From a698400a1556cf9f0376d1a41e536973dd5c4747 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:41 +0200 Subject: cmd640: fix warm-plug support for the secondary interface Register secondary interface also when user requested not to probe devices. While at it: - remove write-only second_port_toggled variable Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/cmd640.c | 51 ++++++++++++++++++++---------------------------- 1 file changed, 21 insertions(+), 30 deletions(-) diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index baa26a26709..ab7d7274d8b 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -687,9 +687,6 @@ static int cmd640x_init_one(unsigned long base, unsigned long ctl) */ static int __init cmd640x_init(void) { -#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - int second_port_toggled = 0; -#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ int second_port_cmd640 = 0, rc; const char *bus_type, *port2; unsigned int index; @@ -778,46 +775,40 @@ static int __init cmd640x_init(void) put_cmd640_reg(CMDTIM, 0); put_cmd640_reg(BRST, 0x40); - cmd_hwif1 = ide_find_port(); + b = get_cmd640_reg(CNTRL); /* * Try to enable the secondary interface, if not already enabled */ - if (cmd_hwif1 && - cmd_hwif1->drives[0].noprobe && cmd_hwif1->drives[1].noprobe) { - port2 = "not probed"; + if (secondary_port_responding()) { + if ((b & CNTRL_ENA_2ND)) { + second_port_cmd640 = 1; + port2 = "okay"; + } else if (cmd640_vlb) { + second_port_cmd640 = 1; + port2 = "alive"; + } else + port2 = "not cmd640"; } else { - b = get_cmd640_reg(CNTRL); + put_cmd640_reg(CNTRL, b ^ CNTRL_ENA_2ND); /* toggle the bit */ if (secondary_port_responding()) { - if ((b & CNTRL_ENA_2ND)) { - second_port_cmd640 = 1; - port2 = "okay"; - } else if (cmd640_vlb) { - second_port_cmd640 = 1; - port2 = "alive"; - } else - port2 = "not cmd640"; + second_port_cmd640 = 1; + port2 = "enabled"; } else { - put_cmd640_reg(CNTRL, b ^ CNTRL_ENA_2ND); /* toggle the bit */ - if (secondary_port_responding()) { - second_port_cmd640 = 1; -#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - second_port_toggled = 1; -#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ - port2 = "enabled"; - } else { - put_cmd640_reg(CNTRL, b); /* restore original setting */ - port2 = "not responding"; - } + put_cmd640_reg(CNTRL, b); /* restore original setting */ + port2 = "not responding"; } } /* * Initialize data for secondary cmd640 port, if enabled */ - if (second_port_cmd640 && cmd_hwif1) { - ide_init_port_hw(cmd_hwif1, &hw[1]); - idx[1] = cmd_hwif1->index; + if (second_port_cmd640) { + cmd_hwif1 = ide_find_port(); + if (cmd_hwif1) { + ide_init_port_hw(cmd_hwif1, &hw[1]); + idx[1] = cmd_hwif1->index; + } } printk(KERN_INFO "cmd640: %sserialized, secondary interface %s\n", second_port_cmd640 ? "" : "not ", port2); -- cgit v1.2.3