From 3f0e3ad72393db9c2932a2ca86cc1a49294bbc63 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Mon, 2 Nov 2009 14:24:36 +0000 Subject: tg3: Convert PHY_ADDR => TG3_PHY_MII_ADDR This patch renames the PHY_ADDR preprocessor definition. The following patch will identify a new member on the MDIO bus, so we want this preprocessor definition to be a little more descriptive. Signed-off-by: Matt Carlson Reviewed-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 51 +++++++++++++++++++++++++++++---------------------- drivers/net/tg3.h | 2 +- 2 files changed, 30 insertions(+), 23 deletions(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index b3c5d74022f..1c53250e400 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -937,7 +937,7 @@ static void tg3_mdio_config_5785(struct tg3 *tp) u32 val; struct phy_device *phydev; - phydev = tp->mdio_bus->phy_map[PHY_ADDR]; + phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]; switch (phydev->drv->phy_id & phydev->drv->phy_id_mask) { case TG3_PHY_ID_BCM50610: val = MAC_PHYCFG2_50610_LED_MODES; @@ -1031,7 +1031,7 @@ static void tg3_mdio_start(struct tg3 *tp) if (is_serdes) tp->phy_addr += 7; } else - tp->phy_addr = PHY_ADDR; + tp->phy_addr = TG3_PHY_MII_ADDR; if ((tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) && GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785) @@ -1062,7 +1062,7 @@ static int tg3_mdio_init(struct tg3 *tp) tp->mdio_bus->read = &tg3_mdio_read; tp->mdio_bus->write = &tg3_mdio_write; tp->mdio_bus->reset = &tg3_mdio_reset; - tp->mdio_bus->phy_mask = ~(1 << PHY_ADDR); + tp->mdio_bus->phy_mask = ~(1 << TG3_PHY_MII_ADDR); tp->mdio_bus->irq = &tp->mdio_irq[0]; for (i = 0; i < PHY_MAX_ADDR; i++) @@ -1084,7 +1084,7 @@ static int tg3_mdio_init(struct tg3 *tp) return i; } - phydev = tp->mdio_bus->phy_map[PHY_ADDR]; + phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]; if (!phydev || !phydev->drv) { printk(KERN_WARNING "%s: No PHY devices\n", tp->dev->name); @@ -1311,7 +1311,7 @@ static void tg3_setup_flow_control(struct tg3 *tp, u32 lcladv, u32 rmtadv) u32 old_tx_mode = tp->tx_mode; if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) - autoneg = tp->mdio_bus->phy_map[PHY_ADDR]->autoneg; + autoneg = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]->autoneg; else autoneg = tp->link_config.autoneg; @@ -1348,7 +1348,7 @@ static void tg3_adjust_link(struct net_device *dev) u8 oldflowctrl, linkmesg = 0; u32 mac_mode, lcl_adv, rmt_adv; struct tg3 *tp = netdev_priv(dev); - struct phy_device *phydev = tp->mdio_bus->phy_map[PHY_ADDR]; + struct phy_device *phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]; spin_lock_bh(&tp->lock); @@ -1434,7 +1434,7 @@ static int tg3_phy_init(struct tg3 *tp) /* Bring the PHY back to a known state. */ tg3_bmcr_reset(tp); - phydev = tp->mdio_bus->phy_map[PHY_ADDR]; + phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]; /* Attach the MAC to the PHY. */ phydev = phy_connect(tp->dev, dev_name(&phydev->dev), tg3_adjust_link, @@ -1461,7 +1461,7 @@ static int tg3_phy_init(struct tg3 *tp) SUPPORTED_Asym_Pause); break; default: - phy_disconnect(tp->mdio_bus->phy_map[PHY_ADDR]); + phy_disconnect(tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]); return -EINVAL; } @@ -1479,7 +1479,7 @@ static void tg3_phy_start(struct tg3 *tp) if (!(tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED)) return; - phydev = tp->mdio_bus->phy_map[PHY_ADDR]; + phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]; if (tp->link_config.phy_is_low_power) { tp->link_config.phy_is_low_power = 0; @@ -1499,13 +1499,13 @@ static void tg3_phy_stop(struct tg3 *tp) if (!(tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED)) return; - phy_stop(tp->mdio_bus->phy_map[PHY_ADDR]); + phy_stop(tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]); } static void tg3_phy_fini(struct tg3 *tp) { if (tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED) { - phy_disconnect(tp->mdio_bus->phy_map[PHY_ADDR]); + phy_disconnect(tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]); tp->tg3_flags3 &= ~TG3_FLG3_PHY_CONNECTED; } } @@ -2474,7 +2474,7 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state) struct phy_device *phydev; u32 phyid, advertising; - phydev = tp->mdio_bus->phy_map[PHY_ADDR]; + phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]; tp->link_config.phy_is_low_power = 1; @@ -9243,9 +9243,11 @@ static int tg3_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) struct tg3 *tp = netdev_priv(dev); if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) { + struct phy_device *phydev; if (!(tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED)) return -EAGAIN; - return phy_ethtool_gset(tp->mdio_bus->phy_map[PHY_ADDR], cmd); + phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]; + return phy_ethtool_gset(phydev, cmd); } cmd->supported = (SUPPORTED_Autoneg); @@ -9284,9 +9286,11 @@ static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) struct tg3 *tp = netdev_priv(dev); if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) { + struct phy_device *phydev; if (!(tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED)) return -EAGAIN; - return phy_ethtool_sset(tp->mdio_bus->phy_map[PHY_ADDR], cmd); + phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]; + return phy_ethtool_sset(phydev, cmd); } if (cmd->autoneg != AUTONEG_ENABLE && @@ -9469,7 +9473,7 @@ static int tg3_nway_reset(struct net_device *dev) if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) { if (!(tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED)) return -EAGAIN; - r = phy_start_aneg(tp->mdio_bus->phy_map[PHY_ADDR]); + r = phy_start_aneg(tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]); } else { u32 bmcr; @@ -9588,7 +9592,7 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam u32 newadv; struct phy_device *phydev; - phydev = tp->mdio_bus->phy_map[PHY_ADDR]; + phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]; if (epause->rx_pause) { if (epause->tx_pause) @@ -10568,9 +10572,11 @@ static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) int err; if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) { + struct phy_device *phydev; if (!(tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED)) return -EAGAIN; - return phy_mii_ioctl(tp->mdio_bus->phy_map[PHY_ADDR], data, cmd); + phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]; + return phy_mii_ioctl(phydev, data, cmd); } switch(cmd) { @@ -14135,13 +14141,14 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, tg3_bus_string(tp, str), dev->dev_addr); - if (tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED) + if (tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED) { + struct phy_device *phydev; + phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]; printk(KERN_INFO "%s: attached PHY driver [%s] (mii_bus:phy_addr=%s)\n", - tp->dev->name, - tp->mdio_bus->phy_map[PHY_ADDR]->drv->name, - dev_name(&tp->mdio_bus->phy_map[PHY_ADDR]->dev)); - else + tp->dev->name, phydev->drv->name, + dev_name(&phydev->dev)); + } else printk(KERN_INFO "%s: attached PHY is %s (%s Ethernet) (WireSpeed[%d])\n", tp->dev->name, tg3_phy_string(tp), diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index eb4ed82d71e..40501cb3b35 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -1954,7 +1954,7 @@ #define NIC_SRAM_MBUF_POOL_SIZE5705 0x0000e000 /* Currently this is fixed. */ -#define PHY_ADDR 0x01 +#define TG3_PHY_MII_ADDR 0x01 /* Tigon3 specific PHY MII registers. */ #define TG3_BMCR_SPEED1000 0x0040 -- cgit v1.2.3