From c09b890b763df3ccd79a2c34c2f1abeb73179caf Mon Sep 17 00:00:00 2001 From: Knut Wohlrab Date: Tue, 25 Sep 2012 13:21:57 +0200 Subject: spi/imx: set the inactive state of the clock according to the clock polarity There are SPI devices which need a SPI clock with active low polarity and high inactive state. Add the setting of the inactive state ECSPIx_CONFIGREG:SCLK CTL according to the clock polarity ECSPIx_CONFIGREG:SCLK POL: DT without "spi-cpol" = 0 = clock active high polarity = inactive state low DT with "spi-cpol" = 1 = clock active low polarity = inactive state high Signed-off-by: Knut Wohlrab Signed-off-by: Dirk Behme Acked-by: Shawn Guo Signed-off-by: Mark Brown --- drivers/spi/spi-imx.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index e834ff8c018..d64655b70b5 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -197,6 +197,7 @@ static unsigned int spi_imx_clkdiv_2(unsigned int fin, #define MX51_ECSPI_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4)) #define MX51_ECSPI_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8)) #define MX51_ECSPI_CONFIG_SSBPOL(cs) (1 << ((cs) + 12)) +#define MX51_ECSPI_CONFIG_SCLKCTL(cs) (1 << ((cs) + 20)) #define MX51_ECSPI_INT 0x10 #define MX51_ECSPI_INT_TEEN (1 << 0) @@ -287,9 +288,10 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx, if (config->mode & SPI_CPHA) cfg |= MX51_ECSPI_CONFIG_SCLKPHA(config->cs); - if (config->mode & SPI_CPOL) + if (config->mode & SPI_CPOL) { cfg |= MX51_ECSPI_CONFIG_SCLKPOL(config->cs); - + cfg |= MX51_ECSPI_CONFIG_SCLKCTL(config->cs); + } if (config->mode & SPI_CS_HIGH) cfg |= MX51_ECSPI_CONFIG_SSBPOL(config->cs); -- cgit v1.2.3