From 266dead21675aeb89407b1213788cd924353d5e1 Mon Sep 17 00:00:00 2001 From: "Leo (Hao) Chen" Date: Fri, 9 Oct 2009 19:13:08 -0700 Subject: mtd: add bcmring nand driver Signed-off-by: Leo Hao Chen Signed-off-by: David Woodhouse --- arch/arm/mach-bcmring/arch.c | 10 + arch/arm/mach-bcmring/include/mach/reg_nand.h | 66 +++ arch/arm/mach-bcmring/include/mach/reg_umi.h | 237 +++++++++++ drivers/mtd/nand/Kconfig | 16 + drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/bcm_umi_bch.c | 213 ++++++++++ drivers/mtd/nand/bcm_umi_nand.c | 581 ++++++++++++++++++++++++++ drivers/mtd/nand/nand_bcm_umi.c | 149 +++++++ drivers/mtd/nand/nand_bcm_umi.h | 358 ++++++++++++++++ 9 files changed, 1631 insertions(+) create mode 100644 arch/arm/mach-bcmring/include/mach/reg_nand.h create mode 100644 arch/arm/mach-bcmring/include/mach/reg_umi.h create mode 100644 drivers/mtd/nand/bcm_umi_bch.c create mode 100644 drivers/mtd/nand/bcm_umi_nand.c create mode 100644 drivers/mtd/nand/nand_bcm_umi.c create mode 100644 drivers/mtd/nand/nand_bcm_umi.h diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c index 0da693b0f7e..074dad6b1c1 100644 --- a/arch/arm/mach-bcmring/arch.c +++ b/arch/arm/mach-bcmring/arch.c @@ -76,9 +76,19 @@ static struct ctl_table bcmring_sysctl_reboot[] = { {} }; +static struct resource nand_resource[] = { + [0] = { + .start = MM_ADDR_IO_NAND, + .end = MM_ADDR_IO_NAND + 0x1000 - 1, + .flags = IORESOURCE_MEM, + }, +}; + static struct platform_device nand_device = { .name = "bcm-nand", .id = -1, + .resource = nand_resource, + .num_resources = ARRAY_SIZE(nand_resource), }; static struct platform_device *devices[] __initdata = { diff --git a/arch/arm/mach-bcmring/include/mach/reg_nand.h b/arch/arm/mach-bcmring/include/mach/reg_nand.h new file mode 100644 index 00000000000..387376ffb56 --- /dev/null +++ b/arch/arm/mach-bcmring/include/mach/reg_nand.h @@ -0,0 +1,66 @@ +/***************************************************************************** +* Copyright 2001 - 2008 Broadcom Corporation. All rights reserved. +* +* Unless you and Broadcom execute a separate written software license +* agreement governing use of this software, this software is licensed to you +* under the terms of the GNU General Public License version 2, available at +* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +* +* Notwithstanding the above, under no circumstances may you combine this +* software in any way with any other Broadcom software provided under a +* license other than the GPL, without Broadcom's express prior written +* consent. +*****************************************************************************/ + +/* +* +***************************************************************************** +* +* REG_NAND.h +* +* PURPOSE: +* +* This file contains definitions for the nand registers: +* +* NOTES: +* +*****************************************************************************/ + +#if !defined(__ASM_ARCH_REG_NAND_H) +#define __ASM_ARCH_REG_NAND_H + +/* ---- Include Files ---------------------------------------------------- */ +#include +#include + +/* ---- Constants and Types ---------------------------------------------- */ + +#define HW_NAND_BASE MM_IO_BASE_NAND /* NAND Flash */ + +/* DMA accesses by the bootstrap need hard nonvirtual addresses */ +#define REG_NAND_CMD __REG16(HW_NAND_BASE + 0) +#define REG_NAND_ADDR __REG16(HW_NAND_BASE + 4) + +#define REG_NAND_PHYS_DATA16 (HW_NAND_BASE + 8) +#define REG_NAND_PHYS_DATA8 (HW_NAND_BASE + 8) +#define REG_NAND_DATA16 __REG16(REG_NAND_PHYS_DATA16) +#define REG_NAND_DATA8 __REG8(REG_NAND_PHYS_DATA8) + +/* use appropriate offset to make sure it start at the 1K boundary */ +#define REG_NAND_PHYS_DATA_DMA (HW_NAND_BASE + 0x400) +#define REG_NAND_DATA_DMA __REG32(REG_NAND_PHYS_DATA_DMA) + +/* Linux DMA requires physical address of the data register */ +#define REG_NAND_DATA16_PADDR HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA16) +#define REG_NAND_DATA8_PADDR HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA8) +#define REG_NAND_DATA_PADDR HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA_DMA) + +#define NAND_BUS_16BIT() (0) +#define NAND_BUS_8BIT() (!NAND_BUS_16BIT()) + +/* Register offsets */ +#define REG_NAND_CMD_OFFSET (0) +#define REG_NAND_ADDR_OFFSET (4) +#define REG_NAND_DATA8_OFFSET (8) + +#endif diff --git a/arch/arm/mach-bcmring/include/mach/reg_umi.h b/arch/arm/mach-bcmring/include/mach/reg_umi.h new file mode 100644 index 00000000000..06a355481ea --- /dev/null +++ b/arch/arm/mach-bcmring/include/mach/reg_umi.h @@ -0,0 +1,237 @@ +/***************************************************************************** +* Copyright 2005 - 2008 Broadcom Corporation. All rights reserved. +* +* Unless you and Broadcom execute a separate written software license +* agreement governing use of this software, this software is licensed to you +* under the terms of the GNU General Public License version 2, available at +* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +* +* Notwithstanding the above, under no circumstances may you combine this +* software in any way with any other Broadcom software provided under a +* license other than the GPL, without Broadcom's express prior written +* consent. +*****************************************************************************/ + +/* +* +***************************************************************************** +* +* REG_UMI.h +* +* PURPOSE: +* +* This file contains definitions for the nand registers: +* +* NOTES: +* +*****************************************************************************/ + +#if !defined(__ASM_ARCH_REG_UMI_H) +#define __ASM_ARCH_REG_UMI_H + +/* ---- Include Files ---------------------------------------------------- */ +#include +#include + +/* ---- Constants and Types ---------------------------------------------- */ + +/* Unified Memory Interface Ctrl Register */ +#define HW_UMI_BASE MM_IO_BASE_UMI + +/* Flash bank 0 timing and control register */ +#define REG_UMI_FLASH0_TCR __REG32(HW_UMI_BASE + 0x00) +/* Flash bank 1 timing and control register */ +#define REG_UMI_FLASH1_TCR __REG32(HW_UMI_BASE + 0x04) +/* Flash bank 2 timing and control register */ +#define REG_UMI_FLASH2_TCR __REG32(HW_UMI_BASE + 0x08) +/* MMD interface and control register */ +#define REG_UMI_MMD_ICR __REG32(HW_UMI_BASE + 0x0c) +/* NAND timing and control register */ +#define REG_UMI_NAND_TCR __REG32(HW_UMI_BASE + 0x18) +/* NAND ready/chip select register */ +#define REG_UMI_NAND_RCSR __REG32(HW_UMI_BASE + 0x1c) +/* NAND ECC control & status register */ +#define REG_UMI_NAND_ECC_CSR __REG32(HW_UMI_BASE + 0x20) +/* NAND ECC data register XXB2B1B0 */ +#define REG_UMI_NAND_ECC_DATA __REG32(HW_UMI_BASE + 0x24) +/* BCH ECC Parameter N */ +#define REG_UMI_BCH_N __REG32(HW_UMI_BASE + 0x40) +/* BCH ECC Parameter T */ +#define REG_UMI_BCH_K __REG32(HW_UMI_BASE + 0x44) +/* BCH ECC Parameter K */ +#define REG_UMI_BCH_T __REG32(HW_UMI_BASE + 0x48) +/* BCH ECC Contro Status */ +#define REG_UMI_BCH_CTRL_STATUS __REG32(HW_UMI_BASE + 0x4C) +/* BCH WR ECC 31:0 */ +#define REG_UMI_BCH_WR_ECC_0 __REG32(HW_UMI_BASE + 0x50) +/* BCH WR ECC 63:32 */ +#define REG_UMI_BCH_WR_ECC_1 __REG32(HW_UMI_BASE + 0x54) +/* BCH WR ECC 95:64 */ +#define REG_UMI_BCH_WR_ECC_2 __REG32(HW_UMI_BASE + 0x58) +/* BCH WR ECC 127:96 */ +#define REG_UMI_BCH_WR_ECC_3 __REG32(HW_UMI_BASE + 0x5c) +/* BCH WR ECC 155:128 */ +#define REG_UMI_BCH_WR_ECC_4 __REG32(HW_UMI_BASE + 0x60) +/* BCH Read Error Location 1,0 */ +#define REG_UMI_BCH_RD_ERR_LOC_1_0 __REG32(HW_UMI_BASE + 0x64) +/* BCH Read Error Location 3,2 */ +#define REG_UMI_BCH_RD_ERR_LOC_3_2 __REG32(HW_UMI_BASE + 0x68) +/* BCH Read Error Location 5,4 */ +#define REG_UMI_BCH_RD_ERR_LOC_5_4 __REG32(HW_UMI_BASE + 0x6c) +/* BCH Read Error Location 7,6 */ +#define REG_UMI_BCH_RD_ERR_LOC_7_6 __REG32(HW_UMI_BASE + 0x70) +/* BCH Read Error Location 9,8 */ +#define REG_UMI_BCH_RD_ERR_LOC_9_8 __REG32(HW_UMI_BASE + 0x74) +/* BCH Read Error Location 11,10 */ +#define REG_UMI_BCH_RD_ERR_LOC_B_A __REG32(HW_UMI_BASE + 0x78) + +/* REG_UMI_FLASH0/1/2_TCR, REG_UMI_SRAM0/1_TCR bits */ +/* Enable wait pin during burst write or read */ +#define REG_UMI_TCR_WAITEN 0x80000000 +/* Enable mem ctrlr to work iwth ext mem of lower freq than AHB clk */ +#define REG_UMI_TCR_LOWFREQ 0x40000000 +/* 1=synch write, 0=async write */ +#define REG_UMI_TCR_MEMTYPE_SYNCWRITE 0x20000000 +/* 1=synch read, 0=async read */ +#define REG_UMI_TCR_MEMTYPE_SYNCREAD 0x10000000 +/* 1=page mode read, 0=normal mode read */ +#define REG_UMI_TCR_MEMTYPE_PAGEREAD 0x08000000 +/* page size/burst size (wrap only) */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_MASK 0x07000000 +/* 4 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_4 0x00000000 +/* 8 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_8 0x01000000 +/* 16 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_16 0x02000000 +/* 32 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_32 0x03000000 +/* 64 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_64 0x04000000 +/* 128 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_128 0x05000000 +/* 256 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_256 0x06000000 +/* 512 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_512 0x07000000 +/* Page read access cycle / Burst write latency (n+2 / n+1) */ +#define REG_UMI_TCR_TPRC_TWLC_MASK 0x00f80000 +/* Bus turnaround cycle (n) */ +#define REG_UMI_TCR_TBTA_MASK 0x00070000 +/* Write pulse width cycle (n+1) */ +#define REG_UMI_TCR_TWP_MASK 0x0000f800 +/* Write recovery cycle (n+1) */ +#define REG_UMI_TCR_TWR_MASK 0x00000600 +/* Write address setup cycle (n+1) */ +#define REG_UMI_TCR_TAS_MASK 0x00000180 +/* Output enable delay cycle (n) */ +#define REG_UMI_TCR_TOE_MASK 0x00000060 +/* Read access cycle / Burst read latency (n+2 / n+1) */ +#define REG_UMI_TCR_TRC_TLC_MASK 0x0000001f + +/* REG_UMI_MMD_ICR bits */ +/* Flash write protection pin control */ +#define REG_UMI_MMD_ICR_FLASH_WP 0x8000 +/* Extend hold time for sram0, sram1 csn (39 MHz operation) */ +#define REG_UMI_MMD_ICR_XHCS 0x4000 +/* Enable SDRAM 2 interface control */ +#define REG_UMI_MMD_ICR_SDRAM2EN 0x2000 +/* Enable merge of flash banks 0/1 to 512 MBit bank */ +#define REG_UMI_MMD_ICR_INST512 0x1000 +/* Enable merge of flash banks 1/2 to 512 MBit bank */ +#define REG_UMI_MMD_ICR_DATA512 0x0800 +/* Enable SDRAM interface control */ +#define REG_UMI_MMD_ICR_SDRAMEN 0x0400 +/* Polarity of busy state of Burst Wait Signal */ +#define REG_UMI_MMD_ICR_WAITPOL 0x0200 +/* Enable burst clock stopped when not accessing external burst flash/sram */ +#define REG_UMI_MMD_ICR_BCLKSTOP 0x0100 +/* Enable the peri1_csn to replace flash1_csn in 512 Mb flash mode */ +#define REG_UMI_MMD_ICR_PERI1EN 0x0080 +/* Enable the peri2_csn to replace sdram_csn */ +#define REG_UMI_MMD_ICR_PERI2EN 0x0040 +/* Enable the peri3_csn to replace sdram2_csn */ +#define REG_UMI_MMD_ICR_PERI3EN 0x0020 +/* Enable sram bank1 for H/W controlled MRS */ +#define REG_UMI_MMD_ICR_MRSB1 0x0010 +/* Enable sram bank0 for H/W controlled MRS */ +#define REG_UMI_MMD_ICR_MRSB0 0x0008 +/* Polarity for assert3ed state of H/W controlled MRS */ +#define REG_UMI_MMD_ICR_MRSPOL 0x0004 +/* 0: S/W controllable ZZ/MRS/CRE/P-Mode pin */ +/* 1: H/W controlled ZZ/MRS/CRE/P-Mode, same timing as CS */ +#define REG_UMI_MMD_ICR_MRSMODE 0x0002 +/* MRS state for S/W controlled mode */ +#define REG_UMI_MMD_ICR_MRSSTATE 0x0001 + +/* REG_UMI_NAND_TCR bits */ +/* Enable software to control CS */ +#define REG_UMI_NAND_TCR_CS_SWCTRL 0x80000000 +/* 16-bit nand wordsize if set */ +#define REG_UMI_NAND_TCR_WORD16 0x40000000 +/* Bus turnaround cycle (n) */ +#define REG_UMI_NAND_TCR_TBTA_MASK 0x00070000 +/* Write pulse width cycle (n+1) */ +#define REG_UMI_NAND_TCR_TWP_MASK 0x0000f800 +/* Write recovery cycle (n+1) */ +#define REG_UMI_NAND_TCR_TWR_MASK 0x00000600 +/* Write address setup cycle (n+1) */ +#define REG_UMI_NAND_TCR_TAS_MASK 0x00000180 +/* Output enable delay cycle (n) */ +#define REG_UMI_NAND_TCR_TOE_MASK 0x00000060 +/* Read access cycle (n+2) */ +#define REG_UMI_NAND_TCR_TRC_TLC_MASK 0x0000001f + +/* REG_UMI_NAND_RCSR bits */ +/* Status: Ready=1, Busy=0 */ +#define REG_UMI_NAND_RCSR_RDY 0x02 +/* Keep CS asserted during operation */ +#define REG_UMI_NAND_RCSR_CS_ASSERTED 0x01 + +/* REG_UMI_NAND_ECC_CSR bits */ +/* Interrupt status - read-only */ +#define REG_UMI_NAND_ECC_CSR_NANDINT 0x80000000 +/* Read: Status of ECC done, Write: clear ECC interrupt */ +#define REG_UMI_NAND_ECC_CSR_ECCINT_RAW 0x00800000 +/* Read: Status of R/B, Write: clear R/B interrupt */ +#define REG_UMI_NAND_ECC_CSR_RBINT_RAW 0x00400000 +/* 1 = Enable ECC Interrupt */ +#define REG_UMI_NAND_ECC_CSR_ECCINT_ENABLE 0x00008000 +/* 1 = Assert interrupt at rising edge of R/B_ */ +#define REG_UMI_NAND_ECC_CSR_RBINT_ENABLE 0x00004000 +/* Calculate ECC by 0=512 bytes, 1=256 bytes */ +#define REG_UMI_NAND_ECC_CSR_256BYTE 0x00000080 +/* Enable ECC in hardware */ +#define REG_UMI_NAND_ECC_CSR_ECC_ENABLE 0x00000001 + +/* REG_UMI_BCH_CTRL_STATUS bits */ +/* Shift to Indicate Number of correctable errors detected */ +#define REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR_SHIFT 20 +/* Indicate Number of correctable errors detected */ +#define REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR 0x00F00000 +/* Indicate Errors detected during read but uncorrectable */ +#define REG_UMI_BCH_CTRL_STATUS_UNCORR_ERR 0x00080000 +/* Indicate Errors detected during read and are correctable */ +#define REG_UMI_BCH_CTRL_STATUS_CORR_ERR 0x00040000 +/* Flag indicates BCH's ECC status of read process are valid */ +#define REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID 0x00020000 +/* Flag indicates BCH's ECC status of write process are valid */ +#define REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID 0x00010000 +/* Pause ECC calculation */ +#define REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC 0x00000010 +/* Enable Interrupt */ +#define REG_UMI_BCH_CTRL_STATUS_INT_EN 0x00000004 +/* Enable ECC during read */ +#define REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN 0x00000002 +/* Enable ECC during write */ +#define REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN 0x00000001 +/* Mask for location */ +#define REG_UMI_BCH_ERR_LOC_MASK 0x00001FFF +/* location within a byte */ +#define REG_UMI_BCH_ERR_LOC_BYTE 0x00000007 +/* location within a word */ +#define REG_UMI_BCH_ERR_LOC_WORD 0x00000018 +/* location within a page (512 byte) */ +#define REG_UMI_BCH_ERR_LOC_PAGE 0x00001FE0 +#define REG_UMI_BCH_ERR_LOC_ADDR(index) (__REG32(HW_UMI_BASE + 0x64 + (index / 2)*4) >> ((index % 2) * 16)) +#endif diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 2fda0b61524..34598e9c1a4 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -203,6 +203,22 @@ config MTD_NAND_S3C2410_CLKSTOP when the is NAND chip selected or released, but will save approximately 5mA of power when there is nothing happening. +config MTD_NAND_BCM_UMI + tristate "NAND Flash support for BCM Reference Boards" + depends on ARCH_BCMRING && MTD_NAND + help + This enables the NAND flash controller on the BCM UMI block. + + No board specfic support is done by this driver, each board + must advertise a platform_device for the driver to attach. + +config MTD_NAND_BCM_UMI_HWCS + bool "BCM UMI NAND Hardware CS" + depends on MTD_NAND_BCM_UMI + help + Enable the use of the BCM UMI block's internal CS using NAND. + This should only be used if you know the external NAND CS can toggle. + config MTD_NAND_DISKONCHIP tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation) (EXPERIMENTAL)" depends on EXPERIMENTAL diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 6950d3dabf1..460a1f39a8d 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -42,5 +42,6 @@ obj-$(CONFIG_MTD_NAND_SOCRATES) += socrates_nand.o obj-$(CONFIG_MTD_NAND_TXX9NDFMC) += txx9ndfmc.o obj-$(CONFIG_MTD_NAND_W90P910) += w90p910_nand.o obj-$(CONFIG_MTD_NAND_NOMADIK) += nomadik_nand.o +obj-$(CONFIG_MTD_NAND_BCM_UMI) += bcm_umi_nand.o nand_bcm_umi.o nand-objs := nand_base.o nand_bbt.o diff --git a/drivers/mtd/nand/bcm_umi_bch.c b/drivers/mtd/nand/bcm_umi_bch.c new file mode 100644 index 00000000000..a930666d068 --- /dev/null +++ b/drivers/mtd/nand/bcm_umi_bch.c @@ -0,0 +1,213 @@ +/***************************************************************************** +* Copyright 2004 - 2009 Broadcom Corporation. All rights reserved. +* +* Unless you and Broadcom execute a separate written software license +* agreement governing use of this software, this software is licensed to you +* under the terms of the GNU General Public License version 2, available at +* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +* +* Notwithstanding the above, under no circumstances may you combine this +* software in any way with any other Broadcom software provided under a +* license other than the GPL, without Broadcom's express prior written +* consent. +*****************************************************************************/ + +/* ---- Include Files ---------------------------------------------------- */ +#include "nand_bcm_umi.h" + +/* ---- External Variable Declarations ----------------------------------- */ +/* ---- External Function Prototypes ------------------------------------- */ +/* ---- Public Variables ------------------------------------------------- */ +/* ---- Private Constants and Types -------------------------------------- */ + +/* ---- Private Function Prototypes -------------------------------------- */ +static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd, + struct nand_chip *chip, uint8_t *buf, int page); +static void bcm_umi_bch_write_page_hwecc(struct mtd_info *mtd, + struct nand_chip *chip, const uint8_t *buf); + +/* ---- Private Variables ------------------------------------------------ */ + +/* +** nand_hw_eccoob +** New oob placement block for use with hardware ecc generation. +*/ +static struct nand_ecclayout nand_hw_eccoob_512 = { + /* Reserve 5 for BI indicator */ + .oobfree = { +#if (NAND_ECC_NUM_BYTES > 3) + {.offset = 0, .length = 2} +#else + {.offset = 0, .length = 5}, + {.offset = 6, .length = 7} +#endif + } +}; + +/* +** We treat the OOB for a 2K page as if it were 4 512 byte oobs, +** except the BI is at byte 0. +*/ +static struct nand_ecclayout nand_hw_eccoob_2048 = { + /* Reserve 0 as BI indicator */ + .oobfree = { +#if (NAND_ECC_NUM_BYTES > 10) + {.offset = 1, .length = 2}, +#elif (NAND_ECC_NUM_BYTES > 7) + {.offset = 1, .length = 5}, + {.offset = 16, .length = 6}, + {.offset = 32, .length = 6}, + {.offset = 48, .length = 6} +#else + {.offset = 1, .length = 8}, + {.offset = 16, .length = 9}, + {.offset = 32, .length = 9}, + {.offset = 48, .length = 9} +#endif + } +}; + +/* We treat the OOB for a 4K page as if it were 8 512 byte oobs, + * except the BI is at byte 0. */ +static struct nand_ecclayout nand_hw_eccoob_4096 = { + /* Reserve 0 as BI indicator */ + .oobfree = { +#if (NAND_ECC_NUM_BYTES > 10) + {.offset = 1, .length = 2}, + {.offset = 16, .length = 3}, + {.offset = 32, .length = 3}, + {.offset = 48, .length = 3}, + {.offset = 64, .length = 3}, + {.offset = 80, .length = 3}, + {.offset = 96, .length = 3}, + {.offset = 112, .length = 3} +#else + {.offset = 1, .length = 5}, + {.offset = 16, .length = 6}, + {.offset = 32, .length = 6}, + {.offset = 48, .length = 6}, + {.offset = 64, .length = 6}, + {.offset = 80, .length = 6}, + {.offset = 96, .length = 6}, + {.offset = 112, .length = 6} +#endif + } +}; + +/* ---- Private Functions ------------------------------------------------ */ +/* ==== Public Functions ================================================= */ + +/**************************************************************************** +* +* bcm_umi_bch_read_page_hwecc - hardware ecc based page read function +* @mtd: mtd info structure +* @chip: nand chip info structure +* @buf: buffer to store read data +* +***************************************************************************/ +static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd, + struct nand_chip *chip, uint8_t * buf, + int page) +{ + int sectorIdx = 0; + int eccsize = chip->ecc.size; + int eccsteps = chip->ecc.steps; + uint8_t *datap = buf; + uint8_t eccCalc[NAND_ECC_NUM_BYTES]; + int sectorOobSize = mtd->oobsize / eccsteps; + int stat; + + for (sectorIdx = 0; sectorIdx < eccsteps; + sectorIdx++, datap += eccsize) { + if (sectorIdx > 0) { + /* Seek to page location within sector */ + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, sectorIdx * eccsize, + -1); + } + + /* Enable hardware ECC before reading the buf */ + nand_bcm_umi_bch_enable_read_hwecc(); + + /* Read in data */ + bcm_umi_nand_read_buf(mtd, datap, eccsize); + + /* Pause hardware ECC after reading the buf */ + nand_bcm_umi_bch_pause_read_ecc_calc(); + + /* Read the OOB ECC */ + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, + mtd->writesize + sectorIdx * sectorOobSize, -1); + nand_bcm_umi_bch_read_oobEcc(mtd->writesize, eccCalc, + NAND_ECC_NUM_BYTES, + chip->oob_poi + + sectorIdx * sectorOobSize); + + /* Correct any ECC detected errors */ + stat = + nand_bcm_umi_bch_correct_page(datap, eccCalc, + NAND_ECC_NUM_BYTES); + + /* Update Stats */ + if (stat < 0) { +#if defined(NAND_BCM_UMI_DEBUG) + printk(KERN_WARNING "%s uncorr_err sectorIdx=%d\n", + __func__, sectorIdx); + printk(KERN_WARNING + "%s data %02x %02x %02x %02x " + "%02x %02x %02x %02x\n", + __func__, datap[0], datap[1], datap[2], datap[3], + datap[4], datap[5], datap[6], datap[7]); + printk(KERN_WARNING + "%s ecc %02x %02x %02x %02x " + "%02x %02x %02x %02x %02x %02x " + "%02x %02x %02x\n", + __func__, eccCalc[0], eccCalc[1], eccCalc[2], + eccCalc[3], eccCalc[4], eccCalc[5], eccCalc[6], + eccCalc[7], eccCalc[8], eccCalc[9], eccCalc[10], + eccCalc[11], eccCalc[12]); + BUG(); +#endif + mtd->ecc_stats.failed++; + } else { +#if defined(NAND_BCM_UMI_DEBUG) + if (stat > 0) { + printk(KERN_INFO + "%s %d correctable_errors detected\n", + __func__, stat); + } +#endif + mtd->ecc_stats.corrected += stat; + } + } + return 0; +} + +/**************************************************************************** +* +* bcm_umi_bch_write_page_hwecc - hardware ecc based page write function +* @mtd: mtd info structure +* @chip: nand chip info structure +* @buf: data buffer +* +***************************************************************************/ +static void bcm_umi_bch_write_page_hwecc(struct mtd_info *mtd, + struct nand_chip *chip, const uint8_t *buf) +{ + int sectorIdx = 0; + int eccsize = chip->ecc.size; + int eccsteps = chip->ecc.steps; + const uint8_t *datap = buf; + uint8_t *oobp = chip->oob_poi; + int sectorOobSize = mtd->oobsize / eccsteps; + + for (sectorIdx = 0; sectorIdx < eccsteps; + sectorIdx++, datap += eccsize, oobp += sectorOobSize) { + /* Enable hardware ECC before writing the buf */ + nand_bcm_umi_bch_enable_write_hwecc(); + bcm_umi_nand_write_buf(mtd, datap, eccsize); + nand_bcm_umi_bch_write_oobEcc(mtd->writesize, oobp, + NAND_ECC_NUM_BYTES); + } + + bcm_umi_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize); +} diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c new file mode 100644 index 00000000000..087bcd745bb --- /dev/null +++ b/drivers/mtd/nand/bcm_umi_nand.c @@ -0,0 +1,581 @@ +/***************************************************************************** +* Copyright 2004 - 2009 Broadcom Corporation. All rights reserved. +* +* Unless you and Broadcom execute a separate written software license +* agreement governing use of this software, this software is licensed to you +* under the terms of the GNU General Public License version 2, available at +* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +* +* Notwithstanding the above, under no circumstances may you combine this +* software in any way with any other Broadcom software provided under a +* license other than the GPL, without Broadcom's express prior written +* consent. +*****************************************************************************/ + +/* ---- Include Files ---------------------------------------------------- */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include "nand_bcm_umi.h" + +#include + +#define USE_DMA 1 +#include +#include +#include + +/* ---- External Variable Declarations ----------------------------------- */ +/* ---- External Function Prototypes ------------------------------------- */ +/* ---- Public Variables ------------------------------------------------- */ +/* ---- Private Constants and Types -------------------------------------- */ +static const __devinitconst char gBanner[] = KERN_INFO \ + "BCM UMI MTD NAND Driver: 1.00\n"; + +#ifdef CONFIG_MTD_PARTITIONS +const char *part_probes[] = { "cmdlinepart", NULL }; +#endif + +#if NAND_ECC_BCH +static uint8_t scan_ff_pattern[] = { 0xff }; + +static struct nand_bbt_descr largepage_bbt = { + .options = 0, + .offs = 0, + .len = 1, + .pattern = scan_ff_pattern +}; +#endif + +/* +** Preallocate a buffer to avoid having to do this every dma operation. +** This is the size of the preallocated coherent DMA buffer. +*/ +#if USE_DMA +#define DMA_MIN_BUFLEN 512 +#define DMA_MAX_BUFLEN PAGE_SIZE +#define USE_DIRECT_IO(len) (((len) < DMA_MIN_BUFLEN) || \ + ((len) > DMA_MAX_BUFLEN)) + +/* + * The current NAND data space goes from 0x80001900 to 0x80001FFF, + * which is only 0x700 = 1792 bytes long. This is too small for 2K, 4K page + * size NAND flash. Need to break the DMA down to multiple 1Ks. + * + * Need to make sure REG_NAND_DATA_PADDR + DMA_MAX_LEN < 0x80002000 + */ +#define DMA_MAX_LEN 1024 + +#else /* !USE_DMA */ +#define DMA_MIN_BUFLEN 0 +#define DMA_MAX_BUFLEN 0 +#define USE_DIRECT_IO(len) 1 +#endif +/* ---- Private Function Prototypes -------------------------------------- */ +static void bcm_umi_nand_read_buf(struct mtd_info *mtd, u_char * buf, int len); +static void bcm_umi_nand_write_buf(struct mtd_info *mtd, const u_char * buf, + int len); + +/* ---- Private Variables ------------------------------------------------ */ +static struct mtd_info *board_mtd; +static void __iomem *bcm_umi_io_base; +static void *virtPtr; +static dma_addr_t physPtr; +static struct completion nand_comp; + +/* ---- Private Functions ------------------------------------------------ */ +#if NAND_ECC_BCH +#include "bcm_umi_bch.c" +#else +#include "bcm_umi_hamming.c" +#endif + +#if USE_DMA + +/* Handler called when the DMA finishes. */ +static void nand_dma_handler(DMA_Device_t dev, int reason, void *userData) +{ + complete(&nand_comp); +} + +static int nand_dma_init(void) +{ + int rc; + + rc = dma_set_device_handler(DMA_DEVICE_NAND_MEM_TO_MEM, + nand_dma_handler, NULL); + if (rc != 0) { + printk(KERN_ERR "dma_set_device_handler failed: %d\n", rc); + return rc; + } + + virtPtr = + dma_alloc_coherent(NULL, DMA_MAX_BUFLEN, &physPtr, GFP_KERNEL); + if (virtPtr == NULL) { + printk(KERN_ERR "NAND - Failed to allocate memory for DMA buffer\n"); + return -ENOMEM; + } + + return 0; +} + +static void nand_dma_term(void) +{ + if (virtPtr != NULL) + dma_free_coherent(NULL, DMA_MAX_BUFLEN, virtPtr, physPtr); +} + +static void nand_dma_read(void *buf, int len) +{ + int offset = 0; + int tmp_len = 0; + int len_left = len; + DMA_Handle_t hndl; + + if (virtPtr == NULL) + panic("nand_dma_read: virtPtr == NULL\n"); + + if ((void *)physPtr == NULL) + panic("nand_dma_read: physPtr == NULL\n"); + + hndl = dma_request_channel(DMA_DEVICE_NAND_MEM_TO_MEM); + if (hndl < 0) { + printk(KERN_ERR + "nand_dma_read: unable to allocate dma channel: %d\n", + (int)hndl); + panic("\n"); + } + + while (len_left > 0) { + if (len_left > DMA_MAX_LEN) { + tmp_len = DMA_MAX_LEN; + len_left -= DMA_MAX_LEN; + } else { + tmp_len = len_left; + len_left = 0; + } + + init_completion(&nand_comp); + dma_transfer_mem_to_mem(hndl, REG_NAND_DATA_PADDR, + physPtr + offset, tmp_len); + wait_for_completion(&nand_comp); + + offset += tmp_len; + } + + dma_free_channel(hndl); + + if (buf != NULL) + memcpy(buf, virtPtr, len); +} + +static void nand_dma_write(const void *buf, int len) +{ + int offset = 0; + int tmp_len = 0; + int len_left = len; + DMA_Handle_t hndl; + + if (buf == NULL) + panic("nand_dma_write: buf == NULL\n"); + + if (virtPtr == NULL) + panic("nand_dma_write: virtPtr == NULL\n"); + + if ((void *)physPtr == NULL) + panic("nand_dma_write: physPtr == NULL\n"); + + memcpy(virtPtr, buf, len); + + + hndl = dma_request_channel(DMA_DEVICE_NAND_MEM_TO_MEM); + if (hndl < 0) { + printk(KERN_ERR + "nand_dma_write: unable to allocate dma channel: %d\n", + (int)hndl); + panic("\n"); + } + + while (len_left > 0) { + if (len_left > DMA_MAX_LEN) { + tmp_len = DMA_MAX_LEN; + len_left -= DMA_MAX_LEN; + } else { + tmp_len = len_left; + len_left = 0; + } + + init_completion(&nand_comp); + dma_transfer_mem_to_mem(hndl, physPtr + offset, + REG_NAND_DATA_PADDR, tmp_len); + wait_for_completion(&nand_comp); + + offset += tmp_len; + } + + dma_free_channel(hndl); +} + +#endif + +static int nand_dev_ready(struct mtd_info *mtd) +{ + return nand_bcm_umi_dev_ready(); +} + +/**************************************************************************** +* +* bcm_umi_nand_inithw +* +* This routine does the necessary hardware (board-specific) +* initializations. This includes setting up the timings, etc. +* +***************************************************************************/ +int bcm_umi_nand_inithw(void) +{ + /* Configure nand timing parameters */ + REG_UMI_NAND_TCR &= ~0x7ffff; + REG_UMI_NAND_TCR |= HW_CFG_NAND_TCR; + +#if !defined(CONFIG_MTD_NAND_BCM_UMI_HWCS) + /* enable software control of CS */ + REG_UMI_NAND_TCR |= REG_UMI_NAND_TCR_CS_SWCTRL; +#endif + + /* keep NAND chip select asserted */ + REG_UMI_NAND_RCSR |= REG_UMI_NAND_RCSR_CS_ASSERTED; + + REG_UMI_NAND_TCR &= ~REG_UMI_NAND_TCR_WORD16; + /* enable writes to flash */ + REG_UMI_MMD_ICR |= REG_UMI_MMD_ICR_FLASH_WP; + + writel(NAND_CMD_RESET, bcm_umi_io_base + REG_NAND_CMD_OFFSET); + nand_bcm_umi_wait_till_ready(); + +#if NAND_ECC_BCH + nand_bcm_umi_bch_config_ecc(NAND_ECC_NUM_BYTES); +#endif + + return 0; +} + +/* Used to turn latch the proper register for access. */ +static void bcm_umi_nand_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + /* send command to hardware */ + struct nand_chip *chip = mtd->priv; + if (ctrl & NAND_CTRL_CHANGE) { + if (ctrl & NAND_CLE) { + chip->IO_ADDR_W = bcm_umi_io_base + REG_NAND_CMD_OFFSET; + goto CMD; + } + if (ctrl & NAND_ALE) { + chip->IO_ADDR_W = + bcm_umi_io_base + REG_NAND_ADDR_OFFSET; + goto CMD; + } + chip->IO_ADDR_W = bcm_umi_io_base + REG_NAND_DATA8_OFFSET; + } + +CMD: + /* Send command to chip directly */ + if (cmd != NAND_CMD_NONE) + writeb(cmd, chip->IO_ADDR_W); +} + +static void bcm_umi_nand_write_buf(struct mtd_info *mtd, const u_char * buf, + int len) +{ + if (USE_DIRECT_IO(len)) { + /* Do it the old way if the buffer is small or too large. + * Probably quicker than starting and checking dma. */ + int i; + struct nand_chip *this = mtd->priv; + + for (i = 0; i < len; i++) + writeb(buf[i], this->IO_ADDR_W); + } +#if USE_DMA + else + nand_dma_write(buf, len); +#endif +} + +static void bcm_umi_nand_read_buf(struct mtd_info *mtd, u_char * buf, int len) +{ + if (USE_DIRECT_IO(len)) { + int i; + struct nand_chip *this = mtd->priv; + + for (i = 0; i < len; i++) + buf[i] = readb(this->IO_ADDR_R); + } +#if USE_DMA + else + nand_dma_read(buf, len); +#endif +} + +static uint8_t readbackbuf[NAND_MAX_PAGESIZE]; +static int bcm_umi_nand_verify_buf(struct mtd_info *mtd, const u_char * buf, + int len) +{ + /* + * Try to readback page with ECC correction. This is necessary + * for MLC parts which may have permanently stuck bits. + */ + struct nand_chip *chip = mtd->priv; + int ret = chip->ecc.read_page(mtd, chip, readbackbuf, 0); + if (ret < 0) + return -EFAULT; + else { + if (memcmp(readbackbuf, buf, len) == 0) + return 0; + + return -EFAULT; + } + return 0; +} + +static int __devinit bcm_umi_nand_probe(struct platform_device *pdev) +{ + struct nand_chip *this; + struct resource *r; + int err = 0; + + printk(gBanner); + + /* Allocate memory for MTD device structure and private data */ + board_mtd = + kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), + GFP_KERNEL); + if (!board_mtd) { + printk(KERN_WARNING + "Unable to allocate NAND MTD device structure.\n"); + return -ENOMEM; + } + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + if (!r) + return -ENXIO; + + /* map physical adress */ + bcm_umi_io_base = ioremap(r->start, r->end - r->start + 1); + + if (!bcm_umi_io_base) { + printk(KERN_ERR "ioremap to access BCM UMI NAND chip failed\n"); + kfree(board_mtd); + return -EIO; + } + + /* Get pointer to private data */ + this = (struct nand_chip *)(&board_mtd[1]); + + /* Initialize structures */ + memset((char *)board_mtd, 0, sizeof(struct mtd_info)); + memset((char *)this, 0, sizeof(struct nand_chip)); + + /* Link the private data with the MTD structure */ + board_mtd->priv = this; + + /* Initialize the NAND hardware. */ + if (bcm_umi_nand_inithw() < 0) { + printk(KERN_ERR "BCM UMI NAND chip could not be initialized\n"); + iounmap(bcm_umi_io_base); + kfree(board_mtd); + return -EIO; + } + + /* Set address of NAND IO lines */ + this->IO_ADDR_W = bcm_umi_io_base + REG_NAND_DATA8_OFFSET; + this->IO_ADDR_R = bcm_umi_io_base + REG_NAND_DATA8_OFFSET; + + /* Set command delay time, see datasheet for correct value */ + this->chip_delay = 0; + /* Assign the device ready function, if available */ + this->dev_ready = nand_dev_ready; + this->options = 0; + + this->write_buf = bcm_umi_nand_write_buf; + this->read_buf = bcm_umi_nand_read_buf; + this->verify_buf = bcm_umi_nand_verify_buf; + + this->cmd_ctrl = bcm_umi_nand_hwcontrol; + this->ecc.mode = NAND_ECC_HW; + this->ecc.size = 512; + this->ecc.bytes = NAND_ECC_NUM_BYTES; +#if NAND_ECC_BCH + this->ecc.read_page = bcm_umi_bch_read_page_hwecc; + this->ecc.write_page = bcm_umi_bch_write_page_hwecc; +#else + this->ecc.correct = nand_correct_data512; + this->ecc.calculate = bcm_umi_hamming_get_hw_ecc; + this->ecc.hwctl = bcm_umi_hamming_enable_hwecc; +#endif + +#if USE_DMA + err = nand_dma_init(); + if (err != 0) + return err; +#endif + + /* Figure out the size of the device that we have. + * We need to do this to figure out which ECC + * layout we'll be using. + */ + + err = nand_scan_ident(board_mtd, 1); + if (err) { + printk(KERN_ERR "nand_scan failed: %d\n", err); + iounmap(bcm_umi_io_base); + kfree(board_mtd); + return err; + } + + /* Now that we know the nand size, we can setup the ECC layout */ + + switch (board_mtd->writesize) { /* writesize is the pagesize */ + case 4096: + this->ecc.layout = &nand_hw_eccoob_4096; + break; + case 2048: + this->ecc.layout = &nand_hw_eccoob_2048; + break; + case 512: + this->ecc.layout = &nand_hw_eccoob_512; + break; + default: + { + printk(KERN_ERR "NAND - Unrecognized pagesize: %d\n", + board_mtd->writesize); + return -EINVAL; + } + } + +#if NAND_ECC_BCH + if (board_mtd->writesize > 512) { + if (this->options & NAND_USE_FLASH_BBT) + largepage_bbt.options = NAND_BBT_SCAN2NDPAGE; + this->badblock_pattern = &largepage_bbt; + } +#endif + + /* Now finish off the scan, now that ecc.layout has been initialized. */ + + err = nand_scan_tail(board_mtd); + if (err) { + printk(KERN_ERR "nand_scan failed: %d\n", err); + iounmap(bcm_umi_io_base); + kfree(board_mtd); + return err; + } + + /* Register the partitions */ + { + int nr_partitions; + struct mtd_partition *partition_info; + + board_mtd->name = "bcm_umi-nand"; + nr_partitions = + parse_mtd_partitions(board_mtd, part_probes, + &partition_info, 0); + + if (nr_partitions <= 0) { + printk(KERN_ERR "BCM UMI NAND: Too few partitions - %d\n", + nr_partitions); + iounmap(bcm_umi_io_base); + kfree(board_mtd); + return -EIO; + } + add_mtd_partitions(board_mtd, partition_info, nr_partitions); + } + + /* Return happy */ + return 0; +} + +static int bcm_umi_nand_remove(struct platform_device *pdev) +{ +#if USE_DMA + nand_dma_term(); +#endif + + /* Release resources, unregister device */ + nand_release(board_mtd); + + /* unmap physical adress */ + iounmap(bcm_umi_io_base); + + /* Free the MTD device structure */ + kfree(board_mtd); + + return 0; +} + +#ifdef CONFIG_PM +static int bcm_umi_nand_suspend(struct platform_device *pdev, + pm_message_t state) +{ + printk(KERN_ERR "MTD NAND suspend is being called\n"); + return 0; +} + +static int bcm_umi_nand_resume(struct platform_device *pdev) +{ + printk(KERN_ERR "MTD NAND resume is being called\n"); + return 0; +} +#else +#define bcm_umi_nand_suspend NULL +#define bcm_umi_nand_resume NULL +#endif + +static struct platform_driver nand_driver = { + .driver = { + .name = "bcm-nand", + .owner = THIS_MODULE, + }, + .probe = bcm_umi_nand_probe, + .remove = bcm_umi_nand_remove, + .suspend = bcm_umi_nand_suspend, + .resume = bcm_umi_nand_resume, +}; + +static int __init nand_init(void) +{ + return platform_driver_register(&nand_driver); +} + +static void __exit nand_exit(void) +{ + platform_driver_unregister(&nand_driver); +} + +module_init(nand_init); +module_exit(nand_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Broadcom"); +MODULE_DESCRIPTION("BCM UMI MTD NAND driver"); diff --git a/drivers/mtd/nand/nand_bcm_umi.c b/drivers/mtd/nand/nand_bcm_umi.c new file mode 100644 index 00000000000..46a6bc9c4b7 --- /dev/null +++ b/drivers/mtd/nand/nand_bcm_umi.c @@ -0,0 +1,149 @@ +/***************************************************************************** +* Copyright 2004 - 2009 Broadcom Corporation. All rights reserved. +* +* Unless you and Broadcom execute a separate written software license +* agreement governing use of this software, this software is licensed to you +* under the terms of the GNU General Public License version 2, available at +* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +* +* Notwithstanding the above, under no circumstances may you combine this +* software in any way with any other Broadcom software provided under a +* license other than the GPL, without Broadcom's express prior written +* consent. +*****************************************************************************/ + +/* ---- Include Files ---------------------------------------------------- */ +#include +#include "nand_bcm_umi.h" +#ifdef BOOT0_BUILD +#include +#endif + +/* ---- External Variable Declarations ----------------------------------- */ +/* ---- External Function Prototypes ------------------------------------- */ +/* ---- Public Variables ------------------------------------------------- */ +/* ---- Private Constants and Types -------------------------------------- */ +/* ---- Private Function Prototypes -------------------------------------- */ +/* ---- Private Variables ------------------------------------------------ */ +/* ---- Private Functions ------------------------------------------------ */ + +#if NAND_ECC_BCH +/**************************************************************************** +* nand_bch_ecc_flip_bit - Routine to flip an errored bit +* +* PURPOSE: +* This is a helper routine that flips the bit (0 -> 1 or 1 -> 0) of the +* errored bit specified +* +* PARAMETERS: +* datap - Container that holds the 512 byte data +* errorLocation - Location of the bit that needs to be flipped +* +* RETURNS: +* None +****************************************************************************/ +static void nand_bcm_umi_bch_ecc_flip_bit(uint8_t *datap, int errorLocation) +{ + int locWithinAByte = (errorLocation & REG_UMI_BCH_ERR_LOC_BYTE) >> 0; + int locWithinAWord = (errorLocation & REG_UMI_BCH_ERR_LOC_WORD) >> 3; + int locWithinAPage = (errorLocation & REG_UMI_BCH_ERR_LOC_PAGE) >> 5; + + uint8_t errorByte = 0; + uint8_t byteMask = 1 << locWithinAByte; + + /* BCH uses big endian, need to change the location + * bits to little endian */ + locWithinAWord = 3 - locWithinAWord; + + errorByte = datap[locWithinAPage * sizeof(uint32_t) + locWithinAWord]; + +#ifdef BOOT0_BUILD + puthexs("\nECC Correct Offset: ", + locWithinAPage * sizeof(uint32_t) + locWithinAWord); + puthexs(" errorByte:", errorByte); + puthex8(" Bit: ", locWithinAByte); +#endif + + if (errorByte & byteMask) { + /* bit needs to be cleared */ + errorByte &= ~byteMask; + } else { + /* bit needs to be set */ + errorByte |= byteMask; + } + + /* write back the value with the fixed bit */ + datap[locWithinAPage * sizeof(uint32_t) + locWithinAWord] = errorByte; +} + +/**************************************************************************** +* nand_correct_page_bch - Routine to correct bit errors when reading NAND +* +* PURPOSE: +* This routine reads the BCH registers to determine if there are any bit +* errors during the read of the last 512 bytes of data + ECC bytes. If +* errors exists, the routine fixes it. +* +* PARAMETERS: +* datap - Container that holds the 512 byte data +* +* RETURNS: +* 0 or greater = Number of errors corrected +* (No errors are found or errors have been fixed) +* -1 = Error(s) cannot be fixed +****************************************************************************/ +int nand_bcm_umi_bch_correct_page(uint8_t *datap, uint8_t *readEccData, + int numEccBytes) +{ + int numErrors; + int errorLocation; + int idx; + uint32_t regValue; + + /* wait for read ECC to be valid */ + regValue = nand_bcm_umi_bch_poll_read_ecc_calc(); + + /* + * read the control status register to determine if there + * are error'ed bits + * see if errors are correctible + */ + if ((regValue & REG_UMI_BCH_CTRL_STATUS_UNCORR_ERR) > 0) { + int i; + + for (i = 0; i < numEccBytes; i++) { + if (readEccData[i] != 0xff) { + /* errors cannot be fixed, return -1 */ + return -1; + } + } + /* If ECC is unprogrammed then we can't correct, + * assume everything OK */ + return 0; + } + + if ((regValue & REG_UMI_BCH_CTRL_STATUS_CORR_ERR) == 0) { + /* no errors */ + return 0; + } + + /* + * Fix errored bits by doing the following: + * 1. Read the number of errors in the control and status register + * 2. Read the error location registers that corresponds to the number + * of errors reported + * 3. Invert the bit in the data + */ + numErrors = (regValue & REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR) >> 20; + + for (idx = 0; idx < numErrors; idx++) { + errorLocation = + REG_UMI_BCH_ERR_LOC_ADDR(idx) & REG_UMI_BCH_ERR_LOC_MASK; + + /* Flip bit */ + nand_bcm_umi_bch_ecc_flip_bit(datap, errorLocation); + } + /* Errors corrected */ + return numErrors; +} +#endif diff --git a/drivers/mtd/nand/nand_bcm_umi.h b/drivers/mtd/nand/nand_bcm_umi.h new file mode 100644 index 00000000000..7cec2cd9785 --- /dev/null +++ b/drivers/mtd/nand/nand_bcm_umi.h @@ -0,0 +1,358 @@ +/***************************************************************************** +* Copyright 2003 - 2009 Broadcom Corporation. All rights reserved. +* +* Unless you and Broadcom execute a separate written software license +* agreement governing use of this software, this software is licensed to you +* under the terms of the GNU General Public License version 2, available at +* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +* +* Notwithstanding the above, under no circumstances may you combine this +* software in any way with any other Broadcom software provided under a +* license other than the GPL, without Broadcom's express prior written +* consent. +*****************************************************************************/ +#ifndef NAND_BCM_UMI_H +#define NAND_BCM_UMI_H + +/* ---- Include Files ---------------------------------------------------- */ +#include +#include +#include + +/* ---- Constants and Types ---------------------------------------------- */ +#if (CFG_GLOBAL_CHIP_FAMILY == CFG_GLOBAL_CHIP_FAMILY_BCMRING) +#define NAND_ECC_BCH (CFG_GLOBAL_CHIP_REV > 0xA0) +#else +#define NAND_ECC_BCH 0 +#endif + +#define CFG_GLOBAL_NAND_ECC_BCH_NUM_BYTES 13 + +#if NAND_ECC_BCH +#ifdef BOOT0_BUILD +#define NAND_ECC_NUM_BYTES 13 +#else +#define NAND_ECC_NUM_BYTES CFG_GLOBAL_NAND_ECC_BCH_NUM_BYTES +#endif +#else +#define NAND_ECC_NUM_BYTES 3 +#endif + +#define NAND_DATA_ACCESS_SIZE 512 + +/* ---- Variable Externs ------------------------------------------ */ +/* ---- Function Prototypes --------------------------------------- */ +int nand_bcm_umi_bch_correct_page(uint8_t *datap, uint8_t *readEccData, + int numEccBytes); + +/* Check in device is ready */ +static inline int nand_bcm_umi_dev_ready(void) +{ + return REG_UMI_NAND_RCSR & REG_UMI_NAND_RCSR_RDY; +} + +/* Wait until device is ready */ +static inline void nand_bcm_umi_wait_till_ready(void) +{ + while (nand_bcm_umi_dev_ready() == 0) + ; +} + +/* Enable Hamming ECC */ +static inline void nand_bcm_umi_hamming_enable_hwecc(void) +{ + /* disable and reset ECC, 512 byte page */ + REG_UMI_NAND_ECC_CSR &= ~(REG_UMI_NAND_ECC_CSR_ECC_ENABLE | + REG_UMI_NAND_ECC_CSR_256BYTE); + /* enable ECC */ + REG_UMI_NAND_ECC_CSR |= REG_UMI_NAND_ECC_CSR_ECC_ENABLE; +} + +#if NAND_ECC_BCH +/* BCH ECC specifics */ +#define ECC_BITS_PER_CORRECTABLE_BIT 13 + +/* Enable BCH Read ECC */ +static inline void nand_bcm_umi_bch_enable_read_hwecc(void) +{ + /* disable and reset ECC */ + REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID; + /* Turn on ECC */ + REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN; +} + +/* Enable BCH Write ECC */ +static inline void nand_bcm_umi_bch_enable_write_hwecc(void) +{ + /* disable and reset ECC */ + REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID; + /* Turn on ECC */ + REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN; +} + +/* Config number of BCH ECC bytes */ +static inline void nand_bcm_umi_bch_config_ecc(uint8_t numEccBytes) +{ + uint32_t nValue; + uint32_t tValue; + uint32_t kValue; + uint32_t numBits = numEccBytes * 8; + + /* disable and reset ECC */ + REG_UMI_BCH_CTRL_STATUS = + REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID | + REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID; + + /* Every correctible bit requires 13 ECC bits */ + tValue = (uint32_t) (numBits / ECC_BITS_PER_CORRECTABLE_BIT); + + /* Total data in number of bits for generating and computing BCH ECC */ + nValue = (NAND_DATA_ACCESS_SIZE + numEccBytes) * 8; + + /* K parameter is used internally. K = N - (T * 13) */ + kValue = nValue - (tValue * ECC_BITS_PER_CORRECTABLE_BIT); + + /* Write the settings */ + REG_UMI_BCH_N = nValue; + REG_UMI_BCH_T = tValue; + REG_UMI_BCH_K = kValue; +} + +/* Pause during ECC read calculation to skip bytes in OOB */ +static inline void nand_bcm_umi_bch_pause_read_ecc_calc(void) +{ + REG_UMI_BCH_CTRL_STATUS = + REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN | + REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC; +} + +/* Resume during ECC read calculation after skipping bytes in OOB */ +static inline void nand_bcm_umi_bch_resume_read_ecc_calc(void) +{ + REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN; +} + +/* Poll read ECC calc to check when hardware completes */ +static inline uint32_t nand_bcm_umi_bch_poll_read_ecc_calc(void) +{ + uint32_t regVal; + + do { + /* wait for ECC to be valid */ + regVal = REG_UMI_BCH_CTRL_STATUS; + } while ((regVal & REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID) == 0); + + return regVal; +} + +/* Poll write ECC calc to check when hardware completes */ +static inline void nand_bcm_umi_bch_poll_write_ecc_calc(void) +{ + /* wait for ECC to be valid */ + while ((REG_UMI_BCH_CTRL_STATUS & REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID) + == 0) + ; +} + +/* Read the OOB and ECC, for kernel write OOB to a buffer */ +#if defined(__KERNEL__) && !defined(STANDALONE) +static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize, + uint8_t *eccCalc, int numEccBytes, uint8_t *oobp) +#else +static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize, + uint8_t *eccCalc, int numEccBytes) +#endif +{ + int eccPos = 0; + int numToRead = 16; /* There are 16 bytes per sector in the OOB */ + + /* ECC is already paused when this function is called */ + + if (pageSize == NAND_DATA_ACCESS_SIZE) { + while (numToRead > numEccBytes) { + /* skip free oob region */ +#if defined(__KERNEL__) && !defined(STANDALONE) + *oobp++ = REG_NAND_DATA8; +#else + REG_NAND_DATA8; +#endif + numToRead--; + } + + /* read ECC bytes before BI */ + nand_bcm_umi_bch_resume_read_ecc_calc(); + + while (numToRead > 11) { +#if defined(__KERNEL__) && !defined(STANDALONE) + *oobp = REG_NAND_DATA8; + eccCalc[eccPos++] = *oobp; + oobp++; +#else + eccCalc[eccPos++] = REG_NAND_DATA8; +#endif + } + + nand_bcm_umi_bch_pause_read_ecc_calc(); + + if (numToRead == 11) { + /* read BI */ +#if defined(__KERNEL__) && !defined(STANDALONE) + *oobp++ = REG_NAND_DATA8; +#else + REG_NAND_DATA8; +#endif + numToRead--; + } + + /* read ECC bytes */ + nand_bcm_umi_bch_resume_read_ecc_calc(); + while (numToRead) { +#if defined(__KERNEL__) && !defined(STANDALONE) + *oobp = REG_NAND_DATA8; + eccCalc[eccPos++] = *oobp; + oobp++; +#else + eccCalc[eccPos++] = REG_NAND_DATA8; +#endif + numToRead--; + } + } else { + /* skip BI */ +#if defined(__KERNEL__) && !defined(STANDALONE) + *oobp++ = REG_NAND_DATA8; +#else + REG_NAND_DATA8; +#endif + numToRead--; + + while (numToRead > numEccBytes) { + /* skip free oob region */ +#if defined(__KERNEL__) && !defined(STANDALONE) + *oobp++ = REG_NAND_DATA8; +#else + REG_NAND_DATA8; +#endif + numToRead--; + } + + /* read ECC bytes */ + nand_bcm_umi_bch_resume_read_ecc_calc(); + while (numToRead) { +#if defined(__KERNEL__) && !defined(STANDALONE) + *oobp = REG_NAND_DATA8; + eccCalc[eccPos++] = *oobp; + oobp++; +#else + eccCalc[eccPos++] = REG_NAND_DATA8; +#endif + numToRead--; + } + } +} + +/* Helper function to write ECC */ +static inline void NAND_BCM_UMI_ECC_WRITE(int numEccBytes, int eccBytePos, + uint8_t *oobp, uint8_t eccVal) +{ + if (eccBytePos <= numEccBytes) + *oobp = eccVal; +} + +/* Write OOB with ECC */ +static inline void nand_bcm_umi_bch_write_oobEcc(uint32_t pageSize, + uint8_t *oobp, int numEccBytes) +{ + uint32_t eccVal = 0xffffffff; + + /* wait for write ECC to be valid */ + nand_bcm_umi_bch_poll_write_ecc_calc(); + + /* + ** Get the hardware ecc from the 32-bit result registers. + ** Read after 512 byte accesses. Format B3B2B1B0 + ** where B3 = ecc3, etc. + */ + + if (pageSize == NAND_DATA_ACCESS_SIZE) { + /* Now fill in the ECC bytes */ + if (numEccBytes >= 13) + eccVal = REG_UMI_BCH_WR_ECC_3; + + /* Usually we skip CM in oob[0,1] */ + NAND_BCM_UMI_ECC_WRITE(numEccBytes, 15, &oobp[0], + (eccVal >> 16) & 0xff); + NAND_BCM_UMI_ECC_WRITE(numEccBytes, 14, &oobp[1], + (eccVal >> 8) & 0xff); + + /* Write ECC in oob[2,3,4] */ + NAND_BCM_UMI_ECC_WRITE(numEccBytes, 13, &oobp[2], + eccVal & 0xff); /* ECC 12 */ + + if (numEccBytes >= 9) + eccVal = REG_UMI_BCH_WR_ECC_2; + + NAND_BCM_UMI_ECC_WRITE(numEccBytes, 12, &oobp[3], + (eccVal >> 24) & 0xff); /* ECC11 */ + NAND_BCM_UMI_ECC_WRITE(numEccBytes, 11, &oobp[4], + (eccVal >> 16) & 0xff); /* ECC10 */ + + /* Always Skip BI in oob[5] */ + } else { + /* Always Skip BI in oob[0] */ + + /* Now fill in the ECC bytes */ + if (numEccBytes >= 13) + eccVal = REG_UMI_BCH_WR_ECC_3; + + /* Usually skip CM in oob[1,2] */ + NAND_BCM_UMI_ECC_WRITE(numEccBytes, 15, &oobp[1], + (eccVal >> 16) & 0xff); + NAND_BCM_UMI_ECC_WRITE(numEccBytes, 14, &oobp[2], + (eccVal >> 8) & 0xff); + + /* Write ECC in oob[3-15] */ + NAND_BCM_UMI_ECC_WRITE(numEccBytes, 13, &oobp[3], + eccVal & 0xff); /* ECC12 */ + + if (numEccBytes >= 9) + eccVal = REG_UMI_BCH_WR_ECC_2; + + NAND_BCM_UMI_ECC_WRITE(numEccBytes, 12, &oobp[4], + (eccVal >> 24) & 0xff); /* ECC11 */ + NAND_BCM_UMI_ECC_WRITE(numEccBytes, 11, &oobp[5], + (eccVal >> 16) & 0xff); /* ECC10 */ + } + + /* Fill in the remainder of ECC locations */ + NAND_BCM_UMI_ECC_WRITE(numEccBytes, 10, &oobp[6], + (eccVal >> 8) & 0xff); /* ECC9 */ + NAND_BCM_UMI_ECC_WRITE(numEccBytes, 9, &oobp[7], + eccVal & 0xff); /* ECC8 */ + + if (numEccBytes >= 5) + eccVal = REG_UMI_BCH_WR_ECC_1; + + NAND_BCM_UMI_ECC_WRITE(numEccBytes, 8, &oobp[8], + (eccVal >> 24) & 0xff); /* ECC7 */ + NAND_BCM_UMI_ECC_WRITE(numEccBytes, 7, &oobp[9], + (eccVal >> 16) & 0xff); /* ECC6 */ + NAND_BCM_UMI_ECC_WRITE(numEccBytes, 6, &oobp[10], + (eccVal >> 8) & 0xff); /* ECC5 */ + NAND_BCM_UMI_ECC_WRITE(numEccBytes, 5, &oobp[11], + eccVal & 0xff); /* ECC4 */ + + if (numEccBytes >= 1) + eccVal = REG_UMI_BCH_WR_ECC_0; + + NAND_BCM_UMI_ECC_WRITE(numEccBytes, 4, &oobp[12], + (eccVal >> 24) & 0xff); /* ECC3 */ + NAND_BCM_UMI_ECC_WRITE(numEccBytes, 3, &oobp[13], + (eccVal >> 16) & 0xff); /* ECC2 */ + NAND_BCM_UMI_ECC_WRITE(numEccBytes, 2, &oobp[14], + (eccVal >> 8) & 0xff); /* ECC1 */ + NAND_BCM_UMI_ECC_WRITE(numEccBytes, 1, &oobp[15], + eccVal & 0xff); /* ECC0 */ +} +#endif + +#endif /* NAND_BCM_UMI_H */ -- cgit v1.2.3