From 564f59509e26355965949c677f9d6eb064a3aa0b Mon Sep 17 00:00:00 2001
From: Shahar Levi <shahar_levi@ti.com>
Date: Mon, 4 Apr 2011 10:20:39 +0300
Subject: wl12xx: Set End-of-transaction Flag at Wl127x AP Mode

End-of-transaction flag should be set when working with
wl127x chip on AP mode.

Thanks Ido Yariv <ido@wizery.com> for the guidance with that.

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 0c69e959d0d..11497a90463 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1011,6 +1011,10 @@ static int wl1271_chip_wakeup(struct wl1271 *wl)
 		wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1271 PG20)",
 			     wl->chip.id);
 
+		/* end-of-transaction flag should be set in wl127x AP mode */
+		if (wl->bss_type == BSS_TYPE_AP_BSS)
+			wl->quirks |= WL12XX_QUIRK_END_OF_TRANSACTION;
+
 		ret = wl1271_setup(wl);
 		if (ret < 0)
 			goto out;
-- 
cgit v1.2.3


From c75bbcdb200e2815c855e42a4685d170858af306 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Mon, 4 Apr 2011 10:38:47 +0300
Subject: wl12xx: sleep instead of wakeup after tx work

commit d05c806 ("wl12xx: rearrange some ELP wake_up/sleep calls")
introduced a bug in which wl1271_ps_elp_wakeup() was called instead
of wl1271_ps_elp_sleep() after completing the tx work.

Reported-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/tx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
index 7a3339fd341..c8366596446 100644
--- a/drivers/net/wireless/wl12xx/tx.c
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -630,7 +630,7 @@ void wl1271_tx_work(struct work_struct *work)
 
 	wl1271_tx_work_locked(wl);
 
-	wl1271_ps_elp_wakeup(wl);
+	wl1271_ps_elp_sleep(wl);
 out:
 	mutex_unlock(&wl->mutex);
 }
-- 
cgit v1.2.3


From a665d6e260f0233aac73f74d15bb6a029cc5ec47 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Sun, 3 Apr 2011 02:01:59 +0300
Subject: wl12xx: avoid premature elp entrance

The elp_work is being enqueued on wl1271_ps_elp_sleep, but doesn't get
cancelled on wl1271_ps_elp_wakeup. This might cause immediate entrance
to elp when the wl->mutex is being released, rather than using the delayed
enqueueing optimization.

Cancel elp_work on wakeup request, and add a new WL1271_FLAG_ELP_REQUESTED
flag to further synchronize the elp actions.

[Fixed a couple of typos in some comments -- Luca]

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/ps.c     | 30 ++++++++++++++++++++++++------
 drivers/net/wireless/wl12xx/wl12xx.h |  1 +
 2 files changed, 25 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/ps.c b/drivers/net/wireless/wl12xx/ps.c
index b8deada5d02..b59b67711a1 100644
--- a/drivers/net/wireless/wl12xx/ps.c
+++ b/drivers/net/wireless/wl12xx/ps.c
@@ -43,6 +43,10 @@ void wl1271_elp_work(struct work_struct *work)
 	if (unlikely(wl->state == WL1271_STATE_OFF))
 		goto out;
 
+	/* our work might have been already cancelled */
+	if (unlikely(!test_bit(WL1271_FLAG_ELP_REQUESTED, &wl->flags)))
+		goto out;
+
 	if (test_bit(WL1271_FLAG_IN_ELP, &wl->flags) ||
 	    (!test_bit(WL1271_FLAG_PSM, &wl->flags) &&
 	     !test_bit(WL1271_FLAG_IDLE, &wl->flags)))
@@ -61,12 +65,16 @@ out:
 /* Routines to toggle sleep mode while in ELP */
 void wl1271_ps_elp_sleep(struct wl1271 *wl)
 {
-	if (test_bit(WL1271_FLAG_PSM, &wl->flags) ||
-	    test_bit(WL1271_FLAG_IDLE, &wl->flags)) {
-		cancel_delayed_work(&wl->elp_work);
-		ieee80211_queue_delayed_work(wl->hw, &wl->elp_work,
-					     msecs_to_jiffies(ELP_ENTRY_DELAY));
-	}
+	/* we shouldn't get consecutive sleep requests */
+	if (WARN_ON(test_and_set_bit(WL1271_FLAG_ELP_REQUESTED, &wl->flags)))
+		return;
+
+	if (!test_bit(WL1271_FLAG_PSM, &wl->flags) &&
+	    !test_bit(WL1271_FLAG_IDLE, &wl->flags))
+		return;
+
+	ieee80211_queue_delayed_work(wl->hw, &wl->elp_work,
+				     msecs_to_jiffies(ELP_ENTRY_DELAY));
 }
 
 int wl1271_ps_elp_wakeup(struct wl1271 *wl)
@@ -77,6 +85,16 @@ int wl1271_ps_elp_wakeup(struct wl1271 *wl)
 	u32 start_time = jiffies;
 	bool pending = false;
 
+	/*
+	 * we might try to wake up even if we didn't go to sleep
+	 * before (e.g. on boot)
+	 */
+	if (!test_and_clear_bit(WL1271_FLAG_ELP_REQUESTED, &wl->flags))
+		return 0;
+
+	/* don't cancel_sync as it might contend for a mutex and deadlock */
+	cancel_delayed_work(&wl->elp_work);
+
 	if (!test_bit(WL1271_FLAG_IN_ELP, &wl->flags))
 		return 0;
 
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index 7c521af58e7..f3de96212b9 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -345,6 +345,7 @@ enum wl12xx_flags {
 	WL1271_FLAG_TX_QUEUE_STOPPED,
 	WL1271_FLAG_TX_PENDING,
 	WL1271_FLAG_IN_ELP,
+	WL1271_FLAG_ELP_REQUESTED,
 	WL1271_FLAG_PSM,
 	WL1271_FLAG_PSM_REQUESTED,
 	WL1271_FLAG_IRQ_RUNNING,
-- 
cgit v1.2.3


From b03acadea4f46884aa3c3e4d3a6ce03d283525e6 Mon Sep 17 00:00:00 2001
From: Shahar Levi <shahar_levi@ti.com>
Date: Sun, 3 Apr 2011 13:54:54 +0300
Subject: wl12xx: Set correct REF CLK and TCXO CLK values to the FW

Fix mismatch between the REF CLK and TCXO CLK information that is
set in the platform data and the NVS, so we override what comes
from the NVS and replace it with what comes from the platform data.

[Small fix in a comment -- Luca]

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/cmd.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c
index d48331682e7..a9ffdd86f9b 100644
--- a/drivers/net/wireless/wl12xx/cmd.c
+++ b/drivers/net/wireless/wl12xx/cmd.c
@@ -129,6 +129,9 @@ int wl1271_cmd_general_parms(struct wl1271 *wl)
 	if (gp->tx_bip_fem_auto_detect)
 		answer = true;
 
+	/* Override the REF CLK from the NVS with the one from platform data */
+	gen_parms->general_params.ref_clock = wl->ref_clock;
+
 	ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer);
 	if (ret < 0) {
 		wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed");
@@ -168,6 +171,10 @@ int wl128x_cmd_general_parms(struct wl1271 *wl)
 	if (gp->tx_bip_fem_auto_detect)
 		answer = true;
 
+	/* Replace REF and TCXO CLKs with the ones from platform data */
+	gen_parms->general_params.ref_clock = wl->ref_clock;
+	gen_parms->general_params.tcxo_ref_clock = wl->tcxo_clock;
+
 	ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer);
 	if (ret < 0) {
 		wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed");
-- 
cgit v1.2.3


From a20a5b7e48e24c1bf9c10ba27cb1862f8f777d00 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Tue, 5 Apr 2011 18:21:31 +0300
Subject: wl12xx: print actual rx packet size (without padding)

When debugging, reduce the padding size from each rx packet, to
get the actual packet size (so comparing it against a cap file
will be easier)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/rx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/wl12xx/rx.c b/drivers/net/wireless/wl12xx/rx.c
index 2a581495d5c..faf5a1d3c2c 100644
--- a/drivers/net/wireless/wl12xx/rx.c
+++ b/drivers/net/wireless/wl12xx/rx.c
@@ -121,7 +121,8 @@ static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length)
 
 	wl1271_rx_status(wl, desc, IEEE80211_SKB_RXCB(skb), beacon);
 
-	wl1271_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb, skb->len,
+	wl1271_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb,
+		     skb->len - desc->pad_len,
 		     beacon ? "beacon" : "");
 
 	skb_trim(skb, skb->len - desc->pad_len);
-- 
cgit v1.2.3


From 30df14d0d35dd166d50b8ea80d5f0b7ef1edb6da Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Tue, 5 Apr 2011 19:13:28 +0300
Subject: wl12xx: avoid redundant join on interface reconfiguration

ieee80211_reconfig() sets most of the "changed" flags regardless
of the actual change (e.g. BSS_CHANGED_ASSOC will be set even if
the interface is still not associated). in this case the driver
will issue some unneeded commands.

Since the driver relies solely on the BSS_CHANGED_ASSOC flag,
without checking if there was an actual change, it will end up
issuing unjoin() and dummy_join() commands, although it was
never associated and should just remain idle.

Avoid it by checking the actual state change, in addition to the
"changed" flag.

(there seem to be more redundant configuration commands being
issued, but they shouldn't harm)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 11497a90463..1dd735cc38b 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -2698,8 +2698,10 @@ static void wl1271_bss_info_changed_sta(struct wl1271 *wl,
 			}
 		} else {
 			/* use defaults when not associated */
+			bool was_assoc =
+			    !!test_and_clear_bit(WL1271_FLAG_STA_ASSOCIATED,
+						 &wl->flags);
 			clear_bit(WL1271_FLAG_STA_STATE_SENT, &wl->flags);
-			clear_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags);
 			wl->aid = 0;
 
 			/* free probe-request template */
@@ -2725,8 +2727,10 @@ static void wl1271_bss_info_changed_sta(struct wl1271 *wl,
 				goto out;
 
 			/* restore the bssid filter and go to dummy bssid */
-			wl1271_unjoin(wl);
-			wl1271_dummy_join(wl);
+			if (was_assoc) {
+				wl1271_unjoin(wl);
+				wl1271_dummy_join(wl);
+			}
 		}
 	}
 
-- 
cgit v1.2.3


From cb5ae0530e0e2af86d128ce758645b6b4a9132e1 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Thu, 7 Apr 2011 15:52:05 +0300
Subject: wl12xx: configure rates when working in ibss mode

When working in ibss mode, we don't configure rate policy per station
(as we use the same link for multiple stations), so currently the
1mb/s rate is being used.

Instead, configure the firmware to use the whole 11b rates by default.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/conf.h |  7 +++++++
 drivers/net/wireless/wl12xx/main.c | 18 ++++++++++++++++++
 2 files changed, 25 insertions(+)

diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index d16094f2604..5551d9d4016 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -516,6 +516,13 @@ struct conf_rx_settings {
 #define CONF_TX_AP_DEFAULT_MGMT_RATES  (CONF_HW_BIT_RATE_1MBPS | \
 	CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS)
 
+/*
+ * Default rates for working as IBSS. use 11b rates
+ */
+#define CONF_TX_IBSS_DEFAULT_RATES  (CONF_HW_BIT_RATE_1MBPS |       \
+		CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS | \
+		CONF_HW_BIT_RATE_11MBPS);
+
 struct conf_tx_rate_class {
 
 	/*
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 1dd735cc38b..53a8e2357cc 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -2509,6 +2509,24 @@ static void wl1271_bss_info_changed_ap(struct wl1271 *wl,
 		}
 	}
 
+	if (changed & BSS_CHANGED_IBSS) {
+		wl1271_debug(DEBUG_ADHOC, "ibss_joined: %d",
+			     bss_conf->ibss_joined);
+
+		if (bss_conf->ibss_joined) {
+			u32 rates = bss_conf->basic_rates;
+			wl->basic_rate_set = wl1271_tx_enabled_rates_get(wl,
+									 rates);
+			wl->basic_rate = wl1271_tx_min_rate_get(wl);
+
+			/* by default, use 11b rates */
+			wl->rate_set = CONF_TX_IBSS_DEFAULT_RATES;
+			ret = wl1271_acx_sta_rate_policies(wl);
+			if (ret < 0)
+				goto out;
+		}
+	}
+
 	ret = wl1271_bss_erp_info_changed(wl, bss_conf, changed);
 	if (ret < 0)
 		goto out;
-- 
cgit v1.2.3


From ff86843dfbb368766d0aecd0147821d9a2b60edb Mon Sep 17 00:00:00 2001
From: Shahar Levi <shahar_levi@ti.com>
Date: Mon, 11 Apr 2011 15:41:46 +0300
Subject: wl12xx: FM WLAN coexistence

Add support to FM WLAN coexistence (STA only).  Some WiFi harmonics
may interfere with FM operation, to avoid this problem special
coexistence techniques are activated around some FM frequencies.

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/acx.c  | 40 +++++++++++++++++++++++++
 drivers/net/wireless/wl12xx/acx.h  | 61 ++++++++++++++++++++++++++++++++++++++
 drivers/net/wireless/wl12xx/conf.h | 14 +++++++++
 drivers/net/wireless/wl12xx/init.c |  5 ++++
 drivers/net/wireless/wl12xx/main.c | 17 +++++++++++
 5 files changed, 137 insertions(+)

diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
index a5c9c0aff83..8a39d1e40a6 100644
--- a/drivers/net/wireless/wl12xx/acx.c
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -1626,3 +1626,43 @@ out:
 	kfree(acx);
 	return ret;
 }
+
+int wl1271_acx_fm_coex(struct wl1271 *wl)
+{
+	struct wl1271_acx_fm_coex *acx;
+	int ret;
+
+	wl1271_debug(DEBUG_ACX, "acx fm coex setting");
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->enable = wl->conf.fm_coex.enable;
+	acx->swallow_period = wl->conf.fm_coex.swallow_period;
+	acx->n_divider_fref_set_1 = wl->conf.fm_coex.n_divider_fref_set_1;
+	acx->n_divider_fref_set_2 = wl->conf.fm_coex.n_divider_fref_set_2;
+	acx->m_divider_fref_set_1 =
+		cpu_to_le16(wl->conf.fm_coex.m_divider_fref_set_1);
+	acx->m_divider_fref_set_2 =
+		cpu_to_le16(wl->conf.fm_coex.m_divider_fref_set_2);
+	acx->coex_pll_stabilization_time =
+		cpu_to_le32(wl->conf.fm_coex.coex_pll_stabilization_time);
+	acx->ldo_stabilization_time =
+		cpu_to_le16(wl->conf.fm_coex.ldo_stabilization_time);
+	acx->fm_disturbed_band_margin =
+		wl->conf.fm_coex.fm_disturbed_band_margin;
+	acx->swallow_clk_diff = wl->conf.fm_coex.swallow_clk_diff;
+
+	ret = wl1271_cmd_configure(wl, ACX_FM_COEX_CFG, acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1271_warning("acx fm coex setting failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h
index 942908cd53a..2dde0346e95 100644
--- a/drivers/net/wireless/wl12xx/acx.h
+++ b/drivers/net/wireless/wl12xx/acx.h
@@ -1179,6 +1179,65 @@ struct wl1271_acx_inconnection_sta {
 	u8 padding1[2];
 } __packed;
 
+/*
+ * ACX_FM_COEX_CFG
+ * set the FM co-existence parameters.
+ */
+struct wl1271_acx_fm_coex {
+	struct acx_header header;
+	/* enable(1) / disable(0) the FM Coex feature */
+	u8 enable;
+	/*
+	 * Swallow period used in COEX PLL swallowing mechanism.
+	 * 0xFF = use FW default
+	 */
+	u8 swallow_period;
+	/*
+	 * The N divider used in COEX PLL swallowing mechanism for Fref of
+	 * 38.4/19.2 Mhz. 0xFF = use FW default
+	 */
+	u8 n_divider_fref_set_1;
+	/*
+	 * The N divider used in COEX PLL swallowing mechanism for Fref of
+	 * 26/52 Mhz. 0xFF = use FW default
+	 */
+	u8 n_divider_fref_set_2;
+	/*
+	 * The M divider used in COEX PLL swallowing mechanism for Fref of
+	 * 38.4/19.2 Mhz. 0xFFFF = use FW default
+	 */
+	__le16 m_divider_fref_set_1;
+	/*
+	 * The M divider used in COEX PLL swallowing mechanism for Fref of
+	 * 26/52 Mhz. 0xFFFF = use FW default
+	 */
+	__le16 m_divider_fref_set_2;
+	/*
+	 * The time duration in uSec required for COEX PLL to stabilize.
+	 * 0xFFFFFFFF = use FW default
+	 */
+	__le32 coex_pll_stabilization_time;
+	/*
+	 * The time duration in uSec required for LDO to stabilize.
+	 * 0xFFFFFFFF = use FW default
+	 */
+	__le16 ldo_stabilization_time;
+	/*
+	 * The disturbed frequency band margin around the disturbed frequency
+	 * center (single sided).
+	 * For example, if 2 is configured, the following channels will be
+	 * considered disturbed channel:
+	 *   80 +- 0.1 MHz, 91 +- 0.1 MHz, 98 +- 0.1 MHz, 102 +- 0.1 MH
+	 * 0xFF = use FW default
+	 */
+	u8 fm_disturbed_band_margin;
+	/*
+	 * The swallow clock difference of the swallowing mechanism.
+	 * 0xFF = use FW default
+	 */
+	u8 swallow_clk_diff;
+} __packed;
+
 enum {
 	ACX_WAKE_UP_CONDITIONS      = 0x0002,
 	ACX_MEM_CFG                 = 0x0003,
@@ -1208,6 +1267,7 @@ enum {
 	ACX_BCN_DTIM_OPTIONS        = 0x0031,
 	ACX_SG_ENABLE               = 0x0032,
 	ACX_SG_CFG                  = 0x0033,
+	ACX_FM_COEX_CFG             = 0x0034,
 	ACX_BEACON_FILTER_TABLE     = 0x0038,
 	ACX_ARP_IP_FILTER           = 0x0039,
 	ACX_ROAMING_STATISTICS_TBL  = 0x003B,
@@ -1318,5 +1378,6 @@ int wl1271_acx_ap_max_tx_retry(struct wl1271 *wl);
 int wl1271_acx_sta_max_tx_retry(struct wl1271 *wl);
 int wl1271_acx_config_ps(struct wl1271 *wl);
 int wl1271_acx_set_inconnection_sta(struct wl1271 *wl, u8 *addr);
+int wl1271_acx_fm_coex(struct wl1271 *wl);
 
 #endif /* __WL1271_ACX_H__ */
diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index 5551d9d4016..a4e0acff867 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -1199,6 +1199,19 @@ struct conf_memory_settings {
 	u8 tx_min;
 };
 
+struct conf_fm_coex {
+	u8 enable;
+	u8 swallow_period;
+	u8 n_divider_fref_set_1;
+	u8 n_divider_fref_set_2;
+	u16 m_divider_fref_set_1;
+	u16 m_divider_fref_set_2;
+	u32 coex_pll_stabilization_time;
+	u16 ldo_stabilization_time;
+	u8 fm_disturbed_band_margin;
+	u8 swallow_clk_diff;
+};
+
 struct conf_drv_settings {
 	struct conf_sg_settings sg;
 	struct conf_rx_settings rx;
@@ -1212,6 +1225,7 @@ struct conf_drv_settings {
 	struct conf_ht_setting ht;
 	struct conf_memory_settings mem_wl127x;
 	struct conf_memory_settings mem_wl128x;
+	struct conf_fm_coex fm_coex;
 	u8 hci_io_ds;
 };
 
diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
index ab3b1e21de2..46fd7212b23 100644
--- a/drivers/net/wireless/wl12xx/init.c
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -356,6 +356,11 @@ static int wl1271_sta_hw_init(struct wl1271 *wl)
 	if (ret < 0)
 		return ret;
 
+	/* FM WLAN coexistence */
+	ret = wl1271_acx_fm_coex(wl);
+	if (ret < 0)
+		return ret;
+
 	/* Beacons and broadcast settings */
 	ret = wl1271_init_beacon_broadcast(wl);
 	if (ret < 0)
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 53a8e2357cc..8a7a8c5fcf5 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -320,6 +320,18 @@ static struct conf_drv_settings default_conf = {
 		.min_req_rx_blocks            = 22,
 		.tx_min                       = 27,
 	},
+	.fm_coex = {
+		.enable                       = true,
+		.swallow_period               = 5,
+		.n_divider_fref_set_1         = 0xff,       /* default */
+		.n_divider_fref_set_2         = 12,
+		.m_divider_fref_set_1         = 148,
+		.m_divider_fref_set_2         = 0xffff,     /* default */
+		.coex_pll_stabilization_time  = 0xffffffff, /* default */
+		.ldo_stabilization_time       = 0xffff,     /* default */
+		.fm_disturbed_band_margin     = 0xff,       /* default */
+		.swallow_clk_diff             = 0xff,       /* default */
+	},
 	.hci_io_ds = HCI_IO_DS_6MA,
 };
 
@@ -508,6 +520,11 @@ static int wl1271_plt_init(struct wl1271 *wl)
 	if (ret < 0)
 		goto out_free_memmap;
 
+	/* FM WLAN coexistence */
+	ret = wl1271_acx_fm_coex(wl);
+	if (ret < 0)
+		goto out_free_memmap;
+
 	/* Energy detection */
 	ret = wl1271_init_energy_detection(wl);
 	if (ret < 0)
-- 
cgit v1.2.3


From 2370841bf1a735661db3d3ae63385be3475b7452 Mon Sep 17 00:00:00 2001
From: Shahar Levi <shahar_levi@ti.com>
Date: Wed, 13 Apr 2011 14:52:50 +0300
Subject: wl12xx: Update Power Save Exit Retries Packets

Reducing the retries of sending PS exit packets to the peer AP.
That fix is to avoid sending unrealizable number of PS exit packets
in case of ap lost.

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 8a7a8c5fcf5..c0cfcc7e11a 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -258,7 +258,7 @@ static struct conf_drv_settings default_conf = {
 		.bet_enable                  = CONF_BET_MODE_ENABLE,
 		.bet_max_consecutive         = 50,
 		.psm_entry_retries           = 5,
-		.psm_exit_retries            = 255,
+		.psm_exit_retries            = 16,
 		.psm_entry_nullfunc_retries  = 3,
 		.psm_entry_hangover_period   = 1,
 		.keep_alive_interval         = 55000,
-- 
cgit v1.2.3


From 1fe9e2464c667903d7eec0314db26c462ca9d276 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Sun, 17 Apr 2011 11:20:47 +0300
Subject: wl12xx: add debugfs entries for dtim_interval and beacon_interval

When configuring ACX_WAKE_UP_CONDITIONS (before entering psm), we
tell the firmware to wake up once in N DTIMs/beacons.

Allow control of this value via debugfs (for debugging purposes).

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/debugfs.c | 132 ++++++++++++++++++++++++++++++++++
 1 file changed, 132 insertions(+)

diff --git a/drivers/net/wireless/wl12xx/debugfs.c b/drivers/net/wireless/wl12xx/debugfs.c
index 70ab1986788..88c6efe33ec 100644
--- a/drivers/net/wireless/wl12xx/debugfs.c
+++ b/drivers/net/wireless/wl12xx/debugfs.c
@@ -291,6 +291,136 @@ static const struct file_operations gpio_power_ops = {
 	.llseek = default_llseek,
 };
 
+static ssize_t dtim_interval_read(struct file *file, char __user *user_buf,
+				  size_t count, loff_t *ppos)
+{
+	struct wl1271 *wl = file->private_data;
+	u8 value;
+
+	if (wl->conf.conn.wake_up_event == CONF_WAKE_UP_EVENT_DTIM ||
+	    wl->conf.conn.wake_up_event == CONF_WAKE_UP_EVENT_N_DTIM)
+		value = wl->conf.conn.listen_interval;
+	else
+		value = 0;
+
+	return wl1271_format_buffer(user_buf, count, ppos, "%d\n", value);
+}
+
+static ssize_t dtim_interval_write(struct file *file,
+				   const char __user *user_buf,
+				   size_t count, loff_t *ppos)
+{
+	struct wl1271 *wl = file->private_data;
+	char buf[10];
+	size_t len;
+	unsigned long value;
+	int ret;
+
+	len = min(count, sizeof(buf) - 1);
+	if (copy_from_user(buf, user_buf, len))
+		return -EFAULT;
+	buf[len] = '\0';
+
+	ret = strict_strtoul(buf, 0, &value);
+	if (ret < 0) {
+		wl1271_warning("illegal value for dtim_interval");
+		return -EINVAL;
+	}
+
+	if (value < 1 || value > 10) {
+		wl1271_warning("dtim value is not in valid range");
+		return -ERANGE;
+	}
+
+	mutex_lock(&wl->mutex);
+
+	wl->conf.conn.listen_interval = value;
+	/* for some reason there are different event types for 1 and >1 */
+	if (value == 1)
+		wl->conf.conn.wake_up_event = CONF_WAKE_UP_EVENT_DTIM;
+	else
+		wl->conf.conn.wake_up_event = CONF_WAKE_UP_EVENT_N_DTIM;
+
+	/*
+	 * we don't reconfigure ACX_WAKE_UP_CONDITIONS now, so it will only
+	 * take effect on the next time we enter psm.
+	 */
+	mutex_unlock(&wl->mutex);
+	return count;
+}
+
+static const struct file_operations dtim_interval_ops = {
+	.read = dtim_interval_read,
+	.write = dtim_interval_write,
+	.open = wl1271_open_file_generic,
+	.llseek = default_llseek,
+};
+
+static ssize_t beacon_interval_read(struct file *file, char __user *user_buf,
+				    size_t count, loff_t *ppos)
+{
+	struct wl1271 *wl = file->private_data;
+	u8 value;
+
+	if (wl->conf.conn.wake_up_event == CONF_WAKE_UP_EVENT_BEACON ||
+	    wl->conf.conn.wake_up_event == CONF_WAKE_UP_EVENT_N_BEACONS)
+		value = wl->conf.conn.listen_interval;
+	else
+		value = 0;
+
+	return wl1271_format_buffer(user_buf, count, ppos, "%d\n", value);
+}
+
+static ssize_t beacon_interval_write(struct file *file,
+				     const char __user *user_buf,
+				     size_t count, loff_t *ppos)
+{
+	struct wl1271 *wl = file->private_data;
+	char buf[10];
+	size_t len;
+	unsigned long value;
+	int ret;
+
+	len = min(count, sizeof(buf) - 1);
+	if (copy_from_user(buf, user_buf, len))
+		return -EFAULT;
+	buf[len] = '\0';
+
+	ret = strict_strtoul(buf, 0, &value);
+	if (ret < 0) {
+		wl1271_warning("illegal value for beacon_interval");
+		return -EINVAL;
+	}
+
+	if (value < 1 || value > 255) {
+		wl1271_warning("beacon interval value is not in valid range");
+		return -ERANGE;
+	}
+
+	mutex_lock(&wl->mutex);
+
+	wl->conf.conn.listen_interval = value;
+	/* for some reason there are different event types for 1 and >1 */
+	if (value == 1)
+		wl->conf.conn.wake_up_event = CONF_WAKE_UP_EVENT_BEACON;
+	else
+		wl->conf.conn.wake_up_event = CONF_WAKE_UP_EVENT_N_BEACONS;
+
+	/*
+	 * we don't reconfigure ACX_WAKE_UP_CONDITIONS now, so it will only
+	 * take effect on the next time we enter psm.
+	 */
+	mutex_unlock(&wl->mutex);
+	return count;
+}
+
+static const struct file_operations beacon_interval_ops = {
+	.read = beacon_interval_read,
+	.write = beacon_interval_write,
+	.open = wl1271_open_file_generic,
+	.llseek = default_llseek,
+};
+
 static int wl1271_debugfs_add_files(struct wl1271 *wl,
 				     struct dentry *rootdir)
 {
@@ -399,6 +529,8 @@ static int wl1271_debugfs_add_files(struct wl1271 *wl,
 	DEBUGFS_ADD(excessive_retries, rootdir);
 
 	DEBUGFS_ADD(gpio_power, rootdir);
+	DEBUGFS_ADD(dtim_interval, rootdir);
+	DEBUGFS_ADD(beacon_interval, rootdir);
 
 	return 0;
 
-- 
cgit v1.2.3


From ae825e4ba81203e1b3d3159f24327cdc2629dbd8 Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Mon, 18 Apr 2011 16:40:14 +0300
Subject: wl12xx: Modify memory configuration for 128x/AP

The 128x/AP firmware does not yet support dynamic memory. Temporarily,
the memory configuration for the 127x was used both for 127x/AP as well
as 128x/AP. Since the two chips don't have the same number of memory
blocks, TP was significantly degraded.

This hasn't been fine tuned yet, but using the base 128x numbers
(without dynamic memory) seems to yield much better results (around 30%
more). Additional fine tuning will be required in the future.

Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/acx.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
index 8a39d1e40a6..b1b5139139e 100644
--- a/drivers/net/wireless/wl12xx/acx.c
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -954,6 +954,7 @@ out:
 int wl1271_acx_ap_mem_cfg(struct wl1271 *wl)
 {
 	struct wl1271_acx_ap_config_memory *mem_conf;
+	struct conf_memory_settings *mem;
 	int ret;
 
 	wl1271_debug(DEBUG_ACX, "wl1271 mem cfg");
@@ -964,14 +965,21 @@ int wl1271_acx_ap_mem_cfg(struct wl1271 *wl)
 		goto out;
 	}
 
+	if (wl->chip.id == CHIP_ID_1283_PG20)
+		/*
+		 * FIXME: The 128x AP FW does not yet support dynamic memory.
+		 * Use the base memory configuration for 128x for now. This
+		 * should be fine tuned in the future.
+		 */
+		mem = &wl->conf.mem_wl128x;
+	else
+		mem = &wl->conf.mem_wl127x;
+
 	/* memory config */
-	/* FIXME: for now we always use mem_wl127x for AP, because it
-	 * doesn't support dynamic memory and we don't have the
-	 * optimal values for wl128x without dynamic memory yet */
-	mem_conf->num_stations = wl->conf.mem_wl127x.num_stations;
-	mem_conf->rx_mem_block_num = wl->conf.mem_wl127x.rx_block_num;
-	mem_conf->tx_min_mem_block_num = wl->conf.mem_wl127x.tx_min_block_num;
-	mem_conf->num_ssid_profiles = wl->conf.mem_wl127x.ssid_profiles;
+	mem_conf->num_stations = mem->num_stations;
+	mem_conf->rx_mem_block_num = mem->rx_block_num;
+	mem_conf->tx_min_mem_block_num = mem->tx_min_block_num;
+	mem_conf->num_ssid_profiles = mem->ssid_profiles;
 	mem_conf->total_tx_descriptors = cpu_to_le32(ACX_TX_DESCRIPTORS);
 
 	ret = wl1271_cmd_configure(wl, ACX_MEM_CFG, mem_conf,
-- 
cgit v1.2.3


From ef2e3004855e90d2919105e4a91d7df6ab9845a9 Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Mon, 18 Apr 2011 16:44:11 +0300
Subject: wl12xx: Restart TX when TX descriptors are available

The driver stops sending TX packets when either there aren't enough
memory blocks, or it runs out of TX descriptors. The driver continues to
send packets to the FW only when more memory blocks are available.

The FW might free TX descriptors without freeing the corresponding
memory blocks, especially when dynamic memory is enabled. In cases where
memory blocks are not freed at all, the driver will keep waiting for
more memory blocks indefinitely.

Fix this by clearing the WL1271_FLAG_FW_TX_BUSY flag when there are
available TX descriptors.

Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/tx.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
index c8366596446..cc837bba546 100644
--- a/drivers/net/wireless/wl12xx/tx.c
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -65,6 +65,9 @@ static int wl1271_alloc_tx_id(struct wl1271 *wl, struct sk_buff *skb)
 static void wl1271_free_tx_id(struct wl1271 *wl, int id)
 {
 	if (__test_and_clear_bit(id, wl->tx_frames_map)) {
+		if (unlikely(wl->tx_frames_cnt == ACX_TX_DESCRIPTORS))
+			clear_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags);
+
 		wl->tx_frames[id] = NULL;
 		wl->tx_frames_cnt--;
 	}
-- 
cgit v1.2.3


From 4cf557fcf01e352fb418e110dd013e4128493c5f Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Mon, 18 Apr 2011 16:45:10 +0300
Subject: wl12xx: Enable dynamic memory for 127x

The FW can dynamically manage its internal TX & RX memory pools, moving
blocks from one pool to another when necessary. This can significantly
improve performance. Currently this feature is enabled only for 128x.

Enable dynamic memory for 127x as well. Other parameters in the memory
configuration structure may need to be fine tuned, as the optimal values
for these may change once dynamic memory is enabled.

Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index c0cfcc7e11a..6dd72365b63 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -305,7 +305,7 @@ static struct conf_drv_settings default_conf = {
 		.ssid_profiles                = 1,
 		.rx_block_num                 = 70,
 		.tx_min_block_num             = 40,
-		.dynamic_memory               = 0,
+		.dynamic_memory               = 1,
 		.min_req_tx_blocks            = 100,
 		.min_req_rx_blocks            = 22,
 		.tx_min                       = 27,
-- 
cgit v1.2.3


From 33437893025aa3c0195b933ac99ef7de924019f4 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Tue, 26 Apr 2011 23:35:39 +0300
Subject: wl12xx: implement the tx_frames_pending mac80211 callback

Frames are considered pending when they reside in the driver TX queue or
already queued in the FW.

This notion of "pending" is appropriate for power save considerations in
STA mode, but not necessarily in other modes (for instance P2P-GO).

[Fixed a sparse warning about missing "static" in a function
declaration -- Luca]

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 6dd72365b63..e177764e714 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -3147,6 +3147,28 @@ out:
 	return ret;
 }
 
+static bool wl1271_tx_frames_pending(struct ieee80211_hw *hw)
+{
+	struct wl1271 *wl = hw->priv;
+	bool ret = false;
+
+	mutex_lock(&wl->mutex);
+
+	if (unlikely(wl->state == WL1271_STATE_OFF))
+		goto out;
+
+	/* packets are considered pending if in the TX queue or the FW */
+	ret = (wl->tx_queue_count > 0) || (wl->tx_frames_cnt > 0);
+
+	/* the above is appropriate for STA mode for PS purposes */
+	WARN_ON(wl->bss_type != BSS_TYPE_STA_BSS);
+
+out:
+	mutex_unlock(&wl->mutex);
+
+	return ret;
+}
+
 /* can't be const, mac80211 writes to this */
 static struct ieee80211_rate wl1271_rates[] = {
 	{ .bitrate = 10,
@@ -3398,6 +3420,7 @@ static const struct ieee80211_ops wl1271_ops = {
 	.sta_add = wl1271_op_sta_add,
 	.sta_remove = wl1271_op_sta_remove,
 	.ampdu_action = wl1271_op_ampdu_action,
+	.tx_frames_pending = wl1271_tx_frames_pending,
 	CFG80211_TESTMODE_CMD(wl1271_tm_cmd)
 };
 
-- 
cgit v1.2.3


From 34c8e3d2bb901b2920d2a8930c0de82e7fefac76 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Tue, 26 Apr 2011 23:35:40 +0300
Subject: wl12xx: discard corrupted packets in RX

When packets arrive with a RX descriptor indicating corruption, discard
them.

In general white-list the RX descriptor status to prevent rouge data
from being sent up.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/rx.c | 33 ++++++++++++++++++++++++++-------
 1 file changed, 26 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/rx.c b/drivers/net/wireless/wl12xx/rx.c
index faf5a1d3c2c..70091035e01 100644
--- a/drivers/net/wireless/wl12xx/rx.c
+++ b/drivers/net/wireless/wl12xx/rx.c
@@ -76,12 +76,15 @@ static void wl1271_rx_status(struct wl1271 *wl,
 						      status->band);
 
 	if (desc->flags & WL1271_RX_DESC_ENCRYPT_MASK) {
-		status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED;
+		u8 desc_err_code = desc->status & WL1271_RX_DESC_STATUS_MASK;
 
-		if (likely(!(desc->status & WL1271_RX_DESC_DECRYPT_FAIL)))
-			status->flag |= RX_FLAG_DECRYPTED;
-		if (unlikely(desc->status & WL1271_RX_DESC_MIC_FAIL))
+		status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED |
+				RX_FLAG_DECRYPTED;
+
+		if (unlikely(desc_err_code == WL1271_RX_DESC_MIC_FAIL)) {
 			status->flag |= RX_FLAG_MMIC_ERROR;
+			wl1271_warning("Michael MIC error");
+		}
 	}
 }
 
@@ -100,6 +103,25 @@ static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length)
 	if (unlikely(wl->state == WL1271_STATE_PLT))
 		return -EINVAL;
 
+	/* the data read starts with the descriptor */
+	desc = (struct wl1271_rx_descriptor *) data;
+
+	switch (desc->status & WL1271_RX_DESC_STATUS_MASK) {
+	/* discard corrupted packets */
+	case WL1271_RX_DESC_DRIVER_RX_Q_FAIL:
+	case WL1271_RX_DESC_DECRYPT_FAIL:
+		wl1271_warning("corrupted packet in RX with status: 0x%x",
+			       desc->status & WL1271_RX_DESC_STATUS_MASK);
+		return -EINVAL;
+	case WL1271_RX_DESC_SUCCESS:
+	case WL1271_RX_DESC_MIC_FAIL:
+		break;
+	default:
+		wl1271_error("invalid RX descriptor status: 0x%x",
+			     desc->status & WL1271_RX_DESC_STATUS_MASK);
+		return -EINVAL;
+	}
+
 	skb = __dev_alloc_skb(length, GFP_KERNEL);
 	if (!skb) {
 		wl1271_error("Couldn't allocate RX frame");
@@ -109,9 +131,6 @@ static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length)
 	buf = skb_put(skb, length);
 	memcpy(buf, data, length);
 
-	/* the data read starts with the descriptor */
-	desc = (struct wl1271_rx_descriptor *) buf;
-
 	/* now we pull the descriptor out of the buffer */
 	skb_pull(skb, sizeof(*desc));
 
-- 
cgit v1.2.3


From 86c438f40cf3e0f6ce2da80f2d759e61d3e85ad7 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Tue, 26 Apr 2011 23:27:44 +0200
Subject: wl12xx: do not set queue_mapping directly

It is preferred to use the setter that to set queue_mapping directly.
This also helps backporting in compat-wireless.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index e177764e714..a8770102a74 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1294,7 +1294,7 @@ static struct sk_buff *wl12xx_alloc_dummy_packet(struct wl1271 *wl)
 	skb->priority = WL1271_TID_MGMT;
 
 	/* Initialize all fields that might be used */
-	skb->queue_mapping = 0;
+	skb_set_queue_mapping(skb, 0);
 	memset(IEEE80211_SKB_CB(skb), 0, sizeof(struct ieee80211_tx_info));
 
 	return skb;
-- 
cgit v1.2.3


From f7c7c7e69cbc3c5b660a32cc2cb31720b2b420c8 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Fri, 29 Apr 2011 22:25:28 +0300
Subject: wl12xx: strict_stroul introduced converted to kstrtoul

One new patch applied added a couple of new strict_strtoul calls.
Converted those to kstroul().

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/debugfs.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/debugfs.c b/drivers/net/wireless/wl12xx/debugfs.c
index 88c6efe33ec..b17cff6cd75 100644
--- a/drivers/net/wireless/wl12xx/debugfs.c
+++ b/drivers/net/wireless/wl12xx/debugfs.c
@@ -321,7 +321,7 @@ static ssize_t dtim_interval_write(struct file *file,
 		return -EFAULT;
 	buf[len] = '\0';
 
-	ret = strict_strtoul(buf, 0, &value);
+	ret = kstrtoul(buf, 0, &value);
 	if (ret < 0) {
 		wl1271_warning("illegal value for dtim_interval");
 		return -EINVAL;
@@ -386,7 +386,7 @@ static ssize_t beacon_interval_write(struct file *file,
 		return -EFAULT;
 	buf[len] = '\0';
 
-	ret = strict_strtoul(buf, 0, &value);
+	ret = kstrtoul(buf, 0, &value);
 	if (ret < 0) {
 		wl1271_warning("illegal value for beacon_interval");
 		return -EINVAL;
-- 
cgit v1.2.3


From 801f870bc0524bad7ebef9cea52d20e4d4992e4a Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 18 Apr 2011 14:15:20 +0300
Subject: wl12xx: add BT-coexistance for AP

Initialize AP specific BT coexitance parameters to default values and
enable them in AP mode.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/acx.c  | 40 ++++++++++++++++++++++----
 drivers/net/wireless/wl12xx/acx.h  | 16 +++++++++--
 drivers/net/wireless/wl12xx/conf.h | 35 +++++++++++++++++++++--
 drivers/net/wireless/wl12xx/init.c | 15 ++++++----
 drivers/net/wireless/wl12xx/main.c | 57 +++++++++++++++++++++++++++++++++++++-
 5 files changed, 146 insertions(+), 17 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
index b1b5139139e..2b5fb3d2df1 100644
--- a/drivers/net/wireless/wl12xx/acx.c
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -540,13 +540,13 @@ out:
 	return ret;
 }
 
-int wl1271_acx_sg_cfg(struct wl1271 *wl)
+int wl1271_acx_sta_sg_cfg(struct wl1271 *wl)
 {
-	struct acx_bt_wlan_coex_param *param;
+	struct acx_sta_bt_wlan_coex_param *param;
 	struct conf_sg_settings *c = &wl->conf.sg;
 	int i, ret;
 
-	wl1271_debug(DEBUG_ACX, "acx sg cfg");
+	wl1271_debug(DEBUG_ACX, "acx sg sta cfg");
 
 	param = kzalloc(sizeof(*param), GFP_KERNEL);
 	if (!param) {
@@ -555,8 +555,38 @@ int wl1271_acx_sg_cfg(struct wl1271 *wl)
 	}
 
 	/* BT-WLAN coext parameters */
-	for (i = 0; i < CONF_SG_PARAMS_MAX; i++)
-		param->params[i] = cpu_to_le32(c->params[i]);
+	for (i = 0; i < CONF_SG_STA_PARAMS_MAX; i++)
+		param->params[i] = cpu_to_le32(c->sta_params[i]);
+	param->param_idx = CONF_SG_PARAMS_ALL;
+
+	ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param));
+	if (ret < 0) {
+		wl1271_warning("failed to set sg config: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(param);
+	return ret;
+}
+
+int wl1271_acx_ap_sg_cfg(struct wl1271 *wl)
+{
+	struct acx_ap_bt_wlan_coex_param *param;
+	struct conf_sg_settings *c = &wl->conf.sg;
+	int i, ret;
+
+	wl1271_debug(DEBUG_ACX, "acx sg ap cfg");
+
+	param = kzalloc(sizeof(*param), GFP_KERNEL);
+	if (!param) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* BT-WLAN coext parameters */
+	for (i = 0; i < CONF_SG_AP_PARAMS_MAX; i++)
+		param->params[i] = cpu_to_le32(c->ap_params[i]);
 	param->param_idx = CONF_SG_PARAMS_ALL;
 
 	ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param));
diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h
index 2dde0346e95..cd7548dacd5 100644
--- a/drivers/net/wireless/wl12xx/acx.h
+++ b/drivers/net/wireless/wl12xx/acx.h
@@ -370,14 +370,23 @@ struct acx_bt_wlan_coex {
 	u8 pad[3];
 } __packed;
 
-struct acx_bt_wlan_coex_param {
+struct acx_sta_bt_wlan_coex_param {
 	struct acx_header header;
 
-	__le32 params[CONF_SG_PARAMS_MAX];
+	__le32 params[CONF_SG_STA_PARAMS_MAX];
 	u8 param_idx;
 	u8 padding[3];
 } __packed;
 
+struct acx_ap_bt_wlan_coex_param {
+	struct acx_header header;
+
+	__le32 params[CONF_SG_AP_PARAMS_MAX];
+	u8 param_idx;
+	u8 padding[3];
+} __packed;
+
+
 struct acx_dco_itrim_params {
 	struct acx_header header;
 
@@ -1330,7 +1339,8 @@ int wl1271_acx_beacon_filter_opt(struct wl1271 *wl, bool enable_filter);
 int wl1271_acx_beacon_filter_table(struct wl1271 *wl);
 int wl1271_acx_conn_monit_params(struct wl1271 *wl, bool enable);
 int wl1271_acx_sg_enable(struct wl1271 *wl, bool enable);
-int wl1271_acx_sg_cfg(struct wl1271 *wl);
+int wl1271_acx_sta_sg_cfg(struct wl1271 *wl);
+int wl1271_acx_ap_sg_cfg(struct wl1271 *wl);
 int wl1271_acx_cca_threshold(struct wl1271 *wl);
 int wl1271_acx_bcn_dtim_options(struct wl1271 *wl);
 int wl1271_acx_aid(struct wl1271 *wl, u16 aid);
diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index a4e0acff867..2ffbe3e0601 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -396,12 +396,43 @@ enum {
 	CONF_SG_TEMP_PARAM_3,
 	CONF_SG_TEMP_PARAM_4,
 	CONF_SG_TEMP_PARAM_5,
-	CONF_SG_PARAMS_MAX,
+
+	/*
+	 * AP beacon miss
+	 *
+	 * Range: 0 - 255
+	 */
+	CONF_SG_AP_BEACON_MISS_TX,
+
+	/*
+	 * AP RX window length
+	 *
+	 * Range: 0 - 50
+	 */
+	CONF_SG_RX_WINDOW_LENGTH,
+
+	/*
+	 * AP connection protection time
+	 *
+	 * Range: 0 - 5000
+	 */
+	CONF_SG_AP_CONNECTION_PROTECTION_TIME,
+
+	CONF_SG_TEMP_PARAM_6,
+	CONF_SG_TEMP_PARAM_7,
+	CONF_SG_TEMP_PARAM_8,
+	CONF_SG_TEMP_PARAM_9,
+	CONF_SG_TEMP_PARAM_10,
+
+	CONF_SG_STA_PARAMS_MAX = CONF_SG_TEMP_PARAM_5 + 1,
+	CONF_SG_AP_PARAMS_MAX = CONF_SG_TEMP_PARAM_10 + 1,
+
 	CONF_SG_PARAMS_ALL = 0xff
 };
 
 struct conf_sg_settings {
-	u32 params[CONF_SG_PARAMS_MAX];
+	u32 sta_params[CONF_SG_STA_PARAMS_MAX];
+	u32 ap_params[CONF_SG_AP_PARAMS_MAX];
 	u8 state;
 };
 
diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
index 46fd7212b23..1be65691478 100644
--- a/drivers/net/wireless/wl12xx/init.c
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -285,7 +285,10 @@ int wl1271_init_pta(struct wl1271 *wl)
 {
 	int ret;
 
-	ret = wl1271_acx_sg_cfg(wl);
+	if (wl->bss_type == BSS_TYPE_AP_BSS)
+		ret = wl1271_acx_ap_sg_cfg(wl);
+	else
+		ret = wl1271_acx_sta_sg_cfg(wl);
 	if (ret < 0)
 		return ret;
 
@@ -351,11 +354,6 @@ static int wl1271_sta_hw_init(struct wl1271 *wl)
 	if (ret < 0)
 		return ret;
 
-	/* Bluetooth WLAN coexistence */
-	ret = wl1271_init_pta(wl);
-	if (ret < 0)
-		return ret;
-
 	/* FM WLAN coexistence */
 	ret = wl1271_acx_fm_coex(wl);
 	if (ret < 0)
@@ -572,6 +570,11 @@ int wl1271_hw_init(struct wl1271 *wl)
 	if (ret < 0)
 		return ret;
 
+	/* Bluetooth WLAN coexistence */
+	ret = wl1271_init_pta(wl);
+	if (ret < 0)
+		return ret;
+
 	/* Default memory configuration */
 	ret = wl1271_acx_init_mem_config(wl);
 	if (ret < 0)
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index a8770102a74..5f8bb35c647 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -51,7 +51,7 @@
 
 static struct conf_drv_settings default_conf = {
 	.sg = {
-		.params = {
+		.sta_params = {
 			[CONF_SG_BT_PER_THRESHOLD]                  = 7500,
 			[CONF_SG_HV3_MAX_OVERRIDE]                  = 0,
 			[CONF_SG_BT_NFS_SAMPLE_INTERVAL]            = 400,
@@ -101,6 +101,61 @@ static struct conf_drv_settings default_conf = {
 			[CONF_SG_DHCP_TIME]                         = 5000,
 			[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP]  = 100,
 		},
+		.ap_params = {
+			[CONF_SG_BT_PER_THRESHOLD]                  = 7500,
+			[CONF_SG_HV3_MAX_OVERRIDE]                  = 0,
+			[CONF_SG_BT_NFS_SAMPLE_INTERVAL]            = 400,
+			[CONF_SG_BT_LOAD_RATIO]                     = 50,
+			[CONF_SG_AUTO_PS_MODE]                      = 1,
+			[CONF_SG_AUTO_SCAN_PROBE_REQ]               = 170,
+			[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3]   = 50,
+			[CONF_SG_ANTENNA_CONFIGURATION]             = 0,
+			[CONF_SG_BEACON_MISS_PERCENT]               = 60,
+			[CONF_SG_RATE_ADAPT_THRESH]                 = 64,
+			[CONF_SG_RATE_ADAPT_SNR]                    = 1,
+			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR]      = 10,
+			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR]      = 25,
+			[CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR]      = 25,
+			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR]       = 20,
+			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR]       = 25,
+			[CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR]       = 25,
+			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR]     = 7,
+			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR]     = 25,
+			[CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR]     = 25,
+			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR]      = 8,
+			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR]      = 25,
+			[CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR]      = 25,
+			[CONF_SG_RXT]                               = 1200,
+			[CONF_SG_TXT]                               = 1000,
+			[CONF_SG_ADAPTIVE_RXT_TXT]                  = 1,
+			[CONF_SG_PS_POLL_TIMEOUT]                   = 10,
+			[CONF_SG_UPSD_TIMEOUT]                      = 10,
+			[CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR] = 7,
+			[CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR] = 15,
+			[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR] = 15,
+			[CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR]  = 8,
+			[CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR]  = 20,
+			[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR]  = 15,
+			[CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR]         = 20,
+			[CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR]         = 50,
+			[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR]         = 10,
+			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3]  = 200,
+			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP] = 800,
+			[CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME]         = 75,
+			[CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME]       = 15,
+			[CONF_SG_HV3_MAX_SERVED]                    = 6,
+			[CONF_SG_DHCP_TIME]                         = 5000,
+			[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP]  = 100,
+			[CONF_SG_TEMP_PARAM_1]                      = 0,
+			[CONF_SG_TEMP_PARAM_2]                      = 0,
+			[CONF_SG_TEMP_PARAM_3]                      = 0,
+			[CONF_SG_TEMP_PARAM_4]                      = 0,
+			[CONF_SG_TEMP_PARAM_5]                      = 0,
+			[CONF_SG_AP_BEACON_MISS_TX]                 = 3,
+			[CONF_SG_RX_WINDOW_LENGTH]                  = 6,
+			[CONF_SG_AP_CONNECTION_PROTECTION_TIME]     = 50,
+			[CONF_SG_TEMP_PARAM_6]                      = 1,
+		},
 		.state = CONF_SG_PROTECTIVE,
 	},
 	.rx = {
-- 
cgit v1.2.3


From 5f704d180e448d05859e1cb6572822ba27dbcdc7 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 18 Apr 2011 14:15:21 +0300
Subject: wl12xx: use wiphy values for setting rts, frag thresholds on init

Use the wiphy RTS and fragmentation thresholds for initializing the FW
when possible. This mitigates a bug where previously set values are
forgotten after interface down/up.

Add checks before settings these values to ensure they are valid. Use
default values when invalid thresholds are configured.

Update the default RTS threshold to the maximum value given by the
specification.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/acx.c  | 26 ++++++++++++++++++++------
 drivers/net/wireless/wl12xx/acx.h  |  4 ++--
 drivers/net/wireless/wl12xx/init.c |  4 ++--
 drivers/net/wireless/wl12xx/main.c |  6 +++---
 4 files changed, 27 insertions(+), 13 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
index 2b5fb3d2df1..729f72a7b91 100644
--- a/drivers/net/wireless/wl12xx/acx.c
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -325,12 +325,19 @@ out:
 	return ret;
 }
 
-int wl1271_acx_rts_threshold(struct wl1271 *wl, u16 rts_threshold)
+int wl1271_acx_rts_threshold(struct wl1271 *wl, u32 rts_threshold)
 {
 	struct acx_rts_threshold *rts;
 	int ret;
 
-	wl1271_debug(DEBUG_ACX, "acx rts threshold");
+	/*
+	 * If the RTS threshold is not configured or out of range, use the
+	 * default value.
+	 */
+	if (rts_threshold > IEEE80211_MAX_RTS_THRESHOLD)
+		rts_threshold = wl->conf.rx.rts_threshold;
+
+	wl1271_debug(DEBUG_ACX, "acx rts threshold: %d", rts_threshold);
 
 	rts = kzalloc(sizeof(*rts), GFP_KERNEL);
 	if (!rts) {
@@ -338,7 +345,7 @@ int wl1271_acx_rts_threshold(struct wl1271 *wl, u16 rts_threshold)
 		goto out;
 	}
 
-	rts->threshold = cpu_to_le16(rts_threshold);
+	rts->threshold = cpu_to_le16((u16)rts_threshold);
 
 	ret = wl1271_cmd_configure(wl, DOT11_RTS_THRESHOLD, rts, sizeof(*rts));
 	if (ret < 0) {
@@ -928,12 +935,19 @@ out:
 	return ret;
 }
 
-int wl1271_acx_frag_threshold(struct wl1271 *wl, u16 frag_threshold)
+int wl1271_acx_frag_threshold(struct wl1271 *wl, u32 frag_threshold)
 {
 	struct acx_frag_threshold *acx;
 	int ret = 0;
 
-	wl1271_debug(DEBUG_ACX, "acx frag threshold");
+	/*
+	 * If the fragmentation is not configured or out of range, use the
+	 * default value.
+	 */
+	if (frag_threshold > IEEE80211_MAX_FRAG_THRESHOLD)
+		frag_threshold = wl->conf.tx.frag_threshold;
+
+	wl1271_debug(DEBUG_ACX, "acx frag threshold: %d", frag_threshold);
 
 	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
 
@@ -942,7 +956,7 @@ int wl1271_acx_frag_threshold(struct wl1271 *wl, u16 frag_threshold)
 		goto out;
 	}
 
-	acx->frag_threshold = cpu_to_le16(frag_threshold);
+	acx->frag_threshold = cpu_to_le16((u16)frag_threshold);
 	ret = wl1271_cmd_configure(wl, ACX_FRAG_CFG, acx, sizeof(*acx));
 	if (ret < 0) {
 		wl1271_warning("Setting of frag threshold failed: %d", ret);
diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h
index cd7548dacd5..828367d6266 100644
--- a/drivers/net/wireless/wl12xx/acx.h
+++ b/drivers/net/wireless/wl12xx/acx.h
@@ -1333,7 +1333,7 @@ int wl1271_acx_slot(struct wl1271 *wl, enum acx_slot_type slot_time);
 int wl1271_acx_group_address_tbl(struct wl1271 *wl, bool enable,
 				 void *mc_list, u32 mc_list_len);
 int wl1271_acx_service_period_timeout(struct wl1271 *wl);
-int wl1271_acx_rts_threshold(struct wl1271 *wl, u16 rts_threshold);
+int wl1271_acx_rts_threshold(struct wl1271 *wl, u32 rts_threshold);
 int wl1271_acx_dco_itrim_params(struct wl1271 *wl);
 int wl1271_acx_beacon_filter_opt(struct wl1271 *wl, bool enable_filter);
 int wl1271_acx_beacon_filter_table(struct wl1271 *wl);
@@ -1357,7 +1357,7 @@ int wl1271_acx_ac_cfg(struct wl1271 *wl, u8 ac, u8 cw_min, u16 cw_max,
 int wl1271_acx_tid_cfg(struct wl1271 *wl, u8 queue_id, u8 channel_type,
 		       u8 tsid, u8 ps_scheme, u8 ack_policy,
 		       u32 apsd_conf0, u32 apsd_conf1);
-int wl1271_acx_frag_threshold(struct wl1271 *wl, u16 frag_threshold);
+int wl1271_acx_frag_threshold(struct wl1271 *wl, u32 frag_threshold);
 int wl1271_acx_tx_config_options(struct wl1271 *wl);
 int wl1271_acx_ap_mem_cfg(struct wl1271 *wl);
 int wl1271_acx_sta_mem_cfg(struct wl1271 *wl);
diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
index 1be65691478..060ca31818e 100644
--- a/drivers/net/wireless/wl12xx/init.c
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -258,7 +258,7 @@ int wl1271_init_phy_config(struct wl1271 *wl)
 	if (ret < 0)
 		return ret;
 
-	ret = wl1271_acx_rts_threshold(wl, wl->conf.rx.rts_threshold);
+	ret = wl1271_acx_rts_threshold(wl, wl->hw->wiphy->rts_threshold);
 	if (ret < 0)
 		return ret;
 
@@ -614,7 +614,7 @@ int wl1271_hw_init(struct wl1271 *wl)
 		goto out_free_memmap;
 
 	/* Default fragmentation threshold */
-	ret = wl1271_acx_frag_threshold(wl, wl->conf.tx.frag_threshold);
+	ret = wl1271_acx_frag_threshold(wl, wl->hw->wiphy->frag_threshold);
 	if (ret < 0)
 		goto out_free_memmap;
 
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 5f8bb35c647..81a0c8ed5a4 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -163,7 +163,7 @@ static struct conf_drv_settings default_conf = {
 		.packet_detection_threshold  = 0,
 		.ps_poll_timeout             = 15,
 		.upsd_timeout                = 15,
-		.rts_threshold               = 2347,
+		.rts_threshold               = IEEE80211_MAX_RTS_THRESHOLD,
 		.rx_cca_threshold            = 0,
 		.irq_blk_threshold           = 0xFFFF,
 		.irq_pkt_threshold           = 0,
@@ -2360,7 +2360,7 @@ static int wl1271_op_set_frag_threshold(struct ieee80211_hw *hw, u32 value)
 	if (ret < 0)
 		goto out;
 
-	ret = wl1271_acx_frag_threshold(wl, (u16)value);
+	ret = wl1271_acx_frag_threshold(wl, value);
 	if (ret < 0)
 		wl1271_warning("wl1271_op_set_frag_threshold failed: %d", ret);
 
@@ -2388,7 +2388,7 @@ static int wl1271_op_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
 	if (ret < 0)
 		goto out;
 
-	ret = wl1271_acx_rts_threshold(wl, (u16) value);
+	ret = wl1271_acx_rts_threshold(wl, value);
 	if (ret < 0)
 		wl1271_warning("wl1271_op_set_rts_threshold failed: %d", ret);
 
-- 
cgit v1.2.3


From 521a4a23261354885c01bf75b42150629004ed83 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 18 Apr 2011 14:15:22 +0300
Subject: wl12xx: AP-mode - disable beacon filtering on start up

New AP-mode FWs filter external beacons by default. Disable this
filtering on start up so we can properly configure ERP protection.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/acx.c  | 25 +++++++++++++++++++++++++
 drivers/net/wireless/wl12xx/acx.h  | 10 +++++++++-
 drivers/net/wireless/wl12xx/init.c |  8 ++++++++
 3 files changed, 42 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
index 729f72a7b91..6860d7e9df7 100644
--- a/drivers/net/wireless/wl12xx/acx.c
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -1679,6 +1679,31 @@ out:
 	return ret;
 }
 
+int wl1271_acx_set_ap_beacon_filter(struct wl1271 *wl, bool enable)
+{
+	struct acx_ap_beacon_filter *acx = NULL;
+	int ret;
+
+	wl1271_debug(DEBUG_ACX, "acx set ap beacon filter: %d", enable);
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx)
+		return -ENOMEM;
+
+	acx->enable = enable ? 1 : 0;
+
+	ret = wl1271_cmd_configure(wl, ACX_AP_BEACON_FILTER_OPT,
+				   acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1271_warning("acx set ap beacon filter failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
+
 int wl1271_acx_fm_coex(struct wl1271 *wl)
 {
 	struct wl1271_acx_fm_coex *acx;
diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h
index 828367d6266..75338f9947c 100644
--- a/drivers/net/wireless/wl12xx/acx.h
+++ b/drivers/net/wireless/wl12xx/acx.h
@@ -303,7 +303,6 @@ struct acx_beacon_filter_option {
 	struct acx_header header;
 
 	u8 enable;
-
 	/*
 	 * The number of beacons without the unicast TIM
 	 * bit set that the firmware buffers before
@@ -1188,6 +1187,13 @@ struct wl1271_acx_inconnection_sta {
 	u8 padding1[2];
 } __packed;
 
+struct acx_ap_beacon_filter {
+	struct acx_header header;
+
+	u8 enable;
+	u8 pad[3];
+} __packed;
+
 /*
  * ACX_FM_COEX_CFG
  * set the FM co-existence parameters.
@@ -1265,6 +1271,7 @@ enum {
 	ACX_TID_CFG                 = 0x001A,
 	ACX_PS_RX_STREAMING         = 0x001B,
 	ACX_BEACON_FILTER_OPT       = 0x001F,
+	ACX_AP_BEACON_FILTER_OPT    = 0x0020,
 	ACX_NOISE_HIST              = 0x0021,
 	ACX_HDK_VERSION             = 0x0022, /* ??? */
 	ACX_PD_THRESHOLD            = 0x0023,
@@ -1388,6 +1395,7 @@ int wl1271_acx_ap_max_tx_retry(struct wl1271 *wl);
 int wl1271_acx_sta_max_tx_retry(struct wl1271 *wl);
 int wl1271_acx_config_ps(struct wl1271 *wl);
 int wl1271_acx_set_inconnection_sta(struct wl1271 *wl, u8 *addr);
+int wl1271_acx_set_ap_beacon_filter(struct wl1271 *wl, bool enable);
 int wl1271_acx_fm_coex(struct wl1271 *wl);
 
 #endif /* __WL1271_ACX_H__ */
diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
index 060ca31818e..e0de041e38f 100644
--- a/drivers/net/wireless/wl12xx/init.c
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -475,6 +475,14 @@ static int wl1271_ap_hw_init_post_mem(struct wl1271 *wl)
 	if (ret < 0)
 		return ret;
 
+	/*
+	 * when operating as AP we want to receive external beacons for
+	 * configuring ERP protection.
+	 */
+	ret = wl1271_acx_set_ap_beacon_filter(wl, false);
+	if (ret < 0)
+		return ret;
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From f482b76202f4ac0f62a77b0e55ac1a1cfe480e2b Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 18 Apr 2011 14:15:23 +0300
Subject: wl12xx: schedule recovery on command timeout

We use a long timeout (2 seconds) when sending commands to the FW.
When a command times out, it means the FW is stuck, and we should
commence recovery.

This should make recovery times shorter as we'll recover on the first
timeout indication.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/cmd.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c
index a9ffdd86f9b..d8596ae3a64 100644
--- a/drivers/net/wireless/wl12xx/cmd.c
+++ b/drivers/net/wireless/wl12xx/cmd.c
@@ -76,7 +76,7 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
 		if (time_after(jiffies, timeout)) {
 			wl1271_error("command complete timeout");
 			ret = -ETIMEDOUT;
-			goto out;
+			goto fail;
 		}
 
 		poll_count++;
@@ -96,14 +96,17 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
 	status = le16_to_cpu(cmd->status);
 	if (status != CMD_STATUS_SUCCESS) {
 		wl1271_error("command execute failure %d", status);
-		ieee80211_queue_work(wl->hw, &wl->recovery_work);
 		ret = -EIO;
+		goto fail;
 	}
 
 	wl1271_write32(wl, ACX_REG_INTERRUPT_ACK,
 		       WL1271_ACX_INTR_CMD_COMPLETE);
+	return 0;
 
-out:
+fail:
+	WARN_ON(1);
+	ieee80211_queue_work(wl->hw, &wl->recovery_work);
 	return ret;
 }
 
-- 
cgit v1.2.3


From 52dcaf577f3b6d878a337a44a99a122017c85ff6 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 18 Apr 2011 14:15:24 +0300
Subject: wl12xx: print firmware program counter during recovery

When performing recovery, print the firmware version and program
counter (by reading the SCR_PAD4 register). The value of the firmware
program counter during assert can be useful for debugging.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 81a0c8ed5a4..7b88dd2e85e 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1004,7 +1004,8 @@ static void wl1271_recovery_work(struct work_struct *work)
 	if (wl->state != WL1271_STATE_ON)
 		goto out;
 
-	wl1271_info("Hardware recovery in progress.");
+	wl1271_info("Hardware recovery in progress. FW ver: %s pc: 0x%x",
+		    wl->chip.fw_ver_str, wl1271_read32(wl, SCR_PAD4));
 
 	if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags))
 		ieee80211_connection_loss(wl->vif);
-- 
cgit v1.2.3


From 70f474241b3d5fb633635a2ce39ea9da4afeea6c Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 18 Apr 2011 14:15:25 +0300
Subject: wl12xx: AP-mode - overhaul rate policy configuration

Use the minimal rate configured in the basic rates set as the AP
broadcast and multicast rate. The minimal rate is used to ensure weak
links can still communicate.

When the basic rates contains at least one OFDM rate, configure all
unicast TX rates to OFDM only.

Unify rate configuration on initialization and on change notification
into a single function.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/acx.c  |  3 +-
 drivers/net/wireless/wl12xx/conf.h | 22 ++++--------
 drivers/net/wireless/wl12xx/init.c | 71 ++++++++++++++++++++++++++++----------
 drivers/net/wireless/wl12xx/init.h |  1 +
 drivers/net/wireless/wl12xx/main.c | 53 ++--------------------------
 5 files changed, 65 insertions(+), 85 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
index 6860d7e9df7..ec0156b3e27 100644
--- a/drivers/net/wireless/wl12xx/acx.c
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -841,7 +841,8 @@ int wl1271_acx_ap_rate_policy(struct wl1271 *wl, struct conf_tx_rate_class *c,
 	struct acx_ap_rate_policy *acx;
 	int ret = 0;
 
-	wl1271_debug(DEBUG_ACX, "acx ap rate policy");
+	wl1271_debug(DEBUG_ACX, "acx ap rate policy %d rates 0x%x",
+		     idx, c->enabled_rates);
 
 	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
 	if (!acx) {
diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index 2ffbe3e0601..c0045f0b8b4 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -540,6 +540,12 @@ struct conf_rx_settings {
 	CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS |      \
 	CONF_HW_BIT_RATE_54MBPS)
 
+#define CONF_TX_OFDM_RATES (CONF_HW_BIT_RATE_6MBPS |             \
+	CONF_HW_BIT_RATE_12MBPS | CONF_HW_BIT_RATE_24MBPS |      \
+	CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS |      \
+	CONF_HW_BIT_RATE_54MBPS)
+
+
 /*
  * Default rates for management traffic when operating in AP mode. This
  * should be configured according to the basic rate set of the AP
@@ -704,22 +710,6 @@ struct conf_tx_settings {
 	u8 ac_conf_count;
 	struct conf_tx_ac_category ac_conf[CONF_TX_MAX_AC_COUNT];
 
-	/*
-	 * Configuration for rate classes in AP-mode. These rate classes
-	 * are for the AC TX queues
-	 */
-	struct conf_tx_rate_class ap_rc_conf[CONF_TX_MAX_AC_COUNT];
-
-	/*
-	 * Management TX rate class for AP-mode.
-	 */
-	struct conf_tx_rate_class ap_mgmt_conf;
-
-	/*
-	 * Broadcast TX rate class for AP-mode.
-	 */
-	struct conf_tx_rate_class ap_bcst_conf;
-
 	/*
 	 * Allow this number of TX retries to a connected station/AP before an
 	 * event is triggered from FW.
diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
index e0de041e38f..5d0ecd2018b 100644
--- a/drivers/net/wireless/wl12xx/init.c
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -417,7 +417,7 @@ static int wl1271_sta_hw_init_post_mem(struct wl1271 *wl)
 
 static int wl1271_ap_hw_init(struct wl1271 *wl)
 {
-	int ret, i;
+	int ret;
 
 	ret = wl1271_ap_init_templates_config(wl);
 	if (ret < 0)
@@ -428,23 +428,7 @@ static int wl1271_ap_hw_init(struct wl1271 *wl)
 	if (ret < 0)
 		return ret;
 
-	/* Configure initial TX rate classes */
-	for (i = 0; i < wl->conf.tx.ac_conf_count; i++) {
-		ret = wl1271_acx_ap_rate_policy(wl,
-				&wl->conf.tx.ap_rc_conf[i], i);
-		if (ret < 0)
-			return ret;
-	}
-
-	ret = wl1271_acx_ap_rate_policy(wl,
-					&wl->conf.tx.ap_mgmt_conf,
-					ACX_TX_AP_MODE_MGMT_RATE);
-	if (ret < 0)
-		return ret;
-
-	ret = wl1271_acx_ap_rate_policy(wl,
-					&wl->conf.tx.ap_bcst_conf,
-					ACX_TX_AP_MODE_BCST_RATE);
+	ret = wl1271_init_ap_rates(wl);
 	if (ret < 0)
 		return ret;
 
@@ -486,6 +470,57 @@ static int wl1271_ap_hw_init_post_mem(struct wl1271 *wl)
 	return 0;
 }
 
+int wl1271_init_ap_rates(struct wl1271 *wl)
+{
+	int i, ret;
+	struct conf_tx_rate_class rc;
+	u32 supported_rates;
+
+	wl1271_debug(DEBUG_AP, "AP basic rate set: 0x%x", wl->basic_rate_set);
+
+	if (wl->basic_rate_set == 0)
+		return -EINVAL;
+
+	rc.enabled_rates = wl->basic_rate_set;
+	rc.long_retry_limit = 10;
+	rc.short_retry_limit = 10;
+	rc.aflags = 0;
+	ret = wl1271_acx_ap_rate_policy(wl, &rc, ACX_TX_AP_MODE_MGMT_RATE);
+	if (ret < 0)
+		return ret;
+
+	/* use the min basic rate for AP broadcast/multicast */
+	rc.enabled_rates = wl1271_tx_min_rate_get(wl);
+	rc.short_retry_limit = 10;
+	rc.long_retry_limit = 10;
+	rc.aflags = 0;
+	ret = wl1271_acx_ap_rate_policy(wl, &rc, ACX_TX_AP_MODE_BCST_RATE);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * If the basic rates contain OFDM rates, use OFDM only
+	 * rates for unicast TX as well. Else use all supported rates.
+	 */
+	if ((wl->basic_rate_set & CONF_TX_OFDM_RATES))
+		supported_rates = CONF_TX_OFDM_RATES;
+	else
+		supported_rates = CONF_TX_AP_ENABLED_RATES;
+
+	/* configure unicast TX rate classes */
+	for (i = 0; i < wl->conf.tx.ac_conf_count; i++) {
+		rc.enabled_rates = supported_rates;
+		rc.short_retry_limit = 10;
+		rc.long_retry_limit = 10;
+		rc.aflags = 0;
+		ret = wl1271_acx_ap_rate_policy(wl, &rc, i);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
 static void wl1271_check_ba_support(struct wl1271 *wl)
 {
 	/* validate FW cose ver x.x.x.50-60.x */
diff --git a/drivers/net/wireless/wl12xx/init.h b/drivers/net/wireless/wl12xx/init.h
index 4975270a91a..0dd2414a30d 100644
--- a/drivers/net/wireless/wl12xx/init.h
+++ b/drivers/net/wireless/wl12xx/init.h
@@ -33,5 +33,6 @@ int wl1271_init_pta(struct wl1271 *wl);
 int wl1271_init_energy_detection(struct wl1271 *wl);
 int wl1271_chip_specific_init(struct wl1271 *wl);
 int wl1271_hw_init(struct wl1271 *wl);
+int wl1271_init_ap_rates(struct wl1271 *wl);
 
 #endif
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 7b88dd2e85e..e9d4cf48ba3 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -209,44 +209,6 @@ static struct conf_drv_settings default_conf = {
 				.tx_op_limit = 1504,
 			},
 		},
-		.ap_rc_conf                  = {
-			[0] = {
-				.enabled_rates = CONF_TX_AP_ENABLED_RATES,
-				.short_retry_limit = 10,
-				.long_retry_limit = 10,
-				.aflags      = 0,
-			},
-			[1] = {
-				.enabled_rates = CONF_TX_AP_ENABLED_RATES,
-				.short_retry_limit = 10,
-				.long_retry_limit = 10,
-				.aflags      = 0,
-			},
-			[2] = {
-				.enabled_rates = CONF_TX_AP_ENABLED_RATES,
-				.short_retry_limit = 10,
-				.long_retry_limit = 10,
-				.aflags      = 0,
-			},
-			[3] = {
-				.enabled_rates = CONF_TX_AP_ENABLED_RATES,
-				.short_retry_limit = 10,
-				.long_retry_limit = 10,
-				.aflags      = 0,
-			},
-		},
-		.ap_mgmt_conf = {
-			.enabled_rates       = CONF_TX_AP_DEFAULT_MGMT_RATES,
-			.short_retry_limit   = 10,
-			.long_retry_limit    = 10,
-			.aflags              = 0,
-		},
-		.ap_bcst_conf = {
-			.enabled_rates       = CONF_HW_BIT_RATE_1MBPS,
-			.short_retry_limit   = 10,
-			.long_retry_limit    = 10,
-			.aflags              = 0,
-		},
 		.max_tx_retries = 100,
 		.ap_aging_period = 300,
 		.tid_conf_count = 4,
@@ -2532,22 +2494,13 @@ static void wl1271_bss_info_changed_ap(struct wl1271 *wl,
 
 	if ((changed & BSS_CHANGED_BASIC_RATES)) {
 		u32 rates = bss_conf->basic_rates;
-		struct conf_tx_rate_class mgmt_rc;
 
 		wl->basic_rate_set = wl1271_tx_enabled_rates_get(wl, rates);
 		wl->basic_rate = wl1271_tx_min_rate_get(wl);
-		wl1271_debug(DEBUG_AP, "basic rates: 0x%x",
-			     wl->basic_rate_set);
-
-		/* update the AP management rate policy with the new rates */
-		mgmt_rc.enabled_rates = wl->basic_rate_set;
-		mgmt_rc.long_retry_limit = 10;
-		mgmt_rc.short_retry_limit = 10;
-		mgmt_rc.aflags = 0;
-		ret = wl1271_acx_ap_rate_policy(wl, &mgmt_rc,
-						ACX_TX_AP_MODE_MGMT_RATE);
+
+		ret = wl1271_init_ap_rates(wl);
 		if (ret < 0) {
-			wl1271_error("AP mgmt policy change failed %d", ret);
+			wl1271_error("AP rate policy change failed %d", ret);
 			goto out;
 		}
 	}
-- 
cgit v1.2.3


From c45a85b5a3c0ca841a7ffc700bdece8ee01486be Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 18 Apr 2011 14:15:26 +0300
Subject: wl12xx: AP-mode - reconfigure templates after basic rates change

When there's a change in the basic rates of the AP, reconfigure relevant
templates with the new rates.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/init.c | 7 ++++++-
 drivers/net/wireless/wl12xx/init.h | 1 +
 drivers/net/wireless/wl12xx/main.c | 4 ++++
 3 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
index 5d0ecd2018b..b1242a6de27 100644
--- a/drivers/net/wireless/wl12xx/init.c
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -443,7 +443,7 @@ static int wl1271_ap_hw_init(struct wl1271 *wl)
 	return 0;
 }
 
-static int wl1271_ap_hw_init_post_mem(struct wl1271 *wl)
+int wl1271_ap_init_templates(struct wl1271 *wl)
 {
 	int ret;
 
@@ -470,6 +470,11 @@ static int wl1271_ap_hw_init_post_mem(struct wl1271 *wl)
 	return 0;
 }
 
+static int wl1271_ap_hw_init_post_mem(struct wl1271 *wl)
+{
+	return wl1271_ap_init_templates(wl);
+}
+
 int wl1271_init_ap_rates(struct wl1271 *wl)
 {
 	int i, ret;
diff --git a/drivers/net/wireless/wl12xx/init.h b/drivers/net/wireless/wl12xx/init.h
index 0dd2414a30d..3a3c230fd29 100644
--- a/drivers/net/wireless/wl12xx/init.h
+++ b/drivers/net/wireless/wl12xx/init.h
@@ -34,5 +34,6 @@ int wl1271_init_energy_detection(struct wl1271 *wl);
 int wl1271_chip_specific_init(struct wl1271 *wl);
 int wl1271_hw_init(struct wl1271 *wl);
 int wl1271_init_ap_rates(struct wl1271 *wl);
+int wl1271_ap_init_templates(struct wl1271 *wl);
 
 #endif
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index e9d4cf48ba3..433bc035741 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -2503,6 +2503,10 @@ static void wl1271_bss_info_changed_ap(struct wl1271 *wl,
 			wl1271_error("AP rate policy change failed %d", ret);
 			goto out;
 		}
+
+		ret = wl1271_ap_init_templates(wl);
+		if (ret < 0)
+			goto out;
 	}
 
 	ret = wl1271_bss_beacon_info_changed(wl, vif, bss_conf, changed);
-- 
cgit v1.2.3


From 2dc5a5c2c656b9029a0e635bb3a1cbcfbcb4ca5c Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 18 Apr 2011 14:15:27 +0300
Subject: wl12xx: add debugfs entry for starting recovery

This entry is useful for debugging the driver state machine during
recovery.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/debugfs.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/net/wireless/wl12xx/debugfs.c b/drivers/net/wireless/wl12xx/debugfs.c
index b17cff6cd75..a2b55e55671 100644
--- a/drivers/net/wireless/wl12xx/debugfs.c
+++ b/drivers/net/wireless/wl12xx/debugfs.c
@@ -291,6 +291,25 @@ static const struct file_operations gpio_power_ops = {
 	.llseek = default_llseek,
 };
 
+static ssize_t start_recovery_write(struct file *file,
+				    const char __user *user_buf,
+				    size_t count, loff_t *ppos)
+{
+	struct wl1271 *wl = file->private_data;
+
+	mutex_lock(&wl->mutex);
+	ieee80211_queue_work(wl->hw, &wl->recovery_work);
+	mutex_unlock(&wl->mutex);
+
+	return count;
+}
+
+static const struct file_operations start_recovery_ops = {
+	.write = start_recovery_write,
+	.open = wl1271_open_file_generic,
+	.llseek = default_llseek,
+};
+
 static ssize_t dtim_interval_read(struct file *file, char __user *user_buf,
 				  size_t count, loff_t *ppos)
 {
@@ -529,6 +548,7 @@ static int wl1271_debugfs_add_files(struct wl1271 *wl,
 	DEBUGFS_ADD(excessive_retries, rootdir);
 
 	DEBUGFS_ADD(gpio_power, rootdir);
+	DEBUGFS_ADD(start_recovery, rootdir);
 	DEBUGFS_ADD(dtim_interval, rootdir);
 	DEBUGFS_ADD(beacon_interval, rootdir);
 
-- 
cgit v1.2.3


From 7dece1c8e1044287287d44ac183a946333b55fc3 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 18 Apr 2011 14:15:28 +0300
Subject: wl12xx: fix race condition during recovery in AP mode

When operating as AP, the TX queues are not stopped when we start
recovery. mac80211 is notified only after the fact. When there is
pending TX, it will be queued even after the FW is down. This leads to
situations where the TX queues are stopped (because of the TX-watermark
mechanism), and are never woken up when we return from recovery.

Fix this by explicitly stopping the TX queues when before initiating
recovery.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 21 ++++++++++++++++-----
 drivers/net/wireless/wl12xx/tx.c   |  8 +++++---
 drivers/net/wireless/wl12xx/tx.h   |  2 +-
 3 files changed, 22 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 433bc035741..6dd42c98766 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -352,7 +352,8 @@ static struct conf_drv_settings default_conf = {
 	.hci_io_ds = HCI_IO_DS_6MA,
 };
 
-static void __wl1271_op_remove_interface(struct wl1271 *wl);
+static void __wl1271_op_remove_interface(struct wl1271 *wl,
+					 bool reset_tx_queues);
 static void wl1271_free_ap_keys(struct wl1271 *wl);
 
 
@@ -972,10 +973,19 @@ static void wl1271_recovery_work(struct work_struct *work)
 	if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags))
 		ieee80211_connection_loss(wl->vif);
 
+	/* Prevent spurious TX during FW restart */
+	ieee80211_stop_queues(wl->hw);
+
 	/* reboot the chipset */
-	__wl1271_op_remove_interface(wl);
+	__wl1271_op_remove_interface(wl, false);
 	ieee80211_restart_hw(wl->hw);
 
+	/*
+	 * Its safe to enable TX now - the queues are stopped after a request
+	 * to restart the HW.
+	 */
+	ieee80211_wake_queues(wl->hw);
+
 out:
 	mutex_unlock(&wl->mutex);
 }
@@ -1479,7 +1489,8 @@ out:
 	return ret;
 }
 
-static void __wl1271_op_remove_interface(struct wl1271 *wl)
+static void __wl1271_op_remove_interface(struct wl1271 *wl,
+					 bool reset_tx_queues)
 {
 	int i;
 
@@ -1525,7 +1536,7 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl)
 	mutex_lock(&wl->mutex);
 
 	/* let's notify MAC80211 about the remaining pending TX frames */
-	wl1271_tx_reset(wl);
+	wl1271_tx_reset(wl, reset_tx_queues);
 	wl1271_power_off(wl);
 
 	memset(wl->bssid, 0, ETH_ALEN);
@@ -1586,7 +1597,7 @@ static void wl1271_op_remove_interface(struct ieee80211_hw *hw,
 	 */
 	if (wl->vif) {
 		WARN_ON(wl->vif != vif);
-		__wl1271_op_remove_interface(wl);
+		__wl1271_op_remove_interface(wl, true);
 	}
 
 	mutex_unlock(&wl->mutex);
diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
index cc837bba546..ca3ab1c1ace 100644
--- a/drivers/net/wireless/wl12xx/tx.c
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -769,8 +769,8 @@ void wl1271_tx_reset_link_queues(struct wl1271 *wl, u8 hlid)
 	wl1271_handle_tx_low_watermark(wl);
 }
 
-/* caller must hold wl->mutex */
-void wl1271_tx_reset(struct wl1271 *wl)
+/* caller must hold wl->mutex and TX must be stopped */
+void wl1271_tx_reset(struct wl1271 *wl, bool reset_tx_queues)
 {
 	int i;
 	struct sk_buff *skb;
@@ -806,8 +806,10 @@ void wl1271_tx_reset(struct wl1271 *wl)
 	/*
 	 * Make sure the driver is at a consistent state, in case this
 	 * function is called from a context other than interface removal.
+	 * This call will always wake the TX queues.
 	 */
-	wl1271_handle_tx_low_watermark(wl);
+	if (reset_tx_queues)
+		wl1271_handle_tx_low_watermark(wl);
 
 	for (i = 0; i < ACX_TX_DESCRIPTORS; i++) {
 		if (wl->tx_frames[i] == NULL)
diff --git a/drivers/net/wireless/wl12xx/tx.h b/drivers/net/wireless/wl12xx/tx.h
index fc7835c4cf6..832f9258d67 100644
--- a/drivers/net/wireless/wl12xx/tx.h
+++ b/drivers/net/wireless/wl12xx/tx.h
@@ -185,7 +185,7 @@ static inline int wl1271_tx_get_queue(int queue)
 void wl1271_tx_work(struct work_struct *work);
 void wl1271_tx_work_locked(struct wl1271 *wl);
 void wl1271_tx_complete(struct wl1271 *wl);
-void wl1271_tx_reset(struct wl1271 *wl);
+void wl1271_tx_reset(struct wl1271 *wl, bool reset_tx_queues);
 void wl1271_tx_flush(struct wl1271 *wl);
 u8 wl1271_rate_to_idx(int rate, enum ieee80211_band band);
 u32 wl1271_tx_enabled_rates_get(struct wl1271 *wl, u32 rate_set);
-- 
cgit v1.2.3


From 2d66bee7fbd38d28e9ed12f45b8e9db8e6aa0c49 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 18 Apr 2011 14:15:29 +0300
Subject: wl12xx: export driver state to debugfs

By reading the "driver_state" debugfs value we get all the important
state information from the wl12xx driver. This helps testing and
debugging, particularly in situations where the driver seems "stuck".

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/debugfs.c | 87 +++++++++++++++++++++++++++++++++++
 1 file changed, 87 insertions(+)

diff --git a/drivers/net/wireless/wl12xx/debugfs.c b/drivers/net/wireless/wl12xx/debugfs.c
index a2b55e55671..b2f692babed 100644
--- a/drivers/net/wireless/wl12xx/debugfs.c
+++ b/drivers/net/wireless/wl12xx/debugfs.c
@@ -310,6 +310,92 @@ static const struct file_operations start_recovery_ops = {
 	.llseek = default_llseek,
 };
 
+static ssize_t driver_state_read(struct file *file, char __user *user_buf,
+				 size_t count, loff_t *ppos)
+{
+	struct wl1271 *wl = file->private_data;
+	int res = 0;
+	char buf[1024];
+
+	mutex_lock(&wl->mutex);
+
+#define DRIVER_STATE_PRINT(x, fmt)   \
+	(res += scnprintf(buf + res, sizeof(buf) - res,\
+			  #x " = " fmt "\n", wl->x))
+
+#define DRIVER_STATE_PRINT_LONG(x) DRIVER_STATE_PRINT(x, "%ld")
+#define DRIVER_STATE_PRINT_INT(x)  DRIVER_STATE_PRINT(x, "%d")
+#define DRIVER_STATE_PRINT_STR(x)  DRIVER_STATE_PRINT(x, "%s")
+#define DRIVER_STATE_PRINT_LHEX(x) DRIVER_STATE_PRINT(x, "0x%lx")
+#define DRIVER_STATE_PRINT_HEX(x)  DRIVER_STATE_PRINT(x, "0x%x")
+
+	DRIVER_STATE_PRINT_INT(tx_blocks_available);
+	DRIVER_STATE_PRINT_INT(tx_allocated_blocks);
+	DRIVER_STATE_PRINT_INT(tx_frames_cnt);
+	DRIVER_STATE_PRINT_LHEX(tx_frames_map[0]);
+	DRIVER_STATE_PRINT_INT(tx_queue_count);
+	DRIVER_STATE_PRINT_INT(tx_packets_count);
+	DRIVER_STATE_PRINT_INT(tx_results_count);
+	DRIVER_STATE_PRINT_LHEX(flags);
+	DRIVER_STATE_PRINT_INT(tx_blocks_freed[0]);
+	DRIVER_STATE_PRINT_INT(tx_blocks_freed[1]);
+	DRIVER_STATE_PRINT_INT(tx_blocks_freed[2]);
+	DRIVER_STATE_PRINT_INT(tx_blocks_freed[3]);
+	DRIVER_STATE_PRINT_INT(tx_security_last_seq);
+	DRIVER_STATE_PRINT_INT(rx_counter);
+	DRIVER_STATE_PRINT_INT(session_counter);
+	DRIVER_STATE_PRINT_INT(state);
+	DRIVER_STATE_PRINT_INT(bss_type);
+	DRIVER_STATE_PRINT_INT(channel);
+	DRIVER_STATE_PRINT_HEX(rate_set);
+	DRIVER_STATE_PRINT_HEX(basic_rate_set);
+	DRIVER_STATE_PRINT_HEX(basic_rate);
+	DRIVER_STATE_PRINT_INT(band);
+	DRIVER_STATE_PRINT_INT(beacon_int);
+	DRIVER_STATE_PRINT_INT(psm_entry_retry);
+	DRIVER_STATE_PRINT_INT(ps_poll_failures);
+	DRIVER_STATE_PRINT_HEX(filters);
+	DRIVER_STATE_PRINT_HEX(rx_config);
+	DRIVER_STATE_PRINT_HEX(rx_filter);
+	DRIVER_STATE_PRINT_INT(power_level);
+	DRIVER_STATE_PRINT_INT(rssi_thold);
+	DRIVER_STATE_PRINT_INT(last_rssi_event);
+	DRIVER_STATE_PRINT_INT(sg_enabled);
+	DRIVER_STATE_PRINT_INT(enable_11a);
+	DRIVER_STATE_PRINT_INT(noise);
+	DRIVER_STATE_PRINT_LHEX(ap_hlid_map[0]);
+	DRIVER_STATE_PRINT_INT(last_tx_hlid);
+	DRIVER_STATE_PRINT_INT(ba_support);
+	DRIVER_STATE_PRINT_HEX(ba_rx_bitmap);
+	DRIVER_STATE_PRINT_HEX(ap_fw_ps_map);
+	DRIVER_STATE_PRINT_LHEX(ap_ps_map);
+	DRIVER_STATE_PRINT_HEX(quirks);
+	DRIVER_STATE_PRINT_HEX(irq);
+	DRIVER_STATE_PRINT_HEX(ref_clock);
+	DRIVER_STATE_PRINT_HEX(tcxo_clock);
+	DRIVER_STATE_PRINT_HEX(hw_pg_ver);
+	DRIVER_STATE_PRINT_HEX(platform_quirks);
+	DRIVER_STATE_PRINT_HEX(chip.id);
+	DRIVER_STATE_PRINT_STR(chip.fw_ver_str);
+
+#undef DRIVER_STATE_PRINT_INT
+#undef DRIVER_STATE_PRINT_LONG
+#undef DRIVER_STATE_PRINT_HEX
+#undef DRIVER_STATE_PRINT_LHEX
+#undef DRIVER_STATE_PRINT_STR
+#undef DRIVER_STATE_PRINT
+
+	mutex_unlock(&wl->mutex);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, res);
+}
+
+static const struct file_operations driver_state_ops = {
+	.read = driver_state_read,
+	.open = wl1271_open_file_generic,
+	.llseek = default_llseek,
+};
+
 static ssize_t dtim_interval_read(struct file *file, char __user *user_buf,
 				  size_t count, loff_t *ppos)
 {
@@ -549,6 +635,7 @@ static int wl1271_debugfs_add_files(struct wl1271 *wl,
 
 	DEBUGFS_ADD(gpio_power, rootdir);
 	DEBUGFS_ADD(start_recovery, rootdir);
+	DEBUGFS_ADD(driver_state, rootdir);
 	DEBUGFS_ADD(dtim_interval, rootdir);
 	DEBUGFS_ADD(beacon_interval, rootdir);
 
-- 
cgit v1.2.3


From 25eaea30cd7b009ba2ca693708330d2f395cbc4d Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Mon, 2 May 2011 12:37:33 +0300
Subject: Revert "wl12xx: support FW TX inactivity triggers"

This reverts commit 47684808fd89d6809c0886e06f8ac324252499d8.

Conflicts:

	drivers/net/wireless/wl12xx/conf.h
	drivers/net/wireless/wl12xx/main.c
---
 drivers/net/wireless/wl12xx/acx.c    | 34 ++++----------------------
 drivers/net/wireless/wl12xx/acx.h    | 12 ++-------
 drivers/net/wireless/wl12xx/boot.c   |  6 ++---
 drivers/net/wireless/wl12xx/cmd.c    |  2 +-
 drivers/net/wireless/wl12xx/conf.h   | 12 ++-------
 drivers/net/wireless/wl12xx/event.c  | 47 ------------------------------------
 drivers/net/wireless/wl12xx/event.h  | 12 +--------
 drivers/net/wireless/wl12xx/init.c   |  6 +----
 drivers/net/wireless/wl12xx/main.c   | 10 ++------
 drivers/net/wireless/wl12xx/wl12xx.h |  1 +
 10 files changed, 17 insertions(+), 125 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
index ec0156b3e27..c6ee530e5bf 100644
--- a/drivers/net/wireless/wl12xx/acx.c
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -1577,46 +1577,22 @@ out:
 	return ret;
 }
 
-int wl1271_acx_ap_max_tx_retry(struct wl1271 *wl)
+int wl1271_acx_max_tx_retry(struct wl1271 *wl)
 {
-	struct wl1271_acx_ap_max_tx_retry *acx = NULL;
+	struct wl1271_acx_max_tx_retry *acx = NULL;
 	int ret;
 
-	wl1271_debug(DEBUG_ACX, "acx ap max tx retry");
+	wl1271_debug(DEBUG_ACX, "acx max tx retry");
 
 	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
 	if (!acx)
 		return -ENOMEM;
 
-	acx->max_tx_retry = cpu_to_le16(wl->conf.tx.max_tx_retries);
+	acx->max_tx_retry = cpu_to_le16(wl->conf.tx.ap_max_tx_retries);
 
 	ret = wl1271_cmd_configure(wl, ACX_MAX_TX_FAILURE, acx, sizeof(*acx));
 	if (ret < 0) {
-		wl1271_warning("acx ap max tx retry failed: %d", ret);
-		goto out;
-	}
-
-out:
-	kfree(acx);
-	return ret;
-}
-
-int wl1271_acx_sta_max_tx_retry(struct wl1271 *wl)
-{
-	struct wl1271_acx_sta_max_tx_retry *acx = NULL;
-	int ret;
-
-	wl1271_debug(DEBUG_ACX, "acx sta max tx retry");
-
-	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
-	if (!acx)
-		return -ENOMEM;
-
-	acx->max_tx_retry = wl->conf.tx.max_tx_retries;
-
-	ret = wl1271_cmd_configure(wl, ACX_CONS_TX_FAILURE, acx, sizeof(*acx));
-	if (ret < 0) {
-		wl1271_warning("acx sta max tx retry failed: %d", ret);
+		wl1271_warning("acx max tx retry failed: %d", ret);
 		goto out;
 	}
 
diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h
index 75338f9947c..9a895e3cc61 100644
--- a/drivers/net/wireless/wl12xx/acx.h
+++ b/drivers/net/wireless/wl12xx/acx.h
@@ -1153,7 +1153,7 @@ struct wl1271_acx_fw_tsf_information {
 	u8 padding[3];
 } __packed;
 
-struct wl1271_acx_ap_max_tx_retry {
+struct wl1271_acx_max_tx_retry {
 	struct acx_header header;
 
 	/*
@@ -1164,13 +1164,6 @@ struct wl1271_acx_ap_max_tx_retry {
 	u8 padding_1[2];
 } __packed;
 
-struct wl1271_acx_sta_max_tx_retry {
-	struct acx_header header;
-
-	u8 max_tx_retry;
-	u8 padding_1[3];
-} __packed;
-
 struct wl1271_acx_config_ps {
 	struct acx_header header;
 
@@ -1391,8 +1384,7 @@ int wl1271_acx_set_ba_session(struct wl1271 *wl,
 int wl1271_acx_set_ba_receiver_session(struct wl1271 *wl, u8 tid_index, u16 ssn,
 				       bool enable);
 int wl1271_acx_tsf_info(struct wl1271 *wl, u64 *mactime);
-int wl1271_acx_ap_max_tx_retry(struct wl1271 *wl);
-int wl1271_acx_sta_max_tx_retry(struct wl1271 *wl);
+int wl1271_acx_max_tx_retry(struct wl1271 *wl);
 int wl1271_acx_config_ps(struct wl1271 *wl);
 int wl1271_acx_set_inconnection_sta(struct wl1271 *wl, u8 *addr);
 int wl1271_acx_set_ap_beacon_filter(struct wl1271 *wl, bool enable);
diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c
index d263ebb6f97..2b0cf85788b 100644
--- a/drivers/net/wireless/wl12xx/boot.c
+++ b/drivers/net/wireless/wl12xx/boot.c
@@ -478,12 +478,10 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl)
 		DISCONNECT_EVENT_COMPLETE_ID |
 		RSSI_SNR_TRIGGER_0_EVENT_ID |
 		PSPOLL_DELIVERY_FAILURE_EVENT_ID |
-		SOFT_GEMINI_SENSE_EVENT_ID |
-		MAX_TX_RETRY_EVENT_ID;
+		SOFT_GEMINI_SENSE_EVENT_ID;
 
 	if (wl->bss_type == BSS_TYPE_AP_BSS)
-		wl->event_mask |= STA_REMOVE_COMPLETE_EVENT_ID |
-				  INACTIVE_STA_EVENT_ID;
+		wl->event_mask |= STA_REMOVE_COMPLETE_EVENT_ID;
 	else
 		wl->event_mask |= DUMMY_PACKET_EVENT_ID;
 
diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c
index d8596ae3a64..2116a376c3f 100644
--- a/drivers/net/wireless/wl12xx/cmd.c
+++ b/drivers/net/wireless/wl12xx/cmd.c
@@ -1080,7 +1080,7 @@ int wl1271_cmd_start_bss(struct wl1271 *wl)
 
 	memcpy(cmd->bssid, bss_conf->bssid, ETH_ALEN);
 
-	cmd->aging_period = cpu_to_le16(wl->conf.tx.ap_aging_period);
+	cmd->aging_period = cpu_to_le16(WL1271_AP_DEF_INACTIV_SEC);
 	cmd->bss_index = WL1271_AP_BSS_INDEX;
 	cmd->global_hlid = WL1271_AP_GLOBAL_HLID;
 	cmd->broadcast_hlid = WL1271_AP_BROADCAST_HLID;
diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index c0045f0b8b4..1f947368f9e 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -711,18 +711,10 @@ struct conf_tx_settings {
 	struct conf_tx_ac_category ac_conf[CONF_TX_MAX_AC_COUNT];
 
 	/*
-	 * Allow this number of TX retries to a connected station/AP before an
+	 * AP-mode - allow this number of TX retries to a station before an
 	 * event is triggered from FW.
-	 * In AP-mode the hlids of unreachable stations are given in the
-	 * "sta_tx_retry_exceeded" member in the event mailbox.
 	 */
-	u8 max_tx_retries;
-
-	/*
-	 * AP-mode - after this number of seconds a connected station is
-	 * considered inactive.
-	 */
-	u16 ap_aging_period;
+	u16 ap_max_tx_retries;
 
 	/*
 	 * Configuration for TID parameters.
diff --git a/drivers/net/wireless/wl12xx/event.c b/drivers/net/wireless/wl12xx/event.c
index d7be3aec6fc..ae69330e807 100644
--- a/drivers/net/wireless/wl12xx/event.c
+++ b/drivers/net/wireless/wl12xx/event.c
@@ -174,8 +174,6 @@ static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
 	u32 vector;
 	bool beacon_loss = false;
 	bool is_ap = (wl->bss_type == BSS_TYPE_AP_BSS);
-	bool disconnect_sta = false;
-	unsigned long sta_bitmap = 0;
 
 	wl1271_event_mbox_dump(mbox);
 
@@ -237,54 +235,9 @@ static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
 			wl1271_tx_dummy_packet(wl);
 	}
 
-	/*
-	 * "TX retries exceeded" has a different meaning according to mode.
-	 * In AP mode the offending station is disconnected. In STA mode we
-	 * report connection loss.
-	 */
-	if (vector & MAX_TX_RETRY_EVENT_ID) {
-		wl1271_debug(DEBUG_EVENT, "MAX_TX_RETRY_EVENT_ID");
-		if (is_ap) {
-			sta_bitmap |= le16_to_cpu(mbox->sta_tx_retry_exceeded);
-			disconnect_sta = true;
-		} else {
-			beacon_loss = true;
-		}
-	}
-
-	if ((vector & INACTIVE_STA_EVENT_ID) && is_ap) {
-		wl1271_debug(DEBUG_EVENT, "INACTIVE_STA_EVENT_ID");
-		sta_bitmap |= le16_to_cpu(mbox->sta_aging_status);
-		disconnect_sta = true;
-	}
-
 	if (wl->vif && beacon_loss)
 		ieee80211_connection_loss(wl->vif);
 
-	if (is_ap && disconnect_sta) {
-		u32 num_packets = wl->conf.tx.max_tx_retries;
-		struct ieee80211_sta *sta;
-		const u8 *addr;
-		int h;
-
-		for (h = find_first_bit(&sta_bitmap, AP_MAX_LINKS);
-		     h < AP_MAX_LINKS;
-		     h = find_next_bit(&sta_bitmap, AP_MAX_LINKS, h+1)) {
-			if (!wl1271_is_active_sta(wl, h))
-				continue;
-
-			addr = wl->links[h].addr;
-
-			rcu_read_lock();
-			sta = ieee80211_find_sta(wl->vif, addr);
-			if (sta) {
-				wl1271_debug(DEBUG_EVENT, "remove sta %d", h);
-				ieee80211_report_low_ack(sta, num_packets);
-			}
-			rcu_read_unlock();
-		}
-	}
-
 	return 0;
 }
 
diff --git a/drivers/net/wireless/wl12xx/event.h b/drivers/net/wireless/wl12xx/event.h
index 7ae5a082124..b6cf06e565a 100644
--- a/drivers/net/wireless/wl12xx/event.h
+++ b/drivers/net/wireless/wl12xx/event.h
@@ -58,16 +58,13 @@ enum {
 	CHANNEL_SWITCH_COMPLETE_EVENT_ID	 = BIT(17),
 	BSS_LOSE_EVENT_ID			 = BIT(18),
 	REGAINED_BSS_EVENT_ID			 = BIT(19),
-	MAX_TX_RETRY_EVENT_ID			 = BIT(20),
+	ROAMING_TRIGGER_MAX_TX_RETRY_EVENT_ID	 = BIT(20),
 	/* STA: dummy paket for dynamic mem blocks */
 	DUMMY_PACKET_EVENT_ID                    = BIT(21),
 	/* AP: STA remove complete */
 	STA_REMOVE_COMPLETE_EVENT_ID             = BIT(21),
 	SOFT_GEMINI_SENSE_EVENT_ID		 = BIT(22),
-	/* STA: SG prediction */
 	SOFT_GEMINI_PREDICTION_EVENT_ID		 = BIT(23),
-	/* AP: Inactive STA */
-	INACTIVE_STA_EVENT_ID			 = BIT(23),
 	SOFT_GEMINI_AVALANCHE_EVENT_ID		 = BIT(24),
 	PLT_RX_CALIBRATION_COMPLETE_EVENT_ID	 = BIT(25),
 	DBG_EVENT_ID				 = BIT(26),
@@ -122,11 +119,7 @@ struct event_mailbox {
 
 	/* AP FW only */
 	u8 hlid_removed;
-
-	/* a bitmap of hlids for stations that have been inactive too long */
 	__le16 sta_aging_status;
-
-	/* a bitmap of hlids for stations which didn't respond to TX */
 	__le16 sta_tx_retry_exceeded;
 
 	u8 reserved_5[24];
@@ -137,7 +130,4 @@ void wl1271_event_mbox_config(struct wl1271 *wl);
 int wl1271_event_handle(struct wl1271 *wl, u8 mbox);
 void wl1271_pspoll_work(struct work_struct *work);
 
-/* Functions from main.c */
-bool wl1271_is_active_sta(struct wl1271 *wl, u8 hlid);
-
 #endif
diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
index b1242a6de27..a8f4f156c05 100644
--- a/drivers/net/wireless/wl12xx/init.c
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -378,10 +378,6 @@ static int wl1271_sta_hw_init(struct wl1271 *wl)
 	if (ret < 0)
 		return ret;
 
-	ret = wl1271_acx_sta_max_tx_retry(wl);
-	if (ret < 0)
-		return ret;
-
 	ret = wl1271_acx_sta_mem_cfg(wl);
 	if (ret < 0)
 		return ret;
@@ -432,7 +428,7 @@ static int wl1271_ap_hw_init(struct wl1271 *wl)
 	if (ret < 0)
 		return ret;
 
-	ret = wl1271_acx_ap_max_tx_retry(wl);
+	ret = wl1271_acx_max_tx_retry(wl);
 	if (ret < 0)
 		return ret;
 
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 6dd42c98766..6dab6f0c91b 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -209,8 +209,7 @@ static struct conf_drv_settings default_conf = {
 				.tx_op_limit = 1504,
 			},
 		},
-		.max_tx_retries = 100,
-		.ap_aging_period = 300,
+		.ap_max_tx_retries = 100,
 		.tid_conf_count = 4,
 		.tid_conf = {
 			[CONF_TX_AC_BE] = {
@@ -3021,12 +3020,6 @@ static void wl1271_free_sta(struct wl1271 *wl, u8 hlid)
 	__clear_bit(hlid, (unsigned long *)&wl->ap_fw_ps_map);
 }
 
-bool wl1271_is_active_sta(struct wl1271 *wl, u8 hlid)
-{
-	int id = hlid - WL1271_AP_STA_HLID_START;
-	return test_bit(id, wl->ap_hlid_map);
-}
-
 static int wl1271_op_sta_add(struct ieee80211_hw *hw,
 			     struct ieee80211_vif *vif,
 			     struct ieee80211_sta *sta)
@@ -3632,6 +3625,7 @@ int wl1271_init_ieee80211(struct wl1271 *wl)
 		IEEE80211_HW_HAS_RATE_CONTROL |
 		IEEE80211_HW_CONNECTION_MONITOR |
 		IEEE80211_HW_SUPPORTS_CQM_RSSI |
+		IEEE80211_HW_REPORTS_TX_ACK_STATUS |
 		IEEE80211_HW_AP_LINK_PS;
 
 	wl->hw->wiphy->cipher_suites = cipher_suites;
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index f3de96212b9..b7601438eca 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -172,6 +172,7 @@ extern u32 wl12xx_debug_level;
 #define WL1271_PS_STA_MAX_BLOCKS  (2 * 9)
 
 #define WL1271_AP_BSS_INDEX        0
+#define WL1271_AP_DEF_INACTIV_SEC  300
 #define WL1271_AP_DEF_BEACON_EXP   20
 
 #define ACX_TX_DESCRIPTORS         32
-- 
cgit v1.2.3


From 9e4425fff9e0a0fb6a8c705777ed861f991f8747 Mon Sep 17 00:00:00 2001
From: "Gustavo F. Padovan" <padovan@profusion.mobi>
Date: Mon, 18 Apr 2011 18:38:43 -0300
Subject: Bluetooth: Add l2cap_add_psm() and l2cap_add_scid()

The intention is to get rid of the l2cap_sk_list usage inside
l2cap_core.c. l2cap_sk_list will soon be replaced by a list that does not
depend on socket usage.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
---
 include/net/bluetooth/l2cap.h |  4 ++++
 net/bluetooth/l2cap_core.c    | 44 +++++++++++++++++++++++++++++++++++++++++++
 net/bluetooth/l2cap_sock.c    | 44 +++++++++++--------------------------------
 3 files changed, 59 insertions(+), 33 deletions(-)

diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index c34b1c12636..f5f3c2cf8a3 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -458,6 +458,10 @@ void l2cap_do_send(struct l2cap_chan *chan, struct sk_buff *skb);
 void l2cap_streaming_send(struct l2cap_chan *chan);
 int l2cap_ertm_send(struct l2cap_chan *chan);
 
+struct sock *__l2cap_get_sock_by_addr(__le16 psm, bdaddr_t *src);
+int l2cap_add_psm(struct l2cap_chan *chan, bdaddr_t *src, __le16 psm);
+int l2cap_add_scid(struct l2cap_chan *chan,  __u16 scid);
+
 void l2cap_sock_set_timer(struct sock *sk, long timeout);
 void l2cap_sock_clear_timer(struct sock *sk);
 void __l2cap_sock_close(struct sock *sk, int reason);
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 338d8c3eeda..98ddd867cfd 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -135,6 +135,50 @@ static inline struct l2cap_chan *l2cap_get_chan_by_ident(struct l2cap_conn *conn
 	return c;
 }
 
+struct sock *__l2cap_get_sock_by_addr(__le16 psm, bdaddr_t *src)
+{
+	struct sock *sk;
+	struct hlist_node *node;
+	sk_for_each(sk, node, &l2cap_sk_list.head) {
+		struct l2cap_chan *chan = l2cap_pi(sk)->chan;
+
+		if (chan->sport == psm && !bacmp(&bt_sk(sk)->src, src))
+			goto found;
+	}
+
+	sk = NULL;
+found:
+	return sk;
+}
+
+int l2cap_add_psm(struct l2cap_chan *chan, bdaddr_t *src, __le16 psm)
+{
+	write_lock_bh(&l2cap_sk_list.lock);
+
+	if (__l2cap_get_sock_by_addr(psm, src)) {
+		write_unlock_bh(&l2cap_sk_list.lock);
+		return -EADDRINUSE;
+	}
+
+	chan->psm = psm;
+	chan->sport = psm;
+
+	write_unlock_bh(&l2cap_sk_list.lock);
+
+	return 0;
+}
+
+int l2cap_add_scid(struct l2cap_chan *chan,  __u16 scid)
+{
+	write_lock_bh(&l2cap_sk_list.lock);
+
+	chan->scid = scid;
+
+	write_unlock_bh(&l2cap_sk_list.lock);
+
+	return 0;
+}
+
 static u16 l2cap_alloc_cid(struct l2cap_conn *conn)
 {
 	u16 cid = L2CAP_CID_DYN_START;
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 09cc7a00534..2156dcecec0 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -78,22 +78,6 @@ void l2cap_sock_clear_timer(struct sock *sk)
 	sk_stop_timer(sk, &sk->sk_timer);
 }
 
-static struct sock *__l2cap_get_sock_by_addr(__le16 psm, bdaddr_t *src)
-{
-	struct sock *sk;
-	struct hlist_node *node;
-	sk_for_each(sk, node, &l2cap_sk_list.head) {
-		struct l2cap_chan *chan = l2cap_pi(sk)->chan;
-
-		if (chan->sport == psm && !bacmp(&bt_sk(sk)->src, src))
-			goto found;
-	}
-
-	sk = NULL;
-found:
-	return sk;
-}
-
 static int l2cap_sock_bind(struct socket *sock, struct sockaddr *addr, int alen)
 {
 	struct sock *sk = sock->sk;
@@ -136,26 +120,20 @@ static int l2cap_sock_bind(struct socket *sock, struct sockaddr *addr, int alen)
 		}
 	}
 
-	write_lock_bh(&l2cap_sk_list.lock);
+	if (la.l2_cid)
+		err = l2cap_add_scid(chan, la.l2_cid);
+	else
+		err = l2cap_add_psm(chan, &la.l2_bdaddr, la.l2_psm);
 
-	if (la.l2_psm && __l2cap_get_sock_by_addr(la.l2_psm, &la.l2_bdaddr)) {
-		err = -EADDRINUSE;
-	} else {
-		/* Save source address */
-		bacpy(&bt_sk(sk)->src, &la.l2_bdaddr);
-		chan->psm   = la.l2_psm;
-		chan->sport = la.l2_psm;
-		sk->sk_state = BT_BOUND;
-
-		if (__le16_to_cpu(la.l2_psm) == 0x0001 ||
-					__le16_to_cpu(la.l2_psm) == 0x0003)
-			chan->sec_level = BT_SECURITY_SDP;
-	}
+	if (err < 0)
+		goto done;
 
-	if (la.l2_cid)
-		chan->scid = la.l2_cid;
+	if (__le16_to_cpu(la.l2_psm) == 0x0001 ||
+				__le16_to_cpu(la.l2_psm) == 0x0003)
+		chan->sec_level = BT_SECURITY_SDP;
 
-	write_unlock_bh(&l2cap_sk_list.lock);
+	bacpy(&bt_sk(sk)->src, &la.l2_bdaddr);
+	sk->sk_state = BT_BOUND;
 
 done:
 	release_sock(sk);
-- 
cgit v1.2.3


From 73b2ec18532f45e9028ce4c7bc8d7f8818eabd2a Mon Sep 17 00:00:00 2001
From: "Gustavo F. Padovan" <padovan@profusion.mobi>
Date: Mon, 18 Apr 2011 19:36:44 -0300
Subject: Bluetooth: Handle psm == 0 case inside l2cap_add_psm()

When the user doesn't specify a psm we have the choose one for the
channel. Now we do this inside l2cap_add_psm().

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
---
 include/net/bluetooth/l2cap.h |  1 -
 net/bluetooth/l2cap_core.c    | 32 ++++++++++++++++++++++++--------
 net/bluetooth/l2cap_sock.c    | 22 ----------------------
 3 files changed, 24 insertions(+), 31 deletions(-)

diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index f5f3c2cf8a3..fb3f90eaaaa 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -458,7 +458,6 @@ void l2cap_do_send(struct l2cap_chan *chan, struct sk_buff *skb);
 void l2cap_streaming_send(struct l2cap_chan *chan);
 int l2cap_ertm_send(struct l2cap_chan *chan);
 
-struct sock *__l2cap_get_sock_by_addr(__le16 psm, bdaddr_t *src);
 int l2cap_add_psm(struct l2cap_chan *chan, bdaddr_t *src, __le16 psm);
 int l2cap_add_scid(struct l2cap_chan *chan,  __u16 scid);
 
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 98ddd867cfd..9e3f64f05d4 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -135,7 +135,7 @@ static inline struct l2cap_chan *l2cap_get_chan_by_ident(struct l2cap_conn *conn
 	return c;
 }
 
-struct sock *__l2cap_get_sock_by_addr(__le16 psm, bdaddr_t *src)
+static struct sock *__l2cap_get_sock_by_addr(__le16 psm, bdaddr_t *src)
 {
 	struct sock *sk;
 	struct hlist_node *node;
@@ -153,19 +153,35 @@ found:
 
 int l2cap_add_psm(struct l2cap_chan *chan, bdaddr_t *src, __le16 psm)
 {
+	int err;
+
 	write_lock_bh(&l2cap_sk_list.lock);
 
-	if (__l2cap_get_sock_by_addr(psm, src)) {
-		write_unlock_bh(&l2cap_sk_list.lock);
-		return -EADDRINUSE;
+	if (psm && __l2cap_get_sock_by_addr(psm, src)) {
+		err = -EADDRINUSE;
+		goto done;
 	}
 
-	chan->psm = psm;
-	chan->sport = psm;
+	if (psm) {
+		chan->psm = psm;
+		chan->sport = psm;
+		err = 0;
+	} else {
+		u16 p;
 
-	write_unlock_bh(&l2cap_sk_list.lock);
+		err = -EINVAL;
+		for (p = 0x1001; p < 0x1100; p += 2)
+			if (!__l2cap_get_sock_by_addr(cpu_to_le16(p), src)) {
+				chan->psm   = cpu_to_le16(p);
+				chan->sport = cpu_to_le16(p);
+				err = 0;
+				break;
+			}
+	}
 
-	return 0;
+done:
+	write_unlock_bh(&l2cap_sk_list.lock);
+	return err;
 }
 
 int l2cap_add_scid(struct l2cap_chan *chan,  __u16 scid)
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 2156dcecec0..aca99cd5377 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -256,28 +256,6 @@ static int l2cap_sock_listen(struct socket *sock, int backlog)
 		goto done;
 	}
 
-	if (!chan->psm && !chan->scid) {
-		bdaddr_t *src = &bt_sk(sk)->src;
-		u16 psm;
-
-		err = -EINVAL;
-
-		write_lock_bh(&l2cap_sk_list.lock);
-
-		for (psm = 0x1001; psm < 0x1100; psm += 2)
-			if (!__l2cap_get_sock_by_addr(cpu_to_le16(psm), src)) {
-				chan->psm   = cpu_to_le16(psm);
-				chan->sport = cpu_to_le16(psm);
-				err = 0;
-				break;
-			}
-
-		write_unlock_bh(&l2cap_sk_list.lock);
-
-		if (err < 0)
-			goto done;
-	}
-
 	sk->sk_max_ack_backlog = backlog;
 	sk->sk_ack_backlog = 0;
 	sk->sk_state = BT_LISTEN;
-- 
cgit v1.2.3


From 23691d75cdc69c3b285211b4d77746aa20a17d18 Mon Sep 17 00:00:00 2001
From: "Gustavo F. Padovan" <padovan@profusion.mobi>
Date: Wed, 27 Apr 2011 18:26:32 -0300
Subject: Bluetooth: Remove l2cap_sk_list

A new list was added to replace the socket based one. This new list
doesn't depent on sock and then fits better inside l2cap_core.c code.

It also rename l2cap_chan_alloc() to l2cap_chan_create() and
l2cap_chan_free() to l2cap_chan_destroy)

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
---
 include/net/bluetooth/l2cap.h |   6 +-
 net/bluetooth/l2cap_core.c    | 165 +++++++++++++++++++++++-------------------
 net/bluetooth/l2cap_sock.c    |   6 +-
 3 files changed, 95 insertions(+), 82 deletions(-)

diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index fb3f90eaaaa..d09c9b1118e 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -350,6 +350,7 @@ struct l2cap_chan {
 	struct list_head	srej_l;
 
 	struct list_head list;
+	struct list_head global_l;
 };
 
 struct l2cap_conn {
@@ -441,7 +442,6 @@ static inline int l2cap_tx_window_full(struct l2cap_chan *ch)
 #define __is_sar_start(ctrl)	(((ctrl) & L2CAP_CTRL_SAR) == L2CAP_SDU_START)
 
 extern int disable_ertm;
-extern struct bt_sock_list l2cap_sk_list;
 
 int l2cap_init_sockets(void);
 void l2cap_cleanup_sockets(void);
@@ -469,9 +469,9 @@ void l2cap_sock_init(struct sock *sk, struct sock *parent);
 struct sock *l2cap_sock_alloc(struct net *net, struct socket *sock,
 							int proto, gfp_t prio);
 void l2cap_send_disconn_req(struct l2cap_conn *conn, struct l2cap_chan *chan, int err);
-struct l2cap_chan *l2cap_chan_alloc(struct sock *sk);
+struct l2cap_chan *l2cap_chan_create(struct sock *sk);
 void l2cap_chan_del(struct l2cap_chan *chan, int err);
-void l2cap_chan_free(struct l2cap_chan *chan);
+void l2cap_chan_destroy(struct l2cap_chan *chan);
 int l2cap_chan_connect(struct l2cap_chan *chan);
 
 #endif /* __L2CAP_H */
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 9e3f64f05d4..d0769a83cb5 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -62,9 +62,8 @@ static u8 l2cap_fixed_chan[8] = { 0x02, };
 
 static struct workqueue_struct *_busy_wq;
 
-struct bt_sock_list l2cap_sk_list = {
-	.lock = __RW_LOCK_UNLOCKED(l2cap_sk_list.lock)
-};
+LIST_HEAD(chan_list);
+DEFINE_RWLOCK(chan_list_lock);
 
 static void l2cap_busy_work(struct work_struct *work);
 
@@ -135,29 +134,27 @@ static inline struct l2cap_chan *l2cap_get_chan_by_ident(struct l2cap_conn *conn
 	return c;
 }
 
-static struct sock *__l2cap_get_sock_by_addr(__le16 psm, bdaddr_t *src)
+static struct l2cap_chan *__l2cap_global_chan_by_addr(__le16 psm, bdaddr_t *src)
 {
-	struct sock *sk;
-	struct hlist_node *node;
-	sk_for_each(sk, node, &l2cap_sk_list.head) {
-		struct l2cap_chan *chan = l2cap_pi(sk)->chan;
+	struct l2cap_chan *c;
 
-		if (chan->sport == psm && !bacmp(&bt_sk(sk)->src, src))
+	list_for_each_entry(c, &chan_list, global_l) {
+		if (c->sport == psm && !bacmp(&bt_sk(c->sk)->src, src))
 			goto found;
 	}
 
-	sk = NULL;
+	c = NULL;
 found:
-	return sk;
+	return c;
 }
 
 int l2cap_add_psm(struct l2cap_chan *chan, bdaddr_t *src, __le16 psm)
 {
 	int err;
 
-	write_lock_bh(&l2cap_sk_list.lock);
+	write_lock_bh(&chan_list_lock);
 
-	if (psm && __l2cap_get_sock_by_addr(psm, src)) {
+	if (psm && __l2cap_global_chan_by_addr(psm, src)) {
 		err = -EADDRINUSE;
 		goto done;
 	}
@@ -171,7 +168,7 @@ int l2cap_add_psm(struct l2cap_chan *chan, bdaddr_t *src, __le16 psm)
 
 		err = -EINVAL;
 		for (p = 0x1001; p < 0x1100; p += 2)
-			if (!__l2cap_get_sock_by_addr(cpu_to_le16(p), src)) {
+			if (!__l2cap_global_chan_by_addr(cpu_to_le16(p), src)) {
 				chan->psm   = cpu_to_le16(p);
 				chan->sport = cpu_to_le16(p);
 				err = 0;
@@ -180,17 +177,17 @@ int l2cap_add_psm(struct l2cap_chan *chan, bdaddr_t *src, __le16 psm)
 	}
 
 done:
-	write_unlock_bh(&l2cap_sk_list.lock);
+	write_unlock_bh(&chan_list_lock);
 	return err;
 }
 
 int l2cap_add_scid(struct l2cap_chan *chan,  __u16 scid)
 {
-	write_lock_bh(&l2cap_sk_list.lock);
+	write_lock_bh(&chan_list_lock);
 
 	chan->scid = scid;
 
-	write_unlock_bh(&l2cap_sk_list.lock);
+	write_unlock_bh(&chan_list_lock);
 
 	return 0;
 }
@@ -207,7 +204,7 @@ static u16 l2cap_alloc_cid(struct l2cap_conn *conn)
 	return 0;
 }
 
-struct l2cap_chan *l2cap_chan_alloc(struct sock *sk)
+struct l2cap_chan *l2cap_chan_create(struct sock *sk)
 {
 	struct l2cap_chan *chan;
 
@@ -217,11 +214,19 @@ struct l2cap_chan *l2cap_chan_alloc(struct sock *sk)
 
 	chan->sk = sk;
 
+	write_lock_bh(&chan_list_lock);
+	list_add(&chan->global_l, &chan_list);
+	write_unlock_bh(&chan_list_lock);
+
 	return chan;
 }
 
-void l2cap_chan_free(struct l2cap_chan *chan)
+void l2cap_chan_destroy(struct l2cap_chan *chan)
 {
+	write_lock_bh(&chan_list_lock);
+	list_del(&chan->global_l);
+	write_unlock_bh(&chan_list_lock);
+
 	kfree(chan);
 }
 
@@ -651,48 +656,51 @@ static void l2cap_conn_start(struct l2cap_conn *conn)
 /* Find socket with cid and source bdaddr.
  * Returns closest match, locked.
  */
-static struct sock *l2cap_get_sock_by_scid(int state, __le16 cid, bdaddr_t *src)
+static struct l2cap_chan *l2cap_global_chan_by_scid(int state, __le16 cid, bdaddr_t *src)
 {
-	struct sock *sk = NULL, *sk1 = NULL;
-	struct hlist_node *node;
+	struct l2cap_chan *c, *c1 = NULL;
 
-	read_lock(&l2cap_sk_list.lock);
+	read_lock(&chan_list_lock);
 
-	sk_for_each(sk, node, &l2cap_sk_list.head) {
-		struct l2cap_chan *chan = l2cap_pi(sk)->chan;
+	list_for_each_entry(c, &chan_list, global_l) {
+		struct sock *sk = c->sk;
 
 		if (state && sk->sk_state != state)
 			continue;
 
-		if (chan->scid == cid) {
+		if (c->scid == cid) {
 			/* Exact match. */
-			if (!bacmp(&bt_sk(sk)->src, src))
-				break;
+			if (!bacmp(&bt_sk(sk)->src, src)) {
+				read_unlock(&chan_list_lock);
+				return c;
+			}
 
 			/* Closest match */
 			if (!bacmp(&bt_sk(sk)->src, BDADDR_ANY))
-				sk1 = sk;
+				c1 = c;
 		}
 	}
 
-	read_unlock(&l2cap_sk_list.lock);
+	read_unlock(&chan_list_lock);
 
-	return node ? sk : sk1;
+	return c1;
 }
 
 static void l2cap_le_conn_ready(struct l2cap_conn *conn)
 {
 	struct sock *parent, *sk;
-	struct l2cap_chan *chan;
+	struct l2cap_chan *chan, *pchan;
 
 	BT_DBG("");
 
 	/* Check if we have socket listening on cid */
-	parent = l2cap_get_sock_by_scid(BT_LISTEN, L2CAP_CID_LE_DATA,
+	pchan = l2cap_global_chan_by_scid(BT_LISTEN, L2CAP_CID_LE_DATA,
 							conn->src);
-	if (!parent)
+	if (!pchan)
 		return;
 
+	parent = pchan->sk;
+
 	bh_lock_sock(parent);
 
 	/* Check for backlog size */
@@ -705,7 +713,7 @@ static void l2cap_le_conn_ready(struct l2cap_conn *conn)
 	if (!sk)
 		goto clean;
 
-	chan = l2cap_chan_alloc(sk);
+	chan = l2cap_chan_create(sk);
 	if (!chan) {
 		l2cap_sock_kill(sk);
 		goto clean;
@@ -883,33 +891,34 @@ static inline void l2cap_chan_add(struct l2cap_conn *conn, struct l2cap_chan *ch
 /* Find socket with psm and source bdaddr.
  * Returns closest match.
  */
-static struct sock *l2cap_get_sock_by_psm(int state, __le16 psm, bdaddr_t *src)
+static struct l2cap_chan *l2cap_global_chan_by_psm(int state, __le16 psm, bdaddr_t *src)
 {
-	struct sock *sk = NULL, *sk1 = NULL;
-	struct hlist_node *node;
+	struct l2cap_chan *c, *c1 = NULL;
 
-	read_lock(&l2cap_sk_list.lock);
+	read_lock(&chan_list_lock);
 
-	sk_for_each(sk, node, &l2cap_sk_list.head) {
-		struct l2cap_chan *chan = l2cap_pi(sk)->chan;
+	list_for_each_entry(c, &chan_list, global_l) {
+		struct sock *sk = c->sk;
 
 		if (state && sk->sk_state != state)
 			continue;
 
-		if (chan->psm == psm) {
+		if (c->psm == psm) {
 			/* Exact match. */
-			if (!bacmp(&bt_sk(sk)->src, src))
-				break;
+			if (!bacmp(&bt_sk(sk)->src, src)) {
+				read_unlock_bh(&chan_list_lock);
+				return c;
+			}
 
 			/* Closest match */
 			if (!bacmp(&bt_sk(sk)->src, BDADDR_ANY))
-				sk1 = sk;
+				c1 = c;
 		}
 	}
 
-	read_unlock(&l2cap_sk_list.lock);
+	read_unlock(&chan_list_lock);
 
-	return node ? sk : sk1;
+	return c1;
 }
 
 int l2cap_chan_connect(struct l2cap_chan *chan)
@@ -2079,22 +2088,26 @@ static inline int l2cap_connect_req(struct l2cap_conn *conn, struct l2cap_cmd_hd
 {
 	struct l2cap_conn_req *req = (struct l2cap_conn_req *) data;
 	struct l2cap_conn_rsp rsp;
-	struct l2cap_chan *chan = NULL;
+	struct l2cap_chan *chan = NULL, *pchan;
 	struct sock *parent, *sk = NULL;
 	int result, status = L2CAP_CS_NO_INFO;
 
 	u16 dcid = 0, scid = __le16_to_cpu(req->scid);
 	__le16 psm = req->psm;
 
-	BT_DBG("psm 0x%2.2x scid 0x%4.4x", psm, scid);
+	BT_ERR("psm 0x%2.2x scid 0x%4.4x", psm, scid);
 
 	/* Check if we have socket listening on psm */
-	parent = l2cap_get_sock_by_psm(BT_LISTEN, psm, conn->src);
-	if (!parent) {
+	pchan = l2cap_global_chan_by_psm(BT_LISTEN, psm, conn->src);
+	if (!pchan) {
 		result = L2CAP_CR_BAD_PSM;
 		goto sendresp;
 	}
 
+	BT_ERR("%p 0x%2.2x", pchan, pchan->psm);
+
+	parent = pchan->sk;
+
 	bh_lock_sock(parent);
 
 	/* Check if the ACL is secure enough (if not SDP) */
@@ -2117,7 +2130,7 @@ static inline int l2cap_connect_req(struct l2cap_conn *conn, struct l2cap_cmd_hd
 	if (!sk)
 		goto response;
 
-	chan = l2cap_chan_alloc(sk);
+	chan = l2cap_chan_create(sk);
 	if (!chan) {
 		l2cap_sock_kill(sk);
 		goto response;
@@ -3745,11 +3758,14 @@ done:
 static inline int l2cap_conless_channel(struct l2cap_conn *conn, __le16 psm, struct sk_buff *skb)
 {
 	struct sock *sk;
+	struct l2cap_chan *chan;
 
-	sk = l2cap_get_sock_by_psm(0, psm, conn->src);
-	if (!sk)
+	chan = l2cap_global_chan_by_psm(0, psm, conn->src);
+	if (!chan)
 		goto drop;
 
+	sk = chan->sk;
+
 	bh_lock_sock(sk);
 
 	BT_DBG("sk %p, len %d", sk, skb->len);
@@ -3775,11 +3791,14 @@ done:
 static inline int l2cap_att_channel(struct l2cap_conn *conn, __le16 cid, struct sk_buff *skb)
 {
 	struct sock *sk;
+	struct l2cap_chan *chan;
 
-	sk = l2cap_get_sock_by_scid(0, cid, conn->src);
-	if (!sk)
+	chan = l2cap_global_chan_by_scid(0, cid, conn->src);
+	if (!chan)
 		goto drop;
 
+	sk = chan->sk;
+
 	bh_lock_sock(sk);
 
 	BT_DBG("sk %p, len %d", sk, skb->len);
@@ -3846,8 +3865,7 @@ static void l2cap_recv_frame(struct l2cap_conn *conn, struct sk_buff *skb)
 static int l2cap_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type)
 {
 	int exact = 0, lm1 = 0, lm2 = 0;
-	register struct sock *sk;
-	struct hlist_node *node;
+	struct l2cap_chan *c;
 
 	if (type != ACL_LINK)
 		return -EINVAL;
@@ -3855,25 +3873,25 @@ static int l2cap_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type)
 	BT_DBG("hdev %s, bdaddr %s", hdev->name, batostr(bdaddr));
 
 	/* Find listening sockets and check their link_mode */
-	read_lock(&l2cap_sk_list.lock);
-	sk_for_each(sk, node, &l2cap_sk_list.head) {
-		struct l2cap_chan *chan = l2cap_pi(sk)->chan;
+	read_lock(&chan_list_lock);
+	list_for_each_entry(c, &chan_list, global_l) {
+		struct sock *sk = c->sk;
 
 		if (sk->sk_state != BT_LISTEN)
 			continue;
 
 		if (!bacmp(&bt_sk(sk)->src, &hdev->bdaddr)) {
 			lm1 |= HCI_LM_ACCEPT;
-			if (chan->role_switch)
+			if (c->role_switch)
 				lm1 |= HCI_LM_MASTER;
 			exact++;
 		} else if (!bacmp(&bt_sk(sk)->src, BDADDR_ANY)) {
 			lm2 |= HCI_LM_ACCEPT;
-			if (chan->role_switch)
+			if (c->role_switch)
 				lm2 |= HCI_LM_MASTER;
 		}
 	}
-	read_unlock(&l2cap_sk_list.lock);
+	read_unlock(&chan_list_lock);
 
 	return exact ? lm1 : lm2;
 }
@@ -4126,25 +4144,22 @@ drop:
 
 static int l2cap_debugfs_show(struct seq_file *f, void *p)
 {
-	struct sock *sk;
-	struct hlist_node *node;
+	struct l2cap_chan *c;
 
-	read_lock_bh(&l2cap_sk_list.lock);
+	read_lock_bh(&chan_list_lock);
 
-	sk_for_each(sk, node, &l2cap_sk_list.head) {
-		struct l2cap_pinfo *pi = l2cap_pi(sk);
-		struct l2cap_chan *chan = pi->chan;
+	list_for_each_entry(c, &chan_list, global_l) {
+		struct sock *sk = c->sk;
 
 		seq_printf(f, "%s %s %d %d 0x%4.4x 0x%4.4x %d %d %d %d\n",
 					batostr(&bt_sk(sk)->src),
 					batostr(&bt_sk(sk)->dst),
-					sk->sk_state, __le16_to_cpu(chan->psm),
-					chan->scid, chan->dcid,
-					chan->imtu, chan->omtu, chan->sec_level,
-					chan->mode);
+					sk->sk_state, __le16_to_cpu(c->psm),
+					c->scid, c->dcid, c->imtu, c->omtu,
+					c->sec_level, c->mode);
 	}
 
-	read_unlock_bh(&l2cap_sk_list.lock);
+	read_unlock_bh(&chan_list_lock);
 
 	return 0;
 }
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index aca99cd5377..c98360d40b8 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -808,8 +808,7 @@ void l2cap_sock_kill(struct sock *sk)
 
 	/* Kill poor orphan */
 
-	l2cap_chan_free(l2cap_pi(sk)->chan);
-	bt_sock_unlink(&l2cap_sk_list, sk);
+	l2cap_chan_destroy(l2cap_pi(sk)->chan);
 	sock_set_flag(sk, SOCK_DEAD);
 	sock_put(sk);
 }
@@ -1025,7 +1024,6 @@ struct sock *l2cap_sock_alloc(struct net *net, struct socket *sock, int proto, g
 
 	setup_timer(&sk->sk_timer, l2cap_sock_timeout, (unsigned long) sk);
 
-	bt_sock_link(&l2cap_sk_list, sk);
 	return sk;
 }
 
@@ -1052,7 +1050,7 @@ static int l2cap_sock_create(struct net *net, struct socket *sock, int protocol,
 	if (!sk)
 		return -ENOMEM;
 
-	chan = l2cap_chan_alloc(sk);
+	chan = l2cap_chan_create(sk);
 	if (!chan) {
 		l2cap_sock_kill(sk);
 		return -ENOMEM;
-- 
cgit v1.2.3


From 2f6fc351e6e8c1b6a95140e733607e32bc3a4322 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanoharan@atheros.com>
Date: Thu, 28 Apr 2011 15:31:57 +0530
Subject: ath9k: Fix drain txq failure in flush

While draining the txq in flush, the buffers can be
added into the tx queue by tx_tasklet which leads to
unneccesary chip reset.

This issue was originially found with AR9382 and
running heavy uplink udp traffic with higher bandwidth
and doing frequent bgscan.

Cc: stable@kernel.org
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/main.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index c3dbf2661a3..efdafd28fab 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2261,6 +2261,7 @@ static void ath9k_flush(struct ieee80211_hw *hw, bool drop)
 	struct ath_softc *sc = hw->priv;
 	int timeout = 200; /* ms */
 	int i, j;
+	bool drain_txq;
 
 	mutex_lock(&sc->mutex);
 	cancel_delayed_work_sync(&sc->tx_complete_work);
@@ -2286,7 +2287,10 @@ static void ath9k_flush(struct ieee80211_hw *hw, bool drop)
 	}
 
 	ath9k_ps_wakeup(sc);
-	if (!ath_drain_all_txq(sc, false))
+	spin_lock_bh(&sc->sc_pcu_lock);
+	drain_txq = ath_drain_all_txq(sc, false);
+	spin_unlock_bh(&sc->sc_pcu_lock);
+	if (!drain_txq)
 		ath_reset(sc, false);
 	ath9k_ps_restore(sc);
 	ieee80211_wake_queues(hw);
-- 
cgit v1.2.3


From 470ab2a23b453518ac86937572b4531d8925ca55 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanoharan@atheros.com>
Date: Fri, 29 Apr 2011 14:48:45 +0530
Subject: mac80211: use wake_queue to restart trasmit

netif_tx_start_all_queues is used to allow the upper layer
to transmit frames but it does not restart transmission.
To restart the trasmission use netif_tx_wake_all_queues.
Not doing so, sometimes stalls the transmission and the
application has to be restarted to proceed further.

This issue was originally found while sending udp traffic
in higer bandwidth in open environment without bgscan.

Cc: stable@kernel.org
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/mlme.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index a41f234bd48..8d752b4d72c 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -781,7 +781,7 @@ void ieee80211_dynamic_ps_enable_work(struct work_struct *work)
 		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
 	}
 
-	netif_tx_start_all_queues(sdata->dev);
+	netif_tx_wake_all_queues(sdata->dev);
 }
 
 void ieee80211_dynamic_ps_timer(unsigned long data)
-- 
cgit v1.2.3


From 7e4b4eecedb3c6bd5f9fec479ef33ccc6ce72375 Mon Sep 17 00:00:00 2001
From: Daniel Drake <dsd@laptop.org>
Date: Mon, 2 May 2011 21:38:16 +0100
Subject: libertas: remove tx_timeout handler

As described at http://marc.info/?l=linux-netdev&m=130428493104730&w=2
libertas frequently generates spurious tx timeouts, because the tx
queue is brought down for extended periods during scanning. The net
layer takes a look and incorrectly assumes the queue has been down for
several seconds, and generates a tx_timeout.

One way to fix this is to bump the trans_start counter while scanning
so that the network layer knows that the device is still alive, but
I think the tx_timeout handler is implemented wrongly here and not of
any real use, so I vote to remove it.

As explained at http://marc.info/?l=linux-wireless&m=130430311115755&w=2
the watchdog is primarily meant to deal with lockup on the hardware TX
path (detected by the tx queue being stopped for an extended period of
time), but this is unlikely to happen with libertas. In this case, the tx
queue is stopped only while waiting for lbs_thread to send the queued frame
to the driver, and lbs_thread wakes up the queue immediately after, even
if the frame could not be sent correctly.

So, the only hardware-related possibility that this catches is if
hw_host_to_card hangs - this is something I have never seen. And if it
were to happen, nothing done by lbs_tx_timeout would actually wake up
lbs_thread any quicker than otherwise.

Removing this oddly-behaving spuriously-firing tx_timeout handler should
fix an occasional kernel crash during resume
(http://dev.laptop.org/ticket/10748)

Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/libertas/main.c | 23 -----------------------
 1 file changed, 23 deletions(-)

diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index ed57cf863b6..ae02e6b7bc4 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -149,28 +149,6 @@ static int lbs_eth_stop(struct net_device *dev)
 	return 0;
 }
 
-static void lbs_tx_timeout(struct net_device *dev)
-{
-	struct lbs_private *priv = dev->ml_priv;
-
-	lbs_deb_enter(LBS_DEB_TX);
-
-	lbs_pr_err("tx watch dog timeout\n");
-
-	dev->trans_start = jiffies; /* prevent tx timeout */
-
-	if (priv->currenttxskb)
-		lbs_send_tx_feedback(priv, 0);
-
-	/* XX: Shouldn't we also call into the hw-specific driver
-	   to kick it somehow? */
-	lbs_host_to_card_done(priv);
-
-	/* FIXME: reset the card */
-
-	lbs_deb_leave(LBS_DEB_TX);
-}
-
 void lbs_host_to_card_done(struct lbs_private *priv)
 {
 	unsigned long flags;
@@ -791,7 +769,6 @@ static const struct net_device_ops lbs_netdev_ops = {
 	.ndo_stop		= lbs_eth_stop,
 	.ndo_start_xmit		= lbs_hard_start_xmit,
 	.ndo_set_mac_address	= lbs_set_mac_address,
-	.ndo_tx_timeout 	= lbs_tx_timeout,
 	.ndo_set_multicast_list = lbs_set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
-- 
cgit v1.2.3


From cbe8c735f1af88037c3dab570f816e3a77896cc7 Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Date: Tue, 3 May 2011 13:14:06 +0530
Subject: ath9k_hw: remove aggregation protection mode

when aggregation protection mode is enabled the hardware needs
to send RTS/CTS for each HT frame. Currently its disabled so
remove the unused call backs.

Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9002_mac.c | 10 ----------
 drivers/net/wireless/ath/ath9k/ar9003_mac.c | 11 -----------
 drivers/net/wireless/ath/ath9k/ath9k.h      |  1 -
 drivers/net/wireless/ath/ath9k/hw-ops.h     |  6 ------
 drivers/net/wireless/ath/ath9k/hw.h         |  2 --
 drivers/net/wireless/ath/ath9k/main.c       |  3 ---
 drivers/net/wireless/ath/ath9k/xmit.c       |  5 +----
 7 files changed, 1 insertion(+), 37 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9002_mac.c b/drivers/net/wireless/ath/ath9k/ar9002_mac.c
index c338efbccf4..7a332f16b79 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_mac.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_mac.c
@@ -415,15 +415,6 @@ static void ar9002_hw_clr11n_aggr(struct ath_hw *ah, void *ds)
 	ads->ds_ctl1 &= (~AR_IsAggr & ~AR_MoreAggr);
 }
 
-static void ar9002_hw_set11n_burstduration(struct ath_hw *ah, void *ds,
-					   u32 burstDuration)
-{
-	struct ar5416_desc *ads = AR5416DESC(ds);
-
-	ads->ds_ctl2 &= ~AR_BurstDur;
-	ads->ds_ctl2 |= SM(burstDuration, AR_BurstDur);
-}
-
 void ath9k_hw_setuprxdesc(struct ath_hw *ah, struct ath_desc *ds,
 			  u32 size, u32 flags)
 {
@@ -456,6 +447,5 @@ void ar9002_hw_attach_mac_ops(struct ath_hw *ah)
 	ops->set11n_aggr_middle = ar9002_hw_set11n_aggr_middle;
 	ops->set11n_aggr_last = ar9002_hw_set11n_aggr_last;
 	ops->clr11n_aggr = ar9002_hw_clr11n_aggr;
-	ops->set11n_burstduration = ar9002_hw_set11n_burstduration;
 	ops->set_clrdmask = ar9002_hw_set_clrdmask;
 }
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mac.c b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
index c1264d60c49..be6adec33dd 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mac.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
@@ -484,16 +484,6 @@ static void ar9003_hw_clr11n_aggr(struct ath_hw *ah, void *ds)
 	ads->ctl12 &= (~AR_IsAggr & ~AR_MoreAggr);
 }
 
-static void ar9003_hw_set11n_burstduration(struct ath_hw *ah, void *ds,
-					   u32 burstDuration)
-{
-	struct ar9003_txc *ads = (struct ar9003_txc *) ds;
-
-	ads->ctl13 &= ~AR_BurstDur;
-	ads->ctl13 |= SM(burstDuration, AR_BurstDur);
-
-}
-
 void ar9003_hw_set_paprd_txdesc(struct ath_hw *ah, void *ds, u8 chains)
 {
 	struct ar9003_txc *ads = ds;
@@ -518,7 +508,6 @@ void ar9003_hw_attach_mac_ops(struct ath_hw *hw)
 	ops->set11n_aggr_middle = ar9003_hw_set11n_aggr_middle;
 	ops->set11n_aggr_last = ar9003_hw_set11n_aggr_last;
 	ops->clr11n_aggr = ar9003_hw_clr11n_aggr;
-	ops->set11n_burstduration = ar9003_hw_set11n_burstduration;
 	ops->set_clrdmask = ar9003_hw_set_clrdmask;
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 0312aa09180..1bffd156b15 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -62,7 +62,6 @@ struct ath_node;
 #define	ATH_TXQ_SETUP(sc, i)        ((sc)->tx.txqsetup & (1<<i))
 
 struct ath_config {
-	u32 ath_aggr_prot;
 	u16 txpowlimit;
 	u8 cabqReadytime;
 };
diff --git a/drivers/net/wireless/ath/ath9k/hw-ops.h b/drivers/net/wireless/ath/ath9k/hw-ops.h
index 9dd90a85ad6..99f8334d1df 100644
--- a/drivers/net/wireless/ath/ath9k/hw-ops.h
+++ b/drivers/net/wireless/ath/ath9k/hw-ops.h
@@ -116,12 +116,6 @@ static inline void ath9k_hw_clr11n_aggr(struct ath_hw *ah, void *ds)
 	ath9k_hw_ops(ah)->clr11n_aggr(ah, ds);
 }
 
-static inline void ath9k_hw_set11n_burstduration(struct ath_hw *ah, void *ds,
-						 u32 burstDuration)
-{
-	ath9k_hw_ops(ah)->set11n_burstduration(ah, ds, burstDuration);
-}
-
 static inline void ath9k_hw_set_clrdmask(struct ath_hw *ah, void *ds, bool val)
 {
 	ath9k_hw_ops(ah)->set_clrdmask(ah, ds, val);
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 34ed1bd0e85..b2248bba25a 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -628,8 +628,6 @@ struct ath_hw_ops {
 				   u32 numDelims);
 	void (*set11n_aggr_last)(struct ath_hw *ah, void *ds);
 	void (*clr11n_aggr)(struct ath_hw *ah, void *ds);
-	void (*set11n_burstduration)(struct ath_hw *ah, void *ds,
-				     u32 burstDuration);
 	void (*set_clrdmask)(struct ath_hw *ah, void *ds, bool val);
 };
 
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index efdafd28fab..3de115df916 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2039,9 +2039,6 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
 	if (changed & BSS_CHANGED_BSSID) {
 		ath9k_config_bss(sc, vif);
 
-		/* Set aggregation protection mode parameters */
-		sc->config.ath_aggr_prot = 0;
-
 		ath_dbg(common, ATH_DBG_CONFIG, "BSSID: %pM aid: 0x%x\n",
 			common->curbssid, common->curaid);
 	}
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 55960fa70dc..947d5b3b6e0 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1663,8 +1663,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf, int len)
 		rix = rates[i].idx;
 		series[i].Tries = rates[i].count;
 
-		if ((sc->config.ath_aggr_prot && bf_isaggr(bf)) ||
-		    (rates[i].flags & IEEE80211_TX_RC_USE_RTS_CTS)) {
+		    if (rates[i].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
 			series[i].RateFlags |= ATH9K_RATESERIES_RTS_CTS;
 			flags |= ATH9K_TXDESC_RTSENA;
 		} else if (rates[i].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
@@ -1733,8 +1732,6 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf, int len)
 				     !is_pspoll, ctsrate,
 				     0, series, 4, flags);
 
-	if (sc->config.ath_aggr_prot && flags)
-		ath9k_hw_set11n_burstduration(sc->sc_ah, bf->bf_desc, 8192);
 }
 
 static struct ath_buf *ath_tx_setup_buffer(struct ieee80211_hw *hw,
-- 
cgit v1.2.3


From 4c468fe559f7910b1c6b10d3d223943fdd1b653c Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Tue, 3 May 2011 11:53:07 +0300
Subject: mac80211: set TID of internal mgmt packets to 7

The queue mapping of internal mgmt packets is set to VO. Set the TID
value to match the queue mapping. Otherwise drivers that only look at
the TID might get confused.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/tx.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index e3e3aa173af..e1a39ed1ef5 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -2534,8 +2534,9 @@ void ieee80211_tx_skb(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb)
 	skb_set_network_header(skb, 0);
 	skb_set_transport_header(skb, 0);
 
-	/* send all internal mgmt frames on VO */
-	skb_set_queue_mapping(skb, 0);
+	/* Send all internal mgmt frames on VO. Accordingly set TID to 7. */
+	skb_set_queue_mapping(skb, IEEE80211_AC_VO);
+	skb->priority = 7;
 
 	/*
 	 * The other path calling ieee80211_xmit is from the tasklet,
-- 
cgit v1.2.3


From 1ddc286731134ad52a74b6956d9bc2a4369219a8 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanoharan@atheros.com>
Date: Tue, 3 May 2011 17:03:59 +0530
Subject: mac80211: Postpond ps timer if tx is stopped by others

Whenever the driver's queue depth reaches the max, the queues are
stopped by the driver till the driver can accept the frames.
At the mean time dynamic_ps_timer can be expired due to not
receiving packet from upper layer which could restart the transmission
at the end of ps work. Due to the mismatch with driver state,
mac80211 is unneccesarity buffering all the frames till the driver
wakes up the queue.

Check whether there is no transmit or the tx queues were stopped by some
reasons. If any of the queue was stopped, the postpond ps timer and
do not restart netif_tx.

Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/mlme.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 8d752b4d72c..4f6b2675e41 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -750,6 +750,8 @@ void ieee80211_dynamic_ps_enable_work(struct work_struct *work)
 			     dynamic_ps_enable_work);
 	struct ieee80211_sub_if_data *sdata = local->ps_sdata;
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	unsigned long flags;
+	int q;
 
 	/* can only happen when PS was just disabled anyway */
 	if (!sdata)
@@ -758,6 +760,24 @@ void ieee80211_dynamic_ps_enable_work(struct work_struct *work)
 	if (local->hw.conf.flags & IEEE80211_CONF_PS)
 		return;
 
+	/*
+	 * transmission can be stopped by others which leads to
+	 * dynamic_ps_timer expiry. Postpond the ps timer if it
+	 * is not the actual idle state.
+	 */
+	spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
+	for (q = 0; q < local->hw.queues; q++) {
+		if (local->queue_stop_reasons[q]) {
+			spin_unlock_irqrestore(&local->queue_stop_reason_lock,
+					       flags);
+			mod_timer(&local->dynamic_ps_timer, jiffies +
+				  msecs_to_jiffies(
+				  local->hw.conf.dynamic_ps_timeout));
+			return;
+		}
+	}
+	spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
+
 	if ((local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) &&
 	    (!(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED))) {
 		netif_tx_stop_all_queues(sdata->dev);
-- 
cgit v1.2.3


From e52dadb341c9c5ac25d6abd9216dd62752784f03 Mon Sep 17 00:00:00 2001
From: Chaoming Li <chaoming_li@realsil.com.cn>
Date: Tue, 3 May 2011 09:47:45 -0500
Subject: rtlwifi: rtl8192se: Merge def.h

Introduce routine def.h for rtl8192se.

Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8192se/def.h | 598 +++++++++++++++++++++++++++
 1 file changed, 598 insertions(+)
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8192se/def.h

diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/def.h b/drivers/net/wireless/rtlwifi/rtl8192se/def.h
new file mode 100644
index 00000000000..69828f2b3fa
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/def.h
@@ -0,0 +1,598 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+#ifndef __REALTEK_92S_DEF_H__
+#define __REALTEK_92S_DEF_H__
+
+#define RX_MPDU_QUEUE				0
+#define RX_CMD_QUEUE				1
+#define RX_MAX_QUEUE				2
+
+#define DESC92S_RATE1M				0x00
+#define DESC92S_RATE2M				0x01
+#define DESC92S_RATE5_5M			0x02
+#define DESC92S_RATE11M				0x03
+#define DESC92S_RATE6M				0x04
+#define DESC92S_RATE9M				0x05
+#define DESC92S_RATE12M				0x06
+#define DESC92S_RATE18M				0x07
+#define DESC92S_RATE24M				0x08
+#define DESC92S_RATE36M				0x09
+#define DESC92S_RATE48M				0x0a
+#define DESC92S_RATE54M				0x0b
+#define DESC92S_RATEMCS0			0x0c
+#define DESC92S_RATEMCS1			0x0d
+#define DESC92S_RATEMCS2			0x0e
+#define DESC92S_RATEMCS3			0x0f
+#define DESC92S_RATEMCS4			0x10
+#define DESC92S_RATEMCS5			0x11
+#define DESC92S_RATEMCS6			0x12
+#define DESC92S_RATEMCS7			0x13
+#define DESC92S_RATEMCS8			0x14
+#define DESC92S_RATEMCS9			0x15
+#define DESC92S_RATEMCS10			0x16
+#define DESC92S_RATEMCS11			0x17
+#define DESC92S_RATEMCS12			0x18
+#define DESC92S_RATEMCS13			0x19
+#define DESC92S_RATEMCS14			0x1a
+#define DESC92S_RATEMCS15			0x1b
+#define DESC92S_RATEMCS15_SG			0x1c
+#define DESC92S_RATEMCS32			0x20
+
+#define SHORT_SLOT_TIME				9
+#define NON_SHORT_SLOT_TIME			20
+
+/* Rx smooth factor */
+#define	RX_SMOOTH_FACTOR			20
+
+/* Queue Select Value in TxDesc */
+#define QSLT_BK					0x2
+#define QSLT_BE					0x0
+#define QSLT_VI					0x5
+#define QSLT_VO					0x6
+#define QSLT_BEACON				0x10
+#define QSLT_HIGH				0x11
+#define QSLT_MGNT				0x12
+#define QSLT_CMD				0x13
+
+#define	PHY_RSSI_SLID_WIN_MAX			100
+#define	PHY_LINKQUALITY_SLID_WIN_MAX		20
+#define	PHY_BEACON_RSSI_SLID_WIN_MAX		10
+
+/* Tx Desc */
+#define TX_DESC_SIZE_RTL8192S			(16 * 4)
+#define TX_CMDDESC_SIZE_RTL8192S		(16 * 4)
+
+/* Define a macro that takes a le32 word, converts it to host ordering,
+ * right shifts by a specified count, creates a mask of the specified
+ * bit count, and extracts that number of bits.
+ */
+
+#define SHIFT_AND_MASK_LE(__pdesc, __shift, __mask)		\
+	((le32_to_cpu(*(((__le32 *)(__pdesc)))) >> (__shift)) &	\
+	BIT_LEN_MASK_32(__mask))
+
+/* Define a macro that clears a bit field in an le32 word and
+ * sets the specified value into that bit field. The resulting
+ * value remains in le32 ordering; however, it is properly converted
+ * to host ordering for the clear and set operations before conversion
+ * back to le32.
+ */
+
+#define SET_BITS_OFFSET_LE(__pdesc, __shift, __len, __val)	\
+	(*(__le32 *)(__pdesc) =					\
+	(cpu_to_le32((le32_to_cpu(*((__le32 *)(__pdesc))) &	\
+	(~(BIT_OFFSET_LEN_MASK_32((__shift), __len)))) |	\
+	(((u32)(__val) & BIT_LEN_MASK_32(__len)) << (__shift)))));
+
+/* macros to read/write various fields in RX or TX descriptors */
+
+/* Dword 0 */
+#define SET_TX_DESC_PKT_SIZE(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc, 0, 16, __val)
+#define SET_TX_DESC_OFFSET(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc, 16, 8, __val)
+#define SET_TX_DESC_TYPE(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc, 24, 2, __val)
+#define SET_TX_DESC_LAST_SEG(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc, 26, 1, __val)
+#define SET_TX_DESC_FIRST_SEG(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc, 27, 1, __val)
+#define SET_TX_DESC_LINIP(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc, 28, 1, __val)
+#define SET_TX_DESC_AMSDU(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc, 29, 1, __val)
+#define SET_TX_DESC_GREEN_FIELD(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc, 30, 1, __val)
+#define SET_TX_DESC_OWN(__pdesc, __val)				\
+	SET_BITS_OFFSET_LE(__pdesc, 31, 1, __val)
+
+#define GET_TX_DESC_OWN(__pdesc)				\
+	SHIFT_AND_MASK_LE(__pdesc, 31, 1)
+
+/* Dword 1 */
+#define SET_TX_DESC_MACID(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 0, 5, __val)
+#define SET_TX_DESC_MORE_DATA(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 5, 1, __val)
+#define SET_TX_DESC_MORE_FRAG(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 6, 1, __val)
+#define SET_TX_DESC_PIFS(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 7, 1, __val)
+#define SET_TX_DESC_QUEUE_SEL(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 8, 5, __val)
+#define SET_TX_DESC_ACK_POLICY(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 13, 2, __val)
+#define SET_TX_DESC_NO_ACM(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 15, 1, __val)
+#define SET_TX_DESC_NON_QOS(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 16, 1, __val)
+#define SET_TX_DESC_KEY_ID(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 17, 2, __val)
+#define SET_TX_DESC_OUI(__pdesc, __val)				\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 19, 1, __val)
+#define SET_TX_DESC_PKT_TYPE(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 20, 1, __val)
+#define SET_TX_DESC_EN_DESC_ID(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 21, 1, __val)
+#define SET_TX_DESC_SEC_TYPE(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 22, 2, __val)
+#define SET_TX_DESC_WDS(__pdesc, __val)				\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 24, 1, __val)
+#define SET_TX_DESC_HTC(__pdesc, __val)				\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 25, 1, __val)
+#define SET_TX_DESC_PKT_OFFSET(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 26, 5, __val)
+#define SET_TX_DESC_HWPC(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 27, 1, __val)
+
+/* Dword 2 */
+#define SET_TX_DESC_DATA_RETRY_LIMIT(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 8, 0, 6, __val)
+#define SET_TX_DESC_RETRY_LIMIT_ENABLE(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 8, 6, 1, __val)
+#define SET_TX_DESC_TSFL(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 8, 7, 5, __val)
+#define SET_TX_DESC_RTS_RETRY_COUNT(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 8, 12, 6, __val)
+#define SET_TX_DESC_DATA_RETRY_COUNT(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 8, 18, 6, __val)
+#define	SET_TX_DESC_RSVD_MACID(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(((__pdesc) + 8), 24, 5, __val)
+#define SET_TX_DESC_AGG_ENABLE(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 8, 29, 1, __val)
+#define SET_TX_DESC_AGG_BREAK(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 8, 30, 1, __val)
+#define SET_TX_DESC_OWN_MAC(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 8, 31, 1, __val)
+
+/* Dword 3 */
+#define SET_TX_DESC_NEXT_HEAP_PAGE(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 12, 0, 8, __val)
+#define SET_TX_DESC_TAIL_PAGE(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 12, 8, 8, __val)
+#define SET_TX_DESC_SEQ(__pdesc, __val)				\
+	SET_BITS_OFFSET_LE(__pdesc + 12, 16, 12, __val)
+#define SET_TX_DESC_FRAG(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 12, 28, 4, __val)
+
+/* Dword 4 */
+#define SET_TX_DESC_RTS_RATE(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 16, 0, 6, __val)
+#define SET_TX_DESC_DISABLE_RTS_FB(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 16, 6, 1, __val)
+#define SET_TX_DESC_RTS_RATE_FB_LIMIT(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 16, 7, 4, __val)
+#define SET_TX_DESC_CTS_ENABLE(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 16, 11, 1, __val)
+#define SET_TX_DESC_RTS_ENABLE(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 16, 12, 1, __val)
+#define SET_TX_DESC_RA_BRSR_ID(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 16, 13, 3, __val)
+#define SET_TX_DESC_TXHT(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 16, 16, 1, __val)
+#define SET_TX_DESC_TX_SHORT(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 16, 17, 1, __val)
+#define SET_TX_DESC_TX_BANDWIDTH(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 16, 18, 1, __val)
+#define SET_TX_DESC_TX_SUB_CARRIER(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 16, 19, 2, __val)
+#define SET_TX_DESC_TX_STBC(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 16, 21, 2, __val)
+#define SET_TX_DESC_TX_REVERSE_DIRECTION(__pdesc, __val)	\
+	SET_BITS_OFFSET_LE(__pdesc + 16, 23, 1, __val)
+#define SET_TX_DESC_RTS_HT(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 16, 24, 1, __val)
+#define SET_TX_DESC_RTS_SHORT(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 16, 25, 1, __val)
+#define SET_TX_DESC_RTS_BANDWIDTH(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 16, 26, 1, __val)
+#define SET_TX_DESC_RTS_SUB_CARRIER(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 16, 27, 2, __val)
+#define SET_TX_DESC_RTS_STBC(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 16, 29, 2, __val)
+#define SET_TX_DESC_USER_RATE(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 16, 31, 1, __val)
+
+/* Dword 5 */
+#define SET_TX_DESC_PACKET_ID(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 20, 0, 9, __val)
+#define SET_TX_DESC_TX_RATE(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 20, 9, 6, __val)
+#define SET_TX_DESC_DISABLE_FB(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 20, 15, 1, __val)
+#define SET_TX_DESC_DATA_RATE_FB_LIMIT(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 20, 16, 5, __val)
+#define SET_TX_DESC_TX_AGC(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 20, 21, 11, __val)
+
+/* Dword 6 */
+#define SET_TX_DESC_IP_CHECK_SUM(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 24, 0, 16, __val)
+#define SET_TX_DESC_TCP_CHECK_SUM(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 24, 16, 16, __val)
+
+/* Dword 7 */
+#define SET_TX_DESC_TX_BUFFER_SIZE(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 28, 0, 16, __val)
+#define SET_TX_DESC_IP_HEADER_OFFSET(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 28, 16, 8, __val)
+#define SET_TX_DESC_TCP_ENABLE(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 28, 31, 1, __val)
+
+/* Dword 8 */
+#define SET_TX_DESC_TX_BUFFER_ADDRESS(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 32, 0, 32, __val)
+#define GET_TX_DESC_TX_BUFFER_ADDRESS(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc + 32, 0, 32)
+
+/* Dword 9 */
+#define SET_TX_DESC_NEXT_DESC_ADDRESS(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 36, 0, 32, __val)
+
+/* Because the PCI Tx descriptors are chaied at the
+ * initialization and all the NextDescAddresses in
+ * these descriptors cannot not be cleared (,or
+ * driver/HW cannot find the next descriptor), the
+ * offset 36 (NextDescAddresses) is reserved when
+ * the desc is cleared. */
+#define	TX_DESC_NEXT_DESC_OFFSET			36
+#define CLEAR_PCI_TX_DESC_CONTENT(__pdesc, _size)		\
+do {								\
+	if (_size > TX_DESC_NEXT_DESC_OFFSET)			\
+		memset(__pdesc, 0, TX_DESC_NEXT_DESC_OFFSET);	\
+	else							\
+		memset(__pdesc, 0, _size);			\
+} while (0);
+
+/* Rx Desc */
+#define RX_STATUS_DESC_SIZE				24
+#define RX_DRV_INFO_SIZE_UNIT				8
+
+/* DWORD 0 */
+#define SET_RX_STATUS_DESC_PKT_LEN(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc, 0, 14, __val)
+#define SET_RX_STATUS_DESC_CRC32(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc, 14, 1, __val)
+#define SET_RX_STATUS_DESC_ICV(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc, 15, 1, __val)
+#define SET_RX_STATUS_DESC_DRVINFO_SIZE(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc, 16, 4, __val)
+#define SET_RX_STATUS_DESC_SECURITY(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc, 20, 3, __val)
+#define SET_RX_STATUS_DESC_QOS(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc, 23, 1, __val)
+#define SET_RX_STATUS_DESC_SHIFT(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc, 24, 2, __val)
+#define SET_RX_STATUS_DESC_PHY_STATUS(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc, 26, 1, __val)
+#define SET_RX_STATUS_DESC_SWDEC(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc, 27, 1, __val)
+#define SET_RX_STATUS_DESC_LAST_SEG(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc, 28, 1, __val)
+#define SET_RX_STATUS_DESC_FIRST_SEG(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc, 29, 1, __val)
+#define SET_RX_STATUS_DESC_EOR(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc, 30, 1, __val)
+#define SET_RX_STATUS_DESC_OWN(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc, 31, 1, __val)
+
+#define GET_RX_STATUS_DESC_PKT_LEN(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc, 0, 14)
+#define GET_RX_STATUS_DESC_CRC32(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc, 14, 1)
+#define GET_RX_STATUS_DESC_ICV(__pdesc)				\
+	SHIFT_AND_MASK_LE(__pdesc, 15, 1)
+#define GET_RX_STATUS_DESC_DRVINFO_SIZE(__pdesc)		\
+	SHIFT_AND_MASK_LE(__pdesc, 16, 4)
+#define GET_RX_STATUS_DESC_SECURITY(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc, 20, 3)
+#define GET_RX_STATUS_DESC_QOS(__pdesc)				\
+	SHIFT_AND_MASK_LE(__pdesc, 23, 1)
+#define GET_RX_STATUS_DESC_SHIFT(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc, 24, 2)
+#define GET_RX_STATUS_DESC_PHY_STATUS(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc, 26, 1)
+#define GET_RX_STATUS_DESC_SWDEC(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc, 27, 1)
+#define GET_RX_STATUS_DESC_LAST_SEG(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc, 28, 1)
+#define GET_RX_STATUS_DESC_FIRST_SEG(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc, 29, 1)
+#define GET_RX_STATUS_DESC_EOR(__pdesc)				\
+	SHIFT_AND_MASK_LE(__pdesc, 30, 1)
+#define GET_RX_STATUS_DESC_OWN(__pdesc)				\
+	SHIFT_AND_MASK_LE(__pdesc, 31, 1)
+
+/* DWORD 1 */
+#define SET_RX_STATUS_DESC_MACID(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 0, 5, __val)
+#define SET_RX_STATUS_DESC_TID(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 5, 4, __val)
+#define SET_RX_STATUS_DESC_PAGGR(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 14, 1, __val)
+#define SET_RX_STATUS_DESC_FAGGR(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 15, 1, __val)
+#define SET_RX_STATUS_DESC_A1_FIT(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 16, 4, __val)
+#define SET_RX_STATUS_DESC_A2_FIT(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 20, 4, __val)
+#define SET_RX_STATUS_DESC_PAM(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 24, 1, __val)
+#define SET_RX_STATUS_DESC_PWR(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 25, 1, __val)
+#define SET_RX_STATUS_DESC_MOREDATA(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 26, 1, __val)
+#define SET_RX_STATUS_DESC_MOREFRAG(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 27, 1, __val)
+#define SET_RX_STATUS_DESC_TYPE(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 28, 2, __val)
+#define SET_RX_STATUS_DESC_MC(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 30, 1, __val)
+#define SET_RX_STATUS_DESC_BC(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 4, 31, 1, __val)
+
+#define GET_RX_STATUS_DEC_MACID(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc + 4, 0, 5)
+#define GET_RX_STATUS_DESC_TID(__pdesc)				\
+	SHIFT_AND_MASK_LE(__pdesc + 4, 5, 4)
+#define GET_RX_STATUS_DESC_PAGGR(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc + 4, 14, 1)
+#define GET_RX_STATUS_DESC_FAGGR(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc + 4, 15, 1)
+#define GET_RX_STATUS_DESC_A1_FIT(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc + 4, 16, 4)
+#define GET_RX_STATUS_DESC_A2_FIT(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc + 4, 20, 4)
+#define GET_RX_STATUS_DESC_PAM(__pdesc)				\
+	SHIFT_AND_MASK_LE(__pdesc + 4, 24, 1)
+#define GET_RX_STATUS_DESC_PWR(__pdesc)				\
+	SHIFT_AND_MASK_LE(__pdesc + 4, 25, 1)
+#define GET_RX_STATUS_DESC_MORE_DATA(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc + 4, 26, 1)
+#define GET_RX_STATUS_DESC_MORE_FRAG(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc + 4, 27, 1)
+#define GET_RX_STATUS_DESC_TYPE(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc + 4, 28, 2)
+#define GET_RX_STATUS_DESC_MC(__pdesc)				\
+	SHIFT_AND_MASK_LE(__pdesc + 4, 30, 1)
+#define GET_RX_STATUS_DESC_BC(__pdesc)				\
+	SHIFT_AND_MASK_LE(__pdesc + 4, 31, 1)
+
+/* DWORD 2 */
+#define SET_RX_STATUS_DESC_SEQ(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 8, 0, 12, __val)
+#define SET_RX_STATUS_DESC_FRAG(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 8, 12, 4, __val)
+#define SET_RX_STATUS_DESC_NEXT_PKTLEN(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 8, 16, 8, __val)
+#define SET_RX_STATUS_DESC_NEXT_IND(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 8, 30, 1, __val)
+
+#define GET_RX_STATUS_DESC_SEQ(__pdesc)				\
+	SHIFT_AND_MASK_LE(__pdesc + 8, 0, 12)
+#define GET_RX_STATUS_DESC_FRAG(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc + 8, 12, 4)
+#define GET_RX_STATUS_DESC_NEXT_PKTLEN(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc + 8, 16, 8)
+#define GET_RX_STATUS_DESC_NEXT_IND(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc + 8, 30, 1)
+
+/* DWORD 3 */
+#define SET_RX_STATUS_DESC_RX_MCS(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 12, 0, 6, __val)
+#define SET_RX_STATUS_DESC_RX_HT(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 12, 6, 1, __val)
+#define SET_RX_STATUS_DESC_AMSDU(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 12, 7, 1, __val)
+#define SET_RX_STATUS_DESC_SPLCP(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 12, 8, 1, __val)
+#define SET_RX_STATUS_DESC_BW(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 12, 9, 1, __val)
+#define SET_RX_STATUS_DESC_HTC(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 12, 10, 1, __val)
+#define SET_RX_STATUS_DESC_TCP_CHK_RPT(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 12, 11, 1, __val)
+#define SET_RX_STATUS_DESC_IP_CHK_RPT(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 12, 12, 1, __val)
+#define SET_RX_STATUS_DESC_TCP_CHK_VALID(__pdesc, __val)	\
+	SET_BITS_OFFSET_LE(__pdesc + 12, 13, 1, __val)
+#define SET_RX_STATUS_DESC_HWPC_ERR(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 12, 14, 1, __val)
+#define SET_RX_STATUS_DESC_HWPC_IND(__pdesc, __val)		\
+	SET_BITS_OFFSET_LE(__pdesc + 12, 15, 1, __val)
+#define SET_RX_STATUS_DESC_IV0(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 12, 16, 16, __val)
+
+#define GET_RX_STATUS_DESC_RX_MCS(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc + 12, 0, 6)
+#define GET_RX_STATUS_DESC_RX_HT(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc + 12, 6, 1)
+#define GET_RX_STATUS_DESC_AMSDU(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc + 12, 7, 1)
+#define GET_RX_STATUS_DESC_SPLCP(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc + 12, 8, 1)
+#define GET_RX_STATUS_DESC_BW(__pdesc)				\
+	SHIFT_AND_MASK_LE(__pdesc + 12, 9, 1)
+#define GET_RX_STATUS_DESC_HTC(__pdesc)				\
+	SHIFT_AND_MASK_LE(__pdesc + 12, 10, 1)
+#define GET_RX_STATUS_DESC_TCP_CHK_RPT(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc + 12, 11, 1)
+#define GET_RX_STATUS_DESC_IP_CHK_RPT(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc + 12, 12, 1)
+#define GET_RX_STATUS_DESC_TCP_CHK_VALID(__pdesc)		\
+	SHIFT_AND_MASK_LE(__pdesc + 12, 13, 1)
+#define GET_RX_STATUS_DESC_HWPC_ERR(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc + 12, 14, 1)
+#define GET_RX_STATUS_DESC_HWPC_IND(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc + 12, 15, 1)
+#define GET_RX_STATUS_DESC_IV0(__pdesc)				\
+	SHIFT_AND_MASK_LE(__pdesc + 12, 16, 16)
+
+/* DWORD 4 */
+#define SET_RX_STATUS_DESC_IV1(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 16, 0, 32, __val)
+#define GET_RX_STATUS_DESC_IV1(__pdesc)				\
+	SHIFT_AND_MASK_LE(__pdesc + 16, 0, 32)
+
+/* DWORD 5 */
+#define SET_RX_STATUS_DESC_TSFL(__pdesc, __val)			\
+	SET_BITS_OFFSET_LE(__pdesc + 20, 0, 32, __val)
+#define GET_RX_STATUS_DESC_TSFL(__pdesc)			\
+	SHIFT_AND_MASK_LE(__pdesc + 20, 0, 32)
+
+/* DWORD 6 */
+#define SET_RX_STATUS__DESC_BUFF_ADDR(__pdesc, __val)	\
+	SET_BITS_OFFSET_LE(__pdesc + 24, 0, 32, __val)
+
+#define RX_HAL_IS_CCK_RATE(_pdesc)\
+	(GET_RX_STATUS_DESC_RX_MCS(_pdesc) == DESC92S_RATE1M ||	\
+	 GET_RX_STATUS_DESC_RX_MCS(_pdesc) == DESC92S_RATE2M ||	\
+	 GET_RX_STATUS_DESC_RX_MCS(_pdesc) == DESC92S_RATE5_5M ||\
+	 GET_RX_STATUS_DESC_RX_MCS(_pdesc) == DESC92S_RATE11M)
+
+enum rf_optype {
+	RF_OP_BY_SW_3WIRE = 0,
+	RF_OP_BY_FW,
+	RF_OP_MAX
+};
+
+enum ic_inferiority {
+	IC_INFERIORITY_A = 0,
+	IC_INFERIORITY_B = 1,
+};
+
+enum fwcmd_iotype {
+	/* For DIG DM */
+	FW_CMD_DIG_ENABLE = 0,
+	FW_CMD_DIG_DISABLE = 1,
+	FW_CMD_DIG_HALT = 2,
+	FW_CMD_DIG_RESUME = 3,
+	/* For High Power DM */
+	FW_CMD_HIGH_PWR_ENABLE = 4,
+	FW_CMD_HIGH_PWR_DISABLE = 5,
+	/* For Rate adaptive DM */
+	FW_CMD_RA_RESET = 6,
+	FW_CMD_RA_ACTIVE = 7,
+	FW_CMD_RA_REFRESH_N = 8,
+	FW_CMD_RA_REFRESH_BG = 9,
+	FW_CMD_RA_INIT = 10,
+	/* For FW supported IQK */
+	FW_CMD_IQK_INIT = 11,
+	/* Tx power tracking switch,
+	 * MP driver only */
+	FW_CMD_TXPWR_TRACK_ENABLE = 12,
+	/* Tx power tracking switch,
+	 * MP driver only */
+	FW_CMD_TXPWR_TRACK_DISABLE = 13,
+	/* Tx power tracking with thermal
+	 * indication, for Normal driver */
+	FW_CMD_TXPWR_TRACK_THERMAL = 14,
+	FW_CMD_PAUSE_DM_BY_SCAN = 15,
+	FW_CMD_RESUME_DM_BY_SCAN = 16,
+	FW_CMD_RA_REFRESH_N_COMB = 17,
+	FW_CMD_RA_REFRESH_BG_COMB = 18,
+	FW_CMD_ANTENNA_SW_ENABLE = 19,
+	FW_CMD_ANTENNA_SW_DISABLE = 20,
+	/* Tx Status report for CCX from FW */
+	FW_CMD_TX_FEEDBACK_CCX_ENABLE = 21,
+	/* Indifate firmware that driver
+	 * enters LPS, For PS-Poll issue */
+	FW_CMD_LPS_ENTER = 22,
+	/* Indicate firmware that driver
+	 * leave LPS*/
+	FW_CMD_LPS_LEAVE = 23,
+	/* Set DIG mode to signal strength */
+	FW_CMD_DIG_MODE_SS = 24,
+	/* Set DIG mode to false alarm. */
+	FW_CMD_DIG_MODE_FA = 25,
+	FW_CMD_ADD_A2_ENTRY = 26,
+	FW_CMD_CTRL_DM_BY_DRIVER = 27,
+	FW_CMD_CTRL_DM_BY_DRIVER_NEW = 28,
+	FW_CMD_PAPE_CONTROL = 29,
+	FW_CMD_IQK_ENABLE = 30,
+};
+
+/*
+ * Driver info contain PHY status
+ * and other variabel size info
+ * PHY Status content as below
+ */
+struct  rx_fwinfo {
+	/* DWORD 0 */
+	u8 gain_trsw[4];
+	/* DWORD 1 */
+	u8 pwdb_all;
+	u8 cfosho[4];
+	/* DWORD 2 */
+	u8 cfotail[4];
+	/* DWORD 3 */
+	s8 rxevm[2];
+	s8 rxsnr[4];
+	/* DWORD 4 */
+	u8 pdsnr[2];
+	/* DWORD 5 */
+	u8 csi_current[2];
+	u8 csi_target[2];
+	/* DWORD 6 */
+	u8 sigevm;
+	u8 max_ex_pwr;
+	u8 ex_intf_flag:1;
+	u8 sgi_en:1;
+	u8 rxsc:2;
+	u8 reserve:4;
+};
+
+struct phy_sts_cck_8192s_t {
+	u8 adc_pwdb_x[4];
+	u8 sq_rpt;
+	u8 cck_agc_rpt;
+};
+
+#endif
+
-- 
cgit v1.2.3


From 9fe255ee3c0dd81c134b354e4b328c51f863ac40 Mon Sep 17 00:00:00 2001
From: Chaoming Li <chaoming_li@realsil.com.cn>
Date: Tue, 3 May 2011 09:47:55 -0500
Subject: rtlwifi: rtl8192se: Merge dynamic management routines

Merge routines dm.c and dm.h for RTL8192SE.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8192se/dm.c | 733 ++++++++++++++++++++++++++++
 drivers/net/wireless/rtlwifi/rtl8192se/dm.h | 164 +++++++
 2 files changed, 897 insertions(+)
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8192se/dm.c
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8192se/dm.h

diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/dm.c b/drivers/net/wireless/rtlwifi/rtl8192se/dm.c
new file mode 100644
index 00000000000..da86db86fa4
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/dm.c
@@ -0,0 +1,733 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../base.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "dm.h"
+#include "fw.h"
+
+struct dig_t digtable;
+static const u32 edca_setting_dl[PEER_MAX] = {
+	0xa44f,		/* 0 UNKNOWN */
+	0x5ea44f,	/* 1 REALTEK_90 */
+	0x5ea44f,	/* 2 REALTEK_92SE */
+	0xa630,		/* 3 BROAD	*/
+	0xa44f,		/* 4 RAL */
+	0xa630,		/* 5 ATH */
+	0xa630,		/* 6 CISCO */
+	0xa42b,		/* 7 MARV */
+};
+
+static const u32 edca_setting_dl_gmode[PEER_MAX] = {
+	0x4322,		/* 0 UNKNOWN */
+	0xa44f,		/* 1 REALTEK_90 */
+	0x5ea44f,	/* 2 REALTEK_92SE */
+	0xa42b,		/* 3 BROAD */
+	0x5e4322,	/* 4 RAL */
+	0x4322,		/* 5 ATH */
+	0xa430,		/* 6 CISCO */
+	0x5ea44f,	/* 7 MARV */
+};
+
+static const u32 edca_setting_ul[PEER_MAX] = {
+	0x5e4322,	/* 0 UNKNOWN */
+	0xa44f,		/* 1 REALTEK_90 */
+	0x5ea44f,	/* 2 REALTEK_92SE */
+	0x5ea322,	/* 3 BROAD */
+	0x5ea422,	/* 4 RAL */
+	0x5ea322,	/* 5 ATH */
+	0x3ea44f,	/* 6 CISCO */
+	0x5ea44f,	/* 7 MARV */
+};
+
+static void _rtl92s_dm_check_edca_turbo(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+
+	static u64 last_txok_cnt;
+	static u64 last_rxok_cnt;
+	u64 cur_txok_cnt = 0;
+	u64 cur_rxok_cnt = 0;
+
+	u32 edca_be_ul = edca_setting_ul[mac->vendor];
+	u32 edca_be_dl = edca_setting_dl[mac->vendor];
+	u32 edca_gmode = edca_setting_dl_gmode[mac->vendor];
+
+	if (mac->link_state != MAC80211_LINKED) {
+		rtlpriv->dm.current_turbo_edca = false;
+		goto dm_checkedcaturbo_exit;
+	}
+
+	if ((!rtlpriv->dm.is_any_nonbepkts) &&
+	    (!rtlpriv->dm.disable_framebursting)) {
+		cur_txok_cnt = rtlpriv->stats.txbytesunicast - last_txok_cnt;
+		cur_rxok_cnt = rtlpriv->stats.rxbytesunicast - last_rxok_cnt;
+
+		if (rtlpriv->phy.rf_type == RF_1T2R) {
+			if (cur_txok_cnt > 4 * cur_rxok_cnt) {
+				/* Uplink TP is present. */
+				if (rtlpriv->dm.is_cur_rdlstate ||
+					!rtlpriv->dm.current_turbo_edca) {
+					rtl_write_dword(rtlpriv, EDCAPARA_BE,
+							edca_be_ul);
+					rtlpriv->dm.is_cur_rdlstate = false;
+				}
+			} else {/* Balance TP is present. */
+				if (!rtlpriv->dm.is_cur_rdlstate ||
+					!rtlpriv->dm.current_turbo_edca) {
+					if (mac->mode == WIRELESS_MODE_G ||
+					    mac->mode == WIRELESS_MODE_B)
+						rtl_write_dword(rtlpriv,
+								EDCAPARA_BE,
+								edca_gmode);
+					else
+						rtl_write_dword(rtlpriv,
+								EDCAPARA_BE,
+								edca_be_dl);
+					rtlpriv->dm.is_cur_rdlstate = true;
+				}
+			}
+			rtlpriv->dm.current_turbo_edca = true;
+		} else {
+			if (cur_rxok_cnt > 4 * cur_txok_cnt) {
+				if (!rtlpriv->dm.is_cur_rdlstate ||
+					!rtlpriv->dm.current_turbo_edca) {
+					if (mac->mode == WIRELESS_MODE_G ||
+					    mac->mode == WIRELESS_MODE_B)
+						rtl_write_dword(rtlpriv,
+								EDCAPARA_BE,
+								edca_gmode);
+					else
+						rtl_write_dword(rtlpriv,
+								EDCAPARA_BE,
+								edca_be_dl);
+					rtlpriv->dm.is_cur_rdlstate = true;
+				}
+			} else {
+				if (rtlpriv->dm.is_cur_rdlstate ||
+					!rtlpriv->dm.current_turbo_edca) {
+					rtl_write_dword(rtlpriv, EDCAPARA_BE,
+							edca_be_ul);
+					rtlpriv->dm.is_cur_rdlstate = false;
+				}
+			}
+			rtlpriv->dm.current_turbo_edca = true;
+		}
+	} else {
+		if (rtlpriv->dm.current_turbo_edca) {
+			u8 tmp = AC0_BE;
+			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AC_PARAM,
+						      (u8 *)(&tmp));
+			rtlpriv->dm.current_turbo_edca = false;
+		}
+	}
+
+dm_checkedcaturbo_exit:
+	rtlpriv->dm.is_any_nonbepkts = false;
+	last_txok_cnt = rtlpriv->stats.txbytesunicast;
+	last_rxok_cnt = rtlpriv->stats.rxbytesunicast;
+}
+
+static void _rtl92s_dm_txpowertracking_callback_thermalmeter(
+					struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 thermalvalue = 0;
+
+	rtlpriv->dm.txpower_trackinginit = true;
+
+	thermalvalue = (u8)rtl_get_rfreg(hw, RF90_PATH_A, RF_T_METER, 0x1f);
+
+	RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
+		 ("Readback Thermal Meter = 0x%x pre thermal meter 0x%x "
+		  "eeprom_thermalmeter 0x%x\n", thermalvalue,
+		  rtlpriv->dm.thermalvalue, rtlefuse->eeprom_thermalmeter));
+
+	if (thermalvalue) {
+		rtlpriv->dm.thermalvalue = thermalvalue;
+		rtl92s_phy_set_fw_cmd(hw, FW_CMD_TXPWR_TRACK_THERMAL);
+	}
+
+	rtlpriv->dm.txpowercount = 0;
+}
+
+static void _rtl92s_dm_check_txpowertracking_thermalmeter(
+					struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	static u8 tm_trigger;
+	u8 tx_power_checkcnt = 5;
+
+	/* 2T2R TP issue */
+	if (rtlphy->rf_type == RF_2T2R)
+		return;
+
+	if (!rtlpriv->dm.txpower_tracking)
+		return;
+
+	if (rtlpriv->dm.txpowercount <= tx_power_checkcnt) {
+		rtlpriv->dm.txpowercount++;
+		return;
+	}
+
+	if (!tm_trigger) {
+		rtl_set_rfreg(hw, RF90_PATH_A, RF_T_METER,
+			      RFREG_OFFSET_MASK, 0x60);
+		tm_trigger = 1;
+	} else {
+		_rtl92s_dm_txpowertracking_callback_thermalmeter(hw);
+		tm_trigger = 0;
+	}
+}
+
+static void _rtl92s_dm_refresh_rateadaptive_mask(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rate_adaptive *ra = &(rtlpriv->ra);
+
+	u32 low_rssi_thresh = 0;
+	u32 middle_rssi_thresh = 0;
+	u32 high_rssi_thresh = 0;
+	u8 rssi_level;
+	struct ieee80211_sta *sta = NULL;
+
+	if (is_hal_stop(rtlhal))
+		return;
+
+	if (!rtlpriv->dm.useramask)
+		return;
+
+	if (!rtlpriv->dm.inform_fw_driverctrldm) {
+		rtl92s_phy_set_fw_cmd(hw, FW_CMD_CTRL_DM_BY_DRIVER);
+		rtlpriv->dm.inform_fw_driverctrldm = true;
+	}
+
+	rcu_read_lock();
+	if (mac->opmode == NL80211_IFTYPE_STATION)
+		sta = get_sta(hw, mac->vif, mac->bssid);
+	if ((mac->link_state == MAC80211_LINKED) &&
+	    (mac->opmode == NL80211_IFTYPE_STATION)) {
+		switch (ra->pre_ratr_state) {
+		case DM_RATR_STA_HIGH:
+			high_rssi_thresh = 40;
+			middle_rssi_thresh = 30;
+			low_rssi_thresh = 20;
+			break;
+		case DM_RATR_STA_MIDDLE:
+			high_rssi_thresh = 44;
+			middle_rssi_thresh = 30;
+			low_rssi_thresh = 20;
+			break;
+		case DM_RATR_STA_LOW:
+			high_rssi_thresh = 44;
+			middle_rssi_thresh = 34;
+			low_rssi_thresh = 20;
+			break;
+		case DM_RATR_STA_ULTRALOW:
+			high_rssi_thresh = 44;
+			middle_rssi_thresh = 34;
+			low_rssi_thresh = 24;
+			break;
+		default:
+			high_rssi_thresh = 44;
+			middle_rssi_thresh = 34;
+			low_rssi_thresh = 24;
+			break;
+		}
+
+		if (rtlpriv->dm.undecorated_smoothed_pwdb >
+		    (long)high_rssi_thresh) {
+			ra->ratr_state = DM_RATR_STA_HIGH;
+			rssi_level = 1;
+		} else if (rtlpriv->dm.undecorated_smoothed_pwdb >
+			   (long)middle_rssi_thresh) {
+			ra->ratr_state = DM_RATR_STA_LOW;
+			rssi_level = 3;
+		} else if (rtlpriv->dm.undecorated_smoothed_pwdb >
+			   (long)low_rssi_thresh) {
+			ra->ratr_state = DM_RATR_STA_LOW;
+			rssi_level = 5;
+		} else {
+			ra->ratr_state = DM_RATR_STA_ULTRALOW;
+			rssi_level = 6;
+		}
+
+		if (ra->pre_ratr_state != ra->ratr_state) {
+			RT_TRACE(rtlpriv, COMP_RATE, DBG_LOUD, ("RSSI = %ld "
+				"RSSI_LEVEL = %d PreState = %d, CurState = %d\n",
+				rtlpriv->dm.undecorated_smoothed_pwdb,
+				ra->ratr_state,
+				ra->pre_ratr_state, ra->ratr_state));
+
+			rtlpriv->cfg->ops->update_rate_tbl(hw, sta,
+							   ra->ratr_state);
+			ra->pre_ratr_state = ra->ratr_state;
+		}
+	}
+	rcu_read_unlock();
+}
+
+static void _rtl92s_dm_switch_baseband_mrc(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	bool current_mrc;
+	bool enable_mrc = true;
+	long tmpentry_maxpwdb = 0;
+	u8 rssi_a = 0;
+	u8 rssi_b = 0;
+
+	if (is_hal_stop(rtlhal))
+		return;
+
+	if ((rtlphy->rf_type == RF_1T1R) || (rtlphy->rf_type == RF_2T2R))
+		return;
+
+	rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_MRC, (u8 *)(&current_mrc));
+
+	if (mac->link_state >= MAC80211_LINKED) {
+		if (rtlpriv->dm.undecorated_smoothed_pwdb > tmpentry_maxpwdb) {
+			rssi_a = rtlpriv->stats.rx_rssi_percentage[RF90_PATH_A];
+			rssi_b = rtlpriv->stats.rx_rssi_percentage[RF90_PATH_B];
+		}
+	}
+
+	/* MRC settings would NOT affect TP on Wireless B mode. */
+	if (mac->mode != WIRELESS_MODE_B) {
+		if ((rssi_a == 0) && (rssi_b == 0)) {
+			enable_mrc = true;
+		} else if (rssi_b > 30) {
+			/* Turn on B-Path */
+			enable_mrc = true;
+		} else if (rssi_b < 5) {
+			/* Turn off B-path  */
+			enable_mrc = false;
+		/* Take care of RSSI differentiation. */
+		} else if (rssi_a > 15 && (rssi_a >= rssi_b)) {
+			if ((rssi_a - rssi_b) > 15)
+				/* Turn off B-path  */
+				enable_mrc = false;
+			else if ((rssi_a - rssi_b) < 10)
+				/* Turn on B-Path */
+				enable_mrc = true;
+			else
+				enable_mrc = current_mrc;
+		} else {
+			/* Turn on B-Path */
+			enable_mrc = true;
+		}
+	}
+
+	/* Update MRC settings if needed. */
+	if (enable_mrc != current_mrc)
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_MRC,
+					      (u8 *)&enable_mrc);
+
+}
+
+void rtl92s_dm_init_edca_turbo(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	rtlpriv->dm.current_turbo_edca = false;
+	rtlpriv->dm.is_any_nonbepkts = false;
+	rtlpriv->dm.is_cur_rdlstate = false;
+}
+
+static void _rtl92s_dm_init_rate_adaptive_mask(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rate_adaptive *ra = &(rtlpriv->ra);
+
+	ra->ratr_state = DM_RATR_STA_MAX;
+	ra->pre_ratr_state = DM_RATR_STA_MAX;
+
+	if (rtlpriv->dm.dm_type == DM_TYPE_BYDRIVER)
+		rtlpriv->dm.useramask = true;
+	else
+		rtlpriv->dm.useramask = false;
+
+	rtlpriv->dm.useramask = false;
+	rtlpriv->dm.inform_fw_driverctrldm = false;
+}
+
+static void _rtl92s_dm_init_txpowertracking_thermalmeter(
+				struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	rtlpriv->dm.txpower_tracking = true;
+	rtlpriv->dm.txpowercount = 0;
+	rtlpriv->dm.txpower_trackinginit = false;
+}
+
+static void _rtl92s_dm_false_alarm_counter_statistics(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct false_alarm_statistics *falsealm_cnt = &(rtlpriv->falsealm_cnt);
+	u32 ret_value;
+
+	ret_value = rtl_get_bbreg(hw, ROFDM_PHYCOUNTER1, MASKDWORD);
+	falsealm_cnt->cnt_parity_fail = ((ret_value & 0xffff0000) >> 16);
+
+	ret_value = rtl_get_bbreg(hw, ROFDM_PHYCOUNTER2, MASKDWORD);
+	falsealm_cnt->cnt_rate_illegal = (ret_value & 0xffff);
+	falsealm_cnt->cnt_crc8_fail = ((ret_value & 0xffff0000) >> 16);
+	ret_value = rtl_get_bbreg(hw, ROFDM_PHYCOUNTER3, MASKDWORD);
+	falsealm_cnt->cnt_mcs_fail = (ret_value & 0xffff);
+
+	falsealm_cnt->cnt_ofdm_fail = falsealm_cnt->cnt_parity_fail +
+		falsealm_cnt->cnt_rate_illegal + falsealm_cnt->cnt_crc8_fail +
+		falsealm_cnt->cnt_mcs_fail;
+
+	/* read CCK false alarm */
+	ret_value = rtl_get_bbreg(hw, 0xc64, MASKDWORD);
+	falsealm_cnt->cnt_cck_fail = (ret_value & 0xffff);
+	falsealm_cnt->cnt_all =	falsealm_cnt->cnt_ofdm_fail +
+		falsealm_cnt->cnt_cck_fail;
+}
+
+static void rtl92s_backoff_enable_flag(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct false_alarm_statistics *falsealm_cnt = &(rtlpriv->falsealm_cnt);
+
+	if (falsealm_cnt->cnt_all > digtable.fa_highthresh) {
+		if ((digtable.backoff_val - 6) <
+			digtable.backoffval_range_min)
+			digtable.backoff_val = digtable.backoffval_range_min;
+		else
+			digtable.backoff_val -= 6;
+	} else if (falsealm_cnt->cnt_all < digtable.fa_lowthresh) {
+		if ((digtable.backoff_val + 6) >
+			digtable.backoffval_range_max)
+			digtable.backoff_val =
+				 digtable.backoffval_range_max;
+		else
+			digtable.backoff_val += 6;
+	}
+}
+
+static void _rtl92s_dm_initial_gain_sta_beforeconnect(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct false_alarm_statistics *falsealm_cnt = &(rtlpriv->falsealm_cnt);
+	static u8 initialized, force_write;
+	u8 initial_gain = 0;
+
+	if ((digtable.pre_sta_connectstate == digtable.cur_sta_connectstate) ||
+		(digtable.cur_sta_connectstate == DIG_STA_BEFORE_CONNECT)) {
+		if (digtable.cur_sta_connectstate == DIG_STA_BEFORE_CONNECT) {
+			if (rtlpriv->psc.rfpwr_state != ERFON)
+				return;
+
+			if (digtable.backoff_enable_flag == true)
+				rtl92s_backoff_enable_flag(hw);
+			else
+				digtable.backoff_val = DM_DIG_BACKOFF;
+
+			if ((digtable.rssi_val + 10 - digtable.backoff_val) >
+				digtable.rx_gain_range_max)
+				digtable.cur_igvalue =
+						digtable.rx_gain_range_max;
+			else if ((digtable.rssi_val + 10 - digtable.backoff_val)
+				 < digtable.rx_gain_range_min)
+				digtable.cur_igvalue =
+						digtable.rx_gain_range_min;
+			else
+				digtable.cur_igvalue = digtable.rssi_val + 10 -
+						digtable.backoff_val;
+
+			if (falsealm_cnt->cnt_all > 10000)
+				digtable.cur_igvalue =
+					 (digtable.cur_igvalue > 0x33) ?
+					 digtable.cur_igvalue : 0x33;
+
+			if (falsealm_cnt->cnt_all > 16000)
+				digtable.cur_igvalue =
+						 digtable.rx_gain_range_max;
+		/* connected -> connected or disconnected -> disconnected  */
+		} else {
+			/* Firmware control DIG, do nothing in driver dm */
+			return;
+		}
+		/* disconnected -> connected or connected ->
+		 * disconnected or beforeconnect->(dis)connected */
+	} else {
+		/* Enable FW DIG */
+		digtable.dig_ext_port_stage = DIG_EXT_PORT_STAGE_MAX;
+		rtl92s_phy_set_fw_cmd(hw, FW_CMD_DIG_ENABLE);
+
+		digtable.backoff_val = DM_DIG_BACKOFF;
+		digtable.cur_igvalue = rtlpriv->phy.default_initialgain[0];
+		digtable.pre_igvalue = 0;
+		return;
+	}
+
+	/* Forced writing to prevent from fw-dig overwriting. */
+	if (digtable.pre_igvalue != rtl_get_bbreg(hw, ROFDM0_XAAGCCORE1,
+						  MASKBYTE0))
+		force_write = 1;
+
+	if ((digtable.pre_igvalue != digtable.cur_igvalue) ||
+	    !initialized || force_write) {
+		/* Disable FW DIG */
+		rtl92s_phy_set_fw_cmd(hw, FW_CMD_DIG_DISABLE);
+
+		initial_gain = (u8)digtable.cur_igvalue;
+
+		/* Set initial gain. */
+		rtl_set_bbreg(hw, ROFDM0_XAAGCCORE1, MASKBYTE0, initial_gain);
+		rtl_set_bbreg(hw, ROFDM0_XBAGCCORE1, MASKBYTE0, initial_gain);
+		digtable.pre_igvalue = digtable.cur_igvalue;
+		initialized = 1;
+		force_write = 0;
+	}
+}
+
+static void _rtl92s_dm_ctrl_initgain_bytwoport(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	if (rtlpriv->mac80211.act_scanning)
+		return;
+
+	/* Decide the current status and if modify initial gain or not */
+	if (rtlpriv->mac80211.link_state >= MAC80211_LINKED ||
+	    rtlpriv->mac80211.opmode == NL80211_IFTYPE_ADHOC)
+		digtable.cur_sta_connectstate = DIG_STA_CONNECT;
+	else
+		digtable.cur_sta_connectstate = DIG_STA_DISCONNECT;
+
+	digtable.rssi_val = rtlpriv->dm.undecorated_smoothed_pwdb;
+
+	/* Change dig mode to rssi */
+	if (digtable.cur_sta_connectstate != DIG_STA_DISCONNECT) {
+		if (digtable.dig_twoport_algorithm ==
+		    DIG_TWO_PORT_ALGO_FALSE_ALARM) {
+			digtable.dig_twoport_algorithm = DIG_TWO_PORT_ALGO_RSSI;
+			rtl92s_phy_set_fw_cmd(hw, FW_CMD_DIG_MODE_SS);
+		}
+	}
+
+	_rtl92s_dm_false_alarm_counter_statistics(hw);
+	_rtl92s_dm_initial_gain_sta_beforeconnect(hw);
+
+	digtable.pre_sta_connectstate = digtable.cur_sta_connectstate;
+}
+
+static void _rtl92s_dm_ctrl_initgain_byrssi(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	/* 2T2R TP issue */
+	if (rtlphy->rf_type == RF_2T2R)
+		return;
+
+	if (!rtlpriv->dm.dm_initialgain_enable)
+		return;
+
+	if (digtable.dig_enable_flag == false)
+		return;
+
+	_rtl92s_dm_ctrl_initgain_bytwoport(hw);
+}
+
+static void _rtl92s_dm_dynamic_txpower(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	long undecorated_smoothed_pwdb;
+	long txpwr_threshold_lv1, txpwr_threshold_lv2;
+
+	/* 2T2R TP issue */
+	if (rtlphy->rf_type == RF_2T2R)
+		return;
+
+	if (!rtlpriv->dm.dynamic_txpower_enable ||
+	    rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) {
+		rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL;
+		return;
+	}
+
+	if ((mac->link_state < MAC80211_LINKED) &&
+	    (rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb == 0)) {
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_TRACE,
+			 ("Not connected to any\n"));
+
+		rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL;
+
+		rtlpriv->dm.last_dtp_lvl = TX_HIGHPWR_LEVEL_NORMAL;
+		return;
+	}
+
+	if (mac->link_state >= MAC80211_LINKED) {
+		if (mac->opmode == NL80211_IFTYPE_ADHOC) {
+			undecorated_smoothed_pwdb =
+			    rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb;
+			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+				 ("AP Client PWDB = 0x%lx\n",
+				  undecorated_smoothed_pwdb));
+		} else {
+			undecorated_smoothed_pwdb =
+			    rtlpriv->dm.undecorated_smoothed_pwdb;
+			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+				 ("STA Default Port PWDB = 0x%lx\n",
+				  undecorated_smoothed_pwdb));
+		}
+	} else {
+		undecorated_smoothed_pwdb =
+		    rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb;
+
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+			 ("AP Ext Port PWDB = 0x%lx\n",
+			  undecorated_smoothed_pwdb));
+	}
+
+	txpwr_threshold_lv2 = TX_POWER_NEAR_FIELD_THRESH_LVL2;
+	txpwr_threshold_lv1 = TX_POWER_NEAR_FIELD_THRESH_LVL1;
+
+	if (rtl_get_bbreg(hw, 0xc90, MASKBYTE0) == 1)
+		rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL;
+	else if (undecorated_smoothed_pwdb >= txpwr_threshold_lv2)
+		rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL2;
+	else if ((undecorated_smoothed_pwdb < (txpwr_threshold_lv2 - 3)) &&
+		(undecorated_smoothed_pwdb >= txpwr_threshold_lv1))
+		rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL1;
+	else if (undecorated_smoothed_pwdb < (txpwr_threshold_lv1 - 3))
+		rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL;
+
+	if ((rtlpriv->dm.dynamic_txhighpower_lvl != rtlpriv->dm.last_dtp_lvl))
+		rtl92s_phy_set_txpower(hw, rtlphy->current_channel);
+
+	rtlpriv->dm.last_dtp_lvl = rtlpriv->dm.dynamic_txhighpower_lvl;
+}
+
+static void _rtl92s_dm_init_dig(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	/* Disable DIG scheme now.*/
+	digtable.dig_enable_flag = true;
+	digtable.backoff_enable_flag = true;
+
+	if ((rtlpriv->dm.dm_type == DM_TYPE_BYDRIVER) &&
+	    (hal_get_firmwareversion(rtlpriv) >= 0x3c))
+		digtable.dig_algorithm = DIG_ALGO_BY_TOW_PORT;
+	else
+		digtable.dig_algorithm =
+			 DIG_ALGO_BEFORE_CONNECT_BY_RSSI_AND_ALARM;
+
+	digtable.dig_twoport_algorithm = DIG_TWO_PORT_ALGO_RSSI;
+	digtable.dig_ext_port_stage = DIG_EXT_PORT_STAGE_MAX;
+	/* off=by real rssi value, on=by digtable.rssi_val for new dig */
+	digtable.dig_dbgmode = DM_DBG_OFF;
+	digtable.dig_slgorithm_switch = 0;
+
+	/* 2007/10/04 MH Define init gain threshol. */
+	digtable.dig_state = DM_STA_DIG_MAX;
+	digtable.dig_highpwrstate = DM_STA_DIG_MAX;
+
+	digtable.cur_sta_connectstate = DIG_STA_DISCONNECT;
+	digtable.pre_sta_connectstate = DIG_STA_DISCONNECT;
+	digtable.cur_ap_connectstate = DIG_AP_DISCONNECT;
+	digtable.pre_ap_connectstate = DIG_AP_DISCONNECT;
+
+	digtable.rssi_lowthresh = DM_DIG_THRESH_LOW;
+	digtable.rssi_highthresh = DM_DIG_THRESH_HIGH;
+
+	digtable.fa_lowthresh = DM_FALSEALARM_THRESH_LOW;
+	digtable.fa_highthresh = DM_FALSEALARM_THRESH_HIGH;
+
+	digtable.rssi_highpower_lowthresh = DM_DIG_HIGH_PWR_THRESH_LOW;
+	digtable.rssi_highpower_highthresh = DM_DIG_HIGH_PWR_THRESH_HIGH;
+
+	/* for dig debug rssi value */
+	digtable.rssi_val = 50;
+	digtable.backoff_val = DM_DIG_BACKOFF;
+	digtable.rx_gain_range_max = DM_DIG_MAX;
+
+	digtable.rx_gain_range_min = DM_DIG_MIN;
+
+	digtable.backoffval_range_max = DM_DIG_BACKOFF_MAX;
+	digtable.backoffval_range_min = DM_DIG_BACKOFF_MIN;
+}
+
+static void _rtl92s_dm_init_dynamic_txpower(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	if ((hal_get_firmwareversion(rtlpriv) >= 60) &&
+	    (rtlpriv->dm.dm_type == DM_TYPE_BYDRIVER))
+		rtlpriv->dm.dynamic_txpower_enable = true;
+	else
+		rtlpriv->dm.dynamic_txpower_enable = false;
+
+	rtlpriv->dm.last_dtp_lvl = TX_HIGHPWR_LEVEL_NORMAL;
+	rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL;
+}
+
+void rtl92s_dm_init(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	rtlpriv->dm.dm_type = DM_TYPE_BYDRIVER;
+	rtlpriv->dm.undecorated_smoothed_pwdb = -1;
+
+	_rtl92s_dm_init_dynamic_txpower(hw);
+	rtl92s_dm_init_edca_turbo(hw);
+	_rtl92s_dm_init_rate_adaptive_mask(hw);
+	_rtl92s_dm_init_txpowertracking_thermalmeter(hw);
+	_rtl92s_dm_init_dig(hw);
+
+	rtl_write_dword(rtlpriv, WFM5, FW_CCA_CHK_ENABLE);
+}
+
+void rtl92s_dm_watchdog(struct ieee80211_hw *hw)
+{
+	_rtl92s_dm_check_edca_turbo(hw);
+	_rtl92s_dm_check_txpowertracking_thermalmeter(hw);
+	_rtl92s_dm_ctrl_initgain_byrssi(hw);
+	_rtl92s_dm_dynamic_txpower(hw);
+	_rtl92s_dm_refresh_rateadaptive_mask(hw);
+	_rtl92s_dm_switch_baseband_mrc(hw);
+}
+
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/dm.h b/drivers/net/wireless/rtlwifi/rtl8192se/dm.h
new file mode 100644
index 00000000000..9051a556acc
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/dm.h
@@ -0,0 +1,164 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+#ifndef	__RTL_92S_DM_H__
+#define __RTL_92S_DM_H__
+
+struct dig_t {
+	u8 dig_enable_flag;
+	u8 dig_algorithm;
+	u8 dig_twoport_algorithm;
+	u8 dig_ext_port_stage;
+	u8 dig_dbgmode;
+	u8 dig_slgorithm_switch;
+
+	long rssi_lowthresh;
+	long rssi_highthresh;
+
+	u32 fa_lowthresh;
+	u32 fa_highthresh;
+
+	long rssi_highpower_lowthresh;
+	long rssi_highpower_highthresh;
+
+	u8 dig_state;
+	u8 dig_highpwrstate;
+	u8 cur_sta_connectstate;
+	u8 pre_sta_connectstate;
+	u8 cur_ap_connectstate;
+	u8 pre_ap_connectstate;
+
+	u8 cur_pd_thstate;
+	u8 pre_pd_thstate;
+	u8 cur_cs_ratiostate;
+	u8 pre_cs_ratiostate;
+
+	u32 pre_igvalue;
+	u32	cur_igvalue;
+
+	u8 backoff_enable_flag;
+	char backoff_val;
+	char backoffval_range_max;
+	char backoffval_range_min;
+	u8 rx_gain_range_max;
+	u8 rx_gain_range_min;
+
+	long rssi_val;
+};
+
+enum dm_dig_alg {
+	DIG_ALGO_BY_FALSE_ALARM = 0,
+	DIG_ALGO_BY_RSSI	= 1,
+	DIG_ALGO_BEFORE_CONNECT_BY_RSSI_AND_ALARM = 2,
+	DIG_ALGO_BY_TOW_PORT = 3,
+	DIG_ALGO_MAX
+};
+
+enum dm_dig_two_port_alg {
+	DIG_TWO_PORT_ALGO_RSSI = 0,
+	DIG_TWO_PORT_ALGO_FALSE_ALARM = 1,
+};
+
+enum dm_dig_dbg {
+	DM_DBG_OFF = 0,
+	DM_DBG_ON = 1,
+	DM_DBG_MAX
+};
+
+enum dm_dig_sta {
+	DM_STA_DIG_OFF = 0,
+	DM_STA_DIG_ON,
+	DM_STA_DIG_MAX
+};
+
+enum dm_dig_connect {
+	DIG_STA_DISCONNECT = 0,
+	DIG_STA_CONNECT = 1,
+	DIG_STA_BEFORE_CONNECT = 2,
+	DIG_AP_DISCONNECT = 3,
+	DIG_AP_CONNECT = 4,
+	DIG_AP_ADD_STATION = 5,
+	DIG_CONNECT_MAX
+};
+
+enum dm_dig_ext_port_alg {
+	DIG_EXT_PORT_STAGE_0 = 0,
+	DIG_EXT_PORT_STAGE_1 = 1,
+	DIG_EXT_PORT_STAGE_2 = 2,
+	DIG_EXT_PORT_STAGE_3 = 3,
+	DIG_EXT_PORT_STAGE_MAX = 4,
+};
+
+enum dm_ratr_sta {
+	DM_RATR_STA_HIGH = 0,
+	DM_RATR_STA_MIDDLEHIGH = 1,
+	DM_RATR_STA_MIDDLE = 2,
+	DM_RATR_STA_MIDDLELOW = 3,
+	DM_RATR_STA_LOW = 4,
+	DM_RATR_STA_ULTRALOW = 5,
+	DM_RATR_STA_MAX
+};
+
+#define DM_TYPE_BYFW			0
+#define DM_TYPE_BYDRIVER		1
+
+#define	TX_HIGH_PWR_LEVEL_NORMAL	0
+#define	TX_HIGH_PWR_LEVEL_LEVEL1	1
+#define	TX_HIGH_PWR_LEVEL_LEVEL2	2
+
+#define	HAL_DM_DIG_DISABLE		BIT(0)	/* Disable Dig */
+#define	HAL_DM_HIPWR_DISABLE		BIT(1)	/* Disable High Power */
+
+#define	TX_HIGHPWR_LEVEL_NORMAL		0
+#define	TX_HIGHPWR_LEVEL_NORMAL1	1
+#define	TX_HIGHPWR_LEVEL_NORMAL2	2
+
+#define	TX_POWER_NEAR_FIELD_THRESH_LVL2	74
+#define	TX_POWER_NEAR_FIELD_THRESH_LVL1	67
+
+#define DM_DIG_THRESH_HIGH		40
+#define DM_DIG_THRESH_LOW		35
+#define	DM_FALSEALARM_THRESH_LOW	40
+#define	DM_FALSEALARM_THRESH_HIGH	1000
+#define	DM_DIG_HIGH_PWR_THRESH_HIGH	75
+#define	DM_DIG_HIGH_PWR_THRESH_LOW	70
+#define	DM_DIG_BACKOFF			12
+#define	DM_DIG_MAX			0x3e
+#define	DM_DIG_MIN			0x1c
+#define	DM_DIG_MIN_Netcore		0x12
+#define	DM_DIG_BACKOFF_MAX		12
+#define	DM_DIG_BACKOFF_MIN		-4
+
+extern struct dig_t digtable;
+
+void rtl92s_dm_watchdog(struct ieee80211_hw *hw);
+void rtl92s_dm_init(struct ieee80211_hw *hw);
+void rtl92s_dm_init_edca_turbo(struct ieee80211_hw *hw);
+
+#endif
+
-- 
cgit v1.2.3


From 701307a885b13a1790b94e232923de1d199e3cc9 Mon Sep 17 00:00:00 2001
From: Chaoming Li <chaoming_li@realsil.com.cn>
Date: Tue, 3 May 2011 09:48:05 -0500
Subject: rtlwifi: rtl8192se: Merge firmware routines

Merge routines fw.c and fw.h for RTL8192SE. In addition, make changes
to rtlwifi/wifi.h to support RTL8192SE.

Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8192se/fw.c | 654 ++++++++++++++++++++++++++++
 drivers/net/wireless/rtlwifi/rtl8192se/fw.h | 375 ++++++++++++++++
 2 files changed, 1029 insertions(+)
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8192se/fw.c
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8192se/fw.h

diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/fw.c b/drivers/net/wireless/rtlwifi/rtl8192se/fw.c
new file mode 100644
index 00000000000..3b5af0113d7
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/fw.c
@@ -0,0 +1,654 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../pci.h"
+#include "../base.h"
+#include "reg.h"
+#include "def.h"
+#include "fw.h"
+
+static void _rtl92s_fw_set_rqpn(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	rtl_write_dword(rtlpriv, RQPN, 0xffffffff);
+	rtl_write_dword(rtlpriv, RQPN + 4, 0xffffffff);
+	rtl_write_byte(rtlpriv, RQPN + 8, 0xff);
+	rtl_write_byte(rtlpriv, RQPN + 0xB, 0x80);
+}
+
+static bool _rtl92s_firmware_enable_cpu(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 ichecktime = 200;
+	u16 tmpu2b;
+	u8 tmpu1b, cpustatus = 0;
+
+	_rtl92s_fw_set_rqpn(hw);
+
+	/* Enable CPU. */
+	tmpu1b = rtl_read_byte(rtlpriv, SYS_CLKR);
+	/* AFE source */
+	rtl_write_byte(rtlpriv, SYS_CLKR, (tmpu1b | SYS_CPU_CLKSEL));
+
+	tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
+	rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | FEN_CPUEN));
+
+	/* Polling IMEM Ready after CPU has refilled. */
+	do {
+		cpustatus = rtl_read_byte(rtlpriv, TCR);
+		if (cpustatus & IMEM_RDY) {
+			RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+				("IMEM Ready after CPU has refilled.\n"));
+			break;
+		}
+
+		udelay(100);
+	} while (ichecktime--);
+
+	if (!(cpustatus & IMEM_RDY))
+		return false;
+
+	return true;
+}
+
+static enum fw_status _rtl92s_firmware_get_nextstatus(
+		enum fw_status fw_currentstatus)
+{
+	enum fw_status	next_fwstatus = 0;
+
+	switch (fw_currentstatus) {
+	case FW_STATUS_INIT:
+		next_fwstatus = FW_STATUS_LOAD_IMEM;
+		break;
+	case FW_STATUS_LOAD_IMEM:
+		next_fwstatus = FW_STATUS_LOAD_EMEM;
+		break;
+	case FW_STATUS_LOAD_EMEM:
+		next_fwstatus = FW_STATUS_LOAD_DMEM;
+		break;
+	case FW_STATUS_LOAD_DMEM:
+		next_fwstatus = FW_STATUS_READY;
+		break;
+	default:
+		break;
+	}
+
+	return next_fwstatus;
+}
+
+static u8 _rtl92s_firmware_header_map_rftype(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	switch (rtlphy->rf_type) {
+	case RF_1T1R:
+		return 0x11;
+		break;
+	case RF_1T2R:
+		return 0x12;
+		break;
+	case RF_2T2R:
+		return 0x22;
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+			 ("Unknown RF type(%x)\n",
+			 rtlphy->rf_type));
+		break;
+	}
+	return 0x22;
+}
+
+static void _rtl92s_firmwareheader_priveupdate(struct ieee80211_hw *hw,
+		struct fw_priv *pfw_priv)
+{
+	/* Update RF types for RATR settings. */
+	pfw_priv->rf_config = _rtl92s_firmware_header_map_rftype(hw);
+}
+
+
+
+static bool _rtl92s_cmd_send_packet(struct ieee80211_hw *hw,
+		struct sk_buff *skb, u8 last)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl8192_tx_ring *ring;
+	struct rtl_tx_desc *pdesc;
+	unsigned long flags;
+	u8 idx = 0;
+
+	ring = &rtlpci->tx_ring[TXCMD_QUEUE];
+
+	spin_lock_irqsave(&rtlpriv->locks.irq_th_lock, flags);
+
+	idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries;
+	pdesc = &ring->desc[idx];
+	rtlpriv->cfg->ops->fill_tx_cmddesc(hw, (u8 *)pdesc, 1, 1, skb);
+	__skb_queue_tail(&ring->queue, skb);
+
+	spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags);
+
+	return true;
+}
+
+static bool _rtl92s_firmware_downloadcode(struct ieee80211_hw *hw,
+		u8 *code_virtual_address, u32 buffer_len)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct sk_buff *skb;
+	struct rtl_tcb_desc *tcb_desc;
+	unsigned char *seg_ptr;
+	u16 frag_threshold = MAX_FIRMWARE_CODE_SIZE;
+	u16 frag_length, frag_offset = 0;
+	u16 extra_descoffset = 0;
+	u8 last_inipkt = 0;
+
+	_rtl92s_fw_set_rqpn(hw);
+
+	if (buffer_len >= MAX_FIRMWARE_CODE_SIZE) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			("Size over FIRMWARE_CODE_SIZE!\n"));
+
+		return false;
+	}
+
+	extra_descoffset = 0;
+
+	do {
+		if ((buffer_len - frag_offset) > frag_threshold) {
+			frag_length = frag_threshold + extra_descoffset;
+		} else {
+			frag_length = (u16)(buffer_len - frag_offset +
+					    extra_descoffset);
+			last_inipkt = 1;
+		}
+
+		/* Allocate skb buffer to contain firmware */
+		/* info and tx descriptor info. */
+		skb = dev_alloc_skb(frag_length);
+		skb_reserve(skb, extra_descoffset);
+		seg_ptr = (u8 *)skb_put(skb, (u32)(frag_length -
+					extra_descoffset));
+		memcpy(seg_ptr, code_virtual_address + frag_offset,
+		       (u32)(frag_length - extra_descoffset));
+
+		tcb_desc = (struct rtl_tcb_desc *)(skb->cb);
+		tcb_desc->queue_index = TXCMD_QUEUE;
+		tcb_desc->cmd_or_init = DESC_PACKET_TYPE_INIT;
+		tcb_desc->last_inipkt = last_inipkt;
+
+		_rtl92s_cmd_send_packet(hw, skb, last_inipkt);
+
+		frag_offset += (frag_length - extra_descoffset);
+
+	} while (frag_offset < buffer_len);
+
+	rtl_write_byte(rtlpriv, TP_POLL, TPPOLL_CQ);
+
+	return true ;
+}
+
+static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
+		u8 loadfw_status)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rt_firmware *firmware = (struct rt_firmware *)rtlhal->pfirmware;
+	u32 tmpu4b;
+	u8 cpustatus = 0;
+	short pollingcnt = 1000;
+	bool rtstatus = true;
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("LoadStaus(%d)\n",
+		 loadfw_status));
+
+	firmware->fwstatus = (enum fw_status)loadfw_status;
+
+	switch (loadfw_status) {
+	case FW_STATUS_LOAD_IMEM:
+		/* Polling IMEM code done. */
+		do {
+			cpustatus = rtl_read_byte(rtlpriv, TCR);
+			if (cpustatus & IMEM_CODE_DONE)
+				break;
+			udelay(5);
+		} while (pollingcnt--);
+
+		if (!(cpustatus & IMEM_CHK_RPT) || (pollingcnt <= 0)) {
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 ("FW_STATUS_LOAD_IMEM"
+				 " FAIL CPU, Status=%x\r\n", cpustatus));
+			goto status_check_fail;
+		}
+		break;
+
+	case FW_STATUS_LOAD_EMEM:
+		/* Check Put Code OK and Turn On CPU */
+		/* Polling EMEM code done. */
+		do {
+			cpustatus = rtl_read_byte(rtlpriv, TCR);
+			if (cpustatus & EMEM_CODE_DONE)
+				break;
+			udelay(5);
+		} while (pollingcnt--);
+
+		if (!(cpustatus & EMEM_CHK_RPT) || (pollingcnt <= 0)) {
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 ("FW_STATUS_LOAD_EMEM"
+				 " FAIL CPU, Status=%x\r\n", cpustatus));
+			goto status_check_fail;
+		}
+
+		/* Turn On CPU */
+		rtstatus = _rtl92s_firmware_enable_cpu(hw);
+		if (rtstatus != true) {
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 ("Enable CPU fail!\n"));
+			goto status_check_fail;
+		}
+		break;
+
+	case FW_STATUS_LOAD_DMEM:
+		/* Polling DMEM code done */
+		do {
+			cpustatus = rtl_read_byte(rtlpriv, TCR);
+			if (cpustatus & DMEM_CODE_DONE)
+				break;
+			udelay(5);
+		} while (pollingcnt--);
+
+		if (!(cpustatus & DMEM_CODE_DONE) || (pollingcnt <= 0)) {
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 ("Polling  DMEM code done"
+				 " fail ! cpustatus(%#x)\n", cpustatus));
+			goto status_check_fail;
+		}
+
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+			 ("DMEM code download success,"
+			" cpustatus(%#x)\n", cpustatus));
+
+		/* Prevent Delay too much and being scheduled out */
+		/* Polling Load Firmware ready */
+		pollingcnt = 2000;
+		do {
+			cpustatus = rtl_read_byte(rtlpriv, TCR);
+			if (cpustatus & FWRDY)
+				break;
+			udelay(40);
+		} while (pollingcnt--);
+
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+			 ("Polling Load Firmware ready,"
+			" cpustatus(%x)\n",	cpustatus));
+
+		if (((cpustatus & LOAD_FW_READY) != LOAD_FW_READY) ||
+		    (pollingcnt <= 0)) {
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 ("Polling Load Firmware"
+				" ready fail ! cpustatus(%x)\n", cpustatus));
+			goto status_check_fail;
+		}
+
+		/* If right here, we can set TCR/RCR to desired value  */
+		/* and config MAC lookback mode to normal mode */
+		tmpu4b = rtl_read_dword(rtlpriv, TCR);
+		rtl_write_dword(rtlpriv, TCR, (tmpu4b & (~TCR_ICV)));
+
+		tmpu4b = rtl_read_dword(rtlpriv, RCR);
+		rtl_write_dword(rtlpriv, RCR, (tmpu4b | RCR_APPFCS |
+				RCR_APP_ICV | RCR_APP_MIC));
+
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+			 ("Current RCR settings(%#x)\n", tmpu4b));
+
+		/* Set to normal mode. */
+		rtl_write_byte(rtlpriv, LBKMD_SEL, LBK_NORMAL);
+		break;
+
+	default:
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+			 ("Unknown status check!\n"));
+		rtstatus = false;
+		break;
+	}
+
+status_check_fail:
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("loadfw_status(%d), "
+		 "rtstatus(%x)\n", loadfw_status, rtstatus));
+	return rtstatus;
+}
+
+int rtl92s_download_fw(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rt_firmware *firmware = NULL;
+	struct fw_hdr *pfwheader;
+	struct fw_priv *pfw_priv = NULL;
+	u8 *puc_mappedfile = NULL;
+	u32 ul_filelength = 0;
+	u32 file_length = 0;
+	u8 fwhdr_size = RT_8192S_FIRMWARE_HDR_SIZE;
+	u8 fwstatus = FW_STATUS_INIT;
+	bool rtstatus = true;
+
+	if (!rtlhal->pfirmware)
+		return 1;
+
+	firmware = (struct rt_firmware *)rtlhal->pfirmware;
+	firmware->fwstatus = FW_STATUS_INIT;
+
+	puc_mappedfile = firmware->sz_fw_tmpbuffer;
+	file_length = firmware->sz_fw_tmpbufferlen;
+
+	/* 1. Retrieve FW header. */
+	firmware->pfwheader = (struct fw_hdr *) puc_mappedfile;
+	pfwheader = firmware->pfwheader;
+	firmware->firmwareversion =  byte(pfwheader->version, 0);
+	firmware->pfwheader->fwpriv.hci_sel = 1;/* pcie */
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("signature:%x, version:"
+		 "%x, size:%x,"
+		 "imemsize:%x, sram size:%x\n", pfwheader->signature,
+		 pfwheader->version, pfwheader->dmem_size,
+		 pfwheader->img_imem_size, pfwheader->img_sram_size));
+
+	/* 2. Retrieve IMEM image. */
+	if ((pfwheader->img_imem_size == 0) || (pfwheader->img_imem_size >
+	    sizeof(firmware->fw_imem))) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			("memory for data image is less than IMEM required\n"));
+		goto fail;
+	} else {
+		puc_mappedfile += fwhdr_size;
+
+		memcpy(firmware->fw_imem, puc_mappedfile,
+		       pfwheader->img_imem_size);
+		firmware->fw_imem_len = pfwheader->img_imem_size;
+	}
+
+	/* 3. Retriecve EMEM image. */
+	if (pfwheader->img_sram_size > sizeof(firmware->fw_emem)) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			("memory for data image is less than EMEM required\n"));
+		goto fail;
+	} else {
+		puc_mappedfile += firmware->fw_imem_len;
+
+		memcpy(firmware->fw_emem, puc_mappedfile,
+		       pfwheader->img_sram_size);
+		firmware->fw_emem_len = pfwheader->img_sram_size;
+	}
+
+	/* 4. download fw now */
+	fwstatus = _rtl92s_firmware_get_nextstatus(firmware->fwstatus);
+	while (fwstatus != FW_STATUS_READY) {
+		/* Image buffer redirection. */
+		switch (fwstatus) {
+		case FW_STATUS_LOAD_IMEM:
+			puc_mappedfile = firmware->fw_imem;
+			ul_filelength = firmware->fw_imem_len;
+			break;
+		case FW_STATUS_LOAD_EMEM:
+			puc_mappedfile = firmware->fw_emem;
+			ul_filelength = firmware->fw_emem_len;
+			break;
+		case FW_STATUS_LOAD_DMEM:
+			/* Partial update the content of header private. */
+			pfwheader = firmware->pfwheader;
+			pfw_priv = &pfwheader->fwpriv;
+			_rtl92s_firmwareheader_priveupdate(hw, pfw_priv);
+			puc_mappedfile = (u8 *)(firmware->pfwheader) +
+					RT_8192S_FIRMWARE_HDR_EXCLUDE_PRI_SIZE;
+			ul_filelength = fwhdr_size -
+					RT_8192S_FIRMWARE_HDR_EXCLUDE_PRI_SIZE;
+			break;
+		default:
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+					("Unexpected Download step!!\n"));
+			goto fail;
+			break;
+		}
+
+		/* <2> Download image file */
+		rtstatus = _rtl92s_firmware_downloadcode(hw, puc_mappedfile,
+				ul_filelength);
+
+		if (rtstatus != true) {
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("fail!\n"));
+			goto fail;
+		}
+
+		/* <3> Check whether load FW process is ready */
+		rtstatus = _rtl92s_firmware_checkready(hw, fwstatus);
+		if (rtstatus != true) {
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("fail!\n"));
+			goto fail;
+		}
+
+		fwstatus = _rtl92s_firmware_get_nextstatus(firmware->fwstatus);
+	}
+
+	return rtstatus;
+fail:
+	return 0;
+}
+
+static u32 _rtl92s_fill_h2c_cmd(struct sk_buff *skb, u32 h2cbufferlen,
+				u32 cmd_num, u32 *pelement_id, u32 *pcmd_len,
+				u8 **pcmb_buffer, u8 *cmd_start_seq)
+{
+	u32 totallen = 0, len = 0, tx_desclen = 0;
+	u32 pre_continueoffset = 0;
+	u8 *ph2c_buffer;
+	u8 i = 0;
+
+	do {
+		/* 8 - Byte aligment */
+		len = H2C_TX_CMD_HDR_LEN + N_BYTE_ALIGMENT(pcmd_len[i], 8);
+
+		/* Buffer length is not enough */
+		if (h2cbufferlen < totallen + len + tx_desclen)
+			break;
+
+		/* Clear content */
+		ph2c_buffer = (u8 *)skb_put(skb, (u32)len);
+		memset((ph2c_buffer + totallen + tx_desclen), 0, len);
+
+		/* CMD len */
+		SET_BITS_TO_LE_4BYTE((ph2c_buffer + totallen + tx_desclen),
+				      0, 16, pcmd_len[i]);
+
+		/* CMD ID */
+		SET_BITS_TO_LE_4BYTE((ph2c_buffer + totallen + tx_desclen),
+				      16, 8, pelement_id[i]);
+
+		/* CMD Sequence */
+		*cmd_start_seq = *cmd_start_seq % 0x80;
+		SET_BITS_TO_LE_4BYTE((ph2c_buffer + totallen + tx_desclen),
+				      24, 7, *cmd_start_seq);
+		++*cmd_start_seq;
+
+		/* Copy memory */
+		memcpy((ph2c_buffer + totallen + tx_desclen +
+			H2C_TX_CMD_HDR_LEN), pcmb_buffer[i], pcmd_len[i]);
+
+		/* CMD continue */
+		/* set the continue in prevoius cmd. */
+		if (i < cmd_num - 1)
+			SET_BITS_TO_LE_4BYTE((ph2c_buffer + pre_continueoffset),
+					      31, 1, 1);
+
+		pre_continueoffset = totallen;
+
+		totallen += len;
+	} while (++i < cmd_num);
+
+	return totallen;
+}
+
+static u32 _rtl92s_get_h2c_cmdlen(u32 h2cbufferlen, u32 cmd_num, u32 *pcmd_len)
+{
+	u32 totallen = 0, len = 0, tx_desclen = 0;
+	u8 i = 0;
+
+	do {
+		/* 8 - Byte aligment */
+		len = H2C_TX_CMD_HDR_LEN + N_BYTE_ALIGMENT(pcmd_len[i], 8);
+
+		/* Buffer length is not enough */
+		if (h2cbufferlen < totallen + len + tx_desclen)
+			break;
+
+		totallen += len;
+	} while (++i < cmd_num);
+
+	return totallen + tx_desclen;
+}
+
+static bool _rtl92s_firmware_set_h2c_cmd(struct ieee80211_hw *hw, u8 h2c_cmd,
+					 u8 *pcmd_buffer)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_tcb_desc *cb_desc;
+	struct sk_buff *skb;
+	u32	element_id = 0;
+	u32	cmd_len = 0;
+	u32	len;
+
+	switch (h2c_cmd) {
+	case FW_H2C_SETPWRMODE:
+		element_id = H2C_SETPWRMODE_CMD ;
+		cmd_len = sizeof(struct h2c_set_pwrmode_parm);
+		break;
+	case FW_H2C_JOINBSSRPT:
+		element_id = H2C_JOINBSSRPT_CMD;
+		cmd_len = sizeof(struct h2c_joinbss_rpt_parm);
+		break;
+	case FW_H2C_WOWLAN_UPDATE_GTK:
+		element_id = H2C_WOWLAN_UPDATE_GTK_CMD;
+		cmd_len = sizeof(struct h2c_wpa_two_way_parm);
+		break;
+	case FW_H2C_WOWLAN_UPDATE_IV:
+		element_id = H2C_WOWLAN_UPDATE_IV_CMD;
+		cmd_len = sizeof(unsigned long long);
+		break;
+	case FW_H2C_WOWLAN_OFFLOAD:
+		element_id = H2C_WOWLAN_FW_OFFLOAD;
+		cmd_len = sizeof(u8);
+		break;
+	default:
+		break;
+	}
+
+	len = _rtl92s_get_h2c_cmdlen(MAX_TRANSMIT_BUFFER_SIZE, 1, &cmd_len);
+	skb = dev_alloc_skb(len);
+	cb_desc = (struct rtl_tcb_desc *)(skb->cb);
+	cb_desc->queue_index = TXCMD_QUEUE;
+	cb_desc->cmd_or_init = DESC_PACKET_TYPE_NORMAL;
+	cb_desc->last_inipkt = false;
+
+	_rtl92s_fill_h2c_cmd(skb, MAX_TRANSMIT_BUFFER_SIZE, 1, &element_id,
+			&cmd_len, &pcmd_buffer,	&rtlhal->h2c_txcmd_seq);
+	_rtl92s_cmd_send_packet(hw, skb, false);
+	rtlpriv->cfg->ops->tx_polling(hw, TXCMD_QUEUE);
+
+	return true;
+}
+
+void rtl92s_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 Mode)
+{
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct h2c_set_pwrmode_parm	pwrmode;
+	u16 max_wakeup_period = 0;
+
+	pwrmode.mode = Mode;
+	pwrmode.flag_low_traffic_en = 0;
+	pwrmode.flag_lpnav_en = 0;
+	pwrmode.flag_rf_low_snr_en = 0;
+	pwrmode.flag_dps_en = 0;
+	pwrmode.bcn_rx_en = 0;
+	pwrmode.bcn_to = 0;
+	SET_BITS_TO_LE_2BYTE((u8 *)(&pwrmode) + 8, 0, 16,
+			mac->vif->bss_conf.beacon_int);
+	pwrmode.app_itv = 0;
+	pwrmode.awake_bcn_itvl = ppsc->reg_max_lps_awakeintvl;
+	pwrmode.smart_ps = 1;
+	pwrmode.bcn_pass_period = 10;
+
+	/* Set beacon pass count */
+	if (pwrmode.mode == FW_PS_MIN_MODE)
+		max_wakeup_period = mac->vif->bss_conf.beacon_int;
+	else if (pwrmode.mode == FW_PS_MAX_MODE)
+		max_wakeup_period = mac->vif->bss_conf.beacon_int *
+			mac->vif->bss_conf.dtim_period;
+
+	if (max_wakeup_period >= 500)
+		pwrmode.bcn_pass_cnt = 1;
+	else if ((max_wakeup_period >= 300) && (max_wakeup_period < 500))
+		pwrmode.bcn_pass_cnt = 2;
+	else if ((max_wakeup_period >= 200) && (max_wakeup_period < 300))
+		pwrmode.bcn_pass_cnt = 3;
+	else if ((max_wakeup_period >= 20) && (max_wakeup_period < 200))
+		pwrmode.bcn_pass_cnt = 5;
+	else
+		pwrmode.bcn_pass_cnt = 1;
+
+	_rtl92s_firmware_set_h2c_cmd(hw, FW_H2C_SETPWRMODE, (u8 *)&pwrmode);
+
+}
+
+void rtl92s_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw,
+		u8 mstatus, u8 ps_qosinfo)
+{
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct h2c_joinbss_rpt_parm joinbss_rpt;
+
+	joinbss_rpt.opmode = mstatus;
+	joinbss_rpt.ps_qos_info = ps_qosinfo;
+	joinbss_rpt.bssid[0] = mac->bssid[0];
+	joinbss_rpt.bssid[1] = mac->bssid[1];
+	joinbss_rpt.bssid[2] = mac->bssid[2];
+	joinbss_rpt.bssid[3] = mac->bssid[3];
+	joinbss_rpt.bssid[4] = mac->bssid[4];
+	joinbss_rpt.bssid[5] = mac->bssid[5];
+	SET_BITS_TO_LE_2BYTE((u8 *)(&joinbss_rpt) + 8, 0, 16,
+			mac->vif->bss_conf.beacon_int);
+	SET_BITS_TO_LE_2BYTE((u8 *)(&joinbss_rpt) + 10, 0, 16, mac->assoc_id);
+
+	_rtl92s_firmware_set_h2c_cmd(hw, FW_H2C_JOINBSSRPT, (u8 *)&joinbss_rpt);
+}
+
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/fw.h b/drivers/net/wireless/rtlwifi/rtl8192se/fw.h
new file mode 100644
index 00000000000..74cc503efe8
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/fw.h
@@ -0,0 +1,375 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+#ifndef __REALTEK_FIRMWARE92S_H__
+#define __REALTEK_FIRMWARE92S_H__
+
+#define RTL8190_MAX_FIRMWARE_CODE_SIZE		64000
+#define RTL8190_CPU_START_OFFSET		0x80
+/* Firmware Local buffer size. 64k */
+#define	MAX_FIRMWARE_CODE_SIZE			0xFF00
+
+#define	RT_8192S_FIRMWARE_HDR_SIZE		80
+#define RT_8192S_FIRMWARE_HDR_EXCLUDE_PRI_SIZE	32
+
+/* support till 64 bit bus width OS */
+#define MAX_DEV_ADDR_SIZE			8
+#define MAX_FIRMWARE_INFORMATION_SIZE		32
+#define MAX_802_11_HEADER_LENGTH		(40 + \
+						MAX_FIRMWARE_INFORMATION_SIZE)
+#define ENCRYPTION_MAX_OVERHEAD			128
+#define MAX_FRAGMENT_COUNT			8
+#define MAX_TRANSMIT_BUFFER_SIZE		(1600 + \
+						(MAX_802_11_HEADER_LENGTH + \
+						ENCRYPTION_MAX_OVERHEAD) *\
+						MAX_FRAGMENT_COUNT)
+
+#define H2C_TX_CMD_HDR_LEN			8
+
+/* The following DM control code are for Reg0x364, */
+#define	FW_DIG_ENABLE_CTL			BIT(0)
+#define	FW_HIGH_PWR_ENABLE_CTL			BIT(1)
+#define	FW_SS_CTL				BIT(2)
+#define	FW_RA_INIT_CTL				BIT(3)
+#define	FW_RA_BG_CTL				BIT(4)
+#define	FW_RA_N_CTL				BIT(5)
+#define	FW_PWR_TRK_CTL				BIT(6)
+#define	FW_IQK_CTL				BIT(7)
+#define	FW_FA_CTL				BIT(8)
+#define	FW_DRIVER_CTRL_DM_CTL			BIT(9)
+#define	FW_PAPE_CTL_BY_SW_HW			BIT(10)
+#define	FW_DISABLE_ALL_DM			0
+#define	FW_PWR_TRK_PARAM_CLR			0x0000ffff
+#define	FW_RA_PARAM_CLR				0xffff0000
+
+enum desc_packet_type {
+	DESC_PACKET_TYPE_INIT = 0,
+	DESC_PACKET_TYPE_NORMAL = 1,
+};
+
+/* 8-bytes alignment required */
+struct fw_priv {
+	/* --- long word 0 ---- */
+	/* 0x12: CE product, 0x92: IT product */
+	u8 signature_0;
+	/* 0x87: CE product, 0x81: IT product */
+	u8 signature_1;
+	/* 0x81: PCI-AP, 01:PCIe, 02: 92S-U,
+	 * 0x82: USB-AP, 0x12: 72S-U, 03:SDIO */
+	u8 hci_sel;
+	/* the same value as reigster value  */
+	u8 chip_version;
+	/* customer  ID low byte */
+	u8 customer_id_0;
+	/* customer  ID high byte */
+	u8 customer_id_1;
+	/* 0x11:  1T1R, 0x12: 1T2R,
+	 * 0x92: 1T2R turbo, 0x22: 2T2R */
+	u8 rf_config;
+	/* 4: 4EP, 6: 6EP, 11: 11EP */
+	u8 usb_ep_num;
+
+	/* --- long word 1 ---- */
+	/* regulatory class bit map 0 */
+	u8 regulatory_class_0;
+	/* regulatory class bit map 1 */
+	u8 regulatory_class_1;
+	/* regulatory class bit map 2 */
+	u8 regulatory_class_2;
+	/* regulatory class bit map 3 */
+	u8 regulatory_class_3;
+	/* 0:SWSI, 1:HWSI, 2:HWPI */
+	u8 rfintfs;
+	u8 def_nettype;
+	u8 rsvd010;
+	u8 rsvd011;
+
+	/* --- long word 2 ---- */
+	/* 0x00: normal, 0x03: MACLBK, 0x01: PHYLBK */
+	u8 lbk_mode;
+	/* 1: for MP use, 0: for normal
+	 * driver (to be discussed) */
+	u8 mp_mode;
+	u8 rsvd020;
+	u8 rsvd021;
+	u8 rsvd022;
+	u8 rsvd023;
+	u8 rsvd024;
+	u8 rsvd025;
+
+	/* --- long word 3 ---- */
+	/* QoS enable */
+	u8 qos_en;
+	/* 40MHz BW enable */
+	/* 4181 convert AMSDU to AMPDU, 0: disable */
+	u8 bw_40mhz_en;
+	u8 amsdu2ampdu_en;
+	/* 11n AMPDU enable */
+	u8 ampdu_en;
+	/* FW offloads, 0: driver handles */
+	u8 rate_control_offload;
+	/* FW offloads, 0: driver handles */
+	u8 aggregation_offload;
+	u8 rsvd030;
+	u8 rsvd031;
+
+	/* --- long word 4 ---- */
+	/* 1. FW offloads, 0: driver handles */
+	u8 beacon_offload;
+	/* 2. FW offloads, 0: driver handles */
+	u8 mlme_offload;
+	/* 3. FW offloads, 0: driver handles */
+	u8 hwpc_offload;
+	/* 4. FW offloads, 0: driver handles */
+	u8 tcp_checksum_offload;
+	/* 5. FW offloads, 0: driver handles */
+	u8 tcp_offload;
+	/* 6. FW offloads, 0: driver handles */
+	u8 ps_control_offload;
+	/* 7. FW offloads, 0: driver handles */
+	u8 wwlan_offload;
+	u8 rsvd040;
+
+	/* --- long word 5 ---- */
+	/* tcp tx packet length low byte */
+	u8 tcp_tx_frame_len_L;
+	/* tcp tx packet length high byte */
+	u8 tcp_tx_frame_len_H;
+	/* tcp rx packet length low byte */
+	u8 tcp_rx_frame_len_L;
+	/* tcp rx packet length high byte */
+	u8 tcp_rx_frame_len_H;
+	u8 rsvd050;
+	u8 rsvd051;
+	u8 rsvd052;
+	u8 rsvd053;
+};
+
+/* 8-byte alinment required */
+struct fw_hdr {
+
+	/* --- LONG WORD 0 ---- */
+	u16 signature;
+	/* 0x8000 ~ 0x8FFF for FPGA version,
+	 * 0x0000 ~ 0x7FFF for ASIC version, */
+	u16 version;
+	/* define the size of boot loader */
+	u32 dmem_size;
+
+
+	/* --- LONG WORD 1 ---- */
+	/* define the size of FW in IMEM */
+	u32 img_imem_size;
+	/* define the size of FW in SRAM */
+	u32 img_sram_size;
+
+	/* --- LONG WORD 2 ---- */
+	/* define the size of DMEM variable */
+	u32 fw_priv_size;
+	u32 rsvd0;
+
+	/* --- LONG WORD 3 ---- */
+	u32 rsvd1;
+	u32 rsvd2;
+
+	struct fw_priv fwpriv;
+
+} ;
+
+enum fw_status {
+	FW_STATUS_INIT = 0,
+	FW_STATUS_LOAD_IMEM = 1,
+	FW_STATUS_LOAD_EMEM = 2,
+	FW_STATUS_LOAD_DMEM = 3,
+	FW_STATUS_READY = 4,
+};
+
+struct rt_firmware {
+	struct fw_hdr *pfwheader;
+	enum fw_status fwstatus;
+	u16 firmwareversion;
+	u8 fw_imem[RTL8190_MAX_FIRMWARE_CODE_SIZE];
+	u8 fw_emem[RTL8190_MAX_FIRMWARE_CODE_SIZE];
+	u32 fw_imem_len;
+	u32 fw_emem_len;
+	u8 sz_fw_tmpbuffer[164000];
+	u32 sz_fw_tmpbufferlen;
+	u16 cmdpacket_fragthresold;
+};
+
+struct h2c_set_pwrmode_parm {
+	u8 mode;
+	u8 flag_low_traffic_en;
+	u8 flag_lpnav_en;
+	u8 flag_rf_low_snr_en;
+	/* 1: dps, 0: 32k */
+	u8 flag_dps_en;
+	u8 bcn_rx_en;
+	u8 bcn_pass_cnt;
+	/* beacon TO (ms). ¡§=0¡¨ no limit. */
+	u8 bcn_to;
+	u16	bcn_itv;
+	/* only for VOIP mode. */
+	u8 app_itv;
+	u8 awake_bcn_itvl;
+	u8 smart_ps;
+	/* unit: 100 ms */
+	u8 bcn_pass_period;
+};
+
+struct h2c_joinbss_rpt_parm {
+	u8 opmode;
+	u8 ps_qos_info;
+	u8 bssid[6];
+	u16 bcnitv;
+	u16 aid;
+} ;
+
+struct h2c_wpa_ptk {
+	/* EAPOL-Key Key Confirmation Key (KCK) */
+	u8 kck[16];
+	/* EAPOL-Key Key Encryption Key (KEK) */
+	u8 kek[16];
+	/* Temporal Key 1 (TK1) */
+	u8 tk1[16];
+	union {
+		/* Temporal Key 2 (TK2) */
+		u8 tk2[16];
+		struct {
+			u8 tx_mic_key[8];
+			u8 rx_mic_key[8];
+		} athu;
+	} u;
+};
+
+struct h2c_wpa_two_way_parm {
+	/* algorithm TKIP or AES */
+	u8 pairwise_en_alg;
+	u8 group_en_alg;
+	struct h2c_wpa_ptk wpa_ptk_value;
+} ;
+
+enum h2c_cmd {
+	FW_H2C_SETPWRMODE = 0,
+	FW_H2C_JOINBSSRPT = 1,
+	FW_H2C_WOWLAN_UPDATE_GTK = 2,
+	FW_H2C_WOWLAN_UPDATE_IV = 3,
+	FW_H2C_WOWLAN_OFFLOAD = 4,
+};
+
+enum fw_h2c_cmd {
+	H2C_READ_MACREG_CMD,				/*0*/
+	H2C_WRITE_MACREG_CMD,
+	H2C_READBB_CMD,
+	H2C_WRITEBB_CMD,
+	H2C_READRF_CMD,
+	H2C_WRITERF_CMD,				/*5*/
+	H2C_READ_EEPROM_CMD,
+	H2C_WRITE_EEPROM_CMD,
+	H2C_READ_EFUSE_CMD,
+	H2C_WRITE_EFUSE_CMD,
+	H2C_READ_CAM_CMD,				/*10*/
+	H2C_WRITE_CAM_CMD,
+	H2C_SETBCNITV_CMD,
+	H2C_SETMBIDCFG_CMD,
+	H2C_JOINBSS_CMD,
+	H2C_DISCONNECT_CMD,				/*15*/
+	H2C_CREATEBSS_CMD,
+	H2C_SETOPMode_CMD,
+	H2C_SITESURVEY_CMD,
+	H2C_SETAUTH_CMD,
+	H2C_SETKEY_CMD,					/*20*/
+	H2C_SETSTAKEY_CMD,
+	H2C_SETASSOCSTA_CMD,
+	H2C_DELASSOCSTA_CMD,
+	H2C_SETSTAPWRSTATE_CMD,
+	H2C_SETBASICRATE_CMD,				/*25*/
+	H2C_GETBASICRATE_CMD,
+	H2C_SETDATARATE_CMD,
+	H2C_GETDATARATE_CMD,
+	H2C_SETPHYINFO_CMD,
+	H2C_GETPHYINFO_CMD,				/*30*/
+	H2C_SETPHY_CMD,
+	H2C_GETPHY_CMD,
+	H2C_READRSSI_CMD,
+	H2C_READGAIN_CMD,
+	H2C_SETATIM_CMD,				/*35*/
+	H2C_SETPWRMODE_CMD,
+	H2C_JOINBSSRPT_CMD,
+	H2C_SETRATABLE_CMD,
+	H2C_GETRATABLE_CMD,
+	H2C_GETCCXREPORT_CMD,				/*40*/
+	H2C_GETDTMREPORT_CMD,
+	H2C_GETTXRATESTATICS_CMD,
+	H2C_SETUSBSUSPEND_CMD,
+	H2C_SETH2CLBK_CMD,
+	H2C_TMP1,					/*45*/
+	H2C_WOWLAN_UPDATE_GTK_CMD,
+	H2C_WOWLAN_FW_OFFLOAD,
+	H2C_TMP2,
+	H2C_TMP3,
+	H2C_WOWLAN_UPDATE_IV_CMD,			/*50*/
+	H2C_TMP4,
+	MAX_H2CCMD					/*52*/
+};
+
+/* The following macros are used for FW
+ * CMD map and parameter updated. */
+#define FW_CMD_IO_CLR(rtlpriv, _Bit)				\
+	do {							\
+		udelay(1000);					\
+		rtlpriv->rtlhal.fwcmd_iomap &= (~_Bit);		\
+	} while (0);
+
+#define FW_CMD_IO_UPDATE(rtlpriv, _val)				\
+	rtlpriv->rtlhal.fwcmd_iomap = _val;
+
+#define FW_CMD_IO_SET(rtlpriv, _val)				\
+	do {							\
+		rtl_write_word(rtlpriv, LBUS_MON_ADDR, (u16)_val);	\
+		FW_CMD_IO_UPDATE(rtlpriv, _val);		\
+	} while (0);
+
+#define FW_CMD_PARA_SET(rtlpriv, _val)				\
+	do {							\
+		rtl_write_dword(rtlpriv, LBUS_ADDR_MASK, _val);	\
+		rtlpriv->rtlhal.fwcmd_ioparam = _val;		\
+	} while (0);
+
+#define FW_CMD_IO_QUERY(rtlpriv)				\
+	(u16)(rtlpriv->rtlhal.fwcmd_iomap)
+#define FW_CMD_IO_PARA_QUERY(rtlpriv)				\
+	((u32)(rtlpriv->rtlhal.fwcmd_ioparam))
+
+int rtl92s_download_fw(struct ieee80211_hw *hw);
+void rtl92s_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode);
+void rtl92s_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw,
+				      u8 mstatus, u8 ps_qosinfo);
+
+#endif
+
-- 
cgit v1.2.3


From 24284531497def77d0c3c0de9046880b1c4e6b13 Mon Sep 17 00:00:00 2001
From: Chaoming Li <chaoming_li@realsil.com.cn>
Date: Tue, 3 May 2011 09:48:15 -0500
Subject: rtlwifi: rtl8192se: Merge hardware routines

Merge routines hw.c and hw.h for RTL8192SE.

Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8192se/hw.c | 2512 +++++++++++++++++++++++++++
 drivers/net/wireless/rtlwifi/rtl8192se/hw.h |   79 +
 2 files changed, 2591 insertions(+)
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8192se/hw.c
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8192se/hw.h

diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
new file mode 100644
index 00000000000..2e9005d0454
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
@@ -0,0 +1,2512 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../efuse.h"
+#include "../base.h"
+#include "../regd.h"
+#include "../cam.h"
+#include "../ps.h"
+#include "../pci.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "dm.h"
+#include "fw.h"
+#include "led.h"
+#include "hw.h"
+
+void rtl92se_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	switch (variable) {
+	case HW_VAR_RCR: {
+			*((u32 *) (val)) = rtlpci->receive_config;
+			break;
+		}
+	case HW_VAR_RF_STATE: {
+			*((enum rf_pwrstate *)(val)) = ppsc->rfpwr_state;
+			break;
+		}
+	case HW_VAR_FW_PSMODE_STATUS: {
+			*((bool *) (val)) = ppsc->fw_current_inpsmode;
+			break;
+		}
+	case HW_VAR_CORRECT_TSF: {
+			u64 tsf;
+			u32 *ptsf_low = (u32 *)&tsf;
+			u32 *ptsf_high = ((u32 *)&tsf) + 1;
+
+			*ptsf_high = rtl_read_dword(rtlpriv, (TSFR + 4));
+			*ptsf_low = rtl_read_dword(rtlpriv, TSFR);
+
+			*((u64 *) (val)) = tsf;
+
+			break;
+		}
+	case HW_VAR_MRC: {
+			*((bool *)(val)) = rtlpriv->dm.current_mrc_switch;
+			break;
+		}
+	default: {
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 ("switch case not process\n"));
+			break;
+		}
+	}
+}
+
+void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+	switch (variable) {
+	case HW_VAR_ETHER_ADDR:{
+			rtl_write_dword(rtlpriv, IDR0, ((u32 *)(val))[0]);
+			rtl_write_word(rtlpriv, IDR4, ((u16 *)(val + 4))[0]);
+			break;
+		}
+	case HW_VAR_BASIC_RATE:{
+			u16 rate_cfg = ((u16 *) val)[0];
+			u8 rate_index = 0;
+
+			if (rtlhal->version == VERSION_8192S_ACUT)
+				rate_cfg = rate_cfg & 0x150;
+			else
+				rate_cfg = rate_cfg & 0x15f;
+
+			rate_cfg |= 0x01;
+
+			rtl_write_byte(rtlpriv, RRSR, rate_cfg & 0xff);
+			rtl_write_byte(rtlpriv, RRSR + 1,
+				       (rate_cfg >> 8) & 0xff);
+
+			while (rate_cfg > 0x1) {
+				rate_cfg = (rate_cfg >> 1);
+				rate_index++;
+			}
+			rtl_write_byte(rtlpriv, INIRTSMCS_SEL, rate_index);
+
+			break;
+		}
+	case HW_VAR_BSSID:{
+			rtl_write_dword(rtlpriv, BSSIDR, ((u32 *)(val))[0]);
+			rtl_write_word(rtlpriv, BSSIDR + 4,
+				       ((u16 *)(val + 4))[0]);
+			break;
+		}
+	case HW_VAR_SIFS:{
+			rtl_write_byte(rtlpriv, SIFS_OFDM, val[0]);
+			rtl_write_byte(rtlpriv, SIFS_OFDM + 1, val[1]);
+			break;
+		}
+	case HW_VAR_SLOT_TIME:{
+			u8 e_aci;
+
+			RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+				 ("HW_VAR_SLOT_TIME %x\n", val[0]));
+
+			rtl_write_byte(rtlpriv, SLOT_TIME, val[0]);
+
+			for (e_aci = 0; e_aci < AC_MAX; e_aci++) {
+				rtlpriv->cfg->ops->set_hw_reg(hw,
+						HW_VAR_AC_PARAM,
+						(u8 *)(&e_aci));
+			}
+			break;
+		}
+	case HW_VAR_ACK_PREAMBLE:{
+			u8 reg_tmp;
+			u8 short_preamble = (bool) (*(u8 *) val);
+			reg_tmp = (mac->cur_40_prime_sc) << 5;
+			if (short_preamble)
+				reg_tmp |= 0x80;
+
+			rtl_write_byte(rtlpriv, RRSR + 2, reg_tmp);
+			break;
+		}
+	case HW_VAR_AMPDU_MIN_SPACE:{
+			u8 min_spacing_to_set;
+			u8 sec_min_space;
+
+			min_spacing_to_set = *((u8 *)val);
+			if (min_spacing_to_set <= 7) {
+				if (rtlpriv->sec.pairwise_enc_algorithm ==
+				    NO_ENCRYPTION)
+					sec_min_space = 0;
+				else
+					sec_min_space = 1;
+
+				if (min_spacing_to_set < sec_min_space)
+					min_spacing_to_set = sec_min_space;
+				if (min_spacing_to_set > 5)
+					min_spacing_to_set = 5;
+
+				mac->min_space_cfg =
+						((mac->min_space_cfg & 0xf8) |
+						min_spacing_to_set);
+
+				*val = min_spacing_to_set;
+
+				RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+					 ("Set HW_VAR_AMPDU_MIN_SPACE: %#x\n",
+					  mac->min_space_cfg));
+
+				rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE,
+					       mac->min_space_cfg);
+			}
+			break;
+		}
+	case HW_VAR_SHORTGI_DENSITY:{
+			u8 density_to_set;
+
+			density_to_set = *((u8 *) val);
+			mac->min_space_cfg = rtlpriv->rtlhal.minspace_cfg;
+			mac->min_space_cfg |= (density_to_set << 3);
+
+			RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+				 ("Set HW_VAR_SHORTGI_DENSITY: %#x\n",
+				  mac->min_space_cfg));
+
+			rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE,
+				       mac->min_space_cfg);
+
+			break;
+		}
+	case HW_VAR_AMPDU_FACTOR:{
+			u8 factor_toset;
+			u8 regtoset;
+			u8 factorlevel[18] = {
+				2, 4, 4, 7, 7, 13, 13,
+				13, 2, 7, 7, 13, 13,
+				15, 15, 15, 15, 0};
+			u8 index = 0;
+
+			factor_toset = *((u8 *) val);
+			if (factor_toset <= 3) {
+				factor_toset = (1 << (factor_toset + 2));
+				if (factor_toset > 0xf)
+					factor_toset = 0xf;
+
+				for (index = 0; index < 17; index++) {
+					if (factorlevel[index] > factor_toset)
+						factorlevel[index] =
+								 factor_toset;
+				}
+
+				for (index = 0; index < 8; index++) {
+					regtoset = ((factorlevel[index * 2]) |
+						    (factorlevel[index *
+						    2 + 1] << 4));
+					rtl_write_byte(rtlpriv,
+						       AGGLEN_LMT_L + index,
+						       regtoset);
+				}
+
+				regtoset = ((factorlevel[16]) |
+					    (factorlevel[17] << 4));
+				rtl_write_byte(rtlpriv, AGGLEN_LMT_H, regtoset);
+
+				RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+					 ("Set HW_VAR_AMPDU_FACTOR: %#x\n",
+					  factor_toset));
+			}
+			break;
+		}
+	case HW_VAR_AC_PARAM:{
+			u8 e_aci = *((u8 *) val);
+			rtl92s_dm_init_edca_turbo(hw);
+
+			if (rtlpci->acm_method != eAcmWay2_SW)
+				rtlpriv->cfg->ops->set_hw_reg(hw,
+						 HW_VAR_ACM_CTRL,
+						 (u8 *)(&e_aci));
+			break;
+		}
+	case HW_VAR_ACM_CTRL:{
+			u8 e_aci = *((u8 *) val);
+			union aci_aifsn *p_aci_aifsn = (union aci_aifsn *)(&(
+							mac->ac[0].aifs));
+			u8 acm = p_aci_aifsn->f.acm;
+			u8 acm_ctrl = rtl_read_byte(rtlpriv, AcmHwCtrl);
+
+			acm_ctrl = acm_ctrl | ((rtlpci->acm_method == 2) ?
+				   0x0 : 0x1);
+
+			if (acm) {
+				switch (e_aci) {
+				case AC0_BE:
+					acm_ctrl |= AcmHw_BeqEn;
+					break;
+				case AC2_VI:
+					acm_ctrl |= AcmHw_ViqEn;
+					break;
+				case AC3_VO:
+					acm_ctrl |= AcmHw_VoqEn;
+					break;
+				default:
+					RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+						 ("HW_VAR_ACM_CTRL acm set "
+						  "failed: eACI is %d\n", acm));
+					break;
+				}
+			} else {
+				switch (e_aci) {
+				case AC0_BE:
+					acm_ctrl &= (~AcmHw_BeqEn);
+					break;
+				case AC2_VI:
+					acm_ctrl &= (~AcmHw_ViqEn);
+					break;
+				case AC3_VO:
+					acm_ctrl &= (~AcmHw_BeqEn);
+					break;
+				default:
+					RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+						 ("switch case not process\n"));
+					break;
+				}
+			}
+
+			RT_TRACE(rtlpriv, COMP_QOS, DBG_TRACE,
+				 ("HW_VAR_ACM_CTRL Write 0x%X\n", acm_ctrl));
+			rtl_write_byte(rtlpriv, AcmHwCtrl, acm_ctrl);
+			break;
+		}
+	case HW_VAR_RCR:{
+			rtl_write_dword(rtlpriv, RCR, ((u32 *) (val))[0]);
+			rtlpci->receive_config = ((u32 *) (val))[0];
+			break;
+		}
+	case HW_VAR_RETRY_LIMIT:{
+			u8 retry_limit = ((u8 *) (val))[0];
+
+			rtl_write_word(rtlpriv, RETRY_LIMIT,
+				       retry_limit << RETRY_LIMIT_SHORT_SHIFT |
+				       retry_limit << RETRY_LIMIT_LONG_SHIFT);
+			break;
+		}
+	case HW_VAR_DUAL_TSF_RST: {
+			break;
+		}
+	case HW_VAR_EFUSE_BYTES: {
+			rtlefuse->efuse_usedbytes = *((u16 *) val);
+			break;
+		}
+	case HW_VAR_EFUSE_USAGE: {
+			rtlefuse->efuse_usedpercentage = *((u8 *) val);
+			break;
+		}
+	case HW_VAR_IO_CMD: {
+			break;
+		}
+	case HW_VAR_WPA_CONFIG: {
+			rtl_write_byte(rtlpriv, REG_SECR, *((u8 *) val));
+			break;
+		}
+	case HW_VAR_SET_RPWM:{
+			break;
+		}
+	case HW_VAR_H2C_FW_PWRMODE:{
+			break;
+		}
+	case HW_VAR_FW_PSMODE_STATUS: {
+			ppsc->fw_current_inpsmode = *((bool *) val);
+			break;
+		}
+	case HW_VAR_H2C_FW_JOINBSSRPT:{
+			break;
+		}
+	case HW_VAR_AID:{
+			break;
+		}
+	case HW_VAR_CORRECT_TSF:{
+			break;
+		}
+	case HW_VAR_MRC: {
+			bool bmrc_toset = *((bool *)val);
+			u8 u1bdata = 0;
+
+			if (bmrc_toset) {
+				rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
+					      MASKBYTE0, 0x33);
+				u1bdata = (u8)rtl_get_bbreg(hw,
+						ROFDM1_TRXPATHENABLE,
+						MASKBYTE0);
+				rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE,
+					      MASKBYTE0,
+					      ((u1bdata & 0xf0) | 0x03));
+				u1bdata = (u8)rtl_get_bbreg(hw,
+						ROFDM0_TRXPATHENABLE,
+						MASKBYTE1);
+				rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
+					      MASKBYTE1,
+					      (u1bdata | 0x04));
+
+				/* Update current settings. */
+				rtlpriv->dm.current_mrc_switch = bmrc_toset;
+			} else {
+				rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
+					      MASKBYTE0, 0x13);
+				u1bdata = (u8)rtl_get_bbreg(hw,
+						 ROFDM1_TRXPATHENABLE,
+						 MASKBYTE0);
+				rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE,
+					      MASKBYTE0,
+					      ((u1bdata & 0xf0) | 0x01));
+				u1bdata = (u8)rtl_get_bbreg(hw,
+						ROFDM0_TRXPATHENABLE,
+						MASKBYTE1);
+				rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
+					      MASKBYTE1, (u1bdata & 0xfb));
+
+				/* Update current settings. */
+				rtlpriv->dm.current_mrc_switch = bmrc_toset;
+			}
+
+			break;
+		}
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("switch case not process\n"));
+		break;
+	}
+
+}
+
+void rtl92se_enable_hw_security_config(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 sec_reg_value = 0x0;
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("PairwiseEncAlgorithm = %d "
+		 "GroupEncAlgorithm = %d\n",
+		 rtlpriv->sec.pairwise_enc_algorithm,
+		 rtlpriv->sec.group_enc_algorithm));
+
+	if (rtlpriv->cfg->mod_params->sw_crypto || rtlpriv->sec.use_sw_sec) {
+		RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+			 ("not open hw encryption\n"));
+		return;
+	}
+
+	sec_reg_value = SCR_TXENCENABLE | SCR_RXENCENABLE;
+
+	if (rtlpriv->sec.use_defaultkey) {
+		sec_reg_value |= SCR_TXUSEDK;
+		sec_reg_value |= SCR_RXUSEDK;
+	}
+
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, ("The SECR-value %x\n",
+			sec_reg_value));
+
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_WPA_CONFIG, &sec_reg_value);
+
+}
+
+static u8 _rtl92ce_halset_sysclk(struct ieee80211_hw *hw, u8 data)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 waitcount = 100;
+	bool bresult = false;
+	u8 tmpvalue;
+
+	rtl_write_byte(rtlpriv, SYS_CLKR + 1, data);
+
+	/* Wait the MAC synchronized. */
+	udelay(400);
+
+	/* Check if it is set ready. */
+	tmpvalue = rtl_read_byte(rtlpriv, SYS_CLKR + 1);
+	bresult = ((tmpvalue & BIT(7)) == (data & BIT(7)));
+
+	if ((data & (BIT(6) | BIT(7))) == false) {
+		waitcount = 100;
+		tmpvalue = 0;
+
+		while (1) {
+			waitcount--;
+
+			tmpvalue = rtl_read_byte(rtlpriv, SYS_CLKR + 1);
+			if ((tmpvalue & BIT(6)))
+				break;
+
+			printk(KERN_ERR "wait for BIT(6) return value %x\n",
+			       tmpvalue);
+			if (waitcount == 0)
+				break;
+
+			udelay(10);
+		}
+
+		if (waitcount == 0)
+			bresult = false;
+		else
+			bresult = true;
+	}
+
+	return bresult;
+}
+
+void rtl8192se_gpiobit3_cfg_inputmode(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 u1tmp;
+
+	/* The following config GPIO function */
+	rtl_write_byte(rtlpriv, MAC_PINMUX_CFG, (GPIOMUX_EN | GPIOSEL_GPIO));
+	u1tmp = rtl_read_byte(rtlpriv, GPIO_IO_SEL);
+
+	/* config GPIO3 to input */
+	u1tmp &= HAL_8192S_HW_GPIO_OFF_MASK;
+	rtl_write_byte(rtlpriv, GPIO_IO_SEL, u1tmp);
+
+}
+
+static u8 _rtl92se_rf_onoff_detect(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 u1tmp;
+	u8 retval = ERFON;
+
+	/* The following config GPIO function */
+	rtl_write_byte(rtlpriv, MAC_PINMUX_CFG, (GPIOMUX_EN | GPIOSEL_GPIO));
+	u1tmp = rtl_read_byte(rtlpriv, GPIO_IO_SEL);
+
+	/* config GPIO3 to input */
+	u1tmp &= HAL_8192S_HW_GPIO_OFF_MASK;
+	rtl_write_byte(rtlpriv, GPIO_IO_SEL, u1tmp);
+
+	/* On some of the platform, driver cannot read correct
+	 * value without delay between Write_GPIO_SEL and Read_GPIO_IN */
+	mdelay(10);
+
+	/* check GPIO3 */
+	u1tmp = rtl_read_byte(rtlpriv, GPIO_IN);
+	retval = (u1tmp & HAL_8192S_HW_GPIO_OFF_BIT) ? ERFON : ERFOFF;
+
+	return retval;
+}
+
+static void _rtl92se_macconfig_before_fwdownload(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+	u8 i;
+	u8 tmpu1b;
+	u16 tmpu2b;
+	u8 pollingcnt = 20;
+
+	if (rtlpci->first_init) {
+		/* Reset PCIE Digital */
+		tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+		tmpu1b &= 0xFE;
+		rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b);
+		udelay(1);
+		rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b | BIT(0));
+	}
+
+	/* Switch to SW IO control */
+	tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
+	if (tmpu1b & BIT(7)) {
+		tmpu1b &= ~(BIT(6) | BIT(7));
+
+		/* Set failed, return to prevent hang. */
+		if (!_rtl92ce_halset_sysclk(hw, tmpu1b))
+			return;
+	}
+
+	rtl_write_byte(rtlpriv, AFE_PLL_CTRL, 0x0);
+	udelay(50);
+	rtl_write_byte(rtlpriv, LDOA15_CTRL, 0x34);
+	udelay(50);
+
+	/* Clear FW RPWM for FW control LPS.*/
+	rtl_write_byte(rtlpriv, RPWM, 0x0);
+
+	/* Reset MAC-IO and CPU and Core Digital BIT(10)/11/15 */
+	tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+	tmpu1b &= 0x73;
+	rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b);
+	/* wait for BIT 10/11/15 to pull high automatically!! */
+	mdelay(1);
+
+	rtl_write_byte(rtlpriv, CMDR, 0);
+	rtl_write_byte(rtlpriv, TCR, 0);
+
+	/* Data sheet not define 0x562!!! Copy from WMAC!!!!! */
+	tmpu1b = rtl_read_byte(rtlpriv, 0x562);
+	tmpu1b |= 0x08;
+	rtl_write_byte(rtlpriv, 0x562, tmpu1b);
+	tmpu1b &= ~(BIT(3));
+	rtl_write_byte(rtlpriv, 0x562, tmpu1b);
+
+	/* Enable AFE clock source */
+	tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL);
+	rtl_write_byte(rtlpriv, AFE_XTAL_CTRL, (tmpu1b | 0x01));
+	/* Delay 1.5ms */
+	mdelay(2);
+	tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL + 1);
+	rtl_write_byte(rtlpriv, AFE_XTAL_CTRL + 1, (tmpu1b & 0xfb));
+
+	/* Enable AFE Macro Block's Bandgap */
+	tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC);
+	rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | BIT(0)));
+	mdelay(1);
+
+	/* Enable AFE Mbias */
+	tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC);
+	rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | 0x02));
+	mdelay(1);
+
+	/* Enable LDOA15 block	*/
+	tmpu1b = rtl_read_byte(rtlpriv, LDOA15_CTRL);
+	rtl_write_byte(rtlpriv, LDOA15_CTRL, (tmpu1b | BIT(0)));
+
+	/* Set Digital Vdd to Retention isolation Path. */
+	tmpu2b = rtl_read_word(rtlpriv, REG_SYS_ISO_CTRL);
+	rtl_write_word(rtlpriv, REG_SYS_ISO_CTRL, (tmpu2b | BIT(11)));
+
+	/* For warm reboot NIC disappera bug. */
+	tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
+	rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(13)));
+
+	rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, 0x68);
+
+	/* Enable AFE PLL Macro Block */
+	/* We need to delay 100u before enabling PLL. */
+	udelay(200);
+	tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL);
+	rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) | BIT(4)));
+
+	/* for divider reset  */
+	udelay(100);
+	rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) |
+		       BIT(4) | BIT(6)));
+	udelay(10);
+	rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) | BIT(4)));
+	udelay(10);
+
+	/* Enable MAC 80MHZ clock  */
+	tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL + 1);
+	rtl_write_byte(rtlpriv, AFE_PLL_CTRL + 1, (tmpu1b | BIT(0)));
+	mdelay(1);
+
+	/* Release isolation AFE PLL & MD */
+	rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL, 0xA6);
+
+	/* Enable MAC clock */
+	tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR);
+	rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b | BIT(12) | BIT(11)));
+
+	/* Enable Core digital and enable IOREG R/W */
+	tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
+	rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(11)));
+
+	tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+	rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b & ~(BIT(7)));
+
+	/* enable REG_EN */
+	rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(11) | BIT(15)));
+
+	/* Switch the control path. */
+	tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR);
+	rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b & (~BIT(2))));
+
+	tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
+	tmpu1b = ((tmpu1b | BIT(7)) & (~BIT(6)));
+	if (!_rtl92ce_halset_sysclk(hw, tmpu1b))
+		return; /* Set failed, return to prevent hang. */
+
+	rtl_write_word(rtlpriv, CMDR, 0x07FC);
+
+	/* MH We must enable the section of code to prevent load IMEM fail. */
+	/* Load MAC register from WMAc temporarily We simulate macreg. */
+	/* txt HW will provide MAC txt later  */
+	rtl_write_byte(rtlpriv, 0x6, 0x30);
+	rtl_write_byte(rtlpriv, 0x49, 0xf0);
+
+	rtl_write_byte(rtlpriv, 0x4b, 0x81);
+
+	rtl_write_byte(rtlpriv, 0xb5, 0x21);
+
+	rtl_write_byte(rtlpriv, 0xdc, 0xff);
+	rtl_write_byte(rtlpriv, 0xdd, 0xff);
+	rtl_write_byte(rtlpriv, 0xde, 0xff);
+	rtl_write_byte(rtlpriv, 0xdf, 0xff);
+
+	rtl_write_byte(rtlpriv, 0x11a, 0x00);
+	rtl_write_byte(rtlpriv, 0x11b, 0x00);
+
+	for (i = 0; i < 32; i++)
+		rtl_write_byte(rtlpriv, INIMCS_SEL + i, 0x1b);
+
+	rtl_write_byte(rtlpriv, 0x236, 0xff);
+
+	rtl_write_byte(rtlpriv, 0x503, 0x22);
+
+	if (ppsc->support_aspm && !ppsc->support_backdoor)
+		rtl_write_byte(rtlpriv, 0x560, 0x40);
+	else
+		rtl_write_byte(rtlpriv, 0x560, 0x00);
+
+	rtl_write_byte(rtlpriv, DBG_PORT, 0x91);
+
+	/* Set RX Desc Address */
+	rtl_write_dword(rtlpriv, RDQDA, rtlpci->rx_ring[RX_MPDU_QUEUE].dma);
+	rtl_write_dword(rtlpriv, RCDA, rtlpci->rx_ring[RX_CMD_QUEUE].dma);
+
+	/* Set TX Desc Address */
+	rtl_write_dword(rtlpriv, TBKDA, rtlpci->tx_ring[BK_QUEUE].dma);
+	rtl_write_dword(rtlpriv, TBEDA, rtlpci->tx_ring[BE_QUEUE].dma);
+	rtl_write_dword(rtlpriv, TVIDA, rtlpci->tx_ring[VI_QUEUE].dma);
+	rtl_write_dword(rtlpriv, TVODA, rtlpci->tx_ring[VO_QUEUE].dma);
+	rtl_write_dword(rtlpriv, TBDA, rtlpci->tx_ring[BEACON_QUEUE].dma);
+	rtl_write_dword(rtlpriv, TCDA, rtlpci->tx_ring[TXCMD_QUEUE].dma);
+	rtl_write_dword(rtlpriv, TMDA, rtlpci->tx_ring[MGNT_QUEUE].dma);
+	rtl_write_dword(rtlpriv, THPDA, rtlpci->tx_ring[HIGH_QUEUE].dma);
+	rtl_write_dword(rtlpriv, HDA, rtlpci->tx_ring[HCCA_QUEUE].dma);
+
+	rtl_write_word(rtlpriv, CMDR, 0x37FC);
+
+	/* To make sure that TxDMA can ready to download FW. */
+	/* We should reset TxDMA if IMEM RPT was not ready. */
+	do {
+		tmpu1b = rtl_read_byte(rtlpriv, TCR);
+		if ((tmpu1b & TXDMA_INIT_VALUE) == TXDMA_INIT_VALUE)
+			break;
+
+		udelay(5);
+	} while (pollingcnt--);
+
+	if (pollingcnt <= 0) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("Polling TXDMA_INIT_VALUE "
+			 "timeout!! Current TCR(%#x)\n", tmpu1b));
+		tmpu1b = rtl_read_byte(rtlpriv, CMDR);
+		rtl_write_byte(rtlpriv, CMDR, tmpu1b & (~TXDMA_EN));
+		udelay(2);
+		/* Reset TxDMA */
+		rtl_write_byte(rtlpriv, CMDR, tmpu1b | TXDMA_EN);
+	}
+
+	/* After MACIO reset,we must refresh LED state. */
+	if ((ppsc->rfoff_reason == RF_CHANGE_BY_IPS) ||
+	   (ppsc->rfoff_reason == 0)) {
+		struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+		struct rtl_led *pLed0 = &(pcipriv->ledctl.sw_led0);
+		enum rf_pwrstate rfpwr_state_toset;
+		rfpwr_state_toset = _rtl92se_rf_onoff_detect(hw);
+
+		if (rfpwr_state_toset == ERFON)
+			rtl92se_sw_led_on(hw, pLed0);
+	}
+}
+
+static void _rtl92se_macconfig_after_fwdownload(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	u8 i;
+	u16 tmpu2b;
+
+	/* 1. System Configure Register (Offset: 0x0000 - 0x003F) */
+
+	/* 2. Command Control Register (Offset: 0x0040 - 0x004F) */
+	/* Turn on 0x40 Command register */
+	rtl_write_word(rtlpriv, CMDR, (BBRSTN | BB_GLB_RSTN |
+			SCHEDULE_EN | MACRXEN | MACTXEN | DDMA_EN | FW2HW_EN |
+			RXDMA_EN | TXDMA_EN | HCI_RXDMA_EN | HCI_TXDMA_EN));
+
+	/* Set TCR TX DMA pre 2 FULL enable bit	*/
+	rtl_write_dword(rtlpriv, TCR, rtl_read_dword(rtlpriv, TCR) |
+			TXDMAPRE2FULL);
+
+	/* Set RCR	*/
+	rtl_write_dword(rtlpriv, RCR, rtlpci->receive_config);
+
+	/* 3. MACID Setting Register (Offset: 0x0050 - 0x007F) */
+
+	/* 4. Timing Control Register  (Offset: 0x0080 - 0x009F) */
+	/* Set CCK/OFDM SIFS */
+	/* CCK SIFS shall always be 10us. */
+	rtl_write_word(rtlpriv, SIFS_CCK, 0x0a0a);
+	rtl_write_word(rtlpriv, SIFS_OFDM, 0x1010);
+
+	/* Set AckTimeout */
+	rtl_write_byte(rtlpriv, ACK_TIMEOUT, 0x40);
+
+	/* Beacon related */
+	rtl_write_word(rtlpriv, BCN_INTERVAL, 100);
+	rtl_write_word(rtlpriv, ATIMWND, 2);
+
+	/* 5. FIFO Control Register (Offset: 0x00A0 - 0x015F) */
+	/* 5.1 Initialize Number of Reserved Pages in Firmware Queue */
+	/* Firmware allocate now, associate with FW internal setting.!!! */
+
+	/* 5.2 Setting TX/RX page size 0/1/2/3/4=64/128/256/512/1024 */
+	/* 5.3 Set driver info, we only accept PHY status now. */
+	/* 5.4 Set RXDMA arbitration to control RXDMA/MAC/FW R/W for RXFIFO  */
+	rtl_write_byte(rtlpriv, RXDMA, rtl_read_byte(rtlpriv, RXDMA) | BIT(6));
+
+	/* 6. Adaptive Control Register  (Offset: 0x0160 - 0x01CF) */
+	/* Set RRSR to all legacy rate and HT rate
+	 * CCK rate is supported by default.
+	 * CCK rate will be filtered out only when associated
+	 * AP does not support it.
+	 * Only enable ACK rate to OFDM 24M
+	 * Disable RRSR for CCK rate in A-Cut	*/
+
+	if (rtlhal->version == VERSION_8192S_ACUT)
+		rtl_write_byte(rtlpriv, RRSR, 0xf0);
+	else if (rtlhal->version == VERSION_8192S_BCUT)
+		rtl_write_byte(rtlpriv, RRSR, 0xff);
+	rtl_write_byte(rtlpriv, RRSR + 1, 0x01);
+	rtl_write_byte(rtlpriv, RRSR + 2, 0x00);
+
+	/* A-Cut IC do not support CCK rate. We forbid ARFR to */
+	/* fallback to CCK rate */
+	for (i = 0; i < 8; i++) {
+		/*Disable RRSR for CCK rate in A-Cut */
+		if (rtlhal->version == VERSION_8192S_ACUT)
+			rtl_write_dword(rtlpriv, ARFR0 + i * 4, 0x1f0ff0f0);
+	}
+
+	/* Different rate use different AMPDU size */
+	/* MCS32/ MCS15_SG use max AMPDU size 15*2=30K */
+	rtl_write_byte(rtlpriv, AGGLEN_LMT_H, 0x0f);
+	/* MCS0/1/2/3 use max AMPDU size 4*2=8K */
+	rtl_write_word(rtlpriv, AGGLEN_LMT_L, 0x7442);
+	/* MCS4/5 use max AMPDU size 8*2=16K 6/7 use 10*2=20K */
+	rtl_write_word(rtlpriv, AGGLEN_LMT_L + 2, 0xddd7);
+	/* MCS8/9 use max AMPDU size 8*2=16K 10/11 use 10*2=20K */
+	rtl_write_word(rtlpriv, AGGLEN_LMT_L + 4, 0xd772);
+	/* MCS12/13/14/15 use max AMPDU size 15*2=30K */
+	rtl_write_word(rtlpriv, AGGLEN_LMT_L + 6, 0xfffd);
+
+	/* Set Data / Response auto rate fallack retry count */
+	rtl_write_dword(rtlpriv, DARFRC, 0x04010000);
+	rtl_write_dword(rtlpriv, DARFRC + 4, 0x09070605);
+	rtl_write_dword(rtlpriv, RARFRC, 0x04010000);
+	rtl_write_dword(rtlpriv, RARFRC + 4, 0x09070605);
+
+	/* 7. EDCA Setting Register (Offset: 0x01D0 - 0x01FF) */
+	/* Set all rate to support SG */
+	rtl_write_word(rtlpriv, SG_RATE, 0xFFFF);
+
+	/* 8. WMAC, BA, and CCX related Register (Offset: 0x0200 - 0x023F) */
+	/* Set NAV protection length */
+	rtl_write_word(rtlpriv, NAV_PROT_LEN, 0x0080);
+	/* CF-END Threshold */
+	rtl_write_byte(rtlpriv, CFEND_TH, 0xFF);
+	/* Set AMPDU minimum space */
+	rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE, 0x07);
+	/* Set TXOP stall control for several queue/HI/BCN/MGT/ */
+	rtl_write_byte(rtlpriv, TXOP_STALL_CTRL, 0x00);
+
+	/* 9. Security Control Register (Offset: 0x0240 - 0x025F) */
+	/* 10. Power Save Control Register (Offset: 0x0260 - 0x02DF) */
+	/* 11. General Purpose Register (Offset: 0x02E0 - 0x02FF) */
+	/* 12. Host Interrupt Status Register (Offset: 0x0300 - 0x030F) */
+	/* 13. Test Mode and Debug Control Register (Offset: 0x0310 - 0x034F) */
+
+	/* 14. Set driver info, we only accept PHY status now. */
+	rtl_write_byte(rtlpriv, RXDRVINFO_SZ, 4);
+
+	/* 15. For EEPROM R/W Workaround */
+	/* 16. For EFUSE to share REG_SYS_FUNC_EN with EEPROM!!! */
+	tmpu2b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN);
+	rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, tmpu2b | BIT(13));
+	tmpu2b = rtl_read_byte(rtlpriv, REG_SYS_ISO_CTRL);
+	rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL, tmpu2b & (~BIT(8)));
+
+	/* 17. For EFUSE */
+	/* We may R/W EFUSE in EEPROM mode */
+	if (rtlefuse->epromtype == EEPROM_BOOT_EFUSE) {
+		u8	tempval;
+
+		tempval = rtl_read_byte(rtlpriv, REG_SYS_ISO_CTRL + 1);
+		tempval &= 0xFE;
+		rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, tempval);
+
+		/* Change Program timing */
+		rtl_write_byte(rtlpriv, REG_EFUSE_CTRL + 3, 0x72);
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("EFUSE CONFIG OK\n"));
+	}
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("OK\n"));
+
+}
+
+static void _rtl92se_hw_configure(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+	u8 reg_bw_opmode = 0;
+	u32 reg_ratr = 0, reg_rrsr = 0;
+	u8 regtmp = 0;
+
+	reg_bw_opmode = BW_OPMODE_20MHZ;
+	reg_ratr = RATE_ALL_CCK | RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS |
+				RATE_ALL_OFDM_2SS;
+	reg_rrsr = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
+
+	regtmp = rtl_read_byte(rtlpriv, INIRTSMCS_SEL);
+	reg_rrsr = ((reg_rrsr & 0x000fffff) << 8) | regtmp;
+	rtl_write_dword(rtlpriv, INIRTSMCS_SEL, reg_rrsr);
+	rtl_write_byte(rtlpriv, BW_OPMODE, reg_bw_opmode);
+
+	/* Set Retry Limit here */
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RETRY_LIMIT,
+			(u8 *)(&rtlpci->shortretry_limit));
+
+	rtl_write_byte(rtlpriv, MLT, 0x8f);
+
+	/* For Min Spacing configuration. */
+	switch (rtlphy->rf_type) {
+	case RF_1T2R:
+	case RF_1T1R:
+		rtlhal->minspace_cfg = (MAX_MSS_DENSITY_1T << 3);
+		break;
+	case RF_2T2R:
+	case RF_2T2R_GREEN:
+		rtlhal->minspace_cfg = (MAX_MSS_DENSITY_2T << 3);
+		break;
+	}
+	rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE, rtlhal->minspace_cfg);
+}
+
+int rtl92se_hw_init(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 tmp_byte = 0;
+
+	bool rtstatus = true;
+	u8 tmp_u1b;
+	int err = false;
+	u8 i;
+	int wdcapra_add[] = {
+		EDCAPARA_BE, EDCAPARA_BK,
+		EDCAPARA_VI, EDCAPARA_VO};
+	u8 secr_value = 0x0;
+
+	rtlpci->being_init_adapter = true;
+
+	rtlpriv->intf_ops->disable_aspm(hw);
+
+	/* 1. MAC Initialize */
+	/* Before FW download, we have to set some MAC register */
+	_rtl92se_macconfig_before_fwdownload(hw);
+
+	rtlhal->version = (enum version_8192s)((rtl_read_dword(rtlpriv,
+			PMC_FSM) >> 16) & 0xF);
+
+	rtl8192se_gpiobit3_cfg_inputmode(hw);
+
+	/* 2. download firmware */
+	rtstatus = rtl92s_download_fw(hw);
+	if (!rtstatus) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 ("Failed to download FW. "
+			 "Init HW without FW now.., Please copy FW into"
+			 "/lib/firmware/rtlwifi\n"));
+		rtlhal->fw_ready = false;
+	} else {
+		rtlhal->fw_ready = true;
+	}
+
+	/* After FW download, we have to reset MAC register */
+	_rtl92se_macconfig_after_fwdownload(hw);
+
+	/*Retrieve default FW Cmd IO map. */
+	rtlhal->fwcmd_iomap =	rtl_read_word(rtlpriv, LBUS_MON_ADDR);
+	rtlhal->fwcmd_ioparam = rtl_read_dword(rtlpriv, LBUS_ADDR_MASK);
+
+	/* 3. Initialize MAC/PHY Config by MACPHY_reg.txt */
+	if (rtl92s_phy_mac_config(hw) != true) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("MAC Config failed\n"));
+		return rtstatus;
+	}
+
+	/* Make sure BB/RF write OK. We should prevent enter IPS. radio off. */
+	/* We must set flag avoid BB/RF config period later!! */
+	rtl_write_dword(rtlpriv, CMDR, 0x37FC);
+
+	/* 4. Initialize BB After MAC Config PHY_reg.txt, AGC_Tab.txt */
+	if (rtl92s_phy_bb_config(hw) != true) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, ("BB Config failed\n"));
+		return rtstatus;
+	}
+
+	/* 5. Initiailze RF RAIO_A.txt RF RAIO_B.txt */
+	/* Before initalizing RF. We can not use FW to do RF-R/W. */
+
+	rtlphy->rf_mode = RF_OP_BY_SW_3WIRE;
+
+	/* RF Power Save */
+#if 0
+	/* H/W or S/W RF OFF before sleep. */
+	if (rtlpriv->psc.rfoff_reason > RF_CHANGE_BY_PS) {
+		u32 rfoffreason = rtlpriv->psc.rfoff_reason;
+
+		rtlpriv->psc.rfoff_reason = RF_CHANGE_BY_INIT;
+		rtlpriv->psc.rfpwr_state = ERFON;
+		rtl_ps_set_rf_state(hw, ERFOFF, rfoffreason, true);
+	} else {
+		/* gpio radio on/off is out of adapter start */
+		if (rtlpriv->psc.hwradiooff == false) {
+			rtlpriv->psc.rfpwr_state = ERFON;
+			rtlpriv->psc.rfoff_reason = 0;
+		}
+	}
+#endif
+
+	/* Before RF-R/W we must execute the IO from Scott's suggestion. */
+	rtl_write_byte(rtlpriv, AFE_XTAL_CTRL + 1, 0xDB);
+	if (rtlhal->version == VERSION_8192S_ACUT)
+		rtl_write_byte(rtlpriv, SPS1_CTRL + 3, 0x07);
+	else
+		rtl_write_byte(rtlpriv, RF_CTRL, 0x07);
+
+	if (rtl92s_phy_rf_config(hw) != true) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("RF Config failed\n"));
+		return rtstatus;
+	}
+
+	/* After read predefined TXT, we must set BB/MAC/RF
+	 * register as our requirement */
+
+	rtlphy->rfreg_chnlval[0] = rtl92s_phy_query_rf_reg(hw,
+							   (enum radio_path)0,
+							   RF_CHNLBW,
+							   RFREG_OFFSET_MASK);
+	rtlphy->rfreg_chnlval[1] = rtl92s_phy_query_rf_reg(hw,
+							   (enum radio_path)1,
+							   RF_CHNLBW,
+							   RFREG_OFFSET_MASK);
+
+	/*---- Set CCK and OFDM Block "ON"----*/
+	rtl_set_bbreg(hw, RFPGA0_RFMOD, BCCKEN, 0x1);
+	rtl_set_bbreg(hw, RFPGA0_RFMOD, BOFDMEN, 0x1);
+
+	/*3 Set Hardware(Do nothing now) */
+	_rtl92se_hw_configure(hw);
+
+	/* Read EEPROM TX power index and PHY_REG_PG.txt to capture correct */
+	/* TX power index for different rate set. */
+	/* Get original hw reg values */
+	rtl92s_phy_get_hw_reg_originalvalue(hw);
+	/* Write correct tx power index */
+	rtl92s_phy_set_txpower(hw, rtlphy->current_channel);
+
+	/* We must set MAC address after firmware download. */
+	for (i = 0; i < 6; i++)
+		rtl_write_byte(rtlpriv, MACIDR0 + i, rtlefuse->dev_addr[i]);
+
+	/* EEPROM R/W workaround */
+	tmp_u1b = rtl_read_byte(rtlpriv, MAC_PINMUX_CFG);
+	rtl_write_byte(rtlpriv, MAC_PINMUX_CFG, tmp_u1b & (~BIT(3)));
+
+	rtl_write_byte(rtlpriv, 0x4d, 0x0);
+
+	if (hal_get_firmwareversion(rtlpriv) >= 0x49) {
+		tmp_byte = rtl_read_byte(rtlpriv, FW_RSVD_PG_CRTL) & (~BIT(4));
+		tmp_byte = tmp_byte | BIT(5);
+		rtl_write_byte(rtlpriv, FW_RSVD_PG_CRTL, tmp_byte);
+		rtl_write_dword(rtlpriv, TXDESC_MSK, 0xFFFFCFFF);
+	}
+
+	/* We enable high power and RA related mechanism after NIC
+	 * initialized. */
+	rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_INIT);
+
+	/* Add to prevent ASPM bug. */
+	/* Always enable hst and NIC clock request. */
+	rtl92s_phy_switch_ephy_parameter(hw);
+
+	/* Security related
+	 * 1. Clear all H/W keys.
+	 * 2. Enable H/W encryption/decryption. */
+	rtl_cam_reset_all_entry(hw);
+	secr_value |= SCR_TXENCENABLE;
+	secr_value |= SCR_RXENCENABLE;
+	secr_value |= SCR_NOSKMC;
+	rtl_write_byte(rtlpriv, REG_SECR, secr_value);
+
+	for (i = 0; i < 4; i++)
+		rtl_write_dword(rtlpriv, wdcapra_add[i], 0x5e4322);
+
+	if (rtlphy->rf_type == RF_1T2R) {
+		bool mrc2set = true;
+		/* Turn on B-Path */
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_MRC, (u8 *)&mrc2set);
+	}
+
+	rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_ON);
+	rtl92s_dm_init(hw);
+	rtlpci->being_init_adapter = false;
+
+	return err;
+}
+
+void rtl92se_set_mac_addr(struct rtl_io *io, const u8 * addr)
+{
+}
+
+void rtl92se_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	u32 reg_rcr = rtlpci->receive_config;
+
+	if (rtlpriv->psc.rfpwr_state != ERFON)
+		return;
+
+	if (check_bssid == true) {
+		reg_rcr |= (RCR_CBSSID);
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
+	} else if (check_bssid == false) {
+		reg_rcr &= (~RCR_CBSSID);
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
+	}
+
+}
+
+static int _rtl92se_set_media_status(struct ieee80211_hw *hw,
+				     enum nl80211_iftype type)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 bt_msr = rtl_read_byte(rtlpriv, MSR);
+	enum led_ctl_mode ledaction = LED_CTL_NO_LINK;
+	u32 temp;
+	bt_msr &= ~MSR_LINK_MASK;
+
+	switch (type) {
+	case NL80211_IFTYPE_UNSPECIFIED:
+		bt_msr |= (MSR_LINK_NONE << MSR_LINK_SHIFT);
+		ledaction = LED_CTL_LINK;
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("Set Network type to NO LINK!\n"));
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		bt_msr |= (MSR_LINK_ADHOC << MSR_LINK_SHIFT);
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("Set Network type to Ad Hoc!\n"));
+		break;
+	case NL80211_IFTYPE_STATION:
+		bt_msr |= (MSR_LINK_MANAGED << MSR_LINK_SHIFT);
+		ledaction = LED_CTL_LINK;
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("Set Network type to STA!\n"));
+		break;
+	case NL80211_IFTYPE_AP:
+		bt_msr |= (MSR_LINK_MASTER << MSR_LINK_SHIFT);
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("Set Network type to AP!\n"));
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("Network type %d not support!\n", type));
+		return 1;
+		break;
+
+	}
+
+	rtl_write_byte(rtlpriv, (MSR), bt_msr);
+
+	temp = rtl_read_dword(rtlpriv, TCR);
+	rtl_write_dword(rtlpriv, TCR, temp & (~BIT(8)));
+	rtl_write_dword(rtlpriv, TCR, temp | BIT(8));
+
+
+	return 0;
+}
+
+/* HW_VAR_MEDIA_STATUS & HW_VAR_CECHK_BSSID */
+int rtl92se_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	if (_rtl92se_set_media_status(hw, type))
+		return -EOPNOTSUPP;
+
+	if (rtlpriv->mac80211.link_state == MAC80211_LINKED) {
+		if (type != NL80211_IFTYPE_AP)
+			rtl92se_set_check_bssid(hw, true);
+	} else {
+		rtl92se_set_check_bssid(hw, false);
+	}
+
+	return 0;
+}
+
+/* don't set REG_EDCA_BE_PARAM here because mac80211 will send pkt when scan */
+void rtl92se_set_qos(struct ieee80211_hw *hw, int aci)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	rtl92s_dm_init_edca_turbo(hw);
+
+	switch (aci) {
+	case AC1_BK:
+		rtl_write_dword(rtlpriv, EDCAPARA_BK, 0xa44f);
+		break;
+	case AC0_BE:
+		/* rtl_write_dword(rtlpriv, EDCAPARA_BE, u4b_ac_param); */
+		break;
+	case AC2_VI:
+		rtl_write_dword(rtlpriv, EDCAPARA_VI, 0x5e4322);
+		break;
+	case AC3_VO:
+		rtl_write_dword(rtlpriv, EDCAPARA_VO, 0x2f3222);
+		break;
+	default:
+		RT_ASSERT(false, ("invalid aci: %d !\n", aci));
+		break;
+	}
+}
+
+void rtl92se_enable_interrupt(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	rtl_write_dword(rtlpriv, INTA_MASK, rtlpci->irq_mask[0]);
+	/* Support Bit 32-37(Assign as Bit 0-5) interrupt setting now */
+	rtl_write_dword(rtlpriv, INTA_MASK + 4, rtlpci->irq_mask[1] & 0x3F);
+
+	rtlpci->irq_enabled = true;
+}
+
+void rtl92se_disable_interrupt(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	rtl_write_dword(rtlpriv, INTA_MASK, 0);
+	rtl_write_dword(rtlpriv, INTA_MASK + 4, 0);
+
+	rtlpci->irq_enabled = false;
+}
+
+
+static u8 _rtl92s_set_sysclk(struct ieee80211_hw *hw, u8 data)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 waitcnt = 100;
+	bool result = false;
+	u8 tmp;
+
+	rtl_write_byte(rtlpriv, SYS_CLKR + 1, data);
+
+	/* Wait the MAC synchronized. */
+	udelay(400);
+
+	/* Check if it is set ready. */
+	tmp = rtl_read_byte(rtlpriv, SYS_CLKR + 1);
+	result = ((tmp & BIT(7)) == (data & BIT(7)));
+
+	if ((data & (BIT(6) | BIT(7))) == false) {
+		waitcnt = 100;
+		tmp = 0;
+
+		while (1) {
+			waitcnt--;
+			tmp = rtl_read_byte(rtlpriv, SYS_CLKR + 1);
+
+			if ((tmp & BIT(6)))
+				break;
+
+			printk(KERN_ERR "wait for BIT(6) return value %x\n",
+			       tmp);
+
+			if (waitcnt == 0)
+				break;
+			udelay(10);
+		}
+
+		if (waitcnt == 0)
+			result = false;
+		else
+			result = true;
+	}
+
+	return result;
+}
+
+static void _rtl92s_phy_set_rfhalt(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	u8 u1btmp;
+
+	if (rtlhal->driver_going2unload)
+		rtl_write_byte(rtlpriv, 0x560, 0x0);
+
+	/* Power save for BB/RF */
+	u1btmp = rtl_read_byte(rtlpriv, LDOV12D_CTRL);
+	u1btmp |= BIT(0);
+	rtl_write_byte(rtlpriv, LDOV12D_CTRL, u1btmp);
+	rtl_write_byte(rtlpriv, SPS1_CTRL, 0x0);
+	rtl_write_byte(rtlpriv, TXPAUSE, 0xFF);
+	rtl_write_word(rtlpriv, CMDR, 0x57FC);
+	udelay(100);
+	rtl_write_word(rtlpriv, CMDR, 0x77FC);
+	rtl_write_byte(rtlpriv, PHY_CCA, 0x0);
+	udelay(10);
+	rtl_write_word(rtlpriv, CMDR, 0x37FC);
+	udelay(10);
+	rtl_write_word(rtlpriv, CMDR, 0x77FC);
+	udelay(10);
+	rtl_write_word(rtlpriv, CMDR, 0x57FC);
+	rtl_write_word(rtlpriv, CMDR, 0x0000);
+
+	if (rtlhal->driver_going2unload) {
+		u1btmp = rtl_read_byte(rtlpriv, (REG_SYS_FUNC_EN + 1));
+		u1btmp &= ~(BIT(0));
+		rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, u1btmp);
+	}
+
+	u1btmp = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
+
+	/* Add description. After switch control path. register
+	 * after page1 will be invisible. We can not do any IO
+	 * for register>0x40. After resume&MACIO reset, we need
+	 * to remember previous reg content. */
+	if (u1btmp & BIT(7)) {
+		u1btmp &= ~(BIT(6) | BIT(7));
+		if (!_rtl92s_set_sysclk(hw, u1btmp)) {
+			printk(KERN_ERR "Switch ctrl path fail\n");
+			return;
+		}
+	}
+
+	/* Power save for MAC */
+	if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS  &&
+		!rtlhal->driver_going2unload) {
+		/* enable LED function */
+		rtl_write_byte(rtlpriv, 0x03, 0xF9);
+	/* SW/HW radio off or halt adapter!! For example S3/S4 */
+	} else {
+		/* LED function disable. Power range is about 8mA now. */
+		/* if write 0xF1 disconnet_pci power
+		 *	 ifconfig wlan0 down power are both high 35:70 */
+		/* if write oxF9 disconnet_pci power
+		 * ifconfig wlan0 down power are both low  12:45*/
+		rtl_write_byte(rtlpriv, 0x03, 0xF9);
+	}
+
+	rtl_write_byte(rtlpriv, SYS_CLKR + 1, 0x70);
+	rtl_write_byte(rtlpriv, AFE_PLL_CTRL + 1, 0x68);
+	rtl_write_byte(rtlpriv,  AFE_PLL_CTRL, 0x00);
+	rtl_write_byte(rtlpriv, LDOA15_CTRL, 0x34);
+	rtl_write_byte(rtlpriv, AFE_XTAL_CTRL, 0x0E);
+	RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+
+}
+
+static void _rtl92se_gen_refreshledstate(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	struct rtl_led *pLed0 = &(pcipriv->ledctl.sw_led0);
+
+	if (rtlpci->up_first_time == 1)
+		return;
+
+	if (rtlpriv->psc.rfoff_reason == RF_CHANGE_BY_IPS)
+		rtl92se_sw_led_on(hw, pLed0);
+	else
+		rtl92se_sw_led_off(hw, pLed0);
+}
+
+
+static void _rtl92se_power_domain_init(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u16 tmpu2b;
+	u8 tmpu1b;
+
+	rtlpriv->psc.pwrdomain_protect = true;
+
+	tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
+	if (tmpu1b & BIT(7)) {
+		tmpu1b &= ~(BIT(6) | BIT(7));
+		if (!_rtl92s_set_sysclk(hw, tmpu1b)) {
+			rtlpriv->psc.pwrdomain_protect = false;
+			return;
+		}
+	}
+
+	rtl_write_byte(rtlpriv, AFE_PLL_CTRL, 0x0);
+	rtl_write_byte(rtlpriv, LDOA15_CTRL, 0x34);
+
+	/* Reset MAC-IO and CPU and Core Digital BIT10/11/15 */
+	tmpu1b = rtl_read_byte(rtlpriv, SYS_FUNC_EN + 1);
+
+	/* If IPS we need to turn LED on. So we not
+	 * not disable BIT 3/7 of reg3. */
+	if (rtlpriv->psc.rfoff_reason & (RF_CHANGE_BY_IPS | RF_CHANGE_BY_HW))
+		tmpu1b &= 0xFB;
+	else
+		tmpu1b &= 0x73;
+
+	rtl_write_byte(rtlpriv, SYS_FUNC_EN + 1, tmpu1b);
+	/* wait for BIT 10/11/15 to pull high automatically!! */
+	mdelay(1);
+
+	rtl_write_byte(rtlpriv, CMDR, 0);
+	rtl_write_byte(rtlpriv, TCR, 0);
+
+	/* Data sheet not define 0x562!!! Copy from WMAC!!!!! */
+	tmpu1b = rtl_read_byte(rtlpriv, 0x562);
+	tmpu1b |= 0x08;
+	rtl_write_byte(rtlpriv, 0x562, tmpu1b);
+	tmpu1b &= ~(BIT(3));
+	rtl_write_byte(rtlpriv, 0x562, tmpu1b);
+
+	/* Enable AFE clock source */
+	tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL);
+	rtl_write_byte(rtlpriv, AFE_XTAL_CTRL, (tmpu1b | 0x01));
+	/* Delay 1.5ms */
+	udelay(1500);
+	tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL + 1);
+	rtl_write_byte(rtlpriv, AFE_XTAL_CTRL + 1, (tmpu1b & 0xfb));
+
+	/* Enable AFE Macro Block's Bandgap */
+	tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC);
+	rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | BIT(0)));
+	mdelay(1);
+
+	/* Enable AFE Mbias */
+	tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC);
+	rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | 0x02));
+	mdelay(1);
+
+	/* Enable LDOA15 block */
+	tmpu1b = rtl_read_byte(rtlpriv, LDOA15_CTRL);
+	rtl_write_byte(rtlpriv, LDOA15_CTRL, (tmpu1b | BIT(0)));
+
+	/* Set Digital Vdd to Retention isolation Path. */
+	tmpu2b = rtl_read_word(rtlpriv, SYS_ISO_CTRL);
+	rtl_write_word(rtlpriv, SYS_ISO_CTRL, (tmpu2b | BIT(11)));
+
+
+	/* For warm reboot NIC disappera bug. */
+	tmpu2b = rtl_read_word(rtlpriv, SYS_FUNC_EN);
+	rtl_write_word(rtlpriv, SYS_FUNC_EN, (tmpu2b | BIT(13)));
+
+	rtl_write_byte(rtlpriv, SYS_ISO_CTRL + 1, 0x68);
+
+	/* Enable AFE PLL Macro Block */
+	tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL);
+	rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) | BIT(4)));
+	/* Enable MAC 80MHZ clock */
+	tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL + 1);
+	rtl_write_byte(rtlpriv, AFE_PLL_CTRL + 1, (tmpu1b | BIT(0)));
+	mdelay(1);
+
+	/* Release isolation AFE PLL & MD */
+	rtl_write_byte(rtlpriv, SYS_ISO_CTRL, 0xA6);
+
+	/* Enable MAC clock */
+	tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR);
+	rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b | BIT(12) | BIT(11)));
+
+	/* Enable Core digital and enable IOREG R/W */
+	tmpu2b = rtl_read_word(rtlpriv, SYS_FUNC_EN);
+	rtl_write_word(rtlpriv, SYS_FUNC_EN, (tmpu2b | BIT(11)));
+	/* enable REG_EN */
+	rtl_write_word(rtlpriv, SYS_FUNC_EN, (tmpu2b | BIT(11) | BIT(15)));
+
+	/* Switch the control path. */
+	tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR);
+	rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b & (~BIT(2))));
+
+	tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
+	tmpu1b = ((tmpu1b | BIT(7)) & (~BIT(6)));
+	if (!_rtl92s_set_sysclk(hw, tmpu1b)) {
+		rtlpriv->psc.pwrdomain_protect = false;
+		return;
+	}
+
+	rtl_write_word(rtlpriv, CMDR, 0x37FC);
+
+	/* After MACIO reset,we must refresh LED state. */
+	_rtl92se_gen_refreshledstate(hw);
+
+	rtlpriv->psc.pwrdomain_protect = false;
+}
+
+void rtl92se_card_disable(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	enum nl80211_iftype opmode;
+	u8 wait = 30;
+
+	rtlpriv->intf_ops->enable_aspm(hw);
+
+	if (rtlpci->driver_is_goingto_unload ||
+		ppsc->rfoff_reason > RF_CHANGE_BY_PS)
+		rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_OFF);
+
+	/* we should chnge GPIO to input mode
+	 * this will drop away current about 25mA*/
+	rtl8192se_gpiobit3_cfg_inputmode(hw);
+
+	/* this is very important for ips power save */
+	while (wait-- >= 10 && rtlpriv->psc.pwrdomain_protect) {
+		if (rtlpriv->psc.pwrdomain_protect)
+			mdelay(20);
+		else
+			break;
+	}
+
+	mac->link_state = MAC80211_NOLINK;
+	opmode = NL80211_IFTYPE_UNSPECIFIED;
+	_rtl92se_set_media_status(hw, opmode);
+
+	_rtl92s_phy_set_rfhalt(hw);
+	udelay(100);
+}
+
+void rtl92se_interrupt_recognized(struct ieee80211_hw *hw, u32 *p_inta,
+			     u32 *p_intb)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	*p_inta = rtl_read_dword(rtlpriv, ISR) & rtlpci->irq_mask[0];
+	rtl_write_dword(rtlpriv, ISR, *p_inta);
+
+	*p_intb = rtl_read_dword(rtlpriv, ISR + 4) & rtlpci->irq_mask[1];
+	rtl_write_dword(rtlpriv, ISR + 4, *p_intb);
+}
+
+void rtl92se_set_beacon_related_registers(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	u16 bcntime_cfg = 0;
+	u16 bcn_cw = 6, bcn_ifs = 0xf;
+	u16 atim_window = 2;
+
+	/* ATIM Window (in unit of TU). */
+	rtl_write_word(rtlpriv, ATIMWND, atim_window);
+
+	/* Beacon interval (in unit of TU). */
+	rtl_write_word(rtlpriv, BCN_INTERVAL, mac->beacon_interval);
+
+	/* DrvErlyInt (in unit of TU). (Time to send
+	 * interrupt to notify driver to change
+	 * beacon content) */
+	rtl_write_word(rtlpriv, BCN_DRV_EARLY_INT, 10 << 4);
+
+	/* BcnDMATIM(in unit of us). Indicates the
+	 * time before TBTT to perform beacon queue DMA  */
+	rtl_write_word(rtlpriv, BCN_DMATIME, 256);
+
+	/* Force beacon frame transmission even
+	 * after receiving beacon frame from
+	 * other ad hoc STA */
+	rtl_write_byte(rtlpriv, BCN_ERR_THRESH, 100);
+
+	/* Beacon Time Configuration */
+	if (mac->opmode == NL80211_IFTYPE_ADHOC)
+		bcntime_cfg |= (bcn_cw << BCN_TCFG_CW_SHIFT);
+
+	/* TODO: bcn_ifs may required to be changed on ASIC */
+	bcntime_cfg |= bcn_ifs << BCN_TCFG_IFS;
+
+	/*for beacon changed */
+	rtl92s_phy_set_beacon_hwreg(hw, mac->beacon_interval);
+}
+
+void rtl92se_set_beacon_interval(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	u16 bcn_interval = mac->beacon_interval;
+
+	/* Beacon interval (in unit of TU). */
+	rtl_write_word(rtlpriv, BCN_INTERVAL, bcn_interval);
+	/* 2008.10.24 added by tynli for beacon changed. */
+	rtl92s_phy_set_beacon_hwreg(hw, bcn_interval);
+}
+
+void rtl92se_update_interrupt_mask(struct ieee80211_hw *hw,
+		u32 add_msr, u32 rm_msr)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD,
+		 ("add_msr:%x, rm_msr:%x\n", add_msr, rm_msr));
+
+	if (add_msr)
+		rtlpci->irq_mask[0] |= add_msr;
+
+	if (rm_msr)
+		rtlpci->irq_mask[0] &= (~rm_msr);
+
+	rtl92se_disable_interrupt(hw);
+	rtl92se_enable_interrupt(hw);
+}
+
+static void _rtl8192se_get_IC_Inferiority(struct ieee80211_hw *hw)
+{
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	u8 efuse_id;
+
+	rtlhal->ic_class = IC_INFERIORITY_A;
+
+	/* Only retrieving while using EFUSE. */
+	if ((rtlefuse->epromtype == EEPROM_BOOT_EFUSE) &&
+		!rtlefuse->autoload_failflag) {
+		efuse_id = efuse_read_1byte(hw, EFUSE_IC_ID_OFFSET);
+
+		if (efuse_id == 0xfe)
+			rtlhal->ic_class = IC_INFERIORITY_B;
+	}
+}
+
+static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u16 i, usvalue;
+	u16	eeprom_id;
+	u8 tempval;
+	u8 hwinfo[HWSET_MAX_SIZE_92S];
+	u8 rf_path, index;
+
+	if (rtlefuse->epromtype == EEPROM_93C46) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("RTL819X Not boot from eeprom, check it !!"));
+	} else if (rtlefuse->epromtype == EEPROM_BOOT_EFUSE) {
+		rtl_efuse_shadow_map_update(hw);
+
+		memcpy((void *)hwinfo, (void *)
+			&rtlefuse->efuse_map[EFUSE_INIT_MAP][0],
+			HWSET_MAX_SIZE_92S);
+	}
+
+	RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_DMESG, ("MAP\n"),
+		      hwinfo, HWSET_MAX_SIZE_92S);
+
+	eeprom_id = *((u16 *)&hwinfo[0]);
+	if (eeprom_id != RTL8190_EEPROM_ID) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 ("EEPROM ID(%#x) is invalid!!\n", eeprom_id));
+		rtlefuse->autoload_failflag = true;
+	} else {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Autoload OK\n"));
+		rtlefuse->autoload_failflag = false;
+	}
+
+	if (rtlefuse->autoload_failflag == true)
+		return;
+
+	_rtl8192se_get_IC_Inferiority(hw);
+
+	/* Read IC Version && Channel Plan */
+	/* VID, DID	 SE	0xA-D */
+	rtlefuse->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID];
+	rtlefuse->eeprom_did = *(u16 *)&hwinfo[EEPROM_DID];
+	rtlefuse->eeprom_svid = *(u16 *)&hwinfo[EEPROM_SVID];
+	rtlefuse->eeprom_smid = *(u16 *)&hwinfo[EEPROM_SMID];
+	rtlefuse->eeprom_version = *(u16 *)&hwinfo[EEPROM_VERSION];
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+			("EEPROMId = 0x%4x\n", eeprom_id));
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+			("EEPROM VID = 0x%4x\n", rtlefuse->eeprom_vid));
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+			("EEPROM DID = 0x%4x\n", rtlefuse->eeprom_did));
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+			("EEPROM SVID = 0x%4x\n", rtlefuse->eeprom_svid));
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+			("EEPROM SMID = 0x%4x\n", rtlefuse->eeprom_smid));
+
+	for (i = 0; i < 6; i += 2) {
+		usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR + i];
+		*((u16 *) (&rtlefuse->dev_addr[i])) = usvalue;
+	}
+
+	for (i = 0; i < 6; i++)
+		rtl_write_byte(rtlpriv, MACIDR0 + i, rtlefuse->dev_addr[i]);
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
+		 (MAC_FMT "\n", MAC_ARG(rtlefuse->dev_addr)));
+
+	/* Get Tx Power Level by Channel */
+	/* Read Tx power of Channel 1 ~ 14 from EEPROM. */
+	/* 92S suupport RF A & B */
+	for (rf_path = 0; rf_path < 2; rf_path++) {
+		for (i = 0; i < 3; i++) {
+			/* Read CCK RF A & B Tx power  */
+			rtlefuse->eeprom_chnlarea_txpwr_cck[rf_path][i] =
+			hwinfo[EEPROM_TXPOWERBASE + rf_path * 3 + i];
+
+			/* Read OFDM RF A & B Tx power for 1T */
+			rtlefuse->eeprom_chnlarea_txpwr_ht40_1s[rf_path][i] =
+			hwinfo[EEPROM_TXPOWERBASE + 6 + rf_path * 3 + i];
+
+			/* Read OFDM RF A & B Tx power for 2T */
+			rtlefuse->eeprom_chnlarea_txpwr_ht40_2sdiif[rf_path][i]
+				 = hwinfo[EEPROM_TXPOWERBASE + 12 +
+				   rf_path * 3 + i];
+		}
+	}
+
+	for (rf_path = 0; rf_path < 2; rf_path++)
+		for (i = 0; i < 3; i++)
+			RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
+				("RF(%d) EEPROM CCK Area(%d) = 0x%x\n", rf_path,
+				i, rtlefuse->eeprom_chnlarea_txpwr_cck
+					[rf_path][i]));
+	for (rf_path = 0; rf_path < 2; rf_path++)
+		for (i = 0; i < 3; i++)
+			RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
+				("RF(%d) EEPROM HT40 1S Area(%d) = 0x%x\n",
+				 rf_path, i,
+				 rtlefuse->eeprom_chnlarea_txpwr_ht40_1s
+						[rf_path][i]));
+	for (rf_path = 0; rf_path < 2; rf_path++)
+		for (i = 0; i < 3; i++)
+			RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
+				("RF(%d) EEPROM HT40 2S Diff Area(%d) = 0x%x\n",
+				 rf_path, i,
+				 rtlefuse->eeprom_chnlarea_txpwr_ht40_2sdiif
+					[rf_path][i]));
+
+	for (rf_path = 0; rf_path < 2; rf_path++) {
+
+		/* Assign dedicated channel tx power */
+		for (i = 0; i < 14; i++)	{
+			/* channel 1~3 use the same Tx Power Level. */
+			if (i < 3)
+				index = 0;
+			/* Channel 4-8 */
+			else if (i < 8)
+				index = 1;
+			/* Channel 9-14 */
+			else
+				index = 2;
+
+			/* Record A & B CCK /OFDM - 1T/2T Channel area
+			 * tx power */
+			rtlefuse->txpwrlevel_cck[rf_path][i]  =
+				rtlefuse->eeprom_chnlarea_txpwr_cck
+							[rf_path][index];
+			rtlefuse->txpwrlevel_ht40_1s[rf_path][i]  =
+				rtlefuse->eeprom_chnlarea_txpwr_ht40_1s
+							[rf_path][index];
+			rtlefuse->txpwrlevel_ht40_2s[rf_path][i]  =
+				rtlefuse->eeprom_chnlarea_txpwr_ht40_2sdiif
+							[rf_path][index];
+		}
+
+		for (i = 0; i < 14; i++) {
+			RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+				("RF(%d)-Ch(%d) [CCK / HT40_1S / HT40_2S] = "
+				 "[0x%x / 0x%x / 0x%x]\n", rf_path, i,
+				 rtlefuse->txpwrlevel_cck[rf_path][i],
+				 rtlefuse->txpwrlevel_ht40_1s[rf_path][i],
+				 rtlefuse->txpwrlevel_ht40_2s[rf_path][i]));
+		}
+	}
+
+	for (rf_path = 0; rf_path < 2; rf_path++) {
+		for (i = 0; i < 3; i++) {
+			/* Read Power diff limit. */
+			rtlefuse->eeprom_pwrgroup[rf_path][i] =
+				hwinfo[EEPROM_TXPWRGROUP + rf_path * 3 + i];
+		}
+	}
+
+	for (rf_path = 0; rf_path < 2; rf_path++) {
+		/* Fill Pwr group */
+		for (i = 0; i < 14; i++) {
+			/* Chanel 1-3 */
+			if (i < 3)
+				index = 0;
+			/* Channel 4-8 */
+			else if (i < 8)
+				index = 1;
+			/* Channel 9-13 */
+			else
+				index = 2;
+
+			rtlefuse->pwrgroup_ht20[rf_path][i] =
+				(rtlefuse->eeprom_pwrgroup[rf_path][index] &
+				0xf);
+			rtlefuse->pwrgroup_ht40[rf_path][i] =
+				((rtlefuse->eeprom_pwrgroup[rf_path][index] &
+				0xf0) >> 4);
+
+			RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+				("RF-%d pwrgroup_ht20[%d] = 0x%x\n",
+				 rf_path, i,
+				 rtlefuse->pwrgroup_ht20[rf_path][i]));
+			RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+				("RF-%d pwrgroup_ht40[%d] = 0x%x\n",
+				 rf_path, i,
+				 rtlefuse->pwrgroup_ht40[rf_path][i]));
+			}
+	}
+
+	for (i = 0; i < 14; i++) {
+		/* Read tx power difference between HT OFDM 20/40 MHZ */
+		/* channel 1-3 */
+		if (i < 3)
+			index = 0;
+		/* Channel 4-8 */
+		else if (i < 8)
+			index = 1;
+		/* Channel 9-14 */
+		else
+			index = 2;
+
+		tempval = (*(u8 *)&hwinfo[EEPROM_TX_PWR_HT20_DIFF +
+			   index]) & 0xff;
+		rtlefuse->txpwr_ht20diff[RF90_PATH_A][i] = (tempval & 0xF);
+		rtlefuse->txpwr_ht20diff[RF90_PATH_B][i] =
+						 ((tempval >> 4) & 0xF);
+
+		/* Read OFDM<->HT tx power diff */
+		/* Channel 1-3 */
+		if (i < 3)
+			index = 0;
+		/* Channel 4-8 */
+		else if (i < 8)
+			index = 0x11;
+		/* Channel 9-14 */
+		else
+			index = 1;
+
+		tempval = (*(u8 *)&hwinfo[EEPROM_TX_PWR_OFDM_DIFF + index])
+				  & 0xff;
+		rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i] =
+				 (tempval & 0xF);
+		rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i] =
+				 ((tempval >> 4) & 0xF);
+
+		tempval = (*(u8 *)&hwinfo[TX_PWR_SAFETY_CHK]);
+		rtlefuse->txpwr_safetyflag = (tempval & 0x01);
+	}
+
+	rtlefuse->eeprom_regulatory = 0;
+	if (rtlefuse->eeprom_version >= 2) {
+		/* BIT(0)~2 */
+		if (rtlefuse->eeprom_version >= 4)
+			rtlefuse->eeprom_regulatory =
+				 (hwinfo[EEPROM_REGULATORY] & 0x7);
+		else /* BIT(0) */
+			rtlefuse->eeprom_regulatory =
+				 (hwinfo[EEPROM_REGULATORY] & 0x1);
+	}
+	RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+		("eeprom_regulatory = 0x%x\n", rtlefuse->eeprom_regulatory));
+
+	for (i = 0; i < 14; i++)
+		RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+			("RF-A Ht20 to HT40 Diff[%d] = 0x%x\n", i,
+			 rtlefuse->txpwr_ht20diff[RF90_PATH_A][i]));
+	for (i = 0; i < 14; i++)
+		RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+			("RF-A Legacy to Ht40 Diff[%d] = 0x%x\n", i,
+			 rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i]));
+	for (i = 0; i < 14; i++)
+		RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+			("RF-B Ht20 to HT40 Diff[%d] = 0x%x\n", i,
+			 rtlefuse->txpwr_ht20diff[RF90_PATH_B][i]));
+	for (i = 0; i < 14; i++)
+		RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+			("RF-B Legacy to HT40 Diff[%d] = 0x%x\n", i,
+			 rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i]));
+
+	RTPRINT(rtlpriv, FINIT, INIT_TxPower, ("TxPwrSafetyFlag = %d\n",
+		rtlefuse->txpwr_safetyflag));
+
+	/* Read RF-indication and Tx Power gain
+	 * index diff of legacy to HT OFDM rate. */
+	tempval = (*(u8 *)&hwinfo[EEPROM_RFIND_POWERDIFF]) & 0xff;
+	rtlefuse->eeprom_txpowerdiff = tempval;
+	rtlefuse->legacy_httxpowerdiff =
+		rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][0];
+
+	RTPRINT(rtlpriv, FINIT, INIT_TxPower, ("TxPowerDiff = %#x\n",
+		rtlefuse->eeprom_txpowerdiff));
+
+	/* Get TSSI value for each path. */
+	usvalue = *(u16 *)&hwinfo[EEPROM_TSSI_A];
+	rtlefuse->eeprom_tssi[RF90_PATH_A] = (u8)((usvalue & 0xff00) >> 8);
+	usvalue = *(u8 *)&hwinfo[EEPROM_TSSI_B];
+	rtlefuse->eeprom_tssi[RF90_PATH_B] = (u8)(usvalue & 0xff);
+
+	RTPRINT(rtlpriv, FINIT, INIT_TxPower, ("TSSI_A = 0x%x, TSSI_B = 0x%x\n",
+		 rtlefuse->eeprom_tssi[RF90_PATH_A],
+		 rtlefuse->eeprom_tssi[RF90_PATH_B]));
+
+	/* Read antenna tx power offset of B/C/D to A  from EEPROM */
+	/* and read ThermalMeter from EEPROM */
+	tempval = *(u8 *)&hwinfo[EEPROM_THERMALMETER];
+	rtlefuse->eeprom_thermalmeter = tempval;
+	RTPRINT(rtlpriv, FINIT, INIT_TxPower, ("thermalmeter = 0x%x\n",
+		rtlefuse->eeprom_thermalmeter));
+
+	/* ThermalMeter, BIT(0)~3 for RFIC1, BIT(4)~7 for RFIC2 */
+	rtlefuse->thermalmeter[0] = (rtlefuse->eeprom_thermalmeter & 0x1f);
+	rtlefuse->tssi_13dbm = rtlefuse->eeprom_thermalmeter * 100;
+
+	/* Read CrystalCap from EEPROM */
+	tempval = (*(u8 *)&hwinfo[EEPROM_CRYSTALCAP]) >> 4;
+	rtlefuse->eeprom_crystalcap = tempval;
+	/* CrystalCap, BIT(12)~15 */
+	rtlefuse->crystalcap = rtlefuse->eeprom_crystalcap;
+
+	/* Read IC Version && Channel Plan */
+	/* Version ID, Channel plan */
+	rtlefuse->eeprom_channelplan = *(u8 *)&hwinfo[EEPROM_CHANNELPLAN];
+	rtlefuse->txpwr_fromeprom = true;
+	RTPRINT(rtlpriv, FINIT, INIT_TxPower, ("EEPROM ChannelPlan = 0x%4x\n",
+		rtlefuse->eeprom_channelplan));
+
+	/* Read Customer ID or Board Type!!! */
+	tempval = *(u8 *)&hwinfo[EEPROM_BOARDTYPE];
+	/* Change RF type definition */
+	if (tempval == 0)
+		rtlphy->rf_type = RF_2T2R;
+	else if (tempval == 1)
+		rtlphy->rf_type = RF_1T2R;
+	else if (tempval == 2)
+		rtlphy->rf_type = RF_1T2R;
+	else if (tempval == 3)
+		rtlphy->rf_type = RF_1T1R;
+
+	/* 1T2R but 1SS (1x1 receive combining) */
+	rtlefuse->b1x1_recvcombine = false;
+	if (rtlphy->rf_type == RF_1T2R) {
+		tempval = rtl_read_byte(rtlpriv, 0x07);
+		if (!(tempval & BIT(0))) {
+			rtlefuse->b1x1_recvcombine = true;
+			RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+				("RF_TYPE=1T2R but only 1SS\n"));
+		}
+	}
+	rtlefuse->b1ss_support = rtlefuse->b1x1_recvcombine;
+	rtlefuse->eeprom_oemid = *(u8 *)&hwinfo[EEPROM_CUSTOMID];
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("EEPROM Customer ID: 0x%2x",
+			rtlefuse->eeprom_oemid));
+
+	/* set channel paln to world wide 13 */
+	rtlefuse->channel_plan = COUNTRY_CODE_WORLD_WIDE_13;
+}
+
+void rtl92se_read_eeprom_info(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 tmp_u1b = 0;
+
+	tmp_u1b = rtl_read_byte(rtlpriv, EPROM_CMD);
+
+	if (tmp_u1b & BIT(4)) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("Boot from EEPROM\n"));
+		rtlefuse->epromtype = EEPROM_93C46;
+	} else {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("Boot from EFUSE\n"));
+		rtlefuse->epromtype = EEPROM_BOOT_EFUSE;
+	}
+
+	if (tmp_u1b & BIT(5)) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Autoload OK\n"));
+		rtlefuse->autoload_failflag = false;
+		_rtl92se_read_adapter_info(hw);
+	} else {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("Autoload ERR!!\n"));
+		rtlefuse->autoload_failflag = true;
+	}
+}
+
+static void rtl92se_update_hal_rate_table(struct ieee80211_hw *hw,
+					  struct ieee80211_sta *sta)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	u32 ratr_value;
+	u8 ratr_index = 0;
+	u8 nmode = mac->ht_enable;
+	u8 mimo_ps = IEEE80211_SMPS_OFF;
+	u16 shortgi_rate = 0;
+	u32 tmp_ratr_value = 0;
+	u8 curtxbw_40mhz = mac->bw_40;
+	u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
+				1 : 0;
+	u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
+				1 : 0;
+	enum wireless_mode wirelessmode = mac->mode;
+
+	if (rtlhal->current_bandtype == BAND_ON_5G)
+		ratr_value = sta->supp_rates[1] << 4;
+	else
+		ratr_value = sta->supp_rates[0];
+	ratr_value |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
+			sta->ht_cap.mcs.rx_mask[0] << 12);
+	switch (wirelessmode) {
+	case WIRELESS_MODE_B:
+		ratr_value &= 0x0000000D;
+		break;
+	case WIRELESS_MODE_G:
+		ratr_value &= 0x00000FF5;
+		break;
+	case WIRELESS_MODE_N_24G:
+	case WIRELESS_MODE_N_5G:
+		nmode = 1;
+		if (mimo_ps == IEEE80211_SMPS_STATIC) {
+			ratr_value &= 0x0007F005;
+		} else {
+			u32 ratr_mask;
+
+			if (get_rf_type(rtlphy) == RF_1T2R ||
+			    get_rf_type(rtlphy) == RF_1T1R) {
+				if (curtxbw_40mhz)
+					ratr_mask = 0x000ff015;
+				else
+					ratr_mask = 0x000ff005;
+			} else {
+				if (curtxbw_40mhz)
+					ratr_mask = 0x0f0ff015;
+				else
+					ratr_mask = 0x0f0ff005;
+			}
+
+			ratr_value &= ratr_mask;
+		}
+		break;
+	default:
+		if (rtlphy->rf_type == RF_1T2R)
+			ratr_value &= 0x000ff0ff;
+		else
+			ratr_value &= 0x0f0ff0ff;
+
+		break;
+	}
+
+	if (rtlpriv->rtlhal.version >= VERSION_8192S_BCUT)
+		ratr_value &= 0x0FFFFFFF;
+	else if (rtlpriv->rtlhal.version == VERSION_8192S_ACUT)
+		ratr_value &= 0x0FFFFFF0;
+
+	if (nmode && ((curtxbw_40mhz &&
+			 curshortgi_40mhz) || (!curtxbw_40mhz &&
+						 curshortgi_20mhz))) {
+
+		ratr_value |= 0x10000000;
+		tmp_ratr_value = (ratr_value >> 12);
+
+		for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) {
+			if ((1 << shortgi_rate) & tmp_ratr_value)
+				break;
+		}
+
+		shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) |
+		    (shortgi_rate << 4) | (shortgi_rate);
+
+		rtl_write_byte(rtlpriv, SG_RATE, shortgi_rate);
+	}
+
+	rtl_write_dword(rtlpriv, ARFR0 + ratr_index * 4, ratr_value);
+	if (ratr_value & 0xfffff000)
+		rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_REFRESH_N);
+	else
+		rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_REFRESH_BG);
+
+	RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
+		 ("%x\n", rtl_read_dword(rtlpriv, ARFR0)));
+}
+
+static void rtl92se_update_hal_rate_mask(struct ieee80211_hw *hw,
+					 struct ieee80211_sta *sta,
+					 u8 rssi_level)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_sta_info *sta_entry = NULL;
+	u32 ratr_bitmap;
+	u8 ratr_index = 0;
+	u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)
+				? 1 : 0;
+	u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
+				1 : 0;
+	u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
+				1 : 0;
+	enum wireless_mode wirelessmode = 0;
+	bool shortgi = false;
+	u32 ratr_value = 0;
+	u8 shortgi_rate = 0;
+	u32 mask = 0;
+	u32 band = 0;
+	bool bmulticast = false;
+	u8 macid = 0;
+	u8 mimo_ps = IEEE80211_SMPS_OFF;
+
+	sta_entry = (struct rtl_sta_info *) sta->drv_priv;
+	wirelessmode = sta_entry->wireless_mode;
+	if (mac->opmode == NL80211_IFTYPE_STATION)
+		curtxbw_40mhz = mac->bw_40;
+	else if (mac->opmode == NL80211_IFTYPE_AP ||
+		mac->opmode == NL80211_IFTYPE_ADHOC)
+		macid = sta->aid + 1;
+
+	if (rtlhal->current_bandtype == BAND_ON_5G)
+		ratr_bitmap = sta->supp_rates[1] << 4;
+	else
+		ratr_bitmap = sta->supp_rates[0];
+	ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
+			sta->ht_cap.mcs.rx_mask[0] << 12);
+	switch (wirelessmode) {
+	case WIRELESS_MODE_B:
+		band |= WIRELESS_11B;
+		ratr_index = RATR_INX_WIRELESS_B;
+		if (ratr_bitmap & 0x0000000c)
+			ratr_bitmap &= 0x0000000d;
+		else
+			ratr_bitmap &= 0x0000000f;
+		break;
+	case WIRELESS_MODE_G:
+		band |= (WIRELESS_11G | WIRELESS_11B);
+		ratr_index = RATR_INX_WIRELESS_GB;
+
+		if (rssi_level == 1)
+			ratr_bitmap &= 0x00000f00;
+		else if (rssi_level == 2)
+			ratr_bitmap &= 0x00000ff0;
+		else
+			ratr_bitmap &= 0x00000ff5;
+		break;
+	case WIRELESS_MODE_A:
+		band |= WIRELESS_11A;
+		ratr_index = RATR_INX_WIRELESS_A;
+		ratr_bitmap &= 0x00000ff0;
+		break;
+	case WIRELESS_MODE_N_24G:
+	case WIRELESS_MODE_N_5G:
+		band |= (WIRELESS_11N | WIRELESS_11G | WIRELESS_11B);
+		ratr_index = RATR_INX_WIRELESS_NGB;
+
+		if (mimo_ps == IEEE80211_SMPS_STATIC) {
+			if (rssi_level == 1)
+				ratr_bitmap &= 0x00070000;
+			else if (rssi_level == 2)
+				ratr_bitmap &= 0x0007f000;
+			else
+				ratr_bitmap &= 0x0007f005;
+		} else {
+			if (rtlphy->rf_type == RF_1T2R ||
+				rtlphy->rf_type == RF_1T1R) {
+				if (rssi_level == 1) {
+						ratr_bitmap &= 0x000f0000;
+				} else if (rssi_level == 3) {
+					ratr_bitmap &= 0x000fc000;
+				} else if (rssi_level == 5) {
+						ratr_bitmap &= 0x000ff000;
+				} else {
+					if (curtxbw_40mhz)
+						ratr_bitmap &= 0x000ff015;
+					else
+						ratr_bitmap &= 0x000ff005;
+				}
+			} else {
+				if (rssi_level == 1) {
+					ratr_bitmap &= 0x0f8f0000;
+				} else if (rssi_level == 3) {
+					ratr_bitmap &= 0x0f8fc000;
+				} else if (rssi_level == 5) {
+					ratr_bitmap &= 0x0f8ff000;
+				} else {
+					if (curtxbw_40mhz)
+						ratr_bitmap &= 0x0f8ff015;
+					else
+						ratr_bitmap &= 0x0f8ff005;
+				}
+			}
+		}
+
+		if ((curtxbw_40mhz && curshortgi_40mhz) ||
+		    (!curtxbw_40mhz && curshortgi_20mhz)) {
+			if (macid == 0)
+				shortgi = true;
+			else if (macid == 1)
+				shortgi = false;
+		}
+		break;
+	default:
+		band |= (WIRELESS_11N | WIRELESS_11G | WIRELESS_11B);
+		ratr_index = RATR_INX_WIRELESS_NGB;
+
+		if (rtlphy->rf_type == RF_1T2R)
+			ratr_bitmap &= 0x000ff0ff;
+		else
+			ratr_bitmap &= 0x0f8ff0ff;
+		break;
+	}
+
+	if (rtlpriv->rtlhal.version >= VERSION_8192S_BCUT)
+		ratr_bitmap &= 0x0FFFFFFF;
+	else if (rtlpriv->rtlhal.version == VERSION_8192S_ACUT)
+		ratr_bitmap &= 0x0FFFFFF0;
+
+	if (shortgi) {
+		ratr_bitmap |= 0x10000000;
+		/* Get MAX MCS available. */
+		ratr_value = (ratr_bitmap >> 12);
+		for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) {
+			if ((1 << shortgi_rate) & ratr_value)
+				break;
+		}
+
+		shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) |
+			(shortgi_rate << 4) | (shortgi_rate);
+		rtl_write_byte(rtlpriv, SG_RATE, shortgi_rate);
+	}
+
+	mask |= (bmulticast ? 1 : 0) << 9 | (macid & 0x1f) << 4 | (band & 0xf);
+
+	RT_TRACE(rtlpriv, COMP_RATR, DBG_TRACE, ("mask = %x, bitmap = %x\n",
+			mask, ratr_bitmap));
+	rtl_write_dword(rtlpriv, 0x2c4, ratr_bitmap);
+	rtl_write_dword(rtlpriv, WFM5, (FW_RA_UPDATE_MASK | (mask << 8)));
+
+	if (macid != 0)
+		sta_entry->ratr_index = ratr_index;
+}
+
+void rtl92se_update_hal_rate_tbl(struct ieee80211_hw *hw,
+		struct ieee80211_sta *sta, u8 rssi_level)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	if (rtlpriv->dm.useramask)
+		rtl92se_update_hal_rate_mask(hw, sta, rssi_level);
+	else
+		rtl92se_update_hal_rate_table(hw, sta);
+}
+
+void rtl92se_update_channel_access_setting(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	u16 sifs_timer;
+
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME,
+				      (u8 *)&mac->slot_time);
+	sifs_timer = 0x0e0e;
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SIFS, (u8 *)&sifs_timer);
+
+}
+
+/* this ifunction is for RFKILL, it's different with windows,
+ * because UI will disable wireless when GPIO Radio Off.
+ * And here we not check or Disable/Enable ASPM like windows*/
+bool rtl92se_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	enum rf_pwrstate rfpwr_toset, cur_rfstate;
+	unsigned long flag = 0;
+	bool actuallyset = false;
+	bool turnonbypowerdomain = false;
+
+	/* just 8191se can check gpio before firstup, 92c/92d have fixed it */
+	if ((rtlpci->up_first_time == 1) || (rtlpci->being_init_adapter))
+		return false;
+
+	if (ppsc->swrf_processing)
+		return false;
+
+	spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+	if (ppsc->rfchange_inprogress) {
+		spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+		return false;
+	} else {
+		ppsc->rfchange_inprogress = true;
+		spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+	}
+
+	cur_rfstate = ppsc->rfpwr_state;
+
+	/* because after _rtl92s_phy_set_rfhalt, all power
+	 * closed, so we must open some power for GPIO check,
+	 * or we will always check GPIO RFOFF here,
+	 * And we should close power after GPIO check */
+	if (RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC)) {
+		_rtl92se_power_domain_init(hw);
+		turnonbypowerdomain = true;
+	}
+
+	rfpwr_toset = _rtl92se_rf_onoff_detect(hw);
+
+	if ((ppsc->hwradiooff == true) && (rfpwr_toset == ERFON)) {
+		RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+			 ("RFKILL-HW Radio ON, RF ON\n"));
+
+		rfpwr_toset = ERFON;
+		ppsc->hwradiooff = false;
+		actuallyset = true;
+	} else if ((ppsc->hwradiooff == false) && (rfpwr_toset == ERFOFF)) {
+		RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+			 ("RFKILL-HW Radio OFF, RF OFF\n"));
+
+		rfpwr_toset = ERFOFF;
+		ppsc->hwradiooff = true;
+		actuallyset = true;
+	}
+
+	if (actuallyset) {
+		spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+		ppsc->rfchange_inprogress = false;
+		spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+
+	/* this not include ifconfig wlan0 down case */
+	/* } else if (rfpwr_toset == ERFOFF || cur_rfstate == ERFOFF) { */
+	} else {
+		/* because power_domain_init may be happen when
+		 * _rtl92s_phy_set_rfhalt, this will open some powers
+		 * and cause current increasing about 40 mA for ips,
+		 * rfoff and ifconfig down, so we set
+		 * _rtl92s_phy_set_rfhalt again here */
+		if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC &&
+			turnonbypowerdomain) {
+			_rtl92s_phy_set_rfhalt(hw);
+			RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+		}
+
+		spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+		ppsc->rfchange_inprogress = false;
+		spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+	}
+
+	*valid = 1;
+	return !ppsc->hwradiooff;
+
+}
+
+/* Is_wepkey just used for WEP used as group & pairwise key
+ * if pairwise is AES ang group is WEP Is_wepkey == false.*/
+void rtl92se_set_key(struct ieee80211_hw *hw, u32 key_index, u8 *p_macaddr,
+	bool is_group, u8 enc_algo, bool is_wepkey, bool clear_all)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 *macaddr = p_macaddr;
+
+	u32 entry_id = 0;
+	bool is_pairwise = false;
+
+	static u8 cam_const_addr[4][6] = {
+		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+		{0x00, 0x00, 0x00, 0x00, 0x00, 0x01},
+		{0x00, 0x00, 0x00, 0x00, 0x00, 0x02},
+		{0x00, 0x00, 0x00, 0x00, 0x00, 0x03}
+	};
+	static u8 cam_const_broad[] = {
+		0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	};
+
+	if (clear_all) {
+		u8 idx = 0;
+		u8 cam_offset = 0;
+		u8 clear_number = 5;
+
+		RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, ("clear_all\n"));
+
+		for (idx = 0; idx < clear_number; idx++) {
+			rtl_cam_mark_invalid(hw, cam_offset + idx);
+			rtl_cam_empty_entry(hw, cam_offset + idx);
+
+			if (idx < 5) {
+				memset(rtlpriv->sec.key_buf[idx], 0,
+				       MAX_KEY_LEN);
+				rtlpriv->sec.key_len[idx] = 0;
+			}
+		}
+
+	} else {
+		switch (enc_algo) {
+		case WEP40_ENCRYPTION:
+			enc_algo = CAM_WEP40;
+			break;
+		case WEP104_ENCRYPTION:
+			enc_algo = CAM_WEP104;
+			break;
+		case TKIP_ENCRYPTION:
+			enc_algo = CAM_TKIP;
+			break;
+		case AESCCMP_ENCRYPTION:
+			enc_algo = CAM_AES;
+			break;
+		default:
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+					("switch case not process\n"));
+			enc_algo = CAM_TKIP;
+			break;
+		}
+
+		if (is_wepkey || rtlpriv->sec.use_defaultkey) {
+			macaddr = cam_const_addr[key_index];
+			entry_id = key_index;
+		} else {
+			if (is_group) {
+				macaddr = cam_const_broad;
+				entry_id = key_index;
+			} else {
+				if (mac->opmode == NL80211_IFTYPE_AP) {
+					entry_id = rtl_cam_get_free_entry(hw,
+								 p_macaddr);
+					if (entry_id >=  TOTAL_CAM_ENTRY) {
+						RT_TRACE(rtlpriv,
+						   COMP_SEC, DBG_EMERG,
+						   ("Can not find free hw"
+						   " security cam entry\n"));
+						return;
+					}
+				} else {
+					entry_id = CAM_PAIRWISE_KEY_POSITION;
+				}
+
+				key_index = PAIRWISE_KEYIDX;
+				is_pairwise = true;
+			}
+		}
+
+		if (rtlpriv->sec.key_len[key_index] == 0) {
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+				 ("delete one entry, entry_id is %d\n",
+				 entry_id));
+			if (mac->opmode == NL80211_IFTYPE_AP)
+				rtl_cam_del_entry(hw, p_macaddr);
+			rtl_cam_delete_one_entry(hw, p_macaddr, entry_id);
+		} else {
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+				 ("The insert KEY length is %d\n",
+				  rtlpriv->sec.key_len[PAIRWISE_KEYIDX]));
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+				 ("The insert KEY  is %x %x\n",
+				  rtlpriv->sec.key_buf[0][0],
+				  rtlpriv->sec.key_buf[0][1]));
+
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+				 ("add one entry\n"));
+			if (is_pairwise) {
+				RT_PRINT_DATA(rtlpriv, COMP_SEC, DBG_LOUD,
+				      "Pairwiase Key content :",
+				       rtlpriv->sec.pairwise_key,
+				       rtlpriv->sec.key_len[PAIRWISE_KEYIDX]);
+
+				RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+					 ("set Pairwiase key\n"));
+
+				rtl_cam_add_one_entry(hw, macaddr, key_index,
+					entry_id, enc_algo,
+					CAM_CONFIG_NO_USEDK,
+					rtlpriv->sec.key_buf[key_index]);
+			} else {
+				RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+					 ("set group key\n"));
+
+				if (mac->opmode == NL80211_IFTYPE_ADHOC) {
+					rtl_cam_add_one_entry(hw,
+						rtlefuse->dev_addr,
+						PAIRWISE_KEYIDX,
+						CAM_PAIRWISE_KEY_POSITION,
+						enc_algo, CAM_CONFIG_NO_USEDK,
+						rtlpriv->sec.key_buf[entry_id]);
+				}
+
+				rtl_cam_add_one_entry(hw, macaddr, key_index,
+					      entry_id, enc_algo,
+					      CAM_CONFIG_NO_USEDK,
+					      rtlpriv->sec.key_buf[entry_id]);
+			}
+
+		}
+	}
+}
+
+void rtl92se_suspend(struct ieee80211_hw *hw)
+{
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	rtlpci->up_first_time = true;
+}
+
+void rtl92se_resume(struct ieee80211_hw *hw)
+{
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	u32 val;
+
+	pci_read_config_dword(rtlpci->pdev, 0x40, &val);
+	if ((val & 0x0000ff00) != 0)
+		pci_write_config_dword(rtlpci->pdev, 0x40,
+			val & 0xffff00ff);
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.h b/drivers/net/wireless/rtlwifi/rtl8192se/hw.h
new file mode 100644
index 00000000000..6160a9bfe98
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.h
@@ -0,0 +1,79 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+#ifndef __REALTEK_PCI92SE_HW_H__
+#define __REALTEK_PCI92SE_HW_H__
+
+#define MSR_LINK_MANAGED   2
+#define MSR_LINK_NONE      0
+#define MSR_LINK_SHIFT     0
+#define MSR_LINK_ADHOC     1
+#define MSR_LINK_MASTER    3
+
+enum WIRELESS_NETWORK_TYPE {
+	WIRELESS_11B = 1,
+	WIRELESS_11G = 2,
+	WIRELESS_11A = 4,
+	WIRELESS_11N = 8
+};
+
+void rtl92se_get_hw_reg(struct ieee80211_hw *hw,
+			u8 variable, u8 *val);
+void rtl92se_read_eeprom_info(struct ieee80211_hw *hw);
+void rtl92se_interrupt_recognized(struct ieee80211_hw *hw,
+				  u32 *inta, u32 *intb);
+int rtl92se_hw_init(struct ieee80211_hw *hw);
+void rtl92se_card_disable(struct ieee80211_hw *hw);
+void rtl92se_enable_interrupt(struct ieee80211_hw *hw);
+void rtl92se_disable_interrupt(struct ieee80211_hw *hw);
+int rtl92se_set_network_type(struct ieee80211_hw *hw,
+			     enum nl80211_iftype type);
+void rtl92se_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid);
+void rtl92se_set_mac_addr(struct rtl_io *io, const u8 * addr);
+void rtl92se_set_qos(struct ieee80211_hw *hw, int aci);
+void rtl92se_set_beacon_related_registers(struct ieee80211_hw *hw);
+void rtl92se_set_beacon_interval(struct ieee80211_hw *hw);
+void rtl92se_update_interrupt_mask(struct ieee80211_hw *hw,
+				   u32 add_msr, u32 rm_msr);
+void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable,
+			u8 *val);
+void rtl92se_update_hal_rate_tbl(struct ieee80211_hw *hw,
+		struct ieee80211_sta *sta, u8 rssi_level);
+void rtl92se_update_channel_access_setting(struct ieee80211_hw *hw);
+bool rtl92se_gpio_radio_on_off_checking(struct ieee80211_hw *hw,
+					u8 *valid);
+void rtl8192se_gpiobit3_cfg_inputmode(struct ieee80211_hw *hw);
+void rtl92se_enable_hw_security_config(struct ieee80211_hw *hw);
+void rtl92se_set_key(struct ieee80211_hw *hw,
+		     u32 key_index, u8 *macaddr, bool is_group,
+		     u8 enc_algo, bool is_wepkey, bool clear_all);
+void rtl92se_suspend(struct ieee80211_hw *hw);
+void rtl92se_resume(struct ieee80211_hw *hw);
+
+#endif
+
-- 
cgit v1.2.3


From 293380046bf1a80872d611143a5ee6a23f662472 Mon Sep 17 00:00:00 2001
From: Chaoming Li <chaoming_li@realsil.com.cn>
Date: Tue, 3 May 2011 09:48:25 -0500
Subject: rtlwifi: rtl8192se: Merge led routines

Merge routines led.c and led.h for RTL8192SE.

Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8192se/led.c | 149 +++++++++++++++++++++++++++
 drivers/net/wireless/rtlwifi/rtl8192se/led.h |  37 +++++++
 2 files changed, 186 insertions(+)
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8192se/led.c
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8192se/led.h

diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/led.c b/drivers/net/wireless/rtlwifi/rtl8192se/led.c
new file mode 100644
index 00000000000..6d4f6661668
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/led.c
@@ -0,0 +1,149 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../pci.h"
+#include "reg.h"
+#include "led.h"
+
+static void _rtl92se_init_led(struct ieee80211_hw *hw,
+			      struct rtl_led *pled, enum rtl_led_pin ledpin)
+{
+	pled->hw = hw;
+	pled->ledpin = ledpin;
+	pled->ledon = false;
+}
+
+void rtl92se_init_sw_leds(struct ieee80211_hw *hw)
+{
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	_rtl92se_init_led(hw, &(pcipriv->ledctl.sw_led0), LED_PIN_LED0);
+	_rtl92se_init_led(hw, &(pcipriv->ledctl.sw_led1), LED_PIN_LED1);
+}
+
+void rtl92se_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
+{
+	u8 ledcfg;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD,
+		 ("LedAddr:%X ledpin=%d\n", LEDCFG, pled->ledpin));
+
+	ledcfg = rtl_read_byte(rtlpriv, LEDCFG);
+
+	switch (pled->ledpin) {
+	case LED_PIN_GPIO0:
+		break;
+	case LED_PIN_LED0:
+		rtl_write_byte(rtlpriv, LEDCFG, ledcfg & 0xf0);
+		break;
+	case LED_PIN_LED1:
+		rtl_write_byte(rtlpriv, LEDCFG, ledcfg & 0x0f);
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("switch case not process\n"));
+		break;
+	}
+	pled->ledon = true;
+}
+
+void rtl92se_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	u8 ledcfg;
+
+	RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD,
+		 ("LedAddr:%X ledpin=%d\n", LEDCFG, pled->ledpin));
+
+	ledcfg = rtl_read_byte(rtlpriv, LEDCFG);
+
+	switch (pled->ledpin) {
+	case LED_PIN_GPIO0:
+		break;
+	case LED_PIN_LED0:
+		ledcfg &= 0xf0;
+		if (pcipriv->ledctl.led_opendrain == true)
+			rtl_write_byte(rtlpriv, LEDCFG, (ledcfg | BIT(1)));
+		else
+			rtl_write_byte(rtlpriv, LEDCFG, (ledcfg | BIT(3)));
+		break;
+	case LED_PIN_LED1:
+		ledcfg &= 0x0f;
+		rtl_write_byte(rtlpriv, LEDCFG, (ledcfg | BIT(3)));
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("switch case not process\n"));
+		break;
+	}
+	pled->ledon = false;
+}
+
+static void _rtl92se_sw_led_control(struct ieee80211_hw *hw,
+				    enum led_ctl_mode ledaction)
+{
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	struct rtl_led *pLed0 = &(pcipriv->ledctl.sw_led0);
+	switch (ledaction) {
+	case LED_CTL_POWER_ON:
+	case LED_CTL_LINK:
+	case LED_CTL_NO_LINK:
+		rtl92se_sw_led_on(hw, pLed0);
+		break;
+	case LED_CTL_POWER_OFF:
+		rtl92se_sw_led_off(hw, pLed0);
+		break;
+	default:
+		break;
+	}
+}
+
+void rtl92se_led_control(struct ieee80211_hw *hw, enum led_ctl_mode ledaction)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+	if ((ppsc->rfoff_reason > RF_CHANGE_BY_PS) &&
+	    (ledaction == LED_CTL_TX ||
+	    ledaction == LED_CTL_RX ||
+	    ledaction == LED_CTL_SITE_SURVEY ||
+	    ledaction == LED_CTL_LINK ||
+	    ledaction == LED_CTL_NO_LINK ||
+	    ledaction == LED_CTL_START_TO_LINK ||
+	    ledaction == LED_CTL_POWER_ON)) {
+		return;
+	}
+	RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD, ("ledaction %d,\n",
+		 ledaction));
+
+	_rtl92se_sw_led_control(hw, ledaction);
+}
+
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/led.h b/drivers/net/wireless/rtlwifi/rtl8192se/led.h
new file mode 100644
index 00000000000..8cce3870af3
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/led.h
@@ -0,0 +1,37 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+#ifndef __REALTEK_PCI92SE_LED_H__
+#define __REALTEK_PCI92SE_LED_H__
+
+void rtl92se_init_sw_leds(struct ieee80211_hw *hw);
+void rtl92se_sw_led_on(struct ieee80211_hw *hw,	struct rtl_led *pled);
+void rtl92se_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled);
+void rtl92se_led_control(struct ieee80211_hw *hw, enum led_ctl_mode ledaction);
+
+#endif
-- 
cgit v1.2.3


From d15853163bea3d31c3b2cc9c74d018a861c128cf Mon Sep 17 00:00:00 2001
From: Chaoming Li <chaoming_li@realsil.com.cn>
Date: Tue, 3 May 2011 09:48:35 -0500
Subject: rtlwifi: rtl8192se: Merge phy routines

Merge routines phy.c and phy.h for RTL8192SE.

Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8192se/phy.c | 1740 ++++++++++++++++++++++++++
 drivers/net/wireless/rtlwifi/rtl8192se/phy.h |  101 ++
 2 files changed, 1841 insertions(+)
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8192se/phy.c
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8192se/phy.h

diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
new file mode 100644
index 00000000000..63b45e60a95
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
@@ -0,0 +1,1740 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../pci.h"
+#include "../ps.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "rf.h"
+#include "dm.h"
+#include "fw.h"
+#include "hw.h"
+#include "table.h"
+
+static u32 _rtl92s_phy_calculate_bit_shift(u32 bitmask)
+{
+	u32 i;
+
+	for (i = 0; i <= 31; i++) {
+		if (((bitmask >> i) & 0x1) == 1)
+			break;
+	}
+
+	return i;
+}
+
+u32 rtl92s_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 returnvalue = 0, originalvalue, bitshift;
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x)\n",
+			regaddr, bitmask));
+
+	originalvalue = rtl_read_dword(rtlpriv, regaddr);
+	bitshift = _rtl92s_phy_calculate_bit_shift(bitmask);
+	returnvalue = (originalvalue & bitmask) >> bitshift;
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
+		 ("BBR MASK=0x%x Addr[0x%x]=0x%x\n",
+		 bitmask, regaddr, originalvalue));
+
+	return returnvalue;
+
+}
+
+void rtl92s_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask,
+			   u32 data)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 originalvalue, bitshift;
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x),"
+			" data(%#x)\n", regaddr, bitmask, data));
+
+	if (bitmask != MASKDWORD) {
+		originalvalue = rtl_read_dword(rtlpriv, regaddr);
+		bitshift = _rtl92s_phy_calculate_bit_shift(bitmask);
+		data = ((originalvalue & (~bitmask)) | (data << bitshift));
+	}
+
+	rtl_write_dword(rtlpriv, regaddr, data);
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x),"
+			" data(%#x)\n",	regaddr, bitmask, data));
+
+}
+
+static u32 _rtl92s_phy_rf_serial_read(struct ieee80211_hw *hw,
+				      enum radio_path rfpath, u32 offset)
+{
+
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
+	u32 newoffset;
+	u32 tmplong, tmplong2;
+	u8 rfpi_enable = 0;
+	u32 retvalue = 0;
+
+	offset &= 0x3f;
+	newoffset = offset;
+
+	tmplong = rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD);
+
+	if (rfpath == RF90_PATH_A)
+		tmplong2 = tmplong;
+	else
+		tmplong2 = rtl_get_bbreg(hw, pphyreg->rfhssi_para2, MASKDWORD);
+
+	tmplong2 = (tmplong2 & (~BLSSI_READADDRESS)) | (newoffset << 23) |
+			BLSSI_READEDGE;
+
+	rtl_set_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD,
+		      tmplong & (~BLSSI_READEDGE));
+
+	mdelay(1);
+
+	rtl_set_bbreg(hw, pphyreg->rfhssi_para2, MASKDWORD, tmplong2);
+	mdelay(1);
+
+	rtl_set_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD, tmplong |
+		      BLSSI_READEDGE);
+	mdelay(1);
+
+	if (rfpath == RF90_PATH_A)
+		rfpi_enable = (u8)rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER1,
+						BIT(8));
+	else if (rfpath == RF90_PATH_B)
+		rfpi_enable = (u8)rtl_get_bbreg(hw, RFPGA0_XB_HSSIPARAMETER1,
+						BIT(8));
+
+	if (rfpi_enable)
+		retvalue = rtl_get_bbreg(hw, pphyreg->rflssi_readbackpi,
+					 BLSSI_READBACK_DATA);
+	else
+		retvalue = rtl_get_bbreg(hw, pphyreg->rflssi_readback,
+					 BLSSI_READBACK_DATA);
+
+	retvalue = rtl_get_bbreg(hw, pphyreg->rflssi_readback,
+				 BLSSI_READBACK_DATA);
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("RFR-%d Addr[0x%x]=0x%x\n",
+		 rfpath, pphyreg->rflssi_readback, retvalue));
+
+	return retvalue;
+
+}
+
+static void _rtl92s_phy_rf_serial_write(struct ieee80211_hw *hw,
+					enum radio_path rfpath, u32 offset,
+					u32 data)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
+	u32 data_and_addr = 0;
+	u32 newoffset;
+
+	offset &= 0x3f;
+	newoffset = offset;
+
+	data_and_addr = ((newoffset << 20) | (data & 0x000fffff)) & 0x0fffffff;
+	rtl_set_bbreg(hw, pphyreg->rf3wire_offset, MASKDWORD, data_and_addr);
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("RFW-%d Addr[0x%x]=0x%x\n",
+		 rfpath, pphyreg->rf3wire_offset, data_and_addr));
+}
+
+
+u32 rtl92s_phy_query_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
+			    u32 regaddr, u32 bitmask)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 original_value, readback_value, bitshift;
+	unsigned long flags;
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), rfpath(%#x), "
+		 "bitmask(%#x)\n", regaddr, rfpath, bitmask));
+
+	spin_lock_irqsave(&rtlpriv->locks.rf_lock, flags);
+
+	original_value = _rtl92s_phy_rf_serial_read(hw, rfpath, regaddr);
+
+	bitshift = _rtl92s_phy_calculate_bit_shift(bitmask);
+	readback_value = (original_value & bitmask) >> bitshift;
+
+	spin_unlock_irqrestore(&rtlpriv->locks.rf_lock, flags);
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), rfpath(%#x), "
+		 "bitmask(%#x), original_value(%#x)\n", regaddr, rfpath,
+		 bitmask, original_value));
+
+	return readback_value;
+}
+
+void rtl92s_phy_set_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
+			   u32 regaddr, u32 bitmask, u32 data)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u32 original_value, bitshift;
+	unsigned long flags;
+
+	if (!((rtlphy->rf_pathmap >> rfpath) & 0x1))
+		return;
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x),"
+		 " data(%#x), rfpath(%#x)\n", regaddr, bitmask, data, rfpath));
+
+	spin_lock_irqsave(&rtlpriv->locks.rf_lock, flags);
+
+	if (bitmask != RFREG_OFFSET_MASK) {
+		original_value = _rtl92s_phy_rf_serial_read(hw, rfpath,
+							    regaddr);
+		bitshift = _rtl92s_phy_calculate_bit_shift(bitmask);
+		data = ((original_value & (~bitmask)) | (data << bitshift));
+	}
+
+	_rtl92s_phy_rf_serial_write(hw, rfpath, regaddr, data);
+
+	spin_unlock_irqrestore(&rtlpriv->locks.rf_lock, flags);
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x), "
+		 "data(%#x), rfpath(%#x)\n", regaddr, bitmask, data, rfpath));
+
+}
+
+void rtl92s_phy_scan_operation_backup(struct ieee80211_hw *hw,
+				      u8 operation)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+	if (!is_hal_stop(rtlhal)) {
+		switch (operation) {
+		case SCAN_OPT_BACKUP:
+			rtl92s_phy_set_fw_cmd(hw, FW_CMD_PAUSE_DM_BY_SCAN);
+			break;
+		case SCAN_OPT_RESTORE:
+			rtl92s_phy_set_fw_cmd(hw, FW_CMD_RESUME_DM_BY_SCAN);
+			break;
+		default:
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 ("Unknown operation.\n"));
+			break;
+		}
+	}
+}
+
+void rtl92s_phy_set_bw_mode(struct ieee80211_hw *hw,
+			    enum nl80211_channel_type ch_type)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	u8 reg_bw_opmode;
+	u8 reg_prsr_rsc;
+
+	RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, ("Switch to %s bandwidth\n",
+		  rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20 ?
+		  "20MHz" : "40MHz"));
+
+	if (rtlphy->set_bwmode_inprogress)
+		return;
+	if (is_hal_stop(rtlhal))
+		return;
+
+	rtlphy->set_bwmode_inprogress = true;
+
+	reg_bw_opmode = rtl_read_byte(rtlpriv, BW_OPMODE);
+	reg_prsr_rsc = rtl_read_byte(rtlpriv, RRSR + 2);
+
+	switch (rtlphy->current_chan_bw) {
+	case HT_CHANNEL_WIDTH_20:
+		reg_bw_opmode |= BW_OPMODE_20MHZ;
+		rtl_write_byte(rtlpriv, BW_OPMODE, reg_bw_opmode);
+		break;
+	case HT_CHANNEL_WIDTH_20_40:
+		reg_bw_opmode &= ~BW_OPMODE_20MHZ;
+		rtl_write_byte(rtlpriv, BW_OPMODE, reg_bw_opmode);
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("unknown bandwidth: %#X\n",
+			 rtlphy->current_chan_bw));
+		break;
+	}
+
+	switch (rtlphy->current_chan_bw) {
+	case HT_CHANNEL_WIDTH_20:
+		rtl_set_bbreg(hw, RFPGA0_RFMOD, BRFMOD, 0x0);
+		rtl_set_bbreg(hw, RFPGA1_RFMOD, BRFMOD, 0x0);
+
+		if (rtlhal->version >= VERSION_8192S_BCUT)
+			rtl_write_byte(rtlpriv, RFPGA0_ANALOGPARAMETER2, 0x58);
+		break;
+	case HT_CHANNEL_WIDTH_20_40:
+		rtl_set_bbreg(hw, RFPGA0_RFMOD, BRFMOD, 0x1);
+		rtl_set_bbreg(hw, RFPGA1_RFMOD, BRFMOD, 0x1);
+
+		rtl_set_bbreg(hw, RCCK0_SYSTEM, BCCK_SIDEBAND,
+				(mac->cur_40_prime_sc >> 1));
+		rtl_set_bbreg(hw, ROFDM1_LSTF, 0xC00, mac->cur_40_prime_sc);
+
+		if (rtlhal->version >= VERSION_8192S_BCUT)
+			rtl_write_byte(rtlpriv, RFPGA0_ANALOGPARAMETER2, 0x18);
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("unknown bandwidth: %#X\n", rtlphy->current_chan_bw));
+		break;
+	}
+
+	rtl92s_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
+	rtlphy->set_bwmode_inprogress = false;
+	RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, ("<==\n"));
+}
+
+static bool _rtl92s_phy_set_sw_chnl_cmdarray(struct swchnlcmd *cmdtable,
+		u32 cmdtableidx, u32 cmdtablesz, enum swchnlcmd_id cmdid,
+		u32 para1, u32 para2, u32 msdelay)
+{
+	struct swchnlcmd *pcmd;
+
+	if (cmdtable == NULL) {
+		RT_ASSERT(false, ("cmdtable cannot be NULL.\n"));
+		return false;
+	}
+
+	if (cmdtableidx >= cmdtablesz)
+		return false;
+
+	pcmd = cmdtable + cmdtableidx;
+	pcmd->cmdid = cmdid;
+	pcmd->para1 = para1;
+	pcmd->para2 = para2;
+	pcmd->msdelay = msdelay;
+
+	return true;
+}
+
+static bool _rtl92s_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
+	     u8 channel, u8 *stage, u8 *step, u32 *delay)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct swchnlcmd precommoncmd[MAX_PRECMD_CNT];
+	u32 precommoncmdcnt;
+	struct swchnlcmd postcommoncmd[MAX_POSTCMD_CNT];
+	u32 postcommoncmdcnt;
+	struct swchnlcmd rfdependcmd[MAX_RFDEPENDCMD_CNT];
+	u32 rfdependcmdcnt;
+	struct swchnlcmd *currentcmd = NULL;
+	u8 rfpath;
+	u8 num_total_rfpath = rtlphy->num_total_rfpath;
+
+	precommoncmdcnt = 0;
+	_rtl92s_phy_set_sw_chnl_cmdarray(precommoncmd, precommoncmdcnt++,
+			MAX_PRECMD_CNT, CMDID_SET_TXPOWEROWER_LEVEL, 0, 0, 0);
+	_rtl92s_phy_set_sw_chnl_cmdarray(precommoncmd, precommoncmdcnt++,
+			MAX_PRECMD_CNT, CMDID_END, 0, 0, 0);
+
+	postcommoncmdcnt = 0;
+
+	_rtl92s_phy_set_sw_chnl_cmdarray(postcommoncmd, postcommoncmdcnt++,
+			MAX_POSTCMD_CNT, CMDID_END, 0, 0, 0);
+
+	rfdependcmdcnt = 0;
+
+	RT_ASSERT((channel >= 1 && channel <= 14),
+		  ("illegal channel for Zebra: %d\n", channel));
+
+	_rtl92s_phy_set_sw_chnl_cmdarray(rfdependcmd, rfdependcmdcnt++,
+					 MAX_RFDEPENDCMD_CNT, CMDID_RF_WRITEREG,
+					 RF_CHNLBW, channel, 10);
+
+	_rtl92s_phy_set_sw_chnl_cmdarray(rfdependcmd, rfdependcmdcnt++,
+			MAX_RFDEPENDCMD_CNT, CMDID_END, 0, 0, 0);
+
+	do {
+		switch (*stage) {
+		case 0:
+			currentcmd = &precommoncmd[*step];
+			break;
+		case 1:
+			currentcmd = &rfdependcmd[*step];
+			break;
+		case 2:
+			currentcmd = &postcommoncmd[*step];
+			break;
+		}
+
+		if (currentcmd->cmdid == CMDID_END) {
+			if ((*stage) == 2) {
+				return true;
+			} else {
+				(*stage)++;
+				(*step) = 0;
+				continue;
+			}
+		}
+
+		switch (currentcmd->cmdid) {
+		case CMDID_SET_TXPOWEROWER_LEVEL:
+			rtl92s_phy_set_txpower(hw, channel);
+			break;
+		case CMDID_WRITEPORT_ULONG:
+			rtl_write_dword(rtlpriv, currentcmd->para1,
+					currentcmd->para2);
+			break;
+		case CMDID_WRITEPORT_USHORT:
+			rtl_write_word(rtlpriv, currentcmd->para1,
+				       (u16)currentcmd->para2);
+			break;
+		case CMDID_WRITEPORT_UCHAR:
+			rtl_write_byte(rtlpriv, currentcmd->para1,
+				       (u8)currentcmd->para2);
+			break;
+		case CMDID_RF_WRITEREG:
+			for (rfpath = 0; rfpath < num_total_rfpath; rfpath++) {
+				rtlphy->rfreg_chnlval[rfpath] =
+					 ((rtlphy->rfreg_chnlval[rfpath] &
+					 0xfffffc00) | currentcmd->para2);
+				rtl_set_rfreg(hw, (enum radio_path)rfpath,
+					      currentcmd->para1,
+					      RFREG_OFFSET_MASK,
+					      rtlphy->rfreg_chnlval[rfpath]);
+			}
+			break;
+		default:
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 ("switch case not process\n"));
+			break;
+		}
+
+		break;
+	} while (true);
+
+	(*delay) = currentcmd->msdelay;
+	(*step)++;
+	return false;
+}
+
+u8 rtl92s_phy_sw_chnl(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u32 delay;
+	bool ret;
+
+	RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE,
+		 ("switch to channel%d\n",
+		 rtlphy->current_channel));
+
+	if (rtlphy->sw_chnl_inprogress)
+		return 0;
+
+	if (rtlphy->set_bwmode_inprogress)
+		return 0;
+
+	if (is_hal_stop(rtlhal))
+		return 0;
+
+	rtlphy->sw_chnl_inprogress = true;
+	rtlphy->sw_chnl_stage = 0;
+	rtlphy->sw_chnl_step = 0;
+
+	do {
+		if (!rtlphy->sw_chnl_inprogress)
+			break;
+
+		ret = _rtl92s_phy_sw_chnl_step_by_step(hw,
+				 rtlphy->current_channel,
+				 &rtlphy->sw_chnl_stage,
+				 &rtlphy->sw_chnl_step, &delay);
+		if (!ret) {
+			if (delay > 0)
+				mdelay(delay);
+			else
+				continue;
+		} else {
+			rtlphy->sw_chnl_inprogress = false;
+		}
+		break;
+	} while (true);
+
+	rtlphy->sw_chnl_inprogress = false;
+
+	RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, ("<==\n"));
+
+	return 1;
+}
+
+static void _rtl92se_phy_set_rf_sleep(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 u1btmp;
+
+	u1btmp = rtl_read_byte(rtlpriv, LDOV12D_CTRL);
+	u1btmp |= BIT(0);
+
+	rtl_write_byte(rtlpriv, LDOV12D_CTRL, u1btmp);
+	rtl_write_byte(rtlpriv, SPS1_CTRL, 0x0);
+	rtl_write_byte(rtlpriv, TXPAUSE, 0xFF);
+	rtl_write_word(rtlpriv, CMDR, 0x57FC);
+	udelay(100);
+
+	rtl_write_word(rtlpriv, CMDR, 0x77FC);
+	rtl_write_byte(rtlpriv, PHY_CCA, 0x0);
+	udelay(10);
+
+	rtl_write_word(rtlpriv, CMDR, 0x37FC);
+	udelay(10);
+
+	rtl_write_word(rtlpriv, CMDR, 0x77FC);
+	udelay(10);
+
+	rtl_write_word(rtlpriv, CMDR, 0x57FC);
+
+	/* we should chnge GPIO to input mode
+	 * this will drop away current about 25mA*/
+	rtl8192se_gpiobit3_cfg_inputmode(hw);
+}
+
+bool rtl92s_phy_set_rf_power_state(struct ieee80211_hw *hw,
+				   enum rf_pwrstate rfpwr_state)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	bool bresult = true;
+	u8 i, queue_id;
+	struct rtl8192_tx_ring *ring = NULL;
+
+	if (rfpwr_state == ppsc->rfpwr_state)
+		return false;
+
+	ppsc->set_rfpowerstate_inprogress = true;
+
+	switch (rfpwr_state) {
+	case ERFON:{
+			if ((ppsc->rfpwr_state == ERFOFF) &&
+			    RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC)) {
+
+				bool rtstatus;
+				u32 InitializeCount = 0;
+				do {
+					InitializeCount++;
+					RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+						 ("IPS Set eRf nic enable\n"));
+					rtstatus = rtl_ps_enable_nic(hw);
+				} while ((rtstatus != true) &&
+					 (InitializeCount < 10));
+
+				RT_CLEAR_PS_LEVEL(ppsc,
+						  RT_RF_OFF_LEVL_HALT_NIC);
+			} else {
+				RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG,
+					 ("awake, sleeped:%d ms "
+					"state_inap:%x\n",
+					jiffies_to_msecs(jiffies -
+					ppsc->last_sleep_jiffies),
+					rtlpriv->psc.state_inap));
+				ppsc->last_awake_jiffies = jiffies;
+				rtl_write_word(rtlpriv, CMDR, 0x37FC);
+				rtl_write_byte(rtlpriv, TXPAUSE, 0x00);
+				rtl_write_byte(rtlpriv, PHY_CCA, 0x3);
+			}
+
+			if (mac->link_state == MAC80211_LINKED)
+				rtlpriv->cfg->ops->led_control(hw,
+							 LED_CTL_LINK);
+			else
+				rtlpriv->cfg->ops->led_control(hw,
+							 LED_CTL_NO_LINK);
+			break;
+		}
+	case ERFOFF:{
+			if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC) {
+				RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+					 ("IPS Set eRf nic disable\n"));
+				rtl_ps_disable_nic(hw);
+				RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+			} else {
+				if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS)
+					rtlpriv->cfg->ops->led_control(hw,
+							 LED_CTL_NO_LINK);
+				else
+					rtlpriv->cfg->ops->led_control(hw,
+							 LED_CTL_POWER_OFF);
+			}
+			break;
+		}
+	case ERFSLEEP:
+			if (ppsc->rfpwr_state == ERFOFF)
+				break;
+
+			for (queue_id = 0, i = 0;
+			     queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) {
+				ring = &pcipriv->dev.tx_ring[queue_id];
+				if (skb_queue_len(&ring->queue) == 0 ||
+					queue_id == BEACON_QUEUE) {
+					queue_id++;
+					continue;
+				} else {
+					RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+						 ("eRf Off/Sleep: "
+						 "%d times TcbBusyQueue[%d] = "
+						 "%d before doze!\n",
+						 (i + 1), queue_id,
+						 skb_queue_len(&ring->queue)));
+
+					udelay(10);
+					i++;
+				}
+
+				if (i >= MAX_DOZE_WAITING_TIMES_9x) {
+					RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+						 ("\nERFOFF: %d times"
+						 "TcbBusyQueue[%d] = %d !\n",
+						 MAX_DOZE_WAITING_TIMES_9x,
+						 queue_id,
+						 skb_queue_len(&ring->queue)));
+					break;
+				}
+			}
+
+			RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG,
+				 ("Set ERFSLEEP awaked:%d ms\n",
+				 jiffies_to_msecs(jiffies -
+				 ppsc->last_awake_jiffies)));
+
+			RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG,
+				 ("sleep awaked:%d ms "
+				"state_inap:%x\n", jiffies_to_msecs(jiffies -
+				ppsc->last_awake_jiffies),
+				rtlpriv->psc.state_inap));
+			ppsc->last_sleep_jiffies = jiffies;
+			_rtl92se_phy_set_rf_sleep(hw);
+	    break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("switch case not process\n"));
+		bresult = false;
+		break;
+	}
+
+	if (bresult)
+		ppsc->rfpwr_state = rfpwr_state;
+
+	ppsc->set_rfpowerstate_inprogress = false;
+
+	return bresult;
+}
+
+static bool _rtl92s_phy_config_rfpa_bias_current(struct ieee80211_hw *hw,
+						 enum radio_path rfpath)
+{
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	bool rtstatus = true;
+	u32 tmpval = 0;
+
+	/* If inferiority IC, we have to increase the PA bias current */
+	if (rtlhal->ic_class != IC_INFERIORITY_A) {
+		tmpval = rtl92s_phy_query_rf_reg(hw, rfpath, RF_IPA, 0xf);
+		rtl92s_phy_set_rf_reg(hw, rfpath, RF_IPA, 0xf, tmpval + 1);
+	}
+
+	return rtstatus;
+}
+
+static void _rtl92s_store_pwrindex_diffrate_offset(struct ieee80211_hw *hw,
+		u32 reg_addr, u32 bitmask, u32 data)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	if (reg_addr == RTXAGC_RATE18_06)
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][0] =
+									 data;
+	if (reg_addr == RTXAGC_RATE54_24)
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][1] =
+									 data;
+	if (reg_addr == RTXAGC_CCK_MCS32)
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][6] =
+									 data;
+	if (reg_addr == RTXAGC_MCS03_MCS00)
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][2] =
+									 data;
+	if (reg_addr == RTXAGC_MCS07_MCS04)
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][3] =
+									 data;
+	if (reg_addr == RTXAGC_MCS11_MCS08)
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][4] =
+									 data;
+	if (reg_addr == RTXAGC_MCS15_MCS12) {
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][5] =
+									 data;
+		rtlphy->pwrgroup_cnt++;
+	}
+}
+
+static void _rtl92s_phy_init_register_definition(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	/*RF Interface Sowrtware Control */
+	rtlphy->phyreg_def[RF90_PATH_A].rfintfs = RFPGA0_XAB_RFINTERFACESW;
+	rtlphy->phyreg_def[RF90_PATH_B].rfintfs = RFPGA0_XAB_RFINTERFACESW;
+	rtlphy->phyreg_def[RF90_PATH_C].rfintfs = RFPGA0_XCD_RFINTERFACESW;
+	rtlphy->phyreg_def[RF90_PATH_D].rfintfs = RFPGA0_XCD_RFINTERFACESW;
+
+	/* RF Interface Readback Value */
+	rtlphy->phyreg_def[RF90_PATH_A].rfintfi = RFPGA0_XAB_RFINTERFACERB;
+	rtlphy->phyreg_def[RF90_PATH_B].rfintfi = RFPGA0_XAB_RFINTERFACERB;
+	rtlphy->phyreg_def[RF90_PATH_C].rfintfi = RFPGA0_XCD_RFINTERFACERB;
+	rtlphy->phyreg_def[RF90_PATH_D].rfintfi = RFPGA0_XCD_RFINTERFACERB;
+
+	/* RF Interface Output (and Enable) */
+	rtlphy->phyreg_def[RF90_PATH_A].rfintfo = RFPGA0_XA_RFINTERFACEOE;
+	rtlphy->phyreg_def[RF90_PATH_B].rfintfo = RFPGA0_XB_RFINTERFACEOE;
+	rtlphy->phyreg_def[RF90_PATH_C].rfintfo = RFPGA0_XC_RFINTERFACEOE;
+	rtlphy->phyreg_def[RF90_PATH_D].rfintfo = RFPGA0_XD_RFINTERFACEOE;
+
+	/* RF Interface (Output and)  Enable */
+	rtlphy->phyreg_def[RF90_PATH_A].rfintfe = RFPGA0_XA_RFINTERFACEOE;
+	rtlphy->phyreg_def[RF90_PATH_B].rfintfe = RFPGA0_XB_RFINTERFACEOE;
+	rtlphy->phyreg_def[RF90_PATH_C].rfintfe = RFPGA0_XC_RFINTERFACEOE;
+	rtlphy->phyreg_def[RF90_PATH_D].rfintfe = RFPGA0_XD_RFINTERFACEOE;
+
+	/* Addr of LSSI. Wirte RF register by driver */
+	rtlphy->phyreg_def[RF90_PATH_A].rf3wire_offset =
+						 RFPGA0_XA_LSSIPARAMETER;
+	rtlphy->phyreg_def[RF90_PATH_B].rf3wire_offset =
+						 RFPGA0_XB_LSSIPARAMETER;
+	rtlphy->phyreg_def[RF90_PATH_C].rf3wire_offset =
+						 RFPGA0_XC_LSSIPARAMETER;
+	rtlphy->phyreg_def[RF90_PATH_D].rf3wire_offset =
+						 RFPGA0_XD_LSSIPARAMETER;
+
+	/* RF parameter */
+	rtlphy->phyreg_def[RF90_PATH_A].rflssi_select = RFPGA0_XAB_RFPARAMETER;
+	rtlphy->phyreg_def[RF90_PATH_B].rflssi_select = RFPGA0_XAB_RFPARAMETER;
+	rtlphy->phyreg_def[RF90_PATH_C].rflssi_select = RFPGA0_XCD_RFPARAMETER;
+	rtlphy->phyreg_def[RF90_PATH_D].rflssi_select = RFPGA0_XCD_RFPARAMETER;
+
+	/* Tx AGC Gain Stage (same for all path. Should we remove this?) */
+	rtlphy->phyreg_def[RF90_PATH_A].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+	rtlphy->phyreg_def[RF90_PATH_B].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+	rtlphy->phyreg_def[RF90_PATH_C].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+	rtlphy->phyreg_def[RF90_PATH_D].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+
+	/* Tranceiver A~D HSSI Parameter-1 */
+	rtlphy->phyreg_def[RF90_PATH_A].rfhssi_para1 = RFPGA0_XA_HSSIPARAMETER1;
+	rtlphy->phyreg_def[RF90_PATH_B].rfhssi_para1 = RFPGA0_XB_HSSIPARAMETER1;
+	rtlphy->phyreg_def[RF90_PATH_C].rfhssi_para1 = RFPGA0_XC_HSSIPARAMETER1;
+	rtlphy->phyreg_def[RF90_PATH_D].rfhssi_para1 = RFPGA0_XD_HSSIPARAMETER1;
+
+	/* Tranceiver A~D HSSI Parameter-2 */
+	rtlphy->phyreg_def[RF90_PATH_A].rfhssi_para2 = RFPGA0_XA_HSSIPARAMETER2;
+	rtlphy->phyreg_def[RF90_PATH_B].rfhssi_para2 = RFPGA0_XB_HSSIPARAMETER2;
+	rtlphy->phyreg_def[RF90_PATH_C].rfhssi_para2 = RFPGA0_XC_HSSIPARAMETER2;
+	rtlphy->phyreg_def[RF90_PATH_D].rfhssi_para2 = RFPGA0_XD_HSSIPARAMETER2;
+
+	/* RF switch Control */
+	rtlphy->phyreg_def[RF90_PATH_A].rfswitch_control =
+						 RFPGA0_XAB_SWITCHCONTROL;
+	rtlphy->phyreg_def[RF90_PATH_B].rfswitch_control =
+						 RFPGA0_XAB_SWITCHCONTROL;
+	rtlphy->phyreg_def[RF90_PATH_C].rfswitch_control =
+						 RFPGA0_XCD_SWITCHCONTROL;
+	rtlphy->phyreg_def[RF90_PATH_D].rfswitch_control =
+						 RFPGA0_XCD_SWITCHCONTROL;
+
+	/* AGC control 1  */
+	rtlphy->phyreg_def[RF90_PATH_A].rfagc_control1 = ROFDM0_XAAGCCORE1;
+	rtlphy->phyreg_def[RF90_PATH_B].rfagc_control1 = ROFDM0_XBAGCCORE1;
+	rtlphy->phyreg_def[RF90_PATH_C].rfagc_control1 = ROFDM0_XCAGCCORE1;
+	rtlphy->phyreg_def[RF90_PATH_D].rfagc_control1 = ROFDM0_XDAGCCORE1;
+
+	/* AGC control 2  */
+	rtlphy->phyreg_def[RF90_PATH_A].rfagc_control2 = ROFDM0_XAAGCCORE2;
+	rtlphy->phyreg_def[RF90_PATH_B].rfagc_control2 = ROFDM0_XBAGCCORE2;
+	rtlphy->phyreg_def[RF90_PATH_C].rfagc_control2 = ROFDM0_XCAGCCORE2;
+	rtlphy->phyreg_def[RF90_PATH_D].rfagc_control2 = ROFDM0_XDAGCCORE2;
+
+	/* RX AFE control 1  */
+	rtlphy->phyreg_def[RF90_PATH_A].rfrxiq_imbalance =
+						 ROFDM0_XARXIQIMBALANCE;
+	rtlphy->phyreg_def[RF90_PATH_B].rfrxiq_imbalance =
+						 ROFDM0_XBRXIQIMBALANCE;
+	rtlphy->phyreg_def[RF90_PATH_C].rfrxiq_imbalance =
+						 ROFDM0_XCRXIQIMBALANCE;
+	rtlphy->phyreg_def[RF90_PATH_D].rfrxiq_imbalance =
+						 ROFDM0_XDRXIQIMBALANCE;
+
+	/* RX AFE control 1   */
+	rtlphy->phyreg_def[RF90_PATH_A].rfrx_afe = ROFDM0_XARXAFE;
+	rtlphy->phyreg_def[RF90_PATH_B].rfrx_afe = ROFDM0_XBRXAFE;
+	rtlphy->phyreg_def[RF90_PATH_C].rfrx_afe = ROFDM0_XCRXAFE;
+	rtlphy->phyreg_def[RF90_PATH_D].rfrx_afe = ROFDM0_XDRXAFE;
+
+	/* Tx AFE control 1  */
+	rtlphy->phyreg_def[RF90_PATH_A].rftxiq_imbalance =
+						 ROFDM0_XATXIQIMBALANCE;
+	rtlphy->phyreg_def[RF90_PATH_B].rftxiq_imbalance =
+						 ROFDM0_XBTXIQIMBALANCE;
+	rtlphy->phyreg_def[RF90_PATH_C].rftxiq_imbalance =
+						 ROFDM0_XCTXIQIMBALANCE;
+	rtlphy->phyreg_def[RF90_PATH_D].rftxiq_imbalance =
+						 ROFDM0_XDTXIQIMBALANCE;
+
+	/* Tx AFE control 2  */
+	rtlphy->phyreg_def[RF90_PATH_A].rftx_afe = ROFDM0_XATXAFE;
+	rtlphy->phyreg_def[RF90_PATH_B].rftx_afe = ROFDM0_XBTXAFE;
+	rtlphy->phyreg_def[RF90_PATH_C].rftx_afe = ROFDM0_XCTXAFE;
+	rtlphy->phyreg_def[RF90_PATH_D].rftx_afe = ROFDM0_XDTXAFE;
+
+	/* Tranceiver LSSI Readback */
+	rtlphy->phyreg_def[RF90_PATH_A].rflssi_readback =
+			 RFPGA0_XA_LSSIREADBACK;
+	rtlphy->phyreg_def[RF90_PATH_B].rflssi_readback =
+			 RFPGA0_XB_LSSIREADBACK;
+	rtlphy->phyreg_def[RF90_PATH_C].rflssi_readback =
+			 RFPGA0_XC_LSSIREADBACK;
+	rtlphy->phyreg_def[RF90_PATH_D].rflssi_readback =
+			 RFPGA0_XD_LSSIREADBACK;
+
+	/* Tranceiver LSSI Readback PI mode  */
+	rtlphy->phyreg_def[RF90_PATH_A].rflssi_readbackpi =
+			 TRANSCEIVERA_HSPI_READBACK;
+	rtlphy->phyreg_def[RF90_PATH_B].rflssi_readbackpi =
+			 TRANSCEIVERB_HSPI_READBACK;
+}
+
+
+static bool _rtl92s_phy_config_bb(struct ieee80211_hw *hw, u8 configtype)
+{
+	int i;
+	u32 *phy_reg_table;
+	u32 *agc_table;
+	u16 phy_reg_len, agc_len;
+
+	agc_len = AGCTAB_ARRAYLENGTH;
+	agc_table = rtl8192seagctab_array;
+	/* Default RF_type: 2T2R */
+	phy_reg_len = PHY_REG_2T2RARRAYLENGTH;
+	phy_reg_table = rtl8192sephy_reg_2t2rarray;
+
+	if (configtype == BASEBAND_CONFIG_PHY_REG) {
+		for (i = 0; i < phy_reg_len; i = i + 2) {
+			if (phy_reg_table[i] == 0xfe)
+				mdelay(50);
+			else if (phy_reg_table[i] == 0xfd)
+				mdelay(5);
+			else if (phy_reg_table[i] == 0xfc)
+				mdelay(1);
+			else if (phy_reg_table[i] == 0xfb)
+				udelay(50);
+			else if (phy_reg_table[i] == 0xfa)
+				udelay(5);
+			else if (phy_reg_table[i] == 0xf9)
+				udelay(1);
+
+			/* Add delay for ECS T20 & LG malow platform, */
+			udelay(1);
+
+			rtl92s_phy_set_bb_reg(hw, phy_reg_table[i], MASKDWORD,
+					phy_reg_table[i + 1]);
+		}
+	} else if (configtype == BASEBAND_CONFIG_AGC_TAB) {
+		for (i = 0; i < agc_len; i = i + 2) {
+			rtl92s_phy_set_bb_reg(hw, agc_table[i], MASKDWORD,
+					agc_table[i + 1]);
+
+			/* Add delay for ECS T20 & LG malow platform */
+			udelay(1);
+		}
+	}
+
+	return true;
+}
+
+static bool _rtl92s_phy_set_bb_to_diff_rf(struct ieee80211_hw *hw,
+					  u8 configtype)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u32 *phy_regarray2xtxr_table;
+	u16 phy_regarray2xtxr_len;
+	int i;
+
+	if (rtlphy->rf_type == RF_1T1R) {
+		phy_regarray2xtxr_table = rtl8192sephy_changeto_1t1rarray;
+		phy_regarray2xtxr_len = PHY_CHANGETO_1T1RARRAYLENGTH;
+	} else if (rtlphy->rf_type == RF_1T2R) {
+		phy_regarray2xtxr_table = rtl8192sephy_changeto_1t2rarray;
+		phy_regarray2xtxr_len = PHY_CHANGETO_1T2RARRAYLENGTH;
+	} else {
+		return false;
+	}
+
+	if (configtype == BASEBAND_CONFIG_PHY_REG) {
+		for (i = 0; i < phy_regarray2xtxr_len; i = i + 3) {
+			if (phy_regarray2xtxr_table[i] == 0xfe)
+				mdelay(50);
+			else if (phy_regarray2xtxr_table[i] == 0xfd)
+				mdelay(5);
+			else if (phy_regarray2xtxr_table[i] == 0xfc)
+				mdelay(1);
+			else if (phy_regarray2xtxr_table[i] == 0xfb)
+				udelay(50);
+			else if (phy_regarray2xtxr_table[i] == 0xfa)
+				udelay(5);
+			else if (phy_regarray2xtxr_table[i] == 0xf9)
+				udelay(1);
+
+			rtl92s_phy_set_bb_reg(hw, phy_regarray2xtxr_table[i],
+				phy_regarray2xtxr_table[i + 1],
+				phy_regarray2xtxr_table[i + 2]);
+		}
+	}
+
+	return true;
+}
+
+static bool _rtl92s_phy_config_bb_with_pg(struct ieee80211_hw *hw,
+					  u8 configtype)
+{
+	int i;
+	u32 *phy_table_pg;
+	u16 phy_pg_len;
+
+	phy_pg_len = PHY_REG_ARRAY_PGLENGTH;
+	phy_table_pg = rtl8192sephy_reg_array_pg;
+
+	if (configtype == BASEBAND_CONFIG_PHY_REG) {
+		for (i = 0; i < phy_pg_len; i = i + 3) {
+			if (phy_table_pg[i] == 0xfe)
+				mdelay(50);
+			else if (phy_table_pg[i] == 0xfd)
+				mdelay(5);
+			else if (phy_table_pg[i] == 0xfc)
+				mdelay(1);
+			else if (phy_table_pg[i] == 0xfb)
+				udelay(50);
+			else if (phy_table_pg[i] == 0xfa)
+				udelay(5);
+			else if (phy_table_pg[i] == 0xf9)
+				udelay(1);
+
+			_rtl92s_store_pwrindex_diffrate_offset(hw,
+					phy_table_pg[i],
+					phy_table_pg[i + 1],
+					phy_table_pg[i + 2]);
+			rtl92s_phy_set_bb_reg(hw, phy_table_pg[i],
+					phy_table_pg[i + 1],
+					phy_table_pg[i + 2]);
+		}
+	}
+
+	return true;
+}
+
+static bool _rtl92s_phy_bb_config_parafile(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	bool rtstatus = true;
+
+	/* 1. Read PHY_REG.TXT BB INIT!! */
+	/* We will separate as 1T1R/1T2R/1T2R_GREEN/2T2R */
+	if (rtlphy->rf_type == RF_1T2R || rtlphy->rf_type == RF_2T2R ||
+	    rtlphy->rf_type == RF_1T1R || rtlphy->rf_type == RF_2T2R_GREEN) {
+		rtstatus = _rtl92s_phy_config_bb(hw, BASEBAND_CONFIG_PHY_REG);
+
+		if (rtlphy->rf_type != RF_2T2R &&
+		    rtlphy->rf_type != RF_2T2R_GREEN)
+			/* so we should reconfig BB reg with the right
+			 * PHY parameters. */
+			rtstatus = _rtl92s_phy_set_bb_to_diff_rf(hw,
+						BASEBAND_CONFIG_PHY_REG);
+	} else {
+		rtstatus = false;
+	}
+
+	if (rtstatus != true) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+			 ("Write BB Reg Fail!!"));
+		goto phy_BB8190_Config_ParaFile_Fail;
+	}
+
+	/* 2. If EEPROM or EFUSE autoload OK, We must config by
+	 *    PHY_REG_PG.txt */
+	if (rtlefuse->autoload_failflag == false) {
+		rtlphy->pwrgroup_cnt = 0;
+
+		rtstatus = _rtl92s_phy_config_bb_with_pg(hw,
+						 BASEBAND_CONFIG_PHY_REG);
+	}
+	if (rtstatus != true) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+			 ("_rtl92s_phy_bb_config_parafile(): "
+			 "BB_PG Reg Fail!!"));
+		goto phy_BB8190_Config_ParaFile_Fail;
+	}
+
+	/* 3. BB AGC table Initialization */
+	rtstatus = _rtl92s_phy_config_bb(hw, BASEBAND_CONFIG_AGC_TAB);
+
+	if (rtstatus != true) {
+		printk(KERN_ERR  "_rtl92s_phy_bb_config_parafile(): "
+		       "AGC Table Fail\n");
+		goto phy_BB8190_Config_ParaFile_Fail;
+	}
+
+	/* Check if the CCK HighPower is turned ON. */
+	/* This is used to calculate PWDB. */
+	rtlphy->cck_high_power = (bool)(rtl92s_phy_query_bb_reg(hw,
+			RFPGA0_XA_HSSIPARAMETER2, 0x200));
+
+phy_BB8190_Config_ParaFile_Fail:
+	return rtstatus;
+}
+
+u8 rtl92s_phy_config_rf(struct ieee80211_hw *hw, enum radio_path rfpath)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	int i;
+	bool rtstatus = true;
+	u32 *radio_a_table;
+	u32 *radio_b_table;
+	u16 radio_a_tblen, radio_b_tblen;
+
+	radio_a_tblen = RADIOA_1T_ARRAYLENGTH;
+	radio_a_table = rtl8192seradioa_1t_array;
+
+	/* Using Green mode array table for RF_2T2R_GREEN */
+	if (rtlphy->rf_type == RF_2T2R_GREEN) {
+		radio_b_table = rtl8192seradiob_gm_array;
+		radio_b_tblen = RADIOB_GM_ARRAYLENGTH;
+	} else {
+		radio_b_table = rtl8192seradiob_array;
+		radio_b_tblen = RADIOB_ARRAYLENGTH;
+	}
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Radio No %x\n", rfpath));
+	rtstatus = true;
+
+	switch (rfpath) {
+	case RF90_PATH_A:
+		for (i = 0; i < radio_a_tblen; i = i + 2) {
+			if (radio_a_table[i] == 0xfe)
+				/* Delay specific ms. Only RF configuration
+				 * requires delay. */
+				mdelay(50);
+			else if (radio_a_table[i] == 0xfd)
+				mdelay(5);
+			else if (radio_a_table[i] == 0xfc)
+				mdelay(1);
+			else if (radio_a_table[i] == 0xfb)
+				udelay(50);
+			else if (radio_a_table[i] == 0xfa)
+				udelay(5);
+			else if (radio_a_table[i] == 0xf9)
+				udelay(1);
+			else
+				rtl92s_phy_set_rf_reg(hw, rfpath,
+						      radio_a_table[i],
+						      MASK20BITS,
+						      radio_a_table[i + 1]);
+
+			/* Add delay for ECS T20 & LG malow platform */
+			udelay(1);
+		}
+
+		/* PA Bias current for inferiority IC */
+		_rtl92s_phy_config_rfpa_bias_current(hw, rfpath);
+		break;
+	case RF90_PATH_B:
+		for (i = 0; i < radio_b_tblen; i = i + 2) {
+			if (radio_b_table[i] == 0xfe)
+				/* Delay specific ms. Only RF configuration
+				 * requires delay.*/
+				mdelay(50);
+			else if (radio_b_table[i] == 0xfd)
+				mdelay(5);
+			else if (radio_b_table[i] == 0xfc)
+				mdelay(1);
+			else if (radio_b_table[i] == 0xfb)
+				udelay(50);
+			else if (radio_b_table[i] == 0xfa)
+				udelay(5);
+			else if (radio_b_table[i] == 0xf9)
+				udelay(1);
+			else
+				rtl92s_phy_set_rf_reg(hw, rfpath,
+						      radio_b_table[i],
+						      MASK20BITS,
+						      radio_b_table[i + 1]);
+
+			/* Add delay for ECS T20 & LG malow platform */
+			udelay(1);
+		}
+		break;
+	case RF90_PATH_C:
+		;
+		break;
+	case RF90_PATH_D:
+		;
+		break;
+	default:
+		break;
+	}
+
+	return rtstatus;
+}
+
+
+bool rtl92s_phy_mac_config(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 i;
+	u32 arraylength;
+	u32 *ptraArray;
+
+	arraylength = MAC_2T_ARRAYLENGTH;
+	ptraArray = rtl8192semac_2t_array;
+
+	for (i = 0; i < arraylength; i = i + 2)
+		rtl_write_byte(rtlpriv, ptraArray[i], (u8)ptraArray[i + 1]);
+
+	return true;
+}
+
+
+bool rtl92s_phy_bb_config(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	bool rtstatus = true;
+	u8 pathmap, index, rf_num = 0;
+	u8 path1, path2;
+
+	_rtl92s_phy_init_register_definition(hw);
+
+	/* Config BB and AGC */
+	rtstatus = _rtl92s_phy_bb_config_parafile(hw);
+
+
+	/* Check BB/RF confiuration setting. */
+	/* We only need to configure RF which is turned on. */
+	path1 = (u8)(rtl92s_phy_query_bb_reg(hw, RFPGA0_TXINFO, 0xf));
+	mdelay(10);
+	path2 = (u8)(rtl92s_phy_query_bb_reg(hw, ROFDM0_TRXPATHENABLE, 0xf));
+	pathmap = path1 | path2;
+
+	rtlphy->rf_pathmap = pathmap;
+	for (index = 0; index < 4; index++) {
+		if ((pathmap >> index) & 0x1)
+			rf_num++;
+	}
+
+	if ((rtlphy->rf_type == RF_1T1R && rf_num != 1) ||
+	    (rtlphy->rf_type == RF_1T2R && rf_num != 2) ||
+	    (rtlphy->rf_type == RF_2T2R && rf_num != 2) ||
+	    (rtlphy->rf_type == RF_2T2R_GREEN && rf_num != 2)) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+			 ("RF_Type(%x) does not match "
+			 "RF_Num(%x)!!\n", rtlphy->rf_type, rf_num));
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+			 ("path1 0x%x, path2 0x%x, pathmap "
+			  "0x%x\n", path1, path2, pathmap));
+	}
+
+	return rtstatus;
+}
+
+bool rtl92s_phy_rf_config(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	/* Initialize general global value */
+	if (rtlphy->rf_type == RF_1T1R)
+		rtlphy->num_total_rfpath = 1;
+	else
+		rtlphy->num_total_rfpath = 2;
+
+	/* Config BB and RF */
+	return rtl92s_phy_rf6052_config(hw);
+}
+
+void rtl92s_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	/* read rx initial gain */
+	rtlphy->default_initialgain[0] = rtl_get_bbreg(hw,
+			ROFDM0_XAAGCCORE1, MASKBYTE0);
+	rtlphy->default_initialgain[1] = rtl_get_bbreg(hw,
+			ROFDM0_XBAGCCORE1, MASKBYTE0);
+	rtlphy->default_initialgain[2] = rtl_get_bbreg(hw,
+			ROFDM0_XCAGCCORE1, MASKBYTE0);
+	rtlphy->default_initialgain[3] = rtl_get_bbreg(hw,
+			ROFDM0_XDAGCCORE1, MASKBYTE0);
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Default initial gain "
+		 "(c50=0x%x, c58=0x%x, c60=0x%x, c68=0x%x)\n",
+		 rtlphy->default_initialgain[0],
+		 rtlphy->default_initialgain[1],
+		 rtlphy->default_initialgain[2],
+		 rtlphy->default_initialgain[3]));
+
+	/* read framesync */
+	rtlphy->framesync = rtl_get_bbreg(hw, ROFDM0_RXDETECTOR3, MASKBYTE0);
+	rtlphy->framesync_c34 = rtl_get_bbreg(hw, ROFDM0_RXDETECTOR2,
+					      MASKDWORD);
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+		 ("Default framesync (0x%x) = 0x%x\n",
+		 ROFDM0_RXDETECTOR3, rtlphy->framesync));
+
+}
+
+static void _rtl92s_phy_get_txpower_index(struct ieee80211_hw *hw, u8 channel,
+					  u8 *cckpowerlevel, u8 *ofdmpowerLevel)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 index = (channel - 1);
+
+	/* 1. CCK */
+	/* RF-A */
+	cckpowerlevel[0] = rtlefuse->txpwrlevel_cck[0][index];
+	/* RF-B */
+	cckpowerlevel[1] = rtlefuse->txpwrlevel_cck[1][index];
+
+	/* 2. OFDM for 1T or 2T */
+	if (rtlphy->rf_type == RF_1T2R || rtlphy->rf_type == RF_1T1R) {
+		/* Read HT 40 OFDM TX power */
+		ofdmpowerLevel[0] = rtlefuse->txpwrlevel_ht40_1s[0][index];
+		ofdmpowerLevel[1] = rtlefuse->txpwrlevel_ht40_1s[1][index];
+	} else if (rtlphy->rf_type == RF_2T2R) {
+		/* Read HT 40 OFDM TX power */
+		ofdmpowerLevel[0] = rtlefuse->txpwrlevel_ht40_2s[0][index];
+		ofdmpowerLevel[1] = rtlefuse->txpwrlevel_ht40_2s[1][index];
+	}
+}
+
+static void _rtl92s_phy_ccxpower_indexcheck(struct ieee80211_hw *hw,
+		u8 channel, u8 *cckpowerlevel, u8 *ofdmpowerlevel)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	rtlphy->cur_cck_txpwridx = cckpowerlevel[0];
+	rtlphy->cur_ofdm24g_txpwridx = ofdmpowerlevel[0];
+}
+
+void rtl92s_phy_set_txpower(struct ieee80211_hw *hw, u8	channel)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	/* [0]:RF-A, [1]:RF-B */
+	u8 cckpowerlevel[2], ofdmpowerLevel[2];
+
+	if (rtlefuse->txpwr_fromeprom == false)
+		return;
+
+	/* Mainly we use RF-A Tx Power to write the Tx Power registers,
+	 * but the RF-B Tx Power must be calculated by the antenna diff.
+	 * So we have to rewrite Antenna gain offset register here.
+	 * Please refer to BB register 0x80c
+	 * 1. For CCK.
+	 * 2. For OFDM 1T or 2T */
+	_rtl92s_phy_get_txpower_index(hw, channel, &cckpowerlevel[0],
+			&ofdmpowerLevel[0]);
+
+	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+			("Channel-%d, cckPowerLevel (A / B) = "
+			"0x%x / 0x%x,   ofdmPowerLevel (A / B) = 0x%x / 0x%x\n",
+			channel, cckpowerlevel[0], cckpowerlevel[1],
+			ofdmpowerLevel[0], ofdmpowerLevel[1]));
+
+	_rtl92s_phy_ccxpower_indexcheck(hw, channel, &cckpowerlevel[0],
+			&ofdmpowerLevel[0]);
+
+	rtl92s_phy_rf6052_set_ccktxpower(hw, cckpowerlevel[0]);
+	rtl92s_phy_rf6052_set_ofdmtxpower(hw, &ofdmpowerLevel[0], channel);
+
+}
+
+void rtl92s_phy_chk_fwcmd_iodone(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u16 pollingcnt = 10000;
+	u32 tmpvalue;
+
+	/* Make sure that CMD IO has be accepted by FW. */
+	do {
+		udelay(10);
+
+		tmpvalue = rtl_read_dword(rtlpriv, WFM5);
+		if (tmpvalue == 0)
+			break;
+	} while (--pollingcnt);
+
+	if (pollingcnt == 0)
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("Set FW Cmd fail!!\n"));
+}
+
+
+static void _rtl92s_phy_set_fwcmd_io(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u32 input, current_aid = 0;
+
+	if (is_hal_stop(rtlhal))
+		return;
+
+	/* We re-map RA related CMD IO to combinational ones */
+	/* if FW version is v.52 or later. */
+	switch (rtlhal->current_fwcmd_io) {
+	case FW_CMD_RA_REFRESH_N:
+		rtlhal->current_fwcmd_io = FW_CMD_RA_REFRESH_N_COMB;
+		break;
+	case FW_CMD_RA_REFRESH_BG:
+		rtlhal->current_fwcmd_io = FW_CMD_RA_REFRESH_BG_COMB;
+		break;
+	default:
+		break;
+	}
+
+	switch (rtlhal->current_fwcmd_io) {
+	case FW_CMD_RA_RESET:
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+			 ("FW_CMD_RA_RESET\n"));
+		rtl_write_dword(rtlpriv, WFM5, FW_RA_RESET);
+		rtl92s_phy_chk_fwcmd_iodone(hw);
+		break;
+	case FW_CMD_RA_ACTIVE:
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+			 ("FW_CMD_RA_ACTIVE\n"));
+		rtl_write_dword(rtlpriv, WFM5, FW_RA_ACTIVE);
+		rtl92s_phy_chk_fwcmd_iodone(hw);
+		break;
+	case FW_CMD_RA_REFRESH_N:
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+			 ("FW_CMD_RA_REFRESH_N\n"));
+		input = FW_RA_REFRESH;
+		rtl_write_dword(rtlpriv, WFM5, input);
+		rtl92s_phy_chk_fwcmd_iodone(hw);
+		rtl_write_dword(rtlpriv, WFM5, FW_RA_ENABLE_RSSI_MASK);
+		rtl92s_phy_chk_fwcmd_iodone(hw);
+		break;
+	case FW_CMD_RA_REFRESH_BG:
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+			 ("FW_CMD_RA_REFRESH_BG\n"));
+		rtl_write_dword(rtlpriv, WFM5, FW_RA_REFRESH);
+		rtl92s_phy_chk_fwcmd_iodone(hw);
+		rtl_write_dword(rtlpriv, WFM5, FW_RA_DISABLE_RSSI_MASK);
+		rtl92s_phy_chk_fwcmd_iodone(hw);
+		break;
+	case FW_CMD_RA_REFRESH_N_COMB:
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+			 ("FW_CMD_RA_REFRESH_N_COMB\n"));
+		input = FW_RA_IOT_N_COMB;
+		rtl_write_dword(rtlpriv, WFM5, input);
+		rtl92s_phy_chk_fwcmd_iodone(hw);
+		break;
+	case FW_CMD_RA_REFRESH_BG_COMB:
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+			 ("FW_CMD_RA_REFRESH_BG_COMB\n"));
+		input = FW_RA_IOT_BG_COMB;
+		rtl_write_dword(rtlpriv, WFM5, input);
+		rtl92s_phy_chk_fwcmd_iodone(hw);
+		break;
+	case FW_CMD_IQK_ENABLE:
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+			 ("FW_CMD_IQK_ENABLE\n"));
+		rtl_write_dword(rtlpriv, WFM5, FW_IQK_ENABLE);
+		rtl92s_phy_chk_fwcmd_iodone(hw);
+		break;
+	case FW_CMD_PAUSE_DM_BY_SCAN:
+		/* Lower initial gain */
+		rtl_set_bbreg(hw, ROFDM0_XAAGCCORE1, MASKBYTE0, 0x17);
+		rtl_set_bbreg(hw, ROFDM0_XBAGCCORE1, MASKBYTE0, 0x17);
+		/* CCA threshold */
+		rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0x40);
+		break;
+	case FW_CMD_RESUME_DM_BY_SCAN:
+		/* CCA threshold */
+		rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0xcd);
+		rtl92s_phy_set_txpower(hw, rtlphy->current_channel);
+		break;
+	case FW_CMD_HIGH_PWR_DISABLE:
+		if (rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE)
+			break;
+
+		/* Lower initial gain */
+		rtl_set_bbreg(hw, ROFDM0_XAAGCCORE1, MASKBYTE0, 0x17);
+		rtl_set_bbreg(hw, ROFDM0_XBAGCCORE1, MASKBYTE0, 0x17);
+		/* CCA threshold */
+		rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0x40);
+		break;
+	case FW_CMD_HIGH_PWR_ENABLE:
+		if ((rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) ||
+			(rtlpriv->dm.dynamic_txpower_enable == true))
+			break;
+
+		/* CCA threshold */
+		rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0xcd);
+		break;
+	case FW_CMD_LPS_ENTER:
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+			 ("FW_CMD_LPS_ENTER\n"));
+		current_aid = rtlpriv->mac80211.assoc_id;
+		rtl_write_dword(rtlpriv, WFM5, (FW_LPS_ENTER |
+				((current_aid | 0xc000) << 8)));
+		rtl92s_phy_chk_fwcmd_iodone(hw);
+		/* FW set TXOP disable here, so disable EDCA
+		 * turbo mode until driver leave LPS */
+		break;
+	case FW_CMD_LPS_LEAVE:
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+			 ("FW_CMD_LPS_LEAVE\n"));
+		rtl_write_dword(rtlpriv, WFM5, FW_LPS_LEAVE);
+		rtl92s_phy_chk_fwcmd_iodone(hw);
+		break;
+	case FW_CMD_ADD_A2_ENTRY:
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+			 ("FW_CMD_ADD_A2_ENTRY\n"));
+		rtl_write_dword(rtlpriv, WFM5, FW_ADD_A2_ENTRY);
+		rtl92s_phy_chk_fwcmd_iodone(hw);
+		break;
+	case FW_CMD_CTRL_DM_BY_DRIVER:
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+			 ("FW_CMD_CTRL_DM_BY_DRIVER\n"));
+		rtl_write_dword(rtlpriv, WFM5, FW_CTRL_DM_BY_DRIVER);
+		rtl92s_phy_chk_fwcmd_iodone(hw);
+		break;
+
+	default:
+		break;
+	}
+
+	rtl92s_phy_chk_fwcmd_iodone(hw);
+
+	/* Clear FW CMD operation flag. */
+	rtlhal->set_fwcmd_inprogress = false;
+}
+
+bool rtl92s_phy_set_fw_cmd(struct ieee80211_hw *hw, enum fwcmd_iotype fw_cmdio)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u32	fw_param = FW_CMD_IO_PARA_QUERY(rtlpriv);
+	u16	fw_cmdmap = FW_CMD_IO_QUERY(rtlpriv);
+	bool bPostProcessing = false;
+
+	RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+			("Set FW Cmd(%#x), set_fwcmd_inprogress(%d)\n",
+			fw_cmdio, rtlhal->set_fwcmd_inprogress));
+
+	do {
+		/* We re-map to combined FW CMD ones if firmware version */
+		/* is v.53 or later. */
+		switch (fw_cmdio) {
+		case FW_CMD_RA_REFRESH_N:
+			fw_cmdio = FW_CMD_RA_REFRESH_N_COMB;
+			break;
+		case FW_CMD_RA_REFRESH_BG:
+			fw_cmdio = FW_CMD_RA_REFRESH_BG_COMB;
+			break;
+		default:
+			break;
+		}
+
+		/* If firmware version is v.62 or later,
+		 * use FW_CMD_IO_SET for FW_CMD_CTRL_DM_BY_DRIVER */
+		if (hal_get_firmwareversion(rtlpriv) >= 0x3E) {
+			if (fw_cmdio == FW_CMD_CTRL_DM_BY_DRIVER)
+				fw_cmdio = FW_CMD_CTRL_DM_BY_DRIVER_NEW;
+		}
+
+
+		/* We shall revise all FW Cmd IO into Reg0x364
+		 * DM map table in the future. */
+		switch (fw_cmdio) {
+		case FW_CMD_RA_INIT:
+			RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, ("RA init!!\n"));
+			fw_cmdmap |= FW_RA_INIT_CTL;
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+			/* Clear control flag to sync with FW. */
+			FW_CMD_IO_CLR(rtlpriv, FW_RA_INIT_CTL);
+			break;
+		case FW_CMD_DIG_DISABLE:
+			RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+				 ("Set DIG disable!!\n"));
+			fw_cmdmap &= ~FW_DIG_ENABLE_CTL;
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+			break;
+		case FW_CMD_DIG_ENABLE:
+		case FW_CMD_DIG_RESUME:
+			if (!(rtlpriv->dm.dm_flag & HAL_DM_DIG_DISABLE)) {
+				RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+					("Set DIG enable or resume!!\n"));
+				fw_cmdmap |= (FW_DIG_ENABLE_CTL | FW_SS_CTL);
+				FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+			}
+			break;
+		case FW_CMD_DIG_HALT:
+			RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+				 ("Set DIG halt!!\n"));
+			fw_cmdmap &= ~(FW_DIG_ENABLE_CTL | FW_SS_CTL);
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+			break;
+		case FW_CMD_TXPWR_TRACK_THERMAL: {
+			u8	thermalval = 0;
+			fw_cmdmap |= FW_PWR_TRK_CTL;
+
+			/* Clear FW parameter in terms of thermal parts. */
+			fw_param &= FW_PWR_TRK_PARAM_CLR;
+
+			thermalval = rtlpriv->dm.thermalvalue;
+			fw_param |= ((thermalval << 24) |
+				     (rtlefuse->thermalmeter[0] << 16));
+
+			RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+				 ("Set TxPwr tracking!! "
+				 "FwCmdMap(%#x), FwParam(%#x)\n",
+				 fw_cmdmap, fw_param));
+
+			FW_CMD_PARA_SET(rtlpriv, fw_param);
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+
+			/* Clear control flag to sync with FW. */
+			FW_CMD_IO_CLR(rtlpriv, FW_PWR_TRK_CTL);
+			}
+			break;
+		/* The following FW CMDs are only compatible to
+		 * v.53 or later. */
+		case FW_CMD_RA_REFRESH_N_COMB:
+			fw_cmdmap |= FW_RA_N_CTL;
+
+			/* Clear RA BG mode control. */
+			fw_cmdmap &= ~(FW_RA_BG_CTL | FW_RA_INIT_CTL);
+
+			/* Clear FW parameter in terms of RA parts. */
+			fw_param &= FW_RA_PARAM_CLR;
+
+			RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+				 ("[FW CMD] [New Version] "
+				 "Set RA/IOT Comb in n mode!! FwCmdMap(%#x), "
+				 "FwParam(%#x)\n", fw_cmdmap, fw_param));
+
+			FW_CMD_PARA_SET(rtlpriv, fw_param);
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+
+			/* Clear control flag to sync with FW. */
+			FW_CMD_IO_CLR(rtlpriv, FW_RA_N_CTL);
+			break;
+		case FW_CMD_RA_REFRESH_BG_COMB:
+			fw_cmdmap |= FW_RA_BG_CTL;
+
+			/* Clear RA n-mode control. */
+			fw_cmdmap &= ~(FW_RA_N_CTL | FW_RA_INIT_CTL);
+			/* Clear FW parameter in terms of RA parts. */
+			fw_param &= FW_RA_PARAM_CLR;
+
+			FW_CMD_PARA_SET(rtlpriv, fw_param);
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+
+			/* Clear control flag to sync with FW. */
+			FW_CMD_IO_CLR(rtlpriv, FW_RA_BG_CTL);
+			break;
+		case FW_CMD_IQK_ENABLE:
+			fw_cmdmap |= FW_IQK_CTL;
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+			/* Clear control flag to sync with FW. */
+			FW_CMD_IO_CLR(rtlpriv, FW_IQK_CTL);
+			break;
+		/* The following FW CMD is compatible to v.62 or later.  */
+		case FW_CMD_CTRL_DM_BY_DRIVER_NEW:
+			fw_cmdmap |= FW_DRIVER_CTRL_DM_CTL;
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+			break;
+		/*  The followed FW Cmds needs post-processing later. */
+		case FW_CMD_RESUME_DM_BY_SCAN:
+			fw_cmdmap |= (FW_DIG_ENABLE_CTL |
+				      FW_HIGH_PWR_ENABLE_CTL |
+				      FW_SS_CTL);
+
+			if (rtlpriv->dm.dm_flag & HAL_DM_DIG_DISABLE ||
+				!digtable.dig_enable_flag)
+				fw_cmdmap &= ~FW_DIG_ENABLE_CTL;
+
+			if ((rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) ||
+			    (rtlpriv->dm.dynamic_txpower_enable == true))
+				fw_cmdmap &= ~FW_HIGH_PWR_ENABLE_CTL;
+
+			if ((digtable.dig_ext_port_stage ==
+			    DIG_EXT_PORT_STAGE_0) ||
+			    (digtable.dig_ext_port_stage ==
+			    DIG_EXT_PORT_STAGE_1))
+				fw_cmdmap &= ~FW_DIG_ENABLE_CTL;
+
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+			bPostProcessing = true;
+			break;
+		case FW_CMD_PAUSE_DM_BY_SCAN:
+			fw_cmdmap &= ~(FW_DIG_ENABLE_CTL |
+				       FW_HIGH_PWR_ENABLE_CTL |
+				       FW_SS_CTL);
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+			bPostProcessing = true;
+			break;
+		case FW_CMD_HIGH_PWR_DISABLE:
+			fw_cmdmap &= ~FW_HIGH_PWR_ENABLE_CTL;
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+			bPostProcessing = true;
+			break;
+		case FW_CMD_HIGH_PWR_ENABLE:
+			if (!(rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) &&
+				(rtlpriv->dm.dynamic_txpower_enable != true)) {
+				fw_cmdmap |= (FW_HIGH_PWR_ENABLE_CTL |
+					      FW_SS_CTL);
+				FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+				bPostProcessing = true;
+			}
+			break;
+		case FW_CMD_DIG_MODE_FA:
+			fw_cmdmap |= FW_FA_CTL;
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+			break;
+		case FW_CMD_DIG_MODE_SS:
+			fw_cmdmap &= ~FW_FA_CTL;
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+			break;
+		case FW_CMD_PAPE_CONTROL:
+			RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+				 ("[FW CMD] Set PAPE Control\n"));
+			fw_cmdmap &= ~FW_PAPE_CTL_BY_SW_HW;
+
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+			break;
+		default:
+			/* Pass to original FW CMD processing callback
+			 * routine. */
+			bPostProcessing = true;
+			break;
+		}
+	} while (false);
+
+	/* We shall post processing these FW CMD if
+	 * variable bPostProcessing is set. */
+	if (bPostProcessing && !rtlhal->set_fwcmd_inprogress) {
+		rtlhal->set_fwcmd_inprogress = true;
+		/* Update current FW Cmd for callback use. */
+		rtlhal->current_fwcmd_io = fw_cmdio;
+	} else {
+		return false;
+	}
+
+	_rtl92s_phy_set_fwcmd_io(hw);
+	return true;
+}
+
+static	void _rtl92s_phy_check_ephy_switchready(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32	delay = 100;
+	u8	regu1;
+
+	regu1 = rtl_read_byte(rtlpriv, 0x554);
+	while ((regu1 & BIT(5)) && (delay > 0)) {
+		regu1 = rtl_read_byte(rtlpriv, 0x554);
+		delay--;
+		/* We delay only 50us to prevent
+		 * being scheduled out. */
+		udelay(50);
+	}
+}
+
+void rtl92s_phy_switch_ephy_parameter(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+	/* The way to be capable to switch clock request
+	 * when the PG setting does not support clock request.
+	 * This is the backdoor solution to switch clock
+	 * request before ASPM or D3. */
+	rtl_write_dword(rtlpriv, 0x540, 0x73c11);
+	rtl_write_dword(rtlpriv, 0x548, 0x2407c);
+
+	/* Switch EPHY parameter!!!! */
+	rtl_write_word(rtlpriv, 0x550, 0x1000);
+	rtl_write_byte(rtlpriv, 0x554, 0x20);
+	_rtl92s_phy_check_ephy_switchready(hw);
+
+	rtl_write_word(rtlpriv, 0x550, 0xa0eb);
+	rtl_write_byte(rtlpriv, 0x554, 0x3e);
+	_rtl92s_phy_check_ephy_switchready(hw);
+
+	rtl_write_word(rtlpriv, 0x550, 0xff80);
+	rtl_write_byte(rtlpriv, 0x554, 0x39);
+	_rtl92s_phy_check_ephy_switchready(hw);
+
+	/* Delay L1 enter time */
+	if (ppsc->support_aspm && !ppsc->support_backdoor)
+		rtl_write_byte(rtlpriv, 0x560, 0x40);
+	else
+		rtl_write_byte(rtlpriv, 0x560, 0x00);
+
+}
+
+void rtl92s_phy_set_beacon_hwreg(struct ieee80211_hw *hw, u16 BeaconInterval)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	rtl_write_dword(rtlpriv, WFM5, 0xF1000000 | (BeaconInterval << 8));
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/phy.h b/drivers/net/wireless/rtlwifi/rtl8192se/phy.h
new file mode 100644
index 00000000000..37e504af644
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/phy.h
@@ -0,0 +1,101 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+#ifndef __RTL92S_PHY_H__
+#define __RTL92S_PHY_H__
+
+#define MAX_TXPWR_IDX_NMODE_92S		63
+#define MAX_DOZE_WAITING_TIMES_9x	64
+
+/* Channel switch:The size of
+ * command tables for switch channel */
+#define MAX_PRECMD_CNT			16
+#define MAX_RFDEPENDCMD_CNT		16
+#define MAX_POSTCMD_CNT			16
+
+#define RF90_PATH_MAX			4
+
+enum version_8192s {
+	VERSION_8192S_ACUT,
+	VERSION_8192S_BCUT,
+	VERSION_8192S_CCUT
+};
+
+enum swchnlcmd_id {
+	CMDID_END,
+	CMDID_SET_TXPOWEROWER_LEVEL,
+	CMDID_BBREGWRITE10,
+	CMDID_WRITEPORT_ULONG,
+	CMDID_WRITEPORT_USHORT,
+	CMDID_WRITEPORT_UCHAR,
+	CMDID_RF_WRITEREG,
+};
+
+struct swchnlcmd {
+	enum swchnlcmd_id cmdid;
+	u32 para1;
+	u32 para2;
+	u32 msdelay;
+};
+
+enum baseband_config_type {
+	/* Radio Path A */
+	BASEBAND_CONFIG_PHY_REG = 0,
+	/* Radio Path B */
+	BASEBAND_CONFIG_AGC_TAB = 1,
+};
+
+#define hal_get_firmwareversion(rtlpriv) \
+	(((struct rt_firmware *)(rtlpriv->rtlhal.pfirmware))->firmwareversion)
+
+u32 rtl92s_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask);
+void rtl92s_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask,
+			   u32 data);
+void rtl92s_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation);
+u32 rtl92s_phy_query_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
+			    u32 regaddr, u32 bitmask);
+void rtl92s_phy_set_rf_reg(struct ieee80211_hw *hw,	enum radio_path rfpath,
+			   u32 regaddr, u32 bitmask, u32 data);
+void rtl92s_phy_set_bw_mode(struct ieee80211_hw *hw,
+			    enum nl80211_channel_type ch_type);
+u8 rtl92s_phy_sw_chnl(struct ieee80211_hw *hw);
+bool rtl92s_phy_set_rf_power_state(struct ieee80211_hw *hw,
+				   enum rf_pwrstate rfpower_state);
+bool rtl92s_phy_mac_config(struct ieee80211_hw *hw);
+void rtl92s_phy_switch_ephy_parameter(struct ieee80211_hw *hw);
+bool rtl92s_phy_bb_config(struct ieee80211_hw *hw);
+bool rtl92s_phy_rf_config(struct ieee80211_hw *hw);
+void rtl92s_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw);
+void rtl92s_phy_set_txpower(struct ieee80211_hw *hw, u8	channel);
+bool rtl92s_phy_set_fw_cmd(struct ieee80211_hw *hw, enum fwcmd_iotype fwcmd_io);
+void rtl92s_phy_chk_fwcmd_iodone(struct ieee80211_hw *hw);
+void rtl92s_phy_set_beacon_hwreg(struct ieee80211_hw *hw, u16 beaconinterval);
+u8 rtl92s_phy_config_rf(struct ieee80211_hw *hw, enum radio_path rfpath) ;
+
+#endif
+
-- 
cgit v1.2.3


From cf76bbf7c0d0315ec17c950d14de939a81465f6b Mon Sep 17 00:00:00 2001
From: Chaoming Li <chaoming_li@realsil.com.cn>
Date: Tue, 3 May 2011 09:48:45 -0500
Subject: rtlwifi: rtl8192se: Merge register definitions

Merge routines reg.h for RTL8192SE.

Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8192se/reg.h | 1188 ++++++++++++++++++++++++++
 1 file changed, 1188 insertions(+)
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8192se/reg.h

diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/reg.h b/drivers/net/wireless/rtlwifi/rtl8192se/reg.h
new file mode 100644
index 00000000000..0116eaddbfa
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/reg.h
@@ -0,0 +1,1188 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+#ifndef __REALTEK_92S_REG_H__
+#define __REALTEK_92S_REG_H__
+
+/* 1. System Configuration Registers  */
+#define	REG_SYS_ISO_CTRL			0x0000
+#define	REG_SYS_FUNC_EN				0x0002
+#define	PMC_FSM					0x0004
+#define	SYS_CLKR				0x0008
+#define	EPROM_CMD				0x000A
+#define	EE_VPD					0x000C
+#define	AFE_MISC				0x0010
+#define	SPS0_CTRL				0x0011
+#define	SPS1_CTRL				0x0018
+#define	RF_CTRL					0x001F
+#define	LDOA15_CTRL				0x0020
+#define	LDOV12D_CTRL				0x0021
+#define	LDOHCI12_CTRL				0x0022
+#define	LDO_USB_SDIO				0x0023
+#define	LPLDO_CTRL				0x0024
+#define	AFE_XTAL_CTRL				0x0026
+#define	AFE_PLL_CTRL				0x0028
+#define	REG_EFUSE_CTRL				0x0030
+#define	REG_EFUSE_TEST				0x0034
+#define	PWR_DATA				0x0038
+#define	DBG_PORT				0x003A
+#define	DPS_TIMER				0x003C
+#define	RCLK_MON				0x003E
+
+/* 2. Command Control Registers	  */
+#define	CMDR					0x0040
+#define	TXPAUSE					0x0042
+#define	LBKMD_SEL				0x0043
+#define	TCR					0x0044
+#define	RCR					0x0048
+#define	MSR					0x004C
+#define	SYSF_CFG				0x004D
+#define	RX_PKY_LIMIT				0x004E
+#define	MBIDCTRL				0x004F
+
+/* 3. MACID Setting Registers	 */
+#define	MACIDR					0x0050
+#define	MACIDR0					0x0050
+#define	MACIDR4					0x0054
+#define	BSSIDR					0x0058
+#define	HWVID					0x005E
+#define	MAR					0x0060
+#define	MBIDCAMCONTENT				0x0068
+#define	MBIDCAMCFG				0x0070
+#define	BUILDTIME				0x0074
+#define	BUILDUSER				0x0078
+
+#define	IDR0					MACIDR0
+#define	IDR4					MACIDR4
+
+/* 4. Timing Control Registers	 */
+#define	TSFR					0x0080
+#define	SLOT_TIME				0x0089
+#define	USTIME					0x008A
+#define	SIFS_CCK				0x008C
+#define	SIFS_OFDM				0x008E
+#define	PIFS_TIME				0x0090
+#define	ACK_TIMEOUT				0x0091
+#define	EIFSTR					0x0092
+#define	BCN_INTERVAL				0x0094
+#define	ATIMWND					0x0096
+#define	BCN_DRV_EARLY_INT			0x0098
+#define	BCN_DMATIME				0x009A
+#define	BCN_ERR_THRESH				0x009C
+#define	MLT					0x009D
+#define	RSVD_MAC_TUNE_US			0x009E
+
+/* 5. FIFO Control Registers	  */
+#define RQPN					0x00A0
+#define	RQPN1					0x00A0
+#define	RQPN2					0x00A1
+#define	RQPN3					0x00A2
+#define	RQPN4					0x00A3
+#define	RQPN5					0x00A4
+#define	RQPN6					0x00A5
+#define	RQPN7					0x00A6
+#define	RQPN8					0x00A7
+#define	RQPN9					0x00A8
+#define	RQPN10					0x00A9
+#define	LD_RQPN					0x00AB
+#define	RXFF_BNDY				0x00AC
+#define	RXRPT_BNDY				0x00B0
+#define	TXPKTBUF_PGBNDY				0x00B4
+#define	PBP					0x00B5
+#define	RXDRVINFO_SZ				0x00B6
+#define	TXFF_STATUS				0x00B7
+#define	RXFF_STATUS				0x00B8
+#define	TXFF_EMPTY_TH				0x00B9
+#define	SDIO_RX_BLKSZ				0x00BC
+#define	RXDMA					0x00BD
+#define	RXPKT_NUM				0x00BE
+#define	C2HCMD_UDT_SIZE				0x00C0
+#define	C2HCMD_UDT_ADDR				0x00C2
+#define	FIFOPAGE1				0x00C4
+#define	FIFOPAGE2				0x00C8
+#define	FIFOPAGE3				0x00CC
+#define	FIFOPAGE4				0x00D0
+#define	FIFOPAGE5				0x00D4
+#define	FW_RSVD_PG_CRTL				0x00D8
+#define	RXDMA_AGG_PG_TH				0x00D9
+#define	TXDESC_MSK				0x00DC
+#define	TXRPTFF_RDPTR				0x00E0
+#define	TXRPTFF_WTPTR				0x00E4
+#define	C2HFF_RDPTR				0x00E8
+#define	C2HFF_WTPTR				0x00EC
+#define	RXFF0_RDPTR				0x00F0
+#define	RXFF0_WTPTR				0x00F4
+#define	RXFF1_RDPTR				0x00F8
+#define	RXFF1_WTPTR				0x00FC
+#define	RXRPT0_RDPTR				0x0100
+#define	RXRPT0_WTPTR				0x0104
+#define	RXRPT1_RDPTR				0x0108
+#define	RXRPT1_WTPTR				0x010C
+#define	RX0_UDT_SIZE				0x0110
+#define	RX1PKTNUM				0x0114
+#define	RXFILTERMAP				0x0116
+#define	RXFILTERMAP_GP1				0x0118
+#define	RXFILTERMAP_GP2				0x011A
+#define	RXFILTERMAP_GP3				0x011C
+#define	BCNQ_CTRL				0x0120
+#define	MGTQ_CTRL				0x0124
+#define	HIQ_CTRL				0x0128
+#define	VOTID7_CTRL				0x012c
+#define	VOTID6_CTRL				0x0130
+#define	VITID5_CTRL				0x0134
+#define	VITID4_CTRL				0x0138
+#define	BETID3_CTRL				0x013c
+#define	BETID0_CTRL				0x0140
+#define	BKTID2_CTRL				0x0144
+#define	BKTID1_CTRL				0x0148
+#define	CMDQ_CTRL				0x014c
+#define	TXPKT_NUM_CTRL				0x0150
+#define	TXQ_PGADD				0x0152
+#define	TXFF_PG_NUM				0x0154
+#define	TRXDMA_STATUS				0x0156
+
+/* 6. Adaptive Control Registers   */
+#define	INIMCS_SEL				0x0160
+#define	TX_RATE_REG				INIMCS_SEL
+#define	INIRTSMCS_SEL				0x0180
+#define	RRSR					0x0181
+#define	ARFR0					0x0184
+#define	ARFR1					0x0188
+#define	ARFR2					0x018C
+#define	ARFR3					0x0190
+#define	ARFR4					0x0194
+#define	ARFR5					0x0198
+#define	ARFR6					0x019C
+#define	ARFR7					0x01A0
+#define	AGGLEN_LMT_H				0x01A7
+#define	AGGLEN_LMT_L				0x01A8
+#define	DARFRC					0x01B0
+#define	RARFRC					0x01B8
+#define	MCS_TXAGC				0x01C0
+#define	CCK_TXAGC				0x01C8
+
+/* 7. EDCA Setting Registers */
+#define	EDCAPARA_VO				0x01D0
+#define	EDCAPARA_VI				0x01D4
+#define	EDCAPARA_BE				0x01D8
+#define	EDCAPARA_BK				0x01DC
+#define	BCNTCFG					0x01E0
+#define	CWRR					0x01E2
+#define	ACMAVG					0x01E4
+#define	AcmHwCtrl				0x01E7
+#define	VO_ADMTM				0x01E8
+#define	VI_ADMTM				0x01EC
+#define	BE_ADMTM				0x01F0
+#define	RETRY_LIMIT				0x01F4
+#define	SG_RATE					0x01F6
+
+/* 8. WMAC, BA and CCX related Register. */
+#define	NAV_CTRL				0x0200
+#define	BW_OPMODE				0x0203
+#define	BACAMCMD				0x0204
+#define	BACAMCONTENT				0x0208
+
+/* the 0x2xx register WMAC definition */
+#define	LBDLY					0x0210
+#define	FWDLY					0x0211
+#define	HWPC_RX_CTRL				0x0218
+#define	MQIR					0x0220
+#define	MAIR					0x0222
+#define	MSIR					0x0224
+#define	CLM_RESULT				0x0227
+#define	NHM_RPI_CNT				0x0228
+#define	RXERR_RPT				0x0230
+#define	NAV_PROT_LEN				0x0234
+#define	CFEND_TH				0x0236
+#define	AMPDU_MIN_SPACE				0x0237
+#define	TXOP_STALL_CTRL				0x0238
+
+/* 9. Security Control Registers */
+#define	REG_RWCAM				0x0240
+#define	REG_WCAMI				0x0244
+#define	REG_RCAMO				0x0248
+#define	REG_CAMDBG				0x024C
+#define	REG_SECR				0x0250
+
+/* 10. Power Save Control Registers */
+#define	WOW_CTRL				0x0260
+#define	PSSTATUS				0x0261
+#define	PSSWITCH				0x0262
+#define	MIMOPS_WAIT_PERIOD			0x0263
+#define	LPNAV_CTRL				0x0264
+#define	WFM0					0x0270
+#define	WFM1					0x0280
+#define	WFM2					0x0290
+#define	WFM3					0x02A0
+#define	WFM4					0x02B0
+#define	WFM5					0x02C0
+#define	WFCRC					0x02D0
+#define	FW_RPT_REG				0x02c4
+
+/* 11. General Purpose Registers */
+#define	PSTIME					0x02E0
+#define	TIMER0					0x02E4
+#define	TIMER1					0x02E8
+#define	GPIO_CTRL				0x02EC
+#define	GPIO_IN					0x02EC
+#define	GPIO_OUT				0x02ED
+#define	GPIO_IO_SEL				0x02EE
+#define	GPIO_MOD				0x02EF
+#define	GPIO_INTCTRL				0x02F0
+#define	MAC_PINMUX_CFG				0x02F1
+#define	LEDCFG					0x02F2
+#define	PHY_REG					0x02F3
+#define	PHY_REG_DATA				0x02F4
+#define	REG_EFUSE_CLK				0x02F8
+
+/* 12. Host Interrupt Status Registers */
+#define	INTA_MASK				0x0300
+#define	ISR					0x0308
+
+/* 13. Test Mode and Debug Control Registers */
+#define	DBG_PORT_SWITCH				0x003A
+#define	BIST					0x0310
+#define	DBS					0x0314
+#define	CPUINST					0x0318
+#define	CPUCAUSE				0x031C
+#define	LBUS_ERR_ADDR				0x0320
+#define	LBUS_ERR_CMD				0x0324
+#define	LBUS_ERR_DATA_L				0x0328
+#define	LBUS_ERR_DATA_H				0x032C
+#define	LX_EXCEPTION_ADDR			0x0330
+#define	WDG_CTRL				0x0334
+#define	INTMTU					0x0338
+#define	INTM					0x033A
+#define	FDLOCKTURN0				0x033C
+#define	FDLOCKTURN1				0x033D
+#define	TRXPKTBUF_DBG_DATA			0x0340
+#define	TRXPKTBUF_DBG_CTRL			0x0348
+#define	DPLL					0x034A
+#define	CBUS_ERR_ADDR				0x0350
+#define	CBUS_ERR_CMD				0x0354
+#define	CBUS_ERR_DATA_L				0x0358
+#define	CBUS_ERR_DATA_H				0x035C
+#define	USB_SIE_INTF_ADDR			0x0360
+#define	USB_SIE_INTF_WD				0x0361
+#define	USB_SIE_INTF_RD				0x0362
+#define	USB_SIE_INTF_CTRL			0x0363
+#define LBUS_MON_ADDR				0x0364
+#define LBUS_ADDR_MASK				0x0368
+
+/* Boundary is 0x37F */
+
+/* 14. PCIE config register */
+#define	TP_POLL					0x0500
+#define	PM_CTRL					0x0502
+#define	PCIF					0x0503
+
+#define	THPDA					0x0514
+#define	TMDA					0x0518
+#define	TCDA					0x051C
+#define	HDA					0x0520
+#define	TVODA					0x0524
+#define	TVIDA					0x0528
+#define	TBEDA					0x052C
+#define	TBKDA					0x0530
+#define	TBDA					0x0534
+#define	RCDA					0x0538
+#define	RDQDA					0x053C
+#define	DBI_WDATA				0x0540
+#define	DBI_RDATA				0x0544
+#define	DBI_CTRL				0x0548
+#define	MDIO_DATA				0x0550
+#define	MDIO_CTRL				0x0554
+#define	PCI_RPWM				0x0561
+#define	PCI_CPWM				0x0563
+
+/* Config register	(Offset 0x800-) */
+#define	PHY_CCA					0x803
+
+/* Min Spacing related settings. */
+#define	MAX_MSS_DENSITY_2T			0x13
+#define	MAX_MSS_DENSITY_1T			0x0A
+
+/* Rx DMA Control related settings */
+#define	RXDMA_AGG_EN				BIT(7)
+
+#define	RPWM					PCI_RPWM
+
+/* Regsiter Bit and Content definition  */
+
+#define	ISO_MD2PP				BIT(0)
+#define	ISO_PA2PCIE				BIT(3)
+#define	ISO_PLL2MD				BIT(4)
+#define	ISO_PWC_DV2RP				BIT(11)
+#define	ISO_PWC_RV2RP				BIT(12)
+
+
+#define	FEN_MREGEN				BIT(15)
+#define	FEN_DCORE				BIT(11)
+#define	FEN_CPUEN				BIT(10)
+
+#define	PAD_HWPD_IDN				BIT(22)
+
+#define	SYS_CLKSEL_80M				BIT(0)
+#define	SYS_PS_CLKSEL				BIT(1)
+#define	SYS_CPU_CLKSEL				BIT(2)
+#define	SYS_MAC_CLK_EN				BIT(11)
+#define	SYS_SWHW_SEL				BIT(14)
+#define	SYS_FWHW_SEL				BIT(15)
+
+#define	CmdEEPROM_En				BIT(5)
+#define	CmdEERPOMSEL				BIT(4)
+#define	Cmd9346CR_9356SEL			BIT(4)
+
+#define	AFE_MBEN				BIT(1)
+#define	AFE_BGEN				BIT(0)
+
+#define	SPS1_SWEN				BIT(1)
+#define	SPS1_LDEN				BIT(0)
+
+#define	RF_EN					BIT(0)
+#define	RF_RSTB					BIT(1)
+#define	RF_SDMRSTB				BIT(2)
+
+#define	LDA15_EN				BIT(0)
+
+#define	LDV12_EN				BIT(0)
+#define	LDV12_SDBY				BIT(1)
+
+#define	XTAL_GATE_AFE				BIT(10)
+
+#define	APLL_EN					BIT(0)
+
+#define	AFR_CardBEn				BIT(0)
+#define	AFR_CLKRUN_SEL				BIT(1)
+#define	AFR_FuncRegEn				BIT(2)
+
+#define	APSDOFF_STATUS				BIT(15)
+#define	APSDOFF					BIT(14)
+#define	BBRSTN					BIT(13)
+#define	BB_GLB_RSTN				BIT(12)
+#define	SCHEDULE_EN				BIT(10)
+#define	MACRXEN					BIT(9)
+#define	MACTXEN					BIT(8)
+#define	DDMA_EN					BIT(7)
+#define	FW2HW_EN				BIT(6)
+#define	RXDMA_EN				BIT(5)
+#define	TXDMA_EN				BIT(4)
+#define	HCI_RXDMA_EN				BIT(3)
+#define	HCI_TXDMA_EN				BIT(2)
+
+#define	StopHCCA				BIT(6)
+#define	StopHigh				BIT(5)
+#define	StopMgt					BIT(4)
+#define	StopVO					BIT(3)
+#define	StopVI					BIT(2)
+#define	StopBE					BIT(1)
+#define	StopBK					BIT(0)
+
+#define	LBK_NORMAL				0x00
+#define	LBK_MAC_LB				(BIT(0) | BIT(1) | BIT(3))
+#define	LBK_MAC_DLB				(BIT(0) | BIT(1))
+#define	LBK_DMA_LB				(BIT(0) | BIT(1) | BIT(2))
+
+#define	TCP_OFDL_EN				BIT(25)
+#define	HWPC_TX_EN				BIT(24)
+#define	TXDMAPRE2FULL				BIT(23)
+#define	DISCW					BIT(20)
+#define	TCRICV					BIT(19)
+#define	CfendForm				BIT(17)
+#define	TCRCRC					BIT(16)
+#define	FAKE_IMEM_EN				BIT(15)
+#define	TSFRST					BIT(9)
+#define	TSFEN					BIT(8)
+#define	FWALLRDY				(BIT(0) | BIT(1) | BIT(2) | \
+						BIT(3) | BIT(4) | BIT(5) | \
+						BIT(6) | BIT(7))
+#define	FWRDY					BIT(7)
+#define	BASECHG					BIT(6)
+#define	IMEM					BIT(5)
+#define	DMEM_CODE_DONE				BIT(4)
+#define	EXT_IMEM_CHK_RPT			BIT(3)
+#define	EXT_IMEM_CODE_DONE			BIT(2)
+#define	IMEM_CHK_RPT				BIT(1)
+#define	IMEM_CODE_DONE				BIT(0)
+#define	IMEM_CODE_DONE				BIT(0)
+#define	IMEM_CHK_RPT				BIT(1)
+#define	EMEM_CODE_DONE				BIT(2)
+#define	EMEM_CHK_RPT				BIT(3)
+#define	DMEM_CODE_DONE				BIT(4)
+#define	IMEM_RDY				BIT(5)
+#define	BASECHG					BIT(6)
+#define	FWRDY					BIT(7)
+#define	LOAD_FW_READY				(IMEM_CODE_DONE | \
+						IMEM_CHK_RPT | \
+						EMEM_CODE_DONE | \
+						EMEM_CHK_RPT | \
+						DMEM_CODE_DONE | \
+						IMEM_RDY | \
+						BASECHG | \
+						FWRDY)
+#define	TCR_TSFEN				BIT(8)
+#define	TCR_TSFRST				BIT(9)
+#define	TCR_FAKE_IMEM_EN			BIT(15)
+#define	TCR_CRC					BIT(16)
+#define	TCR_ICV					BIT(19)
+#define	TCR_DISCW				BIT(20)
+#define	TCR_HWPC_TX_EN				BIT(24)
+#define	TCR_TCP_OFDL_EN				BIT(25)
+#define	TXDMA_INIT_VALUE			(IMEM_CHK_RPT | \
+						EXT_IMEM_CHK_RPT)
+
+#define	RCR_APPFCS				BIT(31)
+#define	RCR_DIS_ENC_2BYTE			BIT(30)
+#define	RCR_DIS_AES_2BYTE			BIT(29)
+#define	RCR_HTC_LOC_CTRL			BIT(28)
+#define	RCR_ENMBID				BIT(27)
+#define	RCR_RX_TCPOFDL_EN			BIT(26)
+#define	RCR_APP_PHYST_RXFF			BIT(25)
+#define	RCR_APP_PHYST_STAFF			BIT(24)
+#define	RCR_CBSSID				BIT(23)
+#define	RCR_APWRMGT				BIT(22)
+#define	RCR_ADD3				BIT(21)
+#define	RCR_AMF					BIT(20)
+#define	RCR_ACF					BIT(19)
+#define	RCR_ADF					BIT(18)
+#define	RCR_APP_MIC				BIT(17)
+#define	RCR_APP_ICV				BIT(16)
+#define	RCR_RXFTH				BIT(13)
+#define	RCR_AICV				BIT(12)
+#define	RCR_RXDESC_LK_EN			BIT(11)
+#define	RCR_APP_BA_SSN				BIT(6)
+#define	RCR_ACRC32				BIT(5)
+#define	RCR_RXSHFT_EN				BIT(4)
+#define	RCR_AB					BIT(3)
+#define	RCR_AM					BIT(2)
+#define	RCR_APM					BIT(1)
+#define	RCR_AAP					BIT(0)
+#define	RCR_MXDMA_OFFSET			8
+#define	RCR_FIFO_OFFSET				13
+
+
+#define MSR_LINK_MASK				((1 << 0) | (1 << 1))
+#define MSR_LINK_MANAGED			2
+#define MSR_LINK_NONE				0
+#define MSR_LINK_SHIFT				0
+#define MSR_LINK_ADHOC				1
+#define MSR_LINK_MASTER				3
+#define	MSR_NOLINK				0x00
+#define	MSR_ADHOC				0x01
+#define	MSR_INFRA				0x02
+#define	MSR_AP					0x03
+
+#define	ENUART					BIT(7)
+#define	ENJTAG					BIT(3)
+#define	BTMODE					(BIT(2) | BIT(1))
+#define	ENBT					BIT(0)
+
+#define	ENMBID					BIT(7)
+#define	BCNUM					(BIT(6) | BIT(5) | BIT(4))
+
+#define	USTIME_EDCA				0xFF00
+#define	USTIME_TSF				0x00FF
+
+#define	SIFS_TRX				0xFF00
+#define	SIFS_CTX				0x00FF
+
+#define	ENSWBCN					BIT(15)
+#define	DRVERLY_TU				0x0FF0
+#define	DRVERLY_US				0x000F
+#define	BCN_TCFG_CW_SHIFT			8
+#define	BCN_TCFG_IFS				0
+
+#define	RRSR_RSC_OFFSET				21
+#define	RRSR_SHORT_OFFSET			23
+#define	RRSR_RSC_BW_40M				0x600000
+#define	RRSR_RSC_UPSUBCHNL			0x400000
+#define	RRSR_RSC_LOWSUBCHNL			0x200000
+#define	RRSR_SHORT				0x800000
+#define	RRSR_1M					BIT(0)
+#define	RRSR_2M					BIT(1)
+#define	RRSR_5_5M				BIT(2)
+#define	RRSR_11M				BIT(3)
+#define	RRSR_6M					BIT(4)
+#define	RRSR_9M					BIT(5)
+#define	RRSR_12M				BIT(6)
+#define	RRSR_18M				BIT(7)
+#define	RRSR_24M				BIT(8)
+#define	RRSR_36M				BIT(9)
+#define	RRSR_48M				BIT(10)
+#define	RRSR_54M				BIT(11)
+#define	RRSR_MCS0				BIT(12)
+#define	RRSR_MCS1				BIT(13)
+#define	RRSR_MCS2				BIT(14)
+#define	RRSR_MCS3				BIT(15)
+#define	RRSR_MCS4				BIT(16)
+#define	RRSR_MCS5				BIT(17)
+#define	RRSR_MCS6				BIT(18)
+#define	RRSR_MCS7				BIT(19)
+#define	BRSR_AckShortPmb			BIT(23)
+
+#define	RATR_1M					0x00000001
+#define	RATR_2M					0x00000002
+#define	RATR_55M				0x00000004
+#define	RATR_11M				0x00000008
+#define	RATR_6M					0x00000010
+#define	RATR_9M					0x00000020
+#define	RATR_12M				0x00000040
+#define	RATR_18M				0x00000080
+#define	RATR_24M				0x00000100
+#define	RATR_36M				0x00000200
+#define	RATR_48M				0x00000400
+#define	RATR_54M				0x00000800
+#define	RATR_MCS0				0x00001000
+#define	RATR_MCS1				0x00002000
+#define	RATR_MCS2				0x00004000
+#define	RATR_MCS3				0x00008000
+#define	RATR_MCS4				0x00010000
+#define	RATR_MCS5				0x00020000
+#define	RATR_MCS6				0x00040000
+#define	RATR_MCS7				0x00080000
+#define	RATR_MCS8				0x00100000
+#define	RATR_MCS9				0x00200000
+#define	RATR_MCS10				0x00400000
+#define	RATR_MCS11				0x00800000
+#define	RATR_MCS12				0x01000000
+#define	RATR_MCS13				0x02000000
+#define	RATR_MCS14				0x04000000
+#define	RATR_MCS15				0x08000000
+
+#define	RATE_ALL_CCK				(RATR_1M | RATR_2M | \
+						RATR_55M | RATR_11M)
+#define	RATE_ALL_OFDM_AG			(RATR_6M | RATR_9M | \
+						RATR_12M | RATR_18M | \
+						RATR_24M | RATR_36M | \
+						RATR_48M | RATR_54M)
+#define	RATE_ALL_OFDM_1SS			(RATR_MCS0 | RATR_MCS1 | \
+						RATR_MCS2 | RATR_MCS3 | \
+						RATR_MCS4 | RATR_MCS5 | \
+						RATR_MCS6 | RATR_MCS7)
+#define	RATE_ALL_OFDM_2SS			(RATR_MCS8 | RATR_MCS9 | \
+						RATR_MCS10 | RATR_MCS11 | \
+						RATR_MCS12 | RATR_MCS13 | \
+						RATR_MCS14 | RATR_MCS15)
+
+#define	AC_PARAM_TXOP_LIMIT_OFFSET		16
+#define	AC_PARAM_ECW_MAX_OFFSET			12
+#define	AC_PARAM_ECW_MIN_OFFSET			8
+#define	AC_PARAM_AIFS_OFFSET			0
+
+#define	AcmHw_HwEn				BIT(0)
+#define	AcmHw_BeqEn				BIT(1)
+#define	AcmHw_ViqEn				BIT(2)
+#define	AcmHw_VoqEn				BIT(3)
+#define	AcmHw_BeqStatus				BIT(4)
+#define	AcmHw_ViqStatus				BIT(5)
+#define	AcmHw_VoqStatus				BIT(6)
+
+#define	RETRY_LIMIT_SHORT_SHIFT			8
+#define	RETRY_LIMIT_LONG_SHIFT			0
+
+#define	NAV_UPPER_EN				BIT(16)
+#define	NAV_UPPER				0xFF00
+#define	NAV_RTSRST				0xFF
+
+#define	BW_OPMODE_20MHZ				BIT(2)
+#define	BW_OPMODE_5G				BIT(1)
+#define	BW_OPMODE_11J				BIT(0)
+
+#define	RXERR_RPT_RST				BIT(27)
+#define	RXERR_OFDM_PPDU				0
+#define	RXERR_OFDM_FALSE_ALARM			1
+#define	RXERR_OFDM_MPDU_OK			2
+#define	RXERR_OFDM_MPDU_FAIL			3
+#define	RXERR_CCK_PPDU				4
+#define	RXERR_CCK_FALSE_ALARM			5
+#define	RXERR_CCK_MPDU_OK			6
+#define	RXERR_CCK_MPDU_FAIL			7
+#define	RXERR_HT_PPDU				8
+#define	RXERR_HT_FALSE_ALARM			9
+#define	RXERR_HT_MPDU_TOTAL			10
+#define	RXERR_HT_MPDU_OK			11
+#define	RXERR_HT_MPDU_FAIL			12
+#define	RXERR_RX_FULL_DROP			15
+
+#define	SCR_TXUSEDK				BIT(0)
+#define	SCR_RXUSEDK				BIT(1)
+#define	SCR_TXENCENABLE				BIT(2)
+#define	SCR_RXENCENABLE				BIT(3)
+#define	SCR_SKBYA2				BIT(4)
+#define	SCR_NOSKMC				BIT(5)
+
+#define	CAM_VALID				BIT(15)
+#define	CAM_NOTVALID				0x0000
+#define	CAM_USEDK				BIT(5)
+
+#define	CAM_NONE				0x0
+#define	CAM_WEP40				0x01
+#define	CAM_TKIP				0x02
+#define	CAM_AES					0x04
+#define	CAM_WEP104				0x05
+
+#define	TOTAL_CAM_ENTRY				32
+#define	HALF_CAM_ENTRY				16
+
+#define	CAM_WRITE				BIT(16)
+#define	CAM_READ				0x00000000
+#define	CAM_POLLINIG				BIT(31)
+
+#define	WOW_PMEN				BIT(0)
+#define	WOW_WOMEN				BIT(1)
+#define	WOW_MAGIC				BIT(2)
+#define	WOW_UWF					BIT(3)
+
+#define	GPIOMUX_EN				BIT(3)
+#define	GPIOSEL_GPIO				0
+#define	GPIOSEL_PHYDBG				1
+#define	GPIOSEL_BT				2
+#define	GPIOSEL_WLANDBG				3
+#define	GPIOSEL_GPIO_MASK			(~(BIT(0)|BIT(1)))
+
+#define	HST_RDBUSY				BIT(0)
+#define	CPU_WTBUSY				BIT(1)
+
+#define	IMR8190_DISABLED			0x0
+#define	IMR_CPUERR				BIT(5)
+#define	IMR_ATIMEND				BIT(4)
+#define	IMR_TBDOK				BIT(3)
+#define	IMR_TBDER				BIT(2)
+#define	IMR_BCNDMAINT8				BIT(1)
+#define	IMR_BCNDMAINT7				BIT(0)
+#define	IMR_BCNDMAINT6				BIT(31)
+#define	IMR_BCNDMAINT5				BIT(30)
+#define	IMR_BCNDMAINT4				BIT(29)
+#define	IMR_BCNDMAINT3				BIT(28)
+#define	IMR_BCNDMAINT2				BIT(27)
+#define	IMR_BCNDMAINT1				BIT(26)
+#define	IMR_BCNDOK8				BIT(25)
+#define	IMR_BCNDOK7				BIT(24)
+#define	IMR_BCNDOK6				BIT(23)
+#define	IMR_BCNDOK5				BIT(22)
+#define	IMR_BCNDOK4				BIT(21)
+#define	IMR_BCNDOK3				BIT(20)
+#define	IMR_BCNDOK2				BIT(19)
+#define	IMR_BCNDOK1				BIT(18)
+#define	IMR_TIMEOUT2				BIT(17)
+#define	IMR_TIMEOUT1				BIT(16)
+#define	IMR_TXFOVW				BIT(15)
+#define	IMR_PSTIMEOUT				BIT(14)
+#define	IMR_BCNINT				BIT(13)
+#define	IMR_RXFOVW				BIT(12)
+#define	IMR_RDU					BIT(11)
+#define	IMR_RXCMDOK				BIT(10)
+#define	IMR_BDOK				BIT(9)
+#define	IMR_HIGHDOK				BIT(8)
+#define	IMR_COMDOK				BIT(7)
+#define	IMR_MGNTDOK				BIT(6)
+#define	IMR_HCCADOK				BIT(5)
+#define	IMR_BKDOK				BIT(4)
+#define	IMR_BEDOK				BIT(3)
+#define	IMR_VIDOK				BIT(2)
+#define	IMR_VODOK				BIT(1)
+#define	IMR_ROK					BIT(0)
+
+#define	TPPOLL_BKQ				BIT(0)
+#define	TPPOLL_BEQ				BIT(1)
+#define	TPPOLL_VIQ				BIT(2)
+#define	TPPOLL_VOQ				BIT(3)
+#define	TPPOLL_BQ				BIT(4)
+#define	TPPOLL_CQ				BIT(5)
+#define	TPPOLL_MQ				BIT(6)
+#define	TPPOLL_HQ				BIT(7)
+#define	TPPOLL_HCCAQ				BIT(8)
+#define	TPPOLL_STOPBK				BIT(9)
+#define	TPPOLL_STOPBE				BIT(10)
+#define	TPPOLL_STOPVI				BIT(11)
+#define	TPPOLL_STOPVO				BIT(12)
+#define	TPPOLL_STOPMGT				BIT(13)
+#define	TPPOLL_STOPHIGH				BIT(14)
+#define	TPPOLL_STOPHCCA				BIT(15)
+#define	TPPOLL_SHIFT				8
+
+#define	CCX_CMD_CLM_ENABLE			BIT(0)
+#define	CCX_CMD_NHM_ENABLE			BIT(1)
+#define	CCX_CMD_FUNCTION_ENABLE			BIT(8)
+#define	CCX_CMD_IGNORE_CCA			BIT(9)
+#define	CCX_CMD_IGNORE_TXON			BIT(10)
+#define	CCX_CLM_RESULT_READY			BIT(16)
+#define	CCX_NHM_RESULT_READY			BIT(16)
+#define	CCX_CMD_RESET				0x0
+
+
+#define	HWSET_MAX_SIZE_92S			128
+#define EFUSE_MAX_SECTION			16
+#define EFUSE_REAL_CONTENT_LEN			512
+
+#define RTL8190_EEPROM_ID			0x8129
+#define EEPROM_HPON				0x02
+#define EEPROM_CLK				0x06
+#define EEPROM_TESTR				0x08
+
+#define EEPROM_VID				0x0A
+#define EEPROM_DID				0x0C
+#define EEPROM_SVID				0x0E
+#define EEPROM_SMID				0x10
+
+#define EEPROM_MAC_ADDR				0x12
+#define EEPROM_NODE_ADDRESS_BYTE_0		0x12
+
+#define EEPROM_PWDIFF				0x54
+
+#define EEPROM_TXPOWERBASE			0x50
+#define	EEPROM_TX_PWR_INDEX_RANGE		28
+
+#define EEPROM_TX_PWR_HT20_DIFF			0x62
+#define DEFAULT_HT20_TXPWR_DIFF			2
+#define EEPROM_TX_PWR_OFDM_DIFF			0x65
+
+#define	EEPROM_TXPWRGROUP			0x67
+#define EEPROM_REGULATORY			0x6D
+
+#define TX_PWR_SAFETY_CHK			0x6D
+#define EEPROM_TXPWINDEX_CCK_24G		0x5D
+#define EEPROM_TXPWINDEX_OFDM_24G		0x6B
+#define EEPROM_HT2T_CH1_A			0x6c
+#define EEPROM_HT2T_CH7_A			0x6d
+#define EEPROM_HT2T_CH13_A			0x6e
+#define EEPROM_HT2T_CH1_B			0x6f
+#define EEPROM_HT2T_CH7_B			0x70
+#define EEPROM_HT2T_CH13_B			0x71
+
+#define EEPROM_TSSI_A				0x74
+#define EEPROM_TSSI_B				0x75
+
+#define	EEPROM_RFIND_POWERDIFF			0x76
+#define	EEPROM_DEFAULT_LEGACYHTTXPOWERDIFF	0x3
+
+#define EEPROM_THERMALMETER			0x77
+#define	EEPROM_BLUETOOTH_COEXIST		0x78
+#define	EEPROM_BLUETOOTH_TYPE			0x4f
+
+#define	EEPROM_OPTIONAL				0x78
+#define	EEPROM_WOWLAN				0x78
+
+#define EEPROM_CRYSTALCAP			0x79
+#define EEPROM_CHANNELPLAN			0x7B
+#define EEPROM_VERSION				0x7C
+#define	EEPROM_CUSTOMID				0x7A
+#define EEPROM_BOARDTYPE			0x7E
+
+#define	EEPROM_CHANNEL_PLAN_FCC			0x0
+#define	EEPROM_CHANNEL_PLAN_IC			0x1
+#define	EEPROM_CHANNEL_PLAN_ETSI		0x2
+#define	EEPROM_CHANNEL_PLAN_SPAIN		0x3
+#define	EEPROM_CHANNEL_PLAN_FRANCE		0x4
+#define	EEPROM_CHANNEL_PLAN_MKK			0x5
+#define	EEPROM_CHANNEL_PLAN_MKK1		0x6
+#define	EEPROM_CHANNEL_PLAN_ISRAEL		0x7
+#define	EEPROM_CHANNEL_PLAN_TELEC		0x8
+#define	EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN	0x9
+#define	EEPROM_CHANNEL_PLAN_WORLD_WIDE_13	0xA
+#define	EEPROM_CHANNEL_PLAN_NCC			0xB
+#define	EEPROM_CHANNEL_PLAN_BY_HW_MASK		0x80
+
+#define	FW_DIG_DISABLE				0xfd00cc00
+#define	FW_DIG_ENABLE				0xfd000000
+#define	FW_DIG_HALT				0xfd000001
+#define	FW_DIG_RESUME				0xfd000002
+#define	FW_HIGH_PWR_DISABLE			0xfd000008
+#define	FW_HIGH_PWR_ENABLE			0xfd000009
+#define	FW_ADD_A2_ENTRY				0xfd000016
+#define	FW_TXPWR_TRACK_ENABLE			0xfd000017
+#define	FW_TXPWR_TRACK_DISABLE			0xfd000018
+#define	FW_TXPWR_TRACK_THERMAL			0xfd000019
+#define	FW_TXANT_SWITCH_ENABLE			0xfd000023
+#define	FW_TXANT_SWITCH_DISABLE			0xfd000024
+#define	FW_RA_INIT				0xfd000026
+#define	FW_CTRL_DM_BY_DRIVER			0Xfd00002a
+#define	FW_RA_IOT_BG_COMB			0xfd000030
+#define	FW_RA_IOT_N_COMB			0xfd000031
+#define	FW_RA_REFRESH				0xfd0000a0
+#define	FW_RA_UPDATE_MASK			0xfd0000a2
+#define	FW_RA_DISABLE				0xfd0000a4
+#define	FW_RA_ACTIVE				0xfd0000a6
+#define	FW_RA_DISABLE_RSSI_MASK			0xfd0000ac
+#define	FW_RA_ENABLE_RSSI_MASK			0xfd0000ad
+#define	FW_RA_RESET				0xfd0000af
+#define	FW_DM_DISABLE				0xfd00aa00
+#define	FW_IQK_ENABLE				0xf0000020
+#define	FW_IQK_SUCCESS				0x0000dddd
+#define	FW_IQK_FAIL				0x0000ffff
+#define	FW_OP_FAILURE				0xffffffff
+#define	FW_TX_FEEDBACK_NONE			0xfb000000
+#define	FW_TX_FEEDBACK_DTM_ENABLE		(FW_TX_FEEDBACK_NONE | 0x1)
+#define	FW_TX_FEEDBACK_CCX_ENABL		(FW_TX_FEEDBACK_NONE | 0x2)
+#define	FW_BB_RESET_ENABLE			0xff00000d
+#define	FW_BB_RESET_DISABLE			0xff00000e
+#define	FW_CCA_CHK_ENABLE			0xff000011
+#define	FW_CCK_RESET_CNT			0xff000013
+#define	FW_LPS_ENTER				0xfe000010
+#define	FW_LPS_LEAVE				0xfe000011
+#define	FW_INDIRECT_READ			0xf2000000
+#define	FW_INDIRECT_WRITE			0xf2000001
+#define	FW_CHAN_SET				0xf3000001
+
+#define RFPC					0x5F
+#define RCR_9356SEL				BIT(6)
+#define TCR_LRL_OFFSET				0
+#define TCR_SRL_OFFSET				8
+#define TCR_MXDMA_OFFSET			21
+#define TCR_SAT					BIT(24)
+#define RCR_MXDMA_OFFSET			8
+#define RCR_FIFO_OFFSET				13
+#define RCR_OnlyErlPkt				BIT(31)
+#define CWR					0xDC
+#define RETRYCTR				0xDE
+
+#define CPU_GEN_SYSTEM_RESET			0x00000001
+
+#define	CCX_COMMAND_REG				0x890
+#define	CLM_PERIOD_REG				0x894
+#define	NHM_PERIOD_REG				0x896
+
+#define	NHM_THRESHOLD0				0x898
+#define	NHM_THRESHOLD1				0x899
+#define	NHM_THRESHOLD2				0x89A
+#define	NHM_THRESHOLD3				0x89B
+#define	NHM_THRESHOLD4				0x89C
+#define	NHM_THRESHOLD5				0x89D
+#define	NHM_THRESHOLD6				0x89E
+#define	CLM_RESULT_REG				0x8D0
+#define	NHM_RESULT_REG				0x8D4
+#define	NHM_RPI_COUNTER0			0x8D8
+#define	NHM_RPI_COUNTER1			0x8D9
+#define	NHM_RPI_COUNTER2			0x8DA
+#define	NHM_RPI_COUNTER3			0x8DB
+#define	NHM_RPI_COUNTER4			0x8DC
+#define	NHM_RPI_COUNTER5			0x8DD
+#define	NHM_RPI_COUNTER6			0x8DE
+#define	NHM_RPI_COUNTER7			0x8DF
+
+#define	HAL_8192S_HW_GPIO_OFF_BIT		BIT(3)
+#define	HAL_8192S_HW_GPIO_OFF_MASK		0xF7
+#define	HAL_8192S_HW_GPIO_WPS_BIT		BIT(4)
+
+#define	RPMAC_RESET				0x100
+#define	RPMAC_TXSTART				0x104
+#define	RPMAC_TXLEGACYSIG			0x108
+#define	RPMAC_TXHTSIG1				0x10c
+#define	RPMAC_TXHTSIG2				0x110
+#define	RPMAC_PHYDEBUG				0x114
+#define	RPMAC_TXPACKETNNM			0x118
+#define	RPMAC_TXIDLE				0x11c
+#define	RPMAC_TXMACHEADER0			0x120
+#define	RPMAC_TXMACHEADER1			0x124
+#define	RPMAC_TXMACHEADER2			0x128
+#define	RPMAC_TXMACHEADER3			0x12c
+#define	RPMAC_TXMACHEADER4			0x130
+#define	RPMAC_TXMACHEADER5			0x134
+#define	RPMAC_TXDATATYPE			0x138
+#define	RPMAC_TXRANDOMSEED			0x13c
+#define	RPMAC_CCKPLCPPREAMBLE			0x140
+#define	RPMAC_CCKPLCPHEADER			0x144
+#define	RPMAC_CCKCRC16				0x148
+#define	RPMAC_OFDMRXCRC32OK			0x170
+#define	RPMAC_OFDMRXCRC32ER			0x174
+#define	RPMAC_OFDMRXPARITYER			0x178
+#define	RPMAC_OFDMRXCRC8ER			0x17c
+#define	RPMAC_CCKCRXRC16ER			0x180
+#define	RPMAC_CCKCRXRC32ER			0x184
+#define	RPMAC_CCKCRXRC32OK			0x188
+#define	RPMAC_TXSTATUS				0x18c
+
+#define	RF_BB_CMD_ADDR				0x02c0
+#define	RF_BB_CMD_DATA				0x02c4
+
+#define	RFPGA0_RFMOD				0x800
+
+#define	RFPGA0_TXINFO				0x804
+#define	RFPGA0_PSDFUNCTION			0x808
+
+#define	RFPGA0_TXGAINSTAGE			0x80c
+
+#define	RFPGA0_RFTIMING1			0x810
+#define	RFPGA0_RFTIMING2			0x814
+#define	RFPGA0_XA_HSSIPARAMETER1		0x820
+#define	RFPGA0_XA_HSSIPARAMETER2		0x824
+#define	RFPGA0_XB_HSSIPARAMETER1		0x828
+#define	RFPGA0_XB_HSSIPARAMETER2		0x82c
+#define	RFPGA0_XC_HSSIPARAMETER1		0x830
+#define	RFPGA0_XC_HSSIPARAMETER2		0x834
+#define	RFPGA0_XD_HSSIPARAMETER1		0x838
+#define	RFPGA0_XD_HSSIPARAMETER2		0x83c
+#define	RFPGA0_XA_LSSIPARAMETER			0x840
+#define	RFPGA0_XB_LSSIPARAMETER			0x844
+#define	RFPGA0_XC_LSSIPARAMETER			0x848
+#define	RFPGA0_XD_LSSIPARAMETER			0x84c
+
+#define	RFPGA0_RFWAKEUP_PARAMETER		0x850
+#define	RFPGA0_RFSLEEPUP_PARAMETER		0x854
+
+#define	RFPGA0_XAB_SWITCHCONTROL		0x858
+#define	RFPGA0_XCD_SWITCHCONTROL		0x85c
+
+#define	RFPGA0_XA_RFINTERFACEOE			0x860
+#define	RFPGA0_XB_RFINTERFACEOE			0x864
+#define	RFPGA0_XC_RFINTERFACEOE			0x868
+#define	RFPGA0_XD_RFINTERFACEOE			0x86c
+
+#define	RFPGA0_XAB_RFINTERFACESW		0x870
+#define	RFPGA0_XCD_RFINTERFACESW		0x874
+
+#define	RFPGA0_XAB_RFPARAMETER			0x878
+#define	RFPGA0_XCD_RFPARAMETER			0x87c
+
+#define	RFPGA0_ANALOGPARAMETER1			0x880
+#define	RFPGA0_ANALOGPARAMETER2			0x884
+#define	RFPGA0_ANALOGPARAMETER3			0x888
+#define	RFPGA0_ANALOGPARAMETER4			0x88c
+
+#define	RFPGA0_XA_LSSIREADBACK			0x8a0
+#define	RFPGA0_XB_LSSIREADBACK			0x8a4
+#define	RFPGA0_XC_LSSIREADBACK			0x8a8
+#define	RFPGA0_XD_LSSIREADBACK			0x8ac
+
+#define	RFPGA0_PSDREPORT			0x8b4
+#define	TRANSCEIVERA_HSPI_READBACK		0x8b8
+#define	TRANSCEIVERB_HSPI_READBACK		0x8bc
+#define	RFPGA0_XAB_RFINTERFACERB		0x8e0
+#define	RFPGA0_XCD_RFINTERFACERB		0x8e4
+#define	RFPGA1_RFMOD				0x900
+
+#define	RFPGA1_TXBLOCK				0x904
+#define	RFPGA1_DEBUGSELECT			0x908
+#define	RFPGA1_TXINFO				0x90c
+
+#define	RCCK0_SYSTEM				0xa00
+
+#define	RCCK0_AFESETTING			0xa04
+#define	RCCK0_CCA				0xa08
+
+#define	RCCK0_RXAGC1				0xa0c
+#define	RCCK0_RXAGC2				0xa10
+
+#define	RCCK0_RXHP				0xa14
+
+#define	RCCK0_DSPPARAMETER1			0xa18
+#define	RCCK0_DSPPARAMETER2			0xa1c
+
+#define	RCCK0_TXFILTER1				0xa20
+#define	RCCK0_TXFILTER2				0xa24
+#define	RCCK0_DEBUGPORT				0xa28
+#define	RCCK0_FALSEALARMREPORT			0xa2c
+#define	RCCK0_TRSSIREPORT			0xa50
+#define	RCCK0_RXREPORT				0xa54
+#define	RCCK0_FACOUNTERLOWER			0xa5c
+#define	RCCK0_FACOUNTERUPPER			0xa58
+
+#define	ROFDM0_LSTF				0xc00
+
+#define	ROFDM0_TRXPATHENABLE			0xc04
+#define	ROFDM0_TRMUXPAR				0xc08
+#define	ROFDM0_TRSWISOLATION			0xc0c
+
+#define	ROFDM0_XARXAFE				0xc10
+#define	ROFDM0_XARXIQIMBALANCE			0xc14
+#define	ROFDM0_XBRXAFE				0xc18
+#define	ROFDM0_XBRXIQIMBALANCE			0xc1c
+#define	ROFDM0_XCRXAFE				0xc20
+#define	ROFDM0_XCRXIQIMBALANCE			0xc24
+#define	ROFDM0_XDRXAFE				0xc28
+#define	ROFDM0_XDRXIQIMBALANCE			0xc2c
+
+#define	ROFDM0_RXDETECTOR1			0xc30
+#define	ROFDM0_RXDETECTOR2			0xc34
+#define	ROFDM0_RXDETECTOR3			0xc38
+#define	ROFDM0_RXDETECTOR4			0xc3c
+
+#define	ROFDM0_RXDSP				0xc40
+#define	ROFDM0_CFO_AND_DAGC			0xc44
+#define	ROFDM0_CCADROP_THRESHOLD		0xc48
+#define	ROFDM0_ECCA_THRESHOLD			0xc4c
+
+#define	ROFDM0_XAAGCCORE1			0xc50
+#define	ROFDM0_XAAGCCORE2			0xc54
+#define	ROFDM0_XBAGCCORE1			0xc58
+#define	ROFDM0_XBAGCCORE2			0xc5c
+#define	ROFDM0_XCAGCCORE1			0xc60
+#define	ROFDM0_XCAGCCORE2			0xc64
+#define	ROFDM0_XDAGCCORE1			0xc68
+#define	ROFDM0_XDAGCCORE2			0xc6c
+
+#define	ROFDM0_AGCPARAMETER1			0xc70
+#define	ROFDM0_AGCPARAMETER2			0xc74
+#define	ROFDM0_AGCRSSITABLE			0xc78
+#define	ROFDM0_HTSTFAGC				0xc7c
+
+#define	ROFDM0_XATXIQIMBALANCE			0xc80
+#define	ROFDM0_XATXAFE				0xc84
+#define	ROFDM0_XBTXIQIMBALANCE			0xc88
+#define	ROFDM0_XBTXAFE				0xc8c
+#define	ROFDM0_XCTXIQIMBALANCE			0xc90
+#define	ROFDM0_XCTXAFE				0xc94
+#define	ROFDM0_XDTXIQIMBALANCE			0xc98
+#define	ROFDM0_XDTXAFE				0xc9c
+
+#define	ROFDM0_RXHP_PARAMETER			0xce0
+#define	ROFDM0_TXPSEUDO_NOISE_WGT		0xce4
+#define	ROFDM0_FRAME_SYNC			0xcf0
+#define	ROFDM0_DFSREPORT			0xcf4
+#define	ROFDM0_TXCOEFF1				0xca4
+#define	ROFDM0_TXCOEFF2				0xca8
+#define	ROFDM0_TXCOEFF3				0xcac
+#define	ROFDM0_TXCOEFF4				0xcb0
+#define	ROFDM0_TXCOEFF5				0xcb4
+#define	ROFDM0_TXCOEFF6				0xcb8
+
+
+#define	ROFDM1_LSTF				0xd00
+#define	ROFDM1_TRXPATHENABLE			0xd04
+
+#define	ROFDM1_CFO				0xd08
+#define	ROFDM1_CSI1				0xd10
+#define	ROFDM1_SBD				0xd14
+#define	ROFDM1_CSI2				0xd18
+#define	ROFDM1_CFOTRACKING			0xd2c
+#define	ROFDM1_TRXMESAURE1			0xd34
+#define	ROFDM1_INTF_DET				0xd3c
+#define	ROFDM1_PSEUDO_NOISESTATEAB		0xd50
+#define	ROFDM1_PSEUDO_NOISESTATECD		0xd54
+#define	ROFDM1_RX_PSEUDO_NOISE_WGT		0xd58
+
+#define	ROFDM_PHYCOUNTER1			0xda0
+#define	ROFDM_PHYCOUNTER2			0xda4
+#define	ROFDM_PHYCOUNTER3			0xda8
+
+#define	ROFDM_SHORT_CFOAB			0xdac
+#define	ROFDM_SHORT_CFOCD			0xdb0
+#define	ROFDM_LONG_CFOAB			0xdb4
+#define	ROFDM_LONG_CFOCD			0xdb8
+#define	ROFDM_TAIL_CFOAB			0xdbc
+#define	ROFDM_TAIL_CFOCD			0xdc0
+#define	ROFDM_PW_MEASURE1			0xdc4
+#define	ROFDM_PW_MEASURE2			0xdc8
+#define	ROFDM_BW_REPORT				0xdcc
+#define	ROFDM_AGC_REPORT			0xdd0
+#define	ROFDM_RXSNR				0xdd4
+#define	ROFDM_RXEVMCSI				0xdd8
+#define	ROFDM_SIG_REPORT			0xddc
+
+
+#define	RTXAGC_RATE18_06			0xe00
+#define	RTXAGC_RATE54_24			0xe04
+#define	RTXAGC_CCK_MCS32			0xe08
+#define	RTXAGC_MCS03_MCS00			0xe10
+#define	RTXAGC_MCS07_MCS04			0xe14
+#define	RTXAGC_MCS11_MCS08			0xe18
+#define	RTXAGC_MCS15_MCS12			0xe1c
+
+
+#define	RF_AC					0x00
+#define	RF_IQADJ_G1				0x01
+#define	RF_IQADJ_G2				0x02
+#define	RF_POW_TRSW				0x05
+#define	RF_GAIN_RX				0x06
+#define	RF_GAIN_TX				0x07
+#define	RF_TXM_IDAC				0x08
+#define	RF_BS_IQGEN				0x0F
+
+#define	RF_MODE1				0x10
+#define	RF_MODE2				0x11
+#define	RF_RX_AGC_HP				0x12
+#define	RF_TX_AGC				0x13
+#define	RF_BIAS					0x14
+#define	RF_IPA					0x15
+#define	RF_POW_ABILITY				0x17
+#define	RF_MODE_AG				0x18
+#define	RF_CHANNEL				0x18
+#define	RF_CHNLBW				0x18
+#define	RF_TOP					0x19
+#define	RF_RX_G1				0x1A
+#define	RF_RX_G2				0x1B
+#define	RF_RX_BB2				0x1C
+#define	RF_RX_BB1				0x1D
+#define	RF_RCK1					0x1E
+#define	RF_RCK2					0x1F
+
+#define	RF_TX_G1				0x20
+#define	RF_TX_G2				0x21
+#define	RF_TX_G3				0x22
+#define	RF_TX_BB1				0x23
+#define	RF_T_METER				0x24
+#define	RF_SYN_G1				0x25
+#define	RF_SYN_G2				0x26
+#define	RF_SYN_G3				0x27
+#define	RF_SYN_G4				0x28
+#define	RF_SYN_G5				0x29
+#define	RF_SYN_G6				0x2A
+#define	RF_SYN_G7				0x2B
+#define	RF_SYN_G8				0x2C
+
+#define	RF_RCK_OS				0x30
+#define	RF_TXPA_G1				0x31
+#define	RF_TXPA_G2				0x32
+#define	RF_TXPA_G3				0x33
+
+#define	BRFMOD					0x1
+#define	BCCKEN					0x1000000
+#define	BOFDMEN					0x2000000
+
+#define	BXBTXAGC				0xf00
+#define	BXCTXAGC				0xf000
+#define	BXDTXAGC				0xf0000
+
+#define	B3WIRE_DATALENGTH			0x800
+#define	B3WIRE_ADDRESSLENGTH			0x400
+
+#define	BRFSI_RFENV				0x10
+
+#define	BLSSI_READADDRESS			0x7f800000
+#define	BLSSI_READEDGE				0x80000000
+#define	BLSSI_READBACK_DATA			0xfffff
+
+#define	BADCLKPHASE				0x4000000
+
+#define	BCCK_SIDEBAND				0x10
+
+#define	BTX_AGCRATECCK				0x7f00
+
+#define	MASKBYTE0				0xff
+#define	MASKBYTE1				0xff00
+#define	MASKBYTE2				0xff0000
+#define	MASKBYTE3				0xff000000
+#define	MASKHWORD				0xffff0000
+#define	MASKLWORD				0x0000ffff
+#define	MASKDWORD				0xffffffff
+
+#define	MAKS12BITS				0xfffff
+#define	MASK20BITS				0xfffff
+#define RFREG_OFFSET_MASK			0xfffff
+
+#endif
-- 
cgit v1.2.3


From e5e8cd76511cb62391a5b64fa4ffdf88b09b6826 Mon Sep 17 00:00:00 2001
From: Chaoming Li <chaoming_li@realsil.com.cn>
Date: Tue, 3 May 2011 09:48:56 -0500
Subject: rtlwifi: rtl8192se: Merge rf routines

Merge routines rf.c and rf.h for RTL8192SE.

Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8192se/rf.c | 546 ++++++++++++++++++++++++++++
 drivers/net/wireless/rtlwifi/rtl8192se/rf.h |  43 +++
 2 files changed, 589 insertions(+)
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8192se/rf.c
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8192se/rf.h

diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/rf.c b/drivers/net/wireless/rtlwifi/rtl8192se/rf.c
new file mode 100644
index 00000000000..1d3a4833039
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/rf.c
@@ -0,0 +1,546 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "rf.h"
+#include "dm.h"
+
+
+static void _rtl92s_get_powerbase(struct ieee80211_hw *hw, u8 *p_pwrlevel,
+				  u8 chnl, u32 *ofdmbase, u32 *mcsbase,
+				  u8 *p_final_pwridx)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u32 pwrbase0, pwrbase1;
+	u8 legacy_pwrdiff = 0, ht20_pwrdiff = 0;
+	u8 i, pwrlevel[4];
+
+	for (i = 0; i < 2; i++)
+		pwrlevel[i] = p_pwrlevel[i];
+
+	/* We only care about the path A for legacy. */
+	if (rtlefuse->eeprom_version < 2) {
+		pwrbase0 = pwrlevel[0] + (rtlefuse->legacy_httxpowerdiff & 0xf);
+	} else if (rtlefuse->eeprom_version >= 2) {
+		legacy_pwrdiff = rtlefuse->txpwr_legacyhtdiff
+						[RF90_PATH_A][chnl - 1];
+
+		/* For legacy OFDM, tx pwr always > HT OFDM pwr.
+		 * We do not care Path B
+		 * legacy OFDM pwr diff. NO BB register
+		 * to notify HW. */
+		pwrbase0 = pwrlevel[0] + legacy_pwrdiff;
+	}
+
+	pwrbase0 = (pwrbase0 << 24) | (pwrbase0 << 16) | (pwrbase0 << 8) |
+		    pwrbase0;
+	*ofdmbase = pwrbase0;
+
+	/* MCS rates */
+	if (rtlefuse->eeprom_version >= 2) {
+		/* Check HT20 to HT40 diff	*/
+		if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20) {
+			for (i = 0; i < 2; i++) {
+				/* rf-A, rf-B */
+				/* HT 20<->40 pwr diff */
+				ht20_pwrdiff = rtlefuse->txpwr_ht20diff
+							[i][chnl - 1];
+
+				if (ht20_pwrdiff < 8) /* 0~+7 */
+					pwrlevel[i] += ht20_pwrdiff;
+				else /* index8-15=-8~-1 */
+					pwrlevel[i] -= (16 - ht20_pwrdiff);
+			}
+		}
+	}
+
+	/* use index of rf-A */
+	pwrbase1 = pwrlevel[0];
+	pwrbase1 = (pwrbase1 << 24) | (pwrbase1 << 16) | (pwrbase1 << 8) |
+				pwrbase1;
+	*mcsbase = pwrbase1;
+
+	/* The following is for Antenna
+	 * diff from Ant-B to Ant-A */
+	p_final_pwridx[0] = pwrlevel[0];
+	p_final_pwridx[1] = pwrlevel[1];
+
+	switch (rtlefuse->eeprom_regulatory) {
+	case 3:
+		/* The following is for calculation
+		 * of the power diff for Ant-B to Ant-A. */
+		if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
+			p_final_pwridx[0] += rtlefuse->pwrgroup_ht40
+						[RF90_PATH_A][
+						chnl - 1];
+			p_final_pwridx[1] += rtlefuse->pwrgroup_ht40
+						[RF90_PATH_B][
+						chnl - 1];
+		} else {
+			p_final_pwridx[0] += rtlefuse->pwrgroup_ht20
+						[RF90_PATH_A][
+						chnl - 1];
+			p_final_pwridx[1] += rtlefuse->pwrgroup_ht20
+						[RF90_PATH_B][
+						chnl - 1];
+		}
+		break;
+	default:
+		break;
+	}
+
+	if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, ("40MHz finalpwr_idx "
+			"(A / B) = 0x%x / 0x%x\n", p_final_pwridx[0],
+			p_final_pwridx[1]));
+	} else {
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, ("20MHz finalpwr_idx "
+			"(A / B) = 0x%x / 0x%x\n", p_final_pwridx[0],
+			 p_final_pwridx[1]));
+	}
+}
+
+static void _rtl92s_set_antennadiff(struct ieee80211_hw *hw,
+				    u8 *p_final_pwridx)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	char ant_pwr_diff = 0;
+	u32	u4reg_val = 0;
+
+	if (rtlphy->rf_type == RF_2T2R) {
+		ant_pwr_diff = p_final_pwridx[1] - p_final_pwridx[0];
+
+		/* range is from 7~-8,
+		 * index = 0x0~0xf */
+		if (ant_pwr_diff > 7)
+			ant_pwr_diff = 7;
+		if (ant_pwr_diff < -8)
+			ant_pwr_diff = -8;
+
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+			 ("Antenna Diff from RF-B "
+			"to RF-A = %d (0x%x)\n", ant_pwr_diff,
+			 ant_pwr_diff & 0xf));
+
+		ant_pwr_diff &= 0xf;
+	}
+
+	/* Antenna TX power difference */
+	rtlefuse->antenna_txpwdiff[2] = 0;/* RF-D, don't care */
+	rtlefuse->antenna_txpwdiff[1] = 0;/* RF-C, don't care */
+	rtlefuse->antenna_txpwdiff[0] = (u8)(ant_pwr_diff);	/* RF-B */
+
+	u4reg_val = rtlefuse->antenna_txpwdiff[2] << 8 |
+				rtlefuse->antenna_txpwdiff[1] << 4 |
+				rtlefuse->antenna_txpwdiff[0];
+
+	rtl_set_bbreg(hw, RFPGA0_TXGAINSTAGE, (BXBTXAGC | BXCTXAGC | BXDTXAGC),
+		      u4reg_val);
+
+	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+		 ("Write BCD-Diff(0x%x) = 0x%x\n",
+		 RFPGA0_TXGAINSTAGE, u4reg_val));
+}
+
+static void _rtl92s_get_txpower_writeval_byregulatory(struct ieee80211_hw *hw,
+						      u8 chnl, u8 index,
+						      u32 pwrbase0,
+						      u32 pwrbase1,
+						      u32 *p_outwrite_val)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 i, chnlgroup, pwrdiff_limit[4];
+	u32 writeval, customer_limit;
+
+	/* Index 0 & 1= legacy OFDM, 2-5=HT_MCS rate */
+	switch (rtlefuse->eeprom_regulatory) {
+	case 0:
+		/* Realtek better performance increase power diff
+		 * defined by Realtek for large power */
+		chnlgroup = 0;
+
+		writeval = rtlphy->mcs_txpwrlevel_origoffset
+				[chnlgroup][index] +
+				((index < 2) ? pwrbase0 : pwrbase1);
+
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+			 ("RTK better performance, "
+			 "writeval = 0x%x\n", writeval));
+		break;
+	case 1:
+		/* Realtek regulatory increase power diff defined
+		 * by Realtek for regulatory */
+		if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
+			writeval = ((index < 2) ? pwrbase0 : pwrbase1);
+
+			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+				 ("Realtek regulatory, "
+				 "40MHz, writeval = 0x%x\n", writeval));
+		} else {
+			if (rtlphy->pwrgroup_cnt == 1)
+				chnlgroup = 0;
+
+			if (rtlphy->pwrgroup_cnt >= 3) {
+				if (chnl <= 3)
+					chnlgroup = 0;
+				else if (chnl >= 4 && chnl <= 8)
+					chnlgroup = 1;
+				else if (chnl > 8)
+					chnlgroup = 2;
+				if (rtlphy->pwrgroup_cnt == 4)
+					chnlgroup++;
+			}
+
+			writeval = rtlphy->mcs_txpwrlevel_origoffset
+					[chnlgroup][index]
+					+ ((index < 2) ?
+					pwrbase0 : pwrbase1);
+
+			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+				 ("Realtek regulatory, "
+				 "20MHz, writeval = 0x%x\n", writeval));
+		}
+		break;
+	case 2:
+		/* Better regulatory don't increase any power diff */
+		writeval = ((index < 2) ? pwrbase0 : pwrbase1);
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+			 ("Better regulatory, "
+			 "writeval = 0x%x\n", writeval));
+		break;
+	case 3:
+		/* Customer defined power diff. increase power diff
+		  defined by customer. */
+		chnlgroup = 0;
+
+		if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
+			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+				("customer's limit, 40MHz = 0x%x\n",
+				rtlefuse->pwrgroup_ht40
+				[RF90_PATH_A][chnl - 1]));
+		} else {
+			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+				("customer's limit, 20MHz = 0x%x\n",
+				rtlefuse->pwrgroup_ht20
+				[RF90_PATH_A][chnl - 1]));
+		}
+
+		for (i = 0; i < 4; i++) {
+			pwrdiff_limit[i] =
+				(u8)((rtlphy->mcs_txpwrlevel_origoffset
+				[chnlgroup][index] & (0x7f << (i * 8)))
+				>> (i * 8));
+
+			if (rtlphy->current_chan_bw ==
+			    HT_CHANNEL_WIDTH_20_40) {
+				if (pwrdiff_limit[i] >
+				    rtlefuse->pwrgroup_ht40
+				    [RF90_PATH_A][chnl - 1]) {
+					pwrdiff_limit[i] =
+					  rtlefuse->pwrgroup_ht20
+					  [RF90_PATH_A][chnl - 1];
+				}
+			} else {
+				if (pwrdiff_limit[i] >
+				    rtlefuse->pwrgroup_ht20
+				    [RF90_PATH_A][chnl - 1]) {
+					pwrdiff_limit[i] =
+					    rtlefuse->pwrgroup_ht20
+					    [RF90_PATH_A][chnl - 1];
+				}
+			}
+		}
+
+		customer_limit = (pwrdiff_limit[3] << 24) |
+				(pwrdiff_limit[2] << 16) |
+				(pwrdiff_limit[1] << 8) |
+				(pwrdiff_limit[0]);
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+			 ("Customer's limit = 0x%x\n",
+			 customer_limit));
+
+		writeval = customer_limit + ((index < 2) ?
+					     pwrbase0 : pwrbase1);
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+			 ("Customer, writeval = "
+			 "0x%x\n", writeval));
+		break;
+	default:
+		chnlgroup = 0;
+		writeval = rtlphy->mcs_txpwrlevel_origoffset[chnlgroup][index] +
+				((index < 2) ? pwrbase0 : pwrbase1);
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+			 ("RTK better performance, "
+			 "writeval = 0x%x\n", writeval));
+		break;
+	}
+
+	if (rtlpriv->dm.dynamic_txhighpower_lvl == TX_HIGH_PWR_LEVEL_LEVEL1)
+		writeval = 0x10101010;
+	else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
+		 TX_HIGH_PWR_LEVEL_LEVEL2)
+		writeval = 0x0;
+
+	*p_outwrite_val = writeval;
+
+}
+
+static void _rtl92s_write_ofdm_powerreg(struct ieee80211_hw *hw,
+					u8 index, u32 val)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u16 regoffset[6] = {0xe00, 0xe04, 0xe10, 0xe14, 0xe18, 0xe1c};
+	u8 i, rfa_pwr[4];
+	u8 rfa_lower_bound = 0, rfa_upper_bound = 0, rf_pwr_diff = 0;
+	u32 writeval = val;
+
+	/* If path A and Path B coexist, we must limit Path A tx power.
+	 * Protect Path B pwr over or under flow. We need to calculate
+	 * upper and lower bound of path A tx power. */
+	if (rtlphy->rf_type == RF_2T2R) {
+		rf_pwr_diff = rtlefuse->antenna_txpwdiff[0];
+
+		/* Diff=-8~-1 */
+		if (rf_pwr_diff >= 8) {
+			/* Prevent underflow!! */
+			rfa_lower_bound = 0x10 - rf_pwr_diff;
+		/* if (rf_pwr_diff >= 0) Diff = 0-7 */
+		} else {
+			rfa_upper_bound = RF6052_MAX_TX_PWR - rf_pwr_diff;
+		}
+	}
+
+	for (i = 0; i < 4; i++) {
+		rfa_pwr[i] = (u8)((writeval & (0x7f << (i * 8))) >> (i * 8));
+		if (rfa_pwr[i]  > RF6052_MAX_TX_PWR)
+			rfa_pwr[i]  = RF6052_MAX_TX_PWR;
+
+		/* If path A and Path B coexist, we must limit Path A tx power.
+		 * Protect Path B pwr over or under flow. We need to calculate
+		 * upper and lower bound of path A tx power. */
+		if (rtlphy->rf_type == RF_2T2R) {
+			/* Diff=-8~-1 */
+			if (rf_pwr_diff >= 8) {
+				/* Prevent underflow!! */
+				if (rfa_pwr[i] < rfa_lower_bound)
+					rfa_pwr[i] = rfa_lower_bound;
+			/* Diff = 0-7 */
+			} else if (rf_pwr_diff >= 1) {
+				/* Prevent overflow */
+				if (rfa_pwr[i] > rfa_upper_bound)
+					rfa_pwr[i] = rfa_upper_bound;
+			}
+		}
+
+	}
+
+	writeval = (rfa_pwr[3] << 24) | (rfa_pwr[2] << 16) | (rfa_pwr[1] << 8) |
+				rfa_pwr[0];
+
+	rtl_set_bbreg(hw, regoffset[index], 0x7f7f7f7f, writeval);
+}
+
+void rtl92s_phy_rf6052_set_ofdmtxpower(struct ieee80211_hw *hw,
+				       u8 *p_pwrlevel, u8 chnl)
+{
+	u32 writeval, pwrbase0, pwrbase1;
+	u8 index = 0;
+	u8 finalpwr_idx[4];
+
+	_rtl92s_get_powerbase(hw, p_pwrlevel, chnl, &pwrbase0, &pwrbase1,
+			&finalpwr_idx[0]);
+	_rtl92s_set_antennadiff(hw, &finalpwr_idx[0]);
+
+	for (index = 0; index < 6; index++) {
+		_rtl92s_get_txpower_writeval_byregulatory(hw, chnl, index,
+				pwrbase0, pwrbase1, &writeval);
+
+		_rtl92s_write_ofdm_powerreg(hw, index, writeval);
+	}
+}
+
+void rtl92s_phy_rf6052_set_ccktxpower(struct ieee80211_hw *hw, u8 pwrlevel)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u32 txagc = 0;
+	bool dont_inc_cck_or_turboscanoff = false;
+
+	if (((rtlefuse->eeprom_version >= 2) &&
+	      (rtlefuse->txpwr_safetyflag == 1)) ||
+	      ((rtlefuse->eeprom_version >= 2) &&
+	      (rtlefuse->eeprom_regulatory != 0)))
+		dont_inc_cck_or_turboscanoff = true;
+
+	if (mac->act_scanning == true) {
+		txagc = 0x3f;
+		if (dont_inc_cck_or_turboscanoff)
+			txagc = pwrlevel;
+	} else {
+		txagc = pwrlevel;
+
+		if (rtlpriv->dm.dynamic_txhighpower_lvl ==
+		    TX_HIGH_PWR_LEVEL_LEVEL1)
+			txagc = 0x10;
+		else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
+			TX_HIGH_PWR_LEVEL_LEVEL2)
+			txagc = 0x0;
+	}
+
+	if (txagc > RF6052_MAX_TX_PWR)
+		txagc = RF6052_MAX_TX_PWR;
+
+	rtl_set_bbreg(hw, RTXAGC_CCK_MCS32, BTX_AGCRATECCK, txagc);
+
+}
+
+bool rtl92s_phy_rf6052_config(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u32 u4reg_val = 0;
+	u8 rfpath;
+	bool rtstatus = true;
+	struct bb_reg_def *pphyreg;
+
+	/* Initialize RF */
+	for (rfpath = 0; rfpath < rtlphy->num_total_rfpath; rfpath++) {
+
+		pphyreg = &rtlphy->phyreg_def[rfpath];
+
+		/* Store original RFENV control type */
+		switch (rfpath) {
+		case RF90_PATH_A:
+		case RF90_PATH_C:
+			u4reg_val = rtl92s_phy_query_bb_reg(hw,
+							    pphyreg->rfintfs,
+							    BRFSI_RFENV);
+			break;
+		case RF90_PATH_B:
+		case RF90_PATH_D:
+			u4reg_val = rtl92s_phy_query_bb_reg(hw,
+							    pphyreg->rfintfs,
+							    BRFSI_RFENV << 16);
+			break;
+		}
+
+		/* Set RF_ENV enable */
+		rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfe,
+				      BRFSI_RFENV << 16, 0x1);
+
+		/* Set RF_ENV output high */
+		rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfo, BRFSI_RFENV, 0x1);
+
+		/* Set bit number of Address and Data for RF register */
+		rtl92s_phy_set_bb_reg(hw, pphyreg->rfhssi_para2,
+				B3WIRE_ADDRESSLENGTH, 0x0);
+		rtl92s_phy_set_bb_reg(hw, pphyreg->rfhssi_para2,
+				B3WIRE_DATALENGTH, 0x0);
+
+		/* Initialize RF fom connfiguration file */
+		switch (rfpath) {
+		case RF90_PATH_A:
+			rtstatus = rtl92s_phy_config_rf(hw,
+						(enum radio_path)rfpath);
+			break;
+		case RF90_PATH_B:
+			rtstatus = rtl92s_phy_config_rf(hw,
+						(enum radio_path)rfpath);
+			break;
+		case RF90_PATH_C:
+			break;
+		case RF90_PATH_D:
+			break;
+		}
+
+		/* Restore RFENV control type */
+		switch (rfpath) {
+		case RF90_PATH_A:
+		case RF90_PATH_C:
+			rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfs, BRFSI_RFENV,
+					      u4reg_val);
+			break;
+		case RF90_PATH_B:
+		case RF90_PATH_D:
+			rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfs,
+					      BRFSI_RFENV << 16,
+					      u4reg_val);
+			break;
+		}
+
+		if (rtstatus != true) {
+			printk(KERN_ERR "Radio[%d] Fail!!", rfpath);
+			goto fail;
+		}
+
+	}
+
+	return rtstatus;
+
+fail:
+	return rtstatus;
+}
+
+void rtl92s_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	switch (bandwidth) {
+	case HT_CHANNEL_WIDTH_20:
+		rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
+					   0xfffff3ff) | 0x0400);
+		rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
+					rtlphy->rfreg_chnlval[0]);
+		break;
+	case HT_CHANNEL_WIDTH_20_40:
+		rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
+					    0xfffff3ff));
+		rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
+					rtlphy->rfreg_chnlval[0]);
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("unknown bandwidth: %#X\n",
+			 bandwidth));
+		break;
+	}
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/rf.h b/drivers/net/wireless/rtlwifi/rtl8192se/rf.h
new file mode 100644
index 00000000000..3843baa1a87
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/rf.h
@@ -0,0 +1,43 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+#ifndef __INC_RTL92S_RF_H
+#define __INC_RTL92S_RF_H
+
+#define	RF6052_MAX_TX_PWR	0x3F
+
+void rtl92s_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw,
+				     u8 bandwidth);
+bool rtl92s_phy_rf6052_config(struct ieee80211_hw *hw) ;
+void rtl92s_phy_rf6052_set_ccktxpower(struct ieee80211_hw *hw,
+				      u8 powerlevel);
+void rtl92s_phy_rf6052_set_ofdmtxpower(struct ieee80211_hw *hw,
+				       u8 *p_pwrlevel, u8 chnl);
+
+#endif
+
-- 
cgit v1.2.3


From 5a183eec6247d3d992afbd3a1a9658571d9c4970 Mon Sep 17 00:00:00 2001
From: Chaoming Li <chaoming_li@realsil.com.cn>
Date: Tue, 3 May 2011 09:49:06 -0500
Subject: rtlwifi: rtl8192se: Merge main (sw) routines

Merge routines sw.c and sw.h for RTL8192SE.

Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8192se/sw.c | 421 ++++++++++++++++++++++++++++
 drivers/net/wireless/rtlwifi/rtl8192se/sw.h |  36 +++
 2 files changed, 457 insertions(+)
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8192se/sw.c
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8192se/sw.h

diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
new file mode 100644
index 00000000000..c5351b65b33
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
@@ -0,0 +1,421 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include <linux/vmalloc.h>
+
+#include "../wifi.h"
+#include "../core.h"
+#include "../pci.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "dm.h"
+#include "fw.h"
+#include "hw.h"
+#include "sw.h"
+#include "trx.h"
+#include "led.h"
+
+static void rtl92s_init_aspm_vars(struct ieee80211_hw *hw)
+{
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	/*close ASPM for AMD defaultly */
+	rtlpci->const_amdpci_aspm = 0;
+
+	/*
+	 * ASPM PS mode.
+	 * 0 - Disable ASPM,
+	 * 1 - Enable ASPM without Clock Req,
+	 * 2 - Enable ASPM with Clock Req,
+	 * 3 - Alwyas Enable ASPM with Clock Req,
+	 * 4 - Always Enable ASPM without Clock Req.
+	 * set defult to RTL8192CE:3 RTL8192E:2
+	 * */
+	rtlpci->const_pci_aspm = 2;
+
+	/*Setting for PCI-E device */
+	rtlpci->const_devicepci_aspm_setting = 0x03;
+
+	/*Setting for PCI-E bridge */
+	rtlpci->const_hostpci_aspm_setting = 0x02;
+
+	/*
+	 * In Hw/Sw Radio Off situation.
+	 * 0 - Default,
+	 * 1 - From ASPM setting without low Mac Pwr,
+	 * 2 - From ASPM setting with low Mac Pwr,
+	 * 3 - Bus D3
+	 * set default to RTL8192CE:0 RTL8192SE:2
+	 */
+	rtlpci->const_hwsw_rfoff_d3 = 2;
+
+	/*
+	 * This setting works for those device with
+	 * backdoor ASPM setting such as EPHY setting.
+	 * 0 - Not support ASPM,
+	 * 1 - Support ASPM,
+	 * 2 - According to chipset.
+	 */
+	rtlpci->const_support_pciaspm = 2;
+}
+
+static int rtl92s_init_sw_vars(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	const struct firmware *firmware;
+	struct rt_firmware *pfirmware = NULL;
+	int err = 0;
+	u16 earlyrxthreshold = 7;
+
+	rtlpriv->dm.dm_initialgain_enable = 1;
+	rtlpriv->dm.dm_flag = 0;
+	rtlpriv->dm.disable_framebursting = 0;
+	rtlpriv->dm.thermalvalue = 0;
+	rtlpriv->dm.useramask = true;
+
+	/* compatible 5G band 91se just 2.4G band & smsp */
+	rtlpriv->rtlhal.current_bandtype = BAND_ON_2_4G;
+	rtlpriv->rtlhal.bandset = BAND_ON_2_4G;
+	rtlpriv->rtlhal.macphymode = SINGLEMAC_SINGLEPHY;
+
+	rtlpci->transmit_config = 0;
+
+	rtlpci->receive_config =
+			RCR_APPFCS |
+			RCR_APWRMGT |
+			/*RCR_ADD3 |*/
+			RCR_AMF	|
+			RCR_ADF |
+			RCR_APP_MIC |
+			RCR_APP_ICV |
+			RCR_AICV |
+			/* Accept ICV error, CRC32 Error */
+			RCR_ACRC32 |
+			RCR_AB |
+			/* Accept Broadcast, Multicast */
+			RCR_AM	|
+			/* Accept Physical match */
+			RCR_APM |
+			/* Accept Destination Address packets */
+			/*RCR_AAP |*/
+			RCR_APP_PHYST_STAFF |
+			/* Accept PHY status */
+			RCR_APP_PHYST_RXFF |
+			(earlyrxthreshold << RCR_FIFO_OFFSET);
+
+	rtlpci->irq_mask[0] = (u32)
+			(IMR_ROK |
+			IMR_VODOK |
+			IMR_VIDOK |
+			IMR_BEDOK |
+			IMR_BKDOK |
+			IMR_HCCADOK |
+			IMR_MGNTDOK |
+			IMR_COMDOK |
+			IMR_HIGHDOK |
+			IMR_BDOK |
+			IMR_RXCMDOK |
+			/*IMR_TIMEOUT0 |*/
+			IMR_RDU |
+			IMR_RXFOVW	|
+			IMR_BCNINT
+			/*| IMR_TXFOVW*/
+			/*| IMR_TBDOK |
+			IMR_TBDER*/);
+
+	rtlpci->irq_mask[1] = (u32) 0;
+
+	rtlpci->shortretry_limit = 0x30;
+	rtlpci->longretry_limit = 0x30;
+
+	rtlpci->first_init = true;
+
+	/* for LPS & IPS */
+	rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps;
+	rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
+	rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps;
+	rtlpriv->psc.reg_fwctrl_lps = 3;
+	rtlpriv->psc.reg_max_lps_awakeintvl = 5;
+	/* for ASPM, you can close aspm through
+	 * set const_support_pciaspm = 0 */
+	rtl92s_init_aspm_vars(hw);
+
+	if (rtlpriv->psc.reg_fwctrl_lps == 1)
+		rtlpriv->psc.fwctrl_psmode = FW_PS_MIN_MODE;
+	else if (rtlpriv->psc.reg_fwctrl_lps == 2)
+		rtlpriv->psc.fwctrl_psmode = FW_PS_MAX_MODE;
+	else if (rtlpriv->psc.reg_fwctrl_lps == 3)
+		rtlpriv->psc.fwctrl_psmode = FW_PS_DTIM_MODE;
+
+	/* for firmware buf */
+	rtlpriv->rtlhal.pfirmware = vzalloc(sizeof(struct rt_firmware));
+	if (!rtlpriv->rtlhal.pfirmware) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("Can't alloc buffer for fw.\n"));
+		return 1;
+	}
+
+	/* request fw */
+	err = request_firmware(&firmware, rtlpriv->cfg->fw_name,
+			rtlpriv->io.dev);
+	if (err) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("Failed to request firmware!\n"));
+		return 1;
+	}
+	if (firmware->size > sizeof(struct rt_firmware)) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("Firmware is too big!\n"));
+		release_firmware(firmware);
+		return 1;
+	}
+
+	pfirmware = (struct rt_firmware *)rtlpriv->rtlhal.pfirmware;
+	memcpy(pfirmware->sz_fw_tmpbuffer, firmware->data, firmware->size);
+	pfirmware->sz_fw_tmpbufferlen = firmware->size;
+	release_firmware(firmware);
+
+	return err;
+}
+
+static void rtl92s_deinit_sw_vars(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	if (rtlpriv->rtlhal.pfirmware) {
+		vfree(rtlpriv->rtlhal.pfirmware);
+		rtlpriv->rtlhal.pfirmware = NULL;
+	}
+}
+
+static struct rtl_hal_ops rtl8192se_hal_ops = {
+	.init_sw_vars = rtl92s_init_sw_vars,
+	.deinit_sw_vars = rtl92s_deinit_sw_vars,
+	.read_eeprom_info = rtl92se_read_eeprom_info,
+	.interrupt_recognized = rtl92se_interrupt_recognized,
+	.hw_init = rtl92se_hw_init,
+	.hw_disable = rtl92se_card_disable,
+	.hw_suspend = rtl92se_suspend,
+	.hw_resume = rtl92se_resume,
+	.enable_interrupt = rtl92se_enable_interrupt,
+	.disable_interrupt = rtl92se_disable_interrupt,
+	.set_network_type = rtl92se_set_network_type,
+	.set_chk_bssid = rtl92se_set_check_bssid,
+	.set_qos = rtl92se_set_qos,
+	.set_bcn_reg = rtl92se_set_beacon_related_registers,
+	.set_bcn_intv = rtl92se_set_beacon_interval,
+	.update_interrupt_mask = rtl92se_update_interrupt_mask,
+	.get_hw_reg = rtl92se_get_hw_reg,
+	.set_hw_reg = rtl92se_set_hw_reg,
+	.update_rate_tbl = rtl92se_update_hal_rate_tbl,
+	.fill_tx_desc = rtl92se_tx_fill_desc,
+	.fill_tx_cmddesc = rtl92se_tx_fill_cmddesc,
+	.query_rx_desc = rtl92se_rx_query_desc,
+	.set_channel_access = rtl92se_update_channel_access_setting,
+	.radio_onoff_checking = rtl92se_gpio_radio_on_off_checking,
+	.set_bw_mode = rtl92s_phy_set_bw_mode,
+	.switch_channel = rtl92s_phy_sw_chnl,
+	.dm_watchdog = rtl92s_dm_watchdog,
+	.scan_operation_backup = rtl92s_phy_scan_operation_backup,
+	.set_rf_power_state = rtl92s_phy_set_rf_power_state,
+	.led_control = rtl92se_led_control,
+	.set_desc = rtl92se_set_desc,
+	.get_desc = rtl92se_get_desc,
+	.tx_polling = rtl92se_tx_polling,
+	.enable_hw_sec = rtl92se_enable_hw_security_config,
+	.set_key = rtl92se_set_key,
+	.init_sw_leds = rtl92se_init_sw_leds,
+	.get_bbreg = rtl92s_phy_query_bb_reg,
+	.set_bbreg = rtl92s_phy_set_bb_reg,
+	.get_rfreg = rtl92s_phy_query_rf_reg,
+	.set_rfreg = rtl92s_phy_set_rf_reg,
+};
+
+static struct rtl_mod_params rtl92se_mod_params = {
+	.sw_crypto = false,
+	.inactiveps = true,
+	.swctrl_lps = true,
+	.fwctrl_lps = false,
+};
+
+/* Because memory R/W bursting will cause system hang/crash
+ * for 92se, so we don't read back after every write action */
+static struct rtl_hal_cfg rtl92se_hal_cfg = {
+	.bar_id = 1,
+	.write_readback = false,
+	.name = "rtl92s_pci",
+	.fw_name = "rtlwifi/rtl8192sefw.bin",
+	.ops = &rtl8192se_hal_ops,
+	.mod_params = &rtl92se_mod_params,
+
+	.maps[SYS_ISO_CTRL] = REG_SYS_ISO_CTRL,
+	.maps[SYS_FUNC_EN] = REG_SYS_FUNC_EN,
+	.maps[SYS_CLK] = SYS_CLKR,
+	.maps[MAC_RCR_AM] = RCR_AM,
+	.maps[MAC_RCR_AB] = RCR_AB,
+	.maps[MAC_RCR_ACRC32] = RCR_ACRC32,
+	.maps[MAC_RCR_ACF] = RCR_ACF,
+	.maps[MAC_RCR_AAP] = RCR_AAP,
+
+	.maps[EFUSE_TEST] = REG_EFUSE_TEST,
+	.maps[EFUSE_CTRL] = REG_EFUSE_CTRL,
+	.maps[EFUSE_CLK] = REG_EFUSE_CLK,
+	.maps[EFUSE_CLK_CTRL] = REG_EFUSE_CTRL,
+	.maps[EFUSE_PWC_EV12V] = 0, /* nouse for 8192se */
+	.maps[EFUSE_FEN_ELDR] = 0, /* nouse for 8192se */
+	.maps[EFUSE_LOADER_CLK_EN] = 0,/* nouse for 8192se */
+	.maps[EFUSE_ANA8M] = EFUSE_ANA8M,
+	.maps[EFUSE_HWSET_MAX_SIZE] = HWSET_MAX_SIZE_92S,
+	.maps[EFUSE_MAX_SECTION_MAP] = EFUSE_MAX_SECTION,
+	.maps[EFUSE_REAL_CONTENT_SIZE] = EFUSE_REAL_CONTENT_LEN,
+
+	.maps[RWCAM] = REG_RWCAM,
+	.maps[WCAMI] = REG_WCAMI,
+	.maps[RCAMO] = REG_RCAMO,
+	.maps[CAMDBG] = REG_CAMDBG,
+	.maps[SECR] = REG_SECR,
+	.maps[SEC_CAM_NONE] = CAM_NONE,
+	.maps[SEC_CAM_WEP40] = CAM_WEP40,
+	.maps[SEC_CAM_TKIP] = CAM_TKIP,
+	.maps[SEC_CAM_AES] = CAM_AES,
+	.maps[SEC_CAM_WEP104] = CAM_WEP104,
+
+	.maps[RTL_IMR_BCNDMAINT6] = IMR_BCNDMAINT6,
+	.maps[RTL_IMR_BCNDMAINT5] = IMR_BCNDMAINT5,
+	.maps[RTL_IMR_BCNDMAINT4] = IMR_BCNDMAINT4,
+	.maps[RTL_IMR_BCNDMAINT3] = IMR_BCNDMAINT3,
+	.maps[RTL_IMR_BCNDMAINT2] = IMR_BCNDMAINT2,
+	.maps[RTL_IMR_BCNDMAINT1] = IMR_BCNDMAINT1,
+	.maps[RTL_IMR_BCNDOK8] = IMR_BCNDOK8,
+	.maps[RTL_IMR_BCNDOK7] = IMR_BCNDOK7,
+	.maps[RTL_IMR_BCNDOK6] = IMR_BCNDOK6,
+	.maps[RTL_IMR_BCNDOK5] = IMR_BCNDOK5,
+	.maps[RTL_IMR_BCNDOK4] = IMR_BCNDOK4,
+	.maps[RTL_IMR_BCNDOK3] = IMR_BCNDOK3,
+	.maps[RTL_IMR_BCNDOK2] = IMR_BCNDOK2,
+	.maps[RTL_IMR_BCNDOK1] = IMR_BCNDOK1,
+	.maps[RTL_IMR_TIMEOUT2] = IMR_TIMEOUT2,
+	.maps[RTL_IMR_TIMEOUT1] = IMR_TIMEOUT1,
+
+	.maps[RTL_IMR_TXFOVW] = IMR_TXFOVW,
+	.maps[RTL_IMR_PSTIMEOUT] = IMR_PSTIMEOUT,
+	.maps[RTL_IMR_BcnInt] = IMR_BCNINT,
+	.maps[RTL_IMR_RXFOVW] = IMR_RXFOVW,
+	.maps[RTL_IMR_RDU] = IMR_RDU,
+	.maps[RTL_IMR_ATIMEND] = IMR_ATIMEND,
+	.maps[RTL_IMR_BDOK] = IMR_BDOK,
+	.maps[RTL_IMR_MGNTDOK] = IMR_MGNTDOK,
+	.maps[RTL_IMR_TBDER] = IMR_TBDER,
+	.maps[RTL_IMR_HIGHDOK] = IMR_HIGHDOK,
+	.maps[RTL_IMR_COMDOK] = IMR_COMDOK,
+	.maps[RTL_IMR_TBDOK] = IMR_TBDOK,
+	.maps[RTL_IMR_BKDOK] = IMR_BKDOK,
+	.maps[RTL_IMR_BEDOK] = IMR_BEDOK,
+	.maps[RTL_IMR_VIDOK] = IMR_VIDOK,
+	.maps[RTL_IMR_VODOK] = IMR_VODOK,
+	.maps[RTL_IMR_ROK] = IMR_ROK,
+	.maps[RTL_IBSS_INT_MASKS] = (IMR_BCNINT | IMR_TBDOK | IMR_TBDER),
+
+	.maps[RTL_RC_CCK_RATE1M] = DESC92S_RATE1M,
+	.maps[RTL_RC_CCK_RATE2M] = DESC92S_RATE2M,
+	.maps[RTL_RC_CCK_RATE5_5M] = DESC92S_RATE5_5M,
+	.maps[RTL_RC_CCK_RATE11M] = DESC92S_RATE11M,
+	.maps[RTL_RC_OFDM_RATE6M] = DESC92S_RATE6M,
+	.maps[RTL_RC_OFDM_RATE9M] = DESC92S_RATE9M,
+	.maps[RTL_RC_OFDM_RATE12M] = DESC92S_RATE12M,
+	.maps[RTL_RC_OFDM_RATE18M] = DESC92S_RATE18M,
+	.maps[RTL_RC_OFDM_RATE24M] = DESC92S_RATE24M,
+	.maps[RTL_RC_OFDM_RATE36M] = DESC92S_RATE36M,
+	.maps[RTL_RC_OFDM_RATE48M] = DESC92S_RATE48M,
+	.maps[RTL_RC_OFDM_RATE54M] = DESC92S_RATE54M,
+
+	.maps[RTL_RC_HT_RATEMCS7] = DESC92S_RATEMCS7,
+	.maps[RTL_RC_HT_RATEMCS15] = DESC92S_RATEMCS15,
+};
+
+static struct pci_device_id rtl92se_pci_ids[] __devinitdata = {
+	{RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8192, rtl92se_hal_cfg)},
+	{RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8171, rtl92se_hal_cfg)},
+	{RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8172, rtl92se_hal_cfg)},
+	{RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8173, rtl92se_hal_cfg)},
+	{RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8174, rtl92se_hal_cfg)},
+	{},
+};
+
+MODULE_DEVICE_TABLE(pci, rtl92se_pci_ids);
+
+MODULE_AUTHOR("lizhaoming	<chaoming_li@realsil.com.cn>");
+MODULE_AUTHOR("Realtek WlanFAE	<wlanfae@realtek.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Realtek 8192S/8191S 802.11n PCI wireless");
+MODULE_FIRMWARE("rtlwifi/rtl8192sefw.bin");
+
+module_param_named(swenc, rtl92se_mod_params.sw_crypto, bool, 0444);
+module_param_named(ips, rtl92se_mod_params.inactiveps, bool, 0444);
+module_param_named(swlps, rtl92se_mod_params.swctrl_lps, bool, 0444);
+module_param_named(fwlps, rtl92se_mod_params.fwctrl_lps, bool, 0444);
+MODULE_PARM_DESC(swenc, "using hardware crypto (default 0 [hardware])\n");
+MODULE_PARM_DESC(ips, "using no link power save (default 1 is open)\n");
+MODULE_PARM_DESC(swlps, "using linked sw control power save (default 1 is "
+		 "open)\n");
+
+
+static struct pci_driver rtl92se_driver = {
+	.name = KBUILD_MODNAME,
+	.id_table = rtl92se_pci_ids,
+	.probe = rtl_pci_probe,
+	.remove = rtl_pci_disconnect,
+
+#ifdef CONFIG_PM
+	.suspend = rtl_pci_suspend,
+	.resume = rtl_pci_resume,
+#endif
+
+};
+
+static int __init rtl92se_module_init(void)
+{
+	int ret = 0;
+
+	ret = pci_register_driver(&rtl92se_driver);
+	if (ret)
+		RT_ASSERT(false, (": No device found\n"));
+
+	return ret;
+}
+
+static void __exit rtl92se_module_exit(void)
+{
+	pci_unregister_driver(&rtl92se_driver);
+}
+
+module_init(rtl92se_module_init);
+module_exit(rtl92se_module_exit);
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/sw.h b/drivers/net/wireless/rtlwifi/rtl8192se/sw.h
new file mode 100644
index 00000000000..fc4eb285a0a
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/sw.h
@@ -0,0 +1,36 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ *****************************************************************************/
+#ifndef __REALTEK_PCI92SE_SW_H__
+#define __REALTEK_PCI92SE_SW_H__
+
+#define EFUSE_MAX_SECTION	16
+
+int rtl92se_init_sw(struct ieee80211_hw *hw);
+void rtl92se_deinit_sw(struct ieee80211_hw *hw);
+void rtl92se_init_var_map(struct ieee80211_hw *hw);
+
+#endif
-- 
cgit v1.2.3


From 18906ae27d233914d54f41e5fcf3fdfdf2fb69a9 Mon Sep 17 00:00:00 2001
From: Chaoming Li <chaoming_li@realsil.com.cn>
Date: Tue, 3 May 2011 09:49:16 -0500
Subject: rtlwifi: rtl8192se: Merge table routines

Merge routines table.c and table.h for RTL8192SE.

Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8192se/table.c | 634 +++++++++++++++++++++++++
 drivers/net/wireless/rtlwifi/rtl8192se/table.h |  49 ++
 2 files changed, 683 insertions(+)
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8192se/table.c
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8192se/table.h

diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/table.c b/drivers/net/wireless/rtlwifi/rtl8192se/table.c
new file mode 100644
index 00000000000..154185b3969
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/table.c
@@ -0,0 +1,634 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ * Created on  2010/ 5/18,  1:41
+ *****************************************************************************/
+
+#include "table.h"
+
+u32 rtl8192sephy_reg_2t2rarray[PHY_REG_2T2RARRAYLENGTH] = {
+	0x01c, 0x07000000,
+	0x800, 0x00040000,
+	0x804, 0x00008003,
+	0x808, 0x0000fc00,
+	0x80c, 0x0000000a,
+	0x810, 0x10005088,
+	0x814, 0x020c3d10,
+	0x818, 0x00200185,
+	0x81c, 0x00000000,
+	0x820, 0x01000000,
+	0x824, 0x00390004,
+	0x828, 0x01000000,
+	0x82c, 0x00390004,
+	0x830, 0x00000004,
+	0x834, 0x00690200,
+	0x838, 0x00000004,
+	0x83c, 0x00690200,
+	0x840, 0x00010000,
+	0x844, 0x00010000,
+	0x848, 0x00000000,
+	0x84c, 0x00000000,
+	0x850, 0x00000000,
+	0x854, 0x00000000,
+	0x858, 0x48484848,
+	0x85c, 0x65a965a9,
+	0x860, 0x0f7f0130,
+	0x864, 0x0f7f0130,
+	0x868, 0x0f7f0130,
+	0x86c, 0x0f7f0130,
+	0x870, 0x03000700,
+	0x874, 0x03000300,
+	0x878, 0x00020002,
+	0x87c, 0x004f0201,
+	0x880, 0xa8300ac1,
+	0x884, 0x00000058,
+	0x888, 0x00000008,
+	0x88c, 0x00000004,
+	0x890, 0x00000000,
+	0x894, 0xfffffffe,
+	0x898, 0x40302010,
+	0x89c, 0x00706050,
+	0x8b0, 0x00000000,
+	0x8e0, 0x00000000,
+	0x8e4, 0x00000000,
+	0xe00, 0x30333333,
+	0xe04, 0x2a2d2e2f,
+	0xe08, 0x00003232,
+	0xe10, 0x30333333,
+	0xe14, 0x2a2d2e2f,
+	0xe18, 0x30333333,
+	0xe1c, 0x2a2d2e2f,
+	0xe30, 0x01007c00,
+	0xe34, 0x01004800,
+	0xe38, 0x1000dc1f,
+	0xe3c, 0x10008c1f,
+	0xe40, 0x021400a0,
+	0xe44, 0x281600a0,
+	0xe48, 0xf8000001,
+	0xe4c, 0x00002910,
+	0xe50, 0x01007c00,
+	0xe54, 0x01004800,
+	0xe58, 0x1000dc1f,
+	0xe5c, 0x10008c1f,
+	0xe60, 0x021400a0,
+	0xe64, 0x281600a0,
+	0xe6c, 0x00002910,
+	0xe70, 0x31ed92fb,
+	0xe74, 0x361536fb,
+	0xe78, 0x361536fb,
+	0xe7c, 0x361536fb,
+	0xe80, 0x361536fb,
+	0xe84, 0x000d92fb,
+	0xe88, 0x000d92fb,
+	0xe8c, 0x31ed92fb,
+	0xed0, 0x31ed92fb,
+	0xed4, 0x31ed92fb,
+	0xed8, 0x000d92fb,
+	0xedc, 0x000d92fb,
+	0xee0, 0x000d92fb,
+	0xee4, 0x015e5448,
+	0xee8, 0x21555448,
+	0x900, 0x00000000,
+	0x904, 0x00000023,
+	0x908, 0x00000000,
+	0x90c, 0x01121313,
+	0xa00, 0x00d047c8,
+	0xa04, 0x80ff0008,
+	0xa08, 0x8ccd8300,
+	0xa0c, 0x2e62120f,
+	0xa10, 0x9500bb78,
+	0xa14, 0x11144028,
+	0xa18, 0x00881117,
+	0xa1c, 0x89140f00,
+	0xa20, 0x1a1b0000,
+	0xa24, 0x090e1317,
+	0xa28, 0x00000204,
+	0xa2c, 0x10d30000,
+	0xc00, 0x40071d40,
+	0xc04, 0x00a05633,
+	0xc08, 0x000000e4,
+	0xc0c, 0x6c6c6c6c,
+	0xc10, 0x08800000,
+	0xc14, 0x40000100,
+	0xc18, 0x08000000,
+	0xc1c, 0x40000100,
+	0xc20, 0x08000000,
+	0xc24, 0x40000100,
+	0xc28, 0x08000000,
+	0xc2c, 0x40000100,
+	0xc30, 0x6de9ac44,
+	0xc34, 0x469652cf,
+	0xc38, 0x49795994,
+	0xc3c, 0x0a979764,
+	0xc40, 0x1f7c403f,
+	0xc44, 0x000100b7,
+	0xc48, 0xec020000,
+	0xc4c, 0x007f037f,
+	0xc50, 0x69543420,
+	0xc54, 0x433c0094,
+	0xc58, 0x69543420,
+	0xc5c, 0x433c0094,
+	0xc60, 0x69543420,
+	0xc64, 0x433c0094,
+	0xc68, 0x69543420,
+	0xc6c, 0x433c0094,
+	0xc70, 0x2c7f000d,
+	0xc74, 0x0186155b,
+	0xc78, 0x0000001f,
+	0xc7c, 0x00b91612,
+	0xc80, 0x40000100,
+	0xc84, 0x20f60000,
+	0xc88, 0x20000080,
+	0xc8c, 0x20200000,
+	0xc90, 0x40000100,
+	0xc94, 0x00000000,
+	0xc98, 0x40000100,
+	0xc9c, 0x00000000,
+	0xca0, 0x00492492,
+	0xca4, 0x00000000,
+	0xca8, 0x00000000,
+	0xcac, 0x00000000,
+	0xcb0, 0x00000000,
+	0xcb4, 0x00000000,
+	0xcb8, 0x00000000,
+	0xcbc, 0x28000000,
+	0xcc0, 0x00000000,
+	0xcc4, 0x00000000,
+	0xcc8, 0x00000000,
+	0xccc, 0x00000000,
+	0xcd0, 0x00000000,
+	0xcd4, 0x00000000,
+	0xcd8, 0x64b22427,
+	0xcdc, 0x00766932,
+	0xce0, 0x00222222,
+	0xce4, 0x00000000,
+	0xce8, 0x37644302,
+	0xcec, 0x2f97d40c,
+	0xd00, 0x00000750,
+	0xd04, 0x00000403,
+	0xd08, 0x0000907f,
+	0xd0c, 0x00000001,
+	0xd10, 0xa0633333,
+	0xd14, 0x33333c63,
+	0xd18, 0x6a8f5b6b,
+	0xd1c, 0x00000000,
+	0xd20, 0x00000000,
+	0xd24, 0x00000000,
+	0xd28, 0x00000000,
+	0xd2c, 0xcc979975,
+	0xd30, 0x00000000,
+	0xd34, 0x00000000,
+	0xd38, 0x00000000,
+	0xd3c, 0x00027293,
+	0xd40, 0x00000000,
+	0xd44, 0x00000000,
+	0xd48, 0x00000000,
+	0xd50, 0x6437140a,
+	0xd54, 0x024dbd02,
+	0xd58, 0x00000000,
+	0xd5c, 0x30032064,
+	0xd60, 0x4653de68,
+	0xd64, 0x00518a3c,
+	0xd68, 0x00002101,
+	0xf14, 0x00000003,
+	0xf4c, 0x00000000,
+	0xf00, 0x00000300,
+};
+
+u32 rtl8192sephy_changeto_1t1rarray[PHY_CHANGETO_1T1RARRAYLENGTH] = {
+	0x844, 0xffffffff, 0x00010000,
+	0x804, 0x0000000f, 0x00000001,
+	0x824, 0x00f0000f, 0x00300004,
+	0x82c, 0x00f0000f, 0x00100002,
+	0x870, 0x04000000, 0x00000001,
+	0x864, 0x00000400, 0x00000000,
+	0x878, 0x000f000f, 0x00000002,
+	0xe74, 0x0f000000, 0x00000002,
+	0xe78, 0x0f000000, 0x00000002,
+	0xe7c, 0x0f000000, 0x00000002,
+	0xe80, 0x0f000000, 0x00000002,
+	0x90c, 0x000000ff, 0x00000011,
+	0xc04, 0x000000ff, 0x00000011,
+	0xd04, 0x0000000f, 0x00000001,
+	0x1f4, 0xffff0000, 0x00007777,
+	0x234, 0xf8000000, 0x0000000a,
+};
+
+u32 rtl8192sephy_changeto_1t2rarray[PHY_CHANGETO_1T2RARRAYLENGTH] = {
+	0x804, 0x0000000f, 0x00000003,
+	0x824, 0x00f0000f, 0x00300004,
+	0x82c, 0x00f0000f, 0x00300002,
+	0x870, 0x04000000, 0x00000001,
+	0x864, 0x00000400, 0x00000000,
+	0x878, 0x000f000f, 0x00000002,
+	0xe74, 0x0f000000, 0x00000002,
+	0xe78, 0x0f000000, 0x00000002,
+	0xe7c, 0x0f000000, 0x00000002,
+	0xe80, 0x0f000000, 0x00000002,
+	0x90c, 0x000000ff, 0x00000011,
+	0xc04, 0x000000ff, 0x00000033,
+	0xd04, 0x0000000f, 0x00000003,
+	0x1f4, 0xffff0000, 0x00007777,
+	0x234, 0xf8000000, 0x0000000a,
+};
+
+u32 rtl8192sephy_reg_array_pg[PHY_REG_ARRAY_PGLENGTH] = {
+	0xe00, 0xffffffff, 0x06090909,
+	0xe04, 0xffffffff, 0x00030406,
+	0xe08, 0x0000ff00, 0x00000000,
+	0xe10, 0xffffffff, 0x0a0c0d0e,
+	0xe14, 0xffffffff, 0x04070809,
+	0xe18, 0xffffffff, 0x0a0c0d0e,
+	0xe1c, 0xffffffff, 0x04070809,
+	0xe00, 0xffffffff, 0x04040404,
+	0xe04, 0xffffffff, 0x00020204,
+	0xe08, 0x0000ff00, 0x00000000,
+	0xe10, 0xffffffff, 0x02040404,
+	0xe14, 0xffffffff, 0x00000002,
+	0xe18, 0xffffffff, 0x02040404,
+	0xe1c, 0xffffffff, 0x00000002,
+	0xe00, 0xffffffff, 0x04040404,
+	0xe04, 0xffffffff, 0x00020204,
+	0xe08, 0x0000ff00, 0x00000000,
+	0xe10, 0xffffffff, 0x02040404,
+	0xe14, 0xffffffff, 0x00000002,
+	0xe18, 0xffffffff, 0x02040404,
+	0xe1c, 0xffffffff, 0x00000002,
+	0xe00, 0xffffffff, 0x02020202,
+	0xe04, 0xffffffff, 0x00020202,
+	0xe08, 0x0000ff00, 0x00000000,
+	0xe10, 0xffffffff, 0x02020202,
+	0xe14, 0xffffffff, 0x00000002,
+	0xe18, 0xffffffff, 0x02020202,
+	0xe1c, 0xffffffff, 0x00000002,
+};
+
+u32 rtl8192seradioa_1t_array[RADIOA_1T_ARRAYLENGTH] = {
+	0x000, 0x00030159,
+	0x001, 0x00030250,
+	0x002, 0x00010000,
+	0x010, 0x0008000f,
+	0x011, 0x000231fc,
+	0x010, 0x000c000f,
+	0x011, 0x0003f9f8,
+	0x010, 0x0002000f,
+	0x011, 0x00020101,
+	0x014, 0x0001093e,
+	0x014, 0x0009093e,
+	0x015, 0x0000f8f4,
+	0x017, 0x000f6500,
+	0x01a, 0x00013056,
+	0x01b, 0x00060000,
+	0x01c, 0x00000300,
+	0x01e, 0x00031059,
+	0x021, 0x00054000,
+	0x022, 0x0000083c,
+	0x023, 0x00001558,
+	0x024, 0x00000060,
+	0x025, 0x00022583,
+	0x026, 0x0000f200,
+	0x027, 0x000eacf1,
+	0x028, 0x0009bd54,
+	0x029, 0x00004582,
+	0x02a, 0x00000001,
+	0x02b, 0x00021334,
+	0x02a, 0x00000000,
+	0x02b, 0x0000000a,
+	0x02a, 0x00000001,
+	0x02b, 0x00000808,
+	0x02b, 0x00053333,
+	0x02c, 0x0000000c,
+	0x02a, 0x00000002,
+	0x02b, 0x00000808,
+	0x02b, 0x0005b333,
+	0x02c, 0x0000000d,
+	0x02a, 0x00000003,
+	0x02b, 0x00000808,
+	0x02b, 0x00063333,
+	0x02c, 0x0000000d,
+	0x02a, 0x00000004,
+	0x02b, 0x00000808,
+	0x02b, 0x0006b333,
+	0x02c, 0x0000000d,
+	0x02a, 0x00000005,
+	0x02b, 0x00000709,
+	0x02b, 0x00053333,
+	0x02c, 0x0000000d,
+	0x02a, 0x00000006,
+	0x02b, 0x00000709,
+	0x02b, 0x0005b333,
+	0x02c, 0x0000000d,
+	0x02a, 0x00000007,
+	0x02b, 0x00000709,
+	0x02b, 0x00063333,
+	0x02c, 0x0000000d,
+	0x02a, 0x00000008,
+	0x02b, 0x00000709,
+	0x02b, 0x0006b333,
+	0x02c, 0x0000000d,
+	0x02a, 0x00000009,
+	0x02b, 0x0000060a,
+	0x02b, 0x00053333,
+	0x02c, 0x0000000d,
+	0x02a, 0x0000000a,
+	0x02b, 0x0000060a,
+	0x02b, 0x0005b333,
+	0x02c, 0x0000000d,
+	0x02a, 0x0000000b,
+	0x02b, 0x0000060a,
+	0x02b, 0x00063333,
+	0x02c, 0x0000000d,
+	0x02a, 0x0000000c,
+	0x02b, 0x0000060a,
+	0x02b, 0x0006b333,
+	0x02c, 0x0000000d,
+	0x02a, 0x0000000d,
+	0x02b, 0x0000050b,
+	0x02b, 0x00053333,
+	0x02c, 0x0000000d,
+	0x02a, 0x0000000e,
+	0x02b, 0x0000050b,
+	0x02b, 0x00066623,
+	0x02c, 0x0000001a,
+	0x02a, 0x000e4000,
+	0x030, 0x00020000,
+	0x031, 0x000b9631,
+	0x032, 0x0000130d,
+	0x033, 0x00000187,
+	0x013, 0x00019e6c,
+	0x013, 0x00015e94,
+	0x000, 0x00010159,
+	0x018, 0x0000f401,
+	0x0fe, 0x00000000,
+	0x01e, 0x0003105b,
+	0x0fe, 0x00000000,
+	0x000, 0x00030159,
+	0x010, 0x0004000f,
+	0x011, 0x000203f9,
+};
+
+u32 rtl8192seradiob_array[RADIOB_ARRAYLENGTH] = {
+	0x000, 0x00030159,
+	0x001, 0x00001041,
+	0x002, 0x00011000,
+	0x005, 0x00080fc0,
+	0x007, 0x000fc803,
+	0x013, 0x00017cb0,
+	0x013, 0x00011cc0,
+	0x013, 0x0000dc60,
+	0x013, 0x00008c60,
+	0x013, 0x00004450,
+	0x013, 0x00000020,
+};
+
+u32 rtl8192seradiob_gm_array[RADIOB_GM_ARRAYLENGTH] = {
+	0x000, 0x00030159,
+	0x001, 0x00001041,
+	0x002, 0x00011000,
+	0x005, 0x00080fc0,
+	0x007, 0x000fc803,
+};
+
+u32 rtl8192semac_2t_array[MAC_2T_ARRAYLENGTH] = {
+	0x020, 0x00000035,
+	0x048, 0x0000000e,
+	0x049, 0x000000f0,
+	0x04a, 0x00000077,
+	0x04b, 0x00000083,
+	0x0b5, 0x00000021,
+	0x0dc, 0x000000ff,
+	0x0dd, 0x000000ff,
+	0x0de, 0x000000ff,
+	0x0df, 0x000000ff,
+	0x116, 0x00000000,
+	0x117, 0x00000000,
+	0x118, 0x00000000,
+	0x119, 0x00000000,
+	0x11a, 0x00000000,
+	0x11b, 0x00000000,
+	0x11c, 0x00000000,
+	0x11d, 0x00000000,
+	0x160, 0x0000000b,
+	0x161, 0x0000000b,
+	0x162, 0x0000000b,
+	0x163, 0x0000000b,
+	0x164, 0x0000000b,
+	0x165, 0x0000000b,
+	0x166, 0x0000000b,
+	0x167, 0x0000000b,
+	0x168, 0x0000000b,
+	0x169, 0x0000000b,
+	0x16a, 0x0000000b,
+	0x16b, 0x0000000b,
+	0x16c, 0x0000000b,
+	0x16d, 0x0000000b,
+	0x16e, 0x0000000b,
+	0x16f, 0x0000000b,
+	0x170, 0x0000000b,
+	0x171, 0x0000000b,
+	0x172, 0x0000000b,
+	0x173, 0x0000000b,
+	0x174, 0x0000000b,
+	0x175, 0x0000000b,
+	0x176, 0x0000000b,
+	0x177, 0x0000000b,
+	0x178, 0x0000000b,
+	0x179, 0x0000000b,
+	0x17a, 0x0000000b,
+	0x17b, 0x0000000b,
+	0x17c, 0x0000000b,
+	0x17d, 0x0000000b,
+	0x17e, 0x0000000b,
+	0x17f, 0x0000000b,
+	0x236, 0x0000000c,
+	0x503, 0x00000022,
+	0x560, 0x00000000,
+};
+
+u32 rtl8192seagctab_array[AGCTAB_ARRAYLENGTH] = {
+	0xc78, 0x7f000001,
+	0xc78, 0x7f010001,
+	0xc78, 0x7e020001,
+	0xc78, 0x7d030001,
+	0xc78, 0x7c040001,
+	0xc78, 0x7b050001,
+	0xc78, 0x7a060001,
+	0xc78, 0x79070001,
+	0xc78, 0x78080001,
+	0xc78, 0x77090001,
+	0xc78, 0x760a0001,
+	0xc78, 0x750b0001,
+	0xc78, 0x740c0001,
+	0xc78, 0x730d0001,
+	0xc78, 0x720e0001,
+	0xc78, 0x710f0001,
+	0xc78, 0x70100001,
+	0xc78, 0x6f110001,
+	0xc78, 0x6f120001,
+	0xc78, 0x6e130001,
+	0xc78, 0x6d140001,
+	0xc78, 0x6d150001,
+	0xc78, 0x6c160001,
+	0xc78, 0x6b170001,
+	0xc78, 0x6a180001,
+	0xc78, 0x6a190001,
+	0xc78, 0x691a0001,
+	0xc78, 0x681b0001,
+	0xc78, 0x671c0001,
+	0xc78, 0x661d0001,
+	0xc78, 0x651e0001,
+	0xc78, 0x641f0001,
+	0xc78, 0x63200001,
+	0xc78, 0x4c210001,
+	0xc78, 0x4b220001,
+	0xc78, 0x4a230001,
+	0xc78, 0x49240001,
+	0xc78, 0x48250001,
+	0xc78, 0x47260001,
+	0xc78, 0x46270001,
+	0xc78, 0x45280001,
+	0xc78, 0x44290001,
+	0xc78, 0x2c2a0001,
+	0xc78, 0x2b2b0001,
+	0xc78, 0x2a2c0001,
+	0xc78, 0x292d0001,
+	0xc78, 0x282e0001,
+	0xc78, 0x272f0001,
+	0xc78, 0x26300001,
+	0xc78, 0x25310001,
+	0xc78, 0x24320001,
+	0xc78, 0x23330001,
+	0xc78, 0x22340001,
+	0xc78, 0x09350001,
+	0xc78, 0x08360001,
+	0xc78, 0x07370001,
+	0xc78, 0x06380001,
+	0xc78, 0x05390001,
+	0xc78, 0x043a0001,
+	0xc78, 0x033b0001,
+	0xc78, 0x023c0001,
+	0xc78, 0x013d0001,
+	0xc78, 0x003e0001,
+	0xc78, 0x003f0001,
+	0xc78, 0x7f400001,
+	0xc78, 0x7f410001,
+	0xc78, 0x7e420001,
+	0xc78, 0x7d430001,
+	0xc78, 0x7c440001,
+	0xc78, 0x7b450001,
+	0xc78, 0x7a460001,
+	0xc78, 0x79470001,
+	0xc78, 0x78480001,
+	0xc78, 0x77490001,
+	0xc78, 0x764a0001,
+	0xc78, 0x754b0001,
+	0xc78, 0x744c0001,
+	0xc78, 0x734d0001,
+	0xc78, 0x724e0001,
+	0xc78, 0x714f0001,
+	0xc78, 0x70500001,
+	0xc78, 0x6f510001,
+	0xc78, 0x6f520001,
+	0xc78, 0x6e530001,
+	0xc78, 0x6d540001,
+	0xc78, 0x6d550001,
+	0xc78, 0x6c560001,
+	0xc78, 0x6b570001,
+	0xc78, 0x6a580001,
+	0xc78, 0x6a590001,
+	0xc78, 0x695a0001,
+	0xc78, 0x685b0001,
+	0xc78, 0x675c0001,
+	0xc78, 0x665d0001,
+	0xc78, 0x655e0001,
+	0xc78, 0x645f0001,
+	0xc78, 0x63600001,
+	0xc78, 0x4c610001,
+	0xc78, 0x4b620001,
+	0xc78, 0x4a630001,
+	0xc78, 0x49640001,
+	0xc78, 0x48650001,
+	0xc78, 0x47660001,
+	0xc78, 0x46670001,
+	0xc78, 0x45680001,
+	0xc78, 0x44690001,
+	0xc78, 0x2c6a0001,
+	0xc78, 0x2b6b0001,
+	0xc78, 0x2a6c0001,
+	0xc78, 0x296d0001,
+	0xc78, 0x286e0001,
+	0xc78, 0x276f0001,
+	0xc78, 0x26700001,
+	0xc78, 0x25710001,
+	0xc78, 0x24720001,
+	0xc78, 0x23730001,
+	0xc78, 0x22740001,
+	0xc78, 0x09750001,
+	0xc78, 0x08760001,
+	0xc78, 0x07770001,
+	0xc78, 0x06780001,
+	0xc78, 0x05790001,
+	0xc78, 0x047a0001,
+	0xc78, 0x037b0001,
+	0xc78, 0x027c0001,
+	0xc78, 0x017d0001,
+	0xc78, 0x007e0001,
+	0xc78, 0x007f0001,
+	0xc78, 0x3000001e,
+	0xc78, 0x3001001e,
+	0xc78, 0x3002001e,
+	0xc78, 0x3003001e,
+	0xc78, 0x3004001e,
+	0xc78, 0x3405001e,
+	0xc78, 0x3806001e,
+	0xc78, 0x3e07001e,
+	0xc78, 0x3e08001e,
+	0xc78, 0x4409001e,
+	0xc78, 0x460a001e,
+	0xc78, 0x480b001e,
+	0xc78, 0x480c001e,
+	0xc78, 0x4e0d001e,
+	0xc78, 0x560e001e,
+	0xc78, 0x5a0f001e,
+	0xc78, 0x5e10001e,
+	0xc78, 0x6211001e,
+	0xc78, 0x6c12001e,
+	0xc78, 0x7213001e,
+	0xc78, 0x7214001e,
+	0xc78, 0x7215001e,
+	0xc78, 0x7216001e,
+	0xc78, 0x7217001e,
+	0xc78, 0x7218001e,
+	0xc78, 0x7219001e,
+	0xc78, 0x721a001e,
+	0xc78, 0x721b001e,
+	0xc78, 0x721c001e,
+	0xc78, 0x721d001e,
+	0xc78, 0x721e001e,
+	0xc78, 0x721f001e,
+};
+
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/table.h b/drivers/net/wireless/rtlwifi/rtl8192se/table.h
new file mode 100644
index 00000000000..b4ed6d951eb
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/table.h
@@ -0,0 +1,49 @@
+/******************************************************************************
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ ******************************************************************************/
+#ifndef __INC_HAL8192SE_FW_IMG_H
+#define __INC_HAL8192SE_FW_IMG_H
+
+#include <linux/types.h>
+
+/*Created on  2010/ 4/12,  5:56*/
+
+#define PHY_REG_2T2RARRAYLENGTH 372
+extern u32 rtl8192sephy_reg_2t2rarray[PHY_REG_2T2RARRAYLENGTH];
+#define PHY_CHANGETO_1T1RARRAYLENGTH 48
+extern u32 rtl8192sephy_changeto_1t1rarray[PHY_CHANGETO_1T1RARRAYLENGTH];
+#define PHY_CHANGETO_1T2RARRAYLENGTH 45
+extern u32 rtl8192sephy_changeto_1t2rarray[PHY_CHANGETO_1T2RARRAYLENGTH];
+#define PHY_REG_ARRAY_PGLENGTH 84
+extern u32 rtl8192sephy_reg_array_pg[PHY_REG_ARRAY_PGLENGTH];
+#define RADIOA_1T_ARRAYLENGTH 202
+extern u32 rtl8192seradioa_1t_array[RADIOA_1T_ARRAYLENGTH];
+#define RADIOB_ARRAYLENGTH 22
+extern u32 rtl8192seradiob_array[RADIOB_ARRAYLENGTH];
+#define RADIOB_GM_ARRAYLENGTH 10
+extern u32 rtl8192seradiob_gm_array[RADIOB_GM_ARRAYLENGTH];
+#define MAC_2T_ARRAYLENGTH 106
+extern u32 rtl8192semac_2t_array[MAC_2T_ARRAYLENGTH];
+#define AGCTAB_ARRAYLENGTH 320
+extern u32 rtl8192seagctab_array[AGCTAB_ARRAYLENGTH];
+
+#endif
+
-- 
cgit v1.2.3


From 84f494cef7d98d67aa7d50ede12784464aa0c274 Mon Sep 17 00:00:00 2001
From: Chaoming Li <chaoming_li@realsil.com.cn>
Date: Tue, 3 May 2011 09:49:26 -0500
Subject: rtlwifi: rtl8192se: Merge TX and RX routines

Merge routines trx.c and trx.h for RTL8192SE.

Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8192se/trx.c | 976 +++++++++++++++++++++++++++
 drivers/net/wireless/rtlwifi/rtl8192se/trx.h |  45 ++
 2 files changed, 1021 insertions(+)
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8192se/trx.c
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8192se/trx.h

diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c
new file mode 100644
index 00000000000..5cf442373d4
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c
@@ -0,0 +1,976 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../pci.h"
+#include "../base.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "fw.h"
+#include "trx.h"
+#include "led.h"
+
+static u8 _rtl92se_map_hwqueue_to_fwqueue(struct sk_buff *skb,	u8 skb_queue)
+{
+	__le16 fc = rtl_get_fc(skb);
+
+	if (unlikely(ieee80211_is_beacon(fc)))
+		return QSLT_BEACON;
+	if (ieee80211_is_mgmt(fc))
+		return QSLT_MGNT;
+	if (ieee80211_is_nullfunc(fc))
+		return QSLT_HIGH;
+
+	return skb->priority;
+}
+
+static int _rtl92se_rate_mapping(bool isht, u8 desc_rate, bool first_ampdu)
+{
+	int rate_idx = 0;
+
+	if (first_ampdu) {
+		if (false == isht) {
+			switch (desc_rate) {
+			case DESC92S_RATE1M:
+				rate_idx = 0;
+				break;
+			case DESC92S_RATE2M:
+				rate_idx = 1;
+				break;
+			case DESC92S_RATE5_5M:
+				rate_idx = 2;
+				break;
+			case DESC92S_RATE11M:
+				rate_idx = 3;
+				break;
+			case DESC92S_RATE6M:
+				rate_idx = 4;
+				break;
+			case DESC92S_RATE9M:
+				rate_idx = 5;
+				break;
+			case DESC92S_RATE12M:
+				rate_idx = 6;
+				break;
+			case DESC92S_RATE18M:
+				rate_idx = 7;
+				break;
+			case DESC92S_RATE24M:
+				rate_idx = 8;
+				break;
+			case DESC92S_RATE36M:
+				rate_idx = 9;
+				break;
+			case DESC92S_RATE48M:
+				rate_idx = 10;
+				break;
+			case DESC92S_RATE54M:
+				rate_idx = 11;
+				break;
+			default:
+				rate_idx = 0;
+				break;
+			}
+		} else {
+			rate_idx = 11;
+		}
+
+		return rate_idx;
+	}
+
+	switch (desc_rate) {
+	case DESC92S_RATE1M:
+		rate_idx = 0;
+		break;
+	case DESC92S_RATE2M:
+		rate_idx = 1;
+		break;
+	case DESC92S_RATE5_5M:
+		rate_idx = 2;
+		break;
+	case DESC92S_RATE11M:
+		rate_idx = 3;
+		break;
+	case DESC92S_RATE6M:
+		rate_idx = 4;
+		break;
+	case DESC92S_RATE9M:
+		rate_idx = 5;
+		break;
+	case DESC92S_RATE12M:
+		rate_idx = 6;
+		break;
+	case DESC92S_RATE18M:
+		rate_idx = 7;
+		break;
+	case DESC92S_RATE24M:
+		rate_idx = 8;
+		break;
+	case DESC92S_RATE36M:
+		rate_idx = 9;
+		break;
+	case DESC92S_RATE48M:
+		rate_idx = 10;
+		break;
+	case DESC92S_RATE54M:
+		rate_idx = 11;
+		break;
+	default:
+		rate_idx = 11;
+		break;
+	}
+	return rate_idx;
+}
+
+static u8 _rtl92s_query_rxpwrpercentage(char antpower)
+{
+	if ((antpower <= -100) || (antpower >= 20))
+		return 0;
+	else if (antpower >= 0)
+		return 100;
+	else
+		return 100 + antpower;
+}
+
+static u8 _rtl92s_evm_db_to_percentage(char value)
+{
+	char ret_val;
+	ret_val = value;
+
+	if (ret_val >= 0)
+		ret_val = 0;
+
+	if (ret_val <= -33)
+		ret_val = -33;
+
+	ret_val = 0 - ret_val;
+	ret_val *= 3;
+
+	if (ret_val == 99)
+		ret_val = 100;
+
+	return ret_val;
+}
+
+static long _rtl92se_translate_todbm(struct ieee80211_hw *hw,
+				     u8 signal_strength_index)
+{
+	long signal_power;
+
+	signal_power = (long)((signal_strength_index + 1) >> 1);
+	signal_power -= 95;
+	return signal_power;
+}
+
+static long _rtl92se_signal_scale_mapping(struct ieee80211_hw *hw,
+		long currsig)
+{
+	long retsig = 0;
+
+	/* Step 1. Scale mapping. */
+	if (currsig > 47)
+		retsig = 100;
+	else if (currsig > 14 && currsig <= 47)
+		retsig = 100 - ((47 - currsig) * 3) / 2;
+	else if (currsig > 2 && currsig <= 14)
+		retsig = 48 - ((14 - currsig) * 15) / 7;
+	else if (currsig >= 0)
+		retsig = currsig * 9 + 1;
+
+	return retsig;
+}
+
+
+static void _rtl92se_query_rxphystatus(struct ieee80211_hw *hw,
+				       struct rtl_stats *pstats, u8 *pdesc,
+				       struct rx_fwinfo *p_drvinfo,
+				       bool packet_match_bssid,
+				       bool packet_toself,
+				       bool packet_beacon)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct phy_sts_cck_8192s_t *cck_buf;
+	s8 rx_pwr_all = 0, rx_pwr[4];
+	u8 rf_rx_num = 0, evm, pwdb_all;
+	u8 i, max_spatial_stream;
+	u32 rssi, total_rssi = 0;
+	bool in_powersavemode = false;
+	bool is_cck_rate;
+
+	is_cck_rate = RX_HAL_IS_CCK_RATE(pdesc);
+	pstats->packet_matchbssid = packet_match_bssid;
+	pstats->packet_toself = packet_toself;
+	pstats->is_cck = is_cck_rate;
+	pstats->packet_beacon = packet_beacon;
+	pstats->is_cck = is_cck_rate;
+	pstats->rx_mimo_signalquality[0] = -1;
+	pstats->rx_mimo_signalquality[1] = -1;
+
+	if (is_cck_rate) {
+		u8 report, cck_highpwr;
+		cck_buf = (struct phy_sts_cck_8192s_t *)p_drvinfo;
+
+		if (!in_powersavemode)
+			cck_highpwr = (u8) rtl_get_bbreg(hw,
+						RFPGA0_XA_HSSIPARAMETER2,
+						0x200);
+		else
+			cck_highpwr = false;
+
+		if (!cck_highpwr) {
+			u8 cck_agc_rpt = cck_buf->cck_agc_rpt;
+			report = cck_buf->cck_agc_rpt & 0xc0;
+			report = report >> 6;
+			switch (report) {
+			case 0x3:
+				rx_pwr_all = -40 - (cck_agc_rpt & 0x3e);
+				break;
+			case 0x2:
+				rx_pwr_all = -20 - (cck_agc_rpt & 0x3e);
+				break;
+			case 0x1:
+				rx_pwr_all = -2 - (cck_agc_rpt & 0x3e);
+				break;
+			case 0x0:
+				rx_pwr_all = 14 - (cck_agc_rpt & 0x3e);
+				break;
+			}
+		} else {
+			u8 cck_agc_rpt = cck_buf->cck_agc_rpt;
+			report = p_drvinfo->cfosho[0] & 0x60;
+			report = report >> 5;
+			switch (report) {
+			case 0x3:
+				rx_pwr_all = -40 - ((cck_agc_rpt & 0x1f) << 1);
+				break;
+			case 0x2:
+				rx_pwr_all = -20 - ((cck_agc_rpt & 0x1f) << 1);
+				break;
+			case 0x1:
+				rx_pwr_all = -2 - ((cck_agc_rpt & 0x1f) << 1);
+				break;
+			case 0x0:
+				rx_pwr_all = 14 - ((cck_agc_rpt & 0x1f) << 1);
+				break;
+			}
+		}
+
+		pwdb_all = _rtl92s_query_rxpwrpercentage(rx_pwr_all);
+
+		/* CCK gain is smaller than OFDM/MCS gain,  */
+		/* so we add gain diff by experiences, the val is 6 */
+		pwdb_all += 6;
+		if (pwdb_all > 100)
+			pwdb_all = 100;
+		/* modify the offset to make the same gain index with OFDM. */
+		if (pwdb_all > 34 && pwdb_all <= 42)
+			pwdb_all -= 2;
+		else if (pwdb_all > 26 && pwdb_all <= 34)
+			pwdb_all -= 6;
+		else if (pwdb_all > 14 && pwdb_all <= 26)
+			pwdb_all -= 8;
+		else if (pwdb_all > 4 && pwdb_all <= 14)
+			pwdb_all -= 4;
+
+		pstats->rx_pwdb_all = pwdb_all;
+		pstats->recvsignalpower = rx_pwr_all;
+
+		if (packet_match_bssid) {
+			u8 sq;
+			if (pstats->rx_pwdb_all > 40) {
+				sq = 100;
+			} else {
+				sq = cck_buf->sq_rpt;
+				if (sq > 64)
+					sq = 0;
+				else if (sq < 20)
+					sq = 100;
+				else
+					sq = ((64 - sq) * 100) / 44;
+			}
+
+			pstats->signalquality = sq;
+			pstats->rx_mimo_signalquality[0] = sq;
+			pstats->rx_mimo_signalquality[1] = -1;
+		}
+	} else {
+		rtlpriv->dm.rfpath_rxenable[0] =
+		    rtlpriv->dm.rfpath_rxenable[1] = true;
+		for (i = RF90_PATH_A; i < RF90_PATH_MAX; i++) {
+			if (rtlpriv->dm.rfpath_rxenable[i])
+				rf_rx_num++;
+
+			rx_pwr[i] = ((p_drvinfo->gain_trsw[i] &
+				    0x3f) * 2) - 110;
+			rssi = _rtl92s_query_rxpwrpercentage(rx_pwr[i]);
+			total_rssi += rssi;
+			rtlpriv->stats.rx_snr_db[i] =
+					 (long)(p_drvinfo->rxsnr[i] / 2);
+
+			if (packet_match_bssid)
+				pstats->rx_mimo_signalstrength[i] = (u8) rssi;
+		}
+
+		rx_pwr_all = ((p_drvinfo->pwdb_all >> 1) & 0x7f) - 110;
+		pwdb_all = _rtl92s_query_rxpwrpercentage(rx_pwr_all);
+		pstats->rx_pwdb_all = pwdb_all;
+		pstats->rxpower = rx_pwr_all;
+		pstats->recvsignalpower = rx_pwr_all;
+
+		if (GET_RX_STATUS_DESC_RX_HT(pdesc) &&
+			GET_RX_STATUS_DESC_RX_MCS(pdesc) >= DESC92S_RATEMCS8 &&
+		    GET_RX_STATUS_DESC_RX_MCS(pdesc) <= DESC92S_RATEMCS15)
+			max_spatial_stream = 2;
+		else
+			max_spatial_stream = 1;
+
+		for (i = 0; i < max_spatial_stream; i++) {
+			evm = _rtl92s_evm_db_to_percentage(p_drvinfo->rxevm[i]);
+
+			if (packet_match_bssid) {
+				if (i == 0)
+					pstats->signalquality = (u8)(evm &
+								 0xff);
+				pstats->rx_mimo_signalquality[i] =
+							 (u8) (evm & 0xff);
+			}
+		}
+	}
+
+	if (is_cck_rate)
+		pstats->signalstrength = (u8)(_rtl92se_signal_scale_mapping(hw,
+					 pwdb_all));
+	else if (rf_rx_num != 0)
+		pstats->signalstrength = (u8) (_rtl92se_signal_scale_mapping(hw,
+				total_rssi /= rf_rx_num));
+}
+
+static void _rtl92se_process_ui_rssi(struct ieee80211_hw *hw,
+				     struct rtl_stats *pstats)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u8 rfpath;
+	u32 last_rssi, tmpval;
+
+	if (pstats->packet_toself || pstats->packet_beacon) {
+		rtlpriv->stats.rssi_calculate_cnt++;
+
+		if (rtlpriv->stats.ui_rssi.total_num++ >=
+		    PHY_RSSI_SLID_WIN_MAX) {
+			rtlpriv->stats.ui_rssi.total_num =
+					 PHY_RSSI_SLID_WIN_MAX;
+			last_rssi = rtlpriv->stats.ui_rssi.elements[
+				rtlpriv->stats.ui_rssi.index];
+			rtlpriv->stats.ui_rssi.total_val -= last_rssi;
+		}
+
+		rtlpriv->stats.ui_rssi.total_val += pstats->signalstrength;
+		rtlpriv->stats.ui_rssi.elements[rtlpriv->stats.ui_rssi.index++]
+			 = pstats->signalstrength;
+
+		if (rtlpriv->stats.ui_rssi.index >= PHY_RSSI_SLID_WIN_MAX)
+			rtlpriv->stats.ui_rssi.index = 0;
+
+		tmpval = rtlpriv->stats.ui_rssi.total_val /
+			rtlpriv->stats.ui_rssi.total_num;
+		rtlpriv->stats.signal_strength = _rtl92se_translate_todbm(hw,
+								(u8) tmpval);
+		pstats->rssi = rtlpriv->stats.signal_strength;
+	}
+
+	if (!pstats->is_cck && pstats->packet_toself) {
+		for (rfpath = RF90_PATH_A; rfpath < rtlphy->num_total_rfpath;
+		     rfpath++) {
+			if (rtlpriv->stats.rx_rssi_percentage[rfpath] == 0) {
+				rtlpriv->stats.rx_rssi_percentage[rfpath] =
+				    pstats->rx_mimo_signalstrength[rfpath];
+
+			}
+
+			if (pstats->rx_mimo_signalstrength[rfpath] >
+			    rtlpriv->stats.rx_rssi_percentage[rfpath]) {
+				rtlpriv->stats.rx_rssi_percentage[rfpath] =
+				    ((rtlpriv->stats.rx_rssi_percentage[rfpath]
+				    * (RX_SMOOTH_FACTOR - 1)) +
+				    (pstats->rx_mimo_signalstrength[rfpath])) /
+				    (RX_SMOOTH_FACTOR);
+
+				rtlpriv->stats.rx_rssi_percentage[rfpath] =
+				    rtlpriv->stats.rx_rssi_percentage[rfpath]
+				    + 1;
+			} else {
+				rtlpriv->stats.rx_rssi_percentage[rfpath] =
+				    ((rtlpriv->stats.rx_rssi_percentage[rfpath]
+				    * (RX_SMOOTH_FACTOR - 1)) +
+				    (pstats->rx_mimo_signalstrength[rfpath])) /
+				    (RX_SMOOTH_FACTOR);
+			}
+
+		}
+	}
+}
+
+static void _rtl92se_update_rxsignalstatistics(struct ieee80211_hw *hw,
+					       struct rtl_stats *pstats)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	int weighting = 0;
+
+	if (rtlpriv->stats.recv_signal_power == 0)
+		rtlpriv->stats.recv_signal_power = pstats->recvsignalpower;
+
+	if (pstats->recvsignalpower > rtlpriv->stats.recv_signal_power)
+		weighting = 5;
+	else if (pstats->recvsignalpower < rtlpriv->stats.recv_signal_power)
+		weighting = (-5);
+
+	rtlpriv->stats.recv_signal_power = (rtlpriv->stats.recv_signal_power * 5
+					   + pstats->recvsignalpower +
+					   weighting) / 6;
+}
+
+static void _rtl92se_process_pwdb(struct ieee80211_hw *hw,
+				  struct rtl_stats *pstats)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	long undec_sm_pwdb = 0;
+
+	if (mac->opmode == NL80211_IFTYPE_ADHOC) {
+		return;
+	} else {
+		undec_sm_pwdb =
+		    rtlpriv->dm.undecorated_smoothed_pwdb;
+	}
+
+	if (pstats->packet_toself || pstats->packet_beacon) {
+		if (undec_sm_pwdb < 0)
+			undec_sm_pwdb = pstats->rx_pwdb_all;
+
+		if (pstats->rx_pwdb_all > (u32) undec_sm_pwdb) {
+			undec_sm_pwdb =
+			    (((undec_sm_pwdb) *
+			    (RX_SMOOTH_FACTOR - 1)) +
+			    (pstats->rx_pwdb_all)) / (RX_SMOOTH_FACTOR);
+
+			undec_sm_pwdb = undec_sm_pwdb + 1;
+		} else {
+			undec_sm_pwdb = (((undec_sm_pwdb) *
+			      (RX_SMOOTH_FACTOR - 1)) + (pstats->rx_pwdb_all)) /
+			      (RX_SMOOTH_FACTOR);
+		}
+
+		rtlpriv->dm.undecorated_smoothed_pwdb = undec_sm_pwdb;
+		_rtl92se_update_rxsignalstatistics(hw, pstats);
+	}
+}
+
+static void rtl_92s_process_streams(struct ieee80211_hw *hw,
+				    struct rtl_stats *pstats)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 stream;
+
+	for (stream = 0; stream < 2; stream++) {
+		if (pstats->rx_mimo_signalquality[stream] != -1) {
+			if (rtlpriv->stats.rx_evm_percentage[stream] == 0) {
+				rtlpriv->stats.rx_evm_percentage[stream] =
+				    pstats->rx_mimo_signalquality[stream];
+			}
+
+			rtlpriv->stats.rx_evm_percentage[stream] =
+			    ((rtlpriv->stats.rx_evm_percentage[stream] *
+					(RX_SMOOTH_FACTOR - 1)) +
+			     (pstats->rx_mimo_signalquality[stream] *
+					1)) / (RX_SMOOTH_FACTOR);
+		}
+	}
+}
+
+static void _rtl92se_process_ui_link_quality(struct ieee80211_hw *hw,
+					     struct rtl_stats *pstats)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 last_evm = 0, tmpval;
+
+	if (pstats->signalquality != 0) {
+		if (pstats->packet_toself || pstats->packet_beacon) {
+
+			if (rtlpriv->stats.ui_link_quality.total_num++ >=
+			    PHY_LINKQUALITY_SLID_WIN_MAX) {
+				rtlpriv->stats.ui_link_quality.total_num =
+				    PHY_LINKQUALITY_SLID_WIN_MAX;
+				last_evm =
+				    rtlpriv->stats.ui_link_quality.elements[
+				    rtlpriv->stats.ui_link_quality.index];
+				rtlpriv->stats.ui_link_quality.total_val -=
+				    last_evm;
+			}
+
+			rtlpriv->stats.ui_link_quality.total_val +=
+			    pstats->signalquality;
+			rtlpriv->stats.ui_link_quality.elements[
+				rtlpriv->stats.ui_link_quality.index++] =
+			    pstats->signalquality;
+
+			if (rtlpriv->stats.ui_link_quality.index >=
+			    PHY_LINKQUALITY_SLID_WIN_MAX)
+				rtlpriv->stats.ui_link_quality.index = 0;
+
+			tmpval = rtlpriv->stats.ui_link_quality.total_val /
+			    rtlpriv->stats.ui_link_quality.total_num;
+			rtlpriv->stats.signal_quality = tmpval;
+
+			rtlpriv->stats.last_sigstrength_inpercent = tmpval;
+
+			rtl_92s_process_streams(hw, pstats);
+
+		}
+	}
+}
+
+static void _rtl92se_process_phyinfo(struct ieee80211_hw *hw,
+				     u8 *buffer,
+				     struct rtl_stats *pcurrent_stats)
+{
+
+	if (!pcurrent_stats->packet_matchbssid &&
+	    !pcurrent_stats->packet_beacon)
+		return;
+
+	_rtl92se_process_ui_rssi(hw, pcurrent_stats);
+	_rtl92se_process_pwdb(hw, pcurrent_stats);
+	_rtl92se_process_ui_link_quality(hw, pcurrent_stats);
+}
+
+static void _rtl92se_translate_rx_signal_stuff(struct ieee80211_hw *hw,
+		struct sk_buff *skb, struct rtl_stats *pstats,
+		u8 *pdesc, struct rx_fwinfo *p_drvinfo)
+{
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+
+	struct ieee80211_hdr *hdr;
+	u8 *tmp_buf;
+	u8 *praddr;
+	u8 *psaddr;
+	__le16 fc;
+	u16 type, cfc;
+	bool packet_matchbssid, packet_toself, packet_beacon;
+
+	tmp_buf = skb->data + pstats->rx_drvinfo_size + pstats->rx_bufshift;
+
+	hdr = (struct ieee80211_hdr *)tmp_buf;
+	fc = hdr->frame_control;
+	cfc = le16_to_cpu(fc);
+	type = WLAN_FC_GET_TYPE(fc);
+	praddr = hdr->addr1;
+	psaddr = hdr->addr2;
+
+	packet_matchbssid = ((IEEE80211_FTYPE_CTL != type) &&
+	     (!compare_ether_addr(mac->bssid, (cfc & IEEE80211_FCTL_TODS) ?
+			hdr->addr1 : (cfc & IEEE80211_FCTL_FROMDS) ?
+			hdr->addr2 : hdr->addr3)) && (!pstats->hwerror) &&
+			(!pstats->crc) && (!pstats->icv));
+
+	packet_toself = packet_matchbssid &&
+	    (!compare_ether_addr(praddr, rtlefuse->dev_addr));
+
+	if (ieee80211_is_beacon(fc))
+		packet_beacon = true;
+
+	_rtl92se_query_rxphystatus(hw, pstats, pdesc, p_drvinfo,
+			packet_matchbssid, packet_toself, packet_beacon);
+	_rtl92se_process_phyinfo(hw, tmp_buf, pstats);
+}
+
+bool rtl92se_rx_query_desc(struct ieee80211_hw *hw, struct rtl_stats *stats,
+			   struct ieee80211_rx_status *rx_status, u8 *pdesc,
+			   struct sk_buff *skb)
+{
+	struct rx_fwinfo *p_drvinfo;
+	u32 phystatus = (u32)GET_RX_STATUS_DESC_PHY_STATUS(pdesc);
+
+	stats->length = (u16)GET_RX_STATUS_DESC_PKT_LEN(pdesc);
+	stats->rx_drvinfo_size = (u8)GET_RX_STATUS_DESC_DRVINFO_SIZE(pdesc) * 8;
+	stats->rx_bufshift = (u8)(GET_RX_STATUS_DESC_SHIFT(pdesc) & 0x03);
+	stats->icv = (u16)GET_RX_STATUS_DESC_ICV(pdesc);
+	stats->crc = (u16)GET_RX_STATUS_DESC_CRC32(pdesc);
+	stats->hwerror = (u16)(stats->crc | stats->icv);
+	stats->decrypted = !GET_RX_STATUS_DESC_SWDEC(pdesc);
+
+	stats->rate = (u8)GET_RX_STATUS_DESC_RX_MCS(pdesc);
+	stats->shortpreamble = (u16)GET_RX_STATUS_DESC_SPLCP(pdesc);
+	stats->isampdu = (bool)(GET_RX_STATUS_DESC_PAGGR(pdesc) == 1);
+	stats->timestamp_low = GET_RX_STATUS_DESC_TSFL(pdesc);
+	stats->rx_is40Mhzpacket = (bool)GET_RX_STATUS_DESC_BW(pdesc);
+
+	if (stats->hwerror)
+		return false;
+
+	rx_status->freq = hw->conf.channel->center_freq;
+	rx_status->band = hw->conf.channel->band;
+
+	if (GET_RX_STATUS_DESC_CRC32(pdesc))
+		rx_status->flag |= RX_FLAG_FAILED_FCS_CRC;
+
+	if (!GET_RX_STATUS_DESC_SWDEC(pdesc))
+		rx_status->flag |= RX_FLAG_DECRYPTED;
+
+	if (GET_RX_STATUS_DESC_BW(pdesc))
+		rx_status->flag |= RX_FLAG_40MHZ;
+
+	if (GET_RX_STATUS_DESC_RX_HT(pdesc))
+		rx_status->flag |= RX_FLAG_HT;
+
+	rx_status->flag |= RX_FLAG_MACTIME_MPDU;
+
+	if (stats->decrypted)
+		rx_status->flag |= RX_FLAG_DECRYPTED;
+
+	rx_status->rate_idx = _rtl92se_rate_mapping((bool)
+			GET_RX_STATUS_DESC_RX_HT(pdesc),
+			(u8)GET_RX_STATUS_DESC_RX_MCS(pdesc),
+			(bool)GET_RX_STATUS_DESC_PAGGR(pdesc));
+
+
+	rx_status->mactime = GET_RX_STATUS_DESC_TSFL(pdesc);
+	if (phystatus == true) {
+		p_drvinfo = (struct rx_fwinfo *)(skb->data +
+						 stats->rx_bufshift);
+		_rtl92se_translate_rx_signal_stuff(hw, skb, stats, pdesc,
+						   p_drvinfo);
+	}
+
+	/*rx_status->qual = stats->signal; */
+	rx_status->signal = stats->rssi + 10;
+	/*rx_status->noise = -stats->noise; */
+
+	return true;
+}
+
+void rtl92se_tx_fill_desc(struct ieee80211_hw *hw,
+		struct ieee80211_hdr *hdr, u8 *pdesc_tx,
+		struct ieee80211_tx_info *info, struct sk_buff *skb,
+		u8 hw_queue, struct rtl_tcb_desc *ptcb_desc)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct ieee80211_sta *sta = info->control.sta;
+	u8 *pdesc = (u8 *) pdesc_tx;
+	u16 seq_number;
+	__le16 fc = hdr->frame_control;
+	u8 reserved_macid = 0;
+	u8 fw_qsel = _rtl92se_map_hwqueue_to_fwqueue(skb, hw_queue);
+	bool firstseg = (!(hdr->seq_ctrl & cpu_to_le16(IEEE80211_SCTL_FRAG)));
+	bool lastseg = (!(hdr->frame_control &
+			cpu_to_le16(IEEE80211_FCTL_MOREFRAGS)));
+	dma_addr_t mapping = pci_map_single(rtlpci->pdev, skb->data, skb->len,
+		    PCI_DMA_TODEVICE);
+	u8 bw_40 = 0;
+
+	if (mac->opmode == NL80211_IFTYPE_STATION) {
+		bw_40 = mac->bw_40;
+	} else if (mac->opmode == NL80211_IFTYPE_AP ||
+		mac->opmode == NL80211_IFTYPE_ADHOC) {
+		if (sta)
+			bw_40 = sta->ht_cap.cap &
+				    IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+	}
+
+	seq_number = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4;
+
+	rtl_get_tcb_desc(hw, info, sta, skb, ptcb_desc);
+
+	CLEAR_PCI_TX_DESC_CONTENT(pdesc, TX_DESC_SIZE_RTL8192S);
+
+	if (firstseg) {
+		if (rtlpriv->dm.useramask) {
+			/* set txdesc macId */
+			if (ptcb_desc->mac_id < 32) {
+				SET_TX_DESC_MACID(pdesc, ptcb_desc->mac_id);
+				reserved_macid |= ptcb_desc->mac_id;
+			}
+		}
+		SET_TX_DESC_RSVD_MACID(pdesc, reserved_macid);
+
+		SET_TX_DESC_TXHT(pdesc, ((ptcb_desc->hw_rate >=
+				 DESC92S_RATEMCS0) ? 1 : 0));
+
+		if (rtlhal->version == VERSION_8192S_ACUT) {
+			if (ptcb_desc->hw_rate == DESC92S_RATE1M ||
+				ptcb_desc->hw_rate  == DESC92S_RATE2M ||
+				ptcb_desc->hw_rate == DESC92S_RATE5_5M ||
+				ptcb_desc->hw_rate == DESC92S_RATE11M) {
+				ptcb_desc->hw_rate = DESC92S_RATE12M;
+			}
+		}
+
+		SET_TX_DESC_TX_RATE(pdesc, ptcb_desc->hw_rate);
+
+		if (ptcb_desc->use_shortgi || ptcb_desc->use_shortpreamble)
+			SET_TX_DESC_TX_SHORT(pdesc, 0);
+
+		/* Aggregation related */
+		if (info->flags & IEEE80211_TX_CTL_AMPDU)
+			SET_TX_DESC_AGG_ENABLE(pdesc, 1);
+
+		/* For AMPDU, we must insert SSN into TX_DESC */
+		SET_TX_DESC_SEQ(pdesc, seq_number);
+
+		/* Protection mode related */
+		/* For 92S, if RTS/CTS are set, HW will execute RTS. */
+		/* We choose only one protection mode to execute */
+		SET_TX_DESC_RTS_ENABLE(pdesc, ((ptcb_desc->rts_enable &&
+				!ptcb_desc->cts_enable) ? 1 : 0));
+		SET_TX_DESC_CTS_ENABLE(pdesc, ((ptcb_desc->cts_enable) ?
+				       1 : 0));
+		SET_TX_DESC_RTS_STBC(pdesc, ((ptcb_desc->rts_stbc) ? 1 : 0));
+
+		SET_TX_DESC_RTS_RATE(pdesc, ptcb_desc->rts_rate);
+		SET_TX_DESC_RTS_BANDWIDTH(pdesc, 0);
+		SET_TX_DESC_RTS_SUB_CARRIER(pdesc, ptcb_desc->rts_sc);
+		SET_TX_DESC_RTS_SHORT(pdesc, ((ptcb_desc->rts_rate <=
+		       DESC92S_RATE54M) ?
+		       (ptcb_desc->rts_use_shortpreamble ? 1 : 0)
+		       : (ptcb_desc->rts_use_shortgi ? 1 : 0)));
+
+
+		/* Set Bandwidth and sub-channel settings. */
+		if (bw_40) {
+			if (ptcb_desc->packet_bw) {
+				SET_TX_DESC_TX_BANDWIDTH(pdesc, 1);
+				/* use duplicated mode */
+				SET_TX_DESC_TX_SUB_CARRIER(pdesc, 0);
+			} else {
+				SET_TX_DESC_TX_BANDWIDTH(pdesc, 0);
+				SET_TX_DESC_TX_SUB_CARRIER(pdesc,
+						   mac->cur_40_prime_sc);
+			}
+		} else {
+			SET_TX_DESC_TX_BANDWIDTH(pdesc, 0);
+			SET_TX_DESC_TX_SUB_CARRIER(pdesc, 0);
+		}
+
+		/* 3 Fill necessary field in First Descriptor */
+		/*DWORD 0*/
+		SET_TX_DESC_LINIP(pdesc, 0);
+		SET_TX_DESC_OFFSET(pdesc, 32);
+		SET_TX_DESC_PKT_SIZE(pdesc, (u16) skb->len);
+
+		/*DWORD 1*/
+		SET_TX_DESC_RA_BRSR_ID(pdesc, ptcb_desc->ratr_index);
+
+		/* Fill security related */
+		if (info->control.hw_key) {
+			struct ieee80211_key_conf *keyconf;
+
+			keyconf = info->control.hw_key;
+			switch (keyconf->cipher) {
+			case WLAN_CIPHER_SUITE_WEP40:
+			case WLAN_CIPHER_SUITE_WEP104:
+				SET_TX_DESC_SEC_TYPE(pdesc, 0x1);
+				break;
+			case WLAN_CIPHER_SUITE_TKIP:
+				SET_TX_DESC_SEC_TYPE(pdesc, 0x2);
+				break;
+			case WLAN_CIPHER_SUITE_CCMP:
+				SET_TX_DESC_SEC_TYPE(pdesc, 0x3);
+				break;
+			default:
+				SET_TX_DESC_SEC_TYPE(pdesc, 0x0);
+				break;
+
+			}
+		}
+
+		/* Set Packet ID */
+		SET_TX_DESC_PACKET_ID(pdesc, 0);
+
+		/* We will assign magement queue to BK. */
+		SET_TX_DESC_QUEUE_SEL(pdesc, fw_qsel);
+
+		/* Alwasy enable all rate fallback range */
+		SET_TX_DESC_DATA_RATE_FB_LIMIT(pdesc, 0x1F);
+
+		/* Fix: I don't kown why hw use 6.5M to tx when set it */
+		SET_TX_DESC_USER_RATE(pdesc,
+				      ptcb_desc->use_driver_rate ? 1 : 0);
+
+		/* Set NON_QOS bit. */
+		if (!ieee80211_is_data_qos(fc))
+			SET_TX_DESC_NON_QOS(pdesc, 1);
+
+	}
+
+	/* Fill fields that are required to be initialized
+	 * in all of the descriptors */
+	/*DWORD 0 */
+	SET_TX_DESC_FIRST_SEG(pdesc, (firstseg ? 1 : 0));
+	SET_TX_DESC_LAST_SEG(pdesc, (lastseg ? 1 : 0));
+
+	/* DWORD 7 */
+	SET_TX_DESC_TX_BUFFER_SIZE(pdesc, (u16) skb->len);
+
+	/* DOWRD 8 */
+	SET_TX_DESC_TX_BUFFER_ADDRESS(pdesc, cpu_to_le32(mapping));
+
+	RT_TRACE(rtlpriv, COMP_SEND, DBG_TRACE, ("\n"));
+}
+
+void rtl92se_tx_fill_cmddesc(struct ieee80211_hw *hw, u8 *pdesc,
+	bool firstseg, bool lastseg, struct sk_buff *skb)
+{
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_tcb_desc *tcb_desc = (struct rtl_tcb_desc *)(skb->cb);
+
+	dma_addr_t mapping = pci_map_single(rtlpci->pdev, skb->data, skb->len,
+			PCI_DMA_TODEVICE);
+
+    /* Clear all status	*/
+	CLEAR_PCI_TX_DESC_CONTENT(pdesc, TX_CMDDESC_SIZE_RTL8192S);
+
+	/* This bit indicate this packet is used for FW download. */
+	if (tcb_desc->cmd_or_init == DESC_PACKET_TYPE_INIT) {
+		/* For firmware downlaod we only need to set LINIP */
+		SET_TX_DESC_LINIP(pdesc, tcb_desc->last_inipkt);
+
+		/* 92SE must set as 1 for firmware download HW DMA error */
+		SET_TX_DESC_FIRST_SEG(pdesc, 1);
+		SET_TX_DESC_LAST_SEG(pdesc, 1);
+
+		/* 92SE need not to set TX packet size when firmware download */
+		SET_TX_DESC_PKT_SIZE(pdesc, (u16)(skb->len));
+		SET_TX_DESC_TX_BUFFER_SIZE(pdesc, (u16)(skb->len));
+		SET_TX_DESC_TX_BUFFER_ADDRESS(pdesc, cpu_to_le32(mapping));
+
+		SET_TX_DESC_OWN(pdesc, 1);
+	} else { /* H2C Command Desc format (Host TXCMD) */
+		/* 92SE must set as 1 for firmware download HW DMA error */
+		SET_TX_DESC_FIRST_SEG(pdesc, 1);
+		SET_TX_DESC_LAST_SEG(pdesc, 1);
+
+		SET_TX_DESC_OFFSET(pdesc, 0x20);
+
+		/* Buffer size + command header */
+		SET_TX_DESC_PKT_SIZE(pdesc, (u16)(skb->len));
+		/* Fixed queue of H2C command */
+		SET_TX_DESC_QUEUE_SEL(pdesc, 0x13);
+
+		SET_BITS_TO_LE_4BYTE(skb->data, 24, 7, rtlhal->h2c_txcmd_seq);
+
+		SET_TX_DESC_TX_BUFFER_SIZE(pdesc, (u16)(skb->len));
+		SET_TX_DESC_TX_BUFFER_ADDRESS(pdesc, cpu_to_le32(mapping));
+
+		SET_TX_DESC_OWN(pdesc, 1);
+
+	}
+}
+
+void rtl92se_set_desc(u8 *pdesc, bool istx, u8 desc_name, u8 *val)
+{
+	if (istx == true) {
+		switch (desc_name) {
+		case HW_DESC_OWN:
+			SET_TX_DESC_OWN(pdesc, 1);
+			break;
+		case HW_DESC_TX_NEXTDESC_ADDR:
+			SET_TX_DESC_NEXT_DESC_ADDRESS(pdesc, *(u32 *) val);
+			break;
+		default:
+			RT_ASSERT(false, ("ERR txdesc :%d not process\n",
+				  desc_name));
+			break;
+		}
+	} else {
+		switch (desc_name) {
+		case HW_DESC_RXOWN:
+			SET_RX_STATUS_DESC_OWN(pdesc, 1);
+			break;
+		case HW_DESC_RXBUFF_ADDR:
+			SET_RX_STATUS__DESC_BUFF_ADDR(pdesc, *(u32 *) val);
+			break;
+		case HW_DESC_RXPKT_LEN:
+			SET_RX_STATUS_DESC_PKT_LEN(pdesc, *(u32 *) val);
+			break;
+		case HW_DESC_RXERO:
+			SET_RX_STATUS_DESC_EOR(pdesc, 1);
+			break;
+		default:
+			RT_ASSERT(false, ("ERR rxdesc :%d not process\n",
+				  desc_name));
+			break;
+		}
+	}
+}
+
+u32 rtl92se_get_desc(u8 *desc, bool istx, u8 desc_name)
+{
+	u32 ret = 0;
+
+	if (istx == true) {
+		switch (desc_name) {
+		case HW_DESC_OWN:
+			ret = GET_TX_DESC_OWN(desc);
+			break;
+		case HW_DESC_TXBUFF_ADDR:
+			ret = GET_TX_DESC_TX_BUFFER_ADDRESS(desc);
+			break;
+		default:
+			RT_ASSERT(false, ("ERR txdesc :%d not process\n",
+				  desc_name));
+			break;
+		}
+	} else {
+		switch (desc_name) {
+		case HW_DESC_OWN:
+			ret = GET_RX_STATUS_DESC_OWN(desc);
+			break;
+		case HW_DESC_RXPKT_LEN:
+			ret = GET_RX_STATUS_DESC_PKT_LEN(desc);
+			break;
+		default:
+			RT_ASSERT(false, ("ERR rxdesc :%d not process\n",
+				  desc_name));
+			break;
+		}
+	}
+	return ret;
+}
+
+void rtl92se_tx_polling(struct ieee80211_hw *hw, u8 hw_queue)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	rtl_write_word(rtlpriv, TP_POLL, BIT(0) << (hw_queue));
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/trx.h b/drivers/net/wireless/rtlwifi/rtl8192se/trx.h
new file mode 100644
index 00000000000..05862c51b86
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/trx.h
@@ -0,0 +1,45 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+#ifndef __REALTEK_PCI92SE_TRX_H__
+#define __REALTEK_PCI92SE_TRX_H__
+
+void rtl92se_tx_fill_desc(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
+			  u8 *pdesc, struct ieee80211_tx_info *info,
+			  struct sk_buff *skb, u8 hw_queue,
+			  struct rtl_tcb_desc *ptcb_desc);
+void rtl92se_tx_fill_cmddesc(struct ieee80211_hw *hw, u8 *pdesc, bool firstseg,
+			     bool lastseg, struct sk_buff *skb);
+bool rtl92se_rx_query_desc(struct ieee80211_hw *hw, struct rtl_stats *stats,
+			   struct ieee80211_rx_status *rx_status, u8 *pdesc,
+			   struct sk_buff *skb);
+void rtl92se_set_desc(u8 *pdesc, bool istx, u8 desc_name, u8 *val);
+u32 rtl92se_get_desc(u8 *pdesc, bool istx, u8 desc_name);
+void rtl92se_tx_polling(struct ieee80211_hw *hw, u8 hw_queue);
+
+#endif
-- 
cgit v1.2.3


From 85e09b40405b44b049500702beb6856646b4be46 Mon Sep 17 00:00:00 2001
From: Chaoming Li <chaoming_li@realsil.com.cn>
Date: Tue, 3 May 2011 09:49:36 -0500
Subject: rtlwifi: rtl8192se: Modify Kconfig and Makefile routines for new
 driver

Modify rtlwifi routines for rtl8192se and set up Kconfig
and Makefile for new driver.

This patch also disables ASPM for the RTL8192SE to prevent some strange
crashes on LF's system.

Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/Kconfig            | 15 +++++++++++++--
 drivers/net/wireless/rtlwifi/Makefile           |  1 +
 drivers/net/wireless/rtlwifi/rtl8192se/Makefile | 15 +++++++++++++++
 drivers/net/wireless/rtlwifi/rtl8192se/sw.c     |  2 +-
 4 files changed, 30 insertions(+), 3 deletions(-)
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8192se/Makefile

diff --git a/drivers/net/wireless/rtlwifi/Kconfig b/drivers/net/wireless/rtlwifi/Kconfig
index ce49e0ce7ca..5aee8b22d74 100644
--- a/drivers/net/wireless/rtlwifi/Kconfig
+++ b/drivers/net/wireless/rtlwifi/Kconfig
@@ -10,6 +10,17 @@ config RTL8192CE
 
 	If you choose to build it as a module, it will be called rtl8192ce
 
+config RTL8192SE
+	tristate "Realtek RTL8192SE/RTL8191SE PCIe Wireless Network Adapter"
+	depends on MAC80211 && EXPERIMENTAL
+	select FW_LOADER
+	select RTLWIFI
+	---help---
+	This is the driver for Realtek RTL8192SE/RTL8191SE 802.11n PCIe
+	wireless network adapters.
+
+	If you choose to build it as a module, it will be called rtl8192se
+
 config RTL8192CU
 	tristate "Realtek RTL8192CU/RTL8188CU USB Wireless Network Adapter"
 	depends on MAC80211 && USB && EXPERIMENTAL
@@ -24,10 +35,10 @@ config RTL8192CU
 
 config RTLWIFI
 	tristate
-	depends on RTL8192CE || RTL8192CU
+	depends on RTL8192CE || RTL8192CU || RTL8192SE
 	default m
 
 config RTL8192C_COMMON
 	tristate
-	depends on RTL8192CE || RTL8192CU
+	depends on RTL8192CE || RTL8192CU || RTL8192SE
 	default m
diff --git a/drivers/net/wireless/rtlwifi/Makefile b/drivers/net/wireless/rtlwifi/Makefile
index ec9393f2479..7acce83c378 100644
--- a/drivers/net/wireless/rtlwifi/Makefile
+++ b/drivers/net/wireless/rtlwifi/Makefile
@@ -22,5 +22,6 @@ endif
 obj-$(CONFIG_RTL8192C_COMMON)	+= rtl8192c/
 obj-$(CONFIG_RTL8192CE)		+= rtl8192ce/
 obj-$(CONFIG_RTL8192CU)		+= rtl8192cu/
+obj-$(CONFIG_RTL8192SE)		+= rtl8192se/
 
 ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/Makefile b/drivers/net/wireless/rtlwifi/rtl8192se/Makefile
new file mode 100644
index 00000000000..b7eb13819cb
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/Makefile
@@ -0,0 +1,15 @@
+rtl8192se-objs :=		\
+		dm.o		\
+		fw.o		\
+		hw.o		\
+		led.o		\
+		phy.o		\
+		rf.o		\
+		sw.o		\
+		table.o		\
+		trx.o
+
+obj-$(CONFIG_RTL8192SE) += rtl8192se.o
+
+ccflags-y += -D__CHECK_ENDIAN__
+
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
index c5351b65b33..7cfd6a2cb14 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
@@ -58,7 +58,7 @@ static void rtl92s_init_aspm_vars(struct ieee80211_hw *hw)
 	 * 4 - Always Enable ASPM without Clock Req.
 	 * set defult to RTL8192CE:3 RTL8192E:2
 	 * */
-	rtlpci->const_pci_aspm = 2;
+	rtlpci->const_pci_aspm = 0; /* changed from 2 due to crashes */
 
 	/*Setting for PCI-E device */
 	rtlpci->const_devicepci_aspm_setting = 0x03;
-- 
cgit v1.2.3


From 57f16b5da03784d1660133fbec7281ea5735da69 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Tue, 3 May 2011 20:11:45 -0700
Subject: mwifiex: fix simultaneous assoc and scan issue

When scan and assoc (infra/ibss) commands are simultaneously
given in two terminals, association response is erroneously
served while serving the scan response.

mwifiex_cfg80211_results() is the common routine for sending
ioctl (scan, assoc etc.) results to cfg80211 stack. In above
scenario even if the common routine is called for scan ioctl
context, it also tries to send information about assoc ioctl to
cfg80211 because "priv->assoc_request/priv->ibss_join_request"
flag is on at that time.

Fix the issue by updating request variable after assoc handling
and modifying the variable check in mwifiex_cfg80211_results.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cfg80211.c | 11 +++++++----
 drivers/net/wireless/mwifiex/main.h     |  4 ++--
 2 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 98009e2194c..77a80296b6c 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1044,7 +1044,7 @@ mwifiex_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev,
 		goto done;
 	}
 
-	priv->assoc_request = 1;
+	priv->assoc_request = -EINPROGRESS;
 
 	wiphy_dbg(wiphy, "info: Trying to associate to %s and bssid %pM\n",
 	       (char *) sme->ssid, sme->bssid);
@@ -1052,6 +1052,7 @@ mwifiex_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev,
 	ret = mwifiex_cfg80211_assoc(priv, sme->ssid_len, sme->ssid, sme->bssid,
 				     priv->bss_mode, sme->channel, sme, 0);
 
+	priv->assoc_request = 1;
 done:
 	priv->assoc_result = ret;
 	queue_work(priv->workqueue, &priv->cfg_workqueue);
@@ -1080,7 +1081,7 @@ mwifiex_cfg80211_join_ibss(struct wiphy *wiphy, struct net_device *dev,
 		goto done;
 	}
 
-	priv->ibss_join_request = 1;
+	priv->ibss_join_request = -EINPROGRESS;
 
 	wiphy_dbg(wiphy, "info: trying to join to %s and bssid %pM\n",
 	       (char *) params->ssid, params->bssid);
@@ -1088,6 +1089,8 @@ mwifiex_cfg80211_join_ibss(struct wiphy *wiphy, struct net_device *dev,
 	ret = mwifiex_cfg80211_assoc(priv, params->ssid_len, params->ssid,
 				params->bssid, priv->bss_mode,
 				params->channel, NULL, params->privacy);
+
+	priv->ibss_join_request = 1;
 done:
 	priv->ibss_join_result = ret;
 	queue_work(priv->workqueue, &priv->cfg_workqueue);
@@ -1380,7 +1383,7 @@ done:
 		kfree(scan_req);
 	}
 
-	if (priv->assoc_request) {
+	if (priv->assoc_request == 1) {
 		if (!priv->assoc_result) {
 			cfg80211_connect_result(priv->netdev, priv->cfg_bssid,
 						NULL, 0, NULL, 0,
@@ -1399,7 +1402,7 @@ done:
 		priv->assoc_result = 0;
 	}
 
-	if (priv->ibss_join_request) {
+	if (priv->ibss_join_request == 1) {
 		if (!priv->ibss_join_result) {
 			cfg80211_ibss_joined(priv->netdev, priv->cfg_bssid,
 					     GFP_KERNEL);
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 5043fcd2256..b4bb5ec4723 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -479,9 +479,9 @@ struct mwifiex_private {
 	u8 report_scan_result;
 	struct cfg80211_scan_request *scan_request;
 	int scan_result_status;
-	bool assoc_request;
+	int assoc_request;
 	u16 assoc_result;
-	bool ibss_join_request;
+	int ibss_join_request;
 	u16 ibss_join_result;
 	bool disconnect;
 	u8 cfg_bssid[6];
-- 
cgit v1.2.3


From 270e58e8898c8be40451ebee45b6c9b5bd5db04b Mon Sep 17 00:00:00 2001
From: Yogesh Ashok Powar <yogeshp@marvell.com>
Date: Tue, 3 May 2011 20:11:46 -0700
Subject: mwifiex: remove unnecessary variable initialization

Skip initialization of local variables with some default values
if the values are not going to be used further down the code path.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/11n.c           |  7 ++--
 drivers/net/wireless/mwifiex/11n_aggr.c      |  7 ++--
 drivers/net/wireless/mwifiex/11n_rxreorder.c | 15 ++++-----
 drivers/net/wireless/mwifiex/cfg80211.c      | 23 +++++--------
 drivers/net/wireless/mwifiex/cmdevt.c        | 28 ++++++++--------
 drivers/net/wireless/mwifiex/debugfs.c       | 10 +++---
 drivers/net/wireless/mwifiex/init.c          | 29 +++++++---------
 drivers/net/wireless/mwifiex/join.c          |  9 +++--
 drivers/net/wireless/mwifiex/main.c          | 19 +++++------
 drivers/net/wireless/mwifiex/scan.c          | 22 ++++++------
 drivers/net/wireless/mwifiex/sdio.c          | 30 ++++++++---------
 drivers/net/wireless/mwifiex/sta_cmd.c       |  8 ++---
 drivers/net/wireless/mwifiex/sta_cmdresp.c   | 28 ++++++++--------
 drivers/net/wireless/mwifiex/sta_ioctl.c     | 50 +++++++++++++---------------
 drivers/net/wireless/mwifiex/sta_rx.c        |  4 +--
 drivers/net/wireless/mwifiex/sta_tx.c        |  4 +--
 drivers/net/wireless/mwifiex/txrx.c          | 10 +++---
 drivers/net/wireless/mwifiex/util.c          |  8 ++---
 drivers/net/wireless/mwifiex/wmm.c           |  2 +-
 19 files changed, 148 insertions(+), 165 deletions(-)

diff --git a/drivers/net/wireless/mwifiex/11n.c b/drivers/net/wireless/mwifiex/11n.c
index 1d294cfa6c9..916183d3900 100644
--- a/drivers/net/wireless/mwifiex/11n.c
+++ b/drivers/net/wireless/mwifiex/11n.c
@@ -187,7 +187,7 @@ int mwifiex_ret_11n_addba_req(struct mwifiex_private *priv,
  */
 int mwifiex_ret_11n_cfg(struct host_cmd_ds_command *resp, void *data_buf)
 {
-	struct mwifiex_ds_11n_tx_cfg *tx_cfg = NULL;
+	struct mwifiex_ds_11n_tx_cfg *tx_cfg;
 	struct host_cmd_ds_11n_cfg *htcfg = &resp->params.htcfg;
 
 	if (data_buf) {
@@ -274,7 +274,7 @@ int mwifiex_cmd_amsdu_aggr_ctrl(struct host_cmd_ds_command *cmd,
 int mwifiex_ret_amsdu_aggr_ctrl(struct host_cmd_ds_command *resp,
 				void *data_buf)
 {
-	struct mwifiex_ds_11n_amsdu_aggr_ctrl *amsdu_aggr_ctrl = NULL;
+	struct mwifiex_ds_11n_amsdu_aggr_ctrl *amsdu_aggr_ctrl;
 	struct host_cmd_ds_amsdu_aggr_ctrl *amsdu_ctrl =
 		&resp->params.amsdu_aggr_ctrl;
 
@@ -461,8 +461,7 @@ mwifiex_cfg_tx_buf(struct mwifiex_private *priv,
 		   struct mwifiex_bssdescriptor *bss_desc)
 {
 	u16 max_amsdu = MWIFIEX_TX_DATA_BUF_SIZE_2K;
-	u16 tx_buf = 0;
-	u16 curr_tx_buf_size = 0;
+	u16 tx_buf, curr_tx_buf_size = 0;
 
 	if (bss_desc->bcn_ht_cap) {
 		if (le16_to_cpu(bss_desc->bcn_ht_cap->cap_info) &
diff --git a/drivers/net/wireless/mwifiex/11n_aggr.c b/drivers/net/wireless/mwifiex/11n_aggr.c
index c9fb0627de4..12cf4246f96 100644
--- a/drivers/net/wireless/mwifiex/11n_aggr.c
+++ b/drivers/net/wireless/mwifiex/11n_aggr.c
@@ -60,7 +60,7 @@ mwifiex_11n_form_amsdu_pkt(struct sk_buff *skb_aggr,
 			 * later with ethertype
 			 */
 	};
-	struct tx_packet_hdr *tx_header = NULL;
+	struct tx_packet_hdr *tx_header;
 
 	skb_put(skb_aggr, sizeof(*tx_header));
 
@@ -182,7 +182,7 @@ int mwifiex_11n_deaggregate_pkt(struct mwifiex_private *priv,
 	struct mwifiex_rxinfo *rx_info = MWIFIEX_SKB_RXCB(skb);
 	struct rxpd *local_rx_pd = (struct rxpd *) skb->data;
 	struct sk_buff *skb_daggr;
-	struct mwifiex_rxinfo *rx_info_daggr = NULL;
+	struct mwifiex_rxinfo *rx_info_daggr;
 	int ret = -1;
 	struct rx_packet_hdr *rx_pkt_hdr;
 	struct mwifiex_adapter *adapter = priv->adapter;
@@ -285,8 +285,7 @@ mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv,
 	struct mwifiex_adapter *adapter = priv->adapter;
 	struct sk_buff *skb_aggr, *skb_src;
 	struct mwifiex_txinfo *tx_info_aggr, *tx_info_src;
-	int pad = 0;
-	int ret = 0;
+	int pad = 0, ret;
 	struct mwifiex_tx_param tx_param;
 	struct txpd *ptx_pd = NULL;
 
diff --git a/drivers/net/wireless/mwifiex/11n_rxreorder.c b/drivers/net/wireless/mwifiex/11n_rxreorder.c
index a93c03fdea8..e5dfdc39a92 100644
--- a/drivers/net/wireless/mwifiex/11n_rxreorder.c
+++ b/drivers/net/wireless/mwifiex/11n_rxreorder.c
@@ -39,7 +39,7 @@ mwifiex_11n_dispatch_pkt_until_start_win(struct mwifiex_private *priv,
 					 *rx_reor_tbl_ptr, int start_win)
 {
 	int no_pkt_to_send, i;
-	void *rx_tmp_ptr = NULL;
+	void *rx_tmp_ptr;
 	unsigned long flags;
 
 	no_pkt_to_send = (start_win > rx_reor_tbl_ptr->start_win) ?
@@ -88,7 +88,7 @@ mwifiex_11n_scan_and_dispatch(struct mwifiex_private *priv,
 			      struct mwifiex_rx_reorder_tbl *rx_reor_tbl_ptr)
 {
 	int i, j, xchg;
-	void *rx_tmp_ptr = NULL;
+	void *rx_tmp_ptr;
 	unsigned long flags;
 
 	for (i = 0; i < rx_reor_tbl_ptr->win_size; ++i) {
@@ -335,8 +335,8 @@ int mwifiex_cmd_11n_addba_rsp_gen(struct mwifiex_private *priv,
 		&cmd->params.add_ba_rsp;
 	struct host_cmd_ds_11n_addba_req *cmd_addba_req =
 		(struct host_cmd_ds_11n_addba_req *) data_buf;
-	u8 tid = 0;
-	int win_size = 0;
+	u8 tid;
+	int win_size;
 	uint16_t block_ack_param_set;
 
 	cmd->command = cpu_to_le16(HostCmd_CMD_11N_ADDBA_RSP);
@@ -406,9 +406,8 @@ int mwifiex_11n_rx_reorder_pkt(struct mwifiex_private *priv,
 				u8 *ta, u8 pkt_type, void *payload)
 {
 	struct mwifiex_rx_reorder_tbl *rx_reor_tbl_ptr;
-	int start_win, end_win, win_size;
-	int ret = 0;
-	u16 pkt_index = 0;
+	int start_win, end_win, win_size, ret;
+	u16 pkt_index;
 
 	rx_reor_tbl_ptr =
 		mwifiex_11n_get_rx_reorder_tbl((struct mwifiex_private *) priv,
@@ -540,7 +539,7 @@ int mwifiex_ret_11n_addba_resp(struct mwifiex_private *priv,
 		(struct host_cmd_ds_11n_addba_rsp *)
 		&resp->params.add_ba_rsp;
 	int tid, win_size;
-	struct mwifiex_rx_reorder_tbl *rx_reor_tbl_ptr = NULL;
+	struct mwifiex_rx_reorder_tbl *rx_reor_tbl_ptr;
 	uint16_t block_ack_param_set;
 
 	block_ack_param_set = le16_to_cpu(add_ba_rsp->block_ack_param_set);
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 77a80296b6c..0c0116374d7 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -77,18 +77,15 @@ mwifiex_channels_to_cfg80211_channel_type(int channel_type)
 static int
 mwifiex_is_alg_wep(u32 cipher)
 {
-	int alg = 0;
-
 	switch (cipher) {
 	case WLAN_CIPHER_SUITE_WEP40:
 	case WLAN_CIPHER_SUITE_WEP104:
-		alg = 1;
-		break;
+		return 1;
 	default:
-		alg = 0;
 		break;
 	}
-	return alg;
+
+	return 0;
 }
 
 /*
@@ -408,7 +405,7 @@ mwifiex_cfg80211_set_channel(struct wiphy *wiphy, struct net_device *dev,
 static int
 mwifiex_set_frag(struct mwifiex_private *priv, u32 frag_thr)
 {
-	int ret = 0;
+	int ret;
 
 	if (frag_thr < MWIFIEX_FRAG_MIN_VALUE
 	    || frag_thr > MWIFIEX_FRAG_MAX_VALUE)
@@ -449,7 +446,6 @@ static int
 mwifiex_cfg80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
 {
 	struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
-
 	int ret = 0;
 
 	if (changed & WIPHY_PARAM_RTS_THRESHOLD) {
@@ -473,7 +469,7 @@ mwifiex_cfg80211_change_virtual_intf(struct wiphy *wiphy,
 				     enum nl80211_iftype type, u32 *flags,
 				     struct vif_params *params)
 {
-	int ret = 0;
+	int ret;
 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
 
 	if (priv->bss_mode == type) {
@@ -717,7 +713,7 @@ static int mwifiex_cfg80211_inform_ibss_bss(struct mwifiex_private *priv)
 {
 	struct ieee80211_channel *chan;
 	struct mwifiex_bss_info bss_info;
-	int ie_len = 0;
+	int ie_len;
 	u8 ie_buf[IEEE80211_MAX_SSID_LEN + sizeof(struct ieee_types_header)];
 
 	if (mwifiex_get_bss_info(priv, &bss_info))
@@ -903,8 +899,7 @@ mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len, u8 *ssid,
 {
 	struct mwifiex_802_11_ssid req_ssid;
 	struct mwifiex_ssid_bssid ssid_bssid;
-	int ret = 0;
-	int auth_type = 0;
+	int ret, auth_type = 0;
 
 	memset(&req_ssid, 0, sizeof(struct mwifiex_802_11_ssid));
 	memset(&ssid_bssid, 0, sizeof(struct mwifiex_ssid_bssid));
@@ -1247,8 +1242,8 @@ static struct cfg80211_ops mwifiex_cfg80211_ops = {
 int mwifiex_register_cfg80211(struct net_device *dev, u8 *mac,
 			      struct mwifiex_private *priv)
 {
-	int ret = 0;
-	void *wdev_priv = NULL;
+	int ret;
+	void *wdev_priv;
 	struct wireless_dev *wdev;
 
 	wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index 776146a104e..b75cc9271a1 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -128,7 +128,7 @@ static int mwifiex_dnld_cmd_to_fw(struct mwifiex_private *priv,
 {
 
 	struct mwifiex_adapter *adapter = priv->adapter;
-	int ret = 0;
+	int ret;
 	struct host_cmd_ds_command *host_cmd;
 	uint16_t cmd_code;
 	uint16_t cmd_size;
@@ -222,8 +222,8 @@ static int mwifiex_dnld_cmd_to_fw(struct mwifiex_private *priv,
  */
 static int mwifiex_dnld_sleep_confirm_cmd(struct mwifiex_adapter *adapter)
 {
-	int ret = 0;
-	u16 cmd_len = 0;
+	int ret;
+	u16 cmd_len;
 	struct mwifiex_private *priv;
 	struct mwifiex_opt_sleep_confirm_buffer *sleep_cfm_buf =
 				(struct mwifiex_opt_sleep_confirm_buffer *)
@@ -364,13 +364,13 @@ int mwifiex_free_cmd_buffer(struct mwifiex_adapter *adapter)
  */
 int mwifiex_process_event(struct mwifiex_adapter *adapter)
 {
-	int ret = 0;
+	int ret;
 	struct mwifiex_private *priv =
 		mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
 	struct sk_buff *skb = adapter->event_skb;
 	u32 eventcause = adapter->event_cause;
 	struct timeval tstamp;
-	struct mwifiex_rxinfo *rx_info = NULL;
+	struct mwifiex_rxinfo *rx_info;
 
 	/* Save the last event to debug log */
 	adapter->dbg.last_event_index =
@@ -446,10 +446,10 @@ int mwifiex_send_cmd_sync(struct mwifiex_private *priv, uint16_t cmd_no,
 int mwifiex_send_cmd_async(struct mwifiex_private *priv, uint16_t cmd_no,
 			   u16 cmd_action, u32 cmd_oid, void *data_buf)
 {
-	int ret = 0;
+	int ret;
 	struct mwifiex_adapter *adapter = priv->adapter;
-	struct cmd_ctrl_node *cmd_node = NULL;
-	struct host_cmd_ds_command *cmd_ptr = NULL;
+	struct cmd_ctrl_node *cmd_node;
+	struct host_cmd_ds_command *cmd_ptr;
 
 	if (!adapter) {
 		pr_err("PREP_CMD: adapter is NULL\n");
@@ -605,8 +605,8 @@ mwifiex_insert_cmd_to_pending_q(struct mwifiex_adapter *adapter,
  */
 int mwifiex_exec_next_cmd(struct mwifiex_adapter *adapter)
 {
-	struct mwifiex_private *priv = NULL;
-	struct cmd_ctrl_node *cmd_node = NULL;
+	struct mwifiex_private *priv;
+	struct cmd_ctrl_node *cmd_node;
 	int ret = 0;
 	struct host_cmd_ds_command *host_cmd;
 	unsigned long cmd_flags;
@@ -673,7 +673,7 @@ int mwifiex_exec_next_cmd(struct mwifiex_adapter *adapter)
  */
 int mwifiex_process_cmdresp(struct mwifiex_adapter *adapter)
 {
-	struct host_cmd_ds_command *resp = NULL;
+	struct host_cmd_ds_command *resp;
 	struct mwifiex_private *priv =
 		mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
 	int ret = 0;
@@ -805,7 +805,7 @@ mwifiex_cmd_timeout_func(unsigned long function_context)
 {
 	struct mwifiex_adapter *adapter =
 		(struct mwifiex_adapter *) function_context;
-	struct cmd_ctrl_node *cmd_node = NULL;
+	struct cmd_ctrl_node *cmd_node;
 	struct timeval tstamp;
 
 	adapter->num_cmd_timeout++;
@@ -877,7 +877,7 @@ mwifiex_cmd_timeout_func(unsigned long function_context)
 void
 mwifiex_cancel_all_pending_cmd(struct mwifiex_adapter *adapter)
 {
-	struct cmd_ctrl_node *cmd_node = NULL, *tmp_node = NULL;
+	struct cmd_ctrl_node *cmd_node = NULL, *tmp_node;
 	unsigned long flags;
 
 	/* Cancel current cmd */
@@ -1160,7 +1160,7 @@ int mwifiex_cmd_enh_power_mode(struct mwifiex_private *priv,
 {
 	struct host_cmd_ds_802_11_ps_mode_enh *psmode_enh =
 		&cmd->params.psmode_enh;
-	u8 *tlv = NULL;
+	u8 *tlv;
 	u16 cmd_size = 0;
 
 	cmd->command = cpu_to_le16(HostCmd_CMD_802_11_PS_MODE_ENH);
diff --git a/drivers/net/wireless/mwifiex/debugfs.c b/drivers/net/wireless/mwifiex/debugfs.c
index 7ddcb062f10..46d65e02c7b 100644
--- a/drivers/net/wireless/mwifiex/debugfs.c
+++ b/drivers/net/wireless/mwifiex/debugfs.c
@@ -193,7 +193,7 @@ mwifiex_info_read(struct file *file, char __user *ubuf,
 	unsigned long page = get_zeroed_page(GFP_KERNEL);
 	char *p = (char *) page, fmt[64];
 	struct mwifiex_bss_info info;
-	ssize_t ret = 0;
+	ssize_t ret;
 	int i = 0;
 
 	if (!p)
@@ -288,7 +288,7 @@ mwifiex_getlog_read(struct file *file, char __user *ubuf,
 		(struct mwifiex_private *) file->private_data;
 	unsigned long page = get_zeroed_page(GFP_KERNEL);
 	char *p = (char *) page;
-	ssize_t ret = 0;
+	ssize_t ret;
 	struct mwifiex_ds_get_stats stats;
 
 	if (!p)
@@ -400,7 +400,7 @@ mwifiex_debug_read(struct file *file, char __user *ubuf,
 	struct mwifiex_debug_data *d = &items[0];
 	unsigned long page = get_zeroed_page(GFP_KERNEL);
 	char *p = (char *) page;
-	ssize_t ret = 0;
+	ssize_t ret;
 	size_t size, addr;
 	long val;
 	int i, j;
@@ -507,7 +507,7 @@ mwifiex_regrdwr_write(struct file *file,
 	unsigned long addr = get_zeroed_page(GFP_KERNEL);
 	char *buf = (char *) addr;
 	size_t buf_size = min(count, (size_t) (PAGE_SIZE - 1));
-	int ret = 0;
+	int ret;
 	u32 reg_type = 0, reg_offset = 0, reg_value = UINT_MAX;
 
 	if (!buf)
@@ -650,7 +650,7 @@ mwifiex_rdeeprom_read(struct file *file, char __user *ubuf,
 		(struct mwifiex_private *) file->private_data;
 	unsigned long addr = get_zeroed_page(GFP_KERNEL);
 	char *buf = (char *) addr;
-	int pos = 0, ret = 0, i = 0;
+	int pos = 0, ret = 0, i;
 	u8 value[MAX_EEPROM_DATA];
 
 	if (!buf)
diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c
index fc2c0c5728d..27ad72b291b 100644
--- a/drivers/net/wireless/mwifiex/init.c
+++ b/drivers/net/wireless/mwifiex/init.c
@@ -151,7 +151,7 @@ static int mwifiex_init_priv(struct mwifiex_private *priv)
  */
 static int mwifiex_allocate_adapter(struct mwifiex_adapter *adapter)
 {
-	int ret = 0;
+	int ret;
 	u32 buf_size;
 	struct mwifiex_bssdescriptor *temp_scan_table;
 
@@ -342,9 +342,8 @@ mwifiex_free_adapter(struct mwifiex_adapter *adapter)
  */
 int mwifiex_init_lock_list(struct mwifiex_adapter *adapter)
 {
-	struct mwifiex_private   *priv = NULL;
-	s32           i = 0;
-	u32           j = 0;
+	struct mwifiex_private *priv;
+	s32 i, j;
 
 	spin_lock_init(&adapter->mwifiex_lock);
 	spin_lock_init(&adapter->int_lock);
@@ -400,9 +399,8 @@ int mwifiex_init_lock_list(struct mwifiex_adapter *adapter)
  */
 void mwifiex_free_lock_list(struct mwifiex_adapter *adapter)
 {
-	struct mwifiex_private *priv = NULL;
-	s32           i = 0;
-	s32           j = 0;
+	struct mwifiex_private *priv;
+	s32 i, j;
 
 	/* Free lists */
 	list_del(&adapter->cmd_free_q);
@@ -436,10 +434,9 @@ void mwifiex_free_lock_list(struct mwifiex_adapter *adapter)
  */
 int mwifiex_init_fw(struct mwifiex_adapter *adapter)
 {
-	int ret = 0;
-	struct mwifiex_private *priv = NULL;
-	u8 i = 0;
-	u8 first_sta = true;
+	int ret;
+	struct mwifiex_private *priv;
+	u8 i, first_sta = true;
 	int is_cmd_pend_q_empty;
 	unsigned long flags;
 
@@ -497,8 +494,7 @@ static void mwifiex_delete_bss_prio_tbl(struct mwifiex_private *priv)
 {
 	int i;
 	struct mwifiex_adapter *adapter = priv->adapter;
-	struct mwifiex_bss_prio_node *bssprio_node = NULL, *tmp_node = NULL,
-								**cur = NULL;
+	struct mwifiex_bss_prio_node *bssprio_node, *tmp_node, **cur;
 	struct list_head *head;
 	spinlock_t *lock;
 	unsigned long flags;
@@ -552,8 +548,8 @@ int
 mwifiex_shutdown_drv(struct mwifiex_adapter *adapter)
 {
 	int ret = -EINPROGRESS;
-	struct mwifiex_private *priv = NULL;
-	s32 i = 0;
+	struct mwifiex_private *priv;
+	s32 i;
 	unsigned long flags;
 
 	/* mwifiex already shutdown */
@@ -608,9 +604,8 @@ mwifiex_shutdown_drv(struct mwifiex_adapter *adapter)
 int mwifiex_dnld_fw(struct mwifiex_adapter *adapter,
 		    struct mwifiex_fw_image *pmfw)
 {
-	int ret = 0;
+	int ret, winner;
 	u32 poll_num = 1;
-	int winner;
 
 	/* Check if firmware is already running */
 	ret = adapter->if_ops.check_fw_status(adapter, poll_num, &winner);
diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c
index 85fca5eb419..5eab3dc29b1 100644
--- a/drivers/net/wireless/mwifiex/join.c
+++ b/drivers/net/wireless/mwifiex/join.c
@@ -143,9 +143,8 @@ mwifiex_cmd_append_tsf_tlv(struct mwifiex_private *priv, u8 **buffer,
 static int mwifiex_get_common_rates(struct mwifiex_private *priv, u8 *rate1,
 				    u32 rate1_size, u8 *rate2, u32 rate2_size)
 {
-	int ret = 0;
-	u8 *ptr = rate1;
-	u8 *tmp = NULL;
+	int ret;
+	u8 *ptr = rate1, *tmp;
 	u32 i, j;
 
 	tmp = kmalloc(rate1_size, GFP_KERNEL);
@@ -203,7 +202,7 @@ mwifiex_setup_rates_from_bssdesc(struct mwifiex_private *priv,
 				 u8 *out_rates, u32 *out_rates_size)
 {
 	u8 card_rates[MWIFIEX_SUPPORTED_RATES];
-	u32 card_rates_size = 0;
+	u32 card_rates_size;
 
 	/* Copy AP supported rates */
 	memcpy(out_rates, bss_desc->supported_rates, MWIFIEX_SUPPORTED_RATES);
@@ -1359,7 +1358,7 @@ int mwifiex_adhoc_join(struct mwifiex_private *priv,
 static int mwifiex_deauthenticate_infra(struct mwifiex_private *priv, u8 *mac)
 {
 	u8 mac_address[ETH_ALEN];
-	int ret = 0;
+	int ret;
 	u8 zero_mac[ETH_ALEN] = { 0, 0, 0, 0, 0, 0 };
 
 	if (mac) {
diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index c5971880e7b..38f912b8fce 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -150,7 +150,7 @@ error:
  */
 static int mwifiex_unregister(struct mwifiex_adapter *adapter)
 {
-	s32 i = 0;
+	s32 i;
 
 	del_timer(&adapter->cmd_timer);
 
@@ -379,8 +379,7 @@ static void mwifiex_free_adapter(struct mwifiex_adapter *adapter)
  */
 static int mwifiex_init_hw_fw(struct mwifiex_adapter *adapter)
 {
-	int ret = 0;
-	int err;
+	int ret, err;
 	struct mwifiex_fw_image fw;
 
 	memset(&fw, 0, sizeof(struct mwifiex_fw_image));
@@ -449,7 +448,7 @@ done:
 static void
 mwifiex_fill_buffer(struct sk_buff *skb)
 {
-	struct ethhdr *eth = NULL;
+	struct ethhdr *eth;
 	struct iphdr *iph;
 	struct timeval tv;
 	u8 tid = 0;
@@ -510,7 +509,7 @@ static int
 mwifiex_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
-	struct sk_buff *new_skb = NULL;
+	struct sk_buff *new_skb;
 	struct mwifiex_txinfo *tx_info;
 
 	dev_dbg(priv->adapter->dev, "data: %lu BSS(%d): Data <= kernel\n",
@@ -571,7 +570,7 @@ mwifiex_set_mac_address(struct net_device *dev, void *addr)
 {
 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
 	struct sockaddr *hw_addr = (struct sockaddr *) addr;
-	int ret = 0;
+	int ret;
 
 	memcpy(priv->curr_addr, hw_addr->sa_data, ETH_ALEN);
 
@@ -696,9 +695,9 @@ static struct mwifiex_private *mwifiex_add_interface(
 			struct mwifiex_adapter *adapter,
 			u8 bss_index, u8 bss_type)
 {
-	struct net_device *dev = NULL;
-	struct mwifiex_private *priv = NULL;
-	void *mdev_priv = NULL;
+	struct net_device *dev;
+	struct mwifiex_private *priv;
+	void *mdev_priv;
 
 	dev = alloc_netdev_mq(sizeof(struct mwifiex_private *), "mlan%d",
 			      ether_setup, 1);
@@ -763,7 +762,7 @@ error:
 static void
 mwifiex_remove_interface(struct mwifiex_adapter *adapter, u8 bss_index)
 {
-	struct net_device *dev = NULL;
+	struct net_device *dev;
 	struct mwifiex_private *priv = adapter->priv[bss_index];
 
 	if (!priv)
diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index 31a52957880..4968974f342 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -117,8 +117,8 @@ mwifiex_search_oui_in_ie(struct ie_body *iebody, u8 *oui)
 static u8
 mwifiex_is_rsn_oui_present(struct mwifiex_bssdescriptor *bss_desc, u32 cipher)
 {
-	u8 *oui = NULL;
-	struct ie_body *iebody = NULL;
+	u8 *oui;
+	struct ie_body *iebody;
 	u8 ret = MWIFIEX_OUI_NOT_PRESENT;
 
 	if (((bss_desc->bcn_rsn_ie) && ((*(bss_desc->bcn_rsn_ie)).
@@ -144,8 +144,8 @@ mwifiex_is_rsn_oui_present(struct mwifiex_bssdescriptor *bss_desc, u32 cipher)
 static u8
 mwifiex_is_wpa_oui_present(struct mwifiex_bssdescriptor *bss_desc, u32 cipher)
 {
-	u8 *oui = NULL;
-	struct ie_body *iebody = NULL;
+	u8 *oui;
+	struct ie_body *iebody;
 	u8 ret = MWIFIEX_OUI_NOT_PRESENT;
 
 	if (((bss_desc->bcn_wpa_ie) && ((*(bss_desc->bcn_wpa_ie)).
@@ -181,7 +181,7 @@ int mwifiex_find_best_bss(struct mwifiex_private *priv,
 			  struct mwifiex_ssid_bssid *ssid_bssid)
 {
 	struct mwifiex_ssid_bssid tmp_ssid_bssid;
-	u8 *mac = NULL;
+	u8 *mac;
 
 	if (!ssid_bssid)
 		return -1;
@@ -213,7 +213,7 @@ int mwifiex_find_best_bss(struct mwifiex_private *priv,
 int mwifiex_set_user_scan_ioctl(struct mwifiex_private *priv,
 				struct mwifiex_user_scan_cfg *scan_req)
 {
-	int status = 0;
+	int status;
 
 	priv->adapter->cmd_wait_q.condition = false;
 
@@ -2253,8 +2253,8 @@ int mwifiex_scan_networks(struct mwifiex_private *priv,
 {
 	int ret = 0;
 	struct mwifiex_adapter *adapter = priv->adapter;
-	struct cmd_ctrl_node *cmd_node = NULL;
-	union mwifiex_scan_cmd_config_tlv *scan_cfg_out = NULL;
+	struct cmd_ctrl_node *cmd_node;
+	union mwifiex_scan_cmd_config_tlv *scan_cfg_out;
 	struct mwifiex_ie_types_chan_list_param_set *chan_list_out;
 	u32 buf_size;
 	struct mwifiex_chan_scan_param_set *scan_chan_list;
@@ -2404,8 +2404,8 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
 {
 	int ret = 0;
 	struct mwifiex_adapter *adapter = priv->adapter;
-	struct cmd_ctrl_node *cmd_node = NULL;
-	struct host_cmd_ds_802_11_scan_rsp *scan_rsp = NULL;
+	struct cmd_ctrl_node *cmd_node;
+	struct host_cmd_ds_802_11_scan_rsp *scan_rsp;
 	struct mwifiex_bssdescriptor *bss_new_entry = NULL;
 	struct mwifiex_ie_types_data *tlv_data;
 	struct mwifiex_ie_types_tsf_timestamp *tsf_tlv;
@@ -2906,7 +2906,7 @@ static int mwifiex_scan_specific_ssid(struct mwifiex_private *priv,
 int mwifiex_request_scan(struct mwifiex_private *priv,
 			 struct mwifiex_802_11_ssid *req_ssid)
 {
-	int ret = 0;
+	int ret;
 
 	if (down_interruptible(&priv->async_sem)) {
 		dev_err(priv->adapter->dev, "%s: acquire semaphore\n",
diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index 5148d0e0fad..470dbaaeaa0 100644
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -46,7 +46,7 @@ static struct semaphore add_remove_card_sem;
 static int
 mwifiex_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id)
 {
-	int ret = 0;
+	int ret;
 	struct sdio_mmc_card *card = NULL;
 
 	pr_debug("info: vendor=0x%4.04X device=0x%4.04X class=%d function=%d\n",
@@ -119,7 +119,7 @@ static int mwifiex_sdio_suspend(struct device *dev)
 {
 	struct sdio_func *func = dev_to_sdio_func(dev);
 	struct sdio_mmc_card *card;
-	struct mwifiex_adapter *adapter = NULL;
+	struct mwifiex_adapter *adapter;
 	mmc_pm_flag_t pm_flag = 0;
 	int hs_actived = 0;
 	int i;
@@ -177,7 +177,7 @@ static int mwifiex_sdio_resume(struct device *dev)
 {
 	struct sdio_func *func = dev_to_sdio_func(dev);
 	struct sdio_mmc_card *card;
-	struct mwifiex_adapter *adapter = NULL;
+	struct mwifiex_adapter *adapter;
 	mmc_pm_flag_t pm_flag = 0;
 	int i;
 
@@ -420,7 +420,7 @@ static int mwifiex_write_data_to_card(struct mwifiex_adapter *adapter,
 				      u8 *payload, u32 pkt_len, u32 port)
 {
 	u32 i = 0;
-	int ret = 0;
+	int ret;
 
 	do {
 		ret = mwifiex_write_data_sync(adapter, payload, pkt_len, port);
@@ -531,7 +531,7 @@ static int
 mwifiex_sdio_poll_card_status(struct mwifiex_adapter *adapter, u8 bits)
 {
 	u32 tries;
-	u32 cs = 0;
+	u32 cs;
 
 	for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
 		if (mwifiex_read_reg(adapter, CARD_STATUS_REG, &cs))
@@ -553,7 +553,7 @@ mwifiex_sdio_poll_card_status(struct mwifiex_adapter *adapter, u8 bits)
 static int
 mwifiex_sdio_read_fw_status(struct mwifiex_adapter *adapter, u16 *dat)
 {
-	u32 fws0 = 0, fws1 = 0;
+	u32 fws0, fws1;
 
 	if (mwifiex_read_reg(adapter, CARD_FW_STATUS0_REG, &fws0))
 		return -1;
@@ -574,7 +574,7 @@ mwifiex_sdio_read_fw_status(struct mwifiex_adapter *adapter, u16 *dat)
  */
 static int mwifiex_sdio_disable_host_int(struct mwifiex_adapter *adapter)
 {
-	u32 host_int_mask = 0;
+	u32 host_int_mask;
 
 	/* Read back the host_int_mask register */
 	if (mwifiex_read_reg(adapter, HOST_INT_MASK_REG, &host_int_mask))
@@ -614,7 +614,7 @@ static int mwifiex_sdio_card_to_host(struct mwifiex_adapter *adapter,
 				     u32 *type, u8 *buffer,
 				     u32 npayload, u32 ioport)
 {
-	int ret = 0;
+	int ret;
 	u32 nb;
 
 	if (!buffer) {
@@ -652,14 +652,14 @@ static int mwifiex_sdio_card_to_host(struct mwifiex_adapter *adapter,
 static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter,
 				    struct mwifiex_fw_image *fw)
 {
-	int ret = 0;
+	int ret;
 	u8 *firmware = fw->fw_buf;
 	u32 firmware_len = fw->fw_len;
 	u32 offset = 0;
 	u32 base0, base1;
 	u8 *fwbuf;
 	u16 len = 0;
-	u32 txlen = 0, tx_blocks = 0, tries = 0;
+	u32 txlen, tx_blocks = 0, tries;
 	u32 i = 0;
 
 	if (!firmware_len) {
@@ -830,7 +830,7 @@ static int mwifiex_check_fw_status(struct mwifiex_adapter *adapter,
 static void mwifiex_interrupt_status(struct mwifiex_adapter *adapter)
 {
 	struct sdio_mmc_card *card = adapter->card;
-	u32 sdio_ireg = 0;
+	u32 sdio_ireg;
 	unsigned long flags;
 
 	if (mwifiex_read_data_sync(adapter, card->mp_regs, MAX_MP_REGS,
@@ -964,7 +964,7 @@ static int mwifiex_sdio_card_to_host_mp_aggr(struct mwifiex_adapter *adapter,
 	s32 f_do_rx_cur = 0;
 	s32 f_aggr_cur = 0;
 	struct sk_buff *skb_deaggr;
-	u32 pind = 0;
+	u32 pind;
 	u32 pkt_len, pkt_type = 0;
 	u8 *curr_ptr;
 	u32 rx_len = skb->len;
@@ -1114,7 +1114,7 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
 	struct sdio_mmc_card *card = adapter->card;
 	int ret = 0;
 	u8 sdio_ireg;
-	struct sk_buff *skb = NULL;
+	struct sk_buff *skb;
 	u8 port = CTRL_PORT;
 	u32 len_reg_l, len_reg_u;
 	u32 rx_blocks;
@@ -1377,7 +1377,7 @@ static int mwifiex_sdio_host_to_card(struct mwifiex_adapter *adapter,
 				     struct mwifiex_tx_param *tx_param)
 {
 	struct sdio_mmc_card *card = adapter->card;
-	int ret = 0;
+	int ret;
 	u32 buf_block_len;
 	u32 blk_size;
 	u8 port = CTRL_PORT;
@@ -1560,7 +1560,7 @@ static int mwifiex_init_sdio(struct mwifiex_adapter *adapter)
 {
 	struct sdio_mmc_card *card = adapter->card;
 	int ret;
-	u32 sdio_ireg = 0;
+	u32 sdio_ireg;
 
 	/*
 	 * Read the HOST_INT_STATUS_REG for ACK the first interrupt got
diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifiex/sta_cmd.c
index 33c8ba1f5e3..8af3a78d272 100644
--- a/drivers/net/wireless/mwifiex/sta_cmd.c
+++ b/drivers/net/wireless/mwifiex/sta_cmd.c
@@ -274,8 +274,8 @@ static int mwifiex_cmd_tx_rate_cfg(struct mwifiex_private *priv,
 static int mwifiex_cmd_tx_power_cfg(struct host_cmd_ds_command *cmd,
 				    u16 cmd_action, void *data_buf)
 {
-	struct mwifiex_types_power_group *pg_tlv = NULL;
-	struct host_cmd_ds_txpwr_cfg *txp = NULL;
+	struct mwifiex_types_power_group *pg_tlv;
+	struct host_cmd_ds_txpwr_cfg *txp;
 	struct host_cmd_ds_txpwr_cfg *cmd_txp_cfg = &cmd->params.txp_cfg;
 
 	cmd->command = cpu_to_le16(HostCmd_CMD_TXPWR_CFG);
@@ -478,7 +478,7 @@ mwifiex_set_keyparamset_wep(struct mwifiex_private *priv,
 			    struct mwifiex_ie_type_key_param_set *key_param_set,
 			    u16 *key_param_len)
 {
-	int cur_key_param_len = 0;
+	int cur_key_param_len;
 	u8 i;
 
 	/* Multi-key_param_set TLV is supported */
@@ -1121,7 +1121,7 @@ int mwifiex_sta_prepare_cmd(struct mwifiex_private *priv, uint16_t cmd_no,
  */
 int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta)
 {
-	int ret = 0;
+	int ret;
 	u16 enable = true;
 	struct mwifiex_ds_11n_amsdu_aggr_ctrl amsdu_aggr_ctrl;
 	struct mwifiex_ds_auto_ds auto_ds;
diff --git a/drivers/net/wireless/mwifiex/sta_cmdresp.c b/drivers/net/wireless/mwifiex/sta_cmdresp.c
index 7f4f10b752f..d08f76429a0 100644
--- a/drivers/net/wireless/mwifiex/sta_cmdresp.c
+++ b/drivers/net/wireless/mwifiex/sta_cmdresp.c
@@ -43,7 +43,7 @@ static void
 mwifiex_process_cmdresp_error(struct mwifiex_private *priv,
 			      struct host_cmd_ds_command *resp)
 {
-	struct cmd_ctrl_node *cmd_node = NULL, *tmp_node = NULL;
+	struct cmd_ctrl_node *cmd_node = NULL, *tmp_node;
 	struct mwifiex_adapter *adapter = priv->adapter;
 	struct host_cmd_ds_802_11_ps_mode_enh *pm;
 	unsigned long flags;
@@ -124,7 +124,7 @@ static int mwifiex_ret_802_11_rssi_info(struct mwifiex_private *priv,
 {
 	struct host_cmd_ds_802_11_rssi_info_rsp *rssi_info_rsp =
 		&resp->params.rssi_info_rsp;
-	struct mwifiex_ds_get_signal *signal = NULL;
+	struct mwifiex_ds_get_signal *signal;
 
 	priv->data_rssi_last = le16_to_cpu(rssi_info_rsp->data_rssi_last);
 	priv->data_nf_last = le16_to_cpu(rssi_info_rsp->data_nf_last);
@@ -232,7 +232,7 @@ static int mwifiex_ret_get_log(struct mwifiex_private *priv,
 {
 	struct host_cmd_ds_802_11_get_log *get_log =
 		(struct host_cmd_ds_802_11_get_log *) &resp->params.get_log;
-	struct mwifiex_ds_get_stats *stats = NULL;
+	struct mwifiex_ds_get_stats *stats;
 
 	if (data_buf) {
 		stats = (struct mwifiex_ds_get_stats *) data_buf;
@@ -280,10 +280,10 @@ static int mwifiex_ret_tx_rate_cfg(struct mwifiex_private *priv,
 				   struct host_cmd_ds_command *resp,
 				   void *data_buf)
 {
-	struct mwifiex_rate_cfg *ds_rate = NULL;
+	struct mwifiex_rate_cfg *ds_rate;
 	struct host_cmd_ds_tx_rate_cfg *rate_cfg = &resp->params.tx_rate_cfg;
 	struct mwifiex_rate_scope *rate_scope;
-	struct mwifiex_ie_types_header *head = NULL;
+	struct mwifiex_ie_types_header *head;
 	u16 tlv, tlv_buf_len;
 	u8 *tlv_buf;
 	u32 i;
@@ -368,9 +368,9 @@ static int mwifiex_ret_tx_rate_cfg(struct mwifiex_private *priv,
  */
 static int mwifiex_get_power_level(struct mwifiex_private *priv, void *data_buf)
 {
-	int length = -1, max_power = -1, min_power = -1;
-	struct mwifiex_types_power_group *pg_tlv_hdr = NULL;
-	struct mwifiex_power_group *pg = NULL;
+	int length, max_power = -1, min_power = -1;
+	struct mwifiex_types_power_group *pg_tlv_hdr;
+	struct mwifiex_power_group *pg;
 
 	if (data_buf) {
 		pg_tlv_hdr =
@@ -418,8 +418,8 @@ static int mwifiex_ret_tx_power_cfg(struct mwifiex_private *priv,
 {
 	struct mwifiex_adapter *adapter = priv->adapter;
 	struct host_cmd_ds_txpwr_cfg *txp_cfg = &resp->params.txp_cfg;
-	struct mwifiex_types_power_group *pg_tlv_hdr = NULL;
-	struct mwifiex_power_group *pg = NULL;
+	struct mwifiex_types_power_group *pg_tlv_hdr;
+	struct mwifiex_power_group *pg;
 	u16 action = le16_to_cpu(txp_cfg->action);
 
 	switch (action) {
@@ -593,7 +593,7 @@ static int mwifiex_ret_802_11d_domain_info(struct mwifiex_private *priv,
 		&resp->params.domain_info_resp;
 	struct mwifiex_ietypes_domain_param_set *domain = &domain_info->domain;
 	u16 action = le16_to_cpu(domain_info->action);
-	u8 no_of_triplet = 0;
+	u8 no_of_triplet;
 
 	no_of_triplet = (u8) ((le16_to_cpu(domain->header.len) -
 					IEEE80211_COUNTRY_STRING_LEN) /
@@ -661,7 +661,7 @@ static int mwifiex_ret_ver_ext(struct mwifiex_private *priv,
 			       void *data_buf)
 {
 	struct host_cmd_ds_version_ext *ver_ext = &resp->params.verext;
-	struct host_cmd_ds_version_ext *version_ext = NULL;
+	struct host_cmd_ds_version_ext *version_ext;
 
 	if (data_buf) {
 		version_ext = (struct host_cmd_ds_version_ext *)data_buf;
@@ -682,8 +682,8 @@ static int mwifiex_ret_ver_ext(struct mwifiex_private *priv,
 static int mwifiex_ret_reg_access(u16 type, struct host_cmd_ds_command *resp,
 				  void *data_buf)
 {
-	struct mwifiex_ds_reg_rw *reg_rw = NULL;
-	struct mwifiex_ds_read_eeprom *eeprom = NULL;
+	struct mwifiex_ds_reg_rw *reg_rw;
+	struct mwifiex_ds_read_eeprom *eeprom;
 
 	if (data_buf) {
 		reg_rw = (struct mwifiex_ds_reg_rw *) data_buf;
diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index e7adaab3522..4585c1bb9fa 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -149,7 +149,7 @@ int mwifiex_request_set_multicast_list(struct mwifiex_private *priv,
 int mwifiex_bss_start(struct mwifiex_private *priv,
 		      struct mwifiex_ssid_bssid *ssid_bssid)
 {
-	int ret = 0;
+	int ret;
 	struct mwifiex_adapter *adapter = priv->adapter;
 	s32 i = -1;
 
@@ -376,7 +376,7 @@ int mwifiex_get_bss_info(struct mwifiex_private *priv,
 {
 	struct mwifiex_adapter *adapter = priv->adapter;
 	struct mwifiex_bssdescriptor *bss_desc;
-	s32 tbl_idx = 0;
+	s32 tbl_idx;
 
 	if (!info)
 		return -1;
@@ -436,9 +436,8 @@ int mwifiex_set_radio_band_cfg(struct mwifiex_private *priv,
 			       struct mwifiex_ds_band_cfg *radio_cfg)
 {
 	struct mwifiex_adapter *adapter = priv->adapter;
-	u8 infra_band = 0;
-	u8 adhoc_band = 0;
-	u32 adhoc_channel = 0;
+	u8 infra_band, adhoc_band;
+	u32 adhoc_channel;
 
 	infra_band = (u8) radio_cfg->config_bands;
 	adhoc_band = (u8) radio_cfg->adhoc_start_band;
@@ -636,7 +635,7 @@ int mwifiex_bss_ioctl_find_bss(struct mwifiex_private *priv,
 int
 mwifiex_drv_change_adhoc_chan(struct mwifiex_private *priv, int channel)
 {
-	int ret = 0;
+	int ret;
 	struct mwifiex_bss_info bss_info;
 	struct mwifiex_ssid_bssid ssid_bssid;
 	u16 curr_chan = 0;
@@ -755,11 +754,10 @@ static int mwifiex_rate_ioctl_set_rate_value(struct mwifiex_private *priv,
 					     struct mwifiex_rate_cfg *rate_cfg)
 {
 	u8 rates[MWIFIEX_SUPPORTED_RATES];
-	u8 *rate = NULL;
-	int rate_index = 0;
+	u8 *rate;
+	int rate_index, ret;
 	u16 bitmap_rates[MAX_BITMAP_RATES_SIZE];
-	u32 i = 0;
-	int ret = 0;
+	u32 i;
 	struct mwifiex_adapter *adapter = priv->adapter;
 
 	if (rate_cfg->is_rate_auto) {
@@ -819,7 +817,7 @@ static int mwifiex_rate_ioctl_set_rate_value(struct mwifiex_private *priv,
 static int mwifiex_rate_ioctl_cfg(struct mwifiex_private *priv,
 				  struct mwifiex_rate_cfg *rate_cfg)
 {
-	int status = 0;
+	int status;
 
 	if (!rate_cfg)
 		return -1;
@@ -841,7 +839,7 @@ static int mwifiex_rate_ioctl_cfg(struct mwifiex_private *priv,
 int mwifiex_drv_get_data_rate(struct mwifiex_private *priv,
 			      struct mwifiex_rate_cfg *rate)
 {
-	int ret = 0;
+	int ret;
 
 	memset(rate, 0, sizeof(struct mwifiex_rate_cfg));
 	rate->action = HostCmd_ACT_GEN_GET;
@@ -875,11 +873,11 @@ int mwifiex_drv_get_data_rate(struct mwifiex_private *priv,
 int mwifiex_set_tx_power(struct mwifiex_private *priv,
 			 struct mwifiex_power_cfg *power_cfg)
 {
-	int ret = 0;
-	struct host_cmd_ds_txpwr_cfg *txp_cfg = NULL;
-	struct mwifiex_types_power_group *pg_tlv = NULL;
-	struct mwifiex_power_group *pg = NULL;
-	u8 *buf = NULL;
+	int ret;
+	struct host_cmd_ds_txpwr_cfg *txp_cfg;
+	struct mwifiex_types_power_group *pg_tlv;
+	struct mwifiex_power_group *pg;
+	u8 *buf;
 	u16 dbm = 0;
 
 	if (!power_cfg->is_power_auto) {
@@ -960,7 +958,7 @@ int mwifiex_set_tx_power(struct mwifiex_private *priv,
  */
 int mwifiex_drv_set_power(struct mwifiex_private *priv, u32 *ps_mode)
 {
-	int ret = 0;
+	int ret;
 	struct mwifiex_adapter *adapter = priv->adapter;
 	u16 sub_cmd;
 
@@ -1078,8 +1076,8 @@ static int mwifiex_sec_ioctl_set_wapi_key(struct mwifiex_private *priv,
 static int mwifiex_sec_ioctl_set_wep_key(struct mwifiex_private *priv,
 			      struct mwifiex_ds_encrypt_key *encrypt_key)
 {
-	int ret = 0;
-	struct mwifiex_wep_key *wep_key = NULL;
+	int ret;
+	struct mwifiex_wep_key *wep_key;
 	int index;
 
 	if (priv->wep_key_curr_index >= NUM_WEP_KEYS)
@@ -1142,7 +1140,7 @@ static int mwifiex_sec_ioctl_set_wep_key(struct mwifiex_private *priv,
 static int mwifiex_sec_ioctl_set_wpa_key(struct mwifiex_private *priv,
 			      struct mwifiex_ds_encrypt_key *encrypt_key)
 {
-	int ret = 0;
+	int ret;
 	u8 remove_key = false;
 	struct host_cmd_ds_802_11_key_material *ibss_key;
 
@@ -1209,7 +1207,7 @@ static int
 mwifiex_sec_ioctl_encrypt_key(struct mwifiex_private *priv,
 			      struct mwifiex_ds_encrypt_key *encrypt_key)
 {
-	int status = 0;
+	int status;
 
 	if (encrypt_key->is_wapi_key)
 		status = mwifiex_sec_ioctl_set_wapi_key(priv, encrypt_key);
@@ -1253,7 +1251,7 @@ int mwifiex_get_signal_info(struct mwifiex_private *priv,
 			    struct mwifiex_ds_get_signal *signal)
 {
 	struct mwifiex_ds_get_signal info;
-	int status = 0;
+	int status;
 
 	memset(&info, 0, sizeof(struct mwifiex_ds_get_signal));
 	info.selector = ALL_RSSI_INFO_MASK;
@@ -1334,7 +1332,7 @@ int
 mwifiex_get_stats_info(struct mwifiex_private *priv,
 		       struct mwifiex_ds_get_stats *log)
 {
-	int ret = 0;
+	int ret;
 	struct mwifiex_ds_get_stats get_log;
 
 	memset(&get_log, 0, sizeof(struct mwifiex_ds_get_stats));
@@ -1425,7 +1423,7 @@ int
 mwifiex_reg_read(struct mwifiex_private *priv, u32 reg_type,
 		 u32 reg_offset, u32 *value)
 {
-	int ret = 0;
+	int ret;
 	struct mwifiex_ds_reg_rw reg_rw;
 
 	reg_rw.type = cpu_to_le32(reg_type);
@@ -1451,7 +1449,7 @@ int
 mwifiex_eeprom_read(struct mwifiex_private *priv, u16 offset, u16 bytes,
 		    u8 *value)
 {
-	int ret = 0;
+	int ret;
 	struct mwifiex_ds_read_eeprom rd_eeprom;
 
 	rd_eeprom.offset = cpu_to_le16((u16) offset);
diff --git a/drivers/net/wireless/mwifiex/sta_rx.c b/drivers/net/wireless/mwifiex/sta_rx.c
index 8282679e64f..e047f0d8a98 100644
--- a/drivers/net/wireless/mwifiex/sta_rx.c
+++ b/drivers/net/wireless/mwifiex/sta_rx.c
@@ -41,7 +41,7 @@
 int mwifiex_process_rx_packet(struct mwifiex_adapter *adapter,
 			      struct sk_buff *skb)
 {
-	int ret = 0;
+	int ret;
 	struct mwifiex_rxinfo *rx_info = MWIFIEX_SKB_RXCB(skb);
 	struct mwifiex_private *priv = adapter->priv[rx_info->bss_index];
 	struct rx_packet_hdr *rx_pkt_hdr;
@@ -123,7 +123,7 @@ int mwifiex_process_sta_rx_packet(struct mwifiex_adapter *adapter,
 	struct mwifiex_rxinfo *rx_info = MWIFIEX_SKB_RXCB(skb);
 	struct rx_packet_hdr *rx_pkt_hdr;
 	u8 ta[ETH_ALEN];
-	u16 rx_pkt_type = 0;
+	u16 rx_pkt_type;
 	struct mwifiex_private *priv = adapter->priv[rx_info->bss_index];
 
 	local_rx_pd = (struct rxpd *) (skb->data);
diff --git a/drivers/net/wireless/mwifiex/sta_tx.c b/drivers/net/wireless/mwifiex/sta_tx.c
index 5d37ef16012..fa6221bc910 100644
--- a/drivers/net/wireless/mwifiex/sta_tx.c
+++ b/drivers/net/wireless/mwifiex/sta_tx.c
@@ -113,8 +113,8 @@ int mwifiex_send_null_packet(struct mwifiex_private *priv, u8 flags)
 /* sizeof(struct txpd) + Interface specific header */
 #define NULL_PACKET_HDR 64
 	u32 data_len = NULL_PACKET_HDR;
-	struct sk_buff *skb = NULL;
-	int ret = 0;
+	struct sk_buff *skb;
+	int ret;
 	struct mwifiex_txinfo *tx_info = NULL;
 
 	if (adapter->surprise_removed)
diff --git a/drivers/net/wireless/mwifiex/txrx.c b/drivers/net/wireless/mwifiex/txrx.c
index ce772e078db..210120889df 100644
--- a/drivers/net/wireless/mwifiex/txrx.c
+++ b/drivers/net/wireless/mwifiex/txrx.c
@@ -68,7 +68,7 @@ int mwifiex_process_tx(struct mwifiex_private *priv, struct sk_buff *skb,
 {
 	int ret = -1;
 	struct mwifiex_adapter *adapter = priv->adapter;
-	u8 *head_ptr = NULL;
+	u8 *head_ptr;
 	struct txpd *local_tx_pd = NULL;
 
 	head_ptr = (u8 *) mwifiex_process_sta_txpd(priv, skb);
@@ -121,8 +121,8 @@ int mwifiex_process_tx(struct mwifiex_private *priv, struct sk_buff *skb,
 int mwifiex_write_data_complete(struct mwifiex_adapter *adapter,
 				struct sk_buff *skb, int status)
 {
-	struct mwifiex_private *priv = NULL, *tpriv = NULL;
-	struct mwifiex_txinfo *tx_info = NULL;
+	struct mwifiex_private *priv, *tpriv;
+	struct mwifiex_txinfo *tx_info;
 	int i;
 
 	if (!skb)
@@ -169,9 +169,9 @@ int mwifiex_recv_packet_complete(struct mwifiex_adapter *adapter,
 				 struct sk_buff *skb, int status)
 {
 	struct mwifiex_rxinfo *rx_info = MWIFIEX_SKB_RXCB(skb);
-	struct mwifiex_rxinfo *rx_info_parent = NULL;
+	struct mwifiex_rxinfo *rx_info_parent;
 	struct mwifiex_private *priv;
-	struct sk_buff *skb_parent = NULL;
+	struct sk_buff *skb_parent;
 	unsigned long flags;
 
 	priv = adapter->priv[rx_info->bss_index];
diff --git a/drivers/net/wireless/mwifiex/util.c b/drivers/net/wireless/mwifiex/util.c
index 7ab4fb279f8..a8d53aa7e38 100644
--- a/drivers/net/wireless/mwifiex/util.c
+++ b/drivers/net/wireless/mwifiex/util.c
@@ -152,8 +152,8 @@ int mwifiex_get_debug_info(struct mwifiex_private *priv,
  */
 int mwifiex_recv_packet(struct mwifiex_adapter *adapter, struct sk_buff *skb)
 {
-	struct mwifiex_rxinfo *rx_info = NULL;
-	struct mwifiex_private *priv = NULL;
+	struct mwifiex_rxinfo *rx_info;
+	struct mwifiex_private *priv;
 
 	if (!skb)
 		return -1;
@@ -184,8 +184,8 @@ int mwifiex_recv_packet(struct mwifiex_adapter *adapter, struct sk_buff *skb)
 int mwifiex_recv_complete(struct mwifiex_adapter *adapter,
 			  struct sk_buff *skb, int status)
 {
-	struct mwifiex_private *priv = NULL;
-	struct mwifiex_rxinfo *rx_info = NULL;
+	struct mwifiex_private *priv;
+	struct mwifiex_rxinfo *rx_info;
 
 	if (!skb)
 		return 0;
diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c
index c009370f309..faa09e32902 100644
--- a/drivers/net/wireless/mwifiex/wmm.c
+++ b/drivers/net/wireless/mwifiex/wmm.c
@@ -799,7 +799,7 @@ u8
 mwifiex_wmm_compute_drv_pkt_delay(struct mwifiex_private *priv,
 					const struct sk_buff *skb)
 {
-	u8 ret_val = 0;
+	u8 ret_val;
 	struct timeval out_tstamp, in_tstamp;
 	u32 queue_delay;
 
-- 
cgit v1.2.3


From 0e579d6a8f4aea346da818f13ee71401c125e639 Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni.malinen@atheros.com>
Date: Tue, 3 May 2011 22:45:16 -0700
Subject: nl80211: Fix set_key regression with some drivers

Commit dbd2fd656f2060abfd3a16257f8b51ec60f6d2ed added a mechanism for
user space to indicate whether a default key is being configured for
only unicast or only multicast frames instead of all frames. This
commit added a driver capability flag for indicating whether separate
default keys are supported and validation of the set_key command based
on that capability.

However, this single capability flag is not enough to cover possible
difference based on mode (AP/IBSS/STA) and the way this change was
introduced resulted in a regression with drivers that do not indicate
the new capability (i.e.., more or less any non-mac80211 driver using
cfg80211) when using a recent wpa_supplicant snapshot.

Fix the regression by removing the new check which is not strictly
speaking needed. The new separate default key functionality is needed
only for RSN IBSS which has a separate capability indication.

Cc: stable@kernel.org
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/wireless/nl80211.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 0efa7fd0115..ab77f943dc0 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1682,14 +1682,6 @@ static int nl80211_set_key(struct sk_buff *skb, struct genl_info *info)
 		if (err)
 			goto out;
 
-		if (!(rdev->wiphy.flags &
-				WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS)) {
-			if (!key.def_uni || !key.def_multi) {
-				err = -EOPNOTSUPP;
-				goto out;
-			}
-		}
-
 		err = rdev->ops->set_default_key(&rdev->wiphy, dev, key.idx,
 						 key.def_uni, key.def_multi);
 
-- 
cgit v1.2.3


From f0dc7999b54ae0464d7144b81d21e1d39a389d49 Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni.malinen@atheros.com>
Date: Tue, 3 May 2011 22:50:15 -0700
Subject: cfg80211: Remove unused wiphy flag

The only user of WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS was removed
and consequently, this flag can be removed, too. In addition, a single
capability flag was not enough to indicate this capability clearly since
the device behavior may be different based on which operating mode is
being used.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/net/cfg80211.h | 3 ---
 net/mac80211/main.c    | 3 +--
 2 files changed, 1 insertion(+), 5 deletions(-)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index d30eada7c6c..4932dfcb72b 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1455,8 +1455,6 @@ struct cfg80211_ops {
  *	control port protocol ethertype. The device also honours the
  *	control_port_no_encrypt flag.
  * @WIPHY_FLAG_IBSS_RSN: The device supports IBSS RSN.
- * @WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS: The device supports separate
- *	unicast and multicast TX keys.
  * @WIPHY_FLAG_MESH_AUTH: The device supports mesh authentication by routing
  *	auth frames to userspace. See @NL80211_MESH_SETUP_USERSPACE_AUTH.
  */
@@ -1470,7 +1468,6 @@ enum wiphy_flags {
 	WIPHY_FLAG_4ADDR_STATION		= BIT(6),
 	WIPHY_FLAG_CONTROL_PORT_PROTOCOL	= BIT(7),
 	WIPHY_FLAG_IBSS_RSN			= BIT(8),
-	WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS= BIT(9),
 	WIPHY_FLAG_MESH_AUTH			= BIT(10),
 };
 
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 61877662e8f..d8be1986a10 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -580,8 +580,7 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 
 	wiphy->flags |= WIPHY_FLAG_NETNS_OK |
 			WIPHY_FLAG_4ADDR_AP |
-			WIPHY_FLAG_4ADDR_STATION |
-			WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS;
+			WIPHY_FLAG_4ADDR_STATION;
 
 	if (!ops->set_key)
 		wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
-- 
cgit v1.2.3


From 9b571e24a9922f79ed2440b4482cb9f11a8f1889 Mon Sep 17 00:00:00 2001
From: Yogesh Ashok Powar <yogeshp@marvell.com>
Date: Wed, 4 May 2011 17:22:16 +0530
Subject: mwl8k: Fix broken WEP

The WEP key length was being set to 0 erroneously which broke WEP support.
Fix the same by setting the key length appropriately.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 9f5ecef297e..d06591a7e56 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -3997,7 +3997,7 @@ static int mwl8k_cmd_encryption_set_key(struct ieee80211_hw *hw,
 			mwl8k_vif->wep_key_conf[idx].enabled = 1;
 		}
 
-		keymlen = 0;
+		keymlen = key->keylen;
 		action = MWL8K_ENCR_SET_KEY;
 		break;
 	case WLAN_CIPHER_SUITE_TKIP:
-- 
cgit v1.2.3


From 8f7f3b2fcc4ccbba0be776049df41a2f96c986ac Mon Sep 17 00:00:00 2001
From: Nicolas Cavallari <Nicolas.Cavallari@lri.fr>
Date: Wed, 4 May 2011 15:26:52 +0200
Subject: carl9170: fix allmulticast mode

Currently, the driver only disable multicast filtering when the
FIF_ALLMULTI driver flag has been just set (ie,
if changed_flags& FIF_ALLMULTI and *new_flags& FIF_ALLMULTI) or else
it will reenable multicast filtering.

But next time, this condition will be false and multicast filtering
will be reenabled, even through FIF_ALLMULTI is still set.

This mean that allmulticast only works for less than two minutes in
ad-hoc mode.  This patch fixes that to disable multicast filtering
as long as FIF_ALLMULTI is set.

Signed-off-by: Nicolas Cavallari  <cavallar@lri.fr>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/carl9170/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c
index 1638468be5a..7d5c65ea94e 100644
--- a/drivers/net/wireless/ath/carl9170/main.c
+++ b/drivers/net/wireless/ath/carl9170/main.c
@@ -883,7 +883,7 @@ static void carl9170_op_configure_filter(struct ieee80211_hw *hw,
 	 * then checking the error flags, later.
 	 */
 
-	if (changed_flags & FIF_ALLMULTI && *new_flags & FIF_ALLMULTI)
+	if (*new_flags & FIF_ALLMULTI)
 		multicast = ~0ULL;
 
 	if (multicast != ar->cur_mc_hash)
-- 
cgit v1.2.3


From ff1b6e69ad4f31fb3c9c6da2665655f2e798dd70 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 4 May 2011 15:37:28 +0200
Subject: nl80211/cfg80211: WoWLAN support

This is based on (but now quite far from) the
original work from Luis and Eliad. Add support
for configuring WoWLAN triggers, and getting
the configuration out again. Changes from the
original patchset are too numerous to list,
but one important change needs highlighting:
the suspend() callback is passed NULL for the
trigger configuration if userspace has not
configured WoWLAN at all.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/nl80211.h |  99 ++++++++++++++++++++
 include/net/cfg80211.h  |  74 ++++++++++++++-
 net/mac80211/cfg.c      |   3 +-
 net/wireless/core.c     |   8 ++
 net/wireless/core.h     |  14 +++
 net/wireless/nl80211.c  | 243 ++++++++++++++++++++++++++++++++++++++++++++++++
 net/wireless/sysfs.c    |   2 +-
 7 files changed, 439 insertions(+), 4 deletions(-)

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index be8df57b789..a75dea9c416 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -420,6 +420,14 @@
  *      new station with the AUTHENTICATED flag unset and maybe change it later
  *      depending on the authentication result.
  *
+ * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings.
+ * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings.
+ *	Since wireless is more complex than wired ethernet, it supports
+ *	various triggers. These triggers can be configured through this
+ *	command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
+ *	more background information, see
+ *	http://wireless.kernel.org/en/users/Documentation/WoWLAN.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -534,6 +542,9 @@ enum nl80211_commands {
 
 	NL80211_CMD_NEW_PEER_CANDIDATE,
 
+	NL80211_CMD_GET_WOWLAN,
+	NL80211_CMD_SET_WOWLAN,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -903,6 +914,13 @@ enum nl80211_commands {
  *	allows auth frames in a mesh to be passed to userspace for processing via
  *	the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
  *
+ * @NL80211_ATTR_WOWLAN_SUPPORTED: indicates, as part of the wiphy capabilities,
+ *	the supported WoWLAN triggers
+ * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to
+ *	indicate which WoW triggers should be enabled. This is also
+ *	used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
+ *	triggers.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1092,6 +1110,9 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_SUPPORT_MESH_AUTH,
 
+	NL80211_ATTR_WOWLAN_TRIGGERS,
+	NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -2061,4 +2082,82 @@ enum nl80211_tx_power_setting {
 	NL80211_TX_POWER_FIXED,
 };
 
+/**
+ * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute
+ * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute
+ * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has
+ *	a zero bit are ignored
+ * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have
+ *	a bit for each byte in the pattern. The lowest-order bit corresponds
+ *	to the first byte of the pattern, but the bytes of the pattern are
+ *	in a little-endian-like format, i.e. the 9th byte of the pattern
+ *	corresponds to the lowest-order bit in the second byte of the mask.
+ *	For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where
+ *	xx indicates "don't care") would be represented by a pattern of
+ *	twelve zero bytes, and a mask of "0xed,0x07".
+ *	Note that the pattern matching is done as though frames were not
+ *	802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
+ *	first (including SNAP header unpacking) and then matched.
+ * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes
+ * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number
+ */
+enum nl80211_wowlan_packet_pattern_attr {
+	__NL80211_WOWLAN_PKTPAT_INVALID,
+	NL80211_WOWLAN_PKTPAT_MASK,
+	NL80211_WOWLAN_PKTPAT_PATTERN,
+
+	NUM_NL80211_WOWLAN_PKTPAT,
+	MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1,
+};
+
+/**
+ * struct nl80211_wowlan_pattern_support - pattern support information
+ * @max_patterns: maximum number of patterns supported
+ * @min_pattern_len: minimum length of each pattern
+ * @max_pattern_len: maximum length of each pattern
+ *
+ * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when
+ * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the
+ * capability information given by the kernel to userspace.
+ */
+struct nl80211_wowlan_pattern_support {
+	__u32 max_patterns;
+	__u32 min_pattern_len;
+	__u32 max_pattern_len;
+} __attribute__((packed));
+
+/**
+ * enum nl80211_wowlan_triggers - WoWLAN trigger definitions
+ * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes
+ * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
+ *	the chip into a special state -- works best with chips that have
+ *	support for low-power operation already (flag)
+ * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
+ *	is detected is implementation-specific (flag)
+ * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
+ *	by 16 repetitions of MAC addr, anywhere in payload) (flag)
+ * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns
+ *	which are passed in an array of nested attributes, each nested attribute
+ *	defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern.
+ *	Each pattern defines a wakeup packet. The matching is done on the MSDU,
+ *	i.e. as though the packet was an 802.3 packet, so the pattern matching
+ *	is done after the packet is converted to the MSDU.
+ *
+ *	In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
+ *	carrying a &struct nl80211_wowlan_pattern_support.
+ * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
+ * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
+ */
+enum nl80211_wowlan_triggers {
+	__NL80211_WOWLAN_TRIG_INVALID,
+	NL80211_WOWLAN_TRIG_ANY,
+	NL80211_WOWLAN_TRIG_DISCONNECT,
+	NL80211_WOWLAN_TRIG_MAGIC_PKT,
+	NL80211_WOWLAN_TRIG_PKT_PATTERN,
+
+	/* keep last */
+	NUM_NL80211_WOWLAN_TRIG,
+	MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1
+};
+
 #endif /* __LINUX_NL80211_H */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 4932dfcb72b..0920daf3680 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1087,6 +1087,38 @@ struct cfg80211_pmksa {
 	u8 *pmkid;
 };
 
+/**
+ * struct cfg80211_wowlan_trig_pkt_pattern - packet pattern
+ * @mask: bitmask where to match pattern and where to ignore bytes,
+ *	one bit per byte, in same format as nl80211
+ * @pattern: bytes to match where bitmask is 1
+ * @pattern_len: length of pattern (in bytes)
+ *
+ * Internal note: @mask and @pattern are allocated in one chunk of
+ * memory, free @mask only!
+ */
+struct cfg80211_wowlan_trig_pkt_pattern {
+	u8 *mask, *pattern;
+	int pattern_len;
+};
+
+/**
+ * struct cfg80211_wowlan - Wake on Wireless-LAN support info
+ *
+ * This structure defines the enabled WoWLAN triggers for the device.
+ * @any: wake up on any activity -- special trigger if device continues
+ *	operating as normal during suspend
+ * @disconnect: wake up if getting disconnected
+ * @magic_pkt: wake up on receiving magic packet
+ * @patterns: wake up on receiving packet matching a pattern
+ * @n_patterns: number of patterns
+ */
+struct cfg80211_wowlan {
+	bool any, disconnect, magic_pkt;
+	struct cfg80211_wowlan_trig_pkt_pattern *patterns;
+	int n_patterns;
+};
+
 /**
  * struct cfg80211_ops - backend description for wireless configuration
  *
@@ -1100,7 +1132,9 @@ struct cfg80211_pmksa {
  * wireless extensions but this is subject to reevaluation as soon as this
  * code is used more widely and we have a first user without wext.
  *
- * @suspend: wiphy device needs to be suspended
+ * @suspend: wiphy device needs to be suspended. The variable @wow will
+ *	be %NULL or contain the enabled Wake-on-Wireless triggers that are
+ *	configured for the device.
  * @resume: wiphy device needs to be resumed
  *
  * @add_virtual_intf: create a new virtual interface with the given name,
@@ -1244,7 +1278,7 @@ struct cfg80211_pmksa {
  * @get_ringparam: Get tx and rx ring current and maximum sizes.
  */
 struct cfg80211_ops {
-	int	(*suspend)(struct wiphy *wiphy);
+	int	(*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
 	int	(*resume)(struct wiphy *wiphy);
 
 	struct net_device * (*add_virtual_intf)(struct wiphy *wiphy,
@@ -1479,6 +1513,38 @@ struct ieee80211_txrx_stypes {
 	u16 tx, rx;
 };
 
+/**
+ * enum wiphy_wowlan_support_flags - WoWLAN support flags
+ * @WIPHY_WOWLAN_ANY: supports wakeup for the special "any"
+ *	trigger that keeps the device operating as-is and
+ *	wakes up the host on any activity, for example a
+ *	received packet that passed filtering; note that the
+ *	packet should be preserved in that case
+ * @WIPHY_WOWLAN_MAGIC_PKT: supports wakeup on magic packet
+ *	(see nl80211.h)
+ * @WIPHY_WOWLAN_DISCONNECT: supports wakeup on disconnect
+ */
+enum wiphy_wowlan_support_flags {
+	WIPHY_WOWLAN_ANY	= BIT(0),
+	WIPHY_WOWLAN_MAGIC_PKT	= BIT(1),
+	WIPHY_WOWLAN_DISCONNECT	= BIT(2),
+};
+
+/**
+ * struct wiphy_wowlan_support - WoWLAN support data
+ * @flags: see &enum wiphy_wowlan_support_flags
+ * @n_patterns: number of supported wakeup patterns
+ *	(see nl80211.h for the pattern definition)
+ * @pattern_max_len: maximum length of each pattern
+ * @pattern_min_len: minimum length of each pattern
+ */
+struct wiphy_wowlan_support {
+	u32 flags;
+	int n_patterns;
+	int pattern_max_len;
+	int pattern_min_len;
+};
+
 /**
  * struct wiphy - wireless hardware description
  * @reg_notifier: the driver's regulatory notification callback,
@@ -1546,6 +1612,8 @@ struct ieee80211_txrx_stypes {
  *
  * @max_remain_on_channel_duration: Maximum time a remain-on-channel operation
  *	may request, if implemented.
+ *
+ * @wowlan: WoWLAN support information
  */
 struct wiphy {
 	/* assign these fields before you register the wiphy */
@@ -1583,6 +1651,8 @@ struct wiphy {
 	char fw_version[ETHTOOL_BUSINFO_LEN];
 	u32 hw_version;
 
+	struct wiphy_wowlan_support wowlan;
+
 	u16 max_remain_on_channel_duration;
 
 	u8 max_num_pmkids;
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 12d52cec951..321d598eb8c 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1297,7 +1297,8 @@ static int ieee80211_set_channel(struct wiphy *wiphy,
 }
 
 #ifdef CONFIG_PM
-static int ieee80211_suspend(struct wiphy *wiphy)
+static int ieee80211_suspend(struct wiphy *wiphy,
+			     struct cfg80211_wowlan *wowlan)
 {
 	return __ieee80211_suspend(wiphy_priv(wiphy));
 }
diff --git a/net/wireless/core.c b/net/wireless/core.c
index bbf1fa11107..bea0d80710c 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -493,6 +493,13 @@ int wiphy_register(struct wiphy *wiphy)
 		return -EINVAL;
 	}
 
+	if (rdev->wiphy.wowlan.n_patterns) {
+		if (WARN_ON(!rdev->wiphy.wowlan.pattern_min_len ||
+			    rdev->wiphy.wowlan.pattern_min_len >
+			    rdev->wiphy.wowlan.pattern_max_len))
+			return -EINVAL;
+	}
+
 	/* check and set up bitrates */
 	ieee80211_set_bitrate_flags(wiphy);
 
@@ -631,6 +638,7 @@ void cfg80211_dev_free(struct cfg80211_registered_device *rdev)
 	mutex_destroy(&rdev->devlist_mtx);
 	list_for_each_entry_safe(scan, tmp, &rdev->bss_list, list)
 		cfg80211_put_bss(&scan->pub);
+	cfg80211_rdev_free_wowlan(rdev);
 	kfree(rdev);
 }
 
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 26a0a084e16..7a18c10a7fb 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -70,6 +70,8 @@ struct cfg80211_registered_device {
 	struct work_struct conn_work;
 	struct work_struct event_work;
 
+	struct cfg80211_wowlan *wowlan;
+
 	/* must be last because of the way we do wiphy_priv(),
 	 * and it should at least be aligned to NETDEV_ALIGN */
 	struct wiphy wiphy __attribute__((__aligned__(NETDEV_ALIGN)));
@@ -89,6 +91,18 @@ bool wiphy_idx_valid(int wiphy_idx)
 	return wiphy_idx >= 0;
 }
 
+static inline void
+cfg80211_rdev_free_wowlan(struct cfg80211_registered_device *rdev)
+{
+	int i;
+
+	if (!rdev->wowlan)
+		return;
+	for (i = 0; i < rdev->wowlan->n_patterns; i++)
+		kfree(rdev->wowlan->patterns[i].mask);
+	kfree(rdev->wowlan->patterns);
+	kfree(rdev->wowlan);
+}
 
 extern struct workqueue_struct *cfg80211_wq;
 extern struct mutex cfg80211_mutex;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index ab77f943dc0..0a199a1ca9b 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -173,6 +173,7 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
 	[NL80211_ATTR_MCAST_RATE] = { .type = NLA_U32 },
 	[NL80211_ATTR_OFFCHANNEL_TX_OK] = { .type = NLA_FLAG },
 	[NL80211_ATTR_KEY_DEFAULT_TYPES] = { .type = NLA_NESTED },
+	[NL80211_ATTR_WOWLAN_TRIGGERS] = { .type = NLA_NESTED },
 };
 
 /* policy for the key attributes */
@@ -194,6 +195,15 @@ nl80211_key_default_policy[NUM_NL80211_KEY_DEFAULT_TYPES] = {
 	[NL80211_KEY_DEFAULT_TYPE_MULTICAST] = { .type = NLA_FLAG },
 };
 
+/* policy for WoWLAN attributes */
+static const struct nla_policy
+nl80211_wowlan_policy[NUM_NL80211_WOWLAN_TRIG] = {
+	[NL80211_WOWLAN_TRIG_ANY] = { .type = NLA_FLAG },
+	[NL80211_WOWLAN_TRIG_DISCONNECT] = { .type = NLA_FLAG },
+	[NL80211_WOWLAN_TRIG_MAGIC_PKT] = { .type = NLA_FLAG },
+	[NL80211_WOWLAN_TRIG_PKT_PATTERN] = { .type = NLA_NESTED },
+};
+
 /* ifidx get helper */
 static int nl80211_get_ifidx(struct netlink_callback *cb)
 {
@@ -821,6 +831,35 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 		nla_nest_end(msg, nl_ifs);
 	}
 
+	if (dev->wiphy.wowlan.flags || dev->wiphy.wowlan.n_patterns) {
+		struct nlattr *nl_wowlan;
+
+		nl_wowlan = nla_nest_start(msg,
+				NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED);
+		if (!nl_wowlan)
+			goto nla_put_failure;
+
+		if (dev->wiphy.wowlan.flags & WIPHY_WOWLAN_ANY)
+			NLA_PUT_FLAG(msg, NL80211_WOWLAN_TRIG_ANY);
+		if (dev->wiphy.wowlan.flags & WIPHY_WOWLAN_DISCONNECT)
+			NLA_PUT_FLAG(msg, NL80211_WOWLAN_TRIG_DISCONNECT);
+		if (dev->wiphy.wowlan.flags & WIPHY_WOWLAN_MAGIC_PKT)
+			NLA_PUT_FLAG(msg, NL80211_WOWLAN_TRIG_MAGIC_PKT);
+		if (dev->wiphy.wowlan.n_patterns) {
+			struct nl80211_wowlan_pattern_support pat = {
+				.max_patterns = dev->wiphy.wowlan.n_patterns,
+				.min_pattern_len =
+					dev->wiphy.wowlan.pattern_min_len,
+				.max_pattern_len =
+					dev->wiphy.wowlan.pattern_max_len,
+			};
+			NLA_PUT(msg, NL80211_WOWLAN_TRIG_PKT_PATTERN,
+				sizeof(pat), &pat);
+		}
+
+		nla_nest_end(msg, nl_wowlan);
+	}
+
 	return genlmsg_end(msg, hdr);
 
  nla_put_failure:
@@ -4808,6 +4847,194 @@ static int nl80211_leave_mesh(struct sk_buff *skb, struct genl_info *info)
 	return cfg80211_leave_mesh(rdev, dev);
 }
 
+static int nl80211_get_wowlan(struct sk_buff *skb, struct genl_info *info)
+{
+	struct cfg80211_registered_device *rdev = info->user_ptr[0];
+	struct sk_buff *msg;
+	void *hdr;
+
+	if (!rdev->wiphy.wowlan.flags && !rdev->wiphy.wowlan.n_patterns)
+		return -EOPNOTSUPP;
+
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	hdr = nl80211hdr_put(msg, info->snd_pid, info->snd_seq, 0,
+			     NL80211_CMD_GET_WOWLAN);
+	if (!hdr)
+		goto nla_put_failure;
+
+	if (rdev->wowlan) {
+		struct nlattr *nl_wowlan;
+
+		nl_wowlan = nla_nest_start(msg, NL80211_ATTR_WOWLAN_TRIGGERS);
+		if (!nl_wowlan)
+			goto nla_put_failure;
+
+		if (rdev->wowlan->any)
+			NLA_PUT_FLAG(msg, NL80211_WOWLAN_TRIG_ANY);
+		if (rdev->wowlan->disconnect)
+			NLA_PUT_FLAG(msg, NL80211_WOWLAN_TRIG_DISCONNECT);
+		if (rdev->wowlan->magic_pkt)
+			NLA_PUT_FLAG(msg, NL80211_WOWLAN_TRIG_MAGIC_PKT);
+		if (rdev->wowlan->n_patterns) {
+			struct nlattr *nl_pats, *nl_pat;
+			int i, pat_len;
+
+			nl_pats = nla_nest_start(msg,
+					NL80211_WOWLAN_TRIG_PKT_PATTERN);
+			if (!nl_pats)
+				goto nla_put_failure;
+
+			for (i = 0; i < rdev->wowlan->n_patterns; i++) {
+				nl_pat = nla_nest_start(msg, i + 1);
+				if (!nl_pat)
+					goto nla_put_failure;
+				pat_len = rdev->wowlan->patterns[i].pattern_len;
+				NLA_PUT(msg, NL80211_WOWLAN_PKTPAT_MASK,
+					DIV_ROUND_UP(pat_len, 8),
+					rdev->wowlan->patterns[i].mask);
+				NLA_PUT(msg, NL80211_WOWLAN_PKTPAT_PATTERN,
+					pat_len,
+					rdev->wowlan->patterns[i].pattern);
+				nla_nest_end(msg, nl_pat);
+			}
+			nla_nest_end(msg, nl_pats);
+		}
+
+		nla_nest_end(msg, nl_wowlan);
+	}
+
+	genlmsg_end(msg, hdr);
+	return genlmsg_reply(msg, info);
+
+nla_put_failure:
+	nlmsg_free(msg);
+	return -ENOBUFS;
+}
+
+static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info)
+{
+	struct cfg80211_registered_device *rdev = info->user_ptr[0];
+	struct nlattr *tb[NUM_NL80211_WOWLAN_TRIG];
+	struct cfg80211_wowlan no_triggers = {};
+	struct cfg80211_wowlan new_triggers = {};
+	struct wiphy_wowlan_support *wowlan = &rdev->wiphy.wowlan;
+	int err, i;
+
+	if (!rdev->wiphy.wowlan.flags && !rdev->wiphy.wowlan.n_patterns)
+		return -EOPNOTSUPP;
+
+	if (!info->attrs[NL80211_ATTR_WOWLAN_TRIGGERS])
+		goto no_triggers;
+
+	err = nla_parse(tb, MAX_NL80211_WOWLAN_TRIG,
+			nla_data(info->attrs[NL80211_ATTR_WOWLAN_TRIGGERS]),
+			nla_len(info->attrs[NL80211_ATTR_WOWLAN_TRIGGERS]),
+			nl80211_wowlan_policy);
+	if (err)
+		return err;
+
+	if (tb[NL80211_WOWLAN_TRIG_ANY]) {
+		if (!(wowlan->flags & WIPHY_WOWLAN_ANY))
+			return -EINVAL;
+		new_triggers.any = true;
+	}
+
+	if (tb[NL80211_WOWLAN_TRIG_DISCONNECT]) {
+		if (!(wowlan->flags & WIPHY_WOWLAN_DISCONNECT))
+			return -EINVAL;
+		new_triggers.disconnect = true;
+	}
+
+	if (tb[NL80211_WOWLAN_TRIG_MAGIC_PKT]) {
+		if (!(wowlan->flags & WIPHY_WOWLAN_MAGIC_PKT))
+			return -EINVAL;
+		new_triggers.magic_pkt = true;
+	}
+
+	if (tb[NL80211_WOWLAN_TRIG_PKT_PATTERN]) {
+		struct nlattr *pat;
+		int n_patterns = 0;
+		int rem, pat_len, mask_len;
+		struct nlattr *pat_tb[NUM_NL80211_WOWLAN_PKTPAT];
+
+		nla_for_each_nested(pat, tb[NL80211_WOWLAN_TRIG_PKT_PATTERN],
+				    rem)
+			n_patterns++;
+		if (n_patterns > wowlan->n_patterns)
+			return -EINVAL;
+
+		new_triggers.patterns = kcalloc(n_patterns,
+						sizeof(new_triggers.patterns[0]),
+						GFP_KERNEL);
+		if (!new_triggers.patterns)
+			return -ENOMEM;
+
+		new_triggers.n_patterns = n_patterns;
+		i = 0;
+
+		nla_for_each_nested(pat, tb[NL80211_WOWLAN_TRIG_PKT_PATTERN],
+				    rem) {
+			nla_parse(pat_tb, MAX_NL80211_WOWLAN_PKTPAT,
+				  nla_data(pat), nla_len(pat), NULL);
+			err = -EINVAL;
+			if (!pat_tb[NL80211_WOWLAN_PKTPAT_MASK] ||
+			    !pat_tb[NL80211_WOWLAN_PKTPAT_PATTERN])
+				goto error;
+			pat_len = nla_len(pat_tb[NL80211_WOWLAN_PKTPAT_PATTERN]);
+			mask_len = DIV_ROUND_UP(pat_len, 8);
+			if (nla_len(pat_tb[NL80211_WOWLAN_PKTPAT_MASK]) !=
+			    mask_len)
+				goto error;
+			if (pat_len > wowlan->pattern_max_len ||
+			    pat_len < wowlan->pattern_min_len)
+				goto error;
+
+			new_triggers.patterns[i].mask =
+				kmalloc(mask_len + pat_len, GFP_KERNEL);
+			if (!new_triggers.patterns[i].mask) {
+				err = -ENOMEM;
+				goto error;
+			}
+			new_triggers.patterns[i].pattern =
+				new_triggers.patterns[i].mask + mask_len;
+			memcpy(new_triggers.patterns[i].mask,
+			       nla_data(pat_tb[NL80211_WOWLAN_PKTPAT_MASK]),
+			       mask_len);
+			new_triggers.patterns[i].pattern_len = pat_len;
+			memcpy(new_triggers.patterns[i].pattern,
+			       nla_data(pat_tb[NL80211_WOWLAN_PKTPAT_PATTERN]),
+			       pat_len);
+			i++;
+		}
+	}
+
+	if (memcmp(&new_triggers, &no_triggers, sizeof(new_triggers))) {
+		struct cfg80211_wowlan *ntrig;
+		ntrig = kmemdup(&new_triggers, sizeof(new_triggers),
+				GFP_KERNEL);
+		if (!ntrig) {
+			err = -ENOMEM;
+			goto error;
+		}
+		cfg80211_rdev_free_wowlan(rdev);
+		rdev->wowlan = ntrig;
+	} else {
+ no_triggers:
+		cfg80211_rdev_free_wowlan(rdev);
+		rdev->wowlan = NULL;
+	}
+
+	return 0;
+ error:
+	for (i = 0; i < new_triggers.n_patterns; i++)
+		kfree(new_triggers.patterns[i].mask);
+	kfree(new_triggers.patterns);
+	return err;
+}
+
 #define NL80211_FLAG_NEED_WIPHY		0x01
 #define NL80211_FLAG_NEED_NETDEV	0x02
 #define NL80211_FLAG_NEED_RTNL		0x04
@@ -5306,6 +5533,22 @@ static struct genl_ops nl80211_ops[] = {
 		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
 				  NL80211_FLAG_NEED_RTNL,
 	},
+	{
+		.cmd = NL80211_CMD_GET_WOWLAN,
+		.doit = nl80211_get_wowlan,
+		.policy = nl80211_policy,
+		/* can be retrieved by unprivileged users */
+		.internal_flags = NL80211_FLAG_NEED_WIPHY |
+				  NL80211_FLAG_NEED_RTNL,
+	},
+	{
+		.cmd = NL80211_CMD_SET_WOWLAN,
+		.doit = nl80211_set_wowlan,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+		.internal_flags = NL80211_FLAG_NEED_WIPHY |
+				  NL80211_FLAG_NEED_RTNL,
+	},
 };
 
 static struct genl_multicast_group nl80211_mlme_mcgrp = {
diff --git a/net/wireless/sysfs.c b/net/wireless/sysfs.c
index 4294fa22bb2..c6e4ca6a7d2 100644
--- a/net/wireless/sysfs.c
+++ b/net/wireless/sysfs.c
@@ -93,7 +93,7 @@ static int wiphy_suspend(struct device *dev, pm_message_t state)
 
 	if (rdev->ops->suspend) {
 		rtnl_lock();
-		ret = rdev->ops->suspend(&rdev->wiphy);
+		ret = rdev->ops->suspend(&rdev->wiphy, rdev->wowlan);
 		rtnl_unlock();
 	}
 
-- 
cgit v1.2.3


From eecc48000afe2ca6da22122d553b7cad294e42fc Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 4 May 2011 15:37:29 +0200
Subject: mac80211: add basic support for WoWLAN

This adds basic support for the new WoWLAN
configuration in mac80211. The behaviour is
completely offloaded to the driver though,
with two new callbacks (suspend/resume).

Options for the driver include a complete
reconfiguration after wakeup, and exposing
all the triggers it wants to support.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/net/mac80211.h      | 16 ++++++++++++++++
 net/mac80211/cfg.c          |  2 +-
 net/mac80211/debugfs.c      |  2 +-
 net/mac80211/driver-ops.h   | 27 +++++++++++++++++++++++++++
 net/mac80211/driver-trace.h | 10 ++++++++++
 net/mac80211/ieee80211_i.h  |  9 +++++++--
 net/mac80211/main.c         |  4 ++++
 net/mac80211/pm.c           | 13 ++++++++++++-
 net/mac80211/util.c         | 19 +++++++++++++++++++
 9 files changed, 97 insertions(+), 5 deletions(-)

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 63f75a06043..9e5542794b9 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1606,6 +1606,18 @@ enum ieee80211_ampdu_mlme_action {
  *	you should ensure to cancel it on this callback.
  *	Must be implemented and can sleep.
  *
+ * @suspend: Suspend the device; mac80211 itself will quiesce before and
+ *	stop transmitting and doing any other configuration, and then
+ *	ask the device to suspend. This is only invoked when WoWLAN is
+ *	configured, otherwise the device is deconfigured completely and
+ *	reconfigured at resume time.
+ *
+ * @resume: If WoWLAN was configured, this indicates that mac80211 is
+ *	now resuming its operation, after this the device must be fully
+ *	functional again. If this returns an error, the only way out is
+ *	to also unregister the device. If it returns 1, then mac80211
+ *	will also go through the regular complete restart on resume.
+ *
  * @add_interface: Called when a netdevice attached to the hardware is
  *	enabled. Because it is not called for monitor mode devices, @start
  *	and @stop must be implemented.
@@ -1831,6 +1843,10 @@ struct ieee80211_ops {
 	void (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
 	int (*start)(struct ieee80211_hw *hw);
 	void (*stop)(struct ieee80211_hw *hw);
+#ifdef CONFIG_PM
+	int (*suspend)(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan);
+	int (*resume)(struct ieee80211_hw *hw);
+#endif
 	int (*add_interface)(struct ieee80211_hw *hw,
 			     struct ieee80211_vif *vif);
 	int (*change_interface)(struct ieee80211_hw *hw,
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 321d598eb8c..1ebc13383ae 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1300,7 +1300,7 @@ static int ieee80211_set_channel(struct wiphy *wiphy,
 static int ieee80211_suspend(struct wiphy *wiphy,
 			     struct cfg80211_wowlan *wowlan)
 {
-	return __ieee80211_suspend(wiphy_priv(wiphy));
+	return __ieee80211_suspend(wiphy_priv(wiphy), wowlan);
 }
 
 static int ieee80211_resume(struct wiphy *wiphy)
diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c
index 0a602dbfdb2..186e02f7cc3 100644
--- a/net/mac80211/debugfs.c
+++ b/net/mac80211/debugfs.c
@@ -135,7 +135,7 @@ static ssize_t reset_write(struct file *file, const char __user *user_buf,
 	struct ieee80211_local *local = file->private_data;
 
 	rtnl_lock();
-	__ieee80211_suspend(&local->hw);
+	__ieee80211_suspend(&local->hw, NULL);
 	__ieee80211_resume(&local->hw);
 	rtnl_unlock();
 
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index 2ddb56e5b51..aa16bd8ef78 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -41,6 +41,33 @@ static inline void drv_stop(struct ieee80211_local *local)
 	local->started = false;
 }
 
+#ifdef CONFIG_PM
+static inline int drv_suspend(struct ieee80211_local *local,
+			      struct cfg80211_wowlan *wowlan)
+{
+	int ret;
+
+	might_sleep();
+
+	trace_drv_suspend(local);
+	ret = local->ops->suspend(&local->hw, wowlan);
+	trace_drv_return_int(local, ret);
+	return ret;
+}
+
+static inline int drv_resume(struct ieee80211_local *local)
+{
+	int ret;
+
+	might_sleep();
+
+	trace_drv_resume(local);
+	ret = local->ops->resume(&local->hw);
+	trace_drv_return_int(local, ret);
+	return ret;
+}
+#endif
+
 static inline int drv_add_interface(struct ieee80211_local *local,
 				    struct ieee80211_vif *vif)
 {
diff --git a/net/mac80211/driver-trace.h b/net/mac80211/driver-trace.h
index 191e834ec46..11e1ea5111e 100644
--- a/net/mac80211/driver-trace.h
+++ b/net/mac80211/driver-trace.h
@@ -108,6 +108,16 @@ DEFINE_EVENT(local_only_evt, drv_start,
 	TP_ARGS(local)
 );
 
+DEFINE_EVENT(local_only_evt, drv_suspend,
+	TP_PROTO(struct ieee80211_local *local),
+	TP_ARGS(local)
+);
+
+DEFINE_EVENT(local_only_evt, drv_resume,
+	TP_PROTO(struct ieee80211_local *local),
+	TP_ARGS(local)
+);
+
 DEFINE_EVENT(local_only_evt, drv_stop,
 	TP_PROTO(struct ieee80211_local *local),
 	TP_ARGS(local)
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 9e3b4f0f31b..e89bc27f8dc 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -764,6 +764,9 @@ struct ieee80211_local {
 	/* device is started */
 	bool started;
 
+	/* wowlan is enabled -- don't reconfig on resume */
+	bool wowlan;
+
 	int tx_headroom; /* required headroom for hardware/radiotap */
 
 	/* count for keys needing tailroom space allocation */
@@ -1250,7 +1253,8 @@ int ieee80211_reconfig(struct ieee80211_local *local);
 void ieee80211_stop_device(struct ieee80211_local *local);
 
 #ifdef CONFIG_PM
-int __ieee80211_suspend(struct ieee80211_hw *hw);
+int __ieee80211_suspend(struct ieee80211_hw *hw,
+			struct cfg80211_wowlan *wowlan);
 
 static inline int __ieee80211_resume(struct ieee80211_hw *hw)
 {
@@ -1263,7 +1267,8 @@ static inline int __ieee80211_resume(struct ieee80211_hw *hw)
 	return ieee80211_reconfig(hw_to_local(hw));
 }
 #else
-static inline int __ieee80211_suspend(struct ieee80211_hw *hw)
+static inline int __ieee80211_suspend(struct ieee80211_hw *hw,
+				      struct cfg80211_wowlan *wowlan)
 {
 	return 0;
 }
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index d8be1986a10..cb326d36be9 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -696,6 +696,10 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 		WLAN_CIPHER_SUITE_AES_CMAC
 	};
 
+	if ((hw->wiphy->wowlan.flags || hw->wiphy->wowlan.n_patterns) &&
+	    (!local->ops->suspend || !local->ops->resume))
+		return -EINVAL;
+
 	if (hw->max_report_rates == 0)
 		hw->max_report_rates = hw->max_rates;
 
diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c
index 04246171088..730778a2c90 100644
--- a/net/mac80211/pm.c
+++ b/net/mac80211/pm.c
@@ -6,7 +6,7 @@
 #include "driver-ops.h"
 #include "led.h"
 
-int __ieee80211_suspend(struct ieee80211_hw *hw)
+int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan)
 {
 	struct ieee80211_local *local = hw_to_local(hw);
 	struct ieee80211_sub_if_data *sdata;
@@ -47,6 +47,16 @@ int __ieee80211_suspend(struct ieee80211_hw *hw)
 	cancel_work_sync(&local->dynamic_ps_enable_work);
 	del_timer_sync(&local->dynamic_ps_timer);
 
+	local->wowlan = wowlan && local->open_count;
+	if (local->wowlan) {
+		int err = drv_suspend(local, wowlan);
+		if (err) {
+			local->quiescing = false;
+			return err;
+		}
+		goto suspend;
+	}
+
 	/* disable keys */
 	list_for_each_entry(sdata, &local->interfaces, list)
 		ieee80211_disable_keys(sdata);
@@ -104,6 +114,7 @@ int __ieee80211_suspend(struct ieee80211_hw *hw)
 	if (local->open_count)
 		ieee80211_stop_device(local);
 
+ suspend:
 	local->suspended = true;
 	/* need suspended to be visible before quiescing is false */
 	barrier();
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index ef0560a2346..d3fe2d23748 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1125,9 +1125,27 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 	struct sta_info *sta;
 	int res;
 
+#ifdef CONFIG_PM
 	if (local->suspended)
 		local->resuming = true;
 
+	if (local->wowlan) {
+		local->wowlan = false;
+		res = drv_resume(local);
+		if (res < 0) {
+			local->resuming = false;
+			return res;
+		}
+		if (res == 0)
+			goto wake_up;
+		WARN_ON(res > 1);
+		/*
+		 * res is 1, which means the driver requested
+		 * to go through a regular reset on wakeup.
+		 */
+	}
+#endif
+
 	/* restart hardware */
 	if (local->open_count) {
 		/*
@@ -1258,6 +1276,7 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 		if (ieee80211_sdata_running(sdata))
 			ieee80211_enable_keys(sdata);
 
+ wake_up:
 	ieee80211_wake_queues_by_reason(hw,
 			IEEE80211_QUEUE_STOP_REASON_SUSPEND);
 
-- 
cgit v1.2.3


From 28ef6450f0182f95c4f50aaa0ab2043a09c72b0a Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanoharan@atheros.com>
Date: Wed, 4 May 2011 19:37:17 +0530
Subject: ath9k_hw: do noise floor calibration only on required chains

At present the noise floor calibration is processed in supported
control and extension chains rather than required chains.
Unnccesarily doing nfcal in all supported chains leads to
invalid nf readings on extn chains and these invalid values
got updated into history buffer. While loading those values
from history buffer is moving the chip to deaf state.

This issue was observed in AR9002/AR9003 chips while doing
associate/dissociate in HT40 mode and interface up/down
in iterative manner. After some iterations, the chip was moved
to deaf state. Somehow the pci devices are recovered by poll work
after chip reset. Raading the nf values in all supported extension chains
when the hw is not yet configured in HT40 mode results invalid values.

Cc: stable@kernel.org
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/calib.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index 8649581fa4d..fe3c10e6b27 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -69,15 +69,21 @@ static void ath9k_hw_update_nfcal_hist_buffer(struct ath_hw *ah,
 					      int16_t *nfarray)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
+	struct ieee80211_conf *conf = &common->hw->conf;
 	struct ath_nf_limits *limit;
 	struct ath9k_nfcal_hist *h;
 	bool high_nf_mid = false;
+	u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask;
 	int i;
 
 	h = cal->nfCalHist;
 	limit = ath9k_hw_get_nf_limits(ah, ah->curchan);
 
 	for (i = 0; i < NUM_NF_READINGS; i++) {
+		if (!(chainmask & (1 << i)) ||
+		    ((i >= AR5416_MAX_CHAINS) && !conf_is_ht40(conf)))
+			continue;
+
 		h[i].nfCalBuffer[h[i].currIndex] = nfarray[i];
 
 		if (++h[i].currIndex >= ATH9K_NF_CAL_HIST_MAX)
@@ -225,6 +231,7 @@ void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
 	int32_t val;
 	u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask;
 	struct ath_common *common = ath9k_hw_common(ah);
+	struct ieee80211_conf *conf = &common->hw->conf;
 	s16 default_nf = ath9k_hw_get_default_nf(ah, chan);
 
 	if (ah->caldata)
@@ -234,6 +241,9 @@ void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
 		if (chainmask & (1 << i)) {
 			s16 nfval;
 
+			if ((i >= AR5416_MAX_CHAINS) && !conf_is_ht40(conf))
+				continue;
+
 			if (h)
 				nfval = h[i].privNF;
 			else
@@ -293,6 +303,9 @@ void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
 	ENABLE_REGWRITE_BUFFER(ah);
 	for (i = 0; i < NUM_NF_READINGS; i++) {
 		if (chainmask & (1 << i)) {
+			if ((i >= AR5416_MAX_CHAINS) && !conf_is_ht40(conf))
+				continue;
+
 			val = REG_READ(ah, ah->nf_regs[i]);
 			val &= 0xFFFFFE00;
 			val |= (((u32) (-50) << 1) & 0x1ff);
-- 
cgit v1.2.3


From aca355b9784fbc960c9caa6b30f953a965296420 Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Wed, 4 May 2011 21:41:36 +0200
Subject: rt2x00: Initial support for RT5370 USB devices.

Add necessary RF chipset define and basic support for these devices.

Tested-by: Juan Carlos Garza <juancarlosgarza@gmail.com>
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/Kconfig     | 11 ++++++++++-
 drivers/net/wireless/rt2x00/rt2800.h    |  2 ++
 drivers/net/wireless/rt2x00/rt2800lib.c |  5 ++++-
 drivers/net/wireless/rt2x00/rt2800usb.c |  8 ++++++++
 4 files changed, 24 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index c4577310828..9def1e5369a 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -93,7 +93,7 @@ config RT2800PCI_RT35XX
 	  intended for testers and developers.
 
 config RT2800PCI_RT53XX
-       bool "rt2800-pci - Include support for rt53xx devices (EXPERIMENTAL)"
+       bool "rt2800pci - Include support for rt53xx devices (EXPERIMENTAL)"
        depends on EXPERIMENTAL
        default y
        ---help---
@@ -163,6 +163,15 @@ config RT2800USB_RT35XX
 	  Support for these devices is non-functional at the moment and is
 	  intended for testers and developers.
 
+config RT2800USB_RT53XX
+       bool "rt2800usb - Include support for rt53xx devices (EXPERIMENTAL)"
+       depends on EXPERIMENTAL
+       default y
+       ---help---
+         This adds support for rt53xx wireless chipset family to the
+         rt2800pci driver.
+         Supported chips: RT5370
+
 config RT2800USB_UNKNOWN
 	bool "rt2800usb - Include support for unknown (USB) devices"
 	default n
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 3b3d851fe26..47a04d2dad4 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -51,6 +51,7 @@
  * RF3320 2.4G 1T1R(RT3350/RT3370/RT3390)
  * RF3322 2.4G 2T2R(RT3352/RT3371/RT3372/RT3391/RT3392)
  * RF3853 2.4G/5G 3T3R(RT3883/RT3563/RT3573/RT3593/RT3662)
+ * RF5370 2.4G 1T1R
  * RF5390 2.4G 1T1R
  */
 #define RF2820				0x0001
@@ -66,6 +67,7 @@
 #define RF3320				0x000b
 #define RF3322				0x000c
 #define RF3853				0x000d
+#define RF5370				0x5370
 #define RF5390				0x5390
 
 /*
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 6ed646a02d4..93fb67491ac 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1751,7 +1751,8 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
 	    rt2x00_rf(rt2x00dev, RF3052) ||
 	    rt2x00_rf(rt2x00dev, RF3320))
 		rt2800_config_channel_rf3xxx(rt2x00dev, conf, rf, info);
-	else if (rt2x00_rf(rt2x00dev, RF5390))
+	else if (rt2x00_rf(rt2x00dev, RF5370) ||
+		 rt2x00_rf(rt2x00dev, RF5390))
 		rt2800_config_channel_rf53xx(rt2x00dev, conf, rf, info);
 	else
 		rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info);
@@ -3686,6 +3687,7 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	    !rt2x00_rf(rt2x00dev, RF3022) &&
 	    !rt2x00_rf(rt2x00dev, RF3052) &&
 	    !rt2x00_rf(rt2x00dev, RF3320) &&
+	    !rt2x00_rf(rt2x00dev, RF5370) &&
 	    !rt2x00_rf(rt2x00dev, RF5390)) {
 		ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
 		return -ENODEV;
@@ -3988,6 +3990,7 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 		   rt2x00_rf(rt2x00dev, RF3021) ||
 		   rt2x00_rf(rt2x00dev, RF3022) ||
 		   rt2x00_rf(rt2x00dev, RF3320) ||
+		   rt2x00_rf(rt2x00dev, RF5370) ||
 		   rt2x00_rf(rt2x00dev, RF5390)) {
 		spec->num_channels = 14;
 		spec->channels = rf_vals_3x;
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 0eb44cf2f44..ba82c972703 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -1000,6 +1000,14 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	/* Zinwell */
 	{ USB_DEVICE(0x5a57, 0x0284) },
 #endif
+#ifdef CONFIG_RT2800USB_RT53XX
+	/* Azurewave */
+	{ USB_DEVICE(0x13d3, 0x3329) },
+	{ USB_DEVICE(0x13d3, 0x3365) },
+	/* Ralink */
+	{ USB_DEVICE(0x148f, 0x5370) },
+	{ USB_DEVICE(0x148f, 0x5372) },
+#endif
 #ifdef CONFIG_RT2800USB_UNKNOWN
 	/*
 	 * Unclear what kind of devices these are (they aren't supported by the
-- 
cgit v1.2.3


From 4268d8ed64ed918384954924284ba396cdb0e388 Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <IvDoorn@gmail.com>
Date: Wed, 4 May 2011 21:42:05 +0200
Subject: rt2x00: Fix transfer speed regression for USB hardware

Patch:
  rt2x00: Make rt2x00_queue_entry_for_each more flexible
  commit: 10e11568ca8b8a15f7478f6a4ceebabcbdba1018

introduced a severe regression on the throughput
for USB hardware. It turns out that the exiting of
the rt2x00queue_for_each_entry() was done too early.

The exact cause for this regression is unknown,
but by disabling the premature exiting of the loop
seems to resolve the issue.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Reported-by: Yasushi SHOJI <yashi@atmark-techno.com>
Reported-by: Balint Viragh <bviragh@dension.com>
Tested-by: Balint Viragh <bviragh@dension.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00usb.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index e027ebd4458..dc6b662ad5f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -298,7 +298,7 @@ static bool rt2x00usb_kick_tx_entry(struct queue_entry *entry, void* data)
 
 	if (!test_and_clear_bit(ENTRY_DATA_PENDING, &entry->flags) ||
 	    test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
-		return true;
+		return false;
 
 	/*
 	 * USB devices cannot blindly pass the skb->len as the
@@ -392,7 +392,7 @@ static bool rt2x00usb_kick_rx_entry(struct queue_entry *entry, void* data)
 
 	if (test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
 	    test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
-		return true;
+		return false;
 
 	rt2x00lib_dmastart(entry);
 
@@ -447,7 +447,7 @@ static bool rt2x00usb_flush_entry(struct queue_entry *entry, void* data)
 	struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data;
 
 	if (!test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
-		return true;
+		return false;
 
 	usb_kill_urb(entry_priv->urb);
 
-- 
cgit v1.2.3


From cf3a03b9c99a0b2715741d116f50f513f545bb2d Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Date: Wed, 4 May 2011 14:01:26 -0700
Subject: ath9k_hw: fix power for the HT40 duplicate frames

With AR9003 at about ~ 10 feet from an AP that uses RTS / CTS you
will be able to associate but not not get data through given that
the power for the rates used was set too low. This increases the
power and permits data connectivity at longer distances from
access points when connected with HT40. Without this you will not
get any data through when associated to APs configured in HT40
at about more than 10 feet away.

Cc: stable@kernel.org
Cc: Fiona Cain <fcain@atheros.com>
Cc: Zhen Xie <Zhen.Xie@Atheros.com>
Cc: Kathy Giori <kathy.giori@atheros.com>
Cc: Neha Choksi <neha.choksi@atheros.com>
Cc: Wayne Daniel <wayne.daniel@atheros.com>
Cc: Gaurav Jauhar <gaurav.jauhar@atheros.com>
Cc: Samira Naraghi <samira.naraghi@atheros.com>
CC: Ashok Chennupati <ashok.chennupati@atheros.com>
Cc: Lance Zimmerman <lance.zimmerman@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 97f970c5e4e..a9dd3a4b4af 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -4005,6 +4005,16 @@ static int ar9003_hw_tx_power_regwrite(struct ath_hw *ah, u8 * pPwrArray)
 		  POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 0)
 	    );
 
+        /* Write the power for duplicated frames - HT40 */
+
+        /* dup40_cck (LSB), dup40_ofdm, ext20_cck, ext20_ofdm (MSB) */
+	REG_WRITE(ah, 0xa3e0,
+		  POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 24) |
+		  POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 16) |
+		  POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24],  8) |
+		  POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L],  0)
+	    );
+
 	/* Write the HT20 power per rate set */
 
 	/* 0/8/16 (LSB), 1-3/9-11/17-19, 4, 5 (MSB) */
-- 
cgit v1.2.3


From fc2b1e0cfe9b4cabde8afeacc2bb81a95bf83afb Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Thu, 5 May 2011 12:45:52 +0200
Subject: b43: drop invalid IMCFGLO workaround
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

We were performing it on wrong core, it was outdated and is already
implemented in ssb.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c | 28 +---------------------------
 1 file changed, 1 insertion(+), 27 deletions(-)

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 57eb5b64973..675e288a3c5 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4212,33 +4212,7 @@ static void b43_bluetooth_coext_disable(struct b43_wldev *dev)
 
 static void b43_imcfglo_timeouts_workaround(struct b43_wldev *dev)
 {
-#ifdef CONFIG_SSB_DRIVER_PCICORE
-	struct ssb_bus *bus = dev->dev->bus;
-	u32 tmp;
-
-	if (bus->pcicore.dev &&
-	    bus->pcicore.dev->id.coreid == SSB_DEV_PCI &&
-	    bus->pcicore.dev->id.revision <= 5) {
-		/* IMCFGLO timeouts workaround. */
-		tmp = ssb_read32(dev->dev, SSB_IMCFGLO);
-		switch (bus->bustype) {
-		case SSB_BUSTYPE_PCI:
-		case SSB_BUSTYPE_PCMCIA:
-			tmp &= ~SSB_IMCFGLO_REQTO;
-			tmp &= ~SSB_IMCFGLO_SERTO;
-			tmp |= 0x32;
-			break;
-		case SSB_BUSTYPE_SSB:
-			tmp &= ~SSB_IMCFGLO_REQTO;
-			tmp &= ~SSB_IMCFGLO_SERTO;
-			tmp |= 0x53;
-			break;
-		default:
-			break;
-		}
-		ssb_write32(dev->dev, SSB_IMCFGLO, tmp);
-	}
-#endif /* CONFIG_SSB_DRIVER_PCICORE */
+	/* TODO: implement 80211 core workaround here */
 }
 
 static void b43_set_synth_pu_delay(struct b43_wldev *dev, bool idle)
-- 
cgit v1.2.3


From eee40820e95e6dbd7b0709e7b8cca453004ae7b1 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Thu, 5 May 2011 12:46:04 +0200
Subject: b43legacy: drop invalid IMCFGLO workaround
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

We were performing it on wrong core, it was outdated and is already
implemented in ssb.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43legacy/main.c | 32 --------------------------------
 1 file changed, 32 deletions(-)

diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index c7fd73e3ad7..2162663293c 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -3104,37 +3104,6 @@ static void setup_struct_wldev_for_init(struct b43legacy_wldev *dev)
 	memset(&dev->noisecalc, 0, sizeof(dev->noisecalc));
 }
 
-static void b43legacy_imcfglo_timeouts_workaround(struct b43legacy_wldev *dev)
-{
-#ifdef CONFIG_SSB_DRIVER_PCICORE
-	struct ssb_bus *bus = dev->dev->bus;
-	u32 tmp;
-
-	if (bus->pcicore.dev &&
-	    bus->pcicore.dev->id.coreid == SSB_DEV_PCI &&
-	    bus->pcicore.dev->id.revision <= 5) {
-		/* IMCFGLO timeouts workaround. */
-		tmp = ssb_read32(dev->dev, SSB_IMCFGLO);
-		switch (bus->bustype) {
-		case SSB_BUSTYPE_PCI:
-		case SSB_BUSTYPE_PCMCIA:
-			tmp &= ~SSB_IMCFGLO_REQTO;
-			tmp &= ~SSB_IMCFGLO_SERTO;
-			tmp |= 0x32;
-			break;
-		case SSB_BUSTYPE_SSB:
-			tmp &= ~SSB_IMCFGLO_REQTO;
-			tmp &= ~SSB_IMCFGLO_SERTO;
-			tmp |= 0x53;
-			break;
-		default:
-			break;
-		}
-		ssb_write32(dev->dev, SSB_IMCFGLO, tmp);
-	}
-#endif /* CONFIG_SSB_DRIVER_PCICORE */
-}
-
 static void b43legacy_set_synth_pu_delay(struct b43legacy_wldev *dev,
 					  bool idle) {
 	u16 pu_delay = 1050;
@@ -3278,7 +3247,6 @@ static int b43legacy_wireless_core_init(struct b43legacy_wldev *dev)
 	/* Enable IRQ routing to this device. */
 	ssb_pcicore_dev_irqvecs_enable(&bus->pcicore, dev->dev);
 
-	b43legacy_imcfglo_timeouts_workaround(dev);
 	prepare_phy_data_for_init(dev);
 	b43legacy_phy_calibrate(dev);
 	err = b43legacy_chip_init(dev);
-- 
cgit v1.2.3


From e4eefec73ea0a740bfe8736e3ac30dfe92fe392b Mon Sep 17 00:00:00 2001
From: Yogesh Ashok Powar <yogeshp@marvell.com>
Date: Thu, 5 May 2011 16:30:48 +0530
Subject: mwl8k: Do not ask mac80211 to generate IV for crypto keys

Since firmware is capable of generating IV's for all crypto
suits (TKIP, CCMP and WEP), do not ask mac80211 to generate
IV when HW crypto is being used. Instead only reserve
appropriate space in tx skb's in the driver, so that the
firmware can write IV's values.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index d06591a7e56..32261189bce 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -784,7 +784,8 @@ static inline void mwl8k_remove_dma_header(struct sk_buff *skb, __le16 qos)
 #define REDUCED_TX_HEADROOM	8
 
 static void
-mwl8k_add_dma_header(struct mwl8k_priv *priv, struct sk_buff *skb, int tail_pad)
+mwl8k_add_dma_header(struct mwl8k_priv *priv, struct sk_buff *skb,
+						int head_pad, int tail_pad)
 {
 	struct ieee80211_hdr *wh;
 	int hdrlen;
@@ -816,7 +817,7 @@ mwl8k_add_dma_header(struct mwl8k_priv *priv, struct sk_buff *skb, int tail_pad)
 		skb->truesize += REDUCED_TX_HEADROOM;
 	}
 
-	reqd_hdrlen = sizeof(*tr);
+	reqd_hdrlen = sizeof(*tr) + head_pad;
 
 	if (hdrlen != reqd_hdrlen)
 		skb_push(skb, reqd_hdrlen - hdrlen);
@@ -845,6 +846,7 @@ static void mwl8k_encapsulate_tx_frame(struct mwl8k_priv *priv,
 	struct ieee80211_tx_info *tx_info;
 	struct ieee80211_key_conf *key_conf;
 	int data_pad;
+	int head_pad = 0;
 
 	wh = (struct ieee80211_hdr *)skb->data;
 
@@ -856,9 +858,7 @@ static void mwl8k_encapsulate_tx_frame(struct mwl8k_priv *priv,
 
 	/*
 	 * Make sure the packet header is in the DMA header format (4-address
-	 * without QoS), the necessary crypto padding between the header and the
-	 * payload has already been provided by mac80211, but it doesn't add
-	 * tail padding when HW crypto is enabled.
+	 * without QoS), and add head & tail padding when HW crypto is enabled.
 	 *
 	 * We have the following trailer padding requirements:
 	 * - WEP: 4 trailer bytes (ICV)
@@ -867,6 +867,7 @@ static void mwl8k_encapsulate_tx_frame(struct mwl8k_priv *priv,
 	 */
 	data_pad = 0;
 	if (key_conf != NULL) {
+		head_pad = key_conf->iv_len;
 		switch (key_conf->cipher) {
 		case WLAN_CIPHER_SUITE_WEP40:
 		case WLAN_CIPHER_SUITE_WEP104:
@@ -880,7 +881,7 @@ static void mwl8k_encapsulate_tx_frame(struct mwl8k_priv *priv,
 			break;
 		}
 	}
-	mwl8k_add_dma_header(priv, skb, data_pad);
+	mwl8k_add_dma_header(priv, skb, head_pad, data_pad);
 }
 
 /*
@@ -1837,7 +1838,7 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, int index, struct sk_buff *skb)
 	if (priv->ap_fw)
 		mwl8k_encapsulate_tx_frame(priv, skb);
 	else
-		mwl8k_add_dma_header(priv, skb, 0);
+		mwl8k_add_dma_header(priv, skb, 0, 0);
 
 	wh = &((struct mwl8k_dma_data *)skb->data)->wh;
 
@@ -4071,7 +4072,6 @@ static int mwl8k_set_key(struct ieee80211_hw *hw,
 		addr = sta->addr;
 
 	if (cmd_param == SET_KEY) {
-		key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
 		rc = mwl8k_cmd_encryption_set_key(hw, vif, addr, key);
 		if (rc)
 			goto out;
-- 
cgit v1.2.3


From 4613e72dbdc9a44bfc4625d835511264121c4244 Mon Sep 17 00:00:00 2001
From: "Cindy H. Kao" <cindy.h.kao@intel.com>
Date: Fri, 6 May 2011 10:40:15 -0700
Subject: iwlwifi: support the svtool messages interactions through nl80211
 test mode

This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.

The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.

The detail specific functions are:

1. The function iwl_testmode_cmd() is added to digest the svtool test command
   from the user space application. The svtool test commands are categorized  to
   three types : commands to be processed by the device ucode, commands to access
   the registers, and commands to be processed at the driver level(such as reload
   the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
   and reply to user space regarding the command execution status. Extra data is
   returned to the user space application if there's any.

2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
   messages from the iwlwifi device to the user space. Regardless the message types,
   whenever there is a valid spontaneous message received by the iwlwifi ISR,
   iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
   space. The message content is not attacked and the message parsing is left to
   the user space application.

Implementation guidelines:

1. The generic netlink messaging for iwliwif test mode is through  NL80211_CMD_TESTMODE
   channel, therefore, the codes need to follow the regulations set by cfg80211.ko
   to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
   device is indicated with ieee80211_ops and can be actually accessed.

   Therefore, a callback iwl_testmode_cmd() is added to the structure
   iwlagn_hw_ops in iwl-agn.c.

2. It intends to utilize those low level device access APIs from iwlwifi device driver
   (ie. iwlagn.ko) rather than creating it's own set of device access functions.
   For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.

3. The main functions are maintained in new files instead of spreading all over the
   existing iwlwifi driver files.

   The new files added are :

   drivers/net/wireless/iwlwifi/iwl-sv-open.c
        - to handle the user space test mode application command
          and reply the respective command status to the user space application.
        - to multicast the spontaneous messages from device to user space.

   drivers/net/wireless/iwlwifi/iwl-testmode.h
        - the commonly referenced definitions for the TLVs used in
          the generic netlink messages

Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
---
 drivers/net/wireless/iwlwifi/Kconfig         |  10 +
 drivers/net/wireless/iwlwifi/Makefile        |   1 +
 drivers/net/wireless/iwlwifi/iwl-agn-ucode.c |   2 +-
 drivers/net/wireless/iwlwifi/iwl-agn.c       |   6 +-
 drivers/net/wireless/iwlwifi/iwl-agn.h       |  17 +
 drivers/net/wireless/iwlwifi/iwl-dev.h       |   2 +
 drivers/net/wireless/iwlwifi/iwl-sv-open.c   | 469 +++++++++++++++++++++++++++
 drivers/net/wireless/iwlwifi/iwl-testmode.h  | 151 +++++++++
 8 files changed, 656 insertions(+), 2 deletions(-)
 create mode 100644 drivers/net/wireless/iwlwifi/iwl-sv-open.c
 create mode 100644 drivers/net/wireless/iwlwifi/iwl-testmode.h

diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index 17d555f2215..ad3bdba6bee 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -102,6 +102,16 @@ config IWLWIFI_DEVICE_TRACING
 	  occur.
 endmenu
 
+config IWLWIFI_DEVICE_SVTOOL
+	bool "iwlwifi device svtool support"
+	depends on IWLAGN
+	select NL80211_TESTMODE
+	help
+	  This option enables the svtool support for iwlwifi device through
+	  NL80211_TESTMODE. svtool is a software validation tool that runs in
+	  the user space and interacts with the device in the kernel space
+	  through the generic netlink message via NL80211_TESTMODE channel.
+
 config IWL_P2P
 	bool "iwlwifi experimental P2P support"
 	depends on IWLAGN
diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile
index 89a41d320c3..822660483f9 100644
--- a/drivers/net/wireless/iwlwifi/Makefile
+++ b/drivers/net/wireless/iwlwifi/Makefile
@@ -16,6 +16,7 @@ iwlagn-objs             += iwl-2000.o
 
 iwlagn-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o
 iwlagn-$(CONFIG_IWLWIFI_DEVICE_TRACING) += iwl-devtrace.o
+iwlagn-$(CONFIG_IWLWIFI_DEVICE_SVTOOL) += iwl-sv-open.o
 
 CFLAGS_iwl-devtrace.o := -I$(src)
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c b/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
index c3ae2e44fcc..8bda0e8d666 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
@@ -269,7 +269,7 @@ void iwlagn_rx_calib_result(struct iwl_priv *priv,
 	iwl_calib_set(&priv->calib_results[index], pkt->u.raw, len);
 }
 
-static int iwlagn_init_alive_start(struct iwl_priv *priv)
+int iwlagn_init_alive_start(struct iwl_priv *priv)
 {
 	int ret;
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 003d5243542..09fe841f028 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -776,6 +776,8 @@ static void iwl_rx_handle(struct iwl_priv *priv)
 
 			wake_up_all(&priv->_agn.notif_waitq);
 		}
+		if (priv->pre_rx_handler)
+			priv->pre_rx_handler(priv, rxb);
 
 		/* Based on type of command response or notification,
 		 *   handle those that need handling via function in
@@ -2211,7 +2213,7 @@ static int iwlagn_send_calib_cfg_rt(struct iwl_priv *priv, u32 cfg)
  *                   from protocol/runtime uCode (initialization uCode's
  *                   Alive gets handled by iwl_init_alive_start()).
  */
-static int iwl_alive_start(struct iwl_priv *priv)
+int iwl_alive_start(struct iwl_priv *priv)
 {
 	int ret = 0;
 	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
@@ -3507,6 +3509,7 @@ struct ieee80211_ops iwlagn_hw_ops = {
 	.cancel_remain_on_channel = iwl_mac_cancel_remain_on_channel,
 	.offchannel_tx = iwl_mac_offchannel_tx,
 	.offchannel_tx_cancel_wait = iwl_mac_offchannel_tx_cancel_wait,
+	CFG80211_TESTMODE_CMD(iwl_testmode_cmd)
 };
 
 static u32 iwl_hw_detect(struct iwl_priv *priv)
@@ -3816,6 +3819,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	iwl_setup_deferred_work(priv);
 	iwl_setup_rx_handlers(priv);
+	iwl_testmode_init(priv);
 
 	/*********************************************
 	 * 8. Enable interrupts and read RFKILL state
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.h b/drivers/net/wireless/iwlwifi/iwl-agn.h
index b477336ff53..aa398b6dab1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.h
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.h
@@ -344,5 +344,22 @@ iwlagn_wait_notification(struct iwl_priv *priv,
 void __releases(wait_entry)
 iwlagn_remove_notification(struct iwl_priv *priv,
 			   struct iwl_notification_wait *wait_entry);
+extern int iwlagn_init_alive_start(struct iwl_priv *priv);
+extern int iwl_alive_start(struct iwl_priv *priv);
+/* svtool */
+#ifdef CONFIG_IWLWIFI_DEVICE_SVTOOL
+extern int iwl_testmode_cmd(struct ieee80211_hw *hw, void *data, int len);
+extern void iwl_testmode_init(struct iwl_priv *priv);
+#else
+static inline
+int iwl_testmode_cmd(struct ieee80211_hw *hw, void *data, int len)
+{
+	return -ENOSYS;
+}
+static inline
+void iwl_testmode_init(struct iwl_priv *priv)
+{
+}
+#endif
 
 #endif /* __iwl_agn_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index f098eff263f..3d28ad25807 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1194,6 +1194,8 @@ struct iwl_priv {
 
 	enum ieee80211_band band;
 
+	void (*pre_rx_handler)(struct iwl_priv *priv,
+			       struct iwl_rx_mem_buffer *rxb);
 	void (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv,
 				       struct iwl_rx_mem_buffer *rxb);
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-sv-open.c b/drivers/net/wireless/iwlwifi/iwl-sv-open.c
new file mode 100644
index 00000000000..89b6696622c
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-sv-open.c
@@ -0,0 +1,469 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2010 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <net/net_namespace.h>
+#include <linux/netdevice.h>
+#include <net/cfg80211.h>
+#include <net/mac80211.h>
+#include <net/netlink.h>
+
+
+#include "iwl-dev.h"
+#include "iwl-core.h"
+#include "iwl-debug.h"
+#include "iwl-fh.h"
+#include "iwl-io.h"
+#include "iwl-agn.h"
+#include "iwl-testmode.h"
+
+
+/* The TLVs used in the gnl message policy between the kernel module and
+ * user space application. iwl_testmode_gnl_msg_policy is to be carried
+ * through the NL80211_CMD_TESTMODE channel regulated by nl80211.
+ * See iwl-testmode.h
+ */
+static
+struct nla_policy iwl_testmode_gnl_msg_policy[IWL_TM_ATTR_MAX] = {
+	[IWL_TM_ATTR_COMMAND] = { .type = NLA_U32, },
+
+	[IWL_TM_ATTR_UCODE_CMD_ID] = { .type = NLA_U8, },
+	[IWL_TM_ATTR_UCODE_CMD_DATA] = { .type = NLA_UNSPEC, },
+
+	[IWL_TM_ATTR_REG_OFFSET] = { .type = NLA_U32, },
+	[IWL_TM_ATTR_REG_VALUE8] = { .type = NLA_U8, },
+	[IWL_TM_ATTR_REG_VALUE32] = { .type = NLA_U32, },
+
+	[IWL_TM_ATTR_SYNC_RSP] = { .type = NLA_UNSPEC, },
+	[IWL_TM_ATTR_UCODE_RX_PKT] = { .type = NLA_UNSPEC, },
+};
+
+/*
+ * See the struct iwl_rx_packet in iwl-commands.h for the format of the
+ * received events from the device
+ */
+static inline int get_event_length(struct iwl_rx_mem_buffer *rxb)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	if (pkt)
+		return le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
+	else
+		return 0;
+}
+
+
+/*
+ * This function multicasts the spontaneous messages from the device to the
+ * user space. It is invoked whenever there is a received messages
+ * from the device. This function is called within the ISR of the rx handlers
+ * in iwlagn driver.
+ *
+ * The parsing of the message content is left to the user space application,
+ * The message content is treated as unattacked raw data and is encapsulated
+ * with IWL_TM_ATTR_UCODE_RX_PKT multicasting to the user space.
+ *
+ * @priv: the instance of iwlwifi device
+ * @rxb: pointer to rx data content received by the ISR
+ *
+ * See the message policies and TLVs in iwl_testmode_gnl_msg_policy[].
+ * For the messages multicasting to the user application, the mandatory
+ * TLV fields are :
+ *	IWL_TM_ATTR_COMMAND must be IWL_TM_CMD_DEV2APP_UCODE_RX_PKT
+ *	IWL_TM_ATTR_UCODE_RX_PKT for carrying the message content
+ */
+
+static void iwl_testmode_ucode_rx_pkt(struct iwl_priv *priv,
+				struct iwl_rx_mem_buffer *rxb)
+{
+	struct ieee80211_hw *hw = priv->hw;
+	struct sk_buff *skb;
+	void *data;
+	int length;
+
+	data = (void *)rxb_addr(rxb);
+	length = get_event_length(rxb);
+
+	if (!data || length == 0)
+		return;
+
+	skb = cfg80211_testmode_alloc_event_skb(hw->wiphy, 20 + length,
+								GFP_ATOMIC);
+	if (skb == NULL) {
+		IWL_DEBUG_INFO(priv,
+			 "Run out of memory for messages to user space ?\n");
+		return;
+	}
+	NLA_PUT_U32(skb, IWL_TM_ATTR_COMMAND, IWL_TM_CMD_DEV2APP_UCODE_RX_PKT);
+	NLA_PUT(skb, IWL_TM_ATTR_UCODE_RX_PKT, length, data);
+	cfg80211_testmode_event(skb, GFP_ATOMIC);
+	return;
+
+nla_put_failure:
+	kfree_skb(skb);
+	IWL_DEBUG_INFO(priv, "Ouch, overran buffer, check allocation!\n");
+}
+
+void iwl_testmode_init(struct iwl_priv *priv)
+{
+	priv->pre_rx_handler = iwl_testmode_ucode_rx_pkt;
+}
+
+/*
+ * This function handles the user application commands to the ucode.
+ *
+ * It retrieves the mandatory fields IWL_TM_ATTR_UCODE_CMD_ID and
+ * IWL_TM_ATTR_UCODE_CMD_DATA and calls to the handler to send the
+ * host command to the ucode.
+ *
+ * If any mandatory field is missing, -ENOMSG is replied to the user space
+ * application; otherwise, the actual execution result of the host command to
+ * ucode is replied.
+ *
+ * @hw: ieee80211_hw object that represents the device
+ * @tb: gnl message fields from the user space
+ */
+static int iwl_testmode_ucode(struct ieee80211_hw *hw, struct nlattr **tb)
+{
+	struct iwl_priv *priv = hw->priv;
+	struct iwl_host_cmd cmd;
+
+	memset(&cmd, 0, sizeof(struct iwl_host_cmd));
+
+	if (!tb[IWL_TM_ATTR_UCODE_CMD_ID] ||
+	    !tb[IWL_TM_ATTR_UCODE_CMD_DATA]) {
+		IWL_DEBUG_INFO(priv,
+			"Error finding ucode command mandatory fields\n");
+		return -ENOMSG;
+	}
+
+	cmd.id = nla_get_u8(tb[IWL_TM_ATTR_UCODE_CMD_ID]);
+	cmd.data = nla_data(tb[IWL_TM_ATTR_UCODE_CMD_DATA]);
+	cmd.len = nla_len(tb[IWL_TM_ATTR_UCODE_CMD_DATA]);
+	IWL_INFO(priv, "testmode ucode command ID 0x%x, flags 0x%x,"
+				" len %d\n", cmd.id, cmd.flags, cmd.len);
+	/* ok, let's submit the command to ucode */
+	return iwl_send_cmd(priv, &cmd);
+}
+
+
+/*
+ * This function handles the user application commands for register access.
+ *
+ * It retrieves command ID carried with IWL_TM_ATTR_COMMAND and calls to the
+ * handlers respectively.
+ *
+ * If it's an unknown commdn ID, -ENOSYS is returned; or -ENOMSG if the
+ * mandatory fields(IWL_TM_ATTR_REG_OFFSET,IWL_TM_ATTR_REG_VALUE32,
+ * IWL_TM_ATTR_REG_VALUE8) are missing; Otherwise 0 is replied indicating
+ * the success of the command execution.
+ *
+ * If IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_REG_READ32, the register read
+ * value is returned with IWL_TM_ATTR_REG_VALUE32.
+ *
+ * @hw: ieee80211_hw object that represents the device
+ * @tb: gnl message fields from the user space
+ */
+static int iwl_testmode_reg(struct ieee80211_hw *hw, struct nlattr **tb)
+{
+	struct iwl_priv *priv = hw->priv;
+	u32 ofs, val32;
+	u8 val8;
+	struct sk_buff *skb;
+	int status = 0;
+
+	if (!tb[IWL_TM_ATTR_REG_OFFSET]) {
+		IWL_DEBUG_INFO(priv, "Error finding register offset\n");
+		return -ENOMSG;
+	}
+	ofs = nla_get_u32(tb[IWL_TM_ATTR_REG_OFFSET]);
+	IWL_INFO(priv, "testmode register access command offset 0x%x\n", ofs);
+
+	switch (nla_get_u32(tb[IWL_TM_ATTR_COMMAND])) {
+	case IWL_TM_CMD_APP2DEV_REG_READ32:
+		val32 = iwl_read32(priv, ofs);
+		IWL_INFO(priv, "32bit value to read 0x%x\n", val32);
+
+		skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy, 20);
+		if (!skb) {
+			IWL_DEBUG_INFO(priv, "Error allocating memory\n");
+			return -ENOMEM;
+		}
+		NLA_PUT_U32(skb, IWL_TM_ATTR_REG_VALUE32, val32);
+		status = cfg80211_testmode_reply(skb);
+		if (status < 0)
+			IWL_DEBUG_INFO(priv,
+				       "Error sending msg : %d\n", status);
+		break;
+	case IWL_TM_CMD_APP2DEV_REG_WRITE32:
+		if (!tb[IWL_TM_ATTR_REG_VALUE32]) {
+			IWL_DEBUG_INFO(priv,
+				       "Error finding value to write\n");
+			return -ENOMSG;
+		} else {
+			val32 = nla_get_u32(tb[IWL_TM_ATTR_REG_VALUE32]);
+			IWL_INFO(priv, "32bit value to write 0x%x\n", val32);
+			iwl_write32(priv, ofs, val32);
+		}
+		break;
+	case IWL_TM_CMD_APP2DEV_REG_WRITE8:
+		if (!tb[IWL_TM_ATTR_REG_VALUE8]) {
+			IWL_DEBUG_INFO(priv, "Error finding value to write\n");
+			return -ENOMSG;
+		} else {
+			val8 = nla_get_u8(tb[IWL_TM_ATTR_REG_VALUE8]);
+			IWL_INFO(priv, "8bit value to write 0x%x\n", val8);
+			iwl_write8(priv, ofs, val8);
+		}
+		break;
+	default:
+		IWL_DEBUG_INFO(priv, "Unknown testmode register command ID\n");
+		return -ENOSYS;
+	}
+
+	return status;
+
+nla_put_failure:
+	kfree_skb(skb);
+	return -EMSGSIZE;
+}
+
+
+static int iwl_testmode_cfg_init_calib(struct iwl_priv *priv)
+{
+	struct iwl_notification_wait calib_wait;
+	int ret;
+
+	iwlagn_init_notification_wait(priv, &calib_wait,
+				      CALIBRATION_COMPLETE_NOTIFICATION,
+				      NULL, NULL);
+	ret = iwlagn_init_alive_start(priv);
+	if (ret) {
+		IWL_DEBUG_INFO(priv,
+			"Error configuring init calibration: %d\n", ret);
+		goto cfg_init_calib_error;
+	}
+
+	ret = iwlagn_wait_notification(priv, &calib_wait, 2 * HZ);
+	if (ret)
+		IWL_DEBUG_INFO(priv, "Error detecting"
+			" CALIBRATION_COMPLETE_NOTIFICATION: %d\n", ret);
+	return ret;
+
+cfg_init_calib_error:
+	iwlagn_remove_notification(priv, &calib_wait);
+	return ret;
+}
+
+/*
+ * This function handles the user application commands for driver.
+ *
+ * It retrieves command ID carried with IWL_TM_ATTR_COMMAND and calls to the
+ * handlers respectively.
+ *
+ * If it's an unknown commdn ID, -ENOSYS is replied; otherwise, the returned
+ * value of the actual command execution is replied to the user application.
+ *
+ * If there's any message responding to the user space, IWL_TM_ATTR_SYNC_RSP
+ * is used for carry the message while IWL_TM_ATTR_COMMAND must set to
+ * IWL_TM_CMD_DEV2APP_SYNC_RSP.
+ *
+ * @hw: ieee80211_hw object that represents the device
+ * @tb: gnl message fields from the user space
+ */
+static int iwl_testmode_driver(struct ieee80211_hw *hw, struct nlattr **tb)
+{
+	struct iwl_priv *priv = hw->priv;
+	struct sk_buff *skb;
+	unsigned char *rsp_data_ptr = NULL;
+	int status = 0, rsp_data_len = 0;
+
+	switch (nla_get_u32(tb[IWL_TM_ATTR_COMMAND])) {
+	case IWL_TM_CMD_APP2DEV_GET_DEVICENAME:
+		rsp_data_ptr = (unsigned char *)priv->cfg->name;
+		rsp_data_len = strlen(priv->cfg->name);
+		skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy,
+							rsp_data_len + 20);
+		if (!skb) {
+			IWL_DEBUG_INFO(priv,
+				       "Error allocating memory\n");
+			return -ENOMEM;
+		}
+		NLA_PUT_U32(skb, IWL_TM_ATTR_COMMAND,
+			    IWL_TM_CMD_DEV2APP_SYNC_RSP);
+		NLA_PUT(skb, IWL_TM_ATTR_SYNC_RSP,
+			rsp_data_len, rsp_data_ptr);
+		status = cfg80211_testmode_reply(skb);
+		if (status < 0)
+			IWL_DEBUG_INFO(priv, "Error sending msg : %d\n",
+				       status);
+		break;
+
+	case IWL_TM_CMD_APP2DEV_LOAD_INIT_FW:
+		status = iwlagn_load_ucode_wait_alive(priv, &priv->ucode_init,
+					   UCODE_SUBTYPE_INIT, -1);
+		if (status)
+			IWL_DEBUG_INFO(priv,
+				"Error loading init ucode: %d\n", status);
+		break;
+
+	case IWL_TM_CMD_APP2DEV_CFG_INIT_CALIB:
+		iwl_testmode_cfg_init_calib(priv);
+		iwlagn_stop_device(priv);
+		break;
+
+	case IWL_TM_CMD_APP2DEV_LOAD_RUNTIME_FW:
+		status = iwlagn_load_ucode_wait_alive(priv,
+					   &priv->ucode_rt,
+					   UCODE_SUBTYPE_REGULAR,
+					   UCODE_SUBTYPE_REGULAR_NEW);
+		if (status) {
+			IWL_DEBUG_INFO(priv,
+				"Error loading runtime ucode: %d\n", status);
+			break;
+		}
+		status = iwl_alive_start(priv);
+		if (status)
+			IWL_DEBUG_INFO(priv,
+				"Error starting the device: %d\n", status);
+		break;
+
+	default:
+		IWL_DEBUG_INFO(priv, "Unknown testmode driver command ID\n");
+		return -ENOSYS;
+	}
+	return status;
+
+nla_put_failure:
+	kfree_skb(skb);
+	return -EMSGSIZE;
+}
+
+/* The testmode gnl message handler that takes the gnl message from the
+ * user space and parses it per the policy iwl_testmode_gnl_msg_policy, then
+ * invoke the corresponding handlers.
+ *
+ * This function is invoked when there is user space application sending
+ * gnl message through the testmode tunnel NL80211_CMD_TESTMODE regulated
+ * by nl80211.
+ *
+ * It retrieves the mandatory field, IWL_TM_ATTR_COMMAND, before
+ * dispatching it to the corresponding handler.
+ *
+ * If IWL_TM_ATTR_COMMAND is missing, -ENOMSG is replied to user application;
+ * -ENOSYS is replied to the user application if the command is unknown;
+ * Otherwise, the command is dispatched to the respective handler.
+ *
+ * @hw: ieee80211_hw object that represents the device
+ * @data: pointer to user space message
+ * @len: length in byte of @data
+ */
+int iwl_testmode_cmd(struct ieee80211_hw *hw, void *data, int len)
+{
+	struct nlattr *tb[IWL_TM_ATTR_MAX - 1];
+	struct iwl_priv *priv = hw->priv;
+	int result;
+
+	result = nla_parse(tb, IWL_TM_ATTR_MAX - 1, data, len,
+			iwl_testmode_gnl_msg_policy);
+	if (result != 0) {
+		IWL_DEBUG_INFO(priv,
+			       "Error parsing the gnl message : %d\n", result);
+		return result;
+	}
+
+	/* IWL_TM_ATTR_COMMAND is absolutely mandatory */
+	if (!tb[IWL_TM_ATTR_COMMAND]) {
+		IWL_DEBUG_INFO(priv, "Error finding testmode command type\n");
+		return -ENOMSG;
+	}
+	/* in case multiple accesses to the device happens */
+	mutex_lock(&priv->mutex);
+
+	switch (nla_get_u32(tb[IWL_TM_ATTR_COMMAND])) {
+	case IWL_TM_CMD_APP2DEV_UCODE:
+		IWL_DEBUG_INFO(priv, "testmode cmd to uCode\n");
+		result = iwl_testmode_ucode(hw, tb);
+		break;
+	case IWL_TM_CMD_APP2DEV_REG_READ32:
+	case IWL_TM_CMD_APP2DEV_REG_WRITE32:
+	case IWL_TM_CMD_APP2DEV_REG_WRITE8:
+		IWL_DEBUG_INFO(priv, "testmode cmd to register\n");
+		result = iwl_testmode_reg(hw, tb);
+		break;
+	case IWL_TM_CMD_APP2DEV_GET_DEVICENAME:
+	case IWL_TM_CMD_APP2DEV_LOAD_INIT_FW:
+	case IWL_TM_CMD_APP2DEV_CFG_INIT_CALIB:
+	case IWL_TM_CMD_APP2DEV_LOAD_RUNTIME_FW:
+		IWL_DEBUG_INFO(priv, "testmode cmd to driver\n");
+		result = iwl_testmode_driver(hw, tb);
+		break;
+	default:
+		IWL_DEBUG_INFO(priv, "Unknown testmode command\n");
+		result = -ENOSYS;
+		break;
+	}
+
+	mutex_unlock(&priv->mutex);
+	return result;
+}
diff --git a/drivers/net/wireless/iwlwifi/iwl-testmode.h b/drivers/net/wireless/iwlwifi/iwl-testmode.h
new file mode 100644
index 00000000000..31f8949f280
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-testmode.h
@@ -0,0 +1,151 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2010 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+#ifndef __IWL_TESTMODE_H__
+#define __IWL_TESTMODE_H__
+
+#include <linux/types.h>
+
+
+/* Commands from user space to kernel space(IWL_TM_CMD_ID_APP2DEV_XX) and
+ * from and kernel space to user space(IWL_TM_CMD_ID_DEV2APP_XX).
+ * The command ID is carried with IWL_TM_ATTR_COMMAND. There are three types of
+ * of command from user space and two types of command from kernel space.
+ * See below.
+ */
+enum iwl_tm_cmd_t {
+	/* commands from user application to the uCode,
+	 * the actual uCode host command ID is carried with
+	 * IWL_TM_ATTR_UCODE_CMD_ID */
+	IWL_TM_CMD_APP2DEV_UCODE = 1,
+
+	/* commands from user applicaiton to access register */
+	IWL_TM_CMD_APP2DEV_REG_READ32,
+	IWL_TM_CMD_APP2DEV_REG_WRITE32,
+	IWL_TM_CMD_APP2DEV_REG_WRITE8,
+
+	/* commands fom user space for pure driver level operations */
+	IWL_TM_CMD_APP2DEV_GET_DEVICENAME,
+	IWL_TM_CMD_APP2DEV_LOAD_INIT_FW,
+	IWL_TM_CMD_APP2DEV_CFG_INIT_CALIB,
+	IWL_TM_CMD_APP2DEV_LOAD_RUNTIME_FW,
+	/* if there is other new command for the driver layer operation,
+	 * append them here */
+
+
+	/* commands from kernel space to carry the synchronous response
+	 * to user application */
+	IWL_TM_CMD_DEV2APP_SYNC_RSP,
+
+	/* commands from kernel space to multicast the spontaneous messages
+	 * to user application */
+	IWL_TM_CMD_DEV2APP_UCODE_RX_PKT,
+	IWL_TM_CMD_MAX,
+};
+
+enum iwl_tm_attr_t {
+	IWL_TM_ATTR_NOT_APPLICABLE = 0,
+
+	/* From user space to kernel space:
+	 * the command either destines to ucode, driver, or register;
+	 * See enum iwl_tm_cmd_t.
+	 *
+	 * From kernel space to user space:
+	 * the command either carries synchronous response,
+	 * or the spontaneous message multicast from the device;
+	 * See enum iwl_tm_cmd_t. */
+	IWL_TM_ATTR_COMMAND,
+
+	/* When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_UCODE,
+	 * The mandatory fields are :
+	 * IWL_TM_ATTR_UCODE_CMD_ID for recognizable command ID;
+	 * IWL_TM_ATTR_COMMAND_FLAG for the flags of the commands;
+	 * The optional fields are:
+	 * IWL_TM_ATTR_UCODE_CMD_DATA for the actual command payload
+	 * to the ucode */
+	IWL_TM_ATTR_UCODE_CMD_ID,
+	IWL_TM_ATTR_UCODE_CMD_DATA,
+
+	/* When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_REG_XXX,
+	 * The mandatory fields are:
+	 * IWL_TM_ATTR_REG_OFFSET for the offset of the target register;
+	 * IWL_TM_ATTR_REG_VALUE8 or IWL_TM_ATTR_REG_VALUE32 for value */
+	IWL_TM_ATTR_REG_OFFSET,
+	IWL_TM_ATTR_REG_VALUE8,
+	IWL_TM_ATTR_REG_VALUE32,
+
+	/* When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_DEV2APP_SYNC_RSP,
+	 * The mandatory fields are:
+	 * IWL_TM_ATTR_SYNC_RSP for the data content responding to the user
+	 * application command */
+	IWL_TM_ATTR_SYNC_RSP,
+	/* When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_DEV2APP_UCODE_RX_PKT,
+	 * The mandatory fields are:
+	 * IWL_TM_ATTR_UCODE_RX_PKT for the data content multicast to the user
+	 * application */
+	IWL_TM_ATTR_UCODE_RX_PKT,
+
+	IWL_TM_ATTR_MAX,
+};
+
+
+#endif
-- 
cgit v1.2.3


From 46975f78fe1f480682e51c9acb03a5089b784cb6 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Thu, 28 Apr 2011 07:27:05 -0700
Subject: iwlagn: remove get_hcmd_size indirection

There's no need for this, all commands are the right size.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c | 7 -------
 drivers/net/wireless/iwlwifi/iwl-core.h     | 1 -
 drivers/net/wireless/iwlwifi/iwl-tx.c       | 1 -
 3 files changed, 9 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
index 49dd03f9fed..b12c72d63cc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
@@ -54,12 +54,6 @@ int iwlagn_send_tx_ant_config(struct iwl_priv *priv, u8 valid_tx_ant)
 	}
 }
 
-/* Currently this is the superset of everything */
-static u16 iwlagn_get_hcmd_size(u8 cmd_id, u16 len)
-{
-	return len;
-}
-
 static u16 iwlagn_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data)
 {
 	u16 size = (u16)sizeof(struct iwl_addsta_cmd);
@@ -332,7 +326,6 @@ struct iwl_hcmd_ops iwlagn_bt_hcmd = {
 };
 
 struct iwl_hcmd_utils_ops iwlagn_hcmd_utils = {
-	.get_hcmd_size = iwlagn_get_hcmd_size,
 	.build_addsta_hcmd = iwlagn_build_addsta_hcmd,
 	.gain_computation = iwlagn_gain_computation,
 	.chain_noise_reset = iwlagn_chain_noise_reset,
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index dec9820753f..9d7e36d0fb2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -99,7 +99,6 @@ struct iwl_hcmd_ops {
 };
 
 struct iwl_hcmd_utils_ops {
-	u16 (*get_hcmd_size)(u8 cmd_id, u16 len);
 	u16 (*build_addsta_hcmd)(const struct iwl_addsta_cmd *cmd, u8 *data);
 	void (*gain_computation)(struct iwl_priv *priv,
 			u32 *average_noise,
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 52b1b66f32d..608d7a12c43 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -447,7 +447,6 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 	u16 fix_size;
 	bool is_ct_kill = false;
 
-	cmd->len = priv->cfg->ops->utils->get_hcmd_size(cmd->id, cmd->len);
 	fix_size = (u16)(cmd->len + sizeof(out_cmd->hdr));
 
 	/*
-- 
cgit v1.2.3


From 8a98d49ec1f38d9f3eef7e34f148c3f1f5590fdf Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 29 Apr 2011 09:48:14 -0700
Subject: iwlagn: remove frame pre-allocation

The frame pre-allocation is quite a bit of complex
code, all to avoid a single allocation. Remove it
and consolidate the beacon sending code.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c | 137 ++++++---------------------------
 drivers/net/wireless/iwlwifi/iwl-dev.h |  13 ----
 2 files changed, 25 insertions(+), 125 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 09fe841f028..3ecc3198d9b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -102,70 +102,6 @@ void iwl_update_chain_flags(struct iwl_priv *priv)
 	}
 }
 
-static void iwl_clear_free_frames(struct iwl_priv *priv)
-{
-	struct list_head *element;
-
-	IWL_DEBUG_INFO(priv, "%d frames on pre-allocated heap on clear.\n",
-		       priv->frames_count);
-
-	while (!list_empty(&priv->free_frames)) {
-		element = priv->free_frames.next;
-		list_del(element);
-		kfree(list_entry(element, struct iwl_frame, list));
-		priv->frames_count--;
-	}
-
-	if (priv->frames_count) {
-		IWL_WARN(priv, "%d frames still in use.  Did we lose one?\n",
-			    priv->frames_count);
-		priv->frames_count = 0;
-	}
-}
-
-static struct iwl_frame *iwl_get_free_frame(struct iwl_priv *priv)
-{
-	struct iwl_frame *frame;
-	struct list_head *element;
-	if (list_empty(&priv->free_frames)) {
-		frame = kzalloc(sizeof(*frame), GFP_KERNEL);
-		if (!frame) {
-			IWL_ERR(priv, "Could not allocate frame!\n");
-			return NULL;
-		}
-
-		priv->frames_count++;
-		return frame;
-	}
-
-	element = priv->free_frames.next;
-	list_del(element);
-	return list_entry(element, struct iwl_frame, list);
-}
-
-static void iwl_free_frame(struct iwl_priv *priv, struct iwl_frame *frame)
-{
-	memset(frame, 0, sizeof(*frame));
-	list_add(&frame->list, &priv->free_frames);
-}
-
-static u32 iwl_fill_beacon_frame(struct iwl_priv *priv,
-				 struct ieee80211_hdr *hdr,
-				 int left)
-{
-	lockdep_assert_held(&priv->mutex);
-
-	if (!priv->beacon_skb)
-		return 0;
-
-	if (priv->beacon_skb->len > left)
-		return 0;
-
-	memcpy(hdr, priv->beacon_skb->data, priv->beacon_skb->len);
-
-	return priv->beacon_skb->len;
-}
-
 /* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
 static void iwl_set_beacon_tim(struct iwl_priv *priv,
 			       struct iwl_tx_beacon_cmd *tx_beacon_cmd,
@@ -193,13 +129,18 @@ static void iwl_set_beacon_tim(struct iwl_priv *priv,
 		IWL_WARN(priv, "Unable to find TIM Element in beacon\n");
 }
 
-static unsigned int iwl_hw_get_beacon_cmd(struct iwl_priv *priv,
-				       struct iwl_frame *frame)
+int iwlagn_send_beacon_cmd(struct iwl_priv *priv)
 {
 	struct iwl_tx_beacon_cmd *tx_beacon_cmd;
+	struct iwl_host_cmd cmd = {
+		.id = REPLY_TX_BEACON,
+		.flags = CMD_SIZE_HUGE,
+	};
 	u32 frame_size;
 	u32 rate_flags;
 	u32 rate;
+	int err;
+
 	/*
 	 * We have to set up the TX command, the TX Beacon command, and the
 	 * beacon contents.
@@ -212,17 +153,19 @@ static unsigned int iwl_hw_get_beacon_cmd(struct iwl_priv *priv,
 		return 0;
 	}
 
-	/* Initialize memory */
-	tx_beacon_cmd = &frame->u.beacon;
-	memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
+	if (WARN_ON(!priv->beacon_skb))
+		return -EINVAL;
+
+	/* Allocate beacon memory */
+	tx_beacon_cmd = kzalloc(sizeof(*tx_beacon_cmd) + priv->beacon_skb->len,
+				GFP_KERNEL);
+	if (!tx_beacon_cmd)
+		return -ENOMEM;
+
+	frame_size = priv->beacon_skb->len;
 
 	/* Set up TX beacon contents */
-	frame_size = iwl_fill_beacon_frame(priv, tx_beacon_cmd->frame,
-				sizeof(frame->u) - sizeof(*tx_beacon_cmd));
-	if (WARN_ON_ONCE(frame_size > MAX_MPDU_SIZE))
-		return 0;
-	if (!frame_size)
-		return 0;
+	memcpy(tx_beacon_cmd->frame, priv->beacon_skb->data, frame_size);
 
 	/* Set up TX command fields */
 	tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
@@ -245,41 +188,16 @@ static unsigned int iwl_hw_get_beacon_cmd(struct iwl_priv *priv,
 	tx_beacon_cmd->tx.rate_n_flags = iwl_hw_set_rate_n_flags(rate,
 			rate_flags);
 
-	return sizeof(*tx_beacon_cmd) + frame_size;
-}
+	/* Submit command */
+	cmd.len = sizeof(*tx_beacon_cmd) + frame_size;
+	cmd.data = tx_beacon_cmd;
 
-int iwlagn_send_beacon_cmd(struct iwl_priv *priv)
-{
-	struct iwl_frame *frame;
-	unsigned int frame_size;
-	int rc;
-	struct iwl_host_cmd cmd = {
-		.id = REPLY_TX_BEACON,
-		.flags = CMD_SIZE_HUGE,
-	};
-
-	frame = iwl_get_free_frame(priv);
-	if (!frame) {
-		IWL_ERR(priv, "Could not obtain free frame buffer for beacon "
-			  "command.\n");
-		return -ENOMEM;
-	}
-
-	frame_size = iwl_hw_get_beacon_cmd(priv, frame);
-	if (!frame_size) {
-		IWL_ERR(priv, "Error configuring the beacon command\n");
-		iwl_free_frame(priv, frame);
-		return -EINVAL;
-	}
-
-	cmd.len = frame_size;
-	cmd.data = &frame->u.cmd[0];
-
-	rc = iwl_send_cmd_sync(priv, &cmd);
+	err = iwl_send_cmd_sync(priv, &cmd);
 
-	iwl_free_frame(priv, frame);
+	/* Free temporary storage */
+	kfree(tx_beacon_cmd);
 
-	return rc;
+	return err;
 }
 
 static inline dma_addr_t iwl_tfd_tb_get_addr(struct iwl_tfd *tfd, u8 idx)
@@ -2356,9 +2274,6 @@ static void __iwl_down(struct iwl_priv *priv)
 
 	dev_kfree_skb(priv->beacon_skb);
 	priv->beacon_skb = NULL;
-
-	/* clear out any free frames */
-	iwl_clear_free_frames(priv);
 }
 
 static void iwl_down(struct iwl_priv *priv)
@@ -3416,8 +3331,6 @@ static int iwl_init_drv(struct iwl_priv *priv)
 	spin_lock_init(&priv->sta_lock);
 	spin_lock_init(&priv->hcmd_lock);
 
-	INIT_LIST_HEAD(&priv->free_frames);
-
 	mutex_init(&priv->mutex);
 
 	priv->ieee_channels = NULL;
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 3d28ad25807..2fd752a9aac 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -238,15 +238,6 @@ struct iwl_channel_info {
 #define IEEE80211_HLEN                  (IEEE80211_4ADDR_LEN)
 #define IEEE80211_FRAME_LEN             (IEEE80211_DATA_LEN + IEEE80211_HLEN)
 
-struct iwl_frame {
-	union {
-		struct ieee80211_hdr frame;
-		struct iwl_tx_beacon_cmd beacon;
-		u8 raw[IEEE80211_FRAME_LEN];
-		u8 cmd[360];
-	} u;
-	struct list_head list;
-};
 
 #define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
 #define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ)
@@ -1188,10 +1179,6 @@ struct iwl_priv {
 	struct ieee80211_rate *ieee_rates;
 	struct iwl_cfg *cfg;
 
-	/* temporary frame storage list */
-	struct list_head free_frames;
-	int frames_count;
-
 	enum ieee80211_band band;
 
 	void (*pre_rx_handler)(struct iwl_priv *priv,
-- 
cgit v1.2.3


From 4c2cde3b59d923d2952ef0accdde892e23b4997b Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Thu, 28 Apr 2011 07:27:07 -0700
Subject: iwlagn: remove unused variable

The variable 'len' here is set but never used.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-tx.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 608d7a12c43..517d1049d7d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -442,7 +442,6 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 	struct iwl_cmd_meta *out_meta;
 	dma_addr_t phys_addr;
 	unsigned long flags;
-	int len;
 	u32 idx;
 	u16 fix_size;
 	bool is_ct_kill = false;
@@ -518,9 +517,6 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 			INDEX_TO_SEQ(q->write_ptr));
 	if (cmd->flags & CMD_SIZE_HUGE)
 		out_cmd->hdr.sequence |= SEQ_HUGE_FRAME;
-	len = sizeof(struct iwl_device_cmd);
-	if (idx == TFD_CMD_SLOTS)
-		len = IWL_MAX_CMD_SIZE;
 
 #ifdef CONFIG_IWLWIFI_DEBUG
 	switch (out_cmd->hdr.cmd) {
-- 
cgit v1.2.3


From ccb6c1c0ec2b76a41c8c85747b1a671e71b97e64 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Thu, 28 Apr 2011 07:27:08 -0700
Subject: iwlagn: dont update bytecount table for command queue

The device doesn't use the bytecount table for the
command queue, only for aggregation queues to make
aggregation decisions. So don't update it for the
command queue (and we even updated it with wrong
values).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn-tx.c | 28 +++++++++++++---------------
 drivers/net/wireless/iwlwifi/iwl-tx.c     |  4 ----
 2 files changed, 13 insertions(+), 19 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
index 494de0e59cb..5445fd6a5a9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
@@ -112,21 +112,19 @@ void iwlagn_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
 
 	WARN_ON(len > 0xFFF || write_ptr >= TFD_QUEUE_SIZE_MAX);
 
-	if (txq_id != priv->cmd_queue) {
-		sta_id = txq->cmd[txq->q.write_ptr]->cmd.tx.sta_id;
-		sec_ctl = txq->cmd[txq->q.write_ptr]->cmd.tx.sec_ctl;
-
-		switch (sec_ctl & TX_CMD_SEC_MSK) {
-		case TX_CMD_SEC_CCM:
-			len += CCMP_MIC_LEN;
-			break;
-		case TX_CMD_SEC_TKIP:
-			len += TKIP_ICV_LEN;
-			break;
-		case TX_CMD_SEC_WEP:
-			len += WEP_IV_LEN + WEP_ICV_LEN;
-			break;
-		}
+	sta_id = txq->cmd[txq->q.write_ptr]->cmd.tx.sta_id;
+	sec_ctl = txq->cmd[txq->q.write_ptr]->cmd.tx.sec_ctl;
+
+	switch (sec_ctl & TX_CMD_SEC_MSK) {
+	case TX_CMD_SEC_CCM:
+		len += CCMP_MIC_LEN;
+		break;
+	case TX_CMD_SEC_TKIP:
+		len += TKIP_ICV_LEN;
+		break;
+	case TX_CMD_SEC_WEP:
+		len += WEP_IV_LEN + WEP_ICV_LEN;
+		break;
 	}
 
 	bc_ent = cpu_to_le16((len & 0xFFF) | (sta_id << 12));
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 517d1049d7d..5a7cd177fe5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -540,10 +540,6 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 #endif
 	txq->need_update = 1;
 
-	if (priv->cfg->ops->lib->txq_update_byte_cnt_tbl)
-		/* Set up entry in queue's byte count circular buffer */
-		priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, 0);
-
 	phys_addr = pci_map_single(priv->pci_dev, &out_cmd->hdr,
 				   fix_size, PCI_DMA_BIDIRECTIONAL);
 	dma_unmap_addr_set(out_meta, mapping, phys_addr);
-- 
cgit v1.2.3


From 94b00658ffc719427c9c09d7920957bc35915c6f Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Thu, 28 Apr 2011 07:27:09 -0700
Subject: iwlagn: remove bytecount indirection

All AGN devices need the bytecount table, so
remove the indirection and make the functions
static again.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-1000.c   |  2 --
 drivers/net/wireless/iwlwifi/iwl-2000.c   |  2 --
 drivers/net/wireless/iwlwifi/iwl-5000.c   |  4 ----
 drivers/net/wireless/iwlwifi/iwl-6000.c   |  4 ----
 drivers/net/wireless/iwlwifi/iwl-agn-tx.c | 17 ++++++++---------
 drivers/net/wireless/iwlwifi/iwl-agn.h    |  5 -----
 drivers/net/wireless/iwlwifi/iwl-core.h   |  5 -----
 7 files changed, 8 insertions(+), 31 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index 3da8cf27dcb..b4c81931e13 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -171,8 +171,6 @@ static int iwl1000_hw_set_hw_params(struct iwl_priv *priv)
 
 static struct iwl_lib_ops iwl1000_lib = {
 	.set_hw_params = iwl1000_hw_set_hw_params,
-	.txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
-	.txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
 	.txq_set_sched = iwlagn_txq_set_sched,
 	.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
 	.txq_free_tfd = iwl_hw_txq_free_tfd,
diff --git a/drivers/net/wireless/iwlwifi/iwl-2000.c b/drivers/net/wireless/iwlwifi/iwl-2000.c
index bca462c47e3..89b8da7a6c8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-2000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-2000.c
@@ -252,8 +252,6 @@ static int iwl2030_hw_channel_switch(struct iwl_priv *priv,
 
 static struct iwl_lib_ops iwl2000_lib = {
 	.set_hw_params = iwl2000_hw_set_hw_params,
-	.txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
-	.txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
 	.txq_set_sched = iwlagn_txq_set_sched,
 	.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
 	.txq_free_tfd = iwl_hw_txq_free_tfd,
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 561f2cd65dd..98f81df166e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -339,8 +339,6 @@ static int iwl5000_hw_channel_switch(struct iwl_priv *priv,
 
 static struct iwl_lib_ops iwl5000_lib = {
 	.set_hw_params = iwl5000_hw_set_hw_params,
-	.txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
-	.txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
 	.txq_set_sched = iwlagn_txq_set_sched,
 	.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
 	.txq_free_tfd = iwl_hw_txq_free_tfd,
@@ -376,8 +374,6 @@ static struct iwl_lib_ops iwl5000_lib = {
 
 static struct iwl_lib_ops iwl5150_lib = {
 	.set_hw_params = iwl5150_hw_set_hw_params,
-	.txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
-	.txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
 	.txq_set_sched = iwlagn_txq_set_sched,
 	.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
 	.txq_free_tfd = iwl_hw_txq_free_tfd,
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index 6045457cc72..a7921f9a03c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -278,8 +278,6 @@ static int iwl6000_hw_channel_switch(struct iwl_priv *priv,
 
 static struct iwl_lib_ops iwl6000_lib = {
 	.set_hw_params = iwl6000_hw_set_hw_params,
-	.txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
-	.txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
 	.txq_set_sched = iwlagn_txq_set_sched,
 	.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
 	.txq_free_tfd = iwl_hw_txq_free_tfd,
@@ -316,8 +314,6 @@ static struct iwl_lib_ops iwl6000_lib = {
 
 static struct iwl_lib_ops iwl6030_lib = {
 	.set_hw_params = iwl6000_hw_set_hw_params,
-	.txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
-	.txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
 	.txq_set_sched = iwlagn_txq_set_sched,
 	.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
 	.txq_free_tfd = iwl_hw_txq_free_tfd,
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
index 5445fd6a5a9..26601b7048f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
@@ -98,9 +98,9 @@ static inline int get_fifo_from_tid(struct iwl_rxon_context *ctx, u16 tid)
 /**
  * iwlagn_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array
  */
-void iwlagn_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
-					    struct iwl_tx_queue *txq,
-					    u16 byte_cnt)
+static void iwlagn_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
+					   struct iwl_tx_queue *txq,
+					   u16 byte_cnt)
 {
 	struct iwlagn_scd_bc_tbl *scd_bc_tbl = priv->scd_bc_tbls.addr;
 	int write_ptr = txq->q.write_ptr;
@@ -136,8 +136,8 @@ void iwlagn_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
 			tfd_offset[TFD_QUEUE_SIZE_MAX + write_ptr] = bc_ent;
 }
 
-void iwlagn_txq_inval_byte_cnt_tbl(struct iwl_priv *priv,
-					   struct iwl_tx_queue *txq)
+static void iwlagn_txq_inval_byte_cnt_tbl(struct iwl_priv *priv,
+					  struct iwl_tx_queue *txq)
 {
 	struct iwlagn_scd_bc_tbl *scd_bc_tbl = priv->scd_bc_tbls.addr;
 	int txq_id = txq->q.id;
@@ -766,8 +766,8 @@ int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 
 	/* Set up entry for this TFD in Tx byte-count array */
 	if (info->flags & IEEE80211_TX_CTL_AMPDU)
-		priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq,
-						     le16_to_cpu(tx_cmd->len));
+		iwlagn_txq_update_byte_cnt_tbl(priv, txq,
+					       le16_to_cpu(tx_cmd->len));
 
 	pci_dma_sync_single_for_device(priv->pci_dev, txcmd_phys,
 				       firstlen, PCI_DMA_BIDIRECTIONAL);
@@ -1246,8 +1246,7 @@ int iwlagn_tx_queue_reclaim(struct iwl_priv *priv, int txq_id, int index)
 				 txq_id >= IWLAGN_FIRST_AMPDU_QUEUE);
 		tx_info->skb = NULL;
 
-		if (priv->cfg->ops->lib->txq_inval_byte_cnt_tbl)
-			priv->cfg->ops->lib->txq_inval_byte_cnt_tbl(priv, txq);
+		iwlagn_txq_inval_byte_cnt_tbl(priv, txq);
 
 		priv->cfg->ops->lib->txq_free_tfd(priv, txq);
 	}
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.h b/drivers/net/wireless/iwlwifi/iwl-agn.h
index aa398b6dab1..fe33fe8aa41 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.h
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.h
@@ -139,11 +139,6 @@ void iwlagn_set_wr_ptrs(struct iwl_priv *priv,
 void iwlagn_tx_queue_set_status(struct iwl_priv *priv,
 			     struct iwl_tx_queue *txq,
 			     int tx_fifo_id, int scd_retry);
-void iwlagn_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
-				    struct iwl_tx_queue *txq,
-				    u16 byte_cnt);
-void iwlagn_txq_inval_byte_cnt_tbl(struct iwl_priv *priv,
-				   struct iwl_tx_queue *txq);
 void iwlagn_txq_set_sched(struct iwl_priv *priv, u32 mask);
 void iwl_free_tfds_in_queue(struct iwl_priv *priv,
 			    int sta_id, int tid, int freed);
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 9d7e36d0fb2..5b5b0cce4a5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -128,11 +128,6 @@ struct iwl_lib_ops {
 	/* set hw dependent parameters */
 	int (*set_hw_params)(struct iwl_priv *priv);
 	/* Handling TX */
-	void (*txq_update_byte_cnt_tbl)(struct iwl_priv *priv,
-					struct iwl_tx_queue *txq,
-					u16 byte_cnt);
-	void (*txq_inval_byte_cnt_tbl)(struct iwl_priv *priv,
-				       struct iwl_tx_queue *txq);
 	void (*txq_set_sched)(struct iwl_priv *priv, u32 mask);
 	int (*txq_attach_buf_to_tfd)(struct iwl_priv *priv,
 				     struct iwl_tx_queue *txq,
-- 
cgit v1.2.3


From 2c46f72e069eef5e98f2b04df08cde6bdc673aa7 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Thu, 28 Apr 2011 07:27:10 -0700
Subject: iwlagn: check DMA mapping errors

DMA mappings can fail, but the current code
doesn't check for that. Add checking, which
requires some restructuring for proper error
paths.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn-tx.c | 60 ++++++++++++++++++-------------
 drivers/net/wireless/iwlwifi/iwl-tx.c     | 13 +++++--
 2 files changed, 45 insertions(+), 28 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
index 26601b7048f..7c1becf9e2c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
@@ -537,7 +537,7 @@ int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	struct iwl_tx_cmd *tx_cmd;
 	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
 	int txq_id;
-	dma_addr_t phys_addr;
+	dma_addr_t phys_addr = 0;
 	dma_addr_t txcmd_phys;
 	dma_addr_t scratch_phys;
 	u16 len, firstlen, secondlen;
@@ -564,7 +564,7 @@ int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	spin_lock_irqsave(&priv->lock, flags);
 	if (iwl_is_rfkill(priv)) {
 		IWL_DEBUG_DROP(priv, "Dropping - RF KILL\n");
-		goto drop_unlock;
+		goto drop_unlock_priv;
 	}
 
 	fc = hdr->frame_control;
@@ -585,7 +585,7 @@ int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	if (sta_id == IWL_INVALID_STATION) {
 		IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
 			       hdr->addr1);
-		goto drop_unlock;
+		goto drop_unlock_priv;
 	}
 
 	IWL_DEBUG_TX(priv, "station Id %d\n", sta_id);
@@ -628,10 +628,10 @@ int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	if (ieee80211_is_data_qos(fc)) {
 		qc = ieee80211_get_qos_ctl(hdr);
 		tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
-		if (WARN_ON_ONCE(tid >= MAX_TID_COUNT)) {
-			spin_unlock(&priv->sta_lock);
-			goto drop_unlock;
-		}
+
+		if (WARN_ON_ONCE(tid >= MAX_TID_COUNT))
+			goto drop_unlock_sta;
+
 		seq_number = priv->stations[sta_id].tid[tid].seq_number;
 		seq_number &= IEEE80211_SCTL_SEQ;
 		hdr->seq_ctrl = hdr->seq_ctrl &
@@ -649,18 +649,8 @@ int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	txq = &priv->txq[txq_id];
 	q = &txq->q;
 
-	if (unlikely(iwl_queue_space(q) < q->high_mark)) {
-		spin_unlock(&priv->sta_lock);
-		goto drop_unlock;
-	}
-
-	if (ieee80211_is_data_qos(fc)) {
-		priv->stations[sta_id].tid[tid].tfds_in_queue++;
-		if (!ieee80211_has_morefrags(fc))
-			priv->stations[sta_id].tid[tid].seq_number = seq_number;
-	}
-
-	spin_unlock(&priv->sta_lock);
+	if (unlikely(iwl_queue_space(q) < q->high_mark))
+		goto drop_unlock_sta;
 
 	/* Set up driver data for this TFD */
 	memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct iwl_tx_info));
@@ -724,12 +714,10 @@ int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	txcmd_phys = pci_map_single(priv->pci_dev,
 				    &out_cmd->hdr, firstlen,
 				    PCI_DMA_BIDIRECTIONAL);
+	if (unlikely(pci_dma_mapping_error(priv->pci_dev, txcmd_phys)))
+		goto drop_unlock_sta;
 	dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
 	dma_unmap_len_set(out_meta, len, firstlen);
-	/* Add buffer containing Tx command and MAC(!) header to TFD's
-	 * first entry */
-	priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
-						   txcmd_phys, firstlen, 1, 0);
 
 	if (!ieee80211_has_morefrags(hdr->frame_control)) {
 		txq->need_update = 1;
@@ -744,10 +732,30 @@ int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	if (secondlen > 0) {
 		phys_addr = pci_map_single(priv->pci_dev, skb->data + hdr_len,
 					   secondlen, PCI_DMA_TODEVICE);
+		if (unlikely(pci_dma_mapping_error(priv->pci_dev, phys_addr))) {
+			pci_unmap_single(priv->pci_dev,
+					 dma_unmap_addr(out_meta, mapping),
+					 dma_unmap_len(out_meta, len),
+					 PCI_DMA_BIDIRECTIONAL);
+			goto drop_unlock_sta;
+		}
+	}
+
+	if (ieee80211_is_data_qos(fc)) {
+		priv->stations[sta_id].tid[tid].tfds_in_queue++;
+		if (!ieee80211_has_morefrags(fc))
+			priv->stations[sta_id].tid[tid].seq_number = seq_number;
+	}
+
+	spin_unlock(&priv->sta_lock);
+
+	/* Attach buffers to TFD */
+	priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
+						   txcmd_phys, firstlen, 1, 0);
+	if (secondlen > 0)
 		priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
 							   phys_addr, secondlen,
 							   0, 0);
-	}
 
 	scratch_phys = txcmd_phys + sizeof(struct iwl_cmd_header) +
 				offsetof(struct iwl_tx_cmd, scratch);
@@ -813,7 +821,9 @@ int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 
 	return 0;
 
-drop_unlock:
+drop_unlock_sta:
+	spin_unlock(&priv->sta_lock);
+drop_unlock_priv:
 	spin_unlock_irqrestore(&priv->lock, flags);
 	return -1;
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 5a7cd177fe5..e69597ea43e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -500,7 +500,6 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 	}
 
 	memset(out_meta, 0, sizeof(*out_meta));	/* re-initialize to NULL */
-	out_meta->flags = cmd->flags | CMD_MAPPED;
 	if (cmd->flags & CMD_WANT_SKB)
 		out_meta->source = cmd;
 	if (cmd->flags & CMD_ASYNC)
@@ -538,13 +537,20 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 				q->write_ptr, idx, priv->cmd_queue);
 	}
 #endif
-	txq->need_update = 1;
-
 	phys_addr = pci_map_single(priv->pci_dev, &out_cmd->hdr,
 				   fix_size, PCI_DMA_BIDIRECTIONAL);
+	if (unlikely(pci_dma_mapping_error(priv->pci_dev, phys_addr))) {
+		idx = -ENOMEM;
+		goto out;
+	}
+
 	dma_unmap_addr_set(out_meta, mapping, phys_addr);
 	dma_unmap_len_set(out_meta, len, fix_size);
 
+	out_meta->flags = cmd->flags | CMD_MAPPED;
+
+	txq->need_update = 1;
+
 	trace_iwlwifi_dev_hcmd(priv, &out_cmd->hdr, fix_size, cmd->flags);
 
 	priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
@@ -555,6 +561,7 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 	q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
 	iwl_txq_update_write_ptr(priv, txq);
 
+ out:
 	spin_unlock_irqrestore(&priv->hcmd_lock, flags);
 	return idx;
 }
-- 
cgit v1.2.3


From 6572e91d5fa61bb3f879a00b96d763c566ced6cb Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanoharan@atheros.com>
Date: Mon, 25 Apr 2011 15:56:16 +0530
Subject: wireless: Fix warnings due to -Wunused-but-set-variable

These warnings are exposed by gcc 4.6.
net/wireless/reg.c: In function 'freq_reg_info_regd':
net/wireless/reg.c:675:38: warning: variable 'pr' set but not used
[-Wunused-but-set-variable]
net/wireless/lib80211_crypt_wep.c: In function 'lib80211_wep_build_iv':
net/wireless/lib80211_crypt_wep.c:99:12: warning: variable 'len' set but
not used [-Wunused-but-set-variable]

Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/wireless/lib80211_crypt_wep.c | 3 +--
 net/wireless/reg.c                | 2 --
 2 files changed, 1 insertion(+), 4 deletions(-)

diff --git a/net/wireless/lib80211_crypt_wep.c b/net/wireless/lib80211_crypt_wep.c
index e2e88878ba3..2f265e033ae 100644
--- a/net/wireless/lib80211_crypt_wep.c
+++ b/net/wireless/lib80211_crypt_wep.c
@@ -96,13 +96,12 @@ static int lib80211_wep_build_iv(struct sk_buff *skb, int hdr_len,
 			       u8 *key, int keylen, void *priv)
 {
 	struct lib80211_wep_data *wep = priv;
-	u32 klen, len;
+	u32 klen;
 	u8 *pos;
 
 	if (skb_headroom(skb) < 4 || skb->len < hdr_len)
 		return -1;
 
-	len = skb->len - hdr_len;
 	pos = skb_push(skb, 4);
 	memmove(pos, pos + 4, hdr_len);
 	pos += hdr_len;
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 8982053f996..798cb4cd070 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -672,11 +672,9 @@ static int freq_reg_info_regd(struct wiphy *wiphy,
 	for (i = 0; i < regd->n_reg_rules; i++) {
 		const struct ieee80211_reg_rule *rr;
 		const struct ieee80211_freq_range *fr = NULL;
-		const struct ieee80211_power_rule *pr = NULL;
 
 		rr = &regd->reg_rules[i];
 		fr = &rr->freq_range;
-		pr = &rr->power_rule;
 
 		/*
 		 * We only need to know if one frequency rule was
-- 
cgit v1.2.3


From 3782cf4a04c272bdaa8476463b1d0208edbc505d Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Sat, 30 Apr 2011 08:38:16 -0700
Subject: iwlagn: led stay solid on when no traffic

commit 5ed540aecc2aae92d5c97b9a9306a5bf88ad5574 change the led behavior
for iwlwifi driver; the side effect cause led blink all the time.

Modify the led blink table to fix this problem

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-led.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c
index d798c2a152d..439187f903c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-led.c
@@ -48,8 +48,21 @@ module_param(led_mode, int, S_IRUGO);
 MODULE_PARM_DESC(led_mode, "0=system default, "
 		"1=On(RF On)/Off(RF Off), 2=blinking");
 
+/* Throughput		OFF time(ms)	ON time (ms)
+ *	>300			25		25
+ *	>200 to 300		40		40
+ *	>100 to 200		55		55
+ *	>70 to 100		65		65
+ *	>50 to 70		75		75
+ *	>20 to 50		85		85
+ *	>10 to 20		95		95
+ *	>5 to 10		110		110
+ *	>1 to 5			130		130
+ *	>0 to 1			167		167
+ *	<=0					SOLID ON
+ */
 static const struct ieee80211_tpt_blink iwl_blink[] = {
-	{ .throughput = 0 * 1024 - 1, .blink_time = 334 },
+	{ .throughput = 0, .blink_time = 334 },
 	{ .throughput = 1 * 1024 - 1, .blink_time = 260 },
 	{ .throughput = 5 * 1024 - 1, .blink_time = 220 },
 	{ .throughput = 10 * 1024 - 1, .blink_time = 190 },
@@ -125,6 +138,11 @@ static int iwl_led_cmd(struct iwl_priv *priv,
 	if (priv->blink_on == on && priv->blink_off == off)
 		return 0;
 
+	if (off == 0) {
+		/* led is SOLID_ON */
+		on = IWL_LED_SOLID;
+	}
+
 	IWL_DEBUG_LED(priv, "Led blink time compensation=%u\n",
 			priv->cfg->base_params->led_compensation);
 	led_cmd.on = iwl_blink_compensation(priv, on,
-- 
cgit v1.2.3


From 38bb3e9da62f6ebf1c6940d5482f0d6f431dac1c Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Thu, 5 May 2011 18:48:47 -0500
Subject: mac80211: Fix build error when CONFIG_PM is not defined
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

When mac80211 is built without CONFIG_PM being defined, the following errors
are output:

net/mac80211/main.c: In function ‘ieee80211_register_hw’:
net/mac80211/main.c:700: error: ‘const struct ieee80211_ops’ has no member named ‘suspend’
net/mac80211/main.c:700: error: ‘const struct ieee80211_ops’ has no member named ‘resume’
make[2]: *** [net/mac80211/main.o] Error 1
make[1]: *** [net/mac80211] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [net] Error 2

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/main.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index cb326d36be9..ab1f464817a 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -696,8 +696,11 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 		WLAN_CIPHER_SUITE_AES_CMAC
 	};
 
-	if ((hw->wiphy->wowlan.flags || hw->wiphy->wowlan.n_patterns) &&
-	    (!local->ops->suspend || !local->ops->resume))
+	if ((hw->wiphy->wowlan.flags || hw->wiphy->wowlan.n_patterns)
+#ifdef CONFIG_PM
+	    && (!local->ops->suspend || !local->ops->resume)
+#endif
+	    )
 		return -EINVAL;
 
 	if (hw->max_report_rates == 0)
-- 
cgit v1.2.3


From deb751880af6f2dce6cdc232a7b023f2b58cd815 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanoharan@atheros.com>
Date: Fri, 6 May 2011 18:27:46 +0530
Subject: ath9k: avoid enabling interrupts while processing rx

The assumsion is that while processing ath9k tasklet,
interrupts were already disabled and it will be enabled
at the completion of ath9k tasklet. But whenever TSFOOR is raised,
the driver configures the beacon timers after having received a
beacon frame from the AP which inturn enables the interrupts.

Cc: stable@kernel.org
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ath9k.h  |  1 +
 drivers/net/wireless/ath/ath9k/beacon.c | 15 +++++++++++++--
 drivers/net/wireless/ath/ath9k/main.c   |  3 ++-
 drivers/net/wireless/ath/ath9k/recv.c   |  1 +
 4 files changed, 17 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 1bffd156b15..f2f672bc596 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -564,6 +564,7 @@ struct ath_ant_comb {
 #define PS_WAIT_FOR_PSPOLL_DATA   BIT(2)
 #define PS_WAIT_FOR_TX_ACK        BIT(3)
 #define PS_BEACON_SYNC            BIT(4)
+#define PS_TSFOOR_SYNC            BIT(5)
 
 struct ath_rate_table;
 
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 22cd241a098..637dbc5f7b6 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -620,7 +620,13 @@ static void ath_beacon_config_sta(struct ath_softc *sc,
 	ath9k_hw_disable_interrupts(ah);
 	ath9k_hw_set_sta_beacon_timers(ah, &bs);
 	ah->imask |= ATH9K_INT_BMISS;
-	ath9k_hw_set_interrupts(ah, ah->imask);
+
+	/*
+	 * If the beacon config is called beacause of TSFOOR,
+	 * Interrupts will be enabled back at the end of ath9k_tasklet
+	 */
+	if (!(sc->ps_flags & PS_TSFOOR_SYNC))
+		ath9k_hw_set_interrupts(ah, ah->imask);
 }
 
 static void ath_beacon_config_adhoc(struct ath_softc *sc,
@@ -661,7 +667,12 @@ static void ath_beacon_config_adhoc(struct ath_softc *sc,
 	ath9k_hw_disable_interrupts(ah);
 	ath9k_beacon_init(sc, nexttbtt, intval);
 	sc->beacon.bmisscnt = 0;
-	ath9k_hw_set_interrupts(ah, ah->imask);
+	/*
+	 * If the beacon config is called beacause of TSFOOR,
+	 * Interrupts will be enabled back at the end of ath9k_tasklet
+	 */
+	if (!(sc->ps_flags & PS_TSFOOR_SYNC))
+		ath9k_hw_set_interrupts(ah, ah->imask);
 }
 
 static bool ath9k_allow_beacon_config(struct ath_softc *sc,
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 3de115df916..c171d111ecf 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -718,7 +718,8 @@ void ath9k_tasklet(unsigned long data)
 		 */
 		ath_dbg(common, ATH_DBG_PS,
 			"TSFOOR - Sync with next Beacon\n");
-		sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC;
+		sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC |
+				PS_TSFOOR_SYNC;
 	}
 
 	if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index c5b7cbe59bf..a485c040bf8 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -572,6 +572,7 @@ static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb)
 		ath_dbg(common, ATH_DBG_PS,
 			"Reconfigure Beacon timers based on timestamp from the AP\n");
 		ath_set_beacon(sc);
+		sc->ps_flags &= ~PS_TSFOOR_SYNC;
 	}
 
 	if (ath_beacon_dtim_pending_cab(skb)) {
-- 
cgit v1.2.3


From 4105f8075051b62816830c95de1ec17ceb364d09 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanoharan@atheros.com>
Date: Fri, 6 May 2011 18:27:47 +0530
Subject: ath9k: process TSF out of range before RX

Processing TSF out of range before RX helps to update beacon
timers so early in the succeeding rx process.

Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/main.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index c171d111ecf..11d9eca8fb6 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -689,6 +689,17 @@ void ath9k_tasklet(unsigned long data)
 	    !ath9k_hw_check_alive(ah))
 		ieee80211_queue_work(sc->hw, &sc->hw_check_work);
 
+	if ((status & ATH9K_INT_TSFOOR) && sc->ps_enabled) {
+		/*
+		 * TSF sync does not look correct; remain awake to sync with
+		 * the next Beacon.
+		 */
+		ath_dbg(common, ATH_DBG_PS,
+			"TSFOOR - Sync with next Beacon\n");
+		sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC |
+				PS_TSFOOR_SYNC;
+	}
+
 	if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
 		rxmask = (ATH9K_INT_RXHP | ATH9K_INT_RXLP | ATH9K_INT_RXEOL |
 			  ATH9K_INT_RXORN);
@@ -711,17 +722,6 @@ void ath9k_tasklet(unsigned long data)
 			ath_tx_tasklet(sc);
 	}
 
-	if ((status & ATH9K_INT_TSFOOR) && sc->ps_enabled) {
-		/*
-		 * TSF sync does not look correct; remain awake to sync with
-		 * the next Beacon.
-		 */
-		ath_dbg(common, ATH_DBG_PS,
-			"TSFOOR - Sync with next Beacon\n");
-		sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC |
-				PS_TSFOOR_SYNC;
-	}
-
 	if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
 		if (status & ATH9K_INT_GENTIMER)
 			ath_gen_timer_isr(sc->sc_ah);
-- 
cgit v1.2.3


From 054ec924944912413e4ee927b8cf02f476d08783 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 6 May 2011 11:11:20 -0700
Subject: iwlagn: fix iwl_is_any_associated

The function iwl_is_any_associated() was intended
to check both contexts, but due to an oversight
it only checks the BSS context. This leads to a
problem with scanning since the passive dwell
time isn't restricted appropriately and a scan
that includes passive channels will never finish
if only the PAN context is associated since the
default dwell time of 120ms won't fit into the
normal 100 TU DTIM interval.

Fix the function by using for_each_context() and
also reorganise the other functions a bit to take
advantage of each other making the code easier to
read.

Cc: stable@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-dev.h | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 2fd752a9aac..214e4658c49 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1558,21 +1558,24 @@ iwl_rxon_ctx_from_vif(struct ieee80211_vif *vif)
 	     ctx < &priv->contexts[NUM_IWL_RXON_CTX]; ctx++)	\
 		if (priv->valid_contexts & BIT(ctx->ctxid))
 
-static inline int iwl_is_associated(struct iwl_priv *priv,
-				    enum iwl_rxon_context_id ctxid)
+static inline int iwl_is_associated_ctx(struct iwl_rxon_context *ctx)
 {
-	return (priv->contexts[ctxid].active.filter_flags &
-			RXON_FILTER_ASSOC_MSK) ? 1 : 0;
+	return (ctx->active.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0;
 }
 
-static inline int iwl_is_any_associated(struct iwl_priv *priv)
+static inline int iwl_is_associated(struct iwl_priv *priv,
+				    enum iwl_rxon_context_id ctxid)
 {
-	return iwl_is_associated(priv, IWL_RXON_CTX_BSS);
+	return iwl_is_associated_ctx(&priv->contexts[ctxid]);
 }
 
-static inline int iwl_is_associated_ctx(struct iwl_rxon_context *ctx)
+static inline int iwl_is_any_associated(struct iwl_priv *priv)
 {
-	return (ctx->active.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0;
+	struct iwl_rxon_context *ctx;
+	for_each_context(priv, ctx)
+		if (iwl_is_associated_ctx(ctx))
+			return true;
+	return false;
 }
 
 static inline int is_channel_valid(const struct iwl_channel_info *ch_info)
-- 
cgit v1.2.3


From c84aa5af996a306c8ce66aac2cc4d5f4a74e27ca Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Fri, 6 May 2011 13:56:18 -0500
Subject: rtlwifi: Move 2 large arrays off stack

In driver rtlwifi, efuse_read() places two relatively large arrays on the
stack - a 1D u8 array of size 128, and a 2D array of u16 with 128 * 4 elements.
With driver rtl8192de, the sizes will be 256 and 256 * 4 respectively. As that
will make the 2D array be 2048 bytes, I have changed the code to use kmalloc to
allocate the space.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/efuse.c | 35 ++++++++++++++++++++++++++++-------
 1 file changed, 28 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/rtlwifi/efuse.c b/drivers/net/wireless/rtlwifi/efuse.c
index 510d42edb8c..50de6f5d8a5 100644
--- a/drivers/net/wireless/rtlwifi/efuse.c
+++ b/drivers/net/wireless/rtlwifi/efuse.c
@@ -235,7 +235,7 @@ void read_efuse(struct ieee80211_hw *hw, u16 _offset, u16 _size_byte, u8 *pbuf)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
-	u8 efuse_tbl[HWSET_MAX_SIZE];
+	u8 *efuse_tbl;
 	u8 rtemp8[1];
 	u16 efuse_addr = 0;
 	u8 offset, wren;
@@ -245,7 +245,7 @@ void read_efuse(struct ieee80211_hw *hw, u16 _offset, u16 _size_byte, u8 *pbuf)
 		rtlpriv->cfg->maps[EFUSE_MAX_SECTION_MAP];
 	const u32 efuse_len =
 		rtlpriv->cfg->maps[EFUSE_REAL_CONTENT_SIZE];
-	u16 efuse_word[EFUSE_MAX_SECTION][EFUSE_MAX_WORD_UNIT];
+	u16 **efuse_word;
 	u16 efuse_utilized = 0;
 	u8 efuse_usage;
 
@@ -256,9 +256,24 @@ void read_efuse(struct ieee80211_hw *hw, u16 _offset, u16 _size_byte, u8 *pbuf)
 		return;
 	}
 
+	/* allocate memory for efuse_tbl and efuse_word */
+	efuse_tbl = kmalloc(rtlpriv->cfg->maps[EFUSE_HWSET_MAX_SIZE] *
+			    sizeof(u8), GFP_ATOMIC);
+	if (!efuse_tbl)
+		return;
+	efuse_word = kmalloc(EFUSE_MAX_WORD_UNIT * sizeof(u16 *), GFP_ATOMIC);
+	if (!efuse_word)
+		goto done;
+	for (i = 0; i < EFUSE_MAX_WORD_UNIT; i++) {
+		efuse_word[i] = kmalloc(efuse_max_section * sizeof(u16),
+					GFP_ATOMIC);
+		if (!efuse_word[i])
+			goto done;
+	}
+
 	for (i = 0; i < efuse_max_section; i++)
 		for (j = 0; j < EFUSE_MAX_WORD_UNIT; j++)
-			efuse_word[i][j] = 0xFFFF;
+			efuse_word[j][i] = 0xFFFF;
 
 	read_efuse_byte(hw, efuse_addr, rtemp8);
 	if (*rtemp8 != 0xFF) {
@@ -285,7 +300,8 @@ void read_efuse(struct ieee80211_hw *hw, u16 _offset, u16 _size_byte, u8 *pbuf)
 					read_efuse_byte(hw, efuse_addr, rtemp8);
 					efuse_addr++;
 					efuse_utilized++;
-					efuse_word[offset][i] = (*rtemp8 & 0xff);
+					efuse_word[i][offset] =
+							 (*rtemp8 & 0xff);
 
 					if (efuse_addr >= efuse_len)
 						break;
@@ -297,7 +313,7 @@ void read_efuse(struct ieee80211_hw *hw, u16 _offset, u16 _size_byte, u8 *pbuf)
 					read_efuse_byte(hw, efuse_addr, rtemp8);
 					efuse_addr++;
 					efuse_utilized++;
-					efuse_word[offset][i] |=
+					efuse_word[i][offset] |=
 					    (((u16)*rtemp8 << 8) & 0xff00);
 
 					if (efuse_addr >= efuse_len)
@@ -320,9 +336,9 @@ void read_efuse(struct ieee80211_hw *hw, u16 _offset, u16 _size_byte, u8 *pbuf)
 	for (i = 0; i < efuse_max_section; i++) {
 		for (j = 0; j < EFUSE_MAX_WORD_UNIT; j++) {
 			efuse_tbl[(i * 8) + (j * 2)] =
-			    (efuse_word[i][j] & 0xff);
+			    (efuse_word[j][i] & 0xff);
 			efuse_tbl[(i * 8) + ((j * 2) + 1)] =
-			    ((efuse_word[i][j] >> 8) & 0xff);
+			    ((efuse_word[j][i] >> 8) & 0xff);
 		}
 	}
 
@@ -336,6 +352,11 @@ void read_efuse(struct ieee80211_hw *hw, u16 _offset, u16 _size_byte, u8 *pbuf)
 				      (u8 *)&efuse_utilized);
 	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_EFUSE_USAGE,
 				      (u8 *)&efuse_usage);
+done:
+	for (i = 0; i < EFUSE_MAX_WORD_UNIT; i++)
+		kfree(efuse_word[i]);
+	kfree(efuse_word);
+	kfree(efuse_tbl);
 }
 
 bool efuse_shadow_update_chk(struct ieee80211_hw *hw)
-- 
cgit v1.2.3


From fc7707a469785fe786ddc66d723c150226ddc40e Mon Sep 17 00:00:00 2001
From: Chaoming Li <chaoming_li@realsil.com.cn>
Date: Fri, 6 May 2011 15:32:02 -0500
Subject: rtlwifi: rtl8192se: Remove need to disable ASPM

When this driver was initially submitted, the system would crash unless
ASPM was disabled. This problem has been fixed.

This patch also adds a printk that outputs the name of the firmware
file that is used.

Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/pci.c          | 1 +
 drivers/net/wireless/rtlwifi/rtl8192se/sw.c | 4 +++-
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 3550c9fb96e..a4095284543 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -1611,6 +1611,7 @@ static bool _rtl_pci_find_adapter(struct pci_dev *pdev,
 	u16 irqline;
 	u8 tmp;
 
+	pcipriv->ndis_adapter.pcibridge_vendor = PCI_BRIDGE_VENDOR_UNKNOWN;
 	venderid = pdev->vendor;
 	deviceid = pdev->device;
 	pci_read_config_byte(pdev, 0x8, &revisionid);
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
index 7cfd6a2cb14..1c6cb1d7d66 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
@@ -58,7 +58,7 @@ static void rtl92s_init_aspm_vars(struct ieee80211_hw *hw)
 	 * 4 - Always Enable ASPM without Clock Req.
 	 * set defult to RTL8192CE:3 RTL8192E:2
 	 * */
-	rtlpci->const_pci_aspm = 0; /* changed from 2 due to crashes */
+	rtlpci->const_pci_aspm = 2;
 
 	/*Setting for PCI-E device */
 	rtlpci->const_devicepci_aspm_setting = 0x03;
@@ -183,6 +183,8 @@ static int rtl92s_init_sw_vars(struct ieee80211_hw *hw)
 		return 1;
 	}
 
+	printk(KERN_INFO "rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE\n"
+	       "           Loading firmware %s\n", rtlpriv->cfg->fw_name);
 	/* request fw */
 	err = request_firmware(&firmware, rtlpriv->cfg->fw_name,
 			rtlpriv->io.dev);
-- 
cgit v1.2.3


From 6490e334bc3af960965adfcef5acf6e5cbdd925c Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Sat, 7 May 2011 11:13:37 +0200
Subject: carl9170: fix -Wunused-but-set-variable warnings
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

tx.c: In function ‘carl9170_tx_accounting_free’:
tx.c:159:28: warning: variable ‘txinfo’ set but not used
tx.c: In function ‘carl9170_tx_status_process_ampdu’:
tx.c:383:27: warning: variable ‘ar_info’ set but not used
tx.c: In function ‘__carl9170_tx_process_status’:
tx.c:626:27: warning: variable ‘arinfo’ set but not used
tx.c: In function ‘carl9170_tx_ampdu_queue’:
tx.c:1324:15: warning: variable ‘max’ set but not used

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/carl9170/tx.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/net/wireless/ath/carl9170/tx.c b/drivers/net/wireless/ath/carl9170/tx.c
index bf2eff9dd58..e94084fcf6f 100644
--- a/drivers/net/wireless/ath/carl9170/tx.c
+++ b/drivers/net/wireless/ath/carl9170/tx.c
@@ -156,10 +156,8 @@ out_rcu:
 
 static void carl9170_tx_accounting_free(struct ar9170 *ar, struct sk_buff *skb)
 {
-	struct ieee80211_tx_info *txinfo;
 	int queue;
 
-	txinfo = IEEE80211_SKB_CB(skb);
 	queue = skb_get_queue_mapping(skb);
 
 	spin_lock_bh(&ar->tx_stats_lock);
@@ -380,7 +378,6 @@ static void carl9170_tx_status_process_ampdu(struct ar9170 *ar,
 {
 	struct _carl9170_tx_superframe *super = (void *) skb->data;
 	struct ieee80211_hdr *hdr = (void *) super->frame_data;
-	struct carl9170_tx_info *ar_info;
 	struct ieee80211_sta *sta;
 	struct carl9170_sta_info *sta_info;
 	struct carl9170_sta_tid *tid_info;
@@ -391,8 +388,6 @@ static void carl9170_tx_status_process_ampdu(struct ar9170 *ar,
 	   (!(super->f.mac_control & cpu_to_le16(AR9170_TX_MAC_AGGR))))
 		return;
 
-	ar_info = (void *) txinfo->rate_driver_data;
-
 	rcu_read_lock();
 	sta = __carl9170_get_tx_sta(ar, skb);
 	if (unlikely(!sta))
@@ -623,7 +618,6 @@ static void __carl9170_tx_process_status(struct ar9170 *ar,
 {
 	struct sk_buff *skb;
 	struct ieee80211_tx_info *txinfo;
-	struct carl9170_tx_info *arinfo;
 	unsigned int r, t, q;
 	bool success = true;
 
@@ -639,7 +633,6 @@ static void __carl9170_tx_process_status(struct ar9170 *ar,
 	}
 
 	txinfo = IEEE80211_SKB_CB(skb);
-	arinfo = (void *) txinfo->rate_driver_data;
 
 	if (!(info & CARL9170_TX_STATUS_SUCCESS))
 		success = false;
@@ -1321,7 +1314,6 @@ static bool carl9170_tx_ampdu_queue(struct ar9170 *ar,
 	struct carl9170_sta_info *sta_info;
 	struct carl9170_sta_tid *agg;
 	struct sk_buff *iter;
-	unsigned int max;
 	u16 tid, seq, qseq, off;
 	bool run = false;
 
@@ -1331,7 +1323,6 @@ static bool carl9170_tx_ampdu_queue(struct ar9170 *ar,
 
 	rcu_read_lock();
 	agg = rcu_dereference(sta_info->agg[tid]);
-	max = sta_info->ampdu_max_len;
 
 	if (!agg)
 		goto err_unlock_rcu;
-- 
cgit v1.2.3


From 1816fcdcbbe9ff42ba1a9dac5198d18efb9d95e9 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Sat, 7 May 2011 11:16:08 +0200
Subject: p54pci: fix -Wunused-but-set-variable warnings
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

p54pci.c: In function ‘p54p_tx’:
p54pci.c:334:6: warning: variable ‘device_idx’ set but not used

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/p54/p54pci.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c
index 0494d7b102d..1b753173680 100644
--- a/drivers/net/wireless/p54/p54pci.c
+++ b/drivers/net/wireless/p54/p54pci.c
@@ -331,10 +331,9 @@ static void p54p_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 	struct p54p_ring_control *ring_control = priv->ring_control;
 	struct p54p_desc *desc;
 	dma_addr_t mapping;
-	u32 device_idx, idx, i;
+	u32 idx, i;
 
 	spin_lock_irqsave(&priv->lock, flags);
-	device_idx = le32_to_cpu(ring_control->device_idx[1]);
 	idx = le32_to_cpu(ring_control->host_idx[1]);
 	i = idx % ARRAY_SIZE(ring_control->tx_data);
 
-- 
cgit v1.2.3


From 9a24af1136e6d08c73010205caa282f46223aed5 Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Sat, 7 May 2011 17:27:46 +0200
Subject: rt2x00: Fix rmmod hang of rt2800pci

txstatus_timer should only be deleted for USB devices, as it is only
initialized for USB devices.

Reported-by: Andreas Hartmann <andihartmann@01019freenet.de>
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 2eb5196977f..c018d67aab8 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -1159,9 +1159,9 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Stop all work.
 	 */
-	del_timer_sync(&rt2x00dev->txstatus_timer);
 	cancel_work_sync(&rt2x00dev->intf_work);
 	if (rt2x00_is_usb(rt2x00dev)) {
+		del_timer_sync(&rt2x00dev->txstatus_timer);
 		cancel_work_sync(&rt2x00dev->rxdone_work);
 		cancel_work_sync(&rt2x00dev->txdone_work);
 	}
-- 
cgit v1.2.3


From 25ea0dd9ffb7459f3b2948430f75d99b46ca1870 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Sun, 8 May 2011 20:30:32 +0200
Subject: b43: drop ssb-duplicated workaround for dangling cores
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Remove the code to detect inactive 802.11 cores, as that function is now done
in ssb.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c | 17 -----------------
 1 file changed, 17 deletions(-)

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 675e288a3c5..70838e82534 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4836,25 +4836,8 @@ static void b43_one_core_detach(struct ssb_device *dev)
 static int b43_one_core_attach(struct ssb_device *dev, struct b43_wl *wl)
 {
 	struct b43_wldev *wldev;
-	struct pci_dev *pdev;
 	int err = -ENOMEM;
 
-	if (!list_empty(&wl->devlist)) {
-		/* We are not the first core on this chip. */
-		pdev = (dev->bus->bustype == SSB_BUSTYPE_PCI) ? dev->bus->host_pci : NULL;
-		/* Only special chips support more than one wireless
-		 * core, although some of the other chips have more than
-		 * one wireless core as well. Check for this and
-		 * bail out early.
-		 */
-		if (!pdev ||
-		    ((pdev->device != 0x4321) &&
-		     (pdev->device != 0x4313) && (pdev->device != 0x431A))) {
-			b43dbg(wl, "Ignoring unconnected 802.11 core\n");
-			return -ENODEV;
-		}
-	}
-
 	wldev = kzalloc(sizeof(*wldev), GFP_KERNEL);
 	if (!wldev)
 		goto out;
-- 
cgit v1.2.3


From 3ed3f49473985718ce51f84d990ed5b8b6472598 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Sun, 8 May 2011 20:30:33 +0200
Subject: b43legacy: drop ssb-duplicated workaround for dangling cores
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Remove the code to detect inactive 802.11 cores, as that function is now done
in ssb.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43legacy/main.c | 18 ------------------
 1 file changed, 18 deletions(-)

diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 2162663293c..f6d54463b24 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -3696,26 +3696,8 @@ static int b43legacy_one_core_attach(struct ssb_device *dev,
 				     struct b43legacy_wl *wl)
 {
 	struct b43legacy_wldev *wldev;
-	struct pci_dev *pdev;
 	int err = -ENOMEM;
 
-	if (!list_empty(&wl->devlist)) {
-		/* We are not the first core on this chip. */
-		pdev = (dev->bus->bustype == SSB_BUSTYPE_PCI) ? dev->bus->host_pci : NULL;
-		/* Only special chips support more than one wireless
-		 * core, although some of the other chips have more than
-		 * one wireless core as well. Check for this and
-		 * bail out early.
-		 */
-		if (!pdev ||
-		    ((pdev->device != 0x4321) &&
-		     (pdev->device != 0x4313) &&
-		     (pdev->device != 0x431A))) {
-			b43legacydbg(wl, "Ignoring unconnected 802.11 core\n");
-			return -ENODEV;
-		}
-	}
-
 	wldev = kzalloc(sizeof(*wldev), GFP_KERNEL);
 	if (!wldev)
 		goto out;
-- 
cgit v1.2.3


From b53575ecf939a4f752de87eabf1adbcfa4478a6c Mon Sep 17 00:00:00 2001
From: Christoph Fritz <chf.fritz@googlemail.com>
Date: Sun, 8 May 2011 22:50:09 +0200
Subject: mwifiex: fix null derefs, mem leaks and trivia

This patch:
 - adds kfree() where necessary
 - prevents potential null dereferences
 - makes use of kfree_skb()
 - replaces -1 for failed kzallocs with -ENOMEM

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Reviewed-by: Kiran Divekar <dkiran@marvell.com>
Tested-by: Amitkumar Karwar <akarwar@marvell.com>
Acked-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/11n_aggr.c  | 6 ++++--
 drivers/net/wireless/mwifiex/cfg80211.c  | 5 ++++-
 drivers/net/wireless/mwifiex/cmdevt.c    | 2 +-
 drivers/net/wireless/mwifiex/init.c      | 4 ++--
 drivers/net/wireless/mwifiex/main.c      | 8 ++++----
 drivers/net/wireless/mwifiex/scan.c      | 8 ++++----
 drivers/net/wireless/mwifiex/sdio.c      | 5 +++--
 drivers/net/wireless/mwifiex/sta_ioctl.c | 2 +-
 8 files changed, 23 insertions(+), 17 deletions(-)

diff --git a/drivers/net/wireless/mwifiex/11n_aggr.c b/drivers/net/wireless/mwifiex/11n_aggr.c
index 12cf4246f96..2b2cca5e6d0 100644
--- a/drivers/net/wireless/mwifiex/11n_aggr.c
+++ b/drivers/net/wireless/mwifiex/11n_aggr.c
@@ -318,7 +318,8 @@ mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv,
 		else
 			skb_src = NULL;
 
-		pra_list->total_pkts_size -= skb_src->len;
+		if (skb_src)
+			pra_list->total_pkts_size -= skb_src->len;
 
 		spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock,
 				       ra_list_flags);
@@ -373,7 +374,8 @@ mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv,
 			(adapter->pps_uapsd_mode) &&
 			(adapter->tx_lock_flag)) {
 				priv->adapter->tx_lock_flag = false;
-				ptx_pd->flags = 0;
+				if (ptx_pd)
+					ptx_pd->flags = 0;
 		}
 
 		skb_queue_tail(&pra_list->skb_head, skb_aggr);
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 0c0116374d7..19be8870c68 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1255,8 +1255,10 @@ int mwifiex_register_cfg80211(struct net_device *dev, u8 *mac,
 	wdev->wiphy =
 		wiphy_new(&mwifiex_cfg80211_ops,
 			  sizeof(struct mwifiex_private *));
-	if (!wdev->wiphy)
+	if (!wdev->wiphy) {
+		kfree(wdev);
 		return -ENOMEM;
+	}
 	wdev->iftype = NL80211_IFTYPE_STATION;
 	wdev->wiphy->max_scan_ssids = 10;
 	wdev->wiphy->interface_modes =
@@ -1296,6 +1298,7 @@ int mwifiex_register_cfg80211(struct net_device *dev, u8 *mac,
 		dev_err(priv->adapter->dev, "%s: registering cfg80211 device\n",
 						__func__);
 		wiphy_free(wdev->wiphy);
+		kfree(wdev);
 		return ret;
 	} else {
 		dev_dbg(priv->adapter->dev,
diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index b75cc9271a1..1c8b4f7cba4 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -292,7 +292,7 @@ int mwifiex_alloc_cmd_buffer(struct mwifiex_adapter *adapter)
 	if (!cmd_array) {
 		dev_err(adapter->dev, "%s: failed to alloc cmd_array\n",
 				__func__);
-		return -1;
+		return -ENOMEM;
 	}
 
 	adapter->cmd_pool = cmd_array;
diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c
index 27ad72b291b..6a8fd9989a2 100644
--- a/drivers/net/wireless/mwifiex/init.c
+++ b/drivers/net/wireless/mwifiex/init.c
@@ -41,7 +41,7 @@ static int mwifiex_add_bss_prio_tbl(struct mwifiex_private *priv)
 	if (!bss_prio) {
 		dev_err(adapter->dev, "%s: failed to alloc bss_prio\n",
 						__func__);
-		return -1;
+		return -ENOMEM;
 	}
 
 	bss_prio->priv = priv;
@@ -161,7 +161,7 @@ static int mwifiex_allocate_adapter(struct mwifiex_adapter *adapter)
 	if (!temp_scan_table) {
 		dev_err(adapter->dev, "%s: failed to alloc temp_scan_table\n",
 		       __func__);
-		return -1;
+		return -ENOMEM;
 	}
 
 	adapter->scan_table = temp_scan_table;
diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index 38f912b8fce..44957cac61e 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -69,7 +69,7 @@ static int mwifiex_register(void *card, struct mwifiex_if_ops *if_ops,
 
 	adapter = kzalloc(sizeof(struct mwifiex_adapter), GFP_KERNEL);
 	if (!adapter)
-		return -1;
+		return -ENOMEM;
 
 	g_adapter = adapter;
 	adapter->card = card;
@@ -516,13 +516,13 @@ mwifiex_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 				jiffies, priv->bss_index);
 
 	if (priv->adapter->surprise_removed) {
-		kfree(skb);
+		kfree_skb(skb);
 		priv->stats.tx_dropped++;
 		return 0;
 	}
 	if (!skb->len || (skb->len > ETH_FRAME_LEN)) {
 		dev_err(priv->adapter->dev, "Tx: bad skb len %d\n", skb->len);
-		kfree(skb);
+		kfree_skb(skb);
 		priv->stats.tx_dropped++;
 		return 0;
 	}
@@ -535,7 +535,7 @@ mwifiex_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			skb_realloc_headroom(skb, MWIFIEX_MIN_DATA_HEADER_LEN);
 		if (unlikely(!new_skb)) {
 			dev_err(priv->adapter->dev, "Tx: cannot alloca new_skb\n");
-			kfree(skb);
+			kfree_skb(skb);
 			priv->stats.tx_dropped++;
 			return 0;
 		}
diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index 4968974f342..5c22860fb40 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -2283,7 +2283,7 @@ int mwifiex_scan_networks(struct mwifiex_private *priv,
 					GFP_KERNEL);
 	if (!scan_cfg_out) {
 		dev_err(adapter->dev, "failed to alloc scan_cfg_out\n");
-		return -1;
+		return -ENOMEM;
 	}
 
 	buf_size = sizeof(struct mwifiex_chan_scan_param_set) *
@@ -2292,7 +2292,7 @@ int mwifiex_scan_networks(struct mwifiex_private *priv,
 	if (!scan_chan_list) {
 		dev_err(adapter->dev, "failed to alloc scan_chan_list\n");
 		kfree(scan_cfg_out);
-		return -1;
+		return -ENOMEM;
 	}
 
 	keep_previous_scan = false;
@@ -2491,7 +2491,7 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
 				GFP_KERNEL);
 	if (!bss_new_entry) {
 		dev_err(adapter->dev, " failed to alloc bss_new_entry\n");
-		return -1;
+		return -ENOMEM;
 	}
 
 	for (idx = 0; idx < scan_rsp->number_of_sets && bytes_left; idx++) {
@@ -2881,7 +2881,7 @@ static int mwifiex_scan_specific_ssid(struct mwifiex_private *priv,
 	scan_cfg = kzalloc(sizeof(struct mwifiex_user_scan_cfg), GFP_KERNEL);
 	if (!scan_cfg) {
 		dev_err(adapter->dev, "failed to alloc scan_cfg\n");
-		return -1;
+		return -ENOMEM;
 	}
 
 	memcpy(scan_cfg->ssid_list[0].ssid, req_ssid->ssid,
diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index 470dbaaeaa0..d425dbd91d1 100644
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -68,6 +68,7 @@ mwifiex_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id)
 
 	if (ret) {
 		pr_err("%s: failed to enable function\n", __func__);
+		kfree(card);
 		return -EIO;
 	}
 
@@ -676,7 +677,7 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter,
 	if (!fwbuf) {
 		dev_err(adapter->dev, "unable to alloc buffer for firmware."
 				" Terminating download\n");
-		return -1;
+		return -ENOMEM;
 	}
 
 	/* Perform firmware data transfer */
@@ -1605,7 +1606,7 @@ static int mwifiex_init_sdio(struct mwifiex_adapter *adapter)
 	card->mp_regs = kzalloc(MAX_MP_REGS, GFP_KERNEL);
 	if (!card->mp_regs) {
 		dev_err(adapter->dev, "failed to alloc mp_regs\n");
-		return -1;
+		return -ENOMEM;
 	}
 
 	ret = mwifiex_alloc_sdio_mpa_buffers(adapter,
diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index 4585c1bb9fa..75bca56449c 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -895,7 +895,7 @@ int mwifiex_set_tx_power(struct mwifiex_private *priv,
 	if (!buf) {
 		dev_err(priv->adapter->dev, "%s: failed to alloc cmd buffer\n",
 				__func__);
-		return -1;
+		return -ENOMEM;
 	}
 
 	txp_cfg = (struct host_cmd_ds_txpwr_cfg *) buf;
-- 
cgit v1.2.3


From 5ee9c6afcb72eb41c3607e424c3b969f8c56031b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Mon, 9 May 2011 00:21:18 +0200
Subject: b43: trivial: include ssb word in ssb specific functions
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This can be helpful when we decide to add support for other buses.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 70838e82534..f7582c096f8 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4958,7 +4958,7 @@ out:
 	return err;
 }
 
-static int b43_probe(struct ssb_device *dev, const struct ssb_device_id *id)
+static int b43_ssb_probe(struct ssb_device *dev, const struct ssb_device_id *id)
 {
 	struct b43_wl *wl;
 	int err;
@@ -4996,7 +4996,7 @@ static int b43_probe(struct ssb_device *dev, const struct ssb_device_id *id)
 	return err;
 }
 
-static void b43_remove(struct ssb_device *dev)
+static void b43_ssb_remove(struct ssb_device *dev)
 {
 	struct b43_wl *wl = ssb_get_devtypedata(dev);
 	struct b43_wldev *wldev = ssb_get_drvdata(dev);
@@ -5039,8 +5039,8 @@ void b43_controller_restart(struct b43_wldev *dev, const char *reason)
 static struct ssb_driver b43_ssb_driver = {
 	.name		= KBUILD_MODNAME,
 	.id_table	= b43_ssb_tbl,
-	.probe		= b43_probe,
-	.remove		= b43_remove,
+	.probe		= b43_ssb_probe,
+	.remove		= b43_ssb_remove,
 };
 
 static void b43_print_driverinfo(void)
-- 
cgit v1.2.3


From 8c12c7b0efce09b87e67d05332bdcb86ea83f65a Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Date: Mon, 9 May 2011 10:29:01 +0530
Subject: ath9k_hw: remove get_channel_noise function

currently ath9k_hw_getchan_noise is not used anywhere

Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/calib.c | 8 --------
 drivers/net/wireless/ath/ath9k/calib.h | 1 -
 2 files changed, 9 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index fe3c10e6b27..558b228a717 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -409,14 +409,6 @@ void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah,
 	}
 }
 
-s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan)
-{
-	if (!ah->curchan || !ah->curchan->noisefloor)
-		return ath9k_hw_get_default_nf(ah, chan);
-
-	return ah->curchan->noisefloor;
-}
-EXPORT_SYMBOL(ath9k_hw_getchan_noise);
 
 void ath9k_hw_bstuck_nfcal(struct ath_hw *ah)
 {
diff --git a/drivers/net/wireless/ath/ath9k/calib.h b/drivers/net/wireless/ath/ath9k/calib.h
index b8973eb8d85..4420780fa3b 100644
--- a/drivers/net/wireless/ath/ath9k/calib.h
+++ b/drivers/net/wireless/ath/ath9k/calib.h
@@ -106,7 +106,6 @@ bool ath9k_hw_getnf(struct ath_hw *ah, struct ath9k_channel *chan);
 void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah,
 				  struct ath9k_channel *chan);
 void ath9k_hw_bstuck_nfcal(struct ath_hw *ah);
-s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan);
 void ath9k_hw_reset_calibration(struct ath_hw *ah,
 				struct ath9k_cal_list *currCal);
 
-- 
cgit v1.2.3


From 73f743670d36ddd61247d709711227b0e2e1a497 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 9 May 2011 12:51:57 -0700
Subject: rtlwifi: rtl8192cu: Fix memset/memcpy using sizeof(ptr) not
 sizeof(*ptr)

Found via coccinelle script

@@
type T;
T* ptr;
expression E1;
@@
* memset(E1, 0, sizeof(ptr));

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8192cu/trx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c
index 79c98f62175..3a92ba3c4a1 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c
@@ -372,7 +372,7 @@ static void _rtl_rx_process(struct ieee80211_hw *hw, struct sk_buff *skb)
 	__le16 fc;
 	struct ieee80211_hdr *hdr;
 
-	memset(rx_status, 0, sizeof(rx_status));
+	memset(rx_status, 0, sizeof(*rx_status));
 	rxdesc	= skb->data;
 	skb_len	= skb->len;
 	drvinfo_len = (GET_RX_DESC_DRVINFO_SIZE(rxdesc) * RTL_RX_DRV_INFO_UNIT);
@@ -434,7 +434,7 @@ static void _rtl_rx_process(struct ieee80211_hw *hw, struct sk_buff *skb)
 		 "0x%02X\n", fc, (u32)hdr->addr1[0], (u32)hdr->addr1[1],
 		 (u32)hdr->addr1[2], (u32)hdr->addr1[3], (u32)hdr->addr1[4],
 		 (u32)hdr->addr1[5]));
-	memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
+	memcpy(IEEE80211_SKB_RXCB(skb), rx_status, sizeof(*rx_status));
 	ieee80211_rx_irqsafe(hw, skb);
 }
 
-- 
cgit v1.2.3


From 165af96d56dce3bd0cd09567106f22215f80bb63 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanoharan@atheros.com>
Date: Mon, 9 May 2011 19:11:26 +0530
Subject: ath9k_hw: Corrected xpabiaslevel register settings for AR9340

Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index a9dd3a4b4af..070dc8b882b 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3442,17 +3442,15 @@ static void ar9003_hw_xpa_bias_level_apply(struct ath_hw *ah, bool is2ghz)
 {
 	int bias = ar9003_hw_xpa_bias_level_get(ah, is2ghz);
 
-	if (AR_SREV_9485(ah))
+	if (AR_SREV_9485(ah) || AR_SREV_9340(ah))
 		REG_RMW_FIELD(ah, AR_CH0_TOP2, AR_CH0_TOP2_XPABIASLVL, bias);
 	else {
 		REG_RMW_FIELD(ah, AR_CH0_TOP, AR_CH0_TOP_XPABIASLVL, bias);
-		if (!AR_SREV_9340(ah)) {
-			REG_RMW_FIELD(ah, AR_CH0_THERM,
-				      AR_CH0_THERM_XPABIASLVL_MSB,
-				      bias >> 2);
-			REG_RMW_FIELD(ah, AR_CH0_THERM,
-				      AR_CH0_THERM_XPASHORT2GND, 1);
-		}
+		REG_RMW_FIELD(ah, AR_CH0_THERM,
+				AR_CH0_THERM_XPABIASLVL_MSB,
+				bias >> 2);
+		REG_RMW_FIELD(ah, AR_CH0_THERM,
+				AR_CH0_THERM_XPASHORT2GND, 1);
 	}
 }
 
-- 
cgit v1.2.3


From 94333f59cba08a1f6513ecd7e2fc5b85c1949a98 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanoharan@atheros.com>
Date: Mon, 9 May 2011 19:11:27 +0530
Subject: ath9k_hw: Change DCU backoff thresh for AR9340

By changing DCU backoff threshold for AR9340 to 1, helps to
reduce rx overrurns seen while running bidirectional traffic.

Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/mac.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c
index 9cf7a7d0e11..bd6d2b9d736 100644
--- a/drivers/net/wireless/ath/ath9k/mac.c
+++ b/drivers/net/wireless/ath/ath9k/mac.c
@@ -430,8 +430,13 @@ bool ath9k_hw_resettxqueue(struct ath_hw *ah, u32 q)
 		  SM(qi->tqi_shretry, AR_D_RETRY_LIMIT_FR_SH));
 
 	REG_WRITE(ah, AR_QMISC(q), AR_Q_MISC_DCU_EARLY_TERM_REQ);
-	REG_WRITE(ah, AR_DMISC(q),
-		  AR_D_MISC_CW_BKOFF_EN | AR_D_MISC_FRAG_WAIT_EN | 0x2);
+
+	if (AR_SREV_9340(ah))
+		REG_WRITE(ah, AR_DMISC(q),
+			  AR_D_MISC_CW_BKOFF_EN | AR_D_MISC_FRAG_WAIT_EN | 0x1);
+	else
+		REG_WRITE(ah, AR_DMISC(q),
+			  AR_D_MISC_CW_BKOFF_EN | AR_D_MISC_FRAG_WAIT_EN | 0x2);
 
 	if (qi->tqi_cbrPeriod) {
 		REG_WRITE(ah, AR_QCBRCFG(q),
-- 
cgit v1.2.3


From 2b892a98db269b96ed097d560aaaa371907d20f5 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanoharan@atheros.com>
Date: Mon, 9 May 2011 19:11:28 +0530
Subject: ath9k: Fix rssi update in ad-hoc mode

The average beacon rssi which will be used by ani is not updated
in adhoc mode.

Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/recv.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index a485c040bf8..9fcd1e4f450 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -917,7 +917,8 @@ static void ath9k_process_rssi(struct ath_common *common,
 	int last_rssi;
 	__le16 fc;
 
-	if (ah->opmode != NL80211_IFTYPE_STATION)
+	if ((ah->opmode != NL80211_IFTYPE_STATION) &&
+	    (ah->opmode != NL80211_IFTYPE_ADHOC))
 		return;
 
 	fc = hdr->frame_control;
-- 
cgit v1.2.3


From 729da390034d04ff1b3a3f188dfb04a54f458e35 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanoharan@atheros.com>
Date: Mon, 9 May 2011 19:11:29 +0530
Subject: ath9k: Failed to set default beacon rssi in AP/IBSS mode

This beacon rssi will be used to set noisefloor during ani reset.

Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 11d9eca8fb6..c4d32c54224 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1409,6 +1409,7 @@ static void ath9k_calculate_summary_state(struct ieee80211_hw *hw,
 
 	/* Set up ANI */
 	if ((iter_data.naps + iter_data.nadhocs) > 0) {
+		sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER;
 		sc->sc_flags |= SC_OP_ANI_RUN;
 		ath_start_ani(common);
 	} else {
-- 
cgit v1.2.3


From 306fe9384f06d31219778cece2d3c646146e7bb6 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Mon, 9 May 2011 19:15:04 +0300
Subject: mac80211: don't drop frames where skb->len < 24 in
 ieee80211_scan_rx()

This seems to be a leftover from the old days, when we didn't support
any frames that didn't contain the full ieee802.11 header.  This is
not the case anymore.  It does not cause problems now, because they
are only dropped during scan.  But when scheduled scans get merged,
this would become a problem because we would drop all small frames
while scheduled scan is running.

To fix this, return RX_CONTINUE instead of RX_DROP_MONITOR.

Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/scan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 489b6ad200d..8acce724f0d 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -170,7 +170,7 @@ ieee80211_scan_rx(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb)
 		return RX_CONTINUE;
 
 	if (skb->len < 24)
-		return RX_DROP_MONITOR;
+		return RX_CONTINUE;
 
 	presp = ieee80211_is_probe_resp(fc);
 	if (presp) {
-- 
cgit v1.2.3


From 8369ae33b705222aa05ab53c7d6b4458f4ed161b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Mon, 9 May 2011 18:56:46 +0200
Subject: bcma: add Broadcom specific AMBA bus driver
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Broadcom has released cards based on a new AMBA-based bus type. From a
programming point of view, this new bus type differs from AMBA and does
not use AMBA common registers. It also differs enough from SSB. We
decided that a new bus driver is needed to keep the code clean.

In its current form, the driver detects devices present on the bus and
registers them in the system. It allows registering BCMA drivers for
specified bus devices and provides them basic operations. The bus driver
itself includes two important bus managing drivers: ChipCommon core
driver and PCI(c) core driver. They are early used to allow correct
initialization.

Currently code is limited to supporting buses on PCI(e) devices, however
the driver is designed to be used also on other hosts. The host
abstraction layer is implemented and already used for PCI(e).

Support for PCI(e) hosts is working and seems to be stable (access to
80211 core was tested successfully on a few devices). We can still
optimize it by using some fixed windows, but this can be done later
without affecting any external code. Windows are just ranges in MMIO
used for accessing cores on the bus.

Cc: Greg KH <greg@kroah.com>
Cc: Michael Büsch <mb@bu3sch.de>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: George Kashperko <george@znau.edu.ua>
Cc: Arend van Spriel <arend@broadcom.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Botting <andy@andybotting.com>
Cc: linuxdriverproject <devel@linuxdriverproject.org>
Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 Documentation/ABI/testing/sysfs-bus-bcma    |  31 +++
 MAINTAINERS                                 |   7 +
 drivers/Kconfig                             |   2 +
 drivers/Makefile                            |   1 +
 drivers/bcma/Kconfig                        |  33 +++
 drivers/bcma/Makefile                       |   7 +
 drivers/bcma/README                         |  19 ++
 drivers/bcma/TODO                           |   3 +
 drivers/bcma/bcma_private.h                 |  28 +++
 drivers/bcma/core.c                         |  51 ++++
 drivers/bcma/driver_chipcommon.c            |  87 +++++++
 drivers/bcma/driver_chipcommon_pmu.c        | 134 +++++++++++
 drivers/bcma/driver_pci.c                   | 163 +++++++++++++
 drivers/bcma/host_pci.c                     | 196 +++++++++++++++
 drivers/bcma/main.c                         | 247 +++++++++++++++++++
 drivers/bcma/scan.c                         | 360 ++++++++++++++++++++++++++++
 drivers/bcma/scan.h                         |  56 +++++
 include/linux/bcma/bcma.h                   | 224 +++++++++++++++++
 include/linux/bcma/bcma_driver_chipcommon.h | 297 +++++++++++++++++++++++
 include/linux/bcma/bcma_driver_pci.h        |  89 +++++++
 include/linux/bcma/bcma_regs.h              |  34 +++
 include/linux/mod_devicetable.h             |  17 ++
 scripts/mod/file2alias.c                    |  22 ++
 23 files changed, 2108 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-bcma
 create mode 100644 drivers/bcma/Kconfig
 create mode 100644 drivers/bcma/Makefile
 create mode 100644 drivers/bcma/README
 create mode 100644 drivers/bcma/TODO
 create mode 100644 drivers/bcma/bcma_private.h
 create mode 100644 drivers/bcma/core.c
 create mode 100644 drivers/bcma/driver_chipcommon.c
 create mode 100644 drivers/bcma/driver_chipcommon_pmu.c
 create mode 100644 drivers/bcma/driver_pci.c
 create mode 100644 drivers/bcma/host_pci.c
 create mode 100644 drivers/bcma/main.c
 create mode 100644 drivers/bcma/scan.c
 create mode 100644 drivers/bcma/scan.h
 create mode 100644 include/linux/bcma/bcma.h
 create mode 100644 include/linux/bcma/bcma_driver_chipcommon.h
 create mode 100644 include/linux/bcma/bcma_driver_pci.h
 create mode 100644 include/linux/bcma/bcma_regs.h

diff --git a/Documentation/ABI/testing/sysfs-bus-bcma b/Documentation/ABI/testing/sysfs-bus-bcma
new file mode 100644
index 00000000000..06b62badddd
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-bcma
@@ -0,0 +1,31 @@
+What:		/sys/bus/bcma/devices/.../manuf
+Date:		May 2011
+KernelVersion:	2.6.40
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		Each BCMA core has it's manufacturer id. See
+		include/linux/bcma/bcma.h for possible values.
+
+What:		/sys/bus/bcma/devices/.../id
+Date:		May 2011
+KernelVersion:	2.6.40
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		There are a few types of BCMA cores, they can be identified by
+		id field.
+
+What:		/sys/bus/bcma/devices/.../rev
+Date:		May 2011
+KernelVersion:	2.6.40
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		BCMA cores of the same type can still slightly differ depending
+		on their revision. Use it for detailed programming.
+
+What:		/sys/bus/bcma/devices/.../class
+Date:		May 2011
+KernelVersion:	2.6.40
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		Each BCMA core is identified by few fields, including class it
+		belongs to. See include/linux/bcma/bcma.h for possible values.
diff --git a/MAINTAINERS b/MAINTAINERS
index 9f9104987a7..df5585819a6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5810,6 +5810,13 @@ S:	Maintained
 F:	drivers/ssb/
 F:	include/linux/ssb/
 
+BROADCOM SPECIFIC AMBA DRIVER (BCMA)
+M:	Rafał Miłecki <zajec5@gmail.com>
+L:	linux-wireless@vger.kernel.org
+S:	Maintained
+F:	drivers/bcma/
+F:	include/linux/bcma/
+
 SONY VAIO CONTROL DEVICE DRIVER
 M:	Mattia Dongili <malattia@linux.it>
 L:	platform-driver-x86@vger.kernel.org
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 177c7d15693..aca70675146 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -68,6 +68,8 @@ source "drivers/watchdog/Kconfig"
 
 source "drivers/ssb/Kconfig"
 
+source "drivers/bcma/Kconfig"
+
 source "drivers/mfd/Kconfig"
 
 source "drivers/regulator/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 3f135b6fb01..a29527f4ded 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -110,6 +110,7 @@ obj-$(CONFIG_HID)		+= hid/
 obj-$(CONFIG_PPC_PS3)		+= ps3/
 obj-$(CONFIG_OF)		+= of/
 obj-$(CONFIG_SSB)		+= ssb/
+obj-$(CONFIG_BCMA)		+= bcma/
 obj-$(CONFIG_VHOST_NET)		+= vhost/
 obj-$(CONFIG_VLYNQ)		+= vlynq/
 obj-$(CONFIG_STAGING)		+= staging/
diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig
new file mode 100644
index 00000000000..353781b5b78
--- /dev/null
+++ b/drivers/bcma/Kconfig
@@ -0,0 +1,33 @@
+config BCMA_POSSIBLE
+	bool
+	depends on HAS_IOMEM && HAS_DMA
+	default y
+
+menu "Broadcom specific AMBA"
+	depends on BCMA_POSSIBLE
+
+config BCMA
+	tristate "BCMA support"
+	depends on BCMA_POSSIBLE
+	help
+	  Bus driver for Broadcom specific Advanced Microcontroller Bus
+	  Architecture.
+
+config BCMA_HOST_PCI_POSSIBLE
+	bool
+	depends on BCMA && PCI = y
+	default y
+
+config BCMA_HOST_PCI
+	bool "Support for BCMA on PCI-host bus"
+	depends on BCMA_HOST_PCI_POSSIBLE
+
+config BCMA_DEBUG
+	bool "BCMA debugging"
+	depends on BCMA
+	help
+	  This turns on additional debugging messages.
+
+	  If unsure, say N
+
+endmenu
diff --git a/drivers/bcma/Makefile b/drivers/bcma/Makefile
new file mode 100644
index 00000000000..0d56245bcb7
--- /dev/null
+++ b/drivers/bcma/Makefile
@@ -0,0 +1,7 @@
+bcma-y					+= main.o scan.o core.o
+bcma-y					+= driver_chipcommon.o driver_chipcommon_pmu.o
+bcma-y					+= driver_pci.o
+bcma-$(CONFIG_BCMA_HOST_PCI)		+= host_pci.o
+obj-$(CONFIG_BCMA)			+= bcma.o
+
+ccflags-$(CONFIG_BCMA_DEBUG)		:= -DDEBUG
diff --git a/drivers/bcma/README b/drivers/bcma/README
new file mode 100644
index 00000000000..f7e7ce46c60
--- /dev/null
+++ b/drivers/bcma/README
@@ -0,0 +1,19 @@
+Broadcom introduced new bus as replacement for older SSB. It is based on AMBA,
+however from programming point of view there is nothing AMBA specific we use.
+
+Standard AMBA drivers are platform specific, have hardcoded addresses and use
+AMBA standard fields like CID and PID.
+
+In case of Broadcom's cards every device consists of:
+1) Broadcom specific AMBA device. It is put on AMBA bus, but can not be treated
+   as standard AMBA device. Reading it's CID or PID can cause machine lockup.
+2) AMBA standard devices called ports or wrappers. They have CIDs (AMBA_CID)
+   and PIDs (0x103BB369), but we do not use that info for anything. One of that
+   devices is used for managing Broadcom specific core.
+
+Addresses of AMBA devices are not hardcoded in driver and have to be read from
+EPROM.
+
+In this situation we decided to introduce separated bus. It can contain up to
+16 devices identified by Broadcom specific fields: manufacturer, id, revision
+and class.
diff --git a/drivers/bcma/TODO b/drivers/bcma/TODO
new file mode 100644
index 00000000000..da7aa99fe81
--- /dev/null
+++ b/drivers/bcma/TODO
@@ -0,0 +1,3 @@
+- Interrupts
+- Defines for PCI core driver
+- Create kernel Documentation (use info from README)
diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
new file mode 100644
index 00000000000..2f72e9c585f
--- /dev/null
+++ b/drivers/bcma/bcma_private.h
@@ -0,0 +1,28 @@
+#ifndef LINUX_BCMA_PRIVATE_H_
+#define LINUX_BCMA_PRIVATE_H_
+
+#ifndef pr_fmt
+#define pr_fmt(fmt)		KBUILD_MODNAME ": " fmt
+#endif
+
+#include <linux/bcma/bcma.h>
+#include <linux/delay.h>
+
+#define BCMA_CORE_SIZE		0x1000
+
+struct bcma_bus;
+
+/* main.c */
+extern int bcma_bus_register(struct bcma_bus *bus);
+extern void bcma_bus_unregister(struct bcma_bus *bus);
+
+/* scan.c */
+int bcma_bus_scan(struct bcma_bus *bus);
+
+#ifdef CONFIG_BCMA_HOST_PCI
+/* host_pci.c */
+extern int __init bcma_host_pci_init(void);
+extern void __exit bcma_host_pci_exit(void);
+#endif /* CONFIG_BCMA_HOST_PCI */
+
+#endif
diff --git a/drivers/bcma/core.c b/drivers/bcma/core.c
new file mode 100644
index 00000000000..ced379f7b37
--- /dev/null
+++ b/drivers/bcma/core.c
@@ -0,0 +1,51 @@
+/*
+ * Broadcom specific AMBA
+ * Core ops
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+bool bcma_core_is_enabled(struct bcma_device *core)
+{
+	if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC))
+	    != BCMA_IOCTL_CLK)
+		return false;
+	if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
+		return false;
+	return true;
+}
+EXPORT_SYMBOL_GPL(bcma_core_is_enabled);
+
+static void bcma_core_disable(struct bcma_device *core, u32 flags)
+{
+	if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
+		return;
+
+	bcma_awrite32(core, BCMA_IOCTL, flags);
+	bcma_aread32(core, BCMA_IOCTL);
+	udelay(10);
+
+	bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
+	udelay(1);
+}
+
+int bcma_core_enable(struct bcma_device *core, u32 flags)
+{
+	bcma_core_disable(core, flags);
+
+	bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC | flags));
+	bcma_aread32(core, BCMA_IOCTL);
+
+	bcma_awrite32(core, BCMA_RESET_CTL, 0);
+	udelay(1);
+
+	bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
+	bcma_aread32(core, BCMA_IOCTL);
+	udelay(1);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bcma_core_enable);
diff --git a/drivers/bcma/driver_chipcommon.c b/drivers/bcma/driver_chipcommon.c
new file mode 100644
index 00000000000..caf596091d4
--- /dev/null
+++ b/drivers/bcma/driver_chipcommon.c
@@ -0,0 +1,87 @@
+/*
+ * Broadcom specific AMBA
+ * ChipCommon core driver
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
+					 u32 mask, u32 value)
+{
+	value &= mask;
+	value |= bcma_cc_read32(cc, offset) & ~mask;
+	bcma_cc_write32(cc, offset, value);
+
+	return value;
+}
+
+void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
+{
+	if (cc->core->id.rev >= 11)
+		cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
+	cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP);
+	if (cc->core->id.rev >= 35)
+		cc->capabilities_ext = bcma_cc_read32(cc, BCMA_CC_CAP_EXT);
+
+	bcma_cc_write32(cc, 0x58, 0);
+	bcma_cc_write32(cc, 0x5C, 0);
+
+	if (cc->capabilities & BCMA_CC_CAP_PMU)
+		bcma_pmu_init(cc);
+	if (cc->capabilities & BCMA_CC_CAP_PCTL)
+		pr_err("Power control not implemented!\n");
+}
+
+/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
+void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks)
+{
+	/* instant NMI */
+	bcma_cc_write32(cc, BCMA_CC_WATCHDOG, ticks);
+}
+
+void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+	bcma_cc_write32_masked(cc, BCMA_CC_IRQMASK, mask, value);
+}
+
+u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask)
+{
+	return bcma_cc_read32(cc, BCMA_CC_IRQSTAT) & mask;
+}
+
+u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask)
+{
+	return bcma_cc_read32(cc, BCMA_CC_GPIOIN) & mask;
+}
+
+u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
+}
+
+u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
+}
+
+u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value);
+}
+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_control);
+
+u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
+}
+
+u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
+}
diff --git a/drivers/bcma/driver_chipcommon_pmu.c b/drivers/bcma/driver_chipcommon_pmu.c
new file mode 100644
index 00000000000..f44177a644c
--- /dev/null
+++ b/drivers/bcma/driver_chipcommon_pmu.c
@@ -0,0 +1,134 @@
+/*
+ * Broadcom specific AMBA
+ * ChipCommon Power Management Unit driver
+ *
+ * Copyright 2009, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2007, Broadcom Corporation
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
+					u32 offset, u32 mask, u32 set)
+{
+	u32 value;
+
+	bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR);
+	bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset);
+	bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR);
+	value = bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA);
+	value &= mask;
+	value |= set;
+	bcma_cc_write32(cc, BCMA_CC_CHIPCTL_DATA, value);
+	bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA);
+}
+
+static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
+{
+	struct bcma_bus *bus = cc->core->bus;
+
+	switch (bus->chipinfo.id) {
+	case 0x4313:
+	case 0x4331:
+	case 43224:
+	case 43225:
+		break;
+	default:
+		pr_err("PLL init unknown for device 0x%04X\n",
+			bus->chipinfo.id);
+	}
+}
+
+static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
+{
+	struct bcma_bus *bus = cc->core->bus;
+	u32 min_msk = 0, max_msk = 0;
+
+	switch (bus->chipinfo.id) {
+	case 0x4313:
+		min_msk = 0x200D;
+		max_msk = 0xFFFF;
+		break;
+	case 43224:
+		break;
+	default:
+		pr_err("PMU resource config unknown for device 0x%04X\n",
+			bus->chipinfo.id);
+	}
+
+	/* Set the resource masks. */
+	if (min_msk)
+		bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk);
+	if (max_msk)
+		bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);
+}
+
+void bcma_pmu_swreg_init(struct bcma_drv_cc *cc)
+{
+	struct bcma_bus *bus = cc->core->bus;
+
+	switch (bus->chipinfo.id) {
+	case 0x4313:
+	case 0x4331:
+	case 43224:
+		break;
+	default:
+		pr_err("PMU switch/regulators init unknown for device "
+			"0x%04X\n", bus->chipinfo.id);
+	}
+}
+
+void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
+{
+	struct bcma_bus *bus = cc->core->bus;
+
+	switch (bus->chipinfo.id) {
+	case 0x4313:
+		bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7);
+		break;
+	case 0x4331:
+		pr_err("Enabling Ext PA lines not implemented\n");
+		break;
+	case 43224:
+		if (bus->chipinfo.rev == 0) {
+			pr_err("Workarounds for 43224 rev 0 not fully "
+				"implemented\n");
+			bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0);
+		} else {
+			bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0);
+		}
+		break;
+	default:
+		pr_err("Workarounds unknown for device 0x%04X\n",
+			bus->chipinfo.id);
+	}
+}
+
+void bcma_pmu_init(struct bcma_drv_cc *cc)
+{
+	u32 pmucap;
+
+	pmucap = bcma_cc_read32(cc, BCMA_CC_PMU_CAP);
+	cc->pmu.rev = (pmucap & BCMA_CC_PMU_CAP_REVISION);
+
+	pr_debug("Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev,
+		 pmucap);
+
+	if (cc->pmu.rev == 1)
+		bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
+			      ~BCMA_CC_PMU_CTL_NOILPONW);
+	else
+		bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
+			     BCMA_CC_PMU_CTL_NOILPONW);
+
+	if (cc->core->id.id == 0x4329 && cc->core->id.rev == 2)
+		pr_err("Fix for 4329b0 bad LPOM state not implemented!\n");
+
+	bcma_pmu_pll_init(cc);
+	bcma_pmu_resources_init(cc);
+	bcma_pmu_swreg_init(cc);
+	bcma_pmu_workarounds(cc);
+}
diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
new file mode 100644
index 00000000000..b98b8359bef
--- /dev/null
+++ b/drivers/bcma/driver_pci.c
@@ -0,0 +1,163 @@
+/*
+ * Broadcom specific AMBA
+ * PCI Core
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+/**************************************************
+ * R/W ops.
+ **************************************************/
+
+static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address)
+{
+	pcicore_write32(pc, 0x130, address);
+	pcicore_read32(pc, 0x130);
+	return pcicore_read32(pc, 0x134);
+}
+
+#if 0
+static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data)
+{
+	pcicore_write32(pc, 0x130, address);
+	pcicore_read32(pc, 0x130);
+	pcicore_write32(pc, 0x134, data);
+}
+#endif
+
+static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy)
+{
+	const u16 mdio_control = 0x128;
+	const u16 mdio_data = 0x12C;
+	u32 v;
+	int i;
+
+	v = (1 << 30); /* Start of Transaction */
+	v |= (1 << 28); /* Write Transaction */
+	v |= (1 << 17); /* Turnaround */
+	v |= (0x1F << 18);
+	v |= (phy << 4);
+	pcicore_write32(pc, mdio_data, v);
+
+	udelay(10);
+	for (i = 0; i < 200; i++) {
+		v = pcicore_read32(pc, mdio_control);
+		if (v & 0x100 /* Trans complete */)
+			break;
+		msleep(1);
+	}
+}
+
+static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address)
+{
+	const u16 mdio_control = 0x128;
+	const u16 mdio_data = 0x12C;
+	int max_retries = 10;
+	u16 ret = 0;
+	u32 v;
+	int i;
+
+	v = 0x80; /* Enable Preamble Sequence */
+	v |= 0x2; /* MDIO Clock Divisor */
+	pcicore_write32(pc, mdio_control, v);
+
+	if (pc->core->id.rev >= 10) {
+		max_retries = 200;
+		bcma_pcie_mdio_set_phy(pc, device);
+	}
+
+	v = (1 << 30); /* Start of Transaction */
+	v |= (1 << 29); /* Read Transaction */
+	v |= (1 << 17); /* Turnaround */
+	if (pc->core->id.rev < 10)
+		v |= (u32)device << 22;
+	v |= (u32)address << 18;
+	pcicore_write32(pc, mdio_data, v);
+	/* Wait for the device to complete the transaction */
+	udelay(10);
+	for (i = 0; i < 200; i++) {
+		v = pcicore_read32(pc, mdio_control);
+		if (v & 0x100 /* Trans complete */) {
+			udelay(10);
+			ret = pcicore_read32(pc, mdio_data);
+			break;
+		}
+		msleep(1);
+	}
+	pcicore_write32(pc, mdio_control, 0);
+	return ret;
+}
+
+static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device,
+				u8 address, u16 data)
+{
+	const u16 mdio_control = 0x128;
+	const u16 mdio_data = 0x12C;
+	int max_retries = 10;
+	u32 v;
+	int i;
+
+	v = 0x80; /* Enable Preamble Sequence */
+	v |= 0x2; /* MDIO Clock Divisor */
+	pcicore_write32(pc, mdio_control, v);
+
+	if (pc->core->id.rev >= 10) {
+		max_retries = 200;
+		bcma_pcie_mdio_set_phy(pc, device);
+	}
+
+	v = (1 << 30); /* Start of Transaction */
+	v |= (1 << 28); /* Write Transaction */
+	v |= (1 << 17); /* Turnaround */
+	if (pc->core->id.rev < 10)
+		v |= (u32)device << 22;
+	v |= (u32)address << 18;
+	v |= data;
+	pcicore_write32(pc, mdio_data, v);
+	/* Wait for the device to complete the transaction */
+	udelay(10);
+	for (i = 0; i < max_retries; i++) {
+		v = pcicore_read32(pc, mdio_control);
+		if (v & 0x100 /* Trans complete */)
+			break;
+		msleep(1);
+	}
+	pcicore_write32(pc, mdio_control, 0);
+}
+
+/**************************************************
+ * Workarounds.
+ **************************************************/
+
+static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc)
+{
+	return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80;
+}
+
+static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc)
+{
+	const u8 serdes_pll_device = 0x1D;
+	const u8 serdes_rx_device = 0x1F;
+	u16 tmp;
+
+	bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */,
+			      bcma_pcicore_polarity_workaround(pc));
+	tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */);
+	if (tmp & 0x4000)
+		bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000);
+}
+
+/**************************************************
+ * Init.
+ **************************************************/
+
+void bcma_core_pci_init(struct bcma_drv_pci *pc)
+{
+	bcma_pcicore_serdes_workaround(pc);
+}
diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c
new file mode 100644
index 00000000000..99dd36e8500
--- /dev/null
+++ b/drivers/bcma/host_pci.c
@@ -0,0 +1,196 @@
+/*
+ * Broadcom specific AMBA
+ * PCI Host
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+#include <linux/pci.h>
+
+static void bcma_host_pci_switch_core(struct bcma_device *core)
+{
+	pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN,
+			       core->addr);
+	pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN2,
+			       core->wrap);
+	core->bus->mapped_core = core;
+	pr_debug("Switched to core: 0x%X\n", core->id.id);
+}
+
+static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset)
+{
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
+	return ioread8(core->bus->mmio + offset);
+}
+
+static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset)
+{
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
+	return ioread16(core->bus->mmio + offset);
+}
+
+static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset)
+{
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
+	return ioread32(core->bus->mmio + offset);
+}
+
+static void bcma_host_pci_write8(struct bcma_device *core, u16 offset,
+				 u8 value)
+{
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
+	iowrite8(value, core->bus->mmio + offset);
+}
+
+static void bcma_host_pci_write16(struct bcma_device *core, u16 offset,
+				 u16 value)
+{
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
+	iowrite16(value, core->bus->mmio + offset);
+}
+
+static void bcma_host_pci_write32(struct bcma_device *core, u16 offset,
+				 u32 value)
+{
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
+	iowrite32(value, core->bus->mmio + offset);
+}
+
+static u32 bcma_host_pci_aread32(struct bcma_device *core, u16 offset)
+{
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
+	return ioread32(core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset);
+}
+
+static void bcma_host_pci_awrite32(struct bcma_device *core, u16 offset,
+				  u32 value)
+{
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
+	iowrite32(value, core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset);
+}
+
+const struct bcma_host_ops bcma_host_pci_ops = {
+	.read8		= bcma_host_pci_read8,
+	.read16		= bcma_host_pci_read16,
+	.read32		= bcma_host_pci_read32,
+	.write8		= bcma_host_pci_write8,
+	.write16	= bcma_host_pci_write16,
+	.write32	= bcma_host_pci_write32,
+	.aread32	= bcma_host_pci_aread32,
+	.awrite32	= bcma_host_pci_awrite32,
+};
+
+static int bcma_host_pci_probe(struct pci_dev *dev,
+			     const struct pci_device_id *id)
+{
+	struct bcma_bus *bus;
+	int err = -ENOMEM;
+	const char *name;
+	u32 val;
+
+	/* Alloc */
+	bus = kzalloc(sizeof(*bus), GFP_KERNEL);
+	if (!bus)
+		goto out;
+
+	/* Basic PCI configuration */
+	err = pci_enable_device(dev);
+	if (err)
+		goto err_kfree_bus;
+
+	name = dev_name(&dev->dev);
+	if (dev->driver && dev->driver->name)
+		name = dev->driver->name;
+	err = pci_request_regions(dev, name);
+	if (err)
+		goto err_pci_disable;
+	pci_set_master(dev);
+
+	/* Disable the RETRY_TIMEOUT register (0x41) to keep
+	 * PCI Tx retries from interfering with C3 CPU state */
+	pci_read_config_dword(dev, 0x40, &val);
+	if ((val & 0x0000ff00) != 0)
+		pci_write_config_dword(dev, 0x40, val & 0xffff00ff);
+
+	/* SSB needed additional powering up, do we have any AMBA PCI cards? */
+	if (!pci_is_pcie(dev))
+		pr_err("PCI card detected, report problems.\n");
+
+	/* Map MMIO */
+	err = -ENOMEM;
+	bus->mmio = pci_iomap(dev, 0, ~0UL);
+	if (!bus->mmio)
+		goto err_pci_release_regions;
+
+	/* Host specific */
+	bus->host_pci = dev;
+	bus->hosttype = BCMA_HOSTTYPE_PCI;
+	bus->ops = &bcma_host_pci_ops;
+
+	/* Register */
+	err = bcma_bus_register(bus);
+	if (err)
+		goto err_pci_unmap_mmio;
+
+	pci_set_drvdata(dev, bus);
+
+out:
+	return err;
+
+err_pci_unmap_mmio:
+	pci_iounmap(dev, bus->mmio);
+err_pci_release_regions:
+	pci_release_regions(dev);
+err_pci_disable:
+	pci_disable_device(dev);
+err_kfree_bus:
+	kfree(bus);
+	return err;
+}
+
+static void bcma_host_pci_remove(struct pci_dev *dev)
+{
+	struct bcma_bus *bus = pci_get_drvdata(dev);
+
+	bcma_bus_unregister(bus);
+	pci_iounmap(dev, bus->mmio);
+	pci_release_regions(dev);
+	pci_disable_device(dev);
+	kfree(bus);
+	pci_set_drvdata(dev, NULL);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
+	{ 0, },
+};
+MODULE_DEVICE_TABLE(pci, bcma_pci_bridge_tbl);
+
+static struct pci_driver bcma_pci_bridge_driver = {
+	.name = "bcma-pci-bridge",
+	.id_table = bcma_pci_bridge_tbl,
+	.probe = bcma_host_pci_probe,
+	.remove = bcma_host_pci_remove,
+};
+
+int __init bcma_host_pci_init(void)
+{
+	return pci_register_driver(&bcma_pci_bridge_driver);
+}
+
+void __exit bcma_host_pci_exit(void)
+{
+	pci_unregister_driver(&bcma_pci_bridge_driver);
+}
diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
new file mode 100644
index 00000000000..be52344ed19
--- /dev/null
+++ b/drivers/bcma/main.c
@@ -0,0 +1,247 @@
+/*
+ * Broadcom specific AMBA
+ * Bus subsystem
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
+MODULE_LICENSE("GPL");
+
+static int bcma_bus_match(struct device *dev, struct device_driver *drv);
+static int bcma_device_probe(struct device *dev);
+static int bcma_device_remove(struct device *dev);
+
+static ssize_t manuf_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+	return sprintf(buf, "0x%03X\n", core->id.manuf);
+}
+static ssize_t id_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+	return sprintf(buf, "0x%03X\n", core->id.id);
+}
+static ssize_t rev_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+	return sprintf(buf, "0x%02X\n", core->id.rev);
+}
+static ssize_t class_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+	return sprintf(buf, "0x%X\n", core->id.class);
+}
+static struct device_attribute bcma_device_attrs[] = {
+	__ATTR_RO(manuf),
+	__ATTR_RO(id),
+	__ATTR_RO(rev),
+	__ATTR_RO(class),
+	__ATTR_NULL,
+};
+
+static struct bus_type bcma_bus_type = {
+	.name		= "bcma",
+	.match		= bcma_bus_match,
+	.probe		= bcma_device_probe,
+	.remove		= bcma_device_remove,
+	.dev_attrs	= bcma_device_attrs,
+};
+
+static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid)
+{
+	struct bcma_device *core;
+
+	list_for_each_entry(core, &bus->cores, list) {
+		if (core->id.id == coreid)
+			return core;
+	}
+	return NULL;
+}
+
+static void bcma_release_core_dev(struct device *dev)
+{
+	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+	kfree(core);
+}
+
+static int bcma_register_cores(struct bcma_bus *bus)
+{
+	struct bcma_device *core;
+	int err, dev_id = 0;
+
+	list_for_each_entry(core, &bus->cores, list) {
+		/* We support that cores ourself */
+		switch (core->id.id) {
+		case BCMA_CORE_CHIPCOMMON:
+		case BCMA_CORE_PCI:
+		case BCMA_CORE_PCIE:
+			continue;
+		}
+
+		core->dev.release = bcma_release_core_dev;
+		core->dev.bus = &bcma_bus_type;
+		dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id);
+
+		switch (bus->hosttype) {
+		case BCMA_HOSTTYPE_PCI:
+			core->dev.parent = &bus->host_pci->dev;
+			break;
+		case BCMA_HOSTTYPE_NONE:
+		case BCMA_HOSTTYPE_SDIO:
+			break;
+		}
+
+		err = device_register(&core->dev);
+		if (err) {
+			pr_err("Could not register dev for core 0x%03X\n",
+			       core->id.id);
+			continue;
+		}
+		core->dev_registered = true;
+		dev_id++;
+	}
+
+	return 0;
+}
+
+static void bcma_unregister_cores(struct bcma_bus *bus)
+{
+	struct bcma_device *core;
+
+	list_for_each_entry(core, &bus->cores, list) {
+		if (core->dev_registered)
+			device_unregister(&core->dev);
+	}
+}
+
+int bcma_bus_register(struct bcma_bus *bus)
+{
+	int err;
+	struct bcma_device *core;
+
+	/* Scan for devices (cores) */
+	err = bcma_bus_scan(bus);
+	if (err) {
+		pr_err("Failed to scan: %d\n", err);
+		return -1;
+	}
+
+	/* Init CC core */
+	core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
+	if (core) {
+		bus->drv_cc.core = core;
+		bcma_core_chipcommon_init(&bus->drv_cc);
+	}
+
+	/* Init PCIE core */
+	core = bcma_find_core(bus, BCMA_CORE_PCIE);
+	if (core) {
+		bus->drv_pci.core = core;
+		bcma_core_pci_init(&bus->drv_pci);
+	}
+
+	/* Register found cores */
+	bcma_register_cores(bus);
+
+	pr_info("Bus registered\n");
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bcma_bus_register);
+
+void bcma_bus_unregister(struct bcma_bus *bus)
+{
+	bcma_unregister_cores(bus);
+}
+EXPORT_SYMBOL_GPL(bcma_bus_unregister);
+
+int __bcma_driver_register(struct bcma_driver *drv, struct module *owner)
+{
+	drv->drv.name = drv->name;
+	drv->drv.bus = &bcma_bus_type;
+	drv->drv.owner = owner;
+
+	return driver_register(&drv->drv);
+}
+EXPORT_SYMBOL_GPL(__bcma_driver_register);
+
+void bcma_driver_unregister(struct bcma_driver *drv)
+{
+	driver_unregister(&drv->drv);
+}
+EXPORT_SYMBOL_GPL(bcma_driver_unregister);
+
+static int bcma_bus_match(struct device *dev, struct device_driver *drv)
+{
+	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+	struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv);
+	const struct bcma_device_id *cid = &core->id;
+	const struct bcma_device_id *did;
+
+	for (did = adrv->id_table; did->manuf || did->id || did->rev; did++) {
+	    if ((did->manuf == cid->manuf || did->manuf == BCMA_ANY_MANUF) &&
+		(did->id == cid->id || did->id == BCMA_ANY_ID) &&
+		(did->rev == cid->rev || did->rev == BCMA_ANY_REV) &&
+		(did->class == cid->class || did->class == BCMA_ANY_CLASS))
+			return 1;
+	}
+	return 0;
+}
+
+static int bcma_device_probe(struct device *dev)
+{
+	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+	struct bcma_driver *adrv = container_of(dev->driver, struct bcma_driver,
+					       drv);
+	int err = 0;
+
+	if (adrv->probe)
+		err = adrv->probe(core);
+
+	return err;
+}
+
+static int bcma_device_remove(struct device *dev)
+{
+	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+	struct bcma_driver *adrv = container_of(dev->driver, struct bcma_driver,
+					       drv);
+
+	if (adrv->remove)
+		adrv->remove(core);
+
+	return 0;
+}
+
+static int __init bcma_modinit(void)
+{
+	int err;
+
+	err = bus_register(&bcma_bus_type);
+	if (err)
+		return err;
+
+#ifdef CONFIG_BCMA_HOST_PCI
+	err = bcma_host_pci_init();
+	if (err) {
+		pr_err("PCI host initialization failed\n");
+		err = 0;
+	}
+#endif
+
+	return err;
+}
+fs_initcall(bcma_modinit);
+
+static void __exit bcma_modexit(void)
+{
+#ifdef CONFIG_BCMA_HOST_PCI
+	bcma_host_pci_exit();
+#endif
+	bus_unregister(&bcma_bus_type);
+}
+module_exit(bcma_modexit)
diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c
new file mode 100644
index 00000000000..40d7dcce893
--- /dev/null
+++ b/drivers/bcma/scan.c
@@ -0,0 +1,360 @@
+/*
+ * Broadcom specific AMBA
+ * Bus scanning
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "scan.h"
+#include "bcma_private.h"
+
+#include <linux/bcma/bcma.h>
+#include <linux/bcma/bcma_regs.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+
+struct bcma_device_id_name {
+	u16 id;
+	const char *name;
+};
+struct bcma_device_id_name bcma_device_names[] = {
+	{ BCMA_CORE_OOB_ROUTER, "OOB Router" },
+	{ BCMA_CORE_INVALID, "Invalid" },
+	{ BCMA_CORE_CHIPCOMMON, "ChipCommon" },
+	{ BCMA_CORE_ILINE20, "ILine 20" },
+	{ BCMA_CORE_SRAM, "SRAM" },
+	{ BCMA_CORE_SDRAM, "SDRAM" },
+	{ BCMA_CORE_PCI, "PCI" },
+	{ BCMA_CORE_MIPS, "MIPS" },
+	{ BCMA_CORE_ETHERNET, "Fast Ethernet" },
+	{ BCMA_CORE_V90, "V90" },
+	{ BCMA_CORE_USB11_HOSTDEV, "USB 1.1 Hostdev" },
+	{ BCMA_CORE_ADSL, "ADSL" },
+	{ BCMA_CORE_ILINE100, "ILine 100" },
+	{ BCMA_CORE_IPSEC, "IPSEC" },
+	{ BCMA_CORE_UTOPIA, "UTOPIA" },
+	{ BCMA_CORE_PCMCIA, "PCMCIA" },
+	{ BCMA_CORE_INTERNAL_MEM, "Internal Memory" },
+	{ BCMA_CORE_MEMC_SDRAM, "MEMC SDRAM" },
+	{ BCMA_CORE_OFDM, "OFDM" },
+	{ BCMA_CORE_EXTIF, "EXTIF" },
+	{ BCMA_CORE_80211, "IEEE 802.11" },
+	{ BCMA_CORE_PHY_A, "PHY A" },
+	{ BCMA_CORE_PHY_B, "PHY B" },
+	{ BCMA_CORE_PHY_G, "PHY G" },
+	{ BCMA_CORE_MIPS_3302, "MIPS 3302" },
+	{ BCMA_CORE_USB11_HOST, "USB 1.1 Host" },
+	{ BCMA_CORE_USB11_DEV, "USB 1.1 Device" },
+	{ BCMA_CORE_USB20_HOST, "USB 2.0 Host" },
+	{ BCMA_CORE_USB20_DEV, "USB 2.0 Device" },
+	{ BCMA_CORE_SDIO_HOST, "SDIO Host" },
+	{ BCMA_CORE_ROBOSWITCH, "Roboswitch" },
+	{ BCMA_CORE_PARA_ATA, "PATA" },
+	{ BCMA_CORE_SATA_XORDMA, "SATA XOR-DMA" },
+	{ BCMA_CORE_ETHERNET_GBIT, "GBit Ethernet" },
+	{ BCMA_CORE_PCIE, "PCIe" },
+	{ BCMA_CORE_PHY_N, "PHY N" },
+	{ BCMA_CORE_SRAM_CTL, "SRAM Controller" },
+	{ BCMA_CORE_MINI_MACPHY, "Mini MACPHY" },
+	{ BCMA_CORE_ARM_1176, "ARM 1176" },
+	{ BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" },
+	{ BCMA_CORE_PHY_LP, "PHY LP" },
+	{ BCMA_CORE_PMU, "PMU" },
+	{ BCMA_CORE_PHY_SSN, "PHY SSN" },
+	{ BCMA_CORE_SDIO_DEV, "SDIO Device" },
+	{ BCMA_CORE_ARM_CM3, "ARM CM3" },
+	{ BCMA_CORE_PHY_HT, "PHY HT" },
+	{ BCMA_CORE_MIPS_74K, "MIPS 74K" },
+	{ BCMA_CORE_MAC_GBIT, "GBit MAC" },
+	{ BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" },
+	{ BCMA_CORE_PCIE_RC, "PCIe Root Complex" },
+	{ BCMA_CORE_OCP_OCP_BRIDGE, "OCP to OCP Bridge" },
+	{ BCMA_CORE_SHARED_COMMON, "Common Shared" },
+	{ BCMA_CORE_OCP_AHB_BRIDGE, "OCP to AHB Bridge" },
+	{ BCMA_CORE_SPI_HOST, "SPI Host" },
+	{ BCMA_CORE_I2S, "I2S" },
+	{ BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" },
+	{ BCMA_CORE_SHIM, "SHIM" },
+	{ BCMA_CORE_DEFAULT, "Default" },
+};
+const char *bcma_device_name(struct bcma_device_id *id)
+{
+	int i;
+
+	if (id->manuf == BCMA_MANUF_BCM) {
+		for (i = 0; i < ARRAY_SIZE(bcma_device_names); i++) {
+			if (bcma_device_names[i].id == id->id)
+				return bcma_device_names[i].name;
+		}
+	}
+	return "UNKNOWN";
+}
+
+static u32 bcma_scan_read32(struct bcma_bus *bus, u8 current_coreidx,
+		       u16 offset)
+{
+	return readl(bus->mmio + offset);
+}
+
+static void bcma_scan_switch_core(struct bcma_bus *bus, u32 addr)
+{
+	if (bus->hosttype == BCMA_HOSTTYPE_PCI)
+		pci_write_config_dword(bus->host_pci, BCMA_PCI_BAR0_WIN,
+				       addr);
+}
+
+static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 **eromptr)
+{
+	u32 ent = readl(*eromptr);
+	(*eromptr)++;
+	return ent;
+}
+
+static void bcma_erom_push_ent(u32 **eromptr)
+{
+	(*eromptr)--;
+}
+
+static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 **eromptr)
+{
+	u32 ent = bcma_erom_get_ent(bus, eromptr);
+	if (!(ent & SCAN_ER_VALID))
+		return -ENOENT;
+	if ((ent & SCAN_ER_TAG) != SCAN_ER_TAG_CI)
+		return -ENOENT;
+	return ent;
+}
+
+static bool bcma_erom_is_end(struct bcma_bus *bus, u32 **eromptr)
+{
+	u32 ent = bcma_erom_get_ent(bus, eromptr);
+	bcma_erom_push_ent(eromptr);
+	return (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID));
+}
+
+static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 **eromptr)
+{
+	u32 ent = bcma_erom_get_ent(bus, eromptr);
+	bcma_erom_push_ent(eromptr);
+	return (((ent & SCAN_ER_VALID)) &&
+		((ent & SCAN_ER_TAGX) == SCAN_ER_TAG_ADDR) &&
+		((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE));
+}
+
+static void bcma_erom_skip_component(struct bcma_bus *bus, u32 **eromptr)
+{
+	u32 ent;
+	while (1) {
+		ent = bcma_erom_get_ent(bus, eromptr);
+		if ((ent & SCAN_ER_VALID) &&
+		    ((ent & SCAN_ER_TAG) == SCAN_ER_TAG_CI))
+			break;
+		if (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID))
+			break;
+	}
+	bcma_erom_push_ent(eromptr);
+}
+
+static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 **eromptr)
+{
+	u32 ent = bcma_erom_get_ent(bus, eromptr);
+	if (!(ent & SCAN_ER_VALID))
+		return -ENOENT;
+	if ((ent & SCAN_ER_TAG) != SCAN_ER_TAG_MP)
+		return -ENOENT;
+	return ent;
+}
+
+static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr,
+				  u32 type, u8 port)
+{
+	u32 addrl, addrh, sizel, sizeh = 0;
+	u32 size;
+
+	u32 ent = bcma_erom_get_ent(bus, eromptr);
+	if ((!(ent & SCAN_ER_VALID)) ||
+	    ((ent & SCAN_ER_TAGX) != SCAN_ER_TAG_ADDR) ||
+	    ((ent & SCAN_ADDR_TYPE) != type) ||
+	    (((ent & SCAN_ADDR_PORT) >> SCAN_ADDR_PORT_SHIFT) != port)) {
+		bcma_erom_push_ent(eromptr);
+		return -EINVAL;
+	}
+
+	addrl = ent & SCAN_ADDR_ADDR;
+	if (ent & SCAN_ADDR_AG32)
+		addrh = bcma_erom_get_ent(bus, eromptr);
+	else
+		addrh = 0;
+
+	if ((ent & SCAN_ADDR_SZ) == SCAN_ADDR_SZ_SZD) {
+		size = bcma_erom_get_ent(bus, eromptr);
+		sizel = size & SCAN_SIZE_SZ;
+		if (size & SCAN_SIZE_SG32)
+			sizeh = bcma_erom_get_ent(bus, eromptr);
+	} else
+		sizel = SCAN_ADDR_SZ_BASE <<
+				((ent & SCAN_ADDR_SZ) >> SCAN_ADDR_SZ_SHIFT);
+
+	return addrl;
+}
+
+int bcma_bus_scan(struct bcma_bus *bus)
+{
+	u32 erombase;
+	u32 __iomem *eromptr, *eromend;
+
+	s32 cia, cib;
+	u8 ports[2], wrappers[2];
+
+	s32 tmp;
+	u8 i, j;
+
+	int err;
+
+	INIT_LIST_HEAD(&bus->cores);
+	bus->nr_cores = 0;
+
+	bcma_scan_switch_core(bus, BCMA_ADDR_BASE);
+
+	tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID);
+	bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT;
+	bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT;
+	bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT;
+
+	erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
+	eromptr = bus->mmio;
+	eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
+
+	bcma_scan_switch_core(bus, erombase);
+
+	while (eromptr < eromend) {
+		struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL);
+		if (!core)
+			return -ENOMEM;
+		INIT_LIST_HEAD(&core->list);
+		core->bus = bus;
+
+		/* get CIs */
+		cia = bcma_erom_get_ci(bus, &eromptr);
+		if (cia < 0) {
+			bcma_erom_push_ent(&eromptr);
+			if (bcma_erom_is_end(bus, &eromptr))
+				break;
+			err= -EILSEQ;
+			goto out;
+		}
+		cib = bcma_erom_get_ci(bus, &eromptr);
+		if (cib < 0) {
+			err= -EILSEQ;
+			goto out;
+		}
+
+		/* parse CIs */
+		core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT;
+		core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT;
+		core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT;
+		ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT;
+		ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT;
+		wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT;
+		wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT;
+		core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT;
+
+		if (((core->id.manuf == BCMA_MANUF_ARM) &&
+		     (core->id.id == 0xFFF)) ||
+		    (ports[1] == 0)) {
+			bcma_erom_skip_component(bus, &eromptr);
+			continue;
+		}
+
+		/* check if component is a core at all */
+		if (wrappers[0] + wrappers[1] == 0) {
+			/* we could save addrl of the router
+			if (cid == BCMA_CORE_OOB_ROUTER)
+			 */
+			bcma_erom_skip_component(bus, &eromptr);
+			continue;
+		}
+
+		if (bcma_erom_is_bridge(bus, &eromptr)) {
+			bcma_erom_skip_component(bus, &eromptr);
+			continue;
+		}
+
+		/* get & parse master ports */
+		for (i = 0; i < ports[0]; i++) {
+			u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr);
+			if (mst_port_d < 0) {
+				err= -EILSEQ;
+				goto out;
+			}
+		}
+
+		/* get & parse slave ports */
+		for (i = 0; i < ports[1]; i++) {
+			for (j = 0; ; j++) {
+				tmp = bcma_erom_get_addr_desc(bus, &eromptr,
+					SCAN_ADDR_TYPE_SLAVE, i);
+				if (tmp < 0) {
+					/* no more entries for port _i_ */
+					/* pr_debug("erom: slave port %d "
+					 * "has %d descriptors\n", i, j); */
+					break;
+				} else {
+					if (i == 0 && j == 0)
+						core->addr = tmp;
+				}
+			}
+		}
+
+		/* get & parse master wrappers */
+		for (i = 0; i < wrappers[0]; i++) {
+			for (j = 0; ; j++) {
+				tmp = bcma_erom_get_addr_desc(bus, &eromptr,
+					SCAN_ADDR_TYPE_MWRAP, i);
+				if (tmp < 0) {
+					/* no more entries for port _i_ */
+					/* pr_debug("erom: master wrapper %d "
+					 * "has %d descriptors\n", i, j); */
+					break;
+				} else {
+					if (i == 0 && j == 0)
+						core->wrap = tmp;
+				}
+			}
+		}
+
+		/* get & parse slave wrappers */
+		for (i = 0; i < wrappers[1]; i++) {
+			u8 hack = (ports[1] == 1) ? 0 : 1;
+			for (j = 0; ; j++) {
+				tmp = bcma_erom_get_addr_desc(bus, &eromptr,
+					SCAN_ADDR_TYPE_SWRAP, i + hack);
+				if (tmp < 0) {
+					/* no more entries for port _i_ */
+					/* pr_debug("erom: master wrapper %d "
+					 * has %d descriptors\n", i, j); */
+					break;
+				} else {
+					if (wrappers[0] == 0 && !i && !j)
+						core->wrap = tmp;
+				}
+			}
+		}
+
+		pr_info("Core %d found: %s "
+			"(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+			bus->nr_cores, bcma_device_name(&core->id),
+			core->id.manuf, core->id.id, core->id.rev,
+			core->id.class);
+
+		core->core_index = bus->nr_cores++;
+		list_add(&core->list, &bus->cores);
+		continue;
+out:
+		return err;
+	}
+
+	return 0;
+}
diff --git a/drivers/bcma/scan.h b/drivers/bcma/scan.h
new file mode 100644
index 00000000000..113e6a66884
--- /dev/null
+++ b/drivers/bcma/scan.h
@@ -0,0 +1,56 @@
+#ifndef BCMA_SCAN_H_
+#define BCMA_SCAN_H_
+
+#define BCMA_ADDR_BASE		0x18000000
+#define BCMA_WRAP_BASE		0x18100000
+
+#define SCAN_ER_VALID		0x00000001
+#define SCAN_ER_TAGX		0x00000006 /* we have to ignore 0x8 bit when checking tag for SCAN_ER_TAG_ADDR */
+#define SCAN_ER_TAG		0x0000000E
+#define  SCAN_ER_TAG_CI		0x00000000
+#define  SCAN_ER_TAG_MP		0x00000002
+#define  SCAN_ER_TAG_ADDR	0x00000004
+#define  SCAN_ER_TAG_END	0x0000000E
+#define SCAN_ER_BAD		0xFFFFFFFF
+
+#define SCAN_CIA_CLASS		0x000000F0
+#define SCAN_CIA_CLASS_SHIFT	4
+#define SCAN_CIA_ID		0x000FFF00
+#define SCAN_CIA_ID_SHIFT	8
+#define SCAN_CIA_MANUF		0xFFF00000
+#define SCAN_CIA_MANUF_SHIFT	20
+
+#define SCAN_CIB_NMP		0x000001F0
+#define SCAN_CIB_NMP_SHIFT	4
+#define SCAN_CIB_NSP		0x00003E00
+#define SCAN_CIB_NSP_SHIFT	9
+#define SCAN_CIB_NMW		0x0007C000
+#define SCAN_CIB_NMW_SHIFT	14
+#define SCAN_CIB_NSW		0x00F80000
+#define SCAN_CIB_NSW_SHIFT	17
+#define SCAN_CIB_REV		0xFF000000
+#define SCAN_CIB_REV_SHIFT	24
+
+#define SCAN_ADDR_AG32		0x00000008
+#define SCAN_ADDR_SZ		0x00000030
+#define SCAN_ADDR_SZ_SHIFT	4
+#define  SCAN_ADDR_SZ_4K	0x00000000
+#define  SCAN_ADDR_SZ_8K	0x00000010
+#define  SCAN_ADDR_SZ_16K	0x00000020
+#define  SCAN_ADDR_SZ_SZD	0x00000030
+#define SCAN_ADDR_TYPE		0x000000C0
+#define  SCAN_ADDR_TYPE_SLAVE	0x00000000
+#define  SCAN_ADDR_TYPE_BRIDGE	0x00000040
+#define  SCAN_ADDR_TYPE_SWRAP	0x00000080
+#define  SCAN_ADDR_TYPE_MWRAP	0x000000C0
+#define SCAN_ADDR_PORT		0x00000F00
+#define SCAN_ADDR_PORT_SHIFT	8
+#define SCAN_ADDR_ADDR		0xFFFFF000
+
+#define SCAN_ADDR_SZ_BASE	0x00001000	/* 4KB */
+
+#define SCAN_SIZE_SZ_ALIGN	0x00000FFF
+#define SCAN_SIZE_SZ		0xFFFFF000
+#define SCAN_SIZE_SG32		0x00000008
+
+#endif /* BCMA_SCAN_H_ */
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
new file mode 100644
index 00000000000..08763e4e848
--- /dev/null
+++ b/include/linux/bcma/bcma.h
@@ -0,0 +1,224 @@
+#ifndef LINUX_BCMA_H_
+#define LINUX_BCMA_H_
+
+#include <linux/pci.h>
+#include <linux/mod_devicetable.h>
+
+#include <linux/bcma/bcma_driver_chipcommon.h>
+#include <linux/bcma/bcma_driver_pci.h>
+
+#include "bcma_regs.h"
+
+struct bcma_device;
+struct bcma_bus;
+
+enum bcma_hosttype {
+	BCMA_HOSTTYPE_NONE,
+	BCMA_HOSTTYPE_PCI,
+	BCMA_HOSTTYPE_SDIO,
+};
+
+struct bcma_chipinfo {
+	u16 id;
+	u8 rev;
+	u8 pkg;
+};
+
+struct bcma_host_ops {
+	u8 (*read8)(struct bcma_device *core, u16 offset);
+	u16 (*read16)(struct bcma_device *core, u16 offset);
+	u32 (*read32)(struct bcma_device *core, u16 offset);
+	void (*write8)(struct bcma_device *core, u16 offset, u8 value);
+	void (*write16)(struct bcma_device *core, u16 offset, u16 value);
+	void (*write32)(struct bcma_device *core, u16 offset, u32 value);
+	/* Agent ops */
+	u32 (*aread32)(struct bcma_device *core, u16 offset);
+	void (*awrite32)(struct bcma_device *core, u16 offset, u32 value);
+};
+
+/* Core manufacturers */
+#define BCMA_MANUF_ARM			0x43B
+#define BCMA_MANUF_MIPS			0x4A7
+#define BCMA_MANUF_BCM			0x4BF
+
+/* Core class values. */
+#define BCMA_CL_SIM			0x0
+#define BCMA_CL_EROM			0x1
+#define BCMA_CL_CORESIGHT		0x9
+#define BCMA_CL_VERIF			0xB
+#define BCMA_CL_OPTIMO			0xD
+#define BCMA_CL_GEN			0xE
+#define BCMA_CL_PRIMECELL		0xF
+
+/* Core-ID values. */
+#define BCMA_CORE_OOB_ROUTER		0x367	/* Out of band */
+#define BCMA_CORE_INVALID		0x700
+#define BCMA_CORE_CHIPCOMMON		0x800
+#define BCMA_CORE_ILINE20		0x801
+#define BCMA_CORE_SRAM			0x802
+#define BCMA_CORE_SDRAM			0x803
+#define BCMA_CORE_PCI			0x804
+#define BCMA_CORE_MIPS			0x805
+#define BCMA_CORE_ETHERNET		0x806
+#define BCMA_CORE_V90			0x807
+#define BCMA_CORE_USB11_HOSTDEV		0x808
+#define BCMA_CORE_ADSL			0x809
+#define BCMA_CORE_ILINE100		0x80A
+#define BCMA_CORE_IPSEC			0x80B
+#define BCMA_CORE_UTOPIA		0x80C
+#define BCMA_CORE_PCMCIA		0x80D
+#define BCMA_CORE_INTERNAL_MEM		0x80E
+#define BCMA_CORE_MEMC_SDRAM		0x80F
+#define BCMA_CORE_OFDM			0x810
+#define BCMA_CORE_EXTIF			0x811
+#define BCMA_CORE_80211			0x812
+#define BCMA_CORE_PHY_A			0x813
+#define BCMA_CORE_PHY_B			0x814
+#define BCMA_CORE_PHY_G			0x815
+#define BCMA_CORE_MIPS_3302		0x816
+#define BCMA_CORE_USB11_HOST		0x817
+#define BCMA_CORE_USB11_DEV		0x818
+#define BCMA_CORE_USB20_HOST		0x819
+#define BCMA_CORE_USB20_DEV		0x81A
+#define BCMA_CORE_SDIO_HOST		0x81B
+#define BCMA_CORE_ROBOSWITCH		0x81C
+#define BCMA_CORE_PARA_ATA		0x81D
+#define BCMA_CORE_SATA_XORDMA		0x81E
+#define BCMA_CORE_ETHERNET_GBIT		0x81F
+#define BCMA_CORE_PCIE			0x820
+#define BCMA_CORE_PHY_N			0x821
+#define BCMA_CORE_SRAM_CTL		0x822
+#define BCMA_CORE_MINI_MACPHY		0x823
+#define BCMA_CORE_ARM_1176		0x824
+#define BCMA_CORE_ARM_7TDMI		0x825
+#define BCMA_CORE_PHY_LP		0x826
+#define BCMA_CORE_PMU			0x827
+#define BCMA_CORE_PHY_SSN		0x828
+#define BCMA_CORE_SDIO_DEV		0x829
+#define BCMA_CORE_ARM_CM3		0x82A
+#define BCMA_CORE_PHY_HT		0x82B
+#define BCMA_CORE_MIPS_74K		0x82C
+#define BCMA_CORE_MAC_GBIT		0x82D
+#define BCMA_CORE_DDR12_MEM_CTL		0x82E
+#define BCMA_CORE_PCIE_RC		0x82F	/* PCIe Root Complex */
+#define BCMA_CORE_OCP_OCP_BRIDGE	0x830
+#define BCMA_CORE_SHARED_COMMON		0x831
+#define BCMA_CORE_OCP_AHB_BRIDGE	0x832
+#define BCMA_CORE_SPI_HOST		0x833
+#define BCMA_CORE_I2S			0x834
+#define BCMA_CORE_SDR_DDR1_MEM_CTL	0x835	/* SDR/DDR1 memory controller core */
+#define BCMA_CORE_SHIM			0x837	/* SHIM component in ubus/6362 */
+#define BCMA_CORE_DEFAULT		0xFFF
+
+#define BCMA_MAX_NR_CORES		16
+
+struct bcma_device {
+	struct bcma_bus *bus;
+	struct bcma_device_id id;
+
+	struct device dev;
+	bool dev_registered;
+
+	u8 core_index;
+
+	u32 addr;
+	u32 wrap;
+
+	void *drvdata;
+	struct list_head list;
+};
+
+static inline void *bcma_get_drvdata(struct bcma_device *core)
+{
+	return core->drvdata;
+}
+static inline void bcma_set_drvdata(struct bcma_device *core, void *drvdata)
+{
+	core->drvdata = drvdata;
+}
+
+struct bcma_driver {
+	const char *name;
+	const struct bcma_device_id *id_table;
+
+	int (*probe)(struct bcma_device *dev);
+	void (*remove)(struct bcma_device *dev);
+	int (*suspend)(struct bcma_device *dev, pm_message_t state);
+	int (*resume)(struct bcma_device *dev);
+	void (*shutdown)(struct bcma_device *dev);
+
+	struct device_driver drv;
+};
+extern
+int __bcma_driver_register(struct bcma_driver *drv, struct module *owner);
+static inline int bcma_driver_register(struct bcma_driver *drv)
+{
+	return __bcma_driver_register(drv, THIS_MODULE);
+}
+extern void bcma_driver_unregister(struct bcma_driver *drv);
+
+struct bcma_bus {
+	/* The MMIO area. */
+	void __iomem *mmio;
+
+	const struct bcma_host_ops *ops;
+
+	enum bcma_hosttype hosttype;
+	union {
+		/* Pointer to the PCI bus (only for BCMA_HOSTTYPE_PCI) */
+		struct pci_dev *host_pci;
+		/* Pointer to the SDIO device (only for BCMA_HOSTTYPE_SDIO) */
+		struct sdio_func *host_sdio;
+	};
+
+	struct bcma_chipinfo chipinfo;
+
+	struct bcma_device *mapped_core;
+	struct list_head cores;
+	u8 nr_cores;
+
+	struct bcma_drv_cc drv_cc;
+	struct bcma_drv_pci drv_pci;
+};
+
+extern inline u32 bcma_read8(struct bcma_device *core, u16 offset)
+{
+	return core->bus->ops->read8(core, offset);
+}
+extern inline u32 bcma_read16(struct bcma_device *core, u16 offset)
+{
+	return core->bus->ops->read16(core, offset);
+}
+extern inline u32 bcma_read32(struct bcma_device *core, u16 offset)
+{
+	return core->bus->ops->read32(core, offset);
+}
+extern inline
+void bcma_write8(struct bcma_device *core, u16 offset, u32 value)
+{
+	core->bus->ops->write8(core, offset, value);
+}
+extern inline
+void bcma_write16(struct bcma_device *core, u16 offset, u32 value)
+{
+	core->bus->ops->write16(core, offset, value);
+}
+extern inline
+void bcma_write32(struct bcma_device *core, u16 offset, u32 value)
+{
+	core->bus->ops->write32(core, offset, value);
+}
+extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset)
+{
+	return core->bus->ops->aread32(core, offset);
+}
+extern inline
+void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value)
+{
+	core->bus->ops->awrite32(core, offset, value);
+}
+
+extern bool bcma_core_is_enabled(struct bcma_device *core);
+extern int bcma_core_enable(struct bcma_device *core, u32 flags);
+
+#endif /* LINUX_BCMA_H_ */
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
new file mode 100644
index 00000000000..4f8fd6a4c1e
--- /dev/null
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -0,0 +1,297 @@
+#ifndef LINUX_BCMA_DRIVER_CC_H_
+#define LINUX_BCMA_DRIVER_CC_H_
+
+/** ChipCommon core registers. **/
+#define BCMA_CC_ID			0x0000
+#define  BCMA_CC_ID_ID			0x0000FFFF
+#define  BCMA_CC_ID_ID_SHIFT		0
+#define  BCMA_CC_ID_REV			0x000F0000
+#define  BCMA_CC_ID_REV_SHIFT		16
+#define  BCMA_CC_ID_PKG			0x00F00000
+#define  BCMA_CC_ID_PKG_SHIFT		20
+#define  BCMA_CC_ID_NRCORES		0x0F000000
+#define  BCMA_CC_ID_NRCORES_SHIFT	24
+#define  BCMA_CC_ID_TYPE		0xF0000000
+#define  BCMA_CC_ID_TYPE_SHIFT		28
+#define BCMA_CC_CAP			0x0004		/* Capabilities */
+#define  BCMA_CC_CAP_NRUART		0x00000003	/* # of UARTs */
+#define  BCMA_CC_CAP_MIPSEB		0x00000004	/* MIPS in BigEndian Mode */
+#define  BCMA_CC_CAP_UARTCLK		0x00000018	/* UART clock select */
+#define   BCMA_CC_CAP_UARTCLK_INT	0x00000008	/* UARTs are driven by internal divided clock */
+#define  BCMA_CC_CAP_UARTGPIO		0x00000020	/* UARTs on GPIO 15-12 */
+#define  BCMA_CC_CAP_EXTBUS		0x000000C0	/* External buses present */
+#define  BCMA_CC_CAP_FLASHT		0x00000700	/* Flash Type */
+#define   BCMA_CC_FLASHT_NONE		0x00000000	/* No flash */
+#define   BCMA_CC_FLASHT_STSER		0x00000100	/* ST serial flash */
+#define   BCMA_CC_FLASHT_ATSER		0x00000200	/* Atmel serial flash */
+#define	  BCMA_CC_FLASHT_PARA		0x00000700	/* Parallel flash */
+#define  BCMA_CC_CAP_PLLT		0x00038000	/* PLL Type */
+#define   BCMA_PLLTYPE_NONE		0x00000000
+#define   BCMA_PLLTYPE_1		0x00010000	/* 48Mhz base, 3 dividers */
+#define   BCMA_PLLTYPE_2		0x00020000	/* 48Mhz, 4 dividers */
+#define   BCMA_PLLTYPE_3		0x00030000	/* 25Mhz, 2 dividers */
+#define   BCMA_PLLTYPE_4		0x00008000	/* 48Mhz, 4 dividers */
+#define   BCMA_PLLTYPE_5		0x00018000	/* 25Mhz, 4 dividers */
+#define   BCMA_PLLTYPE_6		0x00028000	/* 100/200 or 120/240 only */
+#define   BCMA_PLLTYPE_7		0x00038000	/* 25Mhz, 4 dividers */
+#define  BCMA_CC_CAP_PCTL		0x00040000	/* Power Control */
+#define  BCMA_CC_CAP_OTPS		0x00380000	/* OTP size */
+#define  BCMA_CC_CAP_OTPS_SHIFT		19
+#define  BCMA_CC_CAP_OTPS_BASE		5
+#define  BCMA_CC_CAP_JTAGM		0x00400000	/* JTAG master present */
+#define  BCMA_CC_CAP_BROM		0x00800000	/* Internal boot ROM active */
+#define  BCMA_CC_CAP_64BIT		0x08000000	/* 64-bit Backplane */
+#define  BCMA_CC_CAP_PMU		0x10000000	/* PMU available (rev >= 20) */
+#define  BCMA_CC_CAP_ECI		0x20000000	/* ECI available (rev >= 20) */
+#define  BCMA_CC_CAP_SPROM		0x40000000	/* SPROM present */
+#define BCMA_CC_CORECTL			0x0008
+#define  BCMA_CC_CORECTL_UARTCLK0	0x00000001	/* Drive UART with internal clock */
+#define	 BCMA_CC_CORECTL_SE		0x00000002	/* sync clk out enable (corerev >= 3) */
+#define  BCMA_CC_CORECTL_UARTCLKEN	0x00000008	/* UART clock enable (rev >= 21) */
+#define BCMA_CC_BIST			0x000C
+#define BCMA_CC_OTPS			0x0010		/* OTP status */
+#define	 BCMA_CC_OTPS_PROGFAIL		0x80000000
+#define	 BCMA_CC_OTPS_PROTECT		0x00000007
+#define	 BCMA_CC_OTPS_HW_PROTECT	0x00000001
+#define	 BCMA_CC_OTPS_SW_PROTECT	0x00000002
+#define	 BCMA_CC_OTPS_CID_PROTECT	0x00000004
+#define BCMA_CC_OTPC			0x0014		/* OTP control */
+#define	 BCMA_CC_OTPC_RECWAIT		0xFF000000
+#define	 BCMA_CC_OTPC_PROGWAIT		0x00FFFF00
+#define	 BCMA_CC_OTPC_PRW_SHIFT		8
+#define	 BCMA_CC_OTPC_MAXFAIL		0x00000038
+#define	 BCMA_CC_OTPC_VSEL		0x00000006
+#define	 BCMA_CC_OTPC_SELVL		0x00000001
+#define BCMA_CC_OTPP			0x0018		/* OTP prog */
+#define	 BCMA_CC_OTPP_COL		0x000000FF
+#define	 BCMA_CC_OTPP_ROW		0x0000FF00
+#define	 BCMA_CC_OTPP_ROW_SHIFT		8
+#define	 BCMA_CC_OTPP_READERR		0x10000000
+#define	 BCMA_CC_OTPP_VALUE		0x20000000
+#define	 BCMA_CC_OTPP_READ		0x40000000
+#define	 BCMA_CC_OTPP_START		0x80000000
+#define	 BCMA_CC_OTPP_BUSY		0x80000000
+#define BCMA_CC_IRQSTAT			0x0020
+#define BCMA_CC_IRQMASK			0x0024
+#define	 BCMA_CC_IRQ_GPIO		0x00000001	/* gpio intr */
+#define	 BCMA_CC_IRQ_EXT		0x00000002	/* ro: ext intr pin (corerev >= 3) */
+#define	 BCMA_CC_IRQ_WDRESET		0x80000000	/* watchdog reset occurred */
+#define BCMA_CC_CHIPCTL			0x0028		/* Rev >= 11 only */
+#define BCMA_CC_CHIPSTAT		0x002C		/* Rev >= 11 only */
+#define BCMA_CC_JCMD			0x0030		/* Rev >= 10 only */
+#define  BCMA_CC_JCMD_START		0x80000000
+#define  BCMA_CC_JCMD_BUSY		0x80000000
+#define  BCMA_CC_JCMD_PAUSE		0x40000000
+#define  BCMA_CC_JCMD0_ACC_MASK		0x0000F000
+#define  BCMA_CC_JCMD0_ACC_IRDR		0x00000000
+#define  BCMA_CC_JCMD0_ACC_DR		0x00001000
+#define  BCMA_CC_JCMD0_ACC_IR		0x00002000
+#define  BCMA_CC_JCMD0_ACC_RESET	0x00003000
+#define  BCMA_CC_JCMD0_ACC_IRPDR	0x00004000
+#define  BCMA_CC_JCMD0_ACC_PDR		0x00005000
+#define  BCMA_CC_JCMD0_IRW_MASK		0x00000F00
+#define  BCMA_CC_JCMD_ACC_MASK		0x000F0000	/* Changes for corerev 11 */
+#define  BCMA_CC_JCMD_ACC_IRDR		0x00000000
+#define  BCMA_CC_JCMD_ACC_DR		0x00010000
+#define  BCMA_CC_JCMD_ACC_IR		0x00020000
+#define  BCMA_CC_JCMD_ACC_RESET		0x00030000
+#define  BCMA_CC_JCMD_ACC_IRPDR		0x00040000
+#define  BCMA_CC_JCMD_ACC_PDR		0x00050000
+#define  BCMA_CC_JCMD_IRW_MASK		0x00001F00
+#define  BCMA_CC_JCMD_IRW_SHIFT		8
+#define  BCMA_CC_JCMD_DRW_MASK		0x0000003F
+#define BCMA_CC_JIR			0x0034		/* Rev >= 10 only */
+#define BCMA_CC_JDR			0x0038		/* Rev >= 10 only */
+#define BCMA_CC_JCTL			0x003C		/* Rev >= 10 only */
+#define  BCMA_CC_JCTL_FORCE_CLK		4		/* Force clock */
+#define  BCMA_CC_JCTL_EXT_EN		2		/* Enable external targets */
+#define  BCMA_CC_JCTL_EN		1		/* Enable Jtag master */
+#define BCMA_CC_FLASHCTL		0x0040
+#define  BCMA_CC_FLASHCTL_START		0x80000000
+#define  BCMA_CC_FLASHCTL_BUSY		BCMA_CC_FLASHCTL_START
+#define BCMA_CC_FLASHADDR		0x0044
+#define BCMA_CC_FLASHDATA		0x0048
+#define BCMA_CC_BCAST_ADDR		0x0050
+#define BCMA_CC_BCAST_DATA		0x0054
+#define BCMA_CC_GPIOIN			0x0060
+#define BCMA_CC_GPIOOUT			0x0064
+#define BCMA_CC_GPIOOUTEN		0x0068
+#define BCMA_CC_GPIOCTL			0x006C
+#define BCMA_CC_GPIOPOL			0x0070
+#define BCMA_CC_GPIOIRQ			0x0074
+#define BCMA_CC_WATCHDOG		0x0080
+#define BCMA_CC_GPIOTIMER		0x0088		/* LED powersave (corerev >= 16) */
+#define  BCMA_CC_GPIOTIMER_ONTIME_SHIFT	16
+#define BCMA_CC_GPIOTOUTM		0x008C		/* LED powersave (corerev >= 16) */
+#define BCMA_CC_CLOCK_N			0x0090
+#define BCMA_CC_CLOCK_SB		0x0094
+#define BCMA_CC_CLOCK_PCI		0x0098
+#define BCMA_CC_CLOCK_M2		0x009C
+#define BCMA_CC_CLOCK_MIPS		0x00A0
+#define BCMA_CC_CLKDIV			0x00A4		/* Rev >= 3 only */
+#define	 BCMA_CC_CLKDIV_SFLASH		0x0F000000
+#define	 BCMA_CC_CLKDIV_SFLASH_SHIFT	24
+#define	 BCMA_CC_CLKDIV_OTP		0x000F0000
+#define	 BCMA_CC_CLKDIV_OTP_SHIFT	16
+#define	 BCMA_CC_CLKDIV_JTAG		0x00000F00
+#define	 BCMA_CC_CLKDIV_JTAG_SHIFT	8
+#define	 BCMA_CC_CLKDIV_UART		0x000000FF
+#define BCMA_CC_CAP_EXT			0x00AC		/* Capabilities */
+#define BCMA_CC_PLLONDELAY		0x00B0		/* Rev >= 4 only */
+#define BCMA_CC_FREFSELDELAY		0x00B4		/* Rev >= 4 only */
+#define BCMA_CC_SLOWCLKCTL		0x00B8		/* 6 <= Rev <= 9 only */
+#define  BCMA_CC_SLOWCLKCTL_SRC		0x00000007	/* slow clock source mask */
+#define	  BCMA_CC_SLOWCLKCTL_SRC_LPO	0x00000000	/* source of slow clock is LPO */
+#define   BCMA_CC_SLOWCLKCTL_SRC_XTAL	0x00000001	/* source of slow clock is crystal */
+#define	  BCMA_CC_SLOECLKCTL_SRC_PCI	0x00000002	/* source of slow clock is PCI */
+#define  BCMA_CC_SLOWCLKCTL_LPOFREQ	0x00000200	/* LPOFreqSel, 1: 160Khz, 0: 32KHz */
+#define  BCMA_CC_SLOWCLKCTL_LPOPD	0x00000400	/* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
+#define  BCMA_CC_SLOWCLKCTL_FSLOW	0x00000800	/* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
+#define  BCMA_CC_SLOWCLKCTL_IPLL	0x00001000	/* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
+#define  BCMA_CC_SLOWCLKCTL_ENXTAL	0x00002000	/* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
+#define  BCMA_CC_SLOWCLKCTL_XTALPU	0x00004000	/* XtalPU (RO), 1/0: crystal running/disabled */
+#define  BCMA_CC_SLOWCLKCTL_CLKDIV	0xFFFF0000	/* ClockDivider (SlowClk = 1/(4+divisor)) */
+#define  BCMA_CC_SLOWCLKCTL_CLKDIV_SHIFT	16
+#define BCMA_CC_SYSCLKCTL		0x00C0		/* Rev >= 3 only */
+#define	 BCMA_CC_SYSCLKCTL_IDLPEN	0x00000001	/* ILPen: Enable Idle Low Power */
+#define	 BCMA_CC_SYSCLKCTL_ALPEN	0x00000002	/* ALPen: Enable Active Low Power */
+#define	 BCMA_CC_SYSCLKCTL_PLLEN	0x00000004	/* ForcePLLOn */
+#define	 BCMA_CC_SYSCLKCTL_FORCEALP	0x00000008	/* Force ALP (or HT if ALPen is not set */
+#define	 BCMA_CC_SYSCLKCTL_FORCEHT	0x00000010	/* Force HT */
+#define  BCMA_CC_SYSCLKCTL_CLKDIV	0xFFFF0000	/* ClkDiv  (ILP = 1/(4+divisor)) */
+#define  BCMA_CC_SYSCLKCTL_CLKDIV_SHIFT	16
+#define BCMA_CC_CLKSTSTR		0x00C4		/* Rev >= 3 only */
+#define BCMA_CC_EROM			0x00FC
+#define BCMA_CC_PCMCIA_CFG		0x0100
+#define BCMA_CC_PCMCIA_MEMWAIT		0x0104
+#define BCMA_CC_PCMCIA_ATTRWAIT		0x0108
+#define BCMA_CC_PCMCIA_IOWAIT		0x010C
+#define BCMA_CC_IDE_CFG			0x0110
+#define BCMA_CC_IDE_MEMWAIT		0x0114
+#define BCMA_CC_IDE_ATTRWAIT		0x0118
+#define BCMA_CC_IDE_IOWAIT		0x011C
+#define BCMA_CC_PROG_CFG		0x0120
+#define BCMA_CC_PROG_WAITCNT		0x0124
+#define BCMA_CC_FLASH_CFG		0x0128
+#define BCMA_CC_FLASH_WAITCNT		0x012C
+#define BCMA_CC_CLKCTLST		0x01E0 /* Clock control and status (rev >= 20) */
+#define  BCMA_CC_CLKCTLST_FORCEALP	0x00000001 /* Force ALP request */
+#define  BCMA_CC_CLKCTLST_FORCEHT	0x00000002 /* Force HT request */
+#define  BCMA_CC_CLKCTLST_FORCEILP	0x00000004 /* Force ILP request */
+#define  BCMA_CC_CLKCTLST_HAVEALPREQ	0x00000008 /* ALP available request */
+#define  BCMA_CC_CLKCTLST_HAVEHTREQ	0x00000010 /* HT available request */
+#define  BCMA_CC_CLKCTLST_HWCROFF	0x00000020 /* Force HW clock request off */
+#define  BCMA_CC_CLKCTLST_HAVEHT	0x00010000 /* HT available */
+#define  BCMA_CC_CLKCTLST_HAVEALP	0x00020000 /* APL available */
+#define BCMA_CC_HW_WORKAROUND		0x01E4 /* Hardware workaround (rev >= 20) */
+#define BCMA_CC_UART0_DATA		0x0300
+#define BCMA_CC_UART0_IMR		0x0304
+#define BCMA_CC_UART0_FCR		0x0308
+#define BCMA_CC_UART0_LCR		0x030C
+#define BCMA_CC_UART0_MCR		0x0310
+#define BCMA_CC_UART0_LSR		0x0314
+#define BCMA_CC_UART0_MSR		0x0318
+#define BCMA_CC_UART0_SCRATCH		0x031C
+#define BCMA_CC_UART1_DATA		0x0400
+#define BCMA_CC_UART1_IMR		0x0404
+#define BCMA_CC_UART1_FCR		0x0408
+#define BCMA_CC_UART1_LCR		0x040C
+#define BCMA_CC_UART1_MCR		0x0410
+#define BCMA_CC_UART1_LSR		0x0414
+#define BCMA_CC_UART1_MSR		0x0418
+#define BCMA_CC_UART1_SCRATCH		0x041C
+/* PMU registers (rev >= 20) */
+#define BCMA_CC_PMU_CTL			0x0600 /* PMU control */
+#define  BCMA_CC_PMU_CTL_ILP_DIV	0xFFFF0000 /* ILP div mask */
+#define  BCMA_CC_PMU_CTL_ILP_DIV_SHIFT	16
+#define  BCMA_CC_PMU_CTL_NOILPONW	0x00000200 /* No ILP on wait */
+#define  BCMA_CC_PMU_CTL_HTREQEN	0x00000100 /* HT req enable */
+#define  BCMA_CC_PMU_CTL_ALPREQEN	0x00000080 /* ALP req enable */
+#define  BCMA_CC_PMU_CTL_XTALFREQ	0x0000007C /* Crystal freq */
+#define  BCMA_CC_PMU_CTL_XTALFREQ_SHIFT	2
+#define  BCMA_CC_PMU_CTL_ILPDIVEN	0x00000002 /* ILP div enable */
+#define  BCMA_CC_PMU_CTL_LPOSEL		0x00000001 /* LPO sel */
+#define BCMA_CC_PMU_CAP			0x0604 /* PMU capabilities */
+#define  BCMA_CC_PMU_CAP_REVISION	0x000000FF /* Revision mask */
+#define BCMA_CC_PMU_STAT		0x0608 /* PMU status */
+#define  BCMA_CC_PMU_STAT_INTPEND	0x00000040 /* Interrupt pending */
+#define  BCMA_CC_PMU_STAT_SBCLKST	0x00000030 /* Backplane clock status? */
+#define  BCMA_CC_PMU_STAT_HAVEALP	0x00000008 /* ALP available */
+#define  BCMA_CC_PMU_STAT_HAVEHT	0x00000004 /* HT available */
+#define  BCMA_CC_PMU_STAT_RESINIT	0x00000003 /* Res init */
+#define BCMA_CC_PMU_RES_STAT		0x060C /* PMU res status */
+#define BCMA_CC_PMU_RES_PEND		0x0610 /* PMU res pending */
+#define BCMA_CC_PMU_TIMER		0x0614 /* PMU timer */
+#define BCMA_CC_PMU_MINRES_MSK		0x0618 /* PMU min res mask */
+#define BCMA_CC_PMU_MAXRES_MSK		0x061C /* PMU max res mask */
+#define BCMA_CC_PMU_RES_TABSEL		0x0620 /* PMU res table sel */
+#define BCMA_CC_PMU_RES_DEPMSK		0x0624 /* PMU res dep mask */
+#define BCMA_CC_PMU_RES_UPDNTM		0x0628 /* PMU res updown timer */
+#define BCMA_CC_PMU_RES_TIMER		0x062C /* PMU res timer */
+#define BCMA_CC_PMU_CLKSTRETCH		0x0630 /* PMU clockstretch */
+#define BCMA_CC_PMU_WATCHDOG		0x0634 /* PMU watchdog */
+#define BCMA_CC_PMU_RES_REQTS		0x0640 /* PMU res req timer sel */
+#define BCMA_CC_PMU_RES_REQT		0x0644 /* PMU res req timer */
+#define BCMA_CC_PMU_RES_REQM		0x0648 /* PMU res req mask */
+#define BCMA_CC_CHIPCTL_ADDR		0x0650
+#define BCMA_CC_CHIPCTL_DATA		0x0654
+#define BCMA_CC_REGCTL_ADDR		0x0658
+#define BCMA_CC_REGCTL_DATA		0x065C
+#define BCMA_CC_PLLCTL_ADDR		0x0660
+#define BCMA_CC_PLLCTL_DATA		0x0664
+
+/* Data for the PMU, if available.
+ * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
+ */
+struct bcma_chipcommon_pmu {
+	u8 rev;			/* PMU revision */
+	u32 crystalfreq;	/* The active crystal frequency (in kHz) */
+};
+
+struct bcma_drv_cc {
+	struct bcma_device *core;
+	u32 status;
+	u32 capabilities;
+	u32 capabilities_ext;
+	/* Fast Powerup Delay constant */
+	u16 fast_pwrup_delay;
+	struct bcma_chipcommon_pmu pmu;
+};
+
+/* Register access */
+#define bcma_cc_read32(cc, offset) \
+	bcma_read32((cc)->core, offset)
+#define bcma_cc_write32(cc, offset, val) \
+	bcma_write32((cc)->core, offset, val)
+
+#define bcma_cc_mask32(cc, offset, mask) \
+	bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) & (mask))
+#define bcma_cc_set32(cc, offset, set) \
+	bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) | (set))
+#define bcma_cc_maskset32(cc, offset, mask, set) \
+	bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
+
+extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
+
+extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
+extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
+
+extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
+					  u32 ticks);
+
+void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+
+u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
+
+/* Chipcommon GPIO pin access. */
+u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask);
+u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
+
+/* PMU support */
+extern void bcma_pmu_init(struct bcma_drv_cc *cc);
+
+#endif /* LINUX_BCMA_DRIVER_CC_H_ */
diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h
new file mode 100644
index 00000000000..b7e191cf00e
--- /dev/null
+++ b/include/linux/bcma/bcma_driver_pci.h
@@ -0,0 +1,89 @@
+#ifndef LINUX_BCMA_DRIVER_PCI_H_
+#define LINUX_BCMA_DRIVER_PCI_H_
+
+#include <linux/types.h>
+
+struct pci_dev;
+
+/** PCI core registers. **/
+#define BCMA_CORE_PCI_CTL			0x0000	/* PCI Control */
+#define  BCMA_CORE_PCI_CTL_RST_OE		0x00000001 /* PCI_RESET Output Enable */
+#define  BCMA_CORE_PCI_CTL_RST			0x00000002 /* PCI_RESET driven out to pin */
+#define  BCMA_CORE_PCI_CTL_CLK_OE		0x00000004 /* Clock gate Output Enable */
+#define  BCMA_CORE_PCI_CTL_CLK			0x00000008 /* Gate for clock driven out to pin */
+#define BCMA_CORE_PCI_ARBCTL			0x0010	/* PCI Arbiter Control */
+#define  BCMA_CORE_PCI_ARBCTL_INTERN		0x00000001 /* Use internal arbiter */
+#define  BCMA_CORE_PCI_ARBCTL_EXTERN		0x00000002 /* Use external arbiter */
+#define  BCMA_CORE_PCI_ARBCTL_PARKID		0x00000006 /* Mask, selects which agent is parked on an idle bus */
+#define   BCMA_CORE_PCI_ARBCTL_PARKID_LAST	0x00000000 /* Last requestor */
+#define   BCMA_CORE_PCI_ARBCTL_PARKID_4710	0x00000002 /* 4710 */
+#define   BCMA_CORE_PCI_ARBCTL_PARKID_EXT0	0x00000004 /* External requestor 0 */
+#define   BCMA_CORE_PCI_ARBCTL_PARKID_EXT1	0x00000006 /* External requestor 1 */
+#define BCMA_CORE_PCI_ISTAT			0x0020	/* Interrupt status */
+#define  BCMA_CORE_PCI_ISTAT_INTA		0x00000001 /* PCI INTA# */
+#define  BCMA_CORE_PCI_ISTAT_INTB		0x00000002 /* PCI INTB# */
+#define  BCMA_CORE_PCI_ISTAT_SERR		0x00000004 /* PCI SERR# (write to clear) */
+#define  BCMA_CORE_PCI_ISTAT_PERR		0x00000008 /* PCI PERR# (write to clear) */
+#define  BCMA_CORE_PCI_ISTAT_PME		0x00000010 /* PCI PME# */
+#define BCMA_CORE_PCI_IMASK			0x0024	/* Interrupt mask */
+#define  BCMA_CORE_PCI_IMASK_INTA		0x00000001 /* PCI INTA# */
+#define  BCMA_CORE_PCI_IMASK_INTB		0x00000002 /* PCI INTB# */
+#define  BCMA_CORE_PCI_IMASK_SERR		0x00000004 /* PCI SERR# */
+#define  BCMA_CORE_PCI_IMASK_PERR		0x00000008 /* PCI PERR# */
+#define  BCMA_CORE_PCI_IMASK_PME		0x00000010 /* PCI PME# */
+#define BCMA_CORE_PCI_MBOX			0x0028	/* Backplane to PCI Mailbox */
+#define  BCMA_CORE_PCI_MBOX_F0_0		0x00000100 /* PCI function 0, INT 0 */
+#define  BCMA_CORE_PCI_MBOX_F0_1		0x00000200 /* PCI function 0, INT 1 */
+#define  BCMA_CORE_PCI_MBOX_F1_0		0x00000400 /* PCI function 1, INT 0 */
+#define  BCMA_CORE_PCI_MBOX_F1_1		0x00000800 /* PCI function 1, INT 1 */
+#define  BCMA_CORE_PCI_MBOX_F2_0		0x00001000 /* PCI function 2, INT 0 */
+#define  BCMA_CORE_PCI_MBOX_F2_1		0x00002000 /* PCI function 2, INT 1 */
+#define  BCMA_CORE_PCI_MBOX_F3_0		0x00004000 /* PCI function 3, INT 0 */
+#define  BCMA_CORE_PCI_MBOX_F3_1		0x00008000 /* PCI function 3, INT 1 */
+#define BCMA_CORE_PCI_BCAST_ADDR		0x0050	/* Backplane Broadcast Address */
+#define  BCMA_CORE_PCI_BCAST_ADDR_MASK		0x000000FF
+#define BCMA_CORE_PCI_BCAST_DATA		0x0054	/* Backplane Broadcast Data */
+#define BCMA_CORE_PCI_GPIO_IN			0x0060	/* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_OUT			0x0064	/* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_ENABLE		0x0068	/* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_CTL			0x006C	/* rev >= 2 only */
+#define BCMA_CORE_PCI_SBTOPCI0			0x0100	/* Backplane to PCI translation 0 (sbtopci0) */
+#define  BCMA_CORE_PCI_SBTOPCI0_MASK		0xFC000000
+#define BCMA_CORE_PCI_SBTOPCI1			0x0104	/* Backplane to PCI translation 1 (sbtopci1) */
+#define  BCMA_CORE_PCI_SBTOPCI1_MASK		0xFC000000
+#define BCMA_CORE_PCI_SBTOPCI2			0x0108	/* Backplane to PCI translation 2 (sbtopci2) */
+#define  BCMA_CORE_PCI_SBTOPCI2_MASK		0xC0000000
+#define BCMA_CORE_PCI_PCICFG0			0x0400	/* PCI config space 0 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG1			0x0500	/* PCI config space 1 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG2			0x0600	/* PCI config space 2 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG3			0x0700	/* PCI config space 3 (rev >= 8) */
+#define BCMA_CORE_PCI_SPROM(wordoffset)		(0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */
+
+/* SBtoPCIx */
+#define BCMA_CORE_PCI_SBTOPCI_MEM		0x00000000
+#define BCMA_CORE_PCI_SBTOPCI_IO		0x00000001
+#define BCMA_CORE_PCI_SBTOPCI_CFG0		0x00000002
+#define BCMA_CORE_PCI_SBTOPCI_CFG1		0x00000003
+#define BCMA_CORE_PCI_SBTOPCI_PREF		0x00000004 /* Prefetch enable */
+#define BCMA_CORE_PCI_SBTOPCI_BURST		0x00000008 /* Burst enable */
+#define BCMA_CORE_PCI_SBTOPCI_MRM		0x00000020 /* Memory Read Multiple */
+#define BCMA_CORE_PCI_SBTOPCI_RC		0x00000030 /* Read Command mask (rev >= 11) */
+#define  BCMA_CORE_PCI_SBTOPCI_RC_READ		0x00000000 /* Memory read */
+#define  BCMA_CORE_PCI_SBTOPCI_RC_READL		0x00000010 /* Memory read line */
+#define  BCMA_CORE_PCI_SBTOPCI_RC_READM		0x00000020 /* Memory read multiple */
+
+/* PCIcore specific boardflags */
+#define BCMA_CORE_PCI_BFL_NOPCI			0x00000400 /* Board leaves PCI floating */
+
+struct bcma_drv_pci {
+	struct bcma_device *core;
+	u8 setup_done:1;
+};
+
+/* Register access */
+#define pcicore_read32(pc, offset)		bcma_read32((pc)->core, offset)
+#define pcicore_write32(pc, offset, val)	bcma_write32((pc)->core, offset, val)
+
+extern void bcma_core_pci_init(struct bcma_drv_pci *pc);
+
+#endif /* LINUX_BCMA_DRIVER_PCI_H_ */
diff --git a/include/linux/bcma/bcma_regs.h b/include/linux/bcma/bcma_regs.h
new file mode 100644
index 00000000000..f82d88a960c
--- /dev/null
+++ b/include/linux/bcma/bcma_regs.h
@@ -0,0 +1,34 @@
+#ifndef LINUX_BCMA_REGS_H_
+#define LINUX_BCMA_REGS_H_
+
+/* Agent registers (common for every core) */
+#define BCMA_IOCTL			0x0408
+#define  BCMA_IOCTL_CLK			0x0001
+#define  BCMA_IOCTL_FGC			0x0002
+#define  BCMA_IOCTL_CORE_BITS		0x3FFC
+#define  BCMA_IOCTL_PME_EN		0x4000
+#define  BCMA_IOCTL_BIST_EN		0x8000
+#define BCMA_RESET_CTL			0x0800
+#define  BCMA_RESET_CTL_RESET		0x0001
+
+/* BCMA PCI config space registers. */
+#define BCMA_PCI_PMCSR			0x44
+#define  BCMA_PCI_PE			0x100
+#define BCMA_PCI_BAR0_WIN		0x80	/* Backplane address space 0 */
+#define BCMA_PCI_BAR1_WIN		0x84	/* Backplane address space 1 */
+#define BCMA_PCI_SPROMCTL		0x88	/* SPROM control */
+#define  BCMA_PCI_SPROMCTL_WE		0x10	/* SPROM write enable */
+#define BCMA_PCI_BAR1_CONTROL		0x8c	/* Address space 1 burst control */
+#define BCMA_PCI_IRQS			0x90	/* PCI interrupts */
+#define BCMA_PCI_IRQMASK		0x94	/* PCI IRQ control and mask (pcirev >= 6 only) */
+#define BCMA_PCI_BACKPLANE_IRQS		0x98	/* Backplane Interrupts */
+#define BCMA_PCI_BAR0_WIN2		0xAC
+#define BCMA_PCI_GPIO_IN		0xB0	/* GPIO Input (pcirev >= 3 only) */
+#define BCMA_PCI_GPIO_OUT		0xB4	/* GPIO Output (pcirev >= 3 only) */
+#define BCMA_PCI_GPIO_OUT_ENABLE	0xB8	/* GPIO Output Enable/Disable (pcirev >= 3 only) */
+#define  BCMA_PCI_GPIO_SCS		0x10	/* PCI config space bit 4 for 4306c0 slow clock source */
+#define  BCMA_PCI_GPIO_HWRAD		0x20	/* PCI config space GPIO 13 for hw radio disable */
+#define  BCMA_PCI_GPIO_XTAL		0x40	/* PCI config space GPIO 14 for Xtal powerup */
+#define  BCMA_PCI_GPIO_PLL		0x80	/* PCI config space GPIO 15 for PLL powerdown */
+
+#endif /* LINUX_BCMA_REGS_H_ */
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 48c007dae47..ae28e93fd07 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -382,6 +382,23 @@ struct ssb_device_id {
 #define SSB_ANY_ID		0xFFFF
 #define SSB_ANY_REV		0xFF
 
+/* Broadcom's specific AMBA core, see drivers/bcma/ */
+struct bcma_device_id {
+	__u16	manuf;
+	__u16	id;
+	__u8	rev;
+	__u8	class;
+};
+#define BCMA_CORE(_manuf, _id, _rev, _class)  \
+	{ .manuf = _manuf, .id = _id, .rev = _rev, .class = _class, }
+#define BCMA_CORETABLE_END  \
+	{ 0, },
+
+#define BCMA_ANY_MANUF		0xFFFF
+#define BCMA_ANY_ID		0xFFFF
+#define BCMA_ANY_REV		0xFF
+#define BCMA_ANY_CLASS		0xFF
+
 struct virtio_device_id {
 	__u32 device;
 	__u32 vendor;
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 88f3f07205f..e26e2fb462d 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -702,6 +702,24 @@ static int do_ssb_entry(const char *filename,
 	return 1;
 }
 
+/* Looks like: bcma:mNidNrevNclN. */
+static int do_bcma_entry(const char *filename,
+			 struct bcma_device_id *id, char *alias)
+{
+	id->manuf = TO_NATIVE(id->manuf);
+	id->id = TO_NATIVE(id->id);
+	id->rev = TO_NATIVE(id->rev);
+	id->class = TO_NATIVE(id->class);
+
+	strcpy(alias, "bcma:");
+	ADD(alias, "m", id->manuf != BCMA_ANY_MANUF, id->manuf);
+	ADD(alias, "id", id->id != BCMA_ANY_ID, id->id);
+	ADD(alias, "rev", id->rev != BCMA_ANY_REV, id->rev);
+	ADD(alias, "cl", id->class != BCMA_ANY_CLASS, id->class);
+	add_wildcard(alias);
+	return 1;
+}
+
 /* Looks like: virtio:dNvN */
 static int do_virtio_entry(const char *filename, struct virtio_device_id *id,
 			   char *alias)
@@ -968,6 +986,10 @@ void handle_moddevtable(struct module *mod, struct elf_info *info,
 		do_table(symval, sym->st_size,
 			 sizeof(struct ssb_device_id), "ssb",
 			 do_ssb_entry, mod);
+	else if (sym_is(symname, "__mod_bcma_device_table"))
+		do_table(symval, sym->st_size,
+			 sizeof(struct bcma_device_id), "bcma",
+			 do_bcma_entry, mod);
 	else if (sym_is(symname, "__mod_virtio_device_table"))
 		do_table(symval, sym->st_size,
 			 sizeof(struct virtio_device_id), "virtio",
-- 
cgit v1.2.3


From 7cc5eb629cefa9a40295ff5ee4b1ec41ad855e8d Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Mon, 9 May 2011 19:00:18 -0700
Subject: mwifiex: remove unnecessary struct mwifiex_opt_sleep_confirm_buffer

The structure definition is
struct mwifiex_opt_sleep_confirm_buffer {
       u8 hdr[4];
       struct mwifiex_opt_sleep_confirm ps_cfm_sleep;
} __packed;

For sleep_confirm command we already reserve 4 bytes (using skb_reserve())
for an interface header. It will be filled later by interface specific code.
We don't need "hdr[4]" element in above structure. So we can use
"struct mwifiex_opt_sleep_confirm" directly instead of
"struct mwifiex_opt_sleep_confirm_buffer".

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cmdevt.c | 17 ++++++++---------
 drivers/net/wireless/mwifiex/fw.h     |  5 -----
 drivers/net/wireless/mwifiex/init.c   | 26 ++++++++++++--------------
 3 files changed, 20 insertions(+), 28 deletions(-)

diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index 1c8b4f7cba4..5c7539932c2 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -223,24 +223,23 @@ static int mwifiex_dnld_cmd_to_fw(struct mwifiex_private *priv,
 static int mwifiex_dnld_sleep_confirm_cmd(struct mwifiex_adapter *adapter)
 {
 	int ret;
-	u16 cmd_len;
 	struct mwifiex_private *priv;
-	struct mwifiex_opt_sleep_confirm_buffer *sleep_cfm_buf =
-				(struct mwifiex_opt_sleep_confirm_buffer *)
+	struct mwifiex_opt_sleep_confirm *sleep_cfm_buf =
+				(struct mwifiex_opt_sleep_confirm *)
 				adapter->sleep_cfm->data;
-	cmd_len = sizeof(struct mwifiex_opt_sleep_confirm);
 	priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
 
-	sleep_cfm_buf->ps_cfm_sleep.seq_num =
+	sleep_cfm_buf->seq_num =
 		cpu_to_le16((HostCmd_SET_SEQ_NO_BSS_INFO
 					(adapter->seq_num, priv->bss_num,
 					 priv->bss_type)));
 	adapter->seq_num++;
 
+	skb_push(adapter->sleep_cfm, INTF_HEADER_LEN);
 	ret = adapter->if_ops.host_to_card(adapter, MWIFIEX_TYPE_CMD,
 					     adapter->sleep_cfm->data,
-					     adapter->sleep_cfm->len +
-					     INTF_HEADER_LEN, NULL);
+					     adapter->sleep_cfm->len, NULL);
+	skb_pull(adapter->sleep_cfm, INTF_HEADER_LEN);
 
 	if (ret == -1) {
 		dev_err(adapter->dev, "SLEEP_CFM: failed\n");
@@ -249,14 +248,14 @@ static int mwifiex_dnld_sleep_confirm_cmd(struct mwifiex_adapter *adapter)
 	}
 	if (GET_BSS_ROLE(mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY))
 			== MWIFIEX_BSS_ROLE_STA) {
-		if (!sleep_cfm_buf->ps_cfm_sleep.resp_ctrl)
+		if (!sleep_cfm_buf->resp_ctrl)
 			/* Response is not needed for sleep
 			   confirm command */
 			adapter->ps_state = PS_STATE_SLEEP;
 		else
 			adapter->ps_state = PS_STATE_SLEEP_CFM;
 
-		if (!sleep_cfm_buf->ps_cfm_sleep.resp_ctrl
+		if (!sleep_cfm_buf->resp_ctrl
 				&& (adapter->is_hs_configured
 					&& !adapter->sleep_period.period)) {
 			adapter->pm_wakeup_card_req = true;
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 6d1c4545eda..c6b26819cd3 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -1198,9 +1198,4 @@ struct mwifiex_opt_sleep_confirm {
 	__le16 action;
 	__le16 resp_ctrl;
 } __packed;
-
-struct mwifiex_opt_sleep_confirm_buffer {
-	u8 hdr[4];
-	struct mwifiex_opt_sleep_confirm ps_cfm_sleep;
-} __packed;
 #endif /* !_MWIFIEX_FW_H_ */
diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c
index 6a8fd9989a2..3f1559e6132 100644
--- a/drivers/net/wireless/mwifiex/init.c
+++ b/drivers/net/wireless/mwifiex/init.c
@@ -175,7 +175,7 @@ static int mwifiex_allocate_adapter(struct mwifiex_adapter *adapter)
 	}
 
 	adapter->sleep_cfm =
-		dev_alloc_skb(sizeof(struct mwifiex_opt_sleep_confirm_buffer)
+		dev_alloc_skb(sizeof(struct mwifiex_opt_sleep_confirm)
 				+ INTF_HEADER_LEN);
 
 	if (!adapter->sleep_cfm) {
@@ -197,10 +197,10 @@ static int mwifiex_allocate_adapter(struct mwifiex_adapter *adapter)
  */
 static void mwifiex_init_adapter(struct mwifiex_adapter *adapter)
 {
-	struct mwifiex_opt_sleep_confirm_buffer *sleep_cfm_buf = NULL;
+	struct mwifiex_opt_sleep_confirm *sleep_cfm_buf = NULL;
 
-	skb_put(adapter->sleep_cfm, sizeof(sleep_cfm_buf->ps_cfm_sleep));
-	sleep_cfm_buf = (struct mwifiex_opt_sleep_confirm_buffer *)
+	skb_put(adapter->sleep_cfm, sizeof(struct mwifiex_opt_sleep_confirm));
+	sleep_cfm_buf = (struct mwifiex_opt_sleep_confirm *)
 						(adapter->sleep_cfm->data);
 
 	adapter->cmd_sent = false;
@@ -268,16 +268,14 @@ static void mwifiex_init_adapter(struct mwifiex_adapter *adapter)
 	mwifiex_wmm_init(adapter);
 
 	if (adapter->sleep_cfm) {
-		memset(&sleep_cfm_buf->ps_cfm_sleep, 0,
-			adapter->sleep_cfm->len);
-		sleep_cfm_buf->ps_cfm_sleep.command =
-			cpu_to_le16(HostCmd_CMD_802_11_PS_MODE_ENH);
-		sleep_cfm_buf->ps_cfm_sleep.size =
-			cpu_to_le16(adapter->sleep_cfm->len);
-		sleep_cfm_buf->ps_cfm_sleep.result = 0;
-		sleep_cfm_buf->ps_cfm_sleep.action = cpu_to_le16(SLEEP_CONFIRM);
-		sleep_cfm_buf->ps_cfm_sleep.resp_ctrl =
-			cpu_to_le16(RESP_NEEDED);
+		memset(sleep_cfm_buf, 0, adapter->sleep_cfm->len);
+		sleep_cfm_buf->command =
+				cpu_to_le16(HostCmd_CMD_802_11_PS_MODE_ENH);
+		sleep_cfm_buf->size =
+				cpu_to_le16(adapter->sleep_cfm->len);
+		sleep_cfm_buf->result = 0;
+		sleep_cfm_buf->action = cpu_to_le16(SLEEP_CONFIRM);
+		sleep_cfm_buf->resp_ctrl = cpu_to_le16(RESP_NEEDED);
 	}
 	memset(&adapter->sleep_params, 0, sizeof(adapter->sleep_params));
 	memset(&adapter->sleep_period, 0, sizeof(adapter->sleep_period));
-- 
cgit v1.2.3


From 9fcce61c0eddbe21f42cb47bd5a366a6eb7956ce Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Sun, 8 May 2011 20:30:31 +0200
Subject: ssb: update list of devices supporting multiple 80211 cores
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Some of the BCM43xx chips contain cores that are attached to the SSB, but are
inactive as they do not connect to the external environment. These must not be
registered. Several of these types are handled in driver ssb; however, the
specific case of an inactive 802.11 cores is now treated in b43 and b43legacy.
Although the current setup works, this minor change will place all such
workarounds in ssb, and simplify the code in drivers b43 and b43legacy.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/ssb/scan.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/ssb/scan.c b/drivers/ssb/scan.c
index 7dca719fbcf..45e5babd396 100644
--- a/drivers/ssb/scan.c
+++ b/drivers/ssb/scan.c
@@ -258,7 +258,10 @@ static int we_support_multiple_80211_cores(struct ssb_bus *bus)
 #ifdef CONFIG_SSB_PCIHOST
 	if (bus->bustype == SSB_BUSTYPE_PCI) {
 		if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
-		    bus->host_pci->device == 0x4324)
+		    ((bus->host_pci->device == 0x4313) ||
+		     (bus->host_pci->device == 0x431A) ||
+		     (bus->host_pci->device == 0x4321) ||
+		     (bus->host_pci->device == 0x4324)))
 			return 1;
 	}
 #endif /* CONFIG_SSB_PCIHOST */
-- 
cgit v1.2.3


From 0e4e06ae5e895864b4a4bca7eec2e3015fddca98 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 2 May 2011 16:49:14 -0700
Subject: libertas: Convert lbs_pr_<level> to pr_<level>

Use the standard pr_<level> functions eases grep a bit.

Added a few missing terminating newlines to messages.
Coalesced long formats.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/libertas/cfg.c     | 15 +++----
 drivers/net/wireless/libertas/cmd.c     | 36 ++++++++--------
 drivers/net/wireless/libertas/cmdresp.c | 29 +++++++------
 drivers/net/wireless/libertas/debugfs.c |  6 ++-
 drivers/net/wireless/libertas/defs.h    |  7 ----
 drivers/net/wireless/libertas/if_cs.c   | 52 ++++++++++++-----------
 drivers/net/wireless/libertas/if_sdio.c | 38 ++++++++---------
 drivers/net/wireless/libertas/if_spi.c  | 74 +++++++++++++++------------------
 drivers/net/wireless/libertas/if_usb.c  | 41 +++++++++---------
 drivers/net/wireless/libertas/main.c    | 31 +++++++-------
 drivers/net/wireless/libertas/mesh.c    |  8 ++--
 drivers/net/wireless/libertas/rx.c      |  7 +++-
 12 files changed, 173 insertions(+), 171 deletions(-)

diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
index f582dfd2927..73c5f54c9b4 100644
--- a/drivers/net/wireless/libertas/cfg.c
+++ b/drivers/net/wireless/libertas/cfg.c
@@ -6,6 +6,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/sched.h>
 #include <linux/wait.h>
 #include <linux/slab.h>
@@ -1322,8 +1324,7 @@ static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev,
 		sme->ssid, sme->ssid_len,
 		WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS);
 	if (!bss) {
-		lbs_pr_err("assoc: bss %pM not in scan results\n",
-			   sme->bssid);
+		pr_err("assoc: bss %pM not in scan results\n", sme->bssid);
 		ret = -ENOENT;
 		goto done;
 	}
@@ -1380,8 +1381,8 @@ static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev,
 		lbs_enable_rsn(priv, sme->crypto.cipher_group != 0);
 		break;
 	default:
-		lbs_pr_err("unsupported cipher group 0x%x\n",
-			   sme->crypto.cipher_group);
+		pr_err("unsupported cipher group 0x%x\n",
+		       sme->crypto.cipher_group);
 		ret = -ENOTSUPP;
 		goto done;
 	}
@@ -1499,7 +1500,7 @@ static int lbs_cfg_add_key(struct wiphy *wiphy, struct net_device *netdev,
 				     params->key, params->key_len);
 		break;
 	default:
-		lbs_pr_err("unhandled cipher 0x%x\n", params->cipher);
+		pr_err("unhandled cipher 0x%x\n", params->cipher);
 		ret = -ENOTSUPP;
 		break;
 	}
@@ -2127,13 +2128,13 @@ int lbs_cfg_register(struct lbs_private *priv)
 
 	ret = wiphy_register(wdev->wiphy);
 	if (ret < 0)
-		lbs_pr_err("cannot register wiphy device\n");
+		pr_err("cannot register wiphy device\n");
 
 	priv->wiphy_registered = true;
 
 	ret = register_netdev(priv->dev);
 	if (ret)
-		lbs_pr_err("cannot register network device\n");
+		pr_err("cannot register network device\n");
 
 	INIT_DELAYED_WORK(&priv->scan_work, lbs_scan_worker);
 
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 6a96fc9c1ce..af8ef90a122 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -3,6 +3,8 @@
  * It prepares command and sends it to firmware when it is ready.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kfifo.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
@@ -110,7 +112,7 @@ int lbs_update_hw_spec(struct lbs_private *priv)
 	 * CF card    firmware 5.0.16p0:   cap 0x00000303
 	 * USB dongle firmware 5.110.17p2: cap 0x00000303
 	 */
-	lbs_pr_info("%pM, fw %u.%u.%up%u, cap 0x%08x\n",
+	pr_info("%pM, fw %u.%u.%up%u, cap 0x%08x\n",
 		cmd.permanentaddr,
 		priv->fwrelease >> 24 & 0xff,
 		priv->fwrelease >> 16 & 0xff,
@@ -141,7 +143,7 @@ int lbs_update_hw_spec(struct lbs_private *priv)
 	/* if it's unidentified region code, use the default (USA) */
 	if (i >= MRVDRV_MAX_REGION_CODE) {
 		priv->regioncode = 0x10;
-		lbs_pr_info("unidentified region code; using the default (USA)\n");
+		pr_info("unidentified region code; using the default (USA)\n");
 	}
 
 	if (priv->current_addr[0] == 0xff)
@@ -211,7 +213,7 @@ int lbs_host_sleep_cfg(struct lbs_private *priv, uint32_t criteria,
 					(uint8_t *)&cmd_config.wol_conf,
 					sizeof(struct wol_config));
 	} else {
-		lbs_pr_info("HOST_SLEEP_CFG failed %d\n", ret);
+		pr_info("HOST_SLEEP_CFG failed %d\n", ret);
 	}
 
 	return ret;
@@ -314,7 +316,7 @@ static int lbs_wait_for_ds_awake(struct lbs_private *priv)
 	if (priv->is_deep_sleep) {
 		if (!wait_event_interruptible_timeout(priv->ds_awake_q,
 					!priv->is_deep_sleep, (10 * HZ))) {
-			lbs_pr_err("ds_awake_q: timer expired\n");
+			pr_err("ds_awake_q: timer expired\n");
 			ret = -1;
 		}
 	}
@@ -339,7 +341,7 @@ int lbs_set_deep_sleep(struct lbs_private *priv, int deep_sleep)
 				netif_carrier_off(priv->dev);
 			}
 		} else {
-			lbs_pr_err("deep sleep: already enabled\n");
+			pr_err("deep sleep: already enabled\n");
 		}
 	} else {
 		if (priv->is_deep_sleep) {
@@ -349,8 +351,7 @@ int lbs_set_deep_sleep(struct lbs_private *priv, int deep_sleep)
 			if (!ret) {
 				ret = lbs_wait_for_ds_awake(priv);
 				if (ret)
-					lbs_pr_err("deep sleep: wakeup"
-							"failed\n");
+					pr_err("deep sleep: wakeup failed\n");
 			}
 		}
 	}
@@ -384,8 +385,8 @@ int lbs_set_host_sleep(struct lbs_private *priv, int host_sleep)
 			ret = lbs_host_sleep_cfg(priv, priv->wol_criteria,
 					(struct wol_config *)NULL);
 			if (ret) {
-				lbs_pr_info("Host sleep configuration failed: "
-						"%d\n", ret);
+				pr_info("Host sleep configuration failed: %d\n",
+					ret);
 				return ret;
 			}
 			if (priv->psstate == PS_STATE_FULL_POWER) {
@@ -395,19 +396,19 @@ int lbs_set_host_sleep(struct lbs_private *priv, int host_sleep)
 						sizeof(cmd),
 						lbs_ret_host_sleep_activate, 0);
 				if (ret)
-					lbs_pr_info("HOST_SLEEP_ACTIVATE "
-							"failed: %d\n", ret);
+					pr_info("HOST_SLEEP_ACTIVATE failed: %d\n",
+						ret);
 			}
 
 			if (!wait_event_interruptible_timeout(
 						priv->host_sleep_q,
 						priv->is_host_sleep_activated,
 						(10 * HZ))) {
-				lbs_pr_err("host_sleep_q: timer expired\n");
+				pr_err("host_sleep_q: timer expired\n");
 				ret = -1;
 			}
 		} else {
-			lbs_pr_err("host sleep: already enabled\n");
+			pr_err("host sleep: already enabled\n");
 		}
 	} else {
 		if (priv->is_host_sleep_activated)
@@ -1007,7 +1008,7 @@ static void lbs_submit_command(struct lbs_private *priv,
 	ret = priv->hw_host_to_card(priv, MVMS_CMD, (u8 *) cmd, cmdsize);
 
 	if (ret) {
-		lbs_pr_info("DNLD_CMD: hw_host_to_card failed: %d\n", ret);
+		pr_info("DNLD_CMD: hw_host_to_card failed: %d\n", ret);
 		/* Let the timer kick in and retry, and potentially reset
 		   the whole thing if the condition persists */
 		timeo = HZ/4;
@@ -1276,7 +1277,7 @@ int lbs_execute_next_command(struct lbs_private *priv)
 	spin_lock_irqsave(&priv->driver_lock, flags);
 
 	if (priv->cur_cmd) {
-		lbs_pr_alert( "EXEC_NEXT_CMD: already processing command!\n");
+		pr_alert( "EXEC_NEXT_CMD: already processing command!\n");
 		spin_unlock_irqrestore(&priv->driver_lock, flags);
 		ret = -1;
 		goto done;
@@ -1438,7 +1439,7 @@ static void lbs_send_confirmsleep(struct lbs_private *priv)
 	ret = priv->hw_host_to_card(priv, MVMS_CMD, (u8 *) &confirm_sleep,
 		sizeof(confirm_sleep));
 	if (ret) {
-		lbs_pr_alert("confirm_sleep failed\n");
+		pr_alert("confirm_sleep failed\n");
 		goto out;
 	}
 
@@ -1664,8 +1665,7 @@ int __lbs_cmd(struct lbs_private *priv, uint16_t command,
 	spin_lock_irqsave(&priv->driver_lock, flags);
 	ret = cmdnode->result;
 	if (ret)
-		lbs_pr_info("PREP_CMD: command 0x%04x failed: %d\n",
-			    command, ret);
+		pr_info("PREP_CMD: command 0x%04x failed: %d\n", command, ret);
 
 	__lbs_cleanup_and_insert_cmd(priv, cmdnode);
 	spin_unlock_irqrestore(&priv->driver_lock, flags);
diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c
index 03e528994a9..45291a4c2a9 100644
--- a/drivers/net/wireless/libertas/cmdresp.c
+++ b/drivers/net/wireless/libertas/cmdresp.c
@@ -2,6 +2,9 @@
  * This file contains the handling of command
  * responses as well as events generated by firmware.
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/sched.h>
@@ -85,15 +88,17 @@ int lbs_process_command_response(struct lbs_private *priv, u8 *data, u32 len)
 	lbs_deb_hex(LBS_DEB_CMD, "CMD_RESP", (void *) resp, len);
 
 	if (resp->seqnum != priv->cur_cmd->cmdbuf->seqnum) {
-		lbs_pr_info("Received CMD_RESP with invalid sequence %d (expected %d)\n",
-			    le16_to_cpu(resp->seqnum), le16_to_cpu(priv->cur_cmd->cmdbuf->seqnum));
+		pr_info("Received CMD_RESP with invalid sequence %d (expected %d)\n",
+			le16_to_cpu(resp->seqnum),
+			le16_to_cpu(priv->cur_cmd->cmdbuf->seqnum));
 		spin_unlock_irqrestore(&priv->driver_lock, flags);
 		ret = -1;
 		goto done;
 	}
 	if (respcmd != CMD_RET(curcmd) &&
 	    respcmd != CMD_RET_802_11_ASSOCIATE && curcmd != CMD_802_11_ASSOCIATE) {
-		lbs_pr_info("Invalid CMD_RESP %x to command %x!\n", respcmd, curcmd);
+		pr_info("Invalid CMD_RESP %x to command %x!\n",
+			respcmd, curcmd);
 		spin_unlock_irqrestore(&priv->driver_lock, flags);
 		ret = -1;
 		goto done;
@@ -102,8 +107,8 @@ int lbs_process_command_response(struct lbs_private *priv, u8 *data, u32 len)
 	if (resp->result == cpu_to_le16(0x0004)) {
 		/* 0x0004 means -EAGAIN. Drop the response, let it time out
 		   and be resubmitted */
-		lbs_pr_info("Firmware returns DEFER to command %x. Will let it time out...\n",
-			    le16_to_cpu(resp->command));
+		pr_info("Firmware returns DEFER to command %x. Will let it time out...\n",
+			le16_to_cpu(resp->command));
 		spin_unlock_irqrestore(&priv->driver_lock, flags);
 		ret = -1;
 		goto done;
@@ -314,28 +319,28 @@ int lbs_process_event(struct lbs_private *priv, u32 event)
 		lbs_deb_cmd("EVENT: ADHOC beacon lost\n");
 		break;
 	case MACREG_INT_CODE_RSSI_LOW:
-		lbs_pr_alert("EVENT: rssi low\n");
+		pr_alert("EVENT: rssi low\n");
 		break;
 	case MACREG_INT_CODE_SNR_LOW:
-		lbs_pr_alert("EVENT: snr low\n");
+		pr_alert("EVENT: snr low\n");
 		break;
 	case MACREG_INT_CODE_MAX_FAIL:
-		lbs_pr_alert("EVENT: max fail\n");
+		pr_alert("EVENT: max fail\n");
 		break;
 	case MACREG_INT_CODE_RSSI_HIGH:
-		lbs_pr_alert("EVENT: rssi high\n");
+		pr_alert("EVENT: rssi high\n");
 		break;
 	case MACREG_INT_CODE_SNR_HIGH:
-		lbs_pr_alert("EVENT: snr high\n");
+		pr_alert("EVENT: snr high\n");
 		break;
 
 	case MACREG_INT_CODE_MESH_AUTO_STARTED:
 		/* Ignore spurious autostart events */
-		lbs_pr_info("EVENT: MESH_AUTO_STARTED (ignoring)\n");
+		pr_info("EVENT: MESH_AUTO_STARTED (ignoring)\n");
 		break;
 
 	default:
-		lbs_pr_alert("EVENT: unknown event id %d\n", event);
+		pr_alert("EVENT: unknown event id %d\n", event);
 		break;
 	}
 
diff --git a/drivers/net/wireless/libertas/debugfs.c b/drivers/net/wireless/libertas/debugfs.c
index 851fe7bd4ba..0bd79c5f5b5 100644
--- a/drivers/net/wireless/libertas/debugfs.c
+++ b/drivers/net/wireless/libertas/debugfs.c
@@ -1,3 +1,5 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/dcache.h>
 #include <linux/debugfs.h>
 #include <linux/delay.h>
@@ -151,13 +153,13 @@ static ssize_t lbs_host_sleep_write(struct file *file,
 		ret = lbs_set_host_sleep(priv, 0);
 	else if (host_sleep == 1) {
 		if (priv->wol_criteria == EHS_REMOVE_WAKEUP) {
-			lbs_pr_info("wake parameters not configured");
+			pr_info("wake parameters not configured\n");
 			ret = -EINVAL;
 			goto out_unlock;
 		}
 		ret = lbs_set_host_sleep(priv, 1);
 	} else {
-		lbs_pr_err("invalid option\n");
+		pr_err("invalid option\n");
 		ret = -EINVAL;
 	}
 
diff --git a/drivers/net/wireless/libertas/defs.h b/drivers/net/wireless/libertas/defs.h
index 92b5b1f8fd7..ab966f08024 100644
--- a/drivers/net/wireless/libertas/defs.h
+++ b/drivers/net/wireless/libertas/defs.h
@@ -89,13 +89,6 @@ do { if ((lbs_debug & (grp)) == (grp)) \
 #define lbs_deb_spi(fmt, args...)       LBS_DEB_LL(LBS_DEB_SPI, " spi", fmt, ##args)
 #define lbs_deb_cfg80211(fmt, args...)  LBS_DEB_LL(LBS_DEB_CFG80211, " cfg80211", fmt, ##args)
 
-#define lbs_pr_info(format, args...) \
-	printk(KERN_INFO DRV_NAME": " format, ## args)
-#define lbs_pr_err(format, args...) \
-	printk(KERN_ERR DRV_NAME": " format, ## args)
-#define lbs_pr_alert(format, args...) \
-	printk(KERN_ALERT DRV_NAME": " format, ## args)
-
 #ifdef DEBUG
 static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, int len)
 {
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 4dfd48fe8b6..f2d10115f5e 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -21,6 +21,8 @@
 
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
@@ -362,7 +364,7 @@ static int if_cs_send_cmd(struct lbs_private *priv, u8 *buf, u16 nb)
 		if (status & IF_CS_BIT_COMMAND)
 			break;
 		if (++loops > 100) {
-			lbs_pr_err("card not ready for commands\n");
+			pr_err("card not ready for commands\n");
 			goto done;
 		}
 		mdelay(1);
@@ -432,14 +434,14 @@ static int if_cs_receive_cmdres(struct lbs_private *priv, u8 *data, u32 *len)
 	/* is hardware ready? */
 	status = if_cs_read16(priv->card, IF_CS_CARD_STATUS);
 	if ((status & IF_CS_BIT_RESP) == 0) {
-		lbs_pr_err("no cmd response in card\n");
+		pr_err("no cmd response in card\n");
 		*len = 0;
 		goto out;
 	}
 
 	*len = if_cs_read16(priv->card, IF_CS_RESP_LEN);
 	if ((*len == 0) || (*len > LBS_CMD_BUFFER_SIZE)) {
-		lbs_pr_err("card cmd buffer has invalid # of bytes (%d)\n", *len);
+		pr_err("card cmd buffer has invalid # of bytes (%d)\n", *len);
 		goto out;
 	}
 
@@ -473,7 +475,7 @@ static struct sk_buff *if_cs_receive_data(struct lbs_private *priv)
 
 	len = if_cs_read16(priv->card, IF_CS_READ_LEN);
 	if (len == 0 || len > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
-		lbs_pr_err("card data buffer has invalid # of bytes (%d)\n", len);
+		pr_err("card data buffer has invalid # of bytes (%d)\n", len);
 		priv->dev->stats.rx_dropped++;
 		goto dat_err;
 	}
@@ -653,8 +655,8 @@ static int if_cs_prog_helper(struct if_cs_card *card, const struct firmware *fw)
 		ret = if_cs_poll_while_fw_download(card, IF_CS_CARD_STATUS,
 			IF_CS_BIT_COMMAND);
 		if (ret < 0) {
-			lbs_pr_err("can't download helper at 0x%x, ret %d\n",
-				sent, ret);
+			pr_err("can't download helper at 0x%x, ret %d\n",
+			       sent, ret);
 			goto done;
 		}
 
@@ -684,7 +686,7 @@ static int if_cs_prog_real(struct if_cs_card *card, const struct firmware *fw)
 	ret = if_cs_poll_while_fw_download(card, IF_CS_SQ_READ_LOW,
 		IF_CS_SQ_HELPER_OK);
 	if (ret < 0) {
-		lbs_pr_err("helper firmware doesn't answer\n");
+		pr_err("helper firmware doesn't answer\n");
 		goto done;
 	}
 
@@ -692,13 +694,13 @@ static int if_cs_prog_real(struct if_cs_card *card, const struct firmware *fw)
 		len = if_cs_read16(card, IF_CS_SQ_READ_LOW);
 		if (len & 1) {
 			retry++;
-			lbs_pr_info("odd, need to retry this firmware block\n");
+			pr_info("odd, need to retry this firmware block\n");
 		} else {
 			retry = 0;
 		}
 
 		if (retry > 20) {
-			lbs_pr_err("could not download firmware\n");
+			pr_err("could not download firmware\n");
 			ret = -ENODEV;
 			goto done;
 		}
@@ -718,14 +720,14 @@ static int if_cs_prog_real(struct if_cs_card *card, const struct firmware *fw)
 		ret = if_cs_poll_while_fw_download(card, IF_CS_CARD_STATUS,
 			IF_CS_BIT_COMMAND);
 		if (ret < 0) {
-			lbs_pr_err("can't download firmware at 0x%x\n", sent);
+			pr_err("can't download firmware at 0x%x\n", sent);
 			goto done;
 		}
 	}
 
 	ret = if_cs_poll_while_fw_download(card, IF_CS_SCRATCH, 0x5a);
 	if (ret < 0)
-		lbs_pr_err("firmware download failed\n");
+		pr_err("firmware download failed\n");
 
 done:
 	lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
@@ -759,7 +761,7 @@ static int if_cs_host_to_card(struct lbs_private *priv,
 		ret = if_cs_send_cmd(priv, buf, nb);
 		break;
 	default:
-		lbs_pr_err("%s: unsupported type %d\n", __func__, type);
+		pr_err("%s: unsupported type %d\n", __func__, type);
 	}
 
 	lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
@@ -788,7 +790,7 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev, void *priv_data)
 	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 
 	if (p_dev->resource[1]->end) {
-		lbs_pr_err("wrong CIS (check number of IO windows)\n");
+		pr_err("wrong CIS (check number of IO windows)\n");
 		return -ENODEV;
 	}
 
@@ -809,7 +811,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 
 	card = kzalloc(sizeof(struct if_cs_card), GFP_KERNEL);
 	if (!card) {
-		lbs_pr_err("error in kzalloc\n");
+		pr_err("error in kzalloc\n");
 		goto out;
 	}
 	card->p_dev = p_dev;
@@ -818,7 +820,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 	p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
 
 	if (pcmcia_loop_config(p_dev, if_cs_ioprobe, NULL)) {
-		lbs_pr_err("error in pcmcia_loop_config\n");
+		pr_err("error in pcmcia_loop_config\n");
 		goto out1;
 	}
 
@@ -834,14 +836,14 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 	card->iobase = ioport_map(p_dev->resource[0]->start,
 				resource_size(p_dev->resource[0]));
 	if (!card->iobase) {
-		lbs_pr_err("error in ioport_map\n");
+		pr_err("error in ioport_map\n");
 		ret = -EIO;
 		goto out1;
 	}
 
 	ret = pcmcia_enable_device(p_dev);
 	if (ret) {
-		lbs_pr_err("error in pcmcia_enable_device\n");
+		pr_err("error in pcmcia_enable_device\n");
 		goto out2;
 	}
 
@@ -856,8 +858,8 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 
 	card->model = get_model(p_dev->manf_id, p_dev->card_id);
 	if (card->model == MODEL_UNKNOWN) {
-		lbs_pr_err("unsupported manf_id 0x%04x / card_id 0x%04x\n",
-			   p_dev->manf_id, p_dev->card_id);
+		pr_err("unsupported manf_id 0x%04x / card_id 0x%04x\n",
+		       p_dev->manf_id, p_dev->card_id);
 		goto out2;
 	}
 
@@ -866,20 +868,20 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 	if (card->model == MODEL_8305) {
 		card->align_regs = 1;
 		if (prod_id < IF_CS_CF8305_B1_REV) {
-			lbs_pr_err("8305 rev B0 and older are not supported\n");
+			pr_err("8305 rev B0 and older are not supported\n");
 			ret = -ENODEV;
 			goto out2;
 		}
 	}
 
 	if ((card->model == MODEL_8381) && prod_id < IF_CS_CF8381_B3_REV) {
-		lbs_pr_err("8381 rev B2 and older are not supported\n");
+		pr_err("8381 rev B2 and older are not supported\n");
 		ret = -ENODEV;
 		goto out2;
 	}
 
 	if ((card->model == MODEL_8385) && prod_id < IF_CS_CF8385_B1_REV) {
-		lbs_pr_err("8385 rev B0 and older are not supported\n");
+		pr_err("8385 rev B0 and older are not supported\n");
 		ret = -ENODEV;
 		goto out2;
 	}
@@ -887,7 +889,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 	ret = lbs_get_firmware(&p_dev->dev, NULL, NULL, card->model,
 				&fw_table[0], &helper, &mainfw);
 	if (ret) {
-		lbs_pr_err("failed to find firmware (%d)\n", ret);
+		pr_err("failed to find firmware (%d)\n", ret);
 		goto out2;
 	}
 
@@ -918,7 +920,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 	ret = request_irq(p_dev->irq, if_cs_interrupt,
 		IRQF_SHARED, DRV_NAME, card);
 	if (ret) {
-		lbs_pr_err("error in request_irq\n");
+		pr_err("error in request_irq\n");
 		goto out3;
 	}
 
@@ -931,7 +933,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 
 	/* And finally bring the card up */
 	if (lbs_start_card(priv) != 0) {
-		lbs_pr_err("could not activate card\n");
+		pr_err("could not activate card\n");
 		goto out3;
 	}
 
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index b4de0ca10fe..ab867795f54 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -26,6 +26,8 @@
  * if_sdio_card_to_host() to pad the data.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/moduleparam.h>
 #include <linux/slab.h>
@@ -409,7 +411,7 @@ static int if_sdio_card_to_host(struct if_sdio_card *card)
 
 out:
 	if (ret)
-		lbs_pr_err("problem fetching packet from firmware\n");
+		pr_err("problem fetching packet from firmware\n");
 
 	lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
 
@@ -446,7 +448,7 @@ static void if_sdio_host_to_card_worker(struct work_struct *work)
 		}
 
 		if (ret)
-			lbs_pr_err("error %d sending packet to firmware\n", ret);
+			pr_err("error %d sending packet to firmware\n", ret);
 
 		sdio_release_host(card->func);
 
@@ -555,7 +557,7 @@ release:
 
 out:
 	if (ret)
-		lbs_pr_err("failed to load helper firmware\n");
+		pr_err("failed to load helper firmware\n");
 
 	lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
 	return ret;
@@ -669,7 +671,7 @@ release:
 
 out:
 	if (ret)
-		lbs_pr_err("failed to load firmware\n");
+		pr_err("failed to load firmware\n");
 
 	lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
 	return ret;
@@ -723,7 +725,7 @@ static int if_sdio_prog_firmware(struct if_sdio_card *card)
 	ret = lbs_get_firmware(&card->func->dev, lbs_helper_name, lbs_fw_name,
 				card->model, &fw_table[0], &helper, &mainfw);
 	if (ret) {
-		lbs_pr_err("failed to find firmware (%d)\n", ret);
+		pr_err("failed to find firmware (%d)\n", ret);
 		goto out;
 	}
 
@@ -849,7 +851,7 @@ static int if_sdio_enter_deep_sleep(struct lbs_private *priv)
 	ret = __lbs_cmd(priv, CMD_802_11_DEEP_SLEEP, &cmd, sizeof(cmd),
 			lbs_cmd_copyback, (unsigned long) &cmd);
 	if (ret)
-		lbs_pr_err("DEEP_SLEEP cmd failed\n");
+		pr_err("DEEP_SLEEP cmd failed\n");
 
 	mdelay(200);
 	return ret;
@@ -865,7 +867,7 @@ static int if_sdio_exit_deep_sleep(struct lbs_private *priv)
 
 	sdio_writeb(card->func, HOST_POWER_UP, CONFIGURATION_REG, &ret);
 	if (ret)
-		lbs_pr_err("sdio_writeb failed!\n");
+		pr_err("sdio_writeb failed!\n");
 
 	sdio_release_host(card->func);
 	lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
@@ -882,7 +884,7 @@ static int if_sdio_reset_deep_sleep_wakeup(struct lbs_private *priv)
 
 	sdio_writeb(card->func, 0, CONFIGURATION_REG, &ret);
 	if (ret)
-		lbs_pr_err("sdio_writeb failed!\n");
+		pr_err("sdio_writeb failed!\n");
 
 	sdio_release_host(card->func);
 	lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
@@ -961,7 +963,7 @@ static int if_sdio_probe(struct sdio_func *func,
 	}
 
 	if (i == func->card->num_info) {
-		lbs_pr_err("unable to identify card model\n");
+		pr_err("unable to identify card model\n");
 		return -ENODEV;
 	}
 
@@ -995,7 +997,7 @@ static int if_sdio_probe(struct sdio_func *func,
 			break;
 	}
 	if (i == ARRAY_SIZE(fw_table)) {
-		lbs_pr_err("unknown card model 0x%x\n", card->model);
+		pr_err("unknown card model 0x%x\n", card->model);
 		ret = -ENODEV;
 		goto free;
 	}
@@ -1101,7 +1103,7 @@ static int if_sdio_probe(struct sdio_func *func,
 		lbs_deb_sdio("send function INIT command\n");
 		if (__lbs_cmd(priv, CMD_FUNC_INIT, &cmd, sizeof(cmd),
 				lbs_cmd_copyback, (unsigned long) &cmd))
-			lbs_pr_alert("CMD_FUNC_INIT cmd failed\n");
+			pr_alert("CMD_FUNC_INIT cmd failed\n");
 	}
 
 	ret = lbs_start_card(priv);
@@ -1163,7 +1165,7 @@ static void if_sdio_remove(struct sdio_func *func)
 		if (__lbs_cmd(card->priv, CMD_FUNC_SHUTDOWN,
 				&cmd, sizeof(cmd), lbs_cmd_copyback,
 				(unsigned long) &cmd))
-			lbs_pr_alert("CMD_FUNC_SHUTDOWN cmd failed\n");
+			pr_alert("CMD_FUNC_SHUTDOWN cmd failed\n");
 	}
 
 
@@ -1202,21 +1204,19 @@ static int if_sdio_suspend(struct device *dev)
 
 	mmc_pm_flag_t flags = sdio_get_host_pm_caps(func);
 
-	lbs_pr_info("%s: suspend: PM flags = 0x%x\n",
-						sdio_func_id(func), flags);
+	pr_info("%s: suspend: PM flags = 0x%x\n", sdio_func_id(func), flags);
 
 	/* If we aren't being asked to wake on anything, we should bail out
 	 * and let the SD stack power down the card.
 	 */
 	if (card->priv->wol_criteria == EHS_REMOVE_WAKEUP) {
-		lbs_pr_info("Suspend without wake params -- "
-						"powering down card.");
+		pr_info("Suspend without wake params -- powering down card\n");
 		return -ENOSYS;
 	}
 
 	if (!(flags & MMC_PM_KEEP_POWER)) {
-		lbs_pr_err("%s: cannot remain alive while host is suspended\n",
-			sdio_func_id(func));
+		pr_err("%s: cannot remain alive while host is suspended\n",
+		       sdio_func_id(func));
 		return -ENOSYS;
 	}
 
@@ -1237,7 +1237,7 @@ static int if_sdio_resume(struct device *dev)
 	struct if_sdio_card *card = sdio_get_drvdata(func);
 	int ret;
 
-	lbs_pr_info("%s: resume: we're back\n", sdio_func_id(func));
+	pr_info("%s: resume: we're back\n", sdio_func_id(func));
 
 	ret = lbs_resume(card->priv);
 
diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c
index 67de5b3c68b..4d19b5726c1 100644
--- a/drivers/net/wireless/libertas/if_spi.c
+++ b/drivers/net/wireless/libertas/if_spi.c
@@ -17,6 +17,8 @@
  * (at your option) any later version.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/moduleparam.h>
 #include <linux/firmware.h>
 #include <linux/jiffies.h>
@@ -305,8 +307,7 @@ static int spu_wait_for_u16(struct if_spi_card *card, u16 reg,
 		}
 		udelay(100);
 		if (time_after(jiffies, timeout)) {
-			lbs_pr_err("%s: timeout with val=%02x, "
-			       "target_mask=%02x, target=%02x\n",
+			pr_err("%s: timeout with val=%02x, target_mask=%02x, target=%02x\n",
 			       __func__, val, target_mask, target);
 			return -ETIMEDOUT;
 		}
@@ -405,7 +406,7 @@ static int spu_set_bus_mode(struct if_spi_card *card, u16 mode)
 	if (err)
 		return err;
 	if ((rval & 0xF) != mode) {
-		lbs_pr_err("Can't read bus mode register.\n");
+		pr_err("Can't read bus mode register\n");
 		return -EIO;
 	}
 	return 0;
@@ -534,7 +535,7 @@ static int if_spi_prog_helper_firmware(struct if_spi_card *card,
 
 out:
 	if (err)
-		lbs_pr_err("failed to load helper firmware (err=%d)\n", err);
+		pr_err("failed to load helper firmware (err=%d)\n", err);
 	lbs_deb_leave_args(LBS_DEB_SPI, "err %d", err);
 	return err;
 }
@@ -557,7 +558,7 @@ static int if_spi_prog_main_firmware_check_len(struct if_spi_card *card,
 				IF_SPI_HIST_CMD_DOWNLOAD_RDY,
 				IF_SPI_HIST_CMD_DOWNLOAD_RDY);
 	if (err) {
-		lbs_pr_err("timed out waiting for host_int_status\n");
+		pr_err("timed out waiting for host_int_status\n");
 		return err;
 	}
 
@@ -567,9 +568,8 @@ static int if_spi_prog_main_firmware_check_len(struct if_spi_card *card,
 		return err;
 
 	if (len > IF_SPI_CMD_BUF_SIZE) {
-		lbs_pr_err("firmware load device requested a larger "
-			   "tranfer than we are prepared to "
-			   "handle. (len = %d)\n", len);
+		pr_err("firmware load device requested a larger transfer than we are prepared to handle (len = %d)\n",
+		       len);
 		return -EIO;
 	}
 	if (len & 0x1) {
@@ -598,8 +598,8 @@ static int if_spi_prog_main_firmware(struct if_spi_card *card,
 
 	err = spu_wait_for_u16(card, IF_SPI_SCRATCH_1_REG, 0, 0);
 	if (err) {
-		lbs_pr_err("%s: timed out waiting for initial "
-			   "scratch reg = 0\n", __func__);
+		pr_err("%s: timed out waiting for initial scratch reg = 0\n",
+		       __func__);
 		goto out;
 	}
 
@@ -617,15 +617,13 @@ static int if_spi_prog_main_firmware(struct if_spi_card *card,
 			 * If there are no more bytes left, we would normally
 			 * expect to have terminated with len = 0
 			 */
-			lbs_pr_err("Firmware load wants more bytes "
-				   "than we have to offer.\n");
+			pr_err("Firmware load wants more bytes than we have to offer.\n");
 			break;
 		}
 		if (crc_err) {
 			/* Previous transfer failed. */
 			if (++num_crc_errs > MAX_MAIN_FW_LOAD_CRC_ERR) {
-				lbs_pr_err("Too many CRC errors encountered "
-					   "in firmware load.\n");
+				pr_err("Too many CRC errors encountered in firmware load.\n");
 				err = -EIO;
 				goto out;
 			}
@@ -654,21 +652,20 @@ static int if_spi_prog_main_firmware(struct if_spi_card *card,
 		prev_len = len;
 	}
 	if (bytes > prev_len) {
-		lbs_pr_err("firmware load wants fewer bytes than "
-			   "we have to offer.\n");
+		pr_err("firmware load wants fewer bytes than we have to offer\n");
 	}
 
 	/* Confirm firmware download */
 	err = spu_wait_for_u32(card, IF_SPI_SCRATCH_4_REG,
 					SUCCESSFUL_FW_DOWNLOAD_MAGIC);
 	if (err) {
-		lbs_pr_err("failed to confirm the firmware download\n");
+		pr_err("failed to confirm the firmware download\n");
 		goto out;
 	}
 
 out:
 	if (err)
-		lbs_pr_err("failed to load firmware (err=%d)\n", err);
+		pr_err("failed to load firmware (err=%d)\n", err);
 	lbs_deb_leave_args(LBS_DEB_SPI, "err %d", err);
 	return err;
 }
@@ -709,14 +706,12 @@ static int if_spi_c2h_cmd(struct if_spi_card *card)
 	if (err)
 		goto out;
 	if (!len) {
-		lbs_pr_err("%s: error: card has no data for host\n",
-			   __func__);
+		pr_err("%s: error: card has no data for host\n", __func__);
 		err = -EINVAL;
 		goto out;
 	} else if (len > IF_SPI_CMD_BUF_SIZE) {
-		lbs_pr_err("%s: error: response packet too large: "
-			   "%d bytes, but maximum is %d\n",
-			   __func__, len, IF_SPI_CMD_BUF_SIZE);
+		pr_err("%s: error: response packet too large: %d bytes, but maximum is %d\n",
+		       __func__, len, IF_SPI_CMD_BUF_SIZE);
 		err = -EINVAL;
 		goto out;
 	}
@@ -737,7 +732,7 @@ static int if_spi_c2h_cmd(struct if_spi_card *card)
 
 out:
 	if (err)
-		lbs_pr_err("%s: err=%d\n", __func__, err);
+		pr_err("%s: err=%d\n", __func__, err);
 	lbs_deb_leave(LBS_DEB_SPI);
 	return err;
 }
@@ -757,14 +752,12 @@ static int if_spi_c2h_data(struct if_spi_card *card)
 	if (err)
 		goto out;
 	if (!len) {
-		lbs_pr_err("%s: error: card has no data for host\n",
-			   __func__);
+		pr_err("%s: error: card has no data for host\n", __func__);
 		err = -EINVAL;
 		goto out;
 	} else if (len > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
-		lbs_pr_err("%s: error: card has %d bytes of data, but "
-			   "our maximum skb size is %zu\n",
-			   __func__, len, MRVDRV_ETH_RX_PACKET_BUFFER_SIZE);
+		pr_err("%s: error: card has %d bytes of data, but our maximum skb size is %zu\n",
+		       __func__, len, MRVDRV_ETH_RX_PACKET_BUFFER_SIZE);
 		err = -EINVAL;
 		goto out;
 	}
@@ -795,7 +788,7 @@ free_skb:
 	dev_kfree_skb(skb);
 out:
 	if (err)
-		lbs_pr_err("%s: err=%d\n", __func__, err);
+		pr_err("%s: err=%d\n", __func__, err);
 	lbs_deb_leave(LBS_DEB_SPI);
 	return err;
 }
@@ -817,7 +810,7 @@ static void if_spi_h2c(struct if_spi_card *card,
 		port_reg = IF_SPI_CMD_RDWRPORT_REG;
 		break;
 	default:
-		lbs_pr_err("can't transfer buffer of type %d\n", type);
+		pr_err("can't transfer buffer of type %d\n", type);
 		err = -EINVAL;
 		goto out;
 	}
@@ -831,7 +824,7 @@ out:
 	kfree(packet);
 
 	if (err)
-		lbs_pr_err("%s: error %d\n", __func__, err);
+		pr_err("%s: error %d\n", __func__, err);
 }
 
 /* Inform the host about a card event */
@@ -855,7 +848,7 @@ static void if_spi_e2h(struct if_spi_card *card)
 	lbs_queue_event(priv, cause & 0xff);
 out:
 	if (err)
-		lbs_pr_err("%s: error %d\n", __func__, err);
+		pr_err("%s: error %d\n", __func__, err);
 }
 
 static void if_spi_host_to_card_worker(struct work_struct *work)
@@ -877,7 +870,7 @@ static void if_spi_host_to_card_worker(struct work_struct *work)
 	err = spu_read_u16(card, IF_SPI_HOST_INT_STATUS_REG,
 				&hiStatus);
 	if (err) {
-		lbs_pr_err("I/O error\n");
+		pr_err("I/O error\n");
 		goto err;
 	}
 
@@ -940,7 +933,7 @@ static void if_spi_host_to_card_worker(struct work_struct *work)
 
 err:
 	if (err)
-		lbs_pr_err("%s: got error %d\n", __func__, err);
+		pr_err("%s: got error %d\n", __func__, err);
 
 	lbs_deb_leave(LBS_DEB_SPI);
 }
@@ -963,7 +956,7 @@ static int if_spi_host_to_card(struct lbs_private *priv,
 	lbs_deb_enter_args(LBS_DEB_SPI, "type %d, bytes %d", type, nb);
 
 	if (nb == 0) {
-		lbs_pr_err("%s: invalid size requested: %d\n", __func__, nb);
+		pr_err("%s: invalid size requested: %d\n", __func__, nb);
 		err = -EINVAL;
 		goto out;
 	}
@@ -991,7 +984,7 @@ static int if_spi_host_to_card(struct lbs_private *priv,
 		spin_unlock_irqrestore(&card->buffer_lock, flags);
 		break;
 	default:
-		lbs_pr_err("can't transfer buffer of type %d", type);
+		pr_err("can't transfer buffer of type %d\n", type);
 		err = -EINVAL;
 		break;
 	}
@@ -1052,8 +1045,7 @@ static int if_spi_init_card(struct if_spi_card *card)
 				break;
 		}
 		if (i == ARRAY_SIZE(fw_table)) {
-			lbs_pr_err("Unsupported chip_id: 0x%02x\n",
-					card->card_id);
+			pr_err("Unsupported chip_id: 0x%02x\n", card->card_id);
 			err = -ENODEV;
 			goto out;
 		}
@@ -1062,7 +1054,7 @@ static int if_spi_init_card(struct if_spi_card *card)
 					card->card_id, &fw_table[0], &helper,
 					&mainfw);
 		if (err) {
-			lbs_pr_err("failed to find firmware (%d)\n", err);
+			pr_err("failed to find firmware (%d)\n", err);
 			goto out;
 		}
 
@@ -1187,7 +1179,7 @@ static int __devinit if_spi_probe(struct spi_device *spi)
 	err = request_irq(spi->irq, if_spi_host_interrupt,
 			IRQF_TRIGGER_FALLING, "libertas_spi", card);
 	if (err) {
-		lbs_pr_err("can't get host irq line-- request_irq failed\n");
+		pr_err("can't get host irq line-- request_irq failed\n");
 		goto terminate_workqueue;
 	}
 
diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c
index e1e2128f411..b68e162bc32 100644
--- a/drivers/net/wireless/libertas/if_usb.c
+++ b/drivers/net/wireless/libertas/if_usb.c
@@ -1,6 +1,9 @@
 /*
  * This file contains functions used in USB interface module.
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/delay.h>
 #include <linux/moduleparam.h>
 #include <linux/firmware.h>
@@ -153,7 +156,7 @@ static void if_usb_write_bulk_callback(struct urb *urb)
 			lbs_host_to_card_done(priv);
 	} else {
 		/* print the failure status number for debug */
-		lbs_pr_info("URB in failure status: %d\n", urb->status);
+		pr_info("URB in failure status: %d\n", urb->status);
 	}
 }
 
@@ -203,7 +206,7 @@ static void if_usb_setup_firmware(struct lbs_private *priv)
 	wake_method.hdr.size = cpu_to_le16(sizeof(wake_method));
 	wake_method.action = cpu_to_le16(CMD_ACT_GET);
 	if (lbs_cmd_with_response(priv, CMD_802_11_FW_WAKE_METHOD, &wake_method)) {
-		lbs_pr_info("Firmware does not seem to support PS mode\n");
+		pr_info("Firmware does not seem to support PS mode\n");
 		priv->fwcapinfo &= ~FW_CAPINFO_PS;
 	} else {
 		if (le16_to_cpu(wake_method.method) == CMD_WAKE_METHOD_COMMAND_INT) {
@@ -212,7 +215,7 @@ static void if_usb_setup_firmware(struct lbs_private *priv)
 			/* The versions which boot up this way don't seem to
 			   work even if we set it to the command interrupt */
 			priv->fwcapinfo &= ~FW_CAPINFO_PS;
-			lbs_pr_info("Firmware doesn't wake via command interrupt; disabling PS mode\n");
+			pr_info("Firmware doesn't wake via command interrupt; disabling PS mode\n");
 		}
 	}
 }
@@ -224,7 +227,7 @@ static void if_usb_fw_timeo(unsigned long priv)
 	if (cardp->fwdnldover) {
 		lbs_deb_usb("Download complete, no event. Assuming success\n");
 	} else {
-		lbs_pr_err("Download timed out\n");
+		pr_err("Download timed out\n");
 		cardp->surprise_removed = 1;
 	}
 	wake_up(&cardp->fw_wq);
@@ -258,7 +261,7 @@ static int if_usb_probe(struct usb_interface *intf,
 
 	cardp = kzalloc(sizeof(struct if_usb_card), GFP_KERNEL);
 	if (!cardp) {
-		lbs_pr_err("Out of memory allocating private data.\n");
+		pr_err("Out of memory allocating private data\n");
 		goto error;
 	}
 
@@ -348,10 +351,10 @@ static int if_usb_probe(struct usb_interface *intf,
 	usb_set_intfdata(intf, cardp);
 
 	if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_fw))
-		lbs_pr_err("cannot register lbs_flash_fw attribute\n");
+		pr_err("cannot register lbs_flash_fw attribute\n");
 
 	if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_boot2))
-		lbs_pr_err("cannot register lbs_flash_boot2 attribute\n");
+		pr_err("cannot register lbs_flash_boot2 attribute\n");
 
 	/*
 	 * EHS_REMOVE_WAKEUP is not supported on all versions of the firmware.
@@ -536,7 +539,7 @@ static int __if_usb_submit_rx_urb(struct if_usb_card *cardp,
 	int ret = -1;
 
 	if (!(skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE))) {
-		lbs_pr_err("No free skb\n");
+		pr_err("No free skb\n");
 		goto rx_ret;
 	}
 
@@ -595,7 +598,7 @@ static void if_usb_receive_fwload(struct urb *urb)
 
 		if (tmp[0] == cpu_to_le32(CMD_TYPE_INDICATION) &&
 		    tmp[1] == cpu_to_le32(MACREG_INT_CODE_FIRMWARE_READY)) {
-			lbs_pr_info("Firmware ready event received\n");
+			pr_info("Firmware ready event received\n");
 			wake_up(&cardp->fw_wq);
 		} else {
 			lbs_deb_usb("Waiting for confirmation; got %x %x\n",
@@ -622,20 +625,20 @@ static void if_usb_receive_fwload(struct urb *urb)
 			    bootcmdresp.magic == cpu_to_le32(CMD_TYPE_DATA) ||
 			    bootcmdresp.magic == cpu_to_le32(CMD_TYPE_INDICATION)) {
 				if (!cardp->bootcmdresp)
-					lbs_pr_info("Firmware already seems alive; resetting\n");
+					pr_info("Firmware already seems alive; resetting\n");
 				cardp->bootcmdresp = -1;
 			} else {
-				lbs_pr_info("boot cmd response wrong magic number (0x%x)\n",
+				pr_info("boot cmd response wrong magic number (0x%x)\n",
 					    le32_to_cpu(bootcmdresp.magic));
 			}
 		} else if ((bootcmdresp.cmd != BOOT_CMD_FW_BY_USB) &&
 			   (bootcmdresp.cmd != BOOT_CMD_UPDATE_FW) &&
 			   (bootcmdresp.cmd != BOOT_CMD_UPDATE_BOOT2)) {
-			lbs_pr_info("boot cmd response cmd_tag error (%d)\n",
-				    bootcmdresp.cmd);
+			pr_info("boot cmd response cmd_tag error (%d)\n",
+				bootcmdresp.cmd);
 		} else if (bootcmdresp.result != BOOT_CMD_RESP_OK) {
-			lbs_pr_info("boot cmd response result error (%d)\n",
-				    bootcmdresp.result);
+			pr_info("boot cmd response result error (%d)\n",
+				bootcmdresp.result);
 		} else {
 			cardp->bootcmdresp = 1;
 			lbs_deb_usbd(&cardp->udev->dev,
@@ -901,7 +904,7 @@ static int check_fwfile_format(const uint8_t *data, uint32_t totlen)
 	} while (!exit);
 
 	if (ret)
-		lbs_pr_err("firmware file format check FAIL\n");
+		pr_err("firmware file format check FAIL\n");
 	else
 		lbs_deb_fw("firmware file format check PASS\n");
 
@@ -998,7 +1001,7 @@ static int __if_usb_prog_firmware(struct if_usb_card *cardp,
 
 	ret = get_fw(cardp, fwname);
 	if (ret) {
-		lbs_pr_err("failed to find firmware (%d)\n", ret);
+		pr_err("failed to find firmware (%d)\n", ret);
 		goto done;
 	}
 
@@ -1073,13 +1076,13 @@ restart:
 	usb_kill_urb(cardp->rx_urb);
 
 	if (!cardp->fwdnldover) {
-		lbs_pr_info("failed to load fw, resetting device!\n");
+		pr_info("failed to load fw, resetting device!\n");
 		if (--reset_count >= 0) {
 			if_usb_reset_device(cardp);
 			goto restart;
 		}
 
-		lbs_pr_info("FW download failure, time = %d ms\n", i * 100);
+		pr_info("FW download failure, time = %d ms\n", i * 100);
 		ret = -EIO;
 		goto release_fw;
 	}
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index ae02e6b7bc4..1144afddd5e 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -4,6 +4,8 @@
  * thread etc..
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/moduleparam.h>
 #include <linux/delay.h>
 #include <linux/etherdevice.h>
@@ -442,7 +444,7 @@ static int lbs_thread(void *data)
 		if (priv->cmd_timed_out && priv->cur_cmd) {
 			struct cmd_ctrl_node *cmdnode = priv->cur_cmd;
 
-			lbs_pr_info("Timeout submitting command 0x%04x\n",
+			pr_info("Timeout submitting command 0x%04x\n",
 				le16_to_cpu(cmdnode->cmdbuf->command));
 			lbs_complete_command(priv, cmdnode, -ETIMEDOUT);
 			if (priv->reset_card)
@@ -470,8 +472,7 @@ static int lbs_thread(void *data)
 				 * after firmware fixes it
 				 */
 				priv->psstate = PS_STATE_AWAKE;
-				lbs_pr_alert("ignore PS_SleepConfirm in "
-					"non-connected state\n");
+				pr_alert("ignore PS_SleepConfirm in non-connected state\n");
 			}
 		}
 
@@ -565,7 +566,7 @@ int lbs_suspend(struct lbs_private *priv)
 	if (priv->is_deep_sleep) {
 		ret = lbs_set_deep_sleep(priv, 0);
 		if (ret) {
-			lbs_pr_err("deep sleep cancellation failed: %d\n", ret);
+			pr_err("deep sleep cancellation failed: %d\n", ret);
 			return ret;
 		}
 		priv->deep_sleep_required = 1;
@@ -598,7 +599,7 @@ int lbs_resume(struct lbs_private *priv)
 		priv->deep_sleep_required = 0;
 		ret = lbs_set_deep_sleep(priv, 1);
 		if (ret)
-			lbs_pr_err("deep sleep activation failed: %d\n", ret);
+			pr_err("deep sleep activation failed: %d\n", ret);
 	}
 
 	if (priv->setup_fw_on_resume)
@@ -626,7 +627,7 @@ static void lbs_cmd_timeout_handler(unsigned long data)
 	if (!priv->cur_cmd)
 		goto out;
 
-	lbs_pr_info("command 0x%04x timed out\n",
+	pr_info("command 0x%04x timed out\n",
 		le16_to_cpu(priv->cur_cmd->cmdbuf->command));
 
 	priv->cmd_timed_out = 1;
@@ -732,7 +733,7 @@ static int lbs_init_adapter(struct lbs_private *priv)
 
 	/* Allocate the command buffers */
 	if (lbs_allocate_cmd_buffer(priv)) {
-		lbs_pr_err("Out of memory allocating command buffers\n");
+		pr_err("Out of memory allocating command buffers\n");
 		ret = -ENOMEM;
 		goto out;
 	}
@@ -742,7 +743,7 @@ static int lbs_init_adapter(struct lbs_private *priv)
 	/* Create the event FIFO */
 	ret = kfifo_alloc(&priv->event_fifo, sizeof(u32) * 16, GFP_KERNEL);
 	if (ret) {
-		lbs_pr_err("Out of memory allocating event FIFO buffer\n");
+		pr_err("Out of memory allocating event FIFO buffer\n");
 		goto out;
 	}
 
@@ -793,7 +794,7 @@ struct lbs_private *lbs_add_card(void *card, struct device *dmdev)
 	/* Allocate an Ethernet device and register it */
 	wdev = lbs_cfg_alloc(dmdev);
 	if (IS_ERR(wdev)) {
-		lbs_pr_err("cfg80211 init failed\n");
+		pr_err("cfg80211 init failed\n");
 		goto done;
 	}
 
@@ -802,7 +803,7 @@ struct lbs_private *lbs_add_card(void *card, struct device *dmdev)
 	priv->wdev = wdev;
 
 	if (lbs_init_adapter(priv)) {
-		lbs_pr_err("failed to initialize adapter structure.\n");
+		pr_err("failed to initialize adapter structure\n");
 		goto err_wdev;
 	}
 
@@ -934,7 +935,7 @@ int lbs_start_card(struct lbs_private *priv)
 		goto done;
 
 	if (lbs_cfg_register(priv)) {
-		lbs_pr_err("cannot register device\n");
+		pr_err("cannot register device\n");
 		goto done;
 	}
 
@@ -944,7 +945,7 @@ int lbs_start_card(struct lbs_private *priv)
 
 	lbs_debugfs_init_one(priv, dev);
 
-	lbs_pr_info("%s: Marvell WLAN 802.11 adapter\n", dev->name);
+	pr_info("%s: Marvell WLAN 802.11 adapter\n", dev->name);
 
 	ret = 0;
 
@@ -1071,16 +1072,14 @@ int lbs_get_firmware(struct device *dev, const char *user_helper,
 	if (user_helper) {
 		ret = request_firmware(helper, user_helper, dev);
 		if (ret) {
-			lbs_pr_err("couldn't find helper firmware %s",
-					user_helper);
+			pr_err("couldn't find helper firmware %s", user_helper);
 			goto fail;
 		}
 	}
 	if (user_mainfw) {
 		ret = request_firmware(mainfw, user_mainfw, dev);
 		if (ret) {
-			lbs_pr_err("couldn't find main firmware %s",
-					user_mainfw);
+			pr_err("couldn't find main firmware %s", user_mainfw);
 			goto fail;
 		}
 	}
diff --git a/drivers/net/wireless/libertas/mesh.c b/drivers/net/wireless/libertas/mesh.c
index a0804d12bf2..054ac07862f 100644
--- a/drivers/net/wireless/libertas/mesh.c
+++ b/drivers/net/wireless/libertas/mesh.c
@@ -1,3 +1,5 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/delay.h>
 #include <linux/etherdevice.h>
 #include <linux/netdevice.h>
@@ -267,7 +269,7 @@ int lbs_init_mesh(struct lbs_private *priv)
 		lbs_add_mesh(priv);
 
 		if (device_create_file(&dev->dev, &dev_attr_lbs_mesh))
-			lbs_pr_err("cannot register lbs_mesh attribute\n");
+			pr_err("cannot register lbs_mesh attribute\n");
 
 		ret = 1;
 	}
@@ -395,7 +397,7 @@ int lbs_add_mesh(struct lbs_private *priv)
 	/* Register virtual mesh interface */
 	ret = register_netdev(mesh_dev);
 	if (ret) {
-		lbs_pr_err("cannot register mshX virtual interface\n");
+		pr_err("cannot register mshX virtual interface\n");
 		goto err_free;
 	}
 
@@ -973,7 +975,7 @@ static ssize_t mesh_id_get(struct device *dev, struct device_attribute *attr,
 		return ret;
 
 	if (defs.meshie.val.mesh_id_len > IEEE80211_MAX_SSID_LEN) {
-		lbs_pr_err("inconsistent mesh ID length");
+		pr_err("inconsistent mesh ID length\n");
 		defs.meshie.val.mesh_id_len = IEEE80211_MAX_SSID_LEN;
 	}
 
diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c
index a3f4b55aa41..24a12daa7c6 100644
--- a/drivers/net/wireless/libertas/rx.c
+++ b/drivers/net/wireless/libertas/rx.c
@@ -1,6 +1,9 @@
 /*
  * This file contains the handling of RX in wlan driver.
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/etherdevice.h>
 #include <linux/slab.h>
 #include <linux/types.h>
@@ -191,7 +194,7 @@ static u8 convert_mv_rate_to_radiotap(u8 rate)
 	case 12:		/*  54 Mbps */
 		return 108;
 	}
-	lbs_pr_alert("Invalid Marvell WLAN rate %i\n", rate);
+	pr_alert("Invalid Marvell WLAN rate %i\n", rate);
 	return 0;
 }
 
@@ -248,7 +251,7 @@ static int process_rxed_802_11_packet(struct lbs_private *priv,
 	/* add space for the new radio header */
 	if ((skb_headroom(skb) < sizeof(struct rx_radiotap_hdr)) &&
 	    pskb_expand_head(skb, sizeof(struct rx_radiotap_hdr), 0, GFP_ATOMIC)) {
-		lbs_pr_alert("%s: couldn't pskb_expand_head\n", __func__);
+		pr_alert("%s: couldn't pskb_expand_head\n", __func__);
 		ret = -ENOMEM;
 		kfree_skb(skb);
 		goto done;
-- 
cgit v1.2.3


From f3a57fd148a4afd3c38f558c5b44972cb29ea8ba Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 2 May 2011 16:49:15 -0700
Subject: libertas: Use netdev_<level> or dev_<level> where possible

Using the more descriptive logging styles gives a bit
more information about the device being operated on.

Makes the object trivially smaller too.

$ size drivers/net/wireless/libertas/built-in.o.*
 187730	   2973	  38488	 229191	  37f47	drivers/net/wireless/libertas/built-in.o.new
 188195	   2973	  38488	 229656	  38118	drivers/net/wireless/libertas/built-in.o.old

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/libertas/cfg.c     |  9 +++---
 drivers/net/wireless/libertas/cmd.c     | 42 +++++++++++++-----------
 drivers/net/wireless/libertas/cmdresp.c | 32 +++++++++---------
 drivers/net/wireless/libertas/debugfs.c |  7 ++--
 drivers/net/wireless/libertas/if_cs.c   | 15 ++++++---
 drivers/net/wireless/libertas/if_sdio.c | 19 +++++------
 drivers/net/wireless/libertas/if_spi.c  | 57 +++++++++++++++++++++------------
 drivers/net/wireless/libertas/if_usb.c  | 11 ++++---
 drivers/net/wireless/libertas/main.c    | 25 +++++++++------
 drivers/net/wireless/libertas/mesh.c    |  4 +--
 drivers/net/wireless/libertas/rx.c      |  2 +-
 11 files changed, 130 insertions(+), 93 deletions(-)

diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
index 73c5f54c9b4..a2e88498c09 100644
--- a/drivers/net/wireless/libertas/cfg.c
+++ b/drivers/net/wireless/libertas/cfg.c
@@ -1324,7 +1324,8 @@ static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev,
 		sme->ssid, sme->ssid_len,
 		WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS);
 	if (!bss) {
-		pr_err("assoc: bss %pM not in scan results\n", sme->bssid);
+		wiphy_err(wiphy, "assoc: bss %pM not in scan results\n",
+			  sme->bssid);
 		ret = -ENOENT;
 		goto done;
 	}
@@ -1381,8 +1382,8 @@ static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev,
 		lbs_enable_rsn(priv, sme->crypto.cipher_group != 0);
 		break;
 	default:
-		pr_err("unsupported cipher group 0x%x\n",
-		       sme->crypto.cipher_group);
+		wiphy_err(wiphy, "unsupported cipher group 0x%x\n",
+			  sme->crypto.cipher_group);
 		ret = -ENOTSUPP;
 		goto done;
 	}
@@ -1500,7 +1501,7 @@ static int lbs_cfg_add_key(struct wiphy *wiphy, struct net_device *netdev,
 				     params->key, params->key_len);
 		break;
 	default:
-		pr_err("unhandled cipher 0x%x\n", params->cipher);
+		wiphy_err(wiphy, "unhandled cipher 0x%x\n", params->cipher);
 		ret = -ENOTSUPP;
 		break;
 	}
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index af8ef90a122..6d59b4cf8fc 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -3,8 +3,6 @@
  * It prepares command and sends it to firmware when it is ready.
  */
 
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
 #include <linux/kfifo.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
@@ -112,7 +110,7 @@ int lbs_update_hw_spec(struct lbs_private *priv)
 	 * CF card    firmware 5.0.16p0:   cap 0x00000303
 	 * USB dongle firmware 5.110.17p2: cap 0x00000303
 	 */
-	pr_info("%pM, fw %u.%u.%up%u, cap 0x%08x\n",
+	netdev_info(priv->dev, "%pM, fw %u.%u.%up%u, cap 0x%08x\n",
 		cmd.permanentaddr,
 		priv->fwrelease >> 24 & 0xff,
 		priv->fwrelease >> 16 & 0xff,
@@ -143,7 +141,8 @@ int lbs_update_hw_spec(struct lbs_private *priv)
 	/* if it's unidentified region code, use the default (USA) */
 	if (i >= MRVDRV_MAX_REGION_CODE) {
 		priv->regioncode = 0x10;
-		pr_info("unidentified region code; using the default (USA)\n");
+		netdev_info(priv->dev,
+			    "unidentified region code; using the default (USA)\n");
 	}
 
 	if (priv->current_addr[0] == 0xff)
@@ -213,7 +212,7 @@ int lbs_host_sleep_cfg(struct lbs_private *priv, uint32_t criteria,
 					(uint8_t *)&cmd_config.wol_conf,
 					sizeof(struct wol_config));
 	} else {
-		pr_info("HOST_SLEEP_CFG failed %d\n", ret);
+		netdev_info(priv->dev, "HOST_SLEEP_CFG failed %d\n", ret);
 	}
 
 	return ret;
@@ -316,7 +315,7 @@ static int lbs_wait_for_ds_awake(struct lbs_private *priv)
 	if (priv->is_deep_sleep) {
 		if (!wait_event_interruptible_timeout(priv->ds_awake_q,
 					!priv->is_deep_sleep, (10 * HZ))) {
-			pr_err("ds_awake_q: timer expired\n");
+			netdev_err(priv->dev, "ds_awake_q: timer expired\n");
 			ret = -1;
 		}
 	}
@@ -341,7 +340,7 @@ int lbs_set_deep_sleep(struct lbs_private *priv, int deep_sleep)
 				netif_carrier_off(priv->dev);
 			}
 		} else {
-			pr_err("deep sleep: already enabled\n");
+			netdev_err(priv->dev, "deep sleep: already enabled\n");
 		}
 	} else {
 		if (priv->is_deep_sleep) {
@@ -351,7 +350,8 @@ int lbs_set_deep_sleep(struct lbs_private *priv, int deep_sleep)
 			if (!ret) {
 				ret = lbs_wait_for_ds_awake(priv);
 				if (ret)
-					pr_err("deep sleep: wakeup failed\n");
+					netdev_err(priv->dev,
+						   "deep sleep: wakeup failed\n");
 			}
 		}
 	}
@@ -385,8 +385,9 @@ int lbs_set_host_sleep(struct lbs_private *priv, int host_sleep)
 			ret = lbs_host_sleep_cfg(priv, priv->wol_criteria,
 					(struct wol_config *)NULL);
 			if (ret) {
-				pr_info("Host sleep configuration failed: %d\n",
-					ret);
+				netdev_info(priv->dev,
+					    "Host sleep configuration failed: %d\n",
+					    ret);
 				return ret;
 			}
 			if (priv->psstate == PS_STATE_FULL_POWER) {
@@ -396,19 +397,21 @@ int lbs_set_host_sleep(struct lbs_private *priv, int host_sleep)
 						sizeof(cmd),
 						lbs_ret_host_sleep_activate, 0);
 				if (ret)
-					pr_info("HOST_SLEEP_ACTIVATE failed: %d\n",
-						ret);
+					netdev_info(priv->dev,
+						    "HOST_SLEEP_ACTIVATE failed: %d\n",
+						    ret);
 			}
 
 			if (!wait_event_interruptible_timeout(
 						priv->host_sleep_q,
 						priv->is_host_sleep_activated,
 						(10 * HZ))) {
-				pr_err("host_sleep_q: timer expired\n");
+				netdev_err(priv->dev,
+					   "host_sleep_q: timer expired\n");
 				ret = -1;
 			}
 		} else {
-			pr_err("host sleep: already enabled\n");
+			netdev_err(priv->dev, "host sleep: already enabled\n");
 		}
 	} else {
 		if (priv->is_host_sleep_activated)
@@ -1008,7 +1011,8 @@ static void lbs_submit_command(struct lbs_private *priv,
 	ret = priv->hw_host_to_card(priv, MVMS_CMD, (u8 *) cmd, cmdsize);
 
 	if (ret) {
-		pr_info("DNLD_CMD: hw_host_to_card failed: %d\n", ret);
+		netdev_info(priv->dev, "DNLD_CMD: hw_host_to_card failed: %d\n",
+			    ret);
 		/* Let the timer kick in and retry, and potentially reset
 		   the whole thing if the condition persists */
 		timeo = HZ/4;
@@ -1277,7 +1281,8 @@ int lbs_execute_next_command(struct lbs_private *priv)
 	spin_lock_irqsave(&priv->driver_lock, flags);
 
 	if (priv->cur_cmd) {
-		pr_alert( "EXEC_NEXT_CMD: already processing command!\n");
+		netdev_alert(priv->dev,
+			     "EXEC_NEXT_CMD: already processing command!\n");
 		spin_unlock_irqrestore(&priv->driver_lock, flags);
 		ret = -1;
 		goto done;
@@ -1439,7 +1444,7 @@ static void lbs_send_confirmsleep(struct lbs_private *priv)
 	ret = priv->hw_host_to_card(priv, MVMS_CMD, (u8 *) &confirm_sleep,
 		sizeof(confirm_sleep));
 	if (ret) {
-		pr_alert("confirm_sleep failed\n");
+		netdev_alert(priv->dev, "confirm_sleep failed\n");
 		goto out;
 	}
 
@@ -1665,7 +1670,8 @@ int __lbs_cmd(struct lbs_private *priv, uint16_t command,
 	spin_lock_irqsave(&priv->driver_lock, flags);
 	ret = cmdnode->result;
 	if (ret)
-		pr_info("PREP_CMD: command 0x%04x failed: %d\n", command, ret);
+		netdev_info(priv->dev, "PREP_CMD: command 0x%04x failed: %d\n",
+			    command, ret);
 
 	__lbs_cleanup_and_insert_cmd(priv, cmdnode);
 	spin_unlock_irqrestore(&priv->driver_lock, flags);
diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c
index 45291a4c2a9..207fc361db8 100644
--- a/drivers/net/wireless/libertas/cmdresp.c
+++ b/drivers/net/wireless/libertas/cmdresp.c
@@ -3,8 +3,6 @@
  * responses as well as events generated by firmware.
  */
 
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/sched.h>
@@ -88,17 +86,18 @@ int lbs_process_command_response(struct lbs_private *priv, u8 *data, u32 len)
 	lbs_deb_hex(LBS_DEB_CMD, "CMD_RESP", (void *) resp, len);
 
 	if (resp->seqnum != priv->cur_cmd->cmdbuf->seqnum) {
-		pr_info("Received CMD_RESP with invalid sequence %d (expected %d)\n",
-			le16_to_cpu(resp->seqnum),
-			le16_to_cpu(priv->cur_cmd->cmdbuf->seqnum));
+		netdev_info(priv->dev,
+			    "Received CMD_RESP with invalid sequence %d (expected %d)\n",
+			    le16_to_cpu(resp->seqnum),
+			    le16_to_cpu(priv->cur_cmd->cmdbuf->seqnum));
 		spin_unlock_irqrestore(&priv->driver_lock, flags);
 		ret = -1;
 		goto done;
 	}
 	if (respcmd != CMD_RET(curcmd) &&
 	    respcmd != CMD_RET_802_11_ASSOCIATE && curcmd != CMD_802_11_ASSOCIATE) {
-		pr_info("Invalid CMD_RESP %x to command %x!\n",
-			respcmd, curcmd);
+		netdev_info(priv->dev, "Invalid CMD_RESP %x to command %x!\n",
+			    respcmd, curcmd);
 		spin_unlock_irqrestore(&priv->driver_lock, flags);
 		ret = -1;
 		goto done;
@@ -107,8 +106,9 @@ int lbs_process_command_response(struct lbs_private *priv, u8 *data, u32 len)
 	if (resp->result == cpu_to_le16(0x0004)) {
 		/* 0x0004 means -EAGAIN. Drop the response, let it time out
 		   and be resubmitted */
-		pr_info("Firmware returns DEFER to command %x. Will let it time out...\n",
-			le16_to_cpu(resp->command));
+		netdev_info(priv->dev,
+			    "Firmware returns DEFER to command %x. Will let it time out...\n",
+			    le16_to_cpu(resp->command));
 		spin_unlock_irqrestore(&priv->driver_lock, flags);
 		ret = -1;
 		goto done;
@@ -319,28 +319,28 @@ int lbs_process_event(struct lbs_private *priv, u32 event)
 		lbs_deb_cmd("EVENT: ADHOC beacon lost\n");
 		break;
 	case MACREG_INT_CODE_RSSI_LOW:
-		pr_alert("EVENT: rssi low\n");
+		netdev_alert(priv->dev, "EVENT: rssi low\n");
 		break;
 	case MACREG_INT_CODE_SNR_LOW:
-		pr_alert("EVENT: snr low\n");
+		netdev_alert(priv->dev, "EVENT: snr low\n");
 		break;
 	case MACREG_INT_CODE_MAX_FAIL:
-		pr_alert("EVENT: max fail\n");
+		netdev_alert(priv->dev, "EVENT: max fail\n");
 		break;
 	case MACREG_INT_CODE_RSSI_HIGH:
-		pr_alert("EVENT: rssi high\n");
+		netdev_alert(priv->dev, "EVENT: rssi high\n");
 		break;
 	case MACREG_INT_CODE_SNR_HIGH:
-		pr_alert("EVENT: snr high\n");
+		netdev_alert(priv->dev, "EVENT: snr high\n");
 		break;
 
 	case MACREG_INT_CODE_MESH_AUTO_STARTED:
 		/* Ignore spurious autostart events */
-		pr_info("EVENT: MESH_AUTO_STARTED (ignoring)\n");
+		netdev_info(priv->dev, "EVENT: MESH_AUTO_STARTED (ignoring)\n");
 		break;
 
 	default:
-		pr_alert("EVENT: unknown event id %d\n", event);
+		netdev_alert(priv->dev, "EVENT: unknown event id %d\n", event);
 		break;
 	}
 
diff --git a/drivers/net/wireless/libertas/debugfs.c b/drivers/net/wireless/libertas/debugfs.c
index 0bd79c5f5b5..23250f62176 100644
--- a/drivers/net/wireless/libertas/debugfs.c
+++ b/drivers/net/wireless/libertas/debugfs.c
@@ -1,5 +1,3 @@
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
 #include <linux/dcache.h>
 #include <linux/debugfs.h>
 #include <linux/delay.h>
@@ -153,13 +151,14 @@ static ssize_t lbs_host_sleep_write(struct file *file,
 		ret = lbs_set_host_sleep(priv, 0);
 	else if (host_sleep == 1) {
 		if (priv->wol_criteria == EHS_REMOVE_WAKEUP) {
-			pr_info("wake parameters not configured\n");
+			netdev_info(priv->dev,
+				    "wake parameters not configured\n");
 			ret = -EINVAL;
 			goto out_unlock;
 		}
 		ret = lbs_set_host_sleep(priv, 1);
 	} else {
-		pr_err("invalid option\n");
+		netdev_err(priv->dev, "invalid option\n");
 		ret = -EINVAL;
 	}
 
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index f2d10115f5e..63ed5798365 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -364,7 +364,7 @@ static int if_cs_send_cmd(struct lbs_private *priv, u8 *buf, u16 nb)
 		if (status & IF_CS_BIT_COMMAND)
 			break;
 		if (++loops > 100) {
-			pr_err("card not ready for commands\n");
+			netdev_err(priv->dev, "card not ready for commands\n");
 			goto done;
 		}
 		mdelay(1);
@@ -434,14 +434,16 @@ static int if_cs_receive_cmdres(struct lbs_private *priv, u8 *data, u32 *len)
 	/* is hardware ready? */
 	status = if_cs_read16(priv->card, IF_CS_CARD_STATUS);
 	if ((status & IF_CS_BIT_RESP) == 0) {
-		pr_err("no cmd response in card\n");
+		netdev_err(priv->dev, "no cmd response in card\n");
 		*len = 0;
 		goto out;
 	}
 
 	*len = if_cs_read16(priv->card, IF_CS_RESP_LEN);
 	if ((*len == 0) || (*len > LBS_CMD_BUFFER_SIZE)) {
-		pr_err("card cmd buffer has invalid # of bytes (%d)\n", *len);
+		netdev_err(priv->dev,
+			   "card cmd buffer has invalid # of bytes (%d)\n",
+			   *len);
 		goto out;
 	}
 
@@ -475,7 +477,9 @@ static struct sk_buff *if_cs_receive_data(struct lbs_private *priv)
 
 	len = if_cs_read16(priv->card, IF_CS_READ_LEN);
 	if (len == 0 || len > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
-		pr_err("card data buffer has invalid # of bytes (%d)\n", len);
+		netdev_err(priv->dev,
+			   "card data buffer has invalid # of bytes (%d)\n",
+			   len);
 		priv->dev->stats.rx_dropped++;
 		goto dat_err;
 	}
@@ -761,7 +765,8 @@ static int if_cs_host_to_card(struct lbs_private *priv,
 		ret = if_cs_send_cmd(priv, buf, nb);
 		break;
 	default:
-		pr_err("%s: unsupported type %d\n", __func__, type);
+		netdev_err(priv->dev, "%s: unsupported type %d\n",
+			   __func__, type);
 	}
 
 	lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index ab867795f54..a7b5cb0c275 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -851,7 +851,7 @@ static int if_sdio_enter_deep_sleep(struct lbs_private *priv)
 	ret = __lbs_cmd(priv, CMD_802_11_DEEP_SLEEP, &cmd, sizeof(cmd),
 			lbs_cmd_copyback, (unsigned long) &cmd);
 	if (ret)
-		pr_err("DEEP_SLEEP cmd failed\n");
+		netdev_err(priv->dev, "DEEP_SLEEP cmd failed\n");
 
 	mdelay(200);
 	return ret;
@@ -867,7 +867,7 @@ static int if_sdio_exit_deep_sleep(struct lbs_private *priv)
 
 	sdio_writeb(card->func, HOST_POWER_UP, CONFIGURATION_REG, &ret);
 	if (ret)
-		pr_err("sdio_writeb failed!\n");
+		netdev_err(priv->dev, "sdio_writeb failed!\n");
 
 	sdio_release_host(card->func);
 	lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
@@ -884,7 +884,7 @@ static int if_sdio_reset_deep_sleep_wakeup(struct lbs_private *priv)
 
 	sdio_writeb(card->func, 0, CONFIGURATION_REG, &ret);
 	if (ret)
-		pr_err("sdio_writeb failed!\n");
+		netdev_err(priv->dev, "sdio_writeb failed!\n");
 
 	sdio_release_host(card->func);
 	lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
@@ -1103,7 +1103,7 @@ static int if_sdio_probe(struct sdio_func *func,
 		lbs_deb_sdio("send function INIT command\n");
 		if (__lbs_cmd(priv, CMD_FUNC_INIT, &cmd, sizeof(cmd),
 				lbs_cmd_copyback, (unsigned long) &cmd))
-			pr_alert("CMD_FUNC_INIT cmd failed\n");
+			netdev_alert(priv->dev, "CMD_FUNC_INIT cmd failed\n");
 	}
 
 	ret = lbs_start_card(priv);
@@ -1204,19 +1204,20 @@ static int if_sdio_suspend(struct device *dev)
 
 	mmc_pm_flag_t flags = sdio_get_host_pm_caps(func);
 
-	pr_info("%s: suspend: PM flags = 0x%x\n", sdio_func_id(func), flags);
+	dev_info(dev, "%s: suspend: PM flags = 0x%x\n",
+		 sdio_func_id(func), flags);
 
 	/* If we aren't being asked to wake on anything, we should bail out
 	 * and let the SD stack power down the card.
 	 */
 	if (card->priv->wol_criteria == EHS_REMOVE_WAKEUP) {
-		pr_info("Suspend without wake params -- powering down card\n");
+		dev_info(dev, "Suspend without wake params -- powering down card\n");
 		return -ENOSYS;
 	}
 
 	if (!(flags & MMC_PM_KEEP_POWER)) {
-		pr_err("%s: cannot remain alive while host is suspended\n",
-		       sdio_func_id(func));
+		dev_err(dev, "%s: cannot remain alive while host is suspended\n",
+			sdio_func_id(func));
 		return -ENOSYS;
 	}
 
@@ -1237,7 +1238,7 @@ static int if_sdio_resume(struct device *dev)
 	struct if_sdio_card *card = sdio_get_drvdata(func);
 	int ret;
 
-	pr_info("%s: resume: we're back\n", sdio_func_id(func));
+	dev_info(dev, "%s: resume: we're back\n", sdio_func_id(func));
 
 	ret = lbs_resume(card->priv);
 
diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c
index 4d19b5726c1..463352c890d 100644
--- a/drivers/net/wireless/libertas/if_spi.c
+++ b/drivers/net/wireless/libertas/if_spi.c
@@ -585,6 +585,7 @@ static int if_spi_prog_main_firmware_check_len(struct if_spi_card *card,
 static int if_spi_prog_main_firmware(struct if_spi_card *card,
 					const struct firmware *firmware)
 {
+	struct lbs_private *priv = card->priv;
 	int len, prev_len;
 	int bytes, crc_err = 0, err = 0;
 	const u8 *fw;
@@ -598,8 +599,9 @@ static int if_spi_prog_main_firmware(struct if_spi_card *card,
 
 	err = spu_wait_for_u16(card, IF_SPI_SCRATCH_1_REG, 0, 0);
 	if (err) {
-		pr_err("%s: timed out waiting for initial scratch reg = 0\n",
-		       __func__);
+		netdev_err(priv->dev,
+			   "%s: timed out waiting for initial scratch reg = 0\n",
+			   __func__);
 		goto out;
 	}
 
@@ -617,7 +619,8 @@ static int if_spi_prog_main_firmware(struct if_spi_card *card,
 			 * If there are no more bytes left, we would normally
 			 * expect to have terminated with len = 0
 			 */
-			pr_err("Firmware load wants more bytes than we have to offer.\n");
+			netdev_err(priv->dev,
+				   "Firmware load wants more bytes than we have to offer.\n");
 			break;
 		}
 		if (crc_err) {
@@ -706,12 +709,14 @@ static int if_spi_c2h_cmd(struct if_spi_card *card)
 	if (err)
 		goto out;
 	if (!len) {
-		pr_err("%s: error: card has no data for host\n", __func__);
+		netdev_err(priv->dev, "%s: error: card has no data for host\n",
+			   __func__);
 		err = -EINVAL;
 		goto out;
 	} else if (len > IF_SPI_CMD_BUF_SIZE) {
-		pr_err("%s: error: response packet too large: %d bytes, but maximum is %d\n",
-		       __func__, len, IF_SPI_CMD_BUF_SIZE);
+		netdev_err(priv->dev,
+			   "%s: error: response packet too large: %d bytes, but maximum is %d\n",
+			   __func__, len, IF_SPI_CMD_BUF_SIZE);
 		err = -EINVAL;
 		goto out;
 	}
@@ -732,7 +737,7 @@ static int if_spi_c2h_cmd(struct if_spi_card *card)
 
 out:
 	if (err)
-		pr_err("%s: err=%d\n", __func__, err);
+		netdev_err(priv->dev, "%s: err=%d\n", __func__, err);
 	lbs_deb_leave(LBS_DEB_SPI);
 	return err;
 }
@@ -740,6 +745,7 @@ out:
 /* Move data from the card to the host */
 static int if_spi_c2h_data(struct if_spi_card *card)
 {
+	struct lbs_private *priv = card->priv;
 	struct sk_buff *skb;
 	char *data;
 	u16 len;
@@ -752,12 +758,14 @@ static int if_spi_c2h_data(struct if_spi_card *card)
 	if (err)
 		goto out;
 	if (!len) {
-		pr_err("%s: error: card has no data for host\n", __func__);
+		netdev_err(priv->dev, "%s: error: card has no data for host\n",
+			   __func__);
 		err = -EINVAL;
 		goto out;
 	} else if (len > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
-		pr_err("%s: error: card has %d bytes of data, but our maximum skb size is %zu\n",
-		       __func__, len, MRVDRV_ETH_RX_PACKET_BUFFER_SIZE);
+		netdev_err(priv->dev,
+			   "%s: error: card has %d bytes of data, but our maximum skb size is %zu\n",
+			   __func__, len, MRVDRV_ETH_RX_PACKET_BUFFER_SIZE);
 		err = -EINVAL;
 		goto out;
 	}
@@ -788,7 +796,7 @@ free_skb:
 	dev_kfree_skb(skb);
 out:
 	if (err)
-		pr_err("%s: err=%d\n", __func__, err);
+		netdev_err(priv->dev, "%s: err=%d\n", __func__, err);
 	lbs_deb_leave(LBS_DEB_SPI);
 	return err;
 }
@@ -797,6 +805,7 @@ out:
 static void if_spi_h2c(struct if_spi_card *card,
 			struct if_spi_packet *packet, int type)
 {
+	struct lbs_private *priv = card->priv;
 	int err = 0;
 	u16 int_type, port_reg;
 
@@ -810,7 +819,8 @@ static void if_spi_h2c(struct if_spi_card *card,
 		port_reg = IF_SPI_CMD_RDWRPORT_REG;
 		break;
 	default:
-		pr_err("can't transfer buffer of type %d\n", type);
+		netdev_err(priv->dev, "can't transfer buffer of type %d\n",
+			   type);
 		err = -EINVAL;
 		goto out;
 	}
@@ -824,7 +834,7 @@ out:
 	kfree(packet);
 
 	if (err)
-		pr_err("%s: error %d\n", __func__, err);
+		netdev_err(priv->dev, "%s: error %d\n", __func__, err);
 }
 
 /* Inform the host about a card event */
@@ -848,7 +858,7 @@ static void if_spi_e2h(struct if_spi_card *card)
 	lbs_queue_event(priv, cause & 0xff);
 out:
 	if (err)
-		pr_err("%s: error %d\n", __func__, err);
+		netdev_err(priv->dev, "%s: error %d\n", __func__, err);
 }
 
 static void if_spi_host_to_card_worker(struct work_struct *work)
@@ -858,8 +868,10 @@ static void if_spi_host_to_card_worker(struct work_struct *work)
 	u16 hiStatus;
 	unsigned long flags;
 	struct if_spi_packet *packet;
+	struct lbs_private *priv;
 
 	card = container_of(work, struct if_spi_card, packet_work);
+	priv = card->priv;
 
 	lbs_deb_enter(LBS_DEB_SPI);
 
@@ -870,7 +882,7 @@ static void if_spi_host_to_card_worker(struct work_struct *work)
 	err = spu_read_u16(card, IF_SPI_HOST_INT_STATUS_REG,
 				&hiStatus);
 	if (err) {
-		pr_err("I/O error\n");
+		netdev_err(priv->dev, "I/O error\n");
 		goto err;
 	}
 
@@ -933,7 +945,7 @@ static void if_spi_host_to_card_worker(struct work_struct *work)
 
 err:
 	if (err)
-		pr_err("%s: got error %d\n", __func__, err);
+		netdev_err(priv->dev, "%s: got error %d\n", __func__, err);
 
 	lbs_deb_leave(LBS_DEB_SPI);
 }
@@ -956,7 +968,8 @@ static int if_spi_host_to_card(struct lbs_private *priv,
 	lbs_deb_enter_args(LBS_DEB_SPI, "type %d, bytes %d", type, nb);
 
 	if (nb == 0) {
-		pr_err("%s: invalid size requested: %d\n", __func__, nb);
+		netdev_err(priv->dev, "%s: invalid size requested: %d\n",
+			   __func__, nb);
 		err = -EINVAL;
 		goto out;
 	}
@@ -984,7 +997,8 @@ static int if_spi_host_to_card(struct lbs_private *priv,
 		spin_unlock_irqrestore(&card->buffer_lock, flags);
 		break;
 	default:
-		pr_err("can't transfer buffer of type %d\n", type);
+		netdev_err(priv->dev, "can't transfer buffer of type %d\n",
+			   type);
 		err = -EINVAL;
 		break;
 	}
@@ -1017,6 +1031,7 @@ static irqreturn_t if_spi_host_interrupt(int irq, void *dev_id)
 
 static int if_spi_init_card(struct if_spi_card *card)
 {
+	struct lbs_private *priv = card->priv;
 	struct spi_device *spi = card->spi;
 	int err, i;
 	u32 scratch;
@@ -1045,7 +1060,8 @@ static int if_spi_init_card(struct if_spi_card *card)
 				break;
 		}
 		if (i == ARRAY_SIZE(fw_table)) {
-			pr_err("Unsupported chip_id: 0x%02x\n", card->card_id);
+			netdev_err(priv->dev, "Unsupported chip_id: 0x%02x\n",
+				   card->card_id);
 			err = -ENODEV;
 			goto out;
 		}
@@ -1054,7 +1070,8 @@ static int if_spi_init_card(struct if_spi_card *card)
 					card->card_id, &fw_table[0], &helper,
 					&mainfw);
 		if (err) {
-			pr_err("failed to find firmware (%d)\n", err);
+			netdev_err(priv->dev, "failed to find firmware (%d)\n",
+				   err);
 			goto out;
 		}
 
diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c
index b68e162bc32..b5acc393a65 100644
--- a/drivers/net/wireless/libertas/if_usb.c
+++ b/drivers/net/wireless/libertas/if_usb.c
@@ -206,7 +206,7 @@ static void if_usb_setup_firmware(struct lbs_private *priv)
 	wake_method.hdr.size = cpu_to_le16(sizeof(wake_method));
 	wake_method.action = cpu_to_le16(CMD_ACT_GET);
 	if (lbs_cmd_with_response(priv, CMD_802_11_FW_WAKE_METHOD, &wake_method)) {
-		pr_info("Firmware does not seem to support PS mode\n");
+		netdev_info(priv->dev, "Firmware does not seem to support PS mode\n");
 		priv->fwcapinfo &= ~FW_CAPINFO_PS;
 	} else {
 		if (le16_to_cpu(wake_method.method) == CMD_WAKE_METHOD_COMMAND_INT) {
@@ -215,7 +215,8 @@ static void if_usb_setup_firmware(struct lbs_private *priv)
 			/* The versions which boot up this way don't seem to
 			   work even if we set it to the command interrupt */
 			priv->fwcapinfo &= ~FW_CAPINFO_PS;
-			pr_info("Firmware doesn't wake via command interrupt; disabling PS mode\n");
+			netdev_info(priv->dev,
+				    "Firmware doesn't wake via command interrupt; disabling PS mode\n");
 		}
 	}
 }
@@ -351,10 +352,12 @@ static int if_usb_probe(struct usb_interface *intf,
 	usb_set_intfdata(intf, cardp);
 
 	if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_fw))
-		pr_err("cannot register lbs_flash_fw attribute\n");
+		netdev_err(priv->dev,
+			   "cannot register lbs_flash_fw attribute\n");
 
 	if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_boot2))
-		pr_err("cannot register lbs_flash_boot2 attribute\n");
+		netdev_err(priv->dev,
+			   "cannot register lbs_flash_boot2 attribute\n");
 
 	/*
 	 * EHS_REMOVE_WAKEUP is not supported on all versions of the firmware.
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 1144afddd5e..84d05a765b5 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -444,8 +444,8 @@ static int lbs_thread(void *data)
 		if (priv->cmd_timed_out && priv->cur_cmd) {
 			struct cmd_ctrl_node *cmdnode = priv->cur_cmd;
 
-			pr_info("Timeout submitting command 0x%04x\n",
-				le16_to_cpu(cmdnode->cmdbuf->command));
+			netdev_info(dev, "Timeout submitting command 0x%04x\n",
+				    le16_to_cpu(cmdnode->cmdbuf->command));
 			lbs_complete_command(priv, cmdnode, -ETIMEDOUT);
 			if (priv->reset_card)
 				priv->reset_card(priv);
@@ -472,7 +472,8 @@ static int lbs_thread(void *data)
 				 * after firmware fixes it
 				 */
 				priv->psstate = PS_STATE_AWAKE;
-				pr_alert("ignore PS_SleepConfirm in non-connected state\n");
+				netdev_alert(dev,
+					     "ignore PS_SleepConfirm in non-connected state\n");
 			}
 		}
 
@@ -566,7 +567,8 @@ int lbs_suspend(struct lbs_private *priv)
 	if (priv->is_deep_sleep) {
 		ret = lbs_set_deep_sleep(priv, 0);
 		if (ret) {
-			pr_err("deep sleep cancellation failed: %d\n", ret);
+			netdev_err(priv->dev,
+				   "deep sleep cancellation failed: %d\n", ret);
 			return ret;
 		}
 		priv->deep_sleep_required = 1;
@@ -599,7 +601,8 @@ int lbs_resume(struct lbs_private *priv)
 		priv->deep_sleep_required = 0;
 		ret = lbs_set_deep_sleep(priv, 1);
 		if (ret)
-			pr_err("deep sleep activation failed: %d\n", ret);
+			netdev_err(priv->dev,
+				   "deep sleep activation failed: %d\n", ret);
 	}
 
 	if (priv->setup_fw_on_resume)
@@ -627,8 +630,8 @@ static void lbs_cmd_timeout_handler(unsigned long data)
 	if (!priv->cur_cmd)
 		goto out;
 
-	pr_info("command 0x%04x timed out\n",
-		le16_to_cpu(priv->cur_cmd->cmdbuf->command));
+	netdev_info(priv->dev, "command 0x%04x timed out\n",
+		    le16_to_cpu(priv->cur_cmd->cmdbuf->command));
 
 	priv->cmd_timed_out = 1;
 	wake_up_interruptible(&priv->waitq);
@@ -945,7 +948,7 @@ int lbs_start_card(struct lbs_private *priv)
 
 	lbs_debugfs_init_one(priv, dev);
 
-	pr_info("%s: Marvell WLAN 802.11 adapter\n", dev->name);
+	netdev_info(dev, "Marvell WLAN 802.11 adapter\n");
 
 	ret = 0;
 
@@ -1072,14 +1075,16 @@ int lbs_get_firmware(struct device *dev, const char *user_helper,
 	if (user_helper) {
 		ret = request_firmware(helper, user_helper, dev);
 		if (ret) {
-			pr_err("couldn't find helper firmware %s", user_helper);
+			dev_err(dev, "couldn't find helper firmware %s\n",
+				user_helper);
 			goto fail;
 		}
 	}
 	if (user_mainfw) {
 		ret = request_firmware(mainfw, user_mainfw, dev);
 		if (ret) {
-			pr_err("couldn't find main firmware %s", user_mainfw);
+			dev_err(dev, "couldn't find main firmware %s\n",
+				user_mainfw);
 			goto fail;
 		}
 	}
diff --git a/drivers/net/wireless/libertas/mesh.c b/drivers/net/wireless/libertas/mesh.c
index 054ac07862f..24cf06680c6 100644
--- a/drivers/net/wireless/libertas/mesh.c
+++ b/drivers/net/wireless/libertas/mesh.c
@@ -269,7 +269,7 @@ int lbs_init_mesh(struct lbs_private *priv)
 		lbs_add_mesh(priv);
 
 		if (device_create_file(&dev->dev, &dev_attr_lbs_mesh))
-			pr_err("cannot register lbs_mesh attribute\n");
+			netdev_err(dev, "cannot register lbs_mesh attribute\n");
 
 		ret = 1;
 	}
@@ -975,7 +975,7 @@ static ssize_t mesh_id_get(struct device *dev, struct device_attribute *attr,
 		return ret;
 
 	if (defs.meshie.val.mesh_id_len > IEEE80211_MAX_SSID_LEN) {
-		pr_err("inconsistent mesh ID length\n");
+		dev_err(dev, "inconsistent mesh ID length\n");
 		defs.meshie.val.mesh_id_len = IEEE80211_MAX_SSID_LEN;
 	}
 
diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c
index 24a12daa7c6..fdb0448301a 100644
--- a/drivers/net/wireless/libertas/rx.c
+++ b/drivers/net/wireless/libertas/rx.c
@@ -251,7 +251,7 @@ static int process_rxed_802_11_packet(struct lbs_private *priv,
 	/* add space for the new radio header */
 	if ((skb_headroom(skb) < sizeof(struct rx_radiotap_hdr)) &&
 	    pskb_expand_head(skb, sizeof(struct rx_radiotap_hdr), 0, GFP_ATOMIC)) {
-		pr_alert("%s: couldn't pskb_expand_head\n", __func__);
+		netdev_alert(dev, "%s: couldn't pskb_expand_head\n", __func__);
 		ret = -ENOMEM;
 		kfree_skb(skb);
 		goto done;
-- 
cgit v1.2.3


From 2a7bccccdb9604a717c2128a931f022267d35629 Mon Sep 17 00:00:00 2001
From: Andy Ross <andy.ross@windriver.com>
Date: Mon, 9 May 2011 16:11:16 -0700
Subject: Bluetooth: Device ids for ath3k on Pegatron Lucid tablets

New ath3k device IDs used on the Pegatron Lucid (ExoPC and WeTab) units.

Signed-off-by: Andy Ross <andy.ross@windriver.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
---
 drivers/bluetooth/ath3k.c | 1 +
 drivers/bluetooth/btusb.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 695d4414bd4..6bacef368fa 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -62,6 +62,7 @@ static struct usb_device_id ath3k_table[] = {
 
 	/* Atheros AR3011 with sflash firmware*/
 	{ USB_DEVICE(0x0CF3, 0x3002) },
+	{ USB_DEVICE(0x13d3, 0x3304) },
 
 	/* Atheros AR9285 Malbec with sflash firmware */
 	{ USB_DEVICE(0x03F0, 0x311D) },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 762a5109c68..c2de8951e3f 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -104,6 +104,7 @@ static struct usb_device_id blacklist_table[] = {
 
 	/* Atheros 3011 with sflash firmware */
 	{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
+	{ USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
 
 	/* Atheros AR9285 Malbec with sflash firmware */
 	{ USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
-- 
cgit v1.2.3


From b3b1b061583ba4909b59a2f736825d86495fe956 Mon Sep 17 00:00:00 2001
From: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Date: Fri, 6 May 2011 09:42:31 +0200
Subject: Bluetooth: Double check sec req for pre 2.1 device

In case of pre v2.1 devices authentication request will return
success immediately if the link key already exists without any
authentication process.

That means, it's not possible to re-authenticate the link if you
already have combination key and for instance want to re-authenticate
to get the high security (use 16 digit pin).

Therefore, it's necessary to check security requirements on auth
complete event to prevent not enough secure connection.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
---
 include/net/bluetooth/hci_core.h |  1 +
 net/bluetooth/hci_conn.c         | 17 +++++++++++++++++
 net/bluetooth/rfcomm/core.c      |  2 +-
 3 files changed, 19 insertions(+), 1 deletion(-)

diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 14cc3249c1e..6c994c004d1 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -422,6 +422,7 @@ void hci_conn_check_pending(struct hci_dev *hdev);
 
 struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 sec_level, __u8 auth_type);
 int hci_conn_check_link_mode(struct hci_conn *conn);
+int hci_conn_check_secure(struct hci_conn *conn, __u8 sec_level);
 int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type);
 int hci_conn_change_link_key(struct hci_conn *conn);
 int hci_conn_switch_role(struct hci_conn *conn, __u8 role);
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index 7f5ad8a2b22..3163330cd4f 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -623,6 +623,23 @@ encrypt:
 }
 EXPORT_SYMBOL(hci_conn_security);
 
+/* Check secure link requirement */
+int hci_conn_check_secure(struct hci_conn *conn, __u8 sec_level)
+{
+	BT_DBG("conn %p", conn);
+
+	if (sec_level != BT_SECURITY_HIGH)
+		return 1; /* Accept if non-secure is required */
+
+	if (conn->key_type == HCI_LK_AUTH_COMBINATION ||
+			(conn->key_type == HCI_LK_COMBINATION &&
+			conn->pin_length == 16))
+		return 1;
+
+	return 0; /* Reject not secure link */
+}
+EXPORT_SYMBOL(hci_conn_check_secure);
+
 /* Change link key */
 int hci_conn_change_link_key(struct hci_conn *conn)
 {
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 121a5c13b98..5759bb7054f 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -2096,7 +2096,7 @@ static void rfcomm_security_cfm(struct hci_conn *conn, u8 status, u8 encrypt)
 		if (!test_and_clear_bit(RFCOMM_AUTH_PENDING, &d->flags))
 			continue;
 
-		if (!status)
+		if (!status && hci_conn_check_secure(conn, d->sec_level))
 			set_bit(RFCOMM_AUTH_ACCEPT, &d->flags);
 		else
 			set_bit(RFCOMM_AUTH_REJECT, &d->flags);
-- 
cgit v1.2.3


From b130e5cec958bae3867cf6ab09a9b24ba8fada01 Mon Sep 17 00:00:00 2001
From: Javier Cardona <javier@cozybit.com>
Date: Tue, 3 May 2011 16:57:07 -0700
Subject: nl80211: Introduce NL80211_MESH_SETUP_USERSPACE_AMPE

Introduce a new configuration option to support AMPE from userspace.

Prior to this series we only supported authentication in userspace: an
authentication daemon would authenticate peer candidates in userspace
and hand them over to the kernel.  From that point the mesh stack would
take over and establish a peer link (Mesh Peering Management).

These patches introduce support for Authenticated Mesh Peering Exchange
in userspace.  The userspace daemon implements the AMPE protocol and on
successfull completion create mesh peers and install encryption keys.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/nl80211.h    | 10 ++++++++++
 include/net/cfg80211.h     |  4 +++-
 net/mac80211/cfg.c         |  6 +++++-
 net/mac80211/ieee80211_i.h |  6 +++++-
 net/mac80211/mesh.c        |  2 +-
 net/mac80211/mesh_plink.c  |  5 +++--
 net/wireless/nl80211.c     |  4 +++-
 7 files changed, 30 insertions(+), 7 deletions(-)

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index a75dea9c416..c53b916036c 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -1769,6 +1769,15 @@ enum nl80211_meshconf_params {
  * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
  * daemon will be authenticating mesh candidates.
  *
+ * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication
+ * daemon will be securing peer link frames.  AMPE is a secured version of Mesh
+ * Peering Management (MPM) and is implemented with the assistance of a
+ * userspace daemon.  When this flag is set, the kernel will send peer
+ * management frames to a userspace daemon that will implement AMPE
+ * functionality (security capabilities selection, key confirmation, and key
+ * management).  When the flag is unset (default), the kernel can autonomously
+ * complete (unsecured) mesh peering without the need of a userspace daemon.
+ *
  * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
  * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
  */
@@ -1778,6 +1787,7 @@ enum nl80211_mesh_setup_params {
 	NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC,
 	NL80211_MESH_SETUP_IE,
 	NL80211_MESH_SETUP_USERSPACE_AUTH,
+	NL80211_MESH_SETUP_USERSPACE_AMPE,
 
 	/* keep last */
 	__NL80211_MESH_SETUP_ATTR_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 0920daf3680..10c17d68059 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -695,7 +695,8 @@ struct mesh_config {
  * @path_metric: which metric to use
  * @ie: vendor information elements (optional)
  * @ie_len: length of vendor information elements
- * @is_secure: or not
+ * @is_authenticated: this mesh requires authentication
+ * @is_secure: this mesh uses security
  *
  * These parameters are fixed when the mesh is created.
  */
@@ -706,6 +707,7 @@ struct mesh_setup {
 	u8  path_metric;
 	const u8 *ie;
 	u8 ie_len;
+	bool is_authenticated;
 	bool is_secure;
 };
 
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 1ebc13383ae..18c2555e04e 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1064,7 +1064,11 @@ static int copy_mesh_setup(struct ieee80211_if_mesh *ifmsh,
 	memcpy(ifmsh->mesh_id, setup->mesh_id, ifmsh->mesh_id_len);
 	ifmsh->mesh_pp_id = setup->path_sel_proto;
 	ifmsh->mesh_pm_id = setup->path_metric;
-	ifmsh->is_secure = setup->is_secure;
+	ifmsh->security = IEEE80211_MESH_SEC_NONE;
+	if (setup->is_authenticated)
+		ifmsh->security |= IEEE80211_MESH_SEC_AUTHED;
+	if (setup->is_secure)
+		ifmsh->security |= IEEE80211_MESH_SEC_SECURED;
 
 	return 0;
 }
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index e89bc27f8dc..7f4d0dc1d53 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -490,7 +490,11 @@ struct ieee80211_if_mesh {
 	bool accepting_plinks;
 	const u8 *ie;
 	u8 ie_len;
-	bool is_secure;
+	enum {
+		IEEE80211_MESH_SEC_NONE = 0x0,
+		IEEE80211_MESH_SEC_AUTHED = 0x1,
+		IEEE80211_MESH_SEC_SECURED = 0x2,
+	} security;
 };
 
 #ifdef CONFIG_MAC80211_MESH
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index c1299e24954..2a59eb34513 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -574,7 +574,7 @@ static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
 			       &elems);
 
 	/* ignore beacons from secure mesh peers if our security is off */
-	if (elems.rsn_len && !sdata->u.mesh.is_secure)
+	if (elems.rsn_len && sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE)
 		return;
 
 	if (elems.ds_params && elems.ds_params_len == 1)
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index 84e5b056af0..87abf8deb36 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -251,7 +251,7 @@ void mesh_neighbour_update(u8 *hw_addr, u32 rates,
 		rcu_read_unlock();
 		/* Userspace handles peer allocation when security is enabled
 		 * */
-		if (sdata->u.mesh.is_secure)
+		if (sdata->u.mesh.security & IEEE80211_MESH_SEC_AUTHED)
 			cfg80211_notify_new_peer_candidate(sdata->dev, hw_addr,
 					elems->ie_start, elems->total_len,
 					GFP_KERNEL);
@@ -460,7 +460,8 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 		mpl_dbg("Mesh plink: missing necessary peer link ie\n");
 		return;
 	}
-	if (elems.rsn_len && !sdata->u.mesh.is_secure) {
+	if (elems.rsn_len &&
+			sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE) {
 		mpl_dbg("Mesh plink: can't establish link with secure peer\n");
 		return;
 	}
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 0a199a1ca9b..64efc2d7a7a 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2871,6 +2871,7 @@ static const struct nla_policy
 	[NL80211_MESH_SETUP_USERSPACE_AUTH] = { .type = NLA_FLAG },
 	[NL80211_MESH_SETUP_IE] = { .type = NLA_BINARY,
 		.len = IEEE80211_MAX_DATA_LEN },
+	[NL80211_MESH_SETUP_USERSPACE_AMPE] = { .type = NLA_FLAG },
 };
 
 static int nl80211_parse_mesh_config(struct genl_info *info,
@@ -2980,7 +2981,8 @@ static int nl80211_parse_mesh_setup(struct genl_info *info,
 		setup->ie = nla_data(ieattr);
 		setup->ie_len = nla_len(ieattr);
 	}
-	setup->is_secure = nla_get_flag(tb[NL80211_MESH_SETUP_USERSPACE_AUTH]);
+	setup->is_authenticated = nla_get_flag(tb[NL80211_MESH_SETUP_USERSPACE_AUTH]);
+	setup->is_secure = nla_get_flag(tb[NL80211_MESH_SETUP_USERSPACE_AMPE]);
 
 	return 0;
 }
-- 
cgit v1.2.3


From 0778a6a3e56cabdc322755f97ad23ee67efad0f0 Mon Sep 17 00:00:00 2001
From: Javier Cardona <javier@cozybit.com>
Date: Tue, 3 May 2011 16:57:08 -0700
Subject: mac80211: Let userspace send action frames over mesh interfaces

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/wireless/mlme.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index 16881fea4ce..493b939970c 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -963,6 +963,16 @@ int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev,
 			if (memcmp(mgmt->bssid, dev->dev_addr, ETH_ALEN))
 				err = -EINVAL;
 			break;
+		case NL80211_IFTYPE_MESH_POINT:
+			if (memcmp(mgmt->sa, mgmt->bssid, ETH_ALEN)) {
+				err = -EINVAL;
+				break;
+			}
+			/*
+			 * check for mesh DA must be done by driver as
+			 * cfg80211 doesn't track the stations
+			 */
+			break;
 		default:
 			err = -EOPNOTSUPP;
 			break;
-- 
cgit v1.2.3


From d3aaec8ab76c2d604c2ba7332e1338674607597b Mon Sep 17 00:00:00 2001
From: Javier Cardona <javier@cozybit.com>
Date: Tue, 3 May 2011 16:57:09 -0700
Subject: mac80211: Drop MESH_PLINK category and use new ANA-approved
 MESH_ACTION

Note: This breaks compatibility with previous mesh protocol instances.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/ieee80211.h | 5 ++---
 net/mac80211/mesh.c       | 2 +-
 net/mac80211/mesh_plink.c | 2 +-
 net/mac80211/rx.c         | 7 +++++--
 4 files changed, 9 insertions(+), 7 deletions(-)

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 79690b71066..ee1c96a866c 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1261,9 +1261,8 @@ enum ieee80211_category {
 	WLAN_CATEGORY_MULTIHOP_ACTION = 14,
 	WLAN_CATEGORY_SELF_PROTECTED = 15,
 	WLAN_CATEGORY_WMM = 17,
-	/* TODO: remove MESH_PLINK and MESH_PATH_SEL after */
-	/*       mesh is updated to current 802.11s draft  */
-	WLAN_CATEGORY_MESH_PLINK = 30,
+	/* TODO: remove MESH_PATH_SEL after mesh is updated
+	 * to current 802.11s draft  */
 	WLAN_CATEGORY_MESH_PATH_SEL = 32,
 	WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126,
 	WLAN_CATEGORY_VENDOR_SPECIFIC = 127,
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 2a59eb34513..75378e852f0 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -600,7 +600,7 @@ static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata,
 					  struct ieee80211_rx_status *rx_status)
 {
 	switch (mgmt->u.action.category) {
-	case WLAN_CATEGORY_MESH_PLINK:
+	case WLAN_CATEGORY_MESH_ACTION:
 		mesh_rx_plink_frame(sdata, mgmt, len, rx_status);
 		break;
 	case WLAN_CATEGORY_MESH_PATH_SEL:
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index 87abf8deb36..0120e9e3628 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -182,7 +182,7 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
 	memcpy(mgmt->da, da, ETH_ALEN);
 	memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
 	/* BSSID is left zeroed, wildcard value */
-	mgmt->u.action.category = WLAN_CATEGORY_MESH_PLINK;
+	mgmt->u.action.category = WLAN_CATEGORY_MESH_ACTION;
 	mgmt->u.action.u.plink_action.action_code = action;
 
 	if (action == PLINK_CLOSE)
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 81241e18f3a..634f3d97a27 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -495,8 +495,11 @@ ieee80211_rx_mesh_check(struct ieee80211_rx_data *rx)
 			return RX_DROP_MONITOR;
 
 		if (ieee80211_is_action(hdr->frame_control)) {
+			u8 category;
 			mgmt = (struct ieee80211_mgmt *)hdr;
-			if (mgmt->u.action.category != WLAN_CATEGORY_MESH_PLINK)
+			category = mgmt->u.action.category;
+			if (category != WLAN_CATEGORY_MESH_ACTION &&
+				category != WLAN_CATEGORY_SELF_PROTECTED)
 				return RX_DROP_MONITOR;
 			return RX_CONTINUE;
 		}
@@ -2205,7 +2208,7 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
 			goto handled;
 		}
 		break;
-	case WLAN_CATEGORY_MESH_PLINK:
+	case WLAN_CATEGORY_MESH_ACTION:
 		if (!ieee80211_vif_is_mesh(&sdata->vif))
 			break;
 		goto queue;
-- 
cgit v1.2.3


From 915b5c50f8f45e78ea96d93f1e49edb20c9470bd Mon Sep 17 00:00:00 2001
From: Javier Cardona <javier@cozybit.com>
Date: Tue, 3 May 2011 16:57:10 -0700
Subject: open80211s: Stop using zero for address 3 in mesh plink mgmt frames

Previous versions of 11s draft used the all zeroes address.  Current
draft uses the same address as address 2.

Also, use the ANA-approved action category code for peer establishment frames.

Note: This breaks compatibility with previous mesh protocol instances.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/mesh_plink.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index 0120e9e3628..2c37bee3095 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -43,7 +43,7 @@
 #define dot11MeshMaxPeerLinks(s) (s->u.mesh.mshcfg.dot11MeshMaxPeerLinks)
 
 enum plink_frame_type {
-	PLINK_OPEN = 0,
+	PLINK_OPEN = 1,
 	PLINK_CONFIRM,
 	PLINK_CLOSE
 };
@@ -181,7 +181,7 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
 					  IEEE80211_STYPE_ACTION);
 	memcpy(mgmt->da, da, ETH_ALEN);
 	memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
-	/* BSSID is left zeroed, wildcard value */
+	memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
 	mgmt->u.action.category = WLAN_CATEGORY_MESH_ACTION;
 	mgmt->u.action.u.plink_action.action_code = action;
 
-- 
cgit v1.2.3


From 0a35d36d6f019bde6c98812456798275b02e5aee Mon Sep 17 00:00:00 2001
From: Javier Cardona <javier@cozybit.com>
Date: Wed, 4 May 2011 10:24:56 -0700
Subject: cfg80211: Use capability info to detect mesh beacons.

Mesh beacons no longer use all-zeroes BSSID.  Beacon frames for MBSS,
infrastructure BSS, or IBSS are differentiated by the Capability
Information field in the Beacon frame.  A mesh STA sets the ESS and IBSS
subfields to 0 in transmitted Beacon or Probe Response management
frames.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/ieee80211.h |  5 +++++
 net/wireless/scan.c       | 14 +++++++-------
 2 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index ee1c96a866c..d527fb7bd67 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1002,6 +1002,11 @@ struct ieee80211_ht_info {
 
 #define WLAN_CAPABILITY_ESS		(1<<0)
 #define WLAN_CAPABILITY_IBSS		(1<<1)
+
+/* A mesh STA sets the ESS and IBSS capability bits to zero */
+#define WLAN_CAPABILITY_IS_MBSS(cap)	\
+	(!((cap) & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)))
+
 #define WLAN_CAPABILITY_CF_POLLABLE	(1<<2)
 #define WLAN_CAPABILITY_CF_POLL_REQUEST	(1<<3)
 #define WLAN_CAPABILITY_PRIVACY		(1<<4)
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index fbf6f33ae4d..62e542a2b19 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -210,7 +210,7 @@ static bool is_mesh(struct cfg80211_bss *a,
 {
 	const u8 *ie;
 
-	if (!is_zero_ether_addr(a->bssid))
+	if (!WLAN_CAPABILITY_IS_MBSS(a->capability))
 		return false;
 
 	ie = cfg80211_find_ie(WLAN_EID_MESH_ID,
@@ -248,11 +248,7 @@ static int cmp_bss(struct cfg80211_bss *a,
 	if (a->channel != b->channel)
 		return b->channel->center_freq - a->channel->center_freq;
 
-	r = memcmp(a->bssid, b->bssid, ETH_ALEN);
-	if (r)
-		return r;
-
-	if (is_zero_ether_addr(a->bssid)) {
+	if (WLAN_CAPABILITY_IS_MBSS(a->capability | b->capability)) {
 		r = cmp_ies(WLAN_EID_MESH_ID,
 			    a->information_elements,
 			    a->len_information_elements,
@@ -267,6 +263,10 @@ static int cmp_bss(struct cfg80211_bss *a,
 			       b->len_information_elements);
 	}
 
+	r = memcmp(a->bssid, b->bssid, ETH_ALEN);
+	if (r)
+		return r;
+
 	return cmp_ies(WLAN_EID_SSID,
 		       a->information_elements,
 		       a->len_information_elements,
@@ -407,7 +407,7 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev,
 
 	res->ts = jiffies;
 
-	if (is_zero_ether_addr(res->pub.bssid)) {
+	if (WLAN_CAPABILITY_IS_MBSS(res->pub.capability)) {
 		/* must be mesh, verify */
 		meshid = cfg80211_find_ie(WLAN_EID_MESH_ID,
 					  res->pub.information_elements,
-- 
cgit v1.2.3


From 9c3990aaec0ad9f686ef6480f6861f2df89b2a7a Mon Sep 17 00:00:00 2001
From: Javier Cardona <javier@cozybit.com>
Date: Tue, 3 May 2011 16:57:11 -0700
Subject: nl80211: Let userspace drive the peer link management states.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/nl80211.h |  4 ++++
 include/net/cfg80211.h  | 29 +++++++++++++++++++++++++++++
 net/mac80211/cfg.c      | 30 +++++++++++++++++++++---------
 net/mac80211/sta_info.h | 23 -----------------------
 net/wireless/nl80211.c  |  6 ++++++
 5 files changed, 60 insertions(+), 32 deletions(-)

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index c53b916036c..de96783954a 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -913,6 +913,9 @@ enum nl80211_commands {
  * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver
  *	allows auth frames in a mesh to be passed to userspace for processing via
  *	the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
+ * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link. Used when
+ *      userspace is driving the peer link management state machine.
+ *      @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled.
  *
  * @NL80211_ATTR_WOWLAN_SUPPORTED: indicates, as part of the wiphy capabilities,
  *	the supported WoWLAN triggers
@@ -1109,6 +1112,7 @@ enum nl80211_attrs {
 	NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
 
 	NL80211_ATTR_SUPPORT_MESH_AUTH,
+	NL80211_ATTR_STA_PLINK_STATE,
 
 	NL80211_ATTR_WOWLAN_TRIGGERS,
 	NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 10c17d68059..4b0d035be64 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -371,6 +371,33 @@ enum plink_actions {
 	PLINK_ACTION_BLOCK,
 };
 
+/**
+ * enum plink_states - state of a mesh peer link finite state machine
+ *
+ * @PLINK_LISTEN: initial state, considered the implicit state of non
+ * existant mesh peer links
+ * @PLINK_OPN_SNT: mesh plink open frame has been sent to this mesh
+ * peer @PLINK_OPN_RCVD: mesh plink open frame has been received from
+ * this mesh peer
+ * @PLINK_CNF_RCVD: mesh plink confirm frame has been received from
+ * this mesh peer
+ * @PLINK_ESTAB: mesh peer link is established
+ * @PLINK_HOLDING: mesh peer link is being closed or cancelled
+ * @PLINK_BLOCKED: all frames transmitted from this mesh plink are
+ * discarded
+ * @PLINK_INVALID: reserved
+ */
+enum plink_state {
+	PLINK_LISTEN,
+	PLINK_OPN_SNT,
+	PLINK_OPN_RCVD,
+	PLINK_CNF_RCVD,
+	PLINK_ESTAB,
+	PLINK_HOLDING,
+	PLINK_BLOCKED,
+	PLINK_INVALID,
+};
+
 /**
  * struct station_parameters - station parameters
  *
@@ -387,6 +414,7 @@ enum plink_actions {
  * @listen_interval: listen interval or -1 for no change
  * @aid: AID or zero for no change
  * @plink_action: plink action to take
+ * @plink_state: set the peer link state for a station
  * @ht_capa: HT capabilities of station
  */
 struct station_parameters {
@@ -397,6 +425,7 @@ struct station_parameters {
 	u16 aid;
 	u8 supported_rates_len;
 	u8 plink_action;
+	u8 plink_state;
 	struct ieee80211_ht_cap *ht_capa;
 };
 
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 18c2555e04e..51f775772d9 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -734,15 +734,27 @@ static void sta_apply_parameters(struct ieee80211_local *local,
 						  params->ht_capa,
 						  &sta->sta.ht_cap);
 
-	if (ieee80211_vif_is_mesh(&sdata->vif) && params->plink_action) {
-		switch (params->plink_action) {
-		case PLINK_ACTION_OPEN:
-			mesh_plink_open(sta);
-			break;
-		case PLINK_ACTION_BLOCK:
-			mesh_plink_block(sta);
-			break;
-		}
+	if (ieee80211_vif_is_mesh(&sdata->vif)) {
+		if (sdata->u.mesh.security & IEEE80211_MESH_SEC_SECURED)
+			switch (params->plink_state) {
+			case PLINK_LISTEN:
+			case PLINK_ESTAB:
+			case PLINK_BLOCKED:
+				sta->plink_state = params->plink_state;
+				break;
+			default:
+				/*  nothing  */
+				break;
+			}
+		else
+			switch (params->plink_action) {
+			case PLINK_ACTION_OPEN:
+				mesh_plink_open(sta);
+				break;
+			case PLINK_ACTION_BLOCK:
+				mesh_plink_block(sta);
+				break;
+			}
 	}
 }
 
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index af1a7f8c867..f00b4dcb49d 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -173,29 +173,6 @@ struct sta_ampdu_mlme {
 };
 
 
-/**
- * enum plink_state - state of a mesh peer link finite state machine
- *
- * @PLINK_LISTEN: initial state, considered the implicit state of non existant
- * 	mesh peer links
- * @PLINK_OPN_SNT: mesh plink open frame has been sent to this mesh peer
- * @PLINK_OPN_RCVD: mesh plink open frame has been received from this mesh peer
- * @PLINK_CNF_RCVD: mesh plink confirm frame has been received from this mesh
- * 	peer
- * @PLINK_ESTAB: mesh peer link is established
- * @PLINK_HOLDING: mesh peer link is being closed or cancelled
- * @PLINK_BLOCKED: all frames transmitted from this mesh plink are discarded
- */
-enum plink_state {
-	PLINK_LISTEN,
-	PLINK_OPN_SNT,
-	PLINK_OPN_RCVD,
-	PLINK_CNF_RCVD,
-	PLINK_ESTAB,
-	PLINK_HOLDING,
-	PLINK_BLOCKED
-};
-
 /**
  * struct sta_info - STA information
  *
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 64efc2d7a7a..f698c1d116e 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -174,6 +174,7 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
 	[NL80211_ATTR_OFFCHANNEL_TX_OK] = { .type = NLA_FLAG },
 	[NL80211_ATTR_KEY_DEFAULT_TYPES] = { .type = NLA_NESTED },
 	[NL80211_ATTR_WOWLAN_TRIGGERS] = { .type = NLA_NESTED },
+	[NL80211_ATTR_STA_PLINK_STATE] = { .type = NLA_U8 },
 };
 
 /* policy for the key attributes */
@@ -2247,6 +2248,7 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
 	memset(&params, 0, sizeof(params));
 
 	params.listen_interval = -1;
+	params.plink_state = PLINK_INVALID;
 
 	if (info->attrs[NL80211_ATTR_STA_AID])
 		return -EINVAL;
@@ -2278,6 +2280,10 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
 		params.plink_action =
 		    nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_ACTION]);
 
+	if (info->attrs[NL80211_ATTR_STA_PLINK_STATE])
+		params.plink_state =
+		    nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_STATE]);
+
 	err = get_vlan(info, rdev, &params.vlan);
 	if (err)
 		goto out;
-- 
cgit v1.2.3


From ff973af74aa6932ca4758266bccec68e8135ddf7 Mon Sep 17 00:00:00 2001
From: Thomas Pedersen <thomas@cozybit.com>
Date: Tue, 3 May 2011 16:57:12 -0700
Subject: nl80211: allow installing keys for a meshif

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/cfg.c     | 5 ++++-
 net/wireless/nl80211.c | 1 +
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 51f775772d9..c416cce5e1e 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -136,7 +136,10 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
 	mutex_lock(&sdata->local->sta_mtx);
 
 	if (mac_addr) {
-		sta = sta_info_get_bss(sdata, mac_addr);
+		if (ieee80211_vif_is_mesh(&sdata->vif))
+			sta = sta_info_get(sdata, mac_addr);
+		else
+			sta = sta_info_get_bss(sdata, mac_addr);
 		if (!sta) {
 			ieee80211_key_free(sdata->local, key);
 			err = -ENOENT;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index f698c1d116e..b454f8960a0 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -545,6 +545,7 @@ static int nl80211_key_allowed(struct wireless_dev *wdev)
 	case NL80211_IFTYPE_AP:
 	case NL80211_IFTYPE_AP_VLAN:
 	case NL80211_IFTYPE_P2P_GO:
+	case NL80211_IFTYPE_MESH_POINT:
 		break;
 	case NL80211_IFTYPE_ADHOC:
 		if (!wdev->current_bss)
-- 
cgit v1.2.3


From 8429828ec96b66b6861e9fabebec007e9e132370 Mon Sep 17 00:00:00 2001
From: Thomas Pedersen <thomas@cozybit.com>
Date: Tue, 3 May 2011 16:57:13 -0700
Subject: nl80211: allow setting MFP flag for a meshif

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/wireless/nl80211.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index b454f8960a0..fc3c95d9254 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2328,6 +2328,7 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
 			err = -EINVAL;
 		if (params.sta_flags_mask &
 				~(BIT(NL80211_STA_FLAG_AUTHENTICATED) |
+				  BIT(NL80211_STA_FLAG_MFP) |
 				  BIT(NL80211_STA_FLAG_AUTHORIZED)))
 			err = -EINVAL;
 		break;
-- 
cgit v1.2.3


From 8f9cb77d6d213c153b0571f494df0c24456aaf47 Mon Sep 17 00:00:00 2001
From: Thomas Pedersen <thomas@cozybit.com>
Date: Tue, 3 May 2011 16:57:14 -0700
Subject: mac80211: Self-protected management frames are not robust

They may contain encrypted information elements (as AMPE frames do)
but they are not encrypted.

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/ieee80211.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index d527fb7bd67..b2eee587988 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1520,6 +1520,7 @@ static inline bool ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr)
 		category = ((u8 *) hdr) + 24;
 		return *category != WLAN_CATEGORY_PUBLIC &&
 			*category != WLAN_CATEGORY_HT &&
+			*category != WLAN_CATEGORY_SELF_PROTECTED &&
 			*category != WLAN_CATEGORY_VENDOR_SPECIFIC;
 	}
 
-- 
cgit v1.2.3


From 9ca99eeca0cfe839c481f3350988e9ed94188567 Mon Sep 17 00:00:00 2001
From: Javier Cardona <javier@cozybit.com>
Date: Tue, 3 May 2011 16:57:15 -0700
Subject: mac80211: Check size of a new mesh path table for changes since
 allocation.

Not sure if I'm chasing a ghost here, seems like the
mesh_path->size_order needs to be inside an RCU-read section to prevent
that value from changing between table allocation and copying.  We have
observed crashes that might be caused by this.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/mesh_pathtbl.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index 7776ae5a8f1..c1a2bf2aa2d 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -76,7 +76,6 @@ static int mesh_table_grow(struct mesh_table *oldtbl,
 			< oldtbl->mean_chain_len * (oldtbl->hash_mask + 1))
 		return -EAGAIN;
 
-
 	newtbl->free_node = oldtbl->free_node;
 	newtbl->mean_chain_len = oldtbl->mean_chain_len;
 	newtbl->copy_node = oldtbl->copy_node;
@@ -329,7 +328,8 @@ void mesh_mpath_table_grow(void)
 {
 	struct mesh_table *oldtbl, *newtbl;
 
-	newtbl = mesh_table_alloc(mesh_paths->size_order + 1);
+	rcu_read_lock();
+	newtbl = mesh_table_alloc(rcu_dereference(mesh_paths)->size_order + 1);
 	if (!newtbl)
 		return;
 	write_lock(&pathtbl_resize_lock);
@@ -339,6 +339,7 @@ void mesh_mpath_table_grow(void)
 		write_unlock(&pathtbl_resize_lock);
 		return;
 	}
+	rcu_read_unlock();
 	rcu_assign_pointer(mesh_paths, newtbl);
 	write_unlock(&pathtbl_resize_lock);
 
@@ -350,7 +351,8 @@ void mesh_mpp_table_grow(void)
 {
 	struct mesh_table *oldtbl, *newtbl;
 
-	newtbl = mesh_table_alloc(mpp_paths->size_order + 1);
+	rcu_read_lock();
+	newtbl = mesh_table_alloc(rcu_dereference(mpp_paths)->size_order + 1);
 	if (!newtbl)
 		return;
 	write_lock(&pathtbl_resize_lock);
@@ -360,6 +362,7 @@ void mesh_mpp_table_grow(void)
 		write_unlock(&pathtbl_resize_lock);
 		return;
 	}
+	rcu_read_unlock();
 	rcu_assign_pointer(mpp_paths, newtbl);
 	write_unlock(&pathtbl_resize_lock);
 
-- 
cgit v1.2.3


From 9b84b80891e5e25ae21c855bb135b05274125a29 Mon Sep 17 00:00:00 2001
From: Javier Cardona <javier@cozybit.com>
Date: Tue, 3 May 2011 16:57:16 -0700
Subject: mac80211: Fix locking bug on mesh path table access

The mesh and mpp path tables are accessed from softirq and workqueue
context so non-irq locking cannot be used.  Or at least that's what
PROVE_RCU seems to tell us here:

[  431.240946] =================================
[  431.241061] [ INFO: inconsistent lock state ]
[  431.241061] 2.6.39-rc3-wl+ #354
[  431.241061] ---------------------------------
[  431.241061] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
[  431.241061] kworker/u:1/1423 [HC0[0]:SC0[0]:HE1:SE1] takes:
[  431.241061]  (&(&newtbl->hashwlock[i])->rlock){+.?...}, at:
[<c14671bf>] mesh_path_add+0x167/0x257

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/mesh_pathtbl.c | 54 +++++++++++++++++++++++----------------------
 1 file changed, 28 insertions(+), 26 deletions(-)

diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index c1a2bf2aa2d..c7cb3cc083d 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -55,12 +55,12 @@ void mesh_table_free(struct mesh_table *tbl, bool free_leafs)
 
 	mesh_hash = tbl->hash_buckets;
 	for (i = 0; i <= tbl->hash_mask; i++) {
-		spin_lock(&tbl->hashwlock[i]);
+		spin_lock_bh(&tbl->hashwlock[i]);
 		hlist_for_each_safe(p, q, &mesh_hash[i]) {
 			tbl->free_node(p, free_leafs);
 			atomic_dec(&tbl->entries);
 		}
-		spin_unlock(&tbl->hashwlock[i]);
+		spin_unlock_bh(&tbl->hashwlock[i]);
 	}
 	__mesh_table_free(tbl);
 }
@@ -274,7 +274,7 @@ int mesh_path_add(u8 *dst, struct ieee80211_sub_if_data *sdata)
 	if (!new_node)
 		goto err_node_alloc;
 
-	read_lock(&pathtbl_resize_lock);
+	read_lock_bh(&pathtbl_resize_lock);
 	memcpy(new_mpath->dst, dst, ETH_ALEN);
 	new_mpath->sdata = sdata;
 	new_mpath->flags = 0;
@@ -289,7 +289,7 @@ int mesh_path_add(u8 *dst, struct ieee80211_sub_if_data *sdata)
 	hash_idx = mesh_table_hash(dst, sdata, mesh_paths);
 	bucket = &mesh_paths->hash_buckets[hash_idx];
 
-	spin_lock(&mesh_paths->hashwlock[hash_idx]);
+	spin_lock_bh(&mesh_paths->hashwlock[hash_idx]);
 
 	err = -EEXIST;
 	hlist_for_each_entry(node, n, bucket, list) {
@@ -305,8 +305,8 @@ int mesh_path_add(u8 *dst, struct ieee80211_sub_if_data *sdata)
 
 	mesh_paths_generation++;
 
-	spin_unlock(&mesh_paths->hashwlock[hash_idx]);
-	read_unlock(&pathtbl_resize_lock);
+	spin_unlock_bh(&mesh_paths->hashwlock[hash_idx]);
+	read_unlock_bh(&pathtbl_resize_lock);
 	if (grow) {
 		set_bit(MESH_WORK_GROW_MPATH_TABLE,  &ifmsh->wrkq_flags);
 		ieee80211_queue_work(&local->hw, &sdata->work);
@@ -314,8 +314,8 @@ int mesh_path_add(u8 *dst, struct ieee80211_sub_if_data *sdata)
 	return 0;
 
 err_exists:
-	spin_unlock(&mesh_paths->hashwlock[hash_idx]);
-	read_unlock(&pathtbl_resize_lock);
+	spin_unlock_bh(&mesh_paths->hashwlock[hash_idx]);
+	read_unlock_bh(&pathtbl_resize_lock);
 	kfree(new_node);
 err_node_alloc:
 	kfree(new_mpath);
@@ -332,16 +332,17 @@ void mesh_mpath_table_grow(void)
 	newtbl = mesh_table_alloc(rcu_dereference(mesh_paths)->size_order + 1);
 	if (!newtbl)
 		return;
-	write_lock(&pathtbl_resize_lock);
+	write_lock_bh(&pathtbl_resize_lock);
 	oldtbl = mesh_paths;
 	if (mesh_table_grow(mesh_paths, newtbl) < 0) {
+		rcu_read_unlock();
 		__mesh_table_free(newtbl);
-		write_unlock(&pathtbl_resize_lock);
+		write_unlock_bh(&pathtbl_resize_lock);
 		return;
 	}
 	rcu_read_unlock();
 	rcu_assign_pointer(mesh_paths, newtbl);
-	write_unlock(&pathtbl_resize_lock);
+	write_unlock_bh(&pathtbl_resize_lock);
 
 	synchronize_rcu();
 	mesh_table_free(oldtbl, false);
@@ -355,16 +356,17 @@ void mesh_mpp_table_grow(void)
 	newtbl = mesh_table_alloc(rcu_dereference(mpp_paths)->size_order + 1);
 	if (!newtbl)
 		return;
-	write_lock(&pathtbl_resize_lock);
+	write_lock_bh(&pathtbl_resize_lock);
 	oldtbl = mpp_paths;
 	if (mesh_table_grow(mpp_paths, newtbl) < 0) {
+		rcu_read_unlock();
 		__mesh_table_free(newtbl);
-		write_unlock(&pathtbl_resize_lock);
+		write_unlock_bh(&pathtbl_resize_lock);
 		return;
 	}
 	rcu_read_unlock();
 	rcu_assign_pointer(mpp_paths, newtbl);
-	write_unlock(&pathtbl_resize_lock);
+	write_unlock_bh(&pathtbl_resize_lock);
 
 	synchronize_rcu();
 	mesh_table_free(oldtbl, false);
@@ -398,7 +400,7 @@ int mpp_path_add(u8 *dst, u8 *mpp, struct ieee80211_sub_if_data *sdata)
 	if (!new_node)
 		goto err_node_alloc;
 
-	read_lock(&pathtbl_resize_lock);
+	read_lock_bh(&pathtbl_resize_lock);
 	memcpy(new_mpath->dst, dst, ETH_ALEN);
 	memcpy(new_mpath->mpp, mpp, ETH_ALEN);
 	new_mpath->sdata = sdata;
@@ -411,7 +413,7 @@ int mpp_path_add(u8 *dst, u8 *mpp, struct ieee80211_sub_if_data *sdata)
 	hash_idx = mesh_table_hash(dst, sdata, mpp_paths);
 	bucket = &mpp_paths->hash_buckets[hash_idx];
 
-	spin_lock(&mpp_paths->hashwlock[hash_idx]);
+	spin_lock_bh(&mpp_paths->hashwlock[hash_idx]);
 
 	err = -EEXIST;
 	hlist_for_each_entry(node, n, bucket, list) {
@@ -425,8 +427,8 @@ int mpp_path_add(u8 *dst, u8 *mpp, struct ieee80211_sub_if_data *sdata)
 		mpp_paths->mean_chain_len * (mpp_paths->hash_mask + 1))
 		grow = 1;
 
-	spin_unlock(&mpp_paths->hashwlock[hash_idx]);
-	read_unlock(&pathtbl_resize_lock);
+	spin_unlock_bh(&mpp_paths->hashwlock[hash_idx]);
+	read_unlock_bh(&pathtbl_resize_lock);
 	if (grow) {
 		set_bit(MESH_WORK_GROW_MPP_TABLE,  &ifmsh->wrkq_flags);
 		ieee80211_queue_work(&local->hw, &sdata->work);
@@ -434,8 +436,8 @@ int mpp_path_add(u8 *dst, u8 *mpp, struct ieee80211_sub_if_data *sdata)
 	return 0;
 
 err_exists:
-	spin_unlock(&mpp_paths->hashwlock[hash_idx]);
-	read_unlock(&pathtbl_resize_lock);
+	spin_unlock_bh(&mpp_paths->hashwlock[hash_idx]);
+	read_unlock_bh(&pathtbl_resize_lock);
 	kfree(new_node);
 err_node_alloc:
 	kfree(new_mpath);
@@ -548,11 +550,11 @@ int mesh_path_del(u8 *addr, struct ieee80211_sub_if_data *sdata)
 	int hash_idx;
 	int err = 0;
 
-	read_lock(&pathtbl_resize_lock);
+	read_lock_bh(&pathtbl_resize_lock);
 	hash_idx = mesh_table_hash(addr, sdata, mesh_paths);
 	bucket = &mesh_paths->hash_buckets[hash_idx];
 
-	spin_lock(&mesh_paths->hashwlock[hash_idx]);
+	spin_lock_bh(&mesh_paths->hashwlock[hash_idx]);
 	hlist_for_each_entry(node, n, bucket, list) {
 		mpath = node->mpath;
 		if (mpath->sdata == sdata &&
@@ -570,8 +572,8 @@ int mesh_path_del(u8 *addr, struct ieee80211_sub_if_data *sdata)
 	err = -ENXIO;
 enddel:
 	mesh_paths_generation++;
-	spin_unlock(&mesh_paths->hashwlock[hash_idx]);
-	read_unlock(&pathtbl_resize_lock);
+	spin_unlock_bh(&mesh_paths->hashwlock[hash_idx]);
+	read_unlock_bh(&pathtbl_resize_lock);
 	return err;
 }
 
@@ -723,7 +725,7 @@ void mesh_path_expire(struct ieee80211_sub_if_data *sdata)
 	struct hlist_node *p;
 	int i;
 
-	read_lock(&pathtbl_resize_lock);
+	read_lock_bh(&pathtbl_resize_lock);
 	for_each_mesh_entry(mesh_paths, p, node, i) {
 		if (node->mpath->sdata != sdata)
 			continue;
@@ -738,7 +740,7 @@ void mesh_path_expire(struct ieee80211_sub_if_data *sdata)
 		} else
 			spin_unlock_bh(&mpath->state_lock);
 	}
-	read_unlock(&pathtbl_resize_lock);
+	read_unlock_bh(&pathtbl_resize_lock);
 }
 
 void mesh_pathtbl_unregister(void)
-- 
cgit v1.2.3


From 28104cae63708d1790cd71db8a45af50d5ea5a92 Mon Sep 17 00:00:00 2001
From: Javier Cardona <javier@cozybit.com>
Date: Tue, 3 May 2011 16:57:17 -0700
Subject: mac80211: Move call to mpp_path_lookup inside RCU-read section

PROVE_RCU caught that one:

[  431.214070] ===================================================
[  431.215341] [ INFO: suspicious rcu_dereference_check() usage. ]
[  431.215674] ---------------------------------------------------
[  431.216043] net/mac80211/mesh_pathtbl.c:184 invoked
rcu_dereference_check() without protection!

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/tx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index e1a39ed1ef5..c9f12113ca6 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1751,6 +1751,7 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
 			ret = NETDEV_TX_OK;
 			goto fail;
 		}
+		rcu_read_lock();
 		if (!is_multicast_ether_addr(skb->data))
 			mppath = mpp_path_lookup(skb->data, sdata);
 
@@ -1765,13 +1766,13 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
 		    !(mppath && compare_ether_addr(mppath->mpp, skb->data))) {
 			hdrlen = ieee80211_fill_mesh_addresses(&hdr, &fc,
 					skb->data, skb->data + ETH_ALEN);
+			rcu_read_unlock();
 			meshhdrlen = ieee80211_new_mesh_header(&mesh_hdr,
 					sdata, NULL, NULL);
 		} else {
 			int is_mesh_mcast = 1;
 			const u8 *mesh_da;
 
-			rcu_read_lock();
 			if (is_multicast_ether_addr(skb->data))
 				/* DA TA mSA AE:SA */
 				mesh_da = skb->data;
-- 
cgit v1.2.3


From 1833d81a1229adeab98f275b47624d66462561e5 Mon Sep 17 00:00:00 2001
From: Javier Cardona <javier@cozybit.com>
Date: Tue, 3 May 2011 16:57:18 -0700
Subject: mac80211: allow setting supported rates on mesh peers

This is necessary for userspace managed stations.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/wireless/nl80211.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index fc3c95d9254..95dd5832e71 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2324,8 +2324,6 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
 			err = -EINVAL;
 		if (params.listen_interval >= 0)
 			err = -EINVAL;
-		if (params.supported_rates)
-			err = -EINVAL;
 		if (params.sta_flags_mask &
 				~(BIT(NL80211_STA_FLAG_AUTHENTICATED) |
 				  BIT(NL80211_STA_FLAG_MFP) |
-- 
cgit v1.2.3


From fd5999cf11c8322568034bbf0d5594be94542a57 Mon Sep 17 00:00:00 2001
From: Javier Cardona <javier@cozybit.com>
Date: Tue, 3 May 2011 16:57:19 -0700
Subject: ath9k: fix beaconing for mesh interfaces

Mesh beaconing on ath9k was broken by this commit:

commit 4801416c76a3a355076d6d371c00270dfe332e1c
Author: Ben Greear <greearb@candelatech.com>
Date:   Sat Jan 15 19:13:48 2011 +0000

This patch assigns the right opmode when the device is used in mesh
mode.

Reported-by: Fabrice Deyber fabricedeyber@agilemesh.com
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index c4d32c54224..9dd72d8c78e 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1385,7 +1385,9 @@ static void ath9k_calculate_summary_state(struct ieee80211_hw *hw,
 		ath9k_hw_set_tsfadjust(ah, 0);
 		sc->sc_flags &= ~SC_OP_TSF_RESET;
 
-		if (iter_data.nwds + iter_data.nmeshes)
+		if (iter_data.nmeshes)
+			ah->opmode = NL80211_IFTYPE_MESH_POINT;
+		else if (iter_data.nwds)
 			ah->opmode = NL80211_IFTYPE_AP;
 		else if (iter_data.nadhocs)
 			ah->opmode = NL80211_IFTYPE_ADHOC;
-- 
cgit v1.2.3


From 9b76b1e4d383868ba9c2a5fa2c2716bbc2384342 Mon Sep 17 00:00:00 2001
From: Fabrice Deyber <fabricedeyber@agilemesh.com>
Date: Fri, 6 May 2011 15:11:51 -0700
Subject: mac80211: Only process mesh PREPs with equal seq number if metric is
 better.

This fixes routing loops in PREP propagation and is in accordance with Draft
11, Section: 11C.9.8.4.

Signed-off-by: Fabrice Deyber <fabricedeyber@agilemesh.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/mesh_hwmp.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index e57f2e728cf..849fecd0820 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -391,7 +391,6 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata,
 			    (mpath->flags & MESH_PATH_SN_VALID)) {
 				if (SN_GT(mpath->sn, orig_sn) ||
 				    (mpath->sn == orig_sn &&
-				     action == MPATH_PREQ &&
 				     new_metric >= mpath->metric)) {
 					process = false;
 					fresh_info = false;
-- 
cgit v1.2.3


From d381f221199c58d2bf25a7024e786fc58562487c Mon Sep 17 00:00:00 2001
From: Ben Greear <greearb@candelatech.com>
Date: Fri, 6 May 2011 15:24:34 -0700
Subject: ath5k: Fix lockup due to un-init spinlock.

This was introduced in 2.6.39-rc1 it seems.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Sedat Dilek <sedat.dilek@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath5k/base.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 7583841fc29..aaa0cd72b0d 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -2394,7 +2394,7 @@ ath5k_init_softc(struct ath5k_softc *sc, const struct ath_bus_ops *bus_ops)
 	spin_lock_init(&sc->rxbuflock);
 	spin_lock_init(&sc->txbuflock);
 	spin_lock_init(&sc->block);
-
+	spin_lock_init(&sc->irqlock);
 
 	/* Setup interrupt handler */
 	ret = request_irq(sc->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
-- 
cgit v1.2.3


From 92ddc111c4bc7216673bce7c49a2d54bedb1593c Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Mon, 9 May 2011 14:40:06 +0300
Subject: mac80211: add a couple of trace event classes to reduce duplicated
 code

The functions drv_add_interface() and drv_remove_interface() print out
the same values in the traces.  Combine the traces of these two
functions into one event class to remove some duplicate code.

Also add a new class for functions drv_set_frag_threshold() and
drv_set_rts_threshold().

Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/driver-trace.h | 130 ++++++++++++++++++--------------------------
 1 file changed, 53 insertions(+), 77 deletions(-)

diff --git a/net/mac80211/driver-trace.h b/net/mac80211/driver-trace.h
index 11e1ea5111e..dd9779d41d2 100644
--- a/net/mac80211/driver-trace.h
+++ b/net/mac80211/driver-trace.h
@@ -55,6 +55,49 @@ DECLARE_EVENT_CLASS(local_only_evt,
 	TP_printk(LOCAL_PR_FMT, LOCAL_PR_ARG)
 );
 
+DECLARE_EVENT_CLASS(local_sdata_addr_evt,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata),
+	TP_ARGS(local, sdata),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		VIF_ENTRY
+		__array(char, addr, 6)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		VIF_ASSIGN;
+		memcpy(__entry->addr, sdata->vif.addr, 6);
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT  VIF_PR_FMT " addr:%pM",
+		LOCAL_PR_ARG, VIF_PR_ARG, __entry->addr
+	)
+);
+
+DECLARE_EVENT_CLASS(local_u32_evt,
+	TP_PROTO(struct ieee80211_local *local, u32 value),
+	TP_ARGS(local, value),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(u32, value)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->value = value;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT " value:%d",
+		LOCAL_PR_ARG, __entry->value
+	)
+);
+
 DEFINE_EVENT(local_only_evt, drv_return_void,
 	TP_PROTO(struct ieee80211_local *local),
 	TP_ARGS(local)
@@ -123,28 +166,10 @@ DEFINE_EVENT(local_only_evt, drv_stop,
 	TP_ARGS(local)
 );
 
-TRACE_EVENT(drv_add_interface,
+DEFINE_EVENT(local_sdata_addr_evt, drv_add_interface,
 	TP_PROTO(struct ieee80211_local *local,
 		 struct ieee80211_sub_if_data *sdata),
-
-	TP_ARGS(local, sdata),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		VIF_ENTRY
-		__array(char, addr, 6)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		VIF_ASSIGN;
-		memcpy(__entry->addr, sdata->vif.addr, 6);
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT  VIF_PR_FMT " addr:%pM",
-		LOCAL_PR_ARG, VIF_PR_ARG, __entry->addr
-	)
+	TP_ARGS(local, sdata)
 );
 
 TRACE_EVENT(drv_change_interface,
@@ -175,27 +200,10 @@ TRACE_EVENT(drv_change_interface,
 	)
 );
 
-TRACE_EVENT(drv_remove_interface,
-	TP_PROTO(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata),
-
-	TP_ARGS(local, sdata),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		VIF_ENTRY
-		__array(char, addr, 6)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		VIF_ASSIGN;
-		memcpy(__entry->addr, sdata->vif.addr, 6);
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT  VIF_PR_FMT " addr:%pM",
-		LOCAL_PR_ARG, VIF_PR_ARG, __entry->addr
-	)
+DEFINE_EVENT(local_sdata_addr_evt, drv_remove_interface,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata),
+	TP_ARGS(local, sdata)
 );
 
 TRACE_EVENT(drv_config,
@@ -514,46 +522,14 @@ TRACE_EVENT(drv_get_tkip_seq,
 	)
 );
 
-TRACE_EVENT(drv_set_frag_threshold,
+DEFINE_EVENT(local_u32_evt, drv_set_frag_threshold,
 	TP_PROTO(struct ieee80211_local *local, u32 value),
-
-	TP_ARGS(local, value),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		__field(u32, value)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		__entry->value = value;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT " value:%d",
-		LOCAL_PR_ARG, __entry->value
-	)
+	TP_ARGS(local, value)
 );
 
-TRACE_EVENT(drv_set_rts_threshold,
+DEFINE_EVENT(local_u32_evt, drv_set_rts_threshold,
 	TP_PROTO(struct ieee80211_local *local, u32 value),
-
-	TP_ARGS(local, value),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		__field(u32, value)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		__entry->value = value;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT " value:%d",
-		LOCAL_PR_ARG, __entry->value
-	)
+	TP_ARGS(local, value)
 );
 
 TRACE_EVENT(drv_set_coverage_class,
-- 
cgit v1.2.3


From a7ffab33203ae0c755b33a80756fe734f732dbb0 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Tue, 10 May 2011 15:53:16 +0200
Subject: b43legacy: trivial: use TMSLOW def instead of magic value
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43legacy/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index f6d54463b24..1ab8861dd43 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2234,7 +2234,7 @@ static int b43legacy_chip_init(struct b43legacy_wldev *dev)
 	b43legacy_write32(dev, B43legacy_MMIO_DMA5_IRQ_MASK, 0x0000DC00);
 
 	value32 = ssb_read32(dev->dev, SSB_TMSLOW);
-	value32 |= 0x00100000;
+	value32 |= B43legacy_TMSLOW_MACPHYCLKEN;
 	ssb_write32(dev->dev, SSB_TMSLOW, value32);
 
 	b43legacy_write16(dev, B43legacy_MMIO_POWERUP_DELAY,
-- 
cgit v1.2.3


From 858a16529cb4c6434d863740283e0dfeb93cd599 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Tue, 10 May 2011 16:05:33 +0200
Subject: b43: move MAC PHY clock controling function
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This is not N-PHY specific function, we partially duplicate code.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c  | 17 +++++++++++++----
 drivers/net/wireless/b43/main.h  |  1 +
 drivers/net/wireless/b43/phy_n.c | 13 +------------
 3 files changed, 15 insertions(+), 16 deletions(-)

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index f7582c096f8..1e6a2add2aa 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2685,6 +2685,17 @@ out:
 	dev->mac_suspended++;
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/MacPhyClkSet */
+void b43_mac_phy_clock_set(struct b43_wldev *dev, bool on)
+{
+	u32 tmslow = ssb_read32(dev->dev, SSB_TMSLOW);
+	if (on)
+		tmslow |= B43_TMSLOW_MACPHYCLKEN;
+	else
+		tmslow &= ~B43_TMSLOW_MACPHYCLKEN;
+	ssb_write32(dev->dev, SSB_TMSLOW, tmslow);
+}
+
 static void b43_adjust_opmode(struct b43_wldev *dev)
 {
 	struct b43_wl *wl = dev->wl;
@@ -2841,7 +2852,7 @@ static int b43_chip_init(struct b43_wldev *dev)
 {
 	struct b43_phy *phy = &dev->phy;
 	int err;
-	u32 value32, macctl;
+	u32 macctl;
 	u16 value16;
 
 	/* Initialize the MAC control */
@@ -2919,9 +2930,7 @@ static int b43_chip_init(struct b43_wldev *dev)
 	b43_write32(dev, B43_MMIO_DMA4_IRQ_MASK, 0x0000DC00);
 	b43_write32(dev, B43_MMIO_DMA5_IRQ_MASK, 0x0000DC00);
 
-	value32 = ssb_read32(dev->dev, SSB_TMSLOW);
-	value32 |= 0x00100000;
-	ssb_write32(dev->dev, SSB_TMSLOW, value32);
+	b43_mac_phy_clock_set(dev, true);
 
 	b43_write16(dev, B43_MMIO_POWERUP_DELAY,
 		    dev->dev->bus->chipco.fast_pwrup_delay);
diff --git a/drivers/net/wireless/b43/main.h b/drivers/net/wireless/b43/main.h
index 40db03678d9..a0d327f1318 100644
--- a/drivers/net/wireless/b43/main.h
+++ b/drivers/net/wireless/b43/main.h
@@ -133,6 +133,7 @@ void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags);
 
 void b43_mac_suspend(struct b43_wldev *dev);
 void b43_mac_enable(struct b43_wldev *dev);
+void b43_mac_phy_clock_set(struct b43_wldev *dev, bool on);
 
 
 struct b43_request_fw_context;
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 6755063f955..b075a3f82a4 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -3540,17 +3540,6 @@ static int b43_nphy_cal_rx_iq(struct b43_wldev *dev,
 		return b43_nphy_rev2_cal_rx_iq(dev, target, type, debug);
 }
 
-/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/MacPhyClkSet */
-static void b43_nphy_mac_phy_clock_set(struct b43_wldev *dev, bool on)
-{
-	u32 tmslow = ssb_read32(dev->dev, SSB_TMSLOW);
-	if (on)
-		tmslow |= B43_TMSLOW_MACPHYCLKEN;
-	else
-		tmslow &= ~B43_TMSLOW_MACPHYCLKEN;
-	ssb_write32(dev->dev, SSB_TMSLOW, tmslow);
-}
-
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RxCoreSetState */
 static void b43_nphy_set_rx_core_state(struct b43_wldev *dev, u8 mask)
 {
@@ -3691,7 +3680,7 @@ int b43_phy_initn(struct b43_wldev *dev)
 	b43_phy_write(dev, B43_NPHY_BBCFG, tmp & ~B43_NPHY_BBCFG_RSTCCA);
 	b43_nphy_bmac_clock_fgc(dev, 0);
 
-	b43_nphy_mac_phy_clock_set(dev, true);
+	b43_mac_phy_clock_set(dev, true);
 
 	b43_nphy_pa_override(dev, false);
 	b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RX2TX);
-- 
cgit v1.2.3


From f59a59fea3be78c2bda23cb7f55225b33c502c3c Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Tue, 10 May 2011 20:52:22 +0200
Subject: ath9k: fix a regression in PS frame filter handling

Only leave filtering enabled for AP or VLAN interfaces, clear the
destination mask for all other interfaces.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Reported-by: Ben Greear <greearb@candelatech.com>
Tested-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/main.c | 5 +++++
 drivers/net/wireless/ath/ath9k/xmit.c | 6 ++++++
 2 files changed, 11 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 9dd72d8c78e..33816091b43 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1782,6 +1782,11 @@ static int ath9k_sta_add(struct ieee80211_hw *hw,
 	struct ieee80211_key_conf ps_key = { };
 
 	ath_node_attach(sc, sta);
+
+	if (vif->type != NL80211_IFTYPE_AP &&
+	    vif->type != NL80211_IFTYPE_AP_VLAN)
+		return 0;
+
 	an->ps_key = ath_key_config(common, vif, sta, &ps_key);
 
 	return 0;
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 947d5b3b6e0..41469d7a2cd 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1845,6 +1845,7 @@ int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb,
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_sta *sta = info->control.sta;
+	struct ieee80211_vif *vif = info->control.vif;
 	struct ath_softc *sc = hw->priv;
 	struct ath_txq *txq = txctl->txq;
 	struct ath_buf *bf;
@@ -1882,6 +1883,11 @@ int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb,
 		memmove(skb->data, skb->data + padsize, padpos);
 	}
 
+	if ((vif && vif->type != NL80211_IFTYPE_AP &&
+	            vif->type != NL80211_IFTYPE_AP_VLAN) ||
+	    !ieee80211_is_data(hdr->frame_control))
+		info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
+
 	setup_frame_info(hw, skb, frmlen);
 
 	/*
-- 
cgit v1.2.3


From 1073e4ee595265086a592a056d903bf4fcc8885a Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Wed, 11 May 2011 02:08:09 +0200
Subject: bcma: add missing GPIO defines, use PULL register only when available
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Similar patch was commited to ssb.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/bcma/driver_chipcommon.c            | 6 ++++--
 include/linux/bcma/bcma_driver_chipcommon.h | 5 +++++
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/bcma/driver_chipcommon.c b/drivers/bcma/driver_chipcommon.c
index caf596091d4..606102256b4 100644
--- a/drivers/bcma/driver_chipcommon.c
+++ b/drivers/bcma/driver_chipcommon.c
@@ -29,8 +29,10 @@ void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
 	if (cc->core->id.rev >= 35)
 		cc->capabilities_ext = bcma_cc_read32(cc, BCMA_CC_CAP_EXT);
 
-	bcma_cc_write32(cc, 0x58, 0);
-	bcma_cc_write32(cc, 0x5C, 0);
+	if (cc->core->id.rev >= 20) {
+		bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
+		bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
+	}
 
 	if (cc->capabilities & BCMA_CC_CAP_PMU)
 		bcma_pmu_init(cc);
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
index 4f8fd6a4c1e..083c3b6cd5c 100644
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -113,6 +113,8 @@
 #define BCMA_CC_FLASHDATA		0x0048
 #define BCMA_CC_BCAST_ADDR		0x0050
 #define BCMA_CC_BCAST_DATA		0x0054
+#define BCMA_CC_GPIOPULLUP		0x0058		/* Rev >= 20 only */
+#define BCMA_CC_GPIOPULLDOWN		0x005C		/* Rev >= 20 only */
 #define BCMA_CC_GPIOIN			0x0060
 #define BCMA_CC_GPIOOUT			0x0064
 #define BCMA_CC_GPIOOUTEN		0x0068
@@ -121,6 +123,9 @@
 #define BCMA_CC_GPIOIRQ			0x0074
 #define BCMA_CC_WATCHDOG		0x0080
 #define BCMA_CC_GPIOTIMER		0x0088		/* LED powersave (corerev >= 16) */
+#define  BCMA_CC_GPIOTIMER_OFFTIME	0x0000FFFF
+#define  BCMA_CC_GPIOTIMER_OFFTIME_SHIFT	0
+#define  BCMA_CC_GPIOTIMER_ONTIME	0xFFFF0000
 #define  BCMA_CC_GPIOTIMER_ONTIME_SHIFT	16
 #define BCMA_CC_GPIOTOUTM		0x008C		/* LED powersave (corerev >= 16) */
 #define BCMA_CC_CLOCK_N			0x0090
-- 
cgit v1.2.3


From 8576f815d5c8beb8b10f96abe31831b90af3d352 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Wed, 11 May 2011 02:10:58 +0200
Subject: ssb: move ssb_commit_settings and export it
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Commiting settings is possible on devices without PCI core (but with CC
core). Export it for usage in drivers supporting other cores.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/ssb/driver_pcicore.c | 26 --------------------------
 drivers/ssb/main.c           | 25 +++++++++++++++++++++++++
 include/linux/ssb/ssb.h      |  1 +
 3 files changed, 26 insertions(+), 26 deletions(-)

diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index 8fde1220bc8..82feb348c8b 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -21,8 +21,6 @@ static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address);
 static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
 				u8 address, u16 data);
 
-static void ssb_commit_settings(struct ssb_bus *bus);
-
 static inline
 u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset)
 {
@@ -659,30 +657,6 @@ static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
 	pcicore_write32(pc, mdio_control, 0);
 }
 
-static void ssb_broadcast_value(struct ssb_device *dev,
-				u32 address, u32 data)
-{
-	/* This is used for both, PCI and ChipCommon core, so be careful. */
-	BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
-	BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
-
-	ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address);
-	ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */
-	ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data);
-	ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */
-}
-
-static void ssb_commit_settings(struct ssb_bus *bus)
-{
-	struct ssb_device *dev;
-
-	dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
-	if (WARN_ON(!dev))
-		return;
-	/* This forces an update of the cached registers. */
-	ssb_broadcast_value(dev, 0xFD8, 0);
-}
-
 int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
 				   struct ssb_device *dev)
 {
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index ad3da93a428..ee2937c4142 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -1329,6 +1329,31 @@ error:
 }
 EXPORT_SYMBOL(ssb_bus_powerup);
 
+static void ssb_broadcast_value(struct ssb_device *dev,
+				u32 address, u32 data)
+{
+	/* This is used for both, PCI and ChipCommon core, so be careful. */
+	BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
+	BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
+
+	ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address);
+	ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */
+	ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data);
+	ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */
+}
+
+void ssb_commit_settings(struct ssb_bus *bus)
+{
+	struct ssb_device *dev;
+
+	dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
+	if (WARN_ON(!dev))
+		return;
+	/* This forces an update of the cached registers. */
+	ssb_broadcast_value(dev, 0xFD8, 0);
+}
+EXPORT_SYMBOL(ssb_commit_settings);
+
 u32 ssb_admatch_base(u32 adm)
 {
 	u32 base = 0;
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 7e99b348834..f017b8900f7 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -518,6 +518,7 @@ extern int ssb_bus_may_powerdown(struct ssb_bus *bus);
  * Otherwise static always-on powercontrol will be used. */
 extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
 
+extern void ssb_commit_settings(struct ssb_bus *bus);
 
 /* Various helper functions */
 extern u32 ssb_admatch_base(u32 adm);
-- 
cgit v1.2.3


From 0fd82eafe3aa70937905b7e19e256409ae48477e Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Wed, 11 May 2011 02:10:59 +0200
Subject: b43: implement timeouts workaround
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Documented in: <4DCA7E40.9070709@lwfinger.net>

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 1e6a2add2aa..a96e05a8ef7 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4221,7 +4221,18 @@ static void b43_bluetooth_coext_disable(struct b43_wldev *dev)
 
 static void b43_imcfglo_timeouts_workaround(struct b43_wldev *dev)
 {
-	/* TODO: implement 80211 core workaround here */
+	struct ssb_bus *bus = dev->dev->bus;
+	u32 tmp;
+
+	if ((bus->chip_id == 0x4311 && bus->chip_rev == 2) ||
+	    (bus->chip_id == 0x4312)) {
+		tmp = ssb_read32(dev->dev, SSB_IMCFGLO);
+		tmp &= ~SSB_IMCFGLO_REQTO;
+		tmp &= ~SSB_IMCFGLO_SERTO;
+		tmp |= 0x3;
+		ssb_write32(dev->dev, SSB_IMCFGLO, tmp);
+		ssb_commit_settings(bus);
+	}
 }
 
 static void b43_set_synth_pu_delay(struct b43_wldev *dev, bool idle)
-- 
cgit v1.2.3


From c4859fbcfc12d5cfe8c30a33ad37d192a3093a7b Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Tue, 10 May 2011 20:47:35 -0700
Subject: mwifiex: remove redundant local structures

Avoid use of local structure in the function if the structure is
already allocated by the caller and the structure pointer is passed.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/sta_ioctl.c | 28 +++++++++-------------------
 1 file changed, 9 insertions(+), 19 deletions(-)

diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index 75bca56449c..d05907d0503 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -1250,11 +1250,9 @@ mwifiex_drv_get_driver_version(struct mwifiex_adapter *adapter, char *version,
 int mwifiex_get_signal_info(struct mwifiex_private *priv,
 			    struct mwifiex_ds_get_signal *signal)
 {
-	struct mwifiex_ds_get_signal info;
 	int status;
 
-	memset(&info, 0, sizeof(struct mwifiex_ds_get_signal));
-	info.selector = ALL_RSSI_INFO_MASK;
+	signal->selector = ALL_RSSI_INFO_MASK;
 
 	/* Signal info can be obtained only if connected */
 	if (!priv->media_connected) {
@@ -1267,13 +1265,10 @@ int mwifiex_get_signal_info(struct mwifiex_private *priv,
 				       HostCmd_ACT_GEN_GET, 0, signal);
 
 	if (!status) {
-		if (signal)
-			memcpy(signal, &info,
-			       sizeof(struct mwifiex_ds_get_signal));
-		if (info.selector & BCN_RSSI_AVG_MASK)
-			priv->w_stats.qual.level = info.bcn_rssi_avg;
-		if (info.selector & BCN_NF_AVG_MASK)
-			priv->w_stats.qual.noise = info.bcn_nf_avg;
+		if (signal->selector & BCN_RSSI_AVG_MASK)
+			priv->w_stats.qual.level = signal->bcn_rssi_avg;
+		if (signal->selector & BCN_NF_AVG_MASK)
+			priv->w_stats.qual.noise = signal->bcn_nf_avg;
 	}
 
 	return status;
@@ -1333,19 +1328,14 @@ mwifiex_get_stats_info(struct mwifiex_private *priv,
 		       struct mwifiex_ds_get_stats *log)
 {
 	int ret;
-	struct mwifiex_ds_get_stats get_log;
 
-	memset(&get_log, 0, sizeof(struct mwifiex_ds_get_stats));
 	ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_GET_LOG,
-				    HostCmd_ACT_GEN_GET, 0, &get_log);
+				    HostCmd_ACT_GEN_GET, 0, log);
 
 	if (!ret) {
-		if (log)
-			memcpy(log, &get_log, sizeof(struct
-					mwifiex_ds_get_stats));
-		priv->w_stats.discard.fragment = get_log.fcs_error;
-		priv->w_stats.discard.retries = get_log.retry;
-		priv->w_stats.discard.misc = get_log.ack_failure;
+		priv->w_stats.discard.fragment = log->fcs_error;
+		priv->w_stats.discard.retries = log->retry;
+		priv->w_stats.discard.misc = log->ack_failure;
 	}
 
 	return ret;
-- 
cgit v1.2.3


From a8c485652ad4217800015aab25f1b70b96adb1a9 Mon Sep 17 00:00:00 2001
From: Bing Zhao <bzhao@marvell.com>
Date: Tue, 10 May 2011 20:47:36 -0700
Subject: mwifiex: cleanup ioctl.h

Some structures and macros in ioctl.h are redundant or no longer
used.

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cfg80211.c |  9 +---
 drivers/net/wireless/mwifiex/fw.h       | 16 +------
 drivers/net/wireless/mwifiex/ioctl.h    | 81 +--------------------------------
 3 files changed, 4 insertions(+), 102 deletions(-)

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 19be8870c68..660831ce293 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -761,7 +761,6 @@ static int mwifiex_cfg80211_inform_ibss_bss(struct mwifiex_private *priv)
 static int mwifiex_inform_bss_from_scan_result(struct mwifiex_private *priv,
 					       struct mwifiex_802_11_ssid *ssid)
 {
-	struct mwifiex_scan_resp scan_resp;
 	struct mwifiex_bssdescriptor *scan_table;
 	int i, j;
 	struct ieee80211_channel *chan;
@@ -771,10 +770,6 @@ static int mwifiex_inform_bss_from_scan_result(struct mwifiex_private *priv,
 	int beacon_size;
 	u8 element_id, element_len;
 
-	memset(&scan_resp, 0, sizeof(scan_resp));
-	scan_resp.scan_table = (u8 *) priv->adapter->scan_table;
-	scan_resp.num_in_scan_table = priv->adapter->num_in_scan_table;
-
 #define MAX_IE_BUF	2048
 	ie_buf = kzalloc(MAX_IE_BUF, GFP_KERNEL);
 	if (!ie_buf) {
@@ -783,8 +778,8 @@ static int mwifiex_inform_bss_from_scan_result(struct mwifiex_private *priv,
 		return -ENOMEM;
 	}
 
-	scan_table = (struct mwifiex_bssdescriptor *) scan_resp.scan_table;
-	for (i = 0; i < scan_resp.num_in_scan_table; i++) {
+	scan_table = priv->adapter->scan_table;
+	for (i = 0; i < priv->adapter->num_in_scan_table; i++) {
 		if (ssid) {
 			/* Inform specific BSS only */
 			if (memcmp(ssid->ssid, scan_table[i].ssid.ssid,
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index c6b26819cd3..afdd145dff0 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -816,14 +816,7 @@ struct host_cmd_ds_txpwr_cfg {
 
 struct mwifiex_scan_cmd_config {
 	/*
-	 *  BSS Type to be sent in the firmware command
-	 *
-	 *  Field can be used to restrict the types of networks returned in the
-	 *    scan.  Valid settings are:
-	 *
-	 *   - MWIFIEX_SCAN_MODE_BSS  (infrastructure)
-	 *   - MWIFIEX_SCAN_MODE_IBSS (adhoc)
-	 *   - MWIFIEX_SCAN_MODE_ANY  (unrestricted, adhoc and infrastructure)
+	 *  BSS mode to be sent in the firmware command
 	 */
 	u8 bss_mode;
 
@@ -866,13 +859,6 @@ struct mwifiex_user_scan_cfg {
 	u8 keep_previous_scan;
 	/*
 	 *  BSS mode to be sent in the firmware command
-	 *
-	 *  Field can be used to restrict the types of networks returned in the
-	 *    scan.  Valid settings are:
-	 *
-	 *   - MWIFIEX_SCAN_MODE_BSS  (infrastructure)
-	 *   - MWIFIEX_SCAN_MODE_IBSS (adhoc)
-	 *   - MWIFIEX_SCAN_MODE_ANY  (unrestricted, adhoc and infrastructure)
 	 */
 	u8 bss_mode;
 	/* Configure the number of probe requests for active chan scans */
diff --git a/drivers/net/wireless/mwifiex/ioctl.h b/drivers/net/wireless/mwifiex/ioctl.h
index 5488e111fd2..7c1c5ee40eb 100644
--- a/drivers/net/wireless/mwifiex/ioctl.h
+++ b/drivers/net/wireless/mwifiex/ioctl.h
@@ -22,50 +22,17 @@
 
 #include <net/mac80211.h>
 
-enum {
-	MWIFIEX_SCAN_MODE_UNCHANGED = 0,
-	MWIFIEX_SCAN_MODE_BSS,
-	MWIFIEX_SCAN_MODE_IBSS,
-	MWIFIEX_SCAN_MODE_ANY
-};
-
 enum {
 	MWIFIEX_SCAN_TYPE_UNCHANGED = 0,
 	MWIFIEX_SCAN_TYPE_ACTIVE,
 	MWIFIEX_SCAN_TYPE_PASSIVE
 };
 
-struct mwifiex_get_scan_table_fixed {
-	u8 bssid[ETH_ALEN];
-	u8 channel;
-	u8 rssi;
-	long long network_tsf;
-};
-
-struct mwifiex_scan_time_params {
-	u32 specific_scan_time;
-	u32 active_scan_time;
-	u32 passive_scan_time;
-};
-
 struct mwifiex_user_scan {
 	u32 scan_cfg_len;
 	u8 scan_cfg_buf[1];
 };
 
-struct mwifiex_scan_req {
-	u32 scan_mode;
-	u32 scan_type;
-	struct mwifiex_802_11_ssid scan_ssid;
-	struct mwifiex_scan_time_params scan_time;
-	struct mwifiex_user_scan user_scan;
-};
-
-struct mwifiex_scan_resp {
-	u32 num_in_scan_table;
-	u8 *scan_table;
-};
-
 #define MWIFIEX_PROMISC_MODE            1
 #define MWIFIEX_MULTICAST_MODE		2
 #define	MWIFIEX_ALL_MULTI_MODE		4
@@ -77,18 +44,11 @@ struct mwifiex_multicast_list {
 	u8 mac_list[MWIFIEX_MAX_MULTICAST_LIST_SIZE][ETH_ALEN];
 };
 
-#define MWIFIEX_MAX_CHANNEL_NUM		128
-
 struct mwifiex_chan_freq {
 	u32 channel;
 	u32 freq;
 };
 
-struct mwifiex_chan_list {
-	u32 num_of_chan;
-	struct mwifiex_chan_freq cf[MWIFIEX_MAX_CHANNEL_NUM];
-};
-
 struct mwifiex_ssid_bssid {
 	struct mwifiex_802_11_ssid ssid;
 	u8 bssid[ETH_ALEN];
@@ -136,18 +96,8 @@ struct mwifiex_ds_get_stats {
 	u32 wep_icv_error[4];
 };
 
-#define BCN_RSSI_LAST_MASK              0x00000001
 #define BCN_RSSI_AVG_MASK               0x00000002
-#define DATA_RSSI_LAST_MASK             0x00000004
-#define DATA_RSSI_AVG_MASK              0x00000008
-#define BCN_SNR_LAST_MASK               0x00000010
-#define BCN_SNR_AVG_MASK                0x00000020
-#define DATA_SNR_LAST_MASK              0x00000040
-#define DATA_SNR_AVG_MASK               0x00000080
-#define BCN_NF_LAST_MASK                0x00000100
 #define BCN_NF_AVG_MASK                 0x00000200
-#define DATA_NF_LAST_MASK               0x00000400
-#define DATA_NF_AVG_MASK                0x00000800
 #define ALL_RSSI_INFO_MASK              0x00000fff
 
 struct mwifiex_ds_get_signal {
@@ -174,11 +124,6 @@ struct mwifiex_ds_get_signal {
 	s16 data_nf_avg;
 };
 
-struct mwifiex_fw_info {
-	u32 fw_ver;
-	u8 mac_addr[ETH_ALEN];
-};
-
 #define MWIFIEX_MAX_VER_STR_LEN    128
 
 struct mwifiex_ver_ext {
@@ -286,11 +231,6 @@ struct mwifiex_rate_cfg {
 	u32 rate;
 };
 
-struct mwifiex_data_rate {
-	u32 tx_data_rate;
-	u32 rx_data_rate;
-};
-
 struct mwifiex_power_cfg {
 	u32 is_power_auto;
 	u32 power_level;
@@ -309,21 +249,14 @@ struct mwifiex_ds_hs_cfg {
 };
 
 #define DEEP_SLEEP_ON  1
-#define DEEP_SLEEP_OFF 0
-
 #define DEEP_SLEEP_IDLE_TIME	100
+#define PS_MODE_AUTO		1
 
 struct mwifiex_ds_auto_ds {
 	u16 auto_ds;
 	u16 idle_time;
 };
 
-#define PS_MODE_UNCHANGED			0
-#define PS_MODE_AUTO				1
-#define PS_MODE_POLL				2
-#define PS_MODE_NULL				3
-
-
 struct mwifiex_ds_pm_cfg {
 	union {
 		u32 ps_mode;
@@ -333,18 +266,6 @@ struct mwifiex_ds_pm_cfg {
 	} param;
 };
 
-struct mwifiex_ioctl_wmm_queue_status_ac {
-	u8 wmm_acm;
-	u8 flow_required;
-	u8 flow_created;
-	u8 disabled;
-};
-
-struct mwifiex_ds_wmm_queue_status {
-	struct mwifiex_ioctl_wmm_queue_status_ac
-		ac_status[IEEE80211_MAX_QUEUES];
-};
-
 struct mwifiex_ds_11n_tx_cfg {
 	u16 tx_htcap;
 	u16 tx_htinfo;
-- 
cgit v1.2.3


From 6bdbdbf4a151a3a1333818cd17a7d7795e936041 Mon Sep 17 00:00:00 2001
From: Sascha Silbe <silbe@activitycentral.com>
Date: Wed, 11 May 2011 14:52:34 +0200
Subject: libertas: Add libertas_disablemesh module parameter to disable mesh
 interface

This allows individual users and deployments to disable mesh support at
runtime, i.e. without having to build and maintain a custom kernel.

Based on a patch by Paul Fox <pgf@laptop.org>.
Signed-off-by: Sascha Silbe <silbe@activitycentral.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/libertas/main.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 84d05a765b5..8c40949cb07 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -36,6 +36,10 @@ unsigned int lbs_debug;
 EXPORT_SYMBOL_GPL(lbs_debug);
 module_param_named(libertas_debug, lbs_debug, int, 0644);
 
+unsigned int lbs_disablemesh;
+EXPORT_SYMBOL_GPL(lbs_disablemesh);
+module_param_named(libertas_disablemesh, lbs_disablemesh, int, 0644);
+
 
 /*
  * This global structure is used to send the confirm_sleep command as
@@ -944,7 +948,10 @@ int lbs_start_card(struct lbs_private *priv)
 
 	lbs_update_channel(priv);
 
-	lbs_init_mesh(priv);
+	if (!lbs_disablemesh)
+		lbs_init_mesh(priv);
+	else
+		pr_info("%s: mesh disabled\n", dev->name);
 
 	lbs_debugfs_init_one(priv, dev);
 
-- 
cgit v1.2.3


From 807f8a8c300435d5483e8d78df9dcdbc27333166 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Wed, 11 May 2011 17:09:35 +0300
Subject: cfg80211/nl80211: add support for scheduled scans

Implement new functionality for scheduled scan offload.  With this feature we
can scan automatically at certain intervals.

The idea is that the hardware can perform scan automatically and filter on
desired results without waking up the host unnecessarily.

Add NL80211_CMD_START_SCHED_SCAN and NL80211_CMD_STOP_SCHED_SCAN
commands to the nl80211 interface.  When results are available they are
reported by NL80211_CMD_SCHED_SCAN_RESULTS events.  The userspace is
informed when the scheduled scan has stopped with a
NL80211_CMD_SCHED_SCAN_STOPPED event, which can be triggered either by
the driver or by a call to NL80211_CMD_STOP_SCHED_SCAN.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/nl80211.h |  25 +++++
 include/net/cfg80211.h  |  57 +++++++++++
 net/wireless/core.c     |  12 ++-
 net/wireless/core.h     |   7 ++
 net/wireless/nl80211.c  | 250 ++++++++++++++++++++++++++++++++++++++++++++++++
 net/wireless/nl80211.h  |   4 +
 net/wireless/scan.c     |  70 ++++++++++++++
 7 files changed, 424 insertions(+), 1 deletion(-)

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index de96783954a..f8b5595ba4a 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -203,6 +203,26 @@
  * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
  *	partial scan results may be available
  *
+ * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan.  Like with normal
+ *	scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS) are passed, they are used
+ *	in the probe requests.  For broadcast, a broadcast SSID must be
+ *	passed (ie. an empty string).  If no SSID is passed, no probe
+ *	requests are sent and a passive scan is performed.
+ *	%NL80211_ATTR_SCAN_FREQUENCIES, if passed, define which channels
+ *	should be scanned; if not passed, all channels allowed for the
+ *	current regulatory domain are used.  Extra IEs can also be passed
+ *	from the userspace by using the %NL80211_ATTR_IE attribute.
+ * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan
+ * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
+ *	results available.
+ * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
+ *	stopped.  The driver may issue this event at any time during a
+ *	scheduled scan.  One reason for stopping the scan is if the hardware
+ *	does not support starting an association or a normal scan while running
+ *	a scheduled scan.  This event is also sent when the
+ *	%NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
+ *	is brought down while a scheduled scan was running.
+ *
  * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
  *      or noise level
  * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
@@ -545,6 +565,11 @@ enum nl80211_commands {
 	NL80211_CMD_GET_WOWLAN,
 	NL80211_CMD_SET_WOWLAN,
 
+	NL80211_CMD_START_SCHED_SCAN,
+	NL80211_CMD_STOP_SCHED_SCAN,
+	NL80211_CMD_SCHED_SCAN_RESULTS,
+	NL80211_CMD_SCHED_SCAN_STOPPED,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 4b0d035be64..e214c85b74d 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -823,6 +823,33 @@ struct cfg80211_scan_request {
 	struct ieee80211_channel *channels[0];
 };
 
+/**
+ * struct cfg80211_sched_scan_request - scheduled scan request description
+ *
+ * @ssids: SSIDs to scan for (passed in the probe_reqs in active scans)
+ * @n_ssids: number of SSIDs
+ * @n_channels: total number of channels to scan
+ * @ie: optional information element(s) to add into Probe Request or %NULL
+ * @ie_len: length of ie in octets
+ * @wiphy: the wiphy this was for
+ * @dev: the interface
+ * @channels: channels to scan
+ */
+struct cfg80211_sched_scan_request {
+	struct cfg80211_ssid *ssids;
+	int n_ssids;
+	u32 n_channels;
+	const u8 *ie;
+	size_t ie_len;
+
+	/* internal */
+	struct wiphy *wiphy;
+	struct net_device *dev;
+
+	/* keep last */
+	struct ieee80211_channel *channels[0];
+};
+
 /**
  * enum cfg80211_signal_type - signal type
  *
@@ -1292,6 +1319,10 @@ struct cfg80211_wowlan {
  * @set_power_mgmt: Configure WLAN power management. A timeout value of -1
  *	allows the driver to adjust the dynamic ps timeout value.
  * @set_cqm_rssi_config: Configure connection quality monitor RSSI threshold.
+ * @sched_scan_start: Tell the driver to start a scheduled scan.
+ * @sched_scan_stop: Tell the driver to stop an ongoing scheduled
+ *	scan.  The driver_initiated flag specifies whether the driver
+ *	itself has informed that the scan has stopped.
  *
  * @mgmt_frame_register: Notify driver that a management frame type was
  *	registered. Note that this callback may not sleep, and cannot run
@@ -1478,6 +1509,12 @@ struct cfg80211_ops {
 	int	(*set_ringparam)(struct wiphy *wiphy, u32 tx, u32 rx);
 	void	(*get_ringparam)(struct wiphy *wiphy,
 				 u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max);
+
+	int	(*sched_scan_start)(struct wiphy *wiphy,
+				struct net_device *dev,
+				struct cfg80211_sched_scan_request *request);
+	int	(*sched_scan_stop)(struct wiphy *wiphy, struct net_device *dev,
+				   bool driver_initiated);
 };
 
 /*
@@ -1522,6 +1559,7 @@ struct cfg80211_ops {
  * @WIPHY_FLAG_IBSS_RSN: The device supports IBSS RSN.
  * @WIPHY_FLAG_MESH_AUTH: The device supports mesh authentication by routing
  *	auth frames to userspace. See @NL80211_MESH_SETUP_USERSPACE_AUTH.
+ * @WIPHY_FLAG_SCHED_SCAN: The device supports scheduled scans.
  */
 enum wiphy_flags {
 	WIPHY_FLAG_CUSTOM_REGULATORY		= BIT(0),
@@ -1534,6 +1572,7 @@ enum wiphy_flags {
 	WIPHY_FLAG_CONTROL_PORT_PROTOCOL	= BIT(7),
 	WIPHY_FLAG_IBSS_RSN			= BIT(8),
 	WIPHY_FLAG_MESH_AUTH			= BIT(10),
+	WIPHY_FLAG_SUPPORTS_SCHED_SCAN		= BIT(11),
 };
 
 struct mac_address {
@@ -2354,6 +2393,24 @@ int cfg80211_wext_siwpmksa(struct net_device *dev,
  */
 void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted);
 
+/**
+ * cfg80211_sched_scan_results - notify that new scan results are available
+ *
+ * @wiphy: the wiphy which got scheduled scan results
+ */
+void cfg80211_sched_scan_results(struct wiphy *wiphy);
+
+/**
+ * cfg80211_sched_scan_stopped - notify that the scheduled scan has stopped
+ *
+ * @wiphy: the wiphy on which the scheduled scan stopped
+ *
+ * The driver can call this function to inform cfg80211 that the
+ * scheduled scan had to be stopped, for whatever reason.  The driver
+ * is then called back via the sched_scan_stop operation when done.
+ */
+void cfg80211_sched_scan_stopped(struct wiphy *wiphy);
+
 /**
  * cfg80211_inform_bss_frame - inform cfg80211 of a received BSS frame
  *
diff --git a/net/wireless/core.c b/net/wireless/core.c
index bea0d80710c..f924a49b242 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -370,7 +370,8 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv)
 	spin_lock_init(&rdev->bss_lock);
 	INIT_LIST_HEAD(&rdev->bss_list);
 	INIT_WORK(&rdev->scan_done_wk, __cfg80211_scan_done);
-
+	INIT_WORK(&rdev->sched_scan_results_wk, __cfg80211_sched_scan_results);
+	INIT_WORK(&rdev->sched_scan_stopped_wk, __cfg80211_sched_scan_stopped);
 #ifdef CONFIG_CFG80211_WEXT
 	rdev->wiphy.wext = &cfg80211_wext_handler;
 #endif
@@ -672,6 +673,11 @@ static void wdev_cleanup_work(struct work_struct *work)
 		___cfg80211_scan_done(rdev, true);
 	}
 
+	if (WARN_ON(rdev->sched_scan_req &&
+		    rdev->sched_scan_req->dev == wdev->netdev)) {
+		__cfg80211_stop_sched_scan(rdev, false);
+	}
+
 	cfg80211_unlock_rdev(rdev);
 
 	mutex_lock(&rdev->devlist_mtx);
@@ -759,6 +765,10 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
 			break;
 		case NL80211_IFTYPE_P2P_CLIENT:
 		case NL80211_IFTYPE_STATION:
+			cfg80211_lock_rdev(rdev);
+			__cfg80211_stop_sched_scan(rdev, false);
+			cfg80211_unlock_rdev(rdev);
+
 			wdev_lock(wdev);
 #ifdef CONFIG_CFG80211_WEXT
 			kfree(wdev->wext.ie);
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 7a18c10a7fb..e3f7b1d995c 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -60,8 +60,11 @@ struct cfg80211_registered_device {
 	struct rb_root bss_tree;
 	u32 bss_generation;
 	struct cfg80211_scan_request *scan_req; /* protected by RTNL */
+	struct cfg80211_sched_scan_request *sched_scan_req;
 	unsigned long suspend_at;
 	struct work_struct scan_done_wk;
+	struct work_struct sched_scan_results_wk;
+	struct work_struct sched_scan_stopped_wk;
 
 #ifdef CONFIG_NL80211_TESTMODE
 	struct genl_info *testmode_info;
@@ -411,6 +414,10 @@ void cfg80211_sme_rx_auth(struct net_device *dev, const u8 *buf, size_t len);
 void cfg80211_sme_disassoc(struct net_device *dev, int idx);
 void __cfg80211_scan_done(struct work_struct *wk);
 void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, bool leak);
+void __cfg80211_sched_scan_results(struct work_struct *wk);
+int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev,
+			       bool driver_initiated);
+void __cfg80211_sched_scan_stopped(struct work_struct *wk);
 void cfg80211_upload_connect_keys(struct wireless_dev *wdev);
 int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
 			  struct net_device *dev, enum nl80211_iftype ntype,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 95dd5832e71..4fac370284c 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -761,6 +761,8 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 	}
 	CMD(set_channel, SET_CHANNEL);
 	CMD(set_wds_peer, SET_WDS_PEER);
+	if (dev->wiphy.flags & WIPHY_FLAG_SUPPORTS_SCHED_SCAN)
+		CMD(sched_scan_start, START_SCHED_SCAN);
 
 #undef CMD
 
@@ -3357,6 +3359,179 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
 	return err;
 }
 
+static int nl80211_start_sched_scan(struct sk_buff *skb,
+				    struct genl_info *info)
+{
+	struct cfg80211_sched_scan_request *request;
+	struct cfg80211_registered_device *rdev = info->user_ptr[0];
+	struct net_device *dev = info->user_ptr[1];
+	struct cfg80211_ssid *ssid;
+	struct ieee80211_channel *channel;
+	struct nlattr *attr;
+	struct wiphy *wiphy;
+	int err, tmp, n_ssids = 0, n_channels, i;
+	enum ieee80211_band band;
+	size_t ie_len;
+
+	if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_SCHED_SCAN) ||
+	    !rdev->ops->sched_scan_start)
+		return -EOPNOTSUPP;
+
+	if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
+		return -EINVAL;
+
+	if (rdev->sched_scan_req)
+		return -EINPROGRESS;
+
+	wiphy = &rdev->wiphy;
+
+	if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
+		n_channels = validate_scan_freqs(
+				info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]);
+		if (!n_channels)
+			return -EINVAL;
+	} else {
+		n_channels = 0;
+
+		for (band = 0; band < IEEE80211_NUM_BANDS; band++)
+			if (wiphy->bands[band])
+				n_channels += wiphy->bands[band]->n_channels;
+	}
+
+	if (info->attrs[NL80211_ATTR_SCAN_SSIDS])
+		nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS],
+				    tmp)
+			n_ssids++;
+
+	if (n_ssids > wiphy->max_scan_ssids)
+		return -EINVAL;
+
+	if (info->attrs[NL80211_ATTR_IE])
+		ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
+	else
+		ie_len = 0;
+
+	if (ie_len > wiphy->max_scan_ie_len)
+		return -EINVAL;
+
+	request = kzalloc(sizeof(*request)
+			+ sizeof(*ssid) * n_ssids
+			+ sizeof(channel) * n_channels
+			+ ie_len, GFP_KERNEL);
+	if (!request)
+		return -ENOMEM;
+
+	if (n_ssids)
+		request->ssids = (void *)&request->channels[n_channels];
+	request->n_ssids = n_ssids;
+	if (ie_len) {
+		if (request->ssids)
+			request->ie = (void *)(request->ssids + n_ssids);
+		else
+			request->ie = (void *)(request->channels + n_channels);
+	}
+
+	i = 0;
+	if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
+		/* user specified, bail out if channel not found */
+		nla_for_each_nested(attr,
+				    info->attrs[NL80211_ATTR_SCAN_FREQUENCIES],
+				    tmp) {
+			struct ieee80211_channel *chan;
+
+			chan = ieee80211_get_channel(wiphy, nla_get_u32(attr));
+
+			if (!chan) {
+				err = -EINVAL;
+				goto out_free;
+			}
+
+			/* ignore disabled channels */
+			if (chan->flags & IEEE80211_CHAN_DISABLED)
+				continue;
+
+			request->channels[i] = chan;
+			i++;
+		}
+	} else {
+		/* all channels */
+		for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+			int j;
+			if (!wiphy->bands[band])
+				continue;
+			for (j = 0; j < wiphy->bands[band]->n_channels; j++) {
+				struct ieee80211_channel *chan;
+
+				chan = &wiphy->bands[band]->channels[j];
+
+				if (chan->flags & IEEE80211_CHAN_DISABLED)
+					continue;
+
+				request->channels[i] = chan;
+				i++;
+			}
+		}
+	}
+
+	if (!i) {
+		err = -EINVAL;
+		goto out_free;
+	}
+
+	request->n_channels = i;
+
+	i = 0;
+	if (info->attrs[NL80211_ATTR_SCAN_SSIDS]) {
+		nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS],
+				    tmp) {
+			if (request->ssids[i].ssid_len >
+			    IEEE80211_MAX_SSID_LEN) {
+				err = -EINVAL;
+				goto out_free;
+			}
+			memcpy(request->ssids[i].ssid, nla_data(attr),
+			       nla_len(attr));
+			request->ssids[i].ssid_len = nla_len(attr);
+			i++;
+		}
+	}
+
+	if (info->attrs[NL80211_ATTR_IE]) {
+		request->ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
+		memcpy((void *)request->ie,
+		       nla_data(info->attrs[NL80211_ATTR_IE]),
+		       request->ie_len);
+	}
+
+	request->dev = dev;
+	request->wiphy = &rdev->wiphy;
+
+	err = rdev->ops->sched_scan_start(&rdev->wiphy, dev, request);
+	if (!err) {
+		rdev->sched_scan_req = request;
+		nl80211_send_sched_scan(rdev, dev,
+					NL80211_CMD_START_SCHED_SCAN);
+		goto out;
+	}
+
+out_free:
+	kfree(request);
+out:
+	return err;
+}
+
+static int nl80211_stop_sched_scan(struct sk_buff *skb,
+				   struct genl_info *info)
+{
+	struct cfg80211_registered_device *rdev = info->user_ptr[0];
+
+	if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_SCHED_SCAN) ||
+	    !rdev->ops->sched_scan_stop)
+		return -EOPNOTSUPP;
+
+	return __cfg80211_stop_sched_scan(rdev, false);
+}
+
 static int nl80211_send_bss(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 			    struct cfg80211_registered_device *rdev,
 			    struct wireless_dev *wdev,
@@ -5326,6 +5501,22 @@ static struct genl_ops nl80211_ops[] = {
 		.policy = nl80211_policy,
 		.dumpit = nl80211_dump_scan,
 	},
+	{
+		.cmd = NL80211_CMD_START_SCHED_SCAN,
+		.doit = nl80211_start_sched_scan,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+				  NL80211_FLAG_NEED_RTNL,
+	},
+	{
+		.cmd = NL80211_CMD_STOP_SCHED_SCAN,
+		.doit = nl80211_stop_sched_scan,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+				  NL80211_FLAG_NEED_RTNL,
+	},
 	{
 		.cmd = NL80211_CMD_AUTHENTICATE,
 		.doit = nl80211_authenticate,
@@ -5652,6 +5843,28 @@ static int nl80211_send_scan_msg(struct sk_buff *msg,
 	return -EMSGSIZE;
 }
 
+static int
+nl80211_send_sched_scan_msg(struct sk_buff *msg,
+			    struct cfg80211_registered_device *rdev,
+			    struct net_device *netdev,
+			    u32 pid, u32 seq, int flags, u32 cmd)
+{
+	void *hdr;
+
+	hdr = nl80211hdr_put(msg, pid, seq, flags, cmd);
+	if (!hdr)
+		return -1;
+
+	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
+	NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
+
+	return genlmsg_end(msg, hdr);
+
+ nla_put_failure:
+	genlmsg_cancel(msg, hdr);
+	return -EMSGSIZE;
+}
+
 void nl80211_send_scan_start(struct cfg80211_registered_device *rdev,
 			     struct net_device *netdev)
 {
@@ -5709,6 +5922,43 @@ void nl80211_send_scan_aborted(struct cfg80211_registered_device *rdev,
 				nl80211_scan_mcgrp.id, GFP_KERNEL);
 }
 
+void nl80211_send_sched_scan_results(struct cfg80211_registered_device *rdev,
+				     struct net_device *netdev)
+{
+	struct sk_buff *msg;
+
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+	if (!msg)
+		return;
+
+	if (nl80211_send_sched_scan_msg(msg, rdev, netdev, 0, 0, 0,
+					NL80211_CMD_SCHED_SCAN_RESULTS) < 0) {
+		nlmsg_free(msg);
+		return;
+	}
+
+	genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+				nl80211_scan_mcgrp.id, GFP_KERNEL);
+}
+
+void nl80211_send_sched_scan(struct cfg80211_registered_device *rdev,
+			     struct net_device *netdev, u32 cmd)
+{
+	struct sk_buff *msg;
+
+	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	if (!msg)
+		return;
+
+	if (nl80211_send_sched_scan_msg(msg, rdev, netdev, 0, 0, 0, cmd) < 0) {
+		nlmsg_free(msg);
+		return;
+	}
+
+	genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+				nl80211_scan_mcgrp.id, GFP_KERNEL);
+}
+
 /*
  * This can happen on global regulatory changes or device specific settings
  * based on custom world regulatory domains.
diff --git a/net/wireless/nl80211.h b/net/wireless/nl80211.h
index f2af6955a66..2f1bfb87a65 100644
--- a/net/wireless/nl80211.h
+++ b/net/wireless/nl80211.h
@@ -12,6 +12,10 @@ void nl80211_send_scan_done(struct cfg80211_registered_device *rdev,
 			    struct net_device *netdev);
 void nl80211_send_scan_aborted(struct cfg80211_registered_device *rdev,
 			       struct net_device *netdev);
+void nl80211_send_sched_scan(struct cfg80211_registered_device *rdev,
+			     struct net_device *netdev, u32 cmd);
+void nl80211_send_sched_scan_results(struct cfg80211_registered_device *rdev,
+				     struct net_device *netdev);
 void nl80211_send_reg_change_event(struct regulatory_request *request);
 void nl80211_send_rx_auth(struct cfg80211_registered_device *rdev,
 			  struct net_device *netdev,
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 62e542a2b19..65dfae3b9d4 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -93,6 +93,76 @@ void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted)
 }
 EXPORT_SYMBOL(cfg80211_scan_done);
 
+void __cfg80211_sched_scan_results(struct work_struct *wk)
+{
+	struct cfg80211_registered_device *rdev;
+
+	rdev = container_of(wk, struct cfg80211_registered_device,
+			    sched_scan_results_wk);
+
+	cfg80211_lock_rdev(rdev);
+
+	/* we don't have sched_scan_req anymore if the scan is stopping */
+	if (rdev->sched_scan_req)
+		nl80211_send_sched_scan_results(rdev,
+						rdev->sched_scan_req->dev);
+
+	cfg80211_unlock_rdev(rdev);
+}
+
+void cfg80211_sched_scan_results(struct wiphy *wiphy)
+{
+	/* ignore if we're not scanning */
+	if (wiphy_to_dev(wiphy)->sched_scan_req)
+		queue_work(cfg80211_wq,
+			   &wiphy_to_dev(wiphy)->sched_scan_results_wk);
+}
+EXPORT_SYMBOL(cfg80211_sched_scan_results);
+
+void __cfg80211_sched_scan_stopped(struct work_struct *wk)
+{
+	struct cfg80211_registered_device *rdev;
+
+	rdev = container_of(wk, struct cfg80211_registered_device,
+			    sched_scan_stopped_wk);
+
+	cfg80211_lock_rdev(rdev);
+	__cfg80211_stop_sched_scan(rdev, true);
+	cfg80211_unlock_rdev(rdev);
+}
+
+void cfg80211_sched_scan_stopped(struct wiphy *wiphy)
+{
+	queue_work(cfg80211_wq, &wiphy_to_dev(wiphy)->sched_scan_stopped_wk);
+}
+EXPORT_SYMBOL(cfg80211_sched_scan_stopped);
+
+int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev,
+			       bool driver_initiated)
+{
+	int err;
+	struct net_device *dev;
+
+	ASSERT_RDEV_LOCK(rdev);
+
+	if (!rdev->sched_scan_req)
+		return 0;
+
+	dev = rdev->sched_scan_req->dev;
+
+	err = rdev->ops->sched_scan_stop(&rdev->wiphy, dev,
+					 driver_initiated);
+	if (err)
+		return err;
+
+	nl80211_send_sched_scan(rdev, dev, NL80211_CMD_SCHED_SCAN_STOPPED);
+
+	kfree(rdev->sched_scan_req);
+	rdev->sched_scan_req = NULL;
+
+	return err;
+}
+
 static void bss_release(struct kref *ref)
 {
 	struct cfg80211_internal_bss *bss;
-- 
cgit v1.2.3


From 79f460ca49d8d5700756ab7071c951311c7f29cc Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Wed, 11 May 2011 17:09:36 +0300
Subject: mac80211: add support for HW scheduled scan

Implement support for HW scheduled scan.  The mac80211 code doesn't perform
scheduled scans itself, but calls the driver to start and stop scheduled
scans.

This patch also creates a trace event class to be used by drv_hw_scan
and the new drv_sched_scan_start and drv_sched_stop functions, in
order to avoid duplicate code.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/net/mac80211.h      | 50 +++++++++++++++++++++++
 net/mac80211/cfg.c          | 27 +++++++++++++
 net/mac80211/driver-ops.h   | 29 ++++++++++++-
 net/mac80211/driver-trace.h | 88 +++++++++++++++++++++++++++++++---------
 net/mac80211/ieee80211_i.h  |  9 +++++
 net/mac80211/main.c         |  6 ++-
 net/mac80211/rx.c           |  6 ++-
 net/mac80211/scan.c         | 99 +++++++++++++++++++++++++++++++++++++++++++++
 8 files changed, 292 insertions(+), 22 deletions(-)

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 9e5542794b9..62a1c225b7c 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -537,6 +537,21 @@ struct ieee80211_tx_info {
 	};
 };
 
+/**
+ * ieee80211_sched_scan_ies - scheduled scan IEs
+ *
+ * This structure is used to pass the appropriate IEs to be used in scheduled
+ * scans for all bands.  It contains both the IEs passed from the userspace
+ * and the ones generated by mac80211.
+ *
+ * @ie: array with the IEs for each supported band
+ * @len: array with the total length of the IEs for each band
+ */
+struct ieee80211_sched_scan_ies {
+	u8 *ie[IEEE80211_NUM_BANDS];
+	size_t len[IEEE80211_NUM_BANDS];
+};
+
 static inline struct ieee80211_tx_info *IEEE80211_SKB_CB(struct sk_buff *skb)
 {
 	return (struct ieee80211_tx_info *)skb->cb;
@@ -1693,6 +1708,13 @@ enum ieee80211_ampdu_mlme_action {
  *	any error unless this callback returned a negative error code.
  *	The callback can sleep.
  *
+ * @sched_scan_start: Ask the hardware to start scanning repeatedly at
+ *	specific intervals.  The driver must call the
+ *	ieee80211_sched_scan_results() function whenever it finds results.
+ *	This process will continue until sched_scan_stop is called.
+ *
+ * @sched_scan_stop: Tell the hardware to stop an ongoing scheduled scan.
+ *
  * @sw_scan_start: Notifier function that is called just before a software scan
  *	is started. Can be NULL, if the driver doesn't need this notification.
  *	The callback can sleep.
@@ -1877,6 +1899,12 @@ struct ieee80211_ops {
 				u32 iv32, u16 *phase1key);
 	int (*hw_scan)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		       struct cfg80211_scan_request *req);
+	int (*sched_scan_start)(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif,
+				struct cfg80211_sched_scan_request *req,
+				struct ieee80211_sched_scan_ies *ies);
+	void (*sched_scan_stop)(struct ieee80211_hw *hw,
+			       struct ieee80211_vif *vif);
 	void (*sw_scan_start)(struct ieee80211_hw *hw);
 	void (*sw_scan_complete)(struct ieee80211_hw *hw);
 	int (*get_stats)(struct ieee80211_hw *hw,
@@ -2593,6 +2621,28 @@ void ieee80211_wake_queues(struct ieee80211_hw *hw);
  */
 void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted);
 
+/**
+ * ieee80211_sched_scan_results - got results from scheduled scan
+ *
+ * When a scheduled scan is running, this function needs to be called by the
+ * driver whenever there are new scan results available.
+ *
+ * @hw: the hardware that is performing scheduled scans
+ */
+void ieee80211_sched_scan_results(struct ieee80211_hw *hw);
+
+/**
+ * ieee80211_sched_scan_stopped - inform that the scheduled scan has stopped
+ *
+ * When a scheduled scan is running, this function can be called by
+ * the driver if it needs to stop the scan to perform another task.
+ * Usual scenarios are drivers that cannot continue the scheduled scan
+ * while associating, for instance.
+ *
+ * @hw: the hardware that is performing scheduled scans
+ */
+void ieee80211_sched_scan_stopped(struct ieee80211_hw *hw);
+
 /**
  * ieee80211_iterate_active_interfaces - iterate active interfaces
  *
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index c416cce5e1e..a2ff47493e0 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1362,6 +1362,31 @@ static int ieee80211_scan(struct wiphy *wiphy,
 	return ieee80211_request_scan(sdata, req);
 }
 
+static int
+ieee80211_sched_scan_start(struct wiphy *wiphy,
+			   struct net_device *dev,
+			   struct cfg80211_sched_scan_request *req)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+	if (!sdata->local->ops->sched_scan_start)
+		return -EOPNOTSUPP;
+
+	return ieee80211_request_sched_scan_start(sdata, req);
+}
+
+static int
+ieee80211_sched_scan_stop(struct wiphy *wiphy, struct net_device *dev,
+			  bool driver_initiated)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+	if (!sdata->local->ops->sched_scan_stop)
+		return -EOPNOTSUPP;
+
+	return ieee80211_request_sched_scan_stop(sdata, driver_initiated);
+}
+
 static int ieee80211_auth(struct wiphy *wiphy, struct net_device *dev,
 			  struct cfg80211_auth_request *req)
 {
@@ -2103,6 +2128,8 @@ struct cfg80211_ops mac80211_config_ops = {
 	.suspend = ieee80211_suspend,
 	.resume = ieee80211_resume,
 	.scan = ieee80211_scan,
+	.sched_scan_start = ieee80211_sched_scan_start,
+	.sched_scan_stop = ieee80211_sched_scan_stop,
 	.auth = ieee80211_auth,
 	.assoc = ieee80211_assoc,
 	.deauth = ieee80211_deauth,
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index aa16bd8ef78..eebf7a67daf 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -212,12 +212,39 @@ static inline int drv_hw_scan(struct ieee80211_local *local,
 
 	might_sleep();
 
-	trace_drv_hw_scan(local, sdata, req);
+	trace_drv_hw_scan(local, sdata);
 	ret = local->ops->hw_scan(&local->hw, &sdata->vif, req);
 	trace_drv_return_int(local, ret);
 	return ret;
 }
 
+static inline int
+drv_sched_scan_start(struct ieee80211_local *local,
+		     struct ieee80211_sub_if_data *sdata,
+		     struct cfg80211_sched_scan_request *req,
+		     struct ieee80211_sched_scan_ies *ies)
+{
+	int ret;
+
+	might_sleep();
+
+	trace_drv_sched_scan_start(local, sdata);
+	ret = local->ops->sched_scan_start(&local->hw, &sdata->vif,
+					      req, ies);
+	trace_drv_return_int(local, ret);
+	return ret;
+}
+
+static inline void drv_sched_scan_stop(struct ieee80211_local *local,
+				       struct ieee80211_sub_if_data *sdata)
+{
+	might_sleep();
+
+	trace_drv_sched_scan_stop(local, sdata);
+	local->ops->sched_scan_stop(&local->hw, &sdata->vif);
+	trace_drv_return_void(local);
+}
+
 static inline void drv_sw_scan_start(struct ieee80211_local *local)
 {
 	might_sleep();
diff --git a/net/mac80211/driver-trace.h b/net/mac80211/driver-trace.h
index dd9779d41d2..ed9edcbd9aa 100644
--- a/net/mac80211/driver-trace.h
+++ b/net/mac80211/driver-trace.h
@@ -98,6 +98,27 @@ DECLARE_EVENT_CLASS(local_u32_evt,
 	)
 );
 
+DECLARE_EVENT_CLASS(local_sdata_evt,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata),
+	TP_ARGS(local, sdata),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		VIF_ENTRY
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		VIF_ASSIGN;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT VIF_PR_FMT,
+		LOCAL_PR_ARG, VIF_PR_ARG
+	)
+);
+
 DEFINE_EVENT(local_only_evt, drv_return_void,
 	TP_PROTO(struct ieee80211_local *local),
 	TP_ARGS(local)
@@ -433,27 +454,22 @@ TRACE_EVENT(drv_update_tkip_key,
 	)
 );
 
-TRACE_EVENT(drv_hw_scan,
+DEFINE_EVENT(local_sdata_evt, drv_hw_scan,
 	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sub_if_data *sdata,
-		 struct cfg80211_scan_request *req),
-
-	TP_ARGS(local, sdata, req),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		VIF_ENTRY
-	),
+		 struct ieee80211_sub_if_data *sdata),
+	TP_ARGS(local, sdata)
+);
 
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		VIF_ASSIGN;
-	),
+DEFINE_EVENT(local_sdata_evt, drv_sched_scan_start,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata),
+	TP_ARGS(local, sdata)
+);
 
-	TP_printk(
-		LOCAL_PR_FMT VIF_PR_FMT,
-		LOCAL_PR_ARG,VIF_PR_ARG
-	)
+DEFINE_EVENT(local_sdata_evt, drv_sched_scan_stop,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata),
+	TP_ARGS(local, sdata)
 );
 
 DEFINE_EVENT(local_only_evt, drv_sw_scan_start,
@@ -1180,6 +1196,42 @@ TRACE_EVENT(api_scan_completed,
 	)
 );
 
+TRACE_EVENT(api_sched_scan_results,
+	TP_PROTO(struct ieee80211_local *local),
+
+	TP_ARGS(local),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT, LOCAL_PR_ARG
+	)
+);
+
+TRACE_EVENT(api_sched_scan_stopped,
+	TP_PROTO(struct ieee80211_local *local),
+
+	TP_ARGS(local),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT, LOCAL_PR_ARG
+	)
+);
+
 TRACE_EVENT(api_sta_block_awake,
 	TP_PROTO(struct ieee80211_local *local,
 		 struct ieee80211_sta *sta, bool block),
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 7f4d0dc1d53..6f55a789c09 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -847,6 +847,9 @@ struct ieee80211_local {
 	int scan_channel_idx;
 	int scan_ies_len;
 
+	bool sched_scanning;
+	struct ieee80211_sched_scan_ies sched_scan_ies;
+
 	unsigned long leave_oper_channel_time;
 	enum mac80211_scan_state next_scan_state;
 	struct delayed_work scan_work;
@@ -1154,6 +1157,12 @@ ieee80211_rx_bss_get(struct ieee80211_local *local, u8 *bssid, int freq,
 void ieee80211_rx_bss_put(struct ieee80211_local *local,
 			  struct ieee80211_bss *bss);
 
+/* scheduled scan handling */
+int ieee80211_request_sched_scan_start(struct ieee80211_sub_if_data *sdata,
+				       struct cfg80211_sched_scan_request *req);
+int ieee80211_request_sched_scan_stop(struct ieee80211_sub_if_data *sdata,
+				      bool driver_initiated);
+
 /* off-channel helpers */
 bool ieee80211_cfg_on_oper_channel(struct ieee80211_local *local);
 void ieee80211_offchannel_enable_all_ps(struct ieee80211_local *local,
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index ab1f464817a..30e6a682a04 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -358,7 +358,8 @@ static void ieee80211_restart_work(struct work_struct *work)
 	flush_workqueue(local->workqueue);
 
 	mutex_lock(&local->mtx);
-	WARN(test_bit(SCAN_HW_SCANNING, &local->scanning),
+	WARN(test_bit(SCAN_HW_SCANNING, &local->scanning) ||
+	     local->sched_scanning,
 		"%s called with hardware scan in progress\n", __func__);
 	mutex_unlock(&local->mtx);
 
@@ -833,6 +834,9 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 	if (!local->ops->remain_on_channel)
 		local->hw.wiphy->max_remain_on_channel_duration = 5000;
 
+	if (local->ops->sched_scan_start)
+		local->hw.wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN;
+
 	result = wiphy_register(local->hw.wiphy);
 	if (result < 0)
 		goto fail_wiphy_register;
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 634f3d97a27..1b9413fb383 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -404,11 +404,13 @@ ieee80211_rx_h_passive_scan(struct ieee80211_rx_data *rx)
 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb);
 	struct sk_buff *skb = rx->skb;
 
-	if (likely(!(status->rx_flags & IEEE80211_RX_IN_SCAN)))
+	if (likely(!(status->rx_flags & IEEE80211_RX_IN_SCAN) &&
+		   !local->sched_scanning))
 		return RX_CONTINUE;
 
 	if (test_bit(SCAN_HW_SCANNING, &local->scanning) ||
-	    test_bit(SCAN_SW_SCANNING, &local->scanning))
+	    test_bit(SCAN_SW_SCANNING, &local->scanning) ||
+	    local->sched_scanning)
 		return ieee80211_scan_rx(rx->sdata, skb);
 
 	/* scanning finished during invoking of handlers */
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 8acce724f0d..ea44a8e941e 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -15,6 +15,7 @@
 #include <linux/if_arp.h>
 #include <linux/rtnetlink.h>
 #include <linux/pm_qos_params.h>
+#include <linux/slab.h>
 #include <net/sch_generic.h>
 #include <linux/slab.h>
 #include <net/mac80211.h>
@@ -850,3 +851,101 @@ void ieee80211_scan_cancel(struct ieee80211_local *local)
 	}
 	mutex_unlock(&local->mtx);
 }
+
+int ieee80211_request_sched_scan_start(struct ieee80211_sub_if_data *sdata,
+				       struct cfg80211_sched_scan_request *req)
+{
+	struct ieee80211_local *local = sdata->local;
+	int ret, i;
+
+	mutex_lock(&sdata->local->mtx);
+
+	if (local->sched_scanning) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	if (!local->ops->sched_scan_start) {
+		ret = -ENOTSUPP;
+		goto out;
+	}
+
+	for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
+		local->sched_scan_ies.ie[i] = kzalloc(2 +
+						      IEEE80211_MAX_SSID_LEN +
+						      local->scan_ies_len,
+						      GFP_KERNEL);
+		if (!local->sched_scan_ies.ie[i]) {
+			ret = -ENOMEM;
+			goto out_free;
+		}
+
+		local->sched_scan_ies.len[i] =
+			ieee80211_build_preq_ies(local,
+						 local->sched_scan_ies.ie[i],
+						 req->ie, req->ie_len, i,
+						 (u32) -1, 0);
+	}
+
+	ret = drv_sched_scan_start(local, sdata, req,
+				   &local->sched_scan_ies);
+	if (ret == 0) {
+		local->sched_scanning = true;
+		goto out;
+	}
+
+out_free:
+	while (i > 0)
+		kfree(local->sched_scan_ies.ie[--i]);
+out:
+	mutex_unlock(&sdata->local->mtx);
+	return ret;
+}
+
+int ieee80211_request_sched_scan_stop(struct ieee80211_sub_if_data *sdata,
+				      bool driver_initiated)
+{
+	struct ieee80211_local *local = sdata->local;
+	int ret = 0, i;
+
+	mutex_lock(&sdata->local->mtx);
+
+	if (!local->ops->sched_scan_stop) {
+		ret = -ENOTSUPP;
+		goto out;
+	}
+
+	if (local->sched_scanning) {
+		for (i = 0; i < IEEE80211_NUM_BANDS; i++)
+			kfree(local->sched_scan_ies.ie[i]);
+
+		if (!driver_initiated)
+			drv_sched_scan_stop(local, sdata);
+		local->sched_scanning = false;
+	}
+
+out:
+	mutex_unlock(&sdata->local->mtx);
+
+	return ret;
+}
+
+void ieee80211_sched_scan_results(struct ieee80211_hw *hw)
+{
+	struct ieee80211_local *local = hw_to_local(hw);
+
+	trace_api_sched_scan_results(local);
+
+	cfg80211_sched_scan_results(hw->wiphy);
+}
+EXPORT_SYMBOL(ieee80211_sched_scan_results);
+
+void ieee80211_sched_scan_stopped(struct ieee80211_hw *hw)
+{
+	struct ieee80211_local *local = hw_to_local(hw);
+
+	trace_api_sched_scan_stopped(local);
+
+	cfg80211_sched_scan_stopped(hw->wiphy);
+}
+EXPORT_SYMBOL(ieee80211_sched_scan_stopped);
-- 
cgit v1.2.3


From bbe6ad6dcb1eb26bd12ec85320f402721c3383ae Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Wed, 11 May 2011 17:09:37 +0300
Subject: cfg80211/nl80211: add interval attribute for scheduled scans

Introduce NL80211_ATTR_SCHED_SCAN_INTERVAL as a required attribute for
NL80211_CMD_START_SCHED_SCAN.  This value informs the driver at which
intervals the scheduled scan cycles should be executed.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/nl80211.h | 25 ++++++++++++++++---------
 include/net/cfg80211.h  |  2 ++
 net/wireless/nl80211.c  | 10 ++++++++++
 3 files changed, 28 insertions(+), 9 deletions(-)

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index f8b5595ba4a..281a2bb6a6e 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -203,15 +203,17 @@
  * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
  *	partial scan results may be available
  *
- * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan.  Like with normal
- *	scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS) are passed, they are used
- *	in the probe requests.  For broadcast, a broadcast SSID must be
- *	passed (ie. an empty string).  If no SSID is passed, no probe
- *	requests are sent and a passive scan is performed.
- *	%NL80211_ATTR_SCAN_FREQUENCIES, if passed, define which channels
- *	should be scanned; if not passed, all channels allowed for the
- *	current regulatory domain are used.  Extra IEs can also be passed
- *	from the userspace by using the %NL80211_ATTR_IE attribute.
+ * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
+ *	intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL.
+ *	Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
+ *	are passed, they are used in the probe requests.  For
+ *	broadcast, a broadcast SSID must be passed (ie. an empty
+ *	string).  If no SSID is passed, no probe requests are sent and
+ *	a passive scan is performed.  %NL80211_ATTR_SCAN_FREQUENCIES,
+ *	if passed, define which channels should be scanned; if not
+ *	passed, all channels allowed for the current regulatory domain
+ *	are used.  Extra IEs can also be passed from the userspace by
+ *	using the %NL80211_ATTR_IE attribute.
  * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan
  * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
  *	results available.
@@ -948,6 +950,9 @@ enum nl80211_commands {
  *	indicate which WoW triggers should be enabled. This is also
  *	used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
  *	triggers.
+
+ * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
+ *	cycles, in msecs.
  *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -1142,6 +1147,8 @@ enum nl80211_attrs {
 	NL80211_ATTR_WOWLAN_TRIGGERS,
 	NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED,
 
+	NL80211_ATTR_SCHED_SCAN_INTERVAL,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index e214c85b74d..1f1e221b6ce 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -829,6 +829,7 @@ struct cfg80211_scan_request {
  * @ssids: SSIDs to scan for (passed in the probe_reqs in active scans)
  * @n_ssids: number of SSIDs
  * @n_channels: total number of channels to scan
+ * @interval: interval between each scheduled scan cycle
  * @ie: optional information element(s) to add into Probe Request or %NULL
  * @ie_len: length of ie in octets
  * @wiphy: the wiphy this was for
@@ -839,6 +840,7 @@ struct cfg80211_sched_scan_request {
 	struct cfg80211_ssid *ssids;
 	int n_ssids;
 	u32 n_channels;
+	u32 interval;
 	const u8 *ie;
 	size_t ie_len;
 
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 4fac370284c..b5b050b62f2 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -175,6 +175,7 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
 	[NL80211_ATTR_KEY_DEFAULT_TYPES] = { .type = NLA_NESTED },
 	[NL80211_ATTR_WOWLAN_TRIGGERS] = { .type = NLA_NESTED },
 	[NL80211_ATTR_STA_PLINK_STATE] = { .type = NLA_U8 },
+	[NL80211_ATTR_SCHED_SCAN_INTERVAL] = { .type = NLA_U32 },
 };
 
 /* policy for the key attributes */
@@ -3370,6 +3371,7 @@ static int nl80211_start_sched_scan(struct sk_buff *skb,
 	struct nlattr *attr;
 	struct wiphy *wiphy;
 	int err, tmp, n_ssids = 0, n_channels, i;
+	u32 interval;
 	enum ieee80211_band band;
 	size_t ie_len;
 
@@ -3383,6 +3385,13 @@ static int nl80211_start_sched_scan(struct sk_buff *skb,
 	if (rdev->sched_scan_req)
 		return -EINPROGRESS;
 
+	if (!info->attrs[NL80211_ATTR_SCHED_SCAN_INTERVAL])
+		return -EINVAL;
+
+	interval = nla_get_u32(info->attrs[NL80211_ATTR_SCHED_SCAN_INTERVAL]);
+	if (interval == 0)
+		return -EINVAL;
+
 	wiphy = &rdev->wiphy;
 
 	if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
@@ -3505,6 +3514,7 @@ static int nl80211_start_sched_scan(struct sk_buff *skb,
 
 	request->dev = dev;
 	request->wiphy = &rdev->wiphy;
+	request->interval = interval;
 
 	err = rdev->ops->sched_scan_start(&rdev->wiphy, dev, request);
 	if (!err) {
-- 
cgit v1.2.3


From 83bc71b4102d2a288edaf9ee398b330b88a88086 Mon Sep 17 00:00:00 2001
From: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Date: Fri, 6 May 2011 18:41:43 -0300
Subject: Bluetooth: Add support for sending connection events for LE links

We need to be able for receive events notifying that the connection
was established, the connection attempt failed or that disconnection
happened.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
---
 net/bluetooth/hci_event.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index d5aa97ee6ff..f13ddbf858b 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1440,7 +1440,7 @@ static inline void hci_disconn_complete_evt(struct hci_dev *hdev, struct sk_buff
 
 	conn->state = BT_CLOSED;
 
-	if (conn->type == ACL_LINK)
+	if (conn->type == ACL_LINK || conn->type == LE_LINK)
 		mgmt_disconnected(hdev->id, &conn->dst);
 
 	hci_proto_disconn_cfm(conn, ev->reason);
@@ -2659,12 +2659,15 @@ static inline void hci_le_conn_complete_evt(struct hci_dev *hdev, struct sk_buff
 	}
 
 	if (ev->status) {
+		mgmt_connect_failed(hdev->id, &ev->bdaddr, ev->status);
 		hci_proto_connect_cfm(conn, ev->status);
 		conn->state = BT_CLOSED;
 		hci_conn_del(conn);
 		goto unlock;
 	}
 
+	mgmt_connected(hdev->id, &ev->bdaddr);
+
 	conn->handle = __le16_to_cpu(ev->handle);
 	conn->state = BT_CONNECTED;
 
-- 
cgit v1.2.3


From 365227e5fdf3d117e096416d9d3cc148959a829e Mon Sep 17 00:00:00 2001
From: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Date: Fri, 6 May 2011 18:41:44 -0300
Subject: Bluetooth: Add support for disconnecting LE links via mgmt

If we can't find a ACL link between the devices, we search
the connection list one second time looking for LE links.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
---
 net/bluetooth/mgmt.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 2481d257ed9..dae382ce702 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -1033,6 +1033,9 @@ static int disconnect(struct sock *sk, u16 index, unsigned char *data, u16 len)
 	}
 
 	conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &cp->bdaddr);
+	if (!conn)
+		conn = hci_conn_hash_lookup_ba(hdev, LE_LINK, &cp->bdaddr);
+
 	if (!conn) {
 		err = cmd_status(sk, index, MGMT_OP_DISCONNECT, ENOTCONN);
 		goto failed;
-- 
cgit v1.2.3


From 55183d06cd1bd939ceccdad628b0aae12c86b803 Mon Sep 17 00:00:00 2001
From: "Gustavo F. Padovan" <padovan@profusion.mobi>
Date: Wed, 11 May 2011 19:26:06 -0300
Subject: Bluetooth: Remove leftover debug messages

They were added by me while testing and I forgot to remove.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
---
 net/bluetooth/l2cap_core.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index d0769a83cb5..a5ab4a29ae3 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -2095,7 +2095,7 @@ static inline int l2cap_connect_req(struct l2cap_conn *conn, struct l2cap_cmd_hd
 	u16 dcid = 0, scid = __le16_to_cpu(req->scid);
 	__le16 psm = req->psm;
 
-	BT_ERR("psm 0x%2.2x scid 0x%4.4x", psm, scid);
+	BT_DBG("psm 0x%2.2x scid 0x%4.4x", psm, scid);
 
 	/* Check if we have socket listening on psm */
 	pchan = l2cap_global_chan_by_psm(BT_LISTEN, psm, conn->src);
@@ -2104,8 +2104,6 @@ static inline int l2cap_connect_req(struct l2cap_conn *conn, struct l2cap_cmd_hd
 		goto sendresp;
 	}
 
-	BT_ERR("%p 0x%2.2x", pchan, pchan->psm);
-
 	parent = pchan->sk;
 
 	bh_lock_sock(parent);
-- 
cgit v1.2.3


From 4daf50f20256e0022c87c1609226e971a70c82fd Mon Sep 17 00:00:00 2001
From: Yogesh Ashok Powar <yogeshp@marvell.com>
Date: Thu, 12 May 2011 09:32:17 -0400
Subject: mac80211: Fix mesh-related build breakage...
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

net/mac80211/cfg.c: In function ‘sta_apply_parameters’:
net/mac80211/cfg.c:746: error: ‘struct sta_info’ has no member named ‘plink_state’
make[1]: *** [net/mac80211/cfg.o] Error 1
make: *** [net/mac80211/mac80211.ko] Error 2

Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/cfg.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index a2ff47493e0..ed3400cd7a5 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -738,6 +738,7 @@ static void sta_apply_parameters(struct ieee80211_local *local,
 						  &sta->sta.ht_cap);
 
 	if (ieee80211_vif_is_mesh(&sdata->vif)) {
+#ifdef CONFIG_MAC80211_MESH
 		if (sdata->u.mesh.security & IEEE80211_MESH_SEC_SECURED)
 			switch (params->plink_state) {
 			case PLINK_LISTEN:
@@ -758,6 +759,7 @@ static void sta_apply_parameters(struct ieee80211_local *local,
 				mesh_plink_block(sta);
 				break;
 			}
+#endif
 	}
 }
 
-- 
cgit v1.2.3


From 56d1893d94bc06d0b1aa3a53f924ed02f9e207bf Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Mon, 9 May 2011 18:41:15 +0200
Subject: cfg80211: restrict AP beacon intervals

Multiple virtual AP interfaces can currently try
to use different beacon intervals, but that just
leads to problems since it won't actually be done
that way by drivers. Return an error in this case
to make sure it won't be done wrong.

Also, ignore attempts to change the DTIM period
or beacon interval during the lifetime of the BSS.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/net/cfg80211.h |  4 ++++
 net/wireless/core.c    |  1 +
 net/wireless/core.h    |  3 +++
 net/wireless/nl80211.c | 40 +++++++++++++++++++++++-----------------
 net/wireless/util.c    | 25 +++++++++++++++++++++++++
 5 files changed, 56 insertions(+), 17 deletions(-)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 1f1e221b6ce..a46adb7a91b 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1908,6 +1908,8 @@ struct cfg80211_cached_keys;
  * @mgmt_registrations_lock: lock for the list
  * @mtx: mutex used to lock data in this struct
  * @cleanup_work: work struct used for cleanup that can't be done directly
+ * @beacon_interval: beacon interval used on this device for transmitting
+ *	beacons, 0 when not valid
  */
 struct wireless_dev {
 	struct wiphy *wiphy;
@@ -1948,6 +1950,8 @@ struct wireless_dev {
 	bool ps;
 	int ps_timeout;
 
+	int beacon_interval;
+
 #ifdef CONFIG_CFG80211_WEXT
 	/* wext data */
 	struct {
diff --git a/net/wireless/core.c b/net/wireless/core.c
index f924a49b242..e2ab65d7c86 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -787,6 +787,7 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
 		default:
 			break;
 		}
+		wdev->beacon_interval = 0;
 		break;
 	case NETDEV_DOWN:
 		dev_hold(dev);
diff --git a/net/wireless/core.h b/net/wireless/core.h
index e3f7b1d995c..fd9135f9b5b 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -433,6 +433,9 @@ int cfg80211_set_freq(struct cfg80211_registered_device *rdev,
 
 u16 cfg80211_calculate_bitrate(struct rate_info *rate);
 
+int cfg80211_validate_beacon_int(struct cfg80211_registered_device *rdev,
+				 u32 beacon_int);
+
 #ifdef CONFIG_CFG80211_DEVELOPER_WARNINGS
 #define CFG80211_DEV_WARN_ON(cond)	WARN_ON(cond)
 #else
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index b5b050b62f2..9ef8e287d61 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1876,8 +1876,9 @@ static int nl80211_addset_beacon(struct sk_buff *skb, struct genl_info *info)
 		    struct beacon_parameters *info);
 	struct cfg80211_registered_device *rdev = info->user_ptr[0];
 	struct net_device *dev = info->user_ptr[1];
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
 	struct beacon_parameters params;
-	int haveinfo = 0;
+	int haveinfo = 0, err;
 
 	if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_BEACON_TAIL]))
 		return -EINVAL;
@@ -1886,6 +1887,8 @@ static int nl80211_addset_beacon(struct sk_buff *skb, struct genl_info *info)
 	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
 		return -EOPNOTSUPP;
 
+	memset(&params, 0, sizeof(params));
+
 	switch (info->genlhdr->cmd) {
 	case NL80211_CMD_NEW_BEACON:
 		/* these are required for NEW_BEACON */
@@ -1894,6 +1897,15 @@ static int nl80211_addset_beacon(struct sk_buff *skb, struct genl_info *info)
 		    !info->attrs[NL80211_ATTR_BEACON_HEAD])
 			return -EINVAL;
 
+		params.interval =
+			nla_get_u32(info->attrs[NL80211_ATTR_BEACON_INTERVAL]);
+		params.dtim_period =
+			nla_get_u32(info->attrs[NL80211_ATTR_DTIM_PERIOD]);
+
+		err = cfg80211_validate_beacon_int(rdev, params.interval);
+		if (err)
+			return err;
+
 		call = rdev->ops->add_beacon;
 		break;
 	case NL80211_CMD_SET_BEACON:
@@ -1907,20 +1919,6 @@ static int nl80211_addset_beacon(struct sk_buff *skb, struct genl_info *info)
 	if (!call)
 		return -EOPNOTSUPP;
 
-	memset(&params, 0, sizeof(params));
-
-	if (info->attrs[NL80211_ATTR_BEACON_INTERVAL]) {
-		params.interval =
-		    nla_get_u32(info->attrs[NL80211_ATTR_BEACON_INTERVAL]);
-		haveinfo = 1;
-	}
-
-	if (info->attrs[NL80211_ATTR_DTIM_PERIOD]) {
-		params.dtim_period =
-		    nla_get_u32(info->attrs[NL80211_ATTR_DTIM_PERIOD]);
-		haveinfo = 1;
-	}
-
 	if (info->attrs[NL80211_ATTR_BEACON_HEAD]) {
 		params.head = nla_data(info->attrs[NL80211_ATTR_BEACON_HEAD]);
 		params.head_len =
@@ -1938,13 +1936,18 @@ static int nl80211_addset_beacon(struct sk_buff *skb, struct genl_info *info)
 	if (!haveinfo)
 		return -EINVAL;
 
-	return call(&rdev->wiphy, dev, &params);
+	err = call(&rdev->wiphy, dev, &params);
+	if (!err && params.interval)
+		wdev->beacon_interval = params.interval;
+	return err;
 }
 
 static int nl80211_del_beacon(struct sk_buff *skb, struct genl_info *info)
 {
 	struct cfg80211_registered_device *rdev = info->user_ptr[0];
 	struct net_device *dev = info->user_ptr[1];
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	int err;
 
 	if (!rdev->ops->del_beacon)
 		return -EOPNOTSUPP;
@@ -1953,7 +1956,10 @@ static int nl80211_del_beacon(struct sk_buff *skb, struct genl_info *info)
 	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
 		return -EOPNOTSUPP;
 
-	return rdev->ops->del_beacon(&rdev->wiphy, dev);
+	err = rdev->ops->del_beacon(&rdev->wiphy, dev);
+	if (!err)
+		wdev->beacon_interval = 0;
+	return err;
 }
 
 static const struct nla_policy sta_flags_policy[NL80211_STA_FLAG_MAX + 1] = {
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 6a750bc6bcf..414c9f604df 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -896,3 +896,28 @@ u16 cfg80211_calculate_bitrate(struct rate_info *rate)
 	/* do NOT round down here */
 	return (bitrate + 50000) / 100000;
 }
+
+int cfg80211_validate_beacon_int(struct cfg80211_registered_device *rdev,
+				 u32 beacon_int)
+{
+	struct wireless_dev *wdev;
+	int res = 0;
+
+	if (!beacon_int)
+		return -EINVAL;
+
+	mutex_lock(&rdev->devlist_mtx);
+
+	list_for_each_entry(wdev, &rdev->netdev_list, list) {
+		if (!wdev->beacon_interval)
+			continue;
+		if (wdev->beacon_interval != beacon_int) {
+			res = -EINVAL;
+			break;
+		}
+	}
+
+	mutex_unlock(&rdev->devlist_mtx);
+
+	return res;
+}
-- 
cgit v1.2.3


From 8fddddff0ad4ccc2787464207eba9ed3063e69cd Mon Sep 17 00:00:00 2001
From: Daniel Halperin <dhalperi@cs.washington.edu>
Date: Tue, 10 May 2011 19:00:45 -0700
Subject: mac80211: fix contention time computation in minstrel, minstrel_ht

When transmitting a frame, the transmitter waits a random number of
slots between 0 and cw. Thus, the contention time is (cw / 2) * t_slot
which we can represent instead as (cw * t_slot) >> 1. Also fix a few
other accounting bugs around contention time, and add comments.

Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/rc80211_minstrel.c    |  4 ++--
 net/mac80211/rc80211_minstrel_ht.c | 27 +++++++++++++++++++++------
 2 files changed, 23 insertions(+), 8 deletions(-)

diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c
index 778c604d793..8adac67395f 100644
--- a/net/mac80211/rc80211_minstrel.c
+++ b/net/mac80211/rc80211_minstrel.c
@@ -417,8 +417,8 @@ minstrel_rate_init(void *priv, struct ieee80211_supported_band *sband,
 			tx_time_single = mr->ack_time + mr->perfect_tx_time;
 
 			/* contention window */
-			tx_time_single += t_slot + min(cw, mp->cw_max);
-			cw = (cw << 1) | 1;
+			tx_time_single += (t_slot * cw) >> 1;
+			cw = min((cw << 1) | 1, mp->cw_max);
 
 			tx_time += tx_time_single;
 			tx_time_cts += tx_time_single + mi->sp_ack_dur;
diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c
index dbdebeda097..3d09c58938e 100644
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -464,6 +464,7 @@ minstrel_calc_retransmit(struct minstrel_priv *mp, struct minstrel_ht_sta *mi,
 	const struct mcs_group *group;
 	unsigned int tx_time, tx_time_rtscts, tx_time_data;
 	unsigned int cw = mp->cw_min;
+	unsigned int ctime = 0;
 	unsigned int t_slot = 9; /* FIXME */
 	unsigned int ampdu_len = MINSTREL_TRUNC(mi->avg_ampdu_len);
 
@@ -480,13 +481,27 @@ minstrel_calc_retransmit(struct minstrel_priv *mp, struct minstrel_ht_sta *mi,
 
 	group = &minstrel_mcs_groups[index / MCS_GROUP_RATES];
 	tx_time_data = group->duration[index % MCS_GROUP_RATES] * ampdu_len;
-	tx_time = 2 * (t_slot + mi->overhead + tx_time_data);
-	tx_time_rtscts = 2 * (t_slot + mi->overhead_rtscts + tx_time_data);
+
+	/* Contention time for first 2 tries */
+	ctime = (t_slot * cw) >> 1;
+	cw = min((cw << 1) | 1, mp->cw_max);
+	ctime += (t_slot * cw) >> 1;
+	cw = min((cw << 1) | 1, mp->cw_max);
+
+	/* Total TX time for data and Contention after first 2 tries */
+	tx_time = ctime + 2 * (mi->overhead + tx_time_data);
+	tx_time_rtscts = ctime + 2 * (mi->overhead_rtscts + tx_time_data);
+
+	/* See how many more tries we can fit inside segment size */
 	do {
-		cw = (cw << 1) | 1;
-		cw = min(cw, mp->cw_max);
-		tx_time += cw + t_slot + mi->overhead;
-		tx_time_rtscts += cw + t_slot + mi->overhead_rtscts;
+		/* Contention time for this try */
+		ctime = (t_slot * cw) >> 1;
+		cw = min((cw << 1) | 1, mp->cw_max);
+
+		/* Total TX time after this try */
+		tx_time += ctime + mi->overhead + tx_time_data;
+		tx_time_rtscts += ctime + mi->overhead_rtscts + tx_time_data;
+
 		if (tx_time_rtscts < mp->segment_size)
 			mr->retry_count_rtscts++;
 	} while ((tx_time < mp->segment_size) &&
-- 
cgit v1.2.3


From 9ba7f4f5eba5f4b44c7796bbad29f8ec3a7d5864 Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Date: Wed, 11 May 2011 14:57:26 -0700
Subject: ath9k_hw: fix dual band assumption for XB113

The XB113 cards are single band, 5 GHz-only, but the
default settings were configured to assume it was dual
band. Users of these cards then would see 2.4 GHz channels
but you would never get any scan results from these channels
given that the radio is not present.

Cc: stable@kernel.org
Cc: Fiona Cain <Fiona.Cain@atheros.com>
Cc: Ray Li <ray.li@greenwavereality.com>
Cc: Kathy Giori <kathy.giori@atheros.com>
Cc: Aeolus Yang <aeolus.yang@atheros.com>
Cc: Dan Friedman <dan.friedman@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 070dc8b882b..0647cc518d9 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -652,7 +652,7 @@ static const struct ar9300_eeprom ar9300_x113 = {
 		.regDmn = { LE16(0), LE16(0x1f) },
 		.txrxMask =  0x77, /* 4 bits tx and 4 bits rx */
 		.opCapFlags = {
-			.opFlags = AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A,
+			.opFlags = AR5416_OPFLAGS_11A,
 			.eepMisc = 0,
 		},
 		.rfSilent = 0,
-- 
cgit v1.2.3


From f1a9c1e694f84938e6526590d23e88a791a8069f Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Thu, 12 May 2011 00:01:47 +0200
Subject: bcma: pci: trivial: correct amount of maximum retries
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/bcma/driver_pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
index b98b8359bef..e757e4e3c7e 100644
--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -81,7 +81,7 @@ static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address)
 	pcicore_write32(pc, mdio_data, v);
 	/* Wait for the device to complete the transaction */
 	udelay(10);
-	for (i = 0; i < 200; i++) {
+	for (i = 0; i < max_retries; i++) {
 		v = pcicore_read32(pc, mdio_control);
 		if (v & 0x100 /* Trans complete */) {
 			udelay(10);
-- 
cgit v1.2.3


From 406a39ec00992090cda034625e176504eb7a71f9 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Wed, 11 May 2011 19:47:11 -0700
Subject: mwifiex: remove mwifiex_recv_complete function

The function
- increments dropped rx_packet count if status code
  passed to it is "-1".
- frees SKB buffer.

But currently the function is being called with "0" status code.
This patch replaces above function by dev_kfree_skb_any() call.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cmdevt.c |  6 +++---
 drivers/net/wireless/mwifiex/main.h   |  4 ----
 drivers/net/wireless/mwifiex/util.c   | 25 -------------------------
 3 files changed, 3 insertions(+), 32 deletions(-)

diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index 5c7539932c2..cd89fed206a 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -91,7 +91,7 @@ mwifiex_clean_cmd_node(struct mwifiex_adapter *adapter,
 	cmd_node->wait_q_enabled = false;
 
 	if (cmd_node->resp_skb) {
-		mwifiex_recv_complete(adapter, cmd_node->resp_skb, 0);
+		dev_kfree_skb_any(cmd_node->resp_skb);
 		cmd_node->resp_skb = NULL;
 	}
 }
@@ -339,7 +339,7 @@ int mwifiex_free_cmd_buffer(struct mwifiex_adapter *adapter)
 		}
 		if (!cmd_array[i].resp_skb)
 			continue;
-		mwifiex_recv_complete(adapter, cmd_array[i].resp_skb, 0);
+		dev_kfree_skb_any(cmd_array[i].resp_skb);
 	}
 	/* Release struct cmd_ctrl_node */
 	if (adapter->cmd_pool) {
@@ -402,7 +402,7 @@ int mwifiex_process_event(struct mwifiex_adapter *adapter)
 	adapter->event_cause = 0;
 	adapter->event_skb = NULL;
 
-	mwifiex_recv_complete(adapter, skb, 0);
+	dev_kfree_skb_any(skb);
 
 	return ret;
 }
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index b4bb5ec4723..672701dc272 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -692,10 +692,6 @@ int mwifiex_shutdown_fw_complete(struct mwifiex_adapter *adapter);
 
 int mwifiex_dnld_fw(struct mwifiex_adapter *, struct mwifiex_fw_image *);
 
-int mwifiex_recv_complete(struct mwifiex_adapter *,
-			  struct sk_buff *skb,
-			  int status);
-
 int mwifiex_recv_packet(struct mwifiex_adapter *, struct sk_buff *skb);
 
 int mwifiex_process_event(struct mwifiex_adapter *adapter);
diff --git a/drivers/net/wireless/mwifiex/util.c b/drivers/net/wireless/mwifiex/util.c
index a8d53aa7e38..d41291529bc 100644
--- a/drivers/net/wireless/mwifiex/util.c
+++ b/drivers/net/wireless/mwifiex/util.c
@@ -176,31 +176,6 @@ int mwifiex_recv_packet(struct mwifiex_adapter *adapter, struct sk_buff *skb)
 	return 0;
 }
 
-/*
- * Receive packet completion callback handler.
- *
- * This function updates the statistics and frees the buffer SKB.
- */
-int mwifiex_recv_complete(struct mwifiex_adapter *adapter,
-			  struct sk_buff *skb, int status)
-{
-	struct mwifiex_private *priv;
-	struct mwifiex_rxinfo *rx_info;
-
-	if (!skb)
-		return 0;
-
-	rx_info = MWIFIEX_SKB_RXCB(skb);
-	priv = mwifiex_bss_index_to_priv(adapter, rx_info->bss_index);
-
-	if (priv && (status == -1))
-		priv->stats.rx_dropped++;
-
-	dev_kfree_skb_any(skb);
-
-	return 0;
-}
-
 /*
  * IOCTL completion callback handler.
  *
-- 
cgit v1.2.3


From be0e6aa5a0c487a2a0880dda8bc70f7f1860fc39 Mon Sep 17 00:00:00 2001
From: Senthil Balasubramanian <senthilkumar@atheros.com>
Date: Thu, 12 May 2011 16:24:28 +0530
Subject: ath9k_hw: Fix STA connection issues with AR9380 (XB113).

XB113 (AR9380) 3x3 SB 5G only cards were failing to connect to APs
due to incorrect xpabiaslevel configuration. fix it.

Cc: stable@kernel.org
Cc: Ray Li <ray.li@greenwavereality.com>
Cc: Kathy Giori <kathy.giori@atheros.com>
Cc: Aeolus Yang <aeolus.yang@atheros.com>
Cc: compat@orbit-lab.org
Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 0647cc518d9..6dfb69ae5b0 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -922,7 +922,7 @@ static const struct ar9300_eeprom ar9300_x113 = {
 		.db_stage2 = {3, 3, 3}, /* 3 chain */
 		.db_stage3 = {3, 3, 3}, /* doesn't exist for 2G */
 		.db_stage4 = {3, 3, 3},	 /* don't exist for 2G */
-		.xpaBiasLvl = 0,
+		.xpaBiasLvl = 0xf,
 		.txFrameToDataStart = 0x0e,
 		.txFrameToPaOn = 0x0e,
 		.txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */
-- 
cgit v1.2.3


From dea4096bc41a9642039840ced91e585d04883a16 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Thu, 12 May 2011 15:03:32 +0200
Subject: mac80211: remove pointless mesh path timer RCU code

The code here to RCU-dereference a pointer that's
on the stack is totally pointless, RCU isn't magic
(like say Java's weak references are), so the code
can't work like whoever wrote it thought it might.

Remove it so readers don't get confused. Note that
it seems that a bug is there anyway: I don't see
any code that cancels the timer when a mesh path
struct is destroyed.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/mesh_hwmp.c | 17 +++--------------
 1 file changed, 3 insertions(+), 14 deletions(-)

diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 849fecd0820..2aec7c4f357 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -966,20 +966,11 @@ endlookup:
 
 void mesh_path_timer(unsigned long data)
 {
-	struct ieee80211_sub_if_data *sdata;
-	struct mesh_path *mpath;
-
-	rcu_read_lock();
-	mpath = (struct mesh_path *) data;
-	mpath = rcu_dereference(mpath);
-	if (!mpath)
-		goto endmpathtimer;
-	sdata = mpath->sdata;
+	struct mesh_path *mpath = (void *) data;
+	struct ieee80211_sub_if_data *sdata = mpath->sdata;
 
-	if (sdata->local->quiescing) {
-		rcu_read_unlock();
+	if (sdata->local->quiescing)
 		return;
-	}
 
 	spin_lock_bh(&mpath->state_lock);
 	if (mpath->flags & MESH_PATH_RESOLVED ||
@@ -996,8 +987,6 @@ void mesh_path_timer(unsigned long data)
 	}
 
 	spin_unlock_bh(&mpath->state_lock);
-endmpathtimer:
-	rcu_read_unlock();
 }
 
 void
-- 
cgit v1.2.3


From 5c0c36412b2dc6b1e243c7e9115306fe286583b7 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Thu, 12 May 2011 14:31:49 +0200
Subject: mac80211: make key locking clearer

The code in ieee80211_del_key() doesn't acquire the
key_mtx properly when it dereferences the keys. It
turns out that isn't actually necessary since the
key_mtx itself seems to be redundant since all key
manipulations are done under the RTNL, but as long
as we have the key_mtx we should use it the right
way too.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/cfg.c | 38 +++++++++++++++-----------------------
 net/mac80211/key.c |  8 ++++----
 net/mac80211/key.h |  1 +
 3 files changed, 20 insertions(+), 27 deletions(-)

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index ed3400cd7a5..94690366321 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -160,13 +160,14 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
 static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev,
 			     u8 key_idx, bool pairwise, const u8 *mac_addr)
 {
-	struct ieee80211_sub_if_data *sdata;
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = sdata->local;
 	struct sta_info *sta;
+	struct ieee80211_key *key = NULL;
 	int ret;
 
-	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
-	mutex_lock(&sdata->local->sta_mtx);
+	mutex_lock(&local->sta_mtx);
+	mutex_lock(&local->key_mtx);
 
 	if (mac_addr) {
 		ret = -ENOENT;
@@ -175,33 +176,24 @@ static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev,
 		if (!sta)
 			goto out_unlock;
 
-		if (pairwise) {
-			if (sta->ptk) {
-				ieee80211_key_free(sdata->local, sta->ptk);
-				ret = 0;
-			}
-		} else {
-			if (sta->gtk[key_idx]) {
-				ieee80211_key_free(sdata->local,
-						   sta->gtk[key_idx]);
-				ret = 0;
-			}
-		}
-
-		goto out_unlock;
-	}
+		if (pairwise)
+			key = sta->ptk;
+		else
+			key = sta->gtk[key_idx];
+	} else
+		key = sdata->keys[key_idx];
 
-	if (!sdata->keys[key_idx]) {
+	if (!key) {
 		ret = -ENOENT;
 		goto out_unlock;
 	}
 
-	ieee80211_key_free(sdata->local, sdata->keys[key_idx]);
-	WARN_ON(sdata->keys[key_idx]);
+	__ieee80211_key_free(key);
 
 	ret = 0;
  out_unlock:
-	mutex_unlock(&sdata->local->sta_mtx);
+	mutex_unlock(&local->key_mtx);
+	mutex_unlock(&local->sta_mtx);
 
 	return ret;
 }
diff --git a/net/mac80211/key.c b/net/mac80211/key.c
index b510721e3b3..958832dd4f0 100644
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -471,8 +471,11 @@ int ieee80211_key_link(struct ieee80211_key *key,
 	return ret;
 }
 
-static void __ieee80211_key_free(struct ieee80211_key *key)
+void __ieee80211_key_free(struct ieee80211_key *key)
 {
+	if (!key)
+		return;
+
 	/*
 	 * Replace key with nothingness if it was ever used.
 	 */
@@ -486,9 +489,6 @@ static void __ieee80211_key_free(struct ieee80211_key *key)
 void ieee80211_key_free(struct ieee80211_local *local,
 			struct ieee80211_key *key)
 {
-	if (!key)
-		return;
-
 	mutex_lock(&local->key_mtx);
 	__ieee80211_key_free(key);
 	mutex_unlock(&local->key_mtx);
diff --git a/net/mac80211/key.h b/net/mac80211/key.h
index 4ddbe27eb57..e5432ef8b20 100644
--- a/net/mac80211/key.h
+++ b/net/mac80211/key.h
@@ -135,6 +135,7 @@ struct ieee80211_key *ieee80211_key_alloc(u32 cipher, int idx, size_t key_len,
 int __must_check ieee80211_key_link(struct ieee80211_key *key,
 				    struct ieee80211_sub_if_data *sdata,
 				    struct sta_info *sta);
+void __ieee80211_key_free(struct ieee80211_key *key);
 void ieee80211_key_free(struct ieee80211_local *local,
 			struct ieee80211_key *key);
 void ieee80211_set_default_key(struct ieee80211_sub_if_data *sdata, int idx,
-- 
cgit v1.2.3


From 8cb231530f03961b55aa4e84e6ead5590bcde04d Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Thu, 12 May 2011 15:07:15 +0200
Subject: mac80211: fix another key non-race

The code here is only not racy because all the
places that assign the pointers it uses are
holding the sta_mtx as well as the key_mtx and
so can't race against this because this code
holds the sta_mtx. But that's not intuitive,
so fix it to hold the key_mtx.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/sta_info.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index f05244dc773..cba8309e9ac 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -652,10 +652,12 @@ static int __must_check __sta_info_destroy(struct sta_info *sta)
 	if (ret)
 		return ret;
 
+	mutex_lock(&local->key_mtx);
 	for (i = 0; i < NUM_DEFAULT_KEYS; i++)
-		ieee80211_key_free(local, sta->gtk[i]);
+		__ieee80211_key_free(sta->gtk[i]);
 	if (sta->ptk)
-		ieee80211_key_free(local, sta->ptk);
+		__ieee80211_key_free(sta->ptk);
+	mutex_unlock(&local->key_mtx);
 
 	sta->dead = true;
 
-- 
cgit v1.2.3


From a3836e02ba4c50db958d32d710b226f2408623dc Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Thu, 12 May 2011 15:11:37 +0200
Subject: mac80211: fix a few RCU issues

A few configuration functions correctly do
rcu_read_lock() but don't correctly reference
some pointers protected by RCU. Fix that.

Cc: stable@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/cfg.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 94690366321..303f33fcb84 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -223,11 +223,11 @@ static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev,
 			goto out;
 
 		if (pairwise)
-			key = sta->ptk;
+			key = rcu_dereference(sta->ptk);
 		else if (key_idx < NUM_DEFAULT_KEYS)
-			key = sta->gtk[key_idx];
+			key = rcu_dereference(sta->gtk[key_idx]);
 	} else
-		key = sdata->keys[key_idx];
+		key = rcu_dereference(sdata->keys[key_idx]);
 
 	if (!key)
 		goto out;
@@ -952,8 +952,10 @@ static int ieee80211_change_mpath(struct wiphy *wiphy,
 static void mpath_set_pinfo(struct mesh_path *mpath, u8 *next_hop,
 			    struct mpath_info *pinfo)
 {
-	if (mpath->next_hop)
-		memcpy(next_hop, mpath->next_hop->sta.addr, ETH_ALEN);
+	struct sta_info *next_hop_sta = rcu_dereference(mpath->next_hop);
+
+	if (next_hop_sta)
+		memcpy(next_hop, next_hop_sta->sta.addr, ETH_ALEN);
 	else
 		memset(next_hop, 0, ETH_ALEN);
 
-- 
cgit v1.2.3


From 85a9994a0a6cba1a6cc6af4bd3ebd85f778be0fe Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Thu, 12 May 2011 16:28:29 +0300
Subject: cfg80211/mac80211: avoid bounce back mac->cfg->mac on
 sched_scan_stopped

When sched_scan_stopped was called by the driver, mac80211 calls
cfg80211, which in turn was calling mac80211 back with a flag
"driver_initiated".  This flag was used so that mac80211 would do the
necessary cleanup but would not call the driver.  This was enough to
prevent the bounce back between the driver and mac80211, but not
between mac80211 and cfg80211.

To fix this, we now do the cleanup in mac80211 before calling
cfg80211.  To help with locking issues, the workqueue was moved from
cfg80211 to mac80211.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/net/cfg80211.h     |  3 +--
 net/mac80211/cfg.c         |  5 ++---
 net/mac80211/ieee80211_i.h |  5 +++--
 net/mac80211/main.c        |  3 +++
 net/mac80211/scan.c        | 33 +++++++++++++++++++++++++++------
 net/wireless/core.c        |  1 -
 net/wireless/core.h        |  2 --
 net/wireless/scan.c        | 21 +++++++--------------
 8 files changed, 43 insertions(+), 30 deletions(-)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index a46adb7a91b..e1f1b41f7b1 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1515,8 +1515,7 @@ struct cfg80211_ops {
 	int	(*sched_scan_start)(struct wiphy *wiphy,
 				struct net_device *dev,
 				struct cfg80211_sched_scan_request *request);
-	int	(*sched_scan_stop)(struct wiphy *wiphy, struct net_device *dev,
-				   bool driver_initiated);
+	int	(*sched_scan_stop)(struct wiphy *wiphy, struct net_device *dev);
 };
 
 /*
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 303f33fcb84..2d1c1a5f3c5 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1372,15 +1372,14 @@ ieee80211_sched_scan_start(struct wiphy *wiphy,
 }
 
 static int
-ieee80211_sched_scan_stop(struct wiphy *wiphy, struct net_device *dev,
-			  bool driver_initiated)
+ieee80211_sched_scan_stop(struct wiphy *wiphy, struct net_device *dev)
 {
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
 	if (!sdata->local->ops->sched_scan_stop)
 		return -EOPNOTSUPP;
 
-	return ieee80211_request_sched_scan_stop(sdata, driver_initiated);
+	return ieee80211_request_sched_scan_stop(sdata);
 }
 
 static int ieee80211_auth(struct wiphy *wiphy, struct net_device *dev,
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 6f55a789c09..82f90ff8bb1 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -849,6 +849,7 @@ struct ieee80211_local {
 
 	bool sched_scanning;
 	struct ieee80211_sched_scan_ies sched_scan_ies;
+	struct work_struct sched_scan_stopped_work;
 
 	unsigned long leave_oper_channel_time;
 	enum mac80211_scan_state next_scan_state;
@@ -1160,8 +1161,8 @@ void ieee80211_rx_bss_put(struct ieee80211_local *local,
 /* scheduled scan handling */
 int ieee80211_request_sched_scan_start(struct ieee80211_sub_if_data *sdata,
 				       struct cfg80211_sched_scan_request *req);
-int ieee80211_request_sched_scan_stop(struct ieee80211_sub_if_data *sdata,
-				      bool driver_initiated);
+int ieee80211_request_sched_scan_stop(struct ieee80211_sub_if_data *sdata);
+void ieee80211_sched_scan_stopped_work(struct work_struct *work);
 
 /* off-channel helpers */
 bool ieee80211_cfg_on_oper_channel(struct ieee80211_local *local);
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 30e6a682a04..7f89011fa22 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -652,6 +652,9 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 	setup_timer(&local->dynamic_ps_timer,
 		    ieee80211_dynamic_ps_timer, (unsigned long) local);
 
+	INIT_WORK(&local->sched_scan_stopped_work,
+		  ieee80211_sched_scan_stopped_work);
+
 	sta_info_init(local);
 
 	for (i = 0; i < IEEE80211_MAX_QUEUES; i++) {
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index ea44a8e941e..d20046b5d8f 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -902,8 +902,7 @@ out:
 	return ret;
 }
 
-int ieee80211_request_sched_scan_stop(struct ieee80211_sub_if_data *sdata,
-				      bool driver_initiated)
+int ieee80211_request_sched_scan_stop(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_local *local = sdata->local;
 	int ret = 0, i;
@@ -919,11 +918,9 @@ int ieee80211_request_sched_scan_stop(struct ieee80211_sub_if_data *sdata,
 		for (i = 0; i < IEEE80211_NUM_BANDS; i++)
 			kfree(local->sched_scan_ies.ie[i]);
 
-		if (!driver_initiated)
-			drv_sched_scan_stop(local, sdata);
+		drv_sched_scan_stop(local, sdata);
 		local->sched_scanning = false;
 	}
-
 out:
 	mutex_unlock(&sdata->local->mtx);
 
@@ -940,12 +937,36 @@ void ieee80211_sched_scan_results(struct ieee80211_hw *hw)
 }
 EXPORT_SYMBOL(ieee80211_sched_scan_results);
 
+void ieee80211_sched_scan_stopped_work(struct work_struct *work)
+{
+	struct ieee80211_local *local =
+		container_of(work, struct ieee80211_local,
+			     sched_scan_stopped_work);
+	int i;
+
+	mutex_lock(&local->mtx);
+
+	if (!local->sched_scanning) {
+		mutex_unlock(&local->mtx);
+		return;
+	}
+
+	for (i = 0; i < IEEE80211_NUM_BANDS; i++)
+		kfree(local->sched_scan_ies.ie[i]);
+
+	local->sched_scanning = false;
+
+	mutex_unlock(&local->mtx);
+
+	cfg80211_sched_scan_stopped(local->hw.wiphy);
+}
+
 void ieee80211_sched_scan_stopped(struct ieee80211_hw *hw)
 {
 	struct ieee80211_local *local = hw_to_local(hw);
 
 	trace_api_sched_scan_stopped(local);
 
-	cfg80211_sched_scan_stopped(hw->wiphy);
+	ieee80211_queue_work(&local->hw, &local->sched_scan_stopped_work);
 }
 EXPORT_SYMBOL(ieee80211_sched_scan_stopped);
diff --git a/net/wireless/core.c b/net/wireless/core.c
index e2ab65d7c86..18b002f1686 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -371,7 +371,6 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv)
 	INIT_LIST_HEAD(&rdev->bss_list);
 	INIT_WORK(&rdev->scan_done_wk, __cfg80211_scan_done);
 	INIT_WORK(&rdev->sched_scan_results_wk, __cfg80211_sched_scan_results);
-	INIT_WORK(&rdev->sched_scan_stopped_wk, __cfg80211_sched_scan_stopped);
 #ifdef CONFIG_CFG80211_WEXT
 	rdev->wiphy.wext = &cfg80211_wext_handler;
 #endif
diff --git a/net/wireless/core.h b/net/wireless/core.h
index fd9135f9b5b..d4b8f4c0bbb 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -64,7 +64,6 @@ struct cfg80211_registered_device {
 	unsigned long suspend_at;
 	struct work_struct scan_done_wk;
 	struct work_struct sched_scan_results_wk;
-	struct work_struct sched_scan_stopped_wk;
 
 #ifdef CONFIG_NL80211_TESTMODE
 	struct genl_info *testmode_info;
@@ -417,7 +416,6 @@ void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, bool leak);
 void __cfg80211_sched_scan_results(struct work_struct *wk);
 int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev,
 			       bool driver_initiated);
-void __cfg80211_sched_scan_stopped(struct work_struct *wk);
 void cfg80211_upload_connect_keys(struct wireless_dev *wdev);
 int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
 			  struct net_device *dev, enum nl80211_iftype ntype,
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 65dfae3b9d4..73a441d237b 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -119,22 +119,14 @@ void cfg80211_sched_scan_results(struct wiphy *wiphy)
 }
 EXPORT_SYMBOL(cfg80211_sched_scan_results);
 
-void __cfg80211_sched_scan_stopped(struct work_struct *wk)
+void cfg80211_sched_scan_stopped(struct wiphy *wiphy)
 {
-	struct cfg80211_registered_device *rdev;
-
-	rdev = container_of(wk, struct cfg80211_registered_device,
-			    sched_scan_stopped_wk);
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
 
 	cfg80211_lock_rdev(rdev);
 	__cfg80211_stop_sched_scan(rdev, true);
 	cfg80211_unlock_rdev(rdev);
 }
-
-void cfg80211_sched_scan_stopped(struct wiphy *wiphy)
-{
-	queue_work(cfg80211_wq, &wiphy_to_dev(wiphy)->sched_scan_stopped_wk);
-}
 EXPORT_SYMBOL(cfg80211_sched_scan_stopped);
 
 int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev,
@@ -150,10 +142,11 @@ int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev,
 
 	dev = rdev->sched_scan_req->dev;
 
-	err = rdev->ops->sched_scan_stop(&rdev->wiphy, dev,
-					 driver_initiated);
-	if (err)
-		return err;
+	if (!driver_initiated) {
+		err = rdev->ops->sched_scan_stop(&rdev->wiphy, dev);
+		if (err)
+			return err;
+	}
 
 	nl80211_send_sched_scan(rdev, dev, NL80211_CMD_SCHED_SCAN_STOPPED);
 
-- 
cgit v1.2.3


From 6b86bd62a505a4a9739474f00f8088395b7a80ba Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Thu, 12 May 2011 13:38:50 +0200
Subject: mac80211: mesh: move some code to make it static

There's no need to have table functions in one
file and all users in another, move the functions
to the right file and make them static. Also move
a static variable to the beginning of the file to
make it easier to find.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/mesh.c         | 43 --------------------------------
 net/mac80211/mesh.h         |  4 ---
 net/mac80211/mesh_pathtbl.c | 60 +++++++++++++++++++++++++++++++++++++++------
 3 files changed, 53 insertions(+), 54 deletions(-)

diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 75378e852f0..29e9980c8e6 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -287,49 +287,6 @@ void mesh_mgmt_ies_add(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
 	}
 }
 
-u32 mesh_table_hash(u8 *addr, struct ieee80211_sub_if_data *sdata, struct mesh_table *tbl)
-{
-	/* Use last four bytes of hw addr and interface index as hash index */
-	return jhash_2words(*(u32 *)(addr+2), sdata->dev->ifindex, tbl->hash_rnd)
-		& tbl->hash_mask;
-}
-
-struct mesh_table *mesh_table_alloc(int size_order)
-{
-	int i;
-	struct mesh_table *newtbl;
-
-	newtbl = kmalloc(sizeof(struct mesh_table), GFP_KERNEL);
-	if (!newtbl)
-		return NULL;
-
-	newtbl->hash_buckets = kzalloc(sizeof(struct hlist_head) *
-			(1 << size_order), GFP_KERNEL);
-
-	if (!newtbl->hash_buckets) {
-		kfree(newtbl);
-		return NULL;
-	}
-
-	newtbl->hashwlock = kmalloc(sizeof(spinlock_t) *
-			(1 << size_order), GFP_KERNEL);
-	if (!newtbl->hashwlock) {
-		kfree(newtbl->hash_buckets);
-		kfree(newtbl);
-		return NULL;
-	}
-
-	newtbl->size_order = size_order;
-	newtbl->hash_mask = (1 << size_order) - 1;
-	atomic_set(&newtbl->entries,  0);
-	get_random_bytes(&newtbl->hash_rnd,
-			sizeof(newtbl->hash_rnd));
-	for (i = 0; i <= newtbl->hash_mask; i++)
-		spin_lock_init(&newtbl->hashwlock[i]);
-
-	return newtbl;
-}
-
 
 static void ieee80211_mesh_path_timer(unsigned long data)
 {
diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index 10acf1cc808..5c0c20389a1 100644
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -240,12 +240,8 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata,
 
 /* Private interfaces */
 /* Mesh tables */
-struct mesh_table *mesh_table_alloc(int size_order);
-void mesh_table_free(struct mesh_table *tbl, bool free_leafs);
 void mesh_mpath_table_grow(void);
 void mesh_mpp_table_grow(void);
-u32 mesh_table_hash(u8 *addr, struct ieee80211_sub_if_data *sdata,
-		struct mesh_table *tbl);
 /* Mesh paths */
 int mesh_path_error_tx(u8 ttl, u8 *target, __le32 target_sn, __le16 target_rcode,
 		       const u8 *ra, struct ieee80211_sub_if_data *sdata);
diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index c7cb3cc083d..0aa96cd6bd2 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -40,6 +40,50 @@ static struct mesh_table *mesh_paths;
 static struct mesh_table *mpp_paths; /* Store paths for MPP&MAP */
 
 int mesh_paths_generation;
+
+/* This lock will have the grow table function as writer and add / delete nodes
+ * as readers. When reading the table (i.e. doing lookups) we are well protected
+ * by RCU
+ */
+static DEFINE_RWLOCK(pathtbl_resize_lock);
+
+
+static struct mesh_table *mesh_table_alloc(int size_order)
+{
+	int i;
+	struct mesh_table *newtbl;
+
+	newtbl = kmalloc(sizeof(struct mesh_table), GFP_KERNEL);
+	if (!newtbl)
+		return NULL;
+
+	newtbl->hash_buckets = kzalloc(sizeof(struct hlist_head) *
+			(1 << size_order), GFP_KERNEL);
+
+	if (!newtbl->hash_buckets) {
+		kfree(newtbl);
+		return NULL;
+	}
+
+	newtbl->hashwlock = kmalloc(sizeof(spinlock_t) *
+			(1 << size_order), GFP_KERNEL);
+	if (!newtbl->hashwlock) {
+		kfree(newtbl->hash_buckets);
+		kfree(newtbl);
+		return NULL;
+	}
+
+	newtbl->size_order = size_order;
+	newtbl->hash_mask = (1 << size_order) - 1;
+	atomic_set(&newtbl->entries,  0);
+	get_random_bytes(&newtbl->hash_rnd,
+			sizeof(newtbl->hash_rnd));
+	for (i = 0; i <= newtbl->hash_mask; i++)
+		spin_lock_init(&newtbl->hashwlock[i]);
+
+	return newtbl;
+}
+
 static void __mesh_table_free(struct mesh_table *tbl)
 {
 	kfree(tbl->hash_buckets);
@@ -47,7 +91,7 @@ static void __mesh_table_free(struct mesh_table *tbl)
 	kfree(tbl);
 }
 
-void mesh_table_free(struct mesh_table *tbl, bool free_leafs)
+static void mesh_table_free(struct mesh_table *tbl, bool free_leafs)
 {
 	struct hlist_head *mesh_hash;
 	struct hlist_node *p, *q;
@@ -66,7 +110,7 @@ void mesh_table_free(struct mesh_table *tbl, bool free_leafs)
 }
 
 static int mesh_table_grow(struct mesh_table *oldtbl,
-		struct mesh_table *newtbl)
+			   struct mesh_table *newtbl)
 {
 	struct hlist_head *oldhash;
 	struct hlist_node *p, *q;
@@ -97,12 +141,14 @@ errcopy:
 	return -ENOMEM;
 }
 
+static u32 mesh_table_hash(u8 *addr, struct ieee80211_sub_if_data *sdata,
+			   struct mesh_table *tbl)
+{
+	/* Use last four bytes of hw addr and interface index as hash index */
+	return jhash_2words(*(u32 *)(addr+2), sdata->dev->ifindex, tbl->hash_rnd)
+		& tbl->hash_mask;
+}
 
-/* This lock will have the grow table function as writer and add / delete nodes
- * as readers. When reading the table (i.e. doing lookups) we are well protected
- * by RCU
- */
-static DEFINE_RWLOCK(pathtbl_resize_lock);
 
 /**
  *
-- 
cgit v1.2.3


From 889cb360b4f48c1334311093161f06f7b4bd77d2 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Sun, 1 May 2011 09:56:45 +0300
Subject: wl12xx: simplify wl1271_ssid_set()

Simplify wl1271_ssid_set by re-using cfg80211_find_ie instead of
reimplementing it.

Additionally, add a length check to prevent a potential buffer overflow.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 26 +++++++++++++++-----------
 1 file changed, 15 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 6dab6f0c91b..f82e736ba19 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -2376,20 +2376,24 @@ out:
 static int wl1271_ssid_set(struct wl1271 *wl, struct sk_buff *skb,
 			    int offset)
 {
-	u8 *ptr = skb->data + offset;
+	u8 ssid_len;
+	const u8 *ptr = cfg80211_find_ie(WLAN_EID_SSID, skb->data + offset,
+					 skb->len - offset);
 
-	/* find the location of the ssid in the beacon */
-	while (ptr < skb->data + skb->len) {
-		if (ptr[0] == WLAN_EID_SSID) {
-			wl->ssid_len = ptr[1];
-			memcpy(wl->ssid, ptr+2, wl->ssid_len);
-			return 0;
-		}
-		ptr += (ptr[1] + 2);
+	if (!ptr) {
+		wl1271_error("No SSID in IEs!");
+		return -ENOENT;
 	}
 
-	wl1271_error("No SSID in IEs!\n");
-	return -ENOENT;
+	ssid_len = ptr[1];
+	if (ssid_len > IEEE80211_MAX_SSID_LEN) {
+		wl1271_error("SSID is too long!");
+		return -EINVAL;
+	}
+
+	wl->ssid_len = ssid_len;
+	memcpy(wl->ssid, ptr+2, ssid_len);
+	return 0;
 }
 
 static int wl1271_bss_erp_info_changed(struct wl1271 *wl,
-- 
cgit v1.2.3


From bc76b94051983b94c8ba04fbfbc59651b9925fa7 Mon Sep 17 00:00:00 2001
From: Shahar Levi <shahar_levi@ti.com>
Date: Wed, 11 May 2011 11:14:22 +0300
Subject: wl12xx: Don't filter beacons that include changed HT IEs

This patch adds a beacon filter rule to pass up the beacons that
contain changed HT information elements.  These beacons need to be
passed to mac80211 so that it can act on such changes.

[Reworded commit log -- Luca.]

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index f82e736ba19..fa6b996d7d4 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -257,12 +257,16 @@ static struct conf_drv_settings default_conf = {
 		.wake_up_event               = CONF_WAKE_UP_EVENT_DTIM,
 		.listen_interval             = 1,
 		.bcn_filt_mode               = CONF_BCN_FILT_MODE_ENABLED,
-		.bcn_filt_ie_count           = 1,
+		.bcn_filt_ie_count           = 2,
 		.bcn_filt_ie = {
 			[0] = {
 				.ie          = WLAN_EID_CHANNEL_SWITCH,
 				.rule        = CONF_BCN_RULE_PASS_ON_APPEARANCE,
-			}
+			},
+			[1] = {
+				.ie          = WLAN_EID_HT_INFORMATION,
+				.rule        = CONF_BCN_RULE_PASS_ON_CHANGE,
+			},
 		},
 		.synch_fail_thold            = 10,
 		.bss_lose_timeout            = 100,
-- 
cgit v1.2.3


From fcd23b6305e98f5ad3ddd7ff3f5081c75fcd4367 Mon Sep 17 00:00:00 2001
From: Shahar Levi <shahar_levi@ti.com>
Date: Wed, 11 May 2011 12:12:56 +0300
Subject: wl12xx: add IEEE80211_HW_SPECTRUM_MGMT bit to the hw flags

Set the spectrum management bit in the hw flags so that mac80211 will
set the WLAN_CAPABILITY_SPECTRUM_MGMT bit in association requests
(which in practice means that we support 802.11h spectrum management).

[Reworded the commit log -- Luca.]

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index fa6b996d7d4..acfbbfd3b7d 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -3634,6 +3634,7 @@ int wl1271_init_ieee80211(struct wl1271 *wl)
 		IEEE80211_HW_CONNECTION_MONITOR |
 		IEEE80211_HW_SUPPORTS_CQM_RSSI |
 		IEEE80211_HW_REPORTS_TX_ACK_STATUS |
+		IEEE80211_HW_SPECTRUM_MGMT |
 		IEEE80211_HW_AP_LINK_PS;
 
 	wl->hw->wiphy->cipher_suites = cipher_suites;
-- 
cgit v1.2.3


From 3a9d60e5bd72f9533b05d39278fec50b181dbdd2 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Tue, 10 May 2011 14:06:31 +0300
Subject: wl12xx: add configuration values for scheduled scan

Add the structures and values for driver-configured scheduled scan
parameters.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/conf.h | 21 +++++++++++++++++++++
 drivers/net/wireless/wl12xx/main.c |  9 +++++++++
 2 files changed, 30 insertions(+)

diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index 1f947368f9e..ba558fcc76d 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -1147,6 +1147,26 @@ struct conf_scan_settings {
 
 };
 
+struct conf_sched_scan_settings {
+	/* minimum time to wait on the channel for active scans (in TUs) */
+	u16 min_dwell_time_active;
+
+	/* maximum time to wait on the channel for active scans (in TUs) */
+	u16 max_dwell_time_active;
+
+	/* time to wait on the channel for passive scans (in TUs) */
+	u32 dwell_time_passive;
+
+	/* number of probe requests to send on each channel in active scans */
+	u8 num_probe_reqs;
+
+	/* RSSI threshold to be used for filtering */
+	s8 rssi_threshold;
+
+	/* SNR threshold to be used for filtering */
+	s8 snr_threshold;
+};
+
 /* these are number of channels on the band divided by two, rounded up */
 #define CONF_TX_PWR_COMPENSATION_LEN_2 7
 #define CONF_TX_PWR_COMPENSATION_LEN_5 18
@@ -1234,6 +1254,7 @@ struct conf_drv_settings {
 	struct conf_pm_config_settings pm_config;
 	struct conf_roam_trigger_settings roam_trigger;
 	struct conf_scan_settings scan;
+	struct conf_sched_scan_settings sched_scan;
 	struct conf_rf_settings rf;
 	struct conf_ht_setting ht;
 	struct conf_memory_settings mem_wl127x;
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index acfbbfd3b7d..88d2e9052a0 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -306,6 +306,15 @@ static struct conf_drv_settings default_conf = {
 		.max_dwell_time_passive       = 100000,
 		.num_probe_reqs               = 2,
 	},
+	.sched_scan = {
+		/* sched_scan requires dwell times in TU instead of TU/1000 */
+		.min_dwell_time_active = 8,
+		.max_dwell_time_active = 30,
+		.dwell_time_passive    = 100,
+		.num_probe_reqs        = 2,
+		.rssi_threshold        = -90,
+		.snr_threshold         = 0,
+	},
 	.rf = {
 		.tx_per_channel_power_compensation_2 = {
 			0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-- 
cgit v1.2.3


From 6394c01b61f8ab66a6af1a24ff05f2429130afcd Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Tue, 10 May 2011 14:28:27 +0300
Subject: wl12xx: listen to scheduled scan events

Subscribe and listen to PERIODIC_SCAN_REPORT_EVENT_ID and
PERIODIC_SCAN_COMPLETE_EVENT_ID in preparation for the scheduled scan
implementation.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/boot.c  |  4 +++-
 drivers/net/wireless/wl12xx/event.c | 10 ++++++++++
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c
index 2b0cf85788b..b07f8b7e5f1 100644
--- a/drivers/net/wireless/wl12xx/boot.c
+++ b/drivers/net/wireless/wl12xx/boot.c
@@ -478,7 +478,9 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl)
 		DISCONNECT_EVENT_COMPLETE_ID |
 		RSSI_SNR_TRIGGER_0_EVENT_ID |
 		PSPOLL_DELIVERY_FAILURE_EVENT_ID |
-		SOFT_GEMINI_SENSE_EVENT_ID;
+		SOFT_GEMINI_SENSE_EVENT_ID |
+		PERIODIC_SCAN_REPORT_EVENT_ID |
+		PERIODIC_SCAN_COMPLETE_EVENT_ID;
 
 	if (wl->bss_type == BSS_TYPE_AP_BSS)
 		wl->event_mask |= STA_REMOVE_COMPLETE_EVENT_ID;
diff --git a/drivers/net/wireless/wl12xx/event.c b/drivers/net/wireless/wl12xx/event.c
index ae69330e807..dc110e8a618 100644
--- a/drivers/net/wireless/wl12xx/event.c
+++ b/drivers/net/wireless/wl12xx/event.c
@@ -188,6 +188,16 @@ static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
 		wl1271_scan_stm(wl);
 	}
 
+	if (vector & PERIODIC_SCAN_REPORT_EVENT_ID) {
+		wl1271_debug(DEBUG_EVENT, "PERIODIC_SCAN_REPORT_EVENT "
+			     "(status 0x%0x)", mbox->scheduled_scan_status);
+	}
+
+	if (vector & PERIODIC_SCAN_COMPLETE_EVENT_ID) {
+		wl1271_debug(DEBUG_EVENT, "PERIODIC_SCAN_COMPLETE_EVENT "
+			     "(status 0x%0x)", mbox->scheduled_scan_status);
+	}
+
 	/* disable dynamic PS when requested by the firmware */
 	if (vector & SOFT_GEMINI_SENSE_EVENT_ID &&
 	    wl->bss_type == BSS_TYPE_STA_BSS) {
-- 
cgit v1.2.3


From 95feadca6dca909ae0f6e65665b782c7ca9d5122 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Tue, 10 May 2011 14:38:59 +0300
Subject: wl12xx: add scheduled scan structures and commands

Add firmware command structures, definitions and code to to configure,
start and stop scheduled scans.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/scan.c | 233 +++++++++++++++++++++++++++++++++++++
 drivers/net/wireless/wl12xx/scan.h | 114 ++++++++++++++++++
 2 files changed, 347 insertions(+)

diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c
index 5d0544c8f3f..d78044f0081 100644
--- a/drivers/net/wireless/wl12xx/scan.c
+++ b/drivers/net/wireless/wl12xx/scan.c
@@ -320,3 +320,236 @@ int wl1271_scan(struct wl1271 *wl, const u8 *ssid, size_t ssid_len,
 
 	return 0;
 }
+
+static int
+wl1271_scan_get_sched_scan_channels(struct wl1271 *wl,
+				    struct cfg80211_sched_scan_request *req,
+				    struct conn_scan_ch_params *channels,
+				    u32 band, bool radar, bool passive,
+				    int start)
+{
+	struct conf_sched_scan_settings *c = &wl->conf.sched_scan;
+	int i, j;
+	u32 flags;
+
+	for (i = 0, j = start;
+	     i < req->n_channels && j < MAX_CHANNELS_ALL_BANDS;
+	     i++) {
+		flags = req->channels[i]->flags;
+
+		if (!(flags & IEEE80211_CHAN_DISABLED) &&
+		    ((flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive) &&
+		    ((flags & IEEE80211_CHAN_RADAR) == radar) &&
+		    (req->channels[i]->band == band)) {
+			wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ",
+				     req->channels[i]->band,
+				     req->channels[i]->center_freq);
+			wl1271_debug(DEBUG_SCAN, "hw_value %d, flags %X",
+				     req->channels[i]->hw_value,
+				     req->channels[i]->flags);
+			wl1271_debug(DEBUG_SCAN, "max_power %d",
+				     req->channels[i]->max_power);
+
+			if (flags & IEEE80211_CHAN_PASSIVE_SCAN) {
+				channels[j].passive_duration =
+					cpu_to_le16(c->dwell_time_passive);
+			} else {
+				channels[j].min_duration =
+					cpu_to_le16(c->min_dwell_time_active);
+				channels[j].max_duration =
+					cpu_to_le16(c->max_dwell_time_active);
+			}
+			channels[j].tx_power_att = req->channels[j]->max_power;
+			channels[j].channel = req->channels[i]->hw_value;
+
+			j++;
+		}
+	}
+
+	return j - start;
+}
+
+static int
+wl1271_scan_sched_scan_channels(struct wl1271 *wl,
+				struct cfg80211_sched_scan_request *req,
+				struct wl1271_cmd_sched_scan_config *cfg)
+{
+	int idx = 0;
+
+	cfg->passive[0] =
+		wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
+						    IEEE80211_BAND_2GHZ,
+						    false, true, idx);
+	idx += cfg->passive[0];
+
+	cfg->active[0] =
+		wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
+						    IEEE80211_BAND_2GHZ,
+						    false, false, idx);
+	idx += cfg->active[0];
+
+	cfg->passive[1] =
+		wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
+						    IEEE80211_BAND_5GHZ,
+						    false, true, idx);
+	idx += cfg->passive[1];
+
+	cfg->active[1] =
+		wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
+						    IEEE80211_BAND_5GHZ,
+						    false, false, 14);
+	idx += cfg->active[1];
+
+	cfg->dfs =
+		wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
+						    IEEE80211_BAND_5GHZ,
+						    true, false, idx);
+	idx += cfg->dfs;
+
+	wl1271_debug(DEBUG_SCAN, "    2.4GHz: active %d passive %d",
+		     cfg->active[0], cfg->passive[0]);
+	wl1271_debug(DEBUG_SCAN, "    5GHz: active %d passive %d",
+		     cfg->active[1], cfg->passive[1]);
+
+	return idx;
+}
+
+int wl1271_scan_sched_scan_config(struct wl1271 *wl,
+				  struct cfg80211_sched_scan_request *req,
+				  struct ieee80211_sched_scan_ies *ies)
+{
+	struct wl1271_cmd_sched_scan_config *cfg = NULL;
+	struct conf_sched_scan_settings *c = &wl->conf.sched_scan;
+	int i, total_channels, ret;
+
+	wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config");
+
+	cfg = kzalloc(sizeof(*cfg), GFP_KERNEL);
+	if (!cfg)
+		return -ENOMEM;
+
+	cfg->rssi_threshold = c->rssi_threshold;
+	cfg->snr_threshold  = c->snr_threshold;
+	cfg->n_probe_reqs = c->num_probe_reqs;
+	/* cycles set to 0 it means infinite (until manually stopped) */
+	cfg->cycles = 0;
+	/* report APs when at least 1 is found */
+	cfg->report_after = 1;
+	/* don't stop scanning automatically when something is found */
+	cfg->terminate = 0;
+	cfg->tag = WL1271_SCAN_DEFAULT_TAG;
+	/* don't filter on BSS type */
+	cfg->bss_type = SCAN_BSS_TYPE_ANY;
+	/* currently NL80211 supports only a single interval */
+	for (i = 0; i < SCAN_MAX_CYCLE_INTERVALS; i++)
+		cfg->intervals[i] = cpu_to_le32(req->interval);
+
+	if (req->ssids[0].ssid_len && req->ssids[0].ssid) {
+		cfg->filter_type = SCAN_SSID_FILTER_SPECIFIC;
+		cfg->ssid_len = req->ssids[0].ssid_len;
+		memcpy(cfg->ssid, req->ssids[0].ssid,
+		       req->ssids[0].ssid_len);
+	} else {
+		cfg->filter_type = SCAN_SSID_FILTER_ANY;
+		cfg->ssid_len = 0;
+	}
+
+	total_channels = wl1271_scan_sched_scan_channels(wl, req, cfg);
+	if (total_channels == 0) {
+		wl1271_error("scan channel list is empty");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (cfg->active[0]) {
+		ret = wl1271_cmd_build_probe_req(wl, req->ssids[0].ssid,
+						 req->ssids[0].ssid_len,
+						 ies->ie[IEEE80211_BAND_2GHZ],
+						 ies->len[IEEE80211_BAND_2GHZ],
+						 IEEE80211_BAND_2GHZ);
+		if (ret < 0) {
+			wl1271_error("2.4GHz PROBE request template failed");
+			goto out;
+		}
+	}
+
+	if (cfg->active[1]) {
+		ret = wl1271_cmd_build_probe_req(wl,  req->ssids[0].ssid,
+						 req->ssids[0].ssid_len,
+						 ies->ie[IEEE80211_BAND_5GHZ],
+						 ies->len[IEEE80211_BAND_5GHZ],
+						 IEEE80211_BAND_5GHZ);
+		if (ret < 0) {
+			wl1271_error("5GHz PROBE request template failed");
+			goto out;
+		}
+	}
+
+	wl1271_dump(DEBUG_SCAN, "SCAN_CFG: ", cfg, sizeof(*cfg));
+
+	ret = wl1271_cmd_send(wl, CMD_CONNECTION_SCAN_CFG, cfg,
+			      sizeof(*cfg), 0);
+	if (ret < 0) {
+		wl1271_error("SCAN configuration failed");
+		goto out;
+	}
+out:
+	kfree(cfg);
+	return ret;
+}
+
+int wl1271_scan_sched_scan_start(struct wl1271 *wl)
+{
+	struct wl1271_cmd_sched_scan_start *start;
+	int ret = 0;
+
+	wl1271_debug(DEBUG_CMD, "cmd periodic scan start");
+
+	start = kzalloc(sizeof(*start), GFP_KERNEL);
+	if (!start)
+		return -ENOMEM;
+
+	start->tag = WL1271_SCAN_DEFAULT_TAG;
+
+	ret = wl1271_cmd_send(wl, CMD_START_PERIODIC_SCAN, start,
+			      sizeof(*start), 0);
+	if (ret < 0) {
+		wl1271_error("failed to send scan start command");
+		goto out_free;
+	}
+
+out_free:
+	kfree(start);
+	return ret;
+}
+
+void wl1271_scan_sched_scan_results(struct wl1271 *wl)
+{
+	wl1271_debug(DEBUG_SCAN, "got periodic scan results");
+
+	ieee80211_sched_scan_results(wl->hw);
+}
+
+void wl1271_scan_sched_scan_stop(struct wl1271 *wl)
+{
+	struct wl1271_cmd_sched_scan_stop *stop;
+	int ret = 0;
+
+	wl1271_debug(DEBUG_CMD, "cmd periodic scan stop");
+
+	/* FIXME: what to do if alloc'ing to stop fails? */
+	stop = kzalloc(sizeof(*stop), GFP_KERNEL);
+	if (!stop) {
+		wl1271_error("failed to alloc memory to send sched scan stop");
+		return;
+	}
+
+	stop->tag = WL1271_SCAN_DEFAULT_TAG;
+
+	ret = wl1271_cmd_send(wl, CMD_STOP_PERIODIC_SCAN, stop,
+			      sizeof(*stop), 0);
+	if (ret < 0)
+		wl1271_error("failed to send sched scan stop command");
+
+	kfree(stop);
+}
diff --git a/drivers/net/wireless/wl12xx/scan.h b/drivers/net/wireless/wl12xx/scan.h
index 421a750add5..c83319579ca 100644
--- a/drivers/net/wireless/wl12xx/scan.h
+++ b/drivers/net/wireless/wl12xx/scan.h
@@ -33,6 +33,12 @@ int wl1271_scan_build_probe_req(struct wl1271 *wl,
 				const u8 *ie, size_t ie_len, u8 band);
 void wl1271_scan_stm(struct wl1271 *wl);
 void wl1271_scan_complete_work(struct work_struct *work);
+int wl1271_scan_sched_scan_config(struct wl1271 *wl,
+				     struct cfg80211_sched_scan_request *req,
+				     struct ieee80211_sched_scan_ies *ies);
+int wl1271_scan_sched_scan_start(struct wl1271 *wl);
+void wl1271_scan_sched_scan_stop(struct wl1271 *wl);
+void wl1271_scan_sched_scan_results(struct wl1271 *wl);
 
 #define WL1271_SCAN_MAX_CHANNELS       24
 #define WL1271_SCAN_DEFAULT_TAG        1
@@ -106,4 +112,112 @@ struct wl1271_cmd_trigger_scan_to {
 	__le32 timeout;
 } __packed;
 
+#define MAX_CHANNELS_ALL_BANDS 41
+#define SCAN_MAX_CYCLE_INTERVALS 16
+#define SCAN_MAX_BANDS 3
+
+enum {
+	SCAN_CHANNEL_TYPE_2GHZ_PASSIVE,
+	SCAN_CHANNEL_TYPE_2GHZ_ACTIVE,
+	SCAN_CHANNEL_TYPE_5GHZ_PASSIVE,
+	SCAN_CHANNEL_TYPE_5GHZ_ACTIVE,
+	SCAN_CHANNEL_TYPE_5GHZ_DFS,
+};
+
+enum {
+	SCAN_SSID_FILTER_ANY      = 0,
+	SCAN_SSID_FILTER_SPECIFIC = 1,
+	SCAN_SSID_FILTER_LIST     = 2,
+	SCAN_SSID_FILTER_DISABLED = 3
+};
+
+enum {
+	SCAN_BSS_TYPE_INDEPENDENT,
+	SCAN_BSS_TYPE_INFRASTRUCTURE,
+	SCAN_BSS_TYPE_ANY,
+};
+
+struct conn_scan_ch_params {
+	__le16 min_duration;
+	__le16 max_duration;
+	__le16 passive_duration;
+
+	u8  channel;
+	u8  tx_power_att;
+
+	/* bit 0: DFS channel; bit 1: DFS enabled */
+	u8  flags;
+
+	u8  padding[3];
+} __packed;
+
+struct wl1271_cmd_sched_scan_config {
+	struct wl1271_cmd_header header;
+
+	__le32 intervals[SCAN_MAX_CYCLE_INTERVALS];
+
+	s8 rssi_threshold; /* for filtering (in dBm) */
+	s8 snr_threshold;  /* for filtering (in dB) */
+
+	u8 cycles;       /* maximum number of scan cycles */
+	u8 report_after; /* report when this number of results are received */
+	u8 terminate;    /* stop scanning after reporting */
+
+	u8 tag;
+	u8 bss_type; /* for filtering */
+	u8 filter_type;
+
+	u8 ssid_len;     /* For SCAN_SSID_FILTER_SPECIFIC */
+	u8 ssid[IW_ESSID_MAX_SIZE];
+
+	u8 n_probe_reqs; /* Number of probes requests per channel */
+
+	u8 passive[SCAN_MAX_BANDS];
+	u8 active[SCAN_MAX_BANDS];
+
+	u8 dfs;
+
+	u8 padding[3];
+
+	struct conn_scan_ch_params channels[MAX_CHANNELS_ALL_BANDS];
+} __packed;
+
+
+#define SCHED_SCAN_MAX_SSIDS 8
+
+enum {
+	SCAN_SSID_TYPE_PUBLIC = 0,
+	SCAN_SSID_TYPE_HIDDEN = 1,
+};
+
+struct wl1271_ssid {
+	u8 type;
+	u8 len;
+	u8 ssid[IW_ESSID_MAX_SIZE];
+	/* u8 padding[2]; */
+} __packed;
+
+struct wl1271_cmd_sched_scan_ssid_list {
+	struct wl1271_cmd_header header;
+
+	u8 n_ssids;
+	struct wl1271_ssid ssids[SCHED_SCAN_MAX_SSIDS];
+	u8 padding[3];
+} __packed;
+
+struct wl1271_cmd_sched_scan_start {
+	struct wl1271_cmd_header header;
+
+	u8 tag;
+	u8 padding[3];
+} __packed;
+
+struct wl1271_cmd_sched_scan_stop {
+	struct wl1271_cmd_header header;
+
+	u8 tag;
+	u8 padding[3];
+} __packed;
+
+
 #endif /* __WL1271_SCAN_H__ */
-- 
cgit v1.2.3


From 33c2c06cd2d766387cf919d0afd432cc5796c369 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Tue, 10 May 2011 14:46:02 +0300
Subject: wl12xx: implement scheduled scan driver operations and reporting

This patch adds the mac80211 operations for scheduled scan and the
scheduled scan results reporting.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/event.c  |  6 ++++
 drivers/net/wireless/wl12xx/main.c   | 70 ++++++++++++++++++++++++++++++++++++
 drivers/net/wireless/wl12xx/scan.c   |  6 +++-
 drivers/net/wireless/wl12xx/wl12xx.h |  2 ++
 4 files changed, 83 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/wl12xx/event.c b/drivers/net/wireless/wl12xx/event.c
index dc110e8a618..1e4bd6a2c39 100644
--- a/drivers/net/wireless/wl12xx/event.c
+++ b/drivers/net/wireless/wl12xx/event.c
@@ -191,11 +191,17 @@ static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
 	if (vector & PERIODIC_SCAN_REPORT_EVENT_ID) {
 		wl1271_debug(DEBUG_EVENT, "PERIODIC_SCAN_REPORT_EVENT "
 			     "(status 0x%0x)", mbox->scheduled_scan_status);
+
+		wl1271_scan_sched_scan_results(wl);
 	}
 
 	if (vector & PERIODIC_SCAN_COMPLETE_EVENT_ID) {
 		wl1271_debug(DEBUG_EVENT, "PERIODIC_SCAN_COMPLETE_EVENT "
 			     "(status 0x%0x)", mbox->scheduled_scan_status);
+		if (wl->sched_scanning) {
+			wl1271_scan_sched_scan_stop(wl);
+			ieee80211_sched_scan_stopped(wl->hw);
+		}
 	}
 
 	/* disable dynamic PS when requested by the firmware */
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 88d2e9052a0..a14a035aa44 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -988,6 +988,11 @@ static void wl1271_recovery_work(struct work_struct *work)
 	/* Prevent spurious TX during FW restart */
 	ieee80211_stop_queues(wl->hw);
 
+	if (wl->sched_scanning) {
+		ieee80211_sched_scan_stopped(wl->hw);
+		wl->sched_scanning = false;
+	}
+
 	/* reboot the chipset */
 	__wl1271_op_remove_interface(wl, false);
 	ieee80211_restart_hw(wl->hw);
@@ -1576,6 +1581,7 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl,
 	memset(wl->ap_hlid_map, 0, sizeof(wl->ap_hlid_map));
 	wl->ap_fw_ps_map = 0;
 	wl->ap_ps_map = 0;
+	wl->sched_scanning = false;
 
 	/*
 	 * this is performed after the cancel_work calls and the associated
@@ -1778,6 +1784,13 @@ static int wl1271_sta_handle_idle(struct wl1271 *wl, bool idle)
 		wl->session_counter++;
 		if (wl->session_counter >= SESSION_COUNTER_MAX)
 			wl->session_counter = 0;
+
+		/* The current firmware only supports sched_scan in idle */
+		if (wl->sched_scanning) {
+			wl1271_scan_sched_scan_stop(wl);
+			ieee80211_sched_scan_stopped(wl->hw);
+		}
+
 		ret = wl1271_dummy_join(wl);
 		if (ret < 0)
 			goto out;
@@ -2330,6 +2343,60 @@ out:
 	return ret;
 }
 
+static int wl1271_op_sched_scan_start(struct ieee80211_hw *hw,
+				      struct ieee80211_vif *vif,
+				      struct cfg80211_sched_scan_request *req,
+				      struct ieee80211_sched_scan_ies *ies)
+{
+	struct wl1271 *wl = hw->priv;
+	int ret;
+
+	wl1271_debug(DEBUG_MAC80211, "wl1271_op_sched_scan_start");
+
+	mutex_lock(&wl->mutex);
+
+	ret = wl1271_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out;
+
+	ret = wl1271_scan_sched_scan_config(wl, req, ies);
+	if (ret < 0)
+		goto out_sleep;
+
+	ret = wl1271_scan_sched_scan_start(wl);
+	if (ret < 0)
+		goto out_sleep;
+
+	wl->sched_scanning = true;
+
+out_sleep:
+	wl1271_ps_elp_sleep(wl);
+out:
+	mutex_unlock(&wl->mutex);
+	return ret;
+}
+
+static void wl1271_op_sched_scan_stop(struct ieee80211_hw *hw,
+				      struct ieee80211_vif *vif)
+{
+	struct wl1271 *wl = hw->priv;
+	int ret;
+
+	wl1271_debug(DEBUG_MAC80211, "wl1271_op_sched_scan_stop");
+
+	mutex_lock(&wl->mutex);
+
+	ret = wl1271_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out;
+
+	wl1271_scan_sched_scan_stop(wl);
+
+	wl1271_ps_elp_sleep(wl);
+out:
+	mutex_unlock(&wl->mutex);
+}
+
 static int wl1271_op_set_frag_threshold(struct ieee80211_hw *hw, u32 value)
 {
 	struct wl1271 *wl = hw->priv;
@@ -3445,6 +3512,8 @@ static const struct ieee80211_ops wl1271_ops = {
 	.tx = wl1271_op_tx,
 	.set_key = wl1271_op_set_key,
 	.hw_scan = wl1271_op_hw_scan,
+	.sched_scan_start = wl1271_op_sched_scan_start,
+	.sched_scan_stop = wl1271_op_sched_scan_stop,
 	.bss_info_changed = wl1271_op_bss_info_changed,
 	.set_frag_threshold = wl1271_op_set_frag_threshold,
 	.set_rts_threshold = wl1271_op_set_rts_threshold,
@@ -3765,6 +3834,7 @@ struct ieee80211_hw *wl1271_alloc_hw(void)
 	wl->ap_fw_ps_map = 0;
 	wl->quirks = 0;
 	wl->platform_quirks = 0;
+	wl->sched_scanning = false;
 
 	memset(wl->tx_frames_map, 0, sizeof(wl->tx_frames_map));
 	for (i = 0; i < ACX_TX_DESCRIPTORS; i++)
diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c
index d78044f0081..668ff46a682 100644
--- a/drivers/net/wireless/wl12xx/scan.c
+++ b/drivers/net/wireless/wl12xx/scan.c
@@ -548,8 +548,12 @@ void wl1271_scan_sched_scan_stop(struct wl1271 *wl)
 
 	ret = wl1271_cmd_send(wl, CMD_STOP_PERIODIC_SCAN, stop,
 			      sizeof(*stop), 0);
-	if (ret < 0)
+	if (ret < 0) {
 		wl1271_error("failed to send sched scan stop command");
+		goto out_free;
+	}
+	wl->sched_scanning = false;
 
+out_free:
 	kfree(stop);
 }
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index b7601438eca..10f076770fe 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -480,6 +480,8 @@ struct wl1271 {
 	struct wl1271_scan scan;
 	struct delayed_work scan_complete_work;
 
+	bool sched_scanning;
+
 	/* probe-req template for the current AP */
 	struct sk_buff *probereq;
 
-- 
cgit v1.2.3


From d3eff81de6048d8af8f95f52f0f06625980f2efb Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Tue, 10 May 2011 14:47:45 +0300
Subject: wl12xx: export scheduled scan state in debugfs

Add the sched_scanning value to the driver_status debugfs entry.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/debugfs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/wl12xx/debugfs.c b/drivers/net/wireless/wl12xx/debugfs.c
index b2f692babed..f1f8df9b6cd 100644
--- a/drivers/net/wireless/wl12xx/debugfs.c
+++ b/drivers/net/wireless/wl12xx/debugfs.c
@@ -377,6 +377,7 @@ static ssize_t driver_state_read(struct file *file, char __user *user_buf,
 	DRIVER_STATE_PRINT_HEX(platform_quirks);
 	DRIVER_STATE_PRINT_HEX(chip.id);
 	DRIVER_STATE_PRINT_STR(chip.fw_ver_str);
+	DRIVER_STATE_PRINT_INT(sched_scanning);
 
 #undef DRIVER_STATE_PRINT_INT
 #undef DRIVER_STATE_PRINT_LONG
-- 
cgit v1.2.3


From 683c002447c12742f5151691083f68524f33b13a Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Thu, 12 May 2011 17:07:55 +0300
Subject: wl12xx: prevent sched_scan when not idle or not in station mode

The current firmware only supports scheduled scan in station mode and
when idle.  To prevent the firmware from crashing, return -EOPNOTSUPP
when sched_scan start is called in an invalid state.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/scan.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c
index 668ff46a682..f37e5a39197 100644
--- a/drivers/net/wireless/wl12xx/scan.c
+++ b/drivers/net/wireless/wl12xx/scan.c
@@ -505,6 +505,12 @@ int wl1271_scan_sched_scan_start(struct wl1271 *wl)
 
 	wl1271_debug(DEBUG_CMD, "cmd periodic scan start");
 
+	if (wl->bss_type != BSS_TYPE_STA_BSS)
+		return -EOPNOTSUPP;
+
+	if (!test_bit(WL1271_FLAG_IDLE, &wl->flags))
+		return -EBUSY;
+
 	start = kzalloc(sizeof(*start), GFP_KERNEL);
 	if (!start)
 		return -ENOMEM;
-- 
cgit v1.2.3


From fe44870bcdf614e4abb35657c68081cda35ba741 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Thu, 12 May 2011 16:50:41 +0300
Subject: wl12xx: remove unused flag WL1271_FLAG_IDLE_REQUESTED

This flag is not used anymore, remove it from the list.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/wl12xx.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index 10f076770fe..ab0c2f155b8 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -351,7 +351,6 @@ enum wl12xx_flags {
 	WL1271_FLAG_PSM_REQUESTED,
 	WL1271_FLAG_IRQ_RUNNING,
 	WL1271_FLAG_IDLE,
-	WL1271_FLAG_IDLE_REQUESTED,
 	WL1271_FLAG_PSPOLL_FAILURE,
 	WL1271_FLAG_STA_STATE_SENT,
 	WL1271_FLAG_FW_TX_BUSY,
-- 
cgit v1.2.3


From 2c0f24636c80aa09990c507c0cede39add4b4724 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Fri, 13 May 2011 11:57:08 +0300
Subject: wl12xx_sdio: set interrupt as wake_up interrupt

set the sdio interrupt as wake_up interrupt, so we will be able
to wake up the suspended system (Wake-On-Wireless)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/sdio.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/wl12xx/sdio.c b/drivers/net/wireless/wl12xx/sdio.c
index bcd4ad7ba90..1298461c45d 100644
--- a/drivers/net/wireless/wl12xx/sdio.c
+++ b/drivers/net/wireless/wl12xx/sdio.c
@@ -267,6 +267,8 @@ static int __devinit wl1271_probe(struct sdio_func *func,
 		goto out_free;
 	}
 
+	enable_irq_wake(wl->irq);
+
 	disable_irq(wl->irq);
 
 	ret = wl1271_init_ieee80211(wl);
@@ -303,6 +305,7 @@ static void __devexit wl1271_remove(struct sdio_func *func)
 	pm_runtime_get_noresume(&func->dev);
 
 	wl1271_unregister_hw(wl);
+	disable_irq_wake(wl->irq);
 	free_irq(wl->irq, wl);
 	wl1271_free_hw(wl);
 }
-- 
cgit v1.2.3


From 402e48616078c1e56f55a69d314b77f1d750d6ad Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Fri, 13 May 2011 11:57:09 +0300
Subject: wl12xx: declare suspend/resume callbacks (for wowlan)

Additionally, add wow_enabled field to wl, to indicate
whether wowlan was configured.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c   | 19 +++++++++++++++++++
 drivers/net/wireless/wl12xx/wl12xx.h |  6 ++++++
 2 files changed, 25 insertions(+)

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index a14a035aa44..4b421d80187 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1350,6 +1350,23 @@ static struct notifier_block wl1271_dev_notifier = {
 	.notifier_call = wl1271_dev_notify,
 };
 
+static int wl1271_op_suspend(struct ieee80211_hw *hw,
+			    struct cfg80211_wowlan *wow)
+{
+	struct wl1271 *wl = hw->priv;
+	wl1271_debug(DEBUG_MAC80211, "mac80211 suspend wow=%d", !!wow);
+	wl->wow_enabled = !!wow;
+	return 0;
+}
+
+static int wl1271_op_resume(struct ieee80211_hw *hw)
+{
+	struct wl1271 *wl = hw->priv;
+	wl1271_debug(DEBUG_MAC80211, "mac80211 resume wow=%d",
+		     wl->wow_enabled);
+	return 0;
+}
+
 static int wl1271_op_start(struct ieee80211_hw *hw)
 {
 	wl1271_debug(DEBUG_MAC80211, "mac80211 start");
@@ -3506,6 +3523,8 @@ static const struct ieee80211_ops wl1271_ops = {
 	.stop = wl1271_op_stop,
 	.add_interface = wl1271_op_add_interface,
 	.remove_interface = wl1271_op_remove_interface,
+	.suspend = wl1271_op_suspend,
+	.resume = wl1271_op_resume,
 	.config = wl1271_op_config,
 	.prepare_multicast = wl1271_op_prepare_multicast,
 	.configure_filter = wl1271_op_configure_filter,
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index ab0c2f155b8..9629e90d9b5 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -564,6 +564,12 @@ struct wl1271 {
 
 	int tcxo_clock;
 
+	/*
+	 * wowlan trigger was configured during suspend.
+	 * (currently, only "ANY" trigger is supported)
+	 */
+	bool wow_enabled;
+
 	/*
 	 * AP-mode - links indexed by HLID. The global and broadcast links
 	 * are always active.
-- 
cgit v1.2.3


From 039bdb1494d1d514987ce596a4898494021c7af2 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Fri, 13 May 2011 11:57:10 +0300
Subject: wl12xx_sdio: set MMC_PM_KEEP_POWER flag on suspend

if a wow trigger was configured, set the MMC_PM_KEEP_POWER flag
on suspend, so our power will be kept while the system is suspended.

We needed to set this flag on each suspend attempt (when we want
to keep power)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/sdio.c | 29 ++++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/wl12xx/sdio.c b/drivers/net/wireless/wl12xx/sdio.c
index 1298461c45d..5b03fd5ee33 100644
--- a/drivers/net/wireless/wl12xx/sdio.c
+++ b/drivers/net/wireless/wl12xx/sdio.c
@@ -314,7 +314,34 @@ static int wl1271_suspend(struct device *dev)
 {
 	/* Tell MMC/SDIO core it's OK to power down the card
 	 * (if it isn't already), but not to remove it completely */
-	return 0;
+	struct sdio_func *func = dev_to_sdio_func(dev);
+	struct wl1271 *wl = sdio_get_drvdata(func);
+	mmc_pm_flag_t sdio_flags;
+	int ret = 0;
+
+	wl1271_debug(DEBUG_MAC80211, "wl1271 suspend. wow_enabled: %d",
+		     wl->wow_enabled);
+
+	/* check whether sdio should keep power */
+	if (wl->wow_enabled) {
+		sdio_flags = sdio_get_host_pm_caps(func);
+
+		if (!(sdio_flags & MMC_PM_KEEP_POWER)) {
+			wl1271_error("can't keep power while host "
+				     "is suspended");
+			ret = -EINVAL;
+			goto out;
+		}
+
+		/* keep power while host suspended */
+		ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
+		if (ret) {
+			wl1271_error("error while trying to keep power");
+			goto out;
+		}
+	}
+out:
+	return ret;
 }
 
 static int wl1271_resume(struct device *dev)
-- 
cgit v1.2.3


From f44e58681aec420b132a54823d8911293a644d4e Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Fri, 13 May 2011 11:57:11 +0300
Subject: wl12xx: prevent scheduling while suspending (WoW enabled)

When WoW is enabled, the interface will stay up and the chip will
be powered on, so we have to flush/cancel any remaining work, and
prevent the irq handler from scheduling a new work until the system
is resumed.

Add 2 new flags:
* WL1271_FLAG_SUSPENDED - the system is (about to be) suspended.
* WL1271_FLAG_PENDING_WORK - there is a pending irq work which
   should be scheduled when the system is being resumed.

In order to wake-up the system while getting an irq, we initialize
the device as wakeup device, and calling pm_wakeup_event() upon
getting the interrupt (while the system is about to be suspended)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c   | 46 ++++++++++++++++++++++++++++++++++++
 drivers/net/wireless/wl12xx/sdio.c   | 24 +++++++++++++++++++
 drivers/net/wireless/wl12xx/wl12xx.h |  2 ++
 3 files changed, 72 insertions(+)

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 4b421d80187..8f9e6152f3b 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1356,6 +1356,28 @@ static int wl1271_op_suspend(struct ieee80211_hw *hw,
 	struct wl1271 *wl = hw->priv;
 	wl1271_debug(DEBUG_MAC80211, "mac80211 suspend wow=%d", !!wow);
 	wl->wow_enabled = !!wow;
+	if (wl->wow_enabled) {
+		/* flush any remaining work */
+		wl1271_debug(DEBUG_MAC80211, "flushing remaining works");
+		flush_delayed_work(&wl->scan_complete_work);
+
+		/*
+		 * disable and re-enable interrupts in order to flush
+		 * the threaded_irq
+		 */
+		wl1271_disable_interrupts(wl);
+
+		/*
+		 * set suspended flag to avoid triggering a new threaded_irq
+		 * work. no need for spinlock as interrupts are disabled.
+		 */
+		set_bit(WL1271_FLAG_SUSPENDED, &wl->flags);
+
+		wl1271_enable_interrupts(wl);
+		flush_work(&wl->tx_work);
+		flush_delayed_work(&wl->pspoll_work);
+		flush_delayed_work(&wl->elp_work);
+	}
 	return 0;
 }
 
@@ -1364,6 +1386,30 @@ static int wl1271_op_resume(struct ieee80211_hw *hw)
 	struct wl1271 *wl = hw->priv;
 	wl1271_debug(DEBUG_MAC80211, "mac80211 resume wow=%d",
 		     wl->wow_enabled);
+
+	/*
+	 * re-enable irq_work enqueuing, and call irq_work directly if
+	 * there is a pending work.
+	 */
+	if (wl->wow_enabled) {
+		struct wl1271 *wl = hw->priv;
+		unsigned long flags;
+		bool run_irq_work = false;
+
+		spin_lock_irqsave(&wl->wl_lock, flags);
+		clear_bit(WL1271_FLAG_SUSPENDED, &wl->flags);
+		if (test_and_clear_bit(WL1271_FLAG_PENDING_WORK, &wl->flags))
+			run_irq_work = true;
+		spin_unlock_irqrestore(&wl->wl_lock, flags);
+
+		if (run_irq_work) {
+			wl1271_debug(DEBUG_MAC80211,
+				     "run postponed irq_work directly");
+			wl1271_irq(0, wl);
+			wl1271_enable_interrupts(wl);
+		}
+	}
+
 	return 0;
 }
 
diff --git a/drivers/net/wireless/wl12xx/sdio.c b/drivers/net/wireless/wl12xx/sdio.c
index 5b03fd5ee33..41183db3483 100644
--- a/drivers/net/wireless/wl12xx/sdio.c
+++ b/drivers/net/wireless/wl12xx/sdio.c
@@ -82,6 +82,16 @@ static irqreturn_t wl1271_hardirq(int irq, void *cookie)
 		complete(wl->elp_compl);
 		wl->elp_compl = NULL;
 	}
+
+	if (test_bit(WL1271_FLAG_SUSPENDED, &wl->flags)) {
+		/* don't enqueue a work right now. mark it as pending */
+		set_bit(WL1271_FLAG_PENDING_WORK, &wl->flags);
+		wl1271_debug(DEBUG_IRQ, "should not enqueue work");
+		disable_irq_nosync(wl->irq);
+		pm_wakeup_event(wl1271_sdio_wl_to_dev(wl), 0);
+		spin_unlock_irqrestore(&wl->wl_lock, flags);
+		return IRQ_HANDLED;
+	}
 	spin_unlock_irqrestore(&wl->wl_lock, flags);
 
 	return IRQ_WAKE_THREAD;
@@ -268,6 +278,7 @@ static int __devinit wl1271_probe(struct sdio_func *func,
 	}
 
 	enable_irq_wake(wl->irq);
+	device_init_wakeup(wl1271_sdio_wl_to_dev(wl), 1);
 
 	disable_irq(wl->irq);
 
@@ -305,6 +316,7 @@ static void __devexit wl1271_remove(struct sdio_func *func)
 	pm_runtime_get_noresume(&func->dev);
 
 	wl1271_unregister_hw(wl);
+	device_init_wakeup(wl1271_sdio_wl_to_dev(wl), 0);
 	disable_irq_wake(wl->irq);
 	free_irq(wl->irq, wl);
 	wl1271_free_hw(wl);
@@ -339,6 +351,9 @@ static int wl1271_suspend(struct device *dev)
 			wl1271_error("error while trying to keep power");
 			goto out;
 		}
+
+		/* release host */
+		sdio_release_host(func);
 	}
 out:
 	return ret;
@@ -346,6 +361,15 @@ out:
 
 static int wl1271_resume(struct device *dev)
 {
+	struct sdio_func *func = dev_to_sdio_func(dev);
+	struct wl1271 *wl = sdio_get_drvdata(func);
+
+	wl1271_debug(DEBUG_MAC80211, "wl1271 resume");
+	if (wl->wow_enabled) {
+		/* claim back host */
+		sdio_claim_host(func);
+	}
+
 	return 0;
 }
 
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index 9629e90d9b5..2218b9c6384 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -357,6 +357,8 @@ enum wl12xx_flags {
 	WL1271_FLAG_AP_STARTED,
 	WL1271_FLAG_IF_INITIALIZED,
 	WL1271_FLAG_DUMMY_PACKET_PENDING,
+	WL1271_FLAG_SUSPENDED,
+	WL1271_FLAG_PENDING_WORK,
 };
 
 struct wl1271_link {
-- 
cgit v1.2.3


From f795ea8b2f047409c59e891d6e5e86a925048bf4 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Fri, 13 May 2011 11:57:12 +0300
Subject: wl12xx_sdio: declare support for NL80211_WOW_TRIGGER_ANYTHING trigger

Since wowlan requires the ability to stay awake while the host
is suspended, declare support for NL80211_WOW_TRIGGER_ANYTHING
if the MMC_PM_KEEP_POWER capability is being supported.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/sdio.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/wireless/wl12xx/sdio.c b/drivers/net/wireless/wl12xx/sdio.c
index 41183db3483..92d29a860fc 100644
--- a/drivers/net/wireless/wl12xx/sdio.c
+++ b/drivers/net/wireless/wl12xx/sdio.c
@@ -231,6 +231,7 @@ static int __devinit wl1271_probe(struct sdio_func *func,
 	const struct wl12xx_platform_data *wlan_data;
 	struct wl1271 *wl;
 	unsigned long irqflags;
+	mmc_pm_flag_t mmcflags;
 	int ret;
 
 	/* We are only able to handle the wlan function */
@@ -282,6 +283,13 @@ static int __devinit wl1271_probe(struct sdio_func *func,
 
 	disable_irq(wl->irq);
 
+	/* if sdio can keep power while host is suspended, enable wow */
+	mmcflags = sdio_get_host_pm_caps(func);
+	wl1271_debug(DEBUG_SDIO, "sdio PM caps = 0x%x", mmcflags);
+
+	if (mmcflags & MMC_PM_KEEP_POWER)
+		hw->wiphy->wowlan.flags = WIPHY_WOWLAN_ANY;
+
 	ret = wl1271_init_ieee80211(wl);
 	if (ret)
 		goto out_irq;
-- 
cgit v1.2.3


From 9439064cd9fce8a4db716a748dbf581eb234f9c7 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Fri, 13 May 2011 11:57:13 +0300
Subject: wl12xx: enter/exit psm on wowlan suspend/resume

When operating as station, enter psm before suspending
the device into wowlan state.

Add a new completion event to signal when psm was entered
successfully.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/event.c  |  7 ++++
 drivers/net/wireless/wl12xx/main.c   | 81 ++++++++++++++++++++++++++++++++++++
 drivers/net/wireless/wl12xx/ps.h     |  2 +
 drivers/net/wireless/wl12xx/wl12xx.h |  1 +
 4 files changed, 91 insertions(+)

diff --git a/drivers/net/wireless/wl12xx/event.c b/drivers/net/wireless/wl12xx/event.c
index 1e4bd6a2c39..c3c554cd658 100644
--- a/drivers/net/wireless/wl12xx/event.c
+++ b/drivers/net/wireless/wl12xx/event.c
@@ -135,6 +135,13 @@ static int wl1271_event_ps_report(struct wl1271 *wl,
 
 		/* enable beacon early termination */
 		ret = wl1271_acx_bet_enable(wl, true);
+		if (ret < 0)
+			break;
+
+		if (wl->ps_compl) {
+			complete(wl->ps_compl);
+			wl->ps_compl = NULL;
+		}
 		break;
 	default:
 		break;
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 8f9e6152f3b..610be03a198 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1350,6 +1350,79 @@ static struct notifier_block wl1271_dev_notifier = {
 	.notifier_call = wl1271_dev_notify,
 };
 
+static int wl1271_configure_suspend(struct wl1271 *wl)
+{
+	int ret;
+
+	if (wl->bss_type != BSS_TYPE_STA_BSS)
+		return 0;
+
+	mutex_lock(&wl->mutex);
+
+	ret = wl1271_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out_unlock;
+
+	/* enter psm if needed*/
+	if (!test_bit(WL1271_FLAG_PSM, &wl->flags)) {
+		DECLARE_COMPLETION_ONSTACK(compl);
+
+		wl->ps_compl = &compl;
+		ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE,
+				   wl->basic_rate, true);
+		if (ret < 0)
+			goto out_sleep;
+
+		/* we must unlock here so we will be able to get events */
+		wl1271_ps_elp_sleep(wl);
+		mutex_unlock(&wl->mutex);
+
+		ret = wait_for_completion_timeout(
+			&compl, msecs_to_jiffies(WL1271_PS_COMPLETE_TIMEOUT));
+		if (ret <= 0) {
+			wl1271_warning("couldn't enter ps mode!");
+			ret = -EBUSY;
+			goto out;
+		}
+
+		/* take mutex again, and wakeup */
+		mutex_lock(&wl->mutex);
+
+		ret = wl1271_ps_elp_wakeup(wl);
+		if (ret < 0)
+			goto out_unlock;
+	}
+out_sleep:
+	wl1271_ps_elp_sleep(wl);
+out_unlock:
+	mutex_unlock(&wl->mutex);
+out:
+	return ret;
+
+}
+
+static void wl1271_configure_resume(struct wl1271 *wl)
+{
+	int ret;
+
+	if (wl->bss_type != BSS_TYPE_STA_BSS)
+		return;
+
+	mutex_lock(&wl->mutex);
+	ret = wl1271_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out;
+
+	/* exit psm if it wasn't configured */
+	if (!test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags))
+		wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE,
+				   wl->basic_rate, true);
+
+	wl1271_ps_elp_sleep(wl);
+out:
+	mutex_unlock(&wl->mutex);
+}
+
 static int wl1271_op_suspend(struct ieee80211_hw *hw,
 			    struct cfg80211_wowlan *wow)
 {
@@ -1357,6 +1430,12 @@ static int wl1271_op_suspend(struct ieee80211_hw *hw,
 	wl1271_debug(DEBUG_MAC80211, "mac80211 suspend wow=%d", !!wow);
 	wl->wow_enabled = !!wow;
 	if (wl->wow_enabled) {
+		int ret;
+		ret = wl1271_configure_suspend(wl);
+		if (ret < 0) {
+			wl1271_warning("couldn't prepare device to suspend");
+			return ret;
+		}
 		/* flush any remaining work */
 		wl1271_debug(DEBUG_MAC80211, "flushing remaining works");
 		flush_delayed_work(&wl->scan_complete_work);
@@ -1408,6 +1487,8 @@ static int wl1271_op_resume(struct ieee80211_hw *hw)
 			wl1271_irq(0, wl);
 			wl1271_enable_interrupts(wl);
 		}
+
+		wl1271_configure_resume(wl);
 	}
 
 	return 0;
diff --git a/drivers/net/wireless/wl12xx/ps.h b/drivers/net/wireless/wl12xx/ps.h
index c41bd0a711b..25eb9bc9b62 100644
--- a/drivers/net/wireless/wl12xx/ps.h
+++ b/drivers/net/wireless/wl12xx/ps.h
@@ -35,4 +35,6 @@ void wl1271_elp_work(struct work_struct *work);
 void wl1271_ps_link_start(struct wl1271 *wl, u8 hlid, bool clean_queues);
 void wl1271_ps_link_end(struct wl1271 *wl, u8 hlid);
 
+#define WL1271_PS_COMPLETE_TIMEOUT 500
+
 #endif /* __WL1271_PS_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index 2218b9c6384..fbe8f46d123 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -513,6 +513,7 @@ struct wl1271 {
 	unsigned int rx_filter;
 
 	struct completion *elp_compl;
+	struct completion *ps_compl;
 	struct delayed_work elp_work;
 	struct delayed_work pspoll_work;
 
-- 
cgit v1.2.3


From 1159024d4c0aafecaa0c6635c55153b4b39cc1c8 Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Fri, 13 May 2011 09:23:47 -0400
Subject: ssb: fix pcicore build breakage

drivers/ssb/main.c:1336: error: 'SSB_PCICORE_BCAST_ADDR' undeclared (first use in this function)
drivers/ssb/main.c:1337: error: 'SSB_PCICORE_BCAST_DATA' undeclared (first use in this function)
drivers/ssb/main.c:1349: error: 'struct ssb_pcicore' has no member named 'dev'

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/ssb/main.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index ee2937c4142..f8a13f86321 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -1332,21 +1332,27 @@ EXPORT_SYMBOL(ssb_bus_powerup);
 static void ssb_broadcast_value(struct ssb_device *dev,
 				u32 address, u32 data)
 {
+#ifdef CONFIG_SSB_DRIVER_PCICORE
 	/* This is used for both, PCI and ChipCommon core, so be careful. */
 	BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
 	BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
+#endif
 
-	ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address);
-	ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */
-	ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data);
-	ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */
+	ssb_write32(dev, SSB_CHIPCO_BCAST_ADDR, address);
+	ssb_read32(dev, SSB_CHIPCO_BCAST_ADDR); /* flush */
+	ssb_write32(dev, SSB_CHIPCO_BCAST_DATA, data);
+	ssb_read32(dev, SSB_CHIPCO_BCAST_DATA); /* flush */
 }
 
 void ssb_commit_settings(struct ssb_bus *bus)
 {
 	struct ssb_device *dev;
 
+#ifdef CONFIG_SSB_DRIVER_PCICORE
 	dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
+#else
+	dev = bus->chipco.dev;
+#endif
 	if (WARN_ON(!dev))
 		return;
 	/* This forces an update of the cached registers. */
-- 
cgit v1.2.3


From 8220ba3e2e671492b777159d8dac721f95f4a0ec Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Thu, 12 May 2011 16:50:04 -0700
Subject: iwlegacy: Silence DEBUG_STRICT_USER_COPY_CHECKS=y warning

Enabling DEBUG_STRICT_USER_COPY_CHECKS causes the following
warning:

In file included from arch/x86/include/asm/uaccess.h:573,
                 from include/net/checksum.h:25,
                 from include/linux/skbuff.h:28,
                 from drivers/net/wireless/iwlegacy/iwl-4965-rs.c:28:
In function 'copy_from_user',
    inlined from 'iwl4965_rs_sta_dbgfs_scale_table_write' at
    drivers/net/wireless/iwlegacy/iwl-4965-rs.c:2616:
arch/x86/include/asm/uaccess_64.h:65:
warning: call to 'copy_from_user_overflow' declared with
attribute warning: copy_from_user() buffer size is not provably
correct

presumably due to buf_size being signed causing GCC to fail to
see that buf_size can't become negative.

Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlegacy/iwl-4965-rs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-rs.c b/drivers/net/wireless/iwlegacy/iwl-4965-rs.c
index 89509392ef5..24d149909ba 100644
--- a/drivers/net/wireless/iwlegacy/iwl-4965-rs.c
+++ b/drivers/net/wireless/iwlegacy/iwl-4965-rs.c
@@ -2604,7 +2604,7 @@ static ssize_t iwl4965_rs_sta_dbgfs_scale_table_write(struct file *file,
 	struct iwl_lq_sta *lq_sta = file->private_data;
 	struct iwl_priv *priv;
 	char buf[64];
-	int buf_size;
+	size_t buf_size;
 	u32 parsed_rate;
 	struct iwl_station_priv *sta_priv =
 		container_of(lq_sta, struct iwl_station_priv, lq_sta);
-- 
cgit v1.2.3


From 805d7d23ef9806e47b550ad80270c4cea4ffc984 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Thu, 12 May 2011 16:50:05 -0700
Subject: iwlwifi: Silence DEBUG_STRICT_USER_COPY_CHECKS=y warning

Enabling DEBUG_STRICT_USER_COPY_CHECKS causes the following
warning:

In file included from arch/x86/include/asm/uaccess.h:573,
                 from include/net/checksum.h:25,
                 from include/linux/skbuff.h:28,
                 from drivers/net/wireless/iwlwifi/iwl-agn-rs.c:28:
In function 'copy_from_user',
    inlined from 'rs_sta_dbgfs_scale_table_write' at
    drivers/net/wireless/iwlwifi/iwl-agn-rs.c:3099:
arch/x86/include/asm/uaccess_64.h:65:
warning: call to 'copy_from_user_overflow' declared with
attribute warning: copy_from_user() buffer size is not provably
correct

presumably due to buf_size being signed causing GCC to fail to
see that buf_size can't become negative.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index dbe6295bbf2..91f26556ac2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -3086,7 +3086,7 @@ static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file,
 	struct iwl_lq_sta *lq_sta = file->private_data;
 	struct iwl_priv *priv;
 	char buf[64];
-	int buf_size;
+	size_t buf_size;
 	u32 parsed_rate;
 	struct iwl_station_priv *sta_priv =
 		container_of(lq_sta, struct iwl_station_priv, lq_sta);
-- 
cgit v1.2.3


From 7527a782e187d1214a5b3dc2897ce441033bb4ef Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 13 May 2011 10:58:57 +0200
Subject: cfg80211: advertise possible interface combinations

Add the ability to advertise interface combinations in nl80211.
This allows the driver to indicate what the combinations are
that it supports. "Combinations" of just a single interface are
implicit, as previously. Note that cfg80211 will enforce that
the restrictions are met, but not for all drivers yet (once all
drivers are updated, we can remove the flag and enforce for all).

When no combinations are actually supported, an empty list will
be exported so that userspace can know if the kernel exported
this info or not (although it isn't clear to me what tools using
the info should do if the kernel didn't export it).

Since some interface types are purely virtual/software and don't
fit the restrictions, those are exposed in a new list of pure SW
types, not subject to restrictions. This mainly exists to handle
AP-VLAN and monitor interfaces in mac80211.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/nl80211.h | 122 +++++++++++++++++++++++++++++++++++++++++++++++-
 include/net/cfg80211.h  |  88 ++++++++++++++++++++++++++++++++++
 net/mac80211/main.c     |  16 +++++--
 net/wireless/core.c     |  69 +++++++++++++++++++++++++++
 net/wireless/core.h     |  11 +++++
 net/wireless/nl80211.c  | 105 +++++++++++++++++++++++++++++++++++------
 net/wireless/util.c     |  80 +++++++++++++++++++++++++++++++
 7 files changed, 472 insertions(+), 19 deletions(-)

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 281a2bb6a6e..0ea497cb607 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -76,6 +76,39 @@
  * below.
  */
 
+/**
+ * DOC: Virtual interface / concurrency capabilities
+ *
+ * Some devices are able to operate with virtual MACs, they can have
+ * more than one virtual interface. The capability handling for this
+ * is a bit complex though, as there may be a number of restrictions
+ * on the types of concurrency that are supported.
+ *
+ * To start with, each device supports the interface types listed in
+ * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the
+ * types there no concurrency is implied.
+ *
+ * Once concurrency is desired, more attributes must be observed:
+ * To start with, since some interface types are purely managed in
+ * software, like the AP-VLAN type in mac80211 for example, there's
+ * an additional list of these, they can be added at any time and
+ * are only restricted by some semantic restrictions (e.g. AP-VLAN
+ * cannot be added without a corresponding AP interface). This list
+ * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
+ *
+ * Further, the list of supported combinations is exported. This is
+ * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically,
+ * it exports a list of "groups", and at any point in time the
+ * interfaces that are currently active must fall into any one of
+ * the advertised groups. Within each group, there are restrictions
+ * on the number of interfaces of different types that are supported
+ * and also the number of different channels, along with potentially
+ * some other restrictions. See &enum nl80211_if_combination_attrs.
+ *
+ * All together, these attributes define the concurrency of virtual
+ * interfaces that a given device supports.
+ */
+
 /**
  * enum nl80211_commands - supported nl80211 commands
  *
@@ -954,6 +987,14 @@ enum nl80211_commands {
  * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
  *	cycles, in msecs.
  *
+ * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
+ *	interface combinations. In each nested item, it contains attributes
+ *	defined in &enum nl80211_if_combination_attrs.
+ * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
+ *	%NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that
+ *	are managed in software: interfaces of these types aren't subject to
+ *	any restrictions in their number or combinations.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1149,6 +1190,9 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_SCHED_SCAN_INTERVAL,
 
+	NL80211_ATTR_INTERFACE_COMBINATIONS,
+	NL80211_ATTR_SOFTWARE_IFTYPES,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -1201,7 +1245,9 @@ enum nl80211_attrs {
  * @NL80211_IFTYPE_ADHOC: independent BSS member
  * @NL80211_IFTYPE_STATION: managed BSS member
  * @NL80211_IFTYPE_AP: access point
- * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points
+ * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces
+ *	are a bit special in that they must always be tied to a pre-existing
+ *	AP type interface.
  * @NL80211_IFTYPE_WDS: wireless distribution interface
  * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
  * @NL80211_IFTYPE_MESH_POINT: mesh point
@@ -2206,4 +2252,78 @@ enum nl80211_wowlan_triggers {
 	MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1
 };
 
+/**
+ * enum nl80211_iface_limit_attrs - limit attributes
+ * @NL80211_IFACE_LIMIT_UNSPEC: (reserved)
+ * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that
+ *	can be chosen from this set of interface types (u32)
+ * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a
+ *	flag attribute for each interface type in this set
+ * @NUM_NL80211_IFACE_LIMIT: number of attributes
+ * @MAX_NL80211_IFACE_LIMIT: highest attribute number
+ */
+enum nl80211_iface_limit_attrs {
+	NL80211_IFACE_LIMIT_UNSPEC,
+	NL80211_IFACE_LIMIT_MAX,
+	NL80211_IFACE_LIMIT_TYPES,
+
+	/* keep last */
+	NUM_NL80211_IFACE_LIMIT,
+	MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1
+};
+
+/**
+ * enum nl80211_if_combination_attrs -- interface combination attributes
+ *
+ * @NL80211_IFACE_COMB_UNSPEC: (reserved)
+ * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits
+ *	for given interface types, see &enum nl80211_iface_limit_attrs.
+ * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of
+ *	interfaces that can be created in this group. This number doesn't
+ *	apply to interfaces purely managed in software, which are listed
+ *	in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE.
+ * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that
+ *	beacon intervals within this group must be all the same even for
+ *	infrastructure and AP/GO combinations, i.e. the GO(s) must adopt
+ *	the infrastructure network's beacon interval.
+ * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
+ *	different channels may be used within this group.
+ * @NUM_NL80211_IFACE_COMB: number of attributes
+ * @MAX_NL80211_IFACE_COMB: highest attribute number
+ *
+ * Examples:
+ *	limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
+ *	=> allows an AP and a STA that must match BIs
+ *
+ *	numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8
+ *	=> allows 8 of AP/GO
+ *
+ *	numbers = [ #{STA} <= 2 ], channels = 2, max = 2
+ *	=> allows two STAs on different channels
+ *
+ *	numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
+ *	=> allows a STA plus three P2P interfaces
+ *
+ * The list of these four possiblities could completely be contained
+ * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
+ * that any of these groups must match.
+ *
+ * "Combinations" of just a single interface will not be listed here,
+ * a single interface of any valid interface type is assumed to always
+ * be possible by itself. This means that implicitly, for each valid
+ * interface type, the following group always exists:
+ *	numbers = [ #{<type>} <= 1 ], channels = 1, max = 1
+ */
+enum nl80211_if_combination_attrs {
+	NL80211_IFACE_COMB_UNSPEC,
+	NL80211_IFACE_COMB_LIMITS,
+	NL80211_IFACE_COMB_MAXNUM,
+	NL80211_IFACE_COMB_STA_AP_BI_MATCH,
+	NL80211_IFACE_COMB_NUM_CHANNELS,
+
+	/* keep last */
+	NUM_NL80211_IFACE_COMB,
+	MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1
+};
+
 #endif /* __LINUX_NL80211_H */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index e1f1b41f7b1..04afcfb9eaf 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1547,6 +1547,10 @@ struct cfg80211_ops {
  *	hints read the documenation for regulatory_hint_found_beacon()
  * @WIPHY_FLAG_NETNS_OK: if not set, do not allow changing the netns of this
  *	wiphy at all
+ * @WIPHY_FLAG_ENFORCE_COMBINATIONS: Set this flag to enforce interface
+ *	combinations for this device. This flag is used for backward
+ *	compatibility only until all drivers advertise combinations and
+ *	they will always be enforced.
  * @WIPHY_FLAG_PS_ON_BY_DEFAULT: if set to true, powersave will be enabled
  *	by default -- this flag will be set depending on the kernel's default
  *	on wiphy_new(), but can be changed by the driver if it has a good
@@ -1574,6 +1578,81 @@ enum wiphy_flags {
 	WIPHY_FLAG_IBSS_RSN			= BIT(8),
 	WIPHY_FLAG_MESH_AUTH			= BIT(10),
 	WIPHY_FLAG_SUPPORTS_SCHED_SCAN		= BIT(11),
+	WIPHY_FLAG_ENFORCE_COMBINATIONS		= BIT(12),
+};
+
+/**
+ * struct ieee80211_iface_limit - limit on certain interface types
+ * @max: maximum number of interfaces of these types
+ * @types: interface types (bits)
+ */
+struct ieee80211_iface_limit {
+	u16 max;
+	u16 types;
+};
+
+/**
+ * struct ieee80211_iface_combination - possible interface combination
+ * @limits: limits for the given interface types
+ * @n_limits: number of limitations
+ * @num_different_channels: can use up to this many different channels
+ * @max_interfaces: maximum number of interfaces in total allowed in this
+ *	group
+ * @beacon_int_infra_match: In this combination, the beacon intervals
+ *	between infrastructure and AP types must match. This is required
+ *	only in special cases.
+ *
+ * These examples can be expressed as follows:
+ *
+ * Allow #STA <= 1, #AP <= 1, matching BI, channels = 1, 2 total:
+ *
+ *  struct ieee80211_iface_limit limits1[] = {
+ *	{ .max = 1, .types = BIT(NL80211_IFTYPE_STATION), },
+ *	{ .max = 1, .types = BIT(NL80211_IFTYPE_AP}, },
+ *  };
+ *  struct ieee80211_iface_combination combination1 = {
+ *	.limits = limits1,
+ *	.n_limits = ARRAY_SIZE(limits1),
+ *	.max_interfaces = 2,
+ *	.beacon_int_infra_match = true,
+ *  };
+ *
+ *
+ * Allow #{AP, P2P-GO} <= 8, channels = 1, 8 total:
+ *
+ *  struct ieee80211_iface_limit limits2[] = {
+ *	{ .max = 8, .types = BIT(NL80211_IFTYPE_AP) |
+ *			     BIT(NL80211_IFTYPE_P2P_GO), },
+ *  };
+ *  struct ieee80211_iface_combination combination2 = {
+ *	.limits = limits2,
+ *	.n_limits = ARRAY_SIZE(limits2),
+ *	.max_interfaces = 8,
+ *	.num_different_channels = 1,
+ *  };
+ *
+ *
+ * Allow #STA <= 1, #{P2P-client,P2P-GO} <= 3 on two channels, 4 total.
+ * This allows for an infrastructure connection and three P2P connections.
+ *
+ *  struct ieee80211_iface_limit limits3[] = {
+ *	{ .max = 1, .types = BIT(NL80211_IFTYPE_STATION), },
+ *	{ .max = 3, .types = BIT(NL80211_IFTYPE_P2P_GO) |
+ *			     BIT(NL80211_IFTYPE_P2P_CLIENT), },
+ *  };
+ *  struct ieee80211_iface_combination combination3 = {
+ *	.limits = limits3,
+ *	.n_limits = ARRAY_SIZE(limits3),
+ *	.max_interfaces = 4,
+ *	.num_different_channels = 2,
+ *  };
+ */
+struct ieee80211_iface_combination {
+	const struct ieee80211_iface_limit *limits;
+	u32 num_different_channels;
+	u16 max_interfaces;
+	u8 n_limits;
+	bool beacon_int_infra_match;
 };
 
 struct mac_address {
@@ -1653,6 +1732,11 @@ struct wiphy_wowlan_support {
  * @priv: driver private data (sized according to wiphy_new() parameter)
  * @interface_modes: bitmask of interfaces types valid for this wiphy,
  *	must be set by driver
+ * @iface_combinations: Valid interface combinations array, should not
+ *	list single interface types.
+ * @n_iface_combinations: number of entries in @iface_combinations array.
+ * @software_iftypes: bitmask of software interface types, these are not
+ *	subject to any restrictions since they are purely managed in SW.
  * @flags: wiphy flags, see &enum wiphy_flags
  * @bss_priv_size: each BSS struct has private data allocated with it,
  *	this variable determines its size
@@ -1697,6 +1781,10 @@ struct wiphy {
 
 	const struct ieee80211_txrx_stypes *mgmt_stypes;
 
+	const struct ieee80211_iface_combination *iface_combinations;
+	int n_iface_combinations;
+	u16 software_iftypes;
+
 	u16 n_addresses;
 
 	/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 7f89011fa22..79a2281678b 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -685,7 +685,7 @@ EXPORT_SYMBOL(ieee80211_alloc_hw);
 int ieee80211_register_hw(struct ieee80211_hw *hw)
 {
 	struct ieee80211_local *local = hw_to_local(hw);
-	int result;
+	int result, i;
 	enum ieee80211_band band;
 	int channels, max_bitrates;
 	bool supp_ht;
@@ -743,11 +743,19 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 		return -ENOMEM;
 
 	/* if low-level driver supports AP, we also support VLAN */
-	if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_AP))
-		local->hw.wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP_VLAN);
+	if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_AP)) {
+		hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP_VLAN);
+		hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_AP_VLAN);
+	}
 
 	/* mac80211 always supports monitor */
-	local->hw.wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
+	hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
+	hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_MONITOR);
+
+	/* mac80211 doesn't support more than 1 channel */
+	for (i = 0; i < hw->wiphy->n_iface_combinations; i++)
+		if (hw->wiphy->iface_combinations[i].num_different_channels > 1)
+			return -EINVAL;
 
 #ifndef CONFIG_MAC80211_MESH
 	/* mesh depends on Kconfig, but drivers should set it if they want */
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 18b002f1686..c22ef3492ee 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -416,6 +416,67 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv)
 }
 EXPORT_SYMBOL(wiphy_new);
 
+static int wiphy_verify_combinations(struct wiphy *wiphy)
+{
+	const struct ieee80211_iface_combination *c;
+	int i, j;
+
+	/* If we have combinations enforce them */
+	if (wiphy->n_iface_combinations)
+		wiphy->flags |= WIPHY_FLAG_ENFORCE_COMBINATIONS;
+
+	for (i = 0; i < wiphy->n_iface_combinations; i++) {
+		u32 cnt = 0;
+		u16 all_iftypes = 0;
+
+		c = &wiphy->iface_combinations[i];
+
+		/* Combinations with just one interface aren't real */
+		if (WARN_ON(c->max_interfaces < 2))
+			return -EINVAL;
+
+		/* Need at least one channel */
+		if (WARN_ON(!c->num_different_channels))
+			return -EINVAL;
+
+		if (WARN_ON(!c->n_limits))
+			return -EINVAL;
+
+		for (j = 0; j < c->n_limits; j++) {
+			u16 types = c->limits[j].types;
+
+			/*
+			 * interface types shouldn't overlap, this is
+			 * used in cfg80211_can_change_interface()
+			 */
+			if (WARN_ON(types & all_iftypes))
+				return -EINVAL;
+			all_iftypes |= types;
+
+			if (WARN_ON(!c->limits[j].max))
+				return -EINVAL;
+
+			/* Shouldn't list software iftypes in combinations! */
+			if (WARN_ON(wiphy->software_iftypes & types))
+				return -EINVAL;
+
+			cnt += c->limits[j].max;
+			/*
+			 * Don't advertise an unsupported type
+			 * in a combination.
+			 */
+			if (WARN_ON((wiphy->interface_modes & types) != types))
+				return -EINVAL;
+		}
+
+		/* You can't even choose that many! */
+		if (WARN_ON(cnt < c->max_interfaces))
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
 int wiphy_register(struct wiphy *wiphy)
 {
 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
@@ -444,6 +505,10 @@ int wiphy_register(struct wiphy *wiphy)
 	if (WARN_ON(ifmodes != wiphy->interface_modes))
 		wiphy->interface_modes = ifmodes;
 
+	res = wiphy_verify_combinations(wiphy);
+	if (res)
+		return res;
+
 	/* sanity check supported bands/channels */
 	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
 		sband = wiphy->bands[band];
@@ -698,6 +763,7 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
 	struct net_device *dev = ndev;
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 	struct cfg80211_registered_device *rdev;
+	int ret;
 
 	if (!wdev)
 		return NOTIFY_DONE;
@@ -893,6 +959,9 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
 			return notifier_from_errno(-EOPNOTSUPP);
 		if (rfkill_blocked(rdev->rfkill))
 			return notifier_from_errno(-ERFKILL);
+		ret = cfg80211_can_add_interface(rdev, wdev->iftype);
+		if (ret)
+			return notifier_from_errno(ret);
 		break;
 	}
 
diff --git a/net/wireless/core.h b/net/wireless/core.h
index d4b8f4c0bbb..bf0fb40e3c8 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -422,6 +422,17 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
 			  u32 *flags, struct vif_params *params);
 void cfg80211_process_rdev_events(struct cfg80211_registered_device *rdev);
 
+int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev,
+				  struct wireless_dev *wdev,
+				  enum nl80211_iftype iftype);
+
+static inline int
+cfg80211_can_add_interface(struct cfg80211_registered_device *rdev,
+			   enum nl80211_iftype iftype)
+{
+	return cfg80211_can_change_interface(rdev, NULL, iftype);
+}
+
 struct ieee80211_channel *
 rdev_freq_to_chan(struct cfg80211_registered_device *rdev,
 		  int freq, enum nl80211_channel_type channel_type);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 9ef8e287d61..beac296b1fd 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -564,6 +564,88 @@ static int nl80211_key_allowed(struct wireless_dev *wdev)
 	return 0;
 }
 
+static int nl80211_put_iftypes(struct sk_buff *msg, u32 attr, u16 ifmodes)
+{
+	struct nlattr *nl_modes = nla_nest_start(msg, attr);
+	int i;
+
+	if (!nl_modes)
+		goto nla_put_failure;
+
+	i = 0;
+	while (ifmodes) {
+		if (ifmodes & 1)
+			NLA_PUT_FLAG(msg, i);
+		ifmodes >>= 1;
+		i++;
+	}
+
+	nla_nest_end(msg, nl_modes);
+	return 0;
+
+nla_put_failure:
+	return -ENOBUFS;
+}
+
+static int nl80211_put_iface_combinations(struct wiphy *wiphy,
+					  struct sk_buff *msg)
+{
+	struct nlattr *nl_combis;
+	int i, j;
+
+	nl_combis = nla_nest_start(msg,
+				NL80211_ATTR_INTERFACE_COMBINATIONS);
+	if (!nl_combis)
+		goto nla_put_failure;
+
+	for (i = 0; i < wiphy->n_iface_combinations; i++) {
+		const struct ieee80211_iface_combination *c;
+		struct nlattr *nl_combi, *nl_limits;
+
+		c = &wiphy->iface_combinations[i];
+
+		nl_combi = nla_nest_start(msg, i + 1);
+		if (!nl_combi)
+			goto nla_put_failure;
+
+		nl_limits = nla_nest_start(msg, NL80211_IFACE_COMB_LIMITS);
+		if (!nl_limits)
+			goto nla_put_failure;
+
+		for (j = 0; j < c->n_limits; j++) {
+			struct nlattr *nl_limit;
+
+			nl_limit = nla_nest_start(msg, j + 1);
+			if (!nl_limit)
+				goto nla_put_failure;
+			NLA_PUT_U32(msg, NL80211_IFACE_LIMIT_MAX,
+				    c->limits[j].max);
+			if (nl80211_put_iftypes(msg, NL80211_IFACE_LIMIT_TYPES,
+						c->limits[j].types))
+				goto nla_put_failure;
+			nla_nest_end(msg, nl_limit);
+		}
+
+		nla_nest_end(msg, nl_limits);
+
+		if (c->beacon_int_infra_match)
+			NLA_PUT_FLAG(msg,
+				NL80211_IFACE_COMB_STA_AP_BI_MATCH);
+		NLA_PUT_U32(msg, NL80211_IFACE_COMB_NUM_CHANNELS,
+			    c->num_different_channels);
+		NLA_PUT_U32(msg, NL80211_IFACE_COMB_MAXNUM,
+			    c->max_interfaces);
+
+		nla_nest_end(msg, nl_combi);
+	}
+
+	nla_nest_end(msg, nl_combis);
+
+	return 0;
+nla_put_failure:
+	return -ENOBUFS;
+}
+
 static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 			      struct cfg80211_registered_device *dev)
 {
@@ -571,13 +653,11 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 	struct nlattr *nl_bands, *nl_band;
 	struct nlattr *nl_freqs, *nl_freq;
 	struct nlattr *nl_rates, *nl_rate;
-	struct nlattr *nl_modes;
 	struct nlattr *nl_cmds;
 	enum ieee80211_band band;
 	struct ieee80211_channel *chan;
 	struct ieee80211_rate *rate;
 	int i;
-	u16 ifmodes = dev->wiphy.interface_modes;
 	const struct ieee80211_txrx_stypes *mgmt_stypes =
 				dev->wiphy.mgmt_stypes;
 
@@ -637,20 +717,10 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 		}
 	}
 
-	nl_modes = nla_nest_start(msg, NL80211_ATTR_SUPPORTED_IFTYPES);
-	if (!nl_modes)
+	if (nl80211_put_iftypes(msg, NL80211_ATTR_SUPPORTED_IFTYPES,
+				dev->wiphy.interface_modes))
 		goto nla_put_failure;
 
-	i = 0;
-	while (ifmodes) {
-		if (ifmodes & 1)
-			NLA_PUT_FLAG(msg, i);
-		ifmodes >>= 1;
-		i++;
-	}
-
-	nla_nest_end(msg, nl_modes);
-
 	nl_bands = nla_nest_start(msg, NL80211_ATTR_WIPHY_BANDS);
 	if (!nl_bands)
 		goto nla_put_failure;
@@ -865,6 +935,13 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 		nla_nest_end(msg, nl_wowlan);
 	}
 
+	if (nl80211_put_iftypes(msg, NL80211_ATTR_SOFTWARE_IFTYPES,
+				dev->wiphy.software_iftypes))
+		goto nla_put_failure;
+
+	if (nl80211_put_iface_combinations(&dev->wiphy, msg))
+		goto nla_put_failure;
+
 	return genlmsg_end(msg, hdr);
 
  nla_put_failure:
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 414c9f604df..95e4e254da0 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -803,6 +803,11 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
 		return -EBUSY;
 
 	if (ntype != otype) {
+		err = cfg80211_can_change_interface(rdev, dev->ieee80211_ptr,
+						    ntype);
+		if (err)
+			return err;
+
 		dev->ieee80211_ptr->use_4addr = false;
 		dev->ieee80211_ptr->mesh_id_up_len = 0;
 
@@ -921,3 +926,78 @@ int cfg80211_validate_beacon_int(struct cfg80211_registered_device *rdev,
 
 	return res;
 }
+
+int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev,
+				  struct wireless_dev *wdev,
+				  enum nl80211_iftype iftype)
+{
+	struct wireless_dev *wdev_iter;
+	int num[NUM_NL80211_IFTYPES];
+	int total = 1;
+	int i, j;
+
+	ASSERT_RTNL();
+
+	/* Always allow software iftypes */
+	if (rdev->wiphy.software_iftypes & BIT(iftype))
+		return 0;
+
+	/*
+	 * Drivers will gradually all set this flag, until all
+	 * have it we only enforce for those that set it.
+	 */
+	if (!(rdev->wiphy.flags & WIPHY_FLAG_ENFORCE_COMBINATIONS))
+		return 0;
+
+	memset(num, 0, sizeof(num));
+
+	num[iftype] = 1;
+
+	mutex_lock(&rdev->devlist_mtx);
+	list_for_each_entry(wdev_iter, &rdev->netdev_list, list) {
+		if (wdev_iter == wdev)
+			continue;
+		if (!netif_running(wdev_iter->netdev))
+			continue;
+
+		if (rdev->wiphy.software_iftypes & BIT(wdev_iter->iftype))
+			continue;
+
+		num[wdev_iter->iftype]++;
+		total++;
+	}
+	mutex_unlock(&rdev->devlist_mtx);
+
+	for (i = 0; i < rdev->wiphy.n_iface_combinations; i++) {
+		const struct ieee80211_iface_combination *c;
+		struct ieee80211_iface_limit *limits;
+
+		c = &rdev->wiphy.iface_combinations[i];
+
+		limits = kmemdup(c->limits, sizeof(limits[0]) * c->n_limits,
+				 GFP_KERNEL);
+		if (!limits)
+			return -ENOMEM;
+		if (total > c->max_interfaces)
+			goto cont;
+
+		for (iftype = 0; iftype < NUM_NL80211_IFTYPES; iftype++) {
+			if (rdev->wiphy.software_iftypes & BIT(iftype))
+				continue;
+			for (j = 0; j < c->n_limits; j++) {
+				if (!(limits[j].types & iftype))
+					continue;
+				if (limits[j].max < num[iftype])
+					goto cont;
+				limits[j].max -= num[iftype];
+			}
+		}
+		/* yay, it fits */
+		kfree(limits);
+		return 0;
+ cont:
+		kfree(limits);
+	}
+
+	return -EBUSY;
+}
-- 
cgit v1.2.3


From ec034b208dc8aa5dc73ec46c3f27e34c5efbf113 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 13 May 2011 13:35:40 +0200
Subject: mac80211: fix TX a-MPDU locking

During my quest to make mac80211 not have any RCU
warnings from sparse, I came across the a-MPDU code
again and it wasn't quite clear why it isn't racy.
So instead of assigning the tid_tx array with just
the spinlock held in ieee80211_start_tx_ba_session
use a separate temporary array protected only by
the spinlock and protect all assignments to the
"live" array by both the spinlock and the mutex so
that other code is easily verified to be correct.

Due to pointer assignment atomicity I don't think
this is a real issue, but I'm not sure, especially
on Alpha the current code might be problematic.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/agg-tx.c   | 23 +++++++++++++++++------
 net/mac80211/ht.c       | 27 +++++++++++++++++++++------
 net/mac80211/sta_info.h |  4 ++++
 3 files changed, 42 insertions(+), 12 deletions(-)

diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index 63d852cb4ca..f614ee60208 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -136,6 +136,14 @@ void ieee80211_send_bar(struct ieee80211_sub_if_data *sdata, u8 *ra, u16 tid, u1
 	ieee80211_tx_skb(sdata, skb);
 }
 
+void ieee80211_assign_tid_tx(struct sta_info *sta, int tid,
+			     struct tid_ampdu_tx *tid_tx)
+{
+	lockdep_assert_held(&sta->ampdu_mlme.mtx);
+	lockdep_assert_held(&sta->lock);
+	rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], tid_tx);
+}
+
 static void kfree_tid_tx(struct rcu_head *rcu_head)
 {
 	struct tid_ampdu_tx *tid_tx =
@@ -161,7 +169,7 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
 
 	if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state)) {
 		/* not even started yet! */
-		rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], NULL);
+		ieee80211_assign_tid_tx(sta, tid, NULL);
 		spin_unlock_bh(&sta->lock);
 		call_rcu(&tid_tx->rcu_head, kfree_tid_tx);
 		return 0;
@@ -318,7 +326,7 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
 					" tid %d\n", tid);
 #endif
 		spin_lock_bh(&sta->lock);
-		rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], NULL);
+		ieee80211_assign_tid_tx(sta, tid, NULL);
 		spin_unlock_bh(&sta->lock);
 
 		ieee80211_wake_queue_agg(local, tid);
@@ -398,7 +406,7 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid,
 
 	tid_tx = sta->ampdu_mlme.tid_tx[tid];
 	/* check if the TID is not in aggregation flow already */
-	if (tid_tx) {
+	if (tid_tx || sta->ampdu_mlme.tid_start_tx[tid]) {
 #ifdef CONFIG_MAC80211_HT_DEBUG
 		printk(KERN_DEBUG "BA request denied - session is not "
 				 "idle on tid %u\n", tid);
@@ -433,8 +441,11 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid,
 	sta->ampdu_mlme.dialog_token_allocator++;
 	tid_tx->dialog_token = sta->ampdu_mlme.dialog_token_allocator;
 
-	/* finally, assign it to the array */
-	rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], tid_tx);
+	/*
+	 * Finally, assign it to the start array; the work item will
+	 * collect it and move it to the normal array.
+	 */
+	sta->ampdu_mlme.tid_start_tx[tid] = tid_tx;
 
 	ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work);
 
@@ -697,7 +708,7 @@ void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid)
 	ieee80211_agg_splice_packets(local, tid_tx, tid);
 
 	/* future packets must not find the tid_tx struct any more */
-	rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], NULL);
+	ieee80211_assign_tid_tx(sta, tid, NULL);
 
 	ieee80211_agg_splice_finish(local, tid);
 
diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c
index b9e4b9bd217..9f5842a4311 100644
--- a/net/mac80211/ht.c
+++ b/net/mac80211/ht.c
@@ -140,14 +140,29 @@ void ieee80211_ba_session_work(struct work_struct *work)
 				sta, tid, WLAN_BACK_RECIPIENT,
 				WLAN_REASON_QSTA_TIMEOUT, true);
 
-		tid_tx = sta->ampdu_mlme.tid_tx[tid];
-		if (!tid_tx)
-			continue;
+		tid_tx = sta->ampdu_mlme.tid_start_tx[tid];
+		if (tid_tx) {
+			/*
+			 * Assign it over to the normal tid_tx array
+			 * where it "goes live".
+			 */
+			spin_lock_bh(&sta->lock);
+
+			sta->ampdu_mlme.tid_start_tx[tid] = NULL;
+			/* could there be a race? */
+			if (sta->ampdu_mlme.tid_tx[tid])
+				kfree(tid_tx);
+			else
+				ieee80211_assign_tid_tx(sta, tid, tid_tx);
+			spin_unlock_bh(&sta->lock);
 
-		if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state))
 			ieee80211_tx_ba_session_handle_start(sta, tid);
-		else if (test_and_clear_bit(HT_AGG_STATE_WANT_STOP,
-					    &tid_tx->state))
+			continue;
+		}
+
+		tid_tx = sta->ampdu_mlme.tid_tx[tid];
+		if (tid_tx && test_and_clear_bit(HT_AGG_STATE_WANT_STOP,
+						 &tid_tx->state))
 			___ieee80211_stop_tx_ba_session(sta, tid,
 							WLAN_BACK_INITIATOR,
 							true);
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index f00b4dcb49d..55c51855ceb 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -152,6 +152,7 @@ struct tid_ampdu_rx {
  *
  * @tid_rx: aggregation info for Rx per TID -- RCU protected
  * @tid_tx: aggregation info for Tx per TID
+ * @tid_start_tx: sessions where start was requested
  * @addba_req_num: number of times addBA request has been sent.
  * @dialog_token_allocator: dialog token enumerator for each new session;
  * @work: work struct for starting/stopping aggregation
@@ -168,6 +169,7 @@ struct sta_ampdu_mlme {
 	/* tx */
 	struct work_struct work;
 	struct tid_ampdu_tx *tid_tx[STA_TID_NUM];
+	struct tid_ampdu_tx *tid_start_tx[STA_TID_NUM];
 	u8 addba_req_num[STA_TID_NUM];
 	u8 dialog_token_allocator;
 };
@@ -398,6 +400,8 @@ static inline u32 get_sta_flags(struct sta_info *sta)
 	return ret;
 }
 
+void ieee80211_assign_tid_tx(struct sta_info *sta, int tid,
+			     struct tid_ampdu_tx *tid_tx);
 
 
 #define STA_HASH_SIZE 256
-- 
cgit v1.2.3


From 40b275b69ee660274b77fb612b0db31fd282fc3f Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 13 May 2011 14:15:49 +0200
Subject: mac80211: sparse RCU annotations

This adds sparse RCU annotations to most of
mac80211, only the mesh code remains to be
done.

Due the the previous patches, the annotations
are pretty simple. The only thing that this
actually changes is removing the RCU usage of
key->sta in debugfs since this pointer isn't
actually an RCU-managed pointer (it only has
a single assignment done before the key even
goes live). As that is otherwise harmless, I
decided to make it part of this patch.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/agg-rx.c      |  3 ++-
 net/mac80211/agg-tx.c      | 36 +++++++++++++++++++++---------------
 net/mac80211/cfg.c         | 17 +++++++----------
 net/mac80211/debugfs_key.c | 21 +++++++++------------
 net/mac80211/ht.c          |  2 +-
 net/mac80211/ibss.c        | 11 ++++++++---
 net/mac80211/ieee80211_i.h | 16 +++++++++-------
 net/mac80211/iface.c       |  3 ++-
 net/mac80211/key.c         | 22 ++++++++++++++--------
 net/mac80211/key.h         |  3 +++
 net/mac80211/main.c        |  2 ++
 net/mac80211/mesh.h        |  2 +-
 net/mac80211/mesh_hwmp.c   | 20 +++++++++++++++++---
 net/mac80211/sta_info.c    | 15 +++++++++------
 net/mac80211/sta_info.h    | 17 ++++++++++++-----
 net/mac80211/tx.c          |  2 +-
 16 files changed, 118 insertions(+), 74 deletions(-)

diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c
index 0c9d0c07eae..9c0d76cdca9 100644
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -63,7 +63,8 @@ void ___ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid,
 
 	lockdep_assert_held(&sta->ampdu_mlme.mtx);
 
-	tid_rx = sta->ampdu_mlme.tid_rx[tid];
+	tid_rx = rcu_dereference_protected(sta->ampdu_mlme.tid_rx[tid],
+					lockdep_is_held(&sta->ampdu_mlme.mtx));
 
 	if (!tid_rx)
 		return;
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index f614ee60208..cd5125f77cc 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -157,16 +157,19 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
 				    bool tx)
 {
 	struct ieee80211_local *local = sta->local;
-	struct tid_ampdu_tx *tid_tx = sta->ampdu_mlme.tid_tx[tid];
+	struct tid_ampdu_tx *tid_tx;
 	int ret;
 
 	lockdep_assert_held(&sta->ampdu_mlme.mtx);
 
-	if (!tid_tx)
-		return -ENOENT;
-
 	spin_lock_bh(&sta->lock);
 
+	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
+	if (!tid_tx) {
+		spin_unlock_bh(&sta->lock);
+		return -ENOENT;
+	}
+
 	if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state)) {
 		/* not even started yet! */
 		ieee80211_assign_tid_tx(sta, tid, NULL);
@@ -291,13 +294,13 @@ ieee80211_wake_queue_agg(struct ieee80211_local *local, int tid)
 
 void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
 {
-	struct tid_ampdu_tx *tid_tx = sta->ampdu_mlme.tid_tx[tid];
+	struct tid_ampdu_tx *tid_tx;
 	struct ieee80211_local *local = sta->local;
 	struct ieee80211_sub_if_data *sdata = sta->sdata;
 	u16 start_seq_num;
 	int ret;
 
-	lockdep_assert_held(&sta->ampdu_mlme.mtx);
+	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
 
 	/*
 	 * While we're asking the driver about the aggregation,
@@ -404,7 +407,7 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid,
 		goto err_unlock_sta;
 	}
 
-	tid_tx = sta->ampdu_mlme.tid_tx[tid];
+	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
 	/* check if the TID is not in aggregation flow already */
 	if (tid_tx || sta->ampdu_mlme.tid_start_tx[tid]) {
 #ifdef CONFIG_MAC80211_HT_DEBUG
@@ -491,16 +494,19 @@ ieee80211_agg_splice_finish(struct ieee80211_local *local, u16 tid)
 static void ieee80211_agg_tx_operational(struct ieee80211_local *local,
 					 struct sta_info *sta, u16 tid)
 {
+	struct tid_ampdu_tx *tid_tx;
+
 	lockdep_assert_held(&sta->ampdu_mlme.mtx);
 
+	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
+
 #ifdef CONFIG_MAC80211_HT_DEBUG
 	printk(KERN_DEBUG "Aggregation is on for tid %d\n", tid);
 #endif
 
 	drv_ampdu_action(local, sta->sdata,
 			 IEEE80211_AMPDU_TX_OPERATIONAL,
-			 &sta->sta, tid, NULL,
-			 sta->ampdu_mlme.tid_tx[tid]->buf_size);
+			 &sta->sta, tid, NULL, tid_tx->buf_size);
 
 	/*
 	 * synchronize with TX path, while splicing the TX path
@@ -508,13 +514,13 @@ static void ieee80211_agg_tx_operational(struct ieee80211_local *local,
 	 */
 	spin_lock_bh(&sta->lock);
 
-	ieee80211_agg_splice_packets(local, sta->ampdu_mlme.tid_tx[tid], tid);
+	ieee80211_agg_splice_packets(local, tid_tx, tid);
 	/*
 	 * Now mark as operational. This will be visible
 	 * in the TX path, and lets it go lock-free in
 	 * the common case.
 	 */
-	set_bit(HT_AGG_STATE_OPERATIONAL, &sta->ampdu_mlme.tid_tx[tid]->state);
+	set_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state);
 	ieee80211_agg_splice_finish(local, tid);
 
 	spin_unlock_bh(&sta->lock);
@@ -548,7 +554,7 @@ void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid)
 	}
 
 	mutex_lock(&sta->ampdu_mlme.mtx);
-	tid_tx = sta->ampdu_mlme.tid_tx[tid];
+	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
 
 	if (WARN_ON(!tid_tx)) {
 #ifdef CONFIG_MAC80211_HT_DEBUG
@@ -626,7 +632,7 @@ int ieee80211_stop_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid)
 		return -EINVAL;
 
 	spin_lock_bh(&sta->lock);
-	tid_tx = sta->ampdu_mlme.tid_tx[tid];
+	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
 
 	if (!tid_tx) {
 		ret = -ENOENT;
@@ -682,7 +688,7 @@ void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid)
 
 	mutex_lock(&sta->ampdu_mlme.mtx);
 	spin_lock_bh(&sta->lock);
-	tid_tx = sta->ampdu_mlme.tid_tx[tid];
+	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
 
 	if (!tid_tx || !test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
 #ifdef CONFIG_MAC80211_HT_DEBUG
@@ -763,7 +769,7 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local,
 
 	mutex_lock(&sta->ampdu_mlme.mtx);
 
-	tid_tx = sta->ampdu_mlme.tid_tx[tid];
+	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
 	if (!tid_tx)
 		goto out;
 
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 2d1c1a5f3c5..6ecd5862735 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -177,11 +177,11 @@ static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev,
 			goto out_unlock;
 
 		if (pairwise)
-			key = sta->ptk;
+			key = key_mtx_dereference(local, sta->ptk);
 		else
-			key = sta->gtk[key_idx];
+			key = key_mtx_dereference(local, sta->gtk[key_idx]);
 	} else
-		key = sdata->keys[key_idx];
+		key = key_mtx_dereference(local, sdata->keys[key_idx]);
 
 	if (!key) {
 		ret = -ENOENT;
@@ -463,7 +463,7 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata,
 	int size;
 	int err = -EINVAL;
 
-	old = sdata->u.ap.beacon;
+	old = rtnl_dereference(sdata->u.ap.beacon);
 
 	/* head must not be zero-length */
 	if (params->head && !params->head_len)
@@ -558,8 +558,7 @@ static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev,
 
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
-	old = sdata->u.ap.beacon;
-
+	old = rtnl_dereference(sdata->u.ap.beacon);
 	if (old)
 		return -EALREADY;
 
@@ -574,8 +573,7 @@ static int ieee80211_set_beacon(struct wiphy *wiphy, struct net_device *dev,
 
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
-	old = sdata->u.ap.beacon;
-
+	old = rtnl_dereference(sdata->u.ap.beacon);
 	if (!old)
 		return -ENOENT;
 
@@ -589,8 +587,7 @@ static int ieee80211_del_beacon(struct wiphy *wiphy, struct net_device *dev)
 
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
-	old = sdata->u.ap.beacon;
-
+	old = rtnl_dereference(sdata->u.ap.beacon);
 	if (!old)
 		return -ENOENT;
 
diff --git a/net/mac80211/debugfs_key.c b/net/mac80211/debugfs_key.c
index f7ef3477c24..33c58b85c91 100644
--- a/net/mac80211/debugfs_key.c
+++ b/net/mac80211/debugfs_key.c
@@ -241,16 +241,12 @@ void ieee80211_debugfs_key_add(struct ieee80211_key *key)
 	if (!key->debugfs.dir)
 		return;
 
-	rcu_read_lock();
-	sta = rcu_dereference(key->sta);
-	if (sta)
+	sta = key->sta;
+	if (sta) {
 		sprintf(buf, "../../stations/%pM", sta->sta.addr);
-	rcu_read_unlock();
-
-	/* using sta as a boolean is fine outside RCU lock */
-	if (sta)
 		key->debugfs.stalink =
 			debugfs_create_symlink("station", key->debugfs.dir, buf);
+	}
 
 	DEBUGFS_ADD(keylen);
 	DEBUGFS_ADD(flags);
@@ -286,7 +282,8 @@ void ieee80211_debugfs_key_update_default(struct ieee80211_sub_if_data *sdata)
 	lockdep_assert_held(&sdata->local->key_mtx);
 
 	if (sdata->default_unicast_key) {
-		key = sdata->default_unicast_key;
+		key = key_mtx_dereference(sdata->local,
+					  sdata->default_unicast_key);
 		sprintf(buf, "../keys/%d", key->debugfs.cnt);
 		sdata->debugfs.default_unicast_key =
 			debugfs_create_symlink("default_unicast_key",
@@ -297,7 +294,8 @@ void ieee80211_debugfs_key_update_default(struct ieee80211_sub_if_data *sdata)
 	}
 
 	if (sdata->default_multicast_key) {
-		key = sdata->default_multicast_key;
+		key = key_mtx_dereference(sdata->local,
+					  sdata->default_multicast_key);
 		sprintf(buf, "../keys/%d", key->debugfs.cnt);
 		sdata->debugfs.default_multicast_key =
 			debugfs_create_symlink("default_multicast_key",
@@ -316,9 +314,8 @@ void ieee80211_debugfs_key_add_mgmt_default(struct ieee80211_sub_if_data *sdata)
 	if (!sdata->debugfs.dir)
 		return;
 
-	/* this is running under the key lock */
-
-	key = sdata->default_mgmt_key;
+	key = key_mtx_dereference(sdata->local,
+				  sdata->default_mgmt_key);
 	if (key) {
 		sprintf(buf, "../keys/%d", key->debugfs.cnt);
 		sdata->debugfs.default_mgmt_key =
diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c
index 9f5842a4311..591add22bcc 100644
--- a/net/mac80211/ht.c
+++ b/net/mac80211/ht.c
@@ -160,7 +160,7 @@ void ieee80211_ba_session_work(struct work_struct *work)
 			continue;
 		}
 
-		tid_tx = sta->ampdu_mlme.tid_tx[tid];
+		tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
 		if (tid_tx && test_and_clear_bit(HT_AGG_STATE_WANT_STOP,
 						 &tid_tx->state))
 			___ieee80211_stop_tx_ba_session(sta, tid,
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index b81860c9469..421eaa6b0c2 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -662,12 +662,16 @@ static void ieee80211_rx_mgmt_probe_req(struct ieee80211_sub_if_data *sdata,
 	int tx_last_beacon, len = req->len;
 	struct sk_buff *skb;
 	struct ieee80211_mgmt *resp;
+	struct sk_buff *presp;
 	u8 *pos, *end;
 
 	lockdep_assert_held(&ifibss->mtx);
 
+	presp = rcu_dereference_protected(ifibss->presp,
+					  lockdep_is_held(&ifibss->mtx));
+
 	if (ifibss->state != IEEE80211_IBSS_MLME_JOINED ||
-	    len < 24 + 2 || !ifibss->presp)
+	    len < 24 + 2 || !presp)
 		return;
 
 	tx_last_beacon = drv_tx_last_beacon(local);
@@ -705,7 +709,7 @@ static void ieee80211_rx_mgmt_probe_req(struct ieee80211_sub_if_data *sdata,
 	}
 
 	/* Reply with ProbeResp */
-	skb = skb_copy(ifibss->presp, GFP_KERNEL);
+	skb = skb_copy(presp, GFP_KERNEL);
 	if (!skb)
 		return;
 
@@ -985,7 +989,8 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata)
 
 	/* remove beacon */
 	kfree(sdata->u.ibss.ie);
-	skb = sdata->u.ibss.presp;
+	skb = rcu_dereference_protected(sdata->u.ibss.presp,
+					lockdep_is_held(&sdata->u.ibss.mtx));
 	rcu_assign_pointer(sdata->u.ibss.presp, NULL);
 	sdata->vif.bss_conf.ibss_joined = false;
 	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED |
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 82f90ff8bb1..ed755889645 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -214,7 +214,7 @@ struct beacon_data {
 };
 
 struct ieee80211_if_ap {
-	struct beacon_data *beacon;
+	struct beacon_data __rcu *beacon;
 
 	struct list_head vlans;
 
@@ -237,7 +237,7 @@ struct ieee80211_if_vlan {
 	struct list_head list;
 
 	/* used for all tx if the VLAN is configured to 4-addr mode */
-	struct sta_info *sta;
+	struct sta_info __rcu *sta;
 };
 
 struct mesh_stats {
@@ -442,7 +442,8 @@ struct ieee80211_if_ibss {
 
 	unsigned long ibss_join_req;
 	/* probe response/beacon for IBSS */
-	struct sk_buff *presp, *skb;
+	struct sk_buff __rcu *presp;
+	struct sk_buff *skb;
 
 	enum {
 		IEEE80211_IBSS_MLME_SEARCH,
@@ -567,9 +568,10 @@ struct ieee80211_sub_if_data {
 	struct ieee80211_fragment_entry	fragments[IEEE80211_FRAGMENT_MAX];
 	unsigned int fragment_next;
 
-	struct ieee80211_key *keys[NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS];
-	struct ieee80211_key *default_unicast_key, *default_multicast_key;
-	struct ieee80211_key *default_mgmt_key;
+	struct ieee80211_key __rcu *keys[NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS];
+	struct ieee80211_key __rcu *default_unicast_key;
+	struct ieee80211_key __rcu *default_multicast_key;
+	struct ieee80211_key __rcu *default_mgmt_key;
 
 	u16 sequence_number;
 	__be16 control_port_protocol;
@@ -805,7 +807,7 @@ struct ieee80211_local {
 	spinlock_t sta_lock;
 	unsigned long num_sta;
 	struct list_head sta_list, sta_pending_list;
-	struct sta_info *sta_hash[STA_HASH_SIZE];
+	struct sta_info __rcu *sta_hash[STA_HASH_SIZE];
 	struct timer_list sta_cleanup;
 	struct work_struct sta_finish_work;
 	int sta_generation;
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 4054399be90..0d00ac93d95 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -449,7 +449,8 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
 	/* APs need special treatment */
 	if (sdata->vif.type == NL80211_IFTYPE_AP) {
 		struct ieee80211_sub_if_data *vlan, *tmpsdata;
-		struct beacon_data *old_beacon = sdata->u.ap.beacon;
+		struct beacon_data *old_beacon =
+			rtnl_dereference(sdata->u.ap.beacon);
 
 		/* sdata_running will return false, so this will disable */
 		ieee80211_bss_info_change_notify(sdata,
diff --git a/net/mac80211/key.c b/net/mac80211/key.c
index 958832dd4f0..31afd712930 100644
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -195,7 +195,7 @@ static void __ieee80211_set_default_key(struct ieee80211_sub_if_data *sdata,
 	assert_key_lock(sdata->local);
 
 	if (idx >= 0 && idx < NUM_DEFAULT_KEYS)
-		key = sdata->keys[idx];
+		key = key_mtx_dereference(sdata->local, sdata->keys[idx]);
 
 	if (uni)
 		rcu_assign_pointer(sdata->default_unicast_key, key);
@@ -222,7 +222,7 @@ __ieee80211_set_default_mgmt_key(struct ieee80211_sub_if_data *sdata, int idx)
 
 	if (idx >= NUM_DEFAULT_KEYS &&
 	    idx < NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS)
-		key = sdata->keys[idx];
+		key = key_mtx_dereference(sdata->local, sdata->keys[idx]);
 
 	rcu_assign_pointer(sdata->default_mgmt_key, key);
 
@@ -266,9 +266,15 @@ static void __ieee80211_key_replace(struct ieee80211_sub_if_data *sdata,
 		else
 			idx = new->conf.keyidx;
 
-		defunikey = old && sdata->default_unicast_key == old;
-		defmultikey = old && sdata->default_multicast_key == old;
-		defmgmtkey = old && sdata->default_mgmt_key == old;
+		defunikey = old &&
+			old == key_mtx_dereference(sdata->local,
+						sdata->default_unicast_key);
+		defmultikey = old &&
+			old == key_mtx_dereference(sdata->local,
+						sdata->default_multicast_key);
+		defmgmtkey = old &&
+			old == key_mtx_dereference(sdata->local,
+						sdata->default_mgmt_key);
 
 		if (defunikey && !new)
 			__ieee80211_set_default_key(sdata, -1, true, false);
@@ -451,11 +457,11 @@ int ieee80211_key_link(struct ieee80211_key *key,
 	mutex_lock(&sdata->local->key_mtx);
 
 	if (sta && pairwise)
-		old_key = sta->ptk;
+		old_key = key_mtx_dereference(sdata->local, sta->ptk);
 	else if (sta)
-		old_key = sta->gtk[idx];
+		old_key = key_mtx_dereference(sdata->local, sta->gtk[idx]);
 	else
-		old_key = sdata->keys[idx];
+		old_key = key_mtx_dereference(sdata->local, sdata->keys[idx]);
 
 	__ieee80211_key_replace(sdata, sta, pairwise, old_key, key);
 	__ieee80211_key_destroy(old_key);
diff --git a/net/mac80211/key.h b/net/mac80211/key.h
index e5432ef8b20..d801d535133 100644
--- a/net/mac80211/key.h
+++ b/net/mac80211/key.h
@@ -146,4 +146,7 @@ void ieee80211_free_keys(struct ieee80211_sub_if_data *sdata);
 void ieee80211_enable_keys(struct ieee80211_sub_if_data *sdata);
 void ieee80211_disable_keys(struct ieee80211_sub_if_data *sdata);
 
+#define key_mtx_dereference(local, ref) \
+	rcu_dereference_protected(ref, lockdep_is_held(&((local)->key_mtx)))
+
 #endif /* IEEE80211_KEY_H */
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 79a2281678b..0d7b08db8e5 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -871,8 +871,10 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 	 * and we need some headroom for passing the frame to monitor
 	 * interfaces, but never both at the same time.
 	 */
+#ifndef __CHECKER__
 	BUILD_BUG_ON(IEEE80211_TX_STATUS_HEADROOM !=
 			sizeof(struct ieee80211_tx_status_rtap_hdr));
+#endif
 	local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom,
 				   sizeof(struct ieee80211_tx_status_rtap_hdr));
 
diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index 5c0c20389a1..e7c5fddb480 100644
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -92,7 +92,7 @@ struct mesh_path {
 	u8 dst[ETH_ALEN];
 	u8 mpp[ETH_ALEN];	/* used for MPP or MAP */
 	struct ieee80211_sub_if_data *sdata;
-	struct sta_info *next_hop;
+	struct sta_info __rcu *next_hop;
 	struct timer_list timer;
 	struct sk_buff_head frame_queue;
 	struct rcu_head rcu;
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 2aec7c4f357..2b18053070c 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -560,6 +560,14 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata,
 }
 
 
+static inline struct sta_info *
+next_hop_deref_protected(struct mesh_path *mpath)
+{
+	return rcu_dereference_protected(mpath->next_hop,
+					 lockdep_is_held(&mpath->state_lock));
+}
+
+
 static void hwmp_prep_frame_process(struct ieee80211_sub_if_data *sdata,
 				    struct ieee80211_mgmt *mgmt,
 				    u8 *prep_elem, u32 metric)
@@ -599,7 +607,7 @@ static void hwmp_prep_frame_process(struct ieee80211_sub_if_data *sdata,
 		spin_unlock_bh(&mpath->state_lock);
 		goto fail;
 	}
-	memcpy(next_hop, mpath->next_hop->sta.addr, ETH_ALEN);
+	memcpy(next_hop, next_hop_deref_protected(mpath)->sta.addr, ETH_ALEN);
 	spin_unlock_bh(&mpath->state_lock);
 	--ttl;
 	flags = PREP_IE_FLAGS(prep_elem);
@@ -651,7 +659,8 @@ static void hwmp_perr_frame_process(struct ieee80211_sub_if_data *sdata,
 	if (mpath) {
 		spin_lock_bh(&mpath->state_lock);
 		if (mpath->flags & MESH_PATH_ACTIVE &&
-		    memcmp(ta, mpath->next_hop->sta.addr, ETH_ALEN) == 0 &&
+		    memcmp(ta, next_hop_deref_protected(mpath)->sta.addr,
+							ETH_ALEN) == 0 &&
 		    (!(mpath->flags & MESH_PATH_SN_VALID) ||
 		    SN_GT(target_sn, mpath->sn))) {
 			mpath->flags &= ~MESH_PATH_ACTIVE;
@@ -913,6 +922,7 @@ int mesh_nexthop_lookup(struct sk_buff *skb,
 {
 	struct sk_buff *skb_to_free = NULL;
 	struct mesh_path *mpath;
+	struct sta_info *next_hop;
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 	u8 *target_addr = hdr->addr3;
 	int err = 0;
@@ -940,7 +950,11 @@ int mesh_nexthop_lookup(struct sk_buff *skb,
 			mesh_queue_preq(mpath,
 					PREQ_Q_F_START | PREQ_Q_F_REFRESH);
 		}
-		memcpy(hdr->addr1, mpath->next_hop->sta.addr, ETH_ALEN);
+		next_hop = rcu_dereference(mpath->next_hop);
+		if (next_hop)
+			memcpy(hdr->addr1, next_hop->sta.addr, ETH_ALEN);
+		else
+			err = -ENOENT;
 	} else {
 		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 		if (!(mpath->flags & MESH_PATH_RESOLVING)) {
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index cba8309e9ac..82ab6b4643f 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -67,7 +67,8 @@ static int sta_info_hash_del(struct ieee80211_local *local,
 {
 	struct sta_info *s;
 
-	s = local->sta_hash[STA_HASH(sta->sta.addr)];
+	s = rcu_dereference_protected(local->sta_hash[STA_HASH(sta->sta.addr)],
+				      lockdep_is_held(&local->sta_lock));
 	if (!s)
 		return -ENOENT;
 	if (s == sta) {
@@ -76,9 +77,11 @@ static int sta_info_hash_del(struct ieee80211_local *local,
 		return 0;
 	}
 
-	while (s->hnext && s->hnext != sta)
-		s = s->hnext;
-	if (s->hnext) {
+	while (rcu_access_pointer(s->hnext) &&
+	       rcu_access_pointer(s->hnext) != sta)
+		s = rcu_dereference_protected(s->hnext,
+					lockdep_is_held(&local->sta_lock));
+	if (rcu_access_pointer(s->hnext)) {
 		rcu_assign_pointer(s->hnext, sta->hnext);
 		return 0;
 	}
@@ -654,9 +657,9 @@ static int __must_check __sta_info_destroy(struct sta_info *sta)
 
 	mutex_lock(&local->key_mtx);
 	for (i = 0; i < NUM_DEFAULT_KEYS; i++)
-		__ieee80211_key_free(sta->gtk[i]);
+		__ieee80211_key_free(key_mtx_dereference(local, sta->gtk[i]));
 	if (sta->ptk)
-		__ieee80211_key_free(sta->ptk);
+		__ieee80211_key_free(key_mtx_dereference(local, sta->ptk));
 	mutex_unlock(&local->key_mtx);
 
 	sta->dead = true;
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index 55c51855ceb..d6b566076f0 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -164,11 +164,11 @@ struct tid_ampdu_rx {
 struct sta_ampdu_mlme {
 	struct mutex mtx;
 	/* rx */
-	struct tid_ampdu_rx *tid_rx[STA_TID_NUM];
+	struct tid_ampdu_rx __rcu *tid_rx[STA_TID_NUM];
 	unsigned long tid_rx_timer_expired[BITS_TO_LONGS(STA_TID_NUM)];
 	/* tx */
 	struct work_struct work;
-	struct tid_ampdu_tx *tid_tx[STA_TID_NUM];
+	struct tid_ampdu_tx __rcu *tid_tx[STA_TID_NUM];
 	struct tid_ampdu_tx *tid_start_tx[STA_TID_NUM];
 	u8 addba_req_num[STA_TID_NUM];
 	u8 dialog_token_allocator;
@@ -243,11 +243,11 @@ struct sta_ampdu_mlme {
 struct sta_info {
 	/* General information, mostly static */
 	struct list_head list;
-	struct sta_info *hnext;
+	struct sta_info __rcu *hnext;
 	struct ieee80211_local *local;
 	struct ieee80211_sub_if_data *sdata;
-	struct ieee80211_key *gtk[NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS];
-	struct ieee80211_key *ptk;
+	struct ieee80211_key __rcu *gtk[NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS];
+	struct ieee80211_key __rcu *ptk;
 	struct rate_control_ref *rate_ctrl;
 	void *rate_ctrl_priv;
 	spinlock_t lock;
@@ -403,6 +403,13 @@ static inline u32 get_sta_flags(struct sta_info *sta)
 void ieee80211_assign_tid_tx(struct sta_info *sta, int tid,
 			     struct tid_ampdu_tx *tid_tx);
 
+static inline struct tid_ampdu_tx *
+rcu_dereference_protected_tid_tx(struct sta_info *sta, int tid)
+{
+	return rcu_dereference_protected(sta->ampdu_mlme.tid_tx[tid],
+					 lockdep_is_held(&sta->lock) ||
+					 lockdep_is_held(&sta->ampdu_mlme.mtx));
+}
 
 #define STA_HASH_SIZE 256
 #define STA_HASH(sta) (sta[5])
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index c9f12113ca6..6eeaaa2bbaf 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1147,7 +1147,7 @@ static bool ieee80211_tx_prep_agg(struct ieee80211_tx_data *tx,
 		 *     packet pass through because splicing the frames
 		 *     back is already done.
 		 */
-		tid_tx = tx->sta->ampdu_mlme.tid_tx[tid];
+		tid_tx = rcu_dereference_protected_tid_tx(tx->sta, tid);
 
 		if (!tid_tx) {
 			/* do nothing, let packet pass through */
-- 
cgit v1.2.3


From bd2281b85d929af0bd192f05135f70dd05f4fd85 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Fri, 13 May 2011 15:52:10 +0200
Subject: net/rfkill/core.c: Avoid leaving freed data in a list

The list_for_each_entry loop can fail, in which case the list element is
not removed from the list rfkill_fds.  Since this list is not accessed by
the loop, the addition of &data->list into the list is just moved after the
loop.

The sematic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression E,E1,E2;
identifier l;
@@

*list_add(&E->l,E1);
... when != E1
    when != list_del(&E->l)
    when != list_del_init(&E->l)
    when != E = E2
*kfree(E);// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/rfkill/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/rfkill/core.c b/net/rfkill/core.c
index 0198191b756..be90640a277 100644
--- a/net/rfkill/core.c
+++ b/net/rfkill/core.c
@@ -1024,7 +1024,6 @@ static int rfkill_fop_open(struct inode *inode, struct file *file)
 	 * start getting events from elsewhere but hold mtx to get
 	 * startup events added first
 	 */
-	list_add(&data->list, &rfkill_fds);
 
 	list_for_each_entry(rfkill, &rfkill_list, node) {
 		ev = kzalloc(sizeof(*ev), GFP_KERNEL);
@@ -1033,6 +1032,7 @@ static int rfkill_fop_open(struct inode *inode, struct file *file)
 		rfkill_fill_event(&ev->ev, rfkill, RFKILL_OP_ADD);
 		list_add_tail(&ev->list, &data->events);
 	}
+	list_add(&data->list, &rfkill_fds);
 	mutex_unlock(&data->mtx);
 	mutex_unlock(&rfkill_global_mutex);
 
-- 
cgit v1.2.3


From 69de3721750ea4fae504be9e67f140cafe1c7a89 Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Date: Fri, 13 May 2011 20:29:04 +0530
Subject: ath9k_hw: make antenna diversity modules chip specific

this is necessary to support Antenna diversity and combining in new chip
sets such as AR9485, previously Antenna diversity support is available
only in AR9285

Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com>
Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com>
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9002_phy.c | 42 +++++++++++++++--------------
 drivers/net/wireless/ath/ath9k/hw-ops.h     | 12 +++++++++
 drivers/net/wireless/ath/ath9k/hw.h         |  9 ++++---
 3 files changed, 39 insertions(+), 24 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
index 7d68d61e406..b4a0c1d3b11 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
@@ -517,23 +517,7 @@ static void ar9002_hw_set_nf_limits(struct ath_hw *ah)
 	}
 }
 
-void ar9002_hw_attach_phy_ops(struct ath_hw *ah)
-{
-	struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
-
-	priv_ops->set_rf_regs = NULL;
-	priv_ops->rf_alloc_ext_banks = NULL;
-	priv_ops->rf_free_ext_banks = NULL;
-	priv_ops->rf_set_freq = ar9002_hw_set_channel;
-	priv_ops->spur_mitigate_freq = ar9002_hw_spur_mitigate;
-	priv_ops->olc_init = ar9002_olc_init;
-	priv_ops->compute_pll_control = ar9002_hw_compute_pll_control;
-	priv_ops->do_getnf = ar9002_hw_do_getnf;
-
-	ar9002_hw_set_nf_limits(ah);
-}
-
-void ath9k_hw_antdiv_comb_conf_get(struct ath_hw *ah,
+static void ar9002_hw_antdiv_comb_conf_get(struct ath_hw *ah,
 				   struct ath_hw_antcomb_conf *antconf)
 {
 	u32 regval;
@@ -546,9 +530,8 @@ void ath9k_hw_antdiv_comb_conf_get(struct ath_hw *ah,
 	antconf->fast_div_bias = (regval & AR_PHY_9285_FAST_DIV_BIAS) >>
 				  AR_PHY_9285_FAST_DIV_BIAS_S;
 }
-EXPORT_SYMBOL(ath9k_hw_antdiv_comb_conf_get);
 
-void ath9k_hw_antdiv_comb_conf_set(struct ath_hw *ah,
+static void ar9002_hw_antdiv_comb_conf_set(struct ath_hw *ah,
 				   struct ath_hw_antcomb_conf *antconf)
 {
 	u32 regval;
@@ -566,4 +549,23 @@ void ath9k_hw_antdiv_comb_conf_set(struct ath_hw *ah,
 
 	REG_WRITE(ah, AR_PHY_MULTICHAIN_GAIN_CTL, regval);
 }
-EXPORT_SYMBOL(ath9k_hw_antdiv_comb_conf_set);
+
+void ar9002_hw_attach_phy_ops(struct ath_hw *ah)
+{
+	struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
+	struct ath_hw_ops *ops = ath9k_hw_ops(ah);
+
+	priv_ops->set_rf_regs = NULL;
+	priv_ops->rf_alloc_ext_banks = NULL;
+	priv_ops->rf_free_ext_banks = NULL;
+	priv_ops->rf_set_freq = ar9002_hw_set_channel;
+	priv_ops->spur_mitigate_freq = ar9002_hw_spur_mitigate;
+	priv_ops->olc_init = ar9002_olc_init;
+	priv_ops->compute_pll_control = ar9002_hw_compute_pll_control;
+	priv_ops->do_getnf = ar9002_hw_do_getnf;
+
+	ops->antdiv_comb_conf_get = ar9002_hw_antdiv_comb_conf_get;
+	ops->antdiv_comb_conf_set = ar9002_hw_antdiv_comb_conf_set;
+
+	ar9002_hw_set_nf_limits(ah);
+}
diff --git a/drivers/net/wireless/ath/ath9k/hw-ops.h b/drivers/net/wireless/ath/ath9k/hw-ops.h
index 99f8334d1df..8b8f0445aef 100644
--- a/drivers/net/wireless/ath/ath9k/hw-ops.h
+++ b/drivers/net/wireless/ath/ath9k/hw-ops.h
@@ -121,6 +121,18 @@ static inline void ath9k_hw_set_clrdmask(struct ath_hw *ah, void *ds, bool val)
 	ath9k_hw_ops(ah)->set_clrdmask(ah, ds, val);
 }
 
+static inline void ath9k_hw_antdiv_comb_conf_get(struct ath_hw *ah,
+		struct ath_hw_antcomb_conf *antconf)
+{
+	ath9k_hw_ops(ah)->antdiv_comb_conf_get(ah, antconf);
+}
+
+static inline void ath9k_hw_antdiv_comb_conf_set(struct ath_hw *ah,
+		struct ath_hw_antcomb_conf *antconf)
+{
+	ath9k_hw_ops(ah)->antdiv_comb_conf_set(ah, antconf);
+}
+
 /* Private hardware call ops */
 
 /* PHY ops */
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index b2248bba25a..67cca10bf4c 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -629,6 +629,11 @@ struct ath_hw_ops {
 	void (*set11n_aggr_last)(struct ath_hw *ah, void *ds);
 	void (*clr11n_aggr)(struct ath_hw *ah, void *ds);
 	void (*set_clrdmask)(struct ath_hw *ah, void *ds, bool val);
+	void (*antdiv_comb_conf_get)(struct ath_hw *ah,
+			struct ath_hw_antcomb_conf *antconf);
+	void (*antdiv_comb_conf_set)(struct ath_hw *ah,
+			struct ath_hw_antcomb_conf *antconf);
+
 };
 
 struct ath_nf_limits {
@@ -904,10 +909,6 @@ void ath9k_hw_cfg_output(struct ath_hw *ah, u32 gpio,
 void ath9k_hw_set_gpio(struct ath_hw *ah, u32 gpio, u32 val);
 u32 ath9k_hw_getdefantenna(struct ath_hw *ah);
 void ath9k_hw_setantenna(struct ath_hw *ah, u32 antenna);
-void ath9k_hw_antdiv_comb_conf_get(struct ath_hw *ah,
-				   struct ath_hw_antcomb_conf *antconf);
-void ath9k_hw_antdiv_comb_conf_set(struct ath_hw *ah,
-				   struct ath_hw_antcomb_conf *antconf);
 
 /* General Operation */
 bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout);
-- 
cgit v1.2.3


From 21d2c63a2866a47030803de3db9b4e8759806095 Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Date: Fri, 13 May 2011 20:29:31 +0530
Subject: ath9k_hw: enable Antenna diversity for AR9485

read antenna diversity and combining information from the EEPROM.
Enable antenna diversity/combining feature only when both LNA
diversity and fast diversity are supported

Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com>
Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com>
Tested-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hw.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 58f3d421033..b75b5dca4e2 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -2022,6 +2022,22 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
 	}
 
 
+	if (AR_SREV_9485(ah)) {
+		ant_div_ctl1 = ah->eep_ops->get_eeprom(ah, EEP_ANT_DIV_CTL1);
+		/*
+		 * enable the diversity-combining algorithm only when
+		 * both enable_lna_div and enable_fast_div are set
+		 *		Table for Diversity
+		 * ant_div_alt_lnaconf		bit 0-1
+		 * ant_div_main_lnaconf		bit 2-3
+		 * ant_div_alt_gaintb		bit 4
+		 * ant_div_main_gaintb		bit 5
+		 * enable_ant_div_lnadiv	bit 6
+		 * enable_ant_fast_div		bit 7
+		 */
+		if ((ant_div_ctl1 >> 0x6) == 0x3)
+			pCap->hw_caps |= ATH9K_HW_CAP_ANT_DIV_COMB;
+	}
 
 	if (AR_SREV_9485_10(ah)) {
 		pCap->pcie_lcr_extsync_en = true;
-- 
cgit v1.2.3


From c6ba9feb4fa33f31f26ac1a2b0a337d79426b822 Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Date: Fri, 13 May 2011 20:29:53 +0530
Subject: ath9k_hw: define registers/macros to support Antenna diversity

define few registers and macros to configure/enable Antenna diversity
parameters in AR9485

Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com>
Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com>
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_phy.h | 22 ++++++++++++++++++++++
 drivers/net/wireless/ath/ath9k/hw.h         |  3 +++
 2 files changed, 25 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index 2a0d5cbb7e7..c7505b48e5c 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -261,12 +261,34 @@
 #define AR_PHY_EXT_CCA0         (AR_AGC_BASE + 0x20)
 #define AR_PHY_RESTART          (AR_AGC_BASE + 0x24)
 
+/*
+ * Antenna Diversity  settings
+ */
 #define AR_PHY_MC_GAIN_CTRL     (AR_AGC_BASE + 0x28)
 #define AR_ANT_DIV_CTRL_ALL	0x7e000000
 #define AR_ANT_DIV_CTRL_ALL_S	25
 #define AR_ANT_DIV_ENABLE	0x1000000
 #define AR_ANT_DIV_ENABLE_S	24
 
+
+#define AR_PHY_9485_ANT_FAST_DIV_BIAS			0x00007e00
+#define AR_PHY_9485_ANT_FAST_DIV_BIAS_S                  9
+#define AR_PHY_9485_ANT_DIV_LNADIV			0x01000000
+#define AR_PHY_9485_ANT_DIV_LNADIV_S			24
+#define AR_PHY_9485_ANT_DIV_ALT_LNACONF			0x06000000
+#define AR_PHY_9485_ANT_DIV_ALT_LNACONF_S		25
+#define AR_PHY_9485_ANT_DIV_MAIN_LNACONF		0x18000000
+#define AR_PHY_9485_ANT_DIV_MAIN_LNACONF_S		27
+#define AR_PHY_9485_ANT_DIV_ALT_GAINTB			0x20000000
+#define AR_PHY_9485_ANT_DIV_ALT_GAINTB_S		29
+#define AR_PHY_9485_ANT_DIV_MAIN_GAINTB			0x40000000
+#define AR_PHY_9485_ANT_DIV_MAIN_GAINTB_S		30
+
+#define AR_PHY_9485_ANT_DIV_LNA1_MINUS_LNA2		0x0
+#define AR_PHY_9485_ANT_DIV_LNA2			0x1
+#define AR_PHY_9485_ANT_DIV_LNA1			0x2
+#define AR_PHY_9485_ANT_DIV_LNA1_PLUS_LNA2		0x3
+
 #define AR_PHY_EXTCHN_PWRTHR1   (AR_AGC_BASE + 0x2c)
 #define AR_PHY_EXT_CHN_WIN      (AR_AGC_BASE + 0x30)
 #define AR_PHY_20_40_DET_THR    (AR_AGC_BASE + 0x34)
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 67cca10bf4c..80f512d1f97 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -479,6 +479,9 @@ struct ath_hw_antcomb_conf {
 	u8 main_lna_conf;
 	u8 alt_lna_conf;
 	u8 fast_div_bias;
+	u8 main_gaintb;
+	u8 alt_gaintb;
+	int lna1_lna2_delta;
 };
 
 /**
-- 
cgit v1.2.3


From 842ca780af06d166c87725b68f4fe359c3da7bc0 Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Date: Fri, 13 May 2011 20:30:27 +0530
Subject: ath9k_hw: config diversity based on eeprom contents

* enable LNA-diversity, fast-diversity for AR9485 based  on
  the value read from EEPROM content
* if antenna diversity/combining is supported, set LNA1 for the main
  antenna and LNA2 for the alternate antenna based on the new diversity
  algorithm

Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com>
Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com>
Cc: Luis Rodriguez <Luis.Rodriguez@Atheros.com>
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 50 ++++++++++++++++++++++----
 1 file changed, 44 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 6dfb69ae5b0..c7ad0562596 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3498,6 +3498,8 @@ static u16 ar9003_hw_ant_ctrl_chain_get(struct ath_hw *ah,
 static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz)
 {
 	int chain;
+	u32 regval;
+	u32 ant_div_ctl1;
 	static const u32 switch_chain_reg[AR9300_MAX_CHAINS] = {
 			AR_PHY_SWITCH_CHAIN_0,
 			AR_PHY_SWITCH_CHAIN_1,
@@ -3523,13 +3525,49 @@ static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz)
 
 	if (AR_SREV_9485(ah)) {
 		value = ath9k_hw_ar9300_get_eeprom(ah, EEP_ANT_DIV_CTL1);
-		REG_RMW_FIELD(ah, AR_PHY_MC_GAIN_CTRL, AR_ANT_DIV_CTRL_ALL,
-			      value);
-		REG_RMW_FIELD(ah, AR_PHY_MC_GAIN_CTRL, AR_ANT_DIV_ENABLE,
-			      value >> 6);
-		REG_RMW_FIELD(ah, AR_PHY_CCK_DETECT, AR_FAST_DIV_ENABLE,
-			      value >> 7);
+		/*
+		 * main_lnaconf, alt_lnaconf, main_tb, alt_tb
+		 * are the fields present
+		 */
+		regval = REG_READ(ah, AR_PHY_MC_GAIN_CTRL);
+		regval &= (~AR_ANT_DIV_CTRL_ALL);
+		regval |= (value & 0x3f) << AR_ANT_DIV_CTRL_ALL_S;
+		/* enable_lnadiv */
+		regval &= (~AR_PHY_9485_ANT_DIV_LNADIV);
+		regval |= ((value >> 6) & 0x1) <<
+				AR_PHY_9485_ANT_DIV_LNADIV_S;
+		REG_WRITE(ah, AR_PHY_MC_GAIN_CTRL, regval);
+
+		/*enable fast_div */
+		regval = REG_READ(ah, AR_PHY_CCK_DETECT);
+		regval &= (~AR_FAST_DIV_ENABLE);
+		regval |= ((value >> 7) & 0x1) <<
+				AR_FAST_DIV_ENABLE_S;
+		REG_WRITE(ah, AR_PHY_CCK_DETECT, regval);
+		ant_div_ctl1 =
+			ah->eep_ops->get_eeprom(ah, EEP_ANT_DIV_CTL1);
+		/* check whether antenna diversity is enabled */
+		if ((ant_div_ctl1 >> 0x6) == 0x3) {
+			regval = REG_READ(ah, AR_PHY_MC_GAIN_CTRL);
+			/*
+			 * clear bits 25-30 main_lnaconf, alt_lnaconf,
+			 * main_tb, alt_tb
+			 */
+			regval &= (~(AR_PHY_9485_ANT_DIV_MAIN_LNACONF |
+					AR_PHY_9485_ANT_DIV_ALT_LNACONF |
+					AR_PHY_9485_ANT_DIV_ALT_GAINTB |
+					AR_PHY_9485_ANT_DIV_MAIN_GAINTB));
+			/* by default use LNA1 for the main antenna */
+			regval |= (AR_PHY_9485_ANT_DIV_LNA1 <<
+					AR_PHY_9485_ANT_DIV_MAIN_LNACONF_S);
+			regval |= (AR_PHY_9485_ANT_DIV_LNA2 <<
+					AR_PHY_9485_ANT_DIV_ALT_LNACONF_S);
+			REG_WRITE(ah, AR_PHY_MC_GAIN_CTRL, regval);
+		}
+
+
 	}
+
 }
 
 static void ar9003_hw_drive_strength_apply(struct ath_hw *ah)
-- 
cgit v1.2.3


From 6bcbc062c23ac769cb775f3d2cf209db9d1a96fe Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Date: Fri, 13 May 2011 20:30:41 +0530
Subject: ath9k_hw: define modules to get/set Antenna diversity paramaters

these are the two important modules that will be called by the antenna
diversity algorithm module in the rx. this will continuosly configure
the hardware based on the current diversity status obtained
from the algorithm

Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com>
Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com>
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_phy.c | 44 +++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index c83be2dd571..d2a5d2737cd 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -1184,9 +1184,50 @@ static void ar9003_hw_set_radar_conf(struct ath_hw *ah)
 	conf->radar_inband = 8;
 }
 
+static void ar9003_hw_antdiv_comb_conf_get(struct ath_hw *ah,
+				   struct ath_hw_antcomb_conf *antconf)
+{
+	u32 regval;
+
+	regval = REG_READ(ah, AR_PHY_MC_GAIN_CTRL);
+	antconf->main_lna_conf = (regval & AR_PHY_9485_ANT_DIV_MAIN_LNACONF) >>
+				  AR_PHY_9485_ANT_DIV_MAIN_LNACONF_S;
+	antconf->alt_lna_conf = (regval & AR_PHY_9485_ANT_DIV_ALT_LNACONF) >>
+				 AR_PHY_9485_ANT_DIV_ALT_LNACONF_S;
+	antconf->fast_div_bias = (regval & AR_PHY_9485_ANT_FAST_DIV_BIAS) >>
+				  AR_PHY_9485_ANT_FAST_DIV_BIAS_S;
+}
+
+static void ar9003_hw_antdiv_comb_conf_set(struct ath_hw *ah,
+				   struct ath_hw_antcomb_conf *antconf)
+{
+	u32 regval;
+
+	regval = REG_READ(ah, AR_PHY_MC_GAIN_CTRL);
+	regval &= ~(AR_PHY_9485_ANT_DIV_MAIN_LNACONF |
+		    AR_PHY_9485_ANT_DIV_ALT_LNACONF |
+		    AR_PHY_9485_ANT_FAST_DIV_BIAS |
+		    AR_PHY_9485_ANT_DIV_MAIN_GAINTB |
+		    AR_PHY_9485_ANT_DIV_ALT_GAINTB);
+	regval |= ((antconf->main_lna_conf <<
+					AR_PHY_9485_ANT_DIV_MAIN_LNACONF_S)
+		   & AR_PHY_9485_ANT_DIV_MAIN_LNACONF);
+	regval |= ((antconf->alt_lna_conf << AR_PHY_9485_ANT_DIV_ALT_LNACONF_S)
+		   & AR_PHY_9485_ANT_DIV_ALT_LNACONF);
+	regval |= ((antconf->fast_div_bias << AR_PHY_9485_ANT_FAST_DIV_BIAS_S)
+		   & AR_PHY_9485_ANT_FAST_DIV_BIAS);
+	regval |= ((antconf->main_gaintb << AR_PHY_9485_ANT_DIV_MAIN_GAINTB_S)
+		   & AR_PHY_9485_ANT_DIV_MAIN_GAINTB);
+	regval |= ((antconf->alt_gaintb << AR_PHY_9485_ANT_DIV_ALT_GAINTB_S)
+		   & AR_PHY_9485_ANT_DIV_ALT_GAINTB);
+
+	REG_WRITE(ah, AR_PHY_MC_GAIN_CTRL, regval);
+}
+
 void ar9003_hw_attach_phy_ops(struct ath_hw *ah)
 {
 	struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
+	struct ath_hw_ops *ops = ath9k_hw_ops(ah);
 	static const u32 ar9300_cca_regs[6] = {
 		AR_PHY_CCA_0,
 		AR_PHY_CCA_1,
@@ -1213,6 +1254,9 @@ void ar9003_hw_attach_phy_ops(struct ath_hw *ah)
 	priv_ops->ani_cache_ini_regs = ar9003_hw_ani_cache_ini_regs;
 	priv_ops->set_radar_params = ar9003_hw_set_radar_params;
 
+	ops->antdiv_comb_conf_get = ar9003_hw_antdiv_comb_conf_get;
+	ops->antdiv_comb_conf_set = ar9003_hw_antdiv_comb_conf_set;
+
 	ar9003_hw_set_nf_limits(ah);
 	ar9003_hw_set_radar_conf(ah);
 	memcpy(ah->nf_regs, ar9300_cca_regs, sizeof(ah->nf_regs));
-- 
cgit v1.2.3


From 8afbcc8bfb549a522298fa4a31ee5155c2b5f7a0 Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Date: Fri, 13 May 2011 20:30:56 +0530
Subject: ath9k_hw: define antenna diversity group

AR9285 belongs to diversity group 0 and AR9485 belongs to diversity
group 2. Based on the diversity group we configure certain antenna
diversity paramaters such as lna1_lna2_delta and fast diversity
bias values. For AR9485 we have some gain table parameter which
selects the gain table 0/1 for main and alternate antenna

Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com>
Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com>
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9002_phy.c | 2 ++
 drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 ++
 drivers/net/wireless/ath/ath9k/ath9k.h      | 1 -
 drivers/net/wireless/ath/ath9k/hw.h         | 1 +
 drivers/net/wireless/ath/ath9k/recv.c       | 2 +-
 5 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
index b4a0c1d3b11..a57e963cf0d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
@@ -529,6 +529,8 @@ static void ar9002_hw_antdiv_comb_conf_get(struct ath_hw *ah,
 				 AR_PHY_9285_ANT_DIV_ALT_LNACONF_S;
 	antconf->fast_div_bias = (regval & AR_PHY_9285_FAST_DIV_BIAS) >>
 				  AR_PHY_9285_FAST_DIV_BIAS_S;
+	antconf->lna1_lna2_delta = -3;
+	antconf->div_group = 0;
 }
 
 static void ar9002_hw_antdiv_comb_conf_set(struct ath_hw *ah,
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index d2a5d2737cd..25f3c2fdf2b 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -1196,6 +1196,8 @@ static void ar9003_hw_antdiv_comb_conf_get(struct ath_hw *ah,
 				 AR_PHY_9485_ANT_DIV_ALT_LNACONF_S;
 	antconf->fast_div_bias = (regval & AR_PHY_9485_ANT_FAST_DIV_BIAS) >>
 				  AR_PHY_9485_ANT_FAST_DIV_BIAS_S;
+	antconf->lna1_lna2_delta = -9;
+	antconf->div_group = 2;
 }
 
 static void ar9003_hw_antdiv_comb_conf_set(struct ath_hw *ah,
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index f2f672bc596..03b37d7be1c 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -483,7 +483,6 @@ static inline void ath_deinit_leds(struct ath_softc *sc)
 #define ATH_ANT_DIV_COMB_ALT_ANT_RATIO 30
 #define ATH_ANT_DIV_COMB_ALT_ANT_RATIO2 20
 
-#define ATH_ANT_DIV_COMB_LNA1_LNA2_DELTA -3
 #define ATH_ANT_DIV_COMB_LNA1_LNA2_SWITCH_DELTA -1
 #define ATH_ANT_DIV_COMB_LNA1_DELTA_HI -4
 #define ATH_ANT_DIV_COMB_LNA1_DELTA_MID -2
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 80f512d1f97..7af2773d2bf 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -482,6 +482,7 @@ struct ath_hw_antcomb_conf {
 	u8 main_gaintb;
 	u8 alt_gaintb;
 	int lna1_lna2_delta;
+	u8 div_group;
 };
 
 /**
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 9fcd1e4f450..85e05329a60 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -1442,7 +1442,7 @@ static void ath_ant_comb_scan(struct ath_softc *sc, struct ath_rx_status *rs)
 		}
 
 		if ((alt_rssi_avg < (main_rssi_avg +
-		    ATH_ANT_DIV_COMB_LNA1_LNA2_DELTA)))
+						div_ant_conf.lna1_lna2_delta)))
 			goto div_comb_done;
 	}
 
-- 
cgit v1.2.3


From b85c5734f00886ee0f33ef4d0038ed9a278eefce Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Date: Fri, 13 May 2011 20:31:09 +0530
Subject: ath9k: Implement an API to swap main/ALT LNA's

for the diversity group 2(AR9485) we swap the LNA's of main/ALT antenna
based on alternate antenna's rssi average in comparision with main
antenna's rssi, while for AR9285(antenna diversity group 0)we still
follow the older method of looking at the packet count in alternate
antenna

Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com>
Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com>
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/recv.c | 31 ++++++++++++++++++++++++++++++-
 1 file changed, 30 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 85e05329a60..47e0fc1aaba 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -28,6 +28,33 @@ static inline bool ath_is_alt_ant_ratio_better(int alt_ratio, int maxdelta,
 		(alt_rssi_avg > main_rssi_avg + mindelta)) && (pkt_count > 50);
 }
 
+static inline bool ath_ant_div_comb_alt_check(u8 div_group, int alt_ratio,
+					int curr_main_set, int curr_alt_set,
+					int alt_rssi_avg, int main_rssi_avg)
+{
+	bool result = false;
+	switch (div_group) {
+	case 0:
+		if (alt_ratio > ATH_ANT_DIV_COMB_ALT_ANT_RATIO)
+			result = true;
+		break;
+	case 1:
+		if ((((curr_main_set == ATH_ANT_DIV_COMB_LNA2) &&
+			(curr_alt_set == ATH_ANT_DIV_COMB_LNA1) &&
+				(alt_rssi_avg >= (main_rssi_avg - 5))) ||
+			((curr_main_set == ATH_ANT_DIV_COMB_LNA1) &&
+			(curr_alt_set == ATH_ANT_DIV_COMB_LNA2) &&
+				(alt_rssi_avg >= (main_rssi_avg - 2)))) &&
+							(alt_rssi_avg >= 4))
+			result = true;
+		else
+			result = false;
+		break;
+	}
+
+	return result;
+}
+
 static inline bool ath9k_check_auto_sleep(struct ath_softc *sc)
 {
 	return sc->ps_enabled &&
@@ -1413,7 +1440,9 @@ static void ath_ant_comb_scan(struct ath_softc *sc, struct ath_rx_status *rs)
 	}
 
 	if (!antcomb->scan) {
-		if (alt_ratio > ATH_ANT_DIV_COMB_ALT_ANT_RATIO) {
+		if (ath_ant_div_comb_alt_check(div_ant_conf.div_group,
+					alt_ratio, curr_main_set, curr_alt_set,
+					alt_rssi_avg, main_rssi_avg)) {
 			if (curr_alt_set == ATH_ANT_DIV_COMB_LNA2) {
 				/* Switch main and alt LNA */
 				div_ant_conf.main_lna_conf =
-- 
cgit v1.2.3


From 3e9a212a9e21266115bad2982016950fb2bf29c2 Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Date: Fri, 13 May 2011 20:31:23 +0530
Subject: ath9k: configure fast_div_bias based on diversity group

configure fast diversity bias based on the antenna diversity group and
based on main/alt LNA configurations. also configure main antenna and
alternate antenna to gain-table 0 for diversity group 2(AR9485)

Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com>
Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com>
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/recv.c | 174 +++++++++++++++++++++++++---------
 1 file changed, 131 insertions(+), 43 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 47e0fc1aaba..2fecfcb7810 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -1317,49 +1317,138 @@ static void ath_select_ant_div_from_quick_scan(struct ath_ant_comb *antcomb,
 	}
 }
 
-static void ath_ant_div_conf_fast_divbias(struct ath_hw_antcomb_conf *ant_conf)
+static void ath_ant_div_conf_fast_divbias(struct ath_hw_antcomb_conf *ant_conf,
+		struct ath_ant_comb *antcomb, int alt_ratio)
 {
-	/* Adjust the fast_div_bias based on main and alt lna conf */
-	switch ((ant_conf->main_lna_conf << 4) | ant_conf->alt_lna_conf) {
-	case (0x01): /* A-B LNA2 */
-		ant_conf->fast_div_bias = 0x3b;
-		break;
-	case (0x02): /* A-B LNA1 */
-		ant_conf->fast_div_bias = 0x3d;
-		break;
-	case (0x03): /* A-B A+B */
-		ant_conf->fast_div_bias = 0x1;
-		break;
-	case (0x10): /* LNA2 A-B */
-		ant_conf->fast_div_bias = 0x7;
-		break;
-	case (0x12): /* LNA2 LNA1 */
-		ant_conf->fast_div_bias = 0x2;
-		break;
-	case (0x13): /* LNA2 A+B */
-		ant_conf->fast_div_bias = 0x7;
-		break;
-	case (0x20): /* LNA1 A-B */
-		ant_conf->fast_div_bias = 0x6;
-		break;
-	case (0x21): /* LNA1 LNA2 */
-		ant_conf->fast_div_bias = 0x0;
-		break;
-	case (0x23): /* LNA1 A+B */
-		ant_conf->fast_div_bias = 0x6;
-		break;
-	case (0x30): /* A+B A-B */
-		ant_conf->fast_div_bias = 0x1;
-		break;
-	case (0x31): /* A+B LNA2 */
-		ant_conf->fast_div_bias = 0x3b;
-		break;
-	case (0x32): /* A+B LNA1 */
-		ant_conf->fast_div_bias = 0x3d;
-		break;
-	default:
-		break;
+	if (ant_conf->div_group == 0) {
+		/* Adjust the fast_div_bias based on main and alt lna conf */
+		switch ((ant_conf->main_lna_conf << 4) |
+				ant_conf->alt_lna_conf) {
+		case (0x01): /* A-B LNA2 */
+			ant_conf->fast_div_bias = 0x3b;
+			break;
+		case (0x02): /* A-B LNA1 */
+			ant_conf->fast_div_bias = 0x3d;
+			break;
+		case (0x03): /* A-B A+B */
+			ant_conf->fast_div_bias = 0x1;
+			break;
+		case (0x10): /* LNA2 A-B */
+			ant_conf->fast_div_bias = 0x7;
+			break;
+		case (0x12): /* LNA2 LNA1 */
+			ant_conf->fast_div_bias = 0x2;
+			break;
+		case (0x13): /* LNA2 A+B */
+			ant_conf->fast_div_bias = 0x7;
+			break;
+		case (0x20): /* LNA1 A-B */
+			ant_conf->fast_div_bias = 0x6;
+			break;
+		case (0x21): /* LNA1 LNA2 */
+			ant_conf->fast_div_bias = 0x0;
+			break;
+		case (0x23): /* LNA1 A+B */
+			ant_conf->fast_div_bias = 0x6;
+			break;
+		case (0x30): /* A+B A-B */
+			ant_conf->fast_div_bias = 0x1;
+			break;
+		case (0x31): /* A+B LNA2 */
+			ant_conf->fast_div_bias = 0x3b;
+			break;
+		case (0x32): /* A+B LNA1 */
+			ant_conf->fast_div_bias = 0x3d;
+			break;
+		default:
+			break;
+		}
+	} else if (ant_conf->div_group == 2) {
+		/* Adjust the fast_div_bias based on main and alt_lna_conf */
+		switch ((ant_conf->main_lna_conf << 4) |
+				ant_conf->alt_lna_conf) {
+		case (0x01): /* A-B LNA2 */
+			ant_conf->fast_div_bias = 0x1;
+			ant_conf->main_gaintb = 0;
+			ant_conf->alt_gaintb = 0;
+			break;
+		case (0x02): /* A-B LNA1 */
+			ant_conf->fast_div_bias = 0x1;
+			ant_conf->main_gaintb = 0;
+			ant_conf->alt_gaintb = 0;
+			break;
+		case (0x03): /* A-B A+B */
+			ant_conf->fast_div_bias = 0x1;
+			ant_conf->main_gaintb = 0;
+			ant_conf->alt_gaintb = 0;
+			break;
+		case (0x10): /* LNA2 A-B */
+			if (!(antcomb->scan) &&
+				(alt_ratio > ATH_ANT_DIV_COMB_ALT_ANT_RATIO))
+				ant_conf->fast_div_bias = 0x1;
+			else
+				ant_conf->fast_div_bias = 0x2;
+			ant_conf->main_gaintb = 0;
+			ant_conf->alt_gaintb = 0;
+			break;
+		case (0x12): /* LNA2 LNA1 */
+			ant_conf->fast_div_bias = 0x1;
+			ant_conf->main_gaintb = 0;
+			ant_conf->alt_gaintb = 0;
+			break;
+		case (0x13): /* LNA2 A+B */
+			if (!(antcomb->scan) &&
+				(alt_ratio > ATH_ANT_DIV_COMB_ALT_ANT_RATIO))
+				ant_conf->fast_div_bias = 0x1;
+			else
+				ant_conf->fast_div_bias = 0x2;
+			ant_conf->main_gaintb = 0;
+			ant_conf->alt_gaintb = 0;
+			break;
+		case (0x20): /* LNA1 A-B */
+			if (!(antcomb->scan) &&
+				(alt_ratio > ATH_ANT_DIV_COMB_ALT_ANT_RATIO))
+				ant_conf->fast_div_bias = 0x1;
+			else
+				ant_conf->fast_div_bias = 0x2;
+			ant_conf->main_gaintb = 0;
+			ant_conf->alt_gaintb = 0;
+			break;
+		case (0x21): /* LNA1 LNA2 */
+			ant_conf->fast_div_bias = 0x1;
+			ant_conf->main_gaintb = 0;
+			ant_conf->alt_gaintb = 0;
+			break;
+		case (0x23): /* LNA1 A+B */
+			if (!(antcomb->scan) &&
+				(alt_ratio > ATH_ANT_DIV_COMB_ALT_ANT_RATIO))
+				ant_conf->fast_div_bias = 0x1;
+			else
+				ant_conf->fast_div_bias = 0x2;
+			ant_conf->main_gaintb = 0;
+			ant_conf->alt_gaintb = 0;
+			break;
+		case (0x30): /* A+B A-B */
+			ant_conf->fast_div_bias = 0x1;
+			ant_conf->main_gaintb = 0;
+			ant_conf->alt_gaintb = 0;
+			break;
+		case (0x31): /* A+B LNA2 */
+			ant_conf->fast_div_bias = 0x1;
+			ant_conf->main_gaintb = 0;
+			ant_conf->alt_gaintb = 0;
+			break;
+		case (0x32): /* A+B LNA1 */
+			ant_conf->fast_div_bias = 0x1;
+			ant_conf->main_gaintb = 0;
+			ant_conf->alt_gaintb = 0;
+			break;
+		default:
+			break;
+		}
+
 	}
+
 }
 
 /* Antenna diversity and combining */
@@ -1585,8 +1674,7 @@ static void ath_ant_comb_scan(struct ath_softc *sc, struct ath_rx_status *rs)
 	antcomb->quick_scan_cnt++;
 
 div_comb_done:
-	ath_ant_div_conf_fast_divbias(&div_ant_conf);
-
+	ath_ant_div_conf_fast_divbias(&div_ant_conf, antcomb, alt_ratio);
 	ath9k_hw_antdiv_comb_conf_set(sc->sc_ah, &div_ant_conf);
 
 	antcomb->scan_start_time = jiffies;
-- 
cgit v1.2.3


From 21e8ee6d207f6d384689571101436eb9070c22ca Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Date: Fri, 13 May 2011 20:31:40 +0530
Subject: ath9k: make sure main_rssi is positive

some times the rssi control descriptor for the main antenna may be
negative like that of alternate antenna, hence before  incrementing
packet counts/rssi of main/alternate antenna make sure both main_rssi
and alt_rssi are positive only. this avoids wrong selection of antenna
due to diversity

Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com>
Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com>
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/recv.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 2fecfcb7810..4f52e0429f9 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -1468,8 +1468,8 @@ static void ath_ant_comb_scan(struct ath_softc *sc, struct ath_rx_status *rs)
 	main_ant_conf = (rs->rs_rssi_ctl2 >> ATH_ANT_RX_MAIN_SHIFT) &
 			 ATH_ANT_RX_MASK;
 
-	/* Record packet only when alt_rssi is positive */
-	if (alt_rssi > 0) {
+	/* Record packet only when both main_rssi and  alt_rssi is positive */
+	if (main_rssi > 0 && alt_rssi > 0) {
 		antcomb->total_pkt_count++;
 		antcomb->main_total_rssi += main_rssi;
 		antcomb->alt_total_rssi  += alt_rssi;
-- 
cgit v1.2.3


From 108697c44b8e50bea3505c6bf9667da4627cb2d5 Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Date: Fri, 13 May 2011 20:59:42 +0530
Subject: ath9k: make npending frames check as bool

we are not doing anything by tracking the number of pending frames.
bail out when we first find a pending frame in any one of the 10 queues.

Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/main.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 33816091b43..45303bdbc46 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2276,7 +2276,7 @@ static void ath9k_flush(struct ieee80211_hw *hw, bool drop)
 		timeout = 1;
 
 	for (j = 0; j < timeout; j++) {
-		int npend = 0;
+		bool npend = false;
 
 		if (j)
 			usleep_range(1000, 2000);
@@ -2285,7 +2285,10 @@ static void ath9k_flush(struct ieee80211_hw *hw, bool drop)
 			if (!ATH_TXQ_SETUP(sc, i))
 				continue;
 
-			npend += ath9k_has_pending_frames(sc, &sc->tx.txq[i]);
+			npend = ath9k_has_pending_frames(sc, &sc->tx.txq[i]);
+
+			if (npend)
+				break;
 		}
 
 		if (!npend)
-- 
cgit v1.2.3


From 57cf8043a64b56a10b9f194572548a3dfb62e596 Mon Sep 17 00:00:00 2001
From: Javier Cardona <javier@cozybit.com>
Date: Fri, 13 May 2011 10:45:43 -0700
Subject: nl80211: Move peer link state definition to nl80211

These definitions need to be exposed now that we can set the peer link
states via NL80211_ATTR_STA_PLINK_STATE.  They were already being
(opaquely) reported by NL80211_STA_INFO_PLINK_STATE.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/nl80211.h   | 41 +++++++++++++++++++++++++--
 include/net/cfg80211.h    | 27 ------------------
 net/mac80211/cfg.c        |  6 ++--
 net/mac80211/mesh_plink.c | 72 +++++++++++++++++++++++------------------------
 net/mac80211/rx.c         |  2 +-
 net/mac80211/sta_info.c   |  2 +-
 net/mac80211/sta_info.h   |  6 ++--
 net/wireless/nl80211.c    |  2 +-
 8 files changed, 83 insertions(+), 75 deletions(-)

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 0ea497cb607..fc3a94821b1 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -973,9 +973,10 @@ enum nl80211_commands {
  * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver
  *	allows auth frames in a mesh to be passed to userspace for processing via
  *	the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
- * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link. Used when
- *      userspace is driving the peer link management state machine.
- *      @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled.
+ * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as
+ *	defined in &enum nl80211_plink_state. Used when userspace is
+ *	driving the peer link management state machine.
+ *	@NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled.
  *
  * @NL80211_ATTR_WOWLAN_SUPPORTED: indicates, as part of the wiphy capabilities,
  *	the supported WoWLAN triggers
@@ -1396,6 +1397,7 @@ enum nl80211_sta_bss_param {
  * @NL80211_STA_INFO_LLID: the station's mesh LLID
  * @NL80211_STA_INFO_PLID: the station's mesh PLID
  * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
+ *	(see %enum nl80211_plink_state)
  * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested
  *	attribute, like NL80211_STA_INFO_TX_BITRATE.
  * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
@@ -2326,4 +2328,37 @@ enum nl80211_if_combination_attrs {
 	MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1
 };
 
+
+/**
+ * enum nl80211_plink_state - state of a mesh peer link finite state machine
+ *
+ * @NL80211_PLINK_LISTEN: initial state, considered the implicit
+ *	state of non existant mesh peer links
+ * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
+ *	this mesh peer
+ * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
+ *	from this mesh peer
+ * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been
+ *	received from this mesh peer
+ * @NL80211_PLINK_ESTAB: mesh peer link is established
+ * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled
+ * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh
+ *	plink are discarded
+ * @NUM_NL80211_PLINK_STATES: number of peer link states
+ * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states
+ */
+enum nl80211_plink_state {
+	NL80211_PLINK_LISTEN,
+	NL80211_PLINK_OPN_SNT,
+	NL80211_PLINK_OPN_RCVD,
+	NL80211_PLINK_CNF_RCVD,
+	NL80211_PLINK_ESTAB,
+	NL80211_PLINK_HOLDING,
+	NL80211_PLINK_BLOCKED,
+
+	/* keep last */
+	NUM_NL80211_PLINK_STATES,
+	MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1
+};
+
 #endif /* __LINUX_NL80211_H */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 04afcfb9eaf..0a2d795d35d 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -371,33 +371,6 @@ enum plink_actions {
 	PLINK_ACTION_BLOCK,
 };
 
-/**
- * enum plink_states - state of a mesh peer link finite state machine
- *
- * @PLINK_LISTEN: initial state, considered the implicit state of non
- * existant mesh peer links
- * @PLINK_OPN_SNT: mesh plink open frame has been sent to this mesh
- * peer @PLINK_OPN_RCVD: mesh plink open frame has been received from
- * this mesh peer
- * @PLINK_CNF_RCVD: mesh plink confirm frame has been received from
- * this mesh peer
- * @PLINK_ESTAB: mesh peer link is established
- * @PLINK_HOLDING: mesh peer link is being closed or cancelled
- * @PLINK_BLOCKED: all frames transmitted from this mesh plink are
- * discarded
- * @PLINK_INVALID: reserved
- */
-enum plink_state {
-	PLINK_LISTEN,
-	PLINK_OPN_SNT,
-	PLINK_OPN_RCVD,
-	PLINK_CNF_RCVD,
-	PLINK_ESTAB,
-	PLINK_HOLDING,
-	PLINK_BLOCKED,
-	PLINK_INVALID,
-};
-
 /**
  * struct station_parameters - station parameters
  *
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 6ecd5862735..be70c70d3f5 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -730,9 +730,9 @@ static void sta_apply_parameters(struct ieee80211_local *local,
 #ifdef CONFIG_MAC80211_MESH
 		if (sdata->u.mesh.security & IEEE80211_MESH_SEC_SECURED)
 			switch (params->plink_state) {
-			case PLINK_LISTEN:
-			case PLINK_ESTAB:
-			case PLINK_BLOCKED:
+			case NL80211_PLINK_LISTEN:
+			case NL80211_PLINK_ESTAB:
+			case NL80211_PLINK_BLOCKED:
 				sta->plink_state = params->plink_state;
 				break;
 			default:
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index 2c37bee3095..f4adc091788 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -83,7 +83,7 @@ void mesh_plink_dec_estab_count(struct ieee80211_sub_if_data *sdata)
  */
 static inline void mesh_plink_fsm_restart(struct sta_info *sta)
 {
-	sta->plink_state = PLINK_LISTEN;
+	sta->plink_state = NL80211_PLINK_LISTEN;
 	sta->llid = sta->plid = sta->reason = 0;
 	sta->plink_retries = 0;
 }
@@ -126,11 +126,11 @@ static bool __mesh_plink_deactivate(struct sta_info *sta)
 	struct ieee80211_sub_if_data *sdata = sta->sdata;
 	bool deactivated = false;
 
-	if (sta->plink_state == PLINK_ESTAB) {
+	if (sta->plink_state == NL80211_PLINK_ESTAB) {
 		mesh_plink_dec_estab_count(sdata);
 		deactivated = true;
 	}
-	sta->plink_state = PLINK_BLOCKED;
+	sta->plink_state = NL80211_PLINK_BLOCKED;
 	mesh_path_flush_by_nexthop(sta);
 
 	return deactivated;
@@ -268,7 +268,7 @@ void mesh_neighbour_update(u8 *hw_addr, u32 rates,
 	sta->last_rx = jiffies;
 	sta->sta.supp_rates[local->hw.conf.channel->band] = rates;
 	if (mesh_peer_accepts_plinks(elems) &&
-			sta->plink_state == PLINK_LISTEN &&
+			sta->plink_state == NL80211_PLINK_LISTEN &&
 			sdata->u.mesh.accepting_plinks &&
 			sdata->u.mesh.mshcfg.auto_open_plinks)
 		mesh_plink_open(sta);
@@ -308,8 +308,8 @@ static void mesh_plink_timer(unsigned long data)
 	sdata = sta->sdata;
 
 	switch (sta->plink_state) {
-	case PLINK_OPN_RCVD:
-	case PLINK_OPN_SNT:
+	case NL80211_PLINK_OPN_RCVD:
+	case NL80211_PLINK_OPN_SNT:
 		/* retry timer */
 		if (sta->plink_retries < dot11MeshMaxRetries(sdata)) {
 			u32 rand;
@@ -328,17 +328,17 @@ static void mesh_plink_timer(unsigned long data)
 		}
 		reason = cpu_to_le16(MESH_MAX_RETRIES);
 		/* fall through on else */
-	case PLINK_CNF_RCVD:
+	case NL80211_PLINK_CNF_RCVD:
 		/* confirm timer */
 		if (!reason)
 			reason = cpu_to_le16(MESH_CONFIRM_TIMEOUT);
-		sta->plink_state = PLINK_HOLDING;
+		sta->plink_state = NL80211_PLINK_HOLDING;
 		mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata));
 		spin_unlock_bh(&sta->lock);
 		mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid, plid,
 				    reason);
 		break;
-	case PLINK_HOLDING:
+	case NL80211_PLINK_HOLDING:
 		/* holding timer */
 		del_timer(&sta->plink_timer);
 		mesh_plink_fsm_restart(sta);
@@ -386,11 +386,11 @@ int mesh_plink_open(struct sta_info *sta)
 	spin_lock_bh(&sta->lock);
 	get_random_bytes(&llid, 2);
 	sta->llid = llid;
-	if (sta->plink_state != PLINK_LISTEN) {
+	if (sta->plink_state != NL80211_PLINK_LISTEN) {
 		spin_unlock_bh(&sta->lock);
 		return -EBUSY;
 	}
-	sta->plink_state = PLINK_OPN_SNT;
+	sta->plink_state = NL80211_PLINK_OPN_SNT;
 	mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata));
 	spin_unlock_bh(&sta->lock);
 	mpl_dbg("Mesh plink: starting establishment with %pM\n",
@@ -407,7 +407,7 @@ void mesh_plink_block(struct sta_info *sta)
 
 	spin_lock_bh(&sta->lock);
 	deactivated = __mesh_plink_deactivate(sta);
-	sta->plink_state = PLINK_BLOCKED;
+	sta->plink_state = NL80211_PLINK_BLOCKED;
 	spin_unlock_bh(&sta->lock);
 
 	if (deactivated)
@@ -430,13 +430,13 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 	__le16 plid, llid, reason;
 #ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
 	static const char *mplstates[] = {
-		[PLINK_LISTEN] = "LISTEN",
-		[PLINK_OPN_SNT] = "OPN-SNT",
-		[PLINK_OPN_RCVD] = "OPN-RCVD",
-		[PLINK_CNF_RCVD] = "CNF_RCVD",
-		[PLINK_ESTAB] = "ESTAB",
-		[PLINK_HOLDING] = "HOLDING",
-		[PLINK_BLOCKED] = "BLOCKED"
+		[NL80211_PLINK_LISTEN] = "LISTEN",
+		[NL80211_PLINK_OPN_SNT] = "OPN-SNT",
+		[NL80211_PLINK_OPN_RCVD] = "OPN-RCVD",
+		[NL80211_PLINK_CNF_RCVD] = "CNF_RCVD",
+		[NL80211_PLINK_ESTAB] = "ESTAB",
+		[NL80211_PLINK_HOLDING] = "HOLDING",
+		[NL80211_PLINK_BLOCKED] = "BLOCKED"
 	};
 #endif
 
@@ -502,7 +502,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 		return;
 	}
 
-	if (sta && sta->plink_state == PLINK_BLOCKED) {
+	if (sta && sta->plink_state == NL80211_PLINK_BLOCKED) {
 		rcu_read_unlock();
 		return;
 	}
@@ -572,7 +572,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 				event = CNF_ACPT;
 			break;
 		case PLINK_CLOSE:
-			if (sta->plink_state == PLINK_ESTAB)
+			if (sta->plink_state == NL80211_PLINK_ESTAB)
 				/* Do not check for llid or plid. This does not
 				 * follow the standard but since multiple plinks
 				 * per sta are not supported, it is necessary in
@@ -607,14 +607,14 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 	reason = 0;
 	switch (sta->plink_state) {
 		/* spin_unlock as soon as state is updated at each case */
-	case PLINK_LISTEN:
+	case NL80211_PLINK_LISTEN:
 		switch (event) {
 		case CLS_ACPT:
 			mesh_plink_fsm_restart(sta);
 			spin_unlock_bh(&sta->lock);
 			break;
 		case OPN_ACPT:
-			sta->plink_state = PLINK_OPN_RCVD;
+			sta->plink_state = NL80211_PLINK_OPN_RCVD;
 			sta->plid = plid;
 			get_random_bytes(&llid, 2);
 			sta->llid = llid;
@@ -631,7 +631,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 		}
 		break;
 
-	case PLINK_OPN_SNT:
+	case NL80211_PLINK_OPN_SNT:
 		switch (event) {
 		case OPN_RJCT:
 		case CNF_RJCT:
@@ -640,7 +640,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			if (!reason)
 				reason = cpu_to_le16(MESH_CLOSE_RCVD);
 			sta->reason = reason;
-			sta->plink_state = PLINK_HOLDING;
+			sta->plink_state = NL80211_PLINK_HOLDING;
 			if (!mod_plink_timer(sta,
 					     dot11MeshHoldingTimeout(sdata)))
 				sta->ignore_plink_timer = true;
@@ -652,7 +652,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			break;
 		case OPN_ACPT:
 			/* retry timer is left untouched */
-			sta->plink_state = PLINK_OPN_RCVD;
+			sta->plink_state = NL80211_PLINK_OPN_RCVD;
 			sta->plid = plid;
 			llid = sta->llid;
 			spin_unlock_bh(&sta->lock);
@@ -660,7 +660,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 					    plid, 0);
 			break;
 		case CNF_ACPT:
-			sta->plink_state = PLINK_CNF_RCVD;
+			sta->plink_state = NL80211_PLINK_CNF_RCVD;
 			if (!mod_plink_timer(sta,
 					     dot11MeshConfirmTimeout(sdata)))
 				sta->ignore_plink_timer = true;
@@ -673,7 +673,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 		}
 		break;
 
-	case PLINK_OPN_RCVD:
+	case NL80211_PLINK_OPN_RCVD:
 		switch (event) {
 		case OPN_RJCT:
 		case CNF_RJCT:
@@ -682,7 +682,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			if (!reason)
 				reason = cpu_to_le16(MESH_CLOSE_RCVD);
 			sta->reason = reason;
-			sta->plink_state = PLINK_HOLDING;
+			sta->plink_state = NL80211_PLINK_HOLDING;
 			if (!mod_plink_timer(sta,
 					     dot11MeshHoldingTimeout(sdata)))
 				sta->ignore_plink_timer = true;
@@ -700,7 +700,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			break;
 		case CNF_ACPT:
 			del_timer(&sta->plink_timer);
-			sta->plink_state = PLINK_ESTAB;
+			sta->plink_state = NL80211_PLINK_ESTAB;
 			spin_unlock_bh(&sta->lock);
 			mesh_plink_inc_estab_count(sdata);
 			ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
@@ -713,7 +713,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 		}
 		break;
 
-	case PLINK_CNF_RCVD:
+	case NL80211_PLINK_CNF_RCVD:
 		switch (event) {
 		case OPN_RJCT:
 		case CNF_RJCT:
@@ -722,7 +722,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			if (!reason)
 				reason = cpu_to_le16(MESH_CLOSE_RCVD);
 			sta->reason = reason;
-			sta->plink_state = PLINK_HOLDING;
+			sta->plink_state = NL80211_PLINK_HOLDING;
 			if (!mod_plink_timer(sta,
 					     dot11MeshHoldingTimeout(sdata)))
 				sta->ignore_plink_timer = true;
@@ -734,7 +734,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			break;
 		case OPN_ACPT:
 			del_timer(&sta->plink_timer);
-			sta->plink_state = PLINK_ESTAB;
+			sta->plink_state = NL80211_PLINK_ESTAB;
 			spin_unlock_bh(&sta->lock);
 			mesh_plink_inc_estab_count(sdata);
 			ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
@@ -749,13 +749,13 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 		}
 		break;
 
-	case PLINK_ESTAB:
+	case NL80211_PLINK_ESTAB:
 		switch (event) {
 		case CLS_ACPT:
 			reason = cpu_to_le16(MESH_CLOSE_RCVD);
 			sta->reason = reason;
 			deactivated = __mesh_plink_deactivate(sta);
-			sta->plink_state = PLINK_HOLDING;
+			sta->plink_state = NL80211_PLINK_HOLDING;
 			llid = sta->llid;
 			mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata));
 			spin_unlock_bh(&sta->lock);
@@ -775,7 +775,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			break;
 		}
 		break;
-	case PLINK_HOLDING:
+	case NL80211_PLINK_HOLDING:
 		switch (event) {
 		case CLS_ACPT:
 			if (del_timer(&sta->plink_timer))
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 1b9413fb383..3a9515cb7ce 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -490,7 +490,7 @@ ieee80211_rx_mesh_check(struct ieee80211_rx_data *rx)
 	 * establisment frame, beacon or probe, drop the frame.
 	 */
 
-	if (!rx->sta || sta_plink_state(rx->sta) != PLINK_ESTAB) {
+	if (!rx->sta || sta_plink_state(rx->sta) != NL80211_PLINK_ESTAB) {
 		struct ieee80211_mgmt *mgmt;
 
 		if (!ieee80211_is_mgmt(hdr->frame_control))
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 82ab6b4643f..4a15f960356 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -277,7 +277,7 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
 #endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
 
 #ifdef CONFIG_MAC80211_MESH
-	sta->plink_state = PLINK_LISTEN;
+	sta->plink_state = NL80211_PLINK_LISTEN;
 	init_timer(&sta->plink_timer);
 #endif
 
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index d6b566076f0..c6ae8718bd5 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -318,7 +318,7 @@ struct sta_info {
 	u8 plink_retries;
 	bool ignore_plink_timer;
 	bool plink_timer_was_running;
-	enum plink_state plink_state;
+	enum nl80211_plink_state plink_state;
 	u32 plink_timeout;
 	struct timer_list plink_timer;
 #endif
@@ -336,12 +336,12 @@ struct sta_info {
 	struct ieee80211_sta sta;
 };
 
-static inline enum plink_state sta_plink_state(struct sta_info *sta)
+static inline enum nl80211_plink_state sta_plink_state(struct sta_info *sta)
 {
 #ifdef CONFIG_MAC80211_MESH
 	return sta->plink_state;
 #endif
-	return PLINK_LISTEN;
+	return NL80211_PLINK_LISTEN;
 }
 
 static inline void set_sta_flags(struct sta_info *sta, const u32 flags)
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index beac296b1fd..2222ce08ee9 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2335,7 +2335,7 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
 	memset(&params, 0, sizeof(params));
 
 	params.listen_interval = -1;
-	params.plink_state = PLINK_INVALID;
+	params.plink_state = -1;
 
 	if (info->attrs[NL80211_ATTR_STA_AID])
 		return -EINVAL;
-- 
cgit v1.2.3


From 8b3becadc82de3b87a5c196239db3fef6caa9c82 Mon Sep 17 00:00:00 2001
From: Yogesh Ashok Powar <yogeshp@marvell.com>
Date: Fri, 13 May 2011 11:22:31 -0700
Subject: cfg80211: make stripping of 802.11 header optional from AMSDU

Currently the devices that have already stripped IEEE 802.11
header from the AMSDU SKB can not use ieee80211_amsdu_to_8023s
routine. This patch enhances ieee80211_amsdu_to_8023s() API by
changing mandatory removing of IEEE 802.11 header from AMSDU
to optional.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwmc3200wifi/rx.c |  3 ++-
 include/net/cfg80211.h                 |  4 +++-
 net/mac80211/rx.c                      |  2 +-
 net/wireless/util.c                    | 21 +++++++++++++--------
 4 files changed, 19 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c
index 9a57cf6a488..5665a1a9b99 100644
--- a/drivers/net/wireless/iwmc3200wifi/rx.c
+++ b/drivers/net/wireless/iwmc3200wifi/rx.c
@@ -1576,7 +1576,8 @@ static void iwm_rx_process_amsdu(struct iwm_priv *iwm, struct sk_buff *skb)
 	IWM_HEXDUMP(iwm, DBG, RX, "A-MSDU: ", skb->data, skb->len);
 
 	__skb_queue_head_init(&list);
-	ieee80211_amsdu_to_8023s(skb, &list, ndev->dev_addr, wdev->iftype, 0);
+	ieee80211_amsdu_to_8023s(skb, &list, ndev->dev_addr, wdev->iftype, 0,
+									true);
 
 	while ((frame = __skb_dequeue(&list))) {
 		ndev->stats.rx_packets++;
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 0a2d795d35d..bfd6557946b 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2237,10 +2237,12 @@ int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr,
  * @addr: The device MAC address.
  * @iftype: The device interface type.
  * @extra_headroom: The hardware extra headroom for SKBs in the @list.
+ * @has_80211_header: Set it true if SKB is with IEEE 802.11 header.
  */
 void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list,
 			      const u8 *addr, enum nl80211_iftype iftype,
-			      const unsigned int extra_headroom);
+			      const unsigned int extra_headroom,
+			      bool has_80211_header);
 
 /**
  * cfg80211_classify8021d - determine the 802.1p/1d tag for a data frame
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 3a9515cb7ce..78c72a41d86 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1783,7 +1783,7 @@ ieee80211_rx_h_amsdu(struct ieee80211_rx_data *rx)
 
 	ieee80211_amsdu_to_8023s(skb, &frame_list, dev->dev_addr,
 				 rx->sdata->vif.type,
-				 rx->local->hw.extra_tx_headroom);
+				 rx->local->hw.extra_tx_headroom, true);
 
 	while (!skb_queue_empty(&frame_list)) {
 		rx->skb = __skb_dequeue(&frame_list);
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 95e4e254da0..f0536d44d43 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -544,7 +544,8 @@ EXPORT_SYMBOL(ieee80211_data_from_8023);
 
 void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list,
 			      const u8 *addr, enum nl80211_iftype iftype,
-			      const unsigned int extra_headroom)
+			      const unsigned int extra_headroom,
+			      bool has_80211_header)
 {
 	struct sk_buff *frame = NULL;
 	u16 ethertype;
@@ -553,14 +554,18 @@ void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list,
 	int remaining, err;
 	u8 dst[ETH_ALEN], src[ETH_ALEN];
 
-	err = ieee80211_data_to_8023(skb, addr, iftype);
-	if (err)
-		goto out;
+	if (has_80211_header) {
+		err = ieee80211_data_to_8023(skb, addr, iftype);
+		if (err)
+			goto out;
 
-	/* skip the wrapping header */
-	eth = (struct ethhdr *) skb_pull(skb, sizeof(struct ethhdr));
-	if (!eth)
-		goto out;
+		/* skip the wrapping header */
+		eth = (struct ethhdr *) skb_pull(skb, sizeof(struct ethhdr));
+		if (!eth)
+			goto out;
+	} else {
+		eth = (struct ethhdr *) skb->data;
+	}
 
 	while (skb != frame) {
 		u8 padding;
-- 
cgit v1.2.3


From 3b8ab88acaceb505aa06ef3bbf3a73b92470ae78 Mon Sep 17 00:00:00 2001
From: Yogesh Ashok Powar <yogeshp@marvell.com>
Date: Fri, 13 May 2011 11:22:32 -0700
Subject: mwifiex: use ieee80211_amsdu_to_8023s routine

mwifiex was using its own implementation of converting 802.11n
AMSDU to 802.3s.  This patch removes mwifiex specific
implementation and uses existing ieee80211_amsdu_to_8023s
routine.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/11n_aggr.c | 125 --------------------------------
 drivers/net/wireless/mwifiex/sta_rx.c   |  22 +++++-
 2 files changed, 20 insertions(+), 127 deletions(-)

diff --git a/drivers/net/wireless/mwifiex/11n_aggr.c b/drivers/net/wireless/mwifiex/11n_aggr.c
index 2b2cca5e6d0..d3d5e0853c4 100644
--- a/drivers/net/wireless/mwifiex/11n_aggr.c
+++ b/drivers/net/wireless/mwifiex/11n_aggr.c
@@ -135,131 +135,6 @@ mwifiex_11n_form_amsdu_txpd(struct mwifiex_private *priv,
 	}
 }
 
-/*
- * Counts the number of subframes in an aggregate packet.
- *
- * This function parses an aggregate packet buffer, looking for
- * subframes and counting the number of such subframe found. The
- * function automatically skips the DA/SA fields at the beginning
- * of each subframe and padding at the end.
- */
-static int
-mwifiex_11n_get_num_aggr_pkts(u8 *data, int total_pkt_len)
-{
-	int pkt_count = 0, pkt_len, pad;
-
-	while (total_pkt_len > 0) {
-		/* Length will be in network format, change it to host */
-		pkt_len = ntohs((*(__be16 *)(data + 2 * ETH_ALEN)));
-		pad = (((pkt_len + sizeof(struct ethhdr)) & 3)) ?
-			(4 - ((pkt_len + sizeof(struct ethhdr)) & 3)) : 0;
-		data += pkt_len + pad + sizeof(struct ethhdr);
-		total_pkt_len -= pkt_len + pad + sizeof(struct ethhdr);
-		++pkt_count;
-	}
-
-	return pkt_count;
-}
-
-/*
- * De-aggregate received packets.
- *
- * This function parses the received aggregate buffer, extracts each subframe,
- * strips off the SNAP header from them and sends the data portion for further
- * processing.
- *
- * Each subframe body is copied onto a separate buffer, which are freed by
- * upper layer after processing. The function also performs sanity tests on
- * the received buffer.
- */
-int mwifiex_11n_deaggregate_pkt(struct mwifiex_private *priv,
-				struct sk_buff *skb)
-{
-	u16 pkt_len;
-	int total_pkt_len;
-	u8 *data;
-	int pad;
-	struct mwifiex_rxinfo *rx_info = MWIFIEX_SKB_RXCB(skb);
-	struct rxpd *local_rx_pd = (struct rxpd *) skb->data;
-	struct sk_buff *skb_daggr;
-	struct mwifiex_rxinfo *rx_info_daggr;
-	int ret = -1;
-	struct rx_packet_hdr *rx_pkt_hdr;
-	struct mwifiex_adapter *adapter = priv->adapter;
-	u8 rfc1042_eth_hdr[ETH_ALEN] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
-
-	data = (u8 *) (local_rx_pd + local_rx_pd->rx_pkt_offset);
-	total_pkt_len = local_rx_pd->rx_pkt_length;
-
-	/* Sanity test */
-	if (total_pkt_len > MWIFIEX_RX_DATA_BUF_SIZE) {
-		dev_err(adapter->dev, "total pkt len greater than buffer"
-		       " size %d\n", total_pkt_len);
-		return -1;
-	}
-
-	rx_info->use_count = mwifiex_11n_get_num_aggr_pkts(data, total_pkt_len);
-
-	while (total_pkt_len > 0) {
-		rx_pkt_hdr = (struct rx_packet_hdr *) data;
-		/* Length will be in network format, change it to host */
-		pkt_len = ntohs((*(__be16 *) (data + 2 * ETH_ALEN)));
-		if (pkt_len > total_pkt_len) {
-			dev_err(adapter->dev, "pkt_len %d > total_pkt_len %d\n",
-			       total_pkt_len, pkt_len);
-			break;
-		}
-
-		pad = (((pkt_len + sizeof(struct ethhdr)) & 3)) ?
-			(4 - ((pkt_len + sizeof(struct ethhdr)) & 3)) : 0;
-
-		total_pkt_len -= pkt_len + pad + sizeof(struct ethhdr);
-
-		if (memcmp(&rx_pkt_hdr->rfc1042_hdr,
-			   rfc1042_eth_hdr, sizeof(rfc1042_eth_hdr)) == 0) {
-			memmove(data + LLC_SNAP_LEN, data, 2 * ETH_ALEN);
-			data += LLC_SNAP_LEN;
-			pkt_len += sizeof(struct ethhdr) - LLC_SNAP_LEN;
-		} else {
-			*(u16 *) (data + 2 * ETH_ALEN) = (u16) 0;
-			pkt_len += sizeof(struct ethhdr);
-		}
-
-		skb_daggr = dev_alloc_skb(pkt_len);
-		if (!skb_daggr) {
-			dev_err(adapter->dev, "%s: failed to alloc skb_daggr\n",
-			       __func__);
-			return -1;
-		}
-		rx_info_daggr = MWIFIEX_SKB_RXCB(skb_daggr);
-
-		rx_info_daggr->bss_index = rx_info->bss_index;
-		skb_daggr->tstamp = skb->tstamp;
-		rx_info_daggr->parent = skb;
-		skb_daggr->priority = skb->priority;
-		skb_put(skb_daggr, pkt_len);
-		memcpy(skb_daggr->data, data, pkt_len);
-
-		ret = mwifiex_recv_packet(adapter, skb_daggr);
-
-		switch (ret) {
-		case -EINPROGRESS:
-			break;
-		case -1:
-			dev_err(adapter->dev, "deaggr: host_to_card failed\n");
-		case 0:
-			mwifiex_recv_packet_complete(adapter, skb_daggr, ret);
-			break;
-		default:
-			break;
-		}
-
-		data += pkt_len + pad;
-	}
-
-	return ret;
-}
-
 /*
  * Create aggregated packet.
  *
diff --git a/drivers/net/wireless/mwifiex/sta_rx.c b/drivers/net/wireless/mwifiex/sta_rx.c
index e047f0d8a98..1fdddece747 100644
--- a/drivers/net/wireless/mwifiex/sta_rx.c
+++ b/drivers/net/wireless/mwifiex/sta_rx.c
@@ -141,10 +141,28 @@ int mwifiex_process_sta_rx_packet(struct mwifiex_adapter *adapter,
 		dev_kfree_skb_any(skb);
 		return ret;
 	}
+
 	if (local_rx_pd->rx_pkt_type == PKT_TYPE_AMSDU) {
-		mwifiex_11n_deaggregate_pkt(priv, skb);
-		return ret;
+		struct sk_buff_head list;
+		struct sk_buff *rx_skb;
+
+		__skb_queue_head_init(&list);
+
+		skb_pull(skb, local_rx_pd->rx_pkt_offset);
+		skb_trim(skb, local_rx_pd->rx_pkt_length);
+
+		ieee80211_amsdu_to_8023s(skb, &list, priv->curr_addr,
+				priv->wdev->iftype, 0, false);
+
+		while (!skb_queue_empty(&list)) {
+			rx_skb = __skb_dequeue(&list);
+			ret = mwifiex_recv_packet(adapter, rx_skb);
+			if (ret == -1)
+				dev_err(adapter->dev, "Rx of A-MSDU failed");
+		}
+		return 0;
 	}
+
 	/*
 	 * If the packet is not an unicast packet then send the packet
 	 * directly to os. Don't pass thru rx reordering
-- 
cgit v1.2.3