From 3f7e5815f4b774270e6506962de37af85aa9c830 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 18 Sep 2006 23:10:26 +0100 Subject: [ARM] 3817/1: iop3xx: split the iop3xx mach into iop32x and iop33x Split the iop3xx mach type into iop32x and iop33x -- split the config symbols, and move the code in the mach-iop3xx directory to the mach-iop32x and mach-iop33x directories. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/Kconfig | 20 +++- arch/arm/Makefile | 3 +- arch/arm/configs/ep80219_defconfig | 5 +- arch/arm/configs/iq31244_defconfig | 5 +- arch/arm/configs/iq80321_defconfig | 5 +- arch/arm/configs/iq80331_defconfig | 4 +- arch/arm/configs/iq80332_defconfig | 4 +- arch/arm/mach-iop32x/Kconfig | 28 +++++ arch/arm/mach-iop32x/Makefile | 11 ++ arch/arm/mach-iop32x/Makefile.boot | 3 + arch/arm/mach-iop32x/common.c | 72 ++++++++++++ arch/arm/mach-iop32x/iq31244-mm.c | 45 ++++++++ arch/arm/mach-iop32x/iq31244-pci.c | 129 +++++++++++++++++++++ arch/arm/mach-iop32x/iq80321-mm.c | 45 ++++++++ arch/arm/mach-iop32x/iq80321-pci.c | 123 ++++++++++++++++++++ arch/arm/mach-iop32x/irq.c | 97 ++++++++++++++++ arch/arm/mach-iop32x/pci.c | 220 +++++++++++++++++++++++++++++++++++ arch/arm/mach-iop32x/setup.c | 173 ++++++++++++++++++++++++++++ arch/arm/mach-iop32x/time.c | 108 ++++++++++++++++++ arch/arm/mach-iop33x/Kconfig | 27 +++++ arch/arm/mach-iop33x/Makefile | 11 ++ arch/arm/mach-iop33x/Makefile.boot | 3 + arch/arm/mach-iop33x/common.c | 22 ++++ arch/arm/mach-iop33x/iq80331-mm.c | 35 ++++++ arch/arm/mach-iop33x/iq80331-pci.c | 119 +++++++++++++++++++ arch/arm/mach-iop33x/iq80332-mm.c | 35 ++++++ arch/arm/mach-iop33x/iq80332-pci.c | 125 ++++++++++++++++++++ arch/arm/mach-iop33x/irq.c | 129 +++++++++++++++++++++ arch/arm/mach-iop33x/pci.c | 222 ++++++++++++++++++++++++++++++++++++ arch/arm/mach-iop33x/setup.c | 221 +++++++++++++++++++++++++++++++++++ arch/arm/mach-iop33x/time.c | 106 +++++++++++++++++ arch/arm/mach-iop3xx/Kconfig | 66 ----------- arch/arm/mach-iop3xx/Makefile | 23 ---- arch/arm/mach-iop3xx/Makefile.boot | 9 -- arch/arm/mach-iop3xx/common.c | 72 ------------ arch/arm/mach-iop3xx/iop321-irq.c | 97 ---------------- arch/arm/mach-iop3xx/iop321-pci.c | 220 ----------------------------------- arch/arm/mach-iop3xx/iop321-setup.c | 173 ---------------------------- arch/arm/mach-iop3xx/iop321-time.c | 108 ------------------ arch/arm/mach-iop3xx/iop331-irq.c | 129 --------------------- arch/arm/mach-iop3xx/iop331-pci.c | 222 ------------------------------------ arch/arm/mach-iop3xx/iop331-setup.c | 221 ----------------------------------- arch/arm/mach-iop3xx/iop331-time.c | 106 ----------------- arch/arm/mach-iop3xx/iq31244-mm.c | 45 -------- arch/arm/mach-iop3xx/iq31244-pci.c | 129 --------------------- arch/arm/mach-iop3xx/iq80321-mm.c | 45 -------- arch/arm/mach-iop3xx/iq80321-pci.c | 123 -------------------- arch/arm/mach-iop3xx/iq80331-mm.c | 35 ------ arch/arm/mach-iop3xx/iq80331-pci.c | 119 ------------------- arch/arm/mach-iop3xx/iq80332-mm.c | 35 ------ arch/arm/mach-iop3xx/iq80332-pci.c | 125 -------------------- arch/arm/mm/Kconfig | 2 +- 52 files changed, 2137 insertions(+), 2122 deletions(-) create mode 100644 arch/arm/mach-iop32x/Kconfig create mode 100644 arch/arm/mach-iop32x/Makefile create mode 100644 arch/arm/mach-iop32x/Makefile.boot create mode 100644 arch/arm/mach-iop32x/common.c create mode 100644 arch/arm/mach-iop32x/iq31244-mm.c create mode 100644 arch/arm/mach-iop32x/iq31244-pci.c create mode 100644 arch/arm/mach-iop32x/iq80321-mm.c create mode 100644 arch/arm/mach-iop32x/iq80321-pci.c create mode 100644 arch/arm/mach-iop32x/irq.c create mode 100644 arch/arm/mach-iop32x/pci.c create mode 100644 arch/arm/mach-iop32x/setup.c create mode 100644 arch/arm/mach-iop32x/time.c create mode 100644 arch/arm/mach-iop33x/Kconfig create mode 100644 arch/arm/mach-iop33x/Makefile create mode 100644 arch/arm/mach-iop33x/Makefile.boot create mode 100644 arch/arm/mach-iop33x/common.c create mode 100644 arch/arm/mach-iop33x/iq80331-mm.c create mode 100644 arch/arm/mach-iop33x/iq80331-pci.c create mode 100644 arch/arm/mach-iop33x/iq80332-mm.c create mode 100644 arch/arm/mach-iop33x/iq80332-pci.c create mode 100644 arch/arm/mach-iop33x/irq.c create mode 100644 arch/arm/mach-iop33x/pci.c create mode 100644 arch/arm/mach-iop33x/setup.c create mode 100644 arch/arm/mach-iop33x/time.c delete mode 100644 arch/arm/mach-iop3xx/Kconfig delete mode 100644 arch/arm/mach-iop3xx/Makefile delete mode 100644 arch/arm/mach-iop3xx/Makefile.boot delete mode 100644 arch/arm/mach-iop3xx/common.c delete mode 100644 arch/arm/mach-iop3xx/iop321-irq.c delete mode 100644 arch/arm/mach-iop3xx/iop321-pci.c delete mode 100644 arch/arm/mach-iop3xx/iop321-setup.c delete mode 100644 arch/arm/mach-iop3xx/iop321-time.c delete mode 100644 arch/arm/mach-iop3xx/iop331-irq.c delete mode 100644 arch/arm/mach-iop3xx/iop331-pci.c delete mode 100644 arch/arm/mach-iop3xx/iop331-setup.c delete mode 100644 arch/arm/mach-iop3xx/iop331-time.c delete mode 100644 arch/arm/mach-iop3xx/iq31244-mm.c delete mode 100644 arch/arm/mach-iop3xx/iq31244-pci.c delete mode 100644 arch/arm/mach-iop3xx/iq80321-mm.c delete mode 100644 arch/arm/mach-iop3xx/iq80321-pci.c delete mode 100644 arch/arm/mach-iop3xx/iq80331-mm.c delete mode 100644 arch/arm/mach-iop3xx/iq80331-pci.c delete mode 100644 arch/arm/mach-iop3xx/iq80332-mm.c delete mode 100644 arch/arm/mach-iop3xx/iq80332-pci.c (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d9376f048ed..0fb17bbb86b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -202,12 +202,20 @@ config ARCH_IMX help Support for Motorola's i.MX family of processors (MX1, MXL). -config ARCH_IOP3XX - bool "IOP3xx-based" +config ARCH_IOP32X + bool "IOP32x-based" depends on MMU select PCI help - Support for Intel's IOP3XX (XScale) family of processors. + Support for Intel's 80219 and IOP32X (XScale) family of + processors. + +config ARCH_IOP33X + bool "IOP33x-based" + depends on MMU + select PCI + help + Support for Intel's IOP33X (XScale) family of processors. config ARCH_IXP4XX bool "IXP4xx-based" @@ -312,7 +320,9 @@ source "arch/arm/mach-footbridge/Kconfig" source "arch/arm/mach-integrator/Kconfig" -source "arch/arm/mach-iop3xx/Kconfig" +source "arch/arm/mach-iop32x/Kconfig" + +source "arch/arm/mach-iop33x/Kconfig" source "arch/arm/mach-ixp4xx/Kconfig" @@ -848,7 +858,7 @@ source "drivers/block/Kconfig" source "drivers/acorn/block/Kconfig" -if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \ +if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \ || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \ || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \ || ARCH_IXP23XX diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 92873cdee31..ac786bf0f54 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -101,7 +101,8 @@ endif machine-$(CONFIG_ARCH_INTEGRATOR) := integrator textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000 machine-$(CONFIG_ARCH_CLPS711X) := clps711x - machine-$(CONFIG_ARCH_IOP3XX) := iop3xx + machine-$(CONFIG_ARCH_IOP32X) := iop32x + machine-$(CONFIG_ARCH_IOP33X) := iop33x machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx machine-$(CONFIG_ARCH_IXP2000) := ixp2000 machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx diff --git a/arch/arm/configs/ep80219_defconfig b/arch/arm/configs/ep80219_defconfig index 199f1567345..f91cf8ff359 100644 --- a/arch/arm/configs/ep80219_defconfig +++ b/arch/arm/configs/ep80219_defconfig @@ -66,7 +66,8 @@ CONFIG_KMOD=y # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set -CONFIG_ARCH_IOP3XX=y +CONFIG_ARCH_IOP32X=y +# CONFIG_ARCH_IOP33X is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_L7200 is not set @@ -93,8 +94,6 @@ CONFIG_ARCH_IQ31244=y # CONFIG_ARCH_IQ80331 is not set # CONFIG_MACH_IQ80332 is not set CONFIG_ARCH_EP80219=y -CONFIG_ARCH_IOP32X=y -# CONFIG_ARCH_IOP33X is not set # # IOP3xx Chipset Features diff --git a/arch/arm/configs/iq31244_defconfig b/arch/arm/configs/iq31244_defconfig index 27f884417b9..ce1b1f20b76 100644 --- a/arch/arm/configs/iq31244_defconfig +++ b/arch/arm/configs/iq31244_defconfig @@ -67,7 +67,8 @@ CONFIG_KMOD=y # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set -CONFIG_ARCH_IOP3XX=y +CONFIG_ARCH_IOP32X=y +# CONFIG_ARCH_IOP33X is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_L7200 is not set @@ -94,8 +95,6 @@ CONFIG_ARCH_IQ31244=y # CONFIG_ARCH_IQ80331 is not set # CONFIG_MACH_IQ80332 is not set # CONFIG_ARCH_EP80219 is not set -CONFIG_ARCH_IOP32X=y -# CONFIG_ARCH_IOP33X is not set # # IOP3xx Chipset Features diff --git a/arch/arm/configs/iq80321_defconfig b/arch/arm/configs/iq80321_defconfig index 33f21a24cf4..f00b0d2159d 100644 --- a/arch/arm/configs/iq80321_defconfig +++ b/arch/arm/configs/iq80321_defconfig @@ -66,7 +66,8 @@ CONFIG_KMOD=y # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set -CONFIG_ARCH_IOP3XX=y +CONFIG_ARCH_IOP32X=y +# CONFIG_ARCH_IOP33X is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_L7200 is not set @@ -93,8 +94,6 @@ CONFIG_ARCH_IQ80321=y # CONFIG_ARCH_IQ80331 is not set # CONFIG_MACH_IQ80332 is not set # CONFIG_ARCH_EP80219 is not set -CONFIG_ARCH_IOP32X=y -# CONFIG_ARCH_IOP33X is not set # # IOP3xx Chipset Features diff --git a/arch/arm/configs/iq80331_defconfig b/arch/arm/configs/iq80331_defconfig index 67a8bd7dba2..af3a87e469d 100644 --- a/arch/arm/configs/iq80331_defconfig +++ b/arch/arm/configs/iq80331_defconfig @@ -66,7 +66,8 @@ CONFIG_KMOD=y # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set -CONFIG_ARCH_IOP3XX=y +# CONFIG_ARCH_IOP32X is not set +CONFIG_ARCH_IOP33X=y # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_L7200 is not set @@ -93,7 +94,6 @@ CONFIG_ARCH_IOP3XX=y CONFIG_ARCH_IQ80331=y # CONFIG_MACH_IQ80332 is not set # CONFIG_ARCH_EP80219 is not set -CONFIG_ARCH_IOP33X=y # # IOP3xx Chipset Features diff --git a/arch/arm/configs/iq80332_defconfig b/arch/arm/configs/iq80332_defconfig index c8dea45cb01..931c78755a3 100644 --- a/arch/arm/configs/iq80332_defconfig +++ b/arch/arm/configs/iq80332_defconfig @@ -66,7 +66,8 @@ CONFIG_KMOD=y # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set -CONFIG_ARCH_IOP3XX=y +# CONFIG_ARCH_IOP32X is not set +CONFIG_ARCH_IOP33X=y # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_L7200 is not set @@ -93,7 +94,6 @@ CONFIG_ARCH_IOP3XX=y # CONFIG_ARCH_IQ80331 is not set CONFIG_MACH_IQ80332=y # CONFIG_ARCH_EP80219 is not set -CONFIG_ARCH_IOP33X=y # # IOP3xx Chipset Features diff --git a/arch/arm/mach-iop32x/Kconfig b/arch/arm/mach-iop32x/Kconfig new file mode 100644 index 00000000000..21e3e8c8c2a --- /dev/null +++ b/arch/arm/mach-iop32x/Kconfig @@ -0,0 +1,28 @@ +if ARCH_IOP32X + +menu "IOP32x Implementation Options" + +comment "IOP32x Platform Types" + +config ARCH_IQ80321 + bool "Enable support for IQ80321" + help + Say Y here if you want to run your kernel on the Intel IQ80321 + evaluation kit for the IOP321 chipset. + +config ARCH_IQ31244 + bool "Enable support for IQ31244" + help + Say Y here if you want to run your kernel on the Intel IQ31244 + evaluation kit for the IOP321 chipset. + +config ARCH_EP80219 + bool "Enable support for EP80219" + select ARCH_IQ31244 + help + Say Y here if you want to run your kernel on the Intel EP80219 + evaluation kit for the Intel 80219 chipset (a IOP321 variant). + +endmenu + +endif diff --git a/arch/arm/mach-iop32x/Makefile b/arch/arm/mach-iop32x/Makefile new file mode 100644 index 00000000000..94144f7efa6 --- /dev/null +++ b/arch/arm/mach-iop32x/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for the linux kernel. +# + +obj-y := common.o setup.o irq.o pci.o time.o +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_ARCH_IQ80321) += iq80321-mm.o iq80321-pci.o +obj-$(CONFIG_ARCH_IQ31244) += iq31244-mm.o iq31244-pci.o diff --git a/arch/arm/mach-iop32x/Makefile.boot b/arch/arm/mach-iop32x/Makefile.boot new file mode 100644 index 00000000000..47000dccd61 --- /dev/null +++ b/arch/arm/mach-iop32x/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0xa0008000 +params_phys-y := 0xa0000100 +initrd_phys-y := 0xa0800000 diff --git a/arch/arm/mach-iop32x/common.c b/arch/arm/mach-iop32x/common.c new file mode 100644 index 00000000000..8044af6a54e --- /dev/null +++ b/arch/arm/mach-iop32x/common.c @@ -0,0 +1,72 @@ +/* + * arch/arm/mach-iop32x/common.c + * + * Common routines shared across all IOP3xx implementations + * + * Author: Deepak Saxena + * + * Copyright 2003 (c) MontaVista, Software, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include + +/* + * Shared variables + */ +unsigned long iop3xx_pcibios_min_io = 0; +unsigned long iop3xx_pcibios_min_mem = 0; + +#ifdef CONFIG_ARCH_EP80219 +#include +/* + * Default power-off for EP80219 + */ + +static inline void ep80219_send_to_pic(__u8 c) { +} + +void ep80219_power_off(void) +{ + /* + * This function will send a SHUTDOWN_COMPLETE message to the PIC controller + * over I2C. We are not using the i2c subsystem since we are going to power + * off and it may be removed + */ + + /* Send the Address byte w/ the start condition */ + *IOP321_IDBR1 = 0x60; + *IOP321_ICR1 = 0xE9; + mdelay(1); + + /* Send the START_MSG byte w/ no start or stop condition */ + *IOP321_IDBR1 = 0x0F; + *IOP321_ICR1 = 0xE8; + mdelay(1); + + /* Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or stop condition */ + *IOP321_IDBR1 = 0x03; + *IOP321_ICR1 = 0xE8; + mdelay(1); + + /* Send an ignored byte w/ stop condition */ + *IOP321_IDBR1 = 0x00; + *IOP321_ICR1 = 0xEA; + + while (1) ; +} + +#include +#include + +static int __init ep80219_init(void) +{ + pm_power_off = ep80219_power_off; + return 0; +} +arch_initcall(ep80219_init); +#endif diff --git a/arch/arm/mach-iop32x/iq31244-mm.c b/arch/arm/mach-iop32x/iq31244-mm.c new file mode 100644 index 00000000000..ffc6692c95a --- /dev/null +++ b/arch/arm/mach-iop32x/iq31244-mm.c @@ -0,0 +1,45 @@ +/* + * linux/arch/arm/mach-iop32x/iq31244-mm.c + * + * Low level memory initialization for iq80321 platform + * + * Author: Rory Bolt + * Copyright (C) 2002 Rory Bolt + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include + +#include +#include +#include + +#include + + +/* + * IQ80321 specific IO mappings + * + * We use RedBoot's setup for the onboard devices. + */ +static struct map_desc iq31244_io_desc[] __initdata = { + { /* on-board devices */ + .virtual = IQ31244_UART, + .pfn = __phys_to_pfn(IQ31244_UART), + .length = 0x00100000, + .type = MT_DEVICE + } +}; + +void __init iq31244_map_io(void) +{ + iop321_map_io(); + + iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc)); +} diff --git a/arch/arm/mach-iop32x/iq31244-pci.c b/arch/arm/mach-iop32x/iq31244-pci.c new file mode 100644 index 00000000000..e447c8103ec --- /dev/null +++ b/arch/arm/mach-iop32x/iq31244-pci.c @@ -0,0 +1,129 @@ +/* + * arch/arm/mach-iop32x/iq31244-pci.c + * + * PCI support for the Intel IQ31244 reference board + * + * Author: Rory Bolt + * Copyright (C) 2002 Rory Bolt + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* + * The following macro is used to lookup irqs in a standard table + * format for those systems that do not already have PCI + * interrupts properly routed. We assume 1 <= pin <= 4 + */ +#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \ +({ int _ctl_ = -1; \ + unsigned int _idsel = idsel - minid; \ + if (_idsel <= maxid) \ + _ctl_ = pci_irq_table[_idsel][pin-1]; \ + _ctl_; }) + +#define INTA IRQ_IQ31244_INTA +#define INTB IRQ_IQ31244_INTB +#define INTC IRQ_IQ31244_INTC +#define INTD IRQ_IQ31244_INTD + +#define INTE IRQ_IQ31244_I82546 + +static inline int __init +iq31244_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) +{ + static int pci_irq_table[][4] = { + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ +#ifdef CONFIG_ARCH_EP80219 + {INTB, INTB, INTB, INTB}, /* CFlash */ + {INTE, INTE, INTE, INTE}, /* 82551 Pro 100 */ + {INTD, INTD, INTD, INTD}, /* PCI-X Slot */ + {INTC, INTC, INTC, INTC}, /* SATA */ +#else + {INTB, INTB, INTB, INTB}, /* CFlash */ + {INTC, INTC, INTC, INTC}, /* SATA */ + {INTD, INTD, INTD, INTD}, /* PCI-X Slot */ + {INTE, INTE, INTE, INTE}, /* 82546 GigE */ +#endif // CONFIG_ARCH_EP80219 + }; + + BUG_ON(pin < 1 || pin > 4); + + return PCI_IRQ_TABLE_LOOKUP(0, 7); +} + +static int iq31244_setup(int nr, struct pci_sys_data *sys) +{ + struct resource *res; + + if(nr != 0) + return 0; + + res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); + if (!res) + panic("PCI: unable to alloc resources"); + + res[0].start = IOP321_PCI_LOWER_IO_VA; + res[0].end = IOP321_PCI_UPPER_IO_VA; + res[0].name = "IQ31244 PCI I/O Space"; + res[0].flags = IORESOURCE_IO; + + res[1].start = IOP321_PCI_LOWER_MEM_PA; + res[1].end = IOP321_PCI_UPPER_MEM_PA; + res[1].name = "IQ31244 PCI Memory Space"; + res[1].flags = IORESOURCE_MEM; + + request_resource(&ioport_resource, &res[0]); + request_resource(&iomem_resource, &res[1]); + + sys->mem_offset = IOP321_PCI_MEM_OFFSET; + sys->io_offset = IOP321_PCI_IO_OFFSET; + + sys->resource[0] = &res[0]; + sys->resource[1] = &res[1]; + sys->resource[2] = NULL; + + return 1; +} + +static void iq31244_preinit(void) +{ + iop321_init(); +} + +static struct hw_pci iq31244_pci __initdata = { + .swizzle = pci_std_swizzle, + .nr_controllers = 1, + .setup = iq31244_setup, + .scan = iop321_scan_bus, + .preinit = iq31244_preinit, + .map_irq = iq31244_map_irq +}; + +static int __init iq31244_pci_init(void) +{ + if (machine_is_iq31244()) + pci_common_init(&iq31244_pci); + return 0; +} + +subsys_initcall(iq31244_pci_init); + + + + diff --git a/arch/arm/mach-iop32x/iq80321-mm.c b/arch/arm/mach-iop32x/iq80321-mm.c new file mode 100644 index 00000000000..5f702a7ff62 --- /dev/null +++ b/arch/arm/mach-iop32x/iq80321-mm.c @@ -0,0 +1,45 @@ +/* + * linux/arch/arm/mach-iop32x/iq80321-mm.c + * + * Low level memory initialization for iq80321 platform + * + * Author: Rory Bolt + * Copyright (C) 2002 Rory Bolt + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include + +#include +#include +#include + +#include + + +/* + * IQ80321 specific IO mappings + * + * We use RedBoot's setup for the onboard devices. + */ +static struct map_desc iq80321_io_desc[] __initdata = { + { /* on-board devices */ + .virtual = IQ80321_UART, + .pfn = __phys_to_pfn(IQ80321_UART), + .length = 0x00100000, + .type = MT_DEVICE + } +}; + +void __init iq80321_map_io(void) +{ + iop321_map_io(); + + iotable_init(iq80321_io_desc, ARRAY_SIZE(iq80321_io_desc)); +} diff --git a/arch/arm/mach-iop32x/iq80321-pci.c b/arch/arm/mach-iop32x/iq80321-pci.c new file mode 100644 index 00000000000..8767950e131 --- /dev/null +++ b/arch/arm/mach-iop32x/iq80321-pci.c @@ -0,0 +1,123 @@ +/* + * arch/arm/mach-iop32x/iq80321-pci.c + * + * PCI support for the Intel IQ80321 reference board + * + * Author: Rory Bolt + * Copyright (C) 2002 Rory Bolt + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* + * The following macro is used to lookup irqs in a standard table + * format for those systems that do not already have PCI + * interrupts properly routed. We assume 1 <= pin <= 4 + */ +#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \ +({ int _ctl_ = -1; \ + unsigned int _idsel = idsel - minid; \ + if (_idsel <= maxid) \ + _ctl_ = pci_irq_table[_idsel][pin-1]; \ + _ctl_; }) + +#define INTA IRQ_IQ80321_INTA +#define INTB IRQ_IQ80321_INTB +#define INTC IRQ_IQ80321_INTC +#define INTD IRQ_IQ80321_INTD + +#define INTE IRQ_IQ80321_I82544 + +static inline int __init +iq80321_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) +{ + static int pci_irq_table[][4] = { + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + {INTE, INTE, INTE, INTE}, /* Gig-E */ + {-1, -1, -1, -1}, /* Unused */ + {INTC, INTD, INTA, INTB}, /* PCI-X Slot */ + {-1, -1, -1, -1}, + }; + + BUG_ON(pin < 1 || pin > 4); + +// return PCI_IRQ_TABLE_LOOKUP(4, 7); + return pci_irq_table[idsel%4][pin-1]; +} + +static int iq80321_setup(int nr, struct pci_sys_data *sys) +{ + struct resource *res; + + if(nr != 0) + return 0; + + res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); + if (!res) + panic("PCI: unable to alloc resources"); + + res[0].start = IOP321_PCI_LOWER_IO_VA; + res[0].end = IOP321_PCI_UPPER_IO_VA; + res[0].name = "IQ80321 PCI I/O Space"; + res[0].flags = IORESOURCE_IO; + + res[1].start = IOP321_PCI_LOWER_MEM_PA; + res[1].end = IOP321_PCI_UPPER_MEM_PA; + res[1].name = "IQ80321 PCI Memory Space"; + res[1].flags = IORESOURCE_MEM; + + request_resource(&ioport_resource, &res[0]); + request_resource(&iomem_resource, &res[1]); + + sys->mem_offset = IOP321_PCI_MEM_OFFSET; + sys->io_offset = IOP321_PCI_IO_OFFSET; + + sys->resource[0] = &res[0]; + sys->resource[1] = &res[1]; + sys->resource[2] = NULL; + + return 1; +} + +static void iq80321_preinit(void) +{ + iop321_init(); +} + +static struct hw_pci iq80321_pci __initdata = { + .swizzle = pci_std_swizzle, + .nr_controllers = 1, + .setup = iq80321_setup, + .scan = iop321_scan_bus, + .preinit = iq80321_preinit, + .map_irq = iq80321_map_irq +}; + +static int __init iq80321_pci_init(void) +{ + if (machine_is_iq80321()) + pci_common_init(&iq80321_pci); + return 0; +} + +subsys_initcall(iq80321_pci_init); + + + + diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c new file mode 100644 index 00000000000..c5f633d2d63 --- /dev/null +++ b/arch/arm/mach-iop32x/irq.c @@ -0,0 +1,97 @@ +/* + * linux/arch/arm/mach-iop32x/irq.c + * + * Generic IOP32X IRQ handling functionality + * + * Author: Rory Bolt + * Copyright (C) 2002 Rory Bolt + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Added IOP3XX chipset and IQ80321 board masking code. + * + */ +#include +#include +#include + +#include +#include +#include + +#include + +static u32 iop321_mask /* = 0 */; + +static inline void intctl_write(u32 val) +{ + asm volatile("mcr p6,0,%0,c0,c0,0"::"r" (val)); +} + +static inline void intstr_write(u32 val) +{ + asm volatile("mcr p6,0,%0,c4,c0,0"::"r" (val)); +} + +static void +iop321_irq_mask (unsigned int irq) +{ + + iop321_mask &= ~(1 << (irq - IOP321_IRQ_OFS)); + + intctl_write(iop321_mask); +} + +static void +iop321_irq_unmask (unsigned int irq) +{ + iop321_mask |= (1 << (irq - IOP321_IRQ_OFS)); + + intctl_write(iop321_mask); +} + +struct irq_chip ext_chip = { + .name = "IOP", + .ack = iop321_irq_mask, + .mask = iop321_irq_mask, + .unmask = iop321_irq_unmask, +}; + +void __init iop321_init_irq(void) +{ + unsigned int i, tmp; + + /* Enable access to coprocessor 6 for dealing with IRQs. + * From RMK: + * Basically, the Intel documentation here is poor. It appears that + * you need to set the bit to be able to access the coprocessor from + * SVC mode. Whether that allows access from user space or not is + * unclear. + */ + asm volatile ( + "mrc p15, 0, %0, c15, c1, 0\n\t" + "orr %0, %0, %1\n\t" + "mcr p15, 0, %0, c15, c1, 0\n\t" + /* The action is delayed, so we have to do this: */ + "mrc p15, 0, %0, c15, c1, 0\n\t" + "mov %0, %0\n\t" + "sub pc, pc, #4" + : "=r" (tmp) : "i" (1 << 6) ); + + intctl_write(0); // disable all interrupts + intstr_write(0); // treat all as IRQ + if(machine_is_iq80321() || + machine_is_iq31244()) // all interrupts are inputs to chip + *IOP321_PCIIRSR = 0x0f; + + for(i = IOP321_IRQ_OFS; i < NR_IRQS; i++) + { + set_irq_chip(i, &ext_chip); + set_irq_handler(i, do_level_IRQ); + set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + + } +} + diff --git a/arch/arm/mach-iop32x/pci.c b/arch/arm/mach-iop32x/pci.c new file mode 100644 index 00000000000..1a7c683673f --- /dev/null +++ b/arch/arm/mach-iop32x/pci.c @@ -0,0 +1,220 @@ +/* + * arch/arm/mach-iop32x/pci.c + * + * PCI support for the Intel IOP321 chipset + * + * Author: Rory Bolt + * Copyright (C) 2002 Rory Bolt + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include + +// #define DEBUG + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) do { } while (0) +#endif + +/* + * This routine builds either a type0 or type1 configuration command. If the + * bus is on the 80321 then a type0 made, else a type1 is created. + */ +static u32 iop321_cfg_address(struct pci_bus *bus, int devfn, int where) +{ + struct pci_sys_data *sys = bus->sysdata; + u32 addr; + + if (sys->busnr == bus->number) + addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11); + else + addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1; + + addr |= PCI_FUNC(devfn) << 8 | (where & ~3); + + return addr; +} + +/* + * This routine checks the status of the last configuration cycle. If an error + * was detected it returns a 1, else it returns a 0. The errors being checked + * are parity, master abort, target abort (master and target). These types of + * errors occure during a config cycle where there is no device, like during + * the discovery stage. + */ +static int iop321_pci_status(void) +{ + unsigned int status; + int ret = 0; + + /* + * Check the status registers. + */ + status = *IOP321_ATUSR; + if (status & 0xf900) + { + DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status); + *IOP321_ATUSR = status & 0xf900; + ret = 1; + } + status = *IOP321_ATUISR; + if (status & 0x679f) + { + DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status); + *IOP321_ATUISR = status & 0x679f; + ret = 1; + } + return ret; +} + +/* + * Simply write the address register and read the configuration + * data. Note that the 4 nop's ensure that we are able to handle + * a delayed abort (in theory.) + */ +static inline u32 iop321_read(unsigned long addr) +{ + u32 val; + + __asm__ __volatile__( + "str %1, [%2]\n\t" + "ldr %0, [%3]\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + : "=r" (val) + : "r" (addr), "r" (IOP321_OCCAR), "r" (IOP321_OCCDR)); + + return val; +} + +/* + * The read routines must check the error status of the last configuration + * cycle. If there was an error, the routine returns all hex f's. + */ +static int +iop321_read_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *value) +{ + unsigned long addr = iop321_cfg_address(bus, devfn, where); + u32 val = iop321_read(addr) >> ((where & 3) * 8); + + if( iop321_pci_status() ) + val = 0xffffffff; + + *value = val; + + return PCIBIOS_SUCCESSFUL; +} + +static int +iop321_write_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 value) +{ + unsigned long addr = iop321_cfg_address(bus, devfn, where); + u32 val; + + if (size != 4) { + val = iop321_read(addr); + if (!iop321_pci_status() == 0) + return PCIBIOS_SUCCESSFUL; + + where = (where & 3) * 8; + + if (size == 1) + val &= ~(0xff << where); + else + val &= ~(0xffff << where); + + *IOP321_OCCDR = val | value << where; + } else { + asm volatile( + "str %1, [%2]\n\t" + "str %0, [%3]\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + : + : "r" (value), "r" (addr), + "r" (IOP321_OCCAR), "r" (IOP321_OCCDR)); + } + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops iop321_ops = { + .read = iop321_read_config, + .write = iop321_write_config, +}; + +/* + * When a PCI device does not exist during config cycles, the 80200 gets a + * bus error instead of returning 0xffffffff. This handler simply returns. + */ +int +iop321_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) +{ + DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n", + addr, fsr, regs->ARM_pc, regs->ARM_lr); + + /* + * If it was an imprecise abort, then we need to correct the + * return address to be _after_ the instruction. + */ + if (fsr & (1 << 10)) + regs->ARM_pc += 4; + + return 0; +} + +/* + * Scan an IOP321 PCI bus. sys->bus defines which bus we scan. + */ +struct pci_bus *iop321_scan_bus(int nr, struct pci_sys_data *sys) +{ + return pci_scan_bus(sys->busnr, &iop321_ops, sys); +} + +void iop321_init(void) +{ + DBG("PCI: Intel 80321 PCI init code.\n"); + DBG("ATU: IOP321_ATUCMD=0x%04x\n", *IOP321_ATUCMD); + DBG("ATU: IOP321_OMWTVR0=0x%04x, IOP321_OIOWTVR=0x%04x\n", + *IOP321_OMWTVR0, + *IOP321_OIOWTVR); + DBG("ATU: IOP321_ATUCR=0x%08x\n", *IOP321_ATUCR); + DBG("ATU: IOP321_IABAR0=0x%08x IOP321_IALR0=0x%08x IOP321_IATVR0=%08x\n", + *IOP321_IABAR0, *IOP321_IALR0, *IOP321_IATVR0); + DBG("ATU: IOP321_OMWTVR0=0x%08x\n", *IOP321_OMWTVR0); + DBG("ATU: IOP321_IABAR1=0x%08x IOP321_IALR1=0x%08x\n", + *IOP321_IABAR1, *IOP321_IALR1); + DBG("ATU: IOP321_ERBAR=0x%08x IOP321_ERLR=0x%08x IOP321_ERTVR=%08x\n", + *IOP321_ERBAR, *IOP321_ERLR, *IOP321_ERTVR); + DBG("ATU: IOP321_IABAR2=0x%08x IOP321_IALR2=0x%08x IOP321_IATVR2=%08x\n", + *IOP321_IABAR2, *IOP321_IALR2, *IOP321_IATVR2); + DBG("ATU: IOP321_IABAR3=0x%08x IOP321_IALR3=0x%08x IOP321_IATVR3=%08x\n", + *IOP321_IABAR3, *IOP321_IALR3, *IOP321_IATVR3); + + hook_fault_code(16+6, iop321_pci_abort, SIGBUS, "imprecise external abort"); +} + diff --git a/arch/arm/mach-iop32x/setup.c b/arch/arm/mach-iop32x/setup.c new file mode 100644 index 00000000000..72967879927 --- /dev/null +++ b/arch/arm/mach-iop32x/setup.c @@ -0,0 +1,173 @@ +/* + * linux/arch/arm/mach-iop32x/setup.c + * + * Author: Nicolas Pitre + * Copyright (C) 2001 MontaVista Software, Inc. + * Copyright (C) 2004 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define IOP321_UART_XTAL 1843200 + +/* + * Standard IO mapping for all IOP321 based systems + */ +static struct map_desc iop321_std_desc[] __initdata = { + { /* mem mapped registers */ + .virtual = IOP321_VIRT_MEM_BASE, + .pfn = __phys_to_pfn(IOP321_PHYS_MEM_BASE), + .length = 0x00002000, + .type = MT_DEVICE + }, { /* PCI IO space */ + .virtual = IOP321_PCI_LOWER_IO_VA, + .pfn = __phys_to_pfn(IOP321_PCI_LOWER_IO_PA), + .length = IOP321_PCI_IO_WINDOW_SIZE, + .type = MT_DEVICE + } +}; + +#ifdef CONFIG_ARCH_IQ80321 +#define UARTBASE IQ80321_UART +#define IRQ_UART IRQ_IQ80321_UART +#endif + +#ifdef CONFIG_ARCH_IQ31244 +#define UARTBASE IQ31244_UART +#define IRQ_UART IRQ_IQ31244_UART +#endif + +static struct uart_port iop321_serial_ports[] = { + { + .membase = (char*)(UARTBASE), + .mapbase = (UARTBASE), + .irq = IRQ_UART, + .flags = UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 0, + .uartclk = IOP321_UART_XTAL, + .line = 0, + .type = PORT_16550A, + .fifosize = 16 + } +}; + +static struct resource iop32x_i2c_0_resources[] = { + [0] = { + .start = 0xfffff680, + .end = 0xfffff698, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IOP321_I2C_0, + .end = IRQ_IOP321_I2C_0, + .flags = IORESOURCE_IRQ + } +}; + +static struct resource iop32x_i2c_1_resources[] = { + [0] = { + .start = 0xfffff6a0, + .end = 0xfffff6b8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IOP321_I2C_1, + .end = IRQ_IOP321_I2C_1, + .flags = IORESOURCE_IRQ + } +}; + +static struct platform_device iop32x_i2c_0_controller = { + .name = "IOP3xx-I2C", + .id = 0, + .num_resources = 2, + .resource = iop32x_i2c_0_resources +}; + +static struct platform_device iop32x_i2c_1_controller = { + .name = "IOP3xx-I2C", + .id = 1, + .num_resources = 2, + .resource = iop32x_i2c_1_resources +}; + +static struct platform_device *iop32x_devices[] __initdata = { + &iop32x_i2c_0_controller, + &iop32x_i2c_1_controller +}; + +void __init iop32x_init(void) +{ + if(iop_is_321()) + { + platform_add_devices(iop32x_devices, + ARRAY_SIZE(iop32x_devices)); + } +} + +void __init iop321_map_io(void) +{ + iotable_init(iop321_std_desc, ARRAY_SIZE(iop321_std_desc)); + early_serial_setup(&iop321_serial_ports[0]); +} + +#ifdef CONFIG_ARCH_IQ80321 +extern void iq80321_map_io(void); +extern struct sys_timer iop321_timer; +extern void iop321_init_time(void); +#endif + +#ifdef CONFIG_ARCH_IQ31244 +extern void iq31244_map_io(void); +extern struct sys_timer iop321_timer; +extern void iop321_init_time(void); +#endif + +#if defined(CONFIG_ARCH_IQ80321) +MACHINE_START(IQ80321, "Intel IQ80321") + /* Maintainer: Intel Corporation */ + .phys_io = IQ80321_UART, + .io_pg_offst = ((IQ80321_UART) >> 18) & 0xfffc, + .map_io = iq80321_map_io, + .init_irq = iop321_init_irq, + .timer = &iop321_timer, + .boot_params = 0xa0000100, + .init_machine = iop32x_init, +MACHINE_END +#elif defined(CONFIG_ARCH_IQ31244) +MACHINE_START(IQ31244, "Intel IQ31244") + /* Maintainer: Intel Corp. */ + .phys_io = IQ31244_UART, + .io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc, + .map_io = iq31244_map_io, + .init_irq = iop321_init_irq, + .timer = &iop321_timer, + .boot_params = 0xa0000100, + .init_machine = iop32x_init, +MACHINE_END +#else +#error No machine descriptor defined for this IOP3XX implementation +#endif diff --git a/arch/arm/mach-iop32x/time.c b/arch/arm/mach-iop32x/time.c new file mode 100644 index 00000000000..3cabbbca0a0 --- /dev/null +++ b/arch/arm/mach-iop32x/time.c @@ -0,0 +1,108 @@ +/* + * arch/arm/mach-iop32x/time.c + * + * Timer code for IOP321 based systems + * + * Author: Deepak Saxena + * + * Copyright 2002-2003 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#define IOP321_TIME_SYNC 0 + +static inline unsigned long get_elapsed(void) +{ + return LATCH - *IOP321_TU_TCR0; +} + +static unsigned long iop321_gettimeoffset(void) +{ + unsigned long elapsed, usec; + u32 tisr1, tisr2; + + /* + * If an interrupt was pending before we read the timer, + * we've already wrapped. Factor this into the time. + * If an interrupt was pending after we read the timer, + * it may have wrapped between checking the interrupt + * status and reading the timer. Re-read the timer to + * be sure its value is after the wrap. + */ + + asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr1)); + elapsed = get_elapsed(); + asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr2)); + + if(tisr1 & 1) + elapsed += LATCH; + else if (tisr2 & 1) + elapsed = LATCH + get_elapsed(); + + /* + * Now convert them to usec. + */ + usec = (unsigned long)(elapsed / (CLOCK_TICK_RATE/1000000)); + + return usec; +} + +static irqreturn_t +iop321_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + u32 tisr; + + write_seqlock(&xtime_lock); + + asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr)); + tisr |= 1; + asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (tisr)); + + timer_tick(regs); + + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; +} + +static struct irqaction iop321_timer_irq = { + .name = "IOP321 Timer Tick", + .handler = iop321_timer_interrupt, + .flags = IRQF_DISABLED | IRQF_TIMER, +}; + +static void __init iop321_timer_init(void) +{ + u32 timer_ctl; + + setup_irq(IRQ_IOP321_TIMER0, &iop321_timer_irq); + + timer_ctl = IOP321_TMR_EN | IOP321_TMR_PRIVILEGED | IOP321_TMR_RELOAD | + IOP321_TMR_RATIO_1_1; + + asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (LATCH)); + + asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (timer_ctl)); +} + +struct sys_timer iop321_timer = { + .init = &iop321_timer_init, + .offset = iop321_gettimeoffset, +}; diff --git a/arch/arm/mach-iop33x/Kconfig b/arch/arm/mach-iop33x/Kconfig new file mode 100644 index 00000000000..410df546e95 --- /dev/null +++ b/arch/arm/mach-iop33x/Kconfig @@ -0,0 +1,27 @@ +if ARCH_IOP33X + +menu "IOP33x Implementation Options" + +comment "IOP33x Platform Types" + +config ARCH_IQ80331 + bool "Enable support for IQ80331" + help + Say Y here if you want to run your kernel on the Intel IQ80331 + evaluation kit for the IOP331 chipset. + +config MACH_IQ80332 + bool "Enable support for IQ80332" + help + Say Y here if you want to run your kernel on the Intel IQ80332 + evaluation kit for the IOP332 chipset. + +config IOP331_STEPD + bool "Chip stepping D of the IOP80331 processor or IOP80333" + help + Say Y here if you have StepD of the IOP80331 or IOP8033 + based platforms. + +endmenu + +endif diff --git a/arch/arm/mach-iop33x/Makefile b/arch/arm/mach-iop33x/Makefile new file mode 100644 index 00000000000..0f1a8fffe18 --- /dev/null +++ b/arch/arm/mach-iop33x/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for the linux kernel. +# + +obj-y := common.o setup.o irq.o pci.o time.o +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_ARCH_IQ80331) += iq80331-mm.o iq80331-pci.o +obj-$(CONFIG_MACH_IQ80332) += iq80332-mm.o iq80332-pci.o diff --git a/arch/arm/mach-iop33x/Makefile.boot b/arch/arm/mach-iop33x/Makefile.boot new file mode 100644 index 00000000000..67039c3e0c4 --- /dev/null +++ b/arch/arm/mach-iop33x/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-iop33x/common.c b/arch/arm/mach-iop33x/common.c new file mode 100644 index 00000000000..dd75f2b8e74 --- /dev/null +++ b/arch/arm/mach-iop33x/common.c @@ -0,0 +1,22 @@ +/* + * arch/arm/mach-iop33x/common.c + * + * Common routines shared across all IOP3xx implementations + * + * Author: Deepak Saxena + * + * Copyright 2003 (c) MontaVista, Software, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include + +/* + * Shared variables + */ +unsigned long iop3xx_pcibios_min_io = 0; +unsigned long iop3xx_pcibios_min_mem = 0; diff --git a/arch/arm/mach-iop33x/iq80331-mm.c b/arch/arm/mach-iop33x/iq80331-mm.c new file mode 100644 index 00000000000..eb59445a0fc --- /dev/null +++ b/arch/arm/mach-iop33x/iq80331-mm.c @@ -0,0 +1,35 @@ +/* + * linux/arch/arm/mach-iop33x/iq80331-mm.c + * + * Low level memory initialization for iq80331 platform + * + * Author: Dave Jiang + * Copyright (C) 2003 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include + +#include +#include +#include + +#include + + +/* + * IQ80331 specific IO mappings + * + * We use RedBoot's setup for the onboard devices. + */ + +void __init iq80331_map_io(void) +{ + iop331_map_io(); +} diff --git a/arch/arm/mach-iop33x/iq80331-pci.c b/arch/arm/mach-iop33x/iq80331-pci.c new file mode 100644 index 00000000000..71adb12a942 --- /dev/null +++ b/arch/arm/mach-iop33x/iq80331-pci.c @@ -0,0 +1,119 @@ +/* + * arch/arm/mach-iop33x/iq80331-pci.c + * + * PCI support for the Intel IQ80331 reference board + * + * Author: Dave Jiang + * Copyright (C) 2003, 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* + * The following macro is used to lookup irqs in a standard table + * format for those systems that do not already have PCI + * interrupts properly routed. We assume 1 <= pin <= 4 + */ +#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \ +({ int _ctl_ = -1; \ + unsigned int _idsel = idsel - minid; \ + if (_idsel <= maxid) \ + _ctl_ = pci_irq_table[_idsel][pin-1]; \ + _ctl_; }) + +#define INTA IRQ_IQ80331_INTA +#define INTB IRQ_IQ80331_INTB +#define INTC IRQ_IQ80331_INTC +#define INTD IRQ_IQ80331_INTD + +//#define INTE IRQ_IQ80331_I82544 + +static inline int __init +iq80331_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) +{ + static int pci_irq_table[][4] = { + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + {INTB, INTC, INTD, INTA}, /* PCI-X Slot */ + {INTC, INTC, INTC, INTC}, /* GigE */ + }; + + BUG_ON(pin < 1 || pin > 4); + + return PCI_IRQ_TABLE_LOOKUP(1, 7); +} + +static int iq80331_setup(int nr, struct pci_sys_data *sys) +{ + struct resource *res; + + if(nr != 0) + return 0; + + res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); + if (!res) + panic("PCI: unable to alloc resources"); + + res[0].start = IOP331_PCI_LOWER_IO_VA; + res[0].end = IOP331_PCI_UPPER_IO_VA; + res[0].name = "IQ80331 PCI I/O Space"; + res[0].flags = IORESOURCE_IO; + + res[1].start = IOP331_PCI_LOWER_MEM_PA; + res[1].end = IOP331_PCI_UPPER_MEM_PA; + res[1].name = "IQ80331 PCI Memory Space"; + res[1].flags = IORESOURCE_MEM; + + request_resource(&ioport_resource, &res[0]); + request_resource(&iomem_resource, &res[1]); + + sys->mem_offset = IOP331_PCI_MEM_OFFSET; + sys->io_offset = IOP331_PCI_IO_OFFSET; + + sys->resource[0] = &res[0]; + sys->resource[1] = &res[1]; + sys->resource[2] = NULL; + + return 1; +} + +static void iq80331_preinit(void) +{ + iop331_init(); +} + +static struct hw_pci iq80331_pci __initdata = { + .swizzle = pci_std_swizzle, + .nr_controllers = 1, + .setup = iq80331_setup, + .scan = iop331_scan_bus, + .preinit = iq80331_preinit, + .map_irq = iq80331_map_irq +}; + +static int __init iq80331_pci_init(void) +{ + if (machine_is_iq80331()) + pci_common_init(&iq80331_pci); + return 0; +} + +subsys_initcall(iq80331_pci_init); + + + + diff --git a/arch/arm/mach-iop33x/iq80332-mm.c b/arch/arm/mach-iop33x/iq80332-mm.c new file mode 100644 index 00000000000..f7bc73113ea --- /dev/null +++ b/arch/arm/mach-iop33x/iq80332-mm.c @@ -0,0 +1,35 @@ +/* + * linux/arch/arm/mach-iop33x/iq80332-mm.c + * + * Low level memory initialization for iq80332 platform + * + * Author: Dave Jiang + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include + +#include +#include +#include + +#include + + +/* + * IQ80332 specific IO mappings + * + * We use RedBoot's setup for the onboard devices. + */ + +void __init iq80332_map_io(void) +{ + iop331_map_io(); +} diff --git a/arch/arm/mach-iop33x/iq80332-pci.c b/arch/arm/mach-iop33x/iq80332-pci.c new file mode 100644 index 00000000000..f3010f85b1a --- /dev/null +++ b/arch/arm/mach-iop33x/iq80332-pci.c @@ -0,0 +1,125 @@ +/* + * arch/arm/mach-iop33x/iq80332-pci.c + * + * PCI support for the Intel IQ80332 reference board + * + * Author: Dave Jiang + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* + * The following macro is used to lookup irqs in a standard table + * format for those systems that do not already have PCI + * interrupts properly routed. We assume 1 <= pin <= 4 + */ +#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \ +({ int _ctl_ = -1; \ + unsigned int _idsel = idsel - minid; \ + if (_idsel <= maxid) \ + _ctl_ = pci_irq_table[_idsel][pin-1]; \ + _ctl_; }) + +#define INTA IRQ_IQ80332_INTA +#define INTB IRQ_IQ80332_INTB +#define INTC IRQ_IQ80332_INTC +#define INTD IRQ_IQ80332_INTD + +//#define INTE IRQ_IQ80332_I82544 + +static inline int __init +iq80332_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) +{ + static int pci_irq_table[][8] = { + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + {-1, -1, -1, -1}, + {-1, -1, -1, -1}, + {-1, -1, -1, -1}, + {INTA, INTB, INTC, INTD}, /* PCI-X Slot */ + {-1, -1, -1, -1}, + {INTC, INTC, INTC, INTC}, /* GigE */ + {-1, -1, -1, -1}, + {-1, -1, -1, -1}, + }; + + BUG_ON(pin < 1 || pin > 4); + + return PCI_IRQ_TABLE_LOOKUP(1, 7); +} + +static int iq80332_setup(int nr, struct pci_sys_data *sys) +{ + struct resource *res; + + if(nr != 0) + return 0; + + res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); + if (!res) + panic("PCI: unable to alloc resources"); + + res[0].start = IOP331_PCI_LOWER_IO_VA; + res[0].end = IOP331_PCI_UPPER_IO_VA; + res[0].name = "IQ80332 PCI I/O Space"; + res[0].flags = IORESOURCE_IO; + + res[1].start = IOP331_PCI_LOWER_MEM_PA; + res[1].end = IOP331_PCI_UPPER_MEM_PA; + res[1].name = "IQ80332 PCI Memory Space"; + res[1].flags = IORESOURCE_MEM; + + request_resource(&ioport_resource, &res[0]); + request_resource(&iomem_resource, &res[1]); + + sys->mem_offset = IOP331_PCI_MEM_OFFSET; + sys->io_offset = IOP331_PCI_IO_OFFSET; + + sys->resource[0] = &res[0]; + sys->resource[1] = &res[1]; + sys->resource[2] = NULL; + + return 1; +} + +static void iq80332_preinit(void) +{ + iop331_init(); +} + +static struct hw_pci iq80332_pci __initdata = { + .swizzle = pci_std_swizzle, + .nr_controllers = 1, + .setup = iq80332_setup, + .scan = iop331_scan_bus, + .preinit = iq80332_preinit, + .map_irq = iq80332_map_irq +}; + +static int __init iq80332_pci_init(void) +{ + if (machine_is_iq80332()) + pci_common_init(&iq80332_pci); + return 0; +} + +subsys_initcall(iq80332_pci_init); + + + + diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c new file mode 100644 index 00000000000..029fa78876a --- /dev/null +++ b/arch/arm/mach-iop33x/irq.c @@ -0,0 +1,129 @@ +/* + * linux/arch/arm/mach-iop33x/irq.c + * + * Generic IOP331 IRQ handling functionality + * + * Author: Dave Jiang + * Copyright (C) 2003 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * + */ +#include +#include +#include + +#include +#include +#include + +#include + +static u32 iop331_mask0 = 0; +static u32 iop331_mask1 = 0; + +static inline void intctl_write0(u32 val) +{ + // INTCTL0 + asm volatile("mcr p6,0,%0,c0,c0,0"::"r" (val)); +} + +static inline void intctl_write1(u32 val) +{ + // INTCTL1 + asm volatile("mcr p6,0,%0,c1,c0,0"::"r" (val)); +} + +static inline void intstr_write0(u32 val) +{ + // INTSTR0 + asm volatile("mcr p6,0,%0,c2,c0,0"::"r" (val)); +} + +static inline void intstr_write1(u32 val) +{ + // INTSTR1 + asm volatile("mcr p6,0,%0,c3,c0,0"::"r" (val)); +} + +static void +iop331_irq_mask1 (unsigned int irq) +{ + iop331_mask0 &= ~(1 << (irq - IOP331_IRQ_OFS)); + intctl_write0(iop331_mask0); +} + +static void +iop331_irq_mask2 (unsigned int irq) +{ + iop331_mask1 &= ~(1 << (irq - IOP331_IRQ_OFS - 32)); + intctl_write1(iop331_mask1); +} + +static void +iop331_irq_unmask1(unsigned int irq) +{ + iop331_mask0 |= (1 << (irq - IOP331_IRQ_OFS)); + intctl_write0(iop331_mask0); +} + +static void +iop331_irq_unmask2(unsigned int irq) +{ + iop331_mask1 |= (1 << (irq - IOP331_IRQ_OFS - 32)); + intctl_write1(iop331_mask1); +} + +struct irq_chip iop331_irqchip1 = { + .name = "IOP-1", + .ack = iop331_irq_mask1, + .mask = iop331_irq_mask1, + .unmask = iop331_irq_unmask1, +}; + +struct irq_chip iop331_irqchip2 = { + .name = "IOP-2", + .ack = iop331_irq_mask2, + .mask = iop331_irq_mask2, + .unmask = iop331_irq_unmask2, +}; + +void __init iop331_init_irq(void) +{ + unsigned int i, tmp; + + /* Enable access to coprocessor 6 for dealing with IRQs. + * From RMK: + * Basically, the Intel documentation here is poor. It appears that + * you need to set the bit to be able to access the coprocessor from + * SVC mode. Whether that allows access from user space or not is + * unclear. + */ + asm volatile ( + "mrc p15, 0, %0, c15, c1, 0\n\t" + "orr %0, %0, %1\n\t" + "mcr p15, 0, %0, c15, c1, 0\n\t" + /* The action is delayed, so we have to do this: */ + "mrc p15, 0, %0, c15, c1, 0\n\t" + "mov %0, %0\n\t" + "sub pc, pc, #4" + : "=r" (tmp) : "i" (1 << 6) ); + + intctl_write0(0); // disable all interrupts + intctl_write1(0); + intstr_write0(0); // treat all as IRQ + intstr_write1(0); + if(machine_is_iq80331()) // all interrupts are inputs to chip + *IOP331_PCIIRSR = 0x0f; + + for(i = IOP331_IRQ_OFS; i < NR_IRQS; i++) + { + set_irq_chip(i, (i < 32) ? &iop331_irqchip1 : &iop331_irqchip2); + set_irq_handler(i, do_level_IRQ); + set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + } +} + diff --git a/arch/arm/mach-iop33x/pci.c b/arch/arm/mach-iop33x/pci.c new file mode 100644 index 00000000000..bf6aba91b47 --- /dev/null +++ b/arch/arm/mach-iop33x/pci.c @@ -0,0 +1,222 @@ +/* + * arch/arm/mach-iop33x/pci.c + * + * PCI support for the Intel IOP331 chipset + * + * Author: Dave Jiang (dave.jiang@intel.com) + * Copyright (C) 2003, 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include + +#undef DEBUG +#undef DEBUG1 + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) do { } while (0) +#endif + +#ifdef DEBUG1 +#define DBG1(x...) printk(x) +#else +#define DBG1(x...) do { } while (0) +#endif + +/* + * This routine builds either a type0 or type1 configuration command. If the + * bus is on the 80331 then a type0 made, else a type1 is created. + */ +static u32 iop331_cfg_address(struct pci_bus *bus, int devfn, int where) +{ + struct pci_sys_data *sys = bus->sysdata; + u32 addr; + + if (sys->busnr == bus->number) + addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11); + else + addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1; + + addr |= PCI_FUNC(devfn) << 8 | (where & ~3); + + return addr; +} + +/* + * This routine checks the status of the last configuration cycle. If an error + * was detected it returns a 1, else it returns a 0. The errors being checked + * are parity, master abort, target abort (master and target). These types of + * errors occure during a config cycle where there is no device, like during + * the discovery stage. + */ +static int iop331_pci_status(void) +{ + unsigned int status; + int ret = 0; + + /* + * Check the status registers. + */ + status = *IOP331_ATUSR; + if (status & 0xf900) + { + DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status); + *IOP331_ATUSR = status & 0xf900; + ret = 1; + } + status = *IOP331_ATUISR; + if (status & 0x679f) + { + DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status); + *IOP331_ATUISR = status & 0x679f; + ret = 1; + } + return ret; +} + +/* + * Simply write the address register and read the configuration + * data. Note that the 4 nop's ensure that we are able to handle + * a delayed abort (in theory.) + */ +static inline u32 iop331_read(unsigned long addr) +{ + u32 val; + + __asm__ __volatile__( + "str %1, [%2]\n\t" + "ldr %0, [%3]\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + : "=r" (val) + : "r" (addr), "r" (IOP331_OCCAR), "r" (IOP331_OCCDR)); + + return val; +} + +/* + * The read routines must check the error status of the last configuration + * cycle. If there was an error, the routine returns all hex f's. + */ +static int +iop331_read_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *value) +{ + unsigned long addr = iop331_cfg_address(bus, devfn, where); + u32 val = iop331_read(addr) >> ((where & 3) * 8); + + if( iop331_pci_status() ) + val = 0xffffffff; + + *value = val; + + return PCIBIOS_SUCCESSFUL; +} + +static int +iop331_write_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 value) +{ + unsigned long addr = iop331_cfg_address(bus, devfn, where); + u32 val; + + if (size != 4) { + val = iop331_read(addr); + if (!iop331_pci_status() == 0) + return PCIBIOS_SUCCESSFUL; + + where = (where & 3) * 8; + + if (size == 1) + val &= ~(0xff << where); + else + val &= ~(0xffff << where); + + *IOP331_OCCDR = val | value << where; + } else { + asm volatile( + "str %1, [%2]\n\t" + "str %0, [%3]\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + : + : "r" (value), "r" (addr), + "r" (IOP331_OCCAR), "r" (IOP331_OCCDR)); + } + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops iop331_ops = { + .read = iop331_read_config, + .write = iop331_write_config, +}; + +/* + * When a PCI device does not exist during config cycles, the XScale gets a + * bus error instead of returning 0xffffffff. This handler simply returns. + */ +int +iop331_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) +{ + DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n", + addr, fsr, regs->ARM_pc, regs->ARM_lr); + + /* + * If it was an imprecise abort, then we need to correct the + * return address to be _after_ the instruction. + */ + if (fsr & (1 << 10)) + regs->ARM_pc += 4; + + return 0; +} + +/* + * Scan an IOP331 PCI bus. sys->bus defines which bus we scan. + */ +struct pci_bus *iop331_scan_bus(int nr, struct pci_sys_data *sys) +{ + return pci_scan_bus(sys->busnr, &iop331_ops, sys); +} + +void iop331_init(void) +{ + DBG1("PCI: Intel 80331 PCI init code.\n"); + DBG1("\tATU: IOP331_ATUCMD=0x%04x\n", *IOP331_ATUCMD); + DBG1("\tATU: IOP331_OMWTVR0=0x%04x, IOP331_OIOWTVR=0x%04x\n", + *IOP331_OMWTVR0, + *IOP331_OIOWTVR); + DBG1("\tATU: IOP331_OMWTVR1=0x%04x\n", *IOP331_OMWTVR1); + DBG1("\tATU: IOP331_ATUCR=0x%08x\n", *IOP331_ATUCR); + DBG1("\tATU: IOP331_IABAR0=0x%08x IOP331_IALR0=0x%08x IOP331_IATVR0=%08x\n", *IOP331_IABAR0, *IOP331_IALR0, *IOP331_IATVR0); + DBG1("\tATU: IOP31_IABAR1=0x%08x IOP331_IALR1=0x%08x\n", *IOP331_IABAR1, *IOP331_IALR1); + DBG1("\tATU: IOP331_ERBAR=0x%08x IOP331_ERLR=0x%08x IOP331_ERTVR=%08x\n", *IOP331_ERBAR, *IOP331_ERLR, *IOP331_ERTVR); + DBG1("\tATU: IOP331_IABAR2=0x%08x IOP331_IALR2=0x%08x IOP331_IATVR2=%08x\n", *IOP331_IABAR2, *IOP331_IALR2, *IOP331_IATVR2); + DBG1("\tATU: IOP331_IABAR3=0x%08x IOP331_IALR3=0x%08x IOP331_IATVR3=%08x\n", *IOP331_IABAR3, *IOP331_IALR3, *IOP331_IATVR3); + + hook_fault_code(16+6, iop331_pci_abort, SIGBUS, "imprecise external abort"); +} + diff --git a/arch/arm/mach-iop33x/setup.c b/arch/arm/mach-iop33x/setup.c new file mode 100644 index 00000000000..c14c7da5ec4 --- /dev/null +++ b/arch/arm/mach-iop33x/setup.c @@ -0,0 +1,221 @@ +/* + * linux/arch/arm/mach-iop33x/setup.c + * + * Author: Dave Jiang (dave.jiang@intel.com) + * Copyright (C) 2004 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define IOP331_UART_XTAL 33334000 + +/* + * Standard IO mapping for all IOP331 based systems + */ +static struct map_desc iop331_std_desc[] __initdata = { + { /* mem mapped registers */ + .virtual = IOP331_VIRT_MEM_BASE, + .pfn = __phys_to_pfn(IOP331_PHYS_MEM_BASE), + .length = 0x00002000, + .type = MT_DEVICE + }, { /* PCI IO space */ + .virtual = IOP331_PCI_LOWER_IO_VA, + .pfn = __phys_to_pfn(IOP331_PCI_LOWER_IO_PA), + .length = IOP331_PCI_IO_WINDOW_SIZE, + .type = MT_DEVICE + } +}; + +static struct resource iop33x_uart0_resources[] = { + [0] = { + .start = IOP331_UART0_PHYS, + .end = IOP331_UART0_PHYS + 0x3f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IOP331_UART0, + .end = IRQ_IOP331_UART0, + .flags = IORESOURCE_IRQ + } +}; + +static struct resource iop33x_uart1_resources[] = { + [0] = { + .start = IOP331_UART1_PHYS, + .end = IOP331_UART1_PHYS + 0x3f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IOP331_UART1, + .end = IRQ_IOP331_UART1, + .flags = IORESOURCE_IRQ + } +}; + +static struct plat_serial8250_port iop33x_uart0_data[] = { + { + .membase = (char*)(IOP331_UART0_VIRT), + .mapbase = (IOP331_UART0_PHYS), + .irq = IRQ_IOP331_UART0, + .uartclk = IOP331_UART_XTAL, + .regshift = 2, + .iotype = UPIO_MEM, + .flags = UPF_SKIP_TEST, + }, + { }, +}; + +static struct plat_serial8250_port iop33x_uart1_data[] = { + { + .membase = (char*)(IOP331_UART1_VIRT), + .mapbase = (IOP331_UART1_PHYS), + .irq = IRQ_IOP331_UART1, + .uartclk = IOP331_UART_XTAL, + .regshift = 2, + .iotype = UPIO_MEM, + .flags = UPF_SKIP_TEST, + }, + { }, +}; + +static struct platform_device iop33x_uart0 = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = iop33x_uart0_data, + .num_resources = 2, + .resource = iop33x_uart0_resources, +}; + +static struct platform_device iop33x_uart1 = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM1, + .dev.platform_data = iop33x_uart1_data, + .num_resources = 2, + .resource = iop33x_uart1_resources, +}; + +static struct resource iop33x_i2c_0_resources[] = { + [0] = { + .start = 0xfffff680, + .end = 0xfffff698, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IOP331_I2C_0, + .end = IRQ_IOP331_I2C_0, + .flags = IORESOURCE_IRQ + } +}; + +static struct resource iop33x_i2c_1_resources[] = { + [0] = { + .start = 0xfffff6a0, + .end = 0xfffff6b8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IOP331_I2C_1, + .end = IRQ_IOP331_I2C_1, + .flags = IORESOURCE_IRQ + } +}; + +static struct platform_device iop33x_i2c_0_controller = { + .name = "IOP3xx-I2C", + .id = 0, + .num_resources = 2, + .resource = iop33x_i2c_0_resources +}; + +static struct platform_device iop33x_i2c_1_controller = { + .name = "IOP3xx-I2C", + .id = 1, + .num_resources = 2, + .resource = iop33x_i2c_1_resources +}; + +static struct platform_device *iop33x_devices[] __initdata = { + &iop33x_uart0, + &iop33x_uart1, + &iop33x_i2c_0_controller, + &iop33x_i2c_1_controller +}; + +void __init iop33x_init(void) +{ + if(iop_is_331()) + { + platform_add_devices(iop33x_devices, + ARRAY_SIZE(iop33x_devices)); + } +} + +void __init iop331_map_io(void) +{ + iotable_init(iop331_std_desc, ARRAY_SIZE(iop331_std_desc)); +} + +#ifdef CONFIG_ARCH_IOP33X +extern void iop331_init_irq(void); +extern struct sys_timer iop331_timer; +#endif + +#ifdef CONFIG_ARCH_IQ80331 +extern void iq80331_map_io(void); +#endif + +#ifdef CONFIG_MACH_IQ80332 +extern void iq80332_map_io(void); +#endif + +#if defined(CONFIG_ARCH_IQ80331) +MACHINE_START(IQ80331, "Intel IQ80331") + /* Maintainer: Intel Corp. */ + .phys_io = 0xfefff000, + .io_pg_offst = ((0xfffff000) >> 18) & 0xfffc, // virtual, physical + .map_io = iq80331_map_io, + .init_irq = iop331_init_irq, + .timer = &iop331_timer, + .boot_params = 0x0100, + .init_machine = iop33x_init, +MACHINE_END + +#elif defined(CONFIG_MACH_IQ80332) +MACHINE_START(IQ80332, "Intel IQ80332") + /* Maintainer: Intel Corp. */ + .phys_io = 0xfefff000, + .io_pg_offst = ((0xfffff000) >> 18) & 0xfffc, // virtual, physical + .map_io = iq80332_map_io, + .init_irq = iop331_init_irq, + .timer = &iop331_timer, + .boot_params = 0x0100, + .init_machine = iop33x_init, +MACHINE_END + +#else +#error No machine descriptor defined for this IOP3XX implementation +#endif + + diff --git a/arch/arm/mach-iop33x/time.c b/arch/arm/mach-iop33x/time.c new file mode 100644 index 00000000000..d839cd0d926 --- /dev/null +++ b/arch/arm/mach-iop33x/time.c @@ -0,0 +1,106 @@ +/* + * arch/arm/mach-iop33x/time.c + * + * Timer code for IOP331 based systems + * + * Author: Dave Jiang + * + * Copyright 2003 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +static inline unsigned long get_elapsed(void) +{ + return LATCH - *IOP331_TU_TCR0; +} + +static unsigned long iop331_gettimeoffset(void) +{ + unsigned long elapsed, usec; + u32 tisr1, tisr2; + + /* + * If an interrupt was pending before we read the timer, + * we've already wrapped. Factor this into the time. + * If an interrupt was pending after we read the timer, + * it may have wrapped between checking the interrupt + * status and reading the timer. Re-read the timer to + * be sure its value is after the wrap. + */ + + asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr1)); + elapsed = get_elapsed(); + asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr2)); + + if(tisr1 & 1) + elapsed += LATCH; + else if (tisr2 & 1) + elapsed = LATCH + get_elapsed(); + + /* + * Now convert them to usec. + */ + usec = (unsigned long)(elapsed / (CLOCK_TICK_RATE/1000000)); + + return usec; +} + +static irqreturn_t +iop331_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + u32 tisr; + + write_seqlock(&xtime_lock); + + asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr)); + tisr |= 1; + asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (tisr)); + + timer_tick(regs); + + write_sequnlock(&xtime_lock); + return IRQ_HANDLED; +} + +static struct irqaction iop331_timer_irq = { + .name = "IOP331 Timer Tick", + .handler = iop331_timer_interrupt, + .flags = IRQF_DISABLED | IRQF_TIMER, +}; + +static void __init iop331_timer_init(void) +{ + u32 timer_ctl; + + setup_irq(IRQ_IOP331_TIMER0, &iop331_timer_irq); + + timer_ctl = IOP331_TMR_EN | IOP331_TMR_PRIVILEGED | IOP331_TMR_RELOAD | + IOP331_TMR_RATIO_1_1; + + asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (LATCH)); + + asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (timer_ctl)); + +} + +struct sys_timer iop331_timer = { + .init = iop331_timer_init, + .offset = iop331_gettimeoffset, +}; diff --git a/arch/arm/mach-iop3xx/Kconfig b/arch/arm/mach-iop3xx/Kconfig deleted file mode 100644 index 887c3753727..00000000000 --- a/arch/arm/mach-iop3xx/Kconfig +++ /dev/null @@ -1,66 +0,0 @@ -if ARCH_IOP3XX - -menu "IOP3xx Implementation Options" - -comment "IOP3xx Platform Types" - -config ARCH_IQ80321 - bool "Enable support for IQ80321" - select ARCH_IOP32X - help - Say Y here if you want to run your kernel on the Intel IQ80321 - evaluation kit for the IOP321 chipset. - -config ARCH_IQ31244 - bool "Enable support for IQ31244" - select ARCH_IOP32X - help - Say Y here if you want to run your kernel on the Intel IQ31244 - evaluation kit for the IOP321 chipset. - -config ARCH_IQ80331 - bool "Enable support for IQ80331" - select ARCH_IOP33X - help - Say Y here if you want to run your kernel on the Intel IQ80331 - evaluation kit for the IOP331 chipset. - -config MACH_IQ80332 - bool "Enable support for IQ80332" - select ARCH_IOP33X - help - Say Y here if you want to run your kernel on the Intel IQ80332 - evaluation kit for the IOP332 chipset. - -config ARCH_EP80219 - bool "Enable support for EP80219" - select ARCH_IOP32X - select ARCH_IQ31244 - help - Say Y here if you want to run your kernel on the Intel EP80219 - evaluation kit for the Intel 80219 chipset (a IOP321 variant). - -# Which IOP variant are we running? -config ARCH_IOP32X - bool - help - The IQ80321 uses the IOP321 variant. - The IQ31244 and EP80219 uses the IOP321 variant. - -config ARCH_IOP33X - bool - default ARCH_IQ80331 - help - The IQ80331, IQ80332, and IQ80333 uses the IOP331 variant. - -comment "IOP3xx Chipset Features" - -config IOP331_STEPD - bool "Chip stepping D of the IOP80331 processor or IOP80333" - depends on ARCH_IOP33X - help - Say Y here if you have StepD of the IOP80331 or IOP8033 - based platforms. - -endmenu -endif diff --git a/arch/arm/mach-iop3xx/Makefile b/arch/arm/mach-iop3xx/Makefile deleted file mode 100644 index ad305152448..00000000000 --- a/arch/arm/mach-iop3xx/Makefile +++ /dev/null @@ -1,23 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. - -obj-y := common.o - -obj-m := -obj-n := -obj- := - -obj-$(CONFIG_ARCH_IOP32X) += iop321-setup.o iop321-irq.o iop321-pci.o iop321-time.o - -obj-$(CONFIG_ARCH_IOP33X) += iop331-setup.o iop331-irq.o iop331-pci.o iop331-time.o - -obj-$(CONFIG_ARCH_IQ80321) += iq80321-mm.o iq80321-pci.o - -obj-$(CONFIG_ARCH_IQ31244) += iq31244-mm.o iq31244-pci.o - -obj-$(CONFIG_ARCH_IQ80331) += iq80331-mm.o iq80331-pci.o - -obj-$(CONFIG_MACH_IQ80332) += iq80332-mm.o iq80332-pci.o diff --git a/arch/arm/mach-iop3xx/Makefile.boot b/arch/arm/mach-iop3xx/Makefile.boot deleted file mode 100644 index e120c233b70..00000000000 --- a/arch/arm/mach-iop3xx/Makefile.boot +++ /dev/null @@ -1,9 +0,0 @@ - zreladdr-y := 0xa0008000 -params_phys-y := 0xa0000100 -initrd_phys-y := 0xa0800000 -ifeq ($(CONFIG_ARCH_IOP33X),y) - zreladdr-y := 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 -endif - diff --git a/arch/arm/mach-iop3xx/common.c b/arch/arm/mach-iop3xx/common.c deleted file mode 100644 index d7f50e57e75..00000000000 --- a/arch/arm/mach-iop3xx/common.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * arch/arm/mach-iop3xx/common.c - * - * Common routines shared across all IOP3xx implementations - * - * Author: Deepak Saxena - * - * Copyright 2003 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include - -/* - * Shared variables - */ -unsigned long iop3xx_pcibios_min_io = 0; -unsigned long iop3xx_pcibios_min_mem = 0; - -#ifdef CONFIG_ARCH_EP80219 -#include -/* - * Default power-off for EP80219 - */ - -static inline void ep80219_send_to_pic(__u8 c) { -} - -void ep80219_power_off(void) -{ - /* - * This function will send a SHUTDOWN_COMPLETE message to the PIC controller - * over I2C. We are not using the i2c subsystem since we are going to power - * off and it may be removed - */ - - /* Send the Address byte w/ the start condition */ - *IOP321_IDBR1 = 0x60; - *IOP321_ICR1 = 0xE9; - mdelay(1); - - /* Send the START_MSG byte w/ no start or stop condition */ - *IOP321_IDBR1 = 0x0F; - *IOP321_ICR1 = 0xE8; - mdelay(1); - - /* Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or stop condition */ - *IOP321_IDBR1 = 0x03; - *IOP321_ICR1 = 0xE8; - mdelay(1); - - /* Send an ignored byte w/ stop condition */ - *IOP321_IDBR1 = 0x00; - *IOP321_ICR1 = 0xEA; - - while (1) ; -} - -#include -#include - -static int __init ep80219_init(void) -{ - pm_power_off = ep80219_power_off; - return 0; -} -arch_initcall(ep80219_init); -#endif diff --git a/arch/arm/mach-iop3xx/iop321-irq.c b/arch/arm/mach-iop3xx/iop321-irq.c deleted file mode 100644 index 88ac333472c..00000000000 --- a/arch/arm/mach-iop3xx/iop321-irq.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * linux/arch/arm/mach-iop3xx/iop321-irq.c - * - * Generic IOP321 IRQ handling functionality - * - * Author: Rory Bolt - * Copyright (C) 2002 Rory Bolt - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Added IOP3XX chipset and IQ80321 board masking code. - * - */ -#include -#include -#include - -#include -#include -#include - -#include - -static u32 iop321_mask /* = 0 */; - -static inline void intctl_write(u32 val) -{ - asm volatile("mcr p6,0,%0,c0,c0,0"::"r" (val)); -} - -static inline void intstr_write(u32 val) -{ - asm volatile("mcr p6,0,%0,c4,c0,0"::"r" (val)); -} - -static void -iop321_irq_mask (unsigned int irq) -{ - - iop321_mask &= ~(1 << (irq - IOP321_IRQ_OFS)); - - intctl_write(iop321_mask); -} - -static void -iop321_irq_unmask (unsigned int irq) -{ - iop321_mask |= (1 << (irq - IOP321_IRQ_OFS)); - - intctl_write(iop321_mask); -} - -struct irq_chip ext_chip = { - .name = "IOP", - .ack = iop321_irq_mask, - .mask = iop321_irq_mask, - .unmask = iop321_irq_unmask, -}; - -void __init iop321_init_irq(void) -{ - unsigned int i, tmp; - - /* Enable access to coprocessor 6 for dealing with IRQs. - * From RMK: - * Basically, the Intel documentation here is poor. It appears that - * you need to set the bit to be able to access the coprocessor from - * SVC mode. Whether that allows access from user space or not is - * unclear. - */ - asm volatile ( - "mrc p15, 0, %0, c15, c1, 0\n\t" - "orr %0, %0, %1\n\t" - "mcr p15, 0, %0, c15, c1, 0\n\t" - /* The action is delayed, so we have to do this: */ - "mrc p15, 0, %0, c15, c1, 0\n\t" - "mov %0, %0\n\t" - "sub pc, pc, #4" - : "=r" (tmp) : "i" (1 << 6) ); - - intctl_write(0); // disable all interrupts - intstr_write(0); // treat all as IRQ - if(machine_is_iq80321() || - machine_is_iq31244()) // all interrupts are inputs to chip - *IOP321_PCIIRSR = 0x0f; - - for(i = IOP321_IRQ_OFS; i < NR_IOP321_IRQS; i++) - { - set_irq_chip(i, &ext_chip); - set_irq_handler(i, do_level_IRQ); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - - } -} - diff --git a/arch/arm/mach-iop3xx/iop321-pci.c b/arch/arm/mach-iop3xx/iop321-pci.c deleted file mode 100644 index 8ba6a0e2313..00000000000 --- a/arch/arm/mach-iop3xx/iop321-pci.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * arch/arm/mach-iop3xx/iop321-pci.c - * - * PCI support for the Intel IOP321 chipset - * - * Author: Rory Bolt - * Copyright (C) 2002 Rory Bolt - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include - -// #define DEBUG - -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) do { } while (0) -#endif - -/* - * This routine builds either a type0 or type1 configuration command. If the - * bus is on the 80321 then a type0 made, else a type1 is created. - */ -static u32 iop321_cfg_address(struct pci_bus *bus, int devfn, int where) -{ - struct pci_sys_data *sys = bus->sysdata; - u32 addr; - - if (sys->busnr == bus->number) - addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11); - else - addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1; - - addr |= PCI_FUNC(devfn) << 8 | (where & ~3); - - return addr; -} - -/* - * This routine checks the status of the last configuration cycle. If an error - * was detected it returns a 1, else it returns a 0. The errors being checked - * are parity, master abort, target abort (master and target). These types of - * errors occure during a config cycle where there is no device, like during - * the discovery stage. - */ -static int iop321_pci_status(void) -{ - unsigned int status; - int ret = 0; - - /* - * Check the status registers. - */ - status = *IOP321_ATUSR; - if (status & 0xf900) - { - DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status); - *IOP321_ATUSR = status & 0xf900; - ret = 1; - } - status = *IOP321_ATUISR; - if (status & 0x679f) - { - DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status); - *IOP321_ATUISR = status & 0x679f; - ret = 1; - } - return ret; -} - -/* - * Simply write the address register and read the configuration - * data. Note that the 4 nop's ensure that we are able to handle - * a delayed abort (in theory.) - */ -static inline u32 iop321_read(unsigned long addr) -{ - u32 val; - - __asm__ __volatile__( - "str %1, [%2]\n\t" - "ldr %0, [%3]\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - : "=r" (val) - : "r" (addr), "r" (IOP321_OCCAR), "r" (IOP321_OCCDR)); - - return val; -} - -/* - * The read routines must check the error status of the last configuration - * cycle. If there was an error, the routine returns all hex f's. - */ -static int -iop321_read_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 *value) -{ - unsigned long addr = iop321_cfg_address(bus, devfn, where); - u32 val = iop321_read(addr) >> ((where & 3) * 8); - - if( iop321_pci_status() ) - val = 0xffffffff; - - *value = val; - - return PCIBIOS_SUCCESSFUL; -} - -static int -iop321_write_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 value) -{ - unsigned long addr = iop321_cfg_address(bus, devfn, where); - u32 val; - - if (size != 4) { - val = iop321_read(addr); - if (!iop321_pci_status() == 0) - return PCIBIOS_SUCCESSFUL; - - where = (where & 3) * 8; - - if (size == 1) - val &= ~(0xff << where); - else - val &= ~(0xffff << where); - - *IOP321_OCCDR = val | value << where; - } else { - asm volatile( - "str %1, [%2]\n\t" - "str %0, [%3]\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - : - : "r" (value), "r" (addr), - "r" (IOP321_OCCAR), "r" (IOP321_OCCDR)); - } - - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops iop321_ops = { - .read = iop321_read_config, - .write = iop321_write_config, -}; - -/* - * When a PCI device does not exist during config cycles, the 80200 gets a - * bus error instead of returning 0xffffffff. This handler simply returns. - */ -int -iop321_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) -{ - DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n", - addr, fsr, regs->ARM_pc, regs->ARM_lr); - - /* - * If it was an imprecise abort, then we need to correct the - * return address to be _after_ the instruction. - */ - if (fsr & (1 << 10)) - regs->ARM_pc += 4; - - return 0; -} - -/* - * Scan an IOP321 PCI bus. sys->bus defines which bus we scan. - */ -struct pci_bus *iop321_scan_bus(int nr, struct pci_sys_data *sys) -{ - return pci_scan_bus(sys->busnr, &iop321_ops, sys); -} - -void iop321_init(void) -{ - DBG("PCI: Intel 80321 PCI init code.\n"); - DBG("ATU: IOP321_ATUCMD=0x%04x\n", *IOP321_ATUCMD); - DBG("ATU: IOP321_OMWTVR0=0x%04x, IOP321_OIOWTVR=0x%04x\n", - *IOP321_OMWTVR0, - *IOP321_OIOWTVR); - DBG("ATU: IOP321_ATUCR=0x%08x\n", *IOP321_ATUCR); - DBG("ATU: IOP321_IABAR0=0x%08x IOP321_IALR0=0x%08x IOP321_IATVR0=%08x\n", - *IOP321_IABAR0, *IOP321_IALR0, *IOP321_IATVR0); - DBG("ATU: IOP321_OMWTVR0=0x%08x\n", *IOP321_OMWTVR0); - DBG("ATU: IOP321_IABAR1=0x%08x IOP321_IALR1=0x%08x\n", - *IOP321_IABAR1, *IOP321_IALR1); - DBG("ATU: IOP321_ERBAR=0x%08x IOP321_ERLR=0x%08x IOP321_ERTVR=%08x\n", - *IOP321_ERBAR, *IOP321_ERLR, *IOP321_ERTVR); - DBG("ATU: IOP321_IABAR2=0x%08x IOP321_IALR2=0x%08x IOP321_IATVR2=%08x\n", - *IOP321_IABAR2, *IOP321_IALR2, *IOP321_IATVR2); - DBG("ATU: IOP321_IABAR3=0x%08x IOP321_IALR3=0x%08x IOP321_IATVR3=%08x\n", - *IOP321_IABAR3, *IOP321_IALR3, *IOP321_IATVR3); - - hook_fault_code(16+6, iop321_pci_abort, SIGBUS, "imprecise external abort"); -} - diff --git a/arch/arm/mach-iop3xx/iop321-setup.c b/arch/arm/mach-iop3xx/iop321-setup.c deleted file mode 100644 index b6d096903c4..00000000000 --- a/arch/arm/mach-iop3xx/iop321-setup.c +++ /dev/null @@ -1,173 +0,0 @@ -/* - * linux/arch/arm/mach-iop3xx/iop321-setup.c - * - * Author: Nicolas Pitre - * Copyright (C) 2001 MontaVista Software, Inc. - * Copyright (C) 2004 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define IOP321_UART_XTAL 1843200 - -/* - * Standard IO mapping for all IOP321 based systems - */ -static struct map_desc iop321_std_desc[] __initdata = { - { /* mem mapped registers */ - .virtual = IOP321_VIRT_MEM_BASE, - .pfn = __phys_to_pfn(IOP321_PHYS_MEM_BASE), - .length = 0x00002000, - .type = MT_DEVICE - }, { /* PCI IO space */ - .virtual = IOP321_PCI_LOWER_IO_VA, - .pfn = __phys_to_pfn(IOP321_PCI_LOWER_IO_PA), - .length = IOP321_PCI_IO_WINDOW_SIZE, - .type = MT_DEVICE - } -}; - -#ifdef CONFIG_ARCH_IQ80321 -#define UARTBASE IQ80321_UART -#define IRQ_UART IRQ_IQ80321_UART -#endif - -#ifdef CONFIG_ARCH_IQ31244 -#define UARTBASE IQ31244_UART -#define IRQ_UART IRQ_IQ31244_UART -#endif - -static struct uart_port iop321_serial_ports[] = { - { - .membase = (char*)(UARTBASE), - .mapbase = (UARTBASE), - .irq = IRQ_UART, - .flags = UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 0, - .uartclk = IOP321_UART_XTAL, - .line = 0, - .type = PORT_16550A, - .fifosize = 16 - } -}; - -static struct resource iop32x_i2c_0_resources[] = { - [0] = { - .start = 0xfffff680, - .end = 0xfffff698, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IOP321_I2C_0, - .end = IRQ_IOP321_I2C_0, - .flags = IORESOURCE_IRQ - } -}; - -static struct resource iop32x_i2c_1_resources[] = { - [0] = { - .start = 0xfffff6a0, - .end = 0xfffff6b8, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IOP321_I2C_1, - .end = IRQ_IOP321_I2C_1, - .flags = IORESOURCE_IRQ - } -}; - -static struct platform_device iop32x_i2c_0_controller = { - .name = "IOP3xx-I2C", - .id = 0, - .num_resources = 2, - .resource = iop32x_i2c_0_resources -}; - -static struct platform_device iop32x_i2c_1_controller = { - .name = "IOP3xx-I2C", - .id = 1, - .num_resources = 2, - .resource = iop32x_i2c_1_resources -}; - -static struct platform_device *iop32x_devices[] __initdata = { - &iop32x_i2c_0_controller, - &iop32x_i2c_1_controller -}; - -void __init iop32x_init(void) -{ - if(iop_is_321()) - { - platform_add_devices(iop32x_devices, - ARRAY_SIZE(iop32x_devices)); - } -} - -void __init iop321_map_io(void) -{ - iotable_init(iop321_std_desc, ARRAY_SIZE(iop321_std_desc)); - early_serial_setup(&iop321_serial_ports[0]); -} - -#ifdef CONFIG_ARCH_IQ80321 -extern void iq80321_map_io(void); -extern struct sys_timer iop321_timer; -extern void iop321_init_time(void); -#endif - -#ifdef CONFIG_ARCH_IQ31244 -extern void iq31244_map_io(void); -extern struct sys_timer iop321_timer; -extern void iop321_init_time(void); -#endif - -#if defined(CONFIG_ARCH_IQ80321) -MACHINE_START(IQ80321, "Intel IQ80321") - /* Maintainer: Intel Corporation */ - .phys_io = IQ80321_UART, - .io_pg_offst = ((IQ80321_UART) >> 18) & 0xfffc, - .map_io = iq80321_map_io, - .init_irq = iop321_init_irq, - .timer = &iop321_timer, - .boot_params = 0xa0000100, - .init_machine = iop32x_init, -MACHINE_END -#elif defined(CONFIG_ARCH_IQ31244) -MACHINE_START(IQ31244, "Intel IQ31244") - /* Maintainer: Intel Corp. */ - .phys_io = IQ31244_UART, - .io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc, - .map_io = iq31244_map_io, - .init_irq = iop321_init_irq, - .timer = &iop321_timer, - .boot_params = 0xa0000100, - .init_machine = iop32x_init, -MACHINE_END -#else -#error No machine descriptor defined for this IOP3XX implementation -#endif diff --git a/arch/arm/mach-iop3xx/iop321-time.c b/arch/arm/mach-iop3xx/iop321-time.c deleted file mode 100644 index 04b1a6f7eba..00000000000 --- a/arch/arm/mach-iop3xx/iop321-time.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - * arch/arm/mach-iop3xx/iop321-time.c - * - * Timer code for IOP321 based systems - * - * Author: Deepak Saxena - * - * Copyright 2002-2003 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#define IOP321_TIME_SYNC 0 - -static inline unsigned long get_elapsed(void) -{ - return LATCH - *IOP321_TU_TCR0; -} - -static unsigned long iop321_gettimeoffset(void) -{ - unsigned long elapsed, usec; - u32 tisr1, tisr2; - - /* - * If an interrupt was pending before we read the timer, - * we've already wrapped. Factor this into the time. - * If an interrupt was pending after we read the timer, - * it may have wrapped between checking the interrupt - * status and reading the timer. Re-read the timer to - * be sure its value is after the wrap. - */ - - asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr1)); - elapsed = get_elapsed(); - asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr2)); - - if(tisr1 & 1) - elapsed += LATCH; - else if (tisr2 & 1) - elapsed = LATCH + get_elapsed(); - - /* - * Now convert them to usec. - */ - usec = (unsigned long)(elapsed / (CLOCK_TICK_RATE/1000000)); - - return usec; -} - -static irqreturn_t -iop321_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - u32 tisr; - - write_seqlock(&xtime_lock); - - asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr)); - tisr |= 1; - asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (tisr)); - - timer_tick(regs); - - write_sequnlock(&xtime_lock); - - return IRQ_HANDLED; -} - -static struct irqaction iop321_timer_irq = { - .name = "IOP321 Timer Tick", - .handler = iop321_timer_interrupt, - .flags = IRQF_DISABLED | IRQF_TIMER, -}; - -static void __init iop321_timer_init(void) -{ - u32 timer_ctl; - - setup_irq(IRQ_IOP321_TIMER0, &iop321_timer_irq); - - timer_ctl = IOP321_TMR_EN | IOP321_TMR_PRIVILEGED | IOP321_TMR_RELOAD | - IOP321_TMR_RATIO_1_1; - - asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (LATCH)); - - asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (timer_ctl)); -} - -struct sys_timer iop321_timer = { - .init = &iop321_timer_init, - .offset = iop321_gettimeoffset, -}; diff --git a/arch/arm/mach-iop3xx/iop331-irq.c b/arch/arm/mach-iop3xx/iop331-irq.c deleted file mode 100644 index cab11722ced..00000000000 --- a/arch/arm/mach-iop3xx/iop331-irq.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * linux/arch/arm/mach-iop3xx/iop331-irq.c - * - * Generic IOP331 IRQ handling functionality - * - * Author: Dave Jiang - * Copyright (C) 2003 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * - */ -#include -#include -#include - -#include -#include -#include - -#include - -static u32 iop331_mask0 = 0; -static u32 iop331_mask1 = 0; - -static inline void intctl_write0(u32 val) -{ - // INTCTL0 - asm volatile("mcr p6,0,%0,c0,c0,0"::"r" (val)); -} - -static inline void intctl_write1(u32 val) -{ - // INTCTL1 - asm volatile("mcr p6,0,%0,c1,c0,0"::"r" (val)); -} - -static inline void intstr_write0(u32 val) -{ - // INTSTR0 - asm volatile("mcr p6,0,%0,c2,c0,0"::"r" (val)); -} - -static inline void intstr_write1(u32 val) -{ - // INTSTR1 - asm volatile("mcr p6,0,%0,c3,c0,0"::"r" (val)); -} - -static void -iop331_irq_mask1 (unsigned int irq) -{ - iop331_mask0 &= ~(1 << (irq - IOP331_IRQ_OFS)); - intctl_write0(iop331_mask0); -} - -static void -iop331_irq_mask2 (unsigned int irq) -{ - iop331_mask1 &= ~(1 << (irq - IOP331_IRQ_OFS - 32)); - intctl_write1(iop331_mask1); -} - -static void -iop331_irq_unmask1(unsigned int irq) -{ - iop331_mask0 |= (1 << (irq - IOP331_IRQ_OFS)); - intctl_write0(iop331_mask0); -} - -static void -iop331_irq_unmask2(unsigned int irq) -{ - iop331_mask1 |= (1 << (irq - IOP331_IRQ_OFS - 32)); - intctl_write1(iop331_mask1); -} - -struct irq_chip iop331_irqchip1 = { - .name = "IOP-1", - .ack = iop331_irq_mask1, - .mask = iop331_irq_mask1, - .unmask = iop331_irq_unmask1, -}; - -struct irq_chip iop331_irqchip2 = { - .name = "IOP-2", - .ack = iop331_irq_mask2, - .mask = iop331_irq_mask2, - .unmask = iop331_irq_unmask2, -}; - -void __init iop331_init_irq(void) -{ - unsigned int i, tmp; - - /* Enable access to coprocessor 6 for dealing with IRQs. - * From RMK: - * Basically, the Intel documentation here is poor. It appears that - * you need to set the bit to be able to access the coprocessor from - * SVC mode. Whether that allows access from user space or not is - * unclear. - */ - asm volatile ( - "mrc p15, 0, %0, c15, c1, 0\n\t" - "orr %0, %0, %1\n\t" - "mcr p15, 0, %0, c15, c1, 0\n\t" - /* The action is delayed, so we have to do this: */ - "mrc p15, 0, %0, c15, c1, 0\n\t" - "mov %0, %0\n\t" - "sub pc, pc, #4" - : "=r" (tmp) : "i" (1 << 6) ); - - intctl_write0(0); // disable all interrupts - intctl_write1(0); - intstr_write0(0); // treat all as IRQ - intstr_write1(0); - if(machine_is_iq80331()) // all interrupts are inputs to chip - *IOP331_PCIIRSR = 0x0f; - - for(i = IOP331_IRQ_OFS; i < NR_IOP331_IRQS; i++) - { - set_irq_chip(i, (i < 32) ? &iop331_irqchip1 : &iop331_irqchip2); - set_irq_handler(i, do_level_IRQ); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } -} - diff --git a/arch/arm/mach-iop3xx/iop331-pci.c b/arch/arm/mach-iop3xx/iop331-pci.c deleted file mode 100644 index 44dd213b48a..00000000000 --- a/arch/arm/mach-iop3xx/iop331-pci.c +++ /dev/null @@ -1,222 +0,0 @@ -/* - * arch/arm/mach-iop3xx/iop331-pci.c - * - * PCI support for the Intel IOP331 chipset - * - * Author: Dave Jiang (dave.jiang@intel.com) - * Copyright (C) 2003, 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include - -#undef DEBUG -#undef DEBUG1 - -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) do { } while (0) -#endif - -#ifdef DEBUG1 -#define DBG1(x...) printk(x) -#else -#define DBG1(x...) do { } while (0) -#endif - -/* - * This routine builds either a type0 or type1 configuration command. If the - * bus is on the 80331 then a type0 made, else a type1 is created. - */ -static u32 iop331_cfg_address(struct pci_bus *bus, int devfn, int where) -{ - struct pci_sys_data *sys = bus->sysdata; - u32 addr; - - if (sys->busnr == bus->number) - addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11); - else - addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1; - - addr |= PCI_FUNC(devfn) << 8 | (where & ~3); - - return addr; -} - -/* - * This routine checks the status of the last configuration cycle. If an error - * was detected it returns a 1, else it returns a 0. The errors being checked - * are parity, master abort, target abort (master and target). These types of - * errors occure during a config cycle where there is no device, like during - * the discovery stage. - */ -static int iop331_pci_status(void) -{ - unsigned int status; - int ret = 0; - - /* - * Check the status registers. - */ - status = *IOP331_ATUSR; - if (status & 0xf900) - { - DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status); - *IOP331_ATUSR = status & 0xf900; - ret = 1; - } - status = *IOP331_ATUISR; - if (status & 0x679f) - { - DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status); - *IOP331_ATUISR = status & 0x679f; - ret = 1; - } - return ret; -} - -/* - * Simply write the address register and read the configuration - * data. Note that the 4 nop's ensure that we are able to handle - * a delayed abort (in theory.) - */ -static inline u32 iop331_read(unsigned long addr) -{ - u32 val; - - __asm__ __volatile__( - "str %1, [%2]\n\t" - "ldr %0, [%3]\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - : "=r" (val) - : "r" (addr), "r" (IOP331_OCCAR), "r" (IOP331_OCCDR)); - - return val; -} - -/* - * The read routines must check the error status of the last configuration - * cycle. If there was an error, the routine returns all hex f's. - */ -static int -iop331_read_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 *value) -{ - unsigned long addr = iop331_cfg_address(bus, devfn, where); - u32 val = iop331_read(addr) >> ((where & 3) * 8); - - if( iop331_pci_status() ) - val = 0xffffffff; - - *value = val; - - return PCIBIOS_SUCCESSFUL; -} - -static int -iop331_write_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 value) -{ - unsigned long addr = iop331_cfg_address(bus, devfn, where); - u32 val; - - if (size != 4) { - val = iop331_read(addr); - if (!iop331_pci_status() == 0) - return PCIBIOS_SUCCESSFUL; - - where = (where & 3) * 8; - - if (size == 1) - val &= ~(0xff << where); - else - val &= ~(0xffff << where); - - *IOP331_OCCDR = val | value << where; - } else { - asm volatile( - "str %1, [%2]\n\t" - "str %0, [%3]\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - : - : "r" (value), "r" (addr), - "r" (IOP331_OCCAR), "r" (IOP331_OCCDR)); - } - - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops iop331_ops = { - .read = iop331_read_config, - .write = iop331_write_config, -}; - -/* - * When a PCI device does not exist during config cycles, the XScale gets a - * bus error instead of returning 0xffffffff. This handler simply returns. - */ -int -iop331_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) -{ - DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n", - addr, fsr, regs->ARM_pc, regs->ARM_lr); - - /* - * If it was an imprecise abort, then we need to correct the - * return address to be _after_ the instruction. - */ - if (fsr & (1 << 10)) - regs->ARM_pc += 4; - - return 0; -} - -/* - * Scan an IOP331 PCI bus. sys->bus defines which bus we scan. - */ -struct pci_bus *iop331_scan_bus(int nr, struct pci_sys_data *sys) -{ - return pci_scan_bus(sys->busnr, &iop331_ops, sys); -} - -void iop331_init(void) -{ - DBG1("PCI: Intel 80331 PCI init code.\n"); - DBG1("\tATU: IOP331_ATUCMD=0x%04x\n", *IOP331_ATUCMD); - DBG1("\tATU: IOP331_OMWTVR0=0x%04x, IOP331_OIOWTVR=0x%04x\n", - *IOP331_OMWTVR0, - *IOP331_OIOWTVR); - DBG1("\tATU: IOP331_OMWTVR1=0x%04x\n", *IOP331_OMWTVR1); - DBG1("\tATU: IOP331_ATUCR=0x%08x\n", *IOP331_ATUCR); - DBG1("\tATU: IOP331_IABAR0=0x%08x IOP331_IALR0=0x%08x IOP331_IATVR0=%08x\n", *IOP331_IABAR0, *IOP331_IALR0, *IOP331_IATVR0); - DBG1("\tATU: IOP31_IABAR1=0x%08x IOP331_IALR1=0x%08x\n", *IOP331_IABAR1, *IOP331_IALR1); - DBG1("\tATU: IOP331_ERBAR=0x%08x IOP331_ERLR=0x%08x IOP331_ERTVR=%08x\n", *IOP331_ERBAR, *IOP331_ERLR, *IOP331_ERTVR); - DBG1("\tATU: IOP331_IABAR2=0x%08x IOP331_IALR2=0x%08x IOP331_IATVR2=%08x\n", *IOP331_IABAR2, *IOP331_IALR2, *IOP331_IATVR2); - DBG1("\tATU: IOP331_IABAR3=0x%08x IOP331_IALR3=0x%08x IOP331_IATVR3=%08x\n", *IOP331_IABAR3, *IOP331_IALR3, *IOP331_IATVR3); - - hook_fault_code(16+6, iop331_pci_abort, SIGBUS, "imprecise external abort"); -} - diff --git a/arch/arm/mach-iop3xx/iop331-setup.c b/arch/arm/mach-iop3xx/iop331-setup.c deleted file mode 100644 index b2f24931d14..00000000000 --- a/arch/arm/mach-iop3xx/iop331-setup.c +++ /dev/null @@ -1,221 +0,0 @@ -/* - * linux/arch/arm/mach-iop3xx/iop331-setup.c - * - * Author: Dave Jiang (dave.jiang@intel.com) - * Copyright (C) 2004 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define IOP331_UART_XTAL 33334000 - -/* - * Standard IO mapping for all IOP331 based systems - */ -static struct map_desc iop331_std_desc[] __initdata = { - { /* mem mapped registers */ - .virtual = IOP331_VIRT_MEM_BASE, - .pfn = __phys_to_pfn(IOP331_PHYS_MEM_BASE), - .length = 0x00002000, - .type = MT_DEVICE - }, { /* PCI IO space */ - .virtual = IOP331_PCI_LOWER_IO_VA, - .pfn = __phys_to_pfn(IOP331_PCI_LOWER_IO_PA), - .length = IOP331_PCI_IO_WINDOW_SIZE, - .type = MT_DEVICE - } -}; - -static struct resource iop33x_uart0_resources[] = { - [0] = { - .start = IOP331_UART0_PHYS, - .end = IOP331_UART0_PHYS + 0x3f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IOP331_UART0, - .end = IRQ_IOP331_UART0, - .flags = IORESOURCE_IRQ - } -}; - -static struct resource iop33x_uart1_resources[] = { - [0] = { - .start = IOP331_UART1_PHYS, - .end = IOP331_UART1_PHYS + 0x3f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IOP331_UART1, - .end = IRQ_IOP331_UART1, - .flags = IORESOURCE_IRQ - } -}; - -static struct plat_serial8250_port iop33x_uart0_data[] = { - { - .membase = (char*)(IOP331_UART0_VIRT), - .mapbase = (IOP331_UART0_PHYS), - .irq = IRQ_IOP331_UART0, - .uartclk = IOP331_UART_XTAL, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_SKIP_TEST, - }, - { }, -}; - -static struct plat_serial8250_port iop33x_uart1_data[] = { - { - .membase = (char*)(IOP331_UART1_VIRT), - .mapbase = (IOP331_UART1_PHYS), - .irq = IRQ_IOP331_UART1, - .uartclk = IOP331_UART_XTAL, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_SKIP_TEST, - }, - { }, -}; - -static struct platform_device iop33x_uart0 = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev.platform_data = iop33x_uart0_data, - .num_resources = 2, - .resource = iop33x_uart0_resources, -}; - -static struct platform_device iop33x_uart1 = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM1, - .dev.platform_data = iop33x_uart1_data, - .num_resources = 2, - .resource = iop33x_uart1_resources, -}; - -static struct resource iop33x_i2c_0_resources[] = { - [0] = { - .start = 0xfffff680, - .end = 0xfffff698, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IOP331_I2C_0, - .end = IRQ_IOP331_I2C_0, - .flags = IORESOURCE_IRQ - } -}; - -static struct resource iop33x_i2c_1_resources[] = { - [0] = { - .start = 0xfffff6a0, - .end = 0xfffff6b8, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IOP331_I2C_1, - .end = IRQ_IOP331_I2C_1, - .flags = IORESOURCE_IRQ - } -}; - -static struct platform_device iop33x_i2c_0_controller = { - .name = "IOP3xx-I2C", - .id = 0, - .num_resources = 2, - .resource = iop33x_i2c_0_resources -}; - -static struct platform_device iop33x_i2c_1_controller = { - .name = "IOP3xx-I2C", - .id = 1, - .num_resources = 2, - .resource = iop33x_i2c_1_resources -}; - -static struct platform_device *iop33x_devices[] __initdata = { - &iop33x_uart0, - &iop33x_uart1, - &iop33x_i2c_0_controller, - &iop33x_i2c_1_controller -}; - -void __init iop33x_init(void) -{ - if(iop_is_331()) - { - platform_add_devices(iop33x_devices, - ARRAY_SIZE(iop33x_devices)); - } -} - -void __init iop331_map_io(void) -{ - iotable_init(iop331_std_desc, ARRAY_SIZE(iop331_std_desc)); -} - -#ifdef CONFIG_ARCH_IOP33X -extern void iop331_init_irq(void); -extern struct sys_timer iop331_timer; -#endif - -#ifdef CONFIG_ARCH_IQ80331 -extern void iq80331_map_io(void); -#endif - -#ifdef CONFIG_MACH_IQ80332 -extern void iq80332_map_io(void); -#endif - -#if defined(CONFIG_ARCH_IQ80331) -MACHINE_START(IQ80331, "Intel IQ80331") - /* Maintainer: Intel Corp. */ - .phys_io = 0xfefff000, - .io_pg_offst = ((0xfffff000) >> 18) & 0xfffc, // virtual, physical - .map_io = iq80331_map_io, - .init_irq = iop331_init_irq, - .timer = &iop331_timer, - .boot_params = 0x0100, - .init_machine = iop33x_init, -MACHINE_END - -#elif defined(CONFIG_MACH_IQ80332) -MACHINE_START(IQ80332, "Intel IQ80332") - /* Maintainer: Intel Corp. */ - .phys_io = 0xfefff000, - .io_pg_offst = ((0xfffff000) >> 18) & 0xfffc, // virtual, physical - .map_io = iq80332_map_io, - .init_irq = iop331_init_irq, - .timer = &iop331_timer, - .boot_params = 0x0100, - .init_machine = iop33x_init, -MACHINE_END - -#else -#error No machine descriptor defined for this IOP3XX implementation -#endif - - diff --git a/arch/arm/mach-iop3xx/iop331-time.c b/arch/arm/mach-iop3xx/iop331-time.c deleted file mode 100644 index 0c09e74c574..00000000000 --- a/arch/arm/mach-iop3xx/iop331-time.c +++ /dev/null @@ -1,106 +0,0 @@ -/* - * arch/arm/mach-iop3xx/iop331-time.c - * - * Timer code for IOP331 based systems - * - * Author: Dave Jiang - * - * Copyright 2003 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -static inline unsigned long get_elapsed(void) -{ - return LATCH - *IOP331_TU_TCR0; -} - -static unsigned long iop331_gettimeoffset(void) -{ - unsigned long elapsed, usec; - u32 tisr1, tisr2; - - /* - * If an interrupt was pending before we read the timer, - * we've already wrapped. Factor this into the time. - * If an interrupt was pending after we read the timer, - * it may have wrapped between checking the interrupt - * status and reading the timer. Re-read the timer to - * be sure its value is after the wrap. - */ - - asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr1)); - elapsed = get_elapsed(); - asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr2)); - - if(tisr1 & 1) - elapsed += LATCH; - else if (tisr2 & 1) - elapsed = LATCH + get_elapsed(); - - /* - * Now convert them to usec. - */ - usec = (unsigned long)(elapsed / (CLOCK_TICK_RATE/1000000)); - - return usec; -} - -static irqreturn_t -iop331_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - u32 tisr; - - write_seqlock(&xtime_lock); - - asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr)); - tisr |= 1; - asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (tisr)); - - timer_tick(regs); - - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; -} - -static struct irqaction iop331_timer_irq = { - .name = "IOP331 Timer Tick", - .handler = iop331_timer_interrupt, - .flags = IRQF_DISABLED | IRQF_TIMER, -}; - -static void __init iop331_timer_init(void) -{ - u32 timer_ctl; - - setup_irq(IRQ_IOP331_TIMER0, &iop331_timer_irq); - - timer_ctl = IOP331_TMR_EN | IOP331_TMR_PRIVILEGED | IOP331_TMR_RELOAD | - IOP331_TMR_RATIO_1_1; - - asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (LATCH)); - - asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (timer_ctl)); - -} - -struct sys_timer iop331_timer = { - .init = iop331_timer_init, - .offset = iop331_gettimeoffset, -}; diff --git a/arch/arm/mach-iop3xx/iq31244-mm.c b/arch/arm/mach-iop3xx/iq31244-mm.c deleted file mode 100644 index e874b54eefe..00000000000 --- a/arch/arm/mach-iop3xx/iq31244-mm.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * linux/arch/arm/mach-iop3xx/mm.c - * - * Low level memory initialization for iq80321 platform - * - * Author: Rory Bolt - * Copyright (C) 2002 Rory Bolt - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include -#include - -#include -#include -#include - -#include - - -/* - * IQ80321 specific IO mappings - * - * We use RedBoot's setup for the onboard devices. - */ -static struct map_desc iq31244_io_desc[] __initdata = { - { /* on-board devices */ - .virtual = IQ31244_UART, - .pfn = __phys_to_pfn(IQ31244_UART), - .length = 0x00100000, - .type = MT_DEVICE - } -}; - -void __init iq31244_map_io(void) -{ - iop321_map_io(); - - iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc)); -} diff --git a/arch/arm/mach-iop3xx/iq31244-pci.c b/arch/arm/mach-iop3xx/iq31244-pci.c deleted file mode 100644 index f3c6413fa5b..00000000000 --- a/arch/arm/mach-iop3xx/iq31244-pci.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * arch/arm/mach-iop3xx/iq80321-pci.c - * - * PCI support for the Intel IQ80321 reference board - * - * Author: Rory Bolt - * Copyright (C) 2002 Rory Bolt - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* - * The following macro is used to lookup irqs in a standard table - * format for those systems that do not already have PCI - * interrupts properly routed. We assume 1 <= pin <= 4 - */ -#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \ -({ int _ctl_ = -1; \ - unsigned int _idsel = idsel - minid; \ - if (_idsel <= maxid) \ - _ctl_ = pci_irq_table[_idsel][pin-1]; \ - _ctl_; }) - -#define INTA IRQ_IQ31244_INTA -#define INTB IRQ_IQ31244_INTB -#define INTC IRQ_IQ31244_INTC -#define INTD IRQ_IQ31244_INTD - -#define INTE IRQ_IQ31244_I82546 - -static inline int __init -iq31244_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) -{ - static int pci_irq_table[][4] = { - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ -#ifdef CONFIG_ARCH_EP80219 - {INTB, INTB, INTB, INTB}, /* CFlash */ - {INTE, INTE, INTE, INTE}, /* 82551 Pro 100 */ - {INTD, INTD, INTD, INTD}, /* PCI-X Slot */ - {INTC, INTC, INTC, INTC}, /* SATA */ -#else - {INTB, INTB, INTB, INTB}, /* CFlash */ - {INTC, INTC, INTC, INTC}, /* SATA */ - {INTD, INTD, INTD, INTD}, /* PCI-X Slot */ - {INTE, INTE, INTE, INTE}, /* 82546 GigE */ -#endif // CONFIG_ARCH_EP80219 - }; - - BUG_ON(pin < 1 || pin > 4); - - return PCI_IRQ_TABLE_LOOKUP(0, 7); -} - -static int iq31244_setup(int nr, struct pci_sys_data *sys) -{ - struct resource *res; - - if(nr != 0) - return 0; - - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); - if (!res) - panic("PCI: unable to alloc resources"); - - res[0].start = IOP321_PCI_LOWER_IO_VA; - res[0].end = IOP321_PCI_UPPER_IO_VA; - res[0].name = "IQ31244 PCI I/O Space"; - res[0].flags = IORESOURCE_IO; - - res[1].start = IOP321_PCI_LOWER_MEM_PA; - res[1].end = IOP321_PCI_UPPER_MEM_PA; - res[1].name = "IQ31244 PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; - - request_resource(&ioport_resource, &res[0]); - request_resource(&iomem_resource, &res[1]); - - sys->mem_offset = IOP321_PCI_MEM_OFFSET; - sys->io_offset = IOP321_PCI_IO_OFFSET; - - sys->resource[0] = &res[0]; - sys->resource[1] = &res[1]; - sys->resource[2] = NULL; - - return 1; -} - -static void iq31244_preinit(void) -{ - iop321_init(); -} - -static struct hw_pci iq31244_pci __initdata = { - .swizzle = pci_std_swizzle, - .nr_controllers = 1, - .setup = iq31244_setup, - .scan = iop321_scan_bus, - .preinit = iq31244_preinit, - .map_irq = iq31244_map_irq -}; - -static int __init iq31244_pci_init(void) -{ - if (machine_is_iq31244()) - pci_common_init(&iq31244_pci); - return 0; -} - -subsys_initcall(iq31244_pci_init); - - - - diff --git a/arch/arm/mach-iop3xx/iq80321-mm.c b/arch/arm/mach-iop3xx/iq80321-mm.c deleted file mode 100644 index d9cac5e1fc3..00000000000 --- a/arch/arm/mach-iop3xx/iq80321-mm.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * linux/arch/arm/mach-iop3xx/mm.c - * - * Low level memory initialization for iq80321 platform - * - * Author: Rory Bolt - * Copyright (C) 2002 Rory Bolt - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include -#include - -#include -#include -#include - -#include - - -/* - * IQ80321 specific IO mappings - * - * We use RedBoot's setup for the onboard devices. - */ -static struct map_desc iq80321_io_desc[] __initdata = { - { /* on-board devices */ - .virtual = IQ80321_UART, - .pfn = __phys_to_pfn(IQ80321_UART), - .length = 0x00100000, - .type = MT_DEVICE - } -}; - -void __init iq80321_map_io(void) -{ - iop321_map_io(); - - iotable_init(iq80321_io_desc, ARRAY_SIZE(iq80321_io_desc)); -} diff --git a/arch/arm/mach-iop3xx/iq80321-pci.c b/arch/arm/mach-iop3xx/iq80321-pci.c deleted file mode 100644 index d9758d3f6e7..00000000000 --- a/arch/arm/mach-iop3xx/iq80321-pci.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * arch/arm/mach-iop3xx/iq80321-pci.c - * - * PCI support for the Intel IQ80321 reference board - * - * Author: Rory Bolt - * Copyright (C) 2002 Rory Bolt - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* - * The following macro is used to lookup irqs in a standard table - * format for those systems that do not already have PCI - * interrupts properly routed. We assume 1 <= pin <= 4 - */ -#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \ -({ int _ctl_ = -1; \ - unsigned int _idsel = idsel - minid; \ - if (_idsel <= maxid) \ - _ctl_ = pci_irq_table[_idsel][pin-1]; \ - _ctl_; }) - -#define INTA IRQ_IQ80321_INTA -#define INTB IRQ_IQ80321_INTB -#define INTC IRQ_IQ80321_INTC -#define INTD IRQ_IQ80321_INTD - -#define INTE IRQ_IQ80321_I82544 - -static inline int __init -iq80321_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) -{ - static int pci_irq_table[][4] = { - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - {INTE, INTE, INTE, INTE}, /* Gig-E */ - {-1, -1, -1, -1}, /* Unused */ - {INTC, INTD, INTA, INTB}, /* PCI-X Slot */ - {-1, -1, -1, -1}, - }; - - BUG_ON(pin < 1 || pin > 4); - -// return PCI_IRQ_TABLE_LOOKUP(4, 7); - return pci_irq_table[idsel%4][pin-1]; -} - -static int iq80321_setup(int nr, struct pci_sys_data *sys) -{ - struct resource *res; - - if(nr != 0) - return 0; - - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); - if (!res) - panic("PCI: unable to alloc resources"); - - res[0].start = IOP321_PCI_LOWER_IO_VA; - res[0].end = IOP321_PCI_UPPER_IO_VA; - res[0].name = "IQ80321 PCI I/O Space"; - res[0].flags = IORESOURCE_IO; - - res[1].start = IOP321_PCI_LOWER_MEM_PA; - res[1].end = IOP321_PCI_UPPER_MEM_PA; - res[1].name = "IQ80321 PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; - - request_resource(&ioport_resource, &res[0]); - request_resource(&iomem_resource, &res[1]); - - sys->mem_offset = IOP321_PCI_MEM_OFFSET; - sys->io_offset = IOP321_PCI_IO_OFFSET; - - sys->resource[0] = &res[0]; - sys->resource[1] = &res[1]; - sys->resource[2] = NULL; - - return 1; -} - -static void iq80321_preinit(void) -{ - iop321_init(); -} - -static struct hw_pci iq80321_pci __initdata = { - .swizzle = pci_std_swizzle, - .nr_controllers = 1, - .setup = iq80321_setup, - .scan = iop321_scan_bus, - .preinit = iq80321_preinit, - .map_irq = iq80321_map_irq -}; - -static int __init iq80321_pci_init(void) -{ - if (machine_is_iq80321()) - pci_common_init(&iq80321_pci); - return 0; -} - -subsys_initcall(iq80321_pci_init); - - - - diff --git a/arch/arm/mach-iop3xx/iq80331-mm.c b/arch/arm/mach-iop3xx/iq80331-mm.c deleted file mode 100644 index 129eb49b067..00000000000 --- a/arch/arm/mach-iop3xx/iq80331-mm.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * linux/arch/arm/mach-iop3xx/mm.c - * - * Low level memory initialization for iq80331 platform - * - * Author: Dave Jiang - * Copyright (C) 2003 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include -#include - -#include -#include -#include - -#include - - -/* - * IQ80331 specific IO mappings - * - * We use RedBoot's setup for the onboard devices. - */ - -void __init iq80331_map_io(void) -{ - iop331_map_io(); -} diff --git a/arch/arm/mach-iop3xx/iq80331-pci.c b/arch/arm/mach-iop3xx/iq80331-pci.c deleted file mode 100644 index 40d86100249..00000000000 --- a/arch/arm/mach-iop3xx/iq80331-pci.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * arch/arm/mach-iop3xx/iq80331-pci.c - * - * PCI support for the Intel IQ80331 reference board - * - * Author: Dave Jiang - * Copyright (C) 2003, 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* - * The following macro is used to lookup irqs in a standard table - * format for those systems that do not already have PCI - * interrupts properly routed. We assume 1 <= pin <= 4 - */ -#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \ -({ int _ctl_ = -1; \ - unsigned int _idsel = idsel - minid; \ - if (_idsel <= maxid) \ - _ctl_ = pci_irq_table[_idsel][pin-1]; \ - _ctl_; }) - -#define INTA IRQ_IQ80331_INTA -#define INTB IRQ_IQ80331_INTB -#define INTC IRQ_IQ80331_INTC -#define INTD IRQ_IQ80331_INTD - -//#define INTE IRQ_IQ80331_I82544 - -static inline int __init -iq80331_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) -{ - static int pci_irq_table[][4] = { - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - {INTB, INTC, INTD, INTA}, /* PCI-X Slot */ - {INTC, INTC, INTC, INTC}, /* GigE */ - }; - - BUG_ON(pin < 1 || pin > 4); - - return PCI_IRQ_TABLE_LOOKUP(1, 7); -} - -static int iq80331_setup(int nr, struct pci_sys_data *sys) -{ - struct resource *res; - - if(nr != 0) - return 0; - - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); - if (!res) - panic("PCI: unable to alloc resources"); - - res[0].start = IOP331_PCI_LOWER_IO_VA; - res[0].end = IOP331_PCI_UPPER_IO_VA; - res[0].name = "IQ80331 PCI I/O Space"; - res[0].flags = IORESOURCE_IO; - - res[1].start = IOP331_PCI_LOWER_MEM_PA; - res[1].end = IOP331_PCI_UPPER_MEM_PA; - res[1].name = "IQ80331 PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; - - request_resource(&ioport_resource, &res[0]); - request_resource(&iomem_resource, &res[1]); - - sys->mem_offset = IOP331_PCI_MEM_OFFSET; - sys->io_offset = IOP331_PCI_IO_OFFSET; - - sys->resource[0] = &res[0]; - sys->resource[1] = &res[1]; - sys->resource[2] = NULL; - - return 1; -} - -static void iq80331_preinit(void) -{ - iop331_init(); -} - -static struct hw_pci iq80331_pci __initdata = { - .swizzle = pci_std_swizzle, - .nr_controllers = 1, - .setup = iq80331_setup, - .scan = iop331_scan_bus, - .preinit = iq80331_preinit, - .map_irq = iq80331_map_irq -}; - -static int __init iq80331_pci_init(void) -{ - if (machine_is_iq80331()) - pci_common_init(&iq80331_pci); - return 0; -} - -subsys_initcall(iq80331_pci_init); - - - - diff --git a/arch/arm/mach-iop3xx/iq80332-mm.c b/arch/arm/mach-iop3xx/iq80332-mm.c deleted file mode 100644 index 2feaf7591f5..00000000000 --- a/arch/arm/mach-iop3xx/iq80332-mm.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * linux/arch/arm/mach-iop3xx/mm.c - * - * Low level memory initialization for iq80332 platform - * - * Author: Dave Jiang - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include -#include - -#include -#include -#include - -#include - - -/* - * IQ80332 specific IO mappings - * - * We use RedBoot's setup for the onboard devices. - */ - -void __init iq80332_map_io(void) -{ - iop331_map_io(); -} diff --git a/arch/arm/mach-iop3xx/iq80332-pci.c b/arch/arm/mach-iop3xx/iq80332-pci.c deleted file mode 100644 index afc0676318e..00000000000 --- a/arch/arm/mach-iop3xx/iq80332-pci.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * arch/arm/mach-iop3xx/iq80332-pci.c - * - * PCI support for the Intel IQ80332 reference board - * - * Author: Dave Jiang - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* - * The following macro is used to lookup irqs in a standard table - * format for those systems that do not already have PCI - * interrupts properly routed. We assume 1 <= pin <= 4 - */ -#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \ -({ int _ctl_ = -1; \ - unsigned int _idsel = idsel - minid; \ - if (_idsel <= maxid) \ - _ctl_ = pci_irq_table[_idsel][pin-1]; \ - _ctl_; }) - -#define INTA IRQ_IQ80332_INTA -#define INTB IRQ_IQ80332_INTB -#define INTC IRQ_IQ80332_INTC -#define INTD IRQ_IQ80332_INTD - -//#define INTE IRQ_IQ80332_I82544 - -static inline int __init -iq80332_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) -{ - static int pci_irq_table[][8] = { - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - {-1, -1, -1, -1}, - {-1, -1, -1, -1}, - {-1, -1, -1, -1}, - {INTA, INTB, INTC, INTD}, /* PCI-X Slot */ - {-1, -1, -1, -1}, - {INTC, INTC, INTC, INTC}, /* GigE */ - {-1, -1, -1, -1}, - {-1, -1, -1, -1}, - }; - - BUG_ON(pin < 1 || pin > 4); - - return PCI_IRQ_TABLE_LOOKUP(1, 7); -} - -static int iq80332_setup(int nr, struct pci_sys_data *sys) -{ - struct resource *res; - - if(nr != 0) - return 0; - - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); - if (!res) - panic("PCI: unable to alloc resources"); - - res[0].start = IOP331_PCI_LOWER_IO_VA; - res[0].end = IOP331_PCI_UPPER_IO_VA; - res[0].name = "IQ80332 PCI I/O Space"; - res[0].flags = IORESOURCE_IO; - - res[1].start = IOP331_PCI_LOWER_MEM_PA; - res[1].end = IOP331_PCI_UPPER_MEM_PA; - res[1].name = "IQ80332 PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; - - request_resource(&ioport_resource, &res[0]); - request_resource(&iomem_resource, &res[1]); - - sys->mem_offset = IOP331_PCI_MEM_OFFSET; - sys->io_offset = IOP331_PCI_IO_OFFSET; - - sys->resource[0] = &res[0]; - sys->resource[1] = &res[1]; - sys->resource[2] = NULL; - - return 1; -} - -static void iq80332_preinit(void) -{ - iop331_init(); -} - -static struct hw_pci iq80332_pci __initdata = { - .swizzle = pci_std_swizzle, - .nr_controllers = 1, - .setup = iq80332_setup, - .scan = iop331_scan_bus, - .preinit = iq80332_preinit, - .map_irq = iq80332_map_irq -}; - -static int __init iq80332_pci_init(void) -{ - if (machine_is_iq80332()) - pci_common_init(&iq80332_pci); - return 0; -} - -subsys_initcall(iq80332_pci_init); - - - - diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index b4f220dd5eb..b59c74100a8 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -232,7 +232,7 @@ config CPU_SA1100 # XScale config CPU_XSCALE bool - depends on ARCH_IOP3XX || ARCH_PXA || ARCH_IXP4XX || ARCH_IXP2000 + depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_PXA || ARCH_IXP4XX || ARCH_IXP2000 default y select CPU_32v5 select CPU_ABRT_EV5T -- cgit v1.2.3