From a082b5c7882bdbd8a86ace8470ca2ecda796d5a7 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 10 Apr 2008 14:21:06 -0700 Subject: USB: ehci: qh/qtd cleanup comments Provide better comments about qh_completions() and QTD handling. That code can be *VERY* confusing, since it's evolved over a few years to cope with both hardware races and silicon quirks. Remove two unlikely() annotations that match the GCC defaults (and are thus pointless); add an "else" to highlight code flow. This patch doesn't change driver behavior. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-q.c | 50 +++++++++++++++++++++++++++++++++++++---------- 1 file changed, 40 insertions(+), 10 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index c0e752cffc6..64942ec584c 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -336,11 +336,20 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) /* always clean up qtds the hc de-activated */ if ((token & QTD_STS_ACTIVE) == 0) { + /* on STALL, error, and short reads this urb must + * complete and all its qtds must be recycled. + */ if ((token & QTD_STS_HALT) != 0) { stopped = 1; /* magic dummy for some short reads; qh won't advance. * that silicon quirk can kick in with this dummy too. + * + * other short reads won't stop the queue, including + * control transfers (status stage handles that) or + * most other single-qtd reads ... the queue stops if + * URB_SHORT_NOT_OK was set so the driver submitting + * the urbs could clean it up. */ } else if (IS_SHORT_READ (token) && !(qtd->hw_alt_next @@ -354,18 +363,18 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) && HC_IS_RUNNING (ehci_to_hcd(ehci)->state))) { break; + /* scan the whole queue for unlinks whenever it stops */ } else { stopped = 1; - if (unlikely (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state))) + /* cancel everything if we halt, suspend, etc */ + if (!HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) last_status = -ESHUTDOWN; - /* ignore active urbs unless some previous qtd - * for the urb faulted (including short read) or - * its urb was canceled. we may patch qh or qtds. + /* this qtd is active; skip it unless a previous qtd + * for its urb faulted, or its urb was canceled. */ - if (likely(last_status == -EINPROGRESS && - !urb->unlinked)) + else if (last_status == -EINPROGRESS && !urb->unlinked) continue; /* issue status after short control reads */ @@ -375,7 +384,7 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) continue; } - /* token in overlay may be most current */ + /* qh unlinked; token in overlay may be most current */ if (state == QH_STATE_IDLE && cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw_current) @@ -402,11 +411,16 @@ halt: if (likely(last_status == -EINPROGRESS)) last_status = qtd_status; + /* if we're removing something not at the queue head, + * patch the hardware queue pointer. + */ if (stopped && qtd->qtd_list.prev != &qh->qtd_list) { last = list_entry (qtd->qtd_list.prev, struct ehci_qtd, qtd_list); last->hw_next = qtd->hw_next; } + + /* remove qtd; it's recycled after possible urb completion */ list_del (&qtd->qtd_list); last = qtd; } @@ -431,7 +445,15 @@ halt: qh_refresh(ehci, qh); break; case QH_STATE_LINKED: - /* should be rare for periodic transfers, + /* We won't refresh a QH that's linked (after the HC + * stopped the queue). That avoids a race: + * - HC reads first part of QH; + * - CPU updates that first part and the token; + * - HC reads rest of that QH, including token + * Result: HC gets an inconsistent image, and then + * DMAs to/from the wrong memory (corrupting it). + * + * That should be rare for interrupt transfers, * except maybe high bandwidth ... */ if ((cpu_to_hc32(ehci, QH_SMASK) @@ -549,6 +571,12 @@ qh_urb_transaction ( this_qtd_len = qtd_fill(ehci, qtd, buf, len, token, maxpacket); len -= this_qtd_len; buf += this_qtd_len; + + /* + * short reads advance to a "magic" dummy instead of the next + * qtd ... that forces the queue to stop, for manual cleanup. + * (this will usually be overridden later.) + */ if (is_input) qtd->hw_alt_next = ehci->async->hw_alt_next; @@ -568,8 +596,10 @@ qh_urb_transaction ( list_add_tail (&qtd->qtd_list, head); } - /* unless the bulk/interrupt caller wants a chance to clean - * up after short reads, hc should advance qh past this urb + /* + * unless the caller requires manual cleanup after short reads, + * have the alt_next mechanism keep the queue running after the + * last data qtd (the only one, for control and most other cases). */ if (likely ((urb->transfer_flags & URB_SHORT_NOT_OK) == 0 || usb_pipecontrol (urb->pipe))) -- cgit v1.2.3