From 4f842f6ba644a8e2360441aa73580373dbc3eb95 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Thu, 26 Jul 2012 15:50:49 +0100
Subject: regulator: core: Clarify grammar for dummy help text

Too many thens in the if...then clause.

Reported-by: Michael Jones <michael.jones@matrix-vision.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/Kconfig | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 4e932cc695e..17c41ad771c 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -33,9 +33,8 @@ config REGULATOR_DUMMY
 	help
 	  If this option is enabled then when a regulator lookup fails
 	  and the board has not specified that it has provided full
-	  constraints then the regulator core will provide an always
-	  enabled dummy regulator will be provided, allowing consumer
-	  drivers to continue.
+	  constraints the regulator core will provide an always
+	  enabled dummy regulator, allowing consumer drivers to continue.
 
 	  A warning will be generated when this substitution is done.
 
-- 
cgit v1.2.3


From 57ad526ae2c28d128fe0d9deeb428697151c849b Mon Sep 17 00:00:00 2001
From: Laxman Dewangan <ldewangan@nvidia.com>
Date: Mon, 23 Jul 2012 20:35:46 +0530
Subject: regulator: core: increment open_count when regulator supply is set

When registering the regulator and setting supply for the regulator
then increment open_count to reflect correct number of users.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/core.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers')

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index f092588a078..b28221af648 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -974,6 +974,7 @@ static int set_supply(struct regulator_dev *rdev,
 		err = -ENOMEM;
 		return err;
 	}
+	supply_rdev->open_count++;
 
 	return 0;
 }
-- 
cgit v1.2.3


From c6d678b632904261d07c39cd88d9e1bccdda2e37 Mon Sep 17 00:00:00 2001
From: Michael Jones <michael.jones@matrix-vision.de>
Date: Thu, 26 Jul 2012 16:07:23 +0200
Subject: regulator: Fix space/tab confusion

Signed-off-by: Michael Jones <michael.jones@matrix-vision.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/Kconfig | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 17c41ad771c..9bc77490463 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -49,11 +49,11 @@ config REGULATOR_VIRTUAL_CONSUMER
 	tristate "Virtual regulator consumer support"
 	help
 	  This driver provides a virtual consumer for the voltage and
-          current regulator API which provides sysfs controls for
-          configuring the supplies requested.  This is mainly useful
-          for test purposes.
+	  current regulator API which provides sysfs controls for
+	  configuring the supplies requested.  This is mainly useful
+	  for test purposes.
 
-          If unsure, say no.
+	  If unsure, say no.
 
 config REGULATOR_USERSPACE_CONSUMER
 	tristate "Userspace regulator consumer support"
@@ -62,7 +62,7 @@ config REGULATOR_USERSPACE_CONSUMER
 	  from user space. Userspace consumer driver provides ability to
 	  control power supplies for such devices.
 
-          If unsure, say no.
+	  If unsure, say no.
 
 config REGULATOR_GPIO
 	tristate "GPIO regulator support"
@@ -246,7 +246,7 @@ config REGULATOR_LP8788
 
 config REGULATOR_PCF50633
 	tristate "NXP PCF50633 regulator driver"
-        depends on MFD_PCF50633
+	depends on MFD_PCF50633
 	help
 	 Say Y here to support the voltage regulators and convertors
 	 on PCF50633
@@ -415,7 +415,7 @@ config REGULATOR_WM8350
 	depends on MFD_WM8350
 	help
 	  This driver provides support for the voltage and current regulators
-          of the WM8350 AudioPlus PMIC.
+	  of the WM8350 AudioPlus PMIC.
 
 config REGULATOR_WM8400
 	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
-- 
cgit v1.2.3


From 2f6c797f84fd764efb5eeb7cbb6a80a7244bd13c Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Mon, 6 Aug 2012 23:44:19 +0800
Subject: regulator: core: Fix cast to pointer from integer of different size
 warning

This is to address the following warning during compilation time: (Compile on x86_64)

  CC      drivers/regulator/core.o
drivers/regulator/core.c: In function '_regulator_do_set_voltage':
drivers/regulator/core.c:2183:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]

This patch adds a temporary variable to avoid double cast.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/core.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index b28221af648..5f2221095a4 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2179,9 +2179,12 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 		}
 	}
 
-	if (ret == 0 && best_val >= 0)
+	if (ret == 0 && best_val >= 0) {
+		unsigned long data = best_val;
+
 		_notifier_call_chain(rdev, REGULATOR_EVENT_VOLTAGE_CHANGE,
-				     (void *)best_val);
+				     (void *)data);
+	}
 
 	trace_regulator_set_voltage_complete(rdev_get_name(rdev), best_val);
 
-- 
cgit v1.2.3


From 215b8b055de7dad26ab6c10f70130934309cb696 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Tue, 7 Aug 2012 21:01:37 +0200
Subject: regulator: make the dummy regulator's print_constraint more helpful
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This prevents the output of just

	dummy:

in the boot log. Now it says:

	regulator-dummy: no parameters

which at least doesn't make it look like an accidental printk and also doesn't
only use "dummy" which could mean anything.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/core.c  | 3 +++
 drivers/regulator/dummy.c | 2 +-
 2 files changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 5f2221095a4..157def15ed7 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -778,6 +778,9 @@ static void print_constraints(struct regulator_dev *rdev)
 	if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY)
 		count += sprintf(buf + count, "standby");
 
+	if (!count)
+		sprintf(buf, "no parameters");
+
 	rdev_info(rdev, "%s\n", buf);
 
 	if ((constraints->min_uV != constraints->max_uV) &&
diff --git a/drivers/regulator/dummy.c b/drivers/regulator/dummy.c
index 86f655c7f7a..03a1d7c11ef 100644
--- a/drivers/regulator/dummy.c
+++ b/drivers/regulator/dummy.c
@@ -30,7 +30,7 @@ static struct regulator_init_data dummy_initdata;
 static struct regulator_ops dummy_ops;
 
 static struct regulator_desc dummy_desc = {
-	.name = "dummy",
+	.name = "regulator-dummy",
 	.id = -1,
 	.type = REGULATOR_VOLTAGE,
 	.owner = THIS_MODULE,
-- 
cgit v1.2.3


From f7df20ec323009bd2ea8e1c65f11bb43fd526c4f Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Thu, 9 Aug 2012 16:42:19 +0100
Subject: regulator: core: Use list_voltage() to read single voltage regulators

If the regulator doesn't supply a way of reading back the voltage but does
provide a list_voltage() operation then use that with a selector of zero
to read the voltage.  Regulators doing this means that we have the list
operation there for consumers that want to configure themselves.

Reported-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/core.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers')

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 157def15ed7..ff8f5444730 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2395,6 +2395,8 @@ static int _regulator_get_voltage(struct regulator_dev *rdev)
 		ret = rdev->desc->ops->list_voltage(rdev, sel);
 	} else if (rdev->desc->ops->get_voltage) {
 		ret = rdev->desc->ops->get_voltage(rdev);
+	} else if (rdev->desc->ops->list_voltage) {
+		ret = rdev->desc->ops->list_voltage(rdev, 0);
 	} else {
 		return -EINVAL;
 	}
-- 
cgit v1.2.3


From 296c656616bd567b2849f5a8a444452c4849ac01 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <rdunlap@xenotime.net>
Date: Sat, 18 Aug 2012 17:44:14 -0700
Subject: regulator: fix kernel-doc warnings in drivers/regulator/core.c

Fix regulator kernel-doc warnings:

Warning(drivers/regulator/core.c:2308): No description found for parameter 'rdev'
Warning(drivers/regulator/core.c:2308): Excess function parameter 'regulator' description in 'regulator_set_voltage_time_sel'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc:	Liam Girdwood <lrg@ti.com>
Cc:	Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index ff8f5444730..2a3e4213865 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2298,8 +2298,8 @@ int regulator_set_voltage_time(struct regulator *regulator,
 EXPORT_SYMBOL_GPL(regulator_set_voltage_time);
 
 /**
- *regulator_set_voltage_time_sel - get raise/fall time
- * @regulator: regulator source
+ * regulator_set_voltage_time_sel - get raise/fall time
+ * @rdev: regulator source device
  * @old_selector: selector for starting voltage
  * @new_selector: selector for target voltage
  *
-- 
cgit v1.2.3


From ad46ed14cac14073803371f12922e7ee37e98624 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Fri, 13 Jul 2012 10:12:40 +0800
Subject: regulator: s2mps11: Use array to save pointer to rdev

The number of regulator is known at compile time, use array to save pointer to
rdev makes the code simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/s2mps11.c | 27 ++++++++-------------------
 1 file changed, 8 insertions(+), 19 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 4669dc9ac74..926f9c8f2fa 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -24,7 +24,7 @@
 #include <linux/mfd/samsung/s2mps11.h>
 
 struct s2mps11_info {
-	struct regulator_dev **rdev;
+	struct regulator_dev *rdev[S2MPS11_REGULATOR_MAX];
 
 	int ramp_delay2;
 	int ramp_delay34;
@@ -236,9 +236,8 @@ static __devinit int s2mps11_pmic_probe(struct platform_device *pdev)
 	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
 	struct sec_platform_data *pdata = dev_get_platdata(iodev->dev);
 	struct regulator_config config = { };
-	struct regulator_dev **rdev;
 	struct s2mps11_info *s2mps11;
-	int i, ret, size;
+	int i, ret;
 	unsigned char ramp_enable, ramp_reg = 0;
 
 	if (!pdata) {
@@ -251,13 +250,6 @@ static __devinit int s2mps11_pmic_probe(struct platform_device *pdev)
 	if (!s2mps11)
 		return -ENOMEM;
 
-	size = sizeof(struct regulator_dev *) * S2MPS11_REGULATOR_MAX;
-	s2mps11->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
-	if (!s2mps11->rdev) {
-		return -ENOMEM;
-	}
-
-	rdev = s2mps11->rdev;
 	platform_set_drvdata(pdev, s2mps11);
 
 	s2mps11->ramp_delay2 = pdata->buck2_ramp_delay;
@@ -297,12 +289,12 @@ static __devinit int s2mps11_pmic_probe(struct platform_device *pdev)
 		config.init_data = pdata->regulators[i].initdata;
 		config.driver_data = s2mps11;
 
-		rdev[i] = regulator_register(&regulators[i], &config);
-		if (IS_ERR(rdev[i])) {
-			ret = PTR_ERR(rdev[i]);
+		s2mps11->rdev[i] = regulator_register(&regulators[i], &config);
+		if (IS_ERR(s2mps11->rdev[i])) {
+			ret = PTR_ERR(s2mps11->rdev[i]);
 			dev_err(&pdev->dev, "regulator init failed for %d\n",
 				i);
-			rdev[i] = NULL;
+			s2mps11->rdev[i] = NULL;
 			goto err;
 		}
 	}
@@ -310,8 +302,7 @@ static __devinit int s2mps11_pmic_probe(struct platform_device *pdev)
 	return 0;
 err:
 	for (i = 0; i < S2MPS11_REGULATOR_MAX; i++)
-		if (rdev[i])
-			regulator_unregister(rdev[i]);
+		regulator_unregister(s2mps11->rdev[i]);
 
 	return ret;
 }
@@ -319,12 +310,10 @@ err:
 static int __devexit s2mps11_pmic_remove(struct platform_device *pdev)
 {
 	struct s2mps11_info *s2mps11 = platform_get_drvdata(pdev);
-	struct regulator_dev **rdev = s2mps11->rdev;
 	int i;
 
 	for (i = 0; i < S2MPS11_REGULATOR_MAX; i++)
-		if (rdev[i])
-			regulator_unregister(rdev[i]);
+		regulator_unregister(s2mps11->rdev[i]);
 
 	return 0;
 }
-- 
cgit v1.2.3


From 13407ea802ad8ca4e830cee344e2d38dbce730f5 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Fri, 13 Jul 2012 23:01:14 +0800
Subject: regulator: mc13xxx: Populate selector from
 mc13xxx_fixed_regulator_set_voltage

This was missing until now and the underlying
_regulator_do_set_voltage is using this value when calling list_voltage.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/mc13xxx-regulator-core.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/mc13xxx-regulator-core.c b/drivers/regulator/mc13xxx-regulator-core.c
index d6eda28ca5d..8151889745e 100644
--- a/drivers/regulator/mc13xxx-regulator-core.c
+++ b/drivers/regulator/mc13xxx-regulator-core.c
@@ -143,10 +143,12 @@ int mc13xxx_fixed_regulator_set_voltage(struct regulator_dev *rdev, int min_uV,
 		__func__, id, min_uV, max_uV);
 
 	if (min_uV <= rdev->desc->volt_table[0] &&
-	    rdev->desc->volt_table[0] <= max_uV)
+	    rdev->desc->volt_table[0] <= max_uV) {
+		*selector = 0;
 		return 0;
-	else
+	} else {
 		return -EINVAL;
+	}
 }
 EXPORT_SYMBOL_GPL(mc13xxx_fixed_regulator_set_voltage);
 
-- 
cgit v1.2.3


From 78292f4ed2aa9f92eb7bef1e0e1cea14b705e378 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Sat, 14 Jul 2012 13:37:13 +0800
Subject: regulator: twl: Fix checking voltage range in
 twl6030smps_set_voltage()

The voltage selection logic is supposed to find the samllest voltage falls
within specified range. When using equation to calculate vsel, we need to
ensure the requested min_uV meet the range of using the equation.
Otherwise we may select a voltage that is out of specified range.

For example, in the case vsel = 62 means select voltage of 2100000uV.
What we want is to ensure the requested min_uV <= 2100000 rather than checking
max_uV >= 2100000. And this also means in the case min_uV > 2100000, vsel = 62
does not meet the request.

Also calling twl6030smps_list_voltage() for all cases to ensure the selected
voltage still in bounds.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/twl-regulator.c | 36 ++++++++++++++++--------------------
 1 file changed, 16 insertions(+), 20 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index 77a71a5c17c..3203411e992 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -762,32 +762,28 @@ twl6030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV,
 			unsigned int *selector)
 {
 	struct twlreg_info	*info = rdev_get_drvdata(rdev);
-	int	vsel = 0;
+	int vsel = 0, calc_uV;
 
 	switch (info->flags) {
 	case 0:
 		if (min_uV == 0)
 			vsel = 0;
 		else if ((min_uV >= 600000) && (min_uV <= 1300000)) {
-			int calc_uV;
 			vsel = DIV_ROUND_UP(min_uV - 600000, 12500);
 			vsel++;
-			calc_uV = twl6030smps_list_voltage(rdev, vsel);
-			if (calc_uV > max_uV)
-				return -EINVAL;
 		}
 		/* Values 1..57 for vsel are linear and can be calculated
 		 * values 58..62 are non linear.
 		 */
-		else if ((min_uV > 1900000) && (max_uV >= 2100000))
+		else if ((min_uV > 1900000) && (min_uV <= 2100000))
 			vsel = 62;
-		else if ((min_uV > 1800000) && (max_uV >= 1900000))
+		else if ((min_uV > 1800000) && (min_uV <= 1900000))
 			vsel = 61;
-		else if ((min_uV > 1500000) && (max_uV >= 1800000))
+		else if ((min_uV > 1500000) && (min_uV <= 1800000))
 			vsel = 60;
-		else if ((min_uV > 1350000) && (max_uV >= 1500000))
+		else if ((min_uV > 1350000) && (min_uV <= 1500000))
 			vsel = 59;
-		else if ((min_uV > 1300000) && (max_uV >= 1350000))
+		else if ((min_uV > 1300000) && (min_uV <= 1350000))
 			vsel = 58;
 		else
 			return -EINVAL;
@@ -796,25 +792,21 @@ twl6030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV,
 		if (min_uV == 0)
 			vsel = 0;
 		else if ((min_uV >= 700000) && (min_uV <= 1420000)) {
-			int calc_uV;
 			vsel = DIV_ROUND_UP(min_uV - 700000, 12500);
 			vsel++;
-			calc_uV = twl6030smps_list_voltage(rdev, vsel);
-			if (calc_uV > max_uV)
-				return -EINVAL;
 		}
 		/* Values 1..57 for vsel are linear and can be calculated
 		 * values 58..62 are non linear.
 		 */
-		else if ((min_uV > 1900000) && (max_uV >= 2100000))
+		else if ((min_uV > 1900000) && (min_uV <= 2100000))
 			vsel = 62;
-		else if ((min_uV > 1800000) && (max_uV >= 1900000))
+		else if ((min_uV > 1800000) && (min_uV <= 1900000))
 			vsel = 61;
-		else if ((min_uV > 1350000) && (max_uV >= 1800000))
+		else if ((min_uV > 1350000) && (min_uV <= 1800000))
 			vsel = 60;
-		else if ((min_uV > 1350000) && (max_uV >= 1500000))
+		else if ((min_uV > 1350000) && (min_uV <= 1500000))
 			vsel = 59;
-		else if ((min_uV > 1300000) && (max_uV >= 1350000))
+		else if ((min_uV > 1300000) && (min_uV <= 1350000))
 			vsel = 58;
 		else
 			return -EINVAL;
@@ -830,13 +822,17 @@ twl6030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV,
 	case SMPS_OFFSET_EN|SMPS_EXTENDED_EN:
 		if (min_uV == 0) {
 			vsel = 0;
-		} else if ((min_uV >= 2161000) && (max_uV <= 4321000)) {
+		} else if ((min_uV >= 2161000) && (min_uV <= 4321000)) {
 			vsel = DIV_ROUND_UP(min_uV - 2161000, 38600);
 			vsel++;
 		}
 		break;
 	}
 
+	calc_uV = twl6030smps_list_voltage(rdev, vsel);
+	if (calc_uV > max_uV)
+		return -EINVAL;
+
 	*selector = vsel;
 
 	return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE_SMPS,
-- 
cgit v1.2.3


From 38f8f43cbafe9ad07fdde31d28ed0c6933ac1e2e Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Sat, 14 Jul 2012 13:41:23 +0800
Subject: regulator: twl: Convert twlsmps_ops to get_voltage_sel and
 map_voltage

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/twl-regulator.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index 3203411e992..89d447dd583 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -757,12 +757,11 @@ static int twl6030smps_list_voltage(struct regulator_dev *rdev, unsigned index)
 	return voltage;
 }
 
-static int
-twl6030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV,
-			unsigned int *selector)
+static int twl6030smps_map_voltage(struct regulator_dev *rdev, int min_uV,
+				   int max_uV)
 {
-	struct twlreg_info	*info = rdev_get_drvdata(rdev);
-	int vsel = 0, calc_uV;
+	struct twlreg_info *info = rdev_get_drvdata(rdev);
+	int vsel = 0;
 
 	switch (info->flags) {
 	case 0:
@@ -829,14 +828,16 @@ twl6030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV,
 		break;
 	}
 
-	calc_uV = twl6030smps_list_voltage(rdev, vsel);
-	if (calc_uV > max_uV)
-		return -EINVAL;
+	return vsel;
+}
 
-	*selector = vsel;
+static int twl6030smps_set_voltage_sel(struct regulator_dev *rdev,
+				       unsigned int selector)
+{
+	struct twlreg_info *info = rdev_get_drvdata(rdev);
 
 	return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE_SMPS,
-							vsel);
+			    selector);
 }
 
 static int twl6030smps_get_voltage_sel(struct regulator_dev *rdev)
@@ -848,8 +849,9 @@ static int twl6030smps_get_voltage_sel(struct regulator_dev *rdev)
 
 static struct regulator_ops twlsmps_ops = {
 	.list_voltage		= twl6030smps_list_voltage,
+	.map_voltage		= twl6030smps_map_voltage,
 
-	.set_voltage		= twl6030smps_set_voltage,
+	.set_voltage_sel	= twl6030smps_set_voltage_sel,
 	.get_voltage_sel	= twl6030smps_get_voltage_sel,
 
 	.enable			= twl6030reg_enable,
-- 
cgit v1.2.3


From 4a247a961aaa0c611c68b56da3962c387c8e2e84 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Wed, 18 Jul 2012 12:34:08 +0800
Subject: regulator: palmas: Convert palmas_ops_ldo to
 [get|set]_voltage_sel_regmap

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/palmas-regulator.c | 45 ++++--------------------------------
 1 file changed, 5 insertions(+), 40 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index 46c7e88f838..2ba7502fa3b 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -443,44 +443,6 @@ static int palmas_list_voltage_ldo(struct regulator_dev *dev,
 	return  850000 + (selector * 50000);
 }
 
-static int palmas_get_voltage_ldo_sel(struct regulator_dev *dev)
-{
-	struct palmas_pmic *pmic = rdev_get_drvdata(dev);
-	int id = rdev_get_id(dev);
-	int selector;
-	unsigned int reg;
-	unsigned int addr;
-
-	addr = palmas_regs_info[id].vsel_addr;
-
-	palmas_ldo_read(pmic->palmas, addr, &reg);
-
-	selector = reg & PALMAS_LDO1_VOLTAGE_VSEL_MASK;
-
-	/* Adjust selector to match list_voltage ranges */
-	if (selector > 49)
-		selector = 49;
-
-	return selector;
-}
-
-static int palmas_set_voltage_ldo_sel(struct regulator_dev *dev,
-		unsigned selector)
-{
-	struct palmas_pmic *pmic = rdev_get_drvdata(dev);
-	int id = rdev_get_id(dev);
-	unsigned int reg = 0;
-	unsigned int addr;
-
-	addr = palmas_regs_info[id].vsel_addr;
-
-	reg = selector;
-
-	palmas_ldo_write(pmic->palmas, addr, reg);
-
-	return 0;
-}
-
 static int palmas_map_voltage_ldo(struct regulator_dev *rdev,
 		int min_uV, int max_uV)
 {
@@ -505,8 +467,8 @@ static struct regulator_ops palmas_ops_ldo = {
 	.is_enabled		= palmas_is_enabled_ldo,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
-	.get_voltage_sel	= palmas_get_voltage_ldo_sel,
-	.set_voltage_sel	= palmas_set_voltage_ldo_sel,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 	.list_voltage		= palmas_list_voltage_ldo,
 	.map_voltage		= palmas_map_voltage_ldo,
 };
@@ -757,6 +719,9 @@ static __devinit int palmas_probe(struct platform_device *pdev)
 
 		pmic->desc[id].type = REGULATOR_VOLTAGE;
 		pmic->desc[id].owner = THIS_MODULE;
+		pmic->desc[id].vsel_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
+						palmas_regs_info[id].vsel_addr);
+		pmic->desc[id].vsel_mask = PALMAS_LDO1_VOLTAGE_VSEL_MASK;
 		pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
 						palmas_regs_info[id].ctrl_addr);
 		pmic->desc[id].enable_mask = PALMAS_LDO1_CTRL_MODE_ACTIVE;
-- 
cgit v1.2.3


From 2a2c3ac0a584246cf9fdab69941b8aad54749581 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Thu, 19 Jul 2012 11:16:06 +0800
Subject: regulator: mc13783: Make mc13783_powermisc_rmw() lock protected

Then we can remove lock/unlock around the caller.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/mc13783-regulator.c | 22 ++++++++--------------
 1 file changed, 8 insertions(+), 14 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/mc13783-regulator.c b/drivers/regulator/mc13783-regulator.c
index 4932e3449fe..2587ea1f743 100644
--- a/drivers/regulator/mc13783-regulator.c
+++ b/drivers/regulator/mc13783-regulator.c
@@ -238,9 +238,10 @@ static int mc13783_powermisc_rmw(struct mc13xxx_regulator_priv *priv, u32 mask,
 
 	BUG_ON(val & ~mask);
 
+	mc13xxx_lock(priv->mc13xxx);
 	ret = mc13xxx_reg_read(mc13783, MC13783_REG_POWERMISC, &valread);
 	if (ret)
-		return ret;
+		goto out;
 
 	/* Update the stored state for Power Gates. */
 	priv->powermisc_pwgt_state =
@@ -253,7 +254,10 @@ static int mc13783_powermisc_rmw(struct mc13xxx_regulator_priv *priv, u32 mask,
 	valread = (valread & ~MC13783_REG_POWERMISC_PWGTSPI_M) |
 						priv->powermisc_pwgt_state;
 
-	return mc13xxx_reg_write(mc13783, MC13783_REG_POWERMISC, valread);
+	ret = mc13xxx_reg_write(mc13783, MC13783_REG_POWERMISC, valread);
+out:
+	mc13xxx_unlock(priv->mc13xxx);
+	return ret;
 }
 
 static int mc13783_gpo_regulator_enable(struct regulator_dev *rdev)
@@ -261,7 +265,6 @@ static int mc13783_gpo_regulator_enable(struct regulator_dev *rdev)
 	struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev);
 	struct mc13xxx_regulator *mc13xxx_regulators = priv->mc13xxx_regulators;
 	int id = rdev_get_id(rdev);
-	int ret;
 	u32 en_val = mc13xxx_regulators[id].enable_bit;
 
 	dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id);
@@ -271,12 +274,8 @@ static int mc13783_gpo_regulator_enable(struct regulator_dev *rdev)
 	    id == MC13783_REG_PWGT2SPI)
 		en_val = 0;
 
-	mc13xxx_lock(priv->mc13xxx);
-	ret = mc13783_powermisc_rmw(priv, mc13xxx_regulators[id].enable_bit,
+	return mc13783_powermisc_rmw(priv, mc13xxx_regulators[id].enable_bit,
 					en_val);
-	mc13xxx_unlock(priv->mc13xxx);
-
-	return ret;
 }
 
 static int mc13783_gpo_regulator_disable(struct regulator_dev *rdev)
@@ -284,7 +283,6 @@ static int mc13783_gpo_regulator_disable(struct regulator_dev *rdev)
 	struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev);
 	struct mc13xxx_regulator *mc13xxx_regulators = priv->mc13xxx_regulators;
 	int id = rdev_get_id(rdev);
-	int ret;
 	u32 dis_val = 0;
 
 	dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id);
@@ -294,12 +292,8 @@ static int mc13783_gpo_regulator_disable(struct regulator_dev *rdev)
 	    id == MC13783_REG_PWGT2SPI)
 		dis_val = mc13xxx_regulators[id].enable_bit;
 
-	mc13xxx_lock(priv->mc13xxx);
-	ret = mc13783_powermisc_rmw(priv, mc13xxx_regulators[id].enable_bit,
+	return mc13783_powermisc_rmw(priv, mc13xxx_regulators[id].enable_bit,
 					dis_val);
-	mc13xxx_unlock(priv->mc13xxx);
-
-	return ret;
 }
 
 static int mc13783_gpo_regulator_is_enabled(struct regulator_dev *rdev)
-- 
cgit v1.2.3


From 825d105910d549e69748b19f83031b231152ac9d Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Thu, 19 Jul 2012 11:17:15 +0800
Subject: regulator: mc13892: Make mc13892_powermisc_rmw() lock protected

Then we can remove lock/unlock around the caller.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/mc13892-regulator.c | 22 ++++++++--------------
 1 file changed, 8 insertions(+), 14 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/mc13892-regulator.c b/drivers/regulator/mc13892-regulator.c
index b388b746452..9d4296b96ad 100644
--- a/drivers/regulator/mc13892-regulator.c
+++ b/drivers/regulator/mc13892-regulator.c
@@ -305,9 +305,10 @@ static int mc13892_powermisc_rmw(struct mc13xxx_regulator_priv *priv, u32 mask,
 
 	BUG_ON(val & ~mask);
 
+	mc13xxx_lock(priv->mc13xxx);
 	ret = mc13xxx_reg_read(mc13892, MC13892_POWERMISC, &valread);
 	if (ret)
-		return ret;
+		goto out;
 
 	/* Update the stored state for Power Gates. */
 	priv->powermisc_pwgt_state =
@@ -320,14 +321,16 @@ static int mc13892_powermisc_rmw(struct mc13xxx_regulator_priv *priv, u32 mask,
 	valread = (valread & ~MC13892_POWERMISC_PWGTSPI_M) |
 		priv->powermisc_pwgt_state;
 
-	return mc13xxx_reg_write(mc13892, MC13892_POWERMISC, valread);
+	ret = mc13xxx_reg_write(mc13892, MC13892_POWERMISC, valread);
+out:
+	mc13xxx_unlock(priv->mc13xxx);
+	return ret;
 }
 
 static int mc13892_gpo_regulator_enable(struct regulator_dev *rdev)
 {
 	struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev);
 	int id = rdev_get_id(rdev);
-	int ret;
 	u32 en_val = mc13892_regulators[id].enable_bit;
 	u32 mask = mc13892_regulators[id].enable_bit;
 
@@ -340,18 +343,13 @@ static int mc13892_gpo_regulator_enable(struct regulator_dev *rdev)
 	if (id == MC13892_GPO4)
 		mask |= MC13892_POWERMISC_GPO4ADINEN;
 
-	mc13xxx_lock(priv->mc13xxx);
-	ret = mc13892_powermisc_rmw(priv, mask, en_val);
-	mc13xxx_unlock(priv->mc13xxx);
-
-	return ret;
+	return mc13892_powermisc_rmw(priv, mask, en_val);
 }
 
 static int mc13892_gpo_regulator_disable(struct regulator_dev *rdev)
 {
 	struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev);
 	int id = rdev_get_id(rdev);
-	int ret;
 	u32 dis_val = 0;
 
 	dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id);
@@ -360,12 +358,8 @@ static int mc13892_gpo_regulator_disable(struct regulator_dev *rdev)
 	if (id == MC13892_PWGT1SPI || id == MC13892_PWGT2SPI)
 		dis_val = mc13892_regulators[id].enable_bit;
 
-	mc13xxx_lock(priv->mc13xxx);
-	ret = mc13892_powermisc_rmw(priv, mc13892_regulators[id].enable_bit,
+	return mc13892_powermisc_rmw(priv, mc13892_regulators[id].enable_bit,
 		dis_val);
-	mc13xxx_unlock(priv->mc13xxx);
-
-	return ret;
 }
 
 static int mc13892_gpo_regulator_is_enabled(struct regulator_dev *rdev)
-- 
cgit v1.2.3


From 8db98440facad7e3a194f21ce6069e04bff336c6 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Thu, 19 Jul 2012 15:10:31 +0800
Subject: regulator: mc13892: Simplify implementation of
 mc13892_sw_regulator_set_voltage_sel()

Use mc13xxx_reg_rmw rather than a mc13xxx_reg_read and a mc13xxx_reg_write calls.

This logic to set MC13892_SWITCHERS0_SWxHI bit is pretty simple:

if (volt > 1375000)
        set MC13892_SWITCHERS0_SWxHI bit
else if (volt < 1100000)
        clear MC13892_SWITCHERS0_SWxHI bit
else
        leave MC13892_SWITCHERS0_SWxHI bit untouched

We already know the selector, so we don't need to calculate the selector again.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/mc13892-regulator.c | 42 +++++++++++++----------------------
 1 file changed, 15 insertions(+), 27 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/mc13892-regulator.c b/drivers/regulator/mc13892-regulator.c
index 9d4296b96ad..5d1d487c47a 100644
--- a/drivers/regulator/mc13892-regulator.c
+++ b/drivers/regulator/mc13892-regulator.c
@@ -426,37 +426,25 @@ static int mc13892_sw_regulator_set_voltage_sel(struct regulator_dev *rdev,
 						unsigned selector)
 {
 	struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev);
-	int hi, value, mask, id = rdev_get_id(rdev);
-	u32 valread;
+	int volt, mask, id = rdev_get_id(rdev);
+	u32 reg_value;
 	int ret;
 
-	value = rdev->desc->volt_table[selector];
+	volt = rdev->desc->volt_table[selector];
+	mask = mc13892_regulators[id].vsel_mask;
+	reg_value = selector << mc13892_regulators[id].vsel_shift;
 
-	mc13xxx_lock(priv->mc13xxx);
-	ret = mc13xxx_reg_read(priv->mc13xxx,
-		mc13892_regulators[id].vsel_reg, &valread);
-	if (ret)
-		goto err;
+	if (volt > 1375000) {
+		mask |= MC13892_SWITCHERS0_SWxHI;
+		reg_value |= MC13892_SWITCHERS0_SWxHI;
+	} else if (volt < 1100000) {
+		mask |= MC13892_SWITCHERS0_SWxHI;
+		reg_value &= ~MC13892_SWITCHERS0_SWxHI;
+	}
 
-	if (value > 1375000)
-		hi = 1;
-	else if (value < 1100000)
-		hi = 0;
-	else
-		hi = valread & MC13892_SWITCHERS0_SWxHI;
-
-	if (hi) {
-		value = (value - 1100000) / 25000;
-		value |= MC13892_SWITCHERS0_SWxHI;
-	} else
-		value = (value - 600000) / 25000;
-
-	mask = mc13892_regulators[id].vsel_mask | MC13892_SWITCHERS0_SWxHI;
-	valread = (valread & ~mask) |
-			(value << mc13892_regulators[id].vsel_shift);
-	ret = mc13xxx_reg_write(priv->mc13xxx, mc13892_regulators[id].vsel_reg,
-			valread);
-err:
+	mc13xxx_lock(priv->mc13xxx);
+	ret = mc13xxx_reg_rmw(priv->mc13xxx, mc13892_regulators[id].reg, mask,
+			      reg_value);
 	mc13xxx_unlock(priv->mc13xxx);
 
 	return ret;
-- 
cgit v1.2.3


From f1dcf9e4ed3261bdb22fead50e8bed7bd569bd2a Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Thu, 19 Jul 2012 15:11:39 +0800
Subject: regulator: mc13892: Convert mc13892_sw_regulator_ops to
 get_voltage_sel

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/mc13892-regulator.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/mc13892-regulator.c b/drivers/regulator/mc13892-regulator.c
index 5d1d487c47a..09265f02ed3 100644
--- a/drivers/regulator/mc13892-regulator.c
+++ b/drivers/regulator/mc13892-regulator.c
@@ -393,11 +393,11 @@ static struct regulator_ops mc13892_gpo_regulator_ops = {
 	.get_voltage = mc13xxx_fixed_regulator_get_voltage,
 };
 
-static int mc13892_sw_regulator_get_voltage(struct regulator_dev *rdev)
+static int mc13892_sw_regulator_get_voltage_sel(struct regulator_dev *rdev)
 {
 	struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev);
 	int ret, id = rdev_get_id(rdev);
-	unsigned int val, hi;
+	unsigned int val;
 
 	dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id);
 
@@ -408,17 +408,11 @@ static int mc13892_sw_regulator_get_voltage(struct regulator_dev *rdev)
 	if (ret)
 		return ret;
 
-	hi  = val & MC13892_SWITCHERS0_SWxHI;
 	val = (val & mc13892_regulators[id].vsel_mask)
 		>> mc13892_regulators[id].vsel_shift;
 
 	dev_dbg(rdev_get_dev(rdev), "%s id: %d val: %d\n", __func__, id, val);
 
-	if (hi)
-		val = (25000 * val) + 1100000;
-	else
-		val = (25000 * val) + 600000;
-
 	return val;
 }
 
@@ -453,7 +447,7 @@ static int mc13892_sw_regulator_set_voltage_sel(struct regulator_dev *rdev,
 static struct regulator_ops mc13892_sw_regulator_ops = {
 	.list_voltage = regulator_list_voltage_table,
 	.set_voltage_sel = mc13892_sw_regulator_set_voltage_sel,
-	.get_voltage = mc13892_sw_regulator_get_voltage,
+	.get_voltage_sel = mc13892_sw_regulator_get_voltage_sel,
 };
 
 static int mc13892_vcam_set_mode(struct regulator_dev *rdev, unsigned int mode)
-- 
cgit v1.2.3


From 74c8cfdaa6865a6d47018d2d0606a6fd0053812f Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Fri, 20 Jul 2012 20:31:19 +0800
Subject: regulator: lp8788-ldo: Set n_voltages to 1 for fixed voltage

For fixed voltage, the n_voltages should be 1 rather than 0.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/lp8788-ldo.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers')

diff --git a/drivers/regulator/lp8788-ldo.c b/drivers/regulator/lp8788-ldo.c
index d2122e41a96..6796eeb47dc 100644
--- a/drivers/regulator/lp8788-ldo.c
+++ b/drivers/regulator/lp8788-ldo.c
@@ -496,6 +496,7 @@ static struct regulator_desc lp8788_dldo_desc[] = {
 		.name = "dldo12",
 		.id = DLDO12,
 		.ops = &lp8788_ldo_voltage_fixed_ops,
+		.n_voltages = 1,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
 		.enable_reg = LP8788_EN_LDO_B,
@@ -521,6 +522,7 @@ static struct regulator_desc lp8788_aldo_desc[] = {
 		.name = "aldo2",
 		.id = ALDO2,
 		.ops = &lp8788_ldo_voltage_fixed_ops,
+		.n_voltages = 1,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
 		.enable_reg = LP8788_EN_LDO_B,
@@ -530,6 +532,7 @@ static struct regulator_desc lp8788_aldo_desc[] = {
 		.name = "aldo3",
 		.id = ALDO3,
 		.ops = &lp8788_ldo_voltage_fixed_ops,
+		.n_voltages = 1,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
 		.enable_reg = LP8788_EN_LDO_B,
@@ -539,6 +542,7 @@ static struct regulator_desc lp8788_aldo_desc[] = {
 		.name = "aldo4",
 		.id = ALDO4,
 		.ops = &lp8788_ldo_voltage_fixed_ops,
+		.n_voltages = 1,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
 		.enable_reg = LP8788_EN_LDO_B,
@@ -548,6 +552,7 @@ static struct regulator_desc lp8788_aldo_desc[] = {
 		.name = "aldo5",
 		.id = ALDO5,
 		.ops = &lp8788_ldo_voltage_fixed_ops,
+		.n_voltages = 1,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
 		.enable_reg = LP8788_EN_LDO_C,
@@ -583,6 +588,7 @@ static struct regulator_desc lp8788_aldo_desc[] = {
 		.name = "aldo8",
 		.id = ALDO8,
 		.ops = &lp8788_ldo_voltage_fixed_ops,
+		.n_voltages = 1,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
 		.enable_reg = LP8788_EN_LDO_C,
@@ -592,6 +598,7 @@ static struct regulator_desc lp8788_aldo_desc[] = {
 		.name = "aldo9",
 		.id = ALDO9,
 		.ops = &lp8788_ldo_voltage_fixed_ops,
+		.n_voltages = 1,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
 		.enable_reg = LP8788_EN_LDO_C,
@@ -601,6 +608,7 @@ static struct regulator_desc lp8788_aldo_desc[] = {
 		.name = "aldo10",
 		.id = ALDO10,
 		.ops = &lp8788_ldo_voltage_fixed_ops,
+		.n_voltages = 1,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
 		.enable_reg = LP8788_EN_LDO_C,
-- 
cgit v1.2.3


From c42ea5cdfb14418a9d81e7192d65196b2785c3c2 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Fri, 20 Jul 2012 22:22:20 +0800
Subject: regulator: lp8788-buck: Remove lp8788_set_default_dvs_ctrl_mode
 function

We already know the mask in lp8788_init_dvs() function, and we can update
the corresponding bit for default_dvs_mode in lp8788_init_dvs() function.
This function looks not necessary to me.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Tested-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/lp8788-buck.c | 25 +++----------------------
 1 file changed, 3 insertions(+), 22 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/lp8788-buck.c b/drivers/regulator/lp8788-buck.c
index 6356e821400..0c93a6abe4e 100644
--- a/drivers/regulator/lp8788-buck.c
+++ b/drivers/regulator/lp8788-buck.c
@@ -459,27 +459,6 @@ static struct regulator_desc lp8788_buck_desc[] = {
 	},
 };
 
-static int lp8788_set_default_dvs_ctrl_mode(struct lp8788 *lp,
-					enum lp8788_buck_id id)
-{
-	u8 mask, val;
-
-	switch (id) {
-	case BUCK1:
-		mask = LP8788_BUCK1_DVS_SEL_M;
-		val  = LP8788_BUCK1_DVS_I2C;
-		break;
-	case BUCK2:
-		mask = LP8788_BUCK2_DVS_SEL_M;
-		val  = LP8788_BUCK2_DVS_I2C;
-		break;
-	default:
-		return 0;
-	}
-
-	return lp8788_update_bits(lp, LP8788_BUCK_DVS_SEL, mask, val);
-}
-
 static int _gpio_request(struct lp8788_buck *buck, int gpio, char *name)
 {
 	struct device *dev = buck->lp->dev;
@@ -530,6 +509,7 @@ static int lp8788_init_dvs(struct lp8788_buck *buck, enum lp8788_buck_id id)
 	struct lp8788_platform_data *pdata = buck->lp->pdata;
 	u8 mask[] = { LP8788_BUCK1_DVS_SEL_M, LP8788_BUCK2_DVS_SEL_M };
 	u8 val[]  = { LP8788_BUCK1_DVS_PIN, LP8788_BUCK2_DVS_PIN };
+	u8 default_dvs_mode[] = { LP8788_BUCK1_DVS_I2C, LP8788_BUCK2_DVS_I2C };
 
 	/* no dvs for buck3, 4 */
 	if (id == BUCK3 || id == BUCK4)
@@ -550,7 +530,8 @@ static int lp8788_init_dvs(struct lp8788_buck *buck, enum lp8788_buck_id id)
 				val[id]);
 
 set_default_dvs_mode:
-	return lp8788_set_default_dvs_ctrl_mode(buck->lp, id);
+	return lp8788_update_bits(buck->lp, LP8788_BUCK_DVS_SEL, mask[id],
+				  default_dvs_mode[id]);
 }
 
 static __devinit int lp8788_buck_probe(struct platform_device *pdev)
-- 
cgit v1.2.3


From 0f4c46d2e2150ef68d4c100d74f186ae93f00f3c Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Fri, 20 Jul 2012 23:10:55 +0800
Subject: regulator: Use BUCK_FPWM_[MASK|SHIFT] macros to replace buck_pmap
 table

Below is the buck_pmap mapping table:

BUCK1:  mask = 1 << 0,  shift = 0
BUCK2:  mask = 1 << 1,  shift = 1
BUCK3:  mask = 1 << 2,  shift = 2
BUCK4:  mask = 1 << 3,  shift = 3

The mask and shift can be easily calculated by:
        mask = 1 << BUCK_ID
        shift = BUCK_ID

This patch defines BUCK_FPWM_MASK and BUCK_FPWM_SHIFT macros to replace
buck_pmap mapping table.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Tested-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/lp8788-buck.c | 55 +++++++++--------------------------------
 1 file changed, 12 insertions(+), 43 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/lp8788-buck.c b/drivers/regulator/lp8788-buck.c
index 0c93a6abe4e..ba3e0aa402d 100644
--- a/drivers/regulator/lp8788-buck.c
+++ b/drivers/regulator/lp8788-buck.c
@@ -69,6 +69,9 @@
 #define PIN_HIGH			1
 #define ENABLE_TIME_USEC		32
 
+#define BUCK_FPWM_MASK(x)		(1 << (x))
+#define BUCK_FPWM_SHIFT(x)		(x)
+
 enum lp8788_dvs_state {
 	DVS_LOW  = GPIOF_OUT_INIT_LOW,
 	DVS_HIGH = GPIOF_OUT_INIT_HIGH,
@@ -86,15 +89,9 @@ enum lp8788_buck_id {
 	BUCK4,
 };
 
-struct lp8788_pwm_map {
-	u8 mask;
-	u8 shift;
-};
-
 struct lp8788_buck {
 	struct lp8788 *lp;
 	struct regulator_dev *regulator;
-	struct lp8788_pwm_map *pmap;
 	void *dvs;
 };
 
@@ -106,29 +103,6 @@ static const int lp8788_buck_vtbl[] = {
 	1950000, 2000000,
 };
 
-/* buck pwm mode selection : used for set/get_mode in regulator ops
- * @forced pwm : fast mode
- * @auto pwm   : normal mode
- */
-static struct lp8788_pwm_map buck_pmap[] = {
-	[BUCK1] = {
-		.mask = LP8788_FPWM_BUCK1_M,
-		.shift = LP8788_FPWM_BUCK1_S,
-	},
-	[BUCK2] = {
-		.mask = LP8788_FPWM_BUCK2_M,
-		.shift = LP8788_FPWM_BUCK2_S,
-	},
-	[BUCK3] = {
-		.mask = LP8788_FPWM_BUCK3_M,
-		.shift = LP8788_FPWM_BUCK3_S,
-	},
-	[BUCK4] = {
-		.mask = LP8788_FPWM_BUCK4_M,
-		.shift = LP8788_FPWM_BUCK4_S,
-	},
-};
-
 static const u8 buck1_vout_addr[] = {
 	LP8788_BUCK1_VOUT0, LP8788_BUCK1_VOUT1,
 	LP8788_BUCK1_VOUT2, LP8788_BUCK1_VOUT3,
@@ -347,41 +321,37 @@ static int lp8788_buck_enable_time(struct regulator_dev *rdev)
 static int lp8788_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
 {
 	struct lp8788_buck *buck = rdev_get_drvdata(rdev);
-	struct lp8788_pwm_map *pmap = buck->pmap;
-	u8 val;
-
-	if (!pmap)
-		return -EINVAL;
+	enum lp8788_buck_id id = rdev_get_id(rdev);
+	u8 mask, val;
 
+	mask = BUCK_FPWM_MASK(id);
 	switch (mode) {
 	case REGULATOR_MODE_FAST:
-		val = LP8788_FORCE_PWM << pmap->shift;
+		val = LP8788_FORCE_PWM << BUCK_FPWM_SHIFT(id);
 		break;
 	case REGULATOR_MODE_NORMAL:
-		val = LP8788_AUTO_PWM << pmap->shift;
+		val = LP8788_AUTO_PWM << BUCK_FPWM_SHIFT(id);
 		break;
 	default:
 		return -EINVAL;
 	}
 
-	return lp8788_update_bits(buck->lp, LP8788_BUCK_PWM, pmap->mask, val);
+	return lp8788_update_bits(buck->lp, LP8788_BUCK_PWM, mask, val);
 }
 
 static unsigned int lp8788_buck_get_mode(struct regulator_dev *rdev)
 {
 	struct lp8788_buck *buck = rdev_get_drvdata(rdev);
-	struct lp8788_pwm_map *pmap = buck->pmap;
+	enum lp8788_buck_id id = rdev_get_id(rdev);
 	u8 val;
 	int ret;
 
-	if (!pmap)
-		return -EINVAL;
-
 	ret = lp8788_read_byte(buck->lp, LP8788_BUCK_PWM, &val);
 	if (ret)
 		return ret;
 
-	return val & pmap->mask ? REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
+	return val & BUCK_FPWM_MASK(id) ?
+				REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
 }
 
 static struct regulator_ops lp8788_buck12_ops = {
@@ -548,7 +518,6 @@ static __devinit int lp8788_buck_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	buck->lp = lp;
-	buck->pmap = &buck_pmap[id];
 
 	ret = lp8788_init_dvs(buck, id);
 	if (ret)
-- 
cgit v1.2.3


From 7c7475c009260d02d56f940816bb7c86fce1542e Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Wed, 25 Jul 2012 08:51:44 +0800
Subject: regulator: tps6586x: Convert to
 regulator_[enable|disable|is_enabled|get_voltage_sel]_regmap

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/tps6586x-regulator.c | 76 +++++-----------------------------
 1 file changed, 11 insertions(+), 65 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c
index 19241fc3005..c80f0ac05e2 100644
--- a/drivers/regulator/tps6586x-regulator.c
+++ b/drivers/regulator/tps6586x-regulator.c
@@ -57,9 +57,6 @@
 struct tps6586x_regulator {
 	struct regulator_desc desc;
 
-	int volt_reg;
-	int volt_shift;
-	int volt_nbits;
 	int enable_bit[2];
 	int enable_reg[2];
 
@@ -81,10 +78,10 @@ static int tps6586x_set_voltage_sel(struct regulator_dev *rdev,
 	int ret, val, rid = rdev_get_id(rdev);
 	uint8_t mask;
 
-	val = selector << ri->volt_shift;
-	mask = ((1 << ri->volt_nbits) - 1) << ri->volt_shift;
+	val = selector << (ffs(rdev->desc->vsel_mask) - 1);
+	mask = rdev->desc->vsel_mask;
 
-	ret = tps6586x_update(parent, ri->volt_reg, val, mask);
+	ret = tps6586x_update(parent, rdev->desc->vsel_reg, val, mask);
 	if (ret)
 		return ret;
 
@@ -100,66 +97,14 @@ static int tps6586x_set_voltage_sel(struct regulator_dev *rdev,
 	return ret;
 }
 
-static int tps6586x_get_voltage_sel(struct regulator_dev *rdev)
-{
-	struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
-	struct device *parent = to_tps6586x_dev(rdev);
-	uint8_t val, mask;
-	int ret;
-
-	ret = tps6586x_read(parent, ri->volt_reg, &val);
-	if (ret)
-		return ret;
-
-	mask = ((1 << ri->volt_nbits) - 1) << ri->volt_shift;
-	val = (val & mask) >> ri->volt_shift;
-
-	if (val >= ri->desc.n_voltages)
-		BUG();
-
-	return val;
-}
-
-static int tps6586x_regulator_enable(struct regulator_dev *rdev)
-{
-	struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
-	struct device *parent = to_tps6586x_dev(rdev);
-
-	return tps6586x_set_bits(parent, ri->enable_reg[0],
-				 1 << ri->enable_bit[0]);
-}
-
-static int tps6586x_regulator_disable(struct regulator_dev *rdev)
-{
-	struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
-	struct device *parent = to_tps6586x_dev(rdev);
-
-	return tps6586x_clr_bits(parent, ri->enable_reg[0],
-				 1 << ri->enable_bit[0]);
-}
-
-static int tps6586x_regulator_is_enabled(struct regulator_dev *rdev)
-{
-	struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
-	struct device *parent = to_tps6586x_dev(rdev);
-	uint8_t reg_val;
-	int ret;
-
-	ret = tps6586x_read(parent, ri->enable_reg[0], &reg_val);
-	if (ret)
-		return ret;
-
-	return !!(reg_val & (1 << ri->enable_bit[0]));
-}
-
 static struct regulator_ops tps6586x_regulator_ops = {
 	.list_voltage = regulator_list_voltage_table,
-	.get_voltage_sel = tps6586x_get_voltage_sel,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_sel = tps6586x_set_voltage_sel,
 
-	.is_enabled = tps6586x_regulator_is_enabled,
-	.enable = tps6586x_regulator_enable,
-	.disable = tps6586x_regulator_disable,
+	.is_enabled = regulator_is_enabled_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
 };
 
 static const unsigned int tps6586x_ldo0_voltages[] = {
@@ -202,10 +147,11 @@ static const unsigned int tps6586x_dvm_voltages[] = {
 		.n_voltages = ARRAY_SIZE(tps6586x_##vdata##_voltages),	\
 		.volt_table = tps6586x_##vdata##_voltages,		\
 		.owner	= THIS_MODULE,					\
+		.enable_reg = TPS6586X_SUPPLY##ereg0,			\
+		.enable_mask = 1 << (ebit0),				\
+		.vsel_reg = TPS6586X_##vreg,				\
+		.vsel_mask = ((1 << (nbits)) - 1) << (shift),		\
 	},								\
-	.volt_reg	= TPS6586X_##vreg,				\
-	.volt_shift	= (shift),					\
-	.volt_nbits	= (nbits),					\
 	.enable_reg[0]	= TPS6586X_SUPPLY##ereg0,			\
 	.enable_bit[0]	= (ebit0),					\
 	.enable_reg[1]	= TPS6586X_SUPPLY##ereg1,			\
-- 
cgit v1.2.3


From 363506cd71a5cafeee67b236112f1baf8c30b0ea Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Tue, 31 Jul 2012 21:28:26 +0800
Subject: regulator: wm831x-ldo: Check return value of wm831x_reg_read()

wm831x_reg_read() returns negative error code on failure.
This prevents using the error code as the value read.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/wm831x-ldo.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers')

diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c
index 5cb70ca1e98..56a6de3dd88 100644
--- a/drivers/regulator/wm831x-ldo.c
+++ b/drivers/regulator/wm831x-ldo.c
@@ -205,6 +205,8 @@ static int wm831x_gp_ldo_get_status(struct regulator_dev *rdev)
 
 	/* Is it reporting under voltage? */
 	ret = wm831x_reg_read(wm831x, WM831X_LDO_UV_STATUS);
+	if (ret < 0)
+		return ret;
 	if (ret & mask)
 		return REGULATOR_STATUS_ERROR;
 
@@ -469,6 +471,8 @@ static int wm831x_aldo_get_status(struct regulator_dev *rdev)
 
 	/* Is it reporting under voltage? */
 	ret = wm831x_reg_read(wm831x, WM831X_LDO_UV_STATUS);
+	if (ret < 0)
+		return ret;
 	if (ret & mask)
 		return REGULATOR_STATUS_ERROR;
 
-- 
cgit v1.2.3


From 4001376ef2f6f4ec0f362566d95937434afa07ba Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Wed, 1 Aug 2012 09:15:11 +0800
Subject: regulator: wm8400: Simplify set REGULATOR_MODE_IDLE mode in
 wm8400_dcdc_set_mode

To set REGULATOR_MODE_IDLE mode, what we do is to clear DC1_ACTIVE and
DC1_SLEEP bits, this can be done in one wm8400_set_bits() call.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/wm8400-regulator.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/wm8400-regulator.c b/drivers/regulator/wm8400-regulator.c
index 9035dd05361..27c746ef063 100644
--- a/drivers/regulator/wm8400-regulator.c
+++ b/drivers/regulator/wm8400-regulator.c
@@ -120,13 +120,8 @@ static int wm8400_dcdc_set_mode(struct regulator_dev *dev, unsigned int mode)
 
 	case REGULATOR_MODE_IDLE:
 		/* Datasheet: standby */
-		ret = wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset,
-				      WM8400_DC1_ACTIVE, 0);
-		if (ret != 0)
-			return ret;
 		return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset,
-				       WM8400_DC1_SLEEP, 0);
-
+				       WM8400_DC1_ACTIVE | WM8400_DC1_SLEEP, 0);
 	default:
 		return -EINVAL;
 	}
-- 
cgit v1.2.3


From 7fee2afb5354f4391cbabba5f377c18d1fe50a83 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Tue, 7 Aug 2012 22:21:23 +0800
Subject: regulator: ab8500: Set enable enable_time in regulator_desc

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/ab8500.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 10f2f4d4d19..8807166eab7 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -238,13 +238,6 @@ static int ab8500_regulator_set_voltage_sel(struct regulator_dev *rdev,
 	return ret;
 }
 
-static int ab8500_regulator_enable_time(struct regulator_dev *rdev)
-{
-	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
-
-	return info->delay;
-}
-
 static int ab8500_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
 					     unsigned int old_sel,
 					     unsigned int new_sel)
@@ -261,7 +254,6 @@ static struct regulator_ops ab8500_regulator_ops = {
 	.get_voltage_sel = ab8500_regulator_get_voltage_sel,
 	.set_voltage_sel = ab8500_regulator_set_voltage_sel,
 	.list_voltage	= regulator_list_voltage_table,
-	.enable_time	= ab8500_regulator_enable_time,
 	.set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
 };
 
@@ -276,7 +268,6 @@ static struct regulator_ops ab8500_regulator_fixed_ops = {
 	.is_enabled	= ab8500_regulator_is_enabled,
 	.get_voltage	= ab8500_fixed_get_voltage,
 	.list_voltage	= regulator_list_voltage_linear,
-	.enable_time	= ab8500_regulator_enable_time,
 };
 
 static struct ab8500_regulator_info
@@ -374,6 +365,7 @@ static struct ab8500_regulator_info
 			.owner		= THIS_MODULE,
 			.n_voltages	= 1,
 			.min_uV		= 2000000,
+			.enable_time	= 10000,
 		},
 		.delay			= 10000,
 		.update_bank		= 0x03,
-- 
cgit v1.2.3


From 2c58e2669f197ab0fd5e7552fe82f7bc7d06b15d Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Sun, 5 Aug 2012 10:09:57 +0800
Subject: regulator: max77686: initialize of_node param for regulator register

Initialize config.of_node for regulator before registering.
This is needed for DT based regulator support.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/max77686.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers')

diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c
index c564af6f05a..87544b34628 100644
--- a/drivers/regulator/max77686.c
+++ b/drivers/regulator/max77686.c
@@ -265,6 +265,7 @@ static int max77686_pmic_dt_parse_pdata(struct max77686_dev *iodev,
 		rmatch.of_node = NULL;
 		of_regulator_match(iodev->dev, regulators_np, &rmatch, 1);
 		rdata[i].initdata = rmatch.init_data;
+		rdata[i].of_node = rmatch.of_node;
 	}
 
 	pdata->regulators = rdata;
@@ -325,6 +326,7 @@ static __devinit int max77686_pmic_probe(struct platform_device *pdev)
 
 	for (i = 0; i < MAX77686_REGULATORS; i++) {
 		config.init_data = pdata->regulators[i].initdata;
+		config.of_node = pdata->regulators[i].of_node;
 
 		rdev[i] = regulator_register(&regulators[i], &config);
 		if (IS_ERR(rdev[i])) {
-- 
cgit v1.2.3


From cb44cdeacd693ca964deab9d9f698920bb73529d Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Sun, 5 Aug 2012 10:11:16 +0800
Subject: regulator: max77686: Use array to save pointer to rdev

MAX77686_REGULATORS is known in compile time.
Use array to save pointer to rdev makes the code simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/max77686.c | 28 +++++++++-------------------
 1 file changed, 9 insertions(+), 19 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c
index 87544b34628..2a67d08658a 100644
--- a/drivers/regulator/max77686.c
+++ b/drivers/regulator/max77686.c
@@ -66,7 +66,7 @@ enum max77686_ramp_rate {
 };
 
 struct max77686_data {
-	struct regulator_dev **rdev;
+	struct regulator_dev *rdev[MAX77686_REGULATORS];
 };
 
 static int max77686_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
@@ -284,10 +284,8 @@ static __devinit int max77686_pmic_probe(struct platform_device *pdev)
 {
 	struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
 	struct max77686_platform_data *pdata = dev_get_platdata(iodev->dev);
-	struct regulator_dev **rdev;
 	struct max77686_data *max77686;
-	int i,  size;
-	int ret = 0;
+	int i, ret = 0;
 	struct regulator_config config = { };
 
 	dev_dbg(&pdev->dev, "%s\n", __func__);
@@ -314,12 +312,6 @@ static __devinit int max77686_pmic_probe(struct platform_device *pdev)
 	if (!max77686)
 		return -ENOMEM;
 
-	size = sizeof(struct regulator_dev *) * MAX77686_REGULATORS;
-	max77686->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
-	if (!max77686->rdev)
-		return -ENOMEM;
-
-	rdev = max77686->rdev;
 	config.dev = &pdev->dev;
 	config.regmap = iodev->regmap;
 	platform_set_drvdata(pdev, max77686);
@@ -328,32 +320,30 @@ static __devinit int max77686_pmic_probe(struct platform_device *pdev)
 		config.init_data = pdata->regulators[i].initdata;
 		config.of_node = pdata->regulators[i].of_node;
 
-		rdev[i] = regulator_register(&regulators[i], &config);
-		if (IS_ERR(rdev[i])) {
-			ret = PTR_ERR(rdev[i]);
+		max77686->rdev[i] = regulator_register(&regulators[i], &config);
+		if (IS_ERR(max77686->rdev[i])) {
+			ret = PTR_ERR(max77686->rdev[i]);
 			dev_err(&pdev->dev,
 				"regulator init failed for %d\n", i);
-				rdev[i] = NULL;
-				goto err;
+			max77686->rdev[i] = NULL;
+			goto err;
 		}
 	}
 
 	return 0;
 err:
 	while (--i >= 0)
-		regulator_unregister(rdev[i]);
+		regulator_unregister(max77686->rdev[i]);
 	return ret;
 }
 
 static int __devexit max77686_pmic_remove(struct platform_device *pdev)
 {
 	struct max77686_data *max77686 = platform_get_drvdata(pdev);
-	struct regulator_dev **rdev = max77686->rdev;
 	int i;
 
 	for (i = 0; i < MAX77686_REGULATORS; i++)
-		if (rdev[i])
-			regulator_unregister(rdev[i]);
+		regulator_unregister(max77686->rdev[i]);
 
 	return 0;
 }
-- 
cgit v1.2.3


From 422294deee5fd818527d68951a370a2119876e06 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Wed, 8 Aug 2012 20:20:29 +0800
Subject: regulator: wm831x-dcdc: set_current_limit should select the maximum
 current in specific range

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/wm831x-dcdc.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c
index 7413885be01..90cbcc68370 100644
--- a/drivers/regulator/wm831x-dcdc.c
+++ b/drivers/regulator/wm831x-dcdc.c
@@ -339,16 +339,15 @@ static int wm831x_buckv_set_current_limit(struct regulator_dev *rdev,
 	u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2;
 	int i;
 
-	for (i = 0; i < ARRAY_SIZE(wm831x_dcdc_ilim); i++) {
+	for (i = ARRAY_SIZE(wm831x_dcdc_ilim) - 1; i >= 0; i--) {
 		if ((min_uA <= wm831x_dcdc_ilim[i]) &&
 		    (wm831x_dcdc_ilim[i] <= max_uA))
-			break;
+			return wm831x_set_bits(wm831x, reg,
+					       WM831X_DC1_HC_THR_MASK,
+						i << WM831X_DC1_HC_THR_SHIFT);
 	}
-	if (i == ARRAY_SIZE(wm831x_dcdc_ilim))
-		return -EINVAL;
 
-	return wm831x_set_bits(wm831x, reg, WM831X_DC1_HC_THR_MASK,
-			       i << WM831X_DC1_HC_THR_SHIFT);
+	return -EINVAL;
 }
 
 static int wm831x_buckv_get_current_limit(struct regulator_dev *rdev)
-- 
cgit v1.2.3


From 73f4f3d37604ff7084e6157745610c8fb07d27b6 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Wed, 8 Aug 2012 20:21:30 +0800
Subject: regulator: tps6524x: set_current_limit should select the maximum
 current in specific range

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/tps6524x-regulator.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/tps6524x-regulator.c b/drivers/regulator/tps6524x-regulator.c
index 947ece933d9..058d2f2675e 100644
--- a/drivers/regulator/tps6524x-regulator.c
+++ b/drivers/regulator/tps6524x-regulator.c
@@ -502,15 +502,13 @@ static int set_current_limit(struct regulator_dev *rdev, int min_uA,
 	if (info->n_ilimsels == 1)
 		return -EINVAL;
 
-	for (i = 0; i < info->n_ilimsels; i++)
+	for (i = info->n_ilimsels - 1; i >= 0; i--) {
 		if (min_uA <= info->ilimsels[i] &&
 		    max_uA >= info->ilimsels[i])
-			break;
-
-	if (i >= info->n_ilimsels)
-		return -EINVAL;
+			return write_field(hw, &info->ilimsel, i);
+	}
 
-	return write_field(hw, &info->ilimsel, i);
+	return -EINVAL;
 }
 
 static int get_current_limit(struct regulator_dev *rdev)
-- 
cgit v1.2.3


From 4e1d67eddf70f815b77af5354aaa5e60084fde8b Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Wed, 8 Aug 2012 20:22:35 +0800
Subject: regulator: lp872x: set_current_limit should select the maximum
 current in specific range

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/lp872x.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c
index 212c38eaba7..6199d0f6cca 100644
--- a/drivers/regulator/lp872x.c
+++ b/drivers/regulator/lp872x.c
@@ -374,8 +374,8 @@ static int lp8725_buck_set_current_limit(struct regulator_dev *rdev,
 {
 	struct lp872x *lp = rdev_get_drvdata(rdev);
 	enum lp872x_regulator_id buck = rdev_get_id(rdev);
-	int i, max = ARRAY_SIZE(lp8725_buck_uA);
-	u8 addr, val;
+	int i;
+	u8 addr;
 
 	switch (buck) {
 	case LP8725_ID_BUCK1:
@@ -388,17 +388,15 @@ static int lp8725_buck_set_current_limit(struct regulator_dev *rdev,
 		return -EINVAL;
 	}
 
-	for (i = 0 ; i < max ; i++)
+	for (i = ARRAY_SIZE(lp8725_buck_uA) - 1 ; i >= 0; i--) {
 		if (lp8725_buck_uA[i] >= min_uA &&
 			lp8725_buck_uA[i] <= max_uA)
-			break;
-
-	if (i == max)
-		return -EINVAL;
-
-	val = i << LP8725_BUCK_CL_S;
+			return lp872x_update_bits(lp, addr,
+						  LP8725_BUCK_CL_M,
+						  i << LP8725_BUCK_CL_S);
+	}
 
-	return lp872x_update_bits(lp, addr, LP8725_BUCK_CL_M, val);
+	return -EINVAL;
 }
 
 static int lp8725_buck_get_current_limit(struct regulator_dev *rdev)
-- 
cgit v1.2.3


From 19d23c21a64d1312be48def8ac49180bd60fc76d Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Wed, 8 Aug 2012 20:23:54 +0800
Subject: regulator: da9052: set_current_limit should select the maximum
 current in specific range

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/da9052-regulator.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c
index 903299cf15c..27355b1199e 100644
--- a/drivers/regulator/da9052-regulator.c
+++ b/drivers/regulator/da9052-regulator.c
@@ -133,8 +133,8 @@ static int da9052_dcdc_set_current_limit(struct regulator_dev *rdev, int min_uA,
 	    max_uA < da9052_current_limits[row][DA9052_MIN_UA])
 		return -EINVAL;
 
-	for (i = 0; i < DA9052_CURRENT_RANGE; i++) {
-		if (min_uA <= da9052_current_limits[row][i]) {
+	for (i = DA9052_CURRENT_RANGE - 1; i >= 0; i--) {
+		if (da9052_current_limits[row][i] <= max_uA) {
 			reg_val = i;
 			break;
 		}
-- 
cgit v1.2.3


From b571dc38d447fb34db39496b8a236946ff9baf34 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Fri, 10 Aug 2012 09:38:39 +0800
Subject: regulator: mc13xxx: Remove get_voltage implementation for single
 voltage regulators

This is not required after commit f7df20ec
"regulator: core: Use list_voltage() to read single voltage regulators"

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/mc13783-regulator.c      |  1 -
 drivers/regulator/mc13892-regulator.c      |  1 -
 drivers/regulator/mc13xxx-regulator-core.c | 11 -----------
 drivers/regulator/mc13xxx.h                |  1 -
 4 files changed, 14 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/mc13783-regulator.c b/drivers/regulator/mc13783-regulator.c
index 2587ea1f743..4977b199c86 100644
--- a/drivers/regulator/mc13783-regulator.c
+++ b/drivers/regulator/mc13783-regulator.c
@@ -324,7 +324,6 @@ static struct regulator_ops mc13783_gpo_regulator_ops = {
 	.is_enabled = mc13783_gpo_regulator_is_enabled,
 	.list_voltage = regulator_list_voltage_table,
 	.set_voltage = mc13xxx_fixed_regulator_set_voltage,
-	.get_voltage = mc13xxx_fixed_regulator_get_voltage,
 };
 
 static int __devinit mc13783_regulator_probe(struct platform_device *pdev)
diff --git a/drivers/regulator/mc13892-regulator.c b/drivers/regulator/mc13892-regulator.c
index 09265f02ed3..1fa63812f7a 100644
--- a/drivers/regulator/mc13892-regulator.c
+++ b/drivers/regulator/mc13892-regulator.c
@@ -390,7 +390,6 @@ static struct regulator_ops mc13892_gpo_regulator_ops = {
 	.is_enabled = mc13892_gpo_regulator_is_enabled,
 	.list_voltage = regulator_list_voltage_table,
 	.set_voltage = mc13xxx_fixed_regulator_set_voltage,
-	.get_voltage = mc13xxx_fixed_regulator_get_voltage,
 };
 
 static int mc13892_sw_regulator_get_voltage_sel(struct regulator_dev *rdev)
diff --git a/drivers/regulator/mc13xxx-regulator-core.c b/drivers/regulator/mc13xxx-regulator-core.c
index 8151889745e..88cbb832d55 100644
--- a/drivers/regulator/mc13xxx-regulator-core.c
+++ b/drivers/regulator/mc13xxx-regulator-core.c
@@ -152,23 +152,12 @@ int mc13xxx_fixed_regulator_set_voltage(struct regulator_dev *rdev, int min_uV,
 }
 EXPORT_SYMBOL_GPL(mc13xxx_fixed_regulator_set_voltage);
 
-int mc13xxx_fixed_regulator_get_voltage(struct regulator_dev *rdev)
-{
-	int id = rdev_get_id(rdev);
-
-	dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id);
-
-	return rdev->desc->volt_table[0];
-}
-EXPORT_SYMBOL_GPL(mc13xxx_fixed_regulator_get_voltage);
-
 struct regulator_ops mc13xxx_fixed_regulator_ops = {
 	.enable = mc13xxx_regulator_enable,
 	.disable = mc13xxx_regulator_disable,
 	.is_enabled = mc13xxx_regulator_is_enabled,
 	.list_voltage = regulator_list_voltage_table,
 	.set_voltage = mc13xxx_fixed_regulator_set_voltage,
-	.get_voltage = mc13xxx_fixed_regulator_get_voltage,
 };
 EXPORT_SYMBOL_GPL(mc13xxx_fixed_regulator_ops);
 
diff --git a/drivers/regulator/mc13xxx.h b/drivers/regulator/mc13xxx.h
index eaff5510b6d..06c8903f182 100644
--- a/drivers/regulator/mc13xxx.h
+++ b/drivers/regulator/mc13xxx.h
@@ -34,7 +34,6 @@ struct mc13xxx_regulator_priv {
 
 extern int mc13xxx_fixed_regulator_set_voltage(struct regulator_dev *rdev,
 		int min_uV, int max_uV, unsigned *selector);
-extern int mc13xxx_fixed_regulator_get_voltage(struct regulator_dev *rdev);
 
 #ifdef CONFIG_OF
 extern int mc13xxx_get_num_regulators_dt(struct platform_device *pdev);
-- 
cgit v1.2.3


From 88348effd60329836f96b672c69db60271aca60a Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Fri, 10 Aug 2012 09:33:44 +0800
Subject: regulator: ab3100: Remove get_voltage implementation for
 regulator_ops_fixed

This is not required after commit f7df20ec
"regulator: core: Use list_voltage() to read single voltage regulators"

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/ab3100.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c
index c151fd5d8c9..65ad2b36ce3 100644
--- a/drivers/regulator/ab3100.c
+++ b/drivers/regulator/ab3100.c
@@ -347,17 +347,11 @@ static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg)
 	return abreg->plfdata->external_voltage;
 }
 
-static int ab3100_get_fixed_voltage_regulator(struct regulator_dev *reg)
-{
-	return reg->desc->min_uV;
-}
-
 static struct regulator_ops regulator_ops_fixed = {
 	.list_voltage = regulator_list_voltage_linear,
 	.enable      = ab3100_enable_regulator,
 	.disable     = ab3100_disable_regulator,
 	.is_enabled  = ab3100_is_enabled_regulator,
-	.get_voltage = ab3100_get_fixed_voltage_regulator,
 };
 
 static struct regulator_ops regulator_ops_variable = {
-- 
cgit v1.2.3


From 0d3fb582dc6787967b13360d13d5c6136f301137 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Fri, 10 Aug 2012 09:34:53 +0800
Subject: regulator: ab8500: Remove get_voltage implementation for
 ab8500_regulator_fixed_ops

This is not required after commit f7df20ec
"regulator: core: Use list_voltage() to read single voltage regulators"

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/ab8500.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 8807166eab7..c884a5c4b47 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -257,16 +257,10 @@ static struct regulator_ops ab8500_regulator_ops = {
 	.set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
 };
 
-static int ab8500_fixed_get_voltage(struct regulator_dev *rdev)
-{
-	return rdev->desc->min_uV;
-}
-
 static struct regulator_ops ab8500_regulator_fixed_ops = {
 	.enable		= ab8500_regulator_enable,
 	.disable	= ab8500_regulator_disable,
 	.is_enabled	= ab8500_regulator_is_enabled,
-	.get_voltage	= ab8500_fixed_get_voltage,
 	.list_voltage	= regulator_list_voltage_linear,
 };
 
-- 
cgit v1.2.3


From 9c7fde4e80072fb5db4f60f1b16b8178198ba4ea Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Fri, 10 Aug 2012 09:35:59 +0800
Subject: regulator: isl6271a: Remove get_voltage implementation for
 isl_fixed_ops

This is not required after commit f7df20ec
"regulator: core: Use list_voltage() to read single voltage regulators"

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/isl6271a-regulator.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/isl6271a-regulator.c b/drivers/regulator/isl6271a-regulator.c
index 1d145a07ada..d8ecf49a577 100644
--- a/drivers/regulator/isl6271a-regulator.c
+++ b/drivers/regulator/isl6271a-regulator.c
@@ -73,13 +73,7 @@ static struct regulator_ops isl_core_ops = {
 	.map_voltage	= regulator_map_voltage_linear,
 };
 
-static int isl6271a_get_fixed_voltage(struct regulator_dev *dev)
-{
-	return dev->desc->min_uV;
-}
-
 static struct regulator_ops isl_fixed_ops = {
-	.get_voltage	= isl6271a_get_fixed_voltage,
 	.list_voltage	= regulator_list_voltage_linear,
 };
 
-- 
cgit v1.2.3


From f9cfbde723ba89b7bf7d1ec0b8adeea0c3c4a091 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Fri, 10 Aug 2012 09:37:09 +0800
Subject: regulator: twl: Remove get_voltage implementation for single voltage
 regulators

This is not required after commit f7df20ec
"regulator: core: Use list_voltage() to read single voltage regulators"

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/twl-regulator.c | 11 -----------
 1 file changed, 11 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index 89d447dd583..5ce84108744 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -624,18 +624,9 @@ static int twlfixed_list_voltage(struct regulator_dev *rdev, unsigned index)
 	return info->min_mV * 1000;
 }
 
-static int twlfixed_get_voltage(struct regulator_dev *rdev)
-{
-	struct twlreg_info	*info = rdev_get_drvdata(rdev);
-
-	return info->min_mV * 1000;
-}
-
 static struct regulator_ops twl4030fixed_ops = {
 	.list_voltage	= twlfixed_list_voltage,
 
-	.get_voltage	= twlfixed_get_voltage,
-
 	.enable		= twl4030reg_enable,
 	.disable	= twl4030reg_disable,
 	.is_enabled	= twl4030reg_is_enabled,
@@ -648,8 +639,6 @@ static struct regulator_ops twl4030fixed_ops = {
 static struct regulator_ops twl6030fixed_ops = {
 	.list_voltage	= twlfixed_list_voltage,
 
-	.get_voltage	= twlfixed_get_voltage,
-
 	.enable		= twl6030reg_enable,
 	.disable	= twl6030reg_disable,
 	.is_enabled	= twl6030reg_is_enabled,
-- 
cgit v1.2.3


From 0ffff5a60fdd7455c83855ee788a8aae9a79aab4 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Tue, 14 Aug 2012 12:41:50 +0000
Subject: regulator: twl: make twl_info tables const

I currently carry the series to make of_device_id->data const in the
arm-soc tree, which fixes a number of issues, but leaves one new
compiler warning about the twl-regulator driver:

drivers/regulator/twl-regulator.c: In function 'twlreg_probe':
drivers/regulator/twl-regulator.c:1130:8: warning: assignment discards 'const'
qualifier from pointer target type [enabled by default]
drivers/regulator/twl-regulator.c:1139:9: warning: assignment discards 'const'
qualifier from pointer target type [enabled by default]

The warning indicates that the driver takes a static table with
initialization data for each regulator, modifies the data in place
and passes a pointer to that structure to the regulator_register
function. This is probably ok because a system contains only one
instance of each regulator, but it's still bad style because any
driver should be written to support multiple instances of the same
hardware.

This patch changes the code to dynamically allocate the memory
we pass to the regulator core so the table can be constant.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/twl-regulator.c | 38 ++++++++++++++++++++++++--------------
 1 file changed, 24 insertions(+), 14 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index 5ce84108744..a8365229ea6 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -863,7 +863,7 @@ static struct regulator_ops twlsmps_ops = {
 			0x0, TWL6030, twl6030fixed_ops)
 
 #define TWL4030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf) \
-static struct twlreg_info TWL4030_INFO_##label = { \
+static const struct twlreg_info TWL4030_INFO_##label = { \
 	.base = offset, \
 	.id = num, \
 	.table_len = ARRAY_SIZE(label##_VSEL_table), \
@@ -881,7 +881,7 @@ static struct twlreg_info TWL4030_INFO_##label = { \
 	}
 
 #define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf) \
-static struct twlreg_info TWL4030_INFO_##label = { \
+static const struct twlreg_info TWL4030_INFO_##label = { \
 	.base = offset, \
 	.id = num, \
 	.remap = remap_conf, \
@@ -896,7 +896,7 @@ static struct twlreg_info TWL4030_INFO_##label = { \
 	}
 
 #define TWL6030_ADJUSTABLE_SMPS(label) \
-static struct twlreg_info TWL6030_INFO_##label = { \
+static const struct twlreg_info TWL6030_INFO_##label = { \
 	.desc = { \
 		.name = #label, \
 		.id = TWL6030_REG_##label, \
@@ -907,7 +907,7 @@ static struct twlreg_info TWL6030_INFO_##label = { \
 	}
 
 #define TWL6030_ADJUSTABLE_LDO(label, offset, min_mVolts, max_mVolts) \
-static struct twlreg_info TWL6030_INFO_##label = { \
+static const struct twlreg_info TWL6030_INFO_##label = { \
 	.base = offset, \
 	.min_mV = min_mVolts, \
 	.max_mV = max_mVolts, \
@@ -922,7 +922,7 @@ static struct twlreg_info TWL6030_INFO_##label = { \
 	}
 
 #define TWL6025_ADJUSTABLE_LDO(label, offset, min_mVolts, max_mVolts) \
-static struct twlreg_info TWL6025_INFO_##label = { \
+static const struct twlreg_info TWL6025_INFO_##label = { \
 	.base = offset, \
 	.min_mV = min_mVolts, \
 	.max_mV = max_mVolts, \
@@ -938,7 +938,7 @@ static struct twlreg_info TWL6025_INFO_##label = { \
 
 #define TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, remap_conf, \
 		family, operations) \
-static struct twlreg_info TWLFIXED_INFO_##label = { \
+static const struct twlreg_info TWLFIXED_INFO_##label = { \
 	.base = offset, \
 	.id = num, \
 	.min_mV = mVolts, \
@@ -968,7 +968,7 @@ static struct twlreg_info TWLRES_INFO_##label = { \
 	}
 
 #define TWL6025_ADJUSTABLE_SMPS(label, offset) \
-static struct twlreg_info TWLSMPS_INFO_##label = { \
+static const struct twlreg_info TWLSMPS_INFO_##label = { \
 	.base = offset, \
 	.min_mV = 600, \
 	.max_mV = 2100, \
@@ -1125,6 +1125,7 @@ static int __devinit twlreg_probe(struct platform_device *pdev)
 {
 	int				i, id;
 	struct twlreg_info		*info;
+	const struct twlreg_info	*template;
 	struct regulator_init_data	*initdata;
 	struct regulation_constraints	*c;
 	struct regulator_dev		*rdev;
@@ -1134,17 +1135,17 @@ static int __devinit twlreg_probe(struct platform_device *pdev)
 
 	match = of_match_device(twl_of_match, &pdev->dev);
 	if (match) {
-		info = match->data;
-		id = info->desc.id;
+		template = match->data;
+		id = template->desc.id;
 		initdata = of_get_regulator_init_data(&pdev->dev,
 						      pdev->dev.of_node);
 		drvdata = NULL;
 	} else {
 		id = pdev->id;
 		initdata = pdev->dev.platform_data;
-		for (i = 0, info = NULL; i < ARRAY_SIZE(twl_of_match); i++) {
-			info = twl_of_match[i].data;
-			if (info && info->desc.id == id)
+		for (i = 0, template = NULL; i < ARRAY_SIZE(twl_of_match); i++) {
+			template = twl_of_match[i].data;
+			if (template && template->desc.id == id)
 				break;
 		}
 		if (i == ARRAY_SIZE(twl_of_match))
@@ -1155,12 +1156,16 @@ static int __devinit twlreg_probe(struct platform_device *pdev)
 			return -EINVAL;
 	}
 
-	if (!info)
+	if (!template)
 		return -ENODEV;
 
 	if (!initdata)
 		return -EINVAL;
 
+	info = kmemdup(template, sizeof (*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
 	if (drvdata) {
 		/* copy the driver data into regulator data */
 		info->features = drvdata->features;
@@ -1221,6 +1226,7 @@ static int __devinit twlreg_probe(struct platform_device *pdev)
 	if (IS_ERR(rdev)) {
 		dev_err(&pdev->dev, "can't register %s, %ld\n",
 				info->desc.name, PTR_ERR(rdev));
+		kfree(info);
 		return PTR_ERR(rdev);
 	}
 	platform_set_drvdata(pdev, rdev);
@@ -1242,7 +1248,11 @@ static int __devinit twlreg_probe(struct platform_device *pdev)
 
 static int __devexit twlreg_remove(struct platform_device *pdev)
 {
-	regulator_unregister(platform_get_drvdata(pdev));
+	struct regulator_dev *rdev = platform_get_drvdata(pdev);
+	struct twlreg_info *info = rdev->reg_data;
+
+	regulator_unregister(rdev);
+	kfree(info);
 	return 0;
 }
 
-- 
cgit v1.2.3


From ffee19091a4e0c5dae0e83a6e0927c0f5c554537 Mon Sep 17 00:00:00 2001
From: Gyungoh Yoo <jack.yoo@maxim-ic.com>
Date: Thu, 9 Aug 2012 14:24:34 -0600
Subject: regulator: add MAX8907 driver

The MAX8907 is an I2C-based power-management IC containing voltage
regulators, a reset controller, a real-time clock, and a touch-screen
controller.

The original driver was written by:
* Gyungoh Yoo <jack.yoo@maxim-ic.com>

Various fixes and enhancements by:
* Jin Park <jinyoungp@nvidia.com>
* Tom Cherry <tcherry@nvidia.com>
* Prashant Gaikwad <pgaikwad@nvidia.com>
* Dan Willemsen <dwillemsen@nvidia.com>
* Laxman Dewangan <ldewangan@nvidia.com>

During upstreaming, I (swarren):
* Converted to regmap.
* Allowed probing from device tree.
* Reworked the regulator driver to be represented as a single device that
  provides multiple regulators, rather than as a device per regulator.
* Replaced many regulator ops with standard functions.
* Added ability to specify supplies for each regulator.
* Removed the WLED regulator. If/when we expose this in the driver, it
  should be a backlight object not a regulator object.
* Renamed from max8907c->max8907, since the driver covers at least the
  C and B revisions.
* General cleanup.

Signed-off-by: Gyungoh Yoo <jack.yoo@maxim-ic.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/Kconfig             |   8 +
 drivers/regulator/Makefile            |   1 +
 drivers/regulator/max8907-regulator.c | 383 ++++++++++++++++++++++++++++++++++
 3 files changed, 392 insertions(+)
 create mode 100644 drivers/regulator/max8907-regulator.c

(limited to 'drivers')

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 4e932cc695e..1c6320c131f 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -172,6 +172,14 @@ config REGULATOR_MAX8660
 	  This driver controls a Maxim 8660/8661 voltage output
 	  regulator via I2C bus.
 
+config REGULATOR_MAX8907
+	tristate "Maxim 8907 voltage regulator"
+	depends on MFD_MAX8907
+	help
+	  This driver controls a Maxim 8907 voltage output regulator
+	  via I2C bus. The provided regulator is suitable for Tegra
+	  chip to control Step-Down DC-DC and LDOs.
+
 config REGULATOR_MAX8925
 	tristate "Maxim MAX8925 Power Management IC"
 	depends on MFD_MAX8925
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 3342615cf25..3a0dbc5de66 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o
 obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
 obj-$(CONFIG_REGULATOR_MAX8649)	+= max8649.o
 obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
+obj-$(CONFIG_REGULATOR_MAX8907) += max8907-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o
 obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o
diff --git a/drivers/regulator/max8907-regulator.c b/drivers/regulator/max8907-regulator.c
new file mode 100644
index 00000000000..bd3b28b5523
--- /dev/null
+++ b/drivers/regulator/max8907-regulator.c
@@ -0,0 +1,383 @@
+/*
+ * max8907-regulator.c -- support regulators in max8907
+ *
+ * Copyright (C) 2010 Gyungoh Yoo <jack.yoo@maxim-ic.com>
+ * Copyright (C) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Portions based on drivers/regulator/tps65910-regulator.c,
+ *     Copyright 2010 Texas Instruments Inc.
+ *     Author: Graeme Gregory <gg@slimlogic.co.uk>
+ *     Author: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max8907.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define MAX8907_II2RR_VERSION_MASK	0xF0
+#define MAX8907_II2RR_VERSION_REV_A	0x00
+#define MAX8907_II2RR_VERSION_REV_B	0x10
+#define MAX8907_II2RR_VERSION_REV_C	0x30
+
+struct max8907_regulator {
+	struct regulator_desc desc[MAX8907_NUM_REGULATORS];
+	struct regulator_dev *rdev[MAX8907_NUM_REGULATORS];
+};
+
+#define REG_MBATT() \
+	[MAX8907_MBATT] = { \
+		.name = "MBATT", \
+		.supply_name = "mbatt", \
+		.id = MAX8907_MBATT, \
+		.ops = &max8907_mbatt_ops, \
+		.type = REGULATOR_VOLTAGE, \
+		.owner = THIS_MODULE, \
+	}
+
+#define REG_LDO(ids, supply, base, min, max, step) \
+	[MAX8907_##ids] = { \
+		.name = #ids, \
+		.supply_name = supply, \
+		.id = MAX8907_##ids, \
+		.n_voltages = ((max) - (min)) / (step) + 1, \
+		.ops = &max8907_ldo_ops, \
+		.type = REGULATOR_VOLTAGE, \
+		.owner = THIS_MODULE, \
+		.min_uV = (min), \
+		.uV_step = (step), \
+		.vsel_reg = (base) + MAX8907_VOUT, \
+		.vsel_mask = 0x3f, \
+		.enable_reg = (base) + MAX8907_CTL, \
+		.enable_mask = MAX8907_MASK_LDO_EN, \
+	}
+
+#define REG_FIXED(ids, supply, voltage) \
+	[MAX8907_##ids] = { \
+		.name = #ids, \
+		.supply_name = supply, \
+		.id = MAX8907_##ids, \
+		.n_voltages = 1, \
+		.ops = &max8907_fixed_ops, \
+		.type = REGULATOR_VOLTAGE, \
+		.owner = THIS_MODULE, \
+		.min_uV = (voltage), \
+	}
+
+#define REG_OUT5V(ids, supply, base, voltage) \
+	[MAX8907_##ids] = { \
+		.name = #ids, \
+		.supply_name = supply, \
+		.id = MAX8907_##ids, \
+		.n_voltages = 1, \
+		.ops = &max8907_out5v_ops, \
+		.type = REGULATOR_VOLTAGE, \
+		.owner = THIS_MODULE, \
+		.min_uV = (voltage), \
+		.enable_reg = (base), \
+		.enable_mask = MAX8907_MASK_OUT5V_EN, \
+	}
+
+#define REG_BBAT(ids, supply, base, min, max, step) \
+	[MAX8907_##ids] = { \
+		.name = #ids, \
+		.supply_name = supply, \
+		.id = MAX8907_##ids, \
+		.n_voltages = ((max) - (min)) / (step) + 1, \
+		.ops = &max8907_bbat_ops, \
+		.type = REGULATOR_VOLTAGE, \
+		.owner = THIS_MODULE, \
+		.min_uV = (min), \
+		.uV_step = (step), \
+		.vsel_reg = (base), \
+		.vsel_mask = MAX8907_MASK_VBBATTCV, \
+	}
+
+#define LDO_750_50(id, supply, base) REG_LDO(id, supply, (base), \
+			750000, 3900000, 50000)
+#define LDO_650_25(id, supply, base) REG_LDO(id, supply, (base), \
+			650000, 2225000, 25000)
+
+static struct regulator_ops max8907_mbatt_ops = {
+};
+
+static struct regulator_ops max8907_ldo_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+static struct regulator_ops max8907_ldo_hwctl_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static struct regulator_ops max8907_fixed_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+};
+
+static struct regulator_ops max8907_out5v_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+static struct regulator_ops max8907_out5v_hwctl_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+};
+
+static struct regulator_ops max8907_bbat_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static struct regulator_desc max8907_regulators[] = {
+	REG_MBATT(),
+	REG_LDO(SD1, "in-v1", MAX8907_REG_SDCTL1, 650000, 2225000, 25000),
+	REG_LDO(SD2, "in-v2", MAX8907_REG_SDCTL2, 637500, 1425000, 12500),
+	REG_LDO(SD3, "in-v3", MAX8907_REG_SDCTL3, 750000, 3900000, 50000),
+	LDO_750_50(LDO1, "in1", MAX8907_REG_LDOCTL1),
+	LDO_650_25(LDO2, "in2", MAX8907_REG_LDOCTL2),
+	LDO_650_25(LDO3, "in3", MAX8907_REG_LDOCTL3),
+	LDO_750_50(LDO4, "in4", MAX8907_REG_LDOCTL4),
+	LDO_750_50(LDO5, "in5", MAX8907_REG_LDOCTL5),
+	LDO_750_50(LDO6, "in6", MAX8907_REG_LDOCTL6),
+	LDO_750_50(LDO7, "in7", MAX8907_REG_LDOCTL7),
+	LDO_750_50(LDO8, "in8", MAX8907_REG_LDOCTL8),
+	LDO_750_50(LDO9, "in9", MAX8907_REG_LDOCTL9),
+	LDO_750_50(LDO10, "in10", MAX8907_REG_LDOCTL10),
+	LDO_750_50(LDO11, "in11", MAX8907_REG_LDOCTL11),
+	LDO_750_50(LDO12, "in12", MAX8907_REG_LDOCTL12),
+	LDO_750_50(LDO13, "in13", MAX8907_REG_LDOCTL13),
+	LDO_750_50(LDO14, "in14", MAX8907_REG_LDOCTL14),
+	LDO_750_50(LDO15, "in15", MAX8907_REG_LDOCTL15),
+	LDO_750_50(LDO16, "in16", MAX8907_REG_LDOCTL16),
+	LDO_650_25(LDO17, "in17", MAX8907_REG_LDOCTL17),
+	LDO_650_25(LDO18, "in18", MAX8907_REG_LDOCTL18),
+	LDO_750_50(LDO19, "in19", MAX8907_REG_LDOCTL19),
+	LDO_750_50(LDO20, "in20", MAX8907_REG_LDOCTL20),
+	REG_OUT5V(OUT5V, "mbatt", MAX8907_REG_OUT5VEN, 5000000),
+	REG_OUT5V(OUT33V, "mbatt",  MAX8907_REG_OUT33VEN, 3300000),
+	REG_BBAT(BBAT, "MBATT", MAX8907_REG_BBAT_CNFG,
+						2400000, 3000000, 200000),
+	REG_FIXED(SDBY, "MBATT", 1200000),
+	REG_FIXED(VRTC, "MBATT", 3300000),
+};
+
+#ifdef CONFIG_OF
+
+#define MATCH(_name, _id) \
+	[MAX8907_##_id] = { \
+		.name = #_name, \
+		.driver_data = (void *)&max8907_regulators[MAX8907_##_id], \
+	}
+
+static struct of_regulator_match max8907_matches[] = {
+	MATCH(mbatt, MBATT),
+	MATCH(sd1, SD1),
+	MATCH(sd2, SD2),
+	MATCH(sd3, SD3),
+	MATCH(ldo1, LDO1),
+	MATCH(ldo2, LDO2),
+	MATCH(ldo3, LDO3),
+	MATCH(ldo4, LDO4),
+	MATCH(ldo5, LDO5),
+	MATCH(ldo6, LDO6),
+	MATCH(ldo7, LDO7),
+	MATCH(ldo8, LDO8),
+	MATCH(ldo9, LDO9),
+	MATCH(ldo10, LDO10),
+	MATCH(ldo11, LDO11),
+	MATCH(ldo12, LDO12),
+	MATCH(ldo13, LDO13),
+	MATCH(ldo14, LDO14),
+	MATCH(ldo15, LDO15),
+	MATCH(ldo16, LDO16),
+	MATCH(ldo17, LDO17),
+	MATCH(ldo18, LDO18),
+	MATCH(ldo19, LDO19),
+	MATCH(ldo20, LDO20),
+	MATCH(out5v, OUT5V),
+	MATCH(out33v, OUT33V),
+	MATCH(bbat, BBAT),
+	MATCH(sdby, SDBY),
+	MATCH(vrtc, VRTC),
+};
+
+static int max8907_regulator_parse_dt(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.parent->of_node;
+	struct device_node *regulators;
+	int ret;
+
+	if (!pdev->dev.parent->of_node)
+		return 0;
+
+	regulators = of_find_node_by_name(np, "regulators");
+	if (!regulators) {
+		dev_err(&pdev->dev, "regulators node not found\n");
+		return -EINVAL;
+	}
+
+	ret = of_regulator_match(pdev->dev.parent, regulators,
+				 max8907_matches,
+				 ARRAY_SIZE(max8907_matches));
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Error parsing regulator init data: %d\n",
+			ret);
+		return ret;
+	}
+
+	return 0;
+}
+#else
+static int max8907_regulator_parse_dt(struct platform_device *pdev)
+{
+	return 0;
+}
+#endif
+
+static __devinit int max8907_regulator_probe(struct platform_device *pdev)
+{
+	struct max8907 *max8907 = dev_get_drvdata(pdev->dev.parent);
+	struct max8907_platform_data *pdata = dev_get_platdata(max8907->dev);
+	int ret;
+	struct max8907_regulator *pmic;
+	unsigned int val;
+	int i;
+	struct regulator_config config = {};
+	struct regulator_init_data *idata;
+	const char *mbatt_rail_name = NULL;
+
+	ret = max8907_regulator_parse_dt(pdev);
+	if (ret)
+		return ret;
+
+	pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
+	if (!pmic) {
+		dev_err(&pdev->dev, "Failed to alloc pmic\n");
+		return -ENOMEM;
+	}
+	platform_set_drvdata(pdev, pmic);
+
+	memcpy(pmic->desc, max8907_regulators, sizeof(pmic->desc));
+
+	/* Backwards compatibility with MAX8907B; SD1 uses different voltages */
+	regmap_read(max8907->regmap_gen, MAX8907_REG_II2RR, &val);
+	if ((val & MAX8907_II2RR_VERSION_MASK) ==
+	    MAX8907_II2RR_VERSION_REV_B) {
+		pmic->desc[MAX8907_SD1].min_uV = 637500;
+		pmic->desc[MAX8907_SD1].uV_step = 12500;
+		pmic->desc[MAX8907_SD1].n_voltages = (1425000 - 637500) / 12500;
+	}
+
+	for (i = 0; i < MAX8907_NUM_REGULATORS; i++) {
+		config.dev = pdev->dev.parent;
+		if (pdata)
+			idata = pdata->init_data[i];
+		else
+			idata = max8907_matches[i].init_data;
+		config.init_data = idata;
+		config.driver_data = pmic;
+		config.regmap = max8907->regmap_gen;
+		config.of_node = max8907_matches[i].of_node;
+
+		switch (pmic->desc[i].id) {
+		case MAX8907_MBATT:
+			mbatt_rail_name = idata->constraints.name;
+			break;
+		case MAX8907_BBAT:
+		case MAX8907_SDBY:
+		case MAX8907_VRTC:
+			idata->supply_regulator = mbatt_rail_name;
+			break;
+		}
+
+		if (pmic->desc[i].ops == &max8907_ldo_ops) {
+			regmap_read(config.regmap, pmic->desc[i].enable_reg,
+				    &val);
+			if ((val & MAX8907_MASK_LDO_SEQ) !=
+			    MAX8907_MASK_LDO_SEQ)
+				pmic->desc[i].ops = &max8907_ldo_hwctl_ops;
+		} else if (pmic->desc[i].ops == &max8907_out5v_ops) {
+			regmap_read(config.regmap, pmic->desc[i].enable_reg,
+				    &val);
+			if ((val & (MAX8907_MASK_OUT5V_VINEN |
+						MAX8907_MASK_OUT5V_ENSRC)) !=
+			    MAX8907_MASK_OUT5V_ENSRC)
+				pmic->desc[i].ops = &max8907_out5v_hwctl_ops;
+		}
+
+		pmic->rdev[i] = regulator_register(&pmic->desc[i], &config);
+		if (IS_ERR(pmic->rdev[i])) {
+			dev_err(&pdev->dev,
+				"failed to register %s regulator\n",
+				pmic->desc[i].name);
+			ret = PTR_ERR(pmic->rdev[i]);
+			goto err_unregister_regulator;
+		}
+	}
+
+	return 0;
+
+err_unregister_regulator:
+	while (--i >= 0)
+		regulator_unregister(pmic->rdev[i]);
+	return ret;
+}
+
+static __devexit int max8907_regulator_remove(struct platform_device *pdev)
+{
+	struct max8907_regulator *pmic;
+	int i;
+
+	for (i = 0; i < MAX8907_NUM_REGULATORS; i++)
+		regulator_unregister(pmic->rdev[i]);
+
+	return 0;
+}
+
+static struct platform_driver max8907_regulator_driver = {
+	.driver = {
+		   .name = "max8907-regulator",
+		   .owner = THIS_MODULE,
+		   },
+	.probe = max8907_regulator_probe,
+	.remove = __devexit_p(max8907_regulator_remove),
+};
+
+static int __init max8907_regulator_init(void)
+{
+	return platform_driver_register(&max8907_regulator_driver);
+}
+
+subsys_initcall(max8907_regulator_init);
+
+static void __exit max8907_reg_exit(void)
+{
+	platform_driver_unregister(&max8907_regulator_driver);
+}
+
+module_exit(max8907_reg_exit);
+
+MODULE_DESCRIPTION("MAX8907 regulator driver");
+MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@maxim-ic.com>");
+MODULE_LICENSE("GPL v2");
-- 
cgit v1.2.3


From 8f52a5800ab8f47a9bc430e21d5af84b6c290423 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Thu, 16 Aug 2012 15:16:05 +1000
Subject: regulator: using kfree() requires including slab.h

Fixes this build error:

drivers/regulator/twl-regulator.c: In function 'twlreg_probe':
drivers/regulator/twl-regulator.c:1229:3: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration]

Also added string.h for kmemdup().

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/twl-regulator.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers')

diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index a8365229ea6..564acae3eae 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -10,6 +10,8 @@
  */
 
 #include <linux/module.h>
+#include <linux/string.h>
+#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
-- 
cgit v1.2.3


From 7305608bc888271786e38aa27e63f846367ae842 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Thu, 16 Aug 2012 12:26:02 +0800
Subject: regulator: max8907: Fix n_voltages for MAX8907B SD1

For linear voltage mapping, the n_voltages is (max - min) / step + 1

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/max8907-regulator.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/regulator/max8907-regulator.c b/drivers/regulator/max8907-regulator.c
index bd3b28b5523..bdf21a19961 100644
--- a/drivers/regulator/max8907-regulator.c
+++ b/drivers/regulator/max8907-regulator.c
@@ -286,7 +286,8 @@ static __devinit int max8907_regulator_probe(struct platform_device *pdev)
 	    MAX8907_II2RR_VERSION_REV_B) {
 		pmic->desc[MAX8907_SD1].min_uV = 637500;
 		pmic->desc[MAX8907_SD1].uV_step = 12500;
-		pmic->desc[MAX8907_SD1].n_voltages = (1425000 - 637500) / 12500;
+		pmic->desc[MAX8907_SD1].n_voltages =
+						(1425000 - 637500) / 12500 + 1;
 	}
 
 	for (i = 0; i < MAX8907_NUM_REGULATORS; i++) {
-- 
cgit v1.2.3


From 0764ef59161a4026c44ca184b7812383feabb769 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Sat, 18 Aug 2012 14:33:05 +0800
Subject: regulator: max8907: Properly set pmic pointer in
 max8907_regulator_remove()

Add missing platform_get_drvdata() call in max8907_regulator_remove(), this
fixes below build warning:

  CC [M]  drivers/regulator/max8907-regulator.o
drivers/regulator/max8907-regulator.c: In function 'max8907_regulator_remove':
drivers/regulator/max8907-regulator.c:353:23: warning: 'pmic' is used uninitialized in this function [-Wuninitialized]

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/max8907-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/regulator/max8907-regulator.c b/drivers/regulator/max8907-regulator.c
index bdf21a19961..bddc3146c92 100644
--- a/drivers/regulator/max8907-regulator.c
+++ b/drivers/regulator/max8907-regulator.c
@@ -347,7 +347,7 @@ err_unregister_regulator:
 
 static __devexit int max8907_regulator_remove(struct platform_device *pdev)
 {
-	struct max8907_regulator *pmic;
+	struct max8907_regulator *pmic = platform_get_drvdata(pdev);
 	int i;
 
 	for (i = 0; i < MAX8907_NUM_REGULATORS; i++)
-- 
cgit v1.2.3


From db55168265699c72e6ebf7a4228029da590a3eab Mon Sep 17 00:00:00 2001
From: Stephen Warren <swarren@nvidia.com>
Date: Mon, 20 Aug 2012 09:39:10 -0600
Subject: regulator: max8907: fix compile error when !CONFIG_OF

Fix the following:

  CC [M]  drivers/regulator/max8907-regulator.o
drivers/regulator/max8907-regulator.c: In function 'max8907_regulator_probe':
drivers/regulator/max8907-regulator.c:297:12: error: 'max8907_matches' undeclared (first use in this function)

by removing direct references to max8907_matches[], which only exists when
CONFIG_OF is defined.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/max8907-regulator.c | 24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/max8907-regulator.c b/drivers/regulator/max8907-regulator.c
index bddc3146c92..3a5104f6eed 100644
--- a/drivers/regulator/max8907-regulator.c
+++ b/drivers/regulator/max8907-regulator.c
@@ -248,11 +248,31 @@ static int max8907_regulator_parse_dt(struct platform_device *pdev)
 
 	return 0;
 }
+
+static inline struct regulator_init_data *match_init_data(int index)
+{
+	return max8907_matches[index].init_data;
+}
+
+static inline struct device_node *match_of_node(int index)
+{
+	return max8907_matches[index].of_node;
+}
 #else
 static int max8907_regulator_parse_dt(struct platform_device *pdev)
 {
 	return 0;
 }
+
+static inline struct regulator_init_data *match_init_data(int index)
+{
+	return NULL;
+}
+
+static inline struct device_node *match_of_node(int index)
+{
+	return NULL;
+}
 #endif
 
 static __devinit int max8907_regulator_probe(struct platform_device *pdev)
@@ -295,11 +315,11 @@ static __devinit int max8907_regulator_probe(struct platform_device *pdev)
 		if (pdata)
 			idata = pdata->init_data[i];
 		else
-			idata = max8907_matches[i].init_data;
+			idata = match_init_data(i);
 		config.init_data = idata;
 		config.driver_data = pmic;
 		config.regmap = max8907->regmap_gen;
-		config.of_node = max8907_matches[i].of_node;
+		config.of_node = match_of_node(i);
 
 		switch (pmic->desc[i].id) {
 		case MAX8907_MBATT:
-- 
cgit v1.2.3


From a0a7014cd40b1d1d13e121e5083bd3b2bbffe348 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Mon, 20 Aug 2012 18:41:35 +0200
Subject: regulator: ab8500: provide per-regulator shift

This encodes the voltage shifts (the number of bits to shift
the register to get to the selector) into the regulator info.
We have several new variants of the AB8500 so this varies a
lot.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/ab8500.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index c884a5c4b47..e3d1d063025 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -37,6 +37,7 @@
  * @voltage_bank: bank to control regulator voltage
  * @voltage_reg: register to control regulator voltage
  * @voltage_mask: mask to control regulator voltage
+ * @voltage_shift: shift to control regulator voltage
  * @delay: startup/set voltage delay in us
  */
 struct ab8500_regulator_info {
@@ -50,6 +51,7 @@ struct ab8500_regulator_info {
 	u8 voltage_bank;
 	u8 voltage_reg;
 	u8 voltage_mask;
+	u8 voltage_shift;
 	unsigned int delay;
 };
 
@@ -195,17 +197,14 @@ static int ab8500_regulator_get_voltage_sel(struct regulator_dev *rdev)
 	}
 
 	dev_vdbg(rdev_get_dev(rdev),
-		"%s-get_voltage (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
-		" 0x%x\n",
-		info->desc.name, info->voltage_bank, info->voltage_reg,
-		info->voltage_mask, regval);
+		"%s-get_voltage (bank, reg, mask, shift, value): "
+		"0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n",
+		info->desc.name, info->voltage_bank,
+		info->voltage_reg, info->voltage_mask,
+		info->voltage_shift, regval);
 
-	/* vintcore has a different layout */
 	val = regval & info->voltage_mask;
-	if (info->desc.id == AB8500_LDO_INTCORE)
-		return val >> 0x3;
-	else
-		return val;
+	return val >> info->voltage_shift;
 }
 
 static int ab8500_regulator_set_voltage_sel(struct regulator_dev *rdev,
@@ -221,7 +220,7 @@ static int ab8500_regulator_set_voltage_sel(struct regulator_dev *rdev,
 	}
 
 	/* set the registers for the request */
-	regval = (u8)selector;
+	regval = (u8)selector << info->voltage_shift;
 	ret = abx500_mask_and_set_register_interruptible(info->dev,
 			info->voltage_bank, info->voltage_reg,
 			info->voltage_mask, regval);
@@ -343,6 +342,7 @@ static struct ab8500_regulator_info
 		.voltage_bank		= 0x03,
 		.voltage_reg		= 0x80,
 		.voltage_mask		= 0x38,
+		.voltage_shift		= 3,
 	},
 
 	/*
-- 
cgit v1.2.3


From dedae957a41b4f4523199f7a822ee4e5735640b0 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <rdunlap@xenotime.net>
Date: Sat, 18 Aug 2012 17:44:14 -0700
Subject: regulator: fix kernel-doc warnings in drivers/regulator/core.c

Fix regulator kernel-doc warnings:

Warning(drivers/regulator/core.c:2308): No description found for parameter 'rdev'
Warning(drivers/regulator/core.c:2308): Excess function parameter 'regulator' description in 'regulator_set_voltage_time_sel'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc:	Liam Girdwood <lrg@ti.com>
Cc:	Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 48385318175..d49d86d2d47 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2291,8 +2291,8 @@ int regulator_set_voltage_time(struct regulator *regulator,
 EXPORT_SYMBOL_GPL(regulator_set_voltage_time);
 
 /**
- *regulator_set_voltage_time_sel - get raise/fall time
- * @regulator: regulator source
+ * regulator_set_voltage_time_sel - get raise/fall time
+ * @rdev: regulator source device
  * @old_selector: selector for starting voltage
  * @new_selector: selector for target voltage
  *
-- 
cgit v1.2.3


From 5fc72f57e62e10d9d8347ae20f13820d811377da Mon Sep 17 00:00:00 2001
From: Stephen Warren <swarren@nvidia.com>
Date: Thu, 23 Aug 2012 12:19:18 -0600
Subject: regulator: max8907: fix use of possibly NULL idata

If a regulator is not used by a board, it's quite legitimate not to
provide platform data or a device tree node to configure it (i.e.
regulator_init_data). In that case, during MAX8907 regulator's
probe(), the idata variable will be NULL for that regulator. Prevent
dereferincing it.

If the MBATT regulator's init_data is not specified, or no name was
specified in the constraints, the regulator will be named based on
the regulator descriptor, so initialize mbatt_rail_name from there.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/max8907-regulator.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/regulator/max8907-regulator.c b/drivers/regulator/max8907-regulator.c
index 3a5104f6eed..e97af8ef3ae 100644
--- a/drivers/regulator/max8907-regulator.c
+++ b/drivers/regulator/max8907-regulator.c
@@ -323,7 +323,10 @@ static __devinit int max8907_regulator_probe(struct platform_device *pdev)
 
 		switch (pmic->desc[i].id) {
 		case MAX8907_MBATT:
-			mbatt_rail_name = idata->constraints.name;
+			if (idata && idata->constraints.name)
+				mbatt_rail_name = idata->constraints.name;
+			else
+				mbatt_rail_name = pmic->desc[i].name;
 			break;
 		case MAX8907_BBAT:
 		case MAX8907_SDBY:
-- 
cgit v1.2.3


From d154f0a61760c55dd5351e01893ffaf7b62a8eb8 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Sat, 25 Aug 2012 14:56:48 +0800
Subject: regulator: max8907: Add MODULE_ALIAS

This driver can be built as a module, add MODULE_ALIAS for it.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/max8907-regulator.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers')

diff --git a/drivers/regulator/max8907-regulator.c b/drivers/regulator/max8907-regulator.c
index e97af8ef3ae..af7607515ab 100644
--- a/drivers/regulator/max8907-regulator.c
+++ b/drivers/regulator/max8907-regulator.c
@@ -405,3 +405,4 @@ module_exit(max8907_reg_exit);
 MODULE_DESCRIPTION("MAX8907 regulator driver");
 MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@maxim-ic.com>");
 MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:max8907-regulator");
-- 
cgit v1.2.3


From ba02dfd205a9c54ac6f9db119d9328d9609615bb Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ga=C3=ABtan=20Carlier?= <gcembed@gmail.com>
Date: Tue, 28 Aug 2012 13:09:10 +0200
Subject: regulator: mc13783: add regulators sw1x and sw2x
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Gaëtan Carlier <gcembed@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/mc13783-regulator.c | 66 +++++++++++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)

(limited to 'drivers')

diff --git a/drivers/regulator/mc13783-regulator.c b/drivers/regulator/mc13783-regulator.c
index 4977b199c86..0801a6d0c12 100644
--- a/drivers/regulator/mc13783-regulator.c
+++ b/drivers/regulator/mc13783-regulator.c
@@ -21,6 +21,30 @@
 #include <linux/module.h>
 #include "mc13xxx.h"
 
+#define MC13783_REG_SWITCHERS0			24
+/* Enable does not exist for SW1A */
+#define MC13783_REG_SWITCHERS0_SW1AEN			0
+#define MC13783_REG_SWITCHERS0_SW1AVSEL			0
+#define MC13783_REG_SWITCHERS0_SW1AVSEL_M		(63 << 0)
+
+#define MC13783_REG_SWITCHERS1			25
+/* Enable does not exist for SW1B */
+#define MC13783_REG_SWITCHERS1_SW1BEN			0
+#define MC13783_REG_SWITCHERS1_SW1BVSEL			0
+#define MC13783_REG_SWITCHERS1_SW1BVSEL_M		(63 << 0)
+
+#define MC13783_REG_SWITCHERS2			26
+/* Enable does not exist for SW2A */
+#define MC13783_REG_SWITCHERS2_SW2AEN			0
+#define MC13783_REG_SWITCHERS2_SW2AVSEL			0
+#define MC13783_REG_SWITCHERS2_SW2AVSEL_M		(63 << 0)
+
+#define MC13783_REG_SWITCHERS3			27
+/* Enable does not exist for SW2B */
+#define MC13783_REG_SWITCHERS3_SW2BEN			0
+#define MC13783_REG_SWITCHERS3_SW2BVSEL			0
+#define MC13783_REG_SWITCHERS3_SW2BVSEL_M		(63 << 0)
+
 #define MC13783_REG_SWITCHERS5			29
 #define MC13783_REG_SWITCHERS5_SW3EN			(1 << 20)
 #define MC13783_REG_SWITCHERS5_SW3VSEL			18
@@ -93,6 +117,44 @@
 
 
 /* Voltage Values */
+static const int mc13783_sw1x_val[] = {
+	900000, 925000, 950000, 975000,
+	1000000, 1025000, 1050000, 1075000,
+	1100000, 1125000, 1150000, 1175000,
+	1200000, 1225000, 1250000, 1275000,
+	1300000, 1325000, 1350000, 1375000,
+	1400000, 1425000, 1450000, 1475000,
+	1500000, 1525000, 1550000, 1575000,
+	1600000, 1625000, 1650000, 1675000,
+	1700000, 1700000, 1700000, 1700000,
+	1800000, 1800000, 1800000, 1800000,
+	1850000, 1850000, 1850000, 1850000,
+	2000000, 2000000, 2000000, 2000000,
+	2100000, 2100000, 2100000, 2100000,
+	2200000, 2200000, 2200000, 2200000,
+	2200000, 2200000, 2200000, 2200000,
+	2200000, 2200000, 2200000, 2200000,
+};
+
+static const int mc13783_sw2x_val[] = {
+	900000, 925000, 950000, 975000,
+	1000000, 1025000, 1050000, 1075000,
+	1100000, 1125000, 1150000, 1175000,
+	1200000, 1225000, 1250000, 1275000,
+	1300000, 1325000, 1350000, 1375000,
+	1400000, 1425000, 1450000, 1475000,
+	1500000, 1525000, 1550000, 1575000,
+	1600000, 1625000, 1650000, 1675000,
+	1700000, 1700000, 1700000, 1700000,
+	1800000, 1800000, 1800000, 1800000,
+	1900000, 1900000, 1900000, 1900000,
+	2000000, 2000000, 2000000, 2000000,
+	2100000, 2100000, 2100000, 2100000,
+	2200000, 2200000, 2200000, 2200000,
+	2200000, 2200000, 2200000, 2200000,
+	2200000, 2200000, 2200000, 2200000,
+};
+
 static const unsigned int mc13783_sw3_val[] = {
 	5000000, 5000000, 5000000, 5500000,
 };
@@ -188,6 +250,10 @@ static struct regulator_ops mc13783_gpo_regulator_ops;
 	MC13783_DEFINE(REG, _name, _reg, _vsel_reg, _voltages)
 
 static struct mc13xxx_regulator mc13783_regulators[] = {
+	MC13783_DEFINE_SW(SW1A, SWITCHERS0, SWITCHERS0, mc13783_sw1x_val),
+	MC13783_DEFINE_SW(SW1B, SWITCHERS1, SWITCHERS1, mc13783_sw1x_val),
+	MC13783_DEFINE_SW(SW2A, SWITCHERS2, SWITCHERS2, mc13783_sw2x_val),
+	MC13783_DEFINE_SW(SW2B, SWITCHERS3, SWITCHERS3, mc13783_sw2x_val),
 	MC13783_DEFINE_SW(SW3, SWITCHERS5, SWITCHERS5, mc13783_sw3_val),
 
 	MC13783_FIXED_DEFINE(REG, VAUDIO, REGULATORMODE0, mc13783_vaudio_val),
-- 
cgit v1.2.3


From 9ffaa8689ea71ad74075dfd2a7520e6b48ecd910 Mon Sep 17 00:00:00 2001
From: "Kim, Milo" <Milo.Kim@ti.com>
Date: Wed, 5 Sep 2012 04:39:11 +0000
Subject: regulator: lp872x: remove regulator platform data dependency

 This patch enables registering the regulator driver even though
 the regulator_init_data is not defined in the platform side.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/lp872x.c | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c
index 6199d0f6cca..ddd60c6b27e 100644
--- a/drivers/regulator/lp872x.c
+++ b/drivers/regulator/lp872x.c
@@ -796,11 +796,15 @@ static int lp872x_config(struct lp872x *lp)
 static struct regulator_init_data
 *lp872x_find_regulator_init_data(int id, struct lp872x *lp)
 {
+	struct lp872x_platform_data *pdata = lp->pdata;
 	int i;
 
+	if (!pdata)
+		return NULL;
+
 	for (i = 0; i < lp->num_regulators; i++) {
-		if (lp->pdata->regulator_data[i].id == id)
-			return lp->pdata->regulator_data[i].init_data;
+		if (pdata->regulator_data[i].id == id)
+			return pdata->regulator_data[i].init_data;
 	}
 
 	return NULL;
@@ -861,18 +865,12 @@ static const struct regmap_config lp872x_regmap_config = {
 static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
 {
 	struct lp872x *lp;
-	struct lp872x_platform_data *pdata = cl->dev.platform_data;
 	int ret, size, num_regulators;
 	const int lp872x_num_regulators[] = {
 		[LP8720] = LP8720_NUM_REGULATORS,
 		[LP8725] = LP8725_NUM_REGULATORS,
 	};
 
-	if (!pdata) {
-		dev_err(&cl->dev, "no platform data\n");
-		return -EINVAL;
-	}
-
 	lp = devm_kzalloc(&cl->dev, sizeof(struct lp872x), GFP_KERNEL);
 	if (!lp)
 		goto err_mem;
@@ -892,7 +890,7 @@ static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
 	}
 
 	lp->dev = &cl->dev;
-	lp->pdata = pdata;
+	lp->pdata = cl->dev.platform_data;
 	lp->chipid = id->driver_data;
 	lp->num_regulators = num_regulators;
 	i2c_set_clientdata(cl, lp);
-- 
cgit v1.2.3


From b158fba605bf4f1c97af338dfab64c85c4937513 Mon Sep 17 00:00:00 2001
From: "Kim, Milo" <Milo.Kim@ti.com>
Date: Wed, 5 Sep 2012 04:39:16 +0000
Subject: regulator: lp872x: set the default DVS mode

 The lp872x driver has the DVS platform data which select the register address
 of the BUCK voltage.
 This patch enables updating the default DVS mode when the DVS platform data
 is not defined.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/lp872x.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c
index ddd60c6b27e..d86b6a3e750 100644
--- a/drivers/regulator/lp872x.c
+++ b/drivers/regulator/lp872x.c
@@ -86,6 +86,10 @@
 #define EXTERN_DVS_USED			0
 #define MAX_DELAY			6
 
+/* Default DVS Mode */
+#define LP8720_DEFAULT_DVS		0
+#define LP8725_DEFAULT_DVS		BIT(2)
+
 /* dump registers in regmap-debugfs */
 #define MAX_REGISTERS			0x0F
 
@@ -750,8 +754,13 @@ static int lp872x_check_dvs_validity(struct lp872x *lp)
 static int lp872x_init_dvs(struct lp872x *lp)
 {
 	int ret, gpio;
-	struct lp872x_dvs *dvs = lp->pdata->dvs;
+	struct lp872x_dvs *dvs = lp->pdata ? lp->pdata->dvs : NULL;
 	enum lp872x_dvs_state pinstate;
+	u8 mask[] = { LP8720_EXT_DVS_M, LP8725_DVS1_M | LP8725_DVS2_M };
+	u8 default_dvs_mode[] = { LP8720_DEFAULT_DVS, LP8725_DEFAULT_DVS };
+
+	if (!dvs)
+		goto set_default_dvs_mode;
 
 	ret = lp872x_check_dvs_validity(lp);
 	if (ret) {
@@ -776,6 +785,10 @@ static int lp872x_init_dvs(struct lp872x *lp)
 	lp->dvs_gpio = gpio;
 
 	return 0;
+
+set_default_dvs_mode:
+	return lp872x_update_bits(lp, LP872X_GENERAL_CFG, mask[lp->chipid],
+				default_dvs_mode[lp->chipid]);
 }
 
 static int lp872x_config(struct lp872x *lp)
-- 
cgit v1.2.3


From 86b3fef0c7b5aba1c64ac1e02e68267aeaff44a6 Mon Sep 17 00:00:00 2001
From: "Kim, Milo" <Milo.Kim@ti.com>
Date: Wed, 5 Sep 2012 04:39:23 +0000
Subject: regulator: lp872x: initialize the DVS mode

 The platform specific configuration(general_config) is optional.
 However, the DVS settings should be configured explicitly while
 loading the driver.
 This patch enables configuring the default DVS mode even though
 the platform data is not defined.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/lp872x.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c
index d86b6a3e750..b16a941c1a6 100644
--- a/drivers/regulator/lp872x.c
+++ b/drivers/regulator/lp872x.c
@@ -796,13 +796,14 @@ static int lp872x_config(struct lp872x *lp)
 	struct lp872x_platform_data *pdata = lp->pdata;
 	int ret;
 
-	if (!pdata->update_config)
-		return 0;
+	if (!pdata || !pdata->update_config)
+		goto init_dvs;
 
 	ret = lp872x_write_byte(lp, LP872X_GENERAL_CFG, pdata->general_config);
 	if (ret)
 		return ret;
 
+init_dvs:
 	return lp872x_init_dvs(lp);
 }
 
-- 
cgit v1.2.3


From 9d6da6fcc2831220a8754385ee54847e3ee6274f Mon Sep 17 00:00:00 2001
From: "Kim, Milo" <Milo.Kim@ti.com>
Date: Wed, 5 Sep 2012 04:39:33 +0000
Subject: regulator: lp872x: fix NULL pointer access problem

 The lp872x_set_dvs() is used for changing the DVS pin state.
 This function works only when the DVS platform data is defined.
 So don't assume that DVS data is always valid.
 In case the platform data is not defined, the DVS data is set to NULL
 for skipping the DVS pin control.

 DVS selection and GPIO pin number are used for the LP872x DVS pin control.
 For better readability, DVS selection argument is added in lp872x_set_dvs().

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/lp872x.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c
index b16a941c1a6..86485e823f0 100644
--- a/drivers/regulator/lp872x.c
+++ b/drivers/regulator/lp872x.c
@@ -273,9 +273,9 @@ static int lp872x_regulator_enable_time(struct regulator_dev *rdev)
 	return val > MAX_DELAY ? 0 : val * time_step_us;
 }
 
-static void lp872x_set_dvs(struct lp872x *lp, int gpio)
+static void lp872x_set_dvs(struct lp872x *lp, enum lp872x_dvs_sel dvs_sel,
+			int gpio)
 {
-	enum lp872x_dvs_sel dvs_sel = lp->pdata->dvs->vsel;
 	enum lp872x_dvs_state state;
 
 	state = dvs_sel == SEL_V1 ? DVS_HIGH : DVS_LOW;
@@ -343,10 +343,10 @@ static int lp872x_buck_set_voltage_sel(struct regulator_dev *rdev,
 	struct lp872x *lp = rdev_get_drvdata(rdev);
 	enum lp872x_regulator_id buck = rdev_get_id(rdev);
 	u8 addr, mask = LP872X_VOUT_M;
-	struct lp872x_dvs *dvs = lp->pdata->dvs;
+	struct lp872x_dvs *dvs = lp->pdata ? lp->pdata->dvs : NULL;
 
 	if (dvs && gpio_is_valid(dvs->gpio))
-		lp872x_set_dvs(lp, dvs->gpio);
+		lp872x_set_dvs(lp, dvs->vsel, dvs->gpio);
 
 	addr = lp872x_select_buck_vout_addr(lp, buck);
 	if (!lp872x_is_valid_buck_addr(addr))
-- 
cgit v1.2.3


From 5bab305d3c573afc33b241a53452f6736910b2b4 Mon Sep 17 00:00:00 2001
From: "Kim, Milo" <Milo.Kim@ti.com>
Date: Wed, 5 Sep 2012 04:39:39 +0000
Subject: regulator: lp872x: remove unnecessary function

 The lp872x_check_dvs_validity() is used for checking DVS platform data.
 If the DVS platform data is not defined, return as error code.
 Now, this is unnecessary because the default DVS mode is set in this case.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/lp872x.c | 28 ----------------------------
 1 file changed, 28 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c
index 86485e823f0..708f4b6a17d 100644
--- a/drivers/regulator/lp872x.c
+++ b/drivers/regulator/lp872x.c
@@ -729,28 +729,6 @@ static struct regulator_desc lp8725_regulator_desc[] = {
 	},
 };
 
-static int lp872x_check_dvs_validity(struct lp872x *lp)
-{
-	struct lp872x_dvs *dvs = lp->pdata->dvs;
-	u8 val = 0;
-	int ret;
-
-	ret = lp872x_read_byte(lp, LP872X_GENERAL_CFG, &val);
-	if (ret)
-		return ret;
-
-	ret = 0;
-	if (lp->chipid == LP8720) {
-		if (val & LP8720_EXT_DVS_M)
-			ret = dvs ? 0 : -EINVAL;
-	} else {
-		if ((val & LP8725_DVS1_M) == EXTERN_DVS_USED)
-			ret = dvs ? 0 : -EINVAL;
-	}
-
-	return ret;
-}
-
 static int lp872x_init_dvs(struct lp872x *lp)
 {
 	int ret, gpio;
@@ -762,12 +740,6 @@ static int lp872x_init_dvs(struct lp872x *lp)
 	if (!dvs)
 		goto set_default_dvs_mode;
 
-	ret = lp872x_check_dvs_validity(lp);
-	if (ret) {
-		dev_warn(lp->dev, "invalid dvs data: %d\n", ret);
-		return ret;
-	}
-
 	gpio = dvs->gpio;
 	if (!gpio_is_valid(gpio)) {
 		dev_err(lp->dev, "invalid gpio: %d\n", gpio);
-- 
cgit v1.2.3


From 9394b80c35760d13492a3a895add2891bc64bf86 Mon Sep 17 00:00:00 2001
From: Laxman Dewangan <ldewangan@nvidia.com>
Date: Tue, 4 Sep 2012 14:43:39 -0600
Subject: regulator: tps6586x: add support for SYS rail

Device have SYS rail which is always ON. It is system power bus. LDO5
and LDO_RTC get powered through this rail internally. Add support for
this rail and make the LDO5/LDO_RTC supply by it. Update document
accordingly.

[swarren: Instantiate the sys regulator from board-harmony-power.c to
 avoid regression.]

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/mfd/tps6586x.c                 | 13 +++++++++++++
 drivers/regulator/tps6586x-regulator.c | 20 ++++++++++++++++++--
 2 files changed, 31 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c
index 353c3481212..380a3c886d3 100644
--- a/drivers/mfd/tps6586x.c
+++ b/drivers/mfd/tps6586x.c
@@ -25,6 +25,7 @@
 #include <linux/i2c.h>
 #include <linux/regmap.h>
 #include <linux/regulator/of_regulator.h>
+#include <linux/regulator/machine.h>
 
 #include <linux/mfd/core.h>
 #include <linux/mfd/tps6586x.h>
@@ -346,6 +347,7 @@ failed:
 
 #ifdef CONFIG_OF
 static struct of_regulator_match tps6586x_matches[] = {
+	{ .name = "sys",     .driver_data = (void *)TPS6586X_ID_SYS     },
 	{ .name = "sm0",     .driver_data = (void *)TPS6586X_ID_SM_0    },
 	{ .name = "sm1",     .driver_data = (void *)TPS6586X_ID_SM_1    },
 	{ .name = "sm2",     .driver_data = (void *)TPS6586X_ID_SM_2    },
@@ -369,6 +371,7 @@ static struct tps6586x_platform_data *tps6586x_parse_dt(struct i2c_client *clien
 	struct tps6586x_platform_data *pdata;
 	struct tps6586x_subdev_info *devs;
 	struct device_node *regs;
+	const char *sys_rail_name = NULL;
 	unsigned int count;
 	unsigned int i, j;
 	int err;
@@ -391,12 +394,22 @@ static struct tps6586x_platform_data *tps6586x_parse_dt(struct i2c_client *clien
 		return NULL;
 
 	for (i = 0, j = 0; i < num && j < count; i++) {
+		struct regulator_init_data *reg_idata;
+
 		if (!tps6586x_matches[i].init_data)
 			continue;
 
+		reg_idata  = tps6586x_matches[i].init_data;
 		devs[j].name = "tps6586x-regulator";
 		devs[j].platform_data = tps6586x_matches[i].init_data;
 		devs[j].id = (int)tps6586x_matches[i].driver_data;
+		if (devs[j].id == TPS6586X_ID_SYS)
+			sys_rail_name = reg_idata->constraints.name;
+
+		if ((devs[j].id == TPS6586X_ID_LDO_5) ||
+			(devs[j].id == TPS6586X_ID_LDO_RTC))
+			reg_idata->supply_regulator = sys_rail_name;
+
 		devs[j].of_node = tps6586x_matches[i].of_node;
 		j++;
 	}
diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c
index 19241fc3005..82125269b66 100644
--- a/drivers/regulator/tps6586x-regulator.c
+++ b/drivers/regulator/tps6586x-regulator.c
@@ -162,6 +162,9 @@ static struct regulator_ops tps6586x_regulator_ops = {
 	.disable = tps6586x_regulator_disable,
 };
 
+static struct regulator_ops tps6586x_sys_regulator_ops = {
+};
+
 static const unsigned int tps6586x_ldo0_voltages[] = {
 	1200000, 1500000, 1800000, 2500000, 2700000, 2850000, 3100000, 3300000,
 };
@@ -230,15 +233,28 @@ static const unsigned int tps6586x_dvm_voltages[] = {
 	TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit)			\
 }
 
+#define TPS6586X_SYS_REGULATOR()					\
+{									\
+	.desc	= {							\
+		.supply_name = "sys",					\
+		.name	= "REG-SYS",					\
+		.ops	= &tps6586x_sys_regulator_ops,			\
+		.type	= REGULATOR_VOLTAGE,				\
+		.id	= TPS6586X_ID_SYS,				\
+		.owner	= THIS_MODULE,					\
+	},								\
+}
+
 static struct tps6586x_regulator tps6586x_regulator[] = {
+	TPS6586X_SYS_REGULATOR(),
 	TPS6586X_LDO(LDO_0, "vinldo01", ldo0, SUPPLYV1, 5, 3, ENC, 0, END, 0),
 	TPS6586X_LDO(LDO_3, "vinldo23", ldo, SUPPLYV4, 0, 3, ENC, 2, END, 2),
-	TPS6586X_LDO(LDO_5, NULL, ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6),
+	TPS6586X_LDO(LDO_5, "REG-SYS", ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6),
 	TPS6586X_LDO(LDO_6, "vinldo678", ldo, SUPPLYV3, 0, 3, ENC, 4, END, 4),
 	TPS6586X_LDO(LDO_7, "vinldo678", ldo, SUPPLYV3, 3, 3, ENC, 5, END, 5),
 	TPS6586X_LDO(LDO_8, "vinldo678", ldo, SUPPLYV2, 5, 3, ENC, 6, END, 6),
 	TPS6586X_LDO(LDO_9, "vinldo9", ldo, SUPPLYV6, 3, 3, ENE, 7, ENE, 7),
-	TPS6586X_LDO(LDO_RTC, NULL, ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7),
+	TPS6586X_LDO(LDO_RTC, "REG-SYS", ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7),
 	TPS6586X_LDO(LDO_1, "vinldo01", dvm, SUPPLYV1, 0, 5, ENC, 1, END, 1),
 	TPS6586X_LDO(SM_2, "vin-sm2", sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7),
 
-- 
cgit v1.2.3


From f2889e650a8dbd51644997aef7bae71d6ac4d423 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Mon, 27 Aug 2012 11:37:04 -0700
Subject: regulator: core: Report microvolts in sysfs even with only
 list_voltage()

If a regulator only supports a single voltage list_voltage() can be used
to report what that voltage is so add this as one of the criteria for
creating the microvolts file in sysfs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 2a3e4213865..50977a69f09 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -3020,7 +3020,8 @@ static int add_regulator_attributes(struct regulator_dev *rdev)
 
 	/* some attributes need specific methods to be displayed */
 	if ((ops->get_voltage && ops->get_voltage(rdev) >= 0) ||
-	    (ops->get_voltage_sel && ops->get_voltage_sel(rdev) >= 0)) {
+	    (ops->get_voltage_sel && ops->get_voltage_sel(rdev) >= 0) ||
+	    (ops->list_voltage && ops->list_voltage(rdev, 0) >= 0)) {
 		status = device_create_file(dev, &dev_attr_microvolts);
 		if (status < 0)
 			return status;
-- 
cgit v1.2.3


From 2b5a24a01df12fbfa3e702ad7efae27bcb852e33 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Fri, 7 Sep 2012 11:00:53 +0800
Subject: regulator: core: Fast path non-deferred disables

Users (especially framework code) may end up passing in a zero deferral
time depending on runtime conditions or configuration. If they do then
just call regulator_disable() directly to save scheduling.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
---
 drivers/regulator/core.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers')

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 50977a69f09..ed376d9f525 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1724,6 +1724,9 @@ int regulator_disable_deferred(struct regulator *regulator, int ms)
 	if (regulator->always_on)
 		return 0;
 
+	if (!ms)
+		return regulator_disable(regulator);
+
 	mutex_lock(&rdev->mutex);
 	rdev->deferred_disables++;
 	mutex_unlock(&rdev->mutex);
-- 
cgit v1.2.3


From 52b84dac436a681fa51dad2b9e57b6ea50309cbd Mon Sep 17 00:00:00 2001
From: AnilKumar Ch <anilkumar@ti.com>
Date: Fri, 7 Sep 2012 20:45:05 +0530
Subject: regulator: core: Try using the parent device for the default regmap

If the device doesn't have a regmap specified by the driver and we can't
find one on the device itself try its parent, providing a useful defualt
for many MFDs.

[Rewrite commit message -- broonie]

Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/core.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index ed376d9f525..03fad815347 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -3202,8 +3202,10 @@ regulator_register(const struct regulator_desc *regulator_desc,
 	rdev->desc = regulator_desc;
 	if (config->regmap)
 		rdev->regmap = config->regmap;
-	else
+	else if (dev_get_regmap(dev, NULL))
 		rdev->regmap = dev_get_regmap(dev, NULL);
+	else if (dev->parent)
+		rdev->regmap = dev_get_regmap(dev->parent, NULL);
 	INIT_LIST_HEAD(&rdev->consumer_list);
 	INIT_LIST_HEAD(&rdev->list);
 	BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier);
-- 
cgit v1.2.3


From 029dd3cefa46ecdd879f9b4e2df3bdf4371cc22c Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Sun, 9 Sep 2012 11:08:46 +0800
Subject: regulator: twl: Remove another unused variable warning

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/twl-regulator.c | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index 564acae3eae..7eb986a4074 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -650,13 +650,6 @@ static struct regulator_ops twl6030fixed_ops = {
 	.get_status	= twl6030reg_get_status,
 };
 
-static struct regulator_ops twl6030_fixed_resource = {
-	.enable		= twl6030reg_enable,
-	.disable	= twl6030reg_disable,
-	.is_enabled	= twl6030reg_is_enabled,
-	.get_status	= twl6030reg_get_status,
-};
-
 /*
  * SMPS status and control
  */
-- 
cgit v1.2.3


From 49d8c59927e7887ea168a040e41c22937e10c30b Mon Sep 17 00:00:00 2001
From: Yunfan Zhang <yfzhang@marvell.com>
Date: Sat, 8 Sep 2012 03:52:18 -0700
Subject: regulator: Fairchild fan53555 support

This driver supports Fairchild FAN53555 Digitally Programmable
TinyBuck Regulator. The FAN53555 is a step-down switching voltage
regulator that delivers a digitally programmable output from an
input voltage supply of 2.5V to 5.5V. The output voltage is
programmed through an I2C interface.

Signed-off-by: Yunfan Zhang <yfzhang@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/Kconfig    |  11 ++
 drivers/regulator/Makefile   |   1 +
 drivers/regulator/fan53555.c | 325 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 337 insertions(+)
 create mode 100644 drivers/regulator/fan53555.c

(limited to 'drivers')

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 1c6320c131f..a80abc4b158 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -110,6 +110,17 @@ config REGULATOR_DA9052
 	  This driver supports the voltage regulators of DA9052-BC and
 	  DA9053-AA/Bx PMIC.
 
+config REGULATOR_FAN53555
+	tristate "Fairchild FAN53555 Regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver supports Fairchild FAN53555 Digitally Programmable
+	  TinyBuck Regulator. The FAN53555 is a step-down switching voltage
+	  regulator that delivers a digitally programmable output from an
+	  input voltage supply of 2.5V to 5.5V. The output voltage is
+	  programmed through an I2C interface.
+
 config REGULATOR_ANATOP
 	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
 	depends on MFD_ANATOP
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 3a0dbc5de66..e431eed8a87 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
 obj-$(CONFIG_REGULATOR_DA9052)	+= da9052-regulator.o
 obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o
 obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
+obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o
 obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
 obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
 obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
new file mode 100644
index 00000000000..890f2b34b39
--- /dev/null
+++ b/drivers/regulator/fan53555.c
@@ -0,0 +1,325 @@
+/*
+ * FAN53555 Fairchild Digitally Programmable TinyBuck Regulator Driver.
+ *
+ * Supported Part Numbers:
+ * FAN53555UC00X/01X/03X/04X/05X
+ *
+ * Copyright (c) 2012 Marvell Technology Ltd.
+ * Yunfan Zhang <yfzhang@marvell.com>
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/regulator/fan53555.h>
+
+/* Voltage setting */
+#define FAN53555_VSEL0		0x00
+#define FAN53555_VSEL1		0x01
+/* Control register */
+#define FAN53555_CONTROL	0x02
+/* IC Type */
+#define FAN53555_ID1		0x03
+/* IC mask version */
+#define FAN53555_ID2		0x04
+/* Monitor register */
+#define FAN53555_MONITOR	0x05
+
+/* VSEL bit definitions */
+#define VSEL_BUCK_EN	(1 << 7)
+#define VSEL_MODE		(1 << 6)
+#define VSEL_NSEL_MASK	0x3F
+/* Chip ID and Verison */
+#define DIE_ID		0x0F	/* ID1 */
+#define DIE_REV		0x0F	/* ID2 */
+/* Control bit definitions */
+#define CTL_OUTPUT_DISCHG	(1 << 7)
+#define CTL_SLEW_MASK		(0x7 << 4)
+#define CTL_SLEW_SHIFT		4
+#define CTL_RESET			(1 << 2)
+
+#define FAN53555_NVOLTAGES	64	/* Numbers of voltages */
+
+/* IC Type */
+enum {
+	FAN53555_CHIP_ID_00 = 0,
+	FAN53555_CHIP_ID_01,
+	FAN53555_CHIP_ID_02,
+	FAN53555_CHIP_ID_03,
+	FAN53555_CHIP_ID_04,
+	FAN53555_CHIP_ID_05,
+};
+
+struct fan53555_device_info {
+	struct regmap *regmap;
+	struct device *dev;
+	struct regulator_desc desc;
+	struct regulator_dev *rdev;
+	struct regulator_init_data *regulator;
+	/* IC Type and Rev */
+	int chip_id;
+	int chip_rev;
+	/* Voltage setting register */
+	unsigned int vol_reg;
+	unsigned int sleep_reg;
+	/* Voltage range and step(linear) */
+	unsigned int vsel_min;
+	unsigned int vsel_max;
+	unsigned int vsel_step;
+	/* Voltage slew rate limiting */
+	unsigned int slew_rate;
+	/* Sleep voltage cache */
+	unsigned int sleep_vol_cache;
+};
+
+static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV)
+{
+	struct fan53555_device_info *di = rdev_get_drvdata(rdev);
+	int ret;
+
+	if (di->sleep_vol_cache == uV)
+		return 0;
+	ret = regulator_map_voltage_linear(rdev, uV, uV);
+	if (ret < 0)
+		return -EINVAL;
+	ret = regmap_update_bits(di->regmap, di->sleep_reg,
+					VSEL_NSEL_MASK, ret);
+	if (ret < 0)
+		return -EINVAL;
+	/* Cache the sleep voltage setting.
+	 * Might not be the real voltage which is rounded */
+	di->sleep_vol_cache = uV;
+
+	return 0;
+}
+
+static int fan53555_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct fan53555_device_info *di = rdev_get_drvdata(rdev);
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		regmap_update_bits(di->regmap, di->vol_reg,
+				VSEL_MODE, VSEL_MODE);
+		break;
+	case REGULATOR_MODE_NORMAL:
+		regmap_update_bits(di->regmap, di->vol_reg, VSEL_MODE, 0);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static unsigned int fan53555_get_mode(struct regulator_dev *rdev)
+{
+	struct fan53555_device_info *di = rdev_get_drvdata(rdev);
+	unsigned int val;
+	int ret = 0;
+
+	ret = regmap_read(di->regmap, di->vol_reg, &val);
+	if (ret < 0)
+		return ret;
+	if (val & VSEL_MODE)
+		return REGULATOR_MODE_FAST;
+	else
+		return REGULATOR_MODE_NORMAL;
+}
+
+static struct regulator_ops fan53555_regulator_ops = {
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.map_voltage = regulator_map_voltage_linear,
+	.list_voltage = regulator_list_voltage_linear,
+	.set_suspend_voltage = fan53555_set_suspend_voltage,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_mode = fan53555_set_mode,
+	.get_mode = fan53555_get_mode,
+};
+
+/* For 00,01,03,05 options:
+ * VOUT = 0.60V + NSELx * 10mV, from 0.60 to 1.23V.
+ * For 04 option:
+ * VOUT = 0.603V + NSELx * 12.826mV, from 0.603 to 1.411V.
+ * */
+static int fan53555_device_setup(struct fan53555_device_info *di,
+				struct fan53555_platform_data *pdata)
+{
+	unsigned int reg, data, mask;
+
+	/* Setup voltage control register */
+	switch (pdata->sleep_vsel_id) {
+	case FAN53555_VSEL_ID_0:
+		di->sleep_reg = FAN53555_VSEL0;
+		di->vol_reg = FAN53555_VSEL1;
+		break;
+	case FAN53555_VSEL_ID_1:
+		di->sleep_reg = FAN53555_VSEL1;
+		di->vol_reg = FAN53555_VSEL0;
+		break;
+	default:
+		dev_err(di->dev, "Invalid VSEL ID!\n");
+		return -EINVAL;
+	}
+	/* Init voltage range and step */
+	switch (di->chip_id) {
+	case FAN53555_CHIP_ID_00:
+	case FAN53555_CHIP_ID_01:
+	case FAN53555_CHIP_ID_03:
+	case FAN53555_CHIP_ID_05:
+		di->vsel_min = 600000;
+		di->vsel_max = 1230000;
+		di->vsel_step = 10000;
+		break;
+	case FAN53555_CHIP_ID_04:
+		di->vsel_min = 603000;
+		di->vsel_max = 1411000;
+		di->vsel_step = 12826;
+		break;
+	default:
+		dev_err(di->dev,
+			"Chip ID[%d]\n not supported!\n", di->chip_id);
+		return -EINVAL;
+	}
+	/* Init slew rate */
+	if (pdata->slew_rate & 0x7)
+		di->slew_rate = pdata->slew_rate;
+	else
+		di->slew_rate = FAN53555_SLEW_RATE_64MV;
+	reg = FAN53555_CONTROL;
+	data = di->slew_rate << CTL_SLEW_SHIFT;
+	mask = CTL_SLEW_MASK;
+	return regmap_update_bits(di->regmap, reg, mask, data);
+}
+
+static int fan53555_regulator_register(struct fan53555_device_info *di,
+			struct regulator_config *config)
+{
+	struct regulator_desc *rdesc = &di->desc;
+
+	rdesc->name = "fan53555-reg";
+	rdesc->ops = &fan53555_regulator_ops;
+	rdesc->type = REGULATOR_VOLTAGE;
+	rdesc->n_voltages = FAN53555_NVOLTAGES;
+	rdesc->enable_reg = di->vol_reg;
+	rdesc->enable_mask = VSEL_BUCK_EN;
+	rdesc->min_uV = di->vsel_min;
+	rdesc->uV_step = di->vsel_step;
+	rdesc->vsel_reg = di->vol_reg;
+	rdesc->vsel_mask = VSEL_NSEL_MASK;
+	rdesc->owner = THIS_MODULE;
+
+	di->rdev = regulator_register(&di->desc, config);
+	if (IS_ERR(di->rdev))
+		return PTR_ERR(di->rdev);
+	return 0;
+
+}
+
+static struct regmap_config fan53555_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int __devinit fan53555_regulator_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct fan53555_device_info *di;
+	struct fan53555_platform_data *pdata;
+	struct regulator_config config = { };
+	unsigned int val;
+	int ret;
+
+	pdata = client->dev.platform_data;
+	if (!pdata || !pdata->regulator) {
+		dev_err(&client->dev, "Platform data not found!\n");
+		return -ENODEV;
+	}
+
+	di = devm_kzalloc(&client->dev, sizeof(struct fan53555_device_info),
+					GFP_KERNEL);
+	if (!di) {
+		dev_err(&client->dev, "Failed to allocate device info data!\n");
+		return -ENOMEM;
+	}
+	di->regmap = devm_regmap_init_i2c(client, &fan53555_regmap_config);
+	if (IS_ERR(di->regmap)) {
+		dev_err(&client->dev, "Failed to allocate regmap!\n");
+		return PTR_ERR(di->regmap);
+	}
+	di->dev = &client->dev;
+	di->regulator = pdata->regulator;
+	i2c_set_clientdata(client, di);
+	/* Get chip ID */
+	ret = regmap_read(di->regmap, FAN53555_ID1, &val);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to get chip ID!\n");
+		return -ENODEV;
+	}
+	di->chip_id = val & DIE_ID;
+	/* Get chip revision */
+	ret = regmap_read(di->regmap, FAN53555_ID2, &val);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to get chip Rev!\n");
+		return -ENODEV;
+	}
+	di->chip_rev = val & DIE_REV;
+	dev_info(&client->dev, "FAN53555 Option[%d] Rev[%d] Detected!\n",
+				di->chip_id, di->chip_rev);
+	/* Device init */
+	ret = fan53555_device_setup(di, pdata);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to setup device!\n");
+		return ret;
+	}
+	/* Register regulator */
+	config.dev = di->dev;
+	config.init_data = di->regulator;
+	config.regmap = di->regmap;
+	config.driver_data = di;
+	ret = fan53555_regulator_register(di, &config);
+	if (ret < 0)
+		dev_err(&client->dev, "Failed to register regulator!\n");
+	return ret;
+
+}
+
+static int __devexit fan53555_regulator_remove(struct i2c_client *client)
+{
+	struct fan53555_device_info *di = i2c_get_clientdata(client);
+
+	regulator_unregister(di->rdev);
+	return 0;
+}
+
+static const struct i2c_device_id fan53555_id[] = {
+	{"fan53555", -1},
+	{ },
+};
+
+static struct i2c_driver fan53555_regulator_driver = {
+	.driver = {
+		.name = "fan53555-regulator",
+	},
+	.probe = fan53555_regulator_probe,
+	.remove = __devexit_p(fan53555_regulator_remove),
+	.id_table = fan53555_id,
+};
+
+module_i2c_driver(fan53555_regulator_driver);
+
+MODULE_AUTHOR("Yunfan Zhang <yfzhang@marvell.com>");
+MODULE_DESCRIPTION("FAN53555 regulator driver");
+MODULE_LICENSE("GPL v2");
-- 
cgit v1.2.3


From f59c8f9fe689790248ae7aa7426579982050638c Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Fri, 31 Aug 2012 10:36:37 -0700
Subject: regulator: core: Support bypass mode

Many regulators support a bypass mode where they simply switch their
input supply to the output. This is mainly used in low power retention
states where power consumption is extremely low so higher voltage or
less clean supplies can be used.

Support this by providing ops for the drivers and a consumer API which
allows the device to be put into bypass mode if all consumers enable it
and the machine enables permission for this.

This is not supported as a mode since the existing modes are rarely used
due to fuzzy definition and mostly redundant with modern hardware which is
able to respond promptly to load changes.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: Graeme Gregory <gg@slimlogic.co.uk>
---
 drivers/regulator/core.c | 85 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 85 insertions(+)

(limited to 'drivers')

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 48385318175..64e16053975 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -77,6 +77,7 @@ struct regulator {
 	struct device *dev;
 	struct list_head list;
 	unsigned int always_on:1;
+	unsigned int bypass:1;
 	int uA_load;
 	int min_uV;
 	int max_uV;
@@ -394,6 +395,9 @@ static ssize_t regulator_status_show(struct device *dev,
 	case REGULATOR_STATUS_STANDBY:
 		label = "standby";
 		break;
+	case REGULATOR_STATUS_BYPASS:
+		label = "bypass";
+		break;
 	case REGULATOR_STATUS_UNDEFINED:
 		label = "undefined";
 		break;
@@ -585,6 +589,27 @@ static ssize_t regulator_suspend_standby_state_show(struct device *dev,
 static DEVICE_ATTR(suspend_standby_state, 0444,
 		regulator_suspend_standby_state_show, NULL);
 
+static ssize_t regulator_bypass_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = dev_get_drvdata(dev);
+	const char *report;
+	bool bypass;
+	int ret;
+
+	ret = rdev->desc->ops->get_bypass(rdev, &bypass);
+
+	if (ret != 0)
+		report = "unknown";
+	else if (bypass)
+		report = "enabled";
+	else
+		report = "disabled";
+
+	return sprintf(buf, "%s\n", report);
+}
+static DEVICE_ATTR(bypass, 0444,
+		   regulator_bypass_show, NULL);
 
 /*
  * These are the only attributes are present for all regulators.
@@ -2673,6 +2698,59 @@ out:
 }
 EXPORT_SYMBOL_GPL(regulator_set_optimum_mode);
 
+/**
+ * regulator_allow_bypass - allow the regulator to go into bypass mode
+ *
+ * @regulator: Regulator to configure
+ * @allow: enable or disable bypass mode
+ *
+ * Allow the regulator to go into bypass mode if all other consumers
+ * for the regulator also enable bypass mode and the machine
+ * constraints allow this.  Bypass mode means that the regulator is
+ * simply passing the input directly to the output with no regulation.
+ */
+int regulator_allow_bypass(struct regulator *regulator, bool enable)
+{
+	struct regulator_dev *rdev = regulator->rdev;
+	int ret = 0;
+
+	if (!rdev->desc->ops->set_bypass)
+		return 0;
+
+	if (rdev->constraints &&
+	    !(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_BYPASS))
+		return 0;
+
+	mutex_lock(&rdev->mutex);
+
+	if (enable && !regulator->bypass) {
+		rdev->bypass_count++;
+
+		if (rdev->bypass_count == rdev->open_count) {
+			ret = rdev->desc->ops->set_bypass(rdev, enable);
+			if (ret != 0)
+				rdev->bypass_count--;
+		}
+
+	} else if (!enable && regulator->bypass) {
+		rdev->bypass_count--;
+
+		if (rdev->bypass_count != rdev->open_count) {
+			ret = rdev->desc->ops->set_bypass(rdev, enable);
+			if (ret != 0)
+				rdev->bypass_count++;
+		}
+	}
+
+	if (ret == 0)
+		regulator->bypass = enable;
+
+	mutex_unlock(&rdev->mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_allow_bypass);
+
 /**
  * regulator_register_notifier - register regulator event notifier
  * @regulator: regulator source
@@ -3036,6 +3114,11 @@ static int add_regulator_attributes(struct regulator_dev *rdev)
 		if (status < 0)
 			return status;
 	}
+	if (ops->get_bypass) {
+		status = device_create_file(dev, &dev_attr_bypass);
+		if (status < 0)
+			return status;
+	}
 
 	/* some attributes are type-specific */
 	if (rdev->desc->type == REGULATOR_CURRENT) {
@@ -3124,6 +3207,8 @@ static void rdev_init_debugfs(struct regulator_dev *rdev)
 			   &rdev->use_count);
 	debugfs_create_u32("open_count", 0444, rdev->debugfs,
 			   &rdev->open_count);
+	debugfs_create_u32("bypass_count", 0444, rdev->debugfs,
+			   &rdev->bypass_count);
 }
 
 /**
-- 
cgit v1.2.3


From df36793115b4f68181877a1c89bac54feadd965d Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Mon, 27 Aug 2012 16:04:23 -0700
Subject: regulator: core: Provide regmap get/set bypass operations

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/core.c | 41 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

(limited to 'drivers')

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 64e16053975..419805cdd9d 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2698,6 +2698,47 @@ out:
 }
 EXPORT_SYMBOL_GPL(regulator_set_optimum_mode);
 
+/**
+ * regulator_set_bypass_regmap - Default set_bypass() using regmap
+ *
+ * @rdev: device to operate on.
+ * @enable: state to set.
+ */
+int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable)
+{
+	unsigned int val;
+
+	if (enable)
+		val = rdev->desc->bypass_mask;
+	else
+		val = 0;
+
+	return regmap_update_bits(rdev->regmap, rdev->desc->bypass_reg,
+				  rdev->desc->bypass_mask, val);
+}
+EXPORT_SYMBOL_GPL(regulator_set_bypass_regmap);
+
+/**
+ * regulator_get_bypass_regmap - Default get_bypass() using regmap
+ *
+ * @rdev: device to operate on.
+ * @enable: current state.
+ */
+int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable)
+{
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(rdev->regmap, rdev->desc->bypass_reg, &val);
+	if (ret != 0)
+		return ret;
+
+	*enable = val & rdev->desc->bypass_mask;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(regulator_get_bypass_regmap);
+
 /**
  * regulator_allow_bypass - allow the regulator to go into bypass mode
  *
-- 
cgit v1.2.3


From 9a17de04ef847f674ffe64eb46b9b99e14e663fa Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Mon, 27 Aug 2012 16:04:35 -0700
Subject: regulator: arizona-ldo: Support get/set bypass

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/arizona-ldo1.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers')

diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index c8f95c07adb..80e012f1416 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -39,6 +39,8 @@ static struct regulator_ops arizona_ldo1_ops = {
 	.map_voltage = regulator_map_voltage_linear,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_bypass = regulator_get_bypass_regmap,
+	.set_bypass = regulator_set_bypass_regmap,
 };
 
 static const struct regulator_desc arizona_ldo1 = {
@@ -49,6 +51,8 @@ static const struct regulator_desc arizona_ldo1 = {
 
 	.vsel_reg = ARIZONA_LDO1_CONTROL_1,
 	.vsel_mask = ARIZONA_LDO1_VSEL_MASK,
+	.bypass_reg = ARIZONA_LDO1_CONTROL_1,
+	.bypass_mask = ARIZONA_LDO1_BYPASS,
 	.min_uV = 900000,
 	.uV_step = 50000,
 	.n_voltages = 7,
-- 
cgit v1.2.3


From e477ce075d205f9eee3e28795eae7a0efd1e54f6 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Mon, 27 Aug 2012 16:04:47 -0700
Subject: regulator: arizona-micsupp: Support get/set bypass

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/arizona-micsupp.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers')

diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c
index 450a069aa9b..d9b1f82cc5b 100644
--- a/drivers/regulator/arizona-micsupp.c
+++ b/drivers/regulator/arizona-micsupp.c
@@ -82,6 +82,9 @@ static struct regulator_ops arizona_micsupp_ops = {
 
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+
+	.get_bypass = regulator_get_bypass_regmap,
+	.set_bypass = regulator_set_bypass_regmap,
 };
 
 static const struct regulator_desc arizona_micsupp = {
@@ -95,6 +98,8 @@ static const struct regulator_desc arizona_micsupp = {
 	.vsel_mask = ARIZONA_LDO2_VSEL_MASK,
 	.enable_reg = ARIZONA_MIC_CHARGE_PUMP_1,
 	.enable_mask = ARIZONA_CPMIC_ENA,
+	.bypass_reg = ARIZONA_MIC_CHARGE_PUMP_1,
+	.bypass_mask = ARIZONA_CPMIC_BYPASS,
 
 	.owner = THIS_MODULE,
 };
-- 
cgit v1.2.3


From 22c5fb6a7dc8674424394122337c84eaf48efbdf Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Mon, 27 Aug 2012 21:52:29 -0700
Subject: regulator: wm831x-ldo: Add bypass support

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/wm831x-ldo.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers')

diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c
index 5cb70ca1e98..f203a972ded 100644
--- a/drivers/regulator/wm831x-ldo.c
+++ b/drivers/regulator/wm831x-ldo.c
@@ -237,6 +237,8 @@ static struct regulator_ops wm831x_gp_ldo_ops = {
 	.set_mode = wm831x_gp_ldo_set_mode,
 	.get_status = wm831x_gp_ldo_get_status,
 	.get_optimum_mode = wm831x_gp_ldo_get_optimum_mode,
+	.get_bypass = regulator_get_bypass_regmap,
+	.set_bypass = regulator_set_bypass_regmap,
 
 	.is_enabled = regulator_is_enabled_regmap,
 	.enable = regulator_enable_regmap,
@@ -293,6 +295,8 @@ static __devinit int wm831x_gp_ldo_probe(struct platform_device *pdev)
 	ldo->desc.vsel_mask = WM831X_LDO1_ON_VSEL_MASK;
 	ldo->desc.enable_reg = WM831X_LDO_ENABLE;
 	ldo->desc.enable_mask = 1 << id;
+	ldo->desc.bypass_reg = ldo->base;
+	ldo->desc.bypass_mask = WM831X_LDO1_SWI;
 
 	config.dev = pdev->dev.parent;
 	if (pdata)
@@ -488,6 +492,8 @@ static struct regulator_ops wm831x_aldo_ops = {
 	.get_mode = wm831x_aldo_get_mode,
 	.set_mode = wm831x_aldo_set_mode,
 	.get_status = wm831x_aldo_get_status,
+	.set_bypass = regulator_set_bypass_regmap,
+	.get_bypass = regulator_get_bypass_regmap,
 
 	.is_enabled = regulator_is_enabled_regmap,
 	.enable = regulator_enable_regmap,
@@ -544,6 +550,8 @@ static __devinit int wm831x_aldo_probe(struct platform_device *pdev)
 	ldo->desc.vsel_mask = WM831X_LDO7_ON_VSEL_MASK;
 	ldo->desc.enable_reg = WM831X_LDO_ENABLE;
 	ldo->desc.enable_mask = 1 << id;
+	ldo->desc.bypass_reg = ldo->base;
+	ldo->desc.bypass_mask = WM831X_LDO7_SWI;
 
 	config.dev = pdev->dev.parent;
 	if (pdata)
-- 
cgit v1.2.3


From b8575a1143f6d57a791c946291ba4363e07e32a3 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Fri, 7 Sep 2012 17:01:15 +0800
Subject: extcon: arizona: Use bypass mode for MICVDD

We can perform microphone detection with MICVDD in bypass mode so try to
enable that during startup for minimal power - other users or machine
constraints will prevent bypass mode being activated if it is unsuitable.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/extcon/extcon-arizona.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers')

diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 427a289f32a..6c19833ed2d 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -434,6 +434,11 @@ static int __devinit arizona_extcon_probe(struct platform_device *pdev)
 	regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE,
 			   ARIZONA_JD1_ENA, ARIZONA_JD1_ENA);
 
+	ret = regulator_allow_bypass(info->micvdd, true);
+	if (ret != 0)
+		dev_warn(arizona->dev, "Failed to set MICVDD to bypass: %d\n",
+			 ret);
+
 	pm_runtime_put(&pdev->dev);
 
 	return 0;
-- 
cgit v1.2.3


From e4c5288e410440abcc3e2e1887111b09a98304d5 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Mon, 10 Sep 2012 12:07:23 +0800
Subject: regulator: aat2870: Don't explicitly initialise the first field

Doing so generates a warning as the first field is a pointer but we use
0 to initalize it.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/aat2870-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/regulator/aat2870-regulator.c b/drivers/regulator/aat2870-regulator.c
index 6f45bfd22e8..167c93f2198 100644
--- a/drivers/regulator/aat2870-regulator.c
+++ b/drivers/regulator/aat2870-regulator.c
@@ -162,7 +162,7 @@ static struct aat2870_regulator *aat2870_get_regulator(int id)
 static int aat2870_regulator_probe(struct platform_device *pdev)
 {
 	struct aat2870_regulator *ri;
-	struct regulator_config config = { 0 };
+	struct regulator_config config = { };
 	struct regulator_dev *rdev;
 
 	ri = aat2870_get_regulator(pdev->id);
-- 
cgit v1.2.3


From 3b26e48308feaf428efb917f8de217797bfedb26 Mon Sep 17 00:00:00 2001
From: Yunfan Zhang <yfzhang@marvell.com>
Date: Sun, 9 Sep 2012 20:40:24 -0700
Subject: regulator: fan53555: remove vsel_max not used

The max voltage will be bounded by min_uV, uV_step and n_voltages, so
remove it to avoid confusing.

Signed-off-by: Yunfan Zhang <yfzhang@marvell.com>
Reviewed-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/fan53555.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index 890f2b34b39..339f4d732e9 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -74,7 +74,6 @@ struct fan53555_device_info {
 	unsigned int sleep_reg;
 	/* Voltage range and step(linear) */
 	unsigned int vsel_min;
-	unsigned int vsel_max;
 	unsigned int vsel_step;
 	/* Voltage slew rate limiting */
 	unsigned int slew_rate;
@@ -180,12 +179,10 @@ static int fan53555_device_setup(struct fan53555_device_info *di,
 	case FAN53555_CHIP_ID_03:
 	case FAN53555_CHIP_ID_05:
 		di->vsel_min = 600000;
-		di->vsel_max = 1230000;
 		di->vsel_step = 10000;
 		break;
 	case FAN53555_CHIP_ID_04:
 		di->vsel_min = 603000;
-		di->vsel_max = 1411000;
 		di->vsel_step = 12826;
 		break;
 	default:
-- 
cgit v1.2.3


From 13511def87b9f68697a0fc4c64ddacece585a471 Mon Sep 17 00:00:00 2001
From: Stephen Warren <swarren@nvidia.com>
Date: Mon, 24 Sep 2012 13:25:00 -0600
Subject: regulator: deprecate regulator-compatible DT property

When the bindings for the TPS6586x regulator were being proposed, I
asserted that DT node naming rules for bus child nodes should also be
applied to nodes inside the TPS6586x regulator node itself. In other
words, that each node providing regulator init data should be named
after the type of object it represented ("regulator") and hence that
some other property was required to indicate which regulator the node
described ("regulator-compatible"). In turn this led to multiple nodes
having the same name, thus requiring node names to use a unit address
to make them unique, thus requiring reg properties within the nodes and

However, subsequent discussion indicates that the rules I was asserting
only applies to standardized bus nodes, and within a device's own node,
the binding can basically do anything sane that it wants.

Hence, this change deprecates the register-compatible property, and
instead uses node names to replace this functionality. This greatly
simplifies the device tree content, making them smaller and more legible.

The code is changed such that old device trees continue to work.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/of_regulator.c | 25 ++++++++++++-------------
 1 file changed, 12 insertions(+), 13 deletions(-)

(limited to 'drivers')

diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index 3e4106f2bda..6f684916fd7 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -92,16 +92,18 @@ struct regulator_init_data *of_get_regulator_init_data(struct device *dev,
 EXPORT_SYMBOL_GPL(of_get_regulator_init_data);
 
 /**
- * of_regulator_match - extract regulator init data when node
- * property "regulator-compatible" matches with the regulator name.
+ * of_regulator_match - extract multiple regulator init data from device tree.
  * @dev: device requesting the data
  * @node: parent device node of the regulators
  * @matches: match table for the regulators
  * @num_matches: number of entries in match table
  *
- * This function uses a match table specified by the regulator driver and
- * looks up the corresponding init data in the device tree  if
- * regulator-compatible matches. Note that the match table is modified
+ * This function uses a match table specified by the regulator driver to
+ * parse regulator init data from the device tree. @node is expected to
+ * contain a set of child nodes, each providing the init data for one
+ * regulator. The data parsed from a child node will be matched to a regulator
+ * based on either the deprecated property regulator-compatible if present,
+ * or otherwise the child node's name. Note that the match table is modified
  * in place.
  *
  * Returns the number of matches found or a negative error code on failure.
@@ -112,26 +114,23 @@ int of_regulator_match(struct device *dev, struct device_node *node,
 {
 	unsigned int count = 0;
 	unsigned int i;
-	const char *regulator_comp;
+	const char *name;
 	struct device_node *child;
 
 	if (!dev || !node)
 		return -EINVAL;
 
 	for_each_child_of_node(node, child) {
-		regulator_comp = of_get_property(child,
+		name = of_get_property(child,
 					"regulator-compatible", NULL);
-		if (!regulator_comp) {
-			dev_err(dev, "regulator-compatible is missing for node %s\n",
-				child->name);
-			continue;
-		}
+		if (!name)
+			name = child->name;
 		for (i = 0; i < num_matches; i++) {
 			struct of_regulator_match *match = &matches[i];
 			if (match->of_node)
 				continue;
 
-			if (strcmp(match->name, regulator_comp))
+			if (strcmp(match->name, name))
 				continue;
 
 			match->init_data =
-- 
cgit v1.2.3


From e96961dabe4421b163a4b6187ede942aa450d9cc Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Thu, 16 Aug 2012 13:07:59 +0100
Subject: regulator: arizona-ldo: Remove top voltage

The highest voltage step is not supported.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/arizona-ldo1.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index c8f95c07adb..128fb949fee 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -51,7 +51,7 @@ static const struct regulator_desc arizona_ldo1 = {
 	.vsel_mask = ARIZONA_LDO1_VSEL_MASK,
 	.min_uV = 900000,
 	.uV_step = 50000,
-	.n_voltages = 7,
+	.n_voltages = 6,
 
 	.owner = THIS_MODULE,
 };
-- 
cgit v1.2.3