From 76d61e4ee05dd904e7594d4c330b9c47ea51fe12 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Mon, 14 Jun 2010 18:15:24 +0800 Subject: [ARM] pxa/corgi: fix MMC/SD card detection failure Reported-by: Andrea Adami Signed-off-by: Eric Miao --- arch/arm/mach-pxa/corgi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 3d1dcb9ac08..51ffa6afb67 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -446,7 +446,7 @@ static struct platform_device corgiled_device = { static struct pxamci_platform_data corgi_mci_platform_data = { .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .gpio_card_detect = -1, + .gpio_card_detect = CORGI_GPIO_nSD_DETECT, .gpio_card_ro = CORGI_GPIO_nSD_WP, .gpio_power = CORGI_GPIO_SD_PWR, }; -- cgit v1.2.3 From 3d3d0fbf4dca6bbca5e9ffff9653c3df031c3449 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 24 Jun 2010 15:57:12 +0200 Subject: [ARM] pxa: cpufreq-pxa2xx: fix DRI recomputation routine This patch: 1) Simpifies the DRI recomputation routine by pulling out the common code 2) Fixes a bug in PXA27x DRI recomputation caused by incorrect parenthesis Signed-off-by: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/cpufreq-pxa2xx.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c index 9e4d9816726..268a9bc6be8 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c @@ -256,13 +256,9 @@ static void init_sdram_rows(void) static u32 mdrefr_dri(unsigned int freq) { - u32 dri = 0; + u32 interval = freq * SDRAM_TREF / sdram_rows; - if (cpu_is_pxa25x()) - dri = ((freq * SDRAM_TREF) / (sdram_rows * 32)); - if (cpu_is_pxa27x()) - dri = ((freq * SDRAM_TREF) / (sdram_rows - 31)) / 32; - return dri; + return (interval - (cpu_is_pxa27x() ? 31 : 0)) / 32; } /* find a valid frequency point */ -- cgit v1.2.3 From 5e16e3cb83caa4b4011664c3a3e1101f8a8561dd Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 13 Jul 2010 09:41:28 +0800 Subject: [ARM] pxa: fix incorrect order of AC97 reset pin configs Reported-by: Dylan Cristiani Signed-off-by: Eric Miao --- arch/arm/mach-pxa/pxa27x.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 0af36177ff0..c059dac02b6 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -41,10 +41,10 @@ void pxa27x_clear_otgph(void) EXPORT_SYMBOL(pxa27x_clear_otgph); static unsigned long ac97_reset_config[] = { - GPIO95_AC97_nRESET, - GPIO95_GPIO, - GPIO113_AC97_nRESET, GPIO113_GPIO, + GPIO113_AC97_nRESET, + GPIO95_GPIO, + GPIO95_AC97_nRESET, }; void pxa27x_assert_ac97reset(int reset_gpio, int on) -- cgit v1.2.3 From 7fad69861dba7d84ad94cf917cf33b37c74193e5 Mon Sep 17 00:00:00 2001 From: pieterg Date: Thu, 8 Jul 2010 19:04:05 +0200 Subject: [ARM] pxa/colibri-pxa300: fix AC97 init The wrong CONFIG defines were checked, and the include was missing Signed-off-by: pieter Acked-by: Marek Vasut Acked-by: Daniel Mack Signed-off-by: Eric Miao --- arch/arm/mach-pxa/colibri-pxa300.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index 45c23fd6df3..40b6ac2de87 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -26,6 +26,7 @@ #include #include #include +#include #include "generic.h" #include "devices.h" @@ -145,7 +146,7 @@ static void __init colibri_pxa300_init_lcd(void) static inline void colibri_pxa300_init_lcd(void) {} #endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */ -#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE) +#if defined(CONFIG_SND_AC97_CODEC) || defined(CONFIG_SND_AC97_CODEC_MODULE) static mfp_cfg_t colibri_pxa310_ac97_pin_config[] __initdata = { GPIO24_AC97_SYSCLK, GPIO23_AC97_nACRESET, -- cgit v1.2.3 From 3fea60261e73dbf4a51130d40cafcc8465b0f2c3 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 20 Jul 2010 20:25:35 -0700 Subject: Input: twl40300-keypad - fix handling of "all ground" rows The Nokia RX51 board code (arch/arm/mach-omap2/board-rx51-peripherals.c) defines a key map for the matrix keypad keyboard. The hardware seems to use all of the 8 rows and 8 columns of the keypad, although not all possible locations are used. The TWL4030 supports keypads with at most 8 rows and 8 columns. Most keys are defined with a row and column number between 0 and 7, except KEY(0xff, 2, KEY_F9), KEY(0xff, 4, KEY_F10), KEY(0xff, 5, KEY_F11), which represent keycodes that should be emitted when entire row is connected to the ground. since the driver handles this case as if we had an extra column in the key matrix. Unfortunately we do not allocate enough space and end up owerwriting some random memory. Reported-and-tested-by: Laurent Pinchart Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov --- arch/arm/mach-omap2/board-rx51-peripherals.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index abdf321c2d4..c5555ca13d0 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -175,6 +175,10 @@ static void __init rx51_add_gpio_keys(void) #endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */ static int board_keymap[] = { + /* + * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row + * connected to the ground" matrix state. + */ KEY(0, 0, KEY_Q), KEY(0, 1, KEY_O), KEY(0, 2, KEY_P), @@ -182,6 +186,7 @@ static int board_keymap[] = { KEY(0, 4, KEY_BACKSPACE), KEY(0, 6, KEY_A), KEY(0, 7, KEY_S), + KEY(1, 0, KEY_W), KEY(1, 1, KEY_D), KEY(1, 2, KEY_F), @@ -190,6 +195,7 @@ static int board_keymap[] = { KEY(1, 5, KEY_J), KEY(1, 6, KEY_K), KEY(1, 7, KEY_L), + KEY(2, 0, KEY_E), KEY(2, 1, KEY_DOT), KEY(2, 2, KEY_UP), @@ -197,6 +203,8 @@ static int board_keymap[] = { KEY(2, 5, KEY_Z), KEY(2, 6, KEY_X), KEY(2, 7, KEY_C), + KEY(2, 8, KEY_F9), + KEY(3, 0, KEY_R), KEY(3, 1, KEY_V), KEY(3, 2, KEY_B), @@ -205,20 +213,23 @@ static int board_keymap[] = { KEY(3, 5, KEY_SPACE), KEY(3, 6, KEY_SPACE), KEY(3, 7, KEY_LEFT), + KEY(4, 0, KEY_T), KEY(4, 1, KEY_DOWN), KEY(4, 2, KEY_RIGHT), KEY(4, 4, KEY_LEFTCTRL), KEY(4, 5, KEY_RIGHTALT), KEY(4, 6, KEY_LEFTSHIFT), + KEY(4, 8, KEY_10), + KEY(5, 0, KEY_Y), + KEY(5, 8, KEY_11), + KEY(6, 0, KEY_U), + KEY(7, 0, KEY_I), KEY(7, 1, KEY_F7), KEY(7, 2, KEY_F8), - KEY(0xff, 2, KEY_F9), - KEY(0xff, 4, KEY_F10), - KEY(0xff, 5, KEY_F11), }; static struct matrix_keymap_data board_map_data = { -- cgit v1.2.3 From a7029c82622f6483a27ebe7ed61b622e1a00664d Mon Sep 17 00:00:00 2001 From: wanzongshun Date: Sun, 18 Jul 2010 15:10:07 +0100 Subject: ARM: 6230/1: fix nuc900 touchscreen clk definition bug This patch is to fix nuc900 touchscreen clk definition bug,the .dev_id's name should be 'nuc900-ts', it should be the same to pdev.name. or else, the touchscreen driver will be not working well due to clock engine disabled. Signed-off-by: Wan ZongShun Signed-off-by: Russell King --- arch/arm/mach-w90x900/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c index 642207e1819..83c56324a47 100644 --- a/arch/arm/mach-w90x900/cpu.c +++ b/arch/arm/mach-w90x900/cpu.c @@ -93,7 +93,7 @@ static struct clk_lookup nuc900_clkregs[] = { DEF_CLKLOOK(&clk_kpi, "nuc900-kpi", NULL), DEF_CLKLOOK(&clk_wdt, "nuc900-wdt", NULL), DEF_CLKLOOK(&clk_gdma, "nuc900-gdma", NULL), - DEF_CLKLOOK(&clk_adc, "nuc900-adc", NULL), + DEF_CLKLOOK(&clk_adc, "nuc900-ts", NULL), DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL), DEF_CLKLOOK(&clk_ext, NULL, "ext"), DEF_CLKLOOK(&clk_timer0, NULL, "timer0"), -- cgit v1.2.3 From 64dd3b74de7aaa5a7a7dc2a5904a063899ee81cb Mon Sep 17 00:00:00 2001 From: wanzongshun Date: Mon, 19 Jul 2010 04:06:12 +0100 Subject: ARM: 6233/1: Delete a wrong redundant right parenthesis Delete a wrong redundant right parenthesis in arch/arm/mach-footbridge/common.c Signed-off-by: Wan ZongShun Signed-off-by: Russell King --- arch/arm/mach-footbridge/common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index e3bc3f6f6b1..88b3dd89be8 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -232,7 +232,7 @@ EXPORT_SYMBOL(__bus_to_virt); unsigned long __pfn_to_bus(unsigned long pfn) { - return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET)); + return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET); } EXPORT_SYMBOL(__pfn_to_bus); -- cgit v1.2.3 From 9729c0ca197a5030d65937be6a1fb41b8d6f9c86 Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Thu, 22 Jul 2010 16:34:34 +0100 Subject: ARM: 6258/1: arm/h720x: fix debug macro compilation failure IO_BASE shoule be IO_VIRT, and IO_START should be IO_PHYS. We also need mach/hardware.h for these definitions. Signed-off-by: Jeremy Kerr Signed-off-by: Russell King --- arch/arm/mach-h720x/include/mach/debug-macro.S | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S index a9ee8f0d48b..27cafd12f03 100644 --- a/arch/arm/mach-h720x/include/mach/debug-macro.S +++ b/arch/arm/mach-h720x/include/mach/debug-macro.S @@ -11,8 +11,10 @@ * */ - .equ io_virt, IO_BASE - .equ io_phys, IO_START +#include + + .equ io_virt, IO_VIRT + .equ io_phys, IO_PHYS .macro addruart, rx, tmp mrc p15, 0, \rx, c1, c0 -- cgit v1.2.3 From f63a79f65358d27a25fa31f912738b61bfcec589 Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Thu, 22 Jul 2010 16:34:34 +0100 Subject: ARM: 6259/1: arm/ns9xxx: fix debug macro compilation failure We need asm/memory.h for NS9XXX_CSxSTAT_PHYS (via mach/memory.h). Signed-off-by: Jeremy Kerr Signed-off-by: Russell King --- arch/arm/mach-ns9xxx/include/mach/debug-macro.S | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S index 0859336a8e6..5c934bdb715 100644 --- a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S +++ b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S @@ -8,6 +8,7 @@ * the Free Software Foundation. */ #include +#include #include -- cgit v1.2.3 From e6b8b3e21a85b06b0617401f5ad8018b9927f6ac Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Thu, 22 Jul 2010 16:34:34 +0100 Subject: ARM: 6260/1: arm/plat-spear: fix debug macro compilation failure mov rx, = isn't valid, use # instead. Signed-off-by: Jeremy Kerr Signed-off-by: Russell King --- arch/arm/plat-spear/include/plat/debug-macro.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S index 1670734b7e5..37fa593884e 100644 --- a/arch/arm/plat-spear/include/plat/debug-macro.S +++ b/arch/arm/plat-spear/include/plat/debug-macro.S @@ -17,8 +17,8 @@ .macro addruart, rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? - moveq \rx, =SPEAR_DBG_UART_BASE @ Physical base - movne \rx, =VA_SPEAR_DBG_UART_BASE @ Virtual base + moveq \rx, #SPEAR_DBG_UART_BASE @ Physical base + movne \rx, #VA_SPEAR_DBG_UART_BASE @ Virtual base .endm .macro senduart, rd, rx -- cgit v1.2.3 From 31e967daab6c79b68829875fb67bdb9abfac52a4 Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Thu, 22 Jul 2010 16:34:34 +0100 Subject: ARM: 6261/1: arm/shark: fix debug macro compilation failure We need a waituart macro. Signed-off-by: Jeremy Kerr Signed-off-by: Russell King --- arch/arm/mach-shark/include/mach/debug-macro.S | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S index 50f071c5bf4..5ea24d4d1ba 100644 --- a/arch/arm/mach-shark/include/mach/debug-macro.S +++ b/arch/arm/mach-shark/include/mach/debug-macro.S @@ -20,6 +20,9 @@ strb \rd, [\rx] .endm + .macro waituart,rd,rx + .endm + .macro busyuart,rd,rx mov \rd, #0 1001: add \rd, \rd, #1 -- cgit v1.2.3 From 73bcc76aeee6afb21471ad9ec33341c7452b4d6f Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Thu, 22 Jul 2010 16:34:34 +0100 Subject: ARM: 6262/1: arm/clps711x: fix debug macro compilation failure We need mach/hardware.h for CLPS7111_VIRT_BASE. Signed-off-by: Jeremy Kerr Signed-off-by: Russell King --- arch/arm/mach-clps711x/include/mach/debug-macro.S | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S index fedd8076a68..072cc6b61ba 100644 --- a/arch/arm/mach-clps711x/include/mach/debug-macro.S +++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S @@ -11,6 +11,7 @@ * */ +#include #include .macro addruart, rx, tmp -- cgit v1.2.3 From 51aa87beb9dff42ccc3612811e83d1ad98141e0b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Fri, 23 Jul 2010 10:46:52 +0100 Subject: ARM: 6263/1: ns9xxx: fix FTBFS for zImage MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit the different putc variants used an initialized local static variable which is broken since 5de813b (ARM: Eliminate decompressor -Dstatic= PIC hack) This needs to be initialized at runtime and so needs to be global. While at it give it a better name. Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/mach-ns9xxx/include/mach/uncompress.h | 30 +++++++++++++------------- 1 file changed, 15 insertions(+), 15 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ns9xxx/include/mach/uncompress.h b/arch/arm/mach-ns9xxx/include/mach/uncompress.h index 1b12d324b08..770a68c46e8 100644 --- a/arch/arm/mach-ns9xxx/include/mach/uncompress.h +++ b/arch/arm/mach-ns9xxx/include/mach/uncompress.h @@ -20,50 +20,49 @@ static void putc_dummy(char c, void __iomem *base) /* nothing */ } +static int timeout; + static void putc_ns9360(char c, void __iomem *base) { - static int t = 0x10000; do { - if (t) - --t; + if (timeout) + --timeout; if (__raw_readl(base + 8) & (1 << 3)) { __raw_writeb(c, base + 16); - t = 0x10000; + timeout = 0x10000; break; } - } while (t); + } while (timeout); } static void putc_a9m9750dev(char c, void __iomem *base) { - static int t = 0x10000; do { - if (t) - --t; + if (timeout) + --timeout; if (__raw_readb(base + 5) & (1 << 5)) { __raw_writeb(c, base); - t = 0x10000; + timeout = 0x10000; break; } - } while (t); + } while (timeout); } static void putc_ns921x(char c, void __iomem *base) { - static int t = 0x10000; do { - if (t) - --t; + if (timeout) + --timeout; if (!(__raw_readl(base) & (1 << 11))) { __raw_writeb(c, base + 0x0028); - t = 0x10000; + timeout = 0x10000; break; } - } while (t); + } while (timeout); } #define MSCS __REG(0xA0900184) @@ -89,6 +88,7 @@ static void putc_ns921x(char c, void __iomem *base) static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base) { + timeout = 0x10000; if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) { /* ns9360 or ns9750 */ if (NS9360_UART_ENABLED(NS9360_UARTA)) { -- cgit v1.2.3 From f9578fc07832ee8db8b0fbde489e00ad35452ac9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Sat, 24 Jul 2010 09:53:20 +0100 Subject: ARM: 6265/1: kirkwood: move qnap_tsx1x_register_flash() to .init.text MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit qnap_tsx1x_register_flash is only called by qnap_ts219_init and qnap_ts41x_init which both live in .init.text, too. So the move is OK. This fixes the following warning in kirkwood_defconfig: WARNING: vmlinux.o(.text+0x9334): Section mismatch in reference from the function qnap_tsx1x_register_flash() to the variable .init.data:qnap_tsx1x_spi_slave_info The function qnap_tsx1x_register_flash() references the variable __initdata qnap_tsx1x_spi_slave_info. This is often because qnap_tsx1x_register_flash lacks a __initdata annotation or the annotation of qnap_tsx1x_spi_slave_info is wrong. Signed-off-by: Uwe Kleine-König Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/mach-kirkwood/tsx1x-common.c | 2 +- arch/arm/mach-kirkwood/tsx1x-common.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c index 7221c20b2af..f781164e623 100644 --- a/arch/arm/mach-kirkwood/tsx1x-common.c +++ b/arch/arm/mach-kirkwood/tsx1x-common.c @@ -77,7 +77,7 @@ struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = { }, }; -void qnap_tsx1x_register_flash(void) +void __init qnap_tsx1x_register_flash(void) { spi_register_board_info(qnap_tsx1x_spi_slave_info, ARRAY_SIZE(qnap_tsx1x_spi_slave_info)); diff --git a/arch/arm/mach-kirkwood/tsx1x-common.h b/arch/arm/mach-kirkwood/tsx1x-common.h index 9a592962a6e..7fa037361b5 100644 --- a/arch/arm/mach-kirkwood/tsx1x-common.h +++ b/arch/arm/mach-kirkwood/tsx1x-common.h @@ -1,7 +1,7 @@ #ifndef __ARCH_KIRKWOOD_TSX1X_COMMON_H #define __ARCH_KIRKWOOD_TSX1X_COMMON_H -extern void qnap_tsx1x_register_flash(void); +extern void __init qnap_tsx1x_register_flash(void); extern void qnap_tsx1x_power_off(void); #endif -- cgit v1.2.3 From 2e65a2075cc740b485ab203430bdf3459d5551b6 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 26 Jul 2010 01:12:37 -0700 Subject: Input: RX51 keymap - fix recent compile breakage Commit 3fea60261e73 ("Input: twl40300-keypad - fix handling of "all ground" rows") broke compilation as I managed to use non-existent keycodes. Reported-by: Arjan van de Ven Signed-off-by: Dmitry Torokhov Signed-off-by: Linus Torvalds --- arch/arm/mach-omap2/board-rx51-peripherals.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index c5555ca13d0..03483920ed6 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -220,10 +220,10 @@ static int board_keymap[] = { KEY(4, 4, KEY_LEFTCTRL), KEY(4, 5, KEY_RIGHTALT), KEY(4, 6, KEY_LEFTSHIFT), - KEY(4, 8, KEY_10), + KEY(4, 8, KEY_F10), KEY(5, 0, KEY_Y), - KEY(5, 8, KEY_11), + KEY(5, 8, KEY_F11), KEY(6, 0, KEY_U), -- cgit v1.2.3 From 8b24599e72c9aee1ea1187e29cb9c5de9f449cce Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Mon, 12 Jul 2010 17:56:21 +0530 Subject: davinci: da850/omap-l138 evm: account for DEFDCDC{2,3} being tied high Per the da850/omap-l138 Beta EVM SOM schematic, the DEFDCDC2 and DEFDCDC3 lines are tied high. This leads to a 3.3V IO and 1.2V CVDD voltage. Pass the right platform data to the TPS6507x driver so it can operate on the DEFDCDC{2,3}_HIGH register to read and change voltage levels. Signed-off-by: Sekhar Nori Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- arch/arm/mach-davinci/board-da850-evm.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 2ec3095ffb7..b280efb1fa1 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -469,6 +470,11 @@ struct regulator_consumer_supply tps65070_ldo2_consumers[] = { }, }; +/* We take advantage of the fact that both defdcdc{2,3} are tied high */ +static struct tps6507x_reg_platform_data tps6507x_platform_data = { + .defdcdc_default = true, +}; + struct regulator_init_data tps65070_regulator_data[] = { /* dcdc1 */ { @@ -494,6 +500,7 @@ struct regulator_init_data tps65070_regulator_data[] = { }, .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers), .consumer_supplies = tps65070_dcdc2_consumers, + .driver_data = &tps6507x_platform_data, }, /* dcdc3 */ @@ -507,6 +514,7 @@ struct regulator_init_data tps65070_regulator_data[] = { }, .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers), .consumer_supplies = tps65070_dcdc3_consumers, + .driver_data = &tps6507x_platform_data, }, /* ldo1 */ -- cgit v1.2.3 From 58c7d9d2e6116ec694a5af5b8a0aca1467673899 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 29 Jul 2010 13:09:36 +0100 Subject: ARM: 6276/1: mach-shmobile: remove duplicate NR_IRQS_LEGACY NR_IRQS_LEGACY is now defined in asm/irq.h, so drop it in mach/irqs.h. Signed-off-by: Magnus Damm Signed-off-by: Russell King --- arch/arm/mach-shmobile/include/mach/irqs.h | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h index 5179b72e1ee..132256bb8c8 100644 --- a/arch/arm/mach-shmobile/include/mach/irqs.h +++ b/arch/arm/mach-shmobile/include/mach/irqs.h @@ -2,7 +2,6 @@ #define __ASM_MACH_IRQS_H #define NR_IRQS 512 -#define NR_IRQS_LEGACY 8 #define evt2irq(evt) (((evt) >> 5) - 16) #define irq2evt(irq) (((irq) + 16) << 5) -- cgit v1.2.3 From 5da3e714e30d40145f4dd37d79de6bbbcb9e6137 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 29 Jul 2010 14:03:04 +0100 Subject: ARM: 6277/1: mach-shmobile: Allow users to select HZ, default to 128 Introduce SHMOBILE_TIMER_HZ for SH-Mobile. Allow users to select HZ on their system to minimize potential timer drift. Use 128 Hz as default to work well with the 32768 Hz RCLK. Signed-off-by: Magnus Damm Signed-off-by: Russell King --- arch/arm/Kconfig | 1 + arch/arm/mach-shmobile/Kconfig | 12 ++++++++++++ 2 files changed, 13 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 98922f7d2d1..db4f2ee3a75 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1189,6 +1189,7 @@ config HZ default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210 default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER default AT91_TIMER_HZ if ARCH_AT91 + default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE default 100 config THUMB2_KERNEL diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index f2b88c5fe14..4c704b4e8b3 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -70,6 +70,18 @@ endmenu menu "Timer and clock configuration" +config SHMOBILE_TIMER_HZ + int "Kernel HZ (jiffies per second)" + range 32 1024 + default "128" + help + Allows the configuration of the timer frequency. It is customary + to have the timer interrupt run at 1000 Hz or 100 Hz, but in the + case of low timer frequencies other values may be more suitable. + SH-Mobile systems using a 32768 Hz RCLK for clock events may want + to select a HZ value such as 128 that can evenly divide RCLK. + A HZ value that does not divide evenly may cause timer drift. + config SH_TIMER_CMT bool "CMT timer driver" default y -- cgit v1.2.3