From 74b72a59b8d42d31aa6ffac8f10ca7a784be392c Mon Sep 17 00:00:00 2001 From: Jamie Wellnitz Date: Tue, 28 Feb 2006 22:33:04 -0500 Subject: [PATCH] lpfc 8.1.3: Derive supported speeds from LMT field in the READ_CONFIG Derive supported speeds from LMT field in the READ_CONFIG Driver was keying off internal cores. Use what the firmware reports instead. Signed-off-by: Jamie Wellnitz Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_ct.c | 24 +++--- drivers/scsi/lpfc/lpfc_hw.h | 14 ++-- drivers/scsi/lpfc/lpfc_init.c | 182 +++++++++++++++++++++++++----------------- 3 files changed, 126 insertions(+), 94 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c index 0c982bbc4c7..f3b280313a7 100644 --- a/drivers/scsi/lpfc/lpfc_ct.c +++ b/drivers/scsi/lpfc/lpfc_ct.c @@ -1014,19 +1014,19 @@ lpfc_fdmi_cmd(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp, int cmdcode) ae = (ATTRIBUTE_ENTRY *) ((uint8_t *) pab + size); ae->ad.bits.AttrType = be16_to_cpu(SUPPORTED_SPEED); ae->ad.bits.AttrLen = be16_to_cpu(FOURBYTES + 4); - if (FC_JEDEC_ID(vp->rev.biuRev) == VIPER_JEDEC_ID) + + ae->un.SupportSpeed = 0; + if (phba->lmt & LMT_10Gb) ae->un.SupportSpeed = HBA_PORTSPEED_10GBIT; - else if (FC_JEDEC_ID(vp->rev.biuRev) == HELIOS_JEDEC_ID) - ae->un.SupportSpeed = HBA_PORTSPEED_4GBIT; - else if ((FC_JEDEC_ID(vp->rev.biuRev) == - CENTAUR_2G_JEDEC_ID) - || (FC_JEDEC_ID(vp->rev.biuRev) == - PEGASUS_JEDEC_ID) - || (FC_JEDEC_ID(vp->rev.biuRev) == - THOR_JEDEC_ID)) - ae->un.SupportSpeed = HBA_PORTSPEED_2GBIT; - else - ae->un.SupportSpeed = HBA_PORTSPEED_1GBIT; + if (phba->lmt & LMT_8Gb) + ae->un.SupportSpeed |= HBA_PORTSPEED_8GBIT; + if (phba->lmt & LMT_4Gb) + ae->un.SupportSpeed |= HBA_PORTSPEED_4GBIT; + if (phba->lmt & LMT_2Gb) + ae->un.SupportSpeed |= HBA_PORTSPEED_2GBIT; + if (phba->lmt & LMT_1Gb) + ae->un.SupportSpeed |= HBA_PORTSPEED_1GBIT; + pab->ab.EntryCnt++; size += FOURBYTES + 4; diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index 98d39cea795..54d04188f7c 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -1711,13 +1711,13 @@ typedef struct { uint32_t rttov; uint32_t altov; uint32_t lmt; -#define LMT_RESERVED 0x0 /* Not used */ -#define LMT_266_10bit 0x1 /* 265.625 Mbaud 10 bit iface */ -#define LMT_532_10bit 0x2 /* 531.25 Mbaud 10 bit iface */ -#define LMT_1063_20bit 0x3 /* 1062.5 Mbaud 20 bit iface */ -#define LMT_1063_10bit 0x4 /* 1062.5 Mbaud 10 bit iface */ -#define LMT_2125_10bit 0x8 /* 2125 Mbaud 10 bit iface */ -#define LMT_4250_10bit 0x40 /* 4250 Mbaud 10 bit iface */ +#define LMT_RESERVED 0x000 /* Not used */ +#define LMT_1Gb 0x004 +#define LMT_2Gb 0x008 +#define LMT_4Gb 0x040 +#define LMT_8Gb 0x080 +#define LMT_10Gb 0x100 + uint32_t rsvd2; uint32_t rsvd3; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 391ca50293f..5fd98a34534 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -42,7 +42,7 @@ #include "lpfc_crtn.h" #include "lpfc_version.h" -static int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *); +static int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *, int); static void lpfc_get_hba_model_desc(struct lpfc_hba *, uint8_t *, uint8_t *); static int lpfc_post_rcv_buf(struct lpfc_hba *); @@ -161,9 +161,6 @@ lpfc_config_port_prep(struct lpfc_hba * phba) memcpy(phba->RandomData, (char *)&mb->un.varWords[24], sizeof (phba->RandomData)); - /* Get the default values for Model Name and Description */ - lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc); - /* Get adapter VPD information */ pmb->context2 = kmalloc(DMP_RSP_SIZE, GFP_KERNEL); if (!pmb->context2) @@ -182,16 +179,15 @@ lpfc_config_port_prep(struct lpfc_hba * phba) "mbxCmd x%x DUMP VPD, mbxStatus x%x\n", phba->brd_no, mb->mbxCommand, mb->mbxStatus); - kfree(lpfc_vpd_data); - lpfc_vpd_data = NULL; - break; + mb->un.varDmp.word_cnt = 0; } - + if (mb->un.varDmp.word_cnt > DMP_VPD_SIZE - offset) + mb->un.varDmp.word_cnt = DMP_VPD_SIZE - offset; lpfc_sli_pcimem_bcopy(pmb->context2, lpfc_vpd_data + offset, mb->un.varDmp.word_cnt); offset += mb->un.varDmp.word_cnt; - } while (mb->un.varDmp.word_cnt); - lpfc_parse_vpd(phba, lpfc_vpd_data); + } while (mb->un.varDmp.word_cnt && offset < DMP_VPD_SIZE); + lpfc_parse_vpd(phba, lpfc_vpd_data, offset); kfree(lpfc_vpd_data); out_free_context2: @@ -327,13 +323,22 @@ lpfc_config_port_post(struct lpfc_hba * phba) mb->un.varRdConfig.max_xri + 1; phba->lmt = mb->un.varRdConfig.lmt; - /* HBA is not 4GB capable, or HBA is not 2GB capable, - don't let link speed ask for it */ - if ((((phba->lmt & LMT_4250_10bit) != LMT_4250_10bit) && - (phba->cfg_link_speed > LINK_SPEED_2G)) || - (((phba->lmt & LMT_2125_10bit) != LMT_2125_10bit) && - (phba->cfg_link_speed > LINK_SPEED_1G))) { - /* Reset link speed to auto. 1G/2GB HBA cfg'd for 4G */ + + /* Get the default values for Model Name and Description */ + lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc); + + if ((phba->cfg_link_speed > LINK_SPEED_10G) + || ((phba->cfg_link_speed == LINK_SPEED_1G) + && !(phba->lmt & LMT_1Gb)) + || ((phba->cfg_link_speed == LINK_SPEED_2G) + && !(phba->lmt & LMT_2Gb)) + || ((phba->cfg_link_speed == LINK_SPEED_4G) + && !(phba->lmt & LMT_4Gb)) + || ((phba->cfg_link_speed == LINK_SPEED_8G) + && !(phba->lmt & LMT_8Gb)) + || ((phba->cfg_link_speed == LINK_SPEED_10G) + && !(phba->lmt & LMT_10Gb))) { + /* Reset link speed to auto */ lpfc_printf_log(phba, KERN_WARNING, LOG_LINK_EVENT, @@ -647,7 +652,7 @@ lpfc_handle_latt_err_exit: /* */ /************************************************************************/ static int -lpfc_parse_vpd(struct lpfc_hba * phba, uint8_t * vpd) +lpfc_parse_vpd(struct lpfc_hba * phba, uint8_t * vpd, int len) { uint8_t lenlo, lenhi; uint32_t Length; @@ -666,9 +671,10 @@ lpfc_parse_vpd(struct lpfc_hba * phba, uint8_t * vpd) phba->brd_no, (uint32_t) vpd[0], (uint32_t) vpd[1], (uint32_t) vpd[2], (uint32_t) vpd[3]); - do { + while (!finished && (index < (len - 4))) { switch (vpd[index]) { case 0x82: + case 0x91: index += 1; lenlo = vpd[index]; index += 1; @@ -684,7 +690,8 @@ lpfc_parse_vpd(struct lpfc_hba * phba, uint8_t * vpd) lenhi = vpd[index]; index += 1; Length = ((((unsigned short)lenhi) << 8) + lenlo); - + if (Length > len - index) + Length = len - index; while (Length > 0) { /* Look for Serial Number */ if ((vpd[index] == 'S') && (vpd[index+1] == 'N')) { @@ -778,7 +785,7 @@ lpfc_parse_vpd(struct lpfc_hba * phba, uint8_t * vpd) index ++; break; } - } while (!finished && (index < 108)); + } return(1); } @@ -790,124 +797,153 @@ lpfc_get_hba_model_desc(struct lpfc_hba * phba, uint8_t * mdp, uint8_t * descp) uint16_t dev_id = phba->pcidev->device; uint16_t dev_subid = phba->pcidev->subsystem_device; uint8_t hdrtype = phba->pcidev->hdr_type; - char *model_str = ""; + int max_speed; + char * ports = (hdrtype == 0x80) ? "2-port " : ""; + struct { + char * name; + int max_speed; + char * ports; + char * bus; + } m; + + if (mdp && mdp[0] != '\0' + && descp && descp[0] != '\0') + return; + + if (phba->lmt & LMT_10Gb) + max_speed = 10; + else if (phba->lmt & LMT_8Gb) + max_speed = 8; + else if (phba->lmt & LMT_4Gb) + max_speed = 4; + else if (phba->lmt & LMT_2Gb) + max_speed = 2; + else + max_speed = 1; vp = &phba->vpd; switch (dev_id) { case PCI_DEVICE_ID_FIREFLY: - model_str = "LP6000 1Gb PCI"; + m = (typeof(m)){"LP6000", max_speed, "", "PCI"}; break; case PCI_DEVICE_ID_SUPERFLY: if (vp->rev.biuRev >= 1 && vp->rev.biuRev <= 3) - model_str = "LP7000 1Gb PCI"; + m = (typeof(m)){"LP7000", max_speed, "", "PCI"}; else - model_str = "LP7000E 1Gb PCI"; + m = (typeof(m)){"LP7000E", max_speed, "", "PCI"}; break; case PCI_DEVICE_ID_DRAGONFLY: - model_str = "LP8000 1Gb PCI"; + m = (typeof(m)){"LP8000", max_speed, "", "PCI"}; break; case PCI_DEVICE_ID_CENTAUR: if (FC_JEDEC_ID(vp->rev.biuRev) == CENTAUR_2G_JEDEC_ID) - model_str = "LP9002 2Gb PCI"; + m = (typeof(m)){"LP9002", max_speed, "", "PCI"}; else - model_str = "LP9000 1Gb PCI"; + m = (typeof(m)){"LP9000", max_speed, "", "PCI"}; break; case PCI_DEVICE_ID_RFLY: - model_str = "LP952 2Gb PCI"; + m = (typeof(m)){"LP952", max_speed, "", "PCI"}; break; case PCI_DEVICE_ID_PEGASUS: - model_str = "LP9802 2Gb PCI-X"; + m = (typeof(m)){"LP9802", max_speed, "", "PCI-X"}; break; case PCI_DEVICE_ID_THOR: if (hdrtype == 0x80) - model_str = "LP10000DC 2Gb 2-port PCI-X"; + m = (typeof(m)){"LP10000DC", + max_speed, ports, "PCI-X"}; else - model_str = "LP10000 2Gb PCI-X"; + m = (typeof(m)){"LP10000", + max_speed, ports, "PCI-X"}; break; case PCI_DEVICE_ID_VIPER: - model_str = "LPX1000 10Gb PCI-X"; + m = (typeof(m)){"LPX1000", max_speed, "", "PCI-X"}; break; case PCI_DEVICE_ID_PFLY: - model_str = "LP982 2Gb PCI-X"; + m = (typeof(m)){"LP982", max_speed, "", "PCI-X"}; break; case PCI_DEVICE_ID_TFLY: if (hdrtype == 0x80) - model_str = "LP1050DC 2Gb 2-port PCI-X"; + m = (typeof(m)){"LP1050DC", max_speed, ports, "PCI-X"}; else - model_str = "LP1050 2Gb PCI-X"; + m = (typeof(m)){"LP1050", max_speed, ports, "PCI-X"}; break; case PCI_DEVICE_ID_HELIOS: if (hdrtype == 0x80) - model_str = "LP11002 4Gb 2-port PCI-X2"; + m = (typeof(m)){"LP11002", max_speed, ports, "PCI-X2"}; else - model_str = "LP11000 4Gb PCI-X2"; + m = (typeof(m)){"LP11000", max_speed, ports, "PCI-X2"}; break; case PCI_DEVICE_ID_HELIOS_SCSP: - model_str = "LP11000-SP 4Gb PCI-X2"; + m = (typeof(m)){"LP11000-SP", max_speed, ports, "PCI-X2"}; break; case PCI_DEVICE_ID_HELIOS_DCSP: - model_str = "LP11002-SP 4Gb 2-port PCI-X2"; + m = (typeof(m)){"LP11002-SP", max_speed, ports, "PCI-X2"}; break; case PCI_DEVICE_ID_NEPTUNE: if (hdrtype == 0x80) - model_str = "LPe1002 4Gb 2-port"; + m = (typeof(m)){"LPe1002", max_speed, ports, "PCIe"}; else - model_str = "LPe1000 4Gb PCIe"; + m = (typeof(m)){"LPe1000", max_speed, ports, "PCIe"}; break; case PCI_DEVICE_ID_NEPTUNE_SCSP: - model_str = "LPe1000-SP 4Gb PCIe"; + m = (typeof(m)){"LPe1000-SP", max_speed, ports, "PCIe"}; break; case PCI_DEVICE_ID_NEPTUNE_DCSP: - model_str = "LPe1002-SP 4Gb 2-port PCIe"; + m = (typeof(m)){"LPe1002-SP", max_speed, ports, "PCIe"}; break; case PCI_DEVICE_ID_BMID: - model_str = "LP1150 4Gb PCI-X2"; + m = (typeof(m)){"LP1150", max_speed, ports, "PCI-X2"}; break; case PCI_DEVICE_ID_BSMB: - model_str = "LP111 4Gb PCI-X2"; + m = (typeof(m)){"LP111", max_speed, ports, "PCI-X2"}; break; case PCI_DEVICE_ID_ZEPHYR: if (hdrtype == 0x80) - model_str = "LPe11002 4Gb 2-port PCIe"; + m = (typeof(m)){"LPe11002", max_speed, ports, "PCIe"}; else - model_str = "LPe11000 4Gb PCIe"; + m = (typeof(m)){"LPe11000", max_speed, ports, "PCIe"}; break; case PCI_DEVICE_ID_ZEPHYR_SCSP: - model_str = "LPe11000-SP 4Gb PCIe"; + m = (typeof(m)){"LPe11000", max_speed, ports, "PCIe"}; break; case PCI_DEVICE_ID_ZEPHYR_DCSP: - model_str = "LPe11002-SP 4Gb 2-port PCIe"; + m = (typeof(m)){"LPe11002-SP", max_speed, ports, "PCIe"}; break; case PCI_DEVICE_ID_ZMID: - model_str = "LPe1150 4Gb PCIe"; + m = (typeof(m)){"LPe1150", max_speed, ports, "PCIe"}; break; case PCI_DEVICE_ID_ZSMB: - model_str = "LPe111 4Gb PCIe"; + m = (typeof(m)){"LPe111", max_speed, ports, "PCIe"}; break; case PCI_DEVICE_ID_LP101: - model_str = "LP101 2Gb PCI-X"; + m = (typeof(m)){"LP101", max_speed, ports, "PCI-X"}; break; case PCI_DEVICE_ID_LP10000S: - model_str = "LP10000-S 2Gb PCI"; + m = (typeof(m)){"LP10000-S", max_speed, ports, "PCI"}; break; case PCI_DEVICE_ID_LP11000S: case PCI_DEVICE_ID_LPE11000S: switch (dev_subid) { case PCI_SUBSYSTEM_ID_LP11000S: - model_str = "LP11002-S 4Gb PCI-X2"; + m = (typeof(m)){"LP11000-S", max_speed, + ports, "PCI-X2"}; break; case PCI_SUBSYSTEM_ID_LP11002S: - model_str = "LP11000-S 4Gb 2-port PCI-X2"; + m = (typeof(m)){"LP11002-S", max_speed, + ports, "PCI-X2"}; break; case PCI_SUBSYSTEM_ID_LPE11000S: - model_str = "LPe11002-S 4Gb PCIe"; + m = (typeof(m)){"LPe11000-S", max_speed, + ports, "PCIe"}; break; case PCI_SUBSYSTEM_ID_LPE11002S: - model_str = "LPe11002-S 4Gb 2-port PCIe"; + m = (typeof(m)){"LPe11002-S", max_speed, + ports, "PCIe"}; break; case PCI_SUBSYSTEM_ID_LPE11010S: - model_str = "LPe11010-S 4Gb 10-port PCIe"; + m = (typeof(m)){"LPe11010-S", max_speed, + "10-port ", "PCIe"}; break; default: break; @@ -916,10 +952,13 @@ lpfc_get_hba_model_desc(struct lpfc_hba * phba, uint8_t * mdp, uint8_t * descp) default: break; } - if (mdp) - sscanf(model_str, "%s", mdp); - if (descp) - sprintf(descp, "Emulex %s Fibre Channel Adapter", model_str); + + if (mdp && mdp[0] == '\0') + snprintf(mdp, 79,"%s", m.name); + if (descp && descp[0] == '\0') + snprintf(descp, 255, + "Emulex %s %dGb %s%s Fibre Channel Adapter", + m.name, m.max_speed, m.ports, m.bus); } /**************************************************/ @@ -1627,21 +1666,14 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) lpfc_get_hba_sym_node_name(phba, fc_host_symbolic_name(host)); fc_host_supported_speeds(host) = 0; - switch (FC_JEDEC_ID(phba->vpd.rev.biuRev)) { - case VIPER_JEDEC_ID: + if (phba->lmt & LMT_10Gb) fc_host_supported_speeds(host) |= FC_PORTSPEED_10GBIT; - break; - case HELIOS_JEDEC_ID: + if (phba->lmt & LMT_4Gb) fc_host_supported_speeds(host) |= FC_PORTSPEED_4GBIT; - /* Fall through */ - case CENTAUR_2G_JEDEC_ID: - case PEGASUS_JEDEC_ID: - case THOR_JEDEC_ID: + if (phba->lmt & LMT_2Gb) fc_host_supported_speeds(host) |= FC_PORTSPEED_2GBIT; - /* Fall through */ - default: - fc_host_supported_speeds(host) = FC_PORTSPEED_1GBIT; - } + if (phba->lmt & LMT_1Gb) + fc_host_supported_speeds(host) |= FC_PORTSPEED_1GBIT; fc_host_maxframe_size(host) = ((((uint32_t) phba->fc_sparam.cmn.bbRcvSizeMsb & 0x0F) << 8) | -- cgit v1.2.3