From 72e9622c2a2eb73d82c716504cc93d22cd3cfd8e Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <lg@denx.de>
Date: Tue, 25 Nov 2008 18:57:08 +0100
Subject: [ARM] pxa/pcm990: use negative number for an invalid GPIO in camera
 data

0 is a valid GPIO number, use a negative number to specify, that this camera
doesn't have a GPIO for bus-width switching.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/pcm990-baseboard.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index f601425f1b1..b36cec5c9ee 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -385,6 +385,7 @@ static struct soc_camera_link iclink[] = {
 		.gpio	= NR_BUILTIN_GPIO + 1,
 	}, {
 		.bus_id	= 0, /* Must match with the camera ID above */
+		.gpio	= -ENXIO,
 	}
 };
 
-- 
cgit v1.2.3


From 2fd36a5d6e830269a37f0f6ccfd34ee0517ebc7d Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Wed, 26 Nov 2008 12:51:42 +0800
Subject: [ARM] pxa/corgi: update default config to exclude tosa from being
 built

Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/configs/corgi_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index f3af0b593eb..98765438048 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -179,7 +179,7 @@ CONFIG_MACH_HUSKY=y
 # CONFIG_MACH_AKITA is not set
 # CONFIG_MACH_SPITZ is not set
 # CONFIG_MACH_BORZOI is not set
-CONFIG_MACH_TOSA=y
+# CONFIG_MACH_TOSA is not set
 # CONFIG_ARCH_VIPER is not set
 # CONFIG_ARCH_PXA_ESERIES is not set
 # CONFIG_TRIZEPS_PXA is not set
-- 
cgit v1.2.3


From a730b327ca70f0e4d933202e3979e96613c3585f Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Thu, 20 Nov 2008 17:34:57 +0100
Subject: [ARM] pxa/palmtx: misc fixes to use generic GPIO API

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/palmtx.c | 150 +++++++++++++++++++++++++++++++++++----------
 1 file changed, 118 insertions(+), 32 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 4447711c9fc..a9d94f5dbec 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -56,6 +56,9 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO110_MMC_DAT_2,
 	GPIO111_MMC_DAT_3,
 	GPIO112_MMC_CMD,
+	GPIO14_GPIO,	/* SD detect */
+	GPIO114_GPIO,	/* SD power */
+	GPIO115_GPIO,	/* SD r/o switch */
 
 	/* AC97 */
 	GPIO28_AC97_BITCLK,
@@ -64,6 +67,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO31_AC97_SYNC,
 
 	/* IrDA */
+	GPIO40_GPIO,	/* ir disable */
 	GPIO46_FICP_RXD,
 	GPIO47_FICP_TXD,
 
@@ -71,7 +75,8 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO16_PWM0_OUT,
 
 	/* USB */
-	GPIO13_GPIO,
+	GPIO13_GPIO,	/* usb detect */
+	GPIO95_GPIO,	/* usb power */
 
 	/* PCMCIA */
 	GPIO48_nPOE,
@@ -84,6 +89,45 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO55_nPREG,
 	GPIO56_nPWAIT,
 	GPIO57_nIOIS16,
+	GPIO94_GPIO,	/* wifi power 1 */
+	GPIO108_GPIO,	/* wifi power 2 */
+	GPIO116_GPIO,	/* wifi ready */
+
+	/* MATRIX KEYPAD */
+	GPIO100_KP_MKIN_0,
+	GPIO101_KP_MKIN_1,
+	GPIO102_KP_MKIN_2,
+	GPIO97_KP_MKIN_3,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* MISC. */
+	GPIO10_GPIO,	/* hotsync button */
+	GPIO12_GPIO,	/* power detect */
+	GPIO107_GPIO,	/* earphone detect */
 };
 
 /******************************************************************************
@@ -95,32 +139,49 @@ static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int,
 	int err = 0;
 
 	/* Setup an interrupt for detecting card insert/remove events */
-	err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int,
-			IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+	err = gpio_request(GPIO_NR_PALMTX_SD_DETECT_N, "SD IRQ");
+	if (err)
+		goto err;
+	err = gpio_direction_input(GPIO_NR_PALMTX_SD_DETECT_N);
+	if (err)
+		goto err2;
+	err = request_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N),
+			palmtx_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
 			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
 			"SD/MMC card detect", data);
 	if (err) {
 		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
 				__func__);
-		return err;
+		goto err2;
 	}
 
 	err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
 	if (err)
-		goto pwr_err;
+		goto err3;
+	err = gpio_direction_output(GPIO_NR_PALMTX_SD_POWER, 0);
+	if (err)
+		goto err4;
 
 	err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
 	if (err)
-		goto ro_err;
+		goto err4;
+	err = gpio_direction_input(GPIO_NR_PALMTX_SD_READONLY);
+	if (err)
+		goto err5;
 
 	printk(KERN_DEBUG "%s: irq registered\n", __func__);
 
 	return 0;
 
-ro_err:
+err5:
+	gpio_free(GPIO_NR_PALMTX_SD_READONLY);
+err4:
 	gpio_free(GPIO_NR_PALMTX_SD_POWER);
-pwr_err:
-	free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+err3:
+	free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
+err2:
+	gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
+err:
 	return err;
 }
 
@@ -128,7 +189,8 @@ static void palmtx_mci_exit(struct device *dev, void *data)
 {
 	gpio_free(GPIO_NR_PALMTX_SD_READONLY);
 	gpio_free(GPIO_NR_PALMTX_SD_POWER);
-	free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+	free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
+	gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
 }
 
 static void palmtx_mci_power(struct device *dev, unsigned int vdd)
@@ -167,7 +229,6 @@ static unsigned int palmtx_matrix_keys[] = {
 
 	KEY(3, 0, KEY_RIGHT),
 	KEY(3, 2, KEY_LEFT),
-
 };
 
 static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
@@ -209,11 +270,19 @@ static int palmtx_backlight_init(struct device *dev)
 	ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
 	if (ret)
 		goto err;
+	ret = gpio_direction_output(GPIO_NR_PALMTX_BL_POWER, 0);
+	if (ret)
+		goto err2;
 	ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
 	if (ret)
 		goto err2;
+	ret = gpio_direction_output(GPIO_NR_PALMTX_LCD_POWER, 0);
+	if (ret)
+		goto err3;
 
 	return 0;
+err3:
+	gpio_free(GPIO_NR_PALMTX_LCD_POWER);
 err2:
 	gpio_free(GPIO_NR_PALMTX_BL_POWER);
 err:
@@ -254,6 +323,24 @@ static struct platform_device palmtx_backlight = {
 /******************************************************************************
  * IrDA
  ******************************************************************************/
+static int palmtx_irda_startup(struct device *dev)
+{
+	int err;
+	err = gpio_request(GPIO_NR_PALMTX_IR_DISABLE, "IR DISABLE");
+	if (err)
+		goto err;
+	err = gpio_direction_output(GPIO_NR_PALMTX_IR_DISABLE, 1);
+	if (err)
+		gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
+err:
+	return err;
+}
+
+static void palmtx_irda_shutdown(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
+}
+
 static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
 {
 	gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
@@ -261,6 +348,8 @@ static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
 }
 
 static struct pxaficp_platform_data palmtx_ficp_platform_data = {
+	.startup		= palmtx_irda_startup,
+	.shutdown		= palmtx_irda_shutdown,
 	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
 	.transceiver_mode	= palmtx_irda_transceiver_mode,
 };
@@ -268,17 +357,11 @@ static struct pxaficp_platform_data palmtx_ficp_platform_data = {
 /******************************************************************************
  * UDC
  ******************************************************************************/
-static void palmtx_udc_command(int cmd)
-{
-	gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd);
-	udelay(50);
-	gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd);
-}
-
 static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
 	.gpio_vbus		= GPIO_NR_PALMTX_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
-	.udc_command		= palmtx_udc_command,
+	.gpio_pullup		= GPIO_NR_PALMTX_USB_POWER,
+	.gpio_pullup_inverted	= 0,
 };
 
 /******************************************************************************
@@ -290,17 +373,16 @@ static int power_supply_init(struct device *dev)
 
 	ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
 	if (ret)
-		goto err_cs_ac;
-
-	ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB");
+		goto err1;
+	ret = gpio_direction_input(GPIO_NR_PALMTX_POWER_DETECT);
 	if (ret)
-		goto err_cs_usb;
+		goto err2;
 
 	return 0;
 
-err_cs_usb:
+err2:
 	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
-err_cs_ac:
+err1:
 	return ret;
 }
 
@@ -309,14 +391,8 @@ static int palmtx_is_ac_online(void)
 	return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
 }
 
-static int palmtx_is_usb_online(void)
-{
-	return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N);
-}
-
 static void power_supply_exit(struct device *dev)
 {
-	gpio_free(GPIO_NR_PALMTX_USB_DETECT_N);
 	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
 }
 
@@ -327,7 +403,6 @@ static char *palmtx_supplicants[] = {
 static struct pda_power_pdata power_supply_info = {
 	.init            = power_supply_init,
 	.is_ac_online    = palmtx_is_ac_online,
-	.is_usb_online   = palmtx_is_usb_online,
 	.exit            = power_supply_exit,
 	.supplied_to     = palmtx_supplicants,
 	.num_supplicants = ARRAY_SIZE(palmtx_supplicants),
@@ -410,12 +485,23 @@ static void __init palmtx_map_io(void)
 	iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
 }
 
+/* setup udc GPIOs initial state */
+static void __init palmtx_udc_init(void)
+{
+	if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) {
+		gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1);
+		gpio_free(GPIO_NR_PALMTX_USB_POWER);
+	}
+}
+
+
 static void __init palmtx_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
 
 	set_pxa_fb_info(&palmtx_lcd_screen);
 	pxa_set_mci_info(&palmtx_mci_platform_data);
+	palmtx_udc_init();
 	pxa_set_udc_info(&palmtx_udc_info);
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&palmtx_ficp_platform_data);
-- 
cgit v1.2.3


From b93c35ff39d19f20c47c06c206986afefecc777a Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 1 Dec 2008 13:13:57 -0800
Subject: spi: fix spi_s3c24xx_gpio num_chipselect

The spi master driver must have num_chipselect set to allow the bus to
initialise.  Pass this through the platform data.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/mach-s3c2410/include/mach/spi-gpio.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
index 3fe8be9ca11..980a099e209 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
@@ -18,6 +18,7 @@ struct s3c2410_spigpio_info {
 	unsigned long		 pin_mosi;
 	unsigned long		 pin_miso;
 
+	int			 num_chipselect;
 	int			 bus_num;
 
 	void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);
-- 
cgit v1.2.3


From fb6f552930e52699c8ac452c5a79ec3e97e6fc73 Mon Sep 17 00:00:00 2001
From: Ronen Shitrit <rshitrit@marvell.com>
Date: Wed, 17 Sep 2008 10:08:05 +0300
Subject: [ARM] Orion: add the option to support different ehci phy
 initialization

The Orion ehci driver serves the Orion, kirkwood and DD Soc families.
Since each of those integrate a different USB phy we should have the
ability to use few initialization sequences or to leave the boot loader
phy settings as is.

Signed-off-by: Ronen Shitrit <rshitrit@marvell.com>
---
 arch/arm/mach-kirkwood/common.c               | 1 +
 arch/arm/mach-mv78xx0/common.c                | 1 +
 arch/arm/mach-orion5x/common.c                | 1 +
 arch/arm/plat-orion/include/plat/ehci-orion.h | 8 ++++++++
 4 files changed, 11 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 0bb1fbd84cc..b5c684d96e4 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -57,6 +57,7 @@ void __init kirkwood_map_io(void)
  ****************************************************************************/
 static struct orion_ehci_data kirkwood_ehci_data = {
 	.dram		= &kirkwood_mbus_dram_info,
+	.phy_version	= EHCI_PHY_NA,
 };
 
 static u64 ehci_dmamask = 0xffffffffUL;
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 238a2f8c2d5..b0e4e0d8f50 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -167,6 +167,7 @@ void __init mv78xx0_map_io(void)
  ****************************************************************************/
 static struct orion_ehci_data mv78xx0_ehci_data = {
 	.dram		= &mv78xx0_mbus_dram_info,
+	.phy_version	= EHCI_PHY_NA,
 };
 
 static u64 ehci_dmamask = 0xffffffffUL;
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 437065c25c9..0a623379789 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -72,6 +72,7 @@ void __init orion5x_map_io(void)
  ****************************************************************************/
 static struct orion_ehci_data orion5x_ehci_data = {
 	.dram		= &orion5x_mbus_dram_info,
+	.phy_version	= EHCI_PHY_ORION,
 };
 
 static u64 ehci_dmamask = 0xffffffffUL;
diff --git a/arch/arm/plat-orion/include/plat/ehci-orion.h b/arch/arm/plat-orion/include/plat/ehci-orion.h
index 64343051095..4ec668e7746 100644
--- a/arch/arm/plat-orion/include/plat/ehci-orion.h
+++ b/arch/arm/plat-orion/include/plat/ehci-orion.h
@@ -11,8 +11,16 @@
 
 #include <linux/mbus.h>
 
+enum orion_ehci_phy_ver {
+	EHCI_PHY_ORION,
+	EHCI_PHY_DD,
+	EHCI_PHY_KW,
+	EHCI_PHY_NA,
+};
+
 struct orion_ehci_data {
 	struct mbus_dram_target_info	*dram;
+	enum orion_ehci_phy_ver phy_version;
 };
 
 
-- 
cgit v1.2.3


From a93f44c1751ef1afddd4b76058fb3a2f55fe774c Mon Sep 17 00:00:00 2001
From: Matt Palmer <mpalmer@hezmatt.org>
Date: Sun, 19 Oct 2008 08:15:09 +1100
Subject: [ARM] DNS323: Read MAC address from flash

Based on similar code from the tsx09 series of machines, just rips the MAC
address out of flash and stuffs it into the NIC. Tested on a DNS323 rev B1.
It's possible (though unlikely) that an A1 will have the MAC in a different
location in flash.

Signed-off-by: Matt Palmer <mpalmer@hezmatt.org>
---
 arch/arm/mach-orion5x/dns323-setup.c | 111 ++++++++++++++++++++++++++++++-----
 1 file changed, 95 insertions(+), 16 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 3e66098340a..4053bd35476 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -74,14 +74,6 @@ static int __init dns323_pci_init(void)
 
 subsys_initcall(dns323_pci_init);
 
-/****************************************************************************
- * Ethernet
- */
-
-static struct mv643xx_eth_platform_data dns323_eth_data = {
-	.phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
 /****************************************************************************
  * 8MiB NOR flash (Spansion S29GL064M90TFIR4)
  *
@@ -142,6 +134,90 @@ static struct platform_device dns323_nor_flash = {
 	.num_resources	= 1,
 };
 
+/****************************************************************************
+ * Ethernet
+ */
+
+static struct mv643xx_eth_platform_data dns323_eth_data = {
+	.phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+/* dns323_parse_hex_*() taken from tsx09-common.c; should a common copy of these
+ * functions be kept somewhere?
+ */
+static int __init dns323_parse_hex_nibble(char n)
+{
+	if (n >= '0' && n <= '9')
+		return n - '0';
+
+	if (n >= 'A' && n <= 'F')
+		return n - 'A' + 10;
+
+	if (n >= 'a' && n <= 'f')
+		return n - 'a' + 10;
+
+	return -1;
+}
+
+static int __init dns323_parse_hex_byte(const char *b)
+{
+	int hi;
+	int lo;
+
+	hi = dns323_parse_hex_nibble(b[0]);
+	lo = dns323_parse_hex_nibble(b[1]);
+
+	if (hi < 0 || lo < 0)
+		return -1;
+
+	return (hi << 4) | lo;
+}
+
+static int __init dns323_read_mac_addr(void)
+{
+	u_int8_t addr[6];
+	int i;
+	char *mac_page;
+
+	/* MAC address is stored as a regular ol' string in /dev/mtdblock4
+	 * (0x007d0000-0x00800000) starting at offset 196480 (0x2ff80).
+	 */
+	mac_page = ioremap(DNS323_NOR_BOOT_BASE + 0x7d0000 + 196480, 1024);
+	if (!mac_page)
+		return -ENOMEM;
+
+	/* Sanity check the string we're looking at */
+	for (i = 0; i < 5; i++) {
+		if (*(mac_page + (i * 3) + 2) != ':') {
+			goto error_fail;
+		}
+	}
+
+	for (i = 0; i < 6; i++)	{
+		int byte;
+
+		byte = dns323_parse_hex_byte(mac_page + (i * 3));
+		if (byte < 0) {
+			goto error_fail;
+		}
+
+		addr[i] = byte;
+	}
+
+	iounmap(mac_page);
+	printk("DNS323: Found ethernet MAC address: ");
+	for (i = 0; i < 6; i++)
+		printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
+
+	memcpy(dns323_eth_data.mac_addr, addr, 6);
+
+	return 0;
+
+error_fail:
+	iounmap(mac_page);
+	return -EINVAL;
+}
+
 /****************************************************************************
  * GPIO LEDs (simple - doesn't use hardware blinking support)
  */
@@ -267,14 +343,6 @@ static void __init dns323_init(void)
 	orion5x_mpp_conf(dns323_mpp_modes);
 	writel(0, MPP_DEV_CTRL);		/* DEV_D[31:16] */
 
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&dns323_eth_data);
-	orion5x_i2c_init();
-	orion5x_uart0_init();
-
 	/* setup flash mapping
 	 * CS3 holds a 8 MB Spansion S29GL064M90TFIR4
 	 */
@@ -288,6 +356,17 @@ static void __init dns323_init(void)
 	i2c_register_board_info(0, dns323_i2c_devices,
 				ARRAY_SIZE(dns323_i2c_devices));
 
+	/*
+	 * Configure peripherals.
+	 */
+	if (dns323_read_mac_addr() < 0)
+		printk("DNS323: Failed to read MAC address\n");
+
+	orion5x_ehci0_init();
+	orion5x_eth_init(&dns323_eth_data);
+	orion5x_i2c_init();
+	orion5x_uart0_init();
+
 	/* register dns323 specific power-off method */
 	if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 	    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
-- 
cgit v1.2.3


From f93e4159b14c5edbaae9916d42ad685aa2f927d1 Mon Sep 17 00:00:00 2001
From: Matt Palmer <mpalmer@hezmatt.org>
Date: Wed, 22 Oct 2008 10:16:36 +0200
Subject: [ARM] DNS323: Initialise 88F5182 correctly

The 88F5182 found in the DNS-323 rev B1 (and some other devices, such
as the CH3SNAS) require different initialisation of the SATA
controller and MPP registers.

Tested on a DNS-323 rev B1.

Signed-off-by: Matt Palmer <mpalmer@hezmatt.org>
---
 arch/arm/mach-orion5x/dns323-setup.c | 65 +++++++++++++++++++++++++++++++++---
 1 file changed, 61 insertions(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 4053bd35476..0722d6510df 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -21,6 +21,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/i2c.h>
+#include <linux/ata_platform.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
@@ -64,9 +65,21 @@ static struct hw_pci dns323_pci __initdata = {
 	.map_irq	= dns323_pci_map_irq,
 };
 
+static int __init dns323_dev_id(void)
+{
+	u32 dev, rev;
+
+	orion5x_pcie_id(&dev, &rev);
+
+	return dev;
+}
+
 static int __init dns323_pci_init(void)
 {
-	if (machine_is_dns323())
+	/* The 5182 doesn't really use it's PCI bus, and initialising PCI
+	 * gets in the way of initialising the SATA controller.
+	 */
+	if (machine_is_dns323() && dns323_dev_id() != MV88F5182_DEV_ID)
 		pci_common_init(&dns323_pci);
 
 	return 0;
@@ -283,10 +296,17 @@ static struct platform_device dns323_button_device = {
 	},
 };
 
+/*****************************************************************************
+ * SATA
+ */
+static struct mv_sata_platform_data dns323_sata_data = {
+       .n_ports        = 2,
+};
+
 /****************************************************************************
  * General Setup
  */
-static struct orion5x_mpp_mode dns323_mpp_modes[] __initdata = {
+static struct orion5x_mpp_mode dns323_mv88f5181_mpp_modes[] __initdata = {
 	{  0, MPP_PCIE_RST_OUTn },
 	{  1, MPP_GPIO },		/* right amber LED (sata ch0) */
 	{  2, MPP_GPIO },		/* left amber LED (sata ch1) */
@@ -310,6 +330,30 @@ static struct orion5x_mpp_mode dns323_mpp_modes[] __initdata = {
 	{ -1 },
 };
 
+static struct orion5x_mpp_mode dns323_mv88f5182_mpp_modes[] __initdata = {
+	{  0, MPP_UNUSED },
+	{  1, MPP_GPIO },		/* right amber LED (sata ch0) */
+	{  2, MPP_GPIO },		/* left amber LED (sata ch1) */
+	{  3, MPP_UNUSED },
+	{  4, MPP_GPIO },		/* power button LED */
+	{  5, MPP_GPIO },		/* power button LED */
+	{  6, MPP_GPIO },		/* GMT G751-2f overtemp */
+	{  7, MPP_GPIO },		/* M41T80 nIRQ/OUT/SQW */
+	{  8, MPP_GPIO },		/* triggers power off */
+	{  9, MPP_GPIO },		/* power button switch */
+	{ 10, MPP_GPIO },		/* reset button switch */
+	{ 11, MPP_UNUSED },
+	{ 12, MPP_SATA_LED },
+	{ 13, MPP_SATA_LED },
+	{ 14, MPP_SATA_LED },
+	{ 15, MPP_SATA_LED },
+	{ 16, MPP_UNUSED },
+	{ 17, MPP_UNUSED },
+	{ 18, MPP_UNUSED },
+	{ 19, MPP_UNUSED },
+	{ -1 },
+};
+
 /*
  * On the DNS-323 the following devices are attached via I2C:
  *
@@ -340,8 +384,15 @@ static void __init dns323_init(void)
 	/* Setup basic Orion functions. Need to be called early. */
 	orion5x_init();
 
-	orion5x_mpp_conf(dns323_mpp_modes);
-	writel(0, MPP_DEV_CTRL);		/* DEV_D[31:16] */
+	/* Just to be tricky, the 5182 has a completely different
+	 * set of MPP modes to the 5181.
+	 */
+	if (dns323_dev_id() == MV88F5182_DEV_ID)
+		orion5x_mpp_conf(dns323_mv88f5182_mpp_modes);
+	else {
+		orion5x_mpp_conf(dns323_mv88f5181_mpp_modes);
+		writel(0, MPP_DEV_CTRL);		/* DEV_D[31:16] */
+	}
 
 	/* setup flash mapping
 	 * CS3 holds a 8 MB Spansion S29GL064M90TFIR4
@@ -367,6 +418,12 @@ static void __init dns323_init(void)
 	orion5x_i2c_init();
 	orion5x_uart0_init();
 
+	/* The 5182 has it's SATA controller on-chip, and needs it's own little
+	 * init routine.
+	 */
+	if (dns323_dev_id() == MV88F5182_DEV_ID)
+		orion5x_sata_init(&dns323_sata_data);
+
 	/* register dns323 specific power-off method */
 	if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 	    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
-- 
cgit v1.2.3


From d15fb9efe91b7198f2234783ab1d496ab1ee7b58 Mon Sep 17 00:00:00 2001
From: Ronen Shitrit <rshitrit@marvell.com>
Date: Sun, 19 Oct 2008 23:10:14 +0200
Subject: [ARM] Kirkwood: allow instantiating the second ethernet port

The 88f6192 and 88f6281 Kirkwood SoCs support two ethernet ports.
Add the platform glue that will allow board support files to
instantiate the second ethernet port.

Signed-off-by: Ronen Shitrit <rshitrit@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/common.c            | 58 ++++++++++++++++++++++++++++++
 arch/arm/mach-kirkwood/common.h            |  1 +
 arch/arm/mach-kirkwood/include/mach/irqs.h |  1 +
 3 files changed, 60 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index b5c684d96e4..7b8ef97fb50 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -153,6 +153,64 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 }
 
 
+/*****************************************************************************
+ * GE01
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data kirkwood_ge01_shared_data = {
+	.dram		= &kirkwood_mbus_dram_info,
+	.shared_smi	= &kirkwood_ge00_shared,
+};
+
+static struct resource kirkwood_ge01_shared_resources[] = {
+	{
+		.name	= "ge01 base",
+		.start	= GE01_PHYS_BASE + 0x2000,
+		.end	= GE01_PHYS_BASE + 0x3fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "ge01 err irq",
+		.start	= IRQ_KIRKWOOD_GE01_ERR,
+		.end	= IRQ_KIRKWOOD_GE01_ERR,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kirkwood_ge01_shared = {
+	.name		= MV643XX_ETH_SHARED_NAME,
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &kirkwood_ge01_shared_data,
+	},
+	.num_resources	= ARRAY_SIZE(kirkwood_ge01_shared_resources),
+	.resource	= kirkwood_ge01_shared_resources,
+};
+
+static struct resource kirkwood_ge01_resources[] = {
+	{
+		.name	= "ge01 irq",
+		.start	= IRQ_KIRKWOOD_GE01_SUM,
+		.end	= IRQ_KIRKWOOD_GE01_SUM,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kirkwood_ge01 = {
+	.name		= MV643XX_ETH_NAME,
+	.id		= 1,
+	.num_resources	= 1,
+	.resource	= kirkwood_ge01_resources,
+};
+
+void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
+{
+	eth_data->shared = &kirkwood_ge01_shared;
+	kirkwood_ge01.dev.platform_data = eth_data;
+
+	platform_device_register(&kirkwood_ge01_shared);
+	platform_device_register(&kirkwood_ge01);
+}
+
+
 /*****************************************************************************
  * Ethernet switch
  ****************************************************************************/
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 5774632a67e..fe367c18e72 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -30,6 +30,7 @@ void kirkwood_pcie_id(u32 *dev, u32 *rev);
 
 void kirkwood_ehci_init(void);
 void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
+void kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data);
 void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq);
 void kirkwood_pcie_init(void);
 void kirkwood_rtc_init(void);
diff --git a/arch/arm/mach-kirkwood/include/mach/irqs.h b/arch/arm/mach-kirkwood/include/mach/irqs.h
index ffab89f21c1..3a964bb1497 100644
--- a/arch/arm/mach-kirkwood/include/mach/irqs.h
+++ b/arch/arm/mach-kirkwood/include/mach/irqs.h
@@ -51,6 +51,7 @@
 #define IRQ_KIRKWOOD_GPIO_HIGH_8_15	40
 #define IRQ_KIRKWOOD_GPIO_HIGH_16_23	41
 #define IRQ_KIRKWOOD_GE00_ERR	46
+#define IRQ_KIRKWOOD_GE01_ERR	47
 
 /*
  * KIRKWOOD General Purpose Pins
-- 
cgit v1.2.3


From 37787e449b39202afae13b6c47505ae9e977cae3 Mon Sep 17 00:00:00 2001
From: Ronen Shitrit <rshitrit@marvell.com>
Date: Sun, 19 Oct 2008 23:19:07 +0200
Subject: [ARM] Kirkwood: properly handle the WAN port on newer RD88F6281
 boards

On newer versions of the RD88F6281 board, the WAN port is connected to
its own ethernet port on the CPU, via a separate PHY, whereas on older
versions of the board, it is connected to one of the PHYs in the
ethernet switch.  In the RD8F6281 setup code, detect which version of
the board we are running on, and instantiate the ethernet ports and
switch driver accordingly.

Signed-off-by: Ronen Shitrit <rshitrit@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/rd88f6281-setup.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 175054abd63..9a0e905d10c 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -80,24 +80,38 @@ static struct dsa_platform_data rd88f6281_switch_data = {
 	.port_names[1]	= "lan2",
 	.port_names[2]	= "lan3",
 	.port_names[3]	= "lan4",
-	.port_names[4]	= "wan",
 	.port_names[5]	= "cpu",
 };
 
+static struct mv643xx_eth_platform_data rd88f6281_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
+};
+
 static struct mv_sata_platform_data rd88f6281_sata_data = {
 	.n_ports	= 2,
 };
 
 static void __init rd88f6281_init(void)
 {
+	u32 dev, rev;
+
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
 	kirkwood_init();
 
 	kirkwood_ehci_init();
+
 	kirkwood_ge00_init(&rd88f6281_ge00_data);
+	kirkwood_pcie_id(&dev, &rev);
+	if (rev == MV88F6281_REV_A0) {
+		rd88f6281_switch_data.sw_addr = 10;
+		kirkwood_ge01_init(&rd88f6281_ge01_data);
+	} else {
+		rd88f6281_switch_data.port_names[4] = "wan";
+	}
 	kirkwood_ge00_switch_init(&rd88f6281_switch_data, NO_IRQ);
+
 	kirkwood_rtc_init();
 	kirkwood_sata_init(&rd88f6281_sata_data);
 	kirkwood_uart0_init();
-- 
cgit v1.2.3


From b71b9effb5c6aad49682f963291b06018b44ed38 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Thu, 4 Dec 2008 01:03:57 -0500
Subject: [ARM] Feroceon: pass proper -mtune argument to gcc

Compilation for the Feroceon core should use -mtune=marvell-f.  This is
available in Code Sourcery's 2008Q3 release at the moment. Otherwise
fall back to -mtune-=xscale.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/Makefile | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index bd6e28115eb..384f6b16bfd 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -76,6 +76,7 @@ tune-$(CONFIG_CPU_SA110)	:=-mtune=strongarm110
 tune-$(CONFIG_CPU_SA1100)	:=-mtune=strongarm1100
 tune-$(CONFIG_CPU_XSCALE)	:=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
 tune-$(CONFIG_CPU_XSC3)		:=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
+tune-$(CONFIG_CPU_FEROCEON)	:=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
 tune-$(CONFIG_CPU_V6)		:=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
 
 ifeq ($(CONFIG_AEABI),y)
-- 
cgit v1.2.3


From 58c2467355ed3154a12ee49d8f8236547145c9d3 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Thu, 4 Dec 2008 00:22:11 -0500
Subject: [ARM] Kirkwood: update defconfig

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/configs/kirkwood_defconfig | 329 ++++++++++++++++++++++++++----------
 1 file changed, 239 insertions(+), 90 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index e3357ba10f1..ab8b1e0d0da 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -1,11 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Sun Jun 22 15:51:25 2008
+# Linux kernel version: 2.6.28-rc7
+# Thu Dec  4 15:27:39 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
@@ -22,8 +22,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -49,14 +48,17 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
+# CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -73,9 +75,12 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
@@ -85,8 +90,7 @@ CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -97,12 +101,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -117,6 +122,7 @@ CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System Type
@@ -128,7 +134,6 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
@@ -158,7 +163,7 @@ CONFIG_ARCH_KIRKWOOD=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
 
 #
 # Marvell Kirkwood Implementations
@@ -199,6 +204,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 CONFIG_OUTER_CACHE=y
 CONFIG_CACHE_FEROCEON_L2=y
+# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
 
 #
 # Bus support
@@ -217,25 +223,30 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -247,6 +258,11 @@ CONFIG_CMDLINE=""
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
 #
 # Floating point emulation
 #
@@ -260,6 +276,8 @@ CONFIG_CMDLINE=""
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
@@ -268,10 +286,6 @@ CONFIG_BINFMT_ELF=y
 #
 # CONFIG_PM is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -322,6 +336,15 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+CONFIG_NET_DSA=y
+# CONFIG_NET_DSA_TAG_DSA is not set
+CONFIG_NET_DSA_TAG_EDSA=y
+# CONFIG_NET_DSA_TAG_TRAILER is not set
+CONFIG_NET_DSA_MV88E6XXX=y
+# CONFIG_NET_DSA_MV88E6060 is not set
+# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
+# CONFIG_NET_DSA_MV88E6131 is not set
+CONFIG_NET_DSA_MV88E6123_61_65=y
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -343,12 +366,12 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -365,6 +388,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -453,7 +478,7 @@ CONFIG_M25PXX_USE_FAST_READ=y
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
@@ -561,6 +586,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -619,7 +645,6 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
 # CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -627,11 +652,14 @@ CONFIG_SATA_MV=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -639,7 +667,23 @@ CONFIG_NETDEVICES=y
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
@@ -650,12 +694,16 @@ CONFIG_MII=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -676,14 +724,12 @@ CONFIG_NET_PCI=y
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
-CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -699,6 +745,8 @@ CONFIG_E1000_NAPI=y
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -765,7 +813,11 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 # Character devices
 #
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
@@ -775,7 +827,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -800,44 +852,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -864,20 +936,26 @@ CONFIG_SPI_ORION=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
 
 #
 # Multimedia devices
@@ -910,8 +988,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# Sound
+# Console display driver support
 #
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -922,9 +1002,36 @@ CONFIG_HID=y
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_BRIGHT=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DELL=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -940,8 +1047,9 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -956,20 +1064,23 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
-CONFIG_USB_PRINTER=y
+CONFIG_USB_PRINTER=m
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -992,7 +1103,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -1005,7 +1115,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1023,8 +1133,12 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 # CONFIG_LEDS_CLASS is not set
 
@@ -1038,6 +1152,8 @@ CONFIG_NEW_LEDS=y
 # CONFIG_LEDS_TRIGGERS is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
 
 #
@@ -1056,7 +1172,6 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_MAX6900 is not set
-CONFIG_RTC_DRV_MV=y
 # CONFIG_RTC_DRV_RS5C372 is not set
 # CONFIG_RTC_DRV_ISL1208 is not set
 # CONFIG_RTC_DRV_X1205 is not set
@@ -1064,29 +1179,39 @@ CONFIG_RTC_DRV_MV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_MV=y
 CONFIG_DMADEVICES=y
 
 #
@@ -1099,6 +1224,8 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
 
 #
@@ -1109,11 +1236,12 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=y
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
@@ -1131,7 +1259,7 @@ CONFIG_INOTIFY_USER=y
 #
 # CD-ROM/DVD Filesystems
 #
-CONFIG_ISO9660_FS=y
+CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 # CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
@@ -1140,9 +1268,9 @@ CONFIG_UDF_NLS=y
 #
 # DOS/FAT/NT Filesystems
 #
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
@@ -1152,6 +1280,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1182,6 +1311,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1192,13 +1322,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1210,24 +1340,8 @@ CONFIG_SUNRPC=y
 #
 # Partition Types
 #
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
+# CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1284,11 +1398,14 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1300,21 +1417,40 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1326,6 +1462,7 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_ASYNC_CORE=y
 CONFIG_CRYPTO=y
@@ -1333,8 +1470,12 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_RNG=m
 CONFIG_CRYPTO_MANAGER=m
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1373,6 +1514,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1403,6 +1548,11 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
@@ -1410,10 +1560,9 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
-- 
cgit v1.2.3