From 0cdc8b921d68817b687755b4f6ae20cd8ff1d026 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Fri, 2 Sep 2011 22:26:55 -0400 Subject: ARM: switch from NO_MACH_MEMORY_H to NEED_MACH_MEMORY_H Given that we want the default to not have any and given that there are now fewer cases where it is still provided than the cases where it is not at this point, this makes sense to invert the logic and just identify the exception cases. The word "need" instead of "have" was chosen to construct the config symbol so not to suggest that having a mach/memory.h file is actually a feature that one should aim for. Signed-off-by: Nicolas Pitre --- arch/arm/Kconfig | 61 ++++++++++++++++++++------------------------------------ 1 file changed, 22 insertions(+), 39 deletions(-) (limited to 'arch/arm/Kconfig') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 81148f41535..b7f7510658d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -211,14 +211,16 @@ config ARM_PATCH_PHYS_VIRT this feature (eg, building a kernel for a single machine) and you need to shrink the kernel to the minimal size. -config NO_MACH_MEMORY_H +config NEED_MACH_MEMORY_H bool help - Select this when mach/memory.h is removed. + Select this when mach/memory.h is required to provide special + definitions for this platform. The need for mach/memory.h should + be avoided when possible. config PHYS_OFFSET hex "Physical address of main memory" - depends on !ARM_PATCH_PHYS_VIRT && NO_MACH_MEMORY_H + depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H help Please provide the physical address corresponding to the location of main memory in your system. @@ -254,6 +256,7 @@ config ARCH_INTEGRATOR select GENERIC_CLOCKEVENTS select PLAT_VERSATILE select PLAT_VERSATILE_FPGA_IRQ + select NEED_MACH_MEMORY_H help Support for ARM's Integrator platform. @@ -269,6 +272,7 @@ config ARCH_REALVIEW select PLAT_VERSATILE_CLCD select ARM_TIMER_SP804 select GPIO_PL061 if GPIOLIB + select NEED_MACH_MEMORY_H help This enables support for ARM Ltd RealView boards. @@ -285,7 +289,6 @@ config ARCH_VERSATILE select PLAT_VERSATILE_CLCD select PLAT_VERSATILE_FPGA_IRQ select ARM_TIMER_SP804 - select NO_MACH_MEMORY_H help This enables support for ARM Ltd Versatile board. @@ -302,7 +305,6 @@ config ARCH_VEXPRESS select ICST select PLAT_VERSATILE select PLAT_VERSATILE_CLCD - select NO_MACH_MEMORY_H help This enables support for the ARM Ltd Versatile Express boards. @@ -324,7 +326,6 @@ config ARCH_BCMRING select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB - select NO_MACH_MEMORY_H help Support for Broadcom's BCMRing platform. @@ -332,6 +333,7 @@ config ARCH_CLPS711X bool "Cirrus Logic CLPS711x/EP721x-based" select CPU_ARM720T select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help Support for Cirrus Logic 711x/721x based boards. @@ -342,7 +344,6 @@ config ARCH_CNS3XXX select ARM_GIC select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI - select NO_MACH_MEMORY_H help Support for Cavium Networks CNS3XXX platform. @@ -351,7 +352,6 @@ config ARCH_GEMINI select CPU_FA526 select ARCH_REQUIRE_GPIOLIB select ARCH_USES_GETTIMEOFFSET - select NO_MACH_MEMORY_H help Support for the Cortina Systems Gemini family SoCs @@ -365,7 +365,6 @@ config ARCH_PRIMA2 select GENERIC_IRQ_CHIP select USE_OF select ZONE_DMA - select NO_MACH_MEMORY_H help Support for CSR SiRFSoC ARM Cortex A9 Platform @@ -375,6 +374,7 @@ config ARCH_EBSA110 select ISA select NO_IOPORT select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help This is an evaluation board for the StrongARM processor available from Digital. It has limited hardware on-board, including an @@ -390,6 +390,7 @@ config ARCH_EP93XX select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_USES_GETTIMEOFFSET + select NEED_MEMORY_H help This enables support for the Cirrus EP93xx series of CPUs. @@ -398,6 +399,7 @@ config ARCH_FOOTBRIDGE select CPU_SA110 select FOOTBRIDGE select GENERIC_CLOCKEVENTS + select NEED_MACH_MEMORY_H help Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. @@ -410,7 +412,6 @@ config ARCH_MXC select CLKSRC_MMIO select GENERIC_IRQ_CHIP select HAVE_SCHED_CLOCK - select NO_MACH_MEMORY_H help Support for Freescale MXC/iMX-based family of processors @@ -420,7 +421,6 @@ config ARCH_MXS select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select CLKSRC_MMIO - select NO_MACH_MEMORY_H help Support for Freescale MXS-based family of processors @@ -430,7 +430,6 @@ config ARCH_NETX select CPU_ARM926T select ARM_VIC select GENERIC_CLOCKEVENTS - select NO_MACH_MEMORY_H help This enables support for systems based on the Hilscher NetX Soc @@ -439,7 +438,6 @@ config ARCH_H720X select CPU_ARM720T select ISA_DMA_API select ARCH_USES_GETTIMEOFFSET - select NO_MACH_MEMORY_H help This enables support for systems based on the Hynix HMS720x @@ -451,6 +449,7 @@ config ARCH_IOP13XX select PCI select ARCH_SUPPORTS_MSI select VMSPLIT_1G + select NEED_MACH_MEMORY_H help Support for Intel's IOP13XX (XScale) family of processors. @@ -461,7 +460,6 @@ config ARCH_IOP32X select PLAT_IOP select PCI select ARCH_REQUIRE_GPIOLIB - select NO_MACH_MEMORY_H help Support for Intel's 80219 and IOP32X (XScale) family of processors. @@ -473,7 +471,6 @@ config ARCH_IOP33X select PLAT_IOP select PCI select ARCH_REQUIRE_GPIOLIB - select NO_MACH_MEMORY_H help Support for Intel's IOP33X (XScale) family of processors. @@ -483,6 +480,7 @@ config ARCH_IXP23XX select CPU_XSC3 select PCI select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help Support for Intel's IXP23xx (XScale) family of processors. @@ -492,6 +490,7 @@ config ARCH_IXP2000 select CPU_XSCALE select PCI select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help Support for Intel's IXP2400/2800 (XScale) family of processors. @@ -505,7 +504,6 @@ config ARCH_IXP4XX select HAVE_SCHED_CLOCK select MIGHT_HAVE_PCI select DMABOUNCE if PCI - select NO_MACH_MEMORY_H help Support for Intel's IXP4XX (XScale) family of processors. @@ -516,7 +514,6 @@ config ARCH_DOVE select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS select PLAT_ORION - select NO_MACH_MEMORY_H help Support for the Marvell Dove SoC 88AP510 @@ -527,7 +524,6 @@ config ARCH_KIRKWOOD select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS select PLAT_ORION - select NO_MACH_MEMORY_H help Support for the following Marvell Kirkwood series SoCs: 88F6180, 88F6192 and 88F6281. @@ -543,7 +539,6 @@ config ARCH_LPC32XX select CLKDEV_LOOKUP select GENERIC_TIME select GENERIC_CLOCKEVENTS - select NO_MACH_MEMORY_H help Support for the NXP LPC32XX family of processors @@ -554,7 +549,6 @@ config ARCH_MV78XX0 select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS select PLAT_ORION - select NO_MACH_MEMORY_H help Support for the following Marvell MV78xx0 series SoCs: MV781x0, MV782x0. @@ -567,7 +561,6 @@ config ARCH_ORION5X select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS select PLAT_ORION - select NO_MACH_MEMORY_H help Support for the following Marvell Orion 5x series SoCs: Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182), @@ -583,7 +576,6 @@ config ARCH_MMP select TICK_ONESHOT select PLAT_PXA select SPARSE_IRQ - select NO_MACH_MEMORY_H help Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line. @@ -592,6 +584,7 @@ config ARCH_KS8695 select CPU_ARM922T select ARCH_REQUIRE_GPIOLIB select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based System-on-Chip devices. @@ -603,7 +596,6 @@ config ARCH_W90X900 select CLKDEV_LOOKUP select CLKSRC_MMIO select GENERIC_CLOCKEVENTS - select NO_MACH_MEMORY_H help Support for Nuvoton (Winbond logic dept.) ARM9 processor, At present, the w90x900 has been renamed nuc900, regarding @@ -617,7 +609,6 @@ config ARCH_NUC93X bool "Nuvoton NUC93X CPU" select CPU_ARM926T select CLKDEV_LOOKUP - select NO_MACH_MEMORY_H help Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a low-power and high performance MPEG-4/JPEG multimedia controller chip. @@ -632,7 +623,6 @@ config ARCH_TEGRA select HAVE_CLK select HAVE_SCHED_CLOCK select ARCH_HAS_CPUFREQ - select NO_MACH_MEMORY_H help This enables support for NVIDIA Tegra based systems (Tegra APX, Tegra 6xx and Tegra 2 series). @@ -642,7 +632,6 @@ config ARCH_PNX4008 select CPU_ARM926T select CLKDEV_LOOKUP select ARCH_USES_GETTIMEOFFSET - select NO_MACH_MEMORY_H help This enables support for Philips PNX4008 mobile platform. @@ -661,7 +650,6 @@ config ARCH_PXA select SPARSE_IRQ select AUTO_ZRELADDR select MULTI_IRQ_HANDLER - select NO_MACH_MEMORY_H help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. @@ -671,7 +659,6 @@ config ARCH_MSM select GENERIC_CLOCKEVENTS select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP - select NO_MACH_MEMORY_H help Support for Qualcomm MSM/QSD based systems. This runs on the apps processor of the MSM/QSD and depends on a shared memory @@ -689,6 +676,7 @@ config ARCH_SHMOBILE select SPARSE_IRQ select MULTI_IRQ_HANDLER select PM_GENERIC_DOMAINS if PM + select NEED_MACH_MEMORY_H help Support for Renesas's SH-Mobile and R-Mobile ARM platforms. @@ -703,6 +691,7 @@ config ARCH_RPC select NO_IOPORT select ARCH_SPARSEMEM_ENABLE select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. @@ -721,6 +710,7 @@ config ARCH_SA1100 select HAVE_SCHED_CLOCK select TICK_ONESHOT select ARCH_REQUIRE_GPIOLIB + select NEED_MACH_MEMORY_H help Support for StrongARM 11x0 based boards. @@ -732,7 +722,6 @@ config ARCH_S3C2410 select CLKDEV_LOOKUP select ARCH_USES_GETTIMEOFFSET select HAVE_S3C2410_I2C if I2C - select NO_MACH_MEMORY_H help Samsung S3C2410X CPU based systems, such as the Simtec Electronics BAST (), the IPAQ 1940 or @@ -765,7 +754,6 @@ config ARCH_S3C64XX select SAMSUNG_GPIOLIB_4BIT select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG - select NO_MACH_MEMORY_H help Samsung S3C64XX series based systems @@ -781,7 +769,6 @@ config ARCH_S5P64X0 select HAVE_SCHED_CLOCK select HAVE_S3C2410_I2C if I2C select HAVE_S3C_RTC if RTC_CLASS - select NO_MACH_MEMORY_H help Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440, SMDK6450. @@ -797,7 +784,6 @@ config ARCH_S5PC100 select HAVE_S3C2410_I2C if I2C select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_WATCHDOG if WATCHDOG - select NO_MACH_MEMORY_H help Samsung S5PC100 series based systems @@ -817,6 +803,7 @@ config ARCH_S5PV210 select HAVE_S3C2410_I2C if I2C select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_WATCHDOG if WATCHDOG + select NEED_MACH_MEMORY_H help Samsung S5PV210/S5PC110 series based systems @@ -833,6 +820,7 @@ config ARCH_EXYNOS4 select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG + select NEED_MACH_MEMORY_H help Samsung EXYNOS4 series based systems @@ -844,6 +832,7 @@ config ARCH_SHARK select ZONE_DMA select PCI select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help Support for the StrongARM based Digital DNARD machine, also known as "Shark" (). @@ -855,7 +844,6 @@ config ARCH_TCC_926 select HAVE_CLK select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS - select NO_MACH_MEMORY_H help Support for Telechips TCC ARM926-based systems. @@ -872,6 +860,7 @@ config ARCH_U300 select CLKDEV_LOOKUP select HAVE_MACH_CLKDEV select GENERIC_GPIO + select NEED_MACH_MEMORY_H help Support for ST-Ericsson U300 series mobile platforms. @@ -883,7 +872,6 @@ config ARCH_U8500 select CLKDEV_LOOKUP select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_CPUFREQ - select NO_MACH_MEMORY_H help Support for ST-Ericsson's Ux500 architecture @@ -895,7 +883,6 @@ config ARCH_NOMADIK select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS select ARCH_REQUIRE_GPIOLIB - select NO_MACH_MEMORY_H help Support for the Nomadik platform by ST-Ericsson @@ -909,7 +896,6 @@ config ARCH_DAVINCI select GENERIC_ALLOCATOR select GENERIC_IRQ_CHIP select ARCH_HAS_HOLES_MEMORYMODEL - select NO_MACH_MEMORY_H help Support for TI's DaVinci platform. @@ -933,7 +919,6 @@ config PLAT_SPEAR select CLKSRC_MMIO select GENERIC_CLOCKEVENTS select HAVE_CLK - select NO_MACH_MEMORY_H help Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx). @@ -945,7 +930,6 @@ config ARCH_VT8500 select GENERIC_CLOCKEVENTS select ARCH_REQUIRE_GPIOLIB select HAVE_PWM - select NO_MACH_MEMORY_H help Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. @@ -959,7 +943,6 @@ config ARCH_ZYNQ select ARM_AMBA select ICST select USE_OF - select NO_MACH_MEMORY_H help Support for Xilinx Zynq ARM Cortex A9 Platform endchoice -- cgit v1.2.3