From a3ff55026e59687040f00fc35680fc0e774859f4 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sat, 24 Jun 2006 21:21:26 +0100 Subject: [ARM] 3633/1: S3C24XX: s3c2410 gpio bugfix - wrong pin nos Patch from Ben Dooks The s3c2410 gpio functions have a pair of bugs where the code is using the pin function definitions instead of the pin gpio numbers. Also remove the changelog Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/s3c2410-gpio.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/s3c2410-gpio.c b/arch/arm/mach-s3c2410/s3c2410-gpio.c index d5e1caea1d2..17519b3281b 100644 --- a/arch/arm/mach-s3c2410/s3c2410-gpio.c +++ b/arch/arm/mach-s3c2410/s3c2410-gpio.c @@ -18,9 +18,6 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Changelog - * 15-Jan-2006 LCVR Splitted from gpio.c */ #include @@ -47,7 +44,7 @@ int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, config &= 0xff; - pin -= S3C2410_GPG8_EINT16; + pin -= S3C2410_GPG8; reg += pin & ~3; local_irq_save(flags); @@ -75,7 +72,7 @@ EXPORT_SYMBOL(s3c2410_gpio_irqfilter); int s3c2410_gpio_getirq(unsigned int pin) { - if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15_EINT23) + if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15) return -1; /* not valid interrupts */ if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7) -- cgit v1.2.3 From 68d9ab394f06f95fd4ca612c08edf13e410fd8d0 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sat, 24 Jun 2006 21:21:27 +0100 Subject: [ARM] 3635/1: S3C24XX: Add S3C2412 core cpu support Patch from Ben Dooks Add support for the Samsung S3C2412 and S3C2413 range of SoCs. This patch contains the core identification, debug macros, and basic register updates to get these to build. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/Kconfig | 14 +++ arch/arm/mach-s3c2410/Makefile | 4 + arch/arm/mach-s3c2410/cpu.c | 37 +++++++- arch/arm/mach-s3c2410/cpu.h | 1 + arch/arm/mach-s3c2410/s3c2412.c | 195 ++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-s3c2410/s3c2412.h | 29 ++++++ 6 files changed, 277 insertions(+), 3 deletions(-) create mode 100644 arch/arm/mach-s3c2410/s3c2412.c create mode 100644 arch/arm/mach-s3c2410/s3c2412.h (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 7b786d72563..b61af3a6a41 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -127,6 +127,20 @@ config CPU_S3C2410 Support for S3C2410 and S3C2410A family from the S3C24XX line of Samsung Mobile CPUs. +# internal node to signify if we are only dealing with an S3C2412 + +config CPU_S3C2412_ONLY + bool + depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \ + !CPU_S3C2440 && !CPU_S3C2442 && CPU_S3C2412 + default y if CPU_S3C2412 + +config CPU_S3C2412 + bool + depends on ARCH_S3C2410 + help + Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line + config CPU_S3C244X bool depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442) diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 372dbcea143..86219c6df32 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -24,6 +24,10 @@ obj-$(CONFIG_S3C2410_DMA) += dma.o obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o +# S3C2412 support +obj-$(CONFIG_CPU_S3C2412) += s3c2412.o + +# # S3C244X support obj-$(CONFIG_CPU_S3C244X) += s3c244x.o diff --git a/arch/arm/mach-s3c2410/cpu.c b/arch/arm/mach-s3c2410/cpu.c index 52842e6e86e..1c3c6adae6c 100644 --- a/arch/arm/mach-s3c2410/cpu.c +++ b/arch/arm/mach-s3c2410/cpu.c @@ -44,6 +44,7 @@ #include "clock.h" #include "s3c2400.h" #include "s3c2410.h" +#include "s3c2412.h" #include "s3c244x.h" #include "s3c2440.h" #include "s3c2442.h" @@ -62,6 +63,7 @@ struct cpu_table { static const char name_s3c2400[] = "S3C2400"; static const char name_s3c2410[] = "S3C2410"; +static const char name_s3c2412[] = "S3C2412"; static const char name_s3c2440[] = "S3C2440"; static const char name_s3c2442[] = "S3C2442"; static const char name_s3c2410a[] = "S3C2410A"; @@ -113,6 +115,15 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s3c2442_init, .name = name_s3c2442 }, + { + .idcode = 0x32412001, + .idmask = 0xffffffff, + .map_io = s3c2412_map_io, + .init_clocks = s3c2412_init_clocks, + .init_uarts = s3c2412_init_uarts, + .init = s3c2412_init, + .name = name_s3c2412, + }, { .idcode = 0x0, /* S3C2400 doesn't have an idcode */ .idmask = 0xffffffff, @@ -171,6 +182,24 @@ void s3c24xx_set_board(struct s3c24xx_board *b) static struct cpu_table *cpu; +static unsigned long s3c24xx_read_idcode_v5(void) +{ +#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) + return __raw_readl(S3C2412_GSTATUS1); +#else + return 1UL; /* don't look like an 2400 */ +#endif +} + +static unsigned long s3c24xx_read_idcode_v4(void) +{ +#ifndef CONFIG_CPU_S3C2400 + return __raw_readl(S3C2410_GSTATUS1); +#else + return 0UL; +#endif +} + void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) { unsigned long idcode = 0x0; @@ -178,9 +207,11 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) /* initialise the io descriptors we need for initialisation */ iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); -#ifndef CONFIG_CPU_S3C2400 - idcode = __raw_readl(S3C2410_GSTATUS1); -#endif + if (cpu_architecture() >= CPU_ARCH_ARMv5) { + idcode = s3c24xx_read_idcode_v5(); + } else { + idcode = s3c24xx_read_idcode_v4(); + } cpu = s3c_lookup_cpu(idcode); diff --git a/arch/arm/mach-s3c2410/cpu.h b/arch/arm/mach-s3c2410/cpu.h index 21c62dc29bb..b0ed9d2d141 100644 --- a/arch/arm/mach-s3c2410/cpu.h +++ b/arch/arm/mach-s3c2410/cpu.h @@ -74,5 +74,6 @@ extern struct sys_timer s3c24xx_timer; /* system device classes */ extern struct sysdev_class s3c2410_sysclass; +extern struct sysdev_class s3c2412_sysclass; extern struct sysdev_class s3c2440_sysclass; extern struct sysdev_class s3c2442_sysclass; diff --git a/arch/arm/mach-s3c2410/s3c2412.c b/arch/arm/mach-s3c2410/s3c2412.c new file mode 100644 index 00000000000..e24ffd5e478 --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2412.c @@ -0,0 +1,195 @@ +/* linux/arch/arm/mach-s3c2410/s3c2412.c + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks + * + * http://armlinux.simtec.co.uk/. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Modifications: + * 16-May-2003 BJD Created initial version + * 16-Aug-2003 BJD Fixed header files and copyright, added URL + * 05-Sep-2003 BJD Moved to kernel v2.6 + * 18-Jan-2004 BJD Added serial port configuration + * 21-Aug-2004 BJD Added new struct s3c2410_board handler + * 28-Sep-2004 BJD Updates for new serial port bits + * 04-Nov-2004 BJD Updated UART configuration process + * 10-Jan-2005 BJD Removed s3c2410_clock_tick_rate + * 13-Aug-2005 DA Removed UART from initial I/O mappings +*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "s3c2412.h" +#include "cpu.h" +#include "devs.h" +#include "clock.h" +#include "pm.h" + +#ifndef CONFIG_CPU_S3C2412_ONLY +void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO; +#endif + +/* Initial IO mappings */ + +static struct map_desc s3c2412_iodesc[] __initdata = { + IODESC_ENT(CLKPWR), + IODESC_ENT(LCD), + IODESC_ENT(TIMER), + IODESC_ENT(ADC), + IODESC_ENT(WATCHDOG), +}; + +/* uart registration process */ + +void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + s3c24xx_init_uartdevs("s3c2412-uart", s3c2410_uart_resources, cfg, no); + + /* rename devices that are s3c2412/s3c2413 specific */ + s3c_device_sdi.name = "s3c2412-sdi"; + s3c_device_nand.name = "s3c2412-nand"; +} + +/* s3c2412_map_io + * + * register the standard cpu IO areas, and any passed in from the + * machine specific initialisation. +*/ + +void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size) +{ + /* move base of IO */ + + s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10; + + /* register our io-tables */ + + iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc)); + iotable_init(mach_desc, mach_size); +} + +void __init s3c2412_init_clocks(int xtal) +{ + unsigned long tmp; + unsigned long fclk; + unsigned long hclk; + unsigned long pclk; + + /* now we've got our machine bits initialised, work out what + * clocks we've got */ + + fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal*2); + + tmp = __raw_readl(S3C2410_CLKDIVN); + + /* work out clock scalings */ + + hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1); + hclk /= ((tmp & S3C2421_CLKDIVN_ARMDIVN) ? 2 : 1); + pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1); + + /* print brieft summary of clocks, etc */ + + printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", + print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); + + /* initialise the clocks here, to allow other things like the + * console to use them + */ + + s3c24xx_setup_clocks(xtal, fclk, hclk, pclk); + s3c2412_baseclk_add(); +} + +/* need to register class before we actually register the device, and + * we also need to ensure that it has been initialised before any of the + * drivers even try to use it (even if not on an s3c2412 based system) + * as a driver which may support both 2410 and 2440 may try and use it. +*/ + +#ifdef CONFIG_PM +static struct sleep_save s3c2412_sleep[] = { + SAVE_ITEM(S3C2412_DSC0), + SAVE_ITEM(S3C2412_DSC1), + SAVE_ITEM(S3C2413_GPJDAT), + SAVE_ITEM(S3C2413_GPJCON), + SAVE_ITEM(S3C2413_GPJUP), + + /* save the sleep configuration anyway, just in case these + * get damaged during wakeup */ + + SAVE_ITEM(S3C2412_GPBSLPCON), + SAVE_ITEM(S3C2412_GPCSLPCON), + SAVE_ITEM(S3C2412_GPDSLPCON), + SAVE_ITEM(S3C2412_GPESLPCON), + SAVE_ITEM(S3C2412_GPFSLPCON), + SAVE_ITEM(S3C2412_GPGSLPCON), + SAVE_ITEM(S3C2412_GPHSLPCON), + SAVE_ITEM(S3C2413_GPJSLPCON), +}; + +static int s3c2412_suspend(struct sys_device *dev, pm_message_t state) +{ + s3c2410_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); + return 0; +} + +static int s3c2412_resume(struct sys_device *dev) +{ + s3c2410_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); + return 0; +} + +#else +#define s3c2412_suspend NULL +#define s3c2412_resume NULL +#endif + +struct sysdev_class s3c2412_sysclass = { + set_kset_name("s3c2412-core"), + .suspend = s3c2412_suspend, + .resume = s3c2412_resume +}; + +static int __init s3c2412_core_init(void) +{ + return sysdev_class_register(&s3c2412_sysclass); +} + +core_initcall(s3c2412_core_init); + +static struct sys_device s3c2412_sysdev = { + .cls = &s3c2412_sysclass, +}; + +int __init s3c2412_init(void) +{ + printk("S3C2412: Initialising architecture\n"); + + return sysdev_register(&s3c2412_sysdev); +} diff --git a/arch/arm/mach-s3c2410/s3c2412.h b/arch/arm/mach-s3c2410/s3c2412.h new file mode 100644 index 00000000000..c6e56032a6e --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2412.h @@ -0,0 +1,29 @@ +/* arch/arm/mach-s3c2410/s3c2412.h + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks + * + * Header file for s3c2412 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifdef CONFIG_CPU_S3C2412 + +extern int s3c2412_init(void); + +extern void s3c2412_map_io(struct map_desc *mach_desc, int size); + +extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +extern void s3c2412_init_clocks(int xtal); + +extern int s3c2412_baseclk_add(void); +#else +#define s3c2412_init_clocks NULL +#define s3c2412_init_uarts NULL +#define s3c2412_map_io NULL +#define s3c2412_init NULL +#endif -- cgit v1.2.3 From 3434d9d9fc0fec0b96ab128ee0d743b6a0d90160 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sat, 24 Jun 2006 21:21:28 +0100 Subject: [ARM] 3636/1: S3C2412: Add selection of CPU_ARM926 Patch from Ben Dooks Select CONFIG_CPU_ARM926 when CONFIG_CPU_S3C2412 is selected. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 4221d054a1e..ecf5e232a6f 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -61,9 +61,9 @@ config CPU_ARM720T # ARM920T config CPU_ARM920T - bool "Support ARM920T processor" if !ARCH_S3C2410 - depends on ARCH_EP93XX || ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX || ARCH_AAEC2000 || ARCH_AT91RM9200 - default y if ARCH_S3C2410 || ARCH_AT91RM9200 + bool "Support ARM920T processor" + depends on ARCH_EP93XX || ARCH_INTEGRATOR || CPU_S3C2410 || CPU_S3C2440 || CPU_S3C2442 || ARCH_IMX || ARCH_AAEC2000 || ARCH_AT91RM9200 + default y if CPU_S3C2410 || CPU_S3C2440 || CPU_S3C2442 || ARCH_AT91RM9200 select CPU_32v4 select CPU_ABRT_EV4T select CPU_CACHE_V4WT @@ -121,8 +121,8 @@ config CPU_ARM925T # ARM926T config CPU_ARM926T bool "Support ARM926T processor" - depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX - default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX + depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 + default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 select CPU_32v5 select CPU_ABRT_EV5TJ select CPU_CACHE_VIVT -- cgit v1.2.3 From 513846f82829efd5bab5359bdc33509e6386fd49 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sat, 24 Jun 2006 21:21:29 +0100 Subject: [ARM] 3637/1: S3C24XX: Add mpll clock, and set as fclk parent Patch from Ben Dooks Update the clocks with the MPLL clock, and use it as the parent. Also export these to the rest of arch/arm/mach-s3c2410 Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/clock.c | 13 +++++++++++-- arch/arm/mach-s3c2410/clock.h | 2 ++ 2 files changed, 13 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index c5c93c333ac..90a0610b514 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -213,7 +213,7 @@ EXPORT_SYMBOL(clk_set_parent); /* base clocks */ -static struct clk clk_xtal = { +struct clk clk_xtal = { .name = "xtal", .id = -1, .rate = 0, @@ -221,6 +221,11 @@ static struct clk clk_xtal = { .ctrlbit = 0, }; +struct clk clk_mpll = { + .name = "mpll", + .id = -1, +}; + struct clk clk_upll = { .name = "upll", .id = -1, @@ -232,7 +237,7 @@ struct clk clk_f = { .name = "fclk", .id = -1, .rate = 0, - .parent = NULL, + .parent = &clk_mpll, .ctrlbit = 0, }; @@ -413,6 +418,7 @@ int __init s3c24xx_setup_clocks(unsigned long xtal, clk_xtal.rate = xtal; clk_upll.rate = s3c2410_get_pll(__raw_readl(S3C2410_UPLLCON), xtal); + clk_mpll.rate = fclk; clk_h.rate = hclk; clk_p.rate = pclk; clk_f.rate = fclk; @@ -424,6 +430,9 @@ int __init s3c24xx_setup_clocks(unsigned long xtal, if (s3c24xx_register_clock(&clk_xtal) < 0) printk(KERN_ERR "failed to register master xtal\n"); + if (s3c24xx_register_clock(&clk_mpll) < 0) + printk(KERN_ERR "failed to register mpll clock\n"); + if (s3c24xx_register_clock(&clk_upll) < 0) printk(KERN_ERR "failed to register upll clock\n"); diff --git a/arch/arm/mach-s3c2410/clock.h b/arch/arm/mach-s3c2410/clock.h index 9456c81eb5d..7f0ea03e1d4 100644 --- a/arch/arm/mach-s3c2410/clock.h +++ b/arch/arm/mach-s3c2410/clock.h @@ -42,7 +42,9 @@ extern struct clk clk_usb_bus; extern struct clk clk_f; extern struct clk clk_h; extern struct clk clk_p; +extern struct clk clk_mpll; extern struct clk clk_upll; +extern struct clk clk_xtal; /* exports for arch/arm/mach-s3c2410 * -- cgit v1.2.3 From 736855f0c748dacb624070b8d6ffffe4532cf4dc Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sat, 24 Jun 2006 21:21:31 +0100 Subject: [ARM] 3638/1: S3C2412: core clocks Patch from Ben Dooks Clock support for the clocks on the Samsung S3C2412 and S3C2413 SoCs. This provides clock enables and parent selection for all the standard clocks. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/Makefile | 1 + arch/arm/mach-s3c2410/s3c2412-clock.c | 711 ++++++++++++++++++++++++++++++++++ 2 files changed, 712 insertions(+) create mode 100644 arch/arm/mach-s3c2410/s3c2412-clock.c (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 86219c6df32..d934a89179a 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o # S3C2412 support obj-$(CONFIG_CPU_S3C2412) += s3c2412.o +obj-$(CONFIG_CPU_S3C2412) += s3c2412-clock.o # # S3C244X support diff --git a/arch/arm/mach-s3c2410/s3c2412-clock.c b/arch/arm/mach-s3c2410/s3c2412-clock.c new file mode 100644 index 00000000000..c95ed3e1858 --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2412-clock.c @@ -0,0 +1,711 @@ +/* linux/arch/arm/mach-s3c2410/s3c2412-clock.c + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks + * + * S3C2412,S3C2413 Clock control support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include "clock.h" +#include "cpu.h" + +/* We currently have to assume that the system is running + * from the XTPll input, and that all ***REFCLKs are being + * fed from it, as we cannot read the state of OM[4] from + * software. + * + * It would be possible for each board initialisation to + * set the correct muxing at initialisation +*/ + +int s3c2412_clkcon_enable(struct clk *clk, int enable) +{ + unsigned int clocks = clk->ctrlbit; + unsigned long clkcon; + + clkcon = __raw_readl(S3C2410_CLKCON); + + if (enable) + clkcon |= clocks; + else + clkcon &= ~clocks; + + __raw_writel(clkcon, S3C2410_CLKCON); + + return 0; +} + +static int s3c2412_upll_enable(struct clk *clk, int enable) +{ + unsigned long upllcon = __raw_readl(S3C2410_UPLLCON); + unsigned long orig = upllcon; + + if (!enable) + upllcon |= S3C2412_PLLCON_OFF; + else + upllcon &= ~S3C2412_PLLCON_OFF; + + __raw_writel(upllcon, S3C2410_UPLLCON); + + /* allow ~150uS for the PLL to settle and lock */ + + if (enable && (orig & S3C2412_PLLCON_OFF)) + udelay(150); + + return 0; +} + +/* clock selections */ + +/* CPU EXTCLK input */ +static struct clk clk_ext = { + .name = "extclk", + .id = -1, +}; + +static struct clk clk_erefclk = { + .name = "erefclk", + .id = -1, +}; + +static struct clk clk_urefclk = { + .name = "urefclk", + .id = -1, +}; + +static int s3c2412_setparent_usysclk(struct clk *clk, struct clk *parent) +{ + unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); + + if (parent == &clk_urefclk) + clksrc &= ~S3C2412_CLKSRC_USYSCLK_UPLL; + else if (parent == &clk_upll) + clksrc |= S3C2412_CLKSRC_USYSCLK_UPLL; + else + return -EINVAL; + + clk->parent = parent; + + __raw_writel(clksrc, S3C2412_CLKSRC); + return 0; +} + +static struct clk clk_usysclk = { + .name = "usysclk", + .id = -1, + .parent = &clk_xtal, + .set_parent = s3c2412_setparent_usysclk, +}; + +static struct clk clk_mrefclk = { + .name = "mrefclk", + .parent = &clk_xtal, + .id = -1, +}; + +static struct clk clk_mdivclk = { + .name = "mdivclk", + .parent = &clk_xtal, + .id = -1, +}; + +static int s3c2412_setparent_usbsrc(struct clk *clk, struct clk *parent) +{ + unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); + + if (parent == &clk_usysclk) + clksrc &= ~S3C2412_CLKSRC_USBCLK_HCLK; + else if (parent == &clk_h) + clksrc |= S3C2412_CLKSRC_USBCLK_HCLK; + else + return -EINVAL; + + clk->parent = parent; + + __raw_writel(clksrc, S3C2412_CLKSRC); + return 0; +} + +static unsigned long s3c2412_roundrate_usbsrc(struct clk *clk, + unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + int div; + + if (rate > parent_rate) + return parent_rate; + + div = parent_rate / rate; + if (div > 2) + div = 2; + + return parent_rate / div; +} + +static unsigned long s3c2412_getrate_usbsrc(struct clk *clk) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long div = __raw_readl(S3C2410_CLKDIVN); + + return parent_rate / ((div & S3C2412_CLKDIVN_USB48DIV) ? 2 : 1); +} + +static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); + + rate = s3c2412_roundrate_usbsrc(clk, rate); + + if ((parent_rate / rate) == 2) + clkdivn |= S3C2412_CLKDIVN_USB48DIV; + else + clkdivn &= ~S3C2412_CLKDIVN_USB48DIV; + + __raw_writel(clkdivn, S3C2410_CLKDIVN); + return 0; +} + +static struct clk clk_usbsrc = { + .name = "usbsrc", + .id = -1, + .get_rate = s3c2412_getrate_usbsrc, + .set_rate = s3c2412_setrate_usbsrc, + .round_rate = s3c2412_roundrate_usbsrc, + .set_parent = s3c2412_setparent_usbsrc, +}; + +static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent) +{ + unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); + + if (parent == &clk_mdivclk) + clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL; + else if (parent == &clk_upll) + clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL; + else + return -EINVAL; + + clk->parent = parent; + + __raw_writel(clksrc, S3C2412_CLKSRC); + return 0; +} + +static struct clk clk_msysclk = { + .name = "msysclk", + .id = -1, + .set_parent = s3c2412_setparent_msysclk, +}; + +/* these next clocks have an divider immediately after them, + * so we can register them with their divider and leave out the + * intermediate clock stage +*/ +static unsigned long s3c2412_roundrate_clksrc(struct clk *clk, + unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + int div; + + if (rate > parent_rate) + return parent_rate; + + /* note, we remove the +/- 1 calculations as they cancel out */ + + div = (rate / parent_rate); + + if (div < 1) + div = 1; + else if (div > 16) + div = 16; + + return parent_rate / div; +} + +static int s3c2412_setparent_uart(struct clk *clk, struct clk *parent) +{ + unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); + + if (parent == &clk_erefclk) + clksrc &= ~S3C2412_CLKSRC_UARTCLK_MPLL; + else if (parent == &clk_mpll) + clksrc |= S3C2412_CLKSRC_UARTCLK_MPLL; + else + return -EINVAL; + + clk->parent = parent; + + __raw_writel(clksrc, S3C2412_CLKSRC); + return 0; +} + +static unsigned long s3c2412_getrate_uart(struct clk *clk) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long div = __raw_readl(S3C2410_CLKDIVN); + + div &= S3C2412_CLKDIVN_UARTDIV_MASK; + div >>= S3C2412_CLKDIVN_UARTDIV_SHIFT; + + return parent_rate / (div + 1); +} + +static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); + + rate = s3c2412_roundrate_clksrc(clk, rate); + + clkdivn &= ~S3C2412_CLKDIVN_UARTDIV_MASK; + clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_UARTDIV_SHIFT; + + __raw_writel(clkdivn, S3C2410_CLKDIVN); + return 0; +} + +static struct clk clk_uart = { + .name = "uartclk", + .id = -1, + .get_rate = s3c2412_getrate_uart, + .set_rate = s3c2412_setrate_uart, + .set_parent = s3c2412_setparent_uart, + .round_rate = s3c2412_roundrate_clksrc, +}; + +static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent) +{ + unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); + + if (parent == &clk_erefclk) + clksrc &= ~S3C2412_CLKSRC_I2SCLK_MPLL; + else if (parent == &clk_mpll) + clksrc |= S3C2412_CLKSRC_I2SCLK_MPLL; + else + return -EINVAL; + + clk->parent = parent; + + __raw_writel(clksrc, S3C2412_CLKSRC); + return 0; +} + +static unsigned long s3c2412_getrate_i2s(struct clk *clk) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long div = __raw_readl(S3C2410_CLKDIVN); + + div &= S3C2412_CLKDIVN_I2SDIV_MASK; + div >>= S3C2412_CLKDIVN_I2SDIV_SHIFT; + + return parent_rate / (div + 1); +} + +static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); + + rate = s3c2412_roundrate_clksrc(clk, rate); + + clkdivn &= ~S3C2412_CLKDIVN_I2SDIV_MASK; + clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_I2SDIV_SHIFT; + + __raw_writel(clkdivn, S3C2410_CLKDIVN); + return 0; +} + +static struct clk clk_i2s = { + .name = "i2sclk", + .id = -1, + .get_rate = s3c2412_getrate_i2s, + .set_rate = s3c2412_setrate_i2s, + .set_parent = s3c2412_setparent_i2s, + .round_rate = s3c2412_roundrate_clksrc, +}; + +static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent) +{ + unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); + + if (parent == &clk_usysclk) + clksrc &= ~S3C2412_CLKSRC_CAMCLK_HCLK; + else if (parent == &clk_h) + clksrc |= S3C2412_CLKSRC_CAMCLK_HCLK; + else + return -EINVAL; + + clk->parent = parent; + + __raw_writel(clksrc, S3C2412_CLKSRC); + return 0; +} +static unsigned long s3c2412_getrate_cam(struct clk *clk) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long div = __raw_readl(S3C2410_CLKDIVN); + + div &= S3C2412_CLKDIVN_CAMDIV_MASK; + div >>= S3C2412_CLKDIVN_CAMDIV_SHIFT; + + return parent_rate / (div + 1); +} + +static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); + + rate = s3c2412_roundrate_clksrc(clk, rate); + + clkdivn &= ~S3C2412_CLKDIVN_CAMDIV_MASK; + clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_CAMDIV_SHIFT; + + __raw_writel(clkdivn, S3C2410_CLKDIVN); + return 0; +} + +static struct clk clk_cam = { + .name = "camif-upll", /* same as 2440 name */ + .id = -1, + .get_rate = s3c2412_getrate_cam, + .set_rate = s3c2412_setrate_cam, + .set_parent = s3c2412_setparent_cam, + .round_rate = s3c2412_roundrate_clksrc, +}; + +/* standard clock definitions */ + +static struct clk init_clocks_disable[] = { + { + .name = "nand", + .id = -1, + .parent = &clk_h, + .enable = s3c2412_clkcon_enable, + .ctrlbit = S3C2412_CLKCON_NAND, + }, { + .name = "sdi", + .id = -1, + .parent = &clk_p, + .enable = s3c2412_clkcon_enable, + .ctrlbit = S3C2412_CLKCON_SDI, + }, { + .name = "adc", + .id = -1, + .parent = &clk_p, + .enable = s3c2412_clkcon_enable, + .ctrlbit = S3C2412_CLKCON_ADC, + }, { + .name = "i2c", + .id = -1, + .parent = &clk_p, + .enable = s3c2412_clkcon_enable, + .ctrlbit = S3C2412_CLKCON_IIC, + }, { + .name = "iis", + .id = -1, + .parent = &clk_p, + .enable = s3c2412_clkcon_enable, + .ctrlbit = S3C2412_CLKCON_IIS, + }, { + .name = "spi", + .id = -1, + .parent = &clk_p, + .enable = s3c2412_clkcon_enable, + .ctrlbit = S3C2412_CLKCON_SPI, + } +}; + +static struct clk init_clocks[] = { + { + .name = "dma", + .id = 0, + .parent = &clk_h, + .enable = s3c2412_clkcon_enable, + .ctrlbit = S3C2412_CLKCON_DMA0, + }, { + .name = "dma", + .id = 1, + .parent = &clk_h, + .enable = s3c2412_clkcon_enable, + .ctrlbit = S3C2412_CLKCON_DMA1, + }, { + .name = "dma", + .id = 2, + .parent = &clk_h, + .enable = s3c2412_clkcon_enable, + .ctrlbit = S3C2412_CLKCON_DMA2, + }, { + .name = "dma", + .id = 3, + .parent = &clk_h, + .enable = s3c2412_clkcon_enable, + .ctrlbit = S3C2412_CLKCON_DMA3, + }, { + .name = "lcd", + .id = -1, + .parent = &clk_h, + .enable = s3c2412_clkcon_enable, + .ctrlbit = S3C2412_CLKCON_LCDC, + }, { + .name = "gpio", + .id = -1, + .parent = &clk_p, + .enable = s3c2412_clkcon_enable, + .ctrlbit = S3C2412_CLKCON_GPIO, + }, { + .name = "usb-host", + .id = -1, + .parent = &clk_h, + .enable = s3c2412_clkcon_enable, + .ctrlbit = S3C2412_CLKCON_USBH, + }, { + .name = "usb-device", + .id = -1, + .parent = &clk_h, + .enable = s3c2412_clkcon_enable, + .ctrlbit = S3C2412_CLKCON_USBD, + }, { + .name = "timers", + .id = -1, + .parent = &clk_p, + .enable = s3c2412_clkcon_enable, + .ctrlbit = S3C2412_CLKCON_PWMT, + }, { + .name = "uart", + .id = 0, + .parent = &clk_p, + .enable = s3c2412_clkcon_enable, + .ctrlbit = S3C2412_CLKCON_UART0, + }, { + .name = "uart", + .id = 1, + .parent = &clk_p, + .enable = s3c2412_clkcon_enable, + .ctrlbit = S3C2412_CLKCON_UART1, + }, { + .name = "uart", + .id = 2, + .parent = &clk_p, + .enable = s3c2412_clkcon_enable, + .ctrlbit = S3C2412_CLKCON_UART2, + }, { + .name = "rtc", + .id = -1, + .parent = &clk_p, + .enable = s3c2412_clkcon_enable, + .ctrlbit = S3C2412_CLKCON_RTC, + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_p, + .ctrlbit = 0, + }, { + .name = "usb-bus-gadget", + .id = -1, + .parent = &clk_usb_bus, + .enable = s3c2412_clkcon_enable, + .ctrlbit = S3C2412_CLKCON_USB_DEV48, + }, { + .name = "usb-bus-host", + .id = -1, + .parent = &clk_usb_bus, + .enable = s3c2412_clkcon_enable, + .ctrlbit = S3C2412_CLKCON_USB_HOST48, + } +}; + +/* clocks to add where we need to check their parentage */ + +struct clk_init { + struct clk *clk; + unsigned int bit; + struct clk *src_0; + struct clk *src_1; +}; + +struct clk_init clks_src[] __initdata = { + { + .clk = &clk_usysclk, + .bit = S3C2412_CLKSRC_USBCLK_HCLK, + .src_0 = &clk_urefclk, + .src_1 = &clk_upll, + }, { + .clk = &clk_i2s, + .bit = S3C2412_CLKSRC_I2SCLK_MPLL, + .src_0 = &clk_erefclk, + .src_1 = &clk_mpll, + }, { + .clk = &clk_cam, + .bit = S3C2412_CLKSRC_CAMCLK_HCLK, + .src_0 = &clk_usysclk, + .src_1 = &clk_h, + }, { + .clk = &clk_msysclk, + .bit = S3C2412_CLKSRC_MSYSCLK_MPLL, + .src_0 = &clk_mdivclk, + .src_1 = &clk_mpll, + }, { + .clk = &clk_uart, + .bit = S3C2412_CLKSRC_UARTCLK_MPLL, + .src_0 = &clk_erefclk, + .src_1 = &clk_mpll, + }, { + .clk = &clk_usbsrc, + .bit = S3C2412_CLKSRC_USBCLK_HCLK, + .src_0 = &clk_usysclk, + .src_1 = &clk_h, + }, +}; + +/* s3c2412_clk_initparents + * + * Initialise the parents for the clocks that we get at start-time +*/ + +static void __init s3c2412_clk_initparents(void) +{ + unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); + struct clk_init *cip = clks_src; + struct clk *src; + int ptr; + int ret; + + for (ptr = 0; ptr < ARRAY_SIZE(clks_src); ptr++, cip++) { + ret = s3c24xx_register_clock(cip->clk); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + cip->clk->name, ret); + } + + src = (clksrc & cip->bit) ? cip->src_1 : cip->src_0; + + printk(KERN_INFO "%s: parent %s\n", cip->clk->name, src->name); + clk_set_parent(cip->clk, src); + } +} + +/* clocks to add straight away */ + +struct clk *clks[] __initdata = { + &clk_ext, + &clk_usb_bus, + &clk_erefclk, + &clk_urefclk, + &clk_mrefclk, +}; + +int __init s3c2412_baseclk_add(void) +{ + unsigned long clkcon = __raw_readl(S3C2410_CLKCON); + struct clk *clkp; + int ret; + int ptr; + + clk_upll.enable = s3c2412_upll_enable; + clk_usb_bus.parent = &clk_usbsrc; + clk_usb_bus.rate = 0x0; + + s3c2412_clk_initparents(); + + for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { + clkp = clks[ptr]; + + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + } + + /* ensure usb bus clock is within correct rate of 48MHz */ + + if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) { + printk(KERN_INFO "Warning: USB bus clock not at 48MHz\n"); + + /* for the moment, let's use the UPLL, and see if we can + * get 48MHz */ + + clk_set_parent(&clk_usysclk, &clk_upll); + clk_set_parent(&clk_usbsrc, &clk_usysclk); + clk_set_rate(&clk_usbsrc, 48*1000*1000); + } + + printk("S3C2412: upll %s, %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n", + (__raw_readl(S3C2410_UPLLCON) & S3C2412_PLLCON_OFF) ? "off":"on", + print_mhz(clk_get_rate(&clk_upll)), + print_mhz(clk_get_rate(&clk_usb_bus))); + + /* register clocks from clock array */ + + clkp = init_clocks; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { + /* ensure that we note the clock state */ + + clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0; + + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + } + + /* We must be careful disabling the clocks we are not intending to + * be using at boot time, as subsytems such as the LCD which do + * their own DMA requests to the bus can cause the system to lockup + * if they where in the middle of requesting bus access. + * + * Disabling the LCD clock if the LCD is active is very dangerous, + * and therefore the bootloader should be careful to not enable + * the LCD clock if it is not needed. + */ + + /* install (and disable) the clocks we do not need immediately */ + + clkp = init_clocks_disable; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { + + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + + s3c2412_clkcon_enable(clkp, 0); + } + + return 0; +} -- cgit v1.2.3 From 46491c94d39a519178ba8c6b5b5d6a839210124d Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sat, 24 Jun 2006 21:21:32 +0100 Subject: [ARM] 3640/1: S3C2412: Use S3C24XX_DCLKCON instead of S3C2410_DCLKCON Patch from Ben Dooks The current S3C2412 support has moved to using S3C24XX_DCLKCON unless the specific DCLKCON is required (S3C2412_DCLKCON or S3C2410_DKCLKCON) Move the few places using S3C2410_DCLKCON to S3C24XX_DCLKCON Depends on Patch #3635/1 Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/clock.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index 90a0610b514..e13fb677889 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -268,14 +268,14 @@ struct clk clk_usb_bus = { static int s3c24xx_dclk_enable(struct clk *clk, int enable) { - unsigned long dclkcon = __raw_readl(S3C2410_DCLKCON); + unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON); if (enable) dclkcon |= clk->ctrlbit; else dclkcon &= ~clk->ctrlbit; - __raw_writel(dclkcon, S3C2410_DCLKCON); + __raw_writel(dclkcon, S3C24XX_DCLKCON); return 0; } @@ -294,7 +294,7 @@ static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent) clk->parent = parent; - dclkcon = __raw_readl(S3C2410_DCLKCON); + dclkcon = __raw_readl(S3C24XX_DCLKCON); if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) { if (uclk) @@ -308,7 +308,7 @@ static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent) dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK; } - __raw_writel(dclkcon, S3C2410_DCLKCON); + __raw_writel(dclkcon, S3C24XX_DCLKCON); return 0; } -- cgit v1.2.3 From 44cc7c9c15124c4506da96304e5f9eb88200fc35 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sat, 24 Jun 2006 21:21:33 +0100 Subject: [ARM] 3641/1: S3C2412: Fixup gpio register naming Patch from Ben Dooks The current S3C2412 has used to moving S3C24XX_ for the generic form of an register has been moved from the S3C2410. Fixup S3C2410_EXTINTx and S3C2410_EINFLTx to S3C24XX_EXTINTx and S3C24XX_EXTINTx Depends on Patch #3635/1, Patch #3640/1 Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/irq.c | 8 ++++---- arch/arm/mach-s3c2410/s3c2410-gpio.c | 6 +++--- 2 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c index 66d8c068e94..46465742ed7 100644 --- a/arch/arm/mach-s3c2410/irq.c +++ b/arch/arm/mach-s3c2410/irq.c @@ -275,28 +275,28 @@ s3c_irqext_type(unsigned int irq, unsigned int type) if ((irq >= IRQ_EINT0) && (irq <= IRQ_EINT3)) { gpcon_reg = S3C2410_GPFCON; - extint_reg = S3C2410_EXTINT0; + extint_reg = S3C24XX_EXTINT0; gpcon_offset = (irq - IRQ_EINT0) * 2; extint_offset = (irq - IRQ_EINT0) * 4; } else if ((irq >= IRQ_EINT4) && (irq <= IRQ_EINT7)) { gpcon_reg = S3C2410_GPFCON; - extint_reg = S3C2410_EXTINT0; + extint_reg = S3C24XX_EXTINT0; gpcon_offset = (irq - (EXTINT_OFF)) * 2; extint_offset = (irq - (EXTINT_OFF)) * 4; } else if ((irq >= IRQ_EINT8) && (irq <= IRQ_EINT15)) { gpcon_reg = S3C2410_GPGCON; - extint_reg = S3C2410_EXTINT1; + extint_reg = S3C24XX_EXTINT1; gpcon_offset = (irq - IRQ_EINT8) * 2; extint_offset = (irq - IRQ_EINT8) * 4; } else if ((irq >= IRQ_EINT16) && (irq <= IRQ_EINT23)) { gpcon_reg = S3C2410_GPGCON; - extint_reg = S3C2410_EXTINT2; + extint_reg = S3C24XX_EXTINT2; gpcon_offset = (irq - IRQ_EINT8) * 2; extint_offset = (irq - IRQ_EINT16) * 4; } else diff --git a/arch/arm/mach-s3c2410/s3c2410-gpio.c b/arch/arm/mach-s3c2410/s3c2410-gpio.c index 17519b3281b..471a7149001 100644 --- a/arch/arm/mach-s3c2410/s3c2410-gpio.c +++ b/arch/arm/mach-s3c2410/s3c2410-gpio.c @@ -35,7 +35,7 @@ int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, unsigned int config) { - void __iomem *reg = S3C2410_EINFLT0; + void __iomem *reg = S3C24XX_EINFLT0; unsigned long flags; unsigned long val; @@ -58,10 +58,10 @@ int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, /* update filter enable */ - val = __raw_readl(S3C2410_EXTINT2); + val = __raw_readl(S3C24XX_EXTINT2); val &= ~(1 << ((pin * 4) + 3)); val |= on << ((pin * 4) + 3); - __raw_writel(val, S3C2410_EXTINT2); + __raw_writel(val, S3C24XX_EXTINT2); local_irq_restore(flags); -- cgit v1.2.3 From 66c594098db1ee885f486a684b66937e28e792b1 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sat, 24 Jun 2006 21:21:35 +0100 Subject: [ARM] 3642/1: S3C24XX: Add machine SMDK2413 Patch from Ben Dooks Add basic support for the Samsung/Aiji SMDK2413 Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/Kconfig | 6 ++ arch/arm/mach-s3c2410/Makefile | 1 + arch/arm/mach-s3c2410/mach-smdk2413.c | 126 ++++++++++++++++++++++++++++++++++ 3 files changed, 133 insertions(+) create mode 100644 arch/arm/mach-s3c2410/mach-smdk2413.c (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index b61af3a6a41..f5d9cd498a5 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -81,6 +81,12 @@ config SMDK2440_CPU2442 depends on ARCH_S3C2440 select CPU_S3C2442 +config MACH_SMDK2413 + bool "SMDK2413" + select CPU_S3C2412 + select MACH_SMDK + help + Say Y here if you are using an SMDK2413 config MACH_VR1000 bool "Thorcom VR1000" diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index d934a89179a..0c7938645df 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -62,6 +62,7 @@ obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o obj-$(CONFIG_ARCH_H1940) += mach-h1940.o obj-$(CONFIG_MACH_N30) += mach-n30.o obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o +obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o diff --git a/arch/arm/mach-s3c2410/mach-smdk2413.c b/arch/arm/mach-s3c2410/mach-smdk2413.c new file mode 100644 index 00000000000..b7ef7d3c54a --- /dev/null +++ b/arch/arm/mach-s3c2410/mach-smdk2413.c @@ -0,0 +1,126 @@ +/* linux/arch/arm/mach-s3c2410/mach-smdk2413.c + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks + * + * Thanks to Dimity Andric (TomTom) and Steven Ryu (Samsung) for the + * loans of SMDK2413 to work with. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +//#include +#include +#include +#include + +#include +#include + +#include "s3c2410.h" +#include "s3c2412.h" +#include "clock.h" +#include "devs.h" +#include "cpu.h" + +#include "common-smdk.h" + +static struct map_desc smdk2413_iodesc[] __initdata = { +}; + +static struct s3c2410_uartcfg smdk2413_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + }, + /* IR port */ + [2] = { + .hwport = 2, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x43, + .ufcon = 0x51, + } +}; + +static struct platform_device *smdk2413_devices[] __initdata = { + &s3c_device_usb, + //&s3c_device_lcd, + &s3c_device_wdt, + &s3c_device_i2c, + &s3c_device_iis, +}; + +static struct s3c24xx_board smdk2413_board __initdata = { + .devices = smdk2413_devices, + .devices_count = ARRAY_SIZE(smdk2413_devices) +}; + +static void __init smdk2413_fixup(struct machine_desc *desc, + struct tag *tags, char **cmdline, + struct meminfo *mi) +{ + if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) { + mi->nr_banks=1; + mi->bank[0].start = 0x30000000; + mi->bank[0].size = SZ_64M; + mi->bank[0].node = 0; + } +} + +static void __init smdk2413_map_io(void) +{ + s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc)); + s3c24xx_init_clocks(12000000); + s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs)); + s3c24xx_set_board(&smdk2413_board); +} + +static void __init smdk2413_machine_init(void) +{ + smdk_machine_init(); +} + +MACHINE_START(S3C2413, "SMDK2413") + /* Maintainer: Ben Dooks */ + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + + .fixup = smdk2413_fixup, + .init_irq = s3c24xx_init_irq, + .map_io = smdk2413_map_io, + .init_machine = smdk2413_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END -- cgit v1.2.3 From 22346aea8d39372d6fd207468701e90bf546b882 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sat, 24 Jun 2006 21:21:36 +0100 Subject: [ARM] 3643/1: S3C2410: Add new usb clocks Patch from Ben Dooks Make the S3C2410 use the same usb clock naming as the S3C2412 Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/s3c2410-clock.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/s3c2410-clock.c b/arch/arm/mach-s3c2410/s3c2410-clock.c index fd17c60e113..99718663318 100644 --- a/arch/arm/mach-s3c2410/s3c2410-clock.c +++ b/arch/arm/mach-s3c2410/s3c2410-clock.c @@ -182,7 +182,15 @@ static struct clk init_clocks[] = { .id = -1, .parent = &clk_p, .ctrlbit = 0, - } + }, { + .name = "usb-bus-host", + .id = -1, + .parent = &clk_usb_bus, + }, { + .name = "usb-bus-gadget", + .id = -1, + .parent = &clk_usb_bus, + }, }; /* s3c2410_baseclk_add() -- cgit v1.2.3 From a019f4a9a7b4ec4986918e9aefa06815cf77b714 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sat, 24 Jun 2006 21:21:37 +0100 Subject: [ARM] 3645/1: S3C2412: irq support for external interrupts Patch from Ben Dooks Move the decoding of the IRQ_EXT4 and above out of the entry macro, and into an chained irq handler as the EXTINT registers move depending on the CPU being used. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/irq.c | 49 ++++++++++++++++++++++++++++++--------------- 1 file changed, 33 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c index 46465742ed7..6822dc7f779 100644 --- a/arch/arm/mach-s3c2410/irq.c +++ b/arch/arm/mach-s3c2410/irq.c @@ -191,13 +191,9 @@ static struct irqchip s3c_irq_chip = { .ack = s3c_irq_ack, .mask = s3c_irq_mask, .unmask = s3c_irq_unmask, - .set_wake = s3c_irq_wake + .set_wake = s3c_irq_wake }; -/* S3C2410_EINTMASK - * S3C2410_EINTPEND - */ - static void s3c_irqext_mask(unsigned int irqno) { @@ -205,9 +201,9 @@ s3c_irqext_mask(unsigned int irqno) irqno -= EXTINT_OFF; - mask = __raw_readl(S3C2410_EINTMASK); + mask = __raw_readl(S3C24XX_EINTMASK); mask |= ( 1UL << irqno); - __raw_writel(mask, S3C2410_EINTMASK); + __raw_writel(mask, S3C24XX_EINTMASK); if (irqno <= (IRQ_EINT7 - EXTINT_OFF)) { /* check to see if all need masking */ @@ -232,11 +228,11 @@ s3c_irqext_ack(unsigned int irqno) bit = 1UL << (irqno - EXTINT_OFF); - mask = __raw_readl(S3C2410_EINTMASK); + mask = __raw_readl(S3C24XX_EINTMASK); - __raw_writel(bit, S3C2410_EINTPEND); + __raw_writel(bit, S3C24XX_EINTPEND); - req = __raw_readl(S3C2410_EINTPEND); + req = __raw_readl(S3C24XX_EINTPEND); req &= ~mask; /* not sure if we should be acking the parent irq... */ @@ -257,9 +253,9 @@ s3c_irqext_unmask(unsigned int irqno) irqno -= EXTINT_OFF; - mask = __raw_readl(S3C2410_EINTMASK); + mask = __raw_readl(S3C24XX_EINTMASK); mask &= ~( 1UL << irqno); - __raw_writel(mask, S3C2410_EINTMASK); + __raw_writel(mask, S3C24XX_EINTMASK); s3c_irq_unmask((irqno <= (IRQ_EINT7 - EXTINT_OFF)) ? IRQ_EINT4t7 : IRQ_EINT8t23); } @@ -572,6 +568,23 @@ s3c_irq_demux_uart2(unsigned int irq, s3c_irq_demux_uart(IRQ_S3CUART_RX2, regs); } +static void +s3c_irq_demux_extint(unsigned int irq, + struct irqdesc *desc, + struct pt_regs *regs) +{ + unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND); + unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK); + + eintpnd &= ~eintmsk; + + if (eintpnd) { + irq = fls(eintpnd); + irq += (IRQ_EINT4 - (4 + 1)); + + desc_handle_irq(irq, irq_desc + irq, regs); + } +} /* s3c24xx_init_irq * @@ -591,12 +604,12 @@ void __init s3c24xx_init_irq(void) last = 0; for (i = 0; i < 4; i++) { - pend = __raw_readl(S3C2410_EINTPEND); + pend = __raw_readl(S3C24XX_EINTPEND); if (pend == 0 || pend == last) break; - __raw_writel(pend, S3C2410_EINTPEND); + __raw_writel(pend, S3C24XX_EINTPEND); printk("irq: clearing pending ext status %08x\n", (int)pend); last = pend; } @@ -630,12 +643,14 @@ void __init s3c24xx_init_irq(void) irqdbf("s3c2410_init_irq: registering s3c2410 interrupt handlers\n"); - for (irqno = IRQ_BATT_FLT; irqno <= IRQ_ADCPARENT; irqno++) { + for (irqno = IRQ_EINT4t7; irqno <= IRQ_ADCPARENT; irqno++) { /* set all the s3c2410 internal irqs */ switch (irqno) { /* deal with the special IRQs (cascaded) */ + case IRQ_EINT4t7: + case IRQ_EINT8t23: case IRQ_UART0: case IRQ_UART1: case IRQ_UART2: @@ -659,12 +674,14 @@ void __init s3c24xx_init_irq(void) /* setup the cascade irq handlers */ + set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint); + set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint); + set_irq_chained_handler(IRQ_UART0, s3c_irq_demux_uart0); set_irq_chained_handler(IRQ_UART1, s3c_irq_demux_uart1); set_irq_chained_handler(IRQ_UART2, s3c_irq_demux_uart2); set_irq_chained_handler(IRQ_ADCPARENT, s3c_irq_demux_adc); - /* external interrupts */ for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) { -- cgit v1.2.3 From c9b949a734adef5d05cbaa0b0546b924ca517155 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sat, 24 Jun 2006 21:22:35 +0100 Subject: [ARM] 3647/1: S3C24XX: add Osiris to the list of simtec pm machines Patch from Ben Dooks Enable power management for Simtec Osiris Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/pm-simtec.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/pm-simtec.c b/arch/arm/mach-s3c2410/pm-simtec.c index 4c7ccef6c20..7b244566a43 100644 --- a/arch/arm/mach-s3c2410/pm-simtec.c +++ b/arch/arm/mach-s3c2410/pm-simtec.c @@ -48,7 +48,8 @@ static __init int pm_simtec_init(void) /* check which machine we are running on */ - if (!machine_is_bast() && !machine_is_vr1000() && !machine_is_anubis()) + if (!machine_is_bast() && !machine_is_vr1000() && + !machine_is_anubis() && !machine_is_osiris()) return 0; printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n"); -- cgit v1.2.3