From c848bc8538cd29e92223d5e72e8fb60e6f2e176e Mon Sep 17 00:00:00 2001 From: Sangbeom Kim Date: Mon, 18 Jun 2012 09:49:20 +0900 Subject: regulator: s5m8767a: Support AP watchdog reset operation The S5M8767A can't know status of ap reset. So, After AP watchdog reset, AP can't boot normally. Problem can be happened like below condition. - AP Bootable lowest voltage(vdd_arm): 0.9v - AP DVFS voltage table: 0.8v, 0.9v, 1.0v - During AP works on lowest voltage(0.8V), watchdog reset is asserted - AP can't boot, because vdd arm is still 0.8v Solution - Basic concept: After ap watchdog reset, GPIO configuration is changed by default value - S5M8767A has function of voltage control with gpio (8 levels with 3 gpios) - Set bootable voltage on level 0 -> can work with default gpio configuration - In the probing, Change voltage control level from level 0 to level 1 - Execute normal dvfs operation on level 1 - After watchdog reset, ap gpio is set by default value - PMIC operation mode is changed by ap reset (level1 -> level0) - Regardless of previous vdd_arm voltage, AP always can be booted. Signed-off-by: Sangbeom Kim Signed-off-by: Mark Brown --- drivers/regulator/s5m8767.c | 137 ++++++++++++++++++++++++----------- include/linux/mfd/s5m87xx/s5m-core.h | 5 ++ 2 files changed, 98 insertions(+), 44 deletions(-) diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c index a4a3c7eefd1..fd89574c405 100644 --- a/drivers/regulator/s5m8767.c +++ b/drivers/regulator/s5m8767.c @@ -41,6 +41,7 @@ struct s5m8767_info { u8 buck3_vol[8]; u8 buck4_vol[8]; int buck_gpios[3]; + int buck_ds[3]; int buck_gpioindex; }; @@ -283,17 +284,17 @@ static int s5m8767_get_voltage_register(struct regulator_dev *rdev, int *_reg) reg = S5M8767_REG_BUCK1CTRL2; break; case S5M8767_BUCK2: - reg = S5M8767_REG_BUCK2DVS1; + reg = S5M8767_REG_BUCK2DVS2; if (s5m8767->buck2_gpiodvs) reg += s5m8767->buck_gpioindex; break; case S5M8767_BUCK3: - reg = S5M8767_REG_BUCK3DVS1; + reg = S5M8767_REG_BUCK3DVS2; if (s5m8767->buck3_gpiodvs) reg += s5m8767->buck_gpioindex; break; case S5M8767_BUCK4: - reg = S5M8767_REG_BUCK4DVS1; + reg = S5M8767_REG_BUCK4DVS2; if (s5m8767->buck4_gpiodvs) reg += s5m8767->buck_gpioindex; break; @@ -512,7 +513,7 @@ static __devinit int s5m8767_pmic_probe(struct platform_device *pdev) struct regulator_config config = { }; struct regulator_dev **rdev; struct s5m8767_info *s5m8767; - int i, ret, size; + int i, ret, size, buck_init; if (!pdata) { dev_err(pdev->dev.parent, "Platform data not supplied\n"); @@ -563,12 +564,37 @@ static __devinit int s5m8767_pmic_probe(struct platform_device *pdev) s5m8767->buck_gpios[0] = pdata->buck_gpios[0]; s5m8767->buck_gpios[1] = pdata->buck_gpios[1]; s5m8767->buck_gpios[2] = pdata->buck_gpios[2]; + s5m8767->buck_ds[0] = pdata->buck_ds[0]; + s5m8767->buck_ds[1] = pdata->buck_ds[1]; + s5m8767->buck_ds[2] = pdata->buck_ds[2]; + s5m8767->ramp_delay = pdata->buck_ramp_delay; s5m8767->buck2_ramp = pdata->buck2_ramp_enable; s5m8767->buck3_ramp = pdata->buck3_ramp_enable; s5m8767->buck4_ramp = pdata->buck4_ramp_enable; s5m8767->opmode = pdata->opmode; + buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2, + pdata->buck2_init, + pdata->buck2_init + + buck_voltage_val2.step); + + s5m_reg_write(s5m8767->iodev, S5M8767_REG_BUCK2DVS2, buck_init); + + buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2, + pdata->buck3_init, + pdata->buck3_init + + buck_voltage_val2.step); + + s5m_reg_write(s5m8767->iodev, S5M8767_REG_BUCK3DVS2, buck_init); + + buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2, + pdata->buck4_init, + pdata->buck4_init + + buck_voltage_val2.step); + + s5m_reg_write(s5m8767->iodev, S5M8767_REG_BUCK4DVS2, buck_init); + for (i = 0; i < 8; i++) { if (s5m8767->buck2_gpiodvs) { s5m8767->buck2_vol[i] = @@ -598,48 +624,71 @@ static __devinit int s5m8767_pmic_probe(struct platform_device *pdev) } } - if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs || - pdata->buck4_gpiodvs) { - if (gpio_is_valid(pdata->buck_gpios[0]) && - gpio_is_valid(pdata->buck_gpios[1]) && - gpio_is_valid(pdata->buck_gpios[2])) { - ret = gpio_request(pdata->buck_gpios[0], - "S5M8767 SET1"); - if (ret == -EBUSY) - dev_warn(&pdev->dev, "Duplicated gpio request for SET1\n"); - - ret = gpio_request(pdata->buck_gpios[1], - "S5M8767 SET2"); - if (ret == -EBUSY) - dev_warn(&pdev->dev, "Duplicated gpio request for SET2\n"); - - ret = gpio_request(pdata->buck_gpios[2], - "S5M8767 SET3"); - if (ret == -EBUSY) - dev_warn(&pdev->dev, "Duplicated gpio request for SET3\n"); - /* SET1 GPIO */ - gpio_direction_output(pdata->buck_gpios[0], - (s5m8767->buck_gpioindex >> 2) & 0x1); - /* SET2 GPIO */ - gpio_direction_output(pdata->buck_gpios[1], - (s5m8767->buck_gpioindex >> 1) & 0x1); - /* SET3 GPIO */ - gpio_direction_output(pdata->buck_gpios[2], - (s5m8767->buck_gpioindex >> 0) & 0x1); - ret = 0; - } else { - dev_err(&pdev->dev, "GPIO NOT VALID\n"); - ret = -EINVAL; - return ret; - } + if (gpio_is_valid(pdata->buck_gpios[0]) && + gpio_is_valid(pdata->buck_gpios[1]) && + gpio_is_valid(pdata->buck_gpios[2])) { + ret = gpio_request(pdata->buck_gpios[0], "S5M8767 SET1"); + if (ret == -EBUSY) + dev_warn(&pdev->dev, "Duplicated gpio request" + " for SET1\n"); + + ret = gpio_request(pdata->buck_gpios[1], "S5M8767 SET2"); + if (ret == -EBUSY) + dev_warn(&pdev->dev, "Duplicated gpio request" + " for SET2\n"); + + ret = gpio_request(pdata->buck_gpios[2], "S5M8767 SET3"); + if (ret == -EBUSY) + dev_warn(&pdev->dev, "Duplicated gpio request" + " for SET3\n"); + /* SET1 GPIO */ + gpio_direction_output(pdata->buck_gpios[0], + (s5m8767->buck_gpioindex >> 2) & 0x1); + /* SET2 GPIO */ + gpio_direction_output(pdata->buck_gpios[1], + (s5m8767->buck_gpioindex >> 1) & 0x1); + /* SET3 GPIO */ + gpio_direction_output(pdata->buck_gpios[2], + (s5m8767->buck_gpioindex >> 0) & 0x1); + ret = 0; + + } else { + dev_err(&pdev->dev, "GPIO NOT VALID\n"); + ret = -EINVAL; + return ret; } - s5m_reg_update(s5m8767->iodev, S5M8767_REG_BUCK2CTRL, - (pdata->buck2_gpiodvs) ? (1 << 1) : (0 << 1), 1 << 1); - s5m_reg_update(s5m8767->iodev, S5M8767_REG_BUCK3CTRL, - (pdata->buck3_gpiodvs) ? (1 << 1) : (0 << 1), 1 << 1); - s5m_reg_update(s5m8767->iodev, S5M8767_REG_BUCK4CTRL, - (pdata->buck4_gpiodvs) ? (1 << 1) : (0 << 1), 1 << 1); + ret = gpio_request(pdata->buck_ds[0], "S5M8767 DS2"); + if (ret == -EBUSY) + dev_warn(&pdev->dev, "Duplicated gpio request for DS2\n"); + + ret = gpio_request(pdata->buck_ds[1], "S5M8767 DS3"); + if (ret == -EBUSY) + dev_warn(&pdev->dev, "Duplicated gpio request for DS3\n"); + + ret = gpio_request(pdata->buck_ds[2], "S5M8767 DS4"); + if (ret == -EBUSY) + dev_warn(&pdev->dev, "Duplicated gpio request for DS4\n"); + + /* DS2 GPIO */ + gpio_direction_output(pdata->buck_ds[0], 0x0); + /* DS3 GPIO */ + gpio_direction_output(pdata->buck_ds[1], 0x0); + /* DS4 GPIO */ + gpio_direction_output(pdata->buck_ds[2], 0x0); + + if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs || + pdata->buck4_gpiodvs) { + s5m_reg_update(s5m8767->iodev, S5M8767_REG_BUCK2CTRL, + (pdata->buck2_gpiodvs) ? (1 << 1) : (0 << 1), + 1 << 1); + s5m_reg_update(s5m8767->iodev, S5M8767_REG_BUCK3CTRL, + (pdata->buck3_gpiodvs) ? (1 << 1) : (0 << 1), + 1 << 1); + s5m_reg_update(s5m8767->iodev, S5M8767_REG_BUCK4CTRL, + (pdata->buck4_gpiodvs) ? (1 << 1) : (0 << 1), + 1 << 1); + } /* Initialize GPIO DVS registers */ for (i = 0; i < 8; i++) { diff --git a/include/linux/mfd/s5m87xx/s5m-core.h b/include/linux/mfd/s5m87xx/s5m-core.h index 21603b42f22..0b2e0ed309f 100644 --- a/include/linux/mfd/s5m87xx/s5m-core.h +++ b/include/linux/mfd/s5m87xx/s5m-core.h @@ -347,6 +347,7 @@ struct s5m_platform_data { bool buck_voltage_lock; int buck_gpios[3]; + int buck_ds[3]; int buck2_voltage[8]; bool buck2_gpiodvs; int buck3_voltage[8]; @@ -369,6 +370,10 @@ struct s5m_platform_data { bool buck2_ramp_enable; bool buck3_ramp_enable; bool buck4_ramp_enable; + + int buck2_init; + int buck3_init; + int buck4_init; }; #endif /* __LINUX_MFD_S5M_CORE_H */ -- cgit v1.2.3