From ab6bf42e2339580b5d87746d0ff4da4b1578b03e Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 27 May 2009 14:38:34 -0700 Subject: mlx4_core: Add module parameter for number of MTTs per segment The current MTT allocator uses kmalloc() to allocate a buffer for its buddy allocator, and thus is limited in the amount of MTT segments that it can control. As a result, the size of memory that can be registered is limited too. This patch uses a module parameter to control the number of MTT entries that each segment represents, allowing more memory to be registered with the same number of segments. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/net/mlx4/main.c | 14 ++++++++++++-- drivers/net/mlx4/mr.c | 6 +++--- drivers/net/mlx4/profile.c | 2 +- 3 files changed, 16 insertions(+), 6 deletions(-) (limited to 'drivers/net/mlx4') diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c index 30bea968969..018348c0119 100644 --- a/drivers/net/mlx4/main.c +++ b/drivers/net/mlx4/main.c @@ -100,6 +100,10 @@ module_param_named(use_prio, use_prio, bool, 0444); MODULE_PARM_DESC(use_prio, "Enable steering by VLAN priority on ETH ports " "(0/1, default 0)"); +static int log_mtts_per_seg = ilog2(MLX4_MTT_ENTRY_PER_SEG); +module_param_named(log_mtts_per_seg, log_mtts_per_seg, int, 0444); +MODULE_PARM_DESC(log_mtts_per_seg, "Log2 number of MTT entries per segment (1-5)"); + int mlx4_check_port_params(struct mlx4_dev *dev, enum mlx4_port_type *port_type) { @@ -203,12 +207,13 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) dev->caps.max_cqes = dev_cap->max_cq_sz - 1; dev->caps.reserved_cqs = dev_cap->reserved_cqs; dev->caps.reserved_eqs = dev_cap->reserved_eqs; + dev->caps.mtts_per_seg = 1 << log_mtts_per_seg; dev->caps.reserved_mtts = DIV_ROUND_UP(dev_cap->reserved_mtts, - MLX4_MTT_ENTRY_PER_SEG); + dev->caps.mtts_per_seg); dev->caps.reserved_mrws = dev_cap->reserved_mrws; dev->caps.reserved_uars = dev_cap->reserved_uars; dev->caps.reserved_pds = dev_cap->reserved_pds; - dev->caps.mtt_entry_sz = MLX4_MTT_ENTRY_PER_SEG * dev_cap->mtt_entry_sz; + dev->caps.mtt_entry_sz = dev->caps.mtts_per_seg * dev_cap->mtt_entry_sz; dev->caps.max_msg_sz = dev_cap->max_msg_sz; dev->caps.page_size_cap = ~(u32) (dev_cap->min_page_sz - 1); dev->caps.flags = dev_cap->flags; @@ -1304,6 +1309,11 @@ static int __init mlx4_verify_params(void) return -1; } + if ((log_mtts_per_seg < 1) || (log_mtts_per_seg > 5)) { + printk(KERN_WARNING "mlx4_core: bad log_mtts_per_seg: %d\n", log_mtts_per_seg); + return -1; + } + return 0; } diff --git a/drivers/net/mlx4/mr.c b/drivers/net/mlx4/mr.c index 0caf74cae8b..3b8973d1993 100644 --- a/drivers/net/mlx4/mr.c +++ b/drivers/net/mlx4/mr.c @@ -209,7 +209,7 @@ int mlx4_mtt_init(struct mlx4_dev *dev, int npages, int page_shift, } else mtt->page_shift = page_shift; - for (mtt->order = 0, i = MLX4_MTT_ENTRY_PER_SEG; i < npages; i <<= 1) + for (mtt->order = 0, i = dev->caps.mtts_per_seg; i < npages; i <<= 1) ++mtt->order; mtt->first_seg = mlx4_alloc_mtt_range(dev, mtt->order); @@ -350,7 +350,7 @@ int mlx4_mr_enable(struct mlx4_dev *dev, struct mlx4_mr *mr) mpt_entry->pd_flags |= cpu_to_be32(MLX4_MPT_PD_FLAG_FAST_REG | MLX4_MPT_PD_FLAG_RAE); mpt_entry->mtt_sz = cpu_to_be32((1 << mr->mtt.order) * - MLX4_MTT_ENTRY_PER_SEG); + dev->caps.mtts_per_seg); } else { mpt_entry->flags |= cpu_to_be32(MLX4_MPT_FLAG_SW_OWNS); } @@ -391,7 +391,7 @@ static int mlx4_write_mtt_chunk(struct mlx4_dev *dev, struct mlx4_mtt *mtt, (start_index + npages - 1) / (PAGE_SIZE / sizeof (u64))) return -EINVAL; - if (start_index & (MLX4_MTT_ENTRY_PER_SEG - 1)) + if (start_index & (dev->caps.mtts_per_seg - 1)) return -EINVAL; mtts = mlx4_table_find(&priv->mr_table.mtt_table, mtt->first_seg + diff --git a/drivers/net/mlx4/profile.c b/drivers/net/mlx4/profile.c index cebdf3243ca..bd22df95adf 100644 --- a/drivers/net/mlx4/profile.c +++ b/drivers/net/mlx4/profile.c @@ -98,7 +98,7 @@ u64 mlx4_make_profile(struct mlx4_dev *dev, profile[MLX4_RES_EQ].size = dev_cap->eqc_entry_sz; profile[MLX4_RES_DMPT].size = dev_cap->dmpt_entry_sz; profile[MLX4_RES_CMPT].size = dev_cap->cmpt_entry_sz; - profile[MLX4_RES_MTT].size = MLX4_MTT_ENTRY_PER_SEG * dev_cap->mtt_entry_sz; + profile[MLX4_RES_MTT].size = dev->caps.mtts_per_seg * dev_cap->mtt_entry_sz; profile[MLX4_RES_MCG].size = MLX4_MGM_ENTRY_SIZE; profile[MLX4_RES_QP].num = request->num_qp; -- cgit v1.2.3 From d1fdf24b4074a8d962f9a28519c99dcdd66bdee3 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Sun, 14 Jun 2009 13:30:45 -0700 Subject: mlx4_core: Don't double-free IRQs when falling back from MSI-X to INTx When both MSI-X and legacy INTx fail to generate an interrupt, the driver frees the MSI-X interrupts twice. Fix this by clearing the have_irq flag for the MSI-X interrupts when they are freed the first time. This is the same bug that was reported in ib_mthca by Yinghai Lu . Signed-off-by: Roland Dreier --- drivers/net/mlx4/eq.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net/mlx4') diff --git a/drivers/net/mlx4/eq.c b/drivers/net/mlx4/eq.c index 8830dcb92ec..ce064e32420 100644 --- a/drivers/net/mlx4/eq.c +++ b/drivers/net/mlx4/eq.c @@ -497,8 +497,10 @@ static void mlx4_free_irqs(struct mlx4_dev *dev) if (eq_table->have_irq) free_irq(dev->pdev->irq, dev); for (i = 0; i < dev->caps.num_comp_vectors + 1; ++i) - if (eq_table->eq[i].have_irq) + if (eq_table->eq[i].have_irq) { free_irq(eq_table->eq[i].irq, eq_table->eq + i); + eq_table->eq[i].have_irq = 0; + } kfree(eq_table->irq_names); } -- cgit v1.2.3