From 2c171bf13423dc5293188cea7f6c2da1720926e2 Mon Sep 17 00:00:00 2001 From: Pavel Pisa Date: Fri, 19 May 2006 21:48:03 +0100 Subject: [ARM] 3531/1: i.MX/MX1 SD/MMC ensure, that clock are stopped before new command and cleanups Patch from Pavel Pisa There has been problems that for some paths that clock are not stopped during new command programming and initiation. Result is issuing of incorrect command to the card. Some other problems are cleaned too. Noisy report of known ERRATUM #4 has been suppressed. Signed-off-by: Pavel Pisa Signed-off-by: Russell King --- drivers/mmc/au1xmmc.c | 6 +++--- drivers/mmc/imxmmc.c | 24 ++++++++++++++---------- drivers/mmc/mmc.c | 1 + drivers/mmc/mmc_block.c | 1 + drivers/mmc/pxamci.c | 4 ++-- drivers/mmc/wbsd.c | 8 ++++---- 6 files changed, 25 insertions(+), 19 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/au1xmmc.c b/drivers/mmc/au1xmmc.c index 914d62b2406..5dc4bee7abe 100644 --- a/drivers/mmc/au1xmmc.c +++ b/drivers/mmc/au1xmmc.c @@ -310,7 +310,7 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status) } else data->bytes_xfered = - (data->blocks * (1 << data->blksz_bits)) - + (data->blocks * data->blksz) - host->pio.len; } @@ -575,7 +575,7 @@ static int au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data) { - int datalen = data->blocks * (1 << data->blksz_bits); + int datalen = data->blocks * data->blksz; if (dma != 0) host->flags |= HOST_F_DMA; @@ -596,7 +596,7 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data) if (host->dma.len == 0) return MMC_ERR_TIMEOUT; - au_writel((1 << data->blksz_bits) - 1, HOST_BLKSIZE(host)); + au_writel(data->blksz - 1, HOST_BLKSIZE(host)); if (host->flags & HOST_F_DMA) { int i; diff --git a/drivers/mmc/imxmmc.c b/drivers/mmc/imxmmc.c index 79358e223f5..a4eb1d0e7a7 100644 --- a/drivers/mmc/imxmmc.c +++ b/drivers/mmc/imxmmc.c @@ -218,8 +218,10 @@ static int imxmci_busy_wait_for_status(struct imxmci_host *host, if(!loops) return 0; - dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n", - loops, where, *pstat, stat_mask); + /* The busy-wait is expected there for clock <8MHz due to SDHC hardware flaws */ + if(!(stat_mask & STATUS_END_CMD_RESP) || (host->mmc->ios.clock>=8000000)) + dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n", + loops, where, *pstat, stat_mask); return loops; } @@ -333,6 +335,9 @@ static void imxmci_start_cmd(struct imxmci_host *host, struct mmc_command *cmd, WARN_ON(host->cmd != NULL); host->cmd = cmd; + /* Ensure, that clock are stopped else command programming and start fails */ + imxmci_stop_clock(host); + if (cmd->flags & MMC_RSP_BUSY) cmdat |= CMD_DAT_CONT_BUSY; @@ -553,7 +558,7 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat) int trans_done = 0; unsigned int stat = *pstat; - if(host->actual_bus_width == MMC_BUS_WIDTH_4) + if(host->actual_bus_width != MMC_BUS_WIDTH_4) burst_len = 16; else burst_len = 64; @@ -591,8 +596,7 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat) stat = MMC_STATUS; /* Flush extra bytes from FIFO */ - while(flush_len >= 2){ - flush_len -= 2; + while(flush_len && !(stat & STATUS_DATA_TRANS_DONE)){ i = MMC_BUFFER_ACCESS; stat = MMC_STATUS; stat &= ~STATUS_CRC_READ_ERR; /* Stupid but required there */ @@ -746,10 +750,6 @@ static void imxmci_tasklet_fnc(unsigned long data) data_dir_mask = STATUS_DATA_TRANS_DONE; } - imxmci_busy_wait_for_status(host, &stat, - data_dir_mask, - 50, "imxmci_tasklet_fnc data"); - if(stat & data_dir_mask) { clear_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events); imxmci_data_done(host, stat); @@ -865,7 +865,11 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) imxmci_stop_clock(host); MMC_CLK_RATE = (prescaler<<3) | clk; - imxmci_start_clock(host); + /* + * Under my understanding, clock should not be started there, because it would + * initiate SDHC sequencer and send last or random command into card + */ + /*imxmci_start_clock(host);*/ dev_dbg(mmc_dev(host->mmc), "MMC_CLK_RATE: 0x%08x\n", MMC_CLK_RATE); } else { diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 1ca2c8b9c9b..6201f3086a0 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -951,6 +951,7 @@ static void mmc_read_scrs(struct mmc_host *host) data.timeout_ns = card->csd.tacc_ns * 10; data.timeout_clks = card->csd.tacc_clks * 10; data.blksz_bits = 3; + data.blksz = 1 << 3; data.blocks = 1; data.flags = MMC_DATA_READ; data.sg = &sg; diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c index 06bd1f4cb9b..e39cc05c64c 100644 --- a/drivers/mmc/mmc_block.c +++ b/drivers/mmc/mmc_block.c @@ -175,6 +175,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) brq.data.timeout_ns = card->csd.tacc_ns * 10; brq.data.timeout_clks = card->csd.tacc_clks * 10; brq.data.blksz_bits = md->block_bits; + brq.data.blksz = 1 << md->block_bits; brq.data.blocks = req->nr_sectors >> (md->block_bits - 9); brq.stop.opcode = MMC_STOP_TRANSMISSION; brq.stop.arg = 0; diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c index f97b472085c..b49368fd96b 100644 --- a/drivers/mmc/pxamci.c +++ b/drivers/mmc/pxamci.c @@ -119,7 +119,7 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data) nob = 0xffff; writel(nob, host->base + MMC_NOB); - writel(1 << data->blksz_bits, host->base + MMC_BLKLEN); + writel(data->blksz, host->base + MMC_BLKLEN); clks = (unsigned long long)data->timeout_ns * CLOCKRATE; do_div(clks, 1000000000UL); @@ -283,7 +283,7 @@ static int pxamci_data_done(struct pxamci_host *host, unsigned int stat) * data blocks as being in error. */ if (data->error == MMC_ERR_NONE) - data->bytes_xfered = data->blocks << data->blksz_bits; + data->bytes_xfered = data->blocks * data->blksz; else data->bytes_xfered = 0; diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c index 39b3d97f891..8167332d401 100644 --- a/drivers/mmc/wbsd.c +++ b/drivers/mmc/wbsd.c @@ -662,14 +662,14 @@ static void wbsd_prepare_data(struct wbsd_host *host, struct mmc_data *data) unsigned long dmaflags; DBGF("blksz %04x blks %04x flags %08x\n", - 1 << data->blksz_bits, data->blocks, data->flags); + data->blksz, data->blocks, data->flags); DBGF("tsac %d ms nsac %d clk\n", data->timeout_ns / 1000000, data->timeout_clks); /* * Calculate size. */ - host->size = data->blocks << data->blksz_bits; + host->size = data->blocks * data->blksz; /* * Check timeout values for overflow. @@ -696,12 +696,12 @@ static void wbsd_prepare_data(struct wbsd_host *host, struct mmc_data *data) * Two bytes are needed for each data line. */ if (host->bus_width == MMC_BUS_WIDTH_1) { - blksize = (1 << data->blksz_bits) + 2; + blksize = data->blksz + 2; wbsd_write_index(host, WBSD_IDX_PBSMSB, (blksize >> 4) & 0xF0); wbsd_write_index(host, WBSD_IDX_PBSLSB, blksize & 0xFF); } else if (host->bus_width == MMC_BUS_WIDTH_4) { - blksize = (1 << data->blksz_bits) + 2 * 4; + blksize = data->blksz + 2 * 4; wbsd_write_index(host, WBSD_IDX_PBSMSB, ((blksize >> 4) & 0xF0) | WBSD_DATA_WIDTH); -- cgit v1.2.3