From 1690970d0d28051e2652d9bae2f73288e017e142 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Thu, 6 Dec 2012 16:09:00 +0000 Subject: iio:adf4350: Fix typo There is a typo in the adf4350 driver turning a shift into a compare. This patch fixes it. Signed-off-by: Michael Hennerich Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/iio/frequency/adf4350.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/frequency/adf4350.c b/drivers/iio/frequency/adf4350.c index e35bb8f6fe7..c7de8b5a01f 100644 --- a/drivers/iio/frequency/adf4350.c +++ b/drivers/iio/frequency/adf4350.c @@ -173,7 +173,7 @@ static int adf4350_set_freq(struct adf4350_state *st, unsigned long long freq) } while ((st->r1_mod > ADF4350_MAX_MODULUS) && r_cnt); } while (r_cnt == 0); - tmp = freq * (u64)st->r1_mod + (st->fpfd > 1); + tmp = freq * (u64)st->r1_mod + (st->fpfd >> 1); do_div(tmp, st->fpfd); /* Div round closest (n + d/2)/d */ st->r0_fract = do_div(tmp, st->r1_mod); st->r0_int = tmp; -- cgit v1.2.3 From 31ad70ea585f744ba8d1310807dcf99043d4f3c4 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 6 Dec 2012 13:48:00 +0000 Subject: staging:iio:adis16260: Select adislib Commit 9d5e9fdf ("staging:iio:adis16260: Use adis library") switched over the adis16260 driver to use the common adis library but neglected to update the Kconfig entry to reflect the change. This leads to the following compile error if no other driver selects the adis library: drivers/built-in.o: In function `adis16260_write_frequency': adis16260_core.c:(.text+0x5a83bf): undefined reference to `adis_write_reg_8' drivers/built-in.o: In function `adis16260_read_frequency': adis16260_core.c:(.text+0x5a8433): undefined reference to `adis_read_reg_16' drivers/built-in.o: In function `adis16260_write_raw': adis16260_core.c:(.text+0x5a8538): undefined reference to `adis_write_reg_16' adis16260_core.c:(.text+0x5a856b): undefined reference to `adis_write_reg_16' drivers/built-in.o: In function `adis16260_read_raw': adis16260_core.c:(.text+0x5a85d3): undefined reference to `adis_single_conversion' adis16260_core.c:(.text+0x5a873e): undefined reference to `adis_read_reg_16' adis16260_core.c:(.text+0x5a87fb): undefined reference to `adis_read_reg_16' drivers/built-in.o: In function `adis16260_probe': adis16260_core.c:(.devinit.text+0x5c6b8): undefined reference to `adis_init' adis16260_core.c:(.devinit.text+0x5c799): undefined reference to `adis_initial_startup' drivers/built-in.o: In function `adis16260_remove': adis16260_core.c:(.devexit.text+0x9943): undefined reference to `adis_write_reg_16' This patch updates the adis16260 Kconfig entry to select the adis library. Reported-by: Fengguang Wu Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/gyro/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/iio/gyro/Kconfig b/drivers/staging/iio/gyro/Kconfig index ea295b25308..87979a0d03a 100644 --- a/drivers/staging/iio/gyro/Kconfig +++ b/drivers/staging/iio/gyro/Kconfig @@ -27,8 +27,8 @@ config ADIS16130 config ADIS16260 tristate "Analog Devices ADIS16260 Digital Gyroscope Sensor SPI driver" depends on SPI - select IIO_TRIGGER if IIO_BUFFER - select IIO_SW_RING if IIO_BUFFER + select IIO_ADIS_LIB + select IIO_ADIS_LIB_BUFFER if IIO_BUFFER help Say yes here to build support for Analog Devices ADIS16260 ADIS16265 ADIS16250 ADIS16255 and ADIS16251 programmable digital gyroscope sensors. -- cgit v1.2.3 From 116797672ffdd3635eafa25db5bd312e65c5ad01 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Wed, 12 Dec 2012 15:17:00 +0000 Subject: iio: at91: fix dev var name in at91_adc_trigger_handler /opt/work/linux-2.6/drivers/iio/adc/at91_adc.c: In function 'at91_adc_trigger_handler': /opt/work/linux-2.6/drivers/iio/adc/at91_adc.c:83:22: error: 'indio_dev' undeclared (first use in this function) /opt/work/linux-2.6/drivers/iio/adc/at91_adc.c:83:22: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: linux-iio@vger.kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/adc/at91_adc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index 03b85940f4b..315bed1f401 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -80,7 +80,7 @@ static irqreturn_t at91_adc_trigger_handler(int irq, void *p) *timestamp = pf->timestamp; } - iio_push_to_buffers(indio_dev, (u8 *)st->buffer); + iio_push_to_buffers(idev, (u8 *)st->buffer); iio_trigger_notify_done(idev->trig); -- cgit v1.2.3 From 9541cc39a6381b76dac30c8e05078eb0a543f113 Mon Sep 17 00:00:00 2001 From: Alexander Holler Date: Tue, 11 Dec 2012 18:21:00 +0000 Subject: iio: hid-sensors: respect CONFIG_IIO_TRIGGER Not much to say, without that change, hid-sensor-trigger will be always compiled if HID_SENSOR_IIO_COMMON is selected which fails if CONFIG_IIO_TRIGGER is not set because CONFIG_IIO_CONSUMERS_PER_TRIGGER will not be defined. Signed-off-by: Alexander Holler Signed-off-by: Jonathan Cameron --- drivers/iio/accel/Kconfig | 1 + drivers/iio/common/hid-sensors/Kconfig | 13 ++++++++++++- drivers/iio/common/hid-sensors/Makefile | 3 ++- drivers/iio/gyro/Kconfig | 1 + drivers/iio/light/Kconfig | 1 + drivers/iio/magnetometer/Kconfig | 1 + 6 files changed, 18 insertions(+), 2 deletions(-) diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index fe4bcd7c5b1..05e996fafc9 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -8,6 +8,7 @@ config HID_SENSOR_ACCEL_3D select IIO_BUFFER select IIO_TRIGGERED_BUFFER select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER tristate "HID Accelerometers 3D" help Say yes here to build support for the HID SENSOR diff --git a/drivers/iio/common/hid-sensors/Kconfig b/drivers/iio/common/hid-sensors/Kconfig index ae10778da7a..1178121b55b 100644 --- a/drivers/iio/common/hid-sensors/Kconfig +++ b/drivers/iio/common/hid-sensors/Kconfig @@ -6,7 +6,7 @@ menu "Hid Sensor IIO Common" config HID_SENSOR_IIO_COMMON tristate "Common modules for all HID Sensor IIO drivers" depends on HID_SENSOR_HUB - select IIO_TRIGGER if IIO_BUFFER + select HID_SENSOR_IIO_TRIGGER if IIO_BUFFER help Say yes here to build support for HID sensor to use HID sensor common processing for attributes and IIO triggers. @@ -14,6 +14,17 @@ config HID_SENSOR_IIO_COMMON HID sensor drivers, this module contains processing for those attributes. +config HID_SENSOR_IIO_TRIGGER + tristate "Common module (trigger) for all HID Sensor IIO drivers" + depends on HID_SENSOR_HUB && HID_SENSOR_IIO_COMMON + select IIO_TRIGGER + help + Say yes here to build trigger support for HID sensors. + Triggers will be send if all requested attributes were read. + + If this driver is compiled as a module, it will be named + hid-sensor-trigger. + config HID_SENSOR_ENUM_BASE_QUIRKS bool "ENUM base quirks for HID Sensor IIO drivers" depends on HID_SENSOR_IIO_COMMON diff --git a/drivers/iio/common/hid-sensors/Makefile b/drivers/iio/common/hid-sensors/Makefile index 1f463e00c24..22e7c5a8232 100644 --- a/drivers/iio/common/hid-sensors/Makefile +++ b/drivers/iio/common/hid-sensors/Makefile @@ -3,4 +3,5 @@ # obj-$(CONFIG_HID_SENSOR_IIO_COMMON) += hid-sensor-iio-common.o -hid-sensor-iio-common-y := hid-sensor-attributes.o hid-sensor-trigger.o +obj-$(CONFIG_HID_SENSOR_IIO_TRIGGER) += hid-sensor-trigger.o +hid-sensor-iio-common-y := hid-sensor-attributes.o diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig index 48ed1483ff2..96b68f63a90 100644 --- a/drivers/iio/gyro/Kconfig +++ b/drivers/iio/gyro/Kconfig @@ -17,6 +17,7 @@ config HID_SENSOR_GYRO_3D select IIO_BUFFER select IIO_TRIGGERED_BUFFER select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER tristate "HID Gyroscope 3D" help Say yes here to build support for the HID SENSOR diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index 1763c9bcb98..dbf80abc834 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -47,6 +47,7 @@ config HID_SENSOR_ALS select IIO_BUFFER select IIO_TRIGGERED_BUFFER select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER tristate "HID ALS" help Say yes here to build support for the HID SENSOR diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig index c1f0cdd5703..ff11d68225c 100644 --- a/drivers/iio/magnetometer/Kconfig +++ b/drivers/iio/magnetometer/Kconfig @@ -8,6 +8,7 @@ config HID_SENSOR_MAGNETOMETER_3D select IIO_BUFFER select IIO_TRIGGERED_BUFFER select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER tristate "HID Magenetometer 3D" help Say yes here to build support for the HID SENSOR -- cgit v1.2.3 From 36ce0c1c3ab7ea54fa6c2b3a0803c7ab0adcefbf Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 14 Dec 2012 07:47:00 +0000 Subject: iio: adc: ad7266: Don't set error code to st->vref_uv regulator_get_voltage() may return negative error code. Add error checking to avoid setting error code to st->vref_uv. Signed-off-by: Axel Lin Acked-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7266.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c index a6f4fc5f820..e36107dc30b 100644 --- a/drivers/iio/adc/ad7266.c +++ b/drivers/iio/adc/ad7266.c @@ -411,7 +411,11 @@ static int __devinit ad7266_probe(struct spi_device *spi) if (ret) goto error_put_reg; - st->vref_uv = regulator_get_voltage(st->reg); + ret = regulator_get_voltage(st->reg); + if (ret < 0) + goto error_disable_reg; + + st->vref_uv = ret; } else { /* Use internal reference */ st->vref_uv = 2500000; -- cgit v1.2.3 From 272cc9c8b5d0dffe9fb03e6c0ab3da2fde9c20e9 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 14 Dec 2012 07:48:00 +0000 Subject: iio: dac: ad5380: Don't set error code to st->vref regulator_get_voltage() may return negative error code. Add error checking to avoid setting error code to st->vref_uv. Signed-off-by: Axel Lin Acked-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/iio/dac/ad5380.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/iio/dac/ad5380.c b/drivers/iio/dac/ad5380.c index 14991ac55f2..4aca1895ce5 100644 --- a/drivers/iio/dac/ad5380.c +++ b/drivers/iio/dac/ad5380.c @@ -406,7 +406,11 @@ static int __devinit ad5380_probe(struct device *dev, struct regmap *regmap, goto error_free_reg; } - st->vref = regulator_get_voltage(st->vref_reg); + ret = regulator_get_voltage(st->vref_reg); + if (ret < 0) + goto error_disable_reg; + + st->vref = ret; } else { st->vref = st->chip_info->int_vref; ctrl |= AD5380_CTRL_INT_VREF_EN; -- cgit v1.2.3 From 7e2dcc69824288916b55f90cd6db4992a0d95374 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 14 Dec 2012 07:55:00 +0000 Subject: iio: dac: ad5791: Don't set error code to [pos|neg]_voltage_uv regulator_get_voltage() may return negative error code. Don't set error code to to pos_voltage_uv and neg_voltage_uv. Signed-off-by: Axel Lin Acked-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/iio/dac/ad5791.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/iio/dac/ad5791.c b/drivers/iio/dac/ad5791.c index 2bd2e37280f..6efe83e32ac 100644 --- a/drivers/iio/dac/ad5791.c +++ b/drivers/iio/dac/ad5791.c @@ -365,7 +365,11 @@ static int __devinit ad5791_probe(struct spi_device *spi) if (ret) goto error_put_reg_pos; - pos_voltage_uv = regulator_get_voltage(st->reg_vdd); + ret = regulator_get_voltage(st->reg_vdd); + if (ret < 0) + goto error_disable_reg_pos; + + pos_voltage_uv = ret; } st->reg_vss = regulator_get(&spi->dev, "vss"); @@ -374,7 +378,11 @@ static int __devinit ad5791_probe(struct spi_device *spi) if (ret) goto error_put_reg_neg; - neg_voltage_uv = regulator_get_voltage(st->reg_vss); + ret = regulator_get_voltage(st->reg_vss); + if (ret < 0) + goto error_disable_reg_neg; + + neg_voltage_uv = ret; } st->pwr_down = true; @@ -428,6 +436,7 @@ error_put_reg_neg: if (!IS_ERR(st->reg_vss)) regulator_put(st->reg_vss); +error_disable_reg_pos: if (!IS_ERR(st->reg_vdd)) regulator_disable(st->reg_vdd); error_put_reg_pos: -- cgit v1.2.3 From 0ce2fdaa97c6a8d84e9fce3d920a45a493145623 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 14 Dec 2012 12:06:00 +0000 Subject: iio: dac: ad5504: Don't set error code to voltage_uv regulator_get_voltage() may return negative error code. Add error checking to avoid setting error code to voltage_uv. Signed-off-by: Axel Lin Acked-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/iio/dac/ad5504.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/iio/dac/ad5504.c b/drivers/iio/dac/ad5504.c index 242bdc7d004..7f7c026b9d8 100644 --- a/drivers/iio/dac/ad5504.c +++ b/drivers/iio/dac/ad5504.c @@ -296,7 +296,11 @@ static int __devinit ad5504_probe(struct spi_device *spi) if (ret) goto error_put_reg; - voltage_uv = regulator_get_voltage(reg); + ret = regulator_get_voltage(reg); + if (ret < 0) + goto error_disable_reg; + + voltage_uv = ret; } spi_set_drvdata(spi, indio_dev); -- cgit v1.2.3 From 8434e7856551015650f62afa48e8f9e9b4bf80f2 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 14 Dec 2012 12:07:00 +0000 Subject: iio: dac: ad5624r_spi: Don't set error code to voltage_uv regulator_get_voltage() may return negative error code. Add error checking to avoid setting error code to voltage_uv. Signed-off-by: Axel Lin Acked-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/iio/dac/ad5624r_spi.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/iio/dac/ad5624r_spi.c b/drivers/iio/dac/ad5624r_spi.c index 6a7d6a48cc6..14ea3dbf490 100644 --- a/drivers/iio/dac/ad5624r_spi.c +++ b/drivers/iio/dac/ad5624r_spi.c @@ -238,7 +238,11 @@ static int __devinit ad5624r_probe(struct spi_device *spi) if (ret) goto error_put_reg; - voltage_uv = regulator_get_voltage(st->reg); + ret = regulator_get_voltage(st->reg); + if (ret < 0) + goto error_disable_reg; + + voltage_uv = ret; } spi_set_drvdata(spi, indio_dev); -- cgit v1.2.3 From 359570ad3fcfcc3a3031b3a5e01bfb616233eca0 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 14 Dec 2012 12:08:00 +0000 Subject: iio: dac: ad5686: Don't set error code to voltage_uv regulator_get_voltage() may return negative error code. Add error checking to avoid setting error code to voltage_uv. Signed-off-by: Axel Lin Acked-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/iio/dac/ad5686.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/iio/dac/ad5686.c b/drivers/iio/dac/ad5686.c index bc92ff9309c..01eb1d0e4e4 100644 --- a/drivers/iio/dac/ad5686.c +++ b/drivers/iio/dac/ad5686.c @@ -332,7 +332,11 @@ static int __devinit ad5686_probe(struct spi_device *spi) if (ret) goto error_put_reg; - voltage_uv = regulator_get_voltage(st->reg); + ret = regulator_get_voltage(st->reg); + if (ret < 0) + goto error_disable_reg; + + voltage_uv = ret; } st->chip_info = -- cgit v1.2.3 From 13e57ee2056221296f1926d49d00edd224058bea Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 18 Dec 2012 03:33:00 +0000 Subject: iio: dac: ad5446: Don't set error code to voltage_uv regulator_get_voltage() may return negative error code. Add error checking to avoid setting error code to voltage_uv. Signed-off-by: Axel Lin Signed-off-by: Jonathan Cameron --- drivers/iio/dac/ad5446.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/iio/dac/ad5446.c b/drivers/iio/dac/ad5446.c index 3310cbbd41e..ecb639540df 100644 --- a/drivers/iio/dac/ad5446.c +++ b/drivers/iio/dac/ad5446.c @@ -226,7 +226,11 @@ static int __devinit ad5446_probe(struct device *dev, const char *name, if (ret) goto error_put_reg; - voltage_uv = regulator_get_voltage(reg); + ret = regulator_get_voltage(reg); + if (ret < 0) + goto error_disable_reg; + + voltage_uv = ret; } indio_dev = iio_device_alloc(sizeof(*st)); -- cgit v1.2.3 From 678fb42e2b2c815c3475884017aac4da22124d0d Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 24 Dec 2012 06:24:00 +0000 Subject: iio: (max1363) Fix probe error path Instantiating the driver with no available regulator results in: [39711.686393] i2c i2c-7: new_device: Instantiated device max1139 at 0x35 [39711.688687] BUG: unable to handle kernel paging request at fffffffffffffe13 [39711.688734] IP: [] regulator_disable+0x1b/0x80 [39711.688788] PGD 1c0e067 PUD 1c0f067 PMD 0 [39711.688835] Oops: 0000 [#1] SMP Caused by bad probe error path. Fix it. Driver should also not attempt to free the interrupt in its error path if none was allocated. Fix that problem as well. Finally, testing if the regulator was allocated is not necessary in the remove function, since the probe function bails out if this is the case. Remove that check. Signed-off-by: Guenter Roeck Signed-off-by: Jonathan Cameron --- drivers/iio/adc/max1363.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c index 1e84b5b5509..31f3485303d 100644 --- a/drivers/iio/adc/max1363.c +++ b/drivers/iio/adc/max1363.c @@ -1605,19 +1605,20 @@ static int __devinit max1363_probe(struct i2c_client *client, return 0; error_free_irq: - free_irq(st->client->irq, indio_dev); + if (client->irq) + free_irq(st->client->irq, indio_dev); error_uninit_buffer: iio_buffer_unregister(indio_dev); error_cleanup_buffer: max1363_buffer_cleanup(indio_dev); error_free_available_scan_masks: kfree(indio_dev->available_scan_masks); -error_unregister_map: - iio_map_array_unregister(indio_dev, client->dev.platform_data); error_disable_reg: regulator_disable(st->reg); error_put_reg: regulator_put(st->reg); +error_unregister_map: + iio_map_array_unregister(indio_dev, client->dev.platform_data); error_free_device: iio_device_free(indio_dev); error_out: @@ -1635,10 +1636,8 @@ static int __devexit max1363_remove(struct i2c_client *client) iio_buffer_unregister(indio_dev); max1363_buffer_cleanup(indio_dev); kfree(indio_dev->available_scan_masks); - if (!IS_ERR(st->reg)) { - regulator_disable(st->reg); - regulator_put(st->reg); - } + regulator_disable(st->reg); + regulator_put(st->reg); iio_map_array_unregister(indio_dev, client->dev.platform_data); iio_device_free(indio_dev); -- cgit v1.2.3 From db210312f77b8e0e3652bbbaafe879c24c8ba604 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 13 Dec 2012 19:57:55 -0500 Subject: staging: Make SystemBase PCI Multiport UART only for x86 The sb105x SystemBase PCI UART driver in staging has code specific for x86. This breaks allyesconfig builds for other archs. For now, the quick fix is simply to make this driver depend on x86. When I get time, I'll swap this card out of my main machine and put it into my PowerPC64 box, and get it working there. Then it may become a good samaritan and play nice with other archs. Reported-by: Stephen Rothwell Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman --- drivers/staging/sb105x/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/sb105x/Kconfig b/drivers/staging/sb105x/Kconfig index ac87c5e38de..1facad62555 100644 --- a/drivers/staging/sb105x/Kconfig +++ b/drivers/staging/sb105x/Kconfig @@ -2,6 +2,7 @@ config SB105X tristate "SystemBase PCI Multiport UART" select SERIAL_CORE depends on PCI + depends on X86 help A driver for the SystemBase Multi-2/PCI serial card -- cgit v1.2.3 From b1255fb989e1d11295cd7e530848b6a05baa9331 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 14 Dec 2012 11:45:42 -0500 Subject: staging: Enable parport sb105x drivers if parport is configured Some of the drivers that the sb105x SystemBase handles are for parallel port cards. If PARPORT isn't configured, the build fails. Only initialize the parallel port cards if PARPORT is configured in. Reported-by: Wu Fengguang Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman --- drivers/staging/sb105x/sb_pci_mp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/staging/sb105x/sb_pci_mp.c b/drivers/staging/sb105x/sb_pci_mp.c index edb2a85b9d5..131afd0c460 100644 --- a/drivers/staging/sb105x/sb_pci_mp.c +++ b/drivers/staging/sb105x/sb_pci_mp.c @@ -3054,6 +3054,7 @@ static int init_mp_dev(struct pci_dev *pcidev, mppcibrd_t brd) sbdev->nr_ports = ((portnum_hex/16)*10) + (portnum_hex % 16); } break; +#ifdef CONFIG_PARPORT case PCI_DEVICE_ID_MP2S1P : sbdev->nr_ports = 2; @@ -3073,6 +3074,7 @@ static int init_mp_dev(struct pci_dev *pcidev, mppcibrd_t brd) /* add PC compatible parallel port */ parport_pc_probe_port(pcidev->resource[2].start, pcidev->resource[3].start, PARPORT_IRQ_NONE, PARPORT_DMA_NONE, &pcidev->dev, 0); break; +#endif } ret = request_region(sbdev->uart_access_addr, (8*sbdev->nr_ports), sbdev->name); -- cgit v1.2.3 From 5f3b361a12e121f52fae586798a775606a3bab6b Mon Sep 17 00:00:00 2001 From: Emil Goode Date: Sat, 29 Dec 2012 16:27:17 +0100 Subject: Staging: wlan-ng: Add missing argument MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The commit c8442118 introduced a struct wireless_dev pointer as a second argument of the function pointers set_tx_power and get_tx_power. This patch adds the missing arguments for the wlan-ng driver. Sparse warnings: drivers/staging/wlan-ng/cfg80211.c:735:25: warning: incorrect type in initializer (incompatible argument 2 (different base types)) drivers/staging/wlan-ng/cfg80211.c:735:25: expected int ( *set_tx_power )( ... ) drivers/staging/wlan-ng/cfg80211.c:735:25: got int ( extern [toplevel] * )( ... ) drivers/staging/wlan-ng/cfg80211.c:736:25: warning: incorrect type in initializer (incompatible argument 2 (different base types)) drivers/staging/wlan-ng/cfg80211.c:736:25: expected int ( *get_tx_power )( ... ) drivers/staging/wlan-ng/cfg80211.c:736:25: got int ( extern [toplevel] * )( ... ) drivers/staging/wlan-ng/cfg80211.c:735:2: warning: initialization from incompatible pointer type [enabled by default] drivers/staging/wlan-ng/cfg80211.c:735:2: warning: (near initialization for ‘prism2_usb_cfg_ops.set_tx_power’) [enabled by default] drivers/staging/wlan-ng/cfg80211.c:736:2: warning: initialization from incompatible pointer type [enabled by default] drivers/staging/wlan-ng/cfg80211.c:736:2: warning: (near initialization for ‘prism2_usb_cfg_ops.get_tx_power’) [enabled by default] Signed-off-by: Emil Goode Signed-off-by: Greg Kroah-Hartman --- drivers/staging/wlan-ng/cfg80211.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c index 18c06a59c09..1d31eab19d1 100644 --- a/drivers/staging/wlan-ng/cfg80211.c +++ b/drivers/staging/wlan-ng/cfg80211.c @@ -638,8 +638,8 @@ int prism2_leave_ibss(struct wiphy *wiphy, struct net_device *dev) } -int prism2_set_tx_power(struct wiphy *wiphy, enum nl80211_tx_power_setting type, - int mbm) +int prism2_set_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev, + enum nl80211_tx_power_setting type, int mbm) { struct prism2_wiphy_private *priv = wiphy_priv(wiphy); wlandevice_t *wlandev = priv->wlandev; @@ -665,7 +665,8 @@ exit: return err; } -int prism2_get_tx_power(struct wiphy *wiphy, int *dbm) +int prism2_get_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev, + int *dbm) { struct prism2_wiphy_private *priv = wiphy_priv(wiphy); wlandevice_t *wlandev = priv->wlandev; -- cgit v1.2.3 From da849a92d3bafaf24d770e971c2c9e5c3f60b5d1 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sat, 29 Dec 2012 11:36:53 -0600 Subject: staging: r8712u: Add new device ID The ISY IWL 1000 USB WLAN stick with USB ID 050d:11f1 is a clone of the Belkin F7D1101 V1 device. Reported-by: Thomas Hartmann Signed-off-by: Larry Finger Cc: Thomas Hartmann Cc: Stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8712/usb_intf.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/staging/rtl8712/usb_intf.c b/drivers/staging/rtl8712/usb_intf.c index 6b73843e580..a96cd06d69d 100644 --- a/drivers/staging/rtl8712/usb_intf.c +++ b/drivers/staging/rtl8712/usb_intf.c @@ -63,6 +63,8 @@ static struct usb_device_id rtl871x_usb_id_tbl[] = { {USB_DEVICE(0x0B05, 0x1791)}, /* 11n mode disable */ /* Belkin */ {USB_DEVICE(0x050D, 0x945A)}, + /* ISY IWL - Belkin clone */ + {USB_DEVICE(0x050D, 0x11F1)}, /* Corega */ {USB_DEVICE(0x07AA, 0x0047)}, /* D-Link */ -- cgit v1.2.3 From 9929362348096bd9396c523338127fc9b7487c42 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Wed, 28 Nov 2012 14:51:22 -0500 Subject: staging/fwserial: Refine Kconfig help text Users should be informed upfront that this is a Linux-only affair currently. Signed-off-by: Peter Hurley Acked-by: Stefan Richter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/fwserial/Kconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/staging/fwserial/Kconfig b/drivers/staging/fwserial/Kconfig index 580406cb180..b2f8331e4ac 100644 --- a/drivers/staging/fwserial/Kconfig +++ b/drivers/staging/fwserial/Kconfig @@ -3,7 +3,9 @@ config FIREWIRE_SERIAL depends on FIREWIRE help This enables TTY over IEEE 1394, providing high-speed serial - connectivity to cabled peers. + connectivity to cabled peers. This driver implements a + ad-hoc transport protocol and is currently limited to + Linux-to-Linux communication. To compile this driver as a module, say M here: the module will be called firewire-serial. -- cgit v1.2.3 From 0555cb987ae76b53dc19e33c308e747b43622741 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Wed, 28 Nov 2012 14:51:23 -0500 Subject: staging/fwserial: Limit tx/rx to 1394-2008 spec maximum Per this conversation https://lkml.org/lkml/2012/11/27/587 limit the maximum transmission to the IEEE 1394-2008 specification maximum size of 4096 bytes for asynchronous packets. Signed-off-by: Peter Hurley Acked-by: Stefan Richter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/fwserial/TODO | 3 --- drivers/staging/fwserial/fwserial.c | 2 +- drivers/staging/fwserial/fwserial.h | 6 +++--- 3 files changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/staging/fwserial/TODO b/drivers/staging/fwserial/TODO index 726900548ea..ffe47d1d8c1 100644 --- a/drivers/staging/fwserial/TODO +++ b/drivers/staging/fwserial/TODO @@ -12,9 +12,6 @@ TODOs 1. This driver uses the same unregistered vendor id that the firewire core does (0xd00d1e). Perhaps this could be exposed as a define in firewire-constants.h? -2. MAX_ASYNC_PAYLOAD needs to be publicly exposed by core/ohci - - otherwise how will this driver know the max size of address window to - open for one packet write? 3. Maybe device_max_receive() and link_speed_to_max_payload() should be taken up by the firewire core? 4. To avoid dropping rx data while still limiting the maximum buffering, diff --git a/drivers/staging/fwserial/fwserial.c b/drivers/staging/fwserial/fwserial.c index 61ee29083b2..d03a7f57e8d 100644 --- a/drivers/staging/fwserial/fwserial.c +++ b/drivers/staging/fwserial/fwserial.c @@ -179,7 +179,7 @@ static void dump_profile(struct seq_file *m, struct stats *stats) /* Returns the max receive packet size for the given card */ static inline int device_max_receive(struct fw_device *fw_device) { - return 1 << (clamp_t(int, fw_device->max_rec, 8U, 13U) + 1); + return 1 << (clamp_t(int, fw_device->max_rec, 8U, 11U) + 1); } static void fwtty_log_tx_error(struct fwtty_port *port, int rcode) diff --git a/drivers/staging/fwserial/fwserial.h b/drivers/staging/fwserial/fwserial.h index 8b572edf956..caa1c1ea82d 100644 --- a/drivers/staging/fwserial/fwserial.h +++ b/drivers/staging/fwserial/fwserial.h @@ -374,10 +374,10 @@ static inline void fwtty_bind_console(struct fwtty_port *port, */ static inline int link_speed_to_max_payload(unsigned speed) { - static const int max_async[] = { 307, 614, 1229, 2458, 4916, 9832, }; - BUILD_BUG_ON(ARRAY_SIZE(max_async) - 1 != SCODE_3200); + static const int max_async[] = { 307, 614, 1229, 2458, }; + BUILD_BUG_ON(ARRAY_SIZE(max_async) - 1 != SCODE_800); - speed = clamp(speed, (unsigned) SCODE_100, (unsigned) SCODE_3200); + speed = clamp(speed, (unsigned) SCODE_100, (unsigned) SCODE_800); if (limit_bw) return max_async[speed]; else -- cgit v1.2.3 From 3c8c21e63a44de815e924b1605ee8351c5703d0b Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Wed, 28 Nov 2012 14:51:24 -0500 Subject: staging/fwserial: Update TODO file per reviewer comments Pursuant to this review https://lkml.org/lkml/2012/11/12/500 by Stefan Richter, update the TODO file. - Clarify purpose of TODO file - Remove firewire item #4. As discussed in this conversation https://lkml.org/lkml/2012/11/13/564 knowing the AR buffer size is not a hard requirement. The required rx buffer size can be determined experimentally. - Remove firewire item #5. This was a private note for further experimentation. - Change firewire item #1. Change suggested header from uapi header to kernel-only header. Signed-off-by: Peter Hurley Acked-by: Stefan Richter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/fwserial/TODO | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/drivers/staging/fwserial/TODO b/drivers/staging/fwserial/TODO index ffe47d1d8c1..8dae8fb2522 100644 --- a/drivers/staging/fwserial/TODO +++ b/drivers/staging/fwserial/TODO @@ -1,5 +1,5 @@ -TODOs ------ +TODOs prior to this driver moving out of staging +------------------------------------------------ 1. Implement retries for RCODE_BUSY, RCODE_NO_ACK and RCODE_SEND_ERROR - I/O is handled asynchronously which presents some issues when error conditions occur. @@ -11,14 +11,9 @@ TODOs -- Issues with firewire stack -- 1. This driver uses the same unregistered vendor id that the firewire core does (0xd00d1e). Perhaps this could be exposed as a define in - firewire-constants.h? + firewire.h? 3. Maybe device_max_receive() and link_speed_to_max_payload() should be taken up by the firewire core? -4. To avoid dropping rx data while still limiting the maximum buffering, - the size of the AR context must be known. How to expose this to drivers? -5. Explore if bigger AR context will reduce RCODE_BUSY responses - (or auto-grow to certain max size -- but this would require major surgery - as the current AR is contiguously mapped) -- Issues with TTY core -- 1. Hack for alternate device name scheme -- cgit v1.2.3 From f5f9454c2145fa018c9808597739abce67114ac7 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Tue, 4 Dec 2012 13:59:12 -0600 Subject: staging: drm/omap: use omapdss low level API This patch changes the omapdrm KMS to bypass the omapdss "compat" layer and use the core omapdss API directly. This solves some layering issues that would cause unpin confusion vs GO bit status, because we would not know whether a particular pageflip or overlay update has hit the screen or not. Now instead we explicitly manage the GO bits in dispc and handle the vblank/framedone interrupts ourself so that we always know which buffers are being scanned out at any given time, and so on. As an added bonus, we no longer leave the last overlay buffer pinned when the display is disabled, and have been able to add the previously missing vblank event handling. v1: original v2: rebased on latest staging-next and omapdss patches from Tomi and review comments from Archit Taneja Signed-off-by: Rob Clark Reviewed-by: Archit Taneja Reviewed-by: Sumit Semwal Signed-off-by: Greg Kroah-Hartman --- drivers/staging/omapdrm/Makefile | 1 + drivers/staging/omapdrm/TODO | 3 - drivers/staging/omapdrm/omap_connector.c | 111 +------ drivers/staging/omapdrm/omap_crtc.c | 507 +++++++++++++++++++++++++++---- drivers/staging/omapdrm/omap_drv.c | 439 +++++--------------------- drivers/staging/omapdrm/omap_drv.h | 140 +++++++-- drivers/staging/omapdrm/omap_encoder.c | 132 ++++---- drivers/staging/omapdrm/omap_irq.c | 322 ++++++++++++++++++++ drivers/staging/omapdrm/omap_plane.c | 452 +++++++++++---------------- 9 files changed, 1214 insertions(+), 893 deletions(-) create mode 100644 drivers/staging/omapdrm/omap_irq.c diff --git a/drivers/staging/omapdrm/Makefile b/drivers/staging/omapdrm/Makefile index 1ca0e0016de..d85e058f284 100644 --- a/drivers/staging/omapdrm/Makefile +++ b/drivers/staging/omapdrm/Makefile @@ -5,6 +5,7 @@ ccflags-y := -Iinclude/drm -Werror omapdrm-y := omap_drv.o \ + omap_irq.o \ omap_debugfs.o \ omap_crtc.o \ omap_plane.o \ diff --git a/drivers/staging/omapdrm/TODO b/drivers/staging/omapdrm/TODO index 938c7888ca3..abeeb00aaa1 100644 --- a/drivers/staging/omapdrm/TODO +++ b/drivers/staging/omapdrm/TODO @@ -17,9 +17,6 @@ TODO . Revisit GEM sync object infrastructure.. TTM has some framework for this already. Possibly this could be refactored out and made more common? There should be some way to do this with less wheel-reinvention. -. Review DSS vs KMS mismatches. The omap_dss_device is sort of part encoder, - part connector. Which results in a bit of duct tape to fwd calls from - encoder to connector. Possibly this could be done a bit better. . Solve PM sequencing on resume. DMM/TILER must be reloaded before any access is made from any component in the system. Which means on suspend CRTC's should be disabled, and on resume the LUT should be reprogrammed diff --git a/drivers/staging/omapdrm/omap_connector.c b/drivers/staging/omapdrm/omap_connector.c index 91edb3f9697..4cc9ee733c5 100644 --- a/drivers/staging/omapdrm/omap_connector.c +++ b/drivers/staging/omapdrm/omap_connector.c @@ -31,9 +31,10 @@ struct omap_connector { struct drm_connector base; struct omap_dss_device *dssdev; + struct drm_encoder *encoder; }; -static inline void copy_timings_omap_to_drm(struct drm_display_mode *mode, +void copy_timings_omap_to_drm(struct drm_display_mode *mode, struct omap_video_timings *timings) { mode->clock = timings->pixel_clock; @@ -64,7 +65,7 @@ static inline void copy_timings_omap_to_drm(struct drm_display_mode *mode, mode->flags |= DRM_MODE_FLAG_NVSYNC; } -static inline void copy_timings_drm_to_omap(struct omap_video_timings *timings, +void copy_timings_drm_to_omap(struct omap_video_timings *timings, struct drm_display_mode *mode) { timings->pixel_clock = mode->clock; @@ -96,48 +97,7 @@ static inline void copy_timings_drm_to_omap(struct omap_video_timings *timings, timings->sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES; } -static void omap_connector_dpms(struct drm_connector *connector, int mode) -{ - struct omap_connector *omap_connector = to_omap_connector(connector); - struct omap_dss_device *dssdev = omap_connector->dssdev; - int old_dpms; - - DBG("%s: %d", dssdev->name, mode); - - old_dpms = connector->dpms; - - /* from off to on, do from crtc to connector */ - if (mode < old_dpms) - drm_helper_connector_dpms(connector, mode); - - if (mode == DRM_MODE_DPMS_ON) { - /* store resume info for suspended displays */ - switch (dssdev->state) { - case OMAP_DSS_DISPLAY_SUSPENDED: - dssdev->activate_after_resume = true; - break; - case OMAP_DSS_DISPLAY_DISABLED: { - int ret = dssdev->driver->enable(dssdev); - if (ret) { - DBG("%s: failed to enable: %d", - dssdev->name, ret); - dssdev->driver->disable(dssdev); - } - break; - } - default: - break; - } - } else { - /* TODO */ - } - - /* from on to off, do from connector to crtc */ - if (mode > old_dpms) - drm_helper_connector_dpms(connector, mode); -} - -enum drm_connector_status omap_connector_detect( +static enum drm_connector_status omap_connector_detect( struct drm_connector *connector, bool force) { struct omap_connector *omap_connector = to_omap_connector(connector); @@ -164,8 +124,6 @@ static void omap_connector_destroy(struct drm_connector *connector) struct omap_connector *omap_connector = to_omap_connector(connector); struct omap_dss_device *dssdev = omap_connector->dssdev; - dssdev->driver->disable(dssdev); - DBG("%s", omap_connector->dssdev->name); drm_sysfs_connector_remove(connector); drm_connector_cleanup(connector); @@ -261,36 +219,12 @@ static int omap_connector_mode_valid(struct drm_connector *connector, struct drm_encoder *omap_connector_attached_encoder( struct drm_connector *connector) { - int i; struct omap_connector *omap_connector = to_omap_connector(connector); - - for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) { - struct drm_mode_object *obj; - - if (connector->encoder_ids[i] == 0) - break; - - obj = drm_mode_object_find(connector->dev, - connector->encoder_ids[i], - DRM_MODE_OBJECT_ENCODER); - - if (obj) { - struct drm_encoder *encoder = obj_to_encoder(obj); - struct omap_overlay_manager *mgr = - omap_encoder_get_manager(encoder); - DBG("%s: found %s", omap_connector->dssdev->name, - mgr->name); - return encoder; - } - } - - DBG("%s: no encoder", omap_connector->dssdev->name); - - return NULL; + return omap_connector->encoder; } static const struct drm_connector_funcs omap_connector_funcs = { - .dpms = omap_connector_dpms, + .dpms = drm_helper_connector_dpms, .detect = omap_connector_detect, .fill_modes = drm_helper_probe_single_connector_modes, .destroy = omap_connector_destroy, @@ -302,34 +236,6 @@ static const struct drm_connector_helper_funcs omap_connector_helper_funcs = { .best_encoder = omap_connector_attached_encoder, }; -/* called from encoder when mode is set, to propagate settings to the dssdev */ -void omap_connector_mode_set(struct drm_connector *connector, - struct drm_display_mode *mode) -{ - struct drm_device *dev = connector->dev; - struct omap_connector *omap_connector = to_omap_connector(connector); - struct omap_dss_device *dssdev = omap_connector->dssdev; - struct omap_dss_driver *dssdrv = dssdev->driver; - struct omap_video_timings timings = {0}; - - copy_timings_drm_to_omap(&timings, mode); - - DBG("%s: set mode: %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x", - omap_connector->dssdev->name, - mode->base.id, mode->name, mode->vrefresh, mode->clock, - mode->hdisplay, mode->hsync_start, - mode->hsync_end, mode->htotal, - mode->vdisplay, mode->vsync_start, - mode->vsync_end, mode->vtotal, mode->type, mode->flags); - - if (dssdrv->check_timings(dssdev, &timings)) { - dev_err(dev->dev, "could not set timings\n"); - return; - } - - dssdrv->set_timings(dssdev, &timings); -} - /* flush an area of the framebuffer (in case of manual update display that * is not automatically flushed) */ @@ -344,7 +250,8 @@ void omap_connector_flush(struct drm_connector *connector, /* initialize connector */ struct drm_connector *omap_connector_init(struct drm_device *dev, - int connector_type, struct omap_dss_device *dssdev) + int connector_type, struct omap_dss_device *dssdev, + struct drm_encoder *encoder) { struct drm_connector *connector = NULL; struct omap_connector *omap_connector; @@ -360,6 +267,8 @@ struct drm_connector *omap_connector_init(struct drm_device *dev, } omap_connector->dssdev = dssdev; + omap_connector->encoder = encoder; + connector = &omap_connector->base; drm_connector_init(dev, connector, &omap_connector_funcs, diff --git a/drivers/staging/omapdrm/omap_crtc.c b/drivers/staging/omapdrm/omap_crtc.c index d87bd84257b..5c6ed6040ef 100644 --- a/drivers/staging/omapdrm/omap_crtc.c +++ b/drivers/staging/omapdrm/omap_crtc.c @@ -28,19 +28,131 @@ struct omap_crtc { struct drm_crtc base; struct drm_plane *plane; + const char *name; - int id; + int pipe; + enum omap_channel channel; + struct omap_overlay_manager_info info; + + /* + * Temporary: eventually this will go away, but it is needed + * for now to keep the output's happy. (They only need + * mgr->id.) Eventually this will be replaced w/ something + * more common-panel-framework-y + */ + struct omap_overlay_manager mgr; + + struct omap_video_timings timings; + bool enabled; + bool full_update; + + struct omap_drm_apply apply; + + struct omap_drm_irq apply_irq; + struct omap_drm_irq error_irq; + + /* list of in-progress apply's: */ + struct list_head pending_applies; + + /* list of queued apply's: */ + struct list_head queued_applies; + + /* for handling queued and in-progress applies: */ + struct work_struct apply_work; /* if there is a pending flip, these will be non-null: */ struct drm_pending_vblank_event *event; struct drm_framebuffer *old_fb; + + /* for handling page flips without caring about what + * the callback is called from. Possibly we should just + * make omap_gem always call the cb from the worker so + * we don't have to care about this.. + * + * XXX maybe fold into apply_work?? + */ + struct work_struct page_flip_work; +}; + +/* + * Manager-ops, callbacks from output when they need to configure + * the upstream part of the video pipe. + * + * Most of these we can ignore until we add support for command-mode + * panels.. for video-mode the crtc-helpers already do an adequate + * job of sequencing the setup of the video pipe in the proper order + */ + +/* we can probably ignore these until we support command-mode panels: */ +static void omap_crtc_start_update(struct omap_overlay_manager *mgr) +{ +} + +static int omap_crtc_enable(struct omap_overlay_manager *mgr) +{ + return 0; +} + +static void omap_crtc_disable(struct omap_overlay_manager *mgr) +{ +} + +static void omap_crtc_set_timings(struct omap_overlay_manager *mgr, + const struct omap_video_timings *timings) +{ + struct omap_crtc *omap_crtc = container_of(mgr, struct omap_crtc, mgr); + DBG("%s", omap_crtc->name); + omap_crtc->timings = *timings; + omap_crtc->full_update = true; +} + +static void omap_crtc_set_lcd_config(struct omap_overlay_manager *mgr, + const struct dss_lcd_mgr_config *config) +{ + struct omap_crtc *omap_crtc = container_of(mgr, struct omap_crtc, mgr); + DBG("%s", omap_crtc->name); + dispc_mgr_set_lcd_config(omap_crtc->channel, config); +} + +static int omap_crtc_register_framedone_handler( + struct omap_overlay_manager *mgr, + void (*handler)(void *), void *data) +{ + return 0; +} + +static void omap_crtc_unregister_framedone_handler( + struct omap_overlay_manager *mgr, + void (*handler)(void *), void *data) +{ +} + +static const struct dss_mgr_ops mgr_ops = { + .start_update = omap_crtc_start_update, + .enable = omap_crtc_enable, + .disable = omap_crtc_disable, + .set_timings = omap_crtc_set_timings, + .set_lcd_config = omap_crtc_set_lcd_config, + .register_framedone_handler = omap_crtc_register_framedone_handler, + .unregister_framedone_handler = omap_crtc_unregister_framedone_handler, }; +/* + * CRTC funcs: + */ + static void omap_crtc_destroy(struct drm_crtc *crtc) { struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + + DBG("%s", omap_crtc->name); + + WARN_ON(omap_crtc->apply_irq.registered); + omap_irq_unregister(crtc->dev, &omap_crtc->error_irq); + omap_crtc->plane->funcs->destroy(omap_crtc->plane); drm_crtc_cleanup(crtc); + kfree(omap_crtc); } @@ -48,14 +160,25 @@ static void omap_crtc_dpms(struct drm_crtc *crtc, int mode) { struct omap_drm_private *priv = crtc->dev->dev_private; struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + bool enabled = (mode == DRM_MODE_DPMS_ON); int i; - WARN_ON(omap_plane_dpms(omap_crtc->plane, mode)); + DBG("%s: %d", omap_crtc->name, mode); + + if (enabled != omap_crtc->enabled) { + omap_crtc->enabled = enabled; + omap_crtc->full_update = true; + omap_crtc_apply(crtc, &omap_crtc->apply); - for (i = 0; i < priv->num_planes; i++) { - struct drm_plane *plane = priv->planes[i]; - if (plane->crtc == crtc) - WARN_ON(omap_plane_dpms(plane, mode)); + /* also enable our private plane: */ + WARN_ON(omap_plane_dpms(omap_crtc->plane, mode)); + + /* and any attached overlay planes: */ + for (i = 0; i < priv->num_planes; i++) { + struct drm_plane *plane = priv->planes[i]; + if (plane->crtc == crtc) + WARN_ON(omap_plane_dpms(plane, mode)); + } } } @@ -73,12 +196,26 @@ static int omap_crtc_mode_set(struct drm_crtc *crtc, struct drm_framebuffer *old_fb) { struct omap_crtc *omap_crtc = to_omap_crtc(crtc); - struct drm_plane *plane = omap_crtc->plane; - return omap_plane_mode_set(plane, crtc, crtc->fb, + mode = adjusted_mode; + + DBG("%s: set mode: %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x", + omap_crtc->name, mode->base.id, mode->name, + mode->vrefresh, mode->clock, + mode->hdisplay, mode->hsync_start, + mode->hsync_end, mode->htotal, + mode->vdisplay, mode->vsync_start, + mode->vsync_end, mode->vtotal, + mode->type, mode->flags); + + copy_timings_drm_to_omap(&omap_crtc->timings, mode); + omap_crtc->full_update = true; + + return omap_plane_mode_set(omap_crtc->plane, crtc, crtc->fb, 0, 0, mode->hdisplay, mode->vdisplay, x << 16, y << 16, - mode->hdisplay << 16, mode->vdisplay << 16); + mode->hdisplay << 16, mode->vdisplay << 16, + NULL, NULL); } static void omap_crtc_prepare(struct drm_crtc *crtc) @@ -102,10 +239,11 @@ static int omap_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, struct drm_plane *plane = omap_crtc->plane; struct drm_display_mode *mode = &crtc->mode; - return plane->funcs->update_plane(plane, crtc, crtc->fb, + return omap_plane_mode_set(plane, crtc, crtc->fb, 0, 0, mode->hdisplay, mode->vdisplay, x << 16, y << 16, - mode->hdisplay << 16, mode->vdisplay << 16); + mode->hdisplay << 16, mode->vdisplay << 16, + NULL, NULL); } static void omap_crtc_load_lut(struct drm_crtc *crtc) @@ -114,63 +252,54 @@ static void omap_crtc_load_lut(struct drm_crtc *crtc) static void vblank_cb(void *arg) { - static uint32_t sequence; struct drm_crtc *crtc = arg; struct drm_device *dev = crtc->dev; struct omap_crtc *omap_crtc = to_omap_crtc(crtc); - struct drm_pending_vblank_event *event = omap_crtc->event; unsigned long flags; - struct timeval now; - WARN_ON(!event); + spin_lock_irqsave(&dev->event_lock, flags); + + /* wakeup userspace */ + if (omap_crtc->event) + drm_send_vblank_event(dev, omap_crtc->pipe, omap_crtc->event); omap_crtc->event = NULL; + omap_crtc->old_fb = NULL; - /* wakeup userspace */ - if (event) { - do_gettimeofday(&now); - - spin_lock_irqsave(&dev->event_lock, flags); - /* TODO: we can't yet use the vblank time accounting, - * because omapdss lower layer is the one that knows - * the irq # and registers the handler, which more or - * less defeats how drm_irq works.. for now just fake - * the sequence number and use gettimeofday.. - * - event->event.sequence = drm_vblank_count_and_time( - dev, omap_crtc->id, &now); - */ - event->event.sequence = sequence++; - event->event.tv_sec = now.tv_sec; - event->event.tv_usec = now.tv_usec; - list_add_tail(&event->base.link, - &event->base.file_priv->event_list); - wake_up_interruptible(&event->base.file_priv->event_wait); - spin_unlock_irqrestore(&dev->event_lock, flags); - } + spin_unlock_irqrestore(&dev->event_lock, flags); } -static void page_flip_cb(void *arg) +static void page_flip_worker(struct work_struct *work) { - struct drm_crtc *crtc = arg; - struct omap_crtc *omap_crtc = to_omap_crtc(crtc); - struct drm_framebuffer *old_fb = omap_crtc->old_fb; + struct omap_crtc *omap_crtc = + container_of(work, struct omap_crtc, page_flip_work); + struct drm_crtc *crtc = &omap_crtc->base; + struct drm_device *dev = crtc->dev; + struct drm_display_mode *mode = &crtc->mode; struct drm_gem_object *bo; - omap_crtc->old_fb = NULL; - - omap_crtc_mode_set_base(crtc, crtc->x, crtc->y, old_fb); - - /* really we'd like to setup the callback atomically w/ setting the - * new scanout buffer to avoid getting stuck waiting an extra vblank - * cycle.. for now go for correctness and later figure out speed.. - */ - omap_plane_on_endwin(omap_crtc->plane, vblank_cb, crtc); + mutex_lock(&dev->mode_config.mutex); + omap_plane_mode_set(omap_crtc->plane, crtc, crtc->fb, + 0, 0, mode->hdisplay, mode->vdisplay, + crtc->x << 16, crtc->y << 16, + mode->hdisplay << 16, mode->vdisplay << 16, + vblank_cb, crtc); + mutex_unlock(&dev->mode_config.mutex); bo = omap_framebuffer_bo(crtc->fb, 0); drm_gem_object_unreference_unlocked(bo); } +static void page_flip_cb(void *arg) +{ + struct drm_crtc *crtc = arg; + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + struct omap_drm_private *priv = crtc->dev->dev_private; + + /* avoid assumptions about what ctxt we are called from: */ + queue_work(priv->wq, &omap_crtc->page_flip_work); +} + static int omap_crtc_page_flip_locked(struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_pending_vblank_event *event) @@ -179,14 +308,14 @@ static int omap_crtc_page_flip_locked(struct drm_crtc *crtc, struct omap_crtc *omap_crtc = to_omap_crtc(crtc); struct drm_gem_object *bo; - DBG("%d -> %d", crtc->fb ? crtc->fb->base.id : -1, fb->base.id); + DBG("%d -> %d (event=%p)", crtc->fb ? crtc->fb->base.id : -1, + fb->base.id, event); - if (omap_crtc->event) { + if (omap_crtc->old_fb) { dev_err(dev->dev, "already a pending flip\n"); return -EINVAL; } - omap_crtc->old_fb = crtc->fb; omap_crtc->event = event; crtc->fb = fb; @@ -234,14 +363,244 @@ static const struct drm_crtc_helper_funcs omap_crtc_helper_funcs = { .load_lut = omap_crtc_load_lut, }; +const struct omap_video_timings *omap_crtc_timings(struct drm_crtc *crtc) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + return &omap_crtc->timings; +} + +enum omap_channel omap_crtc_channel(struct drm_crtc *crtc) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + return omap_crtc->channel; +} + +static void omap_crtc_error_irq(struct omap_drm_irq *irq, uint32_t irqstatus) +{ + struct omap_crtc *omap_crtc = + container_of(irq, struct omap_crtc, error_irq); + struct drm_crtc *crtc = &omap_crtc->base; + DRM_ERROR("%s: errors: %08x\n", omap_crtc->name, irqstatus); + /* avoid getting in a flood, unregister the irq until next vblank */ + omap_irq_unregister(crtc->dev, &omap_crtc->error_irq); +} + +static void omap_crtc_apply_irq(struct omap_drm_irq *irq, uint32_t irqstatus) +{ + struct omap_crtc *omap_crtc = + container_of(irq, struct omap_crtc, apply_irq); + struct drm_crtc *crtc = &omap_crtc->base; + + if (!omap_crtc->error_irq.registered) + omap_irq_register(crtc->dev, &omap_crtc->error_irq); + + if (!dispc_mgr_go_busy(omap_crtc->channel)) { + struct omap_drm_private *priv = + crtc->dev->dev_private; + DBG("%s: apply done", omap_crtc->name); + omap_irq_unregister(crtc->dev, &omap_crtc->apply_irq); + queue_work(priv->wq, &omap_crtc->apply_work); + } +} + +static void apply_worker(struct work_struct *work) +{ + struct omap_crtc *omap_crtc = + container_of(work, struct omap_crtc, apply_work); + struct drm_crtc *crtc = &omap_crtc->base; + struct drm_device *dev = crtc->dev; + struct omap_drm_apply *apply, *n; + bool need_apply; + + /* + * Synchronize everything on mode_config.mutex, to keep + * the callbacks and list modification all serialized + * with respect to modesetting ioctls from userspace. + */ + mutex_lock(&dev->mode_config.mutex); + dispc_runtime_get(); + + /* + * If we are still pending a previous update, wait.. when the + * pending update completes, we get kicked again. + */ + if (omap_crtc->apply_irq.registered) + goto out; + + /* finish up previous apply's: */ + list_for_each_entry_safe(apply, n, + &omap_crtc->pending_applies, pending_node) { + apply->post_apply(apply); + list_del(&apply->pending_node); + } + + need_apply = !list_empty(&omap_crtc->queued_applies); + + /* then handle the next round of of queued apply's: */ + list_for_each_entry_safe(apply, n, + &omap_crtc->queued_applies, queued_node) { + apply->pre_apply(apply); + list_del(&apply->queued_node); + apply->queued = false; + list_add_tail(&apply->pending_node, + &omap_crtc->pending_applies); + } + + if (need_apply) { + enum omap_channel channel = omap_crtc->channel; + + DBG("%s: GO", omap_crtc->name); + + if (dispc_mgr_is_enabled(channel)) { + omap_irq_register(dev, &omap_crtc->apply_irq); + dispc_mgr_go(channel); + } else { + struct omap_drm_private *priv = dev->dev_private; + queue_work(priv->wq, &omap_crtc->apply_work); + } + } + +out: + dispc_runtime_put(); + mutex_unlock(&dev->mode_config.mutex); +} + +int omap_crtc_apply(struct drm_crtc *crtc, + struct omap_drm_apply *apply) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + struct drm_device *dev = crtc->dev; + + WARN_ON(!mutex_is_locked(&dev->mode_config.mutex)); + + /* no need to queue it again if it is already queued: */ + if (apply->queued) + return 0; + + apply->queued = true; + list_add_tail(&apply->queued_node, &omap_crtc->queued_applies); + + /* + * If there are no currently pending updates, then go ahead and + * kick the worker immediately, otherwise it will run again when + * the current update finishes. + */ + if (list_empty(&omap_crtc->pending_applies)) { + struct omap_drm_private *priv = crtc->dev->dev_private; + queue_work(priv->wq, &omap_crtc->apply_work); + } + + return 0; +} + +/* called only from apply */ +static void set_enabled(struct drm_crtc *crtc, bool enable) +{ + struct drm_device *dev = crtc->dev; + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + enum omap_channel channel = omap_crtc->channel; + struct omap_irq_wait *wait = NULL; + + if (dispc_mgr_is_enabled(channel) == enable) + return; + + /* ignore sync-lost irqs during enable/disable */ + omap_irq_unregister(crtc->dev, &omap_crtc->error_irq); + + if (dispc_mgr_get_framedone_irq(channel)) { + if (!enable) { + wait = omap_irq_wait_init(dev, + dispc_mgr_get_framedone_irq(channel), 1); + } + } else { + /* + * When we disable digit output, we need to wait until fields + * are done. Otherwise the DSS is still working, and turning + * off the clocks prevents DSS from going to OFF mode. And when + * enabling, we need to wait for the extra sync losts + */ + wait = omap_irq_wait_init(dev, + dispc_mgr_get_vsync_irq(channel), 2); + } + + dispc_mgr_enable(channel, enable); + + if (wait) { + int ret = omap_irq_wait(dev, wait, msecs_to_jiffies(100)); + if (ret) { + dev_err(dev->dev, "%s: timeout waiting for %s\n", + omap_crtc->name, enable ? "enable" : "disable"); + } + } + + omap_irq_register(crtc->dev, &omap_crtc->error_irq); +} + +static void omap_crtc_pre_apply(struct omap_drm_apply *apply) +{ + struct omap_crtc *omap_crtc = + container_of(apply, struct omap_crtc, apply); + struct drm_crtc *crtc = &omap_crtc->base; + struct drm_encoder *encoder = NULL; + + DBG("%s: enabled=%d, full=%d", omap_crtc->name, + omap_crtc->enabled, omap_crtc->full_update); + + if (omap_crtc->full_update) { + struct omap_drm_private *priv = crtc->dev->dev_private; + int i; + for (i = 0; i < priv->num_encoders; i++) { + if (priv->encoders[i]->crtc == crtc) { + encoder = priv->encoders[i]; + break; + } + } + } + + if (!omap_crtc->enabled) { + set_enabled(&omap_crtc->base, false); + if (encoder) + omap_encoder_set_enabled(encoder, false); + } else { + if (encoder) { + omap_encoder_set_enabled(encoder, false); + omap_encoder_update(encoder, &omap_crtc->mgr, + &omap_crtc->timings); + omap_encoder_set_enabled(encoder, true); + omap_crtc->full_update = false; + } + + dispc_mgr_setup(omap_crtc->channel, &omap_crtc->info); + dispc_mgr_set_timings(omap_crtc->channel, + &omap_crtc->timings); + set_enabled(&omap_crtc->base, true); + } + + omap_crtc->full_update = false; +} + +static void omap_crtc_post_apply(struct omap_drm_apply *apply) +{ + /* nothing needed for post-apply */ +} + +static const char *channel_names[] = { + [OMAP_DSS_CHANNEL_LCD] = "lcd", + [OMAP_DSS_CHANNEL_DIGIT] = "tv", + [OMAP_DSS_CHANNEL_LCD2] = "lcd2", +}; + /* initialize crtc */ struct drm_crtc *omap_crtc_init(struct drm_device *dev, - struct omap_overlay *ovl, int id) + struct drm_plane *plane, enum omap_channel channel, int id) { struct drm_crtc *crtc = NULL; - struct omap_crtc *omap_crtc = kzalloc(sizeof(*omap_crtc), GFP_KERNEL); + struct omap_crtc *omap_crtc; + struct omap_overlay_manager_info *info; + + DBG("%s", channel_names[channel]); - DBG("%s", ovl->name); + omap_crtc = kzalloc(sizeof(*omap_crtc), GFP_KERNEL); if (!omap_crtc) { dev_err(dev->dev, "could not allocate CRTC\n"); @@ -250,10 +609,40 @@ struct drm_crtc *omap_crtc_init(struct drm_device *dev, crtc = &omap_crtc->base; - omap_crtc->plane = omap_plane_init(dev, ovl, (1 << id), true); + INIT_WORK(&omap_crtc->page_flip_work, page_flip_worker); + INIT_WORK(&omap_crtc->apply_work, apply_worker); + + INIT_LIST_HEAD(&omap_crtc->pending_applies); + INIT_LIST_HEAD(&omap_crtc->queued_applies); + + omap_crtc->apply.pre_apply = omap_crtc_pre_apply; + omap_crtc->apply.post_apply = omap_crtc_post_apply; + + omap_crtc->apply_irq.irqmask = pipe2vbl(id); + omap_crtc->apply_irq.irq = omap_crtc_apply_irq; + + omap_crtc->error_irq.irqmask = + dispc_mgr_get_sync_lost_irq(channel); + omap_crtc->error_irq.irq = omap_crtc_error_irq; + omap_irq_register(dev, &omap_crtc->error_irq); + + omap_crtc->channel = channel; + omap_crtc->plane = plane; omap_crtc->plane->crtc = crtc; - omap_crtc->name = ovl->name; - omap_crtc->id = id; + omap_crtc->name = channel_names[channel]; + omap_crtc->pipe = id; + + /* temporary: */ + omap_crtc->mgr.id = channel; + + dss_install_mgr_ops(&mgr_ops); + + /* TODO: fix hard-coded setup.. add properties! */ + info = &omap_crtc->info; + info->default_color = 0x00000000; + info->trans_key = 0x00000000; + info->trans_key_type = OMAP_DSS_COLOR_KEY_GFX_DST; + info->trans_enabled = false; drm_crtc_init(dev, crtc, &omap_crtc_funcs); drm_crtc_helper_add(crtc, &omap_crtc_helper_funcs); diff --git a/drivers/staging/omapdrm/omap_drv.c b/drivers/staging/omapdrm/omap_drv.c index 84943e5ba1d..ae5ecc2efbc 100644 --- a/drivers/staging/omapdrm/omap_drv.c +++ b/drivers/staging/omapdrm/omap_drv.c @@ -74,320 +74,99 @@ static int get_connector_type(struct omap_dss_device *dssdev) } } -#if 0 /* enable when dss2 supports hotplug */ -static int omap_drm_notifier(struct notifier_block *nb, - unsigned long evt, void *arg) -{ - switch (evt) { - case OMAP_DSS_SIZE_CHANGE: - case OMAP_DSS_HOTPLUG_CONNECT: - case OMAP_DSS_HOTPLUG_DISCONNECT: { - struct drm_device *dev = drm_device; - DBG("hotplug event: evt=%d, dev=%p", evt, dev); - if (dev) - drm_sysfs_hotplug_event(dev); - - return NOTIFY_OK; - } - default: /* don't care about other events for now */ - return NOTIFY_DONE; - } -} -#endif - -static void dump_video_chains(void) -{ - int i; - - DBG("dumping video chains: "); - for (i = 0; i < omap_dss_get_num_overlays(); i++) { - struct omap_overlay *ovl = omap_dss_get_overlay(i); - struct omap_overlay_manager *mgr = ovl->manager; - struct omap_dss_device *dssdev = mgr ? - mgr->get_device(mgr) : NULL; - if (dssdev) { - DBG("%d: %s -> %s -> %s", i, ovl->name, mgr->name, - dssdev->name); - } else if (mgr) { - DBG("%d: %s -> %s", i, ovl->name, mgr->name); - } else { - DBG("%d: %s", i, ovl->name); - } - } -} - -/* create encoders for each manager */ -static int create_encoder(struct drm_device *dev, - struct omap_overlay_manager *mgr) -{ - struct omap_drm_private *priv = dev->dev_private; - struct drm_encoder *encoder = omap_encoder_init(dev, mgr); - - if (!encoder) { - dev_err(dev->dev, "could not create encoder: %s\n", - mgr->name); - return -ENOMEM; - } - - BUG_ON(priv->num_encoders >= ARRAY_SIZE(priv->encoders)); - - priv->encoders[priv->num_encoders++] = encoder; - - return 0; -} - -/* create connectors for each display device */ -static int create_connector(struct drm_device *dev, - struct omap_dss_device *dssdev) +static int omap_modeset_init(struct drm_device *dev) { struct omap_drm_private *priv = dev->dev_private; - static struct notifier_block *notifier; - struct drm_connector *connector; - int j; - - if (!dssdev->driver) { - dev_warn(dev->dev, "%s has no driver.. skipping it\n", - dssdev->name); - return 0; - } + struct omap_dss_device *dssdev = NULL; + int num_ovls = dss_feat_get_num_ovls(); + int id; - if (!(dssdev->driver->get_timings || - dssdev->driver->read_edid)) { - dev_warn(dev->dev, "%s driver does not support " - "get_timings or read_edid.. skipping it!\n", - dssdev->name); - return 0; - } + drm_mode_config_init(dev); - connector = omap_connector_init(dev, - get_connector_type(dssdev), dssdev); + omap_drm_irq_install(dev); - if (!connector) { - dev_err(dev->dev, "could not create connector: %s\n", - dssdev->name); - return -ENOMEM; - } - - BUG_ON(priv->num_connectors >= ARRAY_SIZE(priv->connectors)); + /* + * Create private planes and CRTCs for the last NUM_CRTCs overlay + * plus manager: + */ + for (id = 0; id < min(num_crtc, num_ovls); id++) { + struct drm_plane *plane; + struct drm_crtc *crtc; - priv->connectors[priv->num_connectors++] = connector; + plane = omap_plane_init(dev, id, true); + crtc = omap_crtc_init(dev, plane, pipe2chan(id), id); -#if 0 /* enable when dss2 supports hotplug */ - notifier = kzalloc(sizeof(struct notifier_block), GFP_KERNEL); - notifier->notifier_call = omap_drm_notifier; - omap_dss_add_notify(dssdev, notifier); -#else - notifier = NULL; -#endif + BUG_ON(priv->num_crtcs >= ARRAY_SIZE(priv->crtcs)); + priv->crtcs[id] = crtc; + priv->num_crtcs++; - for (j = 0; j < priv->num_encoders; j++) { - struct omap_overlay_manager *mgr = - omap_encoder_get_manager(priv->encoders[j]); - if (mgr->get_device(mgr) == dssdev) { - drm_mode_connector_attach_encoder(connector, - priv->encoders[j]); - } + priv->planes[id] = plane; + priv->num_planes++; } - return 0; -} - -/* create up to max_overlays CRTCs mapping to overlays.. by default, - * connect the overlays to different managers/encoders, giving priority - * to encoders connected to connectors with a detected connection - */ -static int create_crtc(struct drm_device *dev, struct omap_overlay *ovl, - int *j, unsigned int connected_connectors) -{ - struct omap_drm_private *priv = dev->dev_private; - struct omap_overlay_manager *mgr = NULL; - struct drm_crtc *crtc; - - /* find next best connector, ones with detected connection first + /* + * Create normal planes for the remaining overlays: */ - while (*j < priv->num_connectors && !mgr) { - if (connected_connectors & (1 << *j)) { - struct drm_encoder *encoder = - omap_connector_attached_encoder( - priv->connectors[*j]); - if (encoder) - mgr = omap_encoder_get_manager(encoder); + for (; id < num_ovls; id++) { + struct drm_plane *plane = omap_plane_init(dev, id, false); - } - (*j)++; + BUG_ON(priv->num_planes >= ARRAY_SIZE(priv->planes)); + priv->planes[priv->num_planes++] = plane; } - /* if we couldn't find another connected connector, lets start - * looking at the unconnected connectors: - * - * note: it might not be immediately apparent, but thanks to - * the !mgr check in both this loop and the one above, the only - * way to enter this loop is with *j == priv->num_connectors, - * so idx can never go negative. - */ - while (*j < 2 * priv->num_connectors && !mgr) { - int idx = *j - priv->num_connectors; - if (!(connected_connectors & (1 << idx))) { - struct drm_encoder *encoder = - omap_connector_attached_encoder( - priv->connectors[idx]); - if (encoder) - mgr = omap_encoder_get_manager(encoder); + for_each_dss_dev(dssdev) { + struct drm_connector *connector; + struct drm_encoder *encoder; + if (!dssdev->driver) { + dev_warn(dev->dev, "%s has no driver.. skipping it\n", + dssdev->name); + return 0; } - (*j)++; - } - - crtc = omap_crtc_init(dev, ovl, priv->num_crtcs); - - if (!crtc) { - dev_err(dev->dev, "could not create CRTC: %s\n", - ovl->name); - return -ENOMEM; - } - BUG_ON(priv->num_crtcs >= ARRAY_SIZE(priv->crtcs)); - - priv->crtcs[priv->num_crtcs++] = crtc; - - return 0; -} - -static int create_plane(struct drm_device *dev, struct omap_overlay *ovl, - unsigned int possible_crtcs) -{ - struct omap_drm_private *priv = dev->dev_private; - struct drm_plane *plane = - omap_plane_init(dev, ovl, possible_crtcs, false); - - if (!plane) { - dev_err(dev->dev, "could not create plane: %s\n", - ovl->name); - return -ENOMEM; - } - - BUG_ON(priv->num_planes >= ARRAY_SIZE(priv->planes)); - - priv->planes[priv->num_planes++] = plane; - - return 0; -} - -static int match_dev_name(struct omap_dss_device *dssdev, void *data) -{ - return !strcmp(dssdev->name, data); -} - -static unsigned int detect_connectors(struct drm_device *dev) -{ - struct omap_drm_private *priv = dev->dev_private; - unsigned int connected_connectors = 0; - int i; - - for (i = 0; i < priv->num_connectors; i++) { - struct drm_connector *connector = priv->connectors[i]; - if (omap_connector_detect(connector, true) == - connector_status_connected) { - connected_connectors |= (1 << i); + if (!(dssdev->driver->get_timings || + dssdev->driver->read_edid)) { + dev_warn(dev->dev, "%s driver does not support " + "get_timings or read_edid.. skipping it!\n", + dssdev->name); + return 0; } - } - - return connected_connectors; -} -static int omap_modeset_init(struct drm_device *dev) -{ - const struct omap_drm_platform_data *pdata = dev->dev->platform_data; - struct omap_kms_platform_data *kms_pdata = NULL; - struct omap_drm_private *priv = dev->dev_private; - struct omap_dss_device *dssdev = NULL; - int i, j; - unsigned int connected_connectors = 0; + encoder = omap_encoder_init(dev, dssdev); - drm_mode_config_init(dev); - - if (pdata && pdata->kms_pdata) { - kms_pdata = pdata->kms_pdata; - - /* if platform data is provided by the board file, use it to - * control which overlays, managers, and devices we own. - */ - for (i = 0; i < kms_pdata->mgr_cnt; i++) { - struct omap_overlay_manager *mgr = - omap_dss_get_overlay_manager( - kms_pdata->mgr_ids[i]); - create_encoder(dev, mgr); - } - - for (i = 0; i < kms_pdata->dev_cnt; i++) { - struct omap_dss_device *dssdev = - omap_dss_find_device( - (void *)kms_pdata->dev_names[i], - match_dev_name); - if (!dssdev) { - dev_warn(dev->dev, "no such dssdev: %s\n", - kms_pdata->dev_names[i]); - continue; - } - create_connector(dev, dssdev); + if (!encoder) { + dev_err(dev->dev, "could not create encoder: %s\n", + dssdev->name); + return -ENOMEM; } - connected_connectors = detect_connectors(dev); + connector = omap_connector_init(dev, + get_connector_type(dssdev), dssdev, encoder); - j = 0; - for (i = 0; i < kms_pdata->ovl_cnt; i++) { - struct omap_overlay *ovl = - omap_dss_get_overlay(kms_pdata->ovl_ids[i]); - create_crtc(dev, ovl, &j, connected_connectors); + if (!connector) { + dev_err(dev->dev, "could not create connector: %s\n", + dssdev->name); + return -ENOMEM; } - for (i = 0; i < kms_pdata->pln_cnt; i++) { - struct omap_overlay *ovl = - omap_dss_get_overlay(kms_pdata->pln_ids[i]); - create_plane(dev, ovl, (1 << priv->num_crtcs) - 1); - } - } else { - /* otherwise just grab up to CONFIG_DRM_OMAP_NUM_CRTCS and try - * to make educated guesses about everything else - */ - int max_overlays = min(omap_dss_get_num_overlays(), num_crtc); + BUG_ON(priv->num_encoders >= ARRAY_SIZE(priv->encoders)); + BUG_ON(priv->num_connectors >= ARRAY_SIZE(priv->connectors)); - for (i = 0; i < omap_dss_get_num_overlay_managers(); i++) - create_encoder(dev, omap_dss_get_overlay_manager(i)); - - for_each_dss_dev(dssdev) { - create_connector(dev, dssdev); - } + priv->encoders[priv->num_encoders++] = encoder; + priv->connectors[priv->num_connectors++] = connector; - connected_connectors = detect_connectors(dev); + drm_mode_connector_attach_encoder(connector, encoder); - j = 0; - for (i = 0; i < max_overlays; i++) { - create_crtc(dev, omap_dss_get_overlay(i), - &j, connected_connectors); - } - - /* use any remaining overlays as drm planes */ - for (; i < omap_dss_get_num_overlays(); i++) { - struct omap_overlay *ovl = omap_dss_get_overlay(i); - create_plane(dev, ovl, (1 << priv->num_crtcs) - 1); + /* figure out which crtc's we can connect the encoder to: */ + encoder->possible_crtcs = 0; + for (id = 0; id < priv->num_crtcs; id++) { + enum omap_dss_output_id supported_outputs = + dss_feat_get_supported_outputs(pipe2chan(id)); + if (supported_outputs & dssdev->output->id) + encoder->possible_crtcs |= (1 << id); } } - /* for now keep the mapping of CRTCs and encoders static.. */ - for (i = 0; i < priv->num_encoders; i++) { - struct drm_encoder *encoder = priv->encoders[i]; - struct omap_overlay_manager *mgr = - omap_encoder_get_manager(encoder); - - encoder->possible_crtcs = (1 << priv->num_crtcs) - 1; - - DBG("%s: possible_crtcs=%08x", mgr->name, - encoder->possible_crtcs); - } - - dump_video_chains(); - dev->mode_config.min_width = 32; dev->mode_config.min_height = 32; @@ -450,7 +229,7 @@ static int ioctl_gem_new(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_omap_gem_new *args = data; - DBG("%p:%p: size=0x%08x, flags=%08x", dev, file_priv, + VERB("%p:%p: size=0x%08x, flags=%08x", dev, file_priv, args->size.bytes, args->flags); return omap_gem_new_handle(dev, file_priv, args->size, args->flags, &args->handle); @@ -510,7 +289,7 @@ static int ioctl_gem_info(struct drm_device *dev, void *data, struct drm_gem_object *obj; int ret = 0; - DBG("%p:%p: handle=%d", dev, file_priv, args->handle); + VERB("%p:%p: handle=%d", dev, file_priv, args->handle); obj = drm_gem_object_lookup(dev, file_priv, args->handle); if (!obj) @@ -565,14 +344,6 @@ static int dev_load(struct drm_device *dev, unsigned long flags) dev->dev_private = priv; - ret = omapdss_compat_init(); - if (ret) { - dev_err(dev->dev, "coult not init omapdss\n"); - dev->dev_private = NULL; - kfree(priv); - return ret; - } - priv->wq = alloc_ordered_workqueue("omapdrm", 0); INIT_LIST_HEAD(&priv->obj_list); @@ -584,10 +355,13 @@ static int dev_load(struct drm_device *dev, unsigned long flags) dev_err(dev->dev, "omap_modeset_init failed: ret=%d\n", ret); dev->dev_private = NULL; kfree(priv); - omapdss_compat_uninit(); return ret; } + ret = drm_vblank_init(dev, priv->num_crtcs); + if (ret) + dev_warn(dev->dev, "could not init vblank\n"); + priv->fbdev = omap_fbdev_init(dev); if (!priv->fbdev) { dev_warn(dev->dev, "omap_fbdev_init failed\n"); @@ -596,10 +370,6 @@ static int dev_load(struct drm_device *dev, unsigned long flags) drm_kms_helper_poll_init(dev); - ret = drm_vblank_init(dev, priv->num_crtcs); - if (ret) - dev_warn(dev->dev, "could not init vblank\n"); - return 0; } @@ -609,8 +379,9 @@ static int dev_unload(struct drm_device *dev) DBG("unload: dev=%p", dev); - drm_vblank_cleanup(dev); drm_kms_helper_poll_fini(dev); + drm_vblank_cleanup(dev); + omap_drm_irq_uninstall(dev); omap_fbdev_free(dev); omap_modeset_free(dev); @@ -619,8 +390,6 @@ static int dev_unload(struct drm_device *dev) flush_workqueue(priv->wq); destroy_workqueue(priv->wq); - omapdss_compat_uninit(); - kfree(dev->dev_private); dev->dev_private = NULL; @@ -680,7 +449,9 @@ static void dev_lastclose(struct drm_device *dev) } } + mutex_lock(&dev->mode_config.mutex); ret = drm_fb_helper_restore_fbdev_mode(priv->fbdev); + mutex_unlock(&dev->mode_config.mutex); if (ret) DBG("failed to restore crtc mode"); } @@ -695,60 +466,6 @@ static void dev_postclose(struct drm_device *dev, struct drm_file *file) DBG("postclose: dev=%p, file=%p", dev, file); } -/** - * enable_vblank - enable vblank interrupt events - * @dev: DRM device - * @crtc: which irq to enable - * - * Enable vblank interrupts for @crtc. If the device doesn't have - * a hardware vblank counter, this routine should be a no-op, since - * interrupts will have to stay on to keep the count accurate. - * - * RETURNS - * Zero on success, appropriate errno if the given @crtc's vblank - * interrupt cannot be enabled. - */ -static int dev_enable_vblank(struct drm_device *dev, int crtc) -{ - DBG("enable_vblank: dev=%p, crtc=%d", dev, crtc); - return 0; -} - -/** - * disable_vblank - disable vblank interrupt events - * @dev: DRM device - * @crtc: which irq to enable - * - * Disable vblank interrupts for @crtc. If the device doesn't have - * a hardware vblank counter, this routine should be a no-op, since - * interrupts will have to stay on to keep the count accurate. - */ -static void dev_disable_vblank(struct drm_device *dev, int crtc) -{ - DBG("disable_vblank: dev=%p, crtc=%d", dev, crtc); -} - -static irqreturn_t dev_irq_handler(DRM_IRQ_ARGS) -{ - return IRQ_HANDLED; -} - -static void dev_irq_preinstall(struct drm_device *dev) -{ - DBG("irq_preinstall: dev=%p", dev); -} - -static int dev_irq_postinstall(struct drm_device *dev) -{ - DBG("irq_postinstall: dev=%p", dev); - return 0; -} - -static void dev_irq_uninstall(struct drm_device *dev) -{ - DBG("irq_uninstall: dev=%p", dev); -} - static const struct vm_operations_struct omap_gem_vm_ops = { .fault = omap_gem_fault, .open = drm_gem_vm_open, @@ -778,12 +495,12 @@ static struct drm_driver omap_drm_driver = { .preclose = dev_preclose, .postclose = dev_postclose, .get_vblank_counter = drm_vblank_count, - .enable_vblank = dev_enable_vblank, - .disable_vblank = dev_disable_vblank, - .irq_preinstall = dev_irq_preinstall, - .irq_postinstall = dev_irq_postinstall, - .irq_uninstall = dev_irq_uninstall, - .irq_handler = dev_irq_handler, + .enable_vblank = omap_irq_enable_vblank, + .disable_vblank = omap_irq_disable_vblank, + .irq_preinstall = omap_irq_preinstall, + .irq_postinstall = omap_irq_postinstall, + .irq_uninstall = omap_irq_uninstall, + .irq_handler = omap_irq_handler, #ifdef CONFIG_DEBUG_FS .debugfs_init = omap_debugfs_init, .debugfs_cleanup = omap_debugfs_cleanup, diff --git a/drivers/staging/omapdrm/omap_drv.h b/drivers/staging/omapdrm/omap_drv.h index 1d4aea53b75..cd1f22b0b12 100644 --- a/drivers/staging/omapdrm/omap_drv.h +++ b/drivers/staging/omapdrm/omap_drv.h @@ -28,6 +28,7 @@ #include #include "omap_drm.h" + #define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__) #define VERB(fmt, ...) if (0) DRM_DEBUG(fmt, ##__VA_ARGS__) /* verbose debug */ @@ -39,6 +40,51 @@ */ #define MAX_MAPPERS 2 +/* parameters which describe (unrotated) coordinates of scanout within a fb: */ +struct omap_drm_window { + uint32_t rotation; + int32_t crtc_x, crtc_y; /* signed because can be offscreen */ + uint32_t crtc_w, crtc_h; + uint32_t src_x, src_y; + uint32_t src_w, src_h; +}; + +/* Once GO bit is set, we can't make further updates to shadowed registers + * until the GO bit is cleared. So various parts in the kms code that need + * to update shadowed registers queue up a pair of callbacks, pre_apply + * which is called before setting GO bit, and post_apply that is called + * after GO bit is cleared. The crtc manages the queuing, and everyone + * else goes thru omap_crtc_apply() using these callbacks so that the + * code which has to deal w/ GO bit state is centralized. + */ +struct omap_drm_apply { + struct list_head pending_node, queued_node; + bool queued; + void (*pre_apply)(struct omap_drm_apply *apply); + void (*post_apply)(struct omap_drm_apply *apply); +}; + +/* For transiently registering for different DSS irqs that various parts + * of the KMS code need during setup/configuration. We these are not + * necessarily the same as what drm_vblank_get/put() are requesting, and + * the hysteresis in drm_vblank_put() is not necessarily desirable for + * internal housekeeping related irq usage. + */ +struct omap_drm_irq { + struct list_head node; + uint32_t irqmask; + bool registered; + void (*irq)(struct omap_drm_irq *irq, uint32_t irqstatus); +}; + +/* For KMS code that needs to wait for a certain # of IRQs: + */ +struct omap_irq_wait; +struct omap_irq_wait * omap_irq_wait_init(struct drm_device *dev, + uint32_t irqmask, int count); +int omap_irq_wait(struct drm_device *dev, struct omap_irq_wait *wait, + unsigned long timeout); + struct omap_drm_private { uint32_t omaprev; @@ -58,6 +104,7 @@ struct omap_drm_private { struct workqueue_struct *wq; + /* list of GEM objects: */ struct list_head obj_list; bool has_dmm; @@ -65,6 +112,11 @@ struct omap_drm_private { /* properties: */ struct drm_property *rotation_prop; struct drm_property *zorder_prop; + + /* irq handling: */ + struct list_head irq_list; /* list of omap_drm_irq */ + uint32_t vblank_mask; /* irq bits set for userspace vblank */ + struct omap_drm_irq error_handler; }; /* this should probably be in drm-core to standardize amongst drivers */ @@ -75,15 +127,6 @@ struct omap_drm_private { #define DRM_REFLECT_X 4 #define DRM_REFLECT_Y 5 -/* parameters which describe (unrotated) coordinates of scanout within a fb: */ -struct omap_drm_window { - uint32_t rotation; - int32_t crtc_x, crtc_y; /* signed because can be offscreen */ - uint32_t crtc_w, crtc_h; - uint32_t src_x, src_y; - uint32_t src_w, src_h; -}; - #ifdef CONFIG_DEBUG_FS int omap_debugfs_init(struct drm_minor *minor); void omap_debugfs_cleanup(struct drm_minor *minor); @@ -92,23 +135,36 @@ void omap_gem_describe(struct drm_gem_object *obj, struct seq_file *m); void omap_gem_describe_objects(struct list_head *list, struct seq_file *m); #endif +int omap_irq_enable_vblank(struct drm_device *dev, int crtc); +void omap_irq_disable_vblank(struct drm_device *dev, int crtc); +irqreturn_t omap_irq_handler(DRM_IRQ_ARGS); +void omap_irq_preinstall(struct drm_device *dev); +int omap_irq_postinstall(struct drm_device *dev); +void omap_irq_uninstall(struct drm_device *dev); +void omap_irq_register(struct drm_device *dev, struct omap_drm_irq *irq); +void omap_irq_unregister(struct drm_device *dev, struct omap_drm_irq *irq); +int omap_drm_irq_uninstall(struct drm_device *dev); +int omap_drm_irq_install(struct drm_device *dev); + struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev); void omap_fbdev_free(struct drm_device *dev); +const struct omap_video_timings *omap_crtc_timings(struct drm_crtc *crtc); +enum omap_channel omap_crtc_channel(struct drm_crtc *crtc); +int omap_crtc_apply(struct drm_crtc *crtc, + struct omap_drm_apply *apply); struct drm_crtc *omap_crtc_init(struct drm_device *dev, - struct omap_overlay *ovl, int id); + struct drm_plane *plane, enum omap_channel channel, int id); struct drm_plane *omap_plane_init(struct drm_device *dev, - struct omap_overlay *ovl, unsigned int possible_crtcs, - bool priv); + int plane_id, bool private_plane); int omap_plane_dpms(struct drm_plane *plane, int mode); int omap_plane_mode_set(struct drm_plane *plane, struct drm_crtc *crtc, struct drm_framebuffer *fb, int crtc_x, int crtc_y, unsigned int crtc_w, unsigned int crtc_h, uint32_t src_x, uint32_t src_y, - uint32_t src_w, uint32_t src_h); -void omap_plane_on_endwin(struct drm_plane *plane, + uint32_t src_w, uint32_t src_h, void (*fxn)(void *), void *arg); void omap_plane_install_properties(struct drm_plane *plane, struct drm_mode_object *obj); @@ -116,21 +172,25 @@ int omap_plane_set_property(struct drm_plane *plane, struct drm_property *property, uint64_t val); struct drm_encoder *omap_encoder_init(struct drm_device *dev, - struct omap_overlay_manager *mgr); -struct omap_overlay_manager *omap_encoder_get_manager( + struct omap_dss_device *dssdev); +int omap_encoder_set_enabled(struct drm_encoder *encoder, bool enabled); +int omap_encoder_update(struct drm_encoder *encoder, + struct omap_overlay_manager *mgr, + struct omap_video_timings *timings); + +struct drm_connector *omap_connector_init(struct drm_device *dev, + int connector_type, struct omap_dss_device *dssdev, struct drm_encoder *encoder); struct drm_encoder *omap_connector_attached_encoder( struct drm_connector *connector); -enum drm_connector_status omap_connector_detect( - struct drm_connector *connector, bool force); - -struct drm_connector *omap_connector_init(struct drm_device *dev, - int connector_type, struct omap_dss_device *dssdev); -void omap_connector_mode_set(struct drm_connector *connector, - struct drm_display_mode *mode); void omap_connector_flush(struct drm_connector *connector, int x, int y, int w, int h); +void copy_timings_omap_to_drm(struct drm_display_mode *mode, + struct omap_video_timings *timings); +void copy_timings_drm_to_omap(struct omap_video_timings *timings, + struct drm_display_mode *mode); + uint32_t omap_framebuffer_get_formats(uint32_t *pixel_formats, uint32_t max_formats, enum omap_color_mode supported_modes); struct drm_framebuffer *omap_framebuffer_create(struct drm_device *dev, @@ -207,6 +267,40 @@ static inline int align_pitch(int pitch, int width, int bpp) return ALIGN(pitch, 8 * bytespp); } +static inline enum omap_channel pipe2chan(int pipe) +{ + int num_mgrs = dss_feat_get_num_mgrs(); + + /* + * We usually don't want to create a CRTC for each manager, + * at least not until we have a way to expose private planes + * to userspace. Otherwise there would not be enough video + * pipes left for drm planes. The higher #'d managers tend + * to have more features so start in reverse order. + */ + return num_mgrs - pipe - 1; +} + +/* map crtc to vblank mask */ +static inline uint32_t pipe2vbl(int crtc) +{ + enum omap_channel channel = pipe2chan(crtc); + return dispc_mgr_get_vsync_irq(channel); +} + +static inline int crtc2pipe(struct drm_device *dev, struct drm_crtc *crtc) +{ + struct omap_drm_private *priv = dev->dev_private; + int i; + + for (i = 0; i < ARRAY_SIZE(priv->crtcs); i++) + if (priv->crtcs[i] == crtc) + return i; + + BUG(); /* bogus CRTC ptr */ + return -1; +} + /* should these be made into common util helpers? */ diff --git a/drivers/staging/omapdrm/omap_encoder.c b/drivers/staging/omapdrm/omap_encoder.c index 5341d5e3e31..e053160d2db 100644 --- a/drivers/staging/omapdrm/omap_encoder.c +++ b/drivers/staging/omapdrm/omap_encoder.c @@ -22,37 +22,56 @@ #include "drm_crtc.h" #include "drm_crtc_helper.h" +#include + + /* * encoder funcs */ #define to_omap_encoder(x) container_of(x, struct omap_encoder, base) +/* The encoder and connector both map to same dssdev.. the encoder + * handles the 'active' parts, ie. anything the modifies the state + * of the hw, and the connector handles the 'read-only' parts, like + * detecting connection and reading edid. + */ struct omap_encoder { struct drm_encoder base; - struct omap_overlay_manager *mgr; + struct omap_dss_device *dssdev; }; static void omap_encoder_destroy(struct drm_encoder *encoder) { struct omap_encoder *omap_encoder = to_omap_encoder(encoder); - DBG("%s", omap_encoder->mgr->name); drm_encoder_cleanup(encoder); kfree(omap_encoder); } +static const struct drm_encoder_funcs omap_encoder_funcs = { + .destroy = omap_encoder_destroy, +}; + +/* + * The CRTC drm_crtc_helper_set_mode() doesn't really give us the right + * order.. the easiest way to work around this for now is to make all + * the encoder-helper's no-op's and have the omap_crtc code take care + * of the sequencing and call us in the right points. + * + * Eventually to handle connecting CRTCs to different encoders properly, + * either the CRTC helpers need to change or we need to replace + * drm_crtc_helper_set_mode(), but lets wait until atomic-modeset for + * that. + */ + static void omap_encoder_dpms(struct drm_encoder *encoder, int mode) { - struct omap_encoder *omap_encoder = to_omap_encoder(encoder); - DBG("%s: %d", omap_encoder->mgr->name, mode); } static bool omap_encoder_mode_fixup(struct drm_encoder *encoder, const struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - struct omap_encoder *omap_encoder = to_omap_encoder(encoder); - DBG("%s", omap_encoder->mgr->name); return true; } @@ -60,47 +79,16 @@ static void omap_encoder_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - struct omap_encoder *omap_encoder = to_omap_encoder(encoder); - struct drm_device *dev = encoder->dev; - struct omap_drm_private *priv = dev->dev_private; - int i; - - mode = adjusted_mode; - - DBG("%s: set mode: %dx%d", omap_encoder->mgr->name, - mode->hdisplay, mode->vdisplay); - - for (i = 0; i < priv->num_connectors; i++) { - struct drm_connector *connector = priv->connectors[i]; - if (connector->encoder == encoder) - omap_connector_mode_set(connector, mode); - - } } static void omap_encoder_prepare(struct drm_encoder *encoder) { - struct omap_encoder *omap_encoder = to_omap_encoder(encoder); - struct drm_encoder_helper_funcs *encoder_funcs = - encoder->helper_private; - DBG("%s", omap_encoder->mgr->name); - encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF); } static void omap_encoder_commit(struct drm_encoder *encoder) { - struct omap_encoder *omap_encoder = to_omap_encoder(encoder); - struct drm_encoder_helper_funcs *encoder_funcs = - encoder->helper_private; - DBG("%s", omap_encoder->mgr->name); - omap_encoder->mgr->apply(omap_encoder->mgr); - encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); } -static const struct drm_encoder_funcs omap_encoder_funcs = { - .destroy = omap_encoder_destroy, -}; - static const struct drm_encoder_helper_funcs omap_encoder_helper_funcs = { .dpms = omap_encoder_dpms, .mode_fixup = omap_encoder_mode_fixup, @@ -109,23 +97,54 @@ static const struct drm_encoder_helper_funcs omap_encoder_helper_funcs = { .commit = omap_encoder_commit, }; -struct omap_overlay_manager *omap_encoder_get_manager( - struct drm_encoder *encoder) +/* + * Instead of relying on the helpers for modeset, the omap_crtc code + * calls these functions in the proper sequence. + */ + +int omap_encoder_set_enabled(struct drm_encoder *encoder, bool enabled) { struct omap_encoder *omap_encoder = to_omap_encoder(encoder); - return omap_encoder->mgr; + struct omap_dss_device *dssdev = omap_encoder->dssdev; + struct omap_dss_driver *dssdrv = dssdev->driver; + + if (enabled) { + return dssdrv->enable(dssdev); + } else { + dssdrv->disable(dssdev); + return 0; + } +} + +int omap_encoder_update(struct drm_encoder *encoder, + struct omap_overlay_manager *mgr, + struct omap_video_timings *timings) +{ + struct drm_device *dev = encoder->dev; + struct omap_encoder *omap_encoder = to_omap_encoder(encoder); + struct omap_dss_device *dssdev = omap_encoder->dssdev; + struct omap_dss_driver *dssdrv = dssdev->driver; + int ret; + + dssdev->output->manager = mgr; + + ret = dssdrv->check_timings(dssdev, timings); + if (ret) { + dev_err(dev->dev, "could not set timings: %d\n", ret); + return ret; + } + + dssdrv->set_timings(dssdev, timings); + + return 0; } /* initialize encoder */ struct drm_encoder *omap_encoder_init(struct drm_device *dev, - struct omap_overlay_manager *mgr) + struct omap_dss_device *dssdev) { struct drm_encoder *encoder = NULL; struct omap_encoder *omap_encoder; - struct omap_overlay_manager_info info; - int ret; - - DBG("%s", mgr->name); omap_encoder = kzalloc(sizeof(*omap_encoder), GFP_KERNEL); if (!omap_encoder) { @@ -133,33 +152,14 @@ struct drm_encoder *omap_encoder_init(struct drm_device *dev, goto fail; } - omap_encoder->mgr = mgr; + omap_encoder->dssdev = dssdev; + encoder = &omap_encoder->base; drm_encoder_init(dev, encoder, &omap_encoder_funcs, DRM_MODE_ENCODER_TMDS); drm_encoder_helper_add(encoder, &omap_encoder_helper_funcs); - mgr->get_manager_info(mgr, &info); - - /* TODO: fix hard-coded setup.. */ - info.default_color = 0x00000000; - info.trans_key = 0x00000000; - info.trans_key_type = OMAP_DSS_COLOR_KEY_GFX_DST; - info.trans_enabled = false; - - ret = mgr->set_manager_info(mgr, &info); - if (ret) { - dev_err(dev->dev, "could not set manager info\n"); - goto fail; - } - - ret = mgr->apply(mgr); - if (ret) { - dev_err(dev->dev, "could not apply\n"); - goto fail; - } - return encoder; fail: diff --git a/drivers/staging/omapdrm/omap_irq.c b/drivers/staging/omapdrm/omap_irq.c new file mode 100644 index 00000000000..2629ba7be6c --- /dev/null +++ b/drivers/staging/omapdrm/omap_irq.c @@ -0,0 +1,322 @@ +/* + * drivers/staging/omapdrm/omap_irq.c + * + * Copyright (C) 2012 Texas Instruments + * Author: Rob Clark + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include "omap_drv.h" + +static DEFINE_SPINLOCK(list_lock); + +static void omap_irq_error_handler(struct omap_drm_irq *irq, + uint32_t irqstatus) +{ + DRM_ERROR("errors: %08x\n", irqstatus); +} + +/* call with list_lock and dispc runtime held */ +static void omap_irq_update(struct drm_device *dev) +{ + struct omap_drm_private *priv = dev->dev_private; + struct omap_drm_irq *irq; + uint32_t irqmask = priv->vblank_mask; + + BUG_ON(!spin_is_locked(&list_lock)); + + list_for_each_entry(irq, &priv->irq_list, node) + irqmask |= irq->irqmask; + + DBG("irqmask=%08x", irqmask); + + dispc_write_irqenable(irqmask); + dispc_read_irqenable(); /* flush posted write */ +} + +void omap_irq_register(struct drm_device *dev, struct omap_drm_irq *irq) +{ + struct omap_drm_private *priv = dev->dev_private; + unsigned long flags; + + dispc_runtime_get(); + spin_lock_irqsave(&list_lock, flags); + + if (!WARN_ON(irq->registered)) { + irq->registered = true; + list_add(&irq->node, &priv->irq_list); + omap_irq_update(dev); + } + + spin_unlock_irqrestore(&list_lock, flags); + dispc_runtime_put(); +} + +void omap_irq_unregister(struct drm_device *dev, struct omap_drm_irq *irq) +{ + unsigned long flags; + + dispc_runtime_get(); + spin_lock_irqsave(&list_lock, flags); + + if (!WARN_ON(!irq->registered)) { + irq->registered = false; + list_del(&irq->node); + omap_irq_update(dev); + } + + spin_unlock_irqrestore(&list_lock, flags); + dispc_runtime_put(); +} + +struct omap_irq_wait { + struct omap_drm_irq irq; + int count; +}; + +static DECLARE_WAIT_QUEUE_HEAD(wait_event); + +static void wait_irq(struct omap_drm_irq *irq, uint32_t irqstatus) +{ + struct omap_irq_wait *wait = + container_of(irq, struct omap_irq_wait, irq); + wait->count--; + wake_up_all(&wait_event); +} + +struct omap_irq_wait * omap_irq_wait_init(struct drm_device *dev, + uint32_t irqmask, int count) +{ + struct omap_irq_wait *wait = kzalloc(sizeof(*wait), GFP_KERNEL); + wait->irq.irq = wait_irq; + wait->irq.irqmask = irqmask; + wait->count = count; + omap_irq_register(dev, &wait->irq); + return wait; +} + +int omap_irq_wait(struct drm_device *dev, struct omap_irq_wait *wait, + unsigned long timeout) +{ + int ret = wait_event_timeout(wait_event, (wait->count <= 0), timeout); + omap_irq_unregister(dev, &wait->irq); + kfree(wait); + if (ret == 0) + return -1; + return 0; +} + +/** + * enable_vblank - enable vblank interrupt events + * @dev: DRM device + * @crtc: which irq to enable + * + * Enable vblank interrupts for @crtc. If the device doesn't have + * a hardware vblank counter, this routine should be a no-op, since + * interrupts will have to stay on to keep the count accurate. + * + * RETURNS + * Zero on success, appropriate errno if the given @crtc's vblank + * interrupt cannot be enabled. + */ +int omap_irq_enable_vblank(struct drm_device *dev, int crtc) +{ + struct omap_drm_private *priv = dev->dev_private; + unsigned long flags; + + DBG("dev=%p, crtc=%d", dev, crtc); + + dispc_runtime_get(); + spin_lock_irqsave(&list_lock, flags); + priv->vblank_mask |= pipe2vbl(crtc); + omap_irq_update(dev); + spin_unlock_irqrestore(&list_lock, flags); + dispc_runtime_put(); + + return 0; +} + +/** + * disable_vblank - disable vblank interrupt events + * @dev: DRM device + * @crtc: which irq to enable + * + * Disable vblank interrupts for @crtc. If the device doesn't have + * a hardware vblank counter, this routine should be a no-op, since + * interrupts will have to stay on to keep the count accurate. + */ +void omap_irq_disable_vblank(struct drm_device *dev, int crtc) +{ + struct omap_drm_private *priv = dev->dev_private; + unsigned long flags; + + DBG("dev=%p, crtc=%d", dev, crtc); + + dispc_runtime_get(); + spin_lock_irqsave(&list_lock, flags); + priv->vblank_mask &= ~pipe2vbl(crtc); + omap_irq_update(dev); + spin_unlock_irqrestore(&list_lock, flags); + dispc_runtime_put(); +} + +irqreturn_t omap_irq_handler(DRM_IRQ_ARGS) +{ + struct drm_device *dev = (struct drm_device *) arg; + struct omap_drm_private *priv = dev->dev_private; + struct omap_drm_irq *handler, *n; + unsigned long flags; + unsigned int id; + u32 irqstatus; + + irqstatus = dispc_read_irqstatus(); + dispc_clear_irqstatus(irqstatus); + dispc_read_irqstatus(); /* flush posted write */ + + VERB("irqs: %08x", irqstatus); + + for (id = 0; id < priv->num_crtcs; id++) + if (irqstatus & pipe2vbl(id)) + drm_handle_vblank(dev, id); + + spin_lock_irqsave(&list_lock, flags); + list_for_each_entry_safe(handler, n, &priv->irq_list, node) { + if (handler->irqmask & irqstatus) { + spin_unlock_irqrestore(&list_lock, flags); + handler->irq(handler, handler->irqmask & irqstatus); + spin_lock_irqsave(&list_lock, flags); + } + } + spin_unlock_irqrestore(&list_lock, flags); + + return IRQ_HANDLED; +} + +void omap_irq_preinstall(struct drm_device *dev) +{ + DBG("dev=%p", dev); + dispc_runtime_get(); + dispc_clear_irqstatus(0xffffffff); + dispc_runtime_put(); +} + +int omap_irq_postinstall(struct drm_device *dev) +{ + struct omap_drm_private *priv = dev->dev_private; + struct omap_drm_irq *error_handler = &priv->error_handler; + + DBG("dev=%p", dev); + + INIT_LIST_HEAD(&priv->irq_list); + + error_handler->irq = omap_irq_error_handler; + error_handler->irqmask = DISPC_IRQ_OCP_ERR; + + /* for now ignore DISPC_IRQ_SYNC_LOST_DIGIT.. really I think + * we just need to ignore it while enabling tv-out + */ + error_handler->irqmask &= ~DISPC_IRQ_SYNC_LOST_DIGIT; + + omap_irq_register(dev, error_handler); + + return 0; +} + +void omap_irq_uninstall(struct drm_device *dev) +{ + DBG("dev=%p", dev); + // TODO prolly need to call drm_irq_uninstall() somewhere too +} + +/* + * We need a special version, instead of just using drm_irq_install(), + * because we need to register the irq via omapdss. Once omapdss and + * omapdrm are merged together we can assign the dispc hwmod data to + * ourselves and drop these and just use drm_irq_{install,uninstall}() + */ + +int omap_drm_irq_install(struct drm_device *dev) +{ + int ret; + + mutex_lock(&dev->struct_mutex); + + if (dev->irq_enabled) { + mutex_unlock(&dev->struct_mutex); + return -EBUSY; + } + dev->irq_enabled = 1; + mutex_unlock(&dev->struct_mutex); + + /* Before installing handler */ + if (dev->driver->irq_preinstall) + dev->driver->irq_preinstall(dev); + + ret = dispc_request_irq(dev->driver->irq_handler, dev); + + if (ret < 0) { + mutex_lock(&dev->struct_mutex); + dev->irq_enabled = 0; + mutex_unlock(&dev->struct_mutex); + return ret; + } + + /* After installing handler */ + if (dev->driver->irq_postinstall) + ret = dev->driver->irq_postinstall(dev); + + if (ret < 0) { + mutex_lock(&dev->struct_mutex); + dev->irq_enabled = 0; + mutex_unlock(&dev->struct_mutex); + dispc_free_irq(dev); + } + + return ret; +} + +int omap_drm_irq_uninstall(struct drm_device *dev) +{ + unsigned long irqflags; + int irq_enabled, i; + + mutex_lock(&dev->struct_mutex); + irq_enabled = dev->irq_enabled; + dev->irq_enabled = 0; + mutex_unlock(&dev->struct_mutex); + + /* + * Wake up any waiters so they don't hang. + */ + if (dev->num_crtcs) { + spin_lock_irqsave(&dev->vbl_lock, irqflags); + for (i = 0; i < dev->num_crtcs; i++) { + DRM_WAKEUP(&dev->vbl_queue[i]); + dev->vblank_enabled[i] = 0; + dev->last_vblank[i] = + dev->driver->get_vblank_counter(dev, i); + } + spin_unlock_irqrestore(&dev->vbl_lock, irqflags); + } + + if (!irq_enabled) + return -EINVAL; + + if (dev->driver->irq_uninstall) + dev->driver->irq_uninstall(dev); + + dispc_free_irq(dev); + + return 0; +} diff --git a/drivers/staging/omapdrm/omap_plane.c b/drivers/staging/omapdrm/omap_plane.c index 2a8e5bab49c..bb989d7f026 100644 --- a/drivers/staging/omapdrm/omap_plane.c +++ b/drivers/staging/omapdrm/omap_plane.c @@ -41,12 +41,14 @@ struct callback { struct omap_plane { struct drm_plane base; - struct omap_overlay *ovl; + int id; /* TODO rename omap_plane -> omap_plane_id in omapdss so I can use the enum */ + const char *name; struct omap_overlay_info info; + struct omap_drm_apply apply; /* position/orientation of scanout within the fb: */ struct omap_drm_window win; - + bool enabled; /* last fb that we pinned: */ struct drm_framebuffer *pinned_fb; @@ -54,189 +56,15 @@ struct omap_plane { uint32_t nformats; uint32_t formats[32]; - /* for synchronizing access to unpins fifo */ - struct mutex unpin_mutex; + struct omap_drm_irq error_irq; - /* set of bo's pending unpin until next END_WIN irq */ + /* set of bo's pending unpin until next post_apply() */ DECLARE_KFIFO_PTR(unpin_fifo, struct drm_gem_object *); - int num_unpins, pending_num_unpins; - - /* for deferred unpin when we need to wait for scanout complete irq */ - struct work_struct work; - - /* callback on next endwin irq */ - struct callback endwin; -}; -/* map from ovl->id to the irq we are interested in for scanout-done */ -static const uint32_t id2irq[] = { - [OMAP_DSS_GFX] = DISPC_IRQ_GFX_END_WIN, - [OMAP_DSS_VIDEO1] = DISPC_IRQ_VID1_END_WIN, - [OMAP_DSS_VIDEO2] = DISPC_IRQ_VID2_END_WIN, - [OMAP_DSS_VIDEO3] = DISPC_IRQ_VID3_END_WIN, + // XXX maybe get rid of this and handle vblank in crtc too? + struct callback apply_done_cb; }; -static void dispc_isr(void *arg, uint32_t mask) -{ - struct drm_plane *plane = arg; - struct omap_plane *omap_plane = to_omap_plane(plane); - struct omap_drm_private *priv = plane->dev->dev_private; - - omap_dispc_unregister_isr(dispc_isr, plane, - id2irq[omap_plane->ovl->id]); - - queue_work(priv->wq, &omap_plane->work); -} - -static void unpin_worker(struct work_struct *work) -{ - struct omap_plane *omap_plane = - container_of(work, struct omap_plane, work); - struct callback endwin; - - mutex_lock(&omap_plane->unpin_mutex); - DBG("unpinning %d of %d", omap_plane->num_unpins, - omap_plane->num_unpins + omap_plane->pending_num_unpins); - while (omap_plane->num_unpins > 0) { - struct drm_gem_object *bo = NULL; - int ret = kfifo_get(&omap_plane->unpin_fifo, &bo); - WARN_ON(!ret); - omap_gem_put_paddr(bo); - drm_gem_object_unreference_unlocked(bo); - omap_plane->num_unpins--; - } - endwin = omap_plane->endwin; - omap_plane->endwin.fxn = NULL; - mutex_unlock(&omap_plane->unpin_mutex); - - if (endwin.fxn) - endwin.fxn(endwin.arg); -} - -static void install_irq(struct drm_plane *plane) -{ - struct omap_plane *omap_plane = to_omap_plane(plane); - struct omap_overlay *ovl = omap_plane->ovl; - int ret; - - ret = omap_dispc_register_isr(dispc_isr, plane, id2irq[ovl->id]); - - /* - * omapdss has upper limit on # of registered irq handlers, - * which we shouldn't hit.. but if we do the limit should - * be raised or bad things happen: - */ - WARN_ON(ret == -EBUSY); -} - -/* push changes down to dss2 */ -static int commit(struct drm_plane *plane) -{ - struct drm_device *dev = plane->dev; - struct omap_plane *omap_plane = to_omap_plane(plane); - struct omap_overlay *ovl = omap_plane->ovl; - struct omap_overlay_info *info = &omap_plane->info; - int ret; - - DBG("%s", ovl->name); - DBG("%dx%d -> %dx%d (%d)", info->width, info->height, info->out_width, - info->out_height, info->screen_width); - DBG("%d,%d %08x %08x", info->pos_x, info->pos_y, - info->paddr, info->p_uv_addr); - - /* NOTE: do we want to do this at all here, or just wait - * for dpms(ON) since other CRTC's may not have their mode - * set yet, so fb dimensions may still change.. - */ - ret = ovl->set_overlay_info(ovl, info); - if (ret) { - dev_err(dev->dev, "could not set overlay info\n"); - return ret; - } - - mutex_lock(&omap_plane->unpin_mutex); - omap_plane->num_unpins += omap_plane->pending_num_unpins; - omap_plane->pending_num_unpins = 0; - mutex_unlock(&omap_plane->unpin_mutex); - - /* our encoder doesn't necessarily get a commit() after this, in - * particular in the dpms() and mode_set_base() cases, so force the - * manager to update: - * - * could this be in the encoder somehow? - */ - if (ovl->manager) { - ret = ovl->manager->apply(ovl->manager); - if (ret) { - dev_err(dev->dev, "could not apply settings\n"); - return ret; - } - - /* - * NOTE: really this should be atomic w/ mgr->apply() but - * omapdss does not expose such an API - */ - if (omap_plane->num_unpins > 0) - install_irq(plane); - - } else { - struct omap_drm_private *priv = dev->dev_private; - queue_work(priv->wq, &omap_plane->work); - } - - - if (ovl->is_enabled(ovl)) { - omap_framebuffer_flush(plane->fb, info->pos_x, info->pos_y, - info->out_width, info->out_height); - } - - return 0; -} - -/* when CRTC that we are attached to has potentially changed, this checks - * if we are attached to proper manager, and if necessary updates. - */ -static void update_manager(struct drm_plane *plane) -{ - struct omap_drm_private *priv = plane->dev->dev_private; - struct omap_plane *omap_plane = to_omap_plane(plane); - struct omap_overlay *ovl = omap_plane->ovl; - struct omap_overlay_manager *mgr = NULL; - int i; - - if (plane->crtc) { - for (i = 0; i < priv->num_encoders; i++) { - struct drm_encoder *encoder = priv->encoders[i]; - if (encoder->crtc == plane->crtc) { - mgr = omap_encoder_get_manager(encoder); - break; - } - } - } - - if (ovl->manager != mgr) { - bool enabled = ovl->is_enabled(ovl); - - /* don't switch things around with enabled overlays: */ - if (enabled) - omap_plane_dpms(plane, DRM_MODE_DPMS_OFF); - - if (ovl->manager) { - DBG("disconnecting %s from %s", ovl->name, - ovl->manager->name); - ovl->unset_manager(ovl); - } - - if (mgr) { - DBG("connecting %s to %s", ovl->name, mgr->name); - ovl->set_manager(ovl, mgr); - } - - if (enabled && mgr) - omap_plane_dpms(plane, DRM_MODE_DPMS_ON); - } -} - static void unpin(void *arg, struct drm_gem_object *bo) { struct drm_plane *plane = arg; @@ -244,7 +72,6 @@ static void unpin(void *arg, struct drm_gem_object *bo) if (kfifo_put(&omap_plane->unpin_fifo, (const struct drm_gem_object **)&bo)) { - omap_plane->pending_num_unpins++; /* also hold a ref so it isn't free'd while pinned */ drm_gem_object_reference(bo); } else { @@ -264,13 +91,19 @@ static int update_pin(struct drm_plane *plane, struct drm_framebuffer *fb) DBG("%p -> %p", pinned_fb, fb); - mutex_lock(&omap_plane->unpin_mutex); + if (fb) + drm_framebuffer_reference(fb); + ret = omap_framebuffer_replace(pinned_fb, fb, plane, unpin); - mutex_unlock(&omap_plane->unpin_mutex); + + if (pinned_fb) + drm_framebuffer_unreference(pinned_fb); if (ret) { dev_err(plane->dev->dev, "could not swap %p -> %p\n", omap_plane->pinned_fb, fb); + if (fb) + drm_framebuffer_unreference(fb); omap_plane->pinned_fb = NULL; return ret; } @@ -281,31 +114,90 @@ static int update_pin(struct drm_plane *plane, struct drm_framebuffer *fb) return 0; } -/* update parameters that are dependent on the framebuffer dimensions and - * position within the fb that this plane scans out from. This is called - * when framebuffer or x,y base may have changed. - */ -static void update_scanout(struct drm_plane *plane) +static void omap_plane_pre_apply(struct omap_drm_apply *apply) { - struct omap_plane *omap_plane = to_omap_plane(plane); - struct omap_overlay_info *info = &omap_plane->info; + struct omap_plane *omap_plane = + container_of(apply, struct omap_plane, apply); struct omap_drm_window *win = &omap_plane->win; + struct drm_plane *plane = &omap_plane->base; + struct drm_device *dev = plane->dev; + struct omap_overlay_info *info = &omap_plane->info; + struct drm_crtc *crtc = plane->crtc; + enum omap_channel channel; + bool enabled = omap_plane->enabled && crtc; + bool ilace, replication; int ret; - ret = update_pin(plane, plane->fb); - if (ret) { - dev_err(plane->dev->dev, - "could not pin fb: %d\n", ret); - omap_plane_dpms(plane, DRM_MODE_DPMS_OFF); + DBG("%s, enabled=%d", omap_plane->name, enabled); + + /* if fb has changed, pin new fb: */ + update_pin(plane, enabled ? plane->fb : NULL); + + if (!enabled) { + dispc_ovl_enable(omap_plane->id, false); return; } + channel = omap_crtc_channel(crtc); + + /* update scanout: */ omap_framebuffer_update_scanout(plane->fb, win, info); - DBG("%s: %d,%d: %08x %08x (%d)", omap_plane->ovl->name, - win->src_x, win->src_y, - (u32)info->paddr, (u32)info->p_uv_addr, + DBG("%dx%d -> %dx%d (%d)", info->width, info->height, + info->out_width, info->out_height, info->screen_width); + DBG("%d,%d %08x %08x", info->pos_x, info->pos_y, + info->paddr, info->p_uv_addr); + + /* TODO: */ + ilace = false; + replication = false; + + /* and finally, update omapdss: */ + ret = dispc_ovl_setup(omap_plane->id, info, + replication, omap_crtc_timings(crtc), false); + if (ret) { + dev_err(dev->dev, "dispc_ovl_setup failed: %d\n", ret); + return; + } + + dispc_ovl_enable(omap_plane->id, true); + dispc_ovl_set_channel_out(omap_plane->id, channel); +} + +static void omap_plane_post_apply(struct omap_drm_apply *apply) +{ + struct omap_plane *omap_plane = + container_of(apply, struct omap_plane, apply); + struct drm_plane *plane = &omap_plane->base; + struct omap_overlay_info *info = &omap_plane->info; + struct drm_gem_object *bo = NULL; + struct callback cb; + + cb = omap_plane->apply_done_cb; + omap_plane->apply_done_cb.fxn = NULL; + + while (kfifo_get(&omap_plane->unpin_fifo, &bo)) { + omap_gem_put_paddr(bo); + drm_gem_object_unreference_unlocked(bo); + } + + if (cb.fxn) + cb.fxn(cb.arg); + + if (omap_plane->enabled) { + omap_framebuffer_flush(plane->fb, info->pos_x, info->pos_y, + info->out_width, info->out_height); + } +} + +static int apply(struct drm_plane *plane) +{ + if (plane->crtc) { + struct omap_plane *omap_plane = to_omap_plane(plane); + return omap_crtc_apply(plane->crtc, &omap_plane->apply); + } + return 0; } int omap_plane_mode_set(struct drm_plane *plane, @@ -313,7 +205,8 @@ int omap_plane_mode_set(struct drm_plane *plane, int crtc_x, int crtc_y, unsigned int crtc_w, unsigned int crtc_h, uint32_t src_x, uint32_t src_y, - uint32_t src_w, uint32_t src_h) + uint32_t src_w, uint32_t src_h, + void (*fxn)(void *), void *arg) { struct omap_plane *omap_plane = to_omap_plane(plane); struct omap_drm_window *win = &omap_plane->win; @@ -329,17 +222,20 @@ int omap_plane_mode_set(struct drm_plane *plane, win->src_w = src_w >> 16; win->src_h = src_h >> 16; - /* note: this is done after this fxn returns.. but if we need - * to do a commit/update_scanout, etc before this returns we - * need the current value. - */ + if (fxn) { + /* omap_crtc should ensure that a new page flip + * isn't permitted while there is one pending: + */ + BUG_ON(omap_plane->apply_done_cb.fxn); + + omap_plane->apply_done_cb.fxn = fxn; + omap_plane->apply_done_cb.arg = arg; + } + plane->fb = fb; plane->crtc = crtc; - update_scanout(plane); - update_manager(plane); - - return 0; + return apply(plane); } static int omap_plane_update(struct drm_plane *plane, @@ -349,9 +245,12 @@ static int omap_plane_update(struct drm_plane *plane, uint32_t src_x, uint32_t src_y, uint32_t src_w, uint32_t src_h) { - omap_plane_mode_set(plane, crtc, fb, crtc_x, crtc_y, crtc_w, crtc_h, - src_x, src_y, src_w, src_h); - return omap_plane_dpms(plane, DRM_MODE_DPMS_ON); + struct omap_plane *omap_plane = to_omap_plane(plane); + omap_plane->enabled = true; + return omap_plane_mode_set(plane, crtc, fb, + crtc_x, crtc_y, crtc_w, crtc_h, + src_x, src_y, src_w, src_h, + NULL, NULL); } static int omap_plane_disable(struct drm_plane *plane) @@ -364,48 +263,32 @@ static int omap_plane_disable(struct drm_plane *plane) static void omap_plane_destroy(struct drm_plane *plane) { struct omap_plane *omap_plane = to_omap_plane(plane); - DBG("%s", omap_plane->ovl->name); + + DBG("%s", omap_plane->name); + + omap_irq_unregister(plane->dev, &omap_plane->error_irq); + omap_plane_disable(plane); drm_plane_cleanup(plane); - WARN_ON(omap_plane->pending_num_unpins + omap_plane->num_unpins > 0); + + WARN_ON(!kfifo_is_empty(&omap_plane->unpin_fifo)); kfifo_free(&omap_plane->unpin_fifo); + kfree(omap_plane); } int omap_plane_dpms(struct drm_plane *plane, int mode) { struct omap_plane *omap_plane = to_omap_plane(plane); - struct omap_overlay *ovl = omap_plane->ovl; - int r; + bool enabled = (mode == DRM_MODE_DPMS_ON); + int ret = 0; - DBG("%s: %d", omap_plane->ovl->name, mode); - - if (mode == DRM_MODE_DPMS_ON) { - update_scanout(plane); - r = commit(plane); - if (!r) - r = ovl->enable(ovl); - } else { - struct omap_drm_private *priv = plane->dev->dev_private; - r = ovl->disable(ovl); - update_pin(plane, NULL); - queue_work(priv->wq, &omap_plane->work); + if (enabled != omap_plane->enabled) { + omap_plane->enabled = enabled; + ret = apply(plane); } - return r; -} - -void omap_plane_on_endwin(struct drm_plane *plane, - void (*fxn)(void *), void *arg) -{ - struct omap_plane *omap_plane = to_omap_plane(plane); - - mutex_lock(&omap_plane->unpin_mutex); - omap_plane->endwin.fxn = fxn; - omap_plane->endwin.arg = arg; - mutex_unlock(&omap_plane->unpin_mutex); - - install_irq(plane); + return ret; } /* helper to install properties which are common to planes and crtcs */ @@ -454,25 +337,13 @@ int omap_plane_set_property(struct drm_plane *plane, int ret = -EINVAL; if (property == priv->rotation_prop) { - struct omap_overlay *ovl = omap_plane->ovl; - - DBG("%s: rotation: %02x", ovl->name, (uint32_t)val); + DBG("%s: rotation: %02x", omap_plane->name, (uint32_t)val); omap_plane->win.rotation = val; - - if (ovl->is_enabled(ovl)) - ret = omap_plane_dpms(plane, DRM_MODE_DPMS_ON); - else - ret = 0; + ret = apply(plane); } else if (property == priv->zorder_prop) { - struct omap_overlay *ovl = omap_plane->ovl; - - DBG("%s: zorder: %d", ovl->name, (uint32_t)val); + DBG("%s: zorder: %02x", omap_plane->name, (uint32_t)val); omap_plane->info.zorder = val; - - if (ovl->is_enabled(ovl)) - ret = omap_plane_dpms(plane, DRM_MODE_DPMS_ON); - else - ret = 0; + ret = apply(plane); } return ret; @@ -485,20 +356,38 @@ static const struct drm_plane_funcs omap_plane_funcs = { .set_property = omap_plane_set_property, }; +static void omap_plane_error_irq(struct omap_drm_irq *irq, uint32_t irqstatus) +{ + struct omap_plane *omap_plane = + container_of(irq, struct omap_plane, error_irq); + DRM_ERROR("%s: errors: %08x\n", omap_plane->name, irqstatus); +} + +static const char *plane_names[] = { + [OMAP_DSS_GFX] = "gfx", + [OMAP_DSS_VIDEO1] = "vid1", + [OMAP_DSS_VIDEO2] = "vid2", + [OMAP_DSS_VIDEO3] = "vid3", +}; + +static const uint32_t error_irqs[] = { + [OMAP_DSS_GFX] = DISPC_IRQ_GFX_FIFO_UNDERFLOW, + [OMAP_DSS_VIDEO1] = DISPC_IRQ_VID1_FIFO_UNDERFLOW, + [OMAP_DSS_VIDEO2] = DISPC_IRQ_VID2_FIFO_UNDERFLOW, + [OMAP_DSS_VIDEO3] = DISPC_IRQ_VID3_FIFO_UNDERFLOW, +}; + /* initialize plane */ struct drm_plane *omap_plane_init(struct drm_device *dev, - struct omap_overlay *ovl, unsigned int possible_crtcs, - bool priv) + int id, bool private_plane) { + struct omap_drm_private *priv = dev->dev_private; struct drm_plane *plane = NULL; struct omap_plane *omap_plane; + struct omap_overlay_info *info; int ret; - DBG("%s: possible_crtcs=%08x, priv=%d", ovl->name, - possible_crtcs, priv); - - /* friendly reminder to update table for future hw: */ - WARN_ON(ovl->id >= ARRAY_SIZE(id2irq)); + DBG("%s: priv=%d", plane_names[id], private_plane); omap_plane = kzalloc(sizeof(*omap_plane), GFP_KERNEL); if (!omap_plane) { @@ -506,47 +395,50 @@ struct drm_plane *omap_plane_init(struct drm_device *dev, goto fail; } - mutex_init(&omap_plane->unpin_mutex); - ret = kfifo_alloc(&omap_plane->unpin_fifo, 16, GFP_KERNEL); if (ret) { dev_err(dev->dev, "could not allocate unpin FIFO\n"); goto fail; } - INIT_WORK(&omap_plane->work, unpin_worker); - omap_plane->nformats = omap_framebuffer_get_formats( omap_plane->formats, ARRAY_SIZE(omap_plane->formats), - ovl->supported_modes); - omap_plane->ovl = ovl; + dss_feat_get_supported_color_modes(id)); + omap_plane->id = id; + omap_plane->name = plane_names[id]; + plane = &omap_plane->base; - drm_plane_init(dev, plane, possible_crtcs, &omap_plane_funcs, - omap_plane->formats, omap_plane->nformats, priv); + omap_plane->apply.pre_apply = omap_plane_pre_apply; + omap_plane->apply.post_apply = omap_plane_post_apply; + + omap_plane->error_irq.irqmask = error_irqs[id]; + omap_plane->error_irq.irq = omap_plane_error_irq; + omap_irq_register(dev, &omap_plane->error_irq); + + drm_plane_init(dev, plane, (1 << priv->num_crtcs) - 1, &omap_plane_funcs, + omap_plane->formats, omap_plane->nformats, private_plane); omap_plane_install_properties(plane, &plane->base); /* get our starting configuration, set defaults for parameters * we don't currently use, etc: */ - ovl->get_overlay_info(ovl, &omap_plane->info); - omap_plane->info.rotation_type = OMAP_DSS_ROT_DMA; - omap_plane->info.rotation = OMAP_DSS_ROT_0; - omap_plane->info.global_alpha = 0xff; - omap_plane->info.mirror = 0; + info = &omap_plane->info; + info->rotation_type = OMAP_DSS_ROT_DMA; + info->rotation = OMAP_DSS_ROT_0; + info->global_alpha = 0xff; + info->mirror = 0; /* Set defaults depending on whether we are a CRTC or overlay * layer. * TODO add ioctl to give userspace an API to change this.. this * will come in a subsequent patch. */ - if (priv) + if (private_plane) omap_plane->info.zorder = 0; else - omap_plane->info.zorder = ovl->id; - - update_manager(plane); + omap_plane->info.zorder = id; return plane; -- cgit v1.2.3 From 412fc87093df7d40d187f6f167524221ae8080b2 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Thu, 20 Dec 2012 08:30:03 -0600 Subject: staging: drm/omap: fix flags in dma buf exporting This patch fixes flags passed to dma buf exporting. Signed-off-by: Seung-Woo Kim Signed-off-by: Rob Clark Signed-off-by: Greg Kroah-Hartman --- drivers/staging/omapdrm/omap_gem_dmabuf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/omapdrm/omap_gem_dmabuf.c b/drivers/staging/omapdrm/omap_gem_dmabuf.c index 9a302062b03..eabb8b57f6c 100644 --- a/drivers/staging/omapdrm/omap_gem_dmabuf.c +++ b/drivers/staging/omapdrm/omap_gem_dmabuf.c @@ -194,7 +194,7 @@ struct dma_buf_ops omap_dmabuf_ops = { struct dma_buf *omap_gem_prime_export(struct drm_device *dev, struct drm_gem_object *obj, int flags) { - return dma_buf_export(obj, &omap_dmabuf_ops, obj->size, 0600); + return dma_buf_export(obj, &omap_dmabuf_ops, obj->size, flags); } struct drm_gem_object *omap_gem_prime_import(struct drm_device *dev, -- cgit v1.2.3 From 4d27b2ca154eff58f4d7f34e4cd374c1070a56fc Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Date: Tue, 25 Dec 2012 15:58:37 +0100 Subject: staging: drm/imx: check return value of ipu_reset() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ipu_reset() can fail with a timeout. Check the return value and act appropriately. Signed-off-by: Lothar Waßmann Acked-by: Sascha Hauer Signed-off-by: Greg Kroah-Hartman --- drivers/staging/imx-drm/ipu-v3/ipu-common.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/staging/imx-drm/ipu-v3/ipu-common.c b/drivers/staging/imx-drm/ipu-v3/ipu-common.c index 677e665ca86..f7059cddd7f 100644 --- a/drivers/staging/imx-drm/ipu-v3/ipu-common.c +++ b/drivers/staging/imx-drm/ipu-v3/ipu-common.c @@ -1104,7 +1104,9 @@ static int ipu_probe(struct platform_device *pdev) if (ret) goto out_failed_irq; - ipu_reset(ipu); + ret = ipu_reset(ipu); + if (ret) + goto out_failed_reset; /* Set MCU_T to divide MCU access window into 2 */ ipu_cm_write(ipu, 0x00400000L | (IPU_MCU_T_DEFAULT << 18), @@ -1129,6 +1131,7 @@ failed_add_clients: ipu_submodules_exit(ipu); failed_submodules_init: ipu_irq_exit(ipu); +out_failed_reset: out_failed_irq: clk_disable_unprepare(ipu->clk); failed_clk_get: -- cgit v1.2.3 From 9a8f3f4490922dd62556a8004aa06bc3f1054894 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Date: Tue, 25 Dec 2012 15:58:38 +0100 Subject: staging: drm/imx: several bug fixes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit - convert bogus IS_ERR_OR_NULL() to IS_ERR() - fix copy/paste error - check return value of ipu_crtc_init() Signed-off-by: Lothar Waßmann Acked-by: Sascha Hauer Signed-off-by: Greg Kroah-Hartman --- drivers/staging/imx-drm/ipuv3-crtc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/staging/imx-drm/ipuv3-crtc.c b/drivers/staging/imx-drm/ipuv3-crtc.c index 1892006526b..4b3a019409b 100644 --- a/drivers/staging/imx-drm/ipuv3-crtc.c +++ b/drivers/staging/imx-drm/ipuv3-crtc.c @@ -452,7 +452,7 @@ static int ipu_get_resources(struct ipu_crtc *ipu_crtc, int ret; ipu_crtc->ipu_ch = ipu_idmac_get(ipu, pdata->dma[0]); - if (IS_ERR_OR_NULL(ipu_crtc->ipu_ch)) { + if (IS_ERR(ipu_crtc->ipu_ch)) { ret = PTR_ERR(ipu_crtc->ipu_ch); goto err_out; } @@ -472,7 +472,7 @@ static int ipu_get_resources(struct ipu_crtc *ipu_crtc, if (pdata->dp >= 0) { ipu_crtc->dp = ipu_dp_get(ipu, pdata->dp); if (IS_ERR(ipu_crtc->dp)) { - ret = PTR_ERR(ipu_crtc->ipu_ch); + ret = PTR_ERR(ipu_crtc->dp); goto err_out; } } @@ -548,6 +548,8 @@ static int ipu_drm_probe(struct platform_device *pdev) ipu_crtc->dev = &pdev->dev; ret = ipu_crtc_init(ipu_crtc, pdata); + if (ret) + return ret; platform_set_drvdata(pdev, ipu_crtc); -- cgit v1.2.3 From efe57d5977fa62b8fdf3a38c236d1aa5351228be Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Date: Tue, 25 Dec 2012 15:58:39 +0100 Subject: staging: drm/imx: fix double free bug in error path MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit kfree(imx_drm_encoder) is already being called at the label 'err_register'. Signed-off-by: Lothar Waßmann Acked-by: Sascha Hauer Signed-off-by: Greg Kroah-Hartman --- drivers/staging/imx-drm/imx-drm-core.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/staging/imx-drm/imx-drm-core.c b/drivers/staging/imx-drm/imx-drm-core.c index ecf0f44bc70..cec19f1cf56 100644 --- a/drivers/staging/imx-drm/imx-drm-core.c +++ b/drivers/staging/imx-drm/imx-drm-core.c @@ -584,7 +584,6 @@ int imx_drm_add_encoder(struct drm_encoder *encoder, ret = imx_drm_encoder_register(imx_drm_encoder); if (ret) { - kfree(imx_drm_encoder); ret = -ENOMEM; goto err_register; } -- cgit v1.2.3 From 0d826c3919ceede3c6afc3e87fc7087e0c863e7e Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 26 Dec 2012 20:51:13 -0600 Subject: staging: rtl8187se: Fix failure to check pci_map_single() Beginning with kernel 3.8, the DMA mapping routines issue a warning for the first call to pci_map_single() that is not checked with a pci_dma_mapping_error() call. Signed-off-by: Larry Finger Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8187se/r8180_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c index ae38475854b..d10d75e8a33 100644 --- a/drivers/staging/rtl8187se/r8180_core.c +++ b/drivers/staging/rtl8187se/r8180_core.c @@ -937,7 +937,8 @@ short alloc_rx_desc_ring(struct net_device *dev, u16 bufsize, int count) dma_tmp = pci_map_single(pdev, buf, bufsize * sizeof(u8), PCI_DMA_FROMDEVICE); - + if (pci_dma_mapping_error(pdev, dma_tmp)) + return -1; if (-1 == buffer_add(&(priv->rxbuffer), buf, dma_tmp, &(priv->rxbufferhead))) { DMESGE("Unable to allocate mem RX buf"); -- cgit v1.2.3 From 2dcb4a298cd9ffdd5b53437430863c80a868dc90 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 26 Dec 2012 20:51:12 -0600 Subject: staging: rtl8192e: Fix failure to check pci_map_single() Beginning with kernel 3.8, the DMA mapping routines issue a warning for the first call to pci_map_single() that is not checked with a pci_dma_mapping_error() call. Signed-off-by: Larry Finger Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c | 4 ++++ drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 11 +++++++++-- 2 files changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c index 808aab6fa5e..a9d78e9651c 100644 --- a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c +++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c @@ -1183,6 +1183,8 @@ void rtl8192_tx_fill_desc(struct net_device *dev, struct tx_desc *pdesc, pTxFwInfo->TxRate, cb_desc); + if (pci_dma_mapping_error(priv->pdev, mapping)) + RT_TRACE(COMP_ERR, "DMA Mapping error\n");; if (cb_desc->bAMPDUEnable) { pTxFwInfo->AllowAggregation = 1; pTxFwInfo->RxMF = cb_desc->ampdu_factor; @@ -1280,6 +1282,8 @@ void rtl8192_tx_fill_cmd_desc(struct net_device *dev, dma_addr_t mapping = pci_map_single(priv->pdev, skb->data, skb->len, PCI_DMA_TODEVICE); + if (pci_dma_mapping_error(priv->pdev, mapping)) + RT_TRACE(COMP_ERR, "DMA Mapping error\n");; memset(entry, 0, 12); entry->LINIP = cb_desc->bLastIniPkt; entry->FirstSeg = 1; diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c index 1a70f324552..4ebf99b3097 100644 --- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c @@ -2104,7 +2104,10 @@ static short rtl8192_alloc_rx_desc_ring(struct net_device *dev) skb_tail_pointer_rsl(skb), priv->rxbuffersize, PCI_DMA_FROMDEVICE); - + if (pci_dma_mapping_error(priv->pdev, *mapping)) { + dev_kfree_skb_any(skb); + return -1; + } entry->BufferAddress = cpu_to_le32(*mapping); entry->Length = priv->rxbuffersize; @@ -2397,7 +2400,11 @@ static void rtl8192_rx_normal(struct net_device *dev) skb_tail_pointer_rsl(skb), priv->rxbuffersize, PCI_DMA_FROMDEVICE); - + if (pci_dma_mapping_error(priv->pdev, + *((dma_addr_t *)skb->cb))) { + dev_kfree_skb_any(skb); + return; + } } done: pdesc->BufferAddress = cpu_to_le32(*((dma_addr_t *)skb->cb)); -- cgit v1.2.3 From ae428655b826f2755a8101b27beda42a275ef8ad Mon Sep 17 00:00:00 2001 From: Nickolai Zeldovich Date: Sat, 5 Jan 2013 14:17:45 -0500 Subject: staging: speakup: avoid out-of-range access in synth_init() Check that array index is in-bounds before accessing the synths[] array. Signed-off-by: Nickolai Zeldovich Cc: stable Cc: Samuel Thibault Signed-off-by: Greg Kroah-Hartman --- drivers/staging/speakup/synth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/speakup/synth.c b/drivers/staging/speakup/synth.c index df953379809..b91d22b6330 100644 --- a/drivers/staging/speakup/synth.c +++ b/drivers/staging/speakup/synth.c @@ -342,7 +342,7 @@ int synth_init(char *synth_name) mutex_lock(&spk_mutex); /* First, check if we already have it loaded. */ - for (i = 0; synths[i] != NULL && i < MAXSYNTHS; i++) + for (i = 0; i < MAXSYNTHS && synths[i] != NULL; i++) if (strcmp(synths[i]->name, synth_name) == 0) synth = synths[i]; -- cgit v1.2.3 From 6102c48bd421074a33e102f2ebda3724e8d275f9 Mon Sep 17 00:00:00 2001 From: Samuel Thibault Date: Mon, 7 Jan 2013 22:03:51 +0100 Subject: staging: speakup: avoid out-of-range access in synth_add() Check that array index is in-bounds before accessing the synths[] array. Signed-off-by: Samuel Thibault Cc: stable Cc: Nickolai Zeldovich Signed-off-by: Greg Kroah-Hartman --- drivers/staging/speakup/synth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/speakup/synth.c b/drivers/staging/speakup/synth.c index b91d22b6330..7616f058a00 100644 --- a/drivers/staging/speakup/synth.c +++ b/drivers/staging/speakup/synth.c @@ -423,7 +423,7 @@ int synth_add(struct spk_synth *in_synth) int i; int status = 0; mutex_lock(&spk_mutex); - for (i = 0; synths[i] != NULL && i < MAXSYNTHS; i++) + for (i = 0; i < MAXSYNTHS && synths[i] != NULL; i++) /* synth_remove() is responsible for rotating the array down */ if (in_synth == synths[i]) { mutex_unlock(&spk_mutex); -- cgit v1.2.3 From 9349f8af28ea89639b3c97da583d60631ed10398 Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Fri, 14 Dec 2012 15:02:44 +0400 Subject: staging: vme_pio2: fix oops on module unloading This patch forbids loading vme_pio2 module without specifing "num_bus" parameter. Otherwise on module unloading pio2_exit() calls vme_unregister_driver() for not registered pio2_driver. Signed-off-by: Konstantin Khlebnikov Cc: Manohar Vanga Acked-by: Martyn Welch Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vme/devices/vme_pio2_core.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) diff --git a/drivers/staging/vme/devices/vme_pio2_core.c b/drivers/staging/vme/devices/vme_pio2_core.c index 0331178ca3b..bf73ba26e88 100644 --- a/drivers/staging/vme/devices/vme_pio2_core.c +++ b/drivers/staging/vme/devices/vme_pio2_core.c @@ -162,11 +162,9 @@ static struct vme_driver pio2_driver = { static int __init pio2_init(void) { - int retval = 0; - if (bus_num == 0) { pr_err("No cards, skipping registration\n"); - goto err_nocard; + return -ENODEV; } if (bus_num > PIO2_CARDS_MAX) { @@ -176,15 +174,7 @@ static int __init pio2_init(void) } /* Register the PIO2 driver */ - retval = vme_register_driver(&pio2_driver, bus_num); - if (retval != 0) - goto err_reg; - - return retval; - -err_reg: -err_nocard: - return retval; + return vme_register_driver(&pio2_driver, bus_num); } static int pio2_match(struct vme_dev *vdev) -- cgit v1.2.3 From 34b55d8c48f4f76044d8f4d6ec3dc786cf210312 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=89ric=20Piel?= Date: Wed, 19 Dec 2012 13:03:13 +0100 Subject: staging: comedi: fix minimum AO period for NI 625x and NI 628x MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The minimum period was set to 357 ns, while the divider for these boards is 50 ns. This prevented to output at maximum speed as ni_ao_cmdtest() would return 357 but would not accept it. Not sure why it was set to 357 ns (this was done before the git history, which starts 5 years ago). My guess is that it comes from reading the specification stating a 2.8 MHz rate (~ 357 ns). The latest specification states a 2.86 MHz rate (~ 350 ns), which makes a lot more sense. Tested on a pci-6251. Signed-off-by: Éric Piel Acked-By: Ian Abbott Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/ni_pcimio.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/staging/comedi/drivers/ni_pcimio.c b/drivers/staging/comedi/drivers/ni_pcimio.c index aaac0b2cc9e..fd1662b4175 100644 --- a/drivers/staging/comedi/drivers/ni_pcimio.c +++ b/drivers/staging/comedi/drivers/ni_pcimio.c @@ -963,7 +963,7 @@ static const struct ni_board_struct ni_boards[] = { .ao_range_table = &range_ni_M_625x_ao, .reg_type = ni_reg_625x, .ao_unipolar = 0, - .ao_speed = 357, + .ao_speed = 350, .num_p0_dio_channels = 8, .caldac = {caldac_none}, .has_8255 = 0, @@ -982,7 +982,7 @@ static const struct ni_board_struct ni_boards[] = { .ao_range_table = &range_ni_M_625x_ao, .reg_type = ni_reg_625x, .ao_unipolar = 0, - .ao_speed = 357, + .ao_speed = 350, .num_p0_dio_channels = 8, .caldac = {caldac_none}, .has_8255 = 0, @@ -1001,7 +1001,7 @@ static const struct ni_board_struct ni_boards[] = { .ao_range_table = &range_ni_M_625x_ao, .reg_type = ni_reg_625x, .ao_unipolar = 0, - .ao_speed = 357, + .ao_speed = 350, .num_p0_dio_channels = 8, .caldac = {caldac_none}, .has_8255 = 0, @@ -1037,7 +1037,7 @@ static const struct ni_board_struct ni_boards[] = { .ao_range_table = &range_ni_M_625x_ao, .reg_type = ni_reg_625x, .ao_unipolar = 0, - .ao_speed = 357, + .ao_speed = 350, .num_p0_dio_channels = 32, .caldac = {caldac_none}, .has_8255 = 0, @@ -1056,7 +1056,7 @@ static const struct ni_board_struct ni_boards[] = { .ao_range_table = &range_ni_M_625x_ao, .reg_type = ni_reg_625x, .ao_unipolar = 0, - .ao_speed = 357, + .ao_speed = 350, .num_p0_dio_channels = 32, .caldac = {caldac_none}, .has_8255 = 0, @@ -1092,7 +1092,7 @@ static const struct ni_board_struct ni_boards[] = { .ao_range_table = &range_ni_M_628x_ao, .reg_type = ni_reg_628x, .ao_unipolar = 1, - .ao_speed = 357, + .ao_speed = 350, .num_p0_dio_channels = 8, .caldac = {caldac_none}, .has_8255 = 0, @@ -1111,7 +1111,7 @@ static const struct ni_board_struct ni_boards[] = { .ao_range_table = &range_ni_M_628x_ao, .reg_type = ni_reg_628x, .ao_unipolar = 1, - .ao_speed = 357, + .ao_speed = 350, .num_p0_dio_channels = 8, .caldac = {caldac_none}, .has_8255 = 0, @@ -1147,7 +1147,7 @@ static const struct ni_board_struct ni_boards[] = { .ao_range_table = &range_ni_M_628x_ao, .reg_type = ni_reg_628x, .ao_unipolar = 1, - .ao_speed = 357, + .ao_speed = 350, .num_p0_dio_channels = 32, .caldac = {caldac_none}, .has_8255 = 0, -- cgit v1.2.3 From 7d3135af399e92cf4c9bbc5f86b6c140aab3b88c Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Tue, 4 Dec 2012 15:59:55 +0000 Subject: staging: comedi: prevent auto-unconfig of manually configured devices When a low-level comedi driver auto-configures a device, a `struct comedi_dev_file_info` is allocated (as well as a `struct comedi_device`) by `comedi_alloc_board_minor()`. A pointer to the hardware `struct device` is stored as a cookie in the `struct comedi_dev_file_info`. When the low-level comedi driver auto-unconfigures the device, `comedi_auto_unconfig()` uses the cookie to find the `struct comedi_dev_file_info` so it can detach the comedi device from the driver, clean it up and free it. A problem arises if the user manually unconfigures and reconfigures the comedi device using the `COMEDI_DEVCONFIG` ioctl so that is no longer associated with the original hardware device. The problem is that the cookie is not cleared, so that a call to `comedi_auto_unconfig()` from the low-level driver will still find it, detach it, clean it up and free it. Stop this problem occurring by always clearing the `hardware_device` cookie in the `struct comedi_dev_file_info` whenever the `COMEDI_DEVCONFIG` ioctl call is successful. Signed-off-by: Ian Abbott Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/comedi_fops.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index b7bba1790a2..9b038e4a7e7 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -1549,6 +1549,9 @@ static long comedi_unlocked_ioctl(struct file *file, unsigned int cmd, if (cmd == COMEDI_DEVCONFIG) { rc = do_devconfig_ioctl(dev, (struct comedi_devconfig __user *)arg); + if (rc == 0) + /* Evade comedi_auto_unconfig(). */ + dev_file_info->hardware_device = NULL; goto done; } -- cgit v1.2.3 From 34ffb33e09132401872fe79e95c30824ce194d23 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Thu, 3 Jan 2013 12:15:26 +0000 Subject: staging: comedi: Kconfig: COMEDI_NI_AT_A2150 should select COMEDI_FC The 'ni_at_a2150' module links to `cfc_write_to_buffer` in the 'comedi_fc' module, so selecting 'COMEDI_NI_AT_A2150' in the kernel config needs to also select 'COMEDI_FC'. Signed-off-by: Ian Abbott Cc: stable # 3.6+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig index 7de2a10213b..36eec320569 100644 --- a/drivers/staging/comedi/Kconfig +++ b/drivers/staging/comedi/Kconfig @@ -444,6 +444,7 @@ config COMEDI_ADQ12B config COMEDI_NI_AT_A2150 tristate "NI AT-A2150 ISA card support" + select COMEDI_FC depends on VIRT_TO_BUS ---help--- Enable support for National Instruments AT-A2150 cards -- cgit v1.2.3 From c0729eeefdcd76db338f635162bf0739fd2c5f6f Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Fri, 4 Jan 2013 11:33:21 +0000 Subject: staging: comedi: comedi_test: fix race when cancelling command MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Éric Piel reported a kernel oops in the "comedi_test" module. It was a NULL pointer dereference within `waveform_ai_interrupt()` (actually a timer function) that sometimes occurred when a running asynchronous command is cancelled (either by the `COMEDI_CANCEL` ioctl or by closing the device file). This seems to be a race between the caller of `waveform_ai_cancel()` which on return from that function goes and tears down the running command, and the timer function which uses the command. In particular, `async->cmd.chanlist` gets freed (and the pointer set to NULL) by `do_become_nonbusy()` in "comedi_fops.c" but a previously scheduled `waveform_ai_interrupt()` timer function will dereference that pointer regardless, leading to the oops. Fix it by replacing the `del_timer()` call in `waveform_ai_cancel()` with `del_timer_sync()`. Signed-off-by: Ian Abbott Reported-by: Éric Piel Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/comedi_test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/comedi/drivers/comedi_test.c b/drivers/staging/comedi/drivers/comedi_test.c index fb3d09323ba..01de996239f 100644 --- a/drivers/staging/comedi/drivers/comedi_test.c +++ b/drivers/staging/comedi/drivers/comedi_test.c @@ -345,7 +345,7 @@ static int waveform_ai_cancel(struct comedi_device *dev, struct waveform_private *devpriv = dev->private; devpriv->timer_running = 0; - del_timer(&devpriv->timer); + del_timer_sync(&devpriv->timer); return 0; } -- cgit v1.2.3 From fe02508529a937faa7f978d10c7d0565f3879cb0 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Wed, 19 Dec 2012 10:48:46 +0100 Subject: staging: tidspbridge: Fix build breakage due to splitting CM functions. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit ff4ae5d (ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files) resulted in a build breakage for tidspbridge driver. ... CC [M] drivers/staging/tidspbridge/core/tiomap3430.o staging/tidspbridge/core/tiomap3430.c: In function ‘bridge_brd_start’: staging/tidspbridge/core/tiomap3430.c:550:24: error: ‘OMAP3430_CM_AUTOIDLE_PLL’ undeclared (first use in this function) make[3]: *** [drivers/staging/tidspbridge/core/tiomap3430.o] Error 1 ... Fix this by including the appropriate header file. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Greg Kroah-Hartman --- drivers/staging/tidspbridge/core/_tiomap.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/tidspbridge/core/_tiomap.h b/drivers/staging/tidspbridge/core/_tiomap.h index 543a127c7d4..b783bfa59b1 100644 --- a/drivers/staging/tidspbridge/core/_tiomap.h +++ b/drivers/staging/tidspbridge/core/_tiomap.h @@ -31,7 +31,7 @@ * driver should read or write to PRM/CM registers directly; they * should rely on OMAP core code to do this. */ -#include +#include #include #include #include -- cgit v1.2.3 From e16a922a27ec352537a8027cadc32dc156534ca5 Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Mon, 24 Dec 2012 08:10:25 -0600 Subject: staging: tidspbridge: use prepare/unprepare on dsp clocks This solves runtime failures while trying to enable WDT3 related functionality on firmware load, however it does affect other clocks controlled by the driver. Seen on 3.8-rc1. CCF provides clk_prepare and clk_unprepare for enable and disable operations respectively, this needs to be called in the correct order while handling clocks. Code path to enable/disable dsp clocks can still be reached from an atomic context, hence we can't use clk_prepare_enable and clk_disable_unprepare yet. Signed-off-by: Omar Ramirez Luna Signed-off-by: Greg Kroah-Hartman --- drivers/staging/tidspbridge/core/dsp-clock.c | 13 ++++++++++++- drivers/staging/tidspbridge/core/wdt.c | 12 ++++++++++-- 2 files changed, 22 insertions(+), 3 deletions(-) diff --git a/drivers/staging/tidspbridge/core/dsp-clock.c b/drivers/staging/tidspbridge/core/dsp-clock.c index b647207928b..2f084e181d3 100644 --- a/drivers/staging/tidspbridge/core/dsp-clock.c +++ b/drivers/staging/tidspbridge/core/dsp-clock.c @@ -121,9 +121,13 @@ void dsp_clk_exit(void) for (i = 0; i < DM_TIMER_CLOCKS; i++) omap_dm_timer_free(timer[i]); + clk_unprepare(iva2_clk); clk_put(iva2_clk); + clk_unprepare(ssi.sst_fck); clk_put(ssi.sst_fck); + clk_unprepare(ssi.ssr_fck); clk_put(ssi.ssr_fck); + clk_unprepare(ssi.ick); clk_put(ssi.ick); } @@ -145,14 +149,21 @@ void dsp_clk_init(void) iva2_clk = clk_get(&dspbridge_device.dev, "iva2_ck"); if (IS_ERR(iva2_clk)) dev_err(bridge, "failed to get iva2 clock %p\n", iva2_clk); + else + clk_prepare(iva2_clk); ssi.sst_fck = clk_get(&dspbridge_device.dev, "ssi_sst_fck"); ssi.ssr_fck = clk_get(&dspbridge_device.dev, "ssi_ssr_fck"); ssi.ick = clk_get(&dspbridge_device.dev, "ssi_ick"); - if (IS_ERR(ssi.sst_fck) || IS_ERR(ssi.ssr_fck) || IS_ERR(ssi.ick)) + if (IS_ERR(ssi.sst_fck) || IS_ERR(ssi.ssr_fck) || IS_ERR(ssi.ick)) { dev_err(bridge, "failed to get ssi: sst %p, ssr %p, ick %p\n", ssi.sst_fck, ssi.ssr_fck, ssi.ick); + } else { + clk_prepare(ssi.sst_fck); + clk_prepare(ssi.ssr_fck); + clk_prepare(ssi.ick); + } } /** diff --git a/drivers/staging/tidspbridge/core/wdt.c b/drivers/staging/tidspbridge/core/wdt.c index 1dce36fb828..7ff0e6c9803 100644 --- a/drivers/staging/tidspbridge/core/wdt.c +++ b/drivers/staging/tidspbridge/core/wdt.c @@ -63,11 +63,15 @@ int dsp_wdt_init(void) dsp_wdt.fclk = clk_get(NULL, "wdt3_fck"); if (!IS_ERR(dsp_wdt.fclk)) { + clk_prepare(dsp_wdt.fclk); + dsp_wdt.iclk = clk_get(NULL, "wdt3_ick"); if (IS_ERR(dsp_wdt.iclk)) { clk_put(dsp_wdt.fclk); dsp_wdt.fclk = NULL; ret = -EFAULT; + } else { + clk_prepare(dsp_wdt.iclk); } } else ret = -EFAULT; @@ -95,10 +99,14 @@ void dsp_wdt_exit(void) free_irq(INT_34XX_WDT3_IRQ, &dsp_wdt); tasklet_kill(&dsp_wdt.wdt3_tasklet); - if (dsp_wdt.fclk) + if (dsp_wdt.fclk) { + clk_unprepare(dsp_wdt.fclk); clk_put(dsp_wdt.fclk); - if (dsp_wdt.iclk) + } + if (dsp_wdt.iclk) { + clk_unprepare(dsp_wdt.iclk); clk_put(dsp_wdt.iclk); + } dsp_wdt.fclk = NULL; dsp_wdt.iclk = NULL; -- cgit v1.2.3 From 397c60668aa5ae7130b5ad4e73870d7b8a787085 Mon Sep 17 00:00:00 2001 From: Nitin Gupta Date: Wed, 2 Jan 2013 08:53:41 -0800 Subject: staging: zram: fix invalid memory references during disk write Fixes a bug introduced by commit c8f2f0db1 ("zram: Fix handling of incompressible pages") which caused invalid memory references during disk write. Invalid references could occur in two cases: - Incoming data expands on compression: In this case, reference was made to kunmap()'ed bio page. - Partial (non PAGE_SIZE) write with incompressible data: In this case, reference was made to a kfree()'ed buffer. Fixes bug 50081: https://bugzilla.kernel.org/show_bug.cgi?id=50081 Signed-off-by: Nitin Gupta Cc: stable Reported-by: Mihail Kasadjikov Reported-by: Tomas M Reviewed-by: Minchan Kim Signed-off-by: Greg Kroah-Hartman --- drivers/staging/zram/zram_drv.c | 39 ++++++++++++++++++++++++--------------- 1 file changed, 24 insertions(+), 15 deletions(-) diff --git a/drivers/staging/zram/zram_drv.c b/drivers/staging/zram/zram_drv.c index fb4a7c94aed..f2a73bd739f 100644 --- a/drivers/staging/zram/zram_drv.c +++ b/drivers/staging/zram/zram_drv.c @@ -265,7 +265,7 @@ out_cleanup: static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index, int offset) { - int ret; + int ret = 0; size_t clen; unsigned long handle; struct page *page; @@ -286,10 +286,8 @@ static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index, goto out; } ret = zram_decompress_page(zram, uncmem, index); - if (ret) { - kfree(uncmem); + if (ret) goto out; - } } /* @@ -302,16 +300,18 @@ static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index, user_mem = kmap_atomic(page); - if (is_partial_io(bvec)) + if (is_partial_io(bvec)) { memcpy(uncmem + offset, user_mem + bvec->bv_offset, bvec->bv_len); - else + kunmap_atomic(user_mem); + user_mem = NULL; + } else { uncmem = user_mem; + } if (page_zero_filled(uncmem)) { - kunmap_atomic(user_mem); - if (is_partial_io(bvec)) - kfree(uncmem); + if (!is_partial_io(bvec)) + kunmap_atomic(user_mem); zram_stat_inc(&zram->stats.pages_zero); zram_set_flag(zram, index, ZRAM_ZERO); ret = 0; @@ -321,9 +321,11 @@ static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index, ret = lzo1x_1_compress(uncmem, PAGE_SIZE, src, &clen, zram->compress_workmem); - kunmap_atomic(user_mem); - if (is_partial_io(bvec)) - kfree(uncmem); + if (!is_partial_io(bvec)) { + kunmap_atomic(user_mem); + user_mem = NULL; + uncmem = NULL; + } if (unlikely(ret != LZO_E_OK)) { pr_err("Compression failed! err=%d\n", ret); @@ -332,8 +334,10 @@ static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index, if (unlikely(clen > max_zpage_size)) { zram_stat_inc(&zram->stats.bad_compress); - src = uncmem; clen = PAGE_SIZE; + src = NULL; + if (is_partial_io(bvec)) + src = uncmem; } handle = zs_malloc(zram->mem_pool, clen); @@ -345,7 +349,11 @@ static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index, } cmem = zs_map_object(zram->mem_pool, handle, ZS_MM_WO); + if ((clen == PAGE_SIZE) && !is_partial_io(bvec)) + src = kmap_atomic(page); memcpy(cmem, src, clen); + if ((clen == PAGE_SIZE) && !is_partial_io(bvec)) + kunmap_atomic(src); zs_unmap_object(zram->mem_pool, handle); @@ -358,9 +366,10 @@ static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index, if (clen <= PAGE_SIZE / 2) zram_stat_inc(&zram->stats.good_compress); - return 0; - out: + if (is_partial_io(bvec)) + kfree(uncmem); + if (ret) zram_stat64_inc(zram, &zram->stats.failed_writes); return ret; -- cgit v1.2.3