From 613065e53cb191d00d9d4fc377398b656ed05a45 Mon Sep 17 00:00:00 2001 From: Kevin Cernekee Date: Sat, 25 Aug 2012 12:38:52 -0700 Subject: usb: gadget: bcm63xx UDC driver Driver for the "USB20D" / "USBD" block on BCM6328, BCM6368, BCM6816, BCM6362, BCM3383, and others. The hardware block was designed to support networking applications (direct connection of a home router to a PC), and the endpoint configuration is fixed. [ balbi@ti.com : dropped USB_GADGET_DUALSPEED from Kconfig ] Signed-off-by: Kevin Cernekee Acked-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi --- drivers/usb/gadget/Kconfig | 11 + drivers/usb/gadget/Makefile | 1 + drivers/usb/gadget/bcm63xx_udc.c | 2464 +++++++++++++++++++++++++++++++++++++ drivers/usb/gadget/gadget_chips.h | 3 + 4 files changed, 2479 insertions(+) create mode 100644 drivers/usb/gadget/bcm63xx_udc.c diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 2ba0d0e2eed..75b76d5a0fe 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -159,6 +159,17 @@ config USB_ATMEL_USBA USBA is the integrated high-speed USB Device controller on the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel. +config USB_BCM63XX_UDC + tristate "Broadcom BCM63xx Peripheral Controller" + depends on BCM63XX + help + Many Broadcom BCM63xx chipsets (such as the BCM6328) have a + high speed USB Device Port with support for four fixed endpoints + (plus endpoint zero). + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "bcm63xx_udc". + config USB_FSL_USB2 tristate "Freescale Highspeed USB DR Peripheral Controller" depends on FSL_SOC || ARCH_MXC diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 3fd8cd09d2c..d84f92325a7 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_USB_OMAP) += omap_udc.o obj-$(CONFIG_USB_S3C2410) += s3c2410_udc.o obj-$(CONFIG_USB_AT91) += at91_udc.o obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o +obj-$(CONFIG_USB_BCM63XX_UDC) += bcm63xx_udc.o obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o fsl_usb2_udc-y := fsl_udc_core.o fsl_usb2_udc-$(CONFIG_ARCH_MXC) += fsl_mxc_udc.o diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/bcm63xx_udc.c new file mode 100644 index 00000000000..9ca792224cd --- /dev/null +++ b/drivers/usb/gadget/bcm63xx_udc.c @@ -0,0 +1,2464 @@ +/* + * bcm63xx_udc.c -- BCM63xx UDC high/full speed USB device controller + * + * Copyright (C) 2012 Kevin Cernekee + * Copyright (C) 2012 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define DRV_MODULE_NAME "bcm63xx_udc" + +static const char bcm63xx_ep0name[] = "ep0"; +static const char *const bcm63xx_ep_name[] = { + bcm63xx_ep0name, + "ep1in-bulk", "ep2out-bulk", "ep3in-int", "ep4out-int", +}; + +static bool use_fullspeed; +module_param(use_fullspeed, bool, S_IRUGO); +MODULE_PARM_DESC(use_fullspeed, "true for fullspeed only"); + +/* + * RX IRQ coalescing options: + * + * false (default) - one IRQ per DATAx packet. Slow but reliable. The + * driver is able to pass the "testusb" suite and recover from conditions like: + * + * 1) Device queues up a 2048-byte RX IUDMA transaction on an OUT bulk ep + * 2) Host sends 512 bytes of data + * 3) Host decides to reconfigure the device and sends SET_INTERFACE + * 4) Device shuts down the endpoint and cancels the RX transaction + * + * true - one IRQ per transfer, for transfers <= 2048B. Generates + * considerably fewer IRQs, but error recovery is less robust. Does not + * reliably pass "testusb". + * + * TX always uses coalescing, because we can cancel partially complete TX + * transfers by repeatedly flushing the FIFO. The hardware doesn't allow + * this on RX. + */ +static bool irq_coalesce; +module_param(irq_coalesce, bool, S_IRUGO); +MODULE_PARM_DESC(irq_coalesce, "take one IRQ per RX transfer"); + +#define BCM63XX_NUM_EP 5 +#define BCM63XX_NUM_IUDMA 6 +#define BCM63XX_NUM_FIFO_PAIRS 3 + +#define IUDMA_RESET_TIMEOUT_US 10000 + +#define IUDMA_EP0_RXCHAN 0 +#define IUDMA_EP0_TXCHAN 1 + +#define IUDMA_MAX_FRAGMENT 2048 +#define BCM63XX_MAX_CTRL_PKT 64 + +#define BCMEP_CTRL 0x00 +#define BCMEP_ISOC 0x01 +#define BCMEP_BULK 0x02 +#define BCMEP_INTR 0x03 + +#define BCMEP_OUT 0x00 +#define BCMEP_IN 0x01 + +#define BCM63XX_SPD_FULL 1 +#define BCM63XX_SPD_HIGH 0 + +#define IUDMA_DMAC_OFFSET 0x200 +#define IUDMA_DMAS_OFFSET 0x400 + +enum bcm63xx_ep0_state { + EP0_REQUEUE, + EP0_IDLE, + EP0_IN_DATA_PHASE_SETUP, + EP0_IN_DATA_PHASE_COMPLETE, + EP0_OUT_DATA_PHASE_SETUP, + EP0_OUT_DATA_PHASE_COMPLETE, + EP0_OUT_STATUS_PHASE, + EP0_IN_FAKE_STATUS_PHASE, + EP0_SHUTDOWN, +}; + +static const char __maybe_unused bcm63xx_ep0_state_names[][32] = { + "REQUEUE", + "IDLE", + "IN_DATA_PHASE_SETUP", + "IN_DATA_PHASE_COMPLETE", + "OUT_DATA_PHASE_SETUP", + "OUT_DATA_PHASE_COMPLETE", + "OUT_STATUS_PHASE", + "IN_FAKE_STATUS_PHASE", + "SHUTDOWN", +}; + +/** + * struct iudma_ch_cfg - Static configuration for an IUDMA channel. + * @ep_num: USB endpoint number. + * @n_bds: Number of buffer descriptors in the ring. + * @ep_type: Endpoint type (control, bulk, interrupt). + * @dir: Direction (in, out). + * @n_fifo_slots: Number of FIFO entries to allocate for this channel. + * @max_pkt_hs: Maximum packet size in high speed mode. + * @max_pkt_fs: Maximum packet size in full speed mode. + */ +struct iudma_ch_cfg { + int ep_num; + int n_bds; + int ep_type; + int dir; + int n_fifo_slots; + int max_pkt_hs; + int max_pkt_fs; +}; + +static const struct iudma_ch_cfg iudma_defaults[] = { + + /* This controller was designed to support a CDC/RNDIS application. + It may be possible to reconfigure some of the endpoints, but + the hardware limitations (FIFO sizing and number of DMA channels) + may significantly impact flexibility and/or stability. Change + these values at your own risk. + + ep_num ep_type n_fifo_slots max_pkt_fs + idx | n_bds | dir | max_pkt_hs | + | | | | | | | | */ + [0] = { -1, 4, BCMEP_CTRL, BCMEP_OUT, 32, 64, 64 }, + [1] = { 0, 4, BCMEP_CTRL, BCMEP_OUT, 32, 64, 64 }, + [2] = { 2, 16, BCMEP_BULK, BCMEP_OUT, 128, 512, 64 }, + [3] = { 1, 16, BCMEP_BULK, BCMEP_IN, 128, 512, 64 }, + [4] = { 4, 4, BCMEP_INTR, BCMEP_OUT, 32, 64, 64 }, + [5] = { 3, 4, BCMEP_INTR, BCMEP_IN, 32, 64, 64 }, +}; + +struct bcm63xx_udc; + +/** + * struct iudma_ch - Represents the current state of a single IUDMA channel. + * @ch_idx: IUDMA channel index (0 to BCM63XX_NUM_IUDMA-1). + * @ep_num: USB endpoint number. -1 for ep0 RX. + * @enabled: Whether bcm63xx_ep_enable() has been called. + * @max_pkt: "Chunk size" on the USB interface. Based on interface speed. + * @is_tx: true for TX, false for RX. + * @bep: Pointer to the associated endpoint. NULL for ep0 RX. + * @udc: Reference to the device controller. + * @read_bd: Next buffer descriptor to reap from the hardware. + * @write_bd: Next BD available for a new packet. + * @end_bd: Points to the final BD in the ring. + * @n_bds_used: Number of BD entries currently occupied. + * @bd_ring: Base pointer to the BD ring. + * @bd_ring_dma: Physical (DMA) address of bd_ring. + * @n_bds: Total number of BDs in the ring. + * + * ep0 has two IUDMA channels (IUDMA_EP0_RXCHAN and IUDMA_EP0_TXCHAN), as it is + * bidirectional. The "struct usb_ep" associated with ep0 is for TX (IN) + * only. + * + * Each bulk/intr endpoint has a single IUDMA channel and a single + * struct usb_ep. + */ +struct iudma_ch { + unsigned int ch_idx; + int ep_num; + bool enabled; + int max_pkt; + bool is_tx; + struct bcm63xx_ep *bep; + struct bcm63xx_udc *udc; + + struct bcm_enet_desc *read_bd; + struct bcm_enet_desc *write_bd; + struct bcm_enet_desc *end_bd; + int n_bds_used; + + struct bcm_enet_desc *bd_ring; + dma_addr_t bd_ring_dma; + unsigned int n_bds; +}; + +/** + * struct bcm63xx_ep - Internal (driver) state of a single endpoint. + * @ep_num: USB endpoint number. + * @iudma: Pointer to IUDMA channel state. + * @ep: USB gadget layer representation of the EP. + * @udc: Reference to the device controller. + * @queue: Linked list of outstanding requests for this EP. + * @halted: 1 if the EP is stalled; 0 otherwise. + */ +struct bcm63xx_ep { + unsigned int ep_num; + struct iudma_ch *iudma; + struct usb_ep ep; + struct bcm63xx_udc *udc; + struct list_head queue; + unsigned halted:1; +}; + +/** + * struct bcm63xx_req - Internal (driver) state of a single request. + * @queue: Links back to the EP's request list. + * @req: USB gadget layer representation of the request. + * @offset: Current byte offset into the data buffer (next byte to queue). + * @bd_bytes: Number of data bytes in outstanding BD entries. + * @iudma: IUDMA channel used for the request. + */ +struct bcm63xx_req { + struct list_head queue; /* ep's requests */ + struct usb_request req; + unsigned int offset; + unsigned int bd_bytes; + struct iudma_ch *iudma; +}; + +/** + * struct bcm63xx_udc - Driver/hardware private context. + * @lock: Spinlock to mediate access to this struct, and (most) HW regs. + * @dev: Generic Linux device structure. + * @pd: Platform data (board/port info). + * @usbd_clk: Clock descriptor for the USB device block. + * @usbh_clk: Clock descriptor for the USB host block. + * @gadget: USB slave device. + * @driver: Driver for USB slave devices. + * @usbd_regs: Base address of the USBD/USB20D block. + * @iudma_regs: Base address of the USBD's associated IUDMA block. + * @bep: Array of endpoints, including ep0. + * @iudma: Array of all IUDMA channels used by this controller. + * @cfg: USB configuration number, from SET_CONFIGURATION wValue. + * @iface: USB interface number, from SET_INTERFACE wIndex. + * @alt_iface: USB alt interface number, from SET_INTERFACE wValue. + * @ep0_ctrl_req: Request object for bcm63xx_udc-initiated ep0 transactions. + * @ep0_ctrl_buf: Data buffer for ep0_ctrl_req. + * @ep0state: Current state of the ep0 state machine. + * @ep0_wq: Workqueue struct used to wake up the ep0 state machine. + * @wedgemap: Bitmap of wedged endpoints. + * @ep0_req_reset: USB reset is pending. + * @ep0_req_set_cfg: Need to spoof a SET_CONFIGURATION packet. + * @ep0_req_set_iface: Need to spoof a SET_INTERFACE packet. + * @ep0_req_shutdown: Driver is shutting down; requesting ep0 to halt activity. + * @ep0_req_completed: ep0 request has completed; worker has not seen it yet. + * @ep0_reply: Pending reply from gadget driver. + * @ep0_request: Outstanding ep0 request. + * @debugfs_root: debugfs directory: /sys/kernel/debug/. + * @debugfs_usbd: debugfs file "usbd" for controller state. + * @debugfs_iudma: debugfs file "usbd" for IUDMA state. + */ +struct bcm63xx_udc { + spinlock_t lock; + + struct device *dev; + struct bcm63xx_usbd_platform_data *pd; + struct clk *usbd_clk; + struct clk *usbh_clk; + + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + + void __iomem *usbd_regs; + void __iomem *iudma_regs; + + struct bcm63xx_ep bep[BCM63XX_NUM_EP]; + struct iudma_ch iudma[BCM63XX_NUM_IUDMA]; + + int cfg; + int iface; + int alt_iface; + + struct bcm63xx_req ep0_ctrl_req; + u8 *ep0_ctrl_buf; + + int ep0state; + struct work_struct ep0_wq; + + unsigned long wedgemap; + + unsigned ep0_req_reset:1; + unsigned ep0_req_set_cfg:1; + unsigned ep0_req_set_iface:1; + unsigned ep0_req_shutdown:1; + + unsigned ep0_req_completed:1; + struct usb_request *ep0_reply; + struct usb_request *ep0_request; + + struct dentry *debugfs_root; + struct dentry *debugfs_usbd; + struct dentry *debugfs_iudma; +}; + +static const struct usb_ep_ops bcm63xx_udc_ep_ops; + +/*********************************************************************** + * Convenience functions + ***********************************************************************/ + +static inline struct bcm63xx_udc *gadget_to_udc(struct usb_gadget *g) +{ + return container_of(g, struct bcm63xx_udc, gadget); +} + +static inline struct bcm63xx_ep *our_ep(struct usb_ep *ep) +{ + return container_of(ep, struct bcm63xx_ep, ep); +} + +static inline struct bcm63xx_req *our_req(struct usb_request *req) +{ + return container_of(req, struct bcm63xx_req, req); +} + +static inline u32 usbd_readl(struct bcm63xx_udc *udc, u32 off) +{ + return bcm_readl(udc->usbd_regs + off); +} + +static inline void usbd_writel(struct bcm63xx_udc *udc, u32 val, u32 off) +{ + bcm_writel(val, udc->usbd_regs + off); +} + +static inline u32 usb_dma_readl(struct bcm63xx_udc *udc, u32 off) +{ + return bcm_readl(udc->iudma_regs + off); +} + +static inline void usb_dma_writel(struct bcm63xx_udc *udc, u32 val, u32 off) +{ + bcm_writel(val, udc->iudma_regs + off); +} + +static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off) +{ + return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off); +} + +static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off) +{ + bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off); +} + +static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off) +{ + return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off); +} + +static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off) +{ + bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off); +} + +static inline void set_clocks(struct bcm63xx_udc *udc, bool is_enabled) +{ + if (is_enabled) { + clk_enable(udc->usbh_clk); + clk_enable(udc->usbd_clk); + udelay(10); + } else { + clk_disable(udc->usbd_clk); + clk_disable(udc->usbh_clk); + } +} + +/*********************************************************************** + * Low-level IUDMA / FIFO operations + ***********************************************************************/ + +/** + * bcm63xx_ep_dma_select - Helper function to set up the init_sel signal. + * @udc: Reference to the device controller. + * @idx: Desired init_sel value. + * + * The "init_sel" signal is used as a selection index for both endpoints + * and IUDMA channels. Since these do not map 1:1, the use of this signal + * depends on the context. + */ +static void bcm63xx_ep_dma_select(struct bcm63xx_udc *udc, int idx) +{ + u32 val = usbd_readl(udc, USBD_CONTROL_REG); + + val &= ~USBD_CONTROL_INIT_SEL_MASK; + val |= idx << USBD_CONTROL_INIT_SEL_SHIFT; + usbd_writel(udc, val, USBD_CONTROL_REG); +} + +/** + * bcm63xx_set_stall - Enable/disable stall on one endpoint. + * @udc: Reference to the device controller. + * @bep: Endpoint on which to operate. + * @is_stalled: true to enable stall, false to disable. + * + * See notes in bcm63xx_update_wedge() regarding automatic clearing of + * halt/stall conditions. + */ +static void bcm63xx_set_stall(struct bcm63xx_udc *udc, struct bcm63xx_ep *bep, + bool is_stalled) +{ + u32 val; + + val = USBD_STALL_UPDATE_MASK | + (is_stalled ? USBD_STALL_ENABLE_MASK : 0) | + (bep->ep_num << USBD_STALL_EPNUM_SHIFT); + usbd_writel(udc, val, USBD_STALL_REG); +} + +/** + * bcm63xx_fifo_setup - (Re)initialize FIFO boundaries and settings. + * @udc: Reference to the device controller. + * + * These parameters depend on the USB link speed. Settings are + * per-IUDMA-channel-pair. + */ +static void bcm63xx_fifo_setup(struct bcm63xx_udc *udc) +{ + int is_hs = udc->gadget.speed == USB_SPEED_HIGH; + u32 i, val, rx_fifo_slot, tx_fifo_slot; + + /* set up FIFO boundaries and packet sizes; this is done in pairs */ + rx_fifo_slot = tx_fifo_slot = 0; + for (i = 0; i < BCM63XX_NUM_IUDMA; i += 2) { + const struct iudma_ch_cfg *rx_cfg = &iudma_defaults[i]; + const struct iudma_ch_cfg *tx_cfg = &iudma_defaults[i + 1]; + + bcm63xx_ep_dma_select(udc, i >> 1); + + val = (rx_fifo_slot << USBD_RXFIFO_CONFIG_START_SHIFT) | + ((rx_fifo_slot + rx_cfg->n_fifo_slots - 1) << + USBD_RXFIFO_CONFIG_END_SHIFT); + rx_fifo_slot += rx_cfg->n_fifo_slots; + usbd_writel(udc, val, USBD_RXFIFO_CONFIG_REG); + usbd_writel(udc, + is_hs ? rx_cfg->max_pkt_hs : rx_cfg->max_pkt_fs, + USBD_RXFIFO_EPSIZE_REG); + + val = (tx_fifo_slot << USBD_TXFIFO_CONFIG_START_SHIFT) | + ((tx_fifo_slot + tx_cfg->n_fifo_slots - 1) << + USBD_TXFIFO_CONFIG_END_SHIFT); + tx_fifo_slot += tx_cfg->n_fifo_slots; + usbd_writel(udc, val, USBD_TXFIFO_CONFIG_REG); + usbd_writel(udc, + is_hs ? tx_cfg->max_pkt_hs : tx_cfg->max_pkt_fs, + USBD_TXFIFO_EPSIZE_REG); + + usbd_readl(udc, USBD_TXFIFO_EPSIZE_REG); + } +} + +/** + * bcm63xx_fifo_reset_ep - Flush a single endpoint's FIFO. + * @udc: Reference to the device controller. + * @ep_num: Endpoint number. + */ +static void bcm63xx_fifo_reset_ep(struct bcm63xx_udc *udc, int ep_num) +{ + u32 val; + + bcm63xx_ep_dma_select(udc, ep_num); + + val = usbd_readl(udc, USBD_CONTROL_REG); + val |= USBD_CONTROL_FIFO_RESET_MASK; + usbd_writel(udc, val, USBD_CONTROL_REG); + usbd_readl(udc, USBD_CONTROL_REG); +} + +/** + * bcm63xx_fifo_reset - Flush all hardware FIFOs. + * @udc: Reference to the device controller. + */ +static void bcm63xx_fifo_reset(struct bcm63xx_udc *udc) +{ + int i; + + for (i = 0; i < BCM63XX_NUM_FIFO_PAIRS; i++) + bcm63xx_fifo_reset_ep(udc, i); +} + +/** + * bcm63xx_ep_init - Initial (one-time) endpoint initialization. + * @udc: Reference to the device controller. + */ +static void bcm63xx_ep_init(struct bcm63xx_udc *udc) +{ + u32 i, val; + + for (i = 0; i < BCM63XX_NUM_IUDMA; i++) { + const struct iudma_ch_cfg *cfg = &iudma_defaults[i]; + + if (cfg->ep_num < 0) + continue; + + bcm63xx_ep_dma_select(udc, cfg->ep_num); + val = (cfg->ep_type << USBD_EPNUM_TYPEMAP_TYPE_SHIFT) | + ((i >> 1) << USBD_EPNUM_TYPEMAP_DMA_CH_SHIFT); + usbd_writel(udc, val, USBD_EPNUM_TYPEMAP_REG); + } +} + +/** + * bcm63xx_ep_setup - Configure per-endpoint settings. + * @udc: Reference to the device controller. + * + * This needs to be rerun if the speed/cfg/intf/altintf changes. + */ +static void bcm63xx_ep_setup(struct bcm63xx_udc *udc) +{ + u32 val, i; + + usbd_writel(udc, USBD_CSR_SETUPADDR_DEF, USBD_CSR_SETUPADDR_REG); + + for (i = 0; i < BCM63XX_NUM_IUDMA; i++) { + const struct iudma_ch_cfg *cfg = &iudma_defaults[i]; + int max_pkt = udc->gadget.speed == USB_SPEED_HIGH ? + cfg->max_pkt_hs : cfg->max_pkt_fs; + int idx = cfg->ep_num; + + udc->iudma[i].max_pkt = max_pkt; + + if (idx < 0) + continue; + udc->bep[idx].ep.maxpacket = max_pkt; + + val = (idx << USBD_CSR_EP_LOG_SHIFT) | + (cfg->dir << USBD_CSR_EP_DIR_SHIFT) | + (cfg->ep_type << USBD_CSR_EP_TYPE_SHIFT) | + (udc->cfg << USBD_CSR_EP_CFG_SHIFT) | + (udc->iface << USBD_CSR_EP_IFACE_SHIFT) | + (udc->alt_iface << USBD_CSR_EP_ALTIFACE_SHIFT) | + (max_pkt << USBD_CSR_EP_MAXPKT_SHIFT); + usbd_writel(udc, val, USBD_CSR_EP_REG(idx)); + } +} + +/** + * iudma_write - Queue a single IUDMA transaction. + * @udc: Reference to the device controller. + * @iudma: IUDMA channel to use. + * @breq: Request containing the transaction data. + * + * For RX IUDMA, this will queue a single buffer descriptor, as RX IUDMA + * does not honor SOP/EOP so the handling of multiple buffers is ambiguous. + * So iudma_write() may be called several times to fulfill a single + * usb_request. + * + * For TX IUDMA, this can queue multiple buffer descriptors if needed. + */ +static void iudma_write(struct bcm63xx_udc *udc, struct iudma_ch *iudma, + struct bcm63xx_req *breq) +{ + int first_bd = 1, last_bd = 0, extra_zero_pkt = 0; + unsigned int bytes_left = breq->req.length - breq->offset; + const int max_bd_bytes = !irq_coalesce && !iudma->is_tx ? + iudma->max_pkt : IUDMA_MAX_FRAGMENT; + + iudma->n_bds_used = 0; + breq->bd_bytes = 0; + breq->iudma = iudma; + + if ((bytes_left % iudma->max_pkt == 0) && bytes_left && breq->req.zero) + extra_zero_pkt = 1; + + do { + struct bcm_enet_desc *d = iudma->write_bd; + u32 dmaflags = 0; + unsigned int n_bytes; + + if (d == iudma->end_bd) { + dmaflags |= DMADESC_WRAP_MASK; + iudma->write_bd = iudma->bd_ring; + } else { + iudma->write_bd++; + } + iudma->n_bds_used++; + + n_bytes = min_t(int, bytes_left, max_bd_bytes); + if (n_bytes) + dmaflags |= n_bytes << DMADESC_LENGTH_SHIFT; + else + dmaflags |= (1 << DMADESC_LENGTH_SHIFT) | + DMADESC_USB_ZERO_MASK; + + dmaflags |= DMADESC_OWNER_MASK; + if (first_bd) { + dmaflags |= DMADESC_SOP_MASK; + first_bd = 0; + } + + /* + * extra_zero_pkt forces one more iteration through the loop + * after all data is queued up, to send the zero packet + */ + if (extra_zero_pkt && !bytes_left) + extra_zero_pkt = 0; + + if (!iudma->is_tx || iudma->n_bds_used == iudma->n_bds || + (n_bytes == bytes_left && !extra_zero_pkt)) { + last_bd = 1; + dmaflags |= DMADESC_EOP_MASK; + } + + d->address = breq->req.dma + breq->offset; + mb(); + d->len_stat = dmaflags; + + breq->offset += n_bytes; + breq->bd_bytes += n_bytes; + bytes_left -= n_bytes; + } while (!last_bd); + + usb_dmac_writel(udc, ENETDMAC_CHANCFG_EN_MASK, + ENETDMAC_CHANCFG_REG(iudma->ch_idx)); +} + +/** + * iudma_read - Check for IUDMA buffer completion. + * @udc: Reference to the device controller. + * @iudma: IUDMA channel to use. + * + * This checks to see if ALL of the outstanding BDs on the DMA channel + * have been filled. If so, it returns the actual transfer length; + * otherwise it returns -EBUSY. + */ +static int iudma_read(struct bcm63xx_udc *udc, struct iudma_ch *iudma) +{ + int i, actual_len = 0; + struct bcm_enet_desc *d = iudma->read_bd; + + if (!iudma->n_bds_used) + return -EINVAL; + + for (i = 0; i < iudma->n_bds_used; i++) { + u32 dmaflags; + + dmaflags = d->len_stat; + + if (dmaflags & DMADESC_OWNER_MASK) + return -EBUSY; + + actual_len += (dmaflags & DMADESC_LENGTH_MASK) >> + DMADESC_LENGTH_SHIFT; + if (d == iudma->end_bd) + d = iudma->bd_ring; + else + d++; + } + + iudma->read_bd = d; + iudma->n_bds_used = 0; + return actual_len; +} + +/** + * iudma_reset_channel - Stop DMA on a single channel. + * @udc: Reference to the device controller. + * @iudma: IUDMA channel to reset. + */ +static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma) +{ + int timeout = IUDMA_RESET_TIMEOUT_US; + struct bcm_enet_desc *d; + int ch_idx = iudma->ch_idx; + + if (!iudma->is_tx) + bcm63xx_fifo_reset_ep(udc, max(0, iudma->ep_num)); + + /* stop DMA, then wait for the hardware to wrap up */ + usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG(ch_idx)); + + while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)) & + ENETDMAC_CHANCFG_EN_MASK) { + udelay(1); + + /* repeatedly flush the FIFO data until the BD completes */ + if (iudma->is_tx && iudma->ep_num >= 0) + bcm63xx_fifo_reset_ep(udc, iudma->ep_num); + + if (!timeout--) { + dev_err(udc->dev, "can't reset IUDMA channel %d\n", + ch_idx); + break; + } + if (timeout == IUDMA_RESET_TIMEOUT_US / 2) { + dev_warn(udc->dev, "forcibly halting IUDMA channel %d\n", + ch_idx); + usb_dmac_writel(udc, ENETDMAC_CHANCFG_BUFHALT_MASK, + ENETDMAC_CHANCFG_REG(ch_idx)); + } + } + usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG(ch_idx)); + + /* don't leave "live" HW-owned entries for the next guy to step on */ + for (d = iudma->bd_ring; d <= iudma->end_bd; d++) + d->len_stat = 0; + mb(); + + iudma->read_bd = iudma->write_bd = iudma->bd_ring; + iudma->n_bds_used = 0; + + /* set up IRQs, UBUS burst size, and BD base for this channel */ + usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK, + ENETDMAC_IRMASK_REG(ch_idx)); + usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG(ch_idx)); + + usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG(ch_idx)); + usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG(ch_idx)); +} + +/** + * iudma_init_channel - One-time IUDMA channel initialization. + * @udc: Reference to the device controller. + * @ch_idx: Channel to initialize. + */ +static int iudma_init_channel(struct bcm63xx_udc *udc, unsigned int ch_idx) +{ + struct iudma_ch *iudma = &udc->iudma[ch_idx]; + const struct iudma_ch_cfg *cfg = &iudma_defaults[ch_idx]; + unsigned int n_bds = cfg->n_bds; + struct bcm63xx_ep *bep = NULL; + + iudma->ep_num = cfg->ep_num; + iudma->ch_idx = ch_idx; + iudma->is_tx = !!(ch_idx & 0x01); + if (iudma->ep_num >= 0) { + bep = &udc->bep[iudma->ep_num]; + bep->iudma = iudma; + INIT_LIST_HEAD(&bep->queue); + } + + iudma->bep = bep; + iudma->udc = udc; + + /* ep0 is always active; others are controlled by the gadget driver */ + if (iudma->ep_num <= 0) + iudma->enabled = true; + + iudma->n_bds = n_bds; + iudma->bd_ring = dmam_alloc_coherent(udc->dev, + n_bds * sizeof(struct bcm_enet_desc), + &iudma->bd_ring_dma, GFP_KERNEL); + if (!iudma->bd_ring) + return -ENOMEM; + iudma->end_bd = &iudma->bd_ring[n_bds - 1]; + + return 0; +} + +/** + * iudma_init - One-time initialization of all IUDMA channels. + * @udc: Reference to the device controller. + * + * Enable DMA, flush channels, and enable global IUDMA IRQs. + */ +static int iudma_init(struct bcm63xx_udc *udc) +{ + int i, rc; + + usb_dma_writel(udc, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG); + + for (i = 0; i < BCM63XX_NUM_IUDMA; i++) { + rc = iudma_init_channel(udc, i); + if (rc) + return rc; + iudma_reset_channel(udc, &udc->iudma[i]); + } + + usb_dma_writel(udc, BIT(BCM63XX_NUM_IUDMA)-1, ENETDMA_GLB_IRQMASK_REG); + return 0; +} + +/** + * iudma_uninit - Uninitialize IUDMA channels. + * @udc: Reference to the device controller. + * + * Kill global IUDMA IRQs, flush channels, and kill DMA. + */ +static void iudma_uninit(struct bcm63xx_udc *udc) +{ + int i; + + usb_dma_writel(udc, 0, ENETDMA_GLB_IRQMASK_REG); + + for (i = 0; i < BCM63XX_NUM_IUDMA; i++) + iudma_reset_channel(udc, &udc->iudma[i]); + + usb_dma_writel(udc, 0, ENETDMA_CFG_REG); +} + +/*********************************************************************** + * Other low-level USBD operations + ***********************************************************************/ + +/** + * bcm63xx_set_ctrl_irqs - Mask/unmask control path interrupts. + * @udc: Reference to the device controller. + * @enable_irqs: true to enable, false to disable. + */ +static void bcm63xx_set_ctrl_irqs(struct bcm63xx_udc *udc, bool enable_irqs) +{ + u32 val; + + usbd_writel(udc, 0, USBD_STATUS_REG); + + val = BIT(USBD_EVENT_IRQ_USB_RESET) | + BIT(USBD_EVENT_IRQ_SETUP) | + BIT(USBD_EVENT_IRQ_SETCFG) | + BIT(USBD_EVENT_IRQ_SETINTF) | + BIT(USBD_EVENT_IRQ_USB_LINK); + usbd_writel(udc, enable_irqs ? val : 0, USBD_EVENT_IRQ_MASK_REG); + usbd_writel(udc, val, USBD_EVENT_IRQ_STATUS_REG); +} + +/** + * bcm63xx_select_phy_mode - Select between USB device and host mode. + * @udc: Reference to the device controller. + * @is_device: true for device, false for host. + * + * This should probably be reworked to use the drivers/usb/otg + * infrastructure. + * + * By default, the AFE/pullups are disabled in device mode, until + * bcm63xx_select_pullup() is called. + */ +static void bcm63xx_select_phy_mode(struct bcm63xx_udc *udc, bool is_device) +{ + u32 val, portmask = BIT(udc->pd->port_no); + + if (BCMCPU_IS_6328()) { + /* configure pinmux to sense VBUS signal */ + val = bcm_gpio_readl(GPIO_PINMUX_OTHR_REG); + val &= ~GPIO_PINMUX_OTHR_6328_USB_MASK; + val |= is_device ? GPIO_PINMUX_OTHR_6328_USB_DEV : + GPIO_PINMUX_OTHR_6328_USB_HOST; + bcm_gpio_writel(val, GPIO_PINMUX_OTHR_REG); + } + + val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG); + if (is_device) { + val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT); + val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); + } else { + val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT); + val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); + } + bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG); + + val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG); + if (is_device) + val |= USBH_PRIV_SWAP_USBD_MASK; + else + val &= ~USBH_PRIV_SWAP_USBD_MASK; + bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG); +} + +/** + * bcm63xx_select_pullup - Enable/disable the pullup on D+ + * @udc: Reference to the device controller. + * @is_on: true to enable the pullup, false to disable. + * + * If the pullup is active, the host will sense a FS/HS device connected to + * the port. If the pullup is inactive, the host will think the USB + * device has been disconnected. + */ +static void bcm63xx_select_pullup(struct bcm63xx_udc *udc, bool is_on) +{ + u32 val, portmask = BIT(udc->pd->port_no); + + val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG); + if (is_on) + val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); + else + val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); + bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG); +} + +/** + * bcm63xx_uninit_udc_hw - Shut down the hardware prior to driver removal. + * @udc: Reference to the device controller. + * + * This just masks the IUDMA IRQs and releases the clocks. It is assumed + * that bcm63xx_udc_stop() has already run, and the clocks are stopped. + */ +static void bcm63xx_uninit_udc_hw(struct bcm63xx_udc *udc) +{ + set_clocks(udc, true); + iudma_uninit(udc); + set_clocks(udc, false); + + clk_put(udc->usbd_clk); + clk_put(udc->usbh_clk); +} + +/** + * bcm63xx_init_udc_hw - Initialize the controller hardware and data structures. + * @udc: Reference to the device controller. + */ +static int bcm63xx_init_udc_hw(struct bcm63xx_udc *udc) +{ + int i, rc = 0; + u32 val; + + udc->ep0_ctrl_buf = devm_kzalloc(udc->dev, BCM63XX_MAX_CTRL_PKT, + GFP_KERNEL); + if (!udc->ep0_ctrl_buf) + return -ENOMEM; + + INIT_LIST_HEAD(&udc->gadget.ep_list); + for (i = 0; i < BCM63XX_NUM_EP; i++) { + struct bcm63xx_ep *bep = &udc->bep[i]; + + bep->ep.name = bcm63xx_ep_name[i]; + bep->ep_num = i; + bep->ep.ops = &bcm63xx_udc_ep_ops; + list_add_tail(&bep->ep.ep_list, &udc->gadget.ep_list); + bep->halted = 0; + bep->ep.maxpacket = BCM63XX_MAX_CTRL_PKT; + bep->udc = udc; + bep->ep.desc = NULL; + INIT_LIST_HEAD(&bep->queue); + } + + udc->gadget.ep0 = &udc->bep[0].ep; + list_del(&udc->bep[0].ep.ep_list); + + udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->ep0state = EP0_SHUTDOWN; + + udc->usbh_clk = clk_get(udc->dev, "usbh"); + if (IS_ERR(udc->usbh_clk)) + return -EIO; + + udc->usbd_clk = clk_get(udc->dev, "usbd"); + if (IS_ERR(udc->usbd_clk)) { + clk_put(udc->usbh_clk); + return -EIO; + } + + set_clocks(udc, true); + + val = USBD_CONTROL_AUTO_CSRS_MASK | + USBD_CONTROL_DONE_CSRS_MASK | + (irq_coalesce ? USBD_CONTROL_RXZSCFG_MASK : 0); + usbd_writel(udc, val, USBD_CONTROL_REG); + + val = USBD_STRAPS_APP_SELF_PWR_MASK | + USBD_STRAPS_APP_RAM_IF_MASK | + USBD_STRAPS_APP_CSRPRGSUP_MASK | + USBD_STRAPS_APP_8BITPHY_MASK | + USBD_STRAPS_APP_RMTWKUP_MASK; + + if (udc->gadget.max_speed == USB_SPEED_HIGH) + val |= (BCM63XX_SPD_HIGH << USBD_STRAPS_SPEED_SHIFT); + else + val |= (BCM63XX_SPD_FULL << USBD_STRAPS_SPEED_SHIFT); + usbd_writel(udc, val, USBD_STRAPS_REG); + + bcm63xx_set_ctrl_irqs(udc, false); + + usbd_writel(udc, 0, USBD_EVENT_IRQ_CFG_LO_REG); + + val = USBD_EVENT_IRQ_CFG_FALLING(USBD_EVENT_IRQ_ENUM_ON) | + USBD_EVENT_IRQ_CFG_FALLING(USBD_EVENT_IRQ_SET_CSRS); + usbd_writel(udc, val, USBD_EVENT_IRQ_CFG_HI_REG); + + rc = iudma_init(udc); + set_clocks(udc, false); + if (rc) + bcm63xx_uninit_udc_hw(udc); + + return 0; +} + +/*********************************************************************** + * Standard EP gadget operations + ***********************************************************************/ + +/** + * bcm63xx_ep_enable - Enable one endpoint. + * @ep: Endpoint to enable. + * @desc: Contains max packet, direction, etc. + * + * Most of the endpoint parameters are fixed in this controller, so there + * isn't much for this function to do. + */ +static int bcm63xx_ep_enable(struct usb_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + struct bcm63xx_ep *bep = our_ep(ep); + struct bcm63xx_udc *udc = bep->udc; + struct iudma_ch *iudma = bep->iudma; + unsigned long flags; + + if (!ep || !desc || ep->name == bcm63xx_ep0name) + return -EINVAL; + + if (!udc->driver) + return -ESHUTDOWN; + + spin_lock_irqsave(&udc->lock, flags); + if (iudma->enabled) { + spin_unlock_irqrestore(&udc->lock, flags); + return -EINVAL; + } + + iudma->enabled = true; + BUG_ON(!list_empty(&bep->queue)); + + iudma_reset_channel(udc, iudma); + + bep->halted = 0; + bcm63xx_set_stall(udc, bep, false); + clear_bit(bep->ep_num, &udc->wedgemap); + + ep->desc = desc; + ep->maxpacket = usb_endpoint_maxp(desc); + + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +/** + * bcm63xx_ep_disable - Disable one endpoint. + * @ep: Endpoint to disable. + */ +static int bcm63xx_ep_disable(struct usb_ep *ep) +{ + struct bcm63xx_ep *bep = our_ep(ep); + struct bcm63xx_udc *udc = bep->udc; + struct iudma_ch *iudma = bep->iudma; + struct list_head *pos, *n; + unsigned long flags; + + if (!ep || !ep->desc) + return -EINVAL; + + spin_lock_irqsave(&udc->lock, flags); + if (!iudma->enabled) { + spin_unlock_irqrestore(&udc->lock, flags); + return -EINVAL; + } + iudma->enabled = false; + + iudma_reset_channel(udc, iudma); + + if (!list_empty(&bep->queue)) { + list_for_each_safe(pos, n, &bep->queue) { + struct bcm63xx_req *breq = + list_entry(pos, struct bcm63xx_req, queue); + + usb_gadget_unmap_request(&udc->gadget, &breq->req, + iudma->is_tx); + list_del(&breq->queue); + breq->req.status = -ESHUTDOWN; + + spin_unlock_irqrestore(&udc->lock, flags); + breq->req.complete(&iudma->bep->ep, &breq->req); + spin_lock_irqsave(&udc->lock, flags); + } + } + ep->desc = NULL; + + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +/** + * bcm63xx_udc_alloc_request - Allocate a new request. + * @ep: Endpoint associated with the request. + * @mem_flags: Flags to pass to kzalloc(). + */ +static struct usb_request *bcm63xx_udc_alloc_request(struct usb_ep *ep, + gfp_t mem_flags) +{ + struct bcm63xx_req *breq; + + breq = kzalloc(sizeof(*breq), mem_flags); + if (!breq) + return NULL; + return &breq->req; +} + +/** + * bcm63xx_udc_free_request - Free a request. + * @ep: Endpoint associated with the request. + * @req: Request to free. + */ +static void bcm63xx_udc_free_request(struct usb_ep *ep, + struct usb_request *req) +{ + struct bcm63xx_req *breq = our_req(req); + kfree(breq); +} + +/** + * bcm63xx_udc_queue - Queue up a new request. + * @ep: Endpoint associated with the request. + * @req: Request to add. + * @mem_flags: Unused. + * + * If the queue is empty, start this request immediately. Otherwise, add + * it to the list. + * + * ep0 replies are sent through this function from the gadget driver, but + * they are treated differently because they need to be handled by the ep0 + * state machine. (Sometimes they are replies to control requests that + * were spoofed by this driver, and so they shouldn't be transmitted at all.) + */ +static int bcm63xx_udc_queue(struct usb_ep *ep, struct usb_request *req, + gfp_t mem_flags) +{ + struct bcm63xx_ep *bep = our_ep(ep); + struct bcm63xx_udc *udc = bep->udc; + struct bcm63xx_req *breq = our_req(req); + unsigned long flags; + int rc = 0; + + if (unlikely(!req || !req->complete || !req->buf || !ep)) + return -EINVAL; + + req->actual = 0; + req->status = 0; + breq->offset = 0; + + if (bep == &udc->bep[0]) { + /* only one reply per request, please */ + if (udc->ep0_reply) + return -EINVAL; + + udc->ep0_reply = req; + schedule_work(&udc->ep0_wq); + return 0; + } + + spin_lock_irqsave(&udc->lock, flags); + if (!bep->iudma->enabled) { + rc = -ESHUTDOWN; + goto out; + } + + rc = usb_gadget_map_request(&udc->gadget, req, bep->iudma->is_tx); + if (rc == 0) { + list_add_tail(&breq->queue, &bep->queue); + if (list_is_singular(&bep->queue)) + iudma_write(udc, bep->iudma, breq); + } + +out: + spin_unlock_irqrestore(&udc->lock, flags); + return rc; +} + +/** + * bcm63xx_udc_dequeue - Remove a pending request from the queue. + * @ep: Endpoint associated with the request. + * @req: Request to remove. + * + * If the request is not at the head of the queue, this is easy - just nuke + * it. If the request is at the head of the queue, we'll need to stop the + * DMA transaction and then queue up the successor. + */ +static int bcm63xx_udc_dequeue(struct usb_ep *ep, struct usb_request *req) +{ + struct bcm63xx_ep *bep = our_ep(ep); + struct bcm63xx_udc *udc = bep->udc; + struct bcm63xx_req *breq = our_req(req), *cur; + unsigned long flags; + int rc = 0; + + spin_lock_irqsave(&udc->lock, flags); + if (list_empty(&bep->queue)) { + rc = -EINVAL; + goto out; + } + + cur = list_first_entry(&bep->queue, struct bcm63xx_req, queue); + usb_gadget_unmap_request(&udc->gadget, &breq->req, bep->iudma->is_tx); + + if (breq == cur) { + iudma_reset_channel(udc, bep->iudma); + list_del(&breq->queue); + + if (!list_empty(&bep->queue)) { + struct bcm63xx_req *next; + + next = list_first_entry(&bep->queue, + struct bcm63xx_req, queue); + iudma_write(udc, bep->iudma, next); + } + } else { + list_del(&breq->queue); + } + +out: + spin_unlock_irqrestore(&udc->lock, flags); + + req->status = -ESHUTDOWN; + req->complete(ep, req); + + return rc; +} + +/** + * bcm63xx_udc_set_halt - Enable/disable STALL flag in the hardware. + * @ep: Endpoint to halt. + * @value: Zero to clear halt; nonzero to set halt. + * + * See comments in bcm63xx_update_wedge(). + */ +static int bcm63xx_udc_set_halt(struct usb_ep *ep, int value) +{ + struct bcm63xx_ep *bep = our_ep(ep); + struct bcm63xx_udc *udc = bep->udc; + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + bcm63xx_set_stall(udc, bep, !!value); + bep->halted = value; + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +/** + * bcm63xx_udc_set_wedge - Stall the endpoint until the next reset. + * @ep: Endpoint to wedge. + * + * See comments in bcm63xx_update_wedge(). + */ +static int bcm63xx_udc_set_wedge(struct usb_ep *ep) +{ + struct bcm63xx_ep *bep = our_ep(ep); + struct bcm63xx_udc *udc = bep->udc; + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + set_bit(bep->ep_num, &udc->wedgemap); + bcm63xx_set_stall(udc, bep, true); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static const struct usb_ep_ops bcm63xx_udc_ep_ops = { + .enable = bcm63xx_ep_enable, + .disable = bcm63xx_ep_disable, + + .alloc_request = bcm63xx_udc_alloc_request, + .free_request = bcm63xx_udc_free_request, + + .queue = bcm63xx_udc_queue, + .dequeue = bcm63xx_udc_dequeue, + + .set_halt = bcm63xx_udc_set_halt, + .set_wedge = bcm63xx_udc_set_wedge, +}; + +/*********************************************************************** + * EP0 handling + ***********************************************************************/ + +/** + * bcm63xx_ep0_setup_callback - Drop spinlock to invoke ->setup callback. + * @udc: Reference to the device controller. + * @ctrl: 8-byte SETUP request. + */ +static int bcm63xx_ep0_setup_callback(struct bcm63xx_udc *udc, + struct usb_ctrlrequest *ctrl) +{ + int rc; + + spin_unlock_irq(&udc->lock); + rc = udc->driver->setup(&udc->gadget, ctrl); + spin_lock_irq(&udc->lock); + return rc; +} + +/** + * bcm63xx_ep0_spoof_set_cfg - Synthesize a SET_CONFIGURATION request. + * @udc: Reference to the device controller. + * + * Many standard requests are handled automatically in the hardware, but + * we still need to pass them to the gadget driver so that it can + * reconfigure the interfaces/endpoints if necessary. + * + * Unfortunately we are not able to send a STALL response if the host + * requests an invalid configuration. If this happens, we'll have to be + * content with printing a warning. + */ +static int bcm63xx_ep0_spoof_set_cfg(struct bcm63xx_udc *udc) +{ + struct usb_ctrlrequest ctrl; + int rc; + + ctrl.bRequestType = USB_DIR_OUT | USB_RECIP_DEVICE; + ctrl.bRequest = USB_REQ_SET_CONFIGURATION; + ctrl.wValue = cpu_to_le16(udc->cfg); + ctrl.wIndex = 0; + ctrl.wLength = 0; + + rc = bcm63xx_ep0_setup_callback(udc, &ctrl); + if (rc < 0) { + dev_warn_ratelimited(udc->dev, + "hardware auto-acked bad SET_CONFIGURATION(%d) request\n", + udc->cfg); + } + return rc; +} + +/** + * bcm63xx_ep0_spoof_set_iface - Synthesize a SET_INTERFACE request. + * @udc: Reference to the device controller. + */ +static int bcm63xx_ep0_spoof_set_iface(struct bcm63xx_udc *udc) +{ + struct usb_ctrlrequest ctrl; + int rc; + + ctrl.bRequestType = USB_DIR_OUT | USB_RECIP_INTERFACE; + ctrl.bRequest = USB_REQ_SET_INTERFACE; + ctrl.wValue = cpu_to_le16(udc->alt_iface); + ctrl.wIndex = cpu_to_le16(udc->iface); + ctrl.wLength = 0; + + rc = bcm63xx_ep0_setup_callback(udc, &ctrl); + if (rc < 0) { + dev_warn_ratelimited(udc->dev, + "hardware auto-acked bad SET_INTERFACE(%d,%d) request\n", + udc->iface, udc->alt_iface); + } + return rc; +} + +/** + * bcm63xx_ep0_map_write - dma_map and iudma_write a single request. + * @udc: Reference to the device controller. + * @ch_idx: IUDMA channel number. + * @req: USB gadget layer representation of the request. + */ +static void bcm63xx_ep0_map_write(struct bcm63xx_udc *udc, int ch_idx, + struct usb_request *req) +{ + struct bcm63xx_req *breq = our_req(req); + struct iudma_ch *iudma = &udc->iudma[ch_idx]; + + BUG_ON(udc->ep0_request); + udc->ep0_request = req; + + req->actual = 0; + breq->offset = 0; + usb_gadget_map_request(&udc->gadget, req, iudma->is_tx); + iudma_write(udc, iudma, breq); +} + +/** + * bcm63xx_ep0_complete - Set completion status and "stage" the callback. + * @udc: Reference to the device controller. + * @req: USB gadget layer representation of the request. + * @status: Status to return to the gadget driver. + */ +static void bcm63xx_ep0_complete(struct bcm63xx_udc *udc, + struct usb_request *req, int status) +{ + req->status = status; + if (status) + req->actual = 0; + if (req->complete) { + spin_unlock_irq(&udc->lock); + req->complete(&udc->bep[0].ep, req); + spin_lock_irq(&udc->lock); + } +} + +/** + * bcm63xx_ep0_nuke_reply - Abort request from the gadget driver due to + * reset/shutdown. + * @udc: Reference to the device controller. + * @is_tx: Nonzero for TX (IN), zero for RX (OUT). + */ +static void bcm63xx_ep0_nuke_reply(struct bcm63xx_udc *udc, int is_tx) +{ + struct usb_request *req = udc->ep0_reply; + + udc->ep0_reply = NULL; + usb_gadget_unmap_request(&udc->gadget, req, is_tx); + if (udc->ep0_request == req) { + udc->ep0_req_completed = 0; + udc->ep0_request = NULL; + } + bcm63xx_ep0_complete(udc, req, -ESHUTDOWN); +} + +/** + * bcm63xx_ep0_read_complete - Close out the pending ep0 request; return + * transfer len. + * @udc: Reference to the device controller. + */ +static int bcm63xx_ep0_read_complete(struct bcm63xx_udc *udc) +{ + struct usb_request *req = udc->ep0_request; + + udc->ep0_req_completed = 0; + udc->ep0_request = NULL; + + return req->actual; +} + +/** + * bcm63xx_ep0_internal_request - Helper function to submit an ep0 request. + * @udc: Reference to the device controller. + * @ch_idx: IUDMA channel number. + * @length: Number of bytes to TX/RX. + * + * Used for simple transfers performed by the ep0 worker. This will always + * use ep0_ctrl_req / ep0_ctrl_buf. + */ +static void bcm63xx_ep0_internal_request(struct bcm63xx_udc *udc, int ch_idx, + int length) +{ + struct usb_request *req = &udc->ep0_ctrl_req.req; + + req->buf = udc->ep0_ctrl_buf; + req->length = length; + req->complete = NULL; + + bcm63xx_ep0_map_write(udc, ch_idx, req); +} + +/** + * bcm63xx_ep0_do_setup - Parse new SETUP packet and decide how to handle it. + * @udc: Reference to the device controller. + * + * EP0_IDLE probably shouldn't ever happen. EP0_REQUEUE means we're ready + * for the next packet. Anything else means the transaction requires multiple + * stages of handling. + */ +static enum bcm63xx_ep0_state bcm63xx_ep0_do_setup(struct bcm63xx_udc *udc) +{ + int rc; + struct usb_ctrlrequest *ctrl = (void *)udc->ep0_ctrl_buf; + + rc = bcm63xx_ep0_read_complete(udc); + + if (rc < 0) { + dev_err(udc->dev, "missing SETUP packet\n"); + return EP0_IDLE; + } + + /* + * Handle 0-byte IN STATUS acknowledgement. The hardware doesn't + * ALWAYS deliver these 100% of the time, so if we happen to see one, + * just throw it away. + */ + if (rc == 0) + return EP0_REQUEUE; + + /* Drop malformed SETUP packets */ + if (rc != sizeof(*ctrl)) { + dev_warn_ratelimited(udc->dev, + "malformed SETUP packet (%d bytes)\n", rc); + return EP0_REQUEUE; + } + + /* Process new SETUP packet arriving on ep0 */ + rc = bcm63xx_ep0_setup_callback(udc, ctrl); + if (rc < 0) { + bcm63xx_set_stall(udc, &udc->bep[0], true); + return EP0_REQUEUE; + } + + if (!ctrl->wLength) + return EP0_REQUEUE; + else if (ctrl->bRequestType & USB_DIR_IN) + return EP0_IN_DATA_PHASE_SETUP; + else + return EP0_OUT_DATA_PHASE_SETUP; +} + +/** + * bcm63xx_ep0_do_idle - Check for outstanding requests if ep0 is idle. + * @udc: Reference to the device controller. + * + * In state EP0_IDLE, the RX descriptor is either pending, or has been + * filled with a SETUP packet from the host. This function handles new + * SETUP packets, control IRQ events (which can generate fake SETUP packets), + * and reset/shutdown events. + * + * Returns 0 if work was done; -EAGAIN if nothing to do. + */ +static int bcm63xx_ep0_do_idle(struct bcm63xx_udc *udc) +{ + if (udc->ep0_req_reset) { + udc->ep0_req_reset = 0; + } else if (udc->ep0_req_set_cfg) { + udc->ep0_req_set_cfg = 0; + if (bcm63xx_ep0_spoof_set_cfg(udc) >= 0) + udc->ep0state = EP0_IN_FAKE_STATUS_PHASE; + } else if (udc->ep0_req_set_iface) { + udc->ep0_req_set_iface = 0; + if (bcm63xx_ep0_spoof_set_iface(udc) >= 0) + udc->ep0state = EP0_IN_FAKE_STATUS_PHASE; + } else if (udc->ep0_req_completed) { + udc->ep0state = bcm63xx_ep0_do_setup(udc); + return udc->ep0state == EP0_IDLE ? -EAGAIN : 0; + } else if (udc->ep0_req_shutdown) { + udc->ep0_req_shutdown = 0; + udc->ep0_req_completed = 0; + udc->ep0_request = NULL; + iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_RXCHAN]); + usb_gadget_unmap_request(&udc->gadget, + &udc->ep0_ctrl_req.req, 0); + + /* bcm63xx_udc_pullup() is waiting for this */ + mb(); + udc->ep0state = EP0_SHUTDOWN; + } else if (udc->ep0_reply) { + /* + * This could happen if a USB RESET shows up during an ep0 + * transaction (especially if a laggy driver like gadgetfs + * is in use). + */ + dev_warn(udc->dev, "nuking unexpected reply\n"); + bcm63xx_ep0_nuke_reply(udc, 0); + } else { + return -EAGAIN; + } + + return 0; +} + +/** + * bcm63xx_ep0_one_round - Handle the current ep0 state. + * @udc: Reference to the device controller. + * + * Returns 0 if work was done; -EAGAIN if nothing to do. + */ +static int bcm63xx_ep0_one_round(struct bcm63xx_udc *udc) +{ + enum bcm63xx_ep0_state ep0state = udc->ep0state; + bool shutdown = udc->ep0_req_reset || udc->ep0_req_shutdown; + + switch (udc->ep0state) { + case EP0_REQUEUE: + /* set up descriptor to receive SETUP packet */ + bcm63xx_ep0_internal_request(udc, IUDMA_EP0_RXCHAN, + BCM63XX_MAX_CTRL_PKT); + ep0state = EP0_IDLE; + break; + case EP0_IDLE: + return bcm63xx_ep0_do_idle(udc); + case EP0_IN_DATA_PHASE_SETUP: + /* + * Normal case: TX request is in ep0_reply (queued by the + * callback), or will be queued shortly. When it's here, + * send it to the HW and go to EP0_IN_DATA_PHASE_COMPLETE. + * + * Shutdown case: Stop waiting for the reply. Just + * REQUEUE->IDLE. The gadget driver is NOT expected to + * queue anything else now. + */ + if (udc->ep0_reply) { + bcm63xx_ep0_map_write(udc, IUDMA_EP0_TXCHAN, + udc->ep0_reply); + ep0state = EP0_IN_DATA_PHASE_COMPLETE; + } else if (shutdown) { + ep0state = EP0_REQUEUE; + } + break; + case EP0_IN_DATA_PHASE_COMPLETE: { + /* + * Normal case: TX packet (ep0_reply) is in flight; wait for + * it to finish, then go back to REQUEUE->IDLE. + * + * Shutdown case: Reset the TX channel, send -ESHUTDOWN + * completion to the gadget driver, then REQUEUE->IDLE. + */ + if (udc->ep0_req_completed) { + udc->ep0_reply = NULL; + bcm63xx_ep0_read_complete(udc); + /* + * the "ack" sometimes gets eaten (see + * bcm63xx_ep0_do_idle) + */ + ep0state = EP0_REQUEUE; + } else if (shutdown) { + iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_TXCHAN]); + bcm63xx_ep0_nuke_reply(udc, 1); + ep0state = EP0_REQUEUE; + } + break; + } + case EP0_OUT_DATA_PHASE_SETUP: + /* Similar behavior to EP0_IN_DATA_PHASE_SETUP */ + if (udc->ep0_reply) { + bcm63xx_ep0_map_write(udc, IUDMA_EP0_RXCHAN, + udc->ep0_reply); + ep0state = EP0_OUT_DATA_PHASE_COMPLETE; + } else if (shutdown) { + ep0state = EP0_REQUEUE; + } + break; + case EP0_OUT_DATA_PHASE_COMPLETE: { + /* Similar behavior to EP0_IN_DATA_PHASE_COMPLETE */ + if (udc->ep0_req_completed) { + udc->ep0_reply = NULL; + bcm63xx_ep0_read_complete(udc); + + /* send 0-byte ack to host */ + bcm63xx_ep0_internal_request(udc, IUDMA_EP0_TXCHAN, 0); + ep0state = EP0_OUT_STATUS_PHASE; + } else if (shutdown) { + iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_RXCHAN]); + bcm63xx_ep0_nuke_reply(udc, 0); + ep0state = EP0_REQUEUE; + } + break; + } + case EP0_OUT_STATUS_PHASE: + /* + * Normal case: 0-byte OUT ack packet is in flight; wait + * for it to finish, then go back to REQUEUE->IDLE. + * + * Shutdown case: just cancel the transmission. Don't bother + * calling the completion, because it originated from this + * function anyway. Then go back to REQUEUE->IDLE. + */ + if (udc->ep0_req_completed) { + bcm63xx_ep0_read_complete(udc); + ep0state = EP0_REQUEUE; + } else if (shutdown) { + iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_TXCHAN]); + udc->ep0_request = NULL; + ep0state = EP0_REQUEUE; + } + break; + case EP0_IN_FAKE_STATUS_PHASE: { + /* + * Normal case: we spoofed a SETUP packet and are now + * waiting for the gadget driver to send a 0-byte reply. + * This doesn't actually get sent to the HW because the + * HW has already sent its own reply. Once we get the + * response, return to IDLE. + * + * Shutdown case: return to IDLE immediately. + * + * Note that the ep0 RX descriptor has remained queued + * (and possibly unfilled) during this entire transaction. + * The HW datapath (IUDMA) never even sees SET_CONFIGURATION + * or SET_INTERFACE transactions. + */ + struct usb_request *r = udc->ep0_reply; + + if (!r) { + if (shutdown) + ep0state = EP0_IDLE; + break; + } + + bcm63xx_ep0_complete(udc, r, 0); + udc->ep0_reply = NULL; + ep0state = EP0_IDLE; + break; + } + case EP0_SHUTDOWN: + break; + } + + if (udc->ep0state == ep0state) + return -EAGAIN; + + udc->ep0state = ep0state; + return 0; +} + +/** + * bcm63xx_ep0_process - ep0 worker thread / state machine. + * @w: Workqueue struct. + * + * bcm63xx_ep0_process is triggered any time an event occurs on ep0. It + * is used to synchronize ep0 events and ensure that both HW and SW events + * occur in a well-defined order. When the ep0 IUDMA queues are idle, it may + * synthesize SET_CONFIGURATION / SET_INTERFACE requests that were consumed + * by the USBD hardware. + * + * The worker function will continue iterating around the state machine + * until there is nothing left to do. Usually "nothing left to do" means + * that we're waiting for a new event from the hardware. + */ +static void bcm63xx_ep0_process(struct work_struct *w) +{ + struct bcm63xx_udc *udc = container_of(w, struct bcm63xx_udc, ep0_wq); + spin_lock_irq(&udc->lock); + while (bcm63xx_ep0_one_round(udc) == 0) + ; + spin_unlock_irq(&udc->lock); +} + +/*********************************************************************** + * Standard UDC gadget operations + ***********************************************************************/ + +/** + * bcm63xx_udc_get_frame - Read current SOF frame number from the HW. + * @gadget: USB slave device. + */ +static int bcm63xx_udc_get_frame(struct usb_gadget *gadget) +{ + struct bcm63xx_udc *udc = gadget_to_udc(gadget); + + return (usbd_readl(udc, USBD_STATUS_REG) & + USBD_STATUS_SOF_MASK) >> USBD_STATUS_SOF_SHIFT; +} + +/** + * bcm63xx_udc_pullup - Enable/disable pullup on D+ line. + * @gadget: USB slave device. + * @is_on: 0 to disable pullup, 1 to enable. + * + * See notes in bcm63xx_select_pullup(). + */ +static int bcm63xx_udc_pullup(struct usb_gadget *gadget, int is_on) +{ + struct bcm63xx_udc *udc = gadget_to_udc(gadget); + unsigned long flags; + int i, rc = -EINVAL; + + spin_lock_irqsave(&udc->lock, flags); + if (is_on && udc->ep0state == EP0_SHUTDOWN) { + udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->ep0state = EP0_REQUEUE; + bcm63xx_fifo_setup(udc); + bcm63xx_fifo_reset(udc); + bcm63xx_ep_setup(udc); + + bitmap_zero(&udc->wedgemap, BCM63XX_NUM_EP); + for (i = 0; i < BCM63XX_NUM_EP; i++) + bcm63xx_set_stall(udc, &udc->bep[i], false); + + bcm63xx_set_ctrl_irqs(udc, true); + bcm63xx_select_pullup(gadget_to_udc(gadget), true); + rc = 0; + } else if (!is_on && udc->ep0state != EP0_SHUTDOWN) { + bcm63xx_select_pullup(gadget_to_udc(gadget), false); + + udc->ep0_req_shutdown = 1; + spin_unlock_irqrestore(&udc->lock, flags); + + while (1) { + schedule_work(&udc->ep0_wq); + if (udc->ep0state == EP0_SHUTDOWN) + break; + msleep(50); + } + bcm63xx_set_ctrl_irqs(udc, false); + cancel_work_sync(&udc->ep0_wq); + return 0; + } + + spin_unlock_irqrestore(&udc->lock, flags); + return rc; +} + +/** + * bcm63xx_udc_start - Start the controller. + * @gadget: USB slave device. + * @driver: Driver for USB slave devices. + */ +static int bcm63xx_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct bcm63xx_udc *udc = gadget_to_udc(gadget); + unsigned long flags; + + if (!driver || driver->max_speed < USB_SPEED_HIGH || + !driver->setup) + return -EINVAL; + if (!udc) + return -ENODEV; + if (udc->driver) + return -EBUSY; + + spin_lock_irqsave(&udc->lock, flags); + + set_clocks(udc, true); + bcm63xx_fifo_setup(udc); + bcm63xx_ep_init(udc); + bcm63xx_ep_setup(udc); + bcm63xx_fifo_reset(udc); + bcm63xx_select_phy_mode(udc, true); + + udc->driver = driver; + driver->driver.bus = NULL; + udc->gadget.dev.driver = &driver->driver; + udc->gadget.dev.of_node = udc->dev->of_node; + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +/** + * bcm63xx_udc_stop - Shut down the controller. + * @gadget: USB slave device. + * @driver: Driver for USB slave devices. + */ +static int bcm63xx_udc_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct bcm63xx_udc *udc = gadget_to_udc(gadget); + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + + udc->driver = NULL; + udc->gadget.dev.driver = NULL; + + /* + * If we switch the PHY too abruptly after dropping D+, the host + * will often complain: + * + * hub 1-0:1.0: port 1 disabled by hub (EMI?), re-enabling... + */ + msleep(100); + + bcm63xx_select_phy_mode(udc, false); + set_clocks(udc, false); + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static const struct usb_gadget_ops bcm63xx_udc_ops = { + .get_frame = bcm63xx_udc_get_frame, + .pullup = bcm63xx_udc_pullup, + .udc_start = bcm63xx_udc_start, + .udc_stop = bcm63xx_udc_stop, +}; + +/*********************************************************************** + * IRQ handling + ***********************************************************************/ + +/** + * bcm63xx_update_cfg_iface - Read current configuration/interface settings. + * @udc: Reference to the device controller. + * + * This controller intercepts SET_CONFIGURATION and SET_INTERFACE messages. + * The driver never sees the raw control packets coming in on the ep0 + * IUDMA channel, but at least we get an interrupt event to tell us that + * new values are waiting in the USBD_STATUS register. + */ +static void bcm63xx_update_cfg_iface(struct bcm63xx_udc *udc) +{ + u32 reg = usbd_readl(udc, USBD_STATUS_REG); + + udc->cfg = (reg & USBD_STATUS_CFG_MASK) >> USBD_STATUS_CFG_SHIFT; + udc->iface = (reg & USBD_STATUS_INTF_MASK) >> USBD_STATUS_INTF_SHIFT; + udc->alt_iface = (reg & USBD_STATUS_ALTINTF_MASK) >> + USBD_STATUS_ALTINTF_SHIFT; + bcm63xx_ep_setup(udc); +} + +/** + * bcm63xx_update_link_speed - Check to see if the link speed has changed. + * @udc: Reference to the device controller. + * + * The link speed update coincides with a SETUP IRQ. Returns 1 if the + * speed has changed, so that the caller can update the endpoint settings. + */ +static int bcm63xx_update_link_speed(struct bcm63xx_udc *udc) +{ + u32 reg = usbd_readl(udc, USBD_STATUS_REG); + enum usb_device_speed oldspeed = udc->gadget.speed; + + switch ((reg & USBD_STATUS_SPD_MASK) >> USBD_STATUS_SPD_SHIFT) { + case BCM63XX_SPD_HIGH: + udc->gadget.speed = USB_SPEED_HIGH; + break; + case BCM63XX_SPD_FULL: + udc->gadget.speed = USB_SPEED_FULL; + break; + default: + /* this should never happen */ + udc->gadget.speed = USB_SPEED_UNKNOWN; + dev_err(udc->dev, + "received SETUP packet with invalid link speed\n"); + return 0; + } + + if (udc->gadget.speed != oldspeed) { + dev_info(udc->dev, "link up, %s-speed mode\n", + udc->gadget.speed == USB_SPEED_HIGH ? "high" : "full"); + return 1; + } else { + return 0; + } +} + +/** + * bcm63xx_update_wedge - Iterate through wedged endpoints. + * @udc: Reference to the device controller. + * @new_status: true to "refresh" wedge status; false to clear it. + * + * On a SETUP interrupt, we need to manually "refresh" the wedge status + * because the controller hardware is designed to automatically clear + * stalls in response to a CLEAR_FEATURE request from the host. + * + * On a RESET interrupt, we do want to restore all wedged endpoints. + */ +static void bcm63xx_update_wedge(struct bcm63xx_udc *udc, bool new_status) +{ + int i; + + for_each_set_bit(i, &udc->wedgemap, BCM63XX_NUM_EP) { + bcm63xx_set_stall(udc, &udc->bep[i], new_status); + if (!new_status) + clear_bit(i, &udc->wedgemap); + } +} + +/** + * bcm63xx_udc_ctrl_isr - ISR for control path events (USBD). + * @irq: IRQ number (unused). + * @dev_id: Reference to the device controller. + * + * This is where we handle link (VBUS) down, USB reset, speed changes, + * SET_CONFIGURATION, and SET_INTERFACE events. + */ +static irqreturn_t bcm63xx_udc_ctrl_isr(int irq, void *dev_id) +{ + struct bcm63xx_udc *udc = dev_id; + u32 stat; + bool disconnected = false; + + stat = usbd_readl(udc, USBD_EVENT_IRQ_STATUS_REG) & + usbd_readl(udc, USBD_EVENT_IRQ_MASK_REG); + + usbd_writel(udc, stat, USBD_EVENT_IRQ_STATUS_REG); + + spin_lock(&udc->lock); + if (stat & BIT(USBD_EVENT_IRQ_USB_LINK)) { + /* VBUS toggled */ + + if (!(usbd_readl(udc, USBD_EVENTS_REG) & + USBD_EVENTS_USB_LINK_MASK) && + udc->gadget.speed != USB_SPEED_UNKNOWN) + dev_info(udc->dev, "link down\n"); + + udc->gadget.speed = USB_SPEED_UNKNOWN; + disconnected = true; + } + if (stat & BIT(USBD_EVENT_IRQ_USB_RESET)) { + bcm63xx_fifo_setup(udc); + bcm63xx_fifo_reset(udc); + bcm63xx_ep_setup(udc); + + bcm63xx_update_wedge(udc, false); + + udc->ep0_req_reset = 1; + schedule_work(&udc->ep0_wq); + disconnected = true; + } + if (stat & BIT(USBD_EVENT_IRQ_SETUP)) { + if (bcm63xx_update_link_speed(udc)) { + bcm63xx_fifo_setup(udc); + bcm63xx_ep_setup(udc); + } + bcm63xx_update_wedge(udc, true); + } + if (stat & BIT(USBD_EVENT_IRQ_SETCFG)) { + bcm63xx_update_cfg_iface(udc); + udc->ep0_req_set_cfg = 1; + schedule_work(&udc->ep0_wq); + } + if (stat & BIT(USBD_EVENT_IRQ_SETINTF)) { + bcm63xx_update_cfg_iface(udc); + udc->ep0_req_set_iface = 1; + schedule_work(&udc->ep0_wq); + } + spin_unlock(&udc->lock); + + if (disconnected && udc->driver) + udc->driver->disconnect(&udc->gadget); + + return IRQ_HANDLED; +} + +/** + * bcm63xx_udc_data_isr - ISR for data path events (IUDMA). + * @irq: IRQ number (unused). + * @dev_id: Reference to the IUDMA channel that generated the interrupt. + * + * For the two ep0 channels, we have special handling that triggers the + * ep0 worker thread. For normal bulk/intr channels, either queue up + * the next buffer descriptor for the transaction (incomplete transaction), + * or invoke the completion callback (complete transactions). + */ +static irqreturn_t bcm63xx_udc_data_isr(int irq, void *dev_id) +{ + struct iudma_ch *iudma = dev_id; + struct bcm63xx_udc *udc = iudma->udc; + struct bcm63xx_ep *bep; + struct usb_request *req = NULL; + struct bcm63xx_req *breq = NULL; + int rc; + bool is_done = false; + + spin_lock(&udc->lock); + + usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK, + ENETDMAC_IR_REG(iudma->ch_idx)); + bep = iudma->bep; + rc = iudma_read(udc, iudma); + + /* special handling for EP0 RX (0) and TX (1) */ + if (iudma->ch_idx == IUDMA_EP0_RXCHAN || + iudma->ch_idx == IUDMA_EP0_TXCHAN) { + req = udc->ep0_request; + breq = our_req(req); + + /* a single request could require multiple submissions */ + if (rc >= 0) { + req->actual += rc; + + if (req->actual >= req->length || breq->bd_bytes > rc) { + udc->ep0_req_completed = 1; + is_done = true; + schedule_work(&udc->ep0_wq); + + /* "actual" on a ZLP is 1 byte */ + req->actual = min(req->actual, req->length); + } else { + /* queue up the next BD (same request) */ + iudma_write(udc, iudma, breq); + } + } + } else if (!list_empty(&bep->queue)) { + breq = list_first_entry(&bep->queue, struct bcm63xx_req, queue); + req = &breq->req; + + if (rc >= 0) { + req->actual += rc; + + if (req->actual >= req->length || breq->bd_bytes > rc) { + is_done = true; + list_del(&breq->queue); + + req->actual = min(req->actual, req->length); + + if (!list_empty(&bep->queue)) { + struct bcm63xx_req *next; + + next = list_first_entry(&bep->queue, + struct bcm63xx_req, queue); + iudma_write(udc, iudma, next); + } + } else { + iudma_write(udc, iudma, breq); + } + } + } + spin_unlock(&udc->lock); + + if (is_done) { + usb_gadget_unmap_request(&udc->gadget, req, iudma->is_tx); + if (req->complete) + req->complete(&bep->ep, req); + } + + return IRQ_HANDLED; +} + +/*********************************************************************** + * Debug filesystem + ***********************************************************************/ + +/* + * bcm63xx_usbd_dbg_show - Show USBD controller state. + * @s: seq_file to which the information will be written. + * @p: Unused. + * + * This file nominally shows up as /sys/kernel/debug/bcm63xx_udc/usbd + */ +static int bcm63xx_usbd_dbg_show(struct seq_file *s, void *p) +{ + struct bcm63xx_udc *udc = s->private; + + if (!udc->driver) + return -ENODEV; + + seq_printf(s, "ep0 state: %s\n", + bcm63xx_ep0_state_names[udc->ep0state]); + seq_printf(s, " pending requests: %s%s%s%s%s%s%s\n", + udc->ep0_req_reset ? "reset " : "", + udc->ep0_req_set_cfg ? "set_cfg " : "", + udc->ep0_req_set_iface ? "set_iface " : "", + udc->ep0_req_shutdown ? "shutdown " : "", + udc->ep0_request ? "pending " : "", + udc->ep0_req_completed ? "completed " : "", + udc->ep0_reply ? "reply " : ""); + seq_printf(s, "cfg: %d; iface: %d; alt_iface: %d\n", + udc->cfg, udc->iface, udc->alt_iface); + seq_printf(s, "regs:\n"); + seq_printf(s, " control: %08x; straps: %08x; status: %08x\n", + usbd_readl(udc, USBD_CONTROL_REG), + usbd_readl(udc, USBD_STRAPS_REG), + usbd_readl(udc, USBD_STATUS_REG)); + seq_printf(s, " events: %08x; stall: %08x\n", + usbd_readl(udc, USBD_EVENTS_REG), + usbd_readl(udc, USBD_STALL_REG)); + + return 0; +} + +/* + * bcm63xx_iudma_dbg_show - Show IUDMA status and descriptors. + * @s: seq_file to which the information will be written. + * @p: Unused. + * + * This file nominally shows up as /sys/kernel/debug/bcm63xx_udc/iudma + */ +static int bcm63xx_iudma_dbg_show(struct seq_file *s, void *p) +{ + struct bcm63xx_udc *udc = s->private; + int ch_idx, i; + u32 sram2, sram3; + + if (!udc->driver) + return -ENODEV; + + for (ch_idx = 0; ch_idx < BCM63XX_NUM_IUDMA; ch_idx++) { + struct iudma_ch *iudma = &udc->iudma[ch_idx]; + struct list_head *pos; + + seq_printf(s, "IUDMA channel %d -- ", ch_idx); + switch (iudma_defaults[ch_idx].ep_type) { + case BCMEP_CTRL: + seq_printf(s, "control"); + break; + case BCMEP_BULK: + seq_printf(s, "bulk"); + break; + case BCMEP_INTR: + seq_printf(s, "interrupt"); + break; + } + seq_printf(s, ch_idx & 0x01 ? " tx" : " rx"); + seq_printf(s, " [ep%d]:\n", + max_t(int, iudma_defaults[ch_idx].ep_num, 0)); + seq_printf(s, " cfg: %08x; irqstat: %08x; irqmask: %08x; maxburst: %08x\n", + usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)), + usb_dmac_readl(udc, ENETDMAC_IR_REG(ch_idx)), + usb_dmac_readl(udc, ENETDMAC_IRMASK_REG(ch_idx)), + usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG(ch_idx))); + + sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG(ch_idx)); + sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG(ch_idx)); + seq_printf(s, " base: %08x; index: %04x_%04x; desc: %04x_%04x %08x\n", + usb_dmas_readl(udc, ENETDMAS_RSTART_REG(ch_idx)), + sram2 >> 16, sram2 & 0xffff, + sram3 >> 16, sram3 & 0xffff, + usb_dmas_readl(udc, ENETDMAS_SRAM4_REG(ch_idx))); + seq_printf(s, " desc: %d/%d used", iudma->n_bds_used, + iudma->n_bds); + + if (iudma->bep) { + i = 0; + list_for_each(pos, &iudma->bep->queue) + i++; + seq_printf(s, "; %d queued\n", i); + } else { + seq_printf(s, "\n"); + } + + for (i = 0; i < iudma->n_bds; i++) { + struct bcm_enet_desc *d = &iudma->bd_ring[i]; + + seq_printf(s, " %03x (%02x): len_stat: %04x_%04x; pa %08x", + i * sizeof(*d), i, + d->len_stat >> 16, d->len_stat & 0xffff, + d->address); + if (d == iudma->read_bd) + seq_printf(s, " <write_bd) + seq_printf(s, " <i_private); +} + +static int bcm63xx_iudma_dbg_open(struct inode *inode, struct file *file) +{ + return single_open(file, bcm63xx_iudma_dbg_show, inode->i_private); +} + +static const struct file_operations usbd_dbg_fops = { + .owner = THIS_MODULE, + .open = bcm63xx_usbd_dbg_open, + .llseek = seq_lseek, + .read = seq_read, + .release = single_release, +}; + +static const struct file_operations iudma_dbg_fops = { + .owner = THIS_MODULE, + .open = bcm63xx_iudma_dbg_open, + .llseek = seq_lseek, + .read = seq_read, + .release = single_release, +}; + + +/** + * bcm63xx_udc_init_debugfs - Create debugfs entries. + * @udc: Reference to the device controller. + */ +static void bcm63xx_udc_init_debugfs(struct bcm63xx_udc *udc) +{ + struct dentry *root, *usbd, *iudma; + + if (!IS_ENABLED(CONFIG_USB_GADGET_DEBUG_FS)) + return; + + root = debugfs_create_dir(udc->gadget.name, NULL); + if (IS_ERR(root) || !root) + goto err_root; + + usbd = debugfs_create_file("usbd", 0400, root, udc, + &usbd_dbg_fops); + if (!usbd) + goto err_usbd; + iudma = debugfs_create_file("iudma", 0400, root, udc, + &iudma_dbg_fops); + if (!iudma) + goto err_iudma; + + udc->debugfs_root = root; + udc->debugfs_usbd = usbd; + udc->debugfs_iudma = iudma; + return; +err_iudma: + debugfs_remove(usbd); +err_usbd: + debugfs_remove(root); +err_root: + dev_err(udc->dev, "debugfs is not available\n"); +} + +/** + * bcm63xx_udc_cleanup_debugfs - Remove debugfs entries. + * @udc: Reference to the device controller. + * + * debugfs_remove() is safe to call with a NULL argument. + */ +static void bcm63xx_udc_cleanup_debugfs(struct bcm63xx_udc *udc) +{ + debugfs_remove(udc->debugfs_iudma); + debugfs_remove(udc->debugfs_usbd); + debugfs_remove(udc->debugfs_root); + udc->debugfs_iudma = NULL; + udc->debugfs_usbd = NULL; + udc->debugfs_root = NULL; +} + +/*********************************************************************** + * Driver init/exit + ***********************************************************************/ + +/** + * bcm63xx_udc_gadget_release - Called from device_release(). + * @dev: Unused. + * + * We get a warning if this function doesn't exist, but it's empty because + * we don't have to free any of the memory allocated with the devm_* APIs. + */ +static void bcm63xx_udc_gadget_release(struct device *dev) +{ +} + +/** + * bcm63xx_udc_probe - Initialize a new instance of the UDC. + * @pdev: Platform device struct from the bcm63xx BSP code. + * + * Note that platform data is required, because pd.port_no varies from chip + * to chip and is used to switch the correct USB port to device mode. + */ +static int __devinit bcm63xx_udc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct bcm63xx_usbd_platform_data *pd = dev->platform_data; + struct bcm63xx_udc *udc; + struct resource *res; + int rc = -ENOMEM, i, irq; + + udc = devm_kzalloc(dev, sizeof(*udc), GFP_KERNEL); + if (!udc) { + dev_err(dev, "cannot allocate memory\n"); + return -ENOMEM; + } + + platform_set_drvdata(pdev, udc); + udc->dev = dev; + udc->pd = pd; + + if (!pd) { + dev_err(dev, "missing platform data\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "error finding USBD resource\n"); + return -ENXIO; + } + udc->usbd_regs = devm_request_and_ioremap(dev, res); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) { + dev_err(dev, "error finding IUDMA resource\n"); + return -ENXIO; + } + udc->iudma_regs = devm_request_and_ioremap(dev, res); + + if (!udc->usbd_regs || !udc->iudma_regs) { + dev_err(dev, "error requesting resources\n"); + return -ENXIO; + } + + spin_lock_init(&udc->lock); + INIT_WORK(&udc->ep0_wq, bcm63xx_ep0_process); + dev_set_name(&udc->gadget.dev, "gadget"); + + udc->gadget.ops = &bcm63xx_udc_ops; + udc->gadget.name = dev_name(dev); + udc->gadget.dev.parent = dev; + udc->gadget.dev.release = bcm63xx_udc_gadget_release; + udc->gadget.dev.dma_mask = dev->dma_mask; + + if (!pd->use_fullspeed && !use_fullspeed) + udc->gadget.max_speed = USB_SPEED_HIGH; + else + udc->gadget.max_speed = USB_SPEED_FULL; + + /* request clocks, allocate buffers, and clear any pending IRQs */ + rc = bcm63xx_init_udc_hw(udc); + if (rc) + return rc; + + rc = -ENXIO; + + /* IRQ resource #0: control interrupt (VBUS, speed, etc.) */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(dev, "missing IRQ resource #0\n"); + goto out_uninit; + } + if (devm_request_irq(dev, irq, &bcm63xx_udc_ctrl_isr, 0, + dev_name(dev), udc) < 0) { + dev_err(dev, "error requesting IRQ #%d\n", irq); + goto out_uninit; + } + + /* IRQ resources #1-6: data interrupts for IUDMA channels 0-5 */ + for (i = 0; i < BCM63XX_NUM_IUDMA; i++) { + irq = platform_get_irq(pdev, i + 1); + if (irq < 0) { + dev_err(dev, "missing IRQ resource #%d\n", i + 1); + goto out_uninit; + } + if (devm_request_irq(dev, irq, &bcm63xx_udc_data_isr, 0, + dev_name(dev), &udc->iudma[i]) < 0) { + dev_err(dev, "error requesting IRQ #%d\n", irq); + goto out_uninit; + } + } + + rc = device_register(&udc->gadget.dev); + if (rc) + goto out_uninit; + + bcm63xx_udc_init_debugfs(udc); + rc = usb_add_gadget_udc(dev, &udc->gadget); + if (!rc) + return 0; + + bcm63xx_udc_cleanup_debugfs(udc); + device_unregister(&udc->gadget.dev); +out_uninit: + bcm63xx_uninit_udc_hw(udc); + return rc; +} + +/** + * bcm63xx_udc_remove - Remove the device from the system. + * @pdev: Platform device struct from the bcm63xx BSP code. + */ +static int __devexit bcm63xx_udc_remove(struct platform_device *pdev) +{ + struct bcm63xx_udc *udc = platform_get_drvdata(pdev); + + bcm63xx_udc_cleanup_debugfs(udc); + usb_del_gadget_udc(&udc->gadget); + device_unregister(&udc->gadget.dev); + BUG_ON(udc->driver); + + platform_set_drvdata(pdev, NULL); + bcm63xx_uninit_udc_hw(udc); + + return 0; +} + +static struct platform_driver bcm63xx_udc_driver = { + .probe = bcm63xx_udc_probe, + .remove = __devexit_p(bcm63xx_udc_remove), + .driver = { + .name = DRV_MODULE_NAME, + .owner = THIS_MODULE, + }, +}; +module_platform_driver(bcm63xx_udc_driver); + +MODULE_DESCRIPTION("BCM63xx USB Peripheral Controller"); +MODULE_AUTHOR("Kevin Cernekee "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_MODULE_NAME); diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h index b8b3a341121..0ccca58e7a8 100644 --- a/drivers/usb/gadget/gadget_chips.h +++ b/drivers/usb/gadget/gadget_chips.h @@ -28,6 +28,7 @@ #define gadget_is_amd5536udc(g) (!strcmp("amd5536udc", (g)->name)) #define gadget_is_at91(g) (!strcmp("at91_udc", (g)->name)) #define gadget_is_atmel_usba(g) (!strcmp("atmel_usba_udc", (g)->name)) +#define gadget_is_bcm63xx(g) (!strcmp("bcm63xx_udc", (g)->name)) #define gadget_is_ci13xxx_msm(g) (!strcmp("ci13xxx_msm", (g)->name)) #define gadget_is_ci13xxx_pci(g) (!strcmp("ci13xxx_pci", (g)->name)) #define gadget_is_dummy(g) (!strcmp("dummy_udc", (g)->name)) @@ -121,6 +122,8 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget) return 0x32; else if (gadget_is_lpc32xx(gadget)) return 0x33; + else if (gadget_is_bcm63xx(gadget)) + return 0x34; return -ENOENT; } -- cgit v1.2.3