From e689cf4a042772f727450035b102579b0c01bdc7 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Thu, 12 May 2011 23:04:46 -0700 Subject: cassini/niu/sun*: Move the Sun drivers Moves the Sun drivers into drivers/net/ethernet/sun/ and make the necessary Kconfig and Makefile changes. Oliver Hartkopp suggested removing the sun* prefix on the driver names. This type of change I will leave up to the driver maintainers. CC: Sam Creasey CC: Adrian Sun CC: Benjamin Herrenscmidt Signed-off-by: Jeff Kirsher --- drivers/net/sungem_phy.c | 1200 ---------------------------------------------- 1 file changed, 1200 deletions(-) delete mode 100644 drivers/net/sungem_phy.c (limited to 'drivers/net/sungem_phy.c') diff --git a/drivers/net/sungem_phy.c b/drivers/net/sungem_phy.c deleted file mode 100644 index d16880d7099..00000000000 --- a/drivers/net/sungem_phy.c +++ /dev/null @@ -1,1200 +0,0 @@ -/* - * PHY drivers for the sungem ethernet driver. - * - * This file could be shared with other drivers. - * - * (c) 2002-2007, Benjamin Herrenscmidt (benh@kernel.crashing.org) - * - * TODO: - * - Add support for PHYs that provide an IRQ line - * - Eventually moved the entire polling state machine in - * there (out of the eth driver), so that it can easily be - * skipped on PHYs that implement it in hardware. - * - On LXT971 & BCM5201, Apple uses some chip specific regs - * to read the link status. Figure out why and if it makes - * sense to do the same (magic aneg ?) - * - Apple has some additional power management code for some - * Broadcom PHYs that they "hide" from the OpenSource version - * of darwin, still need to reverse engineer that - */ - - -#include - -#include -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_PPC_PMAC -#include -#endif - -#include "sungem_phy.h" - -/* Link modes of the BCM5400 PHY */ -static const int phy_BCM5400_link_table[8][3] = { - { 0, 0, 0 }, /* No link */ - { 0, 0, 0 }, /* 10BT Half Duplex */ - { 1, 0, 0 }, /* 10BT Full Duplex */ - { 0, 1, 0 }, /* 100BT Half Duplex */ - { 0, 1, 0 }, /* 100BT Half Duplex */ - { 1, 1, 0 }, /* 100BT Full Duplex*/ - { 1, 0, 1 }, /* 1000BT */ - { 1, 0, 1 }, /* 1000BT */ -}; - -static inline int __phy_read(struct mii_phy* phy, int id, int reg) -{ - return phy->mdio_read(phy->dev, id, reg); -} - -static inline void __phy_write(struct mii_phy* phy, int id, int reg, int val) -{ - phy->mdio_write(phy->dev, id, reg, val); -} - -static inline int phy_read(struct mii_phy* phy, int reg) -{ - return phy->mdio_read(phy->dev, phy->mii_id, reg); -} - -static inline void phy_write(struct mii_phy* phy, int reg, int val) -{ - phy->mdio_write(phy->dev, phy->mii_id, reg, val); -} - -static int reset_one_mii_phy(struct mii_phy* phy, int phy_id) -{ - u16 val; - int limit = 10000; - - val = __phy_read(phy, phy_id, MII_BMCR); - val &= ~(BMCR_ISOLATE | BMCR_PDOWN); - val |= BMCR_RESET; - __phy_write(phy, phy_id, MII_BMCR, val); - - udelay(100); - - while (--limit) { - val = __phy_read(phy, phy_id, MII_BMCR); - if ((val & BMCR_RESET) == 0) - break; - udelay(10); - } - if ((val & BMCR_ISOLATE) && limit > 0) - __phy_write(phy, phy_id, MII_BMCR, val & ~BMCR_ISOLATE); - - return limit <= 0; -} - -static int bcm5201_init(struct mii_phy* phy) -{ - u16 data; - - data = phy_read(phy, MII_BCM5201_MULTIPHY); - data &= ~MII_BCM5201_MULTIPHY_SUPERISOLATE; - phy_write(phy, MII_BCM5201_MULTIPHY, data); - - phy_write(phy, MII_BCM5201_INTERRUPT, 0); - - return 0; -} - -static int bcm5201_suspend(struct mii_phy* phy) -{ - phy_write(phy, MII_BCM5201_INTERRUPT, 0); - phy_write(phy, MII_BCM5201_MULTIPHY, MII_BCM5201_MULTIPHY_SUPERISOLATE); - - return 0; -} - -static int bcm5221_init(struct mii_phy* phy) -{ - u16 data; - - data = phy_read(phy, MII_BCM5221_TEST); - phy_write(phy, MII_BCM5221_TEST, - data | MII_BCM5221_TEST_ENABLE_SHADOWS); - - data = phy_read(phy, MII_BCM5221_SHDOW_AUX_STAT2); - phy_write(phy, MII_BCM5221_SHDOW_AUX_STAT2, - data | MII_BCM5221_SHDOW_AUX_STAT2_APD); - - data = phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4); - phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4, - data | MII_BCM5221_SHDOW_AUX_MODE4_CLKLOPWR); - - data = phy_read(phy, MII_BCM5221_TEST); - phy_write(phy, MII_BCM5221_TEST, - data & ~MII_BCM5221_TEST_ENABLE_SHADOWS); - - return 0; -} - -static int bcm5221_suspend(struct mii_phy* phy) -{ - u16 data; - - data = phy_read(phy, MII_BCM5221_TEST); - phy_write(phy, MII_BCM5221_TEST, - data | MII_BCM5221_TEST_ENABLE_SHADOWS); - - data = phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4); - phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4, - data | MII_BCM5221_SHDOW_AUX_MODE4_IDDQMODE); - - return 0; -} - -static int bcm5241_init(struct mii_phy* phy) -{ - u16 data; - - data = phy_read(phy, MII_BCM5221_TEST); - phy_write(phy, MII_BCM5221_TEST, - data | MII_BCM5221_TEST_ENABLE_SHADOWS); - - data = phy_read(phy, MII_BCM5221_SHDOW_AUX_STAT2); - phy_write(phy, MII_BCM5221_SHDOW_AUX_STAT2, - data | MII_BCM5221_SHDOW_AUX_STAT2_APD); - - data = phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4); - phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4, - data & ~MII_BCM5241_SHDOW_AUX_MODE4_STANDBYPWR); - - data = phy_read(phy, MII_BCM5221_TEST); - phy_write(phy, MII_BCM5221_TEST, - data & ~MII_BCM5221_TEST_ENABLE_SHADOWS); - - return 0; -} - -static int bcm5241_suspend(struct mii_phy* phy) -{ - u16 data; - - data = phy_read(phy, MII_BCM5221_TEST); - phy_write(phy, MII_BCM5221_TEST, - data | MII_BCM5221_TEST_ENABLE_SHADOWS); - - data = phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4); - phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4, - data | MII_BCM5241_SHDOW_AUX_MODE4_STANDBYPWR); - - return 0; -} - -static int bcm5400_init(struct mii_phy* phy) -{ - u16 data; - - /* Configure for gigabit full duplex */ - data = phy_read(phy, MII_BCM5400_AUXCONTROL); - data |= MII_BCM5400_AUXCONTROL_PWR10BASET; - phy_write(phy, MII_BCM5400_AUXCONTROL, data); - - data = phy_read(phy, MII_BCM5400_GB_CONTROL); - data |= MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP; - phy_write(phy, MII_BCM5400_GB_CONTROL, data); - - udelay(100); - - /* Reset and configure cascaded 10/100 PHY */ - (void)reset_one_mii_phy(phy, 0x1f); - - data = __phy_read(phy, 0x1f, MII_BCM5201_MULTIPHY); - data |= MII_BCM5201_MULTIPHY_SERIALMODE; - __phy_write(phy, 0x1f, MII_BCM5201_MULTIPHY, data); - - data = phy_read(phy, MII_BCM5400_AUXCONTROL); - data &= ~MII_BCM5400_AUXCONTROL_PWR10BASET; - phy_write(phy, MII_BCM5400_AUXCONTROL, data); - - return 0; -} - -static int bcm5400_suspend(struct mii_phy* phy) -{ -#if 0 /* Commented out in Darwin... someone has those dawn docs ? */ - phy_write(phy, MII_BMCR, BMCR_PDOWN); -#endif - return 0; -} - -static int bcm5401_init(struct mii_phy* phy) -{ - u16 data; - int rev; - - rev = phy_read(phy, MII_PHYSID2) & 0x000f; - if (rev == 0 || rev == 3) { - /* Some revisions of 5401 appear to need this - * initialisation sequence to disable, according - * to OF, "tap power management" - * - * WARNING ! OF and Darwin don't agree on the - * register addresses. OF seem to interpret the - * register numbers below as decimal - * - * Note: This should (and does) match tg3_init_5401phy_dsp - * in the tg3.c driver. -DaveM - */ - phy_write(phy, 0x18, 0x0c20); - phy_write(phy, 0x17, 0x0012); - phy_write(phy, 0x15, 0x1804); - phy_write(phy, 0x17, 0x0013); - phy_write(phy, 0x15, 0x1204); - phy_write(phy, 0x17, 0x8006); - phy_write(phy, 0x15, 0x0132); - phy_write(phy, 0x17, 0x8006); - phy_write(phy, 0x15, 0x0232); - phy_write(phy, 0x17, 0x201f); - phy_write(phy, 0x15, 0x0a20); - } - - /* Configure for gigabit full duplex */ - data = phy_read(phy, MII_BCM5400_GB_CONTROL); - data |= MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP; - phy_write(phy, MII_BCM5400_GB_CONTROL, data); - - udelay(10); - - /* Reset and configure cascaded 10/100 PHY */ - (void)reset_one_mii_phy(phy, 0x1f); - - data = __phy_read(phy, 0x1f, MII_BCM5201_MULTIPHY); - data |= MII_BCM5201_MULTIPHY_SERIALMODE; - __phy_write(phy, 0x1f, MII_BCM5201_MULTIPHY, data); - - return 0; -} - -static int bcm5401_suspend(struct mii_phy* phy) -{ -#if 0 /* Commented out in Darwin... someone has those dawn docs ? */ - phy_write(phy, MII_BMCR, BMCR_PDOWN); -#endif - return 0; -} - -static int bcm5411_init(struct mii_phy* phy) -{ - u16 data; - - /* Here's some more Apple black magic to setup - * some voltage stuffs. - */ - phy_write(phy, 0x1c, 0x8c23); - phy_write(phy, 0x1c, 0x8ca3); - phy_write(phy, 0x1c, 0x8c23); - - /* Here, Apple seems to want to reset it, do - * it as well - */ - phy_write(phy, MII_BMCR, BMCR_RESET); - phy_write(phy, MII_BMCR, 0x1340); - - data = phy_read(phy, MII_BCM5400_GB_CONTROL); - data |= MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP; - phy_write(phy, MII_BCM5400_GB_CONTROL, data); - - udelay(10); - - /* Reset and configure cascaded 10/100 PHY */ - (void)reset_one_mii_phy(phy, 0x1f); - - return 0; -} - -static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise) -{ - u16 ctl, adv; - - phy->autoneg = 1; - phy->speed = SPEED_10; - phy->duplex = DUPLEX_HALF; - phy->pause = 0; - phy->advertising = advertise; - - /* Setup standard advertise */ - adv = phy_read(phy, MII_ADVERTISE); - adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4); - if (advertise & ADVERTISED_10baseT_Half) - adv |= ADVERTISE_10HALF; - if (advertise & ADVERTISED_10baseT_Full) - adv |= ADVERTISE_10FULL; - if (advertise & ADVERTISED_100baseT_Half) - adv |= ADVERTISE_100HALF; - if (advertise & ADVERTISED_100baseT_Full) - adv |= ADVERTISE_100FULL; - phy_write(phy, MII_ADVERTISE, adv); - - /* Start/Restart aneg */ - ctl = phy_read(phy, MII_BMCR); - ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); - phy_write(phy, MII_BMCR, ctl); - - return 0; -} - -static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd) -{ - u16 ctl; - - phy->autoneg = 0; - phy->speed = speed; - phy->duplex = fd; - phy->pause = 0; - - ctl = phy_read(phy, MII_BMCR); - ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_ANENABLE); - - /* First reset the PHY */ - phy_write(phy, MII_BMCR, ctl | BMCR_RESET); - - /* Select speed & duplex */ - switch(speed) { - case SPEED_10: - break; - case SPEED_100: - ctl |= BMCR_SPEED100; - break; - case SPEED_1000: - default: - return -EINVAL; - } - if (fd == DUPLEX_FULL) - ctl |= BMCR_FULLDPLX; - phy_write(phy, MII_BMCR, ctl); - - return 0; -} - -static int genmii_poll_link(struct mii_phy *phy) -{ - u16 status; - - (void)phy_read(phy, MII_BMSR); - status = phy_read(phy, MII_BMSR); - if ((status & BMSR_LSTATUS) == 0) - return 0; - if (phy->autoneg && !(status & BMSR_ANEGCOMPLETE)) - return 0; - return 1; -} - -static int genmii_read_link(struct mii_phy *phy) -{ - u16 lpa; - - if (phy->autoneg) { - lpa = phy_read(phy, MII_LPA); - - if (lpa & (LPA_10FULL | LPA_100FULL)) - phy->duplex = DUPLEX_FULL; - else - phy->duplex = DUPLEX_HALF; - if (lpa & (LPA_100FULL | LPA_100HALF)) - phy->speed = SPEED_100; - else - phy->speed = SPEED_10; - phy->pause = 0; - } - /* On non-aneg, we assume what we put in BMCR is the speed, - * though magic-aneg shouldn't prevent this case from occurring - */ - - return 0; -} - -static int generic_suspend(struct mii_phy* phy) -{ - phy_write(phy, MII_BMCR, BMCR_PDOWN); - - return 0; -} - -static int bcm5421_init(struct mii_phy* phy) -{ - u16 data; - unsigned int id; - - id = (phy_read(phy, MII_PHYSID1) << 16 | phy_read(phy, MII_PHYSID2)); - - /* Revision 0 of 5421 needs some fixups */ - if (id == 0x002060e0) { - /* This is borrowed from MacOS - */ - phy_write(phy, 0x18, 0x1007); - data = phy_read(phy, 0x18); - phy_write(phy, 0x18, data | 0x0400); - phy_write(phy, 0x18, 0x0007); - data = phy_read(phy, 0x18); - phy_write(phy, 0x18, data | 0x0800); - phy_write(phy, 0x17, 0x000a); - data = phy_read(phy, 0x15); - phy_write(phy, 0x15, data | 0x0200); - } - - /* Pick up some init code from OF for K2 version */ - if ((id & 0xfffffff0) == 0x002062e0) { - phy_write(phy, 4, 0x01e1); - phy_write(phy, 9, 0x0300); - } - - /* Check if we can enable automatic low power */ -#ifdef CONFIG_PPC_PMAC - if (phy->platform_data) { - struct device_node *np = of_get_parent(phy->platform_data); - int can_low_power = 1; - if (np == NULL || of_get_property(np, "no-autolowpower", NULL)) - can_low_power = 0; - if (can_low_power) { - /* Enable automatic low-power */ - phy_write(phy, 0x1c, 0x9002); - phy_write(phy, 0x1c, 0xa821); - phy_write(phy, 0x1c, 0x941d); - } - } -#endif /* CONFIG_PPC_PMAC */ - - return 0; -} - -static int bcm54xx_setup_aneg(struct mii_phy *phy, u32 advertise) -{ - u16 ctl, adv; - - phy->autoneg = 1; - phy->speed = SPEED_10; - phy->duplex = DUPLEX_HALF; - phy->pause = 0; - phy->advertising = advertise; - - /* Setup standard advertise */ - adv = phy_read(phy, MII_ADVERTISE); - adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4); - if (advertise & ADVERTISED_10baseT_Half) - adv |= ADVERTISE_10HALF; - if (advertise & ADVERTISED_10baseT_Full) - adv |= ADVERTISE_10FULL; - if (advertise & ADVERTISED_100baseT_Half) - adv |= ADVERTISE_100HALF; - if (advertise & ADVERTISED_100baseT_Full) - adv |= ADVERTISE_100FULL; - if (advertise & ADVERTISED_Pause) - adv |= ADVERTISE_PAUSE_CAP; - if (advertise & ADVERTISED_Asym_Pause) - adv |= ADVERTISE_PAUSE_ASYM; - phy_write(phy, MII_ADVERTISE, adv); - - /* Setup 1000BT advertise */ - adv = phy_read(phy, MII_1000BASETCONTROL); - adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP|MII_1000BASETCONTROL_HALFDUPLEXCAP); - if (advertise & SUPPORTED_1000baseT_Half) - adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP; - if (advertise & SUPPORTED_1000baseT_Full) - adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP; - phy_write(phy, MII_1000BASETCONTROL, adv); - - /* Start/Restart aneg */ - ctl = phy_read(phy, MII_BMCR); - ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); - phy_write(phy, MII_BMCR, ctl); - - return 0; -} - -static int bcm54xx_setup_forced(struct mii_phy *phy, int speed, int fd) -{ - u16 ctl; - - phy->autoneg = 0; - phy->speed = speed; - phy->duplex = fd; - phy->pause = 0; - - ctl = phy_read(phy, MII_BMCR); - ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_SPD2|BMCR_ANENABLE); - - /* First reset the PHY */ - phy_write(phy, MII_BMCR, ctl | BMCR_RESET); - - /* Select speed & duplex */ - switch(speed) { - case SPEED_10: - break; - case SPEED_100: - ctl |= BMCR_SPEED100; - break; - case SPEED_1000: - ctl |= BMCR_SPD2; - } - if (fd == DUPLEX_FULL) - ctl |= BMCR_FULLDPLX; - - // XXX Should we set the sungem to GII now on 1000BT ? - - phy_write(phy, MII_BMCR, ctl); - - return 0; -} - -static int bcm54xx_read_link(struct mii_phy *phy) -{ - int link_mode; - u16 val; - - if (phy->autoneg) { - val = phy_read(phy, MII_BCM5400_AUXSTATUS); - link_mode = ((val & MII_BCM5400_AUXSTATUS_LINKMODE_MASK) >> - MII_BCM5400_AUXSTATUS_LINKMODE_SHIFT); - phy->duplex = phy_BCM5400_link_table[link_mode][0] ? - DUPLEX_FULL : DUPLEX_HALF; - phy->speed = phy_BCM5400_link_table[link_mode][2] ? - SPEED_1000 : - (phy_BCM5400_link_table[link_mode][1] ? - SPEED_100 : SPEED_10); - val = phy_read(phy, MII_LPA); - phy->pause = (phy->duplex == DUPLEX_FULL) && - ((val & LPA_PAUSE) != 0); - } - /* On non-aneg, we assume what we put in BMCR is the speed, - * though magic-aneg shouldn't prevent this case from occurring - */ - - return 0; -} - -static int marvell88e1111_init(struct mii_phy* phy) -{ - u16 rev; - - /* magic init sequence for rev 0 */ - rev = phy_read(phy, MII_PHYSID2) & 0x000f; - if (rev == 0) { - phy_write(phy, 0x1d, 0x000a); - phy_write(phy, 0x1e, 0x0821); - - phy_write(phy, 0x1d, 0x0006); - phy_write(phy, 0x1e, 0x8600); - - phy_write(phy, 0x1d, 0x000b); - phy_write(phy, 0x1e, 0x0100); - - phy_write(phy, 0x1d, 0x0004); - phy_write(phy, 0x1e, 0x4850); - } - return 0; -} - -#define BCM5421_MODE_MASK (1 << 5) - -static int bcm5421_poll_link(struct mii_phy* phy) -{ - u32 phy_reg; - int mode; - - /* find out in what mode we are */ - phy_write(phy, MII_NCONFIG, 0x1000); - phy_reg = phy_read(phy, MII_NCONFIG); - - mode = (phy_reg & BCM5421_MODE_MASK) >> 5; - - if ( mode == BCM54XX_COPPER) - return genmii_poll_link(phy); - - /* try to find out wether we have a link */ - phy_write(phy, MII_NCONFIG, 0x2000); - phy_reg = phy_read(phy, MII_NCONFIG); - - if (phy_reg & 0x0020) - return 0; - else - return 1; -} - -static int bcm5421_read_link(struct mii_phy* phy) -{ - u32 phy_reg; - int mode; - - /* find out in what mode we are */ - phy_write(phy, MII_NCONFIG, 0x1000); - phy_reg = phy_read(phy, MII_NCONFIG); - - mode = (phy_reg & BCM5421_MODE_MASK ) >> 5; - - if ( mode == BCM54XX_COPPER) - return bcm54xx_read_link(phy); - - phy->speed = SPEED_1000; - - /* find out wether we are running half- or full duplex */ - phy_write(phy, MII_NCONFIG, 0x2000); - phy_reg = phy_read(phy, MII_NCONFIG); - - if ( (phy_reg & 0x0080) >> 7) - phy->duplex |= DUPLEX_HALF; - else - phy->duplex |= DUPLEX_FULL; - - return 0; -} - -static int bcm5421_enable_fiber(struct mii_phy* phy, int autoneg) -{ - /* enable fiber mode */ - phy_write(phy, MII_NCONFIG, 0x9020); - /* LEDs active in both modes, autosense prio = fiber */ - phy_write(phy, MII_NCONFIG, 0x945f); - - if (!autoneg) { - /* switch off fibre autoneg */ - phy_write(phy, MII_NCONFIG, 0xfc01); - phy_write(phy, 0x0b, 0x0004); - } - - phy->autoneg = autoneg; - - return 0; -} - -#define BCM5461_FIBER_LINK (1 << 2) -#define BCM5461_MODE_MASK (3 << 1) - -static int bcm5461_poll_link(struct mii_phy* phy) -{ - u32 phy_reg; - int mode; - - /* find out in what mode we are */ - phy_write(phy, MII_NCONFIG, 0x7c00); - phy_reg = phy_read(phy, MII_NCONFIG); - - mode = (phy_reg & BCM5461_MODE_MASK ) >> 1; - - if ( mode == BCM54XX_COPPER) - return genmii_poll_link(phy); - - /* find out wether we have a link */ - phy_write(phy, MII_NCONFIG, 0x7000); - phy_reg = phy_read(phy, MII_NCONFIG); - - if (phy_reg & BCM5461_FIBER_LINK) - return 1; - else - return 0; -} - -#define BCM5461_FIBER_DUPLEX (1 << 3) - -static int bcm5461_read_link(struct mii_phy* phy) -{ - u32 phy_reg; - int mode; - - /* find out in what mode we are */ - phy_write(phy, MII_NCONFIG, 0x7c00); - phy_reg = phy_read(phy, MII_NCONFIG); - - mode = (phy_reg & BCM5461_MODE_MASK ) >> 1; - - if ( mode == BCM54XX_COPPER) { - return bcm54xx_read_link(phy); - } - - phy->speed = SPEED_1000; - - /* find out wether we are running half- or full duplex */ - phy_write(phy, MII_NCONFIG, 0x7000); - phy_reg = phy_read(phy, MII_NCONFIG); - - if (phy_reg & BCM5461_FIBER_DUPLEX) - phy->duplex |= DUPLEX_FULL; - else - phy->duplex |= DUPLEX_HALF; - - return 0; -} - -static int bcm5461_enable_fiber(struct mii_phy* phy, int autoneg) -{ - /* select fiber mode, enable 1000 base-X registers */ - phy_write(phy, MII_NCONFIG, 0xfc0b); - - if (autoneg) { - /* enable fiber with no autonegotiation */ - phy_write(phy, MII_ADVERTISE, 0x01e0); - phy_write(phy, MII_BMCR, 0x1140); - } else { - /* enable fiber with autonegotiation */ - phy_write(phy, MII_BMCR, 0x0140); - } - - phy->autoneg = autoneg; - - return 0; -} - -static int marvell_setup_aneg(struct mii_phy *phy, u32 advertise) -{ - u16 ctl, adv; - - phy->autoneg = 1; - phy->speed = SPEED_10; - phy->duplex = DUPLEX_HALF; - phy->pause = 0; - phy->advertising = advertise; - - /* Setup standard advertise */ - adv = phy_read(phy, MII_ADVERTISE); - adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4); - if (advertise & ADVERTISED_10baseT_Half) - adv |= ADVERTISE_10HALF; - if (advertise & ADVERTISED_10baseT_Full) - adv |= ADVERTISE_10FULL; - if (advertise & ADVERTISED_100baseT_Half) - adv |= ADVERTISE_100HALF; - if (advertise & ADVERTISED_100baseT_Full) - adv |= ADVERTISE_100FULL; - if (advertise & ADVERTISED_Pause) - adv |= ADVERTISE_PAUSE_CAP; - if (advertise & ADVERTISED_Asym_Pause) - adv |= ADVERTISE_PAUSE_ASYM; - phy_write(phy, MII_ADVERTISE, adv); - - /* Setup 1000BT advertise & enable crossover detect - * XXX How do we advertise 1000BT ? Darwin source is - * confusing here, they read from specific control and - * write to control... Someone has specs for those - * beasts ? - */ - adv = phy_read(phy, MII_M1011_PHY_SPEC_CONTROL); - adv |= MII_M1011_PHY_SPEC_CONTROL_AUTO_MDIX; - adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP | - MII_1000BASETCONTROL_HALFDUPLEXCAP); - if (advertise & SUPPORTED_1000baseT_Half) - adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP; - if (advertise & SUPPORTED_1000baseT_Full) - adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP; - phy_write(phy, MII_1000BASETCONTROL, adv); - - /* Start/Restart aneg */ - ctl = phy_read(phy, MII_BMCR); - ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); - phy_write(phy, MII_BMCR, ctl); - - return 0; -} - -static int marvell_setup_forced(struct mii_phy *phy, int speed, int fd) -{ - u16 ctl, ctl2; - - phy->autoneg = 0; - phy->speed = speed; - phy->duplex = fd; - phy->pause = 0; - - ctl = phy_read(phy, MII_BMCR); - ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_SPD2|BMCR_ANENABLE); - ctl |= BMCR_RESET; - - /* Select speed & duplex */ - switch(speed) { - case SPEED_10: - break; - case SPEED_100: - ctl |= BMCR_SPEED100; - break; - /* I'm not sure about the one below, again, Darwin source is - * quite confusing and I lack chip specs - */ - case SPEED_1000: - ctl |= BMCR_SPD2; - } - if (fd == DUPLEX_FULL) - ctl |= BMCR_FULLDPLX; - - /* Disable crossover. Again, the way Apple does it is strange, - * though I don't assume they are wrong ;) - */ - ctl2 = phy_read(phy, MII_M1011_PHY_SPEC_CONTROL); - ctl2 &= ~(MII_M1011_PHY_SPEC_CONTROL_MANUAL_MDIX | - MII_M1011_PHY_SPEC_CONTROL_AUTO_MDIX | - MII_1000BASETCONTROL_FULLDUPLEXCAP | - MII_1000BASETCONTROL_HALFDUPLEXCAP); - if (speed == SPEED_1000) - ctl2 |= (fd == DUPLEX_FULL) ? - MII_1000BASETCONTROL_FULLDUPLEXCAP : - MII_1000BASETCONTROL_HALFDUPLEXCAP; - phy_write(phy, MII_1000BASETCONTROL, ctl2); - - // XXX Should we set the sungem to GII now on 1000BT ? - - phy_write(phy, MII_BMCR, ctl); - - return 0; -} - -static int marvell_read_link(struct mii_phy *phy) -{ - u16 status, pmask; - - if (phy->autoneg) { - status = phy_read(phy, MII_M1011_PHY_SPEC_STATUS); - if ((status & MII_M1011_PHY_SPEC_STATUS_RESOLVED) == 0) - return -EAGAIN; - if (status & MII_M1011_PHY_SPEC_STATUS_1000) - phy->speed = SPEED_1000; - else if (status & MII_M1011_PHY_SPEC_STATUS_100) - phy->speed = SPEED_100; - else - phy->speed = SPEED_10; - if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX) - phy->duplex = DUPLEX_FULL; - else - phy->duplex = DUPLEX_HALF; - pmask = MII_M1011_PHY_SPEC_STATUS_TX_PAUSE | - MII_M1011_PHY_SPEC_STATUS_RX_PAUSE; - phy->pause = (status & pmask) == pmask; - } - /* On non-aneg, we assume what we put in BMCR is the speed, - * though magic-aneg shouldn't prevent this case from occurring - */ - - return 0; -} - -#define MII_BASIC_FEATURES \ - (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \ - SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \ - SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII | \ - SUPPORTED_Pause) - -/* On gigabit capable PHYs, we advertise Pause support but not asym pause - * support for now as I'm not sure it's supported and Darwin doesn't do - * it neither. --BenH. - */ -#define MII_GBIT_FEATURES \ - (MII_BASIC_FEATURES | \ - SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full) - -/* Broadcom BCM 5201 */ -static struct mii_phy_ops bcm5201_phy_ops = { - .init = bcm5201_init, - .suspend = bcm5201_suspend, - .setup_aneg = genmii_setup_aneg, - .setup_forced = genmii_setup_forced, - .poll_link = genmii_poll_link, - .read_link = genmii_read_link, -}; - -static struct mii_phy_def bcm5201_phy_def = { - .phy_id = 0x00406210, - .phy_id_mask = 0xfffffff0, - .name = "BCM5201", - .features = MII_BASIC_FEATURES, - .magic_aneg = 1, - .ops = &bcm5201_phy_ops -}; - -/* Broadcom BCM 5221 */ -static struct mii_phy_ops bcm5221_phy_ops = { - .suspend = bcm5221_suspend, - .init = bcm5221_init, - .setup_aneg = genmii_setup_aneg, - .setup_forced = genmii_setup_forced, - .poll_link = genmii_poll_link, - .read_link = genmii_read_link, -}; - -static struct mii_phy_def bcm5221_phy_def = { - .phy_id = 0x004061e0, - .phy_id_mask = 0xfffffff0, - .name = "BCM5221", - .features = MII_BASIC_FEATURES, - .magic_aneg = 1, - .ops = &bcm5221_phy_ops -}; - -/* Broadcom BCM 5241 */ -static struct mii_phy_ops bcm5241_phy_ops = { - .suspend = bcm5241_suspend, - .init = bcm5241_init, - .setup_aneg = genmii_setup_aneg, - .setup_forced = genmii_setup_forced, - .poll_link = genmii_poll_link, - .read_link = genmii_read_link, -}; -static struct mii_phy_def bcm5241_phy_def = { - .phy_id = 0x0143bc30, - .phy_id_mask = 0xfffffff0, - .name = "BCM5241", - .features = MII_BASIC_FEATURES, - .magic_aneg = 1, - .ops = &bcm5241_phy_ops -}; - -/* Broadcom BCM 5400 */ -static struct mii_phy_ops bcm5400_phy_ops = { - .init = bcm5400_init, - .suspend = bcm5400_suspend, - .setup_aneg = bcm54xx_setup_aneg, - .setup_forced = bcm54xx_setup_forced, - .poll_link = genmii_poll_link, - .read_link = bcm54xx_read_link, -}; - -static struct mii_phy_def bcm5400_phy_def = { - .phy_id = 0x00206040, - .phy_id_mask = 0xfffffff0, - .name = "BCM5400", - .features = MII_GBIT_FEATURES, - .magic_aneg = 1, - .ops = &bcm5400_phy_ops -}; - -/* Broadcom BCM 5401 */ -static struct mii_phy_ops bcm5401_phy_ops = { - .init = bcm5401_init, - .suspend = bcm5401_suspend, - .setup_aneg = bcm54xx_setup_aneg, - .setup_forced = bcm54xx_setup_forced, - .poll_link = genmii_poll_link, - .read_link = bcm54xx_read_link, -}; - -static struct mii_phy_def bcm5401_phy_def = { - .phy_id = 0x00206050, - .phy_id_mask = 0xfffffff0, - .name = "BCM5401", - .features = MII_GBIT_FEATURES, - .magic_aneg = 1, - .ops = &bcm5401_phy_ops -}; - -/* Broadcom BCM 5411 */ -static struct mii_phy_ops bcm5411_phy_ops = { - .init = bcm5411_init, - .suspend = generic_suspend, - .setup_aneg = bcm54xx_setup_aneg, - .setup_forced = bcm54xx_setup_forced, - .poll_link = genmii_poll_link, - .read_link = bcm54xx_read_link, -}; - -static struct mii_phy_def bcm5411_phy_def = { - .phy_id = 0x00206070, - .phy_id_mask = 0xfffffff0, - .name = "BCM5411", - .features = MII_GBIT_FEATURES, - .magic_aneg = 1, - .ops = &bcm5411_phy_ops -}; - -/* Broadcom BCM 5421 */ -static struct mii_phy_ops bcm5421_phy_ops = { - .init = bcm5421_init, - .suspend = generic_suspend, - .setup_aneg = bcm54xx_setup_aneg, - .setup_forced = bcm54xx_setup_forced, - .poll_link = bcm5421_poll_link, - .read_link = bcm5421_read_link, - .enable_fiber = bcm5421_enable_fiber, -}; - -static struct mii_phy_def bcm5421_phy_def = { - .phy_id = 0x002060e0, - .phy_id_mask = 0xfffffff0, - .name = "BCM5421", - .features = MII_GBIT_FEATURES, - .magic_aneg = 1, - .ops = &bcm5421_phy_ops -}; - -/* Broadcom BCM 5421 built-in K2 */ -static struct mii_phy_ops bcm5421k2_phy_ops = { - .init = bcm5421_init, - .suspend = generic_suspend, - .setup_aneg = bcm54xx_setup_aneg, - .setup_forced = bcm54xx_setup_forced, - .poll_link = genmii_poll_link, - .read_link = bcm54xx_read_link, -}; - -static struct mii_phy_def bcm5421k2_phy_def = { - .phy_id = 0x002062e0, - .phy_id_mask = 0xfffffff0, - .name = "BCM5421-K2", - .features = MII_GBIT_FEATURES, - .magic_aneg = 1, - .ops = &bcm5421k2_phy_ops -}; - -static struct mii_phy_ops bcm5461_phy_ops = { - .init = bcm5421_init, - .suspend = generic_suspend, - .setup_aneg = bcm54xx_setup_aneg, - .setup_forced = bcm54xx_setup_forced, - .poll_link = bcm5461_poll_link, - .read_link = bcm5461_read_link, - .enable_fiber = bcm5461_enable_fiber, -}; - -static struct mii_phy_def bcm5461_phy_def = { - .phy_id = 0x002060c0, - .phy_id_mask = 0xfffffff0, - .name = "BCM5461", - .features = MII_GBIT_FEATURES, - .magic_aneg = 1, - .ops = &bcm5461_phy_ops -}; - -/* Broadcom BCM 5462 built-in Vesta */ -static struct mii_phy_ops bcm5462V_phy_ops = { - .init = bcm5421_init, - .suspend = generic_suspend, - .setup_aneg = bcm54xx_setup_aneg, - .setup_forced = bcm54xx_setup_forced, - .poll_link = genmii_poll_link, - .read_link = bcm54xx_read_link, -}; - -static struct mii_phy_def bcm5462V_phy_def = { - .phy_id = 0x002060d0, - .phy_id_mask = 0xfffffff0, - .name = "BCM5462-Vesta", - .features = MII_GBIT_FEATURES, - .magic_aneg = 1, - .ops = &bcm5462V_phy_ops -}; - -/* Marvell 88E1101 amd 88E1111 */ -static struct mii_phy_ops marvell88e1101_phy_ops = { - .suspend = generic_suspend, - .setup_aneg = marvell_setup_aneg, - .setup_forced = marvell_setup_forced, - .poll_link = genmii_poll_link, - .read_link = marvell_read_link -}; - -static struct mii_phy_ops marvell88e1111_phy_ops = { - .init = marvell88e1111_init, - .suspend = generic_suspend, - .setup_aneg = marvell_setup_aneg, - .setup_forced = marvell_setup_forced, - .poll_link = genmii_poll_link, - .read_link = marvell_read_link -}; - -/* two revs in darwin for the 88e1101 ... I could use a datasheet - * to get the proper names... - */ -static struct mii_phy_def marvell88e1101v1_phy_def = { - .phy_id = 0x01410c20, - .phy_id_mask = 0xfffffff0, - .name = "Marvell 88E1101v1", - .features = MII_GBIT_FEATURES, - .magic_aneg = 1, - .ops = &marvell88e1101_phy_ops -}; -static struct mii_phy_def marvell88e1101v2_phy_def = { - .phy_id = 0x01410c60, - .phy_id_mask = 0xfffffff0, - .name = "Marvell 88E1101v2", - .features = MII_GBIT_FEATURES, - .magic_aneg = 1, - .ops = &marvell88e1101_phy_ops -}; -static struct mii_phy_def marvell88e1111_phy_def = { - .phy_id = 0x01410cc0, - .phy_id_mask = 0xfffffff0, - .name = "Marvell 88E1111", - .features = MII_GBIT_FEATURES, - .magic_aneg = 1, - .ops = &marvell88e1111_phy_ops -}; - -/* Generic implementation for most 10/100 PHYs */ -static struct mii_phy_ops generic_phy_ops = { - .setup_aneg = genmii_setup_aneg, - .setup_forced = genmii_setup_forced, - .poll_link = genmii_poll_link, - .read_link = genmii_read_link -}; - -static struct mii_phy_def genmii_phy_def = { - .phy_id = 0x00000000, - .phy_id_mask = 0x00000000, - .name = "Generic MII", - .features = MII_BASIC_FEATURES, - .magic_aneg = 0, - .ops = &generic_phy_ops -}; - -static struct mii_phy_def* mii_phy_table[] = { - &bcm5201_phy_def, - &bcm5221_phy_def, - &bcm5241_phy_def, - &bcm5400_phy_def, - &bcm5401_phy_def, - &bcm5411_phy_def, - &bcm5421_phy_def, - &bcm5421k2_phy_def, - &bcm5461_phy_def, - &bcm5462V_phy_def, - &marvell88e1101v1_phy_def, - &marvell88e1101v2_phy_def, - &marvell88e1111_phy_def, - &genmii_phy_def, - NULL -}; - -int mii_phy_probe(struct mii_phy *phy, int mii_id) -{ - int rc; - u32 id; - struct mii_phy_def* def; - int i; - - /* We do not reset the mii_phy structure as the driver - * may re-probe the PHY regulary - */ - phy->mii_id = mii_id; - - /* Take PHY out of isloate mode and reset it. */ - rc = reset_one_mii_phy(phy, mii_id); - if (rc) - goto fail; - - /* Read ID and find matching entry */ - id = (phy_read(phy, MII_PHYSID1) << 16 | phy_read(phy, MII_PHYSID2)); - printk(KERN_DEBUG KBUILD_MODNAME ": " "PHY ID: %x, addr: %x\n", - id, mii_id); - for (i=0; (def = mii_phy_table[i]) != NULL; i++) - if ((id & def->phy_id_mask) == def->phy_id) - break; - /* Should never be NULL (we have a generic entry), but... */ - if (def == NULL) - goto fail; - - phy->def = def; - - return 0; -fail: - phy->speed = 0; - phy->duplex = 0; - phy->pause = 0; - phy->advertising = 0; - return -ENODEV; -} - -EXPORT_SYMBOL(mii_phy_probe); -MODULE_LICENSE("GPL"); - -- cgit v1.2.3