From d6662c351a827264706bf880a36cdd376808ba1c Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:40 +0000
Subject: [ARM] SMDK6410: Ensure LCD settings are setup

Ensure that the LCD output type is RGB and that
the modem interface is not bypassing the LCD
block. This ensures the LCD interface output
gets to the pins in the correct format.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6410/mach-smdk6410.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 7f473e47e4f..d0b9f09b726 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -39,6 +39,9 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
+#include <plat/regs-modem.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-sys.h>
 #include <plat/iic.h>
 #include <plat/fb.h>
 
@@ -155,9 +158,23 @@ static struct i2c_board_info i2c_devs1[] __initdata = {
 
 static void __init smdk6410_map_io(void)
 {
+	u32 tmp;
+
 	s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
+
+	/* set the LCD type */
+
+	tmp = __raw_readl(S3C64XX_SPCON);
+	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+	__raw_writel(tmp, S3C64XX_SPCON);
+
+	/* remove the lcd bypass */
+	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+	tmp &= ~MIFPCON_LCD_BYPASS;
+	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
 }
 
 static void __init smdk6410_machine_init(void)
-- 
cgit v1.2.3


From 3056ea0afba83d19af5f1f3daf6ed7211f0717da Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Tue, 27 Jan 2009 16:18:01 +0000
Subject: [ARM] SMDK6410: Add support for SMSC9115 ethernet controller

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6410/mach-smdk6410.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index d0b9f09b726..dfd84d00f8d 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -24,6 +24,7 @@
 #include <linux/fb.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
+#include <linux/smsc911x.h>
 
 #include <video/platform_lcd.h>
 
@@ -44,6 +45,7 @@
 #include <plat/regs-sys.h>
 #include <plat/iic.h>
 #include <plat/fb.h>
+#include <plat/gpio-cfg.h>
 
 #include <plat/s3c6410.h>
 #include <plat/clock.h>
@@ -132,6 +134,37 @@ static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
 	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
 };
 
+static struct resource smdk6410_smsc911x_resources[] = {
+	[0] = {
+		.start = 0x18000000,
+		.end   = 0x18000000 + SZ_64K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = S3C_EINT(10),
+		.end   = S3C_EINT(10),
+		.flags = IORESOURCE_IRQ | IRQ_TYPE_LEVEL_LOW,
+	},
+};
+
+static struct smsc911x_platform_config smdk6410_smsc911x_pdata = {
+	.irq_polarity  = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type      = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags         = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+
+static struct platform_device smdk6410_smsc911x = {
+	.name          = "smsc911x",
+	.id            = -1,
+	.num_resources = ARRAY_SIZE(smdk6410_smsc911x_resources),
+	.resource      = &smdk6410_smsc911x_resources[0],
+	.dev = {
+		.platform_data = &smdk6410_smsc911x_pdata,
+	},
+};
+
 static struct map_desc smdk6410_iodesc[] = {};
 
 static struct platform_device *smdk6410_devices[] __initdata = {
@@ -145,6 +178,8 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 	&s3c_device_i2c1,
 	&s3c_device_fb,
 	&smdk6410_lcd_powerdev,
+
+	&smdk6410_smsc911x,
 };
 
 static struct i2c_board_info i2c_devs0[] __initdata = {
-- 
cgit v1.2.3


From ecc558acaba9ca1c6e2e7b54a1edb73ee391ae17 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Tue, 17 Feb 2009 15:59:38 +0000
Subject: [ARM] SMDK6410: Support WM1190-EV1 PMIC board

The SMDK6410 supports pluggable PMIC boards. One such board is the
Wolfson Microelectronics 1190-EV1 for the WM8350 PMICs. This patch
introduces initial support for this module. Further patches will
add additional integration with the system as support for the
S3C6410 and other devices on the system improves.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6410/Kconfig         |  17 +++++
 arch/arm/mach-s3c6410/mach-smdk6410.c | 131 ++++++++++++++++++++++++++++++++++
 2 files changed, 148 insertions(+)

diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index 1d501007002..ffa4974efdd 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -60,3 +60,20 @@ config SMDK6410_SD_CH1
 	  channels 0 and 1 are the same.
 
 endchoice
+
+config SMDK6410_WM1190_EV1
+	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
+	depends on MACH_SMDK6410
+	select REGULATOR
+	select REGULATOR_WM8350
+	select MFD_WM8350_I2C
+	select MFD_WM8350_CONFIG_MODE_0
+	select MFD_WM8350_CONFIG_MODE_3
+	select MFD_WM8352_CONFIG_MODE_0
+	help
+	  The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
+	  and audio daughtercard for the Samsung SMDK6410 reference
+	  platform.  Enabling this option will build support for this
+	  module into the kernel.  The presence of the module will be
+	  detected at runtime so the the resulting kernel can be used
+	  with or without the 1190-EV1 fitted.
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index dfd84d00f8d..466dee0954f 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -26,6 +26,11 @@
 #include <linux/delay.h>
 #include <linux/smsc911x.h>
 
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/pmic.h>
+#endif
+
 #include <video/platform_lcd.h>
 
 #include <asm/mach/arch.h>
@@ -182,9 +187,135 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 	&smdk6410_smsc911x,
 };
 
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+/* S3C64xx internal logic & PLL */
+static struct regulator_init_data wm8350_dcdc1_data = {
+	.constraints = {
+		.name = "PVDD_INT/PVDD_PLL",
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.always_on = 1,
+		.apply_uV = 1,
+	},
+};
+
+/* Memory */
+static struct regulator_init_data wm8350_dcdc3_data = {
+	.constraints = {
+		.name = "PVDD_MEM",
+		.min_uV = 1800000,
+		.max_uV = 1800000,
+		.always_on = 1,
+		.state_mem = {
+			 .uV = 1800000,
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 1,
+		 },
+		.initial_state = PM_SUSPEND_MEM,
+	},
+};
+
+/* USB, EXT, PCM, ADC/DAC, USB, MMC */
+static struct regulator_init_data wm8350_dcdc4_data = {
+	.constraints = {
+		.name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
+		.min_uV = 3000000,
+		.max_uV = 3000000,
+		.always_on = 1,
+	},
+};
+
+/* ARM core */
+static struct regulator_init_data wm8350_dcdc6_data = {
+	.constraints = {
+		.name = "PVDD_ARM",
+		.min_uV = 1000000,
+		.max_uV = 1300000,
+		.always_on = 1,
+	},
+};
+
+/* Alive */
+static struct regulator_init_data wm8350_ldo1_data = {
+	.constraints = {
+		.name = "PVDD_ALIVE",
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.always_on = 1,
+		.apply_uV = 1,
+	},
+};
+
+/* OTG */
+static struct regulator_init_data wm8350_ldo2_data = {
+	.constraints = {
+		.name = "PVDD_OTG",
+		.min_uV = 3300000,
+		.max_uV = 3300000,
+	},
+};
+
+/* LCD */
+static struct regulator_init_data wm8350_ldo3_data = {
+	.constraints = {
+		.name = "PVDD_LCD",
+		.min_uV = 3000000,
+		.max_uV = 3000000,
+	},
+};
+
+/* OTGi/1190-EV1 HPVDD & AVDD */
+static struct regulator_init_data wm8350_ldo4_data = {
+	.constraints = {
+		.name = "PVDD_OTGI/HPVDD/AVDD",
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.apply_uV = 1,
+	},
+};
+
+static struct {
+	int regulator;
+	struct regulator_init_data *initdata;
+} wm1190_regulators[] = {
+	{ WM8350_DCDC_1, &wm8350_dcdc1_data },
+	{ WM8350_DCDC_3, &wm8350_dcdc3_data },
+	{ WM8350_DCDC_4, &wm8350_dcdc4_data },
+	{ WM8350_DCDC_6, &wm8350_dcdc6_data },
+	{ WM8350_LDO_1, &wm8350_ldo1_data },
+	{ WM8350_LDO_2, &wm8350_ldo2_data },
+	{ WM8350_LDO_3, &wm8350_ldo3_data },
+	{ WM8350_LDO_4, &wm8350_ldo4_data },
+};
+
+static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
+{
+	int i;
+
+	/* Instantiate the regulators */
+	for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
+		wm8350_register_regulator(wm8350,
+					  wm1190_regulators[i].regulator,
+					  wm1190_regulators[i].initdata);
+
+	return 0;
+}
+
+static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
+	.init = smdk6410_wm8350_init,
+};
+#endif
+
 static struct i2c_board_info i2c_devs0[] __initdata = {
 	{ I2C_BOARD_INFO("24c08", 0x50), },
 	{ I2C_BOARD_INFO("wm8580", 0x1b), },
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+	{ I2C_BOARD_INFO("wm8350", 0x1a),
+	  .platform_data = &smdk6410_wm8350_pdata,
+	  .irq = S3C_EINT(12),
+	},
+#endif
 };
 
 static struct i2c_board_info i2c_devs1[] __initdata = {
-- 
cgit v1.2.3


From 87c4122f1714f96faa1b1c9449f762b9c56f77e4 Mon Sep 17 00:00:00 2001
From: Kyungmin Park <kyungmin.park@samsung.com>
Date: Wed, 11 Mar 2009 11:05:55 +0900
Subject: [ARM] S3C6410: Basic support for NCP board (v2)

This is a basic support for NCP board based on s3c6410.

Only enables the serial. also remove empty i2c device.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6410/Kconfig    |   9 ++++
 arch/arm/mach-s3c6410/Makefile   |   1 +
 arch/arm/mach-s3c6410/mach-ncp.c | 107 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 117 insertions(+)
 create mode 100644 arch/arm/mach-s3c6410/mach-ncp.c

diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index ffa4974efdd..53350b4493b 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -77,3 +77,12 @@ config SMDK6410_WM1190_EV1
 	  module into the kernel.  The presence of the module will be
 	  detected at runtime so the the resulting kernel can be used
 	  with or without the 1190-EV1 fitted.
+
+config MACH_NCP
+	bool "NCP"
+	select CPU_S3C6410
+	select S3C_DEV_I2C1
+	select S3C_DEV_HSMMC1
+	select S3C64XX_SETUP_I2C1
+	help
+          Machine support for the Samsung NCP
diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile
index 2cd4f189036..03e9ea6c64e 100644
--- a/arch/arm/mach-s3c6410/Makefile
+++ b/arch/arm/mach-s3c6410/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_S3C6410_SETUP_SDHCI)	+= setup-sdhci.o
 # machine support
 
 obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
+obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
diff --git a/arch/arm/mach-s3c6410/mach-ncp.c b/arch/arm/mach-s3c6410/mach-ncp.c
new file mode 100644
index 00000000000..6030636f854
--- /dev/null
+++ b/arch/arm/mach-s3c6410/mach-ncp.c
@@ -0,0 +1,107 @@
+/*
+ * linux/arch/arm/mach-s3c6410/mach-ncp.c
+ *
+ * Copyright (C) 2008-2009 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg ncp_uartcfgs[] __initdata = {
+	/* REVISIT: NCP uses only serial 1, 2 */
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+};
+
+static struct platform_device *ncp_devices[] __initdata = {
+	&s3c_device_hsmmc1,
+	&s3c_device_i2c0,
+};
+
+struct map_desc ncp_iodesc[] = {};
+
+static void __init ncp_map_io(void)
+{
+	s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
+}
+
+static void __init ncp_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+
+	platform_add_devices(ncp_devices, ARRAY_SIZE(ncp_devices));
+}
+
+MACHINE_START(NCP, "NCP")
+	/* Maintainer: Samsung Electronics */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= ncp_map_io,
+	.init_machine	= ncp_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
-- 
cgit v1.2.3


From db9256f33c1b9ce72d2a126d51c7fe0de65f0f8c Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Thu, 9 Apr 2009 19:00:19 +0100
Subject: [ARM] SMDK6410: Use active high IRQ for the WM8350 on the WM1190-EV1

Using an active high IRQ ensures that the WM8350 interrupt handling
does not spin when used with a SMDK6410 which has not had R20 removed
and R21 fitted to connect EINT12 to the PMIC module rather thant the
fixed regulators on the CPU module.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6410/mach-smdk6410.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 466dee0954f..15f9c7a2a6c 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -303,6 +303,7 @@ static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
 
 static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
 	.init = smdk6410_wm8350_init,
+	.irq_high = 1,
 };
 #endif
 
-- 
cgit v1.2.3


From f53aee29bef09070e4ab14488e43433b371844ce Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Thu, 9 Apr 2009 16:30:40 +0100
Subject: [ARM] SMDK6410: Mark all supplies as always_on

Since no consumers are currently configured for the SMDK6410 mark all
the supplies on the board as being always_on, ensuring interoperability
with future regulator API changes to disable unused regulators.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6410/mach-smdk6410.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 15f9c7a2a6c..697c0461f2b 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -252,6 +252,7 @@ static struct regulator_init_data wm8350_ldo2_data = {
 		.name = "PVDD_OTG",
 		.min_uV = 3300000,
 		.max_uV = 3300000,
+		.always_on = 1,
 	},
 };
 
@@ -261,6 +262,7 @@ static struct regulator_init_data wm8350_ldo3_data = {
 		.name = "PVDD_LCD",
 		.min_uV = 3000000,
 		.max_uV = 3000000,
+		.always_on = 1,
 	},
 };
 
@@ -271,6 +273,7 @@ static struct regulator_init_data wm8350_ldo4_data = {
 		.min_uV = 1200000,
 		.max_uV = 1200000,
 		.apply_uV = 1,
+		.always_on = 1,
 	},
 };
 
-- 
cgit v1.2.3


From 1f26a8a0fd6d067237f87a95d96ddfe263b96a94 Mon Sep 17 00:00:00 2001
From: Kwangwoo Lee <kwangwoo.lee@gmail.com>
Date: Tue, 28 Apr 2009 10:35:57 +0900
Subject: [PATCH] S3C64XX: Basic A&W6410 board support patch V2

A&W6410 board uses Samsung S3C6410 SoC and it is registered with 2183.
Framebuffer and ethernet devices are supported currently.

Unnecessary header file is removed.
Fix to use __raw_writel() and __raw_readl() for accessing mapped address.

Thank you for your comments.

Signed-off-by: Kwangwoo Lee <kwangwoo.lee@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6410/Kconfig        |   8 ++
 arch/arm/mach-s3c6410/Makefile       |   3 +
 arch/arm/mach-s3c6410/mach-anw6410.c | 245 +++++++++++++++++++++++++++++++++++
 3 files changed, 256 insertions(+)
 create mode 100644 arch/arm/mach-s3c6410/mach-anw6410.c

diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index 53350b4493b..e5a575fdf81 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -19,6 +19,14 @@ config S3C6410_SETUP_SDHCI
 	help
 	  Internal helper functions for S3C6410 based SDHCI systems
 
+config MACH_ANW6410
+	bool "A&W6410"
+	select CPU_S3C6410
+	select S3C_DEV_FB
+	select S3C64XX_SETUP_FB_24BPP
+	help
+	  Machine support for the A&W6410
+
 config MACH_SMDK6410
 	bool "SMDK6410"
 	select CPU_S3C6410
diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile
index 03e9ea6c64e..6f9deac8861 100644
--- a/arch/arm/mach-s3c6410/Makefile
+++ b/arch/arm/mach-s3c6410/Makefile
@@ -20,5 +20,8 @@ obj-$(CONFIG_S3C6410_SETUP_SDHCI)	+= setup-sdhci.o
 
 # machine support
 
+obj-$(CONFIG_MACH_ANW6410)	+= mach-anw6410.o
 obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
 obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
+
+
diff --git a/arch/arm/mach-s3c6410/mach-anw6410.c b/arch/arm/mach-s3c6410/mach-anw6410.c
new file mode 100644
index 00000000000..661cca63de2
--- /dev/null
+++ b/arch/arm/mach-s3c6410/mach-anw6410.c
@@ -0,0 +1,245 @@
+/* linux/arch/arm/mach-s3c6410/mach-anw6410.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ * Copyright 2009 Kwangwoo Lee
+ * 	Kwangwoo Lee <kwangwoo.lee@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/dm9000.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-modem.h>
+
+/* DM9000 */
+#define ANW6410_PA_DM9000	(0x18000000)
+
+/* A hardware buffer to control external devices is mapped at 0x30000000.
+ * It can not be read. So current status must be kept in anw6410_extdev_status.
+ */
+#define ANW6410_VA_EXTDEV	S3C_ADDR(0x02000000)
+#define ANW6410_PA_EXTDEV	(0x30000000)
+
+#define ANW6410_EN_DM9000	(1<<11)
+#define ANW6410_EN_LCD		(1<<14)
+
+static __u32 anw6410_extdev_status;
+
+static struct s3c2410_uartcfg anw6410_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+};
+
+/* framebuffer and LCD setup. */
+static void __init anw6410_lcd_mode_set(void)
+{
+	u32 tmp;
+
+	/* set the LCD type */
+	tmp = __raw_readl(S3C64XX_SPCON);
+	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+	__raw_writel(tmp, S3C64XX_SPCON);
+
+	/* remove the LCD bypass */
+	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+	tmp &= ~MIFPCON_LCD_BYPASS;
+	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+/* GPF1 = LCD panel power
+ * GPF4 = LCD backlight control
+ */
+static void anw6410_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power) {
+		anw6410_extdev_status |= (ANW6410_EN_LCD << 16);
+		__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+
+		gpio_direction_output(S3C64XX_GPF(1), 1);
+		gpio_direction_output(S3C64XX_GPF(4), 1);
+	} else {
+		anw6410_extdev_status &= ~(ANW6410_EN_LCD << 16);
+		__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+
+		gpio_direction_output(S3C64XX_GPF(1), 0);
+		gpio_direction_output(S3C64XX_GPF(4), 0);
+	}
+}
+
+static struct plat_lcd_data anw6410_lcd_power_data = {
+	.set_power	= anw6410_lcd_power_set,
+};
+
+static struct platform_device anw6410_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &anw6410_lcd_power_data,
+};
+
+static struct s3c_fb_pd_win anw6410_fb_win0 = {
+	/* this is to ensure we use win0 */
+	.win_mode	= {
+		.pixclock	= 41094,
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata anw6410_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &anw6410_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+static void __init anw6410_dm9000_enable(void)
+{
+	anw6410_extdev_status |= (ANW6410_EN_DM9000 << 16);
+	__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+}
+
+static struct resource anw6410_dm9000_resource[] = {
+	[0] = {
+		.start = ANW6410_PA_DM9000,
+		.end   = ANW6410_PA_DM9000 + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = ANW6410_PA_DM9000 + 4,
+		.end   = ANW6410_PA_DM9000 + 4 + 500,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start = IRQ_EINT(15),
+		.end   = IRQ_EINT(15),
+		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+	},
+};
+
+static struct dm9000_plat_data anw6410_dm9000_pdata = {
+	.flags	  = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+	/* dev_addr can be set to provide hwaddr. */
+};
+
+static struct platform_device anw6410_device_eth = {
+	.name	= "dm9000",
+	.id	= -1,
+	.num_resources	= ARRAY_SIZE(anw6410_dm9000_resource),
+	.resource	= anw6410_dm9000_resource,
+	.dev	= {
+		.platform_data  = &anw6410_dm9000_pdata,
+	},
+};
+
+static struct map_desc anw6410_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)ANW6410_VA_EXTDEV,
+		.pfn		= __phys_to_pfn(ANW6410_PA_EXTDEV),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct platform_device *anw6410_devices[] __initdata = {
+	&s3c_device_fb,
+	&anw6410_lcd_powerdev,
+	&anw6410_device_eth,
+};
+
+static void __init anw6410_map_io(void)
+{
+	s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
+
+	anw6410_lcd_mode_set();
+}
+
+static void __init anw6410_machine_init(void)
+{
+	s3c_fb_set_platdata(&anw6410_lcd_pdata);
+
+	gpio_request(S3C64XX_GPF(1), "panel power");
+	gpio_request(S3C64XX_GPF(4), "LCD backlight");
+
+	anw6410_dm9000_enable();
+
+	platform_add_devices(anw6410_devices, ARRAY_SIZE(anw6410_devices));
+}
+
+MACHINE_START(ANW6410, "A&W6410")
+	/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= anw6410_map_io,
+	.init_machine	= anw6410_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
-- 
cgit v1.2.3


From 5a9eb8da8b95fce21eb2dd39fe71b2b7882ce89a Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 19 Mar 2009 15:02:33 +0000
Subject: [ARM] S3C24XX: Move plat/dma.h

Move the platform dma.h to dma-plat.h to ensure it doen't get
confused with plat/dma.h

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/dma.c                   |  2 +-
 arch/arm/mach-s3c2412/dma.c                   |  2 +-
 arch/arm/mach-s3c2440/dma.c                   |  2 +-
 arch/arm/mach-s3c2443/dma.c                   |  2 +-
 arch/arm/plat-s3c24xx/dma.c                   |  2 +-
 arch/arm/plat-s3c24xx/include/plat/dma-plat.h | 82 +++++++++++++++++++++++++++
 arch/arm/plat-s3c24xx/include/plat/dma.h      | 82 ---------------------------
 7 files changed, 87 insertions(+), 87 deletions(-)
 create mode 100644 arch/arm/plat-s3c24xx/include/plat/dma-plat.h
 delete mode 100644 arch/arm/plat-s3c24xx/include/plat/dma.h

diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 440c014e24b..6248f412f67 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -20,7 +20,7 @@
 #include <mach/dma.h>
 
 #include <plat/cpu.h>
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 9e3478506c6..f888d4e01b0 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -20,7 +20,7 @@
 
 #include <mach/dma.h>
 
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index 69b6cf34df4..895783fe8b5 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -19,7 +19,7 @@
 
 #include <mach/dma.h>
 
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index 8430e582918..825b718a63a 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -20,7 +20,7 @@
 
 #include <mach/dma.h>
 
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index aee2aeb46c6..d3d1375d95b 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -34,7 +34,7 @@
 
 #include <mach/map.h>
 
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
 
 /* io map for dma */
 static void __iomem *dma_base;
diff --git a/arch/arm/plat-s3c24xx/include/plat/dma-plat.h b/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
new file mode 100644
index 00000000000..fbe84afe2d9
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
@@ -0,0 +1,82 @@
+/* linux/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C24XX DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern struct sysdev_class dma_sysclass;
+extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
+
+#define DMA_CH_VALID		(1<<31)
+#define DMA_CH_NEVER		(1<<30)
+
+struct s3c24xx_dma_addr {
+	unsigned long		from;
+	unsigned long		to;
+};
+
+/* struct s3c24xx_dma_map
+ *
+ * this holds the mapping information for the channel selected
+ * to be connected to the specified device
+*/
+
+struct s3c24xx_dma_map {
+	const char		*name;
+	struct s3c24xx_dma_addr  hw_addr;
+
+	unsigned long		 channels[S3C2410_DMA_CHANNELS];
+	unsigned long		 channels_rx[S3C2410_DMA_CHANNELS];
+};
+
+struct s3c24xx_dma_selection {
+	struct s3c24xx_dma_map	*map;
+	unsigned long		 map_size;
+	unsigned long		 dcon_mask;
+
+	void	(*select)(struct s3c2410_dma_chan *chan,
+			  struct s3c24xx_dma_map *map);
+
+	void	(*direction)(struct s3c2410_dma_chan *chan,
+			     struct s3c24xx_dma_map *map,
+			     enum s3c2410_dmasrc dir);
+};
+
+extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
+
+/* struct s3c24xx_dma_order_ch
+ *
+ * channel map for one of the `enum dma_ch` dma channels. the list
+ * entry contains a set of low-level channel numbers, orred with
+ * DMA_CH_VALID, which are checked in the order in the array.
+*/
+
+struct s3c24xx_dma_order_ch {
+	unsigned int	list[S3C2410_DMA_CHANNELS];	/* list of channels */
+	unsigned int	flags;				/* flags */
+};
+
+/* struct s3c24xx_dma_order
+ *
+ * information provided by either the core or the board to give the
+ * dma system a hint on how to allocate channels
+*/
+
+struct s3c24xx_dma_order {
+	struct s3c24xx_dma_order_ch	channels[DMACH_MAX];
+};
+
+extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map);
+
+/* DMA init code, called from the cpu support code */
+
+extern int s3c2410_dma_init(void);
+
+extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq,
+			    unsigned int stride);
diff --git a/arch/arm/plat-s3c24xx/include/plat/dma.h b/arch/arm/plat-s3c24xx/include/plat/dma.h
deleted file mode 100644
index c78efe316fc..00000000000
--- a/arch/arm/plat-s3c24xx/include/plat/dma.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/dma.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C24XX DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern struct sysdev_class dma_sysclass;
-extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
-
-#define DMA_CH_VALID		(1<<31)
-#define DMA_CH_NEVER		(1<<30)
-
-struct s3c24xx_dma_addr {
-	unsigned long		from;
-	unsigned long		to;
-};
-
-/* struct s3c24xx_dma_map
- *
- * this holds the mapping information for the channel selected
- * to be connected to the specified device
-*/
-
-struct s3c24xx_dma_map {
-	const char		*name;
-	struct s3c24xx_dma_addr  hw_addr;
-
-	unsigned long		 channels[S3C2410_DMA_CHANNELS];
-	unsigned long		 channels_rx[S3C2410_DMA_CHANNELS];
-};
-
-struct s3c24xx_dma_selection {
-	struct s3c24xx_dma_map	*map;
-	unsigned long		 map_size;
-	unsigned long		 dcon_mask;
-
-	void	(*select)(struct s3c2410_dma_chan *chan,
-			  struct s3c24xx_dma_map *map);
-
-	void	(*direction)(struct s3c2410_dma_chan *chan,
-			     struct s3c24xx_dma_map *map,
-			     enum s3c2410_dmasrc dir);
-};
-
-extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
-
-/* struct s3c24xx_dma_order_ch
- *
- * channel map for one of the `enum dma_ch` dma channels. the list
- * entry contains a set of low-level channel numbers, orred with
- * DMA_CH_VALID, which are checked in the order in the array.
-*/
-
-struct s3c24xx_dma_order_ch {
-	unsigned int	list[S3C2410_DMA_CHANNELS];	/* list of channels */
-	unsigned int	flags;				/* flags */
-};
-
-/* struct s3c24xx_dma_order
- *
- * information provided by either the core or the board to give the
- * dma system a hint on how to allocate channels
-*/
-
-struct s3c24xx_dma_order {
-	struct s3c24xx_dma_order_ch	channels[DMACH_MAX];
-};
-
-extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map);
-
-/* DMA init code, called from the cpu support code */
-
-extern int s3c2410_dma_init(void);
-
-extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq,
-			    unsigned int stride);
-- 
cgit v1.2.3


From 8970ef47d56fd3db28ee798b9d400caf08abd924 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 19 Mar 2009 15:02:34 +0000
Subject: [ARM] S3C24XX: Remove hardware specific registers from DMA calls

The S3C24XX DMA API channel configuration registers are being passed
values comprised of register values which makes it hard to move the
API to cover both the S3C24XX and S3C64XX.

These values can be calculated from knowing which device the channel
is connected to, so remove them from the two calls s3c2410_dma_config
and s3c2410_dma_devconfig.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/dma.h |  6 ++--
 arch/arm/plat-s3c24xx/dma.c              | 60 ++++++++++++++++++++++++--------
 drivers/mmc/host/s3cmci.c                |  2 +-
 sound/soc/s3c24xx/s3c24xx-pcm.c          | 21 ++++-------
 4 files changed, 57 insertions(+), 32 deletions(-)

diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index 13358ce2128..acaef6784e9 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -206,10 +206,10 @@ struct s3c2410_dma_chan {
 
 	/* channel configuration */
 	enum s3c2410_dmasrc	 source;
+	enum dma_ch		 req_ch;
 	unsigned long		 dev_addr;
 	unsigned long		 load_timeout;
 	unsigned int		 flags;		/* channel flags */
-	unsigned int		 hw_cfg;	/* last hw config */
 
 	struct s3c24xx_dma_map	*map;		/* channel hw maps */
 
@@ -290,7 +290,7 @@ extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
  * configure the dma channel
 */
 
-extern int s3c2410_dma_config(unsigned int channel, int xferunit, int dcon);
+extern int s3c2410_dma_config(unsigned int channel, int xferunit);
 
 /* s3c2410_dma_devconfig
  *
@@ -298,7 +298,7 @@ extern int s3c2410_dma_config(unsigned int channel, int xferunit, int dcon);
 */
 
 extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
-				 int hwcfg, unsigned long devaddr);
+				 unsigned long devaddr);
 
 /* s3c2410_dma_getposition
  *
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index d3d1375d95b..dc58a0ddc9f 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1038,14 +1038,13 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl);
 /* s3c2410_dma_config
  *
  * xfersize:     size of unit in bytes (1,2,4)
- * dcon:         base value of the DCONx register
 */
 
 int s3c2410_dma_config(unsigned int channel,
-		       int xferunit,
-		       int dcon)
+		       int xferunit)
 {
 	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	unsigned int dcon;
 
 	pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
 		 __func__, channel, xferunit, dcon);
@@ -1055,10 +1054,33 @@ int s3c2410_dma_config(unsigned int channel,
 
 	pr_debug("%s: Initial dcon is %08x\n", __func__, dcon);
 
-	dcon |= chan->dcon & dma_sel.dcon_mask;
+	dcon = chan->dcon & dma_sel.dcon_mask;
 
 	pr_debug("%s: New dcon is %08x\n", __func__, dcon);
 
+	switch (chan->req_ch) {
+	case DMACH_I2S_IN:
+	case DMACH_I2S_OUT:
+	case DMACH_PCM_IN:
+	case DMACH_PCM_OUT:
+	case DMACH_MIC_IN:
+	default:
+		dcon |= S3C2410_DCON_HANDSHAKE;
+		dcon |= S3C2410_DCON_SYNC_PCLK;
+		break;
+
+	case DMACH_SDI:
+		/* note, ensure if need HANDSHAKE or not */
+		dcon |= S3C2410_DCON_SYNC_PCLK;
+		break;
+
+	case DMACH_XD0:
+	case DMACH_XD1:
+		dcon |= S3C2410_DCON_HANDSHAKE;
+		dcon |= S3C2410_DCON_SYNC_HCLK;
+		break;
+	}
+
 	switch (xferunit) {
 	case 1:
 		dcon |= S3C2410_DCON_BYTE;
@@ -1150,29 +1172,38 @@ EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
  * source:    S3C2410_DMASRC_HW: source is hardware
  *            S3C2410_DMASRC_MEM: source is memory
  *
- * hwcfg:     the value for xxxSTCn register,
- *            bit 0: 0=increment pointer, 1=leave pointer
- *            bit 1: 0=source is AHB, 1=source is APB
- *
  * devaddr:   physical address of the source
 */
 
 int s3c2410_dma_devconfig(int channel,
 			  enum s3c2410_dmasrc source,
-			  int hwcfg,
 			  unsigned long devaddr)
 {
 	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	unsigned int hwcfg;
 
 	if (chan == NULL)
 		return -EINVAL;
 
-	pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
-		 __func__, (int)source, hwcfg, devaddr);
+	pr_debug("%s: source=%d, devaddr=%08lx\n",
+		 __func__, (int)source, devaddr);
 
 	chan->source = source;
 	chan->dev_addr = devaddr;
-	chan->hw_cfg = hwcfg;
+
+	switch (chan->req_ch) {
+	case DMACH_XD0:
+	case DMACH_XD1:
+		hwcfg = 0; /* AHB */
+		break;
+
+	default:
+		hwcfg = S3C2410_DISRCC_APB;
+	}
+
+	/* always assume our peripheral desintation is a fixed
+	 * address in memory. */
+	 hwcfg |= S3C2410_DISRCC_INC;
 
 	switch (source) {
 	case S3C2410_DMASRC_HW:
@@ -1278,8 +1309,8 @@ static int s3c2410_dma_resume(struct sys_device *dev)
 
 	printk(KERN_INFO "dma%d: restoring configuration\n", cp->number);
 
-	s3c2410_dma_config(no, cp->xfer_unit, cp->dcon);
-	s3c2410_dma_devconfig(no, cp->source, cp->hw_cfg, cp->dev_addr);
+	s3c2410_dma_config(no, cp->xfer_unit);
+	s3c2410_dma_devconfig(no, cp->source, cp->dev_addr);
 
 	/* re-select the dma source for this channel */
 
@@ -1476,6 +1507,7 @@ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
  found:
 	dmach = &s3c2410_chans[ch];
 	dmach->map = ch_map;
+	dmach->req_ch = channel;
 	dma_chan_map[channel] = dmach;
 
 	/* select the channel */
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 2db166b7096..889f35047a5 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -789,7 +789,7 @@ static void s3cmci_dma_setup(struct s3cmci_host *host,
 
 	last_source = source;
 
-	s3c2410_dma_devconfig(host->dma, source, 3,
+	s3c2410_dma_devconfig(host->dma, source,
 			      host->mem->start + host->sdidata);
 
 	if (!setup_ok) {
diff --git a/sound/soc/s3c24xx/s3c24xx-pcm.c b/sound/soc/s3c24xx/s3c24xx-pcm.c
index 169ddad3157..eecfa5eba06 100644
--- a/sound/soc/s3c24xx/s3c24xx-pcm.c
+++ b/sound/soc/s3c24xx/s3c24xx-pcm.c
@@ -218,24 +218,17 @@ static int s3c24xx_pcm_prepare(struct snd_pcm_substream *substream)
 	 * sync to pclk, half-word transfers to the IIS-FIFO. */
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		s3c2410_dma_devconfig(prtd->params->channel,
-				S3C2410_DMASRC_MEM, S3C2410_DISRCC_INC |
-				S3C2410_DISRCC_APB, prtd->params->dma_addr);
-
-		s3c2410_dma_config(prtd->params->channel,
-				prtd->params->dma_size,
-				S3C2410_DCON_SYNC_PCLK |
-				S3C2410_DCON_HANDSHAKE);
+				      S3C2410_DMASRC_MEM,
+				      prtd->params->dma_addr);
 	} else {
-		s3c2410_dma_config(prtd->params->channel,
-				prtd->params->dma_size,
-				S3C2410_DCON_HANDSHAKE |
-				S3C2410_DCON_SYNC_PCLK);
-
 		s3c2410_dma_devconfig(prtd->params->channel,
-					S3C2410_DMASRC_HW, 0x3,
-					prtd->params->dma_addr);
+				      S3C2410_DMASRC_HW,
+				      prtd->params->dma_addr);
 	}
 
+	s3c2410_dma_config(prtd->params->channel,
+			   prtd->params->dma_size);
+
 	/* flush the DMA channel */
 	s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
 	prtd->dma_loaded = 0;
-- 
cgit v1.2.3


From 44dc94045f6ddbc07db3e0eb3448c2efc13ac2cf Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 19 Mar 2009 15:02:35 +0000
Subject: [ARM] S3C24XX: DMA: Split hardware regs out of <mach/dma.h>

The <mach/dma.h> is for the driver API for the DMA system and should
not have anything relying on the CPU specific registers.

Remove the registers to <plat/dma-regs.h> for the code that really
needs to know about them.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/dma.c                   |   1 +
 arch/arm/mach-s3c2410/include/mach/dma.h      | 137 +-----------------------
 arch/arm/mach-s3c2412/dma.c                   |   1 +
 arch/arm/mach-s3c2440/dma.c                   |   2 +
 arch/arm/mach-s3c2443/dma.c                   |   1 +
 arch/arm/plat-s3c24xx/dma.c                   |   2 +-
 arch/arm/plat-s3c24xx/include/plat/regs-dma.h | 145 ++++++++++++++++++++++++++
 7 files changed, 152 insertions(+), 137 deletions(-)
 create mode 100644 arch/arm/plat-s3c24xx/include/plat/regs-dma.h

diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 6248f412f67..aba159f7bb2 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -25,6 +25,7 @@
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index acaef6784e9..6cefa56e6a1 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -3,7 +3,7 @@
  * Copyright (C) 2003,2004,2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * Samsung S3C241XX DMA support
+ * Samsung S3C24XX DMA support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -68,7 +68,6 @@ enum s3c2410_dma_state {
 	S3C2410_DMA_PAUSED
 };
 
-
 /* enum s3c2410_dma_loadst
  *
  * This represents the state of the DMA engine, wrt to the loaded / running
@@ -311,138 +310,4 @@ extern int s3c2410_dma_getposition(unsigned int channel,
 extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
 extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
 
-/* DMA Register definitions */
-
-#define S3C2410_DMA_DISRC       (0x00)
-#define S3C2410_DMA_DISRCC      (0x04)
-#define S3C2410_DMA_DIDST       (0x08)
-#define S3C2410_DMA_DIDSTC      (0x0C)
-#define S3C2410_DMA_DCON        (0x10)
-#define S3C2410_DMA_DSTAT       (0x14)
-#define S3C2410_DMA_DCSRC       (0x18)
-#define S3C2410_DMA_DCDST       (0x1C)
-#define S3C2410_DMA_DMASKTRIG   (0x20)
-#define S3C2412_DMA_DMAREQSEL	(0x24)
-#define S3C2443_DMA_DMAREQSEL	(0x24)
-
-#define S3C2410_DISRCC_INC	(1<<0)
-#define S3C2410_DISRCC_APB	(1<<1)
-
-#define S3C2410_DMASKTRIG_STOP   (1<<2)
-#define S3C2410_DMASKTRIG_ON     (1<<1)
-#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
-
-#define S3C2410_DCON_DEMAND     (0<<31)
-#define S3C2410_DCON_HANDSHAKE  (1<<31)
-#define S3C2410_DCON_SYNC_PCLK  (0<<30)
-#define S3C2410_DCON_SYNC_HCLK  (1<<30)
-
-#define S3C2410_DCON_INTREQ     (1<<29)
-
-#define S3C2410_DCON_CH0_XDREQ0	(0<<24)
-#define S3C2410_DCON_CH0_UART0	(1<<24)
-#define S3C2410_DCON_CH0_SDI	(2<<24)
-#define S3C2410_DCON_CH0_TIMER	(3<<24)
-#define S3C2410_DCON_CH0_USBEP1	(4<<24)
-
-#define S3C2410_DCON_CH1_XDREQ1	(0<<24)
-#define S3C2410_DCON_CH1_UART1	(1<<24)
-#define S3C2410_DCON_CH1_I2SSDI	(2<<24)
-#define S3C2410_DCON_CH1_SPI	(3<<24)
-#define S3C2410_DCON_CH1_USBEP2	(4<<24)
-
-#define S3C2410_DCON_CH2_I2SSDO	(0<<24)
-#define S3C2410_DCON_CH2_I2SSDI	(1<<24)
-#define S3C2410_DCON_CH2_SDI	(2<<24)
-#define S3C2410_DCON_CH2_TIMER	(3<<24)
-#define S3C2410_DCON_CH2_USBEP3	(4<<24)
-
-#define S3C2410_DCON_CH3_UART2	(0<<24)
-#define S3C2410_DCON_CH3_SDI	(1<<24)
-#define S3C2410_DCON_CH3_SPI	(2<<24)
-#define S3C2410_DCON_CH3_TIMER	(3<<24)
-#define S3C2410_DCON_CH3_USBEP4	(4<<24)
-
-#define S3C2410_DCON_SRCSHIFT   (24)
-#define S3C2410_DCON_SRCMASK	(7<<24)
-
-#define S3C2410_DCON_BYTE       (0<<20)
-#define S3C2410_DCON_HALFWORD   (1<<20)
-#define S3C2410_DCON_WORD       (2<<20)
-
-#define S3C2410_DCON_AUTORELOAD (0<<22)
-#define S3C2410_DCON_NORELOAD   (1<<22)
-#define S3C2410_DCON_HWTRIG     (1<<23)
-
-#ifdef CONFIG_CPU_S3C2440
-#define S3C2440_DIDSTC_CHKINT	(1<<2)
-
-#define S3C2440_DCON_CH0_I2SSDO	(5<<24)
-#define S3C2440_DCON_CH0_PCMIN	(6<<24)
-
-#define S3C2440_DCON_CH1_PCMOUT	(5<<24)
-#define S3C2440_DCON_CH1_SDI	(6<<24)
-
-#define S3C2440_DCON_CH2_PCMIN	(5<<24)
-#define S3C2440_DCON_CH2_MICIN	(6<<24)
-
-#define S3C2440_DCON_CH3_MICIN	(5<<24)
-#define S3C2440_DCON_CH3_PCMOUT	(6<<24)
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-
-#define S3C2412_DMAREQSEL_SRC(x)	((x)<<1)
-
-#define S3C2412_DMAREQSEL_HW		(1)
-
-#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
-#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
-#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
-#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
-#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
-#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
-#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
-#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
-#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
-#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
-#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
-#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
-#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
-#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
-#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
-#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
-#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
-#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
-#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
-#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
-
-#endif
-
-#define S3C2443_DMAREQSEL_SRC(x)	((x)<<1)
-
-#define S3C2443_DMAREQSEL_HW		(1)
-
-#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
-#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
-#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
-#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
-#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
-#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
-#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
-#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
-#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
-#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
-#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
-#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
-#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
-#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
-#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
-#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
-#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
-#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
-#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
-#define S3C2443_DMAREQSEL_PCMIN 	S3C2443_DMAREQSEL_SRC(28)
-#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
-
 #endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index f888d4e01b0..f8d16fc10bc 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -26,6 +26,7 @@
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index 895783fe8b5..e08e081430f 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -17,6 +17,7 @@
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 
+#include <mach/map.h>
 #include <mach/dma.h>
 
 #include <plat/dma-plat.h>
@@ -25,6 +26,7 @@
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index 825b718a63a..397f3b5c0b4 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -26,6 +26,7 @@
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index dc58a0ddc9f..7c37c9a7532 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -31,10 +31,10 @@
 #include <asm/irq.h>
 #include <mach/hardware.h>
 #include <mach/dma.h>
-
 #include <mach/map.h>
 
 #include <plat/dma-plat.h>
+#include <plat/regs-dma.h>
 
 /* io map for dma */
 static void __iomem *dma_base;
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
new file mode 100644
index 00000000000..d38e7b76c26
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
@@ -0,0 +1,145 @@
+/* arch/arm/mach-s3c2410/include/mach/dma.h
+ *
+ * Copyright (C) 2003,2004,2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C24XX DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* DMA Register definitions */
+
+#define S3C2410_DMA_DISRC       (0x00)
+#define S3C2410_DMA_DISRCC      (0x04)
+#define S3C2410_DMA_DIDST       (0x08)
+#define S3C2410_DMA_DIDSTC      (0x0C)
+#define S3C2410_DMA_DCON        (0x10)
+#define S3C2410_DMA_DSTAT       (0x14)
+#define S3C2410_DMA_DCSRC       (0x18)
+#define S3C2410_DMA_DCDST       (0x1C)
+#define S3C2410_DMA_DMASKTRIG   (0x20)
+#define S3C2412_DMA_DMAREQSEL	(0x24)
+#define S3C2443_DMA_DMAREQSEL	(0x24)
+
+#define S3C2410_DISRCC_INC	(1<<0)
+#define S3C2410_DISRCC_APB	(1<<1)
+
+#define S3C2410_DMASKTRIG_STOP   (1<<2)
+#define S3C2410_DMASKTRIG_ON     (1<<1)
+#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
+
+#define S3C2410_DCON_DEMAND     (0<<31)
+#define S3C2410_DCON_HANDSHAKE  (1<<31)
+#define S3C2410_DCON_SYNC_PCLK  (0<<30)
+#define S3C2410_DCON_SYNC_HCLK  (1<<30)
+
+#define S3C2410_DCON_INTREQ     (1<<29)
+
+#define S3C2410_DCON_CH0_XDREQ0	(0<<24)
+#define S3C2410_DCON_CH0_UART0	(1<<24)
+#define S3C2410_DCON_CH0_SDI	(2<<24)
+#define S3C2410_DCON_CH0_TIMER	(3<<24)
+#define S3C2410_DCON_CH0_USBEP1	(4<<24)
+
+#define S3C2410_DCON_CH1_XDREQ1	(0<<24)
+#define S3C2410_DCON_CH1_UART1	(1<<24)
+#define S3C2410_DCON_CH1_I2SSDI	(2<<24)
+#define S3C2410_DCON_CH1_SPI	(3<<24)
+#define S3C2410_DCON_CH1_USBEP2	(4<<24)
+
+#define S3C2410_DCON_CH2_I2SSDO	(0<<24)
+#define S3C2410_DCON_CH2_I2SSDI	(1<<24)
+#define S3C2410_DCON_CH2_SDI	(2<<24)
+#define S3C2410_DCON_CH2_TIMER	(3<<24)
+#define S3C2410_DCON_CH2_USBEP3	(4<<24)
+
+#define S3C2410_DCON_CH3_UART2	(0<<24)
+#define S3C2410_DCON_CH3_SDI	(1<<24)
+#define S3C2410_DCON_CH3_SPI	(2<<24)
+#define S3C2410_DCON_CH3_TIMER	(3<<24)
+#define S3C2410_DCON_CH3_USBEP4	(4<<24)
+
+#define S3C2410_DCON_SRCSHIFT   (24)
+#define S3C2410_DCON_SRCMASK	(7<<24)
+
+#define S3C2410_DCON_BYTE       (0<<20)
+#define S3C2410_DCON_HALFWORD   (1<<20)
+#define S3C2410_DCON_WORD       (2<<20)
+
+#define S3C2410_DCON_AUTORELOAD (0<<22)
+#define S3C2410_DCON_NORELOAD   (1<<22)
+#define S3C2410_DCON_HWTRIG     (1<<23)
+
+#ifdef CONFIG_CPU_S3C2440
+#define S3C2440_DIDSTC_CHKINT	(1<<2)
+
+#define S3C2440_DCON_CH0_I2SSDO	(5<<24)
+#define S3C2440_DCON_CH0_PCMIN	(6<<24)
+
+#define S3C2440_DCON_CH1_PCMOUT	(5<<24)
+#define S3C2440_DCON_CH1_SDI	(6<<24)
+
+#define S3C2440_DCON_CH2_PCMIN	(5<<24)
+#define S3C2440_DCON_CH2_MICIN	(6<<24)
+
+#define S3C2440_DCON_CH3_MICIN	(5<<24)
+#define S3C2440_DCON_CH3_PCMOUT	(6<<24)
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+
+#define S3C2412_DMAREQSEL_SRC(x)	((x)<<1)
+
+#define S3C2412_DMAREQSEL_HW		(1)
+
+#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
+#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
+#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
+#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
+#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
+#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
+#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
+#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
+#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
+#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
+#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
+#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
+#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
+#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
+#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
+#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
+#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
+#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
+#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
+#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
+
+#endif
+
+#define S3C2443_DMAREQSEL_SRC(x)	((x)<<1)
+
+#define S3C2443_DMAREQSEL_HW		(1)
+
+#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
+#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
+#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
+#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
+#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
+#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
+#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
+#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
+#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
+#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
+#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
+#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
+#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
+#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
+#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
+#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
+#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
+#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
+#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
+#define S3C2443_DMAREQSEL_PCMIN 	S3C2443_DMAREQSEL_SRC(28)
+#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
-- 
cgit v1.2.3


From 023b40cd1018915beb5a519b55ea174683215f16 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 19 Mar 2009 15:02:36 +0000
Subject: [ARM] S3C24XX: Fix indentation in <plat/dma-regs.h>

The <plat/dma-regs.h> pre-date the invention of the TAB character,
so fix the indentation of the register defines.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/include/plat/regs-dma.h | 138 +++++++++++++-------------
 1 file changed, 69 insertions(+), 69 deletions(-)

diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
index d38e7b76c26..3bc0a216df9 100644
--- a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
+++ b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
@@ -12,81 +12,81 @@
 
 /* DMA Register definitions */
 
-#define S3C2410_DMA_DISRC       (0x00)
-#define S3C2410_DMA_DISRCC      (0x04)
-#define S3C2410_DMA_DIDST       (0x08)
-#define S3C2410_DMA_DIDSTC      (0x0C)
-#define S3C2410_DMA_DCON        (0x10)
-#define S3C2410_DMA_DSTAT       (0x14)
-#define S3C2410_DMA_DCSRC       (0x18)
-#define S3C2410_DMA_DCDST       (0x1C)
-#define S3C2410_DMA_DMASKTRIG   (0x20)
-#define S3C2412_DMA_DMAREQSEL	(0x24)
-#define S3C2443_DMA_DMAREQSEL	(0x24)
-
-#define S3C2410_DISRCC_INC	(1<<0)
-#define S3C2410_DISRCC_APB	(1<<1)
-
-#define S3C2410_DMASKTRIG_STOP   (1<<2)
-#define S3C2410_DMASKTRIG_ON     (1<<1)
-#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
-
-#define S3C2410_DCON_DEMAND     (0<<31)
-#define S3C2410_DCON_HANDSHAKE  (1<<31)
-#define S3C2410_DCON_SYNC_PCLK  (0<<30)
-#define S3C2410_DCON_SYNC_HCLK  (1<<30)
-
-#define S3C2410_DCON_INTREQ     (1<<29)
-
-#define S3C2410_DCON_CH0_XDREQ0	(0<<24)
-#define S3C2410_DCON_CH0_UART0	(1<<24)
-#define S3C2410_DCON_CH0_SDI	(2<<24)
-#define S3C2410_DCON_CH0_TIMER	(3<<24)
-#define S3C2410_DCON_CH0_USBEP1	(4<<24)
-
-#define S3C2410_DCON_CH1_XDREQ1	(0<<24)
-#define S3C2410_DCON_CH1_UART1	(1<<24)
-#define S3C2410_DCON_CH1_I2SSDI	(2<<24)
-#define S3C2410_DCON_CH1_SPI	(3<<24)
-#define S3C2410_DCON_CH1_USBEP2	(4<<24)
-
-#define S3C2410_DCON_CH2_I2SSDO	(0<<24)
-#define S3C2410_DCON_CH2_I2SSDI	(1<<24)
-#define S3C2410_DCON_CH2_SDI	(2<<24)
-#define S3C2410_DCON_CH2_TIMER	(3<<24)
-#define S3C2410_DCON_CH2_USBEP3	(4<<24)
-
-#define S3C2410_DCON_CH3_UART2	(0<<24)
-#define S3C2410_DCON_CH3_SDI	(1<<24)
-#define S3C2410_DCON_CH3_SPI	(2<<24)
-#define S3C2410_DCON_CH3_TIMER	(3<<24)
-#define S3C2410_DCON_CH3_USBEP4	(4<<24)
-
-#define S3C2410_DCON_SRCSHIFT   (24)
-#define S3C2410_DCON_SRCMASK	(7<<24)
-
-#define S3C2410_DCON_BYTE       (0<<20)
-#define S3C2410_DCON_HALFWORD   (1<<20)
-#define S3C2410_DCON_WORD       (2<<20)
-
-#define S3C2410_DCON_AUTORELOAD (0<<22)
-#define S3C2410_DCON_NORELOAD   (1<<22)
-#define S3C2410_DCON_HWTRIG     (1<<23)
+#define S3C2410_DMA_DISRC		(0x00)
+#define S3C2410_DMA_DISRCC		(0x04)
+#define S3C2410_DMA_DIDST		(0x08)
+#define S3C2410_DMA_DIDSTC		(0x0C)
+#define S3C2410_DMA_DCON		(0x10)
+#define S3C2410_DMA_DSTAT		(0x14)
+#define S3C2410_DMA_DCSRC		(0x18)
+#define S3C2410_DMA_DCDST		(0x1C)
+#define S3C2410_DMA_DMASKTRIG		(0x20)
+#define S3C2412_DMA_DMAREQSEL		(0x24)
+#define S3C2443_DMA_DMAREQSEL		(0x24)
+
+#define S3C2410_DISRCC_INC		(1<<0)
+#define S3C2410_DISRCC_APB		(1<<1)
+
+#define S3C2410_DMASKTRIG_STOP		(1<<2)
+#define S3C2410_DMASKTRIG_ON		(1<<1)
+#define S3C2410_DMASKTRIG_SWTRIG	(1<<0)
+
+#define S3C2410_DCON_DEMAND		(0<<31)
+#define S3C2410_DCON_HANDSHAKE		(1<<31)
+#define S3C2410_DCON_SYNC_PCLK		(0<<30)
+#define S3C2410_DCON_SYNC_HCLK		(1<<30)
+
+#define S3C2410_DCON_INTREQ		(1<<29)
+
+#define S3C2410_DCON_CH0_XDREQ0		(0<<24)
+#define S3C2410_DCON_CH0_UART0		(1<<24)
+#define S3C2410_DCON_CH0_SDI		(2<<24)
+#define S3C2410_DCON_CH0_TIMER		(3<<24)
+#define S3C2410_DCON_CH0_USBEP1		(4<<24)
+
+#define S3C2410_DCON_CH1_XDREQ1		(0<<24)
+#define S3C2410_DCON_CH1_UART1		(1<<24)
+#define S3C2410_DCON_CH1_I2SSDI		(2<<24)
+#define S3C2410_DCON_CH1_SPI		(3<<24)
+#define S3C2410_DCON_CH1_USBEP2		(4<<24)
+
+#define S3C2410_DCON_CH2_I2SSDO		(0<<24)
+#define S3C2410_DCON_CH2_I2SSDI		(1<<24)
+#define S3C2410_DCON_CH2_SDI		(2<<24)
+#define S3C2410_DCON_CH2_TIMER		(3<<24)
+#define S3C2410_DCON_CH2_USBEP3		(4<<24)
+
+#define S3C2410_DCON_CH3_UART2		(0<<24)
+#define S3C2410_DCON_CH3_SDI		(1<<24)
+#define S3C2410_DCON_CH3_SPI		(2<<24)
+#define S3C2410_DCON_CH3_TIMER		(3<<24)
+#define S3C2410_DCON_CH3_USBEP4		(4<<24)
+
+#define S3C2410_DCON_SRCSHIFT		(24)
+#define S3C2410_DCON_SRCMASK		(7<<24)
+
+#define S3C2410_DCON_BYTE		(0<<20)
+#define S3C2410_DCON_HALFWORD		(1<<20)
+#define S3C2410_DCON_WORD		(2<<20)
+
+#define S3C2410_DCON_AUTORELOAD		(0<<22)
+#define S3C2410_DCON_NORELOAD		(1<<22)
+#define S3C2410_DCON_HWTRIG		(1<<23)
 
 #ifdef CONFIG_CPU_S3C2440
-#define S3C2440_DIDSTC_CHKINT	(1<<2)
+#define S3C2440_DIDSTC_CHKINT		(1<<2)
 
-#define S3C2440_DCON_CH0_I2SSDO	(5<<24)
-#define S3C2440_DCON_CH0_PCMIN	(6<<24)
+#define S3C2440_DCON_CH0_I2SSDO		(5<<24)
+#define S3C2440_DCON_CH0_PCMIN		(6<<24)
 
-#define S3C2440_DCON_CH1_PCMOUT	(5<<24)
-#define S3C2440_DCON_CH1_SDI	(6<<24)
+#define S3C2440_DCON_CH1_PCMOUT		(5<<24)
+#define S3C2440_DCON_CH1_SDI		(6<<24)
 
-#define S3C2440_DCON_CH2_PCMIN	(5<<24)
-#define S3C2440_DCON_CH2_MICIN	(6<<24)
+#define S3C2440_DCON_CH2_PCMIN		(5<<24)
+#define S3C2440_DCON_CH2_MICIN		(6<<24)
 
-#define S3C2440_DCON_CH3_MICIN	(5<<24)
-#define S3C2440_DCON_CH3_PCMOUT	(6<<24)
+#define S3C2440_DCON_CH3_MICIN		(5<<24)
+#define S3C2440_DCON_CH3_PCMOUT		(6<<24)
 #endif
 
 #ifdef CONFIG_CPU_S3C2412
-- 
cgit v1.2.3


From c133c290118bfc99cd7a23b5a00b5252d2be90c8 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 19 Mar 2009 15:02:37 +0000
Subject: [ARM] S3C: Make common <plat/dma.h> header

Move the common information from the <mach/dma.h> header into a new
shareable <plat/dma.h> header for re-use on the s3c64xx.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/dma.h | 117 +---------------------------
 arch/arm/plat-s3c/include/plat/dma.h     | 127 +++++++++++++++++++++++++++++++
 2 files changed, 130 insertions(+), 114 deletions(-)
 create mode 100644 arch/arm/plat-s3c/include/plat/dma.h

diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index 6cefa56e6a1..2fbabecf4f6 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -13,6 +13,7 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H __FILE__
 
+#include <plat/dma.h>
 #include <linux/sysdev.h>
 #include <mach/hardware.h>
 
@@ -103,32 +104,6 @@ enum s3c2410_dma_loadst {
 	S3C2410_DMALOAD_1LOADED_1RUNNING,
 };
 
-enum s3c2410_dma_buffresult {
-	S3C2410_RES_OK,
-	S3C2410_RES_ERR,
-	S3C2410_RES_ABORT
-};
-
-enum s3c2410_dmasrc {
-	S3C2410_DMASRC_HW,		/* source is memory */
-	S3C2410_DMASRC_MEM		/* source is hardware */
-};
-
-/* enum s3c2410_chan_op
- *
- * operation codes passed to the DMA code by the user, and also used
- * to inform the current channel owner of any changes to the system state
-*/
-
-enum s3c2410_chan_op {
-	S3C2410_DMAOP_START,
-	S3C2410_DMAOP_STOP,
-	S3C2410_DMAOP_PAUSE,
-	S3C2410_DMAOP_RESUME,
-	S3C2410_DMAOP_FLUSH,
-	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
-	S3C2410_DMAOP_STARTED,		/* indicate channel started */
-};
 
 /* flags */
 
@@ -138,17 +113,14 @@ enum s3c2410_chan_op {
 
 /* dma buffer */
 
-struct s3c2410_dma_client {
-	char                *name;
-};
+struct s3c2410_dma_buf;
 
-/* s3c2410_dma_buf_s
+/* s3c2410_dma_buf
  *
  * internally used buffer structure to describe a queued or running
  * buffer.
 */
 
-struct s3c2410_dma_buf;
 struct s3c2410_dma_buf {
 	struct s3c2410_dma_buf	*next;
 	int			 magic;		/* magic */
@@ -160,20 +132,6 @@ struct s3c2410_dma_buf {
 
 /* [1] is this updated for both recv/send modes? */
 
-struct s3c2410_dma_chan;
-
-/* s3c2410_dma_cbfn_t
- *
- * buffer callback routine type
-*/
-
-typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
-				   void *buf, int size,
-				   enum s3c2410_dma_buffresult result);
-
-typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
-				   enum s3c2410_chan_op );
-
 struct s3c2410_dma_stats {
 	unsigned long		loads;
 	unsigned long		timeout_longest;
@@ -241,73 +199,4 @@ extern struct s3c2410_dma_chan s3c2410_chans[];
 /* note, we don't really use dma_device_t at the moment */
 typedef unsigned long dma_device_t;
 
-/* functions --------------------------------------------------------------- */
-
-/* s3c2410_dma_request
- *
- * request a dma channel exclusivley
-*/
-
-extern int s3c2410_dma_request(unsigned int channel,
-			       struct s3c2410_dma_client *, void *dev);
-
-
-/* s3c2410_dma_ctrl
- *
- * change the state of the dma channel
-*/
-
-extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
-
-/* s3c2410_dma_setflags
- *
- * set the channel's flags to a given state
-*/
-
-extern int s3c2410_dma_setflags(unsigned int channel,
-				unsigned int flags);
-
-/* s3c2410_dma_free
- *
- * free the dma channel (will also abort any outstanding operations)
-*/
-
-extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
-
-/* s3c2410_dma_enqueue
- *
- * place the given buffer onto the queue of operations for the channel.
- * The buffer must be allocated from dma coherent memory, or the Dcache/WB
- * drained before the buffer is given to the DMA system.
-*/
-
-extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
-			       dma_addr_t data, int size);
-
-/* s3c2410_dma_config
- *
- * configure the dma channel
-*/
-
-extern int s3c2410_dma_config(unsigned int channel, int xferunit);
-
-/* s3c2410_dma_devconfig
- *
- * configure the device we're talking to
-*/
-
-extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
-				 unsigned long devaddr);
-
-/* s3c2410_dma_getposition
- *
- * get the position that the dma transfer is currently at
-*/
-
-extern int s3c2410_dma_getposition(unsigned int channel,
-				   dma_addr_t *src, dma_addr_t *dest);
-
-extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
-extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
-
 #endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/plat-s3c/include/plat/dma.h b/arch/arm/plat-s3c/include/plat/dma.h
new file mode 100644
index 00000000000..34dba98f08e
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/dma.h
@@ -0,0 +1,127 @@
+/* arch/arm/plat-s3c/include/plat/dma.h
+ *
+ * Copyright (C) 2003,2004,2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+enum s3c2410_dma_buffresult {
+	S3C2410_RES_OK,
+	S3C2410_RES_ERR,
+	S3C2410_RES_ABORT
+};
+
+enum s3c2410_dmasrc {
+	S3C2410_DMASRC_HW,		/* source is memory */
+	S3C2410_DMASRC_MEM		/* source is hardware */
+};
+
+/* enum s3c2410_chan_op
+ *
+ * operation codes passed to the DMA code by the user, and also used
+ * to inform the current channel owner of any changes to the system state
+*/
+
+enum s3c2410_chan_op {
+	S3C2410_DMAOP_START,
+	S3C2410_DMAOP_STOP,
+	S3C2410_DMAOP_PAUSE,
+	S3C2410_DMAOP_RESUME,
+	S3C2410_DMAOP_FLUSH,
+	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
+	S3C2410_DMAOP_STARTED,		/* indicate channel started */
+};
+
+struct s3c2410_dma_client {
+	char                *name;
+};
+
+struct s3c2410_dma_chan;
+
+/* s3c2410_dma_cbfn_t
+ *
+ * buffer callback routine type
+*/
+
+typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
+				   void *buf, int size,
+				   enum s3c2410_dma_buffresult result);
+
+typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
+				   enum s3c2410_chan_op );
+
+
+
+/* s3c2410_dma_request
+ *
+ * request a dma channel exclusivley
+*/
+
+extern int s3c2410_dma_request(unsigned int channel,
+			       struct s3c2410_dma_client *, void *dev);
+
+
+/* s3c2410_dma_ctrl
+ *
+ * change the state of the dma channel
+*/
+
+extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
+
+/* s3c2410_dma_setflags
+ *
+ * set the channel's flags to a given state
+*/
+
+extern int s3c2410_dma_setflags(unsigned int channel,
+				unsigned int flags);
+
+/* s3c2410_dma_free
+ *
+ * free the dma channel (will also abort any outstanding operations)
+*/
+
+extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
+
+/* s3c2410_dma_enqueue
+ *
+ * place the given buffer onto the queue of operations for the channel.
+ * The buffer must be allocated from dma coherent memory, or the Dcache/WB
+ * drained before the buffer is given to the DMA system.
+*/
+
+extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
+			       dma_addr_t data, int size);
+
+/* s3c2410_dma_config
+ *
+ * configure the dma channel
+*/
+
+extern int s3c2410_dma_config(unsigned int channel, int xferunit);
+
+/* s3c2410_dma_devconfig
+ *
+ * configure the device we're talking to
+*/
+
+extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
+				 unsigned long devaddr);
+
+/* s3c2410_dma_getposition
+ *
+ * get the position that the dma transfer is currently at
+*/
+
+extern int s3c2410_dma_getposition(unsigned int channel,
+				   dma_addr_t *src, dma_addr_t *dest);
+
+extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
+extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
+
+
-- 
cgit v1.2.3


From 20934cdbaae9c26a31d7f593c6a747c687ae79a1 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 19 Mar 2009 15:02:38 +0000
Subject: [ARM] S3C24XX: dma.h should not include <mach/hardware.h>

The dma.h header does not need to include <mach/hardware.h> as there
is nothing it depends on. Remove the include and fixup the couple of
places where <mach/map.h> was not explicitly included (dragged in
via <mach/hardware.h>)

Note, we have to fix arch/arm/plat-s3c24xx/pm.c which seems to rely
on having <mach/hardware.h> included by this method.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/dma.c              | 1 +
 arch/arm/mach-s3c2410/include/mach/dma.h | 1 -
 2 files changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index aba159f7bb2..dbf96e60d99 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -17,6 +17,7 @@
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 
+#include <mach/map.h>
 #include <mach/dma.h>
 
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index 2fbabecf4f6..1648311c7b4 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -15,7 +15,6 @@
 
 #include <plat/dma.h>
 #include <linux/sysdev.h>
-#include <mach/hardware.h>
 
 #define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
 
-- 
cgit v1.2.3


From 97c1b145231730e62dd71921ec653315a1da3aad Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 19 Mar 2009 15:02:39 +0000
Subject: [ARM] S3C: Move DMA channel management code to plat-s3c

Change the name of S3C2410_DMA_CHANNELS to S3C_DMA_CHANNELS in the process.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/dma.h      |  8 +--
 arch/arm/plat-s3c/Kconfig                     |  7 +++
 arch/arm/plat-s3c/Makefile                    |  4 ++
 arch/arm/plat-s3c/dma.c                       | 86 ++++++++++++++++++++++++++
 arch/arm/plat-s3c/include/plat/dma-core.h     | 22 +++++++
 arch/arm/plat-s3c24xx/Kconfig                 |  1 +
 arch/arm/plat-s3c24xx/dma.c                   | 87 +++------------------------
 arch/arm/plat-s3c24xx/include/plat/dma-plat.h | 10 +--
 8 files changed, 136 insertions(+), 89 deletions(-)
 create mode 100644 arch/arm/plat-s3c/dma.c
 create mode 100644 arch/arm/plat-s3c/include/plat/dma-core.h

diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index 1648311c7b4..c3a2629e0de 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -55,9 +55,9 @@ enum dma_ch {
 
 /* we have 4 dma channels */
 #ifndef CONFIG_CPU_S3C2443
-#define S3C2410_DMA_CHANNELS		(4)
+#define S3C_DMA_CHANNELS		(4)
 #else
-#define S3C2410_DMA_CHANNELS		(6)
+#define S3C_DMA_CHANNELS		(6)
 #endif
 
 /* types */
@@ -192,10 +192,6 @@ struct s3c2410_dma_chan {
 	struct sys_device	dev;
 };
 
-/* the currently allocated channel information */
-extern struct s3c2410_dma_chan s3c2410_chans[];
-
-/* note, we don't really use dma_device_t at the moment */
 typedef unsigned long dma_device_t;
 
 #endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index de9383814e5..d4fc89fc5f4 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -150,6 +150,13 @@ config S3C_GPIO_CFG_S3C64XX
 	  Internal configuration to enable S3C64XX style GPIO configuration
 	  functions.
 
+# DMA
+
+config S3C_DMA
+	bool
+	help
+	  Internal configuration for S3C DMA core
+
 # device definitions to compile in
 
 config S3C_DEV_HSMMC
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 8d7815d25a5..e8b23fc8fba 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -18,6 +18,10 @@ obj-y				+= pwm-clock.o
 obj-y				+= gpio.o
 obj-y				+= gpio-config.o
 
+# DMA support
+
+obj-$(CONFIG_S3C_DMA)		+= dma.o
+
 # PM support
 
 obj-$(CONFIG_PM)		+= pm.o
diff --git a/arch/arm/plat-s3c/dma.c b/arch/arm/plat-s3c/dma.c
new file mode 100644
index 00000000000..c9db75c06af
--- /dev/null
+++ b/arch/arm/plat-s3c/dma.c
@@ -0,0 +1,86 @@
+/* linux/arch/arm/plat-s3c/dma.c
+ *
+ * Copyright (c) 2003-2005,2006,2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C DMA core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct s3c2410_dma_buf;
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+#include <plat/dma-plat.h>
+
+/* dma channel state information */
+struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
+struct s3c2410_dma_chan *s3c_dma_chan_map[DMACH_MAX];
+
+/* s3c_dma_lookup_channel
+ *
+ * change the dma channel number given into a real dma channel id
+*/
+
+struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel)
+{
+	if (channel & DMACH_LOW_LEVEL)
+		return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
+	else
+		return s3c_dma_chan_map[channel];
+}
+
+/* do we need to protect the settings of the fields from
+ * irq?
+*/
+
+int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
+
+	chan->op_fn = rtn;
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_set_opfn);
+
+int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
+
+	chan->callback_fn = rtn;
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
+
+int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	chan->flags = flags;
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_setflags);
diff --git a/arch/arm/plat-s3c/include/plat/dma-core.h b/arch/arm/plat-s3c/include/plat/dma-core.h
new file mode 100644
index 00000000000..32ff2a92cb3
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/dma-core.h
@@ -0,0 +1,22 @@
+/* arch/arm/plat-s3c/include/plat/dma.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Samsung S3C DMA core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel);
+
+extern struct s3c2410_dma_chan *s3c_dma_chan_map[];
+
+/* the currently allocated channel information */
+extern struct s3c2410_dma_chan s3c2410_chans[];
+
+
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 2c8a2f5d75f..5b0bc914f58 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -71,6 +71,7 @@ config PM_SIMTEC
 config S3C2410_DMA
 	bool "S3C2410 DMA support"
 	depends on ARCH_S3C2410
+	select S3C_DMA
 	help
 	  S3C2410 DMA support. This is needed for drivers like sound which
 	  use the S3C2410's DMA system to move data to and from the
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 7c37c9a7532..b07fec01ab4 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -44,8 +44,6 @@ static int dma_channels;
 
 static struct s3c24xx_dma_selection dma_sel;
 
-/* dma channel state information */
-struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
 
 /* debugging functions */
 
@@ -135,21 +133,6 @@ dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
 #define dbg_showchan(chan) do { } while(0)
 #endif /* CONFIG_S3C2410_DMA_DEBUG */
 
-static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX];
-
-/* lookup_dma_channel
- *
- * change the dma channel number given into a real dma channel id
-*/
-
-static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel)
-{
-	if (channel & DMACH_LOW_LEVEL)
-		return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
-	else
-		return dma_chan_map[channel];
-}
-
 /* s3c2410_dma_stats_timeout
  *
  * Update DMA stats from timeout info
@@ -214,8 +197,6 @@ s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line)
 	return 0;
 }
 
-
-
 /* s3c2410_dma_loadbuffer
  *
  * load a buffer, and update the channel state
@@ -453,7 +434,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
 int s3c2410_dma_enqueue(unsigned int channel, void *id,
 			dma_addr_t data, int size)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 	struct s3c2410_dma_buf *buf;
 	unsigned long flags;
 
@@ -804,7 +785,7 @@ EXPORT_SYMBOL(s3c2410_dma_request);
 
 int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 	unsigned long flags;
 
 	if (chan == NULL)
@@ -836,7 +817,7 @@ int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
 	chan->irq_claimed = 0;
 
 	if (!(channel & DMACH_LOW_LEVEL))
-		dma_chan_map[channel] = NULL;
+		s3c_dma_chan_map[channel] = NULL;
 
 	local_irq_restore(flags);
 
@@ -995,7 +976,7 @@ static int s3c2410_dma_started(struct s3c2410_dma_chan *chan)
 int
 s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 
 	if (chan == NULL)
 		return -EINVAL;
@@ -1043,7 +1024,7 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl);
 int s3c2410_dma_config(unsigned int channel,
 		       int xferunit)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 	unsigned int dcon;
 
 	pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
@@ -1112,58 +1093,6 @@ int s3c2410_dma_config(unsigned int channel,
 
 EXPORT_SYMBOL(s3c2410_dma_config);
 
-int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, flags=%08x\n", __func__, chan, flags);
-
-	chan->flags = flags;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_setflags);
-
-
-/* do we need to protect the settings of the fields from
- * irq?
-*/
-
-int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
-
-	chan->op_fn = rtn;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_set_opfn);
-
-int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
-
-	chan->callback_fn = rtn;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
 
 /* s3c2410_dma_devconfig
  *
@@ -1179,7 +1108,7 @@ int s3c2410_dma_devconfig(int channel,
 			  enum s3c2410_dmasrc source,
 			  unsigned long devaddr)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 	unsigned int hwcfg;
 
 	if (chan == NULL)
@@ -1250,7 +1179,7 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig);
 
 int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *dst)
 {
- 	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 
 	if (chan == NULL)
 		return -EINVAL;
@@ -1508,7 +1437,7 @@ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
 	dmach = &s3c2410_chans[ch];
 	dmach->map = ch_map;
 	dmach->req_ch = channel;
-	dma_chan_map[channel] = dmach;
+	s3c_dma_chan_map[channel] = dmach;
 
 	/* select the channel */
 
diff --git a/arch/arm/plat-s3c24xx/include/plat/dma-plat.h b/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
index fbe84afe2d9..9565ead1bc9 100644
--- a/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
+++ b/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
@@ -10,8 +10,10 @@
  * published by the Free Software Foundation.
 */
 
+#include <plat/dma-core.h>
+
 extern struct sysdev_class dma_sysclass;
-extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
+extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
 
 #define DMA_CH_VALID		(1<<31)
 #define DMA_CH_NEVER		(1<<30)
@@ -31,8 +33,8 @@ struct s3c24xx_dma_map {
 	const char		*name;
 	struct s3c24xx_dma_addr  hw_addr;
 
-	unsigned long		 channels[S3C2410_DMA_CHANNELS];
-	unsigned long		 channels_rx[S3C2410_DMA_CHANNELS];
+	unsigned long		 channels[S3C_DMA_CHANNELS];
+	unsigned long		 channels_rx[S3C_DMA_CHANNELS];
 };
 
 struct s3c24xx_dma_selection {
@@ -58,7 +60,7 @@ extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
 */
 
 struct s3c24xx_dma_order_ch {
-	unsigned int	list[S3C2410_DMA_CHANNELS];	/* list of channels */
+	unsigned int	list[S3C_DMA_CHANNELS];	/* list of channels */
 	unsigned int	flags;				/* flags */
 };
 
-- 
cgit v1.2.3


From e3980b6a03e4c81e0e8d2cfcd7ab18082bbe92a5 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 15 Apr 2009 17:11:53 +0100
Subject: [ARM] SMDK6410: Hook regulator control of VDDARM up for WM1190-EV1

This allows the S3C CPUfreq driver to do DVFS.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6410/mach-smdk6410.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 697c0461f2b..d26f693010e 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -226,13 +226,22 @@ static struct regulator_init_data wm8350_dcdc4_data = {
 };
 
 /* ARM core */
+static struct regulator_consumer_supply dcdc6_consumers[] = {
+	{
+		.supply = "vddarm",
+	}
+};
+
 static struct regulator_init_data wm8350_dcdc6_data = {
 	.constraints = {
 		.name = "PVDD_ARM",
 		.min_uV = 1000000,
 		.max_uV = 1300000,
 		.always_on = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
 	},
+	.num_consumer_supplies = ARRAY_SIZE(dcdc6_consumers),
+	.consumer_supplies = dcdc6_consumers,
 };
 
 /* Alive */
-- 
cgit v1.2.3


From eca8655ffa1ffb23c8f6f1485c1315a3087c8f38 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Fri, 6 Mar 2009 19:49:48 +0000
Subject: [ARM] S3C: Add common USB OHCI device definition

Add common definition for USB OHCI platform device, add a Kconfig
to selectively compile it and add update all the users.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/Kconfig |  8 +++++++
 arch/arm/mach-s3c2412/Kconfig |  3 +++
 arch/arm/mach-s3c2440/Kconfig |  5 +++++
 arch/arm/plat-s3c/Kconfig     |  5 +++++
 arch/arm/plat-s3c/Makefile    |  1 +
 arch/arm/plat-s3c/dev-usb.c   | 50 +++++++++++++++++++++++++++++++++++++++++++
 arch/arm/plat-s3c24xx/devs.c  | 30 --------------------------
 7 files changed, 72 insertions(+), 30 deletions(-)
 create mode 100644 arch/arm/plat-s3c/dev-usb.c

diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 63a30d1dd42..41bb65d5b91 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -59,6 +59,7 @@ config ARCH_H1940
 	bool "IPAQ H1940"
 	select CPU_S3C2410
 	select PM_H1940 if PM
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the HP IPAQ H1940
 
@@ -70,6 +71,7 @@ config PM_H1940
 config MACH_N30
 	bool "Acer N30 family"
 	select CPU_S3C2410
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you want suppt for the Acer N30, Acer N35,
 	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
@@ -82,6 +84,7 @@ config ARCH_BAST
 	select MACH_BAST_IDE
 	select S3C24XX_DCLK
 	select ISA
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec Electronics EB2410ITX
 	  development board (also known as BAST)
@@ -89,6 +92,7 @@ config ARCH_BAST
 config MACH_OTOM
  	bool "NexVision OTOM Board"
  	select CPU_S3C2410
+	select S3C_DEV_USB_HOST
 	help
  	  Say Y here if you are using the Nex Vision OTOM board
 
@@ -96,6 +100,7 @@ config MACH_AML_M5900
 	bool "AML M5900 Series"
 	select CPU_S3C2410
 	select PM_SIMTEC if PM
+	select S3C_DEV_USB_HOST
 	help
 	   Say Y here if you are using the American Microsystems M5900 Series
            <http://www.amltd.com>
@@ -111,6 +116,7 @@ config BAST_PC104_IRQ
 config MACH_TCT_HAMMER
 	bool "TCT Hammer Board"
 	select CPU_S3C2410
+	select S3C_DEV_USB_HOST
 	help
 	   Say Y here if you are using the TinCanTools Hammer Board
            <http://www.tincantools.com>
@@ -122,12 +128,14 @@ config MACH_VR1000
 	select SIMTEC_NOR
 	select MACH_BAST_IDE
 	select CPU_S3C2410
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Thorcom VR1000 board.
 
 config MACH_QT2410
 	bool "QT2410"
 	select CPU_S3C2410
+	select S3C_DEV_USB_HOST
 	help
 	   Say Y here if you are using the Armzone QT2410
 
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index ca99564ae4b..63586ffd0ae 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -38,6 +38,7 @@ menu "S3C2412 Machines"
 config MACH_JIVE
 	bool "Logitech Jive"
 	select CPU_S3C2412
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Logitech Jive.
 
@@ -50,6 +51,7 @@ config MACH_SMDK2413
 	select CPU_S3C2412
 	select MACH_S3C2413
 	select MACH_SMDK
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using an SMDK2413
 
@@ -72,6 +74,7 @@ config MACH_SMDK2412
 config MACH_VSTMS
 	bool "VMSTMS"
 	select CPU_S3C2412
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using an VSTMS board
 
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index cde5ae9a434..5df73cbf2b4 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -33,6 +33,7 @@ config MACH_ANUBIS
 	select PM_SIMTEC if PM
 	select HAVE_PATA_PLATFORM
 	select S3C24XX_GPIO_EXTRA64
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec Electronics ANUBIS
 	  development system
@@ -43,6 +44,7 @@ config MACH_OSIRIS
 	select S3C24XX_DCLK
 	select PM_SIMTEC if PM
 	select S3C24XX_GPIO_EXTRA128
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec IM2440D20 module, also
 	  known as the Osiris.
@@ -58,12 +60,14 @@ config ARCH_S3C2440
 	bool "SMDK2440"
 	select CPU_S3C2440
 	select MACH_SMDK
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the SMDK2440.
 
 config MACH_NEXCODER_2440
  	bool "NexVision NEXCODER 2440 Light Board"
  	select CPU_S3C2440
+	select S3C_DEV_USB_HOST
 	help
  	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
 
@@ -76,6 +80,7 @@ config SMDK2440_CPU2440
 config MACH_AT2440EVB
 	bool "Avantech AT2440EVB development board"
 	select CPU_S3C2440
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the AT2440EVB development board
 
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index de9383814e5..042d34a6f81 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -172,4 +172,9 @@ config S3C_DEV_FB
 	help
 	  Compile in platform device definition for framebuffer
 
+config S3C_DEV_USB_HOST
+	bool
+	help
+	  Compile in platform device definition for USB host.
+
 endif
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 8d7815d25a5..aa995a49e56 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -30,3 +30,4 @@ obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
 obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
+obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
diff --git a/arch/arm/plat-s3c/dev-usb.c b/arch/arm/plat-s3c/dev-usb.c
new file mode 100644
index 00000000000..a997d952816
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-usb.c
@@ -0,0 +1,50 @@
+/* linux/arch/arm/plat-s3c/dev-usb.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for USB host
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+
+static struct resource s3c_usb_resource[] = {
+	[0] = {
+		.start = S3C24XX_PA_USBHOST,
+		.end   = S3C24XX_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBH,
+		.end   = IRQ_USBH,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 s3c_device_usb_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_usb = {
+	.name		  = "s3c2410-ohci",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_usb_resource),
+	.resource	  = s3c_usb_resource,
+	.dev              = {
+		.dma_mask = &s3c_device_usb_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+EXPORT_SYMBOL(s3c_device_usb);
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 16ac01d9b8a..4eb378c89a3 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -136,36 +136,6 @@ struct platform_device *s3c24xx_uart_src[4] = {
 struct platform_device *s3c24xx_uart_devs[4] = {
 };
 
-/* USB Host Controller */
-
-static struct resource s3c_usb_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_USBHOST,
-		.end   = S3C24XX_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBH,
-		.end   = IRQ_USBH,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 s3c_device_usb_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_usb = {
-	.name		  = "s3c2410-ohci",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_usb_resource),
-	.resource	  = s3c_usb_resource,
-	.dev              = {
-		.dma_mask = &s3c_device_usb_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-
-EXPORT_SYMBOL(s3c_device_usb);
-
 /* LCD Controller */
 
 static struct resource s3c_lcd_resource[] = {
-- 
cgit v1.2.3


From 98fd63ba61450151a3b6d18a8264156996d86411 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Fri, 6 Mar 2009 19:49:49 +0000
Subject: [ARM] SMDK6410: Add USB OHCI host

Add USB OHCI host capability to the SMDK6410 for either USB OtG or
a single/double USB host port.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6410/Kconfig         | 1 +
 arch/arm/mach-s3c6410/mach-smdk6410.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index 1d501007002..0c8df9797e5 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -26,6 +26,7 @@ config MACH_SMDK6410
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_I2C1
 	select S3C_DEV_FB
+	select S3C_DEV_USB_HOST
 	select S3C6410_SETUP_SDHCI
 	select S3C64XX_SETUP_I2C1
 	select S3C64XX_SETUP_FB_24BPP
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 7f473e47e4f..678b728fee1 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -141,6 +141,7 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 	&s3c_device_i2c0,
 	&s3c_device_i2c1,
 	&s3c_device_fb,
+	&s3c_device_usb,
 	&smdk6410_lcd_powerdev,
 };
 
-- 
cgit v1.2.3


From e6a2a9ce69400a8109e01030aec0d5e1e2bc73c2 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Fri, 6 Mar 2009 19:51:50 +0000
Subject: [ARM] S3C: Rename S3C24XX_PA_USBHOST to S3C_PA_USBHOST

The USB host base address is available on both the S3C24XX and S3C64XX
ranges.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/map.h | 2 +-
 arch/arm/plat-s3c/dev-usb.c              | 4 ++--
 arch/arm/plat-s3c24xx/include/plat/map.h | 1 -
 3 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index 255fdfeaf95..e99b212cb1c 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -84,7 +84,6 @@
 
 #define S3C24XX_PA_IRQ      S3C2410_PA_IRQ
 #define S3C24XX_PA_MEMCTRL  S3C2410_PA_MEMCTRL
-#define S3C24XX_PA_USBHOST  S3C2410_PA_USBHOST
 #define S3C24XX_PA_DMA      S3C2410_PA_DMA
 #define S3C24XX_PA_CLKPWR   S3C2410_PA_CLKPWR
 #define S3C24XX_PA_LCD      S3C2410_PA_LCD
@@ -102,6 +101,7 @@
 
 #define S3C_PA_IIC          S3C2410_PA_IIC
 #define S3C_PA_UART	    S3C24XX_PA_UART
+#define S3C_PA_USBHOST	S3C2410_PA_USBHOST
 #define S3C_PA_HSMMC0	    S3C2443_PA_HSMMC
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/plat-s3c/dev-usb.c b/arch/arm/plat-s3c/dev-usb.c
index a997d952816..2ee85abed6d 100644
--- a/arch/arm/plat-s3c/dev-usb.c
+++ b/arch/arm/plat-s3c/dev-usb.c
@@ -23,8 +23,8 @@
 
 static struct resource s3c_usb_resource[] = {
 	[0] = {
-		.start = S3C24XX_PA_USBHOST,
-		.end   = S3C24XX_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
+		.start = S3C_PA_USBHOST,
+		.end   = S3C_PA_USBHOST + 0x100 - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h
index eed8f78e759..c4d133436fc 100644
--- a/arch/arm/plat-s3c24xx/include/plat/map.h
+++ b/arch/arm/plat-s3c24xx/include/plat/map.h
@@ -58,7 +58,6 @@
 #define S3C24XX_SZ_SPI		SZ_1M
 #define S3C24XX_SZ_SDI		SZ_1M
 #define S3C24XX_SZ_NAND		SZ_1M
-#define S3C24XX_SZ_USBHOST	SZ_1M
 
 /* GPIO ports */
 
-- 
cgit v1.2.3


From 67b3e542ab1cf9f2fe3c1d4ae2aa16dd3b4a7e24 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Fri, 6 Mar 2009 19:51:51 +0000
Subject: [ARM] S3C64XX: Add USB OHCI support

Add USB OHCI host definitions.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6400/include/mach/map.h | 3 +++
 arch/arm/plat-s3c64xx/Kconfig            | 1 +
 2 files changed, 4 insertions(+)

diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index baf1c0f1ea5..ea4223b5509 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -55,6 +55,8 @@
 #define S3C64XX_PA_MODEM	(0x74108000)
 #define S3C64XX_VA_MODEM	S3C_ADDR(0x00600000)
 
+#define S3C64XX_PA_USBHOST	(0x74300000)
+
 /* place VICs close together */
 #define S3C_VA_VIC0		(S3C_VA_IRQ + 0x00)
 #define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
@@ -67,5 +69,6 @@
 #define S3C_PA_IIC		S3C64XX_PA_IIC0
 #define S3C_PA_IIC1		S3C64XX_PA_IIC1
 #define S3C_PA_FB		S3C64XX_PA_FB
+#define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
 
 #endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
index 54375a00a7d..ad48fd73e04 100644
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -19,6 +19,7 @@ config PLAT_S3C64XX
 	select S3C_GPIO_PULL_UPDOWN
 	select S3C_GPIO_CFG_S3C24XX
 	select S3C_GPIO_CFG_S3C64XX
+	select USB_ARCH_HAS_OHCI
 	help
 	  Base platform code for any Samsung S3C64XX device
 
-- 
cgit v1.2.3


From 57699e9adf1b44f281d808609b47816804763bfa Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:23 +0000
Subject: [ARM] S3C: Add debug to UART save and a per-arch callback pre-restore

Add a simple debug message on saving the UART state and add a per-arch
pre-restore function to be used by the s3c64xx restore code to ensure
the UARTs control registers do not go through any illegal state changes.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/pm.c                       | 5 +++++
 arch/arm/plat-s3c24xx/include/plat/pm-core.h | 5 +++++
 2 files changed, 10 insertions(+)

diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
index 061182ca66e..de4c4aa2246 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-s3c/pm.c
@@ -83,6 +83,9 @@ static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
 	save->ufcon = __raw_readl(regs + S3C2410_UFCON);
 	save->umcon = __raw_readl(regs + S3C2410_UMCON);
 	save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
+
+	S3C_PMDBG("UART[%d]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
+		  uart, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
 }
 
 static void s3c_pm_save_uarts(void)
@@ -98,6 +101,8 @@ static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
 {
 	void __iomem *regs = S3C_VA_UARTx(uart);
 
+	s3c_pm_arch_update_uart(regs, save);
+
 	__raw_writel(save->ulcon, regs + S3C2410_ULCON);
 	__raw_writel(save->ucon,  regs + S3C2410_UCON);
 	__raw_writel(save->ufcon, regs + S3C2410_UFCON);
diff --git a/arch/arm/plat-s3c24xx/include/plat/pm-core.h b/arch/arm/plat-s3c24xx/include/plat/pm-core.h
index c75882113e0..fb45dd9adca 100644
--- a/arch/arm/plat-s3c24xx/include/plat/pm-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/pm-core.h
@@ -57,3 +57,8 @@ static inline void s3c_pm_arch_show_resume_irqs(void)
 	s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
 				s3c_irqwake_eintmask);
 }
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+					   struct pm_uart_save *save)
+{
+}
-- 
cgit v1.2.3


From 4b637dc231a96a151ea70c27d86b35c7891e2a7c Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:24 +0000
Subject: [ARM] S3C: PM save UART UDIVSLOT if doing PM

Add the facility to save the UART UDIVSLOT register if the UART
state is being saved over suspend.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/pm.h | 3 +++
 arch/arm/plat-s3c/pm.c              | 8 ++++++++
 2 files changed, 11 insertions(+)

diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h
index 3779775133a..5f8707e2a09 100644
--- a/arch/arm/plat-s3c/include/plat/pm.h
+++ b/arch/arm/plat-s3c/include/plat/pm.h
@@ -44,6 +44,8 @@ extern void (*pm_cpu_sleep)(void);
 
 extern unsigned long s3c_pm_flags;
 
+extern unsigned char pm_uart_udivslot;  /* true to save UART UDIVSLOT */
+
 /* from sleep.S */
 
 extern int  s3c_cpu_save(unsigned long *saveblk);
@@ -88,6 +90,7 @@ struct pm_uart_save {
 	u32	ufcon;
 	u32	umcon;
 	u32	ubrdiv;
+	u32	udivslot;
 };
 
 /* helper functions to save/restore lists of registers. */
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
index de4c4aa2246..9957b539600 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-s3c/pm.c
@@ -70,6 +70,8 @@ static inline void s3c_pm_debug_init(void)
 
 /* Save the UART configurations if we are configured for debug. */
 
+unsigned char pm_uart_udivslot;
+
 #ifdef CONFIG_S3C2410_PM_DEBUG
 
 struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
@@ -84,6 +86,9 @@ static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
 	save->umcon = __raw_readl(regs + S3C2410_UMCON);
 	save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
 
+	if (pm_uart_udivslot)
+		save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
+
 	S3C_PMDBG("UART[%d]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
 		  uart, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
 }
@@ -108,6 +113,9 @@ static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
 	__raw_writel(save->ufcon, regs + S3C2410_UFCON);
 	__raw_writel(save->umcon, regs + S3C2410_UMCON);
 	__raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
+
+	if (pm_uart_udivslot)
+		__raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
 }
 
 static void s3c_pm_restore_uarts(void)
-- 
cgit v1.2.3


From bd117bd161ea99826494983aef8c8e236ac129bd Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 10 Mar 2009 18:19:35 +0000
Subject: [ARM] S3C64XX: Initial support for PM (suspend to RAM)

Add the initial support for the S3C64XX based systems to use
suspend-to-RAM to sleep.

Includes basic debugging for use with the SMDK6410 usign the
LEDs on the baseboard.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6400/include/mach/regs-clock.h |  16 ++
 arch/arm/plat-s3c/Kconfig                       |   9 ++
 arch/arm/plat-s3c/include/plat/pm.h             |  12 ++
 arch/arm/plat-s3c/pm.c                          |   6 +-
 arch/arm/plat-s3c64xx/Makefile                  |   5 +
 arch/arm/plat-s3c64xx/include/plat/irqs.h       |   1 +
 arch/arm/plat-s3c64xx/include/plat/pm-core.h    |  98 +++++++++++++
 arch/arm/plat-s3c64xx/include/plat/regs-clock.h |   1 +
 arch/arm/plat-s3c64xx/irq-eint.c                |   3 +
 arch/arm/plat-s3c64xx/pm.c                      | 186 ++++++++++++++++++++++++
 arch/arm/plat-s3c64xx/sleep.S                   | 144 ++++++++++++++++++
 11 files changed, 479 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-s3c6400/include/mach/regs-clock.h
 create mode 100644 arch/arm/plat-s3c64xx/include/plat/pm-core.h
 create mode 100644 arch/arm/plat-s3c64xx/pm.c
 create mode 100644 arch/arm/plat-s3c64xx/sleep.S

diff --git a/arch/arm/mach-s3c6400/include/mach/regs-clock.h b/arch/arm/mach-s3c6400/include/mach/regs-clock.h
new file mode 100644
index 00000000000..a6c7f4eb3a1
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/regs-clock.h
@@ -0,0 +1,16 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/regs-clock.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - clock register compatibility with s3c24xx
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/regs-clock.h>
+
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index 042d34a6f81..a4c5027421d 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -71,6 +71,15 @@ config S3C2410_PM_DEBUG
 	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
 	  for more information.
 
+config S3C_PM_DEBUG_LED_SMDK
+       bool "SMDK LED suspend/resume debugging"
+       depends on PM && (MACH_SMDK6410)
+       help
+         Say Y here to enable the use of the SMDK LEDs on the baseboard
+	 for debugging of the state of the suspend and resume process.
+
+	 Note, this currently only works for S3C64XX based SMDK boards.
+
 config S3C2410_PM_CHECK
 	bool "S3C2410 PM Suspend Memory CRC"
 	depends on PM && CRC32
diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h
index 5f8707e2a09..7a797192fcf 100644
--- a/arch/arm/plat-s3c/include/plat/pm.h
+++ b/arch/arm/plat-s3c/include/plat/pm.h
@@ -127,6 +127,18 @@ extern void s3c_pm_dbg(const char *msg, ...);
 #define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt)
 #endif
 
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+/**
+ * s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs
+ * @set: set bits for the state of the LEDs
+ * @clear: clear bits for the state of the LEDs.
+ */
+extern void s3c_pm_debug_smdkled(u32 set, u32 clear);
+
+#else
+static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { }
+#endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */
+
 /* suspend memory checking */
 
 #ifdef CONFIG_S3C2410_PM_CHECK
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
index 9957b539600..8d97db2c7a0 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-s3c/pm.c
@@ -21,11 +21,10 @@
 
 #include <asm/cacheflush.h>
 #include <mach/hardware.h>
+#include <mach/map.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-irq.h>
 #include <asm/irq.h>
 
@@ -326,6 +325,9 @@ static int s3c_pm_enter(suspend_state_t state)
 
 	S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
 
+	/* LEDs should now be 1110 */
+	s3c_pm_debug_smdkled(1 << 1, 0);
+
 	s3c_pm_check_restore();
 
 	/* ok, let's return from sleep */
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
index 2e6d79bf8f3..b2bc2a9ed46 100644
--- a/arch/arm/plat-s3c64xx/Makefile
+++ b/arch/arm/plat-s3c64xx/Makefile
@@ -24,6 +24,11 @@ obj-y				+= gpiolib.o
 obj-$(CONFIG_CPU_S3C6400_INIT)	+= s3c6400-init.o
 obj-$(CONFIG_CPU_S3C6400_CLOCK)	+= s3c6400-clock.o
 
+# PM support
+
+obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM)		+= sleep.o
+
 # Device setup
 
 obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h
index f865bf4d709..743a70094d0 100644
--- a/arch/arm/plat-s3c64xx/include/plat/irqs.h
+++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h
@@ -157,6 +157,7 @@
 
 #define S3C_EINT(x)		((x) + S3C_IRQ_EINT_BASE)
 #define IRQ_EINT(x)		S3C_EINT(x)
+#define IRQ_EINT_BIT(x)		((x) - S3C_EINT(0))
 
 /* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
  * that they are sourced from the GPIO pins but with a different scheme for
diff --git a/arch/arm/plat-s3c64xx/include/plat/pm-core.h b/arch/arm/plat-s3c64xx/include/plat/pm-core.h
new file mode 100644
index 00000000000..d347de3ba0d
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/pm-core.h
@@ -0,0 +1,98 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/pm-core.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <plat/regs-gpio.h>
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+	u32 tmp = __raw_readl(S3C_PCLK_GATE);
+
+	/* As a note, since the S3C64XX UARTs generally have multiple
+	 * clock sources, we simply enable PCLK at the moment and hope
+	 * that the resume settings for the UART are suitable for the
+	 * use with PCLK.
+	 */
+
+	tmp |= S3C_CLKCON_PCLK_UART0;
+	tmp |= S3C_CLKCON_PCLK_UART1;
+	tmp |= S3C_CLKCON_PCLK_UART2;
+	tmp |= S3C_CLKCON_PCLK_UART3;
+
+	__raw_writel(tmp, S3C_PCLK_GATE);
+	udelay(10);
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+	/* VIC should have already been taken care of */
+
+	/* clear any pending EINT0 interrupts */
+	__raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND);
+}
+
+static inline void s3c_pm_arch_stop_clocks(void)
+{
+}
+
+static inline void s3c_pm_arch_show_resume_irqs(void)
+{
+}
+
+/* make these defines, we currently do not have any need to change
+ * the IRQ wake controls depending on the CPU we are running on */
+
+#define s3c_irqwake_eintallow	((1 << 28) - 1)
+#define s3c_irqwake_intallow	(0)
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+					   struct pm_uart_save *save)
+{
+	u32 ucon = __raw_readl(regs + S3C2410_UCON);
+	u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
+	u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
+	u32 new_ucon;
+	u32 delta;
+
+	/* S3C64XX UART blocks only support level interrupts, so ensure that
+	 * when we restore unused UART blocks we force the level interrupt
+	 * settigs. */
+	save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
+
+	/* We have a constraint on changing the clock type of the UART
+	 * between UCLKx and PCLK, so ensure that when we restore UCON
+	 * that the CLK field is correctly modified if the bootloader
+	 * has changed anything.
+	 */
+	if (ucon_clk != save_clk) {
+		new_ucon = save->ucon;
+		delta = ucon_clk ^ save_clk;
+
+		/* change from UCLKx => wrong PCLK,
+		 * either UCLK can be tested for by a bit-test
+		 * with UCLK0 */
+		if (ucon_clk & S3C6400_UCON_UCLK0 &&
+		    !(save_clk & S3C6400_UCON_UCLK0) &&
+		    delta & S3C6400_UCON_PCLK2) {
+			new_ucon &= ~S3C6400_UCON_UCLK0;
+		} else if (delta == S3C6400_UCON_PCLK2) {
+			/* as an precaution, don't change from
+			 * PCLK2 => PCLK or vice-versa */
+			new_ucon ^= S3C6400_UCON_PCLK2;
+		}
+
+		S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
+			  ucon, new_ucon, save->ucon);
+		save->ucon = new_ucon;
+	}
+}
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
index b1082c16324..52836d41e33 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
+++ b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
@@ -32,6 +32,7 @@
 #define S3C_HCLK_GATE		S3C_CLKREG(0x30)
 #define S3C_PCLK_GATE		S3C_CLKREG(0x34)
 #define S3C_SCLK_GATE		S3C_CLKREG(0x38)
+#define S3C_MEM0_GATE		S3C_CLKREG(0x3C)
 
 /* CLKDIV0 */
 #define S3C6400_CLKDIV0_MFC_MASK	(0xf << 28)
diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c
index 47e5155bb13..f81b7b818ba 100644
--- a/arch/arm/plat-s3c64xx/irq-eint.c
+++ b/arch/arm/plat-s3c64xx/irq-eint.c
@@ -14,6 +14,7 @@
 
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/sysdev.h>
 #include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/io.h>
@@ -26,6 +27,7 @@
 
 #include <mach/map.h>
 #include <plat/cpu.h>
+#include <plat/pm.h>
 
 #define eint_offset(irq)	((irq) - IRQ_EINT(0))
 #define eint_irq_to_bit(irq)	(1 << eint_offset(irq))
@@ -134,6 +136,7 @@ static struct irq_chip s3c_irq_eint = {
 	.mask_ack	= s3c_irq_eint_maskack,
 	.ack		= s3c_irq_eint_ack,
 	.set_type	= s3c_irq_eint_set_type,
+	.set_wake	= s3c_irqext_wake,
 };
 
 /* s3c_irq_demux_eint
diff --git a/arch/arm/plat-s3c64xx/pm.c b/arch/arm/plat-s3c64xx/pm.c
new file mode 100644
index 00000000000..98190aa364a
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/pm.c
@@ -0,0 +1,186 @@
+/* linux/arch/arm/plat-s3c64xx/pm.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX CPU PM support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/pm.h>
+#include <plat/regs-sys.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-clock.h>
+#include <plat/regs-syscon-power.h>
+#include <plat/regs-gpio-memport.h>
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+#include <plat/gpio-bank-n.h>
+
+void s3c_pm_debug_smdkled(u32 set, u32 clear)
+{
+	unsigned long flags;
+	u32 reg;
+
+	local_irq_save(flags);
+	reg = __raw_readl(S3C64XX_GPNCON);
+	reg &= ~(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) |
+		 S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15));
+	reg |= S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) |
+	       S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15);
+	__raw_writel(reg, S3C64XX_GPNCON);
+
+	reg = __raw_readl(S3C64XX_GPNDAT);
+	reg &= ~(clear << 12);
+	reg |= set << 12;
+	__raw_writel(reg, S3C64XX_GPNDAT);
+
+	local_irq_restore(flags);
+}
+#endif
+
+static struct sleep_save core_save[] = {
+	SAVE_ITEM(S3C_APLL_LOCK),
+	SAVE_ITEM(S3C_MPLL_LOCK),
+	SAVE_ITEM(S3C_EPLL_LOCK),
+	SAVE_ITEM(S3C_CLK_SRC),
+	SAVE_ITEM(S3C_CLK_DIV0),
+	SAVE_ITEM(S3C_CLK_DIV1),
+	SAVE_ITEM(S3C_CLK_DIV2),
+	SAVE_ITEM(S3C_CLK_OUT),
+	SAVE_ITEM(S3C_HCLK_GATE),
+	SAVE_ITEM(S3C_PCLK_GATE),
+	SAVE_ITEM(S3C_SCLK_GATE),
+	SAVE_ITEM(S3C_MEM0_GATE),
+
+	SAVE_ITEM(S3C_EPLL_CON1),
+	SAVE_ITEM(S3C_EPLL_CON0),
+
+	SAVE_ITEM(S3C64XX_MEM0DRVCON),
+	SAVE_ITEM(S3C64XX_MEM1DRVCON),
+
+#ifndef CONFIG_CPU_FREQ
+	SAVE_ITEM(S3C_APLL_CON),
+	SAVE_ITEM(S3C_MPLL_CON),
+#endif
+};
+
+static struct sleep_save misc_save[] = {
+	SAVE_ITEM(S3C64XX_AHB_CON0),
+	SAVE_ITEM(S3C64XX_AHB_CON1),
+	SAVE_ITEM(S3C64XX_AHB_CON2),
+	
+	SAVE_ITEM(S3C64XX_SPCON),
+
+	SAVE_ITEM(S3C64XX_MEM0CONSTOP),
+	SAVE_ITEM(S3C64XX_MEM1CONSTOP),
+	SAVE_ITEM(S3C64XX_MEM0CONSLP0),
+	SAVE_ITEM(S3C64XX_MEM0CONSLP1),
+	SAVE_ITEM(S3C64XX_MEM1CONSLP),
+};
+
+void s3c_pm_configure_extint(void)
+{
+	__raw_writel(s3c_irqwake_eintmask, S3C64XX_EINT_MASK);
+}
+
+void s3c_pm_save_gpios(void)
+{
+	/* currently, unless the bootloader does something really stupid
+	 * the gpio blocks should be maintained over their sleep.
+	 */
+}
+
+void s3c_pm_restore_gpios(void)
+{
+}
+
+void s3c_pm_restore_core(void)
+{
+	__raw_writel(0, S3C64XX_EINT_MASK);
+
+	s3c_pm_debug_smdkled(1 << 2, 0);
+
+	s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
+	s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
+}
+
+void s3c_pm_save_core(void)
+{
+	s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
+	s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
+}
+
+/* since both s3c6400 and s3c6410 share the same sleep pm calls, we
+ * put the per-cpu code in here until any new cpu comes along and changes
+ * this.
+ */
+
+#include <plat/regs-gpio.h>
+
+static void s3c64xx_cpu_suspend(void)
+{
+	unsigned long tmp;
+
+	/* set our standby method to sleep */
+
+	tmp = __raw_readl(S3C64XX_PWR_CFG);
+	tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
+	tmp |= S3C64XX_PWRCFG_CFG_WFI_SLEEP;
+	__raw_writel(tmp, S3C64XX_PWR_CFG);
+
+	/* clear any old wakeup */
+
+	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT),
+		     S3C64XX_WAKEUP_STAT);
+
+	/* set the LED state to 0110 over sleep */
+	s3c_pm_debug_smdkled(3 << 1, 0xf);
+
+	/* issue the standby signal into the pm unit. Note, we
+	 * issue a write-buffer drain just in case */
+
+	tmp = 0;
+
+	asm("b 1f\n\t"
+	    ".align 5\n\t"
+	    "1:\n\t"
+	    "mcr p15, 0, %0, c7, c10, 5\n\t"
+	    "mcr p15, 0, %0, c7, c10, 4\n\t"
+	    "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
+
+	/* we should never get past here */
+
+	panic("sleep resumed to originator?");
+}
+
+static void s3c64xx_pm_prepare(void)
+{
+	/* store address of resume. */
+	__raw_writel(virt_to_phys(s3c_cpu_resume), S3C64XX_INFORM0);
+
+	/* ensure previous wakeup state is cleared before sleeping */
+	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
+}
+
+static int s3c64xx_pm_init(void)
+{
+	pm_cpu_prep = s3c64xx_pm_prepare;
+	pm_cpu_sleep = s3c64xx_cpu_suspend;
+	pm_uart_udivslot = 1;
+	return 0;
+}
+
+arch_initcall(s3c64xx_pm_init);
diff --git a/arch/arm/plat-s3c64xx/sleep.S b/arch/arm/plat-s3c64xx/sleep.S
new file mode 100644
index 00000000000..8e71fe90a37
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/sleep.S
@@ -0,0 +1,144 @@
+/* linux/0arch/arm/plat-s3c64xx/sleep.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX CPU sleep code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/map.h>
+
+#undef S3C64XX_VA_GPIO
+#define S3C64XX_VA_GPIO (0x0)
+
+#include <plat/regs-gpio.h>
+#include <plat/gpio-bank-n.h>
+
+#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
+
+	.text
+
+	/* s3c_cpu_save
+	 *
+	 * Save enough processor state to allow the restart of the pm.c
+	 * code after resume.
+	 *
+	 * entry:
+	 *	r0 = pointer to the save block
+	*/
+
+ENTRY(s3c_cpu_save)
+	stmfd	sp!, { r4 - r12, lr }
+
+	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
+	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
+	mrc	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
+	mrc	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
+	mrc	p15, 0, r8, c2, c0, 2	@ Translation Table Control
+	mrc	p15, 0, r9, c1, c0, 0	@ Control register
+	mrc	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
+	mrc	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
+
+	stmia	r0, { r4 - r13 }	@ Save CP registers and SP
+
+	@@ save our state to ram
+	bl	s3c_pm_cb_flushcache
+
+	@@ call final suspend code
+	ldr	r0, =pm_cpu_sleep
+	ldr	pc, [r0]
+	
+	@@ return to the caller, after the MMU is turned on.
+	@@ restore the last bits of the stack and return.
+resume_with_mmu:
+	ldmfd	sp!, { r4 - r12, pc }	@ return, from sp from s3c_cpu_save
+
+	.data
+
+	/* the next bit is code, but it requires easy access to the
+	 * s3c_sleep_save_phys data before the MMU is switched on, so
+	 * we store the code that needs this variable in the .data where
+	 * the value can be written to (the .text segment is RO).
+	*/
+
+	.global	s3c_sleep_save_phys
+s3c_sleep_save_phys:
+	.word	0
+
+	/* Sleep magic, the word before the resume entry point so that the
+	 * bootloader can check for a resumeable image. */
+
+	.word	0x2bedf00d
+
+	/* s3c_cpu_reusme
+	 *
+	 * This is the entry point, stored by whatever method the bootloader
+	 * requires to get the kernel runnign again. This code expects to be
+	 * entered with no caches live and the MMU disabled. It will then
+	 * restore the MMU and other basic CP registers saved and restart
+	 * the kernel C code to finish the resume code.
+	*/
+
+ENTRY(s3c_cpu_resume)
+	msr	cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
+	ldr	r2, =LL_UART		/* for debug */
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+	/* Initialise the GPIO state if we are debugging via the SMDK LEDs,
+	 * as the uboot version supplied resets these to inputs during the
+	 * resume checks.
+	*/
+
+	ldr	r3, =S3C64XX_PA_GPIO
+	ldr	r0, [ r3, #S3C64XX_GPNCON ]
+	bic	r0, r0, #(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | \
+			  S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15))
+	orr	r0, r0, #(S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | \
+			  S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15))
+	str	r0, [ r3, #S3C64XX_GPNCON ]
+
+	ldr	r0, [ r3, #S3C64XX_GPNDAT ]
+	bic	r0, r0, #0xf << 12			@ GPN12..15
+	orr	r0, r0, #1 << 15			@ GPN15
+	str	r0, [ r3, #S3C64XX_GPNDAT ]
+#endif
+
+	/* __v6_setup from arch/arm/mm/proc-v6.S, ensure that the caches
+	 * are thoroughly cleaned just in case the bootloader didn't do it
+	 * for us. */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c14, 0		@ clean+invalidate D cache
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, r0, c7, c15, 0		@ clean+invalidate cache
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	@@mcr	p15, 0, r0, c8, c7, 0		@ invalidate I + D TLBs
+	@@mcr	p15, 0, r0, c7, c7, 0		@ Invalidate I + D caches
+
+	ldr	r0, s3c_sleep_save_phys
+	ldmia	r0, { r4 - r13 }
+
+	mcr	p15, 0, r4, c13, c0, 0	@ FCSE/PID
+	mcr	p15, 0, r5, c3, c0, 0	@ Domain ID
+	mcr	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
+	mcr	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
+	mcr	p15, 0, r8, c2, c0, 2	@ Translation Table Control
+	mcr	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
+
+	mov	r0, #0			@ restore copro access controls
+	mcr	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
+	mcr 	p15, 0, r0, c7, c5, 4
+
+	ldr	r2, =resume_with_mmu
+	mcr	p15, 0, r9, c1, c0, 0		/* turn mmu back on */
+	nop
+	mov	pc, r2				/* jump back */
+
+	.end
-- 
cgit v1.2.3


From 0abfe9aab1867abd96b44a425ad27ce021891e4f Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:28 +0000
Subject: [ARM] S3C64XX: Add s3c6410_sysclass export

Add definition for s3c6410_sysclass which was missing
from arch/arm/plat-s3c/include/plat/cpu.h.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/cpu.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
index e62ae0fcfe5..f878cf6673c 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-s3c/include/plat/cpu.h
@@ -69,3 +69,4 @@ extern struct sysdev_class s3c2412_sysclass;
 extern struct sysdev_class s3c2440_sysclass;
 extern struct sysdev_class s3c2442_sysclass;
 extern struct sysdev_class s3c2443_sysclass;
+extern struct sysdev_class s3c6410_sysclass;
-- 
cgit v1.2.3


From 1deb507dc7612e6c81b7953e827d1c859c1d8c0b Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:31 +0000
Subject: [ARM] S3C64XX: Add generic s3c64xx sys device.

Add an s3c64xx_sysclass and device for items that currently
want to bind to any s3c64xx processor. The first user of this
will be parts of the s3c64xx suspend support which need to
save device state over suspend/resume.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/cpu.h |  2 ++
 arch/arm/plat-s3c64xx/cpu.c          | 19 +++++++++++++++++++
 2 files changed, 21 insertions(+)

diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
index f878cf6673c..be541cbba07 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-s3c/include/plat/cpu.h
@@ -70,3 +70,5 @@ extern struct sysdev_class s3c2440_sysclass;
 extern struct sysdev_class s3c2442_sysclass;
 extern struct sysdev_class s3c2443_sysclass;
 extern struct sysdev_class s3c6410_sysclass;
+extern struct sysdev_class s3c64xx_sysclass;
+
diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/plat-s3c64xx/cpu.c
index 91f49a3a665..f9fdaab32ab 100644
--- a/arch/arm/plat-s3c64xx/cpu.c
+++ b/arch/arm/plat-s3c64xx/cpu.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
+#include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
@@ -104,6 +105,16 @@ static struct map_desc s3c_iodesc[] __initdata = {
 	},
 };
 
+
+struct sysdev_class s3c64xx_sysclass = {
+	.name	= "s3c64xx-core",
+};
+
+static struct sys_device s3c64xx_sysdev = {
+	.cls	= &s3c64xx_sysclass,
+};
+
+
 /* read cpu identification code */
 
 void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
@@ -117,3 +128,11 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
 	idcode = __raw_readl(S3C_VA_SYS + 0x118);
 	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
 }
+
+static __init int s3c64xx_sysdev_init(void)
+{
+	sysdev_class_register(&s3c64xx_sysclass);
+	return sysdev_register(&s3c64xx_sysdev);
+}
+
+core_initcall(s3c64xx_sysdev_init);
-- 
cgit v1.2.3


From 966bcc14386000e8b4dc7bbb426910bcb55a8588 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:32 +0000
Subject: [ARM] S3C64XX: Add IRQ PM code

Add support for saving the state of the IRQ registers over suspend.

This requires moving the S3C64XX UART registers into <plat/regs-serial.h>
and adding irq-pm.c which saves the state of all the IRQ registers.

The irq-pm.c saves all the IRQ registers, including the IRQ_EINT and
IRQ_EINT_GROUP registers as it was easier than adding three different
files. Also ensuring that all the registers are restored to the same
state as before suspend is considered to be the best thing to do.

Note, we do not suspend the VIC here, this is done by the VIC driver
itself.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/regs-serial.h |   5 ++
 arch/arm/plat-s3c64xx/Makefile               |   1 +
 arch/arm/plat-s3c64xx/irq-pm.c               | 111 +++++++++++++++++++++++++++
 arch/arm/plat-s3c64xx/irq.c                  |   5 +-
 4 files changed, 119 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/plat-s3c64xx/irq-pm.c

diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h
index 487d7d2a7e1..66af75a5cdd 100644
--- a/arch/arm/plat-s3c/include/plat/regs-serial.h
+++ b/arch/arm/plat-s3c/include/plat/regs-serial.h
@@ -189,6 +189,11 @@
 
 #define S3C2443_DIVSLOT		  (0x2C)
 
+/* S3C64XX interrupt registers. */
+#define S3C64XX_UINTP		0x30
+#define S3C64XX_UINTSP		0x34
+#define S3C64XX_UINTM		0x38
+
 #ifndef __ASSEMBLY__
 
 /* struct s3c24xx_uart_clksrc
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
index b2bc2a9ed46..12ac7a50ab7 100644
--- a/arch/arm/plat-s3c64xx/Makefile
+++ b/arch/arm/plat-s3c64xx/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_CPU_S3C6400_CLOCK)	+= s3c6400-clock.o
 
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= sleep.o
+obj-$(CONFIG_PM)		+= irq-pm.o
 
 # Device setup
 
diff --git a/arch/arm/plat-s3c64xx/irq-pm.c b/arch/arm/plat-s3c64xx/irq-pm.c
new file mode 100644
index 00000000000..ca523b5d4c1
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/irq-pm.c
@@ -0,0 +1,111 @@
+/* arch/arm/plat-s3c64xx/irq-pm.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling Power Management
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/regs-serial.h>
+#include <plat/regs-timer.h>
+#include <plat/regs-gpio.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+/* We handled all the IRQ types in this code, to save having to make several
+ * small files to handle each different type separately. Having the EINT_GRP
+ * code here shouldn't be as much bloat as the IRQ table space needed when
+ * they are enabled. The added benefit is we ensure that these registers are
+ * in the same state as we suspended.
+ */
+
+static struct sleep_save irq_save[] = {
+	SAVE_ITEM(S3C64XX_PRIORITY),
+	SAVE_ITEM(S3C64XX_EINT0CON0),
+	SAVE_ITEM(S3C64XX_EINT0CON1),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON0),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON1),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON2),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON3),
+	SAVE_ITEM(S3C64XX_EINT0MASK),
+	SAVE_ITEM(S3C64XX_TINT_CSTAT),
+};
+
+static struct irq_grp_save {
+	u32	fltcon;
+	u32	con;
+	u32	mask;
+} eint_grp_save[5];
+
+static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
+
+static int s3c64xx_irq_pm_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct irq_grp_save *grp = eint_grp_save;
+	int i;
+
+	S3C_PMDBG("%s: suspending IRQs\n", __func__);
+
+	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+		irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+		grp->con = __raw_readl(S3C64XX_EINT12CON + (i * 4));
+		grp->mask = __raw_readl(S3C64XX_EINT12MASK + (i * 4));
+		grp->fltcon = __raw_readl(S3C64XX_EINT12FLTCON + (i * 4));
+	}
+
+	return 0;
+}
+
+static int s3c64xx_irq_pm_resume(struct sys_device *dev)
+{
+	struct irq_grp_save *grp = eint_grp_save;
+	int i;
+
+	S3C_PMDBG("%s: resuming IRQs\n", __func__);
+
+	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+		__raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+		__raw_writel(grp->con, S3C64XX_EINT12CON + (i * 4));
+		__raw_writel(grp->mask, S3C64XX_EINT12MASK + (i * 4));
+		__raw_writel(grp->fltcon, S3C64XX_EINT12FLTCON + (i * 4));
+	}
+
+	S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
+	return 0;
+}
+
+static struct sysdev_driver s3c64xx_irq_driver = {
+	.suspend = s3c64xx_irq_pm_suspend,
+	.resume	 = s3c64xx_irq_pm_resume,
+};
+
+static int __init s3c64xx_irq_pm_init(void)
+{
+	return sysdev_driver_register(&s3c64xx_sysclass, &s3c64xx_irq_driver);
+}
+
+arch_initcall(s3c64xx_irq_pm_init);
+
diff --git a/arch/arm/plat-s3c64xx/irq.c b/arch/arm/plat-s3c64xx/irq.c
index f22edf7c2d2..f4c4844f9fd 100644
--- a/arch/arm/plat-s3c64xx/irq.c
+++ b/arch/arm/plat-s3c64xx/irq.c
@@ -14,12 +14,14 @@
 
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/serial_core.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 
 #include <asm/hardware/vic.h>
 
 #include <mach/map.h>
+#include <plat/regs-serial.h>
 #include <plat/regs-timer.h>
 #include <plat/cpu.h>
 
@@ -135,9 +137,6 @@ static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
 }
 
 /* UART interrupt registers, not worth adding to seperate include header */
-#define S3C64XX_UINTP	0x30
-#define S3C64XX_UINTSP	0x34
-#define S3C64XX_UINTM	0x38
 
 static void s3c_irq_uart_mask(unsigned int irq)
 {
-- 
cgit v1.2.3


From d87964c46005ccb04754f6309df0fd8f67b08c6d Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:30 +0000
Subject: [ARM] S3C: GPIO PM core GPIOlib integration

Move the GPIO suspend/resume support inline with the gpiolib support
so that it will work with both the S3C24XX and S3C64XX series.

The s3c_gpio_chip is extended to have a pm callback and a save block
to keep the state of the GPIO over suspend, and the code from the
s3c24xx implementation is added to a new common file.

The suspend process now uses the list of registered chips to go through
saving and restoring each one as appropriate, using the pm callback to
select the appropriate routine depending on the type of control register
present.

This change also means that any additional GPIO added should not require
changes to the PM.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/Makefile                 |   1 +
 arch/arm/plat-s3c/gpio.c                   |  11 +-
 arch/arm/plat-s3c/include/plat/gpio-core.h |  30 +++
 arch/arm/plat-s3c/pm-gpio.c                | 380 +++++++++++++++++++++++++++++
 arch/arm/plat-s3c24xx/gpiolib.c            |   8 +
 arch/arm/plat-s3c24xx/pm.c                 | 213 ----------------
 arch/arm/plat-s3c64xx/gpiolib.c            |  10 +-
 arch/arm/plat-s3c64xx/pm.c                 |  11 -
 8 files changed, 438 insertions(+), 226 deletions(-)
 create mode 100644 arch/arm/plat-s3c/pm-gpio.c

diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index aa995a49e56..bfc8f537db1 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -21,6 +21,7 @@ obj-y				+= gpio-config.o
 # PM support
 
 obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM)		+= pm-gpio.o
 obj-$(CONFIG_S3C2410_PM_CHECK)	+= pm-check.o
 
 # devices
diff --git a/arch/arm/plat-s3c/gpio.c b/arch/arm/plat-s3c/gpio.c
index d71dd6d9ce5..260fdc6ad68 100644
--- a/arch/arm/plat-s3c/gpio.c
+++ b/arch/arm/plat-s3c/gpio.c
@@ -16,7 +16,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <plat/gpio-core.h>
+#include <mach/gpio-core.h>
 
 #ifdef CONFIG_S3C_GPIO_TRACK
 struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
@@ -140,6 +140,15 @@ __init void s3c_gpiolib_add(struct s3c_gpio_chip *chip)
 	if (!gc->get)
 		gc->get = s3c_gpiolib_get;
 
+#ifdef CONFIG_PM
+	if (chip->pm != NULL) {
+		if (!chip->pm->save || !chip->pm->resume)
+			printk(KERN_ERR "gpio: %s has missing PM functions\n",
+			       gc->label);
+	} else
+		printk(KERN_ERR "gpio: %s has no PM function\n", gc->label);
+#endif
+
 	/* gpiochip_add() prints own failure message on error. */
 	ret = gpiochip_add(gc);
 	if (ret >= 0)
diff --git a/arch/arm/plat-s3c/include/plat/gpio-core.h b/arch/arm/plat-s3c/include/plat/gpio-core.h
index 2fc60a580ac..32af612767a 100644
--- a/arch/arm/plat-s3c/include/plat/gpio-core.h
+++ b/arch/arm/plat-s3c/include/plat/gpio-core.h
@@ -20,6 +20,18 @@
  * specific code.
 */
 
+struct s3c_gpio_chip;
+
+/**
+ * struct s3c_gpio_pm - power management (suspend/resume) information
+ * @save: Routine to save the state of the GPIO block
+ * @resume: Routine to resume the GPIO block.
+ */
+struct s3c_gpio_pm {
+	void (*save)(struct s3c_gpio_chip *chip);
+	void (*resume)(struct s3c_gpio_chip *chip);
+};
+
 struct s3c_gpio_cfg;
 
 /**
@@ -27,6 +39,7 @@ struct s3c_gpio_cfg;
  * @chip: The chip structure to be exported via gpiolib.
  * @base: The base pointer to the gpio configuration registers.
  * @config: special function and pull-resistor control information.
+ * @pm_save: Save information for suspend/resume support.
  *
  * This wrapper provides the necessary information for the Samsung
  * specific gpios being registered with gpiolib.
@@ -34,7 +47,11 @@ struct s3c_gpio_cfg;
 struct s3c_gpio_chip {
 	struct gpio_chip	chip;
 	struct s3c_gpio_cfg	*config;
+	struct s3c_gpio_pm	*pm;
 	void __iomem		*base;
+#ifdef CONFIG_PM
+	u32			pm_save[4];
+#endif
 };
 
 static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc)
@@ -75,3 +92,16 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip)
 
 static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
 #endif
+
+#ifdef CONFIG_PM
+extern struct s3c_gpio_pm s3c_gpio_pm_1bit;
+extern struct s3c_gpio_pm s3c_gpio_pm_2bit;
+extern struct s3c_gpio_pm s3c_gpio_pm_4bit;
+#define __gpio_pm(x) x
+#else
+#define s3c_gpio_pm_1bit NULL
+#define s3c_gpio_pm_2bit NULL
+#define s3c_gpio_pm_4bit NULL
+#define __gpio_pm(x) NULL
+
+#endif /* CONFIG_PM */
diff --git a/arch/arm/plat-s3c/pm-gpio.c b/arch/arm/plat-s3c/pm-gpio.c
new file mode 100644
index 00000000000..cfd326a8b69
--- /dev/null
+++ b/arch/arm/plat-s3c/pm-gpio.c
@@ -0,0 +1,380 @@
+
+/* linux/arch/arm/plat-s3c/pm-gpio.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series GPIO PM code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/gpio-core.h>
+#include <plat/pm.h>
+
+/* PM GPIO helpers */
+
+#define OFFS_CON	(0x00)
+#define OFFS_DAT	(0x04)
+#define OFFS_UP		(0x08)
+
+static void s3c_gpio_pm_1bit_save(struct s3c_gpio_chip *chip)
+{
+	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
+	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
+}
+
+static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip)
+{
+	void __iomem *base = chip->base;
+	u32 old_gpcon = __raw_readl(base + OFFS_CON);
+	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+	u32 gps_gpcon = chip->pm_save[0];
+	u32 gps_gpdat = chip->pm_save[1];
+	u32 gpcon;
+
+	/* GPACON only has one bit per control / data and no PULLUPs.
+	 * GPACON[x] = 0 => Output, 1 => SFN */
+
+	/* first set all SFN bits to SFN */
+
+	gpcon = old_gpcon | gps_gpcon;
+	__raw_writel(gpcon, base + OFFS_CON);
+
+	/* now set all the other bits */
+
+	__raw_writel(gps_gpdat, base + OFFS_DAT);
+	__raw_writel(gps_gpcon, base + OFFS_CON);
+
+	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
+		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+}
+
+struct s3c_gpio_pm s3c_gpio_pm_1bit = {
+	.save	= s3c_gpio_pm_1bit_save,
+	.resume = s3c_gpio_pm_1bit_resume,
+};
+
+static void s3c_gpio_pm_2bit_save(struct s3c_gpio_chip *chip)
+{
+	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
+	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
+	chip->pm_save[2] = __raw_readl(chip->base + OFFS_UP);
+}
+
+/* Test whether the given masked+shifted bits of an GPIO configuration
+ * are one of the SFN (special function) modes. */
+
+static inline int is_sfn(unsigned long con)
+{
+	return con >= 2;
+}
+
+/* Test if the given masked+shifted GPIO configuration is an input */
+
+static inline int is_in(unsigned long con)
+{
+	return con == 0;
+}
+
+/* Test if the given masked+shifted GPIO configuration is an output */
+
+static inline int is_out(unsigned long con)
+{
+	return con == 1;
+}
+
+/**
+ * s3c_gpio_pm_2bit_resume() - restore the given GPIO bank
+ * @chip: The chip information to resume.
+ *
+ * Restore one of the GPIO banks that was saved during suspend. This is
+ * not as simple as once thought, due to the possibility of glitches
+ * from the order that the CON and DAT registers are set in.
+ *
+ * The three states the pin can be are {IN,OUT,SFN} which gives us 9
+ * combinations of changes to check. Three of these, if the pin stays
+ * in the same configuration can be discounted. This leaves us with
+ * the following:
+ *
+ * { IN => OUT }  Change DAT first
+ * { IN => SFN }  Change CON first
+ * { OUT => SFN } Change CON first, so new data will not glitch
+ * { OUT => IN }  Change CON first, so new data will not glitch
+ * { SFN => IN }  Change CON first
+ * { SFN => OUT } Change DAT first, so new data will not glitch [1]
+ *
+ * We do not currently deal with the UP registers as these control
+ * weak resistors, so a small delay in change should not need to bring
+ * these into the calculations.
+ *
+ * [1] this assumes that writing to a pin DAT whilst in SFN will set the
+ *     state for when it is next output.
+ */
+static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip)
+{
+	void __iomem *base = chip->base;
+	u32 old_gpcon = __raw_readl(base + OFFS_CON);
+	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+	u32 gps_gpcon = chip->pm_save[0];
+	u32 gps_gpdat = chip->pm_save[1];
+	u32 gpcon, old, new, mask;
+	u32 change_mask = 0x0;
+	int nr;
+
+	/* restore GPIO pull-up settings */
+	__raw_writel(chip->pm_save[2], base + OFFS_UP);
+
+	/* Create a change_mask of all the items that need to have
+	 * their CON value changed before their DAT value, so that
+	 * we minimise the work between the two settings.
+	 */
+
+	for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
+		old = (old_gpcon & mask) >> nr;
+		new = (gps_gpcon & mask) >> nr;
+
+		/* If there is no change, then skip */
+
+		if (old == new)
+			continue;
+
+		/* If both are special function, then skip */
+
+		if (is_sfn(old) && is_sfn(new))
+			continue;
+
+		/* Change is IN => OUT, do not change now */
+
+		if (is_in(old) && is_out(new))
+			continue;
+
+		/* Change is SFN => OUT, do not change now */
+
+		if (is_sfn(old) && is_out(new))
+			continue;
+
+		/* We should now be at the case of IN=>SFN,
+		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
+
+		change_mask |= mask;
+	}
+
+
+	/* Write the new CON settings */
+
+	gpcon = old_gpcon & ~change_mask;
+	gpcon |= gps_gpcon & change_mask;
+
+	__raw_writel(gpcon, base + OFFS_CON);
+
+	/* Now change any items that require DAT,CON */
+
+	__raw_writel(gps_gpdat, base + OFFS_DAT);
+	__raw_writel(gps_gpcon, base + OFFS_CON);
+
+	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
+		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+}
+
+struct s3c_gpio_pm s3c_gpio_pm_2bit = {
+	.save	= s3c_gpio_pm_2bit_save,
+	.resume = s3c_gpio_pm_2bit_resume,
+};
+
+#ifdef CONFIG_ARCH_S3C64XX
+static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip)
+{
+	chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
+	chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
+	chip->pm_save[3] = __raw_readl(chip->base + OFFS_UP);
+
+	if (chip->chip.ngpio > 8)
+		chip->pm_save[0] = __raw_readl(chip->base - 4);
+}
+
+static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
+{
+	u32 old, new, mask;
+	u32 change_mask = 0x0;
+	int nr;
+
+	for (nr = 0, mask = 0x0f; nr < 16; nr += 4, mask <<= 4) {
+		old = (old_gpcon & mask) >> nr;
+		new = (gps_gpcon & mask) >> nr;
+
+		/* If there is no change, then skip */
+
+		if (old == new)
+			continue;
+
+		/* If both are special function, then skip */
+
+		if (is_sfn(old) && is_sfn(new))
+			continue;
+
+		/* Change is IN => OUT, do not change now */
+
+		if (is_in(old) && is_out(new))
+			continue;
+
+		/* Change is SFN => OUT, do not change now */
+
+		if (is_sfn(old) && is_out(new))
+			continue;
+
+		/* We should now be at the case of IN=>SFN,
+		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
+
+		change_mask |= mask;
+	}
+
+	return change_mask;
+}
+
+static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index)
+{
+	void __iomem *con = chip->base + (index * 4);
+	u32 old_gpcon = __raw_readl(con);
+	u32 gps_gpcon = chip->pm_save[index + 1];
+	u32 gpcon, mask;
+
+	mask = s3c_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
+
+	gpcon = old_gpcon & ~mask;
+	gpcon |= gps_gpcon & mask;
+
+	__raw_writel(gpcon, con);
+}
+
+static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip)
+{
+	void __iomem *base = chip->base;
+	u32 old_gpcon[2];
+	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+	u32 gps_gpdat = chip->pm_save[2];
+
+	/* First, modify the CON settings */
+
+	old_gpcon[0] = 0;
+	old_gpcon[1] = __raw_readl(base + OFFS_CON);
+
+	s3c_gpio_pm_4bit_con(chip, 0);
+	if (chip->chip.ngpio > 8) {
+		old_gpcon[0] = __raw_readl(base - 4);
+		s3c_gpio_pm_4bit_con(chip, -1);
+	}
+
+	/* Now change the configurations that require DAT,CON */
+
+	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
+	__raw_writel(chip->pm_save[1], base + OFFS_CON);
+	if (chip->chip.ngpio > 8)
+		__raw_writel(chip->pm_save[0], base - 4);
+
+	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
+	__raw_writel(chip->pm_save[3], base + OFFS_UP);
+
+	if (chip->chip.ngpio > 8) {
+		S3C_PMDBG("%s: CON4 %08x,%08x => %08x,%08x, DAT %08x => %08x\n",
+			  chip->chip.label, old_gpcon[0], old_gpcon[1],
+			  __raw_readl(base - 4),
+			  __raw_readl(base + OFFS_CON),
+			  old_gpdat, gps_gpdat);
+	} else
+		S3C_PMDBG("%s: CON4 %08x => %08x, DAT %08x => %08x\n",
+			  chip->chip.label, old_gpcon[1],
+			  __raw_readl(base + OFFS_CON),
+			  old_gpdat, gps_gpdat);
+}
+
+struct s3c_gpio_pm s3c_gpio_pm_4bit = {
+	.save	= s3c_gpio_pm_4bit_save,
+	.resume = s3c_gpio_pm_4bit_resume,
+};
+#endif /* CONFIG_ARCH_S3C64XX */
+
+/**
+ * s3c_pm_save_gpio() - save gpio chip data for suspend
+ * @ourchip: The chip for suspend.
+ */
+static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip)
+{
+	struct s3c_gpio_pm *pm = ourchip->pm;
+
+	if (pm == NULL || pm->save == NULL)
+		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
+	else
+		pm->save(ourchip);
+}
+
+/**
+ * s3c_pm_save_gpios() - Save the state of the GPIO banks.
+ *
+ * For all the GPIO banks, save the state of each one ready for going
+ * into a suspend mode.
+ */
+void s3c_pm_save_gpios(void)
+{
+	struct s3c_gpio_chip *ourchip;
+	unsigned int gpio_nr;
+
+	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
+		ourchip = s3c_gpiolib_getchip(gpio_nr);
+		if (!ourchip)
+			continue;
+
+		s3c_pm_save_gpio(ourchip);
+
+		S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
+			  ourchip->chip.label,
+			  ourchip->pm_save[0],
+			  ourchip->pm_save[1],
+			  ourchip->pm_save[2],
+			  ourchip->pm_save[3]);
+
+		gpio_nr += ourchip->chip.ngpio;
+		gpio_nr += CONFIG_S3C_GPIO_SPACE;
+	}
+}
+
+/**
+ * s3c_pm_resume_gpio() - restore gpio chip data after suspend
+ * @ourchip: The suspended chip.
+ */
+static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip)
+{
+	struct s3c_gpio_pm *pm = ourchip->pm;
+
+	if (pm == NULL || pm->resume == NULL)
+		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
+	else
+		pm->resume(ourchip);
+}
+
+void s3c_pm_restore_gpios(void)
+{
+	struct s3c_gpio_chip *ourchip;
+	unsigned int gpio_nr;
+
+	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
+		ourchip = s3c_gpiolib_getchip(gpio_nr);
+		if (!ourchip)
+			continue;
+
+		s3c_pm_resume_gpio(ourchip);
+
+		gpio_nr += ourchip->chip.ngpio;
+		gpio_nr += CONFIG_S3C_GPIO_SPACE;
+	}
+}
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 5c0491bf738..4bac12dc073 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -22,6 +22,7 @@
 #include <mach/gpio-core.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
+#include <plat/pm.h>
 
 #include <mach/regs-gpio.h>
 
@@ -78,6 +79,7 @@ static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset)
 struct s3c_gpio_chip s3c24xx_gpios[] = {
 	[0] = {
 		.base	= S3C24XX_GPIO_BASE(S3C2410_GPA0),
+		.pm	= __gpio_pm(&s3c_gpio_pm_1bit),
 		.chip	= {
 			.base			= S3C2410_GPA0,
 			.owner			= THIS_MODULE,
@@ -89,6 +91,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 	},
 	[1] = {
 		.base	= S3C24XX_GPIO_BASE(S3C2410_GPB0),
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
 			.base			= S3C2410_GPB0,
 			.owner			= THIS_MODULE,
@@ -98,6 +101,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 	},
 	[2] = {
 		.base	= S3C24XX_GPIO_BASE(S3C2410_GPC0),
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
 			.base			= S3C2410_GPC0,
 			.owner			= THIS_MODULE,
@@ -107,6 +111,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 	},
 	[3] = {
 		.base	= S3C24XX_GPIO_BASE(S3C2410_GPD0),
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
 			.base			= S3C2410_GPD0,
 			.owner			= THIS_MODULE,
@@ -116,6 +121,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 	},
 	[4] = {
 		.base	= S3C24XX_GPIO_BASE(S3C2410_GPE0),
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
 			.base			= S3C2410_GPE0,
 			.label			= "GPIOE",
@@ -125,6 +131,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 	},
 	[5] = {
 		.base	= S3C24XX_GPIO_BASE(S3C2410_GPF0),
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
 			.base			= S3C2410_GPF0,
 			.owner			= THIS_MODULE,
@@ -135,6 +142,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 	},
 	[6] = {
 		.base	= S3C24XX_GPIO_BASE(S3C2410_GPG0),
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
 			.base			= S3C2410_GPG0,
 			.owner			= THIS_MODULE,
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 062a29339a9..5135c40a1b9 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -75,43 +75,10 @@ static struct sleep_save core_save[] = {
 	SAVE_ITEM(S3C2410_CLKSLOW),
 };
 
-static struct gpio_sleep {
-	void __iomem	*base;
-	unsigned int	 gpcon;
-	unsigned int	 gpdat;
-	unsigned int	 gpup;
-} gpio_save[] = {
-	[0] = {
-		.base	= S3C2410_GPACON,
-	},
-	[1] = {
-		.base	= S3C2410_GPBCON,
-	},
-	[2] = {
-		.base	= S3C2410_GPCCON,
-	},
-	[3] = {
-		.base	= S3C2410_GPDCON,
-	},
-	[4] = {
-		.base	= S3C2410_GPECON,
-	},
-	[5] = {
-		.base	= S3C2410_GPFCON,
-	},
-	[6] = {
-		.base	= S3C2410_GPGCON,
-	},
-	[7] = {
-		.base	= S3C2410_GPHCON,
-	},
-};
-
 static struct sleep_save misc_save[] = {
 	SAVE_ITEM(S3C2410_DCLKCON),
 };
 
-
 /* s3c_pm_check_resume_pin
  *
  * check to see if the pin is configured correctly for sleep mode, and
@@ -165,186 +132,6 @@ void s3c_pm_configure_extint(void)
 	}
 }
 
-/* offsets for CON/DAT/UP registers */
-
-#define OFFS_CON	(S3C2410_GPACON - S3C2410_GPACON)
-#define OFFS_DAT	(S3C2410_GPADAT - S3C2410_GPACON)
-#define OFFS_UP		(S3C2410_GPBUP  - S3C2410_GPBCON)
-
-/* s3c_pm_save_gpios()
- *
- * Save the state of the GPIOs
- */
-
-void s3c_pm_save_gpios(void)
-{
-	struct gpio_sleep *gps = gpio_save;
-	unsigned int gpio;
-
-	for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
-		void __iomem *base = gps->base;
-
-		gps->gpcon = __raw_readl(base + OFFS_CON);
-		gps->gpdat = __raw_readl(base + OFFS_DAT);
-
-		if (gpio > 0)
-			gps->gpup = __raw_readl(base + OFFS_UP);
-
-	}
-}
-
-/* Test whether the given masked+shifted bits of an GPIO configuration
- * are one of the SFN (special function) modes. */
-
-static inline int is_sfn(unsigned long con)
-{
-	return (con == 2 || con == 3);
-}
-
-/* Test if the given masked+shifted GPIO configuration is an input */
-
-static inline int is_in(unsigned long con)
-{
-	return con == 0;
-}
-
-/* Test if the given masked+shifted GPIO configuration is an output */
-
-static inline int is_out(unsigned long con)
-{
-	return con == 1;
-}
-
-/**
- * s3c2410_pm_restore_gpio() - restore the given GPIO bank
- * @index: The number of the GPIO bank being resumed.
- * @gps: The sleep confgiuration for the bank.
- *
- * Restore one of the GPIO banks that was saved during suspend. This is
- * not as simple as once thought, due to the possibility of glitches
- * from the order that the CON and DAT registers are set in.
- *
- * The three states the pin can be are {IN,OUT,SFN} which gives us 9
- * combinations of changes to check. Three of these, if the pin stays
- * in the same configuration can be discounted. This leaves us with
- * the following:
- *
- * { IN => OUT }  Change DAT first
- * { IN => SFN }  Change CON first
- * { OUT => SFN } Change CON first, so new data will not glitch
- * { OUT => IN }  Change CON first, so new data will not glitch
- * { SFN => IN }  Change CON first
- * { SFN => OUT } Change DAT first, so new data will not glitch [1]
- *
- * We do not currently deal with the UP registers as these control
- * weak resistors, so a small delay in change should not need to bring
- * these into the calculations.
- *
- * [1] this assumes that writing to a pin DAT whilst in SFN will set the
- *     state for when it is next output.
- */
-
-static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps)
-{
-	void __iomem *base = gps->base;
-	unsigned long gps_gpcon = gps->gpcon;
-	unsigned long gps_gpdat = gps->gpdat;
-	unsigned long old_gpcon;
-	unsigned long old_gpdat;
-	unsigned long old_gpup = 0x0;
-	unsigned long gpcon;
-	int nr;
-
-	old_gpcon = __raw_readl(base + OFFS_CON);
-	old_gpdat = __raw_readl(base + OFFS_DAT);
-
-	if (base == S3C2410_GPACON) {
-		/* GPACON only has one bit per control / data and no PULLUPs.
-		 * GPACON[x] = 0 => Output, 1 => SFN */
-
-		/* first set all SFN bits to SFN */
-
-		gpcon = old_gpcon | gps->gpcon;
-		__raw_writel(gpcon, base + OFFS_CON);
-
-		/* now set all the other bits */
-
-		__raw_writel(gps_gpdat, base + OFFS_DAT);
-		__raw_writel(gps_gpcon, base + OFFS_CON);
-	} else {
-		unsigned long old, new, mask;
-		unsigned long change_mask = 0x0;
-
-		old_gpup = __raw_readl(base + OFFS_UP);
-
-		/* Create a change_mask of all the items that need to have
-		 * their CON value changed before their DAT value, so that
-		 * we minimise the work between the two settings.
-		 */
-
-		for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
-			old = (old_gpcon & mask) >> nr;
-			new = (gps_gpcon & mask) >> nr;
-
-			/* If there is no change, then skip */
-
-			if (old == new)
-				continue;
-
-			/* If both are special function, then skip */
-
-			if (is_sfn(old) && is_sfn(new))
-				continue;
-
-			/* Change is IN => OUT, do not change now */
-
-			if (is_in(old) && is_out(new))
-				continue;
-
-			/* Change is SFN => OUT, do not change now */
-
-			if (is_sfn(old) && is_out(new))
-				continue;
-
-			/* We should now be at the case of IN=>SFN,
-			 * OUT=>SFN, OUT=>IN, SFN=>IN. */
-
-			change_mask |= mask;
-		}
-
-		/* Write the new CON settings */
-
-		gpcon = old_gpcon & ~change_mask;
-		gpcon |= gps_gpcon & change_mask;
-
-		__raw_writel(gpcon, base + OFFS_CON);
-
-		/* Now change any items that require DAT,CON */
-
-		__raw_writel(gps_gpdat, base + OFFS_DAT);
-		__raw_writel(gps_gpcon, base + OFFS_CON);
-		__raw_writel(gps->gpup, base + OFFS_UP);
-	}
-
-	S3C_PMDBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n",
-		  index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
-}
-
-
-/** s3c2410_pm_restore_gpios()
- *
- * Restore the state of the GPIOs
- */
-
-void s3c_pm_restore_gpios(void)
-{
-	struct gpio_sleep *gps = gpio_save;
-	int gpio;
-
-	for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
-		s3c2410_pm_restore_gpio(gpio, gps);
-	}
-}
 
 void s3c_pm_restore_core(void)
 {
diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c
index ee9188add8f..ccb82e85496 100644
--- a/arch/arm/plat-s3c64xx/gpiolib.c
+++ b/arch/arm/plat-s3c64xx/gpiolib.c
@@ -385,12 +385,19 @@ static __init void s3c64xx_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
 {
 	chip->chip.direction_input = s3c64xx_gpiolib_4bit_input;
 	chip->chip.direction_output = s3c64xx_gpiolib_4bit_output;
+	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
 }
 
 static __init void s3c64xx_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
 {
 	chip->chip.direction_input = s3c64xx_gpiolib_4bit2_input;
 	chip->chip.direction_output = s3c64xx_gpiolib_4bit2_output;
+	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
+}
+
+static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
+{
+	chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
 }
 
 static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
@@ -412,7 +419,8 @@ static __init int s3c64xx_gpiolib_init(void)
 	s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
 			    s3c64xx_gpiolib_add_4bit2);
 
-	s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit), NULL);
+	s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
+			    s3c64xx_gpiolib_add_2bit);
 
 	return 0;
 }
diff --git a/arch/arm/plat-s3c64xx/pm.c b/arch/arm/plat-s3c64xx/pm.c
index 98190aa364a..07a6516a4f3 100644
--- a/arch/arm/plat-s3c64xx/pm.c
+++ b/arch/arm/plat-s3c64xx/pm.c
@@ -96,17 +96,6 @@ void s3c_pm_configure_extint(void)
 	__raw_writel(s3c_irqwake_eintmask, S3C64XX_EINT_MASK);
 }
 
-void s3c_pm_save_gpios(void)
-{
-	/* currently, unless the bootloader does something really stupid
-	 * the gpio blocks should be maintained over their sleep.
-	 */
-}
-
-void s3c_pm_restore_gpios(void)
-{
-}
-
 void s3c_pm_restore_core(void)
 {
 	__raw_writel(0, S3C64XX_EINT_MASK);
-- 
cgit v1.2.3


From c07f87f22ecc94201893b7a25430b7f5d5fd6de8 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 24 Mar 2009 15:30:07 +0000
Subject: [ARM] VIC: Add power management device

Add power management support to the VIC by registering
each VIC as a system device to get suspend/resume
events going.

Since the VIC registeration is done early, we need to
record the VICs in a static array which is used to add
the system devices later once the initcalls are run. This
means there is now a configuration value for the number
of VICs in the system.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/common/Kconfig             |   7 ++
 arch/arm/common/vic.c               | 221 ++++++++++++++++++++++++++++++++++--
 arch/arm/include/asm/hardware/vic.h |   2 +-
 arch/arm/mach-ep93xx/core.c         |   4 +-
 arch/arm/mach-netx/generic.c        |   2 +-
 arch/arm/mach-versatile/core.c      |   2 +-
 arch/arm/plat-s3c64xx/irq.c         |   4 +-
 7 files changed, 228 insertions(+), 14 deletions(-)

diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index a2cd9beaf37..38518d450bc 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -4,6 +4,13 @@ config ARM_GIC
 config ARM_VIC
 	bool
 
+config ARM_VIC_NR
+	int
+	default 2
+	help
+	  The maximum number of VICs available in the system, for
+	  power management.
+
 config ICST525
 	bool
 
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index b2a781d9ce0..887c6eb3a18 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -21,6 +21,7 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/io.h>
+#include <linux/sysdev.h>
 
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
@@ -39,11 +40,219 @@ static void vic_unmask_irq(unsigned int irq)
 	writel(1 << irq, base + VIC_INT_ENABLE);
 }
 
+/**
+ * vic_init2 - common initialisation code
+ * @base: Base of the VIC.
+ *
+ * Common initialisation code for registeration
+ * and resume.
+*/
+static void vic_init2(void __iomem *base)
+{
+	int i;
+
+	for (i = 0; i < 16; i++) {
+		void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+		writel(VIC_VECT_CNTL_ENABLE | i, reg);
+	}
+
+	writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+}
+
+#if defined(CONFIG_PM)
+/**
+ * struct vic_device - VIC PM device
+ * @sysdev: The system device which is registered.
+ * @irq: The IRQ number for the base of the VIC.
+ * @base: The register base for the VIC.
+ * @resume_sources: A bitmask of interrupts for resume.
+ * @resume_irqs: The IRQs enabled for resume.
+ * @int_select: Save for VIC_INT_SELECT.
+ * @int_enable: Save for VIC_INT_ENABLE.
+ * @soft_int: Save for VIC_INT_SOFT.
+ * @protect: Save for VIC_PROTECT.
+ */
+struct vic_device {
+	struct sys_device sysdev;
+
+	void __iomem	*base;
+	int		irq;
+	u32		resume_sources;
+	u32		resume_irqs;
+	u32		int_select;
+	u32		int_enable;
+	u32		soft_int;
+	u32		protect;
+};
+
+/* we cannot allocate memory when VICs are initially registered */
+static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
+
+static inline struct vic_device *to_vic(struct sys_device *sys)
+{
+	return container_of(sys, struct vic_device, sysdev);
+}
+
+static int vic_id;
+
+static int vic_class_resume(struct sys_device *dev)
+{
+	struct vic_device *vic = to_vic(dev);
+	void __iomem *base = vic->base;
+
+	printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base);
+
+	/* re-initialise static settings */
+	vic_init2(base);
+
+	writel(vic->int_select, base + VIC_INT_SELECT);
+	writel(vic->protect, base + VIC_PROTECT);
+
+	/* set the enabled ints and then clear the non-enabled */
+	writel(vic->int_enable, base + VIC_INT_ENABLE);
+	writel(~vic->int_enable, base + VIC_INT_ENABLE_CLEAR);
+
+	/* and the same for the soft-int register */
+
+	writel(vic->soft_int, base + VIC_INT_SOFT);
+	writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR);
+
+	return 0;
+}
+
+static int vic_class_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct vic_device *vic = to_vic(dev);
+	void __iomem *base = vic->base;
+
+	printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base);
+
+	vic->int_select = readl(base + VIC_INT_SELECT);
+	vic->int_enable = readl(base + VIC_INT_ENABLE);
+	vic->soft_int = readl(base + VIC_INT_SOFT);
+	vic->protect = readl(base + VIC_PROTECT);
+
+	/* set the interrupts (if any) that are used for
+	 * resuming the system */
+
+	writel(vic->resume_irqs, base + VIC_INT_ENABLE);
+	writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR);
+
+	return 0;
+}
+
+struct sysdev_class vic_class = {
+	.name		= "vic",
+	.suspend	= vic_class_suspend,
+	.resume		= vic_class_resume,
+};
+
+/**
+ * vic_pm_register - Register a VIC for later power management control
+ * @base: The base address of the VIC.
+ * @irq: The base IRQ for the VIC.
+ * @resume_sources: bitmask of interrupts allowed for resume sources.
+ *
+ * Register the VIC with the system device tree so that it can be notified
+ * of suspend and resume requests and ensure that the correct actions are
+ * taken to re-instate the settings on resume.
+ */
+static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
+{
+	struct vic_device *v;
+
+	if (vic_id >= ARRAY_SIZE(vic_devices))
+		printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
+	else {
+		v = &vic_devices[vic_id];
+		v->base = base;
+		v->resume_sources = resume_sources;
+		v->irq = irq;
+		vic_id++;
+	}
+}
+
+/**
+ * vic_pm_init - initicall to register VIC pm
+ *
+ * This is called via late_initcall() to register
+ * the resources for the VICs due to the early
+ * nature of the VIC's registration.
+*/
+static int __init vic_pm_init(void)
+{
+	struct vic_device *dev = vic_devices;
+	int err;
+	int id;
+
+	if (vic_id == 0)
+		return 0;
+
+	err = sysdev_class_register(&vic_class);
+	if (err) {
+		printk(KERN_ERR "%s: cannot register class\n", __func__);
+		return err;
+	}
+
+	for (id = 0; id < vic_id; id++, dev++) {
+		dev->sysdev.id = id;
+		dev->sysdev.cls = &vic_class;
+
+		err = sysdev_register(&dev->sysdev);
+		if (err) {
+			printk(KERN_ERR "%s: failed to register device\n",
+			       __func__);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+late_initcall(vic_pm_init);
+
+static struct vic_device *vic_from_irq(unsigned int irq)
+{
+        struct vic_device *v = vic_devices;
+	unsigned int base_irq = irq & ~31;
+	int id;
+
+	for (id = 0; id < vic_id; id++, v++) {
+		if (v->irq == base_irq)
+			return v;
+	}
+
+	return NULL;
+}
+
+static int vic_set_wake(unsigned int irq, unsigned int on)
+{
+	struct vic_device *v = vic_from_irq(irq);
+	unsigned int off = irq & 31;
+
+	if (!v)
+		return -EINVAL;
+
+	if (on)
+		v->resume_irqs |= 1 << off;
+	else
+		v->resume_irqs &= ~(1 << off);
+
+	return 0;
+}
+
+#else
+static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
+
+#define vic_set_wake NULL
+#endif /* CONFIG_PM */
+
 static struct irq_chip vic_chip = {
 	.name	= "VIC",
 	.ack	= vic_mask_irq,
 	.mask	= vic_mask_irq,
 	.unmask	= vic_unmask_irq,
+	.set_wake = vic_set_wake,
 };
 
 /**
@@ -51,9 +260,10 @@ static struct irq_chip vic_chip = {
  * @base: iomem base address
  * @irq_start: starting interrupt number, must be muliple of 32
  * @vic_sources: bitmask of interrupt sources to allow
+ * @resume_sources: bitmask of interrupt sources to allow for resume
  */
 void __init vic_init(void __iomem *base, unsigned int irq_start,
-		     u32 vic_sources)
+		     u32 vic_sources, u32 resume_sources)
 {
 	unsigned int i;
 
@@ -77,12 +287,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 		writel(value, base + VIC_PL190_VECT_ADDR);
 	}
 
-	for (i = 0; i < 16; i++) {
-		void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
-		writel(VIC_VECT_CNTL_ENABLE | i, reg);
-	}
-
-	writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+	vic_init2(base);
 
 	for (i = 0; i < 32; i++) {
 		if (vic_sources & (1 << i)) {
@@ -94,4 +299,6 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 		}
 	}
+
+	vic_pm_register(base, irq_start, resume_sources);
 }
diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h
index f87328d4a18..5d72550a809 100644
--- a/arch/arm/include/asm/hardware/vic.h
+++ b/arch/arm/include/asm/hardware/vic.h
@@ -41,7 +41,7 @@
 #define VIC_PL192_VECT_ADDR		0xF00
 
 #ifndef __ASSEMBLY__
-void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources);
+void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
 #endif
 
 #endif
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index ae24486f858..6faa3dc29ce 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -362,8 +362,8 @@ void __init ep93xx_init_irq(void)
 {
 	int gpio_irq;
 
-	vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK);
-	vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK);
+	vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
+	vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
 
 	for (gpio_irq = gpio_to_irq(0);
 	     gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index 79df60c20e7..43da8bb4926 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -168,7 +168,7 @@ void __init netx_init_irq(void)
 {
 	int irq;
 
-	vic_init(__io(io_p2v(NETX_PA_VIC)), 0, ~0);
+	vic_init(__io(io_p2v(NETX_PA_VIC)), 0, ~0, 0);
 
 	for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) {
 		set_irq_chip(irq, &netx_hif_chip);
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 1f929c391af..c39c788e273 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -116,7 +116,7 @@ void __init versatile_init_irq(void)
 {
 	unsigned int i;
 
-	vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0);
+	vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0);
 
 	set_irq_chained_handler(IRQ_VICSOURCE31, sic_handle_irq);
 
diff --git a/arch/arm/plat-s3c64xx/irq.c b/arch/arm/plat-s3c64xx/irq.c
index f4c4844f9fd..8dc5b6da978 100644
--- a/arch/arm/plat-s3c64xx/irq.c
+++ b/arch/arm/plat-s3c64xx/irq.c
@@ -232,8 +232,8 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
 	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
 
 	/* initialise the pair of VICs */
-	vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid);
-	vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid);
+	vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid, 0);
+	vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid, 0);
 
 	/* add the timer sub-irqs */
 
-- 
cgit v1.2.3


From 2ab408e8759ad4b2a9bad3647838acd648d2c10c Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 24 Mar 2009 16:09:06 +0000
Subject: [ARM] SMDK6400: Initial machine support for SMDK6400

Add minimial support for the SMDK6400 board to test
the S3C6400 support.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6400/Kconfig         |  9 ++++
 arch/arm/mach-s3c6400/Makefile        |  4 ++
 arch/arm/mach-s3c6400/mach-smdk6400.c | 96 +++++++++++++++++++++++++++++++++++
 3 files changed, 109 insertions(+)
 create mode 100644 arch/arm/mach-s3c6400/mach-smdk6400.c

diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig
index 6da82b5c09b..da87f2df103 100644
--- a/arch/arm/mach-s3c6400/Kconfig
+++ b/arch/arm/mach-s3c6400/Kconfig
@@ -6,3 +6,12 @@
 # Licensed under GPLv2
 
 # Currently nothing here, this will be added later
+
+# machine support
+
+config MACH_SMDK6400
+       bool "SMDK6400"
+	select CPU_S3C6410
+	select S3C_DEV_HSMMC
+	help
+	  Machine support for the Samsung SMDK6400
diff --git a/arch/arm/mach-s3c6400/Makefile b/arch/arm/mach-s3c6400/Makefile
index 8f397db25b8..82cb48a2c2b 100644
--- a/arch/arm/mach-s3c6400/Makefile
+++ b/arch/arm/mach-s3c6400/Makefile
@@ -13,3 +13,7 @@ obj-				:=
 # Core support for S3C6400 system
 
 obj-n				+= blank.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_SMDK6400)	+= mach-smdk6400.o
diff --git a/arch/arm/mach-s3c6400/mach-smdk6400.c b/arch/arm/mach-s3c6400/mach-smdk6400.c
new file mode 100644
index 00000000000..d020a2ac5b5
--- /dev/null
+++ b/arch/arm/mach-s3c6400/mach-smdk6400.c
@@ -0,0 +1,96 @@
+/* linux/arch/arm/mach-s3c6400/mach-smdk6400.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/s3c6400.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/iic.h>
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk6400_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+};
+
+static struct map_desc smdk6400_iodesc[] = {};
+
+static void __init smdk6400_map_io(void)
+{
+	s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
+}
+
+static struct platform_device *smdk6400_devices[] __initdata = {
+	&s3c_device_hsmmc1,
+	&s3c_device_i2c0,
+};
+
+static struct i2c_board_info i2c_devs[] __initdata = {
+	{ I2C_BOARD_INFO("WM8753", 0x1A), },
+	{ I2C_BOARD_INFO("24c08", 0x50), },
+};
+
+static void __init smdk6400_machine_init(void)
+{
+	i2c_register_board_info(0, i2c_devs, ARRAY_SIZE(i2c_devs));
+	platform_add_devices(smdk6400_devices, ARRAY_SIZE(smdk6400_devices));
+}
+
+MACHINE_START(SMDK6400, "SMDK6400")
+	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+
+	.init_irq	= s3c6400_init_irq,
+	.map_io		= smdk6400_map_io,
+	.init_machine	= smdk6400_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
-- 
cgit v1.2.3


From a6925c1c515513e22b0419e1a41155c88d22b1f4 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 24 Mar 2009 17:25:40 +0000
Subject: [ARM] S3C6400: Core support for S3C6400 SoC

Add the core support files for the Samsung S3C6400 SoC.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6400/Kconfig                | 13 ++++-
 arch/arm/mach-s3c6400/Makefile               |  2 +-
 arch/arm/mach-s3c6400/s3c6400.c              | 83 ++++++++++++++++++++++++++++
 arch/arm/plat-s3c64xx/include/plat/s3c6400.h |  1 +
 4 files changed, 95 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/mach-s3c6400/s3c6400.c

diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig
index da87f2df103..f0292a8cddd 100644
--- a/arch/arm/mach-s3c6400/Kconfig
+++ b/arch/arm/mach-s3c6400/Kconfig
@@ -5,13 +5,20 @@
 #
 # Licensed under GPLv2
 
-# Currently nothing here, this will be added later
+# Configuration options for the S3C6410 CPU
 
-# machine support
+config CPU_S3C6400
+	bool
+	select CPU_S3C6400_INIT
+	select CPU_S3C6400_CLOCK
+	help
+	  Enable S3C6400 CPU support
+
+# S36400 Macchine support
 
 config MACH_SMDK6400
        bool "SMDK6400"
-	select CPU_S3C6410
+	select CPU_S3C6400
 	select S3C_DEV_HSMMC
 	help
 	  Machine support for the Samsung SMDK6400
diff --git a/arch/arm/mach-s3c6400/Makefile b/arch/arm/mach-s3c6400/Makefile
index 82cb48a2c2b..07eac2be6f6 100644
--- a/arch/arm/mach-s3c6400/Makefile
+++ b/arch/arm/mach-s3c6400/Makefile
@@ -12,7 +12,7 @@ obj-				:=
 
 # Core support for S3C6400 system
 
-obj-n				+= blank.o
+obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
 
 # Machine support
 
diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c
new file mode 100644
index 00000000000..d11a4272b94
--- /dev/null
+++ b/arch/arm/mach-s3c6400/s3c6400.c
@@ -0,0 +1,83 @@
+/* linux/arch/arm/mach-s3c6410/cpu.c
+ *
+ * Copyright 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+#include <plat/s3c6400.h>
+
+void __init s3c6400_map_io(void)
+{
+	/* the i2c device is directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+}
+
+void __init s3c6400_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+	s3c24xx_register_baseclocks(xtal);
+	s3c64xx_register_clocks();
+	s3c6400_register_clocks();
+	s3c6400_setup_clocks();
+}
+
+void __init s3c6400_init_irq(void)
+{
+	/* VIC0 does not have IRQS 5..7,
+	 * VIC1 is fully populated. */
+	s3c64xx_init_irq(~0 & ~(0xf << 5), ~0);
+}
+
+struct sysdev_class s3c6400_sysclass = {
+	.name	= "s3c6400-core",
+};
+
+static struct sys_device s3c6400_sysdev = {
+	.cls	= &s3c6400_sysclass,
+};
+
+static int __init s3c6400_core_init(void)
+{
+	return sysdev_class_register(&s3c6400_sysclass);
+}
+
+core_initcall(s3c6400_core_init);
+
+int __init s3c6400_init(void)
+{
+	printk("S3C6400: Initialising architecture\n");
+
+	return sysdev_register(&s3c6400_sysdev);
+}
diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
index 571eaa2e54f..e12296666d4 100644
--- a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
+++ b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
@@ -21,6 +21,7 @@ extern void s3c6400_setup_clocks(void);
 #ifdef CONFIG_CPU_S3C6400
 
 extern  int s3c6400_init(void);
+extern void s3c6400_init_irq(void);
 extern void s3c6400_map_io(void);
 extern void s3c6400_init_clocks(int xtal);
 
-- 
cgit v1.2.3


From e074f9803227236252c8e7be16d836d709abff57 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 24 Mar 2009 17:31:42 +0000
Subject: [ARM] S3C64XX: Add S3C6400 CPU detection.

Add detection support for the S3C6400 SoC which has it's
id register in a different place to the S3C6410.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/cpu.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/plat-s3c64xx/cpu.c
index f9fdaab32ab..19f68b5f0d3 100644
--- a/arch/arm/plat-s3c64xx/cpu.c
+++ b/arch/arm/plat-s3c64xx/cpu.c
@@ -126,6 +126,14 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
 	iotable_init(mach_desc, size);
 
 	idcode = __raw_readl(S3C_VA_SYS + 0x118);
+	if (!idcode) {
+		/* S3C6400 has the ID register in a different place,
+		 * and needs a write before it can be read. */
+
+		__raw_writel(0x0, S3C_VA_SYS + 0xA1C);
+		idcode = __raw_readl(S3C_VA_SYS + 0xA1C);
+	}
+
 	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
 }
 
-- 
cgit v1.2.3


From 4faf6867638cc21aa43b4ca4ed0bdf14a2d29762 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Wed, 25 Mar 2009 11:01:24 +0000
Subject: [ARM] S3C64XX: Add S3C6400 SDHCI setup support

Add support for S3C6400 SDHCI channels 0 and 1, making
the GPIO code common to both S3C6400 and S3C6410.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6400/Kconfig            |  7 ++++
 arch/arm/mach-s3c6400/Makefile           |  4 ++
 arch/arm/mach-s3c6400/s3c6400.c          |  7 +++-
 arch/arm/mach-s3c6400/setup-sdhci.c      | 63 ++++++++++++++++++++++++++++++++
 arch/arm/mach-s3c6410/Kconfig            |  1 +
 arch/arm/mach-s3c6410/setup-sdhci.c      | 34 -----------------
 arch/arm/plat-s3c/include/plat/sdhci.h   | 50 ++++++++++++++++++++++---
 arch/arm/plat-s3c64xx/Kconfig            |  5 +++
 arch/arm/plat-s3c64xx/Makefile           |  1 +
 arch/arm/plat-s3c64xx/setup-sdhci-gpio.c | 55 ++++++++++++++++++++++++++++
 10 files changed, 187 insertions(+), 40 deletions(-)
 create mode 100644 arch/arm/mach-s3c6400/setup-sdhci.c
 create mode 100644 arch/arm/plat-s3c64xx/setup-sdhci-gpio.c

diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig
index f0292a8cddd..f5af212066c 100644
--- a/arch/arm/mach-s3c6400/Kconfig
+++ b/arch/arm/mach-s3c6400/Kconfig
@@ -14,11 +14,18 @@ config CPU_S3C6400
 	help
 	  Enable S3C6400 CPU support
 
+config S3C6400_SETUP_SDHCI
+	bool
+	help
+	  Internal configuration for default SDHCI
+	  setup for S3C6400.
+
 # S36400 Macchine support
 
 config MACH_SMDK6400
        bool "SMDK6400"
 	select CPU_S3C6400
 	select S3C_DEV_HSMMC
+	select S3C6400_SETUP_SDHCI
 	help
 	  Machine support for the Samsung SMDK6400
diff --git a/arch/arm/mach-s3c6400/Makefile b/arch/arm/mach-s3c6400/Makefile
index 07eac2be6f6..df1ce4aa03e 100644
--- a/arch/arm/mach-s3c6400/Makefile
+++ b/arch/arm/mach-s3c6400/Makefile
@@ -14,6 +14,10 @@ obj-				:=
 
 obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
 
+# setup support
+
+obj-$(CONFIG_S3C6400_SETUP_SDHCI) += setup-sdhci.o
+
 # Machine support
 
 obj-$(CONFIG_MACH_SMDK6400)	+= mach-smdk6400.o
diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c
index d11a4272b94..bd17f3db2c2 100644
--- a/arch/arm/mach-s3c6400/s3c6400.c
+++ b/arch/arm/mach-s3c6400/s3c6400.c
@@ -40,7 +40,12 @@
 
 void __init s3c6400_map_io(void)
 {
-	/* the i2c device is directly compatible with s3c2440 */
+	/* setup SDHCI */
+
+	s3c6400_default_sdhci0();
+	s3c6400_default_sdhci1();
+
+	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 }
 
diff --git a/arch/arm/mach-s3c6400/setup-sdhci.c b/arch/arm/mach-s3c6400/setup-sdhci.c
new file mode 100644
index 00000000000..b93dafbee1f
--- /dev/null
+++ b/arch/arm/mach-s3c6400/setup-sdhci.c
@@ -0,0 +1,63 @@
+/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s3c6400_hsmmc_clksrcs[4] = {
+	[0] = "hsmmc",
+	[1] = "hsmmc",
+	[2] = "mmc_bus",
+	/* [3] = "48m", - note not succesfully used yet */
+};
+
+void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
+				  void __iomem *r,
+				  struct mmc_ios *ios,
+				  struct mmc_card *card)
+{
+	u32 ctrl2, ctrl3;
+
+	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+		  S3C_SDHCI_CTRL2_ENFBCLKRX |
+		  S3C_SDHCI_CTRL2_DFCNT_NONE |
+		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+	if (ios->clock < 25 * 1000000)
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+			 S3C_SDHCI_CTRL3_FCSEL2 |
+			 S3C_SDHCI_CTRL3_FCSEL1 |
+			 S3C_SDHCI_CTRL3_FCSEL0);
+	else
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+	printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
+	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
+
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index 0c8df9797e5..4f7ffc7ce85 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -16,6 +16,7 @@ config CPU_S3C6410
 
 config S3C6410_SETUP_SDHCI
 	bool
+	select S3C64XX_SETUP_SDHCI_GPIO
 	help
 	  Internal helper functions for S3C6410 based SDHCI systems
 
diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c
index 0b5788bd598..20666f3bd47 100644
--- a/arch/arm/mach-s3c6410/setup-sdhci.c
+++ b/arch/arm/mach-s3c6410/setup-sdhci.c
@@ -21,8 +21,6 @@
 #include <linux/mmc/card.h>
 #include <linux/mmc/host.h>
 
-#include <mach/gpio.h>
-#include <plat/gpio-cfg.h>
 #include <plat/regs-sdhci.h>
 #include <plat/sdhci.h>
 
@@ -35,22 +33,6 @@ char *s3c6410_hsmmc_clksrcs[4] = {
 	/* [3] = "48m", - note not succesfully used yet */
 };
 
-void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
-	unsigned int gpio;
-	unsigned int end;
-
-	end = S3C64XX_GPG(2 + width);
-
-	/* Set all the necessary GPG pins to special-function 0 */
-	for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
-}
 
 void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
 				    void __iomem *r,
@@ -84,19 +66,3 @@ void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
 	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
 }
 
-void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
-	unsigned int gpio;
-	unsigned int end;
-
-	end = S3C64XX_GPH(2 + width);
-
-	/* Set all the necessary GPG pins to special-function 0 */
-	for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
-}
diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-s3c/include/plat/sdhci.h
index c4ca3920ca4..f615308ccdf 100644
--- a/arch/arm/plat-s3c/include/plat/sdhci.h
+++ b/arch/arm/plat-s3c/include/plat/sdhci.h
@@ -67,12 +67,52 @@ extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
 
 /* Helper function availablity */
 
+extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+
+/* S3C6400 SDHCI setup */
+
+#ifdef CONFIG_S3C6400_SETUP_SDHCI
+extern char *s3c6400_hsmmc_clksrcs[4];
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
+					 void __iomem *r,
+					 struct mmc_ios *ios,
+					 struct mmc_card *card);
+
+static inline void s3c6400_default_sdhci0(void)
+{
+	s3c_hsmmc0_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
+	s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+}
+
+#else
+static inline void s3c6400_default_sdhci0(void) { }
+#endif  /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static inline void s3c6400_default_sdhci1(void)
+{
+	s3c_hsmmc1_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
+	s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+}
+#else
+static inline void s3c6400_default_sdhci1(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+#else
+static inline void s3c6400_default_sdhci0(void) { }
+static inline void s3c6400_default_sdhci1(void) { }
+#endif /* CONFIG_S3C6400_SETUP_SDHCI */
+
+/* S3C6410 SDHCI setup */
+
 #ifdef CONFIG_S3C6410_SETUP_SDHCI
 extern char *s3c6410_hsmmc_clksrcs[4];
 
-extern void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-
 extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
 					   void __iomem *r,
 					   struct mmc_ios *ios,
@@ -82,7 +122,7 @@ extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
 static inline void s3c6410_default_sdhci0(void)
 {
 	s3c_hsmmc0_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
-	s3c_hsmmc0_def_platdata.cfg_gpio = s3c6410_setup_sdhci0_cfg_gpio;
+	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
 	s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
 }
 #else
@@ -93,7 +133,7 @@ static inline void s3c6410_default_sdhci0(void) { }
 static inline void s3c6410_default_sdhci1(void)
 {
 	s3c_hsmmc1_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
-	s3c_hsmmc1_def_platdata.cfg_gpio = s3c6410_setup_sdhci1_cfg_gpio;
+	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
 	s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
 }
 #else
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
index ad48fd73e04..eb088db0e65 100644
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -60,4 +60,9 @@ config S3C64XX_SETUP_FB_24BPP
 	help
 	  Common setup code for S3C64XX with an 24bpp RGB display helper.
 
+config S3C64XX_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for S3C64XX SDHCI GPIO configurations
+
 endif
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
index 12ac7a50ab7..030050f5c76 100644
--- a/arch/arm/plat-s3c64xx/Makefile
+++ b/arch/arm/plat-s3c64xx/Makefile
@@ -35,3 +35,4 @@ obj-$(CONFIG_PM)		+= irq-pm.o
 obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
 obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
 obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
\ No newline at end of file
diff --git a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
new file mode 100644
index 00000000000..5417123b0ac
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
@@ -0,0 +1,55 @@
+/* linux/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/gpio.h>
+#include <plat/gpio-cfg.h>
+
+void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S3C64XX_GPG(2 + width);
+
+	/* Set all the necessary GPG pins to special-function 0 */
+	for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
+}
+
+void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S3C64XX_GPH(2 + width);
+
+	/* Set all the necessary GPG pins to special-function 0 */
+	for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
+}
-- 
cgit v1.2.3


From 19e3f4858d4a2863ad66b2c92d0f9270879eac04 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 23 Apr 2009 17:26:15 +0100
Subject: [ARM] SMDK6400: Fix WM8753 i2c board definition

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6400/mach-smdk6400.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-s3c6400/mach-smdk6400.c b/arch/arm/mach-s3c6400/mach-smdk6400.c
index d020a2ac5b5..ab19285389a 100644
--- a/arch/arm/mach-s3c6400/mach-smdk6400.c
+++ b/arch/arm/mach-s3c6400/mach-smdk6400.c
@@ -73,7 +73,7 @@ static struct platform_device *smdk6400_devices[] __initdata = {
 };
 
 static struct i2c_board_info i2c_devs[] __initdata = {
-	{ I2C_BOARD_INFO("WM8753", 0x1A), },
+	{ I2C_BOARD_INFO("wm8753", 0x1A), },
 	{ I2C_BOARD_INFO("24c08", 0x50), },
 };
 
-- 
cgit v1.2.3


From e2c977dca2901012ddabdc2a7b3c47a80c94d431 Mon Sep 17 00:00:00 2001
From: Werner Almesberger <werner@openmoko.org>
Date: Thu, 5 Mar 2009 11:43:14 +0800
Subject: [ARM] S3C6410: Add CAMIF clock

Add camera interface clock to S3C6410.

Signed-off-by: Werner Almesberger <werner@openmoko.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/s3c6400-clock.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index 05b17528041..6dd187d0474 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -520,6 +520,33 @@ static struct clksrc_clk clk_irda = {
 	.reg_divider	= S3C_CLK_DIV2,
 };
 
+static struct clk *clkset_camif_list[] = {
+	&clk_h2,
+};
+
+static struct clk_sources clkset_camif = {
+	.sources	= clkset_camif_list,
+	.nr_sources	= ARRAY_SIZE(clkset_camif_list),
+};
+
+static struct clksrc_clk clk_camif = {
+	.clk	= {
+		.name		= "camera",
+		.id		= -1,
+		.ctrlbit        = S3C_CLKCON_SCLK_CAM,
+		.enable		= s3c64xx_sclk_ctrl,
+		.set_parent	= s3c64xx_setparent_clksrc,
+		.get_rate	= s3c64xx_getrate_clksrc,
+		.set_rate	= s3c64xx_setrate_clksrc,
+		.round_rate	= s3c64xx_roundrate_clksrc,
+	},
+	.shift		= 0,
+	.mask		= 0,
+	.sources	= &clkset_camif,
+	.divider_shift	= S3C6400_CLKDIV0_CAM_SHIFT,
+	.reg_divider	= S3C_CLK_DIV0,
+};
+
 /* Clock initialisation code */
 
 static struct clksrc_clk *init_parents[] = {
@@ -536,6 +563,7 @@ static struct clksrc_clk *init_parents[] = {
 	&clk_audio0,
 	&clk_audio1,
 	&clk_irda,
+	&clk_camif,
 };
 
 static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk)
@@ -635,6 +663,7 @@ static struct clk *clks[] __initdata = {
 	&clk_audio0.clk,
 	&clk_audio1.clk,
 	&clk_irda.clk,
+	&clk_camif.clk,
 };
 
 void __init s3c6400_register_clocks(void)
-- 
cgit v1.2.3


From a03f7daf6df31b4d849031c51a3c10b8ba78ce67 Mon Sep 17 00:00:00 2001
From: Werner Almesberger <werner@openmoko.org>
Date: Thu, 5 Mar 2009 11:43:13 +0800
Subject: [ARM] S3C64XX: Add HCLKx2

Add doubled HCLK to S3C64xx.

Signed-off-by: Werner Almesberger <werner@openmoko.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/clock.h | 1 +
 arch/arm/plat-s3c64xx/clock.c          | 7 +++++++
 arch/arm/plat-s3c64xx/s3c6400-clock.c  | 1 +
 3 files changed, 9 insertions(+)

diff --git a/arch/arm/plat-s3c/include/plat/clock.h b/arch/arm/plat-s3c/include/plat/clock.h
index a10622eed43..d86af84b5b8 100644
--- a/arch/arm/plat-s3c/include/plat/clock.h
+++ b/arch/arm/plat-s3c/include/plat/clock.h
@@ -50,6 +50,7 @@ extern struct clk clk_xtal;
 extern struct clk clk_ext;
 
 /* S3C64XX specific clocks */
+extern struct clk clk_h2;
 extern struct clk clk_27m;
 extern struct clk clk_48m;
 
diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c
index ad1b9682c9c..679076f5071 100644
--- a/arch/arm/plat-s3c64xx/clock.c
+++ b/arch/arm/plat-s3c64xx/clock.c
@@ -27,6 +27,12 @@
 #include <plat/devs.h>
 #include <plat/clock.h>
 
+struct clk clk_h2 = {
+	.name		= "hclk2",
+	.id		= -1,
+	.rate		= 0,
+};
+
 struct clk clk_27m = {
 	.name		= "clk_27m",
 	.id		= -1,
@@ -246,6 +252,7 @@ static struct clk *clks[] __initdata = {
 	&clk_epll,
 	&clk_27m,
 	&clk_48m,
+	&clk_h2,
 };
 
 void __init s3c64xx_register_clocks(void)
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index 6dd187d0474..96fa9ea4d5b 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -636,6 +636,7 @@ void __init_or_cpufreq s3c6400_setup_clocks(void)
 	clk_fout_epll.rate = epll;
 	clk_fout_apll.rate = apll;
 
+	clk_h2.rate = hclk2;
 	clk_h.rate = hclk;
 	clk_p.rate = pclk;
 	clk_f.rate = fclk;
-- 
cgit v1.2.3


From 8f1ecf1d965f4e1842b32af5dd40f3d7b6d407ed Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Tue, 28 Apr 2009 16:06:24 +0100
Subject: [ARM] S3C64XX: Configure clocks for DMA controller

Add missing DMA controller block clocks.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/clock.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c
index 679076f5071..0bc2fa1dfc4 100644
--- a/arch/arm/plat-s3c64xx/clock.c
+++ b/arch/arm/plat-s3c64xx/clock.c
@@ -158,6 +158,18 @@ static struct clk init_clocks_disable[] = {
 		.parent		= &clk_48m,
 		.enable		= s3c64xx_sclk_ctrl,
 		.ctrlbit	= S3C_CLKCON_SCLK_MMC2_48,
+	}, {
+		.name		= "dma0",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_DMA0,
+	}, {
+		.name		= "dma1",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_DMA1,
 	},
 };
 
-- 
cgit v1.2.3


From 496a3f0927197ca155a604478bf6e7db3eca3bbd Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sat, 2 May 2009 13:48:53 +0100
Subject: [ARM] S3C64XX: Add ARM clock

Add ARM clock to provide 'arm' from the APLL to the ARM core.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6400/s3c6400.c              |  3 +-
 arch/arm/mach-s3c6410/cpu.c                  |  3 +-
 arch/arm/plat-s3c64xx/include/plat/s3c6400.h |  2 +-
 arch/arm/plat-s3c64xx/s3c6400-clock.c        | 76 +++++++++++++++++++++++++++-
 4 files changed, 80 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c
index bd17f3db2c2..1ece887d90b 100644
--- a/arch/arm/mach-s3c6400/s3c6400.c
+++ b/arch/arm/mach-s3c6400/s3c6400.c
@@ -30,6 +30,7 @@
 
 #include <plat/cpu-freq.h>
 #include <plat/regs-serial.h>
+#include <plat/regs-clock.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
@@ -54,7 +55,7 @@ void __init s3c6400_init_clocks(int xtal)
 	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
 	s3c24xx_register_baseclocks(xtal);
 	s3c64xx_register_clocks();
-	s3c6400_register_clocks();
+	s3c6400_register_clocks(S3C6400_CLKDIV0_ARM_MASK);
 	s3c6400_setup_clocks();
 }
 
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c
index 6a73ca6b7a3..ade904de889 100644
--- a/arch/arm/mach-s3c6410/cpu.c
+++ b/arch/arm/mach-s3c6410/cpu.c
@@ -31,6 +31,7 @@
 
 #include <plat/cpu-freq.h>
 #include <plat/regs-serial.h>
+#include <plat/regs-clock.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
@@ -68,7 +69,7 @@ void __init s3c6410_init_clocks(int xtal)
 	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
 	s3c24xx_register_baseclocks(xtal);
 	s3c64xx_register_clocks();
-	s3c6400_register_clocks();
+	s3c6400_register_clocks(S3C6410_CLKDIV0_ARM_MASK);
 	s3c6400_setup_clocks();
 }
 
diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
index e12296666d4..11f2e1e119b 100644
--- a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
+++ b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
@@ -15,7 +15,7 @@
 /* Common init code for S3C6400 related SoCs */
 
 extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c6400_register_clocks(void);
+extern void s3c6400_register_clocks(unsigned armclk_divlimit);
 extern void s3c6400_setup_clocks(void);
 
 #ifdef CONFIG_CPU_S3C6400
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index 96fa9ea4d5b..1debc1f9f98 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -133,6 +133,65 @@ static struct clksrc_clk clk_mout_mpll = {
 	.sources	= &clk_src_mpll,
 };
 
+static unsigned int armclk_mask;
+
+static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	u32 clkdiv;
+
+	/* divisor mask starts at bit0, so no need to shift */
+	clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask;
+
+	return rate / (clkdiv + 1);
+}
+
+static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
+						unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	u32 div;
+
+	if (parent < rate)
+		return rate;
+
+	div = (parent / rate) - 1;
+	if (div > armclk_mask)
+		div = armclk_mask;
+
+	return parent / (div + 1);
+}
+
+static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	u32 div;
+	u32 val;
+
+	if (rate < parent / (armclk_mask + 1))
+		return -EINVAL;
+
+	rate = clk_round_rate(clk, rate);
+	div = clk_get_rate(clk->parent) / rate;
+
+	val = __raw_readl(S3C_CLK_DIV0);
+	val &= armclk_mask;
+	val |= (div - 1);
+	__raw_writel(val, S3C_CLK_DIV0);
+
+	return 0;
+
+}
+
+static struct clk clk_arm = {
+	.name		= "armclk",
+	.id		= -1,
+	.parent		= &clk_mout_apll.clk,
+	.get_rate	= s3c64xx_clk_arm_get_rate,
+	.set_rate	= s3c64xx_clk_arm_set_rate,
+	.round_rate	= s3c64xx_clk_arm_round_rate,
+};
+
 static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
 {
 	unsigned long rate = clk_get_rate(clk->parent);
@@ -665,14 +724,29 @@ static struct clk *clks[] __initdata = {
 	&clk_audio1.clk,
 	&clk_irda.clk,
 	&clk_camif.clk,
+	&clk_arm,
 };
 
-void __init s3c6400_register_clocks(void)
+/**
+ * s3c6400_register_clocks - register clocks for s3c6400 and above
+ * @armclk_divlimit: Divisor mask for ARMCLK
+ *
+ * Register the clocks for the S3C6400 and above SoC range, such
+ * as ARMCLK and the clocks which have divider chains attached.
+ *
+ * This call does not setup the clocks, which is left to the
+ * s3c6400_setup_clocks() call which may be needed by the cpufreq
+ * or resume code to re-set the clocks if the bootloader has changed
+ * them.
+ */
+void __init s3c6400_register_clocks(unsigned armclk_divlimit)
 {
 	struct clk *clkp;
 	int ret;
 	int ptr;
 
+	armclk_mask = armclk_divlimit;
+
 	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
 		clkp = clks[ptr];
 		ret = s3c24xx_register_clock(clkp);
-- 
cgit v1.2.3


From f0e1fa760099eef43f4450471d795807a1cc43c8 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Sat, 16 May 2009 22:05:27 +0100
Subject: [ARM] S3C: Add USB high-speed/OtG device definitions

Add platform device definitions for the high-speed and OtG
capable device block on the newer Samsung parts.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6400/include/mach/map.h |  2 ++
 arch/arm/plat-s3c/Kconfig                |  5 ++++
 arch/arm/plat-s3c/Makefile               |  1 +
 arch/arm/plat-s3c/dev-usb-hsotg.c        | 41 ++++++++++++++++++++++++++++++++
 arch/arm/plat-s3c/include/plat/devs.h    |  1 +
 arch/arm/plat-s3c/include/plat/udc-hs.h  | 29 ++++++++++++++++++++++
 6 files changed, 79 insertions(+)
 create mode 100644 arch/arm/plat-s3c/dev-usb-hsotg.c
 create mode 100644 arch/arm/plat-s3c/include/plat/udc-hs.h

diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index ea4223b5509..99d5e3b420a 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -39,6 +39,7 @@
 #define S3C_VA_UART3		S3C_VA_UARTx(3)
 
 #define S3C64XX_PA_FB		(0x77100000)
+#define S3C64XX_PA_USB_HSOTG	(0x7C000000)
 #define S3C64XX_PA_SYSCON	(0x7E00F000)
 #define S3C64XX_PA_TIMER	(0x7F006000)
 #define S3C64XX_PA_IIC0		(0x7F004000)
@@ -70,5 +71,6 @@
 #define S3C_PA_IIC1		S3C64XX_PA_IIC1
 #define S3C_PA_FB		S3C64XX_PA_FB
 #define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
+#define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
 
 #endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index a4c5027421d..140391587c3 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -186,4 +186,9 @@ config S3C_DEV_USB_HOST
 	help
 	  Compile in platform device definition for USB host.
 
+config S3C_DEV_USB_HSOTG
+	bool
+	help
+	  Compile in platform device definition for USB high-speed OtG
+
 endif
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index bfc8f537db1..061e20458e8 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -32,3 +32,4 @@ obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
 obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
+obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
diff --git a/arch/arm/plat-s3c/dev-usb-hsotg.c b/arch/arm/plat-s3c/dev-usb-hsotg.c
new file mode 100644
index 00000000000..e2f604b51c8
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-usb-hsotg.c
@@ -0,0 +1,41 @@
+/* linux/arch/arm/plat-s3c/dev-usb-hsotg.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for USB high-speed UDC/OtG block
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+static struct resource s3c_usb_hsotg_resources[] = {
+	[0] = {
+		.start	= S3C_PA_USB_HSOTG,
+		.end	= S3C_PA_USB_HSOTG + 0x10000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_OTG,
+		.end	= IRQ_OTG,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_usb_hsotg = {
+	.name		= "s3c-hsotg",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_usb_hsotg_resources),
+	.resource	= s3c_usb_hsotg_resources,
+};
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 26f0cec3ac0..a0b6768fddc 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -45,6 +45,7 @@ extern struct platform_device s3c_device_spi1;
 extern struct platform_device s3c_device_nand;
 
 extern struct platform_device s3c_device_usbgadget;
+extern struct platform_device s3c_device_usb_hsotg;
 
 /* s3c2440 specific devices */
 
diff --git a/arch/arm/plat-s3c/include/plat/udc-hs.h b/arch/arm/plat-s3c/include/plat/udc-hs.h
new file mode 100644
index 00000000000..dd04db04310
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/udc-hs.h
@@ -0,0 +1,29 @@
+/* arch/arm/plat-s3c/include/plat/udc-hs.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C USB2.0 High-speed / OtG platform information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+enum s3c_hostg_dmamode {
+	S3C_HSOTG_DMA_NONE,	/* do not use DMA at-all */
+	S3C_HSOTG_DMA_ONLY,	/* always use DMA */
+	S3C_HSOTG_DMA_DRV,	/* DMA is chosen by driver */
+};
+
+/**
+ * struct s3c_hsotg_plat - platform data for high-speed otg/udc
+ * @dma: Whether to use DMA or not.
+ * @is_osc: The clock source is an oscillator, not a crystal
+ */
+struct s3c_hsotg_plat {
+	enum s3c_hostg_dmamode	dma;
+	unsigned int		is_osc : 1;
+};
-- 
cgit v1.2.3


From 06fa1d37ce9a8fab86a5db304ca5b576f0223d18 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Sat, 16 May 2009 22:11:20 +0100
Subject: [ARM] SMDK6410: Add USB high-speed/OtG gadget device

Add the USB gadget support to the SMDK6410.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6410/Kconfig         | 1 +
 arch/arm/mach-s3c6410/mach-smdk6410.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index 9c163f365c8..e63aac7f4e5 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -36,6 +36,7 @@ config MACH_SMDK6410
 	select S3C_DEV_I2C1
 	select S3C_DEV_FB
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_USB_HSOTG
 	select S3C6410_SETUP_SDHCI
 	select S3C64XX_SETUP_I2C1
 	select S3C64XX_SETUP_FB_24BPP
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 8fd7632735d..bc9a7dea567 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -183,6 +183,7 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 	&s3c_device_i2c1,
 	&s3c_device_fb,
 	&s3c_device_usb,
+	&s3c_device_usb_hsotg,
 	&smdk6410_lcd_powerdev,
 
 	&smdk6410_smsc911x,
-- 
cgit v1.2.3


From b57f0fe10712026d15a9d5a20e31f240ee72ec15 Mon Sep 17 00:00:00 2001
From: Nelson Castillo <arhuaco@freaks-unidos.net>
Date: Fri, 8 May 2009 08:10:04 -0500
Subject: [ARM] S3C: ADC: Fix lines with more than 80 chars in adc.h

Small cleanup.

Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net>
[ben-linux@fluff.org: rewrote subject]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/adc.h | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-s3c/include/plat/adc.h
index 43df2a404b0..ef92e50ac0a 100644
--- a/arch/arm/plat-s3c/include/plat/adc.h
+++ b/arch/arm/plat-s3c/include/plat/adc.h
@@ -19,10 +19,11 @@ struct s3c_adc_client;
 extern int s3c_adc_start(struct s3c_adc_client *client,
 			 unsigned int channel, unsigned int nr_samples);
 
-extern struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
-					       void (*select)(unsigned selected),
-					       void (*conv)(unsigned d0, unsigned d1),
-					       unsigned int is_ts);
+extern struct s3c_adc_client *
+	s3c_adc_register(struct platform_device *pdev,
+			 void (*select)(unsigned selected),
+			 void (*conv)(unsigned d0, unsigned d1),
+			 unsigned int is_ts);
 
 extern void s3c_adc_release(struct s3c_adc_client *client);
 
-- 
cgit v1.2.3


From 3f7ea467be1bad860c0f71ba7373dd3cf76b485a Mon Sep 17 00:00:00 2001
From: Nelson Castillo <arhuaco@freaks-unidos.net>
Date: Fri, 8 May 2009 08:10:12 -0500
Subject: [ARM] S3C: ADC: Expose number of remaining conversions to convert
 callback

This patch allow us to efficiently modify the number of
remaining conversions from the client side. This us useful
when we do not know in advance how many conversions we will
need or when we need to cancel pending conversions.

This change is simple enough to be compatible with existing
code that can just define the new pointer in the callback
and ignore it.

Sample usage:

http://tinyurl.com/s3c2410-ts-c (function stylus_adc_action).

Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/adc.h |  3 ++-
 arch/arm/plat-s3c24xx/adc.c          | 11 +++++++----
 2 files changed, 9 insertions(+), 5 deletions(-)

diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-s3c/include/plat/adc.h
index ef92e50ac0a..d847bd476b6 100644
--- a/arch/arm/plat-s3c/include/plat/adc.h
+++ b/arch/arm/plat-s3c/include/plat/adc.h
@@ -22,7 +22,8 @@ extern int s3c_adc_start(struct s3c_adc_client *client,
 extern struct s3c_adc_client *
 	s3c_adc_register(struct platform_device *pdev,
 			 void (*select)(unsigned selected),
-			 void (*conv)(unsigned d0, unsigned d1),
+			 void (*conv)(unsigned d0, unsigned d1,
+				      unsigned *samples_left),
 			 unsigned int is_ts);
 
 extern void s3c_adc_release(struct s3c_adc_client *client);
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index 91adfa71c17..ee1baf11ad9 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -45,7 +45,8 @@ struct s3c_adc_client {
 	unsigned char		 channel;
 
 	void	(*select_cb)(unsigned selected);
-	void	(*convert_cb)(unsigned val1, unsigned val2);
+	void	(*convert_cb)(unsigned val1, unsigned val2,
+			      unsigned *samples_left);
 };
 
 struct adc_device {
@@ -158,7 +159,8 @@ static void s3c_adc_default_select(unsigned select)
 
 struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
 					void (*select)(unsigned int selected),
-					void (*conv)(unsigned d0, unsigned d1),
+					void (*conv)(unsigned d0, unsigned d1,
+						     unsigned *samples_left),
 					unsigned int is_ts)
 {
 	struct s3c_adc_client *client;
@@ -227,9 +229,10 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
 	data1 = readl(adc->regs + S3C2410_ADCDAT1);
 	adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
 
-	(client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff);
+	client->nr_samples--;
+	(client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff, &client->nr_samples);
 
-	if (--client->nr_samples > 0) {
+	if (client->nr_samples > 0) {
 		/* fire another conversion for this */
 
 		client->select_cb(1);
-- 
cgit v1.2.3


From ec7f4d5d67ef63c724ab6d4bdc7d2ffa8861071a Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Wed, 13 May 2009 22:20:35 +0100
Subject: [ARM] S3C24XX: GPIO: Remove s3c2410_gpio_irq2pin() call

Remove the s3c2410_gpio_irq2pin() function as it is not being
used in any in kernel driver and the function is probably not
being used anywhere else.

This is also part of the effort to remove any of the s3c24xx gpio
specific code that cannot be recreated by using the gpiolib
framework now in the kernel.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/hardware.h | 11 -----------
 arch/arm/plat-s3c24xx/gpio.c                  | 16 ----------------
 2 files changed, 27 deletions(-)

diff --git a/arch/arm/mach-s3c2410/include/mach/hardware.h b/arch/arm/mach-s3c2410/include/mach/hardware.h
index 74d5a1a4024..d7745d85392 100644
--- a/arch/arm/mach-s3c2410/include/mach/hardware.h
+++ b/arch/arm/mach-s3c2410/include/mach/hardware.h
@@ -46,17 +46,6 @@ extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
 
 extern int s3c2410_gpio_getirq(unsigned int pin);
 
-/* s3c2410_gpio_irq2pin
- *
- * turn the given irq number into the corresponding GPIO number
- *
- * returns:
- *	< 0 = no pin
- *	>=0 = gpio pin number
-*/
-
-extern int s3c2410_gpio_irq2pin(unsigned int irq);
-
 #ifdef CONFIG_CPU_S3C2400
 
 extern int s3c2400_gpio_getirq(unsigned int pin);
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
index 4a899c279eb..65ebbaff7d5 100644
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -199,19 +199,3 @@ int s3c2410_gpio_getirq(unsigned int pin)
 }
 
 EXPORT_SYMBOL(s3c2410_gpio_getirq);
-
-int s3c2410_gpio_irq2pin(unsigned int irq)
-{
-	if (irq >= IRQ_EINT0 && irq <= IRQ_EINT3)
-		return S3C2410_GPF0 + (irq - IRQ_EINT0);
-
-	if (irq >= IRQ_EINT4 && irq <= IRQ_EINT7)
-		return S3C2410_GPF4 + (irq - IRQ_EINT4);
-
-	if (irq >= IRQ_EINT8 && irq <= IRQ_EINT23)
-		return S3C2410_GPG0 + (irq - IRQ_EINT8);
-
-	return -EINVAL;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_irq2pin);
-- 
cgit v1.2.3


From 9f05f6a921353f4293cda37f221b9bfa532d3c57 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Wed, 13 May 2009 21:46:15 +0100
Subject: [ARM] S3C24XX: GPIO: Remove pin specific input and output defines

The use of S3C2410_GP[A-Z]x_INP and S3C2410_GP[A-Z]x_OUTP are
very rare and are taking up large amounts of space in the
regs-gpio.h header.

The GPIO layer has had generic input and out defines called
S3C2410_GPIO_INPUT and S3C2410_GPIO_OUTPUT for a while which work
for all S3C24XX GPIOs.

Do the following replacements:

   S3C2410_GP[A-Z][0-9]*_\OUTP => S3C2410_GPIO_OUTPUT
   S3C2410_GP[A-Z][0-9]*_\INP  => /S3C2410_GPIO_INPUT
   S3C2410_GPA[0-9]*_OUT       => S3C2410_GPIO_OUTPUT

to remove any usages of these and prepare the header for
the removal of these.

The following command was used to acheive this:

find . -type f -writable ! -name regs-gpio.h ! -name "*~" | xargs sed -i~ -e 's/S3C2410_GP[A-Z][0-9]*_\OUTP/S3C2410_GPIO_OUTPUT/g' -e 's/S3C2410_GP[A-Z][0-9]*_\INP/S3C2410_GPIO_INPUT/g' -e 's/S3C2410_GPA[0-9]*_OUT/S3C2410_GPIO_OUTPUT/g'

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/h1940-bluetooth.c | 2 +-
 arch/arm/mach-s3c2410/mach-amlm5900.c   | 2 +-
 arch/arm/mach-s3c2410/mach-bast.c       | 2 +-
 arch/arm/mach-s3c2410/mach-vr1000.c     | 2 +-
 arch/arm/mach-s3c2410/usb-simtec.c      | 2 +-
 arch/arm/mach-s3c2440/mach-nexcoder.c   | 8 ++++----
 arch/arm/mach-s3c2440/mach-osiris.c     | 2 +-
 arch/arm/plat-s3c24xx/common-smdk.c     | 8 ++++----
 8 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 5a6bc56f186..1f332b38f15 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -89,7 +89,7 @@ static int __init h1940bt_probe(struct platform_device *pdev)
 	/* Configures BT serial port GPIOs */
 	s3c2410_gpio_cfgpin(S3C2410_GPH0, S3C2410_GPH0_nCTS0);
 	s3c2410_gpio_pullup(S3C2410_GPH0, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_OUTP);
+	s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPIO_OUTPUT);
 	s3c2410_gpio_pullup(S3C2410_GPH1, 1);
 	s3c2410_gpio_cfgpin(S3C2410_GPH2, S3C2410_GPH2_TXD0);
 	s3c2410_gpio_pullup(S3C2410_GPH2, 1);
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 6d6995afeb4..79428ed789b 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -224,7 +224,7 @@ static void amlm5900_init_pm(void)
 	} else {
 		enable_irq_wake(IRQ_EINT9);
 		/* configure the suspend/resume status pin */
-		s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP);
+		s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT);
 		s3c2410_gpio_pullup(S3C2410_GPF2, 0);
 	}
 }
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 4389c160f7d..10ba91b7744 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -213,7 +213,7 @@ static int bast_pm_suspend(struct sys_device *sd, pm_message_t state)
 {
 	/* ensure that an nRESET is not generated on resume. */
 	s3c2410_gpio_setpin(S3C2410_GPA21, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPIO_OUTPUT);
 
 	return 0;
 }
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 61a1ea9c5c5..7e002f9473b 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -355,7 +355,7 @@ static struct clk *vr1000_clocks[] __initdata = {
 
 static void vr1000_power_off(void)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPB9, S3C2410_GPB9_OUTP);
+	s3c2410_gpio_cfgpin(S3C2410_GPB9, S3C2410_GPIO_OUTPUT);
 	s3c2410_gpio_setpin(S3C2410_GPB9, 1);
 }
 
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 8331e8d97e2..b209749b78e 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -109,7 +109,7 @@ int usb_simtec_init(void)
 	printk("USB Power Control, (c) 2004 Simtec Electronics\n");
 	s3c_device_usb.dev.platform_data = &usb_simtec_info;
 
-	s3c2410_gpio_cfgpin(S3C2410_GPB4, S3C2410_GPB4_OUTP);
+	s3c2410_gpio_cfgpin(S3C2410_GPB4, S3C2410_GPIO_OUTPUT);
 	s3c2410_gpio_setpin(S3C2410_GPB4, 1);
 	return 0;
 }
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 7aeaa972d7f..3d4c61e1fa4 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -121,15 +121,15 @@ static void __init nexcoder_sensorboard_init(void)
 {
 	// Initialize SCCB bus
 	s3c2410_gpio_setpin(S3C2410_GPE14, 1); // IICSCL
-	s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_OUTP);
+	s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPIO_OUTPUT);
 	s3c2410_gpio_setpin(S3C2410_GPE15, 1); // IICSDA
-	s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_OUTP);
+	s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPIO_OUTPUT);
 
 	// Power up the sensor board
 	s3c2410_gpio_setpin(S3C2410_GPF1, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPF1, S3C2410_GPF1_OUTP); // CAM_GPIO7 => nLDO_PWRDN
+	s3c2410_gpio_cfgpin(S3C2410_GPF1, S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
 	s3c2410_gpio_setpin(S3C2410_GPF2, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP); // CAM_GPIO6 => CAM_PWRDN
+	s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
 }
 
 static void __init nexcoder_map_io(void)
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index c8a46685ce3..e05f9557ed5 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -292,7 +292,7 @@ static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
 
 	/* ensure that an nRESET is not generated on resume. */
 	s3c2410_gpio_setpin(S3C2410_GPA21, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPIO_OUTPUT);
 
 	return 0;
 }
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index 1a8347cec20..ef4c8fde169 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -184,10 +184,10 @@ void __init smdk_machine_init(void)
 {
 	/* Configure the LEDs (even if we have no LED support)*/
 
-	s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPF4_OUTP);
-	s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPF5_OUTP);
-	s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPF6_OUTP);
-	s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPF7_OUTP);
+	s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPIO_OUTPUT);
 
 	s3c2410_gpio_setpin(S3C2410_GPF4, 1);
 	s3c2410_gpio_setpin(S3C2410_GPF5, 1);
-- 
cgit v1.2.3


From 3cba5ef862bc2c2a0cf2841d993bfb99b9a6c476 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sun, 17 May 2009 23:30:45 +0100
Subject: [ARM] S3C: Move watchdog system reset to own file.

Move the watchdog reset code from <mach/system-reset.h> to
a new file <plat/watchdog-reset.h> as this code is needed
by both s3c2410, s3c64xx and soon-to-be added s3c24a0.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/system-reset.h | 36 +----------------
 arch/arm/plat-s3c/include/plat/watchdog-reset.h   | 48 +++++++++++++++++++++++
 2 files changed, 50 insertions(+), 34 deletions(-)
 create mode 100644 arch/arm/plat-s3c/include/plat/watchdog-reset.h

diff --git a/arch/arm/mach-s3c2410/include/mach/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h
index b8687f71c30..6faadcee772 100644
--- a/arch/arm/mach-s3c2410/include/mach/system-reset.h
+++ b/arch/arm/mach-s3c2410/include/mach/system-reset.h
@@ -11,21 +11,13 @@
 */
 
 #include <mach/hardware.h>
-#include <linux/io.h>
-
-#include <plat/regs-watchdog.h>
-#include <mach/regs-clock.h>
-
-#include <linux/clk.h>
-#include <linux/err.h>
+#include <plat/watchdog-reset.h>
 
 extern void (*s3c24xx_reset_hook)(void);
 
 static void
 arch_reset(char mode, const char *cmd)
 {
-	struct clk *wdtclk;
-
 	if (mode == 's') {
 		cpu_reset(0);
 	}
@@ -33,31 +25,7 @@ arch_reset(char mode, const char *cmd)
 	if (s3c24xx_reset_hook)
 		s3c24xx_reset_hook();
 
-	printk("arch_reset: attempting watchdog reset\n");
-
-	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
-
-	wdtclk = clk_get(NULL, "watchdog");
-	if (!IS_ERR(wdtclk)) {
-		clk_enable(wdtclk);
-	} else
-		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
-
-	/* put initial values into count and data */
-	__raw_writel(0x80, S3C2410_WTCNT);
-	__raw_writel(0x80, S3C2410_WTDAT);
-
-	/* set the watchdog to go and reset... */
-	__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
-		     S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
-
-	/* wait for reset to assert... */
-	mdelay(500);
-
-	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
-
-	/* delay to allow the serial port to show the message */
-	mdelay(50);
+	arch_wdt_reset();
 
 	/* we'll take a jump through zero as a poor second */
 	cpu_reset(0);
diff --git a/arch/arm/plat-s3c/include/plat/watchdog-reset.h b/arch/arm/plat-s3c/include/plat/watchdog-reset.h
new file mode 100644
index 00000000000..277506aa0d5
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/watchdog-reset.h
@@ -0,0 +1,48 @@
+/* arch/arm/plat-s3c/include/plat/watchdog-reset.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - System define for arch_reset() function
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/regs-watchdog.h>
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+static inline void arch_wdt_reset(void)
+{
+	struct clk *wdtclk;
+
+	printk("arch_reset: attempting watchdog reset\n");
+
+	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
+
+	wdtclk = clk_get(NULL, "watchdog");
+	if (!IS_ERR(wdtclk)) {
+		clk_enable(wdtclk);
+	} else
+		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+
+	/* put initial values into count and data */
+	__raw_writel(0x80, S3C2410_WTCNT);
+	__raw_writel(0x80, S3C2410_WTDAT);
+
+	/* set the watchdog to go and reset... */
+	__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
+		     S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
+
+	/* wait for reset to assert... */
+	mdelay(500);
+
+	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
+
+	/* delay to allow the serial port to show the message */
+	mdelay(50);
+}
-- 
cgit v1.2.3


From 543899f610799426babb5313682fd9c249e34677 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sun, 17 May 2009 23:40:30 +0100
Subject: [ARM] S3C64XX: Use common watchdog reset for system reset.

Use the newly moved <plat/watchdog-reset.h> to perform the
arch_reset() call which has been unimplemented for a while.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6400/include/mach/map.h        | 1 +
 arch/arm/mach-s3c6400/include/mach/system.h     | 8 +++++++-
 arch/arm/plat-s3c/include/plat/watchdog-reset.h | 1 +
 arch/arm/plat-s3c64xx/cpu.c                     | 5 +++++
 4 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 99d5e3b420a..7a1e5a2455b 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -40,6 +40,7 @@
 
 #define S3C64XX_PA_FB		(0x77100000)
 #define S3C64XX_PA_USB_HSOTG	(0x7C000000)
+#define S3C64XX_PA_WATCHDOG	(0x7E004000)
 #define S3C64XX_PA_SYSCON	(0x7E00F000)
 #define S3C64XX_PA_TIMER	(0x7F006000)
 #define S3C64XX_PA_IIC0		(0x7F004000)
diff --git a/arch/arm/mach-s3c6400/include/mach/system.h b/arch/arm/mach-s3c6400/include/mach/system.h
index 090cfd969bc..2e58cb7a714 100644
--- a/arch/arm/mach-s3c6400/include/mach/system.h
+++ b/arch/arm/mach-s3c6400/include/mach/system.h
@@ -11,6 +11,8 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
+#include <plat/watchdog-reset.h>
+
 static void arch_idle(void)
 {
 	/* nothing here yet */
@@ -18,7 +20,11 @@ static void arch_idle(void)
 
 static void arch_reset(char mode, const char *cmd)
 {
-	/* nothing here yet */
+	if (mode != 's')
+		arch_wdt_reset();
+
+	/* if all else fails, or mode was for soft, jump to 0 */
+	cpu_reset(0);
 }
 
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/plat-s3c/include/plat/watchdog-reset.h b/arch/arm/plat-s3c/include/plat/watchdog-reset.h
index 277506aa0d5..54b762acb5a 100644
--- a/arch/arm/plat-s3c/include/plat/watchdog-reset.h
+++ b/arch/arm/plat-s3c/include/plat/watchdog-reset.h
@@ -11,6 +11,7 @@
 */
 
 #include <plat/regs-watchdog.h>
+#include <mach/map.h>
 
 #include <linux/clk.h>
 #include <linux/err.h>
diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/plat-s3c64xx/cpu.c
index 19f68b5f0d3..b1fdd83940a 100644
--- a/arch/arm/plat-s3c64xx/cpu.c
+++ b/arch/arm/plat-s3c64xx/cpu.c
@@ -102,6 +102,11 @@ static struct map_desc s3c_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(S3C64XX_PA_MODEM),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_WATCHDOG),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
 	},
 };
 
-- 
cgit v1.2.3


From ec976d6eb021dc8f2994248c310a41540f4756bd Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Wed, 13 May 2009 22:52:24 +0100
Subject: [ARM] S3C24XX: GPIO: Move gpio functions out of <mach/hardware.h>

Move all the gpio functions out of <mach/hardware.h> as
this file is for defining the generic IO base addresses
for the kernel IO calls.

Make a new header <mach/gpio-fns.h> to take this and
include it via the chain from <linux/gpio.h> which is
what most of these files should be using (and will be
changed as soon as possible).

Note, this does make minor changes to some drivers but
should not mess up any pending merges.

CC: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/h1940-bluetooth.c       |   2 +
 arch/arm/mach-s3c2410/include/mach/gpio-fns.h | 103 ++++++++++++++++++++++++++
 arch/arm/mach-s3c2410/include/mach/gpio.h     |   1 +
 arch/arm/mach-s3c2410/include/mach/hardware.h |  84 ---------------------
 arch/arm/mach-s3c2410/mach-amlm5900.c         |   1 +
 arch/arm/mach-s3c2410/mach-bast.c             |   1 +
 arch/arm/mach-s3c2410/mach-n30.c              |   1 +
 arch/arm/mach-s3c2410/mach-qt2410.c           |   1 +
 arch/arm/mach-s3c2410/mach-vr1000.c           |   1 +
 arch/arm/mach-s3c2410/pm.c                    |   1 +
 arch/arm/mach-s3c2410/usb-simtec.c            |   1 +
 arch/arm/mach-s3c2412/mach-jive.c             |   1 +
 arch/arm/mach-s3c2412/mach-smdk2413.c         |   1 +
 arch/arm/mach-s3c2440/mach-anubis.c           |   1 +
 arch/arm/mach-s3c2440/mach-nexcoder.c         |   1 +
 arch/arm/mach-s3c2440/mach-osiris.c           |   1 +
 arch/arm/plat-s3c24xx/common-smdk.c           |   1 +
 arch/arm/plat-s3c24xx/pm.c                    |   1 +
 arch/arm/plat-s3c24xx/setup-i2c.c             |   1 +
 drivers/leds/leds-h1940.c                     |   2 +
 drivers/leds/leds-s3c24xx.c                   |   1 +
 drivers/mmc/host/s3cmci.c                     |   3 +-
 drivers/spi/spi_s3c24xx_gpio.c                |   1 +
 sound/soc/s3c24xx/s3c2412-i2s.c               |   1 +
 sound/soc/s3c24xx/s3c2443-ac97.c              |   1 +
 sound/soc/s3c24xx/s3c24xx-i2s.c               |   2 +
 26 files changed, 131 insertions(+), 85 deletions(-)
 create mode 100644 arch/arm/mach-s3c2410/include/mach/gpio-fns.h

diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 1f332b38f15..9bbea8a73dd 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -16,6 +16,8 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/leds.h>
+#include <linux/gpio.h>
+
 #include <mach/regs-gpio.h>
 #include <mach/hardware.h>
 #include <mach/h1940-latch.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
new file mode 100644
index 00000000000..b4f39558bed
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
@@ -0,0 +1,103 @@
+/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+ *
+ * Copyright (c) 2003,2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - hardware
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* These functions are in the to-be-removed category and it is strongly
+ * encouraged not to use these in new code. They will be marked deprecated
+ * very soon.
+ *
+ * Most of the functionality can be either replaced by the gpiocfg calls
+ * for the s3c platform or by the generic GPIOlib API.
+*/
+
+/* external functions for GPIO support
+ *
+ * These allow various different clients to access the same GPIO
+ * registers without conflicting. If your driver only owns the entire
+ * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
+*/
+
+/* s3c2410_gpio_cfgpin
+ *
+ * set the configuration of the given pin to the value passed.
+ *
+ * eg:
+ *    s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
+ *    s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
+*/
+
+extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
+
+extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
+
+/* s3c2410_gpio_getirq
+ *
+ * turn the given pin number into the corresponding IRQ number
+ *
+ * returns:
+ *	< 0 = no interrupt for this pin
+ *	>=0 = interrupt number for the pin
+*/
+
+extern int s3c2410_gpio_getirq(unsigned int pin);
+
+#ifdef CONFIG_CPU_S3C2400
+
+extern int s3c2400_gpio_getirq(unsigned int pin);
+
+#endif /* CONFIG_CPU_S3C2400 */
+
+/* s3c2410_gpio_irqfilter
+ *
+ * set the irq filtering on the given pin
+ *
+ * on = 0 => disable filtering
+ *      1 => enable filtering
+ *
+ * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
+ *          width of filter (0 through 63)
+ *
+ *
+*/
+
+extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
+				  unsigned int config);
+
+/* s3c2410_gpio_pullup
+ *
+ * configure the pull-up control on the given pin
+ *
+ * to = 1 => disable the pull-up
+ *      0 => enable the pull-up
+ *
+ * eg;
+ *
+ *   s3c2410_gpio_pullup(S3C2410_GPB0, 0);
+ *   s3c2410_gpio_pullup(S3C2410_GPE8, 0);
+*/
+
+extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
+
+/* s3c2410_gpio_getpull
+ *
+ * Read the state of the pull-up on a given pin
+ *
+ * return:
+ *	< 0 => error code
+ *	  0 => enabled
+ *	  1 => disabled
+*/
+
+extern int s3c2410_gpio_getpull(unsigned int pin);
+
+extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
+
+extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
index 51a88cf9526..15f0b3e7ce6 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -24,5 +24,6 @@
 
 #include <asm-generic/gpio.h>
 #include <mach/gpio-nrs.h>
+#include <mach/gpio-fns.h>
 
 #define S3C_GPIO_END	(S3C2410_GPIO_BANKH + 32)
diff --git a/arch/arm/mach-s3c2410/include/mach/hardware.h b/arch/arm/mach-s3c2410/include/mach/hardware.h
index d7745d85392..aef5631eac5 100644
--- a/arch/arm/mach-s3c2410/include/mach/hardware.h
+++ b/arch/arm/mach-s3c2410/include/mach/hardware.h
@@ -15,90 +15,6 @@
 
 #ifndef __ASSEMBLY__
 
-/* external functions for GPIO support
- *
- * These allow various different clients to access the same GPIO
- * registers without conflicting. If your driver only owns the entire
- * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
-*/
-
-/* s3c2410_gpio_cfgpin
- *
- * set the configuration of the given pin to the value passed.
- *
- * eg:
- *    s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
- *    s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
-*/
-
-extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
-
-extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
-
-/* s3c2410_gpio_getirq
- *
- * turn the given pin number into the corresponding IRQ number
- *
- * returns:
- *	< 0 = no interrupt for this pin
- *	>=0 = interrupt number for the pin
-*/
-
-extern int s3c2410_gpio_getirq(unsigned int pin);
-
-#ifdef CONFIG_CPU_S3C2400
-
-extern int s3c2400_gpio_getirq(unsigned int pin);
-
-#endif /* CONFIG_CPU_S3C2400 */
-
-/* s3c2410_gpio_irqfilter
- *
- * set the irq filtering on the given pin
- *
- * on = 0 => disable filtering
- *      1 => enable filtering
- *
- * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
- *          width of filter (0 through 63)
- *
- *
-*/
-
-extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
-				  unsigned int config);
-
-/* s3c2410_gpio_pullup
- *
- * configure the pull-up control on the given pin
- *
- * to = 1 => disable the pull-up
- *      0 => enable the pull-up
- *
- * eg;
- *
- *   s3c2410_gpio_pullup(S3C2410_GPB0, 0);
- *   s3c2410_gpio_pullup(S3C2410_GPE8, 0);
-*/
-
-extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
-/* s3c2410_gpio_getpull
- *
- * Read the state of the pull-up on a given pin
- *
- * return:
- *	< 0 => error code
- *	  0 => enabled
- *	  1 => disabled
-*/
-
-extern int s3c2410_gpio_getpull(unsigned int pin);
-
-extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
-
-extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
-
 extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
 
 #ifdef CONFIG_CPU_S3C2440
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 79428ed789b..43f7536c529 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -32,6 +32,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/proc_fs.h>
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 10ba91b7744..3410caefb86 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 2b83f870771..83705036ca6 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -19,6 +19,7 @@
 
 #include <linux/gpio_keys.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 9f1ba9b63f7..7520aee3c9e 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -27,6 +27,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/sysdev.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 7e002f9473b..0507a7ec18c 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -18,6 +18,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/dm9000.h>
 #include <linux/i2c.h>
 
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 87fc481d92d..726cfc09388 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -25,6 +25,7 @@
 #include <linux/errno.h>
 #include <linux/time.h>
 #include <linux/sysdev.h>
+#include <linux/gpio.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index b209749b78e..506252b33fe 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -18,6 +18,7 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
+#include <linux/gpio.h>
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/device.h>
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 8f0d37d43b4..56d12b56c9d 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index eba66aa6bd2..753aaedae55 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -17,6 +17,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 9c6abf9fb54..d363b6f9000 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -15,6 +15,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 3d4c61e1fa4..4b2088cb05e 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -18,6 +18,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/string.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index e05f9557ed5..ad0fdc4a794 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -15,6 +15,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/device.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index ef4c8fde169..fe658c48f72 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -18,6 +18,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/sysdev.h>
 #include <linux/platform_device.h>
 
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 5135c40a1b9..16aaf36b6e5 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -30,6 +30,7 @@
 #include <linux/suspend.h>
 #include <linux/errno.h>
 #include <linux/time.h>
+#include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/serial_core.h>
 #include <linux/io.h>
diff --git a/arch/arm/plat-s3c24xx/setup-i2c.c b/arch/arm/plat-s3c24xx/setup-i2c.c
index d62b7e7fb35..e0d18530555 100644
--- a/arch/arm/plat-s3c24xx/setup-i2c.c
+++ b/arch/arm/plat-s3c24xx/setup-i2c.c
@@ -11,6 +11,7 @@
 */
 
 #include <linux/kernel.h>
+#include <linux/gpio.h>
 
 struct platform_device;
 
diff --git a/drivers/leds/leds-h1940.c b/drivers/leds/leds-h1940.c
index 1aa46a390a0..173d104d9ff 100644
--- a/drivers/leds/leds-h1940.c
+++ b/drivers/leds/leds-h1940.c
@@ -16,6 +16,8 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/leds.h>
+#include <linux/gpio.h>
+
 #include <mach/regs-gpio.h>
 #include <mach/hardware.h>
 #include <mach/h1940-latch.h>
diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c
index aa2e7ae0cda..aa7acf3b922 100644
--- a/drivers/leds/leds-s3c24xx.c
+++ b/drivers/leds/leds-s3c24xx.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 2db166b7096..2e7da8e853c 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -17,6 +17,7 @@
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
 #include <linux/cpufreq.h>
+#include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 
@@ -1121,7 +1122,7 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	case MMC_POWER_OFF:
 	default:
 		s3c2410_gpio_setpin(S3C2410_GPE5, 0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_OUTP);
+		s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPIO_OUTPUT);
 
 		if (host->is2440)
 			mci_con |= S3C2440_SDICON_SDRESET;
diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c
index f2447a5476b..bbf9371cd28 100644
--- a/drivers/spi/spi_s3c24xx_gpio.c
+++ b/drivers/spi/spi_s3c24xx_gpio.c
@@ -17,6 +17,7 @@
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/s3c24xx/s3c2412-i2s.c
index b7e0b3f0bfc..c35b74b2d1d 100644
--- a/sound/soc/s3c24xx/s3c2412-i2s.c
+++ b/sound/soc/s3c24xx/s3c2412-i2s.c
@@ -20,6 +20,7 @@
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
diff --git a/sound/soc/s3c24xx/s3c2443-ac97.c b/sound/soc/s3c24xx/s3c2443-ac97.c
index 3698f707c44..3f03d5ddfac 100644
--- a/sound/soc/s3c24xx/s3c2443-ac97.c
+++ b/sound/soc/s3c24xx/s3c2443-ac97.c
@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <linux/wait.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/clk.h>
 
 #include <sound/core.h>
diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c
index cc066964dad..556e35f0ab7 100644
--- a/sound/soc/s3c24xx/s3c24xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c24xx-i2s.c
@@ -21,6 +21,8 @@
 #include <linux/clk.h>
 #include <linux/jiffies.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
+
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
-- 
cgit v1.2.3


From 86c03c526e2b282846c09509a48ab8be68fe7168 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sun, 17 May 2009 22:47:07 +0100
Subject: [ARM] S3C24XX: Fix missing <linux/sysdev.h>

In our recent changes, arch/arm/plat-s3c24xx/gpiolib.c needs
to have <linux/sysdev.h> included for it to build.

This fixes the following error/warnings:

arch/arm/plat-s3c/include/plat/pm.h:104: error: expected declaration specifiers or '...' before 'pm_message_t'
arch/arm/plat-s3c/include/plat/pm.h:104: warning: 'struct sys_device' declared inside parameter list
arch/arm/plat-s3c/include/plat/pm.h:104: warning: its scope is only this definition or declaration, which is probably not what you want
arch/arm/plat-s3c/include/plat/pm.h:105: warning: 'struct sys_device' declared inside parameter list

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/gpiolib.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 4bac12dc073..3cbec6d3f38 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
+#include <linux/sysdev.h>
 #include <linux/ioport.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
-- 
cgit v1.2.3


From 9c7099ca7519268f6ec79782bc06faa27a714d95 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sun, 17 May 2009 22:08:32 +0100
Subject: [ARM] S3C24XX: GPIO: Clean out unused definitions in
 <mach/regs-gpio.h>

The <mach/regs-gpio.h> really does not need the input and output
pin configurations as these are standard and have a generic
representation (plus the s3c24xx gpio specific code is going to
be phased out soon).

The following sed was applied to remove the lines:

    sed -i~ -e '/S3C2410_GP[A-Z][0-9]*_\INP/d' \
	    -e '/S3C2410_GP[A-Z][0-9]*_\OUTP/d' \
	    -e '/S3C2410_GPA[0-9]*_OUT/d'

to remove these.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/regs-gpio.h | 211 -------------------------
 1 file changed, 211 deletions(-)

diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index 35a03df473f..90cefebd293 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -70,103 +70,80 @@
 #define S3C2400_GPADAT	   S3C2410_GPIOREG(0x04)
 
 #define S3C2410_GPA0         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
-#define S3C2410_GPA0_OUT     (0<<0)
 #define S3C2410_GPA0_ADDR0   (1<<0)
 
 #define S3C2410_GPA1         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
-#define S3C2410_GPA1_OUT     (0<<1)
 #define S3C2410_GPA1_ADDR16  (1<<1)
 
 #define S3C2410_GPA2         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
-#define S3C2410_GPA2_OUT     (0<<2)
 #define S3C2410_GPA2_ADDR17  (1<<2)
 
 #define S3C2410_GPA3         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
-#define S3C2410_GPA3_OUT     (0<<3)
 #define S3C2410_GPA3_ADDR18  (1<<3)
 
 #define S3C2410_GPA4         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
-#define S3C2410_GPA4_OUT     (0<<4)
 #define S3C2410_GPA4_ADDR19  (1<<4)
 
 #define S3C2410_GPA5         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
-#define S3C2410_GPA5_OUT     (0<<5)
 #define S3C2410_GPA5_ADDR20  (1<<5)
 
 #define S3C2410_GPA6         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
-#define S3C2410_GPA6_OUT     (0<<6)
 #define S3C2410_GPA6_ADDR21  (1<<6)
 
 #define S3C2410_GPA7         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
-#define S3C2410_GPA7_OUT     (0<<7)
 #define S3C2410_GPA7_ADDR22  (1<<7)
 
 #define S3C2410_GPA8         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
-#define S3C2410_GPA8_OUT     (0<<8)
 #define S3C2410_GPA8_ADDR23  (1<<8)
 
 #define S3C2410_GPA9         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
-#define S3C2410_GPA9_OUT     (0<<9)
 #define S3C2410_GPA9_ADDR24  (1<<9)
 
 #define S3C2410_GPA10        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
-#define S3C2410_GPA10_OUT    (0<<10)
 #define S3C2410_GPA10_ADDR25 (1<<10)
 #define S3C2400_GPA10_SCKE   (1<<10)
 
 #define S3C2410_GPA11        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
-#define S3C2410_GPA11_OUT    (0<<11)
 #define S3C2410_GPA11_ADDR26 (1<<11)
 #define S3C2400_GPA11_nCAS0  (1<<11)
 
 #define S3C2410_GPA12        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
-#define S3C2410_GPA12_OUT    (0<<12)
 #define S3C2410_GPA12_nGCS1  (1<<12)
 #define S3C2400_GPA12_nCAS1  (1<<12)
 
 #define S3C2410_GPA13        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
-#define S3C2410_GPA13_OUT    (0<<13)
 #define S3C2410_GPA13_nGCS2  (1<<13)
 #define S3C2400_GPA13_nGCS1  (1<<13)
 
 #define S3C2410_GPA14        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
-#define S3C2410_GPA14_OUT    (0<<14)
 #define S3C2410_GPA14_nGCS3  (1<<14)
 #define S3C2400_GPA14_nGCS2  (1<<14)
 
 #define S3C2410_GPA15        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
-#define S3C2410_GPA15_OUT    (0<<15)
 #define S3C2410_GPA15_nGCS4  (1<<15)
 #define S3C2400_GPA15_nGCS3  (1<<15)
 
 #define S3C2410_GPA16        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
-#define S3C2410_GPA16_OUT    (0<<16)
 #define S3C2410_GPA16_nGCS5  (1<<16)
 #define S3C2400_GPA16_nGCS4  (1<<16)
 
 #define S3C2410_GPA17        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
-#define S3C2410_GPA17_OUT    (0<<17)
 #define S3C2410_GPA17_CLE    (1<<17)
 #define S3C2400_GPA17_nGCS5  (1<<17)
 
 #define S3C2410_GPA18        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
-#define S3C2410_GPA18_OUT    (0<<18)
 #define S3C2410_GPA18_ALE    (1<<18)
 
 #define S3C2410_GPA19        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
-#define S3C2410_GPA19_OUT    (0<<19)
 #define S3C2410_GPA19_nFWE   (1<<19)
 
 #define S3C2410_GPA20        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
-#define S3C2410_GPA20_OUT    (0<<20)
 #define S3C2410_GPA20_nFRE   (1<<20)
 
 #define S3C2410_GPA21        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
-#define S3C2410_GPA21_OUT    (0<<21)
 #define S3C2410_GPA21_nRSTOUT (1<<21)
 
 #define S3C2410_GPA22        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
-#define S3C2410_GPA22_OUT    (0<<22)
 #define S3C2410_GPA22_nFCE   (1<<22)
 
 /* 0x08 and 0x0c are reserved on S3C2410 */
@@ -195,34 +172,24 @@
 /* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
 
 #define S3C2410_GPB0         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
-#define S3C2410_GPB0_INP     (0x00 << 0)
-#define S3C2410_GPB0_OUTP    (0x01 << 0)
 #define S3C2410_GPB0_TOUT0   (0x02 << 0)
 #define S3C2400_GPB0_DATA16  (0x02 << 0)
 
 #define S3C2410_GPB1         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
-#define S3C2410_GPB1_INP     (0x00 << 2)
-#define S3C2410_GPB1_OUTP    (0x01 << 2)
 #define S3C2410_GPB1_TOUT1   (0x02 << 2)
 #define S3C2400_GPB1_DATA17  (0x02 << 2)
 
 #define S3C2410_GPB2         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
-#define S3C2410_GPB2_INP     (0x00 << 4)
-#define S3C2410_GPB2_OUTP    (0x01 << 4)
 #define S3C2410_GPB2_TOUT2   (0x02 << 4)
 #define S3C2400_GPB2_DATA18  (0x02 << 4)
 #define S3C2400_GPB2_TCLK1   (0x03 << 4)
 
 #define S3C2410_GPB3         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
-#define S3C2410_GPB3_INP     (0x00 << 6)
-#define S3C2410_GPB3_OUTP    (0x01 << 6)
 #define S3C2410_GPB3_TOUT3   (0x02 << 6)
 #define S3C2400_GPB3_DATA19  (0x02 << 6)
 #define S3C2400_GPB3_TXD1    (0x03 << 6)
 
 #define S3C2410_GPB4         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
-#define S3C2410_GPB4_INP     (0x00 << 8)
-#define S3C2410_GPB4_OUTP    (0x01 << 8)
 #define S3C2410_GPB4_TCLK0   (0x02 << 8)
 #define S3C2400_GPB4_DATA20  (0x02 << 8)
 #define S3C2410_GPB4_MASK    (0x03 << 8)
@@ -230,45 +197,33 @@
 #define S3C2400_GPB4_MASK    (0x03 << 8)
 
 #define S3C2410_GPB5         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
-#define S3C2410_GPB5_INP     (0x00 << 10)
-#define S3C2410_GPB5_OUTP    (0x01 << 10)
 #define S3C2410_GPB5_nXBACK  (0x02 << 10)
 #define S3C2443_GPB5_XBACK   (0x03 << 10)
 #define S3C2400_GPB5_DATA21  (0x02 << 10)
 #define S3C2400_GPB5_nCTS1   (0x03 << 10)
 
 #define S3C2410_GPB6         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
-#define S3C2410_GPB6_INP     (0x00 << 12)
-#define S3C2410_GPB6_OUTP    (0x01 << 12)
 #define S3C2410_GPB6_nXBREQ  (0x02 << 12)
 #define S3C2443_GPB6_XBREQ   (0x03 << 12)
 #define S3C2400_GPB6_DATA22  (0x02 << 12)
 #define S3C2400_GPB6_nRTS1   (0x03 << 12)
 
 #define S3C2410_GPB7         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
-#define S3C2410_GPB7_INP     (0x00 << 14)
-#define S3C2410_GPB7_OUTP    (0x01 << 14)
 #define S3C2410_GPB7_nXDACK1 (0x02 << 14)
 #define S3C2443_GPB7_XDACK1  (0x03 << 14)
 #define S3C2400_GPB7_DATA23  (0x02 << 14)
 
 #define S3C2410_GPB8         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
-#define S3C2410_GPB8_INP     (0x00 << 16)
-#define S3C2410_GPB8_OUTP    (0x01 << 16)
 #define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
 #define S3C2400_GPB8_DATA24  (0x02 << 16)
 
 #define S3C2410_GPB9         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
-#define S3C2410_GPB9_INP     (0x00 << 18)
-#define S3C2410_GPB9_OUTP    (0x01 << 18)
 #define S3C2410_GPB9_nXDACK0 (0x02 << 18)
 #define S3C2443_GPB9_XDACK0  (0x03 << 18)
 #define S3C2400_GPB9_DATA25  (0x02 << 18)
 #define S3C2400_GPB9_I2SSDI  (0x03 << 18)
 
 #define S3C2410_GPB10        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
-#define S3C2410_GPB10_INP    (0x00 << 20)
-#define S3C2410_GPB10_OUTP   (0x01 << 20)
 #define S3C2410_GPB10_nXDRE0 (0x02 << 20)
 #define S3C2443_GPB10_XDREQ0 (0x03 << 20)
 #define S3C2400_GPB10_DATA26 (0x02 << 20)
@@ -316,98 +271,66 @@
 #define S3C2400_GPCUP	   S3C2410_GPIOREG(0x1C)
 
 #define S3C2410_GPC0            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
-#define S3C2410_GPC0_INP	(0x00 << 0)
-#define S3C2410_GPC0_OUTP	(0x01 << 0)
 #define S3C2410_GPC0_LEND	(0x02 << 0)
 #define S3C2400_GPC0_VD0 	(0x02 << 0)
 
 #define S3C2410_GPC1            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
-#define S3C2410_GPC1_INP	(0x00 << 2)
-#define S3C2410_GPC1_OUTP	(0x01 << 2)
 #define S3C2410_GPC1_VCLK	(0x02 << 2)
 #define S3C2400_GPC1_VD1 	(0x02 << 2)
 
 #define S3C2410_GPC2            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
-#define S3C2410_GPC2_INP	(0x00 << 4)
-#define S3C2410_GPC2_OUTP	(0x01 << 4)
 #define S3C2410_GPC2_VLINE	(0x02 << 4)
 #define S3C2400_GPC2_VD2  	(0x02 << 4)
 
 #define S3C2410_GPC3            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
-#define S3C2410_GPC3_INP	(0x00 << 6)
-#define S3C2410_GPC3_OUTP	(0x01 << 6)
 #define S3C2410_GPC3_VFRAME	(0x02 << 6)
 #define S3C2400_GPC3_VD3   	(0x02 << 6)
 
 #define S3C2410_GPC4            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
-#define S3C2410_GPC4_INP	(0x00 << 8)
-#define S3C2410_GPC4_OUTP	(0x01 << 8)
 #define S3C2410_GPC4_VM		(0x02 << 8)
 #define S3C2400_GPC4_VD4	(0x02 << 8)
 
 #define S3C2410_GPC5            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
-#define S3C2410_GPC5_INP	(0x00 << 10)
-#define S3C2410_GPC5_OUTP	(0x01 << 10)
 #define S3C2410_GPC5_LCDVF0	(0x02 << 10)
 #define S3C2400_GPC5_VD5   	(0x02 << 10)
 
 #define S3C2410_GPC6            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
-#define S3C2410_GPC6_INP	(0x00 << 12)
-#define S3C2410_GPC6_OUTP	(0x01 << 12)
 #define S3C2410_GPC6_LCDVF1	(0x02 << 12)
 #define S3C2400_GPC6_VD6   	(0x02 << 12)
 
 #define S3C2410_GPC7            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
-#define S3C2410_GPC7_INP	(0x00 << 14)
-#define S3C2410_GPC7_OUTP	(0x01 << 14)
 #define S3C2410_GPC7_LCDVF2	(0x02 << 14)
 #define S3C2400_GPC7_VD7   	(0x02 << 14)
 
 #define S3C2410_GPC8            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
-#define S3C2410_GPC8_INP	(0x00 << 16)
-#define S3C2410_GPC8_OUTP	(0x01 << 16)
 #define S3C2410_GPC8_VD0	(0x02 << 16)
 #define S3C2400_GPC8_VD8	(0x02 << 16)
 
 #define S3C2410_GPC9            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
-#define S3C2410_GPC9_INP	(0x00 << 18)
-#define S3C2410_GPC9_OUTP	(0x01 << 18)
 #define S3C2410_GPC9_VD1	(0x02 << 18)
 #define S3C2400_GPC9_VD9	(0x02 << 18)
 
 #define S3C2410_GPC10           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
-#define S3C2410_GPC10_INP	(0x00 << 20)
-#define S3C2410_GPC10_OUTP	(0x01 << 20)
 #define S3C2410_GPC10_VD2	(0x02 << 20)
 #define S3C2400_GPC10_VD10	(0x02 << 20)
 
 #define S3C2410_GPC11           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
-#define S3C2410_GPC11_INP	(0x00 << 22)
-#define S3C2410_GPC11_OUTP	(0x01 << 22)
 #define S3C2410_GPC11_VD3	(0x02 << 22)
 #define S3C2400_GPC11_VD11	(0x02 << 22)
 
 #define S3C2410_GPC12           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
-#define S3C2410_GPC12_INP	(0x00 << 24)
-#define S3C2410_GPC12_OUTP	(0x01 << 24)
 #define S3C2410_GPC12_VD4	(0x02 << 24)
 #define S3C2400_GPC12_VD12	(0x02 << 24)
 
 #define S3C2410_GPC13           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
-#define S3C2410_GPC13_INP	(0x00 << 26)
-#define S3C2410_GPC13_OUTP	(0x01 << 26)
 #define S3C2410_GPC13_VD5	(0x02 << 26)
 #define S3C2400_GPC13_VD13	(0x02 << 26)
 
 #define S3C2410_GPC14           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
-#define S3C2410_GPC14_INP	(0x00 << 28)
-#define S3C2410_GPC14_OUTP	(0x01 << 28)
 #define S3C2410_GPC14_VD6	(0x02 << 28)
 #define S3C2400_GPC14_VD14	(0x02 << 28)
 
 #define S3C2410_GPC15           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
-#define S3C2410_GPC15_INP	(0x00 << 30)
-#define S3C2410_GPC15_OUTP	(0x01 << 30)
 #define S3C2410_GPC15_VD7	(0x02 << 30)
 #define S3C2400_GPC15_VD15	(0x02 << 30)
 
@@ -433,98 +356,66 @@
 #define S3C2400_GPDUP	   S3C2410_GPIOREG(0x28)
 
 #define S3C2410_GPD0            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
-#define S3C2410_GPD0_INP	(0x00 << 0)
-#define S3C2410_GPD0_OUTP	(0x01 << 0)
 #define S3C2410_GPD0_VD8	(0x02 << 0)
 #define S3C2400_GPD0_VFRAME	(0x02 << 0)
 #define S3C2442_GPD0_nSPICS1	(0x03 << 0)
 
 #define S3C2410_GPD1            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
-#define S3C2410_GPD1_INP	(0x00 << 2)
-#define S3C2410_GPD1_OUTP	(0x01 << 2)
 #define S3C2410_GPD1_VD9	(0x02 << 2)
 #define S3C2400_GPD1_VM		(0x02 << 2)
 #define S3C2442_GPD1_SPICLK1	(0x03 << 2)
 
 #define S3C2410_GPD2            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
-#define S3C2410_GPD2_INP	(0x00 << 4)
-#define S3C2410_GPD2_OUTP	(0x01 << 4)
 #define S3C2410_GPD2_VD10	(0x02 << 4)
 #define S3C2400_GPD2_VLINE	(0x02 << 4)
 
 #define S3C2410_GPD3            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
-#define S3C2410_GPD3_INP	(0x00 << 6)
-#define S3C2410_GPD3_OUTP	(0x01 << 6)
 #define S3C2410_GPD3_VD11	(0x02 << 6)
 #define S3C2400_GPD3_VCLK	(0x02 << 6)
 
 #define S3C2410_GPD4            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
-#define S3C2410_GPD4_INP	(0x00 << 8)
-#define S3C2410_GPD4_OUTP	(0x01 << 8)
 #define S3C2410_GPD4_VD12	(0x02 << 8)
 #define S3C2400_GPD4_LEND	(0x02 << 8)
 
 #define S3C2410_GPD5            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
-#define S3C2410_GPD5_INP	(0x00 << 10)
-#define S3C2410_GPD5_OUTP	(0x01 << 10)
 #define S3C2410_GPD5_VD13	(0x02 << 10)
 #define S3C2400_GPD5_TOUT0	(0x02 << 10)
 
 #define S3C2410_GPD6            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
-#define S3C2410_GPD6_INP	(0x00 << 12)
-#define S3C2410_GPD6_OUTP	(0x01 << 12)
 #define S3C2410_GPD6_VD14	(0x02 << 12)
 #define S3C2400_GPD6_TOUT1	(0x02 << 12)
 
 #define S3C2410_GPD7            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
-#define S3C2410_GPD7_INP	(0x00 << 14)
-#define S3C2410_GPD7_OUTP	(0x01 << 14)
 #define S3C2410_GPD7_VD15	(0x02 << 14)
 #define S3C2400_GPD7_TOUT2	(0x02 << 14)
 
 #define S3C2410_GPD8            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
-#define S3C2410_GPD8_INP	(0x00 << 16)
-#define S3C2410_GPD8_OUTP	(0x01 << 16)
 #define S3C2410_GPD8_VD16	(0x02 << 16)
 #define S3C2400_GPD8_TOUT3	(0x02 << 16)
 
 #define S3C2410_GPD9            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
-#define S3C2410_GPD9_INP	(0x00 << 18)
-#define S3C2410_GPD9_OUTP	(0x01 << 18)
 #define S3C2410_GPD9_VD17	(0x02 << 18)
 #define S3C2400_GPD9_TCLK0	(0x02 << 18)
 #define S3C2410_GPD9_MASK       (0x03 << 18)
 
 #define S3C2410_GPD10           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
-#define S3C2410_GPD10_INP	(0x00 << 20)
-#define S3C2410_GPD10_OUTP	(0x01 << 20)
 #define S3C2410_GPD10_VD18	(0x02 << 20)
 #define S3C2400_GPD10_nWAIT	(0x02 << 20)
 
 #define S3C2410_GPD11           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
-#define S3C2410_GPD11_INP	(0x00 << 22)
-#define S3C2410_GPD11_OUTP	(0x01 << 22)
 #define S3C2410_GPD11_VD19	(0x02 << 22)
 
 #define S3C2410_GPD12           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
-#define S3C2410_GPD12_INP	(0x00 << 24)
-#define S3C2410_GPD12_OUTP	(0x01 << 24)
 #define S3C2410_GPD12_VD20	(0x02 << 24)
 
 #define S3C2410_GPD13           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
-#define S3C2410_GPD13_INP	(0x00 << 26)
-#define S3C2410_GPD13_OUTP	(0x01 << 26)
 #define S3C2410_GPD13_VD21	(0x02 << 26)
 
 #define S3C2410_GPD14           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
-#define S3C2410_GPD14_INP	(0x00 << 28)
-#define S3C2410_GPD14_OUTP	(0x01 << 28)
 #define S3C2410_GPD14_VD22	(0x02 << 28)
 #define S3C2410_GPD14_nSS1	(0x03 << 28)
 
 #define S3C2410_GPD15           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
-#define S3C2410_GPD15_INP	(0x00 << 30)
-#define S3C2410_GPD15_OUTP	(0x01 << 30)
 #define S3C2410_GPD15_VD23	(0x02 << 30)
 #define S3C2410_GPD15_nSS0	(0x03 << 30)
 
@@ -551,16 +442,12 @@
 #define S3C2400_GPEUP	   S3C2410_GPIOREG(0x34)
 
 #define S3C2410_GPE0           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
-#define S3C2410_GPE0_INP       (0x00 << 0)
-#define S3C2410_GPE0_OUTP      (0x01 << 0)
 #define S3C2410_GPE0_I2SLRCK   (0x02 << 0)
 #define S3C2443_GPE0_AC_nRESET (0x03 << 0)
 #define S3C2400_GPE0_EINT0     (0x02 << 0)
 #define S3C2410_GPE0_MASK      (0x03 << 0)
 
 #define S3C2410_GPE1           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
-#define S3C2410_GPE1_INP       (0x00 << 2)
-#define S3C2410_GPE1_OUTP      (0x01 << 2)
 #define S3C2410_GPE1_I2SSCLK   (0x02 << 2)
 #define S3C2443_GPE1_AC_SYNC   (0x03 << 2)
 #define S3C2400_GPE1_EINT1     (0x02 << 2)
@@ -568,16 +455,12 @@
 #define S3C2410_GPE1_MASK      (0x03 << 2)
 
 #define S3C2410_GPE2           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
-#define S3C2410_GPE2_INP       (0x00 << 4)
-#define S3C2410_GPE2_OUTP      (0x01 << 4)
 #define S3C2410_GPE2_CDCLK     (0x02 << 4)
 #define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
 #define S3C2400_GPE2_EINT2     (0x02 << 4)
 #define S3C2400_GPE2_I2SSDI    (0x03 << 4)
 
 #define S3C2410_GPE3           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
-#define S3C2410_GPE3_INP       (0x00 << 6)
-#define S3C2410_GPE3_OUTP      (0x01 << 6)
 #define S3C2410_GPE3_I2SSDI    (0x02 << 6)
 #define S3C2443_GPE3_AC_SDI    (0x03 << 6)
 #define S3C2400_GPE3_EINT3     (0x02 << 6)
@@ -586,8 +469,6 @@
 #define S3C2410_GPE3_MASK      (0x03 << 6)
 
 #define S3C2410_GPE4           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
-#define S3C2410_GPE4_INP       (0x00 << 8)
-#define S3C2410_GPE4_OUTP      (0x01 << 8)
 #define S3C2410_GPE4_I2SSDO    (0x02 << 8)
 #define S3C2443_GPE4_AC_SDO    (0x03 << 8)
 #define S3C2400_GPE4_EINT4     (0x02 << 8)
@@ -596,40 +477,30 @@
 #define S3C2410_GPE4_MASK      (0x03 << 8)
 
 #define S3C2410_GPE5           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
-#define S3C2410_GPE5_INP       (0x00 << 10)
-#define S3C2410_GPE5_OUTP      (0x01 << 10)
 #define S3C2410_GPE5_SDCLK     (0x02 << 10)
 #define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
 #define S3C2400_GPE5_EINT5     (0x02 << 10)
 #define S3C2400_GPE5_TCLK1     (0x03 << 10)
 
 #define S3C2410_GPE6           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
-#define S3C2410_GPE6_INP       (0x00 << 12)
-#define S3C2410_GPE6_OUTP      (0x01 << 12)
 #define S3C2410_GPE6_SDCMD     (0x02 << 12)
 #define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
 #define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
 #define S3C2400_GPE6_EINT6     (0x02 << 12)
 
 #define S3C2410_GPE7           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
-#define S3C2410_GPE7_INP       (0x00 << 14)
-#define S3C2410_GPE7_OUTP      (0x01 << 14)
 #define S3C2410_GPE7_SDDAT0    (0x02 << 14)
 #define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
 #define S3C2443_GPE7_AC_SDI    (0x03 << 14)
 #define S3C2400_GPE7_EINT7     (0x02 << 14)
 
 #define S3C2410_GPE8           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
-#define S3C2410_GPE8_INP       (0x00 << 16)
-#define S3C2410_GPE8_OUTP      (0x01 << 16)
 #define S3C2410_GPE8_SDDAT1    (0x02 << 16)
 #define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
 #define S3C2443_GPE8_AC_SDO    (0x03 << 16)
 #define S3C2400_GPE8_nXDACK0   (0x02 << 16)
 
 #define S3C2410_GPE9           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
-#define S3C2410_GPE9_INP       (0x00 << 18)
-#define S3C2410_GPE9_OUTP      (0x01 << 18)
 #define S3C2410_GPE9_SDDAT2    (0x02 << 18)
 #define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
 #define S3C2443_GPE9_AC_SYNC   (0x03 << 18)
@@ -637,39 +508,27 @@
 #define S3C2400_GPE9_nXBACK    (0x03 << 18)
 
 #define S3C2410_GPE10          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
-#define S3C2410_GPE10_INP      (0x00 << 20)
-#define S3C2410_GPE10_OUTP     (0x01 << 20)
 #define S3C2410_GPE10_SDDAT3   (0x02 << 20)
 #define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
 #define S3C2443_GPE10_AC_nRESET (0x03 << 20)
 #define S3C2400_GPE10_nXDREQ0  (0x02 << 20)
 
 #define S3C2410_GPE11          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
-#define S3C2410_GPE11_INP      (0x00 << 22)
-#define S3C2410_GPE11_OUTP     (0x01 << 22)
 #define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
 #define S3C2400_GPE11_nXDREQ1  (0x02 << 22)
 #define S3C2400_GPE11_nXBREQ   (0x03 << 22)
 
 #define S3C2410_GPE12          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
-#define S3C2410_GPE12_INP      (0x00 << 24)
-#define S3C2410_GPE12_OUTP     (0x01 << 24)
 #define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
 
 #define S3C2410_GPE13          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
-#define S3C2410_GPE13_INP      (0x00 << 26)
-#define S3C2410_GPE13_OUTP     (0x01 << 26)
 #define S3C2410_GPE13_SPICLK0  (0x02 << 26)
 
 #define S3C2410_GPE14          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
-#define S3C2410_GPE14_INP      (0x00 << 28)
-#define S3C2410_GPE14_OUTP     (0x01 << 28)
 #define S3C2410_GPE14_IICSCL   (0x02 << 28)
 #define S3C2410_GPE14_MASK     (0x03 << 28)
 
 #define S3C2410_GPE15          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
-#define S3C2410_GPE15_INP      (0x00 << 30)
-#define S3C2410_GPE15_OUTP     (0x01 << 30)
 #define S3C2410_GPE15_IICSDA   (0x02 << 30)
 #define S3C2410_GPE15_MASK     (0x03 << 30)
 
@@ -706,54 +565,38 @@
 #define S3C2400_GPFUP	   S3C2410_GPIOREG(0x40)
 
 #define S3C2410_GPF0        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
-#define S3C2410_GPF0_INP    (0x00 << 0)
-#define S3C2410_GPF0_OUTP   (0x01 << 0)
 #define S3C2410_GPF0_EINT0  (0x02 << 0)
 #define S3C2400_GPF0_RXD0   (0x02 << 0)
 
 #define S3C2410_GPF1        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
-#define S3C2410_GPF1_INP    (0x00 << 2)
-#define S3C2410_GPF1_OUTP   (0x01 << 2)
 #define S3C2410_GPF1_EINT1  (0x02 << 2)
 #define S3C2400_GPF1_RXD1   (0x02 << 2)
 #define S3C2400_GPF1_IICSDA (0x03 << 2)
 
 #define S3C2410_GPF2        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
-#define S3C2410_GPF2_INP    (0x00 << 4)
-#define S3C2410_GPF2_OUTP   (0x01 << 4)
 #define S3C2410_GPF2_EINT2  (0x02 << 4)
 #define S3C2400_GPF2_TXD0   (0x02 << 4)
 
 #define S3C2410_GPF3        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
-#define S3C2410_GPF3_INP    (0x00 << 6)
-#define S3C2410_GPF3_OUTP   (0x01 << 6)
 #define S3C2410_GPF3_EINT3  (0x02 << 6)
 #define S3C2400_GPF3_TXD1   (0x02 << 6)
 #define S3C2400_GPF3_IICSCL (0x03 << 6)
 
 #define S3C2410_GPF4        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
-#define S3C2410_GPF4_INP    (0x00 << 8)
-#define S3C2410_GPF4_OUTP   (0x01 << 8)
 #define S3C2410_GPF4_EINT4  (0x02 << 8)
 #define S3C2400_GPF4_nRTS0  (0x02 << 8)
 #define S3C2400_GPF4_nXBACK (0x03 << 8)
 
 #define S3C2410_GPF5        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
-#define S3C2410_GPF5_INP    (0x00 << 10)
-#define S3C2410_GPF5_OUTP   (0x01 << 10)
 #define S3C2410_GPF5_EINT5  (0x02 << 10)
 #define S3C2400_GPF5_nCTS0  (0x02 << 10)
 #define S3C2400_GPF5_nXBREQ (0x03 << 10)
 
 #define S3C2410_GPF6        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
-#define S3C2410_GPF6_INP    (0x00 << 12)
-#define S3C2410_GPF6_OUTP   (0x01 << 12)
 #define S3C2410_GPF6_EINT6  (0x02 << 12)
 #define S3C2400_GPF6_CLKOUT (0x02 << 12)
 
 #define S3C2410_GPF7        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
-#define S3C2410_GPF7_INP    (0x00 << 14)
-#define S3C2410_GPF7_OUTP   (0x01 << 14)
 #define S3C2410_GPF7_EINT7  (0x02 << 14)
 
 #define S3C2410_GPF_PUPDIS(x)  (1<<(x))
@@ -779,35 +622,25 @@
 #define S3C2400_GPGUP	   S3C2410_GPIOREG(0x4C)
 
 #define S3C2410_GPG0          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
-#define S3C2410_GPG0_INP      (0x00 << 0)
-#define S3C2410_GPG0_OUTP     (0x01 << 0)
 #define S3C2410_GPG0_EINT8    (0x02 << 0)
 #define S3C2400_GPG0_I2SLRCK  (0x02 << 0)
 
 #define S3C2410_GPG1          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
-#define S3C2410_GPG1_INP      (0x00 << 2)
-#define S3C2410_GPG1_OUTP     (0x01 << 2)
 #define S3C2410_GPG1_EINT9    (0x02 << 2)
 #define S3C2400_GPG1_I2SSCLK  (0x02 << 2)
 
 #define S3C2410_GPG2          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
-#define S3C2410_GPG2_INP      (0x00 << 4)
-#define S3C2410_GPG2_OUTP     (0x01 << 4)
 #define S3C2410_GPG2_EINT10   (0x02 << 4)
 #define S3C2410_GPG2_nSS0     (0x03 << 4)
 #define S3C2400_GPG2_CDCLK    (0x02 << 4)
 
 #define S3C2410_GPG3          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
-#define S3C2410_GPG3_INP      (0x00 << 6)
-#define S3C2410_GPG3_OUTP     (0x01 << 6)
 #define S3C2410_GPG3_EINT11   (0x02 << 6)
 #define S3C2410_GPG3_nSS1     (0x03 << 6)
 #define S3C2400_GPG3_I2SSDO   (0x02 << 6)
 #define S3C2400_GPG3_I2SSDI   (0x03 << 6)
 
 #define S3C2410_GPG4          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
-#define S3C2410_GPG4_INP      (0x00 << 8)
-#define S3C2410_GPG4_OUTP     (0x01 << 8)
 #define S3C2410_GPG4_EINT12   (0x02 << 8)
 #define S3C2400_GPG4_MMCCLK   (0x02 << 8)
 #define S3C2400_GPG4_I2SSDI   (0x03 << 8)
@@ -815,80 +648,58 @@
 #define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
 
 #define S3C2410_GPG5          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
-#define S3C2410_GPG5_INP      (0x00 << 10)
-#define S3C2410_GPG5_OUTP     (0x01 << 10)
 #define S3C2410_GPG5_EINT13   (0x02 << 10)
 #define S3C2400_GPG5_MMCCMD   (0x02 << 10)
 #define S3C2400_GPG5_IICSDA   (0x03 << 10)
 #define S3C2410_GPG5_SPIMISO1 (0x03 << 10)	/* not s3c2443 */
 
 #define S3C2410_GPG6          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
-#define S3C2410_GPG6_INP      (0x00 << 12)
-#define S3C2410_GPG6_OUTP     (0x01 << 12)
 #define S3C2410_GPG6_EINT14   (0x02 << 12)
 #define S3C2400_GPG6_MMCDAT   (0x02 << 12)
 #define S3C2400_GPG6_IICSCL   (0x03 << 12)
 #define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
 
 #define S3C2410_GPG7          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
-#define S3C2410_GPG7_INP      (0x00 << 14)
-#define S3C2410_GPG7_OUTP     (0x01 << 14)
 #define S3C2410_GPG7_EINT15   (0x02 << 14)
 #define S3C2410_GPG7_SPICLK1  (0x03 << 14)
 #define S3C2400_GPG7_SPIMISO  (0x02 << 14)
 #define S3C2400_GPG7_IICSDA   (0x03 << 14)
 
 #define S3C2410_GPG8          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
-#define S3C2410_GPG8_INP      (0x00 << 16)
-#define S3C2410_GPG8_OUTP     (0x01 << 16)
 #define S3C2410_GPG8_EINT16   (0x02 << 16)
 #define S3C2400_GPG8_SPIMOSI  (0x02 << 16)
 #define S3C2400_GPG8_IICSCL   (0x03 << 16)
 
 #define S3C2410_GPG9          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
-#define S3C2410_GPG9_INP      (0x00 << 18)
-#define S3C2410_GPG9_OUTP     (0x01 << 18)
 #define S3C2410_GPG9_EINT17   (0x02 << 18)
 #define S3C2400_GPG9_SPICLK   (0x02 << 18)
 #define S3C2400_GPG9_MMCCLK   (0x03 << 18)
 
 #define S3C2410_GPG10         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
-#define S3C2410_GPG10_INP     (0x00 << 20)
-#define S3C2410_GPG10_OUTP    (0x01 << 20)
 #define S3C2410_GPG10_EINT18  (0x02 << 20)
 
 #define S3C2410_GPG11         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11)
-#define S3C2410_GPG11_INP     (0x00 << 22)
-#define S3C2410_GPG11_OUTP    (0x01 << 22)
 #define S3C2410_GPG11_EINT19  (0x02 << 22)
 #define S3C2410_GPG11_TCLK1   (0x03 << 22)
 #define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
 
 #define S3C2410_GPG12         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
-#define S3C2410_GPG12_INP     (0x00 << 24)
-#define S3C2410_GPG12_OUTP    (0x01 << 24)
 #define S3C2410_GPG12_EINT20  (0x02 << 24)
 #define S3C2410_GPG12_XMON    (0x03 << 24)
 #define S3C2442_GPG12_nSPICS0 (0x03 << 24)
 #define S3C2443_GPG12_nINPACK (0x03 << 24)
 
 #define S3C2410_GPG13         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
-#define S3C2410_GPG13_INP     (0x00 << 26)
-#define S3C2410_GPG13_OUTP    (0x01 << 26)
 #define S3C2410_GPG13_EINT21  (0x02 << 26)
 #define S3C2410_GPG13_nXPON   (0x03 << 26)
 #define S3C2443_GPG13_CF_nREG (0x03 << 26)
 
 #define S3C2410_GPG14         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
-#define S3C2410_GPG14_INP     (0x00 << 28)
-#define S3C2410_GPG14_OUTP    (0x01 << 28)
 #define S3C2410_GPG14_EINT22  (0x02 << 28)
 #define S3C2410_GPG14_YMON    (0x03 << 28)
 #define S3C2443_GPG14_CF_RESET (0x03 << 28)
 
 #define S3C2410_GPG15         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
-#define S3C2410_GPG15_INP     (0x00 << 30)
-#define S3C2410_GPG15_OUTP    (0x01 << 30)
 #define S3C2410_GPG15_EINT23  (0x02 << 30)
 #define S3C2410_GPG15_nYPON   (0x03 << 30)
 #define S3C2443_GPG15_CF_PWR  (0x03 << 30)
@@ -908,61 +719,39 @@
 #define S3C2410_GPHUP	   S3C2410_GPIOREG(0x78)
 
 #define S3C2410_GPH0        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
-#define S3C2410_GPH0_INP    (0x00 << 0)
-#define S3C2410_GPH0_OUTP   (0x01 << 0)
 #define S3C2410_GPH0_nCTS0  (0x02 << 0)
 
 #define S3C2410_GPH1        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
-#define S3C2410_GPH1_INP    (0x00 << 2)
-#define S3C2410_GPH1_OUTP   (0x01 << 2)
 #define S3C2410_GPH1_nRTS0  (0x02 << 2)
 
 #define S3C2410_GPH2        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
-#define S3C2410_GPH2_INP    (0x00 << 4)
-#define S3C2410_GPH2_OUTP   (0x01 << 4)
 #define S3C2410_GPH2_TXD0   (0x02 << 4)
 
 #define S3C2410_GPH3        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
-#define S3C2410_GPH3_INP    (0x00 << 6)
-#define S3C2410_GPH3_OUTP   (0x01 << 6)
 #define S3C2410_GPH3_RXD0   (0x02 << 6)
 
 #define S3C2410_GPH4        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
-#define S3C2410_GPH4_INP    (0x00 << 8)
-#define S3C2410_GPH4_OUTP   (0x01 << 8)
 #define S3C2410_GPH4_TXD1   (0x02 << 8)
 
 #define S3C2410_GPH5        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
-#define S3C2410_GPH5_INP    (0x00 << 10)
-#define S3C2410_GPH5_OUTP   (0x01 << 10)
 #define S3C2410_GPH5_RXD1   (0x02 << 10)
 
 #define S3C2410_GPH6        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
-#define S3C2410_GPH6_INP    (0x00 << 12)
-#define S3C2410_GPH6_OUTP   (0x01 << 12)
 #define S3C2410_GPH6_TXD2   (0x02 << 12)
 #define S3C2410_GPH6_nRTS1  (0x03 << 12)
 
 #define S3C2410_GPH7        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
-#define S3C2410_GPH7_INP    (0x00 << 14)
-#define S3C2410_GPH7_OUTP   (0x01 << 14)
 #define S3C2410_GPH7_RXD2   (0x02 << 14)
 #define S3C2410_GPH7_nCTS1  (0x03 << 14)
 
 #define S3C2410_GPH8        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
-#define S3C2410_GPH8_INP    (0x00 << 16)
-#define S3C2410_GPH8_OUTP   (0x01 << 16)
 #define S3C2410_GPH8_UCLK   (0x02 << 16)
 
 #define S3C2410_GPH9          S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
-#define S3C2410_GPH9_INP      (0x00 << 18)
-#define S3C2410_GPH9_OUTP     (0x01 << 18)
 #define S3C2410_GPH9_CLKOUT0  (0x02 << 18)
 #define S3C2442_GPH9_nSPICS0  (0x03 << 18)
 
 #define S3C2410_GPH10         S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
-#define S3C2410_GPH10_INP     (0x00 << 20)
-#define S3C2410_GPH10_OUTP    (0x01 << 20)
 #define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
 
 /* The S3C2412 and S3C2413 move the GPJ register set to after
-- 
cgit v1.2.3


From fda7b2b097fed9f88bc93ed3de0caea87ffe778e Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sun, 17 May 2009 22:18:27 +0100
Subject: [ARM] S3C24XX: GPIO: Start removal of S3C24XX_GPIO_BASE

The S3C24XX_GPIO_BASE makes it difficult to compress the
GPIO number space, and is only used in a few places of
which everything outside arch/arm/plat-s3c24xx/gpiolib.c
will be removed as soon as possible.

Change gpiolib.c to use the S3C2410_GPxCON register addresses
as the base for each bank, thus eliminating S3C24XX_GPIO_BASE.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/gpiolib.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 3cbec6d3f38..60a9f724720 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -79,7 +79,7 @@ static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset)
 
 struct s3c_gpio_chip s3c24xx_gpios[] = {
 	[0] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPA0),
+		.base	= S3C2410_GPACON,
 		.pm	= __gpio_pm(&s3c_gpio_pm_1bit),
 		.chip	= {
 			.base			= S3C2410_GPA0,
@@ -91,7 +91,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 		},
 	},
 	[1] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPB0),
+		.base	= S3C2410_GPBCON,
 		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
 			.base			= S3C2410_GPB0,
@@ -101,7 +101,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 		},
 	},
 	[2] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPC0),
+		.base	= S3C2410_GPCCON,
 		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
 			.base			= S3C2410_GPC0,
@@ -111,7 +111,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 		},
 	},
 	[3] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPD0),
+		.base	= S3C2410_GPDCON,
 		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
 			.base			= S3C2410_GPD0,
@@ -121,7 +121,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 		},
 	},
 	[4] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPE0),
+		.base	= S3C2410_GPECON,
 		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
 			.base			= S3C2410_GPE0,
@@ -131,7 +131,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 		},
 	},
 	[5] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPF0),
+		.base	= S3C2410_GPFCON,
 		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
 			.base			= S3C2410_GPF0,
@@ -142,7 +142,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 		},
 	},
 	[6] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPG0),
+		.base	= S3C2410_GPGCON,
 		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
 			.base			= S3C2410_GPG0,
-- 
cgit v1.2.3


From 75cbcff3729fe2568dff38d16d6494f8fb7f59fe Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sun, 17 May 2009 22:44:33 +0100
Subject: [ARM] S3C24XX: GPIO: Add S3C64XX style GPIO numbering

Move the new style of GPIO numbering by using a single
macro for each GPIO bank. This means S3C2410_GPA0 becomes
S3C2410_GPA(0), and so on.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/gpio-nrs.h | 49 +++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
index ce1ec69806a..5213e453df1 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
@@ -11,6 +11,9 @@
  * published by the Free Software Foundation.
 */
 
+#ifndef __MACH_GPIONRS_H
+#define __MACH_GPIONRS_H
+
 #define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
 
 #define S3C2410_GPIO_BANKA   (32*0)
@@ -21,3 +24,49 @@
 #define S3C2410_GPIO_BANKF   (32*5)
 #define S3C2410_GPIO_BANKG   (32*6)
 #define S3C2410_GPIO_BANKH   (32*7)
+
+/* GPIO bank sizes */
+#define S3C2410_GPIO_A_NR	(32)
+#define S3C2410_GPIO_B_NR	(32)
+#define S3C2410_GPIO_C_NR	(32)
+#define S3C2410_GPIO_D_NR	(32)
+#define S3C2410_GPIO_E_NR	(32)
+#define S3C2410_GPIO_F_NR	(32)
+#define S3C2410_GPIO_G_NR	(32)
+#define S3C2410_GPIO_H_NR	(32)
+
+#if CONFIG_S3C_GPIO_SPACE != 0
+#error CONFIG_S3C_GPIO_SPACE cannot be zero at the moment
+#endif
+
+#define S3C2410_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
+
+#ifndef __ASSEMBLY__
+
+enum s3c_gpio_number {
+	S3C2410_GPIO_A_START = 0,
+	S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
+	S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
+	S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
+	S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
+	S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
+	S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
+	S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
+};
+
+#endif /* __ASSEMBLY__ */
+
+/* S3C2410 GPIO number definitions. */
+
+#define S3C2410_GPA(_nr)	(S3C2410_GPIO_A_START + (_nr))
+#define S3C2410_GPB(_nr)	(S3C2410_GPIO_B_START + (_nr))
+#define S3C2410_GPC(_nr)	(S3C2410_GPIO_C_START + (_nr))
+#define S3C2410_GPD(_nr)	(S3C2410_GPIO_D_START + (_nr))
+#define S3C2410_GPE(_nr)	(S3C2410_GPIO_E_START + (_nr))
+#define S3C2410_GPF(_nr)	(S3C2410_GPIO_F_START + (_nr))
+#define S3C2410_GPG(_nr)	(S3C2410_GPIO_G_START + (_nr))
+#define S3C2410_GPH(_nr)	(S3C2410_GPIO_H_START + (_nr))
+
+#endif /* __MACH_GPIONRS_H */
+
-- 
cgit v1.2.3


From 070276d5d049f385763dee19112bea08f56c9a0d Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sun, 17 May 2009 22:32:23 +0100
Subject: [ARM] S3C24XX: GPIO: Change to macros for GPIO numbering

Prepare to remove the large number of S3C2410_GPxn defines
by moving to S3C2410_GPx(n) in arch/arm.

The following perl was used to change the files:

    perl -pi~ -e 's/S3C2410_GP([A-Z])([0-9]+)([^_^0-9])/S3C2410_GP\1\(\2\)\3/g'

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 Documentation/arm/Samsung-S3C24XX/GPIO.txt     |  10 +-
 arch/arm/mach-s3c2400/gpio.c                   |   4 +-
 arch/arm/mach-s3c2410/gpio.c                   |   4 +-
 arch/arm/mach-s3c2410/h1940-bluetooth.c        |  24 ++---
 arch/arm/mach-s3c2410/include/mach/gpio-core.h |   2 +-
 arch/arm/mach-s3c2410/include/mach/gpio-fns.h  |   8 +-
 arch/arm/mach-s3c2410/include/mach/gpio-nrs.h  |  21 +++++
 arch/arm/mach-s3c2410/include/mach/regs-gpio.h | 122 -------------------------
 arch/arm/mach-s3c2410/mach-amlm5900.c          |   4 +-
 arch/arm/mach-s3c2410/mach-bast.c              |   6 +-
 arch/arm/mach-s3c2410/mach-h1940.c             |   2 +-
 arch/arm/mach-s3c2410/mach-n30.c               |  50 +++++-----
 arch/arm/mach-s3c2410/mach-qt2410.c            |  18 ++--
 arch/arm/mach-s3c2410/mach-vr1000.c            |  10 +-
 arch/arm/mach-s3c2410/pm.c                     |   4 +-
 arch/arm/mach-s3c2410/usb-simtec.c             |  10 +-
 arch/arm/mach-s3c2412/mach-jive.c              |  42 ++++-----
 arch/arm/mach-s3c2412/mach-smdk2413.c          |   8 +-
 arch/arm/mach-s3c2440/mach-anubis.c            |   2 +-
 arch/arm/mach-s3c2440/mach-at2440evb.c         |   2 +-
 arch/arm/mach-s3c2440/mach-nexcoder.c          |  16 ++--
 arch/arm/mach-s3c2440/mach-osiris.c            |   8 +-
 arch/arm/plat-s3c24xx/common-smdk.c            |  24 ++---
 arch/arm/plat-s3c24xx/gpio.c                   |  14 +--
 arch/arm/plat-s3c24xx/gpiolib.c                |  14 +--
 arch/arm/plat-s3c24xx/pm.c                     |   8 +-
 arch/arm/plat-s3c24xx/setup-i2c.c              |   4 +-
 arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c   |  20 ++--
 arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c      |  20 ++--
 29 files changed, 190 insertions(+), 291 deletions(-)

diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
index ea7ccfc4b27..948c8718d96 100644
--- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt
+++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
@@ -51,7 +51,7 @@ PIN Numbers
 -----------
 
   Each pin has an unique number associated with it in regs-gpio.h,
-  eg S3C2410_GPA0 or S3C2410_GPF1. These defines are used to tell
+  eg S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
   the GPIO functions which pin is to be used.
 
 
@@ -65,11 +65,11 @@ Configuring a pin
 
   Eg:
 
-     s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
-     s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
+     s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
+     s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
 
-   which would turn GPA0 into the lowest Address line A0, and set
-   GPE8 to be connected to the SDIO/MMC controller's SDDAT1 line.
+   which would turn GPA(0) into the lowest Address line A0, and set
+   GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
 
 
 Reading the current configuration
diff --git a/arch/arm/mach-s3c2400/gpio.c b/arch/arm/mach-s3c2400/gpio.c
index 7a7ed4174c8..81ebe2f0990 100644
--- a/arch/arm/mach-s3c2400/gpio.c
+++ b/arch/arm/mach-s3c2400/gpio.c
@@ -33,10 +33,10 @@
 
 int s3c2400_gpio_getirq(unsigned int pin)
 {
-	if (pin < S3C2410_GPE0 || pin > S3C2400_GPE7_EINT7)
+	if (pin < S3C2410_GPE(0) || pin > S3C2400_GPE7_EINT7)
 		return -1;  /* not valid interrupts */
 
-	return (pin - S3C2410_GPE0) + IRQ_EINT0;
+	return (pin - S3C2410_GPE(0)) + IRQ_EINT0;
 }
 
 EXPORT_SYMBOL(s3c2400_gpio_getirq);
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index 36a3132f39e..bf7fbfe7e4d 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -39,12 +39,12 @@ int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
 	unsigned long flags;
 	unsigned long val;
 
-	if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15)
+	if (pin < S3C2410_GPG(8) || pin > S3C2410_GPG(15))
 		return -1;
 
 	config &= 0xff;
 
-	pin -= S3C2410_GPG8;
+	pin -= S3C2410_GPG(8);
 	reg += pin & ~3;
 
 	local_irq_save(flags);
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 9bbea8a73dd..5aabf117cbb 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -43,9 +43,9 @@ static void h1940bt_enable(int on)
 		h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
 		/* Reset the chip */
 		mdelay(10);
-		s3c2410_gpio_setpin(S3C2410_GPH1, 1);
+		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
 		mdelay(10);
-		s3c2410_gpio_setpin(S3C2410_GPH1, 0);
+		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
 
 		state = 1;
 	}
@@ -54,9 +54,9 @@ static void h1940bt_enable(int on)
 		led_trigger_event(bt_led_trigger, 0);
 #endif
 
-		s3c2410_gpio_setpin(S3C2410_GPH1, 1);
+		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
 		mdelay(10);
-		s3c2410_gpio_setpin(S3C2410_GPH1, 0);
+		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
 		mdelay(10);
 		h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
 
@@ -89,14 +89,14 @@ static DEVICE_ATTR(enable, 0644,
 static int __init h1940bt_probe(struct platform_device *pdev)
 {
 	/* Configures BT serial port GPIOs */
-	s3c2410_gpio_cfgpin(S3C2410_GPH0, S3C2410_GPH0_nCTS0);
-	s3c2410_gpio_pullup(S3C2410_GPH0, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_pullup(S3C2410_GPH1, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH2, S3C2410_GPH2_TXD0);
-	s3c2410_gpio_pullup(S3C2410_GPH2, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH3, S3C2410_GPH3_RXD0);
-	s3c2410_gpio_pullup(S3C2410_GPH3, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
+	s3c2410_gpio_pullup(S3C2410_GPH(0), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_pullup(S3C2410_GPH(1), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
+	s3c2410_gpio_pullup(S3C2410_GPH(2), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
+	s3c2410_gpio_pullup(S3C2410_GPH(3), 1);
 
 #ifdef CONFIG_LEDS_H1940
 	led_trigger_register_simple("h1940-bluetooth", &bt_led_trigger);
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
index 6c9fbb99ef1..8fe192081d3 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-core.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
@@ -24,7 +24,7 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
 {
 	struct s3c_gpio_chip *chip;
 
-	if (pin > S3C2410_GPG10)
+	if (pin > S3C2410_GPG(10))
 		return NULL;
 
 	chip = &s3c24xx_gpios[pin/32];
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
index b4f39558bed..801dff13858 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
@@ -30,8 +30,8 @@
  * set the configuration of the given pin to the value passed.
  *
  * eg:
- *    s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
- *    s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
+ *    s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
+ *    s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
 */
 
 extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
@@ -80,8 +80,8 @@ extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
  *
  * eg;
  *
- *   s3c2410_gpio_pullup(S3C2410_GPB0, 0);
- *   s3c2410_gpio_pullup(S3C2410_GPE8, 0);
+ *   s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
+ *   s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
 */
 
 extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
index 5213e453df1..2edbb9c88ab 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
@@ -68,5 +68,26 @@ enum s3c_gpio_number {
 #define S3C2410_GPG(_nr)	(S3C2410_GPIO_G_START + (_nr))
 #define S3C2410_GPH(_nr)	(S3C2410_GPIO_H_START + (_nr))
 
+/* compatibility until drivers can be modified */
+
+#define S3C2410_GPA0	S3C2410_GPA(0)
+#define S3C2410_GPA1	S3C2410_GPA(1)
+#define S3C2410_GPA3	S3C2410_GPA(3)
+#define S3C2410_GPA7	S3C2410_GPA(7)
+
+#define S3C2410_GPE0	S3C2410_GPE(0)
+#define S3C2410_GPE1	S3C2410_GPE(1)
+#define S3C2410_GPE2	S3C2410_GPE(2)
+#define S3C2410_GPE3	S3C2410_GPE(3)
+#define S3C2410_GPE4	S3C2410_GPE(4)
+#define S3C2410_GPE5	S3C2410_GPE(5)
+#define S3C2410_GPE6	S3C2410_GPE(6)
+#define S3C2410_GPE7	S3C2410_GPE(7)
+#define S3C2410_GPE8	S3C2410_GPE(8)
+#define S3C2410_GPE9	S3C2410_GPE(9)
+#define S3C2410_GPE10	S3C2410_GPE(10)
+
+#define S3C2410_GPH10	S3C2410_GPH(10)
+
 #endif /* __MACH_GPIONRS_H */
 
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index 90cefebd293..b278d0c45cc 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -69,81 +69,58 @@
 #define S3C2400_GPACON	   S3C2410_GPIOREG(0x00)
 #define S3C2400_GPADAT	   S3C2410_GPIOREG(0x04)
 
-#define S3C2410_GPA0         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
 #define S3C2410_GPA0_ADDR0   (1<<0)
 
-#define S3C2410_GPA1         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
 #define S3C2410_GPA1_ADDR16  (1<<1)
 
-#define S3C2410_GPA2         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
 #define S3C2410_GPA2_ADDR17  (1<<2)
 
-#define S3C2410_GPA3         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
 #define S3C2410_GPA3_ADDR18  (1<<3)
 
-#define S3C2410_GPA4         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
 #define S3C2410_GPA4_ADDR19  (1<<4)
 
-#define S3C2410_GPA5         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
 #define S3C2410_GPA5_ADDR20  (1<<5)
 
-#define S3C2410_GPA6         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
 #define S3C2410_GPA6_ADDR21  (1<<6)
 
-#define S3C2410_GPA7         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
 #define S3C2410_GPA7_ADDR22  (1<<7)
 
-#define S3C2410_GPA8         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
 #define S3C2410_GPA8_ADDR23  (1<<8)
 
-#define S3C2410_GPA9         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
 #define S3C2410_GPA9_ADDR24  (1<<9)
 
-#define S3C2410_GPA10        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
 #define S3C2410_GPA10_ADDR25 (1<<10)
 #define S3C2400_GPA10_SCKE   (1<<10)
 
-#define S3C2410_GPA11        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
 #define S3C2410_GPA11_ADDR26 (1<<11)
 #define S3C2400_GPA11_nCAS0  (1<<11)
 
-#define S3C2410_GPA12        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
 #define S3C2410_GPA12_nGCS1  (1<<12)
 #define S3C2400_GPA12_nCAS1  (1<<12)
 
-#define S3C2410_GPA13        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
 #define S3C2410_GPA13_nGCS2  (1<<13)
 #define S3C2400_GPA13_nGCS1  (1<<13)
 
-#define S3C2410_GPA14        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
 #define S3C2410_GPA14_nGCS3  (1<<14)
 #define S3C2400_GPA14_nGCS2  (1<<14)
 
-#define S3C2410_GPA15        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
 #define S3C2410_GPA15_nGCS4  (1<<15)
 #define S3C2400_GPA15_nGCS3  (1<<15)
 
-#define S3C2410_GPA16        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
 #define S3C2410_GPA16_nGCS5  (1<<16)
 #define S3C2400_GPA16_nGCS4  (1<<16)
 
-#define S3C2410_GPA17        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
 #define S3C2410_GPA17_CLE    (1<<17)
 #define S3C2400_GPA17_nGCS5  (1<<17)
 
-#define S3C2410_GPA18        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
 #define S3C2410_GPA18_ALE    (1<<18)
 
-#define S3C2410_GPA19        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
 #define S3C2410_GPA19_nFWE   (1<<19)
 
-#define S3C2410_GPA20        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
 #define S3C2410_GPA20_nFRE   (1<<20)
 
-#define S3C2410_GPA21        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
 #define S3C2410_GPA21_nRSTOUT (1<<21)
 
-#define S3C2410_GPA22        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
 #define S3C2410_GPA22_nFCE   (1<<22)
 
 /* 0x08 and 0x0c are reserved on S3C2410 */
@@ -171,85 +148,69 @@
 
 /* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
 
-#define S3C2410_GPB0         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
 #define S3C2410_GPB0_TOUT0   (0x02 << 0)
 #define S3C2400_GPB0_DATA16  (0x02 << 0)
 
-#define S3C2410_GPB1         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
 #define S3C2410_GPB1_TOUT1   (0x02 << 2)
 #define S3C2400_GPB1_DATA17  (0x02 << 2)
 
-#define S3C2410_GPB2         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
 #define S3C2410_GPB2_TOUT2   (0x02 << 4)
 #define S3C2400_GPB2_DATA18  (0x02 << 4)
 #define S3C2400_GPB2_TCLK1   (0x03 << 4)
 
-#define S3C2410_GPB3         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
 #define S3C2410_GPB3_TOUT3   (0x02 << 6)
 #define S3C2400_GPB3_DATA19  (0x02 << 6)
 #define S3C2400_GPB3_TXD1    (0x03 << 6)
 
-#define S3C2410_GPB4         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
 #define S3C2410_GPB4_TCLK0   (0x02 << 8)
 #define S3C2400_GPB4_DATA20  (0x02 << 8)
 #define S3C2410_GPB4_MASK    (0x03 << 8)
 #define S3C2400_GPB4_RXD1    (0x03 << 8)
 #define S3C2400_GPB4_MASK    (0x03 << 8)
 
-#define S3C2410_GPB5         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
 #define S3C2410_GPB5_nXBACK  (0x02 << 10)
 #define S3C2443_GPB5_XBACK   (0x03 << 10)
 #define S3C2400_GPB5_DATA21  (0x02 << 10)
 #define S3C2400_GPB5_nCTS1   (0x03 << 10)
 
-#define S3C2410_GPB6         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
 #define S3C2410_GPB6_nXBREQ  (0x02 << 12)
 #define S3C2443_GPB6_XBREQ   (0x03 << 12)
 #define S3C2400_GPB6_DATA22  (0x02 << 12)
 #define S3C2400_GPB6_nRTS1   (0x03 << 12)
 
-#define S3C2410_GPB7         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
 #define S3C2410_GPB7_nXDACK1 (0x02 << 14)
 #define S3C2443_GPB7_XDACK1  (0x03 << 14)
 #define S3C2400_GPB7_DATA23  (0x02 << 14)
 
-#define S3C2410_GPB8         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
 #define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
 #define S3C2400_GPB8_DATA24  (0x02 << 16)
 
-#define S3C2410_GPB9         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
 #define S3C2410_GPB9_nXDACK0 (0x02 << 18)
 #define S3C2443_GPB9_XDACK0  (0x03 << 18)
 #define S3C2400_GPB9_DATA25  (0x02 << 18)
 #define S3C2400_GPB9_I2SSDI  (0x03 << 18)
 
-#define S3C2410_GPB10        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
 #define S3C2410_GPB10_nXDRE0 (0x02 << 20)
 #define S3C2443_GPB10_XDREQ0 (0x03 << 20)
 #define S3C2400_GPB10_DATA26 (0x02 << 20)
 #define S3C2400_GPB10_nSS    (0x03 << 20)
 
-#define S3C2400_GPB11        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11)
 #define S3C2400_GPB11_INP    (0x00 << 22)
 #define S3C2400_GPB11_OUTP   (0x01 << 22)
 #define S3C2400_GPB11_DATA27 (0x02 << 22)
 
-#define S3C2400_GPB12        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12)
 #define S3C2400_GPB12_INP    (0x00 << 24)
 #define S3C2400_GPB12_OUTP   (0x01 << 24)
 #define S3C2400_GPB12_DATA28 (0x02 << 24)
 
-#define S3C2400_GPB13        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13)
 #define S3C2400_GPB13_INP    (0x00 << 26)
 #define S3C2400_GPB13_OUTP   (0x01 << 26)
 #define S3C2400_GPB13_DATA29 (0x02 << 26)
 
-#define S3C2400_GPB14        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14)
 #define S3C2400_GPB14_INP    (0x00 << 28)
 #define S3C2400_GPB14_OUTP   (0x01 << 28)
 #define S3C2400_GPB14_DATA30 (0x02 << 28)
 
-#define S3C2400_GPB15        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15)
 #define S3C2400_GPB15_INP    (0x00 << 30)
 #define S3C2400_GPB15_OUTP   (0x01 << 30)
 #define S3C2400_GPB15_DATA31 (0x02 << 30)
@@ -270,67 +231,51 @@
 #define S3C2400_GPCDAT	   S3C2410_GPIOREG(0x18)
 #define S3C2400_GPCUP	   S3C2410_GPIOREG(0x1C)
 
-#define S3C2410_GPC0            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
 #define S3C2410_GPC0_LEND	(0x02 << 0)
 #define S3C2400_GPC0_VD0 	(0x02 << 0)
 
-#define S3C2410_GPC1            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
 #define S3C2410_GPC1_VCLK	(0x02 << 2)
 #define S3C2400_GPC1_VD1 	(0x02 << 2)
 
-#define S3C2410_GPC2            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
 #define S3C2410_GPC2_VLINE	(0x02 << 4)
 #define S3C2400_GPC2_VD2  	(0x02 << 4)
 
-#define S3C2410_GPC3            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
 #define S3C2410_GPC3_VFRAME	(0x02 << 6)
 #define S3C2400_GPC3_VD3   	(0x02 << 6)
 
-#define S3C2410_GPC4            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
 #define S3C2410_GPC4_VM		(0x02 << 8)
 #define S3C2400_GPC4_VD4	(0x02 << 8)
 
-#define S3C2410_GPC5            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
 #define S3C2410_GPC5_LCDVF0	(0x02 << 10)
 #define S3C2400_GPC5_VD5   	(0x02 << 10)
 
-#define S3C2410_GPC6            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
 #define S3C2410_GPC6_LCDVF1	(0x02 << 12)
 #define S3C2400_GPC6_VD6   	(0x02 << 12)
 
-#define S3C2410_GPC7            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
 #define S3C2410_GPC7_LCDVF2	(0x02 << 14)
 #define S3C2400_GPC7_VD7   	(0x02 << 14)
 
-#define S3C2410_GPC8            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
 #define S3C2410_GPC8_VD0	(0x02 << 16)
 #define S3C2400_GPC8_VD8	(0x02 << 16)
 
-#define S3C2410_GPC9            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
 #define S3C2410_GPC9_VD1	(0x02 << 18)
 #define S3C2400_GPC9_VD9	(0x02 << 18)
 
-#define S3C2410_GPC10           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
 #define S3C2410_GPC10_VD2	(0x02 << 20)
 #define S3C2400_GPC10_VD10	(0x02 << 20)
 
-#define S3C2410_GPC11           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
 #define S3C2410_GPC11_VD3	(0x02 << 22)
 #define S3C2400_GPC11_VD11	(0x02 << 22)
 
-#define S3C2410_GPC12           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
 #define S3C2410_GPC12_VD4	(0x02 << 24)
 #define S3C2400_GPC12_VD12	(0x02 << 24)
 
-#define S3C2410_GPC13           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
 #define S3C2410_GPC13_VD5	(0x02 << 26)
 #define S3C2400_GPC13_VD13	(0x02 << 26)
 
-#define S3C2410_GPC14           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
 #define S3C2410_GPC14_VD6	(0x02 << 28)
 #define S3C2400_GPC14_VD14	(0x02 << 28)
 
-#define S3C2410_GPC15           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
 #define S3C2410_GPC15_VD7	(0x02 << 30)
 #define S3C2400_GPC15_VD15	(0x02 << 30)
 
@@ -355,67 +300,51 @@
 #define S3C2400_GPDDAT	   S3C2410_GPIOREG(0x24)
 #define S3C2400_GPDUP	   S3C2410_GPIOREG(0x28)
 
-#define S3C2410_GPD0            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
 #define S3C2410_GPD0_VD8	(0x02 << 0)
 #define S3C2400_GPD0_VFRAME	(0x02 << 0)
 #define S3C2442_GPD0_nSPICS1	(0x03 << 0)
 
-#define S3C2410_GPD1            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
 #define S3C2410_GPD1_VD9	(0x02 << 2)
 #define S3C2400_GPD1_VM		(0x02 << 2)
 #define S3C2442_GPD1_SPICLK1	(0x03 << 2)
 
-#define S3C2410_GPD2            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
 #define S3C2410_GPD2_VD10	(0x02 << 4)
 #define S3C2400_GPD2_VLINE	(0x02 << 4)
 
-#define S3C2410_GPD3            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
 #define S3C2410_GPD3_VD11	(0x02 << 6)
 #define S3C2400_GPD3_VCLK	(0x02 << 6)
 
-#define S3C2410_GPD4            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
 #define S3C2410_GPD4_VD12	(0x02 << 8)
 #define S3C2400_GPD4_LEND	(0x02 << 8)
 
-#define S3C2410_GPD5            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
 #define S3C2410_GPD5_VD13	(0x02 << 10)
 #define S3C2400_GPD5_TOUT0	(0x02 << 10)
 
-#define S3C2410_GPD6            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
 #define S3C2410_GPD6_VD14	(0x02 << 12)
 #define S3C2400_GPD6_TOUT1	(0x02 << 12)
 
-#define S3C2410_GPD7            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
 #define S3C2410_GPD7_VD15	(0x02 << 14)
 #define S3C2400_GPD7_TOUT2	(0x02 << 14)
 
-#define S3C2410_GPD8            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
 #define S3C2410_GPD8_VD16	(0x02 << 16)
 #define S3C2400_GPD8_TOUT3	(0x02 << 16)
 
-#define S3C2410_GPD9            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
 #define S3C2410_GPD9_VD17	(0x02 << 18)
 #define S3C2400_GPD9_TCLK0	(0x02 << 18)
 #define S3C2410_GPD9_MASK       (0x03 << 18)
 
-#define S3C2410_GPD10           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
 #define S3C2410_GPD10_VD18	(0x02 << 20)
 #define S3C2400_GPD10_nWAIT	(0x02 << 20)
 
-#define S3C2410_GPD11           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
 #define S3C2410_GPD11_VD19	(0x02 << 22)
 
-#define S3C2410_GPD12           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
 #define S3C2410_GPD12_VD20	(0x02 << 24)
 
-#define S3C2410_GPD13           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
 #define S3C2410_GPD13_VD21	(0x02 << 26)
 
-#define S3C2410_GPD14           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
 #define S3C2410_GPD14_VD22	(0x02 << 28)
 #define S3C2410_GPD14_nSS1	(0x03 << 28)
 
-#define S3C2410_GPD15           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
 #define S3C2410_GPD15_VD23	(0x02 << 30)
 #define S3C2410_GPD15_nSS0	(0x03 << 30)
 
@@ -441,26 +370,22 @@
 #define S3C2400_GPEDAT	   S3C2410_GPIOREG(0x30)
 #define S3C2400_GPEUP	   S3C2410_GPIOREG(0x34)
 
-#define S3C2410_GPE0           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
 #define S3C2410_GPE0_I2SLRCK   (0x02 << 0)
 #define S3C2443_GPE0_AC_nRESET (0x03 << 0)
 #define S3C2400_GPE0_EINT0     (0x02 << 0)
 #define S3C2410_GPE0_MASK      (0x03 << 0)
 
-#define S3C2410_GPE1           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
 #define S3C2410_GPE1_I2SSCLK   (0x02 << 2)
 #define S3C2443_GPE1_AC_SYNC   (0x03 << 2)
 #define S3C2400_GPE1_EINT1     (0x02 << 2)
 #define S3C2400_GPE1_nSS       (0x03 << 2)
 #define S3C2410_GPE1_MASK      (0x03 << 2)
 
-#define S3C2410_GPE2           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
 #define S3C2410_GPE2_CDCLK     (0x02 << 4)
 #define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
 #define S3C2400_GPE2_EINT2     (0x02 << 4)
 #define S3C2400_GPE2_I2SSDI    (0x03 << 4)
 
-#define S3C2410_GPE3           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
 #define S3C2410_GPE3_I2SSDI    (0x02 << 6)
 #define S3C2443_GPE3_AC_SDI    (0x03 << 6)
 #define S3C2400_GPE3_EINT3     (0x02 << 6)
@@ -468,7 +393,6 @@
 #define S3C2410_GPE3_nSS0      (0x03 << 6)
 #define S3C2410_GPE3_MASK      (0x03 << 6)
 
-#define S3C2410_GPE4           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
 #define S3C2410_GPE4_I2SSDO    (0x02 << 8)
 #define S3C2443_GPE4_AC_SDO    (0x03 << 8)
 #define S3C2400_GPE4_EINT4     (0x02 << 8)
@@ -476,59 +400,48 @@
 #define S3C2410_GPE4_I2SSDI    (0x03 << 8)
 #define S3C2410_GPE4_MASK      (0x03 << 8)
 
-#define S3C2410_GPE5           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
 #define S3C2410_GPE5_SDCLK     (0x02 << 10)
 #define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
 #define S3C2400_GPE5_EINT5     (0x02 << 10)
 #define S3C2400_GPE5_TCLK1     (0x03 << 10)
 
-#define S3C2410_GPE6           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
 #define S3C2410_GPE6_SDCMD     (0x02 << 12)
 #define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
 #define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
 #define S3C2400_GPE6_EINT6     (0x02 << 12)
 
-#define S3C2410_GPE7           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
 #define S3C2410_GPE7_SDDAT0    (0x02 << 14)
 #define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
 #define S3C2443_GPE7_AC_SDI    (0x03 << 14)
 #define S3C2400_GPE7_EINT7     (0x02 << 14)
 
-#define S3C2410_GPE8           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
 #define S3C2410_GPE8_SDDAT1    (0x02 << 16)
 #define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
 #define S3C2443_GPE8_AC_SDO    (0x03 << 16)
 #define S3C2400_GPE8_nXDACK0   (0x02 << 16)
 
-#define S3C2410_GPE9           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
 #define S3C2410_GPE9_SDDAT2    (0x02 << 18)
 #define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
 #define S3C2443_GPE9_AC_SYNC   (0x03 << 18)
 #define S3C2400_GPE9_nXDACK1   (0x02 << 18)
 #define S3C2400_GPE9_nXBACK    (0x03 << 18)
 
-#define S3C2410_GPE10          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
 #define S3C2410_GPE10_SDDAT3   (0x02 << 20)
 #define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
 #define S3C2443_GPE10_AC_nRESET (0x03 << 20)
 #define S3C2400_GPE10_nXDREQ0  (0x02 << 20)
 
-#define S3C2410_GPE11          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
 #define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
 #define S3C2400_GPE11_nXDREQ1  (0x02 << 22)
 #define S3C2400_GPE11_nXBREQ   (0x03 << 22)
 
-#define S3C2410_GPE12          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
 #define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
 
-#define S3C2410_GPE13          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
 #define S3C2410_GPE13_SPICLK0  (0x02 << 26)
 
-#define S3C2410_GPE14          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
 #define S3C2410_GPE14_IICSCL   (0x02 << 28)
 #define S3C2410_GPE14_MASK     (0x03 << 28)
 
-#define S3C2410_GPE15          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
 #define S3C2410_GPE15_IICSDA   (0x02 << 30)
 #define S3C2410_GPE15_MASK     (0x03 << 30)
 
@@ -564,39 +477,31 @@
 #define S3C2400_GPFDAT	   S3C2410_GPIOREG(0x3C)
 #define S3C2400_GPFUP	   S3C2410_GPIOREG(0x40)
 
-#define S3C2410_GPF0        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
 #define S3C2410_GPF0_EINT0  (0x02 << 0)
 #define S3C2400_GPF0_RXD0   (0x02 << 0)
 
-#define S3C2410_GPF1        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
 #define S3C2410_GPF1_EINT1  (0x02 << 2)
 #define S3C2400_GPF1_RXD1   (0x02 << 2)
 #define S3C2400_GPF1_IICSDA (0x03 << 2)
 
-#define S3C2410_GPF2        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
 #define S3C2410_GPF2_EINT2  (0x02 << 4)
 #define S3C2400_GPF2_TXD0   (0x02 << 4)
 
-#define S3C2410_GPF3        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
 #define S3C2410_GPF3_EINT3  (0x02 << 6)
 #define S3C2400_GPF3_TXD1   (0x02 << 6)
 #define S3C2400_GPF3_IICSCL (0x03 << 6)
 
-#define S3C2410_GPF4        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
 #define S3C2410_GPF4_EINT4  (0x02 << 8)
 #define S3C2400_GPF4_nRTS0  (0x02 << 8)
 #define S3C2400_GPF4_nXBACK (0x03 << 8)
 
-#define S3C2410_GPF5        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
 #define S3C2410_GPF5_EINT5  (0x02 << 10)
 #define S3C2400_GPF5_nCTS0  (0x02 << 10)
 #define S3C2400_GPF5_nXBREQ (0x03 << 10)
 
-#define S3C2410_GPF6        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
 #define S3C2410_GPF6_EINT6  (0x02 << 12)
 #define S3C2400_GPF6_CLKOUT (0x02 << 12)
 
-#define S3C2410_GPF7        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
 #define S3C2410_GPF7_EINT7  (0x02 << 14)
 
 #define S3C2410_GPF_PUPDIS(x)  (1<<(x))
@@ -621,85 +526,69 @@
 #define S3C2400_GPGDAT	   S3C2410_GPIOREG(0x48)
 #define S3C2400_GPGUP	   S3C2410_GPIOREG(0x4C)
 
-#define S3C2410_GPG0          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
 #define S3C2410_GPG0_EINT8    (0x02 << 0)
 #define S3C2400_GPG0_I2SLRCK  (0x02 << 0)
 
-#define S3C2410_GPG1          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
 #define S3C2410_GPG1_EINT9    (0x02 << 2)
 #define S3C2400_GPG1_I2SSCLK  (0x02 << 2)
 
-#define S3C2410_GPG2          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
 #define S3C2410_GPG2_EINT10   (0x02 << 4)
 #define S3C2410_GPG2_nSS0     (0x03 << 4)
 #define S3C2400_GPG2_CDCLK    (0x02 << 4)
 
-#define S3C2410_GPG3          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
 #define S3C2410_GPG3_EINT11   (0x02 << 6)
 #define S3C2410_GPG3_nSS1     (0x03 << 6)
 #define S3C2400_GPG3_I2SSDO   (0x02 << 6)
 #define S3C2400_GPG3_I2SSDI   (0x03 << 6)
 
-#define S3C2410_GPG4          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
 #define S3C2410_GPG4_EINT12   (0x02 << 8)
 #define S3C2400_GPG4_MMCCLK   (0x02 << 8)
 #define S3C2400_GPG4_I2SSDI   (0x03 << 8)
 #define S3C2410_GPG4_LCDPWREN (0x03 << 8)
 #define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
 
-#define S3C2410_GPG5          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
 #define S3C2410_GPG5_EINT13   (0x02 << 10)
 #define S3C2400_GPG5_MMCCMD   (0x02 << 10)
 #define S3C2400_GPG5_IICSDA   (0x03 << 10)
 #define S3C2410_GPG5_SPIMISO1 (0x03 << 10)	/* not s3c2443 */
 
-#define S3C2410_GPG6          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
 #define S3C2410_GPG6_EINT14   (0x02 << 12)
 #define S3C2400_GPG6_MMCDAT   (0x02 << 12)
 #define S3C2400_GPG6_IICSCL   (0x03 << 12)
 #define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
 
-#define S3C2410_GPG7          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
 #define S3C2410_GPG7_EINT15   (0x02 << 14)
 #define S3C2410_GPG7_SPICLK1  (0x03 << 14)
 #define S3C2400_GPG7_SPIMISO  (0x02 << 14)
 #define S3C2400_GPG7_IICSDA   (0x03 << 14)
 
-#define S3C2410_GPG8          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
 #define S3C2410_GPG8_EINT16   (0x02 << 16)
 #define S3C2400_GPG8_SPIMOSI  (0x02 << 16)
 #define S3C2400_GPG8_IICSCL   (0x03 << 16)
 
-#define S3C2410_GPG9          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
 #define S3C2410_GPG9_EINT17   (0x02 << 18)
 #define S3C2400_GPG9_SPICLK   (0x02 << 18)
 #define S3C2400_GPG9_MMCCLK   (0x03 << 18)
 
-#define S3C2410_GPG10         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
 #define S3C2410_GPG10_EINT18  (0x02 << 20)
 
-#define S3C2410_GPG11         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11)
 #define S3C2410_GPG11_EINT19  (0x02 << 22)
 #define S3C2410_GPG11_TCLK1   (0x03 << 22)
 #define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
 
-#define S3C2410_GPG12         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
 #define S3C2410_GPG12_EINT20  (0x02 << 24)
 #define S3C2410_GPG12_XMON    (0x03 << 24)
 #define S3C2442_GPG12_nSPICS0 (0x03 << 24)
 #define S3C2443_GPG12_nINPACK (0x03 << 24)
 
-#define S3C2410_GPG13         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
 #define S3C2410_GPG13_EINT21  (0x02 << 26)
 #define S3C2410_GPG13_nXPON   (0x03 << 26)
 #define S3C2443_GPG13_CF_nREG (0x03 << 26)
 
-#define S3C2410_GPG14         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
 #define S3C2410_GPG14_EINT22  (0x02 << 28)
 #define S3C2410_GPG14_YMON    (0x03 << 28)
 #define S3C2443_GPG14_CF_RESET (0x03 << 28)
 
-#define S3C2410_GPG15         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
 #define S3C2410_GPG15_EINT23  (0x02 << 30)
 #define S3C2410_GPG15_nYPON   (0x03 << 30)
 #define S3C2443_GPG15_CF_PWR  (0x03 << 30)
@@ -718,40 +607,29 @@
 #define S3C2410_GPHDAT	   S3C2410_GPIOREG(0x74)
 #define S3C2410_GPHUP	   S3C2410_GPIOREG(0x78)
 
-#define S3C2410_GPH0        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
 #define S3C2410_GPH0_nCTS0  (0x02 << 0)
 
-#define S3C2410_GPH1        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
 #define S3C2410_GPH1_nRTS0  (0x02 << 2)
 
-#define S3C2410_GPH2        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
 #define S3C2410_GPH2_TXD0   (0x02 << 4)
 
-#define S3C2410_GPH3        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
 #define S3C2410_GPH3_RXD0   (0x02 << 6)
 
-#define S3C2410_GPH4        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
 #define S3C2410_GPH4_TXD1   (0x02 << 8)
 
-#define S3C2410_GPH5        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
 #define S3C2410_GPH5_RXD1   (0x02 << 10)
 
-#define S3C2410_GPH6        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
 #define S3C2410_GPH6_TXD2   (0x02 << 12)
 #define S3C2410_GPH6_nRTS1  (0x03 << 12)
 
-#define S3C2410_GPH7        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
 #define S3C2410_GPH7_RXD2   (0x02 << 14)
 #define S3C2410_GPH7_nCTS1  (0x03 << 14)
 
-#define S3C2410_GPH8        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
 #define S3C2410_GPH8_UCLK   (0x02 << 16)
 
-#define S3C2410_GPH9          S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
 #define S3C2410_GPH9_CLKOUT0  (0x02 << 18)
 #define S3C2442_GPH9_nSPICS0  (0x03 << 18)
 
-#define S3C2410_GPH10         S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
 #define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
 
 /* The S3C2412 and S3C2413 move the GPJ register set to after
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 43f7536c529..06a84adfb13 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -225,8 +225,8 @@ static void amlm5900_init_pm(void)
 	} else {
 		enable_irq_wake(IRQ_EINT9);
 		/* configure the suspend/resume status pin */
-		s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT);
-		s3c2410_gpio_pullup(S3C2410_GPF2, 0);
+		s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
+		s3c2410_gpio_pullup(S3C2410_GPF(2), 0);
 	}
 }
 static void __init amlm5900_init(void)
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 3410caefb86..496463768de 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -213,15 +213,15 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
 static int bast_pm_suspend(struct sys_device *sd, pm_message_t state)
 {
 	/* ensure that an nRESET is not generated on resume. */
-	s3c2410_gpio_setpin(S3C2410_GPA21, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
 
 	return 0;
 }
 
 static int bast_pm_resume(struct sys_device *sd)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
 	return 0;
 }
 
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 7a7c4da4c25..d9cd5ddecf4 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -127,7 +127,7 @@ static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 
 static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
 	.udc_command		= h1940_udc_pullup,
-	.vbus_pin		= S3C2410_GPG5,
+	.vbus_pin		= S3C2410_GPG(5),
 	.vbus_pin_inverted	= 1,
 };
 
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 83705036ca6..0f6ed61af41 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -86,10 +86,10 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 {
 	switch (cmd) {
 	case S3C2410_UDC_P_ENABLE :
-		s3c2410_gpio_setpin(S3C2410_GPB3, 1);
+		s3c2410_gpio_setpin(S3C2410_GPB(3), 1);
 		break;
 	case S3C2410_UDC_P_DISABLE :
-		s3c2410_gpio_setpin(S3C2410_GPB3, 0);
+		s3c2410_gpio_setpin(S3C2410_GPB(3), 0);
 		break;
 	case S3C2410_UDC_P_RESET :
 		break;
@@ -100,55 +100,55 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 
 static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
 	.udc_command		= n30_udc_pullup,
-	.vbus_pin		= S3C2410_GPG1,
+	.vbus_pin		= S3C2410_GPG(1),
 	.vbus_pin_inverted	= 0,
 };
 
 static struct gpio_keys_button n30_buttons[] = {
 	{
-		.gpio		= S3C2410_GPF0,
+		.gpio		= S3C2410_GPF(0),
 		.code		= KEY_POWER,
 		.desc		= "Power",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG9,
+		.gpio		= S3C2410_GPG(9),
 		.code		= KEY_UP,
 		.desc		= "Thumbwheel Up",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG8,
+		.gpio		= S3C2410_GPG(8),
 		.code		= KEY_DOWN,
 		.desc		= "Thumbwheel Down",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG7,
+		.gpio		= S3C2410_GPG(7),
 		.code		= KEY_ENTER,
 		.desc		= "Thumbwheel Press",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF7,
+		.gpio		= S3C2410_GPF(7),
 		.code		= KEY_HOMEPAGE,
 		.desc		= "Home",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF6,
+		.gpio		= S3C2410_GPF(6),
 		.code		= KEY_CALENDAR,
 		.desc		= "Calendar",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF5,
+		.gpio		= S3C2410_GPF(5),
 		.code		= KEY_ADDRESSBOOK,
 		.desc		= "Contacts",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF4,
+		.gpio		= S3C2410_GPF(4),
 		.code		= KEY_MAIL,
 		.desc		= "Mail",
 		.active_low	= 0,
@@ -170,73 +170,73 @@ static struct platform_device n30_button_device = {
 
 static struct gpio_keys_button n35_buttons[] = {
 	{
-		.gpio		= S3C2410_GPF0,
+		.gpio		= S3C2410_GPF(0),
 		.code		= KEY_POWER,
 		.desc		= "Power",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG9,
+		.gpio		= S3C2410_GPG(9),
 		.code		= KEY_UP,
 		.desc		= "Joystick Up",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG8,
+		.gpio		= S3C2410_GPG(8),
 		.code		= KEY_DOWN,
 		.desc		= "Joystick Down",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG6,
+		.gpio		= S3C2410_GPG(6),
 		.code		= KEY_DOWN,
 		.desc		= "Joystick Left",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG5,
+		.gpio		= S3C2410_GPG(5),
 		.code		= KEY_DOWN,
 		.desc		= "Joystick Right",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG7,
+		.gpio		= S3C2410_GPG(7),
 		.code		= KEY_ENTER,
 		.desc		= "Joystick Press",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF7,
+		.gpio		= S3C2410_GPF(7),
 		.code		= KEY_HOMEPAGE,
 		.desc		= "Home",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF6,
+		.gpio		= S3C2410_GPF(6),
 		.code		= KEY_CALENDAR,
 		.desc		= "Calendar",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF5,
+		.gpio		= S3C2410_GPF(5),
 		.code		= KEY_ADDRESSBOOK,
 		.desc		= "Contacts",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF4,
+		.gpio		= S3C2410_GPF(4),
 		.code		= KEY_MAIL,
 		.desc		= "Mail",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF3,
+		.gpio		= S3C2410_GPF(3),
 		.code		= SW_RADIO,
 		.desc		= "GPS Antenna",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG2,
+		.gpio		= S3C2410_GPG(2),
 		.code		= SW_HEADPHONE_INSERT,
 		.desc		= "Headphone",
 		.active_low	= 0,
@@ -260,7 +260,7 @@ static struct platform_device n35_button_device = {
 /* This is the bluetooth LED on the device. */
 static struct s3c24xx_led_platdata n30_blue_led_pdata = {
 	.name		= "blue_led",
-	.gpio		= S3C2410_GPG6,
+	.gpio		= S3C2410_GPG(6),
 	.def_trigger	= "",
 };
 
@@ -271,7 +271,7 @@ static struct s3c24xx_led_platdata n30_blue_led_pdata = {
 static struct s3c24xx_led_platdata n30_warning_led_pdata = {
 	.name		= "warning_led",
 	.flags          = S3C24XX_LEDF_ACTLOW,
-	.gpio		= S3C2410_GPD9,
+	.gpio		= S3C2410_GPD(9),
 	.def_trigger	= "",
 };
 
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 7520aee3c9e..2cc9849eb44 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -199,7 +199,7 @@ static struct platform_device qt2410_cs89x0 = {
 /* LED */
 
 static struct s3c24xx_led_platdata qt2410_pdata_led = {
-	.gpio		= S3C2410_GPB0,
+	.gpio		= S3C2410_GPB(0),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led",
 	.def_trigger	= "timer",
@@ -219,18 +219,18 @@ static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs)
 {
 	switch (cs) {
 	case BITBANG_CS_ACTIVE:
-		s3c2410_gpio_setpin(S3C2410_GPB5, 0);
+		s3c2410_gpio_setpin(S3C2410_GPB(5), 0);
 		break;
 	case BITBANG_CS_INACTIVE:
-		s3c2410_gpio_setpin(S3C2410_GPB5, 1);
+		s3c2410_gpio_setpin(S3C2410_GPB(5), 1);
 		break;
 	}
 }
 
 static struct s3c2410_spigpio_info spi_gpio_cfg = {
-	.pin_clk	= S3C2410_GPG7,
-	.pin_mosi	= S3C2410_GPG6,
-	.pin_miso	= S3C2410_GPG5,
+	.pin_clk	= S3C2410_GPG(7),
+	.pin_mosi	= S3C2410_GPG(6),
+	.pin_miso	= S3C2410_GPG(5),
 	.chip_select	= &spi_gpio_cs,
 };
 
@@ -347,13 +347,13 @@ static void __init qt2410_machine_init(void)
 	}
 	s3c24xx_fb_set_platdata(&qt2410_fb_info);
 
-	s3c2410_gpio_cfgpin(S3C2410_GPB0, S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_setpin(S3C2410_GPB0, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB(0), 1);
 
 	s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
 	s3c_i2c0_set_platdata(NULL);
 
-	s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(5), S3C2410_GPIO_OUTPUT);
 
 	platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
 	s3c_pm_init();
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 0507a7ec18c..1628cc773a2 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -278,19 +278,19 @@ static struct platform_device vr1000_dm9k1 = {
 
 static struct s3c24xx_led_platdata vr1000_led1_pdata = {
 	.name		= "led1",
-	.gpio		= S3C2410_GPB0,
+	.gpio		= S3C2410_GPB(0),
 	.def_trigger	= "",
 };
 
 static struct s3c24xx_led_platdata vr1000_led2_pdata = {
 	.name		= "led2",
-	.gpio		= S3C2410_GPB1,
+	.gpio		= S3C2410_GPB(1),
 	.def_trigger	= "",
 };
 
 static struct s3c24xx_led_platdata vr1000_led3_pdata = {
 	.name		= "led3",
-	.gpio		= S3C2410_GPB2,
+	.gpio		= S3C2410_GPB(2),
 	.def_trigger	= "",
 };
 
@@ -356,8 +356,8 @@ static struct clk *vr1000_clocks[] __initdata = {
 
 static void vr1000_power_off(void)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPB9, S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_setpin(S3C2410_GPB9, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(9), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB(9), 1);
 }
 
 static void __init vr1000_map_io(void)
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 726cfc09388..143e08a599d 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -77,7 +77,7 @@ static void s3c2410_pm_prepare(void)
 	}
 
 	if ( machine_is_aml_m5900() )
-		s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+		s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
 
 }
 
@@ -92,7 +92,7 @@ static int s3c2410_pm_resume(struct sys_device *dev)
 	__raw_writel(tmp, S3C2410_GSTATUS2);
 
 	if ( machine_is_aml_m5900() )
-		s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+		s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
 
 	return 0;
 }
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 506252b33fe..dd45eb4a6f0 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -54,9 +54,9 @@ usb_simtec_powercontrol(int port, int to)
 	power_state[port] = to;
 
 	if (power_state[0] && power_state[1])
-		s3c2410_gpio_setpin(S3C2410_GPB4, 0);
+		s3c2410_gpio_setpin(S3C2410_GPB(4), 0);
 	else
-		s3c2410_gpio_setpin(S3C2410_GPB4, 1);
+		s3c2410_gpio_setpin(S3C2410_GPB(4), 1);
 }
 
 static irqreturn_t
@@ -64,7 +64,7 @@ usb_simtec_ocirq(int irq, void *pw)
 {
 	struct s3c2410_hcd_info *info = pw;
 
-	if (s3c2410_gpio_getpin(S3C2410_GPG10) == 0) {
+	if (s3c2410_gpio_getpin(S3C2410_GPG(10)) == 0) {
 		pr_debug("usb_simtec: over-current irq (oc detected)\n");
 		s3c2410_usb_report_oc(info, 3);
 	} else {
@@ -110,7 +110,7 @@ int usb_simtec_init(void)
 	printk("USB Power Control, (c) 2004 Simtec Electronics\n");
 	s3c_device_usb.dev.platform_data = &usb_simtec_info;
 
-	s3c2410_gpio_cfgpin(S3C2410_GPB4, S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_setpin(S3C2410_GPB4, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(4), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB(4), 1);
 	return 0;
 }
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 56d12b56c9d..8df506eac90 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -357,8 +357,8 @@ static void jive_lcm_reset(unsigned int set)
 {
 	printk(KERN_DEBUG "%s(%d)\n", __func__, set);
 
-	s3c2410_gpio_setpin(S3C2410_GPG13, set);
-	s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPG(13), set);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT);
 }
 
 #undef LCD_UPPER_MARGIN
@@ -391,13 +391,13 @@ static struct ili9320_platdata jive_lcm_config = {
 
 static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs)
 {
-	s3c2410_gpio_setpin(S3C2410_GPB7, cs ? 0 : 1);
+	s3c2410_gpio_setpin(S3C2410_GPB(7), cs ? 0 : 1);
 }
 
 static struct s3c2410_spigpio_info jive_lcd_spi = {
 	.bus_num	= 1,
-	.pin_clk	= S3C2410_GPG8,
-	.pin_mosi	= S3C2410_GPB8,
+	.pin_clk	= S3C2410_GPG(8),
+	.pin_mosi	= S3C2410_GPB(8),
 	.num_chipselect	= 1,
 	.chip_select	= jive_lcd_spi_chipselect,
 };
@@ -413,13 +413,13 @@ static struct platform_device jive_device_lcdspi = {
 
 static void jive_wm8750_chipselect(struct s3c2410_spigpio_info *spi, int cs)
 {
-	s3c2410_gpio_setpin(S3C2410_GPH10, cs ? 0 : 1);
+	s3c2410_gpio_setpin(S3C2410_GPH(10), cs ? 0 : 1);
 }
 
 static struct s3c2410_spigpio_info jive_wm8750_spi = {
 	.bus_num	= 2,
-	.pin_clk	= S3C2410_GPB4,
-	.pin_mosi	= S3C2410_GPB9,
+	.pin_clk	= S3C2410_GPB(4),
+	.pin_mosi	= S3C2410_GPB(9),
 	.num_chipselect	= 1,
 	.chip_select	= jive_wm8750_chipselect,
 };
@@ -480,7 +480,7 @@ static struct platform_device *jive_devices[] __initdata = {
 };
 
 static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
-	.vbus_pin	= S3C2410_GPG1,		/* detect is on GPG1 */
+	.vbus_pin	= S3C2410_GPG(1),		/* detect is on GPG1 */
 };
 
 /* Jive power management device */
@@ -530,8 +530,8 @@ static void jive_power_off(void)
 {
 	printk(KERN_INFO "powering system down...\n");
 
-	s3c2410_gpio_setpin(S3C2410_GPC5, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPC5, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
 }
 
 static void __init jive_machine_init(void)
@@ -635,22 +635,22 @@ static void __init jive_machine_init(void)
 
 	/* initialise the spi */
 
-	s3c2410_gpio_setpin(S3C2410_GPG13, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPG(13), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT);
 
-	s3c2410_gpio_setpin(S3C2410_GPB7, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPB7, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB(7), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(7), S3C2410_GPIO_OUTPUT);
 
-	s3c2410_gpio_setpin(S3C2410_GPB6, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPB6, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB(6), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT);
 
-	s3c2410_gpio_setpin(S3C2410_GPG8, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPG8, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPG(8), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT);
 
 	/* initialise the WM8750 spi */
 
-	s3c2410_gpio_setpin(S3C2410_GPH10, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH10, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPH(10), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(10), S3C2410_GPIO_OUTPUT);
 
 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 753aaedae55..9a5e4341972 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -85,10 +85,10 @@ static void smdk2413_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 	switch (cmd)
 	{
 		case S3C2410_UDC_P_ENABLE :
-			s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+			s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
 			break;
 		case S3C2410_UDC_P_DISABLE :
-			s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+			s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
 			break;
 		case S3C2410_UDC_P_RESET :
 			break;
@@ -135,8 +135,8 @@ static void __init smdk2413_machine_init(void)
 {	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
 
-	s3c2410_gpio_setpin(S3C2410_GPF2, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
 
 	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
 			      S3C2410_MISCCR_USBSUSPND0 |
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index d363b6f9000..68f3870991b 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -469,7 +469,7 @@ static void __init anubis_map_io(void)
 		anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
 	} else {
 		/* ensure that the GPIO is setup */
-		s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+		s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
 	}
 }
 
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 315c42e3127..dfc7010935d 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -166,7 +166,7 @@ static struct platform_device at2440evb_device_eth = {
 };
 
 static struct s3c24xx_mci_pdata at2440evb_mci_pdata = {
-	.gpio_detect	= S3C2410_GPG10,
+	.gpio_detect	= S3C2410_GPG(10),
 };
 
 /* 7" LCD panel */
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 4b2088cb05e..d43edede590 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -121,16 +121,16 @@ static struct platform_device *nexcoder_devices[] __initdata = {
 static void __init nexcoder_sensorboard_init(void)
 {
 	// Initialize SCCB bus
-	s3c2410_gpio_setpin(S3C2410_GPE14, 1); // IICSCL
-	s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_setpin(S3C2410_GPE15, 1); // IICSDA
-	s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL
+	s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA
+	s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
 
 	// Power up the sensor board
-	s3c2410_gpio_setpin(S3C2410_GPF1, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPF1, S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
-	s3c2410_gpio_setpin(S3C2410_GPF2, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
+	s3c2410_gpio_setpin(S3C2410_GPF(1), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
+	s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
 }
 
 static void __init nexcoder_map_io(void)
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index ad0fdc4a794..cba064b49a6 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -292,8 +292,8 @@ static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
 	__raw_writeb(tmp, OSIRIS_VA_CTRL0);
 
 	/* ensure that an nRESET is not generated on resume. */
-	s3c2410_gpio_setpin(S3C2410_GPA21, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
 
 	return 0;
 }
@@ -305,7 +305,7 @@ static int osiris_pm_resume(struct sys_device *sd)
 
 	__raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
 
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
 
 	return 0;
 }
@@ -385,7 +385,7 @@ static void __init osiris_map_io(void)
 		osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
 	} else {
 		/* write-protect line to the NAND */
-		s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+		s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
 	}
 
 	/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index fe658c48f72..aa119863c5c 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -48,27 +48,27 @@
 /* LED devices */
 
 static struct s3c24xx_led_platdata smdk_pdata_led4 = {
-	.gpio		= S3C2410_GPF4,
+	.gpio		= S3C2410_GPF(4),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led4",
 	.def_trigger	= "timer",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led5 = {
-	.gpio		= S3C2410_GPF5,
+	.gpio		= S3C2410_GPF(5),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led5",
 	.def_trigger	= "nand-disk",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led6 = {
-	.gpio		= S3C2410_GPF6,
+	.gpio		= S3C2410_GPF(6),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led6",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led7 = {
-	.gpio		= S3C2410_GPF7,
+	.gpio		= S3C2410_GPF(7),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led7",
 };
@@ -185,15 +185,15 @@ void __init smdk_machine_init(void)
 {
 	/* Configure the LEDs (even if we have no LED support)*/
 
-	s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT);
 
-	s3c2410_gpio_setpin(S3C2410_GPF4, 1);
-	s3c2410_gpio_setpin(S3C2410_GPF5, 1);
-	s3c2410_gpio_setpin(S3C2410_GPF6, 1);
-	s3c2410_gpio_setpin(S3C2410_GPF7, 1);
+	s3c2410_gpio_setpin(S3C2410_GPF(4), 1);
+	s3c2410_gpio_setpin(S3C2410_GPF(5), 1);
+	s3c2410_gpio_setpin(S3C2410_GPF(6), 1);
+	s3c2410_gpio_setpin(S3C2410_GPF(7), 1);
 
 	if (machine_is_smdk2443())
 		smdk_nand_info.twrph0 = 50;
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
index 65ebbaff7d5..ae0b9d6f3fb 100644
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -183,19 +183,19 @@ EXPORT_SYMBOL(s3c2410_modify_misccr);
 
 int s3c2410_gpio_getirq(unsigned int pin)
 {
-	if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15)
+	if (pin < S3C2410_GPF(0) || pin > S3C2410_GPG(15))
 		return -1;	/* not valid interrupts */
 
-	if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
+	if (pin < S3C2410_GPG(0) && pin > S3C2410_GPF(7))
 		return -1;	/* not valid pin */
 
-	if (pin < S3C2410_GPF4)
-		return (pin - S3C2410_GPF0) + IRQ_EINT0;
+	if (pin < S3C2410_GPF(4))
+		return (pin - S3C2410_GPF(0)) + IRQ_EINT0;
 
-	if (pin < S3C2410_GPG0)
-		return (pin - S3C2410_GPF4) + IRQ_EINT4;
+	if (pin < S3C2410_GPG(0))
+		return (pin - S3C2410_GPF(4)) + IRQ_EINT4;
 
-	return (pin - S3C2410_GPG0) + IRQ_EINT8;
+	return (pin - S3C2410_GPG(0)) + IRQ_EINT8;
 }
 
 EXPORT_SYMBOL(s3c2410_gpio_getirq);
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 60a9f724720..a82adc3c98a 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -82,7 +82,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 		.base	= S3C2410_GPACON,
 		.pm	= __gpio_pm(&s3c_gpio_pm_1bit),
 		.chip	= {
-			.base			= S3C2410_GPA0,
+			.base			= S3C2410_GPA(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOA",
 			.ngpio			= 24,
@@ -94,7 +94,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 		.base	= S3C2410_GPBCON,
 		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPB0,
+			.base			= S3C2410_GPB(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOB",
 			.ngpio			= 16,
@@ -104,7 +104,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 		.base	= S3C2410_GPCCON,
 		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPC0,
+			.base			= S3C2410_GPC(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOC",
 			.ngpio			= 16,
@@ -114,7 +114,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 		.base	= S3C2410_GPDCON,
 		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPD0,
+			.base			= S3C2410_GPD(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOD",
 			.ngpio			= 16,
@@ -124,7 +124,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 		.base	= S3C2410_GPECON,
 		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPE0,
+			.base			= S3C2410_GPE(0),
 			.label			= "GPIOE",
 			.owner			= THIS_MODULE,
 			.ngpio			= 16,
@@ -134,7 +134,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 		.base	= S3C2410_GPFCON,
 		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPF0,
+			.base			= S3C2410_GPF(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOF",
 			.ngpio			= 8,
@@ -145,7 +145,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 		.base	= S3C2410_GPGCON,
 		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPG0,
+			.base			= S3C2410_GPG(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOG",
 			.ngpio			= 10,
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 16aaf36b6e5..56e5253ca02 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -124,12 +124,12 @@ void s3c_pm_configure_extint(void)
 	 * and then configure it as an input if it is not
 	*/
 
-	for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
-		s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
+	for (pin = S3C2410_GPF(0); pin <= S3C2410_GPF(7); pin++) {
+		s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF(0));
 	}
 
-	for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
-		s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
+	for (pin = S3C2410_GPG(0); pin <= S3C2410_GPG(7); pin++) {
+		s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG(0))+8);
 	}
 }
 
diff --git a/arch/arm/plat-s3c24xx/setup-i2c.c b/arch/arm/plat-s3c24xx/setup-i2c.c
index e0d18530555..71a6accf114 100644
--- a/arch/arm/plat-s3c24xx/setup-i2c.c
+++ b/arch/arm/plat-s3c24xx/setup-i2c.c
@@ -21,6 +21,6 @@ struct platform_device;
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA);
-	s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL);
+	s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA);
+	s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL);
 }
diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
index 8b403cbb53d..9edf7894eed 100644
--- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
@@ -22,16 +22,16 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
 					  int enable)
 {
 	if (enable) {
-		s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPE13_SPICLK0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE12, S3C2410_GPE12_SPIMOSI0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPE11_SPIMISO0);
-		s3c2410_gpio_pullup(S3C2410_GPE11, 0);
-		s3c2410_gpio_pullup(S3C2410_GPE13, 0);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0);
+		s3c2410_gpio_pullup(S3C2410_GPE(11), 0);
+		s3c2410_gpio_pullup(S3C2410_GPE(13), 0);
 	} else {
-		s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPIO_INPUT);
-		s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPIO_INPUT);
-		s3c2410_gpio_pullup(S3C2410_GPE11, 1);
-		s3c2410_gpio_pullup(S3C2410_GPE12, 1);
-		s3c2410_gpio_pullup(S3C2410_GPE13, 1);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_pullup(S3C2410_GPE(11), 1);
+		s3c2410_gpio_pullup(S3C2410_GPE(12), 1);
+		s3c2410_gpio_pullup(S3C2410_GPE(13), 1);
 	}
 }
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
index 8fccd4e549f..f34d0fc69ad 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
@@ -22,16 +22,16 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
 				       int enable)
 {
 	if (enable) {
-		s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPG7_SPICLK1);
-		s3c2410_gpio_cfgpin(S3C2410_GPG6, S3C2410_GPG6_SPIMOSI1);
-		s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPG5_SPIMISO1);
-		s3c2410_gpio_pullup(S3C2410_GPG5, 0);
-		s3c2410_gpio_pullup(S3C2410_GPG6, 0);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1);
+		s3c2410_gpio_pullup(S3C2410_GPG(5), 0);
+		s3c2410_gpio_pullup(S3C2410_GPG(6), 0);
 	} else {
-		s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPIO_INPUT);
-		s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPIO_INPUT);
-		s3c2410_gpio_pullup(S3C2410_GPG5, 1);
-		s3c2410_gpio_pullup(S3C2410_GPG6, 1);
-		s3c2410_gpio_pullup(S3C2410_GPG7, 1);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_pullup(S3C2410_GPG(5), 1);
+		s3c2410_gpio_pullup(S3C2410_GPG(6), 1);
+		s3c2410_gpio_pullup(S3C2410_GPG(7), 1);
 	}
 }
-- 
cgit v1.2.3


From fa7a7883fe5c647decee57a9c1b86a96408c5b26 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Tue, 10 Mar 2009 23:57:26 +0000
Subject: [ARM] S3C64XX: DMA support

Add support for the DMA blocks in the S3C64XX series of CPUS,
which are based on the ARM PL080 PrimeCell system.

Unfortunately, these DMA controllers diverge from the PL080
design by adding another DMA controller register and
configuration for OneNAND.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/include/asm/hardware/pl080.h         | 138 +++++
 arch/arm/mach-s3c6400/include/mach/dma.h      |  59 ++-
 arch/arm/plat-s3c64xx/Kconfig                 |   4 +
 arch/arm/plat-s3c64xx/Makefile                |   4 +
 arch/arm/plat-s3c64xx/dma.c                   | 722 ++++++++++++++++++++++++++
 arch/arm/plat-s3c64xx/include/plat/dma-plat.h |  70 +++
 6 files changed, 996 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/include/asm/hardware/pl080.h
 create mode 100644 arch/arm/plat-s3c64xx/dma.c
 create mode 100644 arch/arm/plat-s3c64xx/include/plat/dma-plat.h

diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h
new file mode 100644
index 00000000000..6a6c66be7f6
--- /dev/null
+++ b/arch/arm/include/asm/hardware/pl080.h
@@ -0,0 +1,138 @@
+/* arch/arm/include/asm/hardware/pl080.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * ARM PrimeCell PL080 DMA controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Note, there are some Samsung updates to this controller block which
+ * make it not entierly compatible with the PL080 specification from
+ * ARM. When in doubt, check the Samsung documentation first.
+ *
+ * The Samsung defines are PL080S, and add an extra controll register,
+ * the ability to move more than 2^11 counts of data and some extra
+ * OneNAND features.
+*/
+
+#define PL080_INT_STATUS			(0x00)
+#define PL080_TC_STATUS				(0x04)
+#define PL080_TC_CLEAR				(0x08)
+#define PL080_ERR_STATUS			(0x0C)
+#define PL080_ERR_CLEAR				(0x10)
+#define PL080_RAW_TC_STATUS			(0x14)
+#define PL080_RAW_ERR_STATUS			(0x18)
+#define PL080_EN_CHAN				(0x1c)
+#define PL080_SOFT_BREQ				(0x20)
+#define PL080_SOFT_SREQ				(0x24)
+#define PL080_SOFT_LBREQ			(0x28)
+#define PL080_SOFT_LSREQ			(0x2C)
+
+#define PL080_CONFIG				(0x30)
+#define PL080_CONFIG_M2_BE			(1 << 2)
+#define PL080_CONFIG_M1_BE			(1 << 1)
+#define PL080_CONFIG_ENABLE			(1 << 0)
+
+#define PL080_SYNC				(0x34)
+
+/* Per channel configuration registers */
+
+#define PL008_Cx_STRIDE				(0x20)
+#define PL080_Cx_BASE(x)			((0x100 + (x * 0x20)))
+#define PL080_Cx_SRC_ADDR(x)			((0x100 + (x * 0x20)))
+#define PL080_Cx_DST_ADDR(x)			((0x104 + (x * 0x20)))
+#define PL080_Cx_LLI(x)				((0x108 + (x * 0x20)))
+#define PL080_Cx_CONTROL(x)			((0x10C + (x * 0x20)))
+#define PL080_Cx_CONFIG(x)			((0x110 + (x * 0x20)))
+#define PL080S_Cx_CONTROL2(x)			((0x110 + (x * 0x20)))
+#define PL080S_Cx_CONFIG(x)			((0x114 + (x * 0x20)))
+
+#define PL080_CH_SRC_ADDR			(0x00)
+#define PL080_CH_DST_ADDR			(0x04)
+#define PL080_CH_LLI				(0x08)
+#define PL080_CH_CONTROL			(0x0C)
+#define PL080_CH_CONFIG				(0x10)
+#define PL080S_CH_CONTROL2			(0x10)
+#define PL080S_CH_CONFIG			(0x14)
+
+#define PL080_LLI_ADDR_MASK			(0x3fffffff << 2)
+#define PL080_LLI_ADDR_SHIFT			(2)
+#define PL080_LLI_LM_AHB2			(1 << 0)
+
+#define PL080_CONTROL_TC_IRQ_EN			(1 << 31)
+#define PL080_CONTROL_PROT_MASK			(0x7 << 28)
+#define PL080_CONTROL_PROT_SHIFT		(28)
+#define PL080_CONTROL_PROT_SYS			(1 << 28)
+#define PL080_CONTROL_DST_INCR			(1 << 27)
+#define PL080_CONTROL_SRC_INCR			(1 << 26)
+#define PL080_CONTROL_DST_AHB2			(1 << 25)
+#define PL080_CONTROL_SRC_AHB2			(1 << 24)
+#define PL080_CONTROL_DWIDTH_MASK		(0x7 << 21)
+#define PL080_CONTROL_DWIDTH_SHIFT		(21)
+#define PL080_CONTROL_SWIDTH_MASK		(0x7 << 18)
+#define PL080_CONTROL_SWIDTH_SHIFT		(18)
+#define PL080_CONTROL_DB_SIZE_MASK		(0x7 << 15)
+#define PL080_CONTROL_DB_SIZE_SHIFT		(15)
+#define PL080_CONTROL_SB_SIZE_MASK		(0x7 << 12)
+#define PL080_CONTROL_SB_SIZE_SHIFT		(12)
+#define PL080_CONTROL_TRANSFER_SIZE_MASK	(0xfff << 0)
+#define PL080_CONTROL_TRANSFER_SIZE_SHIFT	(0)
+
+#define PL080_BSIZE_1				(0x0)
+#define PL080_BSIZE_4				(0x1)
+#define PL080_BSIZE_8				(0x2)
+#define PL080_BSIZE_16				(0x3)
+#define PL080_BSIZE_32				(0x4)
+#define PL080_BSIZE_64				(0x5)
+#define PL080_BSIZE_128				(0x6)
+#define PL080_BSIZE_256				(0x7)
+
+#define PL080_WIDTH_8BIT			(0x0)
+#define PL080_WIDTH_16BIT			(0x1)
+#define PL080_WIDTH_32BIT			(0x2)
+
+#define PL080_CONFIG_HALT			(1 << 18)
+#define PL080_CONFIG_ACTIVE			(1 << 17)  /* RO */
+#define PL080_CONFIG_LOCK			(1 << 16)
+#define PL080_CONFIG_TC_IRQ_MASK		(1 << 15)
+#define PL080_CONFIG_ERR_IRQ_MASK		(1 << 14)
+#define PL080_CONFIG_FLOW_CONTROL_MASK		(0x7 << 11)
+#define PL080_CONFIG_FLOW_CONTROL_SHIFT		(11)
+#define PL080_CONFIG_DST_SEL_MASK		(0xf << 6)
+#define PL080_CONFIG_DST_SEL_SHIFT		(6)
+#define PL080_CONFIG_SRC_SEL_MASK		(0xf << 1)
+#define PL080_CONFIG_SRC_SEL_SHIFT		(1)
+#define PL080_CONFIG_ENABLE			(1 << 0)
+
+#define PL080_FLOW_MEM2MEM			(0x0)
+#define PL080_FLOW_MEM2PER			(0x1)
+#define PL080_FLOW_PER2MEM			(0x2)
+#define PL080_FLOW_SRC2DST			(0x3)
+#define PL080_FLOW_SRC2DST_DST			(0x4)
+#define PL080_FLOW_MEM2PER_PER			(0x5)
+#define PL080_FLOW_PER2MEM_PER			(0x6)
+#define PL080_FLOW_SRC2DST_SRC			(0x7)
+
+/* DMA linked list chain structure */
+
+struct pl080_lli {
+	u32	src_addr;
+	u32	dst_addr;
+	u32	next_lli;
+	u32	control0;
+};
+
+struct pl080s_lli {
+	u32	src_addr;
+	u32	dst_addr;
+	u32	next_lli;
+	u32	control0;
+	u32	control1;
+};
+
diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h
index 9771ac2cb07..1067619f0ba 100644
--- a/arch/arm/mach-s3c6400/include/mach/dma.h
+++ b/arch/arm/mach-s3c6400/include/mach/dma.h
@@ -11,6 +11,63 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H __FILE__
 
-/* currently nothing here, placeholder */
+#define S3C_DMA_CHANNELS	(16)
+
+/* see mach-s3c2410/dma.h for notes on dma channel numbers */
+
+/* Note, for the S3C64XX architecture we keep the DMACH_
+ * defines in the order they are allocated to [S]DMA0/[S]DMA1
+ * so that is easy to do DHACH_ -> DMA controller conversion
+ */
+enum dma_ch {
+	/* DMA0/SDMA0 */
+	DMACH_UART0 = 0,
+	DMACH_UART0_SRC2,
+	DMACH_UART1,
+	DMACH_UART1_SRC2,
+	DMACH_UART2,
+	DMACH_UART2_SRC2,
+	DMACH_UART3,
+	DMACH_UART3_SRC2,
+	DMACH_PCM0_TX,
+	DMACH_PCM0_RX,
+	DMACH_I2S0_OUT,
+	DMACH_I2S0_IN,
+	DMACH_SPI0_TX,
+	DMACH_SPI0_RX,
+	DMACH_HSI_I2SV40_TX,
+	DMACH_HSI_I2SV40_RX,
+
+	/* DMA1/SDMA1 */
+	DMACH_PCM1_TX = 16,
+	DMACH_PCM1_RX,
+	DMACH_I2S1_OUT,
+	DMACH_I2S1_IN,
+	DMACH_SPI1_TX,
+	DMACH_SPI1_RX,
+	DMACH_AC97_PCMOUT,
+	DMACH_AC97_PCMIN,
+	DMACH_AC97_MICIN,
+	DMACH_PWM,
+	DMACH_IRDA,
+	DMACH_EXTERNAL,
+	DMACH_RES1,
+	DMACH_RES2,
+	DMACH_SECURITY_RX,	/* SDMA1 only */
+	DMACH_SECURITY_TX,	/* SDMA1 only */
+	DMACH_MAX		/* the end */
+};
+
+static __inline__ int s3c_dma_has_circular(void)
+{
+	/* we will be supporting ciruclar buffers as soon as we have DMA
+	 * engine support.
+	 */
+	return 1;
+}
+
+#define S3C2410_DMAF_CIRCULAR		(1 << 0)
+
+#include <plat/dma.h>
 
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
index 54375a00a7d..9ce66151fd9 100644
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -38,6 +38,10 @@ config CPU_S3C6400_CLOCK
 	  Common clock support code for the S3C6400 that is shared
 	  by other CPUs in the series, such as the S3C6410.
 
+config S3C64XX_DMA
+	bool "S3C64XX DMA"
+	select S3C_DMA
+
 # platform specific device setup
 
 config S3C64XX_SETUP_I2C0
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
index 2e6d79bf8f3..61bdb67e2f6 100644
--- a/arch/arm/plat-s3c64xx/Makefile
+++ b/arch/arm/plat-s3c64xx/Makefile
@@ -24,6 +24,10 @@ obj-y				+= gpiolib.o
 obj-$(CONFIG_CPU_S3C6400_INIT)	+= s3c6400-init.o
 obj-$(CONFIG_CPU_S3C6400_CLOCK)	+= s3c6400-clock.o
 
+# DMA support
+
+obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
+
 # Device setup
 
 obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c
new file mode 100644
index 00000000000..1c0f51cbcd8
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/dma.c
@@ -0,0 +1,722 @@
+/* linux/arch/arm/plat-s3c64xx/dma.c
+ *
+ * Copyright 2009 Openmoko, Inc.
+ * Copyright 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX DMA core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/dmapool.h>
+#include <linux/sysdev.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/dma-plat.h>
+#include <plat/regs-sys.h>
+
+#include <asm/hardware/pl080.h>
+
+/* dma channel state information */
+
+struct s3c64xx_dmac {
+	struct sys_device	 sysdev;
+	struct clk		*clk;
+	void __iomem		*regs;
+	struct s3c2410_dma_chan *channels;
+	enum dma_ch		 chanbase;
+};
+
+/* pool to provide LLI buffers */
+static struct dma_pool *dma_pool;
+
+/* Debug configuration and code */
+
+static unsigned char debug_show_buffs = 0;
+
+static void dbg_showchan(struct s3c2410_dma_chan *chan)
+{
+	pr_debug("DMA%d: %08x->%08x L %08x C %08x,%08x S %08x\n",
+		 chan->number,
+		 readl(chan->regs + PL080_CH_SRC_ADDR),
+		 readl(chan->regs + PL080_CH_DST_ADDR),
+		 readl(chan->regs + PL080_CH_LLI),
+		 readl(chan->regs + PL080_CH_CONTROL),
+		 readl(chan->regs + PL080S_CH_CONTROL2),
+		 readl(chan->regs + PL080S_CH_CONFIG));
+}
+
+static void show_lli(struct pl080s_lli *lli)
+{
+	pr_debug("LLI[%p] %08x->%08x, NL %08x C %08x,%08x\n",
+		 lli, lli->src_addr, lli->dst_addr, lli->next_lli,
+		 lli->control0, lli->control1);
+}
+
+static void dbg_showbuffs(struct s3c2410_dma_chan *chan)
+{
+	struct s3c64xx_dma_buff *ptr;
+	struct s3c64xx_dma_buff *end;
+
+	pr_debug("DMA%d: buffs next %p, curr %p, end %p\n",
+		 chan->number, chan->next, chan->curr, chan->end);
+
+	ptr = chan->next;
+	end = chan->end;
+
+	if (debug_show_buffs) {
+		for (; ptr != NULL; ptr = ptr->next) {
+			pr_debug("DMA%d: %08x ",
+				 chan->number, ptr->lli_dma);
+			show_lli(ptr->lli);
+		}
+	}
+}
+
+/* End of Debug */
+
+static struct s3c2410_dma_chan *s3c64xx_dma_map_channel(unsigned int channel)
+{
+	struct s3c2410_dma_chan *chan;
+	unsigned int start, offs;
+
+	start = 0;
+
+	if (channel >= DMACH_PCM1_TX)
+		start = 8;
+
+	for (offs = 0; offs < 8; offs++) {
+		chan = &s3c2410_chans[start + offs];
+		if (!chan->in_use)
+			goto found;
+	}
+
+	return NULL;
+
+found:
+	s3c_dma_chan_map[channel] = chan;
+	return chan;
+}
+
+int s3c2410_dma_config(unsigned int channel, int xferunit)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	switch (xferunit) {
+	case 1:
+		chan->hw_width = 0;
+		break;
+	case 2:
+		chan->hw_width = 1;
+		break;
+	case 4:
+		chan->hw_width = 2;
+		break;
+	default:
+		printk(KERN_ERR "%s: illegal width %d\n", __func__, xferunit);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_config);
+
+static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
+				 struct pl080s_lli *lli,
+				 dma_addr_t data, int size)
+{
+	dma_addr_t src, dst;
+	u32 control0, control1;
+
+	switch (chan->source) {
+	case S3C2410_DMASRC_HW:
+		src = chan->dev_addr;
+		dst = data;
+		control0 = PL080_CONTROL_SRC_AHB2;
+		control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
+		control0 |= 2 << PL080_CONTROL_DWIDTH_SHIFT;
+		control0 |= PL080_CONTROL_DST_INCR;
+		break;
+
+	case S3C2410_DMASRC_MEM:
+		src = data;
+		dst = chan->dev_addr;
+		control0 = PL080_CONTROL_DST_AHB2;
+		control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
+		control0 |= 2 << PL080_CONTROL_SWIDTH_SHIFT;
+		control0 |= PL080_CONTROL_SRC_INCR;
+		break;
+	default:
+		BUG();
+	}
+
+	/* note, we do not currently setup any of the burst controls */
+
+	control1 = size >> chan->hw_width;	/* size in no of xfers */
+	control0 |= PL080_CONTROL_PROT_SYS;	/* always in priv. mode */
+	control0 |= PL080_CONTROL_TC_IRQ_EN;	/* always fire IRQ */
+
+	lli->src_addr = src;
+	lli->dst_addr = dst;
+	lli->next_lli = 0;
+	lli->control0 = control0;
+	lli->control1 = control1;
+}
+
+static void s3c64xx_lli_to_regs(struct s3c2410_dma_chan *chan,
+				struct pl080s_lli *lli)
+{
+	void __iomem *regs = chan->regs;
+
+	pr_debug("%s: LLI %p => regs\n", __func__, lli);
+	show_lli(lli);
+
+	writel(lli->src_addr, regs + PL080_CH_SRC_ADDR);
+	writel(lli->dst_addr, regs + PL080_CH_DST_ADDR);
+	writel(lli->next_lli, regs + PL080_CH_LLI);
+	writel(lli->control0, regs + PL080_CH_CONTROL);
+	writel(lli->control1, regs + PL080S_CH_CONTROL2);
+}
+
+static int s3c64xx_dma_start(struct s3c2410_dma_chan *chan)
+{
+	struct s3c64xx_dmac *dmac = chan->dmac;
+	u32 config;
+	u32 bit = chan->bit;
+
+	dbg_showchan(chan);
+
+	pr_debug("%s: clearing interrupts\n", __func__);
+
+	/* clear interrupts */
+	writel(bit, dmac->regs + PL080_TC_CLEAR);
+	writel(bit, dmac->regs + PL080_ERR_CLEAR);
+
+	pr_debug("%s: starting channel\n", __func__);
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config |= PL080_CONFIG_ENABLE;
+
+	pr_debug("%s: writing config %08x\n", __func__, config);
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	return 0;
+}
+
+static int s3c64xx_dma_stop(struct s3c2410_dma_chan *chan)
+{
+	u32 config;
+	int timeout;
+
+	pr_debug("%s: stopping channel\n", __func__);
+
+	dbg_showchan(chan);
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config |= PL080_CONFIG_HALT;
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	timeout = 1000;
+	do {
+		config = readl(chan->regs + PL080S_CH_CONFIG);
+		pr_debug("%s: %d - config %08x\n", __func__, timeout, config);
+		if (config & PL080_CONFIG_ACTIVE)
+			udelay(10);
+		else
+			break;
+		} while (--timeout > 0);
+
+	if (config & PL080_CONFIG_ACTIVE) {
+		printk(KERN_ERR "%s: channel still active\n", __func__);
+		return -EFAULT;
+	}
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config &= ~PL080_CONFIG_ENABLE;
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	return 0;
+}
+
+static inline void s3c64xx_dma_bufffdone(struct s3c2410_dma_chan *chan,
+					 struct s3c64xx_dma_buff *buf,
+					 enum s3c2410_dma_buffresult result)
+{
+	if (chan->callback_fn != NULL)
+		(chan->callback_fn)(chan, buf->pw, 0, result);
+}
+
+static void s3c64xx_dma_freebuff(struct s3c64xx_dma_buff *buff)
+{
+	dma_pool_free(dma_pool, buff->lli, buff->lli_dma);
+	kfree(buff);
+}
+
+static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan)
+{
+	struct s3c64xx_dma_buff *buff, *next;
+	u32 config;
+
+	dbg_showchan(chan);
+
+	pr_debug("%s: flushing channel\n", __func__);
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config &= ~PL080_CONFIG_ENABLE;
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	/* dump all the buffers associated with this channel */
+
+	for (buff = chan->curr; buff != NULL; buff = next) {
+		next = buff->next;
+		pr_debug("%s: buff %p (next %p)\n", __func__, buff, buff->next);
+
+		s3c64xx_dma_bufffdone(chan, buff, S3C2410_RES_ABORT);
+		s3c64xx_dma_freebuff(buff);
+	}
+
+	chan->curr = chan->next = chan->end = NULL;
+
+	return 0;
+}
+
+int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	switch (op) {
+	case S3C2410_DMAOP_START:
+		return s3c64xx_dma_start(chan);
+
+	case S3C2410_DMAOP_STOP:
+		return s3c64xx_dma_stop(chan);
+
+	case S3C2410_DMAOP_FLUSH:
+		return s3c64xx_dma_flush(chan);
+
+	/* belive PAUSE/RESUME are no-ops */
+	case S3C2410_DMAOP_PAUSE:
+	case S3C2410_DMAOP_RESUME:
+	case S3C2410_DMAOP_STARTED:
+	case S3C2410_DMAOP_TIMEOUT:
+		return 0;
+	}
+
+	return -ENOENT;
+}
+EXPORT_SYMBOL(s3c2410_dma_ctrl);
+
+/* s3c2410_dma_enque
+ *
+ */
+
+int s3c2410_dma_enqueue(unsigned int channel, void *id,
+			dma_addr_t data, int size)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	struct s3c64xx_dma_buff *next;
+	struct s3c64xx_dma_buff *buff;
+	struct pl080s_lli *lli;
+	int ret;
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_KERNEL);
+	if (!buff) {
+		printk(KERN_ERR "%s: no memory for buffer\n", __func__);
+		return -ENOMEM;
+	}
+
+	lli = dma_pool_alloc(dma_pool, GFP_KERNEL, &buff->lli_dma);
+	if (!lli) {
+		printk(KERN_ERR "%s: no memory for lli\n", __func__);
+		ret = -ENOMEM;
+		goto err_buff;
+	}
+
+	pr_debug("%s: buff %p, dp %08x lli (%p, %08x) %d\n",
+		 __func__, buff, data, lli, (u32)buff->lli_dma, size);
+
+	buff->lli = lli;
+	buff->pw = id;
+
+	s3c64xx_dma_fill_lli(chan, lli, data, size);
+
+	if ((next = chan->next) != NULL) {
+		struct s3c64xx_dma_buff *end = chan->end;
+		struct pl080s_lli *endlli = end->lli;
+
+		pr_debug("enquing onto channel\n");
+
+		end->next = buff;
+		endlli->next_lli = buff->lli_dma;
+
+		if (chan->flags & S3C2410_DMAF_CIRCULAR) {
+			struct s3c64xx_dma_buff *curr = chan->curr;
+			lli->next_lli = curr->lli_dma;
+		}
+
+		if (next == chan->curr) {
+			writel(buff->lli_dma, chan->regs + PL080_CH_LLI);
+			chan->next = buff;
+		}
+
+		show_lli(endlli);
+		chan->end = buff;
+	} else {
+		pr_debug("enquing onto empty channel\n");
+
+		chan->curr = buff;
+		chan->next = buff;
+		chan->end = buff;
+
+		s3c64xx_lli_to_regs(chan, lli);
+	}
+
+	show_lli(lli);
+
+	dbg_showchan(chan);
+	dbg_showbuffs(chan);
+	return 0;
+
+err_buff:
+	kfree(buff);
+	return ret;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_enqueue);
+
+
+int s3c2410_dma_devconfig(int channel,
+			  enum s3c2410_dmasrc source,
+			  unsigned long devaddr)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	u32 peripheral;
+	u32 config = 0;
+
+	printk("%s: channel %d, source %d, dev %08lx, chan %p\n",
+		 __func__, channel, source, devaddr, chan);
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	peripheral = (chan->peripheral & 0xf);
+	chan->source = source;
+	chan->dev_addr = devaddr;
+
+	pr_debug("%s: peripheral %d\n", __func__, peripheral);
+
+	switch (source) {
+	case S3C2410_DMASRC_HW:
+		config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+		config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
+		break;
+	case S3C2410_DMASRC_MEM:
+		config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+		config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
+		break;
+	default:
+		printk(KERN_ERR "%s: bad source\n", __func__);
+		return -EINVAL;
+	}
+
+	/* allow TC and ERR interrupts */
+	config |= PL080_CONFIG_TC_IRQ_MASK;
+	config |= PL080_CONFIG_ERR_IRQ_MASK;
+
+	pr_debug("%s: config %08x\n", __func__, config);
+
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_devconfig);
+
+
+int s3c2410_dma_getposition(unsigned int channel,
+			    dma_addr_t *src, dma_addr_t *dst)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	if (src != NULL)
+		*src = readl(chan->regs + PL080_CH_SRC_ADDR);
+
+	if (dst != NULL)
+		*dst = readl(chan->regs + PL080_CH_DST_ADDR);
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_getposition);
+
+/* s3c2410_request_dma
+ *
+ * get control of an dma channel
+*/
+
+int s3c2410_dma_request(unsigned int channel,
+			struct s3c2410_dma_client *client,
+			void *dev)
+{
+	struct s3c2410_dma_chan *chan;
+	unsigned long flags;
+
+	pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
+		 channel, client->name, dev);
+
+	local_irq_save(flags);
+
+	chan = s3c64xx_dma_map_channel(channel);
+	if (chan == NULL) {
+		local_irq_restore(flags);
+		return -EBUSY;
+	}
+
+	dbg_showchan(chan);
+
+	chan->client = client;
+	chan->in_use = 1;
+	chan->peripheral = channel;
+
+	local_irq_restore(flags);
+
+	/* need to setup */
+
+	pr_debug("%s: channel initialised, %p\n", __func__, chan);
+
+	return chan->number | DMACH_LOW_LEVEL;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_request);
+
+/* s3c2410_dma_free
+ *
+ * release the given channel back to the system, will stop and flush
+ * any outstanding transfers, and ensure the channel is ready for the
+ * next claimant.
+ *
+ * Note, although a warning is currently printed if the freeing client
+ * info is not the same as the registrant's client info, the free is still
+ * allowed to go through.
+*/
+
+int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	unsigned long flags;
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	local_irq_save(flags);
+
+	if (chan->client != client) {
+		printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
+		       channel, chan->client, client);
+	}
+
+	/* sort out stopping and freeing the channel */
+
+
+	chan->client = NULL;
+	chan->in_use = 0;
+
+	if (!(channel & DMACH_LOW_LEVEL))
+		s3c_dma_chan_map[channel] = NULL;
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_free);
+
+
+static void s3c64xx_dma_tcirq(struct s3c64xx_dmac *dmac, int offs)
+{
+	struct s3c2410_dma_chan *chan = dmac->channels + offs;
+
+	/* note, we currently do not bother to work out which buffer
+	 * or buffers have been completed since the last tc-irq. */
+
+	if (chan->callback_fn)
+		(chan->callback_fn)(chan, chan->curr->pw, 0, S3C2410_RES_OK);
+}
+
+static void s3c64xx_dma_errirq(struct s3c64xx_dmac *dmac, int offs)
+{
+	printk(KERN_DEBUG "%s: offs %d\n", __func__, offs);
+}
+
+static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
+{
+	struct s3c64xx_dmac *dmac = pw;
+	u32 tcstat, errstat;
+	u32 bit;
+	int offs;
+
+	tcstat = readl(dmac->regs + PL080_TC_STATUS);
+	errstat = readl(dmac->regs + PL080_ERR_STATUS);
+
+	for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) {
+		if (tcstat & bit) {
+			writel(bit, dmac->regs + PL080_TC_CLEAR);
+			s3c64xx_dma_tcirq(dmac, offs);
+		}
+
+		if (errstat & bit) {
+			s3c64xx_dma_errirq(dmac, offs);
+			writel(bit, dmac->regs + PL080_ERR_CLEAR);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct sysdev_class dma_sysclass = {
+	.name		= "s3c64xx-dma",
+};
+
+static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
+			     int irq, unsigned int base)
+{
+	struct s3c2410_dma_chan *chptr = &s3c2410_chans[chno];
+	struct s3c64xx_dmac *dmac;
+	char clkname[16];
+	void __iomem *regs;
+	void __iomem *regptr;
+	int err, ch;
+
+	dmac = kzalloc(sizeof(struct s3c64xx_dmac), GFP_KERNEL);
+	if (!dmac) {
+		printk(KERN_ERR "%s: failed to alloc mem\n", __func__);
+		return -ENOMEM;
+	}
+
+	dmac->sysdev.id = chno / 8;
+	dmac->sysdev.cls = &dma_sysclass;
+
+	err = sysdev_register(&dmac->sysdev);
+	if (err) {
+		printk(KERN_ERR "%s: failed to register sysdevice\n", __func__);
+		goto err_alloc;
+	}
+
+	regs = ioremap(base, 0x200);
+	if (!regs) {
+		printk(KERN_ERR "%s: failed to ioremap()\n", __func__);
+		err = -ENXIO;
+		goto err_dev;
+	}
+
+	snprintf(clkname, sizeof(clkname), "dma%d", dmac->sysdev.id);
+
+	dmac->clk = clk_get(NULL, clkname);
+	if (IS_ERR(dmac->clk)) {
+		printk(KERN_ERR "%s: failed to get clock %s\n", __func__, clkname);
+		err = PTR_ERR(dmac->clk);
+		goto err_map;
+	}
+
+	clk_enable(dmac->clk);
+
+	dmac->regs = regs;
+	dmac->chanbase = chbase;
+	dmac->channels = chptr;
+
+	err = request_irq(irq, s3c64xx_dma_irq, 0, "DMA", dmac);
+	if (err < 0) {
+		printk(KERN_ERR "%s: failed to get irq\n", __func__);
+		goto err_clk;
+	}
+
+	regptr = regs + PL080_Cx_BASE(0);
+
+	for (ch = 0; ch < 8; ch++, chno++, chptr++) {
+		printk(KERN_INFO "%s: registering DMA %d (%p)\n",
+		       __func__, chno, regptr);
+
+		chptr->bit = 1 << ch;
+		chptr->number = chno;
+		chptr->dmac = dmac;
+		chptr->regs = regptr;
+		regptr += PL008_Cx_STRIDE;
+	}
+
+	/* for the moment, permanently enable the controller */
+	writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG);
+
+	printk(KERN_INFO "PL080: IRQ %d, at %p\n", irq, regs);
+
+	return 0;
+
+err_clk:
+	clk_disable(dmac->clk);
+	clk_put(dmac->clk);
+err_map:
+	iounmap(regs);
+err_dev:
+	sysdev_unregister(&dmac->sysdev);
+err_alloc:
+	kfree(dmac);
+	return err;
+}
+
+static int __init s3c64xx_dma_init(void)
+{
+	int ret;
+
+	printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
+
+	dma_pool = dma_pool_create("DMA-LLI", NULL, 32, 16, 0);
+	if (!dma_pool) {
+		printk(KERN_ERR "%s: failed to create pool\n", __func__);
+		return -ENOMEM;
+	}
+
+	ret = sysdev_class_register(&dma_sysclass);
+	if (ret) {
+		printk(KERN_ERR "%s: failed to create sysclass\n", __func__);
+		return -ENOMEM;
+	}
+
+	/* Set all DMA configuration to be DMA, not SDMA */
+	writel(0xffffff, S3C_SYSREG(0x110));
+
+	/* Register standard DMA controlers */
+	s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
+	s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000);
+
+	return 0;
+}
+
+arch_initcall(s3c64xx_dma_init);
diff --git a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
new file mode 100644
index 00000000000..0c30dd98672
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
@@ -0,0 +1,70 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
+ *
+ * Copyright 2009 Openmoko, Inc.
+ * Copyright 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX DMA core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
+
+struct s3c64xx_dma_buff;
+
+/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
+ * @next: Pointer to next buffer in queue or ring.
+ * @pw: Client provided identifier
+ * @lli: Pointer to hardware descriptor this buffer is associated with.
+ * @lli_dma: Hardare address of the descriptor.
+ */
+struct s3c64xx_dma_buff {
+	struct s3c64xx_dma_buff *next;
+
+	void			*pw;
+	struct pl080_lli	*lli;
+	dma_addr_t		 lli_dma;
+};
+
+struct s3c64xx_dmac;
+
+struct s3c2410_dma_chan {
+	unsigned char		 number;      /* number of this dma channel */
+	unsigned char		 in_use;      /* channel allocated */
+	unsigned char		 bit;	      /* bit for enable/disable/etc */
+	unsigned char		 hw_width;
+	unsigned char		 peripheral;
+
+	unsigned int		 flags;
+	enum s3c2410_dmasrc	 source;
+
+
+	dma_addr_t		dev_addr;
+
+	struct s3c2410_dma_client *client;
+	struct s3c64xx_dmac	*dmac;		/* pointer to controller */
+
+	void __iomem		*regs;
+
+	/* cdriver callbacks */
+	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
+	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
+
+	/* buffer list and information */
+	struct s3c64xx_dma_buff	*curr;		/* current dma buffer */
+	struct s3c64xx_dma_buff	*next;		/* next buffer to load */
+	struct s3c64xx_dma_buff	*end;		/* end of queue */
+
+	/* note, when channel is running in circular mode, curr is the
+	 * first buffer enqueued, end is the last and curr is where the
+	 * last buffer-done event is set-at. The buffers are not freed
+	 * and the last buffer hardware descriptor points back to the
+	 * first.
+	 */
+};
+
+#include <plat/dma-core.h>
-- 
cgit v1.2.3


From 0b13406a1f1928ec71e81dde52cb62d72ffd28ef Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Thu, 30 Apr 2009 14:58:40 +0100
Subject: [ARM] S3C64XX: Lower severity of DMA logging

The message was missing a severity macro so pick pr_debug().

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c
index 1c0f51cbcd8..67aa93dbb69 100644
--- a/arch/arm/plat-s3c64xx/dma.c
+++ b/arch/arm/plat-s3c64xx/dma.c
@@ -419,7 +419,7 @@ int s3c2410_dma_devconfig(int channel,
 	u32 peripheral;
 	u32 config = 0;
 
-	printk("%s: channel %d, source %d, dev %08lx, chan %p\n",
+	pr_debug("%s: channel %d, source %d, dev %08lx, chan %p\n",
 		 __func__, channel, source, devaddr, chan);
 
 	WARN_ON(!chan);
-- 
cgit v1.2.3


From 373e9644c5f557bc8992036f9a9281e9d98aef40 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 18 May 2009 19:40:18 +0100
Subject: [ARM] S3C24XX: GPIO: Fix error returns from gpio functions

Several GPIO functions have been returning -1 to indicate
an error instead of returning a proper error code. Change
to return -EINVAL for invalid argument(s).

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2400/gpio.c | 4 ++--
 arch/arm/mach-s3c2410/gpio.c | 2 +-
 arch/arm/plat-s3c24xx/gpio.c | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-s3c2400/gpio.c b/arch/arm/mach-s3c2400/gpio.c
index 81ebe2f0990..6c68e78f359 100644
--- a/arch/arm/mach-s3c2400/gpio.c
+++ b/arch/arm/mach-s3c2400/gpio.c
@@ -33,8 +33,8 @@
 
 int s3c2400_gpio_getirq(unsigned int pin)
 {
-	if (pin < S3C2410_GPE(0) || pin > S3C2400_GPE7_EINT7)
-		return -1;  /* not valid interrupts */
+	if (pin < S3C2410_GPE(0) || pin > S3C2400_GPE(7))
+		return -EINVAL;  /* not valid interrupts */
 
 	return (pin - S3C2410_GPE(0)) + IRQ_EINT0;
 }
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index bf7fbfe7e4d..7974afca297 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -40,7 +40,7 @@ int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
 	unsigned long val;
 
 	if (pin < S3C2410_GPG(8) || pin > S3C2410_GPG(15))
-		return -1;
+		return -EINVAL;
 
 	config &= 0xff;
 
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
index ae0b9d6f3fb..95df059b5a1 100644
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -184,10 +184,10 @@ EXPORT_SYMBOL(s3c2410_modify_misccr);
 int s3c2410_gpio_getirq(unsigned int pin)
 {
 	if (pin < S3C2410_GPF(0) || pin > S3C2410_GPG(15))
-		return -1;	/* not valid interrupts */
+		return -EINVAL;	/* not valid interrupts */
 
 	if (pin < S3C2410_GPG(0) && pin > S3C2410_GPF(7))
-		return -1;	/* not valid pin */
+		return -EINVAL;	/* not valid pin */
 
 	if (pin < S3C2410_GPF(4))
 		return (pin - S3C2410_GPF(0)) + IRQ_EINT0;
-- 
cgit v1.2.3


From 9c0ec95797052af84b7579e2a00ea212cebf71a8 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 18 May 2009 20:03:23 +0100
Subject: [ARM] S3C24XX: GPIO: Move gpiolib initialisation earlier

The arch_initcall() is too late for board initialisation to use
gpiolib when doing their machine specific initilisation via the
.init_machine callback.

Bring the file into line with the s3c64xx implementation and use
the core_initcall() to register the GPIO chips.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/gpiolib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index a82adc3c98a..9a2d114005b 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -165,4 +165,4 @@ static __init int s3c24xx_gpiolib_init(void)
 	return 0;
 }
 
-arch_initcall(s3c24xx_gpiolib_init);
+core_initcall(s3c24xx_gpiolib_init);
-- 
cgit v1.2.3


From 5233c178d4cedad0acd0eb0f24b2e09f7fafaa1c Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 18 May 2009 20:10:43 +0100
Subject: [ARM] S3C24XX: GPIO: Fix missing GPIOs in gpiolib

The GPG bank has 16 IOs, not 10. Add the missing GPH bank.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/gpiolib.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 9a2d114005b..6d7a961d326 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -148,9 +148,18 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 			.base			= S3C2410_GPG(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOG",
-			.ngpio			= 10,
+			.ngpio			= 16,
 			.to_irq			= s3c24xx_gpiolib_bankg_toirq,
 		},
+	}, {
+		.base	= S3C2410_GPHCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
+		.chip	= {
+			.base			= S3C2410_GPH(0),
+			.owner			= THIS_MODULE,
+			.label			= "GPIOH",
+			.ngpio			= 11,
+		},
 	},
 };
 
-- 
cgit v1.2.3


From 7a05a2cbd317cbd16e6d1689bb1e5e208eaaba6f Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 18 May 2009 20:15:01 +0100
Subject: [ARM] S3C24XX: GPIO: Change usb-simtec.c to use gpiolib.

Make arch/arm/mach-s3c2410/usb-simtec.c use gpiolib to
manage gpio access.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/mach-bast.c  |  3 +--
 arch/arm/mach-s3c2410/usb-simtec.c | 31 ++++++++++++++++++++++++-------
 2 files changed, 25 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 496463768de..31af898534c 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -594,8 +594,6 @@ static void __init bast_map_io(void)
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
-
-	usb_simtec_init();
 }
 
 static void __init bast_init(void)
@@ -609,6 +607,7 @@ static void __init bast_init(void)
 	i2c_register_board_info(0, bast_i2c_devs,
 				ARRAY_SIZE(bast_i2c_devs));
 
+	usb_simtec_init();
 	nor_simtec_init();
 }
 
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index dd45eb4a6f0..6cd9377ddb8 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -22,6 +22,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/gpio.h>
 #include <linux/io.h>
 
 #include <asm/mach/arch.h>
@@ -30,7 +31,6 @@
 
 #include <mach/bast-map.h>
 #include <mach/bast-irq.h>
-#include <mach/regs-gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -54,9 +54,9 @@ usb_simtec_powercontrol(int port, int to)
 	power_state[port] = to;
 
 	if (power_state[0] && power_state[1])
-		s3c2410_gpio_setpin(S3C2410_GPB(4), 0);
+		gpio_set_value(S3C2410_GPB(4), 0);
 	else
-		s3c2410_gpio_setpin(S3C2410_GPB(4), 1);
+		gpio_set_value(S3C2410_GPB(4), 1);
 }
 
 static irqreturn_t
@@ -64,7 +64,7 @@ usb_simtec_ocirq(int irq, void *pw)
 {
 	struct s3c2410_hcd_info *info = pw;
 
-	if (s3c2410_gpio_getpin(S3C2410_GPG(10)) == 0) {
+	if (gpio_get_value(S3C2410_GPG(10)) == 0) {
 		pr_debug("usb_simtec: over-current irq (oc detected)\n");
 		s3c2410_usb_report_oc(info, 3);
 	} else {
@@ -107,10 +107,27 @@ static struct s3c2410_hcd_info usb_simtec_info = {
 
 int usb_simtec_init(void)
 {
+	int ret;
+
 	printk("USB Power Control, (c) 2004 Simtec Electronics\n");
-	s3c_device_usb.dev.platform_data = &usb_simtec_info;
 
-	s3c2410_gpio_cfgpin(S3C2410_GPB(4), S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_setpin(S3C2410_GPB(4), 1);
+	ret = gpio_request(S3C2410_GPB(4), "USB power control");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPB4\n", __func__);
+		return ret;
+	}
+
+	ret = gpio_request(S3C2410_GPG(10), "USB overcurrent");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPG10\n", __func__);
+		gpio_free(S3C2410_GPB(4));
+		return ret;
+	}
+
+	/* turn power on */
+	gpio_direction_output(S3C2410_GPB(4), 1);
+	gpio_direction_input(S3C2410_GPG(10));
+
+	s3c_device_usb.dev.platform_data = &usb_simtec_info;
 	return 0;
 }
-- 
cgit v1.2.3