@ -417,7 +417,7 @@ static int serverworks_fixup_csb(struct pci_dev *pdev) { u8 rev; u8 btr; - + pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); /* Third Channel Test */ @@ -463,7 +463,7 @@ static int serverworks_fixup_csb(struct pci_dev *pdev) else btr |= (rev >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2; pci_write_config_byte(pdev, 0x5A, btr); - + return btr; } @@ -514,7 +514,7 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id }; static struct ata_port_info *port_info[2]; struct ata_port_info *devinfo = &info[id->driver_data]; - + /* Force master latency timer to 64 PCI clocks */ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40); @@ -528,12 +528,12 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id else if ((pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) || (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) || (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) { - + /* If the returned btr is the newer revision then select the right info block */ if (serverworks_fixup_csb(pdev) == 3) devinfo = &info[3]; - + /* Is this the 3rd channel CSB6 IDE ? */ if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2) ports = 1; @@ -541,10 +541,10 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id /* setup HT1000E */ else if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) serverworks_fixup_ht1000(pdev); - + if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) ata_pci_clear_simplex(pdev); - + port_info[0] = port_info[1] = devinfo; return ata_pci_init_one(pdev, port_info, ports); } diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 4ad7fb44bfa..1cf5cf0a536 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -70,7 +70,7 @@ static int sis_133_pre_reset(struct ata_port *ap) { 0x4aU, 1U, 0x02UL, 0x02UL }, /* port 0 */ { 0x4aU, 1U, 0x04UL, 0x04UL }, /* port 1 */ }; - + struct pci_dev *pdev = to_pci_dev(ap->host->dev); u16 tmp; @@ -164,7 +164,7 @@ static int sis_old_pre_reset(struct ata_port *ap) { 0x4aU, 1U, 0x02UL, 0x02UL }, /* port 0 */ { 0x4aU, 1U, 0x04UL, 0x04UL }, /* port 1 */ }; - + struct pci_dev *pdev = to_pci_dev(ap->host->dev); if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) { @@ -601,7 +601,7 @@ static const struct ata_port_operations sis_133_early_ops = { .thaw = ata_bmdma_thaw, .error_handler = sis_66_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, - + .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, @@ -636,7 +636,7 @@ static const struct ata_port_operations sis_100_ops = { .thaw = ata_bmdma_thaw, .error_handler = sis_66_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, - + .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c index 47b290b5604..f8499786917 100644 --- a/drivers/ata/pata_sl82c105.c +++ b/drivers/ata/pata_sl82c105.c @@ -8,7 +8,7 @@ * * and in part on the documentation and errata sheet */ - + #include #include #include @@ -40,7 +40,7 @@ enum { * * Set up cable type and use generic probe init */ - + static int sl82c105_pre_reset(struct ata_port *ap) { static const struct pci_bits sl82c105_enable_bits[] = { @@ -75,7 +75,7 @@ static void sl82c105_error_handler(struct ata_port *ap) * so a configure_dmamode call will undo any work we do here and vice * versa */ - + static void sl82c105_configure_piomode(struct ata_port *ap, struct ata_device *adev, int pio) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); @@ -84,7 +84,7 @@ static void sl82c105_configure_piomode(struct ata_port *ap, struct ata_device *a }; u16 dummy; int timing = 0x44 + (8 * ap->port_no) + (4 * adev->devno); - + pci_write_config_word(pdev, timing, pio_timing[pio]); /* Can we lose this oddity of the old driver */ pci_read_config_word(pdev, timing, &dummy); @@ -98,7 +98,7 @@ static void sl82c105_configure_piomode(struct ata_port *ap, struct ata_device *a * Called to do the PIO mode setup. Our timing registers are shared * but we want to set the PIO timing by default. */ - + static void sl82c105_set_piomode(struct ata_port *ap, struct ata_device *adev) { sl82c105_configure_piomode(ap, adev, adev->pio_mode - XFER_PIO_0); @@ -112,7 +112,7 @@ static void sl82c105_set_piomode(struct ata_port *ap, struct ata_device *adev) * Load DMA cycle times into the chip ready for a DMA transfer * to occur. */ - + static void sl82c105_configure_dmamode(struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); @@ -122,7 +122,7 @@ static void sl82c105_configure_dmamode(struct ata_port *ap, struct ata_device *a u16 dummy; int timing = 0x44 + (8 * ap->port_no) + (4 * adev->devno); int dma = adev->dma_mode - XFER_MW_DMA_0; - + pci_write_config_word(pdev, timing, dma_timing[dma]); /* Can we lose this oddity of the old driver */ pci_read_config_word(pdev, timing, &dummy); @@ -137,7 +137,7 @@ static void sl82c105_configure_dmamode(struct ata_port *ap, struct ata_device *a * for the device in question. Set appropriate PIO timings not DMA * timings at this point. */ - + static void sl82c105_set_dmamode(struct ata_port *ap, struct ata_device *adev) { switch(adev->dma_mode) { @@ -152,7 +152,7 @@ static void sl82c105_set_dmamode(struct ata_port *ap, struct ata_device *adev) break; default: BUG(); - } + } } /** @@ -160,16 +160,16 @@ static void sl82c105_set_dmamode(struct ata_port *ap, struct ata_device *adev) * @ap: ATA interface * * The sl82c105 has some serious problems with the DMA engine - * when transfers don't run as expected or ATAPI is used. The + * when transfers don't run as expected or ATAPI is used. The * recommended fix is to reset the engine each use using a chip * test register. */ - + static void sl82c105_reset_engine(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); u16 val; - + pci_read_config_word(pdev, 0x7E, &val); pci_write_config_word(pdev, 0x7E, val | 4); pci_write_config_word(pdev, 0x7E, val & ~4); @@ -180,21 +180,21 @@ static void sl82c105_reset_engine(struct ata_port *ap) * @qc: ATA command * * Reset the DMA engine each use as recommended by the errata - * document. + * document. * * FIXME: if we switch clock at BMDMA start/end we might get better * PIO performance on DMA capable devices. */ - + static void sl82c105_bmdma_start(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; sl82c105_reset_engine(ap); - + /* Set the clocks for DMA */ sl82c105_configure_dmamode(ap, qc->dev); - /* Activate DMA */ + /* Activate DMA */ ata_bmdma_start(qc); } @@ -212,14 +212,14 @@ static void sl82c105_bmdma_start(struct ata_queued_cmd *qc) * We assume bmdma_stop is always called if bmdma_start as called. If * not then we may need to wrap qc_issue. */ - + static void sl82c105_bmdma_stop(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; ata_bmdma_stop(qc); sl82c105_reset_engine(ap); - + /* This will redo the initial setup of the DMA device to matching PIO timings */ sl82c105_set_dmamode(ap, qc->dev); @@ -269,11 +269,11 @@ static struct ata_port_operations sl82c105_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, - + .port_start = ata_port_start, .port_stop = ata_port_stop, .host_stop = ata_host_stop -}; +}; /** * sl82c105_bridge_revision - find bridge version @@ -283,7 +283,7 @@ static struct ata_port_operations sl82c105_port_ops = { * providing it is a Winbond 553 reports the revision. If it cannot * find a revision or the right device it returns -1 */ - + static int sl82c105_bridge_revision(struct pci_dev *pdev) { struct pci_dev *bridge; @@ -315,7 +315,7 @@ static int sl82c105_bridge_revision(struct pci_dev *pdev) return rev; } - + static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static struct ata_port_info info_dma = { @@ -336,7 +336,7 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id int rev; rev = sl82c105_bridge_revision(dev); - + if (rev == -1) dev_printk(KERN_WARNING, &dev->dev, "pata_sl82c105: Unable to find bridge, disabling DMA.\n"); else if (rev <= 5) @@ -345,7 +345,7 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id port_info[0] = &info_dma; port_info[1] = &info_dma; } - + pci_read_config_dword(dev, 0x40, &val); val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16; pci_write_config_dword(dev, 0x40, val); diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c index 7dd6ea3a21e..36f788728f3 100644 --- a/drivers/ata/pata_triflex.c +++ b/drivers/ata/pata_triflex.c @@ -60,7 +60,7 @@ static int triflex_probe_init(struct ata_port *ap) }; struct pci_dev *pdev = to_pci_dev(ap->host->dev); - + if (!pci_test_config_bits(pdev, &triflex_enable_bits[ap->port_no])) { ata_port_disable(ap); printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 2580e1606d9..1b2ff133b16 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -154,7 +154,7 @@ static int via_pre_reset(struct ata_port *ap) }; struct pci_dev *pdev = to_pci_dev(ap->host->dev); - + if (!pci_test_config_bits(pdev, &via_enable_bits[ap->port_no])) { ata_port_disable(ap); printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); -- cgit v1.2.3 From 406176ee7ef81cec3f346ecd41286a67148e3b0c Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 6 Sep 2006 10:48:19 -0400 Subject: [libata] Add pata_jmicron driver to Kconfig, Makefile Someone on LKML noticed it was missing (sorry, missed the name). Signed-off-by: Jeff Garzik --- drivers/ata/Kconfig | 9 +++++++++ drivers/ata/Makefile | 1 + 2 files changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index cbda988692e..cbf0deb2503 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -307,6 +307,15 @@ config PATA_IT821X If unsure, say N. +config PATA_JMICRON + tristate "JMicron PATA support" + depends on PCI + help + Enable support for the JMicron IDE controller, via the new + ATA layer. + + If unsure, say N. + config PATA_LEGACY tristate "Legacy ISA PATA support (Experimental)" depends on PCI && EXPERIMENTAL diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index b183a04aeaf..e42d14dbf03 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_PATA_HPT3X3) += pata_hpt3x3.o obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o obj-$(CONFIG_PATA_IT8172) += pata_it8172.o obj-$(CONFIG_PATA_IT821X) += pata_it821x.o +obj-$(CONFIG_PATA_JMICRON) += pata_jmicron.o obj-$(CONFIG_PATA_NETCELL) += pata_netcell.o obj-$(CONFIG_PATA_NS87410) += pata_ns87410.o obj-$(CONFIG_PATA_OPTI) += pata_opti.o -- cgit v1.2.3 From af323a2fb508b0fa1c1fa91cbc6ec86fb0879c07 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 12 Sep 2006 17:15:12 +0100 Subject: [PATCH] Update SiS PATA New chipset identifiers Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_sis.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 1cf5cf0a536..2e555168b43 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -34,7 +34,7 @@ #include #define DRV_NAME "pata_sis" -#define DRV_VERSION "0.4.2" +#define DRV_VERSION "0.4.3" struct sis_chipset { u16 device; /* PCI host ID */ @@ -857,6 +857,10 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) struct sis_chipset *chipset = NULL; static struct sis_chipset sis_chipsets[] = { + + { 0x0968, &sis_info133 }, + { 0x0966, &sis_info133 }, + { 0x0965, &sis_info133 }, { 0x0745, &sis_info100 }, { 0x0735, &sis_info100 }, { 0x0733, &sis_info100 }, -- cgit v1.2.3 From 76ff3c6e3b389a5a7692811dd456e0ff58340cac Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 12 Sep 2006 17:14:03 +0100 Subject: [PATCH] pata_amd: Check enable bits on Nvidia A couple of people reported long delays on probe with the newer kernels and Nvidia PATA. This turned out to be because the Nvidia path forgot to check the enable bits so probed empty ports. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_amd.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index b3f60fdb02d..3293cf9a7eb 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -25,7 +25,7 @@ #include #define DRV_NAME "pata_amd" -#define DRV_VERSION "0.2.2" +#define DRV_VERSION "0.2.3" /** * timing_setup - shared timing computation and load @@ -253,11 +253,22 @@ static void amd133_set_dmamode(struct ata_port *ap, struct ata_device *adev) static int nv_pre_reset(struct ata_port *ap) { static const u8 bitmask[2] = {0x03, 0xC0}; + static const struct pci_bits nv_enable_bits[] = { + { 0x50, 1, 0x02, 0x02 }, + { 0x50, 1, 0x01, 0x01 } + }; struct pci_dev *pdev = to_pci_dev(ap->host->dev); u8 ata66; u16 udma; + if (!pci_test_config_bits(pdev, &nv_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + + pci_read_config_byte(pdev, 0x52, &ata66); if (ata66 & bitmask[ap->port_no]) ap->cbl = ATA_CBL_PATA80; -- cgit v1.2.3 From b0fea350ce515c6ae01e0f259d9b1ffdec824e22 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 13 Sep 2006 00:25:23 -0400 Subject: [libata] ata_piix: build fix Spotted by Andrew Morton. Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 965b4f0ba71..ab2ecccf779 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -559,7 +559,7 @@ static struct ata_port_info piix_port_info[] = { /* ich7m_sata_ahci: 10 */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | + .flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ -- cgit v1.2.3 From cb60736b32a84cbc9525b0bb4df26b04cbfbc8e8 Mon Sep 17 00:00:00 2001 From: Arnaud Patard Date: Tue, 19 Sep 2006 00:23:52 -0400 Subject: Fix libata resource conflict for legacy mode When the libata is trying to handle legacy ide ports (0x1f0 for instance), it doesn't take care if the resource has childs or not. The result is that this situation : 0100-01fe : pnp 00:09 0170-0177 : libata 01f0-01f7 : libata is seen as conflict, which is wrong. The proposed fix is to detect childs and in this case, look at which child is conflicting. Signed-off-by: Arnaud Patard Signed-off-by: Jeff Garzik --- drivers/scsi/libata-bmdma.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-bmdma.c b/drivers/scsi/libata-bmdma.c index 9ce221f2595..3482abbc6e0 100644 --- a/drivers/scsi/libata-bmdma.c +++ b/drivers/scsi/libata-bmdma.c @@ -1016,11 +1016,14 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, res.start = 0x1f0; res.end = 0x1f0 + 8 - 1; conflict = ____request_resource(&ioport_resource, &res); + while (conflict->child) + conflict = ____request_resource(conflict, &res); if (!strcmp(conflict->name, "libata")) legacy_mode |= (1 << 0); else { disable_dev_on_err = 0; - printk(KERN_WARNING "ata: 0x1f0 IDE port busy\n"); + printk(KERN_WARNING "ata: 0x1f0 IDE port busy\n" \ + "ata: conflict with %s\n", conflict->name); } } else legacy_mode |= (1 << 0); @@ -1030,11 +1033,14 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, res.start = 0x170; res.end = 0x170 + 8 - 1; conflict = ____request_resource(&ioport_resource, &res); + while (conflict->child) + conflict = ____request_resource(conflict, &res); if (!strcmp(conflict->name, "libata")) legacy_mode |= (1 << 1); else { disable_dev_on_err = 0; - printk(KERN_WARNING "ata: 0x170 IDE port busy\n"); + printk(KERN_WARNING "ata: 0x170 IDE port busy\n" \ + "ata: conflict with %s\n", conflict->name); } } else legacy_mode |= (1 << 1); -- cgit v1.2.3 From fea63e38013ec628ab3f7fddc4c2148064b7910a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 16 Sep 2006 03:04:15 +0900 Subject: [PATCH] libata: fix non-uniform ports handling Non-uniform ports handling got broken while updating libata to handle those in the same host. Only separate irq for the non-uniform secondary port was implemented while all other fields (host flags, transfer mode...) of the secondary port simply shared those of the first. For ata_piix combined mode, which ATM is the only user of non-uniform ports, this causes the secondary port assume the wrong type. This can cause PATA port to use SATA ops, which results in bogus check on PCS and detection failure. This patch adds ata_probe_ent->pinfo2 which points to optional port_info for the secondary port. For the time being, this seems to be the simplest solution. This workaround will be removed together with ata_probe_ent itself after init model is updated to allow more flexibility. Signed-off-by: Tejun Heo Cc: Alan Cox Cc: Nelson A. de Oliveira Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 18 +++++++++++++----- drivers/ata/libata-sff.c | 2 ++ 2 files changed, 15 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 1c9315401f7..bb66a12c84e 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5269,11 +5269,19 @@ void ata_port_init(struct ata_port *ap, struct ata_host *host, ap->host = host; ap->dev = ent->dev; ap->port_no = port_no; - ap->pio_mask = ent->pio_mask; - ap->mwdma_mask = ent->mwdma_mask; - ap->udma_mask = ent->udma_mask; - ap->flags |= ent->port_flags; - ap->ops = ent->port_ops; + if (port_no == 1 && ent->pinfo2) { + ap->pio_mask = ent->pinfo2->pio_mask; + ap->mwdma_mask = ent->pinfo2->mwdma_mask; + ap->udma_mask = ent->pinfo2->udma_mask; + ap->flags |= ent->pinfo2->flags; + ap->ops = ent->pinfo2->port_ops; + } else { + ap->pio_mask = ent->pio_mask; + ap->mwdma_mask = ent->mwdma_mask; + ap->udma_mask = ent->udma_mask; + ap->flags |= ent->port_flags; + ap->ops = ent->port_ops; + } ap->hw_sata_spd_limit = UINT_MAX; ap->active_tag = ATA_TAG_POISON; ap->last_ctl = 0xFF; diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index d51dc41fa19..688bb55e197 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -858,6 +858,7 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int probe_ent->port[p].bmdma_addr = bmdma; } ata_std_ports(&probe_ent->port[p]); + probe_ent->pinfo2 = port[1]; p++; } @@ -907,6 +908,7 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, probe_ent->_host_flags |= ATA_HOST_SIMPLEX; } ata_std_ports(&probe_ent->port[1]); + probe_ent->pinfo2 = port[1]; } else probe_ent->dummy_port_mask |= ATA_PORT_SECONDARY; -- cgit v1.2.3 From 93590859884784520a1850767f86296abc2cdc6d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 12 Sep 2006 16:55:12 +0100 Subject: [PATCH] libata: improve handling of diagostic fail (and hardware that misreports it) Our ATA probe code checks that a device is not reporting a diagnostic failure during start up. Unfortunately at least one device seems to like doing this - the Gigabyte iRAM. This is only done for the master right now (which is fine for the iRAM as it is SATA), as with PATA some combinations of ATAPI device seem to fool the check into seeing a drive that isn't there if it is applied to the slave. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index e85c2f8cf19..753b0152afd 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -616,8 +616,11 @@ ata_dev_try_classify(struct ata_port *ap, unsigned int device, u8 *r_err) if (r_err) *r_err = err; - /* see if device passed diags */ - if (err == 1) + /* see if device passed diags: if master then continue and warn later */ + if (err == 0 && device == 0) + /* diagnostic fail : do nothing _YET_ */ + ap->device[device].horkage |= ATA_HORKAGE_DIAGNOSTIC; + else if (err == 1) /* do nothing */ ; else if ((device == 0) && (err == 0x81)) /* do nothing */ ; @@ -1523,6 +1526,18 @@ int ata_dev_configure(struct ata_device *dev, int print_info) cdb_intr_string); } + if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) { + /* Let the user know. We don't want to disallow opens for + rescue purposes, or in case the vendor is just a blithering + idiot */ + if (print_info) { + ata_dev_printk(dev, KERN_WARNING, +"Drive reports diagnostics failure. This may indicate a drive\n"); + ata_dev_printk(dev, KERN_WARNING, +"fault or invalid emulation. Contact drive vendor for information.\n"); + } + } + ata_set_port_max_cmd_len(ap); /* limit bridge transfers to udma5, 200 sectors */ -- cgit v1.2.3 From 36b35a5be0e4b406acd816e2122d153e875105be Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 20 Sep 2006 17:48:53 -0400 Subject: [libata] Delete pata_it8172 driver This MIPS platform is going away. Acked-by: Ralf Baechle Signed-off-by: Jeff Garzik --- drivers/ata/Kconfig | 9 -- drivers/ata/Makefile | 1 - drivers/ata/pata_it8172.c | 288 ---------------------------------------------- 3 files changed, 298 deletions(-) delete mode 100644 drivers/ata/pata_it8172.c (limited to 'drivers') diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index cbf0deb2503..5a8bdac5f5e 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -288,15 +288,6 @@ config PATA_ISAPNP If unsure, say N. -config PATA_IT8172 - tristate "IT8172 PATA support (Very Experimental)" - depends on PCI && EXPERIMENTAL - help - This option enables support for the ITE 8172 PATA controller - via the new ATA layer. - - If unsure, say N. - config PATA_IT821X tristate "IT821x PATA support (Experimental)" depends on PCI && EXPERIMENTAL diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index e42d14dbf03..72243a677f9 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -32,7 +32,6 @@ obj-$(CONFIG_PATA_HPT37X) += pata_hpt37x.o obj-$(CONFIG_PATA_HPT3X2N) += pata_hpt3x2n.o obj-$(CONFIG_PATA_HPT3X3) += pata_hpt3x3.o obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o -obj-$(CONFIG_PATA_IT8172) += pata_it8172.o obj-$(CONFIG_PATA_IT821X) += pata_it821x.o obj-$(CONFIG_PATA_JMICRON) += pata_jmicron.o obj-$(CONFIG_PATA_NETCELL) += pata_netcell.o diff --git a/drivers/ata/pata_it8172.c b/drivers/ata/pata_it8172.c deleted file mode 100644 index 53d35bb6fcf..00000000000 --- a/drivers/ata/pata_it8172.c +++ /dev/null @@ -1,288 +0,0 @@ -/* - * pata_it8172.c - IT8172 PATA for new ATA layer - * (C) 2005 Red Hat Inc - * Alan Cox - * - * Based heavily on - * - * BRIEF MODULE DESCRIPTION - * IT8172 IDE controller support - * - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * stevel@mvista.com or source@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * TODO - * Check for errata - * See if we really need to force native mode - * PIO timings (also lacking in original) - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "pata_it8172" -#define DRV_VERSION "0.3.1" - -static int it8172_pre_reset(struct ata_port *ap) -{ - static const struct pci_bits it8172_enable_bits[] = { - { 0x00, 0, 0x00, 0x00 }, - { 0x40, 1, 0x00, 0x01 } - }; - - struct pci_dev *pdev = to_pci_dev(ap->host->dev); - - if (ap->port_no && !pci_test_config_bits(pdev, &it8172_enable_bits[ap->port_no])) { - ata_port_disable(ap); - printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); - return 0; - } - ap->cbl = ATA_CBL_PATA40; - return ata_std_prereset(ap); -} - -static void it8172_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, it8172_pre_reset, ata_std_softreset, NULL, ata_std_postreset); -} - -/** - * it8172_set_pio_timing - set initial PIO mode data - * @ap: ATA interface - * @adev: ATA device - * - * Called by both the pio and dma setup functions to set the controller - * timings for PIO transfers. We must load both the mode number and - * timing values into the controller. - */ - -static void it8172_set_pio_timing(struct ata_port *ap, struct ata_device *adev, int pio) -{ - struct pci_dev *pdev = to_pci_dev(ap->host->dev); - u16 reg40; - - pci_read_config_word(pdev, 0x40, ®40); - - /* - * FIX! The DIOR/DIOW pulse width and recovery times in port 0x44 - * are being left at the default values of 8 PCI clocks (242 nsec - * for a 33 MHz clock). These can be safely shortened at higher - * PIO modes. The DIOR/DIOW pulse width and recovery times only - * apply to PIO modes, not to the DMA modes. - */ - - /* - * Enable port 0x44. The IT8172G spec is confused; it calls - * this register the "Slave IDE Timing Register", but in fact, - * it controls timing for both master and slave drives. - */ - - reg40 |= 0x4000; - if (adev->devno) { - reg40 &= 0xC006; - if (pio > 1) - /* Enable prefetch and IORDY sample-point */ - reg40 |= 0x0060; - } else { - reg40 &= 0xC060; - if (pio > 1) - /* Enable prefetch and IORDY sample-point */ - reg40 |= 0x0006; - } - /* Write back the enables */ - pci_write_config_word(pdev, 0x40, reg40); -} - -/** - * it8172_set_piomode - set initial PIO mode data - * @ap: ATA interface - * @adev: ATA device - * - * Called to do the PIO mode setup. We use a shared helper for this - * as the DMA setup must also adjust the PIO timing information. - */ - -static void it8172_set_piomode(struct ata_port *ap, struct ata_device *adev) -{ - it8172_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0); -} - -/** - * it8172_set_dmamode - set initial DMA mode data - * @ap: ATA interface - * @adev: ATA device - * - * Called to do the DMA mode setup. We must tune an appropriate PIO - * mode to match. - */ - -static void it8172_set_dmamode(struct ata_port *ap, struct ata_device *adev) -{ - struct pci_dev *pdev = to_pci_dev(ap->host->dev); - int dn = (2 * ap->port_no) + adev->devno; - u8 reg48, reg4a; - int pio; - - static const int pio_map[] = { 1, 3, 4}; - /* - * Setting the DMA cycle time to 2 or 3 PCI clocks (60 and 91 nsec - * at 33 MHz PCI clock) seems to cause BadCRC errors during DMA - * transfers on some drives, even though both numbers meet the minimum - * ATAPI-4 spec of 73 and 54 nsec for UDMA 1 and 2 respectively. - * So the faster times are just commented out here. The good news is - * that the slower cycle time has very little affect on transfer - * performance. - */ - - pci_read_config_byte(pdev, 0x48, ®48); - pci_read_config_byte(pdev, 0x4A, ®4a); - - reg4a &= ~(3 << (4 * dn)); - - if (adev->dma_mode >= XFER_UDMA_0) { - reg48 |= 1 << dn; -#ifdef UDMA_TIMING_SET - reg4a |= ((adev->dma_mode - XFER_UDMA_0) << (4 * dn)); -#endif - pio = 4; - } else { - pio = pio_map[adev->dma_mode - XFER_MW_DMA_0]; - reg48 &= ~ (1 << dn); - } - pci_write_config_byte(pdev, 0x48, reg48); - pci_write_config_byte(pdev, 0x4A, reg4a); - it8172_set_pio_timing(ap, adev, pio); - -} - -static struct scsi_host_template it8172_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .bios_param = ata_std_bios_param, -}; - -static struct ata_port_operations it8172_port_ops = { - .port_disable = ata_port_disable, - .set_piomode = it8172_set_piomode, - .set_dmamode = it8172_set_dmamode, - .mode_filter = ata_pci_default_filter, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = it8172_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - .eng_timeout = ata_eng_timeout, - .data_xfer = ata_pio_data_xfer, - - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop -}; - -static int it8172_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - static struct ata_port_info info = { - .sht = &it8172_sht, - .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, - .pio_mask = 0x1f, - .mwdma_mask = 0x06, /* No MWDMA0 support */ - .udma_mask = 0x7, - .port_ops = &it8172_port_ops - }; - static struct ata_port_info *port_info[2] = { &info, &info }; - - if ((!(PCI_FUNC(dev->devfn) & 1) || - (!((dev->class >> 8) == PCI_CLASS_STORAGE_IDE)))) - return -ENODEV; /* IT8172 is more than an IDE controller */ - - return ata_pci_init_one(dev, port_info, 2); -} - -static struct pci_device_id it8172[] = { - { PCI_DEVICE(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_IT8172G), }, - { 0, }, -}; - -static struct pci_driver it8172_pci_driver = { - .name = DRV_NAME, - .id_table = it8172, - .probe = it8172_init_one, - .remove = ata_pci_remove_one -}; - -static int __init it8172_init(void) -{ - return pci_register_driver(&it8172_pci_driver); -} - - -static void __exit it8172_exit(void) -{ - pci_unregister_driver(&it8172_pci_driver); -} - - -MODULE_AUTHOR("Alan Cox"); -MODULE_DESCRIPTION("low-level driver for ITE IT8172"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, it8172); -MODULE_VERSION(DRV_VERSION); - -module_init(it8172_init); -module_exit(it8172_exit); -- cgit v1.2.3