From d4852a34e46679f0a36b7c8803eace2b9002cddc Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Sun, 6 Mar 2011 21:53:28 +1000 Subject: m68knommu: make ColdFire internal peripheral region configurable Most ColdFire CPUs have an internal peripheral set that can be mapped at a user selectable address. Different ColdFire parts either use an MBAR register of an IPSBAR register to map the peripheral region. Most boards use the Freescale default mappings - but not all. Make the setting of the MBAR or IPSBAR register configurable. And only make the selection available on the appropriate ColdFire CPU types. Signed-off-by: Greg Ungerer --- arch/m68knommu/Kconfig | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) (limited to 'arch/m68knommu') diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index 04c7d348fbe..b597ce07142 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -79,6 +79,12 @@ config HAVE_CACHE_SPLIT config HAVE_CACHE_CB bool +config HAVE_MBAR + bool + +config HAVE_IPSBAR + bool + source "init/Kconfig" source "kernel/Kconfig.freezer" @@ -112,12 +118,14 @@ config M68360 config M5206 bool "MCF5206" select COLDFIRE_SW_A7 + select HAVE_MBAR help Motorola ColdFire 5206 processor support. config M5206e bool "MCF5206e" select COLDFIRE_SW_A7 + select HAVE_MBAR help Motorola ColdFire 5206e processor support. @@ -132,30 +140,35 @@ config M523x bool "MCF523x" select GENERIC_CLOCKEVENTS select HAVE_CACHE_SPLIT + select HAVE_IPSBAR help Freescale Coldfire 5230/1/2/4/5 processor support config M5249 bool "MCF5249" select COLDFIRE_SW_A7 + select HAVE_MBAR help Motorola ColdFire 5249 processor support. config M5271 bool "MCF5271" select HAVE_CACHE_SPLIT + select HAVE_IPSBAR help Freescale (Motorola) ColdFire 5270/5271 processor support. config M5272 bool "MCF5272" select COLDFIRE_SW_A7 + select HAVE_MBAR help Motorola ColdFire 5272 processor support. config M5275 bool "MCF5275" select HAVE_CACHE_SPLIT + select HAVE_IPSBAR help Freescale (Motorola) ColdFire 5274/5275 processor support. @@ -163,6 +176,7 @@ config M528x bool "MCF528x" select GENERIC_CLOCKEVENTS select HAVE_CACHE_SPLIT + select HAVE_IPSBAR help Motorola ColdFire 5280/5282 processor support. @@ -170,6 +184,7 @@ config M5307 bool "MCF5307" select COLDFIRE_SW_A7 select HAVE_CACHE_CB + select HAVE_MBAR help Motorola ColdFire 5307 processor support. @@ -183,18 +198,21 @@ config M5407 bool "MCF5407" select COLDFIRE_SW_A7 select HAVE_CACHE_CB + select HAVE_MBAR help Motorola ColdFire 5407 processor support. config M547x bool "MCF547x" select HAVE_CACHE_CB + select HAVE_MBAR help Freescale ColdFire 5470/5471/5472/5473/5474/5475 processor support. config M548x bool "MCF548x" select HAVE_CACHE_CB + select HAVE_MBAR help Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support. @@ -650,6 +668,28 @@ config VECTORBASE platforms this address is programmed into the VBR register, thus actually setting the address to use. +config MBAR + hex "Address of the MBAR (internal peripherals)" + default "0x10000000" + depends on HAVE_MBAR + help + Define the address of the internal system peripherals. This value + is set in the processors MBAR register. This is generally setup by + the boot loader, and will not be written by the kernel. By far most + ColdFire boards use the default 0x10000000 value, so if unsure then + use this. + +config IPSBAR + hex "Address of the IPSBAR (internal peripherals)" + default "0x40000000" + depends on HAVE_IPSBAR + help + Define the address of the internal system peripherals. This value + is set in the processors IPSBAR register. This is generally setup by + the boot loader, and will not be written by the kernel. By far most + ColdFire boards use the default 0x40000000 value, so if unsure then + use this. + config KERNELBASE hex "Address of the base of kernel code" default "0x400" -- cgit v1.2.3