From fba43665360d361d338efd120a34ad615ca960d8 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Thu, 21 Sep 2006 17:26:34 +0400 Subject: POWERPC: Add cpm2 stuff support to the fsl_soc.c This patch contains necessary modifications to support the CPM2 SoC peripherals. For the time being, those are fs_enet Ethernet driver and cpm_uart serial. Written initially to support mpc8560, it also suites to the part of the large PQ2 (more specifically, mpc8260) family. Signed-off-by: Vitaly Bordug --- arch/powerpc/sysdev/fsl_soc.c | 268 +++++++++++++++++++++++++++++++++++++++++- arch/powerpc/sysdev/fsl_soc.h | 2 + 2 files changed, 265 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 92ba378b799..0ed2aaee105 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -3,6 +3,9 @@ * * Maintained by Kumar Gala (see MAINTAINERS for contact information) * + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -20,14 +23,18 @@ #include #include #include +#include +#include #include #include #include #include +#include #include #include #include +#include static phys_addr_t immrbase = -1; @@ -42,7 +49,9 @@ phys_addr_t get_immrbase(void) if (soc) { unsigned int size; const void *prop = get_property(soc, "reg", &size); - immrbase = of_translate_address(soc, prop); + + if (prop) + immrbase = of_translate_address(soc, prop); of_node_put(soc); }; @@ -51,6 +60,59 @@ phys_addr_t get_immrbase(void) EXPORT_SYMBOL(get_immrbase); +#ifdef CONFIG_CPM2 + +static u32 brgfreq = -1; + +u32 get_brgfreq(void) +{ + struct device_node *node; + + if (brgfreq != -1) + return brgfreq; + + node = of_find_node_by_type(NULL, "cpm"); + if (node) { + unsigned int size; + const unsigned int *prop = get_property(node, "brg-frequency", + &size); + + if (prop) + brgfreq = *prop; + of_node_put(node); + }; + + return brgfreq; +} + +EXPORT_SYMBOL(get_brgfreq); + +static u32 fs_baudrate = -1; + +u32 get_baudrate(void) +{ + struct device_node *node; + + if (fs_baudrate != -1) + return fs_baudrate; + + node = of_find_node_by_type(NULL, "serial"); + if (node) { + unsigned int size; + const unsigned int *prop = get_property(node, "current-speed", + &size); + + if (prop) + fs_baudrate = *prop; + of_node_put(node); + }; + + return fs_baudrate; +} + +EXPORT_SYMBOL(get_baudrate); +#endif /* CONFIG_CPM2 */ + static int __init gfar_mdio_of_init(void) { struct device_node *np; @@ -85,8 +147,11 @@ static int __init gfar_mdio_of_init(void) mdio_data.irq[k] = -1; while ((child = of_get_next_child(np, child)) != NULL) { - const u32 *id = get_property(child, "reg", NULL); - mdio_data.irq[*id] = irq_of_parse_and_map(child, 0); + int irq = irq_of_parse_and_map(child, 0); + if (irq != NO_IRQ) { + const u32 *id = get_property(child, "reg", NULL); + mdio_data.irq[*id] = irq; + } } ret = @@ -128,7 +193,7 @@ static int __init gfar_of_init(void) const char *model; const void *mac_addr; const phandle *ph; - int n_res = 1; + int n_res = 2; memset(r, 0, sizeof(r)); memset(&gfar_data, 0, sizeof(gfar_data)); @@ -159,7 +224,7 @@ static int __init gfar_of_init(void) gfar_dev = platform_device_register_simple("fsl-gianfar", i, &r[0], - n_res + 1); + n_res); if (IS_ERR(gfar_dev)) { ret = PTR_ERR(gfar_dev); @@ -478,3 +543,196 @@ err: } arch_initcall(fsl_usb_of_init); + +#ifdef CONFIG_CPM2 + +static const char fcc_regs[] = "fcc_regs"; +static const char fcc_regs_c[] = "fcc_regs_c"; +static const char fcc_pram[] = "fcc_pram"; +static char bus_id[9][BUS_ID_SIZE]; + +static int __init fs_enet_of_init(void) +{ + struct device_node *np; + unsigned int i; + struct platform_device *fs_enet_dev; + struct resource res; + int ret; + + for (np = NULL, i = 0; + (np = of_find_compatible_node(np, "network", "fs_enet")) != NULL; + i++) { + struct resource r[4]; + struct device_node *phy, *mdio; + struct fs_platform_info fs_enet_data; + const unsigned int *id, *phy_addr; + const void *mac_addr; + const phandle *ph; + const char *model; + + memset(r, 0, sizeof(r)); + memset(&fs_enet_data, 0, sizeof(fs_enet_data)); + + ret = of_address_to_resource(np, 0, &r[0]); + if (ret) + goto err; + r[0].name = fcc_regs; + + ret = of_address_to_resource(np, 1, &r[1]); + if (ret) + goto err; + r[1].name = fcc_pram; + + ret = of_address_to_resource(np, 2, &r[2]); + if (ret) + goto err; + r[2].name = fcc_regs_c; + + r[3].start = r[3].end = irq_of_parse_and_map(np, 0); + r[3].flags = IORESOURCE_IRQ; + + fs_enet_dev = + platform_device_register_simple("fsl-cpm-fcc", i, &r[0], 4); + + if (IS_ERR(fs_enet_dev)) { + ret = PTR_ERR(fs_enet_dev); + goto err; + } + + model = get_property(np, "model", NULL); + if (model == NULL) { + ret = -ENODEV; + goto unreg; + } + + mac_addr = get_property(np, "mac-address", NULL); + memcpy(fs_enet_data.macaddr, mac_addr, 6); + + ph = get_property(np, "phy-handle", NULL); + phy = of_find_node_by_phandle(*ph); + + if (phy == NULL) { + ret = -ENODEV; + goto unreg; + } + + phy_addr = get_property(phy, "reg", NULL); + fs_enet_data.phy_addr = *phy_addr; + + id = get_property(np, "device-id", NULL); + fs_enet_data.fs_no = *id; + + mdio = of_get_parent(phy); + ret = of_address_to_resource(mdio, 0, &res); + if (ret) { + of_node_put(phy); + of_node_put(mdio); + goto unreg; + } + + if (strstr(model, "FCC")) { + int fcc_index = fs_get_fcc_index(*id); + + fs_enet_data.dpram_offset = (u32)cpm2_immr->im_dprambase; + fs_enet_data.rx_ring = 32; + fs_enet_data.tx_ring = 32; + fs_enet_data.rx_copybreak = 240; + fs_enet_data.use_napi = 0; + fs_enet_data.napi_weight = 17; + fs_enet_data.mem_offset = FCC_MEM_OFFSET(fcc_index); + fs_enet_data.cp_page = CPM_CR_FCC_PAGE(fcc_index); + fs_enet_data.cp_block = CPM_CR_FCC_SBLOCK(fcc_index); + + snprintf((char*)&bus_id[(*id)], BUS_ID_SIZE, "%x:%02x", + (u32)res.start, fs_enet_data.phy_addr); + fs_enet_data.bus_id = (char*)&bus_id[(*id)]; + } + + of_node_put(phy); + of_node_put(mdio); + + ret = platform_device_add_data(fs_enet_dev, &fs_enet_data, + sizeof(struct + fs_platform_info)); + if (ret) + goto unreg; + } + return 0; + +unreg: + platform_device_unregister(fs_enet_dev); +err: + return ret; +} + +arch_initcall(fs_enet_of_init); + +static const char scc_regs[] = "regs"; +static const char scc_pram[] = "pram"; + +static int __init cpm_uart_of_init(void) +{ + struct device_node *np; + unsigned int i; + struct platform_device *cpm_uart_dev; + int ret; + + for (np = NULL, i = 0; + (np = of_find_compatible_node(np, "serial", "cpm_uart")) != NULL; + i++) { + struct resource r[3]; + struct fs_uart_platform_info cpm_uart_data; + const int *id; + + memset(r, 0, sizeof(r)); + memset(&cpm_uart_data, 0, sizeof(cpm_uart_data)); + + ret = of_address_to_resource(np, 0, &r[0]); + if (ret) + goto err; + + r[0].name = scc_regs; + + ret = of_address_to_resource(np, 1, &r[1]); + if (ret) + goto err; + r[1].name = scc_pram; + + r[2].start = r[2].end = irq_of_parse_and_map(np, 0); + r[2].flags = IORESOURCE_IRQ; + + cpm_uart_dev = + platform_device_register_simple("fsl-cpm-scc:uart", i, &r[0], 3); + + if (IS_ERR(cpm_uart_dev)) { + ret = PTR_ERR(cpm_uart_dev); + goto err; + } + + id = get_property(np, "device-id", NULL); + cpm_uart_data.fs_no = *id; + cpm_uart_data.uart_clk = ppc_proc_freq; + + cpm_uart_data.tx_num_fifo = 4; + cpm_uart_data.tx_buf_size = 32; + cpm_uart_data.rx_num_fifo = 4; + cpm_uart_data.rx_buf_size = 32; + + ret = + platform_device_add_data(cpm_uart_dev, &cpm_uart_data, + sizeof(struct + fs_uart_platform_info)); + if (ret) + goto unreg; + } + + return 0; + +unreg: + platform_device_unregister(cpm_uart_dev); +err: + return ret; +} + +arch_initcall(cpm_uart_of_init); +#endif /* CONFIG_CPM2 */ diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h index c433d3f39ed..25230ceffbc 100644 --- a/arch/powerpc/sysdev/fsl_soc.h +++ b/arch/powerpc/sysdev/fsl_soc.h @@ -3,6 +3,8 @@ #ifdef __KERNEL__ extern phys_addr_t get_immrbase(void); +extern u32 get_brgfreq(void); +extern u32 get_baudrate(void); #endif #endif -- cgit v1.2.3 From 3dd0dcbe9dc5c116df96989c42a062951b644e04 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Thu, 21 Sep 2006 17:27:15 +0400 Subject: cpm_uart: make it possible to utilize from powerpc Driver core has been updated to make use of the new powerpc OF-inspired platform devices, yet keeping compatibility to the vast board list from ppc. Signed-off-by: Vitaly Bordug --- drivers/serial/cpm_uart/cpm_uart_core.c | 11 ++++------- drivers/serial/cpm_uart/cpm_uart_cpm2.c | 13 +++++++------ include/asm-powerpc/fs_pd.h | 27 +++++++++++++++++++++++++++ include/asm-ppc/fs_pd.h | 32 ++++++++++++++++++++++++++++++++ 4 files changed, 70 insertions(+), 13 deletions(-) create mode 100644 include/asm-powerpc/fs_pd.h create mode 100644 include/asm-ppc/fs_pd.h diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index 90ff96e3339..dfa06b64495 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -46,6 +46,7 @@ #include #include #include +#include #if defined(CONFIG_SERIAL_CPM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ @@ -1044,11 +1045,11 @@ int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con) if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs"))) return -EINVAL; - mem = r->start; + mem = (u32)ioremap(r->start, r->end - r->start + 1); if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pram"))) return -EINVAL; - pram = r->start; + pram = (u32)ioremap(r->start, r->end - r->start + 1); if(idx > fsid_smc2_uart) { pinfo->sccp = (scc_t *)mem; @@ -1189,11 +1190,7 @@ static int __init cpm_uart_console_setup(struct console *co, char *options) if (options) { uart_parse_options(options, &baud, &parity, &bits, &flow); } else { - bd_t *bd = (bd_t *) __res; - - if (bd->bi_baudrate) - baud = bd->bi_baudrate; - else + if ((baud = uart_baudrate()) == -1) baud = 9600; } diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c index ef3bb476c43..02b9ef9abd3 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c @@ -40,6 +40,7 @@ #include #include +#include #include #include @@ -266,7 +267,7 @@ int cpm_uart_init_portdesc(void) (unsigned long)&cpm2_immr->im_smc[0]; cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX); cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); - cpm_uart_ports[UART_SMC1].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_ports[UART_SMC1].port.uartclk = uart_clock(); cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1; #endif @@ -279,7 +280,7 @@ int cpm_uart_init_portdesc(void) (unsigned long)&cpm2_immr->im_smc[1]; cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX); cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); - cpm_uart_ports[UART_SMC2].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_ports[UART_SMC2].port.uartclk = uart_clock(); cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2; #endif @@ -293,7 +294,7 @@ int cpm_uart_init_portdesc(void) ~(UART_SCCM_TX | UART_SCCM_RX); cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); - cpm_uart_ports[UART_SCC1].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_ports[UART_SCC1].port.uartclk = uart_clock(); cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1; #endif @@ -307,7 +308,7 @@ int cpm_uart_init_portdesc(void) ~(UART_SCCM_TX | UART_SCCM_RX); cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); - cpm_uart_ports[UART_SCC2].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_ports[UART_SCC2].port.uartclk = uart_clock(); cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2; #endif @@ -321,7 +322,7 @@ int cpm_uart_init_portdesc(void) ~(UART_SCCM_TX | UART_SCCM_RX); cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); - cpm_uart_ports[UART_SCC3].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_ports[UART_SCC3].port.uartclk = uart_clock(); cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3; #endif @@ -335,7 +336,7 @@ int cpm_uart_init_portdesc(void) ~(UART_SCCM_TX | UART_SCCM_RX); cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); - cpm_uart_ports[UART_SCC4].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_ports[UART_SCC4].port.uartclk = uart_clock(); cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4; #endif diff --git a/include/asm-powerpc/fs_pd.h b/include/asm-powerpc/fs_pd.h new file mode 100644 index 00000000000..d530f68b4ee --- /dev/null +++ b/include/asm-powerpc/fs_pd.h @@ -0,0 +1,27 @@ +/* + * Platform information definitions. + * + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef FS_PD_H +#define FS_PD_H +#include +#include + +static inline int uart_baudrate(void) +{ + return get_baudrate(); +} + +static inline int uart_clock(void) +{ + return ppc_proc_freq; +} + +#endif diff --git a/include/asm-ppc/fs_pd.h b/include/asm-ppc/fs_pd.h new file mode 100644 index 00000000000..eed77783412 --- /dev/null +++ b/include/asm-ppc/fs_pd.h @@ -0,0 +1,32 @@ +/* + * Platform information definitions. + * + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef FS_PD_H +#define FS_PD_H + +static inline int uart_baudrate(void) +{ + int baud; + bd_t *bd = (bd_t *) __res; + + if (bd->bi_baudrate) + baud = bd->bi_baudrate; + else + baud = -1; + return baud; +} + +static inline int uart_clock(void) +{ + return (((bd_t *) __res)->bi_intfreq); +} + +#endif -- cgit v1.2.3 From b0c110b4f19b226dcc9f7805759bf17f8ef4dca4 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Thu, 21 Sep 2006 22:18:53 +0400 Subject: POWERPC: Move generic cpm2 stuff to powerpc This moves the cpm2 common code and PIC stuff to the powerpc. Most of the files were just copied from ppc/, with minor tuning to make it compile, and, subsequently, work. Signed-off-by: Vitaly Bordug --- arch/powerpc/lib/Makefile | 5 + arch/powerpc/sysdev/Makefile | 5 + arch/powerpc/sysdev/cpm2_common.c | 210 +++++++++++++++++++++++++++++++ arch/powerpc/sysdev/cpm2_pic.c | 256 ++++++++++++++++++++++++++++++++++++++ arch/powerpc/sysdev/cpm2_pic.h | 8 ++ include/asm-ppc/cpm2.h | 6 +- 6 files changed, 489 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/sysdev/cpm2_common.c create mode 100644 arch/powerpc/sysdev/cpm2_pic.c create mode 100644 arch/powerpc/sysdev/cpm2_pic.h diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 336dd191f76..8030f6245d8 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -20,3 +20,8 @@ ifeq ($(CONFIG_PPC64),y) obj-$(CONFIG_SMP) += locks.o obj-$(CONFIG_DEBUG_KERNEL) += sstep.o endif + +# Temporary hack until we have migrated to asm-powerpc +ifeq ($(CONFIG_PPC_MERGE),y) +obj-$(CONFIG_CPM2) += rheap.o +endif diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index e5e999ea891..f15f4d78aee 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -17,3 +17,8 @@ ifeq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_PPC_I8259) += i8259.o obj-$(CONFIG_PPC_83xx) += ipic.o endif + +# Temporary hack until we have migrated to asm-powerpc +ifeq ($(ARCH),powerpc) +obj-$(CONFIG_CPM2) += cpm2_common.o cpm2_pic.o +endif diff --git a/arch/powerpc/sysdev/cpm2_common.c b/arch/powerpc/sysdev/cpm2_common.c new file mode 100644 index 00000000000..f7a04892400 --- /dev/null +++ b/arch/powerpc/sysdev/cpm2_common.c @@ -0,0 +1,210 @@ +/* + * General Purpose functions for the global management of the + * 8260 Communication Processor Module. + * Copyright (c) 1999-2001 Dan Malek + * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com) + * 2.3.99 Updates + * + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug + * Merged to arch/powerpc from arch/ppc/syslib/cpm2_common.c + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/* + * + * In addition to the individual control of the communication + * channels, there are a few functions that globally affect the + * communication processor. + * + * Buffer descriptors must be allocated from the dual ported memory + * space. The allocator for that is here. When the communication + * process is reset, we reclaim the memory available. There is + * currently no deallocator for this memory. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +static void cpm2_dpinit(void); +cpm_cpm2_t *cpmp; /* Pointer to comm processor space */ + +/* We allocate this here because it is used almost exclusively for + * the communication processor devices. + */ +cpm2_map_t *cpm2_immr; + +#define CPM_MAP_SIZE (0x40000) /* 256k - the PQ3 reserve this amount + of space for CPM as it is larger + than on PQ2 */ + +void +cpm2_reset(void) +{ + cpm2_immr = (cpm2_map_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE); + + /* Reclaim the DP memory for our use. + */ + cpm2_dpinit(); + + /* Tell everyone where the comm processor resides. + */ + cpmp = &cpm2_immr->im_cpm; +} + +/* Set a baud rate generator. This needs lots of work. There are + * eight BRGs, which can be connected to the CPM channels or output + * as clocks. The BRGs are in two different block of internal + * memory mapped space. + * The baud rate clock is the system clock divided by something. + * It was set up long ago during the initial boot phase and is + * is given to us. + * Baud rate clocks are zero-based in the driver code (as that maps + * to port numbers). Documentation uses 1-based numbering. + */ +#define BRG_INT_CLK (get_brgfreq()) +#define BRG_UART_CLK (BRG_INT_CLK/16) + +/* This function is used by UARTS, or anything else that uses a 16x + * oversampled clock. + */ +void +cpm_setbrg(uint brg, uint rate) +{ + volatile uint *bp; + + /* This is good enough to get SMCs running..... + */ + if (brg < 4) { + bp = (uint *)&cpm2_immr->im_brgc1; + } else { + bp = (uint *)&cpm2_immr->im_brgc5; + brg -= 4; + } + bp += brg; + *bp = ((BRG_UART_CLK / rate) << 1) | CPM_BRG_EN; +} + +/* This function is used to set high speed synchronous baud rate + * clocks. + */ +void +cpm2_fastbrg(uint brg, uint rate, int div16) +{ + volatile uint *bp; + + if (brg < 4) { + bp = (uint *)&cpm2_immr->im_brgc1; + } + else { + bp = (uint *)&cpm2_immr->im_brgc5; + brg -= 4; + } + bp += brg; + *bp = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN; + if (div16) + *bp |= CPM_BRG_DIV16; +} + +/* + * dpalloc / dpfree bits. + */ +static spinlock_t cpm_dpmem_lock; +/* 16 blocks should be enough to satisfy all requests + * until the memory subsystem goes up... */ +static rh_block_t cpm_boot_dpmem_rh_block[16]; +static rh_info_t cpm_dpmem_info; + +static void cpm2_dpinit(void) +{ + spin_lock_init(&cpm_dpmem_lock); + + /* initialize the info header */ + rh_init(&cpm_dpmem_info, 1, + sizeof(cpm_boot_dpmem_rh_block) / + sizeof(cpm_boot_dpmem_rh_block[0]), + cpm_boot_dpmem_rh_block); + + /* Attach the usable dpmem area */ + /* XXX: This is actually crap. CPM_DATAONLY_BASE and + * CPM_DATAONLY_SIZE is only a subset of the available dpram. It + * varies with the processor and the microcode patches activated. + * But the following should be at least safe. + */ + rh_attach_region(&cpm_dpmem_info, (void *)CPM_DATAONLY_BASE, + CPM_DATAONLY_SIZE); +} + +/* This function returns an index into the DPRAM area. + */ +uint cpm_dpalloc(uint size, uint align) +{ + void *start; + unsigned long flags; + + spin_lock_irqsave(&cpm_dpmem_lock, flags); + cpm_dpmem_info.alignment = align; + start = rh_alloc(&cpm_dpmem_info, size, "commproc"); + spin_unlock_irqrestore(&cpm_dpmem_lock, flags); + + return (uint)start; +} +EXPORT_SYMBOL(cpm_dpalloc); + +int cpm_dpfree(uint offset) +{ + int ret; + unsigned long flags; + + spin_lock_irqsave(&cpm_dpmem_lock, flags); + ret = rh_free(&cpm_dpmem_info, (void *)offset); + spin_unlock_irqrestore(&cpm_dpmem_lock, flags); + + return ret; +} +EXPORT_SYMBOL(cpm_dpfree); + +/* not sure if this is ever needed */ +uint cpm_dpalloc_fixed(uint offset, uint size, uint align) +{ + void *start; + unsigned long flags; + + spin_lock_irqsave(&cpm_dpmem_lock, flags); + cpm_dpmem_info.alignment = align; + start = rh_alloc_fixed(&cpm_dpmem_info, (void *)offset, size, "commproc"); + spin_unlock_irqrestore(&cpm_dpmem_lock, flags); + + return (uint)start; +} +EXPORT_SYMBOL(cpm_dpalloc_fixed); + +void cpm_dpdump(void) +{ + rh_dump(&cpm_dpmem_info); +} +EXPORT_SYMBOL(cpm_dpdump); + +void *cpm_dpram_addr(uint offset) +{ + return (void *)&cpm2_immr->im_dprambase[offset]; +} +EXPORT_SYMBOL(cpm_dpram_addr); diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c new file mode 100644 index 00000000000..c804475c07d --- /dev/null +++ b/arch/powerpc/sysdev/cpm2_pic.c @@ -0,0 +1,256 @@ +/* + * Platform information definitions. + * + * Copied from arch/ppc/syslib/cpm2_pic.c with minor subsequent updates + * to make in work in arch/powerpc/. Original (c) belongs to Dan Malek. + * + * Author: Vitaly Bordug + * + * 1999-2001 (c) Dan Malek + * 2006 (c) MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/* The CPM2 internal interrupt controller. It is usually + * the only interrupt controller. + * There are two 32-bit registers (high/low) for up to 64 + * possible interrupts. + * + * Now, the fun starts.....Interrupt Numbers DO NOT MAP + * in a simple arithmetic fashion to mask or pending registers. + * That is, interrupt 4 does not map to bit position 4. + * We create two tables, indexed by vector number, to indicate + * which register to use and which bit in the register to use. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "cpm2_pic.h" + +static struct device_node *cpm2_pic_node; +static struct irq_host *cpm2_pic_host; +#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) +static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; + +static const u_char irq_to_siureg[] = { + 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0 +}; + +/* bit numbers do not match the docs, these are precomputed so the bit for + * a given irq is (1 << irq_to_siubit[irq]) */ +static const u_char irq_to_siubit[] = { + 0, 15, 14, 13, 12, 11, 10, 9, + 8, 7, 6, 5, 4, 3, 2, 1, + 2, 1, 0, 14, 13, 12, 11, 10, + 9, 8, 7, 6, 5, 4, 3, 0, + 31, 30, 29, 28, 27, 26, 25, 24, + 23, 22, 21, 20, 19, 18, 17, 16, + 16, 17, 18, 19, 20, 21, 22, 23, + 24, 25, 26, 27, 28, 29, 30, 31, +}; + +static void cpm2_mask_irq(unsigned int irq_nr) +{ + int bit, word; + volatile uint *simr; + + irq_nr -= CPM_IRQ_OFFSET; + + bit = irq_to_siubit[irq_nr]; + word = irq_to_siureg[irq_nr]; + + simr = &(cpm2_immr->im_intctl.ic_simrh); + ppc_cached_irq_mask[word] &= ~(1 << bit); + simr[word] = ppc_cached_irq_mask[word]; +} + +static void cpm2_unmask_irq(unsigned int irq_nr) +{ + int bit, word; + volatile uint *simr; + + irq_nr -= CPM_IRQ_OFFSET; + + bit = irq_to_siubit[irq_nr]; + word = irq_to_siureg[irq_nr]; + + simr = &(cpm2_immr->im_intctl.ic_simrh); + ppc_cached_irq_mask[word] |= 1 << bit; + simr[word] = ppc_cached_irq_mask[word]; +} + +static void cpm2_mask_and_ack(unsigned int irq_nr) +{ + int bit, word; + volatile uint *simr, *sipnr; + + irq_nr -= CPM_IRQ_OFFSET; + + bit = irq_to_siubit[irq_nr]; + word = irq_to_siureg[irq_nr]; + + simr = &(cpm2_immr->im_intctl.ic_simrh); + sipnr = &(cpm2_immr->im_intctl.ic_sipnrh); + ppc_cached_irq_mask[word] &= ~(1 << bit); + simr[word] = ppc_cached_irq_mask[word]; + sipnr[word] = 1 << bit; +} + +static void cpm2_end_irq(unsigned int irq_nr) +{ + int bit, word; + volatile uint *simr; + + if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS)) + && irq_desc[irq_nr].action) { + + irq_nr -= CPM_IRQ_OFFSET; + bit = irq_to_siubit[irq_nr]; + word = irq_to_siureg[irq_nr]; + + simr = &(cpm2_immr->im_intctl.ic_simrh); + ppc_cached_irq_mask[word] |= 1 << bit; + simr[word] = ppc_cached_irq_mask[word]; + /* + * Work around large numbers of spurious IRQs on PowerPC 82xx + * systems. + */ + mb(); + } +} + +static struct irq_chip cpm2_pic = { + .typename = " CPM2 SIU ", + .enable = cpm2_unmask_irq, + .disable = cpm2_mask_irq, + .unmask = cpm2_unmask_irq, + .mask_ack = cpm2_mask_and_ack, + .end = cpm2_end_irq, +}; + +int cpm2_get_irq(struct pt_regs *regs) +{ + int irq; + unsigned long bits; + + /* For CPM2, read the SIVEC register and shift the bits down + * to get the irq number.*/ + bits = cpm2_immr->im_intctl.ic_sivec; + irq = bits >> 26; + + if (irq == 0) + return(-1); + return irq+CPM_IRQ_OFFSET; +} + +static int cpm2_pic_host_match(struct irq_host *h, struct device_node *node) +{ + return cpm2_pic_node == NULL || cpm2_pic_node == node; +} + +static int cpm2_pic_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + pr_debug("cpm2_pic_host_map(%d, 0x%lx)\n", virq, hw); + + get_irq_desc(virq)->status |= IRQ_LEVEL; + set_irq_chip_and_handler(virq, &cpm2_pic, handle_level_irq); + return 0; +} + +static void cpm2_host_unmap(struct irq_host *h, unsigned int virq) +{ + /* Make sure irq is masked in hardware */ + cpm2_mask_irq(virq); + + /* remove chip and handler */ + set_irq_chip_and_handler(virq, NULL, NULL); +} + +static int cpm2_pic_host_xlate(struct irq_host *h, struct device_node *ct, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_flags) +{ + static const unsigned char map_cpm2_senses[4] = { + IRQ_TYPE_LEVEL_LOW, + IRQ_TYPE_LEVEL_HIGH, + IRQ_TYPE_EDGE_FALLING, + IRQ_TYPE_EDGE_RISING, + }; + + *out_hwirq = intspec[0]; + if (intsize > 1 && intspec[1] < 4) + *out_flags = map_cpm2_senses[intspec[1]]; + else + *out_flags = IRQ_TYPE_NONE; + + return 0; +} + +static struct irq_host_ops cpm2_pic_host_ops = { + .match = cpm2_pic_host_match, + .map = cpm2_pic_host_map, + .unmap = cpm2_host_unmap, + .xlate = cpm2_pic_host_xlate, +}; + +void cpm2_pic_init(struct device_node *node) +{ + int i; + + /* Clear the CPM IRQ controller, in case it has any bits set + * from the bootloader + */ + + /* Mask out everything */ + + cpm2_immr->im_intctl.ic_simrh = 0x00000000; + cpm2_immr->im_intctl.ic_simrl = 0x00000000; + + wmb(); + + /* Ack everything */ + cpm2_immr->im_intctl.ic_sipnrh = 0xffffffff; + cpm2_immr->im_intctl.ic_sipnrl = 0xffffffff; + wmb(); + + /* Dummy read of the vector */ + i = cpm2_immr->im_intctl.ic_sivec; + rmb(); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + cpm2_immr->im_intctl.ic_sicr = 0; + cpm2_immr->im_intctl.ic_scprrh = 0x05309770; + cpm2_immr->im_intctl.ic_scprrl = 0x05309770; + + /* create a legacy host */ + if (node) + cpm2_pic_node = of_node_get(node); + + cpm2_pic_host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, 64, &cpm2_pic_host_ops, 64); + if (cpm2_pic_host == NULL) { + printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n"); + return; + } +} diff --git a/arch/powerpc/sysdev/cpm2_pic.h b/arch/powerpc/sysdev/cpm2_pic.h new file mode 100644 index 00000000000..436cca77db6 --- /dev/null +++ b/arch/powerpc/sysdev/cpm2_pic.h @@ -0,0 +1,8 @@ +#ifndef _PPC_KERNEL_CPM2_H +#define _PPC_KERNEL_CPM2_H + +extern int cpm2_get_irq(struct pt_regs *regs); + +extern void cpm2_pic_init(struct device_node*); + +#endif /* _PPC_KERNEL_CPM2_H */ diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h index f6a7ff04ffe..876974e5412 100644 --- a/include/asm-ppc/cpm2.h +++ b/include/asm-ppc/cpm2.h @@ -42,6 +42,8 @@ #define CPM_CR_IDMA4_SBLOCK (0x17) #define CPM_CR_MCC1_SBLOCK (0x1c) +#define CPM_CR_FCC_SBLOCK(x) (x + 0x10) + #define CPM_CR_SCC1_PAGE (0x00) #define CPM_CR_SCC2_PAGE (0x01) #define CPM_CR_SCC3_PAGE (0x02) @@ -62,6 +64,8 @@ #define CPM_CR_MCC1_PAGE (0x07) #define CPM_CR_MCC2_PAGE (0x08) +#define CPM_CR_FCC_PAGE(x) (x + 0x04) + /* Some opcodes (there are more...later) */ #define CPM_CR_INIT_TRX ((ushort)0x0000) @@ -1186,7 +1190,7 @@ typedef struct im_idma { #define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128)) #define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0) #define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1) -#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(2) +#define FCC3_MEM_OFFSET FCC_MEM_OFFSET(2) #endif /* __CPM2__ */ #endif /* __KERNEL__ */ -- cgit v1.2.3 From 902f392d011d0a781ea4695c464345faa6664540 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Thu, 21 Sep 2006 22:31:26 +0400 Subject: POWERPC: Add support for the mpc8560 eval board This makes the 8560 evaluation board fully supported under arch/powerpc, as the first board with CPM2 SoC peripherals. The brand new devicetree nodes are introduced (intending to be a subset of the QuiccEngine-equipped models, with dts sources placed into the kernel according to the new convention. Assuming all the preceding stuff applied (PAL+fs_enet related+ CPM_UART update), the both TSEC eth ,FCC Eths, and both SCC UARTs are working. The relevant drivers are still capable to drive users in ppc, which was verified with 8272ADS (SCC uart+FCC eth). This is also verified on mpc8540 and actually make it work (PCI stuff working as well) Signed-off-by: Vitaly Bordug --- arch/powerpc/boot/dts/mpc8560ads.dts | 302 ++++++++++ arch/powerpc/configs/mpc8560_ads_defconfig | 854 +++++++++++++++++++++++++++++ arch/powerpc/platforms/85xx/Kconfig | 21 + arch/powerpc/platforms/85xx/Makefile | 1 + arch/powerpc/platforms/85xx/mpc85xx_ads.c | 109 ++++ arch/powerpc/platforms/85xx/mpc85xx_ads.h | 61 +++ include/asm-powerpc/mpc85xx.h | 53 ++ 7 files changed, 1401 insertions(+) create mode 100644 arch/powerpc/boot/dts/mpc8560ads.dts create mode 100644 arch/powerpc/configs/mpc8560_ads_defconfig create mode 100644 arch/powerpc/platforms/85xx/mpc85xx_ads.h create mode 100644 include/asm-powerpc/mpc85xx.h diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts new file mode 100644 index 00000000000..ba5c943a6fe --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -0,0 +1,302 @@ +/* + * MPC8560 ADS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC8560ADS"; + compatible = "MPC85xxADS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8560@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <04ead9a0>; + bus-frequency = <13ab6680>; + clock-frequency = <312c8040>; + 32-bit; + linux,phandle = <201>; + linux,boot-cpu; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 10000000>; + }; + + soc8560@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; + bus-frequency = <13ab6680>; + + mdio@24520 { + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + #address-cells = <1>; + #size-cells = <0>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <35 1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <35 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + ethernet-phy@2 { + linux,phandle = <2452002>; + interrupt-parent = <40000>; + interrupts = <37 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + ethernet-phy@3 { + linux,phandle = <2452003>; + interrupt-parent = <40000>; + interrupts = <37 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + address = [ 00 00 0C 00 00 FD ]; + interrupts = ; + interrupt-parent = <40000>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + address = [ 00 00 0C 00 01 FD ]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + + pci@8000 { + linux,phandle = <8000>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "85xx"; + device_type = "pci"; + reg = <8000 400>; + clock-frequency = <3f940aa>; + interrupt-map-mask = ; + interrupt-map = < + + /* IDSEL 0x2 */ + 1000 0 0 1 40000 31 1 + 1000 0 0 2 40000 32 1 + 1000 0 0 3 40000 33 1 + 1000 0 0 4 40000 34 1 + + /* IDSEL 0x3 */ + 1800 0 0 1 40000 34 1 + 1800 0 0 2 40000 31 1 + 1800 0 0 3 40000 32 1 + 1800 0 0 4 40000 33 1 + + /* IDSEL 0x4 */ + 2000 0 0 1 40000 33 1 + 2000 0 0 2 40000 34 1 + 2000 0 0 3 40000 31 1 + 2000 0 0 4 40000 32 1 + + /* IDSEL 0x5 */ + 2800 0 0 1 40000 32 1 + 2800 0 0 2 40000 33 1 + 2800 0 0 3 40000 34 1 + 2800 0 0 4 40000 31 1 + + /* IDSEL 12 */ + 6000 0 0 1 40000 31 1 + 6000 0 0 2 40000 32 1 + 6000 0 0 3 40000 33 1 + 6000 0 0 4 40000 34 1 + + /* IDSEL 13 */ + 6800 0 0 1 40000 34 1 + 6800 0 0 2 40000 31 1 + 6800 0 0 3 40000 32 1 + 6800 0 0 4 40000 33 1 + + /* IDSEL 14*/ + 7000 0 0 1 40000 33 1 + 7000 0 0 2 40000 34 1 + 7000 0 0 3 40000 31 1 + 7000 0 0 4 40000 32 1 + + /* IDSEL 15 */ + 7800 0 0 1 40000 32 1 + 7800 0 0 2 40000 33 1 + 7800 0 0 3 40000 34 1 + 7800 0 0 4 40000 31 1 + + /* IDSEL 18 */ + 9000 0 0 1 40000 31 1 + 9000 0 0 2 40000 32 1 + 9000 0 0 3 40000 33 1 + 9000 0 0 4 40000 34 1 + + /* IDSEL 19 */ + 9800 0 0 1 40000 34 1 + 9800 0 0 2 40000 31 1 + 9800 0 0 3 40000 32 1 + 9800 0 0 4 40000 33 1 + + /* IDSEL 20 */ + a000 0 0 1 40000 33 1 + a000 0 0 2 40000 34 1 + a000 0 0 3 40000 31 1 + a000 0 0 4 40000 32 1 + + /* IDSEL 21 */ + a800 0 0 1 40000 32 1 + a800 0 0 2 40000 33 1 + a800 0 0 3 40000 34 1 + a800 0 0 4 40000 31 1>; + + interrupt-parent = <40000>; + interrupts = <42 0>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 01000000>; + }; + + pic@40000 { + linux,phandle = <40000>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 20100>; + built-in; + device_type = "open-pic"; + }; + + cpm@e0000000 { + linux,phandle = ; + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "cpm"; + model = "CPM2"; + ranges = <0 0 c0000>; + reg = <80000 40000>; + command-proc = <919c0>; + brg-frequency = <9d5b340>; + + pic@90c00 { + linux,phandle = <90c00>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 0>; + interrupt-parent = <40000>; + reg = <90c00 80>; + built-in; + device_type = "cpm-pic"; + }; + + scc@91a00 { + device_type = "serial"; + compatible = "cpm_uart"; + model = "SCC"; + device-id = <2>; + reg = <91a00 20 88000 100>; + clock-setup = <00ffffff 0>; + rx-clock = <1>; + tx-clock = <1>; + current-speed = <1c200>; + interrupts = <64 1>; + interrupt-parent = <90c00>; + }; + + scc@91a20 { + device_type = "serial"; + compatible = "cpm_uart"; + model = "SCC"; + device-id = <3>; + reg = <91a20 20 88100 100>; + clock-setup = ; + rx-clock = <2>; + tx-clock = <2>; + current-speed = <1c200>; + interrupts = <65 1>; + interrupt-parent = <90c00>; + }; + + fcc@91320 { + device_type = "network"; + compatible = "fs_enet"; + model = "FCC"; + device-id = <3>; + reg = <91320 20 88500 100 913a0 30>; + mac-address = [ 00 00 0C 00 02 FD ]; + clock-setup = ; + rx-clock = <15>; + tx-clock = <16>; + interrupts = <5d 1>; + interrupt-parent = <90c00>; + phy-handle = <2452002>; + }; + + fcc@91340 { + device_type = "network"; + compatible = "fs_enet"; + model = "FCC"; + device-id = <4>; + reg = <91340 20 88600 100 913d0 30>; + mac-address = [ 00 00 0C 00 03 FD ]; + clock-setup = ; + rx-clock = <17>; + tx-clock = <18>; + interrupts = <5e 1>; + interrupt-parent = <90c00>; + phy-handle = <2452003>; + }; + }; + }; +}; diff --git a/arch/powerpc/configs/mpc8560_ads_defconfig b/arch/powerpc/configs/mpc8560_ads_defconfig new file mode 100644 index 00000000000..ddc2a7b07ba --- /dev/null +++ b/arch/powerpc/configs/mpc8560_ads_defconfig @@ -0,0 +1,854 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.18-rc4 +# Fri Aug 11 16:45:05 2006 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_52xx is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +CONFIG_PPC_85xx=y +# CONFIG_PPC_86xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_85xx=y +CONFIG_E500=y +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set +CONFIG_SPE=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_MPIC=y +CONFIG_CPM2=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +# CONFIG_MPC8540_ADS is not set +CONFIG_MPC8560_ADS=y +# CONFIG_MPC85xx_CDS is not set +CONFIG_MPC8560=y +CONFIG_PPC_INDIRECT_PCI_BE=y + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=y +# CONFIG_MATH_EMULATION is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +# CONFIG_PC_KEYBOARD is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PROC_DEVICETREE is not set +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set +# CONFIG_SECCOMP is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_PCI_DEBUG=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set +CONFIG_FS_ENET=y +# CONFIG_FS_ENET_HAS_SCC is not set +CONFIG_FS_ENET_HAS_FCC=y + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +CONFIG_E1000_NAPI=y +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_CPM=y +CONFIG_SERIAL_CPM_CONSOLE=y +CONFIG_SERIAL_CPM_SCC1=y +CONFIG_SERIAL_CPM_SCC2=y +# CONFIG_SERIAL_CPM_SCC3 is not set +# CONFIG_SERIAL_CPM_SCC4 is not set +# CONFIG_SERIAL_CPM_SMC1 is not set +# CONFIG_SERIAL_CPM_SMC2 is not set +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_UNWIND_INFO is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_DEBUGGER is not set +# CONFIG_KGDB_CONSOLE is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index c3268d9877e..0584f3c7e88 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -11,6 +11,12 @@ config MPC8540_ADS help This option enables support for the MPC 8540 ADS board +config MPC8560_ADS + bool "Freescale MPC8560 ADS" + select DEFAULT_UIMAGE + help + This option enables support for the MPC 8560 ADS board + config MPC85xx_CDS bool "Freescale MPC85xx CDS" select DEFAULT_UIMAGE @@ -25,6 +31,11 @@ config MPC8540 select PPC_INDIRECT_PCI default y if MPC8540_ADS || MPC85xx_CDS +config MPC8560 + bool + select PPC_INDIRECT_PCI + default y if MPC8560_ADS + config PPC_INDIRECT_PCI_BE bool depends on PPC_85xx @@ -34,4 +45,14 @@ config MPIC bool default y +config CPM2 + bool + depends on MPC8560 + default y + help + The CPM2 (Communications Processor Module) is a coprocessor on + embedded CPUs made by Motorola. Selecting this option means that + you wish to build a kernel for a machine with a CPM2 coprocessor + on it. + endmenu diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 7615aa59c78..282f5d0d015 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -3,4 +3,5 @@ # obj-$(CONFIG_PPC_85xx) += misc.o pci.o obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o +obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index cae6b73357d..7ebfe74bde4 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -32,6 +32,12 @@ #include #include "mpc85xx.h" +#ifdef CONFIG_CPM2 +#include +#include +#include +#endif + #ifndef CONFIG_PCI unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; @@ -57,12 +63,29 @@ mpc85xx_pcibios_fixup(void) } #endif /* CONFIG_PCI */ +#ifdef CONFIG_CPM2 + +static void cpm2_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) +{ + int cascade_irq; + + while ((cascade_irq = cpm2_get_irq(regs)) >= 0) { + generic_handle_irq(cascade_irq, regs); + } + desc->chip->eoi(irq); +} + +#endif /* CONFIG_CPM2 */ void __init mpc85xx_ads_pic_init(void) { struct mpic *mpic; struct resource r; struct device_node *np = NULL; +#ifdef CONFIG_CPM2 + int irq; +#endif np = of_find_node_by_type(np, "open-pic"); @@ -104,11 +127,92 @@ void __init mpc85xx_ads_pic_init(void) mpic_assign_isu(mpic, 14, r.start + 0x10100); mpic_init(mpic); + +#ifdef CONFIG_CPM2 + /* Setup CPM2 PIC */ + np = of_find_node_by_type(NULL, "cpm-pic"); + if (np == NULL) { + printk(KERN_ERR "PIC init: can not find cpm-pic node\n"); + return; + } + irq = irq_of_parse_and_map(np, 0); + + cpm2_pic_init(np); + set_irq_chained_handler(irq, cpm2_cascade); +#endif } /* * Setup the architecture */ +#ifdef CONFIG_CPM2 +static void init_fcc_ioports(void) +{ + struct immap *immap; + struct io_port *io; + u32 tempval; + + immap = cpm2_immr; + + io = &immap->im_ioport; + /* FCC2/3 are on the ports B/C. */ + tempval = in_be32(&io->iop_pdirb); + tempval &= ~PB2_DIRB0; + tempval |= PB2_DIRB1; + out_be32(&io->iop_pdirb, tempval); + + tempval = in_be32(&io->iop_psorb); + tempval &= ~PB2_PSORB0; + tempval |= PB2_PSORB1; + out_be32(&io->iop_psorb, tempval); + + tempval = in_be32(&io->iop_pparb); + tempval |= (PB2_DIRB0 | PB2_DIRB1); + out_be32(&io->iop_pparb, tempval); + + tempval = in_be32(&io->iop_pdirb); + tempval &= ~PB3_DIRB0; + tempval |= PB3_DIRB1; + out_be32(&io->iop_pdirb, tempval); + + tempval = in_be32(&io->iop_psorb); + tempval &= ~PB3_PSORB0; + tempval |= PB3_PSORB1; + out_be32(&io->iop_psorb, tempval); + + tempval = in_be32(&io->iop_pparb); + tempval |= (PB3_DIRB0 | PB3_DIRB1); + out_be32(&io->iop_pparb, tempval); + + tempval = in_be32(&io->iop_pdirc); + tempval |= PC3_DIRC1; + out_be32(&io->iop_pdirc, tempval); + + tempval = in_be32(&io->iop_pparc); + tempval |= PC3_DIRC1; + out_be32(&io->iop_pparc, tempval); + + /* Port C has clocks...... */ + tempval = in_be32(&io->iop_psorc); + tempval &= ~(CLK_TRX); + out_be32(&io->iop_psorc, tempval); + + tempval = in_be32(&io->iop_pdirc); + tempval &= ~(CLK_TRX); + out_be32(&io->iop_pdirc, tempval); + tempval = in_be32(&io->iop_pparc); + tempval |= (CLK_TRX); + out_be32(&io->iop_pparc, tempval); + + /* Configure Serial Interface clock routing. + * First, clear all FCC bits to zero, + * then set the ones we want. + */ + immap->im_cpmux.cmx_fcr &= ~(CPMUX_CLK_MASK); + immap->im_cpmux.cmx_fcr |= CPMUX_CLK_ROUTE; +} +#endif + static void __init mpc85xx_ads_setup_arch(void) { struct device_node *cpu; @@ -131,6 +235,11 @@ static void __init mpc85xx_ads_setup_arch(void) of_node_put(cpu); } +#ifdef CONFIG_CPM2 + cpm2_reset(); + init_fcc_ioports(); +#endif + #ifdef CONFIG_PCI for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.h b/arch/powerpc/platforms/85xx/mpc85xx_ads.h new file mode 100644 index 00000000000..effcbf78f85 --- /dev/null +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.h @@ -0,0 +1,61 @@ +/* + * MPC85xx ADS board definitions + * + * Maintainer: Kumar Gala + * + * Copyright 2004 Freescale Semiconductor Inc. + * + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MACH_MPC85XXADS_H +#define __MACH_MPC85XXADS_H + +#include +#include +#include + +#define BCSR_ADDR ((uint)0xf8000000) +#define BCSR_SIZE ((uint)(32 * 1024)) + +#ifdef CONFIG_CPM2 + +#define MPC85xx_CPM_OFFSET (0x80000) + +#define CPM_MAP_ADDR (get_immrbase() + MPC85xx_CPM_OFFSET) +#define CPM_IRQ_OFFSET 60 + +#define SIU_INT_SMC1 ((uint)0x04+CPM_IRQ_OFFSET) +#define SIU_INT_SMC2 ((uint)0x05+CPM_IRQ_OFFSET) +#define SIU_INT_SCC1 ((uint)0x28+CPM_IRQ_OFFSET) +#define SIU_INT_SCC2 ((uint)0x29+CPM_IRQ_OFFSET) +#define SIU_INT_SCC3 ((uint)0x2a+CPM_IRQ_OFFSET) +#define SIU_INT_SCC4 ((uint)0x2b+CPM_IRQ_OFFSET) + +/* FCC1 Clock Source Configuration. These can be + * redefined in the board specific file. + * Can only choose from CLK9-12 */ +#define F1_RXCLK 12 +#define F1_TXCLK 11 + +/* FCC2 Clock Source Configuration. These can be + * redefined in the board specific file. + * Can only choose from CLK13-16 */ +#define F2_RXCLK 13 +#define F2_TXCLK 14 + +/* FCC3 Clock Source Configuration. These can be + * redefined in the board specific file. + * Can only choose from CLK13-16 */ +#define F3_RXCLK 15 +#define F3_TXCLK 16 + +#endif /* CONFIG_CPM2 */ +#endif /* __MACH_MPC85XXADS_H */ diff --git a/include/asm-powerpc/mpc85xx.h b/include/asm-powerpc/mpc85xx.h new file mode 100644 index 00000000000..ccdb8a21138 --- /dev/null +++ b/include/asm-powerpc/mpc85xx.h @@ -0,0 +1,53 @@ +/* + * include/asm-powerpc/mpc85xx.h + * + * MPC85xx definitions + * + * Maintainer: Kumar Gala + * + * Copyright 2004 Freescale Semiconductor, Inc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifdef __KERNEL__ +#ifndef __ASM_MPC85xx_H__ +#define __ASM_MPC85xx_H__ + +#include + +#ifdef CONFIG_85xx + +#if defined(CONFIG_MPC8540_ADS) || defined(CONFIG_MPC8560_ADS) +#include +#endif +#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS) +#include +#endif +#ifdef CONFIG_MPC85xx_CDS +#include +#endif + +#define _IO_BASE isa_io_base +#define _ISA_MEM_BASE isa_mem_base +#ifdef CONFIG_PCI +#define PCI_DRAM_OFFSET pci_dram_offset +#else +#define PCI_DRAM_OFFSET 0 +#endif + +/* Let modules/drivers get at CCSRBAR */ +extern phys_addr_t get_ccsrbar(void); + +#ifdef MODULE +#define CCSRBAR get_ccsrbar() +#else +#define CCSRBAR BOARD_CCSRBAR +#endif + +#endif /* CONFIG_85xx */ +#endif /* __ASM_MPC85xx_H__ */ +#endif /* __KERNEL__ */ -- cgit v1.2.3 From fc8e50e349aa722d9f97ed9ba30e324ede8fa408 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Thu, 21 Sep 2006 22:37:58 +0400 Subject: POWERPC: Get rid of remapping the whole immr The stuff below cleans up the code attempting to remap the whole cpm2_immr early, as well as places happily assuming that fact. This is more like the 2.4 legacy stuff, and is at least confusing and unclear now. To keep the world comfortable, a new mechanism is introduced: before accessing specific immr register/register set, one needs to map it, using cpm2_map(), for instance, access to CPM command register will look like volatile cpm_cpm2_t *cp = cpm2_map(im_cpm); keeping the code clear, yet without "already defined somewhere" cpm2_immr. So far, unmapping code is not implemented, but it's not a big deal to add it, if the whole idea makes sense. Signed-off-by: Vitaly Bordug --- arch/powerpc/sysdev/cpm2_common.c | 19 +++-- arch/powerpc/sysdev/cpm2_pic.c | 34 ++++----- arch/powerpc/sysdev/cpm2_pic.h | 2 + arch/powerpc/sysdev/fsl_soc.c | 2 +- drivers/serial/cpm_uart/cpm_uart_cpm2.c | 130 +++++++++++++++++++++----------- drivers/serial/cpm_uart/cpm_uart_cpm2.h | 2 +- include/asm-powerpc/fs_pd.h | 18 +++++ include/asm-ppc/cpm2.h | 4 + include/asm-ppc/fs_pd.h | 4 + 9 files changed, 148 insertions(+), 67 deletions(-) diff --git a/arch/powerpc/sysdev/cpm2_common.c b/arch/powerpc/sysdev/cpm2_common.c index f7a04892400..73376f9c156 100644 --- a/arch/powerpc/sysdev/cpm2_common.c +++ b/arch/powerpc/sysdev/cpm2_common.c @@ -51,6 +51,7 @@ cpm_cpm2_t *cpmp; /* Pointer to comm processor space */ * the communication processor devices. */ cpm2_map_t *cpm2_immr; +intctl_cpm2_t *cpm2_intctl; #define CPM_MAP_SIZE (0x40000) /* 256k - the PQ3 reserve this amount of space for CPM as it is larger @@ -60,6 +61,7 @@ void cpm2_reset(void) { cpm2_immr = (cpm2_map_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE); + cpm2_intctl = cpm2_map(im_intctl); /* Reclaim the DP memory for our use. */ @@ -94,13 +96,15 @@ cpm_setbrg(uint brg, uint rate) /* This is good enough to get SMCs running..... */ if (brg < 4) { - bp = (uint *)&cpm2_immr->im_brgc1; + bp = cpm2_map_size(im_brgc1, 16); } else { - bp = (uint *)&cpm2_immr->im_brgc5; + bp = cpm2_map_size(im_brgc5, 16); brg -= 4; } bp += brg; *bp = ((BRG_UART_CLK / rate) << 1) | CPM_BRG_EN; + + cpm2_unmap(bp); } /* This function is used to set high speed synchronous baud rate @@ -112,16 +116,18 @@ cpm2_fastbrg(uint brg, uint rate, int div16) volatile uint *bp; if (brg < 4) { - bp = (uint *)&cpm2_immr->im_brgc1; + bp = cpm2_map_size(im_brgc1, 16); } else { - bp = (uint *)&cpm2_immr->im_brgc5; + bp = cpm2_map_size(im_brgc5, 16); brg -= 4; } bp += brg; *bp = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN; if (div16) *bp |= CPM_BRG_DIV16; + + cpm2_unmap(bp); } /* @@ -132,11 +138,14 @@ static spinlock_t cpm_dpmem_lock; * until the memory subsystem goes up... */ static rh_block_t cpm_boot_dpmem_rh_block[16]; static rh_info_t cpm_dpmem_info; +static u8* im_dprambase; static void cpm2_dpinit(void) { spin_lock_init(&cpm_dpmem_lock); + im_dprambase = ioremap(CPM_MAP_ADDR, CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE); + /* initialize the info header */ rh_init(&cpm_dpmem_info, 1, sizeof(cpm_boot_dpmem_rh_block) / @@ -205,6 +214,6 @@ EXPORT_SYMBOL(cpm_dpdump); void *cpm_dpram_addr(uint offset) { - return (void *)&cpm2_immr->im_dprambase[offset]; + return (void *)(im_dprambase + offset); } EXPORT_SYMBOL(cpm_dpram_addr); diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c index c804475c07d..51752990f7b 100644 --- a/arch/powerpc/sysdev/cpm2_pic.c +++ b/arch/powerpc/sysdev/cpm2_pic.c @@ -78,7 +78,7 @@ static void cpm2_mask_irq(unsigned int irq_nr) bit = irq_to_siubit[irq_nr]; word = irq_to_siureg[irq_nr]; - simr = &(cpm2_immr->im_intctl.ic_simrh); + simr = &(cpm2_intctl->ic_simrh); ppc_cached_irq_mask[word] &= ~(1 << bit); simr[word] = ppc_cached_irq_mask[word]; } @@ -93,7 +93,7 @@ static void cpm2_unmask_irq(unsigned int irq_nr) bit = irq_to_siubit[irq_nr]; word = irq_to_siureg[irq_nr]; - simr = &(cpm2_immr->im_intctl.ic_simrh); + simr = &(cpm2_intctl->ic_simrh); ppc_cached_irq_mask[word] |= 1 << bit; simr[word] = ppc_cached_irq_mask[word]; } @@ -108,8 +108,8 @@ static void cpm2_mask_and_ack(unsigned int irq_nr) bit = irq_to_siubit[irq_nr]; word = irq_to_siureg[irq_nr]; - simr = &(cpm2_immr->im_intctl.ic_simrh); - sipnr = &(cpm2_immr->im_intctl.ic_sipnrh); + simr = &(cpm2_intctl->ic_simrh); + sipnr = &(cpm2_intctl->ic_sipnrh); ppc_cached_irq_mask[word] &= ~(1 << bit); simr[word] = ppc_cached_irq_mask[word]; sipnr[word] = 1 << bit; @@ -127,7 +127,7 @@ static void cpm2_end_irq(unsigned int irq_nr) bit = irq_to_siubit[irq_nr]; word = irq_to_siureg[irq_nr]; - simr = &(cpm2_immr->im_intctl.ic_simrh); + simr = &(cpm2_intctl->ic_simrh); ppc_cached_irq_mask[word] |= 1 << bit; simr[word] = ppc_cached_irq_mask[word]; /* @@ -152,10 +152,10 @@ int cpm2_get_irq(struct pt_regs *regs) int irq; unsigned long bits; - /* For CPM2, read the SIVEC register and shift the bits down - * to get the irq number.*/ - bits = cpm2_immr->im_intctl.ic_sivec; - irq = bits >> 26; + /* For CPM2, read the SIVEC register and shift the bits down + * to get the irq number. */ + bits = cpm2_intctl->ic_sivec; + irq = bits >> 26; if (irq == 0) return(-1); @@ -223,26 +223,26 @@ void cpm2_pic_init(struct device_node *node) /* Mask out everything */ - cpm2_immr->im_intctl.ic_simrh = 0x00000000; - cpm2_immr->im_intctl.ic_simrl = 0x00000000; + cpm2_intctl->ic_simrh = 0x00000000; + cpm2_intctl->ic_simrl = 0x00000000; wmb(); /* Ack everything */ - cpm2_immr->im_intctl.ic_sipnrh = 0xffffffff; - cpm2_immr->im_intctl.ic_sipnrl = 0xffffffff; + cpm2_intctl->ic_sipnrh = 0xffffffff; + cpm2_intctl->ic_sipnrl = 0xffffffff; wmb(); /* Dummy read of the vector */ - i = cpm2_immr->im_intctl.ic_sivec; + i = cpm2_intctl->ic_sivec; rmb(); /* Initialize the default interrupt mapping priorities, * in case the boot rom changed something on us. */ - cpm2_immr->im_intctl.ic_sicr = 0; - cpm2_immr->im_intctl.ic_scprrh = 0x05309770; - cpm2_immr->im_intctl.ic_scprrl = 0x05309770; + cpm2_intctl->ic_sicr = 0; + cpm2_intctl->ic_scprrh = 0x05309770; + cpm2_intctl->ic_scprrl = 0x05309770; /* create a legacy host */ if (node) diff --git a/arch/powerpc/sysdev/cpm2_pic.h b/arch/powerpc/sysdev/cpm2_pic.h index 436cca77db6..d63e45d4df5 100644 --- a/arch/powerpc/sysdev/cpm2_pic.h +++ b/arch/powerpc/sysdev/cpm2_pic.h @@ -1,6 +1,8 @@ #ifndef _PPC_KERNEL_CPM2_H #define _PPC_KERNEL_CPM2_H +extern intctl_cpm2_t *cpm2_intctl; + extern int cpm2_get_irq(struct pt_regs *regs); extern void cpm2_pic_init(struct device_node*); diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 0ed2aaee105..0b8a03cc304 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -633,7 +633,7 @@ static int __init fs_enet_of_init(void) if (strstr(model, "FCC")) { int fcc_index = fs_get_fcc_index(*id); - fs_enet_data.dpram_offset = (u32)cpm2_immr->im_dprambase; + fs_enet_data.dpram_offset = (u32)cpm_dpram_addr(0); fs_enet_data.rx_ring = 32; fs_enet_data.tx_ring = 32; fs_enet_data.rx_copybreak = 240; diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c index 02b9ef9abd3..b691d3e1475 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c @@ -51,8 +51,9 @@ void cpm_line_cr_cmd(int line, int cmd) { - volatile cpm_cpm2_t *cp = cpmp; ulong val; + volatile cpm_cpm2_t *cp = cpm2_map(im_cpm); + switch (line) { case UART_SMC1: @@ -85,11 +86,14 @@ void cpm_line_cr_cmd(int line, int cmd) } cp->cp_cpcr = val; while (cp->cp_cpcr & CPM_CR_FLG) ; + + cpm2_unmap(cp); } void smc1_lineif(struct uart_cpm_port *pinfo) { - volatile iop_cpm2_t *io = &cpm2_immr->im_ioport; + volatile iop_cpm2_t *io = cpm2_map(im_ioport); + volatile cpmux_t *cpmux = cpm2_map(im_cpmux); /* SMC1 is only on port D */ io->iop_ppard |= 0x00c00000; @@ -98,13 +102,17 @@ void smc1_lineif(struct uart_cpm_port *pinfo) io->iop_psord &= ~0x00c00000; /* Wire BRG1 to SMC1 */ - cpm2_immr->im_cpmux.cmx_smr &= 0x0f; + cpmux->cmx_smr &= 0x0f; pinfo->brg = 1; + + cpm2_unmap(cpmux); + cpm2_unmap(io); } void smc2_lineif(struct uart_cpm_port *pinfo) { - volatile iop_cpm2_t *io = &cpm2_immr->im_ioport; + volatile iop_cpm2_t *io = cpm2_map(im_ioport); + volatile cpmux_t *cpmux = cpm2_map(im_cpmux); /* SMC2 is only on port A */ io->iop_ppara |= 0x00c00000; @@ -113,13 +121,17 @@ void smc2_lineif(struct uart_cpm_port *pinfo) io->iop_psora &= ~0x00c00000; /* Wire BRG2 to SMC2 */ - cpm2_immr->im_cpmux.cmx_smr &= 0xf0; + cpmux->cmx_smr &= 0xf0; pinfo->brg = 2; + + cpm2_unmap(cpmux); + cpm2_unmap(io); } void scc1_lineif(struct uart_cpm_port *pinfo) { - volatile iop_cpm2_t *io = &cpm2_immr->im_ioport; + volatile iop_cpm2_t *io = cpm2_map(im_ioport); + volatile cpmux_t *cpmux = cpm2_map(im_cpmux); /* Use Port D for SCC1 instead of other functions. */ io->iop_ppard |= 0x00000003; @@ -129,9 +141,12 @@ void scc1_lineif(struct uart_cpm_port *pinfo) io->iop_pdird |= 0x00000002; /* Tx */ /* Wire BRG1 to SCC1 */ - cpm2_immr->im_cpmux.cmx_scr &= 0x00ffffff; - cpm2_immr->im_cpmux.cmx_scr |= 0x00000000; + cpmux->cmx_scr &= 0x00ffffff; + cpmux->cmx_scr |= 0x00000000; pinfo->brg = 1; + + cpm2_unmap(cpmux); + cpm2_unmap(io); } void scc2_lineif(struct uart_cpm_port *pinfo) @@ -144,43 +159,57 @@ void scc2_lineif(struct uart_cpm_port *pinfo) * be supported in a sane fashion. */ #ifndef CONFIG_STX_GP3 - volatile iop_cpm2_t *io = &cpm2_immr->im_ioport; + volatile iop_cpm2_t *io = cpm2_map(im_ioport); + volatile cpmux_t *cpmux = cpm2_map(im_cpmux); + io->iop_pparb |= 0x008b0000; io->iop_pdirb |= 0x00880000; io->iop_psorb |= 0x00880000; io->iop_pdirb &= ~0x00030000; io->iop_psorb &= ~0x00030000; #endif - cpm2_immr->im_cpmux.cmx_scr &= 0xff00ffff; - cpm2_immr->im_cpmux.cmx_scr |= 0x00090000; + cpmux->cmx_scr &= 0xff00ffff; + cpmux->cmx_scr |= 0x00090000; pinfo->brg = 2; + + cpm2_unmap(cpmux); + cpm2_unmap(io); } void scc3_lineif(struct uart_cpm_port *pinfo) { - volatile iop_cpm2_t *io = &cpm2_immr->im_ioport; + volatile iop_cpm2_t *io = cpm2_map(im_ioport); + volatile cpmux_t *cpmux = cpm2_map(im_cpmux); + io->iop_pparb |= 0x008b0000; io->iop_pdirb |= 0x00880000; io->iop_psorb |= 0x00880000; io->iop_pdirb &= ~0x00030000; io->iop_psorb &= ~0x00030000; - cpm2_immr->im_cpmux.cmx_scr &= 0xffff00ff; - cpm2_immr->im_cpmux.cmx_scr |= 0x00001200; + cpmux->cmx_scr &= 0xffff00ff; + cpmux->cmx_scr |= 0x00001200; pinfo->brg = 3; + + cpm2_unmap(cpmux); + cpm2_unmap(io); } void scc4_lineif(struct uart_cpm_port *pinfo) { - volatile iop_cpm2_t *io = &cpm2_immr->im_ioport; + volatile iop_cpm2_t *io = cpm2_map(im_ioport); + volatile cpmux_t *cpmux = cpm2_map(im_cpmux); io->iop_ppard |= 0x00000600; io->iop_psord &= ~0x00000600; /* Tx/Rx */ io->iop_pdird &= ~0x00000200; /* Rx */ io->iop_pdird |= 0x00000400; /* Tx */ - cpm2_immr->im_cpmux.cmx_scr &= 0xffffff00; - cpm2_immr->im_cpmux.cmx_scr |= 0x0000001b; + cpmux->cmx_scr &= 0xffffff00; + cpmux->cmx_scr |= 0x0000001b; pinfo->brg = 4; + + cpm2_unmap(cpmux); + cpm2_unmap(io); } /* @@ -255,16 +284,23 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo) /* Setup any dynamic params in the uart desc */ int cpm_uart_init_portdesc(void) { +#if defined(CONFIG_SERIAL_CPM_SMC1) || defined(CONFIG_SERIAL_CPM_SMC2) + u32 addr; +#endif pr_debug("CPM uart[-]:init portdesc\n"); cpm_uart_nr = 0; #ifdef CONFIG_SERIAL_CPM_SMC1 - cpm_uart_ports[UART_SMC1].smcp = (smc_t *) & cpm2_immr->im_smc[0]; - cpm_uart_ports[UART_SMC1].smcup = - (smc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SMC1]; - *(u16 *)(&cpm2_immr->im_dprambase[PROFF_SMC1_BASE]) = PROFF_SMC1; + cpm_uart_ports[UART_SMC1].smcp = (smc_t *) cpm2_map(im_smc[0]); cpm_uart_ports[UART_SMC1].port.mapbase = - (unsigned long)&cpm2_immr->im_smc[0]; + (unsigned long)cpm_uart_ports[UART_SMC1].smcp; + + cpm_uart_ports[UART_SMC1].smcup = + (smc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SMC1], PROFF_SMC_SIZE); + addr = (u16 *)cpm2_map_size(im_dprambase[PROFF_SMC1_BASE], 2); + *addr = PROFF_SMC1; + cpm2_unmap(addr); + cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX); cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); cpm_uart_ports[UART_SMC1].port.uartclk = uart_clock(); @@ -272,12 +308,16 @@ int cpm_uart_init_portdesc(void) #endif #ifdef CONFIG_SERIAL_CPM_SMC2 - cpm_uart_ports[UART_SMC2].smcp = (smc_t *) & cpm2_immr->im_smc[1]; - cpm_uart_ports[UART_SMC2].smcup = - (smc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SMC2]; - *(u16 *)(&cpm2_immr->im_dprambase[PROFF_SMC2_BASE]) = PROFF_SMC2; + cpm_uart_ports[UART_SMC2].smcp = (smc_t *) cpm2_map(im_smc[1]); cpm_uart_ports[UART_SMC2].port.mapbase = - (unsigned long)&cpm2_immr->im_smc[1]; + (unsigned long)cpm_uart_ports[UART_SMC2].smcp; + + cpm_uart_ports[UART_SMC2].smcup = + (smc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SMC2], PROFF_SMC_SIZE); + addr = (u16 *)cpm2_map_size(im_dprambase[PROFF_SMC2_BASE], 2); + *addr = PROFF_SMC2; + cpm2_unmap(addr); + cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX); cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); cpm_uart_ports[UART_SMC2].port.uartclk = uart_clock(); @@ -285,11 +325,12 @@ int cpm_uart_init_portdesc(void) #endif #ifdef CONFIG_SERIAL_CPM_SCC1 - cpm_uart_ports[UART_SCC1].sccp = (scc_t *) & cpm2_immr->im_scc[0]; - cpm_uart_ports[UART_SCC1].sccup = - (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC1]; + cpm_uart_ports[UART_SCC1].sccp = (scc_t *) cpm2_map(im_scc[0]); cpm_uart_ports[UART_SCC1].port.mapbase = - (unsigned long)&cpm2_immr->im_scc[0]; + (unsigned long)cpm_uart_ports[UART_SCC1].sccp; + cpm_uart_ports[UART_SCC1].sccup = + (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC1], PROFF_SCC_SIZE); + cpm_uart_ports[UART_SCC1].sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX); cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &= @@ -299,11 +340,12 @@ int cpm_uart_init_portdesc(void) #endif #ifdef CONFIG_SERIAL_CPM_SCC2 - cpm_uart_ports[UART_SCC2].sccp = (scc_t *) & cpm2_immr->im_scc[1]; - cpm_uart_ports[UART_SCC2].sccup = - (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC2]; + cpm_uart_ports[UART_SCC2].sccp = (scc_t *) cpm2_map(im_scc[1]); cpm_uart_ports[UART_SCC2].port.mapbase = - (unsigned long)&cpm2_immr->im_scc[1]; + (unsigned long)cpm_uart_ports[UART_SCC2].sccp; + cpm_uart_ports[UART_SCC2].sccup = + (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC2], PROFF_SCC_SIZE); + cpm_uart_ports[UART_SCC2].sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX); cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &= @@ -313,11 +355,12 @@ int cpm_uart_init_portdesc(void) #endif #ifdef CONFIG_SERIAL_CPM_SCC3 - cpm_uart_ports[UART_SCC3].sccp = (scc_t *) & cpm2_immr->im_scc[2]; - cpm_uart_ports[UART_SCC3].sccup = - (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC3]; + cpm_uart_ports[UART_SCC3].sccp = (scc_t *) cpm2_map(im_scc[2]); cpm_uart_ports[UART_SCC3].port.mapbase = - (unsigned long)&cpm2_immr->im_scc[2]; + (unsigned long)cpm_uart_ports[UART_SCC3].sccp; + cpm_uart_ports[UART_SCC3].sccup = + (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC3], PROFF_SCC_SIZE); + cpm_uart_ports[UART_SCC3].sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX); cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &= @@ -327,11 +370,12 @@ int cpm_uart_init_portdesc(void) #endif #ifdef CONFIG_SERIAL_CPM_SCC4 - cpm_uart_ports[UART_SCC4].sccp = (scc_t *) & cpm2_immr->im_scc[3]; - cpm_uart_ports[UART_SCC4].sccup = - (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC4]; + cpm_uart_ports[UART_SCC4].sccp = (scc_t *) cpm2_map(im_scc[3]); cpm_uart_ports[UART_SCC4].port.mapbase = - (unsigned long)&cpm2_immr->im_scc[3]; + (unsigned long)cpm_uart_ports[UART_SCC4].sccp; + cpm_uart_ports[UART_SCC4].sccup = + (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC4], PROFF_SCC_SIZE); + cpm_uart_ports[UART_SCC4].sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX); cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &= diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.h b/drivers/serial/cpm_uart/cpm_uart_cpm2.h index 4793fecf8ec..a663300d347 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.h +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.h @@ -40,6 +40,6 @@ static inline void cpm_set_smc_fcr(volatile smc_uart_t * up) up->smc_tfcr = CPMFCR_GBL | CPMFCR_EB; } -#define DPRAM_BASE ((unsigned char *)&cpm2_immr->im_dprambase[0]) +#define DPRAM_BASE ((unsigned char *)cpm_dpram_addr(0)) #endif diff --git a/include/asm-powerpc/fs_pd.h b/include/asm-powerpc/fs_pd.h index d530f68b4ee..3d0e819d37f 100644 --- a/include/asm-powerpc/fs_pd.h +++ b/include/asm-powerpc/fs_pd.h @@ -11,6 +11,7 @@ #ifndef FS_PD_H #define FS_PD_H +#include #include #include @@ -24,4 +25,21 @@ static inline int uart_clock(void) return ppc_proc_freq; } +#define cpm2_map(member) \ +({ \ + u32 offset = offsetof(cpm2_map_t, member); \ + void *addr = ioremap (CPM_MAP_ADDR + offset, \ + sizeof( ((cpm2_map_t*)0)->member)); \ + addr; \ +}) + +#define cpm2_map_size(member, size) \ +({ \ + u32 offset = offsetof(cpm2_map_t, member); \ + void *addr = ioremap (CPM_MAP_ADDR + offset, size); \ + addr; \ +}) + +#define cpm2_unmap(addr) iounmap(addr) + #endif diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h index 876974e5412..bd6623aed38 100644 --- a/include/asm-ppc/cpm2.h +++ b/include/asm-ppc/cpm2.h @@ -177,6 +177,10 @@ typedef struct cpm_buf_desc { #define PROFF_I2C_BASE ((uint)0x8afc) #define PROFF_IDMA4_BASE ((uint)0x8afe) +#define PROFF_SCC_SIZE ((uint)0x100) +#define PROFF_FCC_SIZE ((uint)0x100) +#define PROFF_SMC_SIZE ((uint)64) + /* The SMCs are relocated to any of the first eight DPRAM pages. * We will fix these at the first locations of DPRAM, until we * get some microcode patches :-). diff --git a/include/asm-ppc/fs_pd.h b/include/asm-ppc/fs_pd.h index eed77783412..8691327653a 100644 --- a/include/asm-ppc/fs_pd.h +++ b/include/asm-ppc/fs_pd.h @@ -29,4 +29,8 @@ static inline int uart_clock(void) return (((bd_t *) __res)->bi_intfreq); } +#define cpm2_map(member) (&cpm2_immr->member) +#define cpm2_map_size(member, size) (&cpm2_immr->member) +#define cpm2_unmap(addr) do {} while(0) + #endif -- cgit v1.2.3 From d3465c921f79cfef0a4a8ceeeef9a3721bbbb57d Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Thu, 21 Sep 2006 22:38:05 +0400 Subject: POWERPC: overhaul with cpm2_map mechanism Incorporating the new way of cpm2 immr access, introduced in the previous patch, into CPM2 peripheral devices (fs_enet and cpm_uart). Both ppc and powerpc approved working( real actions taken in powerpc only, ppc just has a wrapper to keep init stuff consistent). Signed-off-by: Vitaly Bordug --- arch/powerpc/platforms/85xx/mpc85xx_ads.c | 109 ++++++++++++++++-------------- arch/powerpc/sysdev/cpm2_common.c | 90 ++++++++++++++++++++++++ arch/powerpc/sysdev/fsl_soc.c | 7 ++ arch/ppc/platforms/mpc8272ads_setup.c | 8 +-- arch/ppc/platforms/mpc866ads_setup.c | 8 +-- arch/ppc/platforms/mpc885ads_setup.c | 10 +-- drivers/net/fs_enet/fs_enet-main.c | 2 +- drivers/serial/cpm_uart/cpm_uart_core.c | 4 +- include/asm-ppc/cpm2.h | 53 +++++++++++++++ include/linux/fs_enet_pd.h | 10 +-- include/linux/fs_uart_pd.h | 4 +- 11 files changed, 235 insertions(+), 70 deletions(-) diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index 7ebfe74bde4..28070e7ae50 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -33,6 +33,7 @@ #include "mpc85xx.h" #ifdef CONFIG_CPM2 +#include #include #include #include @@ -146,70 +147,81 @@ void __init mpc85xx_ads_pic_init(void) * Setup the architecture */ #ifdef CONFIG_CPM2 -static void init_fcc_ioports(void) +void init_fcc_ioports(struct fs_platform_info *fpi) { - struct immap *immap; - struct io_port *io; + struct io_port *io = cpm2_map(im_ioport); + int fcc_no = fs_get_fcc_index(fpi->fs_no); + int target; u32 tempval; - immap = cpm2_immr; - - io = &immap->im_ioport; - /* FCC2/3 are on the ports B/C. */ - tempval = in_be32(&io->iop_pdirb); - tempval &= ~PB2_DIRB0; - tempval |= PB2_DIRB1; - out_be32(&io->iop_pdirb, tempval); - - tempval = in_be32(&io->iop_psorb); - tempval &= ~PB2_PSORB0; - tempval |= PB2_PSORB1; - out_be32(&io->iop_psorb, tempval); - - tempval = in_be32(&io->iop_pparb); - tempval |= (PB2_DIRB0 | PB2_DIRB1); - out_be32(&io->iop_pparb, tempval); - - tempval = in_be32(&io->iop_pdirb); - tempval &= ~PB3_DIRB0; - tempval |= PB3_DIRB1; - out_be32(&io->iop_pdirb, tempval); - - tempval = in_be32(&io->iop_psorb); - tempval &= ~PB3_PSORB0; - tempval |= PB3_PSORB1; - out_be32(&io->iop_psorb, tempval); - - tempval = in_be32(&io->iop_pparb); - tempval |= (PB3_DIRB0 | PB3_DIRB1); - out_be32(&io->iop_pparb, tempval); - - tempval = in_be32(&io->iop_pdirc); - tempval |= PC3_DIRC1; - out_be32(&io->iop_pdirc, tempval); - - tempval = in_be32(&io->iop_pparc); - tempval |= PC3_DIRC1; - out_be32(&io->iop_pparc, tempval); + switch(fcc_no) { + case 1: + tempval = in_be32(&io->iop_pdirb); + tempval &= ~PB2_DIRB0; + tempval |= PB2_DIRB1; + out_be32(&io->iop_pdirb, tempval); + + tempval = in_be32(&io->iop_psorb); + tempval &= ~PB2_PSORB0; + tempval |= PB2_PSORB1; + out_be32(&io->iop_psorb, tempval); + + tempval = in_be32(&io->iop_pparb); + tempval |= (PB2_DIRB0 | PB2_DIRB1); + out_be32(&io->iop_pparb, tempval); + + target = CPM_CLK_FCC2; + break; + case 2: + tempval = in_be32(&io->iop_pdirb); + tempval &= ~PB3_DIRB0; + tempval |= PB3_DIRB1; + out_be32(&io->iop_pdirb, tempval); + + tempval = in_be32(&io->iop_psorb); + tempval &= ~PB3_PSORB0; + tempval |= PB3_PSORB1; + out_be32(&io->iop_psorb, tempval); + + tempval = in_be32(&io->iop_pparb); + tempval |= (PB3_DIRB0 | PB3_DIRB1); + out_be32(&io->iop_pparb, tempval); + + tempval = in_be32(&io->iop_pdirc); + tempval |= PC3_DIRC1; + out_be32(&io->iop_pdirc, tempval); + + tempval = in_be32(&io->iop_pparc); + tempval |= PC3_DIRC1; + out_be32(&io->iop_pparc, tempval); + + target = CPM_CLK_FCC3; + break; + default: + printk(KERN_ERR "init_fcc_ioports: invalid FCC number\n"); + return; + } /* Port C has clocks...... */ tempval = in_be32(&io->iop_psorc); - tempval &= ~(CLK_TRX); + tempval &= ~(PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8)); out_be32(&io->iop_psorc, tempval); tempval = in_be32(&io->iop_pdirc); - tempval &= ~(CLK_TRX); + tempval &= ~(PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8)); out_be32(&io->iop_pdirc, tempval); tempval = in_be32(&io->iop_pparc); - tempval |= (CLK_TRX); + tempval |= (PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8)); out_be32(&io->iop_pparc, tempval); + cpm2_unmap(io); + /* Configure Serial Interface clock routing. - * First, clear all FCC bits to zero, + * First, clear FCC bits to zero, * then set the ones we want. */ - immap->im_cpmux.cmx_fcr &= ~(CPMUX_CLK_MASK); - immap->im_cpmux.cmx_fcr |= CPMUX_CLK_ROUTE; + cpm2_clk_setup(target, fpi->clk_rx, CPM_CLK_RX); + cpm2_clk_setup(target, fpi->clk_tx, CPM_CLK_TX); } #endif @@ -237,7 +249,6 @@ static void __init mpc85xx_ads_setup_arch(void) #ifdef CONFIG_CPM2 cpm2_reset(); - init_fcc_ioports(); #endif #ifdef CONFIG_PCI diff --git a/arch/powerpc/sysdev/cpm2_common.c b/arch/powerpc/sysdev/cpm2_common.c index 73376f9c156..ec265995d5d 100644 --- a/arch/powerpc/sysdev/cpm2_common.c +++ b/arch/powerpc/sysdev/cpm2_common.c @@ -130,6 +130,96 @@ cpm2_fastbrg(uint brg, uint rate, int div16) cpm2_unmap(bp); } +int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode) +{ + int ret = 0; + int shift; + int i, bits = 0; + cpmux_t *im_cpmux; + u32 *reg; + u32 mask = 7; + u8 clk_map [24][3] = { + {CPM_CLK_FCC1, CPM_BRG5, 0}, + {CPM_CLK_FCC1, CPM_BRG6, 1}, + {CPM_CLK_FCC1, CPM_BRG7, 2}, + {CPM_CLK_FCC1, CPM_BRG8, 3}, + {CPM_CLK_FCC1, CPM_CLK9, 4}, + {CPM_CLK_FCC1, CPM_CLK10, 5}, + {CPM_CLK_FCC1, CPM_CLK11, 6}, + {CPM_CLK_FCC1, CPM_CLK12, 7}, + {CPM_CLK_FCC2, CPM_BRG5, 0}, + {CPM_CLK_FCC2, CPM_BRG6, 1}, + {CPM_CLK_FCC2, CPM_BRG7, 2}, + {CPM_CLK_FCC2, CPM_BRG8, 3}, + {CPM_CLK_FCC2, CPM_CLK13, 4}, + {CPM_CLK_FCC2, CPM_CLK14, 5}, + {CPM_CLK_FCC2, CPM_CLK15, 6}, + {CPM_CLK_FCC2, CPM_CLK16, 7}, + {CPM_CLK_FCC3, CPM_BRG5, 0}, + {CPM_CLK_FCC3, CPM_BRG6, 1}, + {CPM_CLK_FCC3, CPM_BRG7, 2}, + {CPM_CLK_FCC3, CPM_BRG8, 3}, + {CPM_CLK_FCC3, CPM_CLK13, 4}, + {CPM_CLK_FCC3, CPM_CLK14, 5}, + {CPM_CLK_FCC3, CPM_CLK15, 6}, + {CPM_CLK_FCC3, CPM_CLK16, 7} + }; + + im_cpmux = cpm2_map(im_cpmux); + + switch (target) { + case CPM_CLK_SCC1: + reg = &im_cpmux->cmx_scr; + shift = 24; + case CPM_CLK_SCC2: + reg = &im_cpmux->cmx_scr; + shift = 16; + break; + case CPM_CLK_SCC3: + reg = &im_cpmux->cmx_scr; + shift = 8; + break; + case CPM_CLK_SCC4: + reg = &im_cpmux->cmx_scr; + shift = 0; + break; + case CPM_CLK_FCC1: + reg = &im_cpmux->cmx_fcr; + shift = 24; + break; + case CPM_CLK_FCC2: + reg = &im_cpmux->cmx_fcr; + shift = 16; + break; + case CPM_CLK_FCC3: + reg = &im_cpmux->cmx_fcr; + shift = 8; + break; + default: + printk(KERN_ERR "cpm2_clock_setup: invalid clock target\n"); + return -EINVAL; + } + + if (mode == CPM_CLK_RX) + shift +=3; + + for (i=0; i<24; i++) { + if (clk_map[i][0] == target && clk_map[i][1] == clock) { + bits = clk_map[i][2]; + break; + } + } + if (i == sizeof(clk_map)/3) + ret = -EINVAL; + + bits <<= shift; + mask <<= shift; + out_be32(reg, (in_be32(reg) & ~mask) | bits); + + cpm2_unmap(im_cpmux); + return ret; +} + /* * dpalloc / dpfree bits. */ diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 0b8a03cc304..4e72bb98363 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -36,6 +36,7 @@ #include #include +extern void init_fcc_ioports(struct fs_platform_info*); static phys_addr_t immrbase = -1; phys_addr_t get_immrbase(void) @@ -630,6 +631,9 @@ static int __init fs_enet_of_init(void) goto unreg; } + fs_enet_data.clk_rx = *((u32 *) get_property(np, "rx-clock", NULL)); + fs_enet_data.clk_tx = *((u32 *) get_property(np, "tx-clock", NULL)); + if (strstr(model, "FCC")) { int fcc_index = fs_get_fcc_index(*id); @@ -646,6 +650,7 @@ static int __init fs_enet_of_init(void) snprintf((char*)&bus_id[(*id)], BUS_ID_SIZE, "%x:%02x", (u32)res.start, fs_enet_data.phy_addr); fs_enet_data.bus_id = (char*)&bus_id[(*id)]; + fs_enet_data.init_ioports = init_fcc_ioports; } of_node_put(phy); @@ -717,6 +722,8 @@ static int __init cpm_uart_of_init(void) cpm_uart_data.tx_buf_size = 32; cpm_uart_data.rx_num_fifo = 4; cpm_uart_data.rx_buf_size = 32; + cpm_uart_data.clk_rx = *((u32 *) get_property(np, "rx-clock", NULL)); + cpm_uart_data.clk_tx = *((u32 *) get_property(np, "tx-clock", NULL)); ret = platform_device_add_data(cpm_uart_dev, &cpm_uart_data, diff --git a/arch/ppc/platforms/mpc8272ads_setup.c b/arch/ppc/platforms/mpc8272ads_setup.c index 2a35fe2b9b9..d5d36c372c8 100644 --- a/arch/ppc/platforms/mpc8272ads_setup.c +++ b/arch/ppc/platforms/mpc8272ads_setup.c @@ -103,7 +103,7 @@ static struct fs_platform_info mpc82xx_enet_pdata[] = { }, }; -static void init_fcc1_ioports(void) +static void init_fcc1_ioports(struct fs_platform_info*) { struct io_port *io; u32 tempval; @@ -144,7 +144,7 @@ static void init_fcc1_ioports(void) iounmap(immap); } -static void init_fcc2_ioports(void) +static void init_fcc2_ioports(struct fs_platform_info*) { cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t)); u32 *bcsr = ioremap(BCSR_ADDR+12, sizeof(u32)); @@ -229,7 +229,7 @@ static void mpc8272ads_fixup_uart_pdata(struct platform_device *pdev, } } -static void init_scc1_uart_ioports(void) +static void init_scc1_uart_ioports(struct fs_uart_platform_info*) { cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t)); @@ -246,7 +246,7 @@ static void init_scc1_uart_ioports(void) iounmap(immap); } -static void init_scc4_uart_ioports(void) +static void init_scc4_uart_ioports(struct fs_uart_platform_info*) { cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t)); diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c index e12cece4c9f..5f130dca377 100644 --- a/arch/ppc/platforms/mpc866ads_setup.c +++ b/arch/ppc/platforms/mpc866ads_setup.c @@ -137,7 +137,7 @@ void __init board_init(void) iounmap(bcsr_io); } -static void setup_fec1_ioports(void) +static void setup_fec1_ioports(struct fs_platform_info*) { immap_t *immap = (immap_t *) IMAP_ADDR; @@ -145,7 +145,7 @@ static void setup_fec1_ioports(void) setbits16(&immap->im_ioport.iop_pddir, 0x1fff); } -static void setup_scc1_ioports(void) +static void setup_scc1_ioports(struct fs_platform_info*) { immap_t *immap = (immap_t *) IMAP_ADDR; unsigned *bcsr_io; @@ -194,7 +194,7 @@ static void setup_scc1_ioports(void) } -static void setup_smc1_ioports(void) +static void setup_smc1_ioports(struct fs_uart_platform_info*) { immap_t *immap = (immap_t *) IMAP_ADDR; unsigned *bcsr_io; @@ -216,7 +216,7 @@ static void setup_smc1_ioports(void) } -static void setup_smc2_ioports(void) +static void setup_smc2_ioports(struct fs_uart_platform_info*) { immap_t *immap = (immap_t *) IMAP_ADDR; unsigned *bcsr_io; diff --git a/arch/ppc/platforms/mpc885ads_setup.c b/arch/ppc/platforms/mpc885ads_setup.c index 5dfa4e6c2af..bf388ed04d4 100644 --- a/arch/ppc/platforms/mpc885ads_setup.c +++ b/arch/ppc/platforms/mpc885ads_setup.c @@ -161,7 +161,7 @@ void __init board_init(void) #endif } -static void setup_fec1_ioports(void) +static void setup_fec1_ioports(struct fs_platform_info*) { immap_t *immap = (immap_t *) IMAP_ADDR; @@ -181,7 +181,7 @@ static void setup_fec1_ioports(void) clrbits32(&immap->im_cpm.cp_cptr, 0x00000100); } -static void setup_fec2_ioports(void) +static void setup_fec2_ioports(struct fs_platform_info*) { immap_t *immap = (immap_t *) IMAP_ADDR; @@ -193,7 +193,7 @@ static void setup_fec2_ioports(void) clrbits32(&immap->im_cpm.cp_cptr, 0x00000080); } -static void setup_scc3_ioports(void) +static void setup_scc3_ioports(struct fs_platform_info*) { immap_t *immap = (immap_t *) IMAP_ADDR; unsigned *bcsr_io; @@ -315,7 +315,7 @@ static void __init mpc885ads_fixup_scc_enet_pdata(struct platform_device *pdev, mpc885ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1); } -static void setup_smc1_ioports(void) +static void setup_smc1_ioports(struct fs_uart_platform_info*) { immap_t *immap = (immap_t *) IMAP_ADDR; unsigned *bcsr_io; @@ -335,7 +335,7 @@ static void setup_smc1_ioports(void) clrbits16(&immap->im_cpm.cp_pbodr, iobits); } -static void setup_smc2_ioports(void) +static void setup_smc2_ioports(struct fs_uart_platform_info*) { immap_t *immap = (immap_t *) IMAP_ADDR; unsigned *bcsr_io; diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c index df62506a178..f358ee61d9b 100644 --- a/drivers/net/fs_enet/fs_enet-main.c +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -971,7 +971,7 @@ static struct net_device *fs_init_instance(struct device *dev, dev_set_drvdata(dev, ndev); fep->fpi = fpi; if (fpi->init_ioports) - fpi->init_ioports(); + fpi->init_ioports((struct fs_platform_info *)fpi); #ifdef CONFIG_FS_ENET_HAS_FEC if (fs_get_fec_index(fpi->fs_no) >= 0) diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index dfa06b64495..24613a68f5c 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -1180,7 +1180,7 @@ static int __init cpm_uart_console_setup(struct console *co, char *options) pdata = pdev->dev.platform_data; if (pdata) if (pdata->init_ioports) - pdata->init_ioports(); + pdata->init_ioports(pdata); cpm_uart_drv_get_platform_data(pdev, 1); } @@ -1269,7 +1269,7 @@ static int cpm_uart_drv_probe(struct device *dev) return ret; if (pdata->init_ioports) - pdata->init_ioports(); + pdata->init_ioports(pdata); ret = uart_add_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port); diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h index bd6623aed38..220cc2debe0 100644 --- a/include/asm-ppc/cpm2.h +++ b/include/asm-ppc/cpm2.h @@ -1196,5 +1196,58 @@ typedef struct im_idma { #define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1) #define FCC3_MEM_OFFSET FCC_MEM_OFFSET(2) +/* Clocks and GRG's */ + +enum cpm_clk_dir { + CPM_CLK_RX, + CPM_CLK_TX, + CPM_CLK_RTX +}; + +enum cpm_clk_target { + CPM_CLK_SCC1, + CPM_CLK_SCC2, + CPM_CLK_SCC3, + CPM_CLK_SCC4, + CPM_CLK_FCC1, + CPM_CLK_FCC2, + CPM_CLK_FCC3 +}; + +enum cpm_clk { + CPM_CLK_NONE = 0, + CPM_BRG1, /* Baud Rate Generator 1 */ + CPM_BRG2, /* Baud Rate Generator 2 */ + CPM_BRG3, /* Baud Rate Generator 3 */ + CPM_BRG4, /* Baud Rate Generator 4 */ + CPM_BRG5, /* Baud Rate Generator 5 */ + CPM_BRG6, /* Baud Rate Generator 6 */ + CPM_BRG7, /* Baud Rate Generator 7 */ + CPM_BRG8, /* Baud Rate Generator 8 */ + CPM_CLK1, /* Clock 1 */ + CPM_CLK2, /* Clock 2 */ + CPM_CLK3, /* Clock 3 */ + CPM_CLK4, /* Clock 4 */ + CPM_CLK5, /* Clock 5 */ + CPM_CLK6, /* Clock 6 */ + CPM_CLK7, /* Clock 7 */ + CPM_CLK8, /* Clock 8 */ + CPM_CLK9, /* Clock 9 */ + CPM_CLK10, /* Clock 10 */ + CPM_CLK11, /* Clock 11 */ + CPM_CLK12, /* Clock 12 */ + CPM_CLK13, /* Clock 13 */ + CPM_CLK14, /* Clock 14 */ + CPM_CLK15, /* Clock 15 */ + CPM_CLK16, /* Clock 16 */ + CPM_CLK17, /* Clock 17 */ + CPM_CLK18, /* Clock 18 */ + CPM_CLK19, /* Clock 19 */ + CPM_CLK20, /* Clock 20 */ + CPM_CLK_DUMMY +}; + +extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode); + #endif /* __CPM2__ */ #endif /* __KERNEL__ */ diff --git a/include/linux/fs_enet_pd.h b/include/linux/fs_enet_pd.h index 74ed35a00a9..932223550ac 100644 --- a/include/linux/fs_enet_pd.h +++ b/include/linux/fs_enet_pd.h @@ -87,18 +87,20 @@ struct fs_mii_bb_platform_info { }; struct fs_platform_info { - - void(*init_ioports)(void); + + void(*init_ioports)(struct fs_platform_info *); /* device specific information */ int fs_no; /* controller index */ u32 cp_page; /* CPM page */ u32 cp_block; /* CPM sblock */ - + u32 clk_trx; /* some stuff for pins & mux configuration*/ + u32 clk_rx; + u32 clk_tx; u32 clk_route; u32 clk_mask; - + u32 mem_offset; u32 dpram_offset; u32 fcc_regs_c; diff --git a/include/linux/fs_uart_pd.h b/include/linux/fs_uart_pd.h index f5975126b71..a99a020f95c 100644 --- a/include/linux/fs_uart_pd.h +++ b/include/linux/fs_uart_pd.h @@ -46,7 +46,7 @@ static inline int fs_uart_id_fsid2smc(int id) } struct fs_uart_platform_info { - void(*init_ioports)(void); + void(*init_ioports)(struct fs_uart_platform_info *); /* device specific information */ int fs_no; /* controller index */ u32 uart_clk; @@ -55,6 +55,8 @@ struct fs_uart_platform_info { u8 rx_num_fifo; u8 rx_buf_size; u8 brg; + u8 clk_rx; + u8 clk_tx; }; #endif -- cgit v1.2.3 From 611a15afcdaacec6efba984c7eb089b853564bdf Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Thu, 21 Sep 2006 22:38:05 +0400 Subject: POWERPC: Bring the fs_no calculation to the relevant SoC enumeration The fs_no mean used to be fs_enet driver driven, hence it was an enumeration across all the possible fs_enet "users" in the SoC. Now, with QE on the pipeline, and to make DTS descriptions more clear, fs_no features relevant SoC part number, with additional field to describe the SoC type. Another reason for that is now not only fs_enet is going to utilize those stuff. There might be UART, HLDC, and even USB, so to prevent confusion and be ready for upcoming OF_device transfer, fs_enet and cpm_uart drivers were updated in that concern, as well as the relevant DTS. Signed-off-by: Vitaly Bordug --- arch/powerpc/boot/dts/mpc8560ads.dts | 8 +++---- arch/powerpc/sysdev/fsl_soc.c | 8 ++++++- drivers/net/fs_enet/fs_enet-main.c | 3 ++- drivers/serial/cpm_uart/cpm_uart_core.c | 9 +++++--- include/linux/fs_enet_pd.h | 37 +++++++++++++++++++++++++++++++++ include/linux/fs_uart_pd.h | 10 +++++++++ 6 files changed, 66 insertions(+), 9 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index ba5c943a6fe..2b168486aeb 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -244,7 +244,7 @@ device_type = "serial"; compatible = "cpm_uart"; model = "SCC"; - device-id = <2>; + device-id = <1>; reg = <91a00 20 88000 100>; clock-setup = <00ffffff 0>; rx-clock = <1>; @@ -258,7 +258,7 @@ device_type = "serial"; compatible = "cpm_uart"; model = "SCC"; - device-id = <3>; + device-id = <2>; reg = <91a20 20 88100 100>; clock-setup = ; rx-clock = <2>; @@ -272,7 +272,7 @@ device_type = "network"; compatible = "fs_enet"; model = "FCC"; - device-id = <3>; + device-id = <2>; reg = <91320 20 88500 100 913a0 30>; mac-address = [ 00 00 0C 00 02 FD ]; clock-setup = ; @@ -287,7 +287,7 @@ device_type = "network"; compatible = "fs_enet"; model = "FCC"; - device-id = <4>; + device-id = <3>; reg = <91340 20 88600 100 913d0 30>; mac-address = [ 00 00 0C 00 03 FD ]; clock-setup = ; diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 4e72bb98363..022ed275ea6 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -622,6 +622,7 @@ static int __init fs_enet_of_init(void) id = get_property(np, "device-id", NULL); fs_enet_data.fs_no = *id; + strcpy(fs_enet_data.fs_type, model); mdio = of_get_parent(phy); ret = of_address_to_resource(mdio, 0, &res); @@ -635,7 +636,7 @@ static int __init fs_enet_of_init(void) fs_enet_data.clk_tx = *((u32 *) get_property(np, "tx-clock", NULL)); if (strstr(model, "FCC")) { - int fcc_index = fs_get_fcc_index(*id); + int fcc_index = *id - 1; fs_enet_data.dpram_offset = (u32)cpm_dpram_addr(0); fs_enet_data.rx_ring = 32; @@ -688,6 +689,7 @@ static int __init cpm_uart_of_init(void) struct resource r[3]; struct fs_uart_platform_info cpm_uart_data; const int *id; + const char *model; memset(r, 0, sizeof(r)); memset(&cpm_uart_data, 0, sizeof(cpm_uart_data)); @@ -716,6 +718,10 @@ static int __init cpm_uart_of_init(void) id = get_property(np, "device-id", NULL); cpm_uart_data.fs_no = *id; + + model = (char*)get_property(np, "model", NULL); + strcpy(cpm_uart_data.fs_type, model); + cpm_uart_data.uart_clk = ppc_proc_freq; cpm_uart_data.tx_num_fifo = 4; diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c index f358ee61d9b..3e2a3a20d50 100644 --- a/drivers/net/fs_enet/fs_enet-main.c +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -944,12 +944,13 @@ extern int fs_mii_connect(struct net_device *dev); extern void fs_mii_disconnect(struct net_device *dev); static struct net_device *fs_init_instance(struct device *dev, - const struct fs_platform_info *fpi) + struct fs_platform_info *fpi) { struct net_device *ndev = NULL; struct fs_enet_private *fep = NULL; int privsize, i, r, err = 0, registered = 0; + fpi->fs_no = fs_get_id(fpi); /* guard */ if ((unsigned int)fpi->fs_no >= FS_MAX_INDEX) return ERR_PTR(-EINVAL); diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index 24613a68f5c..a0d6136deb9 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -1023,15 +1023,17 @@ int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con) { struct resource *r; struct fs_uart_platform_info *pdata = pdev->dev.platform_data; - int idx = pdata->fs_no; /* It is UART_SMCx or UART_SCCx index */ + int idx; /* It is UART_SMCx or UART_SCCx index */ struct uart_cpm_port *pinfo; int line; u32 mem, pram; + idx = pdata->fs_no = fs_uart_get_id(pdata); + line = cpm_uart_id2nr(idx); if(line < 0) { printk(KERN_ERR"%s(): port %d is not registered", __FUNCTION__, idx); - return -1; + return -EINVAL; } pinfo = (struct uart_cpm_port *) &cpm_uart_ports[idx]; @@ -1263,11 +1265,12 @@ static int cpm_uart_drv_probe(struct device *dev) } pdata = pdev->dev.platform_data; - pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n", cpm_uart_id2nr(pdata->fs_no)); if ((ret = cpm_uart_drv_get_platform_data(pdev, 0))) return ret; + pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n", cpm_uart_id2nr(pdata->fs_no)); + if (pdata->init_ioports) pdata->init_ioports(pdata); diff --git a/include/linux/fs_enet_pd.h b/include/linux/fs_enet_pd.h index 932223550ac..543cd3cd9e7 100644 --- a/include/linux/fs_enet_pd.h +++ b/include/linux/fs_enet_pd.h @@ -55,6 +55,30 @@ static inline int fs_get_scc_index(enum fs_id id) return -1; } +static inline int fs_fec_index2id(int index) +{ + int id = fsid_fec1 + index - 1; + if (id >= fsid_fec1 && id <= fsid_fec2) + return id; + return FS_MAX_INDEX; + } + +static inline int fs_fcc_index2id(int index) +{ + int id = fsid_fcc1 + index - 1; + if (id >= fsid_fcc1 && id <= fsid_fcc3) + return id; + return FS_MAX_INDEX; +} + +static inline int fs_scc_index2id(int index) +{ + int id = fsid_scc1 + index - 1; + if (id >= fsid_scc1 && id <= fsid_scc4) + return id; + return FS_MAX_INDEX; +} + enum fs_mii_method { fsmii_fixed, fsmii_fec, @@ -91,6 +115,7 @@ struct fs_platform_info { void(*init_ioports)(struct fs_platform_info *); /* device specific information */ int fs_no; /* controller index */ + char fs_type[4]; /* controller type */ u32 cp_page; /* CPM page */ u32 cp_block; /* CPM sblock */ @@ -126,4 +151,16 @@ struct fs_mii_fec_platform_info { u32 irq[32]; u32 mii_speed; }; + +static inline int fs_get_id(struct fs_platform_info *fpi) +{ + if(strstr(fpi->fs_type, "SCC")) + return fs_scc_index2id(fpi->fs_no); + if(strstr(fpi->fs_type, "FCC")) + return fs_fcc_index2id(fpi->fs_no); + if(strstr(fpi->fs_type, "FEC")) + return fs_fec_index2id(fpi->fs_no); + return fpi->fs_no; +} + #endif diff --git a/include/linux/fs_uart_pd.h b/include/linux/fs_uart_pd.h index a99a020f95c..809bb9ffc78 100644 --- a/include/linux/fs_uart_pd.h +++ b/include/linux/fs_uart_pd.h @@ -49,6 +49,7 @@ struct fs_uart_platform_info { void(*init_ioports)(struct fs_uart_platform_info *); /* device specific information */ int fs_no; /* controller index */ + char fs_type[4]; /* controller type */ u32 uart_clk; u8 tx_num_fifo; u8 tx_buf_size; @@ -59,4 +60,13 @@ struct fs_uart_platform_info { u8 clk_tx; }; +static inline int fs_uart_get_id(struct fs_uart_platform_info *fpi) +{ + if(strstr(fpi->fs_type, "SMC")) + return fs_uart_id_smc2fsid(fpi->fs_no); + if(strstr(fpi->fs_type, "SCC")) + return fs_uart_id_scc2fsid(fpi->fs_no); + return fpi->fs_no; +} + #endif -- cgit v1.2.3 From 4b9c876a812fd3e2b17e2d1c94082ee4cf31608f Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 22 Sep 2006 09:23:53 +0100 Subject: [POWERPC] Fix audit syscall success/failure reporting on PowerPC Due to my stupidity, we were checking for the wrong bit in CCR when attempting to determine whether a syscall succeeded or not. Remedy the symptom, if not the cause. Signed-off-by: David Woodhouse Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/ptrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index dea75d73f98..cf1d1bc4926 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -553,7 +553,7 @@ void do_syscall_trace_leave(struct pt_regs *regs) #endif if (unlikely(current->audit_context)) - audit_syscall_exit((regs->ccr&0x1000)?AUDITSC_FAILURE:AUDITSC_SUCCESS, + audit_syscall_exit((regs->ccr&0x10000000)?AUDITSC_FAILURE:AUDITSC_SUCCESS, regs->result); if ((test_thread_flag(TIF_SYSCALL_TRACE) -- cgit v1.2.3 From 94983cb7881dff760d724759105a6f67935b571d Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 22 Sep 2006 09:32:45 +0100 Subject: [POWERPC] Fix PPC32 SECCOMP, unexport do_syscall_trace_{enter,leave} The secure_computing() call which automatically aborts a process if it tries to execute a syscall it shouldn't is much more useful if we actually do it _before_ the syscall, rather than afterwards. PPC64 got this right, but the original incorrect behaviour inherited from arch/ppc was preserved by ifdefs. Make it the same on PPC32 too. Also, I see no need to export do_syscall_trace_{leave,enter} on ppc32 -- they were only exported because the old do_syscall_trace() (which they replaced) used to be. Signed-off-by: David Woodhouse Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/ptrace.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index cf1d1bc4926..975102a020d 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -526,9 +526,7 @@ static void do_syscall_trace(void) void do_syscall_trace_enter(struct pt_regs *regs) { -#ifdef CONFIG_PPC64 secure_computing(regs->gpr[0]); -#endif if (test_thread_flag(TIF_SYSCALL_TRACE) && (current->ptrace & PT_PTRACED)) @@ -548,10 +546,6 @@ void do_syscall_trace_enter(struct pt_regs *regs) void do_syscall_trace_leave(struct pt_regs *regs) { -#ifdef CONFIG_PPC32 - secure_computing(regs->gpr[0]); -#endif - if (unlikely(current->audit_context)) audit_syscall_exit((regs->ccr&0x10000000)?AUDITSC_FAILURE:AUDITSC_SUCCESS, regs->result); @@ -561,8 +555,3 @@ void do_syscall_trace_leave(struct pt_regs *regs) && (current->ptrace & PT_PTRACED)) do_syscall_trace(); } - -#ifdef CONFIG_PPC32 -EXPORT_SYMBOL(do_syscall_trace_enter); -EXPORT_SYMBOL(do_syscall_trace_leave); -#endif -- cgit v1.2.3 From e12514650b167f48e952d50315fd492d01d42988 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 2 Aug 2006 10:48:50 +1000 Subject: [POWERPC] Fix loop logic in irq_alloc_virt() There's a bug in irq_alloc_virt() if it's asked for more than 1 interrupt, if it can't find a slot it might look past the end of the irq_map. To be clear: the bug is that the continue affects the inner for loop, not the outer one, so i becomes j + 1 and then we continue the inner loop without checking if i is still <= limit. This fixes it. No one in the kernel actually calls this with count > 1, so it's not critical. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/irq.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index b4432332341..c3f58f2f9f5 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -777,7 +777,6 @@ unsigned int irq_alloc_virt(struct irq_host *host, { unsigned long flags; unsigned int i, j, found = NO_IRQ; - unsigned int limit = irq_virq_count - count; if (count == 0 || count > (irq_virq_count - NUM_ISA_INTERRUPTS)) return NO_IRQ; @@ -794,14 +793,16 @@ unsigned int irq_alloc_virt(struct irq_host *host, /* Look for count consecutive numbers in the allocatable * (non-legacy) space */ - for (i = NUM_ISA_INTERRUPTS; i <= limit; ) { - for (j = i; j < (i + count); j++) - if (irq_map[j].host != NULL) { - i = j + 1; - continue; - } - found = i; - break; + for (i = NUM_ISA_INTERRUPTS, j = 0; i < irq_virq_count; i++) { + if (irq_map[i].host != NULL) + j = 0; + else + j++; + + if (j == count) { + found = i - count + 1; + break; + } } if (found == NO_IRQ) { spin_unlock_irqrestore(&irq_big_lock, flags); -- cgit v1.2.3 From 0ddd3e7d07d6adc4e905ee869a85db5184a02c17 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Fri, 22 Sep 2006 20:30:14 +1000 Subject: [POWERPC] Always call cede in pseries dedicated idle loop The smt_snooze_delay logic changed a bit when the idle loops were consolidated. A value of 0 used to mean we always polled, now it means we always sleep. Instead of restoring the old behaviour, lets put a reasonable default in smt_snooze_delay. This means we spin for a bit (in case an external interrupt comes in) and then sleep. Also the pseries dedicated idle loop currently does not cede both threads in an SMT pair. The hypervisor wants us to call in so it can power manage, so lets do that. Signed-off-by: Anton Blanchard Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/sysfs.c | 4 ++-- arch/powerpc/platforms/pseries/setup.c | 24 +++--------------------- 2 files changed, 5 insertions(+), 23 deletions(-) diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 406f308ddea..d45a168bdac 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -25,8 +25,8 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices); /* SMT stuff */ #ifdef CONFIG_PPC_MULTIPLATFORM -/* default to snooze disabled */ -DEFINE_PER_CPU(unsigned long, smt_snooze_delay); +/* Time in microseconds we delay before sleeping in the idle loop */ +DEFINE_PER_CPU(unsigned long, smt_snooze_delay) = { 100 }; static ssize_t store_smt_snooze_delay(struct sys_device *dev, const char *buf, size_t count) diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index a6398fbe530..2551da46b2a 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -477,7 +477,6 @@ static void pseries_dedicated_idle_sleep(void) { unsigned int cpu = smp_processor_id(); unsigned long start_snooze; - unsigned long *smt_snooze_delay = &__get_cpu_var(smt_snooze_delay); /* * Indicate to the HV that we are idle. Now would be @@ -490,9 +489,9 @@ static void pseries_dedicated_idle_sleep(void) * has been checked recently. If we should poll for a little * while, do so. */ - if (*smt_snooze_delay) { + if (__get_cpu_var(smt_snooze_delay)) { start_snooze = get_tb() + - *smt_snooze_delay * tb_ticks_per_usec; + __get_cpu_var(smt_snooze_delay) * tb_ticks_per_usec; local_irq_enable(); set_thread_flag(TIF_POLLING_NRFLAG); @@ -512,24 +511,7 @@ static void pseries_dedicated_idle_sleep(void) goto out; } - /* - * If not SMT, cede processor. If CPU is running SMT - * cede if the other thread is not idle, so that it can - * go single-threaded. If the other thread is idle, - * we ask the hypervisor if it has pending work it - * wants to do and cede if it does. Otherwise we keep - * polling in order to reduce interrupt latency. - * - * Doing the cede when the other thread is active will - * result in this thread going dormant, meaning the other - * thread gets to run in single-threaded (ST) mode, which - * is slightly faster than SMT mode with this thread at - * very low priority. The cede enables interrupts, which - * doesn't matter here. - */ - if (!cpu_has_feature(CPU_FTR_SMT) || !lppaca[cpu ^ 1].idle - || poll_pending() == H_PENDING) - cede_processor(); + cede_processor(); out: HMT_medium(); -- cgit v1.2.3 From 8306e511d2d95d912fe2d879a0fe115b4b6d360d Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Mon, 25 Sep 2006 21:55:19 -0500 Subject: [POWERPC] update mpc8349_itx_defconfig and remove some debug settings update mpc8349_itx_defconfig and turn off some debug settings Signed-off-by: Kim Phillips Signed-off-by: Paul Mackerras --- arch/powerpc/configs/mpc834x_itx_defconfig | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/arch/powerpc/configs/mpc834x_itx_defconfig b/arch/powerpc/configs/mpc834x_itx_defconfig index 8da6a47f033..ea55bab759c 100644 --- a/arch/powerpc/configs/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/mpc834x_itx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc6 -# Sun Sep 10 10:28:05 2006 +# Linux kernel version: 2.6.18 +# Mon Sep 25 19:41:14 2006 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -21,6 +21,7 @@ CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y CONFIG_DEFAULT_UIMAGE=y # @@ -61,25 +62,25 @@ CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y +CONFIG_SYSCTL=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y # CONFIG_EPOLL is not set CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -259,7 +260,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -313,6 +313,7 @@ CONFIG_MTD_CHAR=y # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -1277,11 +1278,11 @@ CONFIG_PLIST=y # # Kernel hacking # -CONFIG_PRINTK_TIME=y +# CONFIG_PRINTK_TIME is not set # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=17 +CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set @@ -1293,15 +1294,15 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUGGER is not set # CONFIG_BDI_SWITCH is not set -CONFIG_BOOTX_TEXT=y -CONFIG_SERIAL_TEXT_DEBUG=y +# CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1314,6 +1315,8 @@ CONFIG_SERIAL_TEXT_DEBUG=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +# CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set @@ -1323,6 +1326,8 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set -- cgit v1.2.3 From 054e51a44bc63878430c30b137be20600bcf01e0 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 23 Sep 2006 01:37:41 +0100 Subject: [POWERPC] ppc math-emu needs -fno-builtin-fabs for math.c and fabs.c ... since they deal with internal function with that name. Signed-off-by: Al Viro Signed-off-by: Paul Mackerras --- arch/powerpc/math-emu/Makefile | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/powerpc/math-emu/Makefile b/arch/powerpc/math-emu/Makefile index 754143e8936..29bc9126241 100644 --- a/arch/powerpc/math-emu/Makefile +++ b/arch/powerpc/math-emu/Makefile @@ -11,3 +11,6 @@ obj-$(CONFIG_MATH_EMULATION) += fabs.o fadd.o fadds.o fcmpo.o fcmpu.o \ mcrfs.o mffs.o mtfsb0.o mtfsb1.o \ mtfsf.o mtfsfi.o stfiwx.o stfs.o \ udivmodti4.o + +CFLAGS_fabs.o = -fno-builtin-fabs +CFLAGS_math.o = -fno-builtin-fabs -- cgit v1.2.3 From e45d6634e57315f09f4522365146da523453f859 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 23 Sep 2006 01:37:41 +0100 Subject: [POWERPC] NULL noise removal: spufs Signed-off-by: Al Viro Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spufs/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 58e794f9da1..51fd197ab5d 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -1342,7 +1342,7 @@ static u64 spufs_id_get(void *data) return num; } -DEFINE_SIMPLE_ATTRIBUTE(spufs_id_ops, spufs_id_get, 0, "0x%llx\n") +DEFINE_SIMPLE_ATTRIBUTE(spufs_id_ops, spufs_id_get, NULL, "0x%llx\n") struct tree_descr spufs_dir_contents[] = { { "mem", &spufs_mem_fops, 0666, }, -- cgit v1.2.3 From ed2bfcd2deeb0970654d06231f254c5d33140062 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 23 Sep 2006 01:37:41 +0100 Subject: [POWERPC] cell spufs iomem annotations Signed-off-by: Al Viro Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spu_base.c | 4 ++-- arch/powerpc/platforms/cell/spufs/hw_ops.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 3bd36d46ab4..0f5c8ebc7fc 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -538,7 +538,7 @@ static void __iomem * __init map_spe_prop(struct spu *spu, const void *p; int proplen; - void* ret = NULL; + void __iomem *ret = NULL; int err = 0; p = get_property(n, name, &proplen); @@ -562,7 +562,7 @@ static void spu_unmap(struct spu *spu) iounmap(spu->priv2); iounmap(spu->priv1); iounmap(spu->problem); - iounmap((u8 __iomem *)spu->local_store); + iounmap((__force u8 __iomem *)spu->local_store); } /* This function shall be abstracted for HV platforms */ diff --git a/arch/powerpc/platforms/cell/spufs/hw_ops.c b/arch/powerpc/platforms/cell/spufs/hw_ops.c index c8670f51973..efc452e71ab 100644 --- a/arch/powerpc/platforms/cell/spufs/hw_ops.c +++ b/arch/powerpc/platforms/cell/spufs/hw_ops.c @@ -234,7 +234,7 @@ static void spu_hw_runcntl_stop(struct spu_context *ctx) static int spu_hw_set_mfc_query(struct spu_context * ctx, u32 mask, u32 mode) { - struct spu_problem *prob = ctx->spu->problem; + struct spu_problem __iomem *prob = ctx->spu->problem; int ret; spin_lock_irq(&ctx->spu->register_lock); @@ -263,7 +263,7 @@ static int spu_hw_send_mfc_command(struct spu_context *ctx, struct mfc_dma_command *cmd) { u32 status; - struct spu_problem *prob = ctx->spu->problem; + struct spu_problem __iomem *prob = ctx->spu->problem; spin_lock_irq(&ctx->spu->register_lock); out_be32(&prob->mfc_lsa_W, cmd->lsa); -- cgit v1.2.3 From 62034f03380a64c0144b6721f4a2aa55d65346c1 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 23 Sep 2006 01:37:41 +0100 Subject: [POWERPC] powerpc oprofile __user annotations Signed-off-by: Al Viro Signed-off-by: Paul Mackerras --- arch/powerpc/oprofile/backtrace.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/oprofile/backtrace.c b/arch/powerpc/oprofile/backtrace.c index 75f57bc96b4..b4278cfd1f8 100644 --- a/arch/powerpc/oprofile/backtrace.c +++ b/arch/powerpc/oprofile/backtrace.c @@ -11,6 +11,7 @@ #include #include #include +#include #define STACK_SP(STACK) *(STACK) @@ -26,8 +27,9 @@ static unsigned int user_getsp32(unsigned int sp, int is_first) { unsigned int stack_frame[2]; + void __user *p = compat_ptr(sp); - if (!access_ok(VERIFY_READ, sp, sizeof(stack_frame))) + if (!access_ok(VERIFY_READ, p, sizeof(stack_frame))) return 0; /* @@ -35,8 +37,7 @@ static unsigned int user_getsp32(unsigned int sp, int is_first) * which means that we've done all that we can do from * interrupt context. */ - if (__copy_from_user_inatomic(stack_frame, (void *)(long)sp, - sizeof(stack_frame))) + if (__copy_from_user_inatomic(stack_frame, p, sizeof(stack_frame))) return 0; if (!is_first) @@ -54,10 +55,10 @@ static unsigned long user_getsp64(unsigned long sp, int is_first) { unsigned long stack_frame[3]; - if (!access_ok(VERIFY_READ, sp, sizeof(stack_frame))) + if (!access_ok(VERIFY_READ, (void __user *)sp, sizeof(stack_frame))) return 0; - if (__copy_from_user_inatomic(stack_frame, (void *)sp, + if (__copy_from_user_inatomic(stack_frame, (void __user *)sp, sizeof(stack_frame))) return 0; -- cgit v1.2.3 From 8c42ec2c99502f8a81076f24f57775b9c646351a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 23 Sep 2006 01:37:41 +0100 Subject: [POWERPC] maple/pci iomem annotations Signed-off-by: Al Viro Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/maple/pci.c | 60 +++++++++++++++++++------------------- 1 file changed, 30 insertions(+), 30 deletions(-) diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index c3aa46b8e2b..1b827618e05 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -96,14 +96,14 @@ static unsigned long u3_agp_cfa1(u8 bus, u8 devfn, u8 off) 1UL; } -static unsigned long u3_agp_cfg_access(struct pci_controller* hose, +static volatile void __iomem *u3_agp_cfg_access(struct pci_controller* hose, u8 bus, u8 dev_fn, u8 offset) { unsigned int caddr; if (bus == hose->first_busno) { if (dev_fn < (11 << 3)) - return 0; + return NULL; caddr = u3_agp_cfa0(dev_fn, offset); } else caddr = u3_agp_cfa1(bus, dev_fn, offset); @@ -114,14 +114,14 @@ static unsigned long u3_agp_cfg_access(struct pci_controller* hose, } while (in_le32(hose->cfg_addr) != caddr); offset &= 0x07; - return ((unsigned long)hose->cfg_data) + offset; + return hose->cfg_data + offset; } static int u3_agp_read_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 *val) { struct pci_controller *hose; - unsigned long addr; + volatile void __iomem *addr; hose = pci_bus_to_host(bus); if (hose == NULL) @@ -136,13 +136,13 @@ static int u3_agp_read_config(struct pci_bus *bus, unsigned int devfn, */ switch (len) { case 1: - *val = in_8((u8 *)addr); + *val = in_8(addr); break; case 2: - *val = in_le16((u16 *)addr); + *val = in_le16(addr); break; default: - *val = in_le32((u32 *)addr); + *val = in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; @@ -152,7 +152,7 @@ static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 val) { struct pci_controller *hose; - unsigned long addr; + volatile void __iomem *addr; hose = pci_bus_to_host(bus); if (hose == NULL) @@ -167,16 +167,16 @@ static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn, */ switch (len) { case 1: - out_8((u8 *)addr, val); - (void) in_8((u8 *)addr); + out_8(addr, val); + (void) in_8(addr); break; case 2: - out_le16((u16 *)addr, val); - (void) in_le16((u16 *)addr); + out_le16(addr, val); + (void) in_le16(addr); break; default: - out_le32((u32 *)addr, val); - (void) in_le32((u32 *)addr); + out_le32(addr, val); + (void) in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; @@ -198,22 +198,22 @@ static unsigned long u3_ht_cfa1(u8 bus, u8 devfn, u8 off) return u3_ht_cfa0(devfn, off) + (bus << 16) + 0x01000000UL; } -static unsigned long u3_ht_cfg_access(struct pci_controller* hose, +static volatile void __iomem *u3_ht_cfg_access(struct pci_controller* hose, u8 bus, u8 devfn, u8 offset) { if (bus == hose->first_busno) { if (PCI_SLOT(devfn) == 0) - return 0; - return ((unsigned long)hose->cfg_data) + u3_ht_cfa0(devfn, offset); + return NULL; + return hose->cfg_data + u3_ht_cfa0(devfn, offset); } else - return ((unsigned long)hose->cfg_data) + u3_ht_cfa1(bus, devfn, offset); + return hose->cfg_data + u3_ht_cfa1(bus, devfn, offset); } static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 *val) { struct pci_controller *hose; - unsigned long addr; + volatile void __iomem *addr; hose = pci_bus_to_host(bus); if (hose == NULL) @@ -232,13 +232,13 @@ static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, */ switch (len) { case 1: - *val = in_8((u8 *)addr); + *val = in_8(addr); break; case 2: - *val = in_le16((u16 *)addr); + *val = in_le16(addr); break; default: - *val = in_le32((u32 *)addr); + *val = in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; @@ -248,7 +248,7 @@ static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 val) { struct pci_controller *hose; - unsigned long addr; + volatile void __iomem *addr; hose = pci_bus_to_host(bus); if (hose == NULL) @@ -266,16 +266,16 @@ static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, */ switch (len) { case 1: - out_8((u8 *)addr, val); - (void) in_8((u8 *)addr); + out_8(addr, val); + (void) in_8(addr); break; case 2: - out_le16((u16 *)addr, val); - (void) in_le16((u16 *)addr); + out_le16(addr, val); + (void) in_le16(addr); break; default: - out_le32((u32 *)addr, val); - (void) in_le32((u32 *)addr); + out_le32(addr, val); + (void) in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; @@ -315,7 +315,7 @@ static void __init setup_u3_ht(struct pci_controller* hose) * the reg address cell, we shall fix that by killing struct * reg_property and using some accessor functions instead */ - hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000); + hose->cfg_data = ioremap(0xf2000000, 0x02000000); hose->first_busno = 0; hose->last_busno = 0xef; -- cgit v1.2.3 From c32527a14049130eb29103b8da27520f07092371 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 23 Sep 2006 01:37:41 +0100 Subject: [POWERPC] rewrite mkprep and mkbugboot in sane C Signed-off-by: Al Viro Signed-off-by: Paul Mackerras --- arch/ppc/boot/utils/mkbugboot.c | 208 ++++++++------------ arch/ppc/boot/utils/mkprep.c | 416 ++++++++++++++++++---------------------- 2 files changed, 267 insertions(+), 357 deletions(-) diff --git a/arch/ppc/boot/utils/mkbugboot.c b/arch/ppc/boot/utils/mkbugboot.c index 29115e01f60..1640c4199ca 100644 --- a/arch/ppc/boot/utils/mkbugboot.c +++ b/arch/ppc/boot/utils/mkbugboot.c @@ -19,36 +19,13 @@ #include #include #include +#include #ifdef __sun__ #include #else #include #endif -#ifdef __i386__ -#define cpu_to_be32(x) le32_to_cpu(x) -#define cpu_to_be16(x) le16_to_cpu(x) -#else -#define cpu_to_be32(x) (x) -#define cpu_to_be16(x) (x) -#endif - -#define cpu_to_le32(x) le32_to_cpu((x)) -unsigned long le32_to_cpu(unsigned long x) -{ - return (((x & 0x000000ffU) << 24) | - ((x & 0x0000ff00U) << 8) | - ((x & 0x00ff0000U) >> 8) | - ((x & 0xff000000U) >> 24)); -} - -#define cpu_to_le16(x) le16_to_cpu((x)) -unsigned short le16_to_cpu(unsigned short x) -{ - return (((x & 0x00ff) << 8) | - ((x & 0xff00) >> 8)); -} - /* size of read buffer */ #define SIZE 0x1000 @@ -62,124 +39,109 @@ typedef struct bug_boot_header { #define HEADER_SIZE sizeof(bug_boot_header_t) -uint32_t copy_image(int32_t in_fd, int32_t out_fd) +void update_checksum(void *buf, size_t size, uint16_t *sum) { - uint8_t buf[SIZE]; - int n; - uint32_t image_size = 0; - uint8_t zero = 0; - - lseek(in_fd, ELF_HEADER_SIZE, SEEK_SET); - - /* Copy an image while recording its size */ - while ( (n = read(in_fd, buf, SIZE)) > 0 ) - { - image_size = image_size + n; - write(out_fd, buf, n); - } - - /* BUG romboot requires that our size is divisible by 2 */ - /* align image to 2 byte boundary */ - if (image_size % 2) - { - image_size++; - write(out_fd, &zero, 1); - } - - return image_size; + uint32_t csum = *sum; + + while (size) { + csum += *(uint16_t *)buf; + if (csum > 0xffff) + csum -= 0xffff; + buf = (uint16_t *)buf + 1; + size -= 2; + } + *sum = csum; } -void write_bugboot_header(int32_t out_fd, uint32_t boot_size) +uint32_t copy_image(int in_fd, int out_fd, uint16_t *sum) { - uint8_t header_block[HEADER_SIZE]; - bug_boot_header_t *bbh = (bug_boot_header_t *)&header_block[0]; - - memset(header_block, 0, HEADER_SIZE); - - /* Fill in the PPCBUG ROM boot header */ - strncpy(bbh->magic_word, "BOOT", 4); /* PPCBUG magic word */ - bbh->entry_offset = cpu_to_be32(HEADER_SIZE); /* Entry address */ - bbh->routine_length= cpu_to_be32(HEADER_SIZE+boot_size+2); /* Routine length */ - strncpy(bbh->routine_name, "LINUXROM", 8); /* Routine name */ - - /* Output the header and bootloader to the file */ - write(out_fd, header_block, HEADER_SIZE); + uint8_t buf[SIZE]; + int offset = 0; + int n; + uint32_t image_size = 0; + + lseek(in_fd, ELF_HEADER_SIZE, SEEK_SET); + + /* Copy an image while recording its size */ + while ( (n = read(in_fd, buf + offset, SIZE - offset)) > 0 ) { + n += offset; + offset = n & 1; + n -= offset; + image_size = image_size + n; + /* who's going to deal with short writes? */ + write(out_fd, buf, n); + update_checksum(buf, n, sum); + if (offset) + buf[0] = buf[n]; + } + + /* BUG romboot requires that our size is divisible by 2 */ + /* align image to 2 byte boundary */ + if (offset) { + image_size += 2; + buf[1] = '\0'; + write(out_fd, buf, 2); + update_checksum(buf, 2, sum); + } + return image_size; } -uint16_t calc_checksum(int32_t bug_fd) +void write_bugboot_header(int out_fd, uint32_t boot_size, uint16_t *sum) { - uint32_t checksum_var = 0; - uint8_t buf[2]; - int n; - - /* Checksum loop */ - while ( (n = read(bug_fd, buf, 2) ) ) - { - checksum_var = checksum_var + *(uint16_t *)buf; - - /* If we carry out, mask it and add one to the checksum */ - if (checksum_var >> 16) - checksum_var = (checksum_var & 0x0000ffff) + 1; - } - - return checksum_var; + static bug_boot_header_t bbh = { + .magic_word = "BOOT", + .routine_name = "LINUXROM" + }; + + /* Fill in the PPCBUG ROM boot header */ + bbh.entry_offset = htonl(HEADER_SIZE); /* Entry address */ + bbh.routine_length= htonl(HEADER_SIZE+boot_size+2); /* Routine length */ + + /* Output the header and bootloader to the file */ + write(out_fd, &bbh, sizeof(bug_boot_header_t)); + update_checksum(&bbh, sizeof(bug_boot_header_t), sum); } int main(int argc, char *argv[]) { - int32_t image_fd, bugboot_fd; - int argptr = 1; - uint32_t kernel_size = 0; - uint16_t checksum = 0; - uint8_t bugbootname[256]; - - if ( (argc != 3) ) - { - fprintf(stderr, "usage: %s \n",argv[0]); - exit(-1); - } - - /* Get file args */ - - /* kernel image file */ - if ((image_fd = open( argv[argptr] , 0)) < 0) - exit(-1); - argptr++; + int image_fd, bugboot_fd; + uint32_t kernel_size = 0; + uint16_t checksum = 0; - /* bugboot file */ - if ( !strcmp( argv[argptr], "-" ) ) - bugboot_fd = 1; /* stdout */ - else - if ((bugboot_fd = creat( argv[argptr] , 0755)) < 0) - exit(-1); - else - strcpy(bugbootname, argv[argptr]); - argptr++; + if (argc != 3) { + fprintf(stderr, "usage: %s \n",argv[0]); + exit(-1); + } - /* Set file position after ROM header block where zImage will be written */ - lseek(bugboot_fd, HEADER_SIZE, SEEK_SET); + /* Get file args */ - /* Copy kernel image into bugboot image */ - kernel_size = copy_image(image_fd, bugboot_fd); - close(image_fd); + /* kernel image file */ + if ((image_fd = open(argv[1] , 0)) < 0) + exit(-1); - /* Set file position to beginning where header/romboot will be written */ - lseek(bugboot_fd, 0, SEEK_SET); + /* bugboot file */ + if (!strcmp(argv[2], "-")) + bugboot_fd = 1; /* stdout */ + else if ((bugboot_fd = creat(argv[2] , 0755)) < 0) + exit(-1); - /* Write out BUG header/romboot */ - write_bugboot_header(bugboot_fd, kernel_size); + /* Set file position after ROM header block where zImage will be written */ + lseek(bugboot_fd, HEADER_SIZE, SEEK_SET); - /* Close bugboot file */ - close(bugboot_fd); + /* Copy kernel image into bugboot image */ + kernel_size = copy_image(image_fd, bugboot_fd, &checksum); - /* Reopen it as read/write */ - bugboot_fd = open(bugbootname, O_RDWR); + /* Set file position to beginning where header/romboot will be written */ + lseek(bugboot_fd, 0, SEEK_SET); - /* Calculate checksum */ - checksum = calc_checksum(bugboot_fd); + /* Write out BUG header/romboot */ + write_bugboot_header(bugboot_fd, kernel_size, &checksum); - /* Write out the calculated checksum */ - write(bugboot_fd, &checksum, 2); + /* Write out the calculated checksum */ + lseek(bugboot_fd, 0, SEEK_END); + write(bugboot_fd, &checksum, 2); - return 0; + /* Close bugboot file */ + close(bugboot_fd); + return 0; } diff --git a/arch/ppc/boot/utils/mkprep.c b/arch/ppc/boot/utils/mkprep.c index f6d5a2f2fcf..192bb397126 100644 --- a/arch/ppc/boot/utils/mkprep.c +++ b/arch/ppc/boot/utils/mkprep.c @@ -15,279 +15,227 @@ * Modified for Sparc hosted builds by Peter Wahl */ -#include #include -#include #include -#include -#include -#include - -#define cpu_to_le32(x) le32_to_cpu((x)) -unsigned long le32_to_cpu(unsigned long x) -{ - return (((x & 0x000000ffU) << 24) | - ((x & 0x0000ff00U) << 8) | - ((x & 0x00ff0000U) >> 8) | - ((x & 0xff000000U) >> 24)); -} - - -#define cpu_to_le16(x) le16_to_cpu((x)) -unsigned short le16_to_cpu(unsigned short x) -{ - return (((x & 0x00ff) << 8) | - ((x & 0xff00) >> 8)); -} - -#define cpu_to_be32(x) (x) -#define be32_to_cpu(x) (x) -#define cpu_to_be16(x) (x) -#define be16_to_cpu(x) (x) +#include /* size of read buffer */ #define SIZE 0x1000 - -typedef unsigned long dword_t; -typedef unsigned short word_t; -typedef unsigned char byte_t; -typedef byte_t block_t[512]; -typedef byte_t page_t[4096]; - - /* * Partition table entry * - from the PReP spec */ typedef struct partition_entry { - byte_t boot_indicator; - byte_t starting_head; - byte_t starting_sector; - byte_t starting_cylinder; - - byte_t system_indicator; - byte_t ending_head; - byte_t ending_sector; - byte_t ending_cylinder; - - dword_t beginning_sector; - dword_t number_of_sectors; + unsigned char boot_indicator; + unsigned char starting_head; + unsigned char starting_sector; + unsigned char starting_cylinder; + + unsigned char system_indicator; + unsigned char ending_head; + unsigned char ending_sector; + unsigned char ending_cylinder; + + unsigned char beginning_sector[4]; + unsigned char number_of_sectors[4]; } partition_entry_t; #define BootActive 0x80 #define SystemPrep 0x41 -void copy_image(int , int); -void write_prep_partition(int , int ); -void write_asm_data( int in, int out ); +void copy_image(FILE *, FILE *); +void write_prep_partition(FILE *, FILE *); +void write_asm_data(FILE *, FILE *); unsigned int elfhdr_size = 65536; int main(int argc, char *argv[]) { - int in_fd, out_fd; - int argptr = 1; - unsigned int prep = 0; - unsigned int asmoutput = 0; - - if ( (argc < 3) || (argc > 4) ) - { - fprintf(stderr, "usage: %s [-pbp] [-asm] \n",argv[0]); - exit(-1); - } - - /* needs to handle args more elegantly -- but this is a small/simple program */ - - /* check for -pbp */ - if ( !strcmp( argv[argptr], "-pbp" ) ) - { - prep = 1; - argptr++; - } - - /* check for -asm */ - if ( !strcmp( argv[argptr], "-asm" ) ) - { - asmoutput = 1; - argptr++; - } - - /* input file */ - if ( !strcmp( argv[argptr], "-" ) ) - in_fd = 0; /* stdin */ - else - if ((in_fd = open( argv[argptr] , 0)) < 0) - exit(-1); - argptr++; - - /* output file */ - if ( !strcmp( argv[argptr], "-" ) ) - out_fd = 1; /* stdout */ - else - if ((out_fd = creat( argv[argptr] , 0755)) < 0) - exit(-1); - argptr++; - - /* skip elf header in input file */ - /*if ( !prep )*/ - lseek(in_fd, elfhdr_size, SEEK_SET); - - /* write prep partition if necessary */ - if ( prep ) - write_prep_partition( in_fd, out_fd ); - - /* write input image to bootimage */ - if ( asmoutput ) - write_asm_data( in_fd, out_fd ); - else - copy_image(in_fd, out_fd); - - return 0; + FILE *in, *out; + int argptr = 1; + int prep = 0; + int asmoutput = 0; + + if (argc < 3 || argc > 4) { + fprintf(stderr, "usage: %s [-pbp] [-asm] \n", + argv[0]); + exit(-1); + } + +/* needs to handle args more elegantly -- but this is a small/simple program */ + + /* check for -pbp */ + if (!strcmp(argv[argptr], "-pbp")) { + prep = 1; + argptr++; + } + + /* check for -asm */ + if (!strcmp(argv[argptr], "-asm")) { + asmoutput = 1; + argptr++; + } + + /* input file */ + if (!strcmp(argv[argptr], "-")) + in = stdin; + else if (!(in = fopen(argv[argptr], "r"))) + exit(-1); + argptr++; + + /* output file */ + if (!strcmp(argv[argptr], "-")) + out = stdout; + else if (!(out = fopen(argv[argptr], "w"))) + exit(-1); + argptr++; + + /* skip elf header in input file */ + /*if ( !prep )*/ + fseek(in, elfhdr_size, SEEK_SET); + + /* write prep partition if necessary */ + if (prep) + write_prep_partition(in, out); + + /* write input image to bootimage */ + if (asmoutput) + write_asm_data(in, out); + else + copy_image(in, out); + + return 0; } -void write_prep_partition(int in, int out) +void store_le32(unsigned int v, unsigned char *p) { - unsigned char block[512]; - partition_entry_t pe; - dword_t *entry = (dword_t *)&block[0]; - dword_t *length = (dword_t *)&block[sizeof(long)]; - struct stat info; - - if (fstat(in, &info) < 0) - { - fprintf(stderr,"info failed\n"); - exit(-1); - } - - bzero( block, sizeof block ); - - /* set entry point and boot image size skipping over elf header */ -#ifdef __i386__ - *entry = 0x400/*+65536*/; - *length = info.st_size-elfhdr_size+0x400; -#else - *entry = cpu_to_le32(0x400/*+65536*/); - *length = cpu_to_le32(info.st_size-elfhdr_size+0x400); -#endif /* __i386__ */ - - /* sets magic number for msdos partition (used by linux) */ - block[510] = 0x55; - block[511] = 0xAA; - - /* - * Build a "PReP" partition table entry in the boot record - * - "PReP" may only look at the system_indicator - */ - pe.boot_indicator = BootActive; - pe.system_indicator = SystemPrep; - /* - * The first block of the diskette is used by this "boot record" which - * actually contains the partition table. (The first block of the - * partition contains the boot image, but I digress...) We'll set up - * one partition on the diskette and it shall contain the rest of the - * diskette. - */ - pe.starting_head = 0; /* zero-based */ - pe.starting_sector = 2; /* one-based */ - pe.starting_cylinder = 0; /* zero-based */ - pe.ending_head = 1; /* assumes two heads */ - pe.ending_sector = 18; /* assumes 18 sectors/track */ - pe.ending_cylinder = 79; /* assumes 80 cylinders/diskette */ - - /* - * The "PReP" software ignores the above fields and just looks at - * the next two. - * - size of the diskette is (assumed to be) - * (2 tracks/cylinder)(18 sectors/tracks)(80 cylinders/diskette) - * - unlike the above sector numbers, the beginning sector is zero-based! - */ + p[0] = v; + p[1] = v >>= 8; + p[2] = v >>= 8; + p[3] = v >> 8; +} + +void write_prep_partition(FILE *in, FILE *out) +{ + unsigned char block[512]; + partition_entry_t pe; + unsigned char *entry = block; + unsigned char *length = block + 4; + long pos = ftell(in), size; + + if (fseek(in, 0, SEEK_END) < 0) { + fprintf(stderr,"info failed\n"); + exit(-1); + } + size = ftell(in); + if (fseek(in, pos, SEEK_SET) < 0) { + fprintf(stderr,"info failed\n"); + exit(-1); + } + + memset(block, '\0', sizeof(block)); + + /* set entry point and boot image size skipping over elf header */ + store_le32(0x400/*+65536*/, entry); + store_le32(size-elfhdr_size+0x400, length); + + /* sets magic number for msdos partition (used by linux) */ + block[510] = 0x55; + block[511] = 0xAA; + + /* + * Build a "PReP" partition table entry in the boot record + * - "PReP" may only look at the system_indicator + */ + pe.boot_indicator = BootActive; + pe.system_indicator = SystemPrep; + /* + * The first block of the diskette is used by this "boot record" which + * actually contains the partition table. (The first block of the + * partition contains the boot image, but I digress...) We'll set up + * one partition on the diskette and it shall contain the rest of the + * diskette. + */ + pe.starting_head = 0; /* zero-based */ + pe.starting_sector = 2; /* one-based */ + pe.starting_cylinder = 0; /* zero-based */ + pe.ending_head = 1; /* assumes two heads */ + pe.ending_sector = 18; /* assumes 18 sectors/track */ + pe.ending_cylinder = 79; /* assumes 80 cylinders/diskette */ + + /* + * The "PReP" software ignores the above fields and just looks at + * the next two. + * - size of the diskette is (assumed to be) + * (2 tracks/cylinder)(18 sectors/tracks)(80 cylinders/diskette) + * - unlike the above sector numbers, the beginning sector is zero-based! + */ #if 0 - pe.beginning_sector = cpu_to_le32(1); -#else - /* This has to be 0 on the PowerStack? */ -#ifdef __i386__ - pe.beginning_sector = 0; + store_le32(1, pe.beginning_sector); #else - pe.beginning_sector = cpu_to_le32(0); -#endif /* __i386__ */ + /* This has to be 0 on the PowerStack? */ + store_le32(0, pe.beginning_sector); #endif -#ifdef __i386__ - pe.number_of_sectors = 2*18*80-1; -#else - pe.number_of_sectors = cpu_to_le32(2*18*80-1); -#endif /* __i386__ */ + store_le32(2*18*80-1, pe.number_of_sectors); - memcpy(&block[0x1BE], &pe, sizeof(pe)); + memcpy(&block[0x1BE], &pe, sizeof(pe)); - write( out, block, sizeof(block) ); - write( out, entry, sizeof(*entry) ); - write( out, length, sizeof(*length) ); - /* set file position to 2nd sector where image will be written */ - lseek( out, 0x400, SEEK_SET ); + fwrite(block, sizeof(block), 1, out); + fwrite(entry, 4, 1, out); + fwrite(length, 4, 1, out); + /* set file position to 2nd sector where image will be written */ + fseek( out, 0x400, SEEK_SET ); } -void -copy_image(int in, int out) +void copy_image(FILE *in, FILE *out) { - char buf[SIZE]; - int n; + char buf[SIZE]; + int n; - while ( (n = read(in, buf, SIZE)) > 0 ) - write(out, buf, n); + while ( (n = fread(buf, 1, SIZE, in)) > 0 ) + fwrite(buf, 1, n, out); } void -write_asm_data( int in, int out ) +write_asm_data(FILE *in, FILE *out) { - int i, cnt, pos, len; - unsigned int cksum, val; - unsigned char *lp; - unsigned char buf[SIZE]; - unsigned char str[256]; - - write( out, "\t.data\n\t.globl input_data\ninput_data:\n", - strlen( "\t.data\n\t.globl input_data\ninput_data:\n" ) ); - pos = 0; - cksum = 0; - while ((len = read(in, buf, sizeof(buf))) > 0) - { - cnt = 0; - lp = (unsigned char *)buf; - len = (len + 3) & ~3; /* Round up to longwords */ - for (i = 0; i < len; i += 4) - { - if (cnt == 0) - { - write( out, "\t.long\t", strlen( "\t.long\t" ) ); - } - sprintf( str, "0x%02X%02X%02X%02X", lp[0], lp[1], lp[2], lp[3]); - write( out, str, strlen(str) ); - val = *(unsigned long *)lp; - cksum ^= val; - lp += 4; - if (++cnt == 4) - { - cnt = 0; - sprintf( str, " # %x \n", pos+i-12); - write( out, str, strlen(str) ); - } else - { - write( out, ",", 1 ); - } - } - if (cnt) - { - write( out, "0\n", 2 ); - } - pos += len; - } - sprintf(str, "\t.globl input_len\ninput_len:\t.long\t0x%x\n", pos); - write( out, str, strlen(str) ); - - fprintf(stderr, "cksum = %x\n", cksum); + int i, cnt, pos = 0; + unsigned int cksum = 0, val; + unsigned char *lp; + unsigned char buf[SIZE]; + size_t len; + + fputs("\t.data\n\t.globl input_data\ninput_data:\n", out); + while ((len = fread(buf, 1, sizeof(buf), in)) > 0) { + cnt = 0; + lp = buf; + /* Round up to longwords */ + while (len & 3) + buf[len++] = '\0'; + for (i = 0; i < len; i += 4) { + if (cnt == 0) + fputs("\t.long\t", out); + fprintf(out, "0x%02X%02X%02X%02X", + lp[0], lp[1], lp[2], lp[3]); + val = *(unsigned long *)lp; + cksum ^= val; + lp += 4; + if (++cnt == 4) { + cnt = 0; + fprintf(out, " # %x \n", pos+i-12); + } else { + fputs(",", out); + } + } + if (cnt) + fputs("0\n", out); + pos += len; + } + fprintf(out, "\t.globl input_len\ninput_len:\t.long\t0x%x\n", pos); + fprintf(stderr, "cksum = %x\n", cksum); } -- cgit v1.2.3 From 9e84b60ed87f5fe2dce10be2db1bfbb926a49e66 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 23 Sep 2006 01:39:45 +0100 Subject: [POWERPC] UPIO_TSI cleanup (le32_to_cpu(x) >> 8) & 0xff is a very odd way to spell (x >> 16) & 0xff, even if that code is hit only on ppc. The value is host-endian - we've got it from readl(), after all... Signed-off-by: Al Viro Signed-off-by: Paul Mackerras --- drivers/serial/8250.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 0ae9ced00ed..10c2daab99a 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -320,8 +320,8 @@ static unsigned int serial_in(struct uart_8250_port *up, int offset) case UPIO_TSI: if (offset == UART_IIR) { - tmp = readl((u32 *)(up->port.membase + UART_RX)); - return (cpu_to_le32(tmp) >> 8) & 0xff; + tmp = readl(up->port.membase + (UART_IIR & ~3)); + return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */ } else return readb(up->port.membase + offset); -- cgit v1.2.3 From 0eab40ffadbdc601e5374e8df87f1d2490cd839e Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Sun, 24 Sep 2006 10:38:10 +0200 Subject: [POWERPC] enable sysrq in pmac32_defconfig Enable sysrq also for pmac32 Signed-off-by: Olaf Hering Signed-off-by: Paul Mackerras --- arch/powerpc/configs/pmac32_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig index 6861dde7d77..dc8df4ef727 100644 --- a/arch/powerpc/configs/pmac32_defconfig +++ b/arch/powerpc/configs/pmac32_defconfig @@ -1826,7 +1826,7 @@ CONFIG_OPROFILE=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -# CONFIG_MAGIC_SYSRQ is not set +CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 -- cgit v1.2.3 From 2cec1b452c2cb6abf0589f35b69ce09c3e612bb4 Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Sun, 24 Sep 2006 20:53:29 +0200 Subject: [POWERPC] update powerpc defconfig files after libata kconfig breakage Update defconfig files after libata .config breakage sed -i 's/CONFIG_SCSI_SATA_/CONFIG_SATA_/;s/CONFIG_SCSI_SATA/CONFIG_ATA/' arch/powerpc/configs/*g Signed-off-by: Olaf Hering Signed-off-by: Paul Mackerras --- arch/powerpc/configs/chrp32_defconfig | 2 +- arch/powerpc/configs/g5_defconfig | 28 ++++++++++++++-------------- arch/powerpc/configs/iseries_defconfig | 2 +- arch/powerpc/configs/mpc7448_hpc2_defconfig | 28 ++++++++++++++-------------- arch/powerpc/configs/mpc834x_itx_defconfig | 28 ++++++++++++++-------------- arch/powerpc/configs/pmac32_defconfig | 2 +- arch/powerpc/configs/ppc64_defconfig | 28 ++++++++++++++-------------- arch/powerpc/configs/pseries_defconfig | 2 +- 8 files changed, 60 insertions(+), 60 deletions(-) diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig index bbf2b5f8a8c..fee72f8a2fb 100644 --- a/arch/powerpc/configs/chrp32_defconfig +++ b/arch/powerpc/configs/chrp32_defconfig @@ -492,7 +492,7 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set +# CONFIG_ATA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index 4b9c2ed925f..92d0a9dd0b8 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -490,23 +490,23 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -CONFIG_SCSI_SATA=y -# CONFIG_SCSI_SATA_AHCI is not set -CONFIG_SCSI_SATA_SVW=y +CONFIG_ATA=y +# CONFIG_SATA_AHCI is not set +CONFIG_SATA_SVW=y # CONFIG_SCSI_ATA_PIIX is not set -# CONFIG_SCSI_SATA_MV is not set -# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set # CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_SATA_QSTOR is not set -# CONFIG_SCSI_SATA_PROMISE is not set -# CONFIG_SCSI_SATA_SX4 is not set -# CONFIG_SCSI_SATA_SIL is not set -# CONFIG_SCSI_SATA_SIL24 is not set -# CONFIG_SCSI_SATA_SIS is not set -# CONFIG_SCSI_SATA_ULI is not set -# CONFIG_SCSI_SATA_VIA is not set -# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig index eb0885ea073..d58f82f836f 100644 --- a/arch/powerpc/configs/iseries_defconfig +++ b/arch/powerpc/configs/iseries_defconfig @@ -475,7 +475,7 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set +# CONFIG_ATA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig index 719fba4eb42..d1811e75451 100644 --- a/arch/powerpc/configs/mpc7448_hpc2_defconfig +++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig @@ -413,23 +413,23 @@ CONFIG_BLK_DEV_SD=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -CONFIG_SCSI_SATA=y -# CONFIG_SCSI_SATA_AHCI is not set -# CONFIG_SCSI_SATA_SVW is not set +CONFIG_ATA=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set -CONFIG_SCSI_SATA_MV=y -# CONFIG_SCSI_SATA_NV is not set +CONFIG_SATA_MV=y +# CONFIG_SATA_NV is not set # CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_SATA_QSTOR is not set -# CONFIG_SCSI_SATA_PROMISE is not set -# CONFIG_SCSI_SATA_SX4 is not set -# CONFIG_SCSI_SATA_SIL is not set -# CONFIG_SCSI_SATA_SIL24 is not set -# CONFIG_SCSI_SATA_SIS is not set -# CONFIG_SCSI_SATA_ULI is not set -# CONFIG_SCSI_SATA_VIA is not set -# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set diff --git a/arch/powerpc/configs/mpc834x_itx_defconfig b/arch/powerpc/configs/mpc834x_itx_defconfig index ea55bab759c..cd3535e1a09 100644 --- a/arch/powerpc/configs/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/mpc834x_itx_defconfig @@ -465,23 +465,23 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -CONFIG_SCSI_SATA=y -# CONFIG_SCSI_SATA_AHCI is not set -# CONFIG_SCSI_SATA_SVW is not set +CONFIG_ATA=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set -# CONFIG_SCSI_SATA_MV is not set -# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set # CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_SATA_QSTOR is not set -# CONFIG_SCSI_SATA_PROMISE is not set -# CONFIG_SCSI_SATA_SX4 is not set -CONFIG_SCSI_SATA_SIL=y -# CONFIG_SCSI_SATA_SIL24 is not set -# CONFIG_SCSI_SATA_SIS is not set -# CONFIG_SCSI_SATA_ULI is not set -# CONFIG_SCSI_SATA_VIA is not set -# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +CONFIG_SATA_SIL=y +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig index dc8df4ef727..765c8bb90dd 100644 --- a/arch/powerpc/configs/pmac32_defconfig +++ b/arch/powerpc/configs/pmac32_defconfig @@ -682,7 +682,7 @@ CONFIG_SCSI_AIC7XXX_OLD=m # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set +# CONFIG_ATA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 7517d0c5303..be11df7c11a 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -520,23 +520,23 @@ CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -CONFIG_SCSI_SATA=y -# CONFIG_SCSI_SATA_AHCI is not set -CONFIG_SCSI_SATA_SVW=y +CONFIG_ATA=y +# CONFIG_SATA_AHCI is not set +CONFIG_SATA_SVW=y # CONFIG_SCSI_ATA_PIIX is not set -# CONFIG_SCSI_SATA_MV is not set -# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set # CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_SATA_QSTOR is not set -# CONFIG_SCSI_SATA_PROMISE is not set -# CONFIG_SCSI_SATA_SX4 is not set -# CONFIG_SCSI_SATA_SIL is not set -# CONFIG_SCSI_SATA_SIL24 is not set -# CONFIG_SCSI_SATA_SIS is not set -# CONFIG_SCSI_SATA_ULI is not set -# CONFIG_SCSI_SATA_VIA is not set -# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index a8cdf312e1b..44175fb7ade 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -506,7 +506,7 @@ CONFIG_SCSI_SAS_ATTRS=m # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set +# CONFIG_ATA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set -- cgit v1.2.3 From 022d51b1b28d25d50935c39d7968fefe34102a9f Mon Sep 17 00:00:00 2001 From: Linas Vepstas Date: Mon, 25 Sep 2006 18:01:42 -0500 Subject: [POWERPC] EEH failure to mark pci slot as frozen. Bug fix: when marking a slot as frozen, we forgot to mark pci device itself as frozen. (we did manage to mark the pci children, but forget the parent itself.) This is needed so that some device drivers can check the pci status in critical sections (e.g. in spin loops with interrupts disabled). Signed-off-by: Linas Vepstas Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/eeh.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 84bc8f7e17e..3c2d63ebf78 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -225,6 +225,7 @@ static void __eeh_mark_slot (struct device_node *dn, int mode_flag) void eeh_mark_slot (struct device_node *dn, int mode_flag) { + struct pci_dev *dev; dn = find_device_pe (dn); /* Back up one, since config addrs might be shared */ @@ -232,6 +233,12 @@ void eeh_mark_slot (struct device_node *dn, int mode_flag) dn = dn->parent; PCI_DN(dn)->eeh_mode |= mode_flag; + + /* Mark the pci device too */ + dev = PCI_DN(dn)->pcidev; + if (dev) + dev->error_state = pci_channel_io_frozen; + __eeh_mark_slot (dn->child, mode_flag); } -- cgit v1.2.3 From d86d9b8cab45adf64e2ea8fe975bec3282b5de81 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Tue, 26 Sep 2006 11:54:16 +1000 Subject: [POWERPC] fix spin lock nesting in hvc_iseries We had nested spinlocks using the same flags variable, but it turns out that we don't need the nested locks at all (the lock protects a static buffer that we aren't using here), so just remove the extra locks. Spotted by Alexey Dobriyan. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- drivers/char/hvc_iseries.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/char/hvc_iseries.c b/drivers/char/hvc_iseries.c index 4747729459c..8b6f197e5f8 100644 --- a/drivers/char/hvc_iseries.c +++ b/drivers/char/hvc_iseries.c @@ -153,9 +153,7 @@ static int put_chars(uint32_t vtermno, const char *buf, int count) spin_lock_irqsave(&consolelock, flags); if (viochar_is_console(pi) && !viopath_isactive(pi->lp)) { - spin_lock_irqsave(&consoleloglock, flags); HvCall_writeLogBuffer(buf, count); - spin_unlock_irqrestore(&consoleloglock, flags); sent = count; goto done; } @@ -171,11 +169,8 @@ static int put_chars(uint32_t vtermno, const char *buf, int count) len = (count > VIOCHAR_MAX_DATA) ? VIOCHAR_MAX_DATA : count; - if (viochar_is_console(pi)) { - spin_lock_irqsave(&consoleloglock, flags); + if (viochar_is_console(pi)) HvCall_writeLogBuffer(buf, len); - spin_unlock_irqrestore(&consoleloglock, flags); - } init_data_event(viochar, pi->lp); -- cgit v1.2.3 From 2bf118197cb4d9a5e7a9e45b5b007235fdc9f402 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 27 Sep 2006 22:47:03 +1000 Subject: [POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras --- arch/powerpc/Makefile | 6 +- arch/powerpc/boot/Makefile | 224 +++++++++++++++--------------------- arch/powerpc/boot/wrapper | 204 ++++++++++++++++++++++++++++++++ arch/powerpc/boot/zImage.coff.lds | 46 -------- arch/powerpc/boot/zImage.coff.lds.S | 46 ++++++++ arch/powerpc/boot/zImage.lds | 46 -------- arch/powerpc/boot/zImage.lds.S | 46 ++++++++ 7 files changed, 391 insertions(+), 227 deletions(-) create mode 100755 arch/powerpc/boot/wrapper delete mode 100644 arch/powerpc/boot/zImage.coff.lds create mode 100644 arch/powerpc/boot/zImage.coff.lds.S delete mode 100644 arch/powerpc/boot/zImage.lds create mode 100644 arch/powerpc/boot/zImage.lds.S diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 01667d1d571..a00fe723655 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -20,6 +20,7 @@ CROSS32_COMPILE ?= CROSS32CC := $(CROSS32_COMPILE)gcc CROSS32AS := $(CROSS32_COMPILE)as CROSS32LD := $(CROSS32_COMPILE)ld +CROSS32AR := $(CROSS32_COMPILE)ar CROSS32OBJCOPY := $(CROSS32_COMPILE)objcopy ifeq ($(HAS_BIARCH),y) @@ -28,10 +29,11 @@ CROSS32CC := $(CC) -m32 CROSS32AS := $(AS) -a32 CROSS32LD := $(LD) -m elf32ppc CROSS32OBJCOPY := $(OBJCOPY) +CROSS32AR := $(AR) endif endif -export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY +export CROSS32CC CROSS32AS CROSS32LD CROSS32AR CROSS32OBJCOPY KBUILD_DEFCONFIG := $(shell uname -m)_defconfig @@ -146,7 +148,7 @@ all: $(KBUILD_IMAGE) CPPFLAGS_vmlinux.lds := -Upowerpc -BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm uImage vmlinux.bin +BOOT_TARGETS = zImage zImage.initrd uImage PHONY += $(BOOT_TARGETS) diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index e73774136b5..c383d56bbe1 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -20,33 +20,34 @@ # CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE # in the toplevel makefile. +all: $(obj)/zImage HOSTCC := gcc BOOTCFLAGS := $(HOSTCFLAGS) -fno-builtin -nostdinc -isystem \ $(shell $(CROSS32CC) -print-file-name=include) -fPIC BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc -OBJCOPYFLAGS := contents,alloc,load,readonly,data -OBJCOPY_COFF_ARGS := -O aixcoff-rs6000 --set-start 0x500000 -OBJCOPY_MIB_ARGS := -O aixcoff-rs6000 -R .stab -R .stabstr -R .comment + +ifeq ($(call cc-option-yn, -fstack-protector),y) +BOOTCFLAGS += -fno-stack-protector +endif + +BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) zlib := inffast.c inflate.c inftrees.c zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h zliblinuxheader := zlib.h zconf.h zutil.h -$(addprefix $(obj)/,$(zlib) main.o): $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader)) -#$(addprefix $(obj)/,main.o): $(addprefix $(obj)/,zlib.h) +$(addprefix $(obj)/,$(zlib) main.o): $(addprefix $(obj)/,$(zliblinuxheader)) \ + $(addprefix $(obj)/,$(zlibheader)) + +src-wlib := string.S stdio.c main.c div64.S $(zlib) +src-plat := of.c +src-boot := crt0.S $(src-wlib) $(src-plat) empty.c -src-boot-$(CONFIG_PPC_MULTIPLATFORM) := of.c -src-boot := crt0.S string.S stdio.c main.c div64.S $(src-boot-y) -src-boot += $(zlib) src-boot := $(addprefix $(obj)/, $(src-boot)) obj-boot := $(addsuffix .o, $(basename $(src-boot))) - -ifeq ($(call cc-option-yn, -fstack-protector),y) -BOOTCFLAGS += -fno-stack-protector -endif - -BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) +obj-wlib := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-wlib)))) +obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat)))) quiet_cmd_copy_zlib = COPY $@ cmd_copy_zlib = sed "s@__attribute_used__@@;s@]\+\).*@\"\1\"@" $< > $@ @@ -66,8 +67,14 @@ $(addprefix $(obj)/,$(zlibheader)): $(obj)/%: $(srctree)/lib/zlib_inflate/% $(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/% $(call cmd,copy_zliblinuxheader) -clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) +$(obj)/empty.c: + @touch $@ + +$(obj)/zImage.lds $(obj)/zImage.coff.lds: $(obj)/%: $(srctree)/$(src)/%.S + @cp $< $@ +clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \ + $(obj)/empty.c quiet_cmd_bootcc = BOOTCC $@ cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $< @@ -75,146 +82,97 @@ quiet_cmd_bootcc = BOOTCC $@ quiet_cmd_bootas = BOOTAS $@ cmd_bootas = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $< -quiet_cmd_bootld = BOOTLD $@ - cmd_bootld = $(CROSS32LD) -T $(srctree)/$(src)/$(3) -o $@ $(2) +quiet_cmd_bootar = BOOTAR $@ + cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $^; mv $@.$$$$ $@ $(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c $(call if_changed_dep,bootcc) $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S $(call if_changed_dep,bootas) -#----------------------------------------------------------- -# ELF sections within the zImage bootloader/wrapper -#----------------------------------------------------------- -required := vmlinux.strip -initrd := initrd +$(obj)/wrapper.a: $(obj-wlib) + $(call cmd,bootar) -obj-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.o, $(section))) -src-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.c, $(section))) -gz-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.gz, $(section))) +hostprogs-y := addnote addRamDisk hack-coff -hostprogs-y := addnote addRamDisk hack-coff +extra-y := $(obj)/crt0.o $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ + $(obj)/zImage.lds $(obj)/zImage.coff.lds -targets += zImage.vmode zImage.initrd.vmode zImage zImage.initrd \ - zImage.coff zImage.initrd.coff miboot.image miboot.initrd.image \ - $(patsubst $(obj)/%,%, $(call obj-sec, $(required) $(initrd))) \ - $(patsubst $(obj)/%,%, $(call src-sec, $(required) $(initrd))) \ - $(patsubst $(obj)/%,%, $(call gz-sec, $(required) $(initrd))) \ - vmlinux.initrd dummy.o -extra-y := initrd.o +wrapper :=$(srctree)/$(src)/wrapper +wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff) -quiet_cmd_ramdisk = RAMDISK $@ - cmd_ramdisk = $(obj)/addRamDisk $(obj)/ramdisk.image.gz $< $@ +############# +# Bits for building various flavours of zImage -quiet_cmd_stripvm = STRIP $@ - cmd_stripvm = $(STRIP) -s -R .comment $< -o $@ +ifneq ($(CROSS32_COMPILE),) +CROSSWRAP := -C $(CROSS32_COMPILE) +else +ifneq ($(CROSS_COMPILE),) +CROSSWRAP := -C $(CROSS_COMPILE) +endif +endif -vmlinux.strip: vmlinux - $(call if_changed,stripvm) -$(obj)/vmlinux.initrd: vmlinux.strip $(obj)/addRamDisk $(obj)/ramdisk.image.gz - $(call if_changed,ramdisk) +quiet_cmd_wrap = WRAP $@ + cmd_wrap =$(wrapper) -c -o $@ -p $2 $(CROSSWRAP) vmlinux +quiet_cmd_wrap_initrd = WRAP $@ + cmd_wrap_initrd =$(wrapper) -c -o $@ -p $2 $(CROSSWRAP) \ + -i $(obj)/ramdisk.image.gz vmlinux -quiet_cmd_addsection = ADDSEC $@ - cmd_addsection = $(CROSS32OBJCOPY) $@ \ - --add-section=.kernel:$(strip $(patsubst $(obj)/kernel-%.o,%, $@))=$(patsubst %.o,%.gz, $@) \ - --set-section-flags=.kernel:$(strip $(patsubst $(obj)/kernel-%.o,%, $@))=$(OBJCOPYFLAGS) +$(obj)/zImage.chrp: vmlinux $(wrapperbits) + $(call cmd,wrap,chrp) -quiet_cmd_addnote = ADDNOTE $@ - cmd_addnote = $(obj)/addnote $@ +$(obj)/zImage.initrd.chrp: vmlinux $(wrapperbits) + $(call cmd,wrap_initrd,chrp) -quiet_cmd_gen-miboot = GEN $@ - cmd_gen-miboot = $(OBJCOPY) $(OBJCOPY_MIB_ARGS) \ - --add-section=$1=$(word 2, $^) $< $@ +$(obj)/zImage.pseries: vmlinux $(wrapperbits) + $(call cmd,wrap,pseries) -quiet_cmd_gencoff = COFF $@ - cmd_gencoff = $(OBJCOPY) $(OBJCOPY_COFF_ARGS) $@ && \ - $(obj)/hack-coff $@ +$(obj)/zImage.initrd.pseries: vmlinux $(wrapperbits) + $(call cmd,wrap_initrd,pseries) -$(call gz-sec, $(required)): $(obj)/kernel-%.gz: % - $(call if_changed,gzip) +$(obj)/zImage.pmac: vmlinux $(wrapperbits) + $(call cmd,wrap,pmac) -$(obj)/kernel-initrd.gz: $(obj)/ramdisk.image.gz - cp -f $(obj)/ramdisk.image.gz $@ +$(obj)/zImage.initrd.pmac: vmlinux $(wrapperbits) + $(call cmd,wrap_initrd,pmac) -$(call src-sec, $(required) $(initrd)): $(obj)/kernel-%.c: $(obj)/kernel-%.gz - @touch $@ +$(obj)/zImage.coff: vmlinux $(wrapperbits) + $(call cmd,wrap,pmaccoff) -$(call obj-sec, $(required) $(initrd)): $(obj)/kernel-%.o: $(obj)/kernel-%.c - $(call if_changed_dep,bootcc) - $(call cmd,addsection) +$(obj)/zImage.initrd.coff: vmlinux $(wrapperbits) + $(call cmd,wrap_initrd,pmaccoff) + +$(obj)/zImage.miboot: vmlinux $(wrapperbits) + $(call cmd,wrap,miboot) -$(obj)/zImage.vmode $(obj)/zImage.coff: obj-boot += $(call obj-sec, $(required)) -$(obj)/zImage.vmode: $(call obj-sec, $(required)) $(obj-boot) $(srctree)/$(src)/zImage.lds - $(call cmd,bootld,$(obj-boot),zImage.lds) +$(obj)/zImage.initrd.miboot: vmlinux $(wrapperbits) + $(call cmd,wrap_initrd,miboot) -$(obj)/zImage.initrd.vmode $(obj)/zImage.initrd.coff: obj-boot += $(call obj-sec, $(required) $(initrd)) -$(obj)/zImage.initrd.vmode: $(call obj-sec, $(required) $(initrd)) $(obj-boot) $(srctree)/$(src)/zImage.lds - $(call cmd,bootld,$(obj-boot),zImage.lds) +$(obj)/uImage: vmlinux $(wrapperbits) + $(call cmd,wrap,uboot) + +image-$(CONFIG_PPC_PSERIES) += zImage.pseries +image-$(CONFIG_PPC_MAPLE) += zImage.pseries +image-$(CONFIG_PPC_CELL) += zImage.pseries +image-$(CONFIG_PPC_CHRP) += zImage.chrp +image-$(CONFIG_PPC_PMAC) += zImage.pmac +image-$(CONFIG_DEFAULT_UIMAGE) += uImage # For 32-bit powermacs, build the COFF and miboot images # as well as the ELF images. -coffimage-$(CONFIG_PPC_PMAC)-$(CONFIG_PPC32) := $(obj)/zImage.coff -coffrdimg-$(CONFIG_PPC_PMAC)-$(CONFIG_PPC32) := $(obj)/zImage.initrd.coff -mibootimg-$(CONFIG_PPC_PMAC)-$(CONFIG_PPC32) := $(obj)/miboot.image -mibrdimg-$(CONFIG_PPC_PMAC)-$(CONFIG_PPC32) := $(obj)/miboot.initrd.image - -$(obj)/zImage: $(obj)/zImage.vmode $(obj)/addnote $(coffimage-y-y) \ - $(mibootimg-y-y) - @cp -f $< $@ - $(call if_changed,addnote) - -$(obj)/zImage.initrd: $(obj)/zImage.initrd.vmode $(obj)/addnote \ - $(coffrdimg-y-y) $(mibrdimg-y-y) - @cp -f $< $@ - $(call if_changed,addnote) - -$(obj)/zImage.coff: $(call obj-sec, $(required)) $(obj-boot) \ - $(srctree)/$(src)/zImage.coff.lds $(obj)/hack-coff - $(call cmd,bootld,$(obj-boot),zImage.coff.lds) - $(call cmd,gencoff) - -$(obj)/zImage.initrd.coff: $(call obj-sec, $(required) $(initrd)) $(obj-boot) \ - $(srctree)/$(src)/zImage.coff.lds $(obj)/hack-coff - $(call cmd,bootld,$(obj-boot),zImage.coff.lds) - $(call cmd,gencoff) - -$(obj)/miboot.image: $(obj)/dummy.o $(obj)/vmlinux.gz - $(call cmd,gen-miboot,image) - -$(obj)/miboot.initrd.image: $(obj)/miboot.image $(images)/ramdisk.image.gz - $(call cmd,gen-miboot,initrd) - -#----------------------------------------------------------- -# build u-boot images -#----------------------------------------------------------- -quiet_cmd_mygzip = GZIP $@ -cmd_mygzip = gzip -f -9 < $< > $@.$$$$ && mv $@.$$$$ $@ - -quiet_cmd_objbin = OBJCOPY $@ - cmd_objbin = $(OBJCOPY) -O binary $< $@ - -quiet_cmd_uimage = UIMAGE $@ - cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A ppc -O linux -T kernel \ - -C gzip -a 00000000 -e 00000000 -n 'Linux-$(KERNELRELEASE)' \ - -d $< $@ - -MKIMAGE := $(srctree)/scripts/mkuboot.sh -targets += uImage -extra-y += vmlinux.bin vmlinux.gz - -$(obj)/vmlinux.bin: vmlinux FORCE - $(call if_changed,objbin) - -$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE - $(call if_changed,mygzip) - -$(obj)/uImage: $(obj)/vmlinux.gz - $(Q)rm -f $@ - $(call cmd,uimage) - @echo -n ' Image: $@ ' - @if [ -f $@ ]; then echo 'is ready' ; else echo 'not made'; fi - -install: $(CONFIGURE) $(BOOTIMAGE) - sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" "$(BOOTIMAGE)" - -clean-files += $(addprefix $(objtree)/, $(obj-boot) vmlinux.strip) +ifeq ($(CONFIG_PPC32),y) +image-$(CONFIG_PPC_PMAC) += zImage.coff zImage.miboot +endif + +initrd-y := $(patsubst zImage%, zImage.initrd%, $(image-y)) + +$(obj)/zImage: $(addprefix $(obj)/, $(image-y)) + @rm -f $@; ln $< $@ +$(obj)/zImage.initrd: $(addprefix $(obj)/, $(initrd-y)) + @rm -f $@; ln $< $@ + +install: $(CONFIGURE) $(image-y) + sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $< + +clean-files += $(addprefix $(objtree)/, $(obj-boot) vmlinux.strip.gz) +clean-files += $(addprefix $(objtree)/, $(obj-boot) vmlinux.bin.gz) diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper new file mode 100755 index 00000000000..eab7318729e --- /dev/null +++ b/arch/powerpc/boot/wrapper @@ -0,0 +1,204 @@ +#!/bin/sh + +# Copyright (C) 2006 Paul Mackerras, IBM Corporation +# This program may be used under the terms of version 2 of the GNU +# General Public License. + +# This script takes a kernel binary and optionally an initrd image +# and/or a device-tree blob, and creates a bootable zImage for a +# given platform. + +# Options: +# -o zImage specify output file +# -p platform specify platform (links in $platform.o) +# -i initrd specify initrd file +# -d devtree specify device-tree blob +# -s tree.dts specify device-tree source file (needs dtc installed) +# -c cache $kernel.strip.gz (use if present & newer, else make) +# -C prefix specify command prefix for cross-building tools +# (strip, objcopy, ld) +# -D dir specify directory containing data files used by script +# (default ./arch/powerpc/boot) +# -W dir specify working directory for temporary files (default .) + +# defaults +kernel= +ofile=zImage +platform=of +initrd= +dtb= +dts= +cacheit= + +# cross-compilation prefix +CROSS= + +# directory for object and other files used by this script +object=arch/powerpc/boot + +# directory for working files +tmpdir=. + +usage() { + echo 'Usage: wrapper [-o output] [-p platform] [-i initrd]' >&2 + echo ' [-d devtree] [-s tree.dts] [-c] [-C cross-prefix]' >&2 + echo ' [-D datadir] [-W workingdir] [vmlinux]' >&2 + exit 1 +} + +while [ "$#" -gt 0 ]; do + case "$1" in + -o) + shift + [ "$#" -gt 0 ] || usage + ofile="$1" + ;; + -p) + shift + [ "$#" -gt 0 ] || usage + platform="$1" + ;; + -i) + shift + [ "$#" -gt 0 ] || usage + initrd="$1" + ;; + -d) + shift + [ "$#" -gt 0 ] || usage + dtb="$1" + ;; + -s) + shift + [ "$#" -gt 0 ] || usage + dts="$1" + ;; + -c) + cacheit=y + ;; + -C) + shift + [ "$#" -gt 0 ] || usage + CROSS="$1" + ;; + -D) + shift + [ "$#" -gt 0 ] || usage + object="$1" + ;; + -W) + shift + [ "$#" -gt 0 ] || usage + tmpdir="$1" + ;; + -?) + usage + ;; + *) + [ -z "$kernel" ] || usage + kernel="$1" + ;; + esac + shift +done + +if [ -n "$dts" ]; then + if [ -z "$dtb" ]; then + dtb="$platform.dtb" + fi + dtc -O dtb -o "$dtb" -b 0 -V 16 "$dts" || exit 1 +fi + +if [ -z "$kernel" ]; then + kernel=vmlinux +fi + +platformo=$object/"$platform".o +lds=$object/zImage.lds +ext=strip +objflags=-S +tmp=$tmpdir/zImage.$$.o +ksection=.kernel:vmlinux.strip +isection=.kernel:initrd + +case "$platform" in +pmac|pseries|chrp) + platformo=$object/of.o + ;; +pmaccoff) + platformo=$object/of.o + lds=$object/zImage.coff.lds + ;; +miboot|uboot) + # miboot and U-boot want just the bare bits, not an ELF binary + ext=bin + objflags="-O binary" + tmp="$ofile" + ksection=image + isection=initrd + ;; +esac + +vmz="$tmpdir/`basename \"$kernel\"`.$ext" +if [ -z "$cacheit" -o ! -f "$vmz.gz" -o "$vmz.gz" -ot "$kernel" ]; then + ${CROSS}objcopy $objflags "$kernel" "$vmz.$$" + gzip -f -9 "$vmz.$$" + if [ -n "$cacheit" ]; then + mv -f "$vmz.$$.gz" "$vmz.gz" + else + vmz="$vmz.$$" + fi +fi + +case "$platform" in +uboot) + rm -f "$ofile" + version=`${CROSS}strings "$kernel" | grep '^Linux version [-0-9.]' | \ + cut -d' ' -f3` + if [ -n "$version" ]; then + version="-n Linux-$version" + fi + mkimage -A ppc -O linux -T kernel -C gzip -a 00000000 -e 00000000 \ + $version -d "$vmz.gz" "$ofile" + if [ -z "$cacheit" ]; then + rm -f $vmz.gz + fi + exit 0 + ;; +esac + +addsec() { + ${CROSS}objcopy $4 $1 \ + --add-section=$3="$2" \ + --set-section-flags=$3=contents,alloc,load,readonly,data +} + +addsec $tmp "$vmz.gz" $ksection $object/empty.o +if [ -z "$cacheit" ]; then + rm -f "$vmz.gz" +fi + +if [ -n "$initrd" ]; then + addsec $tmp "$initrd" initrd +fi + +if [ -n "$dtb" ]; then + addsec $tmp "$dtb" dtb +fi + +if [ "$platform" != "miboot" ]; then + ${CROSS}ld -m elf32ppc -T $lds -o "$ofile" \ + $object/crt0.o $platformo $tmp $object/wrapper.a + rm $tmp +fi + +# post-processing needed for some platforms +case "$platform" in +pseries|chrp) + $object/addnote "$ofile" + ;; +pmaccoff) + ${CROSS}objcopy -O aixcoff-rs6000 --set-start 0x500000 "$ofile" + $object/hack-coff "$ofile" + ;; +esac diff --git a/arch/powerpc/boot/zImage.coff.lds b/arch/powerpc/boot/zImage.coff.lds deleted file mode 100644 index 6016251a1a2..00000000000 --- a/arch/powerpc/boot/zImage.coff.lds +++ /dev/null @@ -1,46 +0,0 @@ -OUTPUT_ARCH(powerpc:common) -ENTRY(_start) -SECTIONS -{ - . = (5*1024*1024); - _start = .; - .text : - { - *(.text) - *(.fixup) - } - _etext = .; - . = ALIGN(4096); - .data : - { - *(.rodata*) - *(.data*) - *(.sdata*) - __got2_start = .; - *(.got2) - __got2_end = .; - - _vmlinux_start = .; - *(.kernel:vmlinux.strip) - _vmlinux_end = .; - - _initrd_start = .; - *(.kernel:initrd) - _initrd_end = .; - } - - . = ALIGN(4096); - _edata = .; - __bss_start = .; - .bss : - { - *(.sbss) - *(.bss) - } - _end = . ; - - /DISCARD/ : - { - *(.comment) - } -} diff --git a/arch/powerpc/boot/zImage.coff.lds.S b/arch/powerpc/boot/zImage.coff.lds.S new file mode 100644 index 00000000000..6016251a1a2 --- /dev/null +++ b/arch/powerpc/boot/zImage.coff.lds.S @@ -0,0 +1,46 @@ +OUTPUT_ARCH(powerpc:common) +ENTRY(_start) +SECTIONS +{ + . = (5*1024*1024); + _start = .; + .text : + { + *(.text) + *(.fixup) + } + _etext = .; + . = ALIGN(4096); + .data : + { + *(.rodata*) + *(.data*) + *(.sdata*) + __got2_start = .; + *(.got2) + __got2_end = .; + + _vmlinux_start = .; + *(.kernel:vmlinux.strip) + _vmlinux_end = .; + + _initrd_start = .; + *(.kernel:initrd) + _initrd_end = .; + } + + . = ALIGN(4096); + _edata = .; + __bss_start = .; + .bss : + { + *(.sbss) + *(.bss) + } + _end = . ; + + /DISCARD/ : + { + *(.comment) + } +} diff --git a/arch/powerpc/boot/zImage.lds b/arch/powerpc/boot/zImage.lds deleted file mode 100644 index 4b6bb3ffe3d..00000000000 --- a/arch/powerpc/boot/zImage.lds +++ /dev/null @@ -1,46 +0,0 @@ -OUTPUT_ARCH(powerpc:common) -ENTRY(_zimage_start) -SECTIONS -{ - . = (4*1024*1024); - _start = .; - .text : - { - *(.text) - *(.fixup) - } - _etext = .; - . = ALIGN(4096); - .data : - { - *(.rodata*) - *(.data*) - *(.sdata*) - __got2_start = .; - *(.got2) - __got2_end = .; - } - - . = ALIGN(4096); - _vmlinux_start = .; - .kernel:vmlinux.strip : { *(.kernel:vmlinux.strip) } - _vmlinux_end = .; - - . = ALIGN(4096); - _initrd_start = .; - .kernel:initrd : { *(.kernel:initrd) } - _initrd_end = .; - - . = ALIGN(4096); - _edata = .; - - . = ALIGN(4096); - __bss_start = .; - .bss : - { - *(.sbss) - *(.bss) - } - . = ALIGN(4096); - _end = . ; -} diff --git a/arch/powerpc/boot/zImage.lds.S b/arch/powerpc/boot/zImage.lds.S new file mode 100644 index 00000000000..4b6bb3ffe3d --- /dev/null +++ b/arch/powerpc/boot/zImage.lds.S @@ -0,0 +1,46 @@ +OUTPUT_ARCH(powerpc:common) +ENTRY(_zimage_start) +SECTIONS +{ + . = (4*1024*1024); + _start = .; + .text : + { + *(.text) + *(.fixup) + } + _etext = .; + . = ALIGN(4096); + .data : + { + *(.rodata*) + *(.data*) + *(.sdata*) + __got2_start = .; + *(.got2) + __got2_end = .; + } + + . = ALIGN(4096); + _vmlinux_start = .; + .kernel:vmlinux.strip : { *(.kernel:vmlinux.strip) } + _vmlinux_end = .; + + . = ALIGN(4096); + _initrd_start = .; + .kernel:initrd : { *(.kernel:initrd) } + _initrd_end = .; + + . = ALIGN(4096); + _edata = .; + + . = ALIGN(4096); + __bss_start = .; + .bss : + { + *(.sbss) + *(.bss) + } + . = ALIGN(4096); + _end = . ; +} -- cgit v1.2.3 From 7a69af63e788a324d162201a0b23df41bcf158dd Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Tue, 26 Sep 2006 17:46:37 -0500 Subject: [POWERPC] Add powerpc get/set_rtc_time interface to new generic rtc class Add powerpc get/set_rtc_time interface to new generic rtc class. This abstracts rtc chip specific code from the platform code for rtc-over-i2c platforms. Specific RTC chip support is now configured under Device Drivers -> Real Time Clock. Setting time of day from the RTC on startup is also configurable. this time without the potentially platform breaking initcall. Signed-off-by: Kim Phillips Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/time.c | 42 ++++++++++++++++++++++++++++++++++++++++++ include/asm-powerpc/time.h | 6 +++++- 2 files changed, 47 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 7a3c3f791ad..b4ed362c457 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -1048,6 +1048,48 @@ void __init time_init(void) set_dec(tb_ticks_per_jiffy); } +#ifdef CONFIG_RTC_CLASS +static int set_rtc_class_time(struct rtc_time *tm) +{ + int err; + struct class_device *class_dev = + rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE); + + if (class_dev == NULL) + return -ENODEV; + + err = rtc_set_time(class_dev, tm); + + rtc_class_close(class_dev); + + return 0; +} + +static void get_rtc_class_time(struct rtc_time *tm) +{ + int err; + struct class_device *class_dev = + rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE); + + if (class_dev == NULL) + return; + + err = rtc_read_time(class_dev, tm); + + rtc_class_close(class_dev); + + return; +} + +int __init rtc_class_hookup(void) +{ + ppc_md.get_rtc_time = get_rtc_class_time; + ppc_md.set_rtc_time = set_rtc_class_time; + + return 0; +} +#endif /* CONFIG_RTC_CLASS */ + #define FEBRUARY 2 #define STARTOFTIME 1970 diff --git a/include/asm-powerpc/time.h b/include/asm-powerpc/time.h index 5785ac4737b..b051d4c88c3 100644 --- a/include/asm-powerpc/time.h +++ b/include/asm-powerpc/time.h @@ -39,6 +39,10 @@ extern void generic_calibrate_decr(void); extern void wakeup_decrementer(void); extern void snapshot_timebase(void); +#ifdef CONFIG_RTC_CLASS +extern int __init rtc_class_hookup(void); +#endif + /* Some sane defaults: 125 MHz timebase, 1GHz processor */ extern unsigned long ppc_proc_freq; #define DEFAULT_PROC_FREQ (DEFAULT_TB_FREQ * 8) @@ -234,4 +238,4 @@ extern void snapshot_timebases(void); #endif #endif /* __KERNEL__ */ -#endif /* __PPC64_TIME_H */ +#endif /* __POWERPC_TIME_H */ -- cgit v1.2.3 From a8ed4f7ec3aa472134d7de6176f823b2667e450b Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Tue, 26 Sep 2006 17:46:51 -0500 Subject: [POWERPC] Enable generic rtc hook for the MPC8349 mITX Signed-off-by: Kim Phillips Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/83xx/mpc834x_itx.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c index 969fbb6d8c4..8c676d763bb 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.c +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -109,6 +109,10 @@ static int __init mpc834x_itx_probe(void) return 1; } +#ifdef CONFIG_RTC_CLASS +late_initcall(rtc_class_hookup); +#endif + define_machine(mpc834x_itx) { .name = "MPC834x ITX", .probe = mpc834x_itx_probe, -- cgit v1.2.3 From 61e37ca22b717a9edc3e5e7c7f3603fad464c76d Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Tue, 26 Sep 2006 22:28:36 +0200 Subject: [POWERPC] Avoid NULL pointer in gpio1_interrupt gpio1_interrupt() may dereference a NULL pointer if ioremap() fails. But, maybe no gpio interrupt happens in the first place? Signed-off-by: Olaf Hering Signed-off-by: Paul Mackerras --- drivers/macintosh/via-pmu.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index dda03985dcf..5710e01cef1 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -336,8 +336,10 @@ int __init find_via_pmu(void) if (gaddr != OF_BAD_ADDR) gpio_reg = ioremap(gaddr, 0x10); } - if (gpio_reg == NULL) + if (gpio_reg == NULL) { printk(KERN_ERR "via-pmu: Can't find GPIO reg !\n"); + goto fail_gpio; + } } else pmu_kind = PMU_UNKNOWN; @@ -365,6 +367,9 @@ int __init find_via_pmu(void) return 1; fail: of_node_put(vias); + iounmap(gpio_reg); + gpio_reg = NULL; + fail_gpio: vias = NULL; return 0; } -- cgit v1.2.3 From 07bd1c4a82d1787d6acc32b5e3873cca24f39769 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Wed, 27 Sep 2006 08:18:55 +0100 Subject: [POWERPC] Use check_legacy_ioport() for ISAPnP Signed-off-by: David Woodhouse Signed-off-by: Paul Mackerras --- drivers/pnp/isapnp/core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/pnp/isapnp/core.c b/drivers/pnp/isapnp/core.c index f2e0179962e..3ac5b123215 100644 --- a/drivers/pnp/isapnp/core.c +++ b/drivers/pnp/isapnp/core.c @@ -1049,6 +1049,10 @@ static int __init isapnp_init(void) printk(KERN_INFO "isapnp: ISA Plug & Play support disabled\n"); return 0; } +#ifdef CONFIG_PPC_MERGE + if (check_legacy_ioport(_PIDXR) || check_legacy_ioport(_PNPWRP)) + return -EINVAL; +#endif #ifdef ISAPNP_REGION_OK if (!request_region(_PIDXR, 1, "isapnp index")) { printk(KERN_ERR "isapnp: Index Register 0x%x already used\n", _PIDXR); -- cgit v1.2.3 From 5e980823581682d1566e7b5089cf827ddd5f3c94 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Fri, 29 Sep 2006 18:15:52 +0800 Subject: [POWERPC] Fix rheap alignment problem Honor alignment parameter in the rheap allocator. This is needed by qe_lib. Remove compile warning. Signed-off-by: Pantelis Antoniou Signed-off-by: Li Yang Acked-by: Kumar Galak Signed-off-by: Paul Mackerras --- arch/powerpc/lib/Makefile | 1 + arch/powerpc/lib/rheap.c | 24 ++++++++++++++++++++---- include/asm-ppc/rheap.h | 4 ++++ 3 files changed, 25 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 8030f6245d8..a0360ae10d0 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -14,6 +14,7 @@ endif obj-$(CONFIG_PPC64) += checksum_64.o copypage_64.o copyuser_64.o \ memcpy_64.o usercopy_64.o mem_64.o string.o \ strcase.o +obj-$(CONFIG_QUICC_ENGINE) += rheap.o obj-$(CONFIG_XMON) += sstep.o ifeq ($(CONFIG_PPC64),y) diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c index 31e511856dc..57bf991ccd6 100644 --- a/arch/powerpc/lib/rheap.c +++ b/arch/powerpc/lib/rheap.c @@ -423,17 +423,21 @@ void *rh_detach_region(rh_info_t * info, void *start, int size) return (void *)s; } -void *rh_alloc(rh_info_t * info, int size, const char *owner) +void *rh_alloc_align(rh_info_t * info, int size, int alignment, const char *owner) { struct list_head *l; rh_block_t *blk; rh_block_t *newblk; void *start; - /* Validate size */ - if (size <= 0) + /* Validate size, (must be power of two) */ + if (size <= 0 || (alignment & (alignment - 1)) != 0) return ERR_PTR(-EINVAL); + /* given alignment larger that default rheap alignment */ + if (alignment > info->alignment) + size += alignment - 1; + /* Align to configured alignment */ size = (size + (info->alignment - 1)) & ~(info->alignment - 1); @@ -476,15 +480,27 @@ void *rh_alloc(rh_info_t * info, int size, const char *owner) attach_taken_block(info, newblk); + /* for larger alignment return fixed up pointer */ + /* this is no problem with the deallocator since */ + /* we scan for pointers that lie in the blocks */ + if (alignment > info->alignment) + start = (void *)(((unsigned long)start + alignment - 1) & + ~(alignment - 1)); + return start; } +void *rh_alloc(rh_info_t * info, int size, const char *owner) +{ + return rh_alloc_align(info, size, info->alignment, owner); +} + /* allocate at precisely the given address */ void *rh_alloc_fixed(rh_info_t * info, void *start, int size, const char *owner) { struct list_head *l; rh_block_t *blk, *newblk1, *newblk2; - unsigned long s, e, m, bs, be; + unsigned long s, e, m, bs = 0, be = 0; /* Validate size */ if (size <= 0) diff --git a/include/asm-ppc/rheap.h b/include/asm-ppc/rheap.h index e6ca1f67ced..65b93225a77 100644 --- a/include/asm-ppc/rheap.h +++ b/include/asm-ppc/rheap.h @@ -62,6 +62,10 @@ extern int rh_attach_region(rh_info_t * info, void *start, int size); /* Detach a free region */ extern void *rh_detach_region(rh_info_t * info, void *start, int size); +/* Allocate the given size from the remote heap (with alignment) */ +extern void *rh_alloc_align(rh_info_t * info, int size, int alignment, + const char *owner); + /* Allocate the given size from the remote heap */ extern void *rh_alloc(rh_info_t * info, int size, const char *owner); -- cgit v1.2.3