From 0f74da3f4bd91da4f8d3f79c9dc39a781cc7ae82 Mon Sep 17 00:00:00 2001 From: Lei Wen Date: Mon, 30 Jul 2012 21:59:41 +0800 Subject: ARM: ttc_dkb: add nand support Add NAND support for dkb platform. Signed-off-by: Lei Wen Signed-off-by: Haojian Zhuang --- arch/arm/mach-mmp/ttc_dkb.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index 7a7de2b12a6..ce55fd8821c 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -177,12 +177,22 @@ static struct mv_usb_platform_data ttc_usb_pdata = { #endif #endif +#ifdef CONFIG_MTD_NAND_PXA3xx +static struct pxa3xx_nand_platform_data dkb_nand_info = { + .enable_arbiter = 1, + .num_cs = 1, +}; +#endif + static void __init ttc_dkb_init(void) { mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config)); /* on-chip devices */ pxa910_add_uart(1); +#ifdef CONFIG_MTD_NAND_PXA3xx + pxa910_add_nand(&dkb_nand_info); +#endif /* off-chip devices */ pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info)); -- cgit v1.2.3 From 688b5cbb81c1d5fc4aaaed47cde3f86fbb1472fe Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 3 Jul 2012 15:44:57 -0300 Subject: ARM: mx27pdk: Add audio support mx27pdk has a mc13783 audio codec. Add support for it. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/Kconfig | 1 + arch/arm/mach-imx/mach-mx27_3ds.c | 21 ++++++++++++++++++++- 2 files changed, 21 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index afd542ad6f9..61faf76b185 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -303,6 +303,7 @@ config MACH_MX27_3DS select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MX2_CAMERA select IMX_HAVE_PLATFORM_MXC_EHCI diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 58c24c1a7ab..05996f39005 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -158,6 +158,11 @@ static const int mx27pdk_pins[] __initconst = { PB21_PF_CSI_HSYNC, CSI_PWRDWN | GPIO_GPIO | GPIO_OUT, CSI_RESET | GPIO_GPIO | GPIO_OUT, + /* SSI4 */ + PC16_PF_SSI4_FS, + PC17_PF_SSI4_RXD, + PC18_PF_SSI4_TXD, + PC19_PF_SSI4_CLK, }; static struct gpio mx27_3ds_camera_gpios[] = { @@ -329,13 +334,24 @@ static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = { }; /* MC13783 */ +static struct mc13xxx_codec_platform_data mx27_3ds_codec = { + .dac_ssi_port = MC13783_SSI1_PORT, + .adc_ssi_port = MC13783_SSI1_PORT, +}; + static struct mc13xxx_platform_data mc13783_pdata = { .regulators = { .regulators = mx27_3ds_regulators, .num_regulators = ARRAY_SIZE(mx27_3ds_regulators), }, - .flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC, + .flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC | + MC13XXX_USE_CODEC, + .codec = &mx27_3ds_codec, +}; + +static struct imx_ssi_platform_data mx27_3ds_ssi_pdata = { + .flags = IMX_SSI_DMA | IMX_SSI_NET, }; /* SPI */ @@ -512,6 +528,9 @@ static void __init mx27pdk_init(void) } imx27_add_mx2_camera(&mx27_3ds_cam_pdata); + imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata); + + imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0); } static void __init mx27pdk_timer_init(void) -- cgit v1.2.3 From 853b1eb8303753be72052140023528854cba29dd Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 10 Aug 2012 13:03:16 +0900 Subject: ARM: S3C64XX: Update configuration for WM5102 module on Cragganmore SPI is also connected on the board, use that instead of I2C as it's much faster. Also define platform data now the core driver is in mainline. Signed-off-by: Mark Brown [kgene.kim@samsung.com: fixed build error by inclusion missed header] Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/mach-crag6410-module.c | 36 ++++++++++++++++++++++++---- 1 file changed, 31 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 9e382e7c77c..7f4f9ebee25 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -16,6 +16,7 @@ #include #include #include +#include #include @@ -181,9 +182,33 @@ static const struct i2c_board_info wm1277_devs[] = { }, }; -static const struct i2c_board_info wm5102_devs[] = { - { I2C_BOARD_INFO("wm5102", 0x1a), - .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, }, +static struct arizona_pdata wm5102_pdata = { + .ldoena = S3C64XX_GPN(7), + .gpio_base = CODEC_GPIO_BASE, + .irq_active_high = true, + .micd_pol_gpio = CODEC_GPIO_BASE + 4, + .gpio_defaults = { + [2] = 0x10000, /* AIF3TXLRCLK */ + [3] = 0x4, /* OPCLK */ + }, +}; + +static struct s3c64xx_spi_csinfo wm5102_spi_csinfo = { + .line = S3C64XX_GPN(5), +}; + +static struct spi_board_info wm5102_spi_devs[] = { + [0] = { + .modalias = "wm5102", + .max_speed_hz = 10 * 1000 * 1000, + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_0, + .irq = GLENFARCLAS_PMIC_IRQ_BASE + + WM831X_IRQ_GPIO_2, + .controller_data = &wm5102_spi_csinfo, + .platform_data = &wm5102_pdata, + }, }; static const struct i2c_board_info wm6230_i2c_devs[] = { @@ -223,8 +248,9 @@ static __devinitdata const struct { { .id = 0x3c, .name = "1273-EV1 Longmorn" }, { .id = 0x3d, .name = "1277-EV1 Littlemill", .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) }, - { .id = 0x3e, .name = "WM5102-6271-EV1-CS127", - .i2c_devs = wm5102_devs, .num_i2c_devs = ARRAY_SIZE(wm5102_devs) }, + { .id = 0x3e, .name = "WM5102-6271-EV1-CS127 Amrut", + .spi_devs = wm5102_spi_devs, + .num_spi_devs = ARRAY_SIZE(wm5102_spi_devs) }, }; static __devinit int wlf_gf_module_probe(struct i2c_client *i2c, -- cgit v1.2.3 From 25752b78ee9ec8e456b307f5b795e864b2ceaf19 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 10 Aug 2012 13:03:18 +0900 Subject: ARM: S3C64XX: Register audio platform devices for Bells on Cragganmore Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/mach-crag6410.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 09cd81207a3..a095f7f6009 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -287,6 +287,16 @@ static struct platform_device littlemill_device = { .id = -1, }; +static struct platform_device bells_wm5102_device = { + .name = "bells", + .id = 0, +}; + +static struct platform_device bells_wm5110_device = { + .name = "bells", + .id = 1, +}; + static struct regulator_consumer_supply wallvdd_consumers[] = { REGULATOR_SUPPLY("SPKVDD", "1-001a"), REGULATOR_SUPPLY("SPKVDD1", "1-001a"), @@ -359,6 +369,8 @@ static struct platform_device *crag6410_devices[] __initdata = { &tobermory_device, &littlemill_device, &lowland_device, + &bells_wm5102_device, + &bells_wm5110_device, &wallvdd_device, }; -- cgit v1.2.3 From fa4cd2a880f842ebbeeafc58e107a85e3c1913ce Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Fri, 10 Aug 2012 23:49:41 +0800 Subject: ARM: mmp: implement DEBUG_LL port choice DEBUG_LL port must be choiced in arch-mmp. DEBUG_LL port should be UART2 in TTC DKB. And it should be UART3 in brownstone. Signed-off-by: Haojian Zhuang --- arch/arm/Kconfig.debug | 14 ++++++++++++++ arch/arm/mach-mmp/include/mach/debug-macro.S | 12 ++++++++++-- 2 files changed, 24 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index f15f82bf3a5..0919191b8aa 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -224,6 +224,20 @@ choice Say Y here if you want kernel low-level debugging support on i.MX6Q UART4. + config DEBUG_MMP_UART2 + bool "Kernel low-level debugging message via MMP UART2" + depends on ARCH_MMP + help + Say Y here if you want kernel low-level debugging support + on MMP UART2. + + config DEBUG_MMP_UART3 + bool "Kernel low-level debugging message via MMP UART3" + depends on ARCH_MMP + help + Say Y here if you want kernel low-level debugging support + on MMP UART3. + config DEBUG_MSM_UART1 bool "Kernel low-level debugging messages via MSM UART1" depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S index b6f14d203c2..5c3cc29688a 100644 --- a/arch/arm/mach-mmp/include/mach/debug-macro.S +++ b/arch/arm/mach-mmp/include/mach/debug-macro.S @@ -9,13 +9,21 @@ * published by the Free Software Foundation. */ +#if defined(CONFIG_DEBUG_MMP_UART2) +#define MMP_UART_OFFSET 0x00017000 +#elif defined(CONFIG_DEBUG_MMP_UART3) +#define MMP_UART_OFFSET 0x00018000 +#else +#error "Select uart for DEBUG_LL" +#endif + #include .macro addruart, rp, rv, tmp ldr \rp, =APB_PHYS_BASE @ physical ldr \rv, =APB_VIRT_BASE @ virtual - orr \rp, \rp, #0x00017000 - orr \rv, \rv, #0x00017000 + orr \rp, \rp, #MMP_UART_OFFSET + orr \rv, \rv, #MMP_UART_OFFSET .endm #define UART_SHIFT 2 -- cgit v1.2.3 From ec9b22eebbcf6ff1dfc121ec1e76bbb98a0418b4 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Thu, 16 Aug 2012 17:49:08 +0800 Subject: ARM: mmp: enable debug uart port in defconfig Enable DEBUG_LL & debug uart port in pxa910 & mmp2 defconfig. Signed-off-by: Haojian Zhuang --- arch/arm/configs/mmp2_defconfig | 5 ++++- arch/arm/configs/pxa910_defconfig | 4 +++- 2 files changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig index 5a584520db2..f1cb95e58af 100644 --- a/arch/arm/configs/mmp2_defconfig +++ b/arch/arm/configs/mmp2_defconfig @@ -16,7 +16,7 @@ CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255" +CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255 earlyprintk" CONFIG_VFP=y CONFIG_NET=y CONFIG_PACKET=y @@ -90,6 +90,9 @@ CONFIG_DEBUG_INFO=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_DYNAMIC_DEBUG is not set CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y +CONFIG_DEBUG_MMP_UART3=y +CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_ERRORS=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig index 1cd381e1d47..191118caa5c 100644 --- a/arch/arm/configs/pxa910_defconfig +++ b/arch/arm/configs/pxa910_defconfig @@ -17,7 +17,7 @@ CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M" +CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M earlyprintk" CONFIG_FPE_NWFPE=y CONFIG_NET=y CONFIG_PACKET=y @@ -66,5 +66,7 @@ CONFIG_DEBUG_INFO=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y +CONFIG_DEBUG_MMP_UART2=y +CONFIG_EARLY_PRINTK=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRC_CCITT=y -- cgit v1.2.3 From 894cda18de4b8963b16bc706fea53566df6d7b05 Mon Sep 17 00:00:00 2001 From: Phil Edworthy Date: Mon, 6 Aug 2012 13:31:05 +0100 Subject: ARM: shmobile: marzen: add SDHI0 support [horms@verge.net.au: moved defconfig portion into a separate patch] [horms@verge.net.au: added "ARM: shmobile:" to title] Signed-off-by: Phil Edworthy Tested-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-marzen.c | 52 ++++++++++++++++++++++++++++++++++- 1 file changed, 51 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 3a528cf4366..dec3ffc9df0 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -30,6 +30,8 @@ #include #include #include +#include +#include #include #include #include @@ -39,6 +41,12 @@ #include #include +/* Fixed 3.3V regulator to be used by SDHI0 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = { + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + /* Dummy supplies, where voltage doesn't matter */ static struct regulator_consumer_supply dummy_supplies[] = { REGULATOR_SUPPLY("vddvario", "smsc911x"), @@ -75,13 +83,45 @@ static struct platform_device eth_device = { .num_resources = ARRAY_SIZE(smsc911x_resources), }; +static struct resource sdhi0_resources[] = { + [0] = { + .name = "sdhi0", + .start = 0xffe4c000, + .end = 0xffe4c0ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(104), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sh_mobile_sdhi_info sdhi0_platform_data = { + .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT, + .tmio_caps = MMC_CAP_SD_HIGHSPEED, +}; + +static struct platform_device sdhi0_device = { + .name = "sh_mobile_sdhi", + .num_resources = ARRAY_SIZE(sdhi0_resources), + .resource = sdhi0_resources, + .id = 0, + .dev = { + .platform_data = &sdhi0_platform_data, + } +}; + static struct platform_device *marzen_devices[] __initdata = { ð_device, + &sdhi0_device, }; static void __init marzen_init(void) { - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + regulator_register_fixed(0, dummy_supplies, + ARRAY_SIZE(dummy_supplies)); r8a7779_pinmux_init(); @@ -97,6 +137,16 @@ static void __init marzen_init(void) gpio_request(GPIO_FN_EX_CS0, NULL); /* nCS */ gpio_request(GPIO_FN_IRQ1_B, NULL); /* IRQ + PME */ + /* SD0 (CN20) */ + gpio_request(GPIO_FN_SD0_CLK, NULL); + gpio_request(GPIO_FN_SD0_CMD, NULL); + gpio_request(GPIO_FN_SD0_DAT0, NULL); + gpio_request(GPIO_FN_SD0_DAT1, NULL); + gpio_request(GPIO_FN_SD0_DAT2, NULL); + gpio_request(GPIO_FN_SD0_DAT3, NULL); + gpio_request(GPIO_FN_SD0_CD, NULL); + gpio_request(GPIO_FN_SD0_WP, NULL); + r8a7779_add_standard_devices(); platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices)); } -- cgit v1.2.3 From 90b85afcba0ec6242172c636691962ab115e296c Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 29 Aug 2012 18:58:15 -0700 Subject: ARM: shmobile: marzen: fixup regulator id for smsc911x regulator id = 0 is used for sh_mobile_sdhi. smsc911x's regulator can use id = 1 Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-marzen.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index dec3ffc9df0..cbf9f25ed97 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -120,7 +120,7 @@ static void __init marzen_init(void) { regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, ARRAY_SIZE(fixed3v3_power_consumers), 3300000); - regulator_register_fixed(0, dummy_supplies, + regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies)); r8a7779_pinmux_init(); -- cgit v1.2.3 From eb8ca943bae2b84c3fc14dfd7a908cb334465fef Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 27 Aug 2012 19:00:15 -0700 Subject: ARM: shmobile: marzen: enable thermal sensor Marzen board can measure its thermal by this patch. cat /sys/class/thermal/thermal_zoneX/temp Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/configs/marzen_defconfig | 2 ++ arch/arm/mach-shmobile/board-marzen.c | 16 ++++++++++++++++ 2 files changed, 18 insertions(+) (limited to 'arch') diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig index 864f9a5c39d..f513acedc10 100644 --- a/arch/arm/configs/marzen_defconfig +++ b/arch/arm/configs/marzen_defconfig @@ -68,6 +68,8 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HW_RANDOM is not set CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_RCAR_THERMAL=y CONFIG_SSB=y # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index cbf9f25ed97..2e884b66ec1 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -111,9 +111,25 @@ static struct platform_device sdhi0_device = { } }; +/* Thermal */ +static struct resource thermal_resources[] = { + [0] = { + .start = 0xFFC48000, + .end = 0xFFC48038 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device thermal_device = { + .name = "rcar_thermal", + .resource = thermal_resources, + .num_resources = ARRAY_SIZE(thermal_resources), +}; + static struct platform_device *marzen_devices[] __initdata = { ð_device, &sdhi0_device, + &thermal_device, }; static void __init marzen_init(void) -- cgit v1.2.3 From aaca483f765e32325f2539333c628be68a34d893 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Sat, 8 Sep 2012 10:09:03 +0900 Subject: ARM: dts: Use active low flag for gpio-keys on Origen Commit f447ed8b31d ("gpio: samsung: add flags specifier to device-tree binding") adds a flag to represent active low state for gpio line. Since gpio-keys on Origen board are active low, using this flag to represent the same. Signed-off-by: Sachin Kamat Reviewed-by: Thomas Abraham Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4210-origen.dts | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 0c49caa0997..c37edf094ad 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -62,31 +62,31 @@ up { label = "Up"; - gpios = <&gpx2 0 0 0 2>; + gpios = <&gpx2 0 0 0x10000 2>; linux,code = <103>; }; down { label = "Down"; - gpios = <&gpx2 1 0 0 2>; + gpios = <&gpx2 1 0 0x10000 2>; linux,code = <108>; }; back { label = "Back"; - gpios = <&gpx1 7 0 0 2>; + gpios = <&gpx1 7 0 0x10000 2>; linux,code = <158>; }; home { label = "Home"; - gpios = <&gpx1 6 0 0 2>; + gpios = <&gpx1 6 0 0x10000 2>; linux,code = <102>; }; menu { label = "Menu"; - gpios = <&gpx1 5 0 0 2>; + gpios = <&gpx1 5 0 0x10000 2>; linux,code = <139>; }; }; -- cgit v1.2.3 From 162b172ddd7aacc754253f97b1b1ee75344bc22c Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Sat, 8 Sep 2012 10:09:03 +0900 Subject: ARM: dts: Add heartbeat gpio-leds support to Origen Signed-off-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4210-origen.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index c37edf094ad..d69a7999a12 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -91,6 +91,14 @@ }; }; + leds { + compatible = "gpio-leds"; + status { + gpios = <&gpx1 3 0 0x10000 2>; + linux,default-trigger = "heartbeat"; + }; + }; + keypad@100A0000 { status = "disabled"; }; -- cgit v1.2.3 From 02c5f160c636d07f26ba273a006fc0dcfeec2e74 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 7 Sep 2012 15:24:09 +1000 Subject: ARM: ks8695: add board support for the SnapGear boards based on the KS8695 A number of boards produced by SnapGear are based on the Micrel KS8695 SoC. Add board support to the KS8695 kernel code to support them. The following machine type entries will need to be added back into the mach-types file with these in mainline: lite300 MACH_LITE300 LITE300 408 se4200 MACH_SE4200 SE4200 809 sg310 MACH_SG310 SG310 1564 Signed-off-by: Greg Ungerer Acked-by: Arnd Bergmann Signed-off-by: Olof Johansson --- arch/arm/mach-ks8695/Kconfig | 22 ++++++++ arch/arm/mach-ks8695/Makefile | 3 + arch/arm/mach-ks8695/board-sg.c | 121 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 146 insertions(+) create mode 100644 arch/arm/mach-ks8695/board-sg.c (limited to 'arch') diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig index f5c39a8c2b0..f6b737eb79f 100644 --- a/arch/arm/mach-ks8695/Kconfig +++ b/arch/arm/mach-ks8695/Kconfig @@ -21,6 +21,28 @@ config MACH_ACS5K say 'Y' here if you want your kernel to run on the Brivo Systems LLC, ACS-5000 Master board. +config MACH_LITE300 + bool "SecureComputing SG300" + help + Say 'Y' here if you want your kernel to support the + SecureComputing / SnapGear SG300 VPN Internet Router. + See http://www.securecomputing.com for more details. + +config MACH_SG310 + bool "McAfee SG310" + help + Say 'Y' here if you want your kernel to support the + McAfee / SnapGear SG310 VPN Internet Router. + See http://www.mcafee.com for more details. + +config MACH_SE4200 + bool "SecureComputing SE4200" + help + Say 'Y' here if you want your kernel to support the + SecureComputing / SnapGear SE4200 Secure Wireless VPN + Internet Router. + See http://www.securecomputing.com for more details. + endmenu endif diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile index 853efd9133c..9673c0ccc5d 100644 --- a/arch/arm/mach-ks8695/Makefile +++ b/arch/arm/mach-ks8695/Makefile @@ -18,3 +18,6 @@ obj-$(CONFIG_LEDS) += leds.o obj-$(CONFIG_MACH_KS8695) += board-micrel.o obj-$(CONFIG_MACH_DSM320) += board-dsm320.o obj-$(CONFIG_MACH_ACS5K) += board-acs5k.o +obj-$(CONFIG_MACH_LITE300) += board-sg.o +obj-$(CONFIG_MACH_SG310) += board-sg.o +obj-$(CONFIG_MACH_SE4200) += board-sg.o diff --git a/arch/arm/mach-ks8695/board-sg.c b/arch/arm/mach-ks8695/board-sg.c new file mode 100644 index 00000000000..f35b98b5bf3 --- /dev/null +++ b/arch/arm/mach-ks8695/board-sg.c @@ -0,0 +1,121 @@ +/* + * board-sg.c -- support for the SnapGear KS8695 based boards + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "generic.h" + +/* + * The SG310 machine type is fitted with a conventional 8MB Strataflash + * device. Define its partitioning. + */ +#define FL_BASE 0x02000000 +#define FL_SIZE SZ_8M + +static struct mtd_partition sg_mtd_partitions[] = { + [0] = { + .name = "SnapGear Boot Loader", + .size = SZ_128K, + }, + [1] = { + .name = "SnapGear non-volatile configuration", + .size = SZ_512K, + .offset = SZ_256K, + }, + [2] = { + .name = "SnapGear image", + .offset = SZ_512K + SZ_256K, + }, + [3] = { + .name = "SnapGear StrataFlash", + }, + [4] = { + .name = "SnapGear Boot Tags", + .size = SZ_128K, + .offset = SZ_128K, + }, +}; + +static struct physmap_flash_data sg_mtd_pdata = { + .width = 1, + .nr_parts = ARRAY_SIZE(sg_mtd_partitions), + .parts = sg_mtd_partitions, +}; + + +static struct resource sg_mtd_resource[] = { + [0] = { + .start = FL_BASE, + .end = FL_BASE + FL_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device sg_mtd_device = { + .name = "physmap-flash", + .id = 0, + .num_resources = ARRAY_SIZE(sg_mtd_resource), + .resource = sg_mtd_resource, + .dev = { + .platform_data = &sg_mtd_pdata, + }, +}; + +static void __init sg_init(void) +{ + ks8695_add_device_lan(); + ks8695_add_device_wan(); + + if (machine_is_sg310()) + platform_device_register(&sg_mtd_device); +} + +#ifdef CONFIG_MACH_LITE300 +MACHINE_START(LITE300, "SecureComputing/SG300") + /* SnapGear */ + .atag_offset = 0x100, + .map_io = ks8695_map_io, + .init_irq = ks8695_init_irq, + .init_machine = sg_init, + .timer = &ks8695_timer, + .restart = ks8695_restart, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_SG310 +MACHINE_START(SG310, "McAfee/SG310") + /* SnapGear */ + .atag_offset = 0x100, + .map_io = ks8695_map_io, + .init_irq = ks8695_init_irq, + .init_machine = sg_init, + .timer = &ks8695_timer, + .restart = ks8695_restart, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_SE4200 +MACHINE_START(SE4200, "SecureComputing/SE4200") + /* SnapGear */ + .atag_offset = 0x100, + .map_io = ks8695_map_io, + .init_irq = ks8695_init_irq, + .init_machine = sg_init, + .timer = &ks8695_timer, + .restart = ks8695_restart, +MACHINE_END +#endif -- cgit v1.2.3 From a7b8575423e0aa80e8bbc388036bc7d460b43bb4 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 7 Sep 2012 15:35:39 +1000 Subject: ARM: ks8695: add board support for the OpenGear boards based on the KS8695 A number of boards produced by OpenGear and based on the Micrel KS8695 SoC. Add board support to the KS8695 kernel code to support them. The following machine type entries will need to be added back into the mach-types file with these in mainline: cm4008 MACH_CM4008 CM4008 624 cm41xx MACH_CM41XX CM41XX 672 cm4002 MACH_CM4002 CM4002 876 im42xx MACH_IM42XX IM42XX 1105 im4004 MACH_IM4004 IM4004 1400 Signed-off-by: Greg Ungerer Acked-by: Arnd Bergmann Signed-off-by: Olof Johansson --- arch/arm/mach-ks8695/Kconfig | 39 ++++++++ arch/arm/mach-ks8695/Makefile | 5 + arch/arm/mach-ks8695/board-og.c | 199 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 243 insertions(+) create mode 100644 arch/arm/mach-ks8695/board-og.c (limited to 'arch') diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig index f6b737eb79f..a545976bdbd 100644 --- a/arch/arm/mach-ks8695/Kconfig +++ b/arch/arm/mach-ks8695/Kconfig @@ -43,6 +43,45 @@ config MACH_SE4200 Internet Router. See http://www.securecomputing.com for more details. +config MACH_CM4002 + bool "OpenGear CM4002" + help + Say 'Y' here if you want your kernel to support the OpenGear + CM4002 Secure Access Server. See http://www.opengear.com for + more details. + +config MACH_CM4008 + bool "OpenGear CM4008" + select MIGHT_HAVE_PCI + help + Say 'Y' here if you want your kernel to support the OpenGear + CM4008 Console Server. See http://www.opengear.com for more + details. + +config MACH_CM41xx + bool "OpenGear CM41xx" + select MIGHT_HAVE_PCI + help + Say 'Y' here if you want your kernel to support the OpenGear + CM4016 or CM4048 Console Servers. See http://www.opengear.com for + more details. + +config MACH_IM4004 + bool "OpenGear IM4004" + select MIGHT_HAVE_PCI + help + Say 'Y' here if you want your kernel to support the OpenGear + IM4004 Secure Access Server. See http://www.opengear.com for + more details. + +config MACH_IM42xx + bool "OpenGear IM42xx" + select MIGHT_HAVE_PCI + help + Say 'Y' here if you want your kernel to support the OpenGear + IM4216 or IM4248 Console Servers. See http://www.opengear.com for + more details. + endmenu endif diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile index 9673c0ccc5d..50980e6b1c1 100644 --- a/arch/arm/mach-ks8695/Makefile +++ b/arch/arm/mach-ks8695/Makefile @@ -21,3 +21,8 @@ obj-$(CONFIG_MACH_ACS5K) += board-acs5k.o obj-$(CONFIG_MACH_LITE300) += board-sg.o obj-$(CONFIG_MACH_SG310) += board-sg.o obj-$(CONFIG_MACH_SE4200) += board-sg.o +obj-$(CONFIG_MACH_CM4002) += board-og.o +obj-$(CONFIG_MACH_CM4008) += board-og.o +obj-$(CONFIG_MACH_CM41xx) += board-og.o +obj-$(CONFIG_MACH_IM4004) += board-og.o +obj-$(CONFIG_MACH_IM42xx) += board-og.o diff --git a/arch/arm/mach-ks8695/board-og.c b/arch/arm/mach-ks8695/board-og.c new file mode 100644 index 00000000000..1623ba461e4 --- /dev/null +++ b/arch/arm/mach-ks8695/board-og.c @@ -0,0 +1,199 @@ +/* + * board-og.c -- support for the OpenGear KS8695 based boards. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "generic.h" + +static int og_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + if (machine_is_im4004() && (slot == 8)) + return KS8695_IRQ_EXTERN1; + return KS8695_IRQ_EXTERN0; +} + +static struct ks8695_pci_cfg __initdata og_pci = { + .mode = KS8695_MODE_PCI, + .map_irq = og_pci_map_irq, +}; + +static void __init og_register_pci(void) +{ + /* Initialize the GPIO lines for interrupt mode */ + ks8695_gpio_interrupt(KS8695_GPIO_0, IRQ_TYPE_LEVEL_LOW); + + /* Cardbus Slot */ + if (machine_is_im4004()) + ks8695_gpio_interrupt(KS8695_GPIO_1, IRQ_TYPE_LEVEL_LOW); + + ks8695_init_pci(&og_pci); +} + +/* + * The PCI bus reset is driven by a dedicated GPIO line. Toggle it here + * and bring the PCI bus out of reset. + */ +static void __init og_pci_bus_reset(void) +{ + unsigned int rstline = 1; + + /* Some boards use a different GPIO as the PCI reset line */ + if (machine_is_im4004()) + rstline = 2; + else if (machine_is_im42xx()) + rstline = 0; + + gpio_request(rstline, "PCI reset"); + gpio_direction_output(rstline, 0); + + /* Drive a reset on the PCI reset line */ + gpio_set_value(rstline, 1); + gpio_set_value(rstline, 0); + mdelay(100); + gpio_set_value(rstline, 1); + mdelay(100); +} + +/* + * Direct connect serial ports (non-PCI that is). + */ +#define S8250_PHYS 0x03800000 +#define S8250_VIRT 0xf4000000 +#define S8250_SIZE 0x00100000 + +static struct __initdata map_desc og_io_desc[] = { + { + .virtual = S8250_VIRT, + .pfn = __phys_to_pfn(S8250_PHYS), + .length = S8250_SIZE, + .type = MT_DEVICE, + } +}; + +static struct resource og_uart_resources[] = { + { + .start = S8250_VIRT, + .end = S8250_VIRT + S8250_SIZE, + .flags = IORESOURCE_MEM + }, +}; + +static struct plat_serial8250_port og_uart_data[] = { + { + .mapbase = S8250_VIRT, + .membase = (char *) S8250_VIRT, + .irq = 3, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = 115200 * 16, + }, + { }, +}; + +static struct platform_device og_uart = { + .name = "serial8250", + .id = 0, + .dev.platform_data = og_uart_data, + .num_resources = 1, + .resource = og_uart_resources +}; + +static struct platform_device *og_devices[] __initdata = { + &og_uart +}; + +static void __init og_init(void) +{ + ks8695_register_gpios(); + + if (machine_is_cm4002()) { + ks8695_gpio_interrupt(KS8695_GPIO_1, IRQ_TYPE_LEVEL_HIGH); + iotable_init(og_io_desc, ARRAY_SIZE(og_io_desc)); + platform_add_devices(og_devices, ARRAY_SIZE(og_devices)); + } else { + og_pci_bus_reset(); + og_register_pci(); + } + + ks8695_add_device_lan(); + ks8695_add_device_wan(); +} + +#ifdef CONFIG_MACH_CM4002 +MACHINE_START(CM4002, "OpenGear/CM4002") + /* OpenGear Inc. */ + .atag_offset = 0x100, + .map_io = ks8695_map_io, + .init_irq = ks8695_init_irq, + .init_machine = og_init, + .timer = &ks8695_timer, + .restart = ks8695_restart, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_CM4008 +MACHINE_START(CM4008, "OpenGear/CM4008") + /* OpenGear Inc. */ + .atag_offset = 0x100, + .map_io = ks8695_map_io, + .init_irq = ks8695_init_irq, + .init_machine = og_init, + .timer = &ks8695_timer, + .restart = ks8695_restart, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_CM41xx +MACHINE_START(CM41XX, "OpenGear/CM41xx") + /* OpenGear Inc. */ + .atag_offset = 0x100, + .map_io = ks8695_map_io, + .init_irq = ks8695_init_irq, + .init_machine = og_init, + .timer = &ks8695_timer, + .restart = ks8695_restart, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_IM4004 +MACHINE_START(IM4004, "OpenGear/IM4004") + /* OpenGear Inc. */ + .atag_offset = 0x100, + .map_io = ks8695_map_io, + .init_irq = ks8695_init_irq, + .init_machine = og_init, + .timer = &ks8695_timer, + .restart = ks8695_restart, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_IM42xx +MACHINE_START(IM42XX, "OpenGear/IM42xx") + /* OpenGear Inc. */ + .atag_offset = 0x100, + .map_io = ks8695_map_io, + .init_irq = ks8695_init_irq, + .init_machine = og_init, + .timer = &ks8695_timer, + .restart = ks8695_restart, +MACHINE_END +#endif -- cgit v1.2.3 From b22f6bb030ee0c98839fe2445571c57c9f89594e Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Thu, 13 Sep 2012 14:10:10 +0900 Subject: ARM: shmobile: armadillo800eva: Add support RTC The armadillo800eva has S35390A which is RTC. This is controlled using I2C of GPIO. This commit supports RTC of armadillo800eva. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Simon Horman --- arch/arm/configs/armadillo800eva_defconfig | 3 +++ arch/arm/mach-shmobile/board-armadillo800eva.c | 25 +++++++++++++++++++++++++ 2 files changed, 28 insertions(+) (limited to 'arch') diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig index 7d8718468e0..05f523d7d87 100644 --- a/arch/arm/configs/armadillo800eva_defconfig +++ b/arch/arm/configs/armadillo800eva_defconfig @@ -85,6 +85,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=8 CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y +CONFIG_I2C_GPIO=y CONFIG_I2C_SH_MOBILE=y # CONFIG_HWMON is not set CONFIG_MEDIA_SUPPORT=y @@ -120,6 +121,8 @@ CONFIG_USB_ETH=m CONFIG_MMC=y CONFIG_MMC_SDHI=y CONFIG_MMC_SH_MMCIF=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_S35390A=y CONFIG_DMADEVICES=y CONFIG_SH_DMAE=y CONFIG_UIO=y diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index cf10f92856d..81dfb88ce81 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include #include @@ -876,6 +877,21 @@ static struct platform_device fsi_hdmi_device = { }, }; +/* RTC: RTC connects i2c-gpio. */ +static struct i2c_gpio_platform_data i2c_gpio_data = { + .sda_pin = GPIO_PORT208, + .scl_pin = GPIO_PORT91, + .udelay = 5, /* 100 kHz */ +}; + +static struct platform_device i2c_gpio_device = { + .name = "i2c-gpio", + .id = 2, + .dev = { + .platform_data = &i2c_gpio_data, + }, +}; + /* I2C */ static struct i2c_board_info i2c0_devices[] = { { @@ -887,6 +903,13 @@ static struct i2c_board_info i2c0_devices[] = { }, }; +static struct i2c_board_info i2c2_devices[] = { + { + I2C_BOARD_INFO("s35390a", 0x30), + .type = "s35390a", + }, +}; + /* * board devices */ @@ -903,6 +926,7 @@ static struct platform_device *eva_devices[] __initdata = { &fsi_device, &fsi_hdmi_device, &fsi_wm8978_device, + &i2c_gpio_device, }; static void __init eva_clock_init(void) @@ -1173,6 +1197,7 @@ static void __init eva_init(void) #endif i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices)); + i2c_register_board_info(2, i2c2_devices, ARRAY_SIZE(i2c2_devices)); r8a7740_add_standard_devices(); -- cgit v1.2.3 From 4d8cc596dd9f8dcc909ad405742099239aaa48c0 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Thu, 13 Sep 2012 15:52:08 +0900 Subject: ARM: EXYNOS: Use generic pwm driver in Origen board Signed-off-by: Tushar Behera Signed-off-by: Sachin Kamat Reviewed-by: Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/Kconfig | 1 + arch/arm/mach-exynos/mach-origen.c | 6 ++++++ 2 files changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index b5b4c8c9db1..4d198d487fc 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -348,6 +348,7 @@ config MACH_ORIGEN select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY + select S3C24XX_PWM help Machine support for ORIGEN based on Samsung EXYNOS4210 diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 5ca80307d6d..2203664fb0c 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -613,6 +614,10 @@ static struct platform_device origen_lcd_hv070wsa = { .dev.platform_data = &origen_lcd_hv070wsa_data, }; +static struct pwm_lookup origen_pwm_lookup[] = { + PWM_LOOKUP("s3c24xx-pwm.0", 0, "pwm-backlight.0", NULL), +}; + #ifdef CONFIG_DRM_EXYNOS static struct exynos_drm_fimd_pdata drm_fimd_pdata = { .panel = { @@ -791,6 +796,7 @@ static void __init origen_machine_init(void) platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices)); + pwm_add_table(origen_pwm_lookup, ARRAY_SIZE(origen_pwm_lookup)); samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data); origen_bt_setup(); -- cgit v1.2.3 From 20aa198f4990c25f7542e4e94175c3cb41731c4f Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Thu, 13 Sep 2012 15:52:11 +0900 Subject: ARM: EXYNOS: Add generic PWM lookup support for SMDK4X12 Generic PWM framework requires that the board setup code register a static mapping that can be used to match PWM consumers to providers. Signed-off-by: Sachin Kamat Reviewed-by: Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/Kconfig | 1 + arch/arm/mach-exynos/mach-smdk4x12.c | 6 ++++++ 2 files changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 4d198d487fc..bd78d5d70c8 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -384,6 +384,7 @@ config MACH_SMDK4212 select EXYNOS4_SETUP_KEYPAD select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY + select S3C24XX_PWM help Machine support for Samsung SMDK4212 diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c index b26beb13ebe..81bf59c6f4b 100644 --- a/arch/arm/mach-exynos/mach-smdk4x12.c +++ b/arch/arm/mach-exynos/mach-smdk4x12.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -222,6 +223,10 @@ static struct platform_pwm_backlight_data smdk4x12_bl_data = { .pwm_period_ns = 1000, }; +static struct pwm_lookup smdk4x12_pwm_lookup[] = { + PWM_LOOKUP("s3c24xx-pwm.1", 0, "pwm-backlight.0", NULL), +}; + static uint32_t smdk4x12_keymap[] __initdata = { /* KEY(row, col, keycode) */ KEY(1, 3, KEY_1), KEY(1, 4, KEY_2), KEY(1, 5, KEY_3), @@ -349,6 +354,7 @@ static void __init smdk4x12_machine_init(void) ARRAY_SIZE(smdk4x12_i2c_devs7)); samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data); + pwm_add_table(smdk4x12_pwm_lookup, ARRAY_SIZE(smdk4x12_pwm_lookup)); samsung_keypad_set_platdata(&smdk4x12_keypad_data); -- cgit v1.2.3 From fae9659a2cabcdaa01ea5a87568677e5cb037478 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Thu, 13 Sep 2012 15:54:18 +0900 Subject: ARM: EXYNOS: Add generic PWM lookup support for SMDKV310 Generic PWM framework requires that the board setup code register a static mapping that can be used to match PWM consumers to providers. Signed-off-by: Sachin Kamat Reviewed-by: Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/Kconfig | 1 + arch/arm/mach-exynos/mach-smdkv310.c | 7 +++++++ 2 files changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index bd78d5d70c8..7ec64c8c991 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -221,6 +221,7 @@ config MACH_SMDKV310 select EXYNOS4_SETUP_KEYPAD select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY + select S3C24XX_PWM help Machine support for Samsung SMDKV310 diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 3cfa688d274..1ba87e963f5 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -354,6 +355,10 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = { .pwm_period_ns = 1000, }; +static struct pwm_lookup smdkv310_pwm_lookup[] = { + PWM_LOOKUP("s3c24xx-pwm.1", 0, "pwm-backlight.0", NULL), +}; + static void s5p_tv_setup(void) { /* direct HPD to HDMI chip */ @@ -392,6 +397,8 @@ static void __init smdkv310_machine_init(void) samsung_keypad_set_platdata(&smdkv310_keypad_data); samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data); + pwm_add_table(smdkv310_pwm_lookup, ARRAY_SIZE(smdkv310_pwm_lookup)); + #ifdef CONFIG_DRM_EXYNOS s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; exynos4_fimd0_gpio_setup_24bpp(); -- cgit v1.2.3 From cb03af01c612ba97621a927225791a98357959c1 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 10 Sep 2012 10:33:08 -0700 Subject: ARM: msm: Allow msm_iomap-8x60 and msm_iomap-8960 to coexist Remove the unused GCC, ACC, and shared memory definitions in the 8660 static mappings. This allows the 8660 header file to be included in msm_iomap.h unconditionally. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/include/mach/msm_iomap-8x60.h | 11 ----------- arch/arm/mach-msm/include/mach/msm_iomap.h | 3 +-- arch/arm/mach-msm/io.c | 2 -- 3 files changed, 1 insertion(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h index 5aed57dc808..b51ba8a927b 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h @@ -41,21 +41,10 @@ #define MSM8X60_QGIC_CPU_PHYS 0x02081000 #define MSM8X60_QGIC_CPU_SIZE SZ_4K -#define MSM_ACC_BASE IOMEM(0xF0002000) -#define MSM_ACC_PHYS 0x02001000 -#define MSM_ACC_SIZE SZ_4K - -#define MSM_GCC_BASE IOMEM(0xF0003000) -#define MSM_GCC_PHYS 0x02082000 -#define MSM_GCC_SIZE SZ_4K - #define MSM_TLMM_BASE IOMEM(0xF0004000) #define MSM_TLMM_PHYS 0x00800000 #define MSM_TLMM_SIZE SZ_16K -#define MSM_SHARED_RAM_BASE IOMEM(0xF0100000) -#define MSM_SHARED_RAM_SIZE SZ_1M - #define MSM8X60_TMR_PHYS 0x02000000 #define MSM8X60_TMR_SIZE SZ_4K diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h index 00afdfb8c38..2ab7cf0919b 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap.h @@ -41,12 +41,11 @@ #include "msm_iomap-7x30.h" #elif defined(CONFIG_ARCH_QSD8X50) #include "msm_iomap-8x50.h" -#elif defined(CONFIG_ARCH_MSM8X60) -#include "msm_iomap-8x60.h" #else #include "msm_iomap-7x00.h" #endif +#include "msm_iomap-8x60.h" #include "msm_iomap-8960.h" #define MSM_DEBUG_UART_SIZE SZ_4K diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index a1e7b116885..b0016a00ddf 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -109,8 +109,6 @@ static struct map_desc msm8x60_io_desc[] __initdata = { MSM_CHIP_DEVICE(QGIC_CPU, MSM8X60), MSM_CHIP_DEVICE(TMR, MSM8X60), MSM_CHIP_DEVICE(TMR0, MSM8X60), - MSM_DEVICE(ACC), - MSM_DEVICE(GCC), #ifdef CONFIG_DEBUG_MSM8660_UART MSM_DEVICE(DEBUG_UART), #endif -- cgit v1.2.3 From 33fcb13dc543af610c7c930dbfeeed6e6ed02376 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 10 Sep 2012 10:33:09 -0700 Subject: ARM: msm: Allow 8960 and 8660 to compile together Modify the Kconfig to allow the MSM 8660 and MSM 8960 targets to compile together in the same build. As long as one of these two targets is selected the choice menu used to select which SoC to support will be hidden. Deselecting both of these targets will reintroduce the choice menu, and allow users to select targets that must be compiled in isolation. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/Kconfig | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 1cd40ad301d..03c549369ce 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -1,8 +1,12 @@ if ARCH_MSM +comment "Qualcomm MSM SoC Type" + depends on (ARCH_MSM8X60 || ARCH_MSM8960) + choice prompt "Qualcomm MSM SoC Type" default ARCH_MSM7X00A + depends on !(ARCH_MSM8X60 || ARCH_MSM8960) config ARCH_MSM7X00A bool "MSM7x00A / MSM7x01A" @@ -36,6 +40,8 @@ config ARCH_QSD8X50 select GPIO_MSM_V1 select MSM_PROC_COMM +endchoice + config ARCH_MSM8X60 bool "MSM8X60" select MACH_MSM8X60_SURF if (!MACH_MSM8X60_RUMI3 && !MACH_MSM8X60_SIM \ @@ -58,8 +64,6 @@ config ARCH_MSM8960 select MSM_GPIOMUX select MSM_SCM if SMP -endchoice - config MSM_HAS_DEBUG_UART_HS bool -- cgit v1.2.3