From 08fafd8461c0ca8d1b389b7dc11d17e7b2331282 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 24 Dec 2009 05:31:20 +0000 Subject: ucc_geth: Don't needlessly change MAC settings in adjust_link() If PHY doesn't have an IRQ, phylib would poll for link changes, and would call adjust_link() every second. In that case we disable and enable the controller every second. Let's better check if there is actually anything changed, and, if so, change the MAC settings. Signed-off-by: Anton Vorontsov Signed-off-by: David S. Miller --- drivers/net/ucc_geth.c | 33 ++++++++++++++++++--------------- 1 file changed, 18 insertions(+), 15 deletions(-) (limited to 'drivers/net/ucc_geth.c') diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 7fff4c5a169..41ad2f3697c 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -1651,25 +1651,28 @@ static void adjust_link(struct net_device *dev) ugeth->oldspeed = phydev->speed; } - /* - * To change the MAC configuration we need to disable the - * controller. To do so, we have to either grab ugeth->lock, - * which is a bad idea since 'graceful stop' commands might - * take quite a while, or we can quiesce driver's activity. - */ - ugeth_quiesce(ugeth); - ugeth_disable(ugeth, COMM_DIR_RX_AND_TX); - - out_be32(&ug_regs->maccfg2, tempval); - out_be32(&uf_regs->upsmr, upsmr); - - ugeth_enable(ugeth, COMM_DIR_RX_AND_TX); - ugeth_activate(ugeth); - if (!ugeth->oldlink) { new_state = 1; ugeth->oldlink = 1; } + + if (new_state) { + /* + * To change the MAC configuration we need to disable + * the controller. To do so, we have to either grab + * ugeth->lock, which is a bad idea since 'graceful + * stop' commands might take quite a while, or we can + * quiesce driver's activity. + */ + ugeth_quiesce(ugeth); + ugeth_disable(ugeth, COMM_DIR_RX_AND_TX); + + out_be32(&ug_regs->maccfg2, tempval); + out_be32(&uf_regs->upsmr, upsmr); + + ugeth_enable(ugeth, COMM_DIR_RX_AND_TX); + ugeth_activate(ugeth); + } } else if (ugeth->oldlink) { new_state = 1; ugeth->oldlink = 0; -- cgit v1.2.3