From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- arch/mips/sni/setup.c | 203 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 203 insertions(+) create mode 100644 arch/mips/sni/setup.c (limited to 'arch/mips/sni/setup.c') diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c new file mode 100644 index 00000000000..8f67cee4317 --- /dev/null +++ b/arch/mips/sni/setup.c @@ -0,0 +1,203 @@ +/* + * Setup pointers to hardware-dependent routines. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 97, 98, 2000, 03, 04 Ralf Baechle (ralf@linux-mips.org) + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +extern void sni_machine_restart(char *command); +extern void sni_machine_halt(void); +extern void sni_machine_power_off(void); + +static void __init sni_rm200_pci_timer_setup(struct irqaction *irq) +{ + /* set the clock to 100 Hz */ + outb_p(0x34,0x43); /* binary, mode 2, LSB/MSB, ch 0 */ + outb_p(LATCH & 0xff , 0x40); /* LSB */ + outb(LATCH >> 8 , 0x40); /* MSB */ + setup_irq(0, irq); +} + +/* + * A bit more gossip about the iron we're running on ... + */ +static inline void sni_pcimt_detect(void) +{ + char boardtype[80]; + unsigned char csmsr; + char *p = boardtype; + unsigned int asic; + + csmsr = *(volatile unsigned char *)PCIMT_CSMSR; + + p += sprintf(p, "%s PCI", (csmsr & 0x80) ? "RM200" : "RM300"); + if ((csmsr & 0x80) == 0) + p += sprintf(p, ", board revision %s", + (csmsr & 0x20) ? "D" : "C"); + asic = csmsr & 0x80; + asic = (csmsr & 0x08) ? asic : !asic; + p += sprintf(p, ", ASIC PCI Rev %s", asic ? "1.0" : "1.1"); + printk("%s.\n", boardtype); +} + +static void __init sni_display_setup(void) +{ +#ifdef CONFIG_VT +#if defined(CONFIG_VGA_CONSOLE) + struct screen_info *si = &screen_info; + DISPLAY_STATUS *di; + + di = ArcGetDisplayStatus(1); + + if (di) { + si->orig_x = di->CursorXPosition; + si->orig_y = di->CursorYPosition; + si->orig_video_cols = di->CursorMaxXPosition; + si->orig_video_lines = di->CursorMaxYPosition; + si->orig_video_isVGA = VIDEO_TYPE_VGAC; + si->orig_video_points = 16; + } +#endif +#endif +} + +static struct resource sni_io_resource = { + "PCIMT IO MEM", 0x00001000UL, 0x03bfffffUL, IORESOURCE_IO, +}; + +static struct resource pcimt_io_resources[] = { + { "dma1", 0x00, 0x1f, IORESOURCE_BUSY }, + { "timer", 0x40, 0x5f, IORESOURCE_BUSY }, + { "keyboard", 0x60, 0x6f, IORESOURCE_BUSY }, + { "dma page reg", 0x80, 0x8f, IORESOURCE_BUSY }, + { "dma2", 0xc0, 0xdf, IORESOURCE_BUSY }, + { "PCI config data", 0xcfc, 0xcff, IORESOURCE_BUSY } +}; + +static struct resource sni_mem_resource = { + "PCIMT PCI MEM", 0x10000000UL, 0xffffffffUL, IORESOURCE_MEM +}; + +/* + * The RM200/RM300 has a few holes in it's PCI/EISA memory address space used + * for other purposes. Be paranoid and allocate all of the before the PCI + * code gets a chance to to map anything else there ... + * + * This leaves the following areas available: + * + * 0x10000000 - 0x1009ffff (640kB) PCI/EISA/ISA Bus Memory + * 0x10100000 - 0x13ffffff ( 15MB) PCI/EISA/ISA Bus Memory + * 0x18000000 - 0x1fbfffff (124MB) PCI/EISA Bus Memory + * 0x1ff08000 - 0x1ffeffff (816kB) PCI/EISA Bus Memory + * 0xa0000000 - 0xffffffff (1.5GB) PCI/EISA Bus Memory + */ +static struct resource pcimt_mem_resources[] = { + { "Video RAM area", 0x100a0000, 0x100bffff, IORESOURCE_BUSY }, + { "ISA Reserved", 0x100c0000, 0x100fffff, IORESOURCE_BUSY }, + { "PCI IO", 0x14000000, 0x17bfffff, IORESOURCE_BUSY }, + { "Cache Replacement Area", 0x17c00000, 0x17ffffff, IORESOURCE_BUSY}, + { "PCI INT Acknowledge", 0x1a000000, 0x1a000003, IORESOURCE_BUSY }, + { "Boot PROM", 0x1fc00000, 0x1fc7ffff, IORESOURCE_BUSY}, + { "Diag PROM", 0x1fc80000, 0x1fcfffff, IORESOURCE_BUSY}, + { "X-Bus", 0x1fd00000, 0x1fdfffff, IORESOURCE_BUSY}, + { "BIOS map", 0x1fe00000, 0x1fefffff, IORESOURCE_BUSY}, + { "NVRAM / EEPROM", 0x1ff00000, 0x1ff7ffff, IORESOURCE_BUSY}, + { "ASIC PCI", 0x1fff0000, 0x1fffefff, IORESOURCE_BUSY}, + { "MP Agent", 0x1ffff000, 0x1fffffff, IORESOURCE_BUSY}, + { "Main Memory", 0x20000000, 0x9fffffff, IORESOURCE_BUSY} +}; + +static void __init sni_resource_init(void) +{ + int i; + + /* request I/O space for devices used on all i[345]86 PCs */ + for (i = 0; i < ARRAY_SIZE(pcimt_io_resources); i++) + request_resource(&ioport_resource, pcimt_io_resources + i); + + /* request mem space for pcimt-specific devices */ + for (i = 0; i < ARRAY_SIZE(pcimt_mem_resources); i++) + request_resource(&sni_mem_resource, pcimt_mem_resources + i); + + ioport_resource.end = sni_io_resource.end; +} + +extern struct pci_ops sni_pci_ops; + +static struct pci_controller sni_controller = { + .pci_ops = &sni_pci_ops, + .mem_resource = &sni_mem_resource, + .mem_offset = 0x10000000UL, + .io_resource = &sni_io_resource, + .io_offset = 0x00000000UL +}; + +static inline void sni_pcimt_time_init(void) +{ + rtc_get_time = mc146818_get_cmos_time; + rtc_set_time = mc146818_set_rtc_mmss; +} + +static int __init sni_rm200_pci_setup(void) +{ + sni_pcimt_detect(); + sni_pcimt_sc_init(); + sni_pcimt_time_init(); + + set_io_port_base(SNI_PORT_BASE); + ioport_resource.end = sni_io_resource.end; + + /* + * Setup (E)ISA I/O memory access stuff + */ + isa_slot_offset = 0xb0000000; +#ifdef CONFIG_EISA + EISA_bus = 1; +#endif + + sni_resource_init(); + board_timer_setup = sni_rm200_pci_timer_setup; + + _machine_restart = sni_machine_restart; + _machine_halt = sni_machine_halt; + _machine_power_off = sni_machine_power_off; + + sni_display_setup(); + +#ifdef CONFIG_PCI + register_pci_controller(&sni_controller); +#endif + + return 0; +} + +early_initcall(sni_rm200_pci_setup); -- cgit v1.2.3