From 937582382c71b75b29fbb92615629494e1a05ac0 Mon Sep 17 00:00:00 2001 From: Weidong Han Date: Fri, 17 Apr 2009 16:42:14 +0800 Subject: x86, intr-remap: enable interrupt remapping early Currently, when x2apic is not enabled, interrupt remapping will be enabled in init_dmars(), where it is too late to remap ioapic interrupts, that is, ioapic interrupts are really in compatibility mode, not remappable mode. This patch always enables interrupt remapping before ioapic setup, it guarantees all interrupts will be remapped when interrupt remapping is enabled. Thus it doesn't need to set the compatibility interrupt bit. [ Impact: refactor intr-remap init sequence, enable fuller remap mode ] Signed-off-by: Suresh Siddha Signed-off-by: Weidong Han Acked-by: David Woodhouse Cc: iommu@lists.linux-foundation.org Cc: allen.m.kay@intel.com Cc: fenghua.yu@intel.com LKML-Reference: <1239957736-6161-4-git-send-email-weidong.han@intel.com> Signed-off-by: Ingo Molnar --- drivers/pci/intel-iommu.c | 9 --------- drivers/pci/intr_remapping.c | 28 ++++++++++++++-------------- 2 files changed, 14 insertions(+), 23 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 001b328adf8..9ce8f0764be 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -1968,15 +1968,6 @@ static int __init init_dmars(void) } } -#ifdef CONFIG_INTR_REMAP - if (!intr_remapping_enabled) { - ret = enable_intr_remapping(0); - if (ret) - printk(KERN_ERR - "IOMMU: enable interrupt remapping failed\n"); - } -#endif - /* * For each rmrr * for each dev attached to rmrr diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c index f5e0ea724a6..5c2142656e9 100644 --- a/drivers/pci/intr_remapping.c +++ b/drivers/pci/intr_remapping.c @@ -423,20 +423,6 @@ static void iommu_set_intr_remapping(struct intel_iommu *iommu, int mode) readl, (sts & DMA_GSTS_IRTPS), sts); spin_unlock_irqrestore(&iommu->register_lock, flags); - if (mode == 0) { - spin_lock_irqsave(&iommu->register_lock, flags); - - /* enable comaptiblity format interrupt pass through */ - cmd = iommu->gcmd | DMA_GCMD_CFI; - iommu->gcmd |= DMA_GCMD_CFI; - writel(cmd, iommu->reg + DMAR_GCMD_REG); - - IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG, - readl, (sts & DMA_GSTS_CFIS), sts); - - spin_unlock_irqrestore(&iommu->register_lock, flags); - } - /* * global invalidation of interrupt entry cache before enabling * interrupt-remapping. @@ -516,6 +502,20 @@ end: spin_unlock_irqrestore(&iommu->register_lock, flags); } +int __init intr_remapping_supported(void) +{ + struct dmar_drhd_unit *drhd; + + for_each_drhd_unit(drhd) { + struct intel_iommu *iommu = drhd->iommu; + + if (!ecap_ir_support(iommu->ecap)) + return 0; + } + + return 1; +} + int __init enable_intr_remapping(int eim) { struct dmar_drhd_unit *drhd; -- cgit v1.2.3 From 03ea81550676296d94596e4337c771c6ba29f542 Mon Sep 17 00:00:00 2001 From: Weidong Han Date: Fri, 17 Apr 2009 16:42:15 +0800 Subject: x86, intr-remap: add option to disable interrupt remapping Add option "nointremap" to disable interrupt remapping. [ Impact: add new boot option ] Signed-off-by: Suresh Siddha Signed-off-by: Weidong Han Acked-by: David Woodhouse Cc: iommu@lists.linux-foundation.org Cc: allen.m.kay@intel.com Cc: fenghua.yu@intel.com LKML-Reference: <1239957736-6161-5-git-send-email-weidong.han@intel.com> Signed-off-by: Ingo Molnar --- drivers/pci/intr_remapping.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c index 5c2142656e9..842039e4955 100644 --- a/drivers/pci/intr_remapping.c +++ b/drivers/pci/intr_remapping.c @@ -15,6 +15,14 @@ static struct ioapic_scope ir_ioapic[MAX_IO_APICS]; static int ir_ioapic_num; int intr_remapping_enabled; +static int disable_intremap; +static __init int setup_nointremap(char *str) +{ + disable_intremap = 1; + return 0; +} +early_param("nointremap", setup_nointremap); + struct irq_2_iommu { struct intel_iommu *iommu; u16 irte_index; @@ -506,6 +514,9 @@ int __init intr_remapping_supported(void) { struct dmar_drhd_unit *drhd; + if (disable_intremap) + return 0; + for_each_drhd_unit(drhd) { struct intel_iommu *iommu = drhd->iommu; -- cgit v1.2.3 From 85ac16d033370caf6f48d743c8dc8103700f5cc5 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 27 Apr 2009 18:00:38 -0700 Subject: x86/irq: change irq_desc_alloc() to take node instead of cpu This simplifies the node awareness of the code. All our allocators only deal with a NUMA node ID locality not with CPU ids anyway - so there's no need to maintain (and transform) a CPU id all across the IRq layer. v2: keep move_irq_desc related [ Impact: cleanup, prepare IRQ code to be NUMA-aware ] Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Suresh Siddha Cc: "Eric W. Biederman" Cc: Rusty Russell Cc: Jeremy Fitzhardinge LKML-Reference: <49F65536.2020300@kernel.org> Signed-off-by: Ingo Molnar --- drivers/pci/intr_remapping.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c index f5e0ea724a6..9eff36a293e 100644 --- a/drivers/pci/intr_remapping.c +++ b/drivers/pci/intr_remapping.c @@ -23,15 +23,12 @@ struct irq_2_iommu { }; #ifdef CONFIG_GENERIC_HARDIRQS -static struct irq_2_iommu *get_one_free_irq_2_iommu(int cpu) +static struct irq_2_iommu *get_one_free_irq_2_iommu(int node) { struct irq_2_iommu *iommu; - int node; - - node = cpu_to_node(cpu); iommu = kzalloc_node(sizeof(*iommu), GFP_ATOMIC, node); - printk(KERN_DEBUG "alloc irq_2_iommu on cpu %d node %d\n", cpu, node); + printk(KERN_DEBUG "alloc irq_2_iommu on node %d\n", node); return iommu; } @@ -48,7 +45,7 @@ static struct irq_2_iommu *irq_2_iommu(unsigned int irq) return desc->irq_2_iommu; } -static struct irq_2_iommu *irq_2_iommu_alloc_cpu(unsigned int irq, int cpu) +static struct irq_2_iommu *irq_2_iommu_alloc_node(unsigned int irq, int node) { struct irq_desc *desc; struct irq_2_iommu *irq_iommu; @@ -56,7 +53,7 @@ static struct irq_2_iommu *irq_2_iommu_alloc_cpu(unsigned int irq, int cpu) /* * alloc irq desc if not allocated already. */ - desc = irq_to_desc_alloc_cpu(irq, cpu); + desc = irq_to_desc_alloc_node(irq, node); if (!desc) { printk(KERN_INFO "can not get irq_desc for %d\n", irq); return NULL; @@ -65,14 +62,14 @@ static struct irq_2_iommu *irq_2_iommu_alloc_cpu(unsigned int irq, int cpu) irq_iommu = desc->irq_2_iommu; if (!irq_iommu) - desc->irq_2_iommu = get_one_free_irq_2_iommu(cpu); + desc->irq_2_iommu = get_one_free_irq_2_iommu(node); return desc->irq_2_iommu; } static struct irq_2_iommu *irq_2_iommu_alloc(unsigned int irq) { - return irq_2_iommu_alloc_cpu(irq, boot_cpu_id); + return irq_2_iommu_alloc_node(irq, cpu_to_node(boot_cpu_id)); } #else /* !CONFIG_SPARSE_IRQ */ -- cgit v1.2.3 From 56b581ea9591b5767b1e0204c6a06c7d0c49396e Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 27 Apr 2009 18:02:46 -0700 Subject: irq: make ht irq_desc more numa aware Try to get irq_desc on the same node as create_irq_nr(). [ Impact: optimization, make HT IRQs more NUMA-aware ] Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Suresh Siddha Cc: "Eric W. Biederman" Cc: Rusty Russell LKML-Reference: <49F655B6.8020109@kernel.org> Signed-off-by: Ingo Molnar --- drivers/pci/htirq.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/htirq.c b/drivers/pci/htirq.c index bf7d6ce9bbb..4e9dd0fe274 100644 --- a/drivers/pci/htirq.c +++ b/drivers/pci/htirq.c @@ -98,6 +98,7 @@ int __ht_create_irq(struct pci_dev *dev, int idx, ht_irq_update_t *update) int max_irq; int pos; int irq; + int node; pos = pci_find_ht_capability(dev, HT_CAPTYPE_IRQ); if (!pos) @@ -125,7 +126,8 @@ int __ht_create_irq(struct pci_dev *dev, int idx, ht_irq_update_t *update) cfg->msg.address_lo = 0xffffffff; cfg->msg.address_hi = 0xffffffff; - irq = create_irq(); + node = dev_to_node(&dev->dev); + irq = create_irq_nr(0, node); if (irq <= 0) { kfree(cfg); -- cgit v1.2.3 From e20c06fd6950265a899edd96a02dc2e6ae2d1ce5 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 6 May 2009 10:08:22 -0700 Subject: x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector() To prepare those params for pcibios_irq_enable() to call setup_io_apic_routing(). [ Impact: extend function call API to prepare for new functionality ] Signed-off-by: Yinghai Lu Acked-by: Jesse Barnes Cc: Len Brown Cc: Andrew Morton LKML-Reference: <4A01C406.2040303@kernel.org> Signed-off-by: Ingo Molnar --- drivers/pci/hotplug/ibmphp_core.c | 56 +++++++++++++++++++++------------------ 1 file changed, 30 insertions(+), 26 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c index dd18f857dfb..ef53b05a411 100644 --- a/drivers/pci/hotplug/ibmphp_core.c +++ b/drivers/pci/hotplug/ibmphp_core.c @@ -153,45 +153,49 @@ int ibmphp_init_devno(struct slot **cur_slot) return -1; } for (loop = 0; loop < len; loop++) { - if ((*cur_slot)->number == rtable->slots[loop].slot) { - if ((*cur_slot)->bus == rtable->slots[loop].bus) { + if ((*cur_slot)->number == rtable->slots[loop].slot && + (*cur_slot)->bus == rtable->slots[loop].bus) { + int ioapic = -1, ioapic_pin = -1; + int triggering, polarity; + (*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn); for (i = 0; i < 4; i++) (*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus, - (int) (*cur_slot)->device, i); - - debug("(*cur_slot)->irq[0] = %x\n", - (*cur_slot)->irq[0]); - debug("(*cur_slot)->irq[1] = %x\n", - (*cur_slot)->irq[1]); - debug("(*cur_slot)->irq[2] = %x\n", - (*cur_slot)->irq[2]); - debug("(*cur_slot)->irq[3] = %x\n", - (*cur_slot)->irq[3]); - - debug("rtable->exlusive_irqs = %x\n", + (int) (*cur_slot)->device, i. + &ioapic, &ioapic_pin, + &triggering, &polarity); + + debug("(*cur_slot)->irq[0] = %x\n", + (*cur_slot)->irq[0]); + debug("(*cur_slot)->irq[1] = %x\n", + (*cur_slot)->irq[1]); + debug("(*cur_slot)->irq[2] = %x\n", + (*cur_slot)->irq[2]); + debug("(*cur_slot)->irq[3] = %x\n", + (*cur_slot)->irq[3]); + + debug("rtable->exlusive_irqs = %x\n", rtable->exclusive_irqs); - debug("rtable->slots[loop].irq[0].bitmap = %x\n", + debug("rtable->slots[loop].irq[0].bitmap = %x\n", rtable->slots[loop].irq[0].bitmap); - debug("rtable->slots[loop].irq[1].bitmap = %x\n", + debug("rtable->slots[loop].irq[1].bitmap = %x\n", rtable->slots[loop].irq[1].bitmap); - debug("rtable->slots[loop].irq[2].bitmap = %x\n", + debug("rtable->slots[loop].irq[2].bitmap = %x\n", rtable->slots[loop].irq[2].bitmap); - debug("rtable->slots[loop].irq[3].bitmap = %x\n", + debug("rtable->slots[loop].irq[3].bitmap = %x\n", rtable->slots[loop].irq[3].bitmap); - debug("rtable->slots[loop].irq[0].link = %x\n", + debug("rtable->slots[loop].irq[0].link = %x\n", rtable->slots[loop].irq[0].link); - debug("rtable->slots[loop].irq[1].link = %x\n", + debug("rtable->slots[loop].irq[1].link = %x\n", rtable->slots[loop].irq[1].link); - debug("rtable->slots[loop].irq[2].link = %x\n", + debug("rtable->slots[loop].irq[2].link = %x\n", rtable->slots[loop].irq[2].link); - debug("rtable->slots[loop].irq[3].link = %x\n", + debug("rtable->slots[loop].irq[3].link = %x\n", rtable->slots[loop].irq[3].link); - debug("end of init_devno\n"); - kfree(rtable); - return 0; - } + debug("end of init_devno\n"); + kfree(rtable); + return 0; } } -- cgit v1.2.3 From b5710ce92a8cf8e3fc0ffc230cfdbfa23463f1c8 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Tue, 12 May 2009 18:51:28 +0400 Subject: x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector(), fix Fix trivial typo in the drivers/pci/hotplug/ibmphp_core.c changes. [ Impact: build fix ] Signed-off-by: Cyrill Gorcunov CC: Yinghai Lu Cc: eswierk@aristanetworks.com LKML-Reference: <20090512145128.GA10220@lenovo> Signed-off-by: Ingo Molnar --- drivers/pci/hotplug/ibmphp_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c index ef53b05a411..79901a0db88 100644 --- a/drivers/pci/hotplug/ibmphp_core.c +++ b/drivers/pci/hotplug/ibmphp_core.c @@ -161,7 +161,7 @@ int ibmphp_init_devno(struct slot **cur_slot) (*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn); for (i = 0; i < 4; i++) (*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus, - (int) (*cur_slot)->device, i. + (int) (*cur_slot)->device, i, &ioapic, &ioapic_pin, &triggering, &polarity); -- cgit v1.2.3 From e5198075c67a22ec9a09565b1ce88d3d3f5ba855 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 15 May 2009 13:05:16 -0700 Subject: x86, apic: introduce io_apic_irq_attr according to Ingo, io_apic irq-setup related functions have too many parameters with a repetitive signature. So reduce related funcs to get less params by passing a pointer to a newly defined io_apic_irq_attr structure. v2: io_apic_irq ==> irq_attr triggering ==> trigger v3: add set_io_apic_irq_attr [ Impact: cleanup ] Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Jesse Barnes Cc: Len Brown LKML-Reference: <4A08ACD3.2070401@kernel.org> Signed-off-by: Ingo Molnar --- drivers/pci/hotplug/ibmphp_core.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c index 79901a0db88..42e4260c3b1 100644 --- a/drivers/pci/hotplug/ibmphp_core.c +++ b/drivers/pci/hotplug/ibmphp_core.c @@ -155,15 +155,13 @@ int ibmphp_init_devno(struct slot **cur_slot) for (loop = 0; loop < len; loop++) { if ((*cur_slot)->number == rtable->slots[loop].slot && (*cur_slot)->bus == rtable->slots[loop].bus) { - int ioapic = -1, ioapic_pin = -1; - int triggering, polarity; + struct io_apic_irq_attr irq_attr; (*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn); for (i = 0; i < 4; i++) (*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus, (int) (*cur_slot)->device, i, - &ioapic, &ioapic_pin, - &triggering, &polarity); + &irq_attr); debug("(*cur_slot)->irq[0] = %x\n", (*cur_slot)->irq[0]); -- cgit v1.2.3 From b3bad72e494fb2ff0c81be4ca2ddb94adf6a47c2 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 17 May 2009 20:17:06 +0200 Subject: PCI PM: Fix initialization and kexec breakage for some devices Recent PCI PM changes introduced a bug that causes some devices to be mishandled after kexec and during early initialization. The failure scenario in the kexec case is the following: * Assume a PCI device is not power-manageable by the platform and has PCI_PM_CTRL_NO_SOFT_RESET set in PMCSR. * The device is put into D3 before kexec (using the native PCI PM). * After kexec, pci_setup_device() sets the device's power state to PCI_UNKNOWN. * pci_set_power_state(dev, PCI_D0) is called by the device's driver. * __pci_start_power_transition(dev, PCI_D0) is called and since the device is not power-manageable by the platform, it causes pci_update_current_state(dev, PCI_D0) to be called. As a result the device's current_state field is updated to PCI_D3, in accordance with the contents of its PCI PM registers. * pci_raw_set_power_state() is called and it changes the device power state to D0. *However*, it should also call pci_restore_bars() to reinitialize the device, but it doesn't, because the device's current_state field has been modified earlier. To prevent this from happening, modify pci_platform_power_transition() so that it doesn't use pci_update_current_state() to update the current_state field for devices that aren't power-manageable by the platform. Instead, this field should be updated directly for devices that don't support the native PCI PM. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 34bf0fdf504..1a91bf9687a 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -557,7 +557,8 @@ static int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state) } else { error = -ENODEV; /* Fall back to PCI_D0 if native PM is not supported */ - pci_update_current_state(dev, PCI_D0); + if (!dev->pm_cap) + dev->current_state = PCI_D0; } return error; -- cgit v1.2.3 From 9d911d7903926a65ef49ec671bacd86bcee5eb51 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Thu, 21 May 2009 16:21:15 -0600 Subject: PCI Hotplug: acpiphp: don't store a pci_dev in acpiphp_func An oops can occur if a user attempts to use both PCI logical hotplug and the ACPI physical hotplug driver (acpiphp) in this sequence, where $slot/address == $device. In other words, if acpiphp has claimed a PCI device, and that device is logically removed, then acpiphp may oops when it attempts to access it again. # echo 1 > /sys/bus/pci/devices/$device/remove # echo 0 > /sys/bus/pci/slots/$slot/power Unable to handle kernel NULL pointer dereference (address 0000000000000000) Call Trace: [] show_stack+0x50/0xa0 [] show_regs+0x820/0x860 [] die+0x190/0x2a0 [] ia64_do_page_fault+0x8e0/0xa40 [] ia64_native_leave_kernel+0x0/0x270 [] pci_remove_bus_device+0x120/0x260 [] acpiphp_disable_slot+0x410/0x540 [acpiphp] [] disable_slot+0xc0/0x120 [acpiphp] [] power_write_file+0x1e0/0x2a0 [pci_hotplug] [] pci_slot_attr_store+0x60/0xa0 [] sysfs_write_file+0x230/0x2c0 [] vfs_write+0x190/0x2e0 [] sys_write+0x80/0x100 [] ia64_ret_from_syscall+0x0/0x20 [] __kernel_syscall_via_break+0x0/0x20 The root cause of this oops is that the logical remove ("echo 1 > /sys/bus/pci/devices/$device/remove") destroyed the pci_dev. The pci_dev struct itself wasn't deallocated because acpiphp kept a reference, but some of its fields became invalid. acpiphp doesn't have any real reason to keep a pointer to a pci_dev around. It can always derive it using pci_get_slot(). If a logical remove destroys the pci_dev, acpiphp won't find it and is thus prevented from causing mischief. Reviewed-by: Matthew Wilcox Reviewed-by: Kenji Kaneshige Tested-by: Kenji Kaneshige Reported-by: Kenji Kaneshige Acked-by: Bjorn Helgaas Signed-off-by: Alex Chiang Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/acpiphp.h | 1 - drivers/pci/hotplug/acpiphp_glue.c | 63 ++++++++++++++++---------------------- 2 files changed, 26 insertions(+), 38 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h index 4fc168b7009..e68d5f20ffb 100644 --- a/drivers/pci/hotplug/acpiphp.h +++ b/drivers/pci/hotplug/acpiphp.h @@ -129,7 +129,6 @@ struct acpiphp_func { struct acpiphp_bridge *bridge; /* Ejectable PCI-to-PCI bridge */ struct list_head sibling; - struct pci_dev *pci_dev; struct notifier_block nb; acpi_handle handle; diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index a33794d9e0d..3a6064bce56 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -32,9 +32,6 @@ /* * Lifetime rules for pci_dev: - * - The one in acpiphp_func has its refcount elevated by pci_get_slot() - * when the driver is loaded or when an insertion event occurs. It loses - * a refcount when its ejected or the driver unloads. * - The one in acpiphp_bridge has its refcount elevated by pci_get_slot() * when the bridge is scanned and it loses a refcount when the bridge * is removed. @@ -130,6 +127,7 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) unsigned long long adr, sun; int device, function, retval; struct pci_bus *pbus = bridge->pci_bus; + struct pci_dev *pdev; if (!acpi_pci_check_ejectable(pbus, handle) && !is_dock_device(handle)) return AE_OK; @@ -213,10 +211,10 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) newfunc->slot = slot; list_add_tail(&newfunc->sibling, &slot->funcs); - /* associate corresponding pci_dev */ - newfunc->pci_dev = pci_get_slot(pbus, PCI_DEVFN(device, function)); - if (newfunc->pci_dev) { + pdev = pci_get_slot(pbus, PCI_DEVFN(device, function)); + if (pdev) { slot->flags |= (SLOT_ENABLED | SLOT_POWEREDON); + pci_dev_put(pdev); } if (is_dock_device(handle)) { @@ -617,7 +615,6 @@ static void cleanup_bridge(struct acpiphp_bridge *bridge) if (ACPI_FAILURE(status)) err("failed to remove notify handler\n"); } - pci_dev_put(func->pci_dev); list_del(list); kfree(func); } @@ -1101,22 +1098,24 @@ static int __ref enable_device(struct acpiphp_slot *slot) pci_enable_bridges(bus); pci_bus_add_devices(bus); - /* associate pci_dev to our representation */ list_for_each (l, &slot->funcs) { func = list_entry(l, struct acpiphp_func, sibling); - func->pci_dev = pci_get_slot(bus, PCI_DEVFN(slot->device, - func->function)); - if (!func->pci_dev) + dev = pci_get_slot(bus, PCI_DEVFN(slot->device, + func->function)); + if (!dev) continue; - if (func->pci_dev->hdr_type != PCI_HEADER_TYPE_BRIDGE && - func->pci_dev->hdr_type != PCI_HEADER_TYPE_CARDBUS) + if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE && + dev->hdr_type != PCI_HEADER_TYPE_CARDBUS) { + pci_dev_put(dev); continue; + } status = find_p2p_bridge(func->handle, (u32)1, bus, NULL); if (ACPI_FAILURE(status)) warn("find_p2p_bridge failed (error code = 0x%x)\n", status); + pci_dev_put(dev); } slot->flags |= SLOT_ENABLED; @@ -1142,17 +1141,14 @@ static void disable_bridges(struct pci_bus *bus) */ static int disable_device(struct acpiphp_slot *slot) { - int retval = 0; struct acpiphp_func *func; - struct list_head *l; + struct pci_dev *pdev; /* is this slot already disabled? */ if (!(slot->flags & SLOT_ENABLED)) goto err_exit; - list_for_each (l, &slot->funcs) { - func = list_entry(l, struct acpiphp_func, sibling); - + list_for_each_entry(func, &slot->funcs, sibling) { if (func->bridge) { /* cleanup p2p bridges under this P2P bridge */ cleanup_p2p_bridge(func->bridge->handle, @@ -1160,35 +1156,28 @@ static int disable_device(struct acpiphp_slot *slot) func->bridge = NULL; } - if (func->pci_dev) { - pci_stop_bus_device(func->pci_dev); - if (func->pci_dev->subordinate) { - disable_bridges(func->pci_dev->subordinate); - pci_disable_device(func->pci_dev); + pdev = pci_get_slot(slot->bridge->pci_bus, + PCI_DEVFN(slot->device, func->function)); + if (pdev) { + pci_stop_bus_device(pdev); + if (pdev->subordinate) { + disable_bridges(pdev->subordinate); + pci_disable_device(pdev); } + pci_remove_bus_device(pdev); + pci_dev_put(pdev); } } - list_for_each (l, &slot->funcs) { - func = list_entry(l, struct acpiphp_func, sibling); - + list_for_each_entry(func, &slot->funcs, sibling) { acpiphp_unconfigure_ioapics(func->handle); acpiphp_bus_trim(func->handle); - /* try to remove anyway. - * acpiphp_bus_add might have been failed */ - - if (!func->pci_dev) - continue; - - pci_remove_bus_device(func->pci_dev); - pci_dev_put(func->pci_dev); - func->pci_dev = NULL; } slot->flags &= (~SLOT_ENABLED); - err_exit: - return retval; +err_exit: + return 0; } -- cgit v1.2.3 From f79b1b146b52765ee38bfb91bb14eb850fa98017 Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Thu, 28 May 2009 00:25:05 +0800 Subject: PCI: use fixed-up device class when configuring device The device class may be changed after the fixup, so re-read the class value from pci_dev when configuring the device. Otherwise some devices such as JMicron SATA controller won't work. Reviewed-by: Matthew Wilcox Reviewed-by: Grant Grundler Tested-by: Marc Dionne Signed-off-by: Yu Zhao Signed-off-by: Jesse Barnes --- drivers/pci/probe.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index e3c3e081b83..f1ae2475fff 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -745,6 +745,8 @@ int pci_setup_device(struct pci_dev *dev) /* Early fixups, before probing the BARs */ pci_fixup_device(pci_fixup_early, dev); + /* device class may be changed after fixup */ + class = dev->class >> 8; switch (dev->hdr_type) { /* header type */ case PCI_HEADER_TYPE_NORMAL: /* standard header */ -- cgit v1.2.3 From db5ed9beabc0a2084ab0e0cc46bf911b8bf16fa8 Mon Sep 17 00:00:00 2001 From: Peter Huewe Date: Sat, 6 Jun 2009 14:58:56 +0200 Subject: trivial: pci hotplug: adding __init/__exit macros to sgi_hotplug Trivial patch which adds the __init and __exit macros to the module_init / module_exit functions from drivers/pci/hotplug/sgi_hotplug.c linux version 2.6.30-rc8 Signed-off-by: Peter Huewe Signed-off-by: Jiri Kosina --- drivers/pci/hotplug/sgi_hotplug.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c index 3eee70928d4..2d6da78fddb 100644 --- a/drivers/pci/hotplug/sgi_hotplug.c +++ b/drivers/pci/hotplug/sgi_hotplug.c @@ -679,7 +679,7 @@ alloc_err: return rc; } -static int sn_pci_hotplug_init(void) +static int __init sn_pci_hotplug_init(void) { struct pci_bus *pci_bus = NULL; int rc; @@ -716,7 +716,7 @@ static int sn_pci_hotplug_init(void) return registered == 1 ? 0 : -ENODEV; } -static void sn_pci_hotplug_exit(void) +static void __exit sn_pci_hotplug_exit(void) { struct hotplug_slot *bss_hotplug_slot; -- cgit v1.2.3