From 56f46f8c8741d02516d9150a46a5b05fe910ee11 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 5 Dec 2009 00:37:43 +0400 Subject: pata_hpt37x: use ATA_DMA_* constants Use ATA_DMA_* constants instead of the bare numbers for the BMIDE registers. Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/pata_hpt37x.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 4224cfccede..342aaaaf383 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -461,24 +461,25 @@ static void hpt370_bmdma_stop(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); - u8 dma_stat = ioread8(ap->ioaddr.bmdma_addr + 2); - u8 dma_cmd; void __iomem *bmdma = ap->ioaddr.bmdma_addr; + u8 dma_stat = ioread8(bmdma + ATA_DMA_STATUS); + u8 dma_cmd; - if (dma_stat & 0x01) { + if (dma_stat & ATA_DMA_ACTIVE) { udelay(20); - dma_stat = ioread8(bmdma + 2); + dma_stat = ioread8(bmdma + ATA_DMA_STATUS); } - if (dma_stat & 0x01) { + if (dma_stat & ATA_DMA_ACTIVE) { /* Clear the engine */ pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); udelay(10); /* Stop DMA */ - dma_cmd = ioread8(bmdma ); - iowrite8(dma_cmd & 0xFE, bmdma); + dma_cmd = ioread8(bmdma + ATA_DMA_CMD); + iowrite8(dma_cmd & ~ATA_DMA_START, bmdma + ATA_DMA_CMD); /* Clear Error */ - dma_stat = ioread8(bmdma + 2); - iowrite8(dma_stat | 0x06 , bmdma + 2); + dma_stat = ioread8(bmdma + ATA_DMA_STATUS); + iowrite8(dma_stat | ATA_DMA_INTR | ATA_DMA_ERR, + bmdma + ATA_DMA_STATUS); /* Clear the engine */ pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); udelay(10); -- cgit v1.2.3 From 60661933995bc7a09686c901439e17c2a4ea7d5d Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 7 Dec 2009 23:25:52 +0400 Subject: pata_hpt3x2n: always stretch UltraDMA timing The UltraDMA Tss timing must be stretched with ATA clock of 66 MHz, but the driver only does this when PCI clock is 66 MHz, whereas it always programs DPLL clock (which is used as the ATA clock) to 66 MHz. Signed-off-by: Sergei Shtylyov Cc: Signed-off-by: Jeff Garzik --- drivers/ata/pata_hpt3x2n.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index dd26bc73bd9..269b5dbe51b 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -25,7 +25,7 @@ #include #define DRV_NAME "pata_hpt3x2n" -#define DRV_VERSION "0.3.8" +#define DRV_VERSION "0.3.9" enum { HPT_PCI_FAST = (1 << 31), @@ -544,16 +544,16 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) pci_mhz); /* Set our private data up. We only need a few flags so we use it directly */ - if (pci_mhz > 60) { + if (pci_mhz > 60) hpriv = (void *)(PCI66 | USE_DPLL); - /* - * On HPT371N, if ATA clock is 66 MHz we must set bit 2 in - * the MISC. register to stretch the UltraDMA Tss timing. - * NOTE: This register is only writeable via I/O space. - */ - if (dev->device == PCI_DEVICE_ID_TTI_HPT371) - outb(inb(iobase + 0x9c) | 0x04, iobase + 0x9c); - } + + /* + * On HPT371N, if ATA clock is 66 MHz we must set bit 2 in + * the MISC. register to stretch the UltraDMA Tss timing. + * NOTE: This register is only writeable via I/O space. + */ + if (dev->device == PCI_DEVICE_ID_TTI_HPT371) + outb(inb(iobase + 0x9c) | 0x04, iobase + 0x9c); /* Now kick off ATA set up */ return ata_pci_sff_init_one(dev, ppi, &hpt3x2n_sht, hpriv); -- cgit v1.2.3 From 1a1b172b9672e88d37adb5925b509e9236625d7e Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 7 Dec 2009 23:30:06 +0400 Subject: pata_hpt{37x|3x2n}: unify mode programming As these drivers' set_piomode() and set_dmamode() methods are almost identical, factor out the common hpt{37x|3x2n}_set_mode() function to be called by both of them, the same as in 'pata_hpt366' driver. This results in ~5% decrease in the 'pata_hpt37x' driver binary size and in ~4% decrease in the 'pata_hpt3x2n' driver binary size (as measured on x86-32). Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/pata_hpt37x.c | 137 +++++++++++++++++++-------------------------- drivers/ata/pata_hpt3x2n.c | 69 ++++++++++------------- 2 files changed, 90 insertions(+), 116 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 342aaaaf383..9b191763e6e 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -24,7 +24,7 @@ #include #define DRV_NAME "pata_hpt37x" -#define DRV_VERSION "0.6.14" +#define DRV_VERSION "0.6.15" struct hpt_clock { u8 xfer_speed; @@ -384,20 +384,12 @@ static int hpt37x_pre_reset(struct ata_link *link, unsigned long deadline) return ata_sff_prereset(link, deadline); } -/** - * hpt370_set_piomode - PIO setup - * @ap: ATA interface - * @adev: device on the interface - * - * Perform PIO mode setup. - */ - -static void hpt370_set_piomode(struct ata_port *ap, struct ata_device *adev) +static void hpt370_set_mode(struct ata_port *ap, struct ata_device *adev, + u8 mode) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); u32 addr1, addr2; - u32 reg; - u32 mode; + u32 reg, timing, mask; u8 fast; addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); @@ -409,11 +401,31 @@ static void hpt370_set_piomode(struct ata_port *ap, struct ata_device *adev) fast |= 0x01; pci_write_config_byte(pdev, addr2, fast); + /* Determine timing mask and find matching mode entry */ + if (mode < XFER_MW_DMA_0) + mask = 0xcfc3ffff; + else if (mode < XFER_UDMA_0) + mask = 0x31c001ff; + else + mask = 0x303c0000; + + timing = hpt37x_find_mode(ap, mode); + pci_read_config_dword(pdev, addr1, ®); - mode = hpt37x_find_mode(ap, adev->pio_mode); - mode &= 0xCFC3FFFF; /* Leave DMA bits alone */ - reg &= ~0xCFC3FFFF; /* Strip timing bits */ - pci_write_config_dword(pdev, addr1, reg | mode); + reg = (reg & ~mask) | (timing & mask); + pci_write_config_dword(pdev, addr1, reg); +} +/** + * hpt370_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Perform PIO mode setup. + */ + +static void hpt370_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + hpt370_set_mode(ap, adev, adev->pio_mode); } /** @@ -421,33 +433,12 @@ static void hpt370_set_piomode(struct ata_port *ap, struct ata_device *adev) * @ap: ATA interface * @adev: Device being configured * - * Set up the channel for MWDMA or UDMA modes. Much the same as with - * PIO, load the mode number and then set MWDMA or UDMA flag. + * Set up the channel for MWDMA or UDMA modes. */ static void hpt370_set_dmamode(struct ata_port *ap, struct ata_device *adev) { - struct pci_dev *pdev = to_pci_dev(ap->host->dev); - u32 addr1, addr2; - u32 reg, mode, mask; - u8 fast; - - addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); - addr2 = 0x51 + 4 * ap->port_no; - - /* Fast interrupt prediction disable, hold off interrupt disable */ - pci_read_config_byte(pdev, addr2, &fast); - fast &= ~0x02; - fast |= 0x01; - pci_write_config_byte(pdev, addr2, fast); - - mask = adev->dma_mode < XFER_UDMA_0 ? 0x31C001FF : 0x303C0000; - - pci_read_config_dword(pdev, addr1, ®); - mode = hpt37x_find_mode(ap, adev->dma_mode); - mode &= mask; - reg &= ~mask; - pci_write_config_dword(pdev, addr1, reg | mode); + hpt370_set_mode(ap, adev, adev->dma_mode); } /** @@ -487,20 +478,12 @@ static void hpt370_bmdma_stop(struct ata_queued_cmd *qc) ata_bmdma_stop(qc); } -/** - * hpt372_set_piomode - PIO setup - * @ap: ATA interface - * @adev: device on the interface - * - * Perform PIO mode setup. - */ - -static void hpt372_set_piomode(struct ata_port *ap, struct ata_device *adev) +static void hpt372_set_mode(struct ata_port *ap, struct ata_device *adev, + u8 mode) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); u32 addr1, addr2; - u32 reg; - u32 mode; + u32 reg, timing, mask; u8 fast; addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); @@ -511,13 +494,32 @@ static void hpt372_set_piomode(struct ata_port *ap, struct ata_device *adev) fast &= ~0x07; pci_write_config_byte(pdev, addr2, fast); + /* Determine timing mask and find matching mode entry */ + if (mode < XFER_MW_DMA_0) + mask = 0xcfc3ffff; + else if (mode < XFER_UDMA_0) + mask = 0x31c001ff; + else + mask = 0x303c0000; + + timing = hpt37x_find_mode(ap, mode); + pci_read_config_dword(pdev, addr1, ®); - mode = hpt37x_find_mode(ap, adev->pio_mode); + reg = (reg & ~mask) | (timing & mask); + pci_write_config_dword(pdev, addr1, reg); +} - printk("Find mode for %d reports %X\n", adev->pio_mode, mode); - mode &= 0xCFC3FFFF; /* Leave DMA bits alone */ - reg &= ~0xCFC3FFFF; /* Strip timing bits */ - pci_write_config_dword(pdev, addr1, reg | mode); +/** + * hpt372_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Perform PIO mode setup. + */ + +static void hpt372_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + hpt372_set_mode(ap, adev, adev->pio_mode); } /** @@ -525,33 +527,12 @@ static void hpt372_set_piomode(struct ata_port *ap, struct ata_device *adev) * @ap: ATA interface * @adev: Device being configured * - * Set up the channel for MWDMA or UDMA modes. Much the same as with - * PIO, load the mode number and then set MWDMA or UDMA flag. + * Set up the channel for MWDMA or UDMA modes. */ static void hpt372_set_dmamode(struct ata_port *ap, struct ata_device *adev) { - struct pci_dev *pdev = to_pci_dev(ap->host->dev); - u32 addr1, addr2; - u32 reg, mode, mask; - u8 fast; - - addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); - addr2 = 0x51 + 4 * ap->port_no; - - /* Fast interrupt prediction disable, hold off interrupt disable */ - pci_read_config_byte(pdev, addr2, &fast); - fast &= ~0x07; - pci_write_config_byte(pdev, addr2, fast); - - mask = adev->dma_mode < XFER_UDMA_0 ? 0x31C001FF : 0x303C0000; - - pci_read_config_dword(pdev, addr1, ®); - mode = hpt37x_find_mode(ap, adev->dma_mode); - printk("Find mode for DMA %d reports %X\n", adev->dma_mode, mode); - mode &= mask; - reg &= ~mask; - pci_write_config_dword(pdev, addr1, reg | mode); + hpt372_set_mode(ap, adev, adev->dma_mode); } /** diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index 269b5dbe51b..b131c8f824d 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -25,7 +25,7 @@ #include #define DRV_NAME "pata_hpt3x2n" -#define DRV_VERSION "0.3.9" +#define DRV_VERSION "0.3.10" enum { HPT_PCI_FAST = (1 << 31), @@ -161,20 +161,12 @@ static int hpt3x2n_pre_reset(struct ata_link *link, unsigned long deadline) return ata_sff_prereset(link, deadline); } -/** - * hpt3x2n_set_piomode - PIO setup - * @ap: ATA interface - * @adev: device on the interface - * - * Perform PIO mode setup. - */ - -static void hpt3x2n_set_piomode(struct ata_port *ap, struct ata_device *adev) +static void hpt3x2n_set_mode(struct ata_port *ap, struct ata_device *adev, + u8 mode) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); u32 addr1, addr2; - u32 reg; - u32 mode; + u32 reg, timing, mask; u8 fast; addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); @@ -185,11 +177,32 @@ static void hpt3x2n_set_piomode(struct ata_port *ap, struct ata_device *adev) fast &= ~0x07; pci_write_config_byte(pdev, addr2, fast); + /* Determine timing mask and find matching mode entry */ + if (mode < XFER_MW_DMA_0) + mask = 0xcfc3ffff; + else if (mode < XFER_UDMA_0) + mask = 0x31c001ff; + else + mask = 0x303c0000; + + timing = hpt3x2n_find_mode(ap, mode); + pci_read_config_dword(pdev, addr1, ®); - mode = hpt3x2n_find_mode(ap, adev->pio_mode); - mode &= 0xCFC3FFFF; /* Leave DMA bits alone */ - reg &= ~0xCFC3FFFF; /* Strip timing bits */ - pci_write_config_dword(pdev, addr1, reg | mode); + reg = (reg & ~mask) | (timing & mask); + pci_write_config_dword(pdev, addr1, reg); +} + +/** + * hpt3x2n_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Perform PIO mode setup. + */ + +static void hpt3x2n_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + hpt3x2n_set_mode(ap, adev, adev->pio_mode); } /** @@ -197,32 +210,12 @@ static void hpt3x2n_set_piomode(struct ata_port *ap, struct ata_device *adev) * @ap: ATA interface * @adev: Device being configured * - * Set up the channel for MWDMA or UDMA modes. Much the same as with - * PIO, load the mode number and then set MWDMA or UDMA flag. + * Set up the channel for MWDMA or UDMA modes. */ static void hpt3x2n_set_dmamode(struct ata_port *ap, struct ata_device *adev) { - struct pci_dev *pdev = to_pci_dev(ap->host->dev); - u32 addr1, addr2; - u32 reg, mode, mask; - u8 fast; - - addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); - addr2 = 0x51 + 4 * ap->port_no; - - /* Fast interrupt prediction disable, hold off interrupt disable */ - pci_read_config_byte(pdev, addr2, &fast); - fast &= ~0x07; - pci_write_config_byte(pdev, addr2, fast); - - mask = adev->dma_mode < XFER_UDMA_0 ? 0x31C001FF : 0x303C0000; - - pci_read_config_dword(pdev, addr1, ®); - mode = hpt3x2n_find_mode(ap, adev->dma_mode); - mode &= mask; - reg &= ~mask; - pci_write_config_dword(pdev, addr1, reg | mode); + hpt3x2n_set_mode(ap, adev, adev->dma_mode); } /** -- cgit v1.2.3 From 859faa875ed6760fcdfaf6f1fec1155a7e43dc21 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 7 Dec 2009 23:36:15 +0400 Subject: pata_hpt366: remove redundant code There's no need to clear the fast interrupt bit in hpt366_set_mode() since we're doing it in hpt366_init_chipset() already. While at it, rename 'addr1' local variable to 'addr' and exclude 'ap->port_no' from its calculation as HPT36x are single-channel-per-function chips. Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/pata_hpt366.c | 17 ++++------------- 1 file changed, 4 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index 0bd48e8f21b..f6b285890ae 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -27,7 +27,7 @@ #include #define DRV_NAME "pata_hpt366" -#define DRV_VERSION "0.6.7" +#define DRV_VERSION "0.6.8" struct hpt_clock { u8 xfer_mode; @@ -207,17 +207,8 @@ static void hpt366_set_mode(struct ata_port *ap, struct ata_device *adev, { struct hpt_clock *clocks = ap->host->private_data; struct pci_dev *pdev = to_pci_dev(ap->host->dev); - u32 addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); - u32 addr2 = 0x51 + 4 * ap->port_no; + u32 addr = 0x40 + 4 * adev->devno; u32 mask, reg; - u8 fast; - - /* Fast interrupt prediction disable, hold off interrupt disable */ - pci_read_config_byte(pdev, addr2, &fast); - if (fast & 0x80) { - fast &= ~0x80; - pci_write_config_byte(pdev, addr2, fast); - } /* determine timing mask and find matching clock entry */ if (mode < XFER_MW_DMA_0) @@ -240,9 +231,9 @@ static void hpt366_set_mode(struct ata_port *ap, struct ata_device *adev, * on-chip PIO FIFO/buffer (and PIO MST mode as well) to avoid * problems handling I/O errors later. */ - pci_read_config_dword(pdev, addr1, ®); + pci_read_config_dword(pdev, addr, ®); reg = ((reg & ~mask) | (clocks->timing & mask)) & ~0xc0000000; - pci_write_config_dword(pdev, addr1, reg); + pci_write_config_dword(pdev, addr, reg); } /** -- cgit v1.2.3 From fd5e62e22db29a067d3f26ba54caac308eb5e3a8 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 7 Dec 2009 23:38:11 +0400 Subject: pata_hpt{37x|3x2n}: improve timing register documentation Describe UDMA timing bits 18-20 and 21 separately; add a note to bit 31 about it being meaningful for PIO only. Reformat the whole comment, while at it... Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/pata_hpt37x.c | 31 +++++++++++++++---------------- drivers/ata/pata_hpt3x2n.c | 31 +++++++++++++++---------------- 2 files changed, 30 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 9b191763e6e..228dc1a8992 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -39,25 +39,24 @@ struct hpt_chip { /* key for bus clock timings * bit - * 0:3 data_high_time. inactive time of DIOW_/DIOR_ for PIO and MW - * DMA. cycles = value + 1 - * 4:8 data_low_time. active time of DIOW_/DIOR_ for PIO and MW - * DMA. cycles = value + 1 - * 9:12 cmd_high_time. inactive time of DIOW_/DIOR_ during task file + * 0:3 data_high_time. Inactive time of DIOW_/DIOR_ for PIO and MW DMA. + * cycles = value + 1 + * 4:8 data_low_time. Active time of DIOW_/DIOR_ for PIO and MW DMA. + * cycles = value + 1 + * 9:12 cmd_high_time. Inactive time of DIOW_/DIOR_ during task file * register access. - * 13:17 cmd_low_time. active time of DIOW_/DIOR_ during task file + * 13:17 cmd_low_time. Active time of DIOW_/DIOR_ during task file * register access. - * 18:21 udma_cycle_time. clock freq and clock cycles for UDMA xfer. - * during task file register access. - * 22:24 pre_high_time. time to initialize 1st cycle for PIO and MW DMA - * xfer. - * 25:27 cmd_pre_high_time. time to initialize 1st PIO cycle for task + * 18:20 udma_cycle_time. Clock cycles for UDMA xfer. + * 21 CLK frequency for UDMA: 0=ATA clock, 1=dual ATA clock. + * 22:24 pre_high_time. Time to initialize 1st cycle for PIO and MW DMA xfer. + * 25:27 cmd_pre_high_time. Time to initialize 1st PIO cycle for task file * register access. - * 28 UDMA enable - * 29 DMA enable - * 30 PIO_MST enable. if set, the chip is in bus master mode during - * PIO. - * 31 FIFO enable. + * 28 UDMA enable. + * 29 DMA enable. + * 30 PIO_MST enable. If set, the chip is in bus master mode during + * PIO xfer. + * 31 FIFO enable. Only for PIO. */ static struct hpt_clock hpt37x_timings_33[] = { diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index b131c8f824d..4a291221f27 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -45,25 +45,24 @@ struct hpt_chip { /* key for bus clock timings * bit - * 0:3 data_high_time. inactive time of DIOW_/DIOR_ for PIO and MW - * DMA. cycles = value + 1 - * 4:8 data_low_time. active time of DIOW_/DIOR_ for PIO and MW - * DMA. cycles = value + 1 - * 9:12 cmd_high_time. inactive time of DIOW_/DIOR_ during task file + * 0:3 data_high_time. Inactive time of DIOW_/DIOR_ for PIO and MW DMA. + * cycles = value + 1 + * 4:8 data_low_time. Active time of DIOW_/DIOR_ for PIO and MW DMA. + * cycles = value + 1 + * 9:12 cmd_high_time. Inactive time of DIOW_/DIOR_ during task file * register access. - * 13:17 cmd_low_time. active time of DIOW_/DIOR_ during task file + * 13:17 cmd_low_time. Active time of DIOW_/DIOR_ during task file * register access. - * 18:21 udma_cycle_time. clock freq and clock cycles for UDMA xfer. - * during task file register access. - * 22:24 pre_high_time. time to initialize 1st cycle for PIO and MW DMA - * xfer. - * 25:27 cmd_pre_high_time. time to initialize 1st PIO cycle for task + * 18:20 udma_cycle_time. Clock cycles for UDMA xfer. + * 21 CLK frequency for UDMA: 0=ATA clock, 1=dual ATA clock. + * 22:24 pre_high_time. Time to initialize 1st cycle for PIO and MW DMA xfer. + * 25:27 cmd_pre_high_time. Time to initialize 1st PIO cycle for task file * register access. - * 28 UDMA enable - * 29 DMA enable - * 30 PIO_MST enable. if set, the chip is in bus master mode during - * PIO. - * 31 FIFO enable. + * 28 UDMA enable. + * 29 DMA enable. + * 30 PIO_MST enable. If set, the chip is in bus master mode during + * PIO xfer. + * 31 FIFO enable. Only for PIO. */ /* 66MHz DPLL clocks */ -- cgit v1.2.3 From d817898c2fc73e6ea33b58498c87a43d7e9fcd7a Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 7 Dec 2009 23:39:38 +0400 Subject: pata_hpt366: remove irrelevant TODO HPT36x chips just don't have DPLL. Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/pata_hpt366.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index f6b285890ae..3ec88f2c866 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -11,9 +11,7 @@ * * * TODO - * Maybe PLL mode - * Look into engine reset on timeout errors. Should not be - * required. + * Look into engine reset on timeout errors. Should not be required. */ -- cgit v1.2.3 From d6ef31539d715db7a0eb2d67a1a008c9d8ccf059 Mon Sep 17 00:00:00 2001 From: Shane Huang Date: Wed, 9 Dec 2009 17:23:04 +0800 Subject: ahci: Implement SATA AHCI FIS-based switching support Tested on AMD internal reference board. Signed-off-by: Shane Huang Acked-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 221 ++++++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 203 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index a6a736a7dbf..705bd8b1ea6 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -93,6 +93,9 @@ enum { AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS, AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + AHCI_RX_FIS_SZ, + AHCI_PORT_PRIV_FBS_DMA_SZ = AHCI_CMD_SLOT_SZ + + AHCI_CMD_TBL_AR_SZ + + (AHCI_RX_FIS_SZ * 16), AHCI_IRQ_ON_SG = (1 << 31), AHCI_CMD_ATAPI = (1 << 5), AHCI_CMD_WRITE = (1 << 6), @@ -170,6 +173,7 @@ enum { PORT_SCR_ERR = 0x30, /* SATA phy register: SError */ PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */ PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */ + PORT_FBS = 0x40, /* FIS-based Switching */ /* PORT_IRQ_{STAT,MASK} bits */ PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */ @@ -208,6 +212,7 @@ enum { PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */ PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */ PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */ + PORT_CMD_FBSCP = (1 << 22), /* FBS Capable Port */ PORT_CMD_PMP = (1 << 17), /* PMP attached */ PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */ PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */ @@ -222,6 +227,14 @@ enum { PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */ PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */ + PORT_FBS_DWE_OFFSET = 16, /* FBS device with error offset */ + PORT_FBS_ADO_OFFSET = 12, /* FBS active dev optimization offset */ + PORT_FBS_DEV_OFFSET = 8, /* FBS device to issue offset */ + PORT_FBS_DEV_MASK = (0xf << PORT_FBS_DEV_OFFSET), /* FBS.DEV */ + PORT_FBS_SDE = (1 << 2), /* FBS single device error */ + PORT_FBS_DEC = (1 << 1), /* FBS device error clear */ + PORT_FBS_EN = (1 << 0), /* Enable FBS */ + /* hpriv->flags bits */ AHCI_HFLAG_NO_NCQ = (1 << 0), AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */ @@ -304,6 +317,9 @@ struct ahci_port_priv { unsigned int ncq_saw_dmas:1; unsigned int ncq_saw_sdb:1; u32 intr_mask; /* interrupts to enable */ + bool fbs_supported; /* set iff FBS is supported */ + bool fbs_enabled; /* set iff FBS is enabled */ + int fbs_last_dev; /* save FBS.DEV of last FIS */ /* enclosure management info per PM slot */ struct ahci_em_priv em_priv[EM_MAX_SLOTS]; }; @@ -315,9 +331,12 @@ static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc); static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc); static int ahci_port_start(struct ata_port *ap); static void ahci_port_stop(struct ata_port *ap); +static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc); static void ahci_qc_prep(struct ata_queued_cmd *qc); static void ahci_freeze(struct ata_port *ap); static void ahci_thaw(struct ata_port *ap); +static void ahci_enable_fbs(struct ata_port *ap); +static void ahci_disable_fbs(struct ata_port *ap); static void ahci_pmp_attach(struct ata_port *ap); static void ahci_pmp_detach(struct ata_port *ap); static int ahci_softreset(struct ata_link *link, unsigned int *class, @@ -390,7 +409,7 @@ static struct scsi_host_template ahci_sht = { static struct ata_port_operations ahci_ops = { .inherits = &sata_pmp_port_ops, - .qc_defer = sata_pmp_qc_defer_cmd_switch, + .qc_defer = ahci_pmp_qc_defer, .qc_prep = ahci_qc_prep, .qc_issue = ahci_qc_issue, .qc_fill_rtf = ahci_qc_fill_rtf, @@ -2045,6 +2064,17 @@ static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl) return si; } +static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ahci_port_priv *pp = ap->private_data; + + if (!sata_pmp_attached(ap) || pp->fbs_enabled) + return ata_std_qc_defer(qc); + else + return sata_pmp_qc_defer_cmd_switch(qc); +} + static void ahci_qc_prep(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; @@ -2083,6 +2113,31 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc) ahci_fill_cmd_slot(pp, qc->tag, opts); } +static void ahci_fbs_dec_intr(struct ata_port *ap) +{ + struct ahci_port_priv *pp = ap->private_data; + void __iomem *port_mmio = ahci_port_base(ap); + u32 fbs = readl(port_mmio + PORT_FBS); + int retries = 3; + + DPRINTK("ENTER\n"); + BUG_ON(!pp->fbs_enabled); + + /* time to wait for DEC is not specified by AHCI spec, + * add a retry loop for safety. + */ + writel(fbs | PORT_FBS_DEC, port_mmio + PORT_FBS); + fbs = readl(port_mmio + PORT_FBS); + while ((fbs & PORT_FBS_DEC) && retries--) { + udelay(1); + fbs = readl(port_mmio + PORT_FBS); + } + + if (fbs & PORT_FBS_DEC) + dev_printk(KERN_ERR, ap->host->dev, + "failed to clear device error\n"); +} + static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) { struct ahci_host_priv *hpriv = ap->host->private_data; @@ -2091,12 +2146,26 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) struct ata_link *link = NULL; struct ata_queued_cmd *active_qc; struct ata_eh_info *active_ehi; + bool fbs_need_dec = false; u32 serror; - /* determine active link */ - ata_for_each_link(link, ap, EDGE) - if (ata_link_active(link)) - break; + /* determine active link with error */ + if (pp->fbs_enabled) { + void __iomem *port_mmio = ahci_port_base(ap); + u32 fbs = readl(port_mmio + PORT_FBS); + int pmp = fbs >> PORT_FBS_DWE_OFFSET; + + if ((fbs & PORT_FBS_SDE) && (pmp < ap->nr_pmp_links) && + ata_link_online(&ap->pmp_link[pmp])) { + link = &ap->pmp_link[pmp]; + fbs_need_dec = true; + } + + } else + ata_for_each_link(link, ap, EDGE) + if (ata_link_active(link)) + break; + if (!link) link = &ap->link; @@ -2153,8 +2222,13 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) } if (irq_stat & PORT_IRQ_IF_ERR) { - host_ehi->err_mask |= AC_ERR_ATA_BUS; - host_ehi->action |= ATA_EH_RESET; + if (fbs_need_dec) + active_ehi->err_mask |= AC_ERR_DEV; + else { + host_ehi->err_mask |= AC_ERR_ATA_BUS; + host_ehi->action |= ATA_EH_RESET; + } + ata_ehi_push_desc(host_ehi, "interface fatal error"); } @@ -2169,7 +2243,10 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) if (irq_stat & PORT_IRQ_FREEZE) ata_port_freeze(ap); - else + else if (fbs_need_dec) { + ata_link_abort(link); + ahci_fbs_dec_intr(ap); + } else ata_port_abort(ap); } @@ -2222,12 +2299,19 @@ static void ahci_port_intr(struct ata_port *ap) /* If the 'N' bit in word 0 of the FIS is set, * we just received asynchronous notification. * Tell libata about it. + * + * Lack of SNotification should not appear in + * ahci 1.2, so the workaround is unnecessary + * when FBS is enabled. */ - const __le32 *f = pp->rx_fis + RX_FIS_SDB; - u32 f0 = le32_to_cpu(f[0]); - - if (f0 & (1 << 15)) - sata_async_notification(ap); + if (pp->fbs_enabled) + WARN_ON_ONCE(1); + else { + const __le32 *f = pp->rx_fis + RX_FIS_SDB; + u32 f0 = le32_to_cpu(f[0]); + if (f0 & (1 << 15)) + sata_async_notification(ap); + } } } @@ -2321,6 +2405,15 @@ static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) if (qc->tf.protocol == ATA_PROT_NCQ) writel(1 << qc->tag, port_mmio + PORT_SCR_ACT); + + if (pp->fbs_enabled && pp->fbs_last_dev != qc->dev->link->pmp) { + u32 fbs = readl(port_mmio + PORT_FBS); + fbs &= ~(PORT_FBS_DEV_MASK | PORT_FBS_DEC); + fbs |= qc->dev->link->pmp << PORT_FBS_DEV_OFFSET; + writel(fbs, port_mmio + PORT_FBS); + pp->fbs_last_dev = qc->dev->link->pmp; + } + writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE); ahci_sw_activity(qc->dev->link); @@ -2333,6 +2426,9 @@ static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc) struct ahci_port_priv *pp = qc->ap->private_data; u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; + if (pp->fbs_enabled) + d2h_fis += qc->dev->link->pmp * AHCI_RX_FIS_SZ; + ata_tf_from_fis(d2h_fis, &qc->result_tf); return true; } @@ -2381,6 +2477,71 @@ static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) ahci_kick_engine(ap); } +static void ahci_enable_fbs(struct ata_port *ap) +{ + struct ahci_port_priv *pp = ap->private_data; + void __iomem *port_mmio = ahci_port_base(ap); + u32 fbs; + int rc; + + if (!pp->fbs_supported) + return; + + fbs = readl(port_mmio + PORT_FBS); + if (fbs & PORT_FBS_EN) { + pp->fbs_enabled = true; + pp->fbs_last_dev = -1; /* initialization */ + return; + } + + rc = ahci_stop_engine(ap); + if (rc) + return; + + writel(fbs | PORT_FBS_EN, port_mmio + PORT_FBS); + fbs = readl(port_mmio + PORT_FBS); + if (fbs & PORT_FBS_EN) { + dev_printk(KERN_INFO, ap->host->dev, "FBS is enabled.\n"); + pp->fbs_enabled = true; + pp->fbs_last_dev = -1; /* initialization */ + } else + dev_printk(KERN_ERR, ap->host->dev, "Failed to enable FBS\n"); + + ahci_start_engine(ap); +} + +static void ahci_disable_fbs(struct ata_port *ap) +{ + struct ahci_port_priv *pp = ap->private_data; + void __iomem *port_mmio = ahci_port_base(ap); + u32 fbs; + int rc; + + if (!pp->fbs_supported) + return; + + fbs = readl(port_mmio + PORT_FBS); + if ((fbs & PORT_FBS_EN) == 0) { + pp->fbs_enabled = false; + return; + } + + rc = ahci_stop_engine(ap); + if (rc) + return; + + writel(fbs & ~PORT_FBS_EN, port_mmio + PORT_FBS); + fbs = readl(port_mmio + PORT_FBS); + if (fbs & PORT_FBS_EN) + dev_printk(KERN_ERR, ap->host->dev, "Failed to disable FBS\n"); + else { + dev_printk(KERN_INFO, ap->host->dev, "FBS is disabled.\n"); + pp->fbs_enabled = false; + } + + ahci_start_engine(ap); +} + static void ahci_pmp_attach(struct ata_port *ap) { void __iomem *port_mmio = ahci_port_base(ap); @@ -2391,6 +2552,8 @@ static void ahci_pmp_attach(struct ata_port *ap) cmd |= PORT_CMD_PMP; writel(cmd, port_mmio + PORT_CMD); + ahci_enable_fbs(ap); + pp->intr_mask |= PORT_IRQ_BAD_PMP; writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); } @@ -2401,6 +2564,8 @@ static void ahci_pmp_detach(struct ata_port *ap) struct ahci_port_priv *pp = ap->private_data; u32 cmd; + ahci_disable_fbs(ap); + cmd = readl(port_mmio + PORT_CMD); cmd &= ~PORT_CMD_PMP; writel(cmd, port_mmio + PORT_CMD); @@ -2492,20 +2657,40 @@ static int ahci_pci_device_resume(struct pci_dev *pdev) static int ahci_port_start(struct ata_port *ap) { + struct ahci_host_priv *hpriv = ap->host->private_data; struct device *dev = ap->host->dev; struct ahci_port_priv *pp; void *mem; dma_addr_t mem_dma; + size_t dma_sz, rx_fis_sz; pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); if (!pp) return -ENOMEM; - mem = dmam_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma, - GFP_KERNEL); + /* check FBS capability */ + if ((hpriv->cap & HOST_CAP_FBS) && sata_pmp_supported(ap)) { + void __iomem *port_mmio = ahci_port_base(ap); + u32 cmd = readl(port_mmio + PORT_CMD); + if (cmd & PORT_CMD_FBSCP) + pp->fbs_supported = true; + else + dev_printk(KERN_WARNING, dev, + "The port is not capable of FBS\n"); + } + + if (pp->fbs_supported) { + dma_sz = AHCI_PORT_PRIV_FBS_DMA_SZ; + rx_fis_sz = AHCI_RX_FIS_SZ * 16; + } else { + dma_sz = AHCI_PORT_PRIV_DMA_SZ; + rx_fis_sz = AHCI_RX_FIS_SZ; + } + + mem = dmam_alloc_coherent(dev, dma_sz, &mem_dma, GFP_KERNEL); if (!mem) return -ENOMEM; - memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ); + memset(mem, 0, dma_sz); /* * First item in chunk of DMA memory: 32-slot command table, @@ -2523,8 +2708,8 @@ static int ahci_port_start(struct ata_port *ap) pp->rx_fis = mem; pp->rx_fis_dma = mem_dma; - mem += AHCI_RX_FIS_SZ; - mem_dma += AHCI_RX_FIS_SZ; + mem += rx_fis_sz; + mem_dma += rx_fis_sz; /* * Third item: data area for storing a single command -- cgit v1.2.3 From 5623cab83ea61e0420f2064216d83eab067a24c6 Mon Sep 17 00:00:00 2001 From: Seth Heasley Date: Tue, 12 Jan 2010 17:00:18 -0800 Subject: ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs Signed-off-by: Seth Heasley Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 705bd8b1ea6..89d66fa725a 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -589,6 +589,12 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */ { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */ { PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */ + { PCI_VDEVICE(INTEL, 0x1c02), board_ahci }, /* CPT AHCI */ + { PCI_VDEVICE(INTEL, 0x1c03), board_ahci }, /* CPT AHCI */ + { PCI_VDEVICE(INTEL, 0x1c04), board_ahci }, /* CPT RAID */ + { PCI_VDEVICE(INTEL, 0x1c05), board_ahci }, /* CPT RAID */ + { PCI_VDEVICE(INTEL, 0x1c06), board_ahci }, /* CPT RAID */ + { PCI_VDEVICE(INTEL, 0x1c07), board_ahci }, /* CPT RAID */ /* JMicron 360/1/3/5/6, match class to avoid IDE function */ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, -- cgit v1.2.3 From 88e8201e67aace3d86de9e75122ea525f0e7248e Mon Sep 17 00:00:00 2001 From: Seth Heasley Date: Tue, 12 Jan 2010 17:01:28 -0800 Subject: ata_piix: IDE Mode SATA patch for Intel Cougar Point DeviceIDs Signed-off-by: Seth Heasley Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 6f3f2257d0f..b5f614b9c24 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -291,6 +291,14 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x3b2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (PCH) */ { 0x8086, 0x3b2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, + /* SATA Controller IDE (CPT) */ + { 0x8086, 0x1c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, + /* SATA Controller IDE (CPT) */ + { 0x8086, 0x1c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, + /* SATA Controller IDE (CPT) */ + { 0x8086, 0x1c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (CPT) */ + { 0x8086, 0x1c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, { } /* terminate list */ }; -- cgit v1.2.3 From d88ec2e5c13261cf317b46832a7de216f6d06537 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 19 Jan 2010 10:46:32 +0900 Subject: libata: cleanup ata_sff_interrupt() host->ports[i] is never NULL if i < host->n_ports and non-NULL return from ata_qc_from_tag() guarantees that the returned qc is active. Drop unnecessary tests. Superflous () dropped as suggested by Sergei. Signed-off-by: Tejun Heo Cc: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/libata-sff.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 730ef3c384c..c62ed13b059 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -1770,18 +1770,15 @@ irqreturn_t ata_sff_interrupt(int irq, void *dev_instance) spin_lock_irqsave(&host->lock, flags); for (i = 0; i < host->n_ports; i++) { - struct ata_port *ap; + struct ata_port *ap = host->ports[i]; + struct ata_queued_cmd *qc; - ap = host->ports[i]; - if (ap && - !(ap->flags & ATA_FLAG_DISABLED)) { - struct ata_queued_cmd *qc; + if (unlikely(ap->flags & ATA_FLAG_DISABLED)) + continue; - qc = ata_qc_from_tag(ap, ap->link.active_tag); - if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) && - (qc->flags & ATA_QCFLAG_ACTIVE)) - handled |= ata_sff_host_intr(ap, qc); - } + qc = ata_qc_from_tag(ap, ap->link.active_tag); + if (qc && !(qc->tf.flags & ATA_TFLAG_POLLING)) + handled |= ata_sff_host_intr(ap, qc); } spin_unlock_irqrestore(&host->lock, flags); -- cgit v1.2.3 From 27943620cbd960f710a385ff4a538e14ed3f1922 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 19 Jan 2010 10:49:19 +0900 Subject: libata: implement spurious irq handling for SFF and apply it to piix Traditional IDE interface sucks in that it doesn't have a reliable IRQ pending bit, so if the controller raises IRQ while the driver is expecting it not to, the IRQ won't be cleared and eventually the IRQ line will be killed by interrupt subsystem. Some controllers have non-standard mechanism to indicate IRQ pending so that this condition can be detected and worked around. This patch adds an optional operation ->sff_irq_check() which will be called for each port from the ata_sff_interrupt() if an unexpected interrupt is received. If the operation returns %true, ->sff_check_status() and ->sff_irq_clear() will be cleared for the port. Note that this doesn't mark the interrupt as handled so it won't prevent IRQ subsystem from killing the IRQ if this mechanism fails to clear the spurious IRQ. This patch also implements ->sff_irq_check() for ata_piix. Note that this adds slight overhead to shared IRQ operation as IRQs which are destined for other controllers will trigger extra register accesses to check whether IDE interrupt is pending but this solves rare screaming IRQ cases and for some curious reason also helps weird BIOS related glitch on Samsung n130 as reported in bko#14314. http://bugzilla.kernel.org/show_bug.cgi?id=14314 * piix_base_ops dropped as suggested by Sergei. * Spurious IRQ detection doesn't kick in anymore if polling qc is in progress. This provides less protection but some controllers have possible data corruption issues if the wrong register is accessed while a command is in progress. Signed-off-by: Tejun Heo Reported-by: Johannes Stezenbach Reported-by: Hans Werner Cc: Alan Cox Cc: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 20 +++++++++++++++----- drivers/ata/libata-sff.c | 35 ++++++++++++++++++++++++++++++++--- 2 files changed, 47 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index b5f614b9c24..c33806654e4 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -173,6 +173,7 @@ static int piix_sidpr_scr_read(struct ata_link *link, unsigned int reg, u32 *val); static int piix_sidpr_scr_write(struct ata_link *link, unsigned int reg, u32 val); +static bool piix_irq_check(struct ata_port *ap); #ifdef CONFIG_PM static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); static int piix_pci_device_resume(struct pci_dev *pdev); @@ -317,8 +318,13 @@ static struct scsi_host_template piix_sht = { ATA_BMDMA_SHT(DRV_NAME), }; -static struct ata_port_operations piix_pata_ops = { +static struct ata_port_operations piix_sata_ops = { .inherits = &ata_bmdma32_port_ops, + .sff_irq_check = piix_irq_check, +}; + +static struct ata_port_operations piix_pata_ops = { + .inherits = &piix_sata_ops, .cable_detect = ata_cable_40wire, .set_piomode = piix_set_piomode, .set_dmamode = piix_set_dmamode, @@ -336,10 +342,6 @@ static struct ata_port_operations ich_pata_ops = { .set_dmamode = ich_set_dmamode, }; -static struct ata_port_operations piix_sata_ops = { - .inherits = &ata_bmdma32_port_ops, -}; - static struct ata_port_operations piix_sidpr_sata_ops = { .inherits = &piix_sata_ops, .hardreset = sata_std_hardreset, @@ -970,6 +972,14 @@ static int piix_sidpr_scr_write(struct ata_link *link, return 0; } +static bool piix_irq_check(struct ata_port *ap) +{ + if (unlikely(!ap->ioaddr.bmdma_addr)) + return false; + + return ap->ops->bmdma_status(ap) & ATA_DMA_INTR; +} + #ifdef CONFIG_PM static int piix_broken_suspend(void) { diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index c62ed13b059..c2661ea7033 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -1763,7 +1763,7 @@ irqreturn_t ata_sff_interrupt(int irq, void *dev_instance) { struct ata_host *host = dev_instance; unsigned int i; - unsigned int handled = 0; + unsigned int handled = 0, polling = 0; unsigned long flags; /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */ @@ -1777,8 +1777,37 @@ irqreturn_t ata_sff_interrupt(int irq, void *dev_instance) continue; qc = ata_qc_from_tag(ap, ap->link.active_tag); - if (qc && !(qc->tf.flags & ATA_TFLAG_POLLING)) - handled |= ata_sff_host_intr(ap, qc); + if (qc) { + if (!(qc->tf.flags & ATA_TFLAG_POLLING)) + handled |= ata_sff_host_intr(ap, qc); + else + polling |= 1 << i; + } + } + + /* + * If no port was expecting IRQ but the controller is actually + * asserting IRQ line, nobody cared will ensue. Check IRQ + * pending status if available and clear spurious IRQ. + */ + if (!handled) { + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + if (polling & (1 << i)) + continue; + + if (!ap->ops->sff_irq_check || + !ap->ops->sff_irq_check(ap)) + continue; + + if (printk_ratelimit()) + ata_port_printk(ap, KERN_INFO, + "clearing spurious IRQ\n"); + + ap->ops->sff_check_status(ap); + ap->ops->sff_irq_clear(ap); + } } spin_unlock_irqrestore(&host->lock, flags); -- cgit v1.2.3 From 9ffc5da5e1e57592da9c22d83a98c63afc8d985c Mon Sep 17 00:00:00 2001 From: Robert Hancock Date: Tue, 19 Jan 2010 23:03:39 -0600 Subject: libata: make functions/variables static Make some variables in ahci and a function in pata_pcmcia static, as found using sparse. Signed-off-by: Robert Hancock Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 8 ++++---- drivers/ata/pata_pcmcia.c | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 89d66fa725a..6bd930b93bc 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -375,10 +375,10 @@ static ssize_t ahci_show_host_version(struct device *dev, static ssize_t ahci_show_port_cmd(struct device *dev, struct device_attribute *attr, char *buf); -DEVICE_ATTR(ahci_host_caps, S_IRUGO, ahci_show_host_caps, NULL); -DEVICE_ATTR(ahci_host_cap2, S_IRUGO, ahci_show_host_cap2, NULL); -DEVICE_ATTR(ahci_host_version, S_IRUGO, ahci_show_host_version, NULL); -DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL); +static DEVICE_ATTR(ahci_host_caps, S_IRUGO, ahci_show_host_caps, NULL); +static DEVICE_ATTR(ahci_host_cap2, S_IRUGO, ahci_show_host_cap2, NULL); +static DEVICE_ATTR(ahci_host_version, S_IRUGO, ahci_show_host_version, NULL); +static DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL); static struct device_attribute *ahci_shost_attrs[] = { &dev_attr_link_power_management_policy, diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 1b392c9e853..36103531fee 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -136,7 +136,7 @@ static unsigned int ata_data_xfer_8bit(struct ata_device *dev, * */ -void pcmcia_8bit_drain_fifo(struct ata_queued_cmd *qc) +static void pcmcia_8bit_drain_fifo(struct ata_queued_cmd *qc) { int count; struct ata_port *ap; -- cgit v1.2.3 From 02d1d6160ffe13f4ebc6f85f72366a5da0b1fb9b Mon Sep 17 00:00:00 2001 From: Bart Hartgers Date: Sun, 17 Jan 2010 00:56:54 +0100 Subject: sata_via: Correctly setup PIO/DMA for pata slave on vt6421. Before only the timings for master were set. Datasheet can be found here: ftp://ftp.vtbridge.org/Docs/Storage/DS_VT6421A_100_CCPL.PDF Surprisingly, a slave drive works without this patch. According to the datasheet, the controller by default derives the DMA mode from the Set Features command issued to a drive. Not sure about the PIO timings, though. The real problem is that the timings for the master effectively are the ones tuned for the slave. If these support different UDMA-settings, there is trouble, especially when the slave supports a higher UDMA than the master. Anyhow, using the same mechanism for both master and slave seems like a good idea. Signed-off-by: Bart Hartgers Acked-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/sata_via.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 02efd9a83d2..2a17fa37516 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -44,7 +44,7 @@ #include #define DRV_NAME "sata_via" -#define DRV_VERSION "2.4" +#define DRV_VERSION "2.5" /* * vt8251 is different from other sata controllers of VIA. It has two @@ -392,14 +392,16 @@ static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); static const u8 pio_bits[] = { 0xA8, 0x65, 0x65, 0x31, 0x20 }; - pci_write_config_byte(pdev, PATA_PIO_TIMING, pio_bits[adev->pio_mode - XFER_PIO_0]); + pci_write_config_byte(pdev, PATA_PIO_TIMING - adev->devno, + pio_bits[adev->pio_mode - XFER_PIO_0]); } static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); static const u8 udma_bits[] = { 0xEE, 0xE8, 0xE6, 0xE4, 0xE2, 0xE1, 0xE0, 0xE0 }; - pci_write_config_byte(pdev, PATA_UDMA_TIMING, udma_bits[adev->dma_mode - XFER_UDMA_0]); + pci_write_config_byte(pdev, PATA_UDMA_TIMING - adev->devno, + udma_bits[adev->dma_mode - XFER_UDMA_0]); } static const unsigned int svia_bar_sizes[] = { -- cgit v1.2.3 From 9e8808a99c6decdb4ab78081a26d3752339f424c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 18 Jan 2010 18:13:57 +0100 Subject: libata: fix CFA handling in ide_timing_compute() Use standard cycle timing for CFA PIO5 and PIO6 modes. Based on commit 74638c8 for IDE subsystem. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 6728328f3be..9c77b0d1a9d 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -3211,6 +3211,7 @@ const struct ata_timing *ata_timing_find_mode(u8 xfer_mode) int ata_timing_compute(struct ata_device *adev, unsigned short speed, struct ata_timing *t, int T, int UT) { + const u16 *id = adev->id; const struct ata_timing *s; struct ata_timing p; @@ -3228,14 +3229,18 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, * PIO/MW_DMA cycle timing. */ - if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ + if (id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ memset(&p, 0, sizeof(p)); + if (speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) { - if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO]; - else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY]; - } else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) { - p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN]; - } + if (speed <= XFER_PIO_2) + p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO]; + else if ((speed <= XFER_PIO_4) || + (speed == XFER_PIO_5 && !ata_id_is_cfa(id))) + p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY]; + } else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) + p.cycle = id[ATA_ID_EIDE_DMA_MIN]; + ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B); } -- cgit v1.2.3 From d8b3d8cfe6240178ac717e143438bf51364311e4 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 18 Jan 2010 18:14:05 +0100 Subject: pata_ali: documentation fixes Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Jeff Garzik --- drivers/ata/pata_ali.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index 9434114b2ca..63ba48c9af3 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -159,8 +159,7 @@ static void ali_fifo_control(struct ata_port *ap, struct ata_device *adev, int o * ali_program_modes - load mode registers * @ap: ALi channel to load * @adev: Device the timing is for - * @cmd: Command timing - * @data: Data timing + * @t: timing data * @ultra: UDMA timing or zero for off * * Loads the timing registers for cmd/data and disable UDMA if @@ -202,8 +201,7 @@ static void ali_program_modes(struct ata_port *ap, struct ata_device *adev, stru * @ap: ATA interface * @adev: ATA device * - * Program the ALi registers for PIO mode. FIXME: add timings for - * PIO5. + * Program the ALi registers for PIO mode. */ static void ali_set_piomode(struct ata_port *ap, struct ata_device *adev) @@ -237,7 +235,7 @@ static void ali_set_piomode(struct ata_port *ap, struct ata_device *adev) * @ap: ATA interface * @adev: ATA device * - * FIXME: MWDMA timings + * Program the ALi registers for DMA mode. */ static void ali_set_dmamode(struct ata_port *ap, struct ata_device *adev) -- cgit v1.2.3 From a2bd62207af4be8f5fe815ff90cc309056407829 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 18 Jan 2010 18:14:55 +0100 Subject: pata_cmd64x: fix PIO setup Fix incorrect handling of recovery clocks value == 16 resulting in overclocked recovery timings & potentially underclocked active timings. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Jeff Garzik --- drivers/ata/pata_cmd64x.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c index 0efb1f58f25..db08c9d1a33 100644 --- a/drivers/ata/pata_cmd64x.c +++ b/drivers/ata/pata_cmd64x.c @@ -2,6 +2,7 @@ * pata_cmd64x.c - CMD64x PATA for new ATA layer * (C) 2005 Red Hat Inc * Alan Cox + * (C) 2009-2010 Bartlomiej Zolnierkiewicz * * Based upon * linux/drivers/ide/pci/cmd64x.c Version 1.30 Sept 10, 2002 @@ -147,7 +148,9 @@ static void cmd64x_set_timing(struct ata_port *ap, struct ata_device *adev, u8 m /* Now convert the clocks into values we can actually stuff into the chip */ - if (t.recover > 1) + if (t.recover == 16) + t.recover = 0; + else if (t.recover > 1) t.recover--; else t.recover = 15; -- cgit v1.2.3 From d62f5576efc4886c0f3633c2652c3a924e043be9 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 18 Jan 2010 18:15:04 +0100 Subject: pata_cmd64x: fix handling of address setup timings Account for the requirements of the DMA mode currently used by the pair device. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Jeff Garzik --- drivers/ata/pata_cmd64x.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c index db08c9d1a33..0235a1d3c2f 100644 --- a/drivers/ata/pata_cmd64x.c +++ b/drivers/ata/pata_cmd64x.c @@ -131,8 +131,14 @@ static void cmd64x_set_timing(struct ata_port *ap, struct ata_device *adev, u8 m if (pair) { struct ata_timing tp; + ata_timing_compute(pair, pair->pio_mode, &tp, T, 0); ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP); + if (pair->dma_mode) { + ata_timing_compute(pair, pair->dma_mode, + &tp, T, 0); + ata_timing_merge(&tp, &t, &t, ATA_TIMING_SETUP); + } } } -- cgit v1.2.3 From 03a849e6ddb604ff6a220b78637ee8e122ffc796 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 18 Jan 2010 18:15:11 +0100 Subject: pata_cmd64x: cmd648_bmdma_stop() fix Clear the primary channel pending interrupt bit instead of the reserved one. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Jeff Garzik --- drivers/ata/pata_cmd64x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c index 0235a1d3c2f..7bc00d5fa60 100644 --- a/drivers/ata/pata_cmd64x.c +++ b/drivers/ata/pata_cmd64x.c @@ -40,7 +40,7 @@ enum { CFR = 0x50, - CFR_INTR_CH0 = 0x02, + CFR_INTR_CH0 = 0x04, CNTRL = 0x51, CNTRL_DIS_RA0 = 0x40, CNTRL_DIS_RA1 = 0x80, -- cgit v1.2.3 From c754d9b6e04371fb398cdd2f5e77be895126be20 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 18 Jan 2010 18:15:18 +0100 Subject: pata_cmd64x: remove unused definitions s/ARTIM2/ARTTIM23/ in cmd648_bmdma_stop() while at it Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Jeff Garzik --- drivers/ata/pata_cmd64x.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c index 7bc00d5fa60..b40bf0f2997 100644 --- a/drivers/ata/pata_cmd64x.c +++ b/drivers/ata/pata_cmd64x.c @@ -41,10 +41,6 @@ enum { CFR = 0x50, CFR_INTR_CH0 = 0x04, - CNTRL = 0x51, - CNTRL_DIS_RA0 = 0x40, - CNTRL_DIS_RA1 = 0x80, - CNTRL_ENA_2ND = 0x08, CMDTIM = 0x52, ARTTIM0 = 0x53, DRWTIM0 = 0x54, @@ -54,9 +50,6 @@ enum { ARTTIM23_DIS_RA2 = 0x04, ARTTIM23_DIS_RA3 = 0x08, ARTTIM23_INTR_CH1 = 0x10, - ARTTIM2 = 0x57, - ARTTIM3 = 0x57, - DRWTIM23 = 0x58, DRWTIM2 = 0x58, BRST = 0x59, DRWTIM3 = 0x5b, @@ -64,14 +57,11 @@ enum { MRDMODE = 0x71, MRDMODE_INTR_CH0 = 0x04, MRDMODE_INTR_CH1 = 0x08, - MRDMODE_BLK_CH0 = 0x10, - MRDMODE_BLK_CH1 = 0x20, BMIDESR0 = 0x72, UDIDETCR0 = 0x73, DTPR0 = 0x74, BMIDECR1 = 0x78, BMIDECSR = 0x79, - BMIDESR1 = 0x7A, UDIDETCR1 = 0x7B, DTPR1 = 0x7C }; @@ -254,7 +244,7 @@ static void cmd648_bmdma_stop(struct ata_queued_cmd *qc) struct pci_dev *pdev = to_pci_dev(ap->host->dev); u8 dma_intr; int dma_mask = ap->port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0; - int dma_reg = ap->port_no ? ARTTIM2 : CFR; + int dma_reg = ap->port_no ? ARTTIM23 : CFR; ata_bmdma_stop(qc); -- cgit v1.2.3 From 8ebf473860e8166e3d4f152a02e22b9cdddcd440 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 18 Jan 2010 18:15:38 +0100 Subject: pata_cs5535: use correct values for PIO1 and PIO2 data timings There shouldn't be any problems with it as IDE cs5535 host driver has been using those values for years and they match values given in the (publicly available) datasheet. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Jeff Garzik --- drivers/ata/pata_cs5535.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c index 71cef9a962d..c50c3a42b10 100644 --- a/drivers/ata/pata_cs5535.c +++ b/drivers/ata/pata_cs5535.c @@ -100,7 +100,7 @@ static int cs5535_cable_detect(struct ata_port *ap) static void cs5535_set_piomode(struct ata_port *ap, struct ata_device *adev) { static const u16 pio_timings[5] = { - 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 + 0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131 }; static const u16 pio_cmd_timings[5] = { 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 -- cgit v1.2.3 From 3403c24529ddfb4a47f5cfe8496370997f1b0758 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 18 Jan 2010 18:15:47 +0100 Subject: pata_cypress: fix PIO timings underclocking Timing registers should be programmed with the desired number of clocks minus one clock. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Jeff Garzik --- drivers/ata/pata_cypress.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c index 8fb040bf736..ff6c37de5a1 100644 --- a/drivers/ata/pata_cypress.c +++ b/drivers/ata/pata_cypress.c @@ -62,14 +62,16 @@ static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev) return; } - time_16 = clamp_val(t.recover, 0, 15) | (clamp_val(t.active, 0, 15) << 4); - time_8 = clamp_val(t.act8b, 0, 15) | (clamp_val(t.rec8b, 0, 15) << 4); + time_16 = clamp_val(t.recover - 1, 0, 15) | + (clamp_val(t.active - 1, 0, 15) << 4); + time_8 = clamp_val(t.act8b - 1, 0, 15) | + (clamp_val(t.rec8b - 1, 0, 15) << 4); if (adev->devno == 0) { pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr); addr &= ~0x0F; /* Mask bits */ - addr |= clamp_val(t.setup, 0, 15); + addr |= clamp_val(t.setup - 1, 0, 15); pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr); pci_write_config_byte(pdev, CY82_IDE_MASTER_IOR, time_16); @@ -79,7 +81,7 @@ static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev) pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr); addr &= ~0xF0; /* Mask bits */ - addr |= (clamp_val(t.setup, 0, 15) << 4); + addr |= (clamp_val(t.setup - 1, 0, 15) << 4); pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr); pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOR, time_16); -- cgit v1.2.3 From 73e2e3d0e9d4b5781c66eca8a901e6478c25ae7d Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 18 Jan 2010 18:16:03 +0100 Subject: pata_efar: fix secondary port support Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Jeff Garzik --- drivers/ata/pata_efar.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index b2e71e6473e..89076d58111 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -2,7 +2,7 @@ * pata_efar.c - EFAR PIIX clone controller driver * * (C) 2005 Red Hat - * (C) 2009 Bartlomiej Zolnierkiewicz + * (C) 2009-2010 Bartlomiej Zolnierkiewicz * * Some parts based on ata_piix.c by Jeff Garzik and others. * @@ -256,7 +256,7 @@ static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) .udma_mask = ATA_UDMA4, .port_ops = &efar_ops, }; - const struct ata_port_info *ppi[] = { &info, NULL }; + const struct ata_port_info *ppi[] = { &info, &info }; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, -- cgit v1.2.3 From 8490377acc0869d660185bd4a9e360363d110a21 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 18 Jan 2010 18:16:38 +0100 Subject: pata_serverworks: fix PIO setup for the second channel Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Jeff Garzik --- drivers/ata/pata_serverworks.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index beaed12d50e..9acabd2e336 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -1,6 +1,7 @@ /* * pata_serverworks.c - Serverworks PATA for new ATA layer * (C) 2005 Red Hat Inc + * (C) 2010 Bartlomiej Zolnierkiewicz * * based upon * @@ -253,7 +254,7 @@ static void serverworks_set_piomode(struct ata_port *ap, struct ata_device *adev if (serverworks_is_csb(pdev)) { pci_read_config_word(pdev, 0x4A, &csb5_pio); csb5_pio &= ~(0x0F << devbits); - pci_write_config_byte(pdev, 0x4A, csb5_pio | (pio << devbits)); + pci_write_config_word(pdev, 0x4A, csb5_pio | (pio << devbits)); } } -- cgit v1.2.3 From cfcf9ee26a5991f0786d24b4bd334b103d06268e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 18 Jan 2010 18:16:46 +0100 Subject: pata_serverworks: fix error message Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Jeff Garzik --- drivers/ata/pata_serverworks.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index 9acabd2e336..c85976720a0 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -328,7 +328,7 @@ static int serverworks_fixup_osb4(struct pci_dev *pdev) pci_dev_put(isa_dev); return 0; } - printk(KERN_WARNING "ata_serverworks: Unable to find bridge.\n"); + printk(KERN_WARNING DRV_NAME ": Unable to find bridge.\n"); return -ENODEV; } -- cgit v1.2.3 From f777582f4963413320ce5fe1d1d3651a32075c07 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 18 Jan 2010 18:17:03 +0100 Subject: pata_via: fix address setup timings underlocking Correct via_do_set_mode() documentation while at it. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Jeff Garzik --- drivers/ata/pata_via.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 0d97890af68..82e75a1f1b9 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -229,7 +229,7 @@ static int via_pre_reset(struct ata_link *link, unsigned long deadline) /** - * via_do_set_mode - set initial PIO mode data + * via_do_set_mode - set transfer mode data * @ap: ATA interface * @adev: ATA device * @mode: ATA mode being programmed @@ -273,7 +273,7 @@ static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mo pci_read_config_byte(pdev, 0x4C, &setup); setup &= ~(3 << shift); - setup |= clamp_val(t.setup, 1, 4) << shift; /* 1,4 or 1,4 - 1 FIXME */ + setup |= (clamp_val(t.setup, 1, 4) - 1) << shift; pci_write_config_byte(pdev, 0x4C, setup); } -- cgit v1.2.3 From 460f5318460a9a3b2562d8055b9fb1c60b768e1f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 18 Jan 2010 18:17:12 +0100 Subject: pata_via: store UDMA masks in via_isa_bridges table * store UDMA masks in via_isa_bridges[] and while at it make "flags" field to be u8 instead of u16 * convert the driver to use UDMA masks from via_isa_bridges[] * remove no longer needed VIA_UDMA* defines Make some minor documentation and CodingStyle fixes while at it. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Jeff Garzik --- drivers/ata/pata_via.c | 204 +++++++++++++++++++++++-------------------------- 1 file changed, 94 insertions(+), 110 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 82e75a1f1b9..6356377231f 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -22,6 +22,7 @@ * VIA VT8233c - UDMA100 * VIA VT8235 - UDMA133 * VIA VT8237 - UDMA133 + * VIA VT8237A - UDMA133 * VIA VT8237S - UDMA133 * VIA VT8251 - UDMA133 * @@ -64,26 +65,15 @@ #define DRV_NAME "pata_via" #define DRV_VERSION "0.3.4" -/* - * The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx - * driver. - */ - enum { - VIA_UDMA = 0x007, - VIA_UDMA_NONE = 0x000, - VIA_UDMA_33 = 0x001, - VIA_UDMA_66 = 0x002, - VIA_UDMA_100 = 0x003, - VIA_UDMA_133 = 0x004, - VIA_BAD_PREQ = 0x010, /* Crashes if PREQ# till DDACK# set */ - VIA_BAD_CLK66 = 0x020, /* 66 MHz clock doesn't work correctly */ - VIA_SET_FIFO = 0x040, /* Needs to have FIFO split set */ - VIA_NO_UNMASK = 0x080, /* Doesn't work with IRQ unmasking on */ - VIA_BAD_ID = 0x100, /* Has wrong vendor ID (0x1107) */ - VIA_BAD_AST = 0x200, /* Don't touch Address Setup Timing */ - VIA_NO_ENABLES = 0x400, /* Has no enablebits */ - VIA_SATA_PATA = 0x800, /* SATA/PATA combined configuration */ + VIA_BAD_PREQ = 0x01, /* Crashes if PREQ# till DDACK# set */ + VIA_BAD_CLK66 = 0x02, /* 66 MHz clock doesn't work correctly */ + VIA_SET_FIFO = 0x04, /* Needs to have FIFO split set */ + VIA_NO_UNMASK = 0x08, /* Doesn't work with IRQ unmasking on */ + VIA_BAD_ID = 0x10, /* Has wrong vendor ID (0x1107) */ + VIA_BAD_AST = 0x20, /* Don't touch Address Setup Timing */ + VIA_NO_ENABLES = 0x40, /* Has no enablebits */ + VIA_SATA_PATA = 0x80, /* SATA/PATA combined configuration */ }; enum { @@ -99,40 +89,37 @@ static const struct via_isa_bridge { u16 id; u8 rev_min; u8 rev_max; - u16 flags; + u8 udma_mask; + u8 flags; } via_isa_bridges[] = { - { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, - VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, - { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, VIA_UDMA_133 | - VIA_BAD_AST | VIA_SATA_PATA }, - { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f, - VIA_UDMA_133 | VIA_BAD_AST }, - { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, - { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, - { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, - { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES }, - { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0xff, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES }, - { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, - { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, - { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, - { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, - { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, VIA_UDMA_100 }, - { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, VIA_UDMA_100 }, - { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, VIA_UDMA_100 }, - { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, VIA_UDMA_100 }, - { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, VIA_UDMA_66 }, - { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 }, - { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, VIA_UDMA_66 }, - { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 }, - { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, VIA_UDMA_33 | VIA_SET_FIFO }, - { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, VIA_UDMA_33 | VIA_SET_FIFO | VIA_BAD_PREQ }, - { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, VIA_UDMA_33 | VIA_SET_FIFO }, - { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, VIA_UDMA_33 | VIA_SET_FIFO }, - { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO }, - { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK }, - { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, - { "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f, - VIA_UDMA_133 | VIA_BAD_AST }, + { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA }, + { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA }, + { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA }, + { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_NO_ENABLES }, + { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0xff, ATA_UDMA6, VIA_BAD_AST | VIA_NO_ENABLES }, + { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, ATA_UDMA5, }, + { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, ATA_UDMA5, }, + { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, ATA_UDMA5, }, + { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, ATA_UDMA5, }, + { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, ATA_UDMA4, }, + { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 }, + { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, ATA_UDMA4, }, + { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 }, + { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, ATA_UDMA2, VIA_SET_FIFO }, + { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, ATA_UDMA2, VIA_SET_FIFO | VIA_BAD_PREQ }, + { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, ATA_UDMA2, VIA_SET_FIFO }, + { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, ATA_UDMA2, VIA_SET_FIFO }, + { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, 0x00, VIA_SET_FIFO }, + { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK }, + { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, + { "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { NULL } }; @@ -191,10 +178,10 @@ static int via_cable_detect(struct ata_port *ap) { return ATA_CBL_SATA; /* Early chips are 40 wire */ - if ((config->flags & VIA_UDMA) < VIA_UDMA_66) + if (config->udma_mask < ATA_UDMA4) return ATA_CBL_PATA40; /* UDMA 66 chips have only drive side logic */ - else if ((config->flags & VIA_UDMA) < VIA_UDMA_100) + else if (config->udma_mask < ATA_UDMA5) return ATA_CBL_PATA_UNK; /* UDMA 100 or later */ pci_read_config_dword(pdev, 0x50, &ata66); @@ -233,7 +220,6 @@ static int via_pre_reset(struct ata_link *link, unsigned long deadline) * @ap: ATA interface * @adev: ATA device * @mode: ATA mode being programmed - * @tdiv: Clocks per PCI clock * @set_ast: Set to program address setup * @udma_type: UDMA mode/format of registers * @@ -244,17 +230,27 @@ static int via_pre_reset(struct ata_link *link, unsigned long deadline) * on the two channels. */ -static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mode, int tdiv, int set_ast, int udma_type) +static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, + int mode, int set_ast, int udma_type) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); struct ata_device *peer = ata_dev_pair(adev); struct ata_timing t, p; - static int via_clock = 33333; /* Bus clock in kHZ - ought to be tunable one day */ + static int via_clock = 33333; /* Bus clock in kHZ */ unsigned long T = 1000000000 / via_clock; - unsigned long UT = T/tdiv; + unsigned long UT = T; int ut; int offset = 3 - (2*ap->port_no) - adev->devno; + switch (udma_type) { + case ATA_UDMA4: + UT = T / 2; break; + case ATA_UDMA5: + UT = T / 3; break; + case ATA_UDMA6: + UT = T / 4; break; + } + /* Calculate the timing values we require */ ata_timing_compute(adev, mode, &t, T, UT); @@ -284,22 +280,20 @@ static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mo ((clamp_val(t.active, 1, 16) - 1) << 4) | (clamp_val(t.recover, 1, 16) - 1)); /* Load the UDMA bits according to type */ - switch(udma_type) { - default: - /* BUG() ? */ - /* fall through */ - case 33: - ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 5) - 2)) : 0x03; - break; - case 66: - ut = t.udma ? (0xe8 | (clamp_val(t.udma, 2, 9) - 2)) : 0x0f; - break; - case 100: - ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07; - break; - case 133: - ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07; - break; + switch (udma_type) { + case ATA_UDMA2: + default: + ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 5) - 2)) : 0x03; + break; + case ATA_UDMA4: + ut = t.udma ? (0xe8 | (clamp_val(t.udma, 2, 9) - 2)) : 0x0f; + break; + case ATA_UDMA5: + ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07; + break; + case ATA_UDMA6: + ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07; + break; } /* Set UDMA unless device is not UDMA capable */ @@ -325,22 +319,16 @@ static void via_set_piomode(struct ata_port *ap, struct ata_device *adev) { const struct via_isa_bridge *config = ap->host->private_data; int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1; - int mode = config->flags & VIA_UDMA; - static u8 tclock[5] = { 1, 1, 2, 3, 4 }; - static u8 udma[5] = { 0, 33, 66, 100, 133 }; - via_do_set_mode(ap, adev, adev->pio_mode, tclock[mode], set_ast, udma[mode]); + via_do_set_mode(ap, adev, adev->pio_mode, set_ast, config->udma_mask); } static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev) { const struct via_isa_bridge *config = ap->host->private_data; int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1; - int mode = config->flags & VIA_UDMA; - static u8 tclock[5] = { 1, 1, 2, 3, 4 }; - static u8 udma[5] = { 0, 33, 66, 100, 133 }; - via_do_set_mode(ap, adev, adev->dma_mode, tclock[mode], set_ast, udma[mode]); + via_do_set_mode(ap, adev, adev->dma_mode, set_ast, config->udma_mask); } /** @@ -604,33 +592,29 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) via_config_fifo(pdev, config->flags); /* Clock set up */ - switch(config->flags & VIA_UDMA) { - case VIA_UDMA_NONE: - if (config->flags & VIA_NO_UNMASK) - ppi[0] = &via_mwdma_info_borked; - else - ppi[0] = &via_mwdma_info; - break; - case VIA_UDMA_33: - ppi[0] = &via_udma33_info; - break; - case VIA_UDMA_66: - ppi[0] = &via_udma66_info; - /* The 66 MHz devices require we enable the clock */ - pci_read_config_dword(pdev, 0x50, &timing); - timing |= 0x80008; - pci_write_config_dword(pdev, 0x50, timing); - break; - case VIA_UDMA_100: - ppi[0] = &via_udma100_info; - break; - case VIA_UDMA_133: - ppi[0] = &via_udma133_info; - break; - default: - WARN_ON(1); - return -ENODEV; - } + switch (config->udma_mask) { + case 0x00: + if (config->flags & VIA_NO_UNMASK) + ppi[0] = &via_mwdma_info_borked; + else + ppi[0] = &via_mwdma_info; + break; + case ATA_UDMA2: + ppi[0] = &via_udma33_info; + break; + case ATA_UDMA4: + ppi[0] = &via_udma66_info; + break; + case ATA_UDMA5: + ppi[0] = &via_udma100_info; + break; + case ATA_UDMA6: + ppi[0] = &via_udma133_info; + break; + default: + WARN_ON(1); + return -ENODEV; + } if (config->flags & VIA_BAD_CLK66) { /* Disable the 66MHz clock on problem devices */ @@ -667,7 +651,7 @@ static int via_reinit_one(struct pci_dev *pdev) via_config_fifo(pdev, config->flags); - if ((config->flags & VIA_UDMA) == VIA_UDMA_66) { + if (config->udma_mask == ATA_UDMA4) { /* The 66 MHz devices require we enable the clock */ pci_read_config_dword(pdev, 0x50, &timing); timing |= 0x80008; -- cgit v1.2.3 From 429e3861f9d5682c5bc5f237345f8962daf51bbc Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 4 Feb 2010 01:09:54 -0500 Subject: [libata] pata_at91: fix backslash-continued string Noticed and rough patch by Joe Perches. Signed-off-by: Jeff Garzik --- drivers/ata/pata_at91.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c index 41c94b1ae49..376dd380b43 100644 --- a/drivers/ata/pata_at91.c +++ b/drivers/ata/pata_at91.c @@ -153,8 +153,8 @@ static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev) /* Compute ATA timing and set it to SMC */ ret = ata_timing_compute(adev, adev->pio_mode, &timing, 1000, 0); if (ret) { - dev_warn(ap->dev, "Failed to compute ATA timing %d, \ - set PIO_0 timing\n", ret); + dev_warn(ap->dev, "Failed to compute ATA timing %d, " + "set PIO_0 timing\n", ret); set_smc_timing(ap->dev, info, &initial_timing); } else { set_smc_timing(ap->dev, info, &timing); -- cgit v1.2.3 From a75032e8772d13dab5e3501413d7e14a148281b4 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 13 Feb 2010 14:35:53 +0100 Subject: pata_pdc202xx_old: fix UDMA mode for Promise UDMA33 cards On Monday 04 January 2010 02:30:24 pm Russell King wrote: > Found the problem - getting rid of the read of the alt status register > after the command has been written fixes the UDMA CRC errors on write: > > @@ -676,7 +676,8 @@ void ata_sff_exec_command(struct ata_port *ap, const struct > ata_taskfile *tf) > DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); > > iowrite8(tf->command, ap->ioaddr.command_addr); > - ata_sff_pause(ap); > + ndelay(400); > +// ata_sff_pause(ap); > } > EXPORT_SYMBOL_GPL(ata_sff_exec_command); > > > This rather makes sense. The PDC20247 handles the UDMA part of the > protocol. It has no way to tell the PDC20246 to wait while it suspends > UDMA, so that a normal register access can take place - the 246 ploughs > on with the register access without any regard to the state of the 247. > > If the drive immediately starts the UDMA protocol after a write to the > command register (as it probably will for the DMA WRITE command), then > we'll be accessing the taskfile in the middle of the UDMA setup, which > can't be good. It's certainly a violation of the ATA specs. Fix it by adding custom ->sff_exec_command method for UDMA33 chipsets. Debugged-by: Russell King Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Jeff Garzik --- drivers/ata/pata_pdc202xx_old.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index 2f3c9bed63d..8d25bd59a16 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -2,7 +2,7 @@ * pata_pdc202xx_old.c - Promise PDC202xx PATA for new ATA layer * (C) 2005 Red Hat Inc * Alan Cox - * (C) 2007,2009 Bartlomiej Zolnierkiewicz + * (C) 2007,2009,2010 Bartlomiej Zolnierkiewicz * * Based in part on linux/drivers/ide/pci/pdc202xx_old.c * @@ -35,6 +35,15 @@ static int pdc2026x_cable_detect(struct ata_port *ap) return ATA_CBL_PATA80; } +static void pdc20246_exec_command(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); + + iowrite8(tf->command, ap->ioaddr.command_addr); + ndelay(400); +} + /** * pdc202xx_configure_piomode - set chip PIO timing * @ap: ATA interface @@ -271,6 +280,8 @@ static struct ata_port_operations pdc2024x_port_ops = { .cable_detect = ata_cable_40wire, .set_piomode = pdc202xx_set_piomode, .set_dmamode = pdc202xx_set_dmamode, + + .sff_exec_command = pdc20246_exec_command, }; static struct ata_port_operations pdc2026x_port_ops = { -- cgit v1.2.3 From 750e519da7b3f470fe1b5b55c8d8f52d6d6371e4 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 13 Feb 2010 17:43:17 -0500 Subject: pata_pdc202xx_old: fix UDMA mode for PDC2026x chipsets PDC2026x chipsets need the same treatment as PDC20246 one. This is completely untested but will hopefully fix UDMA issues that people have been reporting against pata_pdc202xx_old for the last couple of years. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Jeff Garzik --- drivers/ata/pata_pdc202xx_old.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index 8d25bd59a16..29111205185 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -35,7 +35,7 @@ static int pdc2026x_cable_detect(struct ata_port *ap) return ATA_CBL_PATA80; } -static void pdc20246_exec_command(struct ata_port *ap, +static void pdc202xx_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) { DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); @@ -281,7 +281,7 @@ static struct ata_port_operations pdc2024x_port_ops = { .set_piomode = pdc202xx_set_piomode, .set_dmamode = pdc202xx_set_dmamode, - .sff_exec_command = pdc20246_exec_command, + .sff_exec_command = pdc202xx_exec_command, }; static struct ata_port_operations pdc2026x_port_ops = { @@ -295,6 +295,8 @@ static struct ata_port_operations pdc2026x_port_ops = { .dev_config = pdc2026x_dev_config, .port_start = pdc2026x_port_start, + + .sff_exec_command = pdc202xx_exec_command, }; static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id) -- cgit v1.2.3 From 96780078f35648050fef808f49a0ffff0360bb57 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 8 Feb 2010 10:04:54 +0000 Subject: libata: Allow pata_legacy to be built on non-ISA but PCI systems This is needed for some unsupported hardware setups on strange 64bit mainboards where crazy stuff has been done like putting flash ata adapters on the LPC bus, or where the real hardware is hidden/confused. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 56c6374a398..01c52c415bd 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -446,9 +446,9 @@ config PATA_JMICRON config PATA_LEGACY tristate "Legacy ISA PATA support (Experimental)" - depends on ISA && EXPERIMENTAL + depends on (ISA || PCI) && EXPERIMENTAL help - This option enables support for ISA/VLB bus legacy PATA + This option enables support for ISA/VLB/PCI bus legacy PATA ports and allows them to be accessed via the new ATA layer. If unsure, say N. -- cgit v1.2.3 From cb6643e1c38b6bd5c1594f0a45d8cf6943a6f934 Mon Sep 17 00:00:00 2001 From: Christoph Egger Date: Fri, 5 Feb 2010 16:26:35 +0100 Subject: [libata] pata_marvell: CONFIG_AHCI is really CONFIG_SATA_AHCI The marvell driver comtains a fallback to ahci for the sata ports which is incorrectly checked as CONFIG_AHCI while the only AHCI config item is actually called SATA_AHCI (which also sounds sensible considering it's a fallback for the sata ports). Signed-off-by: Christoph Egger Signed-off-by: Jeff Garzik --- drivers/ata/pata_marvell.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c index 950da39cae3..b351d81813f 100644 --- a/drivers/ata/pata_marvell.c +++ b/drivers/ata/pata_marvell.c @@ -147,7 +147,7 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i if (pdev->device == 0x6101) ppi[1] = &ata_dummy_port_info; -#if defined(CONFIG_AHCI) || defined(CONFIG_AHCI_MODULE) +#if defined(CONFIG_SATA_AHCI) || defined(CONFIG_SATA_AHCI_MODULE) if (!marvell_pata_active(pdev)) { printk(KERN_INFO DRV_NAME ": PATA port not active, deferring to AHCI driver.\n"); return -ENODEV; -- cgit v1.2.3 From 16ea0fc98d53c72cb4e1a9edcb685a87e3a81430 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 23 Feb 2010 02:26:06 -0500 Subject: libata: Pass host flags into the pci helper This allows parallel scan and the like to be set without having to stop using the existing full helper functions. This patch merely adds the argument and fixes up the callers. It doesn't undo the special cases already in the tree or add any new parallel callers. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/ata_generic.c | 2 +- drivers/ata/libata-sff.c | 6 ++++-- drivers/ata/pata_acpi.c | 2 +- drivers/ata/pata_ali.c | 2 +- drivers/ata/pata_amd.c | 2 +- drivers/ata/pata_artop.c | 2 +- drivers/ata/pata_atiixp.c | 2 +- drivers/ata/pata_cmd640.c | 2 +- drivers/ata/pata_cmd64x.c | 2 +- drivers/ata/pata_cs5530.c | 2 +- drivers/ata/pata_cs5535.c | 2 +- drivers/ata/pata_cs5536.c | 2 +- drivers/ata/pata_cypress.c | 2 +- drivers/ata/pata_efar.c | 2 +- drivers/ata/pata_hpt366.c | 2 +- drivers/ata/pata_hpt37x.c | 2 +- drivers/ata/pata_hpt3x2n.c | 2 +- drivers/ata/pata_it8213.c | 2 +- drivers/ata/pata_it821x.c | 2 +- drivers/ata/pata_jmicron.c | 2 +- drivers/ata/pata_marvell.c | 2 +- drivers/ata/pata_netcell.c | 2 +- drivers/ata/pata_ns87410.c | 2 +- drivers/ata/pata_ns87415.c | 2 +- drivers/ata/pata_oldpiix.c | 2 +- drivers/ata/pata_opti.c | 2 +- drivers/ata/pata_optidma.c | 2 +- drivers/ata/pata_pdc202xx_old.c | 2 +- drivers/ata/pata_piccolo.c | 2 +- drivers/ata/pata_radisys.c | 2 +- drivers/ata/pata_rz1000.c | 2 +- drivers/ata/pata_sc1200.c | 2 +- drivers/ata/pata_serverworks.c | 2 +- drivers/ata/pata_sil680.c | 2 +- drivers/ata/pata_sis.c | 2 +- drivers/ata/pata_sl82c105.c | 2 +- drivers/ata/pata_triflex.c | 2 +- drivers/ata/pata_via.c | 2 +- drivers/staging/phison/phison.c | 2 +- 39 files changed, 42 insertions(+), 40 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index 12e26c3c68e..33fb614f978 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -155,7 +155,7 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id return rc; pcim_pin_device(dev); } - return ata_pci_sff_init_one(dev, ppi, &generic_sht, NULL); + return ata_pci_sff_init_one(dev, ppi, &generic_sht, NULL, 0); } static struct pci_device_id ata_generic[] = { diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index c2661ea7033..02441fd57e9 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -3037,6 +3037,7 @@ EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host); * @ppi: array of port_info, must be enough for two ports * @sht: scsi_host_template to use when registering the host * @host_priv: host private_data + * @hflag: host flags * * This is a helper function which can be called from a driver's * xxx_init_one() probe function if the hardware uses traditional @@ -3057,8 +3058,8 @@ EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host); * Zero on success, negative on errno-based value on error. */ int ata_pci_sff_init_one(struct pci_dev *pdev, - const struct ata_port_info * const *ppi, - struct scsi_host_template *sht, void *host_priv) + const struct ata_port_info * const *ppi, + struct scsi_host_template *sht, void *host_priv, int hflag) { struct device *dev = &pdev->dev; const struct ata_port_info *pi = NULL; @@ -3093,6 +3094,7 @@ int ata_pci_sff_init_one(struct pci_dev *pdev, if (rc) goto out; host->private_data = host_priv; + host->flags |= hflag; pci_set_master(pdev); rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht); diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c index d8f35fe4442..294f3020a78 100644 --- a/drivers/ata/pata_acpi.c +++ b/drivers/ata/pata_acpi.c @@ -259,7 +259,7 @@ static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id) return rc; pcim_pin_device(pdev); } - return ata_pci_sff_init_one(pdev, ppi, &pacpi_sht, NULL); + return ata_pci_sff_init_one(pdev, ppi, &pacpi_sht, NULL, 0); } static const struct pci_device_id pacpi_pci_tbl[] = { diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index 63ba48c9af3..dc61b72f751 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -583,7 +583,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) ppi[0] = &info_20_udma; } - return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL); + return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL, 0); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 567f3f72774..d95eca9c547 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -574,7 +574,7 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) } /* And fire it up */ - return ata_pci_sff_init_one(pdev, ppi, &amd_sht, hpriv); + return ata_pci_sff_init_one(pdev, ppi, &amd_sht, hpriv, 0); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c index d332cfdb0f3..4d066d6c30f 100644 --- a/drivers/ata/pata_artop.c +++ b/drivers/ata/pata_artop.c @@ -421,7 +421,7 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id) BUG_ON(ppi[0] == NULL); - return ata_pci_sff_init_one(pdev, ppi, &artop_sht, NULL); + return ata_pci_sff_init_one(pdev, ppi, &artop_sht, NULL, 0); } static const struct pci_device_id artop_pci_tbl[] = { diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index ae4454d4e95..f697b5b880d 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -237,7 +237,7 @@ static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id) if (!pci_test_config_bits(pdev, &atiixp_enable_bits[i])) ppi[i] = &ata_dummy_port_info; - return ata_pci_sff_init_one(pdev, ppi, &atiixp_sht, NULL); + return ata_pci_sff_init_one(pdev, ppi, &atiixp_sht, NULL, 0); } static const struct pci_device_id atiixp[] = { diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c index 5acf9fa9b39..6cd5d5dd9e3 100644 --- a/drivers/ata/pata_cmd640.c +++ b/drivers/ata/pata_cmd640.c @@ -223,7 +223,7 @@ static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id) cmd640_hardware_init(pdev); - return ata_pci_sff_init_one(pdev, ppi, &cmd640_sht, NULL); + return ata_pci_sff_init_one(pdev, ppi, &cmd640_sht, NULL, 0); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c index b40bf0f2997..4c81a71b887 100644 --- a/drivers/ata/pata_cmd64x.c +++ b/drivers/ata/pata_cmd64x.c @@ -367,7 +367,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) pci_write_config_byte(pdev, UDIDETCR0, 0xF0); #endif - return ata_pci_sff_init_one(pdev, ppi, &cmd64x_sht, NULL); + return ata_pci_sff_init_one(pdev, ppi, &cmd64x_sht, NULL, 0); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c index c974b05e412..738ad2e14a9 100644 --- a/drivers/ata/pata_cs5530.c +++ b/drivers/ata/pata_cs5530.c @@ -324,7 +324,7 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id) ppi[1] = &info_palmax_secondary; /* Now kick off ATA set up */ - return ata_pci_sff_init_one(pdev, ppi, &cs5530_sht, NULL); + return ata_pci_sff_init_one(pdev, ppi, &cs5530_sht, NULL, 0); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c index c50c3a42b10..a02e6459fdc 100644 --- a/drivers/ata/pata_cs5535.c +++ b/drivers/ata/pata_cs5535.c @@ -198,7 +198,7 @@ static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id) rdmsr(ATAC_CH0D1_PIO, timings, dummy); if (CS5535_BAD_PIO(timings)) wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0); - return ata_pci_sff_init_one(dev, ppi, &cs5535_sht, NULL); + return ata_pci_sff_init_one(dev, ppi, &cs5535_sht, NULL, 0); } static const struct pci_device_id cs5535[] = { diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c index ffee3978ec8..914ae3506ff 100644 --- a/drivers/ata/pata_cs5536.c +++ b/drivers/ata/pata_cs5536.c @@ -260,7 +260,7 @@ static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id) return -ENODEV; } - return ata_pci_sff_init_one(dev, ppi, &cs5536_sht, NULL); + return ata_pci_sff_init_one(dev, ppi, &cs5536_sht, NULL, 0); } static const struct pci_device_id cs5536[] = { diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c index ff6c37de5a1..0fcc096b8da 100644 --- a/drivers/ata/pata_cypress.c +++ b/drivers/ata/pata_cypress.c @@ -138,7 +138,7 @@ static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *i if (PCI_FUNC(pdev->devfn) != 1) return -ENODEV; - return ata_pci_sff_init_one(pdev, ppi, &cy82c693_sht, NULL); + return ata_pci_sff_init_one(pdev, ppi, &cy82c693_sht, NULL, 0); } static const struct pci_device_id cy82c693[] = { diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index 89076d58111..5556163c80d 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -262,7 +262,7 @@ static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - return ata_pci_sff_init_one(pdev, ppi, &efar_sht, NULL); + return ata_pci_sff_init_one(pdev, ppi, &efar_sht, NULL, 0); } static const struct pci_device_id efar_pci_tbl[] = { diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index 3ec88f2c866..af49bfb5724 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -361,7 +361,7 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) break; } /* Now kick off ATA set up */ - return ata_pci_sff_init_one(dev, ppi, &hpt36x_sht, hpriv); + return ata_pci_sff_init_one(dev, ppi, &hpt36x_sht, hpriv, 0); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 228dc1a8992..8839307a64c 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -987,7 +987,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) } /* Now kick off ATA set up */ - return ata_pci_sff_init_one(dev, ppi, &hpt37x_sht, private_data); + return ata_pci_sff_init_one(dev, ppi, &hpt37x_sht, private_data, 0); } static const struct pci_device_id hpt37x[] = { diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index 4a291221f27..01457b266f3 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -548,7 +548,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) outb(inb(iobase + 0x9c) | 0x04, iobase + 0x9c); /* Now kick off ATA set up */ - return ata_pci_sff_init_one(dev, ppi, &hpt3x2n_sht, hpriv); + return ata_pci_sff_init_one(dev, ppi, &hpt3x2n_sht, hpriv, 0); } static const struct pci_device_id hpt3x2n[] = { diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c index 8f3325adceb..f971f0de88e 100644 --- a/drivers/ata/pata_it8213.c +++ b/drivers/ata/pata_it8213.c @@ -273,7 +273,7 @@ static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *en dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - return ata_pci_sff_init_one(pdev, ppi, &it8213_sht, NULL); + return ata_pci_sff_init_one(pdev, ppi, &it8213_sht, NULL, 0); } static const struct pci_device_id it8213_pci_tbl[] = { diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index edc5c1fed15..9bde1cb5f98 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -932,7 +932,7 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) else ppi[0] = &info_smart; } - return ata_pci_sff_init_one(pdev, ppi, &it821x_sht, NULL); + return ata_pci_sff_init_one(pdev, ppi, &it821x_sht, NULL, 0); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c index 3a1474ac883..565e01e6ac7 100644 --- a/drivers/ata/pata_jmicron.c +++ b/drivers/ata/pata_jmicron.c @@ -144,7 +144,7 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i }; const struct ata_port_info *ppi[] = { &info, NULL }; - return ata_pci_sff_init_one(pdev, ppi, &jmicron_sht, NULL); + return ata_pci_sff_init_one(pdev, ppi, &jmicron_sht, NULL, 0); } static const struct pci_device_id jmicron_pci_tbl[] = { diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c index b351d81813f..e8ca02e5a71 100644 --- a/drivers/ata/pata_marvell.c +++ b/drivers/ata/pata_marvell.c @@ -153,7 +153,7 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i return -ENODEV; } #endif - return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL); + return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL, 0); } static const struct pci_device_id marvell_pci_tbl[] = { diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c index f0d52f72f5b..94f979a7f4f 100644 --- a/drivers/ata/pata_netcell.c +++ b/drivers/ata/pata_netcell.c @@ -82,7 +82,7 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e ata_pci_bmdma_clear_simplex(pdev); /* And let the library code do the work */ - return ata_pci_sff_init_one(pdev, port_info, &netcell_sht, NULL); + return ata_pci_sff_init_one(pdev, port_info, &netcell_sht, NULL, 0); } static const struct pci_device_id netcell_pci_tbl[] = { diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c index ca53fac0671..2110863bb3d 100644 --- a/drivers/ata/pata_ns87410.c +++ b/drivers/ata/pata_ns87410.c @@ -148,7 +148,7 @@ static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id) .port_ops = &ns87410_port_ops }; const struct ata_port_info *ppi[] = { &info, NULL }; - return ata_pci_sff_init_one(dev, ppi, &ns87410_sht, NULL); + return ata_pci_sff_init_one(dev, ppi, &ns87410_sht, NULL, 0); } static const struct pci_device_id ns87410[] = { diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c index 061aa1c41a4..830431f036a 100644 --- a/drivers/ata/pata_ns87415.c +++ b/drivers/ata/pata_ns87415.c @@ -380,7 +380,7 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e ns87415_fixup(pdev); - return ata_pci_sff_init_one(pdev, ppi, &ns87415_sht, NULL); + return ata_pci_sff_init_one(pdev, ppi, &ns87415_sht, NULL, 0); } static const struct pci_device_id ns87415_pci_tbl[] = { diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c index 9a8687db6b2..5f6aba7eb0d 100644 --- a/drivers/ata/pata_oldpiix.c +++ b/drivers/ata/pata_oldpiix.c @@ -248,7 +248,7 @@ static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *e dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - return ata_pci_sff_init_one(pdev, ppi, &oldpiix_sht, NULL); + return ata_pci_sff_init_one(pdev, ppi, &oldpiix_sht, NULL, 0); } static const struct pci_device_id oldpiix_pci_tbl[] = { diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c index 99eddda2d2e..00c5a02a94f 100644 --- a/drivers/ata/pata_opti.c +++ b/drivers/ata/pata_opti.c @@ -172,7 +172,7 @@ static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id) if (!printed_version++) dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n"); - return ata_pci_sff_init_one(dev, ppi, &opti_sht, NULL); + return ata_pci_sff_init_one(dev, ppi, &opti_sht, NULL, 0); } static const struct pci_device_id opti[] = { diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c index 86885a445f9..76b7d12b1e8 100644 --- a/drivers/ata/pata_optidma.c +++ b/drivers/ata/pata_optidma.c @@ -429,7 +429,7 @@ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id) if (optiplus_with_udma(dev)) ppi[0] = &info_82c700_udma; - return ata_pci_sff_init_one(dev, ppi, &optidma_sht, NULL); + return ata_pci_sff_init_one(dev, ppi, &optidma_sht, NULL, 0); } static const struct pci_device_id optidma[] = { diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index 29111205185..9ac0897cf8b 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -337,7 +337,7 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id return -ENODEV; } } - return ata_pci_sff_init_one(dev, ppi, &pdc202xx_sht, NULL); + return ata_pci_sff_init_one(dev, ppi, &pdc202xx_sht, NULL, 0); } static const struct pci_device_id pdc202xx[] = { diff --git a/drivers/ata/pata_piccolo.c b/drivers/ata/pata_piccolo.c index bfe0180f3ef..98161541484 100644 --- a/drivers/ata/pata_piccolo.c +++ b/drivers/ata/pata_piccolo.c @@ -95,7 +95,7 @@ static int ata_tosh_init_one(struct pci_dev *dev, const struct pci_device_id *id }; const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; /* Just one port for the moment */ - return ata_pci_sff_init_one(dev, ppi, &tosh_sht, NULL); + return ata_pci_sff_init_one(dev, ppi, &tosh_sht, NULL, 0); } static struct pci_device_id ata_tosh[] = { diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c index 4fd25e737d9..fc9602229ac 100644 --- a/drivers/ata/pata_radisys.c +++ b/drivers/ata/pata_radisys.c @@ -227,7 +227,7 @@ static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *e dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - return ata_pci_sff_init_one(pdev, ppi, &radisys_sht, NULL); + return ata_pci_sff_init_one(pdev, ppi, &radisys_sht, NULL, 0); } static const struct pci_device_id radisys_pci_tbl[] = { diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c index 2932998fc4c..4a454a88aa9 100644 --- a/drivers/ata/pata_rz1000.c +++ b/drivers/ata/pata_rz1000.c @@ -95,7 +95,7 @@ static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *en printk_once(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); if (rz1000_fifo_disable(pdev) == 0) - return ata_pci_sff_init_one(pdev, ppi, &rz1000_sht, NULL); + return ata_pci_sff_init_one(pdev, ppi, &rz1000_sht, NULL, 0); printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n"); /* Not safe to use so skip */ diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c index 3bbed8322ec..dfecc6f964b 100644 --- a/drivers/ata/pata_sc1200.c +++ b/drivers/ata/pata_sc1200.c @@ -237,7 +237,7 @@ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) }; const struct ata_port_info *ppi[] = { &info, NULL }; - return ata_pci_sff_init_one(dev, ppi, &sc1200_sht, NULL); + return ata_pci_sff_init_one(dev, ppi, &sc1200_sht, NULL, 0); } static const struct pci_device_id sc1200[] = { diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index c85976720a0..9524d54035f 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -460,7 +460,7 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) ata_pci_bmdma_clear_simplex(pdev); - return ata_pci_sff_init_one(pdev, ppi, &serverworks_sht, NULL); + return ata_pci_sff_init_one(pdev, ppi, &serverworks_sht, NULL, 0); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index a2ace48a461..c6c589c23ff 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -356,7 +356,7 @@ static int __devinit sil680_init_one(struct pci_dev *pdev, IRQF_SHARED, &sil680_sht); use_ioports: - return ata_pci_sff_init_one(pdev, ppi, &sil680_sht, NULL); + return ata_pci_sff_init_one(pdev, ppi, &sil680_sht, NULL, 0); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 5c30d56dec8..b6708032f32 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -826,7 +826,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) sis_fixup(pdev, chipset); - return ata_pci_sff_init_one(pdev, ppi, &sis_sht, chipset); + return ata_pci_sff_init_one(pdev, ppi, &sis_sht, chipset, 0); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c index 29f733c3206..733b042a746 100644 --- a/drivers/ata/pata_sl82c105.c +++ b/drivers/ata/pata_sl82c105.c @@ -316,7 +316,7 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16; pci_write_config_dword(dev, 0x40, val); - return ata_pci_sff_init_one(dev, ppi, &sl82c105_sht, NULL); + return ata_pci_sff_init_one(dev, ppi, &sl82c105_sht, NULL, 0); } static const struct pci_device_id sl82c105[] = { diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c index f1f13ff222f..48f50600ed2 100644 --- a/drivers/ata/pata_triflex.c +++ b/drivers/ata/pata_triflex.c @@ -201,7 +201,7 @@ static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id) if (!printed_version++) dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n"); - return ata_pci_sff_init_one(dev, ppi, &triflex_sht, NULL); + return ata_pci_sff_init_one(dev, ppi, &triflex_sht, NULL, 0); } static const struct pci_device_id triflex[] = { diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 6356377231f..3059ec017de 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -624,7 +624,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) } /* We have established the device type, now fire it up */ - return ata_pci_sff_init_one(pdev, ppi, &via_sht, (void *)config); + return ata_pci_sff_init_one(pdev, ppi, &via_sht, (void *)config, 0); } #ifdef CONFIG_PM diff --git a/drivers/staging/phison/phison.c b/drivers/staging/phison/phison.c index 3817d749704..fcba78d2163 100644 --- a/drivers/staging/phison/phison.c +++ b/drivers/staging/phison/phison.c @@ -62,7 +62,7 @@ static int phison_init_one(struct pci_dev *pdev, const struct pci_device_id *id) }; const struct ata_port_info *ppi[] = { &info, NULL }; - ret = ata_pci_sff_init_one(pdev, ppi, &phison_sht, NULL); + ret = ata_pci_sff_init_one(pdev, ppi, &phison_sht, NULL, 0); dev_dbg(&pdev->dev, "phison_init_one(), ret = %x\n", ret); -- cgit v1.2.3 From 303f1a76ae792885af8a4a0e784e22e31e850e9a Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 17 Feb 2010 13:16:58 +0000 Subject: [libata] pata_efar: add locking for parallel scanning Add clearing of UDMA enable bit also for PIO modes and then add extra locking for parallel scanning. This is similar change as commit 60c3be3 for ata_piix host driver and while pata_efar doesn't enable parallel scan yet the race could probably also be triggered by requesting re-scanning of both ports at the same time using SCSI sysfs interface. [Ported to current kernel without other patch dependancies by Alan Cox] Original is Signed-off-by: Bartlomiej Zolnierkiewicz This one is Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_efar.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index 5556163c80d..1617421f7e7 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -68,6 +68,8 @@ static int efar_cable_detect(struct ata_port *ap) return ATA_CBL_PATA80; } +static DEFINE_SPINLOCK(efar_lock); + /** * efar_set_piomode - Initialize host controller PATA PIO timings * @ap: Port whose timings we are configuring @@ -84,7 +86,9 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev) unsigned int pio = adev->pio_mode - XFER_PIO_0; struct pci_dev *dev = to_pci_dev(ap->host->dev); unsigned int idetm_port= ap->port_no ? 0x42 : 0x40; + unsigned long flags; u16 idetm_data; + u8 udma_enable; int control = 0; /* @@ -107,6 +111,8 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev) if (adev->class == ATA_DEV_ATA) control |= 4; /* PPE */ + spin_lock_irqsave(&efar_lock, flags); + pci_read_config_word(dev, idetm_port, &idetm_data); /* Set PPE, IE, and TIME as appropriate */ @@ -131,6 +137,11 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev) idetm_data |= 0x4000; /* Ensure SITRE is set */ pci_write_config_word(dev, idetm_port, idetm_data); + + pci_read_config_byte(dev, 0x48, &udma_enable); + udma_enable &= ~(1 << (2 * ap->port_no + adev->devno)); + pci_write_config_byte(dev, 0x48, udma_enable); + spin_unlock_irqrestore(&efar_lock, flags); } /** @@ -151,6 +162,7 @@ static void efar_set_dmamode (struct ata_port *ap, struct ata_device *adev) u16 master_data; u8 speed = adev->dma_mode; int devid = adev->devno + 2 * ap->port_no; + unsigned long flags; u8 udma_enable; static const /* ISP RTC */ @@ -160,6 +172,8 @@ static void efar_set_dmamode (struct ata_port *ap, struct ata_device *adev) { 2, 1 }, { 2, 3 }, }; + spin_lock_irqsave(&efar_lock, flags); + pci_read_config_word(dev, master_port, &master_data); pci_read_config_byte(dev, 0x48, &udma_enable); @@ -217,6 +231,7 @@ static void efar_set_dmamode (struct ata_port *ap, struct ata_device *adev) pci_write_config_word(dev, master_port, master_data); } pci_write_config_byte(dev, 0x48, udma_enable); + spin_unlock_irqrestore(&efar_lock, flags); } static struct scsi_host_template efar_sht = { -- cgit v1.2.3 From e99846f18f03badd1bbd4fda79e6ec325e3b9058 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 17 Feb 2010 13:17:31 +0000 Subject: [libata] pata_atiixp: add locking for parallel scanning This is similar change as commit 60c3be3 for ata_piix host driver and while pata_atiixp doesn't enable parallel scan yet the race could probably also be triggered by requesting re-scanning of both ports at the same time using SCSI sysfs interface. [Ported to current tree without other patch dependancies by Alan Cox] Original is Signed-off-by: Bartlomiej Zolnierkiewicz This one is Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_atiixp.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index f697b5b880d..9ad3b4ce1ca 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -1,7 +1,7 @@ /* * pata_atiixp.c - ATI PATA for new ATA layer * (C) 2005 Red Hat Inc - * (C) 2009 Bartlomiej Zolnierkiewicz + * (C) 2009-2010 Bartlomiej Zolnierkiewicz * * Based on * @@ -46,6 +46,8 @@ static int atiixp_cable_detect(struct ata_port *ap) return ATA_CBL_PATA40; } +static DEFINE_SPINLOCK(atiixp_lock); + /** * atiixp_set_pio_timing - set initial PIO mode data * @ap: ATA interface @@ -88,7 +90,10 @@ static void atiixp_set_pio_timing(struct ata_port *ap, struct ata_device *adev, static void atiixp_set_piomode(struct ata_port *ap, struct ata_device *adev) { + unsigned long flags; + spin_lock_irqsave(&atiixp_lock, flags); atiixp_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0); + spin_unlock_irqrestore(&atiixp_lock, flags); } /** @@ -108,6 +113,9 @@ static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev) int dma = adev->dma_mode; int dn = 2 * ap->port_no + adev->devno; int wanted_pio; + unsigned long flags; + + spin_lock_irqsave(&atiixp_lock, flags); if (adev->dma_mode >= XFER_UDMA_0) { u16 udma_mode_data; @@ -145,6 +153,7 @@ static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev) if (adev->pio_mode != wanted_pio) atiixp_set_pio_timing(ap, adev, wanted_pio); + spin_unlock_irqrestore(&atiixp_lock, flags); } /** -- cgit v1.2.3 From 1d3a8118b049252a84641b6643066bda0da0d316 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 17 Feb 2010 13:17:44 +0000 Subject: pata_atiixp: enable parallel scan This was originally proposed by Bartlomiej but as a device specific expansion of the init_one function rather than making the helper more generic. Enable the parallel scan via the generic flags. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_atiixp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index 9ad3b4ce1ca..cbaf2eddac6 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -246,7 +246,8 @@ static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id) if (!pci_test_config_bits(pdev, &atiixp_enable_bits[i])) ppi[i] = &ata_dummy_port_info; - return ata_pci_sff_init_one(pdev, ppi, &atiixp_sht, NULL, 0); + return ata_pci_sff_init_one(pdev, ppi, &atiixp_sht, NULL, + ATA_HOST_PARALLEL_SCAN); } static const struct pci_device_id atiixp[] = { -- cgit v1.2.3 From 7e044a12c73f474e59f1ddecf08d6781c7830f0f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 17 Feb 2010 13:17:52 +0000 Subject: pata_efar: Enable parallel scanning Again originally proposed by Bartlomiej but this does it by using the generic helper logic instead. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_efar.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index 1617421f7e7..3bac0e07969 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -277,7 +277,8 @@ static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - return ata_pci_sff_init_one(pdev, ppi, &efar_sht, NULL, 0); + return ata_pci_sff_init_one(pdev, ppi, &efar_sht, NULL, + ATA_HOST_PARALLEL_SCAN); } static const struct pci_device_id efar_pci_tbl[] = { -- cgit v1.2.3 From a55ab496ea9c820b7192c15ef1fbf3291edfe638 Mon Sep 17 00:00:00 2001 From: Bart Hartgers Date: Sun, 14 Feb 2010 13:04:50 +0100 Subject: sata_via: Delay on vt6420 when starting ATAPI DMA write When writing a disc on certain lite-on dvd-writers (also rebadged as optiarc/LG/...) connected to a vt6420, the ATAPI CDB ends up in the datastream and on the disc, causing silent corruption. Delaying between sending the CDB and starting DMA seems to prevent this. I do not know if there are burners that do not suffer from this, but the patch should be safe for those as well. There are many reports of this issue, but AFAICT no solution was found before. For example: http://lkml.indiana.edu/hypermail/linux/kernel/0802.3/0561.html Signed-off-by: Bart Hartgers Signed-off-by: Jeff Garzik --- drivers/ata/sata_via.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 2a17fa37516..08f65492cc8 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -40,11 +40,13 @@ #include #include #include +#include +#include #include #include #define DRV_NAME "sata_via" -#define DRV_VERSION "2.5" +#define DRV_VERSION "2.6" /* * vt8251 is different from other sata controllers of VIA. It has two @@ -80,6 +82,7 @@ static int vt8251_scr_write(struct ata_link *link, unsigned int scr, u32 val); static void svia_tf_load(struct ata_port *ap, const struct ata_taskfile *tf); static void svia_noop_freeze(struct ata_port *ap); static int vt6420_prereset(struct ata_link *link, unsigned long deadline); +static void vt6420_bmdma_start(struct ata_queued_cmd *qc); static int vt6421_pata_cable_detect(struct ata_port *ap); static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev); static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev); @@ -121,6 +124,7 @@ static struct ata_port_operations vt6420_sata_ops = { .inherits = &svia_base_ops, .freeze = svia_noop_freeze, .prereset = vt6420_prereset, + .bmdma_start = vt6420_bmdma_start, }; static struct ata_port_operations vt6421_pata_ops = { @@ -377,6 +381,17 @@ static int vt6420_prereset(struct ata_link *link, unsigned long deadline) return 0; } +static void vt6420_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + if ((qc->tf.command == ATA_CMD_PACKET) && + (qc->scsicmd->sc_data_direction == DMA_TO_DEVICE)) { + /* Prevents corruption on some ATAPI burners */ + ata_sff_pause(ap); + } + ata_bmdma_start(qc); +} + static int vt6421_pata_cable_detect(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); -- cgit v1.2.3