From 6a2a0e738225fc9ec063f84b79f0adf5c0ed176c Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Sat, 9 Jul 2011 00:17:51 -0400 Subject: ath5k: fix typos, bad comment formatting and GHz in place of MHz Signed-off-by: Pavel Roskin Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/reg.h | 42 ++++++++++++++++++------------------ 1 file changed, 21 insertions(+), 21 deletions(-) (limited to 'drivers/net/wireless/ath/ath5k/reg.h') diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h index 994d29ace34..f5c1000045d 100644 --- a/drivers/net/wireless/ath/ath5k/reg.h +++ b/drivers/net/wireless/ath/ath5k/reg.h @@ -170,7 +170,7 @@ #define AR5K_TXCFG_SDMAMR_S 0 #define AR5K_TXCFG_B_MODE 0x00000008 /* Set b mode for 5111 (enable 2111) */ #define AR5K_TXCFG_TXFSTP 0x00000008 /* TX DMA full Stop [5210] */ -#define AR5K_TXCFG_TXFULL 0x000003f0 /* TX Triger level mask */ +#define AR5K_TXCFG_TXFULL 0x000003f0 /* TX Trigger level mask */ #define AR5K_TXCFG_TXFULL_S 4 #define AR5K_TXCFG_TXFULL_0B 0x00000000 #define AR5K_TXCFG_TXFULL_64B 0x00000010 @@ -283,16 +283,16 @@ */ #define AR5K_ISR 0x001c /* Register Address [5210] */ #define AR5K_PISR 0x0080 /* Register Address [5211+] */ -#define AR5K_ISR_RXOK 0x00000001 /* Frame successfuly received */ +#define AR5K_ISR_RXOK 0x00000001 /* Frame successfully received */ #define AR5K_ISR_RXDESC 0x00000002 /* RX descriptor request */ #define AR5K_ISR_RXERR 0x00000004 /* Receive error */ #define AR5K_ISR_RXNOFRM 0x00000008 /* No frame received (receive timeout) */ #define AR5K_ISR_RXEOL 0x00000010 /* Empty RX descriptor */ #define AR5K_ISR_RXORN 0x00000020 /* Receive FIFO overrun */ -#define AR5K_ISR_TXOK 0x00000040 /* Frame successfuly transmited */ +#define AR5K_ISR_TXOK 0x00000040 /* Frame successfully transmitted */ #define AR5K_ISR_TXDESC 0x00000080 /* TX descriptor request */ #define AR5K_ISR_TXERR 0x00000100 /* Transmit error */ -#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmited (transmit timeout) */ +#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout) */ #define AR5K_ISR_TXEOL 0x00000400 /* Empty TX descriptor */ #define AR5K_ISR_TXURN 0x00000800 /* Transmit FIFO underrun */ #define AR5K_ISR_MIB 0x00001000 /* Update MIB counters */ @@ -377,16 +377,16 @@ */ #define AR5K_IMR 0x0020 /* Register Address [5210] */ #define AR5K_PIMR 0x00a0 /* Register Address [5211+] */ -#define AR5K_IMR_RXOK 0x00000001 /* Frame successfuly received*/ +#define AR5K_IMR_RXOK 0x00000001 /* Frame successfully received*/ #define AR5K_IMR_RXDESC 0x00000002 /* RX descriptor request*/ #define AR5K_IMR_RXERR 0x00000004 /* Receive error*/ #define AR5K_IMR_RXNOFRM 0x00000008 /* No frame received (receive timeout)*/ #define AR5K_IMR_RXEOL 0x00000010 /* Empty RX descriptor*/ #define AR5K_IMR_RXORN 0x00000020 /* Receive FIFO overrun*/ -#define AR5K_IMR_TXOK 0x00000040 /* Frame successfuly transmited*/ +#define AR5K_IMR_TXOK 0x00000040 /* Frame successfully transmitted*/ #define AR5K_IMR_TXDESC 0x00000080 /* TX descriptor request*/ #define AR5K_IMR_TXERR 0x00000100 /* Transmit error*/ -#define AR5K_IMR_TXNOFRM 0x00000200 /* No frame transmited (transmit timeout)*/ +#define AR5K_IMR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout)*/ #define AR5K_IMR_TXEOL 0x00000400 /* Empty TX descriptor*/ #define AR5K_IMR_TXURN 0x00000800 /* Transmit FIFO underrun*/ #define AR5K_IMR_MIB 0x00001000 /* Update MIB counters*/ @@ -601,7 +601,7 @@ * QCU misc registers */ #define AR5K_QCU_MISC_BASE 0x09c0 /* Register Address -Queue0 MISC */ -#define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame sheduling mask */ +#define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame scheduling mask */ #define AR5K_QCU_MISC_FRSHED_ASAP 0 /* ASAP */ #define AR5K_QCU_MISC_FRSHED_CBR 1 /* Constant Bit Rate */ #define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated */ @@ -653,13 +653,13 @@ * registers [5211+] * * These registers control the various characteristics of each queue - * for 802.11e (WME) combatibility so they go together with + * for 802.11e (WME) compatibility so they go together with * QCU registers in pairs. For each queue we have a QCU mask register, * (0x1000 - 0x102c), a local-IFS settings register (0x1040 - 0x106c), * a retry limit register (0x1080 - 0x10ac), a channel time register * (0x10c0 - 0x10ec), a misc-settings register (0x1100 - 0x112c) and * a sequence number register (0x1140 - 0x116c). It seems that "global" - * registers here afect all queues (see use of DCU_GBL_IFS_SLOT in ar5k). + * registers here affect all queues (see use of DCU_GBL_IFS_SLOT in ar5k). * We use the same macros here for easier register access. * */ @@ -779,7 +779,7 @@ * and it's used for generating pseudo-random * number sequences. * - * (If i understand corectly, random numbers are + * (If i understand correctly, random numbers are * used for idle sensing -multiplied with cwmin/max etc-) */ #define AR5K_DCU_GBL_IFS_MISC 0x10f0 /* Register Address */ @@ -1007,7 +1007,7 @@ #define AR5K_PCIE_WAEN 0x407c /* - * PCI-E Serializer/Desirializer + * PCI-E Serializer/Deserializer * registers */ #define AR5K_PCIE_SERDES 0x4080 @@ -1227,7 +1227,7 @@ AR5K_USEC_5210 : AR5K_USEC_5211) #define AR5K_USEC_1 0x0000007f /* clock cycles for 1us */ #define AR5K_USEC_1_S 0 -#define AR5K_USEC_32 0x00003f80 /* clock cycles for 1us while on 32Mhz clock */ +#define AR5K_USEC_32 0x00003f80 /* clock cycles for 1us while on 32MHz clock */ #define AR5K_USEC_32_S 7 #define AR5K_USEC_TX_LATENCY_5211 0x007fc000 #define AR5K_USEC_TX_LATENCY_5211_S 14 @@ -1632,7 +1632,7 @@ #define AR5K_SLEEP0_NEXT_DTIM 0x0007ffff /* Mask for next DTIM (?) */ #define AR5K_SLEEP0_NEXT_DTIM_S 0 #define AR5K_SLEEP0_ASSUME_DTIM 0x00080000 /* Assume DTIM */ -#define AR5K_SLEEP0_ENH_SLEEP_EN 0x00100000 /* Enable enchanced sleep control */ +#define AR5K_SLEEP0_ENH_SLEEP_EN 0x00100000 /* Enable enhanced sleep control */ #define AR5K_SLEEP0_CABTO 0xff000000 /* Mask for CAB Time Out */ #define AR5K_SLEEP0_CABTO_S 24 @@ -1657,7 +1657,7 @@ /* * TX power control (TPC) register * - * XXX: PCDAC steps (0.5dbm) or DBM ? + * XXX: PCDAC steps (0.5dBm) or dBm ? * */ #define AR5K_TXPC 0x80e8 /* Register Address */ @@ -1673,7 +1673,7 @@ /* * Profile count registers * - * These registers can be cleared and freezed with ATH5K_MIBC, but they do not + * These registers can be cleared and frozen with ATH5K_MIBC, but they do not * generate a MIB interrupt. * Instead of overflowing, they shift by one bit to the right. All registers * shift together, i.e. when one reaches the max, all shift at the same time by @@ -1838,7 +1838,7 @@ #define AR5K_PHY_TST2_TRIG_SEL 0x00000007 /* Trigger select (?)*/ #define AR5K_PHY_TST2_TRIG 0x00000010 /* Trigger (?) */ #define AR5K_PHY_TST2_CBUS_MODE 0x00000060 /* Cardbus mode (?) */ -#define AR5K_PHY_TST2_CLK32 0x00000400 /* CLK_OUT is CLK32 (32Khz external) */ +#define AR5K_PHY_TST2_CLK32 0x00000400 /* CLK_OUT is CLK32 (32kHz external) */ #define AR5K_PHY_TST2_CHANCOR_DUMP_EN 0x00000800 /* Enable Chancor dump (?) */ #define AR5K_PHY_TST2_EVEN_CHANCOR_DUMP 0x00001000 /* Even Chancor dump (?) */ #define AR5K_PHY_TST2_RFSILENT_EN 0x00002000 /* Enable RFSILENT */ @@ -2002,7 +2002,7 @@ #define AR5K_PHY_AGCCTL_OFDM_DIV_DIS 0x00000008 /* Disable antenna diversity on OFDM modes */ #define AR5K_PHY_AGCCTL_NF_EN 0x00008000 /* Enable nf calibration to happen (?) */ #define AR5K_PHY_AGCTL_FLTR_CAL 0x00010000 /* Allow filter calibration (?) */ -#define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automaticaly */ +#define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automatically */ /* * PHY noise floor status register (CCA = Clear Channel Assessment) @@ -2089,7 +2089,7 @@ * * It's obvious from the code that 0x989c is the buffer register but * for the other special registers that we write to after sending each - * packet, i have no idea. So i'll name them BUFFER_CONTROL_X registers + * packet, i have no idea. So I'll name them BUFFER_CONTROL_X registers * for now. It's interesting that they are also used for some other operations. */ @@ -2340,7 +2340,7 @@ #define AR5K_PHY_RESTART_DIV_GC_S 18 /* - * RF Bus access request register (for synth-oly channel switching) + * RF Bus access request register (for synth-only channel switching) */ #define AR5K_PHY_RFBUS_REQ 0x997C #define AR5K_PHY_RFBUS_REQ_REQUEST 0x00000001 @@ -2382,7 +2382,7 @@ */ #define AR5K_BB_GAIN_BASE 0x9b00 /* BaseBand Amplifier Gain table base address */ #define AR5K_BB_GAIN(_n) (AR5K_BB_GAIN_BASE + ((_n) << 2)) -#define AR5K_RF_GAIN_BASE 0x9a00 /* RF Amplrifier Gain table base address */ +#define AR5K_RF_GAIN_BASE 0x9a00 /* RF Amplifier Gain table base address */ #define AR5K_RF_GAIN(_n) (AR5K_RF_GAIN_BASE + ((_n) << 2)) /* -- cgit v1.2.3