From 8cc11f5ab5384dad6c63905f71882e65cd70b7b7 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sun, 6 Sep 2009 23:10:10 -0400 Subject: microblaze: Cleanup linker script using new linker script macros. I wasn't able to further clean up the linker script using the INIT_DATA_SECTION macro because of the FIXME comment for the .init.ramfs section; when that is resolved we should convert microblaze to use INIT_DATA_SECTION. Signed-off-by: Tim Abbott Cc: Michal Simek Cc: microblaze-uclinux@itee.uq.edu.au Cc: Sam Ravnborg Signed-off-by: Michal Simek --- arch/microblaze/kernel/vmlinux.lds.S | 39 ++++++++---------------------------- 1 file changed, 8 insertions(+), 31 deletions(-) (limited to 'arch/microblaze') diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S index ec5fa91a48d..b76c17c9ae4 100644 --- a/arch/microblaze/kernel/vmlinux.lds.S +++ b/arch/microblaze/kernel/vmlinux.lds.S @@ -13,6 +13,8 @@ OUTPUT_ARCH(microblaze) ENTRY(_start) #include +#include +#include jiffies = jiffies_64 + 4; @@ -39,12 +41,7 @@ SECTIONS { . = ALIGN(16); RODATA - . = ALIGN(16); - __ex_table : { - __start___ex_table = .; - *(__ex_table) - __stop___ex_table = .; - } + EXCEPTION_TABLE(16) /* * sdata2 section can go anywhere, but must be word aligned @@ -61,12 +58,7 @@ SECTIONS { } _sdata = . ; - .data ALIGN (4096) : { /* page aligned when MMU used - origin 0x4 */ - DATA_DATA - CONSTRUCTORS - } - . = ALIGN(32); - .data.cacheline_aligned : { *(.data.cacheline_aligned) } + RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE) _edata = . ; /* Reserve some low RAM for r0 based memory references */ @@ -74,10 +66,6 @@ SECTIONS { r0_ram = . ; . = . + 4096; /* a page should be enough */ - /* The initial task */ - . = ALIGN(8192); - .data.init_task : { *(.data.init_task) } - /* Under the microblaze ABI, .sdata and .sbss must be contiguous */ . = ALIGN(8); .sdata : { @@ -96,12 +84,7 @@ SECTIONS { __init_begin = .; - . = ALIGN(4096); - .init.text : { - _sinittext = . ; - INIT_TEXT - _einittext = .; - } + INIT_TEXT_SECTION(PAGE_SIZE) .init.data : { INIT_DATA @@ -115,21 +98,15 @@ SECTIONS { } .init.setup : { - __setup_start = .; - *(.init.setup) - __setup_end = .; + INIT_SETUP(0) } .initcall.init : { - __initcall_start = .; - INITCALLS - __initcall_end = .; + INIT_CALLS } .con_initcall.init : { - __con_initcall_start = .; - *(.con_initcall.init) - __con_initcall_end = .; + CON_INITCALL } SECURITY_INIT -- cgit v1.2.3 From 2622434ee0108c65808a63f067e72d0bbc75b372 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 30 Jul 2009 14:31:23 +0200 Subject: microblaze: Add checking mechanism for MSR instruction It was necessary to use fourth parameter(r8) in early_printk to show messages on console. Signed-off-by: Michal Simek --- arch/microblaze/include/asm/setup.h | 2 +- arch/microblaze/kernel/head.S | 17 +++++++++++++++-- arch/microblaze/kernel/setup.c | 12 +++++++++++- 3 files changed, 27 insertions(+), 4 deletions(-) (limited to 'arch/microblaze') diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h index 27f8dafd8c3..ed67c9ed15b 100644 --- a/arch/microblaze/include/asm/setup.h +++ b/arch/microblaze/include/asm/setup.h @@ -38,7 +38,7 @@ extern void early_console_reg_tlb_alloc(unsigned int addr); void time_init(void); void init_IRQ(void); void machine_early_init(const char *cmdline, unsigned int ram, - unsigned int fdt); + unsigned int fdt, unsigned int msr); void machine_restart(char *cmd); void machine_shutdown(void); diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index e41c6ce2a7b..bfc7ea801cc 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -55,6 +55,19 @@ ENTRY(_start) andi r1, r1, ~2 mts rmsr, r1 +/* + * Here is checking mechanism which check if Microblaze has msr instructions + * We load msr and compare it with previous r1 value - if is the same, + * msr instructions works if not - cpu don't have them. + */ + or r8, r0, r0 /* 0 - I have msr instr, 1 - I don't have */ + or r12, r0, r0 + msrset r12, 0 /* set nothing - just read msr for test */ + cmpu r12, r12, r1 + beqi r12, 1f + ori r8, r0, 1 /* I don't have msr */ +1: + /* r7 may point to an FDT, or there may be one linked in. if it's in r7, we've got to save it away ASAP. We ensure r7 points to a valid FDT, just in case the bootloader @@ -209,8 +222,8 @@ start_here: * Please see $(ARCH)/mach-$(SUBARCH)/setup.c for * the function. */ - la r8, r0, machine_early_init - brald r15, r8 + la r9, r0, machine_early_init + brald r15, r9 nop #ifndef CONFIG_MMU diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index 2a97bf513b6..8c1e0f4dcf1 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -94,7 +94,7 @@ inline unsigned get_romfs_len(unsigned *addr) #endif /* CONFIG_MTD_UCLINUX_EBSS */ void __init machine_early_init(const char *cmdline, unsigned int ram, - unsigned int fdt) + unsigned int fdt, unsigned int msr) { unsigned long *src, *dst = (unsigned long *)0x0; @@ -157,6 +157,16 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, early_printk("New klimit: 0x%08x\n", (unsigned)klimit); #endif +#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR + if (msr) + early_printk("!!!Your kernel has setup MSR instruction but " + "CPU don't have it %d\n", msr); +#else + if (!msr) + early_printk("!!!Your kernel not setup MSR instruction but " + "CPU have it %d\n", msr); +#endif + for (src = __ivt_start; src < __ivt_end; src++, dst++) *dst = *src; -- cgit v1.2.3 From 9002062ff52696888847224a778a3279bc8c1cb5 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 31 Aug 2009 16:24:56 +0200 Subject: microblaze: Improve checking mechanism for MSR instruction It is more safe to use clear instead of msrset. We save some instructions too. Signed-off-by: Michal Simek --- arch/microblaze/kernel/head.S | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) (limited to 'arch/microblaze') diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index bfc7ea801cc..697ce3007f3 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -54,19 +54,16 @@ ENTRY(_start) mfs r1, rmsr andi r1, r1, ~2 mts rmsr, r1 - /* * Here is checking mechanism which check if Microblaze has msr instructions * We load msr and compare it with previous r1 value - if is the same, * msr instructions works if not - cpu don't have them. */ - or r8, r0, r0 /* 0 - I have msr instr, 1 - I don't have */ - or r12, r0, r0 - msrset r12, 0 /* set nothing - just read msr for test */ - cmpu r12, r12, r1 - beqi r12, 1f - ori r8, r0, 1 /* I don't have msr */ -1: + /* r8=0 - I have msr instr, 1 - I don't have them */ + rsubi r0, r0, 1 /* set the carry bit */ + msrclr r0, 0x4 /* try to clear it */ + /* read the carry bit, r8 will be '0' if msrclr exists */ + addik r8, r0, 0 /* r7 may point to an FDT, or there may be one linked in. if it's in r7, we've got to save it away ASAP. -- cgit v1.2.3 From d5b37092aae1edaa638b156b16d09854ad6a1ec0 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 24 Aug 2009 13:25:16 +0200 Subject: microblaze: Implement include/asm/syscall.h. Signed-off-by: Edgar E. Iglesias Signed-off-by: Michal Simek --- arch/microblaze/include/asm/syscall.h | 99 +++++++++++++++++++++++++++++++++++ 1 file changed, 99 insertions(+) create mode 100644 arch/microblaze/include/asm/syscall.h (limited to 'arch/microblaze') diff --git a/arch/microblaze/include/asm/syscall.h b/arch/microblaze/include/asm/syscall.h new file mode 100644 index 00000000000..048dfcd8d89 --- /dev/null +++ b/arch/microblaze/include/asm/syscall.h @@ -0,0 +1,99 @@ +#ifndef __ASM_MICROBLAZE_SYSCALL_H +#define __ASM_MICROBLAZE_SYSCALL_H + +#include +#include +#include + +/* The system call number is given by the user in R12 */ +static inline long syscall_get_nr(struct task_struct *task, + struct pt_regs *regs) +{ + return regs->r12; +} + +static inline void syscall_rollback(struct task_struct *task, + struct pt_regs *regs) +{ + /* TODO. */ +} + +static inline long syscall_get_error(struct task_struct *task, + struct pt_regs *regs) +{ + return IS_ERR_VALUE(regs->r3) ? regs->r3 : 0; +} + +static inline long syscall_get_return_value(struct task_struct *task, + struct pt_regs *regs) +{ + return regs->r3; +} + +static inline void syscall_set_return_value(struct task_struct *task, + struct pt_regs *regs, + int error, long val) +{ + if (error) + regs->r3 = -error; + else + regs->r3 = val; +} + +static inline microblaze_reg_t microblaze_get_syscall_arg(struct pt_regs *regs, + unsigned int n) +{ + switch (n) { + case 5: return regs->r10; + case 4: return regs->r9; + case 3: return regs->r8; + case 2: return regs->r7; + case 1: return regs->r6; + case 0: return regs->r5; + default: + BUG(); + } + return ~0; +} + +static inline void microblaze_set_syscall_arg(struct pt_regs *regs, + unsigned int n, + unsigned long val) +{ + switch (n) { + case 5: + regs->r10 = val; + case 4: + regs->r9 = val; + case 3: + regs->r8 = val; + case 2: + regs->r7 = val; + case 1: + regs->r6 = val; + case 0: + regs->r5 = val; + default: + BUG(); + } +} + +static inline void syscall_get_arguments(struct task_struct *task, + struct pt_regs *regs, + unsigned int i, unsigned int n, + unsigned long *args) +{ + while (n--) + *args++ = microblaze_get_syscall_arg(regs, i++); +} + +static inline void syscall_set_arguments(struct task_struct *task, + struct pt_regs *regs, + unsigned int i, unsigned int n, + const unsigned long *args) +{ + while (n--) + microblaze_set_syscall_arg(regs, i++, *args++); +} + +#endif /* __ASM_MICROBLAZE_SYSCALL_H */ -- cgit v1.2.3 From afc26cb39e1e74c87a1b5eb013ead2590b91489c Mon Sep 17 00:00:00 2001 From: Julie Zhu Date: Mon, 27 Jul 2009 11:45:32 -0600 Subject: microblaze: Add architectural support for USB EHCI host controllers Add architectural support for USB EHCI host controllers. It has been tested using the USB EHCI host controller from Xilinx Inc., using both High Speed devices and Full Speed devices. Signed-off-by: Julie Zhu Signed-off-by: Michal Simek --- arch/microblaze/Kconfig | 1 + arch/microblaze/include/asm/io.h | 3 +++ 2 files changed, 4 insertions(+) (limited to 'arch/microblaze') diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 2db722d80d4..bbd8327f189 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -6,6 +6,7 @@ mainmenu "Linux/Microblaze Kernel Configuration" config MICROBLAZE def_bool y select HAVE_LMB + select USB_ARCH_HAS_EHCI select ARCH_WANT_OPTIONAL_GPIOLIB config SWAP diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h index 7c3ec13b44d..fc9997b73c0 100644 --- a/arch/microblaze/include/asm/io.h +++ b/arch/microblaze/include/asm/io.h @@ -210,6 +210,9 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size, #define in_be32(a) __raw_readl((const void __iomem __force *)(a)) #define in_be16(a) __raw_readw(a) +#define writel_be(v, a) out_be32((__force unsigned *)a, v) +#define readl_be(a) in_be32((__force unsigned *)a) + /* * Little endian */ -- cgit v1.2.3 From ac854ff1fc779101ff1989c3a20c1f238a2b5f3a Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 17 Sep 2009 17:37:33 +0200 Subject: microblaze: Save and restore msr in hw exception I thought that this part of code could be removed because just save and restore MSR but any code can't change it. But seems to that any part of code works with this information. This patch solved problem with allocation. Signed-off-by: Michal Simek --- arch/microblaze/kernel/hw_exception_handler.S | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch/microblaze') diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S index 3288c973767..0ad0f7011a1 100644 --- a/arch/microblaze/kernel/hw_exception_handler.S +++ b/arch/microblaze/kernel/hw_exception_handler.S @@ -84,9 +84,10 @@ #define NUM_TO_REG(num) r ## num #ifdef CONFIG_MMU -/* FIXME you can't change first load of MSR because there is - * hardcoded jump bri 4 */ #define RESTORE_STATE \ + lwi r5, r1, 0; \ + mts rmsr, r5; \ + nop; \ lwi r3, r1, PT_R3; \ lwi r4, r1, PT_R4; \ lwi r5, r1, PT_R5; \ @@ -309,6 +310,9 @@ _hw_exception_handler: lwi r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)) /* get saved current */ #endif + mfs r5, rmsr; + nop + swi r5, r1, 0; mfs r3, resr nop mfs r4, rear; -- cgit v1.2.3 From e469b0eb36c8abf033435c4918b03eaab159e002 Mon Sep 17 00:00:00 2001 From: John Williams Date: Thu, 17 Sep 2009 21:21:23 +1000 Subject: microblaze: Use correct kbuild variable KBUILD_CFLAGS Fixes the bug introduced in 9552158573f847aa429334bb97995bb290bb4b0d Signed-off-by: John Williams --- arch/microblaze/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/microblaze') diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile index 8439598d465..737a4dc72ed 100644 --- a/arch/microblaze/Makefile +++ b/arch/microblaze/Makefile @@ -37,12 +37,12 @@ CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER)) # r31 holds current when in kernel mode -KBUILD_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2) +KBUILD_CFLAGS += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2) LDFLAGS := LDFLAGS_vmlinux := -LIBGCC := $(shell $(CC) $(KBUILD_KERNEL) -print-libgcc-file-name) +LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) head-y := arch/microblaze/kernel/head.o libs-y += arch/microblaze/lib/ -- cgit v1.2.3 From 866d72295d52353eeb0c36ccd8e5813dca869265 Mon Sep 17 00:00:00 2001 From: John Williams Date: Thu, 17 Sep 2009 21:21:22 +1000 Subject: microblaze: Ensure CPU usermode is set on new userspace processes Signed-off-by: John Williams --- arch/microblaze/kernel/process.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/microblaze') diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index 00b12c6d532..4201c743cc9 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -235,6 +235,7 @@ void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp) regs->pc = pc; regs->r1 = usp; regs->pt_mode = 0; + regs->msr |= MSR_UMS; } #ifdef CONFIG_MMU -- cgit v1.2.3 From 71b23d547b5a06f49acacaf742ebf1a85673f8d1 Mon Sep 17 00:00:00 2001 From: John Williams Date: Tue, 15 Sep 2009 12:29:55 +1000 Subject: microblaze: Clear sticky FSR register after generating exception signals FSR is sticky, so after the userspace exception/signal generation, clear it ready for next time. Signed-off-by: John Williams --- arch/microblaze/kernel/hw_exception_handler.S | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/microblaze') diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S index 0ad0f7011a1..6b0288ebccd 100644 --- a/arch/microblaze/kernel/hw_exception_handler.S +++ b/arch/microblaze/kernel/hw_exception_handler.S @@ -384,6 +384,8 @@ handle_other_ex: /* Handle Other exceptions here */ addk r8, r17, r0; /* Load exception address */ bralid r15, full_exception; /* Branch to the handler */ nop; + mts r0, rfsr; /* Clear sticky fsr */ + nop /* * Trigger execution of the signal handler by enabling -- cgit v1.2.3 From 7ba3fe55d0187cb16c5b205bb131893031b10e66 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 10 Sep 2009 08:16:46 +0200 Subject: microblaze: Remove ipc.h file which points to non-existing asm-generic file Signed-off-by: Michal Simek --- arch/microblaze/include/asm/ipc.h | 1 - 1 file changed, 1 deletion(-) delete mode 100644 arch/microblaze/include/asm/ipc.h (limited to 'arch/microblaze') diff --git a/arch/microblaze/include/asm/ipc.h b/arch/microblaze/include/asm/ipc.h deleted file mode 100644 index a46e3d9c2a3..00000000000 --- a/arch/microblaze/include/asm/ipc.h +++ /dev/null @@ -1 +0,0 @@ -#include -- cgit v1.2.3 From bfc32ad09bd5b077aac62f09e24d10374001c07b Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 15 Sep 2009 09:49:53 +0200 Subject: microblaze: Don't be noisy when userspace causes hardware exceptions Signed-off-by: Michal Simek --- arch/microblaze/kernel/exceptions.c | 31 ++++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-) (limited to 'arch/microblaze') diff --git a/arch/microblaze/kernel/exceptions.c b/arch/microblaze/kernel/exceptions.c index 0cb64a31e89..e64a5c7282a 100644 --- a/arch/microblaze/kernel/exceptions.c +++ b/arch/microblaze/kernel/exceptions.c @@ -72,7 +72,8 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, #endif #if 0 - printk(KERN_WARNING "Exception %02x in %s mode, FSR=%08x PC=%08x ESR=%08x\n", + printk(KERN_WARNING "Exception %02x in %s mode, FSR=%08x PC=%08x " \ + "ESR=%08x\n", type, user_mode(regs) ? "user" : "kernel", fsr, (unsigned int) regs->pc, (unsigned int) regs->esr); #endif @@ -80,42 +81,50 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, switch (type & 0x1F) { case MICROBLAZE_ILL_OPCODE_EXCEPTION: if (user_mode(regs)) { - printk(KERN_WARNING "Illegal opcode exception in user mode.\n"); + pr_debug(KERN_WARNING "Illegal opcode exception " \ + "in user mode.\n"); _exception(SIGILL, regs, ILL_ILLOPC, addr); return; } - printk(KERN_WARNING "Illegal opcode exception in kernel mode.\n"); + printk(KERN_WARNING "Illegal opcode exception " \ + "in kernel mode.\n"); die("opcode exception", regs, SIGBUS); break; case MICROBLAZE_IBUS_EXCEPTION: if (user_mode(regs)) { - printk(KERN_WARNING "Instruction bus error exception in user mode.\n"); + pr_debug(KERN_WARNING "Instruction bus error " \ + "exception in user mode.\n"); _exception(SIGBUS, regs, BUS_ADRERR, addr); return; } - printk(KERN_WARNING "Instruction bus error exception in kernel mode.\n"); + printk(KERN_WARNING "Instruction bus error exception " \ + "in kernel mode.\n"); die("bus exception", regs, SIGBUS); break; case MICROBLAZE_DBUS_EXCEPTION: if (user_mode(regs)) { - printk(KERN_WARNING "Data bus error exception in user mode.\n"); + pr_debug(KERN_WARNING "Data bus error exception " \ + "in user mode.\n"); _exception(SIGBUS, regs, BUS_ADRERR, addr); return; } - printk(KERN_WARNING "Data bus error exception in kernel mode.\n"); + printk(KERN_WARNING "Data bus error exception " \ + "in kernel mode.\n"); die("bus exception", regs, SIGBUS); break; case MICROBLAZE_DIV_ZERO_EXCEPTION: if (user_mode(regs)) { - printk(KERN_WARNING "Divide by zero exception in user mode\n"); + pr_debug(KERN_WARNING "Divide by zero exception " \ + "in user mode\n"); _exception(SIGILL, regs, ILL_ILLOPC, addr); return; } - printk(KERN_WARNING "Divide by zero exception in kernel mode.\n"); + printk(KERN_WARNING "Divide by zero exception " \ + "in kernel mode.\n"); die("Divide by exception", regs, SIGBUS); break; case MICROBLAZE_FPU_EXCEPTION: - printk(KERN_WARNING "FPU exception\n"); + pr_debug(KERN_WARNING "FPU exception\n"); /* IEEE FP exception */ /* I removed fsr variable and use code var for storing fsr */ if (fsr & FSR_IO) @@ -133,7 +142,7 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, #ifdef CONFIG_MMU case MICROBLAZE_PRIVILEGED_EXCEPTION: - printk(KERN_WARNING "Privileged exception\n"); + pr_debug(KERN_WARNING "Privileged exception\n"); /* "brk r0,r0" - used as debug breakpoint */ if (get_user(code, (unsigned long *)regs->pc) == 0 && code == 0x980c0000) { -- cgit v1.2.3 From 23902d95c9297fc1e214a705e57d46d69195b6b3 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 22 Sep 2009 08:58:47 +0200 Subject: microblaze: Generate correct signal and siginfo for integer div-by-zero Signed-off-by: John Williams --- arch/microblaze/kernel/exceptions.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/microblaze') diff --git a/arch/microblaze/kernel/exceptions.c b/arch/microblaze/kernel/exceptions.c index e64a5c7282a..d9f70f83097 100644 --- a/arch/microblaze/kernel/exceptions.c +++ b/arch/microblaze/kernel/exceptions.c @@ -116,7 +116,7 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, if (user_mode(regs)) { pr_debug(KERN_WARNING "Divide by zero exception " \ "in user mode\n"); - _exception(SIGILL, regs, ILL_ILLOPC, addr); + _exception(SIGILL, regs, FPE_INTDIV, addr); return; } printk(KERN_WARNING "Divide by zero exception " \ -- cgit v1.2.3 From f97b4f7de4a4d92e578845d517660942e851ca4f Mon Sep 17 00:00:00 2001 From: John Williams Date: Tue, 22 Sep 2009 09:13:04 +1000 Subject: microblaze: Updated CPU version and FPGA family codes in PVR Signed-off-by: John Williams Signed-off-by: Michal Simek --- arch/microblaze/kernel/cpu/cpuinfo.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/microblaze') diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c index c411c6757de..3539babc1c1 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo.c +++ b/arch/microblaze/kernel/cpu/cpuinfo.c @@ -28,6 +28,7 @@ const struct cpu_ver_key cpu_ver_lookup[] = { {"7.10.d", 0x0b}, {"7.20.a", 0x0c}, {"7.20.b", 0x0d}, + {"7.20.c", 0x0e}, /* FIXME There is no keycode defined in MBV for these versions */ {"2.10.a", 0x10}, {"3.00.a", 0x20}, @@ -49,6 +50,8 @@ const struct family_string_key family_string_lookup[] = { {"spartan3a", 0xa}, {"spartan3an", 0xb}, {"spartan3adsp", 0xc}, + {"spartan6", 0xd}, + {"virtex6", 0xe}, /* FIXME There is no key code defined for spartan2 */ {"spartan2", 0xf0}, {NULL, 0}, -- cgit v1.2.3 From 235754834b6818e727d6b8e240c4ec7f79e2f457 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 24 Aug 2009 13:26:04 +0200 Subject: microblaze: Support ptrace syscall tracing. Signed-off-by: Edgar E. Iglesias Signed-off-by: Michal Simek --- arch/microblaze/kernel/entry.S | 72 ++++++++++++++++++++++++++++++++++------- arch/microblaze/kernel/ptrace.c | 62 +++++++++++++++++++++++++++++++++++ 2 files changed, 122 insertions(+), 12 deletions(-) (limited to 'arch/microblaze') diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S index c7353e79f4a..acc1f05d1e2 100644 --- a/arch/microblaze/kernel/entry.S +++ b/arch/microblaze/kernel/entry.S @@ -308,38 +308,69 @@ C_ENTRY(_user_exception): swi r12, r1, PTO+PT_R0; tovirt(r1,r1) - la r15, r0, ret_from_trap-8 /* where the trap should return need -8 to adjust for rtsd r15, 8*/ /* Jump to the appropriate function for the system call number in r12 * (r12 is not preserved), or return an error if r12 is not valid. The LP * register should point to the location where * the called function should return. [note that MAKE_SYS_CALL uses label 1] */ - /* See if the system call number is valid. */ + + # Step into virtual mode. + set_vms; + addik r11, r0, 3f + rtid r11, 0 + nop +3: + add r11, r0, CURRENT_TASK /* Get current task ptr into r11 */ + lwi r11, r11, TS_THREAD_INFO /* get thread info */ + lwi r11, r11, TI_FLAGS /* get flags in thread info */ + andi r11, r11, _TIF_WORK_SYSCALL_MASK + beqi r11, 4f + + addik r3, r0, -ENOSYS + swi r3, r1, PTO + PT_R3 + brlid r15, do_syscall_trace_enter + addik r5, r1, PTO + PT_R0 + + # do_syscall_trace_enter returns the new syscall nr. + addk r12, r0, r3 + lwi r5, r1, PTO+PT_R5; + lwi r6, r1, PTO+PT_R6; + lwi r7, r1, PTO+PT_R7; + lwi r8, r1, PTO+PT_R8; + lwi r9, r1, PTO+PT_R9; + lwi r10, r1, PTO+PT_R10; +4: +/* Jump to the appropriate function for the system call number in r12 + * (r12 is not preserved), or return an error if r12 is not valid. + * The LP register should point to the location where the called function + * should return. [note that MAKE_SYS_CALL uses label 1] */ + /* See if the system call number is valid */ addi r11, r12, -__NR_syscalls; - bgei r11,1f; + bgei r11,5f; /* Figure out which function to use for this system call. */ /* Note Microblaze barrel shift is optional, so don't rely on it */ add r12, r12, r12; /* convert num -> ptr */ add r12, r12, r12; /* Trac syscalls and stored them to r0_ram */ - lwi r3, r12, 0x400 + TOPHYS(r0_ram) + lwi r3, r12, 0x400 + r0_ram addi r3, r3, 1 - swi r3, r12, 0x400 + TOPHYS(r0_ram) + swi r3, r12, 0x400 + r0_ram + + # Find and jump into the syscall handler. + lwi r12, r12, sys_call_table + /* where the trap should return need -8 to adjust for rtsd r15, 8 */ + la r15, r0, ret_from_trap-8 + bra r12 - lwi r12, r12, TOPHYS(sys_call_table); /* Function ptr */ - /* Make the system call. to r12*/ - set_vms; - rtid r12, 0; - nop; /* The syscall number is invalid, return an error. */ -1: VM_ON; /* RETURN() expects virtual mode*/ +5: addi r3, r0, -ENOSYS; rtsd r15,8; /* looks like a normal subroutine return */ or r0, r0, r0 -/* Entry point used to return from a syscall/trap. */ +/* Entry point used to return from a syscall/trap */ /* We re-enable BIP bit before state restore */ C_ENTRY(ret_from_trap): set_bip; /* Ints masked for state restore*/ @@ -347,6 +378,23 @@ C_ENTRY(ret_from_trap): /* See if returning to kernel mode, if so, skip resched &c. */ bnei r11, 2f; + /* We're returning to user mode, so check for various conditions that + * trigger rescheduling. */ + # FIXME: Restructure all these flag checks. + add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */ + lwi r11, r11, TS_THREAD_INFO; /* get thread info */ + lwi r11, r11, TI_FLAGS; /* get flags in thread info */ + andi r11, r11, _TIF_WORK_SYSCALL_MASK + beqi r11, 1f + + swi r3, r1, PTO + PT_R3 + swi r4, r1, PTO + PT_R4 + brlid r15, do_syscall_trace_leave + addik r5, r1, PTO + PT_R0 + lwi r3, r1, PTO + PT_R3 + lwi r4, r1, PTO + PT_R4 +1: + /* We're returning to user mode, so check for various conditions that * trigger rescheduling. */ /* Get current task ptr into r11 */ diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c index 53ff39af6a5..4b3ac32754d 100644 --- a/arch/microblaze/kernel/ptrace.c +++ b/arch/microblaze/kernel/ptrace.c @@ -29,6 +29,10 @@ #include #include #include +#include +#include +#include +#include #include #include @@ -174,6 +178,64 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) return rval; } +asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) +{ + long ret = 0; + + secure_computing(regs->r12); + + if (test_thread_flag(TIF_SYSCALL_TRACE) && + tracehook_report_syscall_entry(regs)) + /* + * Tracing decided this syscall should not happen. + * We'll return a bogus call number to get an ENOSYS + * error, but leave the original number in regs->regs[0]. + */ + ret = -1L; + + if (unlikely(current->audit_context)) + audit_syscall_entry(EM_XILINX_MICROBLAZE, regs->r12, + regs->r5, regs->r6, + regs->r7, regs->r8); + + return ret ?: regs->r12; +} + +asmlinkage void do_syscall_trace_leave(struct pt_regs *regs) +{ + int step; + + if (unlikely(current->audit_context)) + audit_syscall_exit(AUDITSC_RESULT(regs->r3), regs->r3); + + step = test_thread_flag(TIF_SINGLESTEP); + if (step || test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall_exit(regs, step); +} + +#if 0 +static asmlinkage void syscall_trace(void) +{ + if (!test_thread_flag(TIF_SYSCALL_TRACE)) + return; + if (!(current->ptrace & PT_PTRACED)) + return; + /* The 0x80 provides a way for the tracing parent to distinguish + between a syscall stop and SIGTRAP delivery */ + ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) + ? 0x80 : 0)); + /* + * this isn't the same as continuing with a signal, but it will do + * for normal use. strace only continues with a signal if the + * stopping signal is not SIGTRAP. -brl + */ + if (current->exit_code) { + send_sig(current->exit_code, current, 1); + current->exit_code = 0; + } +} +#endif + void ptrace_disable(struct task_struct *child) { /* nothing to do */ -- cgit v1.2.3 From d6f61770f910a976050458807ff8891e78303297 Mon Sep 17 00:00:00 2001 From: Lennart Sorensen Date: Thu, 17 Sep 2009 11:47:06 -0400 Subject: microblaze: Actually show KiB rather than pages in "Freeing initrd memory:" Fix "Freeing initrd memory:" message on microblaze to show kilobytes as claimed rather than number of pages. Signed-off-by: Lennart Sorensen Signed-off-by: Michal Simek --- arch/microblaze/mm/init.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/microblaze') diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c index f207f1a94db..42cbc15e015 100644 --- a/arch/microblaze/mm/init.c +++ b/arch/microblaze/mm/init.c @@ -180,7 +180,8 @@ void free_initrd_mem(unsigned long start, unsigned long end) totalram_pages++; pages++; } - printk(KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages); + printk(KERN_NOTICE "Freeing initrd memory: %dk freed\n", + (int)(pages * (PAGE_SIZE / 1024))); } #endif -- cgit v1.2.3 From 19086765140e979d955b536f87e755af43f3fdf5 Mon Sep 17 00:00:00 2001 From: John Williams Date: Mon, 22 Jun 2009 01:38:12 +0200 Subject: microblaze: Copy ppc asm-compat.h for clean handling of constants in asm and C Provides the ASM_CONST macro for creating asm-safe constants. No users yet, we'll be using it in upcoming page.h commit, for generating the LOAD_OFFSET macro Signed-off-by: John Williams --- arch/microblaze/include/asm/asm-compat.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 arch/microblaze/include/asm/asm-compat.h (limited to 'arch/microblaze') diff --git a/arch/microblaze/include/asm/asm-compat.h b/arch/microblaze/include/asm/asm-compat.h new file mode 100644 index 00000000000..e7bc9dc11b5 --- /dev/null +++ b/arch/microblaze/include/asm/asm-compat.h @@ -0,0 +1,17 @@ +#ifndef _ASM_MICROBLAZE_ASM_COMPAT_H +#define _ASM_MICROBLAZE_ASM_COMPAT_H + +#include + +#ifdef __ASSEMBLY__ +# define stringify_in_c(...) __VA_ARGS__ +# define ASM_CONST(x) x +#else +/* This version of stringify will deal with commas... */ +# define __stringify_in_c(...) #__VA_ARGS__ +# define stringify_in_c(...) __stringify_in_c(__VA_ARGS__) " " +# define __ASM_CONST(x) x##UL +# define ASM_CONST(x) __ASM_CONST(x) +#endif + +#endif /* _ASM_MICROBLAZE_ASM_COMPAT_H */ -- cgit v1.2.3 From a1253977dff4a033d61a7a96608f5a0bbb36dbf6 Mon Sep 17 00:00:00 2001 From: John Williams Date: Mon, 22 Jun 2009 01:38:13 +0200 Subject: microblaze: Create the LOAD_OFFSET macro used to compute VMA vs LMA offsets LOAD_OFFSET is the offset between the physical load address and the kernel's virtual address. It will be used in the upcoming commit to vmlinux.ld.S to make sure that the LMAs of sections in vmlinux are correct. Signed-off-by: John Williams --- arch/microblaze/include/asm/page.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/microblaze') diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h index 72aceae8868..880c988c223 100644 --- a/arch/microblaze/include/asm/page.h +++ b/arch/microblaze/include/asm/page.h @@ -17,6 +17,7 @@ #include #include +#include #include #ifdef __KERNEL__ @@ -26,6 +27,8 @@ #define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) +#define LOAD_OFFSET ASM_CONST((CONFIG_KERNEL_START-CONFIG_KERNEL_BASE_ADDR)) + #ifndef __ASSEMBLY__ #define PAGE_UP(addr) (((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1))) -- cgit v1.2.3 From a061dd5258b2bad6c44c48d2a2d55f4fd5eb85d8 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 22 Sep 2009 09:58:56 +0200 Subject: microblaze: Use LOAD_OFFSET macro to get correct LMA for all sections Currently, vmlinux has LMA==VMA for all sections, which is wrong for MMU kernels. Previous patches in this series defined the LOAD_OFFSET constant, now we make use of it in our link script. Other minor changes in this patch: * brace/indenting cleanup of some sections * put __fdt_* symbols in their own section, and apply LOAD_OFFSET fixup Signed-off-by: John Williams Signed-off-by: Michal Simek --- arch/microblaze/kernel/vmlinux.lds.S | 34 +++++++++++++++++++--------------- 1 file changed, 19 insertions(+), 15 deletions(-) (limited to 'arch/microblaze') diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S index b76c17c9ae4..dbb98f830f3 100644 --- a/arch/microblaze/kernel/vmlinux.lds.S +++ b/arch/microblaze/kernel/vmlinux.lds.S @@ -12,15 +12,15 @@ OUTPUT_FORMAT("elf32-microblaze", "elf32-microblaze", "elf32-microblaze") OUTPUT_ARCH(microblaze) ENTRY(_start) -#include #include +#include #include jiffies = jiffies_64 + 4; SECTIONS { . = CONFIG_KERNEL_START; - .text : { + .text : AT(ADDR(.text) - LOAD_OFFSET) { _text = . ; _stext = . ; *(.text .text.*) @@ -35,9 +35,12 @@ SECTIONS { } . = ALIGN (4) ; - _fdt_start = . ; /* place for fdt blob */ - . = . + 0x4000; - _fdt_end = . ; + __fdt_blob : AT(ADDR(__fdt_blob) - LOAD_OFFSET) { + _fdt_start = . ; /* place for fdt blob */ + *(__fdt_blob) ; /* Any link-placed DTB */ + . = _fdt_start + 0x4000; /* Pad up to 16kbyte */ + _fdt_end = . ; + } . = ALIGN(16); RODATA @@ -47,7 +50,7 @@ SECTIONS { * sdata2 section can go anywhere, but must be word aligned * and SDA2_BASE must point to the middle of it */ - .sdata2 : { + .sdata2 : AT(ADDR(.sdata2) - LOAD_OFFSET) { _ssrw = .; . = ALIGN(4096); /* page aligned when MMU used - origin 0x8 */ *(.sdata2) @@ -68,12 +71,12 @@ SECTIONS { /* Under the microblaze ABI, .sdata and .sbss must be contiguous */ . = ALIGN(8); - .sdata : { + .sdata : AT(ADDR(.sdata) - LOAD_OFFSET) { _ssro = .; *(.sdata) } - .sbss : { + .sbss : AT(ADDR(.sbss) - LOAD_OFFSET) { _ssbss = .; *(.sbss) _esbss = .; @@ -86,26 +89,26 @@ SECTIONS { INIT_TEXT_SECTION(PAGE_SIZE) - .init.data : { + .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { INIT_DATA } . = ALIGN(4); - .init.ivt : { + .init.ivt : AT(ADDR(.init.ivt) - LOAD_OFFSET) { __ivt_start = .; *(.init.ivt) __ivt_end = .; } - .init.setup : { + .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { INIT_SETUP(0) } - .initcall.init : { + .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET ) { INIT_CALLS } - .con_initcall.init : { + .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { CON_INITCALL } @@ -113,7 +116,7 @@ SECTIONS { __init_end_before_initramfs = .; - .init.ramfs ALIGN(4096) : { + .init.ramfs ALIGN(4096) : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { __initramfs_start = .; *(.init.ramfs) __initramfs_end = .; @@ -129,7 +132,8 @@ SECTIONS { } __init_end = .; - .bss ALIGN (4096) : { /* page aligned when MMU used */ + .bss ALIGN (4096) : AT(ADDR(.bss) - LOAD_OFFSET) { + /* page aligned when MMU used */ __bss_start = . ; *(.bss*) *(COMMON) -- cgit v1.2.3 From cfa9a775b9ddcef7f53c35e489a71cfed8c02710 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 22 Jun 2009 12:55:32 +0200 Subject: microblaze: Fix _start symbol to physical address _start is setup to physical kernel start address. This caused that when you load vmlinux (with MMU kernel) via XMD program counter (pc) is setup correctly and then you can write con and start kernel. Signed-off-by: Michal Simek --- arch/microblaze/kernel/vmlinux.lds.S | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/microblaze') diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S index dbb98f830f3..e704188d785 100644 --- a/arch/microblaze/kernel/vmlinux.lds.S +++ b/arch/microblaze/kernel/vmlinux.lds.S @@ -20,6 +20,7 @@ jiffies = jiffies_64 + 4; SECTIONS { . = CONFIG_KERNEL_START; + _start = CONFIG_KERNEL_BASE_ADDR; .text : AT(ADDR(.text) - LOAD_OFFSET) { _text = . ; _stext = . ; -- cgit v1.2.3 From f05131cd7a9521031ccb1afd6234ce57ff03ae45 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 14 Sep 2009 15:15:49 +0200 Subject: microblaze: Support simpleImage.dts make target Instead of remembering to specify DTB= on the make commandline, this commit allows the much friendlier make simpleImage. where .dts is expected to be found in arch/microblaze/boot/dts/ The resulting vmlinux, with the compiled DTS linked in, will be copied to boot/simpleImage. This mirrors the same functionality as on PowerPC, albeit achieving it in a slightly different way. + strip simpleImage file The size of output file is very similar to linux.bin. vmlinux - full elf without fdt blob simpleImage..unstrip - full elf with fdt blob simpleImage. - stripped elf with fdt blob Add symlink to generic system.dts in platform folder Signed-off-by: John Williams Signed-off-by: Michal Simek --- arch/microblaze/Makefile | 27 ++++++++++++++++++++---- arch/microblaze/boot/Makefile | 41 +++++++++++++++++++++++++++++++++++-- arch/microblaze/boot/dts/system.dts | 1 + arch/microblaze/boot/linked_dtb.S | 3 +++ 4 files changed, 66 insertions(+), 6 deletions(-) create mode 120000 arch/microblaze/boot/dts/system.dts create mode 100644 arch/microblaze/boot/linked_dtb.S (limited to 'arch/microblaze') diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile index 737a4dc72ed..34187354304 100644 --- a/arch/microblaze/Makefile +++ b/arch/microblaze/Makefile @@ -53,22 +53,41 @@ core-y += arch/microblaze/platform/ boot := arch/microblaze/boot +# Are we making a simpleImage. target? If so, crack out the boardname +DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS))) + +ifneq ($(DTB),) + core-y += $(boot)/ +endif + # defines filename extension depending memory management type ifeq ($(CONFIG_MMU),) MMU := -nommu endif -export MMU +export MMU DTB all: linux.bin +BOOT_TARGETS = linux.bin linux.bin.gz simpleImage.% + archclean: $(Q)$(MAKE) $(clean)=$(boot) -linux.bin linux.bin.gz: vmlinux +$(BOOT_TARGETS): vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ define archhelp - echo '* linux.bin - Create raw binary' - echo ' linux.bin.gz - Create compressed raw binary' + echo '* linux.bin - Create raw binary' + echo ' linux.bin.gz - Create compressed raw binary' + echo ' simpleImage.
- ELF image with $(arch)/boot/dts/
.dts linked in' + echo ' - stripped elf with fdt blob + echo ' simpleImage.
.unstrip - full ELF image with fdt blob' + echo ' *_defconfig - Select default config from arch/microblaze/configs' + echo '' + echo ' Targets with
embed a device tree blob inside the image' + echo ' These targets support board with firmware that does not' + echo ' support passing a device tree directly. Replace
with the' + echo ' name of a dts file from the arch/microblaze/boot/dts/ directory' + echo ' (minus the .dts extension).' endef diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile index c2bb043a029..21f13322a4c 100644 --- a/arch/microblaze/boot/Makefile +++ b/arch/microblaze/boot/Makefile @@ -2,10 +2,24 @@ # arch/microblaze/boot/Makefile # -targets := linux.bin linux.bin.gz +obj-y += linked_dtb.o + +targets := linux.bin linux.bin.gz simpleImage.% OBJCOPYFLAGS_linux.bin := -O binary +# Where the DTS files live +dtstree := $(srctree)/$(src)/dts + +# Ensure system.dtb exists +$(obj)/linked_dtb.o: $(obj)/system.dtb + +# Generate system.dtb from $(DTB).dtb +ifneq ($(DTB),system) +$(obj)/system.dtb: $(obj)/$(DTB).dtb + $(call if_changed,cp) +endif + $(obj)/linux.bin: vmlinux FORCE [ -n $(CONFIG_INITRAMFS_SOURCE) ] && [ ! -e $(CONFIG_INITRAMFS_SOURCE) ] && \ touch $(CONFIG_INITRAMFS_SOURCE) || echo "No CPIO image" @@ -16,4 +30,27 @@ $(obj)/linux.bin.gz: $(obj)/linux.bin FORCE $(call if_changed,gzip) @echo 'Kernel: $@ is ready' ' (#'`cat .version`')' -clean-kernel += linux.bin linux.bin.gz +quiet_cmd_cp = CP $< $@$2 + cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false) + +quiet_cmd_strip = STRIP $@ + cmd_strip = $(STRIP) -K _start -K _end -K __log_buf -K _fdt_start vmlinux -o $@ + +$(obj)/simpleImage.%: vmlinux FORCE + $(call if_changed,cp,.unstrip) + $(call if_changed,strip) + @echo 'Kernel: $@ is ready' ' (#'`cat .version`')' + +# Rule to build device tree blobs +DTC = $(objtree)/scripts/dtc/dtc + +# Rule to build device tree blobs +quiet_cmd_dtc = DTC $@ + cmd_dtc = $(DTC) -O dtb -o $(obj)/$*.dtb -b 0 -p 1024 $(dtstree)/$*.dts + +$(obj)/%.dtb: $(dtstree)/%.dts FORCE + $(call if_changed,dtc) + +clean-kernel += linux.bin linux.bin.gz simpleImage.* + +clean-files += *.dtb diff --git a/arch/microblaze/boot/dts/system.dts b/arch/microblaze/boot/dts/system.dts new file mode 120000 index 00000000000..7cb657892f2 --- /dev/null +++ b/arch/microblaze/boot/dts/system.dts @@ -0,0 +1 @@ +../../platform/generic/system.dts \ No newline at end of file diff --git a/arch/microblaze/boot/linked_dtb.S b/arch/microblaze/boot/linked_dtb.S new file mode 100644 index 00000000000..cb2b537aebe --- /dev/null +++ b/arch/microblaze/boot/linked_dtb.S @@ -0,0 +1,3 @@ +.section __fdt_blob,"a" +.incbin "arch/microblaze/boot/system.dtb" + -- cgit v1.2.3 From bfc8125858d777bd5bdba03a091c07cc2e0e17c0 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 22 Sep 2009 10:32:33 +0200 Subject: microblaze: Disable heartbeat/enable emaclite in defconfigs I need to disable heartbeat function because this features breaks testing in Qemu. Signed-off-by: Michal Simek --- arch/microblaze/configs/mmu_defconfig | 30 ++++++++++++++++------------ arch/microblaze/configs/nommu_defconfig | 35 +++++++++++++++++++-------------- 2 files changed, 37 insertions(+), 28 deletions(-) (limited to 'arch/microblaze') diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig index 09c32962b66..bb7c374713a 100644 --- a/arch/microblaze/configs/mmu_defconfig +++ b/arch/microblaze/configs/mmu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc6 -# Tue Aug 18 11:00:02 2009 +# Linux kernel version: 2.6.31 +# Thu Sep 24 10:28:50 2009 # CONFIG_MICROBLAZE=y # CONFIG_SWAP is not set @@ -42,11 +42,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=17 @@ -260,6 +261,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -357,12 +359,10 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_KS8842 is not set +CONFIG_XILINX_EMACLITE=y CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -460,6 +460,7 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -488,6 +489,7 @@ CONFIG_EXT2_FS=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -546,7 +548,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -671,18 +672,20 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set # CONFIG_SAMPLES is not set # CONFIG_KMEMCHECK is not set CONFIG_EARLY_PRINTK=y -CONFIG_HEART_BEAT=y +# CONFIG_HEART_BEAT is not set CONFIG_DEBUG_BOOTMEM=y # @@ -697,7 +700,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -729,11 +731,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig index 8b638615a97..adb839bab70 100644 --- a/arch/microblaze/configs/nommu_defconfig +++ b/arch/microblaze/configs/nommu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc6 -# Tue Aug 18 10:35:30 2009 +# Linux kernel version: 2.6.31 +# Thu Sep 24 10:29:43 2009 # CONFIG_MICROBLAZE=y # CONFIG_SWAP is not set @@ -44,11 +44,12 @@ CONFIG_BSD_PROCESS_ACCT_V3=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=17 @@ -243,6 +244,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -272,6 +274,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -279,7 +282,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -304,6 +306,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_OF_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set # @@ -349,6 +352,7 @@ CONFIG_MTD_RAM=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_PHYSMAP_OF is not set CONFIG_MTD_UCLINUX=y # CONFIG_MTD_PLATRAM is not set @@ -429,12 +433,10 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_KS8842 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -535,7 +537,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set @@ -579,6 +581,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -639,7 +642,6 @@ CONFIG_ROMFS_BACKED_BY_BLOCK=y CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -710,18 +712,20 @@ CONFIG_DEBUG_INFO=y CONFIG_DEBUG_LIST=y CONFIG_DEBUG_SG=y # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_PAGE_POISONING is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_EARLY_PRINTK=y -CONFIG_HEART_BEAT=y +# CONFIG_HEART_BEAT is not set # CONFIG_DEBUG_BOOTMEM is not set # @@ -736,7 +740,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -768,11 +771,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set -- cgit v1.2.3