From 7a302a9674593259866de4a9d5ae8edc03dc1934 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 14 May 2007 12:50:43 +0900
Subject: sh: Split out CPU topology initialization.

Split out the CPU topology initialization to a separate file,
and switch it to a percpu type, rather than an NR_CPUS array.

At the same time, switch to only registering present CPUs,
rather than using the possible CPU map.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/Makefile   |  9 ++++-----
 arch/sh/kernel/setup.c    | 15 +--------------
 arch/sh/kernel/topology.c | 21 +++++++++++++++++++++
 3 files changed, 26 insertions(+), 19 deletions(-)
 create mode 100644 arch/sh/kernel/topology.c

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index 9104b625764..fb623e5d185 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -4,10 +4,9 @@
 
 extra-y	:= head.o init_task.o vmlinux.lds
 
-obj-y	:= process.o signal.o traps.o irq.o \
-	ptrace.o setup.o time.o sys_sh.o semaphore.o \
-	io.o io_generic.o sh_ksyms.o syscalls.o \
-	debugtraps.o
+obj-y	:= debugtraps.o io.o io_generic.o irq.o process.o ptrace.o \
+	   semaphore.o setup.o signal.o sys_sh.o syscalls.o \
+	   time.o topology.o traps.o
 
 obj-y				+= cpu/ timers/
 obj-$(CONFIG_VSYSCALL)		+= vsyscall/
@@ -17,7 +16,7 @@ obj-$(CONFIG_CF_ENABLER)	+= cf-enabler.o
 obj-$(CONFIG_SH_STANDARD_BIOS)	+= sh_bios.o
 obj-$(CONFIG_SH_KGDB)		+= kgdb_stub.o kgdb_jmp.o
 obj-$(CONFIG_SH_CPU_FREQ)	+= cpufreq.o
-obj-$(CONFIG_MODULES)		+= module.o
+obj-$(CONFIG_MODULES)		+= sh_ksyms.o module.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index c2772913593..61152b43832 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -23,6 +23,7 @@
 #include <linux/kexec.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
+#include <asm/page.h>
 #include <asm/sections.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
@@ -389,20 +390,6 @@ struct sh_machine_vector* __init get_mv_byname(const char* name)
 	return NULL;
 }
 
-static struct cpu cpu[NR_CPUS];
-
-static int __init topology_init(void)
-{
-	int cpu_id;
-
-	for_each_possible_cpu(cpu_id)
-		register_cpu(&cpu[cpu_id], cpu_id);
-
-	return 0;
-}
-
-subsys_initcall(topology_init);
-
 static const char *cpu_name[] = {
 	[CPU_SH7206]	= "SH7206",	[CPU_SH7619]	= "SH7619",
 	[CPU_SH7604]	= "SH7604",	[CPU_SH7300]	= "SH7300",
diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c
new file mode 100644
index 00000000000..8a4664c0ab5
--- /dev/null
+++ b/arch/sh/kernel/topology.c
@@ -0,0 +1,21 @@
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/init.h>
+#include <linux/percpu.h>
+
+static DEFINE_PER_CPU(struct cpu, cpu_devices);
+
+static int __init topology_init(void)
+{
+	int i, ret;
+
+	for_each_present_cpu(i) {
+		ret = register_cpu(&per_cpu(cpu_devices, i), i);
+		if (unlikely(ret))
+			printk(KERN_WARNING "%s: register_cpu %d failed (%d)\n",
+			       __FUNCTION__, i, ret);
+	}
+
+	return 0;
+}
+subsys_initcall(topology_init);
-- 
cgit v1.2.3


From e08f457c7c0cc7720f28349f8780ea752c063441 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 14 May 2007 12:52:56 +0900
Subject: sh: __user annotations for __get/__put_user().

This adds in some more __user annotations. These weren't being
handled properly in some of the __get_user and __put_user paths,
so tidy those up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/process.c | 12 +++++-------
 arch/sh/kernel/ptrace.c  |  8 ++++----
 arch/sh/kernel/signal.c  |  4 ++--
 arch/sh/kernel/traps.c   |  2 +-
 4 files changed, 12 insertions(+), 14 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c
index a11e2aa73cb..aa9c8112140 100644
--- a/arch/sh/kernel/process.c
+++ b/arch/sh/kernel/process.c
@@ -17,6 +17,7 @@
 #include <linux/kexec.h>
 #include <linux/kdebug.h>
 #include <linux/tick.h>
+#include <linux/reboot.h>
 #include <asm/uaccess.h>
 #include <asm/mmu_context.h>
 #include <asm/pgalloc.h>
@@ -449,23 +450,20 @@ asmlinkage int sys_vfork(unsigned long r4, unsigned long r5,
 /*
  * sys_execve() executes a new program.
  */
-asmlinkage int sys_execve(char *ufilename, char **uargv,
-			  char **uenvp, unsigned long r7,
+asmlinkage int sys_execve(char __user *ufilename, char __user * __user *uargv,
+			  char __user * __user *uenvp, unsigned long r7,
 			  struct pt_regs __regs)
 {
 	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
 	int error;
 	char *filename;
 
-	filename = getname((char __user *)ufilename);
+	filename = getname(ufilename);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		goto out;
 
-	error = do_execve(filename,
-			  (char __user * __user *)uargv,
-			  (char __user * __user *)uenvp,
-			  regs);
+	error = do_execve(filename, uargv, uenvp, regs);
 	if (error == 0) {
 		task_lock(current);
 		current->ptrace &= ~PT_DTRACE;
diff --git a/arch/sh/kernel/ptrace.c b/arch/sh/kernel/ptrace.c
index 3fb5fc0b550..f2eaa485d04 100644
--- a/arch/sh/kernel/ptrace.c
+++ b/arch/sh/kernel/ptrace.c
@@ -99,7 +99,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		ret = -EIO;
 		if (copied != sizeof(tmp))
 			break;
-		ret = put_user(tmp,(unsigned long *) data);
+		ret = put_user(tmp,(unsigned long __user *) data);
 		break;
 	}
 
@@ -128,7 +128,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			tmp = !!tsk_used_math(child);
 		else
 			tmp = 0;
-		ret = put_user(tmp, (unsigned long *)data);
+		ret = put_user(tmp, (unsigned long __user *)data);
 		break;
 	}
 
@@ -196,7 +196,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 
 	case PTRACE_SINGLESTEP: {  /* set the trap flag. */
 		long pc;
-		struct pt_regs *dummy = NULL;
+		struct pt_regs *regs = NULL;
 
 		ret = -EIO;
 		if (!valid_signal(data))
@@ -207,7 +207,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			child->ptrace |= PT_DTRACE;
 		}
 
-		pc = get_stack_long(child, (long)&dummy->pc);
+		pc = get_stack_long(child, (long)&regs->pc);
 
 		/* Next scheduling will set up UBC */
 		if (child->thread.ubc_pc == 0)
diff --git a/arch/sh/kernel/signal.c b/arch/sh/kernel/signal.c
index b32c35a7c0a..4fc5b402b21 100644
--- a/arch/sh/kernel/signal.c
+++ b/arch/sh/kernel/signal.c
@@ -261,14 +261,14 @@ asmlinkage int sys_rt_sigreturn(unsigned long r4, unsigned long r5,
 		goto badframe;
 	/* It is more difficult to avoid calling this function than to
 	   call it and ignore errors.  */
-	do_sigaltstack(&st, NULL, regs->regs[15]);
+	do_sigaltstack((const stack_t __user *)&st, NULL, (unsigned long)frame);
 
 	return r0;
 
 badframe:
 	force_sig(SIGSEGV, current);
 	return 0;
-}	
+}
 
 /*
  * Set up a signal frame.
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
index 5b75cb6f8f9..299b8cf0f51 100644
--- a/arch/sh/kernel/traps.c
+++ b/arch/sh/kernel/traps.c
@@ -581,7 +581,7 @@ uspace_segv:
 		info.si_signo = SIGBUS;
 		info.si_errno = 0;
 		info.si_code = si_code;
-		info.si_addr = (void *) address;
+		info.si_addr = (void __user *)address;
 		force_sig_info(SIGBUS, &info, current);
 	} else {
 		if (regs->pc & 1)
-- 
cgit v1.2.3


From 9655ad03af2d232c3b26e7562ab4f8c29b107e49 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 14 May 2007 15:59:09 +0900
Subject: sh: Fixup machvec support.

This fixes up much of the machvec handling, allowing for it to be
overloaded on boot. Making practical use of this still requires
some Kconfig munging, however.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/Makefile      |   2 +-
 arch/sh/kernel/machvec.c     | 105 ++++++++++++++++++++++++++++
 arch/sh/kernel/setup.c       | 162 ++++---------------------------------------
 arch/sh/kernel/vmlinux.lds.S |   3 +-
 4 files changed, 122 insertions(+), 150 deletions(-)
 create mode 100644 arch/sh/kernel/machvec.c

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index fb623e5d185..1f141a8ba17 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -4,7 +4,7 @@
 
 extra-y	:= head.o init_task.o vmlinux.lds
 
-obj-y	:= debugtraps.o io.o io_generic.o irq.o process.o ptrace.o \
+obj-y	:= debugtraps.o io.o io_generic.o irq.o machvec.o process.o ptrace.o \
 	   semaphore.o setup.o signal.o sys_sh.o syscalls.o \
 	   time.o topology.o traps.o
 
diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c
new file mode 100644
index 00000000000..1e78191154e
--- /dev/null
+++ b/arch/sh/kernel/machvec.c
@@ -0,0 +1,105 @@
+/*
+ * arch/sh/kernel/machvec.c
+ *
+ * The SuperH machine vector setup handlers, yanked from setup.c
+ *
+ *  Copyright (C) 1999  Niibe Yutaka
+ *  Copyright (C) 2002 - 2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/string.h>
+#include <asm/machvec.h>
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#define MV_NAME_SIZE 32
+
+#define for_each_mv(mv) \
+	for ((mv) = (struct sh_machine_vector *)&__machvec_start; \
+	     (mv) && (unsigned long)(mv) < (unsigned long)&__machvec_end; \
+	     (mv)++)
+
+static struct sh_machine_vector * __init get_mv_byname(const char *name)
+{
+	struct sh_machine_vector *mv;
+
+	for_each_mv(mv)
+		if (strcasecmp(name, get_system_type()) == 0)
+			return mv;
+
+	return NULL;
+}
+
+static int __init early_parse_mv(char *from)
+{
+	char mv_name[MV_NAME_SIZE] = "";
+	char *mv_end;
+	char *mv_comma;
+	int mv_len;
+	struct sh_machine_vector *mvp;
+
+	mv_end = strchr(from, ' ');
+	if (mv_end == NULL)
+		mv_end = from + strlen(from);
+
+	mv_comma = strchr(from, ',');
+	mv_len = mv_end - from;
+	if (mv_len > (MV_NAME_SIZE-1))
+		mv_len = MV_NAME_SIZE-1;
+	memcpy(mv_name, from, mv_len);
+	mv_name[mv_len] = '\0';
+	from = mv_end;
+
+	if (strcmp(sh_mv.mv_name, mv_name) != 0) {
+		mvp = get_mv_byname(mv_name);
+		if (unlikely(!mvp)) {
+			printk("Available vectors:\n\n\t");
+			for_each_mv(mvp)
+				printk("'%s', ", mvp->mv_name);
+			printk("\n\n");
+			panic("Failed to select machvec '%s' -- halting.\n",
+			      mv_name);
+		} else
+			sh_mv = *mvp;
+	}
+
+	printk(KERN_NOTICE "Booting machvec: %s\n", sh_mv.mv_name);
+	return 0;
+}
+early_param("sh_mv", early_parse_mv);
+
+void __init sh_mv_setup(void)
+{
+	/*
+	 * Manually walk the vec, fill in anything that the board hasn't yet
+	 * by hand, wrapping to the generic implementation.
+	 */
+#define mv_set(elem) do { \
+	if (!sh_mv.mv_##elem) \
+		sh_mv.mv_##elem = generic_##elem; \
+} while (0)
+
+	mv_set(inb);	mv_set(inw);	mv_set(inl);
+	mv_set(outb);	mv_set(outw);	mv_set(outl);
+
+	mv_set(inb_p);	mv_set(inw_p);	mv_set(inl_p);
+	mv_set(outb_p);	mv_set(outw_p);	mv_set(outl_p);
+
+	mv_set(insb);	mv_set(insw);	mv_set(insl);
+	mv_set(outsb);	mv_set(outsw);	mv_set(outsl);
+
+	mv_set(readb);	mv_set(readw);	mv_set(readl);
+	mv_set(writeb);	mv_set(writew);	mv_set(writel);
+
+	mv_set(ioport_map);
+	mv_set(ioport_unmap);
+	mv_set(irq_demux);
+
+	if (!sh_mv.mv_nr_irqs)
+		sh_mv.mv_nr_irqs = NR_IRQS;
+}
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 61152b43832..0ad71583399 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -46,16 +46,8 @@ struct sh_cpuinfo boot_cpu_data = { CPU_SH_NONE, 10000000, };
 struct screen_info screen_info;
 #endif
 
-#if defined(CONFIG_SH_UNKNOWN)
-struct sh_machine_vector sh_mv;
-#endif
-
 extern int root_mountflags;
 
-#define MV_NAME_SIZE 32
-
-static struct sh_machine_vector* __init get_mv_byname(const char* name);
-
 /*
  * This is set up by the setup-routine at boot-time
  */
@@ -81,131 +73,17 @@ static struct resource data_resource = { .name = "Kernel data", };
 
 unsigned long memory_start, memory_end;
 
-static inline void parse_cmdline (char ** cmdline_p, char mv_name[MV_NAME_SIZE],
-				  struct sh_machine_vector** mvp,
-				  unsigned long *mv_io_base)
+static int __init early_parse_mem(char *p)
 {
-	char c = ' ', *to = command_line, *from = COMMAND_LINE;
-	int len = 0;
-
-	/* Save unparsed command line copy for /proc/cmdline */
-	memcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
-	boot_command_line[COMMAND_LINE_SIZE-1] = '\0';
+	unsigned long size;
 
 	memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START;
-	memory_end = memory_start + __MEMORY_SIZE;
-
-	for (;;) {
-		/*
-		 * "mem=XXX[kKmM]" defines a size of memory.
-		 */
-		if (c == ' ' && !memcmp(from, "mem=", 4)) {
-			if (to != command_line)
-				to--;
-			{
-				unsigned long mem_size;
-
-				mem_size = memparse(from+4, &from);
-				memory_end = memory_start + mem_size;
-			}
-		}
-
-		if (c == ' ' && !memcmp(from, "sh_mv=", 6)) {
-			char* mv_end;
-			char* mv_comma;
-			int mv_len;
-			if (to != command_line)
-				to--;
-			from += 6;
-			mv_end = strchr(from, ' ');
-			if (mv_end == NULL)
-				mv_end = from + strlen(from);
-
-			mv_comma = strchr(from, ',');
-			if ((mv_comma != NULL) && (mv_comma < mv_end)) {
-				int ints[3];
-				get_options(mv_comma+1, ARRAY_SIZE(ints), ints);
-				*mv_io_base = ints[1];
-				mv_len = mv_comma - from;
-			} else {
-				mv_len = mv_end - from;
-			}
-			if (mv_len > (MV_NAME_SIZE-1))
-				mv_len = MV_NAME_SIZE-1;
-			memcpy(mv_name, from, mv_len);
-			mv_name[mv_len] = '\0';
-			from = mv_end;
-
-			*mvp = get_mv_byname(mv_name);
-		}
-
-		c = *(from++);
-		if (!c)
-			break;
-		if (COMMAND_LINE_SIZE <= ++len)
-			break;
-		*(to++) = c;
-	}
-	*to = '\0';
-	*cmdline_p = command_line;
-}
-
-static int __init sh_mv_setup(char **cmdline_p)
-{
-#ifdef CONFIG_SH_UNKNOWN
-	extern struct sh_machine_vector mv_unknown;
-#endif
-	struct sh_machine_vector *mv = NULL;
-	char mv_name[MV_NAME_SIZE] = "";
-	unsigned long mv_io_base = 0;
-
-	parse_cmdline(cmdline_p, mv_name, &mv, &mv_io_base);
-
-#ifdef CONFIG_SH_UNKNOWN
-	if (mv == NULL) {
-		mv = &mv_unknown;
-		if (*mv_name != '\0') {
-			printk("Warning: Unsupported machine %s, using unknown\n",
-			       mv_name);
-		}
-	}
-	sh_mv = *mv;
-#endif
-
-	/*
-	 * Manually walk the vec, fill in anything that the board hasn't yet
-	 * by hand, wrapping to the generic implementation.
-	 */
-#define mv_set(elem) do { \
-	if (!sh_mv.mv_##elem) \
-		sh_mv.mv_##elem = generic_##elem; \
-} while (0)
-
-	mv_set(inb);	mv_set(inw);	mv_set(inl);
-	mv_set(outb);	mv_set(outw);	mv_set(outl);
-
-	mv_set(inb_p);	mv_set(inw_p);	mv_set(inl_p);
-	mv_set(outb_p);	mv_set(outw_p);	mv_set(outl_p);
-
-	mv_set(insb);	mv_set(insw);	mv_set(insl);
-	mv_set(outsb);	mv_set(outsw);	mv_set(outsl);
-
-	mv_set(readb);	mv_set(readw);	mv_set(readl);
-	mv_set(writeb);	mv_set(writew);	mv_set(writel);
-
-	mv_set(ioport_map);
-	mv_set(ioport_unmap);
-	mv_set(irq_demux);
-
-#ifdef CONFIG_SH_UNKNOWN
-	__set_io_port_base(mv_io_base);
-#endif
-
-	if (!sh_mv.mv_nr_irqs)
-		sh_mv.mv_nr_irqs = NR_IRQS;
+	size = memparse(p, &p);
+	memory_end = memory_start + size;
 
 	return 0;
 }
+early_param("mem", early_parse_mem);
 
 /*
  * Register fully available low RAM pages with the bootmem allocator.
@@ -340,9 +218,17 @@ void __init setup_arch(char **cmdline_p)
 	data_resource.start = virt_to_phys(_etext);
 	data_resource.end = virt_to_phys(_edata)-1;
 
+	memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START;
+	memory_end = memory_start + __MEMORY_SIZE;
+
+	/* Save unparsed command line copy for /proc/cmdline */
+	strlcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
+
+	*cmdline_p = command_line;
+
 	parse_early_param();
 
-	sh_mv_setup(cmdline_p);
+	sh_mv_setup();
 
 	/*
 	 * Find the highest page frame number we have available
@@ -369,26 +255,6 @@ void __init setup_arch(char **cmdline_p)
 		sh_mv.mv_setup(cmdline_p);
 }
 
-struct sh_machine_vector* __init get_mv_byname(const char* name)
-{
-	extern long __machvec_start, __machvec_end;
-	struct sh_machine_vector *all_vecs =
-		(struct sh_machine_vector *)&__machvec_start;
-
-	int i, n = ((unsigned long)&__machvec_end
-		    - (unsigned long)&__machvec_start)/
-		sizeof(struct sh_machine_vector);
-
-	for (i = 0; i < n; ++i) {
-		struct sh_machine_vector *mv = &all_vecs[i];
-		if (mv == NULL)
-			continue;
-		if (strcasecmp(name, get_system_type()) == 0) {
-			return mv;
-		}
-	}
-	return NULL;
-}
 
 static const char *cpu_name[] = {
 	[CPU_SH7206]	= "SH7206",	[CPU_SH7619]	= "SH7619",
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index 4c5b57e9c3c..f437a4f06da 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -98,8 +98,9 @@ SECTIONS
 #endif
 
   __machvec_start = .;
-  .init.machvec : { *(.init.machvec) }
+  .machvec.init : { *(.machvec.init) }
   __machvec_end = .;
+
   . = ALIGN(PAGE_SIZE);
   __init_end = .;
 
-- 
cgit v1.2.3


From 882c12c4e1a95e55227f06dbb99eca90f237c018 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 14 May 2007 17:26:34 +0900
Subject: sh: Shut up SH2-DSP compile warnings.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/process.c | 2 +-
 arch/sh/kernel/traps.c   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c
index aa9c8112140..9ae3da00eaa 100644
--- a/arch/sh/kernel/process.c
+++ b/arch/sh/kernel/process.c
@@ -406,8 +406,8 @@ asmlinkage int sys_fork(unsigned long r4, unsigned long r5,
 			unsigned long r6, unsigned long r7,
 			struct pt_regs __regs)
 {
-	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
 #ifdef CONFIG_MMU
+	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
 	return do_fork(SIGCHLD, regs->regs[15], regs, 0, NULL, NULL);
 #else
 	/* fork almost works, enough to trick you into looking elsewhere :-( */
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
index 299b8cf0f51..9c7fb922dfe 100644
--- a/arch/sh/kernel/traps.c
+++ b/arch/sh/kernel/traps.c
@@ -614,7 +614,7 @@ uspace_segv:
  */
 int is_dsp_inst(struct pt_regs *regs)
 {
-	unsigned short inst;
+	unsigned short inst = 0;
 
 	/*
 	 * Safe guard if DSP mode is already enabled or we're lacking
-- 
cgit v1.2.3


From f3d2229852697062d530f19742f0ab792b92873d Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 14 May 2007 17:29:12 +0900
Subject: sh: Rework CPU/board dependencies.

This was a big mess, rework the logic a bit so that we constrain
to a particular subtype and figure out the board support based
on that. This makes building subtype specific kernels supporting
multiple boards possible again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig                        | 296 +++++++++++++++++----------------
 arch/sh/boards/renesas/r7780rp/Kconfig |   6 +-
 arch/sh/mm/Kconfig                     |  21 +--
 3 files changed, 165 insertions(+), 158 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 038179ecf6a..4c9d8fc59fe 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -81,24 +81,146 @@ source "init/Kconfig"
 
 menu "System type"
 
-config SOLUTION_ENGINE
-	bool
+source "arch/sh/mm/Kconfig"
+
+menu "Processor features"
 
 choice
-	prompt "SuperH system type"
-	default SH_UNKNOWN
+	prompt "Endianess selection" 
+	default CPU_LITTLE_ENDIAN
+	help
+	  Some SuperH machines can be configured for either little or big
+	  endian byte order. These modes require different kernels.
+
+config CPU_LITTLE_ENDIAN
+	bool "Little Endian"
+
+config CPU_BIG_ENDIAN
+	bool "Big Endian"
+
+endchoice
+
+config SH_FPU
+	bool "FPU support"
+	depends on !CPU_SH3
+	default y
+	help
+	  Selecting this option will enable support for SH processors that
+	  have FPU units (ie, SH77xx).
+
+	  This option must be set in order to enable the FPU.
+
+config SH_FPU_EMU
+	bool "FPU emulation support"
+	depends on !SH_FPU && EXPERIMENTAL
+	default n
+	help
+	  Selecting this option will enable support for software FPU emulation.
+	  Most SH-3 users will want to say Y here, whereas most SH-4 users will
+	  want to say N.
+
+config SH_DSP
+	bool "DSP support"
+	default y if SH4AL_DSP || !CPU_SH4
+	default n
+	help
+	  Selecting this option will enable support for SH processors that
+	  have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP).
+
+	  This option must be set in order to enable the DSP.
+
+config SH_ADC
+	bool "ADC support"
+	depends on CPU_SH3
+	default y
+	help
+	  Selecting this option will allow the Linux kernel to use SH3 on-chip
+	  ADC module.
+
+	  If unsure, say N.
+
+config SH_STORE_QUEUES
+	bool "Support for Store Queues"
+	depends on CPU_SH4
+	help
+	  Selecting this option will enable an in-kernel API for manipulating
+	  the store queues integrated in the SH-4 processors.
+
+config SPECULATIVE_EXECUTION
+	bool "Speculative subroutine return"
+	depends on CPU_SUBTYPE_SH7780 && EXPERIMENTAL
+	help
+	  This enables support for a speculative instruction fetch for
+	  subroutine return. There are various pitfalls associated with
+	  this, as outlined in the SH7780 hardware manual.
+
+	  If unsure, say N.
+
+config CPU_HAS_INTEVT
+	bool
+
+config CPU_HAS_PINT_IRQ
+	bool
+
+config CPU_HAS_MASKREG_IRQ
+	bool
+
+config CPU_HAS_INTC2_IRQ
+	bool
+
+config CPU_HAS_IPR_IRQ
+	bool
+
+config CPU_HAS_SR_RB
+	bool "CPU has SR.RB"
+	depends on CPU_SH3 || CPU_SH4
+	default y
+	help
+	  This will enable the use of SR.RB register bank usage. Processors
+	  that are lacking this bit must have another method in place for
+	  accomplishing what is taken care of by the banked registers.
+
+	  See <file:Documentation/sh/register-banks.txt> for further
+	  information on SR.RB and register banking in the kernel in general.
+
+config CPU_HAS_PTEA
+	bool
+
+endmenu
+
+menu "Board support"
+
+config SOLUTION_ENGINE
+	bool
 
 config SH_SOLUTION_ENGINE
 	bool "SolutionEngine"
 	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7750
 	help
 	  Select SolutionEngine if configuring for a Hitachi SH7709
 	  or SH7750 evaluation board.
 
+config SH_7206_SOLUTION_ENGINE
+	bool "SolutionEngine7206"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7206
+	help
+	  Select 7206 SolutionEngine if configuring for a Hitachi SH7206
+	  evaluation board.
+
+config SH_7619_SOLUTION_ENGINE
+	bool "SolutionEngine7619"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7619
+	help
+	  Select 7619 SolutionEngine if configuring for a Hitachi SH7619
+	  evaluation board.
+	
 config SH_7722_SOLUTION_ENGINE
 	bool "SolutionEngine7722"
 	select SOLUTION_ENGINE
-	select CPU_SUBTYPE_SH7722
+	depends on CPU_SUBTYPE_SH7722
 	help
 	  Select 7722 SolutionEngine if configuring for a Hitachi SH772
 	  evaluation board.
@@ -106,7 +228,7 @@ config SH_7722_SOLUTION_ENGINE
 config SH_7751_SOLUTION_ENGINE
 	bool "SolutionEngine7751"
 	select SOLUTION_ENGINE
-	select CPU_SUBTYPE_SH7751
+	depends on CPU_SUBTYPE_SH7751
 	help
 	  Select 7751 SolutionEngine if configuring for a Hitachi SH7751
 	  evaluation board.
@@ -114,7 +236,7 @@ config SH_7751_SOLUTION_ENGINE
 config SH_7780_SOLUTION_ENGINE
 	bool "SolutionEngine7780"
 	select SOLUTION_ENGINE
-	select CPU_SUBTYPE_SH7780
+	depends on CPU_SUBTYPE_SH7780
 	help
 	  Select 7780 SolutionEngine if configuring for a Renesas SH7780
 	  evaluation board.
@@ -122,7 +244,7 @@ config SH_7780_SOLUTION_ENGINE
 config SH_7300_SOLUTION_ENGINE
 	bool "SolutionEngine7300"
 	select SOLUTION_ENGINE
-	select CPU_SUBTYPE_SH7300
+	depends on CPU_SUBTYPE_SH7300
 	help
 	  Select 7300 SolutionEngine if configuring for a Hitachi
 	  SH7300(SH-Mobile V) evaluation board.
@@ -130,22 +252,22 @@ config SH_7300_SOLUTION_ENGINE
 config SH_7343_SOLUTION_ENGINE
 	bool "SolutionEngine7343"
 	select SOLUTION_ENGINE
-	select CPU_SUBTYPE_SH7343
+	depends on CPU_SUBTYPE_SH7343
 	help
 	  Select 7343 SolutionEngine if configuring for a Hitachi
 	  SH7343 (SH-Mobile 3AS) evaluation board.
 
 config SH_73180_SOLUTION_ENGINE
-       bool "SolutionEngine73180"
+	bool "SolutionEngine73180"
 	select SOLUTION_ENGINE
-	select CPU_SUBTYPE_SH73180
+	depends on CPU_SUBTYPE_SH73180
 	help
 	  Select 73180 SolutionEngine if configuring for a Hitachi
 	  SH73180(SH-Mobile 3) evaluation board.
 
 config SH_7751_SYSTEMH
 	bool "SystemH7751R"
-	select CPU_SUBTYPE_SH7751R
+	depends on CPU_SUBTYPE_SH7751R
 	help
 	  Select SystemH if you are configuring for a Renesas SystemH
 	  7751R evaluation board.
@@ -153,6 +275,7 @@ config SH_7751_SYSTEMH
 config SH_HP6XX
 	bool "HP6XX"
 	select SYS_SUPPORTS_APM_EMULATION
+	depends on CPU_SUBTYPE_SH7709
 	help
 	  Select HP6XX if configuring for a HP jornada HP6xx.
 	  More information (hardware only) at
@@ -160,13 +283,13 @@ config SH_HP6XX
 
 config SH_SATURN
 	bool "Saturn"
-	select CPU_SUBTYPE_SH7604
+	depends on CPU_SUBTYPE_SH7604
 	help
 	  Select Saturn if configuring for a SEGA Saturn.
 
 config SH_DREAMCAST
 	bool "Dreamcast"
-	select CPU_SUBTYPE_SH7091
+	depends on CPU_SUBTYPE_SH7091
 	help
 	  Select Dreamcast if configuring for a SEGA Dreamcast.
 	  More information at
@@ -175,6 +298,7 @@ config SH_DREAMCAST
 
 config SH_MPC1211
 	bool "Interface MPC1211"
+	depends on CPU_SUBTYPE_SH7751 && BROKEN
 	help
 	  CTP/PCI-SH02 is a CPU module computer that is produced
 	  by Interface Corporation.
@@ -182,6 +306,7 @@ config SH_MPC1211
 
 config SH_SH03
 	bool "Interface CTP/PCI-SH03"
+	depends on CPU_SUBTYPE_SH7751 && BROKEN
 	help
 	  CTP/PCI-SH03 is a CPU module computer that is produced
 	  by Interface Corporation.
@@ -189,7 +314,7 @@ config SH_SH03
 
 config SH_SECUREEDGE5410
 	bool "SecureEdge5410"
-	select CPU_SUBTYPE_SH7751R
+	depends on CPU_SUBTYPE_SH7751R
 	help
 	  Select SecureEdge5410 if configuring for a SnapGear SH board.
 	  This includes both the OEM SecureEdge products as well as the
@@ -197,75 +322,62 @@ config SH_SECUREEDGE5410
 
 config SH_HS7751RVOIP
 	bool "HS7751RVOIP"
-	select CPU_SUBTYPE_SH7751R
+	depends on CPU_SUBTYPE_SH7751R
 	help
 	  Select HS7751RVOIP if configuring for a Renesas Technology
 	  Sales VoIP board.
 
 config SH_7710VOIPGW
 	bool "SH7710-VOIP-GW"
-	select CPU_SUBTYPE_SH7710
+	depends on CPU_SUBTYPE_SH7710
 	help
 	  Select this option to build a kernel for the SH7710 based
 	  VOIP GW.
 
 config SH_RTS7751R2D
 	bool "RTS7751R2D"
-	select CPU_SUBTYPE_SH7751R
+	depends on CPU_SUBTYPE_SH7751R
 	help
 	  Select RTS7751R2D if configuring for a Renesas Technology
 	  Sales SH-Graphics board.
 
 config SH_HIGHLANDER
 	bool "Highlander"
+	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
 
 config SH_EDOSK7705
 	bool "EDOSK7705"
-	select CPU_SUBTYPE_SH7705
+	depends on CPU_SUBTYPE_SH7705
 
 config SH_SH4202_MICRODEV
 	bool "SH4-202 MicroDev"
-	select CPU_SUBTYPE_SH4_202
+	depends on CPU_SUBTYPE_SH4_202
 	help
 	  Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
 	  with an SH4-202 CPU.
 
 config SH_LANDISK
 	bool "LANDISK"
-	select CPU_SUBTYPE_SH7751R
+	depends on CPU_SUBTYPE_SH7751R
 	help
 	  I-O DATA DEVICE, INC. "LANDISK Series" support.
 
 config SH_TITAN
 	bool "TITAN"
-	select CPU_SUBTYPE_SH7751R
+	depends on CPU_SUBTYPE_SH7751R
 	help
 	  Select Titan if you are configuring for a Nimble Microsystems
 	  NetEngine NP51R.
 
 config SH_SHMIN
 	bool "SHMIN"
-	select CPU_SUBTYPE_SH7706
+	depends on CPU_SUBTYPE_SH7706
 	help
 	  Select SHMIN if configuring for the SHMIN board.
 
-config SH_7206_SOLUTION_ENGINE
-	bool "SolutionEngine7206"
-	select CPU_SUBTYPE_SH7206
-	help
-	  Select 7206 SolutionEngine if configuring for a Hitachi SH7206
-	  evaluation board.
-
-config SH_7619_SOLUTION_ENGINE
-	bool "SolutionEngine7619"
-	select CPU_SUBTYPE_SH7619
-	help
-	  Select 7619 SolutionEngine if configuring for a Hitachi SH7619
-	  evaluation board.
-	
 config SH_LBOX_RE2
 	bool "L-BOX RE2"
-	select CPU_SUBTYPE_SH7751R
+	depends on CPU_SUBTYPE_SH7751R
 	help
 	  Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
 
@@ -281,14 +393,12 @@ config SH_UNKNOWN
 
 	  This option is for the early stages of porting to a new machine.
 
-endchoice
+endmenu
 
 source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
 source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
 source "arch/sh/boards/renesas/r7780rp/Kconfig"
 
-source "arch/sh/mm/Kconfig"
-
 config CF_ENABLER
 	bool "Compact Flash Enabler support"
 	depends on SH_SOLUTION_ENGINE || SH_UNKNOWN || SH_SH03
@@ -332,110 +442,6 @@ config CF_BASE_ADDR
 	default "0xb8000000" if CF_AREA6
 	default "0xb4000000" if CF_AREA5
 
-menu "Processor features"
-
-choice
-	prompt "Endianess selection" 
-	default CPU_LITTLE_ENDIAN
-	help
-	  Some SuperH machines can be configured for either little or big
-	  endian byte order. These modes require different kernels.
-
-config CPU_LITTLE_ENDIAN
-	bool "Little Endian"
-
-config CPU_BIG_ENDIAN
-	bool "Big Endian"
-
-endchoice
-
-config SH_FPU
-	bool "FPU support"
-	depends on !CPU_SH3
-	default y
-	help
-	  Selecting this option will enable support for SH processors that
-	  have FPU units (ie, SH77xx).
-
-	  This option must be set in order to enable the FPU.
-
-config SH_FPU_EMU
-	bool "FPU emulation support"
-	depends on !SH_FPU && EXPERIMENTAL
-	default n
-	help
-	  Selecting this option will enable support for software FPU emulation.
-	  Most SH-3 users will want to say Y here, whereas most SH-4 users will
-	  want to say N.
-
-config SH_DSP
-	bool "DSP support"
-	default y if SH4AL_DSP || !CPU_SH4
-	default n
-	help
-	  Selecting this option will enable support for SH processors that
-	  have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP).
-
-	  This option must be set in order to enable the DSP.
-
-config SH_ADC
-	bool "ADC support"
-	depends on CPU_SH3
-	default y
-	help
-	  Selecting this option will allow the Linux kernel to use SH3 on-chip
-	  ADC module.
-
-	  If unsure, say N.
-
-config SH_STORE_QUEUES
-	bool "Support for Store Queues"
-	depends on CPU_SH4
-	help
-	  Selecting this option will enable an in-kernel API for manipulating
-	  the store queues integrated in the SH-4 processors.
-
-config SPECULATIVE_EXECUTION
-	bool "Speculative subroutine return"
-	depends on CPU_SUBTYPE_SH7780 && EXPERIMENTAL
-	help
-	  This enables support for a speculative instruction fetch for
-	  subroutine return. There are various pitfalls associated with
-	  this, as outlined in the SH7780 hardware manual.
-
-	  If unsure, say N.
-
-config CPU_HAS_INTEVT
-	bool
-
-config CPU_HAS_PINT_IRQ
-	bool
-
-config CPU_HAS_MASKREG_IRQ
-	bool
-
-config CPU_HAS_INTC2_IRQ
-	bool
-
-config CPU_HAS_IPR_IRQ
-	bool
-
-config CPU_HAS_SR_RB
-	bool "CPU has SR.RB"
-	depends on CPU_SH3 || CPU_SH4
-	default y
-	help
-	  This will enable the use of SR.RB register bank usage. Processors
-	  that are lacking this bit must have another method in place for
-	  accomplishing what is taken care of by the banked registers.
-
-	  See <file:Documentation/sh/register-banks.txt> for further
-	  information on SR.RB and register banking in the kernel in general.
-
-config CPU_HAS_PTEA
-	bool
-
-endmenu
 
 menu "Timer and clock configuration"
 
diff --git a/arch/sh/boards/renesas/r7780rp/Kconfig b/arch/sh/boards/renesas/r7780rp/Kconfig
index 9fb11641fe1..fc8f28e04ba 100644
--- a/arch/sh/boards/renesas/r7780rp/Kconfig
+++ b/arch/sh/boards/renesas/r7780rp/Kconfig
@@ -6,18 +6,18 @@ choice
 
 config SH_R7780RP
 	bool "R7780RP-1 board support"
-	select CPU_SUBTYPE_SH7780
+	depends on CPU_SUBTYPE_SH7780
 
 config SH_R7780MP
 	bool "R7780MP board support"
-	select CPU_SUBTYPE_SH7780
+	depends on CPU_SUBTYPE_SH7780
 	help
 	  Selecting this option will enable support for the mass-production
 	  version of the R7780RP. If in doubt, say Y.
 
 config SH_R7785RP
 	bool "R7785RP board support"
-	select CPU_SUBTYPE_SH7785
+	depends on CPU_SUBTYPE_SH7785
 
 endchoice
 
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 253346d7b31..8f826b03f9f 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -1,5 +1,3 @@
-menu "Processor selection"
-
 #
 # Processor families
 #
@@ -38,11 +36,14 @@ config CPU_SUBTYPE_ST40
 config CPU_SHX2
 	bool
 
+choice
+	prompt "Processor sub-type selection"
+
 #
 # Processor subtypes
 #
 
-comment "SH-2 Processor Support"
+# SH-2 Processor Support
 
 config CPU_SUBTYPE_SH7604
 	bool "Support SH7604 processor"
@@ -52,13 +53,13 @@ config CPU_SUBTYPE_SH7619
 	bool "Support SH7619 processor"
 	select CPU_SH2
 
-comment "SH-2A Processor Support"
+# SH-2A Processor Support
 
 config CPU_SUBTYPE_SH7206
 	bool "Support SH7206 processor"
 	select CPU_SH2A
 
-comment "SH-3 Processor Support"
+# SH-3 Processor Support
 
 config CPU_SUBTYPE_SH7300
 	bool "Support SH7300 processor"
@@ -113,7 +114,7 @@ config CPU_SUBTYPE_SH7712
 	help
 	  Select SH7712 if you have a SH3-DSP SH7712 CPU.
 
-comment "SH-4 Processor Support"
+# SH-4 Processor Support
 
 config CPU_SUBTYPE_SH7750
 	bool "Support SH7750 processor"
@@ -166,7 +167,7 @@ config CPU_SUBTYPE_SH4_202
 	bool "Support SH4-202 processor"
 	select CPU_SH4
 
-comment "ST40 Processor Support"
+# ST40 Processor Support
 
 config CPU_SUBTYPE_ST40STB1
 	bool "Support ST40STB1/ST40RA processors"
@@ -181,7 +182,7 @@ config CPU_SUBTYPE_ST40GX1
 	help
 	  Select ST40GX1 if you have a ST40GX1 CPU.
 
-comment "SH-4A Processor Support"
+# SH-4A Processor Support
 
 config CPU_SUBTYPE_SH7770
 	bool "Support SH7770 processor"
@@ -198,7 +199,7 @@ config CPU_SUBTYPE_SH7785
 	select CPU_SHX2
 	select CPU_HAS_INTC2_IRQ
 
-comment "SH4AL-DSP Processor Support"
+# SH4AL-DSP Processor Support
 
 config CPU_SUBTYPE_SH73180
 	bool "Support SH73180 processor"
@@ -214,7 +215,7 @@ config CPU_SUBTYPE_SH7722
 	select CPU_SHX2
 	select CPU_HAS_IPR_IRQ
 
-endmenu
+endchoice
 
 menu "Memory management options"
 
-- 
cgit v1.2.3


From ba36197cf4ff68f631bb1b3d4cc442d567279fe3 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 14 May 2007 17:48:00 +0900
Subject: sh: Fixup cmdline handling from machvec changes.

The command line wasn't being saved off properly after the machvec
changes went in, fix it up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/setup.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 0ad71583399..65c093145da 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -194,10 +194,6 @@ void __init setup_arch(char **cmdline_p)
 {
 	enable_mmu();
 
-#ifdef CONFIG_CMDLINE_BOOL
-	strcpy(COMMAND_LINE, CONFIG_CMDLINE);
-#endif
-
 	ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
 
 #ifdef CONFIG_BLK_DEV_RAM
@@ -221,9 +217,14 @@ void __init setup_arch(char **cmdline_p)
 	memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START;
 	memory_end = memory_start + __MEMORY_SIZE;
 
-	/* Save unparsed command line copy for /proc/cmdline */
-	strlcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
+#ifdef CONFIG_CMDLINE_BOOL
+	strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line));
+#else
+	strlcpy(command_line, COMMAND_LINE, sizeof(command_line));
+#endif
 
+	/* Save unparsed command line copy for /proc/cmdline */
+	memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
 	*cmdline_p = command_line;
 
 	parse_early_param();
-- 
cgit v1.2.3


From 25f8151bdcdd62c6b879e3669a562c0d329eee4a Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 14 May 2007 19:12:37 +0900
Subject: sh: Get multiple boards in one image working again.

This tidies up the build rules and permits multiple boards to be
linked in to the same kernel. The earlier Kconfig work ensures that
the CPU configuration is consistent across the boards, as this is
the only thing that we can't do dynamically.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Makefile | 88 ++++++++++++++++++++++++++++++++------------------------
 1 file changed, 50 insertions(+), 38 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 883b03b040c..c7323e7dce6 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -87,39 +87,39 @@ core-y				+= arch/sh/kernel/ arch/sh/mm/
 core-$(CONFIG_SH_FPU_EMU)	+= arch/sh/math-emu/
 
 # Boards
-machdir-$(CONFIG_SH_SOLUTION_ENGINE)		:= se/770x
-machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE)	:= se/7722
-machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE)	:= se/7751
-machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE)	:= se/7780
-machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE)	:= se/7300
-machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE)	:= se/7343
-machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE)	:= se/73180
-machdir-$(CONFIG_SH_HP6XX)			:= hp6xx
-machdir-$(CONFIG_SH_SATURN)			:= saturn
-machdir-$(CONFIG_SH_DREAMCAST)			:= dreamcast
-machdir-$(CONFIG_SH_MPC1211)			:= mpc1211
-machdir-$(CONFIG_SH_SH03)			:= sh03
-machdir-$(CONFIG_SH_SECUREEDGE5410)		:= snapgear
-machdir-$(CONFIG_SH_HS7751RVOIP)		:= renesas/hs7751rvoip
-machdir-$(CONFIG_SH_RTS7751R2D)			:= renesas/rts7751r2d
-machdir-$(CONFIG_SH_7751_SYSTEMH)		:= renesas/systemh
-machdir-$(CONFIG_SH_EDOSK7705)			:= renesas/edosk7705
-machdir-$(CONFIG_SH_HIGHLANDER)			:= renesas/r7780rp
-machdir-$(CONFIG_SH_7710VOIPGW)			:= renesas/sh7710voipgw
-machdir-$(CONFIG_SH_SH4202_MICRODEV)		:= superh/microdev
-machdir-$(CONFIG_SH_LANDISK)			:= landisk
-machdir-$(CONFIG_SH_TITAN)			:= titan
-machdir-$(CONFIG_SH_SHMIN)			:= shmin
-machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE)	:= se/7206
-machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE)	:= se/7619
-machdir-$(CONFIG_SH_LBOX_RE2)			:= lboxre2
-machdir-$(CONFIG_SH_UNKNOWN)			:= unknown
-
-incdir-y			:= $(notdir $(machdir-y))
-incdir-$(CONFIG_SH_HP6XX)			:= hp6xx
+machdir-$(CONFIG_SH_SOLUTION_ENGINE)		+= se/770x
+machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE)	+= se/7722
+machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE)	+= se/7751
+machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= se/7780
+machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE)	+= se/7300
+machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE)	+= se/7343
+machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE)	+= se/73180
+machdir-$(CONFIG_SH_HP6XX)			+= hp6xx
+machdir-$(CONFIG_SH_SATURN)			+= saturn
+machdir-$(CONFIG_SH_DREAMCAST)			+= dreamcast
+machdir-$(CONFIG_SH_MPC1211)			+= mpc1211
+machdir-$(CONFIG_SH_SH03)			+= sh03
+machdir-$(CONFIG_SH_SECUREEDGE5410)		+= snapgear
+machdir-$(CONFIG_SH_HS7751RVOIP)		+= renesas/hs7751rvoip
+machdir-$(CONFIG_SH_RTS7751R2D)			+= renesas/rts7751r2d
+machdir-$(CONFIG_SH_7751_SYSTEMH)		+= renesas/systemh
+machdir-$(CONFIG_SH_EDOSK7705)			+= renesas/edosk7705
+machdir-$(CONFIG_SH_HIGHLANDER)			+= renesas/r7780rp
+machdir-$(CONFIG_SH_7710VOIPGW)			+= renesas/sh7710voipgw
+machdir-$(CONFIG_SH_SH4202_MICRODEV)		+= superh/microdev
+machdir-$(CONFIG_SH_LANDISK)			+= landisk
+machdir-$(CONFIG_SH_TITAN)			+= titan
+machdir-$(CONFIG_SH_SHMIN)			+= shmin
+machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE)	+= se/7206
+machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE)	+= se/7619
+machdir-$(CONFIG_SH_LBOX_RE2)			+= lboxre2
+machdir-$(CONFIG_SH_UNKNOWN)			+= unknown
+
+incdir-y	:= $(notdir $(machdir-y))
 
 ifneq ($(machdir-y),)
-core-y				+= arch/sh/boards/$(machdir-y)/
+core-y	+= $(addprefix arch/sh/boards/, \
+	     $(filter-out ., $(patsubst %,%/,$(machdir-y))))
 endif
 
 # Companion chips
@@ -157,19 +157,31 @@ include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) \
 #	Most boards have their own mach directories.  For the ones that
 #	don't, just reference the parent directory so the semantics are
 #	kept roughly the same.
+#
+#	When multiple boards are compiled in at the same time, preference
+#	for the mach link is given to whichever has a directory for its
+#	headers. However, this is only a workaround until platforms that
+#	can live in the same kernel image back away from relying on the
+#	mach link.
 
 include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \
 		      include/config/auto.conf FORCE
-	@echo -n '  SYMLINK include/asm-sh/mach -> '
 	$(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
-	$(Q)if [ -d $(incdir-prefix)$(incdir-y) ]; then \
-		echo -e 'include/asm-sh/$(incdir-y)'; \
-		ln -fsn $(incdir-prefix)$(incdir-y) \
+	$(Q)rm -f include/asm-sh/mach
+	$(Q)for i in $(incdir-y); do \
+	if [ -d $(incdir-prefix)$$i ]; then \
+		echo -n '  SYMLINK include/asm-sh/mach -> '; \
+		echo -e "include/asm-sh/$$i"; \
+		ln -fsn $(incdir-prefix)$$i \
 			include/asm-sh/mach; \
 	else \
-		echo -e 'include/asm-sh'; \
-		ln -fsn $(incdir-prefix) include/asm-sh/mach; \
-	fi
+		if [ ! -d include/asm-sh/mach ]; then \
+			echo -n '  SYMLINK include/asm-sh/mach -> '; \
+			echo -e 'include/asm-sh'; \
+			ln -fsn $(incdir-prefix) include/asm-sh/mach; \
+		fi; \
+	fi; \
+	done
 	@touch $@
 
 archprepare: include/asm-sh/.cpu include/asm-sh/.mach maketools
-- 
cgit v1.2.3


From 82f81f4784479df17a80caff4a7156da0a2f7dea Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 15 May 2007 15:19:34 +0900
Subject: sh: Kill off machvec aliases.

We now throw all of the machvecs in to .machvec.init and either
select one on the command line, or copy out the first (and
usually only) one to sh_mv. The rest are freed as usual.

This gets rid of all of the silly sh_mv aliasing and makes the
selection explicit rather than link-order dependent.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/dreamcast/setup.c            |  3 +-
 arch/sh/boards/hp6xx/mach.c                 |  4 +--
 arch/sh/boards/hp6xx/setup.c                |  3 +-
 arch/sh/boards/landisk/setup.c              |  3 +-
 arch/sh/boards/lboxre2/setup.c              |  3 +-
 arch/sh/boards/mpc1211/setup.c              |  3 +-
 arch/sh/boards/renesas/edosk7705/setup.c    |  3 +-
 arch/sh/boards/renesas/hs7751rvoip/setup.c  |  3 +-
 arch/sh/boards/renesas/r7780rp/setup.c      |  3 +-
 arch/sh/boards/renesas/rts7751r2d/setup.c   |  3 +-
 arch/sh/boards/renesas/sh7710voipgw/setup.c |  3 +-
 arch/sh/boards/renesas/systemh/setup.c      |  3 +-
 arch/sh/boards/saturn/setup.c               |  3 +-
 arch/sh/boards/se/7206/setup.c              |  3 +-
 arch/sh/boards/se/7300/setup.c              |  3 +-
 arch/sh/boards/se/73180/setup.c             |  3 +-
 arch/sh/boards/se/7343/setup.c              |  3 +-
 arch/sh/boards/se/7619/setup.c              |  3 +-
 arch/sh/boards/se/770x/setup.c              |  3 +-
 arch/sh/boards/se/7722/setup.c              |  3 +-
 arch/sh/boards/se/7751/setup.c              |  3 +-
 arch/sh/boards/se/7780/setup.c              |  3 +-
 arch/sh/boards/sh03/setup.c                 |  3 +-
 arch/sh/boards/shmin/setup.c                |  3 +-
 arch/sh/boards/snapgear/setup.c             |  3 +-
 arch/sh/boards/superh/microdev/setup.c      |  3 +-
 arch/sh/boards/titan/setup.c                |  3 +-
 arch/sh/boards/unknown/setup.c              |  3 +-
 arch/sh/kernel/machvec.c                    | 45 ++++++++++++++++++++---------
 arch/sh/kernel/setup.c                      |  7 +++++
 30 files changed, 66 insertions(+), 71 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/dreamcast/setup.c
index f13017eeeb2..8799df6e866 100644
--- a/arch/sh/boards/dreamcast/setup.c
+++ b/arch/sh/boards/dreamcast/setup.c
@@ -60,7 +60,7 @@ static void __init dreamcast_setup(char **cmdline_p)
 #endif
 }
 
-struct sh_machine_vector mv_dreamcast __initmv = {
+static struct sh_machine_vector mv_dreamcast __initmv = {
 	.mv_name		= "Sega Dreamcast",
 	.mv_setup		= dreamcast_setup,
 	.mv_irq_demux		= systemasic_irq_demux,
@@ -70,4 +70,3 @@ struct sh_machine_vector mv_dreamcast __initmv = {
 	.mv_consistent_free	= dreamcast_consistent_free,
 #endif
 };
-ALIAS_MV(dreamcast)
diff --git a/arch/sh/boards/hp6xx/mach.c b/arch/sh/boards/hp6xx/mach.c
index 08dbba910f7..35b89596047 100644
--- a/arch/sh/boards/hp6xx/mach.c
+++ b/arch/sh/boards/hp6xx/mach.c
@@ -13,7 +13,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-struct sh_machine_vector mv_hp6xx __initmv = {
+static struct sh_machine_vector mv_hp6xx __initmv = {
 	.mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM,
 
 	.mv_inb = hd64461_inb,
@@ -42,5 +42,3 @@ struct sh_machine_vector mv_hp6xx __initmv = {
 
 	.mv_irq_demux = hd64461_irq_demux,
 };
-
-ALIAS_MV(hp6xx)
diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/hp6xx/setup.c
index 6aeee85c978..7ae708930ba 100644
--- a/arch/sh/boards/hp6xx/setup.c
+++ b/arch/sh/boards/hp6xx/setup.c
@@ -98,10 +98,9 @@ static void __init hp6xx_setup(char **cmdline_p)
 }
 device_initcall(hp6xx_devices_setup);
 
-struct sh_machine_vector mv_hp6xx __initmv = {
+static struct sh_machine_vector mv_hp6xx __initmv = {
 	.mv_name = "hp6xx",
 	.mv_setup = hp6xx_setup,
 	.mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM,
 	.mv_irq_demux = hd64461_irq_demux,
 };
-ALIAS_MV(hp6xx)
diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/landisk/setup.c
index f953c742776..eda71763ecc 100644
--- a/arch/sh/boards/landisk/setup.c
+++ b/arch/sh/boards/landisk/setup.c
@@ -97,10 +97,9 @@ static void __init landisk_setup(char **cmdline_p)
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_landisk __initmv = {
+static struct sh_machine_vector mv_landisk __initmv = {
 	.mv_name = "LANDISK",
 	.mv_nr_irqs = 72,
 	.mv_setup = landisk_setup,
 	.mv_init_irq = init_landisk_IRQ,
 };
-ALIAS_MV(landisk)
diff --git a/arch/sh/boards/lboxre2/setup.c b/arch/sh/boards/lboxre2/setup.c
index 4e20f7c63bf..9c830fdc411 100644
--- a/arch/sh/boards/lboxre2/setup.c
+++ b/arch/sh/boards/lboxre2/setup.c
@@ -77,9 +77,8 @@ device_initcall(lboxre2_devices_setup);
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_lboxre2 __initmv = {
+static struct sh_machine_vector mv_lboxre2 __initmv = {
 	.mv_name		= "L-BOX RE2",
 	.mv_nr_irqs		= 72,
 	.mv_init_irq		= init_lboxre2_IRQ,
 };
-ALIAS_MV(lboxre2)
diff --git a/arch/sh/boards/mpc1211/setup.c b/arch/sh/boards/mpc1211/setup.c
index 1a0604b23ce..8ce03e00b0a 100644
--- a/arch/sh/boards/mpc1211/setup.c
+++ b/arch/sh/boards/mpc1211/setup.c
@@ -338,11 +338,10 @@ static void __init mpc1211_setup(char **cmdline_p)
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_mpc1211 __initmv = {
+static struct sh_machine_vector mv_mpc1211 __initmv = {
 	.mv_name		= "Interface MPC-1211(CTP/PCI/MPC-SH02)",
 	.mv_setup		= mpc1211_setup,
 	.mv_nr_irqs		= 48,
 	.mv_irq_demux		= mpc1211_irq_demux,
 	.mv_init_irq		= init_mpc1211_IRQ,
 };
-ALIAS_MV(mpc1211)
diff --git a/arch/sh/boards/renesas/edosk7705/setup.c b/arch/sh/boards/renesas/edosk7705/setup.c
index ec5be010771..f076c45308d 100644
--- a/arch/sh/boards/renesas/edosk7705/setup.c
+++ b/arch/sh/boards/renesas/edosk7705/setup.c
@@ -21,7 +21,7 @@ static void __init sh_edosk7705_init_irq(void)
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_edosk7705 __initmv = {
+static struct sh_machine_vector mv_edosk7705 __initmv = {
 	.mv_name		= "EDOSK7705",
 	.mv_nr_irqs		= 80,
 
@@ -41,4 +41,3 @@ struct sh_machine_vector mv_edosk7705 __initmv = {
 	.mv_isa_port2addr	= sh_edosk7705_isa_port2addr,
 	.mv_init_irq		= sh_edosk7705_init_irq,
 };
-ALIAS_MV(edosk7705)
diff --git a/arch/sh/boards/renesas/hs7751rvoip/setup.c b/arch/sh/boards/renesas/hs7751rvoip/setup.c
index f7d0e304d89..fa5fa392022 100644
--- a/arch/sh/boards/renesas/hs7751rvoip/setup.c
+++ b/arch/sh/boards/renesas/hs7751rvoip/setup.c
@@ -89,7 +89,7 @@ static void __init hs7751rvoip_setup(char **cmdline_p)
 	printk(KERN_INFO "Renesas Technology Sales HS7751RVoIP-2 support.\n");
 }
 
-struct sh_machine_vector mv_hs7751rvoip __initmv = {
+static struct sh_machine_vector mv_hs7751rvoip __initmv = {
 	.mv_name		= "HS7751RVoIP",
 	.mv_setup		= hs7751rvoip_setup,
 	.mv_nr_irqs		= 72,
@@ -118,4 +118,3 @@ struct sh_machine_vector mv_hs7751rvoip __initmv = {
 	.mv_init_irq		= hs7751rvoip_init_irq,
 	.mv_ioport_map		= hs7751rvoip_ioport_map,
 };
-ALIAS_MV(hs7751rvoip)
diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c
index 0727ef92f2b..5afb864a1ec 100644
--- a/arch/sh/boards/renesas/r7780rp/setup.c
+++ b/arch/sh/boards/renesas/r7780rp/setup.c
@@ -166,10 +166,9 @@ static void __init highlander_setup(char **cmdline_p)
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_highlander __initmv = {
+static struct sh_machine_vector mv_highlander __initmv = {
 	.mv_name		= "Highlander",
 	.mv_nr_irqs		= 109,
 	.mv_setup		= highlander_setup,
 	.mv_init_irq		= highlander_init_irq,
 };
-ALIAS_MV(highlander)
diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c
index 593f26a85e9..656fda30ef7 100644
--- a/arch/sh/boards/renesas/rts7751r2d/setup.c
+++ b/arch/sh/boards/renesas/rts7751r2d/setup.c
@@ -176,7 +176,7 @@ static void __init rts7751r2d_setup(char **cmdline_p)
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_rts7751r2d __initmv = {
+static struct sh_machine_vector mv_rts7751r2d __initmv = {
 	.mv_name		= "RTS7751R2D",
 	.mv_setup		= rts7751r2d_setup,
 	.mv_nr_irqs		= 72,
@@ -189,4 +189,3 @@ struct sh_machine_vector mv_rts7751r2d __initmv = {
 	.mv_consistent_free	= voyagergx_consistent_free,
 #endif
 };
-ALIAS_MV(rts7751r2d)
diff --git a/arch/sh/boards/renesas/sh7710voipgw/setup.c b/arch/sh/boards/renesas/sh7710voipgw/setup.c
index 180810b1210..2dce8bd97f9 100644
--- a/arch/sh/boards/renesas/sh7710voipgw/setup.c
+++ b/arch/sh/boards/renesas/sh7710voipgw/setup.c
@@ -88,9 +88,8 @@ static void __init sh7710voipgw_init_irq(void)
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_sh7710voipgw __initmv = {
+static struct sh_machine_vector mv_sh7710voipgw __initmv = {
 	.mv_name		= "SH7710 VoIP Gateway",
 	.mv_nr_irqs		= 104,
 	.mv_init_irq		= sh7710voipgw_init_irq,
 };
-ALIAS_MV(sh7710voipgw)
diff --git a/arch/sh/boards/renesas/systemh/setup.c b/arch/sh/boards/renesas/systemh/setup.c
index 936117659b7..ee78af84277 100644
--- a/arch/sh/boards/renesas/systemh/setup.c
+++ b/arch/sh/boards/renesas/systemh/setup.c
@@ -28,7 +28,7 @@ static void __init sh7751systemh_init_irq(void)
 	make_systemh_irq(0xb);	/* Ethernet interrupt */
 }
 
-struct sh_machine_vector mv_7751systemh __initmv = {
+static struct sh_machine_vector mv_7751systemh __initmv = {
 	.mv_name		= "7751 SystemH",
 	.mv_nr_irqs		= 72,
 
@@ -55,4 +55,3 @@ struct sh_machine_vector mv_7751systemh __initmv = {
 
 	.mv_init_irq		= sh7751systemh_init_irq,
 };
-ALIAS_MV(7751systemh)
diff --git a/arch/sh/boards/saturn/setup.c b/arch/sh/boards/saturn/setup.c
index a3a37c9aad2..7df4312fbb1 100644
--- a/arch/sh/boards/saturn/setup.c
+++ b/arch/sh/boards/saturn/setup.c
@@ -18,7 +18,7 @@ extern int saturn_irq_demux(int irq_nr);
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_saturn __initmv = {
+static struct sh_machine_vector mv_saturn __initmv = {
 	.mv_name		= "Sega Saturn",
 	.mv_nr_irqs		= 80,	/* Fix this later */
 
@@ -28,4 +28,3 @@ struct sh_machine_vector mv_saturn __initmv = {
 	.mv_ioremap		= saturn_ioremap,
 	.mv_iounmap		= saturn_iounmap,
 };
-ALIAS_MV(saturn)
diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/se/7206/setup.c
index ca714879f55..a074b62505e 100644
--- a/arch/sh/boards/se/7206/setup.c
+++ b/arch/sh/boards/se/7206/setup.c
@@ -70,7 +70,7 @@ __initcall(se7206_devices_setup);
  * The Machine Vector
  */
 
-struct sh_machine_vector mv_se __initmv = {
+static struct sh_machine_vector mv_se __initmv = {
 	.mv_name		= "SolutionEngine",
 	.mv_nr_irqs		= 256,
 	.mv_inb			= se7206_inb,
@@ -96,4 +96,3 @@ struct sh_machine_vector mv_se __initmv = {
 
 	.mv_init_irq		= init_se7206_IRQ,
 };
-ALIAS_MV(se)
diff --git a/arch/sh/boards/se/7300/setup.c b/arch/sh/boards/se/7300/setup.c
index f1960956bad..eb469f5b6e9 100644
--- a/arch/sh/boards/se/7300/setup.c
+++ b/arch/sh/boards/se/7300/setup.c
@@ -46,7 +46,7 @@ __initcall(se7300_devices_setup);
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_7300se __initmv = {
+static struct sh_machine_vector mv_7300se __initmv = {
 	.mv_name = "SolutionEngine 7300",
 	.mv_nr_irqs = 109,
 	.mv_inb = sh7300se_inb,
@@ -72,4 +72,3 @@ struct sh_machine_vector mv_7300se __initmv = {
 
 	.mv_init_irq = init_7300se_IRQ,
 };
-ALIAS_MV(7300se)
diff --git a/arch/sh/boards/se/73180/setup.c b/arch/sh/boards/se/73180/setup.c
index e143017c897..1deee855664 100644
--- a/arch/sh/boards/se/73180/setup.c
+++ b/arch/sh/boards/se/73180/setup.c
@@ -46,7 +46,7 @@ __initcall(se73180_devices_setup);
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_73180se __initmv = {
+static struct sh_machine_vector mv_73180se __initmv = {
 	.mv_name = "SolutionEngine 73180",
 	.mv_nr_irqs = 108,
 	.mv_inb = sh73180se_inb,
@@ -73,4 +73,3 @@ struct sh_machine_vector mv_73180se __initmv = {
 	.mv_init_irq = init_73180se_IRQ,
 	.mv_irq_demux = shmse_irq_demux,
 };
-ALIAS_MV(73180se)
diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c
index 3fdb16f2cef..8fec155e2ff 100644
--- a/arch/sh/boards/se/7343/setup.c
+++ b/arch/sh/boards/se/7343/setup.c
@@ -64,7 +64,7 @@ static void __init sh7343se_setup(char **cmdline_p)
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_7343se __initmv = {
+static struct sh_machine_vector mv_7343se __initmv = {
 	.mv_name = "SolutionEngine 7343",
 	.mv_setup = sh7343se_setup,
 	.mv_nr_irqs = 108,
@@ -92,4 +92,3 @@ struct sh_machine_vector mv_7343se __initmv = {
 	.mv_init_irq = init_7343se_IRQ,
 	.mv_irq_demux = shmse_irq_demux,
 };
-ALIAS_MV(7343se)
diff --git a/arch/sh/boards/se/7619/setup.c b/arch/sh/boards/se/7619/setup.c
index 52d2c4d5d2f..1d0ef7faa10 100644
--- a/arch/sh/boards/se/7619/setup.c
+++ b/arch/sh/boards/se/7619/setup.c
@@ -15,8 +15,7 @@
  * The Machine Vector
  */
 
-struct sh_machine_vector mv_se __initmv = {
+static struct sh_machine_vector mv_se __initmv = {
 	.mv_name		= "SolutionEngine",
 	.mv_nr_irqs		= 108,
 };
-ALIAS_MV(se)
diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c
index 17a2631de3b..2962da148f3 100644
--- a/arch/sh/boards/se/770x/setup.c
+++ b/arch/sh/boards/se/770x/setup.c
@@ -122,7 +122,7 @@ device_initcall(se_devices_setup);
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_se __initmv = {
+static struct sh_machine_vector mv_se __initmv = {
 	.mv_name		= "SolutionEngine",
 	.mv_setup		= smsc_setup,
 #if defined(CONFIG_CPU_SH4)
@@ -160,4 +160,3 @@ struct sh_machine_vector mv_se __initmv = {
 
 	.mv_init_irq		= init_se_IRQ,
 };
-ALIAS_MV(se)
diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c
index 636ca6c987e..6cca6cbc806 100644
--- a/arch/sh/boards/se/7722/setup.c
+++ b/arch/sh/boards/se/7722/setup.c
@@ -137,7 +137,7 @@ static void __init se7722_setup(char **cmdline_p)
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_se7722 __initmv = {
+static struct sh_machine_vector mv_se7722 __initmv = {
 	.mv_name                = "Solution Engine 7722" ,
 	.mv_setup               = se7722_setup ,
 	.mv_nr_irqs		= 109 ,
@@ -145,4 +145,3 @@ struct sh_machine_vector mv_se7722 __initmv = {
 	.mv_irq_demux           = se7722_irq_demux,
 
 };
-ALIAS_MV(se7722)
diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c
index 52c7bfa57c2..7873d07e40c 100644
--- a/arch/sh/boards/se/7751/setup.c
+++ b/arch/sh/boards/se/7751/setup.c
@@ -48,7 +48,7 @@ __initcall(se7751_devices_setup);
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_7751se __initmv = {
+static struct sh_machine_vector mv_7751se __initmv = {
 	.mv_name		= "7751 SolutionEngine",
 	.mv_nr_irqs		= 72,
 
@@ -71,4 +71,3 @@ struct sh_machine_vector mv_7751se __initmv = {
 
 	.mv_init_irq		= init_7751se_IRQ,
 };
-ALIAS_MV(7751se)
diff --git a/arch/sh/boards/se/7780/setup.c b/arch/sh/boards/se/7780/setup.c
index df7d08a24c9..723f2fd4d55 100644
--- a/arch/sh/boards/se/7780/setup.c
+++ b/arch/sh/boards/se/7780/setup.c
@@ -113,10 +113,9 @@ static void __init se7780_setup(char **cmdline_p)
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_se7780 __initmv = {
+static struct sh_machine_vector mv_se7780 __initmv = {
 	.mv_name                = "Solution Engine 7780" ,
 	.mv_setup               = se7780_setup ,
 	.mv_nr_irqs		= 111 ,
 	.mv_init_irq		= init_se7780_IRQ,
 };
-ALIAS_MV(se7780)
diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/sh03/setup.c
index c069c444b4e..d7867c190a9 100644
--- a/arch/sh/boards/sh03/setup.c
+++ b/arch/sh/boards/sh03/setup.c
@@ -74,11 +74,10 @@ static int __init sh03_devices_setup(void)
 }
 __initcall(sh03_devices_setup);
 
-struct sh_machine_vector mv_sh03 __initmv = {
+static struct sh_machine_vector mv_sh03 __initmv = {
 	.mv_name		= "Interface (CTP/PCI-SH03)",
 	.mv_setup		= sh03_setup,
 	.mv_nr_irqs		= 48,
 	.mv_ioport_map		= sh03_ioport_map,
 	.mv_init_irq		= init_sh03_IRQ,
 };
-ALIAS_MV(sh03)
diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/shmin/setup.c
index 4a9df4a6b03..9c8bb51eb4b 100644
--- a/arch/sh/boards/shmin/setup.c
+++ b/arch/sh/boards/shmin/setup.c
@@ -43,9 +43,8 @@ static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size)
 
 }
 
-struct sh_machine_vector mv_shmin __initmv = {
+static struct sh_machine_vector mv_shmin __initmv = {
 	.mv_name	= "SHMIN",
 	.mv_init_irq	= init_shmin_irq,
 	.mv_ioport_map	= shmin_ioport_map,
 };
-ALIAS_MV(shmin)
diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c
index 650fb364594..b40124c092f 100644
--- a/arch/sh/boards/snapgear/setup.c
+++ b/arch/sh/boards/snapgear/setup.c
@@ -96,7 +96,7 @@ static void __init snapgear_setup(char **cmdline_p)
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_snapgear __initmv = {
+static struct sh_machine_vector mv_snapgear __initmv = {
 	.mv_name		= "SnapGear SecureEdge5410",
 	.mv_setup		= snapgear_setup,
 	.mv_nr_irqs		= 72,
@@ -117,4 +117,3 @@ struct sh_machine_vector mv_snapgear __initmv = {
 
 	.mv_init_irq		= init_snapgear_IRQ,
 };
-ALIAS_MV(snapgear)
diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/superh/microdev/setup.c
index 6396cea1c89..fc8cd06d66c 100644
--- a/arch/sh/boards/superh/microdev/setup.c
+++ b/arch/sh/boards/superh/microdev/setup.c
@@ -371,7 +371,7 @@ static void __init microdev_setup(char **cmdline_p)
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_sh4202_microdev __initmv = {
+static struct sh_machine_vector mv_sh4202_microdev __initmv = {
 	.mv_name		= "SH4-202 MicroDev",
 	.mv_setup		= microdev_setup,
 	.mv_nr_irqs		= 72,		/* QQQ need to check this - use the MACRO */
@@ -403,4 +403,3 @@ struct sh_machine_vector mv_sh4202_microdev __initmv = {
 	.mv_heartbeat		= microdev_heartbeat,
 #endif
 };
-ALIAS_MV(sh4202_microdev)
diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/titan/setup.c
index 6bcd939bfae..630f62f69a3 100644
--- a/arch/sh/boards/titan/setup.c
+++ b/arch/sh/boards/titan/setup.c
@@ -28,7 +28,7 @@ static void __init init_titan_irq(void)
 	make_ipr_irq(titan_ipr_map, ARRAY_SIZE(titan_ipr_map));
 }
 
-struct sh_machine_vector mv_titan __initmv = {
+static struct sh_machine_vector mv_titan __initmv = {
 	.mv_name =	"Titan",
 
 	.mv_inb =	titan_inb,
@@ -52,4 +52,3 @@ struct sh_machine_vector mv_titan __initmv = {
 
 	.mv_init_irq =	init_titan_irq,
 };
-ALIAS_MV(titan)
diff --git a/arch/sh/boards/unknown/setup.c b/arch/sh/boards/unknown/setup.c
index bee4612de59..f975a1f9094 100644
--- a/arch/sh/boards/unknown/setup.c
+++ b/arch/sh/boards/unknown/setup.c
@@ -15,7 +15,6 @@
 #include <linux/init.h>
 #include <asm/machvec.h>
 
-struct sh_machine_vector mv_unknown __initmv = {
+static struct sh_machine_vector mv_unknown __initmv = {
 	.mv_name		= "Unknown",
 };
-ALIAS_MV(unknown)
diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c
index 1e78191154e..e8121de5faa 100644
--- a/arch/sh/kernel/machvec.c
+++ b/arch/sh/kernel/machvec.c
@@ -29,7 +29,7 @@ static struct sh_machine_vector * __init get_mv_byname(const char *name)
 	struct sh_machine_vector *mv;
 
 	for_each_mv(mv)
-		if (strcasecmp(name, get_system_type()) == 0)
+		if (strcasecmp(name, mv->mv_name) == 0)
 			return mv;
 
 	return NULL;
@@ -55,26 +55,43 @@ static int __init early_parse_mv(char *from)
 	mv_name[mv_len] = '\0';
 	from = mv_end;
 
-	if (strcmp(sh_mv.mv_name, mv_name) != 0) {
-		mvp = get_mv_byname(mv_name);
-		if (unlikely(!mvp)) {
-			printk("Available vectors:\n\n\t");
-			for_each_mv(mvp)
-				printk("'%s', ", mvp->mv_name);
-			printk("\n\n");
-			panic("Failed to select machvec '%s' -- halting.\n",
-			      mv_name);
-		} else
-			sh_mv = *mvp;
-	}
+	mvp = get_mv_byname(mv_name);
+	if (unlikely(!mvp)) {
+		printk("Available vectors:\n\n\t");
+		for_each_mv(mvp)
+			printk("'%s', ", mvp->mv_name);
+		printk("\n\n");
+		panic("Failed to select machvec '%s' -- halting.\n",
+		      mv_name);
+	} else
+		sh_mv = *mvp;
 
-	printk(KERN_NOTICE "Booting machvec: %s\n", sh_mv.mv_name);
 	return 0;
 }
 early_param("sh_mv", early_parse_mv);
 
 void __init sh_mv_setup(void)
 {
+	/*
+	 * Only overload the machvec if one hasn't been selected on
+	 * the command line with sh_mv=
+	 */
+	if (strcmp(sh_mv.mv_name, "Unknown") != 0) {
+		unsigned long machvec_size;
+
+		machvec_size = ((unsigned long)&__machvec_end -
+				(unsigned long)&__machvec_start);
+
+		/*
+		 * If the machvec hasn't been preselected, use the first
+		 * vector (usually the only one) from .machvec.init.
+		 */
+		if (machvec_size >= sizeof(struct sh_machine_vector))
+			sh_mv = *(struct sh_machine_vector *)&__machvec_start;
+	}
+
+	printk(KERN_NOTICE "Booting machvec: %s\n", get_system_type());
+
 	/*
 	 * Manually walk the vec, fill in anything that the board hasn't yet
 	 * by hand, wrapping to the generic implementation.
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 65c093145da..55ed653c7a6 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -42,6 +42,13 @@ extern void * __rd_start, * __rd_end;
  * The bigger value means no problem.
  */
 struct sh_cpuinfo boot_cpu_data = { CPU_SH_NONE, 10000000, };
+
+/*
+ * The machine vector. First entry in .machvec.init, or clobbered by
+ * sh_mv= on the command line, prior to .machvec.init teardown.
+ */
+struct sh_machine_vector sh_mv = { .mv_name = "Unknown", };
+
 #ifdef CONFIG_VT
 struct screen_info screen_info;
 #endif
-- 
cgit v1.2.3


From fd8f20e8e2f8f1d9201086bff444c8d35f0a6a45 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 15 May 2007 15:38:30 +0900
Subject: sh: Rip out special unknown machvec.

This kills off the BareCPU board as a "special" machvec, rather,
we leave this as a default for when no other vector is available,
or when we want to use it in combination with other vectors for
testing with generic ops. As sh_mv is copied out anyways (or
overloaded when an alternate vector is explicitly selected), this
doesn't consume any additional memory.

The generic machvec can be forcibly selected with sh_mv=generic,
or by not having any other boards enabled.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig                 | 14 +-------------
 arch/sh/Makefile                |  1 -
 arch/sh/boards/unknown/Makefile |  6 ------
 arch/sh/boards/unknown/setup.c  | 20 --------------------
 arch/sh/kernel/cf-enabler.c     |  6 +-----
 arch/sh/kernel/machvec.c        | 12 ++++++++++--
 arch/sh/kernel/setup.c          |  2 +-
 7 files changed, 13 insertions(+), 48 deletions(-)
 delete mode 100644 arch/sh/boards/unknown/Makefile
 delete mode 100644 arch/sh/boards/unknown/setup.c

(limited to 'arch/sh')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 4c9d8fc59fe..6c42c8ed978 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -381,18 +381,6 @@ config SH_LBOX_RE2
 	help
 	  Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
 
-config SH_UNKNOWN
-	bool "BareCPU"
-	help
-	  "Bare CPU" aka "unknown" means an SH-based system which is not one
-	  of the specific ones mentioned above, which means you need to enter
-	  all sorts of stuff like CONFIG_MEMORY_START because the config
-	  system doesn't already know what it is.  You get a machine vector
-	  without any platform-specific code in it, so things like the RTC may
-	  not work.
-
-	  This option is for the early stages of porting to a new machine.
-
 endmenu
 
 source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
@@ -401,7 +389,7 @@ source "arch/sh/boards/renesas/r7780rp/Kconfig"
 
 config CF_ENABLER
 	bool "Compact Flash Enabler support"
-	depends on SH_SOLUTION_ENGINE || SH_UNKNOWN || SH_SH03
+	depends on SH_SOLUTION_ENGINE || SH_SH03
 	---help---
 	  Compact Flash is a small, removable mass storage device introduced
 	  in 1994 originally as a PCMCIA device.  If you say `Y' here, you
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index c7323e7dce6..ec2d82eda90 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -113,7 +113,6 @@ machdir-$(CONFIG_SH_SHMIN)			+= shmin
 machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE)	+= se/7206
 machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE)	+= se/7619
 machdir-$(CONFIG_SH_LBOX_RE2)			+= lboxre2
-machdir-$(CONFIG_SH_UNKNOWN)			+= unknown
 
 incdir-y	:= $(notdir $(machdir-y))
 
diff --git a/arch/sh/boards/unknown/Makefile b/arch/sh/boards/unknown/Makefile
deleted file mode 100644
index 7d18f408b0c..00000000000
--- a/arch/sh/boards/unknown/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for unknown SH boards 
-#
-
-obj-y	 := setup.o
-
diff --git a/arch/sh/boards/unknown/setup.c b/arch/sh/boards/unknown/setup.c
deleted file mode 100644
index f975a1f9094..00000000000
--- a/arch/sh/boards/unknown/setup.c
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/arch/sh/boards/unknown/setup.c
- *
- * Copyright (C) 2002 Paul Mundt
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Setup code for an unknown machine (internal peripherals only)
- *
- * This is the simplest of all boards, and serves only as a quick and dirty
- * method to start debugging a new board during bring-up until proper board
- * setup code is written.
- */
-#include <linux/init.h>
-#include <asm/machvec.h>
-
-static struct sh_machine_vector mv_unknown __initmv = {
-	.mv_name		= "Unknown",
-};
diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c
index ebc73b85094..1c3b99642e1 100644
--- a/arch/sh/kernel/cf-enabler.c
+++ b/arch/sh/kernel/cf-enabler.c
@@ -75,11 +75,7 @@ static int __init cf_init_default(void)
 #if defined(CONFIG_CPU_SH4)
 	allocate_cf_area();
 #endif
-#if defined(CONFIG_SH_UNKNOWN)
-	/* This should be done in each board's init_xxx_irq. */
-	make_imask_irq(14);
-	disable_irq(14);
-#endif
+
 	return 0;
 }
 
diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c
index e8121de5faa..23c5948f012 100644
--- a/arch/sh/kernel/machvec.c
+++ b/arch/sh/kernel/machvec.c
@@ -35,6 +35,8 @@ static struct sh_machine_vector * __init get_mv_byname(const char *name)
 	return NULL;
 }
 
+static unsigned int __initdata machvec_selected;
+
 static int __init early_parse_mv(char *from)
 {
 	char mv_name[MV_NAME_SIZE] = "";
@@ -55,9 +57,15 @@ static int __init early_parse_mv(char *from)
 	mv_name[mv_len] = '\0';
 	from = mv_end;
 
+	machvec_selected = 1;
+
+	/* Boot with the generic vector */
+	if (strcmp(mv_name, "generic") == 0)
+		return 0;
+
 	mvp = get_mv_byname(mv_name);
 	if (unlikely(!mvp)) {
-		printk("Available vectors:\n\n\t");
+		printk("Available vectors:\n\n\t'%s', ", sh_mv.mv_name);
 		for_each_mv(mvp)
 			printk("'%s', ", mvp->mv_name);
 		printk("\n\n");
@@ -76,7 +84,7 @@ void __init sh_mv_setup(void)
 	 * Only overload the machvec if one hasn't been selected on
 	 * the command line with sh_mv=
 	 */
-	if (strcmp(sh_mv.mv_name, "Unknown") != 0) {
+	if (!machvec_selected) {
 		unsigned long machvec_size;
 
 		machvec_size = ((unsigned long)&__machvec_end -
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 55ed653c7a6..6f1ea9b3337 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -47,7 +47,7 @@ struct sh_cpuinfo boot_cpu_data = { CPU_SH_NONE, 10000000, };
  * The machine vector. First entry in .machvec.init, or clobbered by
  * sh_mv= on the command line, prior to .machvec.init teardown.
  */
-struct sh_machine_vector sh_mv = { .mv_name = "Unknown", };
+struct sh_machine_vector sh_mv = { .mv_name = "generic", };
 
 #ifdef CONFIG_VT
 struct screen_info screen_info;
-- 
cgit v1.2.3


From 05627486ab7f31ea09d8bb7a83582ca0185dc283 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 15 May 2007 16:25:47 +0900
Subject: sh: Fix SH-4 CPU selects.

Now that select no longer works for selecting the "closest" CPU,
we have to explicitly reference the precise sub-type in the few
places where it actually matters (presently only setup code and
some legacy sh-sci cruft).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig                 | 6 +++---
 arch/sh/kernel/cpu/sh4/Makefile | 4 ++++
 arch/sh/mm/Kconfig              | 4 ----
 3 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 6c42c8ed978..78f5f230513 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -467,13 +467,13 @@ config SH_PCLK_FREQ
 	int "Peripheral clock frequency (in Hz)"
 	default "27000000" if CPU_SUBTYPE_SH73180 || CPU_SUBTYPE_SH7343
 	default "31250000" if CPU_SUBTYPE_SH7619
+	default "32000000" if CPU_SUBTYPE_SH7722
 	default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || \
 			      CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
 			      CPU_SUBTYPE_SH7206
-	default "50000000" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7780 || \
-			      CPU_SUBTYPE_SH7785
-	default "60000000" if CPU_SUBTYPE_SH7751
+	default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
 	default "66000000" if CPU_SUBTYPE_SH4_202
+	default "50000000"
 	help
 	  This option is used to specify the peripheral clock frequency.
 	  This is necessary for determining the reference clock value on
diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile
index 8add10bd826..dadd6bffc12 100644
--- a/arch/sh/kernel/cpu/sh4/Makefile
+++ b/arch/sh/kernel/cpu/sh4/Makefile
@@ -10,7 +10,11 @@ obj-$(CONFIG_SH_STORE_QUEUES)		+= sq.o
 
 # CPU subtype setup
 obj-$(CONFIG_CPU_SUBTYPE_SH7750)	+= setup-sh7750.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7750R)	+= setup-sh7750.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7750S)	+= setup-sh7750.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7091)	+= setup-sh7750.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7751)	+= setup-sh7750.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7751R)	+= setup-sh7750.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7760)	+= setup-sh7760.o
 obj-$(CONFIG_CPU_SUBTYPE_SH4_202)	+= setup-sh4-202.o
 
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 8f826b03f9f..00f64c41edb 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -126,7 +126,6 @@ config CPU_SUBTYPE_SH7750
 config CPU_SUBTYPE_SH7091
 	bool "Support SH7091 processor"
 	select CPU_SH4
-	select CPU_SUBTYPE_SH7750
 	help
 	  Select SH7091 if you have an SH-4 based Sega device (such as
 	  the Dreamcast, Naomi, and Naomi 2).
@@ -134,13 +133,11 @@ config CPU_SUBTYPE_SH7091
 config CPU_SUBTYPE_SH7750R
 	bool "Support SH7750R processor"
 	select CPU_SH4
-	select CPU_SUBTYPE_SH7750
 	select CPU_HAS_IPR_IRQ
 
 config CPU_SUBTYPE_SH7750S
 	bool "Support SH7750S processor"
 	select CPU_SH4
-	select CPU_SUBTYPE_SH7750
 	select CPU_HAS_IPR_IRQ
 
 config CPU_SUBTYPE_SH7751
@@ -154,7 +151,6 @@ config CPU_SUBTYPE_SH7751
 config CPU_SUBTYPE_SH7751R
 	bool "Support SH7751R processor"
 	select CPU_SH4
-	select CPU_SUBTYPE_SH7751
 	select CPU_HAS_IPR_IRQ
 
 config CPU_SUBTYPE_SH7760
-- 
cgit v1.2.3


From 3a3c60fc0b4c2e3e6f037f68c84ddd9468b2a196 Mon Sep 17 00:00:00 2001
From: Takashi YOSHII <takashi.yoshii.ze@hitachi.com>
Date: Wed, 23 May 2007 12:34:13 +0900
Subject: sh: Align .machvec.init section on a 4-byte boundary.

.machvec.init can be misaligned with the recent machvec changes,
forcibly align it on the boundary that it expects, as before.

Signed-off-by: Takashi YOSHII <takashi.yoshii.ze@hitachi.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/vmlinux.lds.S | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index f437a4f06da..992c25ad377 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -97,6 +97,7 @@ SECTIONS
   __initramfs_end = .;
 #endif
 
+ . = ALIGN(4);
   __machvec_start = .;
   .machvec.init : { *(.machvec.init) }
   __machvec_end = .;
-- 
cgit v1.2.3


From 678597be5e116516e9cfa806fc6ea6eb5de77d8f Mon Sep 17 00:00:00 2001
From: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date: Wed, 23 May 2007 12:56:24 +0900
Subject: sh: Add L-BOX RE2 to mach-types.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/tools/mach-types | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/sh')

diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index fb40f188aff..8ae43f8c085 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -34,3 +34,4 @@ R7785RP			SH_R7785RP
 TITAN			SH_TITAN
 SHMIN			SH_SHMIN
 7710VOIPGW		SH_7710VOIPGW
+LBOXRE2			SH_LBOX_RE2
-- 
cgit v1.2.3


From dfbb9042801eaeb4df9015bb86224291a39a0f52 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 23 May 2007 17:48:36 +0900
Subject: sh: sparsemem support.

This implements basic sparsemem support for SH. Presently this only
uses static sparsemem, and we still permit explicit selection of
flatmem. Those boards that want sparsemem can select it as usual.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/setup.c |  8 ++++++--
 arch/sh/mm/Kconfig     | 10 ++++++++++
 arch/sh/mm/init.c      | 29 ++++++-----------------------
 3 files changed, 22 insertions(+), 25 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 6f1ea9b3337..3241a6274b8 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -128,6 +128,7 @@ void __init setup_bootmem_allocator(unsigned long start_pfn)
 	bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn,
 					 min_low_pfn, max_low_pfn);
 
+	add_active_range(0, min_low_pfn, max_low_pfn);
 	register_bootmem_low_pages();
 
 	node_set_online(0);
@@ -192,6 +193,7 @@ static void __init setup_memory(void)
 	 */
 	start_pfn = PFN_UP(__pa(_end));
 	setup_bootmem_allocator(start_pfn);
+	sparse_memory_present_with_active_regions(0);
 }
 #else
 extern void __init setup_memory(void);
@@ -250,8 +252,9 @@ void __init setup_arch(char **cmdline_p)
 	min_low_pfn = __MEMORY_START >> PAGE_SHIFT;
 
 	nodes_clear(node_online_map);
+
+	/* Setup bootmem with available RAM */
 	setup_memory();
-	paging_init();
 	sparse_init();
 
 #ifdef CONFIG_DUMMY_CONSOLE
@@ -261,8 +264,9 @@ void __init setup_arch(char **cmdline_p)
 	/* Perform the machine specific initialisation */
 	if (likely(sh_mv.mv_setup))
 		sh_mv.mv_setup(cmdline_p);
-}
 
+	paging_init();
+}
 
 static const char *cpu_name[] = {
 	[CPU_SH7206]	= "SH7206",	[CPU_SH7619]	= "SH7619",
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 00f64c41edb..46fd212b3ed 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -300,6 +300,13 @@ config NODES_SHIFT
 config ARCH_FLATMEM_ENABLE
 	def_bool y
 
+config ARCH_SPARSEMEM_ENABLE
+	def_bool y
+	select SPARSEMEM_STATIC
+
+config ARCH_SPARSEMEM_DEFAULT
+	def_bool y
+
 config MAX_ACTIVE_REGIONS
 	int
 	default "1"
@@ -307,6 +314,9 @@ config MAX_ACTIVE_REGIONS
 config ARCH_POPULATES_NODE_MAP
 	def_bool y
 
+config ARCH_SELECT_MEMORY_MODEL
+	def_bool y
+
 choice
 	prompt "Kernel page size"
 	default PAGE_SIZE_4KB
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index e0e644ff320..1589466f9f8 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -36,14 +36,11 @@ void show_mem(void)
 	show_free_areas();
 
 	for_each_online_pgdat(pgdat) {
-		struct page *page, *end;
-		unsigned long flags;
+		unsigned long flags, i;
 
 		pgdat_resize_lock(pgdat, &flags);
-		page = pgdat->node_mem_map;
-		end = page + pgdat->node_spanned_pages;
-
-		do {
+		for (i = 0; i < pgdat->node_spanned_pages; i++) {
+			struct page *page = pgdat_page_nr(pgdat, i);
 			total++;
 			if (PageReserved(page))
 				reserved++;
@@ -55,9 +52,7 @@ void show_mem(void)
 				free++;
 			else
 				shared += page_count(page) - 1;
-			page++;
-		} while (page < end);
-
+		}
 		pgdat_resize_unlock(pgdat, &flags);
 	}
 
@@ -169,15 +164,11 @@ void __init paging_init(void)
 		low = pgdat->bdata->node_low_pfn;
 
 		max_zone_pfns[ZONE_NORMAL] = low;
-		add_active_range(nid, start_pfn, low);
 
 		printk("Node %u: start_pfn = 0x%lx, low = 0x%lx\n",
 		       nid, start_pfn, low);
 
 		free_area_init_nodes(max_zone_pfns);
-
-		printk("Node %u: mem_map starts at %p\n",
-		       pgdat->node_id, pgdat->node_mem_map);
 	}
 }
 
@@ -185,16 +176,13 @@ static struct kcore_list kcore_mem, kcore_vmalloc;
 
 void __init mem_init(void)
 {
-	int codesize, reservedpages, datasize, initsize;
+	int codesize, datasize, initsize;
 	int nid;
 
-	reservedpages = 0;
-
 	for_each_online_node(nid) {
 		pg_data_t *pgdat = NODE_DATA(nid);
 		unsigned long node_pages = 0;
 		void *node_high_memory;
-		int i;
 
 		num_physpages += pgdat->node_present_pages;
 
@@ -203,10 +191,6 @@ void __init mem_init(void)
 
 		totalram_pages += node_pages;
 
-		for (i = 0; i < node_pages; i++)
-			if (PageReserved(pgdat->node_mem_map + i))
-				reservedpages++;
-
 		node_high_memory = (void *)((pgdat->node_start_pfn +
 					     pgdat->node_spanned_pages) <<
 						PAGE_SHIFT);
@@ -239,11 +223,10 @@ void __init mem_init(void)
 		   VMALLOC_END - VMALLOC_START);
 
 	printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, "
-	       "%dk reserved, %dk data, %dk init)\n",
+	       "%dk data, %dk init)\n",
 		(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
 		totalram_pages << (PAGE_SHIFT-10),
 		codesize >> 10,
-		reservedpages << (PAGE_SHIFT-10),
 		datasize >> 10,
 		initsize >> 10);
 
-- 
cgit v1.2.3


From 91e656aacf52bcd3fbd199462032efec915fb654 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 1 Jun 2007 14:19:22 +0900
Subject: sh: Allow for bootmem debug support.

Handy for debugging bootmem troubles.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig.debug | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch/sh')

diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index b56307294b6..d849d47d6af 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -52,6 +52,10 @@ config EARLY_PRINTK
 	  select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using
 	  the kernel command line option to toggle back and forth.
 
+config DEBUG_BOOTMEM
+	depends on DEBUG_KERNEL
+	bool "Debug BOOTMEM initialization"
+
 config DEBUG_STACKOVERFLOW
 	bool "Check for stack overflows"
 	depends on DEBUG_KERNEL
-- 
cgit v1.2.3


From d22d9b3a1d129349518c807e7997922f869e1f48 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 1 Jun 2007 14:21:13 +0900
Subject: sh: Register multiple nodes in topology_init().

If we have multiple nodes, register these at topology_init() time.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/topology.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c
index 8a4664c0ab5..9687b02caf4 100644
--- a/arch/sh/kernel/topology.c
+++ b/arch/sh/kernel/topology.c
@@ -2,6 +2,8 @@
 #include <linux/cpumask.h>
 #include <linux/init.h>
 #include <linux/percpu.h>
+#include <linux/node.h>
+#include <linux/nodemask.h>
 
 static DEFINE_PER_CPU(struct cpu, cpu_devices);
 
@@ -9,6 +11,11 @@ static int __init topology_init(void)
 {
 	int i, ret;
 
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+	for_each_online_node(i)
+		register_one_node(i);
+#endif
+
 	for_each_present_cpu(i) {
 		ret = register_cpu(&per_cpu(cpu_devices, i), i);
 		if (unlikely(ret))
-- 
cgit v1.2.3


From 2826fa61c13716816c7ae658b8f1c5a4a505d8ac Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 1 Jun 2007 17:04:36 +0900
Subject: sh: Mark sparsemem regions present earlier.

We have to call in to sparse_memory_present_with_active_regions()
earlier in order for sparsemem to be happy. This was being called
too late, and was causing troubles with the platforms that needed
to enable sparsemem.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/setup.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 3241a6274b8..c2c6bfdf4df 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -116,7 +116,7 @@ static void __init register_bootmem_low_pages(void)
 	free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(pages));
 }
 
-void __init setup_bootmem_allocator(unsigned long start_pfn)
+void __init setup_bootmem_allocator(unsigned long free_pfn)
 {
 	unsigned long bootmap_size;
 
@@ -125,7 +125,7 @@ void __init setup_bootmem_allocator(unsigned long start_pfn)
 	 * bootstrap step all allocations (until the page allocator
 	 * is intact) must be done via bootmem_alloc().
 	 */
-	bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn,
+	bootmap_size = init_bootmem_node(NODE_DATA(0), free_pfn,
 					 min_low_pfn, max_low_pfn);
 
 	add_active_range(0, min_low_pfn, max_low_pfn);
@@ -141,7 +141,7 @@ void __init setup_bootmem_allocator(unsigned long start_pfn)
 	 * an invalid RAM area.
 	 */
 	reserve_bootmem(__MEMORY_START+PAGE_SIZE,
-		(PFN_PHYS(start_pfn)+bootmap_size+PAGE_SIZE-1)-__MEMORY_START);
+		(PFN_PHYS(free_pfn)+bootmap_size+PAGE_SIZE-1)-__MEMORY_START);
 
 	/*
 	 * reserve physical page 0 - it's a special BIOS page on many boxes,
@@ -149,6 +149,8 @@ void __init setup_bootmem_allocator(unsigned long start_pfn)
 	 */
 	reserve_bootmem(__MEMORY_START, PAGE_SIZE);
 
+	sparse_memory_present_with_active_regions(0);
+
 #ifdef CONFIG_BLK_DEV_INITRD
 	ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0);
 	if (&__rd_start != &__rd_end) {
@@ -193,7 +195,6 @@ static void __init setup_memory(void)
 	 */
 	start_pfn = PFN_UP(__pa(_end));
 	setup_bootmem_allocator(start_pfn);
-	sparse_memory_present_with_active_regions(0);
 }
 #else
 extern void __init setup_memory(void);
-- 
cgit v1.2.3


From fa1ec92e1dcd4fa4be23db24e4c019c0e4194c89 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 1 Jun 2007 17:23:14 +0900
Subject: sh: Enable IPR-IRQ for SH7206.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/sh')

diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 46fd212b3ed..955a851c0c7 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -58,6 +58,7 @@ config CPU_SUBTYPE_SH7619
 config CPU_SUBTYPE_SH7206
 	bool "Support SH7206 processor"
 	select CPU_SH2A
+	select CPU_HAS_IPR_IRQ
 
 # SH-3 Processor Support
 
-- 
cgit v1.2.3


From 6240d92f2f2fb74094b66b3510733fa0a1e2631a Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 1 Jun 2007 17:25:42 +0900
Subject: sh: Wrap CPU tuning through cc-option.

Some compilers don't support the explicit CPU tuning, while binutils
is still able to handle the special subtype-specific opcodes. Make
the CFLAG optional, falling back on the compiler default if nothing
better exists.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Makefile | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index ec2d82eda90..aa76167ceb4 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -34,12 +34,14 @@ isa-y			:= $(isa-y)-nofpu
 endif
 endif
 
-cflags-$(CONFIG_CPU_SH2)		:= -m2
-cflags-$(CONFIG_CPU_SH2A)		:= -m2a $(call cc-option,-m2a-nofpu,)
-cflags-$(CONFIG_CPU_SH3)		:= -m3
-cflags-$(CONFIG_CPU_SH4)		:= -m4 \
+cflags-$(CONFIG_CPU_SH2)		:= $(call cc-option,-m2,)
+cflags-$(CONFIG_CPU_SH2A)		:= $(call cc-option,-m2a,) \
+					   $(call cc-option,-m2a-nofpu,)
+cflags-$(CONFIG_CPU_SH3)		:= $(call cc-option,-m3,)
+cflags-$(CONFIG_CPU_SH4)		:= $(call cc-option,-m4,) \
 	$(call cc-option,-mno-implicit-fp,-m4-nofpu)
-cflags-$(CONFIG_CPU_SH4A)		:= $(call cc-option,-m4a,) $(call cc-option,-m4a-nofpu,)
+cflags-$(CONFIG_CPU_SH4A)		:= $(call cc-option,-m4a,) \
+					   $(call cc-option,-m4a-nofpu,)
 
 cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= -mb
 cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -ml
-- 
cgit v1.2.3


From b66d51cb8039cf80b8aa5b157ed055cdea811104 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 1 Jun 2007 17:26:13 +0900
Subject: sh: Tidy compiler warnings for SH-2A build.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/signal.c | 1 +
 arch/sh/kernel/traps.c  | 1 -
 2 files changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/signal.c b/arch/sh/kernel/signal.c
index 4fc5b402b21..2d9131fbc69 100644
--- a/arch/sh/kernel/signal.c
+++ b/arch/sh/kernel/signal.c
@@ -23,6 +23,7 @@
 #include <linux/personality.h>
 #include <linux/binfmts.h>
 #include <linux/freezer.h>
+#include <linux/io.h>
 #include <asm/system.h>
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
index 9c7fb922dfe..b97e71dae57 100644
--- a/arch/sh/kernel/traps.c
+++ b/arch/sh/kernel/traps.c
@@ -642,7 +642,6 @@ asmlinkage void do_divide_error(unsigned long r4, unsigned long r5,
 				unsigned long r6, unsigned long r7,
 				struct pt_regs __regs)
 {
-	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
 	siginfo_t info;
 
 	switch (r4) {
-- 
cgit v1.2.3


From f11b71e6578fbe8e059c51f5d2de223a3804507a Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 4 Jun 2007 14:37:04 +0900
Subject: sh: Wire up mempolicy syscalls.

Wire up mbind and get/set_mempolicy() in their reserved places.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/syscalls.S | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/syscalls.S b/arch/sh/kernel/syscalls.S
index 7db1c2dc599..ff5656e60c0 100644
--- a/arch/sh/kernel/syscalls.S
+++ b/arch/sh/kernel/syscalls.S
@@ -308,9 +308,9 @@ ENTRY(sys_call_table)
 	.long sys_utimes
  	.long sys_fadvise64_64_wrapper
 	.long sys_ni_syscall	/* Reserved for vserver */
-	.long sys_ni_syscall	/* Reserved for mbind */
-	.long sys_ni_syscall	/* 275 - get_mempolicy */
-	.long sys_ni_syscall	/* set_mempolicy */
+	.long sys_mbind
+	.long sys_get_mempolicy		/* 275 */
+	.long sys_set_mempolicy
 	.long sys_mq_open
 	.long sys_mq_unlink
 	.long sys_mq_timedsend
-- 
cgit v1.2.3


From 2de212ebd8d5c1a17e40bffcc7e434443105c4b8 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 6 Jun 2007 12:09:54 +0900
Subject: sh: Fix up max_zone_pfns[] with multiple nodes.

Currently using multiple nodes tramples the ZONE_NORMAL
max low pfn, tidy up the logic a bit to get it all working
as expected.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/init.c | 29 +++++++++++++++++------------
 1 file changed, 17 insertions(+), 12 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 1589466f9f8..2032b39c229 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -142,6 +142,7 @@ extern char __init_begin, __init_end;
  */
 void __init paging_init(void)
 {
+	unsigned long max_zone_pfns[MAX_NR_ZONES];
 	int nid;
 
 	/* We don't need to map the kernel through the TLB, as
@@ -153,23 +154,23 @@ void __init paging_init(void)
 	 * check for a null value. */
 	set_TTB(swapper_pg_dir);
 
+	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+
 	for_each_online_node(nid) {
 		pg_data_t *pgdat = NODE_DATA(nid);
-		unsigned long max_zone_pfns[MAX_NR_ZONES];
 		unsigned long low, start_pfn;
 
-		memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
-
 		start_pfn = pgdat->bdata->node_boot_start >> PAGE_SHIFT;
 		low = pgdat->bdata->node_low_pfn;
 
-		max_zone_pfns[ZONE_NORMAL] = low;
+		if (max_zone_pfns[ZONE_NORMAL] < low)
+			max_zone_pfns[ZONE_NORMAL] = low;
 
 		printk("Node %u: start_pfn = 0x%lx, low = 0x%lx\n",
 		       nid, start_pfn, low);
-
-		free_area_init_nodes(max_zone_pfns);
 	}
+
+	free_area_init_nodes(max_zone_pfns);
 }
 
 static struct kcore_list kcore_mem, kcore_vmalloc;
@@ -179,6 +180,9 @@ void __init mem_init(void)
 	int codesize, datasize, initsize;
 	int nid;
 
+	num_physpages = 0;
+	high_memory = NULL;
+
 	for_each_online_node(nid) {
 		pg_data_t *pgdat = NODE_DATA(nid);
 		unsigned long node_pages = 0;
@@ -191,9 +195,9 @@ void __init mem_init(void)
 
 		totalram_pages += node_pages;
 
-		node_high_memory = (void *)((pgdat->node_start_pfn +
-					     pgdat->node_spanned_pages) <<
-						PAGE_SHIFT);
+		node_high_memory = (void *)__va((pgdat->node_start_pfn +
+						 pgdat->node_spanned_pages) <<
+						 PAGE_SHIFT);
 		if (node_high_memory > high_memory)
 			high_memory = node_high_memory;
 	}
@@ -225,7 +229,7 @@ void __init mem_init(void)
 	printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, "
 	       "%dk data, %dk init)\n",
 		(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
-		totalram_pages << (PAGE_SHIFT-10),
+		num_physpages << (PAGE_SHIFT-10),
 		codesize >> 10,
 		datasize >> 10,
 		initsize >> 10);
@@ -247,7 +251,8 @@ void free_initmem(void)
 		free_page(addr);
 		totalram_pages++;
 	}
-	printk ("Freeing unused kernel memory: %dk freed\n", (&__init_end - &__init_begin) >> 10);
+	printk("Freeing unused kernel memory: %dk freed\n",
+	       (&__init_end - &__init_begin) >> 10);
 }
 
 #ifdef CONFIG_BLK_DEV_INITRD
@@ -260,6 +265,6 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 		free_page(p);
 		totalram_pages++;
 	}
-	printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
+	printk("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
 }
 #endif
-- 
cgit v1.2.3


From 07cbb41b5308b92f29649254ff755e48ea60e24c Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 6 Jun 2007 12:23:06 +0900
Subject: sh: Use asm/sections.h for linker section symbols.

Kill off a bunch of externs, and use sections.h instead..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/init.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 2032b39c229..753e11d5e62 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -18,6 +18,7 @@
 #include <asm/mmu_context.h>
 #include <asm/tlb.h>
 #include <asm/cacheflush.h>
+#include <asm/sections.h>
 #include <asm/cache.h>
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
@@ -132,11 +133,6 @@ void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot)
 }
 #endif	/* CONFIG_MMU */
 
-/* References to section boundaries */
-
-extern char _text, _etext, _edata, __bss_start, _end;
-extern char __init_begin, __init_end;
-
 /*
  * paging_init() sets up the page tables
  */
@@ -251,8 +247,9 @@ void free_initmem(void)
 		free_page(addr);
 		totalram_pages++;
 	}
-	printk("Freeing unused kernel memory: %dk freed\n",
-	       (&__init_end - &__init_begin) >> 10);
+	printk("Freeing unused kernel memory: %ldk freed\n",
+	       ((unsigned long)&__init_end -
+	        (unsigned long)&__init_begin) >> 10);
 }
 
 #ifdef CONFIG_BLK_DEV_INITRD
-- 
cgit v1.2.3


From b241cb0c885e55839fb0f93c6a4539c5416cc39f Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 6 Jun 2007 17:52:19 +0900
Subject: sh: Support for multiple nodes.

This adds basic support for multiple nodes on SH machines.
This is primarily useful for boards with many different
memory blocks that are otherwise unused (SH7722/SH7785 URAM
and so forth).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/Kconfig  | 11 +++++++
 arch/sh/mm/Makefile |  1 +
 arch/sh/mm/numa.c   | 92 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 104 insertions(+)
 create mode 100644 arch/sh/mm/numa.c

(limited to 'arch/sh')

diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 955a851c0c7..8c5b73ab477 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -293,6 +293,17 @@ config VSYSCALL
 	  For systems with an MMU that can afford to give up a page,
 	  (the default value) say Y.
 
+config NUMA
+	bool "Non Uniform Memory Access (NUMA) Support"
+	depends on MMU && EXPERIMENTAL
+	default n
+	help
+	  Some SH systems have many various memories scattered around
+	  the address space, each with varying latencies. This enables
+	  support for these blocks by binding them to nodes and allowing
+	  memory policies to be used for prioritizing and controlling
+	  allocation behaviour.
+
 config NODES_SHIFT
 	int
 	default "1"
diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile
index 3ffd7f68c0a..47c330c528d 100644
--- a/arch/sh/mm/Makefile
+++ b/arch/sh/mm/Makefile
@@ -29,3 +29,4 @@ endif
 
 obj-$(CONFIG_SH7705_CACHE_32KB)	+= cache-sh7705.o
 obj-$(CONFIG_32BIT)		+= pmb.o
+obj-$(CONFIG_NUMA)		+= numa.o
diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c
new file mode 100644
index 00000000000..8aff065dd30
--- /dev/null
+++ b/arch/sh/mm/numa.c
@@ -0,0 +1,92 @@
+/*
+ * arch/sh/mm/numa.c - Multiple node support for SH machines
+ *
+ *  Copyright (C) 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/module.h>
+#include <linux/bootmem.h>
+#include <linux/mm.h>
+#include <linux/numa.h>
+#include <linux/pfn.h>
+#include <asm/sections.h>
+
+static bootmem_data_t plat_node_bdata[MAX_NUMNODES];
+struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
+EXPORT_SYMBOL_GPL(node_data);
+
+/*
+ * On SH machines the conventional approach is to stash system RAM
+ * in node 0, and other memory blocks in to node 1 and up, ordered by
+ * latency. Each node's pgdat is node-local at the beginning of the node,
+ * immediately followed by the node mem map.
+ */
+void __init setup_memory(void)
+{
+	unsigned long free_pfn = PFN_UP(__pa(_end));
+
+	/*
+	 * Node 0 sets up its pgdat at the first available pfn,
+	 * and bumps it up before setting up the bootmem allocator.
+	 */
+	NODE_DATA(0) = pfn_to_kaddr(free_pfn);
+	memset(NODE_DATA(0), 0, sizeof(struct pglist_data));
+	free_pfn += PFN_UP(sizeof(struct pglist_data));
+	NODE_DATA(0)->bdata = &plat_node_bdata[0];
+
+	/* Set up node 0 */
+	setup_bootmem_allocator(free_pfn);
+
+	/* Give the platforms a chance to hook up their nodes */
+	plat_mem_setup();
+}
+
+void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
+{
+	unsigned long bootmap_pages, bootmap_start, bootmap_size;
+	unsigned long start_pfn, free_pfn, end_pfn;
+
+	/* Don't allow bogus node assignment */
+	BUG_ON(nid > MAX_NUMNODES || nid == 0);
+
+	/*
+	 * The free pfn starts at the beginning of the range, and is
+	 * advanced as necessary for pgdat and node map allocations.
+	 */
+	free_pfn = start_pfn = start >> PAGE_SHIFT;
+	end_pfn = end >> PAGE_SHIFT;
+
+	add_active_range(nid, start_pfn, end_pfn);
+
+	/* Node-local pgdat */
+	NODE_DATA(nid) = pfn_to_kaddr(free_pfn);
+	free_pfn += PFN_UP(sizeof(struct pglist_data));
+	memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
+
+	NODE_DATA(nid)->bdata = &plat_node_bdata[nid];
+	NODE_DATA(nid)->node_start_pfn = start_pfn;
+	NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
+
+	/* Node-local bootmap */
+	bootmap_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
+	bootmap_start = (unsigned long)pfn_to_kaddr(free_pfn);
+	bootmap_size = init_bootmem_node(NODE_DATA(nid), free_pfn, start_pfn,
+				    end_pfn);
+
+	free_bootmem_with_active_regions(nid, end_pfn);
+
+	/* Reserve the pgdat and bootmap space with the bootmem allocator */
+	reserve_bootmem_node(NODE_DATA(nid), start_pfn << PAGE_SHIFT,
+			     sizeof(struct pglist_data));
+	reserve_bootmem_node(NODE_DATA(nid), free_pfn << PAGE_SHIFT,
+			     bootmap_pages << PAGE_SHIFT);
+
+	/* It's up */
+	node_set_online(nid);
+
+	/* Kick sparsemem */
+	sparse_memory_present_with_active_regions(nid);
+}
-- 
cgit v1.2.3


From 520588f47f20a6dcaf81655e1da378e5fe6d5015 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 6 Jun 2007 17:58:56 +0900
Subject: sh: URAM node support for SH7722.

This adds the URAM block on SH7722 as a separate node.
Sparsemem is required for this, or it can simply be disabled
by explicitly selecting a flatmem model.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 9 ++++++++-
 arch/sh/mm/Kconfig                     | 2 ++
 2 files changed, 10 insertions(+), 1 deletion(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 1143fbf65fa..82dba7ff24b 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -1,7 +1,7 @@
 /*
  * SH7722 Setup
  *
- *  Copyright (C) 2006  Paul Mundt
+ *  Copyright (C) 2006 - 2007  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -10,6 +10,7 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
+#include <linux/mm.h>
 #include <asm/sci.h>
 
 static struct plat_sci_port sci_platform_data[] = {
@@ -78,3 +79,9 @@ void __init init_IRQ_ipr(void)
 {
 	make_ipr_irq(sh7722_ipr_map, ARRAY_SIZE(sh7722_ipr_map));
 }
+
+void __init plat_mem_setup(void)
+{
+	/* Register the URAM space as Node 1 */
+	setup_bootmem_node(1, 0x055f0000, 0x05610000);
+}
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 8c5b73ab477..dd9b226c5d4 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -211,6 +211,7 @@ config CPU_SUBTYPE_SH7722
 	select CPU_SH4AL_DSP
 	select CPU_SHX2
 	select CPU_HAS_IPR_IRQ
+	select ARCH_SPARSEMEM_ENABLE
 
 endchoice
 
@@ -321,6 +322,7 @@ config ARCH_SPARSEMEM_DEFAULT
 
 config MAX_ACTIVE_REGIONS
 	int
+	default "2" if (CPU_SUBTYPE_SH7722 && SPARSEMEM)
 	default "1"
 
 config ARCH_POPULATES_NODE_MAP
-- 
cgit v1.2.3


From 1300b1b1776475cd94685f5f61b83f84801e08e9 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 6 Jun 2007 19:04:22 +0900
Subject: sh: Make NUMA depend on sparsemem.

The only platforms that are supporting NUMA are doing so via
sparsemem, so update the dependency.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/sh')

diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index dd9b226c5d4..c713d13fcca 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -296,7 +296,7 @@ config VSYSCALL
 
 config NUMA
 	bool "Non Uniform Memory Access (NUMA) Support"
-	depends on MMU && EXPERIMENTAL
+	depends on MMU && SPARSEMEM && EXPERIMENTAL
 	default n
 	help
 	  Some SH systems have many various memories scattered around
-- 
cgit v1.2.3


From 5bbeafca8d5c64b6d9c6653993492d763be0918f Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 6 Jun 2007 19:05:11 +0900
Subject: sh: Fix the SH7722 flatmem build.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 82dba7ff24b..fa07fab4797 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/mm.h>
+#include <asm/mmzone.h>
 #include <asm/sci.h>
 
 static struct plat_sci_port sci_platform_data[] = {
-- 
cgit v1.2.3


From 05a117847b43d44f336bbf272a1063661431a5e5 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 7 Jun 2007 11:29:37 +0900
Subject: sh: Fix up cpu to node mapping in sysfs.

Currently cpu_to_node() is always 0 in the UP case, though
we do want to have the CPU association linked in under sysfs
even in the cases where we're only on a single CPU.

Fix this up, so we have the cpu0 link on all of the available
nodes that don't already have a CPU link of their own.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/topology.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c
index 9687b02caf4..9b5844a1bda 100644
--- a/arch/sh/kernel/topology.c
+++ b/arch/sh/kernel/topology.c
@@ -1,3 +1,12 @@
+/*
+ * arch/sh/kernel/topology.c
+ *
+ *  Copyright (C) 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
 #include <linux/cpu.h>
 #include <linux/cpumask.h>
 #include <linux/init.h>
@@ -23,6 +32,18 @@ static int __init topology_init(void)
 			       __FUNCTION__, i, ret);
 	}
 
+#if defined(CONFIG_NUMA) && !defined(CONFIG_SMP)
+	/*
+	 * In the UP case, make sure the CPU association is still
+	 * registered under each node. Without this, sysfs fails
+	 * to make the connection between nodes other than node0
+	 * and cpu0.
+	 */
+	for_each_online_node(i)
+		if (i != numa_node_id())
+			register_cpu_under_node(raw_smp_processor_id(), i);
+#endif
+
 	return 0;
 }
 subsys_initcall(topology_init);
-- 
cgit v1.2.3


From 33d63bd83bf9aa6b662a376a96b825acba721e8f Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 7 Jun 2007 11:32:52 +0900
Subject: sh: memory hot-add for sparsemem users support.

This enables simple hotplug support for sparsemem users. Presently
this only permits memory being added in to node 0 on ZONE_NORMAL.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/Kconfig |  8 ++++++++
 arch/sh/mm/init.c  | 42 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 50 insertions(+)

(limited to 'arch/sh')

diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index c713d13fcca..0c24abdd4ea 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -331,6 +331,14 @@ config ARCH_POPULATES_NODE_MAP
 config ARCH_SELECT_MEMORY_MODEL
 	def_bool y
 
+config ARCH_ENABLE_MEMORY_HOTPLUG
+	def_bool y
+	depends on SPARSEMEM
+
+config ARCH_MEMORY_PROBE
+	def_bool y
+	depends on MEMORY_HOTPLUG
+
 choice
 	prompt "Kernel page size"
 	default PAGE_SIZE_4KB
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 753e11d5e62..40d4e798e7f 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -265,3 +265,45 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 	printk("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
 }
 #endif
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+void online_page(struct page *page)
+{
+	ClearPageReserved(page);
+	init_page_count(page);
+	__free_page(page);
+	totalram_pages++;
+	num_physpages++;
+}
+
+int arch_add_memory(int nid, u64 start, u64 size)
+{
+	pg_data_t *pgdat;
+	unsigned long start_pfn = start >> PAGE_SHIFT;
+	unsigned long nr_pages = size >> PAGE_SHIFT;
+	int ret;
+
+	pgdat = NODE_DATA(nid);
+
+	/* We only have ZONE_NORMAL, so this is easy.. */
+	ret = __add_pages(pgdat->node_zones + ZONE_NORMAL, start_pfn, nr_pages);
+	if (unlikely(ret))
+		printk("%s: Failed, __add_pages() == %d\n", __FUNCTION__, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(arch_add_memory);
+
+int remove_memory(u64 start, u64 size)
+{
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(remove_memory);
+
+int memory_add_physaddr_to_nid(u64 addr)
+{
+	/* Node 0 for now.. */
+	return 0;
+}
+EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
+#endif
-- 
cgit v1.2.3


From b9601c5e59dd25693345558a301e833741bf5874 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 8 Jun 2007 11:55:28 +0900
Subject: sh: Kill off dead SH7604 support.

This was added during 2.5.x, but was never moved along. This
can easily be resurrected if someone has one they wish to work
with, but it's not worth keeping around in its current form.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Makefile               |   1 -
 arch/sh/boards/saturn/Makefile |   8 ---
 arch/sh/boards/saturn/io.c     |  26 ---------
 arch/sh/boards/saturn/irq.c    | 118 -----------------------------------------
 arch/sh/boards/saturn/setup.c  |  30 -----------
 arch/sh/boards/saturn/smp.c    |  68 ------------------------
 arch/sh/kernel/cpu/sh2/probe.c |  10 +---
 arch/sh/kernel/setup.c         |   2 +-
 arch/sh/mm/Kconfig             |   4 --
 arch/sh/tools/mach-types       |   1 -
 10 files changed, 2 insertions(+), 266 deletions(-)
 delete mode 100644 arch/sh/boards/saturn/Makefile
 delete mode 100644 arch/sh/boards/saturn/io.c
 delete mode 100644 arch/sh/boards/saturn/irq.c
 delete mode 100644 arch/sh/boards/saturn/setup.c
 delete mode 100644 arch/sh/boards/saturn/smp.c

(limited to 'arch/sh')

diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index aa76167ceb4..6e1e17467a4 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -97,7 +97,6 @@ machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE)	+= se/7300
 machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE)	+= se/7343
 machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE)	+= se/73180
 machdir-$(CONFIG_SH_HP6XX)			+= hp6xx
-machdir-$(CONFIG_SH_SATURN)			+= saturn
 machdir-$(CONFIG_SH_DREAMCAST)			+= dreamcast
 machdir-$(CONFIG_SH_MPC1211)			+= mpc1211
 machdir-$(CONFIG_SH_SH03)			+= sh03
diff --git a/arch/sh/boards/saturn/Makefile b/arch/sh/boards/saturn/Makefile
deleted file mode 100644
index 75a3042e252..00000000000
--- a/arch/sh/boards/saturn/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the Sega Saturn specific parts of the kernel
-#
-
-obj-y	 := setup.o io.o irq.o
-
-obj-$(CONFIG_SMP) += smp.o
-
diff --git a/arch/sh/boards/saturn/io.c b/arch/sh/boards/saturn/io.c
deleted file mode 100644
index c6e4f7f2e68..00000000000
--- a/arch/sh/boards/saturn/io.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/sh/boards/saturn/io.c
- *
- * I/O routines for the Sega Saturn.
- *
- * Copyright (C) 2002 Paul Mundt
- *
- * Released under the terms of the GNU GPL v2.0.
- */
-#include <asm/saturn/io.h>
-#include <asm/machvec.h>
-
-unsigned long saturn_isa_port2addr(unsigned long offset)
-{
-	return offset;
-}
-
-void *saturn_ioremap(unsigned long offset, unsigned long size)
-{
-	return (void *)offset;
-}
-
-void saturn_iounmap(void *addr)
-{
-}
-
diff --git a/arch/sh/boards/saturn/irq.c b/arch/sh/boards/saturn/irq.c
deleted file mode 100644
index 15d1d3f0f78..00000000000
--- a/arch/sh/boards/saturn/irq.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * arch/sh/boards/saturn/irq.c
- *
- * Copyright (C) 2002 Paul Mundt
- *
- * Released under the terms of the GNU GPL v2.0.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-/*
- * Interrupts map out as follows:
- *
- *  Vector	Name		Mask
- *
- * 	64	VBLANKIN	0x0001
- * 	65	VBLANKOUT	0x0002
- *	66	HBLANKIN	0x0004
- *	67	TIMER0		0x0008
- *	68	TIMER1		0x0010
- *	69	DSPEND		0x0020
- *	70	SOUNDREQUEST	0x0040
- *	71	SYSTEMMANAGER	0x0080
- *	72	PAD		0x0100
- *	73	LEVEL2DMAEND	0x0200
- *	74	LEVEL1DMAEND	0x0400
- *	75	LEVEL0DMAEND	0x0800
- *	76	DMAILLEGAL	0x1000
- *	77	SRITEDRAWEND	0x2000
- *	78	ABUS		0x8000
- *
- */
-#define SATURN_IRQ_MIN		64	/* VBLANKIN */
-#define SATURN_IRQ_MAX		78	/* ABUS */
-
-#define SATURN_IRQ_MASK		0xbfff
-
-static inline u32 saturn_irq_mask(unsigned int irq_nr)
-{
-	u32 mask;
-
-	mask = (1 << (irq_nr - SATURN_IRQ_MIN));
-	mask <<= (irq_nr == SATURN_IRQ_MAX);
-	mask &= SATURN_IRQ_MASK;
-
-	return mask;
-}
-
-static inline void mask_saturn_irq(unsigned int irq_nr)
-{
-	u32 mask;
-
-	mask = ctrl_inl(SATURN_IMR);
-	mask |= saturn_irq_mask(irq_nr);
-	ctrl_outl(mask, SATURN_IMR);
-}
-
-static inline void unmask_saturn_irq(unsigned int irq_nr)
-{
-	u32 mask;
-
-	mask = ctrl_inl(SATURN_IMR);
-	mask &= ~saturn_irq_mask(irq_nr);
-	ctrl_outl(mask, SATURN_IMR);
-}
-
-static void disable_saturn_irq(unsigned int irq_nr)
-{
-	mask_saturn_irq(irq_nr);
-}
-
-static void enable_saturn_irq(unsigned int irq_nr)
-{
-	unmask_saturn_irq(irq_nr);
-}
-
-static void mask_and_ack_saturn_irq(unsigned int irq_nr)
-{
-	mask_saturn_irq(irq_nr);
-}
-
-static void end_saturn_irq(unsigned int irq_nr)
-{
-	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		unmask_saturn_irq(irq_nr);
-}
-
-static unsigned int startup_saturn_irq(unsigned int irq_nr)
-{
-	unmask_saturn_irq(irq_nr);
-
-	return 0;
-}
-
-static void shutdown_saturn_irq(unsigned int irq_nr)
-{
-	mask_saturn_irq(irq_nr);
-}
-
-static struct hw_interrupt_type saturn_int = {
-	.typename	= "Saturn",
-	.enable		= enable_saturn_irq,
-	.disable	= disable_saturn_irq,
-	.ack		= mask_and_ack_saturn_irq,
-	.end		= end_saturn_irq,
-	.startup	= startup_saturn_irq,
-	.shutdown	= shutdown_saturn_irq,
-};
-
-int saturn_irq_demux(int irq_nr)
-{
-	/* FIXME */
-	return irq_nr;
-}
-
diff --git a/arch/sh/boards/saturn/setup.c b/arch/sh/boards/saturn/setup.c
deleted file mode 100644
index 7df4312fbb1..00000000000
--- a/arch/sh/boards/saturn/setup.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/* 
- * arch/sh/boards/saturn/setup.c
- *
- * Hardware support for the Sega Saturn.
- *
- * Copyright (c) 2002 Paul Mundt
- *
- * Released under the terms of the GNU GPL v2.0.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <asm/mach/io.h>
-
-extern int saturn_irq_demux(int irq_nr);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_saturn __initmv = {
-	.mv_name		= "Sega Saturn",
-	.mv_nr_irqs		= 80,	/* Fix this later */
-
-	.mv_isa_port2addr	= saturn_isa_port2addr,
-	.mv_irq_demux		= saturn_irq_demux,
-
-	.mv_ioremap		= saturn_ioremap,
-	.mv_iounmap		= saturn_iounmap,
-};
diff --git a/arch/sh/boards/saturn/smp.c b/arch/sh/boards/saturn/smp.c
deleted file mode 100644
index 76460918c9c..00000000000
--- a/arch/sh/boards/saturn/smp.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* 
- * arch/sh/boards/saturn/smp.c
- *
- * SMP support for the Sega Saturn.
- *
- * Copyright (c) 2002 Paul Mundt
- *
- * Released under the terms of the GNU GPL v2.0.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-
-#include <asm/saturn/smpc.h>
-
-extern void start_secondary(void);
-
-void __smp_send_ipi(unsigned int cpu, unsigned int action)
-{
-	/* Nothing here yet .. */
-}
-
-unsigned int __smp_probe_cpus(void)
-{
-	/*
-	 * This is just a straightforward master/slave configuration,
-	 * and probing isn't really supported..
-	 */
-	return 2;
-}
-
-/*
- * We're only allowed to do byte-access to SMPC registers. In
- * addition to which, we treat them as write-only, since
- * reading from them will return undefined data.
- */
-static inline void smpc_slave_stop(unsigned int cpu)
-{
-	smpc_barrier();
-	ctrl_outb(1, SMPC_STATUS);
-
-	ctrl_outb(SMPC_CMD_SSHOFF, SMPC_COMMAND);
-	smpc_barrier();
-}
-
-static inline void smpc_slave_start(unsigned int cpu)
-{
-	ctrl_outb(1, SMPC_STATUS);
-	ctrl_outb(SMPC_CMD_SSHON, SMPC_COMMAND);
-
-	smpc_barrier();
-}
-
-void __smp_slave_init(unsigned int cpu)
-{
-	register unsigned long vbr;
-	void **entry;
-
-	__asm__ __volatile__ ("stc vbr, %0\n\t" : "=r" (vbr));
-	entry = (void **)(vbr + 0x310 + 0x94);
-
-	smpc_slave_stop(cpu);
-
-	*(void **)entry = (void *)start_secondary;
-
-	smpc_slave_start(cpu);
-}
-
diff --git a/arch/sh/kernel/cpu/sh2/probe.c b/arch/sh/kernel/cpu/sh2/probe.c
index 108e81b682e..74765ae4292 100644
--- a/arch/sh/kernel/cpu/sh2/probe.c
+++ b/arch/sh/kernel/cpu/sh2/probe.c
@@ -17,15 +17,7 @@
 
 int __init detect_cpu_and_cache_system(void)
 {
-#if defined(CONFIG_CPU_SUBTYPE_SH7604)
-	current_cpu_data.type			= CPU_SH7604;
-	current_cpu_data.dcache.ways		= 4;
-	current_cpu_data.dcache.way_incr	= (1<<10);
-	current_cpu_data.dcache.sets		= 64;
-	current_cpu_data.dcache.entry_shift	= 4;
-	current_cpu_data.dcache.linesz		= L1_CACHE_BYTES;
-	current_cpu_data.dcache.flags		= 0;
-#elif defined(CONFIG_CPU_SUBTYPE_SH7619)
+#if defined(CONFIG_CPU_SUBTYPE_SH7619)
 	current_cpu_data.type			= CPU_SH7619;
 	current_cpu_data.dcache.ways		= 4;
 	current_cpu_data.dcache.way_incr	= (1<<12);
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index c2c6bfdf4df..765f83c1bca 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -271,7 +271,7 @@ void __init setup_arch(char **cmdline_p)
 
 static const char *cpu_name[] = {
 	[CPU_SH7206]	= "SH7206",	[CPU_SH7619]	= "SH7619",
-	[CPU_SH7604]	= "SH7604",	[CPU_SH7300]	= "SH7300",
+	[CPU_SH7300]	= "SH7300",
 	[CPU_SH7705]	= "SH7705",	[CPU_SH7706]	= "SH7706",
 	[CPU_SH7707]	= "SH7707",	[CPU_SH7708]	= "SH7708",
 	[CPU_SH7709]	= "SH7709",	[CPU_SH7710]	= "SH7710",
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 0c24abdd4ea..b013a05fbc5 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -45,10 +45,6 @@ choice
 
 # SH-2 Processor Support
 
-config CPU_SUBTYPE_SH7604
-	bool "Support SH7604 processor"
-	select CPU_SH2
-
 config CPU_SUBTYPE_SH7619
 	bool "Support SH7619 processor"
 	select CPU_SH2
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 8ae43f8c085..4b5e9305092 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -18,7 +18,6 @@ SE			SH_SOLUTION_ENGINE
 HP6XX			SH_HP6XX
 HD64461			HD64461
 HD64465			HD64465
-SATURN			SH_SATURN
 DREAMCAST		SH_DREAMCAST
 MPC1211			SH_MPC1211
 SNAPGEAR		SH_SECUREEDGE5410
-- 
cgit v1.2.3


From 54039591cee40ef1f440f1245ed066c3e7d54a9a Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Date: Mon, 11 Jun 2007 10:26:56 +0900
Subject: sh: Provide a defconfig for R7780MP.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/configs/r7780mp_defconfig | 1223 +++++++++++++++++++++++++++++++++++++
 1 file changed, 1223 insertions(+)
 create mode 100644 arch/sh/configs/r7780mp_defconfig

(limited to 'arch/sh')

diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
new file mode 100644
index 00000000000..17f7402b31d
--- /dev/null
+++ b/arch/sh/configs/r7780mp_defconfig
@@ -0,0 +1,1223 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc4
+# Mon Jun 11 10:24:57 2007
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+CONFIG_CPU_SUBTYPE_SH7780=y
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+# CONFIG_32BIT is not set
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
+# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_DSP is not set
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_SPECULATIVE_EXECUTION=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_INTC2_IRQ=y
+CONFIG_CPU_HAS_SR_RB=y
+
+#
+# Board support
+#
+# CONFIG_SH_7780_SOLUTION_ENGINE is not set
+CONFIG_SH_HIGHLANDER=y
+# CONFIG_SH_R7780RP is not set
+CONFIG_SH_R7780MP=y
+# CONFIG_SH_R7785RP is not set
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_PCLK_FREQ=32000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+CONFIG_PUSH_SWITCH=y
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_BKL=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+CONFIG_SH_PCIDMA_NONCOHERENT=y
+CONFIG_PCI_AUTO=y
+CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_BLINK is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_PLATFORM=y
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_STNIC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=m
+# CONFIG_PCNET32_NAPI is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+# CONFIG_VIA_RHINE_NAPI is not set
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=m
+# CONFIG_E1000_NAPI is not set
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_R8169=y
+# CONFIG_R8169_NAPI is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+# CONFIG_SND is not set
+
+#
+# Open Sound System
+#
+CONFIG_SOUND_PRIME=m
+# CONFIG_OSS_OBSOLETE is not set
+# CONFIG_SOUND_TRIDENT is not set
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_FRAME_POINTER is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_SH_STANDARD_BIOS=y
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_BOOTMEM is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_4KSTACKS is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From 357d59469c1179c30b8c425aba302346fac3594e Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 11 Jun 2007 15:32:07 +0900
Subject: sh: Tidy up dependencies for SH-2 build.

SH-2 can presently get in to some pretty bogus states, so
we tidy up the dependencies a bit and get it all building
again.

This gets us a bit closer to a functional allyesconfig
and allmodconfig, though there are still a few things to
fix up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig                | 43 +++++++++++++++++++++++++++++++-----------
 arch/sh/Kconfig.debug          |  1 +
 arch/sh/cchips/Kconfig         |  6 +-----
 arch/sh/drivers/pci/Kconfig    |  1 +
 arch/sh/kernel/cpu/init.c      | 15 +--------------
 arch/sh/kernel/cpu/sh2/probe.c |  3 +--
 arch/sh/kernel/process.c       |  4 +---
 arch/sh/mm/Kconfig             | 16 ++++------------
 arch/sh/mm/init.c              |  2 ++
 9 files changed, 44 insertions(+), 47 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 78f5f230513..b16407c9f2c 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -55,8 +55,21 @@ config GENERIC_TIME
 config GENERIC_CLOCKEVENTS
 	def_bool n
 
+config SYS_SUPPORTS_PM
+	bool
+
 config SYS_SUPPORTS_APM_EMULATION
 	bool
+	select SYS_SUPPORTS_PM
+
+config SYS_SUPPORTS_SMP
+	bool
+
+config SYS_SUPPORTS_NUMA
+	bool
+
+config SYS_SUPPORTS_PCI
+	bool
 
 config ARCH_MAY_HAVE_PC_FDC
 	bool
@@ -102,7 +115,7 @@ endchoice
 
 config SH_FPU
 	bool "FPU support"
-	depends on !CPU_SH3
+	depends on CPU_SH4
 	default y
 	help
 	  Selecting this option will enable support for SH processors that
@@ -236,6 +249,7 @@ config SH_7751_SOLUTION_ENGINE
 config SH_7780_SOLUTION_ENGINE
 	bool "SolutionEngine7780"
 	select SOLUTION_ENGINE
+	select SYS_SUPPORTS_PCI
 	depends on CPU_SUBTYPE_SH7780
 	help
 	  Select 7780 SolutionEngine if configuring for a Renesas SH7780
@@ -275,20 +289,16 @@ config SH_7751_SYSTEMH
 config SH_HP6XX
 	bool "HP6XX"
 	select SYS_SUPPORTS_APM_EMULATION
+	select HD6446X_SERIES
 	depends on CPU_SUBTYPE_SH7709
 	help
 	  Select HP6XX if configuring for a HP jornada HP6xx.
 	  More information (hardware only) at
 	  <http://www.hp.com/jornada/>.
 
-config SH_SATURN
-	bool "Saturn"
-	depends on CPU_SUBTYPE_SH7604
-	help
-	  Select Saturn if configuring for a SEGA Saturn.
-
 config SH_DREAMCAST
 	bool "Dreamcast"
+	select SYS_SUPPORTS_PCI
 	depends on CPU_SUBTYPE_SH7091
 	help
 	  Select Dreamcast if configuring for a SEGA Dreamcast.
@@ -307,6 +317,7 @@ config SH_MPC1211
 config SH_SH03
 	bool "Interface CTP/PCI-SH03"
 	depends on CPU_SUBTYPE_SH7751 && BROKEN
+	select SYS_SUPPORTS_PCI
 	help
 	  CTP/PCI-SH03 is a CPU module computer that is produced
 	  by Interface Corporation.
@@ -315,6 +326,7 @@ config SH_SH03
 config SH_SECUREEDGE5410
 	bool "SecureEdge5410"
 	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
 	help
 	  Select SecureEdge5410 if configuring for a SnapGear SH board.
 	  This includes both the OEM SecureEdge products as well as the
@@ -337,6 +349,7 @@ config SH_7710VOIPGW
 config SH_RTS7751R2D
 	bool "RTS7751R2D"
 	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
 	help
 	  Select RTS7751R2D if configuring for a Renesas Technology
 	  Sales SH-Graphics board.
@@ -344,6 +357,7 @@ config SH_RTS7751R2D
 config SH_HIGHLANDER
 	bool "Highlander"
 	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+	select SYS_SUPPORTS_PCI
 
 config SH_EDOSK7705
 	bool "EDOSK7705"
@@ -359,12 +373,14 @@ config SH_SH4202_MICRODEV
 config SH_LANDISK
 	bool "LANDISK"
 	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
 	help
 	  I-O DATA DEVICE, INC. "LANDISK Series" support.
 
 config SH_TITAN
 	bool "TITAN"
 	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
 	help
 	  Select Titan if you are configuring for a Nimble Microsystems
 	  NetEngine NP51R.
@@ -378,6 +394,7 @@ config SH_SHMIN
 config SH_LBOX_RE2
 	bool "L-BOX RE2"
 	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
 	help
 	  Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
 
@@ -481,8 +498,10 @@ config SH_PCLK_FREQ
 
 config SH_CLK_MD
 	int "CPU Mode Pin Setting"
-	default 0
 	depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206
+	default 6 if CPU_SUBTYPE_SH7206
+	default 5 if CPU_SUBTYPE_SH7619
+	default 0
 	help
 	  MD2 - MD0 pin setting.
 
@@ -554,6 +573,7 @@ config CRASH_DUMP
 
 config SMP
 	bool "Symmetric multi-processing support"
+	depends on SYS_SUPPORTS_SMP
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -617,6 +637,7 @@ config BOOT_LINK_OFFSET
 
 config UBC_WAKEUP
 	bool "Wakeup UBC on startup"
+	depends on CPU_SH4
 	help
 	  Selecting this option will wakeup the User Break Controller (UBC) on
 	  startup. Although the UBC is left in an awake state when the processor
@@ -645,8 +666,8 @@ menu "Bus options"
 # we're not using PCMCIA, so we make it dependent on
 # PCMCIA outright. -- PFM.
 config ISA
-	bool
-	default y if PCMCIA
+	def_bool y
+	depends on PCMCIA && HD6446X_SERIES
 	help
 	  Find out whether you have ISA slots on your motherboard.  ISA is the
 	  name of a bus system, i.e. the way the CPU talks to the other stuff
@@ -701,7 +722,7 @@ source "fs/Kconfig.binfmt"
 endmenu
 
 menu "Power management options (EXPERIMENTAL)"
-depends on EXPERIMENTAL
+depends on EXPERIMENTAL && SYS_SUPPORTS_PM
 
 source kernel/power/Kconfig
 
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index d849d47d6af..52f6a99c8ec 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -86,6 +86,7 @@ config SH_KGDB
 	bool "Include KGDB kernel debugger"
 	select FRAME_POINTER
 	select DEBUG_INFO
+	depends on CPU_SH3 || CPU_SH4
 	help
 	  Include in-kernel hooks for kgdb, the Linux kernel source level
 	  debugger.  See <http://kgdb.sourceforge.net/> for more information.
diff --git a/arch/sh/cchips/Kconfig b/arch/sh/cchips/Kconfig
index 0582ca8346b..2e516e9a6ed 100644
--- a/arch/sh/cchips/Kconfig
+++ b/arch/sh/cchips/Kconfig
@@ -13,10 +13,8 @@ config VOYAGERGX
 	  are additional GPIO bits that can be used to interface to
 	  external as well.
 
-# A board must have defined HD6446X_SERIES in order to see these
 config HD6446X_SERIES
-	bool "HD6446x support"
-	default n
+	bool
 
 choice
 	prompt "HD6446x options"
@@ -25,7 +23,6 @@ choice
 
 config HD64461
 	bool "Hitachi HD64461 companion chip support"
-	depends on CPU_SUBTYPE_SH7709
 	---help---
 	  The Hitachi HD64461 provides an interface for
 	  the SH7709 CPU, supporting a LCD controller,
@@ -40,7 +37,6 @@ config HD64461
 
 config HD64465
 	bool "Hitachi HD64465 companion chip support"
-	depends on CPU_SUBTYPE_SH7750
 	---help---
 	  The Hitachi HD64465 provides an interface for
 	  the SH7750 CPU, supporting a LCD controller,
diff --git a/arch/sh/drivers/pci/Kconfig b/arch/sh/drivers/pci/Kconfig
index 6d1cbbe6745..fbc6f2c8649 100644
--- a/arch/sh/drivers/pci/Kconfig
+++ b/arch/sh/drivers/pci/Kconfig
@@ -1,5 +1,6 @@
 config PCI
 	bool "PCI support"
+	depends on SYS_SUPPORTS_PCI
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside
diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
index 6451ad63017..9172e97dc26 100644
--- a/arch/sh/kernel/cpu/init.c
+++ b/arch/sh/kernel/cpu/init.c
@@ -21,8 +21,7 @@
 #include <asm/cacheflush.h>
 #include <asm/cache.h>
 #include <asm/io.h>
-
-extern void detect_cpu_and_cache_system(void);
+#include <asm/ubc.h>
 
 /*
  * Generic wrapper for command line arguments to disable on-chip
@@ -152,15 +151,6 @@ static void __init cache_init(void)
 	flags |= CCR_CACHE_CB;
 #endif
 
-#ifdef CONFIG_SH_OCRAM
-	/* Turn on OCRAM -- halve the OC */
-	flags |= CCR_CACHE_ORA;
-	current_cpu_data.dcache.sets >>= 1;
-
-	current_cpu_data.dcache.way_size = current_cpu_data.dcache.sets *
-				    current_cpu_data.dcache.linesz;
-#endif
-
 	ctrl_outl(flags, CCR);
 	back_to_P1();
 }
@@ -269,7 +259,6 @@ asmlinkage void __init sh_cpu_init(void)
 	}
 #endif
 
-#ifdef CONFIG_UBC_WAKEUP
 	/*
 	 * Some brain-damaged loaders decided it would be a good idea to put
 	 * the UBC to sleep. This causes some issues when it comes to things
@@ -277,7 +266,5 @@ asmlinkage void __init sh_cpu_init(void)
 	 * we wake it up and hope that all is well.
 	 */
 	ubc_wakeup();
-#endif
-
 	speculative_execution_init();
 }
diff --git a/arch/sh/kernel/cpu/sh2/probe.c b/arch/sh/kernel/cpu/sh2/probe.c
index 74765ae4292..abbf17427e5 100644
--- a/arch/sh/kernel/cpu/sh2/probe.c
+++ b/arch/sh/kernel/cpu/sh2/probe.c
@@ -9,9 +9,8 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
-
-
 #include <linux/init.h>
+#include <linux/smp.h>
 #include <asm/processor.h>
 #include <asm/cache.h>
 
diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c
index 9ae3da00eaa..6334a4c54c7 100644
--- a/arch/sh/kernel/process.c
+++ b/arch/sh/kernel/process.c
@@ -320,9 +320,7 @@ static void ubc_set_tracing(int asid, unsigned long pc)
 	ctrl_outl(pc, UBC_BARA);
 
 #ifdef CONFIG_MMU
-	/* We don't have any ASID settings for the SH-2! */
-	if (current_cpu_data.type != CPU_SH7604)
-		ctrl_outb(asid, UBC_BASRA);
+	ctrl_outb(asid, UBC_BASRA);
 #endif
 
 	ctrl_outl(0, UBC_BAMRA);
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index b013a05fbc5..58bf6225d91 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -48,6 +48,7 @@ choice
 config CPU_SUBTYPE_SH7619
 	bool "Support SH7619 processor"
 	select CPU_SH2
+	select CPU_HAS_IPR_IRQ
 
 # SH-2A Processor Support
 
@@ -208,6 +209,7 @@ config CPU_SUBTYPE_SH7722
 	select CPU_SHX2
 	select CPU_HAS_IPR_IRQ
 	select ARCH_SPARSEMEM_ENABLE
+	select SYS_SUPPORTS_NUMA
 
 endchoice
 
@@ -292,7 +294,7 @@ config VSYSCALL
 
 config NUMA
 	bool "Non Uniform Memory Access (NUMA) Support"
-	depends on MMU && SPARSEMEM && EXPERIMENTAL
+	depends on MMU && SYS_SUPPORTS_NUMA && EXPERIMENTAL
 	default n
 	help
 	  Some SH systems have many various memories scattered around
@@ -308,6 +310,7 @@ config NODES_SHIFT
 
 config ARCH_FLATMEM_ENABLE
 	def_bool y
+	depends on !NUMA
 
 config ARCH_SPARSEMEM_ENABLE
 	def_bool y
@@ -419,15 +422,4 @@ config SH_WRITETHROUGH
 
 	  If unsure, say N.
 
-config SH_OCRAM
-	bool "Operand Cache RAM (OCRAM) support"
-	help
-	  Selecting this option will automatically tear down the number of
-	  sets in the dcache by half, which in turn exposes a memory range.
-
-	  The addresses for the OC RAM base will vary according to the
-	  processor version. Consult vendor documentation for specifics.
-
-	  If unsure, say N.
-
 endmenu
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 40d4e798e7f..82b68c789a5 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -300,6 +300,7 @@ int remove_memory(u64 start, u64 size)
 }
 EXPORT_SYMBOL_GPL(remove_memory);
 
+#ifdef CONFIG_NUMA
 int memory_add_physaddr_to_nid(u64 addr)
 {
 	/* Node 0 for now.. */
@@ -307,3 +308,4 @@ int memory_add_physaddr_to_nid(u64 addr)
 }
 EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
 #endif
+#endif
-- 
cgit v1.2.3


From 9f9a5de4669902f80b6664baeba01595ffce3597 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 11 Jun 2007 15:33:44 +0900
Subject: sh: Fixup misaligned data for sh2 lockdep.

lockdep/irqflags tracing on SH-2 ends up with a misaligned
branch, fix it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh2/entry.S | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S
index c16dc8fec48..ee8f1fe84b0 100644
--- a/arch/sh/kernel/cpu/sh2/entry.S
+++ b/arch/sh/kernel/cpu/sh2/entry.S
@@ -311,6 +311,7 @@ restore_all:
 	rte
 	 nop
 
+	.align 2
 #ifdef CONFIG_TRACE_IRQFLAGS
 1:     .long   trace_hardirqs_off
 #endif
-- 
cgit v1.2.3


From a1e2833d13db6c2f0456b20338f66c0b248f5367 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 11 Jun 2007 15:56:31 +0900
Subject: sh: Kill off broken dma page ops.

There's no point in keeping these around, they've been broken
for some time, and the dmaenging/async_tx framework provides a
far more reasonable interface.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/drivers/dma/Kconfig | 17 --------
 arch/sh/mm/Makefile         |  4 +-
 arch/sh/mm/pg-dma.c         | 95 ---------------------------------------------
 3 files changed, 1 insertion(+), 115 deletions(-)
 delete mode 100644 arch/sh/mm/pg-dma.c

(limited to 'arch/sh')

diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
index 99935f9daf4..333898077c7 100644
--- a/arch/sh/drivers/dma/Kconfig
+++ b/arch/sh/drivers/dma/Kconfig
@@ -36,23 +36,6 @@ config NR_DMA_CHANNELS
 	  support. Setting this to a higher value allows for cascading DMACs
 	  with additional channels.
 
-config DMA_PAGE_OPS
-	bool "Use DMAC for page copy/clear"
-	depends on SH_DMA && BROKEN
-	help
-	  Selecting this option will use a dual-address mode configured channel
-	  in the SH DMAC for copy_page()/clear_page(). Primarily a performance
-	  hack.
-
-config DMA_PAGE_OPS_CHANNEL
-	depends on DMA_PAGE_OPS
-	int "DMA channel for sh memory-manager page copy/clear"
-	default "3"
-	help
-	  This allows the specification of the dual address dma channel,
-	  in case channel 3 is unavailable. On the SH4, channels 1,2, and 3
-	  are dual-address capable.
-
 config SH_DMABRG
 	bool "SH7760 DMABRG support"
 	depends on CPU_SUBTYPE_SH7760
diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile
index 47c330c528d..d677d7f3afc 100644
--- a/arch/sh/mm/Makefile
+++ b/arch/sh/mm/Makefile
@@ -8,9 +8,6 @@ obj-$(CONFIG_CPU_SH2)	+= cache-sh2.o
 obj-$(CONFIG_CPU_SH3)	+= cache-sh3.o
 obj-$(CONFIG_CPU_SH4)	+= cache-sh4.o
 
-obj-$(CONFIG_DMA_PAGE_OPS)	+= pg-dma.o
-obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
-
 mmu-y			:= fault-nommu.o tlb-nommu.o pg-nommu.o
 mmu-$(CONFIG_MMU)	:= fault.o clear_page.o copy_page.o tlb-flush.o	\
 			   ioremap.o
@@ -27,6 +24,7 @@ obj-$(CONFIG_CPU_SH4)		+= tlb-sh4.o pg-sh4.o
 obj-$(CONFIG_SH7705_CACHE_32KB) += pg-sh7705.o
 endif
 
+obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
 obj-$(CONFIG_SH7705_CACHE_32KB)	+= cache-sh7705.o
 obj-$(CONFIG_32BIT)		+= pmb.o
 obj-$(CONFIG_NUMA)		+= numa.o
diff --git a/arch/sh/mm/pg-dma.c b/arch/sh/mm/pg-dma.c
deleted file mode 100644
index bb23679369d..00000000000
--- a/arch/sh/mm/pg-dma.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * arch/sh/mm/pg-dma.c
- *
- * Fast clear_page()/copy_page() implementation using the SH DMAC
- *
- * Copyright (C) 2003  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/semaphore.h>
-#include <asm/mmu_context.h>
-#include <asm/addrspace.h>
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-
-/* Channel to use for page ops, must be dual-address mode capable. */
-static int dma_channel = CONFIG_DMA_PAGE_OPS_CHANNEL;
-
-static void copy_page_dma(void *to, void *from)
-{
-	/* 
-	 * This doesn't seem to get triggered until further along in the
-	 * boot process, at which point the DMAC is already initialized.
-	 * Fix this in the same fashion as clear_page_dma() in the event
-	 * that this crashes due to the DMAC not being initialized.
-	 */
-
-	flush_icache_range((unsigned long)from, PAGE_SIZE);
-	dma_write_page(dma_channel, (unsigned long)from, (unsigned long)to);
-	dma_wait_for_completion(dma_channel);
-}
-
-static void clear_page_dma(void *to)
-{
-	/*
-	 * We get invoked quite early on, if the DMAC hasn't been initialized
-	 * yet, fall back on the slow manual implementation.
-	 */
-	if (dma_info[dma_channel].chan != dma_channel) {
-		clear_page_slow(to);
-		return;
-	}
-
-	dma_write_page(dma_channel, (unsigned long)empty_zero_page,
-				    (unsigned long)to);
-
-	/*
-	 * FIXME: Something is a bit racy here, if we poll the counter right
-	 * away, we seem to lock. flushing the page from the dcache doesn't
-	 * seem to make a difference one way or the other, though either a full
-	 * icache or dcache flush does.
-	 *
-	 * The location of this is important as well, and must happen prior to
-	 * the completion loop but after the transfer was initiated.
-	 *
-	 * Oddly enough, this doesn't appear to be an issue for copy_page()..
-	 */
-	flush_icache_range((unsigned long)to, PAGE_SIZE);
-
-	dma_wait_for_completion(dma_channel);
-}
-
-static int __init pg_dma_init(void)
-{
-	int ret;
-	
-	ret = request_dma(dma_channel, "page ops");
-	if (ret != 0)
-		return ret;
-
-	copy_page = copy_page_dma;
-	clear_page = clear_page_dma;
-
-	return ret;
-}
-
-static void __exit pg_dma_exit(void)
-{
-	free_dma(dma_channel);
-}
-
-module_init(pg_dma_init);
-module_exit(pg_dma_exit);
-
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
-MODULE_DESCRIPTION("Optimized page copy/clear routines using a dual-address mode capable DMAC channel");
-MODULE_LICENSE("GPL");
-
-- 
cgit v1.2.3


From d3efbdd6c5e8c823b732df26a355ec931ccab374 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 11 Jun 2007 15:57:42 +0900
Subject: sh: Fix up the math-emu build.

math-emu wasn't converted for the trap_no/errno_code changes,
get it building again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/math-emu/math.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/math-emu/math.c b/arch/sh/math-emu/math.c
index a38e1eed9e7..ac2d7abd256 100644
--- a/arch/sh/math-emu/math.c
+++ b/arch/sh/math-emu/math.c
@@ -507,6 +507,7 @@ static int ieee_fpe_handler(struct pt_regs *regs)
 	unsigned short insn = *(unsigned short *)regs->pc;
 	unsigned short finsn;
 	unsigned long nextpc;
+	siginfo_t info;
 	int nib[4] = {
 		(insn >> 12) & 0xf,
 		(insn >> 8) & 0xf,
@@ -559,9 +560,11 @@ static int ieee_fpe_handler(struct pt_regs *regs)
 				~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
 			set_tsk_thread_flag(tsk, TIF_USEDFPU);
 		} else {
-			tsk->thread.trap_no = 11;
-			tsk->thread.error_code = 0;
-			force_sig(SIGFPE, tsk);
+			info.si_signo = SIGFPE;
+			info.si_errno = 0;
+			info.si_code = FPE_FLTINV;
+			info.si_addr = (void __user *)regs->pc;
+			force_sig_info(SIGFPE, &info, tsk);
 		}
 
 		regs->pc = nextpc;
@@ -576,14 +579,17 @@ asmlinkage void do_fpu_error(unsigned long r4, unsigned long r5,
 			     struct pt_regs regs)
 {
 	struct task_struct *tsk = current;
+	siginfo_t info;
 
 	if (ieee_fpe_handler (&regs))
 		return;
 
 	regs.pc += 2;
-	tsk->thread.trap_no = 11;
-	tsk->thread.error_code = 0;
-	force_sig(SIGFPE, tsk);
+	info.si_signo = SIGFPE;
+	info.si_errno = 0;
+	info.si_code = FPE_FLTINV;
+	info.si_addr = (void __user *)regs.pc;
+	force_sig_info(SIGFPE, &info, tsk);
 }
 
 /**
-- 
cgit v1.2.3


From d619500aed2f9b841b2310bc94f8056ae9ca2a73 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 15 Jun 2007 10:41:54 +0900
Subject: sh: rework intc2 code

The shared intc2 code currently contains cpu-specific #ifdefs.
This is a tad unclean and it prevents us from using the shared code
to drive board-specific irqs on the se7780 board.

This patch reworks the intc2 code by moving the base addresses of
the intc2 registers into struct intc2_desc. This new structure also
contains the name of the controller in struct irq_chip. The idea
behind putting struct irq_chip in there is that we can use offsetof()
to locate the base addresses in the irq_chip callbacks.

One logic change has been made - the original shared intc2 code
enabled the interrupts by default but with this patch they are all
disabled by default.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/se/7780/irq.c           | 45 ++++++++------------------
 arch/sh/kernel/cpu/irq/intc2.c         | 58 ++++++++++++++++------------------
 arch/sh/kernel/cpu/sh4/setup-sh7760.c  | 15 ++++++++-
 arch/sh/kernel/cpu/sh4a/setup-sh7780.c | 15 ++++++++-
 arch/sh/kernel/cpu/sh4a/setup-sh7785.c | 16 +++++++++-
 5 files changed, 84 insertions(+), 65 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/boards/se/7780/irq.c b/arch/sh/boards/se/7780/irq.c
index 3d0625c2d07..87491474600 100644
--- a/arch/sh/boards/se/7780/irq.c
+++ b/arch/sh/boards/se/7780/irq.c
@@ -16,28 +16,6 @@
 #include <asm/io.h>
 #include <asm/se7780.h>
 
-#define INTC_INTMSK0             0xFFD00044
-#define INTC_INTMSKCLR0          0xFFD00064
-
-static void disable_se7780_irq(unsigned int irq)
-{
-	struct intc2_data *p = get_irq_chip_data(irq);
-	ctrl_outl(1 << p->msk_shift, INTC_INTMSK0 + p->msk_offset);
-}
-
-static void enable_se7780_irq(unsigned int irq)
-{
-	struct intc2_data *p = get_irq_chip_data(irq);
-	ctrl_outl(1 << p->msk_shift, INTC_INTMSKCLR0 + p->msk_offset);
-}
-
-static struct irq_chip se7780_irq_chip __read_mostly = {
-	.name           = "SE7780",
-	.mask           = disable_se7780_irq,
-	.unmask         = enable_se7780_irq,
-	.mask_ack       = disable_se7780_irq,
-};
-
 static struct intc2_data intc2_irq_table[] = {
 	{ 2,  0, 31, 0, 31, 3 }, /* daughter board EXTINT1 */
 	{ 4,  0, 30, 0, 30, 3 }, /* daughter board EXTINT2 */
@@ -51,13 +29,24 @@ static struct intc2_data intc2_irq_table[] = {
 	{ 0 , 0, 24, 0, 24, 3 }, /* SM501 */
 };
 
+static struct intc2_desc intc2_irq_desc __read_mostly = {
+	.prio_base	= 0, /* N/A */
+	.msk_base	= 0xffd00044,
+	.mskclr_base	= 0xffd00064,
+
+	.intc2_data	= intc2_irq_table,
+	.nr_irqs	= ARRAY_SIZE(intc2_irq_table),
+
+	.chip = {
+		.name	= "INTC2-se7780",
+	},
+};
+
 /*
  * Initialize IRQ setting
  */
 void __init init_se7780_IRQ(void)
 {
-	int i ;
-
 	/* enable all interrupt at FPGA */
 	ctrl_outw(0, FPGA_INTMSK1);
 	/* mask SM501 interrupt */
@@ -79,11 +68,5 @@ void __init init_se7780_IRQ(void)
 	/* FPGA + 0x0A */
 	ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
 
-	for (i = 0; i < ARRAY_SIZE(intc2_irq_table); i++) {
-		disable_irq_nosync(intc2_irq_table[i].irq);
-		set_irq_chip_and_handler_name( intc2_irq_table[i].irq, &se7780_irq_chip,
-			handle_level_irq, "level");
-		set_irq_chip_data( intc2_irq_table[i].irq, &intc2_irq_table[i] );
-		disable_se7780_irq(intc2_irq_table[i].irq);
-	}
+	register_intc2_controller(&intc2_irq_desc);
 }
diff --git a/arch/sh/kernel/cpu/irq/intc2.c b/arch/sh/kernel/cpu/irq/intc2.c
index d8e22f4ff0f..dae02d3152e 100644
--- a/arch/sh/kernel/cpu/irq/intc2.c
+++ b/arch/sh/kernel/cpu/irq/intc2.c
@@ -14,36 +14,26 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7760)
-#define INTC2_BASE	0xfe080000
-#define INTC2_INTMSK	(INTC2_BASE + 0x40)
-#define INTC2_INTMSKCLR	(INTC2_BASE + 0x60)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7785)
-#define INTC2_BASE	0xffd40000
-#define INTC2_INTMSK	(INTC2_BASE + 0x38)
-#define INTC2_INTMSKCLR	(INTC2_BASE + 0x3c)
-#endif
+static inline struct intc2_desc *get_intc2_desc(unsigned int irq)
+{
+	struct irq_chip *chip = get_irq_chip(irq);
+	return (void *)((char *)chip - offsetof(struct intc2_desc, chip));
+}
 
 static void disable_intc2_irq(unsigned int irq)
 {
 	struct intc2_data *p = get_irq_chip_data(irq);
-	ctrl_outl(1 << p->msk_shift, INTC2_INTMSK + p->msk_offset);
+	struct intc2_desc *d = get_intc2_desc(irq);
+	ctrl_outl(1 << p->msk_shift, d->msk_base + p->msk_offset);
 }
 
 static void enable_intc2_irq(unsigned int irq)
 {
 	struct intc2_data *p = get_irq_chip_data(irq);
-	ctrl_outl(1 << p->msk_shift, INTC2_INTMSKCLR + p->msk_offset);
+	struct intc2_desc *d = get_intc2_desc(irq);
+	ctrl_outl(1 << p->msk_shift, d->mskclr_base + p->msk_offset);
 }
 
-static struct irq_chip intc2_irq_chip = {
-	.name		= "INTC2",
-	.mask		= disable_intc2_irq,
-	.unmask		= enable_intc2_irq,
-	.mask_ack	= disable_intc2_irq,
-};
-
 /*
  * Setup an INTC2 style interrupt.
  * NOTE: Unlike IPR interrupts, parameters are not shifted by this code,
@@ -56,30 +46,36 @@ static struct irq_chip intc2_irq_chip = {
  *
  * in the intc2_data table.
  */
-void make_intc2_irq(struct intc2_data *table, unsigned int nr_irqs)
+void register_intc2_controller(struct intc2_desc *desc)
 {
 	int i;
 
-	for (i = 0; i < nr_irqs; i++) {
+	desc->chip.mask = disable_intc2_irq;
+	desc->chip.unmask = enable_intc2_irq;
+	desc->chip.mask_ack = disable_intc2_irq;
+
+	for (i = 0; i < desc->nr_irqs; i++) {
 		unsigned long ipr, flags;
-		struct intc2_data *p = table + i;
+		struct intc2_data *p = desc->intc2_data + i;
 
 		disable_irq_nosync(p->irq);
 
-		/* Set the priority level */
-		local_irq_save(flags);
+		if (desc->prio_base) {
+			/* Set the priority level */
+			local_irq_save(flags);
 
-		ipr = ctrl_inl(INTC2_BASE + p->ipr_offset);
-		ipr &= ~(0xf << p->ipr_shift);
-		ipr |= p->priority << p->ipr_shift;
-		ctrl_outl(ipr, INTC2_BASE + p->ipr_offset);
+			ipr = ctrl_inl(desc->prio_base + p->ipr_offset);
+			ipr &= ~(0xf << p->ipr_shift);
+			ipr |= p->priority << p->ipr_shift;
+			ctrl_outl(ipr, desc->prio_base + p->ipr_offset);
 
-		local_irq_restore(flags);
+			local_irq_restore(flags);
+		}
 
-		set_irq_chip_and_handler_name(p->irq, &intc2_irq_chip,
+		set_irq_chip_and_handler_name(p->irq, &desc->chip,
 					      handle_level_irq, "level");
 		set_irq_chip_data(p->irq, p);
 
-		enable_intc2_irq(p->irq);
+		disable_intc2_irq(p->irq);
 	}
 }
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
index b7c702821e6..6d3c9189777 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
@@ -96,6 +96,19 @@ static struct intc2_data intc2_irq_table[] = {
 	{109,12,  0, 4,  0,  3},	/* CMTI */
 };
 
+static struct intc2_desc intc2_irq_desc __read_mostly = {
+	.prio_base	= 0xfe080000,
+	.msk_base	= 0xfe080040,
+	.mskclr_base	= 0xfe080060,
+
+	.intc2_data	= intc2_irq_table,
+	.nr_irqs	= ARRAY_SIZE(intc2_irq_table),
+
+	.chip = {
+		.name	= "INTC2-sh7760",
+	},
+};
+
 static struct ipr_data sh7760_ipr_map[] = {
 	/* IRQ, IPR-idx, shift, priority */
 	{ 16, 0, 12, 2 }, /* TMU0 TUNI*/
@@ -143,7 +156,7 @@ unsigned int map_ipridx_to_addr(int idx)
 
 void __init init_IRQ_intc2(void)
 {
-	make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table));
+	register_intc2_controller(&intc2_irq_desc);
 }
 
 void __init  init_IRQ_ipr(void)
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
index 9aeaa2ddaa2..b57c760bffd 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
@@ -102,7 +102,20 @@ static struct intc2_data intc2_irq_table[] = {
 	{ 68, 0x14,  8, 0, 18, 2 },	/* PCIC4 */
 };
 
+static struct intc2_desc intc2_irq_desc __read_mostly = {
+	.prio_base	= 0xffd40000,
+	.msk_base	= 0xffd40038,
+	.mskclr_base	= 0xffd4003c,
+
+	.intc2_data	= intc2_irq_table,
+	.nr_irqs	= ARRAY_SIZE(intc2_irq_table),
+
+	.chip = {
+		.name	= "INTC2-sh7780",
+	},
+};
+
 void __init init_IRQ_intc2(void)
 {
-	make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table));
+	register_intc2_controller(&intc2_irq_desc);
 }
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
index 07b0de82cfe..ce10ec5d691 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
@@ -97,7 +97,21 @@ static struct intc2_data intc2_irq_table[] = {
 	{ 60, 12, 16, 0, 7, 3 },	/* SCIF5 ERI, RXI, BRI, TXI */
 };
 
+static struct intc2_desc intc2_irq_desc __read_mostly = {
+	.prio_base	= 0xffd40000,
+	.msk_base	= 0xffd40038,
+	.mskclr_base	= 0xffd4003c,
+
+	.intc2_data	= intc2_irq_table,
+	.nr_irqs	= ARRAY_SIZE(intc2_irq_table),
+
+	.chip = {
+		.name	= "INTC2-sh7785",
+	},
+};
+
 void __init init_IRQ_intc2(void)
 {
-	make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table));
+	register_intc2_controller(&intc2_irq_desc);
 }
+
-- 
cgit v1.2.3


From 50f63f2518ee68bc132d357d2b6fdb7f60ef79e0 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 15 Jun 2007 18:30:42 +0900
Subject: sh: Only support PMB for SH-X cores.

We don't have a PMB for SH-X2 or later, so only enable it for
the few CPUs that support it. Fixes up the boot for SH4AL-DSP.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/sh')

diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 58bf6225d91..6fc5550c4ba 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -263,7 +263,7 @@ config MEMORY_SIZE
 
 config 32BIT
 	bool "Support 32-bit physical addressing through PMB"
-	depends on CPU_SH4A && MMU && (!X2TLB || BROKEN)
+	depends on MMU && (CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785)
 	default y
 	help
 	  If you say Y here, physical addressing will be extended to
-- 
cgit v1.2.3


From 68abdbbb03476a60d932eeba0035dd5069afec38 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 15 Jun 2007 18:56:19 +0900
Subject: sh: rework ipr code

This patch reworks the ipr code by grouping the offset array together
with the ipr_data structure in a new data structure called ipr_desc.
This new structure also contains the name of the controller in struct
irq_chip. The idea behind putting struct irq_chip in there is that we
can use offsetof() to locate the base addresses in the irq_chip
callbacks. This strategy has much in common with the recently merged
intc2 code.

One logic change has been made - the original ipr code enabled the
interrupts by default but with this patch they are all disabled by
default.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/se/770x/irq.c           | 124 ++++++++++++++-------------------
 arch/sh/boards/se/7722/irq.c           |  15 +++-
 arch/sh/boards/se/7751/irq.c           |  59 ++++++----------
 arch/sh/boards/sh03/setup.c            |  28 ++++++--
 arch/sh/boards/shmin/setup.c           |  30 ++++++--
 arch/sh/boards/snapgear/setup.c        |  28 ++++++--
 arch/sh/boards/titan/setup.c           |  22 +++++-
 arch/sh/kernel/cpu/irq/ipr.c           |  59 ++++++++--------
 arch/sh/kernel/cpu/sh2/setup-sh7619.c  |  24 ++++---
 arch/sh/kernel/cpu/sh2a/setup-sh7206.c |  24 ++++---
 arch/sh/kernel/cpu/sh3/setup-sh7705.c  |  40 ++++++-----
 arch/sh/kernel/cpu/sh3/setup-sh7709.c  |  84 +++++++++++++++-------
 arch/sh/kernel/cpu/sh3/setup-sh7710.c  |  42 ++++++-----
 arch/sh/kernel/cpu/sh4/setup-sh7750.c  |  58 +++++++++------
 arch/sh/kernel/cpu/sh4/setup-sh7760.c  |  32 +++++----
 arch/sh/kernel/cpu/sh4a/setup-sh7722.c |  21 +++---
 16 files changed, 404 insertions(+), 286 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/se/770x/irq.c
index c8eccff77a0..cdb0807928a 100644
--- a/arch/sh/boards/se/770x/irq.c
+++ b/arch/sh/boards/se/770x/irq.c
@@ -15,46 +15,7 @@
 #include <asm/io.h>
 #include <asm/se.h>
 
-/* 
- * If the problem of make_ipr_irq is solved, 
- * this code will become unnecessary. :-) 
- */
-static void se770x_disable_ipr_irq(unsigned int irq)
-{
-	struct ipr_data *p = get_irq_chip_data(irq);
-
-	ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << p->shift)), p->addr);
-}
-
-static void se770x_enable_ipr_irq(unsigned int irq)
-{
-	struct ipr_data *p = get_irq_chip_data(irq);
-
-	ctrl_outw(ctrl_inw(p->addr) | (p->priority << p->shift), p->addr);
-}
-
-static struct irq_chip se770x_irq_chip = {
-	.name           = "MS770xSE-FPGA",
-	.mask           = se770x_disable_ipr_irq,
-	.unmask         = se770x_enable_ipr_irq,
-	.mask_ack       = se770x_disable_ipr_irq,
-};
-
-void make_se770x_irq(struct ipr_data *table, unsigned int nr_irqs)
-{
-	int i;
-
-	for (i = 0; i < nr_irqs; i++) {
-		unsigned int irq = table[i].irq;
-		disable_irq_nosync(irq);
-		set_irq_chip_and_handler_name(irq, &se770x_irq_chip,
-			handle_level_irq, "level");
-		set_irq_chip_data(irq, &table[i]);
-		se770x_enable_ipr_irq(irq);
-	}
-}
-
-static struct ipr_data se770x_ipr_map[] = {
+static struct ipr_data ipr_irq_table[] = {
 	/*
 	* Super I/O (Just mimic PC):
 	*  1: keyboard
@@ -68,46 +29,67 @@ static struct ipr_data se770x_ipr_map[] = {
 	*/
 #if defined(CONFIG_CPU_SUBTYPE_SH7705)
 	/* This is default value */
-	{ 13, 0, 8,  0x0f-13 ,BCR_ILCRA},
-	{ 5 , 0, 4,  0x0f- 5 ,BCR_ILCRA},
-	{ 10, 0, 0,  0x0f-10, BCR_ILCRB},
-	{ 7 , 0, 4,  0x0f- 7, BCR_ILCRC},
-	{ 3 , 0, 0,  0x0f- 3, BCR_ILCRC},
-	{ 1 , 0, 12, 0x0f- 1, BCR_ILCRD},
-	{ 12, 0, 4,  0x0f-12, BCR_ILCRD}, /* LAN */
-	{ 2 , 0, 8,  0x0f- 2, BCR_ILCRE}, /* PCIRQ2 */
-	{ 6 , 0, 4,  0x0f- 6, BCR_ILCRE}, /* PCIRQ1 */
-	{ 14, 0, 0,  0x0f-14, BCR_ILCRE}, /* PCIRQ0 */
-	{ 0 , 0, 12, 0x0f   , BCR_ILCRF}, 
-	{ 4 , 0, 4,  0x0f- 4, BCR_ILCRF},
-	{ 8 , 0, 12, 0x0f- 8, BCR_ILCRG},
-	{ 9 , 0, 8,  0x0f- 9, BCR_ILCRG},
-	{ 11, 0, 4,  0x0f-11, BCR_ILCRG},
+	{ 13, 0, 8,  0x0f-13, },
+	{ 5 , 0, 4,  0x0f- 5, },
+	{ 10, 1, 0,  0x0f-10, },
+	{ 7 , 2, 4,  0x0f- 7, },
+	{ 3 , 2, 0,  0x0f- 3, },
+	{ 1 , 3, 12, 0x0f- 1, },
+	{ 12, 3, 4,  0x0f-12, }, /* LAN */
+	{ 2 , 4, 8,  0x0f- 2, }, /* PCIRQ2 */
+	{ 6 , 4, 4,  0x0f- 6, }, /* PCIRQ1 */
+	{ 14, 4, 0,  0x0f-14, }, /* PCIRQ0 */
+	{ 0 , 5, 12, 0x0f   , }, 
+	{ 4 , 5, 4,  0x0f- 4, },
+	{ 8 , 6, 12, 0x0f- 8, },
+	{ 9 , 6, 8,  0x0f- 9, },
+	{ 11, 6, 4,  0x0f-11, },
 #else
-	{ 14, 0,  8, 0x0f-14 ,BCR_ILCRA},
-	{ 12, 0,  4, 0x0f-12 ,BCR_ILCRA},
-	{  8, 0,  4, 0x0f- 8 ,BCR_ILCRB},
-	{  6, 0, 12, 0x0f- 6 ,BCR_ILCRC},
-	{  5, 0,  8, 0x0f- 5 ,BCR_ILCRC},
-	{  4, 0,  4, 0x0f- 4 ,BCR_ILCRC},
-	{  3, 0,  0, 0x0f- 3 ,BCR_ILCRC},
-	{  1, 0, 12, 0x0f- 1 ,BCR_ILCRD},
+	{ 14, 0,  8, 0x0f-14, },
+	{ 12, 0,  4, 0x0f-12, },
+	{  8, 1,  4, 0x0f- 8, },
+	{  6, 2, 12, 0x0f- 6, },
+	{  5, 2,  8, 0x0f- 5, },
+	{  4, 2,  4, 0x0f- 4, },
+	{  3, 2,  0, 0x0f- 3, },
+	{  1, 3, 12, 0x0f- 1, },
 #if defined(CONFIG_STNIC)
 	/* ST NIC */
-	{ 10, 0,  4, 0x0f-10 ,BCR_ILCRD}, 	/* LAN */
+	{ 10, 3,  4, 0x0f-10, }, 	/* LAN */
 #endif
 	/* MRSHPC IRQs setting */
-	{  0, 0, 12, 0x0f- 0 ,BCR_ILCRE},	/* PCIRQ3 */
-	{ 11, 0,  8, 0x0f-11 ,BCR_ILCRE}, 	/* PCIRQ2 */
-	{  9, 0,  4, 0x0f- 9 ,BCR_ILCRE}, 	/* PCIRQ1 */
-	{  7, 0,  0, 0x0f- 7 ,BCR_ILCRE}, 	/* PCIRQ0 */
+	{  0, 4, 12, 0x0f- 0, },	/* PCIRQ3 */
+	{ 11, 4,  8, 0x0f-11, }, 	/* PCIRQ2 */
+	{  9, 4,  4, 0x0f- 9, }, 	/* PCIRQ1 */
+	{  7, 4,  0, 0x0f- 7, }, 	/* PCIRQ0 */
 	/* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
 	/* NOTE: #2 and #13 are not used on PC */
-	{ 13, 0,  4, 0x0f-13 ,BCR_ILCRG}, 	/* SLOTIRQ2 */
-	{  2, 0,  0, 0x0f- 2 ,BCR_ILCRG}, 	/* SLOTIRQ1 */
+	{ 13, 6,  4, 0x0f-13, }, 	/* SLOTIRQ2 */
+	{  2, 6,  0, 0x0f- 2, }, 	/* SLOTIRQ1 */
 #endif
 };
 
+static unsigned long ipr_offsets[] = {
+	BCR_ILCRA,
+	BCR_ILCRB,
+	BCR_ILCRC,
+	BCR_ILCRD,
+	BCR_ILCRE,
+	BCR_ILCRF,
+	BCR_ILCRG,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+	.chip = {
+		.name	= "IPR-se770x",
+	},
+};
+
 /*
  * Initialize IRQ setting
  */
@@ -122,5 +104,5 @@ void __init init_se_IRQ(void)
 	ctrl_outw(0, BCR_ILCRF);
 	ctrl_outw(0, BCR_ILCRG);
 
-	make_se770x_irq(se770x_ipr_map, ARRAY_SIZE(se770x_ipr_map));
+	register_ipr_controller(&ipr_irq_desc);
 }
diff --git a/arch/sh/boards/se/7722/irq.c b/arch/sh/boards/se/7722/irq.c
index 099e5deb77f..26cff0efda4 100644
--- a/arch/sh/boards/se/7722/irq.c
+++ b/arch/sh/boards/se/7722/irq.c
@@ -19,15 +19,24 @@
 #define INTC_INTMSK0             0xFFD00044
 #define INTC_INTMSKCLR0          0xFFD00064
 
+struct se7722_data {
+	unsigned char irq;
+	unsigned char ipr_idx;
+	unsigned char shift;
+	unsigned short priority;
+	unsigned long addr;
+};
+
+
 static void disable_se7722_irq(unsigned int irq)
 {
-	struct ipr_data *p = get_irq_chip_data(irq);
+	struct se7722_data *p = get_irq_chip_data(irq);
 	ctrl_outw( ctrl_inw( p->addr ) | p->priority , p->addr );
 }
 
 static void enable_se7722_irq(unsigned int irq)
 {
-	struct ipr_data *p = get_irq_chip_data(irq);
+	struct se7722_data *p = get_irq_chip_data(irq);
 	ctrl_outw( ctrl_inw( p->addr ) & ~p->priority , p->addr );
 }
 
@@ -38,7 +47,7 @@ static struct irq_chip se7722_irq_chip __read_mostly = {
 	.mask_ack       = disable_se7722_irq,
 };
 
-static struct ipr_data ipr_irq_table[] = {
+static struct se7722_data ipr_irq_table[] = {
 	/* irq        ,idx,sft, priority     , addr   */
 	{ MRSHPC_IRQ0 , 0 , 0 , MRSHPC_BIT0 , IRQ01_MASK } ,
 	{ MRSHPC_IRQ1 , 0 , 0 , MRSHPC_BIT1 , IRQ01_MASK } ,
diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/se/7751/irq.c
index e4c63a48296..c3d12590e5d 100644
--- a/arch/sh/boards/se/7751/irq.c
+++ b/arch/sh/boards/se/7751/irq.c
@@ -14,44 +14,31 @@
 #include <asm/irq.h>
 #include <asm/se7751.h>
 
-static struct ipr_data se7751_ipr_map[] = {
-  /* Leave old Solution Engine code in for reference. */
-#if defined(CONFIG_SH_SOLUTION_ENGINE)
-	/*
-	 * Super I/O (Just mimic PC):
-	 *  1: keyboard
-	 *  3: serial 0
-	 *  4: serial 1
-	 *  5: printer
-	 *  6: floppy
-	 *  8: rtc
-	 * 12: mouse
-	 * 14: ide0
-	 */
-	{ 14, BCR_ILCRA, 2, 0x0f-14 },
-	{ 12, BCR_ILCRA, 1, 0x0f-12 },
-	{  8, BCR_ILCRB, 1, 0x0f- 8 },
-	{  6, BCR_ILCRC, 3, 0x0f- 6 },
-	{  5, BCR_ILCRC, 2, 0x0f- 5 },
-	{  4, BCR_ILCRC, 1, 0x0f- 4 },
-	{  3, BCR_ILCRC, 0, 0x0f- 3 },
-	{  1, BCR_ILCRD, 3, 0x0f- 1 },
+static struct ipr_data ipr_irq_table[] = {
+	{ 13, 3, 3, 2 },
+	/* Add additional entries here as drivers are added and tested. */
+};
 
-	{ 10, BCR_ILCRD, 1, 0x0f-10 }, /* LAN */
+static unsigned long ipr_offsets[] = {
+	BCR_ILCRA,
+	BCR_ILCRB,
+	BCR_ILCRC,
+	BCR_ILCRD,
+	BCR_ILCRE,
+	BCR_ILCRF,
+	BCR_ILCRG,
+};
 
-	{  0, BCR_ILCRE, 3, 0x0f- 0 }, /* PCIRQ3 */
-	{ 11, BCR_ILCRE, 2, 0x0f-11 }, /* PCIRQ2 */
-	{  9, BCR_ILCRE, 1, 0x0f- 9 }, /* PCIRQ1 */
-	{  7, BCR_ILCRE, 0, 0x0f- 7 }, /* PCIRQ0 */
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
 
-	/* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
-	/* NOTE: #2 and #13 are not used on PC */
-	{ 13, BCR_ILCRG, 1, 0x0f-13 }, /* SLOTIRQ2 */
-	{  2, BCR_ILCRG, 0, 0x0f- 2 }, /* SLOTIRQ1 */
-#elif defined(CONFIG_SH_7751_SOLUTION_ENGINE)
-	{ 13, BCR_ILCRD, 3, 2 },
-	/* Add additional entries here as drivers are added and tested. */
-#endif
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-se7751",
+	},
 };
 
 /*
@@ -59,5 +46,5 @@ static struct ipr_data se7751_ipr_map[] = {
  */
 void __init init_7751se_IRQ(void)
 {
-	make_ipr_irq(se7751_ipr_map, ARRAY_SIZE(se7751_ipr_map));
+	register_ipr_controller(&ipr_irq_desc);
 }
diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/sh03/setup.c
index d7867c190a9..9c031a8c0a1 100644
--- a/arch/sh/boards/sh03/setup.c
+++ b/arch/sh/boards/sh03/setup.c
@@ -15,17 +15,33 @@
 #include <asm/sh03/sh03.h>
 #include <asm/addrspace.h>
 
-static struct ipr_data sh03_ipr_map[] = {
-	{ IRL0_IRQ, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY },
-	{ IRL1_IRQ, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY },
-	{ IRL2_IRQ, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY },
-	{ IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY },
+static struct ipr_data ipr_irq_table[] = {
+	{ IRL0_IRQ, 0, IRL0_IPR_POS, IRL0_PRIORITY },
+	{ IRL1_IRQ, 0, IRL1_IPR_POS, IRL1_PRIORITY },
+	{ IRL2_IRQ, 0, IRL2_IPR_POS, IRL2_PRIORITY },
+	{ IRL3_IRQ, 0, IRL3_IPR_POS, IRL3_PRIORITY },
+};
+
+static unsigned long ipr_offsets[] = {
+	INTC_IPRD,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-sh03",
+	},
 };
 
 static void __init init_sh03_IRQ(void)
 {
 	ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
-	make_ipr_irq(sh03_ipr_map, ARRAY_SIZE(sh03_ipr_map));
+	register_ipr_controller(&ipr_irq_desc);
 }
 
 extern void *cf_io_base;
diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/shmin/setup.c
index 9c8bb51eb4b..dfd124509f4 100644
--- a/arch/sh/boards/shmin/setup.c
+++ b/arch/sh/boards/shmin/setup.c
@@ -6,28 +6,44 @@
  * SHMIN Support.
  */
 #include <linux/init.h>
+#include <linux/irq.h>
 #include <asm/machvec.h>
 #include <asm/shmin.h>
 #include <asm/clock.h>
-#include <asm/irq.h>
 #include <asm/io.h>
 
 #define PFC_PHCR	0xa400010eUL
 #define INTC_ICR1	0xa4000010UL
 #define INTC_IPRC	0xa4000016UL
 
-static struct ipr_data shmin_ipr_map[] = {
-	{ .irq=32, .addr=INTC_IPRC, .shift= 0, .priority=0 },
-	{ .irq=33, .addr=INTC_IPRC, .shift= 4, .priority=0 },
-	{ .irq=34, .addr=INTC_IPRC, .shift= 8, .priority=8 },
-	{ .irq=35, .addr=INTC_IPRC, .shift=12, .priority=0 },
+static struct ipr_data ipr_irq_table[] = {
+	{ 32, 0, 0, 0 },
+	{ 33, 0, 4, 0 },
+	{ 34, 0, 8, 8 },
+	{ 35, 0, 12, 0 },
+};
+
+static unsigned long ipr_offsets[] = {
+	INTC_IPRC,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-shmin",
+	},
 };
 
 static void __init init_shmin_irq(void)
 {
 	ctrl_outw(0x2a00, PFC_PHCR);	// IRQ0-3=IRQ
 	ctrl_outw(0x0aaa, INTC_ICR1);	// IRQ0-3=IRQ-mode,Low-active.
-	make_ipr_irq(shmin_ipr_map, ARRAY_SIZE(shmin_ipr_map));
+	register_ipr_controller(&ipr_irq_desc);
 }
 
 static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size)
diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c
index b40124c092f..84271d85a8d 100644
--- a/arch/sh/boards/snapgear/setup.c
+++ b/arch/sh/boards/snapgear/setup.c
@@ -68,11 +68,27 @@ module_init(eraseconfig_init);
  * IRL3 = crypto
  */
 
-static struct ipr_data snapgear_ipr_map[] = {
-	make_ipr_irq(IRL0_IRQ, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY);
-	make_ipr_irq(IRL1_IRQ, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY);
-	make_ipr_irq(IRL2_IRQ, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY);
-	make_ipr_irq(IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY);
+static struct ipr_data ipr_irq_table[] = {
+	{ IRL0_IRQ, 0, IRL0_IPR_POS, IRL0_PRIORITY },
+	{ IRL1_IRQ, 0, IRL1_IPR_POS, IRL1_PRIORITY },
+	{ IRL2_IRQ, 0, IRL2_IPR_POS, IRL2_PRIORITY },
+	{ IRL3_IRQ, 0, IRL3_IPR_POS, IRL3_PRIORITY },
+};
+
+static unsigned long ipr_offsets[] = {
+	INTC_IPRD,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-snapgear",
+	},
 };
 
 static void __init init_snapgear_IRQ(void)
@@ -82,7 +98,7 @@ static void __init init_snapgear_IRQ(void)
 
 	printk("Setup SnapGear IRQ/IPR ...\n");
 
-	make_ipr_irq(snapgear_ipr_map, ARRAY_SIZE(snapgear_ipr_map));
+	register_ipr_controller(&ipr_irq_desc);
 }
 
 /*
diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/titan/setup.c
index 630f62f69a3..606d25a4b87 100644
--- a/arch/sh/boards/titan/setup.c
+++ b/arch/sh/boards/titan/setup.c
@@ -12,7 +12,7 @@
 #include <asm/titan.h>
 #include <asm/io.h>
 
-static struct ipr_data titan_ipr_map[] = {
+static struct ipr_data ipr_irq_table[] = {
 	/* IRQ, IPR idx, shift, prio */
 	{ TITAN_IRQ_WAN,   3, 12, 8 },	/* eth0 (WAN) */
 	{ TITAN_IRQ_LAN,   3,  8, 8 },	/* eth1 (LAN) */
@@ -20,12 +20,30 @@ static struct ipr_data titan_ipr_map[] = {
 	{ TITAN_IRQ_USB,   3,  0, 8 },	/* mPCI B (bottom), USB */
 };
 
+static unsigned long ipr_offsets[] = { /* stolen from setup-sh7750.c */
+	0xffd00004UL,	/* 0: IPRA */
+	0xffd00008UL,	/* 1: IPRB */
+	0xffd0000cUL,	/* 2: IPRC */
+	0xffd00010UL,	/* 3: IPRD */
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-titan",
+	},
+};
 static void __init init_titan_irq(void)
 {
 	/* enable individual interrupt mode for externals */
 	ipr_irq_enable_irlm();
 	/* register ipr irqs */
-	make_ipr_irq(titan_ipr_map, ARRAY_SIZE(titan_ipr_map));
+	register_ipr_controller(&ipr_irq_desc);
 }
 
 static struct sh_machine_vector mv_titan __initmv = {
diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c
index 210280b6fdd..98e84f40c71 100644
--- a/arch/sh/kernel/cpu/irq/ipr.c
+++ b/arch/sh/kernel/cpu/irq/ipr.c
@@ -22,58 +22,57 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
 
+static inline struct ipr_desc *get_ipr_desc(unsigned int irq)
+{
+	struct irq_chip *chip = get_irq_chip(irq);
+	return (void *)((char *)chip - offsetof(struct ipr_desc, chip));
+}
+
 static void disable_ipr_irq(unsigned int irq)
 {
 	struct ipr_data *p = get_irq_chip_data(irq);
+	unsigned long addr = get_ipr_desc(irq)->ipr_offsets[p->ipr_idx];
 	/* Set the priority in IPR to 0 */
-	ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << p->shift)), p->addr);
+	ctrl_outw(ctrl_inw(addr) & (0xffff ^ (0xf << p->shift)), addr);
 }
 
 static void enable_ipr_irq(unsigned int irq)
 {
 	struct ipr_data *p = get_irq_chip_data(irq);
+	unsigned long addr = get_ipr_desc(irq)->ipr_offsets[p->ipr_idx];
 	/* Set priority in IPR back to original value */
-	ctrl_outw(ctrl_inw(p->addr) | (p->priority << p->shift), p->addr);
+	ctrl_outw(ctrl_inw(addr) | (p->priority << p->shift), addr);
 }
 
-static struct irq_chip ipr_irq_chip = {
-	.name		= "IPR",
-	.mask		= disable_ipr_irq,
-	.unmask		= enable_ipr_irq,
-	.mask_ack	= disable_ipr_irq,
-};
-
-unsigned int map_ipridx_to_addr(int idx) __attribute__ ((weak));
-unsigned int map_ipridx_to_addr(int idx)
-{
-	return 0;
-}
+/*
+ * The shift value is now the number of bits to shift, not the number of
+ * bits/4. This is to make it easier to read the value directly from the
+ * datasheets. The IPR address is calculated using the ipr_offset table.
+ */
 
-void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs)
+void register_ipr_controller(struct ipr_desc *desc)
 {
 	int i;
 
-	for (i = 0; i < nr_irqs; i++) {
-		unsigned int irq = table[i].irq;
+	desc->chip.mask = disable_ipr_irq;
+	desc->chip.unmask = enable_ipr_irq;
+	desc->chip.mask_ack = disable_ipr_irq;
 
-		if (!irq)
-			irq = table[i].irq = i;
+	for (i = 0; i < desc->nr_irqs; i++) {
+		struct ipr_data *p = desc->ipr_data + i;
 
-		/* could the IPR index be mapped, if not we ignore this */
-		if (!table[i].addr) {
-			table[i].addr = map_ipridx_to_addr(table[i].ipr_idx);
-			if (!table[i].addr)
-				continue;
-		}
+		BUG_ON(p->ipr_idx >= desc->nr_offsets);
+		BUG_ON(!desc->ipr_offsets[p->ipr_idx]);
 
-		disable_irq_nosync(irq);
-		set_irq_chip_and_handler_name(irq, &ipr_irq_chip,
+		disable_irq_nosync(p->irq);
+		set_irq_chip_and_handler_name(p->irq, &desc->chip,
 				      handle_level_irq, "level");
-		set_irq_chip_data(irq, &table[i]);
-		enable_ipr_irq(irq);
+		set_irq_chip_data(p->irq, p);
+		disable_ipr_irq(p->irq);
 	}
 }
-EXPORT_SYMBOL(make_ipr_irq);
+
+EXPORT_SYMBOL(register_ipr_controller);
 
 #if !defined(CONFIG_CPU_HAS_PINT_IRQ)
 int ipr_irq_demux(int irq)
diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
index f83ff8a68f3..1a107fe22dd 100644
--- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
@@ -52,7 +52,7 @@ static int __init sh7619_devices_setup(void)
 }
 __initcall(sh7619_devices_setup);
 
-static struct ipr_data sh7619_ipr_map[] = {
+static struct ipr_data ipr_irq_table[] = {
 	{ 86, 0,  4, 2 },	/* CMI0 */
 	{ 88, 1, 12, 3 },	/* SCIF0_ERI */
 	{ 89, 1, 12, 3 },	/* SCIF0_RXI */
@@ -68,7 +68,7 @@ static struct ipr_data sh7619_ipr_map[] = {
 	{ 99, 1,  4, 3 },	/* SCIF2_TXI */
 };
 
-static unsigned int ipr_offsets[] = {
+static unsigned long ipr_offsets[] = {
 	0xf8080000,	/* IPRC */
 	0xf8080002,	/* IPRD */
 	0xf8080004,	/* IPRE */
@@ -76,15 +76,19 @@ static unsigned int ipr_offsets[] = {
 	0xf8080008,	/* IPRG */
 };
 
-/* given the IPR index return the address of the IPR register */
-unsigned int map_ipridx_to_addr(int idx)
-{
-	if (unlikely(idx >= ARRAY_SIZE(ipr_offsets)))
-		return 0;
-	return ipr_offsets[idx];
-}
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-sh7619",
+	},
+};
 
 void __init init_IRQ_ipr(void)
 {
-	make_ipr_irq(sh7619_ipr_map, ARRAY_SIZE(sh7619_ipr_map));
+	register_ipr_controller(&ipr_irq_desc);
 }
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
index 4ed9110632b..b6e3a6351fa 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
@@ -57,7 +57,7 @@ static int __init sh7206_devices_setup(void)
 }
 __initcall(sh7206_devices_setup);
 
-static struct ipr_data sh7206_ipr_map[] = {
+static struct ipr_data ipr_irq_table[] = {
 	{ 140,  7, 12, 2 },	/* CMI0 */
 	{ 164,  8,  4, 2 },	/* MTU2_TGI1A */
 	{ 240, 13, 12, 3 },	/* SCIF0_BRI */
@@ -78,7 +78,7 @@ static struct ipr_data sh7206_ipr_map[] = {
 	{ 255, 13,  0, 3 },	/* SCIF3_TXI */
 };
 
-static unsigned int ipr_offsets[] = {
+static unsigned long ipr_offsets[] = {
 	0xfffe0818,	/* IPR01 */
 	0xfffe081a,	/* IPR02 */
 	0,		/* unused */
@@ -95,15 +95,19 @@ static unsigned int ipr_offsets[] = {
 	0xfffe0c10,	/* IPR14 */
 };
 
-/* given the IPR index return the address of the IPR register */
-unsigned int map_ipridx_to_addr(int idx)
-{
-	if (unlikely(idx >= ARRAY_SIZE(ipr_offsets)))
-		return 0;
-	return ipr_offsets[idx];
-}
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-sh7206",
+	},
+};
 
 void __init init_IRQ_ipr(void)
 {
-	make_ipr_irq(sh7206_ipr_map, ARRAY_SIZE(sh7206_ipr_map));
+	register_ipr_controller(&ipr_irq_desc);
 }
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
index 1983fb7ad6e..a55b8ce2c54 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
@@ -48,7 +48,7 @@ static int __init sh7705_devices_setup(void)
 }
 __initcall(sh7705_devices_setup);
 
-static struct ipr_data sh7705_ipr_map[] = {
+static struct ipr_data ipr_irq_table[] = {
 	/* IRQ, IPR-idx, shift, priority */
 	{ 16, 0, 12, 2 }, /* TMU0 TUNI*/
 	{ 17, 0,  8, 2 }, /* TMU1 TUNI */
@@ -70,25 +70,29 @@ static struct ipr_data sh7705_ipr_map[] = {
 };
 
 static unsigned long ipr_offsets[] = {
-	0xFFFFFEE2	/* 0: IPRA */
-,	0xFFFFFEE4	/* 1: IPRB */
-,	0xA4000016	/* 2: IPRC */
-,	0xA4000018	/* 3: IPRD */
-,	0xA400001A	/* 4: IPRE */
-,	0xA4080000	/* 5: IPRF */
-,	0xA4080002	/* 6: IPRG */
-,	0xA4080004	/* 7: IPRH */
+	0xFFFFFEE2,	/* 0: IPRA */
+	0xFFFFFEE4,	/* 1: IPRB */
+	0xA4000016,	/* 2: IPRC */
+	0xA4000018,	/* 3: IPRD */
+	0xA400001A,	/* 4: IPRE */
+	0xA4080000,	/* 5: IPRF */
+	0xA4080002,	/* 6: IPRG */
+	0xA4080004,	/* 7: IPRH */
 };
 
-/* given the IPR index return the address of the IPR register */
-unsigned int map_ipridx_to_addr(int idx)
-{
-	if (idx >= ARRAY_SIZE(ipr_offsets))
-		return 0;
-	return ipr_offsets[idx];
-}
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-sh7705",
+	},
+};
 
-void __init init_IRQ_ipr()
+void __init init_IRQ_ipr(void)
 {
-	make_ipr_irq(sh7705_ipr_map, ARRAY_SIZE(sh7705_ipr_map));
+	register_ipr_controller(&ipr_irq_desc);
 }
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7709.c b/arch/sh/kernel/cpu/sh3/setup-sh7709.c
index c7d7c35fc83..c0265a96e7d 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7709.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7709.c
@@ -52,32 +52,66 @@ static int __init sh7709_devices_setup(void)
 }
 __initcall(sh7709_devices_setup);
 
-#define IPRx(A,N)	.addr=A, .shift=N
-#define IPRA(N)	IPRx(0xfffffee2UL,N)
-#define IPRB(N)	IPRx(0xfffffee4UL,N)
-#define IPRC(N)	IPRx(0xa4000016UL,N)
-#define IPRD(N)	IPRx(0xa4000018UL,N)
-#define IPRE(N)	IPRx(0xa400001aUL,N)
-
-static struct ipr_data sh7709_ipr_map[] = {
-	[16]		= { IPRA(12), 2 }, /* TMU TUNI0 */
-	[17]		= { IPRA(8),  4 }, /* TMU TUNI1 */
-	[18 ... 19]	= { IPRA(4),  1 }, /* TMU TUNI1 */
-	[20 ... 22]	= { IPRA(0),  2 }, /* RTC CUI */
-	[23 ... 26]	= { IPRB(4),  3 }, /* SCI */
-	[27]		= { IPRB(12), 2 }, /* WDT ITI */
-	[32]		= { IPRC(0),  1 }, /* IRQ 0 */
-	[33]		= { IPRC(4),  1 }, /* IRQ 1 */
-	[34]		= { IPRC(8),  1 }, /* IRQ 2 APM */
-	[35]		= { IPRC(12), 1 }, /* IRQ 3 TOUCHSCREEN */
-	[36]		= { IPRD(0),  1 }, /* IRQ 4 */
-	[37]		= { IPRD(4),  1 }, /* IRQ 5 */
-	[48 ... 51]	= { IPRE(12), 7 }, /* DMA */
-	[52 ... 55]	= { IPRE(8),  3 }, /* IRDA */
-	[56 ... 59]	= { IPRE(4),  3 }, /* SCIF */
+static struct ipr_data ipr_irq_table[] = {
+	{ 16, 0, 12, 2 }, /* TMU TUNI0 */
+	{ 17, 0, 8,  4 }, /* TMU TUNI1 */
+	{ 18, 0, 4,  1 }, /* TMU TUNI1 */
+	{ 19, 0, 4,  1 }, /* TMU TUNI1 */
+	{ 20, 0, 0,  2 }, /* RTC CUI */
+	{ 21, 0, 0,  2 }, /* RTC CUI */
+	{ 22, 0, 0,  2 }, /* RTC CUI */
+
+	{ 23, 1, 4,  3 }, /* SCI */
+	{ 24, 1, 4,  3 }, /* SCI */
+	{ 25, 1, 4,  3 }, /* SCI */
+	{ 26, 1, 4,  3 }, /* SCI */
+	{ 27, 1, 12, 3 }, /* WDT ITI */
+
+	{ 32, 2, 0,  1 }, /* IRQ 0 */
+	{ 33, 2, 4,  1 }, /* IRQ 1 */
+	{ 34, 2, 8,  1 }, /* IRQ 2 APM */
+	{ 35, 2, 12, 1 }, /* IRQ 3 TOUCHSCREEN */
+
+	{ 36, 3, 0,  1 }, /* IRQ 4 */
+	{ 37, 3, 4,  1 }, /* IRQ 5 */
+
+	{ 48, 4, 12, 7 }, /* DMA */
+	{ 49, 4, 12, 7 }, /* DMA */
+	{ 50, 4, 12, 7 }, /* DMA */
+	{ 51, 4, 12, 7 }, /* DMA */
+
+	{ 52, 4, 8,  3 }, /* IRDA */
+	{ 53, 4, 8,  3 }, /* IRDA */
+	{ 54, 4, 8,  3 }, /* IRDA */
+	{ 55, 4, 8,  3 }, /* IRDA */
+
+	{ 56, 4, 4,  3 }, /* SCIF */
+	{ 57, 4, 4,  3 }, /* SCIF */
+	{ 58, 4, 4,  3 }, /* SCIF */
+	{ 59, 4, 4,  3 }, /* SCIF */
+};
+
+static unsigned long ipr_offsets[] = {
+	0xfffffee2,	/* 0: IPRA */
+	0xfffffee4,	/* 1: IPRB */
+	0xa4000016,	/* 2: IPRC */
+	0xa4000018,	/* 3: IPRD */
+	0xa400001a,	/* 4: IPRE */
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-sh7709",
+	},
 };
 
-void __init init_IRQ_ipr()
+void __init init_IRQ_ipr(void)
 {
-	make_ipr_irq(sh7709_ipr_map, ARRAY_SIZE(sh7709_ipr_map));
+	register_ipr_controller(&ipr_irq_desc);
 }
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
index 51760a7e7f1..f40e6dac337 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
@@ -49,7 +49,7 @@ static int __init sh7710_devices_setup(void)
 }
 __initcall(sh7710_devices_setup);
 
-static struct ipr_data sh7710_ipr_map[] = {
+static struct ipr_data ipr_irq_table[] = {
 	/* IRQ, IPR-idx, shift, priority */
 	{ 16, 0, 12, 2 }, /* TMU0 TUNI*/
 	{ 17, 0,  8, 2 }, /* TMU1 TUNI */
@@ -78,26 +78,30 @@ static struct ipr_data sh7710_ipr_map[] = {
 };
 
 static unsigned long ipr_offsets[] = {
-	0xA414FEE2	/* 0: IPRA */
-,	0xA414FEE4	/* 1: IPRB */
-,	0xA4140016	/* 2: IPRC */
-,	0xA4140018	/* 3: IPRD */
-,	0xA414001A	/* 4: IPRE */
-,	0xA4080000	/* 5: IPRF */
-,	0xA4080002	/* 6: IPRG */
-,	0xA4080004	/* 7: IPRH */
-,	0xA4080006	/* 8: IPRI */
+	0xA414FEE2,	/* 0: IPRA */
+	0xA414FEE4,	/* 1: IPRB */
+	0xA4140016,	/* 2: IPRC */
+	0xA4140018,	/* 3: IPRD */
+	0xA414001A,	/* 4: IPRE */
+	0xA4080000,	/* 5: IPRF */
+	0xA4080002,	/* 6: IPRG */
+	0xA4080004,	/* 7: IPRH */
+	0xA4080006,	/* 8: IPRI */
 };
 
-/* given the IPR index return the address of the IPR register */
-unsigned int map_ipridx_to_addr(int idx)
-{
-	if (idx >= ARRAY_SIZE(ipr_offsets))
-		return 0;
-	return ipr_offsets[idx];
-}
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-sh7710",
+	},
+};
 
-void __init init_IRQ_ipr()
+void __init init_IRQ_ipr(void)
 {
-	make_ipr_irq(sh7710_ipr_map, ARRAY_SIZE(sh7710_ipr_map));
+	register_ipr_controller(&ipr_irq_desc);
 }
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
index 03b14cf78dd..da153bcdfeb 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
@@ -82,7 +82,7 @@ static int __init sh7750_devices_setup(void)
 }
 __initcall(sh7750_devices_setup);
 
-static struct ipr_data sh7750_ipr_map[] = {
+static struct ipr_data ipr_irq_table[] = {
 	/* IRQ, IPR-idx, shift, priority */
 	{ 16, 0, 12, 2 }, /* TMU0 TUNI*/
 	{ 17, 0, 12, 2 }, /* TMU1 TUNI */
@@ -106,8 +106,27 @@ static struct ipr_data sh7750_ipr_map[] = {
 	{ 38, 2,  8, 7 }, /* DMAC DMAE */
 };
 
+static unsigned long ipr_offsets[] = {
+	0xffd00004UL,	/* 0: IPRA */
+	0xffd00008UL,	/* 1: IPRB */
+	0xffd0000cUL,	/* 2: IPRC */
+	0xffd00010UL,	/* 3: IPRD */
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-sh7750",
+	},
+};
+
 #ifdef CONFIG_CPU_SUBTYPE_SH7751
-static struct ipr_data sh7751_ipr_map[] = {
+static struct ipr_data ipr_irq_table_sh7751[] = {
 	{ 44, 2,  8, 7 }, /* DMAC DMTE4 */
 	{ 45, 2,  8, 7 }, /* DMAC DMTE5 */
 	{ 46, 2,  8, 7 }, /* DMAC DMTE6 */
@@ -118,21 +137,26 @@ static struct ipr_data sh7751_ipr_map[] = {
 	/*{ 72, INTPRI00,  8, ? },*/ /* TMU3 TUNI */
 	/*{ 76, INTPRI00, 12, ? },*/ /* TMU4 TUNI */
 };
-#endif
 
-static unsigned long ipr_offsets[] = {
-	0xffd00004UL,	/* 0: IPRA */
-	0xffd00008UL,	/* 1: IPRB */
-	0xffd0000cUL,	/* 2: IPRC */
-	0xffd00010UL,	/* 3: IPRD */
+static struct ipr_desc ipr_irq_desc_sh7751 = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table_sh7751,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table_sh7751),
+
+	.chip = {
+		.name	= "IPR-sh7751",
+	},
 };
+#endif
 
-/* given the IPR index return the address of the IPR register */
-unsigned int map_ipridx_to_addr(int idx)
+void __init init_IRQ_ipr(void)
 {
-	if (idx >= ARRAY_SIZE(ipr_offsets))
-		return 0;
-	return ipr_offsets[idx];
+	register_ipr_controller(&ipr_irq_desc);
+#ifdef CONFIG_CPU_SUBTYPE_SH7751
+	register_ipr_controller(&ipr_irq_desc_sh7751);
+#endif
 }
 
 #define INTC_ICR	0xffd00000UL
@@ -143,11 +167,3 @@ void ipr_irq_enable_irlm(void)
 {
 	ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
 }
-
-void __init init_IRQ_ipr()
-{
-	make_ipr_irq(sh7750_ipr_map, ARRAY_SIZE(sh7750_ipr_map));
-#ifdef CONFIG_CPU_SUBTYPE_SH7751
-	make_ipr_irq(sh7751_ipr_map, ARRAY_SIZE(sh7751_ipr_map));
-#endif
-}
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
index 6d3c9189777..3df16975567 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
@@ -109,7 +109,12 @@ static struct intc2_desc intc2_irq_desc __read_mostly = {
 	},
 };
 
-static struct ipr_data sh7760_ipr_map[] = {
+void __init init_IRQ_intc2(void)
+{
+	register_intc2_controller(&intc2_irq_desc);
+}
+
+static struct ipr_data ipr_irq_table[] = {
 	/* IRQ, IPR-idx, shift, priority */
 	{ 16, 0, 12, 2 }, /* TMU0 TUNI*/
 	{ 17, 0,  8, 2 }, /* TMU1 TUNI */
@@ -146,20 +151,19 @@ static unsigned long ipr_offsets[] = {
 	0xffd00010UL,	/* 3: IPRD */
 };
 
-/* given the IPR index return the address of the IPR register */
-unsigned int map_ipridx_to_addr(int idx)
-{
-	if (idx >= ARRAY_SIZE(ipr_offsets))
-		return 0;
-	return ipr_offsets[idx];
-}
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
 
-void __init init_IRQ_intc2(void)
-{
-	register_intc2_controller(&intc2_irq_desc);
-}
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-sh7760",
+	},
+};
 
-void __init  init_IRQ_ipr(void)
+void __init init_IRQ_ipr(void)
 {
-	make_ipr_irq(sh7760_ipr_map, ARRAY_SIZE(sh7760_ipr_map));
+	register_ipr_controller(&ipr_irq_desc);
 }
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index fa07fab4797..a3e159ef6df 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -44,7 +44,7 @@ static int __init sh7722_devices_setup(void)
 }
 __initcall(sh7722_devices_setup);
 
-static struct ipr_data sh7722_ipr_map[] = {
+static struct ipr_data ipr_irq_table[] = {
 	/* IRQ, IPR-idx, shift, prio */
 	{ 16, 0, 12, 2 }, /* TMU0 */
 	{ 17, 0,  8, 2 }, /* TMU1 */
@@ -69,16 +69,21 @@ static unsigned long ipr_offsets[] = {
 	0xa408002c, /* 11: IPRL */
 };
 
-unsigned int map_ipridx_to_addr(int idx)
-{
-	if (unlikely(idx >= ARRAY_SIZE(ipr_offsets)))
-		return 0;
-	return ipr_offsets[idx];
-}
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-sh7722",
+	},
+};
 
 void __init init_IRQ_ipr(void)
 {
-	make_ipr_irq(sh7722_ipr_map, ARRAY_SIZE(sh7722_ipr_map));
+	register_ipr_controller(&ipr_irq_desc);
 }
 
 void __init plat_mem_setup(void)
-- 
cgit v1.2.3


From eee4c4694fb2936258244bb391e6eec07f3eea8e Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 15 Jun 2007 19:45:33 +0900
Subject: sh: Update SH-2/SH-2A defconfigs.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/configs/se7206_defconfig | 272 +++++++++++++--------------------------
 arch/sh/configs/se7619_defconfig | 215 ++++++++++---------------------
 2 files changed, 159 insertions(+), 328 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 87ab9080fd1..f2f2a3c9c32 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,18 +1,22 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19
-# Wed Dec  6 14:40:15 2006
+# Linux kernel version: 2.6.22-rc4
+# Fri Jun 15 19:37:46 2007
 #
 CONFIG_SUPERH=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 # CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -34,8 +38,10 @@ CONFIG_LOCALVERSION=""
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -48,12 +54,17 @@ CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
+CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
-CONFIG_SLAB=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 # CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
-# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -83,53 +94,10 @@ CONFIG_DEFAULT_IOSCHED="noop"
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-CONFIG_SH_7206_SOLUTION_ENGINE=y
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH2=y
 CONFIG_CPU_SH2A=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
 CONFIG_CPU_SUBTYPE_SH7206=y
-
-#
-# SH-3 Processor Support
-#
 # CONFIG_CPU_SUBTYPE_SH7300 is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
@@ -137,10 +105,7 @@ CONFIG_CPU_SUBTYPE_SH7206=y
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -149,32 +114,28 @@ CONFIG_CPU_SUBTYPE_SH7206=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
 # CONFIG_CPU_SUBTYPE_ST40STB1 is not set
 # CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
 # CONFIG_CPU_SUBTYPE_SH73180 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_PAGE_OFFSET=0x00000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
@@ -184,35 +145,42 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
 # CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
 
 #
 # Processor features
 #
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_SH_FPU is not set
 # CONFIG_SH_FPU_EMU is not set
 # CONFIG_SH_DSP is not set
+CONFIG_CPU_HAS_IPR_IRQ=y
+
+#
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_7206_SOLUTION_ENGINE=y
 
 #
-# Timer support
+# Timer and clock configuration
 #
 CONFIG_SH_CMT=y
 # CONFIG_SH_MTU2 is not set
 CONFIG_SH_TIMER_IRQ=140
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_SH_PCLK_FREQ=33333333
 CONFIG_SH_CLK_MD=6
+# CONFIG_TICK_ONESHOT is not set
 
 #
 # CPU Frequency scaling
@@ -227,11 +195,11 @@ CONFIG_SH_CLK_MD=6
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
 
 #
 # Additional SuperH Device Drivers
 #
+# CONFIG_HEARTBEAT is not set
 # CONFIG_PUSH_SWITCH is not set
 
 #
@@ -239,10 +207,11 @@ CONFIG_SH_CLK_MD=6
 #
 CONFIG_HZ_100=y
 # CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -252,22 +221,17 @@ CONFIG_PREEMPT_NONE=y
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
 # CONFIG_CMDLINE_BOOL is not set
 
 #
 # Bus options
 #
-# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
 #
 
-#
-# PCI Hotplug Support
-#
-
 #
 # Executable file formats
 #
@@ -276,11 +240,6 @@ CONFIG_BINFMT_ZFLAT=y
 # CONFIG_BINFMT_SHARED_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
 #
 # Networking
 #
@@ -289,7 +248,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 # CONFIG_PACKET is not set
 # CONFIG_UNIX is not set
 # CONFIG_NET_KEY is not set
@@ -314,25 +272,14 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -358,7 +305,16 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
 
 #
 # Device Drivers
@@ -375,10 +331,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Connector - unified userspace <-> kernelspace linker
 #
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
@@ -393,6 +345,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
@@ -424,7 +377,6 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -452,16 +404,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
 
 #
-# OneNAND Flash Device Drivers
+# UBI - Unsorted block images
 #
-# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_UBI is not set
 
 #
 # Parallel port support
@@ -471,6 +420,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -479,18 +429,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
 #
 # Misc devices
 #
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLINK is not set
 # CONFIG_IDE is not set
 
 #
@@ -499,10 +444,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
 
 #
@@ -510,19 +451,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4
 #
 # CONFIG_MD is not set
 
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
 #
 # Network device support
 #
@@ -531,10 +459,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
 
 #
@@ -544,27 +468,14 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -604,6 +515,7 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -639,29 +551,15 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # IPMI
 #
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 # CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
 
 #
@@ -674,27 +572,30 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # Dallas's 1-wire bus
 #
 # CONFIG_W1 is not set
+# CONFIG_HWMON is not set
 
 #
-# Hardware Monitoring support
+# Multifunction device drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
 # CONFIG_FB is not set
 
 #
@@ -702,6 +603,12 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 #
 # CONFIG_SOUND is not set
 
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
 #
 # USB support
 #
@@ -717,10 +624,6 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
 
 #
@@ -802,7 +705,6 @@ CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 # CONFIG_SYSFS is not set
 # CONFIG_TMPFS is not set
-# CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 
@@ -816,7 +718,6 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
@@ -848,6 +749,11 @@ CONFIG_MSDOS_PARTITION=y
 #
 # CONFIG_NLS is not set
 
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
 #
 # Profiling support
 #
@@ -861,14 +767,11 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_UNWIND_INFO is not set
-# CONFIG_HEADERS_CHECK is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
 
 #
 # Security options
@@ -883,8 +786,13 @@ CONFIG_LOG_BUF_SHIFT=14
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig
index 20ac7f4c53f..3a3c3c1f507 100644
--- a/arch/sh/configs/se7619_defconfig
+++ b/arch/sh/configs/se7619_defconfig
@@ -1,18 +1,22 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19
-# Wed Dec  6 16:35:36 2006
+# Linux kernel version: 2.6.22-rc4
+# Fri Jun 15 19:43:06 2007
 #
 CONFIG_SUPERH=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 # CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -31,8 +35,10 @@ CONFIG_LOCALVERSION=""
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_UTS_NS is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -45,12 +51,17 @@ CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
+CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
-CONFIG_SLAB=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 # CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
-# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -80,52 +91,9 @@ CONFIG_DEFAULT_IOSCHED="noop"
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-CONFIG_SH_7619_SOLUTION_ENGINE=y
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH2=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 CONFIG_CPU_SUBTYPE_SH7619=y
-
-#
-# SH-2A Processor Support
-#
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
 # CONFIG_CPU_SUBTYPE_SH7300 is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
@@ -133,10 +101,7 @@ CONFIG_CPU_SUBTYPE_SH7619=y
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -145,32 +110,28 @@ CONFIG_CPU_SUBTYPE_SH7619=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
 # CONFIG_CPU_SUBTYPE_ST40STB1 is not set
 # CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
 # CONFIG_CPU_SUBTYPE_SH73180 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_PAGE_OFFSET=0x00000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
@@ -180,34 +141,41 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
 CONFIG_SH_WRITETHROUGH=y
-# CONFIG_SH_OCRAM is not set
 
 #
 # Processor features
 #
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_SH_FPU is not set
 # CONFIG_SH_FPU_EMU is not set
 # CONFIG_SH_DSP is not set
+CONFIG_CPU_HAS_IPR_IRQ=y
+
+#
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_7619_SOLUTION_ENGINE=y
 
 #
-# Timer support
+# Timer and clock configuration
 #
 CONFIG_SH_CMT=y
 CONFIG_SH_TIMER_IRQ=86
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_SH_PCLK_FREQ=31250000
 CONFIG_SH_CLK_MD=5
+# CONFIG_TICK_ONESHOT is not set
 
 #
 # CPU Frequency scaling
@@ -222,11 +190,11 @@ CONFIG_SH_CLK_MD=5
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
 
 #
 # Additional SuperH Device Drivers
 #
+# CONFIG_HEARTBEAT is not set
 # CONFIG_PUSH_SWITCH is not set
 
 #
@@ -234,10 +202,11 @@ CONFIG_SH_CLK_MD=5
 #
 CONFIG_HZ_100=y
 # CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -247,22 +216,17 @@ CONFIG_PREEMPT_NONE=y
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
 # CONFIG_CMDLINE_BOOL is not set
 
 #
 # Bus options
 #
-# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
 #
 
-#
-# PCI Hotplug Support
-#
-
 #
 # Executable file formats
 #
@@ -271,11 +235,6 @@ CONFIG_BINFMT_ZFLAT=y
 # CONFIG_BINFMT_SHARED_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
 #
 # Networking
 #
@@ -295,10 +254,6 @@ CONFIG_BINFMT_ZFLAT=y
 #
 # Connector - unified userspace <-> kernelspace linker
 #
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
@@ -313,6 +268,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
@@ -344,7 +300,6 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -372,16 +327,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
 
 #
-# OneNAND Flash Device Drivers
+# UBI - Unsorted block images
 #
-# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_UBI is not set
 
 #
 # Parallel port support
@@ -391,6 +343,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -398,17 +351,12 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
 # Misc devices
 #
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLINK is not set
 # CONFIG_IDE is not set
 
 #
@@ -417,10 +365,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
 
 #
@@ -428,19 +372,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 # CONFIG_MD is not set
 
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
 #
 # ISDN subsystem
 #
@@ -471,6 +402,7 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -506,29 +438,15 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # IPMI
 #
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 # CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
 
 #
@@ -541,26 +459,29 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # Dallas's 1-wire bus
 #
 # CONFIG_W1 is not set
+# CONFIG_HWMON is not set
 
 #
-# Hardware Monitoring support
+# Multifunction device drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_DAB=y
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
 # CONFIG_FB is not set
 
 #
@@ -568,6 +489,12 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 #
 # CONFIG_SOUND is not set
 
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
 #
 # USB support
 #
@@ -583,10 +510,6 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
 
 #
@@ -668,7 +591,6 @@ CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 # CONFIG_SYSFS is not set
 # CONFIG_TMPFS is not set
-# CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 
@@ -682,7 +604,6 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
@@ -715,14 +636,11 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_UNWIND_INFO is not set
-# CONFIG_HEADERS_CHECK is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
 
 #
 # Security options
@@ -737,8 +655,13 @@ CONFIG_LOG_BUF_SHIFT=14
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From 0630e45c887b3d3d8d6ad27af03ec4054926d635 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 18 Jun 2007 19:02:47 +0900
Subject: sh: Check oops_may_print() in unhandled fault.

Only print out pgd/pte data in the oops path if oops_may_print()
holds true. Follows the i386 implementation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/fault.c | 45 +++++++++++++++++++++++++++++----------------
 1 file changed, 29 insertions(+), 16 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c
index c878faa4ae4..0b3eaf6fbb2 100644
--- a/arch/sh/mm/fault.c
+++ b/arch/sh/mm/fault.c
@@ -32,7 +32,6 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 	struct task_struct *tsk;
 	struct mm_struct *mm;
 	struct vm_area_struct * vma;
-	unsigned long page;
 	int si_code;
 	siginfo_t info;
 
@@ -170,24 +169,38 @@ no_context:
  * terminate things with extreme prejudice.
  *
  */
-	if (address < PAGE_SIZE)
-		printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
-	else
-		printk(KERN_ALERT "Unable to handle kernel paging request");
-	printk(" at virtual address %08lx\n", address);
-	printk(KERN_ALERT "pc = %08lx\n", regs->pc);
-	page = (unsigned long)get_TTB();
-	if (page) {
-		page = ((unsigned long *) page)[address >> PGDIR_SHIFT];
-		printk(KERN_ALERT "*pde = %08lx\n", page);
-		if (page & _PAGE_PRESENT) {
-			page &= PAGE_MASK;
-			address &= 0x003ff000;
-			page = ((unsigned long *) __va(page))[address >> PAGE_SHIFT];
-			printk(KERN_ALERT "*pte = %08lx\n", page);
+
+	bust_spinlocks(1);
+
+	if (oops_may_print()) {
+		__typeof__(pte_val(__pte(0))) page;
+
+		if (address < PAGE_SIZE)
+			printk(KERN_ALERT "Unable to handle kernel NULL "
+					  "pointer dereference");
+		else
+			printk(KERN_ALERT "Unable to handle kernel paging "
+					  "request");
+		printk(" at virtual address %08lx\n", address);
+		printk(KERN_ALERT "pc = %08lx\n", regs->pc);
+		page = (unsigned long)get_TTB();
+		if (page) {
+			page = ((__typeof__(page) *) __va(page))[address >>
+								 PGDIR_SHIFT];
+			printk(KERN_ALERT "*pde = %08lx\n", page);
+			if (page & _PAGE_PRESENT) {
+				page &= PAGE_MASK;
+				address &= 0x003ff000;
+				page = ((__typeof__(page) *)
+						__va(page))[address >>
+							    PAGE_SHIFT];
+				printk(KERN_ALERT "*pte = %08lx\n", page);
+			}
 		}
 	}
+
 	die("Oops", regs, writeaccess);
+	bust_spinlocks(0);
 	do_exit(SIGKILL);
 
 /*
-- 
cgit v1.2.3


From 824e55f95f871d492cd095d7694df3cfcad1f8f5 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 20 Jun 2007 18:01:52 +0900
Subject: sh: Fix up cf-enabler dependency for SE boards.

This was using CONFIG_SH_SOLUTION_ENGINE, where we really wanted
CONFIG_SOLUTION_ENGINE. While we're at it, move the whole CF
enabler mess somewhere better suited.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig | 87 ++++++++++++++++++++++++++++-----------------------------
 1 file changed, 43 insertions(+), 44 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index b16407c9f2c..924efe5b8c2 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -404,50 +404,6 @@ source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
 source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
 source "arch/sh/boards/renesas/r7780rp/Kconfig"
 
-config CF_ENABLER
-	bool "Compact Flash Enabler support"
-	depends on SH_SOLUTION_ENGINE || SH_SH03
-	---help---
-	  Compact Flash is a small, removable mass storage device introduced
-	  in 1994 originally as a PCMCIA device.  If you say `Y' here, you
-	  compile in support for Compact Flash devices directly connected to
-	  a SuperH processor.  A Compact Flash FAQ is available at
-	  <http://www.compactflash.org/faqs/faq.htm>.
-
-	  If your board has "Directly Connected" CompactFlash at area 5 or 6,
-	  you may want to enable this option.  Then, you can use CF as
-	  primary IDE drive (only tested for SanDisk).
-
-	  If in doubt, select 'N'.
-
-choice
-	prompt "Compact Flash Connection Area"
-	depends on CF_ENABLER
-	default CF_AREA6
-
-config CF_AREA5
-	bool "Area5"
-	help
-	  If your board has "Directly Connected" CompactFlash, You should
-	  select the area where your CF is connected to.
-
-	  - "Area5" if CompactFlash is connected to Area 5 (0x14000000)
-	  - "Area6" if it is connected to Area 6 (0x18000000)
-
-	  "Area6" will work for most boards.
-
-config CF_AREA6
-	bool "Area6"
-
-endchoice
-
-config CF_BASE_ADDR
-	hex
-	depends on CF_ENABLER
-	default "0xb8000000" if CF_AREA6
-	default "0xb4000000" if CF_AREA5
-
-
 menu "Timer and clock configuration"
 
 config SH_TMU
@@ -705,6 +661,49 @@ config SUPERHYWAY
 	tristate "SuperHyway Bus support"
 	depends on CPU_SUBTYPE_SH4_202
 
+config CF_ENABLER
+	bool "Compact Flash Enabler support"
+	depends on SOLUTION_ENGINE || SH_SH03
+	---help---
+	  Compact Flash is a small, removable mass storage device introduced
+	  in 1994 originally as a PCMCIA device.  If you say `Y' here, you
+	  compile in support for Compact Flash devices directly connected to
+	  a SuperH processor.  A Compact Flash FAQ is available at
+	  <http://www.compactflash.org/faqs/faq.htm>.
+
+	  If your board has "Directly Connected" CompactFlash at area 5 or 6,
+	  you may want to enable this option.  Then, you can use CF as
+	  primary IDE drive (only tested for SanDisk).
+
+	  If in doubt, select 'N'.
+
+choice
+	prompt "Compact Flash Connection Area"
+	depends on CF_ENABLER
+	default CF_AREA6
+
+config CF_AREA5
+	bool "Area5"
+	help
+	  If your board has "Directly Connected" CompactFlash, You should
+	  select the area where your CF is connected to.
+
+	  - "Area5" if CompactFlash is connected to Area 5 (0x14000000)
+	  - "Area6" if it is connected to Area 6 (0x18000000)
+
+	  "Area6" will work for most boards.
+
+config CF_AREA6
+	bool "Area6"
+
+endchoice
+
+config CF_BASE_ADDR
+	hex
+	depends on CF_ENABLER
+	default "0xb8000000" if CF_AREA6
+	default "0xb4000000" if CF_AREA5
+
 source "arch/sh/drivers/pci/Kconfig"
 
 source "drivers/pci/Kconfig"
-- 
cgit v1.2.3


From b2309d684078f2be1d5db6ceabc99c51f9af3b6b Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 20 Jun 2007 18:09:10 +0900
Subject: sh: Update se7722 defconfig.

Hook up the multi-node stuff for the SE7722.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/configs/se7722_defconfig | 287 +++++++++++++--------------------------
 1 file changed, 96 insertions(+), 191 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/configs/se7722_defconfig b/arch/sh/configs/se7722_defconfig
index ca4c663dfa3..764b813c405 100644
--- a/arch/sh/configs/se7722_defconfig
+++ b/arch/sh/configs/se7722_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc7
-# Fri Apr 27 16:30:30 2007
+# Linux kernel version: 2.6.22-rc4
+# Wed Jun 20 18:08:04 2007
 #
 CONFIG_SUPERH=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
@@ -11,7 +11,9 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
@@ -43,6 +45,7 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_SYSFS_DEPRECATED is not set
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -60,14 +63,20 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -103,57 +112,12 @@ CONFIG_DEFAULT_IOSCHED="noop"
 #
 # System type
 #
-CONFIG_SOLUTION_ENGINE=y
-# CONFIG_SH_SOLUTION_ENGINE is not set
-CONFIG_SH_7722_SOLUTION_ENGINE=y
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7780_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_LBOX_RE2 is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SH4AL_DSP=y
 CONFIG_CPU_SHX2=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
 # CONFIG_CPU_SUBTYPE_SH7300 is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
@@ -162,10 +126,6 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
-
-#
-# SH-4 Processor Support
-#
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -174,23 +134,11 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
 # CONFIG_CPU_SUBTYPE_ST40STB1 is not set
 # CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
 # CONFIG_CPU_SUBTYPE_SH73180 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 CONFIG_CPU_SUBTYPE_SH7722=y
@@ -198,15 +146,21 @@ CONFIG_CPU_SUBTYPE_SH7722=y
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
-# CONFIG_32BIT is not set
 # CONFIG_X2TLB is not set
 CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_NUMA=y
+CONFIG_NODES_SHIFT=1
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=2
 CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
@@ -216,26 +170,25 @@ CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
 # CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
+# CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
 # CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
 
 #
 # Processor features
@@ -251,13 +204,21 @@ CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_PTEA=y
 
+#
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_7722_SOLUTION_ENGINE=y
+
 #
 # Timer and clock configuration
 #
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
-CONFIG_NO_IDLE_HZ=y
 CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 
 #
 # CPU Frequency scaling
@@ -272,7 +233,6 @@ CONFIG_SH_PCLK_FREQ=33333333
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
 
 #
 # Additional SuperH Device Drivers
@@ -290,7 +250,6 @@ CONFIG_HZ_250=y
 CONFIG_HZ=250
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
-# CONFIG_SMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
@@ -307,29 +266,23 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 # Bus options
 #
-# CONFIG_PCI is not set
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+CONFIG_CF_BASE_ADDR=0xb8000000
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
 #
 # CONFIG_PCCARD is not set
 
-#
-# PCI Hotplug Support
-#
-
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
 #
 # Networking
 #
@@ -338,7 +291,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -375,20 +327,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -414,7 +354,16 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
 
 #
 # Device Drivers
@@ -432,10 +381,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # Connector - unified userspace <-> kernelspace linker
 #
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
 
 #
@@ -464,10 +409,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # Misc devices
 #
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLINK is not set
 # CONFIG_IDE is not set
 
 #
@@ -496,6 +438,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -511,10 +454,6 @@ CONFIG_BLK_DEV_SD=y
 #
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_PATA_PLATFORM=y
@@ -524,19 +463,6 @@ CONFIG_PATA_PLATFORM=y
 #
 # CONFIG_MD is not set
 
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
 #
 # Network device support
 #
@@ -545,10 +471,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
 
 #
@@ -558,27 +480,14 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -627,6 +536,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -667,14 +577,8 @@ CONFIG_LEGACY_PTY_COUNT=256
 # IPMI
 #
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 # CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -682,10 +586,6 @@ CONFIG_HW_RANDOM=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
 
 #
@@ -698,16 +598,15 @@ CONFIG_HW_RANDOM=y
 # Dallas's 1-wire bus
 #
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
@@ -719,16 +618,19 @@ CONFIG_HWMON=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
 # CONFIG_FB is not set
 
 #
@@ -757,10 +659,6 @@ CONFIG_HID=y
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
 
 #
@@ -800,17 +698,29 @@ CONFIG_RTC_INTF_SYSFS=y
 CONFIG_RTC_INTF_PROC=y
 CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# RTC drivers
+# I2C RTC drivers
+#
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
 #
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SH=y
-# CONFIG_RTC_DRV_TEST is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+
 #
 # DMA Engine support
 #
@@ -824,14 +734,6 @@ CONFIG_RTC_DRV_SH=y
 # DMA Devices
 #
 
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
 #
 # File systems
 #
@@ -937,23 +839,24 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Profiling support
 #
-# CONFIG_PROFILING is not set
+CONFIG_PROFILING=y
+# CONFIG_OPROFILE is not set
 
 #
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK_TIME=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_SH_STANDARD_BIOS is not set
+CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_EARLY_PRINTK is not set
 # CONFIG_SH_KGDB is not set
 
 #
@@ -973,8 +876,10 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From 027e56e68543780870fda74360ca45e392c50e1c Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 20 Jun 2007 18:23:49 +0900
Subject: sh: Hook up hard_smp_processor_id() for INTC2 block.

We need to know the CPU ID in order to calculate the mask and ack
registers effectively. Stub this in for UP.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/irq/intc2.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/cpu/irq/intc2.c b/arch/sh/kernel/cpu/irq/intc2.c
index dae02d3152e..cc5221390e0 100644
--- a/arch/sh/kernel/cpu/irq/intc2.c
+++ b/arch/sh/kernel/cpu/irq/intc2.c
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <asm/smp.h>
 
 static inline struct intc2_desc *get_intc2_desc(unsigned int irq)
 {
@@ -24,14 +25,18 @@ static void disable_intc2_irq(unsigned int irq)
 {
 	struct intc2_data *p = get_irq_chip_data(irq);
 	struct intc2_desc *d = get_intc2_desc(irq);
-	ctrl_outl(1 << p->msk_shift, d->msk_base + p->msk_offset);
+
+	ctrl_outl(1 << p->msk_shift, d->msk_base + p->msk_offset +
+				     (hard_smp_processor_id() * 4));
 }
 
 static void enable_intc2_irq(unsigned int irq)
 {
 	struct intc2_data *p = get_irq_chip_data(irq);
 	struct intc2_desc *d = get_intc2_desc(irq);
-	ctrl_outl(1 << p->msk_shift, d->mskclr_base + p->msk_offset);
+
+	ctrl_outl(1 << p->msk_shift, d->mskclr_base + p->msk_offset +
+				     (hard_smp_processor_id() * 4));
 }
 
 /*
-- 
cgit v1.2.3


From 2b1bd1ac5d4bffe3fd542bfe1784a583bd7df4fa Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 20 Jun 2007 18:27:10 +0900
Subject: sh: Preliminary support for the SH-X3 CPU.

This adds basic support for UP SH-X3.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig                      |   1 +
 arch/sh/configs/shx3_defconfig       | 756 +++++++++++++++++++++++++++++++++++
 arch/sh/kernel/cpu/sh3/entry.S       |  19 +
 arch/sh/kernel/cpu/sh4/probe.c       |   8 +
 arch/sh/kernel/cpu/sh4a/Makefile     |   2 +
 arch/sh/kernel/cpu/sh4a/clock-shx3.c | 135 +++++++
 arch/sh/kernel/cpu/sh4a/setup-shx3.c |  85 ++++
 arch/sh/kernel/setup.c               |   2 +-
 arch/sh/kernel/timers/timer-tmu.c    |   7 +-
 arch/sh/mm/Kconfig                   |   9 +
 10 files changed, 1020 insertions(+), 4 deletions(-)
 create mode 100644 arch/sh/configs/shx3_defconfig
 create mode 100644 arch/sh/kernel/cpu/sh4a/clock-shx3.c
 create mode 100644 arch/sh/kernel/cpu/sh4a/setup-shx3.c

(limited to 'arch/sh')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index b16407c9f2c..d82caffd1da 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -598,6 +598,7 @@ config NR_CPUS
 	int "Maximum number of CPUs (2-32)"
 	range 2 32
 	depends on SMP
+	default "4" if CPU_SHX3
 	default "2"
 	help
 	  This allows you to specify the maximum number of CPUs which this
diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig
new file mode 100644
index 00000000000..219bad558b1
--- /dev/null
+++ b/arch/sh/configs/shx3_defconfig
@@ -0,0 +1,756 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc4
+# Wed Jun 20 14:09:27 2007
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_UTS_NS is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX3=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+CONFIG_CPU_SUBTYPE_SHX3=y
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
+# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+# CONFIG_SH_FPU is not set
+# CONFIG_SH_FPU_EMU is not set
+CONFIG_SH_DSP=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_INTC2_IRQ=y
+CONFIG_CPU_HAS_SR_RB=y
+
+#
+# Board support
+#
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=50000000
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_BKL=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200 ip=192.168.1.2:::255.255.255.0 root=/dev/nfs nfsroot=192.168.1.1:/exports/devel/rfs/mobiler noaliencache earlyprintk=bios ignore_loglevel"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_PATA_PLATFORM=y
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# ISDN subsystem
+#
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+# CONFIG_HID is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+# CONFIG_OPROFILE is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_SLAB_LEAK=y
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+# CONFIG_PROVE_LOCKING is not set
+CONFIG_LOCKDEP=y
+CONFIG_DEBUG_LOCKDEP=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_VM=y
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_SH_STANDARD_BIOS=y
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_BOOTMEM is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_4KSTACKS is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index b0b59d4a33c..d8e122971c3 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -340,8 +340,27 @@ ENTRY(vbr_base)
 general_exception:
 	mov.l	1f, k2
 	mov.l	2f, k3
+#ifdef CONFIG_CPU_SUBTYPE_SHX3
+	mov.l	@k2, k2
+
+	! Is EXPEVT larger than 0x800?
+	mov	#0x8, k0
+	shll8	k0
+	cmp/hs	k0, k2
+	bf	0f
+
+	! then add 0x580 (k2 is 0xd80 or 0xda0)
+	mov	#0x58, k0
+	shll2	k0
+	shll2	k0
+	add	k0, k2
+0:
+	bra	handle_exception
+	 nop
+#else
 	bra	handle_exception
 	 mov.l	@k2, k2
+#endif
 	.align	2
 1:	.long	EXPEVT
 2:	.long	ret_from_exception
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index fab2eb07196..66c3f75647b 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -141,6 +141,14 @@ int __init detect_cpu_and_cache_system(void)
 			current_cpu_data.flags |= CPU_HAS_LLSC;
 		}
 		break;
+	case 0x4000:	/* 1st cut */
+	case 0x4001:	/* 2nd cut */
+		current_cpu_data.type = CPU_SHX3;
+		current_cpu_data.icache.ways = 4;
+		current_cpu_data.dcache.ways = 4;
+		current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
+					  CPU_HAS_LLSC;
+		break;
 	case 0x8000:
 		current_cpu_data.type = CPU_ST40RA;
 		current_cpu_data.flags |= CPU_HAS_FPU;
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index ab7422f8f82..40062328648 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7785)	+= setup-sh7785.o
 obj-$(CONFIG_CPU_SUBTYPE_SH73180)	+= setup-sh73180.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7343)	+= setup-sh7343.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7722)	+= setup-sh7722.o
+obj-$(CONFIG_CPU_SUBTYPE_SHX3)		+= setup-shx3.o
 
 # Primary on-chip clocks (common)
 clock-$(CONFIG_CPU_SUBTYPE_SH73180)	:= clock-sh73180.o
@@ -17,5 +18,6 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7780)	:= clock-sh7780.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7785)	:= clock-sh7785.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7343.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7722)	:= clock-sh7722.o
+clock-$(CONFIG_CPU_SUBTYPE_SHX3)	:= clock-shx3.o
 
 obj-y	+= $(clock-y)
diff --git a/arch/sh/kernel/cpu/sh4a/clock-shx3.c b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
new file mode 100644
index 00000000000..c630b29e06a
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
@@ -0,0 +1,135 @@
+/*
+ * arch/sh/kernel/cpu/sh4/clock-shx3.c
+ *
+ * SH-X3 support for the clock framework
+ *
+ *  Copyright (C) 2006-2007  Renesas Technology Corp.
+ *  Copyright (C) 2006-2007  Renesas Solutions Corp.
+ *  Copyright (C) 2006-2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int ifc_divisors[] = { 1, 2, 4 ,6 };
+static int bfc_divisors[] = { 1, 1, 1, 1, 1, 12, 16, 18, 24, 32, 36, 48 };
+static int pfc_divisors[] = { 1, 1, 1, 1, 1, 1, 1, 18, 24, 32, 36, 48 };
+static int cfc_divisors[] = { 1, 1, 4, 6 };
+
+#define IFC_POS		28
+#define IFC_MSK		0x0003
+#define BFC_MSK		0x000f
+#define PFC_MSK		0x000f
+#define CFC_MSK		0x0003
+#define BFC_POS		16
+#define PFC_POS		0
+#define CFC_POS		20
+
+static void master_clk_init(struct clk *clk)
+{
+	clk->rate *= pfc_divisors[(ctrl_inl(FRQCR) >> PFC_POS) & PFC_MSK];
+}
+
+static struct clk_ops shx3_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+	int idx = ((ctrl_inl(FRQCR) >> PFC_POS) & PFC_MSK);
+	clk->rate = clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct clk_ops shx3_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+	int idx = ((ctrl_inl(FRQCR) >> BFC_POS) & BFC_MSK);
+	clk->rate = clk->parent->rate / bfc_divisors[idx];
+}
+
+static struct clk_ops shx3_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+	int idx = ((ctrl_inl(FRQCR) >> IFC_POS) & IFC_MSK);
+	clk->rate = clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct clk_ops shx3_cpu_clk_ops = {
+	.recalc		= cpu_clk_recalc,
+};
+
+static struct clk_ops *shx3_clk_ops[] = {
+	&shx3_master_clk_ops,
+	&shx3_module_clk_ops,
+	&shx3_bus_clk_ops,
+	&shx3_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+	if (idx < ARRAY_SIZE(shx3_clk_ops))
+		*ops = shx3_clk_ops[idx];
+}
+
+static void shyway_clk_recalc(struct clk *clk)
+{
+	int idx = ((ctrl_inl(FRQCR) >> CFC_POS) & CFC_MSK);
+	clk->rate = clk->parent->rate / cfc_divisors[idx];
+}
+
+static struct clk_ops shx3_shyway_clk_ops = {
+	.recalc		= shyway_clk_recalc,
+};
+
+static struct clk shx3_shyway_clk = {
+	.name		= "shyway_clk",
+	.flags		= CLK_ALWAYS_ENABLED,
+	.ops		= &shx3_shyway_clk_ops,
+};
+
+/*
+ * Additional SHx3-specific on-chip clocks that aren't already part of the
+ * clock framework
+ */
+static struct clk *shx3_onchip_clocks[] = {
+	&shx3_shyway_clk,
+};
+
+static int __init shx3_clk_init(void)
+{
+	struct clk *clk = clk_get(NULL, "master_clk");
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(shx3_onchip_clocks); i++) {
+		struct clk *clkp = shx3_onchip_clocks[i];
+
+		clkp->parent = clk;
+		clk_register(clkp);
+		clk_enable(clkp);
+	}
+
+	/*
+	 * Now that we have the rest of the clocks registered, we need to
+	 * force the parent clock to propagate so that these clocks will
+	 * automatically figure out their rate. We cheat by handing the
+	 * parent clock its current rate and forcing child propagation.
+	 */
+	clk_set_rate(clk, clk_get_rate(clk));
+
+	clk_put(clk);
+
+	return 0;
+}
+arch_initcall(shx3_clk_init);
diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
new file mode 100644
index 00000000000..70683ea12b8
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
@@ -0,0 +1,85 @@
+/*
+ * SH-X3 Setup
+ *
+ *  Copyright (C) 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/io.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xffc30000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 40, 41, 43, 42 },
+	}, {
+		.mapbase	= 0xffc40000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 44, 45, 47, 46 },
+	}, {
+		.mapbase	= 0xffc50000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 48, 49, 51, 50 },
+	}, {
+		.mapbase	= 0xffc60000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 52, 53, 55, 54 },
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct platform_device *shx3_devices[] __initdata = {
+	&sci_device,
+};
+
+static int __init shx3_devices_setup(void)
+{
+	return platform_add_devices(shx3_devices,
+				    ARRAY_SIZE(shx3_devices));
+}
+__initcall(shx3_devices_setup);
+
+static struct intc2_data intc2_irq_table[] = {
+	{ 16, 0, 0, 0, 1, 2 },		/* TMU0 */
+	{ 40, 4, 0, 0x20, 0, 3 },	/* SCIF0 ERI */
+	{ 41, 4, 0, 0x20, 1, 3 },	/* SCIF0 RXI */
+	{ 42, 4, 0, 0x20, 2, 3 },	/* SCIF0 BRI */
+	{ 43, 4, 0, 0x20, 3, 3 },	/* SCIF0 TXI */
+};
+
+static struct intc2_desc intc2_irq_desc __read_mostly = {
+	.prio_base	= 0xfe410000,
+	.msk_base	= 0xfe410820,
+	.mskclr_base	= 0xfe410850,
+
+	.intc2_data	= intc2_irq_table,
+	.nr_irqs	= ARRAY_SIZE(intc2_irq_table),
+
+	.chip = {
+		.name	= "INTC2-SHX3",
+	},
+};
+
+void __init init_IRQ_intc2(void)
+{
+	register_intc2_controller(&intc2_irq_desc);
+}
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 765f83c1bca..de8e6e2f2c8 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -285,7 +285,7 @@ static const char *cpu_name[] = {
 	[CPU_SH7770]	= "SH7770",	[CPU_SH7780]	= "SH7780",
 	[CPU_SH7781]	= "SH7781",	[CPU_SH7343]	= "SH7343",
 	[CPU_SH7785]	= "SH7785",	[CPU_SH7722]	= "SH7722",
-	[CPU_SH_NONE]	= "Unknown"
+	[CPU_SHX3]	= "SH-X3",	[CPU_SH_NONE]	= "Unknown"
 };
 
 const char *get_cpu_subtype(struct sh_cpuinfo *c)
diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c
index 2d997e2a5b6..097ebd49f1b 100644
--- a/arch/sh/kernel/timers/timer-tmu.c
+++ b/arch/sh/kernel/timers/timer-tmu.c
@@ -30,7 +30,7 @@
 
 static int tmu_timer_start(void)
 {
-	ctrl_outb(ctrl_inb(TMU_TSTR) | 0x3, TMU_TSTR);
+	ctrl_outb(ctrl_inb(TMU_012_TSTR) | 0x3, TMU_012_TSTR);
 	return 0;
 }
 
@@ -52,7 +52,7 @@ static void tmu0_timer_set_interval(unsigned long interval, unsigned int reload)
 
 static int tmu_timer_stop(void)
 {
-	ctrl_outb(ctrl_inb(TMU_TSTR) & ~0x3, TMU_TSTR);
+	ctrl_outb(ctrl_inb(TMU_012_TSTR) & ~0x3, TMU_012_TSTR);
 	return 0;
 }
 
@@ -174,7 +174,8 @@ static int tmu_timer_init(void)
 
 #if !defined(CONFIG_CPU_SUBTYPE_SH7300) && \
     !defined(CONFIG_CPU_SUBTYPE_SH7760) && \
-    !defined(CONFIG_CPU_SUBTYPE_SH7785)
+    !defined(CONFIG_CPU_SUBTYPE_SH7785) && \
+    !defined(CONFIG_CPU_SUBTYPE_SHX3)
 	ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
 #endif
 
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 6fc5550c4ba..ea1d2716fdb 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -36,6 +36,9 @@ config CPU_SUBTYPE_ST40
 config CPU_SHX2
 	bool
 
+config CPU_SHX3
+	bool
+
 choice
 	prompt "Processor sub-type selection"
 
@@ -193,6 +196,12 @@ config CPU_SUBTYPE_SH7785
 	select CPU_SHX2
 	select CPU_HAS_INTC2_IRQ
 
+config CPU_SUBTYPE_SHX3
+	bool "Support SH-X3 processor"
+	select CPU_SH4A
+	select CPU_SHX3
+	select CPU_HAS_INTC2_IRQ
+
 # SH4AL-DSP Processor Support
 
 config CPU_SUBTYPE_SH73180
-- 
cgit v1.2.3


From 880dec100761f4fbc5fa5d22e658a8718828f04e Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 6 Jul 2007 10:22:59 +0900
Subject: sh: Add cpu and mach links to CLEAN_FILES.

These weren't being cleaned up, so add them to the CLEAN_FILES.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Makefile | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch/sh')

diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 6e1e17467a4..211d9e01807 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -200,7 +200,9 @@ compressed: zImage
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
-CLEAN_FILES += include/asm-sh/machtypes.h
+CLEAN_FILES += include/asm-sh/machtypes.h \
+	       include/asm-sh/cpu include/asm-sh/.cpu \
+	       include/asm-sh/mach include/asm-sh/.mach
 
 define archhelp
 	@echo '* zImage 	           - Compressed kernel image'
-- 
cgit v1.2.3


From 04c7d9579f25ff0dd01efa958805f34c92bc6a71 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 6 Jul 2007 10:58:04 +0900
Subject: sh: Correct __xdiv64_32/div64_32 return value size.

These should be returning a uint32_t, whereas they were erroneously
returning a u64 before. As the register sizes are 32-bits, this doesn't
really make a lot of sense.

Reported-by: Katsuya MATSUBARA <matsu@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/lib/div64-generic.c | 9 ++++-----
 arch/sh/lib/div64.S         | 6 +++---
 2 files changed, 7 insertions(+), 8 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/lib/div64-generic.c b/arch/sh/lib/div64-generic.c
index c02473afd58..d9482cd2a9e 100644
--- a/arch/sh/lib/div64-generic.c
+++ b/arch/sh/lib/div64-generic.c
@@ -4,16 +4,15 @@
 
 #include <linux/types.h>
 
-extern u64 __xdiv64_32(u64 n, u32 d);
+extern uint32_t __xdiv64_32(u64 n, u32 d);
 
-u64 __div64_32(u64 *xp, u32 y)
+uint32_t __div64_32(u64 *xp, u32 y)
 {
-	u64 rem;
-	u64 q = __xdiv64_32(*xp, y);
+	uint32_t rem;
+	uint32_t q = __xdiv64_32(*xp, y);
 
 	rem = *xp - q * y;
 	*xp = q;
 
 	return rem;
 }
-
diff --git a/arch/sh/lib/div64.S b/arch/sh/lib/div64.S
index eefc275d64a..5ee7334ea64 100644
--- a/arch/sh/lib/div64.S
+++ b/arch/sh/lib/div64.S
@@ -1,12 +1,12 @@
 /*	
- * unsigned long long __xdiv64_32(unsigned long long n, unsigned long d); 
+ * unsigned long __xdiv64_32(unsigned long long n, unsigned long d); 
  */
 
 #include <linux/linkage.h>
 
 .text
 ENTRY(__xdiv64_32)
-#ifdef  __LITTLE_ENDIAN__
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
 	mov	r4, r0
 	mov	r5, r1
 #else
@@ -34,7 +34,7 @@ ENTRY(__xdiv64_32)
 	rotcl	r0
 	div1	r6, r1
 	.endr
-#ifdef  __LITTLE_ENDIAN__
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
 	mov	r2, r1
 	rts
 	 rotcl	r0
-- 
cgit v1.2.3


From 989e5ab3e8159f563b3fda5317febee5af040983 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 7 Jul 2007 03:36:06 +0900
Subject: sh: Select IPR-IRQ for SH7091.

Fixes a compile failure for the Dreamcast.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/sh')

diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index ea1d2716fdb..28d79a474cd 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -127,6 +127,7 @@ config CPU_SUBTYPE_SH7750
 config CPU_SUBTYPE_SH7091
 	bool "Support SH7091 processor"
 	select CPU_SH4
+	select CPU_HAS_IPR_IRQ
 	help
 	  Select SH7091 if you have an SH-4 based Sega device (such as
 	  the Dreamcast, Naomi, and Naomi 2).
-- 
cgit v1.2.3


From ac6b9f28d8202ed064c9b372350693f79882b448 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 7 Jul 2007 04:09:02 +0900
Subject: sh: Update dreamcast defconfig.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/configs/dreamcast_defconfig | 338 ++++++++++++++++--------------------
 1 file changed, 148 insertions(+), 190 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
index 8b6b5a779de..3fdd270eecf 100644
--- a/arch/sh/configs/dreamcast_defconfig
+++ b/arch/sh/configs/dreamcast_defconfig
@@ -1,15 +1,23 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 10:51:55 2006
+# Linux kernel version: 2.6.22-rc4
+# Sat Jul  7 03:47:45 2007
 #
 CONFIG_SUPERH=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -28,6 +36,7 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
@@ -35,8 +44,10 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -50,14 +61,19 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -93,44 +109,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-CONFIG_SH_DREAMCAST=y
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7300 is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
@@ -138,79 +119,93 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
-CONFIG_CPU_SUBTYPE_SH7750=y
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
 CONFIG_CPU_SUBTYPE_SH7091=y
-CONFIG_CPU_SUBTYPE_SH7750R=y
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
 # CONFIG_CPU_SUBTYPE_SH7750S is not set
 # CONFIG_CPU_SUBTYPE_SH7751 is not set
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
 # CONFIG_CPU_SUBTYPE_ST40STB1 is not set
 # CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH73180 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x01000000
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
 # CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
 # CONFIG_SH_DSP is not set
 CONFIG_SH_STORE_QUEUES=y
 CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
 
 #
-# Timer support
+# Board support
+#
+CONFIG_SH_DREAMCAST=y
+
+#
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=49876504
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
 
 #
 # CPU Frequency scaling
@@ -232,6 +227,7 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y
 #
 # DMA support
 #
+CONFIG_SH_DMA_API=y
 CONFIG_SH_DMA=y
 CONFIG_NR_ONCHIP_DMA_CHANNELS=4
 CONFIG_NR_DMA_CHANNELS_BOOL=y
@@ -240,17 +236,23 @@ CONFIG_NR_DMA_CHANNELS=9
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
 
 #
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
@@ -269,32 +271,22 @@ CONFIG_CMDLINE="console=ttySC1,115200 panic=3"
 # Bus options
 #
 CONFIG_PCI=y
-# CONFIG_SH_PCIDMA_NONCOHERENT is not set
+CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
 #
 # CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
 # CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
 #
 # Networking
 #
@@ -303,13 +295,13 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -327,30 +319,20 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -376,7 +358,16 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
 
 #
 # Device Drivers
@@ -394,10 +385,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # Connector - unified userspace <-> kernelspace linker
 #
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
 
 #
@@ -408,6 +395,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -421,13 +409,16 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
 #
-# ATA/ATAPI/MFM/RLL support
+# Misc devices
 #
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_BLINK is not set
 # CONFIG_IDE is not set
 
 #
@@ -436,10 +427,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
 
 #
@@ -455,6 +442,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # IEEE 1394 (FireWire) support
 #
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 
 #
@@ -470,15 +458,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
 
 #
@@ -521,47 +501,16 @@ CONFIG_8139TOO=y
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_SC92031 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -604,17 +553,19 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -660,10 +611,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # IPMI
 #
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -680,14 +627,8 @@ CONFIG_SH_WDT=y
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -695,11 +636,7 @@ CONFIG_HW_RANDOM=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 
 #
@@ -711,44 +648,51 @@ CONFIG_HW_RANDOM=y
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
 
 #
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
+# Multifunction device drivers
 #
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
 CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
@@ -763,13 +707,17 @@ CONFIG_FB_PVR2=y
 # CONFIG_FB_RADEON is not set
 # CONFIG_FB_ATY128 is not set
 # CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
 # CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -789,10 +737,6 @@ CONFIG_FONT_8x16=y
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
@@ -800,13 +744,18 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
 
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
 #
 # USB support
 #
@@ -823,10 +772,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
 
 #
@@ -874,10 +819,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -956,6 +903,11 @@ CONFIG_MSDOS_PARTITION=y
 #
 # CONFIG_NLS is not set
 
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
 #
 # Profiling support
 #
@@ -965,17 +917,18 @@ CONFIG_PROFILING=y
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
@@ -991,8 +944,13 @@ CONFIG_LOG_BUF_SHIFT=14
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From 5296307de63f1949d601b3515f8b1a0a859c5847 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 7 Jul 2007 07:25:56 +0900
Subject: sh: Drop -Wa,-dsp for DSP tuning.

We already hand off the proper ISA variant with the dsp specifier
appended, so we don't need to explicitly set -dsp. This causes some
confusion with certain toolchains that are restricted to -dsp family
opcodes artificially.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Makefile | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 211d9e01807..c7a8e1f0c6b 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -48,8 +48,6 @@ cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -ml
 
 cflags-y	+= $(call as-option,-Wa$(comma)-isa=$(isa-y),) -ffreestanding
 
-cflags-$(CONFIG_SH_DSP)			+= -Wa,-dsp
-
 cflags-$(CONFIG_MORE_COMPILE_OPTIONS)	+= \
 	$(shell echo $(CONFIG_COMPILE_OPTIONS) | sed -e 's/"//g')
 
-- 
cgit v1.2.3


From aab1b16a61d653173b1c5f158c51ec08dd6605b0 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 12 Jul 2007 09:48:54 +0900
Subject: sh: Don't let SH-4A clobber SH-4 CFLAGS.

Older compilers don't support the -m4a{,nofpu} flags, which has the
side-effect of allowing FP operations to be emitted. Switch this to
incremental tuning, so we at least have -m4-nofpu as a fallback for
the gcc3 toolchains.

Without this, certain modules emit references to __udivsi3_i4 and
__sdivsi3_i4.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index c7a8e1f0c6b..77fecc62a05 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -35,12 +35,12 @@ endif
 endif
 
 cflags-$(CONFIG_CPU_SH2)		:= $(call cc-option,-m2,)
-cflags-$(CONFIG_CPU_SH2A)		:= $(call cc-option,-m2a,) \
+cflags-$(CONFIG_CPU_SH2A)		+= $(call cc-option,-m2a,) \
 					   $(call cc-option,-m2a-nofpu,)
 cflags-$(CONFIG_CPU_SH3)		:= $(call cc-option,-m3,)
 cflags-$(CONFIG_CPU_SH4)		:= $(call cc-option,-m4,) \
 	$(call cc-option,-mno-implicit-fp,-m4-nofpu)
-cflags-$(CONFIG_CPU_SH4A)		:= $(call cc-option,-m4a,) \
+cflags-$(CONFIG_CPU_SH4A)		+= $(call cc-option,-m4a,) \
 					   $(call cc-option,-m4a-nofpu,)
 
 cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= -mb
-- 
cgit v1.2.3


From e181127a7a12c5d8e29afa19d235b53bf4140cb3 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 12 Jul 2007 10:40:36 +0900
Subject: sh: Add a .bss.page_aligned section for 4K stacks.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/vmlinux.lds.S | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index 992c25ad377..0696402f446 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -103,14 +103,14 @@ SECTIONS
   __machvec_end = .;
 
   . = ALIGN(PAGE_SIZE);
-  __init_end = .;
-
-  . = ALIGN(4);
-  __bss_start = .;		/* BSS */
-  .bss : { *(.bss) }
-
-  . = ALIGN(4);
-  _end = . ;
+  .bss : {
+	__init_end = .;
+	__bss_start = .;		/* BSS */
+  	*(.bss.page_aligned)
+  	*(.bss)
+	. = ALIGN(4);
+	_end = . ;
+  }
 
   /* When something in the kernel is NOT compiled as a module, the
    * module cleanup code and data are put into these segments.  Both
-- 
cgit v1.2.3


From bdf4fa536ba5c6eff125f18231d54e227b1f3629 Mon Sep 17 00:00:00 2001
From: "Robert P. J. Day" <rpjday@mindspring.com>
Date: Thu, 12 Jul 2007 10:41:52 +0900
Subject: sh: Update the alignment when 4K stacks are used.

Use the newly added .bss.page_aligned section for aligning the stacks
rather than THREAD_SIZE.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/irq.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 27b923c45b3..27897798867 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -158,15 +158,11 @@ asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs)
 }
 
 #ifdef CONFIG_4KSTACKS
-/*
- * These should really be __section__(".bss.page_aligned") as well, but
- * gcc's 3.0 and earlier don't handle that correctly.
- */
 static char softirq_stack[NR_CPUS * THREAD_SIZE]
-		__attribute__((__aligned__(THREAD_SIZE)));
+		__attribute__((__section__(".bss.page_aligned")));
 
 static char hardirq_stack[NR_CPUS * THREAD_SIZE]
-		__attribute__((__aligned__(THREAD_SIZE)));
+		__attribute__((__section__(".bss.page_aligned")));
 
 /*
  * allocate per-cpu stacks for hardirq and for softirq processing
-- 
cgit v1.2.3


From 0caf3ead5131215cbd462d31f7658798030f793d Mon Sep 17 00:00:00 2001
From: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Date: Thu, 12 Jul 2007 10:47:08 +0900
Subject: sh: Kill off dead mach.c for hp6xx.

Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/hp6xx/mach.c | 44 --------------------------------------------
 1 file changed, 44 deletions(-)
 delete mode 100644 arch/sh/boards/hp6xx/mach.c

(limited to 'arch/sh')

diff --git a/arch/sh/boards/hp6xx/mach.c b/arch/sh/boards/hp6xx/mach.c
deleted file mode 100644
index 35b89596047..00000000000
--- a/arch/sh/boards/hp6xx/mach.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * linux/arch/sh/boards/hp6xx/mach.c
- *
- * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Machine vector for the HP680
- */
-#include <asm/machvec.h>
-#include <asm/hd64461.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-static struct sh_machine_vector mv_hp6xx __initmv = {
-	.mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM,
-
-	.mv_inb = hd64461_inb,
-	.mv_inw = hd64461_inw,
-	.mv_inl = hd64461_inl,
-	.mv_outb = hd64461_outb,
-	.mv_outw = hd64461_outw,
-	.mv_outl = hd64461_outl,
-
-	.mv_inb_p = hd64461_inb_p,
-	.mv_inw_p = hd64461_inw,
-	.mv_inl_p = hd64461_inl,
-	.mv_outb_p = hd64461_outb_p,
-	.mv_outw_p = hd64461_outw,
-	.mv_outl_p = hd64461_outl,
-
-	.mv_insb = hd64461_insb,
-	.mv_insw = hd64461_insw,
-	.mv_insl = hd64461_insl,
-	.mv_outsb = hd64461_outsb,
-	.mv_outsw = hd64461_outsw,
-	.mv_outsl = hd64461_outsl,
-
-	.mv_readw = hd64461_readw,
-	.mv_writew = hd64461_writew,
-
-	.mv_irq_demux = hd64461_irq_demux,
-};
-- 
cgit v1.2.3


From 8cb661d6a4b69734c393beeb523cbf86c915f374 Mon Sep 17 00:00:00 2001
From: Erik Johansson <erik.johansson@motorola.com>
Date: Thu, 12 Jul 2007 16:37:00 +0900
Subject: sh: fix race in parallel out-of-tree build

Depending on which of the three dependencies for archprepare (in
arch/sh/Makefile) get built first, the directory include/asm-sh may or
may not exist when the maketools target is built. If the directory does
not exist, awk will fail to generate machtypes.h. This patch fixes this
by creating the directory before awk is executed.

Signed-off-by: Erik Johansson <erik.johansson@motorola.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/tools/Makefile | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/sh')

diff --git a/arch/sh/tools/Makefile b/arch/sh/tools/Makefile
index 3c370a11329..567516b58ac 100644
--- a/arch/sh/tools/Makefile
+++ b/arch/sh/tools/Makefile
@@ -12,4 +12,5 @@
 
 include/asm-sh/machtypes.h: $(src)/gen-mach-types $(src)/mach-types
 	@echo '  Generating $@'
+	$(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
 	$(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
-- 
cgit v1.2.3


From 2414b86d21dbacc53826d375c6001d31d8ebbee2 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 13 Jul 2007 09:30:31 +0900
Subject: sh: Export div symbols for GCC 4.2 and ST GCC.

GCC 4.2 can emit integer variants of the FP division routines, so
these need to be exported in order to keep the modules happy.

4.1.x versions of the ST compiler have these things backported,
and so also generate these symbols (whereas vanilla gcc 4.1.x
does not), so handle the __GNUC_STM_RELEASE__ case to accomodate
updated versions of the 4.1.x toolchain.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/sh_ksyms.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c
index c1cfcb9f047..c968dcf09ee 100644
--- a/arch/sh/kernel/sh_ksyms.c
+++ b/arch/sh/kernel/sh_ksyms.c
@@ -78,6 +78,16 @@ DECLARE_EXPORT(__movstr);
 DECLARE_EXPORT(__movmem_i4_even);
 DECLARE_EXPORT(__movmem_i4_odd);
 DECLARE_EXPORT(__movmemSI12_i4);
+
+#if (__GNUC_MINOR__ == 2 || defined(__GNUC_STM_RELEASE__))
+/*
+ * GCC 4.2 emits these for division, as do GCC 4.1.x versions of the ST
+ * compiler which include backported patches.
+ */
+DECLARE_EXPORT(__sdivsi3_i4i);
+DECLARE_EXPORT(__udiv_qrnnd_16);
+DECLARE_EXPORT(__udivsi3_i4i);
+#endif
 #else /* GCC 3.x */
 DECLARE_EXPORT(__movstr_i4_even);
 DECLARE_EXPORT(__movstr_i4_odd);
-- 
cgit v1.2.3


From 2f5a5dc0c1a9e970ceb9b47d778732962d6dd9f6 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 13 Jul 2007 09:30:57 +0900
Subject: sh: Update r7785rp defconfig.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/configs/r7785rp_defconfig | 296 +++++++++++++-------------------------
 1 file changed, 100 insertions(+), 196 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index 0f5ec649daf..5c29338532d 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc3
-# Mon Mar 12 14:26:33 2007
+# Linux kernel version: 2.6.22-rc4
+# Thu Jul 12 12:33:15 2007
 #
 CONFIG_SUPERH=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
@@ -11,7 +11,9 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
@@ -43,6 +45,7 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_SYSFS_DEPRECATED is not set
 # CONFIG_RELAY is not set
 # CONFIG_BLK_DEV_INITRD is not set
@@ -60,13 +63,18 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
+CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -102,55 +110,11 @@ CONFIG_DEFAULT_IOSCHED="noop"
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-CONFIG_SH_HIGHLANDER=y
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_UNKNOWN is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_R7780MP is not set
-CONFIG_SH_R7785RP=y
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SHX2=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
 # CONFIG_CPU_SUBTYPE_SH7300 is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
@@ -158,10 +122,7 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -170,23 +131,12 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
 # CONFIG_CPU_SUBTYPE_ST40STB1 is not set
 # CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 CONFIG_CPU_SUBTYPE_SH7785=y
-
-#
-# SH4AL-DSP Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH73180 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
@@ -194,6 +144,7 @@ CONFIG_CPU_SUBTYPE_SH7785=y
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x08000000
@@ -201,6 +152,12 @@ CONFIG_MEMORY_SIZE=0x08000000
 CONFIG_32BIT=y
 # CONFIG_X2TLB is not set
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
@@ -215,17 +172,17 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
 # CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
 
 #
 # Processor features
@@ -240,13 +197,23 @@ CONFIG_CPU_HAS_INTC2_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_PTEA=y
 
+#
+# Board support
+#
+CONFIG_SH_HIGHLANDER=y
+# CONFIG_SH_R7780RP is not set
+# CONFIG_SH_R7780MP is not set
+CONFIG_SH_R7785RP=y
+
 #
 # Timer and clock configuration
 #
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=28
-CONFIG_NO_IDLE_HZ=y
 CONFIG_SH_PCLK_FREQ=50000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
 
 #
 # CPU Frequency scaling
@@ -261,7 +228,6 @@ CONFIG_SH_PCLK_FREQ=50000000
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
 
 #
 # Additional SuperH Device Drivers
@@ -278,7 +244,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_KEXEC=y
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
@@ -300,30 +266,21 @@ CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
 #
 # CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
 # CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
 #
 # Networking
 #
@@ -332,7 +289,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -377,20 +333,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 CONFIG_BRIDGE=m
@@ -417,8 +361,16 @@ CONFIG_LLC=m
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
 
 #
 # Device Drivers
@@ -438,10 +390,6 @@ CONFIG_FW_LOADER=m
 # Connector - unified userspace <-> kernelspace linker
 #
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
 
 #
@@ -475,12 +423,10 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # Misc devices
 #
+# CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLINK is not set
 # CONFIG_IDE is not set
 
 #
@@ -509,6 +455,7 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -554,10 +501,6 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_AHCI is not set
@@ -580,6 +523,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
 # CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
 # CONFIG_PATA_CS5520 is not set
 # CONFIG_PATA_CS5530 is not set
@@ -629,6 +573,7 @@ CONFIG_PATA_PLATFORM=y
 #
 # IEEE 1394 (FireWire) support
 #
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 
 #
@@ -644,15 +589,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
 
 #
@@ -673,10 +610,7 @@ CONFIG_MII=y
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
@@ -689,55 +623,26 @@ CONFIG_R8169=y
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_MLX4_CORE is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -789,6 +694,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -831,14 +737,8 @@ CONFIG_LEGACY_PTY_COUNT=256
 # IPMI
 #
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 # CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_DRM is not set
@@ -848,10 +748,7 @@ CONFIG_HW_RANDOM=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 
 #
@@ -864,16 +761,15 @@ CONFIG_HW_RANDOM=y
 # Dallas's 1-wire bus
 #
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
@@ -885,22 +781,30 @@ CONFIG_HWMON=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -908,7 +812,7 @@ CONFIG_FB=y
 # CONFIG_FB_TILEBLITTING is not set
 
 #
-# Frambuffer hardware drivers
+# Frame buffer hardware drivers
 #
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
@@ -930,12 +834,11 @@ CONFIG_FB=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
 # CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
 # CONFIG_FB_VIRTUAL is not set
-
-#
-# Logo configuration
-#
 # CONFIG_LOGO is not set
 
 #
@@ -952,13 +855,10 @@ CONFIG_SOUND=m
 # Open Sound System
 #
 CONFIG_SOUND_PRIME=m
-# CONFIG_OBSOLETE_OSS is not set
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_ICH is not set
+# CONFIG_OSS_OBSOLETE is not set
 # CONFIG_SOUND_TRIDENT is not set
 # CONFIG_SOUND_MSNDCLAS is not set
 # CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
 
 #
 # HID Devices
@@ -982,10 +882,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
 
 #
@@ -1026,17 +922,29 @@ CONFIG_RTC_INTF_SYSFS=y
 CONFIG_RTC_INTF_PROC=y
 CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
 
 #
-# RTC drivers
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
 #
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SH=y
-# CONFIG_RTC_DRV_TEST is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+
 #
 # DMA Engine support
 #
@@ -1050,14 +958,6 @@ CONFIG_RTC_DRV_SH=y
 # DMA Devices
 #
 
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
 #
 # File systems
 #
@@ -1157,6 +1057,7 @@ CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1239,7 +1140,6 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DETECT_SOFTLOCKUP is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1266,6 +1166,7 @@ CONFIG_FORCED_INLINING=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_BOOTMEM is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_4KSTACKS is not set
@@ -1300,6 +1201,7 @@ CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
@@ -1328,7 +1230,9 @@ CONFIG_CRYPTO_DES=y
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From 075fc19bdea9120989142fa2179abd958b3a5c72 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 13 Jul 2007 12:27:13 +0900
Subject: sh: Revert __xdiv64_32 size change.

It's only __div64_32 that needs the fix, __xdiv64_32 behaves as
expected with the original size.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/lib/div64-generic.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/lib/div64-generic.c b/arch/sh/lib/div64-generic.c
index d9482cd2a9e..4bef3b5d964 100644
--- a/arch/sh/lib/div64-generic.c
+++ b/arch/sh/lib/div64-generic.c
@@ -4,12 +4,12 @@
 
 #include <linux/types.h>
 
-extern uint32_t __xdiv64_32(u64 n, u32 d);
+extern uint64_t __xdiv64_32(u64 n, u32 d);
 
 uint32_t __div64_32(u64 *xp, u32 y)
 {
 	uint32_t rem;
-	uint32_t q = __xdiv64_32(*xp, y);
+	uint64_t q = __xdiv64_32(*xp, y);
 
 	rem = *xp - q * y;
 	*xp = q;
-- 
cgit v1.2.3


From e509ac4bbc661052dc73a2e8138800ba77d4ecb9 Mon Sep 17 00:00:00 2001
From: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Date: Mon, 16 Jul 2007 09:51:39 +0900
Subject: sh: sh-rtc support for SH7709.

Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh3/setup-sh7709.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7709.c b/arch/sh/kernel/cpu/sh3/setup-sh7709.c
index c0265a96e7d..d79ec0c0522 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7709.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7709.c
@@ -12,6 +12,26 @@
 #include <linux/serial.h>
 #include <asm/sci.h>
 
+static struct resource rtc_resources[] = {
+	[0] =	{
+		.start	= 0xfffffec0,
+		.end	= 0xfffffec0 + 0x1e,
+		.flags  = IORESOURCE_IO,
+	},
+	[1] =	{
+		.start  = 20,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] =	{
+		.start	= 21,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] =	{
+		.start	= 22,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase	= 0xfffffe80,
@@ -41,8 +61,16 @@ static struct platform_device sci_device = {
 	},
 };
 
+static struct platform_device rtc_device = {
+	.name		= "sh-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+};
+
 static struct platform_device *sh7709_devices[] __initdata = {
 	&sci_device,
+	&rtc_device,
 };
 
 static int __init sh7709_devices_setup(void)
-- 
cgit v1.2.3