From 6a108a14fa356ef607be308b68337939e56ea94e Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Thu, 20 Jan 2011 14:44:16 -0800 Subject: kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar Acked-by: David Woodhouse Signed-off-by: David Rientjes Cc: Greg KH Cc: "David S. Miller" Cc: Jens Axboe Cc: Arnd Bergmann Cc: Robin Holt Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/acpi/Kconfig | 2 +- drivers/ata/Kconfig | 2 +- drivers/base/Kconfig | 2 +- drivers/char/Kconfig | 10 +++--- drivers/cpufreq/Kconfig | 2 +- drivers/firmware/Kconfig | 2 +- drivers/gpu/drm/Kconfig | 2 +- drivers/gpu/drm/drm_fb_helper.c | 4 +-- drivers/gpu/drm/nouveau/Kconfig | 2 +- drivers/gpu/vga/Kconfig | 2 +- drivers/hid/Kconfig | 64 ++++++++++++++++++------------------ drivers/hid/usbhid/Kconfig | 2 +- drivers/ide/Kconfig | 2 +- drivers/infiniband/hw/mthca/Kconfig | 2 +- drivers/infiniband/ulp/ipoib/Kconfig | 2 +- drivers/input/Kconfig | 6 ++-- drivers/input/keyboard/Kconfig | 4 +-- drivers/input/mouse/Kconfig | 10 +++--- drivers/input/serio/Kconfig | 6 ++-- drivers/input/touchscreen/Kconfig | 30 ++++++++--------- drivers/media/common/tuners/Kconfig | 2 +- drivers/media/dvb/frontends/Kconfig | 2 +- drivers/media/video/Kconfig | 2 +- drivers/net/Kconfig | 2 +- drivers/pci/pcie/Kconfig | 2 +- drivers/pcmcia/Kconfig | 12 +++---- drivers/serial/Kconfig | 4 +-- drivers/ssb/Kconfig | 2 +- drivers/usb/core/Kconfig | 6 ++-- drivers/video/Kconfig | 2 +- drivers/video/console/Kconfig | 2 +- 31 files changed, 98 insertions(+), 98 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 10c7ad59c0e..2aa042a5da6 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -318,7 +318,7 @@ config ACPI_PCI_SLOT the module will be called pci_slot. config X86_PM_TIMER - bool "Power Management Timer Support" if EMBEDDED + bool "Power Management Timer Support" if EXPERT depends on X86 default y help diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index c6b298d4c13..c2328aed083 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -783,7 +783,7 @@ config PATA_PCMCIA config PATA_PLATFORM tristate "Generic platform device PATA support" - depends on EMBEDDED || PPC || HAVE_PATA_PLATFORM + depends on EXPERT || PPC || HAVE_PATA_PLATFORM help This option enables support for generic directly connected ATA devices commonly found on embedded systems. diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig index fd96345bc35..d57e8d0fb82 100644 --- a/drivers/base/Kconfig +++ b/drivers/base/Kconfig @@ -70,7 +70,7 @@ config PREVENT_FIRMWARE_BUILD If unsure say Y here. config FW_LOADER - tristate "Userspace firmware loading support" if EMBEDDED + tristate "Userspace firmware loading support" if EXPERT default y ---help--- This option is provided for the case where no in-kernel-tree modules diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 0f175a866ef..4237602fd4c 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -5,7 +5,7 @@ menu "Character devices" config VT - bool "Virtual terminal" if EMBEDDED + bool "Virtual terminal" if EXPERT depends on !S390 select INPUT default y @@ -39,13 +39,13 @@ config VT config CONSOLE_TRANSLATIONS depends on VT default y - bool "Enable character translations in console" if EMBEDDED + bool "Enable character translations in console" if EXPERT ---help--- This enables support for font mapping and Unicode translation on virtual consoles. config VT_CONSOLE - bool "Support for console on virtual terminal" if EMBEDDED + bool "Support for console on virtual terminal" if EXPERT depends on VT default y ---help--- @@ -429,7 +429,7 @@ config SGI_MBCS source "drivers/serial/Kconfig" config UNIX98_PTYS - bool "Unix98 PTY support" if EMBEDDED + bool "Unix98 PTY support" if EXPERT default y ---help--- A pseudo terminal (PTY) is a software device consisting of two @@ -495,7 +495,7 @@ config LEGACY_PTY_COUNT config TTY_PRINTK bool "TTY driver to output user messages via printk" - depends on EMBEDDED + depends on EXPERT default n ---help--- If you say Y here, the support for writing user messages (i.e. diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index a8c8d9c19d7..ca8ee8093d6 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -71,7 +71,7 @@ config CPU_FREQ_DEFAULT_GOV_PERFORMANCE config CPU_FREQ_DEFAULT_GOV_POWERSAVE bool "powersave" - depends on EMBEDDED + depends on EXPERT select CPU_FREQ_GOV_POWERSAVE help Use the CPUFreq governor 'powersave' as default. This sets diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index e8b6a13515b..e710424b59e 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -27,7 +27,7 @@ config EDD_OFF using the kernel parameter 'edd={on|skipmbr|off}'. config FIRMWARE_MEMMAP - bool "Add firmware-provided memory map to sysfs" if EMBEDDED + bool "Add firmware-provided memory map to sysfs" if EXPERT default X86 help Add the firmware-provided (unmodified) memory map to /sys/firmware/memmap. diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 64828a7db77..bea966f8ac8 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -23,7 +23,7 @@ config DRM_KMS_HELPER tristate depends on DRM select FB - select FRAMEBUFFER_CONSOLE if !EMBEDDED + select FRAMEBUFFER_CONSOLE if !EXPERT help FB and CRTC helpers for KMS drivers. diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 5c4f9b9ecdc..6977a1ce9d9 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -1533,11 +1533,11 @@ bool drm_fb_helper_hotplug_event(struct drm_fb_helper *fb_helper) } EXPORT_SYMBOL(drm_fb_helper_hotplug_event); -/* The Kconfig DRM_KMS_HELPER selects FRAMEBUFFER_CONSOLE (if !EMBEDDED) +/* The Kconfig DRM_KMS_HELPER selects FRAMEBUFFER_CONSOLE (if !EXPERT) * but the module doesn't depend on any fb console symbols. At least * attempt to load fbcon to avoid leaving the system without a usable console. */ -#if defined(CONFIG_FRAMEBUFFER_CONSOLE_MODULE) && !defined(CONFIG_EMBEDDED) +#if defined(CONFIG_FRAMEBUFFER_CONSOLE_MODULE) && !defined(CONFIG_EXPERT) static int __init drm_fb_helper_modinit(void) { const char *name = "fbcon"; diff --git a/drivers/gpu/drm/nouveau/Kconfig b/drivers/gpu/drm/nouveau/Kconfig index 21d6c29c2d2..de70959b9ed 100644 --- a/drivers/gpu/drm/nouveau/Kconfig +++ b/drivers/gpu/drm/nouveau/Kconfig @@ -8,7 +8,7 @@ config DRM_NOUVEAU select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB - select FRAMEBUFFER_CONSOLE if !EMBEDDED + select FRAMEBUFFER_CONSOLE if !EXPERT select FB_BACKLIGHT if DRM_NOUVEAU_BACKLIGHT select ACPI_VIDEO if ACPI && X86 && BACKLIGHT_CLASS_DEVICE && VIDEO_OUTPUT_CONTROL && INPUT help diff --git a/drivers/gpu/vga/Kconfig b/drivers/gpu/vga/Kconfig index 8d0e31a2202..96c83a9a76b 100644 --- a/drivers/gpu/vga/Kconfig +++ b/drivers/gpu/vga/Kconfig @@ -1,5 +1,5 @@ config VGA_ARB - bool "VGA Arbitration" if EMBEDDED + bool "VGA Arbitration" if EXPERT default y depends on PCI help diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 24cca2f69df..2560f01c1a6 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -62,9 +62,9 @@ config HID_3M_PCT Support for 3M PCT touch screens. config HID_A4TECH - tristate "A4 tech mice" if EMBEDDED + tristate "A4 tech mice" if EXPERT depends on USB_HID - default !EMBEDDED + default !EXPERT ---help--- Support for A4 tech X5 and WOP-35 / Trust 450L mice. @@ -77,9 +77,9 @@ config HID_ACRUX_FF game controllers. config HID_APPLE - tristate "Apple {i,Power,Mac}Books" if EMBEDDED + tristate "Apple {i,Power,Mac}Books" if EXPERT depends on (USB_HID || BT_HIDP) - default !EMBEDDED + default !EXPERT ---help--- Support for some Apple devices which less or more break HID specification. @@ -88,9 +88,9 @@ config HID_APPLE MacBooks, MacBook Pros and Apple Aluminum. config HID_BELKIN - tristate "Belkin Flip KVM and Wireless keyboard" if EMBEDDED + tristate "Belkin Flip KVM and Wireless keyboard" if EXPERT depends on USB_HID - default !EMBEDDED + default !EXPERT ---help--- Support for Belkin Flip KVM and Wireless keyboard. @@ -101,16 +101,16 @@ config HID_CANDO Support for Cando dual touch panel. config HID_CHERRY - tristate "Cherry Cymotion keyboard" if EMBEDDED + tristate "Cherry Cymotion keyboard" if EXPERT depends on USB_HID - default !EMBEDDED + default !EXPERT ---help--- Support for Cherry Cymotion keyboard. config HID_CHICONY - tristate "Chicony Tactical pad" if EMBEDDED + tristate "Chicony Tactical pad" if EXPERT depends on USB_HID - default !EMBEDDED + default !EXPERT ---help--- Support for Chicony Tactical pad. @@ -130,9 +130,9 @@ config HID_PRODIKEYS and some additional multimedia keys. config HID_CYPRESS - tristate "Cypress mouse and barcode readers" if EMBEDDED + tristate "Cypress mouse and barcode readers" if EXPERT depends on USB_HID - default !EMBEDDED + default !EXPERT ---help--- Support for cypress mouse and barcode readers. @@ -174,16 +174,16 @@ config HID_ELECOM Support for the ELECOM BM084 (bluetooth mouse). config HID_EZKEY - tristate "Ezkey BTC 8193 keyboard" if EMBEDDED + tristate "Ezkey BTC 8193 keyboard" if EXPERT depends on USB_HID - default !EMBEDDED + default !EXPERT ---help--- Support for Ezkey BTC 8193 keyboard. config HID_KYE - tristate "Kye/Genius Ergo Mouse" if EMBEDDED + tristate "Kye/Genius Ergo Mouse" if EXPERT depends on USB_HID - default !EMBEDDED + default !EXPERT ---help--- Support for Kye/Genius Ergo Mouse. @@ -212,16 +212,16 @@ config HID_TWINHAN Support for Twinhan IR remote control. config HID_KENSINGTON - tristate "Kensington Slimblade Trackball" if EMBEDDED + tristate "Kensington Slimblade Trackball" if EXPERT depends on USB_HID - default !EMBEDDED + default !EXPERT ---help--- Support for Kensington Slimblade Trackball. config HID_LOGITECH - tristate "Logitech devices" if EMBEDDED + tristate "Logitech devices" if EXPERT depends on USB_HID - default !EMBEDDED + default !EXPERT ---help--- Support for Logitech devices that are not fully compliant with HID standard. @@ -276,9 +276,9 @@ config HID_MAGICMOUSE Apple Wireless "Magic" Mouse. config HID_MICROSOFT - tristate "Microsoft non-fully HID-compliant devices" if EMBEDDED + tristate "Microsoft non-fully HID-compliant devices" if EXPERT depends on USB_HID - default !EMBEDDED + default !EXPERT ---help--- Support for Microsoft devices that are not fully compliant with HID standard. @@ -289,9 +289,9 @@ config HID_MOSART Support for MosArt dual-touch panels. config HID_MONTEREY - tristate "Monterey Genius KB29E keyboard" if EMBEDDED + tristate "Monterey Genius KB29E keyboard" if EXPERT depends on USB_HID - default !EMBEDDED + default !EXPERT ---help--- Support for Monterey Genius KB29E. @@ -365,8 +365,8 @@ config HID_PICOLCD - IR config HID_PICOLCD_FB - bool "Framebuffer support" if EMBEDDED - default !EMBEDDED + bool "Framebuffer support" if EXPERT + default !EXPERT depends on HID_PICOLCD depends on HID_PICOLCD=FB || FB=y select FB_DEFERRED_IO @@ -379,8 +379,8 @@ config HID_PICOLCD_FB frambuffer device. config HID_PICOLCD_BACKLIGHT - bool "Backlight control" if EMBEDDED - default !EMBEDDED + bool "Backlight control" if EXPERT + default !EXPERT depends on HID_PICOLCD depends on HID_PICOLCD=BACKLIGHT_CLASS_DEVICE || BACKLIGHT_CLASS_DEVICE=y ---help--- @@ -388,16 +388,16 @@ config HID_PICOLCD_BACKLIGHT class. config HID_PICOLCD_LCD - bool "Contrast control" if EMBEDDED - default !EMBEDDED + bool "Contrast control" if EXPERT + default !EXPERT depends on HID_PICOLCD depends on HID_PICOLCD=LCD_CLASS_DEVICE || LCD_CLASS_DEVICE=y ---help--- Provide access to PicoLCD's LCD contrast via lcd class. config HID_PICOLCD_LEDS - bool "GPO via leds class" if EMBEDDED - default !EMBEDDED + bool "GPO via leds class" if EXPERT + default !EXPERT depends on HID_PICOLCD depends on HID_PICOLCD=LEDS_CLASS || LEDS_CLASS=y ---help--- diff --git a/drivers/hid/usbhid/Kconfig b/drivers/hid/usbhid/Kconfig index 4edb3bef94a..0f20fd17cf0 100644 --- a/drivers/hid/usbhid/Kconfig +++ b/drivers/hid/usbhid/Kconfig @@ -45,7 +45,7 @@ config USB_HIDDEV If unsure, say Y. menu "USB HID Boot Protocol drivers" - depends on USB!=n && USB_HID!=y && EMBEDDED + depends on USB!=n && USB_HID!=y && EXPERT config USB_KBD tristate "USB HIDBP Keyboard (simple Boot) support" diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 98ccfeb3f5a..9827c5e686c 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -134,7 +134,7 @@ config BLK_DEV_IDECD module will be called ide-cd. config BLK_DEV_IDECD_VERBOSE_ERRORS - bool "Verbose error logging for IDE/ATAPI CDROM driver" if EMBEDDED + bool "Verbose error logging for IDE/ATAPI CDROM driver" if EXPERT depends on BLK_DEV_IDECD default y help diff --git a/drivers/infiniband/hw/mthca/Kconfig b/drivers/infiniband/hw/mthca/Kconfig index 03efc074967..da314c3fec2 100644 --- a/drivers/infiniband/hw/mthca/Kconfig +++ b/drivers/infiniband/hw/mthca/Kconfig @@ -7,7 +7,7 @@ config INFINIBAND_MTHCA ("Tavor") and the MT25208 PCI Express HCA ("Arbel"). config INFINIBAND_MTHCA_DEBUG - bool "Verbose debugging output" if EMBEDDED + bool "Verbose debugging output" if EXPERT depends on INFINIBAND_MTHCA default y ---help--- diff --git a/drivers/infiniband/ulp/ipoib/Kconfig b/drivers/infiniband/ulp/ipoib/Kconfig index 55855eeabae..cda8eac55ff 100644 --- a/drivers/infiniband/ulp/ipoib/Kconfig +++ b/drivers/infiniband/ulp/ipoib/Kconfig @@ -24,7 +24,7 @@ config INFINIBAND_IPOIB_CM unless you limit mtu for these destinations to 2044. config INFINIBAND_IPOIB_DEBUG - bool "IP-over-InfiniBand debugging" if EMBEDDED + bool "IP-over-InfiniBand debugging" if EXPERT depends on INFINIBAND_IPOIB default y ---help--- diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig index 07c2cd43109..1903c0f5b92 100644 --- a/drivers/input/Kconfig +++ b/drivers/input/Kconfig @@ -6,7 +6,7 @@ menu "Input device support" depends on !S390 config INPUT - tristate "Generic input layer (needed for keyboard, mouse, ...)" if EMBEDDED + tristate "Generic input layer (needed for keyboard, mouse, ...)" if EXPERT default y help Say Y here if you have any input device (mouse, keyboard, tablet, @@ -67,7 +67,7 @@ config INPUT_SPARSEKMAP comment "Userland interfaces" config INPUT_MOUSEDEV - tristate "Mouse interface" if EMBEDDED + tristate "Mouse interface" if EXPERT default y help Say Y here if you want your mouse to be accessible as char devices @@ -150,7 +150,7 @@ config INPUT_EVBUG module will be called evbug. config INPUT_APMPOWER - tristate "Input Power Event -> APM Bridge" if EMBEDDED + tristate "Input Power Event -> APM Bridge" if EXPERT depends on INPUT && APM_EMULATION help Say Y here if you want suspend key events to trigger a user diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 7b3c0b8fa43..417507348ba 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -2,7 +2,7 @@ # Input core configuration # menuconfig INPUT_KEYBOARD - bool "Keyboards" if EMBEDDED || !X86 + bool "Keyboards" if EXPERT || !X86 default y help Say Y here, and a list of supported keyboards will be displayed. @@ -57,7 +57,7 @@ config KEYBOARD_ATARI module will be called atakbd. config KEYBOARD_ATKBD - tristate "AT keyboard" if EMBEDDED || !X86 + tristate "AT keyboard" if EXPERT || !X86 default y select SERIO select SERIO_LIBPS2 diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index bf5fd7f6a31..9c1e6ee8353 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -39,7 +39,7 @@ config MOUSE_PS2 module will be called psmouse. config MOUSE_PS2_ALPS - bool "ALPS PS/2 mouse protocol extension" if EMBEDDED + bool "ALPS PS/2 mouse protocol extension" if EXPERT default y depends on MOUSE_PS2 help @@ -49,7 +49,7 @@ config MOUSE_PS2_ALPS If unsure, say Y. config MOUSE_PS2_LOGIPS2PP - bool "Logitech PS/2++ mouse protocol extension" if EMBEDDED + bool "Logitech PS/2++ mouse protocol extension" if EXPERT default y depends on MOUSE_PS2 help @@ -59,7 +59,7 @@ config MOUSE_PS2_LOGIPS2PP If unsure, say Y. config MOUSE_PS2_SYNAPTICS - bool "Synaptics PS/2 mouse protocol extension" if EMBEDDED + bool "Synaptics PS/2 mouse protocol extension" if EXPERT default y depends on MOUSE_PS2 help @@ -69,7 +69,7 @@ config MOUSE_PS2_SYNAPTICS If unsure, say Y. config MOUSE_PS2_LIFEBOOK - bool "Fujitsu Lifebook PS/2 mouse protocol extension" if EMBEDDED + bool "Fujitsu Lifebook PS/2 mouse protocol extension" if EXPERT default y depends on MOUSE_PS2 && X86 && DMI help @@ -79,7 +79,7 @@ config MOUSE_PS2_LIFEBOOK If unsure, say Y. config MOUSE_PS2_TRACKPOINT - bool "IBM Trackpoint PS/2 mouse protocol extension" if EMBEDDED + bool "IBM Trackpoint PS/2 mouse protocol extension" if EXPERT default y depends on MOUSE_PS2 help diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index 307eef77a17..55f2c2293ec 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -2,7 +2,7 @@ # Input core configuration # config SERIO - tristate "Serial I/O support" if EMBEDDED || !X86 + tristate "Serial I/O support" if EXPERT || !X86 default y help Say Yes here if you have any input device that uses serial I/O to @@ -19,7 +19,7 @@ config SERIO if SERIO config SERIO_I8042 - tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86 + tristate "i8042 PC Keyboard controller" if EXPERT || !X86 default y depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && \ (!SUPERH || SH_CAYMAN) && !M68K && !BLACKFIN @@ -168,7 +168,7 @@ config SERIO_MACEPS2 module will be called maceps2. config SERIO_LIBPS2 - tristate "PS/2 driver library" if EMBEDDED + tristate "PS/2 driver library" if EXPERT depends on SERIO_I8042 || SERIO_I8042=n help Say Y here if you are using a driver for device connected diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 0c9f4b158ff..61834ae282e 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -540,62 +540,62 @@ config TOUCHSCREEN_MC13783 config TOUCHSCREEN_USB_EGALAX default y - bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED + bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_PANJIT default y - bool "PanJit device support" if EMBEDDED + bool "PanJit device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_3M default y - bool "3M/Microtouch EX II series device support" if EMBEDDED + bool "3M/Microtouch EX II series device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_ITM default y - bool "ITM device support" if EMBEDDED + bool "ITM device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_ETURBO default y - bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED + bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_GUNZE default y - bool "Gunze AHL61 device support" if EMBEDDED + bool "Gunze AHL61 device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_DMC_TSC10 default y - bool "DMC TSC-10/25 device support" if EMBEDDED + bool "DMC TSC-10/25 device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_IRTOUCH default y - bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED + bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_IDEALTEK default y - bool "IdealTEK URTC1000 device support" if EMBEDDED + bool "IdealTEK URTC1000 device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_GENERAL_TOUCH default y - bool "GeneralTouch Touchscreen device support" if EMBEDDED + bool "GeneralTouch Touchscreen device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_GOTOP default y - bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED + bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_JASTEC default y - bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EMBEDDED + bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_E2I @@ -605,17 +605,17 @@ config TOUCHSCREEN_USB_E2I config TOUCHSCREEN_USB_ZYTRONIC default y - bool "Zytronic controller" if EMBEDDED + bool "Zytronic controller" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_ETT_TC45USB default y - bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EMBEDDED + bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_NEXIO default y - bool "NEXIO/iNexio device support" if EMBEDDED + bool "NEXIO/iNexio device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_TOUCHIT213 diff --git a/drivers/media/common/tuners/Kconfig b/drivers/media/common/tuners/Kconfig index 78b089526e0..6fc79f15dcb 100644 --- a/drivers/media/common/tuners/Kconfig +++ b/drivers/media/common/tuners/Kconfig @@ -34,7 +34,7 @@ config MEDIA_TUNER config MEDIA_TUNER_CUSTOMISE bool "Customize analog and hybrid tuner modules to build" depends on MEDIA_TUNER - default y if EMBEDDED + default y if EXPERT help This allows the user to deselect tuner drivers unnecessary for their hardware from the build. Use this option with care diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index ef3e43a0319..b8519ba511e 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -1,7 +1,7 @@ config DVB_FE_CUSTOMISE bool "Customise the frontend modules to build" depends on DVB_CORE - default y if EMBEDDED + default y if EXPERT help This allows the user to select/deselect frontend drivers for their hardware from the build. diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index eb875af05e7..34e7abadcea 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -78,7 +78,7 @@ config VIDEO_FIXED_MINOR_RANGES config VIDEO_HELPER_CHIPS_AUTO bool "Autoselect pertinent encoders/decoders and other helper chips" - default y if !EMBEDDED + default y if !EXPERT ---help--- Most video cards may require additional modules to encode or decode audio/video standards. This option will autoselect diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 16fe4f9b719..03823327db2 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2864,7 +2864,7 @@ config MLX4_CORE default n config MLX4_DEBUG - bool "Verbose debugging output" if (MLX4_CORE && EMBEDDED) + bool "Verbose debugging output" if (MLX4_CORE && EXPERT) depends on MLX4_CORE default y ---help--- diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig index dda70981b7a..dc29348264c 100644 --- a/drivers/pci/pcie/Kconfig +++ b/drivers/pci/pcie/Kconfig @@ -31,7 +31,7 @@ source "drivers/pci/pcie/aer/Kconfig" # PCI Express ASPM # config PCIEASPM - bool "PCI Express ASPM control" if EMBEDDED + bool "PCI Express ASPM control" if EXPERT depends on PCI && PCIEPORTBUS default y help diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index de886f3dfd3..6e318ce4113 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -69,7 +69,7 @@ comment "PC-card bridges" config YENTA tristate "CardBus yenta-compatible bridge support" depends on PCI - select CARDBUS if !EMBEDDED + select CARDBUS if !EXPERT select PCCARD_NONSTATIC if PCMCIA != n ---help--- This option enables support for CardBus host bridges. Virtually @@ -84,27 +84,27 @@ config YENTA config YENTA_O2 default y - bool "Special initialization for O2Micro bridges" if EMBEDDED + bool "Special initialization for O2Micro bridges" if EXPERT depends on YENTA config YENTA_RICOH default y - bool "Special initialization for Ricoh bridges" if EMBEDDED + bool "Special initialization for Ricoh bridges" if EXPERT depends on YENTA config YENTA_TI default y - bool "Special initialization for TI and EnE bridges" if EMBEDDED + bool "Special initialization for TI and EnE bridges" if EXPERT depends on YENTA config YENTA_ENE_TUNE default y - bool "Auto-tune EnE bridges for CB cards" if EMBEDDED + bool "Auto-tune EnE bridges for CB cards" if EXPERT depends on YENTA_TI && CARDBUS config YENTA_TOSHIBA default y - bool "Special initialization for Toshiba ToPIC bridges" if EMBEDDED + bool "Special initialization for Toshiba ToPIC bridges" if EXPERT depends on YENTA config PD6729 diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index c1df7676a73..b1682d7f1d8 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -81,7 +81,7 @@ config SERIAL_8250_GSC default SERIAL_8250 config SERIAL_8250_PCI - tristate "8250/16550 PCI device support" if EMBEDDED + tristate "8250/16550 PCI device support" if EXPERT depends on SERIAL_8250 && PCI default SERIAL_8250 help @@ -90,7 +90,7 @@ config SERIAL_8250_PCI Saves about 9K. config SERIAL_8250_PNP - tristate "8250/16550 PNP device support" if EMBEDDED + tristate "8250/16550 PNP device support" if EXPERT depends on SERIAL_8250 && PNP default SERIAL_8250 help diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig index 2d8cc455dbc..42cdaa9a4d8 100644 --- a/drivers/ssb/Kconfig +++ b/drivers/ssb/Kconfig @@ -82,7 +82,7 @@ config SSB_SDIOHOST config SSB_SILENT bool "No SSB kernel messages" - depends on SSB && EMBEDDED + depends on SSB && EXPERT help This option turns off all Sonics Silicon Backplane printks. Note that you won't be able to identify problems, once diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index bcc24779ba0..18d02e32a3d 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -123,9 +123,9 @@ config USB_OTG config USB_OTG_WHITELIST bool "Rely on OTG Targeted Peripherals List" - depends on USB_OTG || EMBEDDED + depends on USB_OTG || EXPERT default y if USB_OTG - default n if EMBEDDED + default n if EXPERT help If you say Y here, the "otg_whitelist.h" file will be used as a product whitelist, so USB peripherals not listed there will be @@ -141,7 +141,7 @@ config USB_OTG_WHITELIST config USB_OTG_BLACKLIST_HUB bool "Disable external hubs" - depends on USB_OTG || EMBEDDED + depends on USB_OTG || EXPERT help If you say Y here, then Linux will refuse to enumerate external hubs. OTG hosts are allowed to reduce hardware diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index d916ac04aba..6bafb51bb43 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1227,7 +1227,7 @@ config FB_CARILLO_RANCH config FB_INTEL tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)" - depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL && EMBEDDED + depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL && EXPERT select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig index 5a35f22372b..2209e354f53 100644 --- a/drivers/video/console/Kconfig +++ b/drivers/video/console/Kconfig @@ -5,7 +5,7 @@ menu "Console display driver support" config VGA_CONSOLE - bool "VGA text console" if EMBEDDED || !X86 + bool "VGA text console" if EXPERT || !X86 depends on !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !SUPERH && !BLACKFIN && !AVR32 && !MN10300 && (!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER) default y help -- cgit v1.2.3