From 5739dd72139a8aa079288d245dcd5726dd248e6b Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 22 Aug 2012 16:28:18 +0300 Subject: UBI: print image sequence number as unsigned integer Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/build.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mtd/ubi') diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 2c5ed5ca9c3..3174dd40095 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -940,7 +940,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset) ubi_msg("number of PEBs reserved for bad PEB handling: %d", ubi->beb_rsvd_pebs); ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec); - ubi_msg("image sequence number: %d", ubi->image_seq); + ubi_msg("image sequence number: %u", ubi->image_seq); /* * The below lock makes sure we do not race with 'ubi_thread()' which -- cgit v1.2.3 From 183ae6cf8b903129eea05c596b057372818c2074 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 22 Aug 2012 16:40:05 +0300 Subject: UBI: print PID in debug messages Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/debug.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/mtd/ubi') diff --git a/drivers/mtd/ubi/debug.h b/drivers/mtd/ubi/debug.h index d5d2645b51a..d9e89ec9098 100644 --- a/drivers/mtd/ubi/debug.h +++ b/drivers/mtd/ubi/debug.h @@ -39,7 +39,8 @@ void ubi_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr); print_hex_dump(l, ps, pt, r, g, b, len, a) #define ubi_dbg_msg(type, fmt, ...) \ - pr_debug("UBI DBG " type ": " fmt "\n", ##__VA_ARGS__) + pr_debug("UBI DBG " type " (pid %d): " fmt "\n", current->pid, \ + ##__VA_ARGS__) /* Just a debugging messages not related to any specific UBI subsystem */ #define dbg_msg(fmt, ...) \ -- cgit v1.2.3 From 8beeb3bb9df8caba36ad3e4f226255dff9c92556 Mon Sep 17 00:00:00 2001 From: Shmulik Ladkani Date: Wed, 4 Jul 2012 11:06:00 +0300 Subject: UBI: introduce new bad PEB limit Introduce 'ubi->bad_peb_limit', which specifies an upper limit of PEBs UBI expects to go bad. Currently, it is initialized to a fixed percentage of total PEBs in the UBI device (configurable via CONFIG_MTD_UBI_BEB_LIMIT). The 'bad_peb_limit' is intended to be used for calculating the amount of PEBs UBI needs to reserve for bad eraseblock handling. Artem: minor amendments. Signed-off-by: Shmulik Ladkani Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/Kconfig | 26 +++++++++++++++++++------- drivers/mtd/ubi/build.c | 12 +++++++++++- drivers/mtd/ubi/ubi.h | 2 ++ 3 files changed, 32 insertions(+), 8 deletions(-) (limited to 'drivers/mtd/ubi') diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig index ea4b95b5451..76195ac90e5 100644 --- a/drivers/mtd/ubi/Kconfig +++ b/drivers/mtd/ubi/Kconfig @@ -34,13 +34,25 @@ config MTD_UBI_BEB_RESERVE help If the MTD device admits of bad eraseblocks (e.g. NAND flash), UBI reserves some amount of physical eraseblocks to handle new bad - eraseblocks. For example, if a flash physical eraseblock becomes bad, - UBI uses these reserved physical eraseblocks to relocate the bad one. - This option specifies how many physical eraseblocks will be reserved - for bad eraseblock handling (percents of total number of good flash - eraseblocks). If the underlying flash does not admit of bad - eraseblocks (e.g. NOR flash), this value is ignored and nothing is - reserved. Leave the default value if unsure. + eraseblocks. When a physical eraseblock becomes bad, UBI uses these + reserved physical eraseblocks to relocate the bad one. This + configuration option specifies how many physical eraseblocks will be + reserved for bad eraseblock handling (percents of total number of + good physical eraseblocks on this MTD partition). If the underlying + flash does not admit of bad eraseblocks (e.g. NOR flash), this value + is ignored and nothing is reserved. Leave the default value if + unsure. + +config MTD_UBI_BEB_LIMIT + int "Percentage of maximum expected bad eraseblocks" + default 2 + range 0 25 + help + This option specifies the maximum bad physical eraseblocks UBI + expects on the UBI device (percents of total number of physical + eraseblocks on this MTD partition). If the underlying flash does not + admit of bad eraseblocks (e.g. NOR flash), this value is ignored. + Leave the default value if unsure. config MTD_UBI_GLUEBI tristate "MTD devices emulation driver (gluebi)" diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 3174dd40095..ce311aa75a7 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -607,8 +607,18 @@ static int io_init(struct ubi_device *ubi) ubi->peb_count = mtd_div_by_eb(ubi->mtd->size, ubi->mtd); ubi->flash_size = ubi->mtd->size; - if (mtd_can_have_bb(ubi->mtd)) + if (mtd_can_have_bb(ubi->mtd)) { ubi->bad_allowed = 1; + if (CONFIG_MTD_UBI_BEB_LIMIT > 0) { + int percent = CONFIG_MTD_UBI_BEB_LIMIT; + int limit = mult_frac(ubi->peb_count, percent, 100); + + /* Round it up */ + if (mult_frac(limit, 100, percent) < ubi->peb_count) + limit += 1; + ubi->bad_peb_limit = limit; + } + } if (ubi->mtd->type == MTD_NORFLASH) { ubi_assert(ubi->mtd->writesize == 1); diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index 84f66e3fa05..aeb459eb7e4 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -363,6 +363,7 @@ struct ubi_wl_entry; * @flash_size: underlying MTD device size (in bytes) * @peb_count: count of physical eraseblocks on the MTD device * @peb_size: physical eraseblock size + * @bad_peb_limit: top limit of expected bad physical eraseblocks * @bad_peb_count: count of bad physical eraseblocks * @good_peb_count: count of good physical eraseblocks * @corr_peb_count: count of corrupted physical eraseblocks (preserved and not @@ -410,6 +411,7 @@ struct ubi_device { int avail_pebs; int beb_rsvd_pebs; int beb_rsvd_level; + int bad_peb_limit; int autoresize_vol_id; int vtbl_slots; -- cgit v1.2.3 From 37f758a036da56c7cff81b68d1d872752079eb6c Mon Sep 17 00:00:00 2001 From: Shmulik Ladkani Date: Wed, 4 Jul 2012 11:06:01 +0300 Subject: UBI: limit amount of reserved eraseblocks for bad PEB handling The existing mechanism of reserving PEBs for bad PEB handling has two flaws: - It is calculated as a percentage of good PEBs instead of total PEBs. - There's no limit on the amount of PEBs UBI reserves for future bad eraseblock handling. This patch changes the mechanism to overcome these flaws. The desired level of PEBs reserved for bad PEB handling (beb_rsvd_level) is set to the maximum expected bad eraseblocks (bad_peb_limit) minus the existing number of bad eraseblocks (bad_peb_count). The actual amount of PEBs reserved for bad PEB handling is usually set to the desired level (but in some circumstances may be lower than the desired level, e.g. when attaching to a device that has too few available PEBs to satisfy the desired level). In the case where the device has too many bad PEBs (above the expected limit), then the desired level, and the actual amount of PEBs reserved are set to zero. No PEBs will be set aside for future bad eraseblock handling - even if some PEBs are made available (e.g. by shrinking a volume). If another PEB goes bad, and there are available PEBs, then the eraseblock will be marked bad (consuming one available PEB). But if there are no available PEBs, ubi will go into readonly mode. Signed-off-by: Shmulik Ladkani --- drivers/mtd/ubi/misc.c | 16 ++++++++++++---- drivers/mtd/ubi/wl.c | 46 +++++++++++++++++++++++++++++----------------- 2 files changed, 41 insertions(+), 21 deletions(-) (limited to 'drivers/mtd/ubi') diff --git a/drivers/mtd/ubi/misc.c b/drivers/mtd/ubi/misc.c index 8bbfb444b89..d089df05548 100644 --- a/drivers/mtd/ubi/misc.c +++ b/drivers/mtd/ubi/misc.c @@ -121,10 +121,18 @@ void ubi_update_reserved(struct ubi_device *ubi) */ void ubi_calculate_reserved(struct ubi_device *ubi) { - ubi->beb_rsvd_level = ubi->good_peb_count/100; - ubi->beb_rsvd_level *= CONFIG_MTD_UBI_BEB_RESERVE; - if (ubi->beb_rsvd_level < MIN_RESEVED_PEBS) - ubi->beb_rsvd_level = MIN_RESEVED_PEBS; + /* + * Calculate the actual number of PEBs currently needed to be reserved + * for future bad eraseblock handling. + */ + ubi->beb_rsvd_level = ubi->bad_peb_limit - ubi->bad_peb_count; + if (ubi->beb_rsvd_level < 0) { + ubi->beb_rsvd_level = 0; + ubi_warn("number of bad PEBs (%d) is above the expected limit " + "(%d), not reserving any PEBs for bad PEB handling, " + "will use available PEBs (if any)", + ubi->bad_peb_count, ubi->bad_peb_limit); + } } /** diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index b6be644e7b8..bd05276252f 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -978,9 +978,10 @@ static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk, int cancel) { struct ubi_wl_entry *e = wl_wrk->e; - int pnum = e->pnum, err, need; + int pnum = e->pnum; int vol_id = wl_wrk->vol_id; int lnum = wl_wrk->lnum; + int err, available_consumed = 0; if (cancel) { dbg_wl("cancel erasure of PEB %d EC %d", pnum, e->ec); @@ -1045,20 +1046,14 @@ static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk, } spin_lock(&ubi->volumes_lock); - need = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs + 1; - if (need > 0) { - need = ubi->avail_pebs >= need ? need : ubi->avail_pebs; - ubi->avail_pebs -= need; - ubi->rsvd_pebs += need; - ubi->beb_rsvd_pebs += need; - if (need > 0) - ubi_msg("reserve more %d PEBs", need); - } - if (ubi->beb_rsvd_pebs == 0) { - spin_unlock(&ubi->volumes_lock); - ubi_err("no reserved physical eraseblocks"); - goto out_ro; + if (ubi->avail_pebs == 0) { + spin_unlock(&ubi->volumes_lock); + ubi_err("no reserved/available physical eraseblocks"); + goto out_ro; + } + ubi->avail_pebs -= 1; + available_consumed = 1; } spin_unlock(&ubi->volumes_lock); @@ -1068,19 +1063,36 @@ static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk, goto out_ro; spin_lock(&ubi->volumes_lock); - ubi->beb_rsvd_pebs -= 1; + if (ubi->beb_rsvd_pebs > 0) { + if (available_consumed) { + /* + * The amount of reserved PEBs increased since we last + * checked. + */ + ubi->avail_pebs += 1; + available_consumed = 0; + } + ubi->beb_rsvd_pebs -= 1; + } ubi->bad_peb_count += 1; ubi->good_peb_count -= 1; ubi_calculate_reserved(ubi); - if (ubi->beb_rsvd_pebs) + if (available_consumed) + ubi_warn("no PEBs in the reserved pool, used an available PEB"); + else if (ubi->beb_rsvd_pebs) ubi_msg("%d PEBs left in the reserve", ubi->beb_rsvd_pebs); else - ubi_warn("last PEB from the reserved pool was used"); + ubi_warn("last PEB from the reserve was used"); spin_unlock(&ubi->volumes_lock); return err; out_ro: + if (available_consumed) { + spin_lock(&ubi->volumes_lock); + ubi->avail_pebs += 1; + spin_unlock(&ubi->volumes_lock); + } ubi_ro_mode(ubi); return err; } -- cgit v1.2.3 From 1b2a5790613756d54fdf58d0b3965e43735f153b Mon Sep 17 00:00:00 2001 From: Shmulik Ladkani Date: Wed, 4 Jul 2012 11:06:02 +0300 Subject: UBI: kill CONFIG_MTD_UBI_BEB_RESERVE CONFIG_MTD_UBI_BEB_RESERVE and MIN_RESEVED_PEBS are no longer used, since the amount of reserved eraseblocks for bad PEB handling is now derived from 'ubi->bad_peb_limit' (ubi's maximum expected bad eraseblocks). Signed-off-by: Shmulik Ladkani Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/Kconfig | 16 ---------------- drivers/mtd/ubi/ubi.h | 3 --- 2 files changed, 19 deletions(-) (limited to 'drivers/mtd/ubi') diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig index 76195ac90e5..b2f4f0f032f 100644 --- a/drivers/mtd/ubi/Kconfig +++ b/drivers/mtd/ubi/Kconfig @@ -27,22 +27,6 @@ config MTD_UBI_WL_THRESHOLD life-cycle less than 10000, the threshold should be lessened (e.g., to 128 or 256, although it does not have to be power of 2). -config MTD_UBI_BEB_RESERVE - int "Percentage of reserved eraseblocks for bad eraseblocks handling" - default 2 - range 0 25 - help - If the MTD device admits of bad eraseblocks (e.g. NAND flash), UBI - reserves some amount of physical eraseblocks to handle new bad - eraseblocks. When a physical eraseblock becomes bad, UBI uses these - reserved physical eraseblocks to relocate the bad one. This - configuration option specifies how many physical eraseblocks will be - reserved for bad eraseblock handling (percents of total number of - good physical eraseblocks on this MTD partition). If the underlying - flash does not admit of bad eraseblocks (e.g. NOR flash), this value - is ignored and nothing is reserved. Leave the default value if - unsure. - config MTD_UBI_BEB_LIMIT int "Percentage of maximum expected bad eraseblocks" default 2 diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index aeb459eb7e4..c94612e67c4 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -59,9 +59,6 @@ #define ubi_err(fmt, ...) printk(KERN_ERR "UBI error: %s: " fmt "\n", \ __func__, ##__VA_ARGS__) -/* Lowest number PEBs reserved for bad PEB handling */ -#define MIN_RESEVED_PEBS 2 - /* Background thread name pattern */ #define UBI_BGT_NAME_PATTERN "ubi_bgt%dd" -- cgit v1.2.3 From ba4087e956d336488c6df9dfca65d1e70cf480f1 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Tue, 10 Jul 2012 18:23:41 +0200 Subject: UBI: use the whole MTD device size to get bad_peb_limit On NAND flash devices, UBI reserves some physical erase blocks (PEB) for bad block handling. Today, the number of reserved PEB can only be set as a percentage of the total number of PEB in each MTD partition. For example, for a NAND flash with 128KiB PEB, 2 MTD partition of 20MiB (mtd0) and 100MiB (mtd1) and 2% reserved PEB: - the UBI device on mtd0 will have 2 PEB reserved - the UBI device on mtd1 will have 16 PEB reserved The problem with this behaviour is that NAND flash manufacturers give a minimum number of valid block (NVB) during the endurance life of the device, e.g.: Parameter Symbol Min Max Unit Notes -------------------------------------------------------------- Valid block number NVB 1004 1024 Blocks 1 From this number we can deduce the maximum number of bad PEB that a device will contain during its endurance life: a 128MiB NAND flash (1024 PEB) will not have less than 20 bad blocks during the flash endurance life. But the manufacturer doesn't tell where those bad block will appear. He doesn't say either if they will be equally disposed on the whole device (and I'm pretty sure they won't). So, according to the datasheets, we should reserve the maximum number of bad PEB for each UBI device (worst case scenario: 20 bad blocks appears on the smallest MTD partition). So this patch make UBI use the whole MTD device size to calculate the maximum bad expected eraseblocks. The Kconfig option is in per1024 blocks, thus it can have a default value of 20 which is *very* common for NAND devices. Signed-off-by: Richard Genoud Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/Kconfig | 27 +++++++++++++++++++++------ drivers/mtd/ubi/build.c | 21 ++++++++++++++++++--- 2 files changed, 39 insertions(+), 9 deletions(-) (limited to 'drivers/mtd/ubi') diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig index b2f4f0f032f..dcbaae3ead6 100644 --- a/drivers/mtd/ubi/Kconfig +++ b/drivers/mtd/ubi/Kconfig @@ -28,14 +28,29 @@ config MTD_UBI_WL_THRESHOLD to 128 or 256, although it does not have to be power of 2). config MTD_UBI_BEB_LIMIT - int "Percentage of maximum expected bad eraseblocks" - default 2 - range 0 25 + int "Maximum expected bad eraseblock count per 1024 eraseblocks" + default 20 + range 0 768 help This option specifies the maximum bad physical eraseblocks UBI - expects on the UBI device (percents of total number of physical - eraseblocks on this MTD partition). If the underlying flash does not - admit of bad eraseblocks (e.g. NOR flash), this value is ignored. + expects on the MTD device (per 1024 eraseblocks). If the underlying + flash does not admit of bad eraseblocks (e.g. NOR flash), this value + is ignored. + + NAND datasheets often specify the minimum and maximum NVM (Number of + Valid Blocks) for the flashes' endurance lifetime. The maximum + expected bad eraseblocks per 1024 eraseblocks then can be calculated + as "1024 * (1 - MinNVB / MaxNVB)", which gives 20 for most NANDs + (MaxNVB is basically the total count of eraseblocks on the chip). + + To put it differently, if this value is 20, UBI will try to reserve + about 1.9% of physical eraseblocks for bad blocks handling. And that + will be 1.9% of eraseblocks on the entire NAND chip, not just the MTD + partition UBI attaches. This means that if you have, say, a NAND + flash chip admits maximum 40 bad eraseblocks, and it is split on two + MTD partitions of the same size, UBI will reserve 40 eraseblocks when + attaching a partition. + Leave the default value if unsure. config MTD_UBI_GLUEBI diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index ce311aa75a7..9980441a888 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include #include @@ -610,11 +611,25 @@ static int io_init(struct ubi_device *ubi) if (mtd_can_have_bb(ubi->mtd)) { ubi->bad_allowed = 1; if (CONFIG_MTD_UBI_BEB_LIMIT > 0) { - int percent = CONFIG_MTD_UBI_BEB_LIMIT; - int limit = mult_frac(ubi->peb_count, percent, 100); + int per1024 = CONFIG_MTD_UBI_BEB_LIMIT; + int limit, device_pebs; + uint64_t device_size; + + /* + * Here we are using size of the entire flash chip and + * not just the MTD partition size because the maximum + * number of bad eraseblocks is a percentage of the + * whole device and bad eraseblocks are not fairly + * distributed over the flash chip. So the worst case + * is that all the bad eraseblocks of the chip are in + * the MTD partition we are attaching (ubi->mtd). + */ + device_size = mtd_get_device_size(ubi->mtd); + device_pebs = mtd_div_by_eb(device_size, ubi->mtd); + limit = mult_frac(device_pebs, per1024, 1024); /* Round it up */ - if (mult_frac(limit, 100, percent) < ubi->peb_count) + if (mult_frac(limit, 1024, per1024) < device_pebs) limit += 1; ubi->bad_peb_limit = limit; } -- cgit v1.2.3 From 95e6fb027e041641baed441fcbd27c2f082c760e Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Fri, 17 Aug 2012 16:35:18 +0200 Subject: UBI: separate bad_peb_limit in a function No functional changes here, just to prepare for next patch. Signed-off-by: Richard Genoud Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/build.c | 54 ++++++++++++++++++++++++++++--------------------- 1 file changed, 31 insertions(+), 23 deletions(-) (limited to 'drivers/mtd/ubi') diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 9980441a888..c17f8e03abc 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -565,6 +565,34 @@ void ubi_free_internal_volumes(struct ubi_device *ubi) } } +static int get_bad_peb_limit(const struct ubi_device *ubi, int max_beb_per1024) +{ + int limit, device_pebs; + uint64_t device_size; + + if (!max_beb_per1024) + return 0; + + /* + * Here we are using size of the entire flash chip and + * not just the MTD partition size because the maximum + * number of bad eraseblocks is a percentage of the + * whole device and bad eraseblocks are not fairly + * distributed over the flash chip. So the worst case + * is that all the bad eraseblocks of the chip are in + * the MTD partition we are attaching (ubi->mtd). + */ + device_size = mtd_get_device_size(ubi->mtd); + device_pebs = mtd_div_by_eb(device_size, ubi->mtd); + limit = mult_frac(device_pebs, max_beb_per1024, 1024); + + /* Round it up */ + if (mult_frac(limit, 1024, max_beb_per1024) < device_pebs) + limit += 1; + + return limit; +} + /** * io_init - initialize I/O sub-system for a given UBI device. * @ubi: UBI device description object @@ -582,6 +610,8 @@ void ubi_free_internal_volumes(struct ubi_device *ubi) */ static int io_init(struct ubi_device *ubi) { + const int max_beb_per1024 = CONFIG_MTD_UBI_BEB_LIMIT; + if (ubi->mtd->numeraseregions != 0) { /* * Some flashes have several erase regions. Different regions @@ -610,29 +640,7 @@ static int io_init(struct ubi_device *ubi) if (mtd_can_have_bb(ubi->mtd)) { ubi->bad_allowed = 1; - if (CONFIG_MTD_UBI_BEB_LIMIT > 0) { - int per1024 = CONFIG_MTD_UBI_BEB_LIMIT; - int limit, device_pebs; - uint64_t device_size; - - /* - * Here we are using size of the entire flash chip and - * not just the MTD partition size because the maximum - * number of bad eraseblocks is a percentage of the - * whole device and bad eraseblocks are not fairly - * distributed over the flash chip. So the worst case - * is that all the bad eraseblocks of the chip are in - * the MTD partition we are attaching (ubi->mtd). - */ - device_size = mtd_get_device_size(ubi->mtd); - device_pebs = mtd_div_by_eb(device_size, ubi->mtd); - limit = mult_frac(device_pebs, per1024, 1024); - - /* Round it up */ - if (mult_frac(limit, 1024, per1024) < device_pebs) - limit += 1; - ubi->bad_peb_limit = limit; - } + ubi->bad_peb_limit = get_bad_peb_limit(ubi, max_beb_per1024); } if (ubi->mtd->type == MTD_NORFLASH) { -- cgit v1.2.3 From 5993f9b7380d77fd23f5402dcfb701aedb327ffe Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Fri, 17 Aug 2012 16:35:19 +0200 Subject: UBI: introduce MTD_PARAM_MAX_COUNT Signed-off-by: Richard Genoud Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/build.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers/mtd/ubi') diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index c17f8e03abc..5877531f226 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -46,6 +46,9 @@ /* Maximum length of the 'mtd=' parameter */ #define MTD_PARAM_LEN_MAX 64 +/* Maximum number of comma-separated items in the 'mtd=' parameter */ +#define MTD_PARAM_MAX_COUNT 2 + #ifdef CONFIG_MTD_UBI_MODULE #define ubi_is_module() 1 #else @@ -1324,7 +1327,7 @@ static int __init ubi_mtd_param_parse(const char *val, struct kernel_param *kp) struct mtd_dev_param *p; char buf[MTD_PARAM_LEN_MAX]; char *pbuf = &buf[0]; - char *tokens[2] = {NULL, NULL}; + char *tokens[MTD_PARAM_MAX_COUNT]; if (!val) return -EINVAL; @@ -1354,7 +1357,7 @@ static int __init ubi_mtd_param_parse(const char *val, struct kernel_param *kp) if (buf[len - 1] == '\n') buf[len - 1] = '\0'; - for (i = 0; i < 2; i++) + for (i = 0; i < MTD_PARAM_MAX_COUNT; i++) tokens[i] = strsep(&pbuf, ","); if (pbuf) { -- cgit v1.2.3 From 256334c3191af9d9e520082db9beb75ff801d86c Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Mon, 20 Aug 2012 18:00:11 +0200 Subject: UBI: prepare for max_beb_per1024 module parameter addition This patch prepare the way for the addition of max_beb_per1024 module parameter. There's no functional change. Signed-off-by: Richard Genoud Reviewed-by: Shmulik Ladkani Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/build.c | 14 ++++++++------ drivers/mtd/ubi/cdev.c | 3 ++- drivers/mtd/ubi/ubi.h | 3 ++- 3 files changed, 12 insertions(+), 8 deletions(-) (limited to 'drivers/mtd/ubi') diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 5877531f226..8a4eb7c3e0f 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -599,6 +599,7 @@ static int get_bad_peb_limit(const struct ubi_device *ubi, int max_beb_per1024) /** * io_init - initialize I/O sub-system for a given UBI device. * @ubi: UBI device description object + * @max_beb_per1024: maximum expected number of bad PEB per 1024 PEBs * * If @ubi->vid_hdr_offset or @ubi->leb_start is zero, default offsets are * assumed: @@ -611,10 +612,8 @@ static int get_bad_peb_limit(const struct ubi_device *ubi, int max_beb_per1024) * This function returns zero in case of success and a negative error code in * case of failure. */ -static int io_init(struct ubi_device *ubi) +static int io_init(struct ubi_device *ubi, int max_beb_per1024) { - const int max_beb_per1024 = CONFIG_MTD_UBI_BEB_LIMIT; - if (ubi->mtd->numeraseregions != 0) { /* * Some flashes have several erase regions. Different regions @@ -836,6 +835,7 @@ static int autoresize(struct ubi_device *ubi, int vol_id) * @mtd: MTD device description object * @ubi_num: number to assign to the new UBI device * @vid_hdr_offset: VID header offset + * @max_beb_per1024: maximum number of expected bad blocks per 1024 PEBs * * This function attaches MTD device @mtd_dev to UBI and assign @ubi_num number * to the newly created UBI device, unless @ubi_num is %UBI_DEV_NUM_AUTO, in @@ -846,7 +846,8 @@ static int autoresize(struct ubi_device *ubi, int vol_id) * Note, the invocations of this function has to be serialized by the * @ubi_devices_mutex. */ -int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset) +int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, + int vid_hdr_offset, int max_beb_per1024) { struct ubi_device *ubi; int i, err, ref = 0; @@ -919,7 +920,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset) dbg_msg("sizeof(struct ubi_ainf_peb) %zu", sizeof(struct ubi_ainf_peb)); dbg_msg("sizeof(struct ubi_wl_entry) %zu", sizeof(struct ubi_wl_entry)); - err = io_init(ubi); + err = io_init(ubi, max_beb_per1024); if (err) goto out_free; @@ -1208,7 +1209,8 @@ static int __init ubi_init(void) mutex_lock(&ubi_devices_mutex); err = ubi_attach_mtd_dev(mtd, UBI_DEV_NUM_AUTO, - p->vid_hdr_offs); + p->vid_hdr_offs, + CONFIG_MTD_UBI_BEB_LIMIT); mutex_unlock(&ubi_devices_mutex); if (err < 0) { ubi_err("cannot attach mtd%d", mtd->index); diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index fb556787818..619f9144f99 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -1010,7 +1010,8 @@ static long ctrl_cdev_ioctl(struct file *file, unsigned int cmd, * 'ubi_attach_mtd_dev()'. */ mutex_lock(&ubi_devices_mutex); - err = ubi_attach_mtd_dev(mtd, req.ubi_num, req.vid_hdr_offset); + err = ubi_attach_mtd_dev(mtd, req.ubi_num, req.vid_hdr_offset, + CONFIG_MTD_UBI_BEB_LIMIT); mutex_unlock(&ubi_devices_mutex); if (err < 0) put_mtd_device(mtd); diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index c94612e67c4..2a2475b9ec5 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -693,7 +693,8 @@ int ubi_io_write_vid_hdr(struct ubi_device *ubi, int pnum, struct ubi_vid_hdr *vid_hdr); /* build.c */ -int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset); +int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, + int vid_hdr_offset, int max_beb_per1024); int ubi_detach_mtd_dev(int ubi_num, int anyway); struct ubi_device *ubi_get_device(int ubi_num); void ubi_put_device(struct ubi_device *ubi); -- cgit v1.2.3 From d2f588f9340ed23dfb6cda08b8a1917ef3e8527c Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Mon, 20 Aug 2012 18:00:13 +0200 Subject: UBI: check max_beb_per1024 value in ubi_attach_mtd_dev max_beb_per1024 shouldn't be negative, and a 0 value will be treated as the default value. For the upper bound, 768/1024 should be enough. Signed-off-by: Richard Genoud Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/build.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/mtd/ubi') diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 8a4eb7c3e0f..3700bf77b0b 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -49,6 +49,9 @@ /* Maximum number of comma-separated items in the 'mtd=' parameter */ #define MTD_PARAM_MAX_COUNT 2 +/* Maximum value for the number of bad PEBs per 1024 PEBs */ +#define MAX_MTD_UBI_BEB_LIMIT 768 + #ifdef CONFIG_MTD_UBI_MODULE #define ubi_is_module() 1 #else @@ -852,6 +855,12 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, struct ubi_device *ubi; int i, err, ref = 0; + if (max_beb_per1024 < 0 || max_beb_per1024 > MAX_MTD_UBI_BEB_LIMIT) + return -EINVAL; + + if (!max_beb_per1024) + max_beb_per1024 = CONFIG_MTD_UBI_BEB_LIMIT; + /* * Check if we already have the same MTD device attached. * -- cgit v1.2.3 From edac493dfb48fe46d43fe6afabb8cfb2d1d4c048 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Mon, 20 Aug 2012 18:00:14 +0200 Subject: UBI: allow specifying bad PEBs limit using module parameter This patch provides the possibility to adjust the "maximum expected number of bad blocks per 1024 blocks" (max_beb_per1024) for each mtd device. The majority of NAND devices have their max_beb_per1024 equal to 20, but sometimes it's more. Now, we can adjust that via a kernel parameter: ubi.mtd=[,[,max_beb_per1024]] Signed-off-by: Richard Genoud Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/Kconfig | 2 ++ drivers/mtd/ubi/build.c | 40 +++++++++++++++++++++++++--------------- 2 files changed, 27 insertions(+), 15 deletions(-) (limited to 'drivers/mtd/ubi') diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig index dcbaae3ead6..3e185e46cf6 100644 --- a/drivers/mtd/ubi/Kconfig +++ b/drivers/mtd/ubi/Kconfig @@ -51,6 +51,8 @@ config MTD_UBI_BEB_LIMIT MTD partitions of the same size, UBI will reserve 40 eraseblocks when attaching a partition. + This option can be overridden by the "mtd=" UBI module parameter. + Leave the default value if unsure. config MTD_UBI_GLUEBI diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 3700bf77b0b..355756bd37a 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -47,7 +47,7 @@ #define MTD_PARAM_LEN_MAX 64 /* Maximum number of comma-separated items in the 'mtd=' parameter */ -#define MTD_PARAM_MAX_COUNT 2 +#define MTD_PARAM_MAX_COUNT 3 /* Maximum value for the number of bad PEBs per 1024 PEBs */ #define MAX_MTD_UBI_BEB_LIMIT 768 @@ -63,10 +63,12 @@ * @name: MTD character device node path, MTD device name, or MTD device number * string * @vid_hdr_offs: VID header offset + * @max_beb_per1024: maximum expected number of bad PEBs per 1024 PEBs */ struct mtd_dev_param { char name[MTD_PARAM_LEN_MAX]; int vid_hdr_offs; + int max_beb_per1024; }; /* Numbers of elements set in the @mtd_dev_param array */ @@ -838,7 +840,7 @@ static int autoresize(struct ubi_device *ubi, int vol_id) * @mtd: MTD device description object * @ubi_num: number to assign to the new UBI device * @vid_hdr_offset: VID header offset - * @max_beb_per1024: maximum number of expected bad blocks per 1024 PEBs + * @max_beb_per1024: maximum expected number of bad PEB per 1024 PEBs * * This function attaches MTD device @mtd_dev to UBI and assign @ubi_num number * to the newly created UBI device, unless @ubi_num is %UBI_DEV_NUM_AUTO, in @@ -1218,8 +1220,7 @@ static int __init ubi_init(void) mutex_lock(&ubi_devices_mutex); err = ubi_attach_mtd_dev(mtd, UBI_DEV_NUM_AUTO, - p->vid_hdr_offs, - CONFIG_MTD_UBI_BEB_LIMIT); + p->vid_hdr_offs, p->max_beb_per1024); mutex_unlock(&ubi_devices_mutex); if (err < 0) { ubi_err("cannot attach mtd%d", mtd->index); @@ -1386,23 +1387,32 @@ static int __init ubi_mtd_param_parse(const char *val, struct kernel_param *kp) if (p->vid_hdr_offs < 0) return p->vid_hdr_offs; + if (tokens[2]) { + int err = kstrtoint(tokens[2], 10, &p->max_beb_per1024); + + if (err) { + printk(KERN_ERR "UBI error: bad value for " + "max_beb_per1024 parameter: %s", tokens[2]); + return -EINVAL; + } + } + mtd_devs += 1; return 0; } module_param_call(mtd, ubi_mtd_param_parse, NULL, NULL, 000); -MODULE_PARM_DESC(mtd, "MTD devices to attach. Parameter format: " - "mtd=[,].\n" +MODULE_PARM_DESC(mtd, "MTD devices to attach. Parameter format: mtd=[,[,max_beb_per1024]].\n" "Multiple \"mtd\" parameters may be specified.\n" - "MTD devices may be specified by their number, name, or " - "path to the MTD character device node.\n" - "Optional \"vid_hdr_offs\" parameter specifies UBI VID " - "header position to be used by UBI.\n" - "Example 1: mtd=/dev/mtd0 - attach MTD device " - "/dev/mtd0.\n" - "Example 2: mtd=content,1984 mtd=4 - attach MTD device " - "with name \"content\" using VID header offset 1984, and " - "MTD device number 4 with default VID header offset."); + "MTD devices may be specified by their number, name, or path to the MTD character device node.\n" + "Optional \"vid_hdr_offs\" parameter specifies UBI VID header position to be used by UBI. (default value if 0)\n" + "Optional \"max_beb_per1024\" parameter specifies the maximum expected bad eraseblock per 1024 eraseblocks. (default value (" + __stringify(CONFIG_MTD_UBI_BEB_LIMIT) ") if 0)\n" + "\n" + "Example 1: mtd=/dev/mtd0 - attach MTD device /dev/mtd0.\n" + "Example 2: mtd=content,1984 mtd=4 - attach MTD device with name \"content\" using VID header offset 1984, and MTD device number 4 with default VID header offset.\n" + "Example 3: mtd=/dev/mtd1,0,25 - attach MTD device /dev/mtd1 using default VID header offset and reserve 25*nand_size_in_blocks/1024 erase blocks for bad block handling.\n" + "\t(e.g. if the NAND *chipset* has 4096 PEB, 100 will be reserved for this UBI device)."); MODULE_VERSION(__stringify(UBI_VERSION)); MODULE_DESCRIPTION("UBI - Unsorted Block Images"); -- cgit v1.2.3 From db7e21c21f293d52f5363fe8d9ee91d6bd0a503a Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Mon, 20 Aug 2012 18:00:15 +0200 Subject: UBI: add max_beb_per1024 to attach ioctl This patch provides a possibility to set the "maximum expected number of bad blocks per 1024 blocks" (max_beb_per1024) for each mtd device using the UBI_IOCATT ioctl. Signed-off-by: Richard Genoud Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/Kconfig | 3 ++- drivers/mtd/ubi/cdev.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/mtd/ubi') diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig index 3e185e46cf6..271a842f8c3 100644 --- a/drivers/mtd/ubi/Kconfig +++ b/drivers/mtd/ubi/Kconfig @@ -51,7 +51,8 @@ config MTD_UBI_BEB_LIMIT MTD partitions of the same size, UBI will reserve 40 eraseblocks when attaching a partition. - This option can be overridden by the "mtd=" UBI module parameter. + This option can be overridden by the "mtd=" UBI module parameter or + by the "attach" ioctl. Leave the default value if unsure. diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index 619f9144f99..7885dc0934c 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -1011,7 +1011,7 @@ static long ctrl_cdev_ioctl(struct file *file, unsigned int cmd, */ mutex_lock(&ubi_devices_mutex); err = ubi_attach_mtd_dev(mtd, req.ubi_num, req.vid_hdr_offset, - CONFIG_MTD_UBI_BEB_LIMIT); + req.max_beb_per1024); mutex_unlock(&ubi_devices_mutex); if (err < 0) put_mtd_device(mtd); -- cgit v1.2.3 From abb3e01103eb4e2ea5c15e6fedbc74e08bd4cc2b Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Sat, 18 Aug 2012 14:11:42 +0200 Subject: UBI: fix autoresize handling in R/O mode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently UBI fails in autoresize when it is in R/O mode (e.g., because the underlying MTD device is R/O). This patch fixes the issue - we just skip autoresize and print a warning. Reported-by: Pali Rohár Cc: stable@vger.kernel.org Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/build.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/mtd/ubi') diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 355756bd37a..89660881aa3 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -799,6 +799,11 @@ static int autoresize(struct ubi_device *ubi, int vol_id) struct ubi_volume *vol = ubi->volumes[vol_id]; int err, old_reserved_pebs = vol->reserved_pebs; + if (ubi->ro_mode) { + ubi_warn("skip auto-resize because of R/O mode"); + return 0; + } + /* * Clear the auto-resize flag in the volume in-memory copy of the * volume table, and 'ubi_resize_volume()' will propagate this change -- cgit v1.2.3 From 193819cf2e6e395b1e1be2d36785dc5563a6edca Mon Sep 17 00:00:00 2001 From: Matthieu CASTET Date: Wed, 22 Aug 2012 16:03:46 +0200 Subject: UBI: erase free PEB with bitflip in EC header Without this patch, these PEB are not scrubbed until we put data in them. Bitflip can accumulate latter and we can loose the EC header (but VID header should be intact and allow to recover data). Signed-off-by: Matthieu Castet Cc: stable@vger.kernel.org Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/attach.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mtd/ubi') diff --git a/drivers/mtd/ubi/attach.c b/drivers/mtd/ubi/attach.c index bd27cbbb406..68d4d1f76d1 100644 --- a/drivers/mtd/ubi/attach.c +++ b/drivers/mtd/ubi/attach.c @@ -975,7 +975,7 @@ static int scan_peb(struct ubi_device *ubi, struct ubi_attach_info *ai, return err; goto adjust_mean_ec; case UBI_IO_FF: - if (ec_err) + if (ec_err || bitflips) err = add_to_list(ai, pnum, UBI_UNKNOWN, UBI_UNKNOWN, ec, 1, &ai->erase); else -- cgit v1.2.3 From 049333cecbde11988c49ad4d7861eefbc3534422 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 27 Aug 2012 14:43:54 +0300 Subject: UBI: comply with coding style Join all the split printk lines in order to stop checkpatch complaining. Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/attach.c | 28 ++++++++--------- drivers/mtd/ubi/build.c | 22 +++++++------- drivers/mtd/ubi/cdev.c | 9 +++--- drivers/mtd/ubi/debug.c | 4 +-- drivers/mtd/ubi/eba.c | 33 ++++++++++---------- drivers/mtd/ubi/gluebi.c | 28 ++++++++--------- drivers/mtd/ubi/io.c | 78 +++++++++++++++++++++++------------------------- drivers/mtd/ubi/misc.c | 4 +-- drivers/mtd/ubi/vtbl.c | 8 ++--- 9 files changed, 101 insertions(+), 113 deletions(-) (limited to 'drivers/mtd/ubi') diff --git a/drivers/mtd/ubi/attach.c b/drivers/mtd/ubi/attach.c index 68d4d1f76d1..d8e92b6a33f 100644 --- a/drivers/mtd/ubi/attach.c +++ b/drivers/mtd/ubi/attach.c @@ -378,8 +378,8 @@ static int compare_lebs(struct ubi_device *ubi, const struct ubi_ainf_peb *aeb, if (err == UBI_IO_BITFLIPS) bitflips = 1; else { - ubi_err("VID of PEB %d header is bad, but it " - "was OK earlier, err %d", pnum, err); + ubi_err("VID of PEB %d header is bad, but it was OK earlier, err %d", + pnum, err); if (err > 0) err = -EIO; @@ -790,9 +790,9 @@ static int check_corruption(struct ubi_device *ubi, struct ubi_vid_hdr *vid_hdr, if (ubi_check_pattern(ubi->peb_buf, 0xFF, ubi->leb_size)) goto out_unlock; - ubi_err("PEB %d contains corrupted VID header, and the data does not " - "contain all 0xFF, this may be a non-UBI PEB or a severe VID " - "header corruption which requires manual inspection", pnum); + ubi_err("PEB %d contains corrupted VID header, and the data does not contain all 0xFF", + pnum); + ubi_err("this may be a non-UBI PEB or a severe VID header corruption which requires manual inspection"); ubi_dump_vid_hdr(vid_hdr); dbg_msg("hexdump of PEB %d offset %d, length %d", pnum, ubi->leb_start, ubi->leb_size); @@ -907,8 +907,8 @@ static int scan_peb(struct ubi_device *ubi, struct ubi_attach_info *ai, ubi->image_seq = image_seq; if (ubi->image_seq && image_seq && ubi->image_seq != image_seq) { - ubi_err("bad image sequence number %d in PEB %d, " - "expected %d", image_seq, pnum, ubi->image_seq); + ubi_err("bad image sequence number %d in PEB %d, expected %d", + image_seq, pnum, ubi->image_seq); ubi_dump_ec_hdr(ech); return -EINVAL; } @@ -997,8 +997,8 @@ static int scan_peb(struct ubi_device *ubi, struct ubi_attach_info *ai, /* Unsupported internal volume */ switch (vidh->compat) { case UBI_COMPAT_DELETE: - ubi_msg("\"delete\" compatible internal volume %d:%d" - " found, will remove it", vol_id, lnum); + ubi_msg("\"delete\" compatible internal volume %d:%d found, will remove it", + vol_id, lnum); err = add_to_list(ai, pnum, vol_id, lnum, ec, 1, &ai->erase); if (err) @@ -1006,15 +1006,14 @@ static int scan_peb(struct ubi_device *ubi, struct ubi_attach_info *ai, return 0; case UBI_COMPAT_RO: - ubi_msg("read-only compatible internal volume %d:%d" - " found, switch to read-only mode", + ubi_msg("read-only compatible internal volume %d:%d found, switch to read-only mode", vol_id, lnum); ubi->ro_mode = 1; break; case UBI_COMPAT_PRESERVE: - ubi_msg("\"preserve\" compatible internal volume %d:%d" - " found", vol_id, lnum); + ubi_msg("\"preserve\" compatible internal volume %d:%d found", + vol_id, lnum); err = add_to_list(ai, pnum, vol_id, lnum, ec, 0, &ai->alien); if (err) @@ -1112,8 +1111,7 @@ static int late_analysis(struct ubi_device *ubi, struct ubi_attach_info *ai) get_random_bytes(&ubi->image_seq, sizeof(ubi->image_seq)); } else { - ubi_err("MTD device is not UBI-formatted and possibly " - "contains non-UBI data - refusing it"); + ubi_err("MTD device is not UBI-formatted and possibly contains non-UBI data - refusing it"); return -EINVAL; } diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 89660881aa3..dd9bc0a5cc3 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -748,16 +748,15 @@ static int io_init(struct ubi_device *ubi, int max_beb_per1024) * read-only mode. */ if (ubi->vid_hdr_offset + UBI_VID_HDR_SIZE <= ubi->hdrs_min_io_size) { - ubi_warn("EC and VID headers are in the same minimal I/O unit, " - "switch to read-only mode"); + ubi_warn("EC and VID headers are in the same minimal I/O unit, switch to read-only mode"); ubi->ro_mode = 1; } ubi->leb_size = ubi->peb_size - ubi->leb_start; if (!(ubi->mtd->flags & MTD_WRITEABLE)) { - ubi_msg("MTD device %d is write-protected, attach in " - "read-only mode", ubi->mtd->index); + ubi_msg("MTD device %d is write-protected, attach in read-only mode", + ubi->mtd->index); ubi->ro_mode = 1; } @@ -892,8 +891,8 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, * no sense to attach emulated MTD devices, so we prohibit this. */ if (mtd->type == MTD_UBIVOLUME) { - ubi_err("refuse attaching mtd%d - it is already emulated on " - "top of UBI", mtd->index); + ubi_err("refuse attaching mtd%d - it is already emulated on top of UBI", + mtd->index); return -EINVAL; } @@ -1357,14 +1356,13 @@ static int __init ubi_mtd_param_parse(const char *val, struct kernel_param *kp) len = strnlen(val, MTD_PARAM_LEN_MAX); if (len == MTD_PARAM_LEN_MAX) { - printk(KERN_ERR "UBI error: parameter \"%s\" is too long, " - "max. is %d\n", val, MTD_PARAM_LEN_MAX); + printk(KERN_ERR "UBI error: parameter \"%s\" is too long, max. is %d\n", + val, MTD_PARAM_LEN_MAX); return -EINVAL; } if (len == 0) { - printk(KERN_WARNING "UBI warning: empty 'mtd=' parameter - " - "ignored\n"); + printk(KERN_WARNING "UBI warning: empty 'mtd=' parameter - ignored\n"); return 0; } @@ -1396,8 +1394,8 @@ static int __init ubi_mtd_param_parse(const char *val, struct kernel_param *kp) int err = kstrtoint(tokens[2], 10, &p->max_beb_per1024); if (err) { - printk(KERN_ERR "UBI error: bad value for " - "max_beb_per1024 parameter: %s", tokens[2]); + printk(KERN_ERR "UBI error: bad value for max_beb_per1024 parameter: %s", + tokens[2]); return -EINVAL; } } diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index 7885dc0934c..540d2db492e 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -140,9 +140,9 @@ static int vol_cdev_release(struct inode *inode, struct file *file) vol->updating = 0; vfree(vol->upd_buf); } else if (vol->changing_leb) { - dbg_gen("only %lld of %lld bytes received for atomic LEB change" - " for volume %d:%d, cancel", vol->upd_received, - vol->upd_bytes, vol->ubi->ubi_num, vol->vol_id); + dbg_gen("only %lld of %lld bytes received for atomic LEB change for volume %d:%d, cancel", + vol->upd_received, vol->upd_bytes, vol->ubi->ubi_num, + vol->vol_id); vol->changing_leb = 0; vfree(vol->upd_buf); } @@ -189,7 +189,8 @@ static loff_t vol_cdev_llseek(struct file *file, loff_t offset, int origin) return new_offset; } -static int vol_cdev_fsync(struct file *file, loff_t start, loff_t end, int datasync) +static int vol_cdev_fsync(struct file *file, loff_t start, loff_t end, + int datasync) { struct ubi_volume_desc *desc = file->private_data; struct ubi_device *ubi = desc->vol->ubi; diff --git a/drivers/mtd/ubi/debug.c b/drivers/mtd/ubi/debug.c index 7c138030521..dd97324f3a1 100644 --- a/drivers/mtd/ubi/debug.c +++ b/drivers/mtd/ubi/debug.c @@ -43,8 +43,8 @@ void ubi_dump_flash(struct ubi_device *ubi, int pnum, int offset, int len) return; err = mtd_read(ubi->mtd, addr, len, &read, buf); if (err && err != -EUCLEAN) { - ubi_err("error %d while reading %d bytes from PEB %d:%d, " - "read %zd bytes", err, len, pnum, offset, read); + ubi_err("error %d while reading %d bytes from PEB %d:%d, read %zd bytes", + err, len, pnum, offset, read); goto out; } diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c index b703ac7729c..a26d7d25317 100644 --- a/drivers/mtd/ubi/eba.c +++ b/drivers/mtd/ubi/eba.c @@ -420,9 +420,8 @@ retry: */ if (err == UBI_IO_BAD_HDR_EBADMSG || err == UBI_IO_BAD_HDR) { - ubi_warn("corrupted VID header at PEB " - "%d, LEB %d:%d", pnum, vol_id, - lnum); + ubi_warn("corrupted VID header at PEB %d, LEB %d:%d", + pnum, vol_id, lnum); err = -EBADMSG; } else ubi_ro_mode(ubi); @@ -660,9 +659,8 @@ retry: if (len) { err = ubi_io_write_data(ubi, buf, pnum, offset, len); if (err) { - ubi_warn("failed to write %d bytes at offset %d of " - "LEB %d:%d, PEB %d", len, offset, vol_id, - lnum, pnum); + ubi_warn("failed to write %d bytes at offset %d of LEB %d:%d, PEB %d", + len, offset, vol_id, lnum, pnum); goto write_error; } } @@ -1040,9 +1038,8 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, * cancel it. */ if (vol->eba_tbl[lnum] != from) { - dbg_wl("LEB %d:%d is no longer mapped to PEB %d, mapped to " - "PEB %d, cancel", vol_id, lnum, from, - vol->eba_tbl[lnum]); + dbg_wl("LEB %d:%d is no longer mapped to PEB %d, mapped to PEB %d, cancel", + vol_id, lnum, from, vol->eba_tbl[lnum]); err = MOVE_CANCEL_RACE; goto out_unlock_leb; } @@ -1107,8 +1104,8 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, err = ubi_io_read_vid_hdr(ubi, to, vid_hdr, 1); if (err) { if (err != UBI_IO_BITFLIPS) { - ubi_warn("error %d while reading VID header back from " - "PEB %d", err, to); + ubi_warn("error %d while reading VID header back from PEB %d", + err, to); if (is_error_sane(err)) err = MOVE_TARGET_RD_ERR; } else @@ -1134,8 +1131,8 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, err = ubi_io_read_data(ubi, ubi->peb_buf, to, 0, aldata_size); if (err) { if (err != UBI_IO_BITFLIPS) { - ubi_warn("error %d while reading data back " - "from PEB %d", err, to); + ubi_warn("error %d while reading data back from PEB %d", + err, to); if (is_error_sane(err)) err = MOVE_TARGET_RD_ERR; } else @@ -1146,8 +1143,8 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, cond_resched(); if (crc != crc32(UBI_CRC32_INIT, ubi->peb_buf, data_size)) { - ubi_warn("read data back from PEB %d and it is " - "different", to); + ubi_warn("read data back from PEB %d and it is different", + to); err = -EINVAL; goto out_unlock_buf; } @@ -1197,11 +1194,11 @@ static void print_rsvd_warning(struct ubi_device *ubi, return; } - ubi_warn("cannot reserve enough PEBs for bad PEB handling, reserved %d," - " need %d", ubi->beb_rsvd_pebs, ubi->beb_rsvd_level); + ubi_warn("cannot reserve enough PEBs for bad PEB handling, reserved %d, need %d", + ubi->beb_rsvd_pebs, ubi->beb_rsvd_level); if (ubi->corr_peb_count) ubi_warn("%d PEBs are corrupted and not used", - ubi->corr_peb_count); + ubi->corr_peb_count); } /** diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c index 4e44bee4c56..c25aa290641 100644 --- a/drivers/mtd/ubi/gluebi.c +++ b/drivers/mtd/ubi/gluebi.c @@ -341,9 +341,8 @@ static int gluebi_create(struct ubi_device_info *di, mutex_lock(&devices_mutex); g = find_gluebi_nolock(vi->ubi_num, vi->vol_id); if (g) - err_msg("gluebi MTD device %d form UBI device %d volume %d " - "already exists", g->mtd.index, vi->ubi_num, - vi->vol_id); + err_msg("gluebi MTD device %d form UBI device %d volume %d already exists", + g->mtd.index, vi->ubi_num, vi->vol_id); mutex_unlock(&devices_mutex); if (mtd_device_register(mtd, NULL, 0)) { @@ -376,8 +375,8 @@ static int gluebi_remove(struct ubi_volume_info *vi) mutex_lock(&devices_mutex); gluebi = find_gluebi_nolock(vi->ubi_num, vi->vol_id); if (!gluebi) { - err_msg("got remove notification for unknown UBI device %d " - "volume %d", vi->ubi_num, vi->vol_id); + err_msg("got remove notification for unknown UBI device %d volume %d", + vi->ubi_num, vi->vol_id); err = -ENOENT; } else if (gluebi->refcnt) err = -EBUSY; @@ -390,9 +389,8 @@ static int gluebi_remove(struct ubi_volume_info *vi) mtd = &gluebi->mtd; err = mtd_device_unregister(mtd); if (err) { - err_msg("cannot remove fake MTD device %d, UBI device %d, " - "volume %d, error %d", mtd->index, gluebi->ubi_num, - gluebi->vol_id, err); + err_msg("cannot remove fake MTD device %d, UBI device %d, volume %d, error %d", + mtd->index, gluebi->ubi_num, gluebi->vol_id, err); mutex_lock(&devices_mutex); list_add_tail(&gluebi->list, &gluebi_devices); mutex_unlock(&devices_mutex); @@ -422,8 +420,8 @@ static int gluebi_updated(struct ubi_volume_info *vi) gluebi = find_gluebi_nolock(vi->ubi_num, vi->vol_id); if (!gluebi) { mutex_unlock(&devices_mutex); - err_msg("got update notification for unknown UBI device %d " - "volume %d", vi->ubi_num, vi->vol_id); + err_msg("got update notification for unknown UBI device %d volume %d", + vi->ubi_num, vi->vol_id); return -ENOENT; } @@ -449,8 +447,8 @@ static int gluebi_resized(struct ubi_volume_info *vi) gluebi = find_gluebi_nolock(vi->ubi_num, vi->vol_id); if (!gluebi) { mutex_unlock(&devices_mutex); - err_msg("got update notification for unknown UBI device %d " - "volume %d", vi->ubi_num, vi->vol_id); + err_msg("got update notification for unknown UBI device %d volume %d", + vi->ubi_num, vi->vol_id); return -ENOENT; } gluebi->mtd.size = vi->used_bytes; @@ -507,9 +505,9 @@ static void __exit ubi_gluebi_exit(void) err = mtd_device_unregister(mtd); if (err) - err_msg("error %d while removing gluebi MTD device %d, " - "UBI device %d, volume %d - ignoring", err, - mtd->index, gluebi->ubi_num, gluebi->vol_id); + err_msg("error %d while removing gluebi MTD device %d, UBI device %d, volume %d - ignoring", + err, mtd->index, gluebi->ubi_num, + gluebi->vol_id); kfree(mtd->name); kfree(gluebi); } diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c index a8d523794b5..321541159f5 100644 --- a/drivers/mtd/ubi/io.c +++ b/drivers/mtd/ubi/io.c @@ -183,15 +183,14 @@ retry: } if (retries++ < UBI_IO_RETRIES) { - ubi_warn("error %d%s while reading %d bytes from PEB " - "%d:%d, read only %zd bytes, retry", + ubi_warn("error %d%s while reading %d bytes from PEB %d:%d, read only %zd bytes, retry", err, errstr, len, pnum, offset, read); yield(); goto retry; } - ubi_err("error %d%s while reading %d bytes from PEB %d:%d, " - "read %zd bytes", err, errstr, len, pnum, offset, read); + ubi_err("error %d%s while reading %d bytes from PEB %d:%d, read %zd bytes", + err, errstr, len, pnum, offset, read); dump_stack(); /* @@ -274,8 +273,8 @@ int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset, } if (ubi_dbg_is_write_failure(ubi)) { - ubi_err("cannot write %d bytes to PEB %d:%d " - "(emulated)", len, pnum, offset); + ubi_err("cannot write %d bytes to PEB %d:%d (emulated)", + len, pnum, offset); dump_stack(); return -EIO; } @@ -283,8 +282,8 @@ int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset, addr = (loff_t)pnum * ubi->peb_size + offset; err = mtd_write(ubi->mtd, addr, len, &written, buf); if (err) { - ubi_err("error %d while writing %d bytes to PEB %d:%d, written " - "%zd bytes", err, len, pnum, offset, written); + ubi_err("error %d while writing %d bytes to PEB %d:%d, written %zd bytes", + err, len, pnum, offset, written); dump_stack(); ubi_dump_flash(ubi, pnum, offset, len); } else @@ -685,8 +684,7 @@ static int validate_ec_hdr(const struct ubi_device *ubi, leb_start = be32_to_cpu(ec_hdr->data_offset); if (ec_hdr->version != UBI_VERSION) { - ubi_err("node with incompatible UBI version found: " - "this UBI version is %d, image version is %d", + ubi_err("node with incompatible UBI version found: this UBI version is %d, image version is %d", UBI_VERSION, (int)ec_hdr->version); goto bad; } @@ -777,10 +775,10 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum, if (ubi_check_pattern(ec_hdr, 0xFF, UBI_EC_HDR_SIZE)) { /* The physical eraseblock is supposedly empty */ if (verbose) - ubi_warn("no EC header found at PEB %d, " - "only 0xFF bytes", pnum); - dbg_bld("no EC header found at PEB %d, " - "only 0xFF bytes", pnum); + ubi_warn("no EC header found at PEB %d, only 0xFF bytes", + pnum); + dbg_bld("no EC header found at PEB %d, only 0xFF bytes", + pnum); if (!read_err) return UBI_IO_FF; else @@ -792,12 +790,12 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum, * 0xFF bytes. Report that the header is corrupted. */ if (verbose) { - ubi_warn("bad magic number at PEB %d: %08x instead of " - "%08x", pnum, magic, UBI_EC_HDR_MAGIC); + ubi_warn("bad magic number at PEB %d: %08x instead of %08x", + pnum, magic, UBI_EC_HDR_MAGIC); ubi_dump_ec_hdr(ec_hdr); } - dbg_bld("bad magic number at PEB %d: %08x instead of " - "%08x", pnum, magic, UBI_EC_HDR_MAGIC); + dbg_bld("bad magic number at PEB %d: %08x instead of %08x", + pnum, magic, UBI_EC_HDR_MAGIC); return UBI_IO_BAD_HDR; } @@ -806,12 +804,12 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum, if (hdr_crc != crc) { if (verbose) { - ubi_warn("bad EC header CRC at PEB %d, calculated " - "%#08x, read %#08x", pnum, crc, hdr_crc); + ubi_warn("bad EC header CRC at PEB %d, calculated %#08x, read %#08x", + pnum, crc, hdr_crc); ubi_dump_ec_hdr(ec_hdr); } - dbg_bld("bad EC header CRC at PEB %d, calculated " - "%#08x, read %#08x", pnum, crc, hdr_crc); + dbg_bld("bad EC header CRC at PEB %d, calculated %#08x, read %#08x", + pnum, crc, hdr_crc); if (!read_err) return UBI_IO_BAD_HDR; @@ -1032,10 +1030,10 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum, if (ubi_check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) { if (verbose) - ubi_warn("no VID header found at PEB %d, " - "only 0xFF bytes", pnum); - dbg_bld("no VID header found at PEB %d, " - "only 0xFF bytes", pnum); + ubi_warn("no VID header found at PEB %d, only 0xFF bytes", + pnum); + dbg_bld("no VID header found at PEB %d, only 0xFF bytes", + pnum); if (!read_err) return UBI_IO_FF; else @@ -1043,12 +1041,12 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum, } if (verbose) { - ubi_warn("bad magic number at PEB %d: %08x instead of " - "%08x", pnum, magic, UBI_VID_HDR_MAGIC); + ubi_warn("bad magic number at PEB %d: %08x instead of %08x", + pnum, magic, UBI_VID_HDR_MAGIC); ubi_dump_vid_hdr(vid_hdr); } - dbg_bld("bad magic number at PEB %d: %08x instead of " - "%08x", pnum, magic, UBI_VID_HDR_MAGIC); + dbg_bld("bad magic number at PEB %d: %08x instead of %08x", + pnum, magic, UBI_VID_HDR_MAGIC); return UBI_IO_BAD_HDR; } @@ -1057,12 +1055,12 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum, if (hdr_crc != crc) { if (verbose) { - ubi_warn("bad CRC at PEB %d, calculated %#08x, " - "read %#08x", pnum, crc, hdr_crc); + ubi_warn("bad CRC at PEB %d, calculated %#08x, read %#08x", + pnum, crc, hdr_crc); ubi_dump_vid_hdr(vid_hdr); } - dbg_bld("bad CRC at PEB %d, calculated %#08x, " - "read %#08x", pnum, crc, hdr_crc); + dbg_bld("bad CRC at PEB %d, calculated %#08x, read %#08x", + pnum, crc, hdr_crc); if (!read_err) return UBI_IO_BAD_HDR; else @@ -1300,8 +1298,8 @@ static int self_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum) crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_EC_HDR_SIZE_CRC); hdr_crc = be32_to_cpu(vid_hdr->hdr_crc); if (hdr_crc != crc) { - ubi_err("bad VID header CRC at PEB %d, calculated %#08x, " - "read %#08x", pnum, crc, hdr_crc); + ubi_err("bad VID header CRC at PEB %d, calculated %#08x, read %#08x", + pnum, crc, hdr_crc); ubi_err("self-check failed for PEB %d", pnum); ubi_dump_vid_hdr(vid_hdr); dump_stack(); @@ -1411,15 +1409,15 @@ int ubi_self_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len) err = mtd_read(ubi->mtd, addr, len, &read, buf); if (err && !mtd_is_bitflip(err)) { - ubi_err("error %d while reading %d bytes from PEB %d:%d, " - "read %zd bytes", err, len, pnum, offset, read); + ubi_err("error %d while reading %d bytes from PEB %d:%d, read %zd bytes", + err, len, pnum, offset, read); goto error; } err = ubi_check_pattern(buf, 0xFF, len); if (err == 0) { - ubi_err("flash region at PEB %d:%d, length %d does not " - "contain all 0xFF bytes", pnum, offset, len); + ubi_err("flash region at PEB %d:%d, length %d does not contain all 0xFF bytes", + pnum, offset, len); goto fail; } diff --git a/drivers/mtd/ubi/misc.c b/drivers/mtd/ubi/misc.c index d089df05548..f913d701a5b 100644 --- a/drivers/mtd/ubi/misc.c +++ b/drivers/mtd/ubi/misc.c @@ -128,9 +128,7 @@ void ubi_calculate_reserved(struct ubi_device *ubi) ubi->beb_rsvd_level = ubi->bad_peb_limit - ubi->bad_peb_count; if (ubi->beb_rsvd_level < 0) { ubi->beb_rsvd_level = 0; - ubi_warn("number of bad PEBs (%d) is above the expected limit " - "(%d), not reserving any PEBs for bad PEB handling, " - "will use available PEBs (if any)", + ubi_warn("number of bad PEBs (%d) is above the expected limit (%d), not reserving any PEBs for bad PEB handling, will use available PEBs (if any)", ubi->bad_peb_count, ubi->bad_peb_limit); } } diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c index 437bc193e17..7e7c20114ed 100644 --- a/drivers/mtd/ubi/vtbl.c +++ b/drivers/mtd/ubi/vtbl.c @@ -270,8 +270,8 @@ static int vtbl_check(const struct ubi_device *ubi, if (len1 > 0 && len1 == len2 && !strncmp(vtbl[i].name, vtbl[n].name, len1)) { - ubi_err("volumes %d and %d have the same name" - " \"%s\"", i, n, vtbl[i].name); + ubi_err("volumes %d and %d have the same name \"%s\"", + i, n, vtbl[i].name); ubi_dump_vtbl_record(&vtbl[i], i); ubi_dump_vtbl_record(&vtbl[n], n); return -EINVAL; @@ -562,8 +562,8 @@ static int init_volumes(struct ubi_device *ubi, if (vtbl[i].flags & UBI_VTBL_AUTORESIZE_FLG) { /* Auto re-size flag may be set only for one volume */ if (ubi->autoresize_vol_id != -1) { - ubi_err("more than one auto-resize volume (%d " - "and %d)", ubi->autoresize_vol_id, i); + ubi_err("more than one auto-resize volume (%d and %d)", + ubi->autoresize_vol_id, i); kfree(vol); return -EINVAL; } -- cgit v1.2.3 From e28453bbb76c290d67eb28b3ff6875a6519c3998 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 27 Aug 2012 15:13:05 +0300 Subject: UBI: use pr_ helper instead of printk Use 'pr_err()' instead of 'printk(KERN_ERR', etc. Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/attach.c | 6 +- drivers/mtd/ubi/build.c | 23 ++++---- drivers/mtd/ubi/debug.c | 149 ++++++++++++++++++++++------------------------- drivers/mtd/ubi/debug.h | 8 +-- drivers/mtd/ubi/gluebi.c | 2 +- drivers/mtd/ubi/ubi.h | 8 +-- 6 files changed, 93 insertions(+), 103 deletions(-) (limited to 'drivers/mtd/ubi') diff --git a/drivers/mtd/ubi/attach.c b/drivers/mtd/ubi/attach.c index d8e92b6a33f..e1d90683e35 100644 --- a/drivers/mtd/ubi/attach.c +++ b/drivers/mtd/ubi/attach.c @@ -1074,10 +1074,10 @@ static int late_analysis(struct ubi_device *ubi, struct ubi_attach_info *ai) if (ai->corr_peb_count) { ubi_err("%d PEBs are corrupted and preserved", ai->corr_peb_count); - printk(KERN_ERR "Corrupted PEBs are:"); + pr_err("Corrupted PEBs are:"); list_for_each_entry(aeb, &ai->corr, u.list) - printk(KERN_CONT " %d", aeb->pnum); - printk(KERN_CONT "\n"); + pr_cont(" %d", aeb->pnum); + pr_cont("\n"); /* * If too many PEBs are corrupted, we refuse attaching, diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index dd9bc0a5cc3..998a0bfc30d 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -1304,8 +1304,7 @@ static int __init bytes_str_to_int(const char *str) result = simple_strtoul(str, &endp, 0); if (str == endp || result >= INT_MAX) { - printk(KERN_ERR "UBI error: incorrect bytes count: \"%s\"\n", - str); + ubi_err("UBI error: incorrect bytes count: \"%s\"\n", str); return -EINVAL; } @@ -1321,8 +1320,7 @@ static int __init bytes_str_to_int(const char *str) case '\0': break; default: - printk(KERN_ERR "UBI error: incorrect bytes count: \"%s\"\n", - str); + ubi_err("UBI error: incorrect bytes count: \"%s\"\n", str); return -EINVAL; } @@ -1349,20 +1347,20 @@ static int __init ubi_mtd_param_parse(const char *val, struct kernel_param *kp) return -EINVAL; if (mtd_devs == UBI_MAX_DEVICES) { - printk(KERN_ERR "UBI error: too many parameters, max. is %d\n", - UBI_MAX_DEVICES); + ubi_err("UBI error: too many parameters, max. is %d\n", + UBI_MAX_DEVICES); return -EINVAL; } len = strnlen(val, MTD_PARAM_LEN_MAX); if (len == MTD_PARAM_LEN_MAX) { - printk(KERN_ERR "UBI error: parameter \"%s\" is too long, max. is %d\n", - val, MTD_PARAM_LEN_MAX); + ubi_err("UBI error: parameter \"%s\" is too long, max. is %d\n", + val, MTD_PARAM_LEN_MAX); return -EINVAL; } if (len == 0) { - printk(KERN_WARNING "UBI warning: empty 'mtd=' parameter - ignored\n"); + pr_warn("UBI warning: empty 'mtd=' parameter - ignored\n"); return 0; } @@ -1376,8 +1374,7 @@ static int __init ubi_mtd_param_parse(const char *val, struct kernel_param *kp) tokens[i] = strsep(&pbuf, ","); if (pbuf) { - printk(KERN_ERR "UBI error: too many arguments at \"%s\"\n", - val); + ubi_err("UBI error: too many arguments at \"%s\"\n", val); return -EINVAL; } @@ -1394,8 +1391,8 @@ static int __init ubi_mtd_param_parse(const char *val, struct kernel_param *kp) int err = kstrtoint(tokens[2], 10, &p->max_beb_per1024); if (err) { - printk(KERN_ERR "UBI error: bad value for max_beb_per1024 parameter: %s", - tokens[2]); + ubi_err("UBI error: bad value for max_beb_per1024 parameter: %s", + tokens[2]); return -EINVAL; } } diff --git a/drivers/mtd/ubi/debug.c b/drivers/mtd/ubi/debug.c index dd97324f3a1..26908a59506 100644 --- a/drivers/mtd/ubi/debug.c +++ b/drivers/mtd/ubi/debug.c @@ -62,21 +62,15 @@ out: */ void ubi_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr) { - printk(KERN_DEBUG "Erase counter header dump:\n"); - printk(KERN_DEBUG "\tmagic %#08x\n", - be32_to_cpu(ec_hdr->magic)); - printk(KERN_DEBUG "\tversion %d\n", (int)ec_hdr->version); - printk(KERN_DEBUG "\tec %llu\n", - (long long)be64_to_cpu(ec_hdr->ec)); - printk(KERN_DEBUG "\tvid_hdr_offset %d\n", - be32_to_cpu(ec_hdr->vid_hdr_offset)); - printk(KERN_DEBUG "\tdata_offset %d\n", - be32_to_cpu(ec_hdr->data_offset)); - printk(KERN_DEBUG "\timage_seq %d\n", - be32_to_cpu(ec_hdr->image_seq)); - printk(KERN_DEBUG "\thdr_crc %#08x\n", - be32_to_cpu(ec_hdr->hdr_crc)); - printk(KERN_DEBUG "erase counter header hexdump:\n"); + pr_err("Erase counter header dump:\n"); + pr_err("\tmagic %#08x\n", be32_to_cpu(ec_hdr->magic)); + pr_err("\tversion %d\n", (int)ec_hdr->version); + pr_err("\tec %llu\n", (long long)be64_to_cpu(ec_hdr->ec)); + pr_err("\tvid_hdr_offset %d\n", be32_to_cpu(ec_hdr->vid_hdr_offset)); + pr_err("\tdata_offset %d\n", be32_to_cpu(ec_hdr->data_offset)); + pr_err("\timage_seq %d\n", be32_to_cpu(ec_hdr->image_seq)); + pr_err("\thdr_crc %#08x\n", be32_to_cpu(ec_hdr->hdr_crc)); + pr_err("erase counter header hexdump:\n"); print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, ec_hdr, UBI_EC_HDR_SIZE, 1); } @@ -87,21 +81,21 @@ void ubi_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr) */ void ubi_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr) { - printk(KERN_DEBUG "Volume identifier header dump:\n"); - printk(KERN_DEBUG "\tmagic %08x\n", be32_to_cpu(vid_hdr->magic)); - printk(KERN_DEBUG "\tversion %d\n", (int)vid_hdr->version); - printk(KERN_DEBUG "\tvol_type %d\n", (int)vid_hdr->vol_type); - printk(KERN_DEBUG "\tcopy_flag %d\n", (int)vid_hdr->copy_flag); - printk(KERN_DEBUG "\tcompat %d\n", (int)vid_hdr->compat); - printk(KERN_DEBUG "\tvol_id %d\n", be32_to_cpu(vid_hdr->vol_id)); - printk(KERN_DEBUG "\tlnum %d\n", be32_to_cpu(vid_hdr->lnum)); - printk(KERN_DEBUG "\tdata_size %d\n", be32_to_cpu(vid_hdr->data_size)); - printk(KERN_DEBUG "\tused_ebs %d\n", be32_to_cpu(vid_hdr->used_ebs)); - printk(KERN_DEBUG "\tdata_pad %d\n", be32_to_cpu(vid_hdr->data_pad)); - printk(KERN_DEBUG "\tsqnum %llu\n", + pr_err("Volume identifier header dump:\n"); + pr_err("\tmagic %08x\n", be32_to_cpu(vid_hdr->magic)); + pr_err("\tversion %d\n", (int)vid_hdr->version); + pr_err("\tvol_type %d\n", (int)vid_hdr->vol_type); + pr_err("\tcopy_flag %d\n", (int)vid_hdr->copy_flag); + pr_err("\tcompat %d\n", (int)vid_hdr->compat); + pr_err("\tvol_id %d\n", be32_to_cpu(vid_hdr->vol_id)); + pr_err("\tlnum %d\n", be32_to_cpu(vid_hdr->lnum)); + pr_err("\tdata_size %d\n", be32_to_cpu(vid_hdr->data_size)); + pr_err("\tused_ebs %d\n", be32_to_cpu(vid_hdr->used_ebs)); + pr_err("\tdata_pad %d\n", be32_to_cpu(vid_hdr->data_pad)); + pr_err("\tsqnum %llu\n", (unsigned long long)be64_to_cpu(vid_hdr->sqnum)); - printk(KERN_DEBUG "\thdr_crc %08x\n", be32_to_cpu(vid_hdr->hdr_crc)); - printk(KERN_DEBUG "Volume identifier header hexdump:\n"); + pr_err("\thdr_crc %08x\n", be32_to_cpu(vid_hdr->hdr_crc)); + pr_err("Volume identifier header hexdump:\n"); print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, vid_hdr, UBI_VID_HDR_SIZE, 1); } @@ -112,25 +106,25 @@ void ubi_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr) */ void ubi_dump_vol_info(const struct ubi_volume *vol) { - printk(KERN_DEBUG "Volume information dump:\n"); - printk(KERN_DEBUG "\tvol_id %d\n", vol->vol_id); - printk(KERN_DEBUG "\treserved_pebs %d\n", vol->reserved_pebs); - printk(KERN_DEBUG "\talignment %d\n", vol->alignment); - printk(KERN_DEBUG "\tdata_pad %d\n", vol->data_pad); - printk(KERN_DEBUG "\tvol_type %d\n", vol->vol_type); - printk(KERN_DEBUG "\tname_len %d\n", vol->name_len); - printk(KERN_DEBUG "\tusable_leb_size %d\n", vol->usable_leb_size); - printk(KERN_DEBUG "\tused_ebs %d\n", vol->used_ebs); - printk(KERN_DEBUG "\tused_bytes %lld\n", vol->used_bytes); - printk(KERN_DEBUG "\tlast_eb_bytes %d\n", vol->last_eb_bytes); - printk(KERN_DEBUG "\tcorrupted %d\n", vol->corrupted); - printk(KERN_DEBUG "\tupd_marker %d\n", vol->upd_marker); + pr_err("Volume information dump:\n"); + pr_err("\tvol_id %d\n", vol->vol_id); + pr_err("\treserved_pebs %d\n", vol->reserved_pebs); + pr_err("\talignment %d\n", vol->alignment); + pr_err("\tdata_pad %d\n", vol->data_pad); + pr_err("\tvol_type %d\n", vol->vol_type); + pr_err("\tname_len %d\n", vol->name_len); + pr_err("\tusable_leb_size %d\n", vol->usable_leb_size); + pr_err("\tused_ebs %d\n", vol->used_ebs); + pr_err("\tused_bytes %lld\n", vol->used_bytes); + pr_err("\tlast_eb_bytes %d\n", vol->last_eb_bytes); + pr_err("\tcorrupted %d\n", vol->corrupted); + pr_err("\tupd_marker %d\n", vol->upd_marker); if (vol->name_len <= UBI_VOL_NAME_MAX && strnlen(vol->name, vol->name_len + 1) == vol->name_len) { - printk(KERN_DEBUG "\tname %s\n", vol->name); + pr_err("\tname %s\n", vol->name); } else { - printk(KERN_DEBUG "\t1st 5 characters of name: %c%c%c%c%c\n", + pr_err("\t1st 5 characters of name: %c%c%c%c%c\n", vol->name[0], vol->name[1], vol->name[2], vol->name[3], vol->name[4]); } @@ -145,29 +139,28 @@ void ubi_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx) { int name_len = be16_to_cpu(r->name_len); - printk(KERN_DEBUG "Volume table record %d dump:\n", idx); - printk(KERN_DEBUG "\treserved_pebs %d\n", - be32_to_cpu(r->reserved_pebs)); - printk(KERN_DEBUG "\talignment %d\n", be32_to_cpu(r->alignment)); - printk(KERN_DEBUG "\tdata_pad %d\n", be32_to_cpu(r->data_pad)); - printk(KERN_DEBUG "\tvol_type %d\n", (int)r->vol_type); - printk(KERN_DEBUG "\tupd_marker %d\n", (int)r->upd_marker); - printk(KERN_DEBUG "\tname_len %d\n", name_len); + pr_err("Volume table record %d dump:\n", idx); + pr_err("\treserved_pebs %d\n", be32_to_cpu(r->reserved_pebs)); + pr_err("\talignment %d\n", be32_to_cpu(r->alignment)); + pr_err("\tdata_pad %d\n", be32_to_cpu(r->data_pad)); + pr_err("\tvol_type %d\n", (int)r->vol_type); + pr_err("\tupd_marker %d\n", (int)r->upd_marker); + pr_err("\tname_len %d\n", name_len); if (r->name[0] == '\0') { - printk(KERN_DEBUG "\tname NULL\n"); + pr_err("\tname NULL\n"); return; } if (name_len <= UBI_VOL_NAME_MAX && strnlen(&r->name[0], name_len + 1) == name_len) { - printk(KERN_DEBUG "\tname %s\n", &r->name[0]); + pr_err("\tname %s\n", &r->name[0]); } else { - printk(KERN_DEBUG "\t1st 5 characters of name: %c%c%c%c%c\n", + pr_err("\t1st 5 characters of name: %c%c%c%c%c\n", r->name[0], r->name[1], r->name[2], r->name[3], r->name[4]); } - printk(KERN_DEBUG "\tcrc %#08x\n", be32_to_cpu(r->crc)); + pr_err("\tcrc %#08x\n", be32_to_cpu(r->crc)); } /** @@ -176,15 +169,15 @@ void ubi_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx) */ void ubi_dump_av(const struct ubi_ainf_volume *av) { - printk(KERN_DEBUG "Volume attaching information dump:\n"); - printk(KERN_DEBUG "\tvol_id %d\n", av->vol_id); - printk(KERN_DEBUG "\thighest_lnum %d\n", av->highest_lnum); - printk(KERN_DEBUG "\tleb_count %d\n", av->leb_count); - printk(KERN_DEBUG "\tcompat %d\n", av->compat); - printk(KERN_DEBUG "\tvol_type %d\n", av->vol_type); - printk(KERN_DEBUG "\tused_ebs %d\n", av->used_ebs); - printk(KERN_DEBUG "\tlast_data_size %d\n", av->last_data_size); - printk(KERN_DEBUG "\tdata_pad %d\n", av->data_pad); + pr_err("Volume attaching information dump:\n"); + pr_err("\tvol_id %d\n", av->vol_id); + pr_err("\thighest_lnum %d\n", av->highest_lnum); + pr_err("\tleb_count %d\n", av->leb_count); + pr_err("\tcompat %d\n", av->compat); + pr_err("\tvol_type %d\n", av->vol_type); + pr_err("\tused_ebs %d\n", av->used_ebs); + pr_err("\tlast_data_size %d\n", av->last_data_size); + pr_err("\tdata_pad %d\n", av->data_pad); } /** @@ -194,13 +187,13 @@ void ubi_dump_av(const struct ubi_ainf_volume *av) */ void ubi_dump_aeb(const struct ubi_ainf_peb *aeb, int type) { - printk(KERN_DEBUG "eraseblock attaching information dump:\n"); - printk(KERN_DEBUG "\tec %d\n", aeb->ec); - printk(KERN_DEBUG "\tpnum %d\n", aeb->pnum); + pr_err("eraseblock attaching information dump:\n"); + pr_err("\tec %d\n", aeb->ec); + pr_err("\tpnum %d\n", aeb->pnum); if (type == 0) { - printk(KERN_DEBUG "\tlnum %d\n", aeb->lnum); - printk(KERN_DEBUG "\tscrub %d\n", aeb->scrub); - printk(KERN_DEBUG "\tsqnum %llu\n", aeb->sqnum); + pr_err("\tlnum %d\n", aeb->lnum); + pr_err("\tscrub %d\n", aeb->scrub); + pr_err("\tsqnum %llu\n", aeb->sqnum); } } @@ -212,16 +205,16 @@ void ubi_dump_mkvol_req(const struct ubi_mkvol_req *req) { char nm[17]; - printk(KERN_DEBUG "Volume creation request dump:\n"); - printk(KERN_DEBUG "\tvol_id %d\n", req->vol_id); - printk(KERN_DEBUG "\talignment %d\n", req->alignment); - printk(KERN_DEBUG "\tbytes %lld\n", (long long)req->bytes); - printk(KERN_DEBUG "\tvol_type %d\n", req->vol_type); - printk(KERN_DEBUG "\tname_len %d\n", req->name_len); + pr_err("Volume creation request dump:\n"); + pr_err("\tvol_id %d\n", req->vol_id); + pr_err("\talignment %d\n", req->alignment); + pr_err("\tbytes %lld\n", (long long)req->bytes); + pr_err("\tvol_type %d\n", req->vol_type); + pr_err("\tname_len %d\n", req->name_len); memcpy(nm, req->name, 16); nm[16] = 0; - printk(KERN_DEBUG "\t1st 16 characters of name: %s\n", nm); + pr_err("\t1st 16 characters of name: %s\n", nm); } /** diff --git a/drivers/mtd/ubi/debug.h b/drivers/mtd/ubi/debug.h index d9e89ec9098..ea4cb7ca335 100644 --- a/drivers/mtd/ubi/debug.h +++ b/drivers/mtd/ubi/debug.h @@ -29,13 +29,13 @@ void ubi_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr); #define ubi_assert(expr) do { \ if (unlikely(!(expr))) { \ - printk(KERN_CRIT "UBI assert failed in %s at %u (pid %d)\n", \ + pr_crit("UBI assert failed in %s at %u (pid %d)\n", \ __func__, __LINE__, current->pid); \ dump_stack(); \ } \ } while (0) -#define ubi_dbg_print_hex_dump(l, ps, pt, r, g, b, len, a) \ +#define ubi_dbg_print_hex_dump(l, ps, pt, r, g, b, len, a) \ print_hex_dump(l, ps, pt, r, g, b, len, a) #define ubi_dbg_msg(type, fmt, ...) \ @@ -43,8 +43,8 @@ void ubi_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr); ##__VA_ARGS__) /* Just a debugging messages not related to any specific UBI subsystem */ -#define dbg_msg(fmt, ...) \ - printk(KERN_DEBUG "UBI DBG (pid %d): %s: " fmt "\n", \ +#define dbg_msg(fmt, ...) \ + pr_err("UBI DBG (pid %d): %s: " fmt "\n", \ current->pid, __func__, ##__VA_ARGS__) /* General debugging messages */ diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c index c25aa290641..4bd4db8c84c 100644 --- a/drivers/mtd/ubi/gluebi.c +++ b/drivers/mtd/ubi/gluebi.c @@ -41,7 +41,7 @@ #include "ubi-media.h" #define err_msg(fmt, ...) \ - printk(KERN_DEBUG "gluebi (pid %d): %s: " fmt "\n", \ + pr_err("gluebi (pid %d): %s: " fmt "\n", \ current->pid, __func__, ##__VA_ARGS__) /** diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index 2a2475b9ec5..383ee43d242 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -51,12 +51,12 @@ #define UBI_NAME_STR "ubi" /* Normal UBI messages */ -#define ubi_msg(fmt, ...) printk(KERN_NOTICE "UBI: " fmt "\n", ##__VA_ARGS__) +#define ubi_msg(fmt, ...) pr_notice("UBI: " fmt "\n", ##__VA_ARGS__) /* UBI warning messages */ -#define ubi_warn(fmt, ...) printk(KERN_WARNING "UBI warning: %s: " fmt "\n", \ - __func__, ##__VA_ARGS__) +#define ubi_warn(fmt, ...) pr_warn("UBI warning: %s: " fmt "\n", \ + __func__, ##__VA_ARGS__) /* UBI error messages */ -#define ubi_err(fmt, ...) printk(KERN_ERR "UBI error: %s: " fmt "\n", \ +#define ubi_err(fmt, ...) pr_err("UBI error: %s: " fmt "\n", \ __func__, ##__VA_ARGS__) /* Background thread name pattern */ -- cgit v1.2.3 From 719bb84017fcfc949a77e150dd5b045e90a4ebc9 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 27 Aug 2012 17:14:58 +0300 Subject: UBI: print less MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit UBI currently prints a lot of information when it mounts a volume, which bothers some people. Make it less chatty - print only important information by default. Get rid of 'dbg_msg()' macro completely. Reported-by: Uwe Kleine-König Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/attach.c | 8 +++--- drivers/mtd/ubi/build.c | 73 +++++++++++++++++++++--------------------------- drivers/mtd/ubi/cdev.c | 6 ++-- drivers/mtd/ubi/debug.h | 5 ---- drivers/mtd/ubi/io.c | 2 +- drivers/mtd/ubi/vtbl.c | 2 +- drivers/mtd/ubi/wl.c | 2 +- 7 files changed, 42 insertions(+), 56 deletions(-) (limited to 'drivers/mtd/ubi') diff --git a/drivers/mtd/ubi/attach.c b/drivers/mtd/ubi/attach.c index e1d90683e35..da132155c79 100644 --- a/drivers/mtd/ubi/attach.c +++ b/drivers/mtd/ubi/attach.c @@ -794,8 +794,8 @@ static int check_corruption(struct ubi_device *ubi, struct ubi_vid_hdr *vid_hdr, pnum); ubi_err("this may be a non-UBI PEB or a severe VID header corruption which requires manual inspection"); ubi_dump_vid_hdr(vid_hdr); - dbg_msg("hexdump of PEB %d offset %d, length %d", - pnum, ubi->leb_start, ubi->leb_size); + pr_err("hexdump of PEB %d offset %d, length %d", + pnum, ubi->leb_start, ubi->leb_size); ubi_dbg_print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, ubi->peb_buf, ubi->leb_size, 1); err = 1; @@ -1170,7 +1170,7 @@ static struct ubi_attach_info *scan_all(struct ubi_device *ubi) goto out_vidh; } - dbg_msg("scanning is finished"); + ubi_msg("scanning is finished"); /* Calculate mean erase counter */ if (ai->ec_count) @@ -1242,7 +1242,7 @@ int ubi_attach(struct ubi_device *ubi) ubi->corr_peb_count = ai->corr_peb_count; ubi->max_ec = ai->max_ec; ubi->mean_ec = ai->mean_ec; - ubi_msg("max. sequence number: %llu", ai->max_sqnum); + dbg_gen("max. sequence number: %llu", ai->max_sqnum); err = ubi_read_volume_table(ubi, ai); if (err) diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 998a0bfc30d..8fd85e32506 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -619,6 +619,9 @@ static int get_bad_peb_limit(const struct ubi_device *ubi, int max_beb_per1024) */ static int io_init(struct ubi_device *ubi, int max_beb_per1024) { + dbg_gen("sizeof(struct ubi_ainf_peb) %zu", sizeof(struct ubi_ainf_peb)); + dbg_gen("sizeof(struct ubi_wl_entry) %zu", sizeof(struct ubi_wl_entry)); + if (ubi->mtd->numeraseregions != 0) { /* * Some flashes have several erase regions. Different regions @@ -690,11 +693,11 @@ static int io_init(struct ubi_device *ubi, int max_beb_per1024) ubi->ec_hdr_alsize = ALIGN(UBI_EC_HDR_SIZE, ubi->hdrs_min_io_size); ubi->vid_hdr_alsize = ALIGN(UBI_VID_HDR_SIZE, ubi->hdrs_min_io_size); - dbg_msg("min_io_size %d", ubi->min_io_size); - dbg_msg("max_write_size %d", ubi->max_write_size); - dbg_msg("hdrs_min_io_size %d", ubi->hdrs_min_io_size); - dbg_msg("ec_hdr_alsize %d", ubi->ec_hdr_alsize); - dbg_msg("vid_hdr_alsize %d", ubi->vid_hdr_alsize); + dbg_gen("min_io_size %d", ubi->min_io_size); + dbg_gen("max_write_size %d", ubi->max_write_size); + dbg_gen("hdrs_min_io_size %d", ubi->hdrs_min_io_size); + dbg_gen("ec_hdr_alsize %d", ubi->ec_hdr_alsize); + dbg_gen("vid_hdr_alsize %d", ubi->vid_hdr_alsize); if (ubi->vid_hdr_offset == 0) /* Default offset */ @@ -711,10 +714,10 @@ static int io_init(struct ubi_device *ubi, int max_beb_per1024) ubi->leb_start = ubi->vid_hdr_offset + UBI_VID_HDR_SIZE; ubi->leb_start = ALIGN(ubi->leb_start, ubi->min_io_size); - dbg_msg("vid_hdr_offset %d", ubi->vid_hdr_offset); - dbg_msg("vid_hdr_aloffset %d", ubi->vid_hdr_aloffset); - dbg_msg("vid_hdr_shift %d", ubi->vid_hdr_shift); - dbg_msg("leb_start %d", ubi->leb_start); + dbg_gen("vid_hdr_offset %d", ubi->vid_hdr_offset); + dbg_gen("vid_hdr_aloffset %d", ubi->vid_hdr_aloffset); + dbg_gen("vid_hdr_shift %d", ubi->vid_hdr_shift); + dbg_gen("leb_start %d", ubi->leb_start); /* The shift must be aligned to 32-bit boundary */ if (ubi->vid_hdr_shift % 4) { @@ -740,7 +743,7 @@ static int io_init(struct ubi_device *ubi, int max_beb_per1024) ubi->max_erroneous = ubi->peb_count / 10; if (ubi->max_erroneous < 16) ubi->max_erroneous = 16; - dbg_msg("max_erroneous %d", ubi->max_erroneous); + dbg_gen("max_erroneous %d", ubi->max_erroneous); /* * It may happen that EC and VID headers are situated in one minimal @@ -760,17 +763,6 @@ static int io_init(struct ubi_device *ubi, int max_beb_per1024) ubi->ro_mode = 1; } - ubi_msg("physical eraseblock size: %d bytes (%d KiB)", - ubi->peb_size, ubi->peb_size >> 10); - ubi_msg("logical eraseblock size: %d bytes", ubi->leb_size); - ubi_msg("smallest flash I/O unit: %d", ubi->min_io_size); - if (ubi->hdrs_min_io_size != ubi->min_io_size) - ubi_msg("sub-page size: %d", - ubi->hdrs_min_io_size); - ubi_msg("VID header offset: %d (aligned %d)", - ubi->vid_hdr_offset, ubi->vid_hdr_aloffset); - ubi_msg("data offset: %d", ubi->leb_start); - /* * Note, ideally, we have to initialize @ubi->bad_peb_count here. But * unfortunately, MTD does not provide this information. We should loop @@ -932,8 +924,6 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, spin_lock_init(&ubi->volumes_lock); ubi_msg("attaching mtd%d to ubi%d", mtd->index, ubi_num); - dbg_msg("sizeof(struct ubi_ainf_peb) %zu", sizeof(struct ubi_ainf_peb)); - dbg_msg("sizeof(struct ubi_wl_entry) %zu", sizeof(struct ubi_wl_entry)); err = io_init(ubi, max_beb_per1024); if (err) @@ -976,23 +966,24 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, goto out_debugfs; } - ubi_msg("attached mtd%d to ubi%d", mtd->index, ubi_num); - ubi_msg("MTD device name: \"%s\"", mtd->name); - ubi_msg("MTD device size: %llu MiB", ubi->flash_size >> 20); - ubi_msg("number of good PEBs: %d", ubi->good_peb_count); - ubi_msg("number of bad PEBs: %d", ubi->bad_peb_count); - ubi_msg("number of corrupted PEBs: %d", ubi->corr_peb_count); - ubi_msg("max. allowed volumes: %d", ubi->vtbl_slots); - ubi_msg("wear-leveling threshold: %d", CONFIG_MTD_UBI_WL_THRESHOLD); - ubi_msg("number of internal volumes: %d", UBI_INT_VOL_COUNT); - ubi_msg("number of user volumes: %d", - ubi->vol_count - UBI_INT_VOL_COUNT); - ubi_msg("available PEBs: %d", ubi->avail_pebs); - ubi_msg("total number of reserved PEBs: %d", ubi->rsvd_pebs); - ubi_msg("number of PEBs reserved for bad PEB handling: %d", - ubi->beb_rsvd_pebs); - ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec); - ubi_msg("image sequence number: %u", ubi->image_seq); + ubi_msg("attached mtd%d (name \"%s\", size %llu MiB) to ubi%d", + mtd->index, mtd->name, ubi->flash_size >> 20, ubi_num); + ubi_msg("PEB size: %d bytes (%d KiB), LEB size: %d bytes", + ubi->peb_size, ubi->peb_size >> 10, ubi->leb_size); + ubi_msg("min./max. I/O unit sizes: %d/%d, sub-page size %d", + ubi->min_io_size, ubi->max_write_size, ubi->hdrs_min_io_size); + ubi_msg("VID header offset: %d (aligned %d), data offset: %d", + ubi->vid_hdr_offset, ubi->vid_hdr_aloffset, ubi->leb_start); + ubi_msg("good PEBs: %d, bad PEBs: %d, corrupted PEBs: %d", + ubi->good_peb_count, ubi->bad_peb_count, ubi->corr_peb_count); + ubi_msg("user volume: %d, internal volumes: %d, max. volumes count: %d", + ubi->vol_count - UBI_INT_VOL_COUNT, UBI_INT_VOL_COUNT, + ubi->vtbl_slots); + ubi_msg("max/mean erase counter: %d/%d, WL threshold: %d, image sequence number: %u", + ubi->max_ec, ubi->mean_ec, CONFIG_MTD_UBI_WL_THRESHOLD, + ubi->image_seq); + ubi_msg("available PEBs: %d, total reserved PEBs: %d, PEBs reserved for bad PEB handling: %d", + ubi->avail_pebs, ubi->rsvd_pebs, ubi->beb_rsvd_pebs); /* * The below lock makes sure we do not race with 'ubi_thread()' which @@ -1069,7 +1060,7 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway) ubi_assert(ubi_num == ubi->ubi_num); ubi_notify_all(ubi, UBI_VOLUME_REMOVED, NULL); - dbg_msg("detaching mtd%d from ubi%d", ubi->mtd->index, ubi_num); + ubi_msg("detaching mtd%d from ubi%d", ubi->mtd->index, ubi_num); /* * Before freeing anything, we have to stop the background thread to diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index 540d2db492e..dfcc65b33e9 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -754,7 +754,7 @@ static int rename_volumes(struct ubi_device *ubi, re->new_name_len = name_len; memcpy(re->new_name, name, name_len); list_add_tail(&re->list, &rename_list); - dbg_msg("will rename volume %d from \"%s\" to \"%s\"", + dbg_gen("will rename volume %d from \"%s\" to \"%s\"", vol_id, re->desc->vol->name, name); } @@ -812,7 +812,7 @@ static int rename_volumes(struct ubi_device *ubi, re1->remove = 1; re1->desc = desc; list_add(&re1->list, &rename_list); - dbg_msg("will remove volume %d, name \"%s\"", + dbg_gen("will remove volume %d, name \"%s\"", re1->desc->vol->vol_id, re1->desc->vol->name); } @@ -943,7 +943,7 @@ static long ubi_cdev_ioctl(struct file *file, unsigned int cmd, { struct ubi_rnvol_req *req; - dbg_msg("re-name volumes"); + dbg_gen("re-name volumes"); req = kmalloc(sizeof(struct ubi_rnvol_req), GFP_KERNEL); if (!req) { err = -ENOMEM; diff --git a/drivers/mtd/ubi/debug.h b/drivers/mtd/ubi/debug.h index ea4cb7ca335..3dbc877d966 100644 --- a/drivers/mtd/ubi/debug.h +++ b/drivers/mtd/ubi/debug.h @@ -42,11 +42,6 @@ void ubi_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr); pr_debug("UBI DBG " type " (pid %d): " fmt "\n", current->pid, \ ##__VA_ARGS__) -/* Just a debugging messages not related to any specific UBI subsystem */ -#define dbg_msg(fmt, ...) \ - pr_err("UBI DBG (pid %d): %s: " fmt "\n", \ - current->pid, __func__, ##__VA_ARGS__) - /* General debugging messages */ #define dbg_gen(fmt, ...) ubi_dbg_msg("gen", fmt, ##__VA_ARGS__) /* Messages from the eraseblock association sub-system */ diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c index 321541159f5..78a1dcbf210 100644 --- a/drivers/mtd/ubi/io.c +++ b/drivers/mtd/ubi/io.c @@ -177,7 +177,7 @@ retry: * enabled. A corresponding message will be printed * later, when it is has been scrubbed. */ - dbg_msg("fixable bit-flip detected at PEB %d", pnum); + ubi_msg("fixable bit-flip detected at PEB %d", pnum); ubi_assert(len == read); return UBI_IO_BITFLIPS; } diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c index 7e7c20114ed..64b9c56adfa 100644 --- a/drivers/mtd/ubi/vtbl.c +++ b/drivers/mtd/ubi/vtbl.c @@ -304,7 +304,7 @@ static int create_vtbl(struct ubi_device *ubi, struct ubi_attach_info *ai, struct ubi_vid_hdr *vid_hdr; struct ubi_ainf_peb *new_aeb; - ubi_msg("create volume table (copy #%d)", copy + 1); + dbg_gen("create volume table (copy #%d)", copy + 1); vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_KERNEL); if (!vid_hdr) diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index bd05276252f..032fc57f109 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -1201,7 +1201,7 @@ int ubi_wl_scrub_peb(struct ubi_device *ubi, int pnum) { struct ubi_wl_entry *e; - dbg_msg("schedule PEB %d for scrubbing", pnum); + ubi_msg("schedule PEB %d for scrubbing", pnum); retry: spin_lock(&ubi->wl_lock); -- cgit v1.2.3 From cf38aca520741ccdc1365efbef5a4cab33b0a4ac Mon Sep 17 00:00:00 2001 From: Jiang Lu Date: Wed, 8 Aug 2012 10:31:01 +0800 Subject: UBI: load after mtd device drivers Use 'late_initcall()' in UBI to make sure it initializes after MTD drivers. Signed-off-by: Jiang Lu Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/build.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mtd/ubi') diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 8fd85e32506..34977039850 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -1261,7 +1261,7 @@ out: ubi_err("UBI error: cannot initialize UBI, error %d", err); return err; } -module_init(ubi_init); +late_initcall(ubi_init); static void __exit ubi_exit(void) { -- cgit v1.2.3 From 55393ba1bdedc5ded79b34b4cc08898a7776cddb Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 31 Aug 2012 14:43:41 -0700 Subject: UBI: fix trivial typo 'it' => 'is' Signed-off-by: Brian Norris Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/attach.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mtd/ubi') diff --git a/drivers/mtd/ubi/attach.c b/drivers/mtd/ubi/attach.c index da132155c79..f7adf53e4f4 100644 --- a/drivers/mtd/ubi/attach.c +++ b/drivers/mtd/ubi/attach.c @@ -79,7 +79,7 @@ * NAND), it is probably a PEB which was being erased when power cut * happened, so this is corruption type 1. However, this is just a guess, * which might be wrong. - * o Otherwise this it corruption type 2. + * o Otherwise this is corruption type 2. */ #include -- cgit v1.2.3